14 CFR 417.233 - Analysis for an unguided suborbital launch vehicle flown with a wind weighting safety system.

Code of Federal Regulations, 2013 CFR

2013-01-01

... vehicle flown with a wind weighting safety system. 417.233 Section 417.233 Aeronautics and Space... with a wind weighting safety system. For each launch of an unguided suborbital launch vehicle flown with a wind weighting safety system, in addition to the other requirements in this subpart outlined in...

14 CFR 417.233 - Analysis for an unguided suborbital launch vehicle flown with a wind weighting safety system.

Code of Federal Regulations, 2014 CFR

2014-01-01

... vehicle flown with a wind weighting safety system. 417.233 Section 417.233 Aeronautics and Space... with a wind weighting safety system. For each launch of an unguided suborbital launch vehicle flown with a wind weighting safety system, in addition to the other requirements in this subpart outlined in...

14 CFR 417.233 - Analysis for an unguided suborbital launch vehicle flown with a wind weighting safety system.

Code of Federal Regulations, 2011 CFR

2011-01-01

... vehicle flown with a wind weighting safety system. 417.233 Section 417.233 Aeronautics and Space... with a wind weighting safety system. For each launch of an unguided suborbital launch vehicle flown with a wind weighting safety system, in addition to the other requirements in this subpart outlined in...

14 CFR 417.233 - Analysis for an unguided suborbital launch vehicle flown with a wind weighting safety system.

Code of Federal Regulations, 2010 CFR

2010-01-01

... vehicle flown with a wind weighting safety system. 417.233 Section 417.233 Aeronautics and Space... with a wind weighting safety system. For each launch of an unguided suborbital launch vehicle flown with a wind weighting safety system, in addition to the other requirements in this subpart outlined in...

Safety and Suitability for Service Assessment Testing for Aircraft Launched Munitions

DTIC Science & Technology

2013-07-01

2013 12 benefits in terms of cost and test efficiency that tend to associate the Analytical S3 Test Approach with complex missile systems and the... systems containing expensive, non-safety related components. c. When using the Analytical S3 Test Approach for aircraft launched bombs, full BTCA is...establish safety margin of the system . Details of the Empirical Test Flow with full and reduced BTCA options are provided in Appendix B, Annexes 3 and

Design for Reliability and Safety Approach for the New NASA Launch Vehicle

NASA Technical Reports Server (NTRS)

Safie, Fayssal M.; Weldon, Danny M.

2007-01-01

The United States National Aeronautics and Space Administration (NASA) is in the midst of a space exploration program intended for sending crew and cargo to the international Space Station (ISS), to the moon, and beyond. This program is called Constellation. As part of the Constellation program, NASA is developing new launch vehicles aimed at significantly increase safety and reliability, reduce the cost of accessing space, and provide a growth path for manned space exploration. Achieving these goals requires a rigorous process that addresses reliability, safety, and cost upfront and throughout all the phases of the life cycle of the program. This paper discusses the "Design for Reliability and Safety" approach for the NASA new launch vehicles, the ARES I and ARES V. Specifically, the paper addresses the use of an integrated probabilistic functional analysis to support the design analysis cycle and a probabilistic risk assessment (PRA) to support the preliminary design and beyond.

14 CFR 417.103 - Safety organization.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Safety organization. 417.103 Section 417... OF TRANSPORTATION LICENSING LAUNCH SAFETY Launch Safety Responsibilities § 417.103 Safety organization. (a) A launch operator must maintain and document a safety organization. A launch operator must...

Nuclear safety

NASA Technical Reports Server (NTRS)

Buden, D.

1991-01-01

Topics dealing with nuclear safety are addressed which include the following: general safety requirements; safety design requirements; terrestrial safety; SP-100 Flight System key safety requirements; potential mission accidents and hazards; key safety features; ground operations; launch operations; flight operations; disposal; safety concerns; licensing; the nuclear engine for rocket vehicle application (NERVA) design philosophy; the NERVA flight safety program; and the NERVA safety plan.

14 CFR Appendix A to Part 417 - Flight Safety Analysis Methodologies and Products for a Launch Vehicle Flown With a Flight Safety...

Code of Federal Regulations, 2013 CFR

2013-01-01

... approach provides an equivalent level of safety. If a Federal launch range performs the launch operator's... FAA will measure any proposed alternative analysis approach. This appendix also identifies the... control systems; (ix) Steering misalignment; and (x) Winds. (2) Each three-sigma trajectory must account...

14 CFR Appendix A to Part 417 - Flight Safety Analysis Methodologies and Products for a Launch Vehicle Flown With a Flight Safety...

Code of Federal Regulations, 2012 CFR

2012-01-01

... approach provides an equivalent level of safety. If a Federal launch range performs the launch operator's... FAA will measure any proposed alternative analysis approach. This appendix also identifies the... control systems; (ix) Steering misalignment; and (x) Winds. (2) Each three-sigma trajectory must account...

14 CFR Appendix A to Part 417 - Flight Safety Analysis Methodologies and Products for a Launch Vehicle Flown With a Flight Safety...

Code of Federal Regulations, 2010 CFR

2010-01-01

... approach provides an equivalent level of safety. If a Federal launch range performs the launch operator's... FAA will measure any proposed alternative analysis approach. This appendix also identifies the... control systems; (ix) Steering misalignment; and (x) Winds. (2) Each three-sigma trajectory must account...

14 CFR Appendix A to Part 417 - Flight Safety Analysis Methodologies and Products for a Launch Vehicle Flown With a Flight Safety...

Code of Federal Regulations, 2014 CFR

2014-01-01

... approach provides an equivalent level of safety. If a Federal launch range performs the launch operator's... FAA will measure any proposed alternative analysis approach. This appendix also identifies the... control systems; (ix) Steering misalignment; and (x) Winds. (2) Each three-sigma trajectory must account...

Public Safety Standards for the Launch and Entry of Spacecraft

NASA Astrophysics Data System (ADS)

Wilde, Paul; Van Suetendael, Richard; Hallock, James; Larson, Erik

2005-12-01

This paper describes elements of the US government's response to the Space Shuttle Columbia accident and other actions recently taken, relevant to public safety during launch and entry of spacecraft. The Columbia accident generated numerous debris impacts capable of causing public harm, including major property damage as well as serious injury to members of the public on the ground, in aircraft, and on waterborne vessels. The Columbia Accident Investigation Board (CAIB) commissioned an analysis by ACTA Inc. that found the lack of reported casualties on the ground was a reasonably expected result based on the recovered debris data, census data, and mathematical methods consistent with current standards for launch debris risk analyses. [1, 2] A more detailed aircraft risk analysis, funded by the Federal Aviation Administration (FAA), used the actual records of aircraft activity at the time of the accident, and found that the probability of an impact by Columbia debris to commercial aircraft in the vicinity was at least one in a thousand, and the chance of an impact to general aviation was at least one in a hundred. [3] After FAA executives were briefed about the potential for aircraft impacts during the Columbia accident, and the challenges presented by integration of innovative vehicles such as SpaceShipOne into the National Airspace System (NAS), the FAA began to investigate a decision support tool to better manage the interface of space and air traffic in the future. In addition, the FAA asked the Common Standards Working Group (CSWG) to investigate risk and air traffic management issues that arise in the event of space vehicle accidents and to develop safety standards to govern the interface between space and air traffic. Most recently, the FAA funded a study of aircraft risk around operating areas for future flights of suborbital rockets that may be authorized by an Experimental Permit (EP). Congress mandated that the FAA develop the EP regime as a streamlined

14 CFR 417.109 - Ground safety.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Ground safety. 417.109 Section 417.109... TRANSPORTATION LICENSING LAUNCH SAFETY Launch Safety Responsibilities § 417.109 Ground safety. (a) Ground safety... 417.115(c), and subpart E of this part provide launch operator ground safety requirements. ...

14 CFR 417.109 - Ground safety.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Ground safety. 417.109 Section 417.109... TRANSPORTATION LICENSING LAUNCH SAFETY Launch Safety Responsibilities § 417.109 Ground safety. (a) Ground safety... 417.115(c), and subpart E of this part provide launch operator ground safety requirements. ...

14 CFR Appendix A to Part 417 - Flight Safety Analysis Methodologies and Products for a Launch Vehicle Flown With a Flight Safety...

Code of Federal Regulations, 2011 CFR

2011-01-01

... time duration of the turn and must show increments not to exceed one second. The series of tumble turns... FAA will measure any proposed alternative analysis approach. This appendix also identifies the... approach provides an equivalent level of safety. If a Federal launch range performs the launch operator's...

Design for Reliability and Safety Approach for the NASA New Launch Vehicle

NASA Technical Reports Server (NTRS)

Safie, Fayssal, M.; Weldon, Danny M.

2007-01-01

The United States National Aeronautics and Space Administration (NASA) is in the midst of a space exploration program intended for sending crew and cargo to the international Space Station (ISS), to the moon, and beyond. This program is called Constellation. As part of the Constellation program, NASA is developing new launch vehicles aimed at significantly increase safety and reliability, reduce the cost of accessing space, and provide a growth path for manned space exploration. Achieving these goals requires a rigorous process that addresses reliability, safety, and cost upfront and throughout all the phases of the life cycle of the program. This paper discusses the "Design for Reliability and Safety" approach for the NASA new crew launch vehicle called ARES I. The ARES I is being developed by NASA Marshall Space Flight Center (MSFC) in support of the Constellation program. The ARES I consists of three major Elements: A solid First Stage (FS), an Upper Stage (US), and liquid Upper Stage Engine (USE). Stacked on top of the ARES I is the Crew exploration vehicle (CEV). The CEV consists of a Launch Abort System (LAS), Crew Module (CM), Service Module (SM), and a Spacecraft Adapter (SA). The CEV development is being led by NASA Johnson Space Center (JSC). Designing for high reliability and safety require a good integrated working environment and a sound technical design approach. The "Design for Reliability and Safety" approach addressed in this paper discusses both the environment and the technical process put in place to support the ARES I design. To address the integrated working environment, the ARES I project office has established a risk based design group called "Operability Design and Analysis" (OD&A) group. This group is an integrated group intended to bring together the engineering, design, and safety organizations together to optimize the system design for safety, reliability, and cost. On the technical side, the ARES I project has, through the OD

Analysis of pharmaceutical safety-related regulatory actions in Japan: do tradeoffs exist between safer drugs and launch delay?

PubMed

Yamada, Toru; Kusama, Makiko; Hirai, Yuka; Arnold, Frank; Sugiyama, Yuichi; Ono, Shunsuke

2010-12-01

Prediction and management of drug safety is a global regulatory issue. Safety-related regulatory actions (SRRAs) are taken mostly when unexpected adverse drug reactions occur. Currently, Japan is reconciled to delayed access to new drugs (ie, launch delay compared to Western countries), but may have been benefiting by free-riding on safety data accumulated in other countries prior to Japanese launch. To identify factors that are significantly associated with SRRAs, and to discuss the challenges that Japan might have to face with increasing access to new drugs. The SRRAs of 135 new drugs approved from January 2000 to December 2005 were analyzed to investigate association with launch lag, company and drug characteristics, market size, submission data, and regulatory status. SRRAs were measured in terms of the number of emergency safety information notifications and official safety instructions issued by the Japanese regulatory agency within 3 years after approval. A negative binomial distribution model was used for regression analysis. Longer launch lags and presence of drugs with similar modes of action were associated with fewer SRRAs. Bridging strategy showed increased SRRAs. No significant association was observed between SRRAs and the subject number in clinical data packages. Occurrence of SRRAs was varied among development strategy, preceding products, and regional regulations. The occurrence of SRRAs was associated with the accumulation of both foreign and domestic postmarketing evidence rather than with clinical trial data upon launch. Considering the paradigm shift to simultaneous global drug development and filing for regulatory approval, this study indicates the importance of intensive data collection in the early postmarketing phase and use of safety information in early markets. However, even if we would be sufficiently cautious about safety risks of new drugs, a population that enjoys first-in-class drugs probably has to bear the risks.

14 CFR 415.33 - Safety organization.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Safety organization. 415.33 Section 415.33... TRANSPORTATION LICENSING LAUNCH LICENSE Safety Review and Approval for Launch From a Federal Launch Range § 415.33 Safety organization. (a) An applicant shall maintain a safety organization and document it by...

Arianespace Launch Service Operator Policy for Space Safety (Regulations and Standards for Safety)

NASA Astrophysics Data System (ADS)

Jourdainne, Laurent

2013-09-01

Since December 10, 2010, the French Space Act has entered into force. This French Law, referenced as LOS N°2008-518 ("Loi relative aux Opérations Spatiales"), is compliant with international rules. This French Space Act (LOS) is now applicable for any French private company whose business is dealing with rocket launch or in orbit satellites operations. Under CNES leadership, Arianespace contributed to the consolidation of technical regulation applicable to launch service operators.Now for each launch operation, the operator Arianespace has to apply for an authorization to proceed to the French ministry in charge of space activities. In the files issued for this purpose, the operator is able to justify a high level of warranties in the management of risks through robust processes in relation with the qualification maintenance, the configuration management, the treatment of technical facts and relevant conclusions and risks reduction implementation when needed.Thanks to the historic success of Ariane launch systems through its more than 30 years of exploitation experience (54 successes in a row for latest Ariane 5 launches), Arianespace as well as European public and industrial partners developed key experiences and knowledge as well as competences in space security and safety. Soyuz-ST and Vega launch systems are now in operation from Guiana Space Center with identical and proved risks management processes. Already existing processes have been slightly adapted to cope with the new roles and responsibilities of each actor contributing to the launch preparation and additional requirements like potential collision avoidance with inhabited space objects.Up to now, more than 12 Ariane 5 launches and 4 Soyuz-ST launches have been authorized under the French Space Act regulations. Ariane 5 and Soyuz- ST generic demonstration of conformity have been issued, including exhaustive danger and impact studies for each launch system.This article will detail how Arianespace

14 CFR 431.33 - Safety organization.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Safety organization. 431.33 Section 431.33... TRANSPORTATION LICENSING LAUNCH AND REENTRY OF A REUSABLE LAUNCH VEHICLE (RLV) Safety Review and Approval for Launch and Reentry of a Reusable Launch Vehicle § 431.33 Safety organization. (a) An applicant shall...

14 CFR 415.117 - Ground safety.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Ground safety. 415.117 Section 415.117... From a Non-Federal Launch Site § 415.117 Ground safety. (a) General. An applicant's safety review document must include a ground safety analysis report, and a ground safety plan for its launch processing...

14 CFR 415.117 - Ground safety.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Ground safety. 415.117 Section 415.117... From a Non-Federal Launch Site § 415.117 Ground safety. (a) General. An applicant's safety review document must include a ground safety analysis report, and a ground safety plan for its launch processing...

The Forest Service Safety Survey: results from an employee-wide safety attitude survey

Treesearch

Vanessa R. Lane; Ken Cordell; Stanley J. Zarnoch; Gary T. Green; Neelam Poudyal; Susan Fox

2014-01-01

The Forest Service, U.S. Department of Agriculture launched a Safety Journey in 2011 aimed at elevating safety consciousness and practice in the Agency. All employees were required to attend an engagement session during the year to introduce them to the Safety Journey. In September, a survey was launched to help Forest Service leadership better understand employee...

Study of safety implications for shuttle launched spacecraft using fluorinated oxidizers. Volume 2: Executive summary

NASA Technical Reports Server (NTRS)

1975-01-01

An abbreviated version of the conclusions dealing with the safety implications of using liquid fluorinated oxidizers on space shuttle launched spacecraft was presented. The complete version was presented in volume 1.

14 CFR 417.103 - Safety organization.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Safety organization. 417.103 Section 417... organization. (a) A launch operator must maintain and document a safety organization. A launch operator must... within the launch operator's organization and between the launch operator and any federal launch range or...

Evolution of area access safety training required for gaining access to Space Shuttle launch and landing facilities

NASA Technical Reports Server (NTRS)

Willams, M. C.

1985-01-01

Assuring personnel and equipment are fully protected during the Space Shuttle launch and landing operations has been a primary concern of NASA and its associated contractors since the inception of the program. A key factor in support of this policy has been the area access safety training requirements for badging of employees assigned to work on Space Shuttle Launch and Facilities. This requirement was targeted for possible cost savings and the transition of physical on-site walkdowns to the use of television tapes has realized program cost savings while continuing to fully satisfy the area access safety training requirements.

Joint Ordnance Test Procedure (JOTP)-010 Safety and Suitability for Service Assessment Testing for Shoulder Launched Munitions

DTIC Science & Technology

2016-05-09

electromagnetic environment for which they are designed to be used. These tests are performed on a powered weapon during simulated normal operation and are...010B SAFETY AND SUITABILITY FOR SERVICE ASSESSMENT TESTING FOR SHOULDER LAUNCHED MUNITIONS Joint Services Munition Safety Test Working Group JOTP...12 6.8 Test Sample Quantities .......................................................... 13 7. PRE- AND POST - TEST INSPECTIONS

Autonomous Flight Safety System

NASA Technical Reports Server (NTRS)

Ferrell, Bob; Santuro, Steve; Simpson, James; Zoerner, Roger; Bull, Barton; Lanzi, Jim

2004-01-01

Autonomous Flight Safety System (AFSS) is an independent flight safety system designed for small to medium sized expendable launch vehicles launching from or needing range safety protection while overlying relatively remote locations. AFSS replaces the need for a man-in-the-loop to make decisions for flight termination. AFSS could also serve as the prototype for an autonomous manned flight crew escape advisory system. AFSS utilizes onboard sensors and processors to emulate the human decision-making process using rule-based software logic and can dramatically reduce safety response time during critical launch phases. The Range Safety flight path nominal trajectory, its deviation allowances, limit zones and other flight safety rules are stored in the onboard computers. Position, velocity and attitude data obtained from onboard global positioning system (GPS) and inertial navigation system (INS) sensors are compared with these rules to determine the appropriate action to ensure that people and property are not jeopardized. The final system will be fully redundant and independent with multiple processors, sensors, and dead man switches to prevent inadvertent flight termination. AFSS is currently in Phase III which includes updated algorithms, integrated GPS/INS sensors, large scale simulation testing and initial aircraft flight testing.

14 CFR 431.33 - Safety organization.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Safety organization. 431.33 Section 431.33... Launch and Reentry of a Reusable Launch Vehicle § 431.33 Safety organization. (a) An applicant shall maintain a safety organization and document it by identifying lines of communication and approval authority...

2006 NASA Range Safety Annual Report

NASA Technical Reports Server (NTRS)

TenHaken, Ron; Daniels, B.; Becker, M.; Barnes, Zack; Donovan, Shawn; Manley, Brenda

2007-01-01

Throughout 2006, Range Safety was involved in a number of exciting and challenging activities and events, from developing, implementing, and supporting Range Safety policies and procedures-such as the Space Shuttle Launch and Landing Plans, the Range Safety Variance Process, and the Expendable Launch Vehicle Safety Program procedures-to evaluating new technologies. Range Safety training development is almost complete with the last course scheduled to go on line in mid-2007. Range Safety representatives took part in a number of panels and councils, including the newly formed Launch Constellation Range Safety Panel, the Range Commanders Council and its subgroups, the Space Shuttle Range Safety Panel, and the unmanned aircraft systems working group. Space based range safety demonstration and certification (formerly STARS) and the autonomous flight safety system were successfully tested. The enhanced flight termination system will be tested in early 2007 and the joint advanced range safety system mission analysis software tool is nearing operational status. New technologies being evaluated included a processor for real-time compensation in long range imaging, automated range surveillance using radio interferometry, and a space based range command and telemetry processor. Next year holds great promise as we continue ensuring safety while pursuing our quest beyond the Moon to Mars.

CloudSat Safety Operations at Vandenberg AFB

NASA Technical Reports Server (NTRS)

Greenberg, Steve

2006-01-01

CloudSat safety operations at Vendenberg AFB is given. The topics include: 1) CloudSat Project Overview; 2) Vandenberg Ground Operations; 3) Delta II Launch Vehicle; 4) The A-Train; 5) System Safety Management; 6) CALIPSO Hazards Assessment; 7) CALIPSO Supplemental Safeguards; 8) Joint System Safety Operations; 9) Extended Stand-down; 10) Launch Delay Safety Concerns; and 11) Lessons Learned.

14 CFR 417.405 - Ground safety analysis.

Code of Federal Regulations, 2013 CFR

2013-01-01

... qualified to perform the ground safety analysis through training, education, and experience. (c) A launch... unfenced boundary of an entire industrial complex or multi-user launch site. A launch location hazard may.... (j) A launch operator must verify all information in a ground safety analysis, including design...

14 CFR 417.405 - Ground safety analysis.

Code of Federal Regulations, 2014 CFR

2014-01-01

... qualified to perform the ground safety analysis through training, education, and experience. (c) A launch... unfenced boundary of an entire industrial complex or multi-user launch site. A launch location hazard may.... (j) A launch operator must verify all information in a ground safety analysis, including design...

14 CFR 417.405 - Ground safety analysis.

Code of Federal Regulations, 2012 CFR

2012-01-01

... qualified to perform the ground safety analysis through training, education, and experience. (c) A launch... unfenced boundary of an entire industrial complex or multi-user launch site. A launch location hazard may.... (j) A launch operator must verify all information in a ground safety analysis, including design...

14 CFR 415.115 - Flight safety.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 4 2012-01-01 2012-01-01 false Flight safety. 415.115 Section 415.115... From a Non-Federal Launch Site § 415.115 Flight safety. (a) Flight safety analysis. An applicant's safety review document must describe each analysis method employed to meet the flight safety analysis...

14 CFR 415.115 - Flight safety.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Flight safety. 415.115 Section 415.115... From a Non-Federal Launch Site § 415.115 Flight safety. (a) Flight safety analysis. An applicant's safety review document must describe each analysis method employed to meet the flight safety analysis...

14 CFR 415.115 - Flight safety.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 4 2013-01-01 2013-01-01 false Flight safety. 415.115 Section 415.115... From a Non-Federal Launch Site § 415.115 Flight safety. (a) Flight safety analysis. An applicant's safety review document must describe each analysis method employed to meet the flight safety analysis...

14 CFR 415.115 - Flight safety.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Flight safety. 415.115 Section 415.115... From a Non-Federal Launch Site § 415.115 Flight safety. (a) Flight safety analysis. An applicant's safety review document must describe each analysis method employed to meet the flight safety analysis...

14 CFR 415.115 - Flight safety.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 4 2014-01-01 2014-01-01 false Flight safety. 415.115 Section 415.115... From a Non-Federal Launch Site § 415.115 Flight safety. (a) Flight safety analysis. An applicant's safety review document must describe each analysis method employed to meet the flight safety analysis...

Ensuring Payload Safety in Missions with Special Partnerships

NASA Technical Reports Server (NTRS)

Staubus, Calvert A.; Willenbring, Rachel C.; Blankenship, Michael D.

2016-01-01

The National Aeronautics and Space Administration (NASA) Expendable Launch Vehicle (ELV) payload space flight missions involve cooperative work between NASA and partners including spacecraft (or payload) contractors, universities, nonprofit research centers, Agency payload organization, Range Safety organization, Agency launch service organizations, and launch vehicle contractors. The role of NASA's Safety and Mission Assurance (SMA) Directorate is typically fairly straightforward, but when a mission's partnerships become more complex, to realize cost and science benefits (e.g., multi-agency payload(s) or cooperative international missions), the task of ensuring payload safety becomes much more challenging. This paper discusses lessons learned from NASA safety professionals working multiple-agency missions and offers suggestions to help fellow safety professionals working multiple-agency missions.

14 CFR 415.131 - Flight safety system crew data.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 4 2014-01-01 2014-01-01 false Flight safety system crew data. 415.131... Launch Vehicle From a Non-Federal Launch Site § 415.131 Flight safety system crew data. (a) An applicant's safety review document must identify each flight safety system crew position and the role of that...

Space nuclear safety from a user's viewpoint

NASA Technical Reports Server (NTRS)

Campbell, R. W.

1985-01-01

The National Aeronautics and Space Administration (NASA) launched the Jet Propulsion Laboratory's (JPL) two Voyager spacecraft to Jupiter in 1977, each using three radioisotope thermoelectric generators (RTGs) supplied by the Department of Energy (DOE) for onboard electric power. In 1986 NASA will launch JPL's Galileo spacecraft to Jupiter equipped with two DOE supplied RTGs of an improved design. NASA and JPL are also responsible for obtaining a single RTG of this type from DOE and supplying it to the European Space Agency as part of its participation in the International Solar Polar Mission. As a result of these missions, JPL has been deeply involved in space nuclear safety as a user. This paper will give a brief review of the user contributions by JPL - and NASA in general - to the nuclear safety processes and relate them to the overall nuclear safety program necessary for the launch of an RTG. The two major safety areas requiring user support are the ground operations involving RTGs at the launch site and the failure modes and probabilities associated with launch accidents.

The FAA's Approach to Quality Assurance in the Flight Safety Analysis of Launch and Reentry Vehicles

NASA Astrophysics Data System (ADS)

Murray, Daniel P.; Weil, Andre

2010-09-01

The U.S. Federal Aviation Administration(FAA) Office of Commercial Space Transportation’s safety mission is to ensure protection of the public, property, and the national security and foreign policy interests of the United States during commercial launch and reentry activities. As part of this mission, the FAA issues licenses to the operators of launch and reentry vehicles who successfully demonstrate compliance with FAA regulations. To meet these regulations, vehicle operators submit an application that contains, among other things, flight safety analyses of their proposed missions. In the process of evaluating these submitted analyses, the FAA often conducts its own independent analyses, using input data from the submitted license application. These analyses are conducted according to approved procedures using industry developed tools. To assist in achieving the highest levels of quality in these independent analyses, the FAA has developed a quality assurance program that consists of multiple levels of review. These reviews rely on the work of multiple teams, as well as additional, independently performed work of support contractors. This paper describes the FAA’s quality assurance process for flight safety analyses. Members of the commercial space industry may find that elements of this process can be easily applied to their own analyses, improving the quality of the material they submit to the FAA in their license applications.

Ares I-X Range Safety Analyses Overview

NASA Technical Reports Server (NTRS)

Starr, Brett R.; Gowan, John W., Jr.; Thompson, Brian G.; Tarpley, Ashley W.

2011-01-01

Ares I-X was the first test flight of NASA's Constellation Program's Ares I Crew Launch Vehicle designed to provide manned access to low Earth orbit. As a one-time test flight, the Air Force's 45th Space Wing required a series of Range Safety analysis data products to be developed for the specified launch date and mission trajectory prior to granting flight approval on the Eastern Range. The range safety data package is required to ensure that the public, launch area, and launch complex personnel and resources are provided with an acceptable level of safety and that all aspects of prelaunch and launch operations adhere to applicable public laws. The analysis data products, defined in the Air Force Space Command Manual 91-710, Volume 2, consisted of a nominal trajectory, three sigma trajectory envelopes, stage impact footprints, acoustic intensity contours, trajectory turn angles resulting from potential vehicle malfunctions (including flight software failures), characterization of potential debris, and debris impact footprints. These data products were developed under the auspices of the Constellation's Program Launch Constellation Range Safety Panel and its Range Safety Trajectory Working Group with the intent of beginning the framework for the operational vehicle data products and providing programmatic review and oversight. A multi-center NASA team in conjunction with the 45th Space Wing, collaborated within the Trajectory Working Group forum to define the data product development processes, performed the analyses necessary to generate the data products, and performed independent verification and validation of the data products. This paper outlines the Range Safety data requirements and provides an overview of the processes established to develop both the data products and the individual analyses used to develop the data products, and it summarizes the results of the analyses required for the Ares I-X launch.

14 CFR 415.33 - Safety organization.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Safety organization. 415.33 Section 415.33....33 Safety organization. (a) An applicant shall maintain a safety organization and document it by... communication, both within the applicant's organization and between the applicant and any federal launch range...

14 CFR 415.5 - Policy and safety approvals.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 415.5 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION LICENSING LAUNCH LICENSE General § 415.5 Policy and safety approvals. To obtain a launch license, an applicant must obtain policy and safety approvals from the FAA. Requirements...

14 CFR 415.5 - Policy and safety approvals.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 415.5 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION LICENSING LAUNCH LICENSE General § 415.5 Policy and safety approvals. To obtain a launch license, an applicant must obtain policy and safety approvals from the FAA. Requirements...

Aerospace Safety Advisory Panel

NASA Technical Reports Server (NTRS)

1999-01-01

This report covers the activities of the Aerospace Safety Advisory Panel (ASAP) for calendar year 1998-a year of sharp contrasts and significant successes at NASA. The year opened with the announcement of large workforce cutbacks. The slip in the schedule for launching the International Space Station (ISS) created a 5-month hiatus in Space Shuttle launches. This slack period ended with the successful and highly publicized launch of the STS-95 mission. As the year closed, ISS assembly began with the successful orbiting and joining of the Functional Cargo Block (FGB), Zarya, from Russia and the Unity Node from the United States. Throughout the year, the Panel maintained its scrutiny of NASAs safety processes. Of particular interest were the potential effects on safety of workforce reductions and the continued transition of functions to the Space Flight Operations Contractor. Attention was also given to the risk management plans of the Aero-Space Technology programs, including the X-33, X-34, and X-38. Overall, the Panel concluded that safety is well served for the present. The picture is not as clear for the future. Cutbacks have limited the depth of talent available. In many cases, technical specialties are "one deep." The extended hiring freeze has resulted in an older workforce that will inevitably suffer significant departures from retirements in the near future. The resulting "brain drain" could represent a future safety risk unless appropriate succession planning is started expeditiously. This and other topics are covered in the section addressing workforce. In the case of the Space Shuttle, beneficial and mandatory safety and operational upgrades are being delayed because of a lack of sufficient present funding. Likewise, the ISS has little flexibility to begin long lead-time items for upgrades or contingency planning.

NASA Range Safety Annual Report 2007

NASA Technical Reports Server (NTRS)

Dumont, Alan G.

2007-01-01

As always, Range Safety has been involved in a number of exciting and challenging activities and events. Throughout the year, we have strived to meet our goal of protecting the public, the workforce, and property during range operations. During the past year, Range Safety was involved in the development, implementation, and support of range safety policy. Range Safety training curriculum development was completed this year and several courses were presented. Tailoring exercises concerning the Constellation Program were undertaken with representatives from the Constellation Program, the 45th Space Wing, and the Launch Constellation Range Safety Panel. Range Safety actively supported the Range Commanders Council and it subgroups and remained involved in updating policy related to flight safety systems and flight safety analysis. In addition, Range Safety supported the Space Shuttle Range Safety Panel and addressed policy concerning unmanned aircraft systems. Launch operations at Kennedy Space Center, the Eastern and Western ranges, Dryden Flight Research Center, and Wallops Flight Facility were addressed. Range Safety was also involved in the evaluation of a number of research and development efforts, including the space-based range (formerly STARS), the autonomous flight safety system, the enhanced flight termination system, and the joint advanced range safety system. Flight safety system challenges were evaluated. Range Safety's role in the Space Florida Customer Assistance Service Program for the Eastern Range was covered along with our support for the Space Florida Educational Balloon Release Program. We hope you have found the web-based format both accessible and easy to use. Anyone having questions or wishing to have an article included in the 2008 Range Safety Annual Report should contact Alan Dumont, the NASA Range Safety Program Manager located at the Kennedy Space Center, or Michael Dook at NASA Headquarters.

NASA Expendable Launch Vehicle (ELV) Payload Safety Review Process

NASA Technical Reports Server (NTRS)

Starbus, Calvert S.; Donovan, Shawn; Dook, Mike; Palo, Tom

2007-01-01

Issues addressed by this program: (1) Complicated roles and responsibilities associated with multi-partner projects (2) Working relationships and communications between all organizations involved in the payload safety process (3) Consistent interpretation and implementation of safety requirements from one project to the rest (4) Consistent implementation of the Tailoring Process (5) Clearly defined NASA decision-making-authority (6) Bring Agency-wide perspective to each ElV payload project. Current process requires a Payload Safety Working Group (PSWG) for eac payload with representatives from all involved organizations.

Ares I-X Range Safety Flight Envelope Analysis

NASA Technical Reports Server (NTRS)

Starr, Brett R.; Olds, Aaron D.; Craig, Anthony S.

2011-01-01

Ares I-X was the first test flight of NASA's Constellation Program's Ares I Crew Launch Vehicle designed to provide manned access to low Earth orbit. As a one-time test flight, the Air Force's 45th Space Wing required a series of Range Safety analysis data products to be developed for the specified launch date and mission trajectory prior to granting flight approval on the Eastern Range. The range safety data package is required to ensure that the public, launch area, and launch complex personnel and resources are provided with an acceptable level of safety and that all aspects of prelaunch and launch operations adhere to applicable public laws. The analysis data products, defined in the Air Force Space Command Manual 91-710, Volume 2, consisted of a nominal trajectory, three sigma trajectory envelopes, stage impact footprints, acoustic intensity contours, trajectory turn angles resulting from potential vehicle malfunctions (including flight software failures), characterization of potential debris, and debris impact footprints. These data products were developed under the auspices of the Constellation's Program Launch Constellation Range Safety Panel and its Range Safety Trajectory Working Group with the intent of beginning the framework for the operational vehicle data products and providing programmatic review and oversight. A multi-center NASA team in conjunction with the 45th Space Wing, collaborated within the Trajectory Working Group forum to define the data product development processes, performed the analyses necessary to generate the data products, and performed independent verification and validation of the data products. This paper outlines the Range Safety data requirements and provides an overview of the processes established to develop both the data products and the individual analyses used to develop the data products, and it summarizes the results of the analyses required for the Ares I-X launch.

Autonomous Flight Safety System

NASA Technical Reports Server (NTRS)

Simpson, James

2010-01-01

The Autonomous Flight Safety System (AFSS) is an independent self-contained subsystem mounted onboard a launch vehicle. AFSS has been developed by and is owned by the US Government. Autonomously makes flight termination/destruct decisions using configurable software-based rules implemented on redundant flight processors using data from redundant GPS/IMU navigation sensors. AFSS implements rules determined by the appropriate Range Safety officials.

Autonomous Flight Safety System - Phase III

NASA Technical Reports Server (NTRS)

2008-01-01

The Autonomous Flight Safety System (AFSS) is a joint KSC and Wallops Flight Facility project that uses tracking and attitude data from onboard Global Positioning System (GPS) and inertial measurement unit (IMU) sensors and configurable rule-based algorithms to make flight termination decisions. AFSS objectives are to increase launch capabilities by permitting launches from locations without range safety infrastructure, reduce costs by eliminating some downrange tracking and communication assets, and reduce the reaction time for flight termination decisions.

NASA's Software Safety Standard

NASA Technical Reports Server (NTRS)

Ramsay, Christopher M.

2005-01-01

NASA (National Aeronautics and Space Administration) relies more and more on software to control, monitor, and verify its safety critical systems, facilities and operations. Since the 1960's there has hardly been a spacecraft (manned or unmanned) launched that did not have a computer on board that provided vital command and control services. Despite this growing dependence on software control and monitoring, there has been no consistent application of software safety practices and methodology to NASA's projects with safety critical software. Led by the NASA Headquarters Office of Safety and Mission Assurance, the NASA Software Safety Standard (STD-18l9.13B) has recently undergone a significant update in an attempt to provide that consistency. This paper will discuss the key features of the new NASA Software Safety Standard. It will start with a brief history of the use and development of software in safety critical applications at NASA. It will then give a brief overview of the NASA Software Working Group and the approach it took to revise the software engineering process across the Agency.

14 CFR 417.411 - Safety clear zones for hazardous operations.

Code of Federal Regulations, 2011 CFR

2011-01-01

... zone on the following criteria: (i) For a possible explosive event, base a safety clear zone on the... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Safety clear zones for hazardous operations... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION LICENSING LAUNCH SAFETY Ground Safety § 417.411 Safety clear zones...

The Interagency Nuclear Safety Review Panel's Galileo safety evaluation report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nelson, R.C.; Gray, L.B.; Huff, D.A.

The safety evaluation report (SER) for Galileo was prepared by the Interagency Nuclear Safety Review Panel (INSRP) coordinators in accordance with Presidential directive/National Security Council memorandum 25. The INSRP consists of three coordinators appointed by their respective agencies, the Department of Defense, the Department of Energy (DOE), and the National Aeronautics and Space Administration (NASA). These individuals are independent of the program being evaluated and depend on independent experts drawn from the national technical community to serve on the five INSRP subpanels. The Galileo SER is based on input provided by the NASA Galileo Program Office, review and assessment ofmore » the final safety analysis report prepared by the Office of Special Applications of the DOE under a memorandum of understanding between NASA and the DOE, as well as other related data and analyses. The SER was prepared for use by the agencies and the Office of Science and Technology Policy, Executive Office of the Present for use in their launch decision-making process. Although more than 20 nuclear-powered space missions have been previously reviewed via the INSRP process, the Galileo review constituted the first review of a nuclear power source associated with launch aboard the Space Transportation System.« less

14 CFR 417.405 - Ground safety analysis.

Code of Federal Regulations, 2011 CFR

2011-01-01

... hazard from affecting the public. A launch operator must incorporate the launch site operator's systems... personnel who are knowledgeable of launch vehicle systems, launch processing, ground systems, operations...) Begin a ground safety analysis by identifying the systems and operations to be analyzed; (2) Define the...

14 CFR 417.405 - Ground safety analysis.

Code of Federal Regulations, 2010 CFR

2010-01-01

... hazard from affecting the public. A launch operator must incorporate the launch site operator's systems... personnel who are knowledgeable of launch vehicle systems, launch processing, ground systems, operations...) Begin a ground safety analysis by identifying the systems and operations to be analyzed; (2) Define the...

2012 NASA Range Safety Annual Report

NASA Technical Reports Server (NTRS)

Dumont, Alan G.

2012-01-01

This report provides a NASA Range Safety (NRS) overview for current and potential range users. This report contains articles which cover a variety of subject areas, summaries of various NASA Range Safety Program (RSP) activities performed during the past year, links to past reports, and information on several projects that may have a profound impact on the way business will be conducted in the future. Specific topics discussed in the 2012 NASA Range Safety Annual Report include a program overview and 2012 highlights; Range Safety Training; Independent Assessments; Support to Program Operations at all ranges conducting NASA launch/flight operations; a continuing overview of emerging range safety-related technologies; and status reports from all of the NASA Centers that have Range Safety responsibilities.

Aerospace Safety Advisory Panel

NASA Technical Reports Server (NTRS)

2002-01-01

This report presents the results of the Aerospace Safety Advisory Panel (ASAP) activities during 2002. The format of the report has been modified to capture a long-term perspective. Section II is new and highlights the Panel's view of NASA's safety progress during the year. Section III contains the pivotal safety issues facing NASA in the coming year. Section IV includes the program area findings and recommendations. The Panel has been asked by the Administrator to perform several special studies this year, and the resulting white papers appear in Appendix C. The year has been filled with significant achievements for NASA in both successful Space Shuttle operations and International Space Station (ISS) construction. Throughout the year, safety has been first and foremost in spite of many changes throughout the Agency. The relocation of the Orbiter Major Modifications (OMMs) from California to Kennedy Space Center (KSC) appears very successful. The transition of responsibilities for program management of the Space Shuttle and ISS programs from Johnson Space Center (JSC) to NASA Headquarters went smoothly. The decision to extend the life of the Space Shuttle as the primary NASA vehicle for access to space is viewed by the Panel as a prudent one. With the appropriate investments in safety improvements, in maintenance, in preserving appropriate inventories of spare parts, and in infrastructure, the Space Shuttle can provide safe and reliable support for the ISS for the foreseeable future. Indications of an aging Space Shuttle fleet occurred on more than one occasion this year. Several flaws went undetected in the early prelaunch tests and inspections. In all but one case, the problems were found prior to launch. These incidents were all handled properly and with safety as the guiding principle. Indeed, launches were postponed until the problems were fully understood and mitigating action could be taken. These incidents do, however, indicate the need to analyze the

2009 NASA Range Safety Annual Report

NASA Technical Reports Server (NTRS)

2010-01-01

This year, NASA Range Safety transitioned to a condensed annual report to allow for Secretariat support to the Range Safety Group, Risk Committee. Although much shorter than in previous years, this report contains full-length articles concerning various subject areas, as well as links to past reports. Additionally, summaries from various NASA Range Safety Program activities that took place throughout the year are presented, as well as information on several projects that may have a profound impact on the way business will be done in the future. The sections include a program overview and 2009 highlights; Range Safety Training; Range Safety Policy; Independent Assessments Support to Program Operations at all ranges conducting NASA launch operations; a continuing overview of emerging range safety-related technologies; and status reports from all of the NASA Centers that have Range Safety responsibilities.

14 CFR 417.411 - Safety clear zones for hazardous operations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Safety clear zones for hazardous operations. 417.411 Section 417.411 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION LICENSING LAUNCH SAFETY Ground Safety § 417.411 Safety clear zones...

Patient safety--worker safety: building a culture of safety to improve healthcare worker and patient well-being.

PubMed

Yassi, Annalee; Hancock, Tina

2005-01-01

Patient safety within the Canadian healthcare system is currently a high national priority, which merits a comprehensive understanding of the underlying causes of adverse events. Not least among these is worker health and safety, which is linked to patient outcomes. Healthcare workers have a high risk of workplace injuries and more mental health problems than most other occupational groups. Many healthcare professionals feel fatigued, stressed, in pain, or at risk of illness or injury-factors they feel impede their ability to provide consistent quality care. With this background, the Occupational Health and Safety Agency for Healthcare (OHSAH) in British Columbia, jointly governed by healthcare unions and healthcare employers, launched several major initiatives to improve the healthcare workplace. These included the promotion of safe patient handling, adaptive clothing, scheduled toileting, stroke management training, measures to improve management of aggressive behaviour and, of course, infection control-all intended to improve the safety of workers, but also to improve patient safety and quality of care. Other projects also explicitly promoting physical and mental health at work, as well as patient safety are also underway. Results of the projects are at various stages of completion, but ample evidence has already been obtained to indicate that looking after the well-being of healthcare workers results in safer and better quality patient care. While more research is needed, our work to date suggests that a comprehensive systems approach to promoting a climate of safety, which includes taking into account workplace organizational factors and physical and psychological hazards for workers, is the best way to improve the healthcare workplace and thereby patient safety.

14 CFR Appendix B to Part 415 - Safety Review Document Outline

Code of Federal Regulations, 2013 CFR

2013-01-01

....0Flight Safety (§ 415.115) 4.1Initial Flight Safety Analysis 4.1.1Flight Safety Sub-Analyses, Methods, and... Analysis Data 4.2Radionuclide Data (where applicable) 4.3Flight Safety Plan 4.3.1Flight Safety Personnel 4... Safety (§ 415.117) 5.1Ground Safety Analysis Report 5.2Ground Safety Plan 6.0Launch Plans (§ 415.119 and...

14 CFR Appendix B to Part 415 - Safety Review Document Outline

Code of Federal Regulations, 2014 CFR

2014-01-01

....0Flight Safety (§ 415.115) 4.1Initial Flight Safety Analysis 4.1.1Flight Safety Sub-Analyses, Methods, and... Analysis Data 4.2Radionuclide Data (where applicable) 4.3Flight Safety Plan 4.3.1Flight Safety Personnel 4... Safety (§ 415.117) 5.1Ground Safety Analysis Report 5.2Ground Safety Plan 6.0Launch Plans (§ 415.119 and...

Nuclear Safety for Space Systems

NASA Astrophysics Data System (ADS)

Offiong, Etim

2010-09-01

It is trite, albeit a truism, to say that nuclear power can provide propulsion thrust needed to launch space vehicles and also, to provide electricity for powering on-board systems, especially for missions to the Moon, Mars and other deep space missions. Nuclear Power Sources(NPSs) are known to provide more capabilities than solar power, fuel cells and conventional chemical means. The worry has always been that of safety. The earliest superpowers(US and former Soviet Union) have designed and launched several nuclear-powered systems, with some failures. Nuclear failures and accidents, however little the number, could be far-reaching geographically, and are catastrophic to humans and the environment. Building on the numerous research works on nuclear power on Earth and in space, this paper seeks to bring to bear, issues relating to safety of space systems - spacecrafts, astronauts, Earth environment and extra terrestrial habitats - in the use and application of nuclear power sources. It also introduces a new formal training course in Space Systems Safety.

14 CFR 431.71 - Public safety responsibility.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 4 2012-01-01 2012-01-01 false Public safety responsibility. 431.71 Section 431.71 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION... Requirements-Reusable Launch Vehicle Mission License Terms and Conditions § 431.71 Public safety responsibility...

14 CFR 431.71 - Public safety responsibility.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 4 2013-01-01 2013-01-01 false Public safety responsibility. 431.71 Section 431.71 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION... Requirements-Reusable Launch Vehicle Mission License Terms and Conditions § 431.71 Public safety responsibility...

14 CFR 431.71 - Public safety responsibility.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 4 2014-01-01 2014-01-01 false Public safety responsibility. 431.71 Section 431.71 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION... Requirements-Reusable Launch Vehicle Mission License Terms and Conditions § 431.71 Public safety responsibility...

14 CFR 417.7 - Public safety responsibility.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Public safety responsibility. 417.7 Section 417.7 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION... safety responsibility. A launch operator is responsible for ensuring the safe conduct of a licensed...

14 CFR 417.7 - Public safety responsibility.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Public safety responsibility. 417.7 Section 417.7 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION... safety responsibility. A launch operator is responsible for ensuring the safe conduct of a licensed...

14 CFR 415.127 - Flight safety system design and operation data.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Expendable Launch Vehicle From a Non-Federal Launch Site § 415.127 Flight safety system design and operation...: flight termination system; command control system; tracking; telemetry; communications; flight safety... control system. (7) Flight termination system component storage, operating, and service life. A listing of...

Super Safety and Health Day at KSC

NASA Technical Reports Server (NTRS)

2000-01-01

Employees take a look at this NASCAR auto being displayed during Super Safety and Health Day at KSC. Safety Day is a full day of NASA-sponsored, KSC and 45th Space Wing events involving a number of health and safety related activities: Displays, vendors, technical paper sessions, panel discussions, a keynote speaker, etc. The entire Center and Wing stand down to participate in the planned events. Safety Day is held annually to proactively increase awareness in safety and health among the government and contractor workforce population. The first guiding principle at KSC is '''Safety and Health First.''' KSC's number one goal is to '''Assure sound, safe and efficient practices and processes are in place for privatized/commercialized launch site processing.'''

Super Safety and Health Day at KSC

NASA Technical Reports Server (NTRS)

2000-01-01

Center Director Roy Bridges talks to workers outside the Hazardous Maintenance Facility during Super Safety and Health Day at KSC. Safety Day is a full day of NASA-sponsored, KSC and 45th Space Wing events involving a number of health and safety related activities: Displays, vendors, technical paper sessions, panel discussions, a keynote speaker, etc. The entire Center and Wing stand down to participate in the planned events. Safety Day is held annually to proactively increase awareness in safety and health among the government and contractor workforce population. The first guiding principle at KSC is '''Safety and Health First.''' KSC's number one goal is to '''Assure sound, safe and efficient practices and processes are in place for privatized/commercialized launch site processing.'''

Super Safety and Health Day at KSC

NASA Technical Reports Server (NTRS)

2000-01-01

Employees gather around a demonstration by Florida Power and Light during Super Safety and Health Day at KSC. Safety Day is a full day of NASA-sponsored, KSC and 45th Space Wing events involving a number of health- and safety-related activities: Displays, vendors, technical paper sessions, panel discussions, a keynote speaker, etc. The entire Center and Wing stand down to participate in the planned events. Safety Day is held annually to proactively increase awareness in safety and health among the government and contractor workforce population. The first guiding principle at KSC is '''Safety and Health First.''' KSC's number one goal is to '''Assure sound, safe and efficient practices and processes are in place for privatized/commercialized launch site processing.'''

Super Safety and Health Day at KSC

NASA Technical Reports Server (NTRS)

2000-01-01

In an exhibit tent during Super Safety and Health Day at KSC, employees sample iced tea from a vendor. Safety Day is a full day of NASA-sponsored, KSC and 45th Space Wing events involving a number of health- and safety-related activities: Displays, vendors, technical paper sessions, panel discussions, a keynote speaker, etc. The entire Center and Wing stand down to participate in the planned events. Safety Day is held annually to proactively increase awareness in safety and health among the government and contractor workforce population. The first guiding principle at KSC is '''Safety and Health First.''' KSC's number one goal is to '''Assure sound, safe and efficient practices and processes are in place for privatized/commercialized launch site processing.'''

14 CFR Appendix B of Part 415 - Safety Review Document Outline

Code of Federal Regulations, 2010 CFR

2010-01-01

... Performed by Certified Personnel 4.0Flight Safety (§ 415.115) 4.1Initial Flight Safety Analysis 4.1.1Flight Safety Sub-Analyses, Methods, and Assumptions 4.1.2Sample Calculation and Products 4.1.3 Launch Specific Updates and Final Flight Safety Analysis Data 4.2Radionuclide Data (where applicable) 4.3Flight Safety...

14 CFR Appendix B of Part 415 - Safety Review Document Outline

Code of Federal Regulations, 2012 CFR

2012-01-01

... Performed by Certified Personnel 4.0Flight Safety (§ 415.115) 4.1Initial Flight Safety Analysis 4.1.1Flight Safety Sub-Analyses, Methods, and Assumptions 4.1.2Sample Calculation and Products 4.1.3 Launch Specific Updates and Final Flight Safety Analysis Data 4.2Radionuclide Data (where applicable) 4.3Flight Safety...

14 CFR Appendix B of Part 415 - Safety Review Document Outline

Code of Federal Regulations, 2011 CFR

2011-01-01

... Performed by Certified Personnel 4.0Flight Safety (§ 415.115) 4.1Initial Flight Safety Analysis 4.1.1Flight Safety Sub-Analyses, Methods, and Assumptions 4.1.2Sample Calculation and Products 4.1.3 Launch Specific Updates and Final Flight Safety Analysis Data 4.2Radionuclide Data (where applicable) 4.3Flight Safety...

Loosely Coupled GPS-Aided Inertial Navigation System for Range Safety

NASA Technical Reports Server (NTRS)

Heatwole, Scott; Lanzi, Raymond J.

2010-01-01

The Autonomous Flight Safety System (AFSS) aims to replace the human element of range safety operations, as well as reduce reliance on expensive, downrange assets for launches of expendable launch vehicles (ELVs). The system consists of multiple navigation sensors and flight computers that provide a highly reliable platform. It is designed to ensure that single-event failures in a flight computer or sensor will not bring down the whole system. The flight computer uses a rules-based structure derived from range safety requirements to make decisions whether or not to destroy the rocket.

Super Safety and Health Day at KSC

NASA Technical Reports Server (NTRS)

2000-01-01

Vendor tents and displays filled the grounds in the Industrial Area as well as LC 39 Area during Super Safety and Health Day at KSC. Safety Day is a full day of NASA-sponsored, KSC and 45th Space Wing events involving a number of health and safety related activities: Displays, vendors, technical paper sessions, panel discussions, a keynote speaker, etc. The entire Center and Wing stand down to participate in the planned events. Safety Day is held annually to proactively increase awareness in safety and health among the government and contractor workforce population. The first guiding principle at KSC is '''Safety and Health First.''' KSC's number one goal is to '''Assure sound, safe and efficient practices and processes are in place for privatized/commercialized launch site processing.'''

Space-Based Range Safety and Future Space Range Applications

NASA Technical Reports Server (NTRS)

Whiteman, Donald E.; Valencia, Lisa M.; Simpson, James C.

2005-01-01

The National Aeronautics and Space Administration (NASA) Space-Based Telemetry and Range Safety (STARS) study is a multiphase project to demonstrate the performance, flexibility and cost savings that can be realized by using space-based assets for the Range Safety [global positioning system (GPS) metric tracking data, flight termination command and range safety data relay] and Range User (telemetry) functions during vehicle launches and landings. Phase 1 included flight testing S-band Range Safety and Range User hardware in 2003 onboard a high-dynamic aircraft platform at Dryden Flight Research Center (Edwards, California, USA) using the NASA Tracking and Data Relay Satellite System (TDRSS) as the communications link. The current effort, Phase 2, includes hardware and packaging upgrades to the S-band Range Safety system and development of a high data rate Ku-band Range User system. The enhanced Phase 2 Range Safety Unit (RSU) provided real-time video for three days during the historic Global Flyer (Scaled Composites, Mojave, California, USA) flight in March, 2005. Additional Phase 2 testing will include a sounding rocket test of the Range Safety system and aircraft flight testing of both systems. Future testing will include a flight test on a launch vehicle platform. This paper discusses both Range Safety and Range User developments and testing with emphasis on the Range Safety system. The operational concept of a future space-based range is also discussed.

Space-Based Range Safety and Future Space Range Applications

NASA Technical Reports Server (NTRS)

Whiteman, Donald E.; Valencia, Lisa M.; Simpson, James C.

2005-01-01

The National Aeronautics and Space Administration Space-Based Telemetry and Range Safety study is a multiphase project to demonstrate the performance, flexibility and cost savings that can be realized by using space-based assets for the Range Safety (global positioning system metric tracking data, flight termination command and range safety data relay) and Range User (telemetry) functions during vehicle launches and landings. Phase 1 included flight testing S-band Range Safety and Range User hardware in 2003 onboard a high-dynamic aircraft platform at Dryden Flight Research Center (Edwards, California) using the NASA Tracking and Data Relay Satellite System as the communications link. The current effort, Phase 2, includes hardware and packaging upgrades to the S-band Range Safety system and development of a high data rate Ku-band Range User system. The enhanced Phase 2 Range Safety Unit provided real-time video for three days during the historic GlobalFlyer (Scaled Composites, Mojave, California) flight in March, 2005. Additional Phase 2 testing will include a sounding rocket test of the Range Safety system and aircraft flight testing of both systems. Future testing will include a flight test on a launch vehicle platform. This report discusses both Range Safety and Range User developments and testing with emphasis on the Range Safety system. The operational concept of a future space-based range is also discussed.

A nationwide hospital survey on patient safety culture in Belgian hospitals: setting priorities at the launch of a 5-year patient safety plan.

PubMed

Vlayen, Annemie; Hellings, Johan; Claes, Neree; Peleman, Hilde; Schrooten, Ward

2012-09-01

To measure patient safety culture in Belgian hospitals and to examine the homogeneous grouping of underlying safety culture dimensions. The Hospital Survey on Patient Safety Culture was distributed organisation-wide in 180 Belgian hospitals participating in the federal program on quality and safety between 2007 and 2009. Participating hospitals were invited to submit their data to a comparative database. Homogeneous groups of underlying safety culture dimensions were sought by hierarchical cluster analysis. 90 acute, 42 psychiatric and 11 long-term care hospitals submitted their data for comparison to other hospitals. The benchmark database included 55 225 completed questionnaires (53.7% response rate). Overall dimensional scores were low, although scores were found to be higher for psychiatric and long-term care hospitals than for acute hospitals. The overall perception of patient safety was lower in French-speaking hospitals. Hierarchical clustering of dimensions resulted in two distinct clusters. Cluster I grouped supervisor/manager expectations and actions promoting safety, organisational learning-continuous improvement, teamwork within units and communication openness, while Cluster II included feedback and communication about error, overall perceptions of patient safety, non-punitive response to error, frequency of events reported, teamwork across units, handoffs and transitions, staffing and management support for patient safety. The nationwide safety culture assessment confirms the need for a long-term national initiative to improve patient safety culture and provides each hospital with a baseline patient safety culture profile to direct an intervention plan. The identification of clusters of safety culture dimensions indicates the need for a different approach and context towards the implementation of interventions aimed at improving the safety culture. Certain clusters require unit level improvements, whereas others demand a hospital-wide policy.

Shaping NASA's Kennedy Space Center Safety for the Future

NASA Technical Reports Server (NTRS)

Kirkpatrick, Paul; McDaniel, Laura; Smith, Maynette

2011-01-01

With the completion of the Space Shuttle Program, the Kennedy Space Center (KSC) safety function will be required to evolve beyond the single launch vehicle launch site focus that has held prominence for almost fifty years. This paper will discuss how that evolution is taking place. Specifically, we will discuss the future of safety as it relates to a site that will have multiple, very disparate, functions. These functions will include new business; KSC facilities not under the control of NASA; traditional payload and launch vehicle processing; and, operations conducted by NASA personnel, NASA contractors or a combination of both. A key element in this process is the adaptation of the current KSC set of safety requirements into a multi-faceted set that can address each of the functions above, while maintaining our world class safety environment. One of the biggest challenges that will be addressed is how to protect our personnel and property without dictating how other Non-NASA organizations protect their own employees and property. The past history of KSC Safety will be described and how the lessons learned from previous programs will be applied to the future. The lessons learned from this process will also be discussed as information for other locations that may undergo such a transformation.

Integrating Safety and Mission Assurance in Design

NASA Technical Reports Server (NTRS)

Cianciola, Chris; Crane, Kenneth

2008-01-01

This presentation describes how the Ares Projects are learning from the successes and failures of previous launch systems in order to maximize safety and reliability while maintaining fiscal responsibility. The Ares Projects are integrating Safety and Mission Assurance into design activities and embracing independent assessments by Quality experts in thorough reviews of designs and processes. Incorporating Lean thinking into the design process, Ares is also streamlining existing processes and future manufacturing flows which will yield savings during production. Understanding the value of early involvement of Quality experts, the Ares Projects are leading launch vehicle development into the 21st century.

2010 NASA Range Safety Annual Report

NASA Technical Reports Server (NTRS)

Dumont, Alan G.

2010-01-01

this report provides a NASA Range Safety overview for current and potential range users. This report contains articles which cover a variety of subject areas, summaries of various NASA Range Safety Program activities conducted during the past year, links to past reports, and information on several projects that may have a profound impact on the way business will be done in the future. Specific topics discussed in the 2010 NASA Range Safety Annual Report include a program overview and 2010 highlights; Range Safety Training; Range Safety Policy revision; Independent Assessments; Support to Program Operations at all ranges conducting NASA launch/flight operations; a continuing overview of emerging range safety-related technologies; and status reports from all of the NASA Centers that have Range Safety responsibilities. Every effort has been made to include the most current information available. We recommend this report be used only for guidance and that the validity and accuracy of all articles be verified for updates. Once again, the web-based format was used to present the annual report.

Range Safety for an Autonomous Flight Safety System

NASA Technical Reports Server (NTRS)

Lanzi, Raymond J.; Simpson, James C.

2010-01-01

The Range Safety Algorithm software encapsulates the various constructs and algorithms required to accomplish Time Space Position Information (TSPI) data management from multiple tracking sources, autonomous mission mode detection and management, and flight-termination mission rule evaluation. The software evaluates various user-configurable rule sets that govern the qualification of TSPI data sources, provides a prelaunch autonomous hold-launch function, performs the flight-monitoring-and-termination functions, and performs end-of-mission safing

The Application of Software Safety to the Constellation Program Launch Control System

NASA Technical Reports Server (NTRS)

Kania, James; Hill, Janice

2011-01-01

The application of software safety practices on the LCS project resulted in the successful implementation of the NASA Software Safety Standard NASA-STD-8719.138 and CxP software safety requirements. The GOP-GEN-GSW-011 Hazard Report was the first report developed at KSC to identify software hazard causes and their controls. This approach can be applied to similar large software - intensive systems where loss of control can lead to a hazard.

Achieving the Proper Balance between Crew & Public Safety

NASA Astrophysics Data System (ADS)

Wilde, P.; Gowan, J.; Silvestri, R.; Stahl, B.; Rosati, P.

2012-01-01

A paramount objective of all human-rated launch and reentry vehicle developers is to ensure that the risks to both the crew onboard and the public are minimized within reasonable cost, schedule, and technical constraints. Past experience has shown that proper attention to range safety requirements necessary to ensure public safety must be given early in the design phase to avoid additional operational complexities or threats to the safety of people onboard, and the design engineers must give these requirements the same consideration as crew safety requirements. For human spaceflight, the primary purpose and operational concept for any flight safety system is to protect the public while maximizing the likelihood of crew survival. This paper will outline the policy considerations, technical issues, and operational impacts regarding launch and reentry vehicle failure scenarios where crew and public safety are intertwined and thus addressed optimally in an integrated manner. An overview of existing range and crew safety policy requirements will be presented. Application of these requirements and lessons learned from both the Space Shuttle and Constellation Programs will also be discussed. Using these past programs as examples, the paper will detail operational, design, and analysis approaches to mitigate and balance the risks to people onboard and in the public. Crewed vehicle perspectives from the Federal Aviation Administration and Air Force organizations that oversee public safety will be summarized as well. Finally, the paper will emphasize the need to factor policy, operational, and analysis considerations into the early design trades of new vehicles to help ensure that both crew and public safety are maximized to the greatest extent possible.

Implementing instructions for KSC systems and safety training

NASA Technical Reports Server (NTRS)

1973-01-01

The requirements for the safety training program are reported for KSC including transportation, inspection, checkout operations, maintenance of launch vehicles, spacecraft, ground support equipment, and launch teams. The responsibilities and mechanics for implementing the program are outlined.

Evolution of Safety Analysis to Support New Exploration Missions

NASA Technical Reports Server (NTRS)

Thrasher, Chard W.

2008-01-01

NASA is currently developing the Ares I launch vehicle as a key component of the Constellation program which will provide safe and reliable transportation to the International Space Station, back to the moon, and later to Mars. The risks and costs of the Ares I must be significantly lowered, as compared to other manned launch vehicles, to enable the continuation of space exploration. It is essential that safety be significantly improved, and cost-effectively incorporated into the design process. This paper justifies early and effective safety analysis of complex space systems. Interactions and dependences between design, logistics, modeling, reliability, and safety engineers will be discussed to illustrate methods to lower cost, reduce design cycles and lessen the likelihood of catastrophic events.

Safety aspects of nuclear waste disposal in space

NASA Technical Reports Server (NTRS)

Rice, E. E.; Edgecombe, D. S.; Compton, P. R.

1981-01-01

Safety issues involved in the disposal of nuclear wastes in space as a complement to mined geologic repositories are examined as part of an assessment of the feasibility of nuclear waste disposal in space. General safety guidelines for space disposal developed in the areas of radiation exposure and shielding, containment, accident environments, criticality, post-accident recovery, monitoring systems and isolation are presented for a nuclear waste disposal in space mission employing conventional space technology such as the Space Shuttle. The current reference concept under consideration by NASA and DOE is then examined in detail, with attention given to the waste source and mix, the waste form, waste processing and payload fabrication, shipping casks and ground transport vehicles, launch site operations and facilities, Shuttle-derived launch vehicle, orbit transfer vehicle, orbital operations and space destination, and the system safety aspects of the concept are discussed for each component. It is pointed out that future work remains in the development of an improved basis for the safety guidelines and the determination of the possible benefits and costs of the space disposal option for nuclear wastes.

Achieving the Proper Balance Between Crew and Public Safety

NASA Technical Reports Server (NTRS)

Gowan, John; Rosati, Paul; Silvestri, Ray; Stahl, Ben; Wilde, Paul

2011-01-01

A paramount objective of all human-rated launch and reentry vehicle developers is to ensure that the risks to both the crew onboard and the public are minimized within reasonable cost, schedule, and technical constraints. Past experience has shown that proper attention to range safety requirements necessary to ensure public safety must be given early in the design phase to avoid additional operational complexities or threats to the safety of people onboard. This paper will outline the policy considerations, technical issues, and operational impacts regarding launch and reentry vehicle failure scenarios where crew and public safety are intertwined and thus addressed optimally in an integrated manner. Historical examples and lessons learned from both the Space Shuttle and Constellation Programs will be presented. Using these examples as context, the paper will discuss some operational, design, and analysis approaches to mitigate and balance the risks to people onboard and in the public. Manned vehicle perspectives from the FAA and Air Force organizations that oversee public safety will also be summarized. Finally, the paper will emphasize the need to factor policy, operational, and analysis considerations into the early design trades of new vehicles to help ensure that both crew and public safety are maximized to the greatest extent possible.

Super Safety and Health Day at KSC

NASA Technical Reports Server (NTRS)

2000-01-01

During Super Safety and Health Day at KSC, two employees were recognized for submitting winning entries in the theme and logo/poster contests. At left, Center Director Roy Bridges congratulates Dave Earhart with United Space Alliance (USA) for his winning logo; at right, Brig. Gen. Ronald D. Pettit congratulates David Koval with Space Gateway Support (SGS) for his winning theme, '''Safety and Health: A Working Relationship.''' Safety Day is a full day of NASA-sponsored, KSC and 45th Space Wing events involving a number of health and safety related activities: Displays, vendors, technical paper sessions, panel discussions, a keynote speaker, etc. The entire Center and Wing stand down to participate in the planned events. Safety Day is held annually to proactively increase awareness in safety and health among the government and contractor workforce population. The first guiding principle at KSC is '''Safety and Health First.''' KSC's number one goal is to '''Assure sound, safe and efficient practices and processes are in place for privatized/commercialized launch site processing.'''

Hard and Soft Safety Verifications

NASA Technical Reports Server (NTRS)

Wetherholt, Jon; Anderson, Brenda

2012-01-01

The purpose of this paper is to examine the differences between and the effects of hard and soft safety verifications. Initially, the terminology should be defined and clarified. A hard safety verification is datum which demonstrates how a safety control is enacted. An example of this is relief valve testing. A soft safety verification is something which is usually described as nice to have but it is not necessary to prove safe operation. An example of a soft verification is the loss of the Solid Rocket Booster (SRB) casings from Shuttle flight, STS-4. When the main parachutes failed, the casings impacted the water and sank. In the nose cap of the SRBs, video cameras recorded the release of the parachutes to determine safe operation and to provide information for potential anomaly resolution. Generally, examination of the casings and nozzles contributed to understanding of the newly developed boosters and their operation. Safety verification of SRB operation was demonstrated by examination for erosion or wear of the casings and nozzle. Loss of the SRBs and associated data did not delay the launch of the next Shuttle flight.

Case study: the Argentina Road Safety Project: lessons learned for the decade of action for road safety, 2011-2020.

PubMed

Raffo, Veronica; Bliss, Tony; Shotten, Marc; Sleet, David; Blanchard, Claire

2013-12-01

This case study of the Argentina Road Safety Project demonstrates how the application of World Bank road safety project guidelines focused on institution building can accelerate knowledge transfer, scale up investment and improve the focus on results. The case study highlights road safety as a development priority and outlines World Bank initiatives addressing the implementation of the World Report on Road Traffic Injury's recommendations and the subsequent launch of the Decade of Action for Road Safety, from 2011-2020. The case study emphasizes the vital role played by the lead agency in ensuring sustainable road safety improvements and promoting the shift to a 'Safe System' approach, which necessitated the strengthening of all elements of the road safety management system. It summarizes road safety performance and institutional initiatives in Argentina leading up to the preparation and implementation of the project. We describe the project's development objectives, financing arrangements, specific components and investment staging. Finally, we discuss its innovative features and lessons learned, and present a set of supplementary guidelines, both to assist multilateral development banks and their clients with future road safety initiatives, and to encourage better linkages between the health and transportation sectors supporting them.

Safety And Promotion in the Federal Aviation Administration- Enabling Safe and Successful Commercial Space Transportation

NASA Astrophysics Data System (ADS)

Repcheck, Randall J.

2010-09-01

The United States Federal Aviation Administration’s Office of Commercial Space Transportation(AST) authorizes the launch and reentry of expendable and reusable launch vehicles and the operation of launch and reentry sites by United States citizens or within the United States. It authorizes these activities consistent with public health and safety, the safety of property, and the national security and foreign policy interests of the United States. In addition to its safety role, AST has the role to encourage, facilitate, and promote commercial space launches and reentries by the private sector. AST’s promotional role includes, among other things, the development of information of interest to industry, the sharing of information of interest through a variety of methods, and serving as an advocate for Commercial Space Transportation within the United States government. This dual safety and promotion role is viewed by some as conflicting. AST views these two roles as complementary, and important for the current state of commercial space transportation. This paper discusses how maintaining a sound safety decision-making process, maintaining a strong safety culture, and taking steps to avoid complacency can together enable safe and successful commercial space transportation.

Achieving the Proper Balance Between Crew and Public Safety

NASA Technical Reports Server (NTRS)

Gowan, John; Silvestri, Ray; Stahl, Ben; Rosati, Paul; Wilde, Paul

2011-01-01

A paramount objective of all human-rated launch and reentry vehicle developers is to ensure that the risks to both the crew onboard and the public are minimized within reasonable cost, schedule, and technical constraints. Past experience has shown that proper attention to range safety requirements necessary to ensure public safety must be given early in the design phase to avoid additional operational complexities or threats to the safety of people onboard, and the design engineers must give these requirements the same consideration as crew safety requirements. For human spaceflight, the primary purpose and operational concept for any flight safety system is to protect the public while maximizing the likelihood of crew survival. This paper will outline the policy considerations, technical issues, and operational impacts regarding launch and reentry vehicle failure scenarios where crew and public safety are intertwined and thus addressed optimally in an integrated manner. An overview of existing range and crew safety policy requirements will be presented. Application of these requirements and lessons learned from both the Space Shuttle and Constellation Programs will also be discussed. Using these past programs as examples, the paper will detail operational, design, and analysis approaches to mitigate and balance the risks to people onboard and in the public. Manned vehicle perspectives from the Federal Aviation Administration (FAA) and Air Force organizations that oversee public safety will be summarized as well. Finally, the paper will emphasize the need to factor policy, operational, and analysis considerations into the early design trades of new vehicles to help ensure that both crew and public safety are maximized to the greatest extent possible.

Aerospace Safety Advisory Panel

NASA Technical Reports Server (NTRS)

1999-01-01

This report covers the activities of the Aerospace Safety Advisory Panel (ASAP) for calendar year 1998-a year of sharp contrasts and significant successes at NASA. The year opened with the announcement of large workforce cutbacks. The slip in the schedule for launching the International Space Station (ISS) created a five-month hiatus in Space Shuttle launches. This slack period ended with the successful and highly publicized launch of the STS-95 mission. As the year closed, ISS assembly began with the successful orbiting and joining of the Functional Cargo Block (FGB), Zarya, from Russia and the Unity Node from the United States. Throughout the year, the Panel maintained its scrutiny of NASA's safety processes. Of particular interest were the potential effects on safety of workforce reductions and the continued transition of functions to the Space Flight Operations Contractor. Attention was also given to the risk management plans of the Aero-Space Technology programs, including the X-33, X-34, and X-38. Overall, the Panel concluded that safety is well served for the present. The picture is not as clear for the future. Cutbacks have limited the depth of talent available. In many cases, technical specialties are 'one deep.' The extended hiring freeze has resulted in an older workforce that will inevitably suffer significant departures from retirements in the near future. The resulting 'brain drain' could represent a future safety risk unless appropriate succession planning is started expeditiously. This and other topics are covered in the section addressing workforce. The major NASA programs are also limited in their ability to plan property for the future. This is of particular concern for the Space Shuttle and ISS because these programs are scheduled to operate well into the next century. In the case of the Space Shuttle, beneficial and mandatory safety and operational upgrades are being delayed because of a lack of sufficient present funding. Likewise, the ISS has

NASA ELV Payload Safety Program Information Exchange

NASA Technical Reports Server (NTRS)

Staubus, Cal; Palo, Tom; Dook, Mike; Donovan, Shawn

2007-01-01

This presentation details the Expendable Launch Vehicle (ELV) Payload Safety Program in its development and plan for implementation. It is an overview of the program's policies, process and requirements.

Seniors' perceptions of vehicle safety risks and needs.

PubMed

Shaw, Lynn; Polgar, Jan Miller; Vrkljan, Brenda; Jacobson, Jill

2010-01-01

The investigation of vehicle safety needs for older drivers and passengers is integral for their safe transportation. A program of research on safe transportation for seniors was launched through AUTO21, a Canadian Network of Centres of Excellence. This national research network focuses on a wide range of automotive issues, from materials and design to safety and societal issues. An inductive qualitative inquiry of seniors' driving experiences, safety feature use, and strategies to prevent injury and manage risks was a first step in this program. We conducted interviews and focus groups with 58 seniors without disabilities and 9 seniors with disabilities. We identified a lack of congruity between the vehicle and safety feature design and seniors' needs. Seniors described strategies to manage their safety and that of others. Specific aspects of vehicle design, safety features, and action strategies that support safer use and operation of a vehicle by seniors are outlined.

Safety on Earth From MARSS

NASA Technical Reports Server (NTRS)

2002-01-01

ENSCO, Inc., developed the Meteorological and Atmospheric Real-time Safety Support (MARSS) system for real-time assessment of meteorological data displays and toxic material spills. MARSS also provides mock scenarios to guide preparations for emergencies involving meteorological hazards and toxic substances. Developed under a Small Business Innovation Research (SBIR) contract with Kennedy Space Center, MARSS was designed to measure how safe NASA and Air Force range safety personnel are while performing weather sensitive operations around launch pads. The system augments a ground operations safety plan that limits certain work operations to very specific weather conditions. It also provides toxic hazard prediction models to assist safety managers in planning for and reacting to releases of hazardous materials. MARSS can be used in agricultural, industrial, and scientific applications that require weather forecasts and predictions of toxic smoke movement. MARSS is also designed to protect urban areas, seaports, rail facilities, and airports from airborne releases of hazardous chemical substances. The system can integrate with local facility protection units and provide instant threat detection and assessment data that is reportable for local and national distribution.

Manned space flight nuclear system safety. Volume 1: base nuclear system safety

NASA Technical Reports Server (NTRS)

1972-01-01

The mission and terrestrial nuclear safety aspects of future long duration manned space missions in low earth orbit are discussed. Nuclear hazards of a typical low earth orbit Space Base mission (from natural sources and on-board nuclear hardware) have been identified and evaluated. Some of the principal nuclear safety design and procedural considerations involved in launch, orbital, and end of mission operations are presented. Areas of investigation include radiation interactions with the crew, subsystems, facilities, experiments, film, interfacing vehicles, nuclear hardware and the terrestrial populace. Results of the analysis indicate: (1) the natural space environment can be the dominant radiation source in a low earth orbit where reactors are effectively shielded, (2) with implementation of safety guidelines the reactor can present a low risk to the crew, support personnel, the terrestrial populace, flight hardware and the mission, (3) ten year missions are feasible without exceeding integrated radiation limits assigned to flight hardware, and (4) crew stay-times up to one year are feasible without storm shelter provisions.

The Role of Probabilistic Design Analysis Methods in Safety and Affordability

NASA Technical Reports Server (NTRS)

Safie, Fayssal M.

2016-01-01

For the last several years, NASA and its contractors have been working together to build space launch systems to commercialize space. Developing commercial affordable and safe launch systems becomes very important and requires a paradigm shift. This paradigm shift enforces the need for an integrated systems engineering environment where cost, safety, reliability, and performance need to be considered to optimize the launch system design. In such an environment, rule based and deterministic engineering design practices alone may not be sufficient to optimize margins and fault tolerance to reduce cost. As a result, introduction of Probabilistic Design Analysis (PDA) methods to support the current deterministic engineering design practices becomes a necessity to reduce cost without compromising reliability and safety. This paper discusses the importance of PDA methods in NASA's new commercial environment, their applications, and the key role they can play in designing reliable, safe, and affordable launch systems. More specifically, this paper discusses: 1) The involvement of NASA in PDA 2) Why PDA is needed 3) A PDA model structure 4) A PDA example application 5) PDA link to safety and affordability.

Watershed safety and quality control by safety threshold method

NASA Astrophysics Data System (ADS)

Da-Wei Tsai, David; Mengjung Chou, Caroline; Ramaraj, Rameshprabu; Liu, Wen-Cheng; Honglay Chen, Paris

2014-05-01

Taiwan was warned as one of the most dangerous countries by IPCC and the World Bank. In such an exceptional and perilous island, we would like to launch the strategic research of land-use management on the catastrophe prevention and environmental protection. This study used the watershed management by "Safety Threshold Method" to restore and to prevent the disasters and pollution on island. For the deluge prevention, this study applied the restoration strategy to reduce total runoff which was equilibrium to 59.4% of the infiltration each year. For the sediment management, safety threshold management could reduce the sediment below the equilibrium of the natural sediment cycle. In the water quality issues, the best strategies exhibited the significant total load reductions of 10% in carbon (BOD5), 15% in nitrogen (nitrate) and 9% in phosphorus (TP). We found out the water quality could meet the BOD target by the 50% peak reduction with management. All the simulations demonstrated the safety threshold method was helpful to control the loadings within the safe range of disasters and environmental quality. Moreover, from the historical data of whole island, the past deforestation policy and the mistake economic projects were the prime culprits. Consequently, this study showed a practical method to manage both the disasters and pollution in a watershed scale by the land-use management.

NASA's Software Safety Standard

NASA Technical Reports Server (NTRS)

Ramsay, Christopher M.

2007-01-01

NASA relies more and more on software to control, monitor, and verify its safety critical systems, facilities and operations. Since the 1960's there has hardly been a spacecraft launched that does not have a computer on board that will provide command and control services. There have been recent incidents where software has played a role in high-profile mission failures and hazardous incidents. For example, the Mars Orbiter, Mars Polar Lander, the DART (Demonstration of Autonomous Rendezvous Technology), and MER (Mars Exploration Rover) Spirit anomalies were all caused or contributed to by software. The Mission Control Centers for the Shuttle, ISS, and unmanned programs are highly dependant on software for data displays, analysis, and mission planning. Despite this growing dependence on software control and monitoring, there has been little to no consistent application of software safety practices and methodology to NASA's projects with safety critical software. Meanwhile, academia and private industry have been stepping forward with procedures and standards for safety critical systems and software, for example Dr. Nancy Leveson's book Safeware: System Safety and Computers. The NASA Software Safety Standard, originally published in 1997, was widely ignored due to its complexity and poor organization. It also focused on concepts rather than definite procedural requirements organized around a software project lifecycle. Led by NASA Headquarters Office of Safety and Mission Assurance, the NASA Software Safety Standard has recently undergone a significant update. This new standard provides the procedures and guidelines for evaluating a project for safety criticality and then lays out the minimum project lifecycle requirements to assure the software is created, operated, and maintained in the safest possible manner. This update of the standard clearly delineates the minimum set of software safety requirements for a project without detailing the implementation for those

Nuclear safety for the space exploration initiative

NASA Technical Reports Server (NTRS)

Dix, Terry E.

1991-01-01

The results of a study to identify potential hazards arising from nuclear reactor power systems for use on the lunar and Martian surfaces, related safety issues, and resolutions of such issues by system design changes, operating procedures, and other means are presented. All safety aspects of nuclear reactor power systems from prelaunch ground handling to eventual disposal were examined consistent with the level of detail for SP-100 reactor design at the 1988 System Design Review and for launch vehicle and space transport vehicle designs and mission descriptions as defined in the 90-day Space Exploration Initiative (SEI) study. Information from previous aerospace nuclear safety studies was used where appropriate. Safety requirements for the SP-100 space nuclear reactor system were compiled. Mission profiles were defined with emphasis on activities after low earth orbit insertion. Accident scenarios were then qualitatively defined for each mission phase. Safety issues were identified for all mission phases with the aid of simplified event trees. Safety issue resolution approaches of the SP-100 program were compiled. Resolution approaches for those safety issues not covered by the SP-100 program were identified. Additionally, the resolution approaches of the SP-100 program were examined in light of the moon and Mars missions.

System safety education focused on flight safety

NASA Technical Reports Server (NTRS)

Holt, E.

1971-01-01

The measures necessary for achieving higher levels of system safety are analyzed with an eye toward maintaining the combat capability of the Air Force. Several education courses were provided for personnel involved in safety management. Data include: (1) Flight Safety Officer Course, (2) Advanced Safety Program Management, (3) Fundamentals of System Safety, and (4) Quantitative Methods of Safety Analysis.

Food Safety, Farm to Fork.

ERIC Educational Resources Information Center

Jones, Rebecca

1998-01-01

In response to growing threat of food-borne illness, the federal government launched the Food Safety Initiative. A key element is the Hazard Analysis Critical Control Points system (HACCP), designed to make everyone in the food-delivery chain responsible for ensuring a safe food supply. The Food and Drug Administration also announced a beef…

14 CFR Appendix J to Part 417 - Ground Safety Analysis Report

Code of Federal Regulations, 2014 CFR

2014-01-01

... information required by this appendix. J417.3Ground safety analysis report chapters (a) Introduction. A ground... analysis report must include a chapter that provides detailed safety information about each launch vehicle... data. A hazard analysis form must contain or reference all information necessary to understand the...

14 CFR Appendix J to Part 417 - Ground Safety Analysis Report

Code of Federal Regulations, 2013 CFR

2013-01-01

... information required by this appendix. J417.3Ground safety analysis report chapters (a) Introduction. A ground... analysis report must include a chapter that provides detailed safety information about each launch vehicle... data. A hazard analysis form must contain or reference all information necessary to understand the...

14 CFR Appendix J to Part 417 - Ground Safety Analysis Report

Code of Federal Regulations, 2010 CFR

2010-01-01

... information required by this appendix. J417.3Ground safety analysis report chapters (a) Introduction. A ground... analysis report must include a chapter that provides detailed safety information about each launch vehicle... data. A hazard analysis form must contain or reference all information necessary to understand the...

14 CFR Appendix J to Part 417 - Ground Safety Analysis Report

Code of Federal Regulations, 2011 CFR

2011-01-01

... information required by this appendix. J417.3Ground safety analysis report chapters (a) Introduction. A ground... analysis report must include a chapter that provides detailed safety information about each launch vehicle... data. A hazard analysis form must contain or reference all information necessary to understand the...

14 CFR Appendix J to Part 417 - Ground Safety Analysis Report

Code of Federal Regulations, 2012 CFR

2012-01-01

... information required by this appendix. J417.3Ground safety analysis report chapters (a) Introduction. A ground... analysis report must include a chapter that provides detailed safety information about each launch vehicle... data. A hazard analysis form must contain or reference all information necessary to understand the...

ELECTRA © Launch and Re-Entry Safety Analysis Tool

NASA Astrophysics Data System (ADS)

Lazare, B.; Arnal, M. H.; Aussilhou, C.; Blazquez, A.; Chemama, F.

2010-09-01

French Space Operation Act gives as prime objective to National Technical Regulations to protect people, properties, public health and environment. In this frame, an independent technical assessment of French space operation is delegated to CNES. To perform this task and also for his owns operations CNES needs efficient state-of-the-art tools for evaluating risks. The development of the ELECTRA© tool, undertaken in 2007, meets the requirement for precise quantification of the risks involved in launching and re-entry of spacecraft. The ELECTRA© project draws on the proven expertise of CNES technical centers in the field of flight analysis and safety, spaceflight dynamics and the design of spacecraft. The ELECTRA© tool was specifically designed to evaluate the risks involved in the re-entry and return to Earth of all or part of a spacecraft. It will also be used for locating and visualizing nominal or accidental re-entry zones while comparing them with suitable geographic data such as population density, urban areas, and shipping lines, among others. The method chosen for ELECTRA© consists of two main steps: calculating the possible reentry trajectories for each fragment after the spacecraft breaks up; calculating the risks while taking into account the energy of the fragments, the population density and protection afforded by buildings. For launch operations and active re-entry, the risk calculation will be weighted by the probability of instantaneous failure of the spacecraft and integrated for the whole trajectory. ELECTRA©’s development is today at the end of the validation phase, last step before delivery to users. Validation process has been performed in different ways: numerical application way for the risk formulation; benchmarking process for casualty area, level of energy of the fragments entries and level of protection housing module; best practices in space transportation industries concerning dependability evaluation; benchmarking process for

Labor unions and safety climate: perceived union safety values and retail employee safety outcomes.

PubMed

Sinclair, Robert R; Martin, James E; Sears, Lindsay E

2010-09-01

Although trade unions have long been recognized as a critical advocate for employee safety and health, safety climate research has not paid much attention to the role unions play in workplace safety. We proposed a multiple constituency model of workplace safety which focused on three central safety stakeholders: top management, ones' immediate supervisor, and the labor union. Safety climate research focuses on management and supervisors as key stakeholders, but has not considered whether employee perceptions about the priority their union places on safety contributes contribute to safety outcomes. We addressed this gap in the literature by investigating unionized retail employee (N=535) perceptions about the extent to which their top management, immediate supervisors, and union valued safety. Confirmatory factor analyses demonstrated that perceived union safety values could be distinguished from measures of safety training, workplace hazards, top management safety values, and supervisor values. Structural equation analyses indicated that union safety values influenced safety outcomes through its association with higher safety motivation, showing a similar effect as that of supervisor safety values. These findings highlight the need for further attention to union-focused measures related to workplace safety as well as further study of retail employees in general. We discuss the practical implications of our findings and identify several directions for future safety research. 2009 Elsevier Ltd. All rights reserved.

Lessons learned from the Galileo and Ulysses flight safety review experience

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennett, Gary L.

In preparation for the launches of the Galileo and Ulysses spacecraft, a very comprehensive aerospace nuclear safety program and flight safety review were conducted. A review of this work has highlighted a number of important lessons which should be considered in the safety analysis and review of future space nuclear systems. These lessons have been grouped into six general categories: (1) establishment of the purpose, objectives and scope of the safety process; (2) establishment of charters defining the roles of the various participants; (3) provision of adequate resources; (4) provision of timely peer-reviewed information to support the safety program; (5)more » establishment of general ground rules for the safety review; and (6) agreement on the kinds of information to be provided from the safety review process.« less

Subsurface safety valves: safety asset or safety liability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Busch, J.M.; Llewelyn, D.C.G.; Policky, B.J.

1983-10-01

This paper summarizes the methods used to compare the risk of a blowout for a well completed with a subsurface safety valve (SSSV) vs. a completion without an SSSV. These methods, which could be applied to any field, include a combination of SSSV reliability and conventional risk analyses. The Kuparuk River Unit Working Interest Owners recently formed a group to examine the risks associated with installing and maintaining SSSV's in the Kuparuk field. The group was charged with answering the question: ''Assuming Kuparuk field operating conditions, are SSSV's a safety asset, or do numerous operating and maintenance procedures make themmore » a safety liability.'' The results indicate that for the Kuparuk River Unit, an SSSV becomes a safety liability when the mean time between SSSV failures is less than one year. Since current SSSV mean time to failure (MTTF) at Kuparuk is approximately 1000 days, they are considered a safety asset.« less

Safety evaluation of phytosterol-esters. Part 9: Results of a European post-launch monitoring programme.

PubMed

Lea, L J; Hepburn, P A

2006-08-01

Phytosterol-esters were developed by Unilever as a cholesterol lowering novel food ingredient for use initially in vegetable oil spreads. In addition to an extensive package of safety studies and clinical studies a programme of post-launch monitoring (PLM) was developed. PLM was used to address the following questions: (a) Is the product use as predicted/recommended? (b) Are the known effects as predicted? (c) Does the product cause unexpected health effects? The overall conclusions from the PLM programme were: the product is being bought by the target population but intakes are less than the original assumptions made in the risk assessment; long-term use of phytosterol-ester enriched spreads results in a reduction in the serum levels of the most lipophilic carotenoids but at current levels of intake this is unlikely to result in reductions in carotenoids that are of biological significance; evaluation of health related consumer complaints have not indicated any unexpected health effects associated with the use of the product in the marketplace. As part of the European approval under Regulation (EC) No. 258/97 on Novel Foods and Food Ingredients the results of the PLM programme had to be submitted to the European Commission (EC) and reviewed by the Scientific Committee on Food (SCF). They concluded that the study provided valuable information, which complemented the pre-market safety evaluation studies, and that the EC mandatory requirement had been met.

Autonomous Flight Safety System Road Test

NASA Technical Reports Server (NTRS)

Simpson, James C.; Zoemer, Roger D.; Forney, Chris S.

2005-01-01

On February 3, 2005, Kennedy Space Center (KSC) conducted the first Autonomous Flight Safety System (AFSS) test on a moving vehicle -- a van driven around the KSC industrial area. A subset of the Phase III design was used consisting of a single computer, GPS receiver, and UPS antenna. The description and results of this road test are described in this report.AFSS is a joint KSC and Wallops Flight Facility project that is in its third phase of development. AFSS is an independent subsystem intended for use with Expendable Launch Vehicles that uses tracking data from redundant onboard sensors to autonomously make flight termination decisions using software-based rules implemented on redundant flight processors. The goals of this project are to increase capabilities by allowing launches from locations that do not have or cannot afford extensive ground-based range safety assets, to decrease range costs, and to decrease reaction time for special situations.

Hand Safety

MedlinePlus

... Lawnmower Safety Snowblower safety Pumpkin Carving Gardening Safety Turkey Carving Removing a Ring Fireworks Safety Español Artritis ... Lawnmower Safety Snowblower safety Pumpkin Carving Gardening Safety Turkey Carving Removing a Ring Fireworks Safety Español Artritis ...

2011 NASA Range Safety Annual Report

NASA Technical Reports Server (NTRS)

Dumont, Alan G.

2012-01-01

Welcome to the 2011 edition of the NASA Range Safety Annual Report. Funded by NASA Headquarters, this report provides a NASA Range Safety overview for current and potential range users. As is typical with odd year editions, this is an abbreviated Range Safety Annual Report providing updates and links to full articles from the previous year's report. It also provides more complete articles covering new subject areas, summaries of various NASA Range Safety Program activities conducted during the past year, and information on several projects that may have a profound impact on the way business will be done in the future. Specific topics discussed and updated in the 2011 NASA Range Safety Annual Report include a program overview and 2011 highlights; Range Safety Training; Range Safety Policy revision; Independent Assessments; Support to Program Operations at all ranges conducting NASA launch/flight operations; a continuing overview of emerging range safety-related technologies; and status reports from all of the NASA Centers that have Range Safety responsibilities. Every effort has been made to include the most current information available. We recommend this report be used only for guidance and that the validity and accuracy of all articles be verified for updates. Once again the web-based format was used to present the annual report. We continually receive positive feedback on the web-based edition and hope you enjoy this year's product as well. As is the case each year, contributors to this report are too numerous to mention, but we thank individuals from the NASA Centers, the Department of Defense, and civilian organizations for their contributions. In conclusion, it has been a busy and productive year. I'd like to extend a personal Thank You to everyone who contributed to make this year a successful one, and I look forward to working with all of you in the upcoming year.

33 CFR 165.721 - Safety Zone: St. Johns River, Jacksonville, FL.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Safety Zone: St. Johns River... Zone: St. Johns River, Jacksonville, FL. (a) Location. The following area is established as a safety... barges during the storage, preparation, and launching of fireworks in the St. Johns River between the...

Application of the Life Safety Code to a Historic Test Stand

NASA Technical Reports Server (NTRS)

Askins, Bruce; Lemke, Paul R.; Lewis, William L.; Covell, Carol C.

2011-01-01

NASA has conducted a study to assess alternatives to refurbishing existing launch vehicle modal test facilities as opposed to developing new test facilities to meet the demands of a very fiscally constrained test and evaluation environment. The results of this study showed that Marshall Space Flight Center (MSFC) Test Stand (TS) 4550 could be made compliant, within reasonable cost and schedule impacts, if safety processes and operational limitations were put in place to meet the safety codes and concerns of the Fire Marshall. Trades were performed with key selection criteria to ensure that appropriate levels of occupant safety are incorporated into test facility design modifications. In preparation for the ground vibration tests that were to be performed on the Ares I launch vehicle, the Ares Flight and Integrated Test Office (FITO) organization evaluated the available test facility options, which included the existing mothballed structural dynamic TS4550 used by Apollo and Shuttle, alternative ground vibration test facilities at other locations, and construction of a new dynamic test stand. After an exhaustive assessment of the alternatives, the results favored modifying the TS4550 because it was the lowest cost option and presented the least schedule risk to the NASA Constellation Program for Ares Integrated Vehicle Ground Vibration Test (IVGVT). As the renovation design plans and drawings were being developed for TS4550, a safety concern was discovered the original design for the construction of the test stand, originally built for the Apollo Program and renovated for the Shuttle Program, was completed before NASA s adoption of the currently imposed safety and building codes per National Fire Protection Association Life Safety Code [NFPA 101] and International Building Codes. The initial FITO assessment of the design changes, required to make TS4550 compliant with current safety and building standards, identified a significant cost increase and schedule impact

Aerospace Safety Advisory Panel Annual Report for 1999

NASA Technical Reports Server (NTRS)

Blomberg, Richard D.

2000-01-01

This report covers the activities of the Aerospace Safety Advisory Panel (ASAP) for the calendar year 1999.This was a year of notable achievements and significant frustrations. Both the Space Shuttle and International Space Station (ISS) programs were delayed.The Space Shuttle prudently postponed launches after the occurrence of a wiring short during ascent of the STS-93 mission. The ISS construction schedule slipped as a result of the Space Shuttle delays and problems the Russians experienced in readying the Service Module and its launch vehicle. Each of these setbacks was dealt with in a constructive way. The STS-93 short circuit led to detailed wiring inspections and repairs on all four orbiters as well as analysis of other key subsystems for similar types of hidden damage. The ISS launch delays afforded time for further testing, training, development, and contingency planning. The safety consciousness of the NASA and contractor workforces, from hands-on labor to top management, continues high. Nevertheless, workforce issues remain among the most serious safety concerns of the Panel. Cutbacks and reorganizations over the past several years have resulted in problems related to workforce size, critical skills, and the extent of on-the-job experience. These problems have the potential to impact safety as the Space Shuttle launch rate increases to meet the demands of the ISS and its other customers. As with last year's report, these work- force-related issues were considered of sufficient import to place them first in the material that follows. Some of the same issues of concern for the Space Shuttle and ISS arose in a review of the launch vehicle for the Terra mission that the Panel was asked by NASA to undertake. Other areas the Panel was requested to assess included the readiness of the Inertial Upper Stage for the deployment of the Chandra X-ray Observatory and the possible safety impact of electromagnetic effects on the Space Shuttle. The findings and

Highway Safety Program Manual: Volume 14: Pedestrian Safety.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 14 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on pedestrian safety. The purpose and objectives of a pedestrian safety program are outlined. Federal authority in the area of pedestrian safety and policies regarding a safety program…

Test plan and report for Space Shuttle launch environment testing of Bergen cable technology safety cable

NASA Technical Reports Server (NTRS)

Ralph, John

1992-01-01

Bergen Cable Technology (BCT) has introduced a new product they refer to as 'safety cable'. This product is intended as a replacement for lockwire when installed per Aerospace Standard (AS) 4536 (included in Appendix D of this document). Installation of safety cable is reportedly faster and more uniform than lockwire. NASA/GSFC proposes to use this safety cable in Shuttle Small Payloads Project (SSPP) applications on upcoming Shuttle missions. To assure that BCT safety cable will provide positive locking of fasteners equivalent to lockwire, the SSPP will conduct vibration and pull tests of the safety cable.

Manned space flight nuclear system safety. Volume 3: Reactor system preliminary nuclear safety analysis. Part 1: Reference Design Document (RDD)

NASA Technical Reports Server (NTRS)

1972-01-01

The Reference Design Document, of the Preliminary Safety Analysis Report (PSAR) - Reactor System provides the basic design and operations data used in the nuclear safety analysis of the Rector Power Module as applied to a Space Base program. A description of the power module systems, facilities, launch vehicle and mission operations, as defined in NASA Phase A Space Base studies is included. Each of two Zirconium Hydride Reactor Brayton power modules provides 50 kWe for the nominal 50 man Space Base. The INT-21 is the prime launch vehicle. Resupply to the 500 km orbit over the ten year mission is provided by the Space Shuttle. At the end of the power module lifetime (nominally five years), a reactor disposal system is deployed for boost into a 990 km high altitude (long decay time) earth orbit.

Aerospace safety advisory panel

NASA Technical Reports Server (NTRS)

1995-01-01

The Aerospace Safety Advisory Panel (ASAP) monitored NASA's activities and provided feedback to the NASA Administrator, other NASA officials and Congress throughout the year. Particular attention was paid to the Space Shuttle, its launch processing and planned and potential safety improvements. The Panel monitored Space Shuttle processing at the Kennedy Space Center (KSC) and will continue to follow it as personnel reductions are implemented. There is particular concern that upgrades in hardware, software, and operations with the potential for significant risk reduction not be overlooked due to the extraordinary budget pressures facing the agency. The authorization of all of the Space Shuttle Main Engine (SSME) Block II components portends future Space Shuttle operations at lower risk levels and with greater margins for handling unplanned ascent events. Throughout the year, the Panel attempted to monitor the safety activities related to the Russian involvement in both space and aeronautics programs. This proved difficult as the working relationships between NASA and the Russians were still being defined as the year unfolded. NASA's concern for the unique safety problems inherent in a multi-national endeavor appears appropriate. Actions are underway or contemplated which should be capable of identifying and rectifying problem areas. The balance of this report presents 'Findings and Recommendations' (Section 2), 'Information in Support of Findings and Recommendations' (Section 3) and Appendices describing Panel membership, the NASA response to the March 1994 ASAP report, and a chronology of the panel's activities during the reporting period (Section 4).

Quality and Safety Matter

NASA Astrophysics Data System (ADS)

Manha, William D.

2010-09-01

One to the expressions for the most demanding quality was made by a well-known rocket scientist, for which this center was named, Dr. Wernher Von Braun in the Foreword of a book about the design of rocket engines that was first published by NASA in 1967: “Success in space demands perfection. Many of the brilliant achievements made in this vast, austere environment seem almost miraculous. Behind each apparent miracle, however, stands the flawless performance of numerous highly complex systems. All are important. The failure of only one portion of a launch vehicle or spacecraft may cause failure of an entire mission. But the first to feel this awesome imperative for perfection are the propulsion systems, especially the engines. Unless they operate flawlessly first, none of the other systems will get a chance to perform in space. Perfection begins in the design of space hardware. This book emphasizes quality and reliability in the design of propulsion and engine systems. It draws deeply from the vast know-how and experience which have been the essence of several well-designed, reliable systems of the past and present. And, with a thoroughness and completeness not previously available, it tells how the present high state of reliability, gained through years of research and testing, can be maintained, and perhaps improved, in engines of the future. As man ventures deeper into space to explore the planets, the search for perfection in the design of propulsion systems will continue.” Some catastrophes with losses of life will be compared to show lapses in quality and safety and contrasted with a catastrophe without loss of life because of compliance with safety requirements. 1. October 24, 1960,(USSR) Nedelin Catastrophe, Death on the Steppes, 124 deaths 2. October 25, 1966,(USA) North American Rockwell, Apollo Block I Service Module Service(SM) Propulsion System fuel tank explosion/fire and destruction of SM and test cell, test engineer/conductor/author, Bill Manha

Study of safety implications for shuttle launched spacecraft using fluorinated oxidizers. Volume 1: Complete text

NASA Technical Reports Server (NTRS)

1975-01-01

The safety implications of space shuttle launched spacecraft using liquid flourine as the oxidizer for spacecraft propulsion were investigated. Feasibility of safe operation was investigated and the equipment and procedures necessary to maximize the chance of success determined. Hazards to the shuttle were found to be similar in kind if not degree to those encountered in use of nitrogen tetroxide (also toxic oxidizer). It was concluded that residual risks from spacecraft using fluorine and nitrogen tetroxide during ground and flight handling may be reduced by isolation of the oxidizer to only its tank. Operation of planetary spacecraft propulsion in the vicinity of the shuttle in earth orbit is not required. The primary hazard to personnel was identified as propellant loading operations, which should be accomplished in an area reasonably remote from personnel and facilities concentrations. Clearing the pad during spacecraft mating with the shuttle orbiter is recommended.

Safety of novel projects, the battle against Murphy's law.

PubMed

Schmidt, R

2001-01-01

With great pleasure and respect I have accepted the offer to speak in this congress. Medicine was a dream for me sometime ago and my second choice for studies. I remained with my first choice engineering and I am still happy with it; but I never forgot my love and enthusiasm for medicine. My career brought me in contact with many countries and technologies, but the development towards safety management became a dominant trend. At CERN I am a Group Leader in Matters of Safety for the Compact Muon Solenoid (CMS) experiment. In the last few years my attention has been increasingly focused on human and institutional safety aspects, besides the technical ones. My paper deals with three major topics: Safety management at CERN-CMS Murphy's law and the growing importance of institutional and human factors in safety Future outlook for safety and conclusions. In the conclusions the commonalities between different technologies become more evident as the importance of the human nature and man's role and enticement to actively and intelligently contribute to safety are presented. Based on experience and references an appeal is launched to pay more attention to the human factor in safety and recognize the rules and regularities of human behaviour in order to better combat Murphy's law.

Proposal of New Triggered Lightning Launch Commit Criteria for Japan's Safety Rocket Launch

NASA Astrophysics Data System (ADS)

Saito, Yasuhiro; Saito, Toshiya; Okita, Koichi

2013-09-01

Triggered lightning for rocket launch can cause the failure.The current Japanese criteria to postpone the launch opportunity is the thickness of cloud 1.8km with 0 -20 degrees Celsius. Of all H2A launches during these ten years, slipping launches have occurred over half of its flights. So, we have initiated a research on Triggered Lightning Launch Commit Criteria, two years ago.We present the overall activities with the observation campaign (RAIJIN*) in Feb/2012 and Jan-Feb/2013, by means of air-born field mill with airplane, X-band dual polarization radar, ground based field mill and Videosonde. Also, the analytical results and proposal of the new criteria will be shown.*) Raijin is originally a name for Thunder god in Japanese and here it stands for Rocket launch Atmospheric electricity Investigation by Jaxa IN cooperation with academia.

Priming patient safety: A middle-range theory of safety goal priming via safety culture communication.

PubMed

Groves, Patricia S; Bunch, Jacinda L

2018-05-18

The aim of this paper is discussion of a new middle-range theory of patient safety goal priming via safety culture communication. Bedside nurses are key to safe care, but there is little theory about how organizations can influence nursing behavior through safety culture to improve patient safety outcomes. We theorize patient safety goal priming via safety culture communication may support organizations in this endeavor. According to this theory, hospital safety culture communication activates a previously held patient safety goal and increases the perceived value of actions nurses can take to achieve that goal. Nurses subsequently prioritize and are motivated to perform tasks and risk assessment related to achieving patient safety. These efforts continue until nurses mitigate or ameliorate identified risks and hazards during the patient care encounter. Critically, this process requires nurses to have a previously held safety goal associated with a repertoire of appropriate actions. This theory suggests undergraduate educators should foster an outcomes focus emphasizing the connections between nursing interventions and safety outcomes, hospitals should strategically structure patient safety primes into communicative activities, and organizations should support professional development including new skills and the latest evidence supporting nursing practice for patient safety. © 2018 John Wiley & Sons Ltd.

Highway Safety Program Manual: Volume 3: Motorcycle Safety.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 3 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on aspects of motorcycle safety. The purpose and specific objectives of a State motorcycle safety program are outlined. Federal authority in the highway safety area and general policies…

2013 NASA Range Safety Annual Report

NASA Technical Reports Server (NTRS)

Dumont, Alan G.

2013-01-01

Welcome to the 2013 edition of the NASA Range Safety Annual Report. Funded by NASA Headquarters, this report provides an Agency overview for current and potential range users. This report contains articles which cover a variety of subject areas, summaries of various activities performed during the past year, links to past reports, and information on several projects that may have a profound impact on the way business will be conducted in the future. Specific topics discussed in the 2013 NASA Range Safety Annual Report include a program overview and 2013 highlights, Range Safety Training, Independent Assessments, support to Program Operations at all ranges conducting NASA launch/flight operations, a continuing overview of emerging range safety-related technologies, and status reports from all of the NASA Centers that have Range Safety responsibilities. Every effort has been made to include the most current information available. We recommend this report be used only for guidance and that the validity and accuracy of all articles be verified for updates. As is the case each year, we had a wide variety of contributors to this report from across our NASA Centers and the national range safety community at large, and I wish to thank them all. On a sad note, we lost one of our close colleagues, Dr. Jim Simpson, due to his sudden passing in December. His work advancing the envelope of autonomous flight safety systems software/hardware development leaves a lasting impression on our community. Such systems are being flight tested today and may one day be considered routine in the range safety business. The NASA family has lost a pioneer in our field, and he will surely be missed. In conclusion, it has been a very busy and productive year, and I look forward to working with all of you in NASA Centers/Programs/Projects and with the national Range Safety community in making Flight/Space activities as safe as they can be in the upcoming year.

Safety Characteristics in System Application Software for Human Rated Exploration

NASA Technical Reports Server (NTRS)

Mango, E. J.

2016-01-01

NASA and its industry and international partners are embarking on a bold and inspiring development effort to design and build an exploration class space system. The space system is made up of the Orion system, the Space Launch System (SLS) and the Ground Systems Development and Operations (GSDO) system. All are highly coupled together and dependent on each other for the combined safety of the space system. A key area of system safety focus needs to be in the ground and flight application software system (GFAS). In the development, certification and operations of GFAS, there are a series of safety characteristics that define the approach to ensure mission success. This paper will explore and examine the safety characteristics of the GFAS development.

VVER Reactor Safety in Eastern Europe and Former Soviet Union

NASA Astrophysics Data System (ADS)

Papadopoulou, Demetra

2012-02-01

VVER Soviet-designed reactors that operate in Eastern Europe and former Soviet republics have heightened international concern for years due to major safety deficiencies. The governments of countries with VVER reactors have invested millions of dollars toward improving the safety of their nuclear power plants. Most of these reactors will continue to operate for the foreseeable future since they provide urgently-needed electrical power. Given this situation, this paper assesses the radiological consequences of a major nuclear accident in Eastern Europe. The paper also chronicles the efforts launched by the international nuclear community to improve the safety of the reactors and notes the progress made so far through extensive collaborative efforts in Armenia, Bulgaria, the Czech Republic, Hungary, Kazakhstan, Lithuania, Russia, Slovakia, and Ukraine to reduce the risks of nuclear accidents. Western scientific and technical staff collaborated with these countries to improve the safety of their reactor operations by strengthening the ability of the regulator to perform its oversight function, installing safety equipment and technologies, investing time in safety training, and working diligently to establish an enduring safety culture. Still, continued safety improvement efforts are necessary to ensure safe operating practices and achieve timely phase-out of older plants.

Does Employee Safety Matter for Patients Too? Employee Safety Climate and Patient Safety Culture in Health Care.

PubMed

Mohr, David C; Eaton, Jennifer Lipkowitz; McPhaul, Kathleen M; Hodgson, Michael J

2015-04-22

We examined relationships between employee safety climate and patient safety culture. Because employee safety may be a precondition for the development of patient safety, we hypothesized that employee safety culture would be strongly and positively related to patient safety culture. An employee safety climate survey was administered in 2010 and assessed employees' views and experiences of safety for employees. The patient safety survey administered in 2011 assessed the safety culture for patients. We performed Pearson correlations and multiple regression analysis to examine the relationships between a composite measure of employee safety with subdimensions of patient safety culture. The regression models controlled for size, geographic characteristics, and teaching affiliation. Analyses were conducted at the group level using data from 132 medical centers. Higher employee safety climate composite scores were positively associated with all 9 patient safety culture measures examined. Standardized multivariate regression coefficients ranged from 0.44 to 0.64. Medical facilities where staff have more positive perceptions of health care workplace safety climate tended to have more positive assessments of patient safety culture. This suggests that patient safety culture and employee safety climate could be mutually reinforcing, such that investments and improvements in one domain positively impacts the other. Further research is needed to better understand the nexus between health care employee and patient safety to generalize and act upon findings.

Guide to active vaccine safety surveillance: Report of CIOMS working group on vaccine safety - executive summary.

PubMed

Heininger, U; Holm, K; Caplanusi, I; Bailey, S R

2017-07-13

In 2013, the Council for International Organizations of Medical Sciences (CIOMS) created a Working Group on Vaccine Safety (WG) to address unmet needs in the area of vaccine pharmacovigilance. Generating reliable data about specific vaccine safety concerns is becoming a priority due to recent progress in the development and deployment of new vaccines of global importance, as well as novel vaccines targeting diseases specifically endemic to many resource-limited countries (RLCs), e.g. malaria, dengue. The WG created a Guide to Active Vaccine Safety Surveillance (AVSS) to assist national regulatory authorities and national immunization program officers in RLCs in determining the best course of action with regards to non-routine pharmacovigilance activities, when confronted with a launch of a new vaccine or a vaccine that is new to their country. Here we summarize the results of the WG, further detailed in the Guide, which for the first time provides a structured approach to identifying and analyzing specific vaccines safety knowledge gaps, while considering all available sources of information, in order to determine whether AVSS is an appropriate solution. If AVSS is confirmed as being the appropriate tool, the Guide provides additional essential information on AVSS, a detailed overview of common types of AVSS and practical implementation considerations. It also provides a framework for a well-constructed and informative AVSS when needed, thus aiming to ensure the best possible safety of immunization in this new landscape. Copyright © 2017 Elsevier Ltd. All rights reserved.

Shuttle Safety Improvements

NASA Technical Reports Server (NTRS)

Henderson, Edward

2001-01-01

The Space Shuttle has been flying for over 20 years and based on the Orbiter design life of 100 missions it should be capable of flying at least 20 years more if we take care of it. The Space Shuttle Development Office established in 1997 has identified those upgrades needed to keep the Shuttle flying safely and efficiently until a new reusable launch vehicle (RLV) is available to meet the agency commitments and goals for human access to space. The upgrade requirements shown in figure 1 are to meet the program goals, support HEDS and next generation space transportation goals while protecting the country 's investment in the Space Shuttle. A major review of the shuttle hardware and processes was conducted in 1999 which identified key shuttle safety improvement priorities, as well as other system upgrades needed to reliably continue to support the shuttle miss ions well into the second decade of this century. The high priority safety upgrades selected for development and study will be addressed in this paper.

Quality, risk management and patient safety: the challenge of effective integration.

PubMed

França, Margarida

2008-01-01

Nowadays we observe the development of three waves of intervention and change within healthcare services: quality management, risk management and patient safety. The Patient Safety movement has been launched at international level as a consequence of the Institute of Medicine's report--To Err is Human, and today patient safety constitutes one basic dimension of health quality subjected to the direct intervention of supranational entities (WHO, EU) and Member States' Governments. The objective of this paper is to raise awareness about the value of quality improvement (QI) methodologies and tools to sustainable healthcare quality outcomes.

Software Safety Risk in Legacy Safety-Critical Computer Systems

NASA Technical Reports Server (NTRS)

Hill, Janice L.; Baggs, Rhoda

2007-01-01

Safety Standards contain technical and process-oriented safety requirements. Technical requirements are those such as "must work" and "must not work" functions in the system. Process-Oriented requirements are software engineering and safety management process requirements. Address the system perspective and some cover just software in the system > NASA-STD-8719.13B Software Safety Standard is the current standard of interest. NASA programs/projects will have their own set of safety requirements derived from the standard. Safety Cases: a) Documented demonstration that a system complies with the specified safety requirements. b) Evidence is gathered on the integrity of the system and put forward as an argued case. [Gardener (ed.)] c) Problems occur when trying to meet safety standards, and thus make retrospective safety cases, in legacy safety-critical computer systems.

Autonomous Flight Safety System September 27, 2005, Aircraft Test

NASA Technical Reports Server (NTRS)

Simpson, James C.

2005-01-01

This report describes the first aircraft test of the Autonomous Flight Safety System (AFSS). The test was conducted on September 27, 2005, near Kennedy Space Center (KSC) using a privately-owned single-engine plane and evaluated the performance of several basic flight safety rules using real-time data onboard a moving aerial vehicle. This test follows the first road test of AFSS conducted in February 2005 at KSC. AFSS is a joint KSC and Wallops Flight Facility (WEF) project that is in its third phase of development. AFSS is an independent subsystem intended for use with Expendable Launch Vehicles that uses tracking data from redundant onboard sensors to autonomously make flight termination decisions using software-based rules implemented on redundant flight processors. The goals of this project are to increase capabilities by allowing launches from locations that do not have or cannot afford extensive ground-based range safety assets, to decrease range costs, and to decrease reaction time for special situations. The mission rules are configured for each operation by the responsible Range Safety authorities and can be loosely categorized in four major categories: Parameter Threshold Violations, Physical Boundary Violations present position and instantaneous impact point (TIP), Gate Rules static and dynamic, and a Green-Time Rule. Examples of each of these rules were evaluated during this aircraft test.

Safety climate and safety behaviors in the construction industry: The importance of co-workers commitment to safety.

PubMed

Schwatka, Natalie V; Rosecrance, John C

2016-06-16

There is growing empirical evidence that as safety climate improves work site safety practice improve. Safety climate is often measured by asking workers about their perceptions of management commitment to safety. However, it is less common to include perceptions of their co-workers commitment to safety. While the involvement of management in safety is essential, working with co-workers who value and prioritize safety may be just as important. To evaluate a concept of safety climate that focuses on top management, supervisors and co-workers commitment to safety, which is relatively new and untested in the United States construction industry. Survey data was collected from a cohort of 300 unionized construction workers in the United States. The significance of direct and indirect (mediation) effects among safety climate and safety behavior factors were evaluated via structural equation modeling. Results indicated that safety climate was associated with safety behaviors on the job. More specifically, perceptions of co-workers commitment to safety was a mediator between both management commitment to safety climate factors and safety behaviors. These results support workplace health and safety interventions that build and sustain safety climate and a commitment to safety amongst work teams.

78 FR 15293 - Safety Zone; St. Patrick's Day Fireworks; Manitowoc River, Manitowoc, WI

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-11

...-AA00 Safety Zone; St. Patrick's Day Fireworks; Manitowoc River, Manitowoc, WI AGENCY: Coast Guard, DHS... will hold its annual St. Patrick's Day fireworks display. This fireworks display will be launched from... as follows: Sec. 165.T09-0116 Safety Zone; St. Patrick's Day Fireworks; Manitowoc River, Manitowoc...

Comparing two safety culture surveys: safety attitudes questionnaire and hospital survey on patient safety.

PubMed

Etchegaray, Jason M; Thomas, Eric J

2012-06-01

To examine the reliability and predictive validity of two patient safety culture surveys-Safety Attitudes Questionnaire (SAQ) and Hospital Survey on Patient Safety Culture (HSOPS)-when administered to the same participants. Also to determine the ability to convert HSOPS scores to SAQ scores. Employees working in intensive care units in 12 hospitals within a large hospital system in the southern United States were invited to anonymously complete both safety culture surveys electronically. All safety culture dimensions from both surveys (with the exception of HSOPS's Staffing) had adequate levels of reliability. Three of HSOPS's outcomes-frequency of event reporting, overall perceptions of patient safety, and overall patient safety grade-were significantly correlated with SAQ and HSOPS dimensions of culture at the individual level, with correlations ranging from r=0.41 to 0.65 for the SAQ dimensions and from r=0.22 to 0.72 for the HSOPS dimensions. Neither the SAQ dimensions nor the HSOPS dimensions predicted the fourth HSOPS outcome-number of events reported within the last 12 months. Regression analyses indicated that HSOPS safety culture dimensions were the best predictors of frequency of event reporting and overall perceptions of patient safety while SAQ and HSOPS dimensions both predicted patient safety grade. Unit-level analyses were not conducted because indices did not indicate that aggregation was appropriate. Scores were converted between the surveys, although much variance remained unexplained. Given that the SAQ and HSOPS had similar reliability and predictive validity, investigators and quality and safety leaders should consider survey length, content, sensitivity to change and the ability to benchmark when selecting a patient safety culture survey.

Eye Protection: Safety Glasses. Safety Spotlight

ERIC Educational Resources Information Center

Deck, Anita; Roy, Ken

2017-01-01

When it comes to eye safety, there are some situations in which regular safety glasses will work adequately for the needs of the STEM education classroom or laboratory. However, there are certain instances in which safety goggles must be used for safer protection. Taking the time to analyze hazards and assess the risks prior to any activity in the…

The Effects of Safety Discrimination Training and Frequent Safety Observations on Safety-Related Behavior

ERIC Educational Resources Information Center

Taylor, Matthew A.; Alvero, Alicia M.

2012-01-01

The intent of the present study was to assess the effects of discrimination training only and in combination with frequent safety observations on five participants' safety-related behavior in a simulated office setting. The study used a multiple-baseline design across safety-related behaviors. Across all participants and behavior, safety improved…

Traceability of Software Safety Requirements in Legacy Safety Critical Systems

NASA Technical Reports Server (NTRS)

Hill, Janice L.

2007-01-01

How can traceability of software safety requirements be created for legacy safety critical systems? Requirements in safety standards are imposed most times during contract negotiations. On the other hand, there are instances where safety standards are levied on legacy safety critical systems, some of which may be considered for reuse for new applications. Safety standards often specify that software development documentation include process-oriented and technical safety requirements, and also require that system and software safety analyses are performed supporting technical safety requirements implementation. So what can be done if the requisite documents for establishing and maintaining safety requirements traceability are not available?

HSE's safety assessment principles for criticality safety.

PubMed

Simister, D N; Finnerty, M D; Warburton, S J; Thomas, E A; Macphail, M R

2008-06-01

The Health and Safety Executive (HSE) published its revised Safety Assessment Principles for Nuclear Facilities (SAPs) in December 2006. The SAPs are primarily intended for use by HSE's inspectors when judging the adequacy of safety cases for nuclear facilities. The revised SAPs relate to all aspects of safety in nuclear facilities including the technical discipline of criticality safety. The purpose of this paper is to set out for the benefit of a wider audience some of the thinking behind the final published words and to provide an insight into the development of UK regulatory guidance. The paper notes that it is HSE's intention that the Safety Assessment Principles should be viewed as a reflection of good practice in the context of interpreting primary legislation such as the requirements under site licence conditions for arrangements for producing an adequate safety case and for producing a suitable and sufficient risk assessment under the Ionising Radiations Regulations 1999 (SI1999/3232 www.opsi.gov.uk/si/si1999/uksi_19993232_en.pdf).

Software Safety Risk in Legacy Safety-Critical Computer Systems

NASA Technical Reports Server (NTRS)

Hill, Janice; Baggs, Rhoda

2007-01-01

Safety-critical computer systems must be engineered to meet system and software safety requirements. For legacy safety-critical computer systems, software safety requirements may not have been formally specified during development. When process-oriented software safety requirements are levied on a legacy system after the fact, where software development artifacts don't exist or are incomplete, the question becomes 'how can this be done?' The risks associated with only meeting certain software safety requirements in a legacy safety-critical computer system must be addressed should such systems be selected as candidates for reuse. This paper proposes a method for ascertaining formally, a software safety risk assessment, that provides measurements for software safety for legacy systems which may or may not have a suite of software engineering documentation that is now normally required. It relies upon the NASA Software Safety Standard, risk assessment methods based upon the Taxonomy-Based Questionnaire, and the application of reverse engineering CASE tools to produce original design documents for legacy systems.

78 FR 20454 - Safety Zones; Annual Events Requiring Safety Zones in the Captain of the Port Lake Michigan Zone

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-05

... written--Celebrate Americafest/Fire over the Fox. This event has historically involved both a fireworks... day of the event. To ensure the safety of the Celebrate Americafest/Fire over the Fox event in its... 7 p.m. (2) Michigan Aerospace Challenge Sport Rocket Launch; Muskegon, MI--(i) Location. All waters...

75 FR 18056 - Safety Zone; Fireworks Display, Patuxent River, Solomons Island Harbor, MD

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-09

..., DHS. ACTION: Temporary final rule. SUMMARY: The Coast Guard is establishing a temporary safety zone... necessary to provide for the safety of life on navigable waters during a fireworks display launched from... protect the maritime public in a portion of Solomons Island Harbor. DATES: This rule is effective from 7...

2008 NASA Range Safety Annual Report

NASA Technical Reports Server (NTRS)

Lamoreaux, Richard W.

2008-01-01

Welcome to the 2008 edition of the NASA Range Safety Annual Report. Funded by NASA Headquarters, this report provides a NASA Range Safety overview for current and potential range users. This year, along with full length articles concerning various subject areas, we have provided updates to standard subjects with links back to the 2007 original article. Additionally, we present summaries from the various NASA Range Safety Program activities that took place throughout the year, as well as information on several special projects that may have a profound impact on the way we will do business in the future. The sections include a program overview and 2008 highlights of Range Safety Training; Range Safety Policy; Independent Assessments and Common Risk Analysis Tools Development; Support to Program Operations at all ranges conducting NASA launch operations; a continuing overview of emerging Range Safety-related technologies; Special Interests Items that include recent changes in the ELV Payload Safety Program and the VAS explosive siting study; and status reports from all of the NASA Centers that have Range Safety responsibilities. As is the case each year, contributors to this report are too numerous to mention, but we thank individuals from the NASA Centers, the Department of Defense, and civilian organizations for their contributions. We have made a great effort to include the most current information available. We recommend that this report be used only for guidance and that the validity and accuracy of all articles be verified for updates. This is the third year we have utilized this web-based format for the annual report. We continually receive positive feedback on the web-based edition, and we hope you enjoy this year's product as well. It has been a very busy and productive year on many fronts as you will note as you review this report. Thank you to everyone who contributed to make this year a successful one, and I look forward to working with all of you in the

A Common Approach for the Certifying of International Space Station (ISS) Basic Hardware for Ground Safety

NASA Technical Reports Server (NTRS)

Kirkpatrick, Paul D.; Trinchero, Jean-Pierre

2005-01-01

In order to support the International Space Station, as well as any future long term human missions, vast amounts of logistical-type hardware is required to be processed through the various launch sites. This category consists of such hardware as spare parts, replacement items, and upgraded hardware. The category also includes samples for experiments and consumables. One attribute that all these items have is they are generally non-hazardous, at least to ground personnel. Even though the items are non-hazardous, launch site ground safety has a responsibility for the protection of personnel, the flight hardware, and launch site resources. In order to fulfill this responsibility, the safety organization must have knowledge of the hardware and its operations. Conversely, the hardware providers are entitled to a process that is commensurate with the hazard. Additionally, a common system should be in place that is flexible enough to account for the requirements at all launch sites, so that, the hardware provider need only complete one process for ground safety regardless of the launch site.

Safety Control and Safety Education at Technical Institutes

NASA Astrophysics Data System (ADS)

Iino, Hiroshi

The importance of safety education for students at technical institutes is emphasized on three grounds including safety of all working members and students in their education, research and other activities. The Kanazawa Institute of Technology re-organized the safety organization into a line structure and improved safety minds of all their members and now has a chemical materials control system and a set of compulsory safety education programs for their students, although many problems still remain.

Patient safety in phlebology: The ACP Phlebology Safety Checklist.

PubMed

Collares, Felipe Birchal; Sonde, Mehru; Harper, Kenneth; Armitage, Michael; Neuhardt, Diana L; Fronek, Helane S

2018-05-01

Objectives To assess the current use of safety checklists among the American College of Phlebology (ACP) members and their interest in implementing a checklist supported by the ACP on their clinical practices; and to develop a phlebology safety checklist. Method Online surveys were sent to ACP members, and a phlebology safety checklist was developed by a multispecialty team through the ACP Leadership Academy. Results Forty-seven percent of respondents are using a safety checklist in their practices; 23% think that a phlebology safety checklist would interfere or disrupt workflow; 79% answered that a phlebology safety checklist could improve procedure outcomes or prevent complications; and 85% would be interested in implementing a phlebology safety checklist approved by the ACP. Conclusion A phlebology safety checklist was developed with the intent to increase awareness on patient safety and improve outcome in phlebology practice.

14 CFR 417.213 - Flight safety limits analysis.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Flight safety limits analysis. 417.213 Section 417.213 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION... launch vehicle's flight to prevent the hazardous effects of the resulting debris impacts from reaching...

14 CFR 417.213 - Flight safety limits analysis.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 4 2014-01-01 2014-01-01 false Flight safety limits analysis. 417.213 Section 417.213 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION... launch vehicle's flight to prevent the hazardous effects of the resulting debris impacts from reaching...

14 CFR 417.213 - Flight safety limits analysis.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Flight safety limits analysis. 417.213 Section 417.213 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION... launch vehicle's flight to prevent the hazardous effects of the resulting debris impacts from reaching...

14 CFR 417.213 - Flight safety limits analysis.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 4 2013-01-01 2013-01-01 false Flight safety limits analysis. 417.213 Section 417.213 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION... launch vehicle's flight to prevent the hazardous effects of the resulting debris impacts from reaching...

14 CFR 417.213 - Flight safety limits analysis.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 4 2012-01-01 2012-01-01 false Flight safety limits analysis. 417.213 Section 417.213 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION... launch vehicle's flight to prevent the hazardous effects of the resulting debris impacts from reaching...

78 FR 53790 - Public Forum-Safety Culture: Enhancing Transportation Safety

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-30

... NATIONAL TRANSPORTATION SAFETY BOARD Public Forum--Safety Culture: Enhancing Transportation Safety On Tuesday and Wednesday, September 10-11, 2013, the National Transportation Safety Board (NTSB) will convene a forum titled, ``Safety Culture: Enhancing Transportation Safety.'' The forum will begin at 9:00...

78 FR 76751 - Safety Zone; Vessel Launch; Menominee River; Marinette, WI

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-19

... Agriculture Regulatory Enforcement Ombudsman and the Regional Small Business Regulatory Fairness Boards. The... consensus standards. 14. Environment We have analyzed this rule under Department of Homeland Security... significant effect on the human environment. This rule involves the establishment of a safety zone and...

SafetyAnalyst

DOT National Transportation Integrated Search

2009-01-01

This booklet provides an overview of SafetyAnalyst. SafetyAnalyst is a set of software tools under development to help State and local highway agencies advance their programming of site-specific safety improvements. SafetyAnalyst will incorporate sta...

The association between EMS workplace safety culture and safety outcomes.

PubMed

Weaver, Matthew D; Wang, Henry E; Fairbanks, Rollin J; Patterson, Daniel

2012-01-01

Prior studies have highlighted wide variation in emergency medical services (EMS) workplace safety culture across agencies. To determine the association between EMS workplace safety culture scores and patient or provider safety outcomes. We administered a cross-sectional survey to EMS workers affiliated with a convenience sample of agencies. We recruited these agencies from a national EMS management organization. We used the EMS Safety Attitudes Questionnaire (EMS-SAQ) to measure workplace safety culture and the EMS Safety Inventory (EMS-SI), a tool developed to capture self-reported safety outcomes from EMS workers. The EMS-SAQ provides reliable and valid measures of six domains: safety climate, teamwork climate, perceptions of management, working conditions, stress recognition, and job satisfaction. A panel of medical directors, emergency medical technicians and paramedics, and occupational epidemiologists developed the EMS-SI to measure self-reported injury, medical errors and adverse events, and safety-compromising behaviors. We used hierarchical linear models to evaluate the association between EMS-SAQ scores and EMS-SI safety outcome measures. Sixteen percent of all respondents reported experiencing an injury in the past three months, four of every 10 respondents reported an error or adverse event (AE), and 89% reported safety-compromising behaviors. Respondents reporting injury scored lower on five of the six domains of safety culture. Respondents reporting an error or AE scored lower for four of the six domains, while respondents reporting safety-compromising behavior had lower safety culture scores for five of the six domains. Individual EMS worker perceptions of workplace safety culture are associated with composite measures of patient and provider safety outcomes. This study is preliminary evidence of the association between safety culture and patient or provider safety outcomes.

Transformational and passive leadership as cross-level moderators of the relationships between safety knowledge, safety motivation, and safety participation.

PubMed

Jiang, Lixin; Probst, Tahira M

2016-06-01

While safety knowledge and safety motivation are well-established predictors of safety participation, less is known about the impact of leadership styles on these relationships. The purpose of the current study was to examine whether the positive relationships between safety knowledge and motivation and safety participation are contingent on transformational and passive forms of safety leadership. Using multilevel modeling with a sample of 171 employees nested in 40 workgroups, we found that transformational safety leadership strengthened the safety knowledge-participation relationship, whereas passive leadership weakened the safety motivation-participation relationship. Under low transformational leadership, safety motivation was not related to safety participation; under high passive leadership, safety knowledge was not related to safety participation. These results are discussed in light of organizational efforts to increase safety-related citizenship behaviors. Copyright © 2016 Elsevier Ltd and National Safety Council. All rights reserved.

Perceived organizational support for safety and employee safety voice: the mediating role of coworker support for safety.

PubMed

Tucker, Sean; Chmiel, Nik; Turner, Nick; Hershcovis, M Sandy; Stride, Chris B

2008-10-01

In the present study, we modeled 2 sources of safety support (perceived organizational support for safety and perceived coworker support for safety) as predictors of employee safety voice, that is, speaking out in an attempt to change unsafe working conditions. Drawing on social exchange and social impact theories, we hypothesized and tested a mediated model predicting employee safety voice using a cross-sectional survey of urban bus drivers (n = 213) in the United Kingdom. Hierarchical regression analysis showed that perceived coworker support for safety fully mediated the relationship between perceived organizational support for safety and employee safety voice. This study adds to the employee voice literature by evaluating the important role that coworkers can play in encouraging others to speak out about safety issues. Implications for research and practice related to change-oriented safety communication are discussed.

Relationships among Safety Climate, Safety Behavior, and Safety Outcomes for Ethnic Minority Construction Workers

PubMed Central

Lyu, Sainan; Chan, Albert P. C.; Wong, Francis K. W.

2018-01-01

In many countries, it is common practice to attract and employ ethnic minority (EM) or migrant workers in the construction industry. This primarily occurs in order to alleviate the labor shortage caused by an aging workforce with a lack of new entrants. Statistics show that EM construction workers are more likely to have occupational fatal and nonfatal injuries than their local counterparts; however, the mechanism underlying accidents and injuries in this vulnerable population has been rarely examined. This study aims to investigate relationships among safety climate, safety behavior, and safety outcomes for EM construction workers. To this end, a theoretical research model was developed based on a comprehensive review of the current literature. In total, 289 valid questionnaires were collected face-to-face from 223 Nepalese construction workers and 56 Pakistani construction workers working on 15 construction sites in Hong Kong. Structural equation modelling was employed to validate the constructs and test the hypothesized model. Results show that there were significant positive relationships between safety climate and safety behaviors, and significant negative relationships between safety behaviors and safety outcomes for EM construction workers. This research contributes to the literature regarding EM workers by providing empirical evidence of the mechanisms by which safety climate affects safety behaviors and outcomes. It also provides insights in order to help the key stakeholders formulate safety strategies for EM workers in many areas where numerous EM workers are employed, such as in the U.S., the UK, Australia, Singapore, Malaysia, and the Middle East. PMID:29522503

Relationships among Safety Climate, Safety Behavior, and Safety Outcomes for Ethnic Minority Construction Workers.

PubMed

Lyu, Sainan; Hon, Carol K H; Chan, Albert P C; Wong, Francis K W; Javed, Arshad Ali

2018-03-09

In many countries, it is common practice to attract and employ ethnic minority (EM) or migrant workers in the construction industry. This primarily occurs in order to alleviate the labor shortage caused by an aging workforce with a lack of new entrants. Statistics show that EM construction workers are more likely to have occupational fatal and nonfatal injuries than their local counterparts; however, the mechanism underlying accidents and injuries in this vulnerable population has been rarely examined. This study aims to investigate relationships among safety climate, safety behavior, and safety outcomes for EM construction workers. To this end, a theoretical research model was developed based on a comprehensive review of the current literature. In total, 289 valid questionnaires were collected face-to-face from 223 Nepalese construction workers and 56 Pakistani construction workers working on 15 construction sites in Hong Kong. Structural equation modelling was employed to validate the constructs and test the hypothesized model. Results show that there were significant positive relationships between safety climate and safety behaviors, and significant negative relationships between safety behaviors and safety outcomes for EM construction workers. This research contributes to the literature regarding EM workers by providing empirical evidence of the mechanisms by which safety climate affects safety behaviors and outcomes. It also provides insights in order to help the key stakeholders formulate safety strategies for EM workers in many areas where numerous EM workers are employed, such as in the U.S., the UK, Australia, Singapore, Malaysia, and the Middle East.

The association between EMS workplace safety culture and safety outcomes

PubMed Central

Weaver, Matthew D.; Wang, Henry E.; Fairbanks, Rollin J.; Patterson, Daniel

2012-01-01

Objective Prior studies have highlighted wide variation in EMS workplace safety culture across agencies. We sought to determine the association between EMS workplace safety culture scores and patient or provider safety outcomes. Methods We administered a cross-sectional survey to EMS workers affiliated with a convenience sample of agencies. We recruited these agencies from a national EMS management organization. We used the EMS Safety Attitudes Questionnaire (EMS-SAQ) to measure workplace safety culture and the EMS Safety Inventory (EMS-SI), a tool developed to capture self-reported safety outcomes from EMS workers. The EMS-SAQ provides reliable and valid measures of six domains: safety climate, teamwork climate, perceptions of management, perceptions of working conditions, stress recognition, and job satisfaction. A panel of medical directors, paramedics, and occupational epidemiologists developed the EMS-SI to measure self-reported injury, medical errors and adverse events, and safety-compromising behaviors. We used hierarchical linear models to evaluate the association between EMS-SAQ scores and EMS-SI safety outcome measures. Results Sixteen percent of all respondents reported experiencing an injury in the past 3 months, four of every 10 respondents reported an error or adverse event (AE), and 90% reported safety-compromising behaviors. Respondents reporting injury scored lower on 5 of the 6 domains of safety culture. Respondents reporting an error or AE scored lower for 4 of the 6 domains, while respondents reporting safety-compromising behavior had lower safety culture scores for 5 of 6 domains. Conclusions Individual EMS worker perceptions of workplace safety culture are associated with composite measures of patient and provider safety outcomes. This study is preliminary evidence of the association between safety culture and patient or provider safety outcomes. PMID:21950463

The moderating role of safety-specific trust on the relation between safety-specific leadership and safety citizenship behaviors.

PubMed

Conchie, Stacey M; Donald, Ian J

2009-04-01

The authors examined whether safety-specific trust moderates or mediates the relationship between safety-specific transformational leadership and subordinates' safety citizenship behavior. Data from 139 subordinate-supervisor dyads were collected from the United Kingdom construction industry and analyzed using hierarchical regression models. Results showed that safety-specific trust moderated rather than mediated the effects of safety-specific transformational leaders on subordinates' behavior. Specifically, in conditions of high and moderate safety-specific trust, leaders had a significant effect on subordinates' safety citizenship behavior. However, in conditions of low safety-specific trust, leaders did not significantly influence subordinates' safety citizenship behavior. The implications of these findings for general safety theory and practice are discussed.

Safety culture : a significant influence on safety in transportation

DOT National Transportation Integrated Search

2017-08-01

An organizations safety culture can influence safety outcomes. Research and experience show that when safety culture is strong, accidents are less frequent and less severe. As a result, building and maintaining strong safety cultures should be a t...

Modeling patient safety incidents knowledge with the Categorial Structure method.

PubMed

Souvignet, Julien; Bousquet, Cédric; Lewalle, Pierre; Trombert-Paviot, Béatrice; Rodrigues, Jean Marie

2011-01-01

Following the WHO initiative named World Alliance for Patient Safety (PS) launched in 2004 a conceptual framework developed by PS national reporting experts has summarized the knowledge available. As a second step, the Department of Public Health of the University of Saint Etienne team elaborated a Categorial Structure (a semi formal structure not related to an upper level ontology) identifying the elements of the semantic structure underpinning the broad concepts contained in the framework for patient safety. This knowledge engineering method has been developed to enable modeling patient safety information as a prerequisite for subsequent full ontology development. The present article describes the semantic dissection of the concepts, the elicitation of the ontology requirements and the domain constraints of the conceptual framework. This ontology includes 134 concepts and 25 distinct relations and will serve as basis for an Information Model for Patient Safety.

National Safety Council

MedlinePlus

... Safety Management Systems Workplace Safety Consulting Employee Perception Surveys Research Journey to Safety Excellence Join the Journey What ... Safety Management Systems Workplace Safety Consulting Employee Perception Surveys Research Journey to Safety Excellence Join the Journey What ...

Offshore safety case approach and formal safety assessment of ships.

PubMed

Wang, J

2002-01-01

Tragic marine and offshore accidents have caused serious consequences including loss of lives, loss of property, and damage of the environment. A proactive, risk-based "goal setting" regime is introduced to the marine and offshore industries to increase the level of safety. To maximize marine and offshore safety, risks need to be modeled and safety-based decisions need to be made in a logical and confident way. Risk modeling and decision-making tools need to be developed and applied in a practical environment. This paper describes both the offshore safety case approach and formal safety assessment of ships in detail with particular reference to the design aspects. The current practices and the latest development in safety assessment in both the marine and offshore industries are described. The relationship between the offshore safety case approach and formal ship safety assessment is described and discussed. Three examples are used to demonstrate both the offshore safety case approach and formal ship safety assessment. The study of risk criteria in marine and offshore safety assessment is carried out. The recommendations on further work required are given. This paper gives safety engineers in the marine and offshore industries an overview of the offshore safety case approach and formal ship safety assessment. The significance of moving toward a risk-based "goal setting" regime is given.

An Innovative Hybrid Loop-Pool SFR Design and Safety Analysis Methods: Today and Tomorrow

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hongbin Zhang; Haihua Zhao; Vincent Mousseau

2008-04-01

Investment in commercial sodium cooled fast reactor (SFR) power plants will become possible only if SFRs achieve economic competitiveness as compared to light water reactors and other Generation IV reactors. Toward that end, we have launched efforts to improve the economics and safety of SFRs from the thermal design and safety analyses perspectives at Idaho National Laboratory. From the thermal design perspective, an innovative hybrid loop-pool SFR design has been proposed. This design takes advantage of the inherent safety of a pool design and the compactness of a loop design to further improve economics and safety. From the safety analysesmore » perspective, we have initiated an effort to develop a high fidelity reactor system safety code.« less

Value of Responsive Launch Safety Toolsets

NASA Astrophysics Data System (ADS)

Devoid, Wayne E.

2013-09-01

This paper will discuss the advantages and disadvantages of all-in-one risk assessment toolsets as they are applied to a wide variety of orbital, suborbital, lander, and unmanned vehicles. Toolsets like APT's SafeLab and Horizon, that are designed from the ground up specifically to address ever- changing vehicle and mission parameters, reduce the need for additional software development costs for launch ranges and vehicle manufacturers.

Safety survey report EBR-II safety survey, ANL-west health protection, industrial safety and fire protection survey

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dunbar, K.A.

1972-01-10

A safety survey covering the disciplines of Reactor Safety, Nuclear Criticality Safety, Health Protection and Industrial Safety and Fire Protection was conducted at the ANL-West EBR-II FEF Complex during the period January 10-18, 1972. In addition, the entire ANL-West site was surveyed for Health Protection and Industrial Safety and Fire Protection. The survey was conducted by members of the AEC Chicago Operations Office, a member of RDT-HQ and a member of the RDT-ID site office. Eighteen recommendations resulted from the survey, eleven in the area of Industrial Safety and Fire Protection, five in the area of Reactor Safety and twomore » in the area of Nuclear Criticality Safety.« less

Effect of STOP technique on safety climate in a construction company.

PubMed

Darvishi, Ebrahim; Maleki, Afshin; Dehestaniathar, Saeed; Ebrahemzadih, Mehrzad

2015-01-01

Safety programs are a core part of safety management in workplaces that can reduce incidents and injuries. The aim of this study was to investigate the influence of Safety Training Observation Program (STOP) technique as a behavior modification program on safety climate in a construction company. This cross-sectional study was carried out on workers of the Petrochemical Construction Company, western Iran. In order to improve safety climate, an unsafe behavior modification program entitled STOP was launched among workers of project during 12 months from April 2013 and April 2014. The STOP technique effectiveness in creating a positive safety climate was evaluated using the Safety Climate Assessment Toolkit. 76.78% of total behaviors were unsafe. 54.76% of total unsafe acts/ at-risk behaviors were related to the fall hazard. The most cause of unsafe behaviors was associated with habit and unavailability of safety equipment. After 12 month of continuous implementation the STOP technique, 55.8% of unsafe behaviors reduced among workers. The average score of safety climate evaluated using of the Toolkit, before and after the implementation of the STOP technique was 5.77 and 7.24, respectively. The STOP technique can be considered as effective approach for eliminating at-risk behavior, reinforcing safe work practices, and creating a positive safety climate in order to reduction incidents/injuries.

Performance and safety testing of lithium batteries for the Expendable, Mobile, ASW Training Target (EMATT)

NASA Astrophysics Data System (ADS)

Hallal, P. B.; Bis, R. F.

1986-08-01

The developmental EMATT (expendable, mobile, ASW training target) may use a high-energy (lithium/sulfuryl chloride) battery system. Safety problems with the original battery cell design were experienced during early performance and safety testing. After redesign of the battery cell, performance and safety tests were made under specified abuse conditions, as well as under simulated launch conditions. The test results showed that the power system now meets all safety requirements, and that the EMATT vehicle is safe to deploy for its engineering development phase.

78 FR 38830 - Safety Zone; Execpro Services Fireworks Display, Lake Tahoe, Incline Village, NV

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-28

... spectators from the dangers associated with the pyrotechnics. Unauthorized persons or vessels are prohibited... pyrotechnics used in this fireworks display, the safety zone is necessary to provide for the safety of event... loading, transit and arrival of the pyrotechnics from the loading site to the launch site and until the...

Total safety management: An approach to improving safety culture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blush, S.M.

A little over 4 yr ago, Admiral James D. Watkins became Secretary of Energy. President Bush, who had appointed him, informed Watkins that his principal task would be to clean up the nuclear weapons complex and put the US Department of Energy (DOE) back in the business of producing tritium for the nation's nuclear deterrent. Watkins recognized that in order to achieve these objectives, he would have to substantially improve the DOE's safety culture. Safety culture is a relatively new term. The International Atomic Energy Agency (IAEA) used it in a 1986 report on the root causes of the Chernobylmore » nuclear accident. In 1990, the IAEA's International Nuclear Safety Advisory Group issued a document focusing directly on safety culture. It provides guidelines to the international nuclear community for measuring the effectiveness of safety culture in nuclear organizations. Safety culture has two principal aspects: an organizational framework conducive to safety and the necessary organizational and individual attitudes that promote safety. These obviously go hand in hand. An organization must create the right framework to foster the right attitudes, but individuals must have the right attitudes to create the organizational framework that will support a good safety culture. The difficulty in developing such a synergistic relationship suggests that achieving and sustaining a strong safety culture is not easy, particularly in an organization whose safety culture is in serious disrepair.« less

Civility norms, safety climate, and safety outcomes: a preliminary investigation.

PubMed

McGonagle, Alyssa K; Walsh, Benjamin M; Kath, Lisa M; Morrow, Stephanie L

2014-10-01

Working environments that are both civil and safe are good for business and employee well-being. Civility has been empirically linked to such important outcomes as organizational performance and individuals' positive work-related attitudes, yet research relating civility to safety is lacking. In this study, we link perceptions of civility norms to perceptions of safety climate and safety outcomes. Drawing on social exchange theory, we proposed and tested a model in 2 samples wherein civility norms indirectly relate to safety outcomes through associations with various safety climate facets. Our results supported direct relationships between civility and management safety climate and coworker safety climate. Additionally, indirect effects of civility norms on unsafe behaviors and injuries were observed. Indirect effects of civility norms on unsafe behaviors were observed through coworker safety climate and work-safety tension. Indirect effects of civility norms on injuries were observed through management safety climate and work-safety tension for full-time employees, although these effects did not hold for part-time employees. This study provides initial evidence that researchers and practitioners may want to look beyond safety climate to civility norms to more comprehensively understand the origins of unsafe behaviors and injuries and to develop appropriate preventive interventions. (PsycINFO Database Record (c) 2014 APA, all rights reserved).

14 CFR 417.25 - Post launch report.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 4 2012-01-01 2012-01-01 false Post launch report. 417.25 Section 417.25... TRANSPORTATION LICENSING LAUNCH SAFETY General and License Terms and Conditions § 417.25 Post launch report. (a) For a launch operator launching from a Federal launch range, a launch operator must file a post launch...

14 CFR 417.25 - Post launch report.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 4 2014-01-01 2014-01-01 false Post launch report. 417.25 Section 417.25... TRANSPORTATION LICENSING LAUNCH SAFETY General and License Terms and Conditions § 417.25 Post launch report. (a) For a launch operator launching from a Federal launch range, a launch operator must file a post launch...

14 CFR 417.25 - Post launch report.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Post launch report. 417.25 Section 417.25... TRANSPORTATION LICENSING LAUNCH SAFETY General and License Terms and Conditions § 417.25 Post launch report. (a) For a launch operator launching from a Federal launch range, a launch operator must file a post launch...

14 CFR 417.25 - Post launch report.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Post launch report. 417.25 Section 417.25... TRANSPORTATION LICENSING LAUNCH SAFETY General and License Terms and Conditions § 417.25 Post launch report. (a) For a launch operator launching from a Federal launch range, a launch operator must file a post launch...

14 CFR 417.25 - Post launch report.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 4 2013-01-01 2013-01-01 false Post launch report. 417.25 Section 417.25... TRANSPORTATION LICENSING LAUNCH SAFETY General and License Terms and Conditions § 417.25 Post launch report. (a) For a launch operator launching from a Federal launch range, a launch operator must file a post launch...

76 FR 43825 - Launch Safety: Lightning Criteria for Expendable Launch Vehicles

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-22

... Vehicles AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Direct final rule; Confirmation of... launch vehicle through or near an electrified environment in or near a cloud. These changes also increase...

Hospital safety climate and safety behavior: A social exchange perspective.

PubMed

Ancarani, Alessandro; Di Mauro, Carmela; Giammanco, Maria D

Safety climate is considered beneficial to the improvement of hospital safety outcomes. Nevertheless, the relations between two of its key constituents, namely those stemming from leader-subordinate relations and coworker support for safety, are still to be fully ascertained. This article uses the theoretical lens of Social Exchange Theory to study the joint impact of leader-member exchange in the safety sphere and coworker support for safety on safety-related behavior at the hospital ward level. Social exchange constructs are further related to the existence of a shame-/blame-free environment, seen as a potential antecedent of safety behavior. A cross-sectional study including 166 inpatients in hospital wards belonging to 10 public hospitals in Italy was undertaken to test the hypotheses developed. Hypothesized relations have been analyzed through a fully mediated multilevel structural equation model. This methodology allows studying behavior at the individual level, while keeping into account the heterogeneity among hospital specialties. Results suggest that the linkage between leader support for safety and individual safety behavior is mediated by coworker support on safety issues and by the creation of a shame-free environment. These findings call for the creation of a safety climate in which managerial efforts should be directed not only to the provision of new safety resources and the enforcement of safety rules but also to the encouragement of teamwork and freedom to report errors as ways to foster the capacity of the staff to communicate, share, and learn from each other.

Safety climate and mindful safety practices in the oil and gas industry.

PubMed

Dahl, Øyvind; Kongsvik, Trond

2018-02-01

The existence of a positive association between safety climate and the safety behavior of sharp-end workers in high-risk organizations is supported by a considerable body of research. Previous research has primarily analyzed two components of safety behavior, namely safety compliance and safety participation. The present study extends previous research by looking into the relationship between safety climate and another component of safety behavior, namely mindful safety practices. Mindful safety practices are defined as the ability to be aware of critical factors in the environment and to act appropriately when dangers arise. Regression analysis was used to examine whether mindful safety practices are, like compliance and participation, promoted by a positive safety climate, in a questionnaire-based study of 5712 sharp-end workers in the oil and gas industry. The analysis revealed that a positive safety climate promotes mindful safety practices. The regression model accounted for roughly 31% of the variance in mindful safety practices. The most important safety climate factor was safety leadership. The findings clearly demonstrate that mindful safety practices are highly context-dependent, hence, manageable and susceptible to change. In order to improve safety climate in a direction which is favorable for mindful safety practices, the results demonstrate that it is important to give the fundamental features of safety climate high priority and in particular that of safety leadership. Copyright © 2017 National Safety Council and Elsevier Ltd. All rights reserved.

Correlation between safety climate and contractor safety assessment programs in construction

PubMed Central

Sparer, EH1; Murphy, LA; Taylor, KM; Dennerlein, Jt

2015-01-01

Background Contractor safety assessment programs (CSAPs) measure safety performance by integrating multiple data sources together; however, the relationship between these measures of safety performance and safety climate within the construction industry is unknown. Methods 401 construction workers employed by 68 companies on 26 sites and 11 safety managers employed by 11 companies completed brief surveys containing a nine-item safety climate scale developed for the construction industry. CSAP scores from ConstructSecure, Inc., an online CSAP database, classified these 68 companies as high or low scorers, with the median score of the sample population as the threshold. Spearman rank correlations evaluated the association between the CSAP score and the safety climate score at the individual level, as well as with various grouping methodologies. In addition, Spearman correlations evaluated the comparison between manager-assessed safety climate and worker-assessed safety climate. Results There were no statistically significant differences between safety climate scores reported by workers in the high and low CSAP groups. There were, at best, weak correlations between workers’ safety climate scores and the company CSAP scores, with marginal statistical significance with two groupings of the data. There were also no significant differences between the manager-assessed safety climate and the worker-assessed safety climate scores. Conclusions A CSAP safety performance score does not appear to capture safety climate, as measured in this study. The nature of safety climate in construction is complex, which may be reflective of the challenges in measuring safety climate within this industry. PMID:24038403

Patient safety climate and worker safety behaviours in acute hospitals in Scotland.

PubMed

Agnew, Cakil; Flin, Rhona; Mearns, Kathryn

2013-06-01

To obtain a measure of hospital safety climate from a sample of National Health Service (NHS) acute hospitals in Scotland and to test whether these scores were associated with worker safety behaviors, and patient and worker injuries. Data were from 1,866 NHS clinical staff in six Scottish acute hospitals. A Scottish Hospital Safety Questionnaire measured hospital safety climate (Hospital Survey on Patient Safety Culture), worker safety behaviors, and worker and patient injuries. The associations between the hospital safety climate scores and the outcome measures (safety behaviors, worker and patient injury rates) were examined. Hospital safety climate scores were significantly correlated with clinical workers' safety behavior and patient and worker injury measures, although the effect sizes were smaller for the latter. Regression analyses revealed that perceptions of staffing levels and managerial commitment were significant predictors for all the safety outcome measures. Both patient-specific and more generic safety climate items were found to have significant impacts on safety outcome measures. This study demonstrated the influences of different aspects of hospital safety climate on both patient and worker safety outcomes. Moreover, it has been shown that in a hospital setting, a safety climate supporting safer patient care would also help to ensure worker safety. The Scottish Hospital Safety Questionnaire has proved to be a usable method of measuring both hospital safety climate as well as patient and worker safety outcomes. Copyright © 2013 National Safety Council and Elsevier Ltd. Published by Elsevier Ltd. All rights reserved.

Correlation between safety climate and contractor safety assessment programs in construction.

PubMed

Sparer, Emily H; Murphy, Lauren A; Taylor, Kathryn M; Dennerlein, Jack T

2013-12-01

Contractor safety assessment programs (CSAPs) measure safety performance by integrating multiple data sources together; however, the relationship between these measures of safety performance and safety climate within the construction industry is unknown. Four hundred and one construction workers employed by 68 companies on 26 sites and 11 safety managers employed by 11 companies completed brief surveys containing a nine-item safety climate scale developed for the construction industry. CSAP scores from ConstructSecure, Inc., an online CSAP database, classified these 68 companies as high or low scorers, with the median score of the sample population as the threshold. Spearman rank correlations evaluated the association between the CSAP score and the safety climate score at the individual level, as well as with various grouping methodologies. In addition, Spearman correlations evaluated the comparison between manager-assessed safety climate and worker-assessed safety climate. There were no statistically significant differences between safety climate scores reported by workers in the high and low CSAP groups. There were, at best, weak correlations between workers' safety climate scores and the company CSAP scores, with marginal statistical significance with two groupings of the data. There were also no significant differences between the manager-assessed safety climate and the worker-assessed safety climate scores. A CSAP safety performance score does not appear to capture safety climate, as measured in this study. The nature of safety climate in construction is complex, which may be reflective of the challenges in measuring safety climate within this industry. Am. J. Ind. Med. 56:1463-1472, 2013. © 2013 Wiley Periodicals, Inc. © 2013 Wiley Periodicals, Inc.

Drug Safety

MedlinePlus

... over-the-counter drug. The FDA evaluates the safety of a drug by looking at Side effects ... clinical trials The FDA also monitors a drug's safety after approval. For you, drug safety means buying ...

Perspectives of The Interagency Nuclear Safety Review Panel (INSRP) on future nuclear powered space missions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gray, L.B.; Pyatt, D.W.; Sholtis, J.A.

1993-01-10

The Interagency Nuclear Safety Review Panel (INSRP) has provided reviews of all nuclear powered spacecraft launched by the United States. The two most recent launches were Ulysses in 1990 and Galileo in 1989. One reactor was launched in 1965 (SNAP-10A). All other U.S. space missions have utilized radioisotopic thermoelectric generators (RTGs). There are several missions in the next few years that are to be nuclear powered, including one that would utilize the Topaz II reactor purchased from Russia. INSRP must realign itself to perform parallel safety assessments of a reactor powered space mission, which has not been done in aboutmore » thirty years, and RTG powered missions.« less

Disentangling the roles of safety climate and safety culture: Multi-level effects on the relationship between supervisor enforcement and safety compliance.

PubMed

Petitta, Laura; Probst, Tahira M; Barbaranelli, Claudio; Ghezzi, Valerio

2017-02-01

Despite increasing attention to contextual effects on the relationship between supervisor enforcement and employee safety compliance, no study has yet explored the conjoint influence exerted simultaneously by organizational safety climate and safety culture. The present study seeks to address this literature shortcoming. We first begin by briefly discussing the theoretical distinctions between safety climate and culture and the rationale for examining these together. Next, using survey data collected from 1342 employees in 32 Italian organizations, we found that employee-level supervisor enforcement, organizational-level safety climate, and autocratic, bureaucratic, and technocratic safety culture dimensions all predicted individual-level safety compliance behaviors. However, the cross-level moderating effect of safety climate was bounded by certain safety culture dimensions, such that safety climate moderated the supervisor enforcement-compliance relationship only under the clan-patronage culture dimension. Additionally, the autocratic and bureaucratic culture dimensions attenuated the relationship between supervisor enforcement and compliance. Finally, when testing the effects of technocratic safety culture and cooperative safety culture, neither safety culture nor climate moderated the relationship between supervisor enforcement and safety compliance. The results suggest a complex relationship between organizational safety culture and safety climate, indicating that organizations with particular safety cultures may be more likely to develop more (or less) positive safety climates. Moreover, employee safety compliance is a function of supervisor safety leadership, as well as the safety climate and safety culture dimensions prevalent within the organization. Copyright © 2016 Elsevier Ltd. All rights reserved.

Predicting safety culture: the roles of employer, operations manager and safety professional.

PubMed

Wu, Tsung-Chih; Lin, Chia-Hung; Shiau, Sen-Yu

2010-10-01

This study explores predictive factors in safety culture. In 2008, a sample 939 employees was drawn from 22 departments of a telecoms firm in five regions in central Taiwan. The sample completed a questionnaire containing four scales: the employer safety leadership scale, the operations manager safety leadership scale, the safety professional safety leadership scale, and the safety culture scale. The sample was then randomly split into two subsamples. One subsample was used for measures development, one for the empirical study. A stepwise regression analysis found four factors with a significant impact on safety culture (R²=0.337): safety informing by operations managers; safety caring by employers; and safety coordination and safety regulation by safety professionals. Safety informing by operations managers (ß=0.213) was by far the most significant predictive factor. The findings of this study provide a framework for promoting a positive safety culture at the group level. Crown Copyright © 2010. Published by Elsevier Ltd. All rights reserved.

Improving construction site safety through leader-based verbal safety communication.

PubMed

Kines, Pete; Andersen, Lars P S; Spangenberg, Soren; Mikkelsen, Kim L; Dyreborg, Johnny; Zohar, Dov

2010-10-01

The construction industry is one of the most injury-prone industries, in which production is usually prioritized over safety in daily on-site communication. Workers have an informal and oral culture of risk, in which safety is rarely openly expressed. This paper tests the effect of increasing leader-based on-site verbal safety communication on the level of safety and safety climate at construction sites. A pre-post intervention-control design with five construction work gangs is carried out. Foremen in two intervention groups are coached and given bi-weekly feedback about their daily verbal safety communications with their workers. Foremen-worker verbal safety exchanges (experience sampling method, n=1,693 interviews), construction site safety level (correct vs. incorrect, n=22,077 single observations), and safety climate (seven dimensions, n=105 questionnaires) are measured over a period of up to 42 weeks. Baseline measurements in the two intervention and three control groups reveal that foremen speak with their workers several times a day. Workers perceive safety as part of their verbal communication with their foremen in only 6-16% of exchanges, and the levels of safety at the sites range from 70-87% (correct observations). Measurements from baseline to follow-up in the two intervention groups reveal that safety communication between foremen and workers increases significantly in one of the groups (factor 7.1 increase), and a significant yet smaller increase is found when the two intervention groups are combined (factor 4.6). Significant increases in the level of safety are seen in both intervention groups (7% and 12% increases, respectively), particularly in regards to 'access ways' and 'railings and coverings' (39% and 84% increases, respectively). Increases in safety climate are seen in only one of the intervention groups with respect to their 'attention to safety.' No significant trend changes are seen in the three control groups on any of the three measures

CRITICALITY SAFETY CONTROLS AND THE SAFETY BASIS AT PFP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kessler, S

2009-04-21

With the implementation of DOE Order 420.1B, Facility Safety, and DOE-STD-3007-2007, 'Guidelines for Preparing Criticality Safety Evaluations at Department of Energy Non-Reactor Nuclear Facilities', a new requirement was imposed that all criticality safety controls be evaluated for inclusion in the facility Documented Safety Analysis (DSA) and that the evaluation process be documented in the site Criticality Safety Program Description Document (CSPDD). At the Hanford site in Washington State the CSPDD, HNF-31695, 'General Description of the FH Criticality Safety Program', requires each facility develop a linking document called a Criticality Control Review (CCR) to document performance of these evaluations. Chapter 5,more » Appendix 5B of HNF-7098, Criticality Safety Program, provided an example of a format for a CCR that could be used in lieu of each facility developing its own CCR. Since the Plutonium Finishing Plant (PFP) is presently undergoing Deactivation and Decommissioning (D&D), new procedures are being developed for cleanout of equipment and systems that have not been operated in years. Existing Criticality Safety Evaluations (CSE) are revised, or new ones written, to develop the controls required to support D&D activities. Other Hanford facilities, including PFP, had difficulty using the basic CCR out of HNF-7098 when first implemented. Interpretation of the new guidelines indicated that many of the controls needed to be elevated to TSR level controls. Criterion 2 of the standard, requiring that the consequence of a criticality be examined for establishing the classification of a control, was not addressed. Upon in-depth review by PFP Criticality Safety staff, it was not clear that the programmatic interpretation of criterion 8C could be applied at PFP. Therefore, the PFP Criticality Safety staff decided to write their own CCR. The PFP CCR provides additional guidance for the evaluation team to use by clarifying the evaluation criteria in DOE-STD-3007

SafetyAnalyst : software tools for safety management of specific highway sites

DOT National Transportation Integrated Search

2010-07-01

SafetyAnalyst provides a set of software tools for use by state and local highway agencies for highway safety management. SafetyAnalyst can be used by highway agencies to improve their programming of site-specific highway safety improvements. SafetyA...

[Liposomal-amphotericin B efficacy and safety].

PubMed

Hamada, Yukihiro; Komatsu, Toshiaki; Seto, Yoshinori; Matsubara, Hajime; Kume, Hikaru; Sunakawa, Keisuke; Yago, Kazuo

2010-03-01

Liposomal amphotericin B (L-AMB), a lipid-based amphotericin B formulation, has been used in Japan since June 2006 to treat fungal infection. In the 3 years since L-AMB was launched, few reports have been made on its status. To ensure its appropriate use, we restrospectively reviewed its efficacy and safety in treating fungal infections. 25 subjects with fungal infection treated with L-AMB from April 2007 until February 2008. Of those, 16 showed clinical improvement. Elevated serum creatinine occurred in 1 and decreased serum potassium in 6. We found a positive relationship between the serum potassium decrease and L-AMB dose. Logistic regression analysis of this relationship showed that serum potassium tended to fall on day 5 to 6 of L-AMB administration. While L-AMB appears highly effective in fungal infection, it requires serum potassium monitoring to ensure patient safety.

Final safety analysis report for the Galileo Mission: Volume 1, Reference design document

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The Galileo mission uses nuclear power sources called Radioisotope Thermoelectric Generators (RTGs) to provide the spacecraft's primary electrical power. Because these generators contain nuclear material, a Safety Analysis Report (SAR) is required. A preliminary SAR and an updated SAR were previously issued that provided an evolving status report on the safety analysis. As a result of the Challenger accident, the launch dates for both Galileo and Ulysses missions were later rescheduled for November 1989 and October 1990, respectively. The decision was made by agreement between the DOE and the NASA to have a revised safety evaluation and report (FSAR) preparedmore » on the basis of these revised vehicle accidents and environments. The results of this latest revised safety evaluation are presented in this document (Galileo FSAR). Volume I, this document, provides the background design information required to understand the analyses presented in Volumes II and III. It contains descriptions of the RTGs, the Galileo spacecraft, the Space Shuttle, the Inertial Upper Stage (IUS), the trajectory and flight characteristics including flight contingency modes, and the launch site. There are two appendices in Volume I which provide detailed material properties for the RTG.« less

NASA System Safety Handbook. Volume 1; System Safety Framework and Concepts for Implementation

NASA Technical Reports Server (NTRS)

Dezfuli, Homayoon; Benjamin, Allan; Everett, Christopher; Smith, Curtis; Stamatelatos, Michael; Youngblood, Robert

2011-01-01

System safety assessment is defined in NPR 8715.3C, NASA General Safety Program Requirements as a disciplined, systematic approach to the analysis of risks resulting from hazards that can affect humans, the environment, and mission assets. Achievement of the highest practicable degree of system safety is one of NASA's highest priorities. Traditionally, system safety assessment at NASA and elsewhere has focused on the application of a set of safety analysis tools to identify safety risks and formulate effective controls.1 Familiar tools used for this purpose include various forms of hazard analyses, failure modes and effects analyses, and probabilistic safety assessment (commonly also referred to as probabilistic risk assessment (PRA)). In the past, it has been assumed that to show that a system is safe, it is sufficient to provide assurance that the process for identifying the hazards has been as comprehensive as possible and that each identified hazard has one or more associated controls. The NASA Aerospace Safety Advisory Panel (ASAP) has made several statements in its annual reports supporting a more holistic approach. In 2006, it recommended that "... a comprehensive risk assessment, communication and acceptance process be implemented to ensure that overall launch risk is considered in an integrated and consistent manner." In 2009, it advocated for "... a process for using a risk-informed design approach to produce a design that is optimally and sufficiently safe." As a rationale for the latter advocacy, it stated that "... the ASAP applauds switching to a performance-based approach because it emphasizes early risk identification to guide designs, thus enabling creative design approaches that might be more efficient, safer, or both." For purposes of this preface, it is worth mentioning three areas where the handbook emphasizes a more holistic type of thinking. First, the handbook takes the position that it is important to not just focus on risk on an individual

Launching the dialogue: Safety and innovation as partners for success in advanced manufacturing.

PubMed

Geraci, C L; Tinkle, S S; Brenner, S A; Hodson, L L; Pomeroy-Carter, C A; Neu-Baker, N

2018-06-01

Emerging and novel technologies, materials, and information integrated into increasingly automated and networked manufacturing processes or into traditional manufacturing settings are enhancing the efficiency and productivity of manufacturing. Globally, there is a move toward a new era in manufacturing that is characterized by: (1) the ability to create and deliver more complex designs of products; (2) the creation and use of materials with new properties that meet a design need; (3) the employment of new technologies, such as additive and digital techniques that improve on conventional manufacturing processes; and (4) a compression of the time from initial design concept to the creation of a final product. Globally, this movement has many names, but "advanced manufacturing" has become the shorthand for this complex integration of material and technology elements that enable new ways to manufacture existing products, as well as new products emerging from new technologies and new design methods. As the breadth of activities associated with advanced manufacturing suggests, there is no single advanced manufacturing industry. Instead, aspects of advanced manufacturing can be identified across a diverse set of business sectors that use manufacturing technologies, ranging from the semiconductors and electronics to the automotive and pharmaceutical industries. The breadth and diversity of advanced manufacturing may change the occupational and environmental risk profile, challenge the basic elements of comprehensive health and safety (material, process, worker, environment, product, and general public health and safety), and provide an opportunity for development and dissemination of occupational and environmental health and safety (OEHS) guidance and best practices. It is unknown how much the risk profile of different elements of OEHS will change, thus requiring an evolution of health and safety practices. These changes may be accomplished most effectively through multi

76 FR 70953 - Pipeline Safety: Safety of Gas Transmission Pipelines

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-16

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part 192 [Docket ID PHMSA-2011-0023] RIN 2137-AE72 Pipeline Safety: Safety of Gas Transmission Pipelines AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA); DOT. ACTION: Advance notice of...

Safety climate and attitude as evaluation measures of organizational safety.

PubMed

Isla Díaz, R; Díaz Cabrera, D

1997-09-01

The main aim of this research is to develop a set of evaluation measures for safety attitudes and safety climate. Specifically it is intended: (a) to test the instruments; (b) to identify the essential dimensions of the safety climate in the airport ground handling companies; (c) to assess the quality of the differences in the safety climate for each company and its relation to the accident rate; (d) to analyse the relationship between attitudes and safety climate; and (e) to evaluate the influences of situational and personal factors on both safety climate and attitude. The study sample consisted of 166 subjects from three airport companies. Specifically, this research was centered on ground handling departments. The factor analysis of the safety climate instrument resulted in six factors which explained 69.8% of the total variance. We found significant differences in safety attitudes and climate in relation to type of enterprise.

Integrated Safety Analysis Tiers

NASA Technical Reports Server (NTRS)

Shackelford, Carla; McNairy, Lisa; Wetherholt, Jon

2009-01-01

Commercial partnerships and organizational constraints, combined with complex systems, may lead to division of hazard analysis across organizations. This division could cause important hazards to be overlooked, causes to be missed, controls for a hazard to be incomplete, or verifications to be inefficient. Each organization s team must understand at least one level beyond the interface sufficiently enough to comprehend integrated hazards. This paper will discuss various ways to properly divide analysis among organizations. The Ares I launch vehicle integrated safety analyses effort will be utilized to illustrate an approach that addresses the key issues and concerns arising from multiple analysis responsibilities.

Another Approach to Enhance Airline Safety: Using Management Safety Tools

NASA Technical Reports Server (NTRS)

Lu, Chien-tsug; Wetmore, Michael; Przetak, Robert

2006-01-01

The ultimate goal of conducting an accident investigation is to prevent similar accidents from happening again and to make operations safer system-wide. Based on the findings extracted from the investigation, the "lesson learned" becomes a genuine part of the safety database making risk management available to safety analysts. The airline industry is no exception. In the US, the FAA has advocated the usage of the System Safety concept in enhancing safety since 2000. Yet, in today s usage of System Safety, the airline industry mainly focuses on risk management, which is a reactive process of the System Safety discipline. In order to extend the merit of System Safety and to prevent accidents beforehand, a specific System Safety tool needs to be applied; so a model of hazard prediction can be formed. To do so, the authors initiated this study by reviewing 189 final accident reports from the National Transportation Safety Board (NTSB) covering FAR Part 121 scheduled operations. The discovered accident causes (direct hazards) were categorized into 10 groups Flight Operations, Ground Crew, Turbulence, Maintenance, Foreign Object Damage (FOD), Flight Attendant, Air Traffic Control, Manufacturer, Passenger, and Federal Aviation Administration. These direct hazards were associated with 36 root factors prepared for an error-elimination model using Fault Tree Analysis (FTA), a leading tool for System Safety experts. An FTA block-diagram model was created, followed by a probability simulation of accidents. Five case studies and reports were provided in order to fully demonstrate the usefulness of System Safety tools in promoting airline safety.

Special investigation report: Commercial space launch incident, launch procedure anomaly orbital sciences corporation PEGASUS/SCD-1, 80 nautical miles east of Cape Canaveral, Florida, February 9, 1993

NASA Astrophysics Data System (ADS)

This report explains the procedural anomaly that occurred during the launch sequence of an Orbital Sciences Corporation Pegasus expendable launch vehicle, which was subsequently deployed successfully from an NB-52B airplane, on 9 Feb. 1993. The safety issues discussed in the report include command, control and communications responsibility, launch crew fatigue, launch interphone procedures, efficiency of launch constraints, and the lack of common launch documents. Safety recommendations concerning these issues were made to the Department of Transportation, the National Aeronautics and Space Administration, and the Orbital Sciences Corporation.

Special Investigation Report: Commercial Space Launch Incident, Launch Procedure Anomaly Orbital Sciences Corporation PEGASUS/SCD-1, 80 Nautical Miles East of Cape Canaveral, Florida, February 9, 1993

NASA Technical Reports Server (NTRS)

1993-01-01

This report explains the procedural anomaly that occurred during the launch sequence of an Orbital Sciences Corporation Pegasus expendable launch vehicle, which was subsequently deployed successfully from an NB-52B airplane, on 9 Feb. 1993. The safety issues discussed in the report include command, control and communications responsibility, launch crew fatigue, launch interphone procedures, efficiency of launch constraints, and the lack of common launch documents. Safety recommendations concerning these issues were made to the Department of Transportation, the National Aeronautics and Space Administration, and the Orbital Sciences Corporation.

Safety leadership: extending workplace safety climate best practices across health care workforces.

PubMed

McCaughey, Deirdre; Halbesleben, Jonathon R B; Savage, Grant T; Simons, Tony; McGhan, Gwen E

2013-01-01

Hospitals within the United States consistently have injury rates that are over twice the national employee injury rate. Hospital safety studies typically investigate care providers rather than support service employees. Compounding the lack of evidence for this understudied population is the scant evidence that is available to examine the relationship of support service employees'perceptions of safety and work-related injuries. To examine this phenomenon, the purpose of this study was to investigate support service employees' perceptions of safety leadership and social support as well as the relationship of safety perception to levels of reported injuries. A nonexperimental survey was conducted with the data collected from hospital support service employees (n = 1,272) and examined. (1) relationships between safety leadership (supervisor and organization) and individual and unit safety perceptions; (2) the moderating effect of social support (supervisor and coworker) on individual and unit safety perceptions; and (3) the relationship of safety perception to reported injury rates. The survey items in this study were based on the items from the AHRQ Patient Safety Culture Survey and the U.S. National Health Care Surveys. Safety leadership (supervisor and organization) was found to be positively related to individual safety perceptions and unit safety grade as was supervisor and coworker support. Coworker support was found to positively moderate the following relationships: supervisor safety leadership and safety perceptions, supervisor safety leadership and unit safety grade, and senior management safety leadership and safety perceptions. Positive employee safety perceptions were found to have a significant relationship with lower reported injury rates. These findings suggest that safety leadership from supervisors and senior management as well as coworker support has positive implications for support service employees' perceptions of safety, which, in turn, are

14 CFR 417.111 - Launch plans.

Code of Federal Regulations, 2010 CFR

2010-01-01

... controls identified by a launch operator's ground safety analysis and implementation of the ground safety.... (ii) For each toxic propellant, any hazard controls and process constraints determined under the... classification and compatibility group as defined by part 420 of this chapter. (3) A graphic depiction of the...

19th JANNAF Safety and Environmental Protection Subcommittee Meeting. Volume 1

NASA Technical Reports Server (NTRS)

Cocchiaro, J. E. (Editor); Becker, D. L. (Editor)

2002-01-01

This volume, the first of two volumes, is a compilation of 22 unclassified/unlimited technical papers presented at the 19th Joint Army-Navy-NASA-Air Force (JANNAF) Safety & Environmental Protection Subcommittee Meeting. The meeting was held 18-21 March 2002 at the Sheraton Colorado Springs Hotel, Colorado Springs, Colorado. Topics covered include green energetic materials and life cycle pollution prevention; space launch range safety; propellant/munitions demilitarization, recycling, and reuse: and environmental and occupational health aspects of propellants and energetic materials.

Patient safety in thoracic surgery and European Society of Thoracic Surgeons checklist.

PubMed

Novoa, Nuria M

2015-04-01

Improving patient safety seems to be a new interesting clinical subject but, in fact, it is no new. It has to do with one of the oldest ethical principles of our profession: curing and not harming. The important research that has been done in a short period of time has brought in new insight to this complex area that is fast developing. The creation of safety managing systems will allow coordinating efforts from very different, although complementary, areas to create real safety culture and safety climate in every organization. In the surgical settings, teamwork is basic to provide good quality of care. Safety leaders in every team have an important role in establishing priorities, summarizing proposals, coordinating efforts, launching new initiatives and transmitting that safety efforts are worth taken. Preparedness and anticipation are key points for avoiding most of the diverse types of patient harm that can occur. As has been published, a great number of errors can be avoided simply using crosscheck based on specialized checklist that reviews every important detail of the procedure. This strategy has been demonstrated very useful at other high risk industries such as aviation, nuclear or food management. The Safe Surgery Saves Lives program launched in 2002 by the WHO has taught us that improvement is possible using a simple checklist. More complex and detail checklist can be more adequate for more complex procedures and settings. The proposed ESTS checklist reviews different areas of possible error in deeper detail allowing the finest adjustment of the patient before the skin incision. It has been recently released to the general thoracic community and monitors its use and usefulness has to be warrantied.

The effect of safety initiatives on safety performance: a longitudinal study.

PubMed

Hoonakker, Peter; Loushine, Todd; Carayon, Pascale; Kallman, James; Kapp, Andrew; Smith, Michael J

2005-07-01

Construction industry is one of the most dangerous industries, not only in the USA, but worldwide. In this longitudinal study we examined the effects of safety initiatives on the safety performance of construction companies. One of the measures commonly used in the USA to track a company's safety performance is the experience modification rate (EMR). The EMR is based on the company's safety records (injury claims) from the past three full years and is used to calculate the workers' compensation insurance premiums. In a longitudinal study, we studied the effects of safety efforts and initiatives on the EMR. The results show that safety initiatives and money spent on safety do improve safety performance, but only over time.

Orion Launch

NASA Image and Video Library

2014-12-05

A Delta IV Heavy rocket lifts off from Space Launch Complex 37 at Cape Canaveral Air Force Station in Florida carrying NASA's Orion spacecraft on an unpiloted flight test to Earth orbit. Liftoff was at 7:05 a.m. EST. During the two-orbit, four-and-a-half hour mission, engineers will evaluate the systems critical to crew safety, the launch abort system, the heat shield and the parachute system.

Associations between safety climate and safety management practices in the construction industry.

PubMed

Marín, Luz S; Lipscomb, Hester; Cifuentes, Manuel; Punnett, Laura

2017-06-01

Safety climate, a group-level measure of workers' perceptions regarding management's safety priorities, has been suggested as a key predictor of safety outcomes. However, its relationship with actual injury rates is inconsistent. We posit that safety climate may instead be a parallel outcome of workplace safety practices, rather than a determinant of workers' safety behaviors or outcomes. Using a sample of 25 commercial construction companies in Colombia, selected by injury rate stratum (high, medium, low), we examined the relationship between workers' safety climate perceptions and safety management practices (SMPs) reported by safety officers. Workers' perceptions of safety climate were independent of their own company's implementation of SMPs, as measured here, and its injury rates. However, injury rates were negatively related to the implementation of SMPs. Safety management practices may be more important than workers' perceptions of safety climate as direct predictors of injury rates. © 2017 Wiley Periodicals, Inc.

Dynamic Safety Cases for Through-Life Safety Assurance

NASA Technical Reports Server (NTRS)

Denney, Ewen; Pai, Ganesh; Habli, Ibrahim

2015-01-01

We describe dynamic safety cases, a novel operationalization of the concept of through-life safety assurance, whose goal is to enable proactive safety management. Using an example from the aviation systems domain, we motivate our approach, its underlying principles, and a lifecycle. We then identify the key elements required to move towards a formalization of the associated framework.

Agribusiness Safety. Module SH-15. Safety and Health.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on agribusiness safety is one of 50 modules concerned with job safety and health. Following the introduction, 11 objectives (each keyed to a page in the text) the student is expected to accomplish are listed (e.g., List at least two reasons for agribusiness safety standards). Then each objective is taught in detail, sometimes…

14 CFR 415.109 - Launch description.

Code of Federal Regulations, 2012 CFR

2012-01-01

...) Identification of any facilities at the launch site that will be used for launch processing and flight. (b... dimensions and weight; (iii) Location of all safety critical systems, including any flight termination hardware, tracking aids, or telemetry systems; (iv) Location of all major launch vehicle control systems...

14 CFR 415.109 - Launch description.

Code of Federal Regulations, 2013 CFR

2013-01-01

...) Identification of any facilities at the launch site that will be used for launch processing and flight. (b... dimensions and weight; (iii) Location of all safety critical systems, including any flight termination hardware, tracking aids, or telemetry systems; (iv) Location of all major launch vehicle control systems...

14 CFR 415.109 - Launch description.

Code of Federal Regulations, 2014 CFR

2014-01-01

...) Identification of any facilities at the launch site that will be used for launch processing and flight. (b... dimensions and weight; (iii) Location of all safety critical systems, including any flight termination hardware, tracking aids, or telemetry systems; (iv) Location of all major launch vehicle control systems...

Safety, Health, and Fire Prevention Guide for Hospital Safety Managers

DTIC Science & Technology

1993-03-01

Safety committee S 2-5 Oxygen quality assurance program 0 2-6 Safety and fire prevention library 0 2-7 Safety services to Dental Activities • 2-8...Chapter 2 Safety Management 2-1. Safety policy statement Health Services Command (HSC) Supplement (Suppl) 1 to Army Regulation (AR) 385-10 and the...Management. (b) The medical staff. (c) The nursing service . (d) Logistics. (e) Nutritional care. (f) Preventive medicine. * 2-3 USAEHA TG No. 152 March 1993 (g

49 CFR 385.11 - Notification of safety rating and safety fitness determination.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 5 2011-10-01 2011-10-01 false Notification of safety rating and safety fitness... REGULATIONS SAFETY FITNESS PROCEDURES General § 385.11 Notification of safety rating and safety fitness... notice of remedial directive will constitute the notice of safety fitness determination. If FMCSA has not...

49 CFR 385.11 - Notification of safety rating and safety fitness determination.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 5 2010-10-01 2010-10-01 false Notification of safety rating and safety fitness... REGULATIONS SAFETY FITNESS PROCEDURES General § 385.11 Notification of safety rating and safety fitness... notice of remedial directive will constitute the notice of safety fitness determination. If FMCSA has not...

Safety Learning, Organizational Contradictions and the Dynamics of Safety Practice

ERIC Educational Resources Information Center

Ripamonti, Silvio Carlo; Scaratti, Giuseppe

2015-01-01

Purpose: The purpose of this paper is to explore the enactment of safety routines in a transshipment port. Research on work safety and reliability has largely neglected the role of the workers' knowledge in practice in the enactment of organisational safety. The workers' lack of compliance with safety regulations represents an enduring problem…

Safety sans Frontières: An International Safety Culture Model.

PubMed

Reader, Tom W; Noort, Mark C; Shorrock, Steven; Kirwan, Barry

2015-05-01

The management of safety culture in international and culturally diverse organizations is a concern for many high-risk industries. Yet, research has primarily developed models of safety culture within Western countries, and there is a need to extend investigations of safety culture to global environments. We examined (i) whether safety culture can be reliably measured within a single industry operating across different cultural environments, and (ii) if there is an association between safety culture and national culture. The psychometric properties of a safety culture model developed for the air traffic management (ATM) industry were examined in 17 European countries from four culturally distinct regions of Europe (North, East, South, West). Participants were ATM operational staff (n = 5,176) and management staff (n = 1,230). Through employing multigroup confirmatory factor analysis, good psychometric properties of the model were established. This demonstrates, for the first time, that when safety culture models are tailored to a specific industry, they can operate consistently across national boundaries and occupational groups. Additionally, safety culture scores at both regional and national levels were associated with country-level data on Hofstede's five national culture dimensions (collectivism, power distance, uncertainty avoidance, masculinity, and long-term orientation). MANOVAs indicated safety culture to be most positive in Northern Europe, less so in Western and Eastern Europe, and least positive in Southern Europe. This indicates that national cultural traits may influence the development of organizational safety culture, with significant implications for safety culture theory and practice. © 2015 Society for Risk Analysis.

Safety Handbook.

ERIC Educational Resources Information Center

Montgomery County Public Schools, Rockville, MD.

Safety policies, procedures, and related information are presented in this manual to assist school personnel in a continuing program of accident prevention. Chapter 1 discusses safety education and accident prevention in general. Chapter 2 covers traffic regulations relating to school safety patrols, school bus transportation, bicycles, and…

Safety and Liability.

ERIC Educational Resources Information Center

Berthelot, Ronald J.; And Others

1982-01-01

This series of five articles highlights Pensacola Junior College's occupational safety course, involving simulated emergencies, Florida's standards for teacher liability, electrical safety in the classroom and laboratory, color coding for machine safety, and Florida industrial arts safety instructional materials. (SK)

Rocket propulsion hazard summary: Safety classification, handling experience and application to space shuttle payload

NASA Technical Reports Server (NTRS)

Pennington, D. F.; Man, T.; Persons, B.

1977-01-01

The DOT classification for transportation, the military classification for quantity distance, and hazard compatibility grouping used to regulate the transportation and storage of explosives are presented along with a discussion of tests used in determining sensitivity of propellants to an impact/shock environment in the absence of a large explosive donor. The safety procedures and requirements of a Scout launch vehicle, Western and Eastern Test Range, and the Minuteman, Delta, and Poseidon programs are reviewed and summarized. Requirements of the space transportation system safety program include safety reviews from the subsystem level to the completed payload. The Scout safety procedures will satisfy a portion of these requirements but additional procedures need to be implemented to comply with the safety requirements for Shuttle operation from the Eastern Test Range.

Assisting New York Dairy Farms with Preparing for OSHA Safety Inspections.

PubMed

Tinc, Pamela J; Carrabba, Jim; Meyerhoff, Anna; Horsman, Melissa

2018-01-01

In 2013, the Occupational Safety and Health Administration announced a Local Emphasis Program targeted at New York farmers. This program involved random inspections of dairy farms across the state. This article provides an overview of the efforts made in New York to prepare farmers for these inspections. As a result of this program launch, several safety services offered by the New York Center for Agricultural Medicine and Health were significantly impacted, and required expansion and modification in order to meet the needs of New York farmers.

Ares I-X Range Safety Simulation Verification and Analysis IV and V

NASA Technical Reports Server (NTRS)

Tarpley, Ashley; Beaty, James; Starr, Brett

2010-01-01

NASA s ARES I-X vehicle launched on a suborbital test flight from the Eastern Range in Florida on October 28, 2009. NASA generated a Range Safety (RS) flight data package to meet the RS trajectory data requirements defined in the Air Force Space Command Manual 91-710. Some products included in the flight data package were a nominal ascent trajectory, ascent flight envelope trajectories, and malfunction turn trajectories. These data are used by the Air Force s 45th Space Wing (45SW) to ensure Eastern Range public safety and to make flight termination decisions on launch day. Due to the criticality of the RS data in regards to public safety and mission success, an independent validation and verification (IV&V) effort was undertaken to accompany the data generation analyses to ensure utmost data quality and correct adherence to requirements. Multiple NASA centers and contractor organizations were assigned specific products to IV&V. The data generation and IV&V work was coordinated through the Launch Constellation Range Safety Panel s Trajectory Working Group, which included members from the prime and IV&V organizations as well as the 45SW. As a result of the IV&V efforts, the RS product package was delivered with confidence that two independent organizations using separate simulation software generated data to meet the range requirements and yielded similar results. This document captures ARES I-X RS product IV&V analysis, including the methodology used to verify inputs, simulation, and output data for an RS product. Additionally a discussion of lessons learned is presented to capture advantages and disadvantages to the IV&V processes used.

Final safety analysis report for the Galileo Mission: Volume 2: Summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The General Purpose Heat Source Radioisotope Thermoelectric Generator (GPHS-RTG) will be used as the prime source of electric power for the spacecraft on the Galileo mission. The use of radioactive material in these missions necessitates evaluations of the radiological risks that may be encountered by launch complex personnel and by the Earth's general population resulting from postulated malfunctions or failures occurring in the mission operations. The purpose of the Final Safety Analysis Report (FSAR) is to present the analyses and results of the latest evaluation of the nuclear safety potential of the GPHS-RTG as employed in the Galileo mission. Thismore » evaluation is an extension of earlier work that addressed the planned 1986 launch using the Space Shuttle Vehicle with the Centaur as the upper stage. This extended evaluation represents the launch by the Space Shuttle/IUS vehicle. The IUS stage has been selected as the vehicle to be used to boost the Galileo spacecraft into the Earth escape trajectory after the parking orbit is attained.« less

Medication safety.

PubMed

Keohane, Carol A; Bates, David W

2008-03-01

Patient safety is a state of mind, not a technology. The technologies used in the medical setting represent tools that must be properly designed, used well, and assessed on an on-going basis. Moreover, in all settings, building a culture of safety is pivotal for improving safety, and many nontechnologic approaches, such as medication reconciliation and teaching patients about their medications, are also essential. This article addresses the topic of medication safety and examines specific strategies being used to decrease the incidence of medication errors across various clinical settings.

Critical safety assurance factors for manned spacecraft - A fire safety perspective

NASA Technical Reports Server (NTRS)

Rodney, George A.

1990-01-01

Safety assurance factors for manned spacecraft are discussed with a focus on the Space Station Freedom. A hazard scenario is provided to demonstrate a process commonly used by safety engineers and other analysts to identify onboard safety risks. Fire strategies are described, including a review of fire extinguishing agents being considered for the Space Station. Lessons learned about fire safety technology in other areas are also noted. NASA and industry research on fire safety applications is discussed. NASA's approach to ensuring safety for manned spacecraft is addressed in the context of its multidiscipline program.

76 FR 78820 - Safety Zone; City of Beaufort's Tricentennial New Year's Eve Fireworks Display, Beaufort River...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-20

...-AA00 Safety Zone; City of Beaufort's Tricentennial New Year's Eve Fireworks Display, Beaufort River... establishing a temporary safety zone on the Beaufort River, in Beaufort, South Carolina, during the City of... Carolina. The fireworks will be launched from a barge, which will be located on the Beaufort River. The...

Advanced missions safety. Volume 3: Appendices. Part 1: Space shuttle rescue capability

NASA Technical Reports Server (NTRS)

1972-01-01

The space shuttle rescue capability is analyzed as a part of the advanced mission safety study. The subjects discussed are: (1) mission evaluation, (2) shuttle configurations and performance, (3) performance of shuttle-launched tug system, (4) multiple pass grazing reentry from lunar orbit, (5) ground launched ascent and rendezvous time, (6) cost estimates, and (7) parallel-burn space shuttle configuration.

Safety: Preventive Medicine.

ERIC Educational Resources Information Center

Kotula, John R.; Digenakis, Anthony

1985-01-01

Underscores the need for community colleges to practice safety within the institutions and to instruct students in workplace safety procedures and requirements. Reviews Occupational Safety and Health Act (OSHA) regulations and their impact on industry and education. Looks at the legal responsibilities of colleges for safety. (DMM)

Improving safety culture through the health and safety organization: a case study.

PubMed

Nielsen, Kent J

2014-02-01

International research indicates that internal health and safety organizations (HSO) and health and safety committees (HSC) do not have the intended impact on companies' safety performance. The aim of this case study at an industrial plant was to test whether the HSO can improve company safety culture by creating more and better safety-related interactions both within the HSO and between HSO members and the shop-floor. A quasi-experimental single case study design based on action research with both quantitative and qualitative measures was used. Based on baseline mapping of safety culture and the efficiency of the HSO three developmental processes were started aimed at the HSC, the whole HSO, and the safety representatives, respectively. Results at follow-up indicated a marked improvement in HSO performance, interaction patterns concerning safety, safety culture indicators, and a changed trend in injury rates. These improvements are interpreted as cultural change because an organizational double-loop learning process leading to modification of the basic assumptions could be identified. The study provides evidence that the HSO can improve company safety culture by focusing on safety-related interactions. © 2013. Published by Elsevier Ltd and National Safety Council.

Does the concept of safety culture help or hinder systems thinking in safety?

PubMed

Reiman, Teemu; Rollenhagen, Carl

2014-07-01

The concept of safety culture has become established in safety management applications in all major safety-critical domains. The idea that safety culture somehow represents a "systemic view" on safety is seldom explicitly spoken out, but nevertheless seem to linger behind many safety culture discourses. However, in this paper we argue that the "new" contribution to safety management from safety culture never really became integrated with classical engineering principles and concepts. This integration would have been necessary for the development of a more genuine systems-oriented view on safety; e.g. a conception of safety in which human, technological, organisational and cultural factors are understood as mutually interacting elements. Without of this integration, researchers and the users of the various tools and methods associated with safety culture have sometimes fostered a belief that "safety culture" in fact represents such a systemic view about safety. This belief is, however, not backed up by theoretical or empirical evidence. It is true that safety culture, at least in some sense, represents a holistic term-a totality of factors that include human, organisational and technological aspects. However, the departure for such safety culture models is still human and organisational factors rather than technology (or safety) itself. The aim of this paper is to critically review the various uses of the concept of safety culture as representing a systemic view on safety. The article will take a look at the concepts of culture and safety culture based on previous studies, and outlines in more detail the theoretical challenges in safety culture as a systems concept. The paper also presents recommendations on how to make safety culture more systemic. Copyright © 2013 Elsevier Ltd. All rights reserved.

Aerospace Safety Advisory Panel report to the NASA acting administrator

NASA Technical Reports Server (NTRS)

1986-01-01

The level of activity of the Aerospace Safety Advisory Panel was increased smewhat during 1985 in concert with the increased mission rate of the National Space Transportation System, the evolutionary changes in management and operation of that program, and the preparation of the Vandenberg Launch Site; the implementation of the Program Definition Phase of the Space Station Program; and the actual flight testing of the X-29 research aircraft. Impending payload STS missions and NASA's overall aircraft operations are reviewed. The safety aspects of the LEASAT salvage mission were assessed. The findings and recommendation of the committee are summerized.

Obtaining Valid Safety Data for Software Safety Measurement and Process Improvement

NASA Technical Reports Server (NTRS)

Basili, Victor r.; Zelkowitz, Marvin V.; Layman, Lucas; Dangle, Kathleen; Diep, Madeline

2010-01-01

We report on a preliminary case study to examine software safety risk in the early design phase of the NASA Constellation spaceflight program. Our goal is to provide NASA quality assurance managers with information regarding the ongoing state of software safety across the program. We examined 154 hazard reports created during the preliminary design phase of three major flight hardware systems within the Constellation program. Our purpose was two-fold: 1) to quantify the relative importance of software with respect to system safety; and 2) to identify potential risks due to incorrect application of the safety process, deficiencies in the safety process, or the lack of a defined process. One early outcome of this work was to show that there are structural deficiencies in collecting valid safety data that make software safety different from hardware safety. In our conclusions we present some of these deficiencies.

Collaborative Approaches in Developing Environmental and Safety Management Systems for Commercial Space Transportation

NASA Technical Reports Server (NTRS)

Zee, Stacey; Murray, D.

2009-01-01

The Federal Aviation Administration (FAA), Office of Commercial Space Transportation (AST) licenses and permits U.S. commercial space launch and reentry activities, and licenses the operation of non-federal launch and reentry sites. ASTs mission is to ensure the protection of the public, property, and the national security and foreign policy interests of the United States during commercial space transportation activities and to encourage, facilitate, and promote U.S. commercial space transportation. AST faces unique challenges of ensuring the protection of public health and safety while facilitating and promoting U.S. commercial space transportation. AST has developed an Environmental Management System (EMS) and a Safety Management System (SMS) to help meet its mission. Although the EMS and SMS were developed independently, the systems share similar elements. Both systems follow a Plan-Do-Act-Check model in identifying potential environmental aspects or public safety hazards, assessing significance in terms of severity and likelihood of occurrence, developing approaches to reduce risk, and verifying that the risk is reduced. This paper will describe the similarities between ASTs EMS and SMS elements and how AST is building a collaborative approach in environmental and safety management to reduce impacts to the environment and risks to the public.

Safety in the Chemical Laboratory: Developing Departmental Safety Procedures.

ERIC Educational Resources Information Center

Renfrew, Malcolm M., Ed.; Palladino, George F.

1980-01-01

Presents rationale and guidelines for development of Safety Standard Operating Procedures (Safety SOP) specific for local conditions. Includes an outline of a Safety SOP developed for a department primarily focused on undergraduate education with a wide variety of expertise from common laborer to PhD with 20 years experience. (Author/JN)

Global Precipitation Measurement (GPM) Safety Inhibit Timeline Tool

NASA Technical Reports Server (NTRS)

Dion, Shirley

2012-01-01

The Global Precipitation Measurement (GPM) Observatory is a joint mission under the partnership by National Aeronautics and Space Administration (NASA) and the Japan Aerospace Exploration Agency (JAXA), Japan. The NASA Goddard Space Flight Center (GSFC) has the lead management responsibility for NASA on GPM. The GPM program will measure precipitation on a global basis with sufficient quality, Earth coverage, and sampling to improve prediction of the Earth's climate, weather, and specific components of the global water cycle. As part of the development process, NASA built the spacecraft (built in-house at GSFC) and provided one instrument (GPM Microwave Imager (GMI) developed by Ball Aerospace) JAXA provided the launch vehicle (H2-A by MHI) and provided one instrument (Dual-Frequency Precipitation Radar (DPR) developed by NTSpace). Each instrument developer provided a safety assessment which was incorporated into the NASA GPM Safety Hazard Assessment. Inhibit design was reviewed for hazardous subsystems which included the High Gain Antenna System (HGAS) deployment, solar array deployment, transmitter turn on, propulsion system release, GMI deployment, and DPR radar turn on. The safety inhibits for these listed hazards are controlled by software. GPM developed a "pathfinder" approach for reviewing software that controls the electrical inhibits. This is one of the first GSFC in-house programs that extensively used software controls. The GPM safety team developed a methodology to document software safety as part of the standard hazard report. As part of this process a new tool "safety inhibit time line" was created for management of inhibits and their controls during spacecraft buildup and testing during 1& Tat GSFC and at the Range in Japan. In addition to understanding inhibits and controls during 1& T the tool allows the safety analyst to better communicate with others the changes in inhibit states with each phase of hardware and software testing. The tool was very

14 CFR 417.9 - Launch site responsibility.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Launch site responsibility. 417.9 Section 417.9 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION LICENSING LAUNCH SAFETY General and License Terms and Conditions § 417.9 Launch...

14 CFR 417.9 - Launch site responsibility.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Launch site responsibility. 417.9 Section 417.9 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION LICENSING LAUNCH SAFETY General and License Terms and Conditions § 417.9 Launch...

Effects of organizational safety on employees' proactivity safety behaviors and occupational health and safety management systems in Chinese high-risk small-scale enterprises.

PubMed

Mei, Qiang; Wang, Qiwei; Liu, Suxia; Zhou, Qiaomei; Zhang, Jingjing

2018-06-07

Based on the characteristics of small-scale enterprises, the improvement of occupational health and safety management systems (OHS MS) needs an effective intervention. This study proposed a structural equation model and examined the relationships of perceived organization support for safety (POSS), person-organization safety fit (POSF) and proactivity safety behaviors with safety management, safety procedures and safety hazards identification. Data were collected from 503 employees of 105 Chinese high-risk small-scale enterprises over 6 months. The results showed that both POSS and POSF were positively related to improvement in safety management, safety procedures and safety hazards identification through proactivity safety behaviors. Our findings provide a new perspective on organizational safety for improving OHS MS for small-scale enterprises and extend the application of proactivity safety behaviors.

Staying silent about safety issues: Conceptualizing and measuring safety silence motives.

PubMed

Manapragada, Archana; Bruk-Lee, Valentina

2016-06-01

Communication between employees and supervisors about safety-related issues is an important component of a safe workplace. When supervisors receive information from employees about safety issues, they may gain otherwise-missed opportunities to correct these issues and/or prevent negative safety outcomes. A series of three studies were conducted to identify various safety silence motives, which describe the reasons that employees do not speak up to supervisors about safety-related issues witnessed in the workplace, and to develop a tool to assess these motives. Results suggest that employees stay silent about safety issues based on perceptions of altering relationships with others (relationship-based), perceptions of the organizational climate (climate-based), the assessment of the safety issue (issue-based), or characteristics of the job (job-based). We developed a 17-item measure to assess these four motives, and initial evidence was found for the construct and incremental validity of the safety silence motives measure in a sample of nurses. Copyright © 2016 Elsevier Ltd. All rights reserved.

NASA Safety Manual. Volume 3: System Safety

NASA Technical Reports Server (NTRS)

1970-01-01

This Volume 3 of the NASA Safety Manual sets forth the basic elements and techniques for managing a system safety program and the technical methods recommended for use in developing a risk evaluation program that is oriented to the identification of hazards in aerospace hardware systems and the development of residual risk management information for the program manager that is based on the hazards identified. The methods and techniques described in this volume are in consonance with the requirements set forth in NHB 1700.1 (VI), Chapter 3. This volume and future volumes of the NASA Safety Manual shall not be rewritten, reprinted, or reproduced in any manner. Installation implementing procedures, if necessary, shall be inserted as page supplements in accordance with the provisions of Appendix A. No portion of this volume or future volumes of the NASA Safety Manual shall be invoked in contracts.

Consideration of future safety consequences: a new predictor of employee safety.

PubMed

Probst, Tahira M; Graso, Maja; Estrada, Armando X; Greer, Sarah

2013-06-01

Compliance with safety behaviors is often associated with longer term benefits, but may require some short-term sacrifices. This study examines the extent to which consideration of future safety consequences (CFSC) predicts employee safety outcomes. Two field studies were conducted to evaluate the reliability and validity of the newly developed Consideration of Future Safety Consequences (CFSC) scale. Surveys containing the CFSC scale and other measures of safety attitudes, behaviors, and outcomes were administered during working hours to a sample of 128 pulp and paper mill employees; after revising the CFSC scale based on these initial results, follow-up survey data were collected in a second sample of 212 copper miners. In Study I, CFSC was predictive of employee safety knowledge and motivation, compliance, safety citizenship behaviors, accident reporting attitudes and behaviors, and workplace injuries - even after accounting for conscientiousness and demographic variables. Moreover, the effects of CFSC on the variables generally appear to be direct, as opposed to mediated by safety knowledge or motivation. These findings were largely replicated in Study II. CFSC appears to be an important personality construct that may predict those individuals who are more likely to comply with safety rules and have more positive safety outcomes. Future research should examine the longitudinal stability of CFSC to determine the extent to which this construct is a stable trait, rather than a safety attitude amenable to change over time or following an intervention. Copyright © 2013 Elsevier Ltd. All rights reserved.

eLaunch Hypersonics: An Advanced Launch System

NASA Technical Reports Server (NTRS)

Starr, Stanley

2010-01-01

This presentation describes a new space launch system that NASA can and should develop. This approach can significantly reduce ground processing and launch costs, improve reliability, and broaden the scope of what we do in near earth orbit. The concept (not new) is to launch a re-usable air-breathing hypersonic vehicle from a ground based electric track. This vehicle launches a final rocket stage at high altitude/velocity for the final leg to orbit. The proposal here differs from past studies in that we will launch above Mach 1.5 (above transonic pinch point) which further improves the efficiency of air breathing, horizontal take-off launch systems. The approach described here significantly reduces cost per kilogram to orbit, increases safety and reliability of the boost systems, and reduces ground costs due to horizontal-processing. Finally, this approach provides significant technology transfer benefits for our national infrastructure.

First Aid and Safety

MedlinePlus

... First-Aid Kit Food Safety for Your Family Gun Safety Halloween Candy Hints Household Safety Checklists Household ... Climbing, and Grabbing Household Safety: Preventing Injuries From Firearms Household Safety: Preventing Injuries in the Crib Household ...

Safety self-efficacy and safety performance: potential antecedents and the moderation effect of standardization.

PubMed

Katz-Navon, Tal; Naveh, Eitan; Stern, Zvi

2007-01-01

The purpose of this paper is to suggest a new safety self-efficacy construct and to explore its antecedents and interaction with standardization to influence in-patient safety. The paper used a survey of 161 nurses using a self-administered questionnaire over a 14-day period in two large Israeli general hospitals. Nurses answered questions relating to four safety self-efficacy antecedents: enactive mastery experiences; managers as safety role models; verbal persuasion; and safety priority, that relate to the perceived level of standardization and safety self-efficacy. Confirmatory factor analysis was used to assess the scale's construct validity. Regression models were used to test hypotheses regarding the antecedents and influence of safety self-efficacy. Results indicate that: managers as safety role models; distributing safety information; and priority given to safety, contributed to safety self-efficacy. Additionally, standardization moderated the effects of safety self-efficacy and patient safety such that safety self-efficacy was positively associated with patient safety when standardization was low rather than high. Hospital managers should be aware of individual motivations as safety self-efficacy when evaluating the potential influence of standardization on patient safety. Theoretically, the study introduces a new safety self-efficacy concept, and captures its antecedents and influence on safety performance. Also, the study suggests safety self-efficacy as a boundary condition for the influence of standardization on safety performance. Implementing standardization in healthcare is problematic because not all processes can be standardized. In this case, self-efficacy plays an important role in securing patient safety. Hence, safety self-efficacy may serve as a "substitute-for-standardization," by promoting staff behaviors that affect patient safety.

Safety huddles to proactively identify and address electronic health record safety

PubMed Central

Menon, Shailaja; Singh, Hardeep; Giardina, Traber D; Rayburn, William L; Davis, Brenda P; Russo, Elise M

2017-01-01

Objective: Methods to identify and study safety risks of electronic health records (EHRs) are underdeveloped and largely depend on limited end-user reports. “Safety huddles” have been found useful in creating a sense of collective situational awareness that increases an organization’s capacity to respond to safety concerns. We explored the use of safety huddles for identifying and learning about EHR-related safety concerns. Design: Data were obtained from daily safety huddle briefing notes recorded at a single midsized tertiary-care hospital in the United States over 1 year. Huddles were attended by key administrative, clinical, and information technology staff. We conducted a content analysis of huddle notes to identify what EHR-related safety concerns were discussed. We expanded a previously developed EHR-related error taxonomy to categorize types of EHR-related safety concerns recorded in the notes. Results: On review of daily huddle notes spanning 249 days, we identified 245 EHR-related safety concerns. For our analysis, we defined EHR technology to include a specific EHR functionality, an entire clinical software application, or the hardware system. Most concerns (41.6%) involved “EHR technology working incorrectly,” followed by 25.7% involving “EHR technology not working at all.” Concerns related to “EHR technology missing or absent” accounted for 16.7%, whereas 15.9% were linked to “user errors.” Conclusions: Safety huddles promoted discussion of several technology-related issues at the organization level and can serve as a promising technique to identify and address EHR-related safety concerns. Based on our findings, we recommend that health care organizations consider huddles as a strategy to promote understanding and improvement of EHR safety. PMID:28031286

From the traditional concept of safety management to safety integrated with quality.

PubMed

García Herrero, Susana; Mariscal Saldaña, Miguel Angel; Manzanedo del Campo, Miguel Angel; Ritzel, Dale O

2002-01-01

This editorial reviews the evolution of the concepts of safety and quality that have been used in the traditional workplace. The traditional programs of safety are explored showing strengths and weaknesses. The concept of quality management is also viewed. Safety management and quality management principles, stages, and measurement are highlighted. The concepts of quality and safety guarantee are assessed. Total Quality Management concepts are reviewed and applied to safety quality. Total safety management principles are discussed. Finally, an analysis of the relationship between quality and safety from data collected from a company in Spain is presented.

Fire safety

Treesearch

Robert H. White; Mark A. Dietenberger

1999-01-01

Fire safety is an important concern in all types of construction. The high level of national concern for fire safety is reflected in limitations and design requirements in building codes. These code requirements are discussed in the context of fire safety design and evaluation in the initial section of this chapter. Since basic data on fire behavior of wood products...

Querying Safety Cases

NASA Technical Reports Server (NTRS)

Denney, Ewen W.; Naylor, Dwight; Pai, Ganesh

2014-01-01

Querying a safety case to show how the various stakeholders' concerns about system safety are addressed has been put forth as one of the benefits of argument-based assurance (in a recent study by the Health Foundation, UK, which reviewed the use of safety cases in safety-critical industries). However, neither the literature nor current practice offer much guidance on querying mechanisms appropriate for, or available within, a safety case paradigm. This paper presents a preliminary approach that uses a formal basis for querying safety cases, specifically Goal Structuring Notation (GSN) argument structures. Our approach semantically enriches GSN arguments with domain-specific metadata that the query language leverages, along with its inherent structure, to produce views. We have implemented the approach in our toolset AdvoCATE, and illustrate it by application to a fragment of the safety argument for an Unmanned Aircraft System (UAS) being developed at NASA Ames. We also discuss the potential practical utility of our query mechanism within the context of the existing framework for UAS safety assurance.

Safety Characteristics in System Application of Software for Human Rated Exploration Missions for the 8th IAASS Conference

NASA Technical Reports Server (NTRS)

Mango, Edward J.

2016-01-01

NASA and its industry and international partners are embarking on a bold and inspiring development effort to design and build an exploration class space system. The space system is made up of the Orion system, the Space Launch System (SLS) and the Ground Systems Development and Operations (GSDO) system. All are highly coupled together and dependent on each other for the combined safety of the space system. A key area of system safety focus needs to be in the ground and flight application software system (GFAS). In the development, certification and operations of GFAS, there are a series of safety characteristics that define the approach to ensure mission success. This paper will explore and examine the safety characteristics of the GFAS development. The GFAS system integrates the flight software packages of the Orion and SLS with the ground systems and launch countdown sequencers through the 'agile' software development process. A unique approach is needed to develop the GFAS project capabilities within this agile process. NASA has defined the software development process through a set of standards. The standards were written during the infancy of the so-called industry 'agile development' movement and must be tailored to adapt to the highly integrated environment of human exploration systems. Safety of the space systems and the eventual crew on board is paramount during the preparation of the exploration flight systems. A series of software safety characteristics have been incorporated into the development and certification efforts to ensure readiness for use and compatibility with the space systems. Three underlining factors in the exploration architecture require the GFAS system to be unique in its approach to ensure safety for the space systems, both the flight as well as the ground systems. The first are the missions themselves, which are exploration in nature, and go far beyond the comfort of low Earth orbit operations. The second is the current exploration

The Strategy for Safety: Preventing Crises through Safety Audits

ERIC Educational Resources Information Center

Schwartz, Sara Goldsmith

2013-01-01

In this article the author demonstrates the importance of school safety audits and describes what schools should focus on in a safety audit. Ultimately, each school should determine its own safety audit strategy based on its unique circumstances, including the type of community within which it is located, the age of the students it serves, and the…

Safety and Liability Aspects of Solar Power Satellites

NASA Astrophysics Data System (ADS)

Jakhu, Ram S.; Howard, Diane

2010-09-01

It is an undisputed fact that the global need for energy will grow exponentially in the future and the search for alternative energy sources will intensify. One alternative source will be space based solar power(SSP), to be collected in space and transmitted to Earth by solar power satellites(SPS). As the appropriate technology becomes proven, the economic and operational viability for the launch of SPS system(s) will, to a large extent, depend upon favorable political and legal determinants. One of such determinants relates to safety risks and possible liability of the operator(s) of SPS system(s). This paper identifies safety risks of, and analyses liability for, damage caused by SPS. Issues, specifically analyzed mainly under international law, include damage caused(in outer space, in the air and on the Earth) by electronic transmission, and mechanisms to manage liability including inter alia insurance coverage, waivers of liability, and dispute settlement mechanisms. The paper contains recommendations for the concerned governments(and their respective private entities) to take regulatory precautions in order to avoid the risks of possible liability and thereby enhances the chances for launch and operation of SPS system(s).

Improving safety on rural local and tribal roads safety toolkit.

DOT National Transportation Integrated Search

2014-08-01

Rural roadway safety is an important issue for communities throughout the country and presents a challenge for state, local, and Tribal agencies. The Improving Safety on Rural Local and Tribal Roads Safety Toolkit was created to help rural local ...

Exploring relationships between hospital patient safety culture and Consumer Reports safety scores.

PubMed

Smith, Scott Alan; Yount, Naomi; Sorra, Joann

2017-02-16

A number of private and public companies calculate and publish proprietary hospital patient safety scores based on publicly available quality measures initially reported by the U.S. federal government. This study examines whether patient safety culture perceptions of U.S. hospital staff in a large national survey are related to publicly reported patient safety ratings of hospitals. The Agency for Healthcare Research and Quality Hospital Survey on Patient Safety Culture (Hospital SOPS) assesses provider and staff perceptions of hospital patient safety culture. Consumer Reports (CR), a U.S. based non-profit organization, calculates and shares with its subscribers a Hospital Safety Score calculated annually from patient experience survey data and outcomes data gathered from federal databases. Linking data collected during similar time periods, we analyzed relationships between staff perceptions of patient safety culture composites and the CR Hospital Safety Score and its five components using multiple multivariate linear regressions. We analyzed data from 164 hospitals, with patient safety culture survey responses from 140,316 providers and staff, with an average of 856 completed surveys per hospital and an average response rate per hospital of 56%. Higher overall Hospital SOPS composite average scores were significantly associated with higher overall CR Hospital Safety Scores (β = 0.24, p < 0.05). For 10 of the 12 Hospital SOPS composites, higher patient safety culture scores were associated with higher CR patient experience scores on communication about medications and discharge. This study found a relationship between hospital staff perceptions of patient safety culture and the Consumer Reports Hospital Safety Score, which is a composite of patient experience and outcomes data from federal databases. As hospital managers allocate resources to improve patient safety culture within their organizations, their efforts may also indirectly improve consumer

The roles and functions of safety professionals in Taiwan: Comparing the perceptions of safety professionals and safety educators.

PubMed

Wu, Tsung-Chih

2011-10-01

The perspectives of both internal and external members have to be considered when developing safety curricula. This study discusses perceptional differences between safety educators (SEs) and safety professionals (SPs) regarding the function of SPs. The findings will serve as a reference framework for the establishment of core safety competencies and the development of safety curricula for SPs. 248 respondents, including both SEs and SPs, completed self-administered questionnaires, which included the 45-item safety function scale (SFS). Nine factors were extracted from the scale using exploratory factor analysis (EFA), namely inspection and research, regulatory tasks, emergency procedures and settlement of damage, management and financial affairs, culture change, problem identification and analysis, developing and implementing solutions, knowledge management, and training and communications. Descriptive statistical results indicated that SPs and SEs hold differing views on the rank of the frequency of safety functions. MANOVA results indicated that SPs' perceptions of developing and implementing solutions, training and communications, inspection and research, and management and financial affairs were significantly higher than that of SEs. On the other hand, SE's perceptions regarding participation in regulatory tasks were significantly higher than those of SPs. Based on these results, the author suggests that a clear communication channel should be established between universities and industry to reduce the gap between the perceptions of SEs and SPs. The results of the study are statistically and practically significant. In addition to serving as a reference for the development of safety curricula, the results are also conducive to the establishment of SP roles and functions. Ultimately the development of more suitable safety curricula would open up employment competition for students who graduate from safety-related programs. SPs, on the other hand, can correctly

Suborbital Safety Technical Committee- Summary of Proposed Standards & Guidelines

NASA Astrophysics Data System (ADS)

Quinn, Andy; Atencia Yepez, Amaya; Klicker, Michael; Howard, Diane; Verstraeten, Joram; Other Suborbital Safety TC Members

2013-09-01

There are currently no international safety standards and guidelines to assist designers, operators and authorities in the suborbital domain. There is a launch licensing regime in the United States (US) to assist the forerunners of the suborbital domain however this does not provide a safety approval for the vehicle against set standards or does not have an acceptable level of safety to achieve in terms of design or operation. In Europe a certification framework may be implemented however this (or any regulatory framework) is not in place as yet. This paper summarises the 5 tasks thus far completed by the International Association for the Advancement of Space Safety (IAASS) Suborbital Safety Technical Committee (SS TC) in terms of deriving standards and guidelines for the suborbital domain. The SS TC comprises members from the suborbital industry (US and European vehicle designers), safety experts, legal experts, medical/training experts, prospective spaceport operators and members from the US and European authorities (though these members cannot directly steer the standards and guidelines - they can merely review them for interest and comment on non-policy aspects). The SS TC has been divided into three working groups (WG): Regulatory WG, Technical WG and Operations WG. The 5 tasks that are summarised in this paper include: Regulatory WG - (Task 1) Clarify and promote regulatory framework for suborbital flights (including discussions on Space Law 'v' Air Law for suborbital domain); Technical WG - (Task 1) Defining & Alignment (globally) of Safety Criteria for Suborbital domain using industry best practices, (Task 2) Software/complex hardware certification for suborbital flights; Operations WG - (Task 1) Flight Crew and Spaceflight Participant Medical and Training Standards & Guidelines for suborbital flight, (Task 2) Spaceport Safety Management System. This paper also details the next set of standards and guidelines that will be derived by the SS TC. The paper

10 CFR 70.62 - Safety program and integrated safety analysis.

Code of Federal Regulations, 2013 CFR

2013-01-01

...; (iv) Potential accident sequences caused by process deviations or other events internal to the... of occurrence of each potential accident sequence identified pursuant to paragraph (c)(1)(iv) of this... have experience in nuclear criticality safety, radiation safety, fire safety, and chemical process...

10 CFR 70.62 - Safety program and integrated safety analysis.

Code of Federal Regulations, 2014 CFR

2014-01-01

...; (iv) Potential accident sequences caused by process deviations or other events internal to the... of occurrence of each potential accident sequence identified pursuant to paragraph (c)(1)(iv) of this... have experience in nuclear criticality safety, radiation safety, fire safety, and chemical process...

10 CFR 70.62 - Safety program and integrated safety analysis.

Code of Federal Regulations, 2012 CFR

2012-01-01

...; (iv) Potential accident sequences caused by process deviations or other events internal to the... of occurrence of each potential accident sequence identified pursuant to paragraph (c)(1)(iv) of this... have experience in nuclear criticality safety, radiation safety, fire safety, and chemical process...

Safety in the Workplace.

ERIC Educational Resources Information Center

Shaw, Richard

1999-01-01

Addresses workplace safety needs and tips for helping an organization achieve a high level of safety. Tips include showing administration commitment, establishing retribution-free reporting of safety problems and violations, rewarding excellent safety effort, and allowing no compromises in following safety procedures. (GR)

14 CFR 415.119 - Launch plans.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Launch plans. 415.119 Section 415.119... From a Non-Federal Launch Site § 415.119 Launch plans. An applicant's safety review document must contain the plans required by § 417.111 of this chapter, except for the countdown plan of § 417.111(l) of...

An investigation of pre-launch and in-flight STS range safety radio signal degradation and dropout

NASA Technical Reports Server (NTRS)

Mcdonald, Malcolm W.

1991-01-01

The range safety system (RSS) transmitters operate at a frequency of 416.500 MHz. The transmitting antennas transmit left circularly polarized waves, and the shuttle range safety system (SRSS) receiving antennas onboard the shuttle vehicle receive left circular polarization. Preliminary explanations are proposed for many of the observed fluctuations in signal levels. It is recommended that experiments and further investigation be performed to test the validity of certain of these explanations.

Bathroom safety - adults

MedlinePlus

Older adult bathroom safety; Falls - bathroom safety ... You may need to have safety bars in your bathroom. These grab bars should be secured vertically or horizontally to the wall, not diagonally. DO NOT use ...

Verification and Implementation of Operations Safety Controls for Flight Missions

NASA Technical Reports Server (NTRS)

Jones, Cheryl L.; Smalls, James R.; Carrier, Alicia S.

2010-01-01

Approximately eleven years ago, the International Space Station launched the first module from Russia, the Functional Cargo Block (FGB). Safety and Mission Assurance (S&MA) Operations (Ops) Engineers played an integral part in that endeavor by executing strict flight product verification as well as continued staffing of S&MA's console in the Mission Evaluation Room (MER) for that flight mission. How were these engineers able to conduct such a complicated task? They conducted it based on product verification that consisted of ensuring that safety requirements were adequately contained in all flight products that affected crew safety. S&MA Ops engineers apply both systems engineering and project management principles in order to gain a appropriate level of technical knowledge necessary to perform thorough reviews which cover the subsystem(s) affected. They also ensured that mission priorities were carried out with a great detail and success.

Arizona Traffic Safety Education, K-3. Pedestrian Safety, Grade 3.

ERIC Educational Resources Information Center

Mesa Public Schools, AZ.

One in a series designed to assist Arizona elementary and junior high school teachers in developing children's traffic safety skills, this curriculum guide contains nine lessons on pedestrian safety for use in grade 3. Introductory information provided for the teacher includes basic highway safety concepts, stressing communication methods for…

Safety Teams: An Approach to Engage Students in Laboratory Safety

ERIC Educational Resources Information Center

Alaimo, Peter J.; Langenhan, Joseph M.; Tanner, Martha J.; Ferrenberg, Scott M.

2010-01-01

We developed and implemented a yearlong safety program into our organic chemistry lab courses that aims to enhance student attitudes toward safety and to ensure students learn to recognize, demonstrate, and assess safe laboratory practices. This active, collaborative program involves the use of student "safety teams" and includes…

Arizona Traffic Safety Education, K-8. Pedestrian Safety, Grade 2.

ERIC Educational Resources Information Center

Mesa Public Schools, AZ.

One in a series designed to assist Arizona elementary and junior high school teachers in developing children's traffic safety skills, this curriculum guide contains eight lessons on pedestrian safety for use in grade 2. Introductory information provided for the teacher includes basic highway safety concepts, stressing communication methods for…

75 FR 73946 - Worker Safety and Health Program: Safety Conscious Work Environment

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-30

... DEPARTMENT OF ENERGY 10 CFR Part 851 Worker Safety and Health Program: Safety Conscious Work... Nuclear Regulatory Commission's ``Safety-Conscious Work Environment'' guidelines as a model. DOE published.... Second, not only would instituting a ``Safety-Conscious Work Environment'' by regulation be redundant...

76 FR 303 - Pipeline Safety: Safety of On-Shore Hazardous Liquid Pipelines

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-04

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part 195 [Docket ID PHMSA-2010-0229] RIN 2137-AE66 Pipeline Safety: Safety of On-Shore Hazardous Liquid Pipelines AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION: Notice of...

Integrated Safety Risk Reduction Approach to Enhancing Human-Rated Spaceflight Safety

NASA Astrophysics Data System (ADS)

Mikula, J. F. Kip

2005-12-01

This paper explores and defines the current accepted concept and philosophy of safety improvement based on a Reliability enhancement (called here Reliability Enhancement Based Safety Theory [REBST]). In this theory a Reliability calculation is used as a measure of the safety achieved on the program. This calculation may be based on a math model or a Fault Tree Analysis (FTA) of the system, or on an Event Tree Analysis (ETA) of the system's operational mission sequence. In each case, the numbers used in this calculation are hardware failure rates gleaned from past similar programs. As part of this paper, a fictional but representative case study is provided that helps to illustrate the problems and inaccuracies of this approach to safety determination. Then a safety determination and enhancement approach based on hazard, worst case analysis, and safety risk determination (called here Worst Case Based Safety Theory [WCBST]) is included. This approach is defined and detailed using the same example case study as shown in the REBST case study. In the end it is concluded that an approach combining the two theories works best to reduce Safety Risk.

American transit safety award : award winning safety program

DOT National Transportation Integrated Search

1950-01-01

Prepared ca. 1950. As the result of the widespread interest in safety evident among companies at meetings of the ATA Small Operations Division, the Division's Administrative Committee considered it desirable to put together a compilation of safety pr...

Car Seat Safety

MedlinePlus

... Staying Safe Videos for Educators Search English Español Car Seat Safety KidsHealth / For Parents / Car Seat Safety ... certified child passenger safety technician.) Guidelines for Choosing Car Seats Choose a seat with a label that ...

Arizona Traffic Safety Education, K-8. Passenger Safety, Grade 3.

ERIC Educational Resources Information Center

Mesa Public Schools, AZ.

One in a series designed to assist Arizona elementary and junior high school teachers in developing children's traffic safety skills, this curriculum guide contains four lessons and an appendix of school bus safety tips for use in grade 3. Introductory information provided for the teacher includes basic highway safety concepts, stressing…

Public Risk Criteria and Rationale for Commercial Launch and Reentry

NASA Astrophysics Data System (ADS)

Wilde, P. D.

2012-01-01

This paper summarizes the rationale for risk criteria intended to protect the public during commercial spaceflight, including launch, reentry, and suborbital missions. The recommended approach includes: (1) safety goals to guide periodic updates of the quantitative collective risk limits if warranted based on the quantity of launch and reentry missions; the demonstrated safety record and benefits provided; technological capabilities and maturity of the industry; and contemporary attitudes about the risks from commercial space transportation; (2) separate limits on the risks from each type of mission with explicit definitions of the extent of launch and reentry missions; and (3) quantitative risk limits consistent with the safety goals. For current conditions, the author's recommends (a) maximum of 1E-6 probability of casualty per-mission (b) a maximum of 100E-6 expected casualties per-mission, and (c) equal per-mission risk limits for orbital and suborbital launches, as well as controlled and uncontrolled reentries.

Workplace Safety Manual

DOT National Transportation Integrated Search

2002-04-10

N.C. Department of Transportation's workplace safety manual for online viewing. : The government of North Carolina feels that all employees are responsible for safety : on the job. This manual describes and sets out the operation of safety program : ...

The safety review and approval process for space nuclear power sources

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennett, G.L.

1991-01-01

Over the past 30 yr. the U.S. Government has evolved a process for the safety review and launch approval of nuclear power sources (NPSs) proposed for launch into space. This process, which involves a number of governmental agencies, ensures that the various postulated accident scenarios are considered, that the responses of the NPSs to the accident environments are assessed, and that appropriate elements of the Federal Government are involved in the launch approval. This process has worked very well in the successful launches of 37 radioisotope thermoelectric generators and 1 reactor by the United States since 1961. Particular attention willmore » be focused on the recent launch of the Galileo spacecraft. 19 refs., 12 figs., 4 tabs.« less

Safety and IVHM

NASA Technical Reports Server (NTRS)

Goebel, Kai

2012-01-01

When we address safety in a book on the business case for IVHM, the question arises whether safety isn t inherently in conflict with the need of operators to run their systems as efficiently (and as cost effectively) as possible. The answer may be that the system needs to be just as safe as needed, but not significantly more. That begs the next question: How safe is safe enough? Several regulatory bodies provide guidelines for operational safety, but irrespective of that, operators do not want their systems to be known as lacking safety. We illuminate the role of safety within the context of IVHM.

Safety-I, Safety-II and Resilience Engineering.

PubMed

Patterson, Mary; Deutsch, Ellen S

2015-12-01

In the quest to continually improve the health care delivered to patients, it is important to understand "what went wrong," also known as Safety-I, when there are undesired outcomes, but it is also important to understand, and optimize "what went right," also known as Safety-II. The difference between Safety-I and Safety-II are philosophical as well as pragmatic. Improving health care delivery involves understanding that health care delivery is a complex adaptive system; components of that system impact, and are impacted by, the actions of other components of the system. Challenges to optimal care include regular, irregular and unexampled threats. This article addresses the dangers of brittleness and miscalibration, as well as the value of adaptive capacity and margin. These qualities can, respectively, detract from or contribute to the emergence of organizational resilience. Resilience is characterized by the ability to monitor, react, anticipate, and learn. Finally, this article celebrates the importance of humans, who make use of system capabilities and proactively mitigate the effects of system limitations to contribute to successful outcomes. Copyright © 2015 Mosby, Inc. All rights reserved.

Safety behavior: Job demands, job resources, and perceived management commitment to safety.

PubMed

Hansez, Isabelle; Chmiel, Nik

2010-07-01

The job demands-resources model posits that job demands and resources influence outcomes through job strain and work engagement processes. We test whether the model can be extended to effort-related "routine" safety violations and "situational" safety violations provoked by the organization. In addition we test more directly the involvement of job strain than previous studies which have used burnout measures. Structural equation modeling provided, for the first time, evidence of predicted relationships between job strain and "routine" violations and work engagement with "routine" and "situational" violations, thereby supporting the extension of the job demands-resources model to safety behaviors. In addition our results showed that a key safety-specific construct 'perceived management commitment to safety' added to the explanatory power of the job demands-resources model. A predicted path from job resources to perceived management commitment to safety was highly significant, supporting the view that job resources can influence safety behavior through both general motivational involvement in work (work engagement) and through safety-specific processes.

The Role of Safety Culture in Influencing Provider Perceptions of Patient Safety.

PubMed

Bishop, Andrea C; Boyle, Todd A

2016-12-01

To determine how provider perceptions of safety culture influence their involvement in patient safety practices. Health-care providers were surveyed in 2 tertiary hospitals located in Atlantic Canada, composed of 4 units in total. The partial least squares (PLS) approach to structural equation modeling was used to analyze the data. Latent variables provider PLS model encompassed the hypothesized relationships between provider characteristics, safety culture, perceptions of patient safety practices, and actual performance of patient safety practices, using the Health Belief Model (HBM) as a guide. Data analysis was conducted using SmartPLS. A total of 113 health-care providers completed a survey out of an eligible 318, representing a response rate of 35.5%. The final PLS model showed acceptable internal consistency with all four latent variables having a composite reliability score above the recommended 0.70 cutoff value (safety culture = 0.86, threat = 0.76, expectations = 0.83, PS practices = 0.75). Discriminant validity was established, and all path coefficients were found to be significant at the α = 0.05 level using nonparametric bootstrapping. The survey results show that safety culture accounted for 34% of the variance in perceptions of threat and 42% of the variance in expectations. This research supports the role that safety culture plays in the promotion and maintenance of patient safety activities for health-care providers. As such, it is recommended that the introduction of new patient safety strategies follow a thorough exploration of an organization's safety culture.

A primer for highway safety professionals : advancing pedestrian and bicyclist safety.

DOT National Transportation Integrated Search

2016-04-01

Communities across the county are encouraging walking and biking to meet safety, health, livability, equity, and mobility goals. This primer is intended for highway safety professionals, including State Highway Safety Officials, as well as their part...

Are health professionals' perceptions of patient safety related to figures on safety incidents?

PubMed

Martijn, Lucie; Harmsen, Mirjam; Gaal, Sander; Mettes, Dirk; van Dulmen, Simone; Wensing, Michel

2013-10-01

The study aims to explore whether health care professionals' perceptions of patient safety in their practice were associated with the number of patient safety incidents identified in patient records. Seventy primary care practices of general practice, general dental practice, midwifery practices and allied health care practices were used in the study. A retrospective audit of 50 patient records was performed to identify patient safety incidents in each of the practices and a survey among health professionals to identify their perceptions of patient safety. All health professions felt that 'communication breakdowns inside the practice' as well as 'communication breakdowns outside the practice' and 'reporting of patient safety concerns' were a threat to patient safety in their work setting. We found little association between the perceptions of health professionals and the number of safety incidents. The only item with a significant relation to a higher number of safety incidents referred to the perception of 'communication problems outside the practice' as a threat to patient safety. This study indicates that the assessment of professionals' perceptions may be complementary to observed safety incidents, but not linked to an objective measure of patient safety. © 2012 John Wiley & Sons Ltd.

[How patient safety programmes can be successfully implemented - an example from Switzerland].

PubMed

Kobler, Irene; Mascherek, Anna; Bezzola, Paula

2015-01-01

Internationally, the implementation of patient safety programmes poses a major challenge. In the first part, we will demonstrate that various measures have been found to be effective in the literature but that they often do not reach the patient because their implementation proves difficult. Difficulties arise from both the complexity of the interventions themselves and from different organisational settings in individual hospitals. The second part specifically describes the implementation of patient safety improvement programmes in Switzerland and discusses measures intended to bridge the gap between the theory and practice of implementation in Switzerland. Then, the national pilot programme to improve patient safety in surgery is presented, which was launched by the federal Swiss government and has been implemented by the patient safety foundation. Procedures, challenges and highlights in implementing the programme in Switzerland on a national level are outlined. Finally, first (preliminary) results are presented and critically discussed. Copyright © 2015. Published by Elsevier GmbH.

The International Safety Framework for nuclear power source applications in outer space-Useful and substantial guidance

NASA Astrophysics Data System (ADS)

Summerer, L.; Wilcox, R. E.; Bechtel, R.; Harbison, S.

2015-06-01

In 2009, the International Safety Framework for Nuclear Power Source Applications in Outer Space was adopted, following a multi-year process that involved all major space faring nations under the auspices of a partnership between the UN Committee on the Peaceful Uses of Outer Space and the International Atomic Energy Agency. The Safety Framework reflects an international consensus on best practices to achieve safety. Following the 1992 UN Principles Relevant to the Use of Nuclear Power Sources in Outer Space, it is the second attempt by the international community to draft guidance promoting the safety of applications of nuclear power sources in space missions. NPS applications in space have unique safety considerations compared with terrestrial applications. Mission launch and outer space operational requirements impose size, mass and other space environment limitations not present for many terrestrial nuclear facilities. Potential accident conditions could expose nuclear power sources to extreme physical conditions. The Safety Framework is structured to provide guidance for both the programmatic and technical aspects of safety. In addition to sections containing specific guidance for governments and for management, it contains technical guidance pertinent to the design, development and all mission phases of space NPS applications. All sections of the Safety Framework contain elements directly relevant to engineers and space mission designers for missions involving space nuclear power sources. The challenge for organisations and engineers involved in the design and development processes of space nuclear power sources and applications is to implement the guidance provided in the Safety Framework by integrating it into the existing standard space mission infrastructure of design, development and operational requirements, practices and processes. This adds complexity to the standard space mission and launch approval processes. The Safety Framework is deliberately

[Recommendations for inspections of the French nuclear safety authority].

PubMed

Rousse, C; Chauvet, B

2015-10-01

The French nuclear safety authority is responsible for the control of radiation protection in radiotherapy since 2002. Controls are based on the public health and the labour codes and on the procedures defined by the controlled health care facility for its quality and safety management system according to ASN decision No. 2008-DC-0103. Inspectors verify the adequacy of the quality and safety management procedures and their implementation, and select process steps on the basis of feedback from events notified to ASN. Topics of the inspection are communicated to the facility at the launch of a campaign, which enables them to anticipate the inspectors' expectations. In cases where they are not physicians, inspectors are not allowed to access information covered by medical confidentiality. The consulted documents must therefore be expunged of any patient-identifying information. Exchanges before the inspection are intended to facilitate the provision of documents that may be consulted. Finally, exchange slots between inspectors and the local professionals must be organized. Based on improvements achieved by the health care centres and on recommendations from a joint working group of radiotherapy professionals and the nuclear safety authority, changes will be made in the control procedure that will be implemented when developing the inspection program for 2016-2019. Copyright © 2015. Published by Elsevier SAS.

Laboratory safety and the WHO World Alliance for Patient Safety.

PubMed

McCay, Layla; Lemer, Claire; Wu, Albert W

2009-06-01

Laboratory medicine has been a pioneer in the field of patient safety; indeed, the College of American Pathology first called attention to the issue in 1946. Delivering reliable laboratory results has long been considered a priority, as the data produced in laboratory medicine have the potential to critically influence individual patients' diagnosis and management. Until recently, most attention on laboratory safety has focused on the analytic stage of laboratory medicine. Addressing this stage has led to significant and impressive improvements in the areas over which laboratories have direct control. However, recent data demonstrate that pre- and post-analytical phases are at least as vulnerable to errors; to further improve patient safety in laboratory medicine, attention must now be focused on the pre- and post-analytic phases, and the concept of patient safety as a multi-disciplinary, multi-stage and multi-system concept better understood. The World Alliance for Patient Safety (WAPS) supports improvement of patient safety globally and provides a potential framework for considering the total testing process.

Improving safety in small enterprises through an integrated safety management intervention.

PubMed

Kines, Pete; Andersen, Dorte; Andersen, Lars Peter; Nielsen, Kent; Pedersen, Louise

2013-02-01

This study tests the applicability of a participatory behavior-based injury prevention approach integrated with safety culture initiatives. Sixteen small metal industry enterprises (10-19 employees) are randomly assigned to receive the intervention or not. Safety coaching of owners/managers result in the identification of 48 safety tasks, 85% of which are solved at follow-up. Owner/manager led constructive dialogue meetings with workers result in the prioritization of 29 tasks, 79% of which are accomplished at follow-up. Intervention enterprises have significant increases on six of eight safety-perception-survey factors, while comparisons increase on only one factor. Both intervention and comparison enterprises demonstrate significant increases in their safety observation scores. Interview data validate and supplement these results, providing some evidence for behavior change and the initiation of safety culture change. Given that over 95% of enterprises in most countries have less than 20 employees, there is great potential for adapting this integrated approach to other industries. Copyright © 2012 National Safety Council and Elsevier Ltd. All rights reserved.

Product Engineering Class in the Software Safety Risk Taxonomy for Building Safety-Critical Systems

NASA Technical Reports Server (NTRS)

Hill, Janice; Victor, Daniel

2008-01-01

When software safety requirements are imposed on legacy safety-critical systems, retrospective safety cases need to be formulated as part of recertifying the systems for further use and risks must be documented and managed to give confidence for reusing the systems. The SEJ Software Development Risk Taxonomy [4] focuses on general software development issues. It does not, however, cover all the safety risks. The Software Safety Risk Taxonomy [8] was developed which provides a construct for eliciting and categorizing software safety risks in a straightforward manner. In this paper, we present extended work on the taxonomy for safety that incorporates the additional issues inherent in the development and maintenance of safety-critical systems with software. An instrument called a Software Safety Risk Taxonomy Based Questionnaire (TBQ) is generated containing questions addressing each safety attribute in the Software Safety Risk Taxonomy. Software safety risks are surfaced using the new TBQ and then analyzed. In this paper we give the definitions for the specialized Product Engineering Class within the Software Safety Risk Taxonomy. At the end of the paper, we present the tool known as the 'Legacy Systems Risk Database Tool' that is used to collect and analyze the data required to show traceability to a particular safety standard

Recognizing Job Safety Hazards. Module SH-09. Safety and Health.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on recognizing job safety hazards is one of 50 modules concerned with job safety and health. This module details employee and employer responsibilities in correcting and monitoring safety hazards. Following the introduction, 10 objectives (each keyed to a page in the text) the student is expected to accomplish are listed (e.g.,…

Note on evaluating safety performance of road infrastructure to motivate safety competition.

PubMed

Han, Sangjin

2016-01-01

Road infrastructures are usually developed and maintained by governments or public sectors. There is no competitor in the market of their jurisdiction. This monopolic feature discourages road authorities from improving the level of safety with proactive motivation. This study suggests how to apply a principle of competition for roads, in particular by means of performance evaluation. It first discusses why road infrastructure has been slow in safety oriented development and management in respect of its business model. Then it suggests some practical ways of how to promote road safety between road authorities, particularly by evaluating safety performance of road infrastructure. These are summarized as decision of safety performance indicators, classification of spatial boundaries, data collection, evaluation, and reporting. Some consideration points are also discussed to make safety performance evaluation on road infrastructure lead to better road safety management.

Vocational Education Safety Instruction Manual.

ERIC Educational Resources Information Center

Cropley, Russell, Ed.; Doherty, Susan Sloan, Ed.

This manual describes four program areas in vocational education safety instruction: (1) introduction to a safety program; (2) resources to ensure laboratory safety; (3) safety program implementation; and (4) safety rules and safety tests. The safety rules and tests included in section four are for the most common tools and machines used in…

Patient Safety Executive Walkarounds

PubMed Central

Feitelberg, Steven P

2006-01-01

The KP Patient Safety Executive Walkarounds Program in the KP San Diego Service Area was developed to provide routine opportunities for senior KP leaders, staff, and clinicians to discuss patient safety concerns proactively, working closely with our labor partners to foster a culture of safety that supports our staff and physicians. Throughout the KP San Diego Service Area, the Walkarounds program plays a major part in promoting responsible identification and reporting of patient safety issues. Because each staff member has an equal voice in discussing patient safety concerns, the program enables all employees—union and nonunion alike—to engage directly in discussions about improving patient safety. The KPSC leadership has recognized this program as a major demonstration that the leadership supports patient safety and promotes reporting of safety issues in a “just culture.” PMID:21519438

76 FR 73570 - Pipeline Safety: Miscellaneous Changes to Pipeline Safety Regulations

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-29

... pipeline facilities to facilitate the removal of liquids and other materials from the gas stream. These... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Parts... Changes to Pipeline Safety Regulations AGENCY: Pipeline and Hazardous Materials Safety Administration...

NASA Software Safety Standard

NASA Technical Reports Server (NTRS)

Rosenberg, Linda

1997-01-01

If software is a critical element in a safety critical system, it is imperative to implement a systematic approach to software safety as an integral part of the overall system safety programs. The NASA-STD-8719.13A, "NASA Software Safety Standard", describes the activities necessary to ensure that safety is designed into software that is acquired or developed by NASA, and that safety is maintained throughout the software life cycle. A PDF version, is available on the WWW from Lewis. A Guidebook that will assist in the implementation of the requirements in the Safety Standard is under development at the Lewis Research Center (LeRC). After completion, it will also be available on the WWW from Lewis.

Auto Safety

MedlinePlus

... certified child passenger safety technician to assist you.) Guidelines for Choosing a Safety Seat Choose a seat ... and are between 8 and 12 years old. Guidelines for Choosing a Booster Seat Choose a seat ...

Sun Safety

MedlinePlus

... the Sun? Are There Benefits to Spending Time Outdoors? Statistics Behavior Rates Sun Safety Tips for Men ... and yourself from skin cancer. Stay sun-safe outdoors and discourage indoor and outdoor tanning. Sun Safety ...

Taking ownership of safety. What are the active ingredients of safety coaching and how do they impact safety outcomes in critical offshore working environments?

PubMed

Krauesslar, Victoria; Avery, Rachel E; Passmore, Jonathan

2015-01-01

Safety coaching interventions have become a common feature in the safety critical offshore working environments of the North Sea. Whilst the beneficial impact of coaching as an organizational tool has been evidenced, there remains a question specifically over the use of safety coaching and its impact on behavioural change and producing safe working practices. A series of 24 semi-structured interviews were conducted with three groups of experts in the offshore industry: safety coaches, offshore managers and HSE directors. Using a thematic analysis approach, several significant themes were identified across the three expert groups including connecting with and creating safety ownership in the individual, personal significance and humanisation, ingraining safety and assessing and measuring a safety coach's competence. Results suggest clear utility of safety coaching when applied by safety coaches with appropriate coach training and understanding of safety issues in an offshore environment. The current work has found that the use of safety coaching in the safety critical offshore oil and gas industry is a powerful tool in managing and promoting a culture of safety and care.

The relationship between organizational leadership for safety and learning from patient safety events.

PubMed

Ginsburg, Liane R; Chuang, You-Ta; Berta, Whitney Blair; Norton, Peter G; Ng, Peggy; Tregunno, Deborah; Richardson, Julia

2010-06-01

To examine the relationship between organizational leadership for patient safety and five types of learning from patient safety events (PSEs). Forty-nine general acute care hospitals in Ontario, Canada. A nonexperimental design using cross-sectional surveys of hospital patient safety officers (PSOs) and patient care managers (PCMs). PSOs provided data on organization-level learning from (a) minor events, (b) moderate events, (c) major near misses, (d) major event analysis, and (e) major event dissemination/communication. PCMs provided data on organizational leadership (formal and informal) for patient safety. Hospitals were the unit of analysis. Seemingly unrelated regression was used to examine the influence of formal and informal leadership for safety on the five types of learning from PSEs. The interaction between leadership and hospital size was also examined. Formal organizational leadership for patient safety is an important predictor of learning from minor, moderate, and major near-miss events, and major event dissemination. This relationship is significantly stronger for small hospitals (<100 beds). We find support for the relationship between patient safety leadership and patient safety behaviors such as learning from safety events. Formal leadership support for safety is of particular importance in small organizations where the economic burden of safety programs is disproportionately large and formal leadership is closer to the front lines.

Safety analysts training

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bolton, P.

The purpose of this task was to support ESH-3 in providing Airborne Release Fraction and Respirable Fraction training to safety analysts at LANL who perform accident analysis, hazard analysis, safety analysis, and/or risk assessments at nuclear facilities. The task included preparation of materials for and the conduct of two 3-day training courses covering the following topics: safety analysis process; calculation model; aerosol physic concepts for safety analysis; and overview of empirically derived airborne release fractions and respirable fractions.

76 FR 22033 - Safety Zone; Red River Safety Zone, Red River, MN

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-20

...-AAOO Safety Zone; Red River Safety Zone, Red River, MN AGENCY: Coast Guard, DHS. ACTION: Temporary... a temporary safety zone on the Red River, MN. This safety zone is being established to ensure the... Red River in the State of Minnesota north of a line drawn across latitude 46[deg]20'00'' N, including...

Request for Naval Reactors Comment on Proposed Prometheus Space Flight Nuclear Reactor High Tier Reactor Safety Requirements and for Naval Reactors Approval to Transmit These Requirements to JPL

DOE Office of Scientific and Technical Information (OSTI.GOV)

D. Kokkinos

2005-04-28

The purpose of this letter is to request Naval Reactors comments on the nuclear reactor high tier requirements for the PROMETHEUS space flight reactor design, pre-launch operations, launch, ascent, operation, and disposal, and to request Naval Reactors approval to transmit these requirements to Jet Propulsion Laboratory to ensure consistency between the reactor safety requirements and the spacecraft safety requirements. The proposed PROMETHEUS nuclear reactor high tier safety requirements are consistent with the long standing safety culture of the Naval Reactors Program and its commitment to protecting the health and safety of the public and the environment. In addition, the philosophymore » on which these requirements are based is consistent with the Nuclear Safety Policy Working Group recommendations on space nuclear propulsion safety (Reference 1), DOE Nuclear Safety Criteria and Specifications for Space Nuclear Reactors (Reference 2), the Nuclear Space Power Safety and Facility Guidelines Study of the Applied Physics Laboratory.« less

Model-Based Safety Analysis

NASA Technical Reports Server (NTRS)

Joshi, Anjali; Heimdahl, Mats P. E.; Miller, Steven P.; Whalen, Mike W.

2006-01-01

System safety analysis techniques are well established and are used extensively during the design of safety-critical systems. Despite this, most of the techniques are highly subjective and dependent on the skill of the practitioner. Since these analyses are usually based on an informal system model, it is unlikely that they will be complete, consistent, and error free. In fact, the lack of precise models of the system architecture and its failure modes often forces the safety analysts to devote much of their effort to gathering architectural details about the system behavior from several sources and embedding this information in the safety artifacts such as the fault trees. This report describes Model-Based Safety Analysis, an approach in which the system and safety engineers share a common system model created using a model-based development process. By extending the system model with a fault model as well as relevant portions of the physical system to be controlled, automated support can be provided for much of the safety analysis. We believe that by using a common model for both system and safety engineering and automating parts of the safety analysis, we can both reduce the cost and improve the quality of the safety analysis. Here we present our vision of model-based safety analysis and discuss the advantages and challenges in making this approach practical.

Advanced Range Safety System for High Energy Vehicles

NASA Technical Reports Server (NTRS)

Claxton, Jeffrey S.; Linton, Donald F.

2002-01-01

The advanced range safety system project is a collaboration between the National Aeronautics and Space Administration and the United States Air Force to develop systems that would reduce costs and schedule for safety approval for new classes of unmanned high-energy vehicles. The mission-planning feature for this system would yield flight profiles that satisfy the mission requirements for the user while providing an increased quality of risk assessment, enhancing public safety. By improving the speed and accuracy of predicting risks to the public, mission planners would be able to expand flight envelopes significantly. Once in place, this system is expected to offer the flexibility of handling real-time risk management for the high-energy capabilities of hypersonic vehicles including autonomous return-from-orbit vehicles and extended flight profiles over land. Users of this system would include mission planners of Space Launch Initiative vehicles, space planes, and other high-energy vehicles. The real-time features of the system could make extended flight of a malfunctioning vehicle possible, in lieu of an immediate terminate decision. With this improved capability, the user would have more time for anomaly resolution and potential recovery of a malfunctioning vehicle.

75 FR 45591 - Pipeline Safety: Notice of Technical Pipeline Safety Advisory Committee Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-03

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part... Committee Meetings AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA); DOT. ACTION... safety standards, risk assessments, and safety policies for natural gas pipelines and for hazardous...

Nuclear Safety

DOE Office of Scientific and Technical Information (OSTI.GOV)

Silver, E G

This document is a review journal that covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated.

Software safety

NASA Technical Reports Server (NTRS)

Leveson, Nancy

1987-01-01

Software safety and its relationship to other qualities are discussed. It is shown that standard reliability and fault tolerance techniques will not solve the safety problem for the present. A new attitude requires: looking at what you do NOT want software to do along with what you want it to do; and assuming things will go wrong. New procedures and changes to entire software development process are necessary: special software safety analysis techniques are needed; and design techniques, especially eliminating complexity, can be very helpful.

Aerospace Safety Advisory Panel

NASA Technical Reports Server (NTRS)

2001-01-01

This annual report is based on the activities of the Aerospace Safety Advisory Panel in calendar year 2000. During this year, the construction of the International Space Station (ISS) moved into high gear. The launch of the Russian Service Module was followed by three Space Shuttle construction and logistics flights and the deployment of the Expedition One crew. Continuous habitation of the ISS has begun. To date, both the ISS and Space Shuttle programs have met or exceeded most of their flight objectives. In spite of the intensity of these efforts, it is clear that safety was always placed ahead of cost and schedule. This safety consciousness permitted the Panel to devote more of its efforts to examining the long-term picture. With ISS construction accelerating, demands on the Space Shuttle will increase. While Russian Soyuz and Progress spacecraft will make some flights, the Space Shuttle remains the primary vehicle to sustain the ISS and all other U.S. activities that require humans in space. Development of a next generation, human-rated vehicle has slowed due to a variety of technological problems and the absence of an approach that can accomplish the task significantly better than the Space Shuttle. Moreover, even if a viable design were currently available, the realities of funding and development cycles suggest that it would take many years to bring it to fruition. Thus, it is inescapable that for the foreseeable future the Space Shuttle will be the only human-rated vehicle available to the U.S. space program for support of the ISS and other missions requiring humans. Use of the Space Shuttle will extend well beyond current planning, and is likely to continue for the life of the ISS.

Protection and Safety.

ERIC Educational Resources Information Center

American School Board Journal, 1964

1964-01-01

Several aspects of school safety and protection are presented for school administrators and architects. Among those topics discussed are--(1) life safety, (2) vandalism controlled through proper design, (3) personal protective devices, and (4) fire alarm systems. Another critical factor in providing a complete school safety program is proper…

Water Safety

MedlinePlus

... Staying Safe Videos for Educators Search English Español Water Safety KidsHealth / For Parents / Water Safety What's in ... remains your best measure of protection. Making Kids Water Wise It's important to teach your kids proper ...

Water Safety

MedlinePlus

... Staying Safe Videos for Educators Search English Español Water Safety KidsHealth / For Teens / Water Safety What's in ... drownings are tied to alcohol use. At the Water Park OK, so you do more splashing than ...

Safety and the Human Factor.

ERIC Educational Resources Information Center

Smith, Ann

1982-01-01

Discusses four elements of safety programs: (1) safety training; (2) safety inspections; (3) accident investigations; and (4) protective safety equipment. Also discusses safety considerations in water/wastewater treatment facilities focusing on falls, drowning hazards, trickling filters, confined space entry, collection/distribution system safety,…

The Impact of Transformational Leadership on Safety Climate and Individual Safety Behavior on Construction Sites.

PubMed

Shen, Yuzhong; Ju, Chuanjing; Koh, Tas Yong; Rowlinson, Steve; Bridge, Adrian J

2017-01-05

Unsafe acts contribute dominantly to construction accidents, and increasing safety behavior is essential to reduce accidents. Previous research conceptualized safety behavior as an interaction between proximal individual differences (safety knowledge and safety motivation) and distal contextual factors (leadership and safety climate). However, relatively little empirical research has examined this conceptualization in the construction sector. Given the cultural background of the sample, this study makes a slight modification to the conceptualization and views transformational leadership as an antecedent of safety climate. Accordingly, this study establishes a multiple mediator model showing the mechanisms through which transformational leadership translates into safety behavior. The multiple mediator model is estimated by the structural equation modeling (SEM) technique, using individual questionnaire responses from a random sample of construction personnel based in Hong Kong. As hypothesized, transformational leadership has a significant impact on safety climate which is mediated by safety-specific leader-member exchange (LMX), and safety climate in turn impacts safety behavior through safety knowledge. The results suggest that future safety climate interventions should be more effective if supervisors exhibit transformational leadership, encourage construction personnel to voice safety concerns without fear of retaliation, and repeatedly remind them about safety on the job.

The Impact of Transformational Leadership on Safety Climate and Individual Safety Behavior on Construction Sites

PubMed Central

Shen, Yuzhong; Ju, Chuanjing; Koh, Tas Yong; Rowlinson, Steve; Bridge, Adrian J.

2017-01-01

Unsafe acts contribute dominantly to construction accidents, and increasing safety behavior is essential to reduce accidents. Previous research conceptualized safety behavior as an interaction between proximal individual differences (safety knowledge and safety motivation) and distal contextual factors (leadership and safety climate). However, relatively little empirical research has examined this conceptualization in the construction sector. Given the cultural background of the sample, this study makes a slight modification to the conceptualization and views transformational leadership as an antecedent of safety climate. Accordingly, this study establishes a multiple mediator model showing the mechanisms through which transformational leadership translates into safety behavior. The multiple mediator model is estimated by the structural equation modeling (SEM) technique, using individual questionnaire responses from a random sample of construction personnel based in Hong Kong. As hypothesized, transformational leadership has a significant impact on safety climate which is mediated by safety-specific leader–member exchange (LMX), and safety climate in turn impacts safety behavior through safety knowledge. The results suggest that future safety climate interventions should be more effective if supervisors exhibit transformational leadership, encourage construction personnel to voice safety concerns without fear of retaliation, and repeatedly remind them about safety on the job. PMID:28067775

The Parable of the Boiled System Safety Professional: Drift to Failure

NASA Technical Reports Server (NTRS)

Shivers, C. Herbert

2011-01-01

Recall from the Parable of the Boiled Frog, that tossing a frog into boiling water causes the frog to jump out and hop away while placing a frog in suitable temperature water and slowly bringing the water to a boil results in the frog boiling due to not being aware of the slowly increasing danger, theoretically, of course. System safety professionals must guard against allowing dangers to creep unnoticed into their projects and be ever alert to notice signs of impending problems. People have used various phrases related to the idea, most notably, latent conditions, James Reason in Managing the Risks of Organizational Accidents (1, pp 10-11), Drift to Failure, Sydney Dekker (2, pp 82-86) in Resilience Engineering: Chronicling the Emergence of Confused Consensus in Resilience Engineering: Concepts and Precepts, Hollnagel, Woods and Leveson, and normalization of deviance, Diane Vaughan in The Challenger Launch Decision: Risky Technology, Culture, and Deviance at NASA (3). Reason also said, If eternal vigilance is the price of liberty, then chronic unease is the price of safety (1, p 37). Our challenge as system safety professionals is to be aware of the emergence of signals that warn us of slowly eroding safety margins. This paper will discuss how system safety professionals might better perform in that regard.

Principles of Safety Pharmacology

PubMed Central

Pugsley, M K; Authier, S; Curtis, M J

2008-01-01

Safety Pharmacology is a rapidly developing discipline that uses the basic principles of pharmacology in a regulatory-driven process to generate data to inform risk/benefit assessment. The aim of Safety Pharmacology is to characterize the pharmacodynamic/pharmacokinetic (PK/PD) relationship of a drug's adverse effects using continuously evolving methodology. Unlike toxicology, Safety Pharmacology includes within its remit a regulatory requirement to predict the risk of rare lethal events. This gives Safety Pharmacology its unique character. The key issues for Safety Pharmacology are detection of an adverse effect liability, projection of the data into safety margin calculation and finally clinical safety monitoring. This article sets out to explain the drivers for Safety Pharmacology so that the wider pharmacology community is better placed to understand the discipline. It concludes with a summary of principles that may help inform future resolution of unmet needs (especially establishing model validation for accurate risk assessment). Subsequent articles in this issue of the journal address specific aspects of Safety Pharmacology to explore the issues of model choice, the burden of proof and to highlight areas of intensive activity (such as testing for drug-induced rare event liability, and the challenge of testing the safety of so-called biologics (antibodies, gene therapy and so on.). PMID:18604233

Safety Behaviors and Stuttering.

PubMed

Lowe, Robyn; Helgadottir, Fjola; Menzies, Ross; Heard, Rob; O'Brian, Sue; Packman, Ann; Onslow, Mark

2017-05-24

Those who are socially anxious may use safety behaviors during feared social interactions to prevent negative outcomes. Safety behaviors are associated with anxiety maintenance and poorer treatment outcomes because they prevent fear extinction. Social anxiety disorder is often comorbid with stuttering. Speech pathologists reported in a recent publication (Helgadottir, Menzies, Onslow, Packman, & O'Brian, 2014a) that they often recommended procedures for clients that could be safety behaviors. This study investigated the self-reported use of safety behaviors by adults who stutter. Participants were 133 adults who stutter enrolled in an online cognitive-behavior therapy program. Participants completed a questionnaire about their use of potential safety behaviors when anxious during social encounters. Correlations were computed between safety behaviors and pretreatment scores on measures of fear of negative evaluation and negative cognitions. Of 133 participants, 132 reported that they used safety behaviors. Many of the safety behaviors correlated with higher scores for fear of negative evaluation and negative cognitions. Adults who stutter report using safety behaviors, and their use is associated with pretreatment fear of negative evaluation and unhelpful thoughts about stuttering. These results suggest that the negative effects of safety behaviors may extend to those who stutter, and further research is needed.

Promoting a Culture of Safety as a Patient Safety Strategy

PubMed Central

Weaver, Sallie J.; Lubomksi, Lisa H.; Wilson, Renee F.; Pfoh, Elizabeth R.; Martinez, Kathryn A.; Dy, Sydney M.

2015-01-01

Developing a culture of safety is a core element of many efforts to improve patient safety and care quality. This systematic review identifies and assesses interventions used to promote safety culture or climate in acute care settings. The authors searched MEDLINE, CINAHL, PsycINFO, Cochrane, and EMBASE to identify relevant English-language studies published from January 2000 to October 2012. They selected studies that targeted health care workers practicing in inpatient settings and included data about change in patient safety culture or climate after a targeted intervention. Two raters independently screened 3679 abstracts (which yielded 33 eligible studies in 35 articles), extracted study data, and rated study quality and strength of evidence. Eight studies included executive walk rounds or interdisciplinary rounds; 8 evaluated multicomponent, unit-based interventions; and 20 included team training or communication initiatives. Twenty-nine studies reported some improvement in safety culture or patient outcomes, but measured outcomes were highly heterogeneous. Strength of evidence was low, and most studies were pre–post evaluations of low to moderate quality. Within these limits, evidence suggests that interventions can improve perceptions of safety culture and potentially reduce patient harm. PMID:23460092

A Safety Program that Integrated Behavior-Based Safety and Traditional Safety Methods and Its Effects on Injury Rates of Manufacturing Workers

ERIC Educational Resources Information Center

Hermann, Jaime A.; Ibarra, Guillermo V.; Hopkins, B. L.

2010-01-01

The present research examines the effects of a complex safety program that combined Behavior-Based Safety (BBS) and traditional safety methods. The study was conducted in an automobile parts plant in Mexico. Two sister plants served as comparison. Some of the components of the safety programs addressed behaviors of managers and included methods…

Safety Education and Science.

ERIC Educational Resources Information Center

Ralph, Richard

1980-01-01

Safety education in the science classroom is discussed, including the beginning of safe management, attitudes toward safety education, laboratory assistants, chemical and health regulation, safety aids, and a case study of a high school science laboratory. Suggestions for safety codes for science teachers, student behavior, and laboratory…

Fire Safety - Multiple Languages

MedlinePlus

... Arabic (العربية) Expand Section Fire Safety at Home - English PDF Fire Safety at Home - العربية (Arabic) PDF ... Bosnian (bosanski) Expand Section Fire Safety at Home - English PDF Fire Safety at Home - bosanski (Bosnian) PDF ...

Nuclear space power safety and facility guidelines study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mehlman, W.F.

1995-09-11

This report addresses safety guidelines for space nuclear reactor power missions and was prepared by The Johns Hopkins University Applied Physics Laboratory (JHU/APL) under a Department of Energy grant, DE-FG01-94NE32180 dated 27 September 1994. This grant was based on a proposal submitted by the JHU/APL in response to an {open_quotes}Invitation for Proposals Designed to Support Federal Agencies and Commercial Interests in Meeting Special Power and Propulsion Needs for Future Space Missions{close_quotes}. The United States has not launched a nuclear reactor since SNAP 10A in April 1965 although many Radioisotope Thermoelectric Generators (RTGs) have been launched. An RTG powered system ismore » planned for launch as part of the Cassini mission to Saturn in 1997. Recently the Ballistic Missile Defense Office (BMDO) sponsored the Nuclear Electric Propulsion Space Test Program (NEPSTP) which was to demonstrate and evaluate the Russian-built TOPAZ II nuclear reactor as a power source in space. As of late 1993 the flight portion of this program was canceled but work to investigate the attributes of the reactor were continued but at a reduced level. While the future of space nuclear power systems is uncertain there are potential space missions which would require space nuclear power systems. The differences between space nuclear power systems and RTG devices are sufficient that safety and facility requirements warrant a review in the context of the unique features of a space nuclear reactor power system.« less

Ares I-X Range Safety Simulation Verification and Analysis Independent Validation and Verification

NASA Technical Reports Server (NTRS)

Merry, Carl M.; Tarpley, Ashley F.; Craig, A. Scott; Tartabini, Paul V.; Brewer, Joan D.; Davis, Jerel G.; Dulski, Matthew B.; Gimenez, Adrian; Barron, M. Kyle

2011-01-01

NASA s Ares I-X vehicle launched on a suborbital test flight from the Eastern Range in Florida on October 28, 2009. To obtain approval for launch, a range safety final flight data package was generated to meet the data requirements defined in the Air Force Space Command Manual 91-710 Volume 2. The delivery included products such as a nominal trajectory, trajectory envelopes, stage disposal data and footprints, and a malfunction turn analysis. The Air Force s 45th Space Wing uses these products to ensure public and launch area safety. Due to the criticality of these data, an independent validation and verification effort was undertaken to ensure data quality and adherence to requirements. As a result, the product package was delivered with the confidence that independent organizations using separate simulation software generated data to meet the range requirements and yielded consistent results. This document captures Ares I-X final flight data package verification and validation analysis, including the methodology used to validate and verify simulation inputs, execution, and results and presents lessons learned during the process

Safety Assessment of Multi Purpose Small Payload Rack(MSPR)

NASA Astrophysics Data System (ADS)

Mizutani, Yoshinobu; Takada, Satomi; Murata, Kosei; Ozawa, Daisaku; Kobayashi, Ryoji; Nakamura, Yasuhiro

2010-09-01

We are reporting summary of preliminary safety assessment for Multi Purpose Small Payload Rack(MSPR), which is one of the micro gravity experiment facilities that are being developed for the 2nd phase JEM utilization(JEM: Japanese Experiment Module) that will be launched on H-II Transfer Vehicle(HTV) 2nd flight in 2011. MSPR is used for multi-purpose micro-g experiment providing experimental spaces and work stations. MSPR has three experimental spaces; first, there is a space called Work Volume(WV) with capacity volume of approximately 350 litters, in which multiple resources including electricity, communication, and moving image functions can be used. Within this space, installation of devices can be done by simple, prompt attachment by Velcro and pins with high degree of flexibility. Second, there is Small Experiment Area(SEA), with capacity volume of approximately 70 litters, in which electricity, communication, and moving image functions can also be used in the same way as WV. These spaces protect experiment devices and specimens from contingent loads by the crewmembers. Third, there is Work Bench with area of 0.5 square meters, on which can be used for maintenance, inspection and data operations of installed devices, etc. This bench can be stored in the rack during contingency. Chamber for Combustion Experiment(CCE) that is planned to be installed in WV is a pressure-resistant experimental container that can be used to seal hazardous materials from combustion experiments. This CCE has double sealing design in chamber itself, which resist gas leakage under normal the temperature and pressure. Electricity, communication, moving image function can be used in the same way as WV. JAXA Phase 2 Safety Review Panel(SRP) has been held in April, 2010. For safety analysis of MSPR, hazards were identified based on Fault Tree Analysis methodology and then these hazards were classified into either eight ISS standard-type hazards or eight unique-type hazards that requires

Report by the Aerospace Safety Advisory Panel

NASA Technical Reports Server (NTRS)

1981-01-01

The process of preparation for the first two shuttle flights was observed and information from both flights was gathered in order to confirm the concept and performance of the major elements of the space transportation system. To achieve truly operational operating safety, regularity, and minimum practical cost, the organization of efforts between the R&D community and any transportation service organization should be clearly separated with the latter organization assuming responsibilities for marketing its services; planning and acquiring prime hardware and spares; maintainance; certification of procedures; training; and creation of requirements for future development. A technical audit of the application of redundancy concepts to shuttle systems is suggested. The state of the art of space transportation hardware suggests that a number of concept changes may improve reliability, costs, and operational safety. For the remaining R&D flights, it is suggested that a redline audit be made of limits that should not be exceeded for ready to launch.

Integrated deterministic and probabilistic safety analysis for safety assessment of nuclear power plants

DOE PAGES

Di Maio, Francesco; Zio, Enrico; Smith, Curtis; ...

2015-07-06

The present special issue contains an overview of the research in the field of Integrated Deterministic and Probabilistic Safety Assessment (IDPSA) of Nuclear Power Plants (NPPs). Traditionally, safety regulation for NPPs design and operation has been based on Deterministic Safety Assessment (DSA) methods to verify criteria that assure plant safety in a number of postulated Design Basis Accident (DBA) scenarios. Referring to such criteria, it is also possible to identify those plant Structures, Systems, and Components (SSCs) and activities that are most important for safety within those postulated scenarios. Then, the design, operation, and maintenance of these “safety-related” SSCs andmore » activities are controlled through regulatory requirements and supported by Probabilistic Safety Assessment (PSA).« less

Patient safety goals for the proposed Federal Health Information Technology Safety Center.

PubMed

Sittig, Dean F; Classen, David C; Singh, Hardeep

2015-03-01

The Office of the National Coordinator for Health Information Technology is expected to oversee creation of a Health Information Technology (HIT) Safety Center. While its functions are still being defined, the center is envisioned as a public-private entity focusing on promotion of HIT related patient safety. We propose that the HIT Safety Center leverages its unique position to work with key administrative and policy stakeholders, healthcare organizations (HCOs), and HIT vendors to achieve four goals: (1) facilitate creation of a nationwide 'post-marketing' surveillance system to monitor HIT related safety events; (2) develop methods and governance structures to support investigation of major HIT related safety events; (3) create the infrastructure and methods needed to carry out random assessments of HIT related safety in complex HCOs; and (4) advocate for HIT safety with government and private entities. The convening ability of a federally supported HIT Safety Center could be critically important to our transformation to a safe and effective HIT enabled healthcare system. © The Author 2014. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

School Bus Safety.

ERIC Educational Resources Information Center

Stroup, Karen Bruner; And Others

1991-01-01

Equipment to allow safe transportation of disabled children is reviewed. Such equipment includes infant car seats, child safety seats, safety vests, and accommodations for children in casts and/or braces. Five principles for evaluation and selection of safe seating options are given as are safety rules and information on standards and resources.…

14 CFR 1274.934 - Safety.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 5 2011-01-01 2010-01-01 true Safety. 1274.934 Section 1274.934... FIRMS Other Provisions and Special Conditions § 1274.934 Safety. Safety July 2002 NASA's safety priority... shall act responsibly in matters of safety and shall take all reasonable safety measures in performing...

14 CFR 1274.934 - Safety.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Safety. 1274.934 Section 1274.934... FIRMS Other Provisions and Special Conditions § 1274.934 Safety. Safety July 2002 NASA's safety priority... shall act responsibly in matters of safety and shall take all reasonable safety measures in performing...

Arizona Traffic Safety Education, K-8. Pedestrian Safety, Grades K-1.

ERIC Educational Resources Information Center

Mesa Public Schools, AZ.

One in a series designed to assist Arizona elementary and junior high school teachers in developing children's traffic safety skills, this curriculum guide contains thirteen lessons on pedestrian safety for use in kindergarten and grade 1. Introductory information provided for the teacher includes basic highway safety concepts, stressing…

76 FR 79192 - Patient Safety Organizations: Voluntary Relinquishment From HSMS Patient Safety Organization

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-21

... HSMS Patient Safety Organization was delisted effective at 12:00 Midnight ET (2400) on December 6, 2011... Organizations: Voluntary Relinquishment From HSMS Patient Safety Organization AGENCY: Agency for Healthcare... voluntary relinquishment from the HSMS Patient Safety Organization of its status as a Patient Safety...

Space engine safety system

NASA Technical Reports Server (NTRS)

Maul, William A.; Meyer, Claudia M.

1991-01-01

A rocket engine safety system was designed to initiate control procedures to minimize damage to the engine or vehicle or test stand in the event of an engine failure. The features and the implementation issues associated with rocket engine safety systems are discussed, as well as the specific concerns of safety systems applied to a space-based engine and long duration space missions. Examples of safety system features and architectures are given, based on recent safety monitoring investigations conducted for the Space Shuttle Main Engine and for future liquid rocket engines. Also, the general design and implementation process for rocket engine safety systems is presented.

Better Science Through Safety.

ERIC Educational Resources Information Center

Gerlovich, Jack A.; Downs, Gary E.

Following a brief description of the major components found effective in school safety programs (safety management, education, and services) and data on school accidents in Iowa, this book addresses various aspects of safety related to science instruction, emphasizing that responsibility for safety must be shared by both teacher and students.…

Virtual Safety Training.

ERIC Educational Resources Information Center

Fuller, Scott; Davis, Jason

2003-01-01

The Multimedia Tool Box Talk is a web-based quick reference safety guide and training tool for construction personnel. An intended outcome of this effort was to provide an efficient and effective way to locate and interpret crucial safety information while at the job site. The tool includes information from the Occupational Safety and Health…

Safety in Outdoor Adventure Programs. S.O.A.P. Safety Policy.

ERIC Educational Resources Information Center

MacDonald, Wayne, Comp.; And Others

Drafted in 1978 as a working document for Safety in Outdoor Adventure Programs (S.O.A.P.) by a council of outdoor adventure programmers, checklists outline standard accepted safety policy for Outdoor Adventure Programs and Wilderness Adventure Programs conducted through public or private agencies in California. Safety policy emphasizes: the…

Magnetic Resonance Safety

PubMed Central

Sammet, Steffen

2016-01-01

Magnetic Resonance Imaging (MRI) has a superior soft-tissue contrast compared to other radiological imaging modalities and its physiological and functional applications have led to a significant increase in MRI scans worldwide. A comprehensive MRI safety training to protect patients and other healthcare workers from potential bio-effects and risks of the magnetic fields in an MRI suite is therefore essential. The knowledge of the purpose of safety zones in an MRI suite as well as MRI appropriateness criteria is important for all healthcare professionals who will work in the MRI environment or refer patients for MRI scans. The purpose of this article is to give an overview of current magnetic resonance safety guidelines and discuss the safety risks of magnetic fields in an MRI suite including forces and torque of ferromagnetic objects, tissue heating, peripheral nerve stimulation and hearing damages. MRI safety and compatibility of implanted devices, MRI scans during pregnancy and the potential risks of MRI contrast agents will also be discussed and a comprehensive MRI safety training to avoid fatal accidents in an MRI suite will be presented. PMID:26940331

Overview of Energy Systems` safety analysis report programs. Safety Analysis Report Update Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-03-01

The primary purpose of an Safety Analysis Report (SAR) is to provide a basis for judging the adequacy of a facility`s safety. The SAR documents the safety analyses that systematically identify the hazards posed by the facility, analyze the consequences and risk of potential accidents, and describe hazard control measures that protect the health and safety of the public and employees. In addition, some SARs document, as Technical Safety Requirements (TSRs, which include Technical Specifications and Operational Safety Requirements), technical and administrative requirements that ensure the facility is operated within prescribed safety limits. SARs also provide conveniently summarized information thatmore » may be used to support procedure development, training, inspections, and other activities necessary to facility operation. This ``Overview of Energy Systems Safety Analysis Report Programs`` Provides an introduction to the programs and processes used in the development and maintenance of the SARs. It also summarizes some of the uses of the SARs within Energy Systems and DOE.« less

Moving forward with safety culture.

PubMed

Weber, Michael

2012-04-01

Radiation safety and protection of people are shared goals of the Health Physics Society (HPS) and the U.S. Nuclear Regulatory Commission (NRC). A positive safety culture contributes to achieving radiation safety and protection of people, which are important to both the HPS and the NRC. Through unprecedented collaboration and engagement with diverse stakeholders, the NRC and the stakeholders developed a Safety Culture Policy Statement. The policy statement defines safety culture and describes the traits of a positive safety culture. Consideration of both safety and security issues and the interface of safety and security are underlying principles that support the policy. Examination of significant events, both within the nuclear industry and in society at large, illustrates how weaknesses in these traits can contribute to the occurrence and consequences of safety incidents, including serious injury and loss of life. With the policy statement in place, the NRC is moving forward with outreach and education about safety culture. Health physicists and other radiation safety specialists play an essential role in enhancing safety culture.

Nuclear Powerplant Safety: Operations.

ERIC Educational Resources Information Center

Department of Energy, Washington, DC. Nuclear Energy Office.

Powerplant systems and procedures that ensure the day-to-day health and safety of people in and around the plant is referred to as operational safety. This safety is the result of careful planning, good engineering and design, strict licensing and regulation, and environmental monitoring. Procedures that assure operational safety at nuclear…

Leadership for safety: industrial experience.

PubMed

Flin, R; Yule, S

2004-12-01

The importance of leadership for effective safety management has been the focus of research attention in industry for a number of years, especially in energy and manufacturing sectors. In contrast, very little research into leadership and safety has been carried out in medical settings. A selective review of the industrial safety literature for leadership research with possible application in health care was undertaken. Emerging findings show the importance of participative, transformational styles for safety performance at all levels of management. Transactional styles with attention to monitoring and reinforcement of workers' safety behaviours have been shown to be effective at the supervisory level. Middle managers need to be involved in safety and foster open communication, while ensuring compliance with safety systems. They should allow supervisors a degree of autonomy for safety initiatives. Senior managers have a prime influence on the organisation's safety culture. They need to continuously demonstrate a visible commitment to safety, best indicated by the time they devote to safety matters.

Leadership for safety: industrial experience

PubMed Central

Flin, R; Yule, S

2004-01-01

The importance of leadership for effective safety management has been the focus of research attention in industry for a number of years, especially in energy and manufacturing sectors. In contrast, very little research into leadership and safety has been carried out in medical settings. A selective review of the industrial safety literature for leadership research with possible application in health care was undertaken. Emerging findings show the importance of participative, transformational styles for safety performance at all levels of management. Transactional styles with attention to monitoring and reinforcement of workers' safety behaviours have been shown to be effective at the supervisory level. Middle managers need to be involved in safety and foster open communication, while ensuring compliance with safety systems. They should allow supervisors a degree of autonomy for safety initiatives. Senior managers have a prime influence on the organisation's safety culture. They need to continuously demonstrate a visible commitment to safety, best indicated by the time they devote to safety matters. PMID:15576692

NASA System Safety Handbook. Volume 2: System Safety Concepts, Guidelines, and Implementation Examples

NASA Technical Reports Server (NTRS)

Dezfuli, Homayoon; Benjamin, Allan; Everett, Christopher; Feather, Martin; Rutledge, Peter; Sen, Dev; Youngblood, Robert

2015-01-01

This is the second of two volumes that collectively comprise the NASA System Safety Handbook. Volume 1 (NASASP-210-580) was prepared for the purpose of presenting the overall framework for System Safety and for providing the general concepts needed to implement the framework. Volume 2 provides guidance for implementing these concepts as an integral part of systems engineering and risk management. This guidance addresses the following functional areas: 1.The development of objectives that collectively define adequate safety for a system, and the safety requirements derived from these objectives that are levied on the system. 2.The conduct of system safety activities, performed to meet the safety requirements, with specific emphasis on the conduct of integrated safety analysis (ISA) as a fundamental means by which systems engineering and risk management decisions are risk-informed. 3.The development of a risk-informed safety case (RISC) at major milestone reviews to argue that the systems safety objectives are satisfied (and therefore that the system is adequately safe). 4.The evaluation of the RISC (including supporting evidence) using a defined set of evaluation criteria, to assess the veracity of the claims made therein in order to support risk acceptance decisions.

Ares-I-X Vehicle Preliminary Range Safety Malfunction Turn Analysis

NASA Technical Reports Server (NTRS)

Beaty, James R.; Starr, Brett R.; Gowan, John W., Jr.

2008-01-01

Ares-I-X is the designation given to the flight test version of the Ares-I rocket (also known as the Crew Launch Vehicle - CLV) being developed by NASA. As part of the preliminary flight plan approval process for the test vehicle, a range safety malfunction turn analysis was performed to support the launch area risk assessment and vehicle destruct criteria development processes. Several vehicle failure scenarios were identified which could cause the vehicle trajectory to deviate from its normal flight path, and the effects of these failures were evaluated with an Ares-I-X 6 degrees-of-freedom (6-DOF) digital simulation, using the Program to Optimize Simulated Trajectories Version 2 (POST2) simulation framework. The Ares-I-X simulation analysis provides output files containing vehicle state information, which are used by other risk assessment and vehicle debris trajectory simulation tools to determine the risk to personnel and facilities in the vicinity of the launch area at Kennedy Space Center (KSC), and to develop the vehicle destruct criteria used by the flight test range safety officer. The simulation analysis approach used for this study is described, including descriptions of the failure modes which were considered and the underlying assumptions and ground rules of the study, and preliminary results are presented, determined by analysis of the trajectory deviation of the failure cases, compared with the expected vehicle trajectory.

Applications of Advanced Nondestructive Measurement Techniques to Address Safety of Flight Issues on NASA Spacecraft

NASA Technical Reports Server (NTRS)

Prosser, Bill

2016-01-01

Advanced nondestructive measurement techniques are critical for ensuring the reliability and safety of NASA spacecraft. Techniques such as infrared thermography, THz imaging, X-ray computed tomography and backscatter X-ray are used to detect indications of damage in spacecraft components and structures. Additionally, sensor and measurement systems are integrated into spacecraft to provide structural health monitoring to detect damaging events that occur during flight such as debris impacts during launch and assent or from micrometeoroid and orbital debris, or excessive loading due to anomalous flight conditions. A number of examples will be provided of how these nondestructive measurement techniques have been applied to resolve safety critical inspection concerns for the Space Shuttle, International Space Station (ISS), and a variety of launch vehicles and unmanned spacecraft.

Relationships between psychological safety climate facets and safety behavior in the rail industry: a dominance analysis.

PubMed

Morrow, Stephanie L; McGonagle, Alyssa K; Dove-Steinkamp, Megan L; Walker, Curtis T; Marmet, Matthew; Barnes-Farrell, Janet L

2010-09-01

The goals of this study were twofold: (1) to confirm a relationship between employee perceptions of psychological safety climate and safety behavior for a sample of workers in the rail industry and (2) to explore the relative strengths of relationships between specific facets of safety climate and safety behavior. Non-management rail maintenance workers employed by a large North American railroad completed a survey (n=421) regarding workplace safety perceptions and behaviors. Three facets of safety climate (management safety, coworker safety, and work-safety tension) were assessed as relating to individual workers' reported safety behavior. All three facets were significantly associated with safety behavior. Dominance analysis was used to assess the relative importance of each facet as related to the outcome, and work-safety tension evidenced the strongest relationship with safety behavior. Published by Elsevier Ltd.

Safety management vs. picking leaves.

PubMed

Wright, D

1991-09-01

A safety program will generally have as its base a comprehensive written document made available for everyone in the organization. The document should indicate a positive commitment to safety by management. It should not be a "how to" guide, but rather a broad outline to establish responsibilities, goals, and methods. The safety manager is appointed in writing and answers to the highest level of management. As opposed to a "doer," the safety manager acts as a director and administrator of the safety program. This is accomplished through the advisory capacity of the safety program for solicited and unsolicited problems. The focus of the safety manager is on the system and how it contributes to safety problems, rather than individual problems. Management has the ultimate responsibility for safety. Their efforts should reflect a proactive attitude to correct problems in the system. In order to identify areas of interest, technically competent input from the safety manager should be required. The support of the safety program by top management determines the success of the program. Without a clear and firm commitment by the organization, safety will receive no more than lip service from the employees. The benefits of a proactive approach will be realized in the organization's ability to manage safety issues, rather than reacting to them.

78 FR 49121 - Safety Zone; Luna Pier Fireworks, Luna Pier, MI

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-13

... Zone; Luna Pier Fireworks, Luna Pier, MI AGENCY: Coast Guard, DHS. ACTION: Notice of enforcement of regulation. SUMMARY: The Coast Guard will enforce the safety zone for the Luna Pier Fireworks Show, Luna Pier... the fireworks launch site at the Clyde E. Evens Municipal Pier, located at position 41[deg]48'32'' N...

Safety first: Instrumentality for reaching safety determines attention allocation under threat.

PubMed

Vogt, Julia; Koster, Ernst H W; De Houwer, Jan

2017-04-01

Theories of attention to emotional information suggest that attentional processes prioritize threatening information. In this article, we suggest that attention will prioritize the events that are most instrumental to a goal in any given context, which in threatening situations is typically reaching safety. To test our hypotheses, we used an attentional cueing paradigm that contained cues signaling imminent threat (i.e., aversive noises) as well as cues that allowed participants to avoid threat (instrumental safety signals). Correct reactions to instrumental safety signals seemingly allowed participants to lower the presentation rate of the threat. Experiment 1 demonstrates that attention prioritizes instrumental safety signals over threat signals. Experiment 2 replicates this finding and additionally compares instrumental safety signals to other action-relevant signals controlling for action relevance as cause of the effects. Experiment 3 demonstrates that when actions toward threat signals permit to avoid threat, attention prioritizes threat signals. Taken together, these results support the view that instrumentality for reaching safety determines the allocation of attention under threat. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Expert panel answers questions for Super Safety and Health Day at KSC.

NASA Technical Reports Server (NTRS)

1999-01-01

A panel of NASA and contractor senior staff, plus officers from the 45th Space Wing, discuss safety- and health-related concerns in front of an audience of KSC employees, as part of Super Safety and Health Day. Moderating at the podium is Loren Shriver, deputy director for Launch & Payload Processing. Seated left to right are Burt Summerfield, associate director of the Biomedical Office; Colonel William S. Swindling, commander, 45th Medical Group, Patrick Air Force Base, Fla.; Ron Dittemore, manager, Space Shuttle Programs, Johnson Space Center; Roy Bridges, Center Director; Col. Tom Deppe, vice commander, 45th Space Wing, Patrick Air Force Base; Jim Schoefield, program manager, Payload Ground Operations, Boeing; Bill Hickman, program manager, Space Gateway Support; and Ed Adamek, vice president and associate program manager for Ground Operations, United Space Alliance. The panel was one of the presentations during KSC's second annual day-long dedication to safety. Most normal work activities were suspended to allow personnel to attend related activities. The theme, 'Safety and Health Go Hand in Hand,' emphasized KSC's commitment to place the safety and health of the public, astronauts, employees and space-related resources first and foremost. Events also included a keynote address, vendor exhibits, and safety training in work groups. The keynote address and panel session were also broadcast internally over NASA television.

Why the Eurocontrol Safety Regulation Commission Policy on Safety Nets and Risk Assessment is Wrong

NASA Astrophysics Data System (ADS)

Brooker, Peter

2004-05-01

Current Eurocontrol Safety Regulation Commission (SRC) policy says that the Air Traffic Management (ATM) system (including safety minima) must be demonstrated through risk assessments to meet the Target Level of Safety (TLS) without needing to take safety nets (such as Short Term Conflict Alert) into account. This policy is wrong. The policy is invalid because it does not build rationally and consistently from ATM's firm foundations of TLS and hazard analysis. The policy is bad because it would tend to retard safety improvements. Safety net policy must rest on a clear and rational treatment of integrated ATM system safety defences. A new safety net policy, appropriate to safe ATM system improvements, is needed, which recognizes that safety nets are an integrated part of ATM system defences. The effects of safety nets in reducing deaths from mid-air collisions should be fully included in hazard analysis and safety audits in the context of the TLS for total system design.

77 FR 69927 - Safety Advisory Notice: Safety Advisory for Shippers and Carriers of Air Bags

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-21

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No... Air Bags AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION: Safety... Administrator for Hazardous Materials Safety, Pipeline and Hazardous Materials Safety Administration. [FR Doc...

The role of leader influence tactics and safety climate in engaging employees' safety participation.

PubMed

Clarke, Sharon; Ward, Katie

2006-10-01

This study examines the effect of leader influence tactics on employee safety participation in a U.K.-based manufacturing organization, examining the role of safety climate as a mediator. Structural equation modeling showed that leader influence tactics associated with a transformational leadership style had significant relationships with safety participation that were partially mediated by the safety climate (consultation) or fully mediated by the safety climate (inspirational appeals). In addition, leader influence tactics associated with a transactional leadership style had significant relationships with safety participation: rational persuasion (partially mediated by safety climate) and coalition tactics (direct effect). Thus, leaders may encourage safety participation using a combination of influence tactics, based on rational arguments, involvement in decision making, and generating enthusiasm for safety. The influence of building trust in managers is discussed as an underlying mechanism in this relationship. Practical implications are highlighted, including the design of leadership development programs, which may be particularly suited to high-reliability organizations.

Analysis of Safety-Related Regulatory Actions for New Drugs in Japan by Nature of Identified Risks.

PubMed

Fujikawa, Makoto; Ono, Shunsuke

2017-01-01

Mechanisms underlying safety events may be heterogeneous and depend on conditions of development and marketing, including the populations studied in clinical trials and the amount of data required for approval, especially under pathways for accelerated access. This study was conducted to investigate possible factors affecting the first post-marketing safety-related regulatory actions (SRRAs) after launch of new drugs in Japan. We studied 338 new molecular entities (NMEs) approved in Japan between 2004 and 2014. We focused on three different types of SRRAs: (1) all-SRRAs (i.e. SRRAs from domestic cases and other countries), (2) domestic-SRRAs (i.e. SRRAs from domestic cases) and (3) domestic unknown-SRRAs (i.e. SRRAs of unknown risks from domestic cases). Occurrences of the three types of SRRAs were analyzed using Kaplan-Meier analysis and Cox-regression. SRRAs tended to occur sooner for NMEs launched in recent years versus those launched towards the beginning of the study period. Risk of SRRA was high for antineoplastics. Drugs for cardiovascular diseases, central nervous system, and diabetes had positive associations with all-SRRAs, but the associations were weaker with domestic-SRRAs. Domestic-SRRAs were more likely for drugs with relatively novel modes of action (MOAs). Longer lag to Japanese launch after first global launch significantly lowered SRRA risks. While most of the variables showed similar associations across the three types of SRRAs, adoption of bridging strategies showed higher risks only for domestic-SRRAs, not for all-SRRAs. FDA safety labeling changes and non-orphan priority review drugs presented higher domestic-SRRA risks. The number of adverse drug reactions (ADRs) from spontaneous reports had positive correlations with the three types of SRRAs, whereas the number from company-led surveillance showed no association. Our results indicated that global clinical development pathways and marketing status should be considered more seriously in

Mechanized Off-Road Equipment Safety. Module SH-17. Safety and Health.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on mechanized off-road equipment safety is one of 50 modules concerned with job safety and health. This module aims to encourage the development of a positive approach to safety as it concerns the heavy equipment industry. Following the introduction, 15 objectives (each keyed to a page in the text) the student is expected to…

75 FR 63774 - Pipeline Safety: Safety of On-Shore Hazardous Liquid Pipelines

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-18

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part... Pipelines AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), Department of... Gas Pipeline Safety Act of 1968, Public Law 90-481, delegated to DOT the authority to develop...

Measuring and improving patient safety through health information technology: The Health IT Safety Framework

PubMed Central

Singh, Hardeep

2016-01-01

Health information technology (health IT) has potential to improve patient safety but its implementation and use has led to unintended consequences and new safety concerns. A key challenge to improving safety in health IT-enabled healthcare systems is to develop valid, feasible strategies to measure safety concerns at the intersection of health IT and patient safety. In response to the fundamental conceptual and methodological gaps related to both defining and measuring health IT-related patient safety, we propose a new framework, the Health IT Safety (HITS) measurement framework, to provide a conceptual foundation for health IT-related patient safety measurement, monitoring, and improvement. The HITS framework follows both Continuous Quality Improvement (CQI) and sociotechnical approaches and calls for new measures and measurement activities to address safety concerns in three related domains: 1) concerns that are unique and specific to technology (e.g., to address unsafe health IT related to unavailable or malfunctioning hardware or software); 2) concerns created by the failure to use health IT appropriately or by misuse of health IT (e.g. to reduce nuisance alerts in the electronic health record (EHR)), and 3) the use of health IT to monitor risks, health care processes and outcomes and identify potential safety concerns before they can harm patients (e.g. use EHR-based algorithms to identify patients at risk for medication errors or care delays). The framework proposes to integrate both retrospective and prospective measurement of HIT safety with an organization's existing clinical risk management and safety programs. It aims to facilitate organizational learning, comprehensive 360 degree assessment of HIT safety that includes vendor involvement, refinement of measurement tools and strategies, and shared responsibility to identify problems and implement solutions. A long term framework goal is to enable rigorous measurement that helps achieve the safety

49 CFR 385.317 - Will a safety audit result in a safety fitness determination by the FMCSA?

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 5 2010-10-01 2010-10-01 false Will a safety audit result in a safety fitness... SAFETY REGULATIONS SAFETY FITNESS PROCEDURES New Entrant Safety Assurance Program § 385.317 Will a safety audit result in a safety fitness determination by the FMCSA? A safety audit will not result in a safety...

49 CFR 385.317 - Will a safety audit result in a safety fitness determination by the FMCSA?

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 5 2011-10-01 2011-10-01 false Will a safety audit result in a safety fitness... SAFETY REGULATIONS SAFETY FITNESS PROCEDURES New Entrant Safety Assurance Program § 385.317 Will a safety audit result in a safety fitness determination by the FMCSA? A safety audit will not result in a safety...

49 CFR 385.317 - Will a safety audit result in a safety fitness determination by the FMCSA?

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 5 2013-10-01 2013-10-01 false Will a safety audit result in a safety fitness... SAFETY REGULATIONS SAFETY FITNESS PROCEDURES New Entrant Safety Assurance Program § 385.317 Will a safety audit result in a safety fitness determination by the FMCSA? A safety audit will not result in a safety...

49 CFR 385.317 - Will a safety audit result in a safety fitness determination by the FMCSA?

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 5 2012-10-01 2012-10-01 false Will a safety audit result in a safety fitness... SAFETY REGULATIONS SAFETY FITNESS PROCEDURES New Entrant Safety Assurance Program § 385.317 Will a safety audit result in a safety fitness determination by the FMCSA? A safety audit will not result in a safety...

49 CFR 385.317 - Will a safety audit result in a safety fitness determination by the FMCSA?

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 5 2014-10-01 2014-10-01 false Will a safety audit result in a safety fitness... SAFETY REGULATIONS SAFETY FITNESS PROCEDURES New Entrant Safety Assurance Program § 385.317 Will a safety audit result in a safety fitness determination by the FMCSA? A safety audit will not result in a safety...

Safety First

ERIC Educational Resources Information Center

Taft, Darryl

2011-01-01

Ned Miller does not take security lightly. As director of campus safety and emergency management at the Des Moines Area Community College (DMACC), any threat requires serious consideration. As community college administrators adopt a more proactive approach to campus safety, many institutions are experimenting with emerging technologies, including…

The Perception, Level of Safety Satisfaction and Safety Feedback on Occupational Safety and Health Management among Hospital Staff Nurses in Sabah State Health Department.

PubMed

Cheah, Whye Lian; Giloi, Nelbon; Chang, Ching Thon; Lim, Jac Fang

2012-07-01

This study aimed to determine the perception and level of safety satisfaction of staff nurses with regards to Occupational Safety and Health (OSH) management practice in the Sabah Health Department, and to associate the OSH management dimensions, to Safety Satisfaction and Safety Feedback. A cross-sectional study using a validated self-administered questionnaire was conducted among randomly respondents. 135 nurses responded the survey. Mean (SD) score for each dimension ranged from 1.70 ± 0.68-4.04 ± 0.65, with Training and Competence dimension (mean [SD], 4.04 ± 0.65) had the highest while Safety Incidence was the least score (mean [SD], 1.70 ± 0.68). Both mean (SD) scores for Safety Satisfaction and Safety Feedback was high, 3.28 ± 0.51 and 3.57 ± 0.73, respectively. Pearson's correlation analysis indicated that all OSH dimensions had significant correlation with Safety Satisfaction and Safety Feedback (r coefficient ranged from 0.176-0.512) except for Safety Incidence. The overall perception of OSH management was rather low. Significant correlation between Safety Satisfaction and Safety Feedback and several dimensions, suggest that each organization to put in place the leaders who have appropriate leadership and supervisory skills and committed in providing staff training to improve staff's competency in OSH practice. In addition, clear goals, rules, and reporting system will help the organization to implement proper OSH management practice.

78 FR 45057 - Safety Zone; Alpena Area HOG Rally Fireworks, Alpena, Michigan

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-26

...-AA00 Safety Zone; Alpena Area HOG Rally Fireworks, Alpena, Michigan AGENCY: Coast Guard, DHS. ACTION... rally in Alpena, Michigan with a fireworks display. Fireworks will be launched near the end of Mason Street, South of State Avenue, approximately 50 yards west of Thunder Bay in Alpena, Michigan. The...

A Silent Safety Program

NASA Technical Reports Server (NTRS)

Goodin, James Ronald

2006-01-01

NASA's Columbia Accident Investigation Board (CAIB) referred 8 times to the NASA "Silent Safety Program." This term, "Silent Safety Program" was not an original observation but first appeared in the Rogers Commission's Investigation of the Challenger Mishap. The CAIB on page 183 of its report in the paragraph titled 'Encouraging Minority Opinion,' stated "The Naval Reactor Program encourages minority opinions and "bad news." Leaders continually emphasize that when no minority opinions are present, the responsibility for a thorough and critical examination falls to management. . . Board interviews revealed that it is difficult for minority and dissenting opinions to percolate up through the agency's hierarchy. . ." The first question and perhaps the only question is - what is a silent safety program? Well, a silent safety program may be the same as the dog that didn't bark in Sherlock Holmes' "Adventure of the Silver Blaze" because system safety should behave as a devil's advocate for the program barking on every occasion to insure a critical review inclusion. This paper evaluates the NASA safety program and provides suggestions to prevent the recurrence of the silent safety program alluded to in the Challenger Mishap Investigation. Specifically targeted in the CAM report, "The checks and balances the safety system was meant to provide were not working." A silent system safety program is not unique to NASA but could emerge in any and every organization. Principles developed by Irving Janis in his book, Groupthink, listed criteria used to evaluate an organization's cultural attributes that allows a silent safety program to evolve. If evidence validates Jams's criteria, then Jams's recommendations for preventing groupthink can also be used to improve a critical evaluation and thus prevent the development of a silent safety program.

Safety in the Chemical Laboratory. Safety in the Laboratory: Are We Making Any Progress?

ERIC Educational Resources Information Center

McKusick, Blaine C.

1987-01-01

Reviews trends in laboratory safety found in both industrial and academic situations. Reports that large industrial labs generally have excellent safety programs but that, although there have been improvements, academia still lags behind industry in safety. Includes recommendations for improving lab safety. (ML)

14 CFR 1260.37 - Safety.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 5 2011-01-01 2010-01-01 true Safety. 1260.37 Section 1260.37 Aeronautics... Provisions § 1260.37 Safety. Safety October 2000 (a) The Recipient shall act responsibly in matters of safety and shall take all reasonable safety measures in performing under this grant or cooperative agreement...

14 CFR 1260.37 - Safety.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Safety. 1260.37 Section 1260.37 Aeronautics... Provisions § 1260.37 Safety. Safety October 2000 (a) The Recipient shall act responsibly in matters of safety and shall take all reasonable safety measures in performing under this grant or cooperative agreement...

A chief safety officer as the driver and guardian of a great safety rating.

PubMed

Steck, Oliver; Zenker, Daniel; Beatty, Tom

2013-02-01

If the Pharmaceutical Industry were to align to broad metrics that objectively state each product's "Safety Rating" two things would happen. First, Life Sciences companies would refocus dramatically on safety (followed by outcomes). Second, companies that have the highest aggregate "Safety Rating" would enjoy a significant competitive advantage. To achieve and maintain a high safety rating, the role of Safety officer needs to be elevated to the C-Suite.

Safety climate in OHSAS 18001-certified organisations: antecedents and consequences of safety behaviour.

PubMed

Fernández-Muñiz, Beatriz; Montes-Peón, José Manuel; Vázquez-Ordás, Camilo José

2012-03-01

The occupational health and safety standard OHSAS 18001 has gained considerable acceptance worldwide, and firms from diverse sectors and of varying sizes have implemented it. Despite this, very few studies have analysed safety management or the safety climate in OHSAS 18001-certified organisations. The current work aims to analyse the safety climate in these organisations, identify its dimensions, and propose and test a structural equation model that will help determine the antecedents and consequences of employees' safety behaviour. For this purpose, the authors carry out an empirical study using a sample of 131 OHSAS 18001-certified organisations located in Spain. The results show that management's commitment, and particularly communication, have an effect on safety behaviour and on safety performance, employee satisfaction, and firm competitiveness. These findings are particularly important for management since they provide evidence about the factors that should be encouraged to reduce risks and improve performance in this type of organisation. Copyright © 2011 Elsevier Ltd. All rights reserved.

Hydrogen Safety Issues Compared to Safety Issues with Methane and Propane

NASA Astrophysics Data System (ADS)

Green, M. A.

2006-04-01

The hydrogen economy is not possible if the safety standards currently applied to liquid hydrogen and hydrogen gas by many laboratories are applied to devices that use either liquid or gaseous hydrogen. Methane and propane are commonly used by ordinary people without the special training. This report asks, "How is hydrogen different from flammable gasses that are commonly being used all over the world?" This report compares the properties of hydrogen, methane and propane and how these properties may relate to safety when they are used in both the liquid and gaseous state. Through such an analysis, sensible safety standards for the large-scale (or even small-scale) use of liquid and gaseous hydrogen systems can be developed. This paper is meant to promote discussion of issues related to hydrogen safety so that engineers designing equipment can factor sensible safety standards into their designs.

Hydrogen Safety Issues Compared to Safety Issues with Methane andPropane

DOE Office of Scientific and Technical Information (OSTI.GOV)

Green, Michael A.

The hydrogen economy is not possible if the safety standards currently applied to liquid hydrogen and hydrogen gas by many laboratories are applied to devices that use either liquid or gaseous hydrogen. Methane and propane are commonly used by ordinary people without the special training. This report asks, 'How is hydrogen different from flammable gasses that are commonly being used all over the world?' This report compares the properties of hydrogen, methane and propane and how these properties may relate to safety when they are used in both the liquid and gaseous state. Through such an analysis, sensible safety standardsmore » for the large-scale (or even small-scale) use of liquid and gaseous hydrogen systems can be developed. This paper is meant to promote discussion of issues related to hydrogen safety so that engineers designing equipment can factor sensible safety standards into their designs.« less

National Chemistry Teacher Safety Survey

NASA Astrophysics Data System (ADS)

Plohocki, Barbra A.

This study evaluated the status of secondary school instructional chemistry laboratory safety using a survey instrument which focused on Teacher background Information, Laboratory Safety Equipment, Facility Safety, General Safety, and a Safety Content Knowledge Survey. A fifty question survey instrument based on recent research and questions developed by the researcher was mailed to 500 secondary school chemistry teachers who participated in the 1993 one-week Woodrow Wilson National Fellowship Foundation Chemistry Institute conducted at Princeton University, New Jersey. The data received from 303 respondents was analyzed by t tests and Analysis of Variance (ANOVA). The level of significance for the study was set at ~\\ <.05. There was no significant mean difference in test performance on the Safety Content Knowledge Survey and secondary school chemistry teachers who have had undergraduate and/or graduate safety training and those who have not had undergraduate and/or graduate safety training. Secondary school chemistry teachers who attended school district sponsored safety inservices did not score higher on the Safety Content Knowledge Survey than teachers who did not attend school district sponsored safety inservice sessions. The type of school district (urban, suburban, or rural) had no significant correlation to the type of laboratory safety equipment found in the instructional chemistry laboratory. The certification area (chemistry or other type of certificate which may or may not include chemistry) of the secondary school teacher had no significant correlation to the type of laboratory equipment found in the instructional chemistry laboratory. Overall, this study indicated a majority of secondary school chemistry teachers were interested in attending safety workshops applicable to chemistry safety. Throughout this research project, many teachers indicated they were not adequately instructed on the collegiate level in science safety and had to rely on common

Safety Systems

ERIC Educational Resources Information Center

Halligan, Tom

2009-01-01

Colleges across the country are rising to the task by implementing safety programs, response strategies, and technologies intended to create a secure environment for teachers and students. Whether it is preparing and responding to a natural disaster, health emergency, or act of violence, more schools are making campus safety a top priority. At…

The Perception, Level of Safety Satisfaction and Safety Feedback on Occupational Safety and Health Management among Hospital Staff Nurses in Sabah State Health Department

PubMed Central

Cheah, Whye Lian; Giloi, Nelbon; Chang, Ching Thon; Lim, Jac Fang

2012-01-01

Background: This study aimed to determine the perception and level of safety satisfaction of staff nurses with regards to Occupational Safety and Health (OSH) management practice in the Sabah Health Department, and to associate the OSH management dimensions, to Safety Satisfaction and Safety Feedback. Methods: A cross-sectional study using a validated self-administered questionnaire was conducted among randomly respondents. Results: 135 nurses responded the survey. Mean (SD) score for each dimension ranged from 1.70 ± 0.68–4.04 ± 0.65, with Training and Competence dimension (mean [SD], 4.04 ± 0.65) had the highest while Safety Incidence was the least score (mean [SD], 1.70 ± 0.68). Both mean (SD) scores for Safety Satisfaction and Safety Feedback was high, 3.28 ± 0.51 and 3.57 ± 0.73, respectively. Pearson’s correlation analysis indicated that all OSH dimensions had significant correlation with Safety Satisfaction and Safety Feedback (r coefficient ranged from 0.176–0.512) except for Safety Incidence. Conclusion: The overall perception of OSH management was rather low. Significant correlation between Safety Satisfaction and Safety Feedback and several dimensions, suggest that each organization to put in place the leaders who have appropriate leadership and supervisory skills and committed in providing staff training to improve staff’s competency in OSH practice. In addition, clear goals, rules, and reporting system will help the organization to implement proper OSH management practice. PMID:23610550

United States import safety, environmental health, and food safety regulation in China.

PubMed

Nyambok, Edward O; Kastner, Justin J

2012-01-01

China boasts a rapidly growing economy and is a leading food exporter. Since China has dominated world export markets in food, electronics, and toys, many safety concerns about Chinese exports have emerged. For example, many countries have had problems with Chinese food products and food-processing ingredients. Factors behind food safety and environmental health problems in China include poor industrial waste management, the use of counterfeit agricultural inputs, inadequate training of farmers on good farm management practices, and weak food safety laws and poor enforcement. In the face of rising import safety problems, the U.S. is now requiring certification of products and foreign importers, pursuing providing incentives to importers who uphold good safety practices, and considering publicizing the names of certified importers.

STS-99 crew look over safety equipment during TCDT

NASA Technical Reports Server (NTRS)

2000-01-01

At Launch Pad 39A, members of the STS-99 crew and others look over part of the safety equipment. Standing left to right (in uniform) are Commander Kevin Kregel, Pilot Dominic Gorie, and Mission Specialists Janice Voss (Ph.D.), Janet Lynn Kavandi (Ph.D.), Gerhard Thiele and Mamoru Mohri. Thiele is with the European Space Agency and Mohri is with the National Space Development Agency (NASDA) of Japan. The crew are taking part in Terminal Countdown Demonstration Test activities, which provide them with simulated countdown exercises, emergency egress training, and opportunities to inspect the mission payloads in the orbiter's payload bay. STS-99 is the Shuttle Radar Topography Mission, which will chart a new course, using two antennae and a 200-foot-long section of space station-derived mast protruding from the payload bay to produce unrivaled 3-D images of the Earth's surface. The result of the Shuttle Radar Topography Mission could be close to 1 trillion measurements of the Earth's topography. Besides contributing to the production of better maps, these measurements could lead to improved water drainage modeling, more realistic flight simulators, better locations for cell phone towers, and enhanced navigation safety. Launch of Endeavour on the 11-day mission is scheduled for Jan. 31 at 12:47 p.m. EST.

Leadership, safety climate, and continuous quality improvement: impact on process quality and patient safety.

PubMed

McFadden, Kathleen L; Stock, Gregory N; Gowen, Charles R

2014-10-01

Successful amelioration of medical errors represents a significant problem in the health care industry. There is a need for greater understanding of the factors that lead to improved process quality and patient safety outcomes in hospitals. We present a research model that shows how transformational leadership, safety climate, and continuous quality improvement (CQI) initiatives are related to objective quality and patient safety outcome measures. The proposed framework is tested using structural equation modeling, based on data collected for 204 hospitals, and supplemented with objective outcome data from the Centers for Medicare and Medicaid Services. The results provide empirical evidence that a safety climate, which is connected to the chief executive officer's transformational leadership style, is related to CQI initiatives, which are linked to improved process quality. A unique finding of this study is that, although CQI initiatives are positively associated with improved process quality, they are also associated with higher hospital-acquired condition rates, a measure of patient safety. Likewise, safety climate is directly related to improved patient safety outcomes. The notion that patient safety climate and CQI initiatives are not interchangeable or universally beneficial is an important contribution to the literature. The results confirm the importance of using CQI to effectively enhance process quality in hospitals, and patient safety climate to improve patient safety outcomes. The overall pattern of findings suggests that simultaneous implementation of CQI initiatives and patient safety climate produces greater combined benefits.

Leadership, safety climate, and continuous quality improvement: impact on process quality and patient safety.

PubMed

McFadden, Kathleen L; Stock, Gregory N; Gowen, Charles R

2015-01-01

Successful amelioration of medical errors represents a significant problem in the health care industry. There is a need for greater understanding of the factors that lead to improved process quality and patient safety outcomes in hospitals. We present a research model that shows how transformational leadership, safety climate, and continuous quality improvement (CQI) initiatives are related to objective quality and patient safety outcome measures. The proposed framework is tested using structural equation modeling, based on data collected for 204 hospitals, and supplemented with objective outcome data from the Centers for Medicare and Medicaid Services. The results provide empirical evidence that a safety climate, which is connected to the chief executive officer's transformational leadership style, is related to CQI initiatives, which are linked to improved process quality. A unique finding of this study is that, although CQI initiatives are positively associated with improved process quality, they are also associated with higher hospital-acquired condition rates, a measure of patient safety. Likewise, safety climate is directly related to improved patient safety outcomes. The notion that patient safety climate and CQI initiatives are not interchangeable or universally beneficial is an important contribution to the literature. The results confirm the importance of using CQI to effectively enhance process quality in hospitals, and patient safety climate to improve patient safety outcomes. The overall pattern of findings suggests that simultaneous implementation of CQI initiatives and patient safety climate produces greater combined benefits.

76 FR 37643 - Safety Zone; Delta Independence Day Foundation Celebration, Mandeville Island, CA

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-28

... with the pyrotechnics. Unauthorized persons or vessels are prohibited from entering into, transiting... the dangers posed by the pyrotechnics used in this fireworks display, the safety zone is necessary to... fireworks launch site during loading of the pyrotechnics, and during the fireworks display. This restricted...

Roadway safety design workbook.

DOT National Transportation Integrated Search

2009-07-01

Highway safety is an ongoing concern to the Texas Department of Transportation (TxDOT). As part of its : proactive commitment to improving highway safety, TxDOT is moving toward including quantitative safety : analyses earlier in the project developm...

Highway safety design workshops.

DOT National Transportation Integrated Search

2010-11-01

Highway safety is an ongoing concern for the Texas Department of Transportation (TxDOT). As part of its : proactive commitment to improving highway safety, TxDOT is moving toward including quantitative safety : analyses earlier in the project develop...

Systemic safety project selection tool.

DOT National Transportation Integrated Search

2013-07-01

"The Systemic Safety Project Selection Tool presents a process for incorporating systemic safety planning into traditional safety management processes. The Systemic Tool provides a step-by-step process for conducting systemic safety analysis; conside...

Measuring and improving patient safety through health information technology: The Health IT Safety Framework.

PubMed

Singh, Hardeep; Sittig, Dean F

2016-04-01

Health information technology (health IT) has potential to improve patient safety but its implementation and use has led to unintended consequences and new safety concerns. A key challenge to improving safety in health IT-enabled healthcare systems is to develop valid, feasible strategies to measure safety concerns at the intersection of health IT and patient safety. In response to the fundamental conceptual and methodological gaps related to both defining and measuring health IT-related patient safety, we propose a new framework, the Health IT Safety (HITS) measurement framework, to provide a conceptual foundation for health IT-related patient safety measurement, monitoring, and improvement. The HITS framework follows both Continuous Quality Improvement (CQI) and sociotechnical approaches and calls for new measures and measurement activities to address safety concerns in three related domains: 1) concerns that are unique and specific to technology (e.g., to address unsafe health IT related to unavailable or malfunctioning hardware or software); 2) concerns created by the failure to use health IT appropriately or by misuse of health IT (e.g. to reduce nuisance alerts in the electronic health record (EHR)), and 3) the use of health IT to monitor risks, health care processes and outcomes and identify potential safety concerns before they can harm patients (e.g. use EHR-based algorithms to identify patients at risk for medication errors or care delays). The framework proposes to integrate both retrospective and prospective measurement of HIT safety with an organization's existing clinical risk management and safety programs. It aims to facilitate organizational learning, comprehensive 360 degree assessment of HIT safety that includes vendor involvement, refinement of measurement tools and strategies, and shared responsibility to identify problems and implement solutions. A long term framework goal is to enable rigorous measurement that helps achieve the safety