Criticality Safety Evaluation for the TACS at DAF

DOE Office of Scientific and Technical Information (OSTI.GOV)

Percher, C. M.; Heinrichs, D. P.

2011-06-10

Hands-on experimental training in the physical behavior of multiplying systems is one of ten key areas of training required for practitioners to become qualified in the discipline of criticality safety as identified in DOE-STD-1135-99, Guidance for Nuclear Criticality Safety Engineer Training and Qualification. This document is a criticality safety evaluation of the training activities and operations associated with HS-3201-P, Nuclear Criticality 4-Day Training Course (Practical). This course was designed to also address the training needs of nuclear criticality safety professionals under the auspices of the NNSA Nuclear Criticality Safety Program1. The hands-on, or laboratory, portion of the course will utilizemore » the Training Assembly for Criticality Safety (TACS) and will be conducted in the Device Assembly Facility (DAF) at the Nevada Nuclear Security Site (NNSS). The training activities will be conducted by Lawrence Livermore National Laboratory following the requirements of an Integrated Work Sheet (IWS) and associated Safety Plan. Students will be allowed to handle the fissile material under the supervision of an LLNL Certified Fissile Material Handler.« less

The Department of Energy Nuclear Criticality Safety Program

NASA Astrophysics Data System (ADS)

Felty, James R.

2005-05-01

This paper broadly covers key events and activities from which the Department of Energy Nuclear Criticality Safety Program (NCSP) evolved. The NCSP maintains fundamental infrastructure that supports operational criticality safety programs. This infrastructure includes continued development and maintenance of key calculational tools, differential and integral data measurements, benchmark compilation, development of training resources, hands-on training, and web-based systems to enhance information preservation and dissemination. The NCSP was initiated in response to Defense Nuclear Facilities Safety Board Recommendation 97-2, Criticality Safety, and evolved from a predecessor program, the Nuclear Criticality Predictability Program, that was initiated in response to Defense Nuclear Facilities Safety Board Recommendation 93-2, The Need for Critical Experiment Capability. This paper also discusses the role Dr. Sol Pearlstein played in helping the Department of Energy lay the foundation for a robust and enduring criticality safety infrastructure.

Clinician perceptions of personal safety and confidence to manage inpatient aggression in a forensic psychiatric setting.

PubMed

Martin, T; Daffern, M

2006-02-01

Inpatient mental health clinicians need to feel safe in the workplace. They also require confidence in their ability to work with aggressive patients, allowing the provision of therapeutic care while protecting themselves and other patients from psychological and physical harm. The authors initiated this study with the predetermined belief that a comprehensive and integrated organizational approach to inpatient aggression was required to support clinicians and that this approach increased confidence and staff perceptions of personal safety. To assess perceptions of personal safety and confidence, clinicians in a forensic psychiatric hospital were surveyed using an adapted version of the Confidence in Coping With Patient Aggression Instrument. In this study clinicians reported the hospital as safe. They reported confidence in their work with aggressive patients. The factors that most impacted on clinicians' confidence to manage aggression were colleagues' knowledge, experience and skill, management of aggression training, use of prevention and intervention strategies, teamwork and the staff profile. These results are considered with reference to an expanding literature on inpatient aggression. It is concluded that organizational resources, policies and frameworks support clinician perceptions of safety and confidence to manage inpatient aggression. However, how these are valued by clinicians and translated into practice at unit level needs ongoing attention.

Spacecraft utility and the development of confidence intervals for criticality of anomalies

NASA Technical Reports Server (NTRS)

Williams, R. E.

1980-01-01

The concept of spacecraft utility, a measure of its performance in orbit, is discussed and its formulation is described. Performance is defined in terms of the malfunctions that occur and the criticality to the mission of these malfunctions. Different approaches to establishing average or expected values of criticality are discussed and confidence intervals are developed for parameters used in the computation of utility.

Proceedings of the Nuclear Criticality Technology Safety Workshop

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rene G. Sanchez

1998-04-01

This document contains summaries of most of the papers presented at the 1995 Nuclear Criticality Technology Safety Project (NCTSP) meeting, which was held May 16 and 17 at San Diego, Ca. The meeting was broken up into seven sessions, which covered the following topics: (1) Criticality Safety of Project Sapphire; (2) Relevant Experiments For Criticality Safety; (3) Interactions with the Former Soviet Union; (4) Misapplications and Limitations of Monte Carlo Methods Directed Toward Criticality Safety Analyses; (5) Monte Carlo Vulnerabilities of Execution and Interpretation; (6) Monte Carlo Vulnerabilities of Representation; and (7) Benchmark Comparisons.

Simulation experience enhances physical therapist student confidence in managing a patient in the critical care environment.

PubMed

Ohtake, Patricia J; Lazarus, Marcilene; Schillo, Rebecca; Rosen, Michael

2013-02-01

Rehabilitation of patients in critical care environments improves functional outcomes. This finding has led to increased implementation of intensive care unit (ICU) rehabilitation programs, including early mobility, and an associated increased demand for physical therapists practicing in ICUs. Unfortunately, many physical therapists report being inadequately prepared to work in this high-risk environment. Simulation provides focused, deliberate practice in safe, controlled learning environments and may be a method to initiate academic preparation of physical therapists for ICU practice. The purpose of this study was to examine the effect of participation in simulation-based management of a patient with critical illness in an ICU setting on levels of confidence and satisfaction in physical therapist students. A one-group, pretest-posttest, quasi-experimental design was used. Physical therapist students (N=43) participated in a critical care simulation experience requiring technical (assessing bed mobility and pulmonary status), behavioral (patient and interprofessional communication), and cognitive (recognizing a patient status change and initiating appropriate responses) skill performance. Student confidence and satisfaction were surveyed before and after the simulation experience. Students' confidence in their technical, behavioral, and cognitive skill performance increased from "somewhat confident" to "confident" following the critical care simulation experience. Student satisfaction was highly positive, with strong agreement the simulation experience was valuable, reinforced course content, and was a useful educational tool. Limitations of the study were the small sample from one university and a control group was not included. Incorporating a simulated, interprofessional critical care experience into a required clinical course improved physical therapist student confidence in technical, behavioral, and cognitive performance measures and was associated with high

SRTC criticality safety technical review: Nuclear Criticality Safety Evaluation 93-04 enriched uranium receipt

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rathbun, R.

Review of NMP-NCS-930087, {open_quotes}Nuclear Criticality Safety Evaluation 93-04 Enriched Uranium Receipt (U), July 30, 1993, {close_quotes} was requested of SRTC (Savannah River Technology Center) Applied Physics Group. The NCSE is a criticality assessment to determine the mass limit for Engineered Low Level Trench (ELLT) waste uranium burial. The intent is to bury uranium in pits that would be separated by a specified amount of undisturbed soil. The scope of the technical review, documented in this report, consisted of (1) an independent check of the methods and models employed, (2) independent HRXN/KENO-V.a calculations of alternate configurations, (3) application of ANSI/ANS 8.1,more » and (4) verification of WSRC Nuclear Criticality Safety Manual procedures. The NCSE under review concludes that a 500 gram limit per burial position is acceptable to ensure the burial site remains in a critically safe configuration for all normal and single credible abnormal conditions. This reviewer agrees with that conclusion.« less

STORC safety initiative: a multicentre survey on preparedness & confidence in obstetric emergencies.

PubMed

Guise, Jeanne-Marie; Segel, Sally Y; Larison, Kristine; M Jump, Sarah; Constable, Marion; Li, Hong; Osterweil, Patricia; Dieter Zimmer

2010-12-01

Patient safety is a national and international priority. The purpose of this study was to understand clinicians' perceptions of teamwork during obstetric emergencies in clinical practice, to examine factors associated with confidence in responding to obstetric emergencies and to evaluate perceptions about the value of team training to improve preparedness. An anonymous survey was administered to all clinical staff members who respond to obstetric emergencies in seven Oregon hospitals from June 2006 to August 2006. 614 clinical staff (74.5%) responded. While over 90% felt confident that the appropriate clinical staff would respond to emergencies, more than half reported that other clinical staff members were confused about their role during emergencies. Over 84% were confident that emergency drills or simulation-based team training would improve performance. Clinical staff who respond to obstetric emergencies in their practice reported feeling confident that the qualified personnel would respond to an emergency; however, they were less confident that the responders would perform well as a team. They reported that simulation and team training may improve their preparedness and confidence in responding to emergencies.

Nuclear Criticality Safety Data Book

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hollenbach, D. F.

The objective of this document is to support the revision of criticality safety process studies (CSPSs) for the Uranium Processing Facility (UPF) at the Y-12 National Security Complex (Y-12). This design analysis and calculation (DAC) document contains development and justification for generic inputs typically used in Nuclear Criticality Safety (NCS) DACs to model both normal and abnormal conditions of processes at UPF to support CSPSs. This will provide consistency between NCS DACs and efficiency in preparation and review of DACs, as frequently used data are provided in one reference source.

HSE's safety assessment principles for criticality safety.

PubMed

Simister, D N; Finnerty, M D; Warburton, S J; Thomas, E A; Macphail, M R

2008-06-01

The Health and Safety Executive (HSE) published its revised Safety Assessment Principles for Nuclear Facilities (SAPs) in December 2006. The SAPs are primarily intended for use by HSE's inspectors when judging the adequacy of safety cases for nuclear facilities. The revised SAPs relate to all aspects of safety in nuclear facilities including the technical discipline of criticality safety. The purpose of this paper is to set out for the benefit of a wider audience some of the thinking behind the final published words and to provide an insight into the development of UK regulatory guidance. The paper notes that it is HSE's intention that the Safety Assessment Principles should be viewed as a reflection of good practice in the context of interpreting primary legislation such as the requirements under site licence conditions for arrangements for producing an adequate safety case and for producing a suitable and sufficient risk assessment under the Ionising Radiations Regulations 1999 (SI1999/3232 www.opsi.gov.uk/si/si1999/uksi_19993232_en.pdf).

Software Safety Risk in Legacy Safety-Critical Computer Systems

NASA Technical Reports Server (NTRS)

Hill, Janice L.; Baggs, Rhoda

2007-01-01

Safety Standards contain technical and process-oriented safety requirements. Technical requirements are those such as "must work" and "must not work" functions in the system. Process-Oriented requirements are software engineering and safety management process requirements. Address the system perspective and some cover just software in the system > NASA-STD-8719.13B Software Safety Standard is the current standard of interest. NASA programs/projects will have their own set of safety requirements derived from the standard. Safety Cases: a) Documented demonstration that a system complies with the specified safety requirements. b) Evidence is gathered on the integrity of the system and put forward as an argued case. [Gardener (ed.)] c) Problems occur when trying to meet safety standards, and thus make retrospective safety cases, in legacy safety-critical computer systems.

Criticality Safety Basics for INL FMHs and CSOs

DOE Office of Scientific and Technical Information (OSTI.GOV)

V. L. Putman

2012-04-01

Nuclear power is a valuable and efficient energy alternative in our energy-intensive society. However, material that can generate nuclear power has properties that require this material be handled with caution. If improperly handled, a criticality accident could result, which could severely harm workers. This document is a modular self-study guide about Criticality Safety Principles. This guide's purpose it to help you work safely in areas where fissionable nuclear materials may be present, avoiding the severe radiological and programmatic impacts of a criticality accident. It is designed to stress the fundamental physical concepts behind criticality controls and the importance of criticalitymore » safety when handling fissionable materials outside nuclear reactors. This study guide was developed for fissionable-material-handler and criticality-safety-officer candidates to use with related web-based course 00INL189, BEA Criticality Safety Principles, and to help prepare for the course exams. These individuals must understand basic information presented here. This guide may also be useful to other Idaho National Laboratory personnel who must know criticality safety basics to perform their assignments safely or to design critically safe equipment or operations. This guide also includes additional information that will not be included in 00INL189 tests. The additional information is in appendices and paragraphs with headings that begin with 'Did you know,' or with, 'Been there Done that'. Fissionable-material-handler and criticality-safety-officer candidates may review additional information at their own discretion. This guide is revised as needed to reflect program changes, user requests, and better information. Issued in 2006, Revision 0 established the basic text and integrated various programs from former contractors. Revision 1 incorporates operation and program changes implemented since 2006. It also incorporates suggestions, clarifications, and additional

Confidence in the safety of blood for transfusion: the effect of message framing.

PubMed

Farrell, K; Ferguson, E; James, V; Lowe, K C

2001-11-01

Blood transfusion is a universally used, life-saving medical intervention. However, there are increasing concerns among patients about blood safety. This study investigates the effect of message framing, a means of presenting information, on confidence in blood transfusion safety. The same factual information regarding the safety of blood for transfusion was presented to a sample of 254 adult students (donors and nondonors) as either a gain frame (lives saved), a loss frame (lives lost), or a combined frame (a loss frame expressed in a positive context). This provided a basic two-way, between-subjects design with 1) blood donation history (donors vs. nondonors) and 2) message frame (gain, loss, and combined) functioning as the between-groups factors. It was hypothesized that participants would consider blood safer if information was presented as a gain frame. The role of stress appraisals as potential mediators of the framing effect was also explored. As predicted, participants receiving the gain-frame information were significantly more confident of the safety of blood for transfusion than those receiving loss-frame information or both. This was unaffected by donation history or appraisals of stress associated with transfusion. The extent to which blood was considered safe was negatively associated, independently of framing effects, with perceptions that transfusion was threatening. Information about transfusion should be conveyed to patients in a form focusing on the positive, rather than the negative, known facts about the safety of blood.

Becoming Competent, Confident and Critically Aware: Tracing Academic Numeracy Development in Nursing

ERIC Educational Resources Information Center

Galligan, Linda

2013-01-01

This paper describes the mathematical journey of a mature aged nursing student as she struggles to become more academically numerate. Within the paper, academic numeracy is defined around three features: competence, confidence and critical awareness of both the context of mathematics and students' own relationship with mathematics. It then uses…

An Investigation of Proposed Techniques for Quantifying Confidence in Assurance Arguments

NASA Technical Reports Server (NTRS)

Graydon, Patrick J.; Holloway, C. Michael

2016-01-01

The use of safety cases in certification raises the question of assurance argument sufficiency and the issue of confidence (or uncertainty) in the argument's claims. Some researchers propose to model confidence quantitatively and to calculate confidence in argument conclusions. We know of little evidence to suggest that any proposed technique would deliver trustworthy results when implemented by system safety practitioners. Proponents do not usually assess the efficacy of their techniques through controlled experiment or historical study. Instead, they present an illustrative example where the calculation delivers a plausible result. In this paper, we review current proposals, claims made about them, and evidence advanced in favor of them. We then show that proposed techniques can deliver implausible results in some cases. We conclude that quantitative confidence techniques require further validation before they should be recommended as part of the basis for deciding whether an assurance argument justifies fielding a critical system.

Undergraduate baccalaureate nursing students' self-reported confidence in learning about patient safety in the classroom and clinical settings: an annual cross-sectional study (2010-2013).

PubMed

Lukewich, Julia; Edge, Dana S; Tranmer, Joan; Raymond, June; Miron, Jennifer; Ginsburg, Liane; VanDenKerkhof, Elizabeth

2015-05-01

Given the increasing incidence of adverse events and medication errors in healthcare settings, a greater emphasis is being placed on the integration of patient safety competencies into health professional education. Nurses play an important role in preventing and minimizing harm in the healthcare setting. Although patient safety concepts are generally incorporated within many undergraduate nursing programs, the level of students' confidence in learning about patient safety remains unclear. Self-reported patient safety competence has been operationalized as confidence in learning about various dimensions of patient safety. The present study explores nursing students' self-reported confidence in learning about patient safety during their undergraduate baccalaureate nursing program. Cross-sectional study with a nested cohort component conducted annually from 2010 to 2013. Participants were recruited from one Canadian university with a four-year baccalaureate of nursing science program. All students enrolled in the program were eligible to participate. The Health Professional Education in Patient Safety Survey was administered annually. The Health Professional Education in Patient Safety Survey captures how the six dimensions of the Canadian Patient Safety Institute Safety Competencies Framework and broader patient safety issues are addressed in health professional education, as well as respondents' self-reported comfort in speaking up about patient safety issues. In general, nursing students were relatively confident in what they were learning about the clinical dimensions of patient safety, but they were less confident about the sociocultural aspects of patient safety. Confidence in what they were learning in the clinical setting about working in teams, managing adverse events and responding to adverse events declined in upper years. The majority of students did not feel comfortable speaking up about patient safety issues. The nested cohort analysis confirmed these

Aluminum Data Measurements and Evaluation for Criticality Safety Applications

NASA Astrophysics Data System (ADS)

Leal, L. C.; Guber, K. H.; Spencer, R. R.; Derrien, H.; Wright, R. Q.

2002-12-01

The Defense Nuclear Facility Safety Board (DNFSB) Recommendation 93-2 motivated the US Department of Energy (DOE) to develop a comprehensive criticality safety program to maintain and to predict the criticality of systems throughout the DOE complex. To implement the response to the DNFSB Recommendation 93-2, a Nuclear Criticality Safety Program (NCSP) was created including the following tasks: Critical Experiments, Criticality Benchmarks, Training, Analytical Methods, and Nuclear Data. The Nuclear Data portion of the NCSP consists of a variety of differential measurements performed at the Oak Ridge Electron Linear Accelerator (ORELA) at the Oak Ridge National Laboratory (ORNL), data analysis and evaluation using the generalized least-squares fitting code SAMMY in the resolved, unresolved, and high energy ranges, and the development and benchmark testing of complete evaluations for a nuclide for inclusion into the Evaluated Nuclear Data File (ENDF/B). This paper outlines the work performed at ORNL to measure, evaluate, and test the nuclear data for aluminum for applications in criticality safety problems.

How trust in institutions and organizations builds general consumer confidence in the safety of food: a decomposition of effects.

PubMed

de Jonge, J; van Trijp, J C M; van der Lans, I A; Renes, R J; Frewer, L J

2008-09-01

This paper investigates the relationship between general consumer confidence in the safety of food and consumer trust in institutions and organizations. More specifically, using a decompositional regression analysis approach, the extent to which the strength of the relationship between trust and general confidence is dependent upon a particular food chain actor (for example, food manufacturers) is assessed. In addition, the impact of specific subdimensions of trust, such as openness, on consumer confidence are analyzed, as well as interaction effects of actors and subdimensions of trust. The results confirm previous findings, which indicate that a higher level of trust is associated with a higher level of confidence. However, the results from the current study extend on previous findings by disentangling the effects that determine the strength of this relationship into specific components associated with the different actors, the different trust dimensions, and specific combinations of actors and trust dimensions. The results show that trust in food manufacturers influences general confidence more than trust in other food chain actors, and that care is the most important trust dimension. However, the contribution of a particular trust dimension in enhancing general confidence is actor-specific, suggesting that different actors should focus on different trust dimensions when the purpose is to enhance consumer confidence in food safety. Implications for the development of communication strategies that are designed to regain or maintain consumer confidence in the safety of food are discussed.

Comparing the Effects of Simulation-Based and Traditional Teaching Methods on the Critical Thinking Abilities and Self-Confidence of Nursing Students.

PubMed

Alamrani, Mashael Hasan; Alammar, Kamila Ahmad; Alqahtani, Sarah Saad; Salem, Olfat A

2018-06-01

Critical thinking and self-confidence are imperative to success in clinical practice. Educators should use teaching strategies that will help students enhance their critical thinking and self-confidence in complex content such as electrocardiogram interpretation. Therefore, teaching electrocardiogram interpretation to students is important for nurse educators. This study compares the effect of simulation-based and traditional teaching methods on the critical thinking and self-confidence of students during electrocardiogram interpretation sessions. Thirty undergraduate nursing students volunteered to participate in this study. The participants were divided into intervention and control groups, which were taught respectively using the simulation-based and traditional teaching programs. All of the participants were asked to complete the study instrumentpretest and posttest to measure their critical thinking and self-confidence. Improvement was observed in the control and experimental groups with respect to critical thinking and self-confidence, as evidenced by the results of the paired samples t test and the Wilcoxon signed-rank test (p < .05). However, the independent t test and Mann-Whitney U test indicate that the difference between the two groups was not significant (p > .05). This study evaluated an innovative simulation-based teaching method for nurses. No significant differences in outcomes were identified between the simulator-based and traditional teaching methods, indicating that well-implemented educational programs that use either teaching method effectively promote critical thinking and self-confidence in nursing students. Nurse educators are encouraged to design educational plans with clear objectives to improve the critical thinking and self-confidence of their students. Future research should compare the effects of several teaching sessions using each method in a larger sample.

Raising Confident Kids

MedlinePlus

... First Aid & Safety Doctors & Hospitals Videos Recipes for Kids Kids site Sitio para niños How the Body ... Videos for Educators Search English Español Raising Confident Kids KidsHealth / For Parents / Raising Confident Kids What's in ...

A confidence metric for using neurobiological feedback in actor-critic reinforcement learning based brain-machine interfaces

PubMed Central

Prins, Noeline W.; Sanchez, Justin C.; Prasad, Abhishek

2014-01-01

Brain-Machine Interfaces (BMIs) can be used to restore function in people living with paralysis. Current BMIs require extensive calibration that increase the set-up times and external inputs for decoder training that may be difficult to produce in paralyzed individuals. Both these factors have presented challenges in transitioning the technology from research environments to activities of daily living (ADL). For BMIs to be seamlessly used in ADL, these issues should be handled with minimal external input thus reducing the need for a technician/caregiver to calibrate the system. Reinforcement Learning (RL) based BMIs are a good tool to be used when there is no external training signal and can provide an adaptive modality to train BMI decoders. However, RL based BMIs are sensitive to the feedback provided to adapt the BMI. In actor-critic BMIs, this feedback is provided by the critic and the overall system performance is limited by the critic accuracy. In this work, we developed an adaptive BMI that could handle inaccuracies in the critic feedback in an effort to produce more accurate RL based BMIs. We developed a confidence measure, which indicated how appropriate the feedback is for updating the decoding parameters of the actor. The results show that with the new update formulation, the critic accuracy is no longer a limiting factor for the overall performance. We tested and validated the system onthree different data sets: synthetic data generated by an Izhikevich neural spiking model, synthetic data with a Gaussian noise distribution, and data collected from a non-human primate engaged in a reaching task. All results indicated that the system with the critic confidence built in always outperformed the system without the critic confidence. Results of this study suggest the potential application of the technique in developing an autonomous BMI that does not need an external signal for training or extensive calibration. PMID:24904257

Nuclear criticality safety staff training and qualifications at Los Alamos National Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Monahan, S.P.; McLaughlin, T.P.

1997-05-01

Operations involving significant quantities of fissile material have been conducted at Los Alamos National Laboratory continuously since 1943. Until the advent of the Laboratory`s Nuclear Criticality Safety Committee (NCSC) in 1957, line management had sole responsibility for controlling criticality risks. From 1957 until 1961, the NCSC was the Laboratory body which promulgated policy guidance as well as some technical guidance for specific operations. In 1961 the Laboratory created the position of Nuclear Criticality Safety Office (in addition to the NCSC). In 1980, Laboratory management moved the Criticality Safety Officer (and one other LACEF staff member who, by that time, wasmore » also working nearly full-time on criticality safety issues) into the Health Division office. Later that same year the Criticality Safety Group, H-6 (at that time) was created within H-Division, and staffed by these two individuals. The training and education of these individuals in the art of criticality safety was almost entirely self-regulated, depending heavily on technical interactions between each other, as well as NCSC, LACEF, operations, other facility, and broader criticality safety community personnel. Although the Los Alamos criticality safety group has grown both in size and formality of operations since 1980, the basic philosophy that a criticality specialist must be developed through mentoring and self motivation remains the same. Formally, this philosophy has been captured in an internal policy, document ``Conduct of Business in the Nuclear Criticality Safety Group.`` There are no short cuts or substitutes in the development of a criticality safety specialist. A person must have a self-motivated personality, excellent communications skills, a thorough understanding of the principals of neutron physics, a safety-conscious and helpful attitude, a good perspective of real risk, as well as a detailed understanding of process operations and credible upsets.« less

Additional nuclear criticality safety calculations for small-diameter containers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hone, M.J.

This report documents additional criticality safety analysis calculations for small diameter containers, which were originally documented in Reference 1. The results in Reference 1 indicated that some of the small diameter containers did not meet the criteria established for criticality safety at the Portsmouth facility (K{sub eff} +2{sigma}<.95) when modeled under various contingency assumptions of reflection and moderation. The calculations performed in this report reexamine those cases which did not meet the criticality safety criteria. In some cases, unnecessary conservatism is removed, and in other cases mass or assay limits are established for use with the respective containers.

Providing Nuclear Criticality Safety Analysis Education through Benchmark Experiment Evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

John D. Bess; J. Blair Briggs; David W. Nigg

2009-11-01

One of the challenges that today's new workforce of nuclear criticality safety engineers face is the opportunity to provide assessment of nuclear systems and establish safety guidelines without having received significant experience or hands-on training prior to graduation. Participation in the International Criticality Safety Benchmark Evaluation Project (ICSBEP) and/or the International Reactor Physics Experiment Evaluation Project (IRPhEP) provides students and young professionals the opportunity to gain experience and enhance critical engineering skills.

48 CFR 209.270 - Aviation and ship critical safety items.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false Aviation and ship critical safety items. 209.270 Section 209.270 Federal Acquisition Regulations System DEFENSE ACQUISITION... Requirements 209.270 Aviation and ship critical safety items. ...

48 CFR 209.270 - Aviation and ship critical safety items.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Aviation and ship critical safety items. 209.270 Section 209.270 Federal Acquisition Regulations System DEFENSE ACQUISITION... Requirements 209.270 Aviation and ship critical safety items. ...

48 CFR 209.270 - Aviation and ship critical safety items.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false Aviation and ship critical safety items. 209.270 Section 209.270 Federal Acquisition Regulations System DEFENSE ACQUISITION... Requirements 209.270 Aviation and ship critical safety items. ...

48 CFR 209.270 - Aviation and ship critical safety items.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Aviation and ship critical safety items. 209.270 Section 209.270 Federal Acquisition Regulations System DEFENSE ACQUISITION... Requirements 209.270 Aviation and ship critical safety items. ...

48 CFR 209.270 - Aviation and ship critical safety items.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Requirements 209.270 Aviation and ship critical safety items. ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Aviation and ship critical safety items. 209.270 Section 209.270 Federal Acquisition Regulations System DEFENSE ACQUISITION...

Tank waste remediation system nuclear criticality safety program management review

DOE Office of Scientific and Technical Information (OSTI.GOV)

BRADY RAAP, M.C.

1999-06-24

This document provides the results of an internal management review of the Tank Waste Remediation System (TWRS) criticality safety program, performed in advance of the DOE/RL assessment for closure of the TWRS Nuclear Criticality Safety Issue, March 1994. Resolution of the safety issue was identified as Hanford Federal Facility Agreement and Consent Order (Tri-Party Agreement) Milestone M-40-12, due September 1999.

Criticality Safety Evaluation of the LLNL Inherently Safe Subcritical Assembly (ISSA)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Percher, Catherine

2012-06-19

The LLNL Nuclear Criticality Safety Division has developed a training center to illustrate criticality safety and reactor physics concepts through hands-on experimental training. The experimental assembly, the Inherently Safe Subcritical Assembly (ISSA), uses surplus highly enriched research reactor fuel configured in a water tank. The training activities will be conducted by LLNL following the requirements of an Integration Work Sheet (IWS) and associated Safety Plan. Students will be allowed to handle the fissile material under the supervision of LLNL instructors. This report provides the technical criticality safety basis for instructional operations with the ISSA experimental assembly.

Overview of Risk Mitigation for Safety-Critical Computer-Based Systems

NASA Technical Reports Server (NTRS)

Torres-Pomales, Wilfredo

2015-01-01

This report presents a high-level overview of a general strategy to mitigate the risks from threats to safety-critical computer-based systems. In this context, a safety threat is a process or phenomenon that can cause operational safety hazards in the form of computational system failures. This report is intended to provide insight into the safety-risk mitigation problem and the characteristics of potential solutions. The limitations of the general risk mitigation strategy are discussed and some options to overcome these limitations are provided. This work is part of an ongoing effort to enable well-founded assurance of safety-related properties of complex safety-critical computer-based aircraft systems by developing an effective capability to model and reason about the safety implications of system requirements and design.

48 CFR 252.209-7010 - Critical Safety Items.

Code of Federal Regulations, 2014 CFR

2014-10-01

... personal injury or loss of life; or (iii) An uncommanded engine shutdown that jeopardizes safety. Design... personal injury or loss of life. (b) Identification of critical safety items. One or more of the items... control activity: (Insert additional lines as necessary) (c) Heightened quality assurance surveillance...

48 CFR 252.209-7010 - Critical Safety Items.

Code of Federal Regulations, 2013 CFR

2013-10-01

... personal injury or loss of life; or (iii) An uncommanded engine shutdown that jeopardizes safety. Design... personal injury or loss of life. (b) Identification of critical safety items. One or more of the items... control activity: (Insert additional lines as necessary) (c) Heightened quality assurance surveillance...

48 CFR 252.209-7010 - Critical Safety Items.

Code of Federal Regulations, 2012 CFR

2012-10-01

... personal injury or loss of life; or (iii) An uncommanded engine shutdown that jeopardizes safety. Design... personal injury or loss of life. (b) Identification of critical safety items. One or more of the items... control activity: (Insert additional lines as necessary) (c) Heightened quality assurance surveillance...

48 CFR 252.209-7010 - Critical Safety Items.

Code of Federal Regulations, 2011 CFR

2011-10-01

... personal injury or loss of life; or (iii) An uncommanded engine shutdown that jeopardizes safety. Design... personal injury or loss of life. (b) Identification of critical safety items. One or more of the items... control activity: (Insert additional lines as necessary) (c) Heightened quality assurance surveillance...

Individual, Cultural and Structural Predictors of Vaccine Safety Confidence and Influenza Vaccination Among Hispanic Female Subgroups.

PubMed

Moran, Meghan Bridgid; Chatterjee, Joyee S; Frank, Lauren B; Murphy, Sheila T; Zhao, Nan; Chen, Nancy; Ball-Rokeach, Sandra

2017-08-01

Rates of influenza vaccination among US Hispanics are lower than for non-Hispanic whites, yet little is known about factors affecting vaccination in this population. Additionally, although Hispanics are a diverse population with culturally distinct subgroups, they are often treated as a homogenous population. This study (1) examines how confidence in vaccine safety and influenza vaccine use vary by Hispanic subgroup and (2) identifies individual, cultural and structural correlates of these outcomes. This study analyzed survey data from 1565 Hispanic women who were recruited at clinic- and community-based sites in Los Angeles. Education, healthcare coverage, acculturation, fatalism, and religiosity were predictors of influenza vaccination behavior and predictors varied by subgroup. These findings provide guidance for how influenza vaccine promotion efforts can be developed for Hispanic subgroups. Confidence in the safety of a vaccine is a major predictor of flu vaccination and an important modifiable target for intervention.

76 FR 52138 - Defense Federal Acquisition Regulation Supplement; Identification of Critical Safety Items (DFARS...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-19

...; or (iii) An uncommanded engine shutdown that jeopardizes safety. Design control activity. (i) With... aviation critical safety item is to be used; and (ii) With respect to a ship critical safety item, means...-AG92 Defense Federal Acquisition Regulation Supplement; Identification of Critical Safety Items (DFARS...

Nuclear Data Activities in Support of the DOE Nuclear Criticality Safety Program

NASA Astrophysics Data System (ADS)

Westfall, R. M.; McKnight, R. D.

2005-05-01

The DOE Nuclear Criticality Safety Program (NCSP) provides the technical infrastructure maintenance for those technologies applied in the evaluation and performance of safe fissionable-material operations in the DOE complex. These technologies include an Analytical Methods element for neutron transport as well as the development of sensitivity/uncertainty methods, the performance of Critical Experiments, evaluation and qualification of experiments as Benchmarks, and a comprehensive Nuclear Data program coordinated by the NCSP Nuclear Data Advisory Group (NDAG). The NDAG gathers and evaluates differential and integral nuclear data, identifies deficiencies, and recommends priorities on meeting DOE criticality safety needs to the NCSP Criticality Safety Support Group (CSSG). Then the NDAG identifies the required resources and unique capabilities for meeting these needs, not only for performing measurements but also for data evaluation with nuclear model codes as well as for data processing for criticality safety applications. The NDAG coordinates effort with the leadership of the National Nuclear Data Center, the Cross Section Evaluation Working Group (CSEWG), and the Working Party on International Evaluation Cooperation (WPEC) of the OECD/NEA Nuclear Science Committee. The overall objective is to expedite the issuance of new data and methods to the DOE criticality safety user. This paper describes these activities in detail, with examples based upon special studies being performed in support of criticality safety for a variety of DOE operations.

Investigation of criticality safety control infraction data at a nuclear facility

DOE PAGES

Cournoyer, Michael E.; Merhege, James F.; Costa, David A.; ...

2014-10-27

Chemical and metallurgical operations involving plutonium and other nuclear materials account for most activities performed at the LANL's Plutonium Facility (PF-4). The presence of large quantities of fissile materials in numerous forms at PF-4 makes it necessary to maintain an active criticality safety program. The LANL Nuclear Criticality Safety (NCS) Program provides guidance to enable efficient operations while ensuring prevention of criticality accidents in the handling, storing, processing and transportation of fissionable material at PF-4. In order to achieve and sustain lower criticality safety control infraction (CSCI) rates, PF-4 operations are continuously improved, through the use of Lean Manufacturing andmore » Six Sigma (LSS) business practices. Employing LSS, statistically significant variations (trends) can be identified in PF-4 CSCI reports. In this study, trends have been identified in the NCS Program using the NCS Database. An output metric has been developed that measures ADPSM Management progress toward meeting its NCS objectives and goals. Using a Pareto Chart, the primary CSCI attributes have been determined in order of those requiring the most management support. Data generated from analysis of CSCI data help identify and reduce number of corresponding attributes. In-field monitoring of CSCI's contribute to an organization's scientific and technological excellence by providing information that can be used to improve criticality safety operation safety. This increases technical knowledge and augments operational safety.« less

Lecture Notes on Criticality Safety Validation Using MCNP & Whisper

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, Forrest B.; Rising, Michael Evan; Alwin, Jennifer Louise

Training classes for nuclear criticality safety, MCNP documentation. The need for, and problems surrounding, validation of computer codes and data area considered first. Then some background for MCNP & Whisper is given--best practices for Monte Carlo criticality calculations, neutron spectra, S(α,β) thermal neutron scattering data, nuclear data sensitivities, covariance data, and correlation coefficients. Whisper is computational software designed to assist the nuclear criticality safety analyst with validation studies with the Monte Carlo radiation transport package MCNP. Whisper's methodology (benchmark selection – C k's, weights; extreme value theory – bias, bias uncertainty; MOS for nuclear data uncertainty – GLLS) and usagemore » are discussed.« less

Promoting young children's interpersonal safety knowledge, intentions, confidence, and protective behavior skills: Outcomes of a randomized controlled trial.

PubMed

White, Codi; Shanley, Dianne C; Zimmer-Gembeck, Melanie J; Walsh, Kerryann; Hawkins, Russell; Lines, Katrina; Webb, Haley

2018-06-11

Promoting young children's interpersonal safety knowledge, intentions confidence and skills is the goal of many child maltreatment prevention programs; however, evaluation of their effectiveness has been limited. In this study, a randomized controlled trial was conducted examining the effectiveness of the Australian protective behaviors program, Learn to be safe with Emmy and friends™ compared to a waitlist condition. In total, 611 Australian children in Grade 1 (5-7 years; 50% male) participated, with assessments at Pre-intervention, Post-intervention and a 6-month follow-up. This study also included a novel assessment of interpersonal safety skills through the Observed Protective Behaviors Test (OPBT). Analyses showed participating in Learn to be safe with Emmy and friends™ was effective post-program in improving interpersonal safety knowledge (child and parent-rated) and parent-rated interpersonal safety skills. These benefits were retained at the 6-month follow-up, with participating children also reporting increased disclosure confidence. However, Learn to be safe with Emmy and friends™ participation did not significantly impact children's disclosure intentions, safety identification skills, or interpersonal safety skills as measured by the OPBT. Future research may seek to evaluate the effect of further parent and teacher integration into training methods and increased use of behavioral rehearsal and modelling to more effectively target specific disclosure intentions and skills. Copyright © 2018 Elsevier Ltd. All rights reserved.

MISSION: Mission and Safety Critical Support Environment. Executive overview

NASA Technical Reports Server (NTRS)

Mckay, Charles; Atkinson, Colin

1992-01-01

For mission and safety critical systems it is necessary to: improve definition, evolution and sustenance techniques; lower development and maintenance costs; support safe, timely and affordable system modifications; and support fault tolerance and survivability. The goal of the MISSION project is to lay the foundation for a new generation of integrated systems software providing a unified infrastructure for mission and safety critical applications and systems. This will involve the definition of a common, modular target architecture and a supporting infrastructure.

49 CFR 229.309 - Safety-critical changes and failures.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false Safety-critical changes and failures. 229.309 Section 229.309 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Locomotive Electronics § 229...

49 CFR 229.309 - Safety-critical changes and failures.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 4 2012-10-01 2012-10-01 false Safety-critical changes and failures. 229.309 Section 229.309 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Locomotive Electronics § 229...

49 CFR 229.309 - Safety-critical changes and failures.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false Safety-critical changes and failures. 229.309 Section 229.309 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Locomotive Electronics § 229...

DOE standard 3009 - a reasoned, practical approach to integrating criticality safety into SARs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vessard, S.G.

1995-12-31

In the past there have been efforts by the U.S. Department of Energy (DOE) to provide guidance on those elements that should be included in a facility`s safety analysis report (SAR). In particular, there are two DOE Orders (5480.23, {open_quotes}Nuclear Safety Analysis Reports,{close_quotes} and 5480.24, {open_quotes}Nuclear Criticality Safety{close_quotes}), an interpretive guidance document (NE-70, Interpretive Guidance for DOE Order 5480.24, {open_quotes}Nuclear Criticality Safety{close_quotes}), and DOE Standard DOE-STD-3009-94 {open_quotes}Preparation Guide for U.S. Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports.{close_quotes} Of these, the most practical and useful (pertaining to the application of criticality safety) is DOE-STD-3009-94. This paper is a reviewmore » of Chapters 3, 4, and 6 of this standard and how they provide very clear, helpful, and reasoned criticality safety guidance.« less

Cultural safety and the challenges of translating critically oriented knowledge in practice.

PubMed

Browne, Annette J; Varcoe, Colleen; Smye, Victoria; Reimer-Kirkham, Sheryl; Lynam, M Judith; Wong, Sabrina

2009-07-01

Cultural safety is a relatively new concept that has emerged in the New Zealand nursing context and is being taken up in various ways in Canadian health care discourses. Our research team has been exploring the relevance of cultural safety in the Canadian context, most recently in relation to a knowledge-translation study conducted with nurses practising in a large tertiary hospital. We were drawn to using cultural safety because we conceptualized it as being compatible with critical theoretical perspectives that foster a focus on power imbalances and inequitable social relationships in health care; the interrelated problems of culturalism and racialization; and a commitment to social justice as central to the social mandate of nursing. Engaging in this knowledge-translation study has provided new perspectives on the complexities, ambiguities and tensions that need to be considered when using the concept of cultural safety to draw attention to racialization, culturalism, and health and health care inequities. The philosophic analysis discussed in this paper represents an epistemological grounding for the concept of cultural safety that links directly to particular moral ends with social justice implications. Although cultural safety is a concept that we have firmly positioned within the paradigm of critical inquiry, ambiguities associated with the notions of 'culture', 'safety', and 'cultural safety' need to be anticipated and addressed if they are to be effectively used to draw attention to critical social justice issues in practice settings. Using cultural safety in practice settings to draw attention to and prompt critical reflection on politicized knowledge, therefore, brings an added layer of complexity. To address these complexities, we propose that what may be required to effectively use cultural safety in the knowledge-translation process is a 'social justice curriculum for practice' that would foster a philosophical stance of critical inquiry at both the

Parametric Criticality Safety Calculations for Arrays of TRU Waste Containers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gough, Sean T.

The Nuclear Criticality Safety Division (NCSD) has performed criticality safety calculations for finite and infinite arrays of transuranic (TRU) waste containers. The results of these analyses may be applied in any technical area onsite (e.g., TA-54, TA-55, etc.), as long as the assumptions herein are met. These calculations are designed to update the existing reference calculations for waste arrays documented in Reference 1, in order to meet current guidance on calculational methodology.

Recognising safety critical events: can automatic video processing improve naturalistic data analyses?

PubMed

Dozza, Marco; González, Nieves Pañeda

2013-11-01

New trends in research on traffic accidents include Naturalistic Driving Studies (NDS). NDS are based on large scale data collection of driver, vehicle, and environment information in real world. NDS data sets have proven to be extremely valuable for the analysis of safety critical events such as crashes and near crashes. However, finding safety critical events in NDS data is often difficult and time consuming. Safety critical events are currently identified using kinematic triggers, for instance searching for deceleration below a certain threshold signifying harsh braking. Due to the low sensitivity and specificity of this filtering procedure, manual review of video data is currently necessary to decide whether the events identified by the triggers are actually safety critical. Such reviewing procedure is based on subjective decisions, is expensive and time consuming, and often tedious for the analysts. Furthermore, since NDS data is exponentially growing over time, this reviewing procedure may not be viable anymore in the very near future. This study tested the hypothesis that automatic processing of driver video information could increase the correct classification of safety critical events from kinematic triggers in naturalistic driving data. Review of about 400 video sequences recorded from the events, collected by 100 Volvo cars in the euroFOT project, suggested that drivers' individual reaction may be the key to recognize safety critical events. In fact, whether an event is safety critical or not often depends on the individual driver. A few algorithms, able to automatically classify driver reaction from video data, have been compared. The results presented in this paper show that the state of the art subjective review procedures to identify safety critical events from NDS can benefit from automated objective video processing. In addition, this paper discusses the major challenges in making such video analysis viable for future NDS and new potential

University education and nuclear criticality safety professionals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilson, R.E.; Stachowiak, R.V.; Knief, R.A.

1996-12-31

The problem of developing a productive criticality safety specialist at a nuclear fuel facility has long been with us. The normal practice is to hire a recent undergraduate or graduate degree recipient and invest at least a decade in on-the-job training. In the early 1980s, the U.S. Department of Energy (DOE) developed a model intern program in an attempt to speed up the process. The program involved working at assigned projects for extended periods at a working critical mass laboratory, a methods development group, and a fuel cycle facility. This never gained support as it involved extended time away frommore » the job. At the Rocky Flats Environmental Technology Site, the training method is currently the traditional one involving extensive experience. The flaw is that the criticality safety staff turnover has been such that few individuals continue for the decade some consider necessary for maturity in the discipline. To maintain quality evaluations and controls as well as interpretation decisions, extensive group review is used. This has proved costly to the site and professionally unsatisfying to the current staff. The site contractor has proposed a training program to remedy the basic problem.« less

Critical Characteristics of Radiation Detection System Components to be Dedicated for use in Safety Class and Safety Significant System

DOE Office of Scientific and Technical Information (OSTI.GOV)

DAVIS, S.J.

2000-05-25

This document identifies critical characteristics of components to be dedicated for use in Safety Class (SC) or Safety Significant (SS) Systems, Structures, or Components (SSCs). This document identifies the requirements for the components of the common radiation area monitor alarm in the WESF pool cell. These are procured as Commercial Grade Items (CGI), with the qualification testing and formal dedication to be performed at the Waste Encapsulation Storage Facility (WESF), in safety class, safety significant systems. System modifications are to be performed in accordance with the instructions provided on ECN 658230. Components for this change are commercially available and interchangeablemore » with the existing alarm configuration This document focuses on the operational requirements for alarm, declaration of the safety classification, identification of critical characteristics, and interpretation of requirements for procurement. Critical characteristics are identified herein and must be verified, followed by formal dedication, prior to the components being used in safety related applications.« less

Sure, or unsure? Measuring students' confidence and the potential impact on patient safety in multiple-choice questions.

PubMed

Rangel, Rafael Henrique; Möller, Leona; Sitter, Helmut; Stibane, Tina; Strzelczyk, Adam

2017-11-01

Multiple-choice questions (MCQs) provide useful information about correct and incorrect answers, but they do not offer information about students' confidence. Ninety and another 81 medical students participated each in a curricular neurology multiple-choice exam and indicated their confidence for every single MCQ. Each MCQ had a defined level of potential clinical impact on patient safety (uncritical, risky, harmful). Our first objective was to detect informed (IF), guessed (GU), misinformed (MI), and uninformed (UI) answers. Further, we evaluated whether there were significant differences for confidence at correct and incorrect answers. Then, we explored if clinical impact had a significant influence on students' confidence. There were 1818 IF, 635 GU, 71 MI, and 176 UI answers in exam I and 1453 IF, 613 GU, 92 MI, and 191 UI answers in exam II. Students' confidence was significantly higher for correct than for incorrect answers at both exams (p < 0.001). For exam I, students' confidence was significantly higher for incorrect harmful than for incorrect risky classified MCQs (p = 0.01). At exam II, students' confidence was significantly higher for incorrect harmful than for incorrect benign (p < 0.01) and significantly higher for correct benign than for correct harmful categorized MCQs (p = 0.01). We were pleased to see that there were more informed than guessed, more uninformed than misinformed answers and higher students' confidence for correct than for incorrect answers. Our expectation that students state higher confidence in correct and harmful and lower confidence in incorrect and harmful MCQs could not be confirmed.

Analyzing Software Requirements Errors in Safety-Critical, Embedded Systems

NASA Technical Reports Server (NTRS)

Lutz, Robyn R.

1993-01-01

This paper analyzes the root causes of safety-related software errors in safety-critical, embedded systems. The results show that software errors identified as potentially hazardous to the system tend to be produced by different error mechanisms than non- safety-related software errors. Safety-related software errors are shown to arise most commonly from (1) discrepancies between the documented requirements specifications and the requirements needed for correct functioning of the system and (2) misunderstandings of the software's interface with the rest of the system. The paper uses these results to identify methods by which requirements errors can be prevented. The goal is to reduce safety-related software errors and to enhance the safety of complex, embedded systems.

Safety impacts of bicycle infrastructure: A critical review.

PubMed

DiGioia, Jonathan; Watkins, Kari Edison; Xu, Yanzhi; Rodgers, Michael; Guensler, Randall

2017-06-01

This paper takes a critical look at the present state of bicycle infrastructure treatment safety research, highlighting data needs. Safety literature relating to 22 bicycle treatments is examined, including findings, study methodologies, and data sources used in the studies. Some preliminary conclusions related to research efficacy are drawn from the available data and findings in the research. While the current body of bicycle safety literature points toward some defensible conclusions regarding the safety and effectiveness of certain bicycle treatments, such as bike lanes and removal of on-street parking, the vast majority treatments are still in need of rigorous research. Fundamental questions arise regarding appropriate exposure measures, crash measures, and crash data sources. This research will aid transportation departments with regard to decisions about bicycle infrastructure and guide future research efforts toward understanding safety impacts of bicycle infrastructure. Copyright © 2017 Elsevier Ltd and National Safety Council. All rights reserved.

A Software Safety Risk Taxonomy for Use in Retrospective Safety Cases

NASA Technical Reports Server (NTRS)

Hill, Janice L.

2007-01-01

Safety standards contain technical and process-oriented safely requirements. The best time to include these requirements is early in the development lifecycle of the system. When software safety requirements are levied on a legacy system after the fact, a retrospective safety case will need to be constructed for the software in the system. This can be a difficult task because there may be few to no art facts available to show compliance to the software safely requirements. The risks associated with not meeting safely requirements in a legacy safely-critical computer system must be addressed to give confidence for reuse. This paper introduces a proposal for a software safely risk taxonomy for legacy safely-critical computer systems, by specializing the Software Engineering Institute's 'Software Development Risk Taxonomy' with safely elements and attributes.

Unifying interdisciplinary education: designing and implementing an intern simulation educational curriculum to increase confidence in critical care from PGY1 to PGY2.

PubMed

Bullard, Mark J; Leuck, Jo Anna; Howley, Lisa D

2017-11-06

A longitudinal, multidisciplinary critical care simulation curriculum was developed and implemented within a teaching hospital to address the need for consistent, safe, efficient, and unified critical care training within graduate medical education. Primary goals were to increase learner confidence in critical care topics and procedural skills across all specialties. Secondary goals included improving communication skills and obtaining a high level of learner satisfaction. All interns caring for adult patients within our hospital participated in three 4-h simulation-based sessions scheduled over the second half of their intern year. Pre- and postcurricular surveys evaluated self-confidence in critical care topics, procedures, and communication skills. The Debriefing Assessment for Simulation in Healthcare Student Version (DASH-SV) Short Form was used to evaluate facilitator debriefing. Data were compared with Wilcoxon rank sum and signed rank test. Pre- and postcurricular surveys were collected from 51 of 52 interns (98% response rate) in curricular year 1 and 59 of 59 interns (100% response rate) in curricular year 2 in six programs within the hospital. Resident confidence significantly improved in all areas (p < .05). DASH-SV demonstrated overall effective facilitator debriefing and > 75% of interns in both curricular years 1 and 2 expressed a desire for future educational sessions. The implemented curriculum increased learner confidence in select critical care topics, procedures, and communication skills and demonstrated a high level of learner satisfaction. The curriculum has expanded to learners from three other teaching hospitals within our system to unify critical care education for all interns caring for adult patients.

Taking ownership of safety. What are the active ingredients of safety coaching and how do they impact safety outcomes in critical offshore working environments?

PubMed

Krauesslar, Victoria; Avery, Rachel E; Passmore, Jonathan

2015-01-01

Safety coaching interventions have become a common feature in the safety critical offshore working environments of the North Sea. Whilst the beneficial impact of coaching as an organizational tool has been evidenced, there remains a question specifically over the use of safety coaching and its impact on behavioural change and producing safe working practices. A series of 24 semi-structured interviews were conducted with three groups of experts in the offshore industry: safety coaches, offshore managers and HSE directors. Using a thematic analysis approach, several significant themes were identified across the three expert groups including connecting with and creating safety ownership in the individual, personal significance and humanisation, ingraining safety and assessing and measuring a safety coach's competence. Results suggest clear utility of safety coaching when applied by safety coaches with appropriate coach training and understanding of safety issues in an offshore environment. The current work has found that the use of safety coaching in the safety critical offshore oil and gas industry is a powerful tool in managing and promoting a culture of safety and care.

Natural Language Interface for Safety Certification of Safety-Critical Software

NASA Technical Reports Server (NTRS)

Denney, Ewen; Fischer, Bernd

2011-01-01

Model-based design and automated code generation are being used increasingly at NASA. The trend is to move beyond simulation and prototyping to actual flight code, particularly in the guidance, navigation, and control domain. However, there are substantial obstacles to more widespread adoption of code generators in such safety-critical domains. Since code generators are typically not qualified, there is no guarantee that their output is correct, and consequently the generated code still needs to be fully tested and certified. The AutoCert generator plug-in supports the certification of automatically generated code by formally verifying that the generated code is free of different safety violations, by constructing an independently verifiable certificate, and by explaining its analysis in a textual form suitable for code reviews.

Understanding public confidence in government to prevent terrorist attacks.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baldwin, T. E.; Ramaprasad, A,; Samsa, M. E.

A primary goal of terrorism is to instill a sense of fear and vulnerability in a population and to erode its confidence in government and law enforcement agencies to protect citizens against future attacks. In recognition of its importance, the Department of Homeland Security includes public confidence as one of the principal metrics used to assess the consequences of terrorist attacks. Hence, a detailed understanding of the variations in public confidence among individuals, terrorist event types, and as a function of time is critical to developing this metric. In this exploratory study, a questionnaire was designed, tested, and administered tomore » small groups of individuals to measure public confidence in the ability of federal, state, and local governments and their public safety agencies to prevent acts of terrorism. Data was collected from three groups before and after they watched mock television news broadcasts portraying a smallpox attack, a series of suicide bomber attacks, a refinery explosion attack, and cyber intrusions on financial institutions, resulting in identity theft. Our findings are: (a) although the aggregate confidence level is low, there are optimists and pessimists; (b) the subjects are discriminating in interpreting the nature of a terrorist attack, the time horizon, and its impact; (c) confidence recovery after a terrorist event has an incubation period; and (d) the patterns of recovery of confidence of the optimists and the pessimists are different. These findings can affect the strategy and policies to manage public confidence after a terrorist event.« less

Agile Methods for Open Source Safety-Critical Software.

PubMed

Gary, Kevin; Enquobahrie, Andinet; Ibanez, Luis; Cheng, Patrick; Yaniv, Ziv; Cleary, Kevin; Kokoori, Shylaja; Muffih, Benjamin; Heidenreich, John

2011-08-01

The introduction of software technology in a life-dependent environment requires the development team to execute a process that ensures a high level of software reliability and correctness. Despite their popularity, agile methods are generally assumed to be inappropriate as a process family in these environments due to their lack of emphasis on documentation, traceability, and other formal techniques. Agile methods, notably Scrum, favor empirical process control, or small constant adjustments in a tight feedback loop. This paper challenges the assumption that agile methods are inappropriate for safety-critical software development. Agile methods are flexible enough to encourage the rightamount of ceremony; therefore if safety-critical systems require greater emphasis on activities like formal specification and requirements management, then an agile process will include these as necessary activities. Furthermore, agile methods focus more on continuous process management and code-level quality than classic software engineering process models. We present our experiences on the image-guided surgical toolkit (IGSTK) project as a backdrop. IGSTK is an open source software project employing agile practices since 2004. We started with the assumption that a lighter process is better, focused on evolving code, and only adding process elements as the need arose. IGSTK has been adopted by teaching hospitals and research labs, and used for clinical trials. Agile methods have matured since the academic community suggested they are not suitable for safety-critical systems almost a decade ago, we present our experiences as a case study for renewing the discussion.

Planning the Unplanned Experiment: Assessing the Efficacy of Standards for Safety Critical Software

NASA Technical Reports Server (NTRS)

Graydon, Patrick J.; Holloway, C. Michael

2015-01-01

We need well-founded means of determining whether software is t for use in safety-critical applications. While software in industries such as aviation has an excellent safety record, the fact that software aws have contributed to deaths illustrates the need for justi ably high con dence in software. It is often argued that software is t for safety-critical use because it conforms to a standard for software in safety-critical systems. But little is known about whether such standards `work.' Reliance upon a standard without knowing whether it works is an experiment; without collecting data to assess the standard, this experiment is unplanned. This paper reports on a workshop intended to explore how standards could practicably be assessed. Planning the Unplanned Experiment: Assessing the Ecacy of Standards for Safety Critical Software (AESSCS) was held on 13 May 2014 in conjunction with the European Dependable Computing Conference (EDCC). We summarize and elaborate on the workshop's discussion of the topic, including both the presented positions and the dialogue that ensued.

Cyber Security Threats to Safety-Critical, Space-Based Infrastructures

NASA Astrophysics Data System (ADS)

Johnson, C. W.; Atencia Yepez, A.

2012-01-01

Space-based systems play an important role within national critical infrastructures. They are being integrated into advanced air-traffic management applications, rail signalling systems, energy distribution software etc. Unfortunately, the end users of communications, location sensing and timing applications often fail to understand that these infrastructures are vulnerable to a wide range of security threats. The following pages focus on concerns associated with potential cyber-attacks. These are important because future attacks may invalidate many of the safety assumptions that support the provision of critical space-based services. These safety assumptions are based on standard forms of hazard analysis that ignore cyber-security considerations This is a significant limitation when, for instance, security attacks can simultaneously exploit multiple vulnerabilities in a manner that would never occur without a deliberate enemy seeking to damage space based systems and ground infrastructures. We address this concern through the development of a combined safety and security risk assessment methodology. The aim is to identify attack scenarios that justify the allocation of additional design resources so that safety barriers can be strengthened to increase our resilience against security threats.

Using argument notation to engineer biological simulations with increased confidence

PubMed Central

Alden, Kieran; Andrews, Paul S.; Polack, Fiona A. C.; Veiga-Fernandes, Henrique; Coles, Mark C.; Timmis, Jon

2015-01-01

The application of computational and mathematical modelling to explore the mechanics of biological systems is becoming prevalent. To significantly impact biological research, notably in developing novel therapeutics, it is critical that the model adequately represents the captured system. Confidence in adopting in silico approaches can be improved by applying a structured argumentation approach, alongside model development and results analysis. We propose an approach based on argumentation from safety-critical systems engineering, where a system is subjected to a stringent analysis of compliance against identified criteria. We show its use in examining the biological information upon which a model is based, identifying model strengths, highlighting areas requiring additional biological experimentation and providing documentation to support model publication. We demonstrate our use of structured argumentation in the development of a model of lymphoid tissue formation, specifically Peyer's Patches. The argumentation structure is captured using Artoo (www.york.ac.uk/ycil/software/artoo), our Web-based tool for constructing fitness-for-purpose arguments, using a notation based on the safety-critical goal structuring notation. We show how argumentation helps in making the design and structured analysis of a model transparent, capturing the reasoning behind the inclusion or exclusion of each biological feature and recording assumptions, as well as pointing to evidence supporting model-derived conclusions. PMID:25589574

Using argument notation to engineer biological simulations with increased confidence.

PubMed

Alden, Kieran; Andrews, Paul S; Polack, Fiona A C; Veiga-Fernandes, Henrique; Coles, Mark C; Timmis, Jon

2015-03-06

The application of computational and mathematical modelling to explore the mechanics of biological systems is becoming prevalent. To significantly impact biological research, notably in developing novel therapeutics, it is critical that the model adequately represents the captured system. Confidence in adopting in silico approaches can be improved by applying a structured argumentation approach, alongside model development and results analysis. We propose an approach based on argumentation from safety-critical systems engineering, where a system is subjected to a stringent analysis of compliance against identified criteria. We show its use in examining the biological information upon which a model is based, identifying model strengths, highlighting areas requiring additional biological experimentation and providing documentation to support model publication. We demonstrate our use of structured argumentation in the development of a model of lymphoid tissue formation, specifically Peyer's Patches. The argumentation structure is captured using Artoo (www.york.ac.uk/ycil/software/artoo), our Web-based tool for constructing fitness-for-purpose arguments, using a notation based on the safety-critical goal structuring notation. We show how argumentation helps in making the design and structured analysis of a model transparent, capturing the reasoning behind the inclusion or exclusion of each biological feature and recording assumptions, as well as pointing to evidence supporting model-derived conclusions.

Critical Characteristics of Radiation Detection System Components to be Dedicated for use in Safety Class and Safety Significant System

DOE Office of Scientific and Technical Information (OSTI.GOV)

DAVIS, S.J.

2000-12-28

This document identifies critical characteristics of components to be dedicated for use in Safety Significant (SS) Systems, Structures, or Components (SSCs). This document identifies the requirements for the components of the common, radiation area, monitor alarm in the WESF pool cell. These are procured as Commercial Grade Items (CGI), with the qualification testing and formal dedication to be performed at the Waste Encapsulation Storage Facility (WESF) for use in safety significant systems. System modifications are to be performed in accordance with the approved design. Components for this change are commercially available and interchangeable with the existing alarm configuration This documentmore » focuses on the operational requirements for alarm, declaration of the safety classification, identification of critical characteristics, and interpretation of requirements for procurement. Critical characteristics are identified herein and must be verified, followed by formal dedication, prior to the components being used in safety related applications.« less

Agile Methods for Open Source Safety-Critical Software

PubMed Central

Enquobahrie, Andinet; Ibanez, Luis; Cheng, Patrick; Yaniv, Ziv; Cleary, Kevin; Kokoori, Shylaja; Muffih, Benjamin; Heidenreich, John

2011-01-01

The introduction of software technology in a life-dependent environment requires the development team to execute a process that ensures a high level of software reliability and correctness. Despite their popularity, agile methods are generally assumed to be inappropriate as a process family in these environments due to their lack of emphasis on documentation, traceability, and other formal techniques. Agile methods, notably Scrum, favor empirical process control, or small constant adjustments in a tight feedback loop. This paper challenges the assumption that agile methods are inappropriate for safety-critical software development. Agile methods are flexible enough to encourage the right amount of ceremony; therefore if safety-critical systems require greater emphasis on activities like formal specification and requirements management, then an agile process will include these as necessary activities. Furthermore, agile methods focus more on continuous process management and code-level quality than classic software engineering process models. We present our experiences on the image-guided surgical toolkit (IGSTK) project as a backdrop. IGSTK is an open source software project employing agile practices since 2004. We started with the assumption that a lighter process is better, focused on evolving code, and only adding process elements as the need arose. IGSTK has been adopted by teaching hospitals and research labs, and used for clinical trials. Agile methods have matured since the academic community suggested they are not suitable for safety-critical systems almost a decade ago, we present our experiences as a case study for renewing the discussion. PMID:21799545

An Approach for Validating Actinide and Fission Product Burnup Credit Criticality Safety Analyses--Criticality (keff) Predictions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scaglione, John M; Mueller, Don; Wagner, John C

2011-01-01

One of the most significant remaining challenges associated with expanded implementation of burnup credit in the United States is the validation of depletion and criticality calculations used in the safety evaluation - in particular, the availability and use of applicable measured data to support validation, especially for fission products. Applicants and regulatory reviewers have been constrained by both a scarcity of data and a lack of clear technical basis or approach for use of the data. U.S. Nuclear Regulatory Commission (NRC) staff have noted that the rationale for restricting their Interim Staff Guidance on burnup credit (ISG-8) to actinide-only ismore » based largely on the lack of clear, definitive experiments that can be used to estimate the bias and uncertainty for computational analyses associated with using burnup credit. To address the issue of validation, the NRC initiated a project with the Oak Ridge National Laboratory to (1) develop and establish a technically sound validation approach (both depletion and criticality) for commercial spent nuclear fuel (SNF) criticality safety evaluations based on best-available data and methods and (2) apply the approach for representative SNF storage and transport configurations/conditions to demonstrate its usage and applicability, as well as to provide reference bias results. The purpose of this paper is to describe the criticality (k{sub eff}) validation approach, and resulting observations and recommendations. Validation of the isotopic composition (depletion) calculations is addressed in a companion paper at this conference. For criticality validation, the approach is to utilize (1) available laboratory critical experiment (LCE) data from the International Handbook of Evaluated Criticality Safety Benchmark Experiments and the French Haut Taux de Combustion (HTC) program to support validation of the principal actinides and (2) calculated sensitivities, nuclear data uncertainties, and the limited available

An Approach for Validating Actinide and Fission Product Burnup Credit Criticality Safety Analyses: Criticality (k eff) Predictions

DOE PAGES

Scaglione, John M.; Mueller, Don E.; Wagner, John C.

2014-12-01

One of the most important remaining challenges associated with expanded implementation of burnup credit in the United States is the validation of depletion and criticality calculations used in the safety evaluation—in particular, the availability and use of applicable measured data to support validation, especially for fission products (FPs). Applicants and regulatory reviewers have been constrained by both a scarcity of data and a lack of clear technical basis or approach for use of the data. In this study, this paper describes a validation approach for commercial spent nuclear fuel (SNF) criticality safety (k eff) evaluations based on best-available data andmore » methods and applies the approach for representative SNF storage and transport configurations/conditions to demonstrate its usage and applicability, as well as to provide reference bias results. The criticality validation approach utilizes not only available laboratory critical experiment (LCE) data from the International Handbook of Evaluated Criticality Safety Benchmark Experiments and the French Haut Taux de Combustion program to support validation of the principal actinides but also calculated sensitivities, nuclear data uncertainties, and limited available FP LCE data to predict and verify individual biases for relevant minor actinides and FPs. The results demonstrate that (a) sufficient critical experiment data exist to adequately validate k eff calculations via conventional validation approaches for the primary actinides, (b) sensitivity-based critical experiment selection is more appropriate for generating accurate application model bias and uncertainty, and (c) calculated sensitivities and nuclear data uncertainties can be used for generating conservative estimates of bias for minor actinides and FPs. Results based on the SCALE 6.1 and the ENDF/B-VII.0 cross-section libraries indicate that a conservative estimate of the bias for the minor actinides and FPs is 1.5% of their worth within the

Safety cases for medical devices and health information technology: involving health-care organisations in the assurance of safety.

PubMed

Sujan, Mark A; Koornneef, Floor; Chozos, Nick; Pozzi, Simone; Kelly, Tim

2013-09-01

In the United Kingdom, there are more than 9000 reports of adverse events involving medical devices annually. The regulatory processes in Europe and in the United States have been challenged as to their ability to protect patients effectively from unreasonable risk and harm. Two of the major shortcomings of current practice include the lack of transparency in the safety certification process and the lack of involvement of service providers. We reviewed recent international standardisation activities in this area, and we reviewed regulatory practices in other safety-critical industries. The review showed that the use of safety cases is an accepted practice in UK safety-critical industries, but at present, there is little awareness of this concept in health care. Safety cases have the potential to provide greater transparency and confidence in safety certification and to act as a communication tool between manufacturers, service providers, regulators and patients.

Brazed Joints Design and Allowables: Discuss Margins of Safety in Critical Brazed Structures

NASA Technical Reports Server (NTRS)

FLom, Yury

2009-01-01

This slide presentation tutorial discusses margins of safety in critical brazed structures. It reviews: (1) the present situation (2) definition of strength (3) margins of safety (4) design allowables (5) mechanical testing (6) failure criteria (7) design flowchart (8) braze gap (9) residual stresses and (10) delayed failures. This presentation addresses the strength of the brazed joints, the methods of mechanical testing, and our ability to evaluate the margins of safety of the brazed joints as it applies to the design of critical and expensive brazed assemblies.

Bus operator safety : critical issues examination and model practices.

DOT National Transportation Integrated Search

2014-01-01

In this study, researchers at the National Center for Transit Research performed a multi-topic comprehensive : examination of bus operator-related critical safety and personal security issues. The goals of this research : effort were to: : 1. Identif...

Nuclear criticality safety evaluation of SRS 9971 shipping package

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vescovi, P.J.

1993-02-01

This evaluation is requested to revise the criticality evaluation used to generate Chapter 6 (Criticality Evaluation) of the Safety Analysis Report for Packaging (SARP) for shipment Of UO{sub 3} product from the Uranium Solidification Facility (USF) in the SRS 9971 shipping package. The pertinent document requesting this evaluation is included as Attachment I. The results of the evaluation are given in Attachment II which is written as Chapter 6 of a NRC format SARP.

76 FR 14641 - Defense Federal Acquisition Regulation Supplement; Identification of Critical Safety Items (DFARS...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-17

... Federal Acquisition Regulation Supplement; Identification of Critical Safety Items (DFARS Case 2010-D022... contract clause that clearly identifies any items being purchased that are critical safety items so that.... SUPPLEMENTARY INFORMATION: I. Background This DFARS case was initiated at the request of the Defense Contract...

European perspectives of food safety.

PubMed

Bánáti, Diána

2014-08-01

Food safety has been a growing concern among European Union (EU) citizens over the last decades. Despite the fact that food has never been safer, consumers are considerably uncertain and increasingly critical about the safety of their food. The introduction of new principles, such as the primary responsibility of producers, traceability, risk analysis, the separation of risk assessment and risk management provided a more transparent, science-based system in Europe, which can help to restore consumers' lost confidence. The present EU integrated approach to food safety 'from farm to fork' aims to assure a high level of food safety within the EU. © 2014 Society of Chemical Industry.

Security for safety critical space borne systems

NASA Technical Reports Server (NTRS)

Legrand, Sue

1987-01-01

The Space Station contains safety critical computer software components in systems that can affect life and vital property. These components require a multilevel secure system that provides dynamic access control of the data and processes involved. A study is under way to define requirements for a security model providing access control through level B3 of the Orange Book. The model will be prototyped at NASA-Johnson Space Center.

Medication safety infrastructure in critical-access hospitals in Florida.

PubMed

Winterstein, Almut G; Hartzema, Abraham G; Johns, Thomas E; De Leon, Jessica M; McDonald, Kathie; Henshaw, Zak; Pannell, Robert

2006-03-01

The medication safety infrastructure of critical-access hospitals (CAHs) in Florida was evaluated. Qualitative assessments, including a self-administered survey and site visits, were conducted in seven of nine CAHs between January and June 2003. The survey consisted of the Institute for Safe Medication Practices Medication Safety Self-assessment, the 2003 Joint Commission on Accreditation of Healthcare Organizations patient safety goals, health information technology (HIT) questions, and medication-use-process flow charts. On-site visits included interviews of CAH personnel who had safety responsibility and inspections of pharmacy facilities. The findings were compiled into a matrix reflecting structural and procedural components of the CAH medication safety infrastructure. The nine characteristics that emerged as targets for quality improvement (QI) were medication accessibility and storage, sterile product compounding, access to drug information, access to and utilization of patient information in medication order review, advanced safety technology, drug formularies and standardized medication protocols, safety culture, and medication reconciliation. Based on weighted importance and feasibility, QI efforts in CAHs should focus on enhancing medication order review systems, standardizing procedures for handling high-risk medications, promoting an appropriate safety culture, involvement in seamless care, and investment in HIT.

Collegiate Aviation Research and Education Solutions to Critical Safety Issues. UNO Aviation Monograph Series. UNOAI Report.

ERIC Educational Resources Information Center

Bowen, Brent, Ed.

This document contains four papers concerning collegiate aviation research and education solutions to critical safety issues. "Panel Proposal Titled Collegiate Aviation Research and Education Solutions to Critical Safety Issues for the Tim Forte Collegiate Aviation Safety Symposium" (Brent Bowen) presents proposals for panels on the…

College Students' Experiences with Diversity and Their Effects on Academic Self-Confidence, Social Agency, and Disposition toward Critical Thinking

ERIC Educational Resources Information Center

Laird, Thomas F. Nelson

2005-01-01

The results of this study conducted at the University of Michigan (n = 289) indicate that students with more experiences with diversity, particularly enrollment in diversity courses and positive interactions with diverse peers, are more likely to score higher on academic self-confidence, social agency, and critical thinking disposition. In…

Evolution of safety-critical requirements post-launch

NASA Technical Reports Server (NTRS)

Lutz, R. R.; Mikulski, I. C.

2001-01-01

This paper reports the results of a small study of requirements changes to the onboard software of three spacecraft subsequent to launch. Only those requirement changes that resulted from post-launch anoma-lies (i.e., during operations) were of interest here, since the goal was to better understand the relation-ship between critical anomalies during operations and how safety-critical requirements evolve. The results of the study were surprising in that anomaly-driven, post-launch requirements changes were rarely due to previous requirements having been incorrect. Instead, changes involved new requirements (1) for the software to handle rare events or (2) for the software to compensate for hardware failures or limitations. The prevalence of new requirements as a result of post-launch anomalies suggests a need for increased requirements-engineering support of maintenance activities in these systems. The results also confirm both the difficulty and the benefits of pursuing requirements completeness, especially in terms of fault tolerance, during development of critical systems.

Ending on a positive: Examining the role of safety leadership decisions, behaviours and actions in a safety critical situation.

PubMed

Donovan, Sarah-Louise; Salmon, Paul M; Horberry, Timothy; Lenné, Michael G

2018-01-01

Safety leadership is an important factor in supporting safe performance in the workplace. The present case study examined the role of safety leadership during the Bingham Canyon Mine high-wall failure, a significant mining incident in which no fatalities or injuries were incurred. The Critical Decision Method (CDM) was used in conjunction with a self-reporting approach to examine safety leadership in terms of decisions, behaviours and actions that contributed to the incidents' safe outcome. Mapping the analysis onto Rasmussen's Risk Management Framework (Rasmussen, 1997), the findings demonstrate clear links between safety leadership decisions, and emergent behaviours and actions across the work system. Communication and engagement based decisions featured most prominently, and were linked to different leadership practices across the work system. Further, a core sub-set of CDM decision elements were linked to the open flow and exchange of information across the work system, which was critical to supporting the safe outcome. The findings provide practical implications for the development of safety leadership capability to support safety within the mining industry. Copyright © 2017 Elsevier Ltd. All rights reserved.

GROWTH OF THE INTERNATIONAL CRITICALITY SAFETY AND REACTOR PHYSICS EXPERIMENT EVALUATION PROJECTS

DOE Office of Scientific and Technical Information (OSTI.GOV)

J. Blair Briggs; John D. Bess; Jim Gulliford

2011-09-01

Since the International Conference on Nuclear Criticality Safety (ICNC) 2007, the International Criticality Safety Benchmark Evaluation Project (ICSBEP) and the International Reactor Physics Experiment Evaluation Project (IRPhEP) have continued to expand their efforts and broaden their scope. Eighteen countries participated on the ICSBEP in 2007. Now, there are 20, with recent contributions from Sweden and Argentina. The IRPhEP has also expanded from eight contributing countries in 2007 to 16 in 2011. Since ICNC 2007, the contents of the 'International Handbook of Evaluated Criticality Safety Benchmark Experiments1' have increased from 442 evaluations (38000 pages), containing benchmark specifications for 3955 critical ormore » subcritical configurations to 516 evaluations (nearly 55000 pages), containing benchmark specifications for 4405 critical or subcritical configurations in the 2010 Edition of the ICSBEP Handbook. The contents of the Handbook have also increased from 21 to 24 criticality-alarm-placement/shielding configurations with multiple dose points for each, and from 20 to 200 configurations categorized as fundamental physics measurements relevant to criticality safety applications. Approximately 25 new evaluations and 150 additional configurations are expected to be added to the 2011 edition of the Handbook. Since ICNC 2007, the contents of the 'International Handbook of Evaluated Reactor Physics Benchmark Experiments2' have increased from 16 different experimental series that were performed at 12 different reactor facilities to 53 experimental series that were performed at 30 different reactor facilities in the 2011 edition of the Handbook. Considerable effort has also been made to improve the functionality of the searchable database, DICE (Database for the International Criticality Benchmark Evaluation Project) and verify the accuracy of the data contained therein. DICE will be discussed in separate papers at ICNC 2011. The status of the ICSBEP and

System Guidelines for EMC Safety-Critical Circuits: Design, Selection, and Margin Demonstration

NASA Technical Reports Server (NTRS)

Lawton, R. M.

1996-01-01

Demonstration of safety margins for critical points (circuits) has traditionally been required since it first became a part of systems-level Electromagnetic Compatibility (EMC) requirements of MIL-E-6051C. The goal of this document is to present cost-effective guidelines for ensuring adequate Electromagnetic Effects (EME) safety margins on spacecraft critical circuits. It is for the use of NASA and other government agencies and their contractors to prevent loss of life, loss of spacecraft, or unacceptable degradation. This document provides practical definition and treatment guidance to contain costs within affordable limits.

Activities of the DOE Nuclear Criticality Safety Program (NCSP) at the Oak Ridge Electron Linear Accelerator (ORELA)

NASA Astrophysics Data System (ADS)

Valentine, Timothy E.; Leal, Luiz C.; Guber, Klaus H.

2002-12-01

The Department of Energy established the Nuclear Criticality Safety Program (NCSP) in response to the Recommendation 97-2 by the Defense Nuclear Facilities Safety Board. The NCSP consists of seven elements of which nuclear data measurements and evaluations is a key component. The intent of the nuclear data activities is to provide high resolution nuclear data measurements that are evaluated, validated, and formatted for use by the nuclear criticality safety community to provide improved and reliable calculations for nuclear criticality safety evaluations. High resolution capture, fission, and transmission measurements are performed at the Oak Ridge Electron Linear Accelerator (ORELA) to address the needs of the criticality safety community and to address known deficiencies in nuclear data evaluations. The activities at ORELA include measurements on both light and heavy nuclei and have been used to identify improvements in measurement techniques that greatly improve the measurement of small capture cross sections. The measurement activities at ORELA provide precise and reliable high-resolution nuclear data for the nuclear criticality safety community.

10 CFR 72.124 - Criteria for nuclear criticality safety.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 2 2013-01-01 2013-01-01 false Criteria for nuclear criticality safety. 72.124 Section 72.124 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR THE INDEPENDENT STORAGE OF SPENT NUCLEAR FUEL, HIGH-LEVEL RADIOACTIVE WASTE, AND REACTOR-RELATED GREATER THAN CLASS C...

10 CFR 72.124 - Criteria for nuclear criticality safety.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 2 2014-01-01 2014-01-01 false Criteria for nuclear criticality safety. 72.124 Section 72.124 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR THE INDEPENDENT STORAGE OF SPENT NUCLEAR FUEL, HIGH-LEVEL RADIOACTIVE WASTE, AND REACTOR-RELATED GREATER THAN CLASS C...

10 CFR 72.124 - Criteria for nuclear criticality safety.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 2 2012-01-01 2012-01-01 false Criteria for nuclear criticality safety. 72.124 Section 72.124 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR THE INDEPENDENT STORAGE OF SPENT NUCLEAR FUEL, HIGH-LEVEL RADIOACTIVE WASTE, AND REACTOR-RELATED GREATER THAN CLASS C...

10 CFR 72.124 - Criteria for nuclear criticality safety.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 2 2011-01-01 2011-01-01 false Criteria for nuclear criticality safety. 72.124 Section 72.124 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR THE INDEPENDENT STORAGE OF SPENT NUCLEAR FUEL, HIGH-LEVEL RADIOACTIVE WASTE, AND REACTOR-RELATED GREATER THAN CLASS C...

10 CFR 72.124 - Criteria for nuclear criticality safety.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Criteria for nuclear criticality safety. 72.124 Section 72.124 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR THE INDEPENDENT STORAGE OF SPENT NUCLEAR FUEL, HIGH-LEVEL RADIOACTIVE WASTE, AND REACTOR-RELATED GREATER THAN CLASS C...

Criticality Safety Evaluation of Standard Criticality Safety Requirements #1-520 g Operations in PF-4

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yamanaka, Alan Joseph Jr.

Guidance has been requested from the Nuclear Criticality Safety Division (NCSD) regarding processes that involve 520 grams of fissionable material or less. This Level-3 evaluation was conducted and documented in accordance with NCS-AP-004 (Ref. 1), formerly NCS-GUIDE-01. This evaluation is being written as a generic evaluation for all operations that will be able to operate using a 520-gram mass limit. Implementation for specific operations will be performed using a Level 1 CSED, which will confirm and document that this CSED can be used for the specific operation as discussed in NCS-MEMO-17-007 (Ref. 2). This Level 3 CSED updates and supersedesmore » the analysis performed in NCS-TECH-14-014 (Ref. 3).« less

PRELIMINARY NUCLEAR CRITICALITY NUCLEAR SAFETY EVLAUATION FOR THE CONTAINER SURVEILLANCE AND STORAGE CAPABILITY PROJECT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Low, M; Matthew02 Miller, M; Thomas Reilly, T

2007-04-30

Washington Safety Management Solutions (WSMS) provides criticality safety services to Washington Savannah River Company (WSRC) at the Savannah River Site. One activity at SRS is the Container Surveillance and Storage Capability (CSSC) Project, which will perform surveillances on 3013 containers (hereafter referred to as 3013s) to verify that they meet the Department of Energy (DOE) Standard (STD) 3013 for plutonium storage. The project will handle quantities of material that are greater than ANS/ANSI-8.1 single parameter mass limits, and thus required a Nuclear Criticality Safety Evaluation (NCSE). The WSMS methodology for conducting an NCSE is outlined in the WSMS methods manual.more » The WSMS methods manual currently follows the requirements of DOE-O-420.1B, DOE-STD-3007-2007, and the Washington Savannah River Company (WSRC) SCD-3 manual. DOE-STD-3007-2007 describes how a NCSE should be performed, while DOE-O-420.1B outlines the requirements for a Criticality Safety Program (CSP). The WSRC SCD-3 manual implements DOE requirements and ANS standards. NCSEs do not address the Nuclear Criticality Safety (NCS) of non-reactor nuclear facilities that may be affected by overt or covert activities of sabotage, espionage, terrorism or other security malevolence. Events which are beyond the Design Basis Accidents (DBAs) are outside the scope of a double contingency analysis.« less

Risk perception, risk management and safety assessment: what can governments do to increase public confidence in their vaccine system?

PubMed

MacDonald, Noni E; Smith, Jennifer; Appleton, Mary

2012-09-01

For decades vaccine program managers and governments have devoted many resources to addressing public vaccine concerns, vaccine risk perception, risk management and safety assessment. Despite ever growing evidence that vaccines are safe and effective, public concerns continue. Education and evidence based scientific messages have not ended concerns. How can governments and programs more effectively address the public's vaccine concerns and increase confidence in the vaccine safety system? Vaccination hesitation has been attributed to concerns about vaccine safety, perceptions of high vaccine risks and low disease risk and consequences. Even when the public believes vaccines are important for protection many still have concerns about vaccine safety. This overview explores how heuristics affect public perception of vaccines and vaccine safety, how the public finds and uses vaccine information, and then proposes strategies for changes in the approach to vaccine safety communications. Facts and evidence confirming the safety of vaccines are not enough. Vaccine beliefs and behaviours must be shaped. This will require a shift in the what, when, how and why of vaccine risk and benefit communication content and practice. A change to a behavioural change strategy such as the WHO COMBI program that has been applied to disease eradication efforts is suggested. Copyright © 2011. Published by Elsevier Ltd.. All rights reserved.

Criticality Safety Evaluations on the Use of 200-gram Pu Mass Limit for RHWM Waste Storage Operations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chou, P

This work establishes the criticality safety technical basis to increase the fissile mass limit from 120 grams to 200 grams for Type A 55-gallon drums and their equivalents. Current RHWM fissile mass limit is 120 grams Pu for Type A 55-gallon containers and their equivalent. In order to increase the Type A 55-gallon drum limit to 200 grams, a few additional criticality safety control requirements are needed on moderators, reflectors, and array controls to ensure that the 200-gram Pu drums remain criticality safe with inadvertent criticality remains incredible. The purpose of this work is to analyze the use of 200-grammore » Pu drum mass limit for waste storage operations in Radioactive and Hazardous Waste Management (RHWM) Facilities. In this evaluation, the criticality safety controls associated with the 200-gram Pu drums are established for the RHWM waste storage operations. With the implementation of these criticality safety controls, the 200-gram Pu waste drum storage operations are demonstrated to be criticality safe and meet the double-contingency-principle requirement per DOE O 420.1.« less

Some Challenges in the Design of Human-Automation Interaction for Safety-Critical Systems

NASA Technical Reports Server (NTRS)

Feary, Michael S.; Roth, Emilie

2014-01-01

Increasing amounts of automation are being introduced to safety-critical domains. While the introduction of automation has led to an overall increase in reliability and improved safety, it has also introduced a class of failure modes, and new challenges in risk assessment for the new systems, particularly in the assessment of rare events resulting from complex inter-related factors. Designing successful human-automation systems is challenging, and the challenges go beyond good interface development (e.g., Roth, Malin, & Schreckenghost 1997; Christoffersen & Woods, 2002). Human-automation design is particularly challenging when the underlying automation technology generates behavior that is difficult for the user to anticipate or understand. These challenges have been recognized in several safety-critical domains, and have resulted in increased efforts to develop training, procedures, regulations and guidance material (CAST, 2008, IAEA, 2001, FAA, 2013, ICAO, 2012). This paper points to the continuing need for new methods to describe and characterize the operational environment within which new automation concepts are being presented. We will describe challenges to the successful development and evaluation of human-automation systems in safety-critical domains, and describe some approaches that could be used to address these challenges. We will draw from experience with the aviation, spaceflight and nuclear power domains.

Planning the Unplanned Experiment: Towards Assessing the Efficacy of Standards for Safety-Critical Software

NASA Technical Reports Server (NTRS)

Graydon, Patrick J.; Holloway, C. M.

2015-01-01

Safe use of software in safety-critical applications requires well-founded means of determining whether software is fit for such use. While software in industries such as aviation has a good safety record, little is known about whether standards for software in safety-critical applications 'work' (or even what that means). It is often (implicitly) argued that software is fit for safety-critical use because it conforms to an appropriate standard. Without knowing whether a standard works, such reliance is an experiment; without carefully collecting assessment data, that experiment is unplanned. To help plan the experiment, we organized a workshop to develop practical ideas for assessing software safety standards. In this paper, we relate and elaborate on the workshop discussion, which revealed subtle but important study design considerations and practical barriers to collecting appropriate historical data and recruiting appropriate experimental subjects. We discuss assessing standards as written and as applied, several candidate definitions for what it means for a standard to 'work,' and key assessment strategies and study techniques and the pros and cons of each. Finally, we conclude with thoughts about the kinds of research that will be required and how academia, industry, and regulators might collaborate to overcome the noted barriers.

A Practical Risk Assessment Methodology for Safety-Critical Train Control Systems

DOT National Transportation Integrated Search

2009-07-01

This project proposes a Practical Risk Assessment Methodology (PRAM) for analyzing railroad accident data and assessing the risk and benefit of safety-critical train control systems. This report documents in simple steps the algorithms and data input...

An aspect-oriented approach for designing safety-critical systems

NASA Astrophysics Data System (ADS)

Petrov, Z.; Zaykov, P. G.; Cardoso, J. P.; Coutinho, J. G. F.; Diniz, P. C.; Luk, W.

The development of avionics systems is typically a tedious and cumbersome process. In addition to the required functions, developers must consider various and often conflicting non-functional requirements such as safety, performance, and energy efficiency. Certainly, an integrated approach with a seamless design flow that is capable of requirements modelling and supporting refinement down to an actual implementation in a traceable way, may lead to a significant acceleration of development cycles. This paper presents an aspect-oriented approach supported by a tool chain that deals with functional and non-functional requirements in an integrated manner. It also discusses how the approach can be applied to development of safety-critical systems and provides experimental results.

75 FR 8239 - School Food Safety Program Based on Hazard Analysis and Critical Control Point Principles (HACCP...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-24

... 0584-AD65 School Food Safety Program Based on Hazard Analysis and Critical Control Point Principles... Safety Program Based on Hazard Analysis and Critical Control Point Principles (HACCP) was published on... of Management and Budget (OMB) cleared the associated information collection requirements (ICR) on...

Structural empowerment and patient safety culture among registered nurses working in adult critical care units.

PubMed

Armellino, Donna; Quinn Griffin, Mary T; Fitzpatrick, Joyce J

2010-10-01

The aim of the present study was to examine the relationship between structural empowerment and patient safety culture among staff level Registered Nurses (RNs) within adult critical care units (ACCU). There is literature to support the value of RNs' structurally empowered work environments and emerging literature towards patient safety culture; the link between empowerment and patient safety culture is being discovered. A sample of 257 RNs, working within adult critical care of a tertiary hospital in the United States, was surveyed. Instruments included a background data sheet, the Conditions of Workplace Effectiveness and the Hospital Survey on Patient Safety Culture. Structural empowerment and patient safety culture were significantly correlated. As structural empowerment increased so did the RNs' perception of patient safety culture. To foster patient safety culture, nurse leaders should consider providing structurally empowering work environments for RNs. This study contributes to the body of knowledge linking structural empowerment and patient safety culture. Results link structurally empowered RNs and increased patient safety culture, essential elements in delivering efficient, competent, quality care. They inform nursing management of key factors in the nurses' environment that promote safe patient care environments. © 2010 The Authors. Journal compilation © 2010 Blackwell Publishing Ltd.

Concept analysis: confidence/self-confidence.

PubMed

Perry, Patricia

2011-01-01

Confidence and self-confidence are crucial practice elements in nursing education and practice. Nurse educators should have an understanding of the concept of confidence in order to assist in the accomplishment of nursing students and their learning of technical and nontechnical skills. With the aim of facilitating trusted care of patients in the healthcare setting, nursing professionals must exhibit confidence, and, as such, clarification and analysis of its meaning is necessary. The purpose of this analysis is to provide clarity to the meaning of the concept confidence/self-confidence, while gaining a more comprehensive understanding of its attributes, antecedents, and consequences. Walker and Avant's eight-step method of concept analysis was utilized for the framework of the analysis process with model, contrary, borderline, and related cases presented along with attributes, antecedents, consequences, and empirical referents identified. Understanding both the individualized development of confidence among prelicensure nursing students and the role of the nurse educator in the development of confident nursing practice, nurse educators can assist students in the development of confidence and competency. Future research surrounding the nature and development of confidence/self-confidence in the prelicensure nursing student experiencing human patient simulation sessions would assist to help educators further promote the development of confidence. © 2011 Wiley Periodicals, Inc.

Shielding calculation and criticality safety analysis of spent fuel transportation cask in research reactors.

PubMed

Mohammadi, A; Hassanzadeh, M; Gharib, M

2016-02-01

In this study, shielding calculation and criticality safety analysis were carried out for general material testing reactor (MTR) research reactors interim storage and relevant transportation cask. During these processes, three major terms were considered: source term, shielding, and criticality calculations. The Monte Carlo transport code MCNP5 was used for shielding calculation and criticality safety analysis and ORIGEN2.1 code for source term calculation. According to the results obtained, a cylindrical cask with body, top, and bottom thicknesses of 18, 13, and 13 cm, respectively, was accepted as the dual-purpose cask. Furthermore, it is shown that the total dose rates are below the normal transport criteria that meet the standards specified. Copyright © 2015 Elsevier Ltd. All rights reserved.

A Poisson process approximation for generalized K-5 confidence regions

NASA Technical Reports Server (NTRS)

Arsham, H.; Miller, D. R.

1982-01-01

One-sided confidence regions for continuous cumulative distribution functions are constructed using empirical cumulative distribution functions and the generalized Kolmogorov-Smirnov distance. The band width of such regions becomes narrower in the right or left tail of the distribution. To avoid tedious computation of confidence levels and critical values, an approximation based on the Poisson process is introduced. This aproximation provides a conservative confidence region; moreover, the approximation error decreases monotonically to 0 as sample size increases. Critical values necessary for implementation are given. Applications are made to the areas of risk analysis, investment modeling, reliability assessment, and analysis of fault tolerant systems.

Sustaining Vaccine Confidence in the 21st Century

PubMed Central

Hardt, Karin; Schmidt-Ott, Ruprecht; Glismann, Steffen; Adegbola, Richard A.; Meurice, François P.

2013-01-01

Vaccination provides many health and economic benefits to individuals and society, and public support for immunization programs is generally high. However, the benefits of vaccines are often not fully valued when public discussions on vaccine safety, quality or efficacy arise, and the spread of misinformation via the internet and other media has the potential to undermine immunization programs. Factors associated with improved public confidence in vaccines include evidence-based decision-making procedures and recommendations, controlled processes for licensing and monitoring vaccine safety and effectiveness and disease surveillance. Community engagement with appropriate communication approaches for each audience is a key factor in building trust in vaccines. Vaccine safety/quality issues should be handled rapidly and transparently by informing and involving those most affected and those concerned with public health in effective ways. Openness and transparency in the exchange of information between industry and other stakeholders is also important. To maximize the safety of vaccines, and thus sustain trust in vaccines, partnerships are needed between public health sector stakeholders. Vaccine confidence can be improved through collaborations that ensure high vaccine uptake rates and that inform the public and other stakeholders of the benefits of vaccines and how vaccine safety is constantly assessed, assured and communicated. PMID:26344109

Approach for validating actinide and fission product compositions for burnup credit criticality safety analyses

DOE PAGES

Radulescu, Georgeta; Gauld, Ian C.; Ilas, Germina; ...

2014-11-01

This paper describes a depletion code validation approach for criticality safety analysis using burnup credit for actinide and fission product nuclides in spent nuclear fuel (SNF) compositions. The technical basis for determining the uncertainties in the calculated nuclide concentrations is comparison of calculations to available measurements obtained from destructive radiochemical assay of SNF samples. Probability distributions developed for the uncertainties in the calculated nuclide concentrations were applied to the SNF compositions of a criticality safety analysis model by the use of a Monte Carlo uncertainty sampling method to determine bias and bias uncertainty in effective neutron multiplication factor. Application ofmore » the Monte Carlo uncertainty sampling approach is demonstrated for representative criticality safety analysis models of pressurized water reactor spent fuel pool storage racks and transportation packages using burnup-dependent nuclide concentrations calculated with SCALE 6.1 and the ENDF/B-VII nuclear data. Furthermore, the validation approach and results support a recent revision of the U.S. Nuclear Regulatory Commission Interim Staff Guidance 8.« less

Educating Next Generation Nuclear Criticality Safety Engineers at the Idaho National Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

J. D. Bess; J. B. Briggs; A. S. Garcia

2011-09-01

One of the challenges in educating our next generation of nuclear safety engineers is the limitation of opportunities to receive significant experience or hands-on training prior to graduation. Such training is generally restricted to on-the-job-training before this new engineering workforce can adequately provide assessment of nuclear systems and establish safety guidelines. Participation in the International Criticality Safety Benchmark Evaluation Project (ICSBEP) and the International Reactor Physics Experiment Evaluation Project (IRPhEP) can provide students and young professionals the opportunity to gain experience and enhance critical engineering skills. The ICSBEP and IRPhEP publish annual handbooks that contain evaluations of experiments along withmore » summarized experimental data and peer-reviewed benchmark specifications to support the validation of neutronics codes, nuclear cross-section data, and the validation of reactor designs. Participation in the benchmark process not only benefits those who use these Handbooks within the international community, but provides the individual with opportunities for professional development, networking with an international community of experts, and valuable experience to be used in future employment. Traditionally students have participated in benchmarking activities via internships at national laboratories, universities, or companies involved with the ICSBEP and IRPhEP programs. Additional programs have been developed to facilitate the nuclear education of students while participating in the benchmark projects. These programs include coordination with the Center for Space Nuclear Research (CSNR) Next Degree Program, the Collaboration with the Department of Energy Idaho Operations Office to train nuclear and criticality safety engineers, and student evaluations as the basis for their Master's thesis in nuclear engineering.« less

Confirming criticality safety of TRU waste with neutron measurements and risk analyses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Winn, W.G.; Hochel, R.D.

1992-04-01

The criticality safety of {sup 239}Pu in 55-gallon drums stored in TRU waste containers (culverts) is confirmed using NDA neutron measurements and risk analyses. The neutron measurements yield a {sup 239}Pu mass and k{sub eff} for a culvert, which contains up to 14 drums. Conservative probabilistic risk analyses were developed for both drums and culverts. Overall {sup 239}Pu mass estimates are less than a calculated safety limit of 2800 g per culvert. The largest measured k{sub eff} is 0.904. The largest probability for a critical drum is 6.9 {times} 10{sup {minus}8} and that for a culvert is 1.72 {times} 10{supmore » {minus}7}. All examined suspect culverts, totaling 118 in number, are appraised as safe based on these observations.« less

The effect of terrorism on public confidence : an exploratory study.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berry, M. S.; Baldwin, T. E.; Samsa, M. E.

A primary goal of terrorism is to instill a sense of fear and vulnerability in a population and to erode confidence in government and law enforcement agencies to protect citizens against future attacks. In recognition of its importance, the Department of Homeland Security includes public confidence as one of the metrics it uses to assess the consequences of terrorist attacks. Hence, several factors--including a detailed understanding of the variations in public confidence among individuals, by type of terrorist event, and as a function of time--are critical to developing this metric. In this exploratory study, a questionnaire was designed, tested, andmore » administered to small groups of individuals to measure public confidence in the ability of federal, state, and local governments and their public safety agencies to prevent acts of terrorism. Data were collected from the groups before and after they watched mock television news broadcasts portraying a smallpox attack, a series of suicide bomber attacks, a refinery bombing, and cyber intrusions on financial institutions that resulted in identity theft and financial losses. Our findings include the following: (a) the subjects can be classified into at least three distinct groups on the basis of their baseline outlook--optimistic, pessimistic, and unaffected; (b) the subjects make discriminations in their interpretations of an event on the basis of the nature of a terrorist attack, the time horizon, and its impact; (c) the recovery of confidence after a terrorist event has an incubation period and typically does not return to its initial level in the long-term; (d) the patterns of recovery of confidence differ between the optimists and the pessimists; and (e) individuals are able to associate a monetary value with a loss or gain in confidence, and the value associated with a loss is greater than the value associated with a gain. These findings illustrate the importance the public places in their confidence in

[Biomedical research, the market, clinicians, safety and corporate social responsibility post-phase III: maintaining confidence].

PubMed

Marín-Gámez, N; Kessel-Sardiñas, H; Cervantes-Bonet, B; López-Palmero, S; Antón-Molina, F; Martínez-García, L

2010-01-01

- undoubtedly less costly and more rapid - without adequately knowing the safety of the strategy built to reach them. Only in this way we can be real guarantors of safety, and only in this way, and in absence of conflicts of interests we will be able to support the given confidence.

Is Model-Based Development a Favorable Approach for Complex and Safety-Critical Computer Systems on Commercial Aircraft?

NASA Technical Reports Server (NTRS)

Torres-Pomales, Wilfredo

2014-01-01

A system is safety-critical if its failure can endanger human life or cause significant damage to property or the environment. State-of-the-art computer systems on commercial aircraft are highly complex, software-intensive, functionally integrated, and network-centric systems of systems. Ensuring that such systems are safe and comply with existing safety regulations is costly and time-consuming as the level of rigor in the development process, especially the validation and verification activities, is determined by considerations of system complexity and safety criticality. A significant degree of care and deep insight into the operational principles of these systems is required to ensure adequate coverage of all design implications relevant to system safety. Model-based development methodologies, methods, tools, and techniques facilitate collaboration and enable the use of common design artifacts among groups dealing with different aspects of the development of a system. This paper examines the application of model-based development to complex and safety-critical aircraft computer systems. Benefits and detriments are identified and an overall assessment of the approach is given.

Feasibility and safety of virtual-reality-based early neurocognitive stimulation in critically ill patients.

PubMed

Turon, Marc; Fernandez-Gonzalo, Sol; Jodar, Mercè; Gomà, Gemma; Montanya, Jaume; Hernando, David; Bailón, Raquel; de Haro, Candelaria; Gomez-Simon, Victor; Lopez-Aguilar, Josefina; Magrans, Rudys; Martinez-Perez, Melcior; Oliva, Joan Carles; Blanch, Lluís

2017-12-01

Growing evidence suggests that critical illness often results in significant long-term neurocognitive impairments in one-third of survivors. Although these neurocognitive impairments are long-lasting and devastating for survivors, rehabilitation rarely occurs during or after critical illness. Our aim is to describe an early neurocognitive stimulation intervention based on virtual reality for patients who are critically ill and to present the results of a proof-of-concept study testing the feasibility, safety, and suitability of this intervention. Twenty critically ill adult patients undergoing or having undergone mechanical ventilation for ≥24 h received daily 20-min neurocognitive stimulation sessions when awake and alert during their ICU stay. The difficulty of the exercises included in the sessions progressively increased over successive sessions. Physiological data were recorded before, during, and after each session. Safety was assessed through heart rate, peripheral oxygen saturation, and respiratory rate. Heart rate variability analysis, an indirect measure of autonomic activity sensitive to cognitive demands, was used to assess the efficacy of the exercises in stimulating attention and working memory. Patients successfully completed the sessions on most days. No sessions were stopped early for safety concerns, and no adverse events occurred. Heart rate variability analysis showed that the exercises stimulated attention and working memory. Critically ill patients considered the sessions enjoyable and relaxing without being overly fatiguing. The results in this proof-of-concept study suggest that a virtual-reality-based neurocognitive intervention is feasible, safe, and tolerable, stimulating cognitive functions and satisfying critically ill patients. Future studies will evaluate the impact of interventions on neurocognitive outcomes. Trial registration Clinical trials.gov identifier: NCT02078206.

System Guidelines for EMC Safety-Critical Circuits: Design, Selection, and Margin Demonstration

NASA Technical Reports Server (NTRS)

Lawton, R. M.

1996-01-01

Demonstration of required safety margins on critical electrical/electronic circuits in large complex systems has become an implementation and cost problem. These margins are the difference between the activation level of the circuit and the electrical noise on the circuit in the actual operating environment. This document discusses the origin of the requirement and gives a detailed process flow for the identification of the system electromagnetic compatibility (EMC) critical circuit list. The process flow discusses the roles of engineering disciplines such as systems engineering, safety, and EMC. Design and analysis guidelines are provided to assist the designer in assuring the system design has a high probability of meeting the margin requirements. Examples of approaches used on actual programs (Skylab and Space Shuttle Solid Rocket Booster) are provided to show how variations of the approach can be used successfully.

Critical factors and paths influencing construction workers' safety risk tolerances.

PubMed

Wang, Jiayuan; Zou, Patrick X W; Li, Penny P

2016-08-01

While workers' safety risk tolerances have been regarded as a main reason for their unsafe behaviors, little is known about why different people have different risk tolerances even when confronting the same situation. The aim of this research is to identify the critical factors and paths that influence workers' safety risk tolerance and to explore how they contribute to accident causal model from a system thinking perceptive. A number of methods were carried out to analyze the data collected through interviews and questionnaire surveys. In the first and second steps of the research, factor identification, factor ranking and factor analysis were carried out, and the results show that workers' safety risk tolerance can be influenced by four groups of factors, namely: (1) personal subjective perception; (2) work knowledge and experiences; (3) work characteristics; and (4) safety management. In the third step of the research, hypothetical influencing path model was developed and tested by using structural equation modeling (SEM). It is found that the effects of external factors (safety management and work characteristics) on risk tolerance are larger than that of internal factors (personal subjective perception and work knowledge & experiences). Specifically, safety management contributes the most to workers' safety risk tolerance through its direct effect and indirect effect; while personal subjective perception comes the second and can act as an intermedia for work characteristics. This research provides an in-depth insight of workers' unsafe behaviors by depicting the contributing factors as shown in the accident causal model developed in this research. Copyright © 2015 Elsevier Ltd. All rights reserved.

RICIS Symposium 1992: Mission and Safety Critical Systems Research and Applications

NASA Technical Reports Server (NTRS)

1992-01-01

This conference deals with computer systems which control systems whose failure to operate correctly could produce the loss of life and or property, mission and safety critical systems. Topics covered are: the work of standards groups, computer systems design and architecture, software reliability, process control systems, knowledge based expert systems, and computer and telecommunication protocols.

CSER 98-003: Criticality safety evaluation report for PFP glovebox HC-21A with button can opening

DOE Office of Scientific and Technical Information (OSTI.GOV)

ERICKSON, D.G.

1999-02-23

Glovebox HC-21A is an enclosure where cans containing plutonium metal buttons or other plutonium bearing materials are prepared for thermal stabilization in the muffle furnaces. The Inert Atmosphere Confinement (IAC), a new feature added to Glovebox HC-21A, allows the opening of containers suspected of containing hydrided plutonium metal. The argon atmosphere in the IAC prevents an adverse reaction between oxygen and the hydride. The hydride is then stabilized in a controlled manner to prevent glovebox over pressurization. After removal from the containers, the plutonium metal buttons or plutonium bearing materials will be placed into muffle furnace boats and then bemore » sent to one of the muffle furnace gloveboxes for stabilization. The materials allowed to be brought into GloveboxHC-21 A are limited to those with a hydrogen to fissile atom ratio (H/X) {le} 20. Glovebox HC-21A is classified as a DRY glovebox, meaning it has no internal liquid lines, and no free liquids or solutions are allowed to be introduced. The double contingency principle states that designs shall incorporate sufficient factors of safety to require at least two unlikely, independent, and concurrent changes in process conditions before a criticality accident is possible. This criticality safety evaluation report (CSER) shows that the operations to be performed in this glovebox are safe from a criticality standpoint. No single identified event that causes criticality controls to be lost exceeded the criticality safety limit of k{sub eff} = 0.95. Therefore, this CSER meets the requirements for a criticality analysis contained in the Hanford Site Nuclear Criticality Safety Manual, HNF-PRO-334, and meets the double contingency principle.« less

Testing of Safety-Critical Software Embedded in an Artificial Heart

NASA Astrophysics Data System (ADS)

Cha, Sungdeok; Jeong, Sehun; Yoo, Junbeom; Kim, Young-Gab

Software is being used more frequently to control medical devices such as artificial heart or robotic surgery system. While much of software safety issues in such systems are similar to other safety-critical systems (e.g., nuclear power plants), domain-specific properties may warrant development of customized techniques to demonstrate fitness of the system on patients. In this paper, we report results of a preliminary analysis done on software controlling a Hybrid Ventricular Assist Device (H-VAD) developed by Korea Artificial Organ Centre (KAOC). It is a state-of-the-art artificial heart which completed animal testing phase. We performed software testing in in-vitro experiments and animal experiments. An abnormal behaviour, never detected during extensive in-vitro analysis and animal testing, was found.

Four Pillars for Improving the Quality of Safety-Critical Software-Reliant Systems

DTIC Science & Technology

2013-04-01

Studies of safety-critical software-reliant systems developed using the current practices of build-then-test show that requirements and architecture ... design defects make up approximately 70% of all defects, many system level related to operational quality attributes, and 80% of these defects are

Criticality safety strategy for the Fuel Cycle Facility electrorefiner at Argonne National Laboratory, West

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mariani, R.D.; Benedict, R.W.; Lell, R.M.

1993-09-01

The Integral Fast Reactor being developed by Argonne National Laboratory (ANL) combines the advantages of metal-fueled, liquid-metal-cooled reactors and a closed fuel cycle. Presently, the Fuel Cycle Facility (FCF) at ANL-West in Idaho Falls, Idaho is being modified to recycle spent metallic fuel from Experimental Breeder Reactor II as part of a demonstration project sponsored by the Department of Energy. A key component of the FCF is the electrorefiner (ER) in which the actinides are separated from the fission products. In the electrorefining process, the metal fuel is anodically dissolved into a high-temperature molten salt and refined uranium or uranium/plutoniummore » products are deposited at cathodes. In this report, the criticality safety strategy for the FCF ER is summarized. FCF ER operations and processes formed the basis for evaluating criticality safety and control during actinide metal fuel refining. In order to show criticality safety for the FCF ER, the reference operating conditions for the ER had to be defined. Normal operating envelopes (NOES) were then defined to bracket the important operating conditions. To keep the operating conditions within their NOES, process controls were identified that can be used to regulate the actinide forms and content within the ER. A series of operational checks were developed for each operation that wig verify the extent or success of an operation. The criticality analysis considered the ER operating conditions at their NOE values as the point of departure for credible and incredible failure modes. As a result of the analysis, FCF ER operations were found to be safe with respect to criticality.« less

Verification of MCNP6.2 for Nuclear Criticality Safety Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, Forrest B.; Rising, Michael Evan; Alwin, Jennifer Louise

2017-05-10

Several suites of verification/validation benchmark problems were run in early 2017 to verify that the new production release of MCNP6.2 performs correctly for nuclear criticality safety applications (NCS). MCNP6.2 results for several NCS validation suites were compared to the results from MCNP6.1 [1] and MCNP6.1.1 [2]. MCNP6.1 is the production version of MCNP® released in 2013, and MCNP6.1.1 is the update released in 2014. MCNP6.2 includes all of the standard features for NCS calculations that have been available for the past 15 years, along with new features for sensitivity-uncertainty based methods for NCS validation [3]. Results from the benchmark suitesmore » were compared with results from previous verification testing [4-8]. Criticality safety analysts should consider testing MCNP6.2 on their particular problems and validation suites. No further development of MCNP5 is planned. MCNP6.1 is now 4 years old, and MCNP6.1.1 is now 3 years old. In general, released versions of MCNP are supported only for about 5 years, due to resource limitations. All future MCNP improvements, bug fixes, user support, and new capabilities are targeted only to MCNP6.2 and beyond.« less

Nuclear criticality safety evaluation of SRS 9971 shipping package. [SRS (Savannah River Site)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vescovi, P.J.

1993-02-01

This evaluation is requested to revise the criticality evaluation used to generate Chapter 6 (Criticality Evaluation) of the Safety Analysis Report for Packaging (SARP) for shipment Of UO[sub 3] product from the Uranium Solidification Facility (USF) in the SRS 9971 shipping package. The pertinent document requesting this evaluation is included as Attachment I. The results of the evaluation are given in Attachment II which is written as Chapter 6 of a NRC format SARP.

Nuclear criticality safety assessment of the low level radioactive waste disposal facility trenches

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kahook, S.D.

1994-04-01

Results of the analyses performed to evaluate the possibility of nuclear criticality in the Low Level Radioactive Waste Disposal Facility (LLRWDF) trenches are documented in this report. The studies presented in this document are limited to assessment of the possibility of criticality due to existing conditions in the LLRWDF. This document does not propose nor set limits for enriched uranium (EU) burial in the LLRWDF and is not a nuclear criticality safety evaluation nor analysis. The calculations presented in the report are Level 2 calculations as defined by the E7 Procedure 2.31, Engineering Calculations.

Assuring NASA's Safety and Mission Critical Software

NASA Technical Reports Server (NTRS)

Deadrick, Wesley

2015-01-01

What is IV&V? Independent Verification and Validation (IV&V) is an objective examination of safety and mission critical software processes and products. Independence: 3 Key parameters: Technical Independence; Managerial Independence; Financial Independence. NASA IV&V perspectives: Will the system's software: Do what it is supposed to do?; Not do what it is not supposed to do?; Respond as expected under adverse conditions?. Systems Engineering: Determines if the right system has been built and that it has been built correctly. IV&V Technical Approaches: Aligned with IEEE 1012; Captured in a Catalog of Methods; Spans the full project lifecycle. IV&V Assurance Strategy: The IV&V Project's strategy for providing mission assurance; Assurance Strategy is driven by the specific needs of an individual project; Implemented via an Assurance Design; Communicated via Assurance Statements.

Comparison of dietary supplement product knowledge and confidence between pharmacists and health food store employees.

PubMed

Coon, Scott A; Stevens, Vanessa W; Brown, Jack E; Wolff, Stephen E; Wrobel, Mark J

2015-01-01

To determine pharmacists' and health food store employees' knowledge about the safety and efficacy of common, nonvitamin, nonmineral dietary supplements in a retail setting and confidence in discussing, recommending, and acquiring knowledge about complementary and alternative medicine (CAM). Cross-sectional survey. Central and western New York in May and June 2012. Knowledge and confidence survey scores based on true/false and Likert scale responses. Pharmacists' mean knowledge score was significantly higher than that of health food store employees (8.42 vs. 6.15 items of 15 total knowledge questions). Adjusting for differences in experience, education, occupation, and confidence, knowledge scores were significantly higher for pharmacists and those with a higher total confidence score. Pharmacists were significantly less confident about the safety and efficacy of CAM comparatively (13 vs. 16 items of 20 total questions). Pharmacists scored significantly higher than health food store employees on a survey assessing knowledge of dietary supplements' safety and efficacy. Despite the significant difference, scores were unacceptably low for pharmacists, highlighting a knowledge deficit in subject matter.

Definition and means of maintaining the criticality detectors and alarms portion of the PFP safety envelope

DOE Office of Scientific and Technical Information (OSTI.GOV)

White, W.F.

The purpose of this document is to provide the definition and means of maintaining the Safety Envelope (SE) related to the Criticality Alarm System (CAS). This document provides amplification of the Limiting Condition for Operation (LCO) described in the Plutonium Finishing Plant (PFP) Operational Safety Requirements (OSR), WHC-SD-CP-OSR-010, Rev. 0, 1994, Section 3.1.2, Criticality Detectors and Alarms. This document, with its appendices, provides the following: (1) System functional requirements for determining system operability (Section 3); (2) A list of annotated system block diagrams which indicate the safety envelope boundaries (Appendix C); (3) A list of the Safety Class 1 andmore » 2 Safety Envelope (SC-1/2 SE) equipment for input into the Master Component Index (Appendix B); (4) Functional requirements for individual SC-1/2 SE components, including appropriate setpoints and process parameters (Section 6 and Appendix A); (5) A list of the operational, maintenance and surveillance procedures necessary to operate and maintain the SC-1/2 SE components as required by the LCO (Section 6 and Appendix A).« less

Validation of Safety-Critical Systems for Aircraft Loss-of-Control Prevention and Recovery

NASA Technical Reports Server (NTRS)

Belcastro, Christine M.

2012-01-01

Validation of technologies developed for loss of control (LOC) prevention and recovery poses significant challenges. Aircraft LOC can result from a wide spectrum of hazards, often occurring in combination, which cannot be fully replicated during evaluation. Technologies developed for LOC prevention and recovery must therefore be effective under a wide variety of hazardous and uncertain conditions, and the validation framework must provide some measure of assurance that the new vehicle safety technologies do no harm (i.e., that they themselves do not introduce new safety risks). This paper summarizes a proposed validation framework for safety-critical systems, provides an overview of validation methods and tools developed by NASA to date within the Vehicle Systems Safety Project, and develops a preliminary set of test scenarios for the validation of technologies for LOC prevention and recovery

Critical review of controlled release packaging to improve food safety and quality.

PubMed

Chen, Xi; Chen, Mo; Xu, Chenyi; Yam, Kit L

2018-03-19

Controlled release packaging (CRP) is an innovative technology that uses the package to release active compounds in a controlled manner to improve safety and quality for a wide range of food products during storage. This paper provides a critical review of the uniqueness, design considerations, and research gaps of CRP, with a focus on the kinetics and mechanism of active compounds releasing from the package. Literature data and practical examples are presented to illustrate how CRP controls what active compounds to release, when and how to release, how much and how fast to release, in order to improve food safety and quality.

An Integrated Understanding of Confidence and User Calibration in Information Systems Use

ERIC Educational Resources Information Center

Tang, Fengchun

2012-01-01

Dealing with uncertainty is a critical part of human decision-making and confidence reflects one's belief about the relative likelihood that various outcomes occur when making decision under uncertainty. Unfortunately, confidence often deviates from the actual quality of the decision, leading to under- or over-confidence. Calibration, the…

Confidence in Altman-Bland plots: a critical review of the method of differences.

PubMed

Ludbrook, John

2010-02-01

1. Altman and Bland argue that the virtue of plotting differences against averages in method-comparison studies is that 95% confidence limits for the differences can be constructed. These allow authors and readers to judge whether one method of measurement could be substituted for another. 2. The technique is often misused. So I have set out, by statistical argument and worked examples, to advise pharmacologists and physiologists how best to construct these limits. 3. First, construct a scattergram of differences on averages, then calculate the line of best fit for the linear regression of differences on averages. If the slope of the regression is shown to differ from zero, there is proportional bias. 4. If there is no proportional bias and if the scatter of differences is uniform (homoscedasticity), construct 'classical' 95% confidence limits. 5. If there is proportional bias yet homoscedasticity, construct hyperbolic 95% confidence limits (prediction interval) around the line of best fit. 6. If there is proportional bias and the scatter of values for differences increases progressively as the average values increase (heteroscedasticity), log-transform the raw values from the two methods and replot differences against averages. If this eliminates proportional bias and heteroscedasticity, construct 'classical' 95% confidence limits. Otherwise, construct horizontal V-shaped 95% confidence limits around the line of best fit of differences on averages or around the weighted least products line of best fit to the original data. 7. In designing a method-comparison study, consult a qualified biostatistician, obey the rules of randomization and make replicate observations.

Automated Transfer Vehicle (ATV) Critical Safety Software Overview

NASA Astrophysics Data System (ADS)

Berthelier, D.

2002-01-01

The European Automated Transfer Vehicle is an unmanned transportation system designed to dock to International Space Station (ISS) and to contribute to the logistic servicing of the ISS. Concisely, ATV control is realized by a nominal flight control function (using computers, softwares, sensors, actuators). In order to cover the extreme situations where this nominal chain can not ensure safe trajectory with respect to ISS, a segregated proximity flight safety function is activated, where unsafe free drift trajectories can be encountered. This function relies notably on a segregated computer, the Monitoring and Safing Unit (MSU) ; in case of major ATV malfunction detection, ATV is then controlled by MSU software. Therefore, this software is critical because a MSU software failure could result in catastrophic consequences. This paper provides an overview both of this software functions and of the software development and validation method which is specific considering its criticality. First part of the paper describes briefly the proximity flight safety chain. Second part deals with the software functions. Indeed, MSU software is in charge of monitoring nominal computers and ATV corridors, using its own navigation algorithms, and, if an abnormal situation is detected, it is in charge of the ATV control during the Collision Avoidance Manoeuvre (CAM) consisting in an attitude controlled braking boost, followed by a Post-CAM manoeuvre : a Sun-pointed ATV attitude control during up to 24 hours on a safe trajectory. Monitoring, navigation and control algorithms principles are presented. Third part of this paper describes the development and validation process : algorithms functional studies , ADA coding and unit validations ; algorithms ADA code integration and validation on a specific non real-time MATLAB/SIMULINK simulator ; global software functional engineering phase, architectural design, unit testing, integration and validation on target computer.

Packaging Strategies for Criticality Safety for "Other" DOE Fuels in a Repository

DOE Office of Scientific and Technical Information (OSTI.GOV)

Larry L Taylor

2004-06-01

Since 1998, there has been an ongoing effort to gain acceptance of U.S. Department of Energy (DOE)-owned spent nuclear fuel (SNF) in the national repository. To accomplish this goal, the fuel matrix was used as a discriminating feature to segregate fuels into nine distinct groups. From each of those groups, a characteristic fuel was selected and analyzed for criticality safety based on a proposed packaging strategy. This report identifies and quantifies the important criticality parameters for the canisterized fuels within each criticality group to: (1) demonstrate how the “other” fuels in the group are bounded by the baseline calculations ormore » (2) allow identification of individual type fuels that might require special analysis and packaging.« less

Using the Job Demands-Resources model to investigate risk perception, safety climate and job satisfaction in safety critical organizations.

PubMed

Nielsen, Morten Birkeland; Mearns, Kathryn; Matthiesen, Stig Berge; Eid, Jarle

2011-10-01

Using the Job Demands-Resources model (JD-R) as a theoretical framework, this study investigated the relationship between risk perception as a job demand and psychological safety climate as a job resource with regard to job satisfaction in safety critical organizations. In line with the JD-R model, it was hypothesized that high levels of risk perception is related to low job satisfaction and that a positive perception of safety climate is related to high job satisfaction. In addition, it was hypothesized that safety climate moderates the relationship between risk perception and job satisfaction. Using a sample of Norwegian offshore workers (N = 986), all three hypotheses were supported. In summary, workers who perceived high levels of risk reported lower levels of job satisfaction, whereas this effect diminished when workers perceived their safety climate as positive. Follow-up analyses revealed that this interaction was dependent on the type of risks in question. The results of this study supports the JD-R model, and provides further evidence for relationships between safety-related concepts and work-related outcomes indicating that organizations should not only develop and implement sound safety procedures to reduce the effects of risks and hazards on workers, but can also enhance other areas of organizational life through a focus on safety. © 2011 The Authors. Scandinavian Journal of Psychology © 2011 The Scandinavian Psychological Associations.

Safety and Feasibility of a Neuroscience Critical Care Program to Mobilize Patients With Primary Intracerebral Hemorrhage.

PubMed

Bahouth, Mona N; Power, Melinda C; Zink, Elizabeth K; Kozeniewski, Kate; Kumble, Sowmya; Deluzio, Sandra; Urrutia, Victor C; Stevens, Robert D

2018-06-01

To measure the impact of a progressive mobility program on patients admitted to a neurocritical critical care unit (NCCU) with intracerebral hemorrhage (ICH). The early mobilization of critically ill patients with spontaneous ICH is a challenge owing to the potential for neurologic deterioration and hemodynamic lability in the acute phase of injury. Patients admitted to the intensive care unit have been excluded from randomized trials of early mobilization after stroke. An interdisciplinary working group developed a formalized NCCU Mobility Algorithm that allocates patients to incremental passive or active mobilization pathways on the basis of level of consciousness and motor function. In a quasi-experimental consecutive group comparison, patients with ICH admitted to the NCCU were analyzed in two 6-month epochs, before and after rollout of the algorithm. Mobilization and safety endpoints were compared between epochs. NCCU in an urban, academic hospital. Adult patients admitted to the NCCU with primary intracerebral hemorrhage. Progressive mobilization after stroke using a formalized mobility algorithm. Time to first mobilization. The 2 groups of patients with ICH (pre-algorithm rolllout, n=28; post-algorithm rollout, n=29) were similar on baseline characteristics. Patients in the postintervention group were significantly more likely to undergo mobilization within the first 7 days after admission (odds ratio 8.7, 95% confidence interval 2.1, 36.6; P=.003). No neurologic deterioration, hypotension, falls, or line dislodgments were reported in association with mobilization. A nonsignificant difference in mortality was noted before and after rollout of the algorithm (4% vs 24%, respectively, P=.12). The implementation of a progressive mobility algorithm was safe and associated with a higher likelihood of mobilization in the first week after spontaneous ICH. Research is needed to investigate methods and the timing for the first mobilization in critically ill stroke

Instructional games and activities for criticality safety training

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bullard, B.; McBride, J.

1993-01-01

During the past several years, the Training and Management Systems Division (TMSD) staff of Oak Ridge Institute for Science and Education (ORISE) has designed and developed nuclear criticality safety (NCS) training programs that focus on high trainee involvement through the use of instructional games and activities. This paper discusses the instructional game, initial considerations for developing games, advantages and limitations of games, and how games may be used in developing and implementing NCS training. It also provides examples of the various instructional games and activities used in separate courses designed for Martin Marietta Energy Systems (MMES's) supervisors and U.S. Nuclearmore » Regulatory Commission (NRC) fuel facility inspectors.« less

Weighting Mean and Variability during Confidence Judgments

PubMed Central

de Gardelle, Vincent; Mamassian, Pascal

2015-01-01

Humans can not only perform some visual tasks with great precision, they can also judge how good they are in these tasks. However, it remains unclear how observers produce such metacognitive evaluations, and how these evaluations might be dissociated from the performance in the visual task. Here, we hypothesized that some stimulus variables could affect confidence judgments above and beyond their impact on performance. In a motion categorization task on moving dots, we manipulated the mean and the variance of the motion directions, to obtain a low-mean low-variance condition and a high-mean high-variance condition with matched performances. Critically, in terms of confidence, observers were not indifferent between these two conditions. Observers exhibited marked preferences, which were heterogeneous across individuals, but stable within each observer when assessed one week later. Thus, confidence and performance are dissociable and observers’ confidence judgments put different weights on the stimulus variables that limit performance. PMID:25793275

Increasing Product Confidence-Shifting Paradigms.

PubMed

Phillips, Marla; Kashyap, Vishal; Cheung, Mee-Shew

2015-01-01

with a newfound respect for their suppliers, and it will allow manufacturers to finally address true root causes that can lead to a marked increase in product confidence. In the past decade, pharmaceutical, medical device, and food manufacturers have increased their focus on controlling and managing the performance of their suppliers in an effort to improve the confidence of the materials going into the final marketed products and to improve patient and customer confidence in final product reliability and safety. Concerned that product confidence has not improved, Xavier University launched the Integrity of Supply Initiative in 2012 with a team of industry leaders and U.S. Food and Drug Administration officials. Through this initiative, data generated has revealed that manufacturers either unknowingly increase the potential for error or can control/prevent many aspects of product confidence failure. Product confidence can be improved by shifting the focus from controlling supplier practices to controlling the practices of the manufacturers themselves. © PDA, Inc. 2015.

Nuclear criticality safety bounding analysis for the in-tank-precipitation (ITP) process, impacted by fissile isotopic weight fractions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bess, C.E.

The In-Tank Precipitation process (ITP) receives High Level Waste (HLW) supernatant liquid containing radionuclides in waste processing tank 48H. Sodium tetraphenylborate, NaTPB, and monosodium titanate (MST), NaTi{sub 2}O{sub 5}H, are added for removal of radioactive Cs and Sr, respectively. In addition to removal of radio-strontium, MST will also remove plutonium and uranium. The majority of the feed solutions to ITP will come from the dissolution of supernate that had been concentrated by evaporation to a crystallized salt form, commonly referred to as saltcake. The concern for criticality safety arises from the adsorption of U and Pt onto MST. If sufficientmore » mass and optimum conditions are achieved then criticality is credible. The concentration of u and Pt from solution into the smaller volume of precipitate represents a concern for criticality. This report supplements WSRC-TR-93-171, Nuclear Criticality Safety Bounding Analysis For The In-Tank-Precipitation (ITP) Process. Criticality safety in ITP can be analyzed by two bounding conditions: (1) the minimum safe ratio of MST to fissionable material and (2) the maximum fissionable material adsorption capacity of the MST. Calculations have provided the first bounding condition and experimental analysis has established the second. This report combines these conditions with canyon facility data to evaluate the potential for criticality in the ITP process due to the adsorption of the fissionable material from solution. In addition, this report analyzes the potential impact of increased U loading onto MST. Results of this analysis demonstrate a greater safety margin for ITP operations than the previous analysis. This report further demonstrates that the potential for criticality in the ITP process due to adsorption of fissionable material by MST is not credible.« less

Overview of critical risk factors in Power-Two-Wheeler safety.

PubMed

Vlahogianni, Eleni I; Yannis, George; Golias, John C

2012-11-01

Power-Two-Wheelers (PTWs) constitute a vulnerable class of road users with increased frequency and severity of accidents. The present paper focuses of the PTW accident risk factors and reviews existing literature with regard to the PTW drivers' interactions with the automobile drivers, as well as interactions with infrastructure elements and weather conditions. Several critical risk factors are revealed with different levels of influence to PTW accident likelihood and severity. A broad classification based on the magnitude and the need for further research for each risk factor is proposed. The paper concludes by discussing the importance of dealing with accident configurations, the data quality and availability, methods implemented to model risk and exposure and risk identification which are critical for a thorough understanding of the determinants of PTW safety. Copyright © 2012 Elsevier Ltd. All rights reserved.

Robust optical sensors for safety critical automotive applications

NASA Astrophysics Data System (ADS)

De Locht, Cliff; De Knibber, Sven; Maddalena, Sam

2008-02-01

Optical sensors for the automotive industry need to be robust, high performing and low cost. This paper focuses on the impact of automotive requirements on optical sensor design and packaging. Main strategies to lower optical sensor entry barriers in the automotive market include: Perform sensor calibration and tuning by the sensor manufacturer, sensor test modes on chip to guarantee functional integrity at operation, and package technology is key. As a conclusion, optical sensor applications are growing in automotive. Optical sensor robustness matured to the level of safety critical applications like Electrical Power Assisted Steering (EPAS) and Drive-by-Wire by optical linear arrays based systems and Automated Cruise Control (ACC), Lane Change Assist and Driver Classification/Smart Airbag Deployment by camera imagers based systems.

49 CFR 176.704 - Requirements relating to transport indices and criticality safety indices.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 2 2011-10-01 2011-10-01 false Requirements relating to transport indices and... Requirements relating to transport indices and criticality safety indices. (a) The sum of the transport indices..., transport and unloading are to be supervised by persons qualified in the transport of radioactive material...

49 CFR 176.704 - Requirements relating to transport indices and criticality safety indices.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Requirements relating to transport indices and... Requirements relating to transport indices and criticality safety indices. (a) The sum of the transport indices..., transport and unloading are to be supervised by persons qualified in the transport of radioactive material...

Nuclear criticality safety evaluation of the passage of decontaminated salt solution from the ITP filters into tank 50H for interim storage

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hobbs, D.T.; Davis, J.R.

This report assesses the nuclear criticality safety associated with the decontaminated salt solution after passing through the In-Tank Precipitation (ITP) filters, through the stripper columns and into Tank 50H for interim storage until transfer to the Saltstone facility. The criticality safety basis for the ITP process is documented. Criticality safety in the ITP filtrate has been analyzed under normal and process upset conditions. This report evaluates the potential for criticality due to the precipitation or crystallization of fissionable material from solution and an ITP process filter failure in which insoluble material carryover from salt dissolution is present. It is concludedmore » that no single inadvertent error will cause criticality and that the process will remain subcritical under normal and credible abnormal conditions.« less

Evaluating Models of Human Performance: Safety-Critical Systems Applications

NASA Technical Reports Server (NTRS)

Feary, Michael S.

2012-01-01

This presentation is part of panel discussion on Evaluating Models of Human Performance. The purpose of this panel is to discuss the increasing use of models in the world today and specifically focus on how to describe and evaluate models of human performance. My presentation will focus on discussions of generating distributions of performance, and the evaluation of different strategies for humans performing tasks with mixed initiative (Human-Automation) systems. I will also discuss issues with how to provide Human Performance modeling data to support decisions on acceptability and tradeoffs in the design of safety critical systems. I will conclude with challenges for the future.

Current Developments in Measuring Academic Behavioural Confidence

ERIC Educational Resources Information Center

Sander, Paul

2009-01-01

Using published findings and by further analyses of existing data, the structure, validity and utility of the Academic Behavioural Confidence scale (ABC) is critically considered. Validity is primarily assessed through the scale's relationship with other existing scales as well as by looking for predicted differences. The utility of the ABC scale…

Application of the SCALE TSUNAMI Tools for the Validation of Criticality Safety Calculations Involving 233U

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mueller, Don; Rearden, Bradley T; Hollenbach, Daniel F

2009-02-01

The Radiochemical Development Facility at Oak Ridge National Laboratory has been storing solid materials containing 233U for decades. Preparations are under way to process these materials into a form that is inherently safe from a nuclear criticality safety perspective. This will be accomplished by down-blending the {sup 233}U materials with depleted or natural uranium. At the request of the U.S. Department of Energy, a study has been performed using the SCALE sensitivity and uncertainty analysis tools to demonstrate how these tools could be used to validate nuclear criticality safety calculations of selected process and storage configurations. ISOTEK nuclear criticality safetymore » staff provided four models that are representative of the criticality safety calculations for which validation will be needed. The SCALE TSUNAMI-1D and TSUNAMI-3D sequences were used to generate energy-dependent k{sub eff} sensitivity profiles for each nuclide and reaction present in the four safety analysis models, also referred to as the applications, and in a large set of critical experiments. The SCALE TSUNAMI-IP module was used together with the sensitivity profiles and the cross-section uncertainty data contained in the SCALE covariance data files to propagate the cross-section uncertainties ({Delta}{sigma}/{sigma}) to k{sub eff} uncertainties ({Delta}k/k) for each application model. The SCALE TSUNAMI-IP module was also used to evaluate the similarity of each of the 672 critical experiments with each application. Results of the uncertainty analysis and similarity assessment are presented in this report. A total of 142 experiments were judged to be similar to application 1, and 68 experiments were judged to be similar to application 2. None of the 672 experiments were judged to be adequately similar to applications 3 and 4. Discussion of the uncertainty analysis and similarity assessment is provided for each of the four applications. Example upper subcritical limits (USLs) were

Worse than enemies. The CEO's destructive confidant.

PubMed

Sulkowicz, Kerry J

2004-02-01

The CEO is often the most isolated and protected employee in the organization. Few leaders, even veteran CEOs, can do the job without talking to someone about their experiences, which is why most develop a close relationship with a trusted colleague, a confidant to whom they can tell their thoughts and fears. In his work with leaders, the author has found that many CEO-confidant relationships function very well. The confidants keep their leaders' best interests at heart. They derive their gratification vicariously, through the help they provide rather than through any personal gain, and they are usually quite aware that a person in their position can potentially abuse access to the CEO's innermost secrets. Unfortunately, almost as many confidants will end up hurting, undermining, or otherwise exploiting CEOs when the executives are at their most vulnerable. These confidants rarely make the headlines, but behind the scenes they do enormous damage to the CEO and to the organization as a whole. What's more, the leader is often the last one to know when or how the confidant relationship became toxic. The author has identified three types of destructive confidants. The reflector mirrors the CEO, constantly reassuring him that he is the "fairest CEO of them all." The insulator buffers the CEO from the organization, preventing critical information from getting in or out. And the usurper cunningly ingratiates himself with the CEO in a desperate bid for power. This article explores how the CEO-confidant relationship plays out with each type of adviser and suggests ways CEOs can avoid these destructive relationships.

Bootstrap confidence levels for phylogenetic trees.

PubMed

Efron, B; Halloran, E; Holmes, S

1996-07-09

Evolutionary trees are often estimated from DNA or RNA sequence data. How much confidence should we have in the estimated trees? In 1985, Felsenstein [Felsenstein, J. (1985) Evolution 39, 783-791] suggested the use of the bootstrap to answer this question. Felsenstein's method, which in concept is a straightforward application of the bootstrap, is widely used, but has been criticized as biased in the genetics literature. This paper concerns the use of the bootstrap in the tree problem. We show that Felsenstein's method is not biased, but that it can be corrected to better agree with standard ideas of confidence levels and hypothesis testing. These corrections can be made by using the more elaborate bootstrap method presented here, at the expense of considerably more computation.

Pharmaceutical pictograms for low-literate patients: Understanding, risk of false confidence, and evidence-based design strategies.

PubMed

van Beusekom, Mara M; Land-Zandstra, Anne M; Bos, Mark J W; van den Broek, Jos M; Guchelaar, Henk-Jan

2017-05-01

This study aims to (1) evaluate ten pharmaceutical pictograms for low-literate patients on understandability, (2) assess the risk of false confidence in understanding, and (3) identify how the design can be improved to increase understandability. Interviews were conducted with n=197 pharmacy visitors in the Netherlands. Additional qualitative discussions were held with n=30 adequately and n=25 low-literate participants (assessed with REALM-D). Qualitative data were analysed using the Thematic Framework approach. Half of the pictograms reached 67% understanding (31.0%-98.5%); two did in the low-literate group. Three pictograms showed a risk for false confidence. Pictograms appeared to be most effective when people were familiar with their visual elements and messages. Low-literate people have more difficulty understanding pictograms than people with adequate literacy. While the risk of false confidence is low, for critical safety information, 67% understanding might not be sufficient. Design strategies for pharmaceutical pictograms should focus on familiarity, simplicity, and showing the intake and effect of medicine. Health professionals should go over the meaning of pictograms when providing drug information to patients to increase patients' familiarity with the message and to ensure that all pictograms are sufficiently understood. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Determination of Slope Safety Factor with Analytical Solution and Searching Critical Slip Surface with Genetic-Traversal Random Method

PubMed Central

2014-01-01

In the current practice, to determine the safety factor of a slope with two-dimensional circular potential failure surface, one of the searching methods for the critical slip surface is Genetic Algorithm (GA), while the method to calculate the slope safety factor is Fellenius' slices method. However GA needs to be validated with more numeric tests, while Fellenius' slices method is just an approximate method like finite element method. This paper proposed a new method to determine the minimum slope safety factor which is the determination of slope safety factor with analytical solution and searching critical slip surface with Genetic-Traversal Random Method. The analytical solution is more accurate than Fellenius' slices method. The Genetic-Traversal Random Method uses random pick to utilize mutation. A computer automatic search program is developed for the Genetic-Traversal Random Method. After comparison with other methods like slope/w software, results indicate that the Genetic-Traversal Random Search Method can give very low safety factor which is about half of the other methods. However the obtained minimum safety factor with Genetic-Traversal Random Search Method is very close to the lower bound solutions of slope safety factor given by the Ansys software. PMID:24782679

Critical safety assurance factors for manned spacecraft - A fire safety perspective

NASA Technical Reports Server (NTRS)

Rodney, George A.

1990-01-01

Safety assurance factors for manned spacecraft are discussed with a focus on the Space Station Freedom. A hazard scenario is provided to demonstrate a process commonly used by safety engineers and other analysts to identify onboard safety risks. Fire strategies are described, including a review of fire extinguishing agents being considered for the Space Station. Lessons learned about fire safety technology in other areas are also noted. NASA and industry research on fire safety applications is discussed. NASA's approach to ensuring safety for manned spacecraft is addressed in the context of its multidiscipline program.

Criticality safety strategy and analysis summary for the fuel cycle facility electrorefiner at Argonne National Laboratory West

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mariani, R.D.; Benedict, R.W.; Lell, R.M.

1996-05-01

As part of the termination activities of Experimental Breeder Reactor II (EBR-II) at Argonne National Laboratory (ANL) West, the spent metallic fuel from EBR-II will be treated in the fuel cycle facility (FCF). A key component of the spent-fuel treatment process in the FCF is the electrorefiner (ER) in which the actinide metals are separated from the active metal fission products and the reactive bond sodium. In the electrorefining process, the metal fuel is anodically dissolved into a high-temperature molten salt, and refined uranium or uranium/plutonium products are deposited at cathodes. The criticality safety strategy and analysis for the ANLmore » West FCF ER is summarized. The FCF ER operations and processes formed the basis for evaluating criticality safety and control during actinide metal fuel refining. To show criticality safety for the FCF ER, the reference operating conditions for the ER had to be defined. Normal operating envelopes (NOEs) were then defined to bracket the important operating conditions. To keep the operating conditions within their NOEs, process controls were identified that can be used to regulate the actinide forms and content within the ER. A series of operational checks were developed for each operation that will verify the extent or success of an operation. The criticality analysis considered the ER operating conditions at their NOE values as the point of departure for credible and incredible failure modes. As a result of the analysis, FCF ER operations were found to be safe with respect to criticality.« less

Critical Incident Stress Management (CISM) in complex systems: cultural adaptation and safety impacts in healthcare.

PubMed

Müller-Leonhardt, Alice; Mitchell, Shannon G; Vogt, Joachim; Schürmann, Tim

2014-07-01

In complex systems, such as hospitals or air traffic control operations, critical incidents (CIs) are unavoidable. These incidents can not only become critical for victims but also for professionals working at the "sharp end" who may have to deal with critical incident stress (CIS) reactions that may be severe and impede emotional, physical, cognitive and social functioning. These CIS reactions may occur not only under exceptional conditions but also during every-day work and become an important safety issue. In contrast to air traffic management (ATM) operations in Europe, which have readily adopted critical incident stress management (CISM), most hospitals have not yet implemented comprehensive peer support programs. This survey was conducted in 2010 at the only European general hospital setting which implemented CISM program since 2004. The aim of the article is to describe possible contribution of CISM in hospital settings framed from the perspective of organizational safety and individual health for healthcare professionals. Findings affirm that daily work related incidents also can become critical for healthcare professionals. Program efficiency appears to be influenced by the professional culture, as well as organizational structure and policies. Overall, findings demonstrate that the adaptation of the CISM program in general hospitals takes time but, once established, it may serve as a mechanism for changing professional culture, thereby permitting the framing of even small incidents or near misses as an opportunity to provide valuable feedback to the system. Copyright © 2014 Elsevier Ltd. All rights reserved.

North Dakota Leadership Training Boosts Confidence and Involvement

ERIC Educational Resources Information Center

Flage, Lynette; Hvidsten, Marie; Vettern, Rachelle

2012-01-01

Effective leadership is critical for communities as they work to maintain their vitality and sustainability for years to come. The purpose of the study reported here was to assess confidence levels and community engagement of community leadership program participants in North Dakota State University Extension programs. Through a survey…

ESAS Deliverable PS 1.1.2.3: Customer Survey on Code Generations in Safety-Critical Applications

NASA Technical Reports Server (NTRS)

Schumann, Johann; Denney, Ewen

2006-01-01

Automated code generators (ACG) are tools that convert a (higher-level) model of a software (sub-)system into executable code without the necessity for a developer to actually implement the code. Although both commercially supported and in-house tools have been used in many industrial applications, little data exists on how these tools are used in safety-critical domains (e.g., spacecraft, aircraft, automotive, nuclear). The aims of the survey, therefore, were threefold: 1) to determine if code generation is primarily used as a tool for prototyping, including design exploration and simulation, or for fiight/production code; 2) to determine the verification issues with code generators relating, in particular, to qualification and certification in safety-critical domains; and 3) to determine perceived gaps in functionality of existing tools.

Mission and Safety Critical (MASC) plans for the MASC Kernel simulation

NASA Technical Reports Server (NTRS)

1991-01-01

This report discusses a prototype for Mission and Safety Critical (MASC) kernel simulation which explains the intended approach and how the simulation will be used. Smalltalk is chosen for the simulation because of usefulness in quickly building working models of the systems and its object-oriented approach to software. A scenario is also introduced to give details about how the simulation works. The eventual system will be a fully object-oriented one implemented in Ada via Dragoon. To implement the simulation, a scenario using elements typical of those in the Space Station, was created.

Validation and Verification of Future Integrated Safety-Critical Systems Operating under Off-Nominal Conditions

NASA Technical Reports Server (NTRS)

Belcastro, Christine M.

2010-01-01

Loss of control remains one of the largest contributors to aircraft fatal accidents worldwide. Aircraft loss-of-control accidents are highly complex in that they can result from numerous causal and contributing factors acting alone or (more often) in combination. Hence, there is no single intervention strategy to prevent these accidents and reducing them will require a holistic integrated intervention capability. Future onboard integrated system technologies developed for preventing loss of vehicle control accidents must be able to assure safe operation under the associated off-nominal conditions. The transition of these technologies into the commercial fleet will require their extensive validation and verification (V and V) and ultimate certification. The V and V of complex integrated systems poses major nontrivial technical challenges particularly for safety-critical operation under highly off-nominal conditions associated with aircraft loss-of-control events. This paper summarizes the V and V problem and presents a proposed process that could be applied to complex integrated safety-critical systems developed for preventing aircraft loss-of-control accidents. A summary of recent research accomplishments in this effort is also provided.

Critical roles of orthopaedic surgeon leadership in healthcare systems to improve orthopaedic surgical patient safety.

PubMed

Kuo, Calvin C; Robb, William J

2013-06-01

The prevention of medical and surgical harm remains an important public health problem despite increased awareness and implementation of safety programs. Successful introduction and maintenance of surgical safety programs require both surgeon leadership and collaborative surgeon-hospital alignment. Documentation of success of such surgical safety programs in orthopaedic practice is limited. We describe the scope of orthopaedic surgical patient safety issues, define critical elements of orthopaedic surgical safety, and outline leadership roles for orthopaedic surgeons needed to establish and sustain a culture of safety in contemporary healthcare systems. We identified the most common causes of preventable surgical harm based on adverse and sentinel surgical events reported to The Joint Commission. A comprehensive literature review through a MEDLINE(®) database search (January 1982 through April 2012) to identify pertinent orthopaedic surgical safety articles found 14 articles. Where gaps in orthopaedic literature were identified, the review was supplemented by 22 nonorthopaedic surgical references. Our final review included 36 articles. Six important surgical safety program elements needed to eliminate preventable surgical harm were identified: (1) effective surgical team communication, (2) proper informed consent, (3) implementation and regular use of surgical checklists, (4) proper surgical site/procedure identification, (5) reduction of surgical team distractions, and (6) routine surgical data collection and analysis to improve the safety and quality of surgical patient care. Successful surgical safety programs require a culture of safety supported by all six key surgical safety program elements, active surgeon champions, and collaborative hospital and/or administrative support designed to enhance surgical safety and improve surgical patient outcomes. Further research measuring improvements from such surgical safety systems in orthopaedic care is needed.

Elective Self-Care Course Emphasizing Critical Reasoning Principles

PubMed Central

2011-01-01

Objectives. To create, implement, and assess a self-directed online course based on 3 critical reasoning principles to develop pharmacy students’ skills in literature appraisal, content, metacognition, and assessment. Design. Students completed 3 assignments for the course: compile a literature appraisal on a healthcare topic; plan learning objectives and meta-cognitive skills for a learning module; and create a case-based online lesson with multi-structured feedback. Assessment. An online exit survey evaluated students’ perceptions regarding development of ACE (agency, collaboration, expertise) principles and preparation for competency. Students reported acquisition of ACE principles and noted improvements in their learning approaches, sense of responsibility for individual and community learning, skills, and confidence. Conclusions. An online elective course in self-care addressed practice standards for patient safety, maintenance of competency, and interprofessional education by emphasizing critical reasoning skills. PMID:22171110

Safety Criticality Standards Using the French CRISTAL Code Package: Application to the AREVA NP UO{sub 2} Fuel Fabrication Plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Doucet, M.; Durant Terrasson, L.; Mouton, J.

2006-07-01

Criticality safety evaluations implement requirements to proof of sufficient sub critical margins outside of the reactor environment for example in fuel fabrication plants. Basic criticality data (i.e., criticality standards) are used in the determination of sub critical margins for all processes involving plutonium or enriched uranium. There are several criticality international standards, e.g., ARH-600, which is one the US nuclear industry relies on. The French Nuclear Safety Authority (DGSNR and its advising body IRSN) has requested AREVA NP to review the criticality standards used for the evaluation of its Low Enriched Uranium fuel fabrication plants with CRISTAL V0, the recentlymore » updated French criticality evaluation package. Criticality safety is a concern for every phase of the fabrication process including UF{sub 6} cylinder storage, UF{sub 6}-UO{sub 2} conversion, powder storage, pelletizing, rod loading, assembly fabrication, and assembly transportation. Until 2003, the accepted criticality standards were based on the French CEA work performed in the late seventies with the APOLLO1 cell/assembly computer code. APOLLO1 is a spectral code, used for evaluating the basic characteristics of fuel assemblies for reactor physics applications, which has been enhanced to perform criticality safety calculations. Throughout the years, CRISTAL, starting with APOLLO1 and MORET 3 (a 3D Monte Carlo code), has been improved to account for the growth of its qualification database and for increasing user requirements. Today, CRISTAL V0 is an up-to-date computational tool incorporating a modern basic microscopic cross section set based on JEF2.2 and the comprehensive APOLLO2 and MORET 4 codes. APOLLO2 is well suited for criticality standards calculations as it includes a sophisticated self shielding approach, a P{sub ij} flux determination, and a 1D transport (S{sub n}) process. CRISTAL V0 is the result of more than five years of development work focusing on

The Integrated Safety-Critical Advanced Avionics Communication and Control (ISAACC) System Concept: Infrastructure for ISHM

NASA Technical Reports Server (NTRS)

Gwaltney, David A.; Briscoe, Jeri M.

2005-01-01

Integrated System Health Management (ISHM) architectures for spacecraft will include hard real-time, critical subsystems and soft real-time monitoring subsystems. Interaction between these subsystems will be necessary and an architecture supporting multiple criticality levels will be required. Demonstration hardware for the Integrated Safety-Critical Advanced Avionics Communication & Control (ISAACC) system has been developed at NASA Marshall Space Flight Center. It is a modular system using a commercially available time-triggered protocol, ?Tp/C, that supports hard real-time distributed control systems independent of the data transmission medium. The protocol is implemented in hardware and provides guaranteed low-latency messaging with inherent fault-tolerance and fault-containment. Interoperability between modules and systems of modules using the TTP/C is guaranteed through definition of messages and the precise message schedule implemented by the master-less Time Division Multiple Access (TDMA) communications protocol. "Plug-and-play" capability for sensors and actuators provides automatically configurable modules supporting sensor recalibration and control algorithm re-tuning without software modification. Modular components of controlled physical system(s) critical to control algorithm tuning, such as pumps or valve components in an engine, can be replaced or upgraded as "plug and play" components without modification to the ISAACC module hardware or software. ISAACC modules can communicate with other vehicle subsystems through time-triggered protocols or other communications protocols implemented over Ethernet, MIL-STD- 1553 and RS-485/422. Other communication bus physical layers and protocols can be included as required. In this way, the ISAACC modules can be part of a system-of-systems in a vehicle with multi-tier subsystems of varying criticality. The goal of the ISAACC architecture development is control and monitoring of safety critical systems of a

Factors affecting midwives' confidence in intrapartum care: a phenomenological study.

PubMed

Bedwell, Carol; McGowan, Linda; Lavender, Tina

2015-01-01

midwives are frequently the lead providers of care for women throughout labour and birth. In order to perform their role effectively and provide women with the choices they require midwives need to be confident in their practice. This study explores factors which may affect midwives' confidence in their practice. hermeneutic phenomenology formed the theoretical basis for the study. Prospective longitudinal data collection was completed using diaries and semi-structured interviews. Twelve midwives providing intrapartum care in a variety of settings were recruited to ensure a variety of experiences in different contexts were captured. the principal factor affecting workplace confidence, both positively and negatively, was the influence of colleagues. Perceived autonomy and a sense of familiarity could also enhance confidence. However, conflict in the workplace was a critical factor in reducing midwives' confidence. Confidence was an important, but fragile, phenomenon to midwives and they used a variety of coping strategies, emotional intelligence and presentation management to maintain it. this is the first study to highlight both the factors influencing midwives' workplace confidence and the strategies midwives employed to maintain their confidence. Confidence is important in maintaining well-being and workplace culture may play a role in explaining the current low morale within the midwifery workforce. This may have implications for women's choices and care. Support, effective leadership and education may help midwives develop and sustain a positive sense of confidence. Copyright © 2014 Elsevier Ltd. All rights reserved.

Risk and Safety of Probiotics

PubMed Central

Doron, Shira; Snydman, David R.

2015-01-01

Probiotics have been used safely for years. Safety outcomes are inconsistently reported in published clinical trials. In 2011, a report released by the Agency for Healthcare Research and Quality concluded that, although the existing probiotic clinical trials reveal no evidence of increased risk, “the current literature is not well equipped to answer questions on the safety of probiotics in intervention studies with confidence.” Critics point out that the preponderance of evidence, including the long history of safe probiotic use as well as data from clinical trials, and animal and in vitro studies all support the assumption that probiotics are generally safe for most populations. Theoretical risks have been described in case reports, clinical trial results and experimental models, include systemic infections, deleterious metabolic activities, excessive immune stimulation in susceptible individuals, gene transfer and gastrointestinal side effects. More research is needed to properly describe the incidence and severity of adverse events related to probiotics. PMID:25922398

Addressing the vaccine confidence gap.

PubMed

Larson, Heidi J; Cooper, Louis Z; Eskola, Juhani; Katz, Samuel L; Ratzan, Scott

2011-08-06

Vaccines--often lauded as one of the greatest public health interventions--are losing public confidence. Some vaccine experts have referred to this decline in confidence as a crisis. We discuss some of the characteristics of the changing global environment that are contributing to increased public questioning of vaccines, and outline some of the specific determinants of public trust. Public decision making related to vaccine acceptance is neither driven by scientific nor economic evidence alone, but is also driven by a mix of psychological, sociocultural, and political factors, all of which need to be understood and taken into account by policy and other decision makers. Public trust in vaccines is highly variable and building trust depends on understanding perceptions of vaccines and vaccine risks, historical experiences, religious or political affiliations, and socioeconomic status. Although provision of accurate, scientifically based evidence on the risk-benefit ratios of vaccines is crucial, it is not enough to redress the gap between current levels of public confidence in vaccines and levels of trust needed to ensure adequate and sustained vaccine coverage. We call for more research not just on individual determinants of public trust, but on what mix of factors are most likely to sustain public trust. The vaccine community demands rigorous evidence on vaccine efficacy and safety and technical and operational feasibility when introducing a new vaccine, but has been negligent in demanding equally rigorous research to understand the psychological, social, and political factors that affect public trust in vaccines. Copyright © 2011 Elsevier Ltd. All rights reserved.

Surveying wearable human assistive technology for life and safety critical applications: standards, challenges and opportunities.

PubMed

Alam, Muhammad Mahtab; Ben Hamida, Elyes

2014-05-23

In this survey a new application paradigm life and safety for critical operations and missions using wearable Wireless Body Area Networks (WBANs) technology is introduced. This paradigm has a vast scope of applications, including disaster management, worker safety in harsh environments such as roadside and building workers, mobile health monitoring, ambient assisted living and many more. It is often the case that during the critical operations and the target conditions, the existing infrastructure is either absent, damaged or overcrowded. In this context, it is envisioned that WBANs will enable the quick deployment of ad-hoc/on-the-fly communication networks to help save many lives and ensuring people's safety. However, to understand the applications more deeply and their specific characteristics and requirements, this survey presents a comprehensive study on the applications scenarios, their context and specific requirements. It explores details of the key enabling standards, existing state-of-the-art research studies, and projects to understand their limitations before realizing aforementioned applications. Application-specific challenges and issues are discussed comprehensively from various perspectives and future research and development directions are highlighted as an inspiration for new innovative solutions. To conclude, this survey opens up a good opportunity for companies and research centers to investigate old but still new problems, in the realm of wearable technologies, which are increasingly evolving and getting more and more attention recently.

Surveying Wearable Human Assistive Technology for Life and Safety Critical Applications: Standards, Challenges and Opportunities

PubMed Central

Alam, Muhammad Mahtab; Ben Hamida, Elyes

2014-01-01

In this survey a new application paradigm life and safety for critical operations and missions using wearable Wireless Body Area Networks (WBANs) technology is introduced. This paradigm has a vast scope of applications, including disaster management, worker safety in harsh environments such as roadside and building workers, mobile health monitoring, ambient assisted living and many more. It is often the case that during the critical operations and the target conditions, the existing infrastructure is either absent, damaged or overcrowded. In this context, it is envisioned that WBANs will enable the quick deployment of ad-hoc/on-the-fly communication networks to help save many lives and ensuring people's safety. However, to understand the applications more deeply and their specific characteristics and requirements, this survey presents a comprehensive study on the applications scenarios, their context and specific requirements. It explores details of the key enabling standards, existing state-of-the-art research studies, and projects to understand their limitations before realizing aforementioned applications. Application-specific challenges and issues are discussed comprehensively from various perspectives and future research and development directions are highlighted as an inspiration for new innovative solutions. To conclude, this survey opens up a good opportunity for companies and research centers to investigate old but still new problems, in the realm of wearable technologies, which are increasingly evolving and getting more and more attention recently. PMID:24859024

Preoperative surgical rehearsal using cadaveric fresh tissue surgical simulation increases resident operative confidence.

PubMed

Weber, Erin L; Leland, Hyuma A; Azadgoli, Beina; Minneti, Michael; Carey, Joseph N

2017-08-01

Rehearsal is an essential part of mastering any technical skill. The efficacy of surgical rehearsal is currently limited by low fidelity simulation models. Fresh cadaver models, however, offer maximal surgical simulation. We hypothesize that preoperative surgical rehearsal using fresh tissue surgical simulation will improve resident confidence and serve as an important adjunct to current training methods. Preoperative rehearsal of surgical procedures was performed by plastic surgery residents using fresh cadavers in a simulated operative environment. Rehearsal was designed to mimic the clinical operation, complete with a surgical technician to assist. A retrospective, web-based survey was used to assess resident perception of pre- and post-procedure confidence, preparation, technique, speed, safety, and anatomical knowledge on a 5-point scale (1= not confident, 5= very confident). Twenty-six rehearsals were performed by 9 residents (PGY 1-7) an average of 4.7±2.1 days prior to performance of the scheduled operation. Surveys demonstrated a median pre-simulation confidence score of 2 and a post-rehearsal score of 4 (P<0.01). The perceived improvement in confidence and performance was greatest when simulation was performed within 3 days of the scheduled case. All residents felt that cadaveric simulation was better than standard preparation methods of self-directed reading or discussion with other surgeons. All residents believed that their technique, speed, safety, and anatomical knowledge improved as a result of simulation. Fresh tissue-based preoperative surgical rehearsal was effectively implemented in the residency program. Resident confidence and perception of technique improved. Survey results suggest that cadaveric simulation is beneficial for all levels of residents. We believe that implementation of preoperative surgical rehearsal is an effective adjunct to surgical training at all skill levels in the current environment of decreased work hours.

An Anesthesia Preinduction Checklist to Improve Information Exchange, Knowledge of Critical Information, Perception of Safety, and Possibly Perception of Teamwork in Anesthesia Teams.

PubMed

Tscholl, David W; Weiss, Mona; Kolbe, Michaela; Staender, Sven; Seifert, Burkhardt; Landert, Daniel; Grande, Bastian; Spahn, Donat R; Noethiger, Christoph B

2015-10-01

An anesthesia preinduction checklist (APIC) to be performed before anesthesia induction was introduced and evaluated with respect to 5 team-level outcomes, each being a surrogate end point for patient safety: information exchange (the percentage of checklist items exchanged by a team, out of 12 total items); knowledge of critical information (the percentage of critical information items out of 5 total items such as allergies, reported as known by the members of a team); team members' perceptions of safety (the median scores given by the members of a team on a continuous rating scale); their perception of teamwork (the median scores given by the members of a team on a continuous rating scale); and clinical performance (the percentage of completed items out of 14 required tasks, e.g., suction device checked). A prospective interventional study comparing anesthesia teams using the APIC with a control group not using the APIC was performed using a multimethod design. Trained observers rated information exchange and clinical performance during on-site observations of anesthesia inductions. After the observations, each team member indicated the critical information items they knew and their perceptions of safety and teamwork. One hundred five teams using the APIC were compared with 100 teams not doing so. The medians of the team-level outcome scores in the APIC group versus the control group were as follows: information exchange: 100% vs 33% (P < 0.001), knowledge of critical information: 100% vs 90% (P < 0.001), perception of safety: 91% vs 84% (P < 0.001), perception of teamwork: 90% vs 86% (P = 0.028), and clinical performance: 93% vs 93% (P = 0.60). This study provides empirical evidence that the use of a preinduction checklist significantly improves information exchange, knowledge of critical information, and perception of safety in anesthesia teams-all parameters contributing to patient safety. There was a trend indicating improved perception of teamwork.

Family Presence During Resuscitation: Physicians' Perceptions of Risk, Benefit, and Self-Confidence.

PubMed

Twibell, Renee Samples; Siela, Debra; Neal, Alexis; Riwitis, Cheryl; Beane, Heather

Families often desire proximity to loved ones during life-threatening resuscitations and perceive clear benefits to being present. However, critical care nurses and physicians perceive risks and benefits. Whereas research is accumulating on nurses' perceptions of family presence, physicians' perspectives have not been clearly explicated. Psychometrically sound measures of physicians' perceptions are needed to create new knowledge and enhance collaboration among critical care nurses and physicians during resuscitation events. This study tests 2 new instruments that measure physicians' perceived risks, benefits, and self-confidence related to family presence during resuscitation. By a correlational design, a convenience sample of physicians (N = 195) from diverse clinical specialties in 1 hospital in the United States completed the Physicians' Family Presence Risk-Benefit Scale and Physicians' Family Presence Self-confidence Scale. Findings supported the internal consistency reliability and construct validity of both new scales. Mean scale scores indicated that physicians perceived more risk than benefit and were confident in managing resuscitations with families present, although more than two-thirds reported feeling anxious. Higher self-confidence was significantly related to more perceived benefit and less perceived risk (P = .001). Younger physicians, family practice physicians, and physicians who previously had invited family presence expressed more positive perceptions (P = .05-.001). These 2 new scales offer a means to assess key perceptions of physicians related to family presence. Further testing in diverse physician populations may further validate the scales and yield knowledge that can strengthen collaboration among critical care nurses and physicians and improve patient and family outcomes.

Self-reported patient safety competence among Canadian medical students and postgraduate trainees: a cross-sectional survey.

PubMed

Doyle, Patricia; VanDenKerkhof, Elizabeth G; Edge, Dana S; Ginsburg, Liane; Goldstein, David H

2015-02-01

Quality and patient safety (PS) are critical components of medical education. This study reports on the self-reported PS competence of medical students and postgraduate trainees. The Health Professional Education in Patient Safety Survey was administered to medical students and postgraduate trainees in January 2012. PS dimension scores were compared across learning settings (classroom and clinical) and year in programme. Sixty-three percent (255/406) of medical students and 32% (141/436) of postgraduate trainees responded. In general, both groups were most confident in their learning of clinical safety skills (eg, hand hygiene) and least confident in learning about sociocultural aspects of safety (eg, understanding human factors). Medical students' confidence in most aspects of safety improved with years of training. For some of the more intangible dimensions (teamwork and culture), medical students in their final year had lower scores than students in earlier years. Thirty-eight percent of medical students felt they could approach someone engaging in unsafe practice, and the majority of medical students (85%) and postgraduate trainees (78%) agreed it was difficult to question authority. Our results suggest the need to improve the overall content, structure and integration of PS concepts in both classroom and clinical learning environments. Decreased confidence in sociocultural aspects of PS among medical students in the final year of training may indicate that culture in clinical settings negatively affects students' perceived PS competence. Alternatively, as medical students spend more time in the clinical setting, they may develop a clearer sense of what they do not know. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Two sides of the same coin: Monetary incentives concurrently improve and bias confidence judgments.

PubMed

Lebreton, Maël; Langdon, Shari; Slieker, Matthijs J; Nooitgedacht, Jip S; Goudriaan, Anna E; Denys, Damiaan; van Holst, Ruth J; Luigjes, Judy

2018-05-01

Decisions are accompanied by a feeling of confidence, that is, a belief about the decision being correct. Confidence accuracy is critical, notably in high-stakes situations such as medical or financial decision-making. We investigated how incentive motivation influences confidence accuracy by combining a perceptual task with a confidence incentivization mechanism. By varying the magnitude and valence (gains or losses) of monetary incentives, we orthogonalized their motivational and affective components. Corroborating theories of rational decision-making and motivation, our results first reveal that the motivational value of incentives improves aspects of confidence accuracy. However, in line with a value-confidence interaction hypothesis, we further show that the affective value of incentives concurrently biases confidence reports, thus degrading confidence accuracy. Finally, we demonstrate that the motivational and affective effects of incentives differentially affect how confidence builds on perceptual evidence. Together, these findings may provide new hints about confidence miscalibration in healthy or pathological contexts.

Two sides of the same coin: Monetary incentives concurrently improve and bias confidence judgments

PubMed Central

Lebreton, Maël; Slieker, Matthijs J.; Nooitgedacht, Jip S.; van Holst, Ruth J.; Luigjes, Judy

2018-01-01

Decisions are accompanied by a feeling of confidence, that is, a belief about the decision being correct. Confidence accuracy is critical, notably in high-stakes situations such as medical or financial decision-making. We investigated how incentive motivation influences confidence accuracy by combining a perceptual task with a confidence incentivization mechanism. By varying the magnitude and valence (gains or losses) of monetary incentives, we orthogonalized their motivational and affective components. Corroborating theories of rational decision-making and motivation, our results first reveal that the motivational value of incentives improves aspects of confidence accuracy. However, in line with a value-confidence interaction hypothesis, we further show that the affective value of incentives concurrently biases confidence reports, thus degrading confidence accuracy. Finally, we demonstrate that the motivational and affective effects of incentives differentially affect how confidence builds on perceptual evidence. Together, these findings may provide new hints about confidence miscalibration in healthy or pathological contexts. PMID:29854944

Software development for safety-critical medical applications

NASA Technical Reports Server (NTRS)

Knight, John C.

1992-01-01

There are many computer-based medical applications in which safety and not reliability is the overriding concern. Reduced, altered, or no functionality of such systems is acceptable as long as no harm is done. A precise, formal definition of what software safety means is essential, however, before any attempt can be made to achieve it. Without this definition, it is not possible to determine whether a specific software entity is safe. A set of definitions pertaining to software safety will be presented and a case study involving an experimental medical device will be described. Some new techniques aimed at improving software safety will also be discussed.

Safety survey report EBR-II safety survey, ANL-west health protection, industrial safety and fire protection survey

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dunbar, K.A.

1972-01-10

A safety survey covering the disciplines of Reactor Safety, Nuclear Criticality Safety, Health Protection and Industrial Safety and Fire Protection was conducted at the ANL-West EBR-II FEF Complex during the period January 10-18, 1972. In addition, the entire ANL-West site was surveyed for Health Protection and Industrial Safety and Fire Protection. The survey was conducted by members of the AEC Chicago Operations Office, a member of RDT-HQ and a member of the RDT-ID site office. Eighteen recommendations resulted from the survey, eleven in the area of Industrial Safety and Fire Protection, five in the area of Reactor Safety and twomore » in the area of Nuclear Criticality Safety.« less

Sensitivity-Uncertainty Based Nuclear Criticality Safety Validation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, Forrest B.

2016-09-20

These are slides from a seminar given to the University of Mexico Nuclear Engineering Department. Whisper is a statistical analysis package developed to support nuclear criticality safety validation. It uses the sensitivity profile data for an application as computed by MCNP6 along with covariance files for the nuclear data to determine a baseline upper-subcritical-limit for the application. Whisper and its associated benchmark files are developed and maintained as part of MCNP6, and will be distributed with all future releases of MCNP6. Although sensitivity-uncertainty methods for NCS validation have been under development for 20 years, continuous-energy Monte Carlo codes such asmore » MCNP could not determine the required adjoint-weighted tallies for sensitivity profiles. The recent introduction of the iterated fission probability method into MCNP led to the rapid development of sensitivity analysis capabilities for MCNP6 and the development of Whisper. Sensitivity-uncertainty based methods represent the future for NCS validation – making full use of today’s computer power to codify past approaches based largely on expert judgment. Validation results are defensible, auditable, and repeatable as needed with different assumptions and process models. The new methods can supplement, support, and extend traditional validation approaches.« less

The Distribution of the Product Explains Normal Theory Mediation Confidence Interval Estimation.

PubMed

Kisbu-Sakarya, Yasemin; MacKinnon, David P; Miočević, Milica

2014-05-01

The distribution of the product has several useful applications. One of these applications is its use to form confidence intervals for the indirect effect as the product of 2 regression coefficients. The purpose of this article is to investigate how the moments of the distribution of the product explain normal theory mediation confidence interval coverage and imbalance. Values of the critical ratio for each random variable are used to demonstrate how the moments of the distribution of the product change across values of the critical ratio observed in research studies. Results of the simulation study showed that as skewness in absolute value increases, coverage decreases. And as skewness in absolute value and kurtosis increases, imbalance increases. The difference between testing the significance of the indirect effect using the normal theory versus the asymmetric distribution of the product is further illustrated with a real data example. This article is the first study to show the direct link between the distribution of the product and indirect effect confidence intervals and clarifies the results of previous simulation studies by showing why normal theory confidence intervals for indirect effects are often less accurate than those obtained from the asymmetric distribution of the product or from resampling methods.

Criticality safety evaluation for the Advanced Test Reactor enhanced low enriched uranium fuel elements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Montierth, Leland M.

2016-07-19

The Global Threat Reduction Initiative (GTRI) convert program is developing a high uranium density fuel based on a low enriched uranium (LEU) uranium-molybdenum alloy. Testing of prototypic GTRI fuel elements is necessary to demonstrate integrated fuel performance behavior and scale-up of fabrication techniques. GTRI Enhanced LEU Fuel (ELF) elements based on the ATR-Standard Size elements (all plates fueled) are to be fabricated for testing in the Advanced Test Reactor (ATR). While a specific ELF element design will eventually be provided for detailed analyses and in-core testing, this criticality safety evaluation (CSE) is intended to evaluate a hypothetical ELF element designmore » for criticality safety purposes. Existing criticality analyses have analyzed Standard (HEU) ATR elements from which controls have been derived. This CSE documents analysis that determines the reactivity of the hypothetical ELF fuel elements relative to HEU ATR elements and whether the existing HEU ATR element controls bound the ELF element. The initial calculations presented in this CSE analyzed the original ELF design, now referred to as Mod 0.1. In addition, as part of a fuel meat thickness optimization effort for reactor performance, other designs have been evaluated. As of early 2014 the most current conceptual designs are Mk1A and Mk1B, that were previously referred to as conceptual designs Mod 0.10 and Mod 0.11, respectively. Revision 1 evaluates the reactivity of the ATR HEU Mark IV elements for a comparison with the Mark VII elements.« less

77 FR 60479 - Burnup Credit in the Criticality Safety Analyses of Pressurized Water Reactor Spent Fuel in...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-03

... Pressurized Water Reactor Spent Fuel in Transportation and Storage Casks AGENCY: Nuclear Regulatory Commission... 3, entitled, ``Burnup Credit in the Criticality Safety Analyses of PWR [Pressurized Water Reactor... water reactor spent nuclear fuel (SNF) in transportation packages and storage casks. SFST-ISG-8...

Software Reliability Issues Concerning Large and Safety Critical Software Systems

NASA Technical Reports Server (NTRS)

Kamel, Khaled; Brown, Barbara

1996-01-01

This research was undertaken to provide NASA with a survey of state-of-the-art techniques using in industrial and academia to provide safe, reliable, and maintainable software to drive large systems. Such systems must match the complexity and strict safety requirements of NASA's shuttle system. In particular, the Launch Processing System (LPS) is being considered for replacement. The LPS is responsible for monitoring and commanding the shuttle during test, repair, and launch phases. NASA built this system in the 1970's using mostly hardware techniques to provide for increased reliability, but it did so often using custom-built equipment, which has not been able to keep up with current technologies. This report surveys the major techniques used in industry and academia to ensure reliability in large and critical computer systems.

How public health nurses' deal with sexting among young people: a qualitative inquiry using the critical incident technique.

PubMed

Clark, Maria; Lewis, Alison; Bradshaw, Sally; Bradbury-Jones, Caroline

2018-06-13

Globally, the potentially harmful effects of using cell phone technology for 'sexting' among young people, is a public health concern. The background literature indicates that sexting might have adverse psychosocial consequences for some young people who share partially nude images ('selfies'). Public health nurses (PHNs) could offer guidance to children and young people on digital safety, yet little is known about their role in this regard. This study explored PHNs' knowledge and confidence in addressing the issue among young people. A qualitative study was undertaken using the Critical Incident Technique. The study took place in 2016. Eighteen semi-structured interviews were conducted with PHNs in a region of England. Data were analysed through thematic analysis, and managed through the use of NViVo 11 software. From the entire data set, thirteen critical incidents were identified of which nine were deemed relevant for reporting in this paper. PHNs regarded sexting as a contemporary 'normalised' practice that takes place in what young people consider to be trusting relationships. PHNs' knowledge was informed by media reports that supported their beliefs about young peoples' vulnerability to risk-taking sexual behaviour. They were not confident about discussing sexting with young people, even though some PHNs had done so in light of concerns about potential child sexual exploitation. PHNs have a role to play in advising young people on digital safety, but findings of the study show that their role is not fully realised. They have some knowledge of sexting as a possible signifier of abusive behaviour. However, they are not always confident in dealing with the issue. Improving PHNs ability to promote digital safety through better understanding of technology use among young people is good safeguarding practice. This may, in turn, better define this important nursing contribution to public health.

Confidence Limits for the Indirect Effect: Distribution of the Product and Resampling Methods

ERIC Educational Resources Information Center

MacKinnon, David P.; Lockwood, Chondra M.; Williams, Jason

2004-01-01

The most commonly used method to test an indirect effect is to divide the estimate of the indirect effect by its standard error and compare the resulting z statistic with a critical value from the standard normal distribution. Confidence limits for the indirect effect are also typically based on critical values from the standard normal…

A computational framework for the study of confidence in humans and animals

PubMed Central

Kepecs, Adam; Mainen, Zachary F.

2012-01-01

Confidence judgements, self-assessments about the quality of a subject's knowledge, are considered a central example of metacognition. Prima facie, introspection and self-report appear the only way to access the subjective sense of confidence or uncertainty. Contrary to this notion, overt behavioural measures can be used to study confidence judgements by animals trained in decision-making tasks with perceptual or mnemonic uncertainty. Here, we suggest that a computational approach can clarify the issues involved in interpreting these tasks and provide a much needed springboard for advancing the scientific understanding of confidence. We first review relevant theories of probabilistic inference and decision-making. We then critically discuss behavioural tasks employed to measure confidence in animals and show how quantitative models can help to constrain the computational strategies underlying confidence-reporting behaviours. In our view, post-decision wagering tasks with continuous measures of confidence appear to offer the best available metrics of confidence. Since behavioural reports alone provide a limited window into mechanism, we argue that progress calls for measuring the neural representations and identifying the computations underlying confidence reports. We present a case study using such a computational approach to study the neural correlates of decision confidence in rats. This work shows that confidence assessments may be considered higher order, but can be generated using elementary neural computations that are available to a wide range of species. Finally, we discuss the relationship of confidence judgements to the wider behavioural uses of confidence and uncertainty. PMID:22492750

Forward Surgical Team Experience (FSTE) Is Associated With Increased Confidence With Combat Surgeon Trauma Skills.

PubMed

Mancini, D Joshua; Smith, Brian P; Polk, Travis M; Schwab, C William

2018-05-08

Little is known regarding the confidence of military surgeons prior to combat zone deployment. Military surgeons are frequently deployed without peers experienced in combat surgery. We hypothesized that forward surgical team experience (FSTE) increases surgeon confidence with critical skill sets. We conducted a national survey of military affiliated personnel. We used a novel survey instrument that was piloted and validated by experienced military surgeons to collect demographics, education, practice patterns, and confidence parameters for trauma and surgical critical care skills. Skills were defined as crucial operative techniques for hemorrhage control and resuscitation. Surveyors were blinded to participants, and surveys were returned electronically via REDCap database. Data were analyzed with SPSS using appropriate models. Significance was considered p < 0.05. Of 174 distributed surveys, 86 were completed. Nine individuals failed to characterize their FSTE, thus leaving a sample size of 77. At the time of first deployment, 78.4% were alone or with less experienced surgeons and 53.2% had less than 2 yr of post-residency practice. The respondents' confidence in damage control techniques and seven other trauma skills increased relative to FSTE. After adjusting for years of practice, number of trauma resuscitations performed per month and pre-deployment training, there remained a significant positive association between FSTE and confidence in damage control, thoracic surgery, extremity/junctional hemorrhage control, trauma systems administration, adult critical care and airway management. Training programs and years of general surgery practice do not replace FSTE among military surgeons. Pre-deployment training that mimics FST skill sets should be developed to improve military surgeon confidence and outcomes. Prognostic and Epidemiologic, Level IV.

Critical issues in sensor science to aid food and water safety.

PubMed

Farahi, R H; Passian, A; Tetard, L; Thundat, T

2012-06-26

The stability of food and water supplies is widely recognized as a global issue of fundamental importance. Sensor development for food and water safety by nonconventional assays continues to overcome technological challenges. The delicate balance between attaining adequate limits of detection, chemical fingerprinting of the target species, dealing with the complex food matrix, and operating in difficult environments are still the focus of current efforts. While the traditional pursuit of robust recognition methods remains important, emerging engineered nanomaterials and nanotechnology promise better sensor performance but also bring about new challenges. Both advanced receptor-based sensors and emerging non-receptor-based physical sensors are evaluated for their critical challenges toward out-of-laboratory applications.

Software Safety Progress in NASA

NASA Technical Reports Server (NTRS)

Radley, Charles F.

1995-01-01

NASA has developed guidelines for development and analysis of safety-critical software. These guidelines have been documented in a Guidebook for Safety Critical Software Development and Analysis. The guidelines represent a practical 'how to' approach, to assist software developers and safety analysts in cost effective methods for software safety. They provide guidance in the implementation of the recent NASA Software Safety Standard NSS-1740.13 which was released as 'Interim' version in June 1994, scheduled for formal adoption late 1995. This paper is a survey of the methods in general use, resulting in the NASA guidelines for safety critical software development and analysis.

A Comparison of Bus Architectures for Safety-Critical Embedded Systems

NASA Technical Reports Server (NTRS)

Rushby, John; Miner, Paul S. (Technical Monitor)

2003-01-01

We describe and compare the architectures of four fault-tolerant, safety-critical buses with a view to deducing principles common to all of them, the main differences in their design choices, and the tradeoffs made. Two of the buses come from an avionics heritage, and two from automobiles, though all four strive for similar levels of reliability and assurance. The avionics buses considered are the Honeywell SAFEbus (the backplane data bus used in the Boeing 777 Airplane Information Management System) and the NASA SPIDER (an architecture being developed as a demonstrator for certification under the new DO-254 guidelines); the automobile buses considered are the TTTech Time-Triggered Architecture (TTA), recently adopted by Audi for automobile applications, and by Honeywell for avionics and aircraft control functions, and FlexRay, which is being developed by a consortium of BMW, DaimlerChrysler, Motorola, and Philips.

Water Resistant Container Technical Basis Document for the TA-55 Criticality Safety Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Paul Herrick; Teague, Jonathan Gayle

Criticality safety at TA-55 relies on nuclear material containers that are water resistant to prevent significant amounts of water from coming into contact with fissile material in the event of a fire that causes a breach of glovevbox confinement and subsequent fire water ingress. A “water tight container” is a container that will not allow more than 50ml of water ingress when fully submerged, except when under sufficient pressure to produce structural discontinuity. There are many types of containers, welded containers, hermetically sealed containers, filtered containers, etc.

Patient safety event reporting in critical care: a study of three intensive care units.

PubMed

Harris, Carolyn B; Krauss, Melissa J; Coopersmith, Craig M; Avidan, Michael; Nast, Patricia A; Kollef, Marin H; Dunagan, W Claiborne; Fraser, Victoria J

2007-04-01

To increase patient safety event reporting in three intensive care units (ICUs) using a new voluntary card-based event reporting system and to compare and evaluate observed differences in reporting among healthcare workers across ICUs. Prospective, single-center, interventional study. A medical ICU (19 beds), surgical ICU (24 beds), and cardiothoracic ICU (17 beds) at a 1,371-bed urban teaching hospital. Adult patients admitted to these three study ICUs. Use of a new, internally designed, card-based reporting program to solicit voluntary anonymous reporting of medical errors and patient safety concerns. During a 14-month period, 714 patient safety events were reported using a new card-based reporting system, reflecting a significant increase in reporting compared with pre-intervention Web-based reporting (20.4 reported events/1,000 patient days pre-intervention to 41.7 reported events/1,000 patient days postintervention; rate ratio, 2.05; 95% confidence interval, 1.79-2.34). Nurses submitted the majority of reports (nurses, 67.1%; physicians, 23.1%; other reporters, 9.5%); however, physicians experienced the greatest increase in reporting among their group (physicians, 43-fold; nurses, 1.7-fold; other reporters, 4.3-fold) relative to pre-intervention rates. There were significant differences in the reporting of harm by job description: 31.1% of reports from nurses, 36.2% from other staff, and 17.0% from physicians described events that did not reach/affect the patient (p = .001); and 33.9% of reports from physicians, 27.2% from nurses, and 13.0% from other staff described events that caused harm (p = .005). Overall reported patient safety events per 1,000 patient days differed by ICU (medical ICU = 55.5, cardiothoracic ICU = 25.3, surgical ICU = 40.2; p < .001). This card-based reporting system increased reporting significantly compared with pre-intervention Web-based reporting and revealed significant differences in reporting by healthcare worker and ICU. These

Enhancing the Safety of Children in Foster Care and Family Support Programs: Automated Critical Incident Reporting

ERIC Educational Resources Information Center

Brenner, Eliot; Freundlich, Madelyn

2006-01-01

The Adoption and Safe Families Act of 1997 has made child safety an explicit focus in child welfare. The authors describe an automated critical incident reporting program designed for use in foster care and family-support programs. The program, which is based in Lotus Notes and uses e-mail to route incident reports from direct service staff to…

Critical review of the current literature on the safety of sucralose.

PubMed

Magnuson, Bernadene A; Roberts, Ashley; Nestmann, Earle R

2017-08-01

Sucralose is a non-caloric high intensity sweetener that is approved globally for use in foods and beverages. This review provides an updated summary of the literature addressing the safety of use of sucralose. Studies reviewed include chemical characterization and stability, toxicokinetics in animals and humans, assessment of genotoxicity, and animal and human feeding studies. Endpoints evaluated include effects on growth, development, reproduction, neurotoxicity, immunotoxicity, carcinogenicity and overall health status. Human clinical studies investigated potential effects of repeated consumption in individuals with diabetes. Recent studies on the safety of sucralose focused on carcinogenic potential and the effect of sucralose on the gut microflora are reviewed. Following the discovery of sweet taste receptors in the gut and studies investigating the activation of these receptors by sucralose lead to numerous human clinical studies assessing the effect of sucralose on overall glycemic control. Estimated daily intakes of sucralose in different population subgroups, including recent studies on children with special dietary needs, consistently find that the intakes of sucralose in all members of the population remain well below the acceptable daily intake. Collectively, critical review of the extensive database of research demonstrates that sucralose is safe for its intended use as a non-caloric sugar alternative. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Building effective critical care teams

PubMed Central

2011-01-01

Critical care is formulated and delivered by a team. Accordingly, behavioral scientific principles relevant to teams, namely psychological safety, transactive memory and leadership, apply to critical care teams. Two experts in behavioral sciences review the impact of psychological safety, transactive memory and leadership on medical team outcomes. A clinician then applies those principles to two routine critical care paradigms: daily rounds and resuscitations. Since critical care is a team endeavor, methods to maximize teamwork should be learned and mastered by critical care team members, and especially leaders. PMID:21884639

Use of Unified Modeling Language (UML) in Model-Based Development (MBD) For Safety-Critical Applications

DTIC Science & Technology

2014-12-01

appears that UML is becoming the de facto MBD language. OMG® states the following on the MDA® FAQ page: “Although not formally required [for MBD], UML...a known limitation [42], so UML users should plan accordingly, especially for safety-critical programs. For example, “models are not used to...description of the MBD tool chain can be produced. That description could be resident in a Plan for Software Aspects of Certification (PSAC) or Software

The State of Vaccine Confidence 2016: Global Insights Through a 67-Country Survey.

PubMed

Larson, Heidi J; de Figueiredo, Alexandre; Xiahong, Zhao; Schulz, William S; Verger, Pierre; Johnston, Iain G; Cook, Alex R; Jones, Nick S

2016-10-01

Public trust in immunization is an increasingly important global health issue. Losses in confidence in vaccines and immunization programmes can lead to vaccine reluctance and refusal, risking disease outbreaks and challenging immunization goals in high- and low-income settings. National and international immunization stakeholders have called for better monitoring of vaccine confidence to identify emerging concerns before they evolve into vaccine confidence crises. We perform a large-scale, data-driven study on worldwide attitudes to immunizations. This survey - which we believe represents the largest survey on confidence in immunization to date - examines perceptions of vaccine importance, safety, effectiveness, and religious compatibility among 65,819 individuals across 67 countries. Hierarchical models are employed to probe relationships between individual- and country-level socio-economic factors and vaccine attitudes obtained through the four-question, Likert-scale survey. Overall sentiment towards vaccinations is positive across all 67 countries, however there is wide variability between countries and across world regions. Vaccine-safety related sentiment is particularly negative in the European region, which has seven of the ten least confident countries, with 41% of respondents in France and 36% of respondents in Bosnia & Herzegovina reporting that they disagree that vaccines are safe (compared to a global average of 13%). The oldest age group (65+) and Roman Catholics (amongst all faiths surveyed) are associated with positive views on vaccine sentiment, while the Western Pacific region reported the highest level of religious incompatibility with vaccines. Countries with high levels of schooling and good access to health services are associated with lower rates of positive sentiment, pointing to an emerging inverse relationship between vaccine sentiments and socio-economic status. Regular monitoring of vaccine attitudes - coupled with monitoring of local

Reductions in invasive device use and care costs after institution of a daily safety checklist in a pediatric critical care unit.

PubMed

Tarrago, Rod; Nowak, Jeffrey E; Leonard, Christopher S; Payne, Nathaniel R

2014-06-01

In the critical care unit, complexity of care can contribute to both medical errors and increased costs, particularly when clinicians are forced to rely on memory. Checklists can be used to improve safety and reduce cost. A number of omission-related adverse events in 2010 prompted the development of a checklist to reduce the possibility of similar future events. The PICU Safety Checklist was implemented in the pediatric ICU (PICU) at Children's Hospitals and Clinics of Minnesota. During a 21-month period, the checklist was used to prompt the care team to address quality and safety items during rounds. The initial checklist was paper, with two subsequent versions being incorporated into the electronic medical record (EMR). The daily safety checklist was successfully implemented in the PICU. Work-flow improvements based on regular multidisciplinary feedback led to more consistent use of the checklist. Improvements on all quality and safety metrics were identified, including invasive device use, medication costs, antibiotic and laboratory test use, and compliance with standards of care. Staff satisfaction rates were > 80% for safety, communication, and collaboration. By using a daily safety checklist in the pediatric critical care unit, we improved quality and safety, as well as the collaborative culture among all clinicians. Incorporating the checklist into the EMR improved compliance and accountability, ensuring its application to all patients. Clinicians now often individually address many checklist items outside the formal rounding process, indicating that the checklist content has become part of their usual practice. A successful implementation showing tangible clinical improvements can lead to interest and adoption in other clinical areas within the institution.

Family presence during resuscitation in a paediatric hospital: health professionals' confidence and perceptions.

PubMed

McLean, Julie; Gill, Fenella J; Shields, Linda

2016-04-01

To investigate medical and nursing staff's perceptions of and self-confidence in facilitating family presence during resuscitation in a paediatric hospital setting. Family presence during resuscitation is the attendance of family members in a location that affords visual or physical contact with the patient during resuscitation. Providing the opportunity for families to be present during resuscitation embraces the family-centred care philosophy which underpins paediatric care. Having families present continues to spark much debate amongst health care professionals. A descriptive cross-sectional randomised survey using the 'Family Presence Risk/Benefit Scale' and the 'Family Presence Self-Confidence Scale 'to assess health care professionals' (doctors and nurses) perceptions and self-confidence in facilitating family presence during resuscitation of a child in a paediatric hospital. Surveys were distributed to 300 randomly selected medical and nursing staff. Descriptive and inferential statistics were used to compare medical and nursing, and critical and noncritical care perceptions and self-confidence. Critical care staff had statistically significant higher risk/benefit scores and higher self-confidence scores than those working in noncritical care areas. Having experience in paediatric resuscitation, having invited families to be present previously and a greater number of years working in paediatrics significantly affected participants' perceptions and self-confidence. There was no difference between medical and nursing mean scores for either scale. Both medical and nursing staff working in the paediatric setting understood the needs of families and the philosophy of family-centred care is a model of care practised across disciplines. This has implications both for implementing guidelines to support family presence during resuscitation and for education strategies to shift the attitudes of staff who have limited or no experience. © 2016 John Wiley & Sons Ltd.

Responsibility and confidence

PubMed Central

Austin, Zubin

2013-01-01

Background: Despite the changing role of the pharmacist in patient-centred practice, pharmacists anecdotally reported little confidence in their clinical decision-making skills and do not feel responsible for their patients. Observational findings have suggested these trends within the profession, but there is a paucity of evidence to explain why. We conducted an exploratory study with an objective to identify reasons for the lack of responsibility and/or confidence in various pharmacy practice settings. Methods: Pharmacist interviews were conducted via written response, face-to-face or telephone. Seven questions were asked on the topic of responsibility and confidence as it applies to pharmacy practice and how pharmacists think these themes differ in medicine. Interview transcripts were analyzed and divided by common theme. Quotations to support these themes are presented. Results: Twenty-nine pharmacists were asked to participate, and 18 responded (62% response rate). From these interviews, 6 themes were identified as barriers to confidence and responsibility: hierarchy of the medical system, role definitions, evolution of responsibility, ownership of decisions for confidence building, quality and consequences of mentorship and personality traits upon admission. Discussion: We identified 6 potential barriers to the development of pharmacists’ self-confidence and responsibility. These findings have practical applicability for educational research, future curriculum changes, experiential learning structure and pharmacy practice. Due to bias and the limitations of this form of exploratory research and small sample size, evidence should be interpreted cautiously. Conclusion: Pharmacists feel neither responsible nor confident for their clinical decisions due to social, educational, experiential and personal reasons. Can Pharm J 2013;146:155-161. PMID:23795200

NASA Software Safety Standard

NASA Technical Reports Server (NTRS)

Rosenberg, Linda

1997-01-01

If software is a critical element in a safety critical system, it is imperative to implement a systematic approach to software safety as an integral part of the overall system safety programs. The NASA-STD-8719.13A, "NASA Software Safety Standard", describes the activities necessary to ensure that safety is designed into software that is acquired or developed by NASA, and that safety is maintained throughout the software life cycle. A PDF version, is available on the WWW from Lewis. A Guidebook that will assist in the implementation of the requirements in the Safety Standard is under development at the Lewis Research Center (LeRC). After completion, it will also be available on the WWW from Lewis.

OECD/NEA expert group on uncertainty analysis for criticality safety assessment: Results of benchmark on sensitivity calculation (phase III)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ivanova, T.; Laville, C.; Dyrda, J.

2012-07-01

The sensitivities of the k{sub eff} eigenvalue to neutron cross sections have become commonly used in similarity studies and as part of the validation algorithm for criticality safety assessments. To test calculations of the sensitivity coefficients, a benchmark study (Phase III) has been established by the OECD-NEA/WPNCS/EG UACSA (Expert Group on Uncertainty Analysis for Criticality Safety Assessment). This paper presents some sensitivity results generated by the benchmark participants using various computational tools based upon different computational methods: SCALE/TSUNAMI-3D and -1D, MONK, APOLLO2-MORET 5, DRAGON-SUSD3D and MMKKENO. The study demonstrates the performance of the tools. It also illustrates how model simplificationsmore » impact the sensitivity results and demonstrates the importance of 'implicit' (self-shielding) sensitivities. This work has been a useful step towards verification of the existing and developed sensitivity analysis methods. (authors)« less

Mission and Safety Critical (MASC): An EVACS simulation with nested transactions

NASA Technical Reports Server (NTRS)

Auty, David; Atkinson, Colin; Randall, Charlie

1992-01-01

The Extra-Vehicular Activity Control System (EVACS) Simulation with Nested Transactions, a recent effort of the MISSION Kernel Team, is documented. The EVACS simulation is a simulation of some aspects of the Extra-Vehicular Activity Control System, in particular, just the selection of communication frequencies. The simulation is a tool to explore mission and safety critical (MASC) applications. For the purpose of this effort, its current definition is quite narrow serving only as a starting point for prototyping purposes. (Note that EVACS itself has been supplanted in a larger scenario of a lunar outpost with astronauts and a lunar rover). The frequency selection scenario was modified to embed its processing in nested transactions. Again as a first step, only two aspects of transaction support were implemented in this prototype: architecture and state recovery. Issues of concurrency and distribution are yet to be addressed.

NASA's Software Safety Standard

NASA Technical Reports Server (NTRS)

Ramsay, Christopher M.

2005-01-01

NASA (National Aeronautics and Space Administration) relies more and more on software to control, monitor, and verify its safety critical systems, facilities and operations. Since the 1960's there has hardly been a spacecraft (manned or unmanned) launched that did not have a computer on board that provided vital command and control services. Despite this growing dependence on software control and monitoring, there has been no consistent application of software safety practices and methodology to NASA's projects with safety critical software. Led by the NASA Headquarters Office of Safety and Mission Assurance, the NASA Software Safety Standard (STD-18l9.13B) has recently undergone a significant update in an attempt to provide that consistency. This paper will discuss the key features of the new NASA Software Safety Standard. It will start with a brief history of the use and development of software in safety critical applications at NASA. It will then give a brief overview of the NASA Software Working Group and the approach it took to revise the software engineering process across the Agency.

We will be champions: Leaders' confidence in 'us' inspires team members' team confidence and performance.

PubMed

Fransen, K; Steffens, N K; Haslam, S A; Vanbeselaere, N; Vande Broek, G; Boen, F

2016-12-01

The present research examines the impact of leaders' confidence in their team on the team confidence and performance of their teammates. In an experiment involving newly assembled soccer teams, we manipulated the team confidence expressed by the team leader (high vs neutral vs low) and assessed team members' responses and performance as they unfolded during a competition (i.e., in a first baseline session and a second test session). Our findings pointed to team confidence contagion such that when the leader had expressed high (rather than neutral or low) team confidence, team members perceived their team to be more efficacious and were more confident in the team's ability to win. Moreover, leaders' team confidence affected individual and team performance such that teams led by a highly confident leader performed better than those led by a less confident leader. Finally, the results supported a hypothesized mediational model in showing that the effect of leaders' confidence on team members' team confidence and performance was mediated by the leader's perceived identity leadership and members' team identification. In conclusion, the findings of this experiment suggest that leaders' team confidence can enhance members' team confidence and performance by fostering members' identification with the team. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Nuclear criticality safety calculational analysis for small-diameter containers

DOE Office of Scientific and Technical Information (OSTI.GOV)

LeTellier, M.S.; Smallwood, D.J.; Henkel, J.A.

This report documents calculations performed to establish a technical basis for the nuclear criticality safety of favorable geometry containers, sometimes referred to as 5-inch containers, in use at the Portsmouth Gaseous Diffusion Plant. A list of containers currently used in the plant is shown in Table 1.0-1. These containers are currently used throughout the plant with no mass limits. The use of containers with geometries or material types other than those addressed in this evaluation must be bounded by this analysis or have an additional analysis performed. The following five basic container geometries were modeled and bound all container geometriesmore » in Table 1.0-1: (1) 4.32-inch-diameter by 50-inch-high polyethylene bottle; (2) 5.0-inch-diameter by 24-inch-high polyethylene bottle; (3) 5.25-inch-diameter by 24-inch-high steel can ({open_quotes}F-can{close_quotes}); (4) 5.25-inch-diameter by 15-inch-high steel can ({open_quotes}Z-can{close_quotes}); and (5) 5.0-inch-diameter by 9-inch-high polybottle ({open_quotes}CO-4{close_quotes}). Each container type is evaluated using five basic reflection and interaction models that include single containers and multiple containers in normal and in credible abnormal conditions. The uranium materials evaluated are UO{sub 2}F{sub 2}+H{sub 2}O and UF{sub 4}+oil materials at 100% and 10% enrichments and U{sub 3}O{sub 8}, and H{sub 2}O at 100% enrichment. The design basis safe criticality limit for the Portsmouth facility is k{sub eff} + 2{sigma} < 0.95. The KENO study results may be used as the basis for evaluating general use of these containers in the plant.« less

10 CFR 70.62 - Safety program and integrated safety analysis.

Code of Federal Regulations, 2013 CFR

2013-01-01

...; (iv) Potential accident sequences caused by process deviations or other events internal to the... of occurrence of each potential accident sequence identified pursuant to paragraph (c)(1)(iv) of this... have experience in nuclear criticality safety, radiation safety, fire safety, and chemical process...

10 CFR 70.62 - Safety program and integrated safety analysis.

Code of Federal Regulations, 2014 CFR

2014-01-01

...; (iv) Potential accident sequences caused by process deviations or other events internal to the... of occurrence of each potential accident sequence identified pursuant to paragraph (c)(1)(iv) of this... have experience in nuclear criticality safety, radiation safety, fire safety, and chemical process...

10 CFR 70.62 - Safety program and integrated safety analysis.

Code of Federal Regulations, 2012 CFR

2012-01-01

...; (iv) Potential accident sequences caused by process deviations or other events internal to the... of occurrence of each potential accident sequence identified pursuant to paragraph (c)(1)(iv) of this... have experience in nuclear criticality safety, radiation safety, fire safety, and chemical process...

Cannabis for therapeutic purposes and public health and safety: a systematic and critical review.

PubMed

Sznitman, Sharon R; Zolotov, Yuval

2015-01-01

The use of Cannabis for Therapeutic Purposes (CTP) has recently become legal in many places. These policy and legal modifications may be related to changes in cannabis perceptions, availability and use and in the way cannabis is grown and sold. This may in turn have effects on public health and safety. To better understand the potential effects of CTP legalization on public health and safety, the current paper synthesizes and critically discusses the relevant literature. Twenty-eight studies were identified by a comprehensive search strategy, and their characteristics and main findings were systematically reviewed according to the following content themes: CTP and illegal cannabis use; CTP and other public health issues; CTP, crime and neighbourhood disadvantage. The research field is currently limited by a lack of theoretical and methodological rigorous studies. The review shows that the most prevalent theme of investigation so far has been the relation between CTP and illegal cannabis use. In addition, the literature review shows that there is an absence of evidence to support many common concerns related to detrimental public health and safety effects of CTP legalization. Although lack of evidence provides some reassurance that CTP legalization may not have posed a substantial threat to public health and safety, this conclusion needs to be examined in light of the limitations of studies conducted so far. Furthermore, as CTP policy continues to evolve, including incorporation of greater commercialization, it is possible that the full effects of CTP legalization have yet to take place. Ensuring study quality will allow future research to better investigate the complex role that CTP plays in relation to society at large, and public health and safety in particular. Copyright © 2014 Elsevier B.V. All rights reserved.

Development of Professional Confidence in Health Education: Research Evidence of the Impact of Guided Practice into the Profession

ERIC Educational Resources Information Center

Hecimovich, Mark; Volet, Simone

2011-01-01

Purpose: The purpose of this paper is to review critically the published research investigating how guided practice into the profession contributes to increased professional confidence in health care students, with a view to identifying its impact on the development of professional confidence. Design/methodology/approach: A literature search was…

Regenerative braking strategies, vehicle safety and stability control systems: critical use-case proposals

NASA Astrophysics Data System (ADS)

Oleksowicz, Selim A.; Burnham, Keith J.; Southgate, Adam; McCoy, Chris; Waite, Gary; Hardwick, Graham; Harrington, Cian; McMurran, Ross

2013-05-01

The sustainable development of vehicle propulsion systems that have mainly focused on reduction of fuel consumption (i.e. CO2 emission) has led, not only to the development of systems connected with combustion processes but also to legislation and testing procedures. In recent years, the low carbon policy has made hybrid vehicles and fully electric vehicles (H/EVs) popular. The main virtue of these propulsion systems is their ability to restore some of the expended energy from kinetic movement, e.g. the braking process. Consequently new research and testing methods for H/EVs are currently being developed. This especially concerns the critical 'use-cases' for functionality tests within dynamic events for both virtual simulations, as well as real-time road tests. The use-case for conventional vehicles for numerical simulations and road tests are well established. However, the wide variety of tests and their great number (close to a thousand) creates a need for selection, in the first place, and the creation of critical use-cases suitable for testing H/EVs in both virtual and real-world environments. It is known that a marginal improvement in the regenerative braking ratio can significantly improve the vehicle range and, therefore, the economic cost of its operation. In modern vehicles, vehicle dynamics control systems play the principal role in safety, comfort and economic operation. Unfortunately, however, the existing standard road test scenarios are insufficient for H/EVs. Sector knowledge suggests that there are currently no agreed tests scenarios to fully investigate the effects of brake blending between conventional and regenerative braking as well as the regenerative braking interaction with active driving safety systems (ADSS). The paper presents seven manoeuvres, which are considered to be suitable and highly informative for the development and examination of H/EVs with regenerative braking capability. The critical manoeuvres presented are considered to be

Perceptions of the use of critical thinking teaching methods.

PubMed

Kowalczyk, Nina; Hackworth, Ruth; Case-Smith, Jane

2012-01-01

To identify the perceived level of competence in teaching and assessing critical thinking skills and the difficulties facing radiologic science program directors in implementing student-centered teaching methods. A total of 692 program directors received an invitation to complete an electronic survey soliciting information regarding the importance of critical thinking skills, their confidence in applying teaching methods and assessing student performance, and perceived obstacles. Statistical analysis included descriptive data, correlation coefficients, and ANOVA. Responses were received from 317 participants indicating program directors perceive critical thinking to be an essential element in the education of the student; however, they identified several areas for improvement. A high correlation was identified between the program directors' perceived level of skill and their confidence in critical thinking, and between their perceived level of skill and ability to assess the students' critical thinking. Key barriers to implementing critical thinking teaching strategies were identified. Program directors value the importance of implementing critical thinking teaching methods and perceive a need for professional development in critical thinking educational methods. Regardless of the type of educational institution in which the academic program is located, the level of education held by the program director was a significant factor regarding perceived confidence in the ability to model critical thinking skills and the ability to assess student critical thinking skills.

Safety and efficacy of cell-based therapy on critical limb ischemia: A meta-analysis.

PubMed

Ai, Min; Yan, Chang-Fu; Xia, Fu-Chun; Zhou, Shuang-Lu; He, Jian; Li, Cui-Ping

2016-06-01

Critical limb ischemia (CLI) is a major health problem worldwide, affecting approximately 500-1000 people per million per annum. Cell-based therapy has given new hope for the treatment of limb ischemia. This study assessed the safety and efficacy of cellular therapy CLI treatment. We searched the PubMed, Embase and Cochrane databases through October 20, 2015, and selected the controlled trials with cell-based therapy for CLI treatment compared with cell-free treatment. We assessed the results by meta-analysis using a variety of outcome measures, as well as the association of mononuclear cell dosage with treatment effect by dose-response meta-analysis. Twenty-five trials were included. For the primary evaluation index, cell-based therapy significantly reduced the rate of major amputation (odds ratio [OR] 0.44, 95% confidence interval [CI] 0.32-0.60, P = 0.000) and significantly increased the rate of amputation-free survival (OR 2.80, 95% CI 1.70-4.61, P = 0.000). Trial sequence analysis indicated that optimal sample size (n = 3374) is needed to detect a plausible treatment effect in all-cause mortality. Cell-based therapy significantly improves ankle brachial index, increases the rate of ulcer healing, increases the transcutaneous pressure of oxygen, reduces limb pain and improves movement ability. Subgroup analysis indicated heterogeneity is caused by type of control, design bias and transplant route. In the dose-response analysis, there was no significant correlation between cell dosage and the therapeutic effect. Cell-based therapy has a significant therapeutic effect on CLI, but randomized double-blind placebo-controlled trials are needed to improve the credibility of this conclusion. Assessment of all-cause mortality also requires a larger sample size to arrive at a strong conclusion. In dose-response analysis, increasing the dosage of cell injections does not significantly improve the therapeutic effects of cell-based therapy. Copyright © 2016

Resilience Engineering in Critical Long Term Aerospace Software Systems: A New Approach to Spacecraft Software Safety

NASA Astrophysics Data System (ADS)

Dulo, D. A.

Safety critical software systems permeate spacecraft, and in a long term venture like a starship would be pervasive in every system of the spacecraft. Yet software failure today continues to plague both the systems and the organizations that develop them resulting in the loss of life, time, money, and valuable system platforms. A starship cannot afford this type of software failure in long journeys away from home. A single software failure could have catastrophic results for the spaceship and the crew onboard. This paper will offer a new approach to developing safe reliable software systems through focusing not on the traditional safety/reliability engineering paradigms but rather by focusing on a new paradigm: Resilience and Failure Obviation Engineering. The foremost objective of this approach is the obviation of failure, coupled with the ability of a software system to prevent or adapt to complex changing conditions in real time as a safety valve should failure occur to ensure safe system continuity. Through this approach, safety is ensured through foresight to anticipate failure and to adapt to risk in real time before failure occurs. In a starship, this type of software engineering is vital. Through software developed in a resilient manner, a starship would have reduced or eliminated software failure, and would have the ability to rapidly adapt should a software system become unstable or unsafe. As a result, long term software safety, reliability, and resilience would be present for a successful long term starship mission.

Critical Drivers for Safety Culture: Examining Department of Energy and U.S. Army Operational Experiences - 12382

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lowes, Elizabeth A.

2012-07-01

Evaluating operational incidents can provide a window into the drivers most critical to establishing and maintaining a strong safety culture, thereby minimizing the potential project risk associated with safety incidents. By examining U.S. Department of Energy (DOE) versus U.S. Army drivers in terms of regulatory and contract requirements, programs implemented to address the requirements, and example case studies of operational events, a view of the elements most critical to making a positive influence on safety culture is presented. Four case studies are used in this evaluation; two from DOE and two from U.S. Army experiences. Although the standards guiding operationsmore » at these facilities are different, there are many similarities in the level of hazards, as well as the causes and the potential consequences of the events presented. Two of the incidents examined, one from a DOE operation and the other from a U.S. Army facility, resulted in workers receiving chemical burns. The remaining two incidents are similar in that significant conduct of operations failures occurred resulting in high-level radioactive waste (in the case of the DOE facility) or chemical agent (in the case of the Army facility) being transferred outside of engineering controls. A review of the investigation reports for all four events indicates the primary causes to be failures in work planning leading to ineffective hazard evaluation and control, lack of procedure adherence, and most importantly, lack of management oversight to effectively reinforce expectations for safe work planning and execution. DOE and Army safety programs are similar, and although there are some differences in contractual requirements, the expectations for safe performance are essentially the same. This analysis concludes that instilling a positive safety culture comes down to management leadership and engagement to (1) cultivate an environment that values a questioning attitude and (2) continually reinforce

Two-Dimensional, Implicit Confidence Tests as a Tool for Recognizing Student Misconceptions

ERIC Educational Resources Information Center

Klymkowsky, Michael W.; Taylor, Linda B.; Spindler, Shana R.; Garvin-Doxas, R. Kathy

2006-01-01

The misconceptions that students bring with them, or that arise during instruction, are a critical barrier to learning. Implicit-confidence tests, a simple modification of the multiple-choice test, can be used as a strategy for recognizing student misconceptions. An important issue, however, is whether such tests are gender-neutral. We analyzed…

Relations among affect, abstinence motivation and confidence, and daily smoking lapse risk.

PubMed

Minami, Haruka; Yeh, Vivian M; Bold, Krysten W; Chapman, Gretchen B; McCarthy, Danielle E

2014-06-01

This study tested the hypothesis that changes in momentary affect, abstinence motivation, and confidence would predict lapse risk over the next 12-24 hr using Ecological Momentary Assessment (EMA) data from smokers attempting to quit smoking. One hundred and three adult, daily, treatment-seeking smokers recorded their momentary affect, motivation to quit, abstinence confidence, and smoking behaviors in near real time with multiple EMA reports per day using electronic diaries postquit. Multilevel models indicated that initial levels of negative affect were associated with smoking, even after controlling for earlier smoking status, and that short-term increases in negative affect predicted lapses up to 12, but not 24, hr later. Positive affect had significant effects on subsequent abstinence confidence, but not motivation to quit. High levels of motivation appeared to reduce increases in lapse risk that occur over hours although momentary changes in confidence did not predict lapse risk over 12 hr. Negative affect had short-lived effects on lapse risk, whereas higher levels of motivation protected against the risk of lapsing that accumulates over hours. An increase in positive affect was associated with greater confidence to quit, but such changes in confidence did not reduce short-term lapse risk, contrary to expectations. Relations observed among affect, cognitions, and lapse seem to depend critically on the timing of assessments.

Relations among Affect, Abstinence Motivation and Confidence, and Daily Smoking Lapse Risk

PubMed Central

Minami, Haruka; Yeh, Vivian M.; Bold, Krysten W.; Chapman, Gretchen B.; McCarthy, Danielle E.

2016-01-01

Aims This study tested the hypothesis that changes in momentary affect, abstinence motivation, and confidence would predict lapse risk over the next 12–24 hours using Ecological Momentary Assessment (EMA) data from smokers attempting to quit smoking. Method 103 adult, daily, treatment-seeking smokers recorded their momentary affect, motivation to quit, abstinence confidence, and smoking behaviors in near real time with multiple EMA reports per day using electronic diaries post-quit. Results Multilevel models indicated that initial levels of negative affect were associated with smoking, even after controlling for earlier smoking status, and that short-term increases in negative affect predicted lapses up to 12, but not 24, hours later. Positive affect had significant effects on subsequent abstinence confidence, but not motivation to quit. High levels of motivation appeared to reduce increases in lapse risk that occur over hours while momentary changes in confidence did not predict lapse risk over 12 hours. Conclusion Negative affect had short-lived effects on lapse risk, whereas higher levels of motivation protected against the risk of lapsing that accumulates over hours. An increase in positive affect was associated with greater confidence to quit, but such changes in confidence did not reduce short-term lapse risk, contrary to expectations. Relations observed among affect, cognitions, and lapse seem to depend critically on the timing of assessments. PMID:24955665

Probabilistic confidence for decisions based on uncertain reliability estimates

NASA Astrophysics Data System (ADS)

Reid, Stuart G.

2013-05-01

Reliability assessments are commonly carried out to provide a rational basis for risk-informed decisions concerning the design or maintenance of engineering systems and structures. However, calculated reliabilities and associated probabilities of failure often have significant uncertainties associated with the possible estimation errors relative to the 'true' failure probabilities. For uncertain probabilities of failure, a measure of 'probabilistic confidence' has been proposed to reflect the concern that uncertainty about the true probability of failure could result in a system or structure that is unsafe and could subsequently fail. The paper describes how the concept of probabilistic confidence can be applied to evaluate and appropriately limit the probabilities of failure attributable to particular uncertainties such as design errors that may critically affect the dependability of risk-acceptance decisions. This approach is illustrated with regard to the dependability of structural design processes based on prototype testing with uncertainties attributable to sampling variability.

Use of failure mode, effect and criticality analysis to improve safety in the medication administration process.

PubMed

Rodriguez-Gonzalez, Carmen Guadalupe; Martin-Barbero, Maria Luisa; Herranz-Alonso, Ana; Durango-Limarquez, Maria Isabel; Hernandez-Sampelayo, Paloma; Sanjurjo-Saez, Maria

2015-08-01

To critically evaluate the causes of preventable adverse drug events during the nurse medication administration process in inpatient units with computerized prescription order entry and profiled automated dispensing cabinets in order to prioritize interventions that need to be implemented and to evaluate the impact of specific interventions on the criticality index. This is a failure mode, effects and criticality analysis (FMECA) study. A multidisciplinary consensus committee composed of pharmacists, nurses and doctors evaluated the process of administering medications in a hospital setting in Spain. By analysing the process, all failure modes were identified and criticality was determined by rating severity, frequency and likelihood of failure detection on a scale of 1 to 10, using adapted versions of already published scales. Safety strategies were identified and prioritized. Through consensus, the committee identified eight processes and 40 failure modes, of which 20 were classified as high risk. The sum of the criticality indices was 5254. For the potential high-risk failure modes, 21 different potential causes were found resulting in 24 recommendations. Thirteen recommendations were prioritized and developed over a 24-month period, reducing total criticality from 5254 to 3572 (a 32.0% reduction). The recommendations with a greater impact on criticality were the development of an electronic medication administration record (-582) and the standardization of intravenous drug compounding in the unit (-168). Other improvements, such as barcode medication administration technology (-1033), were scheduled for a longer period of time because of lower feasibility. FMECA is a useful approach that can improve the medication administration process. © 2015 John Wiley & Sons, Ltd.

Safety and efficacy of autologous cell therapy in critical limb ischemia: a systematic review.

PubMed

Benoit, Eric; O'Donnell, Thomas F; Patel, Amit N

2013-01-01

Researchers have accumulated a decade of experience with autologous cell therapy in the treatment of critical limb ischemia (CLI). We conducted a systematic review of clinical trials in the literature to determine the safety and efficacy of cell therapy in CLI. We searched the literature for clinical trials of autologous cell therapy in CLI, including observational series of five or more patients to accrue a large pool of patients for safety analysis. Safety analysis included evaluation of death, cancer, unregulated angiogenesis, and procedural adverse events such as bleeding. Efficacy analysis included the clinical endpoints amputation and death as well as functional and surrogate endpoints. We identified 45 clinical trials, including seven RCTs, and 1,272 patients who received cell therapy. The overall adverse event rate was low (4.2%). Cell therapy patients did not have a higher mortality rate than control patients and demonstrated no increase in cancer incidence when analyzed against population rates. With regard to efficacy, cell therapy patients had a significantly lower amputation rate than control patients (OR 0.36, p = 0.0004). Cell therapy also demonstrated efficacy in a variety of functional and surrogate outcomes. Clinical trials differed in the proportion of patients with risk factors for clinical outcomes, and these influenced rates of amputation and death. Cell therapy presents a favorable safety profile with a low adverse event rate and no increase in severe events such as mortality and cancer and treatment with cell therapy decreases the risk of amputation. Cell therapy has a positive benefit-to-risk ratio in CLI and may be a valuable treatment option, particularly for those challenging patients who cannot undergo arterial reconstruction.

Criticality Safety Evaluation for Small Sample Preparation and Non-Destructive Assay (NDA) Operations in Wing 7 Basement of the CMR Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kunkle, Paige Elizabeth; Zhang, Ning

Nuclear Criticality Safety (NCS) has reviewed the fissionable material small sample preparation and NDA operations in Wing 7 Basement of the CMR Facility. This is a Level-1 evaluation conducted in accordance with NCS-AP-004 [Reference 1], formerly NCS-GUIDE-01, and the guidance set forth on use of the Standard Criticality Safety Requirements (SCSRs) [Reference 2]. As stated in Reference 2, the criticality safety evaluation consists of both the SCSR CSED and the SCSR Application CSED. The SCSR CSED is a Level-3 CSED [Reference 3]. This Level-1 CSED is the SCSR Application CSED. This SCSR Application (Level-1) evaluation does not derive controls, itmore » simply applies controls derived from the SCSR CSED (Level-3) for the application of operations conducted here. The controls derived in the SCSR CSED (Level-3) were evaluated via the process described in Section 6.6.5 of SD-130 (also reproduced in Section 4.3.5 of NCS-AP-004 [Reference 1]) and were determined to not meet the requirements for consideration of elevation into the safety basis documentation for CMR. According to the guidance set forth on use of the SCSRs [Reference 2], the SCSR CSED (Level-3) is also applicable to the CMR Facility because the process and the normal and credible abnormal conditions in question are bounded by those that are described in the SCSR CSED. The controls derived in the SCSR CSED include allowances for solid materials and solution operations. Based on the operations conducted at this location, there are less-than-accountable (LTA) amounts of 233U. Based on the evaluation documented herein, the normal and credible abnormal conditions that might arise during the execution of this process will remain subcritical with the following recommended controls.« less

Quantifying Safety Margin Using the Risk-Informed Safety Margin Characterization (RISMC)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grabaskas, David; Bucknor, Matthew; Brunett, Acacia

2015-04-26

The Risk-Informed Safety Margin Characterization (RISMC), developed by Idaho National Laboratory as part of the Light-Water Reactor Sustainability Project, utilizes a probabilistic safety margin comparison between a load and capacity distribution, rather than a deterministic comparison between two values, as is usually done in best-estimate plus uncertainty analyses. The goal is to determine the failure probability, or in other words, the probability of the system load equaling or exceeding the system capacity. While this method has been used in pilot studies, there has been little work conducted investigating the statistical significance of the resulting failure probability. In particular, it ismore » difficult to determine how many simulations are necessary to properly characterize the failure probability. This work uses classical (frequentist) statistics and confidence intervals to examine the impact in statistical accuracy when the number of simulations is varied. Two methods are proposed to establish confidence intervals related to the failure probability established using a RISMC analysis. The confidence interval provides information about the statistical accuracy of the method utilized to explore the uncertainty space, and offers a quantitative method to gauge the increase in statistical accuracy due to performing additional simulations.« less

Y-12 PLANT NUCLEAR SAFETY HANDBOOK

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wachter, J.W. ed.; Bailey, M.L.; Cagle, T.J.

1963-03-27

Information needed to solve nuclear safety problems is condensed into a reference book for use by persons familiar with the field. Included are a glossary of terms; useful tables; nuclear constants; criticality calculations; basic nuclear safety limits; solution geometries and critical values; metal critical values; criticality values for intermediate, heterogeneous, and interacting systems; miscellaneous and related information; and report number, author, and subject indexes. (C.H.)

Managing Risk in Safety Critical Operations - Lessons Learned from Space Operations

NASA Technical Reports Server (NTRS)

Gonzalez, Steven A.

2002-01-01

The Mission Control Center (MCC) at Johnson Space Center (JSC) has a rich legacy of supporting Human Space Flight operations throughout the Apollo, Shuttle and International Space Station eras. Through the evolution of ground operations and the Mission Control Center facility, NASA has gained a wealth of experience of what it takes to manage the risk in Safety Critical Operations, especially when human life is at risk. The focus of the presentation will be on the processes (training, operational rigor, team dynamics) that enable the JSC/MCC team to be so successful. The presentation will also share the evolution of the Mission Control Center architecture and how the evolution was introduced while managing the risk to the programs supported by the team. The details of the MCC architecture (e.g., the specific software, hardware or tools used in the facility) will not be shared at the conference since it would not give any additional insight as to how risk is managed in Space Operations.

Bounding criticality safety analyses for shipments of unconfigured spent nuclear fuel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lichtenwalter, J.J.; Parks, C.V.

1998-06-01

In November 1996, a request was made to the US Department of Energy for a waiver for three shipments of spent nuclear fuel (SNF) from Oak Ridge National Laboratory (ORNL) to the Savannah River Site (SRS) in the US NRC certified BMI-1 cask (CoC 5957). Although the post-irradiation fissile mass (based on chemical assays) in each shipment was less than 800 g, a criticality safety analysis was needed because the pre-irradiation mass exceeded 800 g, the fissile material limit in the CoC. The analyses were performed on SNF consisting of aluminum-clad U{sub 3}O{sub 8}, UAl{sub x}, and U{sub 3}Si{sub 2}more » plates, fragments and pieces that had been irradiated at ORNL during the Reduced Enrichment Research and Test Reactor Program of the 1980s. The highlights of the approach used to analyze this unique SNF and the benefits of the waiver are presented in this paper.« less

Protection and Safety.

ERIC Educational Resources Information Center

American School Board Journal, 1964

1964-01-01

Several aspects of school safety and protection are presented for school administrators and architects. Among those topics discussed are--(1) life safety, (2) vandalism controlled through proper design, (3) personal protective devices, and (4) fire alarm systems. Another critical factor in providing a complete school safety program is proper…

Epistemic Questions and Answers for Software System Safety

NASA Technical Reports Server (NTRS)

Holloway, C. M.; Johnson, Chris W.

2010-01-01

System safety is primarily concerned with epistemic questions, that is, questions concerning knowledge and the degree of confidence that can be placed in that knowledge. For systems with which human experience is long, such as roads, bridges, and mechanical devices, knowledge about what is required to make the systems safe is deep and detailed. High confidence can be placed in the validity of that knowledge. For other systems, however, with which human experience is comparatively short, such as those that rely in part or in whole on software, knowledge about what is required to ensure safety tends to be shallow and general. The confidence that can be placed in the validity of that knowledge is consequently low. In a previous paper, we enumerated a collection of foundational epistemic questions concerning software system safety. In this paper, we review and refine the questions, discuss some difficulties that attend to answering the questions today, and speculate on possible research to improve the situation.

The idiosyncratic nature of confidence

PubMed Central

Navajas, Joaquin; Hindocha, Chandni; Foda, Hebah; Keramati, Mehdi; Latham, Peter E; Bahrami, Bahador

2017-01-01

Confidence is the ‘feeling of knowing’ that accompanies decision making. Bayesian theory proposes that confidence is a function solely of the perceived probability of being correct. Empirical research has suggested, however, that different individuals may perform different computations to estimate confidence from uncertain evidence. To test this hypothesis, we collected confidence reports in a task where subjects made categorical decisions about the mean of a sequence. We found that for most individuals, confidence did indeed reflect the perceived probability of being correct. However, in approximately half of them, confidence also reflected a different probabilistic quantity: the perceived uncertainty in the estimated variable. We found that the contribution of both quantities was stable over weeks. We also observed that the influence of the perceived probability of being correct was stable across two tasks, one perceptual and one cognitive. Overall, our findings provide a computational interpretation of individual differences in human confidence. PMID:29152591

Submersion criticality safety of tungsten-rhenium urania cermet fuel for space propulsion and power applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

A.E. Craft; R. C. O'Brien; S. D. Howe

Nuclear thermal rockets are the preferred propulsion technology for a manned mission to Mars, and tungsten–uranium oxide cermet fuels could provide significant performance and cost advantages for nuclear thermal rockets. A nuclear reactor intended for use in space must remain subcritical before and during launch, and must remain subcritical in launch abort scenarios where the reactor falls back to Earth and becomes submerged in terrestrial materials (including seawater, wet sand, or dry sand). Submersion increases reflection of neutrons and also thermalizes the neutron spectrum, which typically increases the reactivity of the core. This effect is typically very significant for compact,more » fast-spectrum reactors. This paper provides a submersion criticality safety analysis for a representative tungsten/uranium oxide fueled reactor with a range of fuel compositions. Each submersion case considers both the rhenium content in the matrix alloy and the uranium oxide volume fraction in the cermet. The inclusion of rhenium significantly improves the submersion criticality safety of the reactor. While increased uranium oxide content increases the reactivity of the core, it does not significantly affect the submersion behavior of the reactor. There is no significant difference in submersion behavior between reactors with rhenium distributed within the cermet matrix and reactors with a rhenium clad in the coolant channels. The combination of the flooding of the coolant channels in submersion scenarios and the presence of a significant amount of spectral shift absorbers (i.e. high rhenium concentration) further decreases reactivity for short reactor cores compared to longer cores.« less

Senior internal medicine residents' confidence with essential topics in evidence-based medicine taught during internship.

PubMed

Keddis, Mira T; Beckman, Thomas J; Cullen, Michael W; Reed, Darcy A; Halvorsen, Andrew J; Wittich, Christopher M; West, Colin P; McDonald, Furman S

2011-12-01

Few studies have examined residents' retained knowledge and confidence regarding essential evidence-based medicine (EBM) topics. To compare postgraduate year-3 (PGY-3) residents' confidence with EBM topics taught during internship with that of PGY-1 residents before and after exposure to an EBM curriculum. All residents participated in an EBM curriculum during their intern year. We surveyed residents in 2009. PGY-1 residents completed a Likert-scale type survey (which included questions from the validated Berlin questionnaire and others, developed based on input from local EBM experts). We administered the Berlin questionnaire to a subset of PGY-3 residents. Forty-five PGY-3 (88%; n  =  51) and 42 PGY-1 (91%; n  =  46) residents completed the survey. Compared with PGY-1 residents pre-curriculum, PGY-3 residents were significantly more confident in their knowledge of pre- and posttest probability (mean difference, 1.14; P  =  .002), number needed to harm (mean difference, 1.09; P  =  .002), likelihood ratio (mean difference, 1.01; P  =  .003), formulation of a focused clinical question (mean difference, 0.98; P  =  .001), and critical appraisal of therapy articles (mean difference, 0.91; P  =  .002). Perceived confidence was significantly lower for PGY-3 than post-curriculum PGY-1 residents on relative risk (mean difference, -0.86; P  =  .002), study design for prognosis questions (mean difference, -0.75; P  =  .004), number needed to harm (mean difference, -0.67; P  =  .01), ability to critically appraise systematic reviews (mean difference, -0.65, P  =  .009), and retrieval of evidence (mean difference, -0.56; P  =  .008), among others. There was no relationship between confidence with and actual knowledge of EBM topics. Our findings demonstrate lower confidence among PGY-3 than among PGY-1 internal medicine residents for several EBM topics. PGY-3 residents demonstrated poor knowledge of several core topics taught

Southwest Border Food Safety and Defense Center: Creative Ideas for Promoting Food Safety and Food Protection

ERIC Educational Resources Information Center

Koukel, Sonja

2015-01-01

Foodborne illness has a significant impact on public health and consumer confidence in the U.S. The Southwest Border Food Safety and Defense Center was established to provide educational programs, trainings, and workshops to address the health and well-being of consumers as it relates to food safety and food protection. A partnership between New…

Understanding safety-critical interactions with a home medical device through Distributed Cognition.

PubMed

Rajkomar, Atish; Mayer, Astrid; Blandford, Ann

2015-08-01

As healthcare shifts from the hospital to the home, it is becoming increasingly important to understand how patients interact with home medical devices, to inform the safe and patient-friendly design of these devices. Distributed Cognition (DCog) has been a useful theoretical framework for understanding situated interactions in the healthcare domain. However, it has not previously been applied to study interactions with home medical devices. In this study, DCog was applied to understand renal patients' interactions with Home Hemodialysis Technology (HHT), as an example of a home medical device. Data was gathered through ethnographic observations and interviews with 19 renal patients and interviews with seven professionals. Data was analyzed through the principles summarized in the Distributed Cognition for Teamwork methodology. In this paper we focus on the analysis of system activities, information flows, social structures, physical layouts, and artefacts. By explicitly considering different ways in which cognitive processes are distributed, the DCog approach helped to understand patients' interaction strategies, and pointed to design opportunities that could improve patients' experiences of using HHT. The findings highlight the need to design HHT taking into consideration likely scenarios of use in the home and of the broader home context. A setting such as home hemodialysis has the characteristics of a complex and safety-critical socio-technical system, and a DCog approach effectively helps to understand how safety is achieved or compromised in such a system. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

Sources of sport confidence, imagery type and performance among competitive athletes: the mediating role of sports confidence.

PubMed

Levy, A R; Perry, J; Nicholls, A R; Larkin, D; Davies, J

2015-01-01

This study explored the mediating role of sport confidence upon (1) sources of sport confidence-performance relationship and (2) imagery-performance relationship. Participants were 157 competitive athletes who completed state measures of confidence level/sources, imagery type and performance within one hour after competition. Among the current sample, confirmatory factor analysis revealed appropriate support for the nine-factor SSCQ and the five-factor SIQ. Mediational analysis revealed that sport confidence had a mediating influence upon the achievement source of confidence-performance relationship. In addition, both cognitive and motivational imagery types were found to be important sources of confidence, as sport confidence mediated imagery type- performance relationship. Findings indicated that athletes who construed confidence from their own achievements and report multiple images on a more frequent basis are likely to benefit from enhanced levels of state sport confidence and subsequent performance.

The Elementary Science Safety Manual. Revised.

ERIC Educational Resources Information Center

New Jersey State Dept. of Education, Trenton. Div. of General Academic Education.

Based on the principle that safety education should be a vital component in science instruction, this manual was designed to assist elementary teachers in doing more experiments and activities more confidently by making them aware of dangers and precautions. It also aims to make students aware that safety is a lifetime process and responsibility.…

Offshore safety case approach and formal safety assessment of ships.

PubMed

Wang, J

2002-01-01

Tragic marine and offshore accidents have caused serious consequences including loss of lives, loss of property, and damage of the environment. A proactive, risk-based "goal setting" regime is introduced to the marine and offshore industries to increase the level of safety. To maximize marine and offshore safety, risks need to be modeled and safety-based decisions need to be made in a logical and confident way. Risk modeling and decision-making tools need to be developed and applied in a practical environment. This paper describes both the offshore safety case approach and formal safety assessment of ships in detail with particular reference to the design aspects. The current practices and the latest development in safety assessment in both the marine and offshore industries are described. The relationship between the offshore safety case approach and formal ship safety assessment is described and discussed. Three examples are used to demonstrate both the offshore safety case approach and formal ship safety assessment. The study of risk criteria in marine and offshore safety assessment is carried out. The recommendations on further work required are given. This paper gives safety engineers in the marine and offshore industries an overview of the offshore safety case approach and formal ship safety assessment. The significance of moving toward a risk-based "goal setting" regime is given.

Neurophysiology of perceived confidence.

PubMed

Graziano, Martin; Parra, Lucas C; Sigman, Mariano

2010-01-01

In a partial report paradigm, subjects observe during a brief presentation a cluttered field and after some time - typically ranging from 100 ms to a second - are asked to report a subset of the presented elements. A vast buffer of information is transiently available to be broadcasted which, if not retrieved in time, fades rapidly without reaching consciousness. An interesting feature of this experiment is that objective performance and subjective confidence is decoupled. This converts this paradigm in an ideal vehicle to understand the brain dynamics of the construction of confidence. Here we report a high-density EEG experiment in which we infer elements of the EEG response which are indicative of subjective confidence. We find that an early response during encoding partially correlates with perceived confidence. However, the bulk of the weight of subjective confidence is determined during a late, N400-like waveform, during the retrieval stage. This shows that we can find markers of access to internal, subjective states, that are uncoupled from objective response and stimulus properties of the task, and we propose that this can be used with decoding methods of EEG to infer subjective mental states.

Gaining Confidence in Navigating Rosetta at Mars Swing-By

NASA Technical Reports Server (NTRS)

Crammn, Ruediger; Budnik, Frank

2007-01-01

The Mars swing-by in the early morning of the 25th of February 2007 was one of the most critical events the Rosetta mission has experienced so far on its way to the comet Churyumov-Gerasimenko. The closest approach took place at a distance of only 250 km from the planet s surface. Missing the optimal target would have translated into considerable fuel cost. In order to achieve confidence in operating through this highly critical mission phase, a navigation analysis exercise was carried out beforehand. This paper describes the purpose and the chosen approach for this preparatory Flight Dynamics activity. It presents and discusses results of the analysis. Emphasis is put on the question of what is needed to simulate a valuable data set representative for operations. The results of the navigation analysis are compared with real data obtained during swing-by operations.

Conductor Feedback and the Amateur Singer: The Role of Criticism and Praise in Building Choral Confidence

ERIC Educational Resources Information Center

Bonshor, Michael

2017-01-01

This article is based on the findings of a qualitative exploration of factors influencing confidence levels among adult amateur choral singers. Three focus group interviews, involving 18 singers in total, and 16 individual interviews were carried out. These provided over 40 hours of recorded verbal data, which then underwent a process of…

Exploring separable components of institutional confidence.

PubMed

Hamm, Joseph A; PytlikZillig, Lisa M; Tomkins, Alan J; Herian, Mitchel N; Bornstein, Brian H; Neeley, Elizabeth M

2011-01-01

Despite its contemporary and theoretical importance in numerous social scientific disciplines, institutional confidence research is limited by a lack of consensus regarding the distinctions and relationships among related constructs (e.g., trust, confidence, legitimacy, distrust, etc.). This study examined four confidence-related constructs that have been used in studies of trust/confidence in the courts: dispositional trust, trust in institutions, obligation to obey the law, and cynicism. First, the separability of the four constructs was examined by exploratory factor analyses. Relationships among the constructs were also assessed. Next, multiple regression analyses were used to explore each construct's independent contribution to confidence in the courts. Finally, a second study replicated the first study and also examined the stability of the institutional confidence constructs over time. Results supported the hypothesized separability of, and correlations among, the four confidence-related constructs. The extent to which the constructs independently explained the observed variance in confidence in the courts differed as a function of the specific operationalization of confidence in the courts and the individual predictor measures. Implications for measuring institutional confidence and future research directions are discussed. Copyright © 2011 John Wiley & Sons, Ltd.

Developing a 'critical' approach to patient and public involvement in patient safety in the NHS: learning lessons from other parts of the public sector?

PubMed

Ocloo, Josephine E; Fulop, Naomi J

2012-12-01

There has been considerable momentum within the NHS over the last 10 years to develop greater patient and public involvement (PPI). This commitment has been reflected in numerous policy initiatives. In patient safety, the drive to increase involvement has increasingly been seen as an important way of building a safety culture. Evidence suggests, however, that progress has been slow and even more variable than in health care generally. Given this context, the paper analyses some of the key underlying drivers for involvement in the wider context of health and social care and makes some suggestions on what lessons can be learned for developing the PPI agenda in patient safety. To develop PPI further, it is argued that a greater understanding is needed of the contested nature of involvement in patient safety and how this has similarities to the emergence of user involvement in other parts of the public services. This understanding has led to the development of a range of critical theories to guide involvement that also make more explicit the underlying factors that support and hinder involvement processes, often related to power inequities and control. Achieving greater PPI in patient safety is therefore seen to require a more critical framework for understanding processes of involvement that can also help guide and evaluate involvement practices. © 2011 Blackwell Publishing Ltd.

NASA's Software Safety Standard

NASA Technical Reports Server (NTRS)

Ramsay, Christopher M.

2007-01-01

NASA relies more and more on software to control, monitor, and verify its safety critical systems, facilities and operations. Since the 1960's there has hardly been a spacecraft launched that does not have a computer on board that will provide command and control services. There have been recent incidents where software has played a role in high-profile mission failures and hazardous incidents. For example, the Mars Orbiter, Mars Polar Lander, the DART (Demonstration of Autonomous Rendezvous Technology), and MER (Mars Exploration Rover) Spirit anomalies were all caused or contributed to by software. The Mission Control Centers for the Shuttle, ISS, and unmanned programs are highly dependant on software for data displays, analysis, and mission planning. Despite this growing dependence on software control and monitoring, there has been little to no consistent application of software safety practices and methodology to NASA's projects with safety critical software. Meanwhile, academia and private industry have been stepping forward with procedures and standards for safety critical systems and software, for example Dr. Nancy Leveson's book Safeware: System Safety and Computers. The NASA Software Safety Standard, originally published in 1997, was widely ignored due to its complexity and poor organization. It also focused on concepts rather than definite procedural requirements organized around a software project lifecycle. Led by NASA Headquarters Office of Safety and Mission Assurance, the NASA Software Safety Standard has recently undergone a significant update. This new standard provides the procedures and guidelines for evaluating a project for safety criticality and then lays out the minimum project lifecycle requirements to assure the software is created, operated, and maintained in the safest possible manner. This update of the standard clearly delineates the minimum set of software safety requirements for a project without detailing the implementation for those

Post choice information integration as a causal determinant of confidence: Novel data and a computational account.

PubMed

Moran, Rani; Teodorescu, Andrei R; Usher, Marius

2015-05-01

Confidence judgments are pivotal in the performance of daily tasks and in many domains of scientific research including the behavioral sciences, psychology and neuroscience. Positive resolution i.e., the positive correlation between choice-correctness and choice-confidence is a critical property of confidence judgments, which justifies their ubiquity. In the current paper, we study the mechanism underlying confidence judgments and their resolution by investigating the source of the inputs for the confidence-calculation. We focus on the intriguing debate between two families of confidence theories. According to single stage theories, confidence is based on the same information that underlies the decision (or on some other aspect of the decision process), whereas according to dual stage theories, confidence is affected by novel information that is collected after the decision was made. In three experiments, we support the case for dual stage theories by showing that post-choice perceptual availability manipulations exert a causal effect on confidence-resolution in the decision followed by confidence paradigm. These finding establish the role of RT2, the duration of the post-choice information-integration stage, as a prime dependent variable that theories of confidence should account for. We then present a novel list of robust empirical patterns ('hurdles') involving RT2 to guide further theorizing about confidence judgments. Finally, we present a unified computational dual stage model for choice, confidence and their latencies namely, the collapsing confidence boundary model (CCB). According to CCB, a diffusion-process choice is followed by a second evidence-integration stage towards a stochastic collapsing confidence boundary. Despite its simplicity, CCB clears the entire list of hurdles. Copyright © 2015 Elsevier Inc. All rights reserved.

Distinguishing highly confident accurate and inaccurate memory: insights about relevant and irrelevant influences on memory confidence.

PubMed

Chua, Elizabeth F; Hannula, Deborah E; Ranganath, Charan

2012-01-01

It is generally believed that accuracy and confidence in one's memory are related, but there are many instances when they diverge. Accordingly it is important to disentangle the factors that contribute to memory accuracy and confidence, especially those factors that contribute to confidence, but not accuracy. We used eye movements to separately measure fluent cue processing, the target recognition experience, and relative evidence assessment on recognition confidence and accuracy. Eye movements were monitored during a face-scene associative recognition task, in which participants first saw a scene cue, followed by a forced-choice recognition test for the associated face, with confidence ratings. Eye movement indices of the target recognition experience were largely indicative of accuracy, and showed a relationship to confidence for accurate decisions. In contrast, eye movements during the scene cue raised the possibility that more fluent cue processing was related to higher confidence for both accurate and inaccurate recognition decisions. In a second experiment we manipulated cue familiarity, and therefore cue fluency. Participants showed higher confidence for cue-target associations for when the cue was more familiar, especially for incorrect responses. These results suggest that over-reliance on cue familiarity and under-reliance on the target recognition experience may lead to erroneous confidence.

Distinguishing highly confident accurate and inaccurate memory: insights about relevant and irrelevant influences on memory confidence

PubMed Central

Chua, Elizabeth F.; Hannula, Deborah E.; Ranganath, Charan

2012-01-01

It is generally believed that accuracy and confidence in one’s memory are related, but there are many instances when they diverge. Accordingly, it is important to disentangle the factors which contribute to memory accuracy and confidence, especially those factors that contribute to confidence, but not accuracy. We used eye movements to separately measure fluent cue processing, the target recognition experience, and relative evidence assessment on recognition confidence and accuracy. Eye movements were monitored during a face-scene associative recognition task, in which participants first saw a scene cue, followed by a forced-choice recognition test for the associated face, with confidence ratings. Eye movement indices of the target recognition experience were largely indicative of accuracy, and showed a relationship to confidence for accurate decisions. In contrast, eye movements during the scene cue raised the possibility that more fluent cue processing was related to higher confidence for both accurate and inaccurate recognition decisions. In a second experiment, we manipulated cue familiarity, and therefore cue fluency. Participants showed higher confidence for cue-target associations for when the cue was more familiar, especially for incorrect responses. These results suggest that over-reliance on cue familiarity and under-reliance on the target recognition experience may lead to erroneous confidence. PMID:22171810

Sampling Theory and Confidence Intervals for Effect Sizes: Using ESCI To Illustrate "Bouncing"; Confidence Intervals.

ERIC Educational Resources Information Center

Du, Yunfei

This paper discusses the impact of sampling error on the construction of confidence intervals around effect sizes. Sampling error affects the location and precision of confidence intervals. Meta-analytic resampling demonstrates that confidence intervals can haphazardly bounce around the true population parameter. Special software with graphical…

A Silent Safety Program

NASA Technical Reports Server (NTRS)

Goodin, James Ronald

2006-01-01

NASA's Columbia Accident Investigation Board (CAIB) referred 8 times to the NASA "Silent Safety Program." This term, "Silent Safety Program" was not an original observation but first appeared in the Rogers Commission's Investigation of the Challenger Mishap. The CAIB on page 183 of its report in the paragraph titled 'Encouraging Minority Opinion,' stated "The Naval Reactor Program encourages minority opinions and "bad news." Leaders continually emphasize that when no minority opinions are present, the responsibility for a thorough and critical examination falls to management. . . Board interviews revealed that it is difficult for minority and dissenting opinions to percolate up through the agency's hierarchy. . ." The first question and perhaps the only question is - what is a silent safety program? Well, a silent safety program may be the same as the dog that didn't bark in Sherlock Holmes' "Adventure of the Silver Blaze" because system safety should behave as a devil's advocate for the program barking on every occasion to insure a critical review inclusion. This paper evaluates the NASA safety program and provides suggestions to prevent the recurrence of the silent safety program alluded to in the Challenger Mishap Investigation. Specifically targeted in the CAM report, "The checks and balances the safety system was meant to provide were not working." A silent system safety program is not unique to NASA but could emerge in any and every organization. Principles developed by Irving Janis in his book, Groupthink, listed criteria used to evaluate an organization's cultural attributes that allows a silent safety program to evolve. If evidence validates Jams's criteria, then Jams's recommendations for preventing groupthink can also be used to improve a critical evaluation and thus prevent the development of a silent safety program.

Explorations in Statistics: Confidence Intervals

ERIC Educational Resources Information Center

Curran-Everett, Douglas

2009-01-01

Learning about statistics is a lot like learning about science: the learning is more meaningful if you can actively explore. This third installment of "Explorations in Statistics" investigates confidence intervals. A confidence interval is a range that we expect, with some level of confidence, to include the true value of a population parameter…

Exact nonparametric confidence bands for the survivor function.

PubMed

Matthews, David

2013-10-12

A method to produce exact simultaneous confidence bands for the empirical cumulative distribution function that was first described by Owen, and subsequently corrected by Jager and Wellner, is the starting point for deriving exact nonparametric confidence bands for the survivor function of any positive random variable. We invert a nonparametric likelihood test of uniformity, constructed from the Kaplan-Meier estimator of the survivor function, to obtain simultaneous lower and upper bands for the function of interest with specified global confidence level. The method involves calculating a null distribution and associated critical value for each observed sample configuration. However, Noe recursions and the Van Wijngaarden-Decker-Brent root-finding algorithm provide the necessary tools for efficient computation of these exact bounds. Various aspects of the effect of right censoring on these exact bands are investigated, using as illustrations two observational studies of survival experience among non-Hodgkin's lymphoma patients and a much larger group of subjects with advanced lung cancer enrolled in trials within the North Central Cancer Treatment Group. Monte Carlo simulations confirm the merits of the proposed method of deriving simultaneous interval estimates of the survivor function across the entire range of the observed sample. This research was supported by the Natural Sciences and Engineering Research Council (NSERC) of Canada. It was begun while the author was visiting the Department of Statistics, University of Auckland, and completed during a subsequent sojourn at the Medical Research Council Biostatistics Unit in Cambridge. The support of both institutions, in addition to that of NSERC and the University of Waterloo, is greatly appreciated.

Parent's confidence as a caregiver.

PubMed

Raines, Deborah A; Brustad, Judith

2012-06-01

The purpose of this study was to describe the parent's self-reported confidence as a caregiver. The specific research questions were as follows: • What is the parent's perceived level of confidence when performing infant caregiving activities in the neonatal intensive care unit (NICU)? • What is the parent's projected level of confidence about performing infant caregiving activities on the first day at home? Participants were parents of infants with an anticipated discharge date within 5 days. Inclusion criteria were as follows: parent at least 18 years of age, infant's discharge destination is home with the parent, parent will have primary responsibility for the infant after discharge, and the infant's length of stay in the NICU was a minimum of 10 days. Descriptive, survey research. Participants perceived themselves to be confident in all but 2 caregiving activities when caring for their infants in the NICU, but parents projected a change in their level of confidence in their ability to independently complete infant care activities at home. When comparing the self-reported level of confidence in the NICU and the projected level of confidence at home, the levels of confidence decreased for 5 items, increased for 8 items, and remained unchanged for 2 items. All of the items with a decrease in score were the items with the lowest score when performed in the NICU. All of these low-scoring items are caregiving activities that are unique to the post-NICU status of the infant. Interestingly, the parent's projected level of confidence increased for the 8 items focused on handling and interacting with the infant. The findings of this research provide evidence that nurses may need to rethink when parents become active participants in their infant's medical-based caregiving activities.

Establishing confidence in the output of qualitative research synthesis: the ConQual approach.

PubMed

Munn, Zachary; Porritt, Kylie; Lockwood, Craig; Aromataris, Edoardo; Pearson, Alan

2014-09-20

The importance of findings derived from syntheses of qualitative research has been increasingly acknowledged. Findings that arise from qualitative syntheses inform questions of practice and policy in their own right and are commonly used to complement findings from quantitative research syntheses. The GRADE approach has been widely adopted by international organisations to rate the quality and confidence of the findings of quantitative systematic reviews. To date, there has been no widely accepted corresponding approach to assist health care professionals and policy makers in establishing confidence in the synthesised findings of qualitative systematic reviews. A methodological group was formed develop a process to assess the confidence in synthesised qualitative research findings and develop a Summary of Findings tables for meta-aggregative qualitative systematic reviews. Dependability and credibility are two elements considered by the methodological group to influence the confidence of qualitative synthesised findings. A set of critical appraisal questions are proposed to establish dependability, whilst credibility can be ranked according to the goodness of fit between the author's interpretation and the original data. By following the processes outlined in this article, an overall ranking can be assigned to rate the confidence of synthesised qualitative findings, a system we have labelled ConQual. The development and use of the ConQual approach will assist users of qualitative systematic reviews to establish confidence in the evidence produced in these types of reviews and can serve as a practical tool to assist in decision making.

A boost of confidence: The role of the ventromedial prefrontal cortex in memory, decision-making, and schemas.

PubMed

Hebscher, Melissa; Gilboa, Asaf

2016-09-01

The ventromedial prefrontal cortex (vmPFC) has been implicated in a wide array of functions across multiple domains. In this review, we focus on the vmPFC's involvement in mediating strategic aspects of memory retrieval, memory-related schema functions, and decision-making. We suggest that vmPFC generates a confidence signal that informs decisions and memory-guided behaviour. Confidence is central to these seemingly diverse functions: (1) Strategic retrieval: lesions to the vmPFC impair an early, automatic, and intuitive monitoring process ("feeling of rightness"; FOR) often associated with confabulation (spontaneous reporting of erroneous memories). Critically, confabulators typically demonstrate high levels of confidence in their false memories, suggesting that faulty monitoring following vmPFC damage may lead to indiscriminate confidence signals. (2) Memory schemas: the vmPFC is critically involved in instantiating and maintaining contextually relevant schemas, broadly defined as higher level knowledge structures that encapsulate lower level representational elements. The correspondence between memory retrieval cues and these activated schemas leads to FOR monitoring. Stronger, more elaborate schemas produce stronger FOR and influence confidence in the veracity of memory candidates. (3) Finally, we review evidence on the vmPFC's role in decision-making, extending this role to decision-making during memory retrieval. During non-mnemonic and mnemonic decision-making the vmPFC automatically encodes confidence. Confidence signal in the vmPFC is revealed as a non-linear relationship between a first-order monitoring assessment and second-order action or choice. Attempting to integrate the multiple functions of the vmPFC, we propose a posterior-anterior organizational principle for this region. More posterior vmPFC regions are involved in earlier, automatic, subjective, and contextually sensitive functions, while more anterior regions are involved in controlled actions

Criticality Safety Analysis on the Mixed Be, Nat-U, and C (Graphite) Reflectors in 55-Gallon Waste Drums and Their Equivalents for HWM Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chou, P

The objective of this analysis is to develop and establish the technical basis on the criticality safety controls for the storage of mixed beryllium (Be), natural uranium (Nat-U), and carbon (C)/graphite reflectors in 55-gallon waste containers and/or their equivalents in Hazardous Waste Management (HWM) facilities. Based on the criticality safety limits and controls outlined in Section 3.0, the operations involving the use of mixed-reflector drums satisfy the double-contingency principle as required by DOE Order 420.1 and are therefore criticality safe. The mixed-reflector mass limit is 120 grams for each 55-gallon drum or its equivalent. a reflector waiver of 50 gramsmore » is allowed for Be, Nat-U, or C/graphite combined. The waived reflectors may be excluded from the reflector mass calculations when determining if a drum is compliant. The mixed-reflector drums are allowed to mix with the typical 55-gallon one-reflector drums with a Pu mass limit of 120 grams. The fissile mass limit for the mixed-reflector container is 65 grams of Pu equivalent each. The corresponding reflector mass limits are 300 grams of Be, and/or 100 kilograms of Nat-U, and/or 110 kilograms of C/graphite for each container. All other unaffected control parameters for the one-reflector containers remain in effect for the mixed-reflector drums. For instance, Superior moderators, such as TrimSol, Superla white mineral oil No. 9, paraffin, and polyethylene, are allowed in unlimited quantities. Hydrogenous materials with a hydrogen density greater than 0.133 gram/cc are not allowed. Also, an isolation separation of no less than 76.2 cm (30-inch) is required between a mixed array and any other array. Waste containers in the action of being transported are exempted from this 76.2-cm (30-inch) separation requirement. All deviations from the CS controls and mass limits listed in Section 3.0 will require individual criticality safety analyses on a case-by-case basis for each of them to confirm their

eMolTox: prediction of molecular toxicity with confidence.

PubMed

Ji, Changge; Svensson, Fredrik; Zoufir, Azedine; Bender, Andreas

2018-03-07

In this work we present eMolTox, a web server for the prediction of potential toxicity associated with a given molecule. 174 toxicology-related in vitro/vivo experimental datasets were used for model construction and Mondrian conformal prediction was used to estimate the confidence of the resulting predictions. Toxic substructure analysis is also implemented in eMolTox. eMolTox predicts and displays a wealth of information of potential molecular toxicities for safety analysis in drug development. The eMolTox Server is freely available for use on the web at http://xundrug.cn/moltox. chicago.ji@gmail.com or ab454@cam.ac.uk. Supplementary data are available at Bioinformatics online.

Student Ability, Confidence, and Attitudes Toward Incorporating a Computer into a Patient Interview.

PubMed

Ray, Sarah; Valdovinos, Katie

2015-05-25

To improve pharmacy students' ability to effectively incorporate a computer into a simulated patient encounter and to improve their awareness of barriers and attitudes towards and their confidence in using a computer during simulated patient encounters. Students completed a survey that assessed their awareness of, confidence in, and attitudes towards computer use during simulated patient encounters. Students were evaluated with a rubric on their ability to incorporate a computer into a simulated patient encounter. Students were resurveyed and reevaluated after instruction. Students improved in their ability to effectively incorporate computer usage into a simulated patient encounter. They also became more aware of and improved their attitudes toward barriers regarding such usage and gained more confidence in their ability to use a computer during simulated patient encounters. Instruction can improve pharmacy students' ability to incorporate a computer into simulated patient encounters. This skill is critical to developing efficiency while maintaining rapport with patients.

Confidence intervals for a difference between lognormal means in cluster randomization trials.

PubMed

Poirier, Julia; Zou, G Y; Koval, John

2017-04-01

Cluster randomization trials, in which intact social units are randomized to different interventions, have become popular in the last 25 years. Outcomes from these trials in many cases are positively skewed, following approximately lognormal distributions. When inference is focused on the difference between treatment arm arithmetic means, existent confidence interval procedures either make restricting assumptions or are complex to implement. We approach this problem by assuming log-transformed outcomes from each treatment arm follow a one-way random effects model. The treatment arm means are functions of multiple parameters for which separate confidence intervals are readily available, suggesting that the method of variance estimates recovery may be applied to obtain closed-form confidence intervals. A simulation study showed that this simple approach performs well in small sample sizes in terms of empirical coverage, relatively balanced tail errors, and interval widths as compared to existing methods. The methods are illustrated using data arising from a cluster randomization trial investigating a critical pathway for the treatment of community acquired pneumonia.

Confidence and connectedness: Indigenous Māori women's views on personal safety in the context of intimate partner violence.

PubMed

Wilson, Denise; Jackson, Debra; Herd, Ruth

2016-07-01

Māori (New Zealand) women, similar to women belonging to Indigenous and minority groups globally, have high levels of lifetime abuse, assault, and homicide, and are over-represented in events that compromise their safety. We sought insights into how Māori women view safety. Twenty Māori women's narratives revealed safety as a holistic concept involving a number of different elements. We found women had developed an acute sense of the concept of safety. They had firm views and clear strategies to maintain their own safety and that of their female family and friends. These women also provided insights into their experiences of feeling unsafe.

Building Scientific Confidence in Read-Across: Progress in using HT Data to inform Read-Across Performance (Toxicology Forum)

EPA Science Inventory

Presentation at the 41st Annual Winter Meeting of The Toxicology Forum - From Assay to Assessment: Incorporating High Throughput Strategies into Health and Safety Evaluations on Building Scientific Confidence in Read-Across: Progress in using HT Data to inform Read-Across Perfor...

Confidence in outcome estimates from systematic reviews used in informed consent.

PubMed

Fritz, Robert; Bauer, Janet G; Spackman, Sue S; Bains, Amanjyot K; Jetton-Rangel, Jeanette

2016-12-01

Evidence-based dentistry now guides informed consent in which clinicians are obliged to provide patients with the most current, best evidence, or best estimates of outcomes, of regimens, therapies, treatments, procedures, materials, and equipment or devices when developing personal oral health care, treatment plans. Yet, clinicians require that the estimates provided from systematic reviews be verified to their validity, reliability, and contextualized as to performance competency so that clinicians may have confidence in explaining outcomes to patients in clinical practice. The purpose of this paper was to describe types of informed estimates from which clinicians may have confidence in their capacity to assist patients in competent decision-making, one of the most important concepts of informed consent. Using systematic review methodology, researchers provide clinicians with valid best estimates of outcomes regarding a subject of interest from best evidence. Best evidence is verified through critical appraisals using acceptable sampling methodology either by scoring instruments (Timmer analysis) or checklist (grade), a Cochrane Collaboration standard that allows transparency in open reviews. These valid best estimates are then tested for reliability using large databases. Finally, valid and reliable best estimates are assessed for meaning using quantification of margins and uncertainties. Through manufacturer and researcher specifications, quantification of margins and uncertainties develops a performance competency continuum by which valid, reliable best estimates may be contextualized for their performance competency: at a lowest margin performance competency (structural failure), high margin performance competency (estimated true value of success), or clinically determined critical values (clinical failure). Informed consent may be achieved when clinicians are confident of their ability to provide useful and accurate best estimates of outcomes regarding

HYGIENE PRACTICES IN URBAN RESTAURANTS AND CHALLENGES TO IMPLEMENTING FOOD SAFETY AND HAZARD ANALYSIS CRITICAL CONTROL POINTS (HACCP) PROGRAMMES IN THIKA TOWN, KENYA.

PubMed

Muinde, R K; Kiinyukia, C; Rombo, G O; Muoki, M A

2012-12-01

To determine the microbial load in food, examination of safety measures and possibility of implementing an Hazard Analysis Critical Control Points (HACCP) system. The target population for this study consisted of restaurants owners in Thika. Municipality (n = 30). Simple randomsamples of restaurantswere selected on a systematic sampling method of microbial analysis in cooked, non-cooked, raw food and water sanitation in the selected restaurants. Two hundred and ninety eight restaurants within Thika Municipality were selected. Of these, 30 were sampled for microbiological testing. From the study, 221 (74%) of the restaurants were ready to eat establishments where food was prepared early enough to hold and only 77(26%) of the total restaurants, customers made an order of food they wanted. 118(63%) of the restaurant operators/staff had knowledge on quality control on food safety measures, 24 (8%) of the restaurants applied these knowledge while 256 (86%) of the restaurants staff showed that food contains ingredients that were hazard if poorly handled. 238 (80%) of the resultants used weighing and sorting of food materials, 45 (15%) used preservation methods and the rest used dry foods as critical control points on food safety measures. The study showed that there was need for implementation of Hazard Analysis Critical Control Points (HACCP) system to enhance food safety. Knowledge of HACCP was very low with 89 (30%) of the restaurants applying some of quality measures to the food production process systems. There was contamination with Coliforms, Escherichia coli and Staphylococcus aureus microbial though at very low level. The means of Coliforms, Escherichia coli and Staphylococcus aureas microbial in sampled food were 9.7 x 103CFU/gm, 8.2 x 103 CFU/gm and 5.4 x 103 CFU/gm respectively with Coliforms taking the highest mean.

Medication safety in the home care setting: Development and piloting of a Critical Incident Reporting System

PubMed

Meyer-Massetti, Carla; Krummenacher, Evelyne; Hedinger-Grogg, Barbara; Luterbacher, Stephan; Hersberger, Kurt E

2016-09-01

Background: While drug-related problems are among the most frequent adverse events in health care, little is known about their type and prevalence in home care in the current literature. The use of a Critical Incident Reporting System (CIRS), known as an economic and efficient tool to record medication errors for subsequent analysis, is widely implemented in inpatient care, but less established in ambulatory care. Recommendations on a possible format are scarce. A manual CIRS was developed based on the literature and subsequently piloted and implemented in a Swiss home care organization. Aim: The aim of this work was to implement a critical incident reporting system specifically for medication safety in home care. Results: The final CIRS form was well accepted among staff. Requiring limited resources, it allowed preliminary identification and trending of medication errors in home care. The most frequent error reports addressed medication preparation at the patients’ home, encompassing the following errors: omission (30 %), wrong dose (17.5 %) and wrong time (15 %). The most frequent underlying causes were related to working conditions (37.9 %), lacking attention (68.2 %), time pressure (22.7 %) and interruptions by patients (9.1 %). Conclusions: A manual CIRS allowed efficient data collection and subsequent analysis of medication errors in order to plan future interventions for improvement of medication safety. The development of an electronic CIRS would allow a reduction of the expenditure of time regarding data collection and analysis. In addition, it would favour the development of a national CIRS network among home care institutions.

Sorting Through the Spheres of Influence: Using Modified Pile Sorting to Describe Who Influences Dairy Farmers' Decision-Making About Safety.

PubMed

Bendixsen, Casper; Barnes, Kathrine; Kieke, Burney; Schenk, Danielle; Simich, Jessica; Keifer, Matthew

2017-01-01

The primary goal of this study was to describe the mutually perceived influence of bankers and insurers on their agricultural clients' decision-making regarding health and safety. Semistructured interviews were conducted with 10 dairy farmers, 11 agricultural bankers, and 10 agricultural insurers from central Wisconsin. Three of the interview questions involved pile sorting. Pile sorting included 5-point Likert-like scales to help participants sort through 32 index cards. Each card represented an individual or group that was thought to possibly affect farmers' decision-making, both generally and about health and safety. Results (photographs of piles of cards quantified into spread sheets, fieldnotes, and interview transcripts) were analyzed with SAS and NVivo. All three groups expressed moderate-to-strong positive opinions about involving agricultural bankers (x2(2) = 2.8155, p = 0.2695), although bankers qualitatively expressed apprehension due to regulations on the industry. Insurance agents received more positive support, particularly from bankers but also from dairy farmers themselves, and expressed more confidence in being involved in designing and implementing a farm safety program. Agricultural bankers and insurers can influence individual farmer's decision-making about health and safety. Both are believed to be good purveyors of safety programs and knowledge, especially when leveraging financial incentives. Insurance agents are thought to be more critical in the design of safety programs. Insurers and bankers being financially tied to safety programs may prove both positive and negative, as farmers may be skeptical about the intention of the incentives, making messaging critical.

Senior Internal Medicine Residents' Confidence with Essential Topics in Evidence-Based Medicine Taught During Internship

PubMed Central

Keddis, Mira T.; Beckman, Thomas J.; Cullen, Michael W.; Reed, Darcy A.; Halvorsen, Andrew J.; Wittich, Christopher M.; West, Colin P.; McDonald, Furman S.

2011-01-01

Background Few studies have examined residents' retained knowledge and confidence regarding essential evidence-based medicine (EBM) topics. Objective To compare postgraduate year-3 (PGY-3) residents' confidence with EBM topics taught during internship with that of PGY-1 residents before and after exposure to an EBM curriculum. Methods All residents participated in an EBM curriculum during their intern year. We surveyed residents in 2009. PGY-1 residents completed a Likert-scale type survey (which included questions from the validated Berlin questionnaire and others, developed based on input from local EBM experts). We administered the Berlin questionnaire to a subset of PGY-3 residents. Results Forty-five PGY-3 (88%; n  =  51) and 42 PGY-1 (91%; n  =  46) residents completed the survey. Compared with PGY-1 residents pre-curriculum, PGY-3 residents were significantly more confident in their knowledge of pre- and posttest probability (mean difference, 1.14; P  =  .002), number needed to harm (mean difference, 1.09; P  =  .002), likelihood ratio (mean difference, 1.01; P  =  .003), formulation of a focused clinical question (mean difference, 0.98; P  =  .001), and critical appraisal of therapy articles (mean difference, 0.91; P  =  .002). Perceived confidence was significantly lower for PGY-3 than post-curriculum PGY-1 residents on relative risk (mean difference, −0.86; P  =  .002), study design for prognosis questions (mean difference, −0.75; P  =  .004), number needed to harm (mean difference, −0.67; P  =  .01), ability to critically appraise systematic reviews (mean difference, −0.65, P  =  .009), and retrieval of evidence (mean difference, −0.56; P  =  .008), among others. There was no relationship between confidence with and actual knowledge of EBM topics. Conclusions Our findings demonstrate lower confidence among PGY-3 than among PGY-1 internal medicine residents for several EBM topics. PGY-3 residents

A Validation Metrics Framework for Safety-Critical Software-Intensive Systems

DTIC Science & Technology

2009-03-01

so does its definition, tools, and techniques, including means for measuring the validation activity, its outputs, and impact on development...independent of the SDLP. When considering the above SDLPs from the safety engineering team’s perspective, there are also large impacts on the way... impact . Interpretation of any actionable metric data will need to be undertaken in the context of the SDLP. 2. Safety Input The software safety

Safety and feasibility of an exercise prescription approach to rehabilitation across the continuum of care for survivors of critical illness.

PubMed

Berney, Sue; Haines, Kimberley; Skinner, Elizabeth H; Denehy, Linda

2012-12-01

Survivors of critical illness can experience long-standing functional limitations that negatively affect their health-related quality of life. To date, no model of rehabilitation has demonstrated sustained improvements in physical function for survivors of critical illness beyond hospital discharge. The aims of this study were: (1) to describe a model of rehabilitation for survivors of critical illness, (2) to compare the model to local standard care, and (3) to report the safety and feasibility of the program. This was a cohort study. As part of a larger randomized controlled trial, 74 participants were randomly assigned, 5 days following admission to the intensive care unit (ICU), to a protocolized rehabilitation program that commenced in the ICU and continued on the acute care ward and for a further 8 weeks following hospital discharge as an outpatient program. Exercise training was prescribed based on quantitative outcome measures to achieve a physiological training response. During acute hospitalization, 60% of exercise sessions were able to be delivered. The most frequently occurring barriers to exercise were patient safety and patient refusal due to fatigue. Point prevalence data showed patients were mobilized more often and for longer periods compared with standard care. Outpatient classes were poorly attended, with only 41% of the patients completing more than 70% of outpatient classes. No adverse events occurred. Limitations included patient heterogeneity and delayed commencement of exercise in the ICU due to issues of consent and recruitment. Exercise training that commences in the ICU and continues through to an outpatient program is safe and feasible for survivors of critical illness. Models of care that maximize patient participation across the continuum of care warrant further investigation.

The Relationship between Confidence and Self-Concept--Towards a Model of Response Confidence

ERIC Educational Resources Information Center

Kroner, Stephan; Biermann, Antje

2007-01-01

According to Stankov [Stankov, L. (2000). Complexity, metacognition and fluid intelligence. Intelligence, 28, 121-143.] response confidence in cognitive tests reflects a trait on the boundary of personality and abilities. However, several studies failed in relating confidence scores to other known traits, including self-concept. A model of…

Safety Hazards During Intrahospital Transport: A Prospective Observational Study.

PubMed

Bergman, Lina M; Pettersson, Monica E; Chaboyer, Wendy P; Carlström, Eric D; Ringdal, Mona L

2017-10-01

To identify, classify, and describe safety hazards during the process of intrahospital transport of critically ill patients. A prospective observational study. Data from participant observations of the intrahospital transport process were collected over a period of 3 months. The study was undertaken at two ICUs in one university hospital. Critically ill patients transported within the hospital by critical care nurses, unlicensed nurses, and physicians. None. Content analysis was performed using deductive and inductive approaches. We detected a total of 365 safety hazards (median, 7; interquartile range, 4-10) during 51 intrahospital transports of critically ill patients, 80% of whom were mechanically ventilated. The majority of detected safety hazards were assessed as increasing the risk of harm, compromising patient safety (n = 204). Using the System Engineering Initiative for Patient Safety, we identified safety hazards related to the work system, as follows: team (n = 61), tasks (n = 83), tools and technologies (n = 124), environment (n = 48), and organization (n = 49). Inductive analysis provided an in-depth description of those safety hazards, contributing factors, and process-related outcomes. Findings suggest that intrahospital transport is a hazardous process for critically ill patients. We have identified several factors that may contribute to transport-related adverse events, which will provide the opportunity for the redesign of systems to enhance patient safety.

Deep Borehole Disposal Safety Analysis.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Freeze, Geoffrey A.; Stein, Emily; Price, Laura L.

This report presents a preliminary safety analysis for the deep borehole disposal (DBD) concept, using a safety case framework. A safety case is an integrated collection of qualitative and quantitative arguments, evidence, and analyses that substantiate the safety, and the level of confidence in the safety, of a geologic repository. This safety case framework for DBD follows the outline of the elements of a safety case, and identifies the types of information that will be required to satisfy these elements. At this very preliminary phase of development, the DBD safety case focuses on the generic feasibility of the DBD concept.more » It is based on potential system designs, waste forms, engineering, and geologic conditions; however, no specific site or regulatory framework exists. It will progress to a site-specific safety case as the DBD concept advances into a site-specific phase, progressing through consent-based site selection and site investigation and characterization.« less

Physics of reactor safety. Quarterly report, January--March 1977. [LMFBR

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1977-06-01

This report summarizes work done on reactor safety, Monte Carlo analysis of safety-related critical assembly experiments, and planning of DEMI safety-related critical experiments. Work on reactor core thermal-hydraulics is also included.

The range of confidence scales does not affect the relationship between confidence and accuracy in recognition memory.

PubMed

Tekin, Eylul; Roediger, Henry L

2017-01-01

Researchers use a wide range of confidence scales when measuring the relationship between confidence and accuracy in reports from memory, with the highest number usually representing the greatest confidence (e.g., 4-point, 20-point, and 100-point scales). The assumption seems to be that the range of the scale has little bearing on the confidence-accuracy relationship. In two old/new recognition experiments, we directly investigated this assumption using word lists (Experiment 1) and faces (Experiment 2) by employing 4-, 5-, 20-, and 100-point scales. Using confidence-accuracy characteristic (CAC) plots, we asked whether confidence ratings would yield similar CAC plots, indicating comparability in use of the scales. For the comparisons, we divided 100-point and 20-point scales into bins of either four or five and asked, for example, whether confidence ratings of 4, 16-20, and 76-100 would yield similar values. The results show that, for both types of material, the different scales yield similar CAC plots. Notably, when subjects express high confidence, regardless of which scale they use, they are likely to be very accurate (even though they studied 100 words and 50 faces in each list in 2 experiments). The scales seem convertible from one to the other, and choice of scale range probably does not affect research into the relationship between confidence and accuracy. High confidence indicates high accuracy in recognition in the present experiments.

Critical Review of Commercial Secondary Lithium-Ion Battery Safety Standards

NASA Astrophysics Data System (ADS)

Jones, Harry P.; Chapin, Thomas, J.; Tabaddor, Mahmod

2010-09-01

The development of Li-ion cells with greater energy density has lead to safety concerns that must be carefully assessed as Li-ion cells power a wide range of products from consumer electronics to electric vehicles to space applications. Documented field failures and product recalls for Li-ion cells, mostly for consumer electronic products, highlight the risk of fire, smoke, and even explosion. These failures have been attributed to the occurrence of internal short circuits and the subsequent thermal runaway that can lead to fire and explosion. As packaging for some applications include a large number of cells, the risk of failure is likely to be magnified. To address concerns about the safety of battery powered products, safety standards have been developed. This paper provides a review of various international safety standards specific to lithium-ion cells. This paper shows that though the standards are harmonized on a host of abuse conditions, most lack a test simulating internal short circuits. This paper describes some efforts to introduce internal short circuit tests into safety standards.

Nigerian pharmacists’ self-perceived competence and confidence to plan and conduct pharmacy practice research

PubMed Central

Usman, Mohammad N.; Umar, Muhammad D.

2018-01-01

Background: Recent studies have revealed that pharmacists have interest in conducting research. However, lack of confidence is a major barrier. Objective: This study evaluated pharmacists’ self-perceived competence and confidence to plan and conduct health-related research. Method: This cross sectional study was conducted during the 89th Annual National Conference of the Pharmaceutical Society of Nigeria in November 2016. An adapted questionnaire was validated and administered to 200 pharmacist delegates during the conference. Result: Overall, 127 questionnaires were included in the analysis. At least 80% of the pharmacists had previous health-related research experience. Pharmacist’s competence and confidence scores were lowest for research skills such as: using software for statistical analysis, choosing and applying appropriate inferential statistical test and method, and outlining detailed statistical plan to be used in data analysis. Highest competence and confidence scores were observed for conception of research idea, literature search and critical appraisal of literature. Pharmacists with previous research experience had higher competence and confidence scores than those with no previous research experience (p<0.05). The only predictor of moderate-to-extreme self-competence and confidence was having at least one journal article publication during the last 5 years. Conclusion: Nigerian pharmacists indicated interest to participate in health-related research. However, self-competence and confidence to plan and conduct research were low. This was particularly so for skills related to statistical analysis. Training programs and building of Pharmacy Practice Research Network are recommended to enhance pharmacist’s research capacity. PMID:29619141

Recognizing nurse stakeholder dissonance as a critical determinant of patient safety in new healthcare information technologies.

PubMed

Samaras, Elizabeth A; Real, Sara D; Curtis, Amber M; Meunier, Tessa S

2012-01-01

Proper identification of all stakeholders and the comprehensive assessment of their evolving and often conflicting Needs, Wants, and Desires (NWDs) is a fundamental principle of human factors science and human-centered systems engineering; it is not yet a consistent element in development and deployment of new health information technologies (HIT). As the single largest group of healthcare professionals, nurses are critical stakeholders for these new technologies. Careful analysis can reveal nurse stakeholder dissonance (NSD) when integrating new technologies into the healthcare environment. Stakeholder dissonance is a term that describes the conflict between the NWDs of different stakeholders which, if left unresolved, can result in dissatisfaction, workarounds, errors, and threats to patient safety. Three case studies drawn from the authors' experience in a variety of acute-care settings where new HITs have been recently deployed are examined to illustrate the concept of NSD. Conflicting NWDs, other stakeholders, and possible root causes of the NSD are analyzed and mapped to threats to patient safety. Lessons learned, practical guidance for anticipating, identifying, and mitigating NSD, future research and implications for HFE and nursing practice are discussed.

There is more to risk and safety planning than dramatic risks: Mental health nurses' risk assessment and safety-management practice.

PubMed

Higgins, Agnes; Doyle, Louise; Downes, Carmel; Morrissey, Jean; Costello, Paul; Brennan, Michael; Nash, Michael

2016-04-01

Risk assessment and safety planning are considered a cornerstone of mental health practice, yet limited research exists into how mental health nurses conceptualize 'risk' and how they engage with risk assessment and safety planning. The aim of the present study was to explore mental health nurses' practices and confidence in risk assessment and safety planning. A self-completed survey was administered to 381 mental health nurses in Ireland. The findings indicate that nurses focus on risk to self and risk to others, with the risk of suicide, self-harm, substance abuse, and violence being most frequently assessed. Risk from others and 'iatrogenic' risk were less frequently considered. Overall, there was limited evidence of recovery-oriented practice in relation to risk. The results demonstrate a lack of meaningful engagement with respect to collaborative safety planning, the identification and inclusion of protective factors, and the inclusion of positive risk-taking opportunities. In addition, respondents report a lack of confidence working with positive risk taking and involving family/carers in the risk-assessment and safety-planning process. Gaps in knowledge about risk-assessment and safety-planning practice, which could be addressed through education, are identified, as are the implications of the findings for practice and research. © 2015 Australian College of Mental Health Nurses Inc.

Labor unions and safety climate: perceived union safety values and retail employee safety outcomes.

PubMed

Sinclair, Robert R; Martin, James E; Sears, Lindsay E

2010-09-01

Although trade unions have long been recognized as a critical advocate for employee safety and health, safety climate research has not paid much attention to the role unions play in workplace safety. We proposed a multiple constituency model of workplace safety which focused on three central safety stakeholders: top management, ones' immediate supervisor, and the labor union. Safety climate research focuses on management and supervisors as key stakeholders, but has not considered whether employee perceptions about the priority their union places on safety contributes contribute to safety outcomes. We addressed this gap in the literature by investigating unionized retail employee (N=535) perceptions about the extent to which their top management, immediate supervisors, and union valued safety. Confirmatory factor analyses demonstrated that perceived union safety values could be distinguished from measures of safety training, workplace hazards, top management safety values, and supervisor values. Structural equation analyses indicated that union safety values influenced safety outcomes through its association with higher safety motivation, showing a similar effect as that of supervisor safety values. These findings highlight the need for further attention to union-focused measures related to workplace safety as well as further study of retail employees in general. We discuss the practical implications of our findings and identify several directions for future safety research. 2009 Elsevier Ltd. All rights reserved.

Technology and Tool Development to Support Safety and Mission Assurance

NASA Technical Reports Server (NTRS)

Denney, Ewen; Pai, Ganesh

2017-01-01

The Assurance Case approach is being adopted in a number of safety-mission-critical application domains in the U.S., e.g., medical devices, defense aviation, automotive systems, and, lately, civil aviation. This paradigm refocuses traditional, process-based approaches to assurance on demonstrating explicitly stated assurance goals, emphasizing the use of structured rationale, and concrete product-based evidence as the means for providing justified confidence that systems and software are fit for purpose in safely achieving mission objectives. NASA has also been embracing assurance cases through the concepts of Risk Informed Safety Cases (RISCs), as documented in the NASA System Safety Handbook, and Objective Hierarchies (OHs) as put forth by the Agency's Office of Safety and Mission Assurance (OSMA). This talk will give an overview of the work being performed by the SGT team located at NASA Ames Research Center, in developing technologies and tools to engineer and apply assurance cases in customer projects pertaining to aviation safety. We elaborate how our Assurance Case Automation Toolset (AdvoCATE) has not only extended the state-of-the-art in assurance case research, but also demonstrated its practical utility. We have successfully developed safety assurance cases for a number of Unmanned Aircraft Systems (UAS) operations, which underwent, and passed, scrutiny both by the aviation regulator, i.e., the FAA, as well as the applicable NASA boards for airworthiness and flight safety, flight readiness, and mission readiness. We discuss our efforts in expanding AdvoCATE capabilities to support RISCs and OHs under a project recently funded by OSMA under its Software Assurance Research Program. Finally, we speculate on the applicability of our innovations beyond aviation safety to such endeavors as robotic, and human spaceflight.

Does the concept of safety culture help or hinder systems thinking in safety?

PubMed

Reiman, Teemu; Rollenhagen, Carl

2014-07-01

The concept of safety culture has become established in safety management applications in all major safety-critical domains. The idea that safety culture somehow represents a "systemic view" on safety is seldom explicitly spoken out, but nevertheless seem to linger behind many safety culture discourses. However, in this paper we argue that the "new" contribution to safety management from safety culture never really became integrated with classical engineering principles and concepts. This integration would have been necessary for the development of a more genuine systems-oriented view on safety; e.g. a conception of safety in which human, technological, organisational and cultural factors are understood as mutually interacting elements. Without of this integration, researchers and the users of the various tools and methods associated with safety culture have sometimes fostered a belief that "safety culture" in fact represents such a systemic view about safety. This belief is, however, not backed up by theoretical or empirical evidence. It is true that safety culture, at least in some sense, represents a holistic term-a totality of factors that include human, organisational and technological aspects. However, the departure for such safety culture models is still human and organisational factors rather than technology (or safety) itself. The aim of this paper is to critically review the various uses of the concept of safety culture as representing a systemic view on safety. The article will take a look at the concepts of culture and safety culture based on previous studies, and outlines in more detail the theoretical challenges in safety culture as a systems concept. The paper also presents recommendations on how to make safety culture more systemic. Copyright © 2013 Elsevier Ltd. All rights reserved.

A model for developing disability confidence.

PubMed

Lindsay, Sally; Cancelliere, Sara

2017-05-15

Many clinicians, educators, and employers lack disability confidence which can affect their interactions with, and inclusion of people with disabilities. Our objective was to explore how disability confidence developed among youth who volunteered with children who have a disability. We conducted 30 in-depth interviews (16 without a disability, 14 with disabilities), with youth aged 15-25. We analyzed our data using an interpretive, qualitative, thematic approach. We identified four main themes that led to the progression of disability confidence including: (1) "disability discomfort," referring to lacking knowledge about disability and experiencing unease around people with disabilities; (2) "reaching beyond comfort zone" where participants increased their understanding of disability and became sensitized to difference; (3) "broadened perspectives" where youth gained exposure to people with disabilities and challenged common misperceptions and stereotypes; and (4) "disability confidence" which includes having knowledge of people with disabilities, inclusive, and positive attitudes towards them. Volunteering is one way that can help to develop disability confidence. Youth with and without disabilities both reported a similar process of developing disability confidence; however, there were nuances between the two groups. Implications for Rehabilitation The development of disability confidence is important for enhancing the social inclusion of people with disabilities. Volunteering with people who have a disability, or a disability different from their own, can help to develop disability confidence which involves positive attitudes, empathy, and appropriate communication skills. Clinicians, educators, and employers should consider promoting working with disabled people through such avenues as volunteering or service learning to gain disability confidence.

Real-world aspects of the nuclear criticality safety program at the University of Tennessee-Knoxville

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bentley, C.L.; Dunn, M.E.; Goluoglu, S.

1996-12-31

The nuclear criticality safety (NCS) program at the University of Tennessee-Knoxville (UTK) emphasizes the {open_quotes}real world{close_quotes} in the NCS courses that are offered and also the NCS research that is conducted. Two NCS courses are offered at UTK. The first course is an introduction to the NCS field, which uses the text by Knief and includes an overview of criticality accidents that have actually happened, standards that are currently in use and being developed, and state-of-the-art computer methods and codes. The students learn the same codes, including both theory and application, that are used by most professionals in the NCSmore » field. Thus, if a student accepts a job offer in the NCS area after graduation, he or she is capable of doing productive NCS work the first day on the job. Subcritical limits, hand-calculation methods, current regulations [both U.S. Department of Energy (DOE) and U.S. Nuclear Regulatory Commission (NRC)] and current practices are also discussed in the introductory course. The second course emphasizes real world experience and is taught by five instructors with over 100 years of combined experience.« less

Criticality Safety Evaluation Report CSER-96-019 for Spent Nuclear Fuel (SNF) Processing and Storage Facilities Multi Canister Overpack (MCO)

DOE Office of Scientific and Technical Information (OSTI.GOV)

KESSLER, S.F.

This criticality evaluation is for Spent N Reactor fuel unloaded from the existing canisters in both KE and KW Basins, and loaded into multiple canister overpack (MCO) containers with specially built baskets containing a maximum of either 54 Mark IV or 48 Mark IA fuel assemblies. The criticality evaluations include loading baskets into the cask-MCO, operation at the Cold Vacuum Drying Facility,a nd storage in the Canister Storage Building. Many conservatisms have been built into this analysis, the primary one being the selection of the K{sub eff} = 0.95 criticality safety limit. This revision incorporates the analyses for the sampling/weldmore » station in the Canister Storage Building and additional analysis of the MCO during the draining at CVDF. Additional discussion of the scrap basket model was added to show why the addition of copper divider plates was not included in the models.« less

Selecting an Architecture for a Safety-Critical Distributed Computer System with Power, Weight and Cost Considerations

NASA Technical Reports Server (NTRS)

Torres-Pomales, Wilfredo

2014-01-01

This report presents an example of the application of multi-criteria decision analysis to the selection of an architecture for a safety-critical distributed computer system. The design problem includes constraints on minimum system availability and integrity, and the decision is based on the optimal balance of power, weight and cost. The analysis process includes the generation of alternative architectures, evaluation of individual decision criteria, and the selection of an alternative based on overall value. In this example presented here, iterative application of the quantitative evaluation process made it possible to deliberately generate an alternative architecture that is superior to all others regardless of the relative importance of cost.

Automated Translation of Safety Critical Application Software Specifications into PLC Ladder Logic

NASA Technical Reports Server (NTRS)

Leucht, Kurt W.; Semmel, Glenn S.

2008-01-01

The numerous benefits of automatic application code generation are widely accepted within the software engineering community. A few of these benefits include raising the abstraction level of application programming, shorter product development time, lower maintenance costs, and increased code quality and consistency. Surprisingly, code generation concepts have not yet found wide acceptance and use in the field of programmable logic controller (PLC) software development. Software engineers at the NASA Kennedy Space Center (KSC) recognized the need for PLC code generation while developing their new ground checkout and launch processing system. They developed a process and a prototype software tool that automatically translates a high-level representation or specification of safety critical application software into ladder logic that executes on a PLC. This process and tool are expected to increase the reliability of the PLC code over that which is written manually, and may even lower life-cycle costs and shorten the development schedule of the new control system at KSC. This paper examines the problem domain and discusses the process and software tool that were prototyped by the KSC software engineers.

Assuring safety without animal testing: Unilever's ongoing research programme to deliver novel ways to assure consumer safety.

PubMed

Westmoreland, Carl; Carmichael, Paul; Dent, Matt; Fentem, Julia; MacKay, Cameron; Maxwell, Gavin; Pease, Camilla; Reynolds, Fiona

2010-01-01

Assuring consumer safety without the generation of new animal data is currently a considerable challenge. However, through the application of new technologies and the further development of risk-based approaches for safety assessment, we remain confident it is ultimately achievable. For many complex, multi-organ consumer safety endpoints, the development, evaluation and application of new, non-animal approaches is hampered by a lack of biological understanding of the underlying mechanistic processes involved. The enormity of this scientific challenge should not be underestimated. To tackle this challenge a substantial research programme was initiated by Unilever in 2004 to critically evaluate the feasibility of a new conceptual approach based upon the following key components: 1.Developing new, exposure-driven risk assessment approaches. 2.Developing new biological (in vitro) and computer-based (in silico) predictive models. 3.Evaluating the applicability of new technologies for generating data (e.g. "omics", informatics) and for integrating new types of data (e.g. systems approaches) for risk-based safety assessment. Our research efforts are focussed in the priority areas of skin allergy, cancer and general toxicity (including inhaled toxicity). In all of these areas, a long-term investment is essential to increase the scientific understanding of the underlying biology and molecular mechanisms that we believe will ultimately form a sound basis for novel risk assessment approaches. Our research programme in these priority areas consists of in-house research as well as Unilever-sponsored academic research, involvement in EU-funded projects (e.g. Sens-it-iv, Carcinogenomics), participation in cross-industry collaborative research (e.g. Colipa, EPAA) and ongoing involvement with other scientific initiatives on non-animal approaches to risk assessment (e.g. UK NC3Rs, US "Human Toxicology Project" consortium).

An Approach for Validating Actinide and Fission Product Burnup Credit Criticality Safety Analyses-Isotopic Composition Predictions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Radulescu, Georgeta; Gauld, Ian C; Ilas, Germina

2011-01-01

The expanded use of burnup credit in the United States (U.S.) for storage and transport casks, particularly in the acceptance of credit for fission products, has been constrained by the availability of experimental fission product data to support code validation. The U.S. Nuclear Regulatory Commission (NRC) staff has noted that the rationale for restricting the Interim Staff Guidance on burnup credit for storage and transportation casks (ISG-8) to actinide-only is based largely on the lack of clear, definitive experiments that can be used to estimate the bias and uncertainty for computational analyses associated with using burnup credit. To address themore » issues of burnup credit criticality validation, the NRC initiated a project with the Oak Ridge National Laboratory to (1) develop and establish a technically sound validation approach for commercial spent nuclear fuel (SNF) criticality safety evaluations based on best-available data and methods and (2) apply the approach for representative SNF storage and transport configurations/conditions to demonstrate its usage and applicability, as well as to provide reference bias results. The purpose of this paper is to describe the isotopic composition (depletion) validation approach and resulting observations and recommendations. Validation of the criticality calculations is addressed in a companion paper at this conference. For isotopic composition validation, the approach is to determine burnup-dependent bias and uncertainty in the effective neutron multiplication factor (keff) due to bias and uncertainty in isotopic predictions, via comparisons of isotopic composition predictions (calculated) and measured isotopic compositions from destructive radiochemical assay utilizing as much assay data as is available, and a best-estimate Monte Carlo based method. This paper (1) provides a detailed description of the burnup credit isotopic validation approach and its technical bases, (2) describes the application of the

Time-varying associations between confidence and motivation to abstain from marijuana during treatment among adolescents

PubMed Central

Chung, Tammy; Maisto, Stephen A.

2016-01-01

Introduction An important goal of addictions treatment is to develop a positive association between high levels of confidence and motivation to abstain from substance use. This study modeled the time-varying association between confidence and motivation to abstain from marijuana use among youth in treatment, and the time-varying effect of pre-treatment covariates (marijuana abstinence goal and perceived peer marijuana use) on motivation to abstain. Method 150 adolescents (75% male, 83% White) in community-based intensive outpatient treatment in Pennsylvania completed a pre-treatment assessment of abstinence goal, perceived peer marijuana use, and motivation and confidence to abstain from marijuana. Ratings of motivation and confidence to abstain also were collected after each session. A Time-Varying Effect Model (TVEM) was used to characterize changes in the association between confidence and motivation to abstain (lagged), and included covariates representing pre-treatment abstinence goal and perceived peer marijuana use. Results Confidence and motivation to abstain from marijuana generally increased during treatment. The association between confidence and motivation strengthened across sessions 1-4, and was maintained through later sessions. Pre-treatment abstinence goal had an early time-limited effect (through session 6) on motivation to abstain. Pre-treatment perception of peer marijuana use had a significant effect on motivation to abstain only at session 2. Conclusions Early treatment sessions represent a critical period during which the association between confidence and motivation to abstain generally increased. The time-limited effects of pre-treatment characteristics suggest the importance of early sessions in addressing abstinence goal and peer substance use that may impact motivation to abstain from marijuana. PMID:26894550

Time-varying associations between confidence and motivation to abstain from marijuana during treatment among adolescents.

PubMed

Chung, Tammy; Maisto, Stephen A

2016-06-01

An important goal of addictions treatment is to develop a positive association between high levels of confidence and motivation to abstain from substance use. This study modeled the time-varying association between confidence and motivation to abstain from marijuana use among youth in treatment, and the time-varying effect of pre-treatment covariates (marijuana abstinence goal and perceived peer marijuana use) on motivation to abstain. 150 adolescents (75% male, 83% White) in community-based intensive outpatient treatment in Pennsylvania completed a pre-treatment assessment of abstinence goal, perceived peer marijuana use, and motivation and confidence to abstain from marijuana. Ratings of motivation and confidence to abstain also were collected after each session. A time-varying effect model (TVEM) was used to characterize changes in the association between confidence and motivation to abstain (lagged), and included covariates representing pre-treatment abstinence goal and perceived peer marijuana use. Confidence and motivation to abstain from marijuana generally increased during treatment. The association between confidence and motivation strengthened across sessions 1-4, and was maintained through later sessions. Pre-treatment abstinence goal had an early time-limited effect (through session 6) on motivation to abstain. Pre-treatment perception of peer marijuana use had a significant effect on motivation to abstain only at session 2. Early treatment sessions represent a critical period during which the association between confidence and motivation to abstain generally increased. The time-limited effects of pre-treatment characteristics suggest the importance of early sessions in addressing abstinence goal and peer substance use that may impact motivation to abstain from marijuana. Copyright © 2016 Elsevier Ltd. All rights reserved.

Identification of safety-critical events using kinematic vehicle data and the discrete fourier transform.

PubMed

Kluger, Robert; Smith, Brian L; Park, Hyungjun; Dailey, Daniel J

2016-11-01

Recent technological advances have made it both feasible and practical to identify unsafe driving behaviors using second-by-second trajectory data. Presented in this paper is a unique approach to detecting safety-critical events using vehicles' longitudinal accelerations. A Discrete Fourier Transform is used in combination with K-means clustering to flag patterns in the vehicles' accelerations in time-series that are likely to be crashes or near-crashes. The algorithm was able to detect roughly 78% of crasjavascript:void(0)hes and near-crashes (71 out of 91 validated events in the Naturalistic Driving Study data used), while generating about 1 false positive every 2.7h. In addition to presenting the promising results, an implementation strategy is discussed and further research topics that can improve this method are suggested in the paper. Copyright © 2016 Elsevier Ltd. All rights reserved.

Priming patient safety: A middle-range theory of safety goal priming via safety culture communication.

PubMed

Groves, Patricia S; Bunch, Jacinda L

2018-05-18

The aim of this paper is discussion of a new middle-range theory of patient safety goal priming via safety culture communication. Bedside nurses are key to safe care, but there is little theory about how organizations can influence nursing behavior through safety culture to improve patient safety outcomes. We theorize patient safety goal priming via safety culture communication may support organizations in this endeavor. According to this theory, hospital safety culture communication activates a previously held patient safety goal and increases the perceived value of actions nurses can take to achieve that goal. Nurses subsequently prioritize and are motivated to perform tasks and risk assessment related to achieving patient safety. These efforts continue until nurses mitigate or ameliorate identified risks and hazards during the patient care encounter. Critically, this process requires nurses to have a previously held safety goal associated with a repertoire of appropriate actions. This theory suggests undergraduate educators should foster an outcomes focus emphasizing the connections between nursing interventions and safety outcomes, hospitals should strategically structure patient safety primes into communicative activities, and organizations should support professional development including new skills and the latest evidence supporting nursing practice for patient safety. © 2018 John Wiley & Sons Ltd.

[Sources of leader's confidence in organizations].

PubMed

Ikeda, Hiroshi; Furukawa, Hisataka

2006-04-01

The purpose of this study was to examine the sources of confidence that organization leaders had. As potential sources of the confidence, we focused on fulfillment of expectations made by self and others, reflection on good as well as bad job experiences, and awareness of job experiences in terms of commonality, differentiation, and multiple viewpoints. A questionnaire was administered to 170 managers of Japanese companies. Results were as follows: First, confidence in leaders was more strongly related to fulfillment of expectations made by self and others than reflection on and awareness of job experiences. Second, the confidence was weakly related to internal processing of job experiences, in the form of commonality awareness and reflection on good job experiences. And finally, years of managerial experiences had almost no relation to the confidence. These findings suggested that confidence in leaders was directly acquired from fulfillment of expectations made by self and others, rather than indirectly through internal processing of job experiences. Implications of the findings for leadership training were also discussed.

Motor vehicle occupant safety survey

DOT National Transportation Integrated Search

1995-09-01

This report presents findings from the first Motor Vehicle Occupant Safety Survey. The National Highway Traffic Safety Administration (NHTSA) conducted this survey to collect critical information needed by the agency to develop and implement effectiv...

Analyzing Software Errors in Safety-Critical Embedded Systems

NASA Technical Reports Server (NTRS)

Lutz, Robyn R.

1994-01-01

This paper analyzes the root causes of safty-related software faults identified as potentially hazardous to the system are distributed somewhat differently over the set of possible error causes than non-safety-related software faults.

10 CFR 76.89 - Criticality accident requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 2 2011-01-01 2011-01-01 false Criticality accident requirements. 76.89 Section 76.89 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.89 Criticality accident requirements. (a) The Corporation must maintain and operate a criticality monitoring and...

10 CFR 76.89 - Criticality accident requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 2 2014-01-01 2014-01-01 false Criticality accident requirements. 76.89 Section 76.89 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.89 Criticality accident requirements. (a) The Corporation must maintain and operate a criticality monitoring and...

10 CFR 76.89 - Criticality accident requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 2 2013-01-01 2013-01-01 false Criticality accident requirements. 76.89 Section 76.89 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.89 Criticality accident requirements. (a) The Corporation must maintain and operate a criticality monitoring and...

10 CFR 76.89 - Criticality accident requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 2 2012-01-01 2012-01-01 false Criticality accident requirements. 76.89 Section 76.89 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.89 Criticality accident requirements. (a) The Corporation must maintain and operate a criticality monitoring and...

10 CFR 76.89 - Criticality accident requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Criticality accident requirements. 76.89 Section 76.89 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.89 Criticality accident requirements. (a) The Corporation must maintain and operate a criticality monitoring and...

Minimizing Disparities and Developing Support by Identifying Differences in Confidence and Knowledge Related to Water Issues

ERIC Educational Resources Information Center

Taylor, Melissa; Lamm, Alexa J.

2016-01-01

Extension educators face challenges as they strive to keep up with critical issues in their communities, such as those surrounding water. A growing population and a diminishing water supply necessitate that Florida residents become more knowledgeable about water issues. We conducted research to determine how confident both the general public and…

Confidence-Building Measures in Philippine Security.

DTIC Science & Technology

1998-05-01

service or government agency. STRATEGY RESEARCH PROJECT i CONFIDENCE-BUILDING MEASURES IN PHILIPPINE SECURITY BY LIEUTENANT COLONEL RAMON G...WAR COLLEGE, CARLISLE BARRACKS, PA 17013-5050 rimo*’^»®*raBl USAWC STRATEGY RESEARCH PROJECT CONFIDENCE-BUILDING MEASURES IN PHILIPPINE...Colonel Ramon Santos, Philippine Army TITLE: Confidence-Building Measures in Philippine Security FORMAT: Strategy Research Project DATE: 1

A Human Reliability Based Usability Evaluation Method for Safety-Critical Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Phillippe Palanque; Regina Bernhaupt; Ronald Boring

2006-04-01

Recent years have seen an increasing use of sophisticated interaction techniques including in the field of safety critical interactive software [8]. The use of such techniques has been required in order to increase the bandwidth between the users and systems and thus to help them deal efficiently with increasingly complex systems. These techniques come from research and innovation done in the field of humancomputer interaction (HCI). A significant effort is currently being undertaken by the HCI community in order to apply and extend current usability evaluation techniques to these new kinds of interaction techniques. However, very little has been donemore » to improve the reliability of software offering these kinds of interaction techniques. Even testing basic graphical user interfaces remains a challenge that has rarely been addressed in the field of software engineering [9]. However, the non reliability of interactive software can jeopardize usability evaluation by showing unexpected or undesired behaviors. The aim of this SIG is to provide a forum for both researchers and practitioners interested in testing interactive software. Our goal is to define a roadmap of activities to cross fertilize usability and reliability testing of these kinds of systems to minimize duplicate efforts in both communities.« less

On-line confidence monitoring during decision making.

PubMed

Dotan, Dror; Meyniel, Florent; Dehaene, Stanislas

2018-02-01

Humans can readily assess their degree of confidence in their decisions. Two models of confidence computation have been proposed: post hoc computation using post-decision variables and heuristics, versus online computation using continuous assessment of evidence throughout the decision-making process. Here, we arbitrate between these theories by continuously monitoring finger movements during a manual sequential decision-making task. Analysis of finger kinematics indicated that subjects kept separate online records of evidence and confidence: finger deviation continuously reflected the ongoing accumulation of evidence, whereas finger speed continuously reflected the momentary degree of confidence. Furthermore, end-of-trial finger speed predicted the post-decisional subjective confidence rating. These data indicate that confidence is computed on-line, throughout the decision process. Speed-confidence correlations were previously interpreted as a post-decision heuristics, whereby slow decisions decrease subjective confidence, but our results suggest an adaptive mechanism that involves the opposite causality: by slowing down when unconfident, participants gain time to improve their decisions. Copyright © 2017 Elsevier B.V. All rights reserved.

Patient Drug Safety Reporting: Diabetes Patients' Perceptions of Drug Safety and How to Improve Reporting of Adverse Events and Product Complaints.

PubMed

Patel, Puja; Spears, David; Eriksen, Betina Østergaard; Lollike, Karsten; Sacco, Michael

2018-03-01

Global health care manufacturer Novo Nordisk commissioned research regarding awareness of drug safety department activities and potential to increase patient feedback. Objectives were to examine patients' knowledge of pharmaceutical manufacturers' responsibilities and efforts regarding drug safety, their perceptions and experiences related to these efforts, and how these factors influence their thoughts and behaviors. Data were collected before and after respondents read a description of a drug safety department and its practices. We conducted quantitative survey research across 608 health care consumers receiving treatment for diabetes in the United States, Germany, United Kingdom, and Italy. This research validated initial, exploratory qualitative research (across 40 comparable consumers from the same countries) which served to guide design of the larger study. Before reading a drug safety department description, 55% of respondents were unaware these departments collect safety information on products and patients. After reading the description, 34% reported the department does more than they expected to ensure drug safety, and 56% reported "more confidence" in the industry as a whole. Further, 66% reported themselves more likely to report an adverse event or product complaint, and 60% reported that they were more likely to contact a drug safety department with questions. The most preferred communication methods were websites/online forums (39%), email (27%), and telephone (25%). Learning about drug safety departments elevates consumers' confidence in manufacturers' safety efforts and establishes potential for patients to engage in increased self-monitoring and reporting. Study results reveal potentially actionable insights for the industry across patient and physician programs and communications.

Quantifying Vermont transportation safety factors.

DOT National Transportation Integrated Search

2010-01-01

VTrans and its partners have selected traffic safety : priority areas in their Strategic Highway Safety Plan. : In this project, researchers focus on three of these : prioritized critical emphasis areas: 1) Keeping vehicles : on the roadway, 2) Young...

Management commitment to safety as organizational support: relationships with non-safety outcomes in wood manufacturing employees

Treesearch

Judd H. Michael; Demetrice D. Evans; Karen J. Jansen; Joel M. Haight

2005-01-01

Employee perceptions of management commitment to safety are known to influence important safety-related outcomes. However, little work has been conducted to explore nonsafety-related outcomes resulting from a commitment to safety. Method: Employee-level outcomes critical to the effective functioning of an organization, including attitudes such as job...

A method for identifying EMI critical circuits during development of a large C3

NASA Astrophysics Data System (ADS)

Barr, Douglas H.

The circuit analysis methods and process Boeing Aerospace used on a large, ground-based military command, control, and communications (C3) system are described. This analysis was designed to help identify electromagnetic interference (EMI) critical circuits. The methodology used the MIL-E-6051 equipment criticality categories as the basis for defining critical circuits, relational database technology to help sort through and account for all of the approximately 5000 system signal cables, and Macintosh Plus personal computers to predict critical circuits based on safety margin analysis. The EMI circuit analysis process systematically examined all system circuits to identify which ones were likely to be EMI critical. The process used two separate, sequential safety margin analyses to identify critical circuits (conservative safety margin analysis, and detailed safety margin analysis). These analyses used field-to-wire and wire-to-wire coupling models using both worst-case and detailed circuit parameters (physical and electrical) to predict circuit safety margins. This process identified the predicted critical circuits that could then be verified by test.

Reliability and Confidence Interval Analysis of a CMC Turbine Stator Vane

NASA Technical Reports Server (NTRS)

Murthy, Pappu L. N.; Gyekenyesi, John P.; Mital, Subodh K.

2008-01-01

an economical manner. The methods to accurately determine the service life of an engine component with associated variability have become increasingly difficult. This results, in part, from the complex missions which are now routinely considered during the design process. These missions include large variations of multi-axial stresses and temperatures experienced by critical engine parts. There is a need for a convenient design tool that can accommodate various loading conditions induced by engine operating environments, and material data with their associated uncertainties to estimate the minimum predicted life of a structural component. A probabilistic composite micromechanics technique in combination with woven composite micromechanics, structural analysis and Fast Probability Integration (FPI) techniques has been used to evaluate the maximum stress and its probabilistic distribution in a CMC turbine stator vane. Furthermore, input variables causing scatter are identified and ranked based upon their sensitivity magnitude. Since the measured data for the ceramic matrix composite properties is very limited, obtaining a probabilistic distribution with their corresponding parameters is difficult. In case of limited data, confidence bounds are essential to quantify the uncertainty associated with the distribution. Usually 90 and 95% confidence intervals are computed for material properties. Failure properties are then computed with the confidence bounds. Best estimates and the confidence bounds on the best estimate of the cumulative probability function for R-S (strength - stress) are plotted. The methodologies and the results from these analyses will be discussed in the presentation.

Sample size, confidence, and contingency judgement.

PubMed

Clément, Mélanie; Mercier, Pierre; Pastò, Luigi

2002-06-01

According to statistical models, the acquisition function of contingency judgement is due to confidence increasing with sample size. According to associative models, the function reflects the accumulation of associative strength on which the judgement is based. Which view is right? Thirty university students assessed the relation between a fictitious medication and a symptom of skin discoloration in conditions that varied sample size (4, 6, 8 or 40 trials) and contingency (delta P = .20, .40, .60 or .80). Confidence was also collected. Contingency judgement was lower for smaller samples, while confidence level correlated inversely with sample size. This dissociation between contingency judgement and confidence contradicts the statistical perspective.

Interprofessional teaching project with nursing and physical therapy students to promote caregiver and patient safety.

PubMed

von der Lancken, Shelley; Levenhagen, Kim

2014-12-01

Nurse educators must adjust curricula to meet the dynamic and critical changes in the health care environment, and to recognize the risk of injury our educational approach has on safety, team effectiveness, and culture change. Interprofessional collaboration and simulation are key components in the preparation of our students. Utilizing the interprofessional alliance model, an experience to promote collaborative relationships among nursing and physical therapy (PT) students to improve patient and caregiver safety was developed. Through this model, PT students taught safe patient-handling skills in a simulated setting to undergraduate nursing students. The majority of nursing students (N=351) from 2009–2014 strongly agreed or agreed that they were confident in the skills taught by the PT students and provided an overall course rating of outstanding or above average. This educational model, which includes simulation and safe patient handling, was a valuable addition to the curriculum, reinforcing the significance of developing collaborative relationships. Copyright 2014, SLACK Incorporated.

76 FR 71081 - Public Aircraft Oversight Safety Forum

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-16

... NATIONAL TRANSPORTATION SAFETY BOARD Public Aircraft Oversight Safety Forum The National Transportation Safety Board (NTSB) will convene a Public Aircraft Oversight Safety Forum which will begin at 9 a... ``Public Aircraft Oversight Forum: Ensuring Safety for Critical Missions'', are to (1) raise awareness of...

The Effect of Adaptive Confidence Strategies in Computer-Assisted Instruction on Learning and Learner Confidence

ERIC Educational Resources Information Center

Warren, Richard Daniel

2012-01-01

The purpose of this research was to investigate the effects of including adaptive confidence strategies in instructionally sound computer-assisted instruction (CAI) on learning and learner confidence. Seventy-one general educational development (GED) learners recruited from various GED learning centers at community colleges in the southeast United…

Development of a multimedia tutorial to educate how to assess the critical view of safety in laparoscopic cholecystectomy using expert review and crowd-sourcing.

PubMed

Deal, Shanley B; Stefanidis, Dimitrios; Brunt, L Michael; Alseidi, Adnan

2017-05-01

We sought to determine the feasibility of developing a multimedia educational tutorial to teach learners to assess the critical view of safety using input from expert surgeons, non-surgeons and crowd-sourcing. We intended to develop a tutorial that would teach learners how to identify the basic anatomy and physiology of the gallbladder, identify the components of the critical view of safety criteria, and understand its significance for performing a safe gallbladder removal. Using rounds of assessment with experts, laypersons and crowd-workers we developed an educational video with improving comprehension after each round of revision. We demonstrate that the development of a multimedia educational tool to educate learners of various backgrounds is feasible using an iterative review process that incorporates the input of experts and crowd sourcing. When planning the development of an educational tutorial, a step-wise approach as described herein should be considered. Copyright © 2017 Elsevier Inc. All rights reserved.

14 CFR 35.16 - Propeller critical parts.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Propeller critical parts. 35.16 Section 35... AIRWORTHINESS STANDARDS: PROPELLERS Design and Construction § 35.16 Propeller critical parts. The integrity of each propeller critical part identified by the safety analysis required by § 35.15 must be established...

Decoded fMRI neurofeedback can induce bidirectional confidence changes within single participants

PubMed Central

Cortese, Aurelio; Amano, Kaoru; Koizumi, Ai; Lau, Hakwan; Kawato, Mitsuo

2017-01-01

Neurofeedback studies using real-time functional magnetic resonance imaging (rt-fMRI) have recently incorporated the multi-voxel pattern decoding approach, allowing for fMRI to serve as a tool to manipulate fine-grained neural activity embedded in voxel patterns. Because of its tremendous potential for clinical applications, certain questions regarding decoded neurofeedback (DecNef) must be addressed. Specifically, can the same participants learn to induce neural patterns in opposite directions in different sessions? If so, how does previous learning affect subsequent induction effectiveness? These questions are critical because neurofeedback effects can last for months, but the short- to mid-term dynamics of such effects are unknown. Here we employed a within-subjects design, where participants underwent two DecNef training sessions to induce behavioural changes of opposing directionality (up or down regulation of perceptual confidence in a visual discrimination task), with the order of training counterbalanced across participants. Behavioral results indicated that the manipulation was strongly influenced by the order and the directionality of neurofeedback training. We applied nonlinear mathematical modeling to parametrize four main consequences of DecNef: main effect of change in confidence, strength of down-regulation of confidence relative to up-regulation, maintenance of learning effects, and anterograde learning interference. Modeling results revealed that DecNef successfully induced bidirectional confidence changes in different sessions within single participants. Furthermore, the effect of up- compared to down-regulation was more prominent, and confidence changes (regardless of the direction) were largely preserved even after a week-long interval. Lastly, the effect of the second session was markedly diminished as compared to the effect of the first session, indicating strong anterograde learning interference. These results are interpreted in the framework

Learning from error: leading a culture of safety.

PubMed

Gibson, Russell; Armstrong, Alexander; Till, Alex; McKimm, Judy

2017-07-02

A recent shift towards more collective leadership in the NHS can help to achieve a culture of safety, particularly through encouraging frontline staff to participate and take responsibility for improving safety through learning from error and near misses. Leaders must ensure that they provide psychological safety, organizational fairness and learning systems for staff to feel confident in raising concerns, that they have the autonomy and skills to lead continual improvement, and that they have responsibility for spreading this learning within and across organizations.

Car manufacturers and global road safety: a word frequency analysis of road safety documents.

PubMed

Roberts, I; Wentz, R; Edwards, P

2006-10-01

The World Bank believes that the car manufacturers can make a valuable contribution to road safety in poor countries and has established the Global Road Safety Partnership (GRSP) for this purpose. However, some commentators are sceptical. The authors examined road safety policy documents to assess the extent of any bias. Word frequency analyses of road safety policy documents from the World Health Organization (WHO) and the GRSP. The relative occurrence of key road safety terms was quantified by calculating a word prevalence ratio with 95% confidence intervals. Terms for which there was a fourfold difference in prevalence between the documents were tabulated. Compared to WHO's World report on road traffic injury prevention, the GRSP road safety documents were substantially less likely to use the words speed, speed limits, child restraint, pedestrian, public transport, walking, and cycling, but substantially more likely to use the words school, campaign, driver training, and billboard. There are important differences in emphasis in road safety policy documents prepared by WHO and the GRSP. Vigilance is needed to ensure that the road safety interventions that the car industry supports are based on sound evidence of effectiveness.

Confidant Relations of the Aged.

ERIC Educational Resources Information Center

Tigges, Leann M.; And Others

The confidant relationship is a qualitatively distinct dimension of the emotional support system of the aged, yet the composition of the confidant network has been largely neglected in research on aging. Persons (N=940) 60 years of age and older were interviewed about their socio-environmental setting. From the enumeration of their relatives,…

Collegiate Aviation Research and Education Solutions to Critical Safety Issues

NASA Technical Reports Server (NTRS)

Bowen, Brent (Editor)

2002-01-01

This Conference Proceedings is a collection of 6 abstracts and 3 papers presented April 19-20, 2001 in Denver, CO. The conference focus was "Best Practices and Benchmarking in Collegiate and Industry Programs". Topics covered include: satellite-based aviation navigation; weather safety training; human-behavior and aircraft maintenance issues; disaster preparedness; the collegiate aviation emergency response checklist; aviation safety research; and regulatory status of maintenance resource management.

System modeling with the DISC framework: evidence from safety-critical domains.

PubMed

Reiman, Teemu; Pietikäinen, Elina; Oedewald, Pia; Gotcheva, Nadezhda

2012-01-01

The objective of this paper is to illustrate the development and application of the Design for Integrated Safety Culture (DISC) framework for system modeling by evaluating organizational potential for safety in nuclear and healthcare domains. The DISC framework includes criteria for good safety culture and a description of functions that the organization needs to implement in order to orient the organization toward the criteria. Three case studies will be used to illustrate the utilization of the DISC framework in practice.

Generalized implementation of software safety policies

NASA Technical Reports Server (NTRS)

Knight, John C.; Wika, Kevin G.

1994-01-01

As part of a research program in the engineering of software for safety-critical systems, we are performing two case studies. The first case study, which is well underway, is a safety-critical medical application. The second, which is just starting, is a digital control system for a nuclear research reactor. Our goal is to use these case studies to permit us to obtain a better understanding of the issues facing developers of safety-critical systems, and to provide a vehicle for the assessment of research ideas. The case studies are not based on the analysis of existing software development by others. Instead, we are attempting to create software for new and novel systems in a process that ultimately will involve all phases of the software lifecycle. In this abstract, we summarize our results to date in a small part of this project, namely the determination and classification of policies related to software safety that must be enforced to ensure safe operation. We hypothesize that this classification will permit a general approach to the implementation of a policy enforcement mechanism.

Critical Appraisal Skills Among Canadian Obstetrics and Gynaecology Residents: How Do They Fare?

PubMed

Bougie, Olga; Posner, Glenn; Black, Amanda Y

2015-07-01

Evidence-based medicine has become the standard of care in clinical practice. In this study, our objectives were to (1) determine the type of epidemiology and/or biostatistical training being given in Canadian obstetrics and gynaecology post-graduate programs, (2) determine obstetrics and gynaecology residents' level of confidence with critical appraisal, and (3) assess knowledge of fundamental biostatistical and epidemiological principles among Canadian obstetrics and gynaecology trainees. During a national standardized in-training examination, all Canadian obstetrics and gynaecology residents were invited to complete an anonymous cross-sectional survey to determine their levels of confidence with critical appraisal. Fifteen critical appraisal questions were integrated into the standardized examination to assess critical appraisal skills objectively. Primary outcomes were the residents' level of confidence interpreting biostatistical results and applying research findings to clinical practice, their desire for more biostatistics/epidemiological training in residency, and their performance on knowledge questions. A total of 301 of 355 residents completed the survey (response rate=84.8%). Most (76.7%) had little/no confidence interpreting research statistics. Confidence was significantly higher in those with increased seniority (OR=1.93), in those who had taken a previous epidemiology/statistics course (OR=2.65), and in those who had prior publications (OR=1.82). Many (68%) had little/no confidence applying research findings to clinical practice. Confidence increased significantly with increasing training year (P<0.001) and with formal epidemiology training during residency (OR=2.01). The mean score of the 355 residents on the knowledge assessment questions was 69.8%. Increasing seniority was associated with improved overall test performance (P=0.02). Poorer performance topics included analytical study method (9.9%), study design (36.9%), and sample size (42

The 2012 Retirement Confidence Survey: job insecurity, debt weigh on retirement confidence, savings.

PubMed

Helman, Ruth; Copeland, Craig; VanDerhei, Jack

2012-03-01

Americans' confidence in their ability to retire comfortably is stagnant at historically low levels. Just 14 percent are very confident they will have enough money to live comfortably in retirement (statistically equivalent to the low of 13 percent measured in 2011 and 2009). Employment insecurity looms large: Forty-two percent identify job uncertainty as the most pressing financial issue facing most Americans today. Worker confidence about having enough money to pay for medical expenses and long-term care expenses in retirement remains well below their confidence levels for paying basic expenses. Many workers report they have virtually no savings and investments. In total, 60 percent of workers report that the total value of their household's savings and investments, excluding the value of their primary home and any defined benefit plans, is less than $25,000. Twenty-five percent of workers in the 2012 Retirement Confidence Survey say the age at which they expect to retire has changed in the past year. In 1991, 11 percent of workers said they expected to retire after age 65, and by 2012 that has grown to 37 percent. Regardless of those retirement age expectations, and consistent with prior RCS findings, half of current retirees surveyed say they left the work force unexpectedly due to health problems, disability, or changes at their employer, such as downsizing or closure. Those already in retirement tend to express higher levels of confidence than current workers about several key financial aspects of retirement. Retirees report they are significantly more reliant on Social Security as a major source of their retirement income than current workers expect to be. Although 56 percent of workers expect to receive benefits from a defined benefit plan in retirement, only 33 percent report that they and/or their spouse currently have such a benefit with a current or previous employer. More than half of workers (56 percent) report they and/or their spouse have not tried

Opinion formation and distribution in a bounded-confidence model on various networks

NASA Astrophysics Data System (ADS)

Meng, X. Flora; Van Gorder, Robert A.; Porter, Mason A.

2018-02-01

In the social, behavioral, and economic sciences, it is important to predict which individual opinions eventually dominate in a large population, whether there will be a consensus, and how long it takes for a consensus to form. Such ideas have been studied heavily both in physics and in other disciplines, and the answers depend strongly both on how one models opinions and on the network structure on which opinions evolve. One model that was created to study consensus formation quantitatively is the Deffuant model, in which the opinion distribution of a population evolves via sequential random pairwise encounters. To consider heterogeneity of interactions in a population along with social influence, we study the Deffuant model on various network structures (deterministic synthetic networks, random synthetic networks, and social networks constructed from Facebook data). We numerically simulate the Deffuant model and conduct regression analyses to investigate the dependence of the time to reach steady states on various model parameters, including a confidence bound for opinion updates, the number of participating entities, and their willingness to compromise. We find that network structure and parameter values both have important effects on the convergence time and the number of steady-state opinion groups. For some network architectures, we observe that the relationship between the convergence time and model parameters undergoes a transition at a critical value of the confidence bound. For some networks, the steady-state opinion distribution also changes from consensus to multiple opinion groups at this critical value.

The role of attitudes about vaccine safety, efficacy, and value in explaining parents' reported vaccination behavior.

PubMed

Lavail, Katherine Hart; Kennedy, Allison Michelle

2013-10-01

To explain vaccine confidence as it related to parents' decisions to vaccinate their children with recommended vaccines, and to develop a confidence measure to efficiently and effectively predict parents' self-reported vaccine behaviors. A sample of parents with at least one child younger than 6 years (n = 376) was analyzed using data from the HealthStyles 2010 survey. Questions were grouped into block variables to create three confidence constructs: value, safety, and efficacy. Regression equations controlling for demographic characteristics were used to identify the confidence construct(s) that best predicted parents' self-reported vaccination decisions (accept all, some, or none of the recommended childhood vaccines). Among the three constructs evaluated, confidence in the value of vaccines, that is the belief that vaccines are important and vaccinating one's children is the right thing to do, was the best predictor of parents' vaccine decisions, F(2, 351) = 119.199, p < .001. When combined into a block variable for analysis, two survey items measuring confidence in the value of vaccines accounted for 40% of the variance in parents' self-reported vaccine decisions. Confidence in the safety or efficacy of vaccines failed to account for additional significant variance in parent-reported vaccination behavior. Confidence in the value of vaccines is a helpful predictor of parent-reported vaccination behavior. Attitudinal constructs of confidence in the safety and efficacy of vaccines failed to account for additional significant variance in parents' vaccination behaviors. Future research should assess the role of vaccine knowledge and tangible barriers, such as access and cost, to further explain parents' vaccination behaviors.

Ares I-X Range Safety Simulation Verification and Analysis Independent Validation and Verification

NASA Technical Reports Server (NTRS)

Merry, Carl M.; Tarpley, Ashley F.; Craig, A. Scott; Tartabini, Paul V.; Brewer, Joan D.; Davis, Jerel G.; Dulski, Matthew B.; Gimenez, Adrian; Barron, M. Kyle

2011-01-01

NASA s Ares I-X vehicle launched on a suborbital test flight from the Eastern Range in Florida on October 28, 2009. To obtain approval for launch, a range safety final flight data package was generated to meet the data requirements defined in the Air Force Space Command Manual 91-710 Volume 2. The delivery included products such as a nominal trajectory, trajectory envelopes, stage disposal data and footprints, and a malfunction turn analysis. The Air Force s 45th Space Wing uses these products to ensure public and launch area safety. Due to the criticality of these data, an independent validation and verification effort was undertaken to ensure data quality and adherence to requirements. As a result, the product package was delivered with the confidence that independent organizations using separate simulation software generated data to meet the range requirements and yielded consistent results. This document captures Ares I-X final flight data package verification and validation analysis, including the methodology used to validate and verify simulation inputs, execution, and results and presents lessons learned during the process

A Comparison of Various Stress Rupture Life Models for Orbiter Composite Pressure Vessels and Confidence Intervals

NASA Technical Reports Server (NTRS)

Grimes-Ledesma, Lorie; Murthy, Pappu L. N.; Phoenix, S. Leigh; Glaser, Ronald

2007-01-01

In conjunction with a recent NASA Engineering and Safety Center (NESC) investigation of flight worthiness of Kevlar Overwrapped Composite Pressure Vessels (COPVs) on board the Orbiter, two stress rupture life prediction models were proposed independently by Phoenix and by Glaser. In this paper, the use of these models to determine the system reliability of 24 COPVs currently in service on board the Orbiter is discussed. The models are briefly described, compared to each other, and model parameters and parameter uncertainties are also reviewed to understand confidence in reliability estimation as well as the sensitivities of these parameters in influencing overall predicted reliability levels. Differences and similarities in the various models will be compared via stress rupture reliability curves (stress ratio vs. lifetime plots). Also outlined will be the differences in the underlying model premises, and predictive outcomes. Sources of error and sensitivities in the models will be examined and discussed based on sensitivity analysis and confidence interval determination. Confidence interval results and their implications will be discussed for the models by Phoenix and Glaser.

Confidence Leak in Perceptual Decision Making.

PubMed

Rahnev, Dobromir; Koizumi, Ai; McCurdy, Li Yan; D'Esposito, Mark; Lau, Hakwan

2015-11-01

People live in a continuous environment in which the visual scene changes on a slow timescale. It has been shown that to exploit such environmental stability, the brain creates a continuity field in which objects seen seconds ago influence the perception of current objects. What is unknown is whether a similar mechanism exists at the level of metacognitive representations. In three experiments, we demonstrated a robust intertask confidence leak-that is, confidence in one's response on a given task or trial influencing confidence on the following task or trial. This confidence leak could not be explained by response priming or attentional fluctuations. Better ability to modulate confidence leak predicted higher capacity for metacognition as well as greater gray matter volume in the prefrontal cortex. A model based on normative principles from Bayesian inference explained the results by postulating that observers subjectively estimate the perceptual signal strength in a stable environment. These results point to the existence of a novel metacognitive mechanism mediated by regions in the prefrontal cortex. © The Author(s) 2015.

The Critical Mass Laboratory at Rocky Flats

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rothe, Robert E

2003-10-15

The Critical Mass Laboratory (CML) at Rocky Flats northwest of Denver, Colorado, was built in 1964 and commissioned to conduct nuclear experiments on January 28, 1965. It was built to attain more accurate and precise experimental data to ensure nuclear criticality safety at the plant than were previously possible. Prior to its construction, safety data were obtained from long extrapolations of subcritical data (called in situ experiments), calculated parameters from reactor engineering 'models', and a few other imprecise methods. About 1700 critical and critical-approach experiments involving several chemical forms of enriched uranium and plutonium were performed between then and 1988.more » These experiments included single units and arrays of fissile materials, reflected and 'bare' systems, and configurations with various degrees of moderation, as well as some containing strong neutron absorbers. In 1989, a raid by the Federal Bureau of Investigation (FBI) caused the plant as a whole to focus on 'resumption' instead of further criticality safety experiments. Though either not recognized or not admitted for a few years, that FBI raid did sound the death knell for the CML. The plant's optimistic goal of resumption evolved to one of deactivation, decommissioning, and plantwide demolition during the 1990s. The once-proud CML facility was finally demolished in April of 2002.« less

78 FR 11737 - Improving Critical Infrastructure Cybersecurity

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-19

... of America, it is hereby ordered as follows: Section 1. Policy. Repeated cyber intrusions into critical infrastructure demonstrate the need for improved cybersecurity. The cyber threat to critical... cyber environment that encourages efficiency, innovation, and economic prosperity while promoting safety...

Towards a better understanding of critical gradients and near-marginal turbulence in burning plasma conditions

NASA Astrophysics Data System (ADS)

Holland, C.; Candy, J.; Howard, N. T.

2017-10-01

Developing accurate predictive transport models of burning plasma conditions is essential for confident prediction and optimization of next step experiments such as ITER and DEMO. Core transport in these plasmas is expected to be very small in gyroBohm-normalized units, such that the plasma should lie close to the critical gradients for onset of microturbulence instabilities. We present recent results investigating the scaling of linear critical gradients of ITG, TEM, and ETG modes as a function of parameters such as safety factor, magnetic shear, and collisionality for nominal conditions and geometry expected in ITER H-mode plasmas. A subset of these results is then compared against predictions from nonlinear gyrokinetic simulations, to quantify differences between linear and nonlinear thresholds. As part of this study, linear and nonlinear results from both GYRO and CGYRO codes will be compared against each other, as well as to predictions from the quasilinear TGLF model. Challenges arising from near-marginal turbulence dynamics are addressed. This work was supported by the US Department of Energy under US DE-SC0006957.

Discriminative confidence estimation for probabilistic multi-atlas label fusion.

PubMed

Benkarim, Oualid M; Piella, Gemma; González Ballester, Miguel Angel; Sanroma, Gerard

2017-12-01

Quantitative neuroimaging analyses often rely on the accurate segmentation of anatomical brain structures. In contrast to manual segmentation, automatic methods offer reproducible outputs and provide scalability to study large databases. Among existing approaches, multi-atlas segmentation has recently shown to yield state-of-the-art performance in automatic segmentation of brain images. It consists in propagating the labelmaps from a set of atlases to the anatomy of a target image using image registration, and then fusing these multiple warped labelmaps into a consensus segmentation on the target image. Accurately estimating the contribution of each atlas labelmap to the final segmentation is a critical step for the success of multi-atlas segmentation. Common approaches to label fusion either rely on local patch similarity, probabilistic statistical frameworks or a combination of both. In this work, we propose a probabilistic label fusion framework based on atlas label confidences computed at each voxel of the structure of interest. Maximum likelihood atlas confidences are estimated using a supervised approach, explicitly modeling the relationship between local image appearances and segmentation errors produced by each of the atlases. We evaluate different spatial pooling strategies for modeling local segmentation errors. We also present a novel type of label-dependent appearance features based on atlas labelmaps that are used during confidence estimation to increase the accuracy of our label fusion. Our approach is evaluated on the segmentation of seven subcortical brain structures from the MICCAI 2013 SATA Challenge dataset and the hippocampi from the ADNI dataset. Overall, our results indicate that the proposed label fusion framework achieves superior performance to state-of-the-art approaches in the majority of the evaluated brain structures and shows more robustness to registration errors. Copyright © 2017 Elsevier B.V. All rights reserved.

Targeting Low Career Confidence Using the Career Planning Confidence Scale

ERIC Educational Resources Information Center

McAuliffe, Garrett; Jurgens, Jill C.; Pickering, Worth; Calliotte, James; Macera, Anthony; Zerwas, Steven

2006-01-01

The authors describe the development and validation of a test of career planning confidence that makes possible the targeting of specific problem issues in employment counseling. The scale, developed using a rational process and the authors' experience with clients, was tested for criterion-related validity against 2 other measures. The scale…

Improving the safety of remote site emergency airway management.

PubMed

Wijesuriya, Julian; Brand, Jonathan

2014-01-01

Airway management, particularly in non-theatre settings, is an area of anaesthesia and critical care associated with significant risk of morbidity & mortality, as highlighted during the 4th National Audit Project of the Royal College of Anaesthetists (NAP4). A survey of junior anaesthetists at our hospital highlighted a lack of confidence and perceived lack of safety in emergency airway management, especially in non-theatre settings. We developed and implemented a multifaceted airway package designed to improve the safety of remote site airway management. A Rapid Sequence Induction (RSI) checklist was developed; this was combined with new advanced airway equipment and drugs bags. Additionally, new carbon dioxide detector filters were procured in order to comply with NAP4 monitoring recommendations. The RSI checklists were placed in key locations throughout the hospital and the drugs and advanced airway equipment bags were centralised in the Intensive Care Unit (ICU). It was agreed with the senior nursing staff that an appropriately trained ICU nurse would attend all emergency situations with new airway resources upon request. Departmental guidelines were updated to include details of the new resources and the on-call anaesthetist's responsibilities regarding checks and maintenance. Following our intervention trainees reported higher confidence levels regarding remote site emergency airway management. Nine trusts within the Northern Region were surveyed and we found large variations in the provision of remote site airway management resources. Complications in remote site airway management due lack of available appropriate drugs, equipment or trained staff are potentially life threatening and completely avoidable. Utilising the intervention package an anaesthetist would be able to safely plan and prepare for airway management in any setting. They would subsequently have the drugs, equipment, and trained assistance required to manage any difficulties or complications

Minimax confidence intervals in geomagnetism

NASA Technical Reports Server (NTRS)

Stark, Philip B.

1992-01-01

The present paper uses theory of Donoho (1989) to find lower bounds on the lengths of optimally short fixed-length confidence intervals (minimax confidence intervals) for Gauss coefficients of the field of degree 1-12 using the heat flow constraint. The bounds on optimal minimax intervals are about 40 percent shorter than Backus' intervals: no procedure for producing fixed-length confidence intervals, linear or nonlinear, can give intervals shorter than about 60 percent the length of Backus' in this problem. While both methods rigorously account for the fact that core field models are infinite-dimensional, the application of the techniques to the geomagnetic problem involves approximations and counterfactual assumptions about the data errors, and so these results are likely to be extremely optimistic estimates of the actual uncertainty in Gauss coefficients.

What is 'confidence' and what could affect it?: A qualitative study of mothers who are hesitant about vaccines.

PubMed

Mendel-Van Alstyne, Judith A; Nowak, Glen J; Aikin, Ann L

2017-09-09

Public confidence in immunization is critical to maintaining high vaccine-coverage rates needed to protect individuals and communities from vaccine-preventable diseases. Recent attention has been placed on factors influencing confidence in vaccination in the US and globally, but comprehensive understanding of what drives or hinders confidence in childhood vaccination is yet to be reached. As such, assessing parents' confidence in childhood vaccination and the ways in which educational materials affect confidence is needed. We sought to (1) learn how mothers who are hesitant about vaccination characterize confidence in health-related products for young children, including the recommended vaccines; (2) gain insights on what influences vaccine confidence beliefs; and (3) assess whether short, education materials affect parental confidence in childhood vaccinations. Eight moderator-lead focus groups (n=61), stratified by socioeconomic status, were undertaken with mothers of children 5years of age of less who are hesitant about vaccines. Four of the groups were held in the Philadelphia, PA area and four were held in the San Francisco/Oakland, CA area. Three educational material pairs, each consisting of a 2-3min video and an infographic poster about an immunization-related topic, were reviewed and assessed for influence on confidence. Qualitative data analysis was used to identify overarching themes across the focus groups. Themes, insights, and illustrative quotes were identified and provided for each of the major discussion areas: primary health concerns for young children; confidence beliefs and perceptions, including for recommended vaccines; facilitators and barriers to confidence; and reactions to the educational materials. Results provide helpful insights into how mothers who are hesitant about vaccines perceive confidence in childhood vaccines and health-related products, suggestions for how to improve confidence, and support for the value and use of short

A focused approach to safety guidebook.

DOT National Transportation Integrated Search

2011-08-23

"The Federal Highway Administration (FHWA) has developed the Focused Approach to Safety in order to better address the most critical safety challenges by devoting additional attention to high priority States. The purpose of the Focused Approach is to...

The 2009 Retirement Confidence Survey: economy drives confidence to record lows; many looking to work longer.

PubMed

Helman, Ruth; Copeland, Craig; VanDerhei, Jack

2009-04-01

RECORD LOW CONFIDENCE LEVELS: Workers who say they are very confident about having enough money for a comfortable retirement this year hit the lowest level in 2009 (13 percent) since the Retirement Confidence Survey started asking the question in 1993, continuing a two-year decline. Retirees also posted a new low in confidence about having a financially secure retirement, with only 20 percent now saying they are very confident (down from 41 percent in 2007). THE ECONOMY, INFLATION, COST OF LIVING ARE THE BIG CONCERNS: Not surprisingly, workers overall who have lost confidence over the past year about affording a comfortable retirement most often cite the recent economic uncertainty, inflation, and the cost of living as primary factors. In addition, certain negative experiences, such as job loss or a pay cut, loss of retirement savings, or an increase in debt, almost always contribute to loss of confidence among those who experience them. RETIREMENT EXPECTATIONS DELAYED: Workers apparently expect to work longer because of the economic downturn: 28 percent of workers in the 2009 RCS say the age at which they expect to retire has changed in the past year. Of those, the vast majority (89 percent) say that they have postponed retirement with the intention of increasing their financial security. Nevertheless, the median (mid-point) worker expects to retire at age 65, with 21 percent planning to push on into their 70s. The median retiree actually retired at age 62, and 47 percent of retirees say they retired sooner than planned. WORKING IN RETIREMENT: More workers are also planning to supplement their income in retirement by working for pay. The percentage of workers planning to work after they retire has increased to 72 percent in 2009 (up from 66 percent in 2007). This compares with 34 percent of retirees who report they actually worked for pay at some time during their retirement. GREATER WORRY ABOUT BASIC AND HEALTH EXPENSES: Workers who say they very confident in

The Inside Information about Safety Surfacing.

ERIC Educational Resources Information Center

Thompson, Donna; Hudson, Susan

2003-01-01

Tested the impact attenuation characteristics of safety surfaces used in indoor child care play settings. Found that the most common surfaces used were indoor/outdoor carpet, various types of mats, and safety floor tiles. Nearly 60 percent of tested materials had a critical fall height of 1 foot or less. Concluded that carpet, safety tile, and…

Safety of intravenous lacosamide in critically ill children.

PubMed

Welsh, Sarah S; Lin, Nan; Topjian, Alexis A; Abend, Nicholas S

2017-11-01

Acute seizures are common in critically ill children. These patients would benefit from intravenous anti-seizure medications with few adverse effects. We reviewed the usage and effects of intravenous lacosamide in critically ill children with seizures or status epilepticus. This retrospective series included consecutive patients who received at least one dose of intravenous lacosamide from April 2011 to February 2016 in the pediatric intensive care unit of a quaternary care children's hospital, including patients with new lacosamide initiation and continuation of outpatient oral lacosamide. Dosing and prescribing practices were reviewed. Adverse effects were defined by predefined criteria, and most were evaluated during the full admission. We identified 51 intensive care unit admissions (47 unique patients) with intravenous lacosamide administration. Lacosamide was utilized as a third or fourth-line anti-seizure medication for acute seizures or status epilepticus in the lacosamide-naïve cohort. One patient experienced bradycardia and one patient experienced a rash that were considered potentially related to lacosamide. No other adverse effects were identified, including no evidence of PR interval prolongation. Lacosamide was well tolerated in critically ill children. Further study is warranted to evaluate the effectiveness of earlier lacosamide use for pediatric status epilepticus and acute seizures. Copyright © 2017 British Epilepsy Association. Published by Elsevier Ltd. All rights reserved.

Pharmacy student decision making in over-the-counter medicine supply: A critical incident study.

PubMed

McMillan, Sara S; Thangarajah, Thachaayini; Anderson, Claire; Kelly, Fiona

2017-09-28

Various factors influence decision making in over-the-counter (OTC) medicine consultations, yet limited studies have focused, in-depth, on the thought process of pharmacy staff. This includes pharmacy students as pharmacists-in-training. To explore the factors that influence pharmacy students' decisions in relation to OTC consultations and choice of OTC medicine/s. Semi-structured interviews using the critical incident technique were undertaken with ten pharmacy students in Australia, who also worked as part-time pharmacy staff. Nine key themes were identified to influence pharmacy student decision making in OTC consultations, including customer response, confidence and scope of practice. Product requests were reported as more challenging due to customer expectations and experiences in other pharmacies, states or countries. Although negative customer response influenced some students to supply medicines in contradiction of evidence, an overarching concern for safety meant that a medicine was only supplied if unlikely to cause harm. Students reported developing confidence in OTC decision making more from real-life practice than university training; greater confidence was identified for inquiries more frequently experienced in the pharmacy. Students perceived that customers had assumptions around support staff, and were happier to talk to students than assistants. This study further identified that OTC decision making is a complex process for pharmacy students. Additional opportunities for experiential learning within this area are suggested, such as work-based placements or in-class activities such as role-plays with simulated patients. Copyright © 2017 Elsevier Inc. All rights reserved.

The role of students’ self-confidence in relation with swimming routines, frequency, and tutor in swimming class

NASA Astrophysics Data System (ADS)

Hartoto, S.; Khory, F. D.; Prakoso, B. B.

2018-01-01

It is compulsory for prospective physical education teachers to have the ability to perform swimming. The average of students’ passing in swimming class has reached 72%. Most students who failed to pass the class are those who have had aquaphobia, the condition in which one failed to perceive a situation in a positive and objective, some of which are hard to detect. This perception may come from past experience and it could diminish students’ confidence. Furthermore, the lack of confidence in students may cause unsatisfactory learning results. Therefore it is critical for the teachers to have a comprehensive knowledge of their students’ past experience in formulating a lesson. This research used descriptive qualitative approach. The aim of this article is to investigate the correlation between students’ confidence level and swimming routines, frequency, and tutors in order to succeed swimming class. This article will attempt to describe the results of a research conducted to 139 students of Department of Sport Education Universitas Negeri Surabaya as prospective physical education teachers in Indonesia who took swimming class. Past experience and confidence level are measured by a questionnaire. The results of the research show that students who have a higher level of confidence are those who follow practice routines with adequate frequency and helped by a compatible tutor.

A protocol for the development of a critical thinking assessment tool for nurses using a Delphi technique.

PubMed

Jacob, Elisabeth; Duffield, Christine; Jacob, Darren

2017-08-01

The aim of this study was to develop an assessment tool to measure the critical thinking ability of nurses. As an increasing number of complex patients are admitted to hospitals, the importance of nurses recognizing changes in health status and picking up on deterioration is more important. To detect early signs of complication requires critical thinking skills. Registered Nurses are expected to commence their clinical careers with the necessary critical thinking skills to ensure safe nursing practice. Currently, there is no published tool to assess critical thinking skills which is context specific to Australian nurses. A modified Delphi study will be used for the project. This study will develop a series of unfolding case scenarios using national health data with multiple-choice questions to assess critical thinking. Face validity of the scenarios will be determined by an expert reference group of clinical and academic nurses. A Delphi study will determine the answers to scenario questions. Panel members will be expert clinicians and educators from two states in Australia. Rasch analysis of the questionnaire will assess validity and reliability of the tool. Funding for the study and Research Ethics Committee approval were obtained in March and November 2016, respectively. Patient outcomes and safety are directly linked to nurses' critical thinking skills. This study will develop an assessment tool to provide a standardized method of measuring nurses' critical thinking skills across Australia. This will provide healthcare providers with greater confidence in the critical thinking level of graduate Registered Nurses. © 2017 John Wiley & Sons Ltd.

Failure Modes Effects and Criticality Analysis, an Underutilized Safety, Reliability, Project Management and Systems Engineering Tool

NASA Astrophysics Data System (ADS)

Mullin, Daniel Richard

2013-09-01

The majority of space programs whether manned or unmanned for science or exploration require that a Failure Modes Effects and Criticality Analysis (FMECA) be performed as part of their safety and reliability activities. This comes as no surprise given that FMECAs have been an integral part of the reliability engineer's toolkit since the 1950s. The reasons for performing a FMECA are well known including fleshing out system single point failures, system hazards and critical components and functions. However, in the author's ten years' experience as a space systems safety and reliability engineer, findings demonstrate that the FMECA is often performed as an afterthought, simply to meet contract deliverable requirements and is often started long after the system requirements allocation and preliminary design have been completed. There are also important qualitative and quantitative components often missing which can provide useful data to all of project stakeholders. These include; probability of occurrence, probability of detection, time to effect and time to detect and, finally, the Risk Priority Number. This is unfortunate as the FMECA is a powerful system design tool that when used effectively, can help optimize system function while minimizing the risk of failure. When performed as early as possible in conjunction with writing the top level system requirements, the FMECA can provide instant feedback on the viability of the requirements while providing a valuable sanity check early in the design process. It can indicate which areas of the system will require redundancy and which areas are inherently the most risky from the onset. Based on historical and practical examples, it is this author's contention that FMECAs are an immense source of important information for all involved stakeholders in a given project and can provide several benefits including, efficient project management with respect to cost and schedule, system engineering and requirements management

[Involvement of local dietetics professionals in risk communication program on food safety in municipal governments and their attitude towards the program].

PubMed

Akamatsu, Rie; Nomura, Marika; Horiguchi, Itsuko; Tanaka, Hisako; Marui, Eiji

2009-01-01

The objective of this study is to gather statistical references on food safety education that encourages competence of food choice from the view-point of food safety. A survey on the involvement of the risk communication program on food safety in municipal governments and the attitude of local dietetics professionals towards the program was conducted. In November, 2006, self-reported questionnaires were mailed to 1990 local dietetics professionals who worked in municipal governments in Japan. Descriptive statistics and cross tables were used for data analysis. 1162 questionnaires were mailed and 1130 available surveys were returned. Among the respondents, 41.5% answered that they inform the community about food safety, but 49.9% answered that they did not get information from the community. Most of the respondents answered that risk communication of food safety was important; 21.8% answered "extremely agree" and 62.3% answered "rather agree" on a scale of four from "extremely agree" to "do not agree". More than one-half of the dietetics professionals answered that their confidence in conducting risk communication was low; 20.5% answered "no confidence" and 52.5% answered "hardly have confidence" on a scale of four from "without confidence" to "with confidence". More than 80% of the respondents answered that they needed "professional knowledge" and "support from professional agencies". This study suggests that educating local dietetics professionals about professional knowledge on food safety, and obtaining support from special agencies will be essential in the upgrade of risk communication program on food safety in a community.

Engineering Student Self-Assessment through Confidence-Based Scoring

ERIC Educational Resources Information Center

Yuen-Reed, Gigi; Reed, Kyle B.

2015-01-01

A vital aspect of an answer is the confidence that goes along with it. Misstating the level of confidence one has in the answer can have devastating outcomes. However, confidence assessment is rarely emphasized during typical engineering education. The confidence-based scoring method described in this study encourages students to both think about…

Operating safely in surgery and critical care with perioperative automation.

PubMed

Grover, Christopher; Barney, Kate

2004-01-01

A study by the Institute of Medicine (IOM) found that as many as 98,000 Americans die each year from preventable medical errors. These findings, combined with a growing spate of negative publicity, have brought patient safety to its rightful place at the healthcare forefront. Nowhere are patient safety issues more critical than in the anesthesia, surgery and critical care environments. These high-acuity settings--with their fast pace, complex and rapidly changing care regimens and mountains of diverse clinical data-arguably pose the greatest patient safety risk in the hospital.

A survey of residents' experience with patient safety and quality improvement concepts in radiation oncology.

PubMed

Spraker, Matthew B; Nyflot, Matthew; Hendrickson, Kristi; Ford, Eric; Kane, Gabrielle; Zeng, Jing

The safety and quality of radiation therapy have recently garnered increased attention in radiation oncology (RO). Although patient safety guidelines expect physicians and physicists to lead clinical safety and quality improvement (QI) programs, trainees' level of exposure to patient safety concepts during training is unknown. We surveyed active medical and physics RO residents in North America in February 2016. Survey questions involved demographics and program characteristics, exposure to patient safety topics, and residents' attitude regarding their safety education. Responses were collected from 139 of 690 (20%) medical and 56 of 248 (23%) physics RO residents. More than 60% of residents had no exposure or only informal exposure to incident learning systems (ILS), root cause analysis, failure mode and effects analysis (FMEA), and the concepts of human factors engineering. Medical residents had less exposure to FMEA than physics residents, and fewer medical than physics residents felt confident in leading FMEA in clinic. Only 27% of residents felt that patient safety training was adequate in their program. Experiential learning through practical workshops was the most desired educational modality, preferred over web-based learning. Residents training in departments with ILS had greater exposure to patient safety concepts and felt more confident leading clinical patient safety and QI programs than residents training in departments without an ILS. The survey results show that most residents have no or only informal exposure to important patient safety and QI concepts and do not feel confident leading clinical safety programs. This represents a gaping need in RO resident education. Educational programs such as these can be naturally developed as part of an incident learning program that focuses on near-miss events. Future research should assess the needs of RO program directors to develop effective RO patient safety and QI training programs. Copyright © 2016

Clinical trials, epidemiology, and public confidence.

PubMed

Seigel, Daniel

2003-11-15

Critics in the media have become wary of exaggerated research claims from clinical trials and epidemiological studies. Closer to home, reviews of published studies find a high frequency of poor quality in research methods, including those used for statistical analysis. The statistical literature has long recognized that questionable research findings can occur when investigators fail to set aside their own outcome preferences as they analyse and interpret data. These preferences can be related to financial interests, a concern for patients, peer recognition, and commitment to a hypothesis. Several analyses of published papers provide evidence of an association between financial conflicts of interest and reported results. If we are to regain professional and lay confidence in research findings some changes are required. Clinical journals need to develop more competence in the review of analytic methods and provide space for thorough discussion of published papers whose results are challenged. Graduate schools need to prepare students for the conflicting interests that surround the practice of statistics. Above all, each of us must recognize our responsibility to use analytic procedures that illuminate the research issues rather than those serving special interests. Copyright 2003 John Wiley & Sons, Ltd.

Association of emergency department length of stay with safety net status

PubMed Central

Fee, Christopher; Burstin, Helen; Maselli, Judith H.; Hsia, Renee Y.

2013-01-01

Context Performance measures, particularly pay-for-performance, may have unintended consequences for safety-net institutions caring for disproportionate shares of Medicaid or uninsured patients. Objective Describe emergency department (ED) compliance with proposed length of stay measures for admissions (8 hours) and discharges, transfers, and observations (4 hours) by safety-net status. Design, Setting, and Participants 2008 National Hospital Ambulatory Medical Care Survey (NHAMCS) ED data were stratified by safety-net status (CDC definition) and disposition (admission, discharge, observation, transfer). The 2008 NHAMCS is a national probability sample of 396 hospitals (90.2% unweighted response rate) and 34,134 patient records. Visits were excluded for age <18, missing length of stay, or dispositions of: missing, “other”, left against medical advice, dead on arrival. Median and 90th percentile ED lengths of stay were calculated for each disposition and admission/discharge subcategories (critical care, psychiatric, routine) stratified by safety-net status. Multivariate analyses determined associations with length of stay measure compliance. Results are presented as odds ratios with 95% confidence intervals. Main Outcome ED length of stay measure compliance by disposition and safety-net status. Results 27.87% of the 2008 ED visits from the weighted NHAMCS dataset were excluded leaving 72.13% for analysis. Of these, 42.3% were to safety-net and 57.7% to non-safety-net EDs. The median (interquartile range) ED lengths of stay for safety-net and non-safety-net ED visits respectively are as follows: 269 minutes (178, 397) and 281 (178, 401) for admissions, 156 (95, 239) and 148 (88, 238) for discharges, 355 (221, 675) and 298 (195, 440) for observations, and 235 (155, 378) and 239 (142, 368) for transfers. Safety-net status is not independently associated with compliance with ED length of stay measures for admissions (OR 0.83, [95%CI 0.52, 1.34]), discharges (1.03 [0

Predicting Fatigue and Psychophysiological Test Performance from Speech for Safety-Critical Environments.

PubMed

Baykaner, Khan Richard; Huckvale, Mark; Whiteley, Iya; Andreeva, Svetlana; Ryumin, Oleg

2015-01-01

Automatic systems for estimating operator fatigue have application in safety-critical environments. A system which could estimate level of fatigue from speech would have application in domains where operators engage in regular verbal communication as part of their duties. Previous studies on the prediction of fatigue from speech have been limited because of their reliance on subjective ratings and because they lack comparison to other methods for assessing fatigue. In this paper, we present an analysis of voice recordings and psychophysiological test scores collected from seven aerospace personnel during a training task in which they remained awake for 60 h. We show that voice features and test scores are affected by both the total time spent awake and the time position within each subject's circadian cycle. However, we show that time spent awake and time-of-day information are poor predictors of the test results, while voice features can give good predictions of the psychophysiological test scores and sleep latency. Mean absolute errors of prediction are possible within about 17.5% for sleep latency and 5-12% for test scores. We discuss the implications for the use of voice as a means to monitor the effects of fatigue on cognitive performance in practical applications.

Predicting Fatigue and Psychophysiological Test Performance from Speech for Safety-Critical Environments

PubMed Central

Baykaner, Khan Richard; Huckvale, Mark; Whiteley, Iya; Andreeva, Svetlana; Ryumin, Oleg

2015-01-01

Automatic systems for estimating operator fatigue have application in safety-critical environments. A system which could estimate level of fatigue from speech would have application in domains where operators engage in regular verbal communication as part of their duties. Previous studies on the prediction of fatigue from speech have been limited because of their reliance on subjective ratings and because they lack comparison to other methods for assessing fatigue. In this paper, we present an analysis of voice recordings and psychophysiological test scores collected from seven aerospace personnel during a training task in which they remained awake for 60 h. We show that voice features and test scores are affected by both the total time spent awake and the time position within each subject’s circadian cycle. However, we show that time spent awake and time-of-day information are poor predictors of the test results, while voice features can give good predictions of the psychophysiological test scores and sleep latency. Mean absolute errors of prediction are possible within about 17.5% for sleep latency and 5–12% for test scores. We discuss the implications for the use of voice as a means to monitor the effects of fatigue on cognitive performance in practical applications. PMID:26380259

How to Fire a President: Voting "No Confidence" with Confidence

ERIC Educational Resources Information Center

Schmidt, Peter

2009-01-01

College faculties often use votes of "no confidence" to try to push out the leaders of their institutions. Many do so, however, without giving much thought to what such a vote actually means, whether they are using it appropriately, or how it will affect their campus--and their own future. Mae Kuykendall, a professor of law at Michigan State…

Querying Safety Cases

NASA Technical Reports Server (NTRS)

Denney, Ewen W.; Naylor, Dwight; Pai, Ganesh

2014-01-01

Querying a safety case to show how the various stakeholders' concerns about system safety are addressed has been put forth as one of the benefits of argument-based assurance (in a recent study by the Health Foundation, UK, which reviewed the use of safety cases in safety-critical industries). However, neither the literature nor current practice offer much guidance on querying mechanisms appropriate for, or available within, a safety case paradigm. This paper presents a preliminary approach that uses a formal basis for querying safety cases, specifically Goal Structuring Notation (GSN) argument structures. Our approach semantically enriches GSN arguments with domain-specific metadata that the query language leverages, along with its inherent structure, to produce views. We have implemented the approach in our toolset AdvoCATE, and illustrate it by application to a fragment of the safety argument for an Unmanned Aircraft System (UAS) being developed at NASA Ames. We also discuss the potential practical utility of our query mechanism within the context of the existing framework for UAS safety assurance.

Another look at confidence intervals: Proposal for a more relevant and transparent approach

NASA Astrophysics Data System (ADS)

Biller, Steven D.; Oser, Scott M.

2015-02-01

The behaviors of various confidence/credible interval constructions are explored, particularly in the region of low event numbers where methods diverge most. We highlight a number of challenges, such as the treatment of nuisance parameters, and common misconceptions associated with such constructions. An informal survey of the literature suggests that confidence intervals are not always defined in relevant ways and are too often misinterpreted and/or misapplied. This can lead to seemingly paradoxical behaviors and flawed comparisons regarding the relevance of experimental results. We therefore conclude that there is a need for a more pragmatic strategy which recognizes that, while it is critical to objectively convey the information content of the data, there is also a strong desire to derive bounds on model parameter values and a natural instinct to interpret things this way. Accordingly, we attempt to put aside philosophical biases in favor of a practical view to propose a more transparent and self-consistent approach that better addresses these issues.

Confidence as Bayesian Probability: From Neural Origins to Behavior.

PubMed

Meyniel, Florent; Sigman, Mariano; Mainen, Zachary F

2015-10-07

Research on confidence spreads across several sub-fields of psychology and neuroscience. Here, we explore how a definition of confidence as Bayesian probability can unify these viewpoints. This computational view entails that there are distinct forms in which confidence is represented and used in the brain, including distributional confidence, pertaining to neural representations of probability distributions, and summary confidence, pertaining to scalar summaries of those distributions. Summary confidence is, normatively, derived or "read out" from distributional confidence. Neural implementations of readout will trade off optimality versus flexibility of routing across brain systems, allowing confidence to serve diverse cognitive functions. Copyright © 2015 Elsevier Inc. All rights reserved.

Methods for addressing "innocent bystanders" when evaluating safety of concomitant vaccines.

PubMed

Wang, Shirley V; Abdurrob, Abdurrahman; Spoendlin, Julia; Lewis, Edwin; Newcomer, Sophia R; Fireman, Bruce; Daley, Matthew F; Glanz, Jason M; Duffy, Jonathan; Weintraub, Eric S; Kulldorff, Martin

2018-04-01

The need to develop methods for studying the safety of childhood immunization schedules has been recognized by the Institute of Medicine and Department of Health and Human Services. The recommended childhood immunization schedule includes multiple vaccines in a visit. A key concern is safety of concomitant (same day) versus separate day vaccination. This paper addresses a methodological challenge for observational studies using a self-controlled design to investigate the safety of concomitant vaccination. We propose a process for distinguishing which of several concomitantly administered vaccines is responsible for increased risk of an adverse event while adjusting for confounding due to relationships between effect modifying risk factors and concomitant vaccine combinations. We illustrate the approach by re-examining the known increase in risk of seizure 7 to 10 days after measles-mumps-rubella (MMR) vaccination and evaluating potential independent or modifying effects of other vaccines. Initial analyses suggested that DTaP had both an independent and potentiating effect on seizure. After accounting for the relationship between age at vaccination and vaccine combination, there was little evidence for increased risk of seizure with same day administration of DTaP and MMR; incidence rate ratio, 95% confidence interval 1.2 (0.9-1.6), P value = θ.226. We have shown that when using a self-controlled design to investigate safety of concomitant vaccination, it can be critically important to adjust for time-invariant effect modifying risk factors, such as age at time of vaccination, which are structurally related to vaccination patterns due to recommended immunization schedules. Copyright © 2018 John Wiley & Sons, Ltd.

Gender, Math Confidence, and Grit: Relationships with Quantitative Skills and Performance in an Undergraduate Biology Course

PubMed Central

Flanagan, K. M.; Einarson, J.

2017-01-01

In a world filled with big data, mathematical models, and statistics, the development of strong quantitative skills is becoming increasingly critical for modern biologists. Teachers in this field must understand how students acquire quantitative skills and explore barriers experienced by students when developing these skills. In this study, we examine the interrelationships among gender, grit, and math confidence for student performance on a pre–post quantitative skills assessment and overall performance in an undergraduate biology course. Here, we show that females significantly underperformed relative to males on a quantitative skills assessment at the start of term. However, females showed significantly higher gains over the semester, such that the gender gap in performance was nearly eliminated by the end of the semester. Math confidence plays an important role in the performance on both the pre and post quantitative skills assessments and overall performance in the course. The effect of grit on student performance, however, is mediated by a student’s math confidence; as math confidence increases, the positive effect of grit decreases. Consequently, the positive impact of a student’s grittiness is observed most strongly for those students with low math confidence. We also found grit to be positively associated with the midterm score and the final grade in the course. Given the relationships established in this study among gender, grit, and math confidence, we provide “instructor actions” from the literature that can be applied in the classroom to promote the development of quantitative skills in light of our findings. PMID:28798209

Decoded fMRI neurofeedback can induce bidirectional confidence changes within single participants.

PubMed

Cortese, Aurelio; Amano, Kaoru; Koizumi, Ai; Lau, Hakwan; Kawato, Mitsuo

2017-04-01

Neurofeedback studies using real-time functional magnetic resonance imaging (rt-fMRI) have recently incorporated the multi-voxel pattern decoding approach, allowing for fMRI to serve as a tool to manipulate fine-grained neural activity embedded in voxel patterns. Because of its tremendous potential for clinical applications, certain questions regarding decoded neurofeedback (DecNef) must be addressed. Specifically, can the same participants learn to induce neural patterns in opposite directions in different sessions? If so, how does previous learning affect subsequent induction effectiveness? These questions are critical because neurofeedback effects can last for months, but the short- to mid-term dynamics of such effects are unknown. Here we employed a within-subjects design, where participants underwent two DecNef training sessions to induce behavioural changes of opposing directionality (up or down regulation of perceptual confidence in a visual discrimination task), with the order of training counterbalanced across participants. Behavioral results indicated that the manipulation was strongly influenced by the order and the directionality of neurofeedback training. We applied nonlinear mathematical modeling to parametrize four main consequences of DecNef: main effect of change in confidence, strength of down-regulation of confidence relative to up-regulation, maintenance of learning effects, and anterograde learning interference. Modeling results revealed that DecNef successfully induced bidirectional confidence changes in different sessions within single participants. Furthermore, the effect of up- compared to down-regulation was more prominent, and confidence changes (regardless of the direction) were largely preserved even after a week-long interval. Lastly, the effect of the second session was markedly diminished as compared to the effect of the first session, indicating strong anterograde learning interference. These results are interpreted in the framework

A new technology perspective and engineering tools approach for large, complex and distributed mission and safety critical systems components

NASA Technical Reports Server (NTRS)

Carrio, Miguel A., Jr.

1988-01-01

Rapidly emerging technology and methodologies have out-paced the systems development processes' ability to use them effectively, if at all. At the same time, the tools used to build systems are becoming obsolescent themselves as a consequence of the same technology lag that plagues systems development. The net result is that systems development activities have not been able to take advantage of available technology and have become equally dependent on aging and ineffective computer-aided engineering tools. New methods and tools approaches are essential if the demands of non-stop and Mission and Safety Critical (MASC) components are to be met.

Multimodal MSI in Conjunction with Broad Coverage Spatially Resolved MS 2 Increases Confidence in Both Molecular Identification and Localization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Veličković, Dušan; Chu, Rosalie K.; Carrell, Alyssa A.

One critical aspect of mass spectrometry imaging (MSI) is the need to confidently identify detected analytes. While orthogonal tandem MS (e.g., LC-MS 2) experiments from sample extracts can assist in annotating ions, the spatial information about these molecules is lost. Accordingly, this could cause mislead conclusions, especially in cases where isobaric species exhibit different distributions within a sample. In this Technical Note, we employed a multimodal imaging approach, using matrix assisted laser desorption/ionization (MALDI)-MSI and liquid extraction surface analysis (LESA)-MS 2I, to confidently annotate and One critical aspect of mass spectrometry imaging (MSI) is the need to confidently identify detectedmore » analytes. While orthogonal tandem MS (e.g., LC-MS2) experiments from sample extracts can assist in annotating ions, the spatial information about these molecules is lost. Accordingly, this could cause mislead conclusions, especially in cases where isobaric species exhibit different distributions within a sample. In this Technical Note, we employed a multimodal imaging approach, using matrix assisted laser desorption/ionization (MALDI)-MSI and liquid extraction surface analysis (LESA)-MS 2I, to confidently annotate and localize a broad range of metabolites involved in a tripartite symbiosis system of moss, cyanobacteria, and fungus. We found that the combination of these two imaging modalities generated very congruent ion images, providing the link between highly accurate structural information onfered by LESA and high spatial resolution attainable by MALDI. These results demonstrate how this combined methodology could be very useful in differentiating metabolite routes in complex systems.« less

76 FR 67020 - Railroad Safety Advisory Committee; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-28

... Device Distraction, Critical Incident, Track Safety Standards, Dark Territory, Passenger Safety, and... railroad safety matters. The RSAC is composed of 54 voting representatives from 31 member organizations...

Estimation of parameters of dose volume models and their confidence limits

NASA Astrophysics Data System (ADS)

van Luijk, P.; Delvigne, T. C.; Schilstra, C.; Schippers, J. M.

2003-07-01

Predictions of the normal-tissue complication probability (NTCP) for the ranking of treatment plans are based on fits of dose-volume models to clinical and/or experimental data. In the literature several different fit methods are used. In this work frequently used methods and techniques to fit NTCP models to dose response data for establishing dose-volume effects, are discussed. The techniques are tested for their usability with dose-volume data and NTCP models. Different methods to estimate the confidence intervals of the model parameters are part of this study. From a critical-volume (CV) model with biologically realistic parameters a primary dataset was generated, serving as the reference for this study and describable by the NTCP model. The CV model was fitted to this dataset. From the resulting parameters and the CV model, 1000 secondary datasets were generated by Monte Carlo simulation. All secondary datasets were fitted to obtain 1000 parameter sets of the CV model. Thus the 'real' spread in fit results due to statistical spreading in the data is obtained and has been compared with estimates of the confidence intervals obtained by different methods applied to the primary dataset. The confidence limits of the parameters of one dataset were estimated using the methods, employing the covariance matrix, the jackknife method and directly from the likelihood landscape. These results were compared with the spread of the parameters, obtained from the secondary parameter sets. For the estimation of confidence intervals on NTCP predictions, three methods were tested. Firstly, propagation of errors using the covariance matrix was used. Secondly, the meaning of the width of a bundle of curves that resulted from parameters that were within the one standard deviation region in the likelihood space was investigated. Thirdly, many parameter sets and their likelihood were used to create a likelihood-weighted probability distribution of the NTCP. It is concluded that for the

Risk factors for hospital-associated venous thromboembolism in critically ill children following cardiothoracic surgery or therapeutic cardiac catheterisation.

PubMed

Atchison, Christie M; Amankwah, Ernest; Wilhelm, Jean; Arlikar, Shilpa; Branchford, Brian R; Stock, Arabela; Streiff, Michael; Takemoto, Clifford; Ayala, Irmel; Everett, Allen; Stapleton, Gary; Jacobs, Marshall L; Jacobs, Jeffrey P; Goldenberg, Neil A

2018-02-01

Paediatric hospital-associated venous thromboembolism is a leading quality and safety concern at children's hospitals. The aim of this study was to determine risk factors for hospital-associated venous thromboembolism in critically ill children following cardiothoracic surgery or therapeutic cardiac catheterisation. We conducted a retrospective, case-control study of children admitted to the cardiovascular intensive care unit at Johns Hopkins All Children's Hospital (St. Petersburg, Florida, United States of America) from 2006 to 2013. Hospital-associated venous thromboembolism cases were identified based on ICD-9 discharge codes and validated using radiological record review. We randomly selected two contemporaneous cardiovascular intensive care unit controls without hospital-associated venous thromboembolism for each hospital-associated venous thromboembolism case, and limited the study population to patients who had undergone cardiothoracic surgery or therapeutic cardiac catheterisation. Odds ratios and 95% confidence intervals for associations between putative risk factors and hospital-associated venous thromboembolism were determined using univariate and multivariate logistic regression. Among 2718 admissions to the cardiovascular intensive care unit during the study period, 65 met the criteria for hospital-associated venous thromboembolism (occurrence rate, 2%). Restriction to cases and controls having undergone the procedures of interest yielded a final study population of 57 hospital-associated venous thromboembolism cases and 76 controls. In a multiple logistic regression model, major infection (odds ratio=5.77, 95% confidence interval=1.06-31.4), age ⩽1 year (odds ratio=6.75, 95% confidence interval=1.13-160), and central venous catheterisation (odds ratio=7.36, 95% confidence interval=1.13-47.8) were found to be statistically significant independent risk factors for hospital-associated venous thromboembolism in these children. Patients with all three

Emergency nurses' perceptions of the role of confidence, self-efficacy and reflexivity in managing the cognitively impaired older person in pain.

PubMed

Fry, Margaret; MacGregor, Casimir; Hyland, Simone; Payne, Barbara; Chenoweth, Lynn

2015-06-01

The study aimed to explore the practice of care among emergency nurses caring for older persons with cognitive impairment and who presented in pain from a long bone fracture, to highlight nurse confidence and self-efficacy in practice. Cognitive impairment is an issue increasingly facing emergency departments. Older persons with cognitive impairment have complex care needs, requiring effective clinical decision-making and provision of care. Nurse confidence and self-efficacy are critical to meeting the necessary standards of care for this vulnerable patient group. A multi-centre study. The study was undertaken across four emergency departments in Sydney, Australia. Sixteen focus group discussions were conducted with 80 emergency departments of nurses. Four main themes emerged: confidence and self-efficacy through experience; confidence and self-efficacy as a balancing act; confidence and self-efficacy as practice; and confidence and self-efficacy and interpersonal relations. Our findings demonstrate that confidence, self-efficacy and reflexivity enabled the delivery of appropriate, timely and compassionate care. Further, confidence and self-efficacy within nursing praxis relied on clinical experience and reflective learning and was crucial to skill and knowledge acquisition. Our research suggests that confidence, self-efficacy and reflexivity need to be developed and valued in nurses' careers to better meet the needs of complex older persons encountered within everyday practice. © 2015 John Wiley & Sons Ltd.

Prospective Safety Analysis and the Complex Aviation System

NASA Technical Reports Server (NTRS)

Smith, Brian E.

2013-01-01

Fatal accident rates in commercial passenger aviation are at historic lows yet have plateaued and are not showing evidence of further safety advances. Modern aircraft accidents reflect both historic causal factors and new unexpected "Black Swan" events. The ever-increasing complexity of the aviation system, along with its associated technology and organizational relationships, provides fertile ground for fresh problems. It is important to take a proactive approach to aviation safety by working to identify novel causation mechanisms for future aviation accidents before they happen. Progress has been made in using of historic data to identify the telltale signals preceding aviation accidents and incidents, using the large repositories of discrete and continuous data on aircraft and air traffic control performance and information reported by front-line personnel. Nevertheless, the aviation community is increasingly embracing predictive approaches to aviation safety. The "prospective workshop" early assessment tool described in this paper represents an approach toward this prospective mindset-one that attempts to identify the future vectors of aviation and asks the question: "What haven't we considered in our current safety assessments?" New causation mechanisms threatening aviation safety will arise in the future because new (or revised) systems and procedures will have to be used under future contextual conditions that have not been properly anticipated. Many simulation models exist for demonstrating the safety cases of new operational concepts and technologies. However the results from such models can only be as valid as the accuracy and completeness of assumptions made about the future context in which the new operational concepts and/or technologies will be immersed. Of course that future has not happened yet. What is needed is a reasonably high-confidence description of the future operational context, capturing critical contextual characteristics that modulate

Social Security: Strengthening a Vital Safety Net for Latinos

ERIC Educational Resources Information Center

Cruz, Jeff

2012-01-01

Since 1935, Social Security has provided a vital safety net for millions of Americans who cannot work because of age or disability. This safety net has been especially critical for Americans of Latino decent, who number more than 50 million or nearly one out of every six Americans. Social Security is critical to Latinos because it is much more…

Communication confidence in persons with aphasia.

PubMed

Babbitt, Edna M; Cherney, Leora R

2010-01-01

Communication confidence is a construct that has not been explored in the aphasia literature. Recently, national and international organizations have endorsed broader assessment methods that address quality of life and include participation, activity, and impairment domains as well as psychosocial areas. Individuals with aphasia encounter difficulties in all these areas on a daily basis in living with a communication disorder. Improvements are often reflected in narratives that are not typically included in standard assessments. This article illustrates how a new instrument measuring communication confidence might fit into a broad assessment framework and discusses the interaction of communication confidence, autonomy, and self-determination for individuals living with aphasia.

Confidence and Competence with Mathematical Procedures

ERIC Educational Resources Information Center

Foster, Colin

2016-01-01

Confidence assessment (CA), in which students state alongside each of their answers a confidence level expressing how certain they are, has been employed successfully within higher education. However, it has not been widely explored with school pupils. This study examined how school mathematics pupils (N?=?345) in five different secondary schools…

"Yes, we can!" review on team confidence in sports.

PubMed

Fransen, Katrien; Mertens, Niels; Feltz, Deborah; Boen, Filip

2017-08-01

During the last decade, team confidence has received more and more attention in the sport psychology literature. Research has demonstrated that athletes who are more confident in their team's abilities exert more effort, set more challenging goals, are more resilient when facing adversities, and ultimately perform better. This article reviews the existing literature in order to provide more clarity in terms of the conceptualization and the operationalization of team confidence. We thereby distinguish between collective efficacy (i.e., process-oriented team confidence) and team outcome confidence (i.e., outcome-oriented team confidence). In addition, both the sources as well as the outcomes of team confidence will be discussed. Furthermore, we will go deeper into the dispersion of team confidence and we will evaluate the current guidelines on how to measure both types of team confidence. Building upon this base, the article then highlights interesting avenues for future research in order to further improve both our theoretical knowledge on team confidence and its application to the field. Copyright © 2017 Elsevier Ltd. All rights reserved.

Future Data Communication Architectures for Safety Critical Aircraft Cabin Systems

NASA Astrophysics Data System (ADS)

Berkhahn, Sven-Olaf

2012-05-01

The cabin of modern aircraft is subject to increasing demands for fast reconfiguration and hence flexibility. These demands require studies for new network architectures and technologies of the electronic cabin systems, which consider also weight and cost reductions as well as safety constraints. Two major approaches are in consideration to reduce the complex and heavy wiring harness: the usage of a so called hybrid data bus technology, which enables the common usage of the same data bus for several electronic cabin systems with different safety and security requirements and the application of wireless data transfer technologies for electronic cabin systems.

Sensitivity-Uncertainty Techniques for Nuclear Criticality Safety

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, Forrest B.; Rising, Michael Evan; Alwin, Jennifer Louise

2017-08-07

The sensitivity and uncertainty analysis course will introduce students to k eff sensitivity data, cross-section uncertainty data, how k eff sensitivity data and k eff uncertainty data are generated and how they can be used. Discussion will include how sensitivity/uncertainty data can be used to select applicable critical experiments, to quantify a defensible margin to cover validation gaps and weaknesses, and in development of upper subcritical limits.

SU-D-201-07: A Survey of Radiation Oncology Residents’ Training and Preparedness to Lead Patient Safety Programs in Clinics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spraker, M; Nyflot, M; Ford, E

Purpose: Safety and quality has garnered increased attention in radiation oncology, and physicians and physicists are ideal leaders of clinical patient safety programs. However, it is not clear whether residency programs incorporate formal patient safety training and adequately equip residents to assume this leadership role. A national survey was conducted to evaluate medical and physics residents’ exposure to safety topics and their confidence with the skills required to lead clinical safety programs. Methods: Radiation oncology residents were identified in collaboration with ARRO and AAPM. The survey was released in February 2016 via email using REDCap. This included questions about exposuremore » to safety topics, confidence leading safety programs, and interest in training opportunities (i.e. workshops). Residents rated their exposure, skills, and confidence on 4 or 5-point scales. Medical and physics residents responses were compared using chi-square tests. Results: Responses were collected from 56 of 248 (22%) physics and 139 of 690 (20%) medical residents. More than two thirds of all residents had no or only informal exposure to incident learning systems (ILS), root cause analysis (RCA), failure mode and effects analysis (FMEA), and the concept of human factors engineering (HFE). Likewise, 63% of residents had not heard of RO-ILS. Response distributions were similar, however more physics residents had formal exposure to FMEA (p<0.0001) and felt they were adequately trained to lead FMEAs in clinic (p<0.001) than medical residents. Only 36% of residents felt their patient safety training was adequate, and 58% felt more training would benefit their education. Conclusion: These results demonstrate that, despite increasing desire for patient safety training, medical and physics residents’ exposure to relevant concepts is low. Physics residents had more exposure to FMEA than medical residents, and were more confident in leading FMEA. This suggests that

Feedback for reinforcement learning based brain-machine interfaces using confidence metrics.

PubMed

Prins, Noeline W; Sanchez, Justin C; Prasad, Abhishek

2017-06-01

For brain-machine interfaces (BMI) to be used in activities of daily living by paralyzed individuals, the BMI should be as autonomous as possible. One of the challenges is how the feedback is extracted and utilized in the BMI. Our long-term goal is to create autonomous BMIs that can utilize an evaluative feedback from the brain to update the decoding algorithm and use it intelligently in order to adapt the decoder. In this study, we show how to extract the necessary evaluative feedback from a biologically realistic (synthetic) source, use both the quantity and the quality of the feedback, and how that feedback information can be incorporated into a reinforcement learning (RL) controller architecture to maximize its performance. Motivated by the perception-action-reward cycle (PARC) in the brain which links reward for cognitive decision making and goal-directed behavior, we used a reward-based RL architecture named Actor-Critic RL as the model. Instead of using an error signal towards building an autonomous BMI, we envision to use a reward signal from the nucleus accumbens (NAcc) which plays a key role in the linking of reward to motor behaviors. To deal with the complexity and non-stationarity of biological reward signals, we used a confidence metric which was used to indicate the degree of feedback accuracy. This confidence was added to the Actor's weight update equation in the RL controller architecture. If the confidence was high (>0.2), the BMI decoder used this feedback to update its parameters. However, when the confidence was low, the BMI decoder ignored the feedback and did not update its parameters. The range between high confidence and low confidence was termed as the 'ambiguous' region. When the feedback was within this region, the BMI decoder updated its weight at a lower rate than when fully confident, which was decided by the confidence. We used two biologically realistic models to generate synthetic data for MI (Izhikevich model) and NAcc (Humphries

Feedback for reinforcement learning based brain-machine interfaces using confidence metrics

NASA Astrophysics Data System (ADS)

Prins, Noeline W.; Sanchez, Justin C.; Prasad, Abhishek

2017-06-01

Objective. For brain-machine interfaces (BMI) to be used in activities of daily living by paralyzed individuals, the BMI should be as autonomous as possible. One of the challenges is how the feedback is extracted and utilized in the BMI. Our long-term goal is to create autonomous BMIs that can utilize an evaluative feedback from the brain to update the decoding algorithm and use it intelligently in order to adapt the decoder. In this study, we show how to extract the necessary evaluative feedback from a biologically realistic (synthetic) source, use both the quantity and the quality of the feedback, and how that feedback information can be incorporated into a reinforcement learning (RL) controller architecture to maximize its performance. Approach. Motivated by the perception-action-reward cycle (PARC) in the brain which links reward for cognitive decision making and goal-directed behavior, we used a reward-based RL architecture named Actor-Critic RL as the model. Instead of using an error signal towards building an autonomous BMI, we envision to use a reward signal from the nucleus accumbens (NAcc) which plays a key role in the linking of reward to motor behaviors. To deal with the complexity and non-stationarity of biological reward signals, we used a confidence metric which was used to indicate the degree of feedback accuracy. This confidence was added to the Actor’s weight update equation in the RL controller architecture. If the confidence was high (>0.2), the BMI decoder used this feedback to update its parameters. However, when the confidence was low, the BMI decoder ignored the feedback and did not update its parameters. The range between high confidence and low confidence was termed as the ‘ambiguous’ region. When the feedback was within this region, the BMI decoder updated its weight at a lower rate than when fully confident, which was decided by the confidence. We used two biologically realistic models to generate synthetic data for MI (Izhikevich

Sex differences in confidence influence patterns of conformity.

PubMed

Cross, Catharine P; Brown, Gillian R; Morgan, Thomas J H; Laland, Kevin N

2017-11-01

Lack of confidence in one's own ability can increase the likelihood of relying on social information. Sex differences in confidence have been extensively investigated in cognitive tasks, but implications for conformity have not been directly tested. Here, we tested the hypothesis that, in a task that shows sex differences in confidence, an indirect effect of sex on social information use will also be evident. Participants (N = 168) were administered a mental rotation (MR) task or a letter transformation (LT) task. After providing an answer, participants reported their confidence before seeing the responses of demonstrators and being allowed to change their initial answer. In the MR, but not the LT, task, women showed lower levels of confidence than men, and confidence mediated an indirect effect of sex on the likelihood of switching answers. These results provide novel, experimental evidence that confidence is a general explanatory mechanism underpinning susceptibility to social influences. Our results have implications for the interpretation of the wider literature on sex differences in conformity. © 2016 The British Psychological Society.

Safety climate and mindful safety practices in the oil and gas industry.

PubMed

Dahl, Øyvind; Kongsvik, Trond

2018-02-01

The existence of a positive association between safety climate and the safety behavior of sharp-end workers in high-risk organizations is supported by a considerable body of research. Previous research has primarily analyzed two components of safety behavior, namely safety compliance and safety participation. The present study extends previous research by looking into the relationship between safety climate and another component of safety behavior, namely mindful safety practices. Mindful safety practices are defined as the ability to be aware of critical factors in the environment and to act appropriately when dangers arise. Regression analysis was used to examine whether mindful safety practices are, like compliance and participation, promoted by a positive safety climate, in a questionnaire-based study of 5712 sharp-end workers in the oil and gas industry. The analysis revealed that a positive safety climate promotes mindful safety practices. The regression model accounted for roughly 31% of the variance in mindful safety practices. The most important safety climate factor was safety leadership. The findings clearly demonstrate that mindful safety practices are highly context-dependent, hence, manageable and susceptible to change. In order to improve safety climate in a direction which is favorable for mindful safety practices, the results demonstrate that it is important to give the fundamental features of safety climate high priority and in particular that of safety leadership. Copyright © 2017 National Safety Council and Elsevier Ltd. All rights reserved.

Validation and Verification (V&V) of Safety-Critical Systems Operating Under Off-Nominal Conditions

NASA Technical Reports Server (NTRS)

Belcastro, Christine M.

2012-01-01

Loss of control (LOC) remains one of the largest contributors to aircraft fatal accidents worldwide. Aircraft LOC accidents are highly complex in that they can result from numerous causal and contributing factors acting alone or more often in combination. Hence, there is no single intervention strategy to prevent these accidents. Research is underway at the National Aeronautics and Space Administration (NASA) in the development of advanced onboard system technologies for preventing or recovering from loss of vehicle control and for assuring safe operation under off-nominal conditions associated with aircraft LOC accidents. The transition of these technologies into the commercial fleet will require their extensive validation and verification (V&V) and ultimate certification. The V&V of complex integrated systems poses highly significant technical challenges and is the subject of a parallel research effort at NASA. This chapter summarizes the V&V problem and presents a proposed process that could be applied to complex integrated safety-critical systems developed for preventing aircraft LOC accidents. A summary of recent research accomplishments in this effort is referenced.

Experimental criticality specifications. An annotated bibliography through 1977

DOE Office of Scientific and Technical Information (OSTI.GOV)

Paxton, H.C.

1978-05-01

The compilation of approximately 300 references gives sources of experimental criticality parameters of systems containing /sup 235/U, /sup 233/U, and /sup 239/Pu. The intent is to cover basic data for criticality safety applications. The references are arranged by subject.

Fault Injection Validation of a Safety-Critical TMR Sysem

NASA Astrophysics Data System (ADS)

Irrera, Ivano; Madeira, Henrique; Zentai, Andras; Hergovics, Beata

2016-08-01

Digital systems and their software are the core technology for controlling and monitoring industrial systems in practically all activity domains. Functional safety standards such as the European standard EN 50128 for railway applications define the procedures and technical requirements for the development of software for railway control and protection systems. The validation of such systems is a highly demanding task. In this paper we discuss the use of fault injection techniques, which have been used extensively in several domains, particularly in the space domain, to complement the traditional procedures to validate a SIL (Safety Integrity Level) 4 system for railway signalling, implementing a TMR (Triple Modular Redundancy) architecture. The fault injection tool is based on JTAG technology. The results of our injection campaign showed a high degree of tolerance to most of the injected faults, but several cases of unexpected behaviour have also been observed, helping understanding worst-case scenarios.

Laboratory safety and the WHO World Alliance for Patient Safety.

PubMed

McCay, Layla; Lemer, Claire; Wu, Albert W

2009-06-01

Laboratory medicine has been a pioneer in the field of patient safety; indeed, the College of American Pathology first called attention to the issue in 1946. Delivering reliable laboratory results has long been considered a priority, as the data produced in laboratory medicine have the potential to critically influence individual patients' diagnosis and management. Until recently, most attention on laboratory safety has focused on the analytic stage of laboratory medicine. Addressing this stage has led to significant and impressive improvements in the areas over which laboratories have direct control. However, recent data demonstrate that pre- and post-analytical phases are at least as vulnerable to errors; to further improve patient safety in laboratory medicine, attention must now be focused on the pre- and post-analytic phases, and the concept of patient safety as a multi-disciplinary, multi-stage and multi-system concept better understood. The World Alliance for Patient Safety (WAPS) supports improvement of patient safety globally and provides a potential framework for considering the total testing process.

Cultural differences in dealing with critical incidents.

PubMed

Leonhardt, Jörg; Vogt, Joachim

2009-01-01

This article discusses the cultural aspects of High Reliability Organizations (HROs), such as air navigation services. HROs must maintain a highly professional safety culture and constantly be prepared to handle crises. The article begins with a general discussion of the concept of organizational culture. The special characteristics of HROs and their safety culture is then described. Finally the article illustrates how Critical Incident Stress Management (CISM) is becoming an ingrained feature of the organizational culture in air traffic control systems. Critical Incident Stress Management is a prevention program that can successfully guard against the negative effects of critical incidents. The CISM program of DFS (Deutsche Flugsicherung) was recently evaluated by the University of Copenhagen. This evaluation not only confirmed the successful prevention of negative effects at the operation's employee level (especially air traffic controllers), but also showed a sustained improvement of its safety culture and its overall organizational performance. The special aspects of cross-cultural crisis intervention and the challenges it faces, as well as the importance of prevention programs, such as CISM, are illustrated using the examples of two aircraft accidents: the crash landing of a calibration aircraft and the Lake Constance air disaster.

Beyond hypercorrection: remembering corrective feedback for low-confidence errors.

PubMed

Griffiths, Lauren; Higham, Philip A

2018-02-01

Correcting errors based on corrective feedback is essential to successful learning. Previous studies have found that corrections to high-confidence errors are better remembered than low-confidence errors (the hypercorrection effect). The aim of this study was to investigate whether corrections to low-confidence errors can also be successfully retained in some cases. Participants completed an initial multiple-choice test consisting of control, trick and easy general-knowledge questions, rated their confidence after answering each question, and then received immediate corrective feedback. After a short delay, they were given a cued-recall test consisting of the same questions. In two experiments, we found high-confidence errors to control questions were better corrected on the second test compared to low-confidence errors - the typical hypercorrection effect. However, low-confidence errors to trick questions were just as likely to be corrected as high-confidence errors. Most surprisingly, we found that memory for the feedback and original responses, not confidence or surprise, were significant predictors of error correction. We conclude that for some types of material, there is an effortful process of elaboration and problem solving prior to making low-confidence errors that facilitates memory of corrective feedback.

Causal Relationship Analysis of the Patient Safety Culture Based on Safety Attitudes Questionnaire in Taiwan.

PubMed

Lee, Yii-Ching; Zeng, Pei-Shan; Huang, Chih-Hsuan; Wu, Hsin-Hung

2018-01-01

This study uses the decision-making trial and evaluation laboratory method to identify critical dimensions of the safety attitudes questionnaire in Taiwan in order to improve the patient safety culture from experts' viewpoints. Teamwork climate, stress recognition, and perceptions of management are three causal dimensions, while safety climate, job satisfaction, and working conditions are receiving dimensions. In practice, improvements on effect-based dimensions might receive little effects when a great amount of efforts have been invested. In contrast, improving a causal dimension not only improves itself but also results in better performance of other dimension(s) directly affected by this particular dimension. Teamwork climate and perceptions of management are found to be the most critical dimensions because they are both causal dimensions and have significant influences on four dimensions apiece. It is worth to note that job satisfaction is the only dimension affected by the other dimensions. In order to effectively enhance the patient safety culture for healthcare organizations, teamwork climate, and perceptions of management should be closely monitored.

Causal Relationship Analysis of the Patient Safety Culture Based on Safety Attitudes Questionnaire in Taiwan

PubMed Central

Zeng, Pei-Shan; Huang, Chih-Hsuan

2018-01-01

This study uses the decision-making trial and evaluation laboratory method to identify critical dimensions of the safety attitudes questionnaire in Taiwan in order to improve the patient safety culture from experts' viewpoints. Teamwork climate, stress recognition, and perceptions of management are three causal dimensions, while safety climate, job satisfaction, and working conditions are receiving dimensions. In practice, improvements on effect-based dimensions might receive little effects when a great amount of efforts have been invested. In contrast, improving a causal dimension not only improves itself but also results in better performance of other dimension(s) directly affected by this particular dimension. Teamwork climate and perceptions of management are found to be the most critical dimensions because they are both causal dimensions and have significant influences on four dimensions apiece. It is worth to note that job satisfaction is the only dimension affected by the other dimensions. In order to effectively enhance the patient safety culture for healthcare organizations, teamwork climate, and perceptions of management should be closely monitored. PMID:29686825

Maternal Confidence for Physiologic Childbirth: A Concept Analysis.

PubMed

Neerland, Carrie E

2018-06-06

Confidence is a term often used in research literature and consumer media in relation to birth, but maternal confidence has not been clearly defined, especially as it relates to physiologic labor and birth. The aim of this concept analysis was to define maternal confidence in the context of physiologic labor and childbirth. Rodgers' evolutionary method was used to identify attributes, antecedents, and consequences of maternal confidence for physiologic birth. Databases searched included Ovid MEDLINE, CINAHL, PsycINFO, and Sociological Abstracts from the years 1995 to 2015. A total of 505 articles were retrieved, using the search terms pregnancy, obstetric care, prenatal care, and self-efficacy and the keyword confidence. Articles were identified for in-depth review and inclusion based on whether the term confidence was used or assessed in relationship to labor and/or birth. In addition, a hand search of the reference lists of the selected articles was performed. Twenty-four articles were reviewed in this concept analysis. We define maternal confidence for physiologic birth as a woman's belief that physiologic birth can be achieved, based on her view of birth as a normal process and her belief in her body's innate ability to birth, which is supported by social support, knowledge, and information founded on a trusted relationship with a maternity care provider in an environment where the woman feels safe. This concept analysis advances the concept of maternal confidence for physiologic birth and provides new insight into how women's confidence for physiologic birth might be enhanced during the prenatal period. Further investigation of confidence for physiologic birth across different cultures is needed to identify cultural differences in constructions of the concept. © 2018 by the American College of Nurse-Midwives.

Assured Human-Autonomy Interaction through Machine Self-Confidence

NASA Astrophysics Data System (ADS)

Aitken, Matthew

Autonomous systems employ many layers of approximations in order to operate in increasingly uncertain and unstructured environments. The complexity of these systems makes it hard for a user to understand the systems capabilities, especially if the user is not an expert. However, if autonomous systems are to be used efficiently, their users must trust them appropriately. This purpose of this work is to implement and assess an 'assurance' that an autonomous system can provide to the user to elicit appropriate trust. Specifically, the autonomous system's perception of its own capabilities is reported to the user as the self-confidence assurance. The self-confidence assurance should allow the user to more quickly and accurately assess the autonomous system's capabilities, generating appropriate trust in the autonomous system. First, this research defines self-confidence and discusses what the self-confidence assurance is attempting to communicate to the user. Then it provides a framework for computing the autonomous system's self-confidence as a function of self-confidence factors which correspond to individual elements in the autonomous system's process. In order to explore this idea, self-confidence is implemented on an autonomous system that uses a mixed observability Markov decision process model to solve a pursuit-evasion problem on a road network. The implementation of a factor assessing the goodness of the autonomy's expected performance is focused on in particular. This work highlights some of the issues and considerations in the design of appropriate metrics for the self-confidence factors, and provides the basis for future research for computing self-confidence in autonomous systems.

The Relationship Between the Learning and Patient Safety Climates of Clinical Departments and Residents' Patient Safety Behaviors.

PubMed

Silkens, Milou E W M; Arah, Onyebuchi A; Wagner, Cordula; Scherpbier, Albert J J A; Heineman, Maas Jan; Lombarts, Kiki M J M H

2018-05-15

Improving residents' patient safety behavior should be a priority in graduate medical education to ensure the safety of current and future patients. Supportive learning and patient safety climates may foster this behavior. This study examined the extent to which residents' self-reported patient safety behavior can be explained by the learning climate and patient safety climate of their clinical departments. The authors collected learning climate data from clinical departments in the Netherlands that used the web-based Dutch Residency Educational Climate Test between September 2015 and October 2016. They also gathered data on those departments' patient safety climate and on residents' self-reported patient safety behavior. They used generalized linear mixed models and multivariate general linear models to test for associations in the data. In total, 1,006 residents evaluated 143 departments in 31 teaching hospitals. Departments' patient safety climate was associated with residents' overall self-reported patient safety behavior (regression coefficient (b) = 0.33; 95% confidence interval (CI) = 0.14 - 0.52). Departments' learning climate was not associated with residents' patient safety behavior (b = 0.01; 95% CI = -0.17 - 0.19), although it was with their patient safety climate (b = 0.73; 95% CI = 0.69 - 0.77). Departments should focus on establishing a supportive patient safety climate to improve residents' patient safety behavior. Building a supportive learning climate might help to improve the patient safety climate and, in turn, residents' patient safety behavior.

Preharvest food safety.

PubMed

Childers, A B; Walsh, B

1996-07-23

Preharvest food safety is essential for the protection of our food supply. The production and transport of livestock and poultry play an integral part in the safety of these food products. The goals of this safety assurance include freedom from pathogenic microorganisms, disease, and parasites, and from potentially harmful residues and physical hazards. Its functions should be based on hazard analysis and critical control points from producer to slaughter plant with emphasis on prevention of identifiable hazards rather than on removal of contaminated products. The production goal is to minimize infection and insure freedom from potentially harmful residues and physical hazards. The marketing goal is control of exposure to pathogens and stress. Both groups should have functional hazard analysis and critical control points management programs which include personnel training and certification of producers. These programs must cover production procedures, chemical usage, feeding, treatment practices, drug usage, assembly and transportation, and animal identification. Plans must use risk assessment principles, and the procedures must be defined. Other elements would include preslaughter certification, environmental protection, control of chemical hazards, live-animal drug-testing procedures, and identification of physical hazards.

[Risk management in anesthesia and critical care medicine].

PubMed

Eisold, C; Heller, A R

2017-03-01

Throughout its history, anesthesia and critical care medicine has experienced vast improvements to increase patient safety. Consequently, anesthesia has never been performed on such a high level as it is being performed today. As a result, we do not always fully perceive the risks involved in our daily activity. A survey performed in Swiss hospitals identified a total of 169 hot spots which endanger patient safety. It turned out that there is a complex variety of possible errors that can only be tackled through consistent implementation of a safety culture. The key elements to reduce complications are continuing staff education, algorithms and standard operating procedures (SOP), working according to the principles of crisis resource management (CRM) and last but not least the continuous work-up of mistakes identified by critical incident reporting systems.

Anomalous Evidence, Confidence Change, and Theory Change.

PubMed

Hemmerich, Joshua A; Van Voorhis, Kellie; Wiley, Jennifer

2016-08-01

A novel experimental paradigm that measured theory change and confidence in participants' theories was used in three experiments to test the effects of anomalous evidence. Experiment 1 varied the amount of anomalous evidence to see if "dose size" made incremental changes in confidence toward theory change. Experiment 2 varied whether anomalous evidence was convergent (of multiple types) or replicating (similar finding repeated). Experiment 3 varied whether participants were provided with an alternative theory that explained the anomalous evidence. All experiments showed that participants' confidence changes were commensurate with the amount of anomalous evidence presented, and that larger decreases in confidence predicted theory changes. Convergent evidence and the presentation of an alternative theory led to larger confidence change. Convergent evidence also caused more theory changes. Even when people do not change theories, factors pertinent to the evidence and alternative theories decrease their confidence in their current theory and move them incrementally closer to theory change. Copyright © 2015 Cognitive Science Society, Inc.

Adolescent confidence in immunisation: Assessing and comparing attitudes of adolescents and adults.

PubMed

Wang, Bing; Giles, Lynne; Afzali, Hossein Haji Ali; Clarke, Michelle; Ratcliffe, Julie; Chen, Gang; Marshall, Helen

2016-11-04

There is limited knowledge of adolescent views and attitudes towards immunisation. Our study investigated adolescent attitudes to immunisation and compared differences in vaccination attitudes between adolescents and adults. This study was a cross-sectional, national online survey. Recruitment was stratified by state and gender to ensure findings were nationally representative. Regression analyses were performed to assess and compare adolescent and adult views on vaccine benefits, community protection, risks, side effects, sources of information, and decision-making preference. In 2013, 502 adolescents and 2003 adults completed the online survey. Lower levels of vaccine confidence were observed in adolescents with adolescents less likely to believe vaccines are beneficial and/or safe compared to adults (p=0.043). Compared to females, males were less confident of vaccine benefits (p<0.05) but less concern about vaccine side effects (p<0.05). Adolescents were more concerned about vaccine side effects than adults for pain (p<0.001), redness or swelling (p<0.001), and fever (p=0.006). Adolescents were less likely than adults to consider health professionals (p<0.001) and the media (e.g. internet) (p=0.010) as important sources of information, and were more likely to seek information from social networks (p<0.001) including families and schools. Although 62.0% of adolescents agreed that parents should make the decision about vaccination for them, adolescents were more likely to prefer a joint decision with parents (p<0.001) or by themselves (p=0.007) compared with adults. Adolescents have a lesser understanding of vaccine safety and benefits than adults and have higher concerns about potential vaccine reactions. Improving adolescent awareness and knowledge of the benefits and risks of vaccination through school-based educational programs may improve confidence in and uptake of vaccines for adolescents and increase vaccine confidence in the next generation of parents

The self-consistency model of subjective confidence.

PubMed

Koriat, Asher

2012-01-01

How do people monitor the correctness of their answers? A self-consistency model is proposed for the process underlying confidence judgments and their accuracy. In answering a 2-alternative question, participants are assumed to retrieve a sample of representations of the question and base their confidence on the consistency with which the chosen answer is supported across representations. Confidence is modeled by analogy to the calculation of statistical level of confidence (SLC) in testing hypotheses about a population and represents the participant's assessment of the likelihood that a new sample will yield the same choice. Assuming that participants draw representations from a commonly shared item-specific population of representations, predictions were derived regarding the function relating confidence to inter-participant consensus and intra-participant consistency for the more preferred (majority) and the less preferred (minority) choices. The predicted pattern was confirmed for several different tasks. The confidence-accuracy relationship was shown to be a by-product of the consistency-correctness relationship: It is positive because the answers that are consistently chosen are generally correct, but negative when the wrong answers tend to be favored. The overconfidence bias stems from the reliability-validity discrepancy: Confidence monitors reliability (or self-consistency), but its accuracy is evaluated in calibration studies against correctness. Simulation and empirical results suggest that response speed is a frugal cue for self-consistency, and its validity depends on the validity of self-consistency in predicting performance. Another mnemonic cue-accessibility, which is the overall amount of information that comes to mind-makes an added, independent contribution. Self-consistency and accessibility may correspond to the 2 parameters that affect SLC: sample variance and sample size.

PFP Public Automatic Exchange (PAX) Commercial Grade Item (CGI) Critical Characteristics

DOE Office of Scientific and Technical Information (OSTI.GOV)

WHITE, W.F.

2000-04-04

This document specifies the critical characteristics for Commercial Grade Items (CGI) procured for use within the safety envelope of PFP's PAX system as required by HNF-PRO-268 and HNF-PRO-1819. These are the minimum specifications that the equipment must meet in order to properly perform its safety function. There may be several manufacturers or models that meet the critical characteristics for any one item.

Are your employees sick of hearing about safety? Ways to improve how safety is communicated at your company

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pollari, Roger A.

2008-06-02

Companies that care about their employees care about their employees’ safety and will go to great lengths to communicate the importance of working safely. Monthly safety meetings, creative safety contests, safety websites, sharing lessons learned—safety communicators tend to use a variety of methods to distribute procedures and critical safety information to help employees plan and perform work. However, the safety message falls on deaf ears in some cases, especially when employees feel they’re being overloaded with safety information to the point where they are sick of hearing about it. This poses a conundrum for safety communicators: Should they keep pouringmore » on the safety, or should they lighten up? How much is the right amount?« less

Nuclear safety policy working group recommendations on nuclear propulsion safety for the space exploration initiative

NASA Technical Reports Server (NTRS)

Marshall, Albert C.; Lee, James H.; Mcculloch, William H.; Sawyer, J. Charles, Jr.; Bari, Robert A.; Cullingford, Hatice S.; Hardy, Alva C.; Niederauer, George F.; Remp, Kerry; Rice, John W.

1993-01-01

An interagency Nuclear Safety Working Group (NSPWG) was chartered to recommend nuclear safety policy, requirements, and guidelines for the Space Exploration Initiative (SEI) nuclear propulsion program. These recommendations, which are contained in this report, should facilitate the implementation of mission planning and conceptual design studies. The NSPWG has recommended a top-level policy to provide the guiding principles for the development and implementation of the SEI nuclear propulsion safety program. In addition, the NSPWG has reviewed safety issues for nuclear propulsion and recommended top-level safety requirements and guidelines to address these issues. These recommendations should be useful for the development of the program's top-level requirements for safety functions (referred to as Safety Functional Requirements). The safety requirements and guidelines address the following topics: reactor start-up, inadvertent criticality, radiological release and exposure, disposal, entry, safeguards, risk/reliability, operational safety, ground testing, and other considerations.

Extended time-to-collision measures for road traffic safety assessment.

PubMed

Minderhoud, M M; Bovy, P H

2001-01-01

This article describes two new safety indicators based on the time-to-collision notion suitable for comparative road traffic safety analyses. Such safety indicators can be applied in the comparison of a do-nothing case with an adapted situation, e.g. the introduction of intelligent driver support systems. In contrast to the classical time-to-collision value, measured at a cross section, the improved safety indicators use vehicle trajectories collected over a specific time horizon for a certain roadway segment to calculate the overall safety indicator value. Vehicle-specific indicator values as well as safety-critical probabilities can easily be determined from the developed safety measures. Application of the derived safety indicators is demonstrated for the assessment of the potential safety impacts of driver support systems from which it appears that some Autonomous Intelligent Cruise Control (AICC) designs are more safety-critical than the reference case without these systems. It is suggested that the indicator threshold value to be applied in the safety assessment has to be adapted when advanced AICC-systems with safe characteristics are introduced.

A Critical Examination of Safety Texts: Implications for Trade and Industrial Education.

ERIC Educational Resources Information Center

Gregson, James A.

1996-01-01

Qualitative content analysis of three texts used to prepare trade and industrial teachers in occupational safety and health examined definitions of health/safety problems, allocation of responsibility, social context, and collective responsibility. Implementing practices from these texts could free teachers from responsibility for negligence and…

Proton pump inhibitors versus histamine 2 receptor antagonists for stress ulcer prophylaxis in critically ill patients: a systematic review and meta-analysis.

PubMed

Alhazzani, Waleed; Alenezi, Farhan; Jaeschke, Roman Z; Moayyedi, Paul; Cook, Deborah J

2013-03-01

Critically ill patients may develop bleeding caused by stress ulceration. Acid suppression is commonly prescribed for patients at risk of stress ulcer bleeding. Whether proton pump inhibitors are more effective than histamine 2 receptor antagonists is unclear. To determine the efficacy and safety of proton pump inhibitors vs. histamine 2 receptor antagonists for the prevention of upper gastrointestinal bleeding in the ICU. We searched Cochrane Central Register of Controlled Trials, MEDLINE, EMBASE, ACPJC, CINHAL, online trials registries (clinicaltrials.gov, ISRCTN Register, WHO ICTRP), conference proceedings databases, and reference lists of relevant articles. Randomized controlled parallel group trials comparing proton pump inhibitors to histamine 2 receptor antagonists for the prevention of upper gastrointestinal bleeding in critically ill patients, published before March 2012. Two reviewers independently applied eligibility criteria, assessed quality, and extracted data. The primary outcomes were clinically important upper gastrointestinal bleeding and overt upper gastrointestinal bleeding; secondary outcomes were nosocomial pneumonia, ICU mortality, ICU length of stay, and Clostridium difficile infection. Trial authors were contacted for additional or clarifying information. Fourteen trials enrolling a total of 1,720 patients were included. Proton pump inhibitors were more effective than histamine 2 receptor antagonists at reducing clinically important upper gastrointestinal bleeding (relative risk 0.36; 95% confidence interval 0.19-0.68; p = 0.002; I = 0%) and overt upper gastrointestinal bleeding (relative risk 0.35; 95% confidence interval 0.21-0.59; p < 0.0001; I = 15%). There were no differences between proton pump inhibitors and histamine 2 receptor antagonists in the risk of nosocomial pneumonia (relative risk 1.06; 95% confidence interval 0.73-1.52; p = 0.76; I = 0%), ICU mortality (relative risk 1.01; 95% confidence interval 0.83-1.24; p = 0.91; I = 0

Safety-critical event risk associated with cell phone tasks as measured in naturalistic driving studies: A systematic review and meta-analysis.

PubMed

Simmons, Sarah M; Hicks, Anne; Caird, Jeff K

2016-02-01

A systematic review and meta-analysis of naturalistic driving studies involving estimates of safety-critical event risk associated with handheld device use while driving is described. Fifty-seven studies identified from targeted databases, journals and websites were reviewed in depth, and six were ultimately included. These six studies, published between 2006 and 2014, encompass seven sets of naturalistic driver data and describe original research that utilized naturalistic methods to assess the effects of distracting behaviors. Four studies involved non-commercial drivers of light vehicles and two studies involved commercial drivers of trucks and buses. Odds ratios quantifying safety-critical event (SCE) risk associated with talking, dialing, locating or answering, and texting or browsing were extracted. Stratified meta-analysis of pooled odds ratios was used to estimate SCE risk by distraction type; meta-regression was used to test for sources of heterogeneity. The results indicate that tasks that require drivers to take their eyes off the road, such as dialing, locating a phone and texting, increase SCE risk to a greater extent than tasks that do not require eyes off the road such as talking. Although talking on a handheld device did not increase SCE risk, further research is required to determine whether it indirectly influences SCE risk (e.g., by encouraging other cell phone activities). In addition, a number of study biases and quality issues of naturalistic driving studies are discussed. Copyright © 2015 Elsevier Ltd. All rights reserved.

Critical thinking, self-esteem, and state anxiety of nursing students.

PubMed

Suliman, Wafika A; Halabi, Jehad

2007-02-01

This study aimed at exploring the existing predominant critical thinking disposition(s) of baccalaureate nursing students and the relationship among their critical thinking (CT), self-esteem (SE), and state anxiety (SA). Cross-sectional correlational design was utilized to achieve the said aim. A voluntary convenient sample consisted of first year (n=105) and fourth year (n=60) nursing students. The California Critical Thinking Disposition Inventory, Rosenberg Self-Esteem Scale, and Spielberger State Anxiety Inventory were used for data collection after their translation to Arabic language and test for validity and reliability. Descriptive and inferential statistics were used to analyze data. Results showed that both groups overall CT was marginal indicating no serious deficiency, their SE was average, and their SA was relatively high; they reported analyticity, open-mindedness, systematicity, inquisitiveness, and truth seeking as predominant critical thinking dispositions with no significant difference between them. However, the two groups were weak with significant difference on CT self-confidence (t=-2.053, df=136.904, p=.042) with beginning students reporting poorer level of CT self-confidence. Significant correlation results showed that critical thinking is positively correlated with SE, negatively correlated with SA, and SE is negatively correlated with SA; however, all correlations were actually quite low.

Trust, confidence, and the 2008 global financial crisis.

PubMed

Earle, Timothy C

2009-06-01

The 2008 global financial crisis has been compared to a "once-in-a-century credit tsunami," a disaster in which the loss of trust and confidence played key precipitating roles and the recovery from which will require the restoration of these crucial factors. Drawing on the analogy between the financial crisis and environmental and technological hazards, recent research on the role of trust and confidence in the latter is used to provide a perspective on the former. Whereas "trust" and "confidence" are used interchangeably and without explicit definition in most discussions of the financial crisis, this perspective uses the TCC model of cooperation to clearly distinguish between the two and to demonstrate how this distinction can lead to an improved understanding of the crisis. The roles of trust and confidence-both in precipitation and in possible recovery-are discussed for each of the three major sets of actors in the crisis, the regulators, the banks, and the public. The roles of trust and confidence in the larger context of risk management are also examined; trust being associated with political approaches, confidence with technical. Finally, the various stances that government can take with regard to trust-such as supportive or skeptical-are considered. Overall, it is argued that a clear understanding of trust and confidence and a close examination of the specific, concrete circumstances of a crisis-revealing when either trust or confidence is appropriate-can lead to useful insights for both recovery and prevention of future occurrences.

Ares I-X Range Safety Simulation and Analysis IV and V

NASA Technical Reports Server (NTRS)

Merry, Carl M.; Brewer, Joan D.; Dulski, Matt B.; Gimenez, Adrian; Barron, Kyle; Tarpley, Ashley F.; Craig, A. Scott; Beaty, Jim R.; Starr, Brett R.

2011-01-01

NASA s Ares I-X vehicle launched on a suborbital test flight from the Eastern Range in Florida on October 28, 2009. NASA generated a Range Safety (RS) product data package to meet the RS trajectory data requirements defined in the Air Force Space Command Manual (AFSPCMAN) 91-710. Some products included were a nominal ascent trajectory, ascent flight envelopes, and malfunction turn data. These products are used by the Air Force s 45th Space Wing (45SW) to ensure public safety and to make flight termination decisions on launch day. Due to the criticality of the RS data, an independent validation and verification (IV&V) effort was undertaken to accompany the data generation analyses to ensure utmost data quality and correct adherence to requirements. As a result of the IV&V efforts, the RS product package was delivered with confidence that two independent organizations using separate simulation software generated data to meet the range requirements and yielded similar results. This document captures the Ares I-X RS product IV&V analysis, including the methodology used to verify inputs, simulation, and output data for certain RS products. Additionally a discussion of lessons learned is presented to capture advantages and disadvantages to the IV&V processes used.

Basic Confidence Predictors of Career Decision-Making Self-Efficacy

ERIC Educational Resources Information Center

Paulsen, Alisa M.; Betz, Nancy E.

2004-01-01

The extent to which Basic Confidence Scales predicted career decision-making self-efficacy was studied in a sample of 627 undergraduate students. Six confidence variables accounted for 49% of the variance in career decision-making self-efficacy. Leadership confidence was the most important, but confidence in science, mathematics, writing, using…

A review of the current state-of-the-art methodology for handling bias and uncertainty in performing criticality safety evaluations. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Disney, R.K.

1994-10-01

The methodology for handling bias and uncertainty when calculational methods are used in criticality safety evaluations (CSE`s) is a rapidly evolving technology. The changes in the methodology are driven by a number of factors. One factor responsible for changes in the methodology for handling bias and uncertainty in CSE`s within the overview of the US Department of Energy (DOE) is a shift in the overview function from a ``site`` perception to a more uniform or ``national`` perception. Other causes for change or improvement in the methodology for handling calculational bias and uncertainty are; (1) an increased demand for benchmark criticalsmore » data to expand the area (range) of applicability of existing data, (2) a demand for new data to supplement existing benchmark criticals data, (3) the increased reliance on (or need for) computational benchmarks which supplement (or replace) experimental measurements in critical assemblies, and (4) an increased demand for benchmark data applicable to the expanded range of conditions and configurations encountered in DOE site restoration and remediation.« less

78 FR 45052 - Critical Parts for Airplane Propellers; Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-26

..., early warning devices, maintenance checks, and other similar equipment or procedures. If items of the..., and maintenance processes for propeller critical parts. An unintentional error was introduced in Sec... transportation, Aircraft, Aviation safety, Safety. The Correcting Amendment In consideration of the foregoing...

Confidence level estimation in multi-target classification problems

NASA Astrophysics Data System (ADS)

Chang, Shi; Isaacs, Jason; Fu, Bo; Shin, Jaejeong; Zhu, Pingping; Ferrari, Silvia

2018-04-01

This paper presents an approach for estimating the confidence level in automatic multi-target classification performed by an imaging sensor on an unmanned vehicle. An automatic target recognition algorithm comprised of a deep convolutional neural network in series with a support vector machine classifier detects and classifies targets based on the image matrix. The joint posterior probability mass function of target class, features, and classification estimates is learned from labeled data, and recursively updated as additional images become available. Based on the learned joint probability mass function, the approach presented in this paper predicts the expected confidence level of future target classifications, prior to obtaining new images. The proposed approach is tested with a set of simulated sonar image data. The numerical results show that the estimated confidence level provides a close approximation to the actual confidence level value determined a posteriori, i.e. after the new image is obtained by the on-board sensor. Therefore, the expected confidence level function presented in this paper can be used to adaptively plan the path of the unmanned vehicle so as to optimize the expected confidence levels and ensure that all targets are classified with satisfactory confidence after the path is executed.

49 CFR 1103.23 - Confidences of a client.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 8 2010-10-01 2010-10-01 false Confidences of a client. 1103.23 Section 1103.23... Responsibilities Toward A Client § 1103.23 Confidences of a client. (a) The practitioner's duty to preserve his client's confidence outlasts the practitioner's employment by the client, and this duty extends to the...

Food skills confidence and household gatekeepers' dietary practices.

PubMed

Burton, Melissa; Reid, Mike; Worsley, Anthony; Mavondo, Felix

2017-01-01

Household food gatekeepers have the potential to influence the food attitudes and behaviours of family members, as they are mainly responsible for food-related tasks in the home. The aim of this study was to determine the role of gatekeepers' confidence in food-related skills and nutrition knowledge on food practices in the home. An online survey was completed by 1059 Australian dietary gatekeepers selected from the Global Market Insite (GMI) research database. Participants responded to questions about food acquisition and preparation behaviours, the home eating environment, perceptions and attitudes towards food, and demographics. Two-step cluster analysis was used to identify groups based on confidence regarding food skills and nutrition knowledge. Chi-square tests and one-way ANOVAs were used to compare the groups on the dependent variables. Three groups were identified: low confidence, moderate confidence and high confidence. Gatekeepers in the highest confidence group were significantly more likely to report lower body mass index (BMI), and indicate higher importance of fresh food products, vegetable prominence in meals, product information use, meal planning, perceived behavioural control and overall diet satisfaction. Gatekeepers in the lowest confidence group were significantly more likely to indicate more perceived barriers to healthy eating, report more time constraints and more impulse purchasing practices, and higher convenience ingredient use. Other smaller associations were also found. Household food gatekeepers with high food skills confidence were more likely to engage in several healthy food practices, while those with low food skills confidence were more likely to engage in unhealthy food practices. Food education strategies aimed at building food-skills and nutrition knowledge will enable current and future gatekeepers to make healthier food decisions for themselves and for their families. Copyright © 2016 Elsevier Ltd. All rights reserved.

What Are Confidence Judgments Made of? Students' Explanations for Their Confidence Ratings and What that Means for Calibration

ERIC Educational Resources Information Center

Dinsmore, Daniel L.; Parkinson, Meghan M.

2013-01-01

Although calibration has been widely studied, questions remain about how best to capture confidence ratings, how to calculate continuous variable calibration indices, and on what exactly students base their reported confidence ratings. Undergraduates in a research methods class completed a prior knowledge assessment, two sets of readings and…

True and false memories, parietal cortex, and confidence judgments

PubMed Central

Urgolites, Zhisen J.; Smith, Christine N.

2015-01-01

Recent studies have asked whether activity in the medial temporal lobe (MTL) and the neocortex can distinguish true memory from false memory. A frequent complication has been that the confidence associated with correct memory judgments (true memory) is typically higher than the confidence associated with incorrect memory judgments (false memory). Accordingly, it has often been difficult to know whether a finding is related to memory confidence or memory accuracy. In the current study, participants made recognition memory judgments with confidence ratings in response to previously studied scenes and novel scenes. The left hippocampus and 16 other brain regions distinguished true and false memories when confidence ratings were different for the two conditions. Only three regions (all in the parietal cortex) distinguished true and false memories when confidence ratings were equated. These findings illustrate the utility of taking confidence ratings into account when identifying brain regions associated with true and false memories. Neural correlates of true and false memories are most easily interpreted when confidence ratings are similar for the two kinds of memories. PMID:26472645