Design of agricultural product quality safety retrospective supervision system of Jiangsu province

NASA Astrophysics Data System (ADS)

Wang, Kun

2017-08-01

In store and supermarkets to consumers can trace back agricultural products through the electronic province card to query their origin, planting, processing, packaging, testing and other important information and found that the problems. Quality and safety issues can identify the responsibility of the problem. This paper designs a retroactive supervision system for the quality and safety of agricultural products in Jiangsu Province. Based on the analysis of agricultural production and business process, the goal of Jiangsu agricultural product quality safety traceability system construction is established, and the specific functional requirements and non-functioning requirements of the retroactive system are analyzed, and the target is specified for the specific construction of the retroactive system. The design of the quality and safety traceability system in Jiangsu province contains the design of the overall design, the trace code design and the system function module.

Design considerations to enhance the safety of patient compartments in ambulance transporters.

PubMed

Byran, Eyal; Gilad, Issachar

2012-01-01

The safety of the interior of ambulances is dubious and, in the event of sudden impact during emergency transport, potentially perilous to patients they carry. The workplace ergonomics of the interior of the passenger cabin is lacking. This article discusses an improved ergonomic interior design based on study findings, observations and subjective perception. It suggests design aspects and safety concepts aimed at increasing the safety of patients and paramedic staff inside the ambulance as a mobile workstation.

Nuclear Powerplant Safety: Design and Planning.

ERIC Educational Resources Information Center

Department of Energy, Washington, DC. Nuclear Energy Office.

The most important concern in the design, construction and operation of nuclear powerplants is safety. Nuclear power is one of the major contributors to the nation's supply of electricity; therefore, it is important to assure its safe use. Each different type of powerplant has special design features and systems to protect health and safety. One…

OSHA and Experimental Safety Design.

ERIC Educational Resources Information Center

Sichak, Stephen, Jr.

1983-01-01

Suggests that a governmental agency, most likely Occupational Safety and Health Administration (OSHA) be considered in the safety design stage of any experiment. Focusing on OSHA's role, discusses such topics as occupational health hazards of toxic chemicals in laboratories, occupational exposure to benzene, and role/regulations of other agencies.…

Predicting the effectiveness of road safety campaigns through alternative research designs.

PubMed

Adamos, Giannis; Nathanail, Eftihia

2016-12-01

A large number of road safety communication campaigns have been designed and implemented in the recent years; however their explicit impact on driving behavior and road accident rates has been estimated in a rather low proportion. Based on the findings of the evaluation of three road safety communication campaigns addressing the issues of drinking and driving, seat belt usage, and driving fatigue, this paper applies different types of research designs (i.e., experimental, quasi-experimental, and non-experimental designs), when estimating the effectiveness of road safety campaigns, implements a cross-design assessment, and conducts a cross-campaign evaluation. An integrated evaluation plan was developed, taking into account the structure of evaluation questions, the definition of measurable variables, the separation of the target audience into intervention (exposed to the campaign) and control (not exposed to the campaign) groups, the selection of alternative research designs, and the appropriate data collection methods and techniques. Evaluating the implementation of different research designs in estimating the effectiveness of road safety campaigns, results showed that the separate pre-post samples design demonstrated better predictability than other designs, especially in data obtained from the intervention group after the realization of the campaign. The more constructs that were added to the independent variables, the higher the values of the predictability were. The construct that most affects behavior is intention, whereas the rest of the constructs have a lower impact on behavior. This is particularly significant in the Health Belief Model (HBM). On the other hand, behavioral beliefs, normative beliefs, and descriptive norms, are significant parameters for predicting intention according to the Theory of Planned Behavior (TPB). The theoretical and applied implications of alternative research designs and their applicability in the evaluation of road safety

Safety implications from design exceptions.

DOT National Transportation Integrated Search

2002-03-01

The objectives of this study were to: a) summarize past design exceptions to document their frequency and reason for their use and b) determine if any adverse safety implications can be related to adopting design policies and practices related to des...

Participatory design of a preliminary safety checklist for general practice

PubMed Central

Bowie, Paul; Ferguson, Julie; MacLeod, Marion; Kennedy, Susan; de Wet, Carl; McNab, Duncan; Kelly, Moya; McKay, John; Atkinson, Sarah

2015-01-01

Background The use of checklists to minimise errors is well established in high reliability, safety-critical industries. In health care there is growing interest in checklists to standardise checking processes and ensure task completion, and so provide further systemic defences against error and patient harm. However, in UK general practice there is limited experience of safety checklist use. Aim To identify workplace hazards that impact on safety, health and wellbeing, and performance, and codesign a standardised checklist process. Design and setting Application of mixed methods to identify system hazards in Scottish general practices and develop a safety checklist based on human factors design principles. Method A multiprofessional ‘expert’ group (n = 7) and experienced front-line GPs, nurses, and practice managers (n = 18) identified system hazards and developed and validated a preliminary checklist using a combination of literature review, documentation review, consensus building workshops using a mini-Delphi process, and completion of content validity index exercise. Results A prototype safety checklist was developed and validated consisting of six safety domains (for example, medicines management), 22 sub-categories (for example, emergency drug supplies) and 78 related items (for example, stock balancing, secure drug storage, and cold chain temperature recording). Conclusion Hazards in the general practice work system were prioritised that can potentially impact on the safety, health and wellbeing of patients, GP team members, and practice performance, and a necessary safety checklist prototype was designed. However, checklist efficacy in improving safety processes and outcomes is dependent on user commitment, and support from leaders and promotional champions. Although further usability development and testing is necessary, the concept should be of interest in the UK and internationally. PMID:25918338

Safety System Design for Technology Education. A Safety Guide for Technology Education Courses K-12.

ERIC Educational Resources Information Center

North Carolina State Dept. of Public Instruction, Raleigh. Div. of Vocational Education.

This manual is designed to involve both teachers and students in planning and controlling a safety system for technology education classrooms. The safety program involves students in the design and maintenance of the system by including them in the analysis of the classroom environment, job safety analysis, safety inspection, and machine safety…

The European space suit, a design for productivity and crew safety

NASA Astrophysics Data System (ADS)

Skoog, A. Ingemar; Berthier, S.; Ollivier, Y.

In order to fulfil the two major mission objectives, i.e. support planned and unplanned external servicing of the COLUMBUS FFL and support the HERMES vehicle for safety critical operations and emergencies, the European Space Suit System baseline configuration incorporates a number of design features, which shall enhance the productivity and the crew safety of EVA astronauts. The work in EVA is today - and will be for several years - a manual work. Consequently, to improve productivity, the first challenge is to design a suit enclosure which minimizes movement restrictions and crew fatigue. It is covered by the "ergonomic" aspect of the suit design. Furthermore, it is also necessary to help the EVA crewmember in his work, by giving him the right information at the right time. Many solutions exist in this field of Man-Machine Interface, from a very simple system, based on cuff check lists, up to advanced systems, including Head-Up Displays. The design concept for improved productivity encompasses following features: • easy donning/doffing thru rear entry, • suit ergonomy optimisation, • display of operational information in alpha-numerical and graphical from, and • voice processing for operations and safety critical information. Concerning crew safety the major design features are: • a lower R-factor for emergency EVA operations thru incressed suit pressure, • zero prebreath conditions for normal operations, • visual and voice processing of all safety critical functions, and • an autonomous life support system to permit unrestricted operations around HERMES and the CFFL. The paper analyses crew safety and productivity criteria and describes how these features are being built into the design of the European Space Suit System.

The European space suit, a design for productivity and crew safety.

PubMed

Skoog, A I; Berthier, S; Ollivier, Y

1991-01-01

In order to fulfill the two major mission objectives, i.e. support planned and unplanned external servicing of the COLUMBUS FFL and support the HERMES vehicle for safety critical operations and emergencies, the European Space Suit System baseline configuration incorporates a number of design features, which shall enhance the productivity and the crew safety of EVA astronauts. The work in EVA is today--and will be for several years--a manual work. Consequently, to improve productivity, the first challenge is to design a suit enclosure which minimizes movement restrictions and crew fatigue. It is covered by the "ergonomic" aspect of the suit design. Furthermore, it is also necessary to help the EVA crewmember in his work, by giving him the right information at the right time. Many solutions exist in this field of Man-Machine Interface, from a very simple system, based on cuff check lists, up to advanced systems, including Head-Up Displays. The design concept for improved productivity encompasses following features: easy donning/doffing thru rear entry, suit ergonomy optimisation, display of operational information in alpha-numerical and graphical form, and voice processing for operations and safety critical information. Concerning crew safety the major design features are: a lower R-factor for emergency EVA operations thru increased suit pressure, zero prebreath conditions for normal operations, visual and voice processing of all safety critical functions, and an autonomous life support system to permit unrestricted operations around HERMES and the CFFL. The paper analyses crew safety and productivity criteria and describes how these features are being built into the design of the European Space Suit System.

Design for Reliability and Safety Approach for the NASA New Launch Vehicle

NASA Technical Reports Server (NTRS)

Safie, Fayssal, M.; Weldon, Danny M.

2007-01-01

The United States National Aeronautics and Space Administration (NASA) is in the midst of a space exploration program intended for sending crew and cargo to the international Space Station (ISS), to the moon, and beyond. This program is called Constellation. As part of the Constellation program, NASA is developing new launch vehicles aimed at significantly increase safety and reliability, reduce the cost of accessing space, and provide a growth path for manned space exploration. Achieving these goals requires a rigorous process that addresses reliability, safety, and cost upfront and throughout all the phases of the life cycle of the program. This paper discusses the "Design for Reliability and Safety" approach for the NASA new crew launch vehicle called ARES I. The ARES I is being developed by NASA Marshall Space Flight Center (MSFC) in support of the Constellation program. The ARES I consists of three major Elements: A solid First Stage (FS), an Upper Stage (US), and liquid Upper Stage Engine (USE). Stacked on top of the ARES I is the Crew exploration vehicle (CEV). The CEV consists of a Launch Abort System (LAS), Crew Module (CM), Service Module (SM), and a Spacecraft Adapter (SA). The CEV development is being led by NASA Johnson Space Center (JSC). Designing for high reliability and safety require a good integrated working environment and a sound technical design approach. The "Design for Reliability and Safety" approach addressed in this paper discusses both the environment and the technical process put in place to support the ARES I design. To address the integrated working environment, the ARES I project office has established a risk based design group called "Operability Design and Analysis" (OD&A) group. This group is an integrated group intended to bring together the engineering, design, and safety organizations together to optimize the system design for safety, reliability, and cost. On the technical side, the ARES I project has, through the OD

The Role of Probabilistic Design Analysis Methods in Safety and Affordability

NASA Technical Reports Server (NTRS)

Safie, Fayssal M.

2016-01-01

For the last several years, NASA and its contractors have been working together to build space launch systems to commercialize space. Developing commercial affordable and safe launch systems becomes very important and requires a paradigm shift. This paradigm shift enforces the need for an integrated systems engineering environment where cost, safety, reliability, and performance need to be considered to optimize the launch system design. In such an environment, rule based and deterministic engineering design practices alone may not be sufficient to optimize margins and fault tolerance to reduce cost. As a result, introduction of Probabilistic Design Analysis (PDA) methods to support the current deterministic engineering design practices becomes a necessity to reduce cost without compromising reliability and safety. This paper discusses the importance of PDA methods in NASA's new commercial environment, their applications, and the key role they can play in designing reliable, safe, and affordable launch systems. More specifically, this paper discusses: 1) The involvement of NASA in PDA 2) Why PDA is needed 3) A PDA model structure 4) A PDA example application 5) PDA link to safety and affordability.

Mitigating Motion Base Safety Issues: The NASA LaRC CMF Implementation

NASA Technical Reports Server (NTRS)

Bryant, Richard B., Jr.; Grupton, Lawrence E.; Martinez, Debbie; Carrelli, David J.

2005-01-01

The NASA Langley Research Center (LaRC), Cockpit Motion Facility (CMF) motion base design has taken advantage of inherent hydraulic characteristics to implement safety features using hardware solutions only. Motion system safety has always been a concern and its implementation is addressed differently by each organization. Some approaches rely heavily on software safety features. Software which performs safety functions is subject to more scrutiny making its approval, modification, and development time consuming and expensive. The NASA LaRC's CMF motion system is used for research and, as such, requires that the software be updated or modified frequently. The CMF's customers need the ability to update the simulation software frequently without the associated cost incurred with safety critical software. This paper describes the CMF engineering team's approach to achieving motion base safety by designing and implementing all safety features in hardware, resulting in applications software (including motion cueing and actuator dynamic control) being completely independent of the safety devices. This allows the CMF safety systems to remain intact and unaffected by frequent research system modifications.

Computer-based training for safety: comparing methods with older and younger workers.

PubMed

Wallen, Erik S; Mulloy, Karen B

2006-01-01

Computer-based safety training is becoming more common and is being delivered to an increasingly aging workforce. Aging results in a number of changes that make it more difficult to learn from certain types of computer-based training. Instructional designs derived from cognitive learning theories may overcome some of these difficulties. Three versions of computer-based respiratory safety training were shown to older and younger workers who then took a high and a low level learning test. Younger workers did better overall. Both older and younger workers did best with the version containing text with pictures and audio narration. Computer-based training with pictures and audio narration may be beneficial for workers over 45 years of age. Computer-based safety training has advantages but workers of different ages may benefit differently. Computer-based safety programs should be designed and selected based on their ability to effectively train older as well as younger learners.

A Review of Safety and Design Requirements of the Artificial Pancreas.

PubMed

Blauw, Helga; Keith-Hynes, Patrick; Koops, Robin; DeVries, J Hans

2016-11-01

As clinical studies with artificial pancreas systems for automated blood glucose control in patients with type 1 diabetes move to unsupervised real-life settings, product development will be a focus of companies over the coming years. Directions or requirements regarding safety in the design of an artificial pancreas are, however, lacking. This review aims to provide an overview and discussion of safety and design requirements of the artificial pancreas. We performed a structured literature search based on three search components-type 1 diabetes, artificial pancreas, and safety or design-and extended the discussion with our own experiences in developing artificial pancreas systems. The main hazards of the artificial pancreas are over- and under-dosing of insulin and, in case of a bi-hormonal system, of glucagon or other hormones. For each component of an artificial pancreas and for the complete system we identified safety issues related to these hazards and proposed control measures. Prerequisites that enable the control algorithms to provide safe closed-loop control are accurate and reliable input of glucose values, assured hormone delivery and an efficient user interface. In addition, the system configuration has important implications for safety, as close cooperation and data exchange between the different components is essential.

LABORATORY DESIGN CONSIDERATIONS FOR SAFETY.

ERIC Educational Resources Information Center

National Safety Council, Chicago, IL. Campus Safety Association.

THIS SET OF CONSIDERATIONS HAS BEEN PREPARED TO PROVIDE PERSONS WORKING ON THE DESIGN OF NEW OR REMODELED LABORATORY FACILITIES WITH A SUITABLE REFERENCE GUIDE TO DESIGN SAFETY. THERE IS NO DISTINCTION BETWEEN TYPES OF LABORATORY AND THE EMPHASIS IS ON GIVING GUIDES AND ALTERNATIVES RATHER THAN DETAILED SPECIFICATIONS. AREAS COVERED INCLUDE--(1)…

Generation III reactors safety requirements and the design solutions

NASA Astrophysics Data System (ADS)

Felten, P.

2009-03-01

Nuclear energy's public acceptance, and hence its development, depends on its safety. As a reactor designer, we will first briefly remind the basic safety principles of nuclear reactors' design. We will then show how the industry, and in particular Areva with its EPR, made design evolution in the wake of the Three Miles Island accident in 1979. In particular, for this new generation of reactors, severe accidents are taken into account beyond the standard design basis accidents. Today, Areva's EPR meets all so-called "generation III" safety requirements and was licensed by several nuclear safety authorities in the world. Many innovative solutions are integrated in the EPR, some of which will be introduced here.

FFTF Passive Safety Test Data for Benchmarks for New LMR Designs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wootan, David W.; Casella, Andrew M.

Liquid Metal Reactors (LMRs) continue to be considered as an attractive concept for advanced reactor design. Software packages such as SASSYS are being used to im-prove new LMR designs and operating characteristics. Significant cost and safety im-provements can be realized in advanced liquid metal reactor designs by emphasizing inherent or passive safety through crediting the beneficial reactivity feedbacks associ-ated with core and structural movement. This passive safety approach was adopted for the Fast Flux Test Facility (FFTF), and an experimental program was conducted to characterize the structural reactivity feedback. The FFTF passive safety testing pro-gram was developed to examine howmore » specific design elements influenced dynamic re-activity feedback in response to a reactivity input and to demonstrate the scalability of reactivity feedback results to reactors of current interest. The U.S. Department of En-ergy, Office of Nuclear Energy Advanced Reactor Technology program is in the pro-cess of preserving, protecting, securing, and placing in electronic format information and data from the FFTF, including the core configurations and data collected during the passive safety tests. Benchmarks based on empirical data gathered during operation of the Fast Flux Test Facility (FFTF) as well as design documents and post-irradiation examination will aid in the validation of these software packages and the models and calculations they produce. Evaluation of these actual test data could provide insight to improve analytical methods which may be used to support future licensing applications for LMRs« less

Overview of Risk Mitigation for Safety-Critical Computer-Based Systems

NASA Technical Reports Server (NTRS)

Torres-Pomales, Wilfredo

2015-01-01

This report presents a high-level overview of a general strategy to mitigate the risks from threats to safety-critical computer-based systems. In this context, a safety threat is a process or phenomenon that can cause operational safety hazards in the form of computational system failures. This report is intended to provide insight into the safety-risk mitigation problem and the characteristics of potential solutions. The limitations of the general risk mitigation strategy are discussed and some options to overcome these limitations are provided. This work is part of an ongoing effort to enable well-founded assurance of safety-related properties of complex safety-critical computer-based aircraft systems by developing an effective capability to model and reason about the safety implications of system requirements and design.

Design an optimum safety policy for personnel safety management - A system dynamic approach

NASA Astrophysics Data System (ADS)

Balaji, P.

2014-10-01

Personnel safety management (PSM) ensures that employee's work conditions are healthy and safe by various proactive and reactive approaches. Nowadays it is a complex phenomenon because of increasing dynamic nature of organisations which results in an increase of accidents. An important part of accident prevention is to understand the existing system properly and make safety strategies for that system. System dynamics modelling appears to be an appropriate methodology to explore and make strategy for PSM. Many system dynamics models of industrial systems have been built entirely for specific host firms. This thesis illustrates an alternative approach. The generic system dynamics model of Personnel safety management was developed and tested in a host firm. The model was undergone various structural, behavioural and policy tests. The utility and effectiveness of model was further explored through modelling a safety scenario. In order to create effective safety policy under resource constraint, DOE (Design of experiment) was used. DOE uses classic designs, namely, fractional factorials and central composite designs. It used to make second order regression equation which serve as an objective function. That function was optimized under budget constraint and optimum value used for safety policy which shown greatest improvement in overall PSM. The outcome of this research indicates that personnel safety management model has the capability for acting as instruction tool to improve understanding of safety management and also as an aid to policy making.

Design an optimum safety policy for personnel safety management - A system dynamic approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Balaji, P.

2014-10-06

Personnel safety management (PSM) ensures that employee's work conditions are healthy and safe by various proactive and reactive approaches. Nowadays it is a complex phenomenon because of increasing dynamic nature of organisations which results in an increase of accidents. An important part of accident prevention is to understand the existing system properly and make safety strategies for that system. System dynamics modelling appears to be an appropriate methodology to explore and make strategy for PSM. Many system dynamics models of industrial systems have been built entirely for specific host firms. This thesis illustrates an alternative approach. The generic system dynamicsmore » model of Personnel safety management was developed and tested in a host firm. The model was undergone various structural, behavioural and policy tests. The utility and effectiveness of model was further explored through modelling a safety scenario. In order to create effective safety policy under resource constraint, DOE (Design of experiment) was used. DOE uses classic designs, namely, fractional factorials and central composite designs. It used to make second order regression equation which serve as an objective function. That function was optimized under budget constraint and optimum value used for safety policy which shown greatest improvement in overall PSM. The outcome of this research indicates that personnel safety management model has the capability for acting as instruction tool to improve understanding of safety management and also as an aid to policy making.« less

Portable Nanoparticle-Based Sensors for Food Safety Assessment

PubMed Central

Bülbül, Gonca; Hayat, Akhtar; Andreescu, Silvana

2015-01-01

The use of nanotechnology-derived products in the development of sensors and analytical measurement methodologies has increased significantly over the past decade. Nano-based sensing approaches include the use of nanoparticles (NPs) and nanostructures to enhance sensitivity and selectivity, design new detection schemes, improve sample preparation and increase portability. This review summarizes recent advancements in the design and development of NP-based sensors for assessing food safety. The most common types of NPs used to fabricate sensors for detection of food contaminants are discussed. Selected examples of NP-based detection schemes with colorimetric and electrochemical detection are provided with focus on sensors for the detection of chemical and biological contaminants including pesticides, heavy metals, bacterial pathogens and natural toxins. Current trends in the development of low-cost portable NP-based technology for rapid assessment of food safety as well as challenges for practical implementation and future research directions are discussed. PMID:26690169

Improving patient safety by instructional systems design

PubMed Central

Battles, J B

2006-01-01

Education and training are important elements in patient safety, both as a potential contributing factor to risks and hazards of healthcare associated injury or harm and as an intervention to be used in eliminating or preventing such harm. All too often we have relied on training as the only interventions for patient safety without examining other alternatives or realizing that, in some cases, the training systems themselves are part of the problem. One way to ensure safety by design is to apply established design principles to education and training. Instructional systems design (ISD) is a systematic method of development of education and training programs for improved learner performance. The ISD process involves five integrated steps: analysis, development, design, implementation, and evaluation (ADDIE). The application of ISD using the ADDIE approach can eliminate or prevent education and training from being a contributing factor of health associated injury or harm, and can also be effective in preventing injury or harm. PMID:17142604

SAFETY IN THE DESIGN OF SCIENCE LABORATORIES AND BUILDING CODES.

ERIC Educational Resources Information Center

HOROWITZ, HAROLD

THE DESIGN OF COLLEGE AND UNIVERSITY BUILDINGS USED FOR SCIENTIFIC RESEARCH AND EDUCATION IS DISCUSSED IN TERMS OF LABORATORY SAFETY AND BUILDING CODES AND REGULATIONS. MAJOR TOPIC AREAS ARE--(1) SAFETY RELATED DESIGN FEATURES OF SCIENCE LABORATORIES, (2) LABORATORY SAFETY AND BUILDING CODES, AND (3) EVIDENCE OF UNSAFE DESIGN. EXAMPLES EMPHASIZE…

Safety in passenger ships: The influence of environmental design characteristics on people's perception of safety.

PubMed

Ahola, Markus; Mugge, Ruth

2017-03-01

Although objective safety is a widely studied topic in ergonomics, subjective safety has received far less research attention. Nevertheless, most of human decision-making and behavior depends on how we perceive our environment. This study investigates the effects of various environmental design characteristics on people's safety perception in a passenger ship context. Five different environmental design characteristics were manipulated to increase the openness of the space or to create more clear navigation, resulting in 20 different cabin corridors for a passenger ship. Ninety-seven respondents were asked to rate these corridors on the perceived safety in an experiment. The results showed that people feel more safe when the corridors have a curved ceiling, when the walls do not have a split-level design, and when there is a view to the outside. Designers can use these insights when designing future environments. Copyright © 2016 Elsevier Ltd. All rights reserved.

Integrating Safety and Mission Assurance in Design

NASA Technical Reports Server (NTRS)

Cianciola, Chris; Crane, Kenneth

2008-01-01

This presentation describes how the Ares Projects are learning from the successes and failures of previous launch systems in order to maximize safety and reliability while maintaining fiscal responsibility. The Ares Projects are integrating Safety and Mission Assurance into design activities and embracing independent assessments by Quality experts in thorough reviews of designs and processes. Incorporating Lean thinking into the design process, Ares is also streamlining existing processes and future manufacturing flows which will yield savings during production. Understanding the value of early involvement of Quality experts, the Ares Projects are leading launch vehicle development into the 21st century.

Manned space flight nuclear system safety. Volume 3: Reactor system preliminary nuclear safety analysis. Part 1: Reference Design Document (RDD)

NASA Technical Reports Server (NTRS)

1972-01-01

The Reference Design Document, of the Preliminary Safety Analysis Report (PSAR) - Reactor System provides the basic design and operations data used in the nuclear safety analysis of the Rector Power Module as applied to a Space Base program. A description of the power module systems, facilities, launch vehicle and mission operations, as defined in NASA Phase A Space Base studies is included. Each of two Zirconium Hydride Reactor Brayton power modules provides 50 kWe for the nominal 50 man Space Base. The INT-21 is the prime launch vehicle. Resupply to the 500 km orbit over the ten year mission is provided by the Space Shuttle. At the end of the power module lifetime (nominally five years), a reactor disposal system is deployed for boost into a 990 km high altitude (long decay time) earth orbit.

Control centers design for ergonomics and safety.

PubMed

Quintana, Leonardo; Lizarazo, Cesar; Bernal, Oscar; Cordoba, Jorge; Arias, Claudia; Monroy, Magda; Cotrino, Carlos; Montoya, Olga

2012-01-01

This paper shows the general design conditions about ergonomics and safety for control centers in the petrochemical process industry. Some of the topics include guidelines for the optimized workstation design, control room layout, building layout, and lighting, acoustical and environmental design. Also takes into account the safety parameters in the control rooms and centers design. The conditions and parameters shown in this paper come from the standards and global advances on this topic on the most recent publications. And also the work was supplemented by field visits of our team to the control center operations in a petrochemical company, and technical literature search efforts. This guideline will be useful to increase the productivity and improve the working conditions at the control rooms.

Principles and Benefits of Explicitly Designed Medical Device Safety Architecture.

PubMed

Larson, Brian R; Jones, Paul; Zhang, Yi; Hatcliff, John

The complexity of medical devices and the processes by which they are developed pose considerable challenges to producing safe designs and regulatory submissions that are amenable to effective reviews. Designing an appropriate and clearly documented architecture can be an important step in addressing this complexity. Best practices in medical device design embrace the notion of a safety architecture organized around distinct operation and safety requirements. By explicitly separating many safety-related monitoring and mitigation functions from operational functionality, the aspects of a device most critical to safety can be localized into a smaller and simpler safety subsystem, thereby enabling easier verification and more effective reviews of claims that causes of hazardous situations are detected and handled properly. This article defines medical device safety architecture, describes its purpose and philosophy, and provides an example. Although many of the presented concepts may be familiar to those with experience in realization of safety-critical systems, this article aims to distill the essence of the approach and provide practical guidance that can potentially improve the quality of device designs and regulatory submissions.

European Workshop Industrical Computer Science Systems approach to design for safety

NASA Technical Reports Server (NTRS)

Zalewski, Janusz

1992-01-01

This paper presents guidelines on designing systems for safety, developed by the Technical Committee 7 on Reliability and Safety of the European Workshop on Industrial Computer Systems. The focus is on complementing the traditional development process by adding the following four steps: (1) overall safety analysis; (2) analysis of the functional specifications; (3) designing for safety; (4) validation of design. Quantitative assessment of safety is possible by means of a modular questionnaire covering various aspects of the major stages of system development.

[Safety culture: definition, models and design].

PubMed

Pfaff, Holger; Hammer, Antje; Ernstmann, Nicole; Kowalski, Christoph; Ommen, Oliver

2009-01-01

Safety culture is a multi-dimensional phenomenon. Safety culture of a healthcare organization is high if it has a common stock in knowledge, values and symbols in regard to patients' safety. The article intends to define safety culture in the first step and, in the second step, demonstrate the effects of safety culture. We present the model of safety behaviour and show how safety culture can affect behaviour and produce safe behaviour. In the third step we will look at the causes of safety culture and present the safety-culture-model. The main hypothesis of this model is that the safety culture of a healthcare organization strongly depends on its communication culture and its social capital. Finally, we will investigate how the safety culture of a healthcare organization can be improved. Based on the safety culture model six measures to improve safety culture will be presented.

Advanced Test Reactor Safety Basis Upgrade Lessons Learned Relative to Design Basis Verification and Safety Basis Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

G. L. Sharp; R. T. McCracken

The Advanced Test Reactor (ATR) is a pressurized light-water reactor with a design thermal power of 250 MW. The principal function of the ATR is to provide a high neutron flux for testing reactor fuels and other materials. The reactor also provides other irradiation services such as radioisotope production. The ATR and its support facilities are located at the Test Reactor Area of the Idaho National Engineering and Environmental Laboratory (INEEL). An audit conducted by the Department of Energy's Office of Independent Oversight and Performance Assurance (DOE OA) raised concerns that design conditions at the ATR were not adequately analyzedmore » in the safety analysis and that legacy design basis management practices had the potential to further impact safe operation of the facility.1 The concerns identified by the audit team, and issues raised during additional reviews performed by ATR safety analysts, were evaluated through the unreviewed safety question process resulting in shutdown of the ATR for more than three months while these concerns were resolved. Past management of the ATR safety basis, relative to facility design basis management and change control, led to concerns that discrepancies in the safety basis may have developed. Although not required by DOE orders or regulations, not performing design basis verification in conjunction with development of the 10 CFR 830 Subpart B upgraded safety basis allowed these potential weaknesses to be carried forward. Configuration management and a clear definition of the existing facility design basis have a direct relation to developing and maintaining a high quality safety basis which properly identifies and mitigates all hazards and postulated accident conditions. These relations and the impact of past safety basis management practices have been reviewed in order to identify lessons learned from the safety basis upgrade process and appropriate actions to resolve possible concerns with respect to the current ATR

Safety impacts of Design Exceptions in Utah

DOT National Transportation Integrated Search

2012-06-01

The objective of this research was to compare safety, measured by expected crash frequency and severity, on road segments where design exceptions were approved and constructed to similar road segments where no design exceptions were approved or const...

Safety Impacts of Design Exceptions in Utah

DOT National Transportation Integrated Search

2012-08-01

The objective of this research was to compare safety, measured by expected crash frequency and severity, on road segments where design exceptions were approved and constructed to similar road segments where no design exceptions were approved or const...

Challenges in Developing Competency-based Training Curriculum for Food Safety Regulators in India

PubMed Central

Thippaiah, Anitha; Allagh, Komal Preet; Murthy, G. V.

2014-01-01

Context: The Food Safety and Standards Act have redefined the roles and responsibilities of food regulatory workforce and calls for highly skilled human resources as it involves complex management procedures. Aims: 1) Identify the competencies needed among the food regulatory workforce in India. 2) Develop a competency-based training curriculum for food safety regulators in the country. 3) Develop training materials for use to train the food regulatory workforce. Settings and Design: The Indian Institute of Public Health, Hyderabad, led the development of training curriculum on food safety with technical assistance from the Royal Society for Public Health, UK and the National Institute of Nutrition, India. The exercise was to facilitate the implementation of new Act by undertaking capacity building through a comprehensive training program. Materials and Methods: A competency-based training needs assessment was conducted before undertaking the development of the training materials. Results: The training program for Food Safety Officers was designed to comprise of five modules to include: Food science and technology, Food safety management systems, Food safety legislation, Enforcement of food safety regulations, and Administrative functions. Each module has a facilitator guide for the tutor and a handbook for the participant. Essentials of Food Hygiene-I (Basic level), II and III (Retail/ Catering/ Manufacturing) were primarily designed for training of food handlers and are part of essential reading for food safety regulators. Conclusion: The Food Safety and Standards Act calls for highly skilled human resources as it involves complex management procedures. Despite having developed a comprehensive competency-based training curriculum by joint efforts by the local, national, and international agencies, implementation remains a challenge in resource-limited setting. PMID:25136155

CSHM: Web-based safety and health monitoring system for construction management.

PubMed

Cheung, Sai On; Cheung, Kevin K W; Suen, Henry C H

2004-01-01

This paper describes a web-based system for monitoring and assessing construction safety and health performance, entitled the Construction Safety and Health Monitoring (CSHM) system. The design and development of CSHM is an integration of internet and database systems, with the intent to create a total automated safety and health management tool. A list of safety and health performance parameters was devised for the management of safety and health in construction. A conceptual framework of the four key components of CSHM is presented: (a) Web-based Interface (templates); (b) Knowledge Base; (c) Output Data; and (d) Benchmark Group. The combined effect of these components results in a system that enables speedy performance assessment of safety and health activities on construction sites. With the CSHM's built-in functions, important management decisions can theoretically be made and corrective actions can be taken before potential hazards turn into fatal or injurious occupational accidents. As such, the CSHM system will accelerate the monitoring and assessing of performance safety and health management tasks.

ECC-based grouping-proof RFID for inpatient medication safety.

PubMed

Lin, Qiping; Zhang, Fangguo

2012-12-01

Several papers were proposed in which symmetric cryptography was used to design RFID grouping-proof for medication safety in the Journal of Medical Systems. However, if we want to ensure privacy, authentication and protection against the tracking of RFID-tags without losing system scalability, we must design an asymmetric cryptography-based RFID. This paper will propose a new ECC-based grouping-proof for RFID. Our ECC-based grouping-proof reduces the computation of tags and prevents timeout problems from occurring in n-party grouping-proof protocol. Based on asymmetric cryptography, the proposed scheme is practical, secure and efficient for medication applications.

Cyber Security Threats to Safety-Critical, Space-Based Infrastructures

NASA Astrophysics Data System (ADS)

Johnson, C. W.; Atencia Yepez, A.

2012-01-01

Space-based systems play an important role within national critical infrastructures. They are being integrated into advanced air-traffic management applications, rail signalling systems, energy distribution software etc. Unfortunately, the end users of communications, location sensing and timing applications often fail to understand that these infrastructures are vulnerable to a wide range of security threats. The following pages focus on concerns associated with potential cyber-attacks. These are important because future attacks may invalidate many of the safety assumptions that support the provision of critical space-based services. These safety assumptions are based on standard forms of hazard analysis that ignore cyber-security considerations This is a significant limitation when, for instance, security attacks can simultaneously exploit multiple vulnerabilities in a manner that would never occur without a deliberate enemy seeking to damage space based systems and ground infrastructures. We address this concern through the development of a combined safety and security risk assessment methodology. The aim is to identify attack scenarios that justify the allocation of additional design resources so that safety barriers can be strengthened to increase our resilience against security threats.

Improving construction site safety through leader-based verbal safety communication.

PubMed

Kines, Pete; Andersen, Lars P S; Spangenberg, Soren; Mikkelsen, Kim L; Dyreborg, Johnny; Zohar, Dov

2010-10-01

The construction industry is one of the most injury-prone industries, in which production is usually prioritized over safety in daily on-site communication. Workers have an informal and oral culture of risk, in which safety is rarely openly expressed. This paper tests the effect of increasing leader-based on-site verbal safety communication on the level of safety and safety climate at construction sites. A pre-post intervention-control design with five construction work gangs is carried out. Foremen in two intervention groups are coached and given bi-weekly feedback about their daily verbal safety communications with their workers. Foremen-worker verbal safety exchanges (experience sampling method, n=1,693 interviews), construction site safety level (correct vs. incorrect, n=22,077 single observations), and safety climate (seven dimensions, n=105 questionnaires) are measured over a period of up to 42 weeks. Baseline measurements in the two intervention and three control groups reveal that foremen speak with their workers several times a day. Workers perceive safety as part of their verbal communication with their foremen in only 6-16% of exchanges, and the levels of safety at the sites range from 70-87% (correct observations). Measurements from baseline to follow-up in the two intervention groups reveal that safety communication between foremen and workers increases significantly in one of the groups (factor 7.1 increase), and a significant yet smaller increase is found when the two intervention groups are combined (factor 4.6). Significant increases in the level of safety are seen in both intervention groups (7% and 12% increases, respectively), particularly in regards to 'access ways' and 'railings and coverings' (39% and 84% increases, respectively). Increases in safety climate are seen in only one of the intervention groups with respect to their 'attention to safety.' No significant trend changes are seen in the three control groups on any of the three measures

Enhancing the traditional hospital design process: a focus on patient safety.

PubMed

Reiling, John G; Knutzen, Barbara L; Wallen, Thomas K; McCullough, Susan; Miller, Ric; Chernos, Sonja

2004-03-01

In 2002 St. Joseph's Community Hospital (West Bend, WI), a member of SynergyHealth, brought together leaders in health care and systems engineering to develop a set of safety-driven facility design principles that would guide the hospital design process. DESIGNING FOR SAFETY: Hospital leadership recognized that a cross-departmental team approach would be needed and formed the 11-member Facility Design Advisory Council, which, with departmental teams and the aid of architects, was responsible for overseeing the design process and for ensuring that the safety considerations were met. The design process was a team approach, with input from national experts, patients and families, hospital staff and physicians, architects, contractors, and the community. The new facility, designed using safety-driven design principles, reflects many innovative design elements, including truly standardized patient rooms, new technology to minimize falls, and patient care alcoves for every patient room. The new hospital has been designed with maximum adaptability and flexibility in mind, to accommodate changes and provide for future growth. The architects labeled the innovative design. The Synergy Model, to describe the process of shaping the entire building and its spaces to work efficiently as a whole for the care and safety of patients. Construction began on the new facility in August 2003 and is expected to be completed in 2005.

48 CFR 52.250-3 - SAFETY Act Block Designation/Certification.

Code of Federal Regulations, 2012 CFR

2012-10-01

... QATTs have been deployed. It also confers other important benefits. SAFETY Act designation and SAFETY... or requests may be mailed to: Directorate of Science and Technology, SAFETY Act/Room 4320, Department...

48 CFR 52.250-3 - SAFETY Act Block Designation/Certification.

Code of Federal Regulations, 2013 CFR

2013-10-01

... QATTs have been deployed. It also confers other important benefits. SAFETY Act designation and SAFETY... or requests may be mailed to: Directorate of Science and Technology, SAFETY Act/Room 4320, Department...

48 CFR 52.250-3 - SAFETY Act Block Designation/Certification.

Code of Federal Regulations, 2011 CFR

2011-10-01

... QATTs have been deployed. It also confers other important benefits. SAFETY Act designation and SAFETY... or requests may be mailed to: Directorate of Science and Technology, SAFETY Act/Room 4320, Department...

48 CFR 52.250-3 - SAFETY Act Block Designation/Certification.

Code of Federal Regulations, 2010 CFR

2010-10-01

... QATTs have been deployed. It also confers other important benefits. SAFETY Act designation and SAFETY... or requests may be mailed to: Directorate of Science and Technology, SAFETY Act/Room 4320, Department...

48 CFR 52.250-3 - SAFETY Act Block Designation/Certification.

Code of Federal Regulations, 2014 CFR

2014-10-01

... QATTs have been deployed. It also confers other important benefits. SAFETY Act designation and SAFETY... or requests may be mailed to: Directorate of Science and Technology, SAFETY Act/Room 4320, Department...

Safety and design in airplane construction

NASA Technical Reports Server (NTRS)

Teichmann, Alfred

1934-01-01

The author gives a survey of the principles of stress analysis and design of airplane structures, and discusses the fundamental strength specifications and their effect on the stress analysis as compared with the safety factors used in other branches of engineering.

Impact of Passive Safety on FHR Instrumentation Systems Design and Classification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holcomb, David Eugene

2015-01-01

Fluoride salt-cooled high-temperature reactors (FHRs) will rely more extensively on passive safety than earlier reactor classes. 10CFR50 Appendix A, General Design Criteria for Nuclear Power Plants, establishes minimum design requirements to provide reasonable assurance of adequate safety. 10CFR50.69, Risk-Informed Categorization and Treatment of Structures, Systems and Components for Nuclear Power Reactors, provides guidance on how the safety significance of systems, structures, and components (SSCs) should be reflected in their regulatory treatment. The Nuclear Energy Institute (NEI) has provided 10 CFR 50.69 SSC Categorization Guideline (NEI-00-04) that factors in probabilistic risk assessment (PRA) model insights, as well as deterministic insights, throughmore » an integrated decision-making panel. Employing the PRA to inform deterministic requirements enables an appropriately balanced, technically sound categorization to be established. No FHR currently has an adequate PRA or set of design basis accidents to enable establishing the safety classification of its SSCs. While all SSCs used to comply with the general design criteria (GDCs) will be safety related, the intent is to limit the instrumentation risk significance through effective design and reliance on inherent passive safety characteristics. For example, FHRs have no safety-significant temperature threshold phenomena, thus enabling the primary and reserve reactivity control systems required by GDC 26 to be passively, thermally triggered at temperatures well below those for which core or primary coolant boundary damage would occur. Moreover, the passive thermal triggering of the primary and reserve shutdown systems may relegate the control rod drive motors to the control system, substantially decreasing the amount of safety-significant wiring needed. Similarly, FHR decay heat removal systems are intended to be running continuously to minimize the amount of safety-significant instrumentation needed to

A safety-based decision making architecture for autonomous systems

NASA Technical Reports Server (NTRS)

Musto, Joseph C.; Lauderbaugh, L. K.

1991-01-01

Engineering systems designed specifically for space applications often exhibit a high level of autonomy in the control and decision-making architecture. As the level of autonomy increases, more emphasis must be placed on assimilating the safety functions normally executed at the hardware level or by human supervisors into the control architecture of the system. The development of a decision-making structure which utilizes information on system safety is detailed. A quantitative measure of system safety, called the safety self-information, is defined. This measure is analogous to the reliability self-information defined by McInroy and Saridis, but includes weighting of task constraints to provide a measure of both reliability and cost. An example is presented in which the safety self-information is used as a decision criterion in a mobile robot controller. The safety self-information is shown to be consistent with the entropy-based Theory of Intelligent Machines defined by Saridis.

Evaluation of the safety performance of highway alignments based on fault tree analysis and safety boundaries.

PubMed

Chen, Yikai; Wang, Kai; Xu, Chengcheng; Shi, Qin; He, Jie; Li, Peiqing; Shi, Ting

2018-05-19

To overcome the limitations of previous highway alignment safety evaluation methods, this article presents a highway alignment safety evaluation method based on fault tree analysis (FTA) and the characteristics of vehicle safety boundaries, within the framework of dynamic modeling of the driver-vehicle-road system. Approaches for categorizing the vehicle failure modes while driving on highways and the corresponding safety boundaries were comprehensively investigated based on vehicle system dynamics theory. Then, an overall crash probability model was formulated based on FTA considering the risks of 3 failure modes: losing steering capability, losing track-holding capability, and rear-end collision. The proposed method was implemented on a highway segment between Bengbu and Nanjing in China. A driver-vehicle-road multibody dynamics model was developed based on the 3D alignments of the Bengbu to Nanjing section of Ning-Luo expressway using Carsim, and the dynamics indices, such as sideslip angle and, yaw rate were obtained. Then, the average crash probability of each road section was calculated with a fixed-length method. Finally, the average crash probability was validated against the crash frequency per kilometer to demonstrate the accuracy of the proposed method. The results of the regression analysis and correlation analysis indicated good consistency between the results of the safety evaluation and the crash data and that it outperformed the safety evaluation methods used in previous studies. The proposed method has the potential to be used in practical engineering applications to identify crash-prone locations and alignment deficiencies on highways in the planning and design phases, as well as those in service.

Behavior-based safety on construction sites: a case study.

PubMed

Choudhry, Rafiq M

2014-09-01

This work presents the results of a case study and describes an important area within the field of construction safety management, namely behavior-based safety (BBS). This paper adopts and develops a management approach for safety improvements in construction site environments. A rigorous behavioral safety system and its intervention program was implemented and deployed on target construction sites. After taking a few weeks of safety behavior measurements, the project management team implemented the designed intervention and measurements were taken. Goal-setting sessions were arranged on-site with workers' participation to set realistic and attainable targets of performance. Safety performance measurements continued and the levels of performance and the targets were presented on feedback charts. Supervisors were asked to give workers recognition and praise when they acted safely or improved critical behaviors. Observers were requested to have discussions with workers, visit the site, distribute training materials to workers, and provide feedback to crews and display charts. They were required to talk to operatives in the presence of line managers. It was necessary to develop awareness and understanding of what was being measured. In the process, operatives learned how to act safely when conducting site tasks using the designed checklists. Current weekly scores were discussed in the weekly safety meetings and other operational site meetings with emphasis on how to achieve set targets. The reliability of the safety performance measures taken by the company's observers was monitored. A clear increase in safety performance level was achieved across all categories: personal protective equipment; housekeeping; access to heights; plant and equipment, and scaffolding. The research reveals that scores of safety performance at one project improved from 86% (at the end of 3rd week) to 92.9% during the 9th week. The results of intervention demonstrated large decreases in

Safety Aspects of Big Cryogenic Systems Design

NASA Astrophysics Data System (ADS)

Chorowski, M.; Fydrych, J.; Poliński, J.

2010-04-01

Superconductivity and helium cryogenics are key technologies in the construction of large scientific instruments, like accelerators, fusion reactors or free electron lasers. Such cryogenic systems may contain more than hundred tons of helium, mostly in cold and high-density phases. In spite of the high reliability of the systems, accidental loss of the insulation vacuum, pipe rupture or rapid energy dissipation in the cold helium can not be overlooked. To avoid the danger of over-design pressure rise in the cryostats, they need to be equipped with a helium relief system. Such a system is comprised of safety valves, bursting disks and optionally cold or warm quench lines, collectors and storage tanks. Proper design of the helium safety relief system requires a good understanding of worst case scenarios. Such scenarios will be discussed, taking into account different possible failures of the cryogenic system. In any case it is necessary to estimate heat transfer through degraded vacuum superinsulation and mass flow through the valves and safety disks. Even if the design of the helium relief system does not foresee direct helium venting into the environment, an occasional emergency helium spill may happen. Helium propagation in the atmosphere and the origins of oxygen-deficiency hazards will be discussed.

The interaction between design and occupier behaviour in the safety of new homes.

PubMed

McDermott, Hilary; Haslam, Roger; Gibb, Alistair

2007-03-01

The design of new homes includes many safety features intended to protect occupiers from injury or ill health within the home, however the effectiveness of these primary intervention measures is likely to be affected by user behaviour. This study examined the interaction between user activity and dwelling design and how this might affect health and safety. It aimed to identify how people use features within new homes and how this may limit the protection afforded by building design, codes and regulations. Forty, home-based, semi-structured, in-depth interviews and home inspections were conducted with individuals recently inhabiting a new home. A range of behaviours were reported in relation to building features including fire doors, pipes and cables, and loft access, which may lead to increased risk of injury or ill-health. For example, occupiers described interfering with the self-closing mechanisms on fire doors and drilling into walls without considering the location of services. They also reported knowingly engaging in unsafe behaviour when accessing the loft, increasing their risk of falls. The accounts suggest that designers and builders need to give greater consideration to how occupier behaviour interacts with building features so that improvements in both design and occupier education can lead to improved health and safety.

Epidemiological designs for vaccine safety assessment: methods and pitfalls.

PubMed

Andrews, Nick

2012-09-01

Three commonly used designs for vaccine safety assessment post licensure are cohort, case-control and self-controlled case series. These methods are often used with routine health databases and immunisation registries. This paper considers the issues that may arise when designing an epidemiological study, such as understanding the vaccine safety question, case definition and finding, limitations of data sources, uncontrolled confounding, and pitfalls that apply to the individual designs. The example of MMR and autism, where all three designs have been used, is presented to help consider these issues. Copyright © 2011 The International Alliance for Biological Standardization. Published by Elsevier Ltd. All rights reserved.

Primary battery design and safety guidelines handbook

NASA Technical Reports Server (NTRS)

Bragg, Bobby J.; Casey, John E.; Trout, J. Barry

1994-01-01

This handbook provides engineers and safety personnel with guidelines for the safe design or selection and use of primary batteries in spaceflight programs. Types of primary batteries described are silver oxide zinc alkaline, carbon-zinc, zinc-air alkaline, manganese dioxide-zionc alkaline, mercuric oxide-zinc alkaline, and lithium anode cells. Along with typical applications, the discussions of the individual battery types include electrochemistry, construction, capacities and configurations, and appropriate safety measures. A chapter on general battery safety covers hazard sources and controls applicable to all battery types. Guidelines are given for qualification and acceptance testing that should precede space applications. Permissible failure levels for NASA applications are discussed.

Challenges in Developing Competency-based Training Curriculum for Food Safety Regulators in India.

PubMed

Thippaiah, Anitha; Allagh, Komal Preet; Murthy, G V

2014-07-01

The Food Safety and Standards Act have redefined the roles and responsibilities of food regulatory workforce and calls for highly skilled human resources as it involves complex management procedures. 1) Identify the competencies needed among the food regulatory workforce in India. 2) Develop a competency-based training curriculum for food safety regulators in the country. 3) Develop training materials for use to train the food regulatory workforce. The Indian Institute of Public Health, Hyderabad, led the development of training curriculum on food safety with technical assistance from the Royal Society for Public Health, UK and the National Institute of Nutrition, India. The exercise was to facilitate the implementation of new Act by undertaking capacity building through a comprehensive training program. A competency-based training needs assessment was conducted before undertaking the development of the training materials. THE TRAINING PROGRAM FOR FOOD SAFETY OFFICERS WAS DESIGNED TO COMPRISE OF FIVE MODULES TO INCLUDE: Food science and technology, Food safety management systems, Food safety legislation, Enforcement of food safety regulations, and Administrative functions. Each module has a facilitator guide for the tutor and a handbook for the participant. Essentials of Food Hygiene-I (Basic level), II and III (Retail/ Catering/ Manufacturing) were primarily designed for training of food handlers and are part of essential reading for food safety regulators. The Food Safety and Standards Act calls for highly skilled human resources as it involves complex management procedures. Despite having developed a comprehensive competency-based training curriculum by joint efforts by the local, national, and international agencies, implementation remains a challenge in resource-limited setting.

School-Based and Community-Based Gun Safety Educational Strategies for Injury Prevention.

PubMed

Holly, Cheryl; Porter, Sallie; Kamienski, Mary; Lim, Aubrianne

2018-05-01

Nearly 1,300 children in the United States die because of firearm-related injury each year and another 5,790 survive gunshot wounds, making the prevention of firearm-related unintentional injury to children of vital importance to families, health professionals, and policy makers. To systematically review the evidence on school-based and community-based gun safety programs for children aged 3 to 18 years. Systematic review. Twelve databases were searched from their earliest records to December 2016. Interventional and analytic studies were sought, including randomized controlled trials, quasi-experimental studies, as well as before-and-after studies or cohort studies with or without a control that involved an intervention. The low level of evidence, heterogeneity of studies, and lack of consistent outcome measures precluded a pooled estimate of results. A best evidence synthesis was performed. Results support the premise that programs using either knowledge-based or active learning strategies or a combination of these may be insufficient for teaching gun safety skills to children. Gun safety programs do not improve the likelihood that children will not handle firearms in an unsupervised situation. Stronger research designs with larger samples are needed to determine the most effective way to transfer the use of the gun safety skills outside the training session and enable stronger conclusions to be drawn.

An Innovative Hybrid Loop-Pool SFR Design and Safety Analysis Methods: Today and Tomorrow

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hongbin Zhang; Haihua Zhao; Vincent Mousseau

2008-04-01

Investment in commercial sodium cooled fast reactor (SFR) power plants will become possible only if SFRs achieve economic competitiveness as compared to light water reactors and other Generation IV reactors. Toward that end, we have launched efforts to improve the economics and safety of SFRs from the thermal design and safety analyses perspectives at Idaho National Laboratory. From the thermal design perspective, an innovative hybrid loop-pool SFR design has been proposed. This design takes advantage of the inherent safety of a pool design and the compactness of a loop design to further improve economics and safety. From the safety analysesmore » perspective, we have initiated an effort to develop a high fidelity reactor system safety code.« less

A Smartphone-Based Driver Safety Monitoring System Using Data Fusion

PubMed Central

Lee, Boon-Giin; Chung, Wan-Young

2012-01-01

This paper proposes a method for monitoring driver safety levels using a data fusion approach based on several discrete data types: eye features, bio-signal variation, in-vehicle temperature, and vehicle speed. The driver safety monitoring system was developed in practice in the form of an application for an Android-based smartphone device, where measuring safety-related data requires no extra monetary expenditure or equipment. Moreover, the system provides high resolution and flexibility. The safety monitoring process involves the fusion of attributes gathered from different sensors, including video, electrocardiography, photoplethysmography, temperature, and a three-axis accelerometer, that are assigned as input variables to an inference analysis framework. A Fuzzy Bayesian framework is designed to indicate the driver’s capability level and is updated continuously in real-time. The sensory data are transmitted via Bluetooth communication to the smartphone device. A fake incoming call warning service alerts the driver if his or her safety level is suspiciously compromised. Realistic testing of the system demonstrates the practical benefits of multiple features and their fusion in providing a more authentic and effective driver safety monitoring. PMID:23247416

Safety design approach for external events in Japan sodium-cooled fast reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yamano, H.; Kubo, S.; Tani, A.

2012-07-01

This paper describes a safety design approach for external events in the design study of Japan sodium-cooled fast reactor. An emphasis is introduction of a design extension external condition (DEEC). In addition to seismic design, other external events such as tsunami, strong wind, abnormal temperature, etc. were addressed in this study. From a wide variety of external events consisting of natural hazards and human-induced ones, a screening method was developed in terms of siting, consequence, frequency to select representative events. Design approaches for these events were categorized on the probabilistic, statistical and deterministic basis. External hazard conditions were considered mainlymore » for DEECs. In the probabilistic approach, the DEECs of earthquake, tsunami and strong wind were defined as 1/10 of exceedance probability of the external design bases. The other representative DEECs were also defined based on statistical or deterministic approaches. (authors)« less

Design and implementation of an identification system in construction site safety for proactive accident prevention.

PubMed

Yang, Huanjia; Chew, David A S; Wu, Weiwei; Zhou, Zhipeng; Li, Qiming

2012-09-01

Identifying accident precursors using real-time identity information has great potential to improve safety performance in construction industry, which is still suffering from day to day records of accident fatality and injury. Based on the requirements analysis for identifying precursor and the discussion of enabling technology solutions for acquiring and sharing real-time automatic identification information on construction site, this paper proposes an identification system design for proactive accident prevention to improve construction site safety. Firstly, a case study is conducted to analyze the automatic identification requirements for identifying accident precursors in construction site. Results show that it mainly consists of three aspects, namely access control, training and inspection information and operation authority. The system is then designed to fulfill these requirements based on ZigBee enabled wireless sensor network (WSN), radio frequency identification (RFID) technology and an integrated ZigBee RFID sensor network structure. At the same time, an information database is also designed and implemented, which includes 15 tables, 54 queries and several reports and forms. In the end, a demonstration system based on the proposed system design is developed as a proof of concept prototype. The contributions of this study include the requirement analysis and technical design of a real-time identity information tracking solution for proactive accident prevention on construction sites. The technical solution proposed in this paper has a significant importance in improving safety performance on construction sites. Moreover, this study can serve as a reference design for future system integrations where more functions, such as environment monitoring and location tracking, can be added. Copyright © 2011 Elsevier Ltd. All rights reserved.

The design of the intelligent monitoring system for dam safety

NASA Astrophysics Data System (ADS)

Yuan, Chun-qiao; Jiang, Chen-guang; Wang, Guo-hui

2008-12-01

Being a vital manmade water-control structure, a dam plays a very important role in the living and production of human being. To make a dam run safely, the best design and the superior construction quality are paramount; moreover, with working periods increasing, various dynamic, alternative and bad loads generate little by little various distortions on the dam structure inevitably, which shall lead to potential safety problems or further a disaster (dam burst). There are many signs before the occurrence of a dam accident, so the timely and effective surveying on the distortion of a dam is important. On the basis of the cause supra, two intelligent (automatic) monitoring systems about the dam's safety based on the RTK-GPS technology and the measuring robot has been developed. The basic principle, monitoring method and monitoring process of these two intelligent (automatic) monitoring systems are introduced. It presents examples of monitor and puts forward the basic rule of dam warning based on data of actual monitor.

Manned space flight nuclear system safety. Volume 1: base nuclear system safety

NASA Technical Reports Server (NTRS)

1972-01-01

The mission and terrestrial nuclear safety aspects of future long duration manned space missions in low earth orbit are discussed. Nuclear hazards of a typical low earth orbit Space Base mission (from natural sources and on-board nuclear hardware) have been identified and evaluated. Some of the principal nuclear safety design and procedural considerations involved in launch, orbital, and end of mission operations are presented. Areas of investigation include radiation interactions with the crew, subsystems, facilities, experiments, film, interfacing vehicles, nuclear hardware and the terrestrial populace. Results of the analysis indicate: (1) the natural space environment can be the dominant radiation source in a low earth orbit where reactors are effectively shielded, (2) with implementation of safety guidelines the reactor can present a low risk to the crew, support personnel, the terrestrial populace, flight hardware and the mission, (3) ten year missions are feasible without exceeding integrated radiation limits assigned to flight hardware, and (4) crew stay-times up to one year are feasible without storm shelter provisions.

Lithium Ion Battery Design and Safety

NASA Technical Reports Server (NTRS)

Au, George; Locke, Laura

2001-01-01

This viewgraph presentation makes several recommendations to ensure the safe and effective design of Lithium ion cell batteries. Large lithium ion cells require pressure switches and small cells require pressure disconnects and other safety devices with the ability to instantly interrupt flow. Other suggestions include specifications for batteries and battery chargers.

Research on Early Warning of Chinese Food Safety Based on Social Physics

NASA Astrophysics Data System (ADS)

Ma, Yonghuan; Niu, Wenyuan; Li, Qianqian

Based on social physics, this paper designs the index system of food safety, builds early warning model of food safety, calculates the degree of food safety, and assesses the state of early warning of 2007 in China. The result shows the degree of food safety is near 0.7 in securer state, belonging to slight emergency. It is much lower in eastern areas of developed regions, belonging to insecure state in the mass. That the food safety is ensured in major grain producing areas, Inner Mongolia, Ningxia and Xinjiang is the prerequisite of realizing the food safety of China. The result also shows four significant indices, grain production capacity, grain circulation order, grain demand and grain supply, which are important indicatio to control food safety.

Sample size for post-marketing safety studies based on historical controls.

PubMed

Wu, Yu-te; Makuch, Robert W

2010-08-01

As part of a drug's entire life cycle, post-marketing studies are an important part in the identification of rare, serious adverse events. Recently, the US Food and Drug Administration (FDA) has begun to implement new post-marketing safety mandates as a consequence of increased emphasis on safety. The purpose of this research is to provide exact sample size formula for the proposed hybrid design, based on a two-group cohort study with incorporation of historical external data. Exact sample size formula based on the Poisson distribution is developed, because the detection of rare events is our outcome of interest. Performance of exact method is compared to its approximate large-sample theory counterpart. The proposed hybrid design requires a smaller sample size compared to the standard, two-group prospective study design. In addition, the exact method reduces the number of subjects required in the treatment group by up to 30% compared to the approximate method for the study scenarios examined. The proposed hybrid design satisfies the advantages and rationale of the two-group design with smaller sample sizes generally required. 2010 John Wiley & Sons, Ltd.

Designing with Traffic Safety in Mind.

ERIC Educational Resources Information Center

Matthews, John

1998-01-01

Provides an example of how one county public school system was able to minimize traffic accidents and increase safety around its schools. Illustrations are provided of safer bus loading zones, pedestrian walkways and sidewalks, staff parking, and acceptable methods for staging buses. A checklist for school driveway design concludes the article.…

Design and Testing of the Safety Agenda Mobile App for Managing Health Care Managers’ Patient Safety Responsibilities

PubMed Central

Carrillo, Irene; Fernandez, Cesar; Vicente, Maria Asuncion; Guilabert, Mercedes

2016-01-01

Background Adverse events are a reality in clinical practice. Reducing the prevalence of preventable adverse events by stemming their causes requires health managers’ engagement. Objective The objective of our study was to develop an app for mobile phones and tablets that would provide managers with an overview of their responsibilities in matters of patient safety and would help them manage interventions that are expected to be carried out throughout the year. Methods The Safety Agenda Mobile App (SAMA) was designed based on standardized regulations and reviews of studies about health managers’ roles in patient safety. A total of 7 managers used a beta version of SAMA for 2 months and then they assessed and proposed improvements in its design. Their experience permitted redesigning SAMA, improving functions and navigation. A total of 74 Spanish health managers tried out the revised version of SAMA. After 4 months, their assessment was requested in a voluntary and anonymous manner. Results SAMA is an iOS app that includes 37 predefined tasks that are the responsibility of health managers. Health managers can adapt these tasks to their schedule, add new ones, and share them with their team. SAMA menus are structured in 4 main areas: information, registry, task list, and settings. Of the 74 users who tested SAMA, 64 (86%) users provided a positive assessment of SAMA characteristics and utility. Over an 11-month period, 238 users downloaded SAMA. This mobile app has obtained the AppSaludable (HealthyApp) Quality Seal. Conclusions SAMA includes a set of activities that are expected to be carried out by health managers in matters of patient safety and contributes toward improving the awareness of their responsibilities in matters of safety. PMID:27932315

Physical design correlates of efficiency and safety in emergency departments: a qualitative examination.

PubMed

Pati, Debajyoti; Harvey, Thomas E; Pati, Sipra

2014-01-01

The objective of this study was to explore and identify physical design correlates of safety and efficiency in emergency department (ED) operations. This study adopted an exploratory, multimeasure approach to (1) examine the interactions between ED operations and physical design at 4 sites and (2) identify domains of physical design decision-making that potentially influence efficiency and safety. Multidisciplinary gaming and semistructured interviews were conducted with stakeholders at each site. Study data suggest that 16 domains of physical design decisions influence safety, efficiency, or both. These include (1) entrance and patient waiting, (2) traffic management, (3) subwaiting or internal waiting areas, (4) triage, (5) examination/treatment area configuration, (6) examination/treatment area centralization versus decentralization, (7) examination/treatment room standardization, (8) adequate space, (9) nurse work space, (10) physician work space, (11) adjacencies and access, (12) equipment room, (13) psych room, (14) staff de-stressing room, (15) hallway width, and (16) results waiting area. Safety and efficiency from a physical environment perspective in ED design are mutually reinforcing concepts--enhancing efficiency bears positive implications for safety. Furthermore, safety and security emerged as correlated concepts, with security issues bearing implications for safety, thereby suggesting important associations between safety, security, and efficiency.

BESAFE II: Accident safety analysis code for MFE reactor designs

NASA Astrophysics Data System (ADS)

Sevigny, Lawrence Michael

The viability of controlled thermonuclear fusion as an alternative energy source hinges on its desirability from an economic and an environmental and safety standpoint. It is the latter which is the focus of this thesis. For magnetic fusion energy (MFE) devices, the safety concerns equate to a design's behavior during a worst-case accident scenario which is the loss of coolant accident (LOCA). In this dissertation, we examine the behavior of MFE devices during a LOCA and how this behavior relates to the safety characteristics of the machine; in particular the acute, whole-body, early dose. In doing so, we have produced an accident safety code, BESAFE II, now available to the fusion reactor design community. The Appendix constitutes the User's Manual for BESAFE II. The theory behind early dose calculations including the mobilization of activation products is presented in Chapter 2. Since mobilization of activation products is a strong function of temperature, it becomes necessary to calculate the thermal response of a design during a LOCA in order to determine the fraction of the activation products which are mobilized and thus become the source for the dose. The code BESAFE II is designed to determine the temperature history of each region of a design and determine the resulting mobilization of activation products at each point in time during the LOCA. The BESAFE II methodology is discussed in Chapter 4, followed by demonstrations of its use for two reference design cases: a PCA-Li tokamak and a SiC-He tokamak. Of these two cases, it is shown that the SiC-He tokamak is a better design from an accident safety standpoint than the PCA-Li tokamak. It is also found that doses derived from temperature-dependent mobilization data are different than those predicted using set mobilization categories such as those that involve Piet fractions. This demonstrates the need for more experimental data on fusion materials. The possibility for future improvements and modifications

Children's choice: Color associations in children's safety sign design.

PubMed

Siu, Kin Wai Michael; Lam, Mei Seung; Wong, Yi Lin

2017-03-01

Color has been more identified as a key consideration in ergonomics. Color conveys messages and is an important element in safety signs, as it provides extra information to users. However, very limited recent research has focused on children and their color association in the context of safety signs. This study thus examined how children use colors in drawing different safety signs and how they associate colors with different concepts and objects that appear in safety signs. Drawing was used to extract children's use of color and the associations they made between signs and colors. The child participants were given 12 referents of different safety signs and were asked to design and draw the signs using different colored felt-tip pens. They were also asked to give reasons for their choices of colors. Significant associations were found between red and 'don't', orange and 'hands', and blue and 'water'. The child participants were only able to attribute the reasons for the use of yellow, green, blue and black through concrete identification and concrete association, and red through abstract association. The children's use of color quite differs from that shown in the ISO registered signs. There is a need to consider the use of colors carefully when designing signs specifically for children. Sign designers should take children's color associations in consideration and be aware if there are any misunderstandings. Copyright © 2016 Elsevier Ltd. All rights reserved.

Small Column Ion Exchange Design and Safety Strategy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huff, T.; Rios-Armstrong, M.; Edwards, R.

2011-02-07

Small Column Ion Exchange (SCIX) is a transformational technology originally developed by the Department of Energy (DOE) Environmental Management (EM-30) office and is now being deployed at the Savannah River Site (SRS) to significantly increase overall salt processing capacity and accelerate the Liquid Waste System life-cycle. The process combines strontium and actinide removal using Monosodium Titanate (MST), Rotary Microfiltration, and cesium removal using Crystalline Silicotitanate (CST, specifically UOP IONSIV{reg_sign}IE-911 ion exchanger) to create a low level waste stream to be disposed in grout and a high level waste stream to be vitrified. The process also includes preparation of the streamsmore » for disposal, e.g., grinding of the loaded CST material. These waste processing components are technically mature and flowsheet integration studies are being performed including glass formulations studies, application specific thermal modeling, and mixing studies. The deployment program includes design and fabrication of the Rotary Microfilter (RMF) assembly, ion-exchange columns (IXCs), and grinder module, utilizing an integrated system safety design approach. The design concept is to install the process inside an existing waste tank, Tank 41H. The process consists of a feed pump with a set of four RMFs, two IXCs, a media grinder, three Submersible Mixer Pumps (SMPs), and all supporting infrastructure including media receipt and preparation facilities. The design addresses MST mixing to achieve the required strontium and actinide removal and to prevent future retrieval problems. CST achieves very high cesium loadings (up to 1,100 curies per gallon (Ci/gal) bed volume). The design addresses the hazards associated with this material including heat management (in column and in-tank), as detailed in the thermal modeling. The CST must be size reduced for compatibility with downstream processes. The design addresses material transport into and out of the grinder

Assessing the 'system' in safe systems-based road designs: using cognitive work analysis to evaluate intersection designs.

PubMed

Cornelissen, M; Salmon, P M; Stanton, N A; McClure, R

2015-01-01

While a safe systems approach has long been acknowledged as the underlying philosophy of contemporary road safety strategies, systemic applications are sparse. This article argues that systems-based methods from the discipline of Ergonomics have a key role to play in road transport design and evaluation. To demonstrate, the Cognitive Work Analysis framework was used to evaluate two road designs - a traditional Melbourne intersection and a cut-through design for future intersections based on road safety safe systems principles. The results demonstrate that, although the cut-through intersection appears different in layout from the traditional intersection, system constraints are not markedly different. Furthermore, the analyses demonstrated that redistribution of constraints in the cut-through intersection resulted in emergent behaviour, which was not anticipated and could prove problematic. Further, based on the lack of understanding of emergent behaviour, similar design induced problems are apparent across both intersections. Specifically, incompatibilities between infrastructure, vehicles and different road users were not dealt with by the proposed design changes. The importance of applying systems methods in the design and evaluation of road transport systems is discussed. Copyright © 2013 Elsevier Ltd. All rights reserved.

A human factors engineering paradigm for patient safety: designing to support the performance of the healthcare professional

PubMed Central

Karsh, B‐T; Holden, R J; Alper, S J; Or, C K L

2006-01-01

The goal of improving patient safety has led to a number of paradigms for directing improvement efforts. The main paradigms to date have focused on reducing injuries, reducing errors, or improving evidence based practice. In this paper a human factors engineering paradigm is proposed that focuses on designing systems to improve the performance of healthcare professionals and to reduce hazards. Both goals are necessary, but neither is sufficient to improve safety. We suggest that the road to patient and employee safety runs through the healthcare professional who delivers care. To that end, several arguments are provided to show that designing healthcare delivery systems to support healthcare professional performance and hazard reduction should yield significant patient safety benefits. The concepts of human performance and hazard reduction are explained. PMID:17142611

Space engine safety system

NASA Technical Reports Server (NTRS)

Maul, William A.; Meyer, Claudia M.

1991-01-01

A rocket engine safety system was designed to initiate control procedures to minimize damage to the engine or vehicle or test stand in the event of an engine failure. The features and the implementation issues associated with rocket engine safety systems are discussed, as well as the specific concerns of safety systems applied to a space-based engine and long duration space missions. Examples of safety system features and architectures are given, based on recent safety monitoring investigations conducted for the Space Shuttle Main Engine and for future liquid rocket engines. Also, the general design and implementation process for rocket engine safety systems is presented.

Stochastic targeted (STAR) glycemic control: design, safety, and performance.

PubMed

Evans, Alicia; Le Compte, Aaron; Tan, Chia-Siong; Ward, Logan; Steel, James; Pretty, Christopher G; Penning, Sophie; Suhaimi, Fatanah; Shaw, Geoffrey M; Desaive, Thomas; Chase, J Geoffrey

2012-01-01

Tight glycemic control (TGC) has shown benefits but has been difficult to achieve consistently. STAR (Stochastic TARgeted) is a flexible, model-based TGC approach that directly accounts for intra- and interpatient variability with a stochastically derived maximum 5% risk of blood glucose (BG) below 72 mg/dl. This research assesses the safety, efficacy, and clinical burden of a STAR TGC controller modulating both insulin and nutrition inputs in virtual and clinical pilot trials. Clinically validated virtual trials using data from 370 patients in the SPRINT (Specialized Relative Insulin and Nutrition Titration) study were used to design the STAR protocol and test its safety, performance, and required clinical effort prior to clinical pilot trials. Insulin and nutrition interventions were given every 1-3 h as chosen by the nurse to allow them to manage workload. Interventions were designed to maximize the overlap of the model-predicted (5-95(th) percentile) range of BG outcomes with the 72-117 mg/dl band and thus provide a maximum 5% risk of BG <72 mg/dl. Interventions were calculated using clinically validated computer models of human metabolism and its variability in critical illness. Carbohydrate intake (all sources) was selected to maximize intake up to 100% of the American College of Chest Physicians/Society of Critical Care Medicine (ACCP/SCCM) goal (25 kg/kcal/h). Insulin doses were limited (8 U/h maximum), with limited increases based on current rate (0.5-2.0 U/h). Initial clinical pilot trials involved 3 patients covering ~450 h. Approval was granted by the Upper South A Regional Ethics Committee. Virtual trials indicate that STAR provides similar glycemic control performance to SPRINT with 2-3 h (maximum) measurement intervals. Time in the 72-126 mg/dl and 72-145 mg/dl bands was equivalent for all controllers, indicating that glycemic outcome differences between protocols were only shifted in this range. Safety from hypoglycemia was improved. Importantly

Design and Testing of BACRA, a Web-Based Tool for Middle Managers at Health Care Facilities to Lead the Search for Solutions to Patient Safety Incidents

PubMed Central

Mira, José Joaquín; Vicente, Maria Asuncion; Fernandez, Cesar; Guilabert, Mercedes; Ferrús, Lena; Zavala, Elena; Silvestre, Carmen; Pérez-Pérez, Pastora

2016-01-01

Background Lack of time, lack of familiarity with root cause analysis, or suspicion that the reporting may result in negative consequences hinder involvement in the analysis of safety incidents and the search for preventive actions that can improve patient safety. Objective The aim was develop a tool that enables hospitals and primary care professionals to immediately analyze the causes of incidents and to propose and implement measures intended to prevent their recurrence. Methods The design of the Web-based tool (BACRA) considered research on the barriers for reporting, review of incident analysis tools, and the experience of eight managers from the field of patient safety. BACRA’s design was improved in successive versions (BACRA v1.1 and BACRA v1.2) based on feedback from 86 middle managers. BACRA v1.1 was used by 13 frontline professionals to analyze incidents of safety; 59 professionals used BACRA v1.2 and assessed the respective usefulness and ease of use of both versions. Results BACRA contains seven tabs that guide the user through the process of analyzing a safety incident and proposing preventive actions for similar future incidents. BACRA does not identify the person completing each analysis since the password introduced to hide said analysis only is linked to the information concerning the incident and not to any personal data. The tool was used by 72 professionals from hospitals and primary care centers. BACRA v1.2 was assessed more favorably than BACRA v1.1, both in terms of its usefulness (z=2.2, P=.03) and its ease of use (z=3.0, P=.003). Conclusions BACRA helps to analyze incidents of safety and to propose preventive actions. BACRA guarantees anonymity of the analysis and reduces the reluctance of professionals to carry out this task. BACRA is useful and easy to use. PMID:27678308

Design and Testing of BACRA, a Web-Based Tool for Middle Managers at Health Care Facilities to Lead the Search for Solutions to Patient Safety Incidents.

PubMed

Carrillo, Irene; Mira, José Joaquín; Vicente, Maria Asuncion; Fernandez, Cesar; Guilabert, Mercedes; Ferrús, Lena; Zavala, Elena; Silvestre, Carmen; Pérez-Pérez, Pastora

2016-09-27

Lack of time, lack of familiarity with root cause analysis, or suspicion that the reporting may result in negative consequences hinder involvement in the analysis of safety incidents and the search for preventive actions that can improve patient safety. The aim was develop a tool that enables hospitals and primary care professionals to immediately analyze the causes of incidents and to propose and implement measures intended to prevent their recurrence. The design of the Web-based tool (BACRA) considered research on the barriers for reporting, review of incident analysis tools, and the experience of eight managers from the field of patient safety. BACRA's design was improved in successive versions (BACRA v1.1 and BACRA v1.2) based on feedback from 86 middle managers. BACRA v1.1 was used by 13 frontline professionals to analyze incidents of safety; 59 professionals used BACRA v1.2 and assessed the respective usefulness and ease of use of both versions. BACRA contains seven tabs that guide the user through the process of analyzing a safety incident and proposing preventive actions for similar future incidents. BACRA does not identify the person completing each analysis since the password introduced to hide said analysis only is linked to the information concerning the incident and not to any personal data. The tool was used by 72 professionals from hospitals and primary care centers. BACRA v1.2 was assessed more favorably than BACRA v1.1, both in terms of its usefulness (z=2.2, P=.03) and its ease of use (z=3.0, P=.003). BACRA helps to analyze incidents of safety and to propose preventive actions. BACRA guarantees anonymity of the analysis and reduces the reluctance of professionals to carry out this task. BACRA is useful and easy to use.

Lightweight design of automobile frame based on magnesium alloy

NASA Astrophysics Data System (ADS)

Lyu, R.; Jiang, X.; Minoru, O.; Ju, D. Y.

2018-06-01

The structural performance and lightweighting of car base frame design is a challenging task due to all the performance targets that must be satisfied. In this paper, three kinds of materials (iron, aluminum and magnesium alloy) replacement along with section design optimization strategy is proposed to develop a lightweight car frame structure to satisfy the tensile and safety while reducing weight. Two kinds of cross-sections are considered as the design variables. Using Ansys static structure, the design optimization problem is solved, comparing the results of each step, structure of the base flame is optimized for lightweight.

A trigger-based design for evaluating the safety of in utero antiretroviral exposure in uninfected children of human immunodeficiency virus-infected mothers.

PubMed

Williams, Paige L; Seage, George R; Van Dyke, Russell B; Siberry, George K; Griner, Raymond; Tassiopoulos, Katherine; Yildirim, Cenk; Read, Jennifer S; Huo, Yanling; Hazra, Rohan; Jacobson, Denise L; Mofenson, Lynne M; Rich, Kenneth

2012-05-01

The Pediatric HIV/AIDS Cohort Study's Surveillance Monitoring of ART Toxicities Study is a prospective cohort study conducted at 22 US sites between 2007 and 2011 that was designed to evaluate the safety of in utero antiretroviral drug exposure in children not infected with human immunodeficiency virus who were born to mothers who were infected. This ongoing study uses a "trigger-based" design; that is, initial assessments are conducted on all children, and only those meeting certain thresholds or "triggers" undergo more intensive evaluations to determine whether they have had an adverse event (AE). The authors present the estimated rates of AEs for each domain of interest in the Surveillance Monitoring of ART Toxicities Study. They also evaluated the efficiency of this trigger-based design for estimating AE rates and for testing associations between in utero exposures to antiretroviral drugs and AEs. The authors demonstrate that estimated AE rates from the trigger-based design are unbiased after correction for the sensitivity of the trigger for identifying AEs. Even without correcting for bias based on trigger sensitivity, the trigger approach is generally more efficient for estimating AE rates than is evaluating a random sample of the same size. Minor losses in efficiency when comparing AE rates between persons exposed and unexposed in utero to particular antiretroviral drugs or drug classes were observed under most scenarios.

Highway Safety Program Manual: Volume 12: Highway Design, Construction and Maintenance.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 12 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) focuses on highway design, construction and maintenance. The purpose and specific objectives of such a program are described. Federal authority in the area of highway safety and policies regarding…

Generalized railway tank car safety design optimization for hazardous materials transport: addressing the trade-off between transportation efficiency and safety.

PubMed

Saat, Mohd Rapik; Barkan, Christopher P L

2011-05-15

North America railways offer safe and generally the most economical means of long distance transport of hazardous materials. Nevertheless, in the event of a train accident releases of these materials can pose substantial risk to human health, property or the environment. The majority of railway shipments of hazardous materials are in tank cars. Improving the safety design of these cars to make them more robust in accidents generally increases their weight thereby reducing their capacity and consequent transportation efficiency. This paper presents a generalized tank car safety design optimization model that addresses this tradeoff. The optimization model enables evaluation of each element of tank car safety design, independently and in combination with one another. We present the optimization model by identifying a set of Pareto-optimal solutions for a baseline tank car design in a bicriteria decision problem. This model provides a quantitative framework for a rational decision-making process involving tank car safety design enhancements to reduce the risk of transporting hazardous materials. Copyright © 2011 Elsevier B.V. All rights reserved.

Designing the safety of healthcare. Participation of ergonomics to the design of cooperative systems in radiotherapy.

PubMed

Munoz, Maria Isabel; Bouldi, Nadia; Barcellini, Flore; Nascimento, Adelaide

2012-01-01

This communication deals with the involvement of ergonomists in a research-action design process of a software platform in radiotherapy. The goal of the design project is to enhance patient safety by designing a workflow software that supports cooperation between professionals producing treatment in radiotherapy. The general framework of our approach is the ergonomics management of a design process, which is based in activity analysis and grounded in participatory design. Two fields are concerned by the present action: a design environment which is a participatory design process that involves software designers, caregivers as future users and ergonomists; and a reference real work setting in radiotherapy. Observations, semi-structured interviews and participatory workshops allow the characterization of activity in radiotherapy dealing with uses of cooperative tools, sources of variability and non-ruled strategies to manage the variability of the situations. This production of knowledge about work searches to enhance the articulation between technocentric and anthropocentric approaches, and helps in clarifying design requirements. An issue of this research-action is to develop a framework to define the parameters of the workflow tool, and the conditions of its deployment.

Cycling transport safety quantification

NASA Astrophysics Data System (ADS)

Drbohlav, Jiri; Kocourek, Josef

2018-05-01

Dynamic interest in cycling transport brings the necessity to design safety cycling infrastructure. In las few years, couple of norms with safety elements have been designed and suggested for the cycling infrastructure. But these were not fully examined. The main parameter of suitable and fully functional transport infrastructure is the evaluation of its safety. Common evaluation of transport infrastructure safety is based on accident statistics. These statistics are suitable for motor vehicle transport but unsuitable for the cycling transport. Cycling infrastructure evaluation of safety is suitable for the traffic conflicts monitoring. The results of this method are fast, based on real traffic situations and can be applied on any traffic situations.

The demonstration of a theory-based approach to the design of localized patient safety interventions

PubMed Central

2013-01-01

Background There is evidence of unsafe care in healthcare systems globally. Interventions to implement recommended practice often have modest and variable effects. Ideally, selecting and adapting interventions according to local contexts should enhance effects. However, the means by which this can happen is seldom systematic, based on theory, or made transparent. This work aimed to demonstrate the applicability, feasibility, and acceptability of a theoretical domains framework implementation (TDFI) approach for co-designing patient safety interventions. Methods We worked with three hospitals to support the implementation of evidence-based guidance to reduce the risk of feeding into misplaced nasogastric feeding tubes. Our stepped process, informed by the TDF and key principles from implementation literature, entailed: involving stakeholders; identifying target behaviors; identifying local factors (barriers and levers) affecting behavior change using a TDF-based questionnaire; working with stakeholders to generate specific local strategies to address key barriers; and supporting stakeholders to implement strategies. Exit interviews and audit data collection were undertaken to assess the feasibility and acceptability of this approach. Results Following audit and discussion, implementation teams for each Trust identified the process of checking the positioning of nasogastric tubes prior to feeding as the key behavior to target. Questionnaire results indicated differences in key barriers between organizations. Focus groups generated innovative, generalizable, and adaptable strategies for overcoming barriers, such as awareness events, screensavers, equipment modifications, and interactive learning resources. Exit interviews identified themes relating to the benefits, challenges, and sustainability of this approach. Time trend audit data were collected for 301 patients over an 18-month period for one Trust, suggesting clinically significant improved use of pH and

Brazed Joints Design and Allowables: Discuss Margins of Safety in Critical Brazed Structures

NASA Technical Reports Server (NTRS)

FLom, Yury

2009-01-01

This slide presentation tutorial discusses margins of safety in critical brazed structures. It reviews: (1) the present situation (2) definition of strength (3) margins of safety (4) design allowables (5) mechanical testing (6) failure criteria (7) design flowchart (8) braze gap (9) residual stresses and (10) delayed failures. This presentation addresses the strength of the brazed joints, the methods of mechanical testing, and our ability to evaluate the margins of safety of the brazed joints as it applies to the design of critical and expensive brazed assemblies.

Design and development of food safety knowledge and attitude scales for consumer food safety education.

PubMed

Medeiros, Lydia C; Hillers, Virginia N; Chen, Gang; Bergmann, Verna; Kendall, Patricia; Schroeder, Mary

2004-11-01

The objective of this study was to design and develop food safety knowledge and attitude scales based on food-handling guidelines developed by a national panel of food safety experts. Knowledge (n=43) and attitude (n=49) questions were developed and pilot-tested with a variety of consumer groups. Final questions were selected based on item analysis and on validity and reliability statistical tests. Knowledge questions were tested in Washington State with participants in low-income nutrition education programs (pretest/posttest n=58, test/retest n=19) and college students (pretest/posttest n=34). Attitude questions were tested in Ohio with nutrition education program participants (n=30) and college students (non-nutrition majors n=138, nutrition majors n=57). Item analysis, paired sample t tests, Pearson's correlation coefficients, and Cronbach's alpha were used. Reliability and validity tests of individual items and the question sets were used to reduce the scales to 18 knowledge questions and 10 attitude questions. The knowledge and attitude scales covered topics ranked as important by a national panel of experts and met most validity and reliability standards. The 18-item knowledge questionnaire had instructional sensitivity (mean score increase of more than three points after instruction), internal reliability (Cronbach's alpha >.75), and produced similar results in test-retest without intervention (coefficient of stability=.81). Knowledge of correct procedures for hand washing and avoiding cross-contamination was widespread before instruction. Knowledge was limited regarding avoiding food preparation while ill, cooking hamburgers, high-risk foods, and whether cooked rice and potatoes could be stored at room temperature. The 10-item attitude scale had an appropriate range of responses (item difficulty) and produced similar results in test-retest ( P safety is

Does user-centred design affect the efficiency, usability and safety of CPOE order sets?

PubMed

Chan, Julie; Shojania, Kaveh G; Easty, Anthony C; Etchells, Edward E

2011-05-01

Application of user-centred design principles to Computerized provider order entry (CPOE) systems may improve task efficiency, usability or safety, but there is limited evaluative research of its impact on CPOE systems. We evaluated the task efficiency, usability, and safety of three order set formats: our hospital's planned CPOE order sets (CPOE Test), computer order sets based on user-centred design principles (User Centred Design), and existing pre-printed paper order sets (Paper). 27 staff physicians, residents and medical students. Sunnybrook Health Sciences Centre, an academic hospital in Toronto, Canada. Methods Participants completed four simulated order set tasks with three order set formats (two CPOE Test tasks, one User Centred Design, and one Paper). Order of presentation of order set formats and tasks was randomized. Users received individual training for the CPOE Test format only. Completion time (efficiency), requests for assistance (usability), and errors in the submitted orders (safety). 27 study participants completed 108 order sets. Mean task times were: User Centred Design format 273 s, Paper format 293 s (p=0.73 compared to UCD format), and CPOE Test format 637 s (p<0.0001 compared to UCD format). Users requested assistance in 31% of the CPOE Test format tasks, whereas no assistance was needed for the other formats (p<0.01). There were no significant differences in number of errors between formats. The User Centred Design format was more efficient and usable than the CPOE Test format even though training was provided for the latter. We conclude that application of user-centred design principles can enhance task efficiency and usability, increasing the likelihood of successful implementation.

Safety sign designs for children by considering effect of the colors preferences: A case study

NASA Astrophysics Data System (ADS)

Iftadi, Irwan; Nugraha, Dian Cahya; Jauhari, Wakhid Ahmad

2018-02-01

Color has become a major consideration in ergonomics. Color conveys a message and it is an important element in safety signs. The importance of colors usage in safety sign designs makes the colors research into one of the things that must be done before designing them. So far, research in the related field only focused on the adult's perspective without involving children's perspective in designing the safety signs. This paper aims to find out how children's perception towards colors affects the safety sign designs. This study consist of eight sections which are literature study, direct observation, determining referents and other parameters, determining research respondents, making the booklet, assessing the colors preferences, determining the design's parameter value and creating the safety sign designs. Limitation of the research are the objects are the students with the age of 10 - 11 years old in Grade IV and then the research is conducted in the school day and hours that apply to the school. Chi square test and odds ratio are employed to assess the colors preferences. Twelve safety sign designs are proposed by considering the children's colors perception. The designs are grouped into three types of sign which are Mandatory Action Sign, Warning Sign and Prohibition Sign. Six colors are used to draw the safety signs i.e. red, orange, yellow, green, blue and black. On the basis of the study, it is concluded that the colors that often appears in safety signs is green with the percentage of 75% and that rarely appears is red with the percentage of 8.33%.

Study design and analysis of automobile bumper for pedestrian safety

NASA Astrophysics Data System (ADS)

Kulkarni, Akash; Vora, Rushabh; Ravi, K.

2017-11-01

This paper aims to design and analyse the bumper beam structure, in order to ensure the protection of the pedestrians along with the occupants inside the vehicle. The concern shown towards the pedestrian safety is because, each year about 2,70,000 pedestrians are killed in road accidents that accounts to 22% of the total deaths. From the literature review, it was inferred that the mounting position of bumper and material selection play a crucial role in maximising the pedestrian safety. Hence in this paper, the effects of bumper mounting position and the bumper beam material have been studied, with reference to an explicit dynamic collision involving with a dummy human lower leg set-up. The acceptance of a particular mounting position/material was based on the fact that the maximum stress and deformation induced were less than the yield limits of the human leg form structure (representing the skin, femur and tibia).

Interface design of VSOP'94 computer code for safety analysis

NASA Astrophysics Data System (ADS)

Natsir, Khairina; Yazid, Putranto Ilham; Andiwijayakusuma, D.; Wahanani, Nursinta Adi

2014-09-01

Today, most software applications, also in the nuclear field, come with a graphical user interface. VSOP'94 (Very Superior Old Program), was designed to simplify the process of performing reactor simulation. VSOP is a integrated code system to simulate the life history of a nuclear reactor that is devoted in education and research. One advantage of VSOP program is its ability to calculate the neutron spectrum estimation, fuel cycle, 2-D diffusion, resonance integral, estimation of reactors fuel costs, and integrated thermal hydraulics. VSOP also can be used to comparative studies and simulation of reactor safety. However, existing VSOP is a conventional program, which was developed using Fortran 65 and have several problems in using it, for example, it is only operated on Dec Alpha mainframe platforms and provide text-based output, difficult to use, especially in data preparation and interpretation of results. We develop a GUI-VSOP, which is an interface program to facilitate the preparation of data, run the VSOP code and read the results in a more user friendly way and useable on the Personal 'Computer (PC). Modifications include the development of interfaces on preprocessing, processing and postprocessing. GUI-based interface for preprocessing aims to provide a convenience way in preparing data. Processing interface is intended to provide convenience in configuring input files and libraries and do compiling VSOP code. Postprocessing interface designed to visualized the VSOP output in table and graphic forms. GUI-VSOP expected to be useful to simplify and speed up the process and analysis of safety aspects.

Safety assessment in plant layout design using indexing approach: implementing inherent safety perspective. Part 2-Domino Hazard Index and case study.

PubMed

Tugnoli, Alessandro; Khan, Faisal; Amyotte, Paul; Cozzani, Valerio

2008-12-15

The design of layout plans requires adequate assessment tools for the quantification of safety performance. The general focus of the present work is to introduce an inherent safety perspective at different points of the layout design process. In particular, index approaches for safety assessment and decision-making in the early stages of layout design are developed and discussed in this two-part contribution. Part 1 (accompanying paper) of the current work presents an integrated index approach for safety assessment of early plant layout. In the present paper (Part 2), an index for evaluation of the hazard related to the potential of domino effects is developed. The index considers the actual consequences of possible escalation scenarios and scores or ranks the subsequent accident propagation potential. The effects of inherent and passive protection measures are also assessed. The result is a rapid quantification of domino hazard potential that can provide substantial support for choices in the early stages of layout design. Additionally, a case study concerning selection among various layout options is presented and analyzed. The case study demonstrates the use and applicability of the indices developed in both parts of the current work and highlights the value of introducing inherent safety features early in layout design.

Conceptual design study of Fusion Experimental Reactor (FY86 FER): Safety

NASA Astrophysics Data System (ADS)

Seki, Yasushi; Iida, Hiromasa; Honda, Tsutomu

1987-08-01

This report describes the study on safety for FER (Fusion Experimental Reactor) which has been designed as a next step machine to the JT-60. Though the final purpose of this study is to have an image of design base accident, maximum credible accident and to assess their risk or probability, etc., as FER plant system, the emphasis of this years study is placed on fuel-gas circulation system where the tritium inventory is maximum. The report consists of two chapters. The first chapter summarizes the FER system and describes FMEA (Failure Mode and Effect Analysis) and related accident progression sequence for FER plant system as a whole. The second chapter of this report is focused on fuel-gas circulation system including purification, isotope separation and storage. Probability of risk is assessed by the probabilistic risk analysis (PRA) procedure based on FMEA, ETA and FTA.

Integrated deterministic and probabilistic safety analysis for safety assessment of nuclear power plants

DOE PAGES

Di Maio, Francesco; Zio, Enrico; Smith, Curtis; ...

2015-07-06

The present special issue contains an overview of the research in the field of Integrated Deterministic and Probabilistic Safety Assessment (IDPSA) of Nuclear Power Plants (NPPs). Traditionally, safety regulation for NPPs design and operation has been based on Deterministic Safety Assessment (DSA) methods to verify criteria that assure plant safety in a number of postulated Design Basis Accident (DBA) scenarios. Referring to such criteria, it is also possible to identify those plant Structures, Systems, and Components (SSCs) and activities that are most important for safety within those postulated scenarios. Then, the design, operation, and maintenance of these “safety-related” SSCs andmore » activities are controlled through regulatory requirements and supported by Probabilistic Safety Assessment (PSA).« less

A Trigger-based Design for Evaluating the Safety of In Utero Antiretroviral Exposure in Uninfected Children of Human Immunodeficiency Virus-Infected Mothers

PubMed Central

Williams, Paige L.; Seage, George R.; Van Dyke, Russell B.; Siberry, George K.; Griner, Raymond; Tassiopoulos, Katherine; Yildirim, Cenk; Read, Jennifer S.; Huo, Yanling; Hazra, Rohan; Jacobson, Denise L.; Mofenson, Lynne M.; Rich, Kenneth

2012-01-01

The Pediatric HIV/AIDS Cohort Study’s Surveillance Monitoring of ART Toxicities Study is a prospective cohort study conducted at 22 US sites between 2007 and 2011 that was designed to evaluate the safety of in utero antiretroviral drug exposure in children not infected with human immunodeficiency virus who were born to mothers who were infected. This ongoing study uses a “trigger-based” design; that is, initial assessments are conducted on all children, and only those meeting certain thresholds or “triggers” undergo more intensive evaluations to determine whether they have had an adverse event (AE). The authors present the estimated rates of AEs for each domain of interest in the Surveillance Monitoring of ART Toxicities Study. They also evaluated the efficiency of this trigger-based design for estimating AE rates and for testing associations between in utero exposures to antiretroviral drugs and AEs. The authors demonstrate that estimated AE rates from the trigger-based design are unbiased after correction for the sensitivity of the trigger for identifying AEs. Even without correcting for bias based on trigger sensitivity, the trigger approach is generally more efficient for estimating AE rates than is evaluating a random sample of the same size. Minor losses in efficiency when comparing AE rates between persons exposed and unexposed in utero to particular antiretroviral drugs or drug classes were observed under most scenarios. PMID:22491086

Roadway safety design workbook.

DOT National Transportation Integrated Search

2009-07-01

Highway safety is an ongoing concern to the Texas Department of Transportation (TxDOT). As part of its : proactive commitment to improving highway safety, TxDOT is moving toward including quantitative safety : analyses earlier in the project developm...

Highway safety design workshops.

DOT National Transportation Integrated Search

2010-11-01

Highway safety is an ongoing concern for the Texas Department of Transportation (TxDOT). As part of its : proactive commitment to improving highway safety, TxDOT is moving toward including quantitative safety : analyses earlier in the project develop...

14 CFR 415.127 - Flight safety system design and operation data.

Code of Federal Regulations, 2013 CFR

2013-01-01

... system and subsystems design and operational requirements. (c) Flight safety system diagram. An applicant... subsystems. The diagram must include the following subsystems defined in part 417, subpart D of this chapter... data processing, display, and recording system; and flight safety official console. (d) Subsystem...

14 CFR 415.127 - Flight safety system design and operation data.

Code of Federal Regulations, 2011 CFR

2011-01-01

... system and subsystems design and operational requirements. (c) Flight safety system diagram. An applicant... subsystems. The diagram must include the following subsystems defined in part 417, subpart D of this chapter... data processing, display, and recording system; and flight safety official console. (d) Subsystem...

14 CFR 415.127 - Flight safety system design and operation data.

Code of Federal Regulations, 2012 CFR

2012-01-01

... system and subsystems design and operational requirements. (c) Flight safety system diagram. An applicant... subsystems. The diagram must include the following subsystems defined in part 417, subpart D of this chapter... data processing, display, and recording system; and flight safety official console. (d) Subsystem...

14 CFR 415.127 - Flight safety system design and operation data.

Code of Federal Regulations, 2014 CFR

2014-01-01

... system and subsystems design and operational requirements. (c) Flight safety system diagram. An applicant... subsystems. The diagram must include the following subsystems defined in part 417, subpart D of this chapter... data processing, display, and recording system; and flight safety official console. (d) Subsystem...

14 CFR 415.127 - Flight safety system design and operation data.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Expendable Launch Vehicle From a Non-Federal Launch Site § 415.127 Flight safety system design and operation...: flight termination system; command control system; tracking; telemetry; communications; flight safety... control system. (7) Flight termination system component storage, operating, and service life. A listing of...

Evaluating the Performance of the NASA LaRC CMF Motion Base Safety Devices

NASA Technical Reports Server (NTRS)

Gupton, Lawrence E.; Bryant, Richard B., Jr.; Carrelli, David J.

2006-01-01

This paper describes the initial measured performance results of the previously documented NASA Langley Research Center (LaRC) Cockpit Motion Facility (CMF) motion base hardware safety devices. These safety systems are required to prevent excessive accelerations that could injure personnel and damage simulator cockpits or the motion base structure. Excessive accelerations may be caused by erroneous commands or hardware failures driving an actuator to the end of its travel at high velocity, stepping a servo valve, or instantly reversing servo direction. Such commands may result from single order failures of electrical or hydraulic components within the control system itself, or from aggressive or improper cueing commands from the host simulation computer. The safety systems must mitigate these high acceleration events while minimizing the negative performance impacts. The system accomplishes this by controlling the rate of change of valve signals to limit excessive commanded accelerations. It also aids hydraulic cushion performance by limiting valve command authority as the actuator approaches its end of travel. The design takes advantage of inherent motion base hydraulic characteristics to implement all safety features using hardware only solutions.

Time pressure in scenario-based online construction safety quizzes and its effect on students' performance

NASA Astrophysics Data System (ADS)

Jaeger, Martin; Adair, Desmond

2017-05-01

Online quizzes have been shown to be effective learning and assessment approaches. However, if scenario-based online construction safety quizzes do not include time pressure similar to real-world situations, they reflect situations too ideally. The purpose of this paper is to compare engineering students' performance when carrying out an online construction safety quiz with time pressure versus an online construction safety quiz without time pressure. Two versions of an online construction safety quiz are developed and administered to randomly assigned engineering students based on a quasi-experimental post-test design. The findings contribute to scenario-based learning and assessment of construction safety in four ways. First, the results confirm earlier findings that 'intrinsic stress' does not seem to impair students' performance. Second, students who carry out the online construction safety quiz with time pressure are less likely to 'learn by trial and error'. Third, students exposed to time pressure appreciate that they become better prepared for real life. Finally, preparing students to work under time pressure is an important industry requirement. The results of this study should encourage engineering educators to explore and implement ways to include time pressure in scenario-based online quizzes and learning.

Does user-centred design affect the efficiency, usability and safety of CPOE order sets?

PubMed Central

Chan, Julie; Shojania, Kaveh G; Easty, Anthony C

2011-01-01

Background Application of user-centred design principles to Computerized provider order entry (CPOE) systems may improve task efficiency, usability or safety, but there is limited evaluative research of its impact on CPOE systems. Objective We evaluated the task efficiency, usability, and safety of three order set formats: our hospital's planned CPOE order sets (CPOE Test), computer order sets based on user-centred design principles (User Centred Design), and existing pre-printed paper order sets (Paper). Participants 27staff physicians, residents and medical students. Setting Sunnybrook Health Sciences Centre, an academic hospital in Toronto, Canada. Methods Participants completed four simulated order set tasks with three order set formats (two CPOE Test tasks, one User Centred Design, and one Paper). Order of presentation of order set formats and tasks was randomized. Users received individual training for the CPOE Test format only. Main Measures Completion time (efficiency), requests for assistance (usability), and errors in the submitted orders (safety). Results 27 study participants completed 108 order sets. Mean task times were: User Centred Design format 273 s, Paper format 293 s (p=0.73 compared to UCD format), and CPOE Test format 637 s (p<0.0001 compared to UCD format). Users requested assistance in 31% of the CPOE Test format tasks, whereas no assistance was needed for the other formats (p<0.01). There were no significant differences in number of errors between formats. Conclusions The User Centred Design format was more efficient and usable than the CPOE Test format even though training was provided for the latter. We conclude that application of user-centred design principles can enhance task efficiency and usability, increasing the likelihood of successful implementation. PMID:21486886

48 CFR 50.205-3 - Authorization of offers contingent upon SAFETY Act designation or certification before contract...

Code of Federal Regulations, 2011 CFR

2011-10-01

...— (i) For offers contingent upon SAFETY Act designation, a pre-qualification designation notice or a block designation; or (ii) For offers contingent upon SAFETY Act certification, a block certification... contingent upon SAFETY Act designation or certification before contract award. 50.205-3 Section 50.205-3...

Sources of Safety Data and Statistical Strategies for Design and Analysis: Clinical Trials.

PubMed

Zink, Richard C; Marchenko, Olga; Sanchez-Kam, Matilde; Ma, Haijun; Jiang, Qi

2018-03-01

There has been an increased emphasis on the proactive and comprehensive evaluation of safety endpoints to ensure patient well-being throughout the medical product life cycle. In fact, depending on the severity of the underlying disease, it is important to plan for a comprehensive safety evaluation at the start of any development program. Statisticians should be intimately involved in this process and contribute their expertise to study design, safety data collection, analysis, reporting (including data visualization), and interpretation. In this manuscript, we review the challenges associated with the analysis of safety endpoints and describe the safety data that are available to influence the design and analysis of premarket clinical trials. We share our recommendations for the statistical and graphical methodologies necessary to appropriately analyze, report, and interpret safety outcomes, and we discuss the advantages and disadvantages of safety data obtained from clinical trials compared to other sources. Clinical trials are an important source of safety data that contribute to the totality of safety information available to generate evidence for regulators, sponsors, payers, physicians, and patients. This work is a result of the efforts of the American Statistical Association Biopharmaceutical Section Safety Working Group.

Safety approach to the selection of design criteria for the CRBRP reactor refueling system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meisl, C J; Berg, G E; Sharkey, N F

1979-01-01

The selection of safety design criteria for Liquid Metal Fast Breeder Reactor (LMFBR) refueling systems required the extrapolation of regulations and guidelines intended for Light Water Reactor refueling systems and was encumbered by the lack of benefit from a commercially licensed predecessor other than Fermi. The overall approach and underlying logic are described for developing safety design criteria for the reactor refueling system (RRS) of the Clinch River Breeder Reactor Plant (CRBRP). The complete selection process used to establish the criteria is presented, from the definition of safety functions to the finalization of safety design criteria in the appropriate documents.more » The process steps are illustrated by examples.« less

Statistical issues in the design, conduct and analysis of two large safety studies.

PubMed

Gaffney, Michael

2016-10-01

The emergence, post approval, of serious medical events, which may be associated with the use of a particular drug or class of drugs, is an important public health and regulatory issue. The best method to address this issue is through a large, rigorously designed safety study. Therefore, it is important to elucidate the statistical issues involved in these large safety studies. Two such studies are PRECISION and EAGLES. PRECISION is the primary focus of this article. PRECISION is a non-inferiority design with a clinically relevant non-inferiority margin. Statistical issues in the design, conduct and analysis of PRECISION are discussed. Quantitative and clinical aspects of the selection of the composite primary endpoint, the determination and role of the non-inferiority margin in a large safety study and the intent-to-treat and modified intent-to-treat analyses in a non-inferiority safety study are shown. Protocol changes that were necessary during the conduct of PRECISION are discussed from a statistical perspective. Issues regarding the complex analysis and interpretation of the results of PRECISION are outlined. EAGLES is presented as a large, rigorously designed safety study when a non-inferiority margin was not able to be determined by a strong clinical/scientific method. In general, when a non-inferiority margin is not able to be determined, the width of the 95% confidence interval is a way to size the study and to assess the cost-benefit of relative trial size. A non-inferiority margin, when able to be determined by a strong scientific method, should be included in a large safety study. Although these studies could not be called "pragmatic," they are examples of best real-world designs to address safety and regulatory concerns. © The Author(s) 2016.

29 CFR 1960.6 - Designation of agency safety and health officials.

Code of Federal Regulations, 2011 CFR

2011-07-01

... responsibility to represent effectively the interest and support of the agency head in the management and... Order 12196, and this part; (2) An organization, including provision for the designation of safety and... safety and health program at all operational levels; (3) A set of procedures that ensures effective...

Is Model-Based Development a Favorable Approach for Complex and Safety-Critical Computer Systems on Commercial Aircraft?

NASA Technical Reports Server (NTRS)

Torres-Pomales, Wilfredo

2014-01-01

A system is safety-critical if its failure can endanger human life or cause significant damage to property or the environment. State-of-the-art computer systems on commercial aircraft are highly complex, software-intensive, functionally integrated, and network-centric systems of systems. Ensuring that such systems are safe and comply with existing safety regulations is costly and time-consuming as the level of rigor in the development process, especially the validation and verification activities, is determined by considerations of system complexity and safety criticality. A significant degree of care and deep insight into the operational principles of these systems is required to ensure adequate coverage of all design implications relevant to system safety. Model-based development methodologies, methods, tools, and techniques facilitate collaboration and enable the use of common design artifacts among groups dealing with different aspects of the development of a system. This paper examines the application of model-based development to complex and safety-critical aircraft computer systems. Benefits and detriments are identified and an overall assessment of the approach is given.

Creating the Web-based Intensive Care Unit Safety Reporting System

PubMed Central

Holzmueller, Christine G.; Pronovost, Peter J.; Dickman, Fern; Thompson, David A.; Wu, Albert W.; Lubomski, Lisa H.; Fahey, Maureen; Steinwachs, Donald M.; Engineer, Lilly; Jaffrey, Ali; Morlock, Laura L.; Dorman, Todd

2005-01-01

In an effort to improve patient safety, researchers at the Johns Hopkins University designed and implemented a comprehensive Web-based Intensive Care Unit Safety Reporting System (ICUSRS). The ICUSRS collects data about adverse events and near misses from all staff in the ICU. This report reflects data on 854 reports from 18 diverse ICUs across the United States. Reporting is voluntary, and data collected is confidential, with patient, provider, and reporter information deidentified. Preliminary data include system factors reported, degree of patient harm, reporting times, and evaluations of the system. Qualitative and quantitative data are reported back to the ICU site study teams and frontline staff through monthly reports, case discussions, and a quarterly newsletter. PMID:15561794

Designing for the Elderly User: Internet Safety Training

ERIC Educational Resources Information Center

Appelt, Lianne C.

2016-01-01

The following qualitative study examines the usability of a custom-designed Internet safety tutorial, targeted at elderly individuals who use the Internet regularly, for effectively conveying critical information regarding online fraud, scams, and other cyber security. The elderly population is especially at risk when it comes to fraudulent…

Creating a Culture of Patient Safety through Innovative Hospital Design

DTIC Science & Technology

2005-05-01

and families in the design process The IOM recommends working together with patients to customize health care systems, to ensure patient needs and...lab, drawing what we could about patient safety from available literature; inviting experts from the health care profession and other fields...safety of patient care, St. Joseph administrators believed that there was an opportunity to learn collectively from leaders in health care and other

Overview of Threats and Failure Models for Safety-Relevant Computer-Based Systems

NASA Technical Reports Server (NTRS)

Torres-Pomales, Wilfredo

2015-01-01

This document presents a high-level overview of the threats to safety-relevant computer-based systems, including (1) a description of the introduction and activation of physical and logical faults; (2) the propagation of their effects; and (3) function-level and component-level error and failure mode models. These models can be used in the definition of fault hypotheses (i.e., assumptions) for threat-risk mitigation strategies. This document is a contribution to a guide currently under development that is intended to provide a general technical foundation for designers and evaluators of safety-relevant systems.

Software Safety Risk in Legacy Safety-Critical Computer Systems

NASA Technical Reports Server (NTRS)

Hill, Janice; Baggs, Rhoda

2007-01-01

Safety-critical computer systems must be engineered to meet system and software safety requirements. For legacy safety-critical computer systems, software safety requirements may not have been formally specified during development. When process-oriented software safety requirements are levied on a legacy system after the fact, where software development artifacts don't exist or are incomplete, the question becomes 'how can this be done?' The risks associated with only meeting certain software safety requirements in a legacy safety-critical computer system must be addressed should such systems be selected as candidates for reuse. This paper proposes a method for ascertaining formally, a software safety risk assessment, that provides measurements for software safety for legacy systems which may or may not have a suite of software engineering documentation that is now normally required. It relies upon the NASA Software Safety Standard, risk assessment methods based upon the Taxonomy-Based Questionnaire, and the application of reverse engineering CASE tools to produce original design documents for legacy systems.

The business case for building better hospitals through evidence-based design.

PubMed

Sadler, Blair L; DuBose, Jennifer; Zimring, Craig

2008-01-01

After establishing the connection between building well-designed evidence-based facilities and improved safety and quality for patients, families, and staff, this article presents the compelling business case for doing so. It demonstrates why ongoing operating savings and initial capital costs must be analyzed and describes specific steps to ensure that design innovations are implemented effectively. Hospital leaders and boards are now beginning to face a new reality: They can no longer tolerate preventable hospital-acquired conditions such as infections, falls, and injuries to staff or unnecessary intra-hospital patient transfers that can increase errors. Nor can they subject patients and families to noisy, confusing environments that increase anxiety and stress. They must effectively deploy all reasonable quality improvement techniques available. To be optimally effective, a variety of tactics must be combined and implemented in an integrated way. Hospital leadership must understand the clear connection between building well-designed healing environments and improved healthcare safety and quality for patients, families, and staff, as well as the compelling business case for doing so. Emerging pay-for-performance (P4P) methodologies that reward hospitals for quality and refuse to pay hospitals for the harm they cause (e.g., infections and falls) further strengthen this business case. When planning to build a new hospital or to renovate an existing facility, healthcare leaders should address a key question: Will the proposed project incorporate all relevant and proven evidence-based design innovations to optimize patient safety, quality, and satisfaction as well as workforce safety, satisfaction, productivity, and energy efficiency? When conducting a business case analysis for a new project, hospital leaders should consider ongoing operating savings and the market share impact of evidence-based design interventions as well as initial capital costs. They should

Interchange Safety Analysis Tool (ISAT) : user manual

DOT National Transportation Integrated Search

2007-06-01

This User Manual describes the usage and operation of the spreadsheet-based Interchange Safety Analysis Tool (ISAT). ISAT provides design and safety engineers with an automated tool for assessing the safety effects of geometric design and traffic con...

Safety models incorporating graph theory based transit indicators.

PubMed

Quintero, Liliana; Sayed, Tarek; Wahba, Mohamed M

2013-01-01

There is a considerable need for tools to enable the evaluation of the safety of transit networks at the planning stage. One interesting approach for the planning of public transportation systems is the study of networks. Network techniques involve the analysis of systems by viewing them as a graph composed of a set of vertices (nodes) and edges (links). Once the transport system is visualized as a graph, various network properties can be evaluated based on the relationships between the network elements. Several indicators can be calculated including connectivity, coverage, directness and complexity, among others. The main objective of this study is to investigate the relationship between network-based transit indicators and safety. The study develops macro-level collision prediction models that explicitly incorporate transit physical and operational elements and transit network indicators as explanatory variables. Several macro-level (zonal) collision prediction models were developed using a generalized linear regression technique, assuming a negative binomial error structure. The models were grouped into four main themes: transit infrastructure, transit network topology, transit route design, and transit performance and operations. The safety models showed that collisions were significantly associated with transit network properties such as: connectivity, coverage, overlapping degree and the Local Index of Transit Availability. As well, the models showed a significant relationship between collisions and some transit physical and operational attributes such as the number of routes, frequency of routes, bus density, length of bus and 3+ priority lanes. Copyright © 2012 Elsevier Ltd. All rights reserved.

Medication safety research by observational study design.

PubMed

Lao, Kim S J; Chui, Celine S L; Man, Kenneth K C; Lau, Wallis C Y; Chan, Esther W; Wong, Ian C K

2016-06-01

Observational studies have been recognised to be essential for investigating the safety profile of medications. Numerous observational studies have been conducted on the platform of large population databases, which provide adequate sample size and follow-up length to detect infrequent and/or delayed clinical outcomes. Cohort and case-control are well-accepted traditional methodologies for hypothesis testing, while within-individual study designs are developing and evolving, addressing previous known methodological limitations to reduce confounding and bias. Respective examples of observational studies of different study designs using medical databases are shown. Methodology characteristics, study assumptions, strengths and weaknesses of each method are discussed in this review.

A scan statistic for identifying optimal risk windows in vaccine safety studies using self-controlled case series design.

PubMed

Xu, Stanley; Hambidge, Simon J; McClure, David L; Daley, Matthew F; Glanz, Jason M

2013-08-30

In the examination of the association between vaccines and rare adverse events after vaccination in postlicensure observational studies, it is challenging to define appropriate risk windows because prelicensure RCTs provide little insight on the timing of specific adverse events. Past vaccine safety studies have often used prespecified risk windows based on prior publications, biological understanding of the vaccine, and expert opinion. Recently, a data-driven approach was developed to identify appropriate risk windows for vaccine safety studies that use the self-controlled case series design. This approach employs both the maximum incidence rate ratio and the linear relation between the estimated incidence rate ratio and the inverse of average person time at risk, given a specified risk window. In this paper, we present a scan statistic that can identify appropriate risk windows in vaccine safety studies using the self-controlled case series design while taking into account the dependence of time intervals within an individual and while adjusting for time-varying covariates such as age and seasonality. This approach uses the maximum likelihood ratio test based on fixed-effects models, which has been used for analyzing data from self-controlled case series design in addition to conditional Poisson models. Copyright © 2013 John Wiley & Sons, Ltd.

Behavior-Based Safety and Occupational Risk Management

ERIC Educational Resources Information Center

Geller, E. Scott

2005-01-01

The behavior-based approach to managing occupational risk and preventing workplace injuries is reviewed. Unlike the typical top-down control approach to industrial safety, behavior-based safety (BBS) provides tools and procedures workers can use to take personal control of occupational risks. Strategies the author and his colleagues have been…

[Design of a plan for patient safety in pediatric surgery service].

PubMed

Paredes Esteban, R M; Castillo Fernández, A L; Miñarro del Moral, R; Garrido Pérez, J I; Granero Cendón, R; Gómez Beltrán, O; Berenguer Garcia, M J; Tejedor Fernández, M

2014-10-01

Patient safety is a key priority in quality management for healthcare services providers. Every patient is entitled to receive safe and effective healthcare. The aim of this study was to design a patient safety plan for a Paediatric Surgery Department. We carried out a literature review and we established a work group that included healthcare professionals from the Paediatric Surgery Department and the Quality and Medical Records Department. The group identified potential adverse events, failures and causes and established a rating using Failure Mode Effects Analysis. Potential risks were mapped out and a plan was designed establishing actions to reduce risks. We designated leaders to ensure the effective implementation of the plan. A total of 58 adverse events were identified in the Paediatric Surgery Department. We detected 128 failures that were produced by 211 different causes. The group developed a proposal with 424 specific measures to carry out preventive and/or remedial actions that were then narrowed down to 322. The group designed a plan to apply the programme, which is currently being implemented. The methodology used enabled obtaining key information for improvement of patient safety and developing preventive and/or remedial actions. These measures are applicable in practice, as they were designed using proposals and agreements with professionals that take active part in the care of children with surgical conditions.

Reliability based design of the primary structure of oil tankers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Casella, G.; Dogliani, M.; Guedes Soares, C.

1996-12-31

The present paper describes the reliability analysis carried out for two oil tanker-ships having comparable dimensions but different design. The scope of the analysis was to derive indications on the value of the reliability index obtained for existing, typical and well designed oil tankers, as well as to apply the tentative rule checking formulation developed within the CEC-funded SHIPREL Project. The checking formula was adopted to redesign the midships section of one of the considered ships, upgrading her in order to meet the target failure probability considered in the rule development process. The resulting structure, in view of an upgradingmore » of the steel grade in the central part of the deck, lead to a convenient reliability level. The results of the analysis clearly showed that a large scatter exists presently in the design safety levels of ships, even when the Classification Societies` unified requirements are satisfied. A reliability based approach for the calibration of the rules for the global strength of ships is therefore proposed, in order to assist designers and Classification Societies in the process of producing ships which are more optimized, with respect to ensured safety levels. Based on the work reported in the paper, the feasibility and usefulness of a reliability based approach in the development of ship longitudinal strength requirements has been demonstrated.« less

Introducing Laboratory Safety.

ERIC Educational Resources Information Center

DeLorenzo, Ronald

1985-01-01

Presents a simple, 10-item quiz designed to make students aware that they must learn laboratory safety. The items include questions on acid/base accidents, several types of fire extinguishers, and safety glassses. Answers and some explanations are included. (DH)

Research on Heat Dissipation of Electric Vehicle Based on Safety Architecture Optimization

NASA Astrophysics Data System (ADS)

Zhou, Chao; Guo, Yajuan; Huang, Wei; Jiang, Haitao; Wu, Liwei

2017-10-01

In order to solve the problem of excessive temperature in the discharge process of lithium-ion battery and the temperature difference between batteries, a heat dissipation of electric vehicle based on safety architecture optimization is designed. The simulation is used to optimize the temperature field of the heat dissipation of the battery. A reasonable heat dissipation control scheme is formulated to achieve heat dissipation requirements. The results show that the ideal working temperature range of the lithium ion battery is 20?∼45?, and the temperature difference between the batteries should be controlled within 5?. A cooling fan is arranged at the original air outlet of the battery model, and the two cooling fans work in turn to realize the reciprocating flow. The temperature difference is controlled within 5? to ensure the good temperature uniformity between the batteries of the electric vehicle. Based on the above finding, it is concluded that the heat dissipation design for electric vehicle batteries is safe and effective, which is the most effective methods to ensure battery life and vehicle safety.

Design of 3D simulation engine for oilfield safety training

NASA Astrophysics Data System (ADS)

Li, Hua-Ming; Kang, Bao-Sheng

2015-03-01

Aiming at the demand for rapid custom development of 3D simulation system for oilfield safety training, this paper designs and implements a 3D simulation engine based on script-driven method, multi-layer structure, pre-defined entity objects and high-level tools such as scene editor, script editor, program loader. A scripting language been defined to control the system's progress, events and operating results. Training teacher can use this engine to edit 3D virtual scenes, set the properties of entity objects, define the logic script of task, and produce a 3D simulation training system without any skills of programming. Through expanding entity class, this engine can be quickly applied to other virtual training areas.

Design for Reliability and Safety Approach for the New NASA Launch Vehicle

NASA Technical Reports Server (NTRS)

Safie, Fayssal M.; Weldon, Danny M.

2007-01-01

The United States National Aeronautics and Space Administration (NASA) is in the midst of a space exploration program intended for sending crew and cargo to the international Space Station (ISS), to the moon, and beyond. This program is called Constellation. As part of the Constellation program, NASA is developing new launch vehicles aimed at significantly increase safety and reliability, reduce the cost of accessing space, and provide a growth path for manned space exploration. Achieving these goals requires a rigorous process that addresses reliability, safety, and cost upfront and throughout all the phases of the life cycle of the program. This paper discusses the "Design for Reliability and Safety" approach for the NASA new launch vehicles, the ARES I and ARES V. Specifically, the paper addresses the use of an integrated probabilistic functional analysis to support the design analysis cycle and a probabilistic risk assessment (PRA) to support the preliminary design and beyond.

The development of regulatory expectations for computer-based safety systems for the UK nuclear programme

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hughes, P. J.; Westwood, R.N; Mark, R. T.

2006-07-01

The Nuclear Installations Inspectorate (NII) of the UK's Health and Safety Executive (HSE) has completed a review of their Safety Assessment Principles (SAPs) for Nuclear Installations recently. During the period of the SAPs review in 2004-2005 the designers of future UK naval reactor plant were optioneering the control and protection systems that might be implemented. Because there was insufficient regulatory guidance available in the naval sector to support this activity the Defence Nuclear Safety Regulator (DNSR) invited the NII to collaborate with the production of a guidance document that provides clarity of regulatory expectations for the production of safety casesmore » for computer based safety systems. A key part of producing regulatory expectations was identifying the relevant extant standards and sector guidance that reflect good practice. The three principal sources of such good practice were: IAEA Safety Guide NS-G-1.1 (Software for Computer Based Systems Important to Safety in Nuclear Power Plants), European Commission consensus document (Common Position of European Nuclear Regulators for the Licensing of Safety Critical Software for Nuclear Reactors) and IEC nuclear sector standards such as IEC60880. A common understanding has been achieved between the NII and DNSR and regulatory guidance developed which will be used by both NII and DNSR in the assessment of computer-based safety systems and in the further development of more detailed joint technical assessment guidance for both regulatory organisations. (authors)« less

Design of Hack-Resistant Diabetes Devices and Disclosure of Their Cyber Safety

PubMed Central

Sackner-Bernstein, Jonathan

2017-01-01

Background: The focus of the medical device industry and regulatory bodies on cyber security parallels that in other industries, primarily on risk assessment and user education as well as the recognition and response to infiltration. However, transparency of the safety of marketed devices is lacking and developers are not embracing optimal design practices with new devices. Achieving cyber safe diabetes devices: To improve understanding of cyber safety by clinicians and patients, and inform decision making on use practices of medical devices requires disclosure by device manufacturers of the results of their cyber security testing. Furthermore, developers should immediately shift their design processes to deliver better cyber safety, exemplified by use of state of the art encryption, secure operating systems, and memory protections from malware. PMID:27837161

Design of Hack-Resistant Diabetes Devices and Disclosure of Their Cyber Safety.

PubMed

Sackner-Bernstein, Jonathan

2017-03-01

The focus of the medical device industry and regulatory bodies on cyber security parallels that in other industries, primarily on risk assessment and user education as well as the recognition and response to infiltration. However, transparency of the safety of marketed devices is lacking and developers are not embracing optimal design practices with new devices. Achieving cyber safe diabetes devices: To improve understanding of cyber safety by clinicians and patients, and inform decision making on use practices of medical devices requires disclosure by device manufacturers of the results of their cyber security testing. Furthermore, developers should immediately shift their design processes to deliver better cyber safety, exemplified by use of state of the art encryption, secure operating systems, and memory protections from malware.

Testing safety eyewear: how frame and lens design affect lens retention.

PubMed

McMahon, Janice M; Beckerman, Stephen

2007-02-01

The aim of this study was to determine the role that frame and lens design play in lens retention during high-impact testing of safety eyewear that advertises conformance to the performance-based ANSI Z87.1-2003 standard. A total of 75 Z87 safety eyeglass frames (3 each of 25 frame models) were used in this study, procured from 5 of the leading U.S. safety frame manufacturers. Frames were fitted by an independent laboratory with 2.0-mm plano polycarbonate lenses in compliance with ANSI Z87.1-2003. Finished spectacles were sent to a subsequent laboratory testing facility where each frame was subjected to both high-mass and oblique-incidence high-velocity impacts to determine frame characteristics that were most highly associated with testing failure. Among the frame and lens parameters that were considered in this analysis were the A and B dimensions, effective diameter, distance between lenses, bridge type, frame material, bevel type, and frame cost. Certain variables were controlled for by maintaining consistency among all spectacle pairs, e.g., lens prescription, center thickness, and edge thickness. Multiple logistic regression was used to control potential confounding variables and to develop the best combination of them for predictive value. Of 25 separate frame models assessed, 10 passed both high-mass and high-velocity impact testing, i.e., none of the 3 frame/lens samples failed. Of the models that failed, 13 failures were caused by high-velocity testing, 1 by high-mass testing, and 1 failed both high-mass and high-velocity testing. None of the 15 spectacles with the SprinGuardtrade mark (Hilco, Plainville, Massachusetts) bevel design failed, although these were proprietary to 1 manufacturer and included only 5 frame models. Two spectacle designs (6 individual frames) incorporated an inverted bevel design of which 3 of the frames failed impact testing. Controlling for drop ball velocity among the 54 remaining standard "V" bevel spectacle pairs, the odds of

Usability Methods for Ensuring Health Information Technology Safety: Evidence-Based Approaches. Contribution of the IMIA Working Group Health Informatics for Patient Safety.

PubMed

Borycki, E; Kushniruk, A; Nohr, C; Takeda, H; Kuwata, S; Carvalho, C; Bainbridge, M; Kannry, J

2013-01-01

Issues related to lack of system usability and potential safety hazards continue to be reported in the health information technology (HIT) literature. Usability engineering methods are increasingly used to ensure improved system usability and they are also beginning to be applied more widely for ensuring the safety of HIT applications. These methods are being used in the design and implementation of many HIT systems. In this paper we describe evidence-based approaches to applying usability engineering methods. A multi-phased approach to ensuring system usability and safety in healthcare is described. Usability inspection methods are first described including the development of evidence-based safety heuristics for HIT. Laboratory-based usability testing is then conducted under artificial conditions to test if a system has any base level usability problems that need to be corrected. Usability problems that are detected are corrected and then a new phase is initiated where the system is tested under more realistic conditions using clinical simulations. This phase may involve testing the system with simulated patients. Finally, an additional phase may be conducted, involving a naturalistic study of system use under real-world clinical conditions. The methods described have been employed in the analysis of the usability and safety of a wide range of HIT applications, including electronic health record systems, decision support systems and consumer health applications. It has been found that at least usability inspection and usability testing should be applied prior to the widespread release of HIT. However, wherever possible, additional layers of testing involving clinical simulations and a naturalistic evaluation will likely detect usability and safety issues that may not otherwise be detected prior to widespread system release. The framework presented in the paper can be applied in order to develop more usable and safer HIT, based on multiple layers of evidence.

Cornell Alliance for Science Evaluation of Consensus on Genetically Modified Food Safety: Weaknesses in Study Design

PubMed Central

Antoniou, Michael N.; Robinson, Claire J.

2017-01-01

Cornell Alliance for Science has launched an initiative in which “citizen scientists” are called upon to evaluate studies on health risks of genetically modified (GM) crops and foods. The purpose is to establish whether the consensus on GM food safety claimed by the American Association for the Advancement of Science (AAAS) is supported by a review of the scientific literature. The Alliance’s citizen scientists are examining more than 12,000 publication abstracts to quantify how far the scientific literature supports the AAAS’s statement. We identify a number of fundamental weaknesses in the Alliance’s study design, including evaluation is based only on information provided in the publication abstract; there is a lack of clarity as to what material is included in the 12,000 study abstracts to be reviewed, since the number of appropriately designed investigations addressing GM food safety are few; there is uncertainty as to whether studies of toxic effects arising from GM crop-associated pesticides will be included; there is a lack of clarity regarding whether divergent yet equally valid interpretations of the same study will be taken into account; and there is no definition of the cutoff point for consensus or non-consensus on GM food safety. In addition, vital industry proprietary biosafety data on GM crops and associated pesticides are not publicly available and is thus cannot inform this project. Based on these weaknesses in the study design, we believe it is questionable as to whether any objective or meaningful conclusion can be drawn from the Alliance’s initiative. PMID:28447029

Cornell Alliance for Science Evaluation of Consensus on Genetically Modified Food Safety: Weaknesses in Study Design.

PubMed

Antoniou, Michael N; Robinson, Claire J

2017-01-01

Cornell Alliance for Science has launched an initiative in which "citizen scientists" are called upon to evaluate studies on health risks of genetically modified (GM) crops and foods. The purpose is to establish whether the consensus on GM food safety claimed by the American Association for the Advancement of Science (AAAS) is supported by a review of the scientific literature. The Alliance's citizen scientists are examining more than 12,000 publication abstracts to quantify how far the scientific literature supports the AAAS's statement. We identify a number of fundamental weaknesses in the Alliance's study design, including evaluation is based only on information provided in the publication abstract; there is a lack of clarity as to what material is included in the 12,000 study abstracts to be reviewed, since the number of appropriately designed investigations addressing GM food safety are few; there is uncertainty as to whether studies of toxic effects arising from GM crop-associated pesticides will be included; there is a lack of clarity regarding whether divergent yet equally valid interpretations of the same study will be taken into account; and there is no definition of the cutoff point for consensus or non-consensus on GM food safety. In addition, vital industry proprietary biosafety data on GM crops and associated pesticides are not publicly available and is thus cannot inform this project. Based on these weaknesses in the study design, we believe it is questionable as to whether any objective or meaningful conclusion can be drawn from the Alliance's initiative.

Market-based control mechanisms for patient safety

PubMed Central

Coiera, E; Braithwaite, J

2009-01-01

A new model is proposed for enhancing patient safety using market-based control (MBC), inspired by successful approaches to environmental governance. Emissions trading, enshrined in the Kyoto protocol, set a carbon price and created a carbon market—is it possible to set a patient safety price and let the marketplace find ways of reducing clinically adverse events? To “cap and trade,” a regulator would need to establish system-wide and organisation-specific targets, based on the cost of adverse events, create a safety market for trading safety credits and then police the market. Organisations are given a clear policy signal to reduce adverse event rates, are told by how much, but are free to find mechanisms best suited to their local needs. The market would inevitably generate novel ways of creating safety credits, and accountability becomes hard to evade when adverse events are explicitly measured and accounted for in an organisation’s bottom line. PMID:19342522

Safety design considerations for lithium batteries in CF applications

NASA Astrophysics Data System (ADS)

Moroz, W. J.

1981-02-01

Lithium-sulphur dioxide (Li-SO2) primary cells are being introduced as power supplies into Canadian Forces applications where advantage can be taken of their high energy density characteristics and low temperature capabilities. For safety reasons the high energy capabilities of these cells must be protected against the possibility of accidental abuse. DREO has investigated and identified a number of operational problem areas associated with Li-SO2 systems. Safety design considerations are proposed for three CF applications; the PRC 515 Radio Set/Radar Transponder SST-181X applications and the AN/PRQ-501 Personal Locater Beacon.

An Evaluation of the Added Value of Co-Design in the Development of an Educational Game for Road Safety

ERIC Educational Resources Information Center

All, Anissa; Van Looy, Jan; Castellar, Elena Patricia Nuñez

2013-01-01

This study explores the added value of co-design in addition to other innovation research methods in the process of developing a serious game design document for a road safety game. The sessions aimed at exploring 4 aspects of a location-based game experience: themes, game mechanics, mobile phone applications and locations for mini-games. In…

Designing Crane Controls with Applied Mechanical and Electrical Safety Features

NASA Technical Reports Server (NTRS)

Lytle, Bradford P.; Walczak, Thomas A.

2002-01-01

The use of overhead traveling bridge cranes in many varied applications is common practice. In particular, the use of cranes in the nuclear, military, commercial, aerospace, and other industries can involve safety critical situations. Considerations for Human Injury or Casualty, Loss of Assets, Endangering the Environment, or Economic Reduction must be addressed. Traditionally, in order to achieve additional safety in these applications, mechanical systems have been augmented with a variety of devices. These devices assure that a mechanical component failure shall reduce the risk of a catastrophic loss of the correct and/or safe load carrying capability. ASME NOG-1-1998, (Rules for Construction of Overhead and Gantry Cranes, Top Running Bridge, and Multiple Girder), provides design standards for cranes in safety critical areas. Over and above the minimum safety requirements of todays design standards, users struggle with obtaining a higher degree of reliability through more precise functional specifications while attempting to provide "smart" safety systems. Electrical control systems also may be equipped with protective devices similar to the mechanical design features. Demands for improvement of the cranes "control system" is often recognized, but difficult to quantify for this traditionally "mechanically" oriented market. Finite details for each operation must be examined and understood. As an example, load drift (or small motions) at close tolerances can be unacceptable (and considered critical). To meet these high functional demands encoders and other devices are independently added to control systems to provide motion and velocity feedback to the control drive. This paper will examine the implementation of Programmable Electronic Systems (PES). PES is a term this paper will use to describe any control system utilizing any programmable electronic device such as Programmable Logic Controllers (PLC), or an Adjustable Frequency Drive (AID) 'smart' programmable

77 FR 74196 - Draft Guidance for Industry on Safety Considerations for Product Design To Minimize Medication...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-13

... document, which addresses safety achieved through drug product design, is the first in a series of planned...] Draft Guidance for Industry on Safety Considerations for Product Design To Minimize Medication Errors... Considerations for Product Design to Minimize Medication Errors.'' The draft guidance provides sponsors of...

Evidence-based safety (EBS) management: A new approach to teaching the practice of safety management (SM).

PubMed

Wang, Bing; Wu, Chao; Shi, Bo; Huang, Lang

2017-12-01

In safety management (SM), it is important to make an effective safety decision based on the reliable and sufficient safety-related information. However, many SM failures in organizations occur for a lack of the necessary safety-related information for safety decision-making. Since facts are the important basis and foundation for decision-making, more efforts to seek the best evidence relevant to a particular SM problem would lead to a more effective SM solution. Therefore, the new paradigm for decision-making named "evidence-based practice (EBP)" can hold important implications for SM, because it uses the current best evidence for effective decision-making. Based on a systematic review of existing SM approaches and an analysis of reasons why we need new SM approaches, we created a new SM approach called evidence-based safety (EBS) management by introducing evidence-based practice into SM. It was necessary to create new SM approaches. A new SM approach called EBS was put forward, and the basic questions of EBS such as its definition and core were analyzed in detail. Moreover, the determinants of EBS included manager's attitudes towards EBS; evidence-based consciousness in SM; evidence sources; technical support; EBS human resources; organizational culture; and individual attributes. EBS is a new and effective approach to teaching the practice of SM. Of course, further research on EBS should be carried out to make EBS a reality. Practical applications: Our work can provide a new and effective idea and method to teach the practice of SM. Specifically, EBS proposed in our study can help safety professionals make an effective safety decision based on a firm foundation of high-grade evidence. Copyright © 2017 National Safety Council and Elsevier Ltd. All rights reserved.

A web-based tool for the Comprehensive Unit-based Safety Program (CUSP).

PubMed

Pronovost, Peter J; King, Jay; Holzmueller, Christine G; Sawyer, Melinda; Bivens, Shauna; Michael, Michelle; Haig, Kathy; Paine, Lori; Moore, Dana; Miller, Marlene

2006-03-01

An organization's ability to change is driven by its culture, which in turn has a significant impact on safety. The six-step Comprehensive Unit-Based Safety Program (CUSP) is intended to improve local culture and safety. A Web-based project management tool for CUSP was developed and then pilot tested at two hospitals. HOW ECUSP WORKS: Once a patient safety concern is identified (step 3), a unit-level interdisciplinary safety committee determines issue criticality and starts up the projects (step 4), which are managed using project management tools within eCUSP (step 5). On a project's completion, the results are disseminated through a shared story (step 6). OSF St. Joseph's Medical Center-The Medical Birthing Center (Bloomington, Illinois), identified 11 safety issues, implemented 11 projects, and created 9 shared stories--including one for its Armband Project. The Johns Hopkins Hospital (Baltimore) Medical Progressive Care (MPC4) Unit identified 5 safety issues and implemented 4 ongoing projects, including the intravenous (IV) Tubing Compliance Project. The eCUSP tool's success depends on an organizational commitment to creating a culture of safety.

Applying Sensor-Based Technology to Improve Construction Safety Management.

PubMed

Zhang, Mingyuan; Cao, Tianzhuo; Zhao, Xuefeng

2017-08-11

Construction sites are dynamic and complicated systems. The movement and interaction of people, goods and energy make construction safety management extremely difficult. Due to the ever-increasing amount of information, traditional construction safety management has operated under difficult circumstances. As an effective way to collect, identify and process information, sensor-based technology is deemed to provide new generation of methods for advancing construction safety management. It makes the real-time construction safety management with high efficiency and accuracy a reality and provides a solid foundation for facilitating its modernization, and informatization. Nowadays, various sensor-based technologies have been adopted for construction safety management, including locating sensor-based technology, vision-based sensing and wireless sensor networks. This paper provides a systematic and comprehensive review of previous studies in this field to acknowledge useful findings, identify the research gaps and point out future research directions.

Offshore safety case approach and formal safety assessment of ships.

PubMed

Wang, J

2002-01-01

Tragic marine and offshore accidents have caused serious consequences including loss of lives, loss of property, and damage of the environment. A proactive, risk-based "goal setting" regime is introduced to the marine and offshore industries to increase the level of safety. To maximize marine and offshore safety, risks need to be modeled and safety-based decisions need to be made in a logical and confident way. Risk modeling and decision-making tools need to be developed and applied in a practical environment. This paper describes both the offshore safety case approach and formal safety assessment of ships in detail with particular reference to the design aspects. The current practices and the latest development in safety assessment in both the marine and offshore industries are described. The relationship between the offshore safety case approach and formal ship safety assessment is described and discussed. Three examples are used to demonstrate both the offshore safety case approach and formal ship safety assessment. The study of risk criteria in marine and offshore safety assessment is carried out. The recommendations on further work required are given. This paper gives safety engineers in the marine and offshore industries an overview of the offshore safety case approach and formal ship safety assessment. The significance of moving toward a risk-based "goal setting" regime is given.

Proposed system safety design and test requirements for the microlaser ordnance system

NASA Technical Reports Server (NTRS)

Stoltz, Barb A.; Waldo, Dale F.

1993-01-01

Safety for pyrotechnic ignition systems is becoming a major concern for the military. In the past twenty years, stray electromagnetic fields have steadily increased during peacetime training missions and have dramatically increased during battlefield missions. Almost all of the ordnance systems in use today depend on an electrical bridgewire for ignition. Unfortunately, the bridgewire is the cause of the majority of failure modes. The common failure modes include the following: broken bridgewires; transient RF power, which induces bridgewire heating; and cold temperatures, which contracts the explosive mix away from the bridgewire. Finding solutions for these failure modes is driving the costs of pyrotechnic systems up. For example, analyses are performed to verify that the system in the environment will not see more energy than 20 dB below the 'No-fire' level. Range surveys are performed to determine the operational, storage, and transportation RF environments. Cryogenic tests are performed to verify the bridgewire to mix interface. System requirements call for 'last minute installation,' 'continuity checks after installation,' and rotating safety devices to 'interrupt the explosive train.' As an alternative, MDESC has developed a new approach based upon our enabling laser diode technology. We believe that Microlaser initiated ordnance offers a unique solution to the bridgewire safety concerns. For this presentation, we will address, from a system safety viewpoint, the safety design and the test requirements for a Microlaser ordnance system. We will also review how this system could be compliant to MIL-STD-1576 and DOD-83578A and the additional necessary requirements.

A randomized controlled trial to evaluate the Make Safe Happen® app-a mobile technology-based safety behavior change intervention for increasing parents' safety knowledge and actions.

PubMed

McKenzie, Lara B; Roberts, Kristin J; Clark, Roxanne; McAdams, Rebecca; Abdel-Rasoul, Mahmoud; Klein, Elizabeth G; Keim, Sarah A; Kristel, Orie; Szymanski, Alison; Cotton, Christopher G; Shields, Wendy C

2018-03-12

Many unintentional injuries that occur in and around the home can be prevented through the use of safety equipment and by consistently following existing safety recommendations. Unfortunately, uptake of these safety behaviors is unacceptably low. This paper describes the design of the Make Safe Happen® smartphone application evaluation study, which aims to evaluate a mobile technology-based safety behavior change intervention on parents' safety knowledge and actions. Make Safe Happen® app evaluation study is a randomized controlled trial. Participants will be parents of children aged 0-12 years who are recruited from national consumer online survey panels. Parents will complete a pretest survey, and will be randomized to receive the Make Safe Happen® app or a non-injury-related app, and then complete a posttest follow-up survey after 1 week. Primary outcomes are: (1) safety knowledge; (2) safety behaviors; (3) safety device acquisition and use, and (4) behavioral intention to take safety actions. Anticipated study results are presented. Wide-reaching interventions, to reach substantial parent and caregiver audiences, to effectively reduce childhood injuries are needed. This study will contribute to the evidence-base about how to increase safety knowledge and actions to prevent home-related injuries in children. NCT02751203 ; Pre-results.

Does classroom-based Crew Resource Management training improve patient safety culture? A systematic review

PubMed Central

de Bruijne, Martine C; Zwijnenberg, Nicolien C; Jansma, Elise P; van Dyck, Cathy; Wagner, Cordula

2014-01-01

Aim: To evaluate the evidence of the effectiveness of classroom-based Crew Resource Management training on safety culture by a systematic review of literature. Methods: Studies were identified in PubMed, Cochrane Library, PsycINFO, and Educational Resources Information Center up to 19 December 2012. The Methods Guide for Comparative Effectiveness Reviews was used to assess the risk of bias in the individual studies. Results: In total, 22 manuscripts were included for review. Training settings, study designs, and evaluation methods varied widely. Most studies reporting only a selection of culture dimensions found mainly positive results, whereas studies reporting all safety culture dimensions of the particular survey found mixed results. On average, studies were at moderate risk of bias. Conclusion: Evidence of the effectiveness of Crew Resource Management training in health care on safety culture is scarce and the validity of most studies is limited. The results underline the necessity of more valid study designs, preferably using triangulation methods. PMID:26770720

Computer-based mechanical design of overhead lines

NASA Astrophysics Data System (ADS)

Rusinaru, D.; Bratu, C.; Dinu, R. C.; Manescu, L. G.

2016-02-01

Beside the performance, the safety level according to the actual standards is a compulsory condition for distribution grids’ operation. Some of the measures leading to improvement of the overhead lines reliability ask for installations’ modernization. The constraints imposed to the new lines components refer to the technical aspects as thermal stress or voltage drop, and look for economic efficiency, too. The mechanical sizing of the overhead lines is after all an optimization problem. More precisely, the task in designing of the overhead line profile is to size poles, cross-arms and stays and locate poles along a line route so that the total costs of the line's structure to be minimized and the technical and safety constraints to be fulfilled.The authors present in this paper an application for the Computer-Based Mechanical Design of the Overhead Lines and the features of the corresponding Visual Basic program, adjusted to the distribution lines. The constraints of the optimization problem are adjusted to the existing weather and loading conditions of Romania. The outputs of the software application for mechanical design of overhead lines are: the list of components chosen for the line: poles, cross-arms, stays; the list of conductor tension and forces for each pole, cross-arm and stay for different weather conditions; the line profile drawings.The main features of the mechanical overhead lines design software are interactivity, local optimization function and high-level user-interface

Prediction based active ramp metering control strategy with mobility and safety assessment

NASA Astrophysics Data System (ADS)

Fang, Jie; Tu, Lili

2018-04-01

Ramp metering is one of the most direct and efficient motorway traffic flow management measures so as to improve traffic conditions. However, owing to short of traffic conditions prediction, in earlier studies, the impact on traffic flow dynamics of the applied RM control was not quantitatively evaluated. In this study, a RM control algorithm adopting Model Predictive Control (MPC) framework to predict and assess future traffic conditions, which taking both the current traffic conditions and the RM-controlled future traffic states into consideration, was presented. The designed RM control algorithm targets at optimizing the network mobility and safety performance. The designed algorithm is evaluated in a field-data-based simulation. Through comparing the presented algorithm controlled scenario with the uncontrolled scenario, it was proved that the proposed RM control algorithm can effectively relieve the congestion of traffic network with no significant compromises in safety aspect.

Development and Evaluation of an Online, Inquiry-Based Food Safety Education Program for Secondary Teachers and Their Students

ERIC Educational Resources Information Center

Beffa-Negrini, Patricia A.; Cohen, Nancy L.; Laus, Mary Jane; McLandsborough, Lynne A.

2007-01-01

Secondary science teachers who integrate food safety (FS) into curricula can provide FS knowledge and skills to youth while reinforcing science skills and concepts. National science education standards and the Biological Science Curriculum Study 5E Inquiry-based Learning Model were used to design an online training, Food Safety FIRST. The training…

The Research on Safety Management Information System of Railway Passenger Based on Risk Management Theory

NASA Astrophysics Data System (ADS)

Zhu, Wenmin; Jia, Yuanhua

2018-01-01

Based on the risk management theory and the PDCA cycle model, requirements of the railway passenger transport safety production is analyzed, and the establishment of the security risk assessment team is proposed to manage risk by FTA with Delphi from both qualitative and quantitative aspects. The safety production committee is also established to accomplish performance appraisal, which is for further ensuring the correctness of risk management results, optimizing the safety management business processes and improving risk management capabilities. The basic framework and risk information database of risk management information system of railway passenger transport safety are designed by Ajax, Web Services and SQL technologies. The system realizes functions about risk management, performance appraisal and data management, and provides an efficient and convenient information management platform for railway passenger safety manager.

Applying Sensor-Based Technology to Improve Construction Safety Management

PubMed Central

Zhang, Mingyuan; Cao, Tianzhuo; Zhao, Xuefeng

2017-01-01

Construction sites are dynamic and complicated systems. The movement and interaction of people, goods and energy make construction safety management extremely difficult. Due to the ever-increasing amount of information, traditional construction safety management has operated under difficult circumstances. As an effective way to collect, identify and process information, sensor-based technology is deemed to provide new generation of methods for advancing construction safety management. It makes the real-time construction safety management with high efficiency and accuracy a reality and provides a solid foundation for facilitating its modernization, and informatization. Nowadays, various sensor-based technologies have been adopted for construction safety management, including locating sensor-based technology, vision-based sensing and wireless sensor networks. This paper provides a systematic and comprehensive review of previous studies in this field to acknowledge useful findings, identify the research gaps and point out future research directions. PMID:28800061

Safety of street: The role of street design

NASA Astrophysics Data System (ADS)

Rashid, Suhaila Abdul; Wahab, Mohammad Hussaini; Rani, Wan Nurul Mardiah Wan Mohd.; Ismail, Syuhaida

2017-10-01

Living in the cities poses many challenges for the vulnerable group of user especially women where they are exposed to many issues related to safety. With the changing of lifestyle and demands, women are expected to play multiple roles in the society and working is one of the tasks. When women are expected to be working as men do, they are no longer occupied at one place. Women nowadays travel on a daily basis and being in the streets is one of the important activities. With the influx of diverse group of people into the country, our streets are dominated by different types of people from different background. Due to these factors, there are possibilities of challenges and threats for users especially women. Therefore, city spaces especially the street become an important public realm for women. The design of the street should be able to make women feel safe as these are the public space where they spend time getting to and from work. The way women perceived their environment might be different from men especially when they fear of crime. Perception of safety will affect the quality of life where fear is an important psychological factor in human life. Living in fear will restrict human's freedom. Therefore, this study aimed to explore women's perception of safety in the streets of Kuala Lumpur. The study adopted a mixed-method approach of qualitative and quantitative in order to understand the safety perception among women that will later establish the relationship between built environment and human psychology. 120 respondents were selected randomly around Jalan Benteng, Jalan Tun Perak, Jalan Melaka and Jalan Melayu. Questionnaire survey forms were distributed and structured observation was conducted at interval period at these streets to examined and assess women's behavior. Finding shows that fear does affect women's perception and physical design of the streets are important in affecting their behavior.

Fire safety design of a mobile quarantine facility

NASA Technical Reports Server (NTRS)

Bass, R. S.; Hirasaki, J. K.

1971-01-01

During the design phase of the Mobile Quarantine Facility (MQF), a primary consideration was fire safety. Therefore, appropriate criteria and ground rules were used in the design and construction of the facility. The fire codes and fire-requirement listings that are used by commerical airlines were supplied to the Manned Spacecraft Center (MSC) by the Federal Aviation Agency (FAA). After these codes were reviewed, a basic ground rule was adopted that flame protection for all combustible materials should be at least equivalent to or better than the standards for commercial aircraft. Because the MQF was designed to operate with an interior atmosphere of air rather than with an oxygen-enriched atmosphere such as that of the Apollo spacecraft cabin, the requirements for MQF material were not as stringent as those for the spacecraft.

Pharmacological mechanism-based drug safety assessment and prediction.

PubMed

Abernethy, D R; Woodcock, J; Lesko, L J

2011-06-01

Advances in cheminformatics, bioinformatics, and pharmacology in the context of biological systems are now at a point that these tools can be applied to mechanism-based drug safety assessment and prediction. The development of such predictive tools at the US Food and Drug Administration (FDA) will complement ongoing efforts in drug safety that are focused on spontaneous adverse event reporting and active surveillance to monitor drug safety. This effort will require the active collaboration of scientists in the pharmaceutical industry, academe, and the National Institutes of Health, as well as those at the FDA, to reach its full potential. Here, we describe the approaches and goals for the mechanism-based drug safety assessment and prediction program.

Remote Safety Monitoring for Elderly Persons Based on Omni-Vision Analysis

PubMed Central

Xiang, Yun; Tang, Yi-ping; Ma, Bao-qing; Yan, Hang-chen; Jiang, Jun; Tian, Xu-yuan

2015-01-01

Remote monitoring service for elderly persons is important as the aged populations in most developed countries continue growing. To monitor the safety and health of the elderly population, we propose a novel omni-directional vision sensor based system, which can detect and track object motion, recognize human posture, and analyze human behavior automatically. In this work, we have made the following contributions: (1) we develop a remote safety monitoring system which can provide real-time and automatic health care for the elderly persons and (2) we design a novel motion history or energy images based algorithm for motion object tracking. Our system can accurately and efficiently collect, analyze, and transfer elderly activity information and provide health care in real-time. Experimental results show that our technique can improve the data analysis efficiency by 58.5% for object tracking. Moreover, for the human posture recognition application, the success rate can reach 98.6% on average. PMID:25978761

A Safety Program that Integrated Behavior-Based Safety and Traditional Safety Methods and Its Effects on Injury Rates of Manufacturing Workers

ERIC Educational Resources Information Center

Hermann, Jaime A.; Ibarra, Guillermo V.; Hopkins, B. L.

2010-01-01

The present research examines the effects of a complex safety program that combined Behavior-Based Safety (BBS) and traditional safety methods. The study was conducted in an automobile parts plant in Mexico. Two sister plants served as comparison. Some of the components of the safety programs addressed behaviors of managers and included methods…

Nature-Based Strategies for Improving Urban Health and Safety.

PubMed

Kondo, Michelle C; South, Eugenia C; Branas, Charles C

2015-10-01

Place-based programs are being noticed as key opportunities to prevent disease and promote public health and safety for populations at-large. As one key type of place-based intervention, nature-based and green space strategies can play an especially large role in improving health and safety for dwellers in urban environments such as US legacy cities that lack nature and greenery. In this paper, we describe the current understanding of place-based influences on public health and safety. We focus on nonchemical environmental factors, many of which are related to urban abandonment and blight. We then review findings from studies of nature-based interventions regarding impacts on health, perceptions of safety, and crime. Based on our findings, we suggest that further research in this area will require (1) refined measures of green space, nature, and health and safety for cities, (2) interdisciplinary science and cross-sector policy collaboration, (3) observational studies as well as randomized controlled experiments and natural experiments using appropriate spatial counterfactuals and mixed methods, and (4) return-on-investment calculations of potential economic, social, and health costs and benefits of urban greening initiatives.

Research on Safety Monitoring System of Tailings Dam Based on Internet of Things

NASA Astrophysics Data System (ADS)

Wang, Ligang; Yang, Xiaocong; He, Manchao

2018-03-01

The paper designed and implemented the safety monitoring system of tailings dam based on Internet of things, completed the hardware and software design of sensor nodes, routing nodes and coordinator node by using ZigBee wireless sensor chip CC2630 and 3G/4G data transmission module, developed the software platform integrated with geographic information system. The paper achieved real-time monitoring and data collection of tailings dam dam deformation, seepage line, water level and rainfall for all-weather, the stability of tailings dam based on the Internet of things monitoring is analyzed, and realized intelligent and scientific management of tailings dam under the guidance of the remote expert system.

Designing Serious Games for Safety Education: "Learn to Brace" versus Traditional Pictorials for Aircraft Passengers.

PubMed

Chittaro, Luca

2016-05-01

Serious games for safety education (SGSE) are a novel tool for preparing people to prevent and\\or handle risky situations. Although several SGSE have been developed, design and evaluation methods for SGSE need to be better grounded in and guided by safety-relevant psychological theories. In particular, this paper focuses on threat appeals and the assessment of variables, such as safety locus of control, that influence human behavior in real risky situations. It illustrates how we took into account such models in the design and evaluation of "Learn to Brace", a first-of-its-kind serious game that deals with a major problem in aviation safety, i.e. the scarce effectiveness of the safety cards used by airlines. The study considered a sample of 48 users: half of them received instructions about the brace position through the serious game, the other half through a traditional safety card pictorial. Results showed that the serious game was much more effective than the traditional instructions both in terms of learning and of changing safety-relevant perceptions, especially safety locus of control and recommendation perception.

Space-Based Range Safety and Future Space Range Applications

NASA Technical Reports Server (NTRS)

Whiteman, Donald E.; Valencia, Lisa M.; Simpson, James C.

2005-01-01

The National Aeronautics and Space Administration (NASA) Space-Based Telemetry and Range Safety (STARS) study is a multiphase project to demonstrate the performance, flexibility and cost savings that can be realized by using space-based assets for the Range Safety [global positioning system (GPS) metric tracking data, flight termination command and range safety data relay] and Range User (telemetry) functions during vehicle launches and landings. Phase 1 included flight testing S-band Range Safety and Range User hardware in 2003 onboard a high-dynamic aircraft platform at Dryden Flight Research Center (Edwards, California, USA) using the NASA Tracking and Data Relay Satellite System (TDRSS) as the communications link. The current effort, Phase 2, includes hardware and packaging upgrades to the S-band Range Safety system and development of a high data rate Ku-band Range User system. The enhanced Phase 2 Range Safety Unit (RSU) provided real-time video for three days during the historic Global Flyer (Scaled Composites, Mojave, California, USA) flight in March, 2005. Additional Phase 2 testing will include a sounding rocket test of the Range Safety system and aircraft flight testing of both systems. Future testing will include a flight test on a launch vehicle platform. This paper discusses both Range Safety and Range User developments and testing with emphasis on the Range Safety system. The operational concept of a future space-based range is also discussed.

Space-Based Range Safety and Future Space Range Applications

NASA Technical Reports Server (NTRS)

Whiteman, Donald E.; Valencia, Lisa M.; Simpson, James C.

2005-01-01

The National Aeronautics and Space Administration Space-Based Telemetry and Range Safety study is a multiphase project to demonstrate the performance, flexibility and cost savings that can be realized by using space-based assets for the Range Safety (global positioning system metric tracking data, flight termination command and range safety data relay) and Range User (telemetry) functions during vehicle launches and landings. Phase 1 included flight testing S-band Range Safety and Range User hardware in 2003 onboard a high-dynamic aircraft platform at Dryden Flight Research Center (Edwards, California) using the NASA Tracking and Data Relay Satellite System as the communications link. The current effort, Phase 2, includes hardware and packaging upgrades to the S-band Range Safety system and development of a high data rate Ku-band Range User system. The enhanced Phase 2 Range Safety Unit provided real-time video for three days during the historic GlobalFlyer (Scaled Composites, Mojave, California) flight in March, 2005. Additional Phase 2 testing will include a sounding rocket test of the Range Safety system and aircraft flight testing of both systems. Future testing will include a flight test on a launch vehicle platform. This report discusses both Range Safety and Range User developments and testing with emphasis on the Range Safety system. The operational concept of a future space-based range is also discussed.

Bayesian-network-based safety risk assessment for steel construction projects.

PubMed

Leu, Sou-Sen; Chang, Ching-Miao

2013-05-01

There are four primary accident types at steel building construction (SC) projects: falls (tumbles), object falls, object collapse, and electrocution. Several systematic safety risk assessment approaches, such as fault tree analysis (FTA) and failure mode and effect criticality analysis (FMECA), have been used to evaluate safety risks at SC projects. However, these traditional methods ineffectively address dependencies among safety factors at various levels that fail to provide early warnings to prevent occupational accidents. To overcome the limitations of traditional approaches, this study addresses the development of a safety risk-assessment model for SC projects by establishing the Bayesian networks (BN) based on fault tree (FT) transformation. The BN-based safety risk-assessment model was validated against the safety inspection records of six SC building projects and nine projects in which site accidents occurred. The ranks of posterior probabilities from the BN model were highly consistent with the accidents that occurred at each project site. The model accurately provides site safety-management abilities by calculating the probabilities of safety risks and further analyzing the causes of accidents based on their relationships in BNs. In practice, based on the analysis of accident risks and significant safety factors, proper preventive safety management strategies can be established to reduce the occurrence of accidents on SC sites. Copyright © 2013 Elsevier Ltd. All rights reserved.

An aspect-oriented approach for designing safety-critical systems

NASA Astrophysics Data System (ADS)

Petrov, Z.; Zaykov, P. G.; Cardoso, J. P.; Coutinho, J. G. F.; Diniz, P. C.; Luk, W.

The development of avionics systems is typically a tedious and cumbersome process. In addition to the required functions, developers must consider various and often conflicting non-functional requirements such as safety, performance, and energy efficiency. Certainly, an integrated approach with a seamless design flow that is capable of requirements modelling and supporting refinement down to an actual implementation in a traceable way, may lead to a significant acceleration of development cycles. This paper presents an aspect-oriented approach supported by a tool chain that deals with functional and non-functional requirements in an integrated manner. It also discusses how the approach can be applied to development of safety-critical systems and provides experimental results.

A revolutionary design change to improve stapler safety.

PubMed

Arteaga-González, Iván J

2013-01-01

Postoperative staple line leaks and bleeding are the most common reasons for complications in surgical procedures that involve organ resection, such as sleeve gastrectomy. Increasing the safety of these operations requires improving the instruments (endostaplers or endocutters) used for stapling and sectioning the tissues. We present a new prototype stapler for marketing in resection surgery, especially designed for the sleeve gastrectomy. We suggest that the medical instrument industry creates devices in which the channel along which the knife blade runs is located asymmetrically. This would allow more staples to be placed on the side of the gastric remnant, thus improving the sealing and hemostasis of the suture line and reducing the number of complications for patients as a result. The application of new concepts in medical surgical devices can improve the safety of the procedures in our patients.

Is the large simple trial design used for comparative, post-approval safety research? A review of a clinical trials registry and the published literature.

PubMed

Reynolds, Robert F; Lem, Joanna A; Gatto, Nicolle M; Eng, Sybil M

2011-10-01

Post-approval, observational drug safety studies face well known difficulties in controlling for confounding, particularly confounding by indication for drug use. A study design that addresses confounding by indication is the large simple trial (LST). LSTs are characterized by large sample sizes, often in the thousands; broad entry criteria consistent with the approved medication label; randomization based on equipoise, i.e. neither physician nor patient believes that one treatment option is superior; minimal, streamlined data collection requirements; objectively-measured endpoints (e.g. death, hospitalization); and follow-up that minimizes interventions or interference with normal clinical practice. In theory then, the LST is a preferred study design for drug and vaccine safety research because it controls for biases inherent to observational research while still providing results that are generalizable to 'real-world' use. To evaluate whether LSTs are used for comparative safety evaluation and if the design is, in fact, advantageous compared with other designs, we conducted a review of the published literature (1949 through 31 December 2010) and the ClinicalTrials.gov registry (2000 through 31 December 2010). Thirteen ongoing or completed safety LSTs were identified. The design has rarely been used in comparative drug safety research, which is due to the operational, financial and scientific hurdles of implementing the design. The studies that have been completed addressed important clinical questions and, in some cases, led to re-evaluation of medical practice. We conclude the design has demonstrated utility for comparative safety research of medicines and vaccines if the necessary scientific and operational conditions for its use are met.

Efficacy and safety of a clinically relevant foamy vector design in human hematopoietic repopulating cells.

PubMed

Everson, Elizabeth M; Hocum, Jonah D; Trobridge, Grant D

2018-06-23

Previous studies have shown that foamy viral (FV) vectors are a promising alternative to gammaretroviral and lentiviral vectors and insulators can improve FV vector safety. However, in a previous analysis of insulator effects on FV vector safety, strong viral promoters were used to elicit genotoxic events. Here we developed and analyzed the efficacy and safety of a high-titer, clinically relevant FV vector driven by the housekeeping promoter elongation factor-1α and insulated with an enhancer blocking A1 insulator (FV-EGW-A1). Human CD34 + cord blood cells were exposed to an enhanced green fluorescent protein expressing vector, FV-EGW-A1, at a multiplicity of infection of 10 and then maintained in vitro or transplanted into immunodeficient mice. Flow cytometry was used to measure engraftment and marking in vivo. FV vector integration sites were analyzed to assess safety. FV-EGW-A1 resulted in high-marking, multi-lineage engraftment of human repopulating cells with no evidence of silencing. Engraftment was highly polyclonal with no clonal dominance and a promising safety profile based on integration site analysis. An FV vector with an elongation factor-1α promoter and an A1 insulator is a promising vector design for use in the clinic. This article is protected by copyright. All rights reserved.

Analyzing Reliability and Performance Trade-Offs of HLS-Based Designs in SRAM-Based FPGAs Under Soft Errors

NASA Astrophysics Data System (ADS)

Tambara, Lucas Antunes; Tonfat, Jorge; Santos, André; Kastensmidt, Fernanda Lima; Medina, Nilberto H.; Added, Nemitala; Aguiar, Vitor A. P.; Aguirre, Fernando; Silveira, Marcilei A. G.

2017-02-01

The increasing system complexity of FPGA-based hardware designs and shortening of time-to-market have motivated the adoption of new designing methodologies focused on addressing the current need for high-performance circuits. High-Level Synthesis (HLS) tools can generate Register Transfer Level (RTL) designs from high-level software programming languages. These tools have evolved significantly in recent years, providing optimized RTL designs, which can serve the needs of safety-critical applications that require both high performance and high reliability levels. However, a reliability evaluation of HLS-based designs under soft errors has not yet been presented. In this work, the trade-offs of different HLS-based designs in terms of reliability, resource utilization, and performance are investigated by analyzing their behavior under soft errors and comparing them to a standard processor-based implementation in an SRAM-based FPGA. Results obtained from fault injection campaigns and radiation experiments show that it is possible to increase the performance of a processor-based system up to 5,000 times by changing its architecture with a small impact in the cross section (increasing up to 8 times), and still increasing the Mean Workload Between Failures (MWBF) of the system.

Safety of High Speed Ground Transportation Systems : Analytical Methodology for Safety Validation of Computer Controlled Subsystems : Volume 2. Development of a Safety Validation Methodology

DOT National Transportation Integrated Search

1995-01-01

This report describes the development of a methodology designed to assure that a sufficiently high level of safety is achieved and maintained in computer-based systems which perform safety cortical functions in high-speed rail or magnetic levitation ...

Safety by design of printed multilayer materials intended for food packaging.

PubMed

Domeño, Celia; Aznar, Margarita; Nerín, Cristina; Isella, Francesca; Fedeli, Mauro; Bosetti, Osvaldo

2017-07-01

Printing inks are commonly used in multilayer plastics materials used for food packaging, and compounds present in inks can migrate to the food either by diffusion through the multilayers or because of set-off phenomena. To avoid this problem, the right design of the packaging is crucial. This paper studies the safety by design of multilayer materials. First, the migration from four different multilayers manufactured using polyethylene terephthalate (PET), aluminium (Al) and polyethylene (PE) was determined. The structural differences among materials such as the presence of inks or lacquer coatings as well as the differences in layers position allowed the study of a safety-by-design approach. Sixty-nine different compounds were detected and identified; 49 of them were not included in the positive list of Regulation EU/10/2011 or in Swiss legislation and 15 belong to Cramer class III, which means that they have a theoretical high toxicity. Some of the compounds related to ink composition were pyrene, a compound commercially used to make dyes and dye precursors and the antioxidant Irganox 1300. The application of external lacquers decreased the concentration of some migrants but also brought the potential for new migrants coming from its composition. A final risk assessment of the material allowed evaluating food safety for different food simulants and confirm it.

The Wireless Sensor Network (WSN) Based Coal Ash Impoundments Safety Monitoring System

NASA Astrophysics Data System (ADS)

Sun, E. J.; Nieto, A.; Zhang, X. K.

2017-01-01

Coal ash impoundments are inevitable production of the coal-fired power plants. All coal ash impoundments in North Carolina USA that tested for groundwater contamination are leaking toxic heavy metals and other pollutants. Coal ash impoundments are toxic sources of dangerous pollutants that pose a danger to human and environmental health if the toxins spread to adjacent surface waters and drinking water wells. Coal ash impoundments failures accidents resulted in serious water contamination along with toxic heavy metals. To improve the design and stability of coal ash impoundments, the Development of a Coal Ash Impoundment Safety Monitoring System (CAISM) was proposed based on the implementation of a wireless sensor network (WSN) with the ability to monitor the stability of coal ash impoundments, water level, and saturation levels on-demand and remotely. The monitoring system based on a robust Ad-hoc network could be adapted to different safety conditions.

A toolbox for safety instrumented system evaluation based on improved continuous-time Markov chain

NASA Astrophysics Data System (ADS)

Wardana, Awang N. I.; Kurniady, Rahman; Pambudi, Galih; Purnama, Jaka; Suryopratomo, Kutut

2017-08-01

Safety instrumented system (SIS) is designed to restore a plant into a safe condition when pre-hazardous event is occur. It has a vital role especially in process industries. A SIS shall be meet with safety requirement specifications. To confirm it, SIS shall be evaluated. Typically, the evaluation is calculated by hand. This paper presents a toolbox for SIS evaluation. It is developed based on improved continuous-time Markov chain. The toolbox supports to detailed approach of evaluation. This paper also illustrates an industrial application of the toolbox to evaluate arch burner safety system of primary reformer. The results of the case study demonstrates that the toolbox can be used to evaluate industrial SIS in detail and to plan the maintenance strategy.

Evaluation of interactive highway safety design model crash prediction tools for two-lane rural roads on Kansas Department of Transportation projects.

DOT National Transportation Integrated Search

2014-01-01

Historically, project-level decisions for the selection of highway features to promote safety were : based on either engineering judgment or adherence to accepted national guidance. These tools have allowed : highway designers to produce facilities t...

Program for developing and implementing a new approach to designing for fire safety in buildings

NASA Technical Reports Server (NTRS)

1975-01-01

The traditional method of providing for fire safety in buildings through reliance on codes and standards that prescribe specific measures to be taken in the design and construction of buildings to minimize the potential for a fire occurring and to protect property and life should a fire occur was evaluated. A new approach to designing for fire safety in buildings is outlined.

System Guidelines for EMC Safety-Critical Circuits: Design, Selection, and Margin Demonstration

NASA Technical Reports Server (NTRS)

Lawton, R. M.

1996-01-01

Demonstration of required safety margins on critical electrical/electronic circuits in large complex systems has become an implementation and cost problem. These margins are the difference between the activation level of the circuit and the electrical noise on the circuit in the actual operating environment. This document discusses the origin of the requirement and gives a detailed process flow for the identification of the system electromagnetic compatibility (EMC) critical circuit list. The process flow discusses the roles of engineering disciplines such as systems engineering, safety, and EMC. Design and analysis guidelines are provided to assist the designer in assuring the system design has a high probability of meeting the margin requirements. Examples of approaches used on actual programs (Skylab and Space Shuttle Solid Rocket Booster) are provided to show how variations of the approach can be used successfully.

A conceptual framework for the domain of evidence-based design.

PubMed

Ulrich, Roger S; Berry, Leonard L; Quan, Xiaobo; Parish, Janet Turner

2010-01-01

The physical facilities in which healthcare services are performed play an important role in the healing process. Evidence-based design in healthcare is a developing field of study that holds great promise for benefiting key stakeholders: patients, families, physicians, and nurses, as well as other healthcare staff and organizations. In this paper, the authors present and discuss a conceptual framework intended to capture the current domain of evidence-based design in healthcare. In this framework, the built environment is represented by nine design variable categories: audio environment, visual environment, safety enhancement, wayfinding system, sustainability, patient room, family support spaces, staff support spaces, and physician support spaces. Furthermore, a series of matrices is presented that indicates knowledge gaps concerning the relationship between specific healthcare facility design variable categories and participant and organizational outcomes. From this analysis, the authors identify fertile research opportunities from the perspectives of key stakeholders.

Nuclear safety

NASA Technical Reports Server (NTRS)

Buden, D.

1991-01-01

Topics dealing with nuclear safety are addressed which include the following: general safety requirements; safety design requirements; terrestrial safety; SP-100 Flight System key safety requirements; potential mission accidents and hazards; key safety features; ground operations; launch operations; flight operations; disposal; safety concerns; licensing; the nuclear engine for rocket vehicle application (NERVA) design philosophy; the NERVA flight safety program; and the NERVA safety plan.

Bovine thrombin safety reporting: an example of study design and publication bias.

PubMed

Crean, Sheila; Michels, Shannon L; Moschella, Kevin; Reynolds, Matthew W

2010-01-01

Bovine thrombin, a popular hemostat and sealant since 1945, has recently been subjected to clinical trial testing due to reformulations in 1998. We sought to compare adverse event rates of early observational studies with those of later interventional trials. A MEDLINE-based literature search in publications that report safety in bovine thrombin exposed surgical patients was extracted and reviewed. In 38 studies, about half were case reports and 31.5% were interventional trials. In case reports, 41% of authors reported severe coagulopathic adverse events. In contrast, whereas blood complications were common in large trials, no association of harm was established for bovine thrombin product exposure and/or immunization. In this review, later clinical trials failed to reproduce the common and severe coagulopathy predicted by earlier observational studies in bovine exposed patients. This example illustrates that perceptions of safety can change as a function of study design, even for a widely adopted, well established biologic such as thrombin. Caution must be exercised in interpreting evidence from observational studies alone.

Application of Framework for Integrating Safety, Security and Safeguards (3Ss) into the Design Of Used Nuclear Fuel Storage Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Badwan, Faris M.; Demuth, Scott F

Department of Energy’s Office of Nuclear Energy, Fuel Cycle Research and Development develops options to the current commercial fuel cycle management strategy to enable the safe, secure, economic, and sustainable expansion of nuclear energy while minimizing proliferation risks by conducting research and development focused on used nuclear fuel recycling and waste management to meet U.S. needs. Used nuclear fuel is currently stored onsite in either wet pools or in dry storage systems, with disposal envisioned in interim storage facility and, ultimately, in a deep-mined geologic repository. The safe management and disposition of used nuclear fuel and/or nuclear waste is amore » fundamental aspect of any nuclear fuel cycle. Integrating safety, security, and safeguards (3Ss) fully in the early stages of the design process for a new nuclear facility has the potential to effectively minimize safety, proliferation, and security risks. The 3Ss integration framework could become the new national and international norm and the standard process for designing future nuclear facilities. The purpose of this report is to develop a framework for integrating the safety, security and safeguards concept into the design of Used Nuclear Fuel Storage Facility (UNFSF). The primary focus is on integration of safeguards and security into the UNFSF based on the existing Nuclear Regulatory Commission (NRC) approach to addressing the safety/security interface (10 CFR 73.58 and Regulatory Guide 5.73) for nuclear power plants. The methodology used for adaptation of the NRC safety/security interface will be used as the basis for development of the safeguards /security interface and later will be used as the basis for development of safety and safeguards interface. Then this will complete the integration cycle of safety, security, and safeguards. The overall methodology for integration of 3Ss will be proposed, but only the integration of safeguards and security will be applied to the design

Reliability Based Geometric Design of Horizontal Circular Curves

NASA Astrophysics Data System (ADS)

Rajbongshi, Pabitra; Kalita, Kuldeep

2018-06-01

Geometric design of horizontal circular curve primarily involves with radius of the curve and stopping sight distance at the curve section. Minimum radius is decided based on lateral thrust exerted on the vehicles and the minimum stopping sight distance is provided to maintain the safety in longitudinal direction of vehicles. Available sight distance at site can be regulated by changing the radius and middle ordinate at the curve section. Both radius and sight distance depend on design speed. Speed of vehicles at any road section is a variable parameter and therefore, normally the 98th percentile speed is taken as the design speed. This work presents a probabilistic approach for evaluating stopping sight distance, considering the variability of all input parameters of sight distance. It is observed that the 98th percentile sight distance value is much lower than the sight distance corresponding to 98th percentile speed. The distribution of sight distance parameter is also studied and found to follow a lognormal distribution. Finally, the reliability based design charts are presented for both plain and hill regions, and considering the effect of lateral thrust.

Nature-based strategies for improving urban health and safety

Treesearch

Michelle C. Kondo; Eugenia C. South; Charles C. Branas

2015-01-01

Place-based programs are being noticed as key opportunities to prevent disease and promote public health and safety for populations at-large. As one key type of place-based intervention, nature-based and green space strategies can play an especially large role in improving health and safety for dwellers in urban environments such as US legacy cities that lack nature...

Risk-Based Explosive Safety Analysis

DTIC Science & Technology

2016-11-30

safety siting of energetic liquids and propellants can be greatly aided by the use of risk-based methodologies. The low probability of exposed...liquids or propellants . 15. SUBJECT TERMS N/A 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT 18. NUMBER OF PAGES 19a. NAME OF...of energetic liquids and propellants can be greatly aided by the use of risk-based methodologies. The low probability of exposed personnel and the

Improving safety culture through the health and safety organization: a case study.

PubMed

Nielsen, Kent J

2014-02-01

International research indicates that internal health and safety organizations (HSO) and health and safety committees (HSC) do not have the intended impact on companies' safety performance. The aim of this case study at an industrial plant was to test whether the HSO can improve company safety culture by creating more and better safety-related interactions both within the HSO and between HSO members and the shop-floor. A quasi-experimental single case study design based on action research with both quantitative and qualitative measures was used. Based on baseline mapping of safety culture and the efficiency of the HSO three developmental processes were started aimed at the HSC, the whole HSO, and the safety representatives, respectively. Results at follow-up indicated a marked improvement in HSO performance, interaction patterns concerning safety, safety culture indicators, and a changed trend in injury rates. These improvements are interpreted as cultural change because an organizational double-loop learning process leading to modification of the basic assumptions could be identified. The study provides evidence that the HSO can improve company safety culture by focusing on safety-related interactions. © 2013. Published by Elsevier Ltd and National Safety Council.

An evaluation of two conducted electrical weapons and two probe designs using a swine comparative cardiac safety model.

PubMed

Dawes, Donald Murray; Ho, Jeffrey D; Moore, Johanna C; Miner, James R

2013-09-01

Despite human laboratory and field studies that have demonstrated a reasonable safety profile for TASER brand conducted electrical weapons (CEW), the results of some swine studies and arrest related deaths temporal to the use of the CEWs continue to raise questions regarding cardiac safety. TASER International, Inc., has released a new CEW, the TASER X2, touted to have a better safety profile than its long-standing predecessor, the TASER X26. We have developed a model to assess the relative cardiac safety of CEWs and used it to compare the TASER X2 and the TASER X26. This safety model was also used to assess the relative safety of an experimental probe design as compared to the standard steel probe. Our results suggest that the TASER X2 has an improved safety margin over the TASER X26. The new probe design also has promise for enhanced cardiac safety, although may have some disadvantages when compared to the existing design which would make field use impractical.

Non-reporting of work injuries and aspects of jobsite safety climate and behavioral-based safety elements among carpenters in Washington State.

PubMed

Lipscomb, Hester J; Schoenfisch, Ashley L; Cameron, Wilfrid

2015-04-01

Declining work injury rates may reflect safer work conditions as well as under-reporting. Union carpenters were invited to participate in a mailed, cross-sectional survey designed to capture information about injury reporting practices. Prevalence of non-reporting and fear of repercussions for reporting were compared across exposure to behavioral-based safety elements and three domains of the Nordic Safety Climate Questionnaire (NOSACQ-50). The majority (>75%) of the 1,155 participants felt they could report work-related injuries to their supervisor without fear of retribution, and most felt that the majority of injuries on their jobsites got reported. However, nearly half indicated it was best not to report minor injuries, and felt pressures to use their private insurance for work injury care. The prevalence of non-reporting and fear of reporting increased markedly with poorer measures of management safety justice (NOSACQ-50). Formal and informal policies and practices on jobsites likely influence injury reporting. © 2015 Wiley Periodicals, Inc.

Intranet-based safety documentation in management of major hazards and occupational health and safety.

PubMed

Leino, Antti

2002-01-01

In the European Union, Council Directive 96/82/EC requires operators producing, using, or handling significant amounts of dangerous substances to improve their safety management systems in order to better manage the major accident potentials deriving from human error. A new safety management system for the Viikinmäki wastewater treatment plant in Helsinki, Finland, was implemented in this study. The system was designed to comply with both the new safety liabilities and the requirements of OHSAS 18001 (British Standards Institute, 1999). During the implementation phase experiences were gathered from the development processes in this small organisation. The complete documentation was placed in the intranet of the plant. Hyperlinks between documents were created to ensure convenience of use. Documentation was made accessible for all workers from every workstation.

Using micro-simulation to investigate the safety impacts of transit design alternatives at signalized intersections.

PubMed

Li, Lu; Persaud, Bhagwant; Shalaby, Amer

2017-03-01

This study investigates the use of crash prediction models and micro-simulation to develop an effective surrogate safety assessment measure at the intersection level. With the use of these tools, hypothetical scenarios can be developed and explored to evaluate the safety impacts of design alternatives in a controlled environment, in which factors not directly associated with the design alternatives can be fixed. Micro-simulation models are developed, calibrated, and validated. Traffic conflicts in the micro-simulation models are estimated and linked with observed crash frequency, which greatly alleviates the lengthy time needed to collect sufficient crash data for evaluating alternatives, due to the rare and infrequent nature of crash events. A set of generalized linear models with negative binomial error structure is developed to correlate the simulated conflicts with the observed crash frequency in Toronto, Ontario, Canada. Crash prediction models are also developed for crashes of different impact types and for transit-involved crashes. The resulting statistical significance and the goodness-of-fit of the models suggest adequate predictive ability. Based on the established correlation between simulated conflicts and observed crashes, scenarios are developed in the micro-simulation models to investigate the safety effects of individual transit line elements by making hypothetical modifications to such elements and estimating changes in crash frequency from the resulting changes in conflicts. The findings imply that the existing transit signal priority schemes can have a negative effect on safety performance, and that the existing near-side stop positioning and streetcar transit type can be safer at their current state than if they were to be replaced by their respective counterparts. Copyright © 2017 Elsevier Ltd. All rights reserved.

49 CFR Appendix F to Part 229 - Recommended Practices for Design and Safety Analysis

Code of Federal Regulations, 2014 CFR

2014-10-01

... expected order of use; (v) Group similar controls together; (vi) Design for high stimulus-response compatibility (geometric and conceptual); (vii) Design safety-critical controls to require more than one... description of all backup methods of operation; and (s) The configuration/revision control measures designed...

49 CFR Appendix F to Part 229 - Recommended Practices for Design and Safety Analysis

Code of Federal Regulations, 2012 CFR

2012-10-01

... expected order of use; (v) Group similar controls together; (vi) Design for high stimulus-response compatibility (geometric and conceptual); (vii) Design safety-critical controls to require more than one... description of all backup methods of operation; and (s) The configuration/revision control measures designed...

49 CFR Appendix F to Part 229 - Recommended Practices for Design and Safety Analysis

Code of Federal Regulations, 2013 CFR

2013-10-01

... expected order of use; (v) Group similar controls together; (vi) Design for high stimulus-response compatibility (geometric and conceptual); (vii) Design safety-critical controls to require more than one... description of all backup methods of operation; and (s) The configuration/revision control measures designed...

The role of leader influence tactics and safety climate in engaging employees' safety participation.

PubMed

Clarke, Sharon; Ward, Katie

2006-10-01

This study examines the effect of leader influence tactics on employee safety participation in a U.K.-based manufacturing organization, examining the role of safety climate as a mediator. Structural equation modeling showed that leader influence tactics associated with a transformational leadership style had significant relationships with safety participation that were partially mediated by the safety climate (consultation) or fully mediated by the safety climate (inspirational appeals). In addition, leader influence tactics associated with a transactional leadership style had significant relationships with safety participation: rational persuasion (partially mediated by safety climate) and coalition tactics (direct effect). Thus, leaders may encourage safety participation using a combination of influence tactics, based on rational arguments, involvement in decision making, and generating enthusiasm for safety. The influence of building trust in managers is discussed as an underlying mechanism in this relationship. Practical implications are highlighted, including the design of leadership development programs, which may be particularly suited to high-reliability organizations.

Implementation and evaluation of a patient safety course in a problem-based learning program.

PubMed

Eltony, Sarah Ahmed; El-Sayed, Nahla Hassan; El-Araby, Shimaa El-Sayed; Kassab, Salah Eldin

2017-01-01

Since the development of the WHO patient safety curriculum guide, there has been insufficient reporting regarding the implementation and evaluation of patient safety courses in undergraduate problem-based learning (PBL) programs. This study is designed to implement a patient safety course to undergraduate students in a PBL medical school and evaluate this course by examining its effects on students' knowledge and satisfaction. The target population included year 6 medical students (n = 71) at the Faculty of Medicine, Suez Canal University in Egypt. A 3-day course was conducted addressing three principal topics from the WHO patient safety curriculum guide. The methods of instruction included reflection on students' past experiences, PBL case discussions, and tasks with incident report cards. A pre- and post-test design was used to assess the effect of the course on students' knowledge of inpatient safety topics. Furthermore, students' perceptions of the quality of the course were assessed through a structured self-administered course evaluation questionnaire. The results of the pre- and post-test demonstrated a significant increase (P < 0.05) in the students' mean multiple choice question (MCQ) scores. The MCQ scores for "what is patient safety" topic increased by 50% (P < 0.01). Similarly, the MCQ scores for the "infection control" topic increased by 39% (P < 0.01), and scores for the "medication safety" topic increased by 45% (P < 0.01). The majority of students perceived the different aspects of the course positively, including the structure and introduction of the course (75%) and the communication skills (83.2%) and teamwork skills they had developed (94.4%). The findings of the incident report cards indicated that 46.7% of the students perceived that incidents most commonly take place in the emergency room while only 6.7% in the outpatient clinic. This patient safety education program within a PBL curriculum is positively perceived by students. Furthermore

Beyond usability: designing effective technology implementation systems to promote patient safety.

PubMed

Karsh, B-T

2004-10-01

Evidence is emerging that certain technologies such as computerized provider order entry may reduce the likelihood of patient harm. However, many technologies that should reduce medical errors have been abandoned because of problems with their design, their impact on workflow, and general dissatisfaction with them by end users. Patient safety researchers have therefore looked to human factors engineering for guidance on how to design technologies to be usable (easy to use) and useful (improving job performance, efficiency, and/or quality). While this is a necessary step towards improving the likelihood of end user satisfaction, it is still not sufficient. Human factors engineering research has shown that the manner in which technologies are implemented also needs to be designed carefully if benefits are to be realized. This paper reviews the theoretical knowledge on what leads to successful technology implementation and how this can be translated into specifically designed processes for successful technology change. The literature on diffusion of innovations, technology acceptance, organisational justice, participative decision making, and organisational change is reviewed and strategies for promoting successful implementation are provided. Given the rapid and ever increasing pace of technology implementation in health care, it is critical for the science of technology implementation to be understood and incorporated into efforts to improve patient safety.

Evaluation of Geometric Design Needs of Freeway Systems Based on Traffic and Geometric Data

DOT National Transportation Integrated Search

2013-10-20

In Las Vegas, Nevada, the increased traffic competes for the limited spaces available in the freeway system and thus reduces safety performance. This study identified geometric design issues on freeway systems in Las Vegas, Nevada, based on available...

Risk-based Spacecraft Fire Safety Experiments

NASA Technical Reports Server (NTRS)

Apostolakis, G.; Catton, I.; Issacci, F.; Paulos, T.; Jones, S.; Paxton, K.; Paul, M.

1992-01-01

Viewgraphs on risk-based spacecraft fire safety experiments are presented. Spacecraft fire risk can never be reduced to a zero probability. Probabilistic risk assessment is a tool to reduce risk to an acceptable level.

Understanding the relationship between safety investment and safety performance of construction projects through agent-based modeling.

PubMed

Lu, Miaojia; Cheung, Clara Man; Li, Heng; Hsu, Shu-Chien

2016-09-01

The construction industry in Hong Kong increased its safety investment by 300% in the past two decades; however, its accident rate has plateaued to around 50% for one decade. Against this backdrop, researchers have found inconclusive results on the causal relationship between safety investment and safety performance. Using agent-based modeling, this study takes an unconventional bottom-up approach to study safety performance on a construction site as an outcome of a complex system defined by interactions among a worksite, individual construction workers, and different safety investments. Instead of focusing on finding the absolute relationship between safety investment and safety performance, this study contributes to providing a practical framework to investigate how different safety investments interacting with different parameters such as human and environmental factors could affect safety performance. As a result, we could identify cost-effective safety investments under different construction scenarios for delivering optimal safety performance. Copyright © 2016 Elsevier Ltd. All rights reserved.

[Safety monitoring of cell-based medicinal products (CBMPs)].

PubMed

Funk, Markus B; Frech, Marion; Spranger, Robert; Keller-Stanislawski, Brigitte

2015-11-01

Cell-based medicinal products (CBMPs), a category of advanced-therapy medicinal products (ATMPs), are authorised for the European market by the European Commission by means of the centralized marketing authorisation. By conforming to the German Medicinal Products Act (Sec. 4b AMG), national authorisation can be granted by the Paul-Ehrlich-Institut in Germany exclusively for ATMPs not based on a routine manufacturing procedure. In both procedures, quality, efficacy, and safety are evaluated and the risk-benefit balance is assessed. For the centralised procedure, mainly controlled clinical trial data must be submitted, whereas the requirements for national procedures could be modified corresponding to the stage of development of the ATMP. After marketing authorization, the marketing authorization/license holder is obligated to report all serious adverse reactions to the competent authority and to provide periodic safety update reports. If necessary, post-authorization safety studies could be imposed. On the basis of these regulatory measures, the safety of advanced therapies can be monitored and improved.

Interrelation Between Safety Factors and Reliability

NASA Technical Reports Server (NTRS)

Elishakoff, Isaac; Chamis, Christos C. (Technical Monitor)

2001-01-01

An evaluation was performed to establish relationships between safety factors and reliability relationships. Results obtained show that the use of the safety factor is not contradictory to the employment of the probabilistic methods. In many cases the safety factors can be directly expressed by the required reliability levels. However, there is a major difference that must be emphasized: whereas the safety factors are allocated in an ad hoc manner, the probabilistic approach offers a unified mathematical framework. The establishment of the interrelation between the concepts opens an avenue to specify safety factors based on reliability. In cases where there are several forms of failure, then the allocation of safety factors should he based on having the same reliability associated with each failure mode. This immediately suggests that by the probabilistic methods the existing over-design or under-design can be eliminated. The report includes three parts: Part 1-Random Actual Stress and Deterministic Yield Stress; Part 2-Deterministic Actual Stress and Random Yield Stress; Part 3-Both Actual Stress and Yield Stress Are Random.

Deep Borehole Disposal Safety Analysis.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Freeze, Geoffrey A.; Stein, Emily; Price, Laura L.

This report presents a preliminary safety analysis for the deep borehole disposal (DBD) concept, using a safety case framework. A safety case is an integrated collection of qualitative and quantitative arguments, evidence, and analyses that substantiate the safety, and the level of confidence in the safety, of a geologic repository. This safety case framework for DBD follows the outline of the elements of a safety case, and identifies the types of information that will be required to satisfy these elements. At this very preliminary phase of development, the DBD safety case focuses on the generic feasibility of the DBD concept.more » It is based on potential system designs, waste forms, engineering, and geologic conditions; however, no specific site or regulatory framework exists. It will progress to a site-specific safety case as the DBD concept advances into a site-specific phase, progressing through consent-based site selection and site investigation and characterization.« less

Flexible Control of Safety Margins for Action Based on Environmental Variability.

PubMed

Hadjiosif, Alkis M; Smith, Maurice A

2015-06-17

To reduce the risk of slip, grip force (GF) control includes a safety margin above the force level ordinarily sufficient for the expected load force (LF) dynamics. The current view is that this safety margin is based on the expected LF dynamics, amounting to a static safety factor like that often used in engineering design. More efficient control could be achieved, however, if the motor system reduces the safety margin when LF variability is low and increases it when this variability is high. Here we show that this is indeed the case by demonstrating that the human motor system sizes the GF safety margin in proportion to an internal estimate of LF variability to maintain a fixed statistical confidence against slip. In contrast to current models of GF control that neglect the variability of LF dynamics, we demonstrate that GF is threefold more sensitive to the SD than the expected value of LF dynamics, in line with the maintenance of a 3-sigma confidence level. We then show that a computational model of GF control that includes a variability-driven safety margin predicts highly asymmetric GF adaptation between increases versus decreases in load. We find clear experimental evidence for this asymmetry and show that it explains previously reported differences in how rapidly GFs and manipulatory forces adapt. This model further predicts bizarre nonmonotonic shapes for GF learning curves, which are faithfully borne out in our experimental data. Our findings establish a new role for environmental variability in the control of action. Copyright © 2015 the authors 0270-6474/15/359106-16$15.00/0.

Evaluation of interactive highway safety design model crash prediction tools for two-lane rural roads on Kansas Department of Transportation projects : [technical summary].

DOT National Transportation Integrated Search

2014-01-01

Historically, project-level decisions for the selection of highway features to promote safety were based on either engineering judgment or adherence to accepted national guidance. These tools have allowed highway designers to produce facilities that ...

Office-based surgery: embracing patient safety strategies.

PubMed

Shapiro, Fred E; Punwani, Nathan; Urman, Richard D

2013-01-01

Office-based surgery continues to grow as more procedures are being performed in the outpatient setting. With this exponential growth, there is an increasing emphasis on safe and effective patient care. Current research shows both gaps in safety and opportunities for improvement. Practice managers, clinicians, and other personnel should be cognizant that office procedures are coming under intense regulatory scrutiny. Effective strategies to maintain quality and patient safety include the use of checklists, obtaining office accreditation, encouraging board-certification and proper credentialing of proceduralists, and appropriate patient and procedure selection. There is increasing regulation of ambulatory surgery on state and national levels that will likely affect the financial and care quality aspects of office-based practice. Socioeconomic and political forces will continue to shape the future of office-based surgery.

SP-100 power system conceptual design for lunar base applications

NASA Technical Reports Server (NTRS)

Mason, Lee S.; Bloomfield, Harvey S.; Hainley, Donald C.

1989-01-01

A conceptual design is presented for a nuclear power system utilizing an SP-100 reactor and multiple Stirling cycle engines for operation on the lunar surface. Based on the results of this study, it was concluded that this power plant could be a viable option for an evolutionary lunar base. The design concept consists of a 2500 kWt (kilowatt thermal) SP-100 reactor coupled to eight free-piston Stirling engines. Two of the engines are held in reserve to provide conversion system redundancy. The remaining engines operate at 91.7 percent of their rated capacity of 150 kWe. The design power level for this system is 825 kWe. Each engine has a pumped heat-rejection loop connected to a heat pipe radiator. Power system performance, sizing, layout configurations, shielding options, and transmission line characteristics are described. System components and integration options are compared for safety, high performance, low mass, and ease of assembly. The power plant was integrated with a proposed human lunar base concept to ensure mission compatibility. This study should be considered a preliminary investigation; further studies are planned to investigate the effect of different technologies on this baseline design.

Safety analysis of the new synchronized and milwaukee B interchanges in comparison to existing designs.

PubMed

Molan, Amirarsalan Mehrara; Hummer, Joseph E

2017-12-01

Interchanges have high crash rates and large impacts on traffic operations. The main objective of this research is to analyze the safety performance of two new interchanges, the synchronized interchange and the Milwaukee B interchange. The primary method of study was microscopic simulation modeling using the Surrogate Safety Assessment Model (SSAM) program to estimate the quantity and type of conflicting interactions in each interchange. A comprehensive series of simulation scenarios were considered to include different conditions of traffic volumes, traffic turning ratios, traffic distribution, and heavy vehicles percentages. Afterward, outcomes were analyzed with two-way Analyses of Variance (ANOVAs) to compare the mean values of conflicts. Based on the results, the diverging diamond interchange (DDI) and Milwaukee B were the safest designs regarding observed conflicting interactions in the simulation models; however, the DDI did not seem as reliable from the viewpoint of wrong way movements. The new synchronized interchange, the parclo B, and the Milwaukee A (an existing interchange in Milwaukee, WI) showed the same rate of conflicts. The synchronized interchange may be advantageous because it was estimated to reduce the severity of crashes due to fewer crossing conflicts, a lower speed of conflicts, and a higher time to collision. The conventional diamond was the most dangerous design based on our measures. The DDI and the synchronized interchange look like plausible substitutes for reconstructing an unsafe diamond interchange due to the similarities in their required space. Copyright © 2017 Elsevier Ltd. All rights reserved.

A hybrid multi-objective imperialist competitive algorithm and Monte Carlo method for robust safety design of a rail vehicle

NASA Astrophysics Data System (ADS)

Nejlaoui, Mohamed; Houidi, Ajmi; Affi, Zouhaier; Romdhane, Lotfi

2017-10-01

This paper deals with the robust safety design optimization of a rail vehicle system moving in short radius curved tracks. A combined multi-objective imperialist competitive algorithm and Monte Carlo method is developed and used for the robust multi-objective optimization of the rail vehicle system. This robust optimization of rail vehicle safety considers simultaneously the derailment angle and its standard deviation where the design parameters uncertainties are considered. The obtained results showed that the robust design reduces significantly the sensitivity of the rail vehicle safety to the design parameters uncertainties compared to the determinist one and to the literature results.

Recent findings relating to firefighter safety zones

Treesearch

Bret Butler; Russ Parsons; William Mell

2015-01-01

Designation of safety zones is a primary duty of all wildland firefighters. Unfortunately, information regarding what constitutes an adequate safety zone is inadequately defined. Measurements of energy release from wildland fires have been used to develop an empirically based safety zone guideline. The basis for this work is described here.

Safety and core design of large liquid-metal cooled fast breeder reactors

NASA Astrophysics Data System (ADS)

Qvist, Staffan Alexander

In light of the scientific evidence for changes in the climate caused by greenhouse-gas emissions from human activities, the world is in ever more desperate need of new, inexhaustible, safe and clean primary energy sources. A viable solution to this problem is the widespread adoption of nuclear breeder reactor technology. Innovative breeder reactor concepts using liquid-metal coolants such as sodium or lead will be able to utilize the waste produced by the current light water reactor fuel cycle to power the entire world for several centuries to come. Breed & burn (B&B) type fast reactor cores can unlock the energy potential of readily available fertile material such as depleted uranium without the need for chemical reprocessing. Using B&B technology, nuclear waste generation, uranium mining needs and proliferation concerns can be greatly reduced, and after a transitional period, enrichment facilities may no longer be needed. In this dissertation, new passively operating safety systems for fast reactors cores are presented. New analysis and optimization methods for B&B core design have been developed, along with a comprehensive computer code that couples neutronics, thermal-hydraulics and structural mechanics and enables a completely automated and optimized fast reactor core design process. In addition, an experiment that expands the knowledge-base of corrosion issues of lead-based coolants in nuclear reactors was designed and built. The motivation behind the work presented in this thesis is to help facilitate the widespread adoption of safe and efficient fast reactor technology.

Some Challenges in the Design of Human-Automation Interaction for Safety-Critical Systems

NASA Technical Reports Server (NTRS)

Feary, Michael S.; Roth, Emilie

2014-01-01

Increasing amounts of automation are being introduced to safety-critical domains. While the introduction of automation has led to an overall increase in reliability and improved safety, it has also introduced a class of failure modes, and new challenges in risk assessment for the new systems, particularly in the assessment of rare events resulting from complex inter-related factors. Designing successful human-automation systems is challenging, and the challenges go beyond good interface development (e.g., Roth, Malin, & Schreckenghost 1997; Christoffersen & Woods, 2002). Human-automation design is particularly challenging when the underlying automation technology generates behavior that is difficult for the user to anticipate or understand. These challenges have been recognized in several safety-critical domains, and have resulted in increased efforts to develop training, procedures, regulations and guidance material (CAST, 2008, IAEA, 2001, FAA, 2013, ICAO, 2012). This paper points to the continuing need for new methods to describe and characterize the operational environment within which new automation concepts are being presented. We will describe challenges to the successful development and evaluation of human-automation systems in safety-critical domains, and describe some approaches that could be used to address these challenges. We will draw from experience with the aviation, spaceflight and nuclear power domains.

Software system safety

NASA Technical Reports Server (NTRS)

Uber, James G.

1988-01-01

Software itself is not hazardous, but since software and hardware share common interfaces there is an opportunity for software to create hazards. Further, these software systems are complex, and proven methods for the design, analysis, and measurement of software safety are not yet available. Some past software failures, future NASA software trends, software engineering methods, and tools and techniques for various software safety analyses are reviewed. Recommendations to NASA are made based on this review.

Cascade Distillation System Design for Safety and Mission Assurance

NASA Technical Reports Server (NTRS)

Sargusingh, Miriam J.; Callahan, Michael R.

2015-01-01

Per the NASA Human Health, Life Support and Habitation System Technology Area 06 report "crewed missions venturing beyond Low-Earth Orbit (LEO) will require technologies with improved reliability, reduced mass, self-sufficiency, and minimal logistical needs as an emergency or quick-return option will not be feasible." To meet this need, the development team of the second generation Cascade Distillation System (CDS 2.0) opted a development approach that explicitely incorporate consideration of safety, mission assurance, and autonomy. The CDS 2.0 prelimnary design focused on establishing a functional baseline that meets the CDS core capabilities and performance. The critical design phase is now focused on incorporating features through a deliberative process of establishing the systems failure modes and effects, identifying mitigative strategies, and evaluating the merit of the proposed actions through analysis and test. This paper details results of this effort on the CDS 2.0 design.

Cascade Distillation System Design for Safety and Mission Assurance

NASA Technical Reports Server (NTRS)

Sarguisingh, Miriam; Callahan, Michael R.; Okon, Shira

2015-01-01

Per the NASA Human Health, Life Support and Habitation System Technology Area 06 report "crewed missions venturing beyond Low-Earth Orbit (LEO) will require technologies with improved reliability, reduced mass, self-sufficiency, and minimal logistical needs as an emergency or quick-return option will not be feasible".1 To meet this need, the development team of the second generation Cascade Distillation System (CDS 2.0) chose a development approach that explicitly incorporate consideration of safety, mission assurance, and autonomy. The CDS 2.0 preliminary design focused on establishing a functional baseline that meets the CDS core capabilities and performance. The critical design phase is now focused on incorporating features through a deliberative process of establishing the systems failure modes and effects, identifying mitigation strategies, and evaluating the merit of the proposed actions through analysis and test. This paper details results of this effort on the CDS 2.0 design.

Exploring the role of emotional intelligence in behavior-based safety coaching.

PubMed

Wiegand, Douglas M

2007-01-01

Safety coaching is an applied behavior analysis technique that involves interpersonal interaction to understand and manipulate environmental conditions that are directing (i.e., antecedent to) and motivating (i.e., consequences of) safety-related behavior. A safety coach must be skilled in interacting with others so as to understand their perspectives, communicate a point clearly, and be persuasive with behavior-based feedback. This article discusses the evidence-based "ability model" of emotional intelligence and its relevance to the interpersonal aspect of the safety coaching process. Emotional intelligence has potential for improving safety-related efforts and other aspects of individuals' work and personal lives. Safety researchers and practitioners are therefore encouraged to gain an understanding of emotional intelligence and conduct and support research applying this construct toward injury prevention.

Analysis of School Food Safety Programs Based on HACCP Principles

ERIC Educational Resources Information Center

Roberts, Kevin R.; Sauer, Kevin; Sneed, Jeannie; Kwon, Junehee; Olds, David; Cole, Kerri; Shanklin, Carol

2014-01-01

Purpose/Objectives: The purpose of this study was to determine how school districts have implemented food safety programs based on HACCP principles. Specific objectives included: (1) Evaluate how schools are implementing components of food safety programs; and (2) Determine foodservice employees food-handling practices related to food safety.…

Patient safety and infection control: bases for curricular integration.

PubMed

Silva, Andréa Mara Bernardes da; Bim, Lucas Lazarini; Bim, Felipe Lazarini; Sousa, Alvaro Francisco Lopes; Domingues, Pedro Castania Amadio; Nicolussi, Adriana Cristina; Andrade, Denise de

2018-05-01

To analyze curricular integration between teaching of patient safety and good infection prevention and control practices. Integrative review, designed to answer the question: "How does curricular integration of content about 'patient safety teaching' and content about 'infection prevention and control practices' occur in undergraduate courses in the health field?". The following databases were searched for primary studies: CINAHL, LILACS, ScienceDirect, Web of Science, Scopus, Europe PMC and MEDLINE. The final sample consisted of 13 studies. After content analysis, primary studies were grouped into two subject categories: "Innovative teaching practices" and "Curricular evaluation. Patient safety related to infection prevention and control practices is present in the curriculum of health undergraduate courses, but is not coordinated with other themes, is taught sporadically, and focuses mainly on hand hygiene.

An image-based method to measure all-terrain vehicle dimensions for engineering safety purposes.

PubMed

Jennissen, Charles A; Miller, Nathan S; Tang, Kaiyang; Denning, Gerene M

2014-04-01

All-terrain vehicle (ATV) crashes are a serious public health and safety concern. Engineering approaches that address ATV injury prevention are critically needed. Avenues to pursue include evidence-based seat design that decreases risky behaviours, such as carrying passengers and operation of adult-size vehicles by children. The goal of this study was to create and validate an image-based method to measure ATV seat length and placement. Publicly available ATV images were downloaded. Adobe Photoshop was then used to generate a vertical grid through the centre of the vehicle, to define the grid scale using the manufacturer's reported wheelbase, and to determine seat length and placement relative to the front and rear axles using this scale. Images that yielded a difference greater than 5% between the calculated and the manufacturer's reported ATV lengths were excluded from further analysis. For the 77 images that met inclusion criteria, the mean±SD for the difference in calculated versus reported vehicle length was 1.8%±1.2%. The Pearson correlation coefficient for comparing image-based seat lengths determined by two independent measurers (20 models) and image-based lengths versus lengths measured at dealerships (12 models) were 0.95 and 0.96, respectively. The image-based method provides accurate and reproducible results for determining ATV measurements, including seat length and placement. This method greatly expands the number of ATV models that can be studied, and may be generalisable to other motor vehicle types. These measurements can be used to guide engineering approaches that improve ATV safety design.

Design Guidance for Computer-Based Procedures for Field Workers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oxstrand, Johanna; Le Blanc, Katya; Bly, Aaron

Nearly all activities that involve human interaction with nuclear power plant systems are guided by procedures, instructions, or checklists. Paper-based procedures (PBPs) currently used by most utilities have a demonstrated history of ensuring safety; however, improving procedure use could yield significant savings in increased efficiency, as well as improved safety through human performance gains. The nuclear industry is constantly trying to find ways to decrease human error rates, especially human error rates associated with procedure use. As a step toward the goal of improving field workers’ procedure use and adherence and hence improve human performance and overall system reliability, themore » U.S. Department of Energy Light Water Reactor Sustainability (LWRS) Program researchers, together with the nuclear industry, have been investigating the possibility and feasibility of replacing current paper-based procedures with computer-based procedures (CBPs). PBPs have ensured safe operation of plants for decades, but limitations in paper-based systems do not allow them to reach the full potential for procedures to prevent human errors. The environment in a nuclear power plant is constantly changing, depending on current plant status and operating mode. PBPs, which are static by nature, are being applied to a constantly changing context. This constraint often results in PBPs that are written in a manner that is intended to cover many potential operating scenarios. Hence, the procedure layout forces the operator to search through a large amount of irrelevant information to locate the pieces of information relevant for the task and situation at hand, which has potential consequences of taking up valuable time when operators must be responding to the situation, and potentially leading operators down an incorrect response path. Other challenges related to use of PBPs are management of multiple procedures, place-keeping, finding the correct procedure for a task, and

The Penn State Safety Floor: Part I--Design parameters associated with walking deflections.

PubMed

Casalena, J A; Ovaert, T C; Cavanagh, P R; Streit, D A

1998-08-01

A new flooring system has been developed to reduce peak impact forces to the hips when humans fall. The new safety floor is designed to remain relatively rigid under normal walking conditions, but to deform elastically when impacted during a fall. Design objectives included minimizing peak force experienced by the femur during a fall-induced impact, while maintaining a maximum of 2 mm of floor deflection during walking. Finite Element Models (FEMs) were developed to capture the complex dynamics of impact response between two deformable bodies. Validation of the finite element models included analytical calculations of theoretical buckling column response, experimental quasi-static loading of full-scale flooring prototypes, and flooring response during walking trials. Finite Element Method results compared well with theoretical and experimental data. Both finite element and experimental data suggest that the proposed safety floor can effectively meet the design goal of 2 mm maximum deflection during walking, while effectively reducing impact forces during a fall.

Assuring Rural Hospital Patient Safety: What Should Be the Priorities?

ERIC Educational Resources Information Center

Coburn, Andrew F.; Wakefield, Mary; Casey, Michelle; Moscovice, Ira; Payne, Susan; Loux, Stephenie

2004-01-01

Context: Since reports on patient safety were issued by the Institute of Medicine, a number of interventions have been recommended and standards designed to improve hospital patient safety, including the Leapfrog, evidence-based safety standards. These standards are based on research conducted largely in urban hospitals, and it may not be possible…

Medication Safety During Pregnancy: Improving Evidence-Based Practice.

PubMed

Sinclair, Susan M; Miller, Richard K; Chambers, Christina; Cooper, Elizabeth M

2016-01-01

Nearly 90% of women in the United States have taken medications during pregnancy. Medication exposures during pregnancy can result in adverse pregnancy and neonatal outcomes including birth defects, fetal loss, intrauterine growth restriction, prematurity, and longer-term neurodevelopmental outcomes. Advising pregnant women about the safety of medication use during pregnancy is complicated by a lack of data necessary to engage the woman in an informed discussion. Routinely, health care providers turn to the package insert, yet this information can be incomplete and can be based entirely on animal studies. Often, adequate safety data are not available. In a busy clinical setting, health care providers need to be able to quickly locate the most up-to-date information in order to counsel pregnant women concerned about medication exposure. Deciding where to locate the best available information is difficult, particularly when the needed information does not exist. Pregnancy registries are initiated to obtain more data about the safety of specific medication exposures during pregnancy; however, these studies are slow to produce meaningful information, and when they do, the information may not be readily available in a published form. Health care providers have valuable data in their everyday practice that can expand the knowledge base about medication safety during pregnancy. This review aims to discuss the limitations of the package insert regarding medication safety during pregnancy, highlight additional resources available to health care providers to inform practice, and communicate the importance of pregnancy registries for expanding knowledge about medication safety during pregnancy. © 2016 by the American College of Nurse-Midwives.

Effects of auditing patient safety in hospital care: design of a mixed-method evaluation

PubMed Central

2013-01-01

Background Auditing of patient safety aims at early detection of risks of adverse events and is intended to encourage the continuous improvement of patient safety. The auditing should be an independent, objective assurance and consulting system. Auditing helps an organisation accomplish its objectives by bringing a systematic, disciplined approach to evaluating and improving the effectiveness of risk management, control, and governance. Audits are broadly conducted in hospitals, but little is known about their effects on the behaviour of healthcare professionals and patient safety outcomes. This study was initiated to evaluate the effects of patient safety auditing in hospital care and to explore the processes and mechanisms underlying these effects. Methods and design Our study aims to evaluate an audit system to monitor and improve patient safety in a hospital setting. We are using a mixed-method evaluation with a before-and-after study design in eight departments of one university hospital in the period October 2011–July 2014. We measure several outcomes 3 months before the audit and 15 months after the audit. The primary outcomes are adverse events and complications. The secondary outcomes are experiences of patients, the standardised mortality ratio, prolonged hospital stay, patient safety culture, and team climate. We use medical record reviews, questionnaires, hospital administrative data, and observations to assess the outcomes. A process evaluation will be used to find out which components of internal auditing determine the effects. Discussion We report a study protocol of an effect and process evaluation to determine whether auditing improves patient safety in hospital care. Because auditing is a complex intervention targeted on several levels, we are using a combination of methods to collect qualitative and quantitative data about patient safety at the patient, professional, and department levels. This study is relevant for hospitals that want to

Tower Shielding Reactor II design and operation report: Vol. 2. Safety Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holland, L. B.; Kolb, J. O.

1970-01-01

Information on the Tower Shielding Reactor II is contained in the TSR-II Design and Operation Report and in the Tower Shielding Facility Manual. The TSR-II Design and Operating Report consists of three volumes. Volume 1 is Descriptions of the Tower Shielding Reactor II and Facility; Volume 2 is Safety analysis of the Tower Shielding Reactor II; and Volume 3 is the Assembly and Testing of the Tower Shielding Reactor II Control Mechanism Housing.

The potential application of behavior-based safety in the trucking industry

DOT National Transportation Integrated Search

2000-04-01

Behavior-based safety (BBS) is a set of methods to improve safety performance in the workplace by engaging workers in the improvement process, identifying critical safety behaviors, performing observations to gather data, providing feedback to encour...

A mediation model linking dispatcher leadership and work ownership with safety climate as predictors of truck driver safety performance.

PubMed

Zohar, Dov; Huang, Yueng-hsiang; Lee, Jin; Robertson, Michelle

2014-01-01

The study was designed to test the effect of safety climate on safety behavior among lone employees whose work environment promotes individual rather than consensual or shared climate perceptions. The paper presents a mediation path model linking psychological (individual-level) safety climate antecedents and consequences as predictors of driving safety of long-haul truck drivers. Climate antecedents included dispatcher (distant) leadership and driver work ownership, two contextual attributes of lone work, whereas its proximal consequence included driving safety. Using a prospective design, safety outcomes, consisting of hard-braking frequency (i.e. traffic near-miss events) were collected six months after survey completion, using GPS-based truck deceleration data. Results supported the hypothesized model, indicating that distant leadership style and work ownership promote psychological safety climate perceptions, with subsequent prediction of hard-braking events mediated by driving safety. Theoretical and practical implications for studying safety climate among lone workers in general and professional drivers in particular are discussed. Copyright © 2013 Elsevier Ltd. All rights reserved.

Behavior based safety. A different way of looking at an old problem.

PubMed

Haney, L; Anderson, M

1999-09-01

1. The occupational and environmental health nurse role in behavioral safety initiatives can very to include: serving as a leader, change agent, collaborator with safety professionals, consultant, team participant, educator, coach, and supporter to employees and management. 2. Behavior based safety and health initiatives add to existing knowledge and techniques for improving the health and safety of workers. 3. Behavior based safety relies on employee involvement and places a strong emphasis on observation, measurement, feedback, positive reinforcement, and evaluation. It focuses on identification of system improvements and prevention.

Development of a nursing handoff tool: a web-based application to enhance patient safety.

PubMed

Goldsmith, Denise; Boomhower, Marc; Lancaster, Diane R; Antonelli, Mary; Kenyon, Mary Anne Murphy; Benoit, Angela; Chang, Frank; Dykes, Patricia C

2010-11-13

Dynamic and complex clinical environments present many challenges for effective communication among health care providers. The omission of accurate, timely, easily accessible vital information by health care providers significantly increases risk of patient harm and can have devastating consequences for patient care. An effective nursing handoff supports the standardized transfer of accurate, timely, critical patient information, as well as continuity of care and treatment, resulting in enhanced patient safety. The Brigham and Women's/Faulkner Hospital Healthcare Information Technology Innovation Program (HIP) is supporting the development of a web based nursing handoff tool (NHT). The goal of this project is to develop a "proof of concept" handoff application to be evaluated by nurses on the inpatient intermediate care units. The handoff tool would enable nurses to use existing knowledge of evidence-based handoff methodology in their everyday practice to improve patient care and safety. In this paper, we discuss the results of nursing focus groups designed to identify the current state of handoff practice as well as the functional and data element requirements of a web based Nursing Handoff Tool (NHT).

What can nanosafety learn from drug development? The feasibility of "safety by design".

PubMed

Hjorth, Rune; van Hove, Lilian; Wickson, Fern

2017-04-01

"Safety by design" (SbD) is an intuitively appealing concept that is on the rise within nanotoxicology and nanosafety research, as well as within nanotechnology research policy. It leans on principles established within drug discovery and development (DDD) and seeks to address safety early, as well as throughout product development. However, it remains unclear what the concept of SbD exactly entails for engineered nanomaterials (ENMs) or how it is envisioned to be implemented. Here, we review the concept as it is emerging in European research and compare its resemblance with the safety testing and assessment practices in DDD. From this comparison, it is clear that "safety" is not obtained through DDD, and that SbD should be considered a starting point rather than an end, meaning that products will still need to progress through thorough safety evaluations and regulation. We conclude that although risk reduction is clearly desirable, the way SbD is currently communicated tends to treat safety as an inherent material property and that this is fundamentally problematic as it represents a recasting and reduction of societal issues into technical problems. SbD therefore faces a multitude of challenges, from practical implementation to unrealistic stakeholder expectations.

Integrating Safety Assessment Methods using the Risk Informed Safety Margins Characterization (RISMC) Approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Curtis Smith; Diego Mandelli

Safety is central to the design, licensing, operation, and economics of nuclear power plants (NPPs). As the current light water reactor (LWR) NPPs age beyond 60 years, there are possibilities for increased frequency of systems, structures, and components (SSC) degradations or failures that initiate safety significant events, reduce existing accident mitigation capabilities, or create new failure modes. Plant designers commonly “over-design” portions of NPPs and provide robustness in the form of redundant and diverse engineered safety features to ensure that, even in the case of well-beyond design basis scenarios, public health and safety will be protected with a very highmore » degree of assurance. This form of defense-in-depth is a reasoned response to uncertainties and is often referred to generically as “safety margin.” Historically, specific safety margin provisions have been formulated primarily based on engineering judgment backed by a set of conservative engineering calculations. The ability to better characterize and quantify safety margin is important to improved decision making about LWR design, operation, and plant life extension. A systematic approach to characterization of safety margins and the subsequent margin management options represents a vital input to the licensee and regulatory analysis and decision making that will be involved. In addition, as research and development (R&D) in the LWR Sustainability (LWRS) Program and other collaborative efforts yield new data, sensors, and improved scientific understanding of physical processes that govern the aging and degradation of plant SSCs needs and opportunities to better optimize plant safety and performance will become known. To support decision making related to economics, readability, and safety, the RISMC Pathway provides methods and tools that enable mitigation options known as margins management strategies. The purpose of the RISMC Pathway R&D is to support plant decisions for risk

Are automatic systems the future of motorcycle safety? A novel methodology to prioritize potential safety solutions based on their projected effectiveness.

PubMed

Gil, Gustavo; Savino, Giovanni; Piantini, Simone; Baldanzini, Niccolò; Happee, Riender; Pierini, Marco

2017-11-17

Motorcycle riders are involved in significantly more crashes per kilometer driven than passenger car drivers. Nonetheless, the development and implementation of motorcycle safety systems lags far behind that of passenger cars. This research addresses the identification of the most effective motorcycle safety solutions in the context of different countries. A knowledge-based system of motorcycle safety (KBMS) was developed to assess the potential for various safety solutions to mitigate or avoid motorcycle crashes. First, a set of 26 common crash scenarios was identified from the analysis of multiple crash databases. Second, the relative effectiveness of 10 safety solutions was assessed for the 26 crash scenarios by a panel of experts. Third, relevant information about crashes was used to weigh the importance of each crash scenario in the region studied. The KBMS method was applied with an Italian database, with a total of more than 1 million motorcycle crashes in the period 2000-2012. When applied to the Italian context, the KBMS suggested that automatic systems designed to compensate for riders' or drivers' errors of commission or omission are the potentially most effective safety solution. The KBMS method showed an effective way to compare the potential of various safety solutions, through a scored list with the expected effectiveness of each safety solution for the region to which the crash data belong. A comparison of our results with a previous study that attempted a systematic prioritization of safety systems for motorcycles (PISa project) showed an encouraging agreement. Current results revealed that automatic systems have the greatest potential to improve motorcycle safety. Accumulating and encoding expertise in crash analysis from a range of disciplines into a scalable and reusable analytical tool, as proposed with the use of KBMS, has the potential to guide research and development of effective safety systems. As the expert assessment of the crash

Evaluation of Design Assurance Regulations for Safety of Space Navigation Services

NASA Astrophysics Data System (ADS)

Ratti, B.; Sarno, M.; De Andreis, C.

2005-12-01

The European Space Agency (ESA), the European Community (EC), and the European Organisation for the Safety of Air Navigation (Eurocontrol) are contributing to the development of a Global positioning and Navigation Satellite System, known as GNSS. The development programme is carried out in two main steps:• GNSS-1: the first-generation system, based on signals received from the GPS (USA) and GLONASS (Russia) constellations, and augmentation systems like EGNOS (European Geostationary Navigation Overlay Service)• GNSS-2: the second-generation system, that will achieve the ultimate objective of European sovereignty for position determination, navigation and time dissemination. This system, named Galileo, comprises a global space and ground control infrastructure.The Galileo navigation signal will be used in the frame of safety-critical transport applications, thus it is necessary to assess the space safety assurance activity against the civil safety regulations and safety management system.. RTCA DO-254 and IEC 61508 standards, considered as part of best practice engineering references, for the development of safety- related systems in most applications, were selected during phases B2 and C0 of the Galileo project for this purpose.

Review of Reliability-Based Design Optimization Approach and Its Integration with Bayesian Method

NASA Astrophysics Data System (ADS)

Zhang, Xiangnan

2018-03-01

A lot of uncertain factors lie in practical engineering, such as external load environment, material property, geometrical shape, initial condition, boundary condition, etc. Reliability method measures the structural safety condition and determine the optimal design parameter combination based on the probabilistic theory. Reliability-based design optimization (RBDO) is the most commonly used approach to minimize the structural cost or other performance under uncertainty variables which combines the reliability theory and optimization. However, it cannot handle the various incomplete information. The Bayesian approach is utilized to incorporate this kind of incomplete information in its uncertainty quantification. In this paper, the RBDO approach and its integration with Bayesian method are introduced.

Application research of rail transit safety protection based on laser detection

NASA Astrophysics Data System (ADS)

Wang, Zhifei

2016-10-01

Platform screen door can not only prevent the passengers fell or jumped the track danger, to passengers bring comfortable waiting environment, but also has the function of environmental protection and energy saving. But platform screen door and train the full-length gap region is insecure in the system design of a hidden, such as passengers for some reason (grab the train) in the interstitial region retention, is sandwiched between the intercity safety door and the door, and such as the region lacks security detection and alarm system, once the passengers in the gap region retention (caught), bring more serious threat to the safety of passengers and traffic safety. This paper from the point of view of the design presents the physical, infrared, laser three safety protection device setting schemes. Domestic intelligence of between rail transit shield door and train security clearance processing used is screen door system standard configuration, the obstacle detection function for avoid passengers stranded in the clearance has strong prevention function. Laser detection research and development projects can access to prevent shield door and train gap clamp safety measures. Rail safety protection method are studied applying laser detection technique. According to the laser reflection equation of foreign body, the characteristics of laser detection of foreign bodies are given in theory. By using statistical analysis method, the workflow of laser detection system is established. On this basis, protection methods is proposed. Finally the simulation and test results show that the laser detection technology in the rail traffic safety protection reliability and stability, And the future laser detection technology in is discussed the development of rail transit.

Safety of antisense oligonucleotide and siRNA-based therapeutics.

PubMed

Chi, Xuan; Gatti, Philip; Papoian, Thomas

2017-05-01

Oligonucleotide-based therapy is an active area of drug development designed to treat a variety of gene-specific diseases. Two of the more promising platforms are the antisense oligonucleotides (ASOs) and short interfering RNAs (siRNAs), both of which are often directed against similar targets. In light of recent reports on clinical trials of severe thrombocytopenia with two different ASO drugs and increased peripheral neuropathy with an siRNA drug, we compared and contrasted the specific safety characteristics of these two classes of oligonucleotide therapeutic. The objectives were to assess factors that could contribute to the specific toxicities observed with these two classes of promising drugs, and get a better understanding of the potential mechanism(s) responsible for these rare, but serious, adverse events. Published by Elsevier Ltd.

Mortality Trends After a Voluntary Checklist-based Surgical Safety Collaborative.

PubMed

Haynes, Alex B; Edmondson, Lizabeth; Lipsitz, Stuart R; Molina, George; Neville, Bridget A; Singer, Sara J; Moonan, Aunyika T; Childers, Ashley Kay; Foster, Richard; Gibbons, Lorri R; Gawande, Atul A; Berry, William R

2017-12-01

To determine whether completion of a voluntary, checklist-based surgical quality improvement program is associated with reduced 30-day postoperative mortality. Despite evidence of efficacy of team-based surgical safety checklists in improving perioperative outcomes in research trials, effective methods of population-based implementation have been lacking. The Safe Surgery 2015 South Carolina program was designed to foster state-wide engagement of hospitals in a voluntary, collaborative implementation of a checklist program. We compared postoperative mortality rates after inpatient surgery in South Carolina utilizing state-wide all-payer discharge claims from 2008 to 2013, linked with state vital statistics, stratifying hospitals on the basis of completion of the checklist program. Changes in risk-adjusted 30-day mortality were compared between hospitals, using propensity score-adjusted difference-in-differences analysis. Fourteen hospitals completed the program by December 2013. Before program launch, there was no difference in mortality trends between the completion cohort and all others (P = 0.33), but postoperative mortality diverged thereafter (P = 0.021). Risk-adjusted 30-day mortality among completers was 3.38% in 2010 and 2.84% in 2013 (P < 0.00001), whereas mortality among other hospitals (n = 44) was 3.50% in 2010 and 3.71% in 2013 (P = 0.3281), reflecting a 22% difference between the groups on difference-in-differences analysis (P = 0.0021). Despite similar pre-existing rates and trends of postoperative mortality, hospitals in South Carolina completing a voluntary checklist-based surgical quality improvement program had a reduction in deaths after inpatient surgery over the first 3 years of the collaborative compared with other hospitals in the state. This may indicate that effective large-scale implementation of a team-based surgical safety checklist is feasible.

Towards a Competency-based Vision for Construction Safety Education

NASA Astrophysics Data System (ADS)

Pedro, Akeem; Hai Chien, Pham; Park, Chan Sik

2018-04-01

Accidents still prevail in the construction industry, resulting in injuries and fatalities all over the world. Educational programs in construction should deliver safety knowledge and skills to students who will become responsible for ensuring safe construction work environments in the future. However, there is a gap between the competencies current pedagogical approaches target, and those required for safety in practice. This study contributes to addressing this issue in three steps. Firstly, a vision for competency-based construction safety education is conceived. Building upon this, a research scheme to achieve the vision is developed, and the first step of the scheme is initiated in this study. The critical competencies required for safety education are investigated through analyses of literature, and confirmed through surveys with construction and safety management professionals. Results from the study would be useful in establishing and orienting education programs towards current industry safety needs and requirements

Implementing healthcare excellence: the vital role of the CEO in evidence-based design.

PubMed

Zimring, Craig; Augenbroe, Godfried L; Malone, Eileen B; Sadler, Blair L

2008-01-01

This paper explores the role of the chief executive officer (CEO) in evidence-based design (EBD), discussing the internal and external challenges that a CEO faces, such as demands for increased quality, safety, patient-and-family-centeredness, increased revenue, and reduced cost. Based on a series of interviews and case studies and the experience of the authors as researchers, consultants, and CEOs, this paper provides a model for EBD and recommends actions that a CEO can undertake to create an effective project over the life cycle of a building. TOPICAL HEADINGS: Evidence-Based Design: A Performance-Based Approach to Achieving Key Goals; Key Approaches to Executing Evidence-Based Design; Overcoming Barriers to Innovation: The CEO's Vital Role in Implementing Evidence-Based Design The CEO bears special responsibility for successful facility project implementation. Only the CEO possesses the responsibility and authority to articulate the strategy, vision, goals, and resource constraints that frame every project. With the support of their boards, CEOs set the stage for the transformation of an organization's culture and fuel clinical and business process reengineering by encouraging and, if necessary, forcing collaboration between the strong disciplinary and departmental divisions found in healthcare systems.

Experimental validation of a Lyapunov-based controller for the plasma safety factor and plasma pressure in the TCV tokamak

NASA Astrophysics Data System (ADS)

Mavkov, B.; Witrant, E.; Prieur, C.; Maljaars, E.; Felici, F.; Sauter, O.; the TCV-Team

2018-05-01

In this paper, model-based closed-loop algorithms are derived for distributed control of the inverse of the safety factor profile and the plasma pressure parameter β of the TCV tokamak. The simultaneous control of the two plasma quantities is performed by combining two different control methods. The control design of the plasma safety factor is based on an infinite-dimensional setting using Lyapunov analysis for partial differential equations, while the control of the plasma pressure parameter is designed using control techniques for single-input and single-output systems. The performance and robustness of the proposed controller is analyzed in simulations using the fast plasma transport simulator RAPTOR. The control is then implemented and tested in experiments in TCV L-mode discharges using the RAPTOR model predicted estimates for the q-profile. The distributed control in TCV is performed using one co-current and one counter-current electron cyclotron heating actuation.

Occupational health and safety: Designing and building with MACBETH a value risk-matrix for evaluating health and safety risks

NASA Astrophysics Data System (ADS)

Lopes, D. F.; Oliveira, M. D.; Costa, C. A. Bana e.

2015-05-01

Risk matrices (RMs) are commonly used to evaluate health and safety risks. Nonetheless, they violate some theoretical principles that compromise their feasibility and use. This study describes how multiple criteria decision analysis methods have been used to improve the design and the deployment of RMs to evaluate health and safety risks at the Occupational Health and Safety Unit (OHSU) of the Regional Health Administration of Lisbon and Tagus Valley. ‘Value risk-matrices’ (VRMs) are built with the MACBETH approach in four modelling steps: a) structuring risk impacts, involving the construction of descriptors of impact that link risk events with health impacts and are informed by scientific evidence; b) generating a value measurement scale of risk impacts, by applying the MACBETH-Choquet procedure; c) building a system for eliciting subjective probabilities that makes use of a numerical probability scale that was constructed with MACBETH qualitative judgments on likelihood; d) and defining a classification colouring scheme for the VRM. A VRM built with OHSU members was implemented in a decision support system which will be used by OHSU members to evaluate health and safety risks and to identify risk mitigation actions.

Design of a Conceptual Bumper Energy Absorber Coupling Pedestrian Safety and Low-Speed Impact Requirements

PubMed Central

Mo, Fuhao; Zhao, Siqi; Yu, Chuanhui; Duan, Shuyong

2018-01-01

The car front bumper system needs to meet the requirements of both pedestrian safety and low-speed impact which are somewhat contradicting. This study aims to design a new kind of modular self-adaptive energy absorber of the front bumper system which can balance the two performances. The X-shaped energy-absorbing structure was proposed which can enhance the energy absorption capacity during impact by changing its deformation mode based on the amount of external collision energy. Then, finite element simulations with a realistic vehicle bumper system are performed to demonstrate its crashworthiness in comparison with the traditional foam energy absorber, which presents a significant improvement of the two performances. Furthermore, the structural parameters of the X-shaped energy-absorbing structure including thickness (t u), side arc radius (R), and clamping boost beam thickness (t b) are analyzed using a full factorial method, and a multiobjective optimization is implemented regarding evaluation indexes of both pedestrian safety and low-speed impact. The optimal parameters are then verified, and the feasibility of the optimal results is confirmed. In conclusion, the new X-shaped energy absorber can meet both pedestrian safety and low-speed impact requirements well by altering the main deformation modes according to different impact energy levels. PMID:29581728

Design of a Conceptual Bumper Energy Absorber Coupling Pedestrian Safety and Low-Speed Impact Requirements.

PubMed

Mo, Fuhao; Zhao, Siqi; Yu, Chuanhui; Xiao, Zhi; Duan, Shuyong

2018-01-01

The car front bumper system needs to meet the requirements of both pedestrian safety and low-speed impact which are somewhat contradicting. This study aims to design a new kind of modular self-adaptive energy absorber of the front bumper system which can balance the two performances. The X-shaped energy-absorbing structure was proposed which can enhance the energy absorption capacity during impact by changing its deformation mode based on the amount of external collision energy. Then, finite element simulations with a realistic vehicle bumper system are performed to demonstrate its crashworthiness in comparison with the traditional foam energy absorber, which presents a significant improvement of the two performances. Furthermore, the structural parameters of the X-shaped energy-absorbing structure including thickness ( t u ), side arc radius ( R ), and clamping boost beam thickness ( t b ) are analyzed using a full factorial method, and a multiobjective optimization is implemented regarding evaluation indexes of both pedestrian safety and low-speed impact. The optimal parameters are then verified, and the feasibility of the optimal results is confirmed. In conclusion, the new X-shaped energy absorber can meet both pedestrian safety and low-speed impact requirements well by altering the main deformation modes according to different impact energy levels.

Health and Safety Audit Design Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ternes, Mark P.; Langley, Brandon R.; Accawi, Gina K.

The Health and Safety Audit is an electronic audit tool developed by the Oak Ridge National Laboratory to assist in the identification and selection of health and safety measures when a home is being weatherized (i.e., receiving home energy upgrades), especially as part of the US Department of Energy (DOE) Weatherization Assistance Program, or during home energy-efficiency retrofit or remodeling jobs. The audit is specifically applicable to existing single-family homes (including mobile homes), and is generally applicable to individual dwelling units in low-rise multifamily buildings. The health and safety issues covered in the audit are grouped in nine categories: moldmore » and moisture, lead, radon, asbestos, formaldehyde and volatile organic compounds (VOCs), combustion, pest infestation, safety, and ventilation. Development of the audit was supported by the US Department of Housing and Urban Development Office of Healthy Homes and Lead Hazard Control and the DOE Weatherization Assistance Program.« less

Incorporating quality and safety education for nurses competencies in simulation scenario design.

PubMed

Jarzemsky, Paula; McCarthy, Jane; Ellis, Nadege

2010-01-01

When planning a simulation scenario, even if adopting prepackaged simulation scenarios, faculty should first conduct a task analysis to guide development of learning objectives and cue critical events. The authors describe a strategy for systematic planning of simulation-based training that incorporates knowledge, skills, and attitudes as defined by the Quality and Safety Education for Nurses (QSEN) initiative. The strategy cues faculty to incorporate activities that target QSEN competencies (patient-centered care, teamwork and collaboration, evidence-based practice, quality improvement, informatics, and safety) before, during, and after simulation scenarios.

Development and evaluation of a university campus-based food safety media campaign for young adults.

PubMed

Abbot, Jaclyn Maurer; Policastro, Peggy; Bruhn, Christine; Schaffner, Donald W; Byrd-Bredbenner, Carol

2012-06-01

Food safety information campaigns are more likely to be most effective if the messages are tailored to the needs of a specific audience. Designing effective campaigns involves careful study of the target population and working with them using a community-based participatory research model. Thus, the development of the campaign materials for a university campus-based food safety media campaign for young adults followed intense efforts of working with the target audience to gather the baseline data needed to characterize this audience, to identify the most salient messages for college students, and to create materials and events that would resonate with them. This campaign was implemented and evaluated on eight university campuses in the United States. The results indicate that the campaign significantly increased self-ratings of food safety knowledge and skill, actual food safety knowledge, food safety self-efficacy, stage of change for safe food handling, and reported hand washing behaviors of a geographically and racially diverse group of college students. The positive study outcomes support the value of engaging in these research and development efforts and reflect the usefulness of the audience-specific materials and activities developed for the campaign. The findings also demonstrate the versatility and utility of the materials on different campuses. Developing health media campaigns specifically for unique populations is key to ensuring health messages reach the target audience and, even more importantly, appeal to them. The detailed overview of the development of a food safety media campaign aimed at young adults presented in this article illustrates how health professionals can work with their target population to develop a focused, effective health promotion campaign.

Experimental Study and Computational Simulations of Key Pebble Bed Thermo-mechanics Issues for Design and Safety

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tokuhiro, Akira; Potirniche, Gabriel; Cogliati, Joshua

2014-07-08

An experimental and computational study, consisting of modeling and simulation (M&S), of key thermal-mechanical issues affecting the design and safety of pebble-bed (PB) reactors was conducted. The objective was to broaden understanding and experimentally validate thermal-mechanic phenomena of nuclear grade graphite, specifically, spheres in frictional contact as anticipated in the bed under reactor relevant pressures and temperatures. The contact generates graphite dust particulates that can subsequently be transported into the flowing gaseous coolent. Under postulated depressurization transients and with the potential for leaked fission products to be adsorbed onto graphite 'dust', there is the potential for fission products to escapemore » from the primary volume. This is a design safety concern. Furthermore, earlier safety assessment identified the distinct possibility for the dispersed dust to combust in contact with air if sufficient conditions are met. Both of these phenomena were noted as important to design review and containing uncertainty to warrant study. The team designed and conducted two separate effects tests to study and benchmark the potential dust-generation rate, as well as study the conditions under which a dust explosion may occure in a standardized, instrumented explosion chamber.« less

Using network screening methods to determine locations with specific safety issues: A design consistency case study.

PubMed

Butsick, Andrew J; Wood, Jonathan S; Jovanis, Paul P

2017-09-01

The Highway Safety Manual provides multiple methods that can be used to identify sites with promise (SWiPs) for safety improvement. However, most of these methods cannot be used to identify sites with specific problems. Furthermore, given that infrastructure funding is often specified for use related to specific problems/programs, a method for identifying SWiPs related to those programs would be very useful. This research establishes a method for Identifying SWiPs with specific issues. This is accomplished using two safety performance functions (SPFs). This method is applied to identifying SWiPs with geometric design consistency issues. Mixed effects negative binomial regression was used to develop two SPFs using 5 years of crash data and over 8754km of two-lane rural roadway. The first SPF contained typical roadway elements while the second contained additional geometric design consistency parameters. After empirical Bayes adjustments, sites with promise (SWiPs) were identified. The disparity between SWiPs identified by the two SPFs was evident; 40 unique sites were identified by each model out of the top 220 segments. By comparing sites across the two models, candidate road segments can be identified where a lack design consistency may be contributing to an increase in expected crashes. Practitioners can use this method to more effectively identify roadway segments suffering from reduced safety performance due to geometric design inconsistency, with detailed engineering studies of identified sites required to confirm the initial assessment. Copyright © 2017 Elsevier Ltd. All rights reserved.

Design and performance of a production-worthy excimer-laser-based stepper

NASA Astrophysics Data System (ADS)

Unger, Robert; Sparkes, Christopher; Disessa, Peter A.; Elliott, David J.

1992-06-01

Excimer-laser-based steppers have matured to a production-worthy state. Widefield high-NA lenses have been developed and characterized for imaging down to 0.35 micron and below. Excimer lasers have attained practical levels of performance capability and stability, reliability, safety, and operating cost. Excimer stepper system integration and control issues such as focus, exposure, and overlay stability have been addressed. Enabling support technologies -- resist systems, resist processing, metrology and conventional mask making -- continue to progress and are becoming available. This paper discusses specific excimer stepper design challenges, and presents characterization data from several field installations of XLSTM deep-UV steppers configured with an advanced lens design.

The Elementary Science Safety Manual. Revised.

ERIC Educational Resources Information Center

New Jersey State Dept. of Education, Trenton. Div. of General Academic Education.

Based on the principle that safety education should be a vital component in science instruction, this manual was designed to assist elementary teachers in doing more experiments and activities more confidently by making them aware of dangers and precautions. It also aims to make students aware that safety is a lifetime process and responsibility.…

Technical challenges in designing post-marketing eCRFs to address clinical safety and pharmacovigilance needs.

PubMed

Lu, Zhengwu

2010-01-01

To identify key challenges and propose technical considerations in designing electronic case report form (eCRF) for post-marketing studies, the author undertakes a comprehensive literature review of peer reviewed and grey literature to assess the key aspects, processes, standards, recommendations, and best practices in designing eCRFs based on industry experience in designing and supporting electronic data capture (EDC) studies. Literature search using strings on MEDLINE and PUBMED returned few papers directly related to CRF design. Health informatics and general practice journals were searched and results reviewed. Many conference, government commission, health professional and special interests group websites provide relevant information from practical experience - summarization of this information is presented. Further, we presented a list of concrete technical considerations in dealing with EDC technology/system limitations based on literature assessment and industry implementation experience. It is recognized that cross-functional teams be involved in eCRF design process and decision making. To summarize the keys in designing eCRFs to address post-market study safety and pharmacovigilance needs, the first is to identify required data elements from the study protocol supporting data analyses and reporting requirements. Secondly, accepted best practices, CDASH & CDISC guidelines, and company internal or therapeutic unit standard should be considered and applied. Coding (MedDRA & WHODD) mapping should be managed and implemented as well when possible. Finally, we need to be on top of the EDC technologies, challenge the technologies, drive EDC improvement via working with vendors, and utilize the technologies to drive clinical effectiveness. Copyright (c) 2009 Elsevier Inc. All rights reserved.

Road Risk Modeling and Cloud-Aided Safety-Based Route Planning.

PubMed

Li, Zhaojian; Kolmanovsky, Ilya; Atkins, Ella; Lu, Jianbo; Filev, Dimitar P; Michelini, John

2016-11-01

This paper presents a safety-based route planner that exploits vehicle-to-cloud-to-vehicle (V2C2V) connectivity. Time and road risk index (RRI) are considered as metrics to be balanced based on user preference. To evaluate road segment risk, a road and accident database from the highway safety information system is mined with a hybrid neural network model to predict RRI. Real-time factors such as time of day, day of the week, and weather are included as correction factors to the static RRI prediction. With real-time RRI and expected travel time, route planning is formulated as a multiobjective network flow problem and further reduced to a mixed-integer programming problem. A V2C2V implementation of our safety-based route planning approach is proposed to facilitate access to real-time information and computing resources. A real-world case study, route planning through the city of Columbus, Ohio, is presented. Several scenarios illustrate how the "best" route can be adjusted to favor time versus safety metrics.

New method for distance-based close following safety indicator.

PubMed

Sharizli, A A; Rahizar, R; Karim, M R; Saifizul, A A

2015-01-01

The increase in the number of fatalities caused by road accidents involving heavy vehicles every year has raised the level of concern and awareness on road safety in developing countries like Malaysia. Changes in the vehicle dynamic characteristics such as gross vehicle weight, travel speed, and vehicle classification will affect a heavy vehicle's braking performance and its ability to stop safely in emergency situations. As such, the aim of this study is to establish a more realistic new distance-based safety indicator called the minimum safe distance gap (MSDG), which incorporates vehicle classification (VC), speed, and gross vehicle weight (GVW). Commercial multibody dynamics simulation software was used to generate braking distance data for various heavy vehicle classes under various loads and speeds. By applying nonlinear regression analysis to the simulation results, a mathematical expression of MSDG has been established. The results show that MSDG is dynamically changed according to GVW, VC, and speed. It is envisaged that this new distance-based safety indicator would provide a more realistic depiction of the real traffic situation for safety analysis.

Thematic Analysis of Women's Perspectives on the Meaning of Safety During Hospital-Based Birth.

PubMed

Lyndon, Audrey; Malana, Jennifer; Hedli, Laura C; Sherman, Jules; Lee, Henry C

2018-05-01

To explore women's birth experiences to develop an understanding of their perspectives on patient safety during hospital-based birth. Qualitative description using thematic analysis of interview data. Seventeen women ages 29 to 47 years. Women participated in individual or small group interviews about their birth experiences, the physical environment, interactions with clinicians, and what safety meant to them in the context of birth. An interdisciplinary group of five investigators from nursing, medicine, product design, and journalism analyzed transcripts thematically to examine how women experienced feeling safe or unsafe and identify opportunities for improvements in care. Participants experienced feelings of safety on a continuum. These feelings were affected by confidence in providers, the environment and organizational factors, interpersonal interactions, and actions people took during risk moments of rapid or confusing change. Well-organized teams and sensitive interpersonal interactions that demonstrated human connection supported feelings of safety, whereas some routine aspects of care threatened feelings of safety. Physical and emotional safety are inextricably embedded in the patient experience, yet this connection may be overlooked in some inpatient birth settings. Clinicians should be mindful of how the birth environment and their behaviors in it can affect a woman's feelings of safety during birth. Human connection is especially important during risk moments, which represent a liminal space at the intersection of physical and emotional safety. At least one team member should focus on the provision of emotional support during rapidly changing situations to mitigate the potential for negative experiences that can result in emotional harm. Copyright © 2018 AWHONN, the Association of Women's Health, Obstetric and Neonatal Nurses. Published by Elsevier Inc. All rights reserved.

Design and Implementation of the Harvard Fellowship in Patient Safety and Quality.

PubMed

Gandhi, Tejal K; Abookire, Susan A; Kachalia, Allen; Sands, Kenneth; Mort, Elizabeth; Bommarito, Grace; Gagne, Jane; Sato, Luke; Weingart, Saul N

2016-01-01

The Harvard Fellowship in Patient Safety and Quality is a 2-year physician-oriented training program with a strong operational orientation, embedding trainees in the quality departments of participating hospitals. It also integrates didactic and experiential learning and offers the option of obtaining a master's degree in public health. The program focuses on methodologically rigorous improvement and measurement, with an emphasis on the development and implementation of innovative practice. The operational orientation is intended to foster the professional development of future quality and safety leaders. The purpose of this article is to describe the design and development of the fellowship. © The Author(s) 2014.

Fall prevention and safety communication training for foremen:Report of a pilot project designed to improve residential construction safety

PubMed Central

Kaskutas, Vicki; Dale, Ann Marie; Lipscomb, Hester; Evanoff, Brad

2013-01-01

Problem Falls from heights account for 64% of residential construction worker fatalities and 20% of missed work days. We hypothesized that worker safety would improve with foremen training in fall prevention and safety communication. Method Training priorities identified through foreman and apprentice focus groups and surveys were integrated into an 8-hour training. We piloted the training with ten foremen employed by a residential builder. Carpenter trainers contrasted proper methods to protect workers from falls with methods observed at the foremen’s worksites. Trainers presented methods to deliver toolbox talks and safety messages. Results from worksite observational audits (n=29) and foremen/crewmember surveys (n=97) administered before and after training were compared. Results We found that inexperienced workers are exposed to many fall hazards that they are often not prepared to negotiate. Fall protection is used inconsistently and worksite mentorship is often inadequate. Foremen feel pressured to meet productivity demands and some are unsure of the fall protection requirements. After the training, the frequency of daily mentoring and toolbox talks increased, and these talks became more interactive and focused on hazardous daily work tasks. Foremen observed their worksites for fall hazards more often. We observed increased compliance with fall protection and decreased unsafe behaviors during worksite audits. Discussion Designing the training to meet both foremen’s and crewmembers’ needs ensured the training was learner-centered and contextually-relevant. This pilot suggests that training residential foremen can increase use of fall protection, improve safety behaviors, and enhance on-the-job training and safety communication at their worksites. Impact on Industry Construction workers’ training should target safety communication and mentoring skills with workers who will lead work crews. Interventions at multiple levels are necessary to increase safety

Fall prevention and safety communication training for foremen: report of a pilot project designed to improve residential construction safety.

PubMed

Kaskutas, Vicki; Dale, Ann Marie; Lipscomb, Hester; Evanoff, Brad

2013-02-01

Falls from heights account for 64% of residential construction worker fatalities and 20% of missed work days. We hypothesized that worker safety would improve with foremen training in fall prevention and safety communication. Training priorities identified through foreman and apprentice focus groups and surveys were integrated into an 8-hour training. We piloted the training with ten foremen employed by a residential builder. Carpenter trainers contrasted proper methods to protect workers from falls with methods observed at the foremen's worksites. Trainers presented methods to deliver toolbox talks and safety messages. Results from worksite observational audits (n=29) and foremen/crewmember surveys (n=97) administered before and after training were compared. We found that inexperienced workers are exposed to many fall hazards that they are often not prepared to negotiate. Fall protection is used inconsistently and worksite mentorship is often inadequate. Foremen feel pressured to meet productivity demands and some are unsure of the fall protection requirements. After the training, the frequency of daily mentoring and toolbox talks increased, and these talks became more interactive and focused on hazardous daily work tasks. Foremen observed their worksites for fall hazards more often. We observed increased compliance with fall protection and decreased unsafe behaviors during worksite audits. Designing the training to meet both foremen's and crewmembers' needs ensured the training was learner-centered and contextually-relevant. This pilot suggests that training residential foremen can increase use of fall protection, improve safety behaviors, and enhance on-the-job training and safety communication at their worksites. Construction workers' training should target safety communication and mentoring skills with workers who will lead work crews. Interventions at multiple levels are necessary to increase safety compliance in residential construction and decrease falls

Generic Safety Requirements for Developing Safe Insulin Pump Software

PubMed Central

Zhang, Yi; Jetley, Raoul; Jones, Paul L; Ray, Arnab

2011-01-01

Background The authors previously introduced a highly abstract generic insulin infusion pump (GIIP) model that identified common features and hazards shared by most insulin pumps on the market. The aim of this article is to extend our previous work on the GIIP model by articulating safety requirements that address the identified GIIP hazards. These safety requirements can be validated by manufacturers, and may ultimately serve as a safety reference for insulin pump software. Together, these two publications can serve as a basis for discussing insulin pump safety in the diabetes community. Methods In our previous work, we established a generic insulin pump architecture that abstracts functions common to many insulin pumps currently on the market and near-future pump designs. We then carried out a preliminary hazard analysis based on this architecture that included consultations with many domain experts. Further consultation with domain experts resulted in the safety requirements used in the modeling work presented in this article. Results Generic safety requirements for the GIIP model are presented, as appropriate, in parameterized format to accommodate clinical practices or specific insulin pump criteria important to safe device performance. Conclusions We believe that there is considerable value in having the diabetes, academic, and manufacturing communities consider and discuss these generic safety requirements. We hope that the communities will extend and revise them, make them more representative and comprehensive, experiment with them, and use them as a means for assessing the safety of insulin pump software designs. One potential use of these requirements is to integrate them into model-based engineering (MBE) software development methods. We believe, based on our experiences, that implementing safety requirements using MBE methods holds promise in reducing design/implementation flaws in insulin pump development and evolutionary processes, therefore improving

Fire safety

Treesearch

Robert H. White; Mark A. Dietenberger

1999-01-01

Fire safety is an important concern in all types of construction. The high level of national concern for fire safety is reflected in limitations and design requirements in building codes. These code requirements are discussed in the context of fire safety design and evaluation in the initial section of this chapter. Since basic data on fire behavior of wood products...

Optimal Design of Integrated Systems Health Management (ISHM) Systems for improving safety in NASA's Exploration Vehicles: A Two-Level Multidisciplinary Design Approach

NASA Technical Reports Server (NTRS)

Mehr, Ali Farhang; Tumer, Irem; Barszcz, Eric

2005-01-01

Integrated Vehicle Health Management (ISHM) systems are used to detect, assess, and isolate functional failures in order to improve safety of space systems such as Orbital Space Planes (OSPs). An ISHM system, as a whole, consists of several subsystems that monitor different components of an OSP including: Spacecraft, Launch Vehicle, Ground Control, and the International Space Station. In this research, therefore, we propose a new methodology to design and optimize ISHM as a distributed system with multiple disciplines (that correspond to different subsystems of OSP safety). A paramount amount of interest has been given in the literature to the multidisciplinary design optimization of problems with such architecture (as will be reviewed in the full paper).

Multi-mode reliability-based design of horizontal curves.

PubMed

Essa, Mohamed; Sayed, Tarek; Hussein, Mohamed

2016-08-01

Recently, reliability analysis has been advocated as an effective approach to account for uncertainty in the geometric design process and to evaluate the risk associated with a particular design. In this approach, a risk measure (e.g. probability of noncompliance) is calculated to represent the probability that a specific design would not meet standard requirements. The majority of previous applications of reliability analysis in geometric design focused on evaluating the probability of noncompliance for only one mode of noncompliance such as insufficient sight distance. However, in many design situations, more than one mode of noncompliance may be present (e.g. insufficient sight distance and vehicle skidding at horizontal curves). In these situations, utilizing a multi-mode reliability approach that considers more than one failure (noncompliance) mode is required. The main objective of this paper is to demonstrate the application of multi-mode (system) reliability analysis to the design of horizontal curves. The process is demonstrated by a case study of Sea-to-Sky Highway located between Vancouver and Whistler, in southern British Columbia, Canada. Two noncompliance modes were considered: insufficient sight distance and vehicle skidding. The results show the importance of accounting for several noncompliance modes in the reliability model. The system reliability concept could be used in future studies to calibrate the design of various design elements in order to achieve consistent safety levels based on all possible modes of noncompliance. Copyright © 2016 Elsevier Ltd. All rights reserved.

Compassionate containment? Balancing technical safety and therapy in the design of psychiatric wards.

PubMed

Curtis, Sarah; Gesler, Wilbert; Wood, Victoria; Spencer, Ian; Mason, James; Close, Helen; Reilly, Joseph

2013-11-01

This paper contributes to the international literature examining design of inpatient settings for mental health care. Theoretically, it elaborates the connections between conceptual frameworks from different strands of literature relating to therapeutic landscapes, social control and the social construction of risk. It does so through a discussion of the substantive example of research to evaluate the design of a purpose built inpatient psychiatric health care facility, opened in 2010 as part of the National Health Service (NHS) in England. Findings are reported from interviews or discussion groups with staff, patients and their family and friends. This paper demonstrates a strong, and often critical awareness among members of staff and other participants about how responsibilities for risk governance of 'persons' are exercised through 'technical safety' measures and the implications for therapeutic settings. Our participants often emphasised how responsibility for technical safety was being invested in the physical infrastructure of certain 'places' within the hospital where risks are seen to be 'located'. This illuminates how the spatial dimensions of social constructions of risk are incorporated into understandings about therapeutic landscapes. There were also more subtle implications, partly relating to 'Panopticist' theories about how the institution uses technical safety to supervise its own mechanisms, through the observation of staff behaviour as well as patients and visitors. Furthermore, staff seemed to feel that in relying on technical safety measures they were, to a degree, divesting themselves of human responsibility for risks they are required to manage. However, their critical assessment showed their concerns about how this might conflict with a more therapeutic approach and they contemplated ways that they might be able to engage more effectively with patients without the imposition of technical safety measures. These findings advance our thinking

Engineering nanomaterials-based biosensors for food safety detection.

PubMed

Lv, Man; Liu, Yang; Geng, Jinhui; Kou, Xiaohong; Xin, Zhihong; Yang, Dayong

2018-05-30

Food safety always remains a grand global challenge to human health, especially in developing countries. To solve food safety pertained problems, numerous strategies have been developed to detect biological and chemical contaminants in food. Among these approaches, nanomaterials-based biosensors provide opportunity to realize rapid, sensitive, efficient and portable detection, overcoming the restrictions and limitations of traditional methods such as complicated sample pretreatment, long detection time, and relying on expensive instruments and well-trained personnel. In this review article, we provide a cross-disciplinary perspective to review the progress of nanomaterials-based biosensors for the detection of food contaminants. The review article is organized by the category of food contaminants including pathogens/toxins, heavy metals, pesticides, veterinary drugs and illegal additives. In each category of food contaminant, the biosensing strategies are summarized including optical, colorimetric, fluorescent, electrochemical, and immune- biosensors; the relevant analytes, nanomaterials and biosensors are analyzed comprehensively. Future perspectives and challenges are also discussed briefly. We envision that our review could bridge the gap between the fields of food science and nanotechnology, providing implications for the scientists or engineers in both areas to collaborate and promote the development of nanomaterials-based biosensors for food safety detection. Copyright © 2018 Elsevier B.V. All rights reserved.

Analytical methodology for safety validation of computer controlled subsystems. Volume 1 : state-of-the-art and assessment of safety verification/validation methodologies

DOT National Transportation Integrated Search

1995-09-01

This report describes the development of a methodology designed to assure that a sufficiently high level of safety is achieved and maintained in computer-based systems which perform safety critical functions in high-speed rail or magnetic levitation ...

KERENA safety concept in the context of the Fukushima accident

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zacharias, T.; Novotny, C.; Bielor, E.

Within the last three years AREVA NP and E.On KK finalized the basic design of KERENA which is a medium sized innovative boiling water reactor, based on the operational experience of German BWR nuclear power plants (NPPs). It is a generation III reactor design with a net electrical output of about 1250 MW. It combines active safety equipment of service-proven designs with new passive safety components, both safety classified. The passive systems utilize basic laws of physics, such as gravity and natural convection, enabling them to function without electric power. Even actuation of these systems is performed thanks to basicmore » physic laws. The degree of diversity in component and system design, achieved by combining active and passive equipment, results in a very low core damage frequency. The Fukushima accident enhanced the world wide discussion about the safety of operating nuclear power plants. World wide stress tests for operating nuclear power plants are being performed embracing both natural and man made hazards. Beside the assessment of existing power plants, also new designs are analyzed regarding the system response to beyond design base accidents. KERENA's optimal combination of diversified cooling systems (active and passive) allows passing efficiently such tests, with a high level of confidence. This paper describes the passive safety components and the KERENA reactor behavior after a Fukushima like accident. (authors)« less

Safety Testing of Ammonium Nitrate Based Mixtures

NASA Astrophysics Data System (ADS)

Phillips, Jason; Lappo, Karmen; Phelan, James; Peterson, Nathan; Gilbert, Don

2013-06-01

Ammonium nitrate (AN)/ammonium nitrate based explosives have a lengthy documented history of use by adversaries in acts of terror. While historical research has been conducted on AN-based explosive mixtures, it has primarily focused on detonation performance while varying the oxygen balance between the oxidizer and fuel components. Similarly, historical safety data on these materials is often lacking in pertinent details such as specific fuel type, particle size parameters, oxidizer form, etc. A variety of AN-based fuel-oxidizer mixtures were tested for small-scale sensitivity in preparation for large-scale testing. Current efforts focus on maintaining a zero oxygen-balance (a stoichiometric ratio for active chemical participants) while varying factors such as charge geometry, oxidizer form, particle size, and inert diluent ratios. Small-scale safety testing was conducted on various mixtures and fuels. It was found that ESD sensitivity is significantly affected by particle size, while this is less so for impact and friction. Thermal testing is in progress to evaluate hazards that may be experienced during large-scale testing.

Functional design criteria for interim stabilization safety class 1 trip circuit

DOE Office of Scientific and Technical Information (OSTI.GOV)

Larson, R.E., Westinghouse Hanford

1996-06-10

This Functional Design Criteria document outlines the basic requirements for the Safety Class 1 Trip Circuit. The objective of the Safety Class 1 Trip Circuit is to isolate the power circuitry to the Class 1 Division 2, Group B or lesser grade electrically fed loads located in the pump pit. The electrically fed load circuits need to have power isolated to them upon receipt of the following conditions, loss of flammable gases being released (above a predetermined threshold), and seismic(greater than 0.12g acceleration) activity. The two circuits requiring power isolation are the pump and heat trace power circuits. The Safetymore » Class 1 Trip Circuit will be used to support salt well pumping in SST`s containing potentially flammable gas-bearing / gas-producing radioactive waste.« less

A web-based incident reporting system and multidisciplinary collaborative projects for patient safety in a Japanese hospital

PubMed Central

Nakajima, K; Kurata, Y; Takeda, H

2005-01-01



Problem: When patient safety programs were mandated for Japanese health care institutions, a safety culture, a tool for collecting incident reports, an organizational arrangement for multidisciplinary collaboration, and interventional methods for improvement had to be established. Design: Observational study of effects of new patient safety programs. Setting: Osaka University Hospital, a large government-run teaching hospital. Strategy for change: A voluntary and anonymous web-based incident reporting system was introduced. For the new organizational structure a clinical risk management committee, a department of clinical quality management, and area clinical risk managers were established with their respective roles clearly defined to advance the plan-do-study-act cycle and to integrate efforts. For preventive action, alert procedures, staff education, ward rounds by peers, a system oriented approach for reducing errors, and various feedback channels were introduced. Effects of change: Continuous incident reporting by all hospital staff has been observed since the introduction of the new system. Several error inducing situations have been improved: wrong choice of drug in computer prescribing, maladministration of drugs due to a look-alike appearance or confusion about the manipulation of a medical device, and poor after hours service of the blood transfusion unit. Staff participation in educational seminars has been dramatically improved. Ward rounds have detected problematic procedures which needed to be dealt with. Lessons learnt: Patient safety programs based on a web-based incident reporting system, responsible persons, staff education, and a variety of feedback procedures can help promote a safety culture, multidisciplinary collaboration, and strong managerial leadership resulting in system oriented improvement. PMID:15805458

Conducting Clinically Based Intimate Partner Violence Research: Safety Protocol Recommendations.

PubMed

Anderson, Jocelyn C; Glass, Nancy E; Campbell, Jacquelyn C

Maintaining safety is of utmost importance during research involving participants who have experienced intimate partner violence (IPV). Limited guidance on safety protocols to protect participants is available, particularly information related to technology-based approaches to informed consent, data collection, and contacting participants during the course of a study. The purpose of the article is to provide details on the safety protocol developed and utilized with women receiving care at an urban HIV clinic and who were taking part in an observational study of IPV, mental health symptoms, and substance abuse and their relationship to HIV treatment adherence. The protocol presents the technological strategies to promote safety and allow autonomy in participant decision-making throughout the research process, including Voice over Internet Protocol telephone numbers, and tablet-based eligibility screening and data collection. Protocols for management of participants at risk for suicide and/or intimate partner homicide that included automated high-risk messaging to participants and research staff and facilitated disclosure of risk to clinical staff based on participant preferences are discussed. Use of technology and partnership with clinic staff helped to provide an environment where research regarding IPV could be conducted without undue burden or risk to participants. Utilizing tablet-based survey administration provided multiple practical and safety benefits for participants. Most women who screened into high-risk categories for suicide or intimate partner homicide did not choose to have their results shared with their healthcare providers, indicating the importance of allowing participants control over information sharing whenever possible.

Effect of motivational group interviewing-based safety education on Workers' safety behaviors in glass manufacturing.

PubMed

Navidian, Ali; Rostami, Zahra; Rozbehani, Nasrin

2015-09-19

Worker safety education using models that identify and reinforce factors affecting behavior is essential. The present study aimed to determine the effect of safety education based on motivational interviewing on awareness of, attitudes toward, and engagement in worker safety in the glass production industry in Hamedan, Iran, in 2014. This was a quasi-experimental interventional study including a total of 70 production line workers at glass production facilities in Hamedan. The workers were randomly assigned to either an intervention or a control group, with 35 workers in each group. Participants in the control group received four one-hour safety education sessions, in the form of traditional lectures. Those in the intervention group received four educational sessions based on motivational group interviewing, which were conducted in four groups of eight to ten participants each. The instruments used included a researcher-developed questionnaire with checklists addressing safety awareness, and attitude and performance, which were completed before and 12 weeks after the intervention. The data were analyzed using descriptive statistics, independent and paired t-tests, and chi-squared tests. Having obtained the differences in scores before and after the intervention, we determined mean changes in the scores of awareness, attitude, and use of personal protective equipment among workers who underwent motivational group interviewing (3.74 ± 2.16, 1.71 ± 3.16, and 3.2 ± 1.92, respectively, p < 0.05). These scores were significantly greater than those of control workers who underwent traditional educational sessions (1.28 ± 1.93, 1.1 ± 3.07, and 0.2 ± 1.26, respectively). Our findings revealed that incorporation of motivational interviewing principles into safety education programs had the positive effect of enhancing workers' knowledge, attitude, and, particularly, implementation of safe behaviors. The application of this advisory approach

Neural Net Safety Monitor Design

NASA Technical Reports Server (NTRS)

Larson, Richard R.

2007-01-01

The National Aeronautics and Space Administration (NASA) at the Dryden Flight Research Center (DFRC) has been conducting flight-test research using an F-15 aircraft (figure 1). This aircraft has been specially modified to interface a neural net (NN) controller as part of a single-string Airborne Research Test System (ARTS) computer with the existing quad-redundant flight control system (FCC) shown in figure 2. The NN commands are passed to FCC channels 2 and 4 and are cross channel data linked (CCDL) to the other computers as shown. Numerous types of fault-detection monitors exist in the FCC when the NN mode is engaged; these monitors would cause an automatic disengagement of the NN in the event of a triggering fault. Unfortunately, these monitors still may not prevent a possible NN hard-over command from coming through to the control laws. Therefore, an additional and unique safety monitor was designed for a single-string source that allows authority at maximum actuator rates but protects the pilot and structural loads against excessive g-limits in the case of a NN hard-over command input. This additional monitor resides in the FCCs and is executed before the control laws are computed. This presentation describes a floating limiter (FL) concept1 that was developed and successfully test-flown for this program (figure 3). The FL computes the rate of change of the NN commands that are input to the FCC from the ARTS. A window is created with upper and lower boundaries, which is constantly floating and trying to stay centered as the NN command rates are changing. The limiter works by only allowing the window to move at a much slower rate than those of the NN commands. Anywhere within the window, however, full rates are allowed. If a rate persists in one direction, it will eventually hit the boundary and be rate-limited to the floating limiter rate. When this happens, a persistent counter begins and after a limit is reached, a NN disengage command is generated. The

Lunar base and Mars base design projects

NASA Technical Reports Server (NTRS)

Amos, J.; Campbell, J.; Hudson, C.; Kenny, E.; Markward, D.; Pham, C.; Wolf, C.

1989-01-01

The space design classes at the University of Texas at Austin undertook seven projects in support of the NASA/USRA advanced space design program during the 1988-89 year. A total of 51 students, including 5 graduate students, participated in the design efforts. Four projects were done within the Aerospace Engineering (ASE) design program and three within the Mechanical Engineering (ME) program. Both lunar base and Mars base design efforts were studied, and the specific projects were as follows: Lunar Crew Emergency Rescue Vehicle (ASE); Mars Logistics Lander Convertible to a Rocket Hopper (ME); A Robotically Constructed Production and Supply Base on Phobos (ASE); A Mars/Phobos Transportation System (ASE); Manned Base Design and Related Construction Issues for Mars/Phobos Mission (ME); and Health Care Needs for a Lunar Colony and Design of Permanent Medical Facility (ME).

Discrete Abstractions of Hybrid Systems: Verification of Safety and Application to User-Interface Design

NASA Technical Reports Server (NTRS)

Oishi, Meeko; Tomlin, Claire; Degani, Asaf

2003-01-01

Human interaction with complex hybrid systems involves the user, the automation's discrete mode logic, and the underlying continuous dynamics of the physical system. Often the user-interface of such systems displays a reduced set of information about the entire system. In safety-critical systems, how can we identify user-interface designs which do not have adequate information, or which may confuse the user? Here we describe a methodology, based on hybrid system analysis, to verify that a user-interface contains information necessary to safely complete a desired procedure or task. Verification within a hybrid framework allows us to account for the continuous dynamics underlying the simple, discrete representations displayed to the user. We provide two examples: a car traveling through a yellow light at an intersection and an aircraft autopilot in a landing/go-around maneuver. The examples demonstrate the general nature of this methodology, which is applicable to hybrid systems (not fully automated) which have operational constraints we can pose in terms of safety. This methodology differs from existing work in hybrid system verification in that we directly account for the user's interactions with the system.

A systematic review of the safety climate intervention literature: Past trends and future directions.

PubMed

Lee, Jin; Huang, Yueng-Hsiang; Cheung, Janelle H; Chen, Zhuo; Shaw, William S

2018-04-26

Safety climate represents the meaningfulness of safety and how safety is valued in an organization. The contributions of safety climate to organizational safety have been well documented. There is a dearth of empirical research, however, on specific safety climate interventions and their effectiveness. The present study aims at examining the trend of safety climate interventions and offering compiled information for designing and implementing evidence-based safety climate interventions. Our literature search yielded 384 titles that were inspected by three examiners. Using a stepwise process that allowed for assessment of interobserver agreement, 19 full articles were selected and reviewed. Results showed that 10 out of the 19 articles (52.6%) were based on a quasi-experimental pre- and postintervention design, whereas 42.1% (n = 8) studies were based on a mixed-design approach (including both between- and within-subject design). All interventions in these 19 studies involved either safety-/health-related communication or education/training. Improvement of safety leadership was also a common component of safety climate interventions. According to the socio-technical systems classification of intervention strategies, all studies were categorized as interventions focusing on improving organizational and managerial structure as well as the personnel subsystem; four of them also aimed at improving technological aspects of work, and five of them aimed at improving the physical work subsystem. In general, a vast majority of the studies (89.5%, n = 17) showed a statistically significant improvement in safety climate across their organizations postintervention. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

On Some Methods in Safety Evaluation in Geotechnics

NASA Astrophysics Data System (ADS)

Puła, Wojciech; Zaskórski, Łukasz

2015-06-01

The paper demonstrates how the reliability methods can be utilised in order to evaluate safety in geotechnics. Special attention is paid to the so-called reliability based design that can play a useful and complementary role to Eurocode 7. In the first part, a brief review of first- and second-order reliability methods is given. Next, two examples of reliability-based design are demonstrated. The first one is focussed on bearing capacity calculation and is dedicated to comparison with EC7 requirements. The second one analyses a rigid pile subjected to lateral load and is oriented towards working stress design method. In the second part, applications of random field to safety evaluations in geotechnics are addressed. After a short review of the theory a Random Finite Element algorithm to reliability based design of shallow strip foundation is given. Finally, two illustrative examples for cohesive and cohesionless soils are demonstrated.

The Effects of Safety Discrimination Training and Frequent Safety Observations on Safety-Related Behavior

ERIC Educational Resources Information Center

Taylor, Matthew A.; Alvero, Alicia M.

2012-01-01

The intent of the present study was to assess the effects of discrimination training only and in combination with frequent safety observations on five participants' safety-related behavior in a simulated office setting. The study used a multiple-baseline design across safety-related behaviors. Across all participants and behavior, safety improved…

Making the Case for Practice-Based Research and the Imperative Role of Design Practitioners.

PubMed

Freihoefer, Kara; Zborowsky, Terri

2017-04-01

The purpose of this article is to justify the need for evidence-based design (EBD) in a research-based architecture and design practice. This article examines the current state of practice-based research (PBR), supports the need for EBD, illustrates PBR methods that can be applied to design work, and explores how findings can be used as a decision-making tool during design and as a validation tool during postoccupancy. As a result, design professions' body of knowledge will advance and practitioners will be better informed to protect the health, safety, and welfare of the society. Furthermore, characteristics of Friedman's progressive research program are used as a framework to examine the current state of PBR in design practice. A modified EBD approach is proposed and showcased with a case study of a renovated inpatient unit. The modified approach demonstrates how a highly integrated project team, especially the role of design practitioners, contributed to the success of utilizing baseline findings and evidence in decision-making throughout the design process. Lastly, recommendations and resources for learning research concepts are provided for practitioners. It is the role of practitioners to pave the way for the next generation of design professionals, as the request and expectation for research become more prevalent in design practice.

Advances in phakic intraocular lenses: indications, efficacy, safety, and new designs.

PubMed

Alio, Jorge L

2004-08-01

The recent evolution of phakic intraocular lenses (PIOLs) has made this refractive surgical technique safer, very predictable, and effective. Due to these reasons, PIOLs have been expanding the horizon of their indications. The aim of this review is to update the reader in the recent advances reported on the topic during the year 2003. The most recent progress has been made towards decreasing the incision size down to 3 mm or less for all PIOLs models to avoid pupil ovalling in angle-supported designs with new biomaterials or exchangeable haptics, and to decrease the incidence of cataract induction in posterior chamber models with modified designs and better sizing. High-order aberrations and the quality of vision are improved with PIOLs. The main limitation for the further development of PIOLs is the lack of adequate diagnostic imaging techniques to perform a precise preoperative study of the anterior segment anatomy. Emerging diagnostic technologies based on the use of very high frequency (100 MHz) ultrasound and optical coherence tomography seem to have a most important role in the future development of PIOLs defining preoperatively the most adequate anatomic conditions for each design. PIOLs offer today an excellent alternative for the correction of high and moderate myopia, hyperopia, and astigmatism. Emerging indications, still under investigation, include presbyopia and pediatric anisometropic amblyopia. Due to their advantages for quality of vision and the increased knowledge on their safety, as well as the evidence of their predictability, PIOLs are expected to largely increase their clinical use as a refractive surgical technique in the coming years.

Ab initio chemical safety assessment: A workflow based on exposure considerations and non-animal methods.

PubMed

Berggren, Elisabet; White, Andrew; Ouedraogo, Gladys; Paini, Alicia; Richarz, Andrea-Nicole; Bois, Frederic Y; Exner, Thomas; Leite, Sofia; Grunsven, Leo A van; Worth, Andrew; Mahony, Catherine

2017-11-01

We describe and illustrate a workflow for chemical safety assessment that completely avoids animal testing. The workflow, which was developed within the SEURAT-1 initiative, is designed to be applicable to cosmetic ingredients as well as to other types of chemicals, e.g. active ingredients in plant protection products, biocides or pharmaceuticals. The aim of this work was to develop a workflow to assess chemical safety without relying on any animal testing, but instead constructing a hypothesis based on existing data, in silico modelling, biokinetic considerations and then by targeted non-animal testing. For illustrative purposes, we consider a hypothetical new ingredient x as a new component in a body lotion formulation. The workflow is divided into tiers in which points of departure are established through in vitro testing and in silico prediction, as the basis for estimating a safe external dose in a repeated use scenario. The workflow includes a series of possible exit (decision) points, with increasing levels of confidence, based on the sequential application of the Threshold of Toxicological (TTC) approach, read-across, followed by an "ab initio" assessment, in which chemical safety is determined entirely by new in vitro testing and in vitro to in vivo extrapolation by means of mathematical modelling. We believe that this workflow could be applied as a tool to inform targeted and toxicologically relevant in vitro testing, where necessary, and to gain confidence in safety decision making without the need for animal testing.

Efficient runner safety assessment during early design phase and root cause analysis

NASA Astrophysics Data System (ADS)

Liang, Q. W.; Lais, S.; Gentner, C.; Braun, O.

2012-11-01

Fatigue related problems in Francis turbines, especially high head Francis turbines, have been published several times in the last years. During operation the runner is exposed to various steady and unsteady hydraulic loads. Therefore the analysis of forced response of the runner structure requires a combined approach of fluid dynamics and structural dynamics. Due to the high complexity of the phenomena and due to the limitation of computer power, the numerical prediction was in the past too expensive and not feasible for the use as standard design tool. However, due to continuous improvement of the knowledge and the simulation tools such complex analysis has become part of the design procedure in ANDRITZ HYDRO. This article describes the application of most advanced analysis techniques in runner safety check (RSC), including steady state CFD analysis, transient CFD analysis considering rotor stator interaction (RSI), static FE analysis and modal analysis in water considering the added mass effect, in the early design phase. This procedure allows a very efficient interaction between the hydraulic designer and the mechanical designer during the design phase, such that a risk of failure can be detected and avoided in an early design stage.The RSC procedure can also be applied to a root cause analysis (RCA) both to find out the cause of failure and to quickly define a technical solution to meet the safety criteria. An efficient application to a RCA of cracks in a Francis runner is quoted in this article as an example. The results of the RCA are presented together with an efficient and inexpensive solution whose effectiveness could be proven again by applying the described RSC technics. It is shown that, with the RSC procedure developed and applied as standard procedure in ANDRITZ HYDRO such a failure is excluded in an early design phase. Moreover, the RSC procedure is compatible with different commercial and open source codes and can be easily adapted to apply for

Fire safety design considerations for advanced space vehicles

NASA Technical Reports Server (NTRS)

1988-01-01

The desire to understand and explore space has driven man to overcome the confines of the Earth's atmosphere and accept the challenge of spaceflight. With our increasing ability to travel, work, and explore in space comes a need for a better understanding of the hazards in this relatively new endeavor. One of the most important and immediate needs is to be able to predict the ignition, spread, and growth of fire on board spacecraft. Fire safety aboard spacecraft has always been a concern; however, with the increasing number and duration of proposed missions, it is imperative that the spacecraft be designed with a solid understanding of fire hazards, insuring that all risks have been minimized and extinguishment systems are available.

Managing risk in healthcare: understanding your safety culture using the Manchester Patient Safety Framework (MaPSaF).

PubMed

Parker, Dianne

2009-03-01

To provide sufficient information about the Manchester Patient Safety Framework (MaPSaF) to allow healthcare professionals to assess its potential usefulness. The assessment of safety culture is an important aspect of risk management, and one in which there is increasing interest among healthcare organizations. Manchester Patient Safety Framework offers a theory-based framework for assessing safety culture, designed specifically for use in the NHS. The framework covers multiple dimensions of safety culture, and five levels of safety culture development. This allows the generation of a profile of an organization's safety culture in terms of areas of relative strength and challenge, which can be used to identify focus issues for change and improvement. Manchester Patient Safety Framework provides a useful method for engaging healthcare professionals in assessing and improving the safety culture in their organization, as part of a programme of risk management.

Evolution of Space Shuttle Range Safety Ascent Flight Envelope Design

NASA Technical Reports Server (NTRS)

Brewer, Joan; Davis, Jerel; Glenn, Christopher

2011-01-01

For every space vehicle launch from the Eastern Range in Florida, the range user must provide specific Range Safety (RS) data products to the Air Force's 45th Space Wing in order to obtain flight plan approval. One of these data products is a set of RS ascent flight envelope trajectories that define the normal operating region of the vehicle during powered flight. With the Shuttle Program launching 135 manned missions over a 30-year period, 135 envelope sets were delivered to the range. During this time, the envelope methodology and design process evolved to support mission changes, maintain high data quality, and reduce costs. The purpose of this document is to outline the shuttle envelope design evolution and capture the lessons learned that could apply to future spaceflight endeavors.

Planning and design for a culture of safety in Thessaloniki's hospitals.

PubMed

Chatzicocoli-Syrakou, Sophia; Syrakoy, Athena-Christina

2004-01-01

Thessaloniki is the second capital of Greece, located in the region of Macedonia, in the northern part of the Greek mainland. After the opening of the boarders of the former 'Eastern Block' countries and following their general open-policy to the European Union, Thessaloniki became an important part of the Balkans Initiative, aiming at attracting patients from abroad to Greece. Thus, some of the most modern hospitals in Greece are near Thessaloniki. Patient safety forms an important issue of the policy attracting patients. With this paper an attempt will be made to examine the characteristics of a culture of safety embodied in the planning and design of two of Thessaloniki's hospitals. These characteristics are to be found in the health care environment of the present clinical processes, on both, a quantitative and a qualitatve basis, and finally, suggestions for further development.

Office-based anesthesia: new frontiers, better outcomes, and emphasis on safety.

PubMed

Desai, Meena S

2008-12-01

Office-based anesthesia has grown and continues to grow very rapidly in the ever-changing medical environment. The demand of patients, surgeons and the evolving economic environment has set off a dynamic growth explosion. This explosion has created aggressive and tumultuous enhancements, some of which have been adapted well and some of which have led to disastrous results. As we institute rules and regulations to govern this 'wild west' of anesthesia, the landscape is set with some new guidelines that continue to evolve.Practice recommendations have been outlined for fire safety especially on patient fires. Closed claim studies offer valuable recommendations for MAC claims in the office based setting. Anesthesia Patient Safety Foundation and the ASA have outlined valuable information regarding the nonsilencing of equipment alarms.New equipment enhancements have generated successful mobile general anesthesia platforms. Finally, as we forge ahead we must construct measurements of our safety and success as outcome parameters are developed. The review of recent literature and technological advances has provided some valuable lessons in the evolution of patient safety and office based technology for the surgical office-based environment. As this specialty grows, measures of its outcome parameters will allow a gauge of performance.

Toward a Safety Risk-Based Classification of Unmanned Aircraft

NASA Technical Reports Server (NTRS)

Torres-Pomales, Wilfredo

2016-01-01

There is a trend of growing interest and demand for greater access of unmanned aircraft (UA) to the National Airspace System (NAS) as the ongoing development of UA technology has created the potential for significant economic benefits. However, the lack of a comprehensive and efficient UA regulatory framework has constrained the number and kinds of UA operations that can be performed. This report presents initial results of a study aimed at defining a safety-risk-based UA classification as a plausible basis for a regulatory framework for UA operating in the NAS. Much of the study up to this point has been at a conceptual high level. The report includes a survey of contextual topics, analysis of safety risk considerations, and initial recommendations for a risk-based approach to safe UA operations in the NAS. The next phase of the study will develop and leverage deeper clarity and insight into practical engineering and regulatory considerations for ensuring that UA operations have an acceptable level of safety.

Safety and efficacy evaluation of gelatin-based nanoparticles associated with UV filters.

PubMed

Oliveira, Camila Areias de; Dario, Michelli Ferrera; Sarruf, Fernanda Daud; Mariz, Inês Fátima Afonso; Velasco, Maria Valéria Robles; Rosado, Catarina; Baby, André Rolim

2016-04-01

The safety and efficacy assessment of nanomaterials is a major concern of industry and academia. These materials, due to their nanoscale size, can have chemical, physical, and biological properties that differ from those of their larger counterparts. The encapsulation of natural ingredients can provide marked improvements in sun protection efficacy. This strategy promotes solubility enhancement of flavonoids and yields an improved active ingredient with innovative physical, physicochemical and functional characteristics. Rutin, a flavonoid, has chemical and functional stability in topical vehicles exerting a synergistic effect in association with ultraviolet (UV) filters. However, the solubility of rutin is a limiting factor. Additionally, this bioactive compound does not have tendency to permeate across the stratum corneum. As an alternative to common synthetic based sunscreens, rutin-entrapped gelatin nanoparticles were designed. The present study investigated the pre-clinical safety of gelatin nanoparticles (GNPs) using an in vitro method and also assessed the clinical safety and efficacy of the association of GNPs with three commonly used chemical UV filters (ethylhexyl dimethyl PABA, ethylhexyl methoxycinnamate and methoxydibenzoylmethane). The non-irritant and adequate safety profile under sun-exposed skin conditions of the nanomaterials and the emulsions qualified the products for clinical efficacy assays. The in vivo results indicated that the GNPs increased the antioxidant protection of the emulsions developed. However, the presence of rutin in the nanosized material did not enhance performance on the SPF test. In conclusion, these findings characterized the nanomaterials as an innovative platform for multifunctional bioactive sunscreens. Copyright © 2015 Elsevier B.V. All rights reserved.

A Most Probable Point-Based Method for Reliability Analysis, Sensitivity Analysis and Design Optimization

NASA Technical Reports Server (NTRS)

Hou, Gene J.-W; Newman, Perry A. (Technical Monitor)

2004-01-01

A major step in a most probable point (MPP)-based method for reliability analysis is to determine the MPP. This is usually accomplished by using an optimization search algorithm. The minimum distance associated with the MPP provides a measurement of safety probability, which can be obtained by approximate probability integration methods such as FORM or SORM. The reliability sensitivity equations are derived first in this paper, based on the derivatives of the optimal solution. Examples are provided later to demonstrate the use of these derivatives for better reliability analysis and reliability-based design optimization (RBDO).

Safety of soya-based infant formulas in children.

PubMed

Vandenplas, Yvan; Castrellon, Pedro Gutierrez; Rivas, Rodolfo; Gutiérrez, Carlos Jimenez; Garcia, Luisa Diaz; Jimenez, Juliana Estevez; Anzo, Anahi; Hegar, Badriul; Alarcon, Pedro

2014-04-28

Soya-based infant formulas (SIF) containing soya flour were introduced almost 100 years ago. Modern soya formulas are used in allergy/intolerance to cows' milk-based formulas (CMF), post-infectious diarrhoea, lactose intolerance and galactosaemia, as a vegan human milk (HM) substitute, etc. The safety of SIF is still debated. In the present study, we reviewed the safety of SIF in relation to anthropometric growth, bone health (bone mineral content), immunity, cognition, and reproductive and endocrine functions. The present review includes cross-sectional, case-control, cohort studies or clinical trials that were carried out in children fed SIF compared with those fed other types of infant formulas and that measured safety. The databases that were searched included PubMed (1909 to July 2013), Embase (1988 to May 2013), LILACS (1990 to May 2011), ARTEMISA (13th edition, December 2012), Cochrane controlled trials register, Bandolier and DARE using the Cochrane methodology. Wherever possible, a meta-analysis was carried out. We found that the anthropometric patterns of children fed SIF were similar to those of children fed CMF or HM. Despite the high levels of phytates and aluminium in SIF, Hb, serum protein, Zn and Ca concentrations and bone mineral content were found to be similar to those of children fed CMF or HM. We also found the levels of genistein and daidzein to be higher in children fed SIF; however, we did not find strong evidence of a negative effect on reproductive and endocrine functions. Immune measurements and neurocognitive parameters were similar in all the feeding groups. In conclusion, modern SIF are evidence-based safety options to feed children requiring them. The patterns of growth, bone health and metabolic, reproductive, endocrine, immune and neurological functions are similar to those observed in children fed CMF or HM.

Early Engagement of Safety and Mission Assurance Expertise Using Systems Engineering Tools: A Risk-Based Approach to Early Identification of Safety and Assurance Requirements

NASA Technical Reports Server (NTRS)

Darpel, Scott; Beckman, Sean

2016-01-01

Decades of systems engineering practice have demonstrated that the earlier the identification of requirements occurs, the lower the chance that costly redesigns will needed later in the project life cycle. A better understanding of all requirements can also improve the likelihood of a design's success. Significant effort has been put into developing tools and practices that facilitate requirements determination, including those that are part of the model-based systems engineering (MBSE) paradigm. These efforts have yielded improvements in requirements definition, but have thus far focused on a design's performance needs. The identification of safety & mission assurance (S&MA) related requirements, in comparison, can occur after preliminary designs are already established, yielding forced redesigns. Engaging S&MA expertise at an earlier stage, facilitated by the use of MBSE tools, and focused on actual project risk, can yield the same type of design life cycle improvements that have been realized in technical and performance requirements.

Design, operation, and safety of single-room interventional MRI suites: practical experience from two centers.

PubMed

White, Mark J; Thornton, John S; Hawkes, David J; Hill, Derek L G; Kitchen, Neil; Mancini, Laura; McEvoy, Andrew W; Razavi, Reza; Wilson, Sally; Yousry, Tarek; Keevil, Stephen F

2015-01-01

The design and operation of a facility in which a magnetic resonance imaging (MRI) scanner is incorporated into a room used for surgical or endovascular cardiac interventions presents several challenges. MR safety must be maintained in the presence of a much wider variety of equipment than is found in a diagnostic unit, and of staff unfamiliar with the MRI environment, without compromising the safety and practicality of the interventional procedure. Both the MR-guided cardiac interventional unit at Kings College London and the intraoperative imaging suite at the National Hospital for Neurology and Neurosurgery are single-room interventional facilities incorporating 1.5 T cylindrical-bore MRI scanners. The two units employ similar strategies to maintain MR safety, both in original design and day-to-day operational workflows, and between them over a decade of incident-free practice has been accumulated. This article outlines these strategies, highlighting both similarities and differences between the units, as well as some lessons learned and resulting procedural changes made in both units since installation. © 2014 Wiley Periodicals, Inc.

Safety analysis in test facility design

NASA Astrophysics Data System (ADS)

Valk, A.; Jonker, R. J.

1990-09-01

The application of safety analysis techniques as developed in, for example nuclear and petrochemical industry, can be very beneficial in coping with the increasing complexity of modern test facility installations and their operations. To illustrate the various techniques available and their phasing in a project, an overview of the most commonly used techniques is presented. Two case studies are described: the hazard and operability study techniques and safety zoning in relation to the possible presence of asphyxiating atmospheres.

Decision making with epistemic uncertainty under safety constraints: An application to seismic design

USGS Publications Warehouse

Veneziano, D.; Agarwal, A.; Karaca, E.

2009-01-01

The problem of accounting for epistemic uncertainty in risk management decisions is conceptually straightforward, but is riddled with practical difficulties. Simple approximations are often used whereby future variations in epistemic uncertainty are ignored or worst-case scenarios are postulated. These strategies tend to produce sub-optimal decisions. We develop a general framework based on Bayesian decision theory and exemplify it for the case of seismic design of buildings. When temporal fluctuations of the epistemic uncertainties and regulatory safety constraints are included, the optimal level of seismic protection exceeds the normative level at the time of construction. Optimal Bayesian decisions do not depend on the aleatory or epistemic nature of the uncertainties, but only on the total (epistemic plus aleatory) uncertainty and how that total uncertainty varies randomly during the lifetime of the project. ?? 2009 Elsevier Ltd. All rights reserved.

Probabilistic safety assessment of the design of a tall buildings under the extreme load

DOE Office of Scientific and Technical Information (OSTI.GOV)

Králik, Juraj, E-mail: juraj.kralik@stuba.sk

2016-06-08

The paper describes some experiences from the deterministic and probabilistic analysis of the safety of the tall building structure. There are presented the methods and requirements of Eurocode EN 1990, standard ISO 2394 and JCSS. The uncertainties of the model and resistance of the structures are considered using the simulation methods. The MONTE CARLO, LHS and RSM probabilistic methods are compared with the deterministic results. On the example of the probability analysis of the safety of the tall buildings is demonstrated the effectiveness of the probability design of structures using Finite Element Methods.

Probabilistic safety assessment of the design of a tall buildings under the extreme load

NASA Astrophysics Data System (ADS)

Králik, Juraj

2016-06-01

The paper describes some experiences from the deterministic and probabilistic analysis of the safety of the tall building structure. There are presented the methods and requirements of Eurocode EN 1990, standard ISO 2394 and JCSS. The uncertainties of the model and resistance of the structures are considered using the simulation methods. The MONTE CARLO, LHS and RSM probabilistic methods are compared with the deterministic results. On the example of the probability analysis of the safety of the tall buildings is demonstrated the effectiveness of the probability design of structures using Finite Element Methods.

DEVELOPMENT OF A SAFETY COMMUNICATION AND RECOGNITION PROGRAM FOR CONSTRUCTION

PubMed Central

SPARER, EMILY H.; HERRICK, ROBERT F.; DENNERLEIN, JACK T.

2017-01-01

Leading-indicator–based (e.g., hazard recognition) incentive programs provide an alternative to controversial lagging-indicator–based (e.g., injury rates) programs. We designed a leading-indicator–based safety communication and recognition program that incentivized safe working conditions. The program was piloted for two months on a commercial construction worksite, and then redesigned using qualitative interview and focus group data from management and workers. We then ran the redesigned program for six months on the same worksite. Foremen received detailed weekly feedback from safety inspections, and posters displayed worksite and subcontractor safety scores. In the final program design, the whole site, not individual subcontractors, was the unit of analysis and recognition. This received high levels of acceptance from workers, who noted increased levels of site unity and team-building. This pilot program showed that construction workers value solidarity with others on site, demonstrating the importance of health and safety programs that engage all workers through a reliable and consistent communication infrastructure. PMID:25815741

Incorporating organisational safety culture within ergonomics practice.

PubMed

Bentley, Tim; Tappin, David

2010-10-01

This paper conceptualises organisational safety culture and considers its relevance to ergonomics practice. Issues discussed in the paper include the modest contribution that ergonomists and ergonomics as a discipline have made to this burgeoning field of study and the significance of safety culture to a systems approach. The relevance of safety culture to ergonomics work with regard to the analysis, design, implementation and evaluation process, and implications for participatory ergonomics approaches, are also discussed. A potential user-friendly, qualitative approach to assessing safety culture as part of ergonomics work is presented, based on a recently published conceptual framework that recognises the dynamic and multi-dimensional nature of safety culture. The paper concludes by considering the use of such an approach, where an understanding of different aspects of safety culture within an organisation is seen as important to the success of ergonomics projects. STATEMENT OF RELEVANCE: The relevance of safety culture to ergonomics practice is a key focus of this paper, including its relationship with the systems approach, participatory ergonomics and the ergonomics analysis, design, implementation and evaluation process. An approach to assessing safety culture as part of ergonomics work is presented.

Integrated vehicle-based safety systems : third annual report.

DOT National Transportation Integrated Search

2009-10-01

The Integrated Vehicle-Based Safety Systems (IVBSS) program is a five-year, two-phase cooperative : research program being conducted by an industry consortium led by the University of Michigan : Transportation Research Institute (UMTRI). The goal of ...

Design of the flame detector based on pyroelectric infrared sensor

NASA Astrophysics Data System (ADS)

Liu, Yang; Yu, Benhua; Dong, Lei; Li, Kai

2017-10-01

As a fire detection device, flame detector has the advantages of short reaction time and long distance. Based on pyroelectric infrared sensor working principle, the passive pyroelectric infrared alarm system is designed, which is mainly used for safety of tunnel to detect whether fire occurred or not. Modelling and Simulation of the pyroelectric Detector Using Labview. An attempt was made to obtain a simple test platform of a pyroelectric detector which would make an excellent basis for the analysis of its dynamic behaviour. After many experiments, This system has sensitive response, high anti-interference ability and safe and reliable performance.

Implementing evidence-based policy in a network setting: road safety policy in the Netherlands.

PubMed

Bax, Charlotte; de Jong, Martin; Koppenjan, Joop

2010-01-01

In the early 1990s, in order to improve road safety in The Netherlands, the Institute for Road Safety Research (SWOV) developed an evidence-based "Sustainable Safety" concept. Based on this concept, Dutch road safety policy, was seen as successful and as a best practice in Europe. In The Netherlands, the policy context has now changed from a sectoral policy setting towards a fragmented network in which safety is a facet of other transport-related policies. In this contribution, it is argued that the implementation strategy underlying Sustainable Safety should be aligned with the changed context. In order to explore the adjustments needed, two perspectives of policy implementation are discussed: (1) national evidence-based policies with sectoral implementation; and (2) decentralized negotiation on transport policy in which road safety is but one aspect. We argue that the latter approach matches the characteristics of the newly evolved policy context best, and conclude with recommendations for reformulating the implementation strategy.

Integrated Vehicle-Based Safety Systems Third Annual Report

DOT National Transportation Integrated Search

2009-10-01

The Integrated Vehicle-Based Safety Systems (IVBSS) program is a five-year, two-phase cooperative research program being conducted by an industry consortium led by the University of Michigan Transportation Research Institute (UMTRI). The goal of the ...

Drug safety data mining with a tree-based scan statistic.

PubMed

Kulldorff, Martin; Dashevsky, Inna; Avery, Taliser R; Chan, Arnold K; Davis, Robert L; Graham, David; Platt, Richard; Andrade, Susan E; Boudreau, Denise; Gunter, Margaret J; Herrinton, Lisa J; Pawloski, Pamala A; Raebel, Marsha A; Roblin, Douglas; Brown, Jeffrey S

2013-05-01

In post-marketing drug safety surveillance, data mining can potentially detect rare but serious adverse events. Assessing an entire collection of drug-event pairs is traditionally performed on a predefined level of granularity. It is unknown a priori whether a drug causes a very specific or a set of related adverse events, such as mitral valve disorders, all valve disorders, or different types of heart disease. This methodological paper evaluates the tree-based scan statistic data mining method to enhance drug safety surveillance. We use a three-million-member electronic health records database from the HMO Research Network. Using the tree-based scan statistic, we assess the safety of selected antifungal and diabetes drugs, simultaneously evaluating overlapping diagnosis groups at different granularity levels, adjusting for multiple testing. Expected and observed adverse event counts were adjusted for age, sex, and health plan, producing a log likelihood ratio test statistic. Out of 732 evaluated disease groupings, 24 were statistically significant, divided among 10 non-overlapping disease categories. Five of the 10 signals are known adverse effects, four are likely due to confounding by indication, while one may warrant further investigation. The tree-based scan statistic can be successfully applied as a data mining tool in drug safety surveillance using observational data. The total number of statistical signals was modest and does not imply a causal relationship. Rather, data mining results should be used to generate candidate drug-event pairs for rigorous epidemiological studies to evaluate the individual and comparative safety profiles of drugs. Copyright © 2013 John Wiley & Sons, Ltd.

A toxicity-based method for evaluating safety of reclaimed water for environmental reuses.

PubMed

Xu, Jianying; Zhao, Chuntao; Wei, Dongbin; Du, Yuguo

2014-10-01

A large quantity of toxic chemical pollutants possibly remains in reclaimed water due to the limited removal efficiency in traditional reclamation processes. It is not enough to guarantee the safety of reclaimed water using conventional water quality criteria. An integrated assessment method based on toxicity test is necessary to vividly depict the safety of reclaimed water for reuse. A toxicity test battery consisting of lethality, genotoxicity and endocrine disrupting effect was designed to screen the multiple biological effects of residual toxic chemicals in reclaimed water. The toxicity results of reclaimed water were converted into the equivalent concentrations of the corresponding positive reference substances (EQC). Simultaneously, the predicted no-effect concentration (PNEC) of each positive reference substance was obtained by analyzing the species sensitivity distribution (SSD) of toxicity data. An index "toxicity score" was proposed and valued as 1, 2, 3, or 4 depending on the ratio of the corresponding EQC to PNEC. For vividly ranking the safety of reclaimed water, an integrated assessment index "toxicity rank" was proposed, which was classified into A, B, C, or D rank with A being the safest. The proposed method was proved to be effective in evaluating reclaimed water samples in case studies. Copyright © 2014. Published by Elsevier B.V.

Usability and Safety in Electronic Medical Records Interface Design: A Review of Recent Literature and Guideline Formulation.

PubMed

Zahabi, Maryam; Kaber, David B; Swangnetr, Manida

2015-08-01

The objectives of this study were to (a) review electronic medical record (EMR) and related electronic health record (EHR) interface usability issues, (b) review how EMRs have been evaluated with safety analysis techniques along with any hazard recognition, and (c) formulate design guidelines and a concept for enhanced EMR interfaces with a focus on diagnosis and documentation processes. A major impact of information technology in health care has been the introduction of EMRs. Although numerous studies indicate use of EMRs to increase health care quality, there remain concerns with usability issues and safety. A literature search was conducted using Compendex, PubMed, CINAHL, and Web of Science databases to find EMR research published since 2000. Inclusion criteria included relevant English-language papers with subsets of keywords and any studies (manually) identified with a focus on EMR usability. Fifty studies met the inclusion criteria. Results revealed EMR and EHR usability problems to include violations of natural dialog, control consistency, effective use of language, effective information presentation, and customization principles as well as a lack of error prevention, minimization of cognitive load, and feedback. Studies focusing on EMR system safety made no objective assessments and applied only inductive reasoning methods for hazard recognition. On the basis of the identified usability problems and structure of safety analysis techniques, we provide EMR design guidelines and a design concept focused on the diagnosis process and documentation. The design guidelines and new interface concept can be used for prototyping and testing enhanced EMRs. © 2015, Human Factors and Ergonomics Society.

Recent Progresses in Nanobiosensing for Food Safety Analysis

PubMed Central

Yang, Tao; Huang, Huifen; Zhu, Fang; Lin, Qinlu; Zhang, Lin; Liu, Junwen

2016-01-01

With increasing adulteration, food safety analysis has become an important research field. Nanomaterials-based biosensing holds great potential in designing highly sensitive and selective detection strategies necessary for food safety analysis. This review summarizes various function types of nanomaterials, the methods of functionalization of nanomaterials, and recent (2014–present) progress in the design and development of nanobiosensing for the detection of food contaminants including pathogens, toxins, pesticides, antibiotics, metal contaminants, and other analytes, which are sub-classified according to various recognition methods of each analyte. The existing shortcomings and future perspectives of the rapidly growing field of nanobiosensing addressing food safety issues are also discussed briefly. PMID:27447636

Recent Progresses in Nanobiosensing for Food Safety Analysis.

PubMed

Yang, Tao; Huang, Huifen; Zhu, Fang; Lin, Qinlu; Zhang, Lin; Liu, Junwen

2016-07-19

With increasing adulteration, food safety analysis has become an important research field. Nanomaterials-based biosensing holds great potential in designing highly sensitive and selective detection strategies necessary for food safety analysis. This review summarizes various function types of nanomaterials, the methods of functionalization of nanomaterials, and recent (2014-present) progress in the design and development of nanobiosensing for the detection of food contaminants including pathogens, toxins, pesticides, antibiotics, metal contaminants, and other analytes, which are sub-classified according to various recognition methods of each analyte. The existing shortcomings and future perspectives of the rapidly growing field of nanobiosensing addressing food safety issues are also discussed briefly.

Protocol for a mixed-methods study on leader-based interventions in construction contractors' safety commitments.

PubMed

Pedersen, Betina Holbaek; Dyreborg, Johnny; Kines, Pete; Mikkelsen, Kim Lyngby; Hannerz, Harald; Andersen, Dorte Raaby; Spangenberg, Søren

2010-06-01

Owing to high injury rates, safety interventions are needed in the construction industry. Evidence-based interventions tailored to this industry are, however, scarce. Leader-based safety interventions have proven more effective than worker-based interventions in other industries. To test a leader-based safety intervention for construction sites. The intervention consists of encouraging safety coordinators to provide feedback on work safety to the client and line management. The intention is to increase communication and interactions regarding safety within the line management and between the client and the senior management. It is hypothesised that this, in turn, will lead to increased communication and interaction about safety between management and coworkers as well as an increased on-site safety level. A group-randomised double-blinded case study of six Danish construction sites (three intervention sites and three control sites). The recruitment of the construction sites is performed continuously from January 2010 to June 2010. The investigation of each site lasts 20 continuous weeks. Confirmatory statistical analysis is used to test if the safety level increased, and if the probability of safety communications between management and coworkers increases as a consequence of the intervention. The data collection will be blinded. Qualitative methods are used to evaluate if communication and interactions about safety at all managerial levels, including the client, increase. (1) The proportion of safety-related communications out of all studied communications between management and coworkers. (2) The safety level index of the construction sites.

Safety belt promotion: theory and practice.

PubMed

Nelson, G D; Moffit, P B

1988-02-01

The purpose of this paper is to provide practitioners a rationale and description of selected theoretically based approaches to safety belt promotion. Theory failure is a threat to the integrity and effectiveness of safety belt promotion. The absence of theory driven programs designed to promote safety belt use is a concern of this paper. Six theoretical models from the social and behavioral sciences are reviewed with suggestions for application to promoting safety belt use and include Theory of Reasoned Action, the Health Belief Model, Fear Arousal, Operant Learning, Social Learning Theory, and Diffusion of Innovations. Guidelines for the selection and utilization of theory are discussed.

Final safety analysis report for the Galileo Mission: Volume 1, Reference design document

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The Galileo mission uses nuclear power sources called Radioisotope Thermoelectric Generators (RTGs) to provide the spacecraft's primary electrical power. Because these generators contain nuclear material, a Safety Analysis Report (SAR) is required. A preliminary SAR and an updated SAR were previously issued that provided an evolving status report on the safety analysis. As a result of the Challenger accident, the launch dates for both Galileo and Ulysses missions were later rescheduled for November 1989 and October 1990, respectively. The decision was made by agreement between the DOE and the NASA to have a revised safety evaluation and report (FSAR) preparedmore » on the basis of these revised vehicle accidents and environments. The results of this latest revised safety evaluation are presented in this document (Galileo FSAR). Volume I, this document, provides the background design information required to understand the analyses presented in Volumes II and III. It contains descriptions of the RTGs, the Galileo spacecraft, the Space Shuttle, the Inertial Upper Stage (IUS), the trajectory and flight characteristics including flight contingency modes, and the launch site. There are two appendices in Volume I which provide detailed material properties for the RTG.« less

Integrated vehicle-based safety systems : first annual report

DOT National Transportation Integrated Search

2007-10-01

The IVBSS (Integrated Vehicle-Based Safety Systems) program is a four-year, two phase cooperative research program being conducted by an industry team led by the University of Michigan Transportation Research Institute (UMTRI). The program began in N...

Safety in the Air: A Curriculum about Flight and Air Traffic Control Designed for Middle School Students.

ERIC Educational Resources Information Center

Colton, Ted

This six-lesson unit is designed to familiarize sixth, seventh, and eighth grade students with air traffic safety and the individuals who make air traffic safety possible. Each lesson consists of a statement of the concept fostered, a list of objectives, a brief discussion on the focus of the unit, and instructional strategies for lesson topics…

Initial development of prototype performance model for highway design

DOT National Transportation Integrated Search

1997-12-01

The Federal Highway Administration (FHWA) has undertaken a multiyear project to develop the Interactive Highway Safety Design Model (IHSDM), which is a CADD-based integrated set of software tools to analyze a highway design to identify safety issues ...

SU-E-T-785: Using Systems Engineering to Design HDR Skin Treatment Operation for Small Lesions to Enhance Patient Safety

DOE Office of Scientific and Technical Information (OSTI.GOV)

Saw, C; Baikadi, M; Peters, C

2015-06-15

Purpose: Using systems engineering to design HDR skin treatment operation for small lesions using shielded applicators to enhance patient safety. Methods: Systems engineering is an interdisciplinary field that offers formal methodologies to study, design, implement, and manage complex engineering systems as a whole over their life-cycles. The methodologies deal with human work-processes, coordination of different team, optimization, and risk management. The V-model of systems engineering emphasize two streams, the specification and the testing streams. The specification stream consists of user requirements, functional requirements, and design specifications while the testing on installation, operational, and performance specifications. In implementing system engineering tomore » this project, the user and functional requirements are (a) HDR unit parameters be downloaded from the treatment planning system, (b) dwell times and positions be generated by treatment planning system, (c) source decay be computer calculated, (d) a double-check system of treatment parameters to comply with the NRC regulation. These requirements are intended to reduce human intervention to improve patient safety. Results: A formal investigation indicated that the user requirements can be satisfied. The treatment operation consists of using the treatment planning system to generate a pseudo plan that is adjusted for different shielded applicators to compute the dwell times. The dwell positions, channel numbers, and the dwell times are verified by the medical physicist and downloaded into the HDR unit. The decayed source strength is transferred to a spreadsheet that computes the dwell times based on the type of applicators and prescribed dose used. Prior to treatment, the source strength, dwell times, dwell positions, and channel numbers are double-checked by the radiation oncologist. No dosimetric parameters are manually calculated. Conclusion: Systems engineering provides methodologies to

[Design, implementation and evaluation of a management model of patient safety in hospitals in Catalonia, Spain].

PubMed

Saura, Rosa Maria; Moreno, Pilar; Vallejo, Paula; Oliva, Glòria; Alava, Fernando; Esquerra, Miquel; Davins, Josep; Vallès, Roser; Bañeres, Joaquim

2014-07-01

Since its inception in 2006, the Alliance for Patient Safety in Catalonia has played a major role in promoting and shaping a series of projects related to the strategy of the Ministry of Health, Social Services and Equality, for improving patient safety. One such project was the creation of functional units or committees of safety in hospitals in order to facilitate the management of patient safety. The strategy has been implemented in hospitals in Catalonia which were selected based on criteria of representativeness. The intervention was based on two lines of action, one to develop the model framework and the other for its development. Firstly the strategy for safety management based on EFQM (European Foundation for Quality Management) was defined with the development of standards, targets and indicators to implement security while the second part involved the introduction of tools, methodologies and knowledge to the management support of patient safety and risk prevention. The project was developed in four hospital areas considered higher risk, each assuming six goals for safety management. Some of these targets such as the security control panel or system of adverse event reporting were shared. 23 hospitals joined the project in Catalonia. Despite the different situations in each centre, high compliance was achieved in the development of the objectives. In each of the participating areas the security control panel was developed. Stable structures for safety management were established or strengthened. Training in patient safety played and important role, 1415 professionals participated. Through these kind of projects not only have been introduced programs of proven effectiveness in reducing risks, but they also provide to the facilities a work system that allows autonomy in diagnosis and analysis of the different risk situations or centre specific safety issues. Copyright © 2014. Published by Elsevier Espana.

On Building an Ontological Knowledge Base for Managing Patient Safety Events.

PubMed

Liang, Chen; Gong, Yang

2015-01-01

Over the past decade, improving healthcare quality and safety through patient safety event reporting systems has drawn much attention. Unfortunately, such systems are suffering from low data quality, inefficient data entry and ineffective information retrieval. For improving the systems, we develop a semantic web ontology based on the WHO International Classification for Patient Safety (ICPS) and AHRQ Common Formats for patient safety event reporting. The ontology holds potential in enhancing knowledge management and information retrieval, as well as providing flexible data entry and case analysis for both reporters and reviewers of patient safety events. In this paper, we detailed our efforts in data acquisition, transformation, implementation and initial evaluation of the ontology.

Causal Relationship Analysis of the Patient Safety Culture Based on Safety Attitudes Questionnaire in Taiwan.

PubMed

Lee, Yii-Ching; Zeng, Pei-Shan; Huang, Chih-Hsuan; Wu, Hsin-Hung

2018-01-01

This study uses the decision-making trial and evaluation laboratory method to identify critical dimensions of the safety attitudes questionnaire in Taiwan in order to improve the patient safety culture from experts' viewpoints. Teamwork climate, stress recognition, and perceptions of management are three causal dimensions, while safety climate, job satisfaction, and working conditions are receiving dimensions. In practice, improvements on effect-based dimensions might receive little effects when a great amount of efforts have been invested. In contrast, improving a causal dimension not only improves itself but also results in better performance of other dimension(s) directly affected by this particular dimension. Teamwork climate and perceptions of management are found to be the most critical dimensions because they are both causal dimensions and have significant influences on four dimensions apiece. It is worth to note that job satisfaction is the only dimension affected by the other dimensions. In order to effectively enhance the patient safety culture for healthcare organizations, teamwork climate, and perceptions of management should be closely monitored.

Causal Relationship Analysis of the Patient Safety Culture Based on Safety Attitudes Questionnaire in Taiwan

PubMed Central

Zeng, Pei-Shan; Huang, Chih-Hsuan

2018-01-01

This study uses the decision-making trial and evaluation laboratory method to identify critical dimensions of the safety attitudes questionnaire in Taiwan in order to improve the patient safety culture from experts' viewpoints. Teamwork climate, stress recognition, and perceptions of management are three causal dimensions, while safety climate, job satisfaction, and working conditions are receiving dimensions. In practice, improvements on effect-based dimensions might receive little effects when a great amount of efforts have been invested. In contrast, improving a causal dimension not only improves itself but also results in better performance of other dimension(s) directly affected by this particular dimension. Teamwork climate and perceptions of management are found to be the most critical dimensions because they are both causal dimensions and have significant influences on four dimensions apiece. It is worth to note that job satisfaction is the only dimension affected by the other dimensions. In order to effectively enhance the patient safety culture for healthcare organizations, teamwork climate, and perceptions of management should be closely monitored. PMID:29686825

Patients and their families weigh in on evidence-based hospital design.

PubMed

Trochelman, Kathleen; Albert, Nancy; Spence, Jacqueline; Murray, Terri; Slifcak, Ellen

2012-02-01

In 2 landmark publications, the Institute of Medicine reported on significant deficiencies in our current health care system. In response, an area of research examining the role of the physical environment in influencing outcomes for patients and staff gained momentum. The concept of evidence-based design has evolved, and the development of structural guidelines for new hospital construction was instituted by the American Institute of Architects in 2006. To determine perceptions of patients and their families of evidence-based design features in a new heart center. Hospitalized patients and their families, most of whom were in intensive care and step-down units, were surveyed and data from the Hospital Consumer Assessment of Healthcare Providers and Systems were reviewed to determine perceptions of evidence-based design features incorporated into a new heart center and to assess patients' satisfaction with the environment. Results Responses were reviewed and categorized descriptively. Five general environment topics of focus emerged: privacy, space, noise, light, and overall atmosphere. Characteristics perceived as being dissatisfying and satisfying are discussed. Critical care nurses must be aware of the current need to recognize how much the physical environment influences care delivery and take steps to maximize patients' safety, satisfaction, and quality of care.

Understanding Current Safety Issues for Trajectory Based Operations

NASA Technical Reports Server (NTRS)

Feary, Michael; Stewart, Michael

2016-01-01

Increases in procedural complexity were investigated as a possible contributor to flight path deviations in airline operations. Understanding current operational issues and their causes must be embraced to maintain current safety standards while increasing future functionality. ASRS data and expert narratives were used to discover factors relating to pilot deviations. Our investigation pointed to ATC intervention, automation confusion, procedure design, and mixed equipment as primary issues. Future work will need to include objective data and mitigation strategies.

Applying interprofessional Team-Based Learning in patient safety: a pilot evaluation study.

PubMed

Lochner, Lukas; Girardi, Sandra; Pavcovich, Alessandra; Meier, Horand; Mantovan, Franco; Ausserhofer, Dietmar

2018-03-27

Interprofessional education (IPE) interventions are not always successful in achieving learning outcomes. Team-Based Learning (TBL) would appear to be a suitable pedagogical method for IPE, as it focuses on team performance; however, little is known about interprofessional TBL as an instructional framework for patient safety. In this pilot-study, we aimed to (1) describe participants' reactions to TBL, (2) observe their achievement with respect to interprofessional education learning objectives, and (3) document their attitudinal shifts with regard to patient safety behaviours. We developed and implemented a three-day course for pre-qualifying, non-medical healthcare students to give instruction on non-technical skills related to 'learning from errors'. The course consisted of three sequential modules: 'Recognizing Errors', 'Analysing Errors', and 'Reporting Errors'. The evaluation took place within a quasi-experimental pre-test-post-test study design. Participants completed self-assessments through valid and reliable instruments such as the Mennenga's TBL Student Assessment Instrument and the University of the West of England's Interprofessional Questionnaire. The mean scores of the individual readiness assurance tests were compared with the scores of the group readiness assurance test in order to explore if students learned from each other during group discussions. Data was analysed using descriptive (i.e. mean, standard deviation), parametric (i.e. paired t-test), and non-parametric (i.e. Wilcoxon signed-rank test) methods. Thirty-nine students from five different bachelor's programs attended the course. The participants positively rated TBL as an instructional approach. All teams outperformed the mean score of their individual members during the readiness assurance process. We observed significant improvements in 'communication and teamwork' and 'interprofessional learning' but not in 'interprofessional interaction' and 'interprofessional relationships

The Design of Transportation Equipment in Terms of Human Capabilities. The Role of Engineering Psychology in Transport Safety.

ERIC Educational Resources Information Center

McFarland, Ross A.

Human factors engineering is considered with regard to the design of safety factors for aviation and highway transportation equipment. Current trends and problem areas are identified for jet air transportation and for highway transportation. Suggested solutions to transportation safety problems are developed by applying the techniques of human…

A Discussion of Knowledge Based Design

NASA Technical Reports Server (NTRS)

Wood, Richard M.; Bauer, Steven X. S.

1999-01-01

A discussion of knowledge and Knowledge- Based design as related to the design of aircraft is presented. The paper discusses the perceived problem with existing design studies and introduces the concepts of design and knowledge for a Knowledge- Based design system. A review of several Knowledge-Based design activities is provided. A Virtual Reality, Knowledge-Based system is proposed and reviewed. The feasibility of Virtual Reality to improve the efficiency and effectiveness of aerodynamic and multidisciplinary design, evaluation, and analysis of aircraft through the coupling of virtual reality technology and a Knowledge-Based design system is also reviewed. The final section of the paper discusses future directions for design and the role of Knowledge-Based design.

Fusion Safety Program annual report, fiscal year 1994

NASA Astrophysics Data System (ADS)

Longhurst, Glen R.; Cadwallader, Lee C.; Dolan, Thomas J.; Herring, J. Stephen; McCarthy, Kathryn A.; Merrill, Brad J.; Motloch, Chester C.; Petti, David A.

1995-03-01

This report summarizes the major activities of the Fusion Safety Program in fiscal year 1994. The Idaho National Engineering Laboratory (INEL) is the designated lead laboratory and Lockheed Idaho Technologies Company is the prime contractor for this program. The Fusion Safety Program was initiated in 1979. Activities are conducted at the INEL, at other DOE laboratories, and at other institutions, including the University of Wisconsin. The technical areas covered in this report include tritium safety, beryllium safety, chemical reactions and activation product release, safety aspects of fusion magnet systems, plasma disruptions, risk assessment failure rate data base development, and thermalhydraulics code development and their application to fusion safety issues. Much of this work has been done in support of the International Thermonuclear Experimental Reactor (ITER). Also included in the report are summaries of the safety and environmental studies performed by the Fusion Safety Program for the Tokamak Physics Experiment and the Tokamak Fusion Test Reactor and of the technical support for commercial fusion facility conceptual design studies. A major activity this year has been work to develop a DOE Technical Standard for the safety of fusion test facilities.

Safety in the Air: A Curriculum About Flight and Air Traffic Control Designed for Middle School Students

DOT National Transportation Integrated Search

1983-01-01

Safety in the Air is designed to be taught as a six-lesson unit to middle school : students, preferably sixth, seventh, or eighth grade level. : This curriculum is designed first of all to familiarize both the teacher and the : student with some basi...

Simulation of data safety components for corporative systems

NASA Astrophysics Data System (ADS)

Yaremko, Svetlana A.; Kuzmina, Elena M.; Savchuk, Tamara O.; Krivonosov, Valeriy E.; Smolarz, Andrzej; Arman, Abenov; Smailova, Saule; Kalizhanova, Aliya

2017-08-01

The article deals with research of designing data safety components for corporations by means of mathematical simulations and modern information technologies. Simulation of threats ranks has been done which is based on definite values of data components. The rules of safety policy for corporative information systems have been presented. The ways of realization of safety policy rules have been proposed on the basis of taken conditions and appropriate class of valuable data protection.

Crashworthiness Design of the Shear Bolts for Light Collision Safety Devices

NASA Astrophysics Data System (ADS)

Kim, Jin Sung; Huh, Hoon; Kwon, Tae Soo

This paper introduces the jig set for the crash test and the crash test results of shear bolts which are designed to fail at train crash conditions. The tension and shear bolts are attached to Light Collision Safety Devices(LCSD) as a mechanical fuse when tension and shear bolts reach their failure load designed. The kinetic energy due to the crash is absorbed by the secondary energy absorbing device after LCSD are detached from the main body by the fracture of shear bolts. A single shear bolt was designed to fail at the load of 250 kN. The jig set designed to convert a compressive loading to a shear loading was installed to the high speed crash tester for dynamic shear tests. Two strain gauges were attached at the parallel section of the jig set to measure the load responses acting on the shear bolts. Crash tests were performed with a carrier whose mass was 250 kg and the initial speed of the carrier was 9 m/sec. From the quasi-static and dynamic experiments as well as the numerical analysis, the capacity of the shear bolts were accurately predicted for the crashworthiness design.

Protocol for a multicentre, multistage, prospective study in China using system-based approaches for consistent improvement in surgical safety

PubMed Central

Yu, Xiaochu; Jiang, Jingmei; Liu, Changwei; Shen, Keng; Wang, Zixing; Han, Wei; Liu, Xingrong; Lin, Guole; Zhang, Ye; Zhang, Ying; Ma, Yufen; Bo, Haixin; Zhao, Yupei

2017-01-01

Introduction Surgical safety has emerged as a crucial global health issue in the past two decades. Although several safety-enhancing tools are available, the pace of large-scale improvement remains slow, especially in developing countries such as China. The present project (Modern Surgery and Anesthesia Safety Management System Construction and Promotion) aims to develop and validate system-based integrated approaches for reducing perioperative deaths and complications using a multicentre, multistage design. Methods and analysis The project involves collection of clinical and outcome information for 1 20 000 surgical inpatients at four regionally representative academic/teaching general hospitals in China during three sequential stages: preparation and development, effectiveness validation and improvement of implementation for promotion. These big data will provide the evidence base for the formulation, validation and improvement processes of a system-based stratified safety intervention package covering the entire surgical pathway. Attention will be directed to managing inherent patient risks and regulating medical safety behaviour. Information technology will facilitate data collection and intervention implementation, provide supervision mechanisms and guarantee transfer of key patient safety messages between departments and personnel. Changes in rates of deaths, surgical complications during hospitalisation, length of stay, system adoption and implementation rates will be analysed to evaluate effectiveness and efficiency. Ethics and dissemination This study was approved by the institutional review boards of Peking Union Medical College Hospital, First Hospital of China Medical University, Qinghai Provincial People’s Hospital, Xiangya Hospital Central South University and the Institute of Basic Medical Sciences, Chinese Academy of Medical Sciences. Study findings will be disseminated via peer-reviewed journals, conference presentations and patent papers

Safety management of an underground-based gravitational wave telescope: KAGRA

NASA Astrophysics Data System (ADS)

Ohishi, Naoko; Miyoki, Shinji; Uchiyama, Takashi; Miyakawa, Osamu; Ohashi, Masatake

2014-08-01

KAGRA is a unique gravitational wave telescope with its location underground and use of cryogenic mirrors. Safety management plays an important role for secure development and operation of such a unique and large facility. Based on relevant law in Japan, Labor Standard Act and Industrial Safety and Health Law, various countermeasures are mandated to avoid foreseeable accidents and diseases. In addition to the usual safety management of hazardous materials, such as cranes, organic solvents, lasers, there are specific safety issues in the tunnel. Prevention of collapse, flood, and fire accidents are the most critical issues for the underground facility. Ventilation is also important for prevention of air pollution by carbon monoxide, carbon dioxide, organic solvents and radon. Oxygen deficiency should also be prevented.

Effects of auditing patient safety in hospital care: design of a mixed-method evaluation.

PubMed

Hanskamp-Sebregts, Mirelle; Zegers, Marieke; Boeijen, Wilma; Westert, Gert P; van Gurp, Petra J; Wollersheim, Hub

2013-06-22

Auditing of patient safety aims at early detection of risks of adverse events and is intended to encourage the continuous improvement of patient safety. The auditing should be an independent, objective assurance and consulting system. Auditing helps an organisation accomplish its objectives by bringing a systematic, disciplined approach to evaluating and improving the effectiveness of risk management, control, and governance. Audits are broadly conducted in hospitals, but little is known about their effects on the behaviour of healthcare professionals and patient safety outcomes. This study was initiated to evaluate the effects of patient safety auditing in hospital care and to explore the processes and mechanisms underlying these effects. Our study aims to evaluate an audit system to monitor and improve patient safety in a hospital setting. We are using a mixed-method evaluation with a before-and-after study design in eight departments of one university hospital in the period October 2011-July 2014. We measure several outcomes 3 months before the audit and 15 months after the audit. The primary outcomes are adverse events and complications. The secondary outcomes are experiences of patients, the standardised mortality ratio, prolonged hospital stay, patient safety culture, and team climate. We use medical record reviews, questionnaires, hospital administrative data, and observations to assess the outcomes. A process evaluation will be used to find out which components of internal auditing determine the effects. We report a study protocol of an effect and process evaluation to determine whether auditing improves patient safety in hospital care. Because auditing is a complex intervention targeted on several levels, we are using a combination of methods to collect qualitative and quantitative data about patient safety at the patient, professional, and department levels. This study is relevant for hospitals that want to early detect unsafe care and improve patient

The effect of workers' visibility on effectiveness of intervention programs: supervisory-based safety interventions.

PubMed

Luria, Gil; Zohar, Dov; Erev, Ido

2008-01-01

This paper discusses an organizational change intervention program targeting safety behaviors and addresses important considerations concerning the planning of organizational change. Using layout of the plant as a proxy for ease of daily leader-member interaction, the effect of workers' visibility on the effectiveness of supervisory-based safety (SBS) interventions is examined. Through a reinforcement-learning framework, it is suggested that visibility can affect supervisors' incentive to interact with subordinates regarding safety-related issues. Data were collected during SBS intervention studies in five manufacturing companies. Results suggest a reinforcement cycle model whereby increased visibility generates more frequent exchanges between supervisors and employees, resulting in improved safety behavior among employees. In turn, employees' safer behavior reinforces continued supervisory safety-related interaction. CONCLUSION AND IMPACT ON INDUSTRY: Visibility is an important moderator in supervisory based safety interventions, and can serve to increase workplace safety. Implications of these findings for safety are discussed.

Reducing safety risk among underserved caregivers with an Alzheimer's home safety program.

PubMed

Levy-Storms, Lené; Cherry, Debra L; Lee, Linda J; Wolf, Sheldon M

2017-09-01

Older adults living with Alzheimer's disease (AD) experience more of the types of accidents and injuries prevalent among older adults. Relatively few studies specifically on safety risks have included older adults of color and tested interventions. This pilot study tested the feasibility and evaluability of educating Hispanic and African American caregivers of patients living with AD about reducing safety risks in their homes. This outpatient memory clinic-based intervention study included a pre-/post-test survey design with two nonequivalent groups and predominately serves Hispanic and African Americans. Of 60 eligible caregivers, 67% participated in a tailored, safety training class with an optional follow-up call. The results indicate a reduction in some safety risks compared to baseline and/or a no intervention group, respectively, including leaving patients at home alone part-time (p < .01 and p < .01), getting lost (p < .05 and p < .05), going outdoors alone less often (p < .05 and p < .01), and giving themselves medicine (p < .05 and p < .01). At post-test, 47 clinically significant instances occurred, in which caregivers who participated in the intervention self-reported patients living with AD to be 'completely safe' in one or more of the safety risk items compared to 8 instances among those who did not. This pilot pre/post design with non-equivalent groups study needs refinement in a future randomized control trial. Despite limitations, this pilot study demonstrates the first feasible and evaluable intervention with both statistically and clinically significant results that suggest potential for reducing safety risks among at-risk minority patients living with AD in future research.

Electromagnetic compatibility and safety design of a patient compliance-free, inductive implant charger.

PubMed

Theodoridis, Michael P; Mollov, Stefan V

2014-10-01

This article presents the design of a domestic, radiofrequency induction charger for implants toward compliance with the Federal Communications Commission safety and electromagnetic compatibility regulations. The suggested arrangement does not impose any patient compliance requirements other than the use of a designated bed for night sleep, and therefore can find a domestic use. The method can be applied to a number of applications; a rechargeable pacemaker is considered as a case study. The presented work has proven that it is possible to realize a fully compliant inductive charging system with minimal patient interaction, and has generated important information for consideration by the designers of inductive charging systems. Experimental results have verified the validity of the theoretical findings.

Exploring the Effects of Cultural Variables in the Implementation of Behavior-Based Safety in Two Organizations

ERIC Educational Resources Information Center

Bumstead, Alaina; Boyce, Thomas E.

2005-01-01

The present case study examines how culture can influence behavior-based safety in different organizational settings and how behavior-based safety can impact different organizational cultures. Behavior-based safety processes implemented in two culturally diverse work settings are described. Specifically, despite identical implementation plans,…

A sustainable city environment through child safety and mobility-a challenge based on ITS?

PubMed

Leden, Lars; Gårder, Per; Schirokoff, Anna; Monterde-i-Bort, Hector; Johansson, Charlotta; Basbas, Socrates

2014-01-01

Our cities should be designed to accommodate everybody, including children. We will not move toward a more sustainable society unless we accept that children are people with transportation needs, and 'bussing' them around, or providing parental limousine services at all times, will not lead to sustainability. Rather, we will need to make our cities walkable for children, at least those above a certain age. Safety has two main aspects, traffic safety and personal safety (risk of assault). Besides being safe, children will also need an urban environment with reasonable mobility, where they themselves can reach destinations with reasonable effort; else they will still need to be driven. This paper presents the results of two expert questionnaires focusing on the potential safety and mobility benefits to child pedestrians of targeted types of intelligent transportation systems (ITS). Five different types of functional requests for children were identified based on previous work. The first expert questionnaire was structured to collect expert opinions on which ITS solutions or devices would be, and why, the most relevant ones to satisfy the five different functional requests of child pedestrians. Based on the first questionnaire, fifteen problem areas were defined. In the second questionnaire, the experts ranked the fifteen areas, and prioritized related ITS services, according to their potential for developing ITS services beneficial to children. Several ITS systems for improving pedestrian quality are discussed. ITS services can be used when a pedestrian route takes them to a dangerous street, dangerous crossing point or through a dangerous neighborhood. An improvement of safety and other qualities would lead to increased mobility and a more sustainable way of living. Children would learn how to live to support their own health and a sustainable city environment. But it will be up to national, regional and local governments, through their ministries and agencies and

Design of Secure ECG-Based Biometric Authentication in Body Area Sensor Networks

PubMed Central

Peter, Steffen; Pratap Reddy, Bhanu; Momtaz, Farshad; Givargis, Tony

2016-01-01

Body area sensor networks (BANs) utilize wireless communicating sensor nodes attached to a human body for convenience, safety, and health applications. Physiological characteristics of the body, such as the heart rate or Electrocardiogram (ECG) signals, are promising means to simplify the setup process and to improve security of BANs. This paper describes the design and implementation steps required to realize an ECG-based authentication protocol to identify sensor nodes attached to the same human body. Therefore, the first part of the paper addresses the design of a body-area sensor system, including the hardware setup, analogue and digital signal processing, and required ECG feature detection techniques. A model-based design flow is applied, and strengths and limitations of each design step are discussed. Real-world measured data originating from the implemented sensor system are then used to set up and parametrize a novel physiological authentication protocol for BANs. The authentication protocol utilizes statistical properties of expected and detected deviations to limit the number of false positive and false negative authentication attempts. The result of the described holistic design effort is the first practical implementation of biometric authentication in BANs that reflects timing and data uncertainties in the physical and cyber parts of the system. PMID:27110785

Design of Secure ECG-Based Biometric Authentication in Body Area Sensor Networks.

PubMed

Peter, Steffen; Reddy, Bhanu Pratap; Momtaz, Farshad; Givargis, Tony

2016-04-22

Body area sensor networks (BANs) utilize wireless communicating sensor nodes attached to a human body for convenience, safety, and health applications. Physiological characteristics of the body, such as the heart rate or Electrocardiogram (ECG) signals, are promising means to simplify the setup process and to improve security of BANs. This paper describes the design and implementation steps required to realize an ECG-based authentication protocol to identify sensor nodes attached to the same human body. Therefore, the first part of the paper addresses the design of a body-area sensor system, including the hardware setup, analogue and digital signal processing, and required ECG feature detection techniques. A model-based design flow is applied, and strengths and limitations of each design step are discussed. Real-world measured data originating from the implemented sensor system are then used to set up and parametrize a novel physiological authentication protocol for BANs. The authentication protocol utilizes statistical properties of expected and detected deviations to limit the number of false positive and false negative authentication attempts. The result of the described holistic design effort is the first practical implementation of biometric authentication in BANs that reflects timing and data uncertainties in the physical and cyber parts of the system.

Arizona Traffic Safety Education, K-8. Grade 4.

ERIC Educational Resources Information Center

Mesa Public Schools, AZ.

One in a series designed to assist Arizona elementary and junior high school teachers in developing children's traffic skills, this curriculum guide for grade 4 deals with the how and why of traffic safety. Based on the introduction to highway safety rules and laws that students have mastered in grades K through 3, the program for grades 4 through…

Arizona Traffic Safety Education, K-8. Grade 5.

ERIC Educational Resources Information Center

Mesa Public Schools, AZ.

One in a series designed to assist Arizona elementary and junior high school teachers in developing children's traffic skills, this curriculum guide for grade 5 deals with the how and why of traffic safety. Based on the introduction to highway safety rules and laws that students have mastered in grades K through 3, the program for grades 4 through…

Effects of a team-based assessment and intervention on patient safety culture in general practice: an open randomised controlled trial.

PubMed

Hoffmann, B; Müller, V; Rochon, J; Gondan, M; Müller, B; Albay, Z; Weppler, K; Leifermann, M; Mießner, C; Güthlin, C; Parker, D; Hofinger, G; Gerlach, F M

2014-01-01

The measurement of safety culture in healthcare is generally regarded as a first step towards improvement. Based on a self-assessment of safety culture, the Frankfurt Patient Safety Matrix (FraTrix) aims to enable healthcare teams to improve safety culture in their organisations. In this study we assessed the effects of FraTrix on safety culture in general practice. We conducted an open randomised controlled trial in 60 general practices. FraTrix was applied over a period of 9 months during three facilitated team sessions in intervention practices. At baseline and after 12 months, scores were allocated for safety culture as expressed in practice structure and processes (indicators), in safety climate and in patient safety incident reporting. The primary outcome was the indicator error management. During the team sessions, practice teams reflected on their safety culture and decided on about 10 actions per practice to improve it. After 12 months, no significant differences were found between intervention and control groups in terms of error management (competing probability=0.48, 95% CI 0.34 to 0.63, p=0.823), 11 further patient safety culture indicators and safety climate scales. Intervention practices showed better reporting of patient safety incidents, reflected in a higher number of incident reports (mean (SD) 4.85 (4.94) vs 3.10 (5.42), p=0.045) and incident reports of higher quality (scoring 2.27 (1.93) vs 1.49 (1.67), p=0.038) than control practices. Applied as a team-based instrument to assess safety culture, FraTrix did not lead to measurable improvements in error management. Comparable studies with more positive results had less robust study designs. In future research, validated combined methods to measure safety culture will be required. In addition, more attention should be paid to evaluation of process parameters. Implemented actions and incident reporting may be more appropriate target endpoints. German Clinical Trials Register (Deutsches Register

Aptamer-Based Analysis: A Promising Alternative for Food Safety Control

PubMed Central

Amaya-González, Sonia; de-los-Santos-Álvarez, Noemí; Miranda-Ordieres, Arturo J.; Lobo-Castañón, Maria Jesús

2013-01-01

Ensuring food safety is nowadays a top priority of authorities and professional players in the food supply chain. One of the key challenges to determine the safety of food and guarantee a high level of consumer protection is the availability of fast, sensitive and reliable analytical methods to identify specific hazards associated to food before they become a health problem. The limitations of existing methods have encouraged the development of new technologies, among them biosensors. Success in biosensor design depends largely on the development of novel receptors with enhanced affinity to the target, while being stable and economical. Aptamers fulfill these characteristics, and thus have surfaced as promising alternatives to natural receptors. This Review describes analytical strategies developed so far using aptamers for the control of pathogens, allergens, adulterants, toxins and other forbidden contaminants to ensure food safety. The main progresses to date are presented, highlighting potential prospects for the future. PMID:24287543

Aerospace Safety Advisory Panel

NASA Technical Reports Server (NTRS)

1989-01-01

This report provides findings, conclusions and recommendations regarding the National Space Transportation System (NSTS), the Space Station Freedom Program (SSFP), aeronautical projects and other areas of NASA activities. The main focus of the Aerospace Safety Advisory Panel (ASAP) during 1988 has been monitoring and advising NASA and its contractors on the Space Transportation System (STS) recovery program. NASA efforts have restored the flight program with a much better management organization, safety and quality assurance organizations, and management communication system. The NASA National Space Transportation System (NSTS) organization in conjunction with its prime contractors should be encouraged to continue development and incorporation of appropriate design and operational improvements which will further reduce risk. The data from each Shuttle flight should be used to determine if affordable design and/or operational improvements could further increase safety. The review of Critical Items (CILs), Failure Mode Effects and Analyses (FMEAs) and Hazard Analyses (HAs) after the Challenger accident has given the program a massive data base with which to establish a formal program with prioritized changes.

Development of a safety communication and recognition program for construction.

PubMed

Sparer, Emily H; Herrick, Robert F; Dennerlein, Jack T

2015-05-01

Leading-indicator-based (e.g., hazard recognition) incentive programs provide an alternative to controversial lagging-indicator-based (e.g., injury rates) programs. We designed a leading-indicator-based safety communication and recognition program that incentivized safe working conditions. The program was piloted for two months on a commercial construction worksite and then redesigned using qualitative interview and focus group data from management and workers. We then ran the redesigned program for six months on the same worksite. Foremen received detailed weekly feedback from safety inspections, and posters displayed worksite and subcontractor safety scores. In the final program design, the whole site, not individual subcontractors, was the unit of analysis and recognition. This received high levels of acceptance from workers, who noted increased levels of site unity and team-building. This pilot program showed that construction workers value solidarity with others on site, demonstrating the importance of health and safety programs that engage all workers through a reliable and consistent communication infrastructure. © The Author(s) 2015 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Demonstrating the Safety and Reliability of a New System or Spacecraft: Incorporating Analyses and Reviews of the Design and Processing in Determining the Number of Tests to be Conducted

NASA Technical Reports Server (NTRS)

Vesely, William E.; Colon, Alfredo E.

2010-01-01

Design Safety/Reliability is associated with the probability of no failure-causing faults existing in a design. Confidence in the non-existence of failure-causing faults is increased by performing tests with no failure. Reliability-Growth testing requirements are based on initial assurance and fault detection probability. Using binomial tables generally gives too many required tests compared to reliability-growth requirements. Reliability-Growth testing requirements are based on reliability principles and factors and should be used.

The Implementation and Maintenance of a Behavioral Safety Process in a Petroleum Refinery

ERIC Educational Resources Information Center

Myers, Wanda V.; McSween, Terry E.; Medina, Rixio E.; Rost, Kristen; Alvero, Alicia M.

2010-01-01

A values-centered and team-based behavioral safety process was implemented in a petroleum oil refinery. Employee teams defined the refinery's safety values and related practices, which were used to guide the process design and implementation. The process included (a) a safety assessment; (b) the clarification of safety-related values and related…

Urban transport safety assessment in akure based on corresponding performance indicators

NASA Astrophysics Data System (ADS)

Oye, Adedamola; Aderinlewo, Olufikayo; Croope, Silvana

2013-03-01

The level of safety of the transportation system in Akure, Nigeria was assessed by identifying the associated road safety problems and developing the corresponding safety performance indicators. These indicators were analysed with respect to accidents that occurred within the city from the year 2005 to 2009 based on the corresponding attributable risk measures. The results of the analysis showed the state of existing safety programs in Akure town. Six safety performance indicators were identified namely alcohol and drug use, excessive speeds, protection system (use of seat belts and helmets), use of day time running lights, state of vehicles (passive safety) and road condition. These indicators were used to determine the percentage of injury accidents as follows: 83.33% and 86.36% for years 2005 and 2006 respectively, 81.46% for year 2007 while years 2008 and 2009 had 82.86% and 78.12% injury accidents respectively.

Design of an autonomous teleoperated cargo transporting vehicle for lunar base operations

NASA Technical Reports Server (NTRS)

Holt, James; Lao, Tom; Monali, Nkoy

1989-01-01

At the turn of the century NASA plans to begin construction of a lunar base. The base will likely consist of developed areas (i.e., habitation, laboratory, landing and launching sites, power plant) separated from each other due to safety considerations. The Self-Repositioning Track Vehicle (SRTV) was designed to transport cargo between these base facilities. The SRTV operates by using two robotic arms to raise and position segments of track upon which the vehicle travels. The SRTV utilizes the semiautonomous mobility (SAM) method of teleoperation; actuator-controlled interlocking track sections; two robotic arms each with five degrees of freedom; and these materials: titanium for structural members and aluminum for shell members, with the possible use of light-weight, high-strength composites.

Obtaining Valid Safety Data for Software Safety Measurement and Process Improvement

NASA Technical Reports Server (NTRS)

Basili, Victor r.; Zelkowitz, Marvin V.; Layman, Lucas; Dangle, Kathleen; Diep, Madeline

2010-01-01

We report on a preliminary case study to examine software safety risk in the early design phase of the NASA Constellation spaceflight program. Our goal is to provide NASA quality assurance managers with information regarding the ongoing state of software safety across the program. We examined 154 hazard reports created during the preliminary design phase of three major flight hardware systems within the Constellation program. Our purpose was two-fold: 1) to quantify the relative importance of software with respect to system safety; and 2) to identify potential risks due to incorrect application of the safety process, deficiencies in the safety process, or the lack of a defined process. One early outcome of this work was to show that there are structural deficiencies in collecting valid safety data that make software safety different from hardware safety. In our conclusions we present some of these deficiencies.

Designer: A Knowledge-Based Graphic Design Assistant.

ERIC Educational Resources Information Center

Weitzman, Louis

This report describes Designer, an interactive tool for assisting with the design of two-dimensional graphic interfaces for instructional systems. The system, which consists of a color graphics interface to a mathematical simulation, provides enhancements to the Graphics Editor component of Steamer (a computer-based training system designed to aid…

Home-based management of severely acute malnutrition: feasibility of ethically designed, community-based randomised clinical trials.

PubMed

Patil, Rajan R

2015-01-01

The Indian Council of Medical Research had, on May 31, 2011, called for research proposals on severely acute malnourished (SAM) children to generate evidence for the development of practical and scalable regimens to medically rehabilitate children suffering from SAM, without serious complications, at the home/community level and/or peripheral inpatient facilities. The primary outcomes of the proposed research study are recovery from SAM in the short term, as well as sustenance of recovery (for at least six months after the initiation of treatment). The secondary outcomes are the acceptability, feasibility and safety of the regimes being tested. It was suggested that the studies be designed as individual or cluster randomised or quasi randomised controlled trials (RCTs). This paper analyses the methodological, operational, and most importantly, ethical challenges and implications of conducting community-based RCTs involving SAM children. The paper dwells in detail on why and how the RCT design is inappropriate and unsuitable for studying the effectiveness of home-based management of SAM children in the community.

Assessment of Contributions to Patient Safety Knowledge by the Agency for Healthcare Research and Quality-Funded Patient Safety Projects

PubMed Central

Sorbero, Melony E S; Ricci, Karen A; Lovejoy, Susan; Haviland, Amelia M; Smith, Linda; Bradley, Lily A; Hiatt, Liisa; Farley, Donna O

2009-01-01

Objective To characterize the activities of projects funded in Agency for Healthcare Research and Quality (AHRQ)' patient safety portfolio and assess their aggregate potential to contribute to knowledge development. Data Sources Information abstracted from proposals for projects funded in AHRQ' patient safety portfolio, information on safety practices from the AHRQ Evidence Report on Patient Safety Practices, and products produced by the projects. Study Design This represented one part of the process evaluation conducted as part of a longitudinal evaluation based on the Context–Input–Process–Product model. Principal Findings The 234 projects funded through AHRQ' patient safety portfolio examined a wide variety of patient safety issues and extended their work beyond the hospital setting to less studied parts of the health care system. Many of the projects implemented and tested practices for which the patient safety evidence report identified a need for additional evidence. The funded projects also generated a substantial body of new patient safety knowledge through a growing number of journal articles and other products. Conclusions The projects funded in AHRQ' patient safety portfolio have the potential to make substantial contributions to the knowledge base on patient safety. The full value of this new knowledge remains to be confirmed through the synthesis of results. PMID:21456108

Towards Measurement of Confidence in Safety Cases

NASA Technical Reports Server (NTRS)

Denney, Ewen; Paim Ganesh J.; Habli, Ibrahim

2011-01-01

Arguments in safety cases are predominantly qualitative. This is partly attributed to the lack of sufficient design and operational data necessary to measure the achievement of high-dependability targets, particularly for safety-critical functions implemented in software. The subjective nature of many forms of evidence, such as expert judgment and process maturity, also contributes to the overwhelming dependence on qualitative arguments. However, where data for quantitative measurements is systematically collected, quantitative arguments provide far more benefits over qualitative arguments, in assessing confidence in the safety case. In this paper, we propose a basis for developing and evaluating integrated qualitative and quantitative safety arguments based on the Goal Structuring Notation (GSN) and Bayesian Networks (BN). The approach we propose identifies structures within GSN-based arguments where uncertainties can be quantified. BN are then used to provide a means to reason about confidence in a probabilistic way. We illustrate our approach using a fragment of a safety case for an unmanned aerial system and conclude with some preliminary observations

Evaluation of aviation-based safety team training in a hospital in The Netherlands.

PubMed

De Korne, Dirk F; Van Wijngaarden, Jeroen D H; Van Dyck, Cathy; Hiddema, U Francis; Klazinga, Niek S

2014-01-01

The purpose of this paper is to evaluate the implementation of a broad-scale team resource management (TRM) program on safety culture in a Dutch eye hospital, detailing the program's content and procedures. Aviation-based TRM training is recognized as a useful approach to increase patient safety, but little is known about how it affects safety culture. Pre- and post-assessments of the hospitals' safety culture was based on interviews with ophthalmologists, anesthesiologists, residents, nurses, and support staff. Interim observations were made at training sessions and in daily hospital practice. The program consisted of safety audits of processes and (team) activities, interactive classroom training sessions by aviation experts, a flight simulator session, and video recording of team activities with subsequent feedback. Medical professionals considered aviation experts inspiring role models and respected their non-hierarchical external perspective and focus on medical-technical issues. The post-assessment showed that ophthalmologists and other hospital staff had become increasingly aware of safety issues. The multidisciplinary approach promoted social (team) orientation that replaced the former functionally-oriented culture. The number of reported near-incidents greatly increased; the number of wrong-side surgeries stabilized to a minimum after an initial substantial reduction. The study was observational and the hospital's variety of efforts to improve safety culture prevented us from establishing a causal relation between improvement and any one specific intervention. Aviation-based TRM training can be a useful to stimulate safety culture in hospitals. Safety and quality improvements are not single treatment interventions but complex socio-technical interventions. A multidisciplinary system approach and focus on "team" instead of "profession" seems both necessary and difficult in hospital care.

Using community-based participatory research to design and initiate a study on immigrant worker health and safety in San Francisco's Chinatown restaurants.

PubMed

Minkler, Meredith; Lee, Pam Tau; Tom, Alex; Chang, Charlotte; Morales, Alvaro; Liu, Shaw San; Salvatore, Alicia; Baker, Robin; Chen, Feiyi; Bhatia, Rajiv; Krause, Niklas

2010-04-01

Restaurant workers have among the highest rates of work-related illness and injury in the US, but little is known about the working conditions and occupational health status of Chinese immigrant restaurant workers. Community-based participatory research (CBPR) was employed to study restaurant working conditions and worker health in San Francisco's Chinatown. A community/academic/health department collaborative was formed and 23 restaurant workers trained on research techniques and worker health and safety. A worker survey instrument and a restaurant observational checklist were collaboratively developed. The checklist was piloted in 71 Chinatown restaurants, and the questionnaire administered to 433 restaurant workers. Restaurant workers, together with other partners, made substantial contributions to construction of the survey and checklist tools and improved their cultural appropriateness. The utility of the checklist tool for restaurant-level data collection was demonstrated. CBPR holds promise for both studying worker health and safety among immigrant Chinese restaurant workers and developing culturally appropriate research tools. A new observational checklist also has potential for restaurant-level data collection on worker health and safety conditions. (c) 2010 Wiley-Liss, Inc.

Protocol for a multicentre, multistage, prospective study in China using system-based approaches for consistent improvement in surgical safety.

PubMed

Yu, Xiaochu; Jiang, Jingmei; Liu, Changwei; Shen, Keng; Wang, Zixing; Han, Wei; Liu, Xingrong; Lin, Guole; Zhang, Ye; Zhang, Ying; Ma, Yufen; Bo, Haixin; Zhao, Yupei

2017-06-15

Surgical safety has emerged as a crucial global health issue in the past two decades. Although several safety-enhancing tools are available, the pace of large-scale improvement remains slow, especially in developing countries such as China. The present project (Modern Surgery and Anesthesia Safety Management System Construction and Promotion) aims to develop and validate system-based integrated approaches for reducing perioperative deaths and complications using a multicentre, multistage design. The project involves collection of clinical and outcome information for 1 20 000 surgical inpatients at four regionally representative academic/teaching general hospitals in China during three sequential stages: preparation and development, effectiveness validation and improvement of implementation for promotion. These big data will provide the evidence base for the formulation, validation and improvement processes of a system-based stratified safety intervention package covering the entire surgical pathway. Attention will be directed to managing inherent patient risks and regulating medical safety behaviour. Information technology will facilitate data collection and intervention implementation, provide supervision mechanisms and guarantee transfer of key patient safety messages between departments and personnel. Changes in rates of deaths, surgical complications during hospitalisation, length of stay, system adoption and implementation rates will be analysed to evaluate effectiveness and efficiency. This study was approved by the institutional review boards of Peking Union Medical College Hospital, First Hospital of China Medical University, Qinghai Provincial People's Hospital, Xiangya Hospital Central South University and the Institute of Basic Medical Sciences, Chinese Academy of Medical Sciences. Study findings will be disseminated via peer-reviewed journals, conference presentations and patent papers. © Article author(s) (or their employer(s) unless otherwise

Nuclear safety considerations in the conceptual design of a fast reactor for space electric power and propulsion

NASA Technical Reports Server (NTRS)

Hsieh, T.-M.; Koenig, D. R.

1977-01-01

Some nuclear safety aspects of a 3.2 mWt heat pipe cooled fast reactor with out-of-core thermionic converters are discussed. Safety related characteristics of the design including a thin layer of B4C surrounding the core, the use of heat pipes and BeO reflector assembly, the elimination of fuel element bowing, etc., are highlighted. Potential supercriticality hazards and countermeasures are considered. Impacts of some safety guidelines of space transportation system are also briefly discussed, since the currently developing space shuttle would be used as the primary launch vehicle for the nuclear electric propulsion spacecraft.

FEM Analysis of Glass/Epoxy Composite Based Industrial Safety Helmet

NASA Astrophysics Data System (ADS)

Ram, Khushi; Bajpai, Pramendra Kumar

2017-08-01

Recently, the use of fiber reinforced polymer in every field of engineering (automobile, industry and aerospace) and medical has increased due to its distinctive mechanical properties. The fiber based polymer composites are more popular because these have high strength, light in weight, low cost and easily available. In the present work, the finite element analysis (FEA) of glass/epoxy composite based industrial safety helmet has been performed using solid-works simulation software. The modeling results show that glass fiber reinforced epoxy composite can be used as a material for fabrication of industrial safety helmet which has good mechanical properties than the existing helmet material.

Multidisciplinary design optimization of vehicle instrument panel based on multi-objective genetic algorithm

NASA Astrophysics Data System (ADS)

Wang, Ping; Wu, Guangqiang

2013-03-01

Typical multidisciplinary design optimization(MDO) has gradually been proposed to balance performances of lightweight, noise, vibration and harshness(NVH) and safety for instrument panel(IP) structure in the automotive development. Nevertheless, plastic constitutive relation of Polypropylene(PP) under different strain rates, has not been taken into consideration in current reliability-based and collaborative IP MDO design. In this paper, based on tensile test under different strain rates, the constitutive relation of Polypropylene material is studied. Impact simulation tests for head and knee bolster are carried out to meet the regulation of FMVSS 201 and FMVSS 208, respectively. NVH analysis is performed to obtain mainly the natural frequencies and corresponding mode shapes, while the crashworthiness analysis is employed to examine the crash behavior of IP structure. With the consideration of lightweight, NVH, head and knee bolster impact performance, design of experiment(DOE), response surface model(RSM), and collaborative optimization(CO) are applied to realize the determined and reliability-based optimizations, respectively. Furthermore, based on multi-objective genetic algorithm(MOGA), the optimal Pareto sets are completed to solve the multi-objective optimization(MOO) problem. The proposed research ensures the smoothness of Pareto set, enhances the ability of engineers to make a comprehensive decision about multi-objectives and choose the optimal design, and improves the quality and efficiency of MDO.

The safety and reliability of the S and A mechanism designed for the NASA/LSPE program

NASA Technical Reports Server (NTRS)

Montesi, L. J.

1973-01-01

Under contract to the Manned Spacecraft Center, NASA/Houston, NOL developed a number of explosive charges for use in studying the surface of the moon during Apollo 17 activities. The charges were part of the Lunar Seismic Profiling Experiment (LSPE). When the Safety and Arming Device used in the previous ALSEP experiments was found unsuitable for use with the new explosive packages, NOL also designed the Safety and Arming Mechanism, and the safety and reliability tests conducted are described. The results of the test program indicate that the detonation transfer probability between the armed explosive components exceeds 0.9999, and is less than 0.0001 when the explosive components are in the safe position.

Safety Aspects of Bio-Based Nanomaterials.

PubMed

Catalán, Julia; Norppa, Hannu

2017-12-01

Moving towards a bio-based and circular economy implies a major focus on the responsible and sustainable utilization of bio-resources. The emergence of nanotechnology has opened multiple possibilities, not only in the existing industrial sectors, but also for completely novel applications of nanoscale bio-materials, the commercial exploitation of which has only begun during the last few years. Bio-based materials are often assumed not to be toxic. However, this pre-assumption is not necessarily true. Here, we provide a short overview on health and environmental aspects associated with bio-based nanomaterials, and on the relevant regulatory requirements. We also discuss testing strategies that may be used for screening purposes at pre-commercial stages. Although the tests presently used to reveal hazards are still evolving, regarding modifi-cations required for nanomaterials, their application is needed before the upscaling or commercialization of bio-based nanomaterials, to ensure the market potential of the nanomaterials is not delayed by uncertainties about safety issues.

Effect of railway safety education on the safety knowledge and behaviour intention of schoolchildren.

PubMed

Silla, Anne; Kallberg, Veli-Pekka

2016-04-01

This study was designed to evaluate whether railway safety lessons are effective in increasing schoolchildren's safety knowledge and behaviour intention. The railway safety education in schools included a 45-min lesson on safe behaviour in a railway environment directed at 8-11 year old schoolchildren. The lessons were held in four schools located near railway lines in Finland. The effectiveness of this measure was evaluated based on a short survey directed at pupils before the lesson (base level) and around 2-3 months later (post-lesson) based on three variables which are considered as strong determinants of actual behaviour: behaviour intention, estimated dangerousness of the behaviour, and level of knowledge on the legality of the behaviour. The results show that the change in the share of correct answers was positive regarding all questions except for one question in which the difference was not significant. Based on this we can reasonably assume that railway safety education in schools can have a positive effect for all the measured variables, although the effect is not necessarily large. The results indicate that these positive changes can have a positive effect on the frequency of trespassing (i.e. fewer unsafe crossings in the future). We can further assume that reduction in the frequency of trespassing would reduce the frequency of trespassing accidents. Copyright © 2015 Elsevier Ltd. All rights reserved.

Safety huddles to proactively identify and address electronic health record safety

PubMed Central

Menon, Shailaja; Singh, Hardeep; Giardina, Traber D; Rayburn, William L; Davis, Brenda P; Russo, Elise M

2017-01-01

Objective: Methods to identify and study safety risks of electronic health records (EHRs) are underdeveloped and largely depend on limited end-user reports. “Safety huddles” have been found useful in creating a sense of collective situational awareness that increases an organization’s capacity to respond to safety concerns. We explored the use of safety huddles for identifying and learning about EHR-related safety concerns. Design: Data were obtained from daily safety huddle briefing notes recorded at a single midsized tertiary-care hospital in the United States over 1 year. Huddles were attended by key administrative, clinical, and information technology staff. We conducted a content analysis of huddle notes to identify what EHR-related safety concerns were discussed. We expanded a previously developed EHR-related error taxonomy to categorize types of EHR-related safety concerns recorded in the notes. Results: On review of daily huddle notes spanning 249 days, we identified 245 EHR-related safety concerns. For our analysis, we defined EHR technology to include a specific EHR functionality, an entire clinical software application, or the hardware system. Most concerns (41.6%) involved “EHR technology working incorrectly,” followed by 25.7% involving “EHR technology not working at all.” Concerns related to “EHR technology missing or absent” accounted for 16.7%, whereas 15.9% were linked to “user errors.” Conclusions: Safety huddles promoted discussion of several technology-related issues at the organization level and can serve as a promising technique to identify and address EHR-related safety concerns. Based on our findings, we recommend that health care organizations consider huddles as a strategy to promote understanding and improvement of EHR safety. PMID:28031286

A rough set-based measurement model study on high-speed railway safety operation.

PubMed

Hu, Qizhou; Tan, Minjia; Lu, Huapu; Zhu, Yun

2018-01-01

Aiming to solve the safety problems of high-speed railway operation and management, one new method is urgently needed to construct on the basis of the rough set theory and the uncertainty measurement theory. The method should carefully consider every factor of high-speed railway operation that realizes the measurement indexes of its safety operation. After analyzing the factors that influence high-speed railway safety operation in detail, a rough measurement model is finally constructed to describe the operation process. Based on the above considerations, this paper redistricts the safety influence factors of high-speed railway operation as 16 measurement indexes which include staff index, vehicle index, equipment index and environment. And the paper also provides another reasonable and effective theoretical method to solve the safety problems of multiple attribute measurement in high-speed railway operation. As while as analyzing the operation data of 10 pivotal railway lines in China, this paper respectively uses the rough set-based measurement model and value function model (one model for calculating the safety value) for calculating the operation safety value. The calculation result shows that the curve of safety value with the proposed method has smaller error and greater stability than the value function method's, which verifies the feasibility and effectiveness.

Cultural factors influencing safety need to be addressed in design and operation of technology.

PubMed

Meshkati, N

1996-10-01

Cultural factors which influence aviation safety in aircraft design, air traffic control, and human factors training are examined. Analysis of the Avianca Flight 052 crash in New York in January, 1990, demonstrates the catastrosphic effects cultural factors can play. Cultural factors include attitude toward work and technology, organizational hierarchy, religion, and population stereotyping.

41 CFR 102-76.30 - What seismic safety standards must Federal agencies follow in the design and construction of...

Code of Federal Regulations, 2013 CFR

2013-07-01

... (Continued) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 76-DESIGN AND CONSTRUCTION Design and Construction... 41 Public Contracts and Property Management 3 2013-07-01 2013-07-01 false What seismic safety standards must Federal agencies follow in the design and construction of Federal facilities? 102-76.30...

41 CFR 102-76.30 - What seismic safety standards must Federal agencies follow in the design and construction of...

Code of Federal Regulations, 2011 CFR

2011-01-01

... (Continued) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 76-DESIGN AND CONSTRUCTION Design and Construction... 41 Public Contracts and Property Management 3 2011-01-01 2011-01-01 false What seismic safety standards must Federal agencies follow in the design and construction of Federal facilities? 102-76.30...

41 CFR 102-76.30 - What seismic safety standards must Federal agencies follow in the design and construction of...

Code of Federal Regulations, 2014 CFR

2014-01-01

... (Continued) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 76-DESIGN AND CONSTRUCTION Design and Construction... 41 Public Contracts and Property Management 3 2014-01-01 2014-01-01 false What seismic safety standards must Federal agencies follow in the design and construction of Federal facilities? 102-76.30...

41 CFR 102-76.30 - What seismic safety standards must Federal agencies follow in the design and construction of...

Code of Federal Regulations, 2012 CFR

2012-01-01

... (Continued) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 76-DESIGN AND CONSTRUCTION Design and Construction... 41 Public Contracts and Property Management 3 2012-01-01 2012-01-01 false What seismic safety standards must Federal agencies follow in the design and construction of Federal facilities? 102-76.30...

41 CFR 102-76.30 - What seismic safety standards must Federal agencies follow in the design and construction of...

Code of Federal Regulations, 2010 CFR

2010-07-01

... (Continued) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 76-DESIGN AND CONSTRUCTION Design and Construction... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What seismic safety standards must Federal agencies follow in the design and construction of Federal facilities? 102-76.30...

Safety philosophy of gas turbine high temperature reactor (GTHTR300)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shoji Katanishi; Kazuhiko Kunitomi; Shusaku Shiozawa

2002-07-01

Japan Atomic Energy Research Institute (JAERI) has undertaken the study of an original design concept of gas turbine high temperature reactor, the GTHTR300. The general concept of this study is development of a greatly simplified design that leads to substantially reduced technical and cost requirements. Newly proposed design features enable the GTHTR300 to be an efficient and economically competitive reactor in 2010's. Also, the GTHTR300 fully takes advantage of its inherent safety characteristics. The safety philosophy of the GTHTR300 is developed based on the HTTR (High Temperature Engineering Test Reactor) of JAERI which is the first HTGR in Japan. Majormore » features of the newly proposed safety philosophy for the GTHTR300 are described in this article. (authors)« less

Fire safety of ground-based space facilities on the spaceport ;Vostochny;

NASA Astrophysics Data System (ADS)

Artamonov, Vladimir S.; Gordienko, Denis M.; Melikhov, Anatoly S.

2017-06-01

The facilities of the spaceport ;Vostochny; and the innovative technologies for fire safety to be implemented are considered. The planned approaches and prospects for fire safety ensuring at the facilities of the spaceport ;Vostochny; are presented herein, based on the study of emergency situations having resulted in fire accidents and explosion cases at the facilities supporting space vehicles operation.

NASA aviation safety reporting system

NASA Technical Reports Server (NTRS)

1977-01-01

During the third quarter of operation of the Aviation Safety Reporting System (ASRS), 1429 reports concerning aviation safety were received from pilots, air traffic controllers, and others in the national aviation system. Details of the administration and results of the program are discussed. The design and construction of the ASRS data base are briefly presented. Altitude deviations and potential aircraft conflicts associated with misunderstood clearances were studied and the results are discussed. Summary data regarding alert bulletins, examples of alert bulletins and responses to them, and a sample of deidentified ASRS reports are provided.

Seismic performance assessment of base-isolated safety-related nuclear structures

USGS Publications Warehouse

Huang, Y.-N.; Whittaker, A.S.; Luco, N.

2010-01-01

Seismic or base isolation is a proven technology for reducing the effects of earthquake shaking on buildings, bridges and infrastructure. The benefit of base isolation has been presented in terms of reduced accelerations and drifts on superstructure components but never quantified in terms of either a percentage reduction in seismic loss (or percentage increase in safety) or the probability of an unacceptable performance. Herein, we quantify the benefits of base isolation in terms of increased safety (or smaller loss) by comparing the safety of a sample conventional and base-isolated nuclear power plant (NPP) located in the Eastern U.S. Scenario- and time-based assessments are performed using a new methodology. Three base isolation systems are considered, namely, (1) Friction Pendulum??? bearings, (2) lead-rubber bearings and (3) low-damping rubber bearings together with linear viscous dampers. Unacceptable performance is defined by the failure of key secondary systems because these systems represent much of the investment in a new build power plant and ensure the safe operation of the plant. For the scenario-based assessments, the probability of unacceptable performance is computed for an earthquake with a magnitude of 5.3 at a distance 7.5 km from the plant. For the time-based assessments, the annual frequency of unacceptable performance is computed considering all potential earthquakes that may occur. For both assessments, the implementation of base isolation reduces the probability of unacceptable performance by approximately four orders of magnitude for the same NPP superstructure and secondary systems. The increase in NPP construction cost associated with the installation of seismic isolators can be offset by substantially reducing the required seismic strength of secondary components and systems and potentially eliminating the need to seismically qualify many secondary components and systems. ?? 2010 John Wiley & Sons, Ltd.

Development of an evidence-based framework of factors contributing to patient safety incidents in hospital settings: a systematic review

PubMed Central

McEachan, Rosemary R C; Giles, Sally J; Sirriyeh, Reema; Watt, Ian S; Wright, John

2012-01-01

Objective The aim of this systematic review was to develop a ‘contributory factors framework’ from a synthesis of empirical work which summarises factors contributing to patient safety incidents in hospital settings. Design A mixed-methods systematic review of the literature was conducted. Data sources Electronic databases (Medline, PsycInfo, ISI Web of knowledge, CINAHL and EMBASE), article reference lists, patient safety websites, registered study databases and author contacts. Eligibility criteria Studies were included that reported data from primary research in secondary care aiming to identify the contributory factors to error or threats to patient safety. Results 1502 potential articles were identified. 95 papers (representing 83 studies) which met the inclusion criteria were included, and 1676 contributory factors extracted. Initial coding of contributory factors by two independent reviewers resulted in 20 domains (eg, team factors, supervision and leadership). Each contributory factor was then coded by two reviewers to one of these 20 domains. The majority of studies identified active failures (errors and violations) as factors contributing to patient safety incidents. Individual factors, communication, and equipment and supplies were the other most frequently reported factors within the existing evidence base. Conclusions This review has culminated in an empirically based framework of the factors contributing to patient safety incidents. This framework has the potential to be applied across hospital settings to improve the identification and prevention of factors that cause harm to patients. PMID:22421911

A Fiber Bragg Grating-Based Monitoring System for Roof Safety Control in Underground Coal Mining

PubMed Central

Zhao, Yiming; Zhang, Nong; Si, Guangyao

2016-01-01

Monitoring of roof activity is a primary measure adopted in the prevention of roof collapse accidents and functions to optimize and support the design of roadways in underground coalmines. However, traditional monitoring measures, such as using mechanical extensometers or electronic gauges, either require arduous underground labor or cannot function properly in the harsh underground environment. Therefore, in this paper, in order to break through this technological barrier, a novel monitoring system for roof safety control in underground coal mining, using fiber Bragg grating (FBG) material as a perceived element and transmission medium, has been developed. Compared with traditional monitoring equipment, the developed, novel monitoring system has the advantages of providing accurate, reliable, and continuous online monitoring of roof activities in underground coal mining. This is expected to further enable the prevention of catastrophic roof collapse accidents. The system has been successfully implemented at a deep hazardous roadway in Zhuji Coal Mine, China. Monitoring results from the study site have demonstrated the advantages of FBG-based sensors over traditional monitoring approaches. The dynamic impacts of progressive face advance on roof displacement and stress have been accurately captured by the novel roadway roof activity and safety monitoring system, which provided essential references for roadway support and design of the mine. PMID:27775657

Navigating towards improved surgical safety using aviation-based strategies.

PubMed

Kao, Lillian S; Thomas, Eric J

2008-04-01

Safety practices in the aviation industry are being increasingly adapted to healthcare in an effort to reduce medical errors and patient harm. However, caution should be applied in embracing these practices because of limited experience in surgical disciplines, lack of rigorous research linking these practices to outcome, and fundamental differences between the two industries. Surgeons should have an in-depth understanding of the principles and data supporting aviation-based safety strategies before routinely adopting them. This paper serves as a review of strategies adapted to improve surgical safety, including the following: implementation of crew resource management in training operative teams; incorporation of simulation in training of technical and nontechnical skills; and analysis of contributory factors to errors using surveys, behavioral marker systems, human factors analysis, and incident reporting. Avenues and challenges for future research are also discussed.

Rational design for multifunctional non-liposomal lipid-based nanocarriers for cancer management: theory to practice

PubMed Central

2013-01-01

Nanomedicines have gained more and more attention in cancer therapy thanks to their ability to enhance the tumour accumulation and the intracellular uptake of drugs while reducing their inactivation and toxicity. In parallel, nanocarriers have been successfully employed as diagnostic tools increasing imaging resolution holding great promises both in preclinical research and in clinical settings. Lipid-based nanocarriers are a class of biocompatible and biodegradable vehicles that provide advanced delivery of therapeutic and imaging agents, improving pharmacokinetic profile and safety. One of most promising engineering challenges is the design of innovative and versatile multifunctional targeted nanotechnologies for cancer treatment and diagnosis. This review aims to highlight rational approaches to design multifunctional non liposomal lipid-based nanocarriers providing an update of literature in this field. PMID:24564841