National Dam Safety Program. Cadet Mine Tailings Dam (MO 30715), Mississippi - Kaskaskia - St. Louis Basin, Washington County, Missouri. Phase I Inspection Report.

DTIC Science & Technology

1980-02-01

Safety Inspection of Dams" are not available. These studies should be performed by a professional engineer experienced in the design and construction...engineer experienced in the design and construction of tailings dams. An inspection and maintenance program should be initiated. Periodic inspections...Page No. SECTION 1 - PROJECT INFORMATION 1.1 General 1 1.2 Description of Project 1 1.3 Pertinent Data 2 SECTION 2 - ENGINEERING DATA 2.1 Design 5 2.2

MODU marine safety: Structural inspection and readiness surveys

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cole, M.W.; Marucci, T.F.; Taft, D.G.

1987-11-01

Several years ago, Exxon instituted a survey of mobile offshore drilling units (MODU's) under contract to the corporation to evaluate structural integrity and readiness to respond properly to marine emergencies. This paper briefly describes results of the inspections and our on-going marine safety program. Industry activity is also highlighted.

33 CFR 159.97 - Safety: inspected vessels.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Safety: inspected vessels. 159.97...) POLLUTION MARINE SANITATION DEVICES Design, Construction, and Testing § 159.97 Safety: inspected vessels. The Commanding Officer, USCG Marine Safety Center, approves the design and construction of devices to...

33 CFR 159.97 - Safety: inspected vessels.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Safety: inspected vessels. 159.97...) POLLUTION MARINE SANITATION DEVICES Design, Construction, and Testing § 159.97 Safety: inspected vessels. The Commanding Officer, USCG Marine Safety Center, approves the design and construction of devices to...

33 CFR 159.97 - Safety: inspected vessels.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Safety: inspected vessels. 159.97...) POLLUTION MARINE SANITATION DEVICES Design, Construction, and Testing § 159.97 Safety: inspected vessels. The Commanding Officer, USCG Marine Safety Center, approves the design and construction of devices to...

33 CFR 159.97 - Safety: inspected vessels.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Safety: inspected vessels. 159.97...) POLLUTION MARINE SANITATION DEVICES Design, Construction, and Testing § 159.97 Safety: inspected vessels. The Commanding Officer, USCG Marine Safety Center, approves the design and construction of devices to...

76 FR 24713 - Cooperative Inspection Programs: Interstate Shipment of Meat and Poultry Products

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-02

...The Food Safety and Inspection Service (FSIS) is amending the Federal meat and poultry products inspection regulations to establish a new voluntary cooperative program under which State-inspected establishments with 25 or fewer employees will be eligible to ship meat and poultry products in interstate commerce. In participating States, State-inspected establishments selected to take part in this program will be required to comply with all Federal standards under the Federal Meat Inspection Act (FMIA) and the Poultry Products Inspection Act (PPIA). These establishments will receive inspection services from State inspection personnel that have been trained in the enforcement of the FMIA and PPIA. Meat and poultry products produced under the program that have been inspected and passed by designated State personnel will bear an official Federal mark of inspection and will be permitted to be distributed in interstate commerce. FSIS will provide oversight and enforcement of the program.

[Recommendations for inspections of the French nuclear safety authority].

PubMed

Rousse, C; Chauvet, B

2015-10-01

The French nuclear safety authority is responsible for the control of radiation protection in radiotherapy since 2002. Controls are based on the public health and the labour codes and on the procedures defined by the controlled health care facility for its quality and safety management system according to ASN decision No. 2008-DC-0103. Inspectors verify the adequacy of the quality and safety management procedures and their implementation, and select process steps on the basis of feedback from events notified to ASN. Topics of the inspection are communicated to the facility at the launch of a campaign, which enables them to anticipate the inspectors' expectations. In cases where they are not physicians, inspectors are not allowed to access information covered by medical confidentiality. The consulted documents must therefore be expunged of any patient-identifying information. Exchanges before the inspection are intended to facilitate the provision of documents that may be consulted. Finally, exchange slots between inspectors and the local professionals must be organized. Based on improvements achieved by the health care centres and on recommendations from a joint working group of radiotherapy professionals and the nuclear safety authority, changes will be made in the control procedure that will be implemented when developing the inspection program for 2016-2019. Copyright © 2015. Published by Elsevier SAS.

29 CFR 1960.25 - Qualifications of safety and health inspectors and agency inspections.

Code of Federal Regulations, 2012 CFR

2012-07-01

... environments where there are less complex hazards, such safety and health specializations as cited above may... 29 Labor 9 2012-07-01 2012-07-01 false Qualifications of safety and health inspectors and agency... OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Inspection and Abatement § 1960.25 Qualifications...

29 CFR 1960.25 - Qualifications of safety and health inspectors and agency inspections.

Code of Federal Regulations, 2010 CFR

2010-07-01

... environments where there are less complex hazards, such safety and health specializations as cited above may... 29 Labor 9 2010-07-01 2010-07-01 false Qualifications of safety and health inspectors and agency... OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Inspection and Abatement § 1960.25 Qualifications...

29 CFR 1960.25 - Qualifications of safety and health inspectors and agency inspections.

Code of Federal Regulations, 2014 CFR

2014-07-01

... environments where there are less complex hazards, such safety and health specializations as cited above may... 29 Labor 9 2014-07-01 2014-07-01 false Qualifications of safety and health inspectors and agency... OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Inspection and Abatement § 1960.25 Qualifications...

29 CFR 1960.25 - Qualifications of safety and health inspectors and agency inspections.

Code of Federal Regulations, 2011 CFR

2011-07-01

... environments where there are less complex hazards, such safety and health specializations as cited above may... 29 Labor 9 2011-07-01 2011-07-01 false Qualifications of safety and health inspectors and agency... OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Inspection and Abatement § 1960.25 Qualifications...

29 CFR 1960.25 - Qualifications of safety and health inspectors and agency inspections.

Code of Federal Regulations, 2013 CFR

2013-07-01

... environments where there are less complex hazards, such safety and health specializations as cited above may... 29 Labor 9 2013-07-01 2013-07-01 false Qualifications of safety and health inspectors and agency... OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Inspection and Abatement § 1960.25 Qualifications...

9 CFR 592.90 - Authority and duties of inspection program personnel performing service.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Authority and duties of inspection program personnel performing service. 592.90 Section 592.90 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG PRODUCTS INSPECTION VOLUNTARY INSPECTION OF EGG PRODUCTS Performance of Services § 592.90 Authorit...

9 CFR 592.90 - Authority and duties of inspection program personnel performing service.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Authority and duties of inspection program personnel performing service. 592.90 Section 592.90 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG PRODUCTS INSPECTION VOLUNTARY INSPECTION OF EGG PRODUCTS Performance of Services § 592.90 Authorit...

9 CFR 592.90 - Authority and duties of inspection program personnel performing service.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Authority and duties of inspection program personnel performing service. 592.90 Section 592.90 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG PRODUCTS INSPECTION VOLUNTARY INSPECTION OF EGG PRODUCTS Performance of Services § 592.90 Authorit...

Uniformity of roadside safety inspections of commercial vehicles and drivers on the national level

DOT National Transportation Integrated Search

2000-05-01

To examine the issue of roadside inspection uniformity, the Federal Motor Carrier Safety Administration (FMCSA) initiated a research project to provide practical information to FMCSA, commercial carriers, Motor Carrier Safety Assistance Program (MCSA...

9 CFR 592.90 - Authority and duties of inspection program personnel performing service.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Authority and duties of inspection program personnel performing service. 592.90 Section 592.90 Animals and Animal Products FOOD SAFETY AND..., certificates, seals, and reports of inspection program personnel; (4) To deface or remove, or cause to be...

9 CFR 592.90 - Authority and duties of inspection program personnel performing service.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Authority and duties of inspection program personnel performing service. 592.90 Section 592.90 Animals and Animal Products FOOD SAFETY AND..., certificates, seals, and reports of inspection program personnel; (4) To deface or remove, or cause to be...

33 CFR 159.97 - Safety: inspected vessels.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Safety: inspected vessels. 159.97 Section 159.97 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) POLLUTION MARINE SANITATION DEVICES Design, Construction, and Testing § 159.97 Safety: inspected vessels...

Grade pending: lessons for hospital quality reporting from the New York City restaurant sanitation inspection program.

PubMed

Ryan, Andrew M; Detsky, Allan S

2015-02-01

Public quality reporting programs have been widely implemented in hospitals in an effort to improve quality and safety. One such program is Hospital Compare, Medicare's national quality reporting program for US hospitals. The New York City sanitary grade inspection program is a parallel effort for restaurants. The aims of Hospital Compare and the New York City sanitary inspection program are fundamentally similar: to address a common market failure resulting from consumers' lack of information on quality and safety. However, by displaying easily understandable information at the point of service, the New York City sanitary inspection program is better designed to encourage informed consumer decision making. We argue that this program holds important lessons for public quality reporting of US hospitals. © 2014 Society of Hospital Medicine.

49 CFR 217.9 - Program of operational tests and inspections; recordkeeping.

Code of Federal Regulations, 2014 CFR

2014-10-01

... controls accessibility to such information retained in its electronic database system and identifies those... inspections required by this section, the Associate Administrator for Safety may, for cause stated, disapprove... disapproval decision. If the Associate Administrator for Safety disapproves the program, (1) The railroad has...

49 CFR 217.9 - Program of operational tests and inspections; recordkeeping.

Code of Federal Regulations, 2010 CFR

2010-10-01

... controls accessibility to such information retained in its electronic database system and identifies those... inspections required by this section, the Associate Administrator for Safety may, for cause stated, disapprove... disapproval decision. If the Associate Administrator for Safety disapproves the program, (1) The railroad has...

49 CFR 217.9 - Program of operational tests and inspections; recordkeeping.

Code of Federal Regulations, 2011 CFR

2011-10-01

... controls accessibility to such information retained in its electronic database system and identifies those... inspections required by this section, the Associate Administrator for Safety may, for cause stated, disapprove... disapproval decision. If the Associate Administrator for Safety disapproves the program, (1) The railroad has...

49 CFR 217.9 - Program of operational tests and inspections; recordkeeping.

Code of Federal Regulations, 2012 CFR

2012-10-01

... controls accessibility to such information retained in its electronic database system and identifies those... inspections required by this section, the Associate Administrator for Safety may, for cause stated, disapprove... disapproval decision. If the Associate Administrator for Safety disapproves the program, (1) The railroad has...

Car Seat Inspection Among Children Older Than Three: Using Data to Drive Practice in Child Passenger Safety

PubMed Central

Kroeker, Amber M.; Teddy, Amy J.; Macy, Michelle L.

2015-01-01

Background Motor vehicle crashes (MVCs) are a leading cause of unintentional death and disability among children ages 4-12 in the United States. Despite this high risk of injury from MVCs in this age group, parental awareness, and child passenger safety programs in particular may lack focus on this age group. Methods Retrospective cross-sectional analysis of child passenger safety seat checklist forms from two Safe Kids coalitions in Michigan (2013) to identify restraint type upon arrival to car seat inspections. Other variables included, if the coalition provided a new child safety seat and if the child had a sibling who underwent a car seat inspection. Chi-square statistics were used to compare change in restraint use upon arrival and at departure, the proportion of children attending a car seat inspection event by age, the age category of children by site, the proportion of children with siblings also undergoing a car seat inspection by age, and the distribution of a new child safety seat by age. Results Data were available from 1,316 Safe Kids Huron Valley and 3,215 Safe Kids Greater Grand Rapids car seat inspections. Just 10.8% of total seats inspected were booster seats. Child safety seats for infant and young children were more commonly inspected [rear-facing carrier (40.3%), rear-facing convertible (10.2%), and forward-facing (19.3%) car seats]. Few children at inspections used a seat belt only (5.4%) or had no restraint (13.8%). Children age 4 and above were found to be in a sub-optimal restraint at least 30% of the time. Conclusion Low proportions of parents use car seat inspections for children in the booster seat age group. The proportion of children departing the inspection in a more protective restraint increased with increasing age. This highlights an area of weakness in child passenger safety programs and signals an opportunity to strengthen efforts on The Forgotten Child. Level of Evidence Level III PMID:26308122

Overview of Energy Systems` safety analysis report programs. Safety Analysis Report Update Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-03-01

The primary purpose of an Safety Analysis Report (SAR) is to provide a basis for judging the adequacy of a facility`s safety. The SAR documents the safety analyses that systematically identify the hazards posed by the facility, analyze the consequences and risk of potential accidents, and describe hazard control measures that protect the health and safety of the public and employees. In addition, some SARs document, as Technical Safety Requirements (TSRs, which include Technical Specifications and Operational Safety Requirements), technical and administrative requirements that ensure the facility is operated within prescribed safety limits. SARs also provide conveniently summarized information thatmore » may be used to support procedure development, training, inspections, and other activities necessary to facility operation. This ``Overview of Energy Systems Safety Analysis Report Programs`` Provides an introduction to the programs and processes used in the development and maintenance of the SARs. It also summarizes some of the uses of the SARs within Energy Systems and DOE.« less

National Dam Safety Program. Manalapan Lake Dam (NJ00293), Raritan River Basin, Manalapan Brook, Middlesex County, New Jersey. Phase I Inspection Report.

DTIC Science & Technology

1979-04-01

NJ00293 1. OOVT ACCESSION NO. 4. TITLE (and Submit) Phase I Inspection Report National Dan Safety Program Manalapan Lake Dam Middlesea County...ssthoriistioa of set, Fsblic Lsw M- Ss7 . k brlsf assasaasat of ths ssa’s csssltlss is giwaa is ths frost of ths rsaort. oa wlsssl iaasostlaa, svallsbla

Car seat inspection among children older than 3 years: Using data to drive practice in child passenger safety.

PubMed

Kroeker, Amber M; Teddy, Amy J; Macy, Michelle L

2015-09-01

Motor vehicle crashes are the leading cause of unintentional death and disability among children 4 years to 12 years of age in the United States. Despite the high risk of injury from motor vehicle crashes in this age group, parental awareness and child passenger safety programs in particular may lack focus on this age group. This is a retrospective cross-sectional analysis of child passenger safety seat checklist forms from two Safe Kids coalitions in Michigan (2013) to identify restraint type upon arrival to car seat inspections. Other variables were included if the coalition provided a new child safety seat and if the child had a sibling who underwent a car seat inspection. χ statistics were used to compare change in restraint use on arrival and at departure, the proportion of children attending a car seat inspection event by age, the age category of children by site, the proportion of children with siblings also undergoing a car seat inspection by age, and the distribution of a new child safety seat by age. Data were available from 1,316 Safe Kids Huron Valley and 3,215 Safe Kids Greater Grand Rapids car seat inspections. Just 10.8% of the total seats inspected were booster seats. Child safety seats for infant and young children were more commonly inspected (rear-facing carrier [40.3%], rear-facing convertible [10.2%], and forward-facing [19.3%] car seats). Few children at inspections used a seat belt only (5.4%) or had no restraint (13.8%). Children 4 years and older were found to be in a suboptimal restraint at least 30% of the time. Low proportions of parents use car seat inspections for children in the booster seat age group. The proportion of children departing the inspection in a more protective restraint increased with increasing age. This highlights an area of weakness in child passenger safety programs and signals an opportunity to strengthen efforts on The Booster Age Child. Epidemiologic/prognostic study, level III.

(abstract) Formal Inspection Technology Transfer Program

NASA Technical Reports Server (NTRS)

Welz, Linda A.; Kelly, John C.

1993-01-01

A Formal Inspection Technology Transfer Program, based on the inspection process developed by Michael Fagan at IBM, has been developed at JPL. The goal of this program is to support organizations wishing to use Formal Inspections to improve the quality of software and system level engineering products. The Technology Transfer Program provides start-up materials and assistance to help organizations establish their own Formal Inspection program. The course materials and certified instructors associated with the Technology Transfer Program have proven to be effective in classes taught at other NASA centers as well as at JPL. Formal Inspections (NASA tailored Fagan Inspections) are a set of technical reviews whose objective is to increase quality and reduce the cost of software development by detecting and correcting errors early. A primary feature of inspections is the removal of engineering errors before they amplify into larger and more costly problems downstream in the development process. Note that the word 'inspection' is used differently in software than in a manufacturing context. A Formal Inspection is a front-end quality enhancement technique, rather than a task conducted just prior to product shipment for the purpose of sorting defective systems (manufacturing usage). Formal Inspections are supporting and in agreement with the 'total quality' approach being adopted by many NASA centers.

NDT applications in a successful fracture critical bridge inspection program and anchor bolt inspection program

NASA Astrophysics Data System (ADS)

Fish, Philip E.

1995-05-01

In 1978, Wisconsin Department of Transportation discovered major cracking on a two-girder, fracture critical structure, just four years after it was constructed. In 1981, on the same structure, now seven years old, major cracking was discovered in the tie girder flange of the tied arch span. This is one example of the type of failures that transportation departments discovered on welded structures in the 1970's and '80's. The failures from welded details and pinned connections lead to much stricter standards for present day designs. All areas were affected: design with identification of fatigue-prone details and classification of fatigue categories; material requirements with emphasis on toughness and weldability; increased welding and fabrication standards with licensure of fabrication shops to minimum quality standards including personnel; and an increased effort on inspection of existing bridges, where critical details were overlooked or missed in the past. FHWA inspection requirements for existing structures increased through this same time period, in reaction to the failures that had occurred. Obviously, many structures in Wisconsin were not built to the standards now required, thus the importance for quality inspection techniques. The new FHWA inspection requirements now being implemented throughout the nation require an in-depth, hands-on type inspection at a specified frequency, on all fracture critical structures. Wisconsin Department of Transportation started an in-depth inspection program in 1985 and made it a full time program in 1987. This program included extensive nondestructive testing. Ultrasonic inspection has played a major role in this type of inspection. All fracture critical structures, pin and hanger systems, and pinned connections are inspected on a five-year cycle now. The program requires an experienced inspection team and a practical inspection approach. Extensive preparation is required with review of all design, construction, and

National Program for Inspection of Non-Federal Dams. Lovejoy Pond Dam ME-00022, Androscoggin River Basin, North Wayne, Maine. Phase I Inspection Report.

DTIC Science & Technology

1979-04-01

programs for non-Federal dams. (3) To update, verify and complete the National Inventory of Dams. 1.2 DESCRIPTION OF PROJECT a. Location. The Lovejoy Pond...BUREAU OF STANDARDS- 1963-A 41 ANDROSCOGGIN RIVER BASIN NORTH WAYNE ,MAINE LOVEJOY POND DAM ME-00022 0 PHASE I INSPECTION REPORT NATIONAL DAM INSPECTION...side of necessar mnd idenifIr bioc Sigmmber) DAMS, INSPECTION, DAM SAFETY, * Androscoggin River Basin North Wayne, Maine Lovejoy Pond * 20. ABSTRACT

2011 Annual Criticality Safety Program Performance Summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andrea Hoffman

The 2011 review of the INL Criticality Safety Program has determined that the program is robust and effective. The review was prepared for, and fulfills Contract Data Requirements List (CDRL) item H.20, 'Annual Criticality Safety Program performance summary that includes the status of assessments, issues, corrective actions, infractions, requirements management, training, and programmatic support.' This performance summary addresses the status of these important elements of the INL Criticality Safety Program. Assessments - Assessments in 2011 were planned and scheduled. The scheduled assessments included a Criticality Safety Program Effectiveness Review, Criticality Control Area Inspections, a Protection of Controlled Unclassified Information Inspection,more » an Assessment of Criticality Safety SQA, and this management assessment of the Criticality Safety Program. All of the assessments were completed with the exception of the 'Effectiveness Review' for SSPSF, which was delayed due to emerging work. Although minor issues were identified in the assessments, no issues or combination of issues indicated that the INL Criticality Safety Program was ineffective. The identification of issues demonstrates the importance of an assessment program to the overall health and effectiveness of the INL Criticality Safety Program. Issues and Corrective Actions - There are relatively few criticality safety related issues in the Laboratory ICAMS system. Most were identified by Criticality Safety Program assessments. No issues indicate ineffectiveness in the INL Criticality Safety Program. All of the issues are being worked and there are no imminent criticality concerns. Infractions - There was one criticality safety related violation in 2011. On January 18, 2011, it was discovered that a fuel plate bundle in the Nuclear Materials Inspection and Storage (NMIS) facility exceeded the fissionable mass limit, resulting in a technical safety requirement (TSR) violation. The TSR limits

9 CFR 592.95 - Facilities and equipment to be furnished for use of inspection program personnel in performing...

Code of Federal Regulations, 2012 CFR

2012-01-01

... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Facilities and equipment to be furnished for use of inspection program personnel in performing service. 592.95 Section 592.95 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG PRODUCTS INSPECTION VOLUNTARY INSPECTION OF EGG PRODUCTS Performanc...

9 CFR 592.95 - Facilities and equipment to be furnished for use of inspection program personnel in performing...

Code of Federal Regulations, 2013 CFR

2013-01-01

... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Facilities and equipment to be furnished for use of inspection program personnel in performing service. 592.95 Section 592.95 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG PRODUCTS INSPECTION VOLUNTARY INSPECTION OF EGG PRODUCTS Performanc...

9 CFR 592.95 - Facilities and equipment to be furnished for use of inspection program personnel in performing...

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Facilities and equipment to be furnished for use of inspection program personnel in performing service. 592.95 Section 592.95 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG PRODUCTS INSPECTION VOLUNTARY INSPECTION OF EGG PRODUCTS Performanc...

9 CFR 592.95 - Facilities and equipment to be furnished for use of inspection program personnel in performing...

Code of Federal Regulations, 2014 CFR

2014-01-01

... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Facilities and equipment to be furnished for use of inspection program personnel in performing service. 592.95 Section 592.95 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG PRODUCTS INSPECTION VOLUNTARY INSPECTION OF EGG PRODUCTS Performanc...

Evaluating the effectiveness of a logger safety training program.

PubMed

Bell, Jennifer L; Grushecky, Shawn T

2006-01-01

Logger safety training programs are rarely, if ever, evaluated as to their effectiveness in reducing injuries. Workers' compensation claim rates were used to evaluate the effectiveness of a logger safety training program, the West Virginia Loggers' Safety Initiative (LSI). There was no claim rate decline detected in the majority (67%) of companies that participated in all 4 years of the LSI. Furthermore, their rate did not differ from the rest of the WV logging industry that did not participate in the LSI. Worker turnover was significantly related to claim rates; companies with higher turnover of employees had higher claim rates. Companies using feller bunchers to harvest trees at least part of the time had a significantly lower claim rate than companies not using them. Companies that had more inspections per year had lower claim rates. High injury rates persist even in companies that receive safety training; high employee turnover may affect the efficacy of training programs. The logging industry should be encouraged to facilitate the mechanization of logging tasks, to address barriers to employee retention, and to increase the number of in-the-field performance monitoring inspections. Impact on industry There are many states whose logger safety programs include only about 4-8 hours of safe work practices training. These states may look to West Virginia's expanded training program (the LSI) as a model for their own programs. However, the LSI training may not be reaching loggers due to the delay in administering training to new employees and high levels of employee turnover. Regardless of training status, loggers' claim rates decline significantly the longer they work for a company. It may be that high injury rates in the state of West Virginia would be best addressed by finding ways to encourage and facilitate companies to become more mechanized in their harvesting practices, and to increase employee tenure. Increasing the number of yearly performance inspections

9 CFR 592.95 - Facilities and equipment to be furnished for use of inspection program personnel in performing...

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Facilities and equipment to be furnished for use of inspection program personnel in performing service. 592.95 Section 592.95 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG PRODUCTS INSPECTION...

14 CFR 91.1109 - Aircraft maintenance: Inspection program.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 2 2012-01-01 2012-01-01 false Aircraft maintenance: Inspection program... Ownership Operations Program Management § 91.1109 Aircraft maintenance: Inspection program. Each program... conduct of inspections for the particular make and model aircraft, including necessary tests and checks...

14 CFR 91.1109 - Aircraft maintenance: Inspection program.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Aircraft maintenance: Inspection program... Ownership Operations Program Management § 91.1109 Aircraft maintenance: Inspection program. Each program... conduct of inspections for the particular make and model aircraft, including necessary tests and checks...

14 CFR 91.1109 - Aircraft maintenance: Inspection program.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 2 2014-01-01 2014-01-01 false Aircraft maintenance: Inspection program... Ownership Operations Program Management § 91.1109 Aircraft maintenance: Inspection program. Each program... conduct of inspections for the particular make and model aircraft, including necessary tests and checks...

Safety inspections in construction sites: A systems thinking perspective.

PubMed

Saurin, Tarcisio Abreu

2016-08-01

Although safety inspections carried out by government officers are important for the prevention of accidents, there is little in-depth knowledge on their outcomes and processes leading to these. This research deals with this gap by using systems thinking (ST) as a lens for obtaining insights into safety inspections in construction sites. Thirteen case studies of sites with prohibited works were carried out, discussing how four attributes of ST were used in the inspections. The studies were undertaken over 6 years, and sources of evidence involved participant observation, direct observations, analysis of documents and interviews. Two complementary ways for obtaining insights into inspections, based on ST, were identified: (i) the design of the study itself needs to be in line with ST; and (ii) data collection and analysis should focus on the agents involved in the inspections, the interactions between agents, the constraints and opportunities faced by agents, the outcomes of interactions, and the recommendations for influencing interactions. Copyright © 2015 Elsevier Ltd. All rights reserved.

National Dam Safety Program. Watchung Lake Dam (NJ00767), Raritan River Basin, Stony Brook, Somerset County, New Jersey Phase I Inspection Report.

DTIC Science & Technology

1981-07-01

Safety Program Erosion Embankmients Watchung Lake Dam, N.J. Visual InspectionSeae IStructural Analysis Spillways 12M~ A0ST Acr (cathiue samvwgip @ta N...determined by a qualified professional consultant engaged by the owner using more sophisticated methods , procedures and studies within six months...be overtopped. (The SDF, in this instance, is one half of the Probable Maximum Flood). The decision to consider the spillway " inaae - quate" instead of

National Dam Safety Program. Diascund Reservoir Dam. Inventory Number: VA-12703. New Kent County, Virginia. Phase I Inspection Report.

DTIC Science & Technology

1979-03-01

iIIASQJII I ~SO~O1R I ~1Location: ~ r ~oi i ~air caurny, VII~INIA ~Inventory Number: VA .!:L.12703 1 - ,~ / ~ L~] PHASE I INSPECTION REPORT ‘ (9AT1ON...ak.lr.Sl sst tsd I ., MIoek 30. St ~~1l vwt ft... R p ert) - IS. SUPPLEMENTARY NOTES Copies are obtainable froB National Technica l Information...Service , Springfield , Virginia 22151 IL KEY BeRGS (C.” ~~ :. isua &~~ U 11 U4 SY i I ~~UU1)’ by block r ~~b.r) - Dam - VA National Darn Safety Program

46 CFR 153.1504 - Inspection of personnel emergency and safety equipment.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Inspection of personnel emergency and safety equipment... BULK DANGEROUS CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Operations Maintenance § 153.1504 Inspection of personnel emergency and safety equipment. The master shall...

Cargo container inspection test program at ARPA's Nonintrusive Inspection Technology Testbed

NASA Astrophysics Data System (ADS)

Volberding, Roy W.; Khan, Siraj M.

1994-10-01

An x-ray-based cargo inspection system test program is being conducted at the Advanced Research Project Agency (ARPA)-sponsored Nonintrusive Inspection Technology Testbed (NITT) located in the Port of Tacoma, Washington. The test program seeks to determine the performance that can be expected from a dual, high-energy x-ray cargo inspection system when inspecting ISO cargo containers. This paper describes an intensive, three-month, system test involving two independent test groups, one representing the criminal smuggling element and the other representing the law enforcement community. The first group, the `Red Team', prepares ISO containers for inspection at an off-site facility. An algorithm randomly selects and indicates the positions and preparation of cargoes within a container. The prepared container is dispatched to the NITT for inspection by the `Blue Team'. After in-gate processing, it is queued for examination. The Blue Team inspects the container and decides whether or not to pass the container. The shipment undergoes out-gate processing and returns to the Red Team. The results of the inspection are recorded for subsequent analysis. The test process, including its governing protocol, the cargoes, container preparation, the examination and results available at the time of submission are presented.

Demystifying the Occupational Safety and Health Administration inspection process.

PubMed

Price, Lowell L; Goodman, Terri

2006-04-01

Being prepared for an Occupational Safety and Health Administration (OSHA) inspection can save a facility money, as well as potentially protect employees from serious illness or injury. This article explains the OSHA inspection process, types of violations that may be cited and the appeals process for employers and employees. Actual citations given in four recent OSHA health care facility inspections are discussed and general recommendations to prepare for an OSHA site visit are given.

29 CFR 1960.31 - Inspections by OSHA.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... scheduled inspections as an integral part of OSHA's evaluation of an agency's safety and health program in...

29 CFR 1960.31 - Inspections by OSHA.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... scheduled inspections as an integral part of OSHA's evaluation of an agency's safety and health program in...

29 CFR 1960.31 - Inspections by OSHA.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... scheduled inspections as an integral part of OSHA's evaluation of an agency's safety and health program in...

29 CFR 1960.31 - Inspections by OSHA.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... scheduled inspections as an integral part of OSHA's evaluation of an agency's safety and health program in...

29 CFR 1960.31 - Inspections by OSHA.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... scheduled inspections as an integral part of OSHA's evaluation of an agency's safety and health program in...

Overview of Energy Systems' safety analysis report programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-03-01

The primary purpose of an Safety Analysis Report (SAR) is to provide a basis for judging the adequacy of a facility's safety. The SAR documents the safety analyses that systematically identify the hazards posed by the facility, analyze the consequences and risk of potential accidents, and describe hazard control measures that protect the health and safety of the public and employees. In addition, some SARs document, as Technical Safety Requirements (TSRs, which include Technical Specifications and Operational Safety Requirements), technical and administrative requirements that ensure the facility is operated within prescribed safety limits. SARs also provide conveniently summarized information thatmore » may be used to support procedure development, training, inspections, and other activities necessary to facility operation. This Overview of Energy Systems Safety Analysis Report Programs'' Provides an introduction to the programs and processes used in the development and maintenance of the SARs. It also summarizes some of the uses of the SARs within Energy Systems and DOE.« less

DEVELOPMENT OF A SAFETY COMMUNICATION AND RECOGNITION PROGRAM FOR CONSTRUCTION

PubMed Central

SPARER, EMILY H.; HERRICK, ROBERT F.; DENNERLEIN, JACK T.

2017-01-01

Leading-indicator–based (e.g., hazard recognition) incentive programs provide an alternative to controversial lagging-indicator–based (e.g., injury rates) programs. We designed a leading-indicator–based safety communication and recognition program that incentivized safe working conditions. The program was piloted for two months on a commercial construction worksite, and then redesigned using qualitative interview and focus group data from management and workers. We then ran the redesigned program for six months on the same worksite. Foremen received detailed weekly feedback from safety inspections, and posters displayed worksite and subcontractor safety scores. In the final program design, the whole site, not individual subcontractors, was the unit of analysis and recognition. This received high levels of acceptance from workers, who noted increased levels of site unity and team-building. This pilot program showed that construction workers value solidarity with others on site, demonstrating the importance of health and safety programs that engage all workers through a reliable and consistent communication infrastructure. PMID:25815741

Food Safety and Quality. Uniform, Risk-Based Inspection System Needed to Ensure Safe Food Supply,

DTIC Science & Technology

1992-06-01

Concerned about the effectiveness of the federal food safety inspection system, the Chairman, Subcommittee on Oversight and Investigations, House...federal resources for inspection, and (3) agencies are effectively coordinating their food safety and quality inspection efforts.

Railroad safety program, task 2

NASA Technical Reports Server (NTRS)

1983-01-01

Aspects of railroad safety and the preparation of a National Inspection Plan (NIP) for rail safety improvement are examined. Methodology for the allocation of inspection resources, preparation of a NIP instruction manual, and recommendations for future NIP, are described. A statistical analysis of regional rail accidents is presented with causes and suggested preventive measures included.

Management of radioactive material safety programs at medical facilities. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Camper, L.W.; Schlueter, J.; Woods, S.

A Task Force, comprising eight US Nuclear Regulatory Commission and two Agreement State program staff members, developed the guidance contained in this report. This report describes a systematic approach for effectively managing radiation safety programs at medical facilities. This is accomplished by defining and emphasizing the roles of an institution`s executive management, radiation safety committee, and radiation safety officer. Various aspects of program management are discussed and guidance is offered on selecting the radiation safety officer, determining adequate resources for the program, using such contractual services as consultants and service companies, conducting audits, and establishing the roles of authorized usersmore » and supervised individuals; NRC`s reporting and notification requirements are discussed, and a general description is given of how NRC`s licensing, inspection and enforcement programs work.« less

FMCSA safety program effectiveness measurement : roadside intervention effectiveness model FY 2013 : analysis brief.

DOT National Transportation Integrated Search

2017-08-01

The Roadside Inspection and Traffic Enforcement programs are two of FMCSAs most powerful safety tools. By continually examining the results of these programs, FMCSA can ensure that they are being executed effectively and are producing the desired ...

[Legislation and inspection for the health and safety of workers. Efficacy and limits].

PubMed

Tozzi, G A

2009-01-01

To provide information regarding Occupational Health and Safety (OHS) Inspections in Europe. The dynamics that are transforming regulatory subsystems and complementary inspection services are described. Simplification initiatives, the limits and difficulties of applying the different models of Health and Safety Management Systems are discussed. Examples are given on how to evaluate legislation and technical standards during planning and enforcement. Different approaches for studying characteristics, methodologies and efficacy in practice of OHS Inspection are provided. Targeted inspections need to respond to the needs of enterprises and workers. Impartiality must be guaranteed and workers' participation should be facilitated.

Applying program comprehension techniques to improve software inspections

NASA Technical Reports Server (NTRS)

Rifkin, Stan; Deimel, Lionel

1994-01-01

Software inspections are widely regarded as a cost-effective mechanism for removing defects in software, though performing them does not always reduce the number of customer-discovered defects. We present a case study in which an attempt was made to reduce such defects through inspection training that introduced program comprehension ideas. The training was designed to address the problem of understanding the artifact being reviewed, as well as other perceived deficiencies of the inspection process itself. Measures, both formal and informal, suggest that explicit training in program understanding may improve inspection effectiveness.

National Dam Safety Program. J. Bristow Lake Dam (MO 30985), Mississippi - Kaskaskia - St. Louis River Basin, Crawford County, Missouri. Phase I Inspection Report.

DTIC Science & Technology

1980-08-01

8217 m’-* k TOW LAKE DAM -- CRAWFORD COUNTY, MISSOURI * ~MO 30MS PHASE 1 INSPECTION REPORT NATIONAL DAM SAFETY PROGRAM Unkd Ska AnviV €Ow" of Ifntineers I...REPORT NUMBER Crawford County, Missouri 7. AUTHOR() 1 . CONTRACT OR GRANT NUMBER(@) Anderson Engineering, Inc. D6ACW4 3-8j-C-#73 9. PERFORMING ORGANIZATION...oF 1 MOV SS IS O~LET’E 𔄃UNCLASSIFIED SECUFITY CLASSIFICATION OF THIS PAGE (When Dote Entered) SI ’ SECURITY CLASSIFICATION OF THIS PAOR(3SOM DOS a

Development of a safety communication and recognition program for construction.

PubMed

Sparer, Emily H; Herrick, Robert F; Dennerlein, Jack T

2015-05-01

Leading-indicator-based (e.g., hazard recognition) incentive programs provide an alternative to controversial lagging-indicator-based (e.g., injury rates) programs. We designed a leading-indicator-based safety communication and recognition program that incentivized safe working conditions. The program was piloted for two months on a commercial construction worksite and then redesigned using qualitative interview and focus group data from management and workers. We then ran the redesigned program for six months on the same worksite. Foremen received detailed weekly feedback from safety inspections, and posters displayed worksite and subcontractor safety scores. In the final program design, the whole site, not individual subcontractors, was the unit of analysis and recognition. This received high levels of acceptance from workers, who noted increased levels of site unity and team-building. This pilot program showed that construction workers value solidarity with others on site, demonstrating the importance of health and safety programs that engage all workers through a reliable and consistent communication infrastructure. © The Author(s) 2015 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

49 CFR 237.103 - Bridge inspection procedures.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Bridge inspection procedures. 237.103 Section 237... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION BRIDGE SAFETY STANDARDS Bridge Inspection § 237.103 Bridge inspection procedures. (a) Each bridge management program shall specify the procedure to be used for...

49 CFR 237.103 - Bridge inspection procedures.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Bridge inspection procedures. 237.103 Section 237... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION BRIDGE SAFETY STANDARDS Bridge Inspection § 237.103 Bridge inspection procedures. (a) Each bridge management program shall specify the procedure to be used for...

Wireless Roadside Inspection Proof of Concept Test Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Capps, Gary J; Franzese, Oscar; Knee, Helmut E

2009-03-01

The U.S. Department of Transportation (DOT) FMCSA commissioned the Wireless Roadside Inspection (WRI) Program to validate technologies and methodologies that can improve safety through inspections using wireless technologies that convey real-time identification of commercial vehicles, drivers, and carriers, as well as information about the condition of the vehicles and their drivers. It is hypothesized that these inspections will: -- Increase safety -- Decrease the number of unsafe commercial vehicles on the road; -- Increase efficiency -- Speed up the inspection process, enabling more inspections to occur, at least on par with the number of weight inspections; -- Improve effectiveness --more » Reduce the probability of drivers bypassing CMV inspection stations and increase the likelihood that fleets will attempt to meet the safety regulations; and -- Benefit industry -- Reduce fleet costs, provide good return-on-investment, minimize wait times, and level the playing field. The WRI Program is defined in three phases which are: Phase 1: Proof of Concept Test (POC) Testing of commercially available off-the-shelf (COTS) or near-COTS technology to validate the wireless inspection concept. Phase 2: Pilot Test Safety technology maturation and back office system integration Phase 3: Field Operational Test Multi-vehicle testing over a multi-state instrumented corridor This report focuses on Phase 1 efforts that were initiated in March, 2006. Technical efforts dealt with the ability of a Universal Wireless Inspection System (UWIS) to collect driver, vehicle, and carrier information; format a Safety Data Message Set from this information; and wirelessly transmit a Safety Data Message Set to a roadside receiver unit or mobile enforcement vehicle.« less

Pressure Safety Program Implementation at ORNL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lower, Mark; Etheridge, Tom; Oland, C. Barry

2013-01-01

The Oak Ridge National Laboratory (ORNL) is a US Department of Energy (DOE) facility that is managed by UT-Battelle, LLC. In February 2006, DOE promulgated worker safety and health regulations to govern contractor activities at DOE sites. These regulations, which are provided in 10 CFR 851, Worker Safety and Health Program, establish requirements for worker safety and health program that reduce or prevent occupational injuries, illnesses, and accidental losses by providing DOE contractors and their workers with safe and healthful workplaces at DOE sites. The regulations state that contractors must achieve compliance no later than May 25, 2007. According tomore » 10 CFR 851, Subpart C, Specific Program Requirements, contractors must have a structured approach to their worker safety and health programs that at a minimum includes provisions for pressure safety. In implementing the structured approach for pressure safety, contractors must establish safety policies and procedures to ensure that pressure systems are designed, fabricated, tested, inspected, maintained, repaired, and operated by trained, qualified personnel in accordance with applicable sound engineering principles. In addition, contractors must ensure that all pressure vessels, boilers, air receivers, and supporting piping systems conform to (1) applicable American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code (2004) Sections I through XII, including applicable code cases; (2) applicable ASME B31 piping codes; and (3) the strictest applicable state and local codes. When national consensus codes are not applicable because of pressure range, vessel geometry, use of special materials, etc., contractors must implement measures to provide equivalent protection and ensure a level of safety greater than or equal to the level of protection afforded by the ASME or applicable state or local codes. This report documents the work performed to address legacy pressure vessel deficiencies and

Level of Service Program for INDOT Operations : APPENDIX A State Inspection Programs

DOT National Transportation Integrated Search

2012-01-01

INDOT has used an inspection program named Maintenance Quality Survey (MQS) to perform a statewide inspection of their roadway assets, rightofway to rightofway. This inspection requires two twoperson teams approximately 18 months to...

ANNUAL RADIOACTIVE WASTE TANK INSPECTION PROGRAM - 2011

DOE Office of Scientific and Technical Information (OSTI.GOV)

West, B.; Waltz, R.

2012-06-21

Aqueous radioactive wastes from Savannah River Site (SRS) separations and vitrification processes are contained in large underground carbon steel tanks. Inspections made during 2011 to evaluate these vessels and other waste handling facilities along with evaluations based on data from previous inspections are the subject of this report. The 2011 inspection program revealed that the structural integrity and waste confinement capability of the Savannah River Site waste tanks were maintained. All inspections scheduled per SRR-LWE-2011-00026, HLW Tank Farm Inspection Plan for 2011, were completed. Ultrasonic measurements (UT) performed in 2011 met the requirements of C-ESR-G-00006, In-Service Inspection Program for Highmore » Level Waste Tanks, Rev. 3, and WSRC-TR-2002-00061, Rev.6. UT inspections were performed on Tanks 25, 26 and 34 and the findings are documented in SRNL-STI-2011-00495, Tank Inspection NDE Results for Fiscal Year 2011, Waste Tanks 25, 26, 34 and 41. A total of 5813 photographs were made and 835 visual and video inspections were performed during 2011. A potential leaksite was discovered at Tank 4 during routine annual inspections performed in 2011. The new crack, which is above the allowable fill level, resulted in no release to the environment or tank annulus. The location of the crack is documented in C-ESR-G-00003, SRS High Level Waste Tank Leaksite Information, Rev.6.« less

ANNUAL RADIOACTIVE WASTE TANK INSPECTION PROGRAM- 2007

DOE Office of Scientific and Technical Information (OSTI.GOV)

West, B; Ruel Waltz, R

2008-06-05

Aqueous radioactive wastes from Savannah River Site (SRS) separations and vitrification processes are contained in large underground carbon steel tanks. The 2007 inspection program revealed that the structural integrity and waste confinement capability of the Savannah River Site waste tanks were maintained. A very small amount of material had seeped from Tank 12 from a previously identified leaksite. The material observed had dried on the tank wall and did not reach the annulus floor. A total of 5945 photographs were made and 1221 visual and video inspections were performed during 2007. Additionally, ultrasonic testing was performed on four Waste Tanksmore » (15, 36, 37 and 38) in accordance with approved inspection plans that met the requirements of WSRC-TR-2002- 00061, Revision 2 'In-Service Inspection Program for High Level Waste Tanks'. The Ultrasonic Testing (UT) In-Service Inspections (ISI) are documented in a separate report that is prepared by the ISI programmatic Level III UT Analyst. Tanks 15, 36, 37 and 38 are documented in 'Tank Inspection NDE Results for Fiscal Year 2007'; WSRC-TR-2007-00064.« less

14 CFR 135.419 - Approved aircraft inspection program.

Code of Federal Regulations, 2010 CFR

2010-01-01

... OPERATING REQUIREMENTS: COMMUTER AND ON DEMAND OPERATIONS AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Maintenance, Preventive Maintenance, and Alterations § 135.419 Approved aircraft inspection program. (a... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Approved aircraft inspection program. 135...

14 CFR 135.419 - Approved aircraft inspection program.

Code of Federal Regulations, 2012 CFR

2012-01-01

... OPERATING REQUIREMENTS: COMMUTER AND ON DEMAND OPERATIONS AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Maintenance, Preventive Maintenance, and Alterations § 135.419 Approved aircraft inspection program. (a... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Approved aircraft inspection program. 135...

14 CFR 135.419 - Approved aircraft inspection program.

Code of Federal Regulations, 2013 CFR

2013-01-01

... OPERATING REQUIREMENTS: COMMUTER AND ON DEMAND OPERATIONS AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Maintenance, Preventive Maintenance, and Alterations § 135.419 Approved aircraft inspection program. (a... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Approved aircraft inspection program. 135...

14 CFR 135.419 - Approved aircraft inspection program.

Code of Federal Regulations, 2014 CFR

2014-01-01

... OPERATING REQUIREMENTS: COMMUTER AND ON DEMAND OPERATIONS AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Maintenance, Preventive Maintenance, and Alterations § 135.419 Approved aircraft inspection program. (a... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Approved aircraft inspection program. 135...

14 CFR 135.419 - Approved aircraft inspection program.

Code of Federal Regulations, 2011 CFR

2011-01-01

... OPERATING REQUIREMENTS: COMMUTER AND ON DEMAND OPERATIONS AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Maintenance, Preventive Maintenance, and Alterations § 135.419 Approved aircraft inspection program. (a... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Approved aircraft inspection program. 135...

Food safety in food services in Lombardy: proposal for an inspection-scoring model

PubMed Central

Balzaretti, Claudia M.; Razzini, Katia; Ziviani, Silvia; Ratti, Sabrina; Milicevic, Vesna; Chiesa, Luca M.; Panseri, Sara; Castrica, Marta

2017-01-01

The purpose of this study was to elaborate a checklist with an inspection scoring system at national level in order to assess compliance with sanitary hygiene requirements of food services. The inspection scoring system was elaborated taking into account the guidelines drawn up by NYC Department of Food Safety and Mental Hygiene. Moreover the checklist was used simultaneously with the standard inspection protocol adopted by Servizio Igiene Alimenti Nutrizione (Servizio Igiene Alimenti Nutrizione - Ss. I.A.N) and defined by D.G.R 6 March 2017 – n. X/6299 Lombardy Region. Ss. I.A.N protocol consists of a qualitative response according to which we have generated a new protocol with three different grading: A, B and C. The designed checklist was divided into 17 sections. Each section corresponds to prerequisites to be verified during the inspection. Every section includes the type of conformity to check and the type of violation: critical or general. Moreover, the failure to respect the expected compliance generates 4 severity levels that correspond to score classes. A total of 7 food services were checked with the two different inspection methods. The checklist results generated a food safety score for each food service that ranged from 0.0 (no flaws observed) to 187.2, and generates three grading class: A (0.0-28.0); B (29.0-70.0) and C (>71.00). The results from the Ss. I. A. N grading method and the checklist show positive correlation (r=0.94, P>0.01) suggesting that the methods are comparable. Moreover, our scoring checklist is an easy and unique method compared to standard and allows also managers to perform effective surveillance programs in food service. PMID:29564236

Food safety in food services in Lombardy: proposal for an inspection-scoring model.

PubMed

Balzaretti, Claudia M; Razzini, Katia; Ziviani, Silvia; Ratti, Sabrina; Milicevic, Vesna; Chiesa, Luca M; Panseri, Sara; Castrica, Marta

2017-10-20

The purpose of this study was to elaborate a checklist with an inspection scoring system at national level in order to assess compliance with sanitary hygiene requirements of food services. The inspection scoring system was elaborated taking into account the guidelines drawn up by NYC Department of Food Safety and Mental Hygiene. Moreover the checklist was used simultaneously with the standard inspection protocol adopted by Servizio Igiene Alimenti Nutrizione ( Servizio Igiene Alimenti Nutrizione - Ss. I.A.N) and defined by D.G.R 6 March 2017 - n. X/6299 Lombardy Region. Ss. I.A.N protocol consists of a qualitative response according to which we have generated a new protocol with three different grading: A, B and C. The designed checklist was divided into 17 sections. Each section corresponds to prerequisites to be verified during the inspection. Every section includes the type of conformity to check and the type of violation: critical or general. Moreover, the failure to respect the expected compliance generates 4 severity levels that correspond to score classes. A total of 7 food services were checked with the two different inspection methods. The checklist results generated a food safety score for each food service that ranged from 0.0 (no flaws observed) to 187.2, and generates three grading class: A (0.0-28.0); B (29.0-70.0) and C (>71.00). The results from the Ss. I. A. N grading method and the checklist show positive correlation ( r =0.94, P>0.01) suggesting that the methods are comparable. Moreover, our scoring checklist is an easy and unique method compared to standard and allows also managers to perform effective surveillance programs in food service.

Randomized government safety inspections reduce worker injuries with no detectable job loss.

PubMed

Levine, David I; Toffel, Michael W; Johnson, Matthew S

2012-05-18

Controversy surrounds occupational health and safety regulators, with some observers claiming that workplace regulations damage firms' competitiveness and destroy jobs and others arguing that they make workplaces safer at little cost to employers and employees. We analyzed a natural field experiment to examine how workplace safety inspections affected injury rates and other outcomes. We compared 409 randomly inspected establishments in California with 409 matched-control establishments that were eligible, but not chosen, for inspection. Compared with controls, randomly inspected employers experienced a 9.4% decline in injury rates (95% confidence interval = -0.177 to -0.021) and a 26% reduction in injury cost (95% confidence interval = -0.513 to -0.083). We find no evidence that these improvements came at the expense of employment, sales, credit ratings, or firm survival.

40 CFR 52.241 - Inspection and maintenance program.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS California § 52.241 Inspection and maintenance program. (a) [Reserved] (b) Approval. On June 5, 2009, the California Air Resources Board submitted a revision to the California Motor Vehicle Inspection and Maintenance Program (2009 I/M Revision) to satisfy...

40 CFR 52.241 - Inspection and maintenance program.

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS California § 52.241 Inspection and maintenance program. (a) [Reserved] (b) Approval. On June 5, 2009, the California Air Resources Board submitted a revision to the California Motor Vehicle Inspection and Maintenance Program (2009 I/M Revision) to satisfy...

40 CFR 52.241 - Inspection and maintenance program.

Code of Federal Regulations, 2013 CFR

2013-07-01

... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS California § 52.241 Inspection and maintenance program. (a) [Reserved] (b) Approval. On June 5, 2009, the California Air Resources Board submitted a revision to the California Motor Vehicle Inspection and Maintenance Program (2009 I/M Revision) to satisfy...

40 CFR 52.241 - Inspection and maintenance program.

Code of Federal Regulations, 2012 CFR

2012-07-01

... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS California § 52.241 Inspection and maintenance program. (a) [Reserved] (b) Approval. On June 5, 2009, the California Air Resources Board submitted a revision to the California Motor Vehicle Inspection and Maintenance Program (2009 I/M Revision) to satisfy...

49 CFR 109.3 - Inspections and Investigations.

Code of Federal Regulations, 2014 CFR

2014-10-01

....3 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS AND OIL TRANSPORTATION HAZARDOUS MATERIALS PROGRAM PROCEDURES Inspections and Investigations § 109.3 Inspections and Investigations. (a...

A preschool program for safety and injury prevention delivered by home visitors

PubMed Central

Johnston, B; Britt, J; D'Ambrosio, L; Mueller, B; Rivara, F

2000-01-01

Objective—To evaluate the feasibility, acceptability, and effectiveness of an injury prevention program delivered by school based home visitors to the families of low income children attending preschool enrichment programs in Washington State. Study sample—The families of children attending preschool Head Start programs in two regions were eligible. A total of 213 families (77.8% of those eligible) from intervention sites, and 149 families (71.9% of those eligible) from concurrent comparison sites, agreed to participate and completed the trial. Intervention—Trained school personnel conducted home safety inspections as part of a planned home visit. Intervention families were offered educational materials as well as smoke detectors, batteries, ipecac, and age appropriate car safety restraints based on results of the home inspection. Evaluation methods—At a repeat home visit three months later, the proportion of families with a positive change in injury prevention knowledge or behavior among those in the intervention group was compared with the proportion in the comparison group. Smoke detector presence and function were observed. Results—Among families without a working smoke detector at baseline, the intervention was associated with an increased probability of having a working detector at follow up (relative risk (RR) 3.3, 95% confidence interval (CI) 1.3 to 8.6). Intervention families were also more likely to report the presence of ipecac in the home (RR 4.7, 95% CI 3.0 to 7.3) at follow up and to have obtained an age appropriate booster seat (RR 4.1, 95% CI 1.9 to 8.8). The program was acceptable to client families and to the home visitors who conducted the intervention. Conclusions—Among the families of low income children enrolled in preschool enrichment programs, home safety inspections and the distribution of safety supplies by school based home visitors appears to improve knowledge and behavior related to poisoning, smoke detector installation

Efficiency improvement by navigated safety inspection involving visual clutter based on the random search model.

PubMed

Sun, Xinlu; Chong, Heap-Yih; Liao, Pin-Chao

2018-06-25

Navigated inspection seeks to improve hazard identification (HI) accuracy. With tight inspection schedule, HI also requires efficiency. However, lacking quantification of HI efficiency, navigated inspection strategies cannot be comprehensively assessed. This work aims to determine inspection efficiency in navigated safety inspection, controlling for the HI accuracy. Based on a cognitive method of the random search model (RSM), an experiment was conducted to observe the HI efficiency in navigation, for a variety of visual clutter (VC) scenarios, while using eye-tracking devices to record the search process and analyze the search performance. The results show that the RSM is an appropriate instrument, and VC serves as a hazard classifier for navigation inspection in improving inspection efficiency. This suggests a new and effective solution for addressing the low accuracy and efficiency of manual inspection through navigated inspection involving VC and the RSM. It also provides insights into the inspectors' safety inspection ability.

49 CFR 237.101 - Scheduling of bridge inspections.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Scheduling of bridge inspections. 237.101 Section... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION BRIDGE SAFETY STANDARDS Bridge Inspection § 237.101 Scheduling of bridge inspections. (a) Each bridge management program shall include a provision for scheduling an...

49 CFR 237.101 - Scheduling of bridge inspections.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Scheduling of bridge inspections. 237.101 Section... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION BRIDGE SAFETY STANDARDS Bridge Inspection § 237.101 Scheduling of bridge inspections. (a) Each bridge management program shall include a provision for scheduling an...

Thermographic Inspections And The Residential Conservation Service Program (RCS)

NASA Astrophysics Data System (ADS)

Ward, Ronald J.

1983-03-01

Rhode Islanders Saving Energy (RISE) is a non-profit corporation founded in 1977 to provide Rhode Island residents with a variety of energy conservation services. Since January of 1981, it has been performing energy audits in compliance with the Department of Energy's (DOE) Residential Conservation Service Program (RCS). One aspect of the RCS program is the performance of inspections on energy conservation activities completed according to RCS installation guidelines. This paper will describe both the use and results of thermographic inspections within the RISE program. The primary objective of these inspections has been to assure the quality of the building envelope after completion of retrofit measures. Thermal anamolies have been detected that vary in size, location and probable cause. Approximately 37% of all jobs performed through RISE in conjunction with the RCS program have required remedial work as a result of problems that were identi-fied during the thermographic inspection. This percentage was much higher when infra-red inspections were conducted on "Non-RCS" retrofits. Statistics will be presented that provide an interesting insight on the quality of retrofit work when performed in associa-tion with a constant inspection process.

14 CFR 125.247 - Inspection programs and maintenance.

Code of Federal Regulations, 2014 CFR

2014-01-01

... CAPACITY OF 6,000 POUNDS OR MORE; AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Maintenance § 125.247 Inspection programs and maintenance. (a) No person may operate an airplane subject to this part unless (1... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Inspection programs and maintenance. 125...

14 CFR 125.247 - Inspection programs and maintenance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... CAPACITY OF 6,000 POUNDS OR MORE; AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Maintenance § 125.247 Inspection programs and maintenance. (a) No person may operate an airplane subject to this part unless (1... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Inspection programs and maintenance. 125...

14 CFR 125.247 - Inspection programs and maintenance.

Code of Federal Regulations, 2011 CFR

2011-01-01

... CAPACITY OF 6,000 POUNDS OR MORE; AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Maintenance § 125.247 Inspection programs and maintenance. (a) No person may operate an airplane subject to this part unless (1... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Inspection programs and maintenance. 125...

14 CFR 125.247 - Inspection programs and maintenance.

Code of Federal Regulations, 2013 CFR

2013-01-01

... CAPACITY OF 6,000 POUNDS OR MORE; AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Maintenance § 125.247 Inspection programs and maintenance. (a) No person may operate an airplane subject to this part unless (1... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Inspection programs and maintenance. 125...

14 CFR 125.247 - Inspection programs and maintenance.

Code of Federal Regulations, 2012 CFR

2012-01-01

... CAPACITY OF 6,000 POUNDS OR MORE; AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Maintenance § 125.247 Inspection programs and maintenance. (a) No person may operate an airplane subject to this part unless (1... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Inspection programs and maintenance. 125...

ANNUAL RADIOACTIVE WASTE TANK INSPECTION PROGRAM 2010

DOE Office of Scientific and Technical Information (OSTI.GOV)

West, B.; Waltz, R.

Aqueous radioactive wastes from Savannah River Site (SRS) separations and vitrification processes are contained in large underground carbon steel tanks. Inspections made during 2010 to evaluate these vessels and other waste handling facilities along with evaluations based on data from previous inspections are the subject of this report. The 2010 inspection program revealed that the structural integrity and waste confinement capability of the Savannah River Site waste tanks were maintained. All inspections scheduled per SRR-LWE-2009-00138, HLW Tank Farm Inspection Plan for 2010, were completed. Ultrasonic measurements (UT) performed in 2010 met the requirements of C-ESG-00006, In-Service Inspection Program for Highmore » Level Waste Tanks, Rev. 3, and WSRC-TR-2002-00061, Rev.6. UT inspections were performed on Tanks 30, 31 and 32 and the findings are documented in SRNL-STI-2010-00533, Tank Inspection NDE Results for Fiscal Year 2010, Waste Tanks 30, 31 and 32. A total of 5824 photographs were made and 1087 visual and video inspections were performed during 2010. Ten new leaksites at Tank 5 were identified in 2010. The locations of these leaksites are documented in C-ESR-G-00003, SRS High Level Waste Tank Leaksite Information, Rev.5. Ten leaksites at Tank 5 were documented during tank wall/annulus cleaning activities. None of these new leaksites resulted in a release to the environment. The leaksites were documented during wall cleaning activities and the waste nodules associated with the leaksites were washed away. Previously documented leaksites were reactivated at Tank 12 during waste removal activities.« less

An integrated approach for improving occupational health and safety management: the voluntary protection program in Taiwan.

PubMed

Su, Teh-Sheng; Tsai, Way-Yi; Yu, Yi-Chun

2005-05-01

A voluntary compliance program for occupational health and safety management, Voluntary Protection Programs (VPP), was implemented with a strategy of cooperation and encouragement in Taiwan. Due to limitations on increasing the human forces of inspection, a regulatory-based guideline addressing the essence of Occupational Health and Safety Management Systems (OHSMS) was promulgated, which combined the resources of third parties and insurance providers to accredit a self-improving worksite with the benefits of waived general inspection and a merit contributing to insurance premium payment reduction. A designated institute accepts enterprise's applications, performs document review and organizes the onsite inspection. A final review committee of Council of Labor Affairs (CLA) confers a two-year certificate on an approved site. After ten years, the efforts have shown a dramatic reduction of occupational injuries and illness in the total number of 724 worksites granted certification. VPP worksites, in comparison with all industries, had 49% lower frequency rate in the past three years. The severity rate reduction was 80% in the same period. The characteristics of Taiwan VPP program and international occupational safety and health management programs are provided. A Plan-Do-Check-Act management cycle was employed for pursuing continual improvements to the culture fostered. The use of a quantitative measurement for assessing the performance of enterprises' occupational safety and health management showed the efficiency of the rating. The results demonstrate that an employer voluntary protection program is a promising strategy for a developing country.

National Program for Inspection of Non-Federal Dams. Houghton Pond Dam (MA 00444), Charles River Basin, Holliston, Massachusetts. Phase I Inspection Report.

DTIC Science & Technology

1979-07-01

RD-A154 892 NATIONAL PROGRAM FOR INSPECTION OF NON-FEDERAL DAMS i/I HOUGHTON POND DAM (MA..(U) CORPS OF ENGINEERS WALTHAM UNCLASSIFIED N NEN ENGLAND...HOUGHTON POND DAM MA 00444 PHASE I INSPECTION REPORT _ NATIONAL DAM INSPECTION PROGRAM DTIC EECTE CD JUN4 985 -LJE DEPARTMENT OF THE ARMY NEW ENGLAND...16 SUPPLEMENTARY NOTES Co ver program reads: Phase I Inspection Report, National Dam Inspection Program ; however, the official title of the program

ANNUAL RADIOACTIVE WASTE TANK INSPECTION PROGRAM 2009

DOE Office of Scientific and Technical Information (OSTI.GOV)

West, B.; Waltz, R.

2010-06-21

Aqueous radioactive wastes from Savannah River Site (SRS) separations and vitrification processes are contained in large underground carbon steel tanks. Inspections made during 2009 to evaluate these vessels and other waste handling facilities along with evaluations based on data from previous inspections are the subject of this report. The 2009 inspection program revealed that the structural integrity and waste confinement capability of the Savannah River Site waste tanks were maintained. All inspections scheduled per LWO-LWE-2008-00423, HLW Tank Farm Inspection Plan for 2009, were completed. All Ultrasonic measurements (UT) performed in 2009 met the requirements of C-ESG-00006, In-Service Inspection Program formore » High Level Waste Tanks, Rev. 1, and WSRC-TR-2002-00061, Rev.4. UT inspections were performed on Tank 29 and the findings are documented in SRNL-STI-2009-00559, Tank Inspection NDE Results for Fiscal Year 2009, Waste Tank 29. Post chemical cleaning UT measurements were made in Tank 6 and the results are documented in SRNL-STI-2009-00560, Tank Inspection NDE Results Tank 6, Including Summary of Waste Removal Support Activities in Tanks 5 and 6. A total of 6669 photographs were made and 1276 visual and video inspections were performed during 2009. Twenty-Two new leaksites were identified in 2009. The locations of these leaksites are documented in C-ESR-G-00003, SRS High Level Waste Tank Leaksite Information, Rev.4. Fifteen leaksites at Tank 5 were documented during tank wall/annulus cleaning activities. Five leaksites at Tank 6 were documented during tank wall/annulus cleaning activities. Two new leaksites were identified at Tank 19 during waste removal activities. Previously documented leaksites were reactivated at Tanks 5 and 12 during waste removal activities. Also, a very small amount of additional leakage from a previously identified leaksite at Tank 14 was observed.« less

32 CFR 636.33 - Vehicle safety inspection criteria.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 4 2011-07-01 2011-07-01 false Vehicle safety inspection criteria. 636.33 Section 636.33 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) LAW...) Tires—every vehicle will be equipped with serviceable rubber tires which will have a tread depth of at...

32 CFR 636.33 - Vehicle safety inspection criteria.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 4 2010-07-01 2010-07-01 true Vehicle safety inspection criteria. 636.33 Section 636.33 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) LAW...) Tires—every vehicle will be equipped with serviceable rubber tires which will have a tread depth of at...

9 CFR 381.109 - Form of official poultry inspection certificate.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Form of official poultry inspection certificate. 381.109 Section 381.109 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE.... Department of Agriculture Animal and Plant Health Inspection Service Meat and Poultry Inspection Program...

National Dam Safety Program. Lakeview Estates Dam (MO 11004), Mississippi - Kaskaskia - St. Louis Basin, Warren County, Missouri. Phase I Inspection Report.

DTIC Science & Technology

1979-09-01

ificatiozh Distributon/ Availabilit oe LAKEVIEW ESTATES DAM WARREN COUNTY, MISSOURI MISSOURI INVENTORY NO. 11004 PHASE I INSPECTION REPORT NATIONAL DAM SAFETY...and *impounds less than 1,000 acre-feet of water . Our inspection and evaluation indicates that the spill- way of Lakeview Estates Dam does not meet...not be measured because of high reservoir level, scalloping near the crest and a berm just under the water surface. Limestone riprap in sizes from sand

Food Safety in the National School Lunch Program. USDA Food and Nutrition Service

ERIC Educational Resources Information Center

US Department of Agriculture, 2010

2010-01-01

Schools that serve meals under the National School Lunch Program (NSLP) and School Breakfast Program (SBP) are required to maintain proper sanitation and health standards in conformance with all applicable State and local laws and regulations. In addition, schools are required to obtain two school food safety inspections per school year, which are…

Wireless roadside inspection phase II : final report.

DOT National Transportation Integrated Search

2014-03-01

The Federal Motor Carrier Safety Administration (FMCSA) Wireless Roadside Inspection (WRI) Program is demonstrating the feasibility and value of electronically assessing truck and motorcoach driver and vehicle safety at least 25 times more often than...

Application of color mixing for safety and quality inspection of agricultural products

NASA Astrophysics Data System (ADS)

Ding, Fujian; Chen, Yud-Ren; Chao, Kuanglin

2005-11-01

In this paper, color-mixing applications for food safety and quality was studied, including two-color mixing and three-color mixing. It was shown that the chromaticness of the visual signal resulting from two- or three-color mixing is directly related to the band ratio of light intensity at the two or three selected wavebands. An optical visual device using color mixing to implement the band ratio criterion was presented. Inspection through human vision assisted by an optical device that implements the band ratio criterion would offer flexibility and significant cost savings as compared to inspection with a multispectral machine vision system that implements the same criterion. Example applications of this optical color mixing technique were given for the inspection of chicken carcasses with various diseases and for the detection of chilling injury in cucumbers. Simulation results showed that discrimination by chromaticness that has a direct relation with band ratio can work very well with proper selection of the two or three narrow wavebands. This novel color mixing technique for visual inspection can be implemented on visual devices for a variety of applications, ranging from target detection to food safety inspection.

Computerized fracture critical and specialized bridge inspection program with NDE applications

NASA Astrophysics Data System (ADS)

Fish, Philip E.

1998-03-01

Wisconsin Department of Transportation implemented a Fracture Critical & Specialized Inspection Program in 1987. The program has a strong emphasis on Nondestructive Testing (NDT). The program is also completely computerized, using laptop computers to gather field data, digital cameras for pictures, and testing equipment with download features. Final inspection reports with detailed information can be delivered within days of the inspection. The program requires an experienced inspection team and qualified personnel. Individuals performing testing must be licensed ASNT (American Society for Nondestructive Testing) Level III and must be licensed Certified Weld Inspectors (American Welding Society). Several critical steps have been developed to assure that each inspection identifies all possible deficiencies that may be possible on a Fracture Critical or Unique Bridge. They include; review of all existing plans and maintenance history; identification of fracture critical members, identification of critical connection details, welds, & fatigue prone details, development of visual and NDE inspection plan; field inspection procedures; and a detailed formal report. The program has found several bridges with critical fatigue conditions which have resulted in replacement or major rehabilitation. In addition, remote monitoring systems have been installed on structures with serious cracking to monitor for changing conditions.

National Program for Inspection of Non-Federal Dams. Merino Pond Dam (MA 00110), Thames River Basin, Dudley, Massachusetts. Phase I Inspection Report.

DTIC Science & Technology

1979-09-01

of slm~ lu THAMES RIVER BASIN 00 DUDLEY, MASSACHUSETTS 0 0 in MERINO POND DAM MA 00110 0 PHASE I INSPECTION REPORT 0 NATIONAL DAM INSPECTION PROGRAM ...NATIONAL PROGRAM FOR INSPECTION OF NON-FEDERAL , e, .* f. ,,,-Ue I,. h TNw@ e 6, CONTACT OR IAUNT ONUWSaEPe* U.S. AMY CORPS OF ENGINEERS NEW ENGLAND...SAaUmN el ame 6 am vel NSON* Odlmwmn ba 00-0 o6. oll.I,,NIA*v mOTE& Cover program reads: Phase I Inspection Report, National Dam Inspection Program

National Program for Inspection of Non-Federal Dams. Monsanto Company Upper Dam (MA 00573), Connecticut River Basin, Springfield, Massachusetts. Phase I Inspection Report.

DTIC Science & Technology

1978-10-01

DAM . * MA 00573 PHASE 1 INSPECTION REPORT NATIONAL DAM INSPECTION PROGRAM 0 V DEPARTMENT OF THE ARMY_ NEW ENGLAND DIVISION, CORPS OF ENGINEERS WALTHAM...ArIhtEN T (c- the 6b4trectenrto I lck 20, It dit.,.et i am Report) !6 5IPPLEMENTARY NOTES (,o ,er program reads: Phase I Inspection Report, National Darn...Inspection Program ; hov.ever, the official title of the program is: National Program for Inspection of lon-Federal Dans:. LISP cover date for date of

Effect of a Publicly Accessible Disclosure System on Food Safety Inspection Scores in Retail and Food Service Establishments.

PubMed

Choi, Jihee; Scharff, Robert L

2017-07-01

The increased frequency with which people are dining out coupled with an increase in the publicity of foodborne disease outbreaks has led the public to an increased awareness of food safety issues associated with food service establishments. To accommodate consumer needs, local health departments have increasingly publicized food establishments' health inspection scores. The objective of this study was to estimate the effect of the color-coded inspection score disclosure system in place since 2006 in Columbus, OH, by controlling for several confounding factors. This study incorporated cross-sectional time series data from food safety inspections performed from the Columbus Public Health Department. An ordinary least squares regression was used to assess the effect of the new inspection regime. The introduction of the new color-coded food safety inspection disclosure system increased inspection scores for all types of establishments and for most types of inspections, although significant differences were found in the degree of improvement. Overall, scores increased significantly by 1.14 points (of 100 possible). An exception to the positive results was found for inspections in response to foodborne disease complaints. Scores for these inspections declined significantly by 10.2 points. These results should be useful for both food safety researchers and public health decision makers.

Housatonic River Basin, Danbury, Connecticut. Lower Kohanza Dam (CT 00064). National Dam Inspection Program. Phase I Inspection Report.

DTIC Science & Technology

1981-05-01

CONNECTICUT PHASE I INSPECTION REPORT’ I NATIONAL DAM INSPECTION PRGRAM 1 NATIONAL DAM INSPECTION PROGRAM PHASE I INSPECTION REPORT Identification No...of the toe of the aam and backtill the resulting voids with a suitable compacted material. Grass shoula be planted over the repairea areas to prevent

National Program of Inspection of Non-Federal Dams.

DTIC Science & Technology

1982-05-01

actions to improve the .;,.fety of Federal dams . 3 B. PROGRAM REVITALIZATION Subsequent to the failure of the Teton Dam , near Newdale, Idaho, in June...development of hydrostatic heads sufficient to create in the area downstream of the dam sand boils that erode materials by the phenomenon known as " piping " and...Eh irmmhhhommlm mhhhhmmmmhhlo US Arm op National Program of Inspection of Non-Federal Dams Final Report to Congress The National Dam Inspection Act of

9 CFR 327.6 - Products for importation; program inspection, time and place; application for approval of...

Code of Federal Regulations, 2010 CFR

2010-01-01

... Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY... into the United States. (2) Every lot of product shall routinely be given visual inspection by a... Food Safety and Inspection Service. The listing will categorize the kind or kinds of product 2 which...

Wireless roadside inspection phase II evaluation final report.

DOT National Transportation Integrated Search

2011-06-01

The Federal Motor Carrier Safety Administration (FMCSA) Wireless Roadside Inspection (WRI) Program is demonstrating the feasibility and value of electronically assessing truck and coach driver and vehicle safety at least 25 times more often than is p...

Wireless roadside inspection phase II : final report : [technology brief].

DOT National Transportation Integrated Search

2014-04-01

The Federal Motor Carrier Safety Administration (FMCSA) Wireless Roadside Inspection (WRI) Program is demonstrating the feasibility and value of electronically assessing truck and motorcoach driver and vehicle safety. Electronic assessments (or WRIs)...

Evaluation of overhead support inspection program.

DOT National Transportation Integrated Search

2015-01-01

This study evaluated the adequacy and frequency of the current structural support inspection program for overhead : sign supports (including bridge mounted), mast arm signal supports and high mast light supports. While ODOT provides : statewide guida...

An overview of microbial food safety programs in beef, pork, and poultry from farm to processing in Canada.

PubMed

Rajić, Andrijana; Waddell, Lisa A; Sargeant, Jan M; Read, Susan; Farber, Jeff; Firth, Martin J; Chambers, Albert

2007-05-01

Canada's vision for the agri-food industry in the 21st century is the establishment of a national food safety system employing hazard analysis and critical control point (HACCP) principles and microbiological verification tools, with traceability throughout the gate-to-plate continuum. Voluntary on-farm food safety (OFFS) programs, based in part on HACCP principles, provide producers with guidelines for good production practices focused on general hygiene and biosecurity. OFFS programs in beef cattle, swine, and poultry are currently being evaluated through a national recognition program of the Canadian Food Inspection Agency. Mandatory HACCP programs in federal meat facilities include microbial testing for generic Escherichia coli to verify effectiveness of the processor's dressing procedure, specific testing of ground meat for E. coli O157:H7, with zero tolerance for this organism in the tested lot, and Salmonella testing of raw products. Health Canada's policy on Listeria monocytogenes divides ready-to-eat products into three risk categories, with products previously implicated as the source of an outbreak receiving the highest priority for inspection and compliance. A national mandatory identification program to track livestock from the herd of origin to carcass inspection has been established. Can-Trace, a data standard for all food commodities, has been designed to facilitate tracking foods from the point of origin to the consumer. Although much work has already been done, a coherent national food safety strategy and concerted efforts by all stakeholders are needed to realize this vision. Cooperation of many government agencies with shared responsibility for food safety and public health will be essential.

Implementation of the Air Program Information Management System (APIMS) Inspection Module

DTIC Science & Technology

2009-05-01

7 5 T H A I R B A S E W I N G Implementation of the Air Program Information Management System (APIMS) Inspection Module 2009 Environment...Implementation of the Air Program Information Management System (APIMS) Inspection Module 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER

Final Report Inspection of Aged/Degraded Containments Program.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Naus, Dan J; Ellingwood, B R; Oland, C Barry

2005-09-01

The Inspection of Aged/Degraded Containments Program had primary objectives of (1) understanding the significant factors relating corrosion occurrence, efficacy of inspection, and structural capacity reduction of steel containments and liners of reinforced concrete containments; (2) providing the United States Nuclear Regulatory Commission (USNRC) reviewers a means of establishing current structural capacity margins or estimating future residual structural capacity margins for steel containments, and concrete containments as limited by liner integrity; (3) providing recommendations, as appropriate, on information to be requested of licensees for guidance that could be utilized by USNRC reviewers in assessing the seriousness of reported incidences of containmentmore » degradation; and (4) providing technical assistance to the USNRC (as requested) related to concrete technology. Primary program accomplishments have included development of a degradation assessment methodology; reviews of techniques and methods for inspection and repair of containment metallic pressure boundaries; evaluation of high-frequency acoustic imaging, magnetostrictive sensor, electromagnetic acoustic transducer, and multimode guided plate wave technologies for inspection of inaccessible regions of containment metallic pressure boundaries; development of a continuum damage mechanics-based approach for structural deterioration; establishment of a methodology for reliability-based condition assessments of steel containments and liners; and fragility assessments of steel containments with localized corrosion. In addition, data and information assembled under this program has been transferred to the technical community through review meetings and briefings, national and international conference participation, technical committee involvement, and publications of reports and journal articles. Appendix A provides a listing of program reports, papers, and publications; and Appendix B contains a

South Carolina Industrial Arts Safety Guide. Student Section.

ERIC Educational Resources Information Center

South Carolina State Dept. of Education, Columbia.

This student section of a South Carolina industrial arts safety guide includes guidelines for developing a student safety program and three sections of shop safety practices. Safety program format, safety committees, safety inspection, and student accident investigation are discussed in the section on developing a student safety program. Set forth…

33 CFR 3.35-15 - Sector Charleston Marine Inspection Zone and Captain of the Port Zone; Marine Safety Unit Savannah.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Inspection Zone and Captain of the Port Zone; Marine Safety Unit Savannah. 3.35-15 Section 3.35-15 Navigation..., SECTORS, MARINE INSPECTION ZONES, AND CAPTAIN OF THE PORT ZONES Seventh Coast Guard District § 3.35-15 Sector Charleston Marine Inspection Zone and Captain of the Port Zone; Marine Safety Unit Savannah...

33 CFR 3.35-15 - Sector Charleston Marine Inspection Zone and Captain of the Port Zone; Marine Safety Unit Savannah.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Inspection Zone and Captain of the Port Zone; Marine Safety Unit Savannah. 3.35-15 Section 3.35-15 Navigation..., SECTORS, MARINE INSPECTION ZONES, AND CAPTAIN OF THE PORT ZONES Seventh Coast Guard District § 3.35-15 Sector Charleston Marine Inspection Zone and Captain of the Port Zone; Marine Safety Unit Savannah...

33 CFR 3.35-15 - Sector Charleston Marine Inspection Zone and Captain of the Port Zone; Marine Safety Unit Savannah.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Inspection Zone and Captain of the Port Zone; Marine Safety Unit Savannah. 3.35-15 Section 3.35-15 Navigation..., SECTORS, MARINE INSPECTION ZONES, AND CAPTAIN OF THE PORT ZONES Seventh Coast Guard District § 3.35-15 Sector Charleston Marine Inspection Zone and Captain of the Port Zone; Marine Safety Unit Savannah...

33 CFR 3.35-15 - Sector Charleston Marine Inspection Zone and Captain of the Port Zone; Marine Safety Unit Savannah.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Inspection Zone and Captain of the Port Zone; Marine Safety Unit Savannah. 3.35-15 Section 3.35-15 Navigation..., SECTORS, MARINE INSPECTION ZONES, AND CAPTAIN OF THE PORT ZONES Seventh Coast Guard District § 3.35-15 Sector Charleston Marine Inspection Zone and Captain of the Port Zone; Marine Safety Unit Savannah...

33 CFR 3.35-15 - Sector Charleston Marine Inspection Zone and Captain of the Port Zone; Marine Safety Unit Savannah.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Inspection Zone and Captain of the Port Zone; Marine Safety Unit Savannah. 3.35-15 Section 3.35-15 Navigation..., SECTORS, MARINE INSPECTION ZONES, AND CAPTAIN OF THE PORT ZONES Seventh Coast Guard District § 3.35-15 Sector Charleston Marine Inspection Zone and Captain of the Port Zone; Marine Safety Unit Savannah...

Health and safety executive inspection of U.K. semiconductor manufacturers.

PubMed

Watterson, Andrew; LaDou, Joseph

2003-01-01

Europe plays a major role in the international semiconductor industry, but has conducted few studies of the occupational health of its workers. An exception is in the United Kingdom, where, in two small studies, the Health and Safety Executive (HSE) evaluated some health effects of semiconductor work. Neither of these studies, largely restricted to Scotland, produced definitive results, and both were misused by industry to assert that they demonstrated no adverse health effect on workers. The results of the studies prompted semiconductor industry inspections recently completed by the HSE that included chip manufacturers in Scotland and other U.K. areas. The results of these inspections are disappointing.

9 CFR 303.2 - Experimentation: Intensity of inspection coverage.

Code of Federal Regulations, 2014 CFR

2014-01-01

... inspection coverage. 303.2 Section 303.2 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE... under the Act and regulations is required, the frequency with which and the manner in which meat food... by Program employees is to be based on considerations relevant to effective regulation of meat food...

A job safety program for construction workers designed to reduce the potential for occupational injury using tool box training sessions and computer-assisted biofeedback stress management techniques.

PubMed

Johnson, Kenneth A; Ruppe, Joan

2002-01-01

This project was conducted with a multicultural construction company in Hawaii, USA. The job duties performed included drywall and carpentry work. The following objectives were selected for this project: (a) fire prevention training and inspection of first aid equipment; (b) blood-borne pathogen training and risk evaluation; (c) ergonomic and risk evaluation intervention program; (d) electrical safety training and inspection program; (e) slips, trips, and falls safety training; (f) stress assessment and Personal Profile System; (g) safety and health program survey; (h) improving employee relations and morale by emphasizing spirituality; and (i) computer-assisted biofeedback stress management training. Results of the project indicated that observed safety hazards, reported injuries, and levels of perceived stress. were reduced for the majority of the population.

Industrial Arts Safety Guide. Thai. Bilingual Education Resource Series.

ERIC Educational Resources Information Center

Seattle School District 1, WA.

Designed for use in bilingual education programs, this industrial arts safety guide presents guidelines for developing a student safety program and three sections of shop safety practices in both English and Thai. Safety program format, safety committees, safety inspection, and student accident investigation are discussed in the section on…

Industrial Arts Safety Guide. Japanese. Bilingual Education Resource Series.

ERIC Educational Resources Information Center

Seattle School District 1, WA.

Designed for use in bilingual education programs, this industrial arts safety guide presents guidelines for developing a student safety program and three sections of shop safety practice in both English and Japanese. Safety program format, safety committees, safety inspection, and student accident investigation are discussed in the section on…

Industrial Arts Safety Guide. Cambodian. Bilingual Education Resource Series.

ERIC Educational Resources Information Center

Seattle School District 1, WA.

Designed for use in bilingual education programs, this industrial arts safety guide includes guidelines for developing a student safety program and three sections of shop safety practices in both English and Cambodian. Safety program format, safety committees, safety inspection, and student accident investigation are discussed in the section on…

Industrial Arts Safety Guide. Korean. Bilingual Education Resource Series.

ERIC Educational Resources Information Center

Seattle School District 1, WA.

Designed for use in bilingual education programs, this industrial arts safety guide presents guidelines for developing a student safety program and three sections of shop safety practices in both English and Korean. Safety program format, safety committees, safety inspection, and student accident investigation are discussed in the section on…

Industrial Arts Safety Guide. Ilokano. Bilingual Education Resource Series.

ERIC Educational Resources Information Center

Seattle School District 1, WA.

Designed for use in bilingual education programs, this industrial arts safety guide presents guidelines for developing a student safety program and three sections of shop safety practices in both English and Ilokano. Safety program format, safety committees, safety inspection, and student accident investigation are discussed in the section on…

Industrial Arts Safety Guide. Chinese. Bilingual Education Resource Series.

ERIC Educational Resources Information Center

Seattle School District 1, WA.

Designed for use in bilingual education programs, this industrial arts safety guide presents guidelines for developing a student safety program and three sections of shop safety practices in both English and Chinese. Safety program format, safety committees, safety inspection, and student accident investigation are discussed in the section on…

Maryland motor carrier program performance enhancement : [research summary].

DOT National Transportation Integrated Search

2014-02-01

The Maryland Motor Carrier Program (MMCP) involves the regulation of : commercial vehicle safety inspections. This includes roadside inspections : programs which have a goal of improving safety and reducing crashes : involving commercial vehicles. Th...

46 CFR 153.1504 - Inspection of personnel emergency and safety equipment.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 5 2012-10-01 2012-10-01 false Inspection of personnel emergency and safety equipment. 153.1504 Section 153.1504 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS...

46 CFR 153.1504 - Inspection of personnel emergency and safety equipment.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 5 2011-10-01 2011-10-01 false Inspection of personnel emergency and safety equipment. 153.1504 Section 153.1504 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS...

46 CFR 153.1504 - Inspection of personnel emergency and safety equipment.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 5 2013-10-01 2013-10-01 false Inspection of personnel emergency and safety equipment. 153.1504 Section 153.1504 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS...

46 CFR 153.1504 - Inspection of personnel emergency and safety equipment.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 5 2014-10-01 2014-10-01 false Inspection of personnel emergency and safety equipment. 153.1504 Section 153.1504 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS...

Level of Service Program for INDOT Operations : APPENDIX C Los Inspection Manual

DOT National Transportation Integrated Search

2012-01-01

INDOT has used an inspection program named Maintenance Quality Survey (MQS) to perform a statewide inspection of their roadway assets, rightofway to rightofway. This inspection requires two twoperson teams approximately 18 months to...

Surface and subsurface inspection of food safety and quality using a line-scan Raman system

USDA-ARS?s Scientific Manuscript database

This paper presents a line-scan Raman platform for food safety and quality research, which can be configured for Raman chemical imaging (RCI) mode for surface inspection and spatially offset Raman spectroscopy (SORS) mode for subsurface inspection. In the RCI mode, macro-scale imaging was achieved u...

Food safety and inspection service regulatory testing program for Escherichia coli O157:H7 in raw ground beef.

PubMed

Naugle, Alecia Larew; Holt, Kristin G; Levine, Priscilla; Eckel, Ron

2005-03-01

We analyzed raw ground beef testing data to determine whether a decrease in the rate of Escherichia coli O157:H7-positive raw ground beef samples has occurred since the inception of Food Safety and Inspection Service (U.S. Department of Agriculture) regulatory actions and microbiological testing concerning this commodity and pathogen. A main effects log-linear Poisson regression model was constructed to evaluate the association between fiscal year and the rate of E. coli O157:H7-positive raw ground beef samples while controlling for the effect of season for the subset of test results obtained from fiscal year (FY)2000 through FY2003. Rate ratios were used to compare the rate of E. coli O157:H7-positive raw ground beef samples between sequential years to identify year-to-year differences. Of the 26,521 raw ground beef samples tested from FY2000 through FY2003, 189 (0.71%) tested positive for E. coli O157:H7. Year-to-year comparisons identified a 50% reduction in the rate of positive ground beef samples from FY2002 to FY2003 when controlling for season (95% CI, 10 to 72% decrease; P = 0.02). This decrease was the only significant year-to-year change in the rate of E. coli O157:H7-positive raw ground beef samples but was consistent in samples obtained from both federally inspected establishments and retail outlets. We believe this decrease is attributed to specific regulatory actions by Food Safety and Inspection Service and subsequent actions implemented by the industry, with the goal of reducing E. coli O157:H7 adulteration of raw ground beef. Continued monitoring is necessary to confirm that the decrease in the rate of E. coli O157:H7 in raw ground beef samples we observed here represents the beginning of a sustained trend.

Safety and the Human Factor.

ERIC Educational Resources Information Center

Smith, Ann

1982-01-01

Discusses four elements of safety programs: (1) safety training; (2) safety inspections; (3) accident investigations; and (4) protective safety equipment. Also discusses safety considerations in water/wastewater treatment facilities focusing on falls, drowning hazards, trickling filters, confined space entry, collection/distribution system safety,…

MSFC inspections of installed polyimide wire

NASA Technical Reports Server (NTRS)

Landers, Joe C.

1994-01-01

An alert was issued because of the arc-tracking possibilities of installed polyimide wire harnesses. MSFC undertook a program to try to enhance the safety and reliability of these harnesses. Photographs are presented showing the need for inspections of installed wiring harnesses.

33 CFR 3.45-45 - Sector Sault Ste. Marie Marine Inspection Zone and Captain of the Port Zone; Marine Safety Unit...

Code of Federal Regulations, 2011 CFR

2011-07-01

... Inspection Zone and Captain of the Port Zone; Marine Safety Unit Duluth. 3.45-45 Section 3.45-45 Navigation..., SECTORS, MARINE INSPECTION ZONES, AND CAPTAIN OF THE PORT ZONES Ninth Coast Guard District § 3.45-45 Sector Sault Ste. Marie Marine Inspection Zone and Captain of the Port Zone; Marine Safety Unit Duluth...

33 CFR 3.45-45 - Sector Sault Ste. Marie Marine Inspection Zone and Captain of the Port Zone; Marine Safety Unit...

Code of Federal Regulations, 2012 CFR

2012-07-01

... Inspection Zone and Captain of the Port Zone; Marine Safety Unit Duluth. 3.45-45 Section 3.45-45 Navigation..., SECTORS, MARINE INSPECTION ZONES, AND CAPTAIN OF THE PORT ZONES Ninth Coast Guard District § 3.45-45 Sector Sault Ste. Marie Marine Inspection Zone and Captain of the Port Zone; Marine Safety Unit Duluth...

33 CFR 3.45-45 - Sector Sault Ste. Marie Marine Inspection Zone and Captain of the Port Zone; Marine Safety Unit...

Code of Federal Regulations, 2014 CFR

2014-07-01

... Inspection Zone and Captain of the Port Zone; Marine Safety Unit Duluth. 3.45-45 Section 3.45-45 Navigation..., SECTORS, MARINE INSPECTION ZONES, AND CAPTAIN OF THE PORT ZONES Ninth Coast Guard District § 3.45-45 Sector Sault Ste. Marie Marine Inspection Zone and Captain of the Port Zone; Marine Safety Unit Duluth...

33 CFR 3.45-45 - Sector Sault Ste. Marie Marine Inspection Zone and Captain of the Port Zone; Marine Safety Unit...

Code of Federal Regulations, 2010 CFR

2010-07-01

... Inspection Zone and Captain of the Port Zone; Marine Safety Unit Duluth. 3.45-45 Section 3.45-45 Navigation..., SECTORS, MARINE INSPECTION ZONES, AND CAPTAIN OF THE PORT ZONES Ninth Coast Guard District § 3.45-45 Sector Sault Ste. Marie Marine Inspection Zone and Captain of the Port Zone; Marine Safety Unit Duluth...

33 CFR 3.45-45 - Sector Sault Ste. Marie Marine Inspection Zone and Captain of the Port Zone; Marine Safety Unit...

Code of Federal Regulations, 2013 CFR

2013-07-01

... Inspection Zone and Captain of the Port Zone; Marine Safety Unit Duluth. 3.45-45 Section 3.45-45 Navigation..., SECTORS, MARINE INSPECTION ZONES, AND CAPTAIN OF THE PORT ZONES Ninth Coast Guard District § 3.45-45 Sector Sault Ste. Marie Marine Inspection Zone and Captain of the Port Zone; Marine Safety Unit Duluth...

40 CFR 52.786 - Inspection and maintenance program.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., commitment to timely adopt and implement enhanced inspection and maintenance (I/M) rules for Lake and Porter... parts of the program to certify compliance. (e) After July 1, 1976, the State of Indiana, County of... pertaining to the development and adoption of necessary authority for the I/M program. This disapproval...

40 CFR 52.786 - Inspection and maintenance program.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., commitment to timely adopt and implement enhanced inspection and maintenance (I/M) rules for Lake and Porter... parts of the program to certify compliance. (e) After July 1, 1976, the State of Indiana, County of... pertaining to the development and adoption of necessary authority for the I/M program. This disapproval...

Inspection Frequency, Sociodemographic Factors, and Food Safety Violations in Chain and Nonchain Restaurants, Philadelphia, Pennsylvania, 2013-2014.

PubMed

Leinwand, Sarah E; Glanz, Karen; Keenan, Brendan T; Branas, Charles C

We explored how restaurant inspection frequency and restaurant neighborhood sociodemographic characteristics are related to food safety inspection outcomes in chain and nonchain restaurants to better understand external factors that may influence inspection outcomes. We categorized the results of restaurant inspections in Philadelphia, Pennsylvania, in 2013 and 2014 by restaurant type (chain or nonchain), inspection frequency (1, 2, or ≥3 per 2-year study period), and violation type (total number of violations, foodborne-illness risk factor violation, or good retail practice violation). We collected 2013 US Census block group sociodemographic data for each restaurant neighborhood. We used nested mixed-effects regression analyses to determine the association between restaurant inspection frequency and inspection violations, as well as between inspection violations and restaurant neighborhood sociodemographic variables, stratified by restaurant type. Compared with nonchain restaurants, chain restaurants had significantly fewer total violations per inspection (mean [SD]: 6.5 [4.6] vs 9.6 [6.8] violations, P < .001). For nonchain restaurants, an increase from 1 to 2 inspections resulted in 0.8 ( P < .001) fewer mean violations per inspection, and an increase from 1 to ≥3 inspections resulted in 1.6 ( P < .001) fewer mean violations; this association was not seen in chain restaurants. For nonchain restaurants, a higher proportion of black residents in a restaurant neighborhood was associated with 0.6 ( P < .001) fewer mean foodborne-illness risk factor violations but 1.0 ( P < .001) more mean good retail practice violations per inspection. A risk-based stratified approach to restaurant food safety inspection frequency, based on whether or not restaurants are part of chains, could reduce the frequency of violations, particularly in restaurants with the most violations.

33 CFR 165.169 - Safety and Security Zones: New York Marine Inspection Zone and Captain of the Port Zone.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Safety and Security Zones: New York Marine Inspection Zone and Captain of the Port Zone. 165.169 Section 165.169 Navigation and... Areas First Coast Guard District § 165.169 Safety and Security Zones: New York Marine Inspection Zone...

33 CFR 165.169 - Safety and Security Zones: New York Marine Inspection Zone and Captain of the Port Zone.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Safety and Security Zones: New York Marine Inspection Zone and Captain of the Port Zone. 165.169 Section 165.169 Navigation and... Areas First Coast Guard District § 165.169 Safety and Security Zones: New York Marine Inspection Zone...

33 CFR 165.169 - Safety and Security Zones: New York Marine Inspection Zone and Captain of the Port Zone.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Safety and Security Zones: New York Marine Inspection Zone and Captain of the Port Zone. 165.169 Section 165.169 Navigation and... Areas First Coast Guard District § 165.169 Safety and Security Zones: New York Marine Inspection Zone...

33 CFR 165.169 - Safety and Security Zones: New York Marine Inspection Zone and Captain of the Port Zone.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Safety and Security Zones: New York Marine Inspection Zone and Captain of the Port Zone. 165.169 Section 165.169 Navigation and... Areas First Coast Guard District § 165.169 Safety and Security Zones: New York Marine Inspection Zone...

33 CFR 165.169 - Safety and Security Zones: New York Marine Inspection Zone and Captain of the Port Zone.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Safety and Security Zones: New York Marine Inspection Zone and Captain of the Port Zone. 165.169 Section 165.169 Navigation and... Areas First Coast Guard District § 165.169 Safety and Security Zones: New York Marine Inspection Zone...

National Dam Inspection Program. Lewis Lake Dam (NDI-ID Number PA-00061, DER-ID Number 58-7), Susquehanna River Basin, Susquehanna County, Pennsylvania. Phase I Inspection Report,

DTIC Science & Technology

1980-08-01

AD-A091 595 BERGER ASSOCIATES INC HARRISBURG PA FIG 13/13 NATIONAL DAM INSPECTION PROGRAM . LEWIS LAKE DAM (NDI-ID NUMBER -- ETC(U) AUG GO H JONGSMA...NO. 58-7 SUSQUEHANNA COUNTY, PENNSYLVANIA PHASE I INSPECTION REPORT NATIONAL DAM INSPECTION PROGRAM I 1 k-o C - PREPARED FOR DEPARTMENT OF THE ARMY...Dam Inspection Act, Public Law 92-367, authorized the Secretary of the Army, through the Corps of Engineers, to initiate a program of inspections of

National Dam Safety Program. Upper Apple Mountain & Lower Apple Mountain. Dam (Inventory Number VA 18711 and VA 18709), Potomac River Basin, Warren County, Virginia. Phase I Inspection Report.

DTIC Science & Technology

1981-03-01

pt 3349 tIto . %. 0- Z 20a Z US It - r.422 j - oil too I - i n IN IU w-nj 1.t 1-1 1 1 Uzi bp- r* 93 I .- -CL US0 (1syOWSW!)C 91 00A o Z z 49 W, x _jW4~0...UNCLASSIFIED .’mollIIEIEEIIII l//lEEBhE/h//E IIIEEIIIlIIIII I hhhhhhhhhhhhl POTOAC RIVER BASIN Name Of Dam: UPPER APPLE MTN. 6 LOWER ALE Mt. Location...WARREN COUNTY Inventory Number: VA. 48711 S VA. 16709 PHASE I INSPECTION REPORT NATIONAL DAM SAFETY PROGRAM + I + - SEP3 tell. "=: ~~t PUMP, -We"* li

A Silent Safety Program

NASA Technical Reports Server (NTRS)

Goodin, James Ronald

2006-01-01

NASA's Columbia Accident Investigation Board (CAIB) referred 8 times to the NASA "Silent Safety Program." This term, "Silent Safety Program" was not an original observation but first appeared in the Rogers Commission's Investigation of the Challenger Mishap. The CAIB on page 183 of its report in the paragraph titled 'Encouraging Minority Opinion,' stated "The Naval Reactor Program encourages minority opinions and "bad news." Leaders continually emphasize that when no minority opinions are present, the responsibility for a thorough and critical examination falls to management. . . Board interviews revealed that it is difficult for minority and dissenting opinions to percolate up through the agency's hierarchy. . ." The first question and perhaps the only question is - what is a silent safety program? Well, a silent safety program may be the same as the dog that didn't bark in Sherlock Holmes' "Adventure of the Silver Blaze" because system safety should behave as a devil's advocate for the program barking on every occasion to insure a critical review inclusion. This paper evaluates the NASA safety program and provides suggestions to prevent the recurrence of the silent safety program alluded to in the Challenger Mishap Investigation. Specifically targeted in the CAM report, "The checks and balances the safety system was meant to provide were not working." A silent system safety program is not unique to NASA but could emerge in any and every organization. Principles developed by Irving Janis in his book, Groupthink, listed criteria used to evaluate an organization's cultural attributes that allows a silent safety program to evolve. If evidence validates Jams's criteria, then Jams's recommendations for preventing groupthink can also be used to improve a critical evaluation and thus prevent the development of a silent safety program.

Inspection Frequency, Sociodemographic Factors, and Food Safety Violations in Chain and Nonchain Restaurants, Philadelphia, Pennsylvania, 2013-2014

PubMed Central

Glanz, Karen; Keenan, Brendan T.; Branas, Charles C.

2017-01-01

Objectives: We explored how restaurant inspection frequency and restaurant neighborhood sociodemographic characteristics are related to food safety inspection outcomes in chain and nonchain restaurants to better understand external factors that may influence inspection outcomes. Methods: We categorized the results of restaurant inspections in Philadelphia, Pennsylvania, in 2013 and 2014 by restaurant type (chain or nonchain), inspection frequency (1, 2, or ≥3 per 2-year study period), and violation type (total number of violations, foodborne-illness risk factor violation, or good retail practice violation). We collected 2013 US Census block group sociodemographic data for each restaurant neighborhood. We used nested mixed-effects regression analyses to determine the association between restaurant inspection frequency and inspection violations, as well as between inspection violations and restaurant neighborhood sociodemographic variables, stratified by restaurant type. Results: Compared with nonchain restaurants, chain restaurants had significantly fewer total violations per inspection (mean [SD]: 6.5 [4.6] vs 9.6 [6.8] violations, P < .001). For nonchain restaurants, an increase from 1 to 2 inspections resulted in 0.8 (P < .001) fewer mean violations per inspection, and an increase from 1 to ≥3 inspections resulted in 1.6 (P < .001) fewer mean violations; this association was not seen in chain restaurants. For nonchain restaurants, a higher proportion of black residents in a restaurant neighborhood was associated with 0.6 (P < .001) fewer mean foodborne-illness risk factor violations but 1.0 (P < .001) more mean good retail practice violations per inspection. Conclusions: A risk-based stratified approach to restaurant food safety inspection frequency, based on whether or not restaurants are part of chains, could reduce the frequency of violations, particularly in restaurants with the most violations. PMID:28060568

Development of fluorescence based handheld imaging devices for food safety inspection

NASA Astrophysics Data System (ADS)

Lee, Hoyoung; Kim, Moon S.; Chao, Kuanglin; Lefcourt, Alan M.; Chan, Diane E.

2013-05-01

For sanitation inspection in food processing environment, fluorescence imaging can be a very useful method because many organic materials reveal unique fluorescence emissions when excited by UV or violet radiation. Although some fluorescence-based automated inspection instrumentation has been developed for food products, there remains a need for devices that can assist on-site inspectors performing visual sanitation inspection of the surfaces of food processing/handling equipment. This paper reports the development of an inexpensive handheld imaging device designed to visualize fluorescence emissions and intended to help detect the presence of fecal contaminants, organic residues, and bacterial biofilms at multispectral fluorescence emission bands. The device consists of a miniature camera, multispectral (interference) filters, and high power LED illumination. With WiFi communication, live inspection images from the device can be displayed on smartphone or tablet devices. This imaging device could be a useful tool for assessing the effectiveness of sanitation procedures and for helping processors to minimize food safety risks or determine potential problem areas. This paper presents the design and development including evaluation and optimization of the hardware components of the imaging devices.

An evaluation of costs and benefits of a vehicle periodic inspection scheme with six-monthly inspections compared to annual inspections.

PubMed

Keall, Michael D; Newstead, Stuart

2013-09-01

Although previous research suggests that safety benefits accrue from periodic vehicle inspection programmes, little consideration has been given to whether the benefits are sufficient to justify the often considerable costs of such schemes. Methodological barriers impede many attempts to evaluate the overall safety benefits of periodic vehicle inspection schemes, including this study, which did not attempt to evaluate the New Zealand warrant of fitness scheme as a whole. Instead, this study evaluated one aspect of the scheme: the effects of doubling the inspection frequency, from annual to biannual, when the vehicle reaches six years of age. In particular, reductions in safety-related vehicle faults were estimated together with the value of the safety benefits compared to the costs. When merged crash data, licensing data and roadworthiness inspection data were analysed, there were estimated to be improvements in injury crash involvement rates and prevalence of safety-related faults of respectively 8% (95% CI 0.4-15%) and 13.5% (95% CI 12.8-14.2%) associated with the increase from annual to 6-monthly inspections. The wide confidence interval for the drop in crash rate shows considerably statistical uncertainty about the precise size of the drop. Even assuming that this proportion of vehicle faults prevented by doubling the inspection frequency could be maintained over the vehicle age range 7-20 years, the safety benefits are very unlikely to exceed the additional costs of the 6-monthly inspections to the motorists, valued at $NZ 500 million annually excluding the overall costs of administering the scheme. The New Zealand warrant of fitness scheme as a whole cannot be robustly evaluated using the analysis approach used here, but the safety benefits would need to be substantial--yielding an unlikely 12% reduction in injury crashes--for benefits to equal costs. Copyright © 2013 Elsevier Ltd. All rights reserved.

Evaluation of the US Department of Energy's occupational safety and health program for its government-owned contractor-operated facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The purpose of this report is to present to Secretary of Energy James Watkins the findings and recommendations of the Occupational Safety and Health Administration's (OSHA) evaluation of the Department of Energy's (DOE) programs for worker safety and health at DOE's government-owned contractor-operated (GOCO) nuclear facilities. The OSHA evaluation is based on an intensive and comprehensive review and analysis of DOE's worker safety and health programs including: written programs; safety and health inspection programs; and the adequacy of resource, training, and management controls. The evaluation began on April 10, 1990 and involved over three staff years before its conclusion. Themore » evaluation was initiated by former Secretary of Labor Elizabeth Dole in response to Secretary of Energy James Watkins' request that OSHA assist him in determining the actions needed to assure that DOE has an exemplary safety and health program in place at its GOCOs. 6 figs.« less

Highway Safety Program Manual: Volume 14: Pedestrian Safety.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 14 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on pedestrian safety. The purpose and objectives of a pedestrian safety program are outlined. Federal authority in the area of pedestrian safety and policies regarding a safety program…

National Dam Safety Program. Union Lake Dam (MO 30225), Missouri - Kansas City Basin, Jackson County, Missouri. Phase I Inspection Report.

DTIC Science & Technology

1980-12-01

report was prepared under the National Program of Inspection of Non-Federal Dams. This report assesses the general condition of the dam with respect to...enter the complete contract or grant number(s) under which the wo-ieported was accomplished. Leave blank in in-house reports. Block 9. Performing...34Research and Development Planning Summary," which identifies the program element, project, task area, and work unit or equivalent under which the work

Highway Safety Program Manual: Volume 3: Motorcycle Safety.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 3 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on aspects of motorcycle safety. The purpose and specific objectives of a State motorcycle safety program are outlined. Federal authority in the highway safety area and general policies…

Railroad safety program, volume 1

NASA Technical Reports Server (NTRS)

1985-01-01

Since 1981, the Federal Railroad Administration (FRA) has annually prepared a National Inspection Plan (NIP) whose purpose is to summarize regional efforts to improve railroad transportation safety. The research concluded on the following tasks including the problems, conclusions and recommendations associated with these tasks is summarized: (1) the preparation of the 1983 NIP, with recommended procedures for improving future NIPs; (2) the development of an outline for the 1984 NIP, including a methodology for the allocation of inspection resources and other specialized regional activities; (3) the management and development of the 1984 NIP; and (4) the development of an instruction manual to be used in the preparation of future NIPs.

Formative evaluation of an Inspection Certificate Program (ICP) pilot in Toronto.

PubMed

Dwyer, J J; Komorowski, C; Ruf, F

1999-01-01

The inspection certificate program consists of food establishments voluntarily posting a certificate to inform patrons that inspection reports can be accessed from operators or the public health department. A three-month pilot program was evaluated for program improvement purposes. Only 65% of the selected operators were willing to participate, which suggests a challenge to fully implementing the program. Thirty-nine randomly selected restaurant operators participated. Most operators posted the certificate at the front entrance, and patrons indicated that reports were clear. Operators were supportive of the program. Some operators reported that the program was good for business and offered suggestions to improve it. A total of 583 requests for reports were made which suggests that the program empowered patrons to request reports, mostly from operators. Most patron evaluation forms came from a few operators that had no deficiencies, which limits generalizability.

Equipment Safety, Maintenance and Inspection: What the Oral Surgeon Needs to Know.

PubMed

Keeley, Katherine A

2017-05-01

Many oral and maxillofacial surgical procedures are done in an office-based setting, with many oral and maxillofacial surgeons involved in oversight of equipment maintenance. Goals in equipment management are to prevent harm to patients and staff, stay compliant with current regulations, and increase equipment longevity. This article covers the safety, maintenance, and inspection related to electrical equipment used in the treatment of patients, autoclaves, radiograph machines, nitrous oxide and oxygen medical gases, and required back-up power and lighting. An office should always follow manufacturer's recommendations regarding maintenance and inspection and document policies and monitoring so compliance can be assured. Copyright © 2017 Elsevier Inc. All rights reserved.

Safety, feasibility, and acceptability of visual inspection with acetic acid and immediate treatment with cryotherapy in rural Laos.

PubMed

Phongsavan, Keokedthong; Phengsavanh, Alongkone; Wahlström, Rolf; Marions, Lena

2011-09-01

To assess the safety, acceptability, and feasibility of visual inspection with acetic acid (VIA) followed by immediate treatment with cryotherapy as a single-visit approach for the prevention of cervical cancer among women in rural Laos. In 2009, women from 2 provinces in Laos were recruited for cervical cancer screening using VIA. If the inspection of the cervix showed a well-defined acetowhite lesion close to the os, immediate cryotherapy was offered. Of the 1926 women who were included, 134 (7.0%) tested positive on VIA. Of these, 113 (84.3%) underwent immediate cryotherapy and none declined treatment. One year after immediate cryotherapy, 77 (68.1%) women returned for a follow-up assessment and 68 (88.3%) were now VIA-negative. There was no report of a major complication during or after treatment. The acceptance of both VIA and cryotherapy was high. Visual inspection with acetic acid is a simple test that requires minimal infrastructure and expenditure. Integration of VIA with cryotherapy at the primary care level may constitute a feasible program for the prevention of cervical cancer in Laos. Copyright © 2011 International Federation of Gynecology and Obstetrics. Published by Elsevier Ireland Ltd. All rights reserved.

Railroad safety program Federal Railroad Administration OIG audit report

DOT National Transportation Integrated Search

1996-12-19

FRA's inspection and enforcement of Federal railroad safety standards were not effective and did not ensure railroads complied with safety standards. The Office of the Inspector General (OIG) found FRA inspectors did not cover areas necessary to ensu...

Influence of visual clutter on the effect of navigated safety inspection: a case study on elevator installation.

PubMed

Liao, Pin-Chao; Sun, Xinlu; Liu, Mei; Shih, Yu-Nien

2018-01-11

Navigated safety inspection based on task-specific checklists can increase the hazard detection rate, theoretically with interference from scene complexity. Visual clutter, a proxy of scene complexity, can theoretically impair visual search performance, but its impact on the effect of safety inspection performance remains to be explored for the optimization of navigated inspection. This research aims to explore whether the relationship between working memory and hazard detection rate is moderated by visual clutter. Based on a perceptive model of hazard detection, we: (a) developed a mathematical influence model for construction hazard detection; (b) designed an experiment to observe the performance of hazard detection rate with adjusted working memory under different levels of visual clutter, while using an eye-tracking device to observe participants' visual search processes; (c) utilized logistic regression to analyze the developed model under various visual clutter. The effect of a strengthened working memory on the detection rate through increased search efficiency is more apparent in high visual clutter. This study confirms the role of visual clutter in construction-navigated inspections, thus serving as a foundation for the optimization of inspection planning.

10 CFR 851.40 - Investigations and inspections.

Code of Federal Regulations, 2010 CFR

2010-01-01

... information. The worker or worker representative has the right to remain anonymous upon filing a request for... Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Enforcement Process § 851.40 Investigations... inspection. DOE Enforcement Officers have the right to enter work areas without delay to the extent...

Safety System Design for Technology Education. A Safety Guide for Technology Education Courses K-12.

ERIC Educational Resources Information Center

North Carolina State Dept. of Public Instruction, Raleigh. Div. of Vocational Education.

This manual is designed to involve both teachers and students in planning and controlling a safety system for technology education classrooms. The safety program involves students in the design and maintenance of the system by including them in the analysis of the classroom environment, job safety analysis, safety inspection, and machine safety…

National Dam Safety Program. Ehrlich Lake Dam (MO 10993), Mississippi - Salt - Quincy River Basin, Montgomery County, Missouri. Phase I Inspection Report.

DTIC Science & Technology

1980-12-01

IED MSa. DECL ASSI FICATION/DOWNGRAOING SCHEDULE 16 . ODISTRIBUTION STATEMENT (of this Report) Approved for release; distribution unlimited. 17...the dam with respect to safety, based on available data and on visual inspection, to determine if the dam poses hazards to human life or property . UWDO...General. Make Blocks 1. 4, 5, 6. 7, It. 13, 15, and 16 agree with the corresponding information on the report cover. Leave Blocks 2 and 3 blank. Block 1

Sample size allocation for food item radiation monitoring and safety inspection.

PubMed

Seto, Mayumi; Uriu, Koichiro

2015-03-01

The objective of this study is to identify a procedure for determining sample size allocation for food radiation inspections of more than one food item to minimize the potential risk to consumers of internal radiation exposure. We consider a simplified case of food radiation monitoring and safety inspection in which a risk manager is required to monitor two food items, milk and spinach, in a contaminated area. Three protocols for food radiation monitoring with different sample size allocations were assessed by simulating random sampling and inspections of milk and spinach in a conceptual monitoring site. Distributions of (131)I and radiocesium concentrations were determined in reference to (131)I and radiocesium concentrations detected in Fukushima prefecture, Japan, for March and April 2011. The results of the simulations suggested that a protocol that allocates sample size to milk and spinach based on the estimation of (131)I and radiocesium concentrations using the apparent decay rate constants sequentially calculated from past monitoring data can most effectively minimize the potential risks of internal radiation exposure. © 2014 Society for Risk Analysis.

Key Performance Indicators in the Evaluation of the Quality of Radiation Safety Programs.

PubMed

Schultz, Cheryl Culver; Shaffer, Sheila; Fink-Bennett, Darlene; Winokur, Kay

2016-08-01

Beaumont is a multiple hospital health care system with a centralized radiation safety department. The health system operates under a broad scope Nuclear Regulatory Commission license but also maintains several other limited use NRC licenses in off-site facilities and clinics. The hospital-based program is expansive including diagnostic radiology and nuclear medicine (molecular imaging), interventional radiology, a comprehensive cardiovascular program, multiple forms of radiation therapy (low dose rate brachytherapy, high dose rate brachytherapy, external beam radiotherapy, and gamma knife), and the Research Institute (including basic bench top, human and animal). Each year, in the annual report, data is analyzed and then tracked and trended. While any summary report will, by nature, include items such as the number of pieces of equipment, inspections performed, staff monitored and educated and other similar parameters, not all include an objective review of the quality and effectiveness of the program. Through objective numerical data Beaumont adopted seven key performance indicators. The assertion made is that key performance indicators can be used to establish benchmarks for evaluation and comparison of the effectiveness and quality of radiation safety programs. Based on over a decade of data collection, and adoption of key performance indicators, this paper demonstrates one way to establish objective benchmarking for radiation safety programs in the health care environment.

A management system for evaluating the Virginia periodic motor vehicle inspection program.

DOT National Transportation Integrated Search

1977-01-01

A system for management evaluation of Virginia's periodic motor vehicle inspection (PMVI) program was developed which is similar to that currently in use by the Virginia Department of State Police, except for changes in the sample size of inspection ...

Restaurant Inspection Scores and Foodborne Disease

PubMed Central

Pavlin, Boris I.; LaFleur, Bonnie J.; Ingram, L. Amanda; Schaffner, William

2004-01-01

Restaurants in the United States are regularly inspected by health departments, but few data exist regarding the effect of restaurant inspections on food safety. We examined statewide inspection records from January 1993 through April 2000. Data were available from 167,574 restaurant inspections. From 1993 to 2000, mean scores rose steadily from 80.2 to 83.8. Mean inspection scores of individual inspectors were 69–92. None of the 12 most commonly cited violations were critical food safety hazards. Establishments scoring <60 had a mean improvement of 16 points on subsequent inspections. Mean scores of restaurants experiencing foodborne disease outbreaks did not differ from restaurants with no reported outbreaks. A variety of factors influence the uniformity of restaurant inspections. The restaurant inspection system should be examined to identify ways to ensure food safety. PMID:15200861

33 CFR 3.40-15 - Sector New Orleans Marine Inspection Zone and Captain of the Port Zone; Marine Safety Unit Morgan...

Code of Federal Regulations, 2010 CFR

2010-07-01

... Inspection Zone and Captain of the Port Zone; Marine Safety Unit Morgan City. 3.40-15 Section 3.40-15... Morgan City. Sector New Orleans' office is located in New Orleans, LA. A subordinate unit, Marine Safety Unit (MSU) Morgan City, is located in Morgan City, LA. (a) Sector New Orleans' Marine Inspection Zone...

33 CFR 3.40-15 - Sector New Orleans Marine Inspection Zone and Captain of the Port Zone; Marine Safety Unit Morgan...

Code of Federal Regulations, 2011 CFR

2011-07-01

... Inspection Zone and Captain of the Port Zone; Marine Safety Unit Morgan City. 3.40-15 Section 3.40-15... Morgan City. Sector New Orleans' office is located in New Orleans, LA. A subordinate unit, Marine Safety Unit (MSU) Morgan City, is located in Morgan City, LA. (a) Sector New Orleans' Marine Inspection Zone...

Developing a methodology to inspect and assess conditions of short span structures on county roads in Wyoming.

DOT National Transportation Integrated Search

2015-12-01

Ever since the introduction of the National Bridge Inspection Standards (NBIS) in 1971, there has been a : tremendous amount of effort put into bridge rehabilitation programs and safety inspections. The : Wyoming Department of Transportation (WYDOT) ...

Continental United States Military Housing Inspection National Capital Region

DTIC Science & Technology

2015-08-13

that was flaking, peeling, or chalking. JBAB did not have an asbestos management program, plan, or an appointed asbestos program manager...housing partner to ensure inspection and maintenance plan is achieved; and • Implement an asbestos management plan and appoint an asbestos program...select environmental health and safety requirements, such as those for drinking water, radon, asbestos , and lead based paint. We conducted this

76 FR 81360 - Cooperative Inspection Programs: Interstate Shipment of Meat and Poultry Products; Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-28

.... FSIS-2008-0039] RIN 0583-AD37 Cooperative Inspection Programs: Interstate Shipment of Meat and Poultry... to ship meat and poultry products in interstate commerce. The final rule was published in the Federal... the Federal Register, the final rule, ``Cooperative Inspection Programs; Interstate Shipment of Meat...

33 CFR 3.25-20 - Sector North Carolina Marine Inspection Zone and Captain of the Port Zone; Marine Safety Unit...

Code of Federal Regulations, 2010 CFR

2010-07-01

... Inspection Zone and Captain of the Port Zone; Marine Safety Unit Wilmington: Cape Fear River Marine Inspection and Captain of the Port Zones. 3.25-20 Section 3.25-20 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY GENERAL COAST GUARD AREAS, DISTRICTS, SECTORS, MARINE INSPECTION ZONES, AND...

National Dam Safety Program. Silver Lake Dam (Inventory Number VA 16508). Potomac River Basin, Rockingham County, Virginia. Phase I Inspection Report.

DTIC Science & Technology

1980-07-01

NATIONAL DAM SAFETY PRGRAM .. For Aldc S f~ ’,/~ / ZTXS GRIA&I’ ’ ’, ’-t ’ lIncedI Jsti ficatio "--- - . - .’i -, ! Aval and/or Dist.I special...Only through frequent inspections can unsafe conditions be detected and only through continued care and maintenance can these conditions be prevented ...the dam and modify as necessary. 3) The eroded area located at the right abutment should be corrected in order to prevent continual or increased flow of

Workers inspect the range safety cable between the ET and SRBs

NASA Technical Reports Server (NTRS)

1999-01-01

Terry Kent (left), United Space Alliance, and James Silviano (right), NASA, inspect the range safety cable between the external tank and solid rocket boosters (SRB) on Space Shuttle Discovery. The cable, which relays a redundant emergency destruction signal between the SRBs in the unlikely event of a contingency, was damaged during close-out operations and is being replaced. Discovery's processing schedule leads to a target launch date of Dec. 6.

National Dam Safety Program. Lac Marseilles Dam (MO 30282), Mississippi - Kaskaskia - St. Louis Basin, St. Francois County, Missouri. Phase I Inspection Report.

DTIC Science & Technology

1981-01-01

thereof in such quantity as will yield 50 pounds of nitrogen per acre. In the case of 33 per cent amonium nitrate , the above provisions will be interpreted...Dam Safety, Lake, Dam Inspection, Private Dams S& ASTRACT (Ct0- m -. d Idenuutyl by block number) This report was prepared under the National...may be obtained from the Office of the Chief of Engineer., Washington, D . C., 20314. The purpose of a Phase I investigation is not to provide a

9 CFR 592.650 - Inspection.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Inspection. 592.650 Section 592.650 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG PRODUCTS INSPECTION VOLUNTARY INSPECTION OF EGG PRODUCTS Sanitary and Processing Requirements § 592.650 Inspection. Examinations of the ingredients,...

9 CFR 592.650 - Inspection.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Inspection. 592.650 Section 592.650 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG PRODUCTS INSPECTION VOLUNTARY INSPECTION OF EGG PRODUCTS Sanitary and Processing Requirements § 592.650 Inspection. Examinations of the ingredients,...

9 CFR 592.650 - Inspection.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Inspection. 592.650 Section 592.650 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG PRODUCTS INSPECTION VOLUNTARY INSPECTION OF EGG PRODUCTS Sanitary and Processing Requirements § 592.650 Inspection. Examinations of the ingredients,...

9 CFR 592.650 - Inspection.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Inspection. 592.650 Section 592.650 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG PRODUCTS INSPECTION VOLUNTARY INSPECTION OF EGG PRODUCTS Sanitary and Processing Requirements § 592.650 Inspection. Examinations of the ingredients,...

National Program for Inspection of Non-Federal Dams. Spectacle Swamp Dam (CT 00476), Connecticut Coastal Basin, Wilton, Connecticut. Phase I Inspection Report.

DTIC Science & Technology

1981-05-01

CT 00476 IA 𔄁V 7 4. TITLE (nd $ba#ile) S. TYPE OF REPORT a PERIOD COVERED Spectacle Swamp Dam INSPECTION REPORT NATIONAL PROGRAM FOR INSPECTION OF...PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELrihENT. PROJECT. TASK AREA & WORK UNIT NUMS1RS X 1I. CONTROLLING OFFICE NAME AND ADDRESS Ia ...SCNEDULE 16. DISTRIOUTION STATEMENT (1 tklReport) APPROVAL FOR PUBLIC RELEASE: DISTRIBUTION UNLIMITED 5 17. DISTRIOUTION STATEMENT (of IA * he r ieet

Basic Program Elements for Federal employee Occupational Safety and Health Programs and related matters; Subpart I for Recordkeeping and Reporting Requirements. Final rule.

PubMed

2013-08-05

OSHA is issuing a final rule amending the Basic Program Elements to require Federal agencies to submit their occupational injury and illness recordkeeping information to the Bureau of Labor Statistics (BLS) and OSHA on an annual basis. The information, which is already required to be created and maintained by Federal agencies, will be used by BLS to aggregate injury and illness information throughout the Federal government. OSHA will use the information to identify Federal establishments with high incidence rates for targeted inspection, and assist in determining the most effective safety and health training for Federal employees. The final rule also interprets several existing basic program elements in our regulations to clarify requirements applicable to Federal agencies, amends the date when Federal agencies must submit to the Secretary of Labor their annual report on occupational safety and health programs, amends the date when the Secretary of Labor must submit to the President the annual report on Federal agency safety and health, and clarifies that Federal agencies must include uncompensated volunteers when reporting and recording occupational injuries and illnesses.

9 CFR 390.4 - Facilities for inspection and copying.

Code of Federal Regulations, 2010 CFR

2010-01-01

.... 390.4 Section 390.4 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FOOD SAFETY AND INSPECTION SERVICE ADMINISTRATIVE PROVISIONS FREEDOM OF INFORMATION AND PUBLIC... Coordinator (FOIA), Food Safety and Inspection Service, Department of Agriculture, Washington, DC 20250-3700 ...

Restaurant inspection frequency: The RestoFreq Study.

PubMed

Medu, Olanrewaju; Turner, Hollie; Cushon, Jennifer A; Melis, Deborah; Rea, Leslie; Abdellatif, Treena; Neudorf, Cory O; Schwandt, Michael

2017-03-01

Foodborne illness is an important contributor to morbidity and health system costs in Canada. Using number of critical hazards as a proxy for food safety, we sought to better understand how to improve food safety in restaurants. We compared the current standard of annual inspections to twice-yearly inspections among restaurants "at risk" for food safety infractions. These were restaurants that had three or more elevated-risk inspection ratings in the preceding 36 months. We conducted a two-arm randomized controlled trial between November 2012 and October 2014. The intervention was twice-yearly routine restaurant inspection compared to standard once-yearly routine inspection. Included were all restaurants within Saskatoon Health Region that were assessed as "at risk", with 73 restaurants in the intervention arm and 78 in the control arm. Independent sample t-tests were conducted between groups to compare: i) average number of critical hazards per inspection; and ii) proportion of inspections resulting in a rating indicating an elevated hazard. Over time we noted statistically significant improvements across both study arms, in number of both critical food safety hazards (decreased by 61%) and elevated-risk inspection ratings (decreased by 45%) (p < 0.0001). We observed no significant differences between the two groups pre- or post-intervention. Results suggest increasing the number of annual routine inspections in high-risk restaurants was not associated with a significant difference in measures of compliance with food safety regulations. Findings of this study do not provide evidence supporting increased frequency of restaurant inspection from annually to twice annually.

Continental United States Military Housing Inspections Southeast

DTIC Science & Technology

2015-09-24

and safety, including focus on mold, asbestos , radon, lead-based paint, drinking water quality, and pest management. We conducted this inspection in...electrical system safety inspections. In addition, we inspected to EPA standards governing safe drinking water and toxic substances, radon, asbestos , and...inspections focused on mold, asbestos , radon, lead-based paint, drinking water quality, and pest management. We evaluated the associated plans and

Employer Rights and Responsibilities Following an OSHA Inspection

DTIC Science & Technology

1999-01-01

and health programs, some states require such programs; and • In state plan states, an employee who believes he/she has been discriminated against... employee who has exercised any right under this law, including the right to make safety and health complaints or to request an OSHA inspection.Complaints...the OSH Act clearly states that you have a continuing respon- sibility to comply with the OSH Act and assure your employees of safe and healthful

KENNEDY SPACE CENTER, FLA. - Jeff Thon, an SRB mechanic with United Space Alliance, tests a technique for vertical solid rocket booster propellant grain inspection. The inspection of segments is required as part of safety analysis.

NASA Image and Video Library

2003-09-11

KENNEDY SPACE CENTER, FLA. - Jeff Thon, an SRB mechanic with United Space Alliance, tests a technique for vertical solid rocket booster propellant grain inspection. The inspection of segments is required as part of safety analysis.

National Dam Safety Program. Junior Lake Dam, (MO 11526) Missouri - Kansas City Basin, Callaway County, Missouri. Phase I Inspection Report.

DTIC Science & Technology

1980-10-01

Lake, Dam Inspection, Private Dams 20 AWTACT (Ce ffm ew - m*1et N naeey ad identfy by block number) This report was prepared under the National Program...cO r " 7 - IM-.r Il: r’ o .rrr4 QM zc PLT DL1 ~OC.4..NW to~.. c pz acca ~ ~ ~ 0 AaO cr~c 0000000000 ca~cc 0 NOCC~C ~ j...a ~ in =o ,0 0 00 O 0~ co

Inspection Methods in Programming: Cliches and Plans.

DTIC Science & Technology

1987-12-01

PROGRAM ELEMENT. PROJECT. TASK Artificial Inteligence Laboratory AREA & WORK UN IT NUMBERS J 545 Technology Square Cambridge, MA 02139 $L. CONTROLLING...U) MASSACHUSETTS INST OF TECH CAMBRIDGE ARTIFICIAL INTELLIGENCE LAB C RICH DEC 87 AI-M-±05 UNCLASSIFIED NW014-B5-K-0124 F/G 12/5 NL ’lllll l l l...S %P W. J % % %s MASSACHUSETTS INSTITUTE OF TECHNOLOGY N ARTIFICIAL INTELLIGENCE LABORATORY 00 A.I. Memo No. 1005 December 1987 N Inspection Methods

30 CFR 56.7003 - Drill area inspection.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Drill area inspection. 56.7003 Section 56.7003... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling § 56.7003 Drill area inspection. The drilling area shall be inspected for hazards before...

30 CFR 56.7003 - Drill area inspection.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Drill area inspection. 56.7003 Section 56.7003... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling § 56.7003 Drill area inspection. The drilling area shall be inspected for hazards before...

30 CFR 56.7003 - Drill area inspection.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Drill area inspection. 56.7003 Section 56.7003... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling § 56.7003 Drill area inspection. The drilling area shall be inspected for hazards before...

30 CFR 56.7003 - Drill area inspection.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Drill area inspection. 56.7003 Section 56.7003... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling § 56.7003 Drill area inspection. The drilling area shall be inspected for hazards before...

30 CFR 56.7003 - Drill area inspection.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Drill area inspection. 56.7003 Section 56.7003... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling § 56.7003 Drill area inspection. The drilling area shall be inspected for hazards before...

Y-12 Groundwater Protection Program CY2012 Triennial Report Of The Monitoring Well Inspection And Maintenance Program Y-12 National Security Complex, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2013-09-01

This document is the triennial report for the Well Inspection and Maintenance Program of the Y- 12 Groundwater Protection Program (GWPP), at the U.S. Department of Energy (DOE) Y-12 National Security Complex (Y-12). This report formally documents well inspections completed by the GWPP on active and inactive wells at Y-12 during calendar years (CY) 2010 through 2012. In addition, this report also documents well inspections performed under the Y-12 Water Resources Restoration Program, which is administered by URS|CH2M Oak Ridge (UCOR). This report documents well maintenance activities completed since the last triennial inspection event (CY 2009); and provides summary tablesmore » of well inspections and well maintenance activities during the reference time period.« less

75 FR 56502 - National Advisory Committee on Meat and Poultry Inspection

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-16

... DEPARTMENT OF AGRICULTURE Food Safety and Inspection Service [Docket No. FSIS-2010-0030] National Advisory Committee on Meat and Poultry Inspection AGENCY: Food Safety and Inspection Service, USDA. ACTION: Notice of public meeting. SUMMARY: The Food Safety and Inspection Service (FSIS) is announcing, pursuant...

Multispectral fluorescence imaging techniques for nondestructive food safety inspection

NASA Astrophysics Data System (ADS)

Kim, Moon S.; Lefcourt, Alan M.; Chen, Yud-Ren

2004-03-01

The use of spectral sensing has gained acceptance as a rapid means for nondestructive inspection of postharvest food produce. Current technologies generally use color or a single wavelength camera technology. The applicability and sensitivity of these techniques can be expanded through the use of multiple wavelengths. Reflectance in the Vis/NIR is the prevalent spectral technique. Fluorescence, compared to reflectance, is regarded as a more sensitive technique due to its dynamic responses to subtle changes in biological entities. Our laboratory has been exploring fluorescence as a potential means for detection of quality and wholesomeness of food products. Applications of fluorescence sensing require an understanding of the spectral characteristics emanating from constituents and potential contaminants. A number of factors affecting fluorescence emission characteristics are discussed. Because of relatively low fluorescence quantum yield from biological samples, a system with a powerful pulse light source such as a laser coupled with a gated detection device is used to harvest fluorescence, in the presence of ambient light. Several fluorescence sensor platforms developed in our laboratory, including hyperspectral imaging, and laser-induced fluorescence (LIF) and steady-state fluorescence imaging systems with multispectral capabilities are presented. We demonstrate the potential uses of recently developed fluorescence imaging platforms in food safety inspection of apples contaminated with animal feces.

Literature and best practices scan : Vehicle Inspection and Maintenance (I/M) Programs

DOT National Transportation Integrated Search

2002-06-01

The state of Wisconsin operates one of the nation's most effective inspection/maintenance (I/M) programs. In Wisconsin's I/M program, vehicles registered in the Milwaukee metropolitan area are subjected to a transient emission test using the IM240 te...

The Determinants of Federal and State Enforcement of Workplace Safety Regulations: OSHA Inspections 1990-2010*

PubMed Central

Jung, Juergen

2013-01-01

We explore the determinants of inspection outcomes across 1.6 million Occupational Safety and Health Agency (OSHA) audits from 1990 through 2010. We find that discretion in enforcement differs in state and federally conducted inspections. State agencies are more sensitive to local economic conditions, finding fewer standard violations and fewer serious violations as unemployment increases. Larger companies receive greater lenience in multiple dimensions. Inspector issued fines and final fines, after negotiated reductions, are both smaller during Republican presidencies. Quantile regression analysis reveals that Presidential and Congressional party affiliations have their greatest impact on the largest negotiated reductions in fines. PMID:24659856

New technology for food safety: role of the new technology staff in FSIS

NASA Astrophysics Data System (ADS)

Early, Howard

2004-03-01

The Food Safety and Inspection Service (FSIS) has implemented new procedures for meat and poultry establishments, egg products plants, and companies that manufacture and sell technology to official establishments to notify the Agency of new technology that they propose to use in meat and poultry establishments or egg products plants. If the new technology could affect FSIS regulations, product safety, inspection procedures, or the safety of Federal inspection program personnel, then the establishment or plant would need to submit a written protocol to the Agency. As part of this process, the submitter will be expected to conduct in-plant trials of the new technology. The submitter will need to provide data to FSIS throughout the duration of the in-plant trial for the Agency to examine. Data may take several forms: laboratory results, weekly or monthly summary production reports, and evaluations from inspection program personnel.

Line-scan spatially offset Raman spectroscopy for inspecting subsurface food safety and quality

NASA Astrophysics Data System (ADS)

Qin, Jianwei; Chao, Kuanglin; Kim, Moon S.

2016-05-01

This paper presented a method for subsurface food inspection using a newly developed line-scan spatially offset Raman spectroscopy (SORS) technique. A 785 nm laser was used as a Raman excitation source. The line-shape SORS data was collected in a wavenumber range of 0-2815 cm-1 using a detection module consisting of an imaging spectrograph and a CCD camera. A layered sample, which was created by placing a plastic sheet cut from the original container on top of cane sugar, was used to test the capability for subsurface food inspection. A whole set of SORS data was acquired in an offset range of 0-36 mm (two sides of the laser) with a spatial interval of 0.07 mm. Raman spectrum from the cane sugar under the plastic sheet was resolved using self-modeling mixture analysis algorithms, demonstrating the potential of the technique for authenticating foods and ingredients through packaging. The line-scan SORS measurement technique provides a new method for subsurface inspection of food safety and quality.

77 FR 70409 - System Safety Program

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-26

...-0060, Notice No. 2] 2130-AC31 System Safety Program AGENCY: Federal Railroad Administration (FRA... passenger railroads to develop and implement a system safety program (SSP) to improve the safety of their... Division, U.S. Department of Transportation, Federal Railroad Administration, Office of Railroad Safety...

9 CFR 327.6 - Products for importation; program inspection, time and place; application for approval of...

Code of Federal Regulations, 2011 CFR

2011-01-01

... inspection, time and place; application for approval of facilities as official import inspection... § 327.6 Products for importation; program inspection, time and place; application for approval of..., wholesome, and otherwise not adulterated at the time the products are offered for importation into the...

9 CFR 327.6 - Products for importation; program inspection, time and place; application for approval of...

Code of Federal Regulations, 2012 CFR

2012-01-01

... inspection, time and place; application for approval of facilities as official import inspection... § 327.6 Products for importation; program inspection, time and place; application for approval of..., wholesome, and otherwise not adulterated at the time the products are offered for importation into the...

9 CFR 327.6 - Products for importation; program inspection, time and place; application for approval of...

Code of Federal Regulations, 2014 CFR

2014-01-01

... inspection, time and place; application for approval of facilities as official import inspection... § 327.6 Products for importation; program inspection, time and place; application for approval of..., wholesome, and otherwise not adulterated at the time the products are offered for importation into the...

9 CFR 327.6 - Products for importation; program inspection, time and place; application for approval of...

Code of Federal Regulations, 2013 CFR

2013-01-01

... inspection, time and place; application for approval of facilities as official import inspection... § 327.6 Products for importation; program inspection, time and place; application for approval of..., wholesome, and otherwise not adulterated at the time the products are offered for importation into the...

National Program for Inspection of Non-Federal Dams. Paper Mill Pond Dam (CT 00621), Connecticut River Basin, Vernon, Connecticut. Phase I Inspection Report.

DTIC Science & Technology

1981-03-01

HYDROLOGIC AND HYDRAULIC COMPUTATIONS E INFORMATION AS CONTAINED IN THE NATIONAL INVENTORY OF DAMS ,v ’walL.it, AM I OVERVIEV \\ PHOTO Iv 390 L-( ibb~ ~5~4 N...AS-A144 539 NATIONAL PROGRAM FOR INSPEGTION 0F NON-FEDERAL DAMS / PAPER MIL POND DAM (.(U CORPS OF ENGINEERS WALTHAM A S MA NEW ENGLANA DIV MAR...CATALOG NUMBER CT 00621A 4 TITLE (amdSubtile) S. TYPE OF REPORT & PERIOD’COVERED Paper Mill Pond Dam INSPECTION REPORT NATIONAL PROGRAM FOR INSPECTION

Safety in Outdoor Adventure Programs. S.O.A.P. Safety Policy.

ERIC Educational Resources Information Center

MacDonald, Wayne, Comp.; And Others

Drafted in 1978 as a working document for Safety in Outdoor Adventure Programs (S.O.A.P.) by a council of outdoor adventure programmers, checklists outline standard accepted safety policy for Outdoor Adventure Programs and Wilderness Adventure Programs conducted through public or private agencies in California. Safety policy emphasizes: the…

PRA (Probabilistic Risk Assessment) Applications Program for inspection at Oconee Unit 3

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gore, B.F.; Vo, T.V.; Harris, M.S.

1987-10-01

The extensive Oconee-3 PRA performed by EPRI has been analyzed to identify plant systems and components important to minimizing public risk, and to identify the primary failure modes of these components. This information has been tabulated, and correlated with inspection modules from the NRC Inspection and Enforcement Manual. The report presents a series of tables, organized by system and prioritized by public risk (in person-rem per year), which identify components associated with 98% of the inspectable risk due to plant operation. External events (earthquakes, tornadoes, fires and floods) are not addressed because inspections cannot directly minimize the risks from thesemore » events; however, flooding caused by the breach of internal systems is addressed. The systems addressed, in descending order of risk importance, are: Reactor Building Spray, R B Cooling, Condenser Circulating Water, Safety Relief Valves, Low Pressure Injection, Standby Shutdown Facility-High Pressure Injection, Low-Pressure Service Water, and Emergency Feedwater. This ranking is based on the Fussel-Vesely measure of risk importance, i.e., the fraction of the total risk which involves failures of the system of interest. 8 refs., 25 tabs.« less

Autonomous Mission Manager for Rendezvous, Inspection and Mating

NASA Technical Reports Server (NTRS)

Zimpfer, Douglas J.

2003-01-01

To meet cost and safety objectives, space missions that involve proximity operations between two vehicles require a high level of autonomy to successfully complete their missions. The need for autonomy is primarily driven by the need to conduct complex operations outside of communication windows, and the communication time delays inherent in space missions. Autonomy also supports the goals of both NASA and the DOD to make space operations more routine, and lower operational costs by reducing the requirement for ground personnel. NASA and the DoD have several programs underway that require a much higher level of autonomy for space vehicles. NASA's Space Launch Initiative (SLI) program has ambitious goals of reducing costs by a factor or 10 and improving safety by a factor of 100. DARPA has recently begun its Orbital Express to demonstrate key technologies to make satellite servicing routine. The Air Force's XSS-ll program is developing a protoflight demonstration of an autonomous satellite inspector. A common element in space operations for many NASA and DOD missions is the ability to rendezvous, inspect anclJor dock with another spacecraft. For DARPA, this is required to service or refuel military satellites. For the Air Force, this is required to inspect un-cooperative resident space objects. For NASA, this is needed to meet the primary SLI design reference mission of International Space Station re-supply. A common aspect for each of these programs is an Autonomous Mission Manager that provides highly autonomous planning, execution and monitoring of the rendezvous, inspection and docking operations. This paper provides an overview of the Autonomous Mission Manager (AMM) design being incorporated into many of these technology programs. This AMM provides a highly scalable level of autonomous operations, ranging from automatic execution of ground-derived plans to highly autonomous onboard planning to meet ground developed mission goals. The AMM provides the

Steam generator tube inspection in Japan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fukui, Shigetaka

1997-02-01

Steam generator tube inspection was first carried out in 1971 at Mihama Unit-1 that is first PWR plant in Japan, when the plant was brought into the first annual inspection. At that time, inspection was made on sampling basis, and only bobbin coil probe was used. After experiencing various kinds of tube degradations, inspection method was changed from sampling to all number of tubes, and various kinds of probes were used to get higher detectability of flaw. At present, it is required that all the tubes shall be inspected in their full length at each annual inspection using standard bobbinmore » coil probe, and some special probes for certain plants that have susceptibility of occurrence of flaw. Sleeve repaired portion is included in this inspection. As a result of analyses of eddy current testing data, all indications that have been evaluated to be 20% wall thickness or deeper shall be repaired by either plugging or sleeving, where flaw morphology is to be a wastage or wear. Other types of flaw such as IGA/SCC are not allowed to be left inservice when those indications are detected. These inspections are performed according to inspection procedures that are approved by regulatory authority. Actual inspections are witnessed by the Japan Power engineering and inspection corporation (JAPEIC)`s inspectors during data acquisition and analysis, and they issue inspection report to authority for review and approval. It is achieved high safety performance of steam generator through this method of inspections, however. some tube leakage problems were experienced in the past. To prevent recurrence of such events, government is conducting development and verification test program for new eddy current testing technology.« less

30 CFR 27.30 - Inspection.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Inspection. 27.30 Section 27.30 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS METHANE-MONITORING SYSTEMS Test Requirements § 27.30 Inspection. A detailed inspection...

30 CFR 27.30 - Inspection.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Inspection. 27.30 Section 27.30 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS METHANE-MONITORING SYSTEMS Test Requirements § 27.30 Inspection. A detailed inspection...

Implementing instructions for KSC systems and safety training

NASA Technical Reports Server (NTRS)

1973-01-01

The requirements for the safety training program are reported for KSC including transportation, inspection, checkout operations, maintenance of launch vehicles, spacecraft, ground support equipment, and launch teams. The responsibilities and mechanics for implementing the program are outlined.

Results of calendar year 1994 monitor well inspection and maintenance program, Y-12 Plant, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

McMaster, B.W.; Jones, S.B.; Sitzler, J.L.

1995-06-01

This document is a compendium of results of the calendar year 1994 Monitor Well Inspection and Maintenance Program at the Department of Energy Y-12 Plant in Oak Ridge, Tennessee. This report documents the work relating to well inspections and maintenance requests. Inspections are implemented in order to better assess the condition and maintenance needs of wells that are actively being monitored. Currently this approach calls for inspecting all wells on a routine (annual or triennial) basis which are: (1) in an active sampling program; (2) included in a hydrologic study; or (3) not in service, but not scheduled for pluggingmore » and abandonment. Routine inspections help to ensure that representative groundwater samples and hydrologic data are being collected, and contribute to the life expectancy of each well. This report formally presents well inspection and maintenance activities that were conducted at the Y-12 Plant during 1994. All inspections were conducted between April and December.« less

Quantifying the benefits of the Florida Transit Research Inspection Procurement Services (TRIPS) program.

DOT National Transportation Integrated Search

2013-04-01

This study details the analysis of the Florida Transit Research Inspection Procurement Services (TRIPS) Program. It provides a comparative assessment of the program with respect to out-of-state practice, provides recommendations to improve life cycle...

An Operational Safety and Health Program.

ERIC Educational Resources Information Center

Uhorchak, Robert E.

1983-01-01

Describes safety/health program activities at Research Triangle Institute (North Carolina). These include: radioisotope/radiation and hazardous chemical/carcinogen use, training, monitoring, disposal; chemical waste management; air monitoring and analysis; medical program; fire safety/training, including emergency planning; Occupational Safety and…

9 CFR 352.7 - Marking inspected products.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Section 352.7 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE..., the inspection mark applied to inspected and passed exotic animal carcasses, meat or meat food... abbreviations shall have the same force and effect as the inspection mark. The inspection mark or approved...

9 CFR 352.7 - Marking inspected products.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Section 352.7 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE..., the inspection mark applied to inspected and passed exotic animal carcasses, meat or meat food... abbreviations shall have the same force and effect as the inspection mark. The inspection mark or approved...

9 CFR 352.7 - Marking inspected products.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Section 352.7 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE..., the inspection mark applied to inspected and passed exotic animal carcasses, meat or meat food... abbreviations shall have the same force and effect as the inspection mark. The inspection mark or approved...

33 CFR 3.40-65 - Sector Ohio Valley Marine Inspection Zone and Captain of the Port Zone; Marine Safety Unit...

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 1 2012-07-01 2012-07-01 false Sector Ohio Valley Marine Inspection Zone and Captain of the Port Zone; Marine Safety Unit Pittsburgh. 3.40-65 Section 3.40-65 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY GENERAL COAST GUARD AREAS, DISTRICTS, SECTORS, MARINE INSPECTION ZONES, AND...

33 CFR 3.40-65 - Sector Ohio Valley Marine Inspection Zone and Captain of the Port Zone; Marine Safety Unit...

Code of Federal Regulations, 2014 CFR

2014-07-01

... 33 Navigation and Navigable Waters 1 2014-07-01 2014-07-01 false Sector Ohio Valley Marine Inspection Zone and Captain of the Port Zone; Marine Safety Unit Pittsburgh. 3.40-65 Section 3.40-65 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY GENERAL COAST GUARD AREAS, DISTRICTS, SECTORS, MARINE INSPECTION ZONES, AND...

33 CFR 3.40-65 - Sector Ohio Valley Marine Inspection Zone and Captain of the Port Zone; Marine Safety Unit...

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 1 2011-07-01 2011-07-01 false Sector Ohio Valley Marine Inspection Zone and Captain of the Port Zone; Marine Safety Unit Pittsburgh. 3.40-65 Section 3.40-65 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY GENERAL COAST GUARD AREAS, DISTRICTS, SECTORS, MARINE INSPECTION ZONES, AND...

33 CFR 3.40-65 - Sector Ohio Valley Marine Inspection Zone and Captain of the Port Zone; Marine Safety Unit...

Code of Federal Regulations, 2013 CFR

2013-07-01

... 33 Navigation and Navigable Waters 1 2013-07-01 2013-07-01 false Sector Ohio Valley Marine Inspection Zone and Captain of the Port Zone; Marine Safety Unit Pittsburgh. 3.40-65 Section 3.40-65 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY GENERAL COAST GUARD AREAS, DISTRICTS, SECTORS, MARINE INSPECTION ZONES, AND...

76 FR 30727 - Food and Drug Administration Food Safety Modernization Act: Focus on Inspections and Compliance

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-26

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2011-N-0366] Food and Drug Administration Food Safety Modernization Act: Focus on Inspections and Compliance AGENCY: Food and Drug Administration, HHS. ACTION: Notice of public meeting; request for comments. SUMMARY: The...

Informing a pedestrian safety improvement program.

DOT National Transportation Integrated Search

2009-01-01

Caltrans is scoping the development of a Pedestrian Safety Improvement Program (PSIP). In its mission, organization or implementation, such a program might be analogous to the agencys existing Highway Safety Improvement Program (HSIP). The HSIP (s...

5 CFR 8301.104 - Additional rules for employees of the Food Safety and Inspection Service.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 5 Administrative Personnel 3 2011-01-01 2011-01-01 false Additional rules for employees of the Food Safety and Inspection Service. 8301.104 Section 8301.104 Administrative Personnel DEPARTMENT OF AGRICULTURE SUPPLEMENTAL STANDARDS OF ETHICAL CONDUCT FOR EMPLOYEES OF THE DEPARTMENT OF AGRICULTURE § 8301.104 Additional rules for employees of the...

5 CFR 8301.104 - Additional rules for employees of the Food Safety and Inspection Service.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 5 Administrative Personnel 3 2012-01-01 2012-01-01 false Additional rules for employees of the Food Safety and Inspection Service. 8301.104 Section 8301.104 Administrative Personnel DEPARTMENT OF AGRICULTURE SUPPLEMENTAL STANDARDS OF ETHICAL CONDUCT FOR EMPLOYEES OF THE DEPARTMENT OF AGRICULTURE § 8301.104 Additional rules for employees of the...

5 CFR 8301.104 - Additional rules for employees of the Food Safety and Inspection Service.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 5 Administrative Personnel 3 2014-01-01 2014-01-01 false Additional rules for employees of the Food Safety and Inspection Service. 8301.104 Section 8301.104 Administrative Personnel DEPARTMENT OF AGRICULTURE SUPPLEMENTAL STANDARDS OF ETHICAL CONDUCT FOR EMPLOYEES OF THE DEPARTMENT OF AGRICULTURE § 8301.104 Additional rules for employees of the...

5 CFR 8301.104 - Additional rules for employees of the Food Safety and Inspection Service.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 5 Administrative Personnel 3 2013-01-01 2013-01-01 false Additional rules for employees of the Food Safety and Inspection Service. 8301.104 Section 8301.104 Administrative Personnel DEPARTMENT OF AGRICULTURE SUPPLEMENTAL STANDARDS OF ETHICAL CONDUCT FOR EMPLOYEES OF THE DEPARTMENT OF AGRICULTURE § 8301.104 Additional rules for employees of the...

5 CFR 8301.104 - Additional rules for employees of the Food Safety and Inspection Service.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Additional rules for employees of the Food Safety and Inspection Service. 8301.104 Section 8301.104 Administrative Personnel DEPARTMENT OF AGRICULTURE SUPPLEMENTAL STANDARDS OF ETHICAL CONDUCT FOR EMPLOYEES OF THE DEPARTMENT OF AGRICULTURE § 8301.104 Additional rules for employees of the...

Why system safety programs can fail

NASA Technical Reports Server (NTRS)

Hammer, W.

1971-01-01

Factors that cause system safety programs to fail are discussed from the viewpoint that in general these programs have not achieved their intended aims. The one item which is considered to contribute most to failure of a system safety program is a poor statement of work which consists of ambiguity, lack of clear definition, use of obsolete requirements, and pure typographical errors. It is pointed out that unless safety requirements are stated clearly, and where they are readily apparent as firm requirements, some of them will be overlooked by designers and contractors. The lack of clarity is stated as being a major contributing factor in system safety program failure and usually evidenced in: (1) lack of clear requirements by the procuring activity, (2) lack of clear understanding of system safety by other managers, and (3) lack of clear methodology to be employed by system safety engineers.

National Dam Safety Program. Tomahawk Lake Dam (Inventory Number N.Y. 618), Lower Hudson River Basin, Orange County, New York. Phase I Inspection Report,

DTIC Science & Technology

1981-08-14

Guidelines for Safety Inspection of Dams. d. Hazard Classification - Cherry Hill Road crosses the channel 1600 feet downstream from the dam and Tuthill...Road crosses the channel 1.5 miles below the dam. A home is located within 5 feet of the stream elevation, about 10 feet from the stream, and...below the dam. Cherry Hill Road crosses the channel 1600 feet downstream of the dam and Tuthill Road crosses the channel 1.5 miles below the dam. A home

77 FR 75118 - National Advisory Committee on Meat and Poultry Inspection

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-19

... DEPARTMENT OF AGRICULTURE Food Safety and Inspection Service [Docket No. FSIS-2012-0051] National Advisory Committee on Meat and Poultry Inspection AGENCY: Food Safety and Inspection Service, USDA. ACTION: Notice of public meeting. SUMMARY: Pursuant to the Federal Advisory Committee Act, the Food Safety and...

78 FR 43091 - Technical Operations Safety Action Program (T-SAP) and Air Traffic Safety Action Program (ATSAP)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-19

... Administration 14 CFR Part 193 [Docket No.: FAA-2013-0375] Technical Operations Safety Action Program (T-SAP) and Air Traffic Safety Action Program (ATSAP) AGENCY: Federal Aviation Administration (FAA), Department of Transportation (DOT). ACTION: Notice of Proposed Order Designating Safety Information as Protected from...

Dams and Levees: Safety Risks

NASA Astrophysics Data System (ADS)

Carter, N. T.

2017-12-01

The nation's flood risk is increasing. The condition of U.S. dams and levees contributes to that risk. Dams and levee owners are responsible for the safety, maintenance, and rehabilitation of their facilities. Dams-Of the more than 90,000 dams in the United States, about 4% are federally owned and operated; 96% are owned by state and local governments, public utilities, or private companies. States regulate dams that are not federally owned. The number of high-hazard dams (i.e., dams whose failure would likely result in the loss of human life) has increased in the past decade. Roughly 1,780 state-regulated, high-hazard facilities with structural ratings of poor or unsatisfactory need rehabilitation. Levees-There are approximately 100,000 miles of levees in the nation; most levees are owned and maintained by municipalities and agricultural districts. Few states have levee safety programs. The U.S. Army Corps of Engineers (Corps) inspects 15,000 miles of levees, including levees that it owns and local levees participating in a federal program to assist with certain post-flood repairs. Information is limited on how regularly other levees are inspected. The consequence of a breach or failure is another aspect of risk. State and local governments have significant authority over land use and development, which can shape the social and economic impacts of a breach or failure; they also lead on emergency planning and related outreach. To date, federal dam and levee safety efforts have consisted primarily of (1) support for state dam safety standards and programs, (2) investments at federally owned dams and levees, and (3) since 2007, creation of a national levee database and enhanced efforts and procedures for Corps levee inspections and assessments. In Public Law 113-121, enacted in 2014, Congress (1) directed the Corps to develop voluntary guidelines for levee safety and an associated hazard potential classification system for levees, and (2) authorized support for the

National Program for Inspection of Non-Federal Dams. Provin Mountain Reservoir (MA 00528) Connecticut River Basin, Agawam, Massachusetts. Phase I Inspection Report.

DTIC Science & Technology

1981-06-01

The following deficiencies were observed at the site: areas of * . localized sloughing in the rock slope of the east and west sides of Reservoir No. 1... WEST SPRINGFIELD, MASS QUADRANGLE 1979 Vi NATIONAL DAM INSPECTION PROGRAM PHASE I INSPECTION REPORT PROVIN MOUNTAIN RESERVOIR SECTION 1 PROJECT...his address is Northwest Street, West Feeding Fills, Agawam, Massa- chusetts (telephone 413/786-3030). . (g) Purpose of the Dar. Provin Mountain

33 CFR 164.80 - Tests, inspections, and voyage planning.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Tests, inspections, and voyage... SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY NAVIGATION SAFETY REGULATIONS § 164.80 Tests, inspections... shall ensure that the following tests and inspections of gear occur before the vessel embarks on a...

33 CFR 164.80 - Tests, inspections, and voyage planning.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Tests, inspections, and voyage... SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY NAVIGATION SAFETY REGULATIONS § 164.80 Tests, inspections... shall ensure that the following tests and inspections of gear occur before the vessel embarks on a...

33 CFR 164.80 - Tests, inspections, and voyage planning.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Tests, inspections, and voyage... SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY NAVIGATION SAFETY REGULATIONS § 164.80 Tests, inspections... shall ensure that the following tests and inspections of gear occur before the vessel embarks on a...

33 CFR 164.80 - Tests, inspections, and voyage planning.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Tests, inspections, and voyage... SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY NAVIGATION SAFETY REGULATIONS § 164.80 Tests, inspections... shall ensure that the following tests and inspections of gear occur before the vessel embarks on a...

The Potential of Sonic IR to Inspect Aircraft Components Traditionally Inspected with Fluorescent Penetrant and or Magnetic Particle Inspection

NASA Astrophysics Data System (ADS)

DiMambro, J.; Ashbaugh, D. M.; Han, X.; Favro, L. D.; Lu, J.; Zeng, Z.; Li, W.; Newaz, G. M.; Thomas, R. L.

2006-03-01

Sandia National Laboratories Airworthiness Assurance Nondestructive Inspection Validation Center (AANC) provides independent and quantitative evaluations of new and enhanced inspection, to developers, users, and regulators of aircraft. Wayne State University (WSU) has developed and patented an inspection technique using high-power ultrasonic excitation and infrared technology to detect defects in a variety of materials. AANC and WSU are working together as part of the FAA Sonic Infrared Technology Transfer Program. The ultimate goal of the program is to implement Sonic IR in the aviation field where appropriate. The capability of Sonic IR imaging to detect cracks in components commonly inspected with magnetic particle or liquid penetrant inspection in the field is of interest to industry.

Aviation Safety/Automation Program Conference

NASA Technical Reports Server (NTRS)

Morello, Samuel A. (Compiler)

1990-01-01

The Aviation Safety/Automation Program Conference - 1989 was sponsored by the NASA Langley Research Center on 11 to 12 October 1989. The conference, held at the Sheraton Beach Inn and Conference Center, Virginia Beach, Virginia, was chaired by Samuel A. Morello. The primary objective of the conference was to ensure effective communication and technology transfer by providing a forum for technical interchange of current operational problems and program results to date. The Aviation Safety/Automation Program has as its primary goal to improve the safety of the national airspace system through the development and integration of human-centered automation technologies for aircraft crews and air traffic controllers.

9 CFR 307.1 - Facilities for Program employees.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Facilities for Program employees. 307.1 Section 307.1 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION FACILITIES FOR...

9 CFR 307.1 - Facilities for Program employees.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Facilities for Program employees. 307.1 Section 307.1 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION FACILITIES FOR...

9 CFR 307.1 - Facilities for Program employees.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Facilities for Program employees. 307.1 Section 307.1 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION FACILITIES FOR...

9 CFR 355.7 - Inauguration of inspection.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Inauguration of inspection. 355.7 Section 355.7 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE... INSPECTION AND CERTIFICATION CERTIFIED PRODUCTS FOR DOGS, CATS, AND OTHER CARNIVORA; INSPECTION...

9 CFR 355.7 - Inauguration of inspection.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Inauguration of inspection. 355.7 Section 355.7 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE... INSPECTION AND CERTIFICATION CERTIFIED PRODUCTS FOR DOGS, CATS, AND OTHER CARNIVORA; INSPECTION...

FMCSA safety program effectiveness measurement: intervention model fiscal year 2009.

DOT National Transportation Integrated Search

2013-04-01

The Federal Motor Carrier Safety Administration (FMCSA), in cooperation with the researcher, has developed an analytic model to measure the effectiveness of roadside inspections and traffic enforcements in terms of crashes avoided, injuries avoided, ...

47 CFR 80.59 - Compulsory ship inspections.

Code of Federal Regulations, 2011 CFR

2011-10-01

...) Inspection of ships subject to the Communications Act or the Safety Convention. (1) The FCC will not normally conduct the required inspections of ships subject to the inspection requirements of the Communications Act... inspections are intended to ensure the availability of communications capability during a distress the...

47 CFR 80.59 - Compulsory ship inspections.

Code of Federal Regulations, 2010 CFR

2010-10-01

...) Inspection of ships subject to the Communications Act or the Safety Convention. (1) The FCC will not normally conduct the required inspections of ships subject to the inspection requirements of the Communications Act... inspections are intended to ensure the availability of communications capability during a distress the...

47 CFR 80.59 - Compulsory ship inspections.

Code of Federal Regulations, 2013 CFR

2013-10-01

...) Inspection of ships subject to the Communications Act or the Safety Convention. (1) The FCC will not normally conduct the required inspections of ships subject to the inspection requirements of the Communications Act... inspections are intended to ensure the availability of communications capability during a distress the...

47 CFR 80.59 - Compulsory ship inspections.

Code of Federal Regulations, 2012 CFR

2012-10-01

...) Inspection of ships subject to the Communications Act or the Safety Convention. (1) The FCC will not normally conduct the required inspections of ships subject to the inspection requirements of the Communications Act... inspections are intended to ensure the availability of communications capability during a distress the...

47 CFR 80.59 - Compulsory ship inspections.

Code of Federal Regulations, 2014 CFR

2014-10-01

...) Inspection of ships subject to the Communications Act or the Safety Convention. (1) The FCC will not normally conduct the required inspections of ships subject to the inspection requirements of the Communications Act... inspections are intended to ensure the availability of communications capability during a distress the...

9 CFR 390.4 - Facilities for inspection and copying.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Facilities for inspection and copying. 390.4 Section 390.4 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FOOD SAFETY AND INSPECTION SERVICE ADMINISTRATIVE PROVISIONS FREEDOM OF INFORMATION AND PUBLIC INFORMATION § 390.4 Facilities for...

9 CFR 390.4 - Facilities for inspection and copying.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Facilities for inspection and copying. 390.4 Section 390.4 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FOOD SAFETY AND INSPECTION SERVICE ADMINISTRATIVE PROVISIONS FREEDOM OF INFORMATION AND PUBLIC INFORMATION § 390.4 Facilities for...

9 CFR 390.4 - Facilities for inspection and copying.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Facilities for inspection and copying. 390.4 Section 390.4 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FOOD SAFETY AND INSPECTION SERVICE ADMINISTRATIVE PROVISIONS FREEDOM OF INFORMATION AND PUBLIC INFORMATION § 390.4 Facilities for...

9 CFR 390.4 - Facilities for inspection and copying.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Facilities for inspection and copying. 390.4 Section 390.4 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FOOD SAFETY AND INSPECTION SERVICE ADMINISTRATIVE PROVISIONS FREEDOM OF INFORMATION AND PUBLIC INFORMATION § 390.4 Facilities for...

33 CFR 3.40-65 - Sector Ohio Valley Marine Inspection Zone and Captain of the Port Zone; Marine Safety Unit...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Sector Ohio Valley Marine....40-65 Sector Ohio Valley Marine Inspection Zone and Captain of the Port Zone; Marine Safety Unit Pittsburgh. Sector Ohio Valley's office is located in Louisville, KY. A subordinate unit, Marine Safety Unit...

9 CFR 381.67 - Young chicken and squab slaughter inspection rate maximums under traditional inspection procedure.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Young chicken and squab slaughter inspection rate maximums under traditional inspection procedure. 381.67 Section 381.67 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS...

32 CFR 310.44 - Inspection reporting.

Code of Federal Regulations, 2010 CFR

2010-07-01

... National Defense Department of Defense (Continued) OFFICE OF THE SECRETARY OF DEFENSE (CONTINUED) PRIVACY PROGRAM DOD PRIVACY PROGRAM Inspections § 310.44 Inspection reporting. (a) Document the findings of the... appropriate, shall reflect overall assets of the Component Privacy Program inspected, or portion thereof...

49 CFR 237.109 - Bridge inspection records.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Bridge inspection records. 237.109 Section 237.109..., DEPARTMENT OF TRANSPORTATION BRIDGE SAFETY STANDARDS Bridge Inspection § 237.109 Bridge inspection records... performed on those bridges under this part. (b) Each record of an inspection under the bridge management...

49 CFR 237.109 - Bridge inspection records.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Bridge inspection records. 237.109 Section 237.109..., DEPARTMENT OF TRANSPORTATION BRIDGE SAFETY STANDARDS Bridge Inspection § 237.109 Bridge inspection records... performed on those bridges under this part. (b) Each record of an inspection under the bridge management...

30 CFR 57.7003 - Drill area inspection.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Drill area inspection. 57.7003 Section 57.7003... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface Only § 57.7003 Drill area inspection. The drilling area shall be...

30 CFR 57.7003 - Drill area inspection.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Drill area inspection. 57.7003 Section 57.7003... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface Only § 57.7003 Drill area inspection. The drilling area shall be...

30 CFR 57.7003 - Drill area inspection.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Drill area inspection. 57.7003 Section 57.7003... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface Only § 57.7003 Drill area inspection. The drilling area shall be...

30 CFR 57.7003 - Drill area inspection.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Drill area inspection. 57.7003 Section 57.7003... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface Only § 57.7003 Drill area inspection. The drilling area shall be...

30 CFR 57.7003 - Drill area inspection.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Drill area inspection. 57.7003 Section 57.7003... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface Only § 57.7003 Drill area inspection. The drilling area shall be...

9 CFR 302.1 - Establishments requiring inspection.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Establishments requiring inspection. 302.1 Section 302.1 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION APPLICATION O...

9 CFR 302.1 - Establishments requiring inspection.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Establishments requiring inspection. 302.1 Section 302.1 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION APPLICATION O...

9 CFR 304.1 - Application for inspection.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Application for inspection. 304.1 Section 304.1 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION APPLICATION FOR...

9 CFR 302.1 - Establishments requiring inspection.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Establishments requiring inspection. 302.1 Section 302.1 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION APPLICATION O...

9 CFR 304.1 - Application for inspection.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Application for inspection. 304.1 Section 304.1 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION APPLICATION FOR...

9 CFR 304.1 - Application for inspection.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Application for inspection. 304.1 Section 304.1 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION APPLICATION FOR...

9 CFR 590.660 - Inspection of exempted plants.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Inspection of exempted plants. 590.660 Section 590.660 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG PRODUCTS INSPECTION INSPECTION OF EGGS AND EGG PRODUCTS (EGG PRODUCTS INSPECTION ACT) Exempted Egg...

9 CFR 590.660 - Inspection of exempted plants.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Inspection of exempted plants. 590.660 Section 590.660 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG PRODUCTS INSPECTION INSPECTION OF EGGS AND EGG PRODUCTS (EGG PRODUCTS INSPECTION ACT) Exempted Egg...

Software Formal Inspections Guidebook

NASA Technical Reports Server (NTRS)

1993-01-01

The Software Formal Inspections Guidebook is designed to support the inspection process of software developed by and for NASA. This document provides information on how to implement a recommended and proven method for conducting formal inspections of NASA software. This Guidebook is a companion document to NASA Standard 2202-93, Software Formal Inspections Standard, approved April 1993, which provides the rules, procedures, and specific requirements for conducting software formal inspections. Application of the Formal Inspections Standard is optional to NASA program or project management. In cases where program or project management decide to use the formal inspections method, this Guidebook provides additional information on how to establish and implement the process. The goal of the formal inspections process as documented in the above-mentioned Standard and this Guidebook is to provide a framework and model for an inspection process that will enable the detection and elimination of defects as early as possible in the software life cycle. An ancillary aspect of the formal inspection process incorporates the collection and analysis of inspection data to effect continual improvement in the inspection process and the quality of the software subjected to the process.

New Automated System Available for Reporting Safety Concerns | Poster

Cancer.gov

A new system has been developed for reporting safety issues in the workplace. The Environment, Health, and Safety’s (EHS’) Safety Inspection and Issue Management System (SIIMS) is an online resource where any employee can report a problem or issue, said Siobhan Tierney, program manager at EHS.

30 CFR 77.1501 - Auger mining; inspections.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Auger mining; inspections. 77.1501 Section 77.1501 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND... Auger Mining § 77.1501 Auger mining; inspections. (a) The face of all highwalls, to a distance of 25...

National Dam Inspection Program. Converse Lake Dam (CT 00044). Connecticut Coastal Basin, Greenwich, Connecticut. Phase I Inspection Report.

DTIC Science & Technology

1980-02-01

Guidelines for Safety Inspection of Dams, and with good engineering judgement and practice, and is hereby submitted for approval. ’ /00s~rs H W. NT’EGAN...below the top of the dam, with water flowing over the spillway. b. Dam Crest - The top of the dam is a concrete cap and is in good condition (Photo 1...the masonry portion is not substantial the dam is not safe. Masonry on water side is a good job of cement rubble. Top width is 7’. But it is doubtful

30 CFR 77.1713 - Daily inspection of surface coal mine; certified person; reports of inspection.

Code of Federal Regulations, 2010 CFR

2010-07-01

... more often if necessary for safety, each active working area and each active surface installation shall...; certified person; reports of inspection. 77.1713 Section 77.1713 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES...

Shipshape: sanitation inspections on cruise ships, 1990-2005, Vessel Sanitation Program, Centers for Disease Control and Prevention.

PubMed

Cramer, Elaine H; Blanton, Curtis J; Otto, Charles

2008-03-01

In the course of a successful collaboration between the Centers for Disease Control and Prevention (CDC) and the cruise ship industry on reducing common-source outbreaks, CDC's Vessel Sanitation Program (VSP) has expanded its training, education, and cruise ship inspection programs. The study reported here evaluated 15 years of ship sanitation inspection data from the National Center for Environmental Health and assessed performance in specific sanitation categories from 1996 to 2005. During the period 1990-2005, scores from cruise ship environmental sanitation inspections steadily improved. The percentage of inspections with violations decreased among five of nine categories. Those five categories were Washing Facilities, Contact Surfaces, Facility Maintenance, Food Handling, and Communicable Disease Practices. Inspection violations increased proportionally in the categories of Swimming Pools and Water System Protection/Chart Recording. Overall continued good performance in most sanitation categories is likely attributable to on-site training during inspections, improvements in ship construction, and a switch from hot-holding temperatures to time limits as a public health control for foods on display.

National Dam Safety Program. Potake Lake Dam (Inventory Number N.Y. 970), Passaic River Basin, Lower Hudson River Area, Rockland County, New York. Phase I Inspection Report,

DTIC Science & Technology

1981-08-14

facilitate thedischarge of storm flows. 2. The animal burrows, depressions , and tire ruts onthe crest of the dam should be filled, compacted and seeded. 3...storm flows. 2. The animal burrows, depressions , and tire ruts on the crest of the dam should be filled, compacted, and seeded...defined by the Recommended Guidelines for Safety Inspection of Dams (Reference 13, Appendix D). d. Hazard Classifications - Cranberry Lake Dam is one mile

75 FR 20038 - Railroad Safety Technology Grant Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-16

...] Railroad Safety Technology Grant Program AGENCY: Federal Railroad Administration, Department of Transportation. ACTION: Notice of Funds Availability, Railroad Safety Technology Program-Correction of Grant... Railroad Safety Technology Program, in the section, ``Requirements and Conditions for Grant Applications...

9 CFR 352.9 - Report of inspection work.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Report of inspection work. 352.9 Section 352.9 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE... inspection work. Reports of the work of inspection carried on within the field ante-mortem inspection area of...

49 CFR 229.25 - Tests: Every periodic inspection.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Tests: Every periodic inspection. 229.25 Section... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Inspections and Tests § 229.25 Tests: Every periodic inspection. Each periodic inspection shall include the following: (a) All...

An Overview of the NASA Aviation Safety Program Propulsion Health Monitoring Element

NASA Technical Reports Server (NTRS)

Simon, Donald L.

2000-01-01

The NASA Aviation Safety Program (AvSP) has been initiated with aggressive goals to reduce the civil aviation accident rate, To meet these goals, several technology investment areas have been identified including a sub-element in propulsion health monitoring (PHM). Specific AvSP PHM objectives are to develop and validate propulsion system health monitoring technologies designed to prevent engine malfunctions from occurring in flight, and to mitigate detrimental effects in the event an in-flight malfunction does occur. A review of available propulsion system safety information was conducted to help prioritize PHM areas to focus on under the AvSP. It is noted that when a propulsion malfunction is involved in an aviation accident or incident, it is often a contributing factor rather than the sole cause for the event. Challenging aspects of the development and implementation of PHM technology such as cost, weight, robustness, and reliability are discussed. Specific technology plans are overviewed including vibration diagnostics, model-based controls and diagnostics, advanced instrumentation, and general aviation propulsion system health monitoring technology. Propulsion system health monitoring, in addition to engine design, inspection, maintenance, and pilot training and awareness, is intrinsic to enhancing aviation propulsion system safety.

30 CFR 56.4201 - Inspection.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Fire Prevention and Control... following schedules: (1) Fire extinguishers shall be inspected visually at least once a month to determine...

30 CFR 57.4201 - Inspection.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Fire Prevention and Control... following schedules: (1) Fire extinguishers shall be inspected visually at least once a month to determine...

An Evaluation of the California Injury and Illness Prevention Program

PubMed Central

Mendeloff, John; Gray, Wayne B.; Haviland, Amelia M.; Main, Regan; Xia, Jing

2012-01-01

Abstract The Injury and Illness Prevention Program (IIPP) requirement has been the most frequently cited standard in California workplace health and safety inspections almost every year since it became effective in July 1991. Every workplace safety inspection must assess compliance with the IIPP. This article presents the results of an evaluation of the IIPP's effects on worker injuries in California and should inform policy both in California and in the federal Occupational Safety and Health Administration (OSHA) program, which has made the adoption of a similar national requirement a top priority. Using data from the Workers' Compensation Information System, OSHA Data Initiative statistics, and Workers' Compensation Insurance Rating Bureau of California reports on medical and indemnity claims from single-establishment firms, the evaluation team analyzed the impact of citations for violations of the IIPP on safety performance by (1) using the number of citations as a measure of effectiveness and (2) assessing the number of establishments that were cited for noncompliance and then came into compliance. They found that enforcement of the IIPP appears to prevent injuries only when inspectors cite firms for violations of specific subsections of that standard. Eighty percent of the citations of the IIPP by the California Division of Occupational Safety and Health program are for only a different section, the one that requires employers to have a written IIPP. The specific subsections refer to the provisions that mandate surveying and fixing hazards, investigating the causes of injuries, and training employees to work safely. Because about 25 percent of all inspections cite the IIPP, citations of the specific subsections occur in about 5 percent of all inspections. In those inspections, the total recordable injury rate falls by more than 20 percent in the two years following the inspection. PMID:28083238

Machine vision inspection of railroad track

DOT National Transportation Integrated Search

2011-01-10

North American Railways and the United States Department of Transportation : (US DOT) Federal Railroad Administration (FRA) require periodic inspection of railway : infrastructure to ensure the safety of railway operation. This inspection is a critic...

Impact of preparing for OSHA local emphasis program inspections of New York dairy farms: Case studies and financial cost analysis.

PubMed

Gadomski, Anne M; Vargha, Marybeth; Tallman, Nancy; Scribani, Melissa B; Kelsey, Timothy W

2016-03-01

OSHA inspection of dairy farms began in July 1, 2014 in New York State. As of September 2014, a total of eight farms were randomly selected for inspection. This case study addresses how dairy farm managers prepared for these inspections, and identifies farm level costs preparing for inspection and/or being inspected. Four farms that were OSHA inspected and 12 farms that were not inspected were included in this mixed method evaluation using a multimodal (telephone, email, or mail) survey. Descriptive analysis was carried out using frequencies, proportions, means, and medians. Overall, the impact of OSHA inspections was positive, leading to improved safety management and physical changes on the farm and worker trainings, although the farmers' perspectives about OSHA inspection were mixed. The cost of compliance was low relative to estimated overall production costs. Clarifications and engineering solutions for specific dairy farm hazard exposures are needed to facilitate compliance with OSHA regulations. © 2015 Wiley Periodicals, Inc.

NASA Aviation Safety Program Systems Analysis/Program Assessment Metrics Review

NASA Technical Reports Server (NTRS)

Louis, Garrick E.; Anderson, Katherine; Ahmad, Tisan; Bouabid, Ali; Siriwardana, Maya; Guilbaud, Patrick

2003-01-01

The goal of this project is to evaluate the metrics and processes used by NASA's Aviation Safety Program in assessing technologies that contribute to NASA's aviation safety goals. There were three objectives for reaching this goal. First, NASA's main objectives for aviation safety were documented and their consistency was checked against the main objectives of the Aviation Safety Program. Next, the metrics used for technology investment by the Program Assessment function of AvSP were evaluated. Finally, other metrics that could be used by the Program Assessment Team (PAT) were identified and evaluated. This investigation revealed that the objectives are in fact consistent across organizational levels at NASA and with the FAA. Some of the major issues discussed in this study which should be further investigated, are the removal of the Cost and Return-on-Investment metrics, the lack of the metrics to measure the balance of investment and technology, the interdependencies between some of the metric risk driver categories, and the conflict between 'fatal accident rate' and 'accident rate' in the language of the Aviation Safety goal as stated in different sources.

49 CFR 180.511 - Acceptable results of inspections and tests.

Code of Federal Regulations, 2011 CFR

2011-10-01

...) Safety system inspection. A tank car successfully passes the safety system inspection when each thermal..., distortion, excessive permanent expansion, or other evidence of weakness that might render the tank car...

49 CFR 237.107 - Conduct of bridge inspections.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Conduct of bridge inspections. 237.107 Section 237... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION BRIDGE SAFETY STANDARDS Bridge Inspection § 237.107 Conduct of bridge inspections. Bridge inspections shall be conducted under the direct supervision of a designated...

49 CFR 237.107 - Conduct of bridge inspections.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Conduct of bridge inspections. 237.107 Section 237... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION BRIDGE SAFETY STANDARDS Bridge Inspection § 237.107 Conduct of bridge inspections. Bridge inspections shall be conducted under the direct supervision of a designated...

Surviving your first OSHA inspection.

PubMed

Coughlin, L; Jukkala, P

1994-05-01

With the inception of the bloodborne pathogens standard, home care agencies are more likely to undergo an inspection by the Occupational Safety and Health Administration. What should employers know, and how can they always be prepared for the startling announcement of an OSHA inspection?

NDE Technology Development Program for Non-Visual Volumetric Inspection Technology; Sensor Effectiveness Testing Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moran, Traci L.; Larche, Michael R.; Denslow, Kayte M.

The Pacific Northwest National Laboratory (PNNL) located in Richland, Washington, hosted and administered Sensor Effectiveness Testing that allowed four different participants to demonstrate the NDE volumetric inspection technologies that were previously demonstrated during the Technology Screening session. This document provides a Sensor Effectiveness Testing report for the final part of Phase I of a three-phase NDE Technology Development Program designed to identify and mature a system or set of non-visual volumetric NDE technologies for Hanford DST primary liner bottom inspection. Phase I of the program will baseline the performance of current or emerging non-visual volumetric NDE technologies for their abilitymore » to detect and characterize primary liner bottom flaws, and identify candidate technologies for adaptation and maturation for Phase II of the program.« less

9 CFR 304.1 - Application for inspection.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Application for inspection. 304.1 Section 304.1 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY...

9 CFR 302.1 - Establishments requiring inspection.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Establishments requiring inspection. 302.1 Section 302.1 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY...

9 CFR 354.63 - Marking inspected products.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Marking inspected products. 354.63 Section 354.63 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY...

78 FR 35056 - Effectiveness of the Reactor Oversight Process Baseline Inspection Program

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-11

... NUCLEAR REGULATORY COMMISSION [NRC-2013-0125] Effectiveness of the Reactor Oversight Process... the effectiveness of the reactor oversight process (ROP) baseline inspection program with members of... Nuclear Reactor Regulations, U.S. Nuclear Regulatory Commission, Washington, DC 20555-0001; telephone: 301...

National Dam Safety Program. Nelson Dam (Inventory Number VA 12501), James River Basin, Nelson County, Virginia. Phase I Inspection Report.

DTIC Science & Technology

1981-06-01

during tropical storm Camille. 5.4 Flood Potential: The 100-Year Flood, 1/2 PMF, and PH? were developed by use of the HEC-l computer program (Reference 2...Appendix V) and routed through the reservoir using the NWS-Dambreak computer program (Reference 3, Appendix V). Clark’s Tc and R coefficients for...AD-AO" 330 ARMY ENGINEER DISTRICT NORFOLK VA F/6 13/13 NATIONAL DAM SAFETY PROGRAM . NELSON DAM (INVENTORY NUMBER VA 12--ETC(U) JUN 81 B 0 TARANUNCL

Highway Safety Program Manual: Volume 13: Traffic Engineering Services.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 13 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) focuses on traffic engineering services. The introduction outlines the purposes and objectives of Highway Safety Program Standard 13 and the Highway Safety Program Manual. Program development and…

9 CFR 381.182 - Reports of inspection work.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Reports of inspection work. 381.182 Section 381.182 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE....182 Reports of inspection work. Reports of the inspection work carried on within official...

[Evaluation of the effectiveness of occupational safety and health inspections of construction sites in the Piedmont region from 2001 to 2005].

PubMed

Bruno, Santina; Bena, Antonella; Debernardi, Maria Luisa; Nava, S; Pastore, Raffaella; Proietti, C; Quarta, D

2009-01-01

To assess the effectiveness of safety inspections in the construction industry in Piedmont in terms of exposure to risk and injuries. We conducted a retrospective analysis of the surveillance activities carried out in Piedmont between 2001 and 2005: to this purpose, we used a logical framework and we identified indicators to evaluate the process and its impact on exposure and injuries. fixed standards involving the number of safety inspections and the type of constructions under control were respected; there was always sufficient diversity among the public works under control, although local health units used different working methods. Impact on exposure and injuries: injury rates in the construction industry in Piedmont showed a decreasing trend and systematically lower values compared to national rates. Injury rates in the "roads and railways" sector showed an increasing trend owing to the great number of public works under construction. In this case, the effect of preventive measures seems less noticeable, but this mainly depends on methodological limits, such as mismatch between numerator and denominator, difficulties in estimating the number of workers actually present on the sites, underreporting of minor events. Despite the limitations of a retrospective analysis, the Piedmont safety inspection programme for the construction industry showed coherence with the objectives and had a positive impact on injury rates.

Thermographic inspection of pipes, tanks, and containment liners

NASA Astrophysics Data System (ADS)

Renshaw, Jeremy B.; Lhota, James R.; Muthu, Nathan; Shepard, Steven M.

2015-03-01

Nuclear power plants are required to operate at a high level of safety. Recent industry and license renewal commitments aim to further increase safety by requiring the inspection of components that have not traditionally undergone detailed inspected in the past, such as tanks and liners. NEI 09-14 requires the inspection of buried pipes and tanks while containment liner inspections are required as a part of license renewal commitments. Containment liner inspections must inspect the carbon steel liner for defects - such as corrosion - that could threaten the pressure boundary and ideally, should be able to inspect the surrounding concrete for foreign material that could be in contact with the steel liner and potentially initiate corrosion. Such an inspection requires a simultaneous evaluation of two materials with very different material properties. Rapid, yet detailed, inspection results are required due to the massive size of the tanks and containment liners to be inspected. For this reason, thermal NDE methods were evaluated to inspect tank and containment liner mockups with simulated defects. Thermographic Signal Reconstruction (TSR) was utilized to enhance the images and provide detailed information on the sizes and shapes of the observed defects. The results show that thermographic inspection is highly sensitive to the defects of interest and is capable of rapidly inspecting large areas.

32 CFR 310.43 - Privacy Act inspections.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 2 2013-07-01 2013-07-01 false Privacy Act inspections. 310.43 Section 310.43 National Defense Department of Defense (Continued) OFFICE OF THE SECRETARY OF DEFENSE (CONTINUED) PRIVACY PROGRAM DOD PRIVACY PROGRAM Inspections § 310.43 Privacy Act inspections. During internal inspections...

32 CFR 310.43 - Privacy Act inspections.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 32 National Defense 2 2014-07-01 2014-07-01 false Privacy Act inspections. 310.43 Section 310.43 National Defense Department of Defense (Continued) OFFICE OF THE SECRETARY OF DEFENSE (CONTINUED) PRIVACY PROGRAM DOD PRIVACY PROGRAM Inspections § 310.43 Privacy Act inspections. During internal inspections...

32 CFR 310.43 - Privacy Act inspections.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 2 2011-07-01 2011-07-01 false Privacy Act inspections. 310.43 Section 310.43 National Defense Department of Defense (Continued) OFFICE OF THE SECRETARY OF DEFENSE (CONTINUED) PRIVACY PROGRAM DOD PRIVACY PROGRAM Inspections § 310.43 Privacy Act inspections. During internal inspections...

32 CFR 310.43 - Privacy Act inspections.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 2 2012-07-01 2012-07-01 false Privacy Act inspections. 310.43 Section 310.43 National Defense Department of Defense (Continued) OFFICE OF THE SECRETARY OF DEFENSE (CONTINUED) PRIVACY PROGRAM DOD PRIVACY PROGRAM Inspections § 310.43 Privacy Act inspections. During internal inspections...

32 CFR 310.43 - Privacy Act inspections.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 2 2010-07-01 2010-07-01 false Privacy Act inspections. 310.43 Section 310.43 National Defense Department of Defense (Continued) OFFICE OF THE SECRETARY OF DEFENSE (CONTINUED) PRIVACY PROGRAM DOD PRIVACY PROGRAM Inspections § 310.43 Privacy Act inspections. During internal inspections...

A randomised controlled study to evaluate the effectiveness of targeted occupational health and safety consultation or inspection in Ontario manufacturing workplaces.

PubMed

Hogg-Johnson, Sheilah; Robson, Lynda; Cole, Donald C; Amick, Benjamin C; Tompa, Emile; Smith, Peter M; van Eerd, Dwayne; Mustard, Cameron

2012-12-01

From 2004 to 2008, the prevention system in Ontario, Canada ran the High Risk Firm Initiative, an injury-experience based targeted consultation or inspection programme. Our objective was to establish whether prevention system targeting of firms was effective in improving injury outcomes. Randomised controlled parallel groups. Population included all manufacturing firms registered with the Ontario Workplace Safety & Insurance Board in 2005. Firms ranked between the 2nd and 10th percentile on a composite measure of occupational health and safety performance were randomised to three study arms in 2006: targeted for Health & Safety Association (HSA) consultation, targeted for Ministry of Labour (MOL) inspection, or services as usual. Data included firm characteristics (sector, size, years in business, region, branches), work injury claims 2002-2008 and measures of consulting and inspecting activity. Negative binomial generalised estimating equations modelled claim and disability day rates by study arm and year, controlling for firm characteristics. Among 2153 firms, firm characteristics and 2002-2005 rates of work injury claims and disability days were similar across arms. Firm outcomes were significantly different from year to year, but study arm by year interactions were insignificant indicating similar trends for all three study arms. 83% of HSA targeted firms were contacted and 63% engaged while 75% of MOL targeted firms were inspected with orders written in 56%. Consultation and enforcement programmes as implemented were not sufficient to reduce work injury outcomes over 21 month follow-up. Lack of benefit could be due to non-specific firm selection methods, limited firm participation in interventions, low intervention intensity or insensitivity of available outcomes.

9 CFR 304.3 - Conditions for receiving inspection.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Conditions for receiving inspection. 304.3 Section 304.3 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION APPLICATION...

9 CFR 354.90 - Report of inspection work.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Report of inspection work. 354.90 Section 354.90 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE... Report of inspection work. Reports of the work of inspection carried on within official plants shall be...

Emerging challenges in public health protection, food safety and security: veterinary needs in the USDA's Food Safety and Inspection Service.

PubMed

Buntain, Bonnie J

2004-01-01

Meeting the needs of public service practice is a responsibility of the veterinary profession. The United States Department of Agriculture (USDA) Food Safety and Inspection Service (FSIS) has undergone significant change since 1996, when the final rule on Pathogen Reduction and Hazard Analysis and Critical Control Point (HACCP) Systems and its regulations were published in response to food-borne illnesses and deaths due to E. coli 0157:H7 in undercooked hamburgers. As a result, the role of the veterinarian is changing from a focus on carcass inspection (reactive) to scientific-based systems analysis and enforcement (preventive). With a large pool of veterinarians eligible to retire, a critical shortage of field veterinarians is predicted. The purpose of this article is to raise educators' awareness of this need, of the competencies required, and of the challenges and opportunities for veterinarians in the new public health-focused FSIS. An invitation to collaborate with the agency is offered to help meet emerging workforce requirements in public health practice.

SDDOT : safety program

DOT National Transportation Integrated Search

2000-05-01

The current safety and loss control program for the South Dakota Department of Transportation is not reaching its full potential and does not adequately prevent accidents and injuries. The Department has experienced an unacceptably high number of acc...

9 CFR 381.14 - Inspection concerning purportedly exempted operations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Inspection concerning purportedly exempted operations. 381.14 Section 381.14 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE... Inspection concerning purportedly exempted operations. Inspectors of the Inspection Service are authorized to...

9 CFR 306.2 - Program employees to have access to establishments.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Program employees to have access to establishments. 306.2 Section 306.2 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATIO...

9 CFR 306.2 - Program employees to have access to establishments.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Program employees to have access to establishments. 306.2 Section 306.2 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATIO...

9 CFR 306.2 - Program employees to have access to establishments.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Program employees to have access to establishments. 306.2 Section 306.2 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATIO...

FY 1991 safety program status report

NASA Technical Reports Server (NTRS)

1991-01-01

In FY 1991, the NASA Safety Division continued efforts to enhance the quality and productivity of its safety oversight function. Recent initiatives set forth in areas such as training, risk management, safety assurance, operational safety, and safety information systems have matured into viable programs contributing to the safety and success of activities throughout the Agency. Efforts continued to develop a centralized intra-agency safety training program with establishment of the NASA Safety Training Center at the Johnson Space Center (JSC). The objective is to provide quality training for NASA employees and contractors on a broad range of safety-related topics. Courses developed by the Training Center will be presented at various NASA locations to minimize travel and reach the greatest number of people at the least cost. In FY 1991, as part of the ongoing efforts to enhance the total quality of NASA's safety work force, the Safety Training Center initiated development of a Certified Safety Professional review course. This course provides a comprehensive review of the skills and knowledge that well-rounded safety professionals must possess to qualify for professional certification. FY 1992 will see the course presented to NASA and contractor employees at all installations via the NASA Video Teleconference System.

7 CFR 2.53 - Administrator, Food Safety and Inspection Service.

Code of Federal Regulations, 2014 CFR

2014-01-01

... certification of technical animal fat; certified products for dogs, cats and other carnivora; voluntary... agricultural sciences (7 U.S.C. 3318). (9) Conduct an education program regarding the availability and safety...

7 CFR 2.53 - Administrator, Food Safety and Inspection Service.

Code of Federal Regulations, 2011 CFR

2011-01-01

... certification of technical animal fat; certified products for dogs, cats and other carnivora; voluntary... agricultural sciences (7 U.S.C. 3318). (9) Conduct an education program regarding the availability and safety...

7 CFR 2.53 - Administrator, Food Safety and Inspection Service.

Code of Federal Regulations, 2010 CFR

2010-01-01

... certification of technical animal fat; certified products for dogs, cats and other carnivora; voluntary... agricultural sciences (7 U.S.C. 3318). (9) Conduct an education program regarding the availability and safety...

7 CFR 2.53 - Administrator, Food Safety and Inspection Service.

Code of Federal Regulations, 2012 CFR

2012-01-01

... certification of technical animal fat; certified products for dogs, cats and other carnivora; voluntary... agricultural sciences (7 U.S.C. 3318). (9) Conduct an education program regarding the availability and safety...

7 CFR 2.53 - Administrator, Food Safety and Inspection Service.

Code of Federal Regulations, 2013 CFR

2013-01-01

... certification of technical animal fat; certified products for dogs, cats and other carnivora; voluntary... agricultural sciences (7 U.S.C. 3318). (9) Conduct an education program regarding the availability and safety...

State funding of alcohol safety countermeasure programs

DOT National Transportation Integrated Search

1979-09-01

This study was to analyze current State practices in funding State alcohol highway safety programs. The results were intended to provide guidelines for establishing and improving self-sustaining alcohol safety programs. The literature was reviewed an...

NCRP Program Area Committee 2: Operational Radiation Safety

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pryor, Kathryn H.; Goldin, Eric M.

2016-02-29

Program Area Committee 2 of the National Council on Radiation Protection and Measurements provides guidance for radiation safety in occupational settings in a variety of industries and activities. The committee completed three reports in recent years covering recommendations for the development and administration of radiation safety programs for smaller educational institutions, requirements for self-assessment programs that improve radiation safety and identify and correct deficiencies, and a comprehensive process for effective investigation of radiological incidents. Ongoing work includes a report on sealed radioactive source controls and oversight of a report on radioactive nanomaterials focusing on gaps within current radiation safety programs.more » Future efforts may deal with operational radiation safety programs in fields such as the safe use of handheld and portable X-Ray fluorescence analyzers, occupational airborne radioactive contamination, unsealed radioactive sources, or industrial accelerators.« less

Thermographic inspection of pipes, tanks, and containment liners

DOE Office of Scientific and Technical Information (OSTI.GOV)

Renshaw, Jeremy B., E-mail: jrenshaw@epri.com; Muthu, Nathan; Lhota, James R.

2015-03-31

Nuclear power plants are required to operate at a high level of safety. Recent industry and license renewal commitments aim to further increase safety by requiring the inspection of components that have not traditionally undergone detailed inspected in the past, such as tanks and liners. NEI 09-14 requires the inspection of buried pipes and tanks while containment liner inspections are required as a part of license renewal commitments. Containment liner inspections must inspect the carbon steel liner for defects - such as corrosion - that could threaten the pressure boundary and ideally, should be able to inspect the surrounding concretemore » for foreign material that could be in contact with the steel liner and potentially initiate corrosion. Such an inspection requires a simultaneous evaluation of two materials with very different material properties. Rapid, yet detailed, inspection results are required due to the massive size of the tanks and containment liners to be inspected. For this reason, thermal NDE methods were evaluated to inspect tank and containment liner mockups with simulated defects. Thermographic Signal Reconstruction (TSR) was utilized to enhance the images and provide detailed information on the sizes and shapes of the observed defects. The results show that thermographic inspection is highly sensitive to the defects of interest and is capable of rapidly inspecting large areas.« less

The Department of Energy Nuclear Criticality Safety Program

NASA Astrophysics Data System (ADS)

Felty, James R.

2005-05-01

This paper broadly covers key events and activities from which the Department of Energy Nuclear Criticality Safety Program (NCSP) evolved. The NCSP maintains fundamental infrastructure that supports operational criticality safety programs. This infrastructure includes continued development and maintenance of key calculational tools, differential and integral data measurements, benchmark compilation, development of training resources, hands-on training, and web-based systems to enhance information preservation and dissemination. The NCSP was initiated in response to Defense Nuclear Facilities Safety Board Recommendation 97-2, Criticality Safety, and evolved from a predecessor program, the Nuclear Criticality Predictability Program, that was initiated in response to Defense Nuclear Facilities Safety Board Recommendation 93-2, The Need for Critical Experiment Capability. This paper also discusses the role Dr. Sol Pearlstein played in helping the Department of Energy lay the foundation for a robust and enduring criticality safety infrastructure.

49 CFR 237.111 - Review of bridge inspection reports.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Review of bridge inspection reports. 237.111... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION BRIDGE SAFETY STANDARDS Bridge Inspection § 237.111 Review of bridge inspection reports. Bridge inspection reports shall be reviewed by railroad bridge supervisors and railroad...

49 CFR 237.111 - Review of bridge inspection reports.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Review of bridge inspection reports. 237.111... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION BRIDGE SAFETY STANDARDS Bridge Inspection § 237.111 Review of bridge inspection reports. Bridge inspection reports shall be reviewed by railroad bridge supervisors and railroad...

47 CFR 95.1129 - Station inspection.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 5 2012-10-01 2012-10-01 false Station inspection. 95.1129 Section 95.1129 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PERSONAL RADIO SERVICES Wireless Medical Telemetry Service (WMTS) General Provisions § 95.1129 Station inspection. All...

47 CFR 80.903 - Inspection of radiotelephone installation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ship passes the inspection, the technician will issue a Communications Act Safety Radiotelephony... 47 Telecommunication 5 2010-10-01 2010-10-01 false Inspection of radiotelephone installation. 80... Passenger Boats § 80.903 Inspection of radiotelephone installation. Every vessel subject to Part III of...

49 CFR 215.13 - Pre-departure inspection.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., DEPARTMENT OF TRANSPORTATION RAILROAD FREIGHT CAR SAFETY STANDARDS General § 215.13 Pre-departure inspection. (a) At each location where a freight car is placed in a train, the freight car shall be inspected before the train departs. This inspection may be made before or after the car is placed in the train. (b...

49 CFR 215.13 - Pre-departure inspection.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., DEPARTMENT OF TRANSPORTATION RAILROAD FREIGHT CAR SAFETY STANDARDS General § 215.13 Pre-departure inspection. (a) At each location where a freight car is placed in a train, the freight car shall be inspected before the train departs. This inspection may be made before or after the car is placed in the train. (b...

49 CFR 215.13 - Pre-departure inspection.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., DEPARTMENT OF TRANSPORTATION RAILROAD FREIGHT CAR SAFETY STANDARDS General § 215.13 Pre-departure inspection. (a) At each location where a freight car is placed in a train, the freight car shall be inspected before the train departs. This inspection may be made before or after the car is placed in the train. (b...

49 CFR 215.13 - Pre-departure inspection.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., DEPARTMENT OF TRANSPORTATION RAILROAD FREIGHT CAR SAFETY STANDARDS General § 215.13 Pre-departure inspection. (a) At each location where a freight car is placed in a train, the freight car shall be inspected before the train departs. This inspection may be made before or after the car is placed in the train. (b...

49 CFR 215.13 - Pre-departure inspection.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., DEPARTMENT OF TRANSPORTATION RAILROAD FREIGHT CAR SAFETY STANDARDS General § 215.13 Pre-departure inspection. (a) At each location where a freight car is placed in a train, the freight car shall be inspected before the train departs. This inspection may be made before or after the car is placed in the train. (b...

FMCSA safety program effectiveness measurement : Roadside Intervention Effectiveness Model, fiscal year 2012.

DOT National Transportation Integrated Search

2016-02-01

The Federal Motor Carrier Safety Administration (FMCSA), in cooperation with the John A. Volpe National : Transportation Systems Center, has developed an analytic model to measure the effectiveness of roadside : inspections and traffic enforcements i...

Health and safety programs for art and theater schools.

PubMed

McCann, M

2001-01-01

A wide variety of health and safety hazards exist in schools and colleges of art and theater due to a lack of formal health and safety programs and a failure to include health and safety concerns during planning of new facilities and renovation of existing facilities. This chapter discusses the elements of a health and safety program as well as safety-related structural and equipment needs that should be in the plans for any school of art or theater. These elements include curriculum content, ventilation, storage, housekeeping, waste management, fire and explosion prevention, machine and tool safety, electrical safety, noise, heat stress, and life safety and emergency procedures and equipment. Ideally, these elements should be incorporated into the plans for any new facilities, but ongoing programs can also benefit from a review of existing health and safety programs.

Ground Beef and Food Safety

MedlinePlus

... Forms Standard Forms FSIS United States Department of Agriculture Food Safety and Inspection Service About FSIS District ... must be federally inspected. The U.S. Department of Agriculture's (USDA) Food Safety and Inspection Service (FSIS) carries ...

9 CFR 381.14 - Inspection concerning purportedly exempted operations.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Inspection concerning purportedly exempted operations. 381.14 Section 381.14 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND...

Fusion Safety Program annual report, fiscal year 1994

NASA Astrophysics Data System (ADS)

Longhurst, Glen R.; Cadwallader, Lee C.; Dolan, Thomas J.; Herring, J. Stephen; McCarthy, Kathryn A.; Merrill, Brad J.; Motloch, Chester C.; Petti, David A.

1995-03-01

This report summarizes the major activities of the Fusion Safety Program in fiscal year 1994. The Idaho National Engineering Laboratory (INEL) is the designated lead laboratory and Lockheed Idaho Technologies Company is the prime contractor for this program. The Fusion Safety Program was initiated in 1979. Activities are conducted at the INEL, at other DOE laboratories, and at other institutions, including the University of Wisconsin. The technical areas covered in this report include tritium safety, beryllium safety, chemical reactions and activation product release, safety aspects of fusion magnet systems, plasma disruptions, risk assessment failure rate data base development, and thermalhydraulics code development and their application to fusion safety issues. Much of this work has been done in support of the International Thermonuclear Experimental Reactor (ITER). Also included in the report are summaries of the safety and environmental studies performed by the Fusion Safety Program for the Tokamak Physics Experiment and the Tokamak Fusion Test Reactor and of the technical support for commercial fusion facility conceptual design studies. A major activity this year has been work to develop a DOE Technical Standard for the safety of fusion test facilities.

47 CFR 95.1007 - Station inspection.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Station inspection. 95.1007 Section 95.1007 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PERSONAL RADIO SERVICES Low Power Radio Service (LPRS) General Provisions § 95.1007 Station inspection. All LPRS system...

47 CFR 101.201 - Station inspection.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 5 2011-10-01 2011-10-01 false Station inspection. 101.201 Section 101.201 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Operational Requirements § 101.201 Station inspection. The licensee of each station authorized in...

47 CFR 101.201 - Station inspection.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 5 2012-10-01 2012-10-01 false Station inspection. 101.201 Section 101.201 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Operational Requirements § 101.201 Station inspection. The licensee of each station authorized in...

47 CFR 101.201 - Station inspection.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Station inspection. 101.201 Section 101.201 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Operational Requirements § 101.201 Station inspection. The licensee of each station authorized in...

47 CFR 101.201 - Station inspection.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 5 2013-10-01 2013-10-01 false Station inspection. 101.201 Section 101.201 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Operational Requirements § 101.201 Station inspection. The licensee of each station authorized in...

47 CFR 101.201 - Station inspection.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 5 2014-10-01 2014-10-01 false Station inspection. 101.201 Section 101.201 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Operational Requirements § 101.201 Station inspection. The licensee of each station authorized in...

National child safety seat distribution program evaluation

DOT National Transportation Integrated Search

1999-03-01

The National Child Safety Seat Distribution Program (NCSS) was a multi-year, multi-phase program intended to distribute $8 million in child safety seats to low-income and special needs children in all fifty states. Non-profit organizations that recei...

FMCSA safety program effectiveness measurement : Roadside Intervention Effectiveness Model, fiscal year 2010.

DOT National Transportation Integrated Search

2014-11-01

The Federal Motor Carrier Safety Administration (FMCSA), in cooperation with the John A. Volpe National Transportation Systems Center, has developed an analytic model to measure the effectiveness of roadside inspections and traffic enforcements in te...

FMCSA safety program effectiveness measurement : roadside intervention effectiveness model, fiscal year 2013.

DOT National Transportation Integrated Search

2017-08-01

The Federal Motor Carrier Safety Administration (FMCSA), in cooperation with the John A. Volpe National Transportation Systems Center, has developed an analytic model to measure the effectiveness of roadside inspections and traffic enforcements in te...

FMCSA safety program effectiveness measurement : roadside intervention effectiveness model fiscal year 2011.

DOT National Transportation Integrated Search

2015-06-01

The Federal Motor Carrier Safety Administration (FMCSA), in cooperation with the John A. Volpe National Transportation Systems Center, has developed an analytic model to measure the effectiveness of roadside inspections and traffic enforcements in te...

9 CFR 327.12 - Foreign canned or packaged products bearing trade labels; sampling and inspection.

Code of Federal Regulations, 2010 CFR

2010-01-01

... SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY... approved under § 317.3 of this subchapter shall be collected and forwarded to the laboratory by the Program inspector for examination, and the products shall be held pending receipt of the report of the laboratory...

Laser safety programs in general surgery.

PubMed

Lanzafame, R J

1994-06-01

General surgery represents a speciality where, while any procedure can be performed with lasers, there are no procedures for which the laser is the sine quo non. The general surgeon may perform a variety of procedures with a multitude of laser wavelengths and technologies. Laser safety in general surgery requires a multidisciplinary approach. Effective laser safety requires the oversight of the hospital's "laser usage committee" and "laser safety officer" while providing a workable framework for daily laser use in a variety of clinical scenarios simultaneously. This framework must be user-friendly rather than oppressive. This presentation will describe laser safety at the Rochester General Hospital, a tertiary care, community-based teaching hospital. The safety program incorporates the following components: input to physician credentialing and training, education and in-servicing of nursing and technical personnel, equipment purchase and maintenance, quality assurance, and safety monitoring. The University of Rochester general surgery residency training program mandates laser training during the PGY-2 year. This program stresses the safe use of lasers and provides the basis for graded hands-on experience during the surgical residency. The greatest challenge for laser safety in general surgery centers on the burgeoning field of minimally invasive surgery. Safety assurance must be balanced so as to maintain a safe operating-room environment while ensuring patient safety and the ability to permit the surgery to proceed efficiently. Safety measures for laparoscopic procedures must be sensitive to the needs of the surgical team while not providing confusing signals for the "gallery" observers. This task is critical for the safe operation of lasers in general surgery. Effective laser safety in general surgery requires constant vigilance tempered with sensitivity to the needs of the surgeon and the patient as laser technology and its applications continue to evolve.

76 FR 22944 - Pipeline Safety: Notice of Public Webinars on Implementation of Distribution Integrity Management...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-25

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket ID... Management Programs AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION... Nation's gas distribution pipeline systems through development of inspection methods and guidance for the...

A Longitudinal Study to Assess the Role of Sanitary Inspections in Improving the Hygiene and Food Safety of Eating Establishments in a Tertiary Care Hospital of North India

PubMed Central

Dudeja, Puja; Singh, Amarjeet

2017-01-01

Introduction: Food safety inspections serve two purposes; determine compliance with the law and gather evidence for enforcement if there is noncompliance. The present study was conducted to assess the role of regular inspections on food safety in hospital premises. Methodology: This was an intervention based before and after study. A tool was prepared based on the Food Safety and Standards Regulations (FSSR) (in India) 2011. This included major, critical, and highly critical domains. Each item in the tool scored between 1 and 3 (poor, satisfactory, and good). Based on this, each eating establishment (EE) was given a score on conformance to FSSR 2011. Monthly inspection was made over a year and corrective actions were suggested. Results: The minimum preintervention score was (41.28%), and maximum was (77.25%). There was no significant association between type of meal services and score EE (P > 0.05). Higher proportion of EEs within the hospital building had a satisfactory and good score as compared to EEs outside the hospital building but within hospital premises (P < 0.05). Postintervention, there was a significant change (increase) in the scores of EEs. There was a significant increase in mean scores of EEs under major domains namely maintenance, layout of equipment, monitoring an detection, and elimination of food sources to the pests. Under critical and highly critical domains personal cleanliness, training, and self-inspection by food business operators improved significantly. Conclusion: Regular inspections can improve the food safety standards in EEs. PMID:29184325

A Longitudinal Study to Assess the Role of Sanitary Inspections in Improving the Hygiene and Food Safety of Eating Establishments in a Tertiary Care Hospital of North India.

PubMed

Dudeja, Puja; Singh, Amarjeet

2017-01-01

Food safety inspections serve two purposes; determine compliance with the law and gather evidence for enforcement if there is noncompliance. The present study was conducted to assess the role of regular inspections on food safety in hospital premises. This was an intervention based before and after study. A tool was prepared based on the Food Safety and Standards Regulations (FSSR) (in India) 2011. This included major, critical, and highly critical domains. Each item in the tool scored between 1 and 3 (poor, satisfactory, and good). Based on this, each eating establishment (EE) was given a score on conformance to FSSR 2011. Monthly inspection was made over a year and corrective actions were suggested. The minimum preintervention score was (41.28%), and maximum was (77.25%). There was no significant association between type of meal services and score EE ( P > 0.05). Higher proportion of EEs within the hospital building had a satisfactory and good score as compared to EEs outside the hospital building but within hospital premises ( P < 0.05). Postintervention, there was a significant change (increase) in the scores of EEs. There was a significant increase in mean scores of EEs under major domains namely maintenance, layout of equipment, monitoring an detection, and elimination of food sources to the pests. Under critical and highly critical domains personal cleanliness, training, and self-inspection by food business operators improved significantly. Regular inspections can improve the food safety standards in EEs.

9 CFR 303.2 - Experimentation: Intensity of inspection coverage.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Experimentation: Intensity of inspection coverage. 303.2 Section 303.2 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION...

9 CFR 303.2 - Experimentation: Intensity of inspection coverage.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Experimentation: Intensity of inspection coverage. 303.2 Section 303.2 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION...

9 CFR 303.2 - Experimentation: Intensity of inspection coverage.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Experimentation: Intensity of inspection coverage. 303.2 Section 303.2 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION...

National Dam Safety Program. Cedar Hill Lake Number 2 and Number 3 Dams (MO 30005) and (MO 31020), Mississippi - Kaskaskia - St. Louis Basin, Jefferson County, Missouri. Phase I Inspection Report.

DTIC Science & Technology

1979-01-01

ST. LOUIS I3ASIN ’ADA l1047 82 -3 CEDAR HILL LAKE NO. 2 AND NO. 5 DAMS 5JEFFERSON COUNTY, MISSOURI SMO 30005 AND MO 31020% SPHASE I INSPECTION REPORT...and Number 3 17. DISTRIBUTION STATEMENT (of the abstraect Un ((NO 30005 and MO 31020),, Mississippi - Kaskaskia - St. Louis i ,-_Basin, Jefferson County...results of field inspection and evaluation of Cedar Hill No. 2 and No. 3 Dams (Mo. 30005 and 31020). It was prepared under the National Program of

49 CFR 195.206 - Material inspection.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 3 2011-10-01 2011-10-01 false Material inspection. 195.206 Section 195.206 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... PIPELINE Construction § 195.206 Material inspection. No pipe or other component may be installed in a...

49 CFR 195.206 - Material inspection.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 3 2010-10-01 2010-10-01 false Material inspection. 195.206 Section 195.206 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... PIPELINE Construction § 195.206 Material inspection. No pipe or other component may be installed in a...

49 CFR 195.206 - Material inspection.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 3 2013-10-01 2013-10-01 false Material inspection. 195.206 Section 195.206 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... PIPELINE Construction § 195.206 Material inspection. No pipe or other component may be installed in a...

49 CFR 659.15 - System safety program standard.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false System safety program standard. 659.15 Section 659... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the State Oversight Agency § 659.15 System safety program standard. (a) General requirement. Each state...

[A report on the inspection of the Shinkansen Multiple Inspection Train].

PubMed

Niijima, Kuniyuki; Enta, Kazuhiko; Sashihara, Shunsuke

2003-03-01

The multiple inspection train nicknamed "Doctor Yellow" is capable of taking necessary measurements of the track and electrical facilities, and maintains the safety and reliability of the Tokaido Shinkansen corridor. We performed a workplace inspection to examine environmental conditions in this train. The workers were engaged in VDT (visual display terminal) work including the inspection task. The labor environments such as vibration, noise, temperature and lighting, were comfortable. However, some of the working conditions while the Bullet train is running are inevitably restricted. The occupational physicians of the Central Japan Railway Company are expected to play important roles in providing effective health management for the employees under the characteristic work environments on the railroad.

75 FR 73946 - Worker Safety and Health Program: Safety Conscious Work Environment

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-30

... DEPARTMENT OF ENERGY 10 CFR Part 851 Worker Safety and Health Program: Safety Conscious Work... Nuclear Regulatory Commission's ``Safety-Conscious Work Environment'' guidelines as a model. DOE published.... Second, not only would instituting a ``Safety-Conscious Work Environment'' by regulation be redundant...

Using Contemporary Leadership Skills in Medication Safety Programs.

PubMed

Hertig, John B; Hultgren, Kyle E; Weber, Robert J

2016-04-01

The discipline of studying medication errors and implementing medication safety programs in hospitals dates to the 1970s. These initial programs to prevent errors focused only on pharmacy operation changes - and not the broad medication use system. In the late 1990s, research showed that faulty systems, and not faulty people, are responsible for errors and require a multidisciplinary approach. The 2013 ASHP Statement on the Role of the Medication Safety Leader recommended that medication safety leaders be integrated team members rather than a single point of contact. Successful medication safety programs must employ a new approach - one that embraces the skills of all health care team members and positions many leaders to improve safety. This approach requires a new set of leadership skills based on contemporary management principles, including followership, team-building, tracking and assessing progress, storytelling and communication, and cultivating innovation, all of which promote transformational change. The application of these skills in developing or changing a medication safety program is reviewed in this article.

49 CFR 659.15 - System safety program standard.

Code of Federal Regulations, 2011 CFR

2011-10-01

... included in the affected rail transit agency's system safety program plan relating to the hazard management... 49 Transportation 7 2011-10-01 2011-10-01 false System safety program standard. 659.15 Section 659... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the...

Administering Safety: Challenge Courses and Climbing Walls.

ERIC Educational Resources Information Center

Evans, Will

1996-01-01

A camp that is establishing a challenge course or climbing wall must ensure program safety. Discusses financial planning, selecting a contractor, adhering to standards for construction, inspections, staff training, screening of participants, and the administrative challenge of implementing and documenting proper actions. Sidebar discusses a study…

9 CFR 381.197 - Imported products; foreign inspection certificates required.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS Imported Poultry... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Imported products; foreign inspection certificates required. 381.197 Section 381.197 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE...

National Program for Inspection of Non-Federal Dams. Chase Pond Dam (NH 00255), NHWRB Number 253.02, Merrimack River Basin, Wilmot, New Hampshire. Phase I Inspection Report.

DTIC Science & Technology

1980-03-01

STANDAROS-1963-A L ~.°.. o...... 1....MERRIMACK RIVER BASIN -!. WILMOT , NEW HAMPSHIRE ’,- CHASE POND DAM NH 00255 NHWRB NO. 253.02 r PHASE I...Continue on fewsorsp side #0 .o..oemay and Ientify by black Muthot) - DAMS, NSPECTION, PAM S’AFETY, Merrimack River Basin. * Wilmot , New Hampshire...MERRIMACK RIVER BASIN R WILMOT , NEW HAMPSHIRE - - PHASE I INSPECTION REPORT NATIONAL DAM INSPECTION PROGRAM :: : I

49 CFR 193.2623 - Inspecting LNG storage tanks.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 3 2013-10-01 2013-10-01 false Inspecting LNG storage tanks. 193.2623 Section 193... GAS FACILITIES: FEDERAL SAFETY STANDARDS Maintenance § 193.2623 Inspecting LNG storage tanks. Each LNG storage tank must be inspected or tested to verify that each of the following conditions does not impair...

49 CFR 193.2623 - Inspecting LNG storage tanks.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 3 2012-10-01 2012-10-01 false Inspecting LNG storage tanks. 193.2623 Section 193... GAS FACILITIES: FEDERAL SAFETY STANDARDS Maintenance § 193.2623 Inspecting LNG storage tanks. Each LNG storage tank must be inspected or tested to verify that each of the following conditions does not impair...

49 CFR 193.2623 - Inspecting LNG storage tanks.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 3 2014-10-01 2014-10-01 false Inspecting LNG storage tanks. 193.2623 Section 193... GAS FACILITIES: FEDERAL SAFETY STANDARDS Maintenance § 193.2623 Inspecting LNG storage tanks. Each LNG storage tank must be inspected or tested to verify that each of the following conditions does not impair...

Potential advantages associated with implementing a risk-based inspection program by a nuclear facility

NASA Astrophysics Data System (ADS)

McNeill, Alexander, III; Balkey, Kenneth R.

1995-05-01

The current inservice inspection activities at a U.S. nuclear facility are based upon the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, Section XI. The Code selects examination locations based upon a sampling criteria which includes component geometry, stress, and usage among other criteria. This can result in a significant number of required examinations. As a result of regulatory action each nuclear facility has conducted probabilistic risk assessments (PRA) or individual plant examinations (IPE), producing plant specific risk-based information. Several initiatives have been introduced to apply this new plant risk information. Among these initiatives is risk-based inservice inspection. A code case has been introduced for piping inspections based upon this new risk- based technology. This effort brought forward to the ASME Section XI Code committee, has been initiated and championed by the ASME Research Task Force on Risk-Based Inspection Guidelines -- LWR Nuclear Power Plant Application. Preliminary assessments associated with the code case have revealed that potential advantages exist in a risk-based inservice inspection program with regard to a number of exams, risk, personnel exposure, and cost.

Medication safety programs in primary care: a scoping review.

PubMed

Khalil, Hanan; Shahid, Monica; Roughead, Libby

2017-10-01

Medication safety plays an essential role in all healthcare organizations; improving this area is paramount to quality and safety of any wider healthcare program. While several medication safety programs in the hospital setting have been described and the associated impact on patient safety evaluated, no systematic reviews have described the impact of medication safety programs in the primary care setting. A preliminary search of the literature demonstrated that no systematic reviews, meta-analysis or scoping reviews have reported on medication safety programs in primary care; instead they have focused on specific interventions such as medication reconciliation or computerized physician order entry. This scoping review sought to map the current medication safety programs used in primary care. The current scoping review sought to examine the characteristics of medication safety programs in the primary care setting and to map evidence on the outcome measures used to assess the effectiveness of medication safety programs in improving patient safety. The current review considered participants of any age and any condition using care obtained from any primary care services. We considered studies that focussed on the characteristics of medication safety programs and the outcome measures used to measure the effectiveness of these programs on patient safety in the primary care setting. The context of this review was primary care settings, primary healthcare organizations, general practitioner clinics, outpatient clinics and any other clinics that do not classify patients as inpatients. We considered all quantitative studied published in English. A three-step search strategy was utilized in this review. Data were extracted from the included studies to address the review question. The data extracted included type of medication safety program, author, country of origin, aims and purpose of the study, study population, method, comparator, context, main findings and outcome

Annual Radioactive Waste Tank Inspection Program 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

McNatt, F.G. Sr.

1995-04-01

Aqueous radioactive wastes from Savannah River Site (SRS) separations processes are contained in large underground carbon steel tanks. Inspections made during 1994 to evaluate these vessels and evaluations based on data accrued by inspections made since the tanks were constructed are the subject of this report.

7 CFR 1948.91 - Inspections of development.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 13 2011-01-01 2009-01-01 true Inspections of development. 1948.91 Section 1948.91...) PROGRAM REGULATIONS (CONTINUED) RURAL DEVELOPMENT Section 601 Energy Impacted Area Development Assistance Program § 1948.91 Inspections of development. Inspections will be made by the FmHA or its successor agency...

Automated track video inspection pilot project.

DOT National Transportation Integrated Search

2013-09-01

This project had two main objectives. The first was to improve the safety of transit workers, specifically right-of-way safety for rail transit : workers through demonstration of advanced track inspection techniques that limit the inspectors expos...

49 CFR 659.19 - System safety program plan: contents.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 7 2012-10-01 2012-10-01 false System safety program plan: contents. 659.19... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the State Oversight Agency § 659.19 System safety program plan: contents. The system safety plan shall...

49 CFR 659.19 - System safety program plan: contents.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 7 2011-10-01 2011-10-01 false System safety program plan: contents. 659.19... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the State Oversight Agency § 659.19 System safety program plan: contents. The system safety plan shall...

49 CFR 659.19 - System safety program plan: contents.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 7 2013-10-01 2013-10-01 false System safety program plan: contents. 659.19... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the State Oversight Agency § 659.19 System safety program plan: contents. The system safety plan shall...

49 CFR 659.19 - System safety program plan: contents.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 7 2014-10-01 2014-10-01 false System safety program plan: contents. 659.19... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the State Oversight Agency § 659.19 System safety program plan: contents. The system safety plan shall...

49 CFR 659.19 - System safety program plan: contents.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false System safety program plan: contents. 659.19... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the State Oversight Agency § 659.19 System safety program plan: contents. The system safety plan shall...

77 FR 4407 - Modernization of Poultry Slaughter Inspection

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-27

...The Food Safety and Inspection Service (FSIS) is proposing a new inspection system for young chicken and turkey slaughter establishments that would replace the current Streamlined Inspection System (SIS), the New Line Speed Inspection System (NELS), and the New Turkey Inspection System (NTIS). The Agency is also proposing several changes that would affect all establishments that slaughter poultry other than ratites, regardless of the inspection system under which they operate. This proposed rule is a result of the Agency's 2011 regulatory review efforts conducted under Executive Order 13563 on Improving Regulation and Regulatory Review.

ANNUAL RADIOACTIVE WASTE TANK INSPECTION PROGRAM 2008

DOE Office of Scientific and Technical Information (OSTI.GOV)

West, B.; Waltz, R.

2009-06-11

Aqueous radioactive wastes from Savannah River Site (SRS) separations and vitrification processes are contained in large underground carbon steel tanks. Inspections made during 2008 to evaluate these vessels and other waste handling facilities along with evaluations based on data from previous inspections are the subject of this report.

Occupational Safety and Health Programs in Career Education.

ERIC Educational Resources Information Center

DiCarlo, Robert D.; And Others

This resource guide was developed in response to the Occupational Safety and Health Act of 1970 and is intended to assist teachers in implementing courses in occupational safety and health as part of a career education program. The material is a synthesis of films, programed instruction, slides and narration, case studies, safety pamphlets,…

Using Contemporary Leadership Skills in Medication Safety Programs

PubMed Central

Hertig, John B.; Hultgren, Kyle E.; Weber, Robert J.

2016-01-01

The discipline of studying medication errors and implementing medication safety programs in hospitals dates to the 1970s. These initial programs to prevent errors focused only on pharmacy operation changes – and not the broad medication use system. In the late 1990s, research showed that faulty systems, and not faulty people, are responsible for errors and require a multidisciplinary approach. The 2013 ASHP Statement on the Role of the Medication Safety Leader recommended that medication safety leaders be integrated team members rather than a single point of contact. Successful medication safety programs must employ a new approach – one that embraces the skills of all health care team members and positions many leaders to improve safety. This approach requires a new set of leadership skills based on contemporary management principles, including followership, team-building, tracking and assessing progress, storytelling and communication, and cultivating innovation, all of which promote transformational change. The application of these skills in developing or changing a medication safety program is reviewed in this article. PMID:27303083

OSHA Training Programs. Module SH-48. Safety and Health.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on OSHA (Occupational Safety and Health Act) training programs is one of 50 modules concerned with job safety and health. This module provides a list of OSHA training requirements and describes OSHA training programs and other safety organizations' programs. Following the introduction, 11 objectives (each keyed to a page in the…

9 CFR 354.123 - Segregation of suspects on ante-mortem inspection.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Segregation of suspects on ante-mortem inspection. 354.123 Section 354.123 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE... Inspection Procedures; Ante-Mortem Inspections § 354.123 Segregation of suspects on ante-mortem inspection...

9 CFR 354.123 - Segregation of suspects on ante-mortem inspection.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Segregation of suspects on ante-mortem inspection. 354.123 Section 354.123 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE... Inspection Procedures; Ante-Mortem Inspections § 354.123 Segregation of suspects on ante-mortem inspection...

30 CFR 75.1101-11 - Inspection of water sprinkler systems.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Inspection of water sprinkler systems. 75.1101... COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Fire Protection § 75.1101-11 Inspection of water sprinkler systems. Each water sprinkler system shall be examined weekly and a...

30 CFR 75.1101-11 - Inspection of water sprinkler systems.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Inspection of water sprinkler systems. 75.1101... COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Fire Protection § 75.1101-11 Inspection of water sprinkler systems. Each water sprinkler system shall be examined weekly and a...

30 CFR 75.1101-11 - Inspection of water sprinkler systems.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Inspection of water sprinkler systems. 75.1101... COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Fire Protection § 75.1101-11 Inspection of water sprinkler systems. Each water sprinkler system shall be examined weekly and a...

30 CFR 75.1101-11 - Inspection of water sprinkler systems.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Inspection of water sprinkler systems. 75.1101... COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Fire Protection § 75.1101-11 Inspection of water sprinkler systems. Each water sprinkler system shall be examined weekly and a...

30 CFR 75.1101-11 - Inspection of water sprinkler systems.