Antibacterial Action of a Condensed Tannin Extracted from Astringent Persimmon as a Component of Food Addictive Pancil PS-M on Oral Polymicrobial Biofilms

PubMed Central

Tomiyama, Kiyoshi; Mukai, Yoshiharu; Saito, Masahiro; Watanabe, Kiyoko; Kumada, Hidefumi; Nihei, Tomotaro; Hamada, Nobushiro; Teranaka, Toshio

2016-01-01

The purpose of this study was to evaluate the antibacterial activity against polymicrobial (PM) biofilms of a condensed tannin extracted from astringent persimmon (PS-M), which is contained in refreshing beverages commercially available in Japan. Salivary PM biofilms were formed anaerobically on glass coverslips for 24 and 72 h and were treated for 5 min with sterilized deionized water (DW), 0.05 and 0.2 wt% chlorhexidine digluconate (CHX), and 0.5–4.0 wt% PS-M solution. The colony forming units (CFU/mL) were determined and morphological changes of the biofilms were observed by scanning electron microscopy (SEM). The CFUs were lower in all PS-M and CHX groups compared to the DW group. PS-M exerted a dose-dependent effect. PS-M (1.53 × 107) at a dose of 4.0 wt% had the same effect as 0.2 wt% CHX (2.03 × 107), regardless of the culture period. SEM revealed the biofilm structures were considerably destroyed in the 4.0 wt% PS-M and 0.2 wt% CHX. These findings indicate that the antibacterial effects of PS-M, a naturally derived substance, are comparable to those of CHX. PS-M may keep the oral cavity clean and prevent dental caries and periodontal disease related to dental plaque, as well as systemic disease such as aspiration pneumonitis. PMID:26981533

Cholesterol effect on water permeability through DPPC and PSM lipid bilayers: a molecular dynamics study.

PubMed

Saito, Hiroaki; Shinoda, Wataru

2011-12-29

Water permeability of two different lipid bilayers of dipalmitoylphosphatidylcholine (DPPC) and palmitoylsphingomyelin (PSM) in the absence and presence of cholesterol (0-50 mol %) have been studied by molecular dynamics simulations to elucidate the molecular mechanism of the reduction in water leakage across the membranes by the addition of cholesterol. An enhanced free energy barrier was observed in these membranes with increased cholesterol concentration, and this was explained by the reduced cavity density around the cholesterol in the hydrophobic membrane core. There was an increase of trans conformers in the hydrophobic lipid chains adjacent to the cholesterol, which reduced the cavity density. The enhanced free energy barrier was found to be the main reason to reduce the water permeability with increased cholesterol concentration. At low cholesterol concentrations the PSM bilayer exhibited a higher free energy barrier than the DPPC bilayer for water permeation, while at greater than 30 mol % of cholesterol the difference became minor. This tendency for the PSM and DPPC bilayers to resemble each other at higher cholesterol concentrations was similar to commonly observed trends in several structural properties, such as order parameters, cross-sectional area per molecule, and cavity density profiles in the hydrophobic regions of bilayer membranes. These results demonstrate that DPPC and PSM bilayers with high cholesterol contents possess similar physical properties, which suggests that the solubility of cholesterol in these lipid bilayers has importance for an understanding of multicomponent lipid membranes with cholesterol. © 2011 American Chemical Society

Training Needs of Purchasing and Supply Management Personnel in Hong Kong

ERIC Educational Resources Information Center

Lau, Antonio K. W.

2010-01-01

Purpose: The importance of purchasing and supply management (PSM) for business performance has received considerable attention in recent years. However, research on PSM training and education is inadequate. This paper aims to present initial findings from PSM practitioners about current PSM training and education needs in Hong Kong.…

Number of positive preoperative biopsy cores is a predictor of positive surgical margins (PSM) in small prostates after robot-assisted radical prostatectomy (RARP).

PubMed

Tuliao, Patrick H; Koo, Kyo C; Komninos, Christos; Chang, Chien H; Choi, Young D; Chung, Byung H; Hong, Sung J; Rha, Koon H

2015-12-01

To determine the impact of prostate size on positive surgical margin (PSM) rates after robot-assisted radical prostatectomy (RARP) and the preoperative factors associated with PSM. In all, 1229 men underwent RARP by a single surgeon, from 2005 to August of 2013. Excluded were patients who had transurethral resection of the prostate, neoadjuvant therapy, clinically advanced cancer, and the first 200 performed cases (to reduce the effect of learning curve). Included were 815 patients who were then divided into three prostate size groups: <31 g (group 1), 31-45 g (group 2), >45 g (group 3). Multivariate analysis determined predictors of PSM and biochemical recurrence (BCR). Console time and blood loss increased with increasing prostate size. There were more high-grade tumours in group 1 (group 1 vs group 2 and group 3, 33.9% vs 25.1% and 25.6%, P = 0.003 and P = 0.005). PSM rates were higher in prostates of <45 g with preoperative PSA levels of >20 ng/dL, Gleason score ≥7, T3 tumour, and ≥3 positive biopsy cores. In group 1, preoperative stage T3 [odds ratio (OR) 3.94, P = 0.020] and ≥3 positive biopsy cores (OR 2.52, P = 0.043) were predictive of PSM, while a PSA level of >20 ng/dL predicted the occurrence of BCR (OR 5.34, P = 0.021). No preoperative factors predicted PSM or BCR for groups 2 and 3. A preoperative biopsy with ≥3 positive cores in men with small prostates predicts PSM after RARP. In small prostates with PSM, a PSA level of >20 ng/dL is a predictor of BCR. These factors should guide the choice of therapy and indicate the need for closer postoperative follow-up. © 2014 The Authors BJU International © 2014 BJU International Published by John Wiley & Sons Ltd.

A films based approach to intensity imbalance correction for 65nm node c:PSM

NASA Astrophysics Data System (ADS)

Cottle, Rand; Sixt, Pierre; Lassiter, Matt; Cangemi, Marc; Martin, Patrick; Progler, Chris

2005-11-01

Intensity imbalance between the 0 and π phase features of c:PSM cause gate CD control and edge placement problems. Strategies such as undercut, selective biasing, and combinations of undercut and bias are currently used in production to mitigate these problems. However, there are drawbacks to these strategies such as space CD delta through pitch, gate CD control through defocus, design rule restrictions, and reticle manufacturability. This paper investigates the application of an innovative films-based approach to intensity balancing known as the Transparent Etch Stop Layer (TESL). TESL, in addition to providing a host of reticle quality and manufacturability benefits, also can be tuned to significantly reduce imbalance. Rigorous 3D vector simulations and experimental data compare through pitch and defocus performance of TESL and conventional c:PSM for 65nm design rules.

Real Time Physiological Status Monitoring (RT-PSM): Accomplishments, Requirements, and Research Roadmap

DTIC Science & Technology

2016-03-01

Maneuver Center of Excellence (US Army - Ft. Benning) MINIMEN Minimalist Wearable Mesh Network Mloco Metabolic Costs of Locomotion MOUT Military...detect blast and ballistic wounding events Quantum Applied Science & Research, Inc. Army A05-163 SBIR 2005 Minimalist Short- Range Wearable for...STTR 2005 (Phase 1) 2005 Minimalist Wearable Mesh Network (MINIMEN) System Develop PSM system linking wearable sensors, mesh networking

Evaluation of TF11 attenuated-PSM mask blanks with DUV laser patterning

NASA Astrophysics Data System (ADS)

Xing, Kezhao; Björnberg, Charles; Karlsson, Henrik; Paulsson, Adisa; Beiming, Peter; Vedenpää, Jukka; Walford, Jonathan

2008-05-01

Tightening requirements on resolution, CD uniformity and positional accuracy push the development of improved photomask blanks. One such blank for 45nm node attenuated phase shift masks (att-PSM) provides a thinner chrome film, TF11, with a higher etch rate compared to previous generation NTAR5 att-PSM blanks from the same supplier. FEP-171, a positive chemically amplified resist, is commonly used in mask manufacturing for both e-beam and DUV laser pattern generators. TF11 chrome allows the FEP-171 resist thickness to be decreased at least down to 2000 Å while maintaining sufficient etch resistance, thereby improving photomask CD performance. The lower stress level in TF11 chrome films also reduces the image placement error induced by the material. In this study, TF11 chrome and FEP-171 resist are evaluated with exposures on a 248 nm DUV laser pattern generator, the Sigma7500. Patterning is first characterized for resist thicknesses of 2000 Å to 2600 Å in steps of 100 Å, assessing the minimum feature resolution, CD linearity, isolated-dense CD bias and dose sensitivity. Swing curve analysis shows a minimum near 2200 Å and a maximum near 2500 Å, corresponding closely to the reflectivity measurements provided by the blank supplier. The best overall patterning performance is obtained when operating near the swing maximum. The patterning performance is then studied in more detail with a resist thickness of 2550 Å that corresponds to the reflectivity maximum. This is compared to the results with 2000 Å resist, a standard thickness for e-beam exposures on TF11. The lithographic performance on NTAR5 att-PSM blanks with 3200 Å resist is also included for reference. This evaluation indicates that TF11 blanks with 2550 Å resist provide the best overall mask patterning performance obtained with the Sigma7500, showing a global CD uniformity below 4 nm (3s) and minimum feature resolution below 100 nm.

Design and Lessons Learned on the Development of a Cryogenic Pupil Select Mechanism (PSM)

NASA Technical Reports Server (NTRS)

Mitchell, Alissa L.; Capon, Thomas L.; Hakun, Claef; Haney, Paul; Koca, Corina; Guzek, Jeffrey

2014-01-01

Calibration and testing of the instruments on the Integrated Science Instrument Module (ISIM) of the James Webb Space Telescope (JWST) is being performed by the use of a cryogenic, full-field, optical simulator that was constructed for this purpose. The Pupil Select Mechanism (PSM) assembly is one of several mechanisms and optical elements that compose the Optical Telescope Element SIMulator, or OSIM. The PSM allows for several optical elements to be inserted into the optical plane of OSIM, introducing a variety of aberrations, distortions, obscurations, and other calibration states into the pupil plane. The following discussion focuses on the details of the design evolution, analysis, build, and test of this mechanism along with the challenges associated with creating a sub arc-minute positioning mechanism operating in an extreme cryogenic environment. In addition, difficult challenges in the control system design will be discussed including the incorporation of closed-loop feedback control into a system that was designed to operate in an open-loop fashion.

Safety management vs. picking leaves.

PubMed

Wright, D

1991-09-01

A safety program will generally have as its base a comprehensive written document made available for everyone in the organization. The document should indicate a positive commitment to safety by management. It should not be a "how to" guide, but rather a broad outline to establish responsibilities, goals, and methods. The safety manager is appointed in writing and answers to the highest level of management. As opposed to a "doer," the safety manager acts as a director and administrator of the safety program. This is accomplished through the advisory capacity of the safety program for solicited and unsolicited problems. The focus of the safety manager is on the system and how it contributes to safety problems, rather than individual problems. Management has the ultimate responsibility for safety. Their efforts should reflect a proactive attitude to correct problems in the system. In order to identify areas of interest, technically competent input from the safety manager should be required. The support of the safety program by top management determines the success of the program. Without a clear and firm commitment by the organization, safety will receive no more than lip service from the employees. The benefits of a proactive approach will be realized in the organization's ability to manage safety issues, rather than reacting to them.

Reducing bird-strike risk at Portsmouth International Airport (PSM) through research on breeding upland sandpiper habitat.

DOT National Transportation Integrated Search

2013-06-01

This report summarizes the results of a study to identify the habitat use and behavior of the upland sandpiper, : a state-endangered bird species, at Portsmouth International Airport (PSM), which is near the Great Bay National : Wildlife Refuge (GBNW...

Quartz 9-inch size mask blanks for ArF PSM (Phase Shift Mask)

NASA Astrophysics Data System (ADS)

Harashima, Noriyuki; Isozaki, Tatsuya; Kawanishi, Arata; Kanai, Shuichiro; Kageyama, Kagehiro; Iso, Hiroyuki; Chishima, Tatsuya

2017-07-01

Semiconductor technology nodes are steadily miniaturizing. On the other hand, various efforts have been made to reduce costs, mass production lines have shifted from 200 mmφ of Si wafer to 300 mmφ, and technology development of Si wafer 450 mmφ is also in progress. As a photomask, 6-inch size binary Cr mask has been used for many years, but in recent years, the use of 9-inch binary Cr masks for Proximity Lithography Process in automotive applications, MEMS, packages, etc. has increased, and cost reduction has been taken. Since the miniaturization will progress in the above applications in the future, products corresponding to miniaturization are also desired in 9-inch photomasks. The high grade Cr - binary mask blanks used in proximity exposure process, there is a prospect of being able to use it by ULVAC COATING CORPORATION's tireless research. As further demands for miniaturization, KrF and ArF Lithography Process, which are used for steppers and scanners , there are also a demand for 9-inch size Mask Blanks. In ULVAC COATING CORPORATION, we developed a 9 - inch size KrF PSM mask Blanks prototype in 2016 and proposed a new high grade 9 - inch photomask. This time, we have further investigated and developed 9-inch size ArF PSM Mask Blanks corresponding to ArF Lithography Process, so we report it.

Achieving Safety through Security Management

NASA Astrophysics Data System (ADS)

Ridgway, John

Whilst the achievement of safety objectives may not be possible purely through the administration of an effective Information Security Management System (ISMS), your job as safety manager will be significantly eased if such a system is in place. This paper seeks to illustrate the point by drawing a comparison between two of the prominent standards within the two disciplines of security and safety management.

From the traditional concept of safety management to safety integrated with quality.

PubMed

García Herrero, Susana; Mariscal Saldaña, Miguel Angel; Manzanedo del Campo, Miguel Angel; Ritzel, Dale O

2002-01-01

This editorial reviews the evolution of the concepts of safety and quality that have been used in the traditional workplace. The traditional programs of safety are explored showing strengths and weaknesses. The concept of quality management is also viewed. Safety management and quality management principles, stages, and measurement are highlighted. The concepts of quality and safety guarantee are assessed. Total Quality Management concepts are reviewed and applied to safety quality. Total safety management principles are discussed. Finally, an analysis of the relationship between quality and safety from data collected from a company in Spain is presented.

RMP Guidance for Warehouses - Appendix D: OSHA Guidance on PSM

EPA Pesticide Factsheets

This text is taken directly from OSHA's appendix C to the Process Safety Management standard (29 CFR 1910.119). Compiled information required by this standard, including material safety data sheets (MSDS), is essential to process hazards analysis (PHA).

Impact of psm-mec in the mobile genetic element on the clinical characteristics and outcome of SCCmec-II methicillin-resistant Staphylococcus aureus bacteraemia in Japan.

PubMed

Aoyagi, T; Kaito, C; Sekimizu, K; Omae, Y; Saito, Y; Mao, H; Inomata, S; Hatta, M; Endo, S; Kanamori, H; Gu, Y; Tokuda, K; Yano, H; Kitagawa, M; Kaku, M

2014-09-01

Over-expression of alpha-phenol-soluble modulins (PSMs) results in high virulence of community-associated methicillin-resistant Staphylococcus aureus (MRSA). The psm-mec gene, located in the mobile genetic element SCCmec-II, suppresses PSMαs production. Fifty-two patients with MRSA bacteraemia were enrolled. MRSA isolates were evaluated with regard to the psm-mec gene sequence, bacterial virulence, and the minimum inhibitory concentration (MIC) of vancomycin and teicoplanin. Fifty-one MRSA isolates were classified as SCCmec-II, and 10 had one point mutation in the psm-mec promoter. We compared clinical characteristics and outcomes between mutant MRSA and wild-type MRSA. Production of PSMα3 in mutant MRSA was significantly increased, but biofilm formation was suppressed. Wild-type MRSA caused more catheter-related bloodstream infections (30/41 vs. 3/10, p 0.0028), whereas mutant MRSA formed more deep abscesses (4/10 vs. 3/41, p 0.035). Bacteraemia caused by mutant MRSA was associated with reduced 30-day mortality (1/10 vs. 13/41, p 0.25), although this difference was not significant. The MIC90 of teicoplanin was higher for wild-type MRSA (1.5 mg/L vs. 1 mg/L), but the MIC of vancomycin was not different between the two groups. The 30-day mortality of MRSA with a high MIC of teicoplanin (≥1.5 mg/L) was higher than that of strains with a lower MIC (≤0.75 mg/L) (6/10 vs. 6/33, p 0.017). Mutation of the psm-mec promoter contributes to virulence of SCCmec-II MRSA, and the product of psm-mec may determine the clinical characteristics of bacteraemia caused by SCCmec-II MRSA, but it does not affect mortality. © 2014 The Authors Clinical Microbiology and Infection © 2014 European Society of Clinical Microbiology and Infectious Diseases.

Poststernotomy mediastinitis: a classification to initiate and evaluate reconstructive management based on evidence from a structured review.

PubMed

van Wingerden, Jan J; Ubbink, Dirk T; van der Horst, Chantal M A M; de Mol, Bas A J M

2014-11-23

Early recognition and, where possible, avoidance of risk factors that contribute to the development of poststernotomy mediastinitis (PSM) form the basis for successful prevention. Once the presence of PSM is diagnosed, the known risk factors have been shown to have limited influence on management decisions. Evidence-based knowledge on treatment decisions, which include the extent and type of surgical intervention (other than debridement), timing and others is available but has not yet been incorporated into a classification on management decisions regarding PSM. Ours is a first attempt at developing a classification system for management of PSM, taking the various evidence-based reconstructive options into consideration. The classification is simple to introduce (there are four Types) and relies on the careful establishment of two variables (sternal stability and sternal bone viability and stock) prior to deciding on the best available reconstructive option. It should allow better insight into why treatment decisions fail or have to be altered and will allow better comparison of treatment outcomes between various institutions.

Safety management by walking around (SMBWA): a safety intervention program based on both peer and manager participation.

PubMed

Luria, Gil; Morag, Ido

2012-03-01

"Management by walking around" (MBWA) is a practice that has aroused much interest in management science and practice. The purpose of this study is to demonstrate adaptation of this practice to safety management. We describe a three-year long case study that collected empirical data in which a modified MBWA was practiced in order to improve safety in a semiconductor fabrication facility. The main modification involved integrating an information system with the MBWA in order to create a practice that would generate safety leadership development and an organizational safety learning mechanism, while promoting employee safety participation. The results of the case study demonstrate that the SMBWA practice facilitated thousands of tours in which safety leadership behaviors were practiced by managers and by employees (employees performed five times as many tours as managers). The information system collected information about safety behaviors and safety conditions that could not otherwise be obtained. Thus, this study presents a new organizational safety practice SMBWA, and demonstrates the ways in which SMBWA may improve safety in organizations. Copyright © 2011 Elsevier Ltd. All rights reserved.

Effective Safety Management in Construction Project

NASA Astrophysics Data System (ADS)

Othman, I.; Shafiq, Nasir; Nuruddin, M. F.

2017-12-01

Effective safety management is one of the serious problems in the construction industry worldwide, especially in large-scale construction projects. There have been significant reductions in the number and the rate of injury over the last 20 years. Nevertheless, construction remains as one of the high risk industry. The purpose of this study is to examine safety management in the Malaysian construction industry, as well as to highlight the importance of construction safety management. The industry has contributed significantly to the economic growth of the country. However, when construction safety management is not implemented systematically, accidents will happen and this can affect the economic growth of the country. This study put the safety management in construction project as one of the important elements to project performance and success. The study emphasize on awareness and the factors that lead to the safety cases in construction project.

Safety, Health, and Fire Prevention Guide for Hospital Safety Managers

DTIC Science & Technology

1993-03-01

Safety committee S 2-5 Oxygen quality assurance program 0 2-6 Safety and fire prevention library 0 2-7 Safety services to Dental Activities • 2-8...Chapter 2 Safety Management 2-1. Safety policy statement Health Services Command (HSC) Supplement (Suppl) 1 to Army Regulation (AR) 385-10 and the...Management. (b) The medical staff. (c) The nursing service . (d) Logistics. (e) Nutritional care. (f) Preventive medicine. * 2-3 USAEHA TG No. 152 March 1993 (g

Form Factor Evaluation of Open Body Area Network (OBAN) Physiological Status Monitoring (PSM) System Prototype Designs

DTIC Science & Technology

2018-05-11

SYSTEM PROTOTYPE DESIGNS DISCLAIMERS The opinions or assertions contained herein are the private views of the author(s) and are not to be construed as...FORM FACTOR EVALUATION OF OPEN BODY AREA NETWORK (OBAN) PHYSIOLOGICAL STATUS MONITORING (PSM) SYSTEM PROTOTYPE DESIGNS William J...security; and is designed to function for 72 hours or more. The test described in this report assesses proposed form-factor designs . Feedback using

Road Infrastructure Safety Management in Poland

NASA Astrophysics Data System (ADS)

Budzynski, Marcin; Jamroz, Kazimierz; Kustra, Wojciech; Michalski, Lech; Gaca, Stanislaw

2017-10-01

The objective of road safety infrastructure management is to ensure that when roads are planned, designed, built and used road risks can be identified, assessed and mitigated. Road transport safety is significantly less developed than that of rail, water and air transport. The average individual risk of being a fatality in relation to the distance covered is thirty times higher in road transport that in the other modes. This is mainly because the different modes have a different approach to safety management and to the use of risk management methods and tools. In recent years Poland has had one of the European Union’s highest road death numbers. In 2016 there were 3026 fatalities on Polish roads with 40,766 injuries. Protecting road users from the risk of injury and death should be given top priority. While Poland’s national and regional road safety programmes address this problem and are instrumental in systematically reducing the number of casualties, the effects are far from the expectations. Modern approaches to safety focus on three integrated elements: infrastructure measures, safety management and safety culture. Due to its complexity, the process of road safety management requires modern tools to help with identifying road user risks, assess and evaluate the safety of road infrastructure and select effective measures to improve road safety. One possible tool for tackling this problem is the risk-based method for road infrastructure safety management. European Union Directive 2008/96/EC regulates and proposes a list of tools for managing road infrastructure safety. Road safety tools look at two criteria: the life cycle of a road structure and the process of risk management. Risk can be minimized through the application of the proposed interventions during design process as reasonable. The proposed methods of risk management bring together two stages: risk assessment and risk response occurring within the analyzed road structure (road network, road

Predicting safety culture: the roles of employer, operations manager and safety professional.

PubMed

Wu, Tsung-Chih; Lin, Chia-Hung; Shiau, Sen-Yu

2010-10-01

This study explores predictive factors in safety culture. In 2008, a sample 939 employees was drawn from 22 departments of a telecoms firm in five regions in central Taiwan. The sample completed a questionnaire containing four scales: the employer safety leadership scale, the operations manager safety leadership scale, the safety professional safety leadership scale, and the safety culture scale. The sample was then randomly split into two subsamples. One subsample was used for measures development, one for the empirical study. A stepwise regression analysis found four factors with a significant impact on safety culture (R²=0.337): safety informing by operations managers; safety caring by employers; and safety coordination and safety regulation by safety professionals. Safety informing by operations managers (ß=0.213) was by far the most significant predictive factor. The findings of this study provide a framework for promoting a positive safety culture at the group level. Crown Copyright © 2010. Published by Elsevier Ltd. All rights reserved.

Associations between safety climate and safety management practices in the construction industry.

PubMed

Marín, Luz S; Lipscomb, Hester; Cifuentes, Manuel; Punnett, Laura

2017-06-01

Safety climate, a group-level measure of workers' perceptions regarding management's safety priorities, has been suggested as a key predictor of safety outcomes. However, its relationship with actual injury rates is inconsistent. We posit that safety climate may instead be a parallel outcome of workplace safety practices, rather than a determinant of workers' safety behaviors or outcomes. Using a sample of 25 commercial construction companies in Colombia, selected by injury rate stratum (high, medium, low), we examined the relationship between workers' safety climate perceptions and safety management practices (SMPs) reported by safety officers. Workers' perceptions of safety climate were independent of their own company's implementation of SMPs, as measured here, and its injury rates. However, injury rates were negatively related to the implementation of SMPs. Safety management practices may be more important than workers' perceptions of safety climate as direct predictors of injury rates. © 2017 Wiley Periodicals, Inc.

76 FR 14592 - Safety Management System; Withdrawal

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-17

...-06A] RIN 2120-AJ15 Safety Management System; Withdrawal AGENCY: Federal Aviation Administration (FAA... (``product/ service providers'') to develop a Safety Management System (SMS). The FAA is withdrawing the... management with a set of robust decision-making tools to use to improve safety. The FAA received 89 comments...

Safety intelligence: an exploration of senior managers' characteristics.

PubMed

Fruhen, L S; Mearns, K J; Flin, R; Kirwan, B

2014-07-01

Senior managers can have a strong influence on organisational safety. But little is known about which of their personal attributes support their impact on safety. In this paper, we introduce the concept of 'safety intelligence' as related to senior managers' ability to develop and enact safety policies and explore possible characteristics related to it in two studies. Study 1 (N = 76) involved direct reports to chief executive officers (CEOs) of European air traffic management (ATM) organisations, who completed a short questionnaire asking about characteristics and behaviours that are ideal for a CEO's influence on safety. Study 2 involved senior ATM managers (N = 9) in various positions in interviews concerning their day-to-day work on safety. Both studies indicated six attributes of senior managers as relevant for their safety intelligence, particularly, social competence and safety knowledge, followed by motivation, problem-solving, personality and interpersonal leadership skills. These results have recently been applied in guidance for safety management practices in a White Paper published by EUROCONTROL. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Safety Management Systems.

ERIC Educational Resources Information Center

Fido, A. T.; Wood, D. O.

This document discusses the issues that need to be considered by the education and training system as it responds to the changing needs of industry in Great Britain. Following a general introduction, the development of quality management ideas is traced. The underlying principles of safety and risk management are clarified and the implications of…

SafetyAnalyst : software tools for safety management of specific highway sites

DOT National Transportation Integrated Search

2010-07-01

SafetyAnalyst provides a set of software tools for use by state and local highway agencies for highway safety management. SafetyAnalyst can be used by highway agencies to improve their programming of site-specific highway safety improvements. SafetyA...

Managing Safety and Operations: The Effect of Joint Management System Practices on Safety and Operational Outcomes.

PubMed

Tompa, Emile; Robson, Lynda; Sarnocinska-Hart, Anna; Klassen, Robert; Shevchenko, Anton; Sharma, Sharvani; Hogg-Johnson, Sheilah; Amick, Benjamin C; Johnston, David A; Veltri, Anthony; Pagell, Mark

2016-03-01

The aim of this study was to determine whether management system practices directed at both occupational health and safety (OHS) and operations (joint management system [JMS] practices) result in better outcomes in both areas than in alternative practices. Separate regressions were estimated for OHS and operational outcomes using data from a survey along with administrative records on injuries and illnesses. Organizations with JMS practices had better operational and safety outcomes than organizations without these practices. They had similar OHS outcomes as those with operations-weak practices, and in some cases, better outcomes than organizations with safety-weak practices. They had similar operational outcomes as those with safety-weak practices, and better outcomes than those with operations-weak practices. Safety and operations appear complementary in organizations with JMS practices in that there is no penalty for either safety or operational outcomes.

Restaurant manager and worker food safety certification and knowledge.

PubMed

Brown, Laura G; Le, Brenda; Wong, Melissa R; Reimann, David; Nicholas, David; Faw, Brenda; Davis, Ernestine; Selman, Carol A

2014-11-01

Over half of foodborne illness outbreaks occur in restaurants. To combat these outbreaks, many public health agencies require food safety certification for restaurant managers, and sometimes workers. Certification entails passing a food safety knowledge examination, which is typically preceded by food safety training. Current certification efforts are based on the assumption that certification leads to greater food safety knowledge. The Centers for Disease Control and Prevention conducted this study to examine the relationship between food safety knowledge and certification. We also examined the relationships between food safety knowledge and restaurant, manager, and worker characteristics. We interviewed managers (N=387) and workers (N=365) about their characteristics and assessed their food safety knowledge. Analyses showed that certified managers and workers had greater food safety knowledge than noncertified managers and workers. Additionally, managers and workers whose primary language was English had greater food safety knowledge than those whose primary language was not English. Other factors associated with greater food safety knowledge included working in a chain restaurant, working in a larger restaurant, having more experience, and having more duties. These findings indicate that certification improves food safety knowledge, and that complex relationships exist among restaurant, manager, and worker characteristics and food safety knowledge.

Restaurant Manager and Worker Food Safety Certification and Knowledge

PubMed Central

Brown, Laura G.; Le, Brenda; Wong, Melissa R.; Reimann, David; Nicholas, David; Faw, Brenda; Davis, Ernestine; Selman, Carol A.

2017-01-01

Over half of foodborne illness outbreaks occur in restaurants. To combat these outbreaks, many public health agencies require food safety certification for restaurant managers, and sometimes workers. Certification entails passing a food safety knowledge examination, which is typically preceded by food safety training. Current certification efforts are based on the assumption that certification leads to greater food safety knowledge. The Centers for Disease Control and Prevention conducted this study to examine the relationship between food safety knowledge and certification. We also examined the relationships between food safety knowledge and restaurant, manager, and worker characteristics. We interviewed managers (N = 387) and workers (N = 365) about their characteristics and assessed their food safety knowledge. Analyses showed that certified managers and workers had greater food safety knowledge than noncertified managers and workers. Additionally, managers and workers whose primary language was English had greater food safety knowledge than those whose primary language was not English. Other factors associated with greater food safety knowledge included working in a chain restaurant, working in a larger restaurant, having more experience, and having more duties. These findings indicate that certification improves food safety knowledge, and that complex relationships exist among restaurant, manager, and worker characteristics and food safety knowledge. PMID:25361386

46 CFR 107.415 - Safety Management Certificate.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Safety Management Certificate. 107.415 Section 107.415 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Certificates Under International Convention for Safety of Life at Sea, 1974 § 107.415 Safety Management Certificate. (a)...

Initial development of a practical safety audit tool to assess fleet safety management practices.

PubMed

Mitchell, Rebecca; Friswell, Rena; Mooren, Lori

2012-07-01

Work-related vehicle crashes are a common cause of occupational injury. Yet, there are few studies that investigate management practices used for light vehicle fleets (i.e. vehicles less than 4.5 tonnes). One of the impediments to obtaining and sharing information on effective fleet safety management is the lack of an evidence-based, standardised measurement tool. This article describes the initial development of an audit tool to assess fleet safety management practices in light vehicle fleets. The audit tool was developed by triangulating information from a review of the literature on fleet safety management practices and from semi-structured interviews with 15 fleet managers and 21 fleet drivers. A preliminary useability assessment was conducted with 5 organisations. The audit tool assesses the management of fleet safety against five core categories: (1) management, systems and processes; (2) monitoring and assessment; (3) employee recruitment, training and education; (4) vehicle technology, selection and maintenance; and (5) vehicle journeys. Each of these core categories has between 1 and 3 sub-categories. Organisations are rated at one of 4 levels on each sub-category. The fleet safety management audit tool is designed to identify the extent to which fleet safety is managed in an organisation against best practice. It is intended that the audit tool be used to conduct audits within an organisation to provide an indicator of progress in managing fleet safety and to consistently benchmark performance against other organisations. Application of the tool by fleet safety researchers is now needed to inform its further development and refinement and to permit psychometric evaluation. Copyright © 2012 Elsevier Ltd. All rights reserved.

Health and safety management systems: liability or asset?

PubMed

Bennett, David

2002-01-01

Health and safety management systems have a background in theory and in various interests among employers and workplace health and safety professionals. These have resulted in a number of national systems emanating from national standard-writing centres and from employers' organizations. In some cases these systems have been recognized as national standards. The contenders for an international standard have been the International Organization of Standardization (ISO) and the International Labour Organization (ILO). The quality and environmental management systems of ISO indicate what an ISO health and safety management standard would look like. The ILO Guidelines on Safety and Health Management Systems, by contrast, are stringent, specific and potentially effective in improving health and safety performance in the workplace.

46 CFR 71.75-13 - Safety Management Certificate.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Safety Management Certificate. 71.75-13 Section 71.75-13... CERTIFICATION Certificates Under the International Convention for Safety of Life at Sea, 1960 § 71.75-13 Safety... valid Safety Management Certificate and a copy of their company's valid Document of Compliance...

RMP Guidance for Chemical Distributors - Appendix D: OSHA Guidance on PSM

EPA Pesticide Factsheets

Guidance on the Process Safety Management standard says information (including MSDS) about chemicals, including process intermediates, must enable accurate assessment of fire/explosion characteristics, reactivity hazards, and corrosing/erosion effects.

Perceived safety management practices in the logistics sector.

PubMed

Auyong, Hui-Nee; Zailani, Suhaiza; Surienty, Lilis

2016-03-09

Malaysia's progress on logistics has been slowed to keep pace with its growth in trade. The Government has been pressing companies to improve the safety of their activities in order to reduce society's loss due to occupational accidents and illnesses. Occupational safety and health is a crucial part of a workplace because every worker has to take care of his/her own safety and health. The main occupational safety and health (OSH) national policy in Malaysia is the enactment of the Occupational Safety and Health Act (OSHA) 1994. Only those companies which have excellent health and safety care have good quality and productive employees. This study investigated safety management practices in the logistics sector. The present study is concerned with the human factors to safety in the logistics industry. The authors examined the perceived safety management practices of workers in the logistics sector. The purpose was to identify the perception of safety management practices of Malaysian logistics personnel. Survey questionnaires were distributed to assess logistics personnel about management commitment. The quantitative method using the availability sampling method was applied. The data gathered from the survey were analysed using SPSS software. The responses to the survey were rated according to the Likert scale type, with '1' indicating strongly disagree and '5' indicating strongly agree. One hundred and three employees of logistics functions completed the survey. The highest mean scores were found for fire apparatus, prioritisation of safety, and safety policy. The results from this study also emphasise the importance of the management's commitment in enhancing workplace safety. Specifically, companies should maintain good relations between the employer and the employee to help reduce workplace injuries.

System safety management: A new discipline

NASA Technical Reports Server (NTRS)

Pope, W. C.

1971-01-01

The systems theory is discussed in relation to safety management. It is suggested that systems safety management, as a new discipline, holds great promise for reducing operating errors, conserving labor resources, avoiding operating costs due to mistakes, and for improving managerial techniques. It is pointed out that managerial failures or system breakdowns are the basic reasons for human errors and condition defects. In this respect, a recommendation is made that safety engineers stop visualizing the problem only with the individual (supervisor or employee) and see the problem from the systems point of view.

Another Approach to Enhance Airline Safety: Using Management Safety Tools

NASA Technical Reports Server (NTRS)

Lu, Chien-tsug; Wetmore, Michael; Przetak, Robert

2006-01-01

The ultimate goal of conducting an accident investigation is to prevent similar accidents from happening again and to make operations safer system-wide. Based on the findings extracted from the investigation, the "lesson learned" becomes a genuine part of the safety database making risk management available to safety analysts. The airline industry is no exception. In the US, the FAA has advocated the usage of the System Safety concept in enhancing safety since 2000. Yet, in today s usage of System Safety, the airline industry mainly focuses on risk management, which is a reactive process of the System Safety discipline. In order to extend the merit of System Safety and to prevent accidents beforehand, a specific System Safety tool needs to be applied; so a model of hazard prediction can be formed. To do so, the authors initiated this study by reviewing 189 final accident reports from the National Transportation Safety Board (NTSB) covering FAR Part 121 scheduled operations. The discovered accident causes (direct hazards) were categorized into 10 groups Flight Operations, Ground Crew, Turbulence, Maintenance, Foreign Object Damage (FOD), Flight Attendant, Air Traffic Control, Manufacturer, Passenger, and Federal Aviation Administration. These direct hazards were associated with 36 root factors prepared for an error-elimination model using Fault Tree Analysis (FTA), a leading tool for System Safety experts. An FTA block-diagram model was created, followed by a probability simulation of accidents. Five case studies and reports were provided in order to fully demonstrate the usefulness of System Safety tools in promoting airline safety.

Evidence-based safety (EBS) management: A new approach to teaching the practice of safety management (SM).

PubMed

Wang, Bing; Wu, Chao; Shi, Bo; Huang, Lang

2017-12-01

In safety management (SM), it is important to make an effective safety decision based on the reliable and sufficient safety-related information. However, many SM failures in organizations occur for a lack of the necessary safety-related information for safety decision-making. Since facts are the important basis and foundation for decision-making, more efforts to seek the best evidence relevant to a particular SM problem would lead to a more effective SM solution. Therefore, the new paradigm for decision-making named "evidence-based practice (EBP)" can hold important implications for SM, because it uses the current best evidence for effective decision-making. Based on a systematic review of existing SM approaches and an analysis of reasons why we need new SM approaches, we created a new SM approach called evidence-based safety (EBS) management by introducing evidence-based practice into SM. It was necessary to create new SM approaches. A new SM approach called EBS was put forward, and the basic questions of EBS such as its definition and core were analyzed in detail. Moreover, the determinants of EBS included manager's attitudes towards EBS; evidence-based consciousness in SM; evidence sources; technical support; EBS human resources; organizational culture; and individual attributes. EBS is a new and effective approach to teaching the practice of SM. Of course, further research on EBS should be carried out to make EBS a reality. Practical applications: Our work can provide a new and effective idea and method to teach the practice of SM. Specifically, EBS proposed in our study can help safety professionals make an effective safety decision based on a firm foundation of high-grade evidence. Copyright © 2017 National Safety Council and Elsevier Ltd. All rights reserved.

The Research on Safety Management Information System of Railway Passenger Based on Risk Management Theory

NASA Astrophysics Data System (ADS)

Zhu, Wenmin; Jia, Yuanhua

2018-01-01

Based on the risk management theory and the PDCA cycle model, requirements of the railway passenger transport safety production is analyzed, and the establishment of the security risk assessment team is proposed to manage risk by FTA with Delphi from both qualitative and quantitative aspects. The safety production committee is also established to accomplish performance appraisal, which is for further ensuring the correctness of risk management results, optimizing the safety management business processes and improving risk management capabilities. The basic framework and risk information database of risk management information system of railway passenger transport safety are designed by Ajax, Web Services and SQL technologies. The system realizes functions about risk management, performance appraisal and data management, and provides an efficient and convenient information management platform for railway passenger safety manager.

Improving safety in small enterprises through an integrated safety management intervention.

PubMed

Kines, Pete; Andersen, Dorte; Andersen, Lars Peter; Nielsen, Kent; Pedersen, Louise

2013-02-01

This study tests the applicability of a participatory behavior-based injury prevention approach integrated with safety culture initiatives. Sixteen small metal industry enterprises (10-19 employees) are randomly assigned to receive the intervention or not. Safety coaching of owners/managers result in the identification of 48 safety tasks, 85% of which are solved at follow-up. Owner/manager led constructive dialogue meetings with workers result in the prioritization of 29 tasks, 79% of which are accomplished at follow-up. Intervention enterprises have significant increases on six of eight safety-perception-survey factors, while comparisons increase on only one factor. Both intervention and comparison enterprises demonstrate significant increases in their safety observation scores. Interview data validate and supplement these results, providing some evidence for behavior change and the initiation of safety culture change. Given that over 95% of enterprises in most countries have less than 20 employees, there is great potential for adapting this integrated approach to other industries. Copyright © 2012 National Safety Council and Elsevier Ltd. All rights reserved.

Safety behavior: Job demands, job resources, and perceived management commitment to safety.

PubMed

Hansez, Isabelle; Chmiel, Nik

2010-07-01

The job demands-resources model posits that job demands and resources influence outcomes through job strain and work engagement processes. We test whether the model can be extended to effort-related "routine" safety violations and "situational" safety violations provoked by the organization. In addition we test more directly the involvement of job strain than previous studies which have used burnout measures. Structural equation modeling provided, for the first time, evidence of predicted relationships between job strain and "routine" violations and work engagement with "routine" and "situational" violations, thereby supporting the extension of the job demands-resources model to safety behaviors. In addition our results showed that a key safety-specific construct 'perceived management commitment to safety' added to the explanatory power of the job demands-resources model. A predicted path from job resources to perceived management commitment to safety was highly significant, supporting the view that job resources can influence safety behavior through both general motivational involvement in work (work engagement) and through safety-specific processes.

Achievements and Perspectives of the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Louvat, D.; Lacoste, A.C.

The Joint Convention on the Safety of Spent Fuel management and on the Safety of Radioactive Waste Management is the first legal instrument to directly address the safety of spent fuel and radioactive waste management on a global scale. The Joint Convention entered into force in 2001. This paper describes its process and its main achievements to date. The perspectives to establish of a Global Waste Safety Regime based on the Joint Convention are also discussed. (authors)

33 CFR 96.220 - What makes up a safety management system?

Code of Federal Regulations, 2011 CFR

2011-07-01

... SECURITY VESSEL OPERATING REGULATIONS RULES FOR THE SAFE OPERATION OF VESSELS AND SAFETY MANAGEMENT SYSTEMS Company and Vessel Safety Management Systems § 96.220 What makes up a safety management system? (a) The safety management system must document the responsible person's— (1) Safety and pollution prevention...

Management Commitment to Safety, Teamwork, and Hospital Worker Injuries.

PubMed

McGonagle, Alyssa K; Essenmacher, Lynnette; Hamblin, Lydia; Luborsky, Mark; Upfal, Mark; Arnetz, Judith

2016-01-01

Although many studies link teamwork in health care settings to patient safety, evidence linking teamwork to hospital worker safety is lacking. This study addresses this gap by providing evidence linking teamwork perceptions in hospital workers to worker injuries, and further, finds a linkage between manager commitment to safety and teamwork. Organizational records of worker injuries and survey responses regarding management commitment to safety and teamwork from 446 hospital workers within 42 work units in a multi-site hospital system were examined. Results underscored the particular importance of teamwork on worker injuries as well as the importance of management commitment to safety as relating to teamwork. To improve worker safety, organizational leaders and unit managers should work to maintain environments wherein teamwork can thrive.

Management Commitment to Safety, Teamwork, and Hospital Worker Injuries

PubMed Central

McGonagle, Alyssa K.; Essenmacher, Lynnette; Hamblin, Lydia; Luborsky, Mark; Upfal, Mark; Arnetz, Judith

2016-01-01

Although many studies link teamwork in health care settings to patient safety, evidence linking teamwork to hospital worker safety is lacking. This study addresses this gap by providing evidence linking teamwork perceptions in hospital workers to worker injuries, and further, finds a linkage between manager commitment to safety and teamwork. Organizational records of worker injuries and survey responses regarding management commitment to safety and teamwork from 446 hospital workers within 42 work units in a multi-site hospital system were examined. Results underscored the particular importance of teamwork on worker injuries as well as the importance of management commitment to safety as relating to teamwork. To improve worker safety, organizational leaders and unit managers should work to maintain environments wherein teamwork can thrive. PMID:27867448

Safety and Waste Management for SAM Pathogen Methods

EPA Pesticide Factsheets

The General Safety and Waste Management page offers section-specific safety and waste management details for the pathogens included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

Safety and Waste Management for SAM Biotoxin Methods

EPA Pesticide Factsheets

The General Safety and Waste Management page offers section-specific safety and waste management details for the biotoxins included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

Safety and Waste Management for SAM Chemistry Methods

EPA Pesticide Factsheets

The General Safety and Waste Management page offers section-specific safety and waste management details for the chemical analytes included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

Safety and Waste Management for SAM Radiochemical Methods

EPA Pesticide Factsheets

The General Safety and Waste Management page offers section-specific safety and waste management details for the radiochemical analytes included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

46 CFR 91.60-30 - Safety Management Certificate.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Safety Management Certificate. 91.60-30 Section 91.60-30 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS INSPECTION AND CERTIFICATION Certificates Under International Convention for Safety of Life at Sea, 1974 § 91.60-30 Safety Management Certificate. All...

Can Civility Norms Boost Positive Effects of Management Commitment to Safety?

PubMed

McGonagle, Alyssa K; Childress, Niambi M; Walsh, Benjamin M; Bauerle, Timothy J

2016-07-03

We proposed that civility norms would strengthen relationships between management commitment to safety and workers' safety motivation, safety behaviors, and injuries. Survey data were obtained from working adults in hazardous jobs-those for which physical labor is required and/or a realistic possibility of physical injury is present (N = 290). Results showed that management commitment positively related to workers' safety motivation, safety participation, and safety compliance, and negatively related to minor injuries. Furthermore, management commitment to safety displayed a stronger positive relationship with safety motivation and safety participation, and a stronger negative relationship with minor worker injuries when civility norms were high (versus low). The results confirm existing known relationships between management commitment to safety and worker safety motivation and behavior; furthermore, civility norms facilitate the relationships between management commitment to safety and various outcomes important to worker safety. In order to promote an optimally safe working environment, managers should demonstrate a commitment to worker safety and promote positive norms for interpersonal treatment between workers in their units.

General Safety and Waste Management Related to SAM

EPA Pesticide Factsheets

The General Safety and Waste Management page offers section-specific safety and waste management details for chemicals, radiochemicals, pathogens, and biotoxins included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

The role of the ward manager in promoting patient safety.

PubMed

Pinnock, David

In this article the role of the ward manager in promoting patient safety is explored. The background to the development of the patient safety agenda is briefly discussed and the relationship between quality and safety is illustrated. The pivotal importance of the role of the ward manager in delivering services to patients is underlined and literature on patient safety is examined to identify what a ward manager can do to make care safer. Possible actions of the ward manager to improve safety discussed in the literature are structured around the Leadership Framework. This framework identifies seven domains for the leadership of service delivery. Ward managers use their personal qualities, and network and work within teams, while managing performance and facilitating innovation, change and measurement for improvement. The challenge of promoting patient safety for ward managers is briefly explored and recommendations for further research are made.

46 CFR 126.480 - Safety Management Certificate.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Safety Management Certificate. 126.480 Section 126.480 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS INSPECTION AND CERTIFICATION Inspection for Certification § 126.480 Safety Management Certificate. (a) All offshore supply vessels of 500 gross tons or over to...

Applying Sensor-Based Technology to Improve Construction Safety Management.

PubMed

Zhang, Mingyuan; Cao, Tianzhuo; Zhao, Xuefeng

2017-08-11

Construction sites are dynamic and complicated systems. The movement and interaction of people, goods and energy make construction safety management extremely difficult. Due to the ever-increasing amount of information, traditional construction safety management has operated under difficult circumstances. As an effective way to collect, identify and process information, sensor-based technology is deemed to provide new generation of methods for advancing construction safety management. It makes the real-time construction safety management with high efficiency and accuracy a reality and provides a solid foundation for facilitating its modernization, and informatization. Nowadays, various sensor-based technologies have been adopted for construction safety management, including locating sensor-based technology, vision-based sensing and wireless sensor networks. This paper provides a systematic and comprehensive review of previous studies in this field to acknowledge useful findings, identify the research gaps and point out future research directions.

Impact of access management practices to pedestrian safety.

DOT National Transportation Integrated Search

2017-03-31

This study focused on the impact of access management practices to the safety of pedestrians. Some : of the access management practices considered to impact pedestrian safety included limiting direct : access to and from major streets, locating signa...

Research on station management in subway operation safety

NASA Astrophysics Data System (ADS)

Li, Yiman

2017-10-01

The management of subway station is an important part of the safe operation of urban subway. In order to ensure the safety of subway operation, it is necessary to study the relevant factors that affect station management. In the protection of subway safety operations on the basis of improving the quality of service, to promote the sustained and healthy development of subway stations. This paper discusses the influencing factors of subway operation accident and station management, and analyzes the specific contents of station management security for subway operation, and develops effective suppression measures. It is desirable to improve the operational quality and safety factor for subway operations.

Effects of organizational safety on employees' proactivity safety behaviors and occupational health and safety management systems in Chinese high-risk small-scale enterprises.

PubMed

Mei, Qiang; Wang, Qiwei; Liu, Suxia; Zhou, Qiaomei; Zhang, Jingjing

2018-06-07

Based on the characteristics of small-scale enterprises, the improvement of occupational health and safety management systems (OHS MS) needs an effective intervention. This study proposed a structural equation model and examined the relationships of perceived organization support for safety (POSS), person-organization safety fit (POSF) and proactivity safety behaviors with safety management, safety procedures and safety hazards identification. Data were collected from 503 employees of 105 Chinese high-risk small-scale enterprises over 6 months. The results showed that both POSS and POSF were positively related to improvement in safety management, safety procedures and safety hazards identification through proactivity safety behaviors. Our findings provide a new perspective on organizational safety for improving OHS MS for small-scale enterprises and extend the application of proactivity safety behaviors.

Safety management in a relationship-oriented culture.

PubMed

Hsu, Shang Hwa; Lee, Chun-Chia

2012-01-01

A relationship-oriented culture predominates in the Greater China region, where it is more important than in Western countries. Some characteristics of this culture influence strongly the organizational structure and interactions among members in an organization. This study aimed to explore the possible influence of relationships on safety management in relationship-oriented cultures. We hypothesized that organizational factors (management involvement and harmonious relationships) within a relationship-oriented culture would influence supervisory work (ongoing monitoring and task instructions), the reporting system (selective reporting), and teamwork (team communication and co-ordination) in safety management at a group level, which would in turn influence individual reliance complacency, risk awareness, and practices. We distributed a safety climate questionnaire to the employees of Taiwanese high-risk industries. The results of structural equation modeling supported the hypothesis. This article also discusses the findings and implications for safety improvement in countries with a relationship-oriented culture.

Applying Sensor-Based Technology to Improve Construction Safety Management

PubMed Central

Zhang, Mingyuan; Cao, Tianzhuo; Zhao, Xuefeng

2017-01-01

Construction sites are dynamic and complicated systems. The movement and interaction of people, goods and energy make construction safety management extremely difficult. Due to the ever-increasing amount of information, traditional construction safety management has operated under difficult circumstances. As an effective way to collect, identify and process information, sensor-based technology is deemed to provide new generation of methods for advancing construction safety management. It makes the real-time construction safety management with high efficiency and accuracy a reality and provides a solid foundation for facilitating its modernization, and informatization. Nowadays, various sensor-based technologies have been adopted for construction safety management, including locating sensor-based technology, vision-based sensing and wireless sensor networks. This paper provides a systematic and comprehensive review of previous studies in this field to acknowledge useful findings, identify the research gaps and point out future research directions. PMID:28800061

Examining the Relationship between Safety Management System Implementation and Safety Culture in Collegiate Flight Schools

ERIC Educational Resources Information Center

Robertson, Mike Fuller

2017-01-01

Safety Management Systems (SMS) are becoming the industry standard for safety management throughout the aviation industry. As the Federal Aviation Administration (FAA) continues to mandate SMS for different segments, the assessment of an organization's safety culture becomes more important. An SMS can facilitate the development of a strong…

33 CFR 96.220 - What makes up a safety management system?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false What makes up a safety management... SECURITY VESSEL OPERATING REGULATIONS RULES FOR THE SAFE OPERATION OF VESSELS AND SAFETY MANAGEMENT SYSTEMS Company and Vessel Safety Management Systems § 96.220 What makes up a safety management system? (a) The...

Managing health and safety risks: Implications for tailoring health and safety management system practices.

PubMed

Willmer, D R; Haas, E J

2016-01-01

As national and international health and safety management system (HSMS) standards are voluntarily accepted or regulated into practice, organizations are making an effort to modify and integrate strategic elements of a connected management system into their daily risk management practices. In high-risk industries such as mining, that effort takes on added importance. The mining industry has long recognized the importance of a more integrated approach to recognizing and responding to site-specific risks, encouraging the adoption of a risk-based management framework. Recently, the U.S. National Mining Association led the development of an industry-specific HSMS built on the strategic frameworks of ANSI: Z10, OHSAS 18001, The American Chemistry Council's Responsible Care, and ILO-OSH 2001. All of these standards provide strategic guidance and focus on how to incorporate a plan-do-check-act cycle into the identification, management and evaluation of worksite risks. This paper details an exploratory study into whether practices associated with executing a risk-based management framework are visible through the actions of an organization's site-level management of health and safety risks. The results of this study show ways that site-level leaders manage day-to-day risk at their operations that can be characterized according to practices associated with a risk-based management framework. Having tangible operational examples of day-to-day risk management can serve as a starting point for evaluating field-level risk assessment efforts and their alignment to overall company efforts at effective risk mitigation through a HSMS or other processes.

Safety cost management in construction companies: A proposal classification.

PubMed

López-Alonso, M; Ibarrondo-Dávila, M P; Rubio, M C

2016-06-16

Estimating health and safety costs in the construction industry presents various difficulties, including the complexity of cost allocation, the inadequacy of data available to managers and the absence of an accounting model designed specifically for safety cost management. Very often, the costs arising from accidents in the workplace are not fully identifiable due to the hidden costs involved. This paper reviews some studies of occupational health and safety cost management and proposes a means of classifying these costs. We conducted an empirical study in which the health and safety costs of 40 construction worksites are estimated. A new classification of the health and safety cost and its categories is proposed: Safety and non-safety costs. The costs of the company's health and safety policy should be included in the information provided by the accounting system, as a starting point for analysis and control. From this perspective, a classification of health and safety costs and its categories is put forward.

Safety management of complex research operators

NASA Technical Reports Server (NTRS)

Brown, W. J.

1981-01-01

Complex research and technology operations present varied potential hazards which are addressed in a disciplined, independent safety review and approval process. Potential hazards vary from high energy fuels to hydrocarbon fuels, high pressure systems to high voltage systems, toxic chemicals to radioactive materials and high speed rotating machinery to high powered lasers. A Safety Permit System presently covers about 600 potentially hazardous operations. The Safety Management Program described is believed to be a major factor in maintaining an excellent safety record.

[Quality management and safety culture in medicine: context and concepts].

PubMed

Wischet, Werner; Eitzinger, Claudia

2009-01-01

The publication of the IOM report "To err is human: building a safer health system" in 1999 put spotlight on the primacy of the principle of primum non nocere and made patient safety a central topic of quality management. A key conclusion of the report was the need for a well-developed safety culture. While concepts of quality management have evolved along the lines of ISO and Total Quality Management over the last decades patient safety still has not got the same amount of attention (PubMed). Evidence from other safety-critical areas but also from the field of medicine itself suggests that an efficient culture of safety is a conditio sine qua non for the sustainable improvement of patient safety. Considering these arguments the present paper aims at emphasizing the importance of an efficient culture of safety for patient safety and quality management in healthcare. In addition, key instruments of safety culture as well as their limitations will be presented.

Ethical issues in patient safety: Implications for nursing management.

PubMed

Kangasniemi, Mari; Vaismoradi, Mojtaba; Jasper, Melanie; Turunen, Hannele

2013-12-01

The purpose of this article is to discuss the ethical issues impacting the phenomenon of patient safety and to present implications for nursing management. Previous knowledge of this perspective is fragmented. In this discussion, the main drivers are identified and formulated in 'the ethical imperative' of patient safety. Underlying values and principles are considered, with the aim of increasing their visibility for nurse managers' decision-making. The contradictory nature of individual and utilitarian safety is identified as a challenge in nurse management practice, together with the context of shared responsibility and identification of future challenges. As a conclusion, nurse managers play a strategic role in patient safety. Their role is to incorporate ethical values of patient safety into decision-making at all levels in an organization, and also to encourage clinical nurses to consider values in the provision of care to patients. Patient safety that is sensitive to ethics provides sustainable practice where the humanity and dignity of all stakeholders are respected.

Road safety issues for bus transport management.

PubMed

Cafiso, Salvatore; Di Graziano, Alessandro; Pappalardo, Giuseppina

2013-11-01

Because of the low percentage of crashes involving buses and the assumption that public transport improves road safety by reducing vehicular traffic, public interest in bus safety is not as great as that in the safety of other types of vehicles. It is possible that less attention is paid to the significance of crashes involving buses because the safety level of bus systems is considered to be adequate. The purpose of this study was to evaluate the knowledge and perceptions of bus managers with respect to safety issues and the potential effectiveness of various technologies in achieving higher safety standards. Bus managers were asked to give their opinions on safety issues related to drivers (training, skills, performance evaluation and behaviour), vehicles (maintenance and advanced devices) and roads (road and traffic safety issues) in response to a research survey. Kendall's algorithm was used to evaluate the level of concordance. The results showed that the majority of the proposed items were considered to have great potential for improving bus safety. The data indicated that in the experience of the participants, passenger unloading and pedestrians crossing near bus stops are the most dangerous actions with respect to vulnerable users. The final results of the investigation showed that start inhibition, automatic door opening, and the materials and internal architecture of buses were considered the items most strongly related to bus passenger safety. Brake assistance and vehicle monitoring systems were also considered to be very effective. With the exception of driver assistance systems for passenger and pedestrian safety, the perceptions of the importance of other driver assistance systems for vehicle monitoring and bus safety were not unanimous among the bus company managers who participated in this survey. The study results showed that the introduction of new technologies is perceived as an important factor in improving bus safety, but a better understanding

75 FR 68224 - Safety Management Systems for Part 121 Certificate Holders

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-05

... the general framework for an organization-wide safety management approach to air carrier operations... System? An SMS is an organization-wide approach to managing safety risk and assuring the effectiveness of... under 14 CFR part 121 to develop and implement a safety management system (SMS) to improve the safety of...

Safety Psychology Applicating on Coal Mine Safety Management Based on Information System

NASA Astrophysics Data System (ADS)

Hou, Baoyue; Chen, Fei

In recent years, with the increase of intensity of coal mining, a great number of major accidents happen frequently, the reason mostly due to human factors, but human's unsafely behavior are affected by insecurity mental control. In order to reduce accidents, and to improve safety management, with the help of application security psychology, we analyse the cause of insecurity psychological factors from human perception, from personality development, from motivation incentive, from reward and punishment mechanism, and from security aspects of mental training , and put forward countermeasures to promote coal mine safety production,and to provide information for coal mining to improve the level of safety management.

Implementation of safety management systems in Hong Kong construction industry - A safety practitioner's perspective.

PubMed

Yiu, Nicole S N; Sze, N N; Chan, Daniel W M

2018-02-01

In the 1980s, the safety management system (SMS) was introduced in the construction industry to mitigate against workplaces hazards, reduce the risk of injuries, and minimize property damage. Also, the Factories and Industrial Undertakings (Safety Management) Regulation was introduced on 24 November 1999 in Hong Kong to empower the mandatory implementation of a SMS in certain industries including building construction. Therefore, it is essential to evaluate the effectiveness of the SMS in improving construction safety and identify the factors that influence its implementation in Hong Kong. A review of the current state-of-the-practice helped to establish the critical success factors (CSFs), benefits, and difficulties of implementing the SMS in the construction industry, while structured interviews were used to establish the key factors of the SMS implementation. Results of the state-of-the-practice review and structured interviews indicated that visible senior commitment, in terms of manpower and cost allocation, and competency of safety manager as key drivers for the SMS implementation. More so, reduced accident rates and accident costs, improved organization framework, and increased safety audit ratings were identified as core benefits of implementing the SMS. Meanwhile, factors such as insufficient resources, tight working schedule, and high labor turnover rate were the key challenges to the effective SMS implementation in Hong Kong. The findings of the study were consistent and indicative of the future development of safety management practice and the sustainable safety improvement of Hong Kong construction industry in the long run. Copyright © 2018 National Safety Council and Elsevier Ltd. All rights reserved.

The evolving role and care management approaches of safety-net Medicaid managed care plans.

PubMed

Gusmano, Michael K; Sparer, Michael S; Brown, Lawrence D; Rowe, Catherine; Gray, Bradford

2002-12-01

This article provides new empirical data about the viability and the care management activities of Medicaid managed-care plans sponsored by provider organizations that serve Medicaid and other low-income populations. Using survey and case study methods, we studied these "safety-net" health plans in 1998 and 2000. Although the number of safety-net plans declined over this period, the surviving plans were larger and enjoying greater financial success than the plans we surveyed in 1998. We also found that, based on a partnership with providers, safety-net plans are moving toward more sophisticated efforts to manage the care of their enrollees. Our study suggests that, with supportive state policies, safety-net plans are capable of remaining viable. Contracting with safety-net plans may not be an efficient mechanism for enabling Medicaid recipients to "enter the mainstream of American health care," but it may provide states with an effective way to manage and coordinate the care of Medicaid recipients, while helping to maintain the health care safety-net for the uninsured.

Requirements Analysis for the Army Safety Management Information System (ASMIS)

DTIC Science & Technology

1989-03-01

8217_>’ Telephone Number « .. PNL-6819 Limited Distribution Requirements Analysis for the Army Safety Management Information System (ASMIS) Final...PNL-6819 REQUIREMENTS ANALYSIS FOR THE ARMY SAFETY MANAGEMENT INFORMATION SYSTEM (ASMIS) FINAL REPORT J. S. Littlefield A. L. Corrigan March...accidents. This accident data is available under the Army Safety Management Information System (ASMIS) which is an umbrella for many databases

The determinants of employee participation in occupational health and safety management.

PubMed

Masso, Märt

2015-01-01

This article focuses on employee direct participation in occupational health and safety (OHS) management. The article explains what determines employee opportunities to participate in OHS management. The explanatory framework focuses on safety culture and safety management at workplaces. The framework is empirically tested using Estonian cross-sectional, multilevel data of organizations and their employees. The analysis indicates that differences in employee participation in OHS management in the Estonian case could be explained by differences in OHS management practices rather than differences in safety culture. This indicates that throughout the institutional change and shift to the European model of employment relations system, change in management practices has preceded changes in safety culture which according to theoretical argument is supposed to follow culture change.

Human factors in safety and business management.

PubMed

Vogt, Joachim; Leonhardt, Jorg; Koper, Birgit; Pennig, Stefan

2010-02-01

Human factors in safety is concerned with all those factors that influence people and their behaviour in safety-critical situations. In aviation these are, for example, environmental factors in the cockpit, organisational factors such as shift work, human characteristics such as ability and motivation of staff. Careful consideration of human factors is necessary to improve health and safety at work by optimising the interaction of humans with their technical and social (team, supervisor) work environment. This provides considerable benefits for business by increasing efficiency and by preventing incidents/accidents. The aim of this paper is to suggest management tools for this purpose. Management tools such as balanced scorecards (BSC) are widespread instruments and also well known in aviation organisations. Only a few aviation organisations utilise management tools for human factors although they are the most important conditions in the safety management systems of aviation organisations. One reason for this is that human factors are difficult to measure and therefore also difficult to manage. Studies in other domains, such as workplace health promotion, indicate that BSC-based tools are useful for human factor management. Their mission is to develop a set of indicators that are sensitive to organisational performance and help identify driving forces as well as bottlenecks. Another tool presented in this paper is the Human Resources Performance Model (HPM). HPM facilitates the integrative assessment of human factors programmes on the basis of a systematic performance analysis of the whole system. Cause-effect relationships between system elements are defined in process models in a first step and validated empirically in a second step. Thus, a specific representation of the performance processes is developed, which ranges from individual behaviour to system performance. HPM is more analytic than BSC-based tools because HPM also asks why a certain factor is

USDOT guidance summary for connected vehicle deployments : safety management.

DOT National Transportation Integrated Search

2016-07-01

This document provides guidance material in regards to safety management plan for the CV Pilots DeploymentConcept Development Phase. This guidance provides key concepts and references in developing the SafetyManagement Plan in Task 4, lists relevant ...

The Design of a Practical Enterprise Safety Management System

NASA Astrophysics Data System (ADS)

Gabbar, Hossam A.; Suzuki, Kazuhiko

This book presents design guidelines and implementation approaches for enterprise safety management system as integrated within enterprise integrated systems. It shows new model-based safety management where process design automation is integrated with enterprise business functions and components. It proposes new system engineering approach addressed to new generation chemical industry. It will help both the undergraduate and professional readers to build basic knowledge about issues and problems of designing practical enterprise safety management system, while presenting in clear way, the system and information engineering practices to design enterprise integrated solution.

Laboratory Safety and Management

ERIC Educational Resources Information Center

Goodenough, T. J.

1976-01-01

Explains a scientific approach to accident prevention and outlines the safety aspects associated with the handling of chemicals in the secondary school. Provides a check list of unsafe acts and conditions, outlines features of good laboratory management, and gives hints for combating the effects of inflation on science budgets. (GS)

Scale development of safety management system evaluation for the airline industry.

PubMed

Chen, Ching-Fu; Chen, Shu-Chuan

2012-07-01

The airline industry relies on the implementation of Safety Management System (SMS) to integrate safety policies and augment safety performance at both organizational and individual levels. Although there are various degrees of SMS implementation in practice, a comprehensive scale measuring the essential dimensions of SMS is still lacking. This paper thus aims to develop an SMS measurement scale from the perspective of aviation experts and airline managers to evaluate the performance of company's safety management system, by adopting Schwab's (1980) three-stage scale development procedure. The results reveal a five-factor structure consisting of 23 items. The five factors include documentation and commands, safety promotion and training, executive management commitment, emergency preparedness and response plan and safety management policy. The implications of this SMS evaluation scale for practitioners and future research are discussed. Copyright © 2012 Elsevier Ltd. All rights reserved.

The Safety Attitudes of Senior Managers in the Chinese Coal Industry.

PubMed

Zhang, Jiangshi; Chen, Na; Fu, Gui; Yan, Mingwei; Kim, Young-Chan

2016-11-17

Introduction: Senior managers' attitudes towards safety are very important regarding the safety practices in an organization. The study is to describe the current situation of senior managers' attitudes towards safety in the Chinese coal industry. Method : We evaluated the changing trends as well as the reasons for these changes in the Chinese coal industry in 2009 and in 2014 with 168 senior manager samples from large Chinese state-owned coal enterprises. Evaluations of 15 safety concepts were performed by means of a questionnaire. Results and Conclusions : Results indicate that, in 2014, three concepts were at a very high level (mean > 4.5), and six were at a relatively high level (4.5 > mean > 4.0). Analyses of changing trends revealed that nine concepts improved significantly, while four greatly declined in 2014 compared to those in 2009. The data reported here suggest that the reasons for the significant improvement with respect to the nine concepts include the improvement in social and legal environments, the improvement of the culture of social safety, workers' safety demands being met, and scientific and technical advances in the coal industry. The decline of the four concepts seemed to be caused by a poor awareness of managers in the coal industry that safety creates economic benefits, insufficient information on safety, inadequate attention to the development of a safety culture and safety management methods, and safety organizations and workers' unions not playing their role effectively. Practical Applications : We therefore recommend strengthening the evidence that safety creates economic benefits, providing incentives for employees to encourage their participation in safety management, and paying more attention to the prevention of accidents in coal mines via safety organizations and unions. These results can provide guidelines for workers, industrialists, and government regarding occupational safety in the whole coal industry.

Implementing local agency safety management

DOT National Transportation Integrated Search

2003-12-17

For local agencies to mount a successful effort toward reducing motor vehicle collisions and their costs, an effective systematic approach must be taken. A Safety Management System (SMS) has two basic components: a collaborative information exchange ...

Safety management of complex research operations

NASA Technical Reports Server (NTRS)

Brown, W. J.

1981-01-01

Complex research and technology operations present many varied potential hazards which must be addressed in a disciplined independent safety review and approval process. The research and technology effort at the Lewis Research Center is divided into programmatic areas of aeronautics, space and energy. Potential hazards vary from high energy fuels to hydrocarbon fuels, high pressure systems to high voltage systems, toxic chemicals to radioactive materials and high speed rotating machinery to high powered lasers. A Safety Permit System presently covers about 600 potentially hazardous operations. The Safety Management Program described in this paper is believed to be a major factor in maintaining an excellent safety record at the Lewis Research Center.

Exploring Robust Methods for Evaluating Treatment and Comparison Groups in Chronic Care Management Programs

PubMed Central

Hamar, Brent; Bradley, Chastity; Gandy, William M.; Harrison, Patricia L.; Sidney, James A.; Coberley, Carter R.; Rula, Elizabeth Y.; Pope, James E.

2013-01-01

Abstract Evaluation of chronic care management (CCM) programs is necessary to determine the behavioral, clinical, and financial value of the programs. Financial outcomes of members who are exposed to interventions (treatment group) typically are compared to those not exposed (comparison group) in a quasi-experimental study design. However, because member assignment is not randomized, outcomes reported from these designs may be biased or inefficient if study groups are not comparable or balanced prior to analysis. Two matching techniques used to achieve balanced groups are Propensity Score Matching (PSM) and Coarsened Exact Matching (CEM). Unlike PSM, CEM has been shown to yield estimates of causal (program) effects that are lowest in variance and bias for any given sample size. The objective of this case study was to provide a comprehensive comparison of these 2 matching methods within an evaluation of a CCM program administered to a large health plan during a 2-year time period. Descriptive and statistical methods were used to assess the level of balance between comparison and treatment members pre matching. Compared with PSM, CEM retained more members, achieved better balance between matched members, and resulted in a statistically insignificant Wald test statistic for group aggregation. In terms of program performance, the results showed an overall higher medical cost savings among treatment members matched using CEM compared with those matched using PSM (-$25.57 versus -$19.78, respectively). Collectively, the results suggest CEM is a viable alternative, if not the most appropriate matching method, to apply when evaluating CCM program performance. (Population Health Management 2013;16:35–45) PMID:22788834

Differences in Hospital Managers', Unit Managers', and Health Care Workers' Perceptions of the Safety Climate for Respiratory Protection.

PubMed

Peterson, Kristina; Rogers, Bonnie M E; Brosseau, Lisa M; Payne, Julianne; Cooney, Jennifer; Joe, Lauren; Novak, Debra

2016-07-01

This article compares hospital managers' (HM), unit managers' (UM), and health care workers' (HCW) perceptions of respiratory protection safety climate in acute care hospitals. The article is based on survey responses from 215 HMs, 245 UMs, and 1,105 HCWs employed by 98 acute care hospitals in six states. Ten survey questions assessed five of the key dimensions of safety climate commonly identified in the literature: managerial commitment to safety, management feedback on safety procedures, coworkers' safety norms, worker involvement, and worker safety training. Clinically and statistically significant differences were found across the three respondent types. HCWs had less positive perceptions of management commitment, worker involvement, and safety training aspects of safety climate than HMs and UMs. UMs had more positive perceptions of management's supervision of HCWs' respiratory protection practices. Implications for practice improvements indicate the need for frontline HCWs' inclusion in efforts to reduce safety climate barriers and better support effective respiratory protection programs and daily health protection practices. © 2016 The Author(s).

The Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Risoluti, P.

The Joint Convention on the Safety of Spent Fuel Management and the Safety of Radioactive Waste Management (the Joint Convention) is the only legally binding international treaty in the area of radioactive waste management. It was adopted by a Diplomatic Conference in September 1997 and opened for signature on 29 September 1997. The Convention entered into force on 18 June 1998, and to date (September 04) has been signed by 42 States, of which 34 have formally ratified, thus becoming Contracting Parties. The Joint Convention applies to spent fuel and radioactive waste resulting from civilian application. Its principal aim ismore » to achieve and maintain a high degree of safety in their management worldwide. The Convention is an incentive instrument, not designed to ensure fulfillment of obligations through control and sanction, but by a peer pressure. The obligations of the Contracting Parties are mainly based on the international safety standards developed by the IAEA in past decades. The Convention is intended for all countries generating radioactive waste. Therefore it is relevant not only for those using nuclear power, but for any country where application of nuclear energy in medicine, conventional industry and research is currently used. Obligations of Contracting Parties include attending periodic Review Meetings and prepare National Reports for review by the other Contracting Parties. The National Reports should describe how the country is complying with the requirements of the Articles of the Convention. The first such meeting was held at the IAEA headquarters in November 2003. This paper will describe the origin of the Convention, present its content, the expected outcome for the worldwide safety, and the benefits for a country to be part of it.« less

Quality management, a directive approach to patient safety.

PubMed

Ayuso-Murillo, Diego; de Andrés-Gimeno, Begoña; Noriega-Matanza, Concha; López-Suárez, Rafael Jesús; Herrera-Peco, Ivan

Nowadays the implementation of effective quality management systems and external evaluation in healthcare is a necessity to ensure not only transparency in activities related to health but also access to health and patient safety. The key to correctly implementing a quality management system is support from the managers of health facilities, since it is managers who design and communicate to health professionals the strategies of action involved in quality management systems. This article focuses on nursing managers' approach to quality management through the implementation of cycles of continuous improvement, participation of improvement groups, monitoring systems and external evaluation quality models (EFQM, ISO). The implementation of a quality management system will enable preventable adverse effects to be minimized or eliminated, and promote patient safety and safe practice by health professionals. Copyright © 2017 Elsevier España, S.L.U. All rights reserved.

The Art World's Concept of Negative Space Applied to System Safety Management

NASA Technical Reports Server (NTRS)

Goodin, James Ronald (Ronnie)

2005-01-01

Tools from several different disciplines can improve system safety management. This paper relates the Art World with our system safety world, showing useful art schools of thought applied to system safety management, developing an art theory-system safety bridge. This bridge is then used to demonstrate relations with risk management, the legal system, personnel management and basic management (establishing priorities). One goal of this presentation/paper is simply to be a fun diversion from the many technical topics presented during the conference.

OPC and PSM design using inverse lithography: a nonlinear optimization approach

NASA Astrophysics Data System (ADS)

Poonawala, Amyn; Milanfar, Peyman

2006-03-01

We propose a novel method for the fast synthesis of low complexity model-based optical proximity correction (OPC) and phase shift masks (PSM) to improve the resolution and pattern fidelity of optical microlithography. We use the pixel-based mask representation, a continuous function formulation, and gradient based iterative optimization techniques to solve the above inverse problem. The continuous function formulation allows analytic calculation of the gradient. Pixel-based parametrization provides tremendous liberty in terms of the features possible in the synthesized masks, but also suffers the inherent disadvantage that the masks are very complex and difficult to manufacture. We therefore introduce the regularization framework; a useful tool which provides the flexibility to promote certain desirable properties in the solution. We employ the above framework to ensure that the estimated masks have only two or three (allowable) transmission values and are also comparatively simple and easy to manufacture. The results demonstrate that we are able to bring the CD on target using OPC masks. Furthermore, we were also able to boost the contrast of the aerial image using attenuated, strong, and 100% transmission phase shift masks. Our algorithm automatically (and optimally) adds assist-bars, dog-ears, serifs, anti-serifs, and other custom structures best suited for printing the desired pattern.

Intranet-based safety documentation in management of major hazards and occupational health and safety.

PubMed

Leino, Antti

2002-01-01

In the European Union, Council Directive 96/82/EC requires operators producing, using, or handling significant amounts of dangerous substances to improve their safety management systems in order to better manage the major accident potentials deriving from human error. A new safety management system for the Viikinmäki wastewater treatment plant in Helsinki, Finland, was implemented in this study. The system was designed to comply with both the new safety liabilities and the requirements of OHSAS 18001 (British Standards Institute, 1999). During the implementation phase experiences were gathered from the development processes in this small organisation. The complete documentation was placed in the intranet of the plant. Hyperlinks between documents were created to ensure convenience of use. Documentation was made accessible for all workers from every workstation.

The Perception, Level of Safety Satisfaction and Safety Feedback on Occupational Safety and Health Management among Hospital Staff Nurses in Sabah State Health Department.

PubMed

Cheah, Whye Lian; Giloi, Nelbon; Chang, Ching Thon; Lim, Jac Fang

2012-07-01

This study aimed to determine the perception and level of safety satisfaction of staff nurses with regards to Occupational Safety and Health (OSH) management practice in the Sabah Health Department, and to associate the OSH management dimensions, to Safety Satisfaction and Safety Feedback. A cross-sectional study using a validated self-administered questionnaire was conducted among randomly respondents. 135 nurses responded the survey. Mean (SD) score for each dimension ranged from 1.70 ± 0.68-4.04 ± 0.65, with Training and Competence dimension (mean [SD], 4.04 ± 0.65) had the highest while Safety Incidence was the least score (mean [SD], 1.70 ± 0.68). Both mean (SD) scores for Safety Satisfaction and Safety Feedback was high, 3.28 ± 0.51 and 3.57 ± 0.73, respectively. Pearson's correlation analysis indicated that all OSH dimensions had significant correlation with Safety Satisfaction and Safety Feedback (r coefficient ranged from 0.176-0.512) except for Safety Incidence. The overall perception of OSH management was rather low. Significant correlation between Safety Satisfaction and Safety Feedback and several dimensions, suggest that each organization to put in place the leaders who have appropriate leadership and supervisory skills and committed in providing staff training to improve staff's competency in OSH practice. In addition, clear goals, rules, and reporting system will help the organization to implement proper OSH management practice.

The Joint Convention on the Safety of Spent fuel Management and on the safety of Radioactive Waste Management: A UK Regulator's Perspective

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lacey, D.; Bacon, M.L.

The UK fully supports the objective of the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management to achieve and maintain a high level of safety worldwide in spent fuel and radioactive waste management, through the enhancement of national measures and international co-operation, including where appropriate, safety-related co-operation. The UK's Health and Safety Executive, through its Nuclear Safety Directorate (NSD), has been committed to the Convention since the initial negotiations to set up the Convention and provided the president of the first review meeting in 2003. It would be wrong of anymore » nation to believe that they have all the best solutions to managing spent fuel and radioactive waste. The process of compiling reports for the Convention review meetings provides a structured process through which every contracting party can review its provisions against a common set of standards and identify for itself possible areas of improvements. The sharing of reports and the asking and answering of questions then provides a further opportunity for both sharing of experience and learning. The UK was encouraged by the spirit of constructive discussion rather than negative criticism that pervaded the first review meeting that provided an incentive for all to learn and improve. While, as could be expected of the first meeting of such a group, not everything worked as well as could be hoped for, all parties seemed committed to learn from mistakes and to make the process more effective. Lessons were learned from the Nuclear Safety Convention on the process of submitting reports electronically and the UK actively supported aims to use IAEA requirements documents as an additional focus for reports. This should, we hope, provide for even better benchmarking of achievements and provide feedback for improvements of the IAEA requirements where appropriate. In summary, the UK finds the Joint Convention process to be a

Safety management of a complex R&D ground operating system

NASA Technical Reports Server (NTRS)

Connors, J. F.; Maurer, R. A.

1975-01-01

A perspective on safety program management has been developed for a complex R&D operating system, such as the NASA-Lewis Research Center. Using a systems approach, hazardous operations are subjected to third-party reviews by designated area safety committees and are maintained under safety permit controls. To insure personnel alertness, emergency containment forces and employees are trained in dry-run emergency simulation exercises. The keys to real safety effectiveness are top management support and visibility of residual risks.

A case for safety leadership team training of hospital managers.

PubMed

Singer, Sara J; Hayes, Jennifer; Cooper, Jeffrey B; Vogt, Jay W; Sales, Michael; Aristidou, Angela; Gray, Garry C; Kiang, Mathew V; Meyer, Gregg S

2011-01-01

Delivering safe patient care remains an elusive goal. Resolving problems in complex organizations like hospitals requires managers to work together. Safety leadership training that encourages managers to exercise learning-oriented, team-based leadership behaviors could promote systemic problem solving and enhance patient safety. Despite the need for such training, few programs teach multidisciplinary groups of managers about specific behaviors that can enhance their role as leadership teams in the realm of patient safety. The aims of this study were to describe a learning-oriented, team-based, safety leadership training program composed of reinforcing exercises and to provide evidence confirming the need for such training and demonstrating behavior change among management groups after training. Twelve groups of managers from an academic medical center based in the Northeast United States were randomly selected to participate in the program and exposed to its customized, experience-based, integrated, multimodal curriculum. We extracted data from transcripts of four training sessions over 15 months with groups of managers about the need for the training in these groups and change in participants' awareness, professional behaviors, and group activity. Training transcripts confirmed the need for safety leadership team training and provided evidence of the potential for training to increase targeted behaviors. The training increased awareness and use of leadership behaviors among many managers and led to new routines and coordinated effort among most management groups. Enhanced learning-oriented leadership often helped promote a learning orientation in managers' work areas. Team-based training that promotes specific learning-oriented leader behaviors can promote behavioral change among multidisciplinary groups of hospital managers.

Effect of Occupational Health and Safety Management System on Work-Related Accident Rate and Differences of Occupational Health and Safety Management System Awareness between Managers in South Korea's Construction Industry

PubMed Central

Yoon, Seok J.; Lin, Hsing K.; Chen, Gang; Yi, Shinjea; Choi, Jeawook; Rui, Zhenhua

2013-01-01

Background The study was conducted to investigate the current status of the occupational health and safety management system (OHSMS) in the construction industry and the effect of OHSMS on accident rates. Differences of awareness levels on safety issues among site general managers and occupational health and safety (OHS) managers are identified through surveys. Methods The accident rates for the OHSMS-certified construction companies from 2006 to 2011, when the construction OHSMS became widely available, were analyzed to understand the effect of OHSMS on the work-related injury rates in the construction industry. The Korea Occupational Safety and Health Agency 18001 is the certification to these companies performing OHSMS in South Korea. The questionnaire was created to analyze the differences of OHSMS awareness between site general managers and OHS managers of construction companies. Results The implementation of OHSMS among the top 100 construction companies in South Korea shows that the accident rate decreased by 67% and the fatal accident rate decreased by 10.3% during the period from 2006 to 2011. The survey in this study shows different OHSMS awareness levels between site general managers and OHS managers. The differences were motivation for developing OHSMS, external support needed for implementing OHSMS, problems and effectiveness of implementing OHSMS. Conclusion Both work-related accident and fatal accident rates were found to be significantly reduced by implementing OHSMS in this study. The differences of OHSMS awareness between site general managers and OHS managers were identified through a survey. The effect of these differences on safety and other benefits warrants further research with proper data collection. PMID:24422176

Effect of Occupational Health and Safety Management System on Work-Related Accident Rate and Differences of Occupational Health and Safety Management System Awareness between Managers in South Korea's Construction Industry.

PubMed

Yoon, Seok J; Lin, Hsing K; Chen, Gang; Yi, Shinjea; Choi, Jeawook; Rui, Zhenhua

2013-12-01

The study was conducted to investigate the current status of the occupational health and safety management system (OHSMS) in the construction industry and the effect of OHSMS on accident rates. Differences of awareness levels on safety issues among site general managers and occupational health and safety (OHS) managers are identified through surveys. The accident rates for the OHSMS-certified construction companies from 2006 to 2011, when the construction OHSMS became widely available, were analyzed to understand the effect of OHSMS on the work-related injury rates in the construction industry. The Korea Occupational Safety and Health Agency 18001 is the certification to these companies performing OHSMS in South Korea. The questionnaire was created to analyze the differences of OHSMS awareness between site general managers and OHS managers of construction companies. The implementation of OHSMS among the top 100 construction companies in South Korea shows that the accident rate decreased by 67% and the fatal accident rate decreased by 10.3% during the period from 2006 to 2011. The survey in this study shows different OHSMS awareness levels between site general managers and OHS managers. The differences were motivation for developing OHSMS, external support needed for implementing OHSMS, problems and effectiveness of implementing OHSMS. Both work-related accident and fatal accident rates were found to be significantly reduced by implementing OHSMS in this study. The differences of OHSMS awareness between site general managers and OHS managers were identified through a survey. The effect of these differences on safety and other benefits warrants further research with proper data collection.

Advanced Test Reactor Safety Basis Upgrade Lessons Learned Relative to Design Basis Verification and Safety Basis Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

G. L. Sharp; R. T. McCracken

The Advanced Test Reactor (ATR) is a pressurized light-water reactor with a design thermal power of 250 MW. The principal function of the ATR is to provide a high neutron flux for testing reactor fuels and other materials. The reactor also provides other irradiation services such as radioisotope production. The ATR and its support facilities are located at the Test Reactor Area of the Idaho National Engineering and Environmental Laboratory (INEEL). An audit conducted by the Department of Energy's Office of Independent Oversight and Performance Assurance (DOE OA) raised concerns that design conditions at the ATR were not adequately analyzedmore » in the safety analysis and that legacy design basis management practices had the potential to further impact safe operation of the facility.1 The concerns identified by the audit team, and issues raised during additional reviews performed by ATR safety analysts, were evaluated through the unreviewed safety question process resulting in shutdown of the ATR for more than three months while these concerns were resolved. Past management of the ATR safety basis, relative to facility design basis management and change control, led to concerns that discrepancies in the safety basis may have developed. Although not required by DOE orders or regulations, not performing design basis verification in conjunction with development of the 10 CFR 830 Subpart B upgraded safety basis allowed these potential weaknesses to be carried forward. Configuration management and a clear definition of the existing facility design basis have a direct relation to developing and maintaining a high quality safety basis which properly identifies and mitigates all hazards and postulated accident conditions. These relations and the impact of past safety basis management practices have been reviewed in order to identify lessons learned from the safety basis upgrade process and appropriate actions to resolve possible concerns with respect to the current ATR

Behavior-Based Safety and Occupational Risk Management

ERIC Educational Resources Information Center

Geller, E. Scott

2005-01-01

The behavior-based approach to managing occupational risk and preventing workplace injuries is reviewed. Unlike the typical top-down control approach to industrial safety, behavior-based safety (BBS) provides tools and procedures workers can use to take personal control of occupational risks. Strategies the author and his colleagues have been…

46 CFR 115.925 - Safety Management Certificate.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Safety Management Certificate. 115.925 Section 115.925 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS CARRYING MORE THAN 150 PASSENGERS OR WITH OVERNIGHT ACCOMMODATIONS FOR MORE THAN 49 PASSENGERS INSPECTION AND CERTIFICATION International Convention for Safety...

33 CFR 96.230 - What objectives must a safety management system meet?

Code of Federal Regulations, 2010 CFR

2010-07-01

... management system meet? 96.230 Section 96.230 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY VESSEL OPERATING REGULATIONS RULES FOR THE SAFE OPERATION OF VESSELS AND SAFETY MANAGEMENT SYSTEMS Company and Vessel Safety Management Systems § 96.230 What objectives must a safety...

[Patient safety in management contracts].

PubMed

Campillo-Artero, C

2012-01-01

Patient safety is becoming commonplace in management contracts. Since our experience in patient safety still falls short of other clinical areas, it is advisable to review some of its characteristics in order to improve its inclusion in these contracts. In this paper opinions and recommendations concerning the design and review of contractual clauses on safety are given, as well as reflections drawn from methodological papers and informal opinions of clinicians, who are most familiar with the nuances of safe and unsafe practices. After reviewing some features of these contracts, criteria for prioritizing and including safety objectives and activities in them, and key points for their evaluation are described. The need to replace isolated activities by systemic and multifaceted ones is emphasized. Errors, limitations and improvement opportunities observed when contracts are linked to indicators, information and adverse event reporting systems are analysed. Finally, the influence of the rules of the game, and clinicians behaviour are emphasised. Copyright © 2011 SECA. Published by Elsevier Espana. All rights reserved.

NYC CV Pilot Deployment : Safety Management Plan : New York City.

DOT National Transportation Integrated Search

2016-04-22

This safety management plan identifies preliminary safety hazards associated with the New York City Connected Vehicle Pilot Deployment project. Each of the hazards is rated, and a plan for managing the risks through detailed design and deployment is ...

The Perception, Level of Safety Satisfaction and Safety Feedback on Occupational Safety and Health Management among Hospital Staff Nurses in Sabah State Health Department

PubMed Central

Cheah, Whye Lian; Giloi, Nelbon; Chang, Ching Thon; Lim, Jac Fang

2012-01-01

Background: This study aimed to determine the perception and level of safety satisfaction of staff nurses with regards to Occupational Safety and Health (OSH) management practice in the Sabah Health Department, and to associate the OSH management dimensions, to Safety Satisfaction and Safety Feedback. Methods: A cross-sectional study using a validated self-administered questionnaire was conducted among randomly respondents. Results: 135 nurses responded the survey. Mean (SD) score for each dimension ranged from 1.70 ± 0.68–4.04 ± 0.65, with Training and Competence dimension (mean [SD], 4.04 ± 0.65) had the highest while Safety Incidence was the least score (mean [SD], 1.70 ± 0.68). Both mean (SD) scores for Safety Satisfaction and Safety Feedback was high, 3.28 ± 0.51 and 3.57 ± 0.73, respectively. Pearson’s correlation analysis indicated that all OSH dimensions had significant correlation with Safety Satisfaction and Safety Feedback (r coefficient ranged from 0.176–0.512) except for Safety Incidence. Conclusion: The overall perception of OSH management was rather low. Significant correlation between Safety Satisfaction and Safety Feedback and several dimensions, suggest that each organization to put in place the leaders who have appropriate leadership and supervisory skills and committed in providing staff training to improve staff’s competency in OSH practice. In addition, clear goals, rules, and reporting system will help the organization to implement proper OSH management practice. PMID:23610550

Managing risk in healthcare: understanding your safety culture using the Manchester Patient Safety Framework (MaPSaF).

PubMed

Parker, Dianne

2009-03-01

To provide sufficient information about the Manchester Patient Safety Framework (MaPSaF) to allow healthcare professionals to assess its potential usefulness. The assessment of safety culture is an important aspect of risk management, and one in which there is increasing interest among healthcare organizations. Manchester Patient Safety Framework offers a theory-based framework for assessing safety culture, designed specifically for use in the NHS. The framework covers multiple dimensions of safety culture, and five levels of safety culture development. This allows the generation of a profile of an organization's safety culture in terms of areas of relative strength and challenge, which can be used to identify focus issues for change and improvement. Manchester Patient Safety Framework provides a useful method for engaging healthcare professionals in assessing and improving the safety culture in their organization, as part of a programme of risk management.

CSHM: Web-based safety and health monitoring system for construction management.

PubMed

Cheung, Sai On; Cheung, Kevin K W; Suen, Henry C H

2004-01-01

This paper describes a web-based system for monitoring and assessing construction safety and health performance, entitled the Construction Safety and Health Monitoring (CSHM) system. The design and development of CSHM is an integration of internet and database systems, with the intent to create a total automated safety and health management tool. A list of safety and health performance parameters was devised for the management of safety and health in construction. A conceptual framework of the four key components of CSHM is presented: (a) Web-based Interface (templates); (b) Knowledge Base; (c) Output Data; and (d) Benchmark Group. The combined effect of these components results in a system that enables speedy performance assessment of safety and health activities on construction sites. With the CSHM's built-in functions, important management decisions can theoretically be made and corrective actions can be taken before potential hazards turn into fatal or injurious occupational accidents. As such, the CSHM system will accelerate the monitoring and assessing of performance safety and health management tasks.

Health and Safety Management for Small-scale Methane Fermentation Facilities

NASA Astrophysics Data System (ADS)

Yamaoka, Masaru; Yuyama, Yoshito; Nakamura, Masato; Oritate, Fumiko

In this study, we considered health and safety management for small-scale methane fermentation facilities that treat 2-5 ton of biomass daily based on several years operation experience with an approximate capacity of 5 t·d-1. We also took account of existing knowledge, related laws and regulations. There are no qualifications or licenses required for management and operation of small-scale methane fermentation facilities, even though rural sewerage facilities with a relative similar function are required to obtain a legitimate license. Therefore, there are wide variations in health and safety consciousness of the operators of small-scale methane fermentation facilities. The industrial safety and health laws are not applied to the operation of small-scale methane fermentation facilities. However, in order to safely operate a small-scale methane fermentation facility, the occupational safety and health management system that the law recommends should be applied. The aims of this paper are to clarify the risk factors in small-scale methane fermentation facilities and encourage planning, design and operation of facilities based on health and safety management.

National Machine Guarding Program: Part 2. Safety management in small metal fabrication enterprises.

PubMed

Parker, David L; Yamin, Samuel C; Brosseau, Lisa M; Xi, Min; Gordon, Robert; Most, Ivan G; Stanley, Rodney

2015-11-01

Small manufacturing businesses often lack important safety programs. Many reasons have been set forth on why this has remained a persistent problem. The National Machine Guarding Program (NMGP) was a nationwide intervention conducted in partnership with two workers' compensation insurers. Insurance safety consultants collected baseline data in 221 business using a 33-question safety management audit. Audits were completed during an interview with the business owner or manager. Most measures of safety management improved with an increasing number of employees. This trend was particularly strong for lockout/tagout. However, size was only significant for businesses without a safety committee. Establishments with a safety committee scored higher (55% vs. 36%) on the safety management audit compared with those lacking a committee (P < 0.0001). Critical safety management programs were frequently absent. A safety committee appears to be a more important factor than business size in accounting for differences in outcome measures. © 2015 The Authors. American Journal of Industrial Medicine Published by Wiley Periodicals, Inc.

30 CFR 585.810 - What must I include in my Safety Management System?

Code of Federal Regulations, 2013 CFR

2013-07-01

..., COPs and GAPs Safety Management Systems § 585.810 What must I include in my Safety Management System? You must submit a description of the Safety Management System you will use with your COP (provided...

30 CFR 585.810 - What must I include in my Safety Management System?

Code of Federal Regulations, 2014 CFR

2014-07-01

..., COPs and GAPs Safety Management Systems § 585.810 What must I include in my Safety Management System? You must submit a description of the Safety Management System you will use with your COP (provided...

30 CFR 585.810 - What must I include in my Safety Management System?

Code of Federal Regulations, 2012 CFR

2012-07-01

..., COPs and GAPs Safety Management Systems § 585.810 What must I include in my Safety Management System? You must submit a description of the Safety Management System you will use with your COP (provided...

Towards integrated hygiene and food safety management systems: the Hygieneomic approach.

PubMed

Armstrong, G D

1999-09-15

Integrated hygiene and food safety management systems in food production can give rise to exceptional improvements in food safety performance, but require high level commitment and full functional involvement. A new approach, named hygieneomics, has been developed to assist management in their introduction of hygiene and food safety systems. For an effective introduction, the management systems must be designed to fit with the current generational state of an organisation. There are, broadly speaking, four generational states of an organisation in their approach to food safety. They comprise: (i) rules setting; (ii) ensuring compliance; (iii) individual commitment; (iv) interdependent action. In order to set up an effective integrated hygiene and food safety management system a number of key managerial requirements are necessary. The most important ones are: (a) management systems must integrate the activities of key functions from research and development through to supply chain and all functions need to be involved; (b) there is a critical role for the senior executive, in communicating policy and standards; (c) responsibilities must be clearly defined, and it should be clear that food safety is a line management responsibility not to be delegated to technical or quality personnel; (d) a thorough and effective multi-level audit approach is necessary; (e) key activities in the system are HACCP and risk management, but it is stressed that these are ongoing management activities, not once-off paper generating exercises; and (f) executive management board level review is necessary of audit results, measurements, status and business benefits.

Economic Techniques of Occupational Health and Safety Management

NASA Astrophysics Data System (ADS)

Sidorov, Aleksandr I.; Beregovaya, Irina B.; Khanzhina, Olga A.

2016-10-01

The article deals with the issues on economic techniques of occupational health and safety management. Authors’ definition of safety management is given. It is represented as a task-oriented process to identify, establish and maintain such a state of work environment in which there are no possible effects of hazardous and harmful factors, or their influence does not go beyond certain limits. It was noted that management techniques that are the part of the control mechanism, are divided into administrative, organizational and administrative, social and psychological and economic. The economic management techniques are proposed to be classified depending on the management subject, management object, in relation to an enterprise environment, depending on a control action. Technoeconomic study, feasibility study, planning, financial incentives, preferential crediting of enterprises, pricing, profit sharing and equity, preferential tax treatment for enterprises, economic regulations and standards setting have been distinguished as economic techniques.

76 FR 35130 - Pipeline Safety: Control Room Management/Human Factors

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-16

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Parts...: Control Room Management/Human Factors AGENCY: Pipeline and Hazardous Materials Safety Administration... safety standards, risk assessments, and safety policies for natural gas pipelines and for hazardous...

A study for safety and health management problem of semiconductor industry in Taiwan.

PubMed

Chao, Chin-Jung; Wang, Hui-Ming; Feng, Wen-Yang; Tseng, Feng-Yi

2008-12-01

The main purpose of this study is to discuss and explore the safety and health management in semiconductor industry. The researcher practically investigates and interviews the input, process and output of the safety and health management of semiconductor industry by using the questionnaires and the interview method which is developed according to the framework of the OHSAS 18001. The result shows that there are six important factors for the safety and health management in Taiwan semiconductor industry. 1. The company should make employee clearly understand the safety and health laws and standards. 2. The company should make the safety and health management policy known to the public. 3. The company should put emphasis on the pursuance of the safety and health management laws. 4. The company should prevent the accidents. 5. The safety and health message should be communicated sufficiently. 6. The company should consider safety and health norm completely.

Total Quality Management and the System Safety Secretary

NASA Technical Reports Server (NTRS)

Elliott, Suzan E.

1993-01-01

The system safety secretary is a valuable member of the system safety team. As downsizing occurs to meet economic constraints, the Total Quality Management (TQM) approach is frequently adopted as a formula for success and, in some cases, for survival.

The influence of environmental conditions on safety management in hospitals: a qualitative study.

PubMed

Alingh, Carien W; van Wijngaarden, Jeroen D H; Huijsman, Robbert; Paauwe, Jaap

2018-05-02

Hospitals are confronted with increasing safety demands from a diverse set of stakeholders, including governmental organisations, professional associations, health insurance companies, patient associations and the media. However, little is known about the effects of these institutional and competitive pressures on hospital safety management. Previous research has shown that organisations generally shape their safety management approach along the lines of control- or commitment-based management. Using a heuristic framework, based on the contextually-based human resource theory, we analysed how environmental pressures affect the safety management approach used by hospitals. A qualitative study was conducted into hospital care in the Netherlands. Five hospitals were selected for participation, based on organisational characteristics as well as variation in their reputation for patient safety. We interviewed hospital managers and staff with a central role in safety management. A total of 43 semi-structured interviews were conducted with 48 respondents. The heuristic framework was used as an initial model for analysing the data, though new codes emerged from the data as well. In order to ensure safe care delivery, institutional and competitive stakeholders often impose detailed safety requirements, strong forces for compliance and growing demands for accountability. As a consequence, hospitals experience a decrease in the room to manoeuvre. Hence, organisations increasingly choose a control-based management approach to make sure that safety demands are met. In contrast, in case of more abstract safety demands and an organisational culture which favours patient safety, hospitals generally experience more leeway. This often results in a stronger focus on commitment-based management. Institutional and competitive conditions as well as strategic choices that hospitals make have resulted in various combinations of control- and commitment-based safety management. A balanced

Safety management and risk assessment in chemical laboratories.

PubMed

Marendaz, Jean-Luc; Friedrich, Kirstin; Meyer, Thierry

2011-01-01

The present paper highlights a new safety management program, MICE (Management, Information, Control and Emergency), which has been specifically adapted for the academic environment. The process starts with an exhaustive hazard inventory supported by a platform assembling specific hazards encountered in laboratories and their subsequent classification. A proof of concept is given by a series of implementations in the domain of chemistry targeting workplace health protection. The methodology is expressed through three examples to illustrate how the MICE program can be used to address safety concerns regarding chemicals, strong magnetic fields and nanoparticles in research laboratories. A comprehensive chemical management program is also depicted.

Information systems in food safety management.

PubMed

McMeekin, T A; Baranyi, J; Bowman, J; Dalgaard, P; Kirk, M; Ross, T; Schmid, S; Zwietering, M H

2006-12-01

Information systems are concerned with data capture, storage, analysis and retrieval. In the context of food safety management they are vital to assist decision making in a short time frame, potentially allowing decisions to be made and practices to be actioned in real time. Databases with information on microorganisms pertinent to the identification of foodborne pathogens, response of microbial populations to the environment and characteristics of foods and processing conditions are the cornerstone of food safety management systems. Such databases find application in: Identifying pathogens in food at the genus or species level using applied systematics in automated ways. Identifying pathogens below the species level by molecular subtyping, an approach successfully applied in epidemiological investigations of foodborne disease and the basis for national surveillance programs. Predictive modelling software, such as the Pathogen Modeling Program and Growth Predictor (that took over the main functions of Food Micromodel) the raw data of which were combined as the genesis of an international web based searchable database (ComBase). Expert systems combining databases on microbial characteristics, food composition and processing information with the resulting "pattern match" indicating problems that may arise from changes in product formulation or processing conditions. Computer software packages to aid the practical application of HACCP and risk assessment and decision trees to bring logical sequences to establishing and modifying food safety management practices. In addition there are many other uses of information systems that benefit food safety more globally, including: Rapid dissemination of information on foodborne disease outbreaks via websites or list servers carrying commentary from many sources, including the press and interest groups, on the reasons for and consequences of foodborne disease incidents. Active surveillance networks allowing rapid dissemination

Research on Occupational Safety, Health Management and Risk Control Technology in Coal Mines.

PubMed

Zhou, Lu-Jie; Cao, Qing-Gui; Yu, Kai; Wang, Lin-Lin; Wang, Hai-Bin

2018-04-26

This paper studies the occupational safety and health management methods as well as risk control technology associated with the coal mining industry, including daily management of occupational safety and health, identification and assessment of risks, early warning and dynamic monitoring of risks, etc.; also, a B/S mode software (Geting Coal Mine, Jining, Shandong, China), i.e., Coal Mine Occupational Safety and Health Management and Risk Control System, is developed to attain the aforementioned objectives, namely promoting the coal mine occupational safety and health management based on early warning and dynamic monitoring of risks. Furthermore, the practical effectiveness and the associated pattern for applying this software package to coal mining is analyzed. The study indicates that the presently developed coal mine occupational safety and health management and risk control technology and the associated software can support the occupational safety and health management efforts in coal mines in a standardized and effective manner. It can also control the accident risks scientifically and effectively; its effective implementation can further improve the coal mine occupational safety and health management mechanism, and further enhance the risk management approaches. Besides, its implementation indicates that the occupational safety and health management and risk control technology has been established based on a benign cycle involving dynamic feedback and scientific development, which can provide a reliable assurance to the safe operation of coal mines.

Research on Occupational Safety, Health Management and Risk Control Technology in Coal Mines

PubMed Central

Zhou, Lu-jie; Cao, Qing-gui; Yu, Kai; Wang, Lin-lin; Wang, Hai-bin

2018-01-01

This paper studies the occupational safety and health management methods as well as risk control technology associated with the coal mining industry, including daily management of occupational safety and health, identification and assessment of risks, early warning and dynamic monitoring of risks, etc.; also, a B/S mode software (Geting Coal Mine, Jining, Shandong, China), i.e., Coal Mine Occupational Safety and Health Management and Risk Control System, is developed to attain the aforementioned objectives, namely promoting the coal mine occupational safety and health management based on early warning and dynamic monitoring of risks. Furthermore, the practical effectiveness and the associated pattern for applying this software package to coal mining is analyzed. The study indicates that the presently developed coal mine occupational safety and health management and risk control technology and the associated software can support the occupational safety and health management efforts in coal mines in a standardized and effective manner. It can also control the accident risks scientifically and effectively; its effective implementation can further improve the coal mine occupational safety and health management mechanism, and further enhance the risk management approaches. Besides, its implementation indicates that the occupational safety and health management and risk control technology has been established based on a benign cycle involving dynamic feedback and scientific development, which can provide a reliable assurance to the safe operation of coal mines. PMID:29701715

23 CFR 973.212 - Indian lands safety management system (SMS).

Code of Federal Regulations, 2010 CFR

2010-04-01

... implementation of public information and education activities on safety needs, programs, and countermeasures... 23 Highways 1 2010-04-01 2010-04-01 false Indian lands safety management system (SMS). 973.212... HIGHWAYS MANAGEMENT SYSTEMS PERTAINING TO THE BUREAU OF INDIAN AFFAIRS AND THE INDIAN RESERVATION ROADS...

Major accident prevention through applying safety knowledge management approach.

PubMed

Kalatpour, Omid

2016-01-01

Many scattered resources of knowledge are available to use for chemical accident prevention purposes. The common approach to management process safety, including using databases and referring to the available knowledge has some drawbacks. The main goal of this article was to devise a new emerged knowledge base (KB) for the chemical accident prevention domain. The scattered sources of safety knowledge were identified and scanned. Then, the collected knowledge was formalized through a computerized program. The Protégé software was used to formalize and represent the stored safety knowledge. The domain knowledge retrieved as well as data and information. This optimized approach improved safety and health knowledge management (KM) process and resolved some typical problems in the KM process. Upgrading the traditional resources of safety databases into the KBs can improve the interaction between the users and knowledge repository.

The Safety Attitudes of Senior Managers in the Chinese Coal Industry

PubMed Central

Zhang, Jiangshi; Chen, Na; Fu, Gui; Yan, Mingwei; Kim, Young-Chan

2016-01-01

Introduction: Senior managers’ attitudes towards safety are very important regarding the safety practices in an organization. The study is to describe the current situation of senior managers′ attitudes towards safety in the Chinese coal industry. Method: We evaluated the changing trends as well as the reasons for these changes in the Chinese coal industry in 2009 and in 2014 with 168 senior manager samples from large Chinese state-owned coal enterprises. Evaluations of 15 safety concepts were performed by means of a questionnaire. Results and Conclusions: Results indicate that, in 2014, three concepts were at a very high level (mean > 4.5), and six were at a relatively high level (4.5 > mean > 4.0). Analyses of changing trends revealed that nine concepts improved significantly, while four greatly declined in 2014 compared to those in 2009. The data reported here suggest that the reasons for the significant improvement with respect to the nine concepts include the improvement in social and legal environments, the improvement of the culture of social safety, workers′ safety demands being met, and scientific and technical advances in the coal industry. The decline of the four concepts seemed to be caused by a poor awareness of managers in the coal industry that safety creates economic benefits, insufficient information on safety, inadequate attention to the development of a safety culture and safety management methods, and safety organizations and workers′ unions not playing their role effectively. Practical Applications: We therefore recommend strengthening the evidence that safety creates economic benefits, providing incentives for employees to encourage their participation in safety management, and paying more attention to the prevention of accidents in coal mines via safety organizations and unions. These results can provide guidelines for workers, industrialists, and government regarding occupational safety in the whole coal industry. PMID:27869654

National machine guarding program: Part 2. Safety management in small metal fabrication enterprises

PubMed Central

Yamin, Samuel C.; Brosseau, Lisa M.; Xi, Min; Gordon, Robert; Most, Ivan G.; Stanley, Rodney

2015-01-01

Background Small manufacturing businesses often lack important safety programs. Many reasons have been set forth on why this has remained a persistent problem. Methods The National Machine Guarding Program (NMGP) was a nationwide intervention conducted in partnership with two workers' compensation insurers. Insurance safety consultants collected baseline data in 221 business using a 33‐question safety management audit. Audits were completed during an interview with the business owner or manager. Results Most measures of safety management improved with an increasing number of employees. This trend was particularly strong for lockout/tagout. However, size was only significant for businesses without a safety committee. Establishments with a safety committee scored higher (55% vs. 36%) on the safety management audit compared with those lacking a committee (P < 0.0001). Conclusions Critical safety management programs were frequently absent. A safety committee appears to be a more important factor than business size in accounting for differences in outcome measures. Am. J. Ind. Med. 58:1184–1193, 2015. © 2015 The Authors. American Journal of Industrial Medicine Published by Wiley Periodicals, Inc. PMID:26345591

Procurement and Supply Management System for MDR-TB in Nigeria: Are the Early Warning Targets for Drug Stock Outs and Over Stock of Drugs Being Achieved?

PubMed

Jatau, Bolajoko; Avong, Yohanna; Ogundahunsi, Olumide; Shah, Safieh; Tayler Smith, Katherine; Van den Bergh, Rafael; Zachariah, Rony; van Griensven, Johan; Ekong, Ernest; Dakum, Patrick

2015-01-01

The World Health Organisation (WHO) introduced the twelve early warning indicators for monitoring and evaluating drug Procurement and Supply management (PSM) systems, intended to prevent drug stock-outs and overstocking. Nigeria--one of the high Multi Drug Resistant Tuberculosis (MDR-TB) burden countries, scaled-up treatment in 2012 with the concurrent implementation of a PSM system. We evaluated how well this system functioned using the WHO indicators, including all seven MDR-TB treatment centres in the country that were functional throughout 2013. The quantity of MDR-TB drugs ordered for 2013 matched the annual forecast and all central orders placed during the year were delivered in full and on time. Drug consumption was 81%-106% of the quantity allocated for routine consumption. Timely submission of complete inventory reports ranged from 86-100%, late submissions being 5-15 days late. Forty to 71% of treatment centres placed a drug order when stock was below the minimum level of three months. The proportion of drug orders received at the treatment centres in full and on time ranged from 29-80%, late orders being 1-19 days late. The PSM was found to be performing well in terms of forecasting and procurement of MDR-TB drugs, but there were shortcomings in drug distribution, reporting at treatment centre level and in drug order placements. Despite these gaps, there were no stock outs. These findings indicate that where it matters most, namely ensuring that no drug stock outs affect patient management, the PSM system is effective. Addressing the observed shortcomings will help to strengthen the existing PSM system in anticipation of a growing MDR-TB case burden in the country.

Safety and Mission Assurance Knowledge Management Retention: Managing Knowledge for Successful Mission Operations

NASA Technical Reports Server (NTRS)

Johnson, Teresa A.

2006-01-01

Knowledge Management is a proactive pursuit for the future success of any large organization faced with the imminent possibility that their senior managers/engineers with gained experiences and lessons learned plan to retire in the near term. Safety and Mission Assurance (S&MA) is proactively pursuing unique mechanism to ensure knowledge learned is retained and lessons learned captured and documented. Knowledge Capture Event/Activities/Management helps to provide a gateway between future retirees and our next generation of managers/engineers. S&MA hosted two Knowledge Capture Events during 2005 featuring three of its retiring fellows (Axel Larsen, Dave Whittle and Gary Johnson). The first Knowledge Capture Event February 24, 2005 focused on two Safety and Mission Assurance Safety Panels (Space Shuttle System Safety Review Panel (SSRP); Payload Safety Review Panel (PSRP) and the latter event December 15, 2005 featured lessons learned during Apollo, Skylab, and Space Shuttle which could be applicable in the newly created Crew Exploration Vehicle (CEV)/Constellation development program. Gemini, Apollo, Skylab and the Space Shuttle promised and delivered exciting human advances in space and benefits of space in people s everyday lives on earth. Johnson Space Center's Safety & Mission Assurance team work over the last 20 years has been mostly focused on operations we are now beginning the Exploration development program. S&MA will promote an atmosphere of knowledge sharing in its formal and informal cultures and work processes, and reward the open dissemination and sharing of information; we are asking "Why embrace relearning the "lessons learned" in the past?" On the Exploration program the focus will be on Design, Development, Test, & Evaluation (DDT&E); therefore, it is critical to understand the lessons from these past programs during the DDT&E phase.

33 CFR 96.240 - What functional requirements must a safety management system meet?

Code of Federal Regulations, 2010 CFR

2010-07-01

... a safety management system meet? 96.240 Section 96.240 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY VESSEL OPERATING REGULATIONS RULES FOR THE SAFE OPERATION OF VESSELS AND SAFETY MANAGEMENT SYSTEMS Company and Vessel Safety Management Systems § 96.240 What functional...

77 FR 65000 - Drug Safety and Risk Management Advisory Committee; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-24

...] Drug Safety and Risk Management Advisory Committee; Notice of Meeting AGENCY: Food and Drug...: Drug Safety and Risk Management Advisory Committee. General Function of the Committee: To provide... Use (ETASU) before CDER's Drug Safety and Risk Management Advisory Committee (DSaRM). The Agency plans...

78 FR 30929 - Drug Safety and Risk Management Advisory Committee; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-23

...] Drug Safety and Risk Management Advisory Committee; Notice of Meeting AGENCY: Food and Drug...: Drug Safety and Risk Management Advisory Committee. General Function of the Committee: To provide... (REMS) with elements to assure safe use (ETASU) before its Drug Safety and Risk Management Advisory...

76 FR 64110 - Safety and Health Management Programs for Mines

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-17

... DEPARTMENT OF LABOR Mine Safety and Health Administration RIN 1219-AB71 Safety and Health Management Programs for Mines AGENCY: Mine Safety and Health Administration, Labor. ACTION: Notice of public meetings. SUMMARY: The Mine Safety and Health Administration (MSHA) is holding a public meeting, and plans...

23 CFR 971.212 - Federal lands safety management system (SMS).

Code of Federal Regulations, 2011 CFR

2011-04-01

.... (b) The SMS may be based on the guidance in “Safety Management Systems: Good Practices for Development and Implementation.”3 3 “Safety Management Systems: Good Practices for Development and... various levels of complexity depending on the nature of the facility and/or network involved. (e) The SMS...

23 CFR 971.212 - Federal lands safety management system (SMS).

Code of Federal Regulations, 2013 CFR

2013-04-01

.... (b) The SMS may be based on the guidance in “Safety Management Systems: Good Practices for Development and Implementation.”3 3 “Safety Management Systems: Good Practices for Development and... various levels of complexity depending on the nature of the facility and/or network involved. (e) The SMS...

23 CFR 971.212 - Federal lands safety management system (SMS).

Code of Federal Regulations, 2010 CFR

2010-04-01

.... (b) The SMS may be based on the guidance in “Safety Management Systems: Good Practices for Development and Implementation.”3 3 “Safety Management Systems: Good Practices for Development and... various levels of complexity depending on the nature of the facility and/or network involved. (e) The SMS...

23 CFR 971.212 - Federal lands safety management system (SMS).

Code of Federal Regulations, 2012 CFR

2012-04-01

.... (b) The SMS may be based on the guidance in “Safety Management Systems: Good Practices for Development and Implementation.”3 3 “Safety Management Systems: Good Practices for Development and... various levels of complexity depending on the nature of the facility and/or network involved. (e) The SMS...

23 CFR 971.212 - Federal lands safety management system (SMS).

Code of Federal Regulations, 2014 CFR

2014-04-01

.... (b) The SMS may be based on the guidance in “Safety Management Systems: Good Practices for Development and Implementation.”3 3 “Safety Management Systems: Good Practices for Development and... various levels of complexity depending on the nature of the facility and/or network involved. (e) The SMS...

Safety management of a complex R and D ground operating system

NASA Technical Reports Server (NTRS)

Connors, J. F.; Maurer, R. A.

1975-01-01

A perspective on safety program management was developed for a complex R&D operating system, such as the NASA-Lewis Research Center. Using a systems approach, hazardous operations are subjected to third-party reviews by designated-area safety committees and are maintained under safety permit controls. To insure personnel alertness, emergency containment forces and employees are trained in dry-run emergency simulation exercises. The keys to real safety effectiveness are top management support and visibility of residual risks.

77 FR 75176 - Drug Safety and Risk Management Advisory Committee; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-19

...] Drug Safety and Risk Management Advisory Committee; Notice of Meeting AGENCY: Food and Drug... being rescheduled due to the postponement of the October 29-30, 2012, Drug Safety and Risk Management... Committee: Drug Safety and Risk Management Advisory Committee. General Function of the Committee: To provide...

76 FR 12300 - Safety Management System for Certificated Airports; Extension of Comment Period

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-07

...-0997; Notice No. 10-14] RIN 2120-AJ38 Safety Management System for Certificated Airports; Extension of...: Background On October 7, 2010, the FAA published Notice No. 10-14, entitled ``Safety Management System for... conclusions from the safety management systems proof of concept. The FAA anticipates making this report...

Parent Stress Management Training for Attention-Deficit/Hyperactivity Disorder

ERIC Educational Resources Information Center

Treacy, Lee; Tripp, Gail; Baird, Amanda

2005-01-01

This study assessed the effectiveness of a targeted 9-week parent stress management program (PSM) on the parenting stress, mood, family functioning, parenting style, locus of control, and perceived social support of parents of children diagnosed with DSM-IV ADHD. Sixty-three parents from 42 families were randomly assigned to 1 of 2 conditions:…

Management capacity to promote nurse workplace health and safety.

PubMed

Fang, Yaxuan; McDonald, Tracey

2018-04-01

To investigate regarding workplace health and safety factors, and to identify strategies to preserve and promote a healthy nursing workplace. Data collected using the Delphi technique with input from 41 key informants across four participant categories drawn from a Chinese university and four hospitals were thematically analysed. Most respondents agreed on the importance of nurses' health and safety, and that nurse managers should act to protect nurses, but not enough on workplace safety. Hospital policies, staff disempowerment, workload and workplace conflicts are major obstacles. The reality of Chinese nurses' workplaces is that health and safety risks abound and relate to socio-cultural expectations of women. Self-management of risks is neccessary, gaps exist in understanding of workplace risks among different nursing groups and their perceptions of the professional status, and the value of nurses' contribution to ongoing risks in the hospital workplace. The Chinese hospital system must make these changes to produce a safer working environment for nurses. This research, based in China, presents an instructive tale for all countries that need support on the types and amounts of management for nurses working at the clinical interface, and on the consequences of management neglect of relevant policies and procedures. © 2017 John Wiley & Sons Ltd.

Management commitment to safety as organizational support: relationships with non-safety outcomes in wood manufacturing employees

Treesearch

Judd H. Michael; Demetrice D. Evans; Karen J. Jansen; Joel M. Haight

2005-01-01

Employee perceptions of management commitment to safety are known to influence important safety-related outcomes. However, little work has been conducted to explore nonsafety-related outcomes resulting from a commitment to safety. Method: Employee-level outcomes critical to the effective functioning of an organization, including attitudes such as job...

Quality management and perceptions of teamwork and safety climate in European hospitals.

PubMed

Kristensen, Solvejg; Hammer, Antje; Bartels, Paul; Suñol, Rosa; Groene, Oliver; Thompson, Caroline A; Arah, Onyebuchi A; Kutaj-Wasikowska, Halina; Michel, Philippe; Wagner, Cordula

2015-12-01

This study aimed to investigate the associations of quality management systems with teamwork and safety climate, and to describe and compare differences in perceptions of teamwork climate and safety climate among clinical leaders and frontline clinicians. We used a multi-method, cross-sectional approach to collect survey data of quality management systems and perceived teamwork and safety climate. Our data analyses included descriptive and multilevel regression methods. Data on implementation of quality management system from seven European countries were evaluated including patient safety culture surveys from 3622 clinical leaders and 4903 frontline clinicians. Perceived teamwork and safety climate. Teamwork climate was reported as positive by 67% of clinical leaders and 43% of frontline clinicians. Safety climate was perceived as positive by 54% of clinical leaders and 32% of frontline clinicians. We found positive associations between implementation of quality management systems and teamwork and safety climate. Our findings, which should be placed in a broader clinical quality improvement context, point to the importance of quality management systems as a supportive structural feature for promoting teamwork and safety climate. To gain a deeper understanding of this association, further qualitative and quantitative studies using longitudinally collected data are recommended. The study also confirms that more clinical leaders than frontline clinicians have a positive perception of teamwork and safety climate. Such differences should be accounted for in daily clinical practice and when tailoring initiatives to improve teamwork and safety climate. © The Author 2015. Published by Oxford University Press in association with the International Society for Quality in Health Care; all rights reserved.

The Role of Endorectal Coil MRI in the management of patients with prostate cancer and in determining radical prostatectomy surgical margin status: A report of a single surgeon's practice

PubMed Central

Zhang, Jianqing; Loughlin, Kevin R.; Zou, Kelly H.; Haker, Steven; Tempany, Clare M.C.

2009-01-01

Objective To evaluate the role of combination of endorectal coil and external multicoil array MRI in the management of prostate cancer and predicting the surgical margin status in a single surgical practice. Materials and Methods We reviewed all patients referred by a single surgeon from January 1993 to May 2002 for staging prostate MRI prior to selecting treatment. All MRI examinations were performed using 1.5T (Signa; GE Medical Systems) with a combination of endorectal and pelvic multi-coil array. The tumor size, stage and total gland volume on MR, PSA and Gleason grade were all compared with the pathological stage and diagnosis of positive surgical margin (PSM). Result A total of 232 patients were evaluated, of which 110 underwent radical prostatectomy all performed by one surgeon (Group 1), and 122 did not (Group 2). The results showed MRI stage, PSA and age, all significantly different (P<0.001). In Group 1, the results showed a high specificity (99%) and accuracy (91%) of the MRI staging T3. Post-surgical follow up (median 4.5 years) showed 90% of men had PSA levels below 0.1ng/ml. The positive surgical margin (PSM) rate was 16%. There was no significant difference found on MR imaging between PSM group and non-PSM group. A single tumor length above 1.8cm was the cut point above which there was PSM (P=0.002). Conclusion In conclusion, the combined use of clinical data and endorectal MR imaging can help optimize patient management and selection for surgery, and in a single surgeon's practice lead to successful outcomes. PMID:17572201

Safety Management for Water Play Facilities.

ERIC Educational Resources Information Center

Thompson, Claude

1986-01-01

Modern aquatic facilities, which include wave pools, water slides, and shallow water activity play pools, have a greater potential for injuries and lawsuits than conventional swimming pools. This article outlines comprehensive safety management for such facilities, including potential accident identification and injury control planning. (MT)

[Post-marketing drug safety-risk management plan(RMP)].

PubMed

Ezaki, Asami; Hori, Akiko

2013-03-01

The Guidance for Risk Management Plan(RMP)was released by the Ministry of Health, Labour and Welfare in April 2012. The RMP consists of safety specifications, pharmacovigilance plans and risk minimization action plans. In this paper, we outline post-marketing drug safety operations in PMDA and the RMP, with examples of some anticancer drugs.

Procurement and Supply Management System for MDR-TB in Nigeria: Are the Early Warning Targets for Drug Stock Outs and Over Stock of Drugs Being Achieved?

PubMed Central

Jatau, Bolajoko; Avong, Yohanna; Ogundahunsi, Olumide; Shah, Safieh; Tayler Smith, Katherine; Van den Bergh, Rafael; Zachariah, Rony; van Griensven, Johan; Ekong, Ernest; Dakum, Patrick

2015-01-01

Background The World Health Organisation (WHO) introduced the twelve early warning indicators for monitoring and evaluating drug Procurement and Supply management (PSM) systems, intended to prevent drug stock-outs and overstocking. Nigeria- one of the high Multi Drug Resistant Tuberculosis (MDR-TB) burden countries, scaled-up treatment in 2012 with the concurrent implementation of a PSM system. Method We evaluated how well this system functioned using the WHO indicators, including all seven MDR-TB treatment centres in the country that were functional throughout 2013. Results The quantity of MDR-TB drugs ordered for 2013 matched the annual forecast and all central orders placed during the year were delivered in full and on time. Drug consumption was 81%–106% of the quantity allocated for routine consumption. Timely submission of complete inventory reports ranged from 86–100%, late submissions being 5–15 days late. Forty to 71% of treatment centres placed a drug order when stock was below the minimum level of three months. The proportion of drug orders received at the treatment centres in full and on time ranged from 29–80%, late orders being 1–19 days late. Conclusion The PSM was found to be performing well in terms of forecasting and procurement of MDR-TB drugs, but there were shortcomings in drug distribution, reporting at treatment centre level and in drug order placements. Despite these gaps, there were no stock outs. These findings indicate that where it matters most, namely ensuring that no drug stock outs affect patient management, the PSM system is effective. Addressing the observed shortcomings will help to strengthen the existing PSM system in anticipation of a growing MDR-TB case burden in the country. PMID:26098673

Design and Testing of the Safety Agenda Mobile App for Managing Health Care Managers’ Patient Safety Responsibilities

PubMed Central

Carrillo, Irene; Fernandez, Cesar; Vicente, Maria Asuncion; Guilabert, Mercedes

2016-01-01

Background Adverse events are a reality in clinical practice. Reducing the prevalence of preventable adverse events by stemming their causes requires health managers’ engagement. Objective The objective of our study was to develop an app for mobile phones and tablets that would provide managers with an overview of their responsibilities in matters of patient safety and would help them manage interventions that are expected to be carried out throughout the year. Methods The Safety Agenda Mobile App (SAMA) was designed based on standardized regulations and reviews of studies about health managers’ roles in patient safety. A total of 7 managers used a beta version of SAMA for 2 months and then they assessed and proposed improvements in its design. Their experience permitted redesigning SAMA, improving functions and navigation. A total of 74 Spanish health managers tried out the revised version of SAMA. After 4 months, their assessment was requested in a voluntary and anonymous manner. Results SAMA is an iOS app that includes 37 predefined tasks that are the responsibility of health managers. Health managers can adapt these tasks to their schedule, add new ones, and share them with their team. SAMA menus are structured in 4 main areas: information, registry, task list, and settings. Of the 74 users who tested SAMA, 64 (86%) users provided a positive assessment of SAMA characteristics and utility. Over an 11-month period, 238 users downloaded SAMA. This mobile app has obtained the AppSaludable (HealthyApp) Quality Seal. Conclusions SAMA includes a set of activities that are expected to be carried out by health managers in matters of patient safety and contributes toward improving the awareness of their responsibilities in matters of safety. PMID:27932315

75 FR 62008 - Safety Management System for Certificated Airports

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-07

.... The majority of pilot study airports indicated an existing organizational structure to manage safety... organizational structure; Identifies the lines of safety responsibility and accountability; Establishes and... understands that airport operations and organizational structures vary widely. Accordingly, the FAA would not...

49 CFR 385.321 - What failures of safety management practices disclosed by the safety audit will result in a...

Code of Federal Regulations, 2010 CFR

2010-10-01

... disclosed by the safety audit will result in a notice to a new entrant that its USDOT new entrant... MOTOR CARRIER SAFETY REGULATIONS SAFETY FITNESS PROCEDURES New Entrant Safety Assurance Program § 385.321 What failures of safety management practices disclosed by the safety audit will result in a notice...

Slovenian Experience with the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stritar, A.

Slovenia is a relatively small European country with only one operating nuclear power plant, one operating research reactor and one Central Interim Storage for Radioactive Waste from small producers. There are also a uranium mine and mill at Zirovski vrh, both in the decommissioning stage. The Slovenian Government, its public and neighboring countries are most interested in the managing of radioactive waste in the safest possible way by carefully utilizing best practices and existing human and financial resources. In order to achieve this goal the tight connection with the international community in the area of radioactive waste management is essential.more » Slovenia was among those countries involved in the process of preparation of the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management (Joint Convention) from the very beginning and was also among first ratifiers. Slovenia had prepared the first report under the Convention and took part in the first Review Meeting in November 2003. The preparation of this report was not regarded only as a fulfillment of obligation toward Joint Convention, but was considered primarily as a kind of self appraisal of the national radioactive management program. Therefore the preparation of the report primarily contributed to the improvements in the field of radioactive waste management and consequently enhanced the safety of our public. For the preparation of the second report for the review meeting in 2006 it was decided to follow the structure of the first report. Only updates were introduced and eventual changes in the area of radioactive waste management were reflected. (authors)« less

Expanding the scope of practice for radiology managers: radiation safety duties.

PubMed

Orders, Amy B; Wright, Donna

2003-01-01

In addition to financial responsibilities and patient care duties, many medical facilities also expect radiology department managers to wear "safety" hats and complete fundamental quality control/quality assurance, conduct routine safety surveillance in the department, and to meet regulatory demands in the workplace. All managers influence continuous quality improvement initiatives, from effective utilization of resource and staffing allocations, to efficacy of patient scheduling tactics. It is critically important to understand continuous quality improvement (CQI) and its relationship with the radiology manager, specifically quality assurance/quality control in routine work, as these are the fundamentals of institutional safety, including radiation safety. When an institution applies for a registration for radiation-producing devices or a license for the use of radioactive materials, the permit granting body has specific requirements, policies and procedures that must be satisfied in order to be granted a permit and to maintain it continuously. In the 32 U.S. Agreement states, which are states that have radiation safety programs equivalent to the Nuclear Regulatory Commission programs, individual facilities apply for permits through the local governing body of radiation protection. Other states are directly licensed by the Nuclear Regulatory Commission and associated regulatory entities. These regulatory agencies grant permits, set conditions for use in accordance with state and federal laws, monitor and enforce radiation safety activities, and audit facilities for compliance with their regulations. Every radiology department and associated areas of radiation use are subject to inspection and enforcement policies in order to ensure safety of equipment and personnel. In today's business practice, department managers or chief technologists may actively participate in the duties associated with institutional radiation safety, especially in smaller institutions, while

33 CFR 96.250 - What documents and reports must a safety management system have?

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Safety management system document and data maintenance (1) Procedures which establish and maintain control of all documents and data relevant to the safety management system. (2) Documents are available at... safety management system have? 96.250 Section 96.250 Navigation and Navigable Waters COAST GUARD...

National Ignition Facility Construction Safety Management Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Warner, B.E.

2000-02-01

An accident occurred at the NIF construction site on January 13, 2000, in which a worker sustained a serious injury when a 42-inch-diameter duct fell during installation. Following the accident, NIF Project Management chartered two review teams: (1) an Incident Analysis Team to independently assess the direct and root causes of the accident, and (2) a Management Review Team to review the roles and responsibilities of the line, support, and construction management organizations involved. This report provides a discussion of the information gathered by the Management Review Team and provides a list of observations and recommendations based on an analysismore » of the information. The Management Review Team includes senior managers who represent several Directorates within LLNL and DOE OAK: Dick Billia representing Engineering; Dave Leary representing Business Services and Public Affairs; Jim Jackson representing Hazards Control; Chuck Taylor representing DOE OAK; Arnie Clobes representing the ICF/NIF Program; and Jon Yatabe and Bruce Warner (Chairperson) representing the NIF Project. The attached letter from the NIF Project Manager, Ed Moses, to the Management Review Team contains the team's Charter. The team was asked to evaluate the effectiveness of the line management and its supporting safety functions in managing safety during NIF construction. The evaluation was to include the current conventional facility construction, which is 85% complete, and upcoming activities such as Beampath Infrastructure System installation, which will begin in the next six months and which represents a significant amount of work over the next two to three years. The remainder of this document describes the Management Review Team's review process (Section 2), its observations gathered during the review (Section 3), and its recommendations to the NIF Project Manager based on those observations (Section 4).« less

Management of radioactive material safety programs at medical facilities. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Camper, L.W.; Schlueter, J.; Woods, S.

A Task Force, comprising eight US Nuclear Regulatory Commission and two Agreement State program staff members, developed the guidance contained in this report. This report describes a systematic approach for effectively managing radiation safety programs at medical facilities. This is accomplished by defining and emphasizing the roles of an institution`s executive management, radiation safety committee, and radiation safety officer. Various aspects of program management are discussed and guidance is offered on selecting the radiation safety officer, determining adequate resources for the program, using such contractual services as consultants and service companies, conducting audits, and establishing the roles of authorized usersmore » and supervised individuals; NRC`s reporting and notification requirements are discussed, and a general description is given of how NRC`s licensing, inspection and enforcement programs work.« less

23 CFR 630.1106 - Policy and procedures for work zone safety management.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false Policy and procedures for work zone safety management... Policy and procedures for work zone safety management. (a) Each agency's policy and processes, procedures... established in accordance with 23 CFR 630.1006, shall include the consideration and management of road user...

Safety management of Ethernet broadband access based on VLAN aggregation

NASA Astrophysics Data System (ADS)

Wang, Li

2004-04-01

With broadband access network development, the Ethernet technology is more and more applied access network now. It is different from the private network -LAN. The differences lie in four points: customer management, safety management, service management and count-fee management. This paper mainly discusses the safety management related questions. Safety management means that the access network must secure the customer data safety, isolate the broad message which brings the customer private information, such as ARP, DHCP, and protect key equipment from attack. Virtue LAN (VLAN) technology can restrict network broadcast flow. We can config each customer port with a VLAN, so each customer is isolated with others. The IP address bound with VLAN ID can be routed rightly. But this technology brings another question: IP address shortage. VLAN aggregation technology can solve this problem well. Such a mechanism provides several advantages over traditional IPv4 addressing architectures employed in large switched LANs today. With VLAN aggregation technology, we introduce the notion of sub-VLANs and super-VLANs, a much more optimal approach to IP addressing can be realized. This paper will expatiate the VLAN aggregation model and its implementation in Ethernet access network. It is obvious that the customers in different sub-VLANs can not communication to each other because the ARP packet is isolated. Proxy ARP can enable the communication among them. This paper will also expatiate the proxy ARP model and its implementation in Ethernet access network.

Safety management of an underground-based gravitational wave telescope: KAGRA

NASA Astrophysics Data System (ADS)

Ohishi, Naoko; Miyoki, Shinji; Uchiyama, Takashi; Miyakawa, Osamu; Ohashi, Masatake

2014-08-01

KAGRA is a unique gravitational wave telescope with its location underground and use of cryogenic mirrors. Safety management plays an important role for secure development and operation of such a unique and large facility. Based on relevant law in Japan, Labor Standard Act and Industrial Safety and Health Law, various countermeasures are mandated to avoid foreseeable accidents and diseases. In addition to the usual safety management of hazardous materials, such as cranes, organic solvents, lasers, there are specific safety issues in the tunnel. Prevention of collapse, flood, and fire accidents are the most critical issues for the underground facility. Ventilation is also important for prevention of air pollution by carbon monoxide, carbon dioxide, organic solvents and radon. Oxygen deficiency should also be prevented.

30 CFR 585.811 - When must I follow my Safety Management System?

Code of Federal Regulations, 2013 CFR

2013-07-01

..., COPs and GAPs Safety Management Systems § 585.811 When must I follow my Safety Management System? Your... COP, SAP, or GAP. You must conduct all activities described in your approved COP, SAP, or GAP in...

30 CFR 585.811 - When must I follow my Safety Management System?

Code of Federal Regulations, 2014 CFR

2014-07-01

..., COPs and GAPs Safety Management Systems § 585.811 When must I follow my Safety Management System? Your... COP, SAP, or GAP. You must conduct all activities described in your approved COP, SAP, or GAP in...

30 CFR 585.811 - When must I follow my Safety Management System?

Code of Federal Regulations, 2012 CFR

2012-07-01

..., COPs and GAPs Safety Management Systems § 585.811 When must I follow my Safety Management System? Your... COP, SAP, or GAP. You must conduct all activities described in your approved COP, SAP, or GAP in...

Mental models of safety: do managers and employees see eye to eye?

PubMed

Prussia, Gregory E; Brown, Karen A; Willis, P Geoff

2003-01-01

Disagreements between managers and employees about the causes of accidents and unsafe work behaviors can lead to serious workplace conflicts and distract organizations from the important work of establishing positive safety climate and reducing the incidence of accidents. In this study, the authors examine a model for predicting safe work behaviors and establish the model's consistency across managers and employees in a steel plant setting. Using the model previously described by Brown, Willis, and Prussia (2000), the authors found that when variables influencing safety are considered within a framework of safe work behaviors, managers and employees share a similar mental model. The study then contrasts employees' and managers' specific attributional perceptions. Findings from these more fine-grained analyses suggest the two groups differ in several respects about individual constructs. Most notable were contrasts in attributions based on their perceptions of safety climate. When perceived climate is poor, managers believe employees are responsible and employees believe managers are responsible for workplace safety. However, as perceived safety climate improves, managers and employees converge in their perceptions of who is responsible for safety. It can be concluded from this study that in a highly interdependent work environment, such as a steel mill, where high system reliability is essential and members possess substantial experience working together, managers and employees will share general mental models about the factors that contribute to unsafe behaviors, and, ultimately, to workplace accidents. It is possible that organizations not as tightly coupled as steel mills can use such organizations as benchmarks, seeking ways to create a shared understanding of factors that contribute to a safe work environment. Part of this improvement effort should focus on advancing organizational safety climate. As climate improves, managers and employees are likely to agree

Safety management and public spaces: restoring balance.

PubMed

Ball, David J; Ball-King, Laurence

2013-05-01

Since 2000, the reputation of health and safety in the United Kingdom has been tarnished, so much so that it has become the subject of both a media circus and a government inquiry. This not only threatens the worthy goals of health and safety, but also impacts upon the associated tool of risk assessment itself such that "risk assessment" is increasingly seen by the public at large as a term inviting ridicule, even abuse. The main thrust of the government's examination of health and safety has been its concern that safety requirements were placing a disproportionate burden on business. However, there is another source of discontent, which is public chagrin over the impact of injury control measures upon life beyond the conventional workplace, in particular upon the public spaces that people frequent in their leisure time and on the activities they engage in there. This article provides a perspective on this second dimension of the crisis in confidence. It describes how many U.K. agencies with responsibilities for a wide portfolio of public amenities ranging from the provision of play spaces for the young to the management of publicly accessible countryside, the maintenance of urban and rural trees, the stewardship of sites of cultural heritage, and the pursuit of outdoor educational activities have responded to some conflicts posed to their services by the new safety culture. It concludes with a discussion of implications for the management of public space and for risk assessment itself. © 2012 Society for Risk Analysis.

Evolution from safety management system (SMS) to HSE MS: Incorporating health aspects into the HSE management system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jong, G. de

1996-12-31

There is increasing recognition within the E&P industry that protection and promotion of the health of people at work is more than taking care of individual health. It is an organizational issue which can be managed using the same principles as for safety and environment. The synergy`s with safety and environmental management provide the link with the management system. However line managers need to under the critical Health issues: what are they are they relevant? How do we manage them? what are the standards? What are the management tools to be used? How do we monitor performance? What is themore » role of the line? What is the role of the health advisers? What training and competencies are needed for health management? What are the benefits? These questions have to be clarified before acceptance can be achieved for full integration of Health aspects into the HSE Management System. Health Risk Assessment was developed as a tool for systematic identification and assessment of health hazards and risks. It specifies the need for and type of controls and recovery measures, which can subsequently be incorporated in HSE Management System and HSE Cases. Our experience to date indicates that Health can successfully be integrated in HSE Management Systems and HSE Cases by using the same principles as developed for Safety Management Systems and Safety Cases. There are still many problems which need to be addressed but the methodology used appears to be sound and will eventually enhance line management understanding of the health management aspects relevant to the E&P Industry.« less

Safety evaluation of access management policies and techniques, TechBrief

DOT National Transportation Integrated Search

2015-08-01

Access management is the process that provides (or manages) access to land development while simultaneously preserving the flow of traffic on the surrounding road network for safety, capacity, and speed. Access management provides important benefits ...

Engineered nanomaterials: toward effective safety management in research laboratories.

PubMed

Groso, Amela; Petri-Fink, Alke; Rothen-Rutishauser, Barbara; Hofmann, Heinrich; Meyer, Thierry

2016-03-15

It is still unknown which types of nanomaterials and associated doses represent an actual danger to humans and environment. Meanwhile, there is consensus on applying the precautionary principle to these novel materials until more information is available. To deal with the rapid evolution of research, including the fast turnover of collaborators, a user-friendly and easy-to-apply risk assessment tool offering adequate preventive and protective measures has to be provided. Based on new information concerning the hazards of engineered nanomaterials, we improved a previously developed risk assessment tool by following a simple scheme to gain in efficiency. In the first step, using a logical decision tree, one of the three hazard levels, from H1 to H3, is assigned to the nanomaterial. Using a combination of decision trees and matrices, the second step links the hazard with the emission and exposure potential to assign one of the three nanorisk levels (Nano 3 highest risk; Nano 1 lowest risk) to the activity. These operations are repeated at each process step, leading to the laboratory classification. The third step provides detailed preventive and protective measures for the determined level of nanorisk. We developed an adapted simple and intuitive method for nanomaterial risk management in research laboratories. It allows classifying the nanoactivities into three levels, additionally proposing concrete preventive and protective measures and associated actions. This method is a valuable tool for all the participants in nanomaterial safety. The users experience an essential learning opportunity and increase their safety awareness. Laboratory managers have a reliable tool to obtain an overview of the operations involving nanomaterials in their laboratories; this is essential, as they are responsible for the employee safety, but are sometimes unaware of the works performed. Bringing this risk to a three-band scale (like other types of risks such as biological, radiation

Relational approach in managing construction project safety: a social capital perspective.

PubMed

Koh, Tas Yong; Rowlinson, Steve

2012-09-01

Existing initiatives in the management of construction project safety are largely based on normative compliance and error prevention, a risk management approach. Although advantageous, these approaches are not wholly successful in further lowering accident rates. A major limitation lies with the approaches' lack of emphasis on the social and team processes inherent in construction project settings. We advance the enquiry by invoking the concept of social capital and project organisational processes, and their impacts on project safety performance. Because social capital is a primordial concept and affects project participants' interactions, its impact on project safety performance is hypothesised to be indirect, i.e. the impact of social capital on safety performance is mediated by organisational processes in adaptation and cooperation. A questionnaire survey was conducted within Hong Kong construction industry to test the hypotheses. 376 usable responses were received and used for analyses. The results reveal that, while the structural dimension is not significant, the mediational thesis is generally supported with the cognitive and relational dimensions affecting project participants' adaptation and cooperation, and the latter two processes affect safety performance. However, the cognitive dimension also directly affects safety performance. The implications of these results for project safety management are discussed. Copyright © 2011 Elsevier Ltd. All rights reserved.

Spent Nuclear Fuel (SNF) project Integrated Safety Management System phase I and II Verification Review Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

CARTER, R.P.

1999-11-19

The U.S. Department of Energy (DOE) commits to accomplishing its mission safely. To ensure this objective is met, DOE issued DOE P 450.4, Safety Management System Policy, and incorporated safety management into the DOE Acquisition Regulations ([DEAR] 48 CFR 970.5204-2 and 90.5204-78). Integrated Safety Management (ISM) requires contractors to integrate safety into management and work practices at all levels so that missions are achieved while protecting the public, the worker, and the environment. The contractor is required to describe the Integrated Safety Management System (ISMS) to be used to implement the safety performance objective.

77 FR 34051 - Drug Safety and Risk Management Advisory Committee; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-08

...] Drug Safety and Risk Management Advisory Committee; Notice of Meeting AGENCY: Food and Drug...: Drug Safety and Risk Management Advisory Committee. General Function of the Committee: To provide... comments to http://www.regulations.gov . Submit written comments to the Division of Dockets Management (HFA...

Bridging the Divide between Safety and Risk Management for your Project or Program

NASA Technical Reports Server (NTRS)

Lutomski, Mike

2005-01-01

This presentation will bridge the divide between these separate but overlapping disciplines and help explain how to use Risk Management as an effective management decision support tool that includes safety. Risk Management is an over arching communication tool used by management to prioritize and effectively mitigate potential problems before they concur. Risk Management encompasses every kind of potential problem that can occur on a program or project. Some of these are safety issues such as hazards that have a specific likelihood and consequence that need to be controlled and included to show an integrated picture of accepted) mitigated, and residual risk. Integrating safety and other assurance disciplines is paramount to accurately representing a program s or projects risk posture. Risk is made up of several components such as technical) cost, schedule, or supportability. Safety should also be a consideration for every risk. The safety component can also have an impact on the technical, cost, and schedule aspect of a given risk. The current formats used for communication of safety and risk issues are not consistent or integrated. The presentation will explore the history of these disciplines, current work to integrate them, and suggestions for integration for the future.

Traffic and safety management needs in Virginia.

DOT National Transportation Integrated Search

1979-01-01

A survey questionnaire was developed to identify traffic operations and safety management needs in Virginia. Form A of the questionnaire was mailed to 79 traffic engineering practitioners throughout Virginia and Form B was mailed to 78 law enforcemen...

75 FR 57898 - NIST Blue Ribbon Commission on Management and Safety-II

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-23

... DEPARTMENT OF COMMERCE National Institute of Standards and Technology NIST Blue Ribbon Commission... Commerce. ACTION: Notice of establishment of the NIST Blue Ribbon Commission on Management and Safety--II... NIST Blue Ribbon Commission on Management and Safety--II ``Commission''. The Commission will assess...

The use of GIS tools for road infrastructure safety management

NASA Astrophysics Data System (ADS)

Budzyński, Marcin; Kustra, Wojciech; Okraszewska, Romanika; Jamroz, Kazimierz; Pyrchla, Jerzy

2018-01-01

There are many factors that influence accidents and their severity. They can be grouped within the system of man, vehicle and environment. The article focuses on how GIS tools can be used to manage road infrastructure safety. To ensure a better understanding and identification of road factors, GIS tools help with the acquisition of road parameter data. Their other role is helping with a clear and effective presentation of risk ranking. GIS is key to identifying high-risk sections and supports the effective communication of safety levels. This makes it a vital element of safety management. The article describes the use of GIS for the collection and visualisation of road parameter data which are not available in any of the existing databases, i.e. horizontal curve parameters. As we know from research and statistics, they are important factors that determine the safety of road infrastructure. Finally, new research is proposed as well as the possibilities for applying GIS tools for the purposes of road safety inspection.

Workplace road safety risk management: An investigation into Australian practices.

PubMed

Warmerdam, Amanda; Newnam, Sharon; Sheppard, Dianne; Griffin, Mark; Stevenson, Mark

2017-01-01

In Australia, more than 30% of the traffic volume can be attributed to work-related vehicles. Although work-related driver safety has been given increasing attention in the scientific literature, it is uncertain how well this knowledge has been translated into practice in industry. It is also unclear how current practice in industry can inform scientific knowledge. The aim of the research was to use a benchmarking tool developed by the National Road Safety Partnership Program to assess industry maturity in relation to risk management practices. A total of 83 managers from a range of small, medium and large organisations were recruited through the Victorian Work Authority. Semi-structured interviews aimed at eliciting information on current organisational practices, as well as policy and procedures around work-related driving were conducted and the data mapped onto the benchmarking tool. Overall, the results demonstrated varying levels of maturity of risk management practices across organisations, highlighting the need to build accountability within organisations, improve communication practices, improve journey management, reduce vehicle-related risk, improve driver competency through an effective workplace road safety management program and review organisational incident and infringement management. The findings of the study have important implications for industry and highlight the need to review current risk management practices. Copyright © 2016 Elsevier Ltd. All rights reserved.

Knowledge, Attitude and Practice of Healthcare Managers to Medical Waste Management and Occupational Safety Practices: Findings from Southeast Nigeria.

PubMed

Anozie, Okechukwu Bonaventure; Lawani, Lucky Osaheni; Eze, Justus Ndulue; Mamah, Emmanuel Johnbosco; Onoh, Robinson Chukwudi; Ogah, Emeka Onwe; Umezurike, Daniel Akuma; Anozie, Rita Onyinyechi

2017-03-01

Awareness of appropriate waste management procedures and occupational safety measures is fundamental to achieving a safe work environment, and ensuring patient and staff safety. This study was conducted to assess the attitude of healthcare managers to medical waste management and occupational safety practices. This was a cross-sectional study conducted among 54 hospital administrators in Ebonyi state. Semi-structured questionnaires were used for qualitative data collection and analyzed with SPSS statistics for windows (2011), version 20.0 statistical software (Armonk, NY: IBM Corp). Two-fifth (40%) of healthcare managers had received training on medical waste management and occupational safety. Standard operating procedure of waste disposal was practiced by only one hospital (1.9%), while 98.1% (53/54) practiced indiscriminate waste disposal. Injection safety boxes were widely available in all health facilities, nevertheless, the use of incinerators and waste treatment was practiced by 1.9% (1/54) facility. However, 40.7% (22/54) and 59.3% (32/54) of respondents trained their staff and organize safety orientation courses respectively. Staff insurance cover was offered by just one hospital (1.9%), while none of the hospitals had compensation package for occupational hazard victims. Over half (55.6%; 30/54) of the respondents provided both personal protective equipment and post exposure prophylaxis for HIV. There was high level of non-compliance to standard medical waste management procedures, and lack of training on occupational safety measures. Relevant regulating agencies should step up efforts at monitoring and regulation of healthcare activities and ensure staff training on safe handling and disposal of hospital waste.

Quality, risk management and patient safety: the challenge of effective integration.

PubMed

França, Margarida

2008-01-01

Nowadays we observe the development of three waves of intervention and change within healthcare services: quality management, risk management and patient safety. The Patient Safety movement has been launched at international level as a consequence of the Institute of Medicine's report--To Err is Human, and today patient safety constitutes one basic dimension of health quality subjected to the direct intervention of supranational entities (WHO, EU) and Member States' Governments. The objective of this paper is to raise awareness about the value of quality improvement (QI) methodologies and tools to sustainable healthcare quality outcomes.

Time management for preclinical safety professionals.

PubMed

Wells, Monique Y

2010-08-01

A survey about time management in the workplace was distributed to obtain a sense of the level of job satisfaction among preclinical safety professionals in the current economic climate, and to encourage reflection upon how we manage time in our work environment. Roughly equal numbers of respondents (approximately 32%) identified themselves as management or staff, and approximately 27% indicated that they are consultants. Though 45.2% of respondents indicated that time management is very challenging for the profession in general, only 36.7% find it very challenging for themselves. Ten percent of respondents view time management to be exceedingly challenging for themselves. Approximately 34% of respondents indicated that prioritization of tasks was the most challenging aspect of time management for them. Focusing on an individual task was the second most challenging aspect (26%), followed equally by procrastination and delegation of tasks (12.4%). Almost equal numbers of respondents said that they would (35.2%) or might (33.3%) undertake training to improve their time management skills. Almost equal numbers of participants responded "perhaps" (44.6%) or "yes" (44.2%) to the question of whether management personnel should be trained in time management.

Exploring robust methods for evaluating treatment and comparison groups in chronic care management programs.

PubMed

Wells, Aaron R; Hamar, Brent; Bradley, Chastity; Gandy, William M; Harrison, Patricia L; Sidney, James A; Coberley, Carter R; Rula, Elizabeth Y; Pope, James E

2013-02-01

Evaluation of chronic care management (CCM) programs is necessary to determine the behavioral, clinical, and financial value of the programs. Financial outcomes of members who are exposed to interventions (treatment group) typically are compared to those not exposed (comparison group) in a quasi-experimental study design. However, because member assignment is not randomized, outcomes reported from these designs may be biased or inefficient if study groups are not comparable or balanced prior to analysis. Two matching techniques used to achieve balanced groups are Propensity Score Matching (PSM) and Coarsened Exact Matching (CEM). Unlike PSM, CEM has been shown to yield estimates of causal (program) effects that are lowest in variance and bias for any given sample size. The objective of this case study was to provide a comprehensive comparison of these 2 matching methods within an evaluation of a CCM program administered to a large health plan during a 2-year time period. Descriptive and statistical methods were used to assess the level of balance between comparison and treatment members pre matching. Compared with PSM, CEM retained more members, achieved better balance between matched members, and resulted in a statistically insignificant Wald test statistic for group aggregation. In terms of program performance, the results showed an overall higher medical cost savings among treatment members matched using CEM compared with those matched using PSM (-$25.57 versus -$19.78, respectively). Collectively, the results suggest CEM is a viable alternative, if not the most appropriate matching method, to apply when evaluating CCM program performance.

Analysis of factors influencing safety management for metro construction in China.

PubMed

Yu, Q Z; Ding, L Y; Zhou, C; Luo, H B

2014-07-01

With the rapid development of urbanization in China, the number and size of metro construction projects are increasing quickly. At the same time, and increasing number of accidents in metro construction make it a disturbing focus of social attention. In order to improve safety management in metro construction, an investigation of the participants' perspectives on safety factors in China metro construction has been conducted to identify the key safety factors, and their ranking consistency among the main participants, including clients, consultants, designers, contractors and supervisors. The result of factor analysis indicates that there are five key factors which influence the safety of metro construction including safety attitude, construction site safety, government supervision, market restrictions and task unpredictability. In addition, ANOVA and Spearman rank correlation coefficients were performed to test the consistency of the means rating and the ranking of safety factors. The results indicated that the main participants have significant disagreement about the importance of safety factors on more than half of the items. Suggestions and recommendations on practical countermeasures to improve metro construction safety management in China are proposed. Copyright © 2013 Elsevier Ltd. All rights reserved.

Masters Study in Advanced Energy and Fuels Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mondal, Kanchan

2014-12-08

There are currently three key drivers for the US energy sector a) increasing energy demand and b) environmental stewardship in energy production for sustainability and c) general public and governmental desire for domestic resources. These drivers are also true for energy nation globally. As a result, this sector is rapidly diversifying to alternate sources that would supplement or replace fossil fuels. These changes have created a need for a highly trained workforce with a the understanding of both conventional and emerging energy resources and technology to lead and facilitate the reinvention of the US energy production, rational deployment of alternatemore » energy technologies based on scientific and business criteria while invigorating the overall economy. In addition, the current trends focus on the the need of Science, Technology, Engineering and Math (STEM) graduate education to move beyond academia and be more responsive to the workforce needs of businesses and the industry. The SIUC PSM in Advanced Energy and Fuels Management (AEFM) program was developed in response to the industries stated need for employees who combine technical competencies and workforce skills similar to all PSM degree programs. The SIUC AEFM program was designed to provide the STEM graduates with advanced technical training in energy resources and technology while simultaneously equipping them with the business management skills required by professional employers in the energy sector. Technical training include core skills in energy resources, technology and management for both conventional and emerging energy technologies. Business skills training include financial, personnel and project management. A capstone internship is also built into the program to train students such that they are acclimatized to the real world scenarios in research laboratories, in energy companies and in government agencies. The current curriculum in the SIUC AEFM will help fill the need for training both

41 CFR 102-80.10 - What are the basic safety and environmental management policies for real property?

Code of Federal Regulations, 2010 CFR

2010-07-01

... safety and environmental management policies for real property? 102-80.10 Section 102-80.10 Public... MANAGEMENT REGULATION REAL PROPERTY 80-SAFETY AND ENVIRONMENTAL MANAGEMENT General Provisions § 102-80.10 What are the basic safety and environmental management policies for real property? The basic safety and...

Comparing Occupational Health and Safety Management System Programming with Injury Rates in Poultry Production.

PubMed

Autenrieth, Daniel A; Brazile, William J; Douphrate, David I; Román-Muñiz, Ivette N; Reynolds, Stephen J

2016-01-01

Effective methods to reduce work-related injuries and illnesses in animal production agriculture are sorely needed. One approach that may be helpful for agriculture producers is the adoption of occupational health and safety management systems. In this replication study, the authors compared the injury rates on 32 poultry growing operations with the level of occupational health and safety management system programming at each farm. Overall correlations between injury rates and programming level were determined, as were correlations between individual management system subcomponents to ascertain which parts might be the most useful for poultry producers. It was found that, in general, higher levels of occupational health and safety management system programming were associated with lower rates of workplace injuries and illnesses, and that Management Leadership was the system subcomponent with the strongest correlation. The strength and significance of the observed associations were greater on poultry farms with more complete management system assessments. These findings are similar to those from a previous study of the dairy production industry, suggesting that occupational health and safety management systems may hold promise as a comprehensive way for producers to improve occupational health and safety performance. Further research is needed to determine the effectiveness of such systems to reduce farm work injuries and illnesses. These results are timely given the increasing focus on occupational safety and health management systems.

Use of safety management practices for improving project performance.

PubMed

Cheng, Eddie W L; Kelly, Stephen; Ryan, Neal

2015-01-01

Although site safety has long been a key research topic in the construction field, there is a lack of literature studying safety management practices (SMPs). The current research, therefore, aims to test the effect of SMPs on project performance. An empirical study was conducted in Hong Kong and the data collected were analysed with multiple regression analysis. Results suggest that 3 of the 15 SMPs, which were 'safety committee at project/site level', 'written safety policy', and 'safety training scheme' explained the variance in project performance significantly. Discussion about the impact of these three SMPs on construction was provided. Assuring safe construction should be an integral part of a construction project plan.

Improving patient safety and optimizing nursing teamwork using crew resource management techniques.

PubMed

West, Priscilla; Sculli, Gary; Fore, Amanda; Okam, Nwoha; Dunlap, Cleveland; Neily, Julia; Mills, Peter

2012-01-01

This project describes the application of the "sterile cockpit rule," a crew resource management (CRM) technique, targeted to improve efficacy and safety for nursing assistants in the performance of patient care duties. Crew resource management techniques have been successfully implemented in the aviation industry to improve flight safety. Application of these techniques can improve patient safety in medical settings. The Veterans Affairs (VA) National Center for Patient Safety conducted a CRM training program in select VA nursing units. One unit developed a novel application of the sterile cockpit rule to create protected time for certified nursing assistants (CNAs) while they collected vital signs and blood glucose data at the beginning of each shift. The typical nursing authority structure was reversed, with senior nurses protecting CNAs from distractions. This process led to improvements in efficiency and communication among nurses, with the added benefit of increased staff morale. Crew resource management techniques can be used to improve efficiency, morale, and patient safety in the healthcare setting.

Evaluation and review of the safety management system implementation in the Royal Thai Air Force

NASA Astrophysics Data System (ADS)

Chaiwan, Sakkarin

This study was designed to determine situation and effectiveness of the safety management system currently implemented in the Royal Thai Air Force. Reviewing the ICAO's SMS and the RTAF's SMS was conducted to identify similarities and differences between the two safety management systems. Later, the researcher acquired safety statistics from the RTAF Safety Center to investigate effectiveness of its safety system. The researcher also collected data to identify other factors affecting effectiveness of the safety system during conducting in-depth interviews. Findings and Conclusions: The study shows that the Royal Thai Air Force has never applied the International Civil Aviation Organization's Safety management System to its safety system. However, the RTAF's SMS and the ICAO's SMS have been developed based on the same concepts. These concepts are from Richard H. Woods's book, Aviation safety programs: A management handbook. However, the effectiveness of the Royal Thai Air Force's safety system is in good stance. An accident rate has been decreasing regularly but there are no known factors to describe the increasing rate, according to the participants' opinion. The participants have informed that there are many issues to be resolved to improve the RTAF's safety system. Those issues are cooperation among safety center's staffs, attitude toward safety of the RTAF senior commanders, and safety standards.

[Patient safety culture in directors and managers of a health service].

PubMed

Giménez-Júlvez, Teresa; Hernández-García, Ignacio; Aibar-Remón, Carlos; Gutiérrez-Cía, Isabel; Febrel-Bordejé, Mercedes

To assess patient safety culture in directors/managers. Cross-sectional descriptive study carried out from February to June 2011 among the executive/managing staff of the Aragón Health Service through semi-structured interviews. A total of 12 interviews were carried out. All the respondents admitted that there were many patient safety problems and agreed that patient safety was a priority from a theoretical rather than practical perspective. The excessive changes in executive positions was considered to be an important barrier which made it difficult to establish long-term strategies and achieve medium-term continuity. This study recorded perceptions on patient safety culture in directors, an essential factor to improve patient safety culture in this group and in the organisations they run. Copyright © 2017 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

Software for the occupational health and safety integrated management system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vătăsescu, Mihaela

2015-03-10

This paper intends to present the design and the production of a software for the Occupational Health and Safety Integrated Management System with the view to a rapid drawing up of the system documents in the field of occupational health and safety.

78 FR 48046 - Safety Zone; Kuoni Destination Management Fireworks; San Diego, CA

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-07

...-AA00 Safety Zone; Kuoni Destination Management Fireworks; San Diego, CA AGENCY: Coast Guard, DHS. ACTION: Temporary final rule. SUMMARY: The Coast Guard is establishing a safety zone on the navigable..., 2013. This temporary safety zone is necessary to provide for the safety of the participants, crew...

Tank waste remediation system nuclear criticality safety program management review

DOE Office of Scientific and Technical Information (OSTI.GOV)

BRADY RAAP, M.C.

1999-06-24

This document provides the results of an internal management review of the Tank Waste Remediation System (TWRS) criticality safety program, performed in advance of the DOE/RL assessment for closure of the TWRS Nuclear Criticality Safety Issue, March 1994. Resolution of the safety issue was identified as Hanford Federal Facility Agreement and Consent Order (Tri-Party Agreement) Milestone M-40-12, due September 1999.

Does lean management improve patient safety culture? An extensive evaluation of safety culture in a radiotherapy institute.

PubMed

Simons, Pascale A M; Houben, Ruud; Vlayen, Annemie; Hellings, Johan; Pijls-Johannesma, Madelon; Marneffe, Wim; Vandijck, Dominique

2015-02-01

The importance of a safety culture to maximize safety is no longer questioned. However, achieving sustainable culture improvements are less evident. Evidence is growing for a multifaceted approach, where multiple safety interventions are combined. Lean management is such an integral approach to improve safety, quality and efficiency and therefore, could be expected to improve the safety culture. This paper presents the effects of lean management activities on the patient safety culture in a radiotherapy institute. Patient safety culture was evaluated over a three year period using triangulation of methodologies. Two surveys were distributed three times, workshops were performed twice, data from an incident reporting system (IRS) was monitored and results were explored using structured interviews with professionals. Averages, chi-square, logistical and multi-level regression were used for analysis. The workshops showed no changes in safety culture, whereas the surveys showed improvements on six out of twelve dimensions of safety climate. The intention to report incidents not reaching patient-level decreased in accordance with the decreasing number of reports in the IRS. However, the intention to take action in order to prevent future incidents improved (factorial survey presented β: 1.19 with p: 0.01). Due to increased problem solving and improvements in equipment, the number of incidents decreased. Although the intention to report incidents not reaching patient-level decreased, employees experienced sustained safety awareness and an increased intention to structurally improve. The patient safety culture improved due to the lean activities combined with an organizational restructure, and actual patient safety outcomes might have improved as well. Copyright © 2014 Elsevier Ltd. All rights reserved.

Making patient safety the focus: crisis resource management in the undergraduate curriculum.

PubMed

Flanagan, Brendan; Nestel, Debra; Joseph, Michele

2004-01-01

This paper examines the role of high fidelity simulation and crisis resource management in bridging the gap between theory and practice. Patient safety is fundamental to healthcare professional practice and is a common goal for healthcare providers. It provides a focus to motivate practitioners. Patient safety issues are not a priority in undergraduate curricula. Raising the profile at this level is crucial to improving the safety and quality of healthcare delivery. This paper explores the role of simulation in providing a realistic, safe environment for participants with different levels of experience to manage evolving crises in the context of their work environment. The Southern Health Simulation and Skills Centre uses a patient safety focus in delivering a specialised educational programme adapted from aviation to healthcare. The programme, crisis resource management, enables participants to consolidate knowledge, attitudes and skills to achieve a deeper understanding of how their performance impacts on patient safety and the quality of healthcare provided. Self-reported written evaluation data was collected from participants of three different courses at Southern Health. Participants consistently report that these courses offer unique learning experiences that address aspects of workplace learning in ways that have not previously been possible. A video-assisted reflective process powerfully reinforces learning. Crisis resource management courses demonstrate the value of simulation in bridging the gap between 'knowing' and 'doing' and keeping the focus on patient safety. Recommendations are made for ways in which the core elements of crisis resource management philosophy can influence the conceptualization of a new medical curriculum.

30 CFR 285.811 - When must I follow my Safety Management System?

Code of Federal Regulations, 2011 CFR

2011-07-01

... Activities Conducted Under SAPs, COPs and GAPs Safety Management Systems § 285.811 When must I follow my... activities described in your approved COP, SAP, or GAP. You must conduct all activities described in your approved COP, SAP, or GAP in accordance with the Safety Management System you described, as required by...

Forest management practices and the occupational safety and health administration logging standard

Treesearch

John R. Myers; David Elton Fosbroke

1995-01-01

The Occupational Safety and Health Administration (OSHA) has established safety and health regulations for the logging industry. These new regulations move beyond the prior OSHA pulpwood harvesting standard by including sawtimber harvesting operations. Because logging is a major tool used by forest managers to meet silvicultural goals, managers must be aware of what...

75 FR 5244 - Pipeline Safety: Integrity Management Program for Gas Distribution Pipelines; Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-02

... Management Program for Gas Distribution Pipelines; Correction AGENCY: Pipeline and Hazardous Materials Safety... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part... Regulations to require operators of gas distribution pipelines to develop and implement integrity management...

Safety Management Information Statistics (SAMIS) - 1995 Annual Report

DOT National Transportation Integrated Search

1997-04-01

The Safety Management Information Statistics 1995 Annual Report is a compilation and analysis of transit accident, casualty and crime statistics reported under the Federal Transit Administration's National Transit Database Reporting by transit system...

75 FR 67450 - Pipeline Safety: Control Room Management Implementation Workshop

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-02

... PHMSA-2010-0294] Pipeline Safety: Control Room Management Implementation Workshop AGENCY: Pipeline and...) on the implementation of pipeline control room management. The workshop is intended to foster an understanding of the Control Room Management Rule issued by PHMSA on December 3, 2009, and is open to the public...

Risk management modeling and its application in maritime safety

NASA Astrophysics Data System (ADS)

Qin, Ting-Rong; Chen, Wei-Jiong; Zeng, Xiang-Kun

2008-12-01

Quantified risk assessment (QRA) needs mathematicization of risk theory. However, attention has been paid almost exclusively to applications of assessment methods, which has led to neglect of research into fundamental theories, such as the relationships among risk, safety, danger, and so on. In order to solve this problem, as a first step, fundamental theoretical relationships about risk and risk management were analyzed for this paper in the light of mathematics, and then illustrated with some charts. Second, man-machine-environment-management (MMEM) theory was introduced into risk theory to analyze some properties of risk. On the basis of this, a three-dimensional model of risk management was established that includes: a goal dimension; a management dimension; an operation dimension. This goal management operation (GMO) model was explained and then emphasis was laid on the discussion of the risk flowchart (operation dimension), which lays the groundwork for further study of risk management and qualitative and quantitative assessment. Next, the relationship between Formal Safety Assessment (FSA) and Risk Management was researched. This revealed that the FSA method, which the international maritime organization (IMO) is actively spreading, comes from Risk Management theory. Finally, conclusion were made about how to apply this risk management method to concrete fields efficiently and conveniently, as well as areas where further research is required.

Safety Management Information Statistics (SAMIS) - 1993 Annual Report

DOT National Transportation Integrated Search

1995-05-01

The 1993 Safety Management Information Statistics (SAMIS) report, now in its fourth year of publication, is a compilation and analysis of transit accident and casualty statistics uniformly collected from approximately 400 transit agencies throughout ...

Radiation safety requirements for radioactive waste management in the framework of a quality management system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Salgado, M.M.; Benitez, J.C.; Pernas, R.

2007-07-01

The Center for Radiation Protection and Hygiene (CPHR) is the institution responsible for the management of radioactive wastes generated from nuclear applications in medicine, industry and research in Cuba. Radioactive Waste Management Service is provided at a national level and it includes the collection and transportation of radioactive wastes to the Centralized Waste Management Facilities, where they are characterized, segregated, treated, conditioned and stored. A Quality Management System, according to the ISO 9001 Standard has been implemented for the RWM Service at CPHR. The Management System includes the radiation safety requirements established for RWM in national regulations and in themore » Licence's conditions. The role of the Regulatory Body and the Radiation Protection Officer in the Quality Management System, the authorization of practices, training and personal qualification, record keeping, inspections of the Regulatory Body and internal inspection of the Radiation Protection Officer, among other aspects, are described in this paper. The Quality Management System has shown to be an efficient tool to demonstrate that adequate measures are in place to ensure the safety in radioactive waste management activities and their continual improvement. (authors)« less

Safety management in multiemployer worksites in the manufacturing industry: opinions on co-operation and problems encountered.

PubMed

Nenonen, Sanna; Vasara, Juha

2013-01-01

Co-operation between different parties and effective safety management play an important role in ensuring safety in multiemployer worksites. This article reviews safety co-operation and factors complicating safety management in Finnish multiemployer manufacturing worksites. The paper focuses on the service providers' opinions; however, a comparison of the customers' views is also presented. The results show that safety-related co-operation between providers and customers is generally considered as successful but strongly dependent on the partner. Safety co-operation is provided through, e.g., training, orientation and risk analysis. Problems encountered include ensuring adequate communication, identifying hazards, co-ordinating work tasks and determining responsibilities. The providers and the customers encounter similar safety management problems. The results presented in this article can help companies to focus their efforts on the most problematic points of safety management and to avoid common pitfalls.

[B-BS and occupational health and safety management systems: the SGSL certification].

PubMed

Calabrese, G; Candura, G

2010-01-01

The social costs deriving from the lack of occupational safety, which nowadays constitute approximately 2.8% of the GDP, tend not to come down despite the regulations, the inspections and the sanctions. The problems may be ascribed both to a shortage of systemic actions and to inappropriate training of the workers. Possible solutions are represented by the adoption of organizational models (D. Lgs. 81 art. 30) and by the implementation of protocols such as the Behavior-Based Safety (B-BS). Organisational and Management Models have been introduced with art. 30 D.Lgs. 81/2008 and with art. 6 D.Lgs. 231/2001. The comparison between their requisites and the ones specified by the OHSAS 18001 standards, confirms the partial overlapping of the Organizational Models with the Occupational Health & Safety Management Systems. Nevertheless such Systems are rarely adopted by Italian companies and their implementation still doesn't grant complete effectiveness. The B-BS protocol is proving to be a tool of extraordinary value to increase the level of safety, especially when used along with the known Health & Safety Management Systems.

Construction managers' perceptions of construction safety practices in small and large firms: a qualitative investigation.

PubMed

Gillen, Marion; Kools, Susan; McCall, Cade; Sum, Juliann; Moulden, Kelli

2004-01-01

Despite the institution of explicit safety practices in construction, there continue to be exceedingly high rates of morbidity and mortality from work-related injury. This study's purpose was to identify, compare and contrast views of construction managers from large and small firms regarding construction safety practices. A complementary analysis was conducted with construction workers. A semi-structured interview guide was used to elicit information from construction managers (n = 22) in a series of focus groups. Questions were designed to obtain information on direct safety practices and indirect practices such as communication style, attitude, expectations, and unspoken messages. Data were analyzed using thematic content analysis. Managers identified a broad commitment to safety, worker training, a changing workplace culture, and uniform enforcement as key constructs in maintaining safe worksites. Findings indicate that successful managers need to be involved, principled, flexible, and innovative. Best practices, as well as unsuccessful injury prevention programs, were discussed in detail. Obstacles to consistent safety practice include poor training, production schedules and financial constraints. Construction managers play a pivotal role in the definition and implementation of safety practices in the workplace. In order to succeed in this role, they require a wide variety of management skills, upper management support, and tools that will help them instill and maintain a positive safety culture. Developing and expanding management skills of construction managers may assist them in dealing with the complexity of the construction work environment, as well as providing them with the tools necessary to decrease work-related injuries.

Safety Management Information Statistics (SAMIS) - 1991 Annual Report

DOT National Transportation Integrated Search

1993-02-01

The Safety Management Information Statistics 1991 Annual Report is a compilation and analysis of mass transit accident and casualty statistics reported by transit systems in the United States during 1991, under FTA's Section 15 reporting system.

Safety Management Information Statistics (SAMIS) - 1994 Annual Report

DOT National Transportation Integrated Search

1996-07-01

The Safety Management Information Statistics 1994 Annual Report is a compilation and analysis of mass transit accident and casualty statistics reported by transit systems in the United States during 1994, reported under the Federal Transit Administra...

75 FR 23782 - Drug Safety and Risk Management Advisory Committee; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-04

...] Drug Safety and Risk Management Advisory Committee; Notice of Meeting AGENCY: Food and Drug...: Drug Safety and Risk Management Advisory Committee. General Function of the Committee: To provide... potential of the drug dextromethorphan and the public health benefits and risks of dextromethorphan use as a...

Safety management as a foundation for evidence-based aeromedical standards and reporting of medical events.

PubMed

Evans, Anthony D; Watson, Dougal B; Evans, Sally A; Hastings, John; Singh, Jarnail; Thibeault, Claude

2009-06-01

The different interpretations by States (countries) of the aeromedical standards established by the International Civil Aviation Organization has resulted in a variety of approaches to the development of national aeromedical policy, and consequently a relative lack of harmonization. However, in many areas of aviation, safety management systems have been recently introduced and may represent a way forward. A safety management system can be defined as "A systematic approach to managing safety, including the necessary organizational structures, accountabilities, policies, and procedures" (1). There are four main areas where, by applying safety management principles, it may be possible to better use aeromedical data to enhance flight safety. These are: 1) adjustment of the periodicity and content of routine medical examinations to more accurately reflect aeromedical risk; 2) improvement in reporting and analysis of routine medical examination data; 3) improvement in reporting and analysis of in-flight medical events; and 4) support for improved reporting of relevant aeromedical events through the promotion of an appropriate culture by companies and regulatory authorities. This paper explores how the principles of safety management may be applied to aeromedical systems to improve their contribution to safety.

Configuration and Data Management Process and the System Safety Professional

NASA Technical Reports Server (NTRS)

Shivers, Charles Herbert; Parker, Nelson C. (Technical Monitor)

2001-01-01

This article presents a discussion of the configuration management (CM) and the Data Management (DM) functions and provides a perspective of the importance of configuration and data management processes to the success of system safety activities. The article addresses the basic requirements of configuration and data management generally based on NASA configuration and data management policies and practices, although the concepts are likely to represent processes of any public or private organization's well-designed configuration and data management program.

Joint FAM/Line Management Assessment Report on LLNL Machine Guarding Safety Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Armstrong, J. J.

2016-07-19

The LLNL Safety Program for Machine Guarding is implemented to comply with requirements in the ES&H Manual Document 11.2, "Hazards-General and Miscellaneous," Section 13 Machine Guarding (Rev 18, issued Dec. 15, 2015). The primary goal of this LLNL Safety Program is to ensure that LLNL operations involving machine guarding are managed so that workers, equipment and government property are adequately protected. This means that all such operations are planned and approved using the Integrated Safety Management System to provide the most cost effective and safest means available to support the LLNL mission.

Leadership style and patient safety: implications for nurse managers.

PubMed

Merrill, Katreena Collette

2015-06-01

The purpose of this study was to explore the relationship between nurse manager (NM) leadership style and safety climate. Nursing leaders are needed who will change the environment and increase patient safety. Hospital NMs are positioned to impact day-to-day operations. Therefore, it is essential to inform nurse executives regarding the impact of leadership style on patient safety. A descriptive correlational study was conducted in 41 nursing departments across 9 hospitals. The hospital unit safety climate survey and multifactorial leadership questionnaire were completed by 466 staff nurses. Bivariate and regression analyses were conducted to determine how well leadership style predicted safety climate. Transformational leadership style was demonstrated as a positive contributor to safety climate, whereas laissez-faire leadership style was shown to negatively contribute to unit socialization and a culture of blame. Nursing leaders must concentrate on developing transformational leadership skills while also diminishing negative leadership styles.

A system of safety management practices and worker engagement for reducing and preventing accidents: an empirical and theoretical investigation.

PubMed

Wachter, Jan K; Yorio, Patrick L

2014-07-01

The overall research objective was to theoretically and empirically develop the ideas around a system of safety management practices (ten practices were elaborated), to test their relationship with objective safety statistics (such as accident rates), and to explore how these practices work to achieve positive safety results (accident prevention) through worker engagement. Data were collected using safety manager, supervisor and employee surveys designed to assess and link safety management system practices, employee perceptions resulting from existing practices, and safety performance outcomes. Results indicate the following: there is a significant negative relationship between the presence of ten individual safety management practices, as well as the composite of these practices, with accident rates; there is a significant negative relationship between the level of safety-focused worker emotional and cognitive engagement with accident rates; safety management systems and worker engagement levels can be used individually to predict accident rates; safety management systems can be used to predict worker engagement levels; and worker engagement levels act as mediators between the safety management system and safety performance outcomes (such as accident rates). Even though the presence of safety management system practices is linked with incident reduction and may represent a necessary first-step in accident prevention, safety performance may also depend on mediation by safety-focused cognitive and emotional engagement by workers. Thus, when organizations invest in a safety management system approach to reducing/preventing accidents and improving safety performance, they should also be concerned about winning over the minds and hearts of their workers through human performance-based safety management systems designed to promote and enhance worker engagement. Copyright © 2013 The Authors. Published by Elsevier Ltd.. All rights reserved.

75 FR 5536 - Pipeline Safety: Control Room Management/Human Factors, Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-03

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Parts...: Control Room Management/Human Factors, Correction AGENCY: Pipeline and Hazardous Materials Safety... following correcting amendments: PART 192--TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM...

Fire Safety. Managing School Facilities, Guide 6.

ERIC Educational Resources Information Center

Department for Education and Employment, London (England). Architects and Building Branch.

This booklet discusses how United Kingdom schools can manage fire safety and minimize the risk of fire. The guide examines what legislation school buildings must comply with and covers the major risks. It also describes training and evacuation procedures and provides guidance on fire precautions, alarm systems, fire fighting equipment, and escape…

A safety management system for an offshore Azerbaijan Caspian Sea Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brasic, M.F.; Barber, S.W.; Hill, A.S.

1996-11-01

This presentation will describe the Safety Management System that Azerbaijan International Operating Company (AIOC) has structured to assure that Company activities are performed in a manner that protects the public, the environment, contractors and AIOC employees. The Azerbaijan International Oil Company is a consortium of oil companies that includes Socar, the state oil company of Azerbaijan, a number of major westem oil companies, and companies from Russia, Turkey and Saudi Arabia. The Consortium was formed to develop and produce a group of large oil fields in the Caspian Sea. The Management of AIOC, in starting a new operation in Azerbaijan,more » recognized the need for a formal HSE management system to ensure that their HSE objectives for AIOC activities were met. As a consortium of different partners working together in a unique operation, no individual partner company HSE Management system was appropriate. Accordingly AIOC has utilized the E & P Forum {open_quotes}Guidelines for the Development and Application of Health Safety and Environmental Management Systems{close_quotes} as the framework document for the development of the new AIOC system. Consistent with this guideline, AIOC has developed 19 specific HSE Management System Expectations for implementing its HSE policy and objectives. The objective is to establish and continue to maintain operational integrity in all AIOC activities and site operations. An important feature is the use of structured Safety Cases for the design engineering activity. The basis for the Safety Cases is API RP 75 and 14 J for offshore facilities and API RP 750 for onshore facilities both complimented by {open_quotes}Best International Oilfield Practice{close_quotes}. When viewed overall, this approach provides a fully integrated system of HSE management from design into operation.« less

Preparing Safety Cases for Operating Outside Prescriptive Fatigue Risk Management Regulations.

PubMed

Gander, Philippa; Mangie, Jim; Wu, Lora; van den Berg, Margo; Signal, Leigh; Phillips, Adrienne

2017-07-01

Transport operators seeking to operate outside prescriptive fatigue management regulations are typically required to present a safety case justifying how they will manage the associated risk. This paper details a method for constructing a successful safety case. The method includes four elements: 1) scope (prescriptive rules and operations affected); 2) risk assessment; 3) risk mitigation strategies; and 4) monitoring ongoing risk. A successful safety case illustrates this method. It enables landing pilots in 3-pilot crews to choose the second or third in-flight rest break, rather than the regulatory requirement to take the third break. Scope was defined using a month of scheduled flights that would be covered (N = 4151). These were analyzed in the risk assessment using existing literature on factors affecting fatigue to estimate the maximum time awake at top of descent and sleep opportunities in each break. Additionally, limited data collected before the new regulations showed that pilots flying at landing chose the third break on only 6% of flights. A prospective survey comparing subjective reports (N = 280) of sleep in the second vs. third break and fatigue and sleepiness ratings at top of descent confirmed that the third break is not consistently superior. The safety case also summarized established systems for fatigue monitoring, risk assessment and hazard identification, and multiple fatigue mitigation strategies that are in place. Other successful safety cases have used this method. The evidence required depends on the expected level of risk and should evolve as experience with fatigue risk management systems builds.Gander P, Mangie J, Wu L, van den Berg M, Signal L, Phillips A. Preparing safety cases for operating outside prescriptive fatigue risk management regulations. Aerosp Med Hum Perform. 2017; 88(7):688-696.

Research on asset management for safety and operations.

DOT National Transportation Integrated Search

2011-11-01

The Texas Department of Transportation (TxDOT) is challenged with managing a wide range of : transportation safety and operations assets in order to respond to public and other outside interests. These : assets include, but are not limited to pavemen...

Loss Prevention through Safety Belt Use: A Handbook for Managers.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

This handbook is designed to help managers address safety belt usage issues through a cost-effective and direct approach--establishing an employee safety belt program. The handbook offers a hands-on guide for conducting the program and provides for implementation at all levels. The handbook contains cost information, a program overview, policy and…

Management of nanomaterials safety in research environment.

PubMed

Groso, Amela; Petri-Fink, Alke; Magrez, Arnaud; Riediker, Michael; Meyer, Thierry

2010-12-10

Despite numerous discussions, workshops, reviews and reports about responsible development of nanotechnology, information describing health and environmental risk of engineered nanoparticles or nanomaterials is severely lacking and thus insufficient for completing rigorous risk assessment on their use. However, since preliminary scientific evaluations indicate that there are reasonable suspicions that activities involving nanomaterials might have damaging effects on human health; the precautionary principle must be applied. Public and private institutions as well as industries have the duty to adopt preventive and protective measures proportionate to the risk intensity and the desired level of protection. In this work, we present a practical, 'user-friendly' procedure for a university-wide safety and health management of nanomaterials, developed as a multi-stakeholder effort (government, accident insurance, researchers and experts for occupational safety and health). The process starts using a schematic decision tree that allows classifying the nano laboratory into three hazard classes similar to a control banding approach (from Nano 3--highest hazard to Nano1--lowest hazard). Classifying laboratories into risk classes would require considering actual or potential exposure to the nanomaterial as well as statistical data on health effects of exposure. Due to the fact that these data (as well as exposure limits for each individual material) are not available, risk classes could not be determined. For each hazard level we then provide a list of required risk mitigation measures (technical, organizational and personal). The target 'users' of this safety and health methodology are researchers and safety officers. They can rapidly access the precautionary hazard class of their activities and the corresponding adequate safety and health measures. We succeed in convincing scientist dealing with nano-activities that adequate safety measures and management are promoting

Management of nanomaterials safety in research environment

PubMed Central

2010-01-01

Despite numerous discussions, workshops, reviews and reports about responsible development of nanotechnology, information describing health and environmental risk of engineered nanoparticles or nanomaterials is severely lacking and thus insufficient for completing rigorous risk assessment on their use. However, since preliminary scientific evaluations indicate that there are reasonable suspicions that activities involving nanomaterials might have damaging effects on human health; the precautionary principle must be applied. Public and private institutions as well as industries have the duty to adopt preventive and protective measures proportionate to the risk intensity and the desired level of protection. In this work, we present a practical, 'user-friendly' procedure for a university-wide safety and health management of nanomaterials, developed as a multi-stakeholder effort (government, accident insurance, researchers and experts for occupational safety and health). The process starts using a schematic decision tree that allows classifying the nano laboratory into three hazard classes similar to a control banding approach (from Nano 3 - highest hazard to Nano1 - lowest hazard). Classifying laboratories into risk classes would require considering actual or potential exposure to the nanomaterial as well as statistical data on health effects of exposure. Due to the fact that these data (as well as exposure limits for each individual material) are not available, risk classes could not be determined. For each hazard level we then provide a list of required risk mitigation measures (technical, organizational and personal). The target 'users' of this safety and health methodology are researchers and safety officers. They can rapidly access the precautionary hazard class of their activities and the corresponding adequate safety and health measures. We succeed in convincing scientist dealing with nano-activities that adequate safety measures and management are promoting

VRLane: a desktop virtual safety management program for underground coal mine

NASA Astrophysics Data System (ADS)

Li, Mei; Chen, Jingzhu; Xiong, Wei; Zhang, Pengpeng; Wu, Daozheng

2008-10-01

VR technologies, which generate immersive, interactive, and three-dimensional (3D) environments, are seldom applied to coal mine safety work management. In this paper, a new method that combined the VR technologies with underground mine safety management system was explored. A desktop virtual safety management program for underground coal mine, called VRLane, was developed. The paper mainly concerned about the current research advance in VR, system design, key techniques and system application. Two important techniques were introduced in the paper. Firstly, an algorithm was designed and implemented, with which the 3D laneway models and equipment models can be built on the basis of the latest mine 2D drawings automatically, whereas common VR programs established 3D environment by using 3DS Max or the other 3D modeling software packages with which laneway models were built manually and laboriously. Secondly, VRLane realized system integration with underground industrial automation. VRLane not only described a realistic 3D laneway environment, but also described the status of the coal mining, with functions of displaying the run states and related parameters of equipment, per-alarming the abnormal mining events, and animating mine cars, mine workers, or long-wall shearers. The system, with advantages of cheap, dynamic, easy to maintenance, provided a useful tool for safety production management in coal mine.

Impact of software and hardware technologies on occupational health and safety policies in Saudi Arabian oil refineries.

PubMed

Idreis, Hany M; Siqueira, Carlos E; Levenstein, Charles C

2006-01-01

This article seeks to examine the impact of technology importation on occupational health and safety in both Saudi Arabian and U.S. oil refining industries. Technologies imported to the Saudi oil industry take two forms: hardware (sophisticated equipment to run oil facilities) and software (policies and regulations pertaining to workers' health and safety, and employment rights installed by Aramco's founding multinational companies). This study utilizes qualitative, historically oriented, cross-national case studies to compare and assess workers' health, safety, and rights in Saudi Aramco with its U.S. counterpart, Motiva Enterprises. Two facilities were chosen to conduct field research: the Saudi Aramco oil refinery at Jeddah and Motiva's refinery at Port Arthur, Texas. The Jeddah refinery is fully owned by Saudi Aramco, thus, representing Aramco's health and safety policies and regulations. The Port Arthur refinery serves as a reference case study for U.S. oil refining facilities. The aspects of occupational health and safety in Saudi Aramco--ExxonMobil's joint ventures SAMREF and LUBREF--also are discussed to examine workers' health policies in both companies. The American oil industry made a significant contribution in establishing the Saudi oil industry, with the cooperation of the Saudi government. Despite having outstanding employment benefits schemes in Saudi Aramco, the presence of an organized work force better serves employee participation in Motiva than in Aramco. Safety systems such as Process Safety Management (PSM)--applied in Motiva--partially exist in Aramco to operate hardware technologies safely. Motiva training systems are better through PACE's Triangle of Prevention (TOP). Both companies follow the same pattern of handling occupational injuries and diseases; however, Saudi government agencies (GOSI) are responsible for compensating and treating injured workers. Saudi workers expressed conditional support for the worker committee program

Occupational Health and Safety Management and Turnover Intention in the Ghanaian Mining Sector.

PubMed

Amponsah-Tawiah, Kwesi; Ntow, Michael Akomeah Ofori; Mensah, Justice

2016-03-01

The mining industry is considered as one of the most dangerous and hazardous industries and the need for effective and efficient occupational health and safety management is critical to safeguard workers and the industry. Despite the dangers and hazards present in the mining industry, only few studies have focused on how occupational health and safety and turnover intentions in the mines. The study suing a cross-sectional survey design collected quantitative data from the 255 mine workers that were conveniently sampled from the Ghanaian mining industry. The data collection tools were standardized questionnaires that measured occupational health and safety management and turnover intentions. These scales were also pretested before their usage in actual data collection. The correlation coefficient showed that a negative relationship existed between dimensions of occupational health and safety management and turnover intention; safety leadership (r = -0.33, p < 0.01); supervision (r = -0.26, p < 0.01); safety facilities and equipment (r = -0.32, p < 0.01); safety procedure (r = -0.27, p < 0.01). Among these dimensions, safety leadership and safety facility were significant predictors of turnover intention, (β = -0.28, p < 0.01) and (β = -0.24, p < 0.01) respectively. The study also found that turnover intention of employees is heavily influenced by the commitment of safety leadership in ensuring the effective formulation of policies and supervision of occupational health and safety at the workplace. The present study demonstrates that safety leadership is crucial in the administration of occupational health and safety and reducing turnover intention in organizations.

[B-BS and occupational health and safety management systems].

PubMed

Bacchetta, Adriano Paolo

2010-01-01

The objective of a SGSL is the "prevention" agreement as approach of "pro-active" toward the safety at work through the construction of an integrated managerial system in synergic an dynamic way with the business organization, according to continuous improvement principles. Nevertheless the adoption of a SGSL, not could guarantee by itself the obtainment of the full effectiveness than projected and every individual's adhesion to it, must guarantee it's personal involvement in proactive way, so that to succeed to actual really how much hypothesized to systemic level to increase the safety in firm. The objective of a behavioral safety process that comes to be integrated in a SGSL, it has the purpose to succeed in implementing in firm a process of cultural change that raises the workers social group fundamental safety value, producing an ample and full involvement of all in the activities of safety at work development. SGSL = Occupational Health and Safety Management System.

Clinical risk management and patient safety education for nurses: a critique.

PubMed

Johnstone, Megan-Jane; Kanitsaki, Olga

2007-04-01

Nurses have a pivotal role to play in clinical risk management (CRM) and promoting patient safety in health care domains. Accordingly, nurses need to be prepared educationally to manage clinical risk effectively when delivering patient care. Just what form the CRM and safety education of nurses should take, however, remains an open question. A recent search of the literature has revealed a surprising lack of evidence substantiating models of effective CRM and safety education for nurses. In this paper, a critical discussion is advanced on the question of CRM and safety education for nurses and the need for nurse education in this area to be reviewed and systematically researched as a strategic priority, nationally and internationally. It is a key contention of this paper that without 'good' safety education research it will not be possible to ensure that the educational programs that are being offered to nurses in this area are evidence-based and designed in a manner that will enable nurses to develop the capabilities they need to respond effectively to the multifaceted and complex demands that are inherent in their ethical and professional responsibilities to promote and protect patient safety and quality care in health care domains.

Safety management for polluted confined space with IT system: a running case.

PubMed

Hwang, Jing-Jang; Wu, Chien-Hsing; Zhuang, Zheng-Yun; Hsu, Yi-Chang

2015-01-01

This study traced a deployed real IT system to enhance occupational safety for a polluted confined space. By incorporating wireless technology, it automatically monitors the status of workers on the site and upon detected anomalous events, managers are notified effectively. The system, with a redefined standard operations process, is running well at one of Formosa Petrochemical Corporation's refineries. Evidence shows that after deployment, the system does enhance the safety level by real-time monitoring the workers and by managing well and controlling the anomalies. Therefore, such technical architecture can be applied to similar scenarios for safety enhancement purposes.

Comprehensive safety management and assessment at rugby football competitions.

PubMed

Tajima, T; Chosa, E; Kawahara, K; Nakamura, Y; Yoshikawa, D; Yamaguchi, N; Kashiwagi, T

2014-11-01

The present study aims to improve medical systems by designing objective safety assessment criteria for rugby competitions. We evaluated 195 competitions between 2002 and 2011 using an original safety scale comprising the following sections: 1) competence of staff such as referees, medical attendants and match day doctor; 2) environment such as weather, wet bulb globe temperature and field conditions; and 3) emergency medical care systems at the competitions. Each section was subdivided into groups A, B and C according to good, normal or fair degrees of safety determined by combinations of the results.Overall safety was assessed as A, B and C for 110, 78 and 7 competitions, respectively. The assessments of individual major factors were mostly favorable for staff, but the environment and medical care systems were assessed as C in 25 and 70, respectively, of the 195 competitions. Medical management involves not having a match day doctor, but also comprehensive management including preventive factors and responses from the staff, environment and medical-care systems. 6 cases of severe injuries and accidents occurred between 2002 and 2011, which were observed in Grade A competition. These cases revealed better prognosis without obvious impairment, thus confirming the value of the present assessment scale. © Georg Thieme Verlag KG Stuttgart · New York.

Risk Informed Margins Management as part of Risk Informed Safety Margin Characterization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Curtis Smith

2014-06-01

The ability to better characterize and quantify safety margin is important to improved decision making about Light Water Reactor (LWR) design, operation, and plant life extension. A systematic approach to characterization of safety margins and the subsequent margin management options represents a vital input to the licensee and regulatory analysis and decision making that will be involved. In addition, as research and development in the LWR Sustainability (LWRS) Program and other collaborative efforts yield new data, sensors, and improved scientific understanding of physical processes that govern the aging and degradation of plant SSCs needs and opportunities to better optimize plantmore » safety and performance will become known. To support decision making related to economics, readability, and safety, the Risk Informed Safety Margin Characterization (RISMC) Pathway provides methods and tools that enable mitigation options known as risk informed margins management (RIMM) strategies.« less

Occupational Health and Safety Management and Turnover Intention in the Ghanaian Mining Sector

PubMed Central

Amponsah-Tawiah, Kwesi; Ntow, Michael Akomeah Ofori; Mensah, Justice

2015-01-01

Background The mining industry is considered as one of the most dangerous and hazardous industries and the need for effective and efficient occupational health and safety management is critical to safeguard workers and the industry. Despite the dangers and hazards present in the mining industry, only few studies have focused on how occupational health and safety and turnover intentions in the mines. Method The study suing a cross-sectional survey design collected quantitative data from the 255 mine workers that were conveniently sampled from the Ghanaian mining industry. The data collection tools were standardized questionnaires that measured occupational health and safety management and turnover intentions. These scales were also pretested before their usage in actual data collection. Results The correlation coefficient showed that a negative relationship existed between dimensions of occupational health and safety management and turnover intention; safety leadership (r = −0.33, p < 0.01); supervision (r = −0.26, p < 0.01); safety facilities and equipment (r = −0.32, p < 0.01); safety procedure (r = −0.27, p < 0.01). Among these dimensions, safety leadership and safety facility were significant predictors of turnover intention, (β = −0.28, p < 0.01) and (β = −0.24, p < 0.01) respectively. The study also found that turnover intention of employees is heavily influenced by the commitment of safety leadership in ensuring the effective formulation of policies and supervision of occupational health and safety at the workplace. Conclusion The present study demonstrates that safety leadership is crucial in the administration of occupational health and safety and reducing turnover intention in organizations. PMID:27014486

77 FR 34123 - Pipeline Safety: Public Meeting on Integrity Management of Gas Distribution Pipelines

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-08

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2012-0100] Pipeline Safety: Public Meeting on Integrity Management of Gas Distribution Pipelines AGENCY: Office of Pipeline Safety, Pipeline and Hazardous Materials Safety Administration, DOT. ACTION...

Understanding middle managers' influence in implementing patient safety culture.

PubMed

Gutberg, Jennifer; Berta, Whitney

2017-08-22

The past fifteen years have been marked by large-scale change efforts undertaken by healthcare organizations to improve patient safety and patient-centered care. Despite substantial investment of effort and resources, many of these large-scale or "radical change" initiatives, like those in other industries, have enjoyed limited success - with practice and behavioural changes neither fully adopted nor ultimately sustained - which has in large part been ascribed to inadequate implementation efforts. Culture change to "patient safety culture" (PSC) is among these radical change initiatives, where results to date have been mixed at best. This paper responds to calls for research that focus on explicating factors that affect efforts to implement radical change in healthcare contexts, and focuses on PSC as the radical change implementation. Specifically, this paper offers a novel conceptual model based on Organizational Learning Theory to explain the ability of middle managers in healthcare organizations to influence patient safety culture change. We propose that middle managers can capitalize on their unique position between upper and lower levels in the organization and engage in 'ambidextrous' learning that is critical to implementing and sustaining radical change. This organizational learning perspective offers an innovative way of framing the mid-level managers' role, through both explorative and exploitative activities, which further considers the necessary organizational context in which they operate.

75 FR 17417 - Joint Meeting of the Arthritis Advisory Committee and the Drug Safety and Risk Management...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-06

...] Joint Meeting of the Arthritis Advisory Committee and the Drug Safety and Risk Management Advisory... Arthritis Advisory Committee and the Drug Safety and Risk Management Advisory Committee. This meeting was... Drug Safety and Risk Management Advisory Committee would be held on May 12, 2010. On page 10490, in the...

The effectiveness of workshops on management evaluation of traffic safety programs.

DOT National Transportation Integrated Search

1977-01-01

Nine management evaluation workshops based on The Evaluation of Highway Traffic Safety Programs' A Manual for Managers were held in various cities throughout the United States by the Office of Manpower Development (NHTSA). The analysis reported here ...

The Role of Labor-Management Committees in Safeguarding Worker Safety and Health.

ERIC Educational Resources Information Center

Ruttenberg, Ruth

There are thousands of labor-management committees for occupational safety and health in the United States. Most were established or activated after passage of the Occupational Safety and Health Act of 1970. Such committees can be an important tool when used as part of a comprehensive effort to achieve safety and health in the workplace. In the…

Measurement of worker perceptions of trust and safety climate in managers and supervisors at commercial grain elevators.

PubMed

Mosher, G A; Keren, N; Freeman, S A; Hurburgh, C R

2013-04-01

The safety climate of an agricultural workplace may be affected by several things, including the level of trust that workers have in their work group supervisor and organizational management. Safety climate has been used by previous safety researchers as a measure of worker perceptions of the relative importance of safety as compared with other operational goals. Trust has been linked to several positive safety outcomes, particularly in hazardous work environments, but has not been examined relative to safety climate in the perennially hazardous work environment of a commercial grain elevator. In this study, 177 workers at three Midwest grain elevator companies completed online surveys measuring their perceptions of trust and safety at two administrative levels: organizational management and work group supervisors. Positive and significant relationships were noted between trust and safety climate perceptions for organizational managers and for work group supervisors. Results from this research suggest that worker trust in organizational management and work group supervisors has a positive influence on the employees' perceptions of safety climate at the organizational and work group levels in an agricultural workplace.

The role of health and safety experts in the management of hazardous and toxic wastes in Indonesia

NASA Astrophysics Data System (ADS)

Supriyadi; Hadiyanto

2018-02-01

Occupational Safety and Health Experts in Indonesia have an important role in integrating environmental health and safety factors, including in this regard as human resources assigned to undertake hazardous waste management. Comprehensive knowledge and competence skills need to be carried out responsibly, as an inherent professional occupational safety and health profession. Management leaders should continue to provide training in external agencies responsible for science in the management of toxic waste to enable occupational safety and health experts to improve their performance in the hierarchy of control over the presence of hazardous materials. This paper provides an overview of what strategies and competencies the Occupational Safety and Health expert needs to have in embracing hazardous waste management practices.

75 FR 69912 - Pipeline Safety: Control Room Management/Human Factors

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-16

... 192 and 195 [Docket ID PHMSA-2007-27954] RIN 2137-AE64 Pipeline Safety: Control Room Management/Human... rulemaking; Extension of comment period. SUMMARY: On September 17, 2010, PHMSA published a Control Room... Control Room Management/Human Factors rule at 49 CFR 192.631 and 195.446. The NPRM proposes to expedite...

[Analysis of the safety culture in a Cardiology Unit managed by processes].

PubMed

Raso-Raso, Rafael; Uris-Selles, Joaquín; Nolasco-Bonmatí, Andreu; Grau-Jornet, Guillermo; Revert-Gandia, Rosa; Jiménez-Carreño, Rebeca; Sánchez-Soriano, Ruth M; Chamorro-Fernández, Carlos I; Marco-Francés, Elvira; Albero-Martínez, José V

2017-04-04

Safety culture is one of the requirements for preventing the occurrence of adverse effects. However, this has not been studied in the field of cardiology. The aim of this study is to evaluate the safety culture in a cardiology unit that has implemented and certified an integrated quality and risk management system for patient safety. A cross-sectional observational study was conducted in 2 consecutive years, with all staff completing the Spanish version of the questionnaire, "Hospital Survey on Patient Safety Culture" of the "Agency for Healthcare Research and Quality", with 42 items grouped into 12 dimensions. The percentage of positive responses in each dimension in 2014 and 2015 were compared, as well as national data and United States data, following the established rules. The overall assessment out of a possible 5, was 4.5 in 2014 and 4.7 in 2015. Seven dimensions were identified as strengths. The worst rated were: staffing, management support and teamwork between units. The comparison showed superiority in all dimensions compared to national data, and in 8 of them compared to American data. The safety culture in a Cardiology Unit with an integrated quality and risk management patient safety system is high, and higher than nationally in all its dimensions and in most of them compared to the United States. Copyright © 2017 Instituto Nacional de Cardiología Ignacio Chávez. Publicado por Masson Doyma México S.A. All rights reserved.

Occupational safety management: the role of causal attribution.

PubMed

Gyekye, Seth Ayim

2010-12-01

The paper addresses the causal attribution theory, an old and well-established theme in social psychology which denotes the everyday, commonsense explanations that people use to explain events and the world around them. The attribution paradigm is considered one of the most appropriate analytical tools for exploratory and descriptive studies in social psychology and organizational literature. It affords the possibility of describing accident processes as objectively as possible and with as much detail as possible. Causal explanations are vital to the formal analysis of workplace hazards and accidents, as they determine how organizations act to prevent accident recurrence. Accordingly, they are regarded as fundamental and prerequisite elements for safety management policies. The paper focuses primarily on the role of causal attributions in occupational and industrial accident analyses and implementation of safety interventions. It thus serves as a review of the contribution of attribution theory to occupational and industrial accidents. It comprises six sections. The first section presents an introduction to the classic attribution theories, and the second an account of the various ways in which the attribution paradigm has been applied in organizational settings. The third and fourth sections review the literature on causal attributions and demographic and organizational variables respectively. The sources of attributional biases in social psychology and how they manifest and are identified in the causal explanations for industrial and occupational accidents are treated in the fifth section. Finally, conclusion and recommendations are presented. The recommendations are particularly important for the reduction of workplace accidents and associated costs. The paper touches on the need for unbiased causal analyses, belief in the preventability of accidents, and the imperative role of management in occupational safety management.

[Design, implementation and evaluation of a management model of patient safety in hospitals in Catalonia, Spain].

PubMed

Saura, Rosa Maria; Moreno, Pilar; Vallejo, Paula; Oliva, Glòria; Alava, Fernando; Esquerra, Miquel; Davins, Josep; Vallès, Roser; Bañeres, Joaquim

2014-07-01

Since its inception in 2006, the Alliance for Patient Safety in Catalonia has played a major role in promoting and shaping a series of projects related to the strategy of the Ministry of Health, Social Services and Equality, for improving patient safety. One such project was the creation of functional units or committees of safety in hospitals in order to facilitate the management of patient safety. The strategy has been implemented in hospitals in Catalonia which were selected based on criteria of representativeness. The intervention was based on two lines of action, one to develop the model framework and the other for its development. Firstly the strategy for safety management based on EFQM (European Foundation for Quality Management) was defined with the development of standards, targets and indicators to implement security while the second part involved the introduction of tools, methodologies and knowledge to the management support of patient safety and risk prevention. The project was developed in four hospital areas considered higher risk, each assuming six goals for safety management. Some of these targets such as the security control panel or system of adverse event reporting were shared. 23 hospitals joined the project in Catalonia. Despite the different situations in each centre, high compliance was achieved in the development of the objectives. In each of the participating areas the security control panel was developed. Stable structures for safety management were established or strengthened. Training in patient safety played and important role, 1415 professionals participated. Through these kind of projects not only have been introduced programs of proven effectiveness in reducing risks, but they also provide to the facilities a work system that allows autonomy in diagnosis and analysis of the different risk situations or centre specific safety issues. Copyright © 2014. Published by Elsevier Espana.

Pesticide management approach towards protecting the safety and health of farmers in Southeast Asia.

PubMed

Mohammad, Norsyazwani; Abidin, Emilia Zainal; How, Vivien; Praveena, Sarva Mangala; Hashim, Zailina

2018-06-27

It is estimated that pesticide production and use have increased continuously in the countries of Southeast Asia in recent years. Within the context of protecting the safety and health of workers in the agricultural sector, there is an existing gap in the implementation of the pesticide management framework because safety and health effects arising from occupational exposures continue to be reported. This study aims to provide narrative similarities, differences and weaknesses of the existing pesticide management system in Southeast Asian countries (Brunei, Cambodia, Indonesia, Laos, Malaysia, Myanmar, Philippines, Singapore, Thailand and Vietnam) within the context of occupational safety and health. This is preliminary traditional review study. Pesticide regulation and management at the country level were identified using web-based search engines such as Scopus, ScienceDirect, PubMed and Google. Book, reports, legislation document and other documents retrieved were also gathered from international organizations and specific websites of governmental agency in Southeast Asian countries. The scope of this review is only limited to literature written in English. In total, 44 review articles, reports and documents were gathered for this study. The approach of pesticide management in protecting safety and health in the agricultural setting were benchmarked according to the elements introduced by the United States Environmental Protection Agency, namely, (1) the protection of workers and (2) the practice of safety. All countries have assigned a local authority and government organization to manage and control pesticide use in the agricultural sector. The countries with the highest usage of pesticide are Thailand, Philippines and Malaysia. Most Southeast Asian countries have emphasized safety practice in the management of pesticide usage, but there were less emphasis on the element of protection of workers within the framework in Indonesia, Myanmar, Thailand and Vietnam

[Problems of safety regulation under radioactive waste management in Russia].

PubMed

Monastyrskaia, S G; Kochetkov, O A; Barchukov, V G; Kuznetsova, L I

2012-01-01

Analysis of the requirements of Federal Law N 190 "About radioactive waste management and incorporation of changes into some legislative acts of the Russian Federation", as well as normative-legislative documents actual and planned to be published related to provision of radiation protection of the workers and the public have been done. Problems of safety regulation raised due to different approaches of Rospotrebnadzor, FMBA of Russia, Rostekhnadzor and Minprirody with respect to classification and categorization of the radioactive wastes, disposal, exemption from regulatory control, etc. have been discussed in the paper. Proposals regarding improvement of the system of safety regulation under radioactive waste management and of cooperation of various regulatory bodies have been formulated.

A red-flag-based approach to risk management of EHR-related safety concerns.

PubMed

Sittig, Dean F; Singh, Hardeep

2013-01-01

Although electronic health records (EHRs) have a significant potential to improve patient safety, EHR-related safety concerns have begun to emerge. Based on 369 responses to a survey sent to the memberships of the American Society for Healthcare Risk Management and the American Health Lawyers Association and supplemented by our previous work in EHR-related patient safety, we identified the following common EHR-related safety concerns: (1) incorrect patient identification; (2) extended EHR unavailability (either planned or unplanned); (3) failure to heed a computer-generated warning or alert; (4) system-to-system interface errors; (5) failure to identify, find, or use the most recent patient data; (6) misunderstandings about time; (7) incorrect item selected from a list of items; and (8) open or incomplete orders. In this article, we present a "red-flag"-based approach that can be used by risk managers to identify potential EHR safety concerns in their institutions. An organization that routinely conducts EHR-related surveillance activities, such as the ones proposed here, can significantly reduce risks associated with EHR implementation and use. © 2013 American Society for Healthcare Risk Management of the American Hospital Association.

Cytotoxic Drug Dispersal, Cytotoxic Safety, and Cytotoxic Waste Management: Practices and Proposed India-specific Guidelines

PubMed Central

Capoor, Malini R; Bhowmik, Kumar Tapas

2017-01-01

This article deals with practices related to cytotoxic drug dispersal, cytotoxic safety, and cytotoxic waste management and attempts at India-specific guidelines for their dispersal and disposal. The articles related to cytotoxic drug dispersal, cytotoxic safety, and cytotoxic waste management were reviewed from PubMed and their applicability in Indian health-care facilities (HCFs) was also reviewed. All HCFs dealing with cytotoxic drugs should consider cytotoxic policy, patient safety and health-care worker safety, and environmental monitoring program as per the available international guidelines customized as per Indian conditions. Utmost care in handling cytotoxic waste is quintessential. The formation of India-specific cytotoxic guidelines requires the inputs from all stakeholders. Cytotoxic waste, cytotoxic safety, and cytotoxic waste management should be the subject of a national strategy with an infrastructure, cradle-to-grave legislation, competent regulatory authority, and trained personnel. PMID:28900329

Taking up national safety alerts to improve patient safety in hospitals: The perspective of healthcare quality and risk managers.

PubMed

Pfeiffer, Yvonne; Schwappach, David

2016-01-01

National safety alert systems publish relevant information to improve patient safety in hospitals. However, the information has to be transformed into local action to have an effect on patient safety. We studied three research questions: How do Swiss healthcare quality and risk managers (qm/rm(1)) see their own role in learning from safety alerts issued by the Swiss national voluntary reporting and analysis system? What are their attitudes towards and evaluations of the alerts, and which types of improvement actions were fostered by the safety alerts? A survey was developed and applied to Swiss healthcare risk and quality managers, with a response rate of 39 % (n=116). Descriptive statistics are presented. The qm/rm disseminate and communicate with a broad variety of professional groups about the alerts. While most respondents felt that they should know the alerts and their contents, only a part of them felt responsible for driving organizational change based on the recommendations. However, most respondents used safety alerts to back up their own patient safety goals. The alerts were evaluated positively on various dimensions such as usefulness and were considered as standards of good practice by the majority of the respondents. A range of organizational responses was applied, with disseminating information being the most common. An active role is related to using safety alerts for backing up own patient safety goals. To support an active role of qm/rm in their hospital's learning from safety alerts, appropriate organizational structures should be developed. Furthermore, they could be given special information or training to act as an information hub on the issues discussed in the alerts. Copyright © 2016. Published by Elsevier GmbH.

Research on the management and endorsement of nuclear safety standards in the United States and its revelation for China

NASA Astrophysics Data System (ADS)

Liu, Ting; Tian, Yu; Yang, Lili; Gao, Siyi; Song, Dahu

2018-01-01

This paper introduces the American standard system, the Nuclear Regulatory Commission (NRC)’s responsibility, NRC nuclear safety regulations and standards system, studies on NRC’s standards management and endorsement mode, analyzes the characteristics of NRC standards endorsement management, and points out its disadvantages. This paper draws revelation from the standard management and endorsement model of NRC and points suggestion to China’s nuclear and radiation safety standards management.The issue of the “Nuclear Safety Law”plays an important role in China’s nuclear and radiation safety supervision. Nuclear and radiation safety regulations and standards are strong grips on the implementation of “Nuclear Safety Law”. This paper refers on the experience of international advanced countriy, will effectively promote the improvement of the endorsed management of China’s nuclear and radiation safety standards.

System safety management lessons learned from the US Army acquisition process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Piatt, J.A.

1989-05-01

The Assistant Secretary of the Army for Research, Development and Acquisition directed the Army Safety Center to provide an audit of the causes of accidents and safety of use restrictions on recently fielded systems by tracking residual hazards back through the acquisition process. The objective was to develop lessons learned'' that could be applied to the acquisition process to minimize mishaps in fielded systems. System safety management lessons learned are defined as Army practices or policies, derived from past successes and failures, that are expected to be effective in eliminating or reducing specific systemic causes of residual hazards. They aremore » broadly applicable and supportive of the Army structure and acquisition objectives. Pacific Northwest Laboratory (PNL) was given the task of conducting an independent, objective appraisal of the Army's system safety program in the context of the Army materiel acquisition process by focusing on four fielded systems which are products of that process. These systems included the Apache helicopter, the Bradley Fighting Vehicle (BFV), the Tube Launched, Optically Tracked, Wire Guided (TOW) Missile and the High Mobility Multipurpose Wheeled Vehicle (HMMWV). The objective of this study was to develop system safety management lessons learned associated with the acquisition process. The first step was to identify residual hazards associated with the selected systems. Since it was impossible to track all residual hazards through the acquisition process, certain well-known, high visibility hazards were selected for detailed tracking. These residual hazards illustrate a variety of systemic problems. Systemic or process causes were identified for each residual hazard and analyzed to determine why they exist. System safety management lessons learned were developed to address related systemic causal factors. 29 refs., 5 figs.« less

Safety in home care: A research protocol for studying medication management

PubMed Central

2010-01-01

Background Patient safety is an ongoing global priority, with medication safety considered a prevalent, high-risk area of concern. Yet, we have little understanding of the supports and barriers to safe medication management in the Canadian home care environment. There is a clear need to engage the providers and recipients of care in studying and improving medication safety with collaborative approaches to exploring the nature and safety of medication management in home care. Methods A socio-ecological perspective on health and health systems drives our iterative qualitative study on medication safety with elderly home care clients, family members and other informal caregivers, and home care providers. As we purposively sample across four Canadian provinces: Alberta (AB), Ontario (ON), Quebec (QC) and Nova Scotia (NS), we will collect textual and visual data through home-based interviews, participant-led photo walkabouts of the home, and photo elicitation sessions at clients' kitchen tables. Using successive rounds of interpretive description and human factors engineering analyses, we will generate robust descriptions of managing medication at home within each provincial sample and across the four-province group. We will validate our initial interpretations through photo elicitation focus groups with home care providers in each province to develop a refined description of the phenomenon that can inform future decision-making, quality improvement efforts, and research. Discussion The application of interpretive and human factors lenses to the visual and textual data is expected to yield findings that advance our understanding of the issues, challenges, and risk-mitigating strategies related to medication safety in home care. The images are powerful knowledge translation tools for sharing what we learn with participants, decision makers, other healthcare audiences, and the public. In addition, participants engage in knowledge exchange throughout the study with the use

On Building an Ontological Knowledge Base for Managing Patient Safety Events.

PubMed

Liang, Chen; Gong, Yang

2015-01-01

Over the past decade, improving healthcare quality and safety through patient safety event reporting systems has drawn much attention. Unfortunately, such systems are suffering from low data quality, inefficient data entry and ineffective information retrieval. For improving the systems, we develop a semantic web ontology based on the WHO International Classification for Patient Safety (ICPS) and AHRQ Common Formats for patient safety event reporting. The ontology holds potential in enhancing knowledge management and information retrieval, as well as providing flexible data entry and case analysis for both reporters and reviewers of patient safety events. In this paper, we detailed our efforts in data acquisition, transformation, implementation and initial evaluation of the ontology.

System safety education focused on flight safety

NASA Technical Reports Server (NTRS)

Holt, E.

1971-01-01

The measures necessary for achieving higher levels of system safety are analyzed with an eye toward maintaining the combat capability of the Air Force. Several education courses were provided for personnel involved in safety management. Data include: (1) Flight Safety Officer Course, (2) Advanced Safety Program Management, (3) Fundamentals of System Safety, and (4) Quantitative Methods of Safety Analysis.

Preliminary Assessment of Operational Hazards and Safety Requirements for Airborne Trajectory Management (ABTM) Roadmap Applications

NASA Technical Reports Server (NTRS)

Cotton, William B.; Hilb, Robert; Koczo, Stefan, Jr.; Wing, David J.

2016-01-01

A set of five developmental steps building from the NASA TASAR (Traffic Aware Strategic Aircrew Requests) concept are described, each providing incrementally more efficiency and capacity benefits to airspace system users and service providers, culminating in a Full Airborne Trajectory Management capability. For each of these steps, the incremental Operational Hazards and Safety Requirements are identified for later use in future formal safety assessments intended to lead to certification and operational approval of the equipment and the associated procedures. Two established safety assessment methodologies that are compliant with the FAA's Safety Management System were used leading to Failure Effects Classifications (FEC) for each of the steps. The most likely FEC for the first three steps, Basic TASAR, Digital TASAR, and 4D TASAR, is "No effect". For step four, Strategic Airborne Trajectory Management, the likely FEC is "Minor". For Full Airborne Trajectory Management (Step 5), the most likely FEC is "Major".

Liabilities and Responsibilities of the Construction Manager for Implementation and Management of the Safety Program.

DTIC Science & Technology

1987-12-01

acting as an agent of the owner, and the owner contracts directly with several prime or trade contractors. There are four different agreements associated...safety precautions and programs in connection with the project or for the construction manager’s obligations as the agent of the owner. AIA A201/CM...require the general contractor to exercise reasonable care for safety of the subcontractor’s employees. Owners and their agents must be careful that

Safety and Mission Assurance Knowledge Management Retention

NASA Technical Reports Server (NTRS)

Johnson, Teresa A.

2006-01-01

This viewgraph presentation reviews the issues surrounding the management of knowledge in regards to safety and mission assurance. The JSC workers who were hired in the 1960's are slated to retire in the next two to three years. The experiences and knowledge of these NASA workers must be identified, and disseminated. This paper reviews some of the strategies that the S&MA is developing to capture that valuable institutional knowledge.

Safe patient care - safety culture and risk management in otorhinolaryngology.

PubMed

St Pierre, Michael

2013-12-13

Safety culture is positioned at the heart of an organization's vulnerability to error because of its role in framing organizational awareness to risk and in providing and sustaining effective strategies of risk management. Safety related attitudes of leadership and management play a crucial role in the development of a mature safety culture ("top-down process"). A type marker for organizational culture and thus a predictor for an organization's maturity in respect to safety is information flow and in particular an organization's general way of coping with information that suggests anomaly. As all values and beliefs, relationships, learning, and other aspects of organizational safety culture are about sharing and processing information, safety culture has been termed "informed culture". An informed culture is free of blame and open for information provided by incidents. "Incident reporting systems" are the backbone of a reporting culture, where good information flow is likely to support and encourage other kinds of cooperative behavior, such as problem solving, innovation, and inter-departmental bridging. Another facet of an informed culture is the free flow of information during perioperative patient care. The World Health Organization's safe surgery checklist" is the most prevalent example of a standardized information exchange aimed at preventing patient harm due to information deficit. In routine tasks mandatory standard operating procedures have gained widespread acceptance in guaranteeing the highest possible process quality. Technical and non-technical skills of healthcare professionals are the decisive human resource for an efficient and safe delivery of patient care and the avoidance of errors. The systematic enhancement of staff qualification by providing training opportunities can be a major investment in patient safety. In recent years several otorhinolaryngology departments have started to incorporate stimulation based team trainings into their

[Safe patient care: safety culture and risk management in otorhinolaryngology].

PubMed

St Pierre, M

2013-04-01

Safety culture is positioned at the heart of an organisation's vulnerability to error because of its role in framing organizational awareness to risk and in providing and sustaining effective strategies of risk management. Safety related attitudes of leadership and management play a crucial role in the development of a mature safety culture ("top-down process"). A type marker for organizational culture and thus a predictor for an organizations maturity in respect to safety is information flow and in particular an organization's general way of coping with information that suggests anomaly. As all values and beliefs, relationships, learning, and other aspects of organizational safety culture are about sharing and processing information, safety culture has been termed "informed culture". An informed culture is free of blame and open for information provided by incidents. "Incident reporting systems" are the backbone of a reporting culture, where good information flow is likely to support and encourage other kinds of cooperative behavior, such as problem solving, innovation, and inter-departmental bridging. Another facet of an informed culture is the free flow of information during perioperative patient care. The World Health Organisation's "safe surgery checklist" is the most prevalent example of a standardized information exchange aimed at preventing patient harm due to information deficit. In routine tasks mandatory standard operating procedures have gained widespread acceptance in guaranteeing the highest possible process quality.Technical and non-technical skills of healthcare professionals are the decisive human resource for an efficient and safe delivery of patient care and the avoidance of errors. The systematic enhancement of staff qualification by providing training opportunities can be a major investment in patient safety. In recent years several otorhinolaryngology departments have started to incorporate simulation based team trainings into their curriculum

76 FR 23708 - Safety Zone; Pierce County Department of Emergency Management Regional Water Exercise, East...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-28

...-AA00 Safety Zone; Pierce County Department of Emergency Management Regional Water Exercise, East... the Regional Water Rescue Exercise. Basis and Purpose The Pierce County, Washington, Department of... to read as follows: Sec. 165.T13-0251 Safety Zone; Pierce County Department of Emergency Management...

Role of a quality management system in improving patient safety - laboratory aspects.

PubMed

Allen, Lynn C

2013-09-01

The aim of this study is to describe how implementation of a quality management system (QMS) based on ISO 15189 enhances patient safety. A literature review showed that several European hospitals implemented a QMS based on ISO 9001 and assessed the impact on patient safety. An Internet search showed that problems affecting patient safety have occurred in a number of laboratories across Canada. The requirements of a QMS based on ISO 15189 are outlined, and the impact of the implementation of each requirement on patient safety is summarized. The Quality Management Program - Laboratory Services in Ontario is briefly described, and the experience of Ontario laboratories with Ontario Laboratory Accreditation, based on ISO 15189, is outlined. Several hospitals that implemented ISO 9001 reported either a positive impact or no impact on patient safety. Patient safety problems in Canadian laboratories are described. Implementation of each requirement of the QMS can be seen to have a positive effect on patient safety. Average laboratory conformance on Ontario Laboratory Accreditation is very high, and laboratories must address and resolve any nonconformities. Other standards, practices, and quality requirements may also contribute to patient safety. Implementation of a QMS based on ISO 15189 provides a solid foundation for quality in the laboratory and enhances patient safety. It helps to prevent patient safety issues; when such issues do occur, effective processes are in place for investigation and resolution. Patient safety problems in Canadian laboratories might have been prevented had effective QMSs been in place. Ontario Laboratory Accreditation has had a positive impact on quality in Ontario laboratories. Copyright © 2013 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

[Blood transfusion and supply chain management safety].

PubMed

Quaranta, Jean-François; Caldani, Cyril; Cabaud, Jean-Jacques; Chavarin, Patricia; Rochette-Eribon, Sandrine

2015-02-01

The level of safety attained in blood transfusion now makes this a discipline better managed care activities. This was achieved both by scientific advances and policy decisions regulating and supervising the activity, as well as by the quality system, which we recall that affects the entire organizational structure, responsibilities, procedures, processes and resources in place to achieve quality management. So, an effective quality system provides a framework within which activities are established, performed in a quality-focused way and continuously monitored to improve outcomes. This system quality has to irrigate all the actors of the transfusion, just as much the establishments of blood transfusion than the health establishments. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

Comparison of AIHA ISO 9001-based occupational health and safety management system guidance document with a manufacturer's occupational health and safety assessment instrument.

PubMed

Dyjack, D T; Levine, S P; Holtshouser, J L; Schork, M A

1998-06-01

Numerous manufacturing and service organizations have integrated or are considering integration of their respective occupational health and safety management and audit systems into the International Organization for Standardization-based (ISO) audit-driven Quality Management Systems (ISO 9000) or Environmental Management Systems (ISO 14000) models. Companies considering one of these options will likely need to identify and evaluate several key factors before embarking on such efforts. The purpose of this article is to identify and address the key factors through a case study approach. Qualitative and quantitative comparisons of the key features of the American Industrial Hygiene Association ISO-9001 harmonized Occupational Health and Safety Management System with The Goodyear Tire & Rubber Co. management and audit system were conducted. The comparisons showed that the two management systems and their respective audit protocols, although structured differently, were not substantially statistically dissimilar in content. The authors recommend that future studies continue to evaluate the advantages and disadvantages of various audit protocols. Ideally, these studies would identify those audit outcome measures that can be reliably correlated with health and safety performance.

Improving the safety of remote site emergency airway management.

PubMed

Wijesuriya, Julian; Brand, Jonathan

2014-01-01

Airway management, particularly in non-theatre settings, is an area of anaesthesia and critical care associated with significant risk of morbidity & mortality, as highlighted during the 4th National Audit Project of the Royal College of Anaesthetists (NAP4). A survey of junior anaesthetists at our hospital highlighted a lack of confidence and perceived lack of safety in emergency airway management, especially in non-theatre settings. We developed and implemented a multifaceted airway package designed to improve the safety of remote site airway management. A Rapid Sequence Induction (RSI) checklist was developed; this was combined with new advanced airway equipment and drugs bags. Additionally, new carbon dioxide detector filters were procured in order to comply with NAP4 monitoring recommendations. The RSI checklists were placed in key locations throughout the hospital and the drugs and advanced airway equipment bags were centralised in the Intensive Care Unit (ICU). It was agreed with the senior nursing staff that an appropriately trained ICU nurse would attend all emergency situations with new airway resources upon request. Departmental guidelines were updated to include details of the new resources and the on-call anaesthetist's responsibilities regarding checks and maintenance. Following our intervention trainees reported higher confidence levels regarding remote site emergency airway management. Nine trusts within the Northern Region were surveyed and we found large variations in the provision of remote site airway management resources. Complications in remote site airway management due lack of available appropriate drugs, equipment or trained staff are potentially life threatening and completely avoidable. Utilising the intervention package an anaesthetist would be able to safely plan and prepare for airway management in any setting. They would subsequently have the drugs, equipment, and trained assistance required to manage any difficulties or complications

33 CFR 96.320 - What is involved to complete a safety management audit and when is it required to be completed?

Code of Federal Regulations, 2011 CFR

2011-07-01

... certificate or a Safety Management Certificate; (3) Periodic audits including— (i) An annual verification... safety management audit and when is it required to be completed? 96.320 Section 96.320 Navigation and... SAFE OPERATION OF VESSELS AND SAFETY MANAGEMENT SYSTEMS How Will Safety Management Systems Be...

Integrating environmental management into food safety and food packaging in Malaysia: review of the food regulation 1985

NASA Astrophysics Data System (ADS)

Nordin, N. H.; Hara, H.; Kaida, N.

2017-05-01

Food safety is an important issue that is related to public safety to prevent the toxicity threats of the food. Management through legal approach has been used in Malaysia as one of the predominant approaches to manage the environment. In this regard, the Food Regulation 1985 has been one of the mechanisms of environmental management through legal approach in controlling the safety of packaged food in food packaging industry in Malaysia. The present study aims to analyse and to explain the implementation of the Food Regulation 1985 in controlling the safety of packaged food in Malaysia and to integrate the concept of environmental management into the food safety issue. Qualitative analysis on the regulation document revealed that there are two main themes, general and specific, while their seven sub themes are included harmful packages, safety packages, reuse packages, polyvinyl chloride (PVC), alcoholic bottle, toys, money and others and iron powder. The implementation of the Food Regulation 1985 in controlling the safety of packaged food should not be regarded solely for regulation purposes but should be further developed for a broader sense of food safety from overcoming the food poisoning.

Work Pressure and Safety Behaviors among Health Workers in Ghana: The Moderating Role of Management Commitment to Safety.

PubMed

Amponsah-Tawaih, Kwesi; Adu, Michael Appiah

2016-12-01

safety and healthy working environment has received numerous research attention over the years. Majority of these researches seem to have been conducted in the construction industry, with little attention in the health sector. Nonetheless, there are couple of studies conducted in Africa that suggest pressure in hospitals. Therefore the aim of the study was to examine how pressure influence safety behavior in the hospitals. With reference to the relevance of safety behavior in primary health care delivery, there was the need for the study. Data was obtained from 422 public hospital employees. Respondents were assured that all information would be kept confidential to increase the response rate and acquire more accurate information. Collection of questionnaires from participants took four weeks (20 working days), after which the data was analyzed. The result of the study showed that work pressure correlated negatively with safety behavior. General safety climate significantly correlated positively with safety behavior and negatively with work pressure, although the effect size for the latter was smaller. Hierarchical regression analysis showed management commitment to safety to moderate the relationship between work pressure and safety behavior. When employees perceive safety communication, safety systems and training to be positive, they seem to comply with safety rules and procedures than voluntarily participate in safety activities.

Safety Management Status among Nurses Handling Anticancer Drugs: Nurse Awareness and Performance Following Safety Regulations.

PubMed

Jeong, Kyeong Weon; Lee, Bo-Young; Kwon, Myung Soon; Jang, Ji-Hye

2015-01-01

This study identified the actual conditions for safe anticancer drug management among nurses and the relationship between level of awareness and performance of anticancer drug safety regulations in terms of preparation, administration, and disposal. The respondents were 236 nurses working with chemotherapy in wards and outpatient clinics in five hospitals in and near Seoul. Safety regulations provided for the anticancer drug the Occupational Safety Health Administration (OSHA, 1999), as modified for an earlier study, were used. The results showed that the level of awareness and performance on the anticancer drug safety regulations indicate their preparation (3.38±0.55, 2.38±0.98), administration (3.52±0.46, 3.17±0.70), general handling and disposal (3.33±0.54, 2.42±0.90) on a scale 0 to 5. Also, there were significant differences in job positions, work experience, type of preparation, and continuing education and a positive relationship between the level of awareness and nursing performance. Thus, nurses should receive continuing education on the handling of anticancer drugs to improve the level of performance following safety regulations.

[Process management in the hospital pharmacy for the improvement of the patient safety].

PubMed

Govindarajan, R; Perelló-Juncá, A; Parès-Marimòn, R M; Serrais-Benavente, J; Ferrandez-Martí, D; Sala-Robinat, R; Camacho-Calvente, A; Campabanal-Prats, C; Solà-Anderiu, I; Sanchez-Caparrós, S; Gonzalez-Estrada, J; Martinez-Olalla, P; Colomer-Palomo, J; Perez-Mañosas, R; Rodríguez-Gallego, D

2013-01-01

To define a process management model for a hospital pharmacy in order to measure, analyse and make continuous improvements in patient safety and healthcare quality. In order to implement process management, Igualada Hospital was divided into different processes, one of which was the Hospital Pharmacy. A multidisciplinary management team was given responsibility for each process. For each sub-process one person was identified to be responsible, and a working group was formed under his/her leadership. With the help of each working group, a risk analysis using failure modes and effects analysis (FMEA) was performed, and the corresponding improvement actions were implemented. Sub-process indicators were also identified, and different process management mechanisms were introduced. The first risk analysis with FMEA produced more than thirty preventive actions to improve patient safety. Later, the weekly analysis of errors, as well as the monthly analysis of key process indicators, permitted us to monitor process results and, as each sub-process manager participated in these meetings, also to assume accountability and responsibility, thus consolidating the culture of excellence. The introduction of different process management mechanisms, with the participation of people responsible for each sub-process, introduces a participative management tool for the continuous improvement of patient safety and healthcare quality. Copyright © 2012 SECA. Published by Elsevier Espana. All rights reserved.

Labor unions and safety climate: perceived union safety values and retail employee safety outcomes.

PubMed

Sinclair, Robert R; Martin, James E; Sears, Lindsay E

2010-09-01

Although trade unions have long been recognized as a critical advocate for employee safety and health, safety climate research has not paid much attention to the role unions play in workplace safety. We proposed a multiple constituency model of workplace safety which focused on three central safety stakeholders: top management, ones' immediate supervisor, and the labor union. Safety climate research focuses on management and supervisors as key stakeholders, but has not considered whether employee perceptions about the priority their union places on safety contributes contribute to safety outcomes. We addressed this gap in the literature by investigating unionized retail employee (N=535) perceptions about the extent to which their top management, immediate supervisors, and union valued safety. Confirmatory factor analyses demonstrated that perceived union safety values could be distinguished from measures of safety training, workplace hazards, top management safety values, and supervisor values. Structural equation analyses indicated that union safety values influenced safety outcomes through its association with higher safety motivation, showing a similar effect as that of supervisor safety values. These findings highlight the need for further attention to union-focused measures related to workplace safety as well as further study of retail employees in general. We discuss the practical implications of our findings and identify several directions for future safety research. 2009 Elsevier Ltd. All rights reserved.

Improving diabetic foot care in a nurse-managed safety-net clinic.

PubMed

Peterson, Joann M; Virden, Mary D

2013-05-01

This article is a description of the development and implementation of a Comprehensive Diabetic Foot Care Program and assessment tool in an academically affiliated nurse-managed, multidisciplinary, safety-net clinic. The assessment tool parallels parameters identified in the Task Force Foot Care Interest Group of the American Diabetes Association's report published in 2008, "Comprehensive Foot Examination and Risk Assessment." Review of literature, Silver City Health Center's (SCHC) 2009 Annual Report, retrospective chart review. Since the full implementation of SCHC's Comprehensive Diabetic Foot Care Program, there have been no hospitalizations of clinic patients for foot-related complications. The development of the Comprehensive Diabetic Foot Assessment tool and the implementation of the Comprehensive Diabetic Foot Care Program have resulted in positive outcomes for the patients in a nurse-managed safety-net clinic. This article demonstrates that quality healthcare services can successfully be developed and implemented in a safety-net clinic setting. ©2012 The Author(s) Journal compilation ©2012 American Association of Nurse Practitioners.

Examination of the relationship between management and clinician perception of patient safety climate and patient satisfaction.

PubMed

Mazurenko, Olena; Richter, Jason; Kazley, Abby Swanson; Ford, Eric

2017-04-25

The aim of this study was to explore the relationship between managers and clinicians' agreement on deeming the patient safety climate as high or low and the patients' satisfaction with those organizations. We used two secondary data sets: the Hospital Survey on Patient Safety Culture (2012) and the Hospital Consumer Assessment of Healthcare Providers and Systems (2012). We used ordinary least squares regressions to analyze the relationship between the extent of agreement between managers and clinicians' perceptions of safety climate in relationship to patient satisfaction. The dependent variables were four Hospital Consumer Assessment of Healthcare Providers and Systems patient satisfaction scores: communication with nurses, communication with doctors, communication about medicines, and discharge information. The main independent variables were four groups that were formed based on the extent of managers and clinicians' agreement on four patient safety climate domains: communication openness, feedback and communication about errors, teamwork within units, and teamwork across units. After controlling for hospital and market-level characteristics, we found that patient satisfaction was significantly higher if managers and clinicians reported that patient safety climate is high or if only clinicians perceived the climate as high. Specifically, manager and clinician agreement on high levels of communication openness (β = 2.25, p = .01; β = 2.46, p = .05), feedback and communication about errors (β = 3.0, p = .001; β = 2.89, p = .01), and teamwork across units (β = 2.91, p = .001; β = 3.34, p = .01) was positively and significantly associated with patient satisfaction with discharge information and communication about medication. In addition, more favorable perceptions about patient safety climate by clinicians only yielded similar findings. Organizations should measure and examine patient safety climate from multiple perspectives and be aware that individuals

Aviation's Normal Operations Safety Audit: a safety management and educational tool for health care? Results of a small-scale trial.

PubMed

Bennett, Simon A

2017-01-01

A National Health Service (NHS) contingent liability for medical error claims of over £26 billion. To evaluate the safety management and educational benefits of adapting aviation's Normal Operations Safety Audit (NOSA) to health care. In vivo research, a NOSA was performed by medical students at an English NHS Trust. After receiving training from the author, the students spent 6 days gathering data under his supervision. The data revealed a threat-rich environment, where errors - some consequential - were made (359 threats and 86 errors were recorded over 2 weeks). The students claimed that the exercise improved their observational, investigative, communication, teamworking and other nontechnical skills. NOSA is potentially an effective safety management and educational tool for health care. It is suggested that 1) the UK General Medical Council mandates that all medical students perform a NOSA in fulfillment of their degree; 2) the participating NHS Trusts be encouraged to act on students' findings; and 3) the UK Department of Health adopts NOSA as a cornerstone risk assessment and management tool.

Microbiological performance of a food safety management system in a food service operation.

PubMed

Lahou, E; Jacxsens, L; Daelman, J; Van Landeghem, F; Uyttendaele, M

2012-04-01

The microbiological performance of a food safety management system in a food service operation was measured using a microbiological assessment scheme as a vertical sampling plan throughout the production process, from raw materials to final product. The assessment scheme can give insight into the microbiological contamination and the variability of a production process and pinpoint bottlenecks in the food safety management system. Three production processes were evaluated: a high-risk sandwich production process (involving raw meat preparation), a medium-risk hot meal production process (starting from undercooked raw materials), and a low-risk hot meal production process (reheating in a bag). Microbial quality parameters, hygiene indicators, and relevant pathogens (Listeria monocytogenes, Salmonella, Bacillus cereus, and Escherichia coli O157) were in accordance with legal criteria and/or microbiological guidelines, suggesting that the food safety management system was effective. High levels of total aerobic bacteria (>3.9 log CFU/50 cm(2)) were noted occasionally on gloves of food handlers and on food contact surfaces, especially in high contamination areas (e.g., during handling of raw material, preparation room). Core control activities such as hand hygiene of personnel and cleaning and disinfection (especially in highly contaminated areas) were considered points of attention. The present sampling plan was used to produce an overall microbiological profile (snapshot) to validate the food safety management system in place.

A Comprehensive Approach to Managing School Safety: Case Studies in Catalonia, Spain

ERIC Educational Resources Information Center

Díaz-Vicario, Anna; Gairín Sallán, Joaquín

2017-01-01

Background: Schools should be safe spaces for students, teaching staff and non-teaching staff. For the concept of "safety" to be meaningful, it must be interpreted broadly to encompass well-being in its widest sense. A common challenge for schools and educational authorities is, therefore, to manage school safety appropriately not only…

Evaluation of the Quality of Occupational Health and Safety Management Systems Based on Key Performance Indicators in Certified Organizations.

PubMed

Mohammadfam, Iraj; Kamalinia, Mojtaba; Momeni, Mansour; Golmohammadi, Rostam; Hamidi, Yadollah; Soltanian, Alireza

2017-06-01

Occupational Health and Safety Management Systems are becoming more widespread in organizations. Consequently, their effectiveness has become a core topic for researchers. This paper evaluates the performance of the Occupational Health and Safety Assessment Series 18001 specification in certified companies in Iran. The evaluation is based on a comparison of specific criteria and indictors related to occupational health and safety management practices in three certified and three noncertified companies. Findings indicate that the performance of certified companies with respect to occupational health and safety management practices is significantly better than that of noncertified companies. Occupational Health and Safety Assessment Series 18001-certified companies have a better level of occupational health and safety; this supports the argument that Occupational Health and Safety Management Systems play an important strategic role in health and safety in the workplace.

Linking better shiftwork arrangements with safety and health management systems.

PubMed

Kogi, Kazutaka

2004-12-01

Various support measures useful for promoting joint change approaches to the improvement of both shiftworking arrangements and safety and health management systems were reviewed. A particular focus was placed on enterprise-level risk reduction measures linking working hours and management systems. Voluntary industry-based guidelines on night and shift work for department stores and the chemical, automobile and electrical equipment industries were examined. Survey results that had led to the compilation of practicable measures to be included in these guidelines were also examined. The common support measures were then compared with ergonomic checkpoints for plant maintenance work involving irregular nightshifts. On the basis of this analysis, a new night and shift work checklist was designed. Both the guidelines and the plant maintenance work checkpoints were found to commonly cover multiple issues including work schedules and various job-related risks. This close link between shiftwork arrangements and risk management was important as shiftworkers in these industries considered teamwork and welfare services to be essential for managing risks associated with night and shift work. Four areas found suitable for participatory improvement by managers and workers were work schedules, ergonomic work tasks, work environment and training. The checklist designed to facilitate participatory change processes covered all these areas. The checklist developed to describe feasible workplace actions was suitable for integration with comprehensive safety and health management systems and offered valuable opportunities for improving working time arrangements and job content together.

Assessing the Food Safety Attitudes and Awareness of Managers of School Feeding Programmes in Mpumalanga, South Africa.

PubMed

Sibanyoni, J J; Tabit, F T

2017-08-01

The managers of school feeding programmes are responsible for ensuring the safety of the food which is provided to schoolchildren, but very few studies have been conducted on the food safety knowledge and awareness of these managers. The objective of this study is to evaluate the food safety attitudes and awareness of managers of the National School Nutrition Programme (NSNP) in schools in Mpumalanga, a province of South Africa. A cross-sectional survey study was conducted in which questionnaires were used to collect data from 300 NSNP food service managers. The majority of schools offering NSNP meals were located in informal settlements and most were found to lack basic resources such as electricity (power supplies to the food preparation facility) and potable tap water in their kitchens. No school was found to have implemented the hazard analysis and critical control points (HACCP) programme, and only a few staff had received food safety training. Food safety implementation is worst in informal schools in rural areas due to limited resources and infrastructure. The NSNP food service managers in some schools-especially those located in rural settlements-were found to have little knowledge and awareness of HACCP. These results indicate an urgent need to provide NSNP managers with food safety training and resources (potable water supplies, electricity, dedicated food preparation facilities), particularly in schools in rural settlements.

Development of a Universal Safety Behavior Management System for Coal Mine Workers

PubMed Central

LI, Jizu; LI, Yuejiao; LIU, Xiaoguang

2015-01-01

Background: In China, over 80% of all work-related deaths in the mining industry occur in coal mines and human factors constitute 85% of the direct causes of coal mine accidents, which indicates that significant shortcomings currently exist in the safety behavior management of Chinese coal mine workers. We aimed to verify the impact of human psychological behavior in coal mine accidents systematically through experimental study, theoretical analysis and management application. Methods: Four test instruments (Sensory and cognitive capacity test, Sixteen-Personal Factor Questionnaire, Symptom Checklist 90 Questionnaire and the supervisors’ evaluation) were employed from November 2013 to June 2014 to identify unsafe behavior factors, the self-established Questionnaire of Safety Behavior Norms (QSBN) was also used to propose the safety behavior countermeasures of coal mine employees. Results: The mental health of most coal mine workers’ is relatively poor. The sensory and cognitive capacity of those in different work posts varies greatly, as does the sense of responsibility. Workers are susceptible to external influences, and score low in site management. When the 16-PF and SCL-90 sensory and cognitive assessments were combined, the psychological index predictive power was greatest for estimating sense of efficiency and degree of satisfaction in internal evaluations, while at the same time lowest for estimating control of introversion-extroversion and stress character. Conclusion: The psychological indicators can predict part of employee safety behavior, and assist a coal mine enterprise to recruit staff, develop occupational safety norms and improve the working environment. PMID:26258088

A model of Occupational Safety and Health Management System (OSHMS) for promoting and controlling health and safety in textile industry.

PubMed

Manimaran, S; Rajalakshmi, R; Bhagyalakshmi, K

2015-01-01

The development of Occupational Safety and Health Management System in textile industry will rejuvenate the workers and energize the economy as a whole. In India, especially in Tamil Nadu, approximately 1371 textile business is running with the help of 38,461 workers under Ginning, Spinning, Weaving, Garment and Dyeing sectors. Textile industry of contributes to the growth of Indian economy but it fails to foster education and health as key components of human development and help new democracies. The present work attempts to measure and develop OSHMS which reduce the hazards and risk involved in textile industry. Among all other industries textile industry is affected by enormous hazards and risk because of negligence by management and Government. It is evident that managements are not abiding by law when an accident has occurred. Managements are easily deceiving workers and least bothered about the Quality of Work Life (QWL). A detailed analysis of factors promoting safety and health to the workers has been done by performing confirmatory factor analysis, evaluating Risk Priority Number and the framework of OHMS has been conceptualized using Structural Equation Model. The data have been collected using questionnaire and interview method. The study finds occupation health for worker in Textile industry is affected not only by safety measure but also by technology and management. The work shows that difficulty in identifying the cause and effect of hazards, the influence of management in controlling and promoting OSHMS under various dimensions. One startling fact is existence of very low and insignificance correlation between health factors and outcome.

Roy's safety-first portfolio principle in financial risk management of disastrous events.

PubMed

Chiu, Mei Choi; Wong, Hoi Ying; Li, Duan

2012-11-01

Roy pioneers the concept and practice of risk management of disastrous events via his safety-first principle for portfolio selection. More specifically, his safety-first principle advocates an optimal portfolio strategy generated from minimizing the disaster probability, while subject to the budget constraint and the mean constraint that the expected final wealth is not less than a preselected disaster level. This article studies the dynamic safety-first principle in continuous time and its application in asset and liability management. We reveal that the distortion resulting from dropping the mean constraint, as a common practice to approximate the original Roy's setting, either leads to a trivial case or changes the problem nature completely to a target-reaching problem, which produces a highly leveraged trading strategy. Recognizing the ill-posed nature of the corresponding Lagrangian method when retaining the mean constraint, we invoke a wisdom observed from a limited funding-level regulation of pension funds and modify the original safety-first formulation accordingly by imposing an upper bound on the funding level. This model revision enables us to solve completely the safety-first asset-liability problem by a martingale approach and to derive an optimal policy that follows faithfully the spirit of the safety-first principle and demonstrates a prominent nature of fighting for the best and preventing disaster from happening. © 2012 Society for Risk Analysis.

Underlying influence of perception of management leadership on patient safety climate in healthcare organizations - A mediation analysis approach.

PubMed

Weng, Shao-Jen; Kim, Seung-Hwan; Wu, Chieh-Liang

2017-02-01

We aim to draw insights on how medical staff's perception of management leadership affects safety climate with key safety related dimensions-teamwork climate, job satisfaction and working conditions. A cross-sectional survey using Safety Attitude Questionnaire (SAQ) was performed in a medical center in Taichung City, Taiwan. The relationships among the dimensions in SAQ were then analyzed by structural equation modeling with a mediation analysis. 2205 physicians and nurses of the medical center participated in the survey. Because not all questions in the survey are suitable for entire hospital staff, only the valid responses (n = 1596, response rate of 72%) were extracted for analysis. Key measures are the direct and indirect effects of teamwork climate, job satisfaction, perception of management leadership, and working conditions on safety climate. Outcomes show that effect of perception of management leadership on safety climate is significant (standardized indirect effect of 0.892 with P-value 0.002) and fully mediated by other dimensions, where 66.9% is mediated through teamwork climate, 24.1% through working conditions and 9.0% through job satisfaction. Our findings point to the importance of management leadership and the mechanism of its influence on safety climate. To improve safety climate, the implication is that commitment by management on leading safety improvement needs to be demonstrated when it implements daily supportive actions for other safety dimensions. For future improvement, development of a management system that can facilitate two-way trust between management and staff over the long term is recommended. © The Author 2016. Published by Oxford University Press in association with the International Society for Quality in Health Care. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

Risk Management: Earning Recognition with an Automated Safety Program

ERIC Educational Resources Information Center

Lansberry, Linden; Strasburger, Tom

2012-01-01

Risk management is a huge task that requires diligent oversight to avoid penalties, fines, or lawsuits. Add in the burden of limited resources that schools face today, and the challenge of meeting the required training, reporting, compliance, and other administrative issues associated with a safety program is almost insurmountable. Despite an…

Individual employee's perceptions of " Group-level Safety Climate" (supervisor referenced) versus " Organization-level Safety Climate" (top management referenced): Associations with safety outcomes for lone workers.

PubMed

Huang, Yueng-Hsiang; Lee, Jin; McFadden, Anna C; Rineer, Jennifer; Robertson, Michelle M

2017-01-01

Research has shown that safety climate is among the strongest predictors of safety behavior and safety outcomes in a variety of settings. Previous studies have established that safety climate is a multi-faceted construct referencing multiple levels of management within a company, most generally: the organization level (employee perceptions of top management's commitment to and prioritization of safety) and group level (employee perceptions of direct supervisor's commitment to and prioritization of safety). Yet, no research to date has examined the potential interaction between employees' organization-level safety climate (OSC) and group-level safety climate (GSC) perceptions. Furthermore, prior research has mainly focused on traditional work environments in which supervisors and workers interact in the same location throughout the day. Little research has been done to examine safety climate with regard to lone workers. The present study aims to address these gaps by examining the relationships between truck drivers' (as an example of lone workers) perceptions of OSC and GSC, both potential linear and non-linear relationships, and how these predict important safety outcomes. Participants were 8095 truck drivers from eight trucking companies in the United States with an average response rate of 44.8%. Results showed that employees' OSC and GSC perceptions are highly correlated (r= 0.78), but notable gaps between the two were observed for some truck drivers. Uniquely, both OSC and GSC scores were found to have curvilinear relationships with safe driving behavior, and both scores were equally predictive of safe driving behavior. Results also showed the two levels of climate significantly interacted with one another to predict safety behavior such that if either the OSC or GSC scores were low, the other's contribution to safety behavior became stronger. These findings suggest that OSC and GSC may function in a compensatory manner and promote safe driving behavior even

Where the Safety Rubber Meets the Shop Floor: A Confirmatory Model of Management Influence on Workplace Safety.

DOT National Transportation Integrated Search

1997-03-01

The role of management in establishing a safe work environment remains a topic that receives less attention in the literature than it deserves. Many authors have focused on safety programs and associated indications of program effects. Prescriptive a...

Management system of health and safety work (SMK3) with job safety analysis (JSA) in PT. Nira Murni construction

NASA Astrophysics Data System (ADS)

Melliana, Armen, Yusrizal, Akmal, Syarifah

2017-11-01

PT Nira Murni construction is a contractor of PT Chevron Pacific Indonesia which engaged in contractor, fabrication, maintenance construction suppliers, and labor services. The high of accident rate in this company is caused the lack of awareness of workplace safety. Therefore, it requires an effort to reduce the accident rate on the company so that the financial losses can be minimized. In this study, Safe T-Score method is used to analyze the accident rate by measuring the level of frequency. Analysis is continued using risk management methods which identify hazards, risk measurement and risk management. The last analysis uses Job safety analysis (JSA) which will identify the effect of accidents. From the result of this study can be concluded that Job Safety Analysis (JSA) methods has not been implemented properly. Therefore, JSA method needs to follow-up in the next study, so that can be well applied as prevention of occupational accidents.

Safety in psychiatric inpatient care: The impact of risk management culture on mental health nursing practice.

PubMed

Slemon, Allie; Jenkins, Emily; Bungay, Vicky

2017-10-01

The discourse of safety has informed the care of individuals with mental illness through institutionalization and into modern psychiatric nursing practices. Confinement arose from safety: out of both societal stigma and fear for public safety, as well as benevolently paternalistic aims to protect individuals from self-harm. In this paper, we argue that within current psychiatric inpatient environments, safety is maintained as the predominant value, and risk management is the cornerstone of nursing care. Practices that accord with this value are legitimized and perpetuated through the safety discourse, despite evidence refuting their efficacy, and patient perspectives demonstrating harm. To illustrate this growing concern in mental health nursing care, we provide four exemplars of risk management strategies utilized in psychiatric inpatient settings: close observations, seclusion, door locking and defensive nursing practice. The use of these strategies demonstrates the necessity to shift perspectives on safety and risk in nursing care. We suggest that to re-centre meaningful support and treatment of clients, nurses should provide individualized, flexible care that incorporates safety measures while also fundamentally re-evaluating the risk management culture that gives rise to and legitimizes harmful practices. © 2017 The Authors Nursing Inquiry published by John Wiley & Sons Ltd.

National Safety Council

MedlinePlus

... Safety Management Systems Workplace Safety Consulting Employee Perception Surveys Research Journey to Safety Excellence Join the Journey What ... Safety Management Systems Workplace Safety Consulting Employee Perception Surveys Research Journey to Safety Excellence Join the Journey What ...

[Endorsement of risk management and patient safety by certification of conformity in health care quality assessment].

PubMed

Waßmuth, Ralf

2015-01-01

Certification of conformity in health care should provide assurance of compliance with quality standards. This also includes risk management and patient safety. Based on a comprehensive definition of quality, beneficial effects on the management of risks and the enhancement of patient safety can be expected from certification of conformity. While these effects have strong face validity, they are currently not sufficiently supported by evidence from health care research. Whether this relates to a lack of evidence or a lack of investigation remains open. Advancing safety culture and "climate", as well as learning from adverse events rely in part on quality management and are at least in part reflected in the certification of healthcare quality. However, again, evidence of the effectiveness of such measures is limited. Moreover, additional factors related to personality, attitude and proactive action of healthcare professionals are crucial factors in advancing risk management and patient safety which are currently not adequately reflected in certification of conformity programs.

Safety management practices in small and medium enterprises in India.

PubMed

Unnikrishnan, Seema; Iqbal, Rauf; Singh, Anju; Nimkar, Indrayani M

2015-03-01

Small and medium enterprises (SMEs) are often the main pillar of an economy. Minor accidents, ergonomics problems, old and outdated machinery, and lack of awareness have created a need for implementation of safety practices in SMEs. Implementation of healthy working conditions creates positive impacts on economic and social development. In this study, a questionnaire was developed and administered to 30 randomly chosen SMEs in and around Mumbai, Maharashtra, and other states in India to evaluate safety practices implemented in their facilities. The study also looked into the barriers and drivers for technology innovation and suggestions were also received from the respondent SMEs for best practices on safety issues. In some SMEs, risks associated with safety issues were increased whereas risks were decreased in others. Safety management practices are inadequate in most SMEs. Market competitiveness, better efficiency, less risk, and stringent laws were found to be most significant drivers; and financial constraints, lack of awareness, resistance to change, and lack of training for employees were found to be main barriers. Competition between SMEs was found to be major reason for implementation of safety practices in the SMEs. The major contribution of the study has been awareness building on safety issues in the SMEs that participated in the project.

Safety Management Practices in Small and Medium Enterprises in India

PubMed Central

Unnikrishnan, Seema; Iqbal, Rauf; Singh, Anju; Nimkar, Indrayani M.

2014-01-01

Background Small and medium enterprises (SMEs) are often the main pillar of an economy. Minor accidents, ergonomics problems, old and outdated machinery, and lack of awareness have created a need for implementation of safety practices in SMEs. Implementation of healthy working conditions creates positive impacts on economic and social development. Methods In this study, a questionnaire was developed and administered to 30 randomly chosen SMEs in and around Mumbai, Maharashtra, and other states in India to evaluate safety practices implemented in their facilities. The study also looked into the barriers and drivers for technology innovation and suggestions were also received from the respondent SMEs for best practices on safety issues. Results In some SMEs, risks associated with safety issues were increased whereas risks were decreased in others. Safety management practices are inadequate in most SMEs. Market competitiveness, better efficiency, less risk, and stringent laws were found to be most significant drivers; and financial constraints, lack of awareness, resistance to change, and lack of training for employees were found to be main barriers. Conclusion Competition between SMEs was found to be major reason for implementation of safety practices in the SMEs. The major contribution of the study has been awareness building on safety issues in the SMEs that participated in the project. PMID:25830070

Fluor Daniel Hanford Inc. integrated safety management system phase 1 verification final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

PARSONS, J.E.

1999-10-28

The purpose of this review is to verify the adequacy of documentation as submitted to the Approval Authority by Fluor Daniel Hanford, Inc. (FDH). This review is not only a review of the Integrated Safety Management System (ISMS) System Description documentation, but is also a review of the procedures, policies, and manuals of practice used to implement safety management in an environment of organizational restructuring. The FDH ISMS should support the Hanford Strategic Plan (DOE-RL 1996) to safely clean up and manage the site's legacy waste; deploy science and technology while incorporating the ISMS theme to ''Do work safely''; andmore » protect human health and the environment.« less

Evaluating SafeClub: can risk management training improve the safety activities of community soccer clubs?

PubMed

Abbott, K; Klarenaar, P; Donaldson, A; Sherker, S

2008-06-01

To evaluate a sports safety-focused risk-management training programme. Controlled before and after test. Four community soccer associations in Sydney, Australia. 76 clubs (32 intervention, 44 control) at baseline, and 67 clubs (27 intervention, 40 control) at post-season and 12-month follow-ups. SafeClub, a sports safety-focused risk-management training programme (3x2 hour sessions) based on adult-learning principles and injury-prevention concepts and models. Changes in mean policy, infrastructure and overall safety scores as measured using a modified version of the Sports Safety Audit Tool. There was no significant difference in the mean policy, infrastructure and overall safety scores of intervention and control clubs at baseline. Intervention clubs achieved higher post-season mean policy (11.9 intervention vs 7.5 controls), infrastructure (15.2 vs 10.3) and overall safety (27.0 vs 17.8) scores than did controls. These differences were greater at the 12-month follow-up: policy (16.4 vs 7.6); infrastructure (24.7 vs 10.7); and overall safety (41.1 vs 18.3). General linear modelling indicated that intervention clubs achieved statistically significantly higher policy (p<0.001), infrastructure (p<0.001) and overall safety (p<0.001) scores compared with control clubs at the post-season and 12-month follow-ups. There was also a significant linear interaction of time and group for all three scores: policy (p<0.001), infrastructure (p<0.001) and overall safety (p<0.001). SafeClub effectively assisted community soccer clubs to improve their sports safety activities, particularly the foundations and processes for good risk-management practice, in a sustainable way.

[Road map for health and safety management systems in healthcare facilities, according to the OHSAS 18001:2007 standard].

PubMed

Pugliese, F; Albini, E; Serio, O; Apostoli, P

2011-01-01

The 81/2008 Act has defined a model of a health and safety management system that can contribute to prevent the occupational health and safety risks. We have developed the structure of a health and safety management system model and the necessary tools for its implementation in health care facilities. The realization of a model is structured in various phases: initial review, safety policy, planning, implementation, monitoring, management review and continuous improvement. Such a model, in continuous evolution, is based on the responsibilities of the different corporate characters and on an accurate analysis of risks and involved norms.

Aviation’s Normal Operations Safety Audit: a safety management and educational tool for health care? Results of a small-scale trial

PubMed Central

Bennett, Simon A

2017-01-01

Background A National Health Service (NHS) contingent liability for medical error claims of over £26 billion. Objectives To evaluate the safety management and educational benefits of adapting aviation’s Normal Operations Safety Audit (NOSA) to health care. Methods In vivo research, a NOSA was performed by medical students at an English NHS Trust. After receiving training from the author, the students spent 6 days gathering data under his supervision. Results The data revealed a threat-rich environment, where errors – some consequential – were made (359 threats and 86 errors were recorded over 2 weeks). The students claimed that the exercise improved their observational, investigative, communication, teamworking and other nontechnical skills. Conclusion NOSA is potentially an effective safety management and educational tool for health care. It is suggested that 1) the UK General Medical Council mandates that all medical students perform a NOSA in fulfillment of their degree; 2) the participating NHS Trusts be encouraged to act on students’ findings; and 3) the UK Department of Health adopts NOSA as a cornerstone risk assessment and management tool. PMID:28860881

A site of communication among enterprises for supporting occupational health and safety management system.

PubMed

Velonakis, E; Mantas, J; Mavrikakis, I

2006-01-01

The occupational health and safety management constitutes a field of increasing interest. Institutions in cooperation with enterprises make synchronized efforts to initiate quality management systems to this field. Computer networks can offer such services via TCP/IP which is a reliable protocol for workflow management between enterprises and institutions. A design of such network is based on several factors in order to achieve defined criteria and connectivity with other networks. The network will be consisted of certain nodes responsible to inform executive persons on Occupational Health and Safety. A web database has been planned for inserting and searching documents, for answering and processing questionnaires. The submission of files to a server and the answers to questionnaires through the web help the experts to make corrections and improvements on their activities. Based on the requirements of enterprises we have constructed a web file server. We submit files in purpose users could retrieve the files which need. The access is limited to authorized users and digital watermarks authenticate and protect digital objects. The Health and Safety Management System follows ISO 18001. The implementation of it, through the web site is an aim. The all application is developed and implemented on a pilot basis for the health services sector. It is all ready installed within a hospital, supporting health and safety management among different departments of the hospital and allowing communication through WEB with other hospitals.

Managing Quality and Safety in Real Time? Evidence from an Interview Study.

PubMed

Randell, Rebecca; Keen, Justin; Gates, Cara; Ferguson, Emma; Long, Andrew; Ginn, Claire; McGinnis, Elizabeth; Whittle, Jackie

2016-01-01

Health systems around the world are investing increasing effort in monitoring care quality and safety. Dashboards can support this process, providing summary data on processes and outcomes of care, making use of data visualization techniques such as graphs. As part of a study exploring development and use of dashboards in English hospitals, we interviewed senior managers across 15 healthcare providers. Findings revealed substantial variation in sophistication of the dashboards in place, largely presenting retrospective data items determined by national bodies and dependent on manual collation from a number of systems. Where real time systems were in place, they supported staff in proactively managing quality and safety.

Collaborative Approaches in Developing Environmental and Safety Management Systems for Commercial Space Transportation

NASA Technical Reports Server (NTRS)

Zee, Stacey; Murray, D.

2009-01-01

The Federal Aviation Administration (FAA), Office of Commercial Space Transportation (AST) licenses and permits U.S. commercial space launch and reentry activities, and licenses the operation of non-federal launch and reentry sites. ASTs mission is to ensure the protection of the public, property, and the national security and foreign policy interests of the United States during commercial space transportation activities and to encourage, facilitate, and promote U.S. commercial space transportation. AST faces unique challenges of ensuring the protection of public health and safety while facilitating and promoting U.S. commercial space transportation. AST has developed an Environmental Management System (EMS) and a Safety Management System (SMS) to help meet its mission. Although the EMS and SMS were developed independently, the systems share similar elements. Both systems follow a Plan-Do-Act-Check model in identifying potential environmental aspects or public safety hazards, assessing significance in terms of severity and likelihood of occurrence, developing approaches to reduce risk, and verifying that the risk is reduced. This paper will describe the similarities between ASTs EMS and SMS elements and how AST is building a collaborative approach in environmental and safety management to reduce impacts to the environment and risks to the public.

A Semantic Approach with Decision Support for Safety Service in Smart Home Management

PubMed Central

Huang, Xiaoci; Yi, Jianjun; Zhu, Xiaomin; Chen, Shaoli

2016-01-01

Research on smart homes (SHs) has increased significantly in recent years because of the convenience provided by having an assisted living environment. The functions of SHs as mentioned in previous studies, particularly safety services, are seldom discussed or mentioned. Thus, this study proposes a semantic approach with decision support for safety service in SH management. The focus of this contribution is to explore a context awareness and reasoning approach for risk recognition in SH that enables the proper decision support for flexible safety service provision. The framework of SH based on a wireless sensor network is described from the perspective of neighbourhood management. This approach is based on the integration of semantic knowledge in which a reasoner can make decisions about risk recognition and safety service. We present a management ontology for a SH and relevant monitoring contextual information, which considers its suitability in a pervasive computing environment and is service-oriented. We also propose a rule-based reasoning method to provide decision support through reasoning techniques and context-awareness. A system prototype is developed to evaluate the feasibility, time response and extendibility of the approach. The evaluation of our approach shows that it is more effective in daily risk event recognition. The decisions for service provision are shown to be accurate. PMID:27527170

A Semantic Approach with Decision Support for Safety Service in Smart Home Management.

PubMed

Huang, Xiaoci; Yi, Jianjun; Zhu, Xiaomin; Chen, Shaoli

2016-08-03

Research on smart homes (SHs) has increased significantly in recent years because of the convenience provided by having an assisted living environment. The functions of SHs as mentioned in previous studies, particularly safety services, are seldom discussed or mentioned. Thus, this study proposes a semantic approach with decision support for safety service in SH management. The focus of this contribution is to explore a context awareness and reasoning approach for risk recognition in SH that enables the proper decision support for flexible safety service provision. The framework of SH based on a wireless sensor network is described from the perspective of neighbourhood management. This approach is based on the integration of semantic knowledge in which a reasoner can make decisions about risk recognition and safety service. We present a management ontology for a SH and relevant monitoring contextual information, which considers its suitability in a pervasive computing environment and is service-oriented. We also propose a rule-based reasoning method to provide decision support through reasoning techniques and context-awareness. A system prototype is developed to evaluate the feasibility, time response and extendibility of the approach. The evaluation of our approach shows that it is more effective in daily risk event recognition. The decisions for service provision are shown to be accurate.

Design and evaluation of simulation scenarios for a program introducing patient safety, teamwork, safety leadership, and simulation to healthcare leaders and managers.

PubMed

Cooper, Jeffrey B; Singer, Sara J; Hayes, Jennifer; Sales, Michael; Vogt, Jay W; Raemer, Daniel; Meyer, Gregg S

2011-08-01

We developed a training program to introduce managers and informal leaders of healthcare organizations to key concepts of teamwork, safety leadership, and simulation to motivate them to act as leaders to improve safety within their sphere of influence. This report describes the simulation scenario and debriefing that are core elements of that program. Twelve teams of clinician and nonclinician managers were selected from a larger set of volunteers to participate in a 1-day, multielement training program. Two simulation exercises were developed: one for teams of nonclinicians and the other for clinicians or mixed groups. The scenarios represented two different clinical situations, each designed to engage participants in discussions of their safety leadership and teamwork issues immediately after the experience. In the scenarios for nonclinicians, participants conducted an anesthetic induction and then managed an ethical situation. The scenario for clinicians simulated a consulting visit to an emergency room that evolved into a problem-solving challenge. Participants in this scenario had a limited time to prepare advice for hospital leadership on how to improve observed safety and cultural deficiencies. Debriefings after both types of scenarios were conducted using principles of "debriefing with good judgment." We assessed the relevance and impact of the program by analyzing participant reactions to the simulation through transcript data and facilitator observations as well as a postcourse questionnaire. The teams generally reported positive perceptions of the relevance and quality of the simulation with varying types and degrees of impact on their leadership and teamwork behaviors. These kinds of clinical simulation exercises can be used to teach healthcare leaders and managers safety leadership and teamwork skills and behaviors.

Safety climate and safety behaviors in the construction industry: The importance of co-workers commitment to safety.

PubMed

Schwatka, Natalie V; Rosecrance, John C

2016-06-16

There is growing empirical evidence that as safety climate improves work site safety practice improve. Safety climate is often measured by asking workers about their perceptions of management commitment to safety. However, it is less common to include perceptions of their co-workers commitment to safety. While the involvement of management in safety is essential, working with co-workers who value and prioritize safety may be just as important. To evaluate a concept of safety climate that focuses on top management, supervisors and co-workers commitment to safety, which is relatively new and untested in the United States construction industry. Survey data was collected from a cohort of 300 unionized construction workers in the United States. The significance of direct and indirect (mediation) effects among safety climate and safety behavior factors were evaluated via structural equation modeling. Results indicated that safety climate was associated with safety behaviors on the job. More specifically, perceptions of co-workers commitment to safety was a mediator between both management commitment to safety climate factors and safety behaviors. These results support workplace health and safety interventions that build and sustain safety climate and a commitment to safety amongst work teams.

Evaluation of attenuated PSM photomask blanks with TF11 chrome and FEP-171 resist on a 248 nm DUV laser pattern generator

NASA Astrophysics Data System (ADS)

Xing, Kezhao; Björnborg, Charles; Karlsson, Henrik; Paulsson, Adisa; Rosendahl, Anna; Beiming, Peter; Vedenpää, Jukka; Walford, Jonathan; Newman, Tom

2007-10-01

Tighter requirements on mask resolution, CD and image positioning accuracy at and beyond the 45 nm technology node push the development of improved photomask blanks. One such blank for attenuated phase-shift masks (att-PSM) provides a thinner chrome film, named TF11, with higher chrome etch rate compared to the previous generation Att- PSM blank (NTAR5 chrome film) from the same supplier. Reduced stress in the chrome film also results in less image placement error induced by the material. FEP-171 is the positive chemically amplified resist (PCAR) that is most commonly used in advanced mask manufacturing with both 50 keV variable shaped e-beam (VSB) and DUV laser pattern generators. TF11 allows an FEP-171 resist film down to about 2000 Å thickness with sufficient etch resistance, while the standard resist thickness for NTAR5 is around 3000 Å. This work has experimentally evaluated the use of TF11 chrome and FEP-171 resist together with a 248 nm DUV laser pattern generator, the Sigma7500. First, patterning performance in resist with thicknesses from 2000 Å to 2600 Å, in steps of 100 Å, was tested with respect to swing curve and basic lithographic parameters including resolution, CD linearity, CD iso-dense bias and dose sensitivity. Patterning results on mask showed a swing minimum at around 2200 Å and a swing maximum at around 2500 Å, which correspond to reflectivity measurements for 248 nm wavelength performed by the blank supplier. It was concluded that the overall patterning performance was best close to the swing maximum. Thereafter the patterning performance using TF11 at two resist thicknesses, 2000 Å and 2550 Å, was studied in more detail and compared to performance using NTAR5 with 3200 Å resist. The evaluation showed that the Sigma7500-II offers good compatibility with TF11, especially using the optimized FEP-171 resist thickness of 2550 Å. It also showed that the patterning capability of the Sigma7500-II using TF11 and 2550 Å resist is improved

Idaho National Laboratory Integrated Safety Management System FY 2016 Effectiveness Review and Declaration Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hunt, Farren J.

Idaho National Laboratory’s (INL’s) Integrated Safety Management System (ISMS) effectiveness review of fiscal year (FY) 2016 shows that INL has integrated management programs and safety elements throughout the oversight and operational activities performed at INL. The significant maturity of Contractor Assurance System (CAS) processes, as demonstrated across INL’s management systems and periodic reporting through the Management Review Meeting process, over the past two years has provided INL with current real-time understanding and knowledge pertaining to the health of the institution. INL’s sustained excellence of the Integrated Safety and effective implementation of the Worker Safety and Health Program is also evidencedmore » by other external validations and key indicators. In particular, external validations include VPP, ISO 14001, DOELAP accreditation, and key Laboratory level indicators such as ORPS (number, event frequency and severity); injury/illness indicators such as Days Away, Restricted and Transfer (DART) case rate, back & shoulder metric and open reporting indicators, demonstrate a continuous positive trend and therefore improved operational performance over the last few years. These indicators are also reflective of the Laboratory’s overall organizational and safety culture improvement. Notably, there has also been a step change in ESH&Q Leadership actions that have been recognized both locally and complex-wide. Notwithstanding, Laboratory management continues to monitor and take action on lower level negative trends in numerous areas including: Conduct of Operations, Work Control, Work Site Analysis, Risk Assessment, LO/TO, Fire Protection, and Life Safety Systems, to mention a few. While the number of severe injury cases has decreased, as evidenced by the reduction in the DART case rate, the two hand injuries and the fire truck/ambulance accident were of particular concern. Aggressive actions continue in order to understand the causes

33 CFR 96.320 - What is involved to complete a safety management audit and when is it required to be completed?

Code of Federal Regulations, 2010 CFR

2010-07-01

... up the safety management system. (c) Actions required during safety management audits for a company... management system, as defined in subpart B of this part. (2) Make sure the audit complies with this subpart... safety management system is found during an audit, it must be reported in writing by the auditor: (1) For...

[A simplified occupational health and safety management system designed for small enterprises. Initial validation results].

PubMed

Bacchi, Romana; Veneri, L; Ghini, P; Caso, Maria Alessandra; Baldassarri, Giovanna; Renzetti, F; Santarelli, R

2009-01-01

Occupational Health and Safety Management Systems (OHSMS) are known to be effective in improving safety at work. Unfortunately they are often too resource-heavy for small businesses. The aim of this project was to develop and test a simplified model of OHSMS suitable for small enterprises. The model consists of 7 procedures and various operating forms and check lists, that guide the enterprise in managing safety at work. The model was tested in 15 volunteer enterprises. In most of the enterprises two audits showed increased awareness and participation of workers; better definition and formalisation of respon sibilities in 8 firms; election of Union Safety Representatives in over one quarter of the enterprises; improvement of safety equipment. The study also helped identify areas where the model could be improved by simplification of unnecessarily complex and redundant procedures.

Application of a risk management system to improve drinking water safety.

PubMed

Jayaratne, Asoka

2008-12-01

The use of a comprehensive risk management framework is considered a very effective means of managing water quality risks. There are many risk-based systems available to water utilities such as ISO 9001 and Hazard Analysis and Critical Control Point (HACCP). In 2004, the World Health Organization's (WHO) Guidelines for Drinking Water Quality recommended the use of preventive risk management approaches to manage water quality risks. This paper describes the framework adopted by Yarra Valley Water for the development of its Drinking Water Quality Risk Management Plan incorporating HACCP and ISO 9001 systems and demonstrates benefits of Water Safety Plans such as HACCP. Copyright IWA Publishing 2008.

Total safety management: An approach to improving safety culture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blush, S.M.

A little over 4 yr ago, Admiral James D. Watkins became Secretary of Energy. President Bush, who had appointed him, informed Watkins that his principal task would be to clean up the nuclear weapons complex and put the US Department of Energy (DOE) back in the business of producing tritium for the nation's nuclear deterrent. Watkins recognized that in order to achieve these objectives, he would have to substantially improve the DOE's safety culture. Safety culture is a relatively new term. The International Atomic Energy Agency (IAEA) used it in a 1986 report on the root causes of the Chernobylmore » nuclear accident. In 1990, the IAEA's International Nuclear Safety Advisory Group issued a document focusing directly on safety culture. It provides guidelines to the international nuclear community for measuring the effectiveness of safety culture in nuclear organizations. Safety culture has two principal aspects: an organizational framework conducive to safety and the necessary organizational and individual attitudes that promote safety. These obviously go hand in hand. An organization must create the right framework to foster the right attitudes, but individuals must have the right attitudes to create the organizational framework that will support a good safety culture. The difficulty in developing such a synergistic relationship suggests that achieving and sustaining a strong safety culture is not easy, particularly in an organization whose safety culture is in serious disrepair.« less

78 FR 41908 - Sunshine Act Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-12

... issued by the CSB to the U.S. Occupational Safety and Health Administration: (1) 2001-05-I-DE-1 (revision... INFORMATION: Recommendation to the U.S. Occupational Safety and Health Administration 2001-05-I-DE-1.... Occupational Safety and Health Review Commission. The decision, exempts from PSM coverage, ``flammable liquids...

Gun Safety Management with Patients at Risk for Suicide

ERIC Educational Resources Information Center

Simon, Robert I.

2007-01-01

Guns in the home are associated with a five-fold increase in suicide. All patients at risk for suicide must be asked if guns are available at home or easily accessible elsewhere, or if they have intent to buy or purchase a gun. Gun safety management requires a collaborative team approach including the clinician, patient, and designated person…

Making work safer: testing a model of social exchange and safety management.

PubMed

DeJoy, David M; Della, Lindsay J; Vandenberg, Robert J; Wilson, Mark G

2010-04-01

This study tests a conceptual model that focuses on social exchange in the context of safety management. The model hypothesizes that supportive safety policies and programs should impact both safety climate and organizational commitment. Further, perceived organizational support is predicted to partially mediate both of these relationships. Study outcomes included traditional outcomes for both organizational commitment (e.g., withdrawal behaviors) as well as safety climate (e.g., self-reported work accidents). Questionnaire responses were obtained from 1,723 employees of a large national retailer. Using structural equation modeling (SEM) techniques, all of the model's hypothesized relationships were statistically significant and in the expected directions. The results are discussed in terms of social exchange in organizations and research on safety climate. Maximizing safety is a social-technical enterprise. Expectations related to social exchange and reciprocity figure prominently in creating a positive climate for safety within the organization. Copyright 2010 Elsevier Ltd. All rights reserved.

78 FR 71036 - Pipeline Safety: Random Drug Testing Rate; Contractor Management Information System Reporting...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-27

... PHMSA-2013-0248] Pipeline Safety: Random Drug Testing Rate; Contractor Management Information System Reporting; and Obtaining Drug and Alcohol Management Information System Sign-In Information AGENCY: Pipeline... Management Information System (MIS) Data; and New Method for Operators to Obtain User Name and Password for...

78 FR 67326 - Safety and Environmental Management System Requirements for Vessels on the U.S. Outer Continental...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-12

... 1625-AC05 Safety and Environmental Management System Requirements for Vessels on the U.S. Outer... ``Safety and Environmental Management System Requirements for Vessels on the U.S. Outer Continental Shelf... of industry to ensure stakeholders have adequate time to submit complete responses. DATES: Comments...

E&P forum land transport safety management guidelines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barber, S.; Carouso, M.; Covil, M.

1996-11-01

Against a general background of falling lost time injuries the member of serious incidents and fatalities in the upstream E&P industry involving motor vehicles employed in land transport remains stubbornly high. In consequence the E&P Forum has prepared guidelines to provide the E&P industry with clear guidance and a shared aim in minimizing vehicle incidents and their costs. Logistics and land transport are multifunctional activities involving personnel throughout the E&P industry. All those involved in land transport share a joint commitment to amazing land transport risks in their operation and to preventing incidents and fatalities as stated in their HSEmore » policies. Historically management`s focus has been on those activities which have a higher perceived risk. This attention has resulted in significant reductions in the number of accidents in these areas. The management of land transport safety requires the same approach and the same proactive emphasis as the management of other HSE risks within the business activity. Companies should have in place a management system for land transport operations based on a full and careful appraisal of the risks, followed by a clear management strategy to minimis and control those risks to a level as low as reasonably practicable.« less

33 CFR 96.360 - Interim Safety Management Certificate: what is it and when can it be used?

Code of Federal Regulations, 2010 CFR

2010-07-01

... section, when— (1) The company's valid Document of Compliance certificate or Interim Document of Compliance certificate applies to that vessel type; (2) The company's safety management system for the vessel... to the responsible person or their company. (b) An Interim Safety Management Certificate is valid for...

78 FR 50079 - Information Collection Activities: Safety and Environmental Management Systems (SEMS); Proposed...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-16

... DEPARTMENT OF THE INTERIOR Bureau of Safety and Environmental Enforcement [Docket ID BSEE-2013-0005; OMB Control Number 1014-0017: 134E1700D2 EEEE500000 ET1SF0000.DAQ000] Information Collection Activities: Safety and Environmental Management Systems (SEMS); Proposed Collection; Comment Request Correction In notice document 2013-19416 appearing o...

Application of Modern Tools and Techniques for Mine Safety & Disaster Management

NASA Astrophysics Data System (ADS)

Kumar, Dheeraj

2016-04-01

The implementation of novel systems and adoption of improvised equipment in mines help mining companies in two important ways: enhanced mine productivity and improved worker safety. There is a substantial need for adoption of state-of-the-art automation technologies in the mines to ensure the safety and to protect health of mine workers. With the advent of new autonomous equipment used in the mine, the inefficiencies are reduced by limiting human inconsistencies and error. The desired increase in productivity at a mine can sometimes be achieved by changing only a few simple variables. Significant developments have been made in the areas of surface and underground communication, robotics, smart sensors, tracking systems, mine gas monitoring systems and ground movements etc. Advancement in information technology in the form of internet, GIS, remote sensing, satellite communication, etc. have proved to be important tools for hazard reduction and disaster management. This paper is mainly focused on issues pertaining to mine safety and disaster management and some of the recent innovations in the mine automations that could be deployed in mines for safe mining operations and for avoiding any unforeseen mine disaster.

Labor-Management Cooperation in Illinois: How a Joint Union Company Team Is Improving Facility Safety.

PubMed

Mahan, Bruce; Maclin, Reggie; Ruttenberg, Ruth; Mundy, Keith; Frazee, Tom; Schwartzkopf, Randy; Morawetz, John

2018-01-01

This study of Afton Chemical Corporation's Sauget facility and its International Chemical Workers Union Council (ICWUC) Local 871C demonstrates how significant safety improvements can be made when committed leadership from both management and union work together, build trust, train the entire work force in U.S. Occupational Safety and Health Administration 10-hour classes, and communicate with their work force, both salaried and hourly. A key finding is that listening to the workers closest to production can lead to solutions, many of them more cost-efficient than top-down decision-making. Another is that making safety and health an authentic value is hard work, requiring time, money, and commitment. Third, union and management must both have leadership willing to take chances and learn to trust one another. Fourth, training must be for everyone and ongoing. Finally, health and safety improvements require dedicated funding. The result was resolution of more than one hundred safety concerns and an ongoing institutionalized process for continuing improvement.

Human health and safety risks management in underground coal mines using fuzzy TOPSIS.

PubMed

Mahdevari, Satar; Shahriar, Kourosh; Esfahanipour, Akbar

2014-08-01

The scrutiny of health and safety of personnel working in underground coal mines is heightened because of fatalities and disasters that occur every year worldwide. A methodology based on fuzzy TOPSIS was proposed to assess the risks associated with human health in order to manage control measures and support decision-making, which could provide the right balance between different concerns, such as safety and costs. For this purpose, information collected from three hazardous coal mines namely Hashouni, Hojedk and Babnizu located at the Kerman coal deposit, Iran, were used to manage the risks affecting the health and safety of their miners. Altogether 86 hazards were identified and classified under eight categories: geomechanical, geochemical, electrical, mechanical, chemical, environmental, personal, and social, cultural and managerial risks. Overcoming the uncertainty of qualitative data, the ranking process is accomplished by fuzzy TOPSIS. After running the model, twelve groups with different risks were obtained. Located in the first group, the most important risks with the highest negative effects are: materials falling, catastrophic failure, instability of coalface and immediate roof, firedamp explosion, gas emission, misfire, stopping of ventilation system, wagon separation at inclines, asphyxiation, inadequate training and poor site management system. According to the results, the proposed methodology can be a reliable technique for management of the minatory hazards and coping with uncertainties affecting the health and safety of miners when performance ratings are imprecise. The proposed model can be primarily designed to identify potential hazards and help in taking appropriate measures to minimize or remove the risks before accidents can occur. Copyright © 2014 Elsevier B.V. All rights reserved.

76 FR 22944 - Pipeline Safety: Notice of Public Webinars on Implementation of Distribution Integrity Management...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-25

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket ID... Management Programs AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION... Nation's gas distribution pipeline systems through development of inspection methods and guidance for the...

Safety considerations in the pharmacological management of atrial fibrillation.

PubMed

Camm, A John

2008-07-21

The pharmacological management of atrial fibrillation (AF) requires careful consideration from a safety perspective. This article focuses primarily on maintenance therapy using antiarrhythmic drugs (AADs). The foremost safety issue for AADs is the propensity of class IA and III agents to cause torsade de pointes arrhythmias. Class IA drugs, particularly quinidine, can induce torsade de pointes at low or subtherapeutic doses, but higher doses are not necessarily associated with an increased incidence. 'Pure' class III drugs such as dofetilide induce torsade de pointes in a dose-related manner, but some class III agents with more complex actions such as amiodarone have a markedly lower potential to cause this arrhythmia. The risk of torsade de pointes precludes the use of class IA and 'pure' class III agents in patients with left ventricular hypertrophy and bradycardia. Class IC agents may cause sustained monomorphic ventricular tachycardias and are generally precluded in ischaemic and structural heart disease. Advanced heart failure patients may be treated with amiodarone or dofetilide, but most other AADs are unsuitable. The most important extracardiac toxicities occurring with AADs are those of amiodarone. Drug interactions are a significant safety issue in the management of AF, including pharmacokinetic interactions in which plasma levels of the AAD are raised - increasing the risk of proarrhythmia - and concomitant use of drugs that prolong the QT interval. Notwithstanding these considerations, most patients with AF can be considered for rhythm control, provided there is adequate pre-treatment assessment and protocols for initiation, dosing and monitoring are followed with care.

Management of health and safety in the organization of worktime at the local level.

PubMed

Jeppesen, H J; Bøggild, H

1998-01-01

This study examined the consideration of health and safety issues in the local process of organizing worktime within the framework of regulations. The study encompassed all 7 hospitals in one region of Denmark. Twenty-three semi-structured interviews were carried out with 2 representatives from the different parties involved (management, cooperation committees, health and safety committees from each hospital, and 2 local unions). Furthermore, a questionnaire was sent to all 114 wards with day and night duty. The response rate was 84%. Data were collected on alterations in worktime schedules, responsibilities, reasons for the present design of schedules, and use of inspection reports. The organization of worktime takes place in single wards without external interference and without guidelines other than the minimum standards set in regulations. At the ward level, management and employees were united in a mutual desire for flexibility, despite the fact that regulations were not always followed. No interaction was found in the management of health and safety factors between the parties concerned at different levels. The demands for flexibility in combination with the absence of guidelines and the missing dynamics between the parties involved imply that the handling of health and safety issues in the organization of worktime may be accidental and unsystematic. In order to consider the health and safety of night and shift workers within the framework of regulations, a clarification of responsibilities, operational levels, and cooperation is required between the parties concerned.

30 CFR 285.811 - When must I follow my Safety Management System?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Environmental and Safety Management, Inspections, and Facility Assessments for Activities Conducted Under SAPs... COP, SAP, or GAP. You must conduct all activities described in your approved COP, SAP, or GAP in...

Office of River Protection Integrated Safety Management System Description

DOE Office of Scientific and Technical Information (OSTI.GOV)

CLARK, D.L.

Revision O was never issued. Finding safe and environmentally sound methods of storage and disposal of 54 million gallons of highly radioactive waste contained in 177 underground tanks is the largest challenge of Hanford cleanup. TWRS was established in 1991 and continues to integrate all aspects of the treatment and management of the high-level radioactive waste tanks. In fiscal Year 1997, program objectives were advanced in a number of areas. RL TWRS refocused the program toward retrieving, treating, and immobilizing the tank wastes, while maintaining safety as first priority. Moving from a mode of storing the wastes to getting themore » waste out of the tanks will provide the greatest cleanup return on the investment and eliminate costly mortgage continuance. There were a number of safety-related achievements in FY1997. The first high priority safety issue was resolved with the removal of 16 tanks from the ''Wyden Watch List''. The list, brought forward by Senator Ron Wyden of Oregon, identified various Hanford safety issues needing attention. One of these issues was ferrocyanide, a chemical present in 24 tanks. Although ferrocyanide can ignite at high temperature, analysis found that the chemical has decomposed into harmless compounds and is no longer a concern.« less

Seniors managing multiple medications: using mixed methods to view the home care safety lens.

PubMed

Lang, Ariella; Macdonald, Marilyn; Marck, Patricia; Toon, Lynn; Griffin, Melissa; Easty, Tony; Fraser, Kimberly; MacKinnon, Neil; Mitchell, Jonathan; Lang, Eddy; Goodwin, Sharon

2015-12-12

Patient safety is a national and international priority with medication safety earmarked as both a prevalent and high-risk area of concern. To date, medication safety research has focused overwhelmingly on institutional based care provided by paid healthcare professionals, which often has little applicability to the home care setting. This critical gap in our current understanding of medication safety in the home care sector is particularly evident with the elderly who often manage more than one chronic illness and a complex palette of medications, along with other care needs. This study addresses the medication management issues faced by seniors with chronic illnesses, their family, caregivers, and paid providers within Canadian publicly funded home care programs in Alberta (AB), Ontario (ON), Quebec (QC) and Nova Scotia (NS). Informed by a socio-ecological perspective, this study utilized Interpretive Description (ID) methodology and participatory photographic methods to capture and analyze a range of visual and textual data. Three successive phases of data collection and analysis were conducted in a concurrent, iterative fashion in eight urban and/or rural households in each province. A total of 94 participants (i.e., seniors receiving home care services, their family/caregivers, and paid providers) were interviewed individually. In addition, 69 providers took part in focus groups. Analysis was iterative and concurrent with data collection in that each interview was compared with subsequent interviews for converging as well as diverging patterns. Six patterns were identified that provide a rich portrayal of the complexity of medication management safety in home care: vulnerabilities that impact the safe management and storage of medication, sustaining adequate supports, degrees of shared accountability for care, systems of variable effectiveness, poly-literacy required to navigate the system, and systemic challenges to maintaining medication safety in the home

Corporate Functional Management Evaluation of the LLNL Radiation Safety Organization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sygitowicz, L S

2008-03-20

A Corporate Assess, Improve, and Modernize review was conducted at Lawrence Livermore National Laboratory (LLNL) to evaluate the LLNL Radiation Safety Program and recommend actions to address the conditions identified in the Internal Assessment conducted July 23-25, 2007. This review confirms the findings of the Internal Assessment of the Institutional Radiation Safety Program (RSP) including the noted deficiencies and vulnerabilities to be valid. The actions recommended are a result of interviews with about 35 individuals representing senior management through the technician level. The deficiencies identified in the LLNL Internal Assessment of the Institutional Radiation Safety Program were discussed with Radiationmore » Safety personnel team leads, customers of Radiation Safety Program, DOE Livermore site office, and senior ES&H management. There are significant issues with the RSP. LLNL RSP is not an integrated, cohesive, consistently implemented program with a single authority that has the clear roll and responsibility and authority to assure radiological operations at LLNL are conducted in a safe and compliant manner. There is no institutional commitment to address the deficiencies that are identified in the internal assessment. Some of these deficiencies have been previously identified and corrective actions have not been taken or are ineffective in addressing the issues. Serious funding and staffing issues have prevented addressing previously identified issues in the Radiation Calibration Laboratory, Internal Dosimetry, Bioassay Laboratory, and the Whole Body Counter. There is a lack of technical basis documentation for the Radiation Calibration Laboratory and an inadequate QA plan that does not specify standards of work. The Radiation Safety Program lack rigor and consistency across all supported programs. The implementation of DOE Standard 1098-99 Radiological Control can be used as a tool to establish this consistency across LLNL. The establishment of a

46 CFR 31.40-30 - Safety Management Certificate-T/ALL.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 1 2011-10-01 2011-10-01 false Safety Management Certificate-T/ALL. 31.40-30 Section 31.40-30 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS INSPECTION AND CERTIFICATION... Certificate—T/ALL. All tankships to which 33 CFR part 96 applies on an international voyage must have a valid...

46 CFR 31.40-30 - Safety Management Certificate-T/ALL.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Safety Management Certificate-T/ALL. 31.40-30 Section 31.40-30 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS INSPECTION AND CERTIFICATION... Certificate—T/ALL. All tankships to which 33 CFR part 96 applies on an international voyage must have a valid...

75 FR 10490 - Joint Meeting of the Arthritis Drugs Advisory Committee and the Drug Safety and Risk Management...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-08

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2010-N-0001] Joint Meeting of the Arthritis Drugs Advisory Committee and the Drug Safety and Risk Management Advisory... Drug Safety and Risk Management Advisory Committee. General Function of the Committees: To provide...

Potential applications of video technology for traffic management and safety in Alabama

DOT National Transportation Integrated Search

2002-11-25

Video technology applications for traffic management and safety are being implemented by state and local government agencies in Alabama. This technology offers both tangible and intangible benefits. Although video technology provides many benefits, i...

Patient Safety Policy in Long-Term Care: A Research Protocol to Assess Executive WalkRounds to Improve Management of Early Warning Signs for Patient Safety.

PubMed

van Dusseldorp, Loes; Hamers, Hub; van Achterberg, Theo; Schoonhoven, Lisette

2014-07-15

At many hospitals and long-term care organizations (such as nursing homes), executive board members have a responsibility to manage patient safety. Executive WalkRounds offer an opportunity for boards to build a trusting relationship with professionals and seem useful as a leadership tool to pick up on soft signals, which are indirect signals or early warnings that something is wrong. Because the majority of the research on WalkRounds has been performed in hospitals, it is unknown how board members of long-term care organizations develop their patient safety policy. Also, it is not clear if these board members use soft signals as a leadership tool and, if so, how this influences their patient safety policies. The objective of this study is to explore the added value and the feasibility of WalkRounds for patient safety management in long-term care. This study also aims to identify how executive board members of long-term care organizations manage patient safety and to describe the characteristics of boards. An explorative before-and-after study was conducted between April 2012 and February 2014 in 13 long-term care organizations in the Netherlands. After implementing the intervention in 6 organizations, data from 72 WalkRounds were gathered by observation and a reporting form. Before and after the intervention period, data collection included interviews, questionnaires, and studying reports of the executive boards. A mixed-method analysis is performed using descriptive statistics, t tests, and content analysis. Results are expected to be ready in mid 2014. It is a challenge to keep track of ongoing development and implementation of patient safety management tools in long-term care. By performing this study in cooperation with the participating long-term care organizations, insight into the potential added value and the feasibility of this method will increase.

Emotions at work: what is the link to patient and staff safety? Implications for nurse managers in the NHS.

PubMed

Smith, Pam; Pearson, Pauline H; Ross, Fiona

2009-03-01

This paper sets the discussion of emotions at work within the modern NHS and the current prioritisation of creating a safety culture within the service. The paper focuses on the work of students, frontline nurses and their managers drawing on recent studies of patient safety in the curriculum, and governance and incentives in the care of patients with complex long term conditions. The primary research featured in the paper combined a case study design with focus groups, interviews and observation. In the patient safety research the importance of physical and emotional safety emerged as a key finding both for users and professionals. In the governance and incentives research, risk emerged as a key concern for managers, frontline workers and users. The recognition of emotions and the importance of emotional labour at an individual and organizational level managed by emotionally intelligent leaders played an important role in promoting worker and patient safety and reducing workplace risk. Nurse managers need to be aware of the emotional complexities of their organizations in order to set up systems to support the emotional wellbeing of professionals and users which in turn ensures safety and reduces risk.

Health, safety, and environmental management system operation in contracting companies: A case study.

PubMed

Nassiri, Parvin; Yarahmadi, Rasoul; Gholami, Pari Shafaei; Hamidi, Abdolamir; Mirkazemi, Roksana

2016-05-03

Systematic and cooperative interactions among parent industry and contractors are necessary for a successful health, safety, and environmental management system (HSE-MS). This study was conducted to evaluate the HSE-MS performance in contracting companies in one of the petrochemical industries in Iran during 2013. Managers of parent and contracting companies participated in this study. The data collection forms included 7 elements of an integrated HSE-MS (leadership and commitment; policy and strategic objectives; organization, resources, and documentation; evaluation and risk management; planning; implementation and monitoring; auditing and reviewing). The results showed that mean percentage of the total scores in seven elements of HSE-MS was 85.7% and 87.0% based on self-report and report of parent company, respectively. In conclusion, this study showed that HSE-MS was desirably functioning; however, improvement to ensure health and safety of workers is still required.

Hanford Site Environmental Safety and Health Fiscal Year 2001 Budget-Risk management summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

REEP, I.E.

1999-05-12

The Hanford Site Environment, Safety and Health (ES&H) Budget-Risk Management Summary report is prepared to support the annual request to sites in the U.S. Department of Energy (DOE) Complex by DOE, Headquarters. The request requires sites to provide supplementary crosscutting information related to ES&H activities and the ES&H resources that support these activities. The report includes the following: (1) A summary status of fiscal year (FY) 1999 ES&H performance and ES&H execution commitments; (2)Status and plans of Hanford Site Office of Environmental Management (EM) cleanup activities; (3) Safety and health (S&H) risk management issues and compliance vulnerabilities of FY 2001more » Target Case and Below Target Case funding of EM cleanup activities; (4) S&H resource planning and crosscutting information for FY 1999 to 2001; and (5) Description of indirect-funded S&H activities.« less

Hazard Management Dealt by Safety Professionals in Colleges: The Impact of Individual Factors.

PubMed

Wu, Tsung-Chih; Chen, Chi-Hsiang; Yi, Nai-Wen; Lu, Pei-Chen; Yu, Shan-Chi; Wang, Chien-Peng

2016-12-03

Identifying, evaluating, and controlling workplace hazards are important functions of safety professionals (SPs). The purpose of this study was to investigate the content and frequency of hazard management dealt by safety professionals in colleges. The authors also explored the effects of organizational factors/individual factors on SPs' perception of frequency of hazard management. The researchers conducted survey research to achieve the objective of this study. The researchers mailed questionnaires to 200 SPs in colleges after simple random sampling, then received a total of 144 valid responses (response rate = 72%). Exploratory factor analysis indicated that the hazard management scale (HMS) extracted five factors, including physical hazards, biological hazards, social and psychological hazards, ergonomic hazards, and chemical hazards. Moreover, the top 10 hazards that the survey results identified that safety professionals were most likely to deal with (in order of most to least frequent) were: organic solvents, illumination, other chemicals, machinery and equipment, fire and explosion, electricity, noise, specific chemicals, human error, and lifting/carrying. Finally, the results of one-way multivariate analysis of variance (MANOVA) indicated there were four individual factors that impacted the perceived frequency of hazard management which were of statistical and practical significance: job tenure in the college of employment, type of certification, gender, and overall job tenure. SPs within colleges and industries can now discuss plans revolving around these five areas instead of having to deal with all of the separate hazards.

Hazard Management Dealt by Safety Professionals in Colleges: The Impact of Individual Factors

PubMed Central

Wu, Tsung-Chih; Chen, Chi-Hsiang; Yi, Nai-Wen; Lu, Pei-Chen; Yu, Shan-Chi; Wang, Chien-Peng

2016-01-01

Identifying, evaluating, and controlling workplace hazards are important functions of safety professionals (SPs). The purpose of this study was to investigate the content and frequency of hazard management dealt by safety professionals in colleges. The authors also explored the effects of organizational factors/individual factors on SPs’ perception of frequency of hazard management. The researchers conducted survey research to achieve the objective of this study. The researchers mailed questionnaires to 200 SPs in colleges after simple random sampling, then received a total of 144 valid responses (response rate = 72%). Exploratory factor analysis indicated that the hazard management scale (HMS) extracted five factors, including physical hazards, biological hazards, social and psychological hazards, ergonomic hazards, and chemical hazards. Moreover, the top 10 hazards that the survey results identified that safety professionals were most likely to deal with (in order of most to least frequent) were: organic solvents, illumination, other chemicals, machinery and equipment, fire and explosion, electricity, noise, specific chemicals, human error, and lifting/carrying. Finally, the results of one-way multivariate analysis of variance (MANOVA) indicated there were four individual factors that impacted the perceived frequency of hazard management which were of statistical and practical significance: job tenure in the college of employment, type of certification, gender, and overall job tenure. SPs within colleges and industries can now discuss plans revolving around these five areas instead of having to deal with all of the separate hazards. PMID:27918474

Implications of case managers' perceptions and attitude on safety of home-delivered care.

PubMed

Jones, Sarahjane

2015-12-01

Perceptions on safety in community care have been relatively unexplored. A project that sought to understand the multiple perspectives on safety in the NHS case-management programme was carried out in relation to the structure, process, and outcome of care. This article presents a component of the nursing perspective that highlights an important element in the structure of nursing care that could potentially impede the nurses' ability to be fully effective and safe. A single case study of the case-management programme was undertaken. Three primary care organisations from three strategic health authorities participated, and three focus groups were conducted (one within each organisation). In total, 17 case management nurses participated. Data were audiotaped and transcribed verbatim and subjected to framework analysis. Nursing staff attitudes were identified as a structure of care that influence safety outcomes, particularly their perceptions of the care setting and the implications it has on their role and patient behaviour. Greater understanding of the expected role of the community nurse is necessary, and relevant training is required for nurses to be successful in empowering patients to perform more safely. In addition, efforts need to be made to improve patients' trust in the health-care system to prevent harm and promote more effective utilisation of resources.

Safety assessment methodology in management of spent sealed sources.

PubMed

Mahmoud, Narmine Salah

2005-02-14

Environmental hazards can be caused from radioactive waste after their disposal. It was therefore important that safety assessment methodologies be developed and established to study and estimate the possible hazards, and institute certain safety methodologies that lead and prevent the evolution of these hazards. Spent sealed sources are specific type of radioactive waste. According to IAEA definition, spent sealed sources are unused sources because of activity decay, damage, misuse, loss, or theft. Accidental exposure of humans from spent sealed sources can occur at the moment they become spent and before their disposal. Because of that reason, safety assessment methodologies were tailored to suit the management of spent sealed sources. To provide understanding and confidence of this study, validation analysis was undertaken by considering the scenario of an accident that occurred in Egypt, June 2000 (the Meet-Halfa accident from an iridium-192 source). The text of this work includes consideration related to the safety assessment approaches of spent sealed sources which constitutes assessment context, processes leading an active source to be spent, accident scenarios, mathematical models for dose calculations, and radiological consequences and regulatory criteria. The text also includes a validation study, which was carried out by evaluating a theoretical scenario compared to the real scenario of Meet-Halfa accident depending on the clinical assessment of affected individuals.

Options for enhancing the effectiveness of Virginia's safety management system : final report.

DOT National Transportation Integrated Search

1996-02-01

In 1993, Virginia began to formalize the relationships and organizational structure for its Safety Management System (SMS). Although the SMS is no longer a federal requirement, Virginia decided to continue its implementation. The Focal Point for the ...

An integrated approach for improving occupational health and safety management: the voluntary protection program in Taiwan.

PubMed

Su, Teh-Sheng; Tsai, Way-Yi; Yu, Yi-Chun

2005-05-01

A voluntary compliance program for occupational health and safety management, Voluntary Protection Programs (VPP), was implemented with a strategy of cooperation and encouragement in Taiwan. Due to limitations on increasing the human forces of inspection, a regulatory-based guideline addressing the essence of Occupational Health and Safety Management Systems (OHSMS) was promulgated, which combined the resources of third parties and insurance providers to accredit a self-improving worksite with the benefits of waived general inspection and a merit contributing to insurance premium payment reduction. A designated institute accepts enterprise's applications, performs document review and organizes the onsite inspection. A final review committee of Council of Labor Affairs (CLA) confers a two-year certificate on an approved site. After ten years, the efforts have shown a dramatic reduction of occupational injuries and illness in the total number of 724 worksites granted certification. VPP worksites, in comparison with all industries, had 49% lower frequency rate in the past three years. The severity rate reduction was 80% in the same period. The characteristics of Taiwan VPP program and international occupational safety and health management programs are provided. A Plan-Do-Check-Act management cycle was employed for pursuing continual improvements to the culture fostered. The use of a quantitative measurement for assessing the performance of enterprises' occupational safety and health management showed the efficiency of the rating. The results demonstrate that an employer voluntary protection program is a promising strategy for a developing country.

Firefighters United for Safety, Ethics, and Ecology (FUSEE): Torchbearers for a new fire management paradigm

Treesearch

Timothy Ingalsbee; Joseph Fox; Patrick Withen

2007-01-01

Firefighters United for Safety, Ethics, and Ecology (FUSEE) is a nonprofit organization promoting safe, ethical, ecological wildland fire management. FUSEE believes firefighter and community safety are ultimately interdependent with ethical public service, wildlands protection, and ecological restoration of fire-adapted ecosystems. Our members include current, former,...

An integrated and pragmatic approach: Global plant safety management

NASA Astrophysics Data System (ADS)

McNutt, Jack; Gross, Andrew

1989-05-01

The Bhopal disaster in India in 1984 has compelled manufacturing companies to review their operations in order to minimize their risk exposure. Much study has been done on the subject of risk assessment and in refining safety reviews of plant operations. However, little work has been done to address the broader needs of decision makers in the multinational environment. The corporate headquarters of multinational organizations are concerned with identifying vulnerable areas to assure that appropriate risk-minimization measures are in force or will be taken. But the task of screening global business units for safety prowess is complicated and time consuming. This article takes a step towards simplifying this process by presenting the decisional model developed by the authors. Beginning with an overview of key issues affecting global safety management, the focus shifts to the multinational vulnerability model developed by the authors, which reflects an integration of approaches. The article concludes with a discussion of areas for further research. While the global chemical industry and major incidents therein are used for illustration, the procedures and solutions suggested here are applicable to all manufacturing operations.

Safety skills of mental health workers: empirical evidence of a risk management strategy.

PubMed

Flannery, Raymond B; Walker, Andrew P

2003-01-01

To reduce violence in the workplace, health care facilities invest time and resources in risk management strategies such as photo identification and controlled access and surveillance. Studies of assaultive psychiatric patients continue to document that mental health workers (MHWs) are the most frequent targets of the patient violence. Unexamined in these findings is the role skilled MHWs contribute in restoring safety and order in the aftermath of these assaults. This six-year, empirical retrospective study examined the safety skills of MHWs in containing violence. Although they were 28% of the workforce, MHWs restored order in the majority of single assault incidents and restraint procedures. Their skills appear to be a risk management strategy in their own right. The implications are discussed.

Diabetes management and hypoglycemia in safety sensitive jobs.

PubMed

Lee, See-Muah; Koh, David; Chui, Winnie Kl; Sum, Chee-Fang

2011-03-01

The majority of people diagnosed with diabetes mellitus are in the working age group in developing countries. The interrelationship of diabetes and work, that is, diabetes affecting work and work affecting diabetes, becomes an important issue for these people. Therapeutic options for the diabetic worker have been developed, and currently include various insulins, insulin sensitizers and secretagogues, incretin mimetics and enhancers, and alpha glucosidase inhibitors. Hypoglycemia and hypoglycaemic unawareness are important and unwanted treatment side effects. The risk they pose with respect to cognitive impairment can have safety implications. The understanding of the therapeutic options in the management of diabetic workers, blood glucose awareness training, and self-monitoring blood glucose will help to mitigate this risk. Employment decisions must also take into account the extent to which the jobs performed by the worker are safety sensitive. A risk assessment matrix, based on the extent to which a job is considered safety sensitive and based on the severity of the hypoglycaemia, may assist in determining one's fitness to work. Support at the workplace, such as a provision of healthy food options and arrangements for affected workers will be helpful for such workers. Arrangements include permission to carry and consume emergency sugar, flexible meal times, self-monitoring blood glucose when required, storage/disposal facilities for medicine such as insulin and needles, time off for medical appointments, and structured self-help programs.

Diabetes Management and Hypoglycemia in Safety Sensitive Jobs

PubMed Central

Koh, David; Chui, Winnie KL; Sum, Chee-Fang

2011-01-01

The majority of people diagnosed with diabetes mellitus are in the working age group in developing countries. The interrelationship of diabetes and work, that is, diabetes affecting work and work affecting diabetes, becomes an important issue for these people. Therapeutic options for the diabetic worker have been developed, and currently include various insulins, insulin sensitizers and secretagogues, incretin mimetics and enhancers, and alpha glucosidase inhibitors. Hypoglycemia and hypoglycaemic unawareness are important and unwanted treatment side effects. The risk they pose with respect to cognitive impairment can have safety implications. The understanding of the therapeutic options in the management of diabetic workers, blood glucose awareness training, and self-monitoring blood glucose will help to mitigate this risk. Employment decisions must also take into account the extent to which the jobs performed by the worker are safety sensitive. A risk assessment matrix, based on the extent to which a job is considered safety sensitive and based on the severity of the hypoglycaemia, may assist in determining one's fitness to work. Support at the workplace, such as a provision of healthy food options and arrangements for affected workers will be helpful for such workers. Arrangements include permission to carry and consume emergency sugar, flexible meal times, self-monitoring blood glucose when required, storage/disposal facilities for medicine such as insulin and needles, time off for medical appointments, and structured self-help programs. PMID:22953182

The art of appropriate evaluation : a guide for highway safety program managers

DOT National Transportation Integrated Search

2008-08-01

The guide, updated from its original release in 1999, is intended for project managers who will oversee the evaluation of traffic safety programs. It describes the benefits of evaluation and provides an overview of the steps involved. The guide inclu...

The art of appropriate evaluation : a guide for highway safety program managers

DOT National Transportation Integrated Search

2008-12-01

The guide, updated from its original release in 1999, is intended for project managers who will oversee the evaluation of traffic safety programs. It describes the benefits of evaluation and provides an overview of the steps involved. The guide inclu...

NASA aviation safety program aircraft engine health management data mining tools roadmap

DOT National Transportation Integrated Search

2000-04-01

Aircraft Engine Health Management Data Mining Tools is a project led by NASA Glenn Research Center in support of the NASA Aviation Safety Program's Aviation System Monitoring and Modeling Thrust. The objective of the Glenn-led effort is to develop en...

Improving staff perception of a safety climate with crew resource management training.

PubMed

Kuy, SreyRam; Romero, Ramon A L

2017-06-01

Communication failure is one of the top root causes in patient safety adverse events. Crew resource management (CRM) is a team building communication process intended to improve patient safety by improving team dynamics. First, to describe implementation of CRM in a Veterans Affair (VA) surgical service. Second, to assess whether staff CRM training is related to improvement in staff perception of a safety climate. Mandatory CRM training was implemented for all surgical service staff at a VA Hospital at 0 and 12 mo. Safety climate questionnaires were completed by operating room staff at a baseline, 6 and 12 mo after the initial CRM training. Participants reported improvement on all 27 points on the safety climate questionnaire at 6 mo compared with the baseline. At 12 mo, there was sustained improvement in 23 of the 27 areas. This is the first published report about the effect of CRM training on staff perception of a safety climate in a VA surgical service. We demonstrate that CRM training can be successfully implemented widespread in a surgical program. Overall, there was improvement in 100% of areas assessed on the safety climate questionnaire at 6 mo after CRM training. By 1 y, this improvement was sustained in 23 of 27 areas, with the areas of greatest improvement being the performance of briefings, collaboration between nurses and doctors, valuing nursing input, knowledge about patient safety, and institutional promotion of a patient safety climate. Published by Elsevier Inc.

The effects of crew resource management on teamwork and safety climate at Veterans Health Administration facilities.

PubMed

Schwartz, Miriam E; Welsh, Deborah E; Paull, Douglas E; Knowles, Regina S; DeLeeuw, Lori D; Hemphill, Robin R; Essen, Keith E; Sculli, Gary L

2017-11-09

Communication failure is a significant source of adverse events in health care and a leading root cause of sentinel events reported to the Joint Commission. The Veterans Health Administration National Center for Patient Safety established Clinical Team Training (CTT) as a comprehensive program to enhance patient safety and to improve communication and teamwork among health care professionals. CTT is based on techniques used in aviation's Crew Resource Management (CRM) training. The aviation industry has reached a significant safety record in large part related to the culture change generated by CRM and sustained by its recurrent implementation. This article focuses on the improvement of communication, teamwork, and patient safety by utilizing a standardized, CRM-based, interprofessional, immersive training in diverse clinical areas. The Teamwork and Safety Climate Questionnaire was used to evaluate safety climate before and after CTT. The scores for all of the 27 questions on the questionnaire showed an increase from baseline to 12 months, and 11 of those increases were statistically significant. A recurrent training is recommended to maintain the positive outcomes. CTT enhances patient safety and reduces risk of patient harm by improving teamwork and facilitating clear, concise, specific and timely communication among health care professionals. © 2017 American Society for Healthcare Risk Management of the American Hospital Association.

41 CFR 102-80.10 - What are the basic safety and environmental management policies for real property?

Code of Federal Regulations, 2014 CFR

2014-01-01

... 41 Public Contracts and Property Management 3 2014-01-01 2014-01-01 false What are the basic safety and environmental management policies for real property? 102-80.10 Section 102-80.10 Public Contracts and Property Management Federal Property Management Regulations System (Continued) FEDERAL...

[Improving blood safety: errors management in transfusion medicine].

PubMed

Bujandrić, Nevenka; Grujić, Jasmina; Krga-Milanović, Mirjana

2014-01-01

The concept of blood safety includes the entire transfusion chain starting with the collection of blood from the blood donor, and ending with blood transfusion to the patient. The concept involves quality management system as the systematic monitoring of adverse reactions and incidents regarding the blood donor or patient. Monitoring of near-miss errors show the critical points in the working process and increase transfusion safety. The aim of the study was to present the analysis results of adverse and unexpected events in transfusion practice with a potential risk to the health of blood donors and patients. One-year retrospective study was based on the collection, analysis and interpretation of written reports on medical errors in the Blood Transfusion Institute of Vojvodina. Errors were distributed according to the type, frequency and part of the working process where they occurred. Possible causes and corrective actions were described for each error. The study showed that there were not errors with potential health consequences for the blood donor/patient. Errors with potentially damaging consequences for patients were detected throughout the entire transfusion chain. Most of the errors were identified in the preanalytical phase. The human factor was responsible for the largest number of errors. Error reporting system has an important role in the error management and the reduction of transfusion-related risk of adverse events and incidents. The ongoing analysis reveals the strengths and weaknesses of the entire process and indicates the necessary changes. Errors in transfusion medicine can be avoided in a large percentage and prevention is cost-effective, systematic and applicable.

Does classroom-based Crew Resource Management training improve patient safety culture? A systematic review

PubMed Central

de Bruijne, Martine C; Zwijnenberg, Nicolien C; Jansma, Elise P; van Dyck, Cathy; Wagner, Cordula

2014-01-01

Aim: To evaluate the evidence of the effectiveness of classroom-based Crew Resource Management training on safety culture by a systematic review of literature. Methods: Studies were identified in PubMed, Cochrane Library, PsycINFO, and Educational Resources Information Center up to 19 December 2012. The Methods Guide for Comparative Effectiveness Reviews was used to assess the risk of bias in the individual studies. Results: In total, 22 manuscripts were included for review. Training settings, study designs, and evaluation methods varied widely. Most studies reporting only a selection of culture dimensions found mainly positive results, whereas studies reporting all safety culture dimensions of the particular survey found mixed results. On average, studies were at moderate risk of bias. Conclusion: Evidence of the effectiveness of Crew Resource Management training in health care on safety culture is scarce and the validity of most studies is limited. The results underline the necessity of more valid study designs, preferably using triangulation methods. PMID:26770720

Industrial Safety. MAS-123. Waste Isolation Division (WID). Management and Supervisor Training (MAST) Program.

ERIC Educational Resources Information Center

Westinghouse Electric Corp., Carlsbad, NM.

This learning module, which is part of a management and supervisor training program for managers and supervisors employed at the Department of Energy's Waste Isolation Division, is designed to prepare trainees to promote and monitor the industrial safety program at their plant. The following topics are covered in the module's individual sections:…

DOT's Budget: Safety, Management, and Other Issues Facing the Department in Fiscal Year 1998 and Beyond

DOT National Transportation Integrated Search

1997-03-06

This testimony discusses key resource management issues and performance challenges facing the Department of Transportation in 1998 and beyond. 1. Increased safety and security concerns prompted by accidents and maintenance issues. 2. Important manage...

NASA Safety Manual. Volume 3: System Safety

NASA Technical Reports Server (NTRS)

1970-01-01

This Volume 3 of the NASA Safety Manual sets forth the basic elements and techniques for managing a system safety program and the technical methods recommended for use in developing a risk evaluation program that is oriented to the identification of hazards in aerospace hardware systems and the development of residual risk management information for the program manager that is based on the hazards identified. The methods and techniques described in this volume are in consonance with the requirements set forth in NHB 1700.1 (VI), Chapter 3. This volume and future volumes of the NASA Safety Manual shall not be rewritten, reprinted, or reproduced in any manner. Installation implementing procedures, if necessary, shall be inserted as page supplements in accordance with the provisions of Appendix A. No portion of this volume or future volumes of the NASA Safety Manual shall be invoked in contracts.

The transferability of safety-driven access management models for application to other sites.

DOT National Transportation Integrated Search

2001-01-01

Several research studies have produced mathematical models that predict the safety impacts of selected access management techniques. Since new models require substantial resources to construct, this study evaluated five existing models with regard to...

Environment, Health, and Safety | NREL

Science.gov Websites

property, and the environment. View the Environmental Stewardship, Health, Safety, and Quality Management (OHSAS) 18001 certification demonstrates NREL's commitment to a health and safety management system that into all activities. NREL's staff and management are committed to managing health and safety risk

Risk Management Plans: are they a tool for improving drug safety?

PubMed

Frau, Serena; Font Pous, Maria; Luppino, Maria Rosa; Conforti, Anita

2010-08-01

In 2005, new European legislation authorised Regulatory Agencies to require drug companies to submit a risk management plan (RMP) comprising detailed commitments for post-marketing pharmacovigilance. The aim of the study is to describe the characteristics of RMP for 15 drugs approved by the European Medicines Agency (EMA) and their impact on post-marketing safety issues. Of the 90 new Chemical Entities approved through a centralised procedure by the EMA during 2006 and 2007, 15 of them were selected and their safety aspects and relative RMPs analysed. All post-marketing communications released for safety reasons related to these drugs were also considered. A total of 157 safety specifications were established for the drugs assessed. Risk minimisation activities were foreseen for 5 drugs as training activities. Post-marketing safety issues emerged for 12 of them, leading to 39 type II variations in Summary of Product Characteristics (SPC). Nearly half of such variations, 19 (49%), concerned safety aspects not envisaged by the RMPs. Besides this, 9 Safety Communications were published for 6 out of 15 drugs assessed. The present study reveals several critical points on the way RMPs have been implemented. Several activities proposed by the RMPs do not appear to be adequate in dealing with the potential risks of drugs. Poor communication of risk to practitioners and to the public, and above all limited transparency for the total assessment of risk, seem to transform RMPs into a tool to reassure the public when inadequately evaluated drugs are granted premature marketing authorisation.

From aviation to medicine: applying concepts of aviation safety to risk management in ambulatory care.

PubMed

Wilf-Miron, R; Lewenhoff, I; Benyamini, Z; Aviram, A

2003-02-01

The development of a medical risk management programme based on the aviation safety approach and its implementation in a large ambulatory healthcare organisation is described. The following key safety principles were applied: (1). errors inevitably occur and usually derive from faulty system design, not from negligence; (2). accident prevention should be an ongoing process based on open and full reporting; (3). major accidents are only the "tip of the iceberg" of processes that indicate possibilities for organisational learning. Reporting physicians were granted immunity, which encouraged open reporting of errors. A telephone "hotline" served the medical staff for direct reporting and receipt of emotional support and medical guidance. Any adverse event which had learning potential was debriefed, while focusing on the human cause of error within a systemic context. Specific recommendations were formulated to rectify processes conducive to error when failures were identified. During the first 5 years of implementation, the aviation safety concept and tools were successfully adapted to ambulatory care, fostering a culture of greater concern for patient safety through risk management while providing support to the medical staff.

Connected vehicle pilot deployment program phase 1, safety management plan – Tampa (THEA).

DOT National Transportation Integrated Search

2016-04-01

This document presents the Safety Management Plan for the THEA Connected Vehicle (CV) Pilot Deployment. The THEA CV Pilot Deployment goal is to advance and enable safe, interoperable, networked wireless communications among vehicles, the infrastructu...

Leadership for safety: industrial experience.

PubMed

Flin, R; Yule, S

2004-12-01

The importance of leadership for effective safety management has been the focus of research attention in industry for a number of years, especially in energy and manufacturing sectors. In contrast, very little research into leadership and safety has been carried out in medical settings. A selective review of the industrial safety literature for leadership research with possible application in health care was undertaken. Emerging findings show the importance of participative, transformational styles for safety performance at all levels of management. Transactional styles with attention to monitoring and reinforcement of workers' safety behaviours have been shown to be effective at the supervisory level. Middle managers need to be involved in safety and foster open communication, while ensuring compliance with safety systems. They should allow supervisors a degree of autonomy for safety initiatives. Senior managers have a prime influence on the organisation's safety culture. They need to continuously demonstrate a visible commitment to safety, best indicated by the time they devote to safety matters.

Leadership for safety: industrial experience

PubMed Central

Flin, R; Yule, S

2004-01-01

The importance of leadership for effective safety management has been the focus of research attention in industry for a number of years, especially in energy and manufacturing sectors. In contrast, very little research into leadership and safety has been carried out in medical settings. A selective review of the industrial safety literature for leadership research with possible application in health care was undertaken. Emerging findings show the importance of participative, transformational styles for safety performance at all levels of management. Transactional styles with attention to monitoring and reinforcement of workers' safety behaviours have been shown to be effective at the supervisory level. Middle managers need to be involved in safety and foster open communication, while ensuring compliance with safety systems. They should allow supervisors a degree of autonomy for safety initiatives. Senior managers have a prime influence on the organisation's safety culture. They need to continuously demonstrate a visible commitment to safety, best indicated by the time they devote to safety matters. PMID:15576692

30 CFR 285.810 - What must I include in my Safety Management System?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Environmental and Safety Management, Inspections, and Facility Assessments for Activities Conducted Under SAPs... under § 285.627(d)) and, when required by this part, your SAP (as provided in § 285.614(b)) or GAP (as...

Echocardiography-based hemodynamic management of left ventricular diastolic dysfunction: a feasibility and safety study.

PubMed

Shillcutt, Sasha K; Montzingo, Candice R; Agrawal, Ankit; Khaleel, Maseeha S; Therrien, Stacey L; Thomas, Walker R; Porter, Thomas R; Brakke, Tara R

2014-11-01

Patients with left ventricular diastolic dysfunction (LVDD) are at increased risk of postoperative adverse events. The primary aim of this study was to evaluate the safety and feasibility of using echocardiography-guided hemodynamic management (EGHEM) during surgery in subjects with LVDD compared to conventional management. The feasibility of using echocardiography to direct a treatment algorithm and clinical outcomes were compared for safety between groups. Subjects were screened for LVDD by preoperative transthoracic echocardiography (TTE) and randomized to the conventional or EGHEM group. Subjects in EGHEM received hemodynamic management based on left ventricular filling patterns on transesophageal echocardiography (TEE). Primary outcomes measured were the feasibility to obtain TEE images and follow a TEE-based treatment algorithm. Safety outcomes also compared the following clinical differences between groups: length of hospitalization, incidence of atrial fibrillation, congestive heart failure (CHF), myocardial infarction, cerebrovascular accident, transient ischemic attack and renal failure measured 30 days postoperatively. Population consisted of 28 surgical subjects (14 in conventional group and 14 in EGHEM group). Mean subject age was 73.4 ± 6.7 years (36% male) in conventional group and 65.9 ± 14.4 years (36% male) in EGHEM group. Procedures included orthopedic (conventional = 29%, EGHEM 36%), general (conventional = 50%, EGHEM = 36%), vascular (conventional = 7%, EGHEM = 21%), and thoracic (conventional = 14%, EGHEM = 7%). There was no statistically significant difference in adverse clinical events between the 2 groups. The EGHEM group had less CHF, atrial fibrillation, and shorter length of stay. Echocardiography-guided hemodynamic management of patients with LVDD during surgery is feasible and may be a safe alternative to conventional management. © 2014, Wiley Periodicals, Inc.

Food Safety Crisis Management-A Comparison between Germany and the Netherlands.

PubMed

van Asselt, E D; van der Fels-Klerx, H J; Breuer, O; Helsloot, I

2017-02-01

In order to prevent food safety incidents from becoming a crisis, a good crisis management structure is essential. The aim of the current study was to compare and evaluate the national food incident response plans of 2 neighboring EU Member States: Germany and the Netherlands. This revealed that the structure of these plans is comparable, starting with initial alerting, assessment of the problem, upscaling, an execution phase and finally an evaluation of the crisis management. However, the German communication structure is more complex than the Dutch one and cross-border communication between both countries is currently limited. In general, the presence of national response plans does not guarantee a good and swift response to a food safety incident as this is often hampered by difficulties in tracing the source of the problem as well as difficulties in communication between organizations involved in crisis management. A timely detection can be improved through the development of fast screening and detecting systems and through combining various data sources using computer software systems. Mutual cooperation and communication can be improved through joint exercises or projects. This will help to streamline communication toward consumers and trade partners. Such communication should be transparent relaying not only the facts but also the uncertainties in a crisis in order to gain consumer trust and safeguard international trade. © 2017 Institute of Food Technologists®.

Development, Dissemination, and Assessment of a Food Safety Systems Management Curriculum for Agribusiness Students in Armenia

ERIC Educational Resources Information Center

Pokharel, Siroj; Marcy, Joseph E.; Neilan, Angela M.; Cutter, Catherine N.

2017-01-01

This study addresses the development, dissemination, and assessment of a Food Safety System Management (FSSM) curriculum offered to college-aged, agribusiness students in Yerevan, Armenia. Prior to beginning the program, demographic data were collected and a paper-based pretest was administered to access the food safety knowledge, behavior, and…

RMP Guidance for Warehouses - Chapter 6: Prevention Program (Program 2)

EPA Pesticide Factsheets

If substances you have above threshold are not covered by OSHA's PSM standard, you have a Program 2 process. Your prevention program must include safety information, hazard review, SOPs, training, maintenance, compliance audits, and incident investigation.

Passive (Micro-) Seismic Event Detection by Identifying Embedded "Event" Anomalies Within Statistically Describable Background Noise

NASA Astrophysics Data System (ADS)

Baziw, Erick; Verbeek, Gerald

2012-12-01

Among engineers there is considerable interest in the real-time identification of "events" within time series data with a low signal to noise ratio. This is especially true for acoustic emission analysis, which is utilized to assess the integrity and safety of many structures and is also applied in the field of passive seismic monitoring (PSM). Here an array of seismic receivers are used to acquire acoustic signals to monitor locations where seismic activity is expected: underground excavations, deep open pits and quarries, reservoirs into which fluids are injected or from which fluids are produced, permeable subsurface formations, or sites of large underground explosions. The most important element of PSM is event detection: the monitoring of seismic acoustic emissions is a continuous, real-time process which typically runs 24 h a day, 7 days a week, and therefore a PSM system with poor event detection can easily acquire terabytes of useless data as it does not identify crucial acoustic events. This paper outlines a new algorithm developed for this application, the so-called SEED™ (Signal Enhancement and Event Detection) algorithm. The SEED™ algorithm uses real-time Bayesian recursive estimation digital filtering techniques for PSM signal enhancement and event detection.

A strategic management model for evaluation of health, safety and environmental performance.

PubMed

Abbaspour, Majid; Toutounchian, Solmaz; Roayaei, Emad; Nassiri, Parvin

2012-05-01

Strategic health, safety, and environmental management system (HSE-MS) involves systematic and cooperative planning in each phase of the lifecycle of a project to ensure that interaction among the industry group, client, contractor, stakeholder, and host community exists with the highest level of health, safety, and environmental standard performances. Therefore, it seems necessary to assess the HSE-MS performance of contractor(s) by a comparative strategic management model with the aim of continuous improvement. The present Strategic Management Model (SMM) has been illustrated by a case study and the results show that the model is a suitable management tool for decision making in a contract environment, especially in oil and gas fields and based on accepted international standards within the framework of management deming cycle. To develop this model, a data bank has been created, which includes the statistical data calculated by converting the HSE performance qualitative data into quantitative values. Based on this fact, the structure of the model has been formed by defining HSE performance indicators according to the HSE-MS model. Therefore, 178 indicators have been selected which have been grouped into four attributes. Model output provides quantitative measures of HSE-MS performance as a percentage of an ideal level with maximum possible score for each attribute. Defining the strengths and weaknesses of the contractor(s) is another capability of this model. On the other hand, this model provides a ranking that could be used as the basis for decision making at the contractors' pre-qualification phase or during the execution of the project.