Selecting landscape metrics as indicators of spatial heterogeneity-A comparison among Greek landscapes

NASA Astrophysics Data System (ADS)

Plexida, Sofia G.; Sfougaris, Athanassios I.; Ispikoudis, Ioannis P.; Papanastasis, Vasilios P.

2014-02-01

This paper investigates the spatial heterogeneity of three landscapes along an altitudinal gradient and different human land use. The main aim was the identification of appropriate landscape indicators using different extents. ASTER image was used to create a land cover map consisting of three landscapes which differed in altitude and land use. A number of landscape metrics quantifying patch complexity, configuration, diversity and connectivity were derived from the thematic map at the landscape level. There were significant differences among the three landscapes regarding these four aspects of landscape heterogeneity. The analysis revealed a specific pattern of land use where lowlands are being increasingly utilized by humans (percentage of agricultural land = 65.84%) characterized by physical connectedness (high values of Patch Cohesion Index) and relatively simple geometries (low values of fractal dimension index). The landscape pattern of uplands was found to be highly diverse based upon the Shannon Diversity index. After selecting the scale (600 ha) where metrics values stabilized, it was shown that metrics were more correlated at the small scale of 60 ha. From the original 24 metrics, 14 individual metrics with high Spearman correlation coefficient and Variance Inflation Factor criterion were eliminated, leaving 10 representative metrics for subsequent analysis. Data reduction analysis showed that Patch Density, Area-Weighted Mean Fractal Dimension Index and Patch Cohesion Index are suitable to describe landscape patterns irrespective of the scale. A systematic screening of these metrics could enhance a deeper understanding of the results obtained by them and contribute to a sustainable landscape management of Mediterranean landscapes.

WHAT INFORMATION DO WE HAVE TO IDENTIFY AND EVALUATE ECOLOGICAL METRICS AND INDICATORS THAT DIRECTLY MATTER TO PEOPLE?

EPA Science Inventory

The use of ecological metrics and indicators that matter directly to people makes ecological information more useful. By more useful we mean in communication with people and for social and economic analysis. While the need to specify these metrics and indicators is a view widely ...

The challenge of defining risk-based metrics to improve food safety: inputs from the BASELINE project.

PubMed

Manfreda, Gerardo; De Cesare, Alessandra

2014-08-01

In 2002, the Regulation (EC) 178 of the European Parliament and of the Council states that, in order to achieve the general objective of a high level of protection of human health and life, food law shall be based on risk analysis. However, the Commission Regulation No 2073/2005 on microbiological criteria for foodstuffs requires that food business operators ensure that foodstuffs comply with the relevant microbiological criteria. Such criteria define the acceptability of a product, a batch of foodstuffs or a process, based on the absence, presence or number of micro-organisms, and/or on the quantity of their toxins/metabolites, per unit(s) of mass, volume, area or batch. The same Regulation describes a food safety criterion as a mean to define the acceptability of a product or a batch of foodstuff applicable to products placed on the market; moreover, it states a process hygiene criterion as a mean indicating the acceptable functioning of the production process. Both food safety criteria and process hygiene criteria are not based on risk analysis. On the contrary, the metrics formulated by the Codex Alimentarius Commission in 2004, named Food Safety Objective (FSO) and Performance Objective (PO), are risk-based and fit the indications of Regulation 178/2002. The main aims of this review are to illustrate the key differences between microbiological criteria and the risk-based metrics defined by the Codex Alimentarius Commission and to explore the opportunity and also the possibility to implement future European Regulations including PO and FSO as supporting parameters to microbiological criteria. This review clarifies also the implications of defining an appropriate level of human protection, how to establish FSO and PO and how to implement them in practice linked to each other through quantitative risk assessment models. The contents of this review should clarify the context for application of the results collected during the EU funded project named BASELINE (www

Indicators of safety compromise in gastrointestinal endoscopy.

PubMed

Borgaonkar, Mark Ram; Hookey, Lawrence; Hollingworth, Roger; Kuipers, Ernst J; Forster, Alan; Armstrong, David; Barkun, Alan; Bridges, Ron; Carter, Rose; de Gara, Chris; Dube, Catherine; Enns, Robert; Macintosh, Donald; Forget, Sylviane; Leontiadis, Grigorios; Meddings, Jonathan; Cotton, Peter; Valori, Roland

2012-02-01

The importance of quality indicators has become increasingly recognized in gastrointestinal endoscopy. Patient safety requires the identification and monitoring of occurrences associated with harm or the potential for harm. The identification of relevant indicators of safety compromise is, therefore, a critical element that is key to the effective implementation of endoscopy quality improvement programs. To identify key indicators of safety compromise in gastrointestinal endoscopy. The Canadian Association of Gastroenterology Safety and Quality Indicators in Endoscopy Consensus Group was formed to address issues of quality in endoscopy. A subcommittee was formed to identify key safety indicators. A systematic literature review was undertaken, and articles pertinent to safety in endoscopy were identified and reviewed. All complications and measures used to document safety were recorded. From this, a preliminary list of 16 indicators was compiled and presented to the 35-person consensus group during a three-day meeting. A revised list of 20 items was subsequently put to the consensus group for vote for inclusion on the final list of safety indicators. Items were retained only if the consensus group highly agreed on their importance. A total of 19 indicators of safety compromise were retained and grouped into the three following categories: medication-related - the need for CPR, use of reversal agents, hypoxia, hypotension, hypertension, sedation doses in patients older than 70 years of age, allergic reactions and laryngospasm⁄bronchospasm; procedure-related early - perforation, immediate postpolypectomy bleeding, need for hospital admission or transfer to emergency department from the gastroenterology unit, instrument impaction, severe persistent abdominal pain requiring evaluation proven to not be perforation; and procedure-related delayed - death within 30 days of procedure, 14-day unplanned hospitalization, 14-day unplanned contact with a health provider

USING BROAD-SCALE METRICS TO DEVELOP INDICATORS OF WATERSHED VULNERABILITY IN THE OZARK MOUNTAINS (USA)

EPA Science Inventory

Multiple broad-scale landscape metrics were tested as potential indicators of total phosphorus (TP) concentration, total ammonia (TA) concentration, and Escherichia coli (E. coli) bacteria count, among 244 sub-watersheds in the Ozark Mountains (USA). Indicator models were develop...

Macroinvertebrate and diatom metrics as indicators of water-quality conditions in connected depression wetlands in the Mississippi Alluvial Plain

USGS Publications Warehouse

Justus, Billy; Burge, David; Cobb, Jennifer; Marsico, Travis; Bouldin, Jennifer

2016-01-01

Methods for assessing wetland conditions must be established so wetlands can be monitored and ecological services can be protected. We evaluated biological indices compiled from macroinvertebrate and diatom metrics developed primarily for streams to assess their ability to indicate water quality in connected depression wetlands. We collected water-quality and biological samples at 24 connected depressions dominated by water tupelo (Nyssa aquatica) or bald cypress (Taxodium distichum) (water depths = 0.5–1.0 m). Water quality of the least-disturbed connected depressions was characteristic of swamps in the southeastern USA, which tend to have low specific conductance, nutrient concentrations, and pH. We compared 162 macroinvertebrate metrics and 123 diatom metrics with a water-quality disturbance gradient. For most metrics, we evaluated richness, % richness, abundance, and % relative abundance values. Three of the 4 macroinvertebrate metrics that were most beneficial for identifying disturbance in connected depressions decreased along the disturbance gradient even though they normally increase relative to stream disturbance. The negative relationship to disturbance of some taxa (e.g., dipterans, mollusks, and crustaceans) that are considered tolerant in streams suggests that the tolerance scale for some macroinvertebrates can differ markedly between streams and wetlands. Three of the 4 metrics chosen for the diatom index reflected published tolerances or fit the usual perception of metric response to disturbance. Both biological indices may be useful in connected depressions elsewhere in the Mississippi Alluvial Plain Ecoregion and could have application in other wetland types. Given the paradoxical relationship of some macroinvertebrate metrics to dissolved O2 (DO), we suggest that the diatom metrics may be easier to interpret and defend for wetlands with low DO concentrations in least-disturbed conditions.

Integration of Health Protection and Health Promotion: Rationale, Indicators, and Metrics

PubMed Central

Sorensen, Glorian; McLellan, Deborah; Dennerlein, Jack T.; Pronk, Nicolaas P.; Allen, Jennifer D.; Boden, Leslie I.; Okechukwu, Cassandra A.; Hashimoto, Dean; Stoddard, Anne; Wagner, Gregory R

2014-01-01

Objective To offer a definition of an “integrated” approach to worker health and operationalize this definition using indicators of the extent to which integrated efforts are implemented in an organization. Methods Guided by the question, “How will we know it when we see it?” we reviewed relevant literature to identify available definitions and metrics, and used a modified-Delphi process to review and refine indicators and measures of integrated approaches. Results A definition of integrated approaches to worker health is proposed and accompanied by indicators and measures that may be used by researchers, employers and workers. Conclusions A shared understanding of what is meant by integrated approaches to protect and promote worker health has the potential to improve dialogue among researchers and facilitate the research-to-practice process. PMID:24284762

Metrication report to the Congress

NASA Technical Reports Server (NTRS)

1989-01-01

The major NASA metrication activity of 1988 concerned the Space Station. Although the metric system was the baseline measurement system for preliminary design studies, solicitations for final design and development of the Space Station Freedom requested use of the inch-pound system because of concerns with cost impact and potential safety hazards. Under that policy, however use of the metric system would be permitted through waivers where its use was appropriate. Late in 1987, several Department of Defense decisions were made to increase commitment to the metric system, thereby broadening the potential base of metric involvement in the U.S. industry. A re-evaluation of Space Station Freedom units of measure policy was, therefore, initiated in January 1988.

Advanced Life Support System Value Metric

NASA Technical Reports Server (NTRS)

Jones, Harry W.; Rasky, Daniel J. (Technical Monitor)

1999-01-01

The NASA Advanced Life Support (ALS) Program is required to provide a performance metric to measure its progress in system development. Extensive discussions within the ALS program have led to the following approach. The Equivalent System Mass (ESM) metric has been traditionally used and provides a good summary of the weight, size, and power cost factors of space life support equipment. But ESM assumes that all the systems being traded off exactly meet a fixed performance requirement, so that the value and benefit (readiness, performance, safety, etc.) of all the different systems designs are considered to be exactly equal. This is too simplistic. Actual system design concepts are selected using many cost and benefit factors and the system specification is defined after many trade-offs. The ALS program needs a multi-parameter metric including both the ESM and a System Value Metric (SVM). The SVM would include safety, maintainability, reliability, performance, use of cross cutting technology, and commercialization potential. Another major factor in system selection is technology readiness level (TRL), a familiar metric in ALS. The overall ALS system metric that is suggested is a benefit/cost ratio, SVM/[ESM + function (TRL)], with appropriate weighting and scaling. The total value is given by SVM. Cost is represented by higher ESM and lower TRL. The paper provides a detailed description and example application of a suggested System Value Metric and an overall ALS system metric.

Advanced Life Support System Value Metric

NASA Technical Reports Server (NTRS)

Jones, Harry W.; Arnold, James O. (Technical Monitor)

1999-01-01

The NASA Advanced Life Support (ALS) Program is required to provide a performance metric to measure its progress in system development. Extensive discussions within the ALS program have reached a consensus. The Equivalent System Mass (ESM) metric has been traditionally used and provides a good summary of the weight, size, and power cost factors of space life support equipment. But ESM assumes that all the systems being traded off exactly meet a fixed performance requirement, so that the value and benefit (readiness, performance, safety, etc.) of all the different systems designs are exactly equal. This is too simplistic. Actual system design concepts are selected using many cost and benefit factors and the system specification is then set accordingly. The ALS program needs a multi-parameter metric including both the ESM and a System Value Metric (SVM). The SVM would include safety, maintainability, reliability, performance, use of cross cutting technology, and commercialization potential. Another major factor in system selection is technology readiness level (TRL), a familiar metric in ALS. The overall ALS system metric that is suggested is a benefit/cost ratio, [SVM + TRL]/ESM, with appropriate weighting and scaling. The total value is the sum of SVM and TRL. Cost is represented by ESM. The paper provides a detailed description and example application of the suggested System Value Metric.

Use of social media in health promotion: purposes, key performance indicators, and evaluation metrics.

PubMed

Neiger, Brad L; Thackeray, Rosemary; Van Wagenen, Sarah A; Hanson, Carl L; West, Joshua H; Barnes, Michael D; Fagen, Michael C

2012-03-01

Despite the expanding use of social media, little has been published about its appropriate role in health promotion, and even less has been written about evaluation. The purpose of this article is threefold: (a) outline purposes for social media in health promotion, (b) identify potential key performance indicators associated with these purposes, and (c) propose evaluation metrics for social media related to the key performance indicators. Process evaluation is presented in this article as an overarching evaluation strategy for social media.

Experimental constraints on metric and non-metric theories of gravity

NASA Technical Reports Server (NTRS)

Will, Clifford M.

1989-01-01

Experimental constraints on metric and non-metric theories of gravitation are reviewed. Tests of the Einstein Equivalence Principle indicate that only metric theories of gravity are likely to be viable. Solar system experiments constrain the parameters of the weak field, post-Newtonian limit to be close to the values predicted by general relativity. Future space experiments will provide further constraints on post-Newtonian gravity.

Early Warning Look Ahead Metrics: The Percent Milestone Backlog Metric

NASA Technical Reports Server (NTRS)

Shinn, Stephen A.; Anderson, Timothy P.

2017-01-01

All complex development projects experience delays and corresponding backlogs of their project control milestones during their acquisition lifecycles. NASA Goddard Space Flight Center (GSFC) Flight Projects Directorate (FPD) teamed with The Aerospace Corporation (Aerospace) to develop a collection of Early Warning Look Ahead metrics that would provide GSFC leadership with some independent indication of the programmatic health of GSFC flight projects. As part of the collection of Early Warning Look Ahead metrics, the Percent Milestone Backlog metric is particularly revealing, and has utility as a stand-alone execution performance monitoring tool. This paper describes the purpose, development methodology, and utility of the Percent Milestone Backlog metric. The other four Early Warning Look Ahead metrics are also briefly discussed. Finally, an example of the use of the Percent Milestone Backlog metric in providing actionable insight is described, along with examples of its potential use in other commodities.

A comparison of leading and lagging indicators of safety in naval aviation.

PubMed

O'Connor, Paul; Cowan, Shawn; Alton, Jeffrey

2010-07-01

The purpose of this paper is to examine the results of two different methods of identifying human factors safety concerns in U.S. Naval aviation. In both studies, the information was collected using the Department of Defense Human Factors Analysis and Classification System (DoD-HFACS). In the first study, aviation mishap data (a lagging indictor) was obtained on 47 F/A-18 and 16 H-60 mishaps. In the second study, the responses of 68 squadrons to a survey regarding the human factors issues that they considered to be of the greatest safety concern were examined (a leading indicator). First study results revealed that skill-based errors were the most commonly cited factors for both F/A-18 and H-60 mishaps (70.2% and 81.3%, respectively). More specifically, the most commonly used nanocodes were 'over control/ under control' (27.7% and 56.3%, respectively), 'breakdown in visual scan' (27.7% and 12.5%, respectively), and 'procedural errors' (23.4% and 37.6%, respectively). The second study identified that the main concern of F/A-18 and H-60 aviators was workload and operational tempo (identified by 85% of squadrons). It can be concluded that the nanocodes that were most commonly used to classify the causes of past mishaps were not identified as major concerns by the squadrons who responded to the survey. The findings from these studies emphasize the importance of examining a number of performance metrics to ensure that effective measures are being taken to improve safety.

Let's Make Metric Ice Cream

ERIC Educational Resources Information Center

Zimmerman, Marianna

1975-01-01

Describes a classroom activity which involved sixth grade students in a learning situation including making ice cream, safety procedures in a science laboratory, calibrating a thermometer, using metric units of volume and mass. (EB)

Indicators of School Crime and Safety: 2001.

ERIC Educational Resources Information Center

Kaufman, Phillip; Chen, Xianglei; Choy, Susan P.; Peter, Katharin; Ruddy, Sally A.; Miller, Amanda K.; Fleury, Jill K.; Chandler, Kathryn A.; Planty, Michael G.; Rand, Michael R.

2001-01-01

Presents the latest indicator data on school crime and student safety, including updates on student and teacher victimization, weapons and fights at school, students' alcohol and marijuana use, and students' reports of drug availability at school. Data present a mixed picture of school safety, with a decline in overall crime rates but continued…

A road safety performance indicator for vehicle fleet compatibility.

PubMed

Christoph, Michiel; Vis, Martijn Alexander; Rackliff, Lucy; Stipdonk, Henk

2013-11-01

This paper discusses the development and the application of a safety performance indicator which measures the intrinsic safety of a country's vehicle fleet related to fleet composition. The indicator takes into account both the 'relative severity' of individual collisions between different vehicle types, and the share of those vehicle types within a country's fleet. The relative severity is a measure for the personal damage that can be expected from a collision between two vehicles of any type, relative to that of a collision between passenger cars. It is shown how this number can be calculated using vehicle mass only. A sensitivity analysis is performed to study the dependence of the indicator on parameter values and basic assumptions made. The indicator is easy to apply and satisfies the requirements for appropriate safety performance indicators. It was developed in such a way that it specifically scores the intrinsic safety of a fleet due to its composition, without being influenced by other factors, like helmet wearing. For the sake of simplicity, and since the required data is available throughout Europe, the indicator was applied to the relative share of three of the main vehicle types: passenger cars, heavy goods vehicles and motorcycles. Using the vehicle fleet data from 13EU Member States and Norway, the indicator was used to rank the countries' safety performance. The UK was found to perform best in terms of its fleet composition (value is 1.07), while Greece has the worst performance with the highest indicator value (1.41). Copyright © 2013 Elsevier Ltd. All rights reserved.

49 CFR 176.704 - Requirements relating to transport indices and criticality safety indices.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 2 2011-10-01 2011-10-01 false Requirements relating to transport indices and... Requirements relating to transport indices and criticality safety indices. (a) The sum of the transport indices..., transport and unloading are to be supervised by persons qualified in the transport of radioactive material...

49 CFR 176.704 - Requirements relating to transport indices and criticality safety indices.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Requirements relating to transport indices and... Requirements relating to transport indices and criticality safety indices. (a) The sum of the transport indices..., transport and unloading are to be supervised by persons qualified in the transport of radioactive material...

Responses of aquatic macrophytes to anthropogenic pressures: comparison between macrophyte metrics and indices.

PubMed

Camargo, Julio A

2018-02-26

Macrophyte responses to anthropogenic pressures in two rivers of Central Spain were assessed to check if simple metrics can exhibit a greater discriminatory and explanatory power than complex indices at small spatial scales. Field surveys were undertaken during the summer of 2014 (Duraton River) and the spring of 2015 (Tajuña River). Aquatic macrophytes were sampled using a sampling square (45 × 45 cm). In the middle Duraton River, macrophytes responded positively to the presence of a hydropower dam and a small weir, with Myriophyllum spicatum and Potamogeton pectinatus being relatively favored. Index of Macrophytes (IM) was better than Macroscopic Aquatic Vegetation Index (MAVI) and Fluvial Macrophyte Index (FMI) in detecting these responses, showing positive and significant correlations with total coverage, species richness, and species diversity. In the upper Tajuña River, macrophytes responded both negatively and positively to the occurrence of a trout farm effluent and a small weir, with Leptodictyum riparium and Veronica anagallis-aquatica being relatively favored. Although IM, MAVI, and FMI detected both negative and positive responses, correlations of IM with total coverage, species richness, and species diversity were higher. Species evenness was not sensitive enough to detect either positive or negative responses of aquatic macrophytes along the study areas. Overall, traditional and simple metrics (species composition, total coverage, species richness, species diversity) exhibited a greater discriminatory and explanatory power than more recent and complex indices (IM, MAVI, FMI) when assessing responses of aquatic macrophytes to anthropogenic pressures at impacted specific sites.

Identification of an updated set of prescribing-safety indicators for GPs

PubMed Central

Spencer, Rachel; Bell, Brian; Avery, Anthony J; Gookey, Gill; Campbell, Stephen M

2014-01-01

Background Medication error is an important contributor to patient morbidity and mortality and is associated with inadequate patient safety measures. However, prescribing-safety tools specifically designed for use in general practice are lacking. Aim To identify and update a set of prescribing-safety indicators for assessing the safety of prescribing in general practice, and to estimate the risk of harm to patients associated with each indicator. Design and setting RAND/UCLA consensus development of indicators in UK general practice. Method Prescribing indicators were identified from a systematic review and previous consensus exercise. The RAND Appropriateness Method was used to further identify and develop the indicators with an electronic-Delphi method used to rate the risk associated with them. Twelve GPs from all the countries of the UK participated in the RAND exercise, with 11 GPs rating risk using the electronic-Delphi approach. Results Fifty-six prescribing-safety indicators were considered appropriate for inclusion (overall panel median rating of 7–9, with agreement). These indicators cover hazardous prescribing across a range of therapeutic indications, hazardous drug–drug combinations and inadequate laboratory test monitoring. Twenty-three (41%) of these indicators were considered high risk or extreme risk by 80% or more of the participants. Conclusion This study identified a set of 56 indicators that were considered, by a panel of GPs, to be appropriate for assessing the safety of GP prescribing. Twenty-three of these indicators were considered to be associated with high or extreme risk to patients and should be the focus of efforts to improve patient safety. PMID:24686882

16 CFR 1511.8 - Metric references.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Metric references. 1511.8 Section 1511.8 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS... parentheses for convenience and information only. ...

Using a relative health indicator (RHI) metric to estimate health risk reductions in drinking water.

PubMed

Alfredo, Katherine A; Seidel, Chad; Ghosh, Amlan; Roberson, J Alan

2017-03-01

When a new drinking water regulation is being developed, the USEPA conducts a health risk reduction and cost analysis to, in part, estimate quantifiable and non-quantifiable cost and benefits of the various regulatory alternatives. Numerous methodologies are available for cumulative risk assessment ranging from primarily qualitative to primarily quantitative. This research developed a summary metric of relative cumulative health impacts resulting from drinking water, the relative health indicator (RHI). An intermediate level of quantification and modeling was chosen, one which retains the concept of an aggregated metric of public health impact and hence allows for comparisons to be made across "cups of water," but avoids the need for development and use of complex models that are beyond the existing state of the science. Using the USEPA Six-Year Review data and available national occurrence surveys of drinking water contaminants, the metric is used to test risk reduction as it pertains to the implementation of the arsenic and uranium maximum contaminant levels and quantify "meaningful" risk reduction. Uranium represented the threshold risk reduction against which national non-compliance risk reduction was compared for arsenic, nitrate, and radium. Arsenic non-compliance is most significant and efforts focused on bringing those non-compliant utilities into compliance with the 10 μg/L maximum contaminant level would meet the threshold for meaningful risk reduction.

Urban transport safety assessment in akure based on corresponding performance indicators

NASA Astrophysics Data System (ADS)

Oye, Adedamola; Aderinlewo, Olufikayo; Croope, Silvana

2013-03-01

The level of safety of the transportation system in Akure, Nigeria was assessed by identifying the associated road safety problems and developing the corresponding safety performance indicators. These indicators were analysed with respect to accidents that occurred within the city from the year 2005 to 2009 based on the corresponding attributable risk measures. The results of the analysis showed the state of existing safety programs in Akure town. Six safety performance indicators were identified namely alcohol and drug use, excessive speeds, protection system (use of seat belts and helmets), use of day time running lights, state of vehicles (passive safety) and road condition. These indicators were used to determine the percentage of injury accidents as follows: 83.33% and 86.36% for years 2005 and 2006 respectively, 81.46% for year 2007 while years 2008 and 2009 had 82.86% and 78.12% injury accidents respectively.

Indicators and Metrics for Evaluating the Sustainability of Chemical Processes

EPA Science Inventory

A metric-based method, called GREENSCOPE, has been developed for evaluating process sustainability. Using lab-scale information and engineering assumptions the method evaluates full-scale epresentations of processes in environmental, efficiency, energy and economic areas. The m...

Indicators of School Crime and Safety, 1999.

ERIC Educational Resources Information Center

Kaufman, Phillip; Chen, Xianglei; Choy, Susan P.; Ruddy, Sally A.; Miller, Amanda K.; Chandler, Kathryn A.; Chapman, Christopher D.; Rand, Michael R.; Klaus, Patsy

This report provides detailed statistical information on crime in schools. It is a companion document to the "Annual Report on School Safety: 1999," which offers an overview of the nature and scope of school crime. This report is organized as a series of indicators, with each indicator presenting data on a different aspect of school crime and…

Leading and lagging indicators of occupational health and safety: The moderating role of safety leadership.

PubMed

Sheehan, Cathy; Donohue, Ross; Shea, Tracey; Cooper, Brian; Cieri, Helen De

2016-07-01

In response to the call for empirical evidence of a connection between leading and lagging indicators of occupational health and safety (OHS), the first aim of the current research is to consider the association between leading and lagging indicators of OHS. Our second aim is to investigate the moderating effect of safety leadership on the association between leading and lagging indicators. Data were collected from 3578 employees nested within 66 workplaces. Multi-level modelling was used to test the two hypotheses. The results confirm an association between leading and lagging indicators of OHS as well as the moderating impact of middle management safety leadership on the direct association. The association between leading and lagging indicators provides OHS practitioners with useful information to substantiate efforts within organisations to move away from a traditional focus on lagging indicators towards a preventative focus on leading indicators. The research also highlights the important role played by middle managers and the value of OHS leadership development and investment at the middle management level. Copyright © 2016 Elsevier Ltd. All rights reserved.

Foul tip impact attenuation of baseball catcher masks using head impact metrics

PubMed Central

White, Terrance R.; Cutcliffe, Hattie C.; Shridharani, Jay K.; Wood, Garrett W.; Bass, Cameron R.

2018-01-01

Currently, no scientific consensus exists on the relative safety of catcher mask styles and materials. Due to differences in mass and material properties, the style and material of a catcher mask influences the impact metrics observed during simulated foul ball impacts. The catcher surrogate was a Hybrid III head and neck equipped with a six degree of freedom sensor package to obtain linear accelerations and angular rates. Four mask styles were impacted using an air cannon for six 30 m/s and six 35 m/s impacts to the nasion. To quantify impact severity, the metrics peak linear acceleration, peak angular acceleration, Head Injury Criterion, Head Impact Power, and Gadd Severity Index were used. An Analysis of Covariance and a Tukey’s HSD Test were conducted to compare the least squares mean between masks for each head injury metric. For each injury metric a P-Value less than 0.05 was found indicating a significant difference in mask performance. Tukey’s HSD test found for each metric, the traditional style titanium mask fell in the lowest performance category while the hockey style mask was in the highest performance category. Limitations of this study prevented a direct correlation from mask testing performance to mild traumatic brain injury. PMID:29856814

Indicators of School Crime and Safety: 2012. NCES 2013-036/NCJ 241446

ERIC Educational Resources Information Center

Robers, Simone; Kemp, Jana; Truman, Jennifer

2013-01-01

Establishing reliable indicators of the current state of school crime and safety across the nation and regularly updating and monitoring these indicators is important in ensuring the safety of our nation's students. This is the aim of "Indicators of School Crime and Safety." This report is the fifteenth in a series of annual publications…

Quantifying the Metrics That Characterize Safety Culture of Three Engineered Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tucker, Julie; Ernesti, Mary; Tokuhiro, Akira

2002-07-01

With potential energy shortages and increasing electricity demand, the nuclear energy option is being reconsidered in the United States. Public opinion will have a considerable voice in policy decisions that will 'road-map' the future of nuclear energy in this country. This report is an extension of the last author's work on the 'safety culture' associated with three engineered systems (automobiles, commercial airplanes, and nuclear power plants) in Japan and the United States. Safety culture, in brief is defined as a specifically developed culture based on societal and individual interpretations of the balance of real, perceived, and imagined risks versus themore » benefits drawn from utilizing a given engineered systems. The method of analysis is a modified scale analysis, with two fundamental Eigen-metrics, time- (t) and number-scales (N) that describe both engineered systems and human factors. The scale analysis approach is appropriate because human perception of risk, perception of benefit and level of (technological) acceptance are inherently subjective, therefore 'fuzzy' and rarely quantifiable in exact magnitude. Perception of risk, expressed in terms of the psychometric factors 'dread risk' and 'unknown risk', contains both time- and number-scale elements. Various engineering system accidents with fatalities, reported by mass media are characterized by t and N, and are presented in this work using the scale analysis method. We contend that level of acceptance infers a perception of benefit at least two orders larger magnitude than perception of risk. The 'amplification' influence of mass media is also deduced as being 100- to 1000-fold the actual number of fatalities/serious injuries in a nuclear-related accident. (authors)« less

Efficacy of single and multi-metric fish-based indices in tracking anthropogenic pressures in estuaries: An 8-year case study.

PubMed

Martinho, Filipe; Nyitrai, Daniel; Crespo, Daniel; Pardal, Miguel A

2015-12-15

Facing a generalized increase in water degradation, several programmes have been implemented for protecting and enhancing the water quality and associated wildlife, which rely on ecological indicators to assess the degree of deviation from a pristine state. Here, single (species number, Shannon-Wiener H', Pielou J') and multi-metric (Estuarine Fish Assessment Index, EFAI) community-based ecological quality measures were evaluated in a temperate estuary over an 8-year period (2005-2012), and established their relationships with an anthropogenic pressure index (API). Single metric indices were highly variable and neither concordant amongst themselves nor with the EFAI. The EFAI was the only index significantly correlated with the API, indicating that higher ecological quality was associated with lower anthropogenic pressure. Pressure scenarios were related with specific fish community composition, as a result of distinct food web complexity and nursery functioning of the estuary. Results were discussed in the scope of the implementation of water protection programmes. Copyright © 2015 Elsevier Ltd. All rights reserved.

Indicators of School Crime and Safety: 2006. NCES 2007-003

ERIC Educational Resources Information Center

Dinkes, Rachel; Cataldi, Emily Forrest; Kena, Grace; Baum, Katrina

2006-01-01

This report provides the most recent national indicators on school crime and safety. Some of these indicators document that student safety has improved. For example, the victimization rate of students ages 12-18 at school declined from 73 victimizations per 1,000 students in 2003 to 55 per 1,000 students victimizations in 2004. However, other…

Deriving and Validating a Road Safety Performance Indicator for Vehicle Fleet Passive Safety

PubMed Central

Page, Marianne; Rackliff, Lucy

2006-01-01

Road safety performance indicators (RSPI) are policy tools which describe the extent of insecure operational safety conditions within traffic systems. This study describes the production of an RSPI which represents the presence within a country’s vehicle fleet, of vehicles that may not effectively protect an occupant in a collision. This work is highly original, as it uses the entire vehicle database of European Union Member States in order to estimate the average level of passive safety offered by the entire fleet in each country. The EuroNCAP safety ratings and vehicle age of each vehicle in each fleet have been obtained to calculate the RSPI. The methodology used could be adopted as an international standard. PMID:16968645

Identifying the most significant indicators of the total road safety performance index.

PubMed

Tešić, Milan; Hermans, Elke; Lipovac, Krsto; Pešić, Dalibor

2018-04-01

The review of the national and international literature dealing with the assessment of the road safety level has shown great efforts of the authors who tried to define the methodology for calculating the composite road safety index on a territory (region, state, etc.). The procedure for obtaining a road safety composite index of an area has been largely harmonized. The question that has not been fully resolved yet concerns the selection of indicators. There is a wide range of road safety indicators used to show a road safety situation on a territory. Road safety performance index (RSPI) obtained on the basis of a larger number of safety performance indicators (SPIs) enable decision makers to more precisely define the earlier goal- oriented actions. However, recording a broader comprehensive set of SPIs helps identify the strengths and weaknesses of a country's road safety system. Providing high quality national and international databases that would include comparable SPIs seems to be difficult since a larger number of countries dispose of a small number of identical indicators available for use. Therefore, there is a need for calculating a road safety performance index with a limited number of indicators (RSPI ln n ) which will provide a comparison of a sufficient quality, of as many countries as possible. The application of the Data Envelopment Analysis (DEA) method and correlative analysis has helped to check if the RSPI ln n is likely to be of sufficient quality. A strong correlation between the RSPI ln n and the RSPI has been identified using the proposed methodology. Based on this, the most contributing indicators and methodologies for gradual monitoring of SPIs, have been defined for each country analyzed. The indicator monitoring phases in the analyzed countries have been defined in the following way: Phase 1- the indicators relating to alcohol, speed and protective systems; Phase 2- the indicators relating to roads and Phase 3- the indicators relating to

Indicators and Methods for Evaluating Economic, Ecosystem ...

EPA Pesticide Factsheets

The U.S. Human Well-being Index (HWBI) is a composite measure that incorporates economic, environmental, and societal well-being elements through the eight domains of connection to nature, cultural fulfillment, education, health, leisure time, living standards, safety and security, and social cohesion (USEPA 2012a; Smith et al. 2013). Twenty-eight services, represented by a collection of indicators and metrics, have been identified as influencing these domains of human well-being. By taking an inventory of stocks or measuring the results of a service, a relationship function can be derived to understand how changes in the provisioning of that service can influence the HWBI. An extensive review of existing services was performed to identify current services, indicators and metrics in use. This report describes the indicators and methods we have selected to evaluate the provisioning of economic, ecosystem, and social services related to human well-being. Provide metadata and methods for calculating services provisioning scores for HWBI modeling framework

Global Surgery System Strengthening: It Is All About the Right Metrics.

PubMed

Watters, David A; Guest, Glenn D; Tangi, Viliami; Shrime, Mark G; Meara, John G

2018-04-01

Progress in achieving "universal access to safe, affordable surgery, and anesthesia care when needed" is dependent on consensus not only about the key messages but also on what metrics should be used to set goals and measure progress. The Lancet Commission on Global Surgery not only achieved consensus on key messages but also recommended 6 key metrics to inform national surgical plans and monitor scale-up toward 2030. These metrics measure access to surgery, as well as its timeliness, safety, and affordability: (1) Two-hour access to the 3 Bellwether procedures (cesarean delivery, emergency laparotomy, and management of an open fracture); (2) Surgeon, Anesthetist, and Obstetrician workforce >20/100,000; (3) Surgical volume of 5000 procedures/100,000; (4) Reporting of perioperative mortality rate; and (5 and 6) Risk rates of catastrophic expenditure and impoverishment when requiring surgery. This article discusses the definition, validity, feasibility, relevance, and progress with each of these metrics. The authors share their experience of introducing the metrics in the Pacific and sub-Saharan Africa. We identify appropriate messages for each potential stakeholder-the patients, practitioners, providers (health services and hospitals), public (community), politicians, policymakers, and payers. We discuss progress toward the metrics being included in core indicator lists by the World Health Organization and the World Bank and how they have been, or may be, used to inform National Surgical Plans in low- and middle-income countries to scale-up the delivery of safe, affordable, and timely surgical and anesthesia care to all who need it.

Standardised metrics for global surgical surveillance.

PubMed

Weiser, Thomas G; Makary, Martin A; Haynes, Alex B; Dziekan, Gerald; Berry, William R; Gawande, Atul A

2009-09-26

Public health surveillance relies on standardised metrics to evaluate disease burden and health system performance. Such metrics have not been developed for surgical services despite increasing volume, substantial cost, and high rates of death and disability associated with surgery. The Safe Surgery Saves Lives initiative of WHO's Patient Safety Programme has developed standardised public health metrics for surgical care that are applicable worldwide. We assembled an international panel of experts to develop and define metrics for measuring the magnitude and effect of surgical care in a population, while taking into account economic feasibility and practicability. This panel recommended six measures for assessing surgical services at a national level: number of operating rooms, number of operations, number of accredited surgeons, number of accredited anaesthesia professionals, day-of-surgery death ratio, and postoperative in-hospital death ratio. We assessed the feasibility of gathering such statistics at eight diverse hospitals in eight countries and incorporated them into the WHO Guidelines for Safe Surgery, in which methods for data collection, analysis, and reporting are outlined.

Performance Measures in Neurosurgical Patient Care: Differing Applications of Patient Safety Indicators.

PubMed

Moghavem, Nuriel; McDonald, Kathryn; Ratliff, John K; Hernandez-Boussard, Tina

2016-04-01

Patient Safety Indicators (PSIs) are administratively coded identifiers of potentially preventable adverse events. These indicators are used for multiple purposes, including benchmarking and quality improvement efforts. Baseline PSI evaluation in high-risk surgeries is fundamental to both purposes. Determine PSI rates and their impact on other outcomes in patients undergoing cranial neurosurgery compared with other surgeries. The Agency for Healthcare Research and Quality (AHRQ) PSI software was used to flag adverse events and determine risk-adjusted rates (RAR). Regression models were built to assess the association between PSIs and important patient outcomes. We identified cranial neurosurgeries based on International Classification of Diseases, Ninth Revision, Clinical Modification codes in California, Florida, New York, Arkansas, and Mississippi State Inpatient Databases, AHRQ, 2010-2011. PSI development, 30-day all-cause readmission, length of stay, hospital costs, and inpatient mortality. A total of 48,424 neurosurgical patients were identified. Procedure indication was strongly associated with PSI development. The neurosurgical population had significantly higher RAR of most PSIs evaluated compared with other surgical patients. Development of a PSI was strongly associated with increased length of stay and hospital cost and, in certain PSIs, increased inpatient mortality and 30-day readmission. In this population-based study, certain accountability measures proposed for use as value-based payment modifiers show higher RAR in neurosurgery patients compared with other surgical patients and were subsequently associated with poor outcomes. Our results indicate that for quality improvement efforts, the current AHRQ risk-adjustment models should be viewed in clinically meaningful stratified subgroups: for profiling and pay-for-performance applications, additional factors should be included in the risk-adjustment models. Further evaluation of PSIs in additional high

An Evaluation of Proposed School Safety Indicators for Georgia.

ERIC Educational Resources Information Center

Todd, Knox H.; Kellermann, Arthur L.; Wald, Marlena; Lipscomb, Leslie; Fajman, Nancy

One of the tasks of the Council for School Performance is to implement measures of school safety to determine the impact of Georgia Lottery for Education expenditures. During the 1994-95 school year, the council pilot-tested several indicators of school safety. This document presents the results of an evaluation that examined the relevance,…

New method for distance-based close following safety indicator.

PubMed

Sharizli, A A; Rahizar, R; Karim, M R; Saifizul, A A

2015-01-01

The increase in the number of fatalities caused by road accidents involving heavy vehicles every year has raised the level of concern and awareness on road safety in developing countries like Malaysia. Changes in the vehicle dynamic characteristics such as gross vehicle weight, travel speed, and vehicle classification will affect a heavy vehicle's braking performance and its ability to stop safely in emergency situations. As such, the aim of this study is to establish a more realistic new distance-based safety indicator called the minimum safe distance gap (MSDG), which incorporates vehicle classification (VC), speed, and gross vehicle weight (GVW). Commercial multibody dynamics simulation software was used to generate braking distance data for various heavy vehicle classes under various loads and speeds. By applying nonlinear regression analysis to the simulation results, a mathematical expression of MSDG has been established. The results show that MSDG is dynamically changed according to GVW, VC, and speed. It is envisaged that this new distance-based safety indicator would provide a more realistic depiction of the real traffic situation for safety analysis.

What About Metric? 1977 Edition.

ERIC Educational Resources Information Center

Barbrow, Louis E.

The conversion to the metric system of measurement and resulting advantages over the English system are discussed. Names of metric units are listed along with the multiplication factors indicated by their prefixes. A comparison of the major units of both systems using everyday quantities and sizes is made and a guide for estimating the most common…

Saccadic eye movement metrics reflect surgical residents' fatigue.

PubMed

Di Stasi, Leandro L; McCamy, Michael B; Macknik, Stephen L; Mankin, James A; Hooft, Nicole; Catena, Andrés; Martinez-Conde, Susana

2014-04-01

Little is known about the effects of surgical residents' fatigue on patient safety. We monitored surgical residents' fatigue levels during their call day using (1) eye movement metrics, (2) objective measures of laparoscopic surgical performance, and (3) subjective reports based on standardized questionnaires. Prior attempts to investigate the effects of fatigue on surgical performance have suffered from methodological limitations, including inconsistent definitions and lack of objective measures of fatigue, and nonstandardized measures of surgical performance. Recent research has shown that fatigue can affect the characteristics of saccadic (fast ballistic) eye movements in nonsurgical scenarios. Here we asked whether fatigue induced by time-on-duty (~24 hours) might affect saccadic metrics in surgical residents. Because saccadic velocity is not under voluntary control, a fatigue index based on saccadic velocity has the potential to provide an accurate and unbiased measure of the resident's fatigue level. We measured the eye movements of members of the general surgery resident team at St. Joseph's Hospital and Medical Center (Phoenix, AZ) (6 males and 6 females), using a head-mounted video eye tracker (similar configuration to a surgical headlight), during the performance of 3 tasks: 2 simulated laparoscopic surgery tasks (peg transfer and precision cutting) and a guided saccade task, before and after their call day. Residents rated their perceived fatigue level every 3 hours throughout their 24-hour shift, using a standardized scale. Time-on-duty decreased saccadic velocity and increased subjective fatigue but did not affect laparoscopic performance. These results support the hypothesis that saccadic indices reflect graded changes in fatigue. They also indicate that fatigue due to prolonged time-on-duty does not result necessarily in medical error, highlighting the complicated relationship among continuity of care, patient safety, and fatigued providers. Our data

A neural net-based approach to software metrics

NASA Technical Reports Server (NTRS)

Boetticher, G.; Srinivas, Kankanahalli; Eichmann, David A.

1992-01-01

Software metrics provide an effective method for characterizing software. Metrics have traditionally been composed through the definition of an equation. This approach is limited by the fact that all the interrelationships among all the parameters be fully understood. This paper explores an alternative, neural network approach to modeling metrics. Experiments performed on two widely accepted metrics, McCabe and Halstead, indicate that the approach is sound, thus serving as the groundwork for further exploration into the analysis and design of software metrics.

Safety models incorporating graph theory based transit indicators.

PubMed

Quintero, Liliana; Sayed, Tarek; Wahba, Mohamed M

2013-01-01

There is a considerable need for tools to enable the evaluation of the safety of transit networks at the planning stage. One interesting approach for the planning of public transportation systems is the study of networks. Network techniques involve the analysis of systems by viewing them as a graph composed of a set of vertices (nodes) and edges (links). Once the transport system is visualized as a graph, various network properties can be evaluated based on the relationships between the network elements. Several indicators can be calculated including connectivity, coverage, directness and complexity, among others. The main objective of this study is to investigate the relationship between network-based transit indicators and safety. The study develops macro-level collision prediction models that explicitly incorporate transit physical and operational elements and transit network indicators as explanatory variables. Several macro-level (zonal) collision prediction models were developed using a generalized linear regression technique, assuming a negative binomial error structure. The models were grouped into four main themes: transit infrastructure, transit network topology, transit route design, and transit performance and operations. The safety models showed that collisions were significantly associated with transit network properties such as: connectivity, coverage, overlapping degree and the Local Index of Transit Availability. As well, the models showed a significant relationship between collisions and some transit physical and operational attributes such as the number of routes, frequency of routes, bus density, length of bus and 3+ priority lanes. Copyright © 2012 Elsevier Ltd. All rights reserved.

Application of patient safety indicators internationally: a pilot study among seven countries.

PubMed

Drösler, Saskia E; Klazinga, Niek S; Romano, Patrick S; Tancredi, Daniel J; Gogorcena Aoiz, Maria A; Hewitt, Moira C; Scobie, Sarah; Soop, Michael; Wen, Eugene; Quan, Hude; Ghali, William A; Mattke, Soeren; Kelley, Edward

2009-08-01

To explore the potential for international comparison of patient safety as part of the Health Care Quality Indicators project of the Organization for Economic Co-operation and Development (OECD) by evaluating patient safety indicators originally published by the US Agency for Healthcare Research and Quality (AHRQ). A retrospective cross-sectional study. Acute care hospitals in the USA, UK, Sweden, Spain, Germany, Canada and Australia in 2004 and 2005/2006. Routine hospitalization-related administrative data from seven countries were analyzed. Using algorithms adapted to the diagnosis and procedure coding systems in place in each country, authorities in each of the participating countries reported summaries of the distribution of hospital-level and overall (national) rates for each AHRQ Patient Safety Indicator to the OECD project secretariat. Each country's vector of national indicator rates and the vector of American patient safety indicators rates published by AHRQ (and re-estimated as part of this study) were highly correlated (0.821-0.966). However, there was substantial systematic variation in rates across countries. This pilot study reveals that AHRQ Patient Safety Indicators can be applied to international hospital data. However, the analyses suggest that certain indicators (e.g. 'birth trauma', 'complications of anesthesia') may be too unreliable for international comparisons. Data quality varies across countries; undercoding may be a systematic problem in some countries. Efforts at international harmonization of hospital discharge data sets as well as improved accuracy of documentation should facilitate future comparative analyses of routine databases.

A newly developed dispersal metric indicates the succession of benthic invertebrates in restored rivers.

PubMed

Li, Fengqing; Sundermann, Andrea; Stoll, Stefan; Haase, Peter

2016-11-01

Dispersal capacity plays a fundamental role in the riverine benthic invertebrate colonization of new habitats that emerges following flash floods or restoration. However, an appropriate measure of dispersal capacity for benthic invertebrates is still lacking. The dispersal of benthic invertebrates occurs mainly during the aquatic (larval) and aerial (adult) life stages, and the dispersal of each stage can be further subdivided into active and passive modes. Based on these four possible dispersal modes, we first developed a metric (which is very similar to the well-known and widely used saprobic index) to estimate the dispersal capacity for 802 benthic invertebrate taxa by incorporating a weight for each mode. Second, we tested this metric using benthic invertebrate community data from a) 23 large restored river sites with substantial improvements of river bottom habitats dating back 1 to 10years, b) 23 unrestored sites very close to the restored sites, and c) 298 adjacent surrounding sites (mean±standard deviation: 13.0±9.5 per site) within a distance of up to 5km for each restored site in the low mountain and lowland areas of Germany. We hypothesize that our metric will reflect the temporal succession process of benthic invertebrate communities colonizing the restored sites, whereas no temporal changes are expected in the unrestored and surrounding sites. By applying our metric to these three river treatment categories, we found that the average dispersal capacity of benthic invertebrate communities in the restored sites significantly decreased in the early years following restoration, whereas there were no changes in either the unrestored or the surrounding sites. After all taxa had been divided into quartiles representing weak to strong dispersers, this pattern became even more obvious; strong dispersers colonized the restored sites during the first year after restoration and then significantly decreased over time, whereas weak dispersers continued to increase

From measurements to metrics: PCA-based indicators of cyber anomaly

NASA Astrophysics Data System (ADS)

Ahmed, Farid; Johnson, Tommy; Tsui, Sonia

2012-06-01

We present a framework of the application of Principal Component Analysis (PCA) to automatically obtain meaningful metrics from intrusion detection measurements. In particular, we report the progress made in applying PCA to analyze the behavioral measurements of malware and provide some preliminary results in selecting dominant attributes from an arbitrary number of malware attributes. The results will be useful in formulating an optimal detection threshold in the principal component space, which can both validate and augment existing malware classifiers.

Indicators of School Crime and Safety: 2013. NCES 2014-042/NCJ 243299

ERIC Educational Resources Information Center

Robers, Simone; Kemp, Jana; Rathbun, Amy; Morgan, Rachel E.

2014-01-01

"Indicators of School Crime and Safety: 2013" provides the most recent national indicators on school crime and safety. The information presented in this report is intended to serve as a reference for policymakers and practitioners so that they can develop effective programs and policies aimed at violence and school crime prevention.…

Indicators of School Crime and Safety: 2008. NCES 2009-022/NCJ 226343

ERIC Educational Resources Information Center

Dinkes, Rachel; Kemp, Jana; Baum, Katrina

2009-01-01

"Indicators of School Crime and Safety: 2008" provides the most recent national indicators on school crime and safety. The information presented in this report is intended to serve as a reference for policymakers and practitioners so that they can develop effective programs and policies aimed at violence and school crime prevention. The…

Selecting indicators for patient safety at the health system level in OECD countries.

PubMed

McLoughlin, Vivienne; Millar, John; Mattke, Soeren; Franca, Margarida; Jonsson, Pia Maria; Somekh, David; Bates, David

2006-09-01

Concerns about patient safety have arisen with growing documentation of the extent and nature of harm. Yet there are no robust and meaningful data that can be used internationally to assess the extent of the problem and considerable methodological difficulties. This article describes a project undertaken as part of the Organization for Economic Cooperation and Development (OECD) Quality Indicator Project, which aimed at developing an initial set of patient safety indicators. Patient safety indicators from OECD countries were identified and then rated against three principal criteria: importance to patient safety, scientific soundness, and potential feasibility. Although some countries are developing multi-source monitoring systems, these are not yet mature enough for international exchange. This project reviewed routine data collections as a starting point. Of an initial set of 59 candidate indicators identified, 21 were selected which cover known areas of harm to patients. This project is an important initial step towards defining a usable set of patient safety indicators that will allow comparisons to be made internationally and will support mutual learning and quality improvement in health care. Measures of harm should be complemented over time with measures of effective improvement factors.

Indicators of School Crime and Safety: 2005. NCES 2006-001

ERIC Educational Resources Information Center

DeVoe, Jill F.; Peter, Katharin; Noonan, Margaret; Snyder, Thomas D.; Baum, Katrina; Snyder, Thomas D.

2005-01-01

Indicators of School Crime and Safety: 2005 is the eighth in a series of annual reports produced by the National Center for Education Statistics (NCES) in the U.S. Department of Education and the Bureau of Justice Statistics (BJS) in the U.S. Department of Justice that present the most recent data available on school crime and student safety. The…

Key metrics for HFIR HEU and LEU models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ilas, Germina; Betzler, Benjamin R.; Chandler, David

This report compares key metrics for two fuel design models of the High Flux Isotope Reactor (HFIR). The first model represents the highly enriched uranium (HEU) fuel currently in use at HFIR, and the second model considers a low-enriched uranium (LEU) interim design fuel. Except for the fuel region, the two models are consistent, and both include an experiment loading that is representative of HFIR's current operation. The considered key metrics are the neutron flux at the cold source moderator vessel, the mass of 252Cf produced in the flux trap target region as function of cycle time, the fast neutronmore » flux at locations of interest for material irradiation experiments, and the reactor cycle length. These key metrics are a small subset of the overall HFIR performance and safety metrics. They were defined as a means of capturing data essential for HFIR's primary missions, for use in optimization studies assessing the impact of HFIR's conversion from HEU fuel to different types of LEU fuel designs.« less

Trajectory Planning by Preserving Flexibility: Metrics and Analysis

NASA Technical Reports Server (NTRS)

Idris, Husni R.; El-Wakil, Tarek; Wing, David J.

2008-01-01

In order to support traffic management functions, such as mitigating traffic complexity, ground and airborne systems may benefit from preserving or optimizing trajectory flexibility. To help support this hypothesis trajectory flexibility metrics have been defined in previous work to represent the trajectory robustness and adaptability to the risk of violating safety and traffic management constraints. In this paper these metrics are instantiated in the case of planning a trajectory with the heading degree of freedom. A metric estimation method is presented based on simplifying assumptions, namely discrete time and heading maneuvers. A case is analyzed to demonstrate the estimation method and its use in trajectory planning in a situation involving meeting a time constraint and avoiding loss of separation with nearby traffic. The case involves comparing path-stretch trajectories, in terms of adaptability and robustness along each, deduced from a map of estimated flexibility metrics over the solution space. The case demonstrated anecdotally that preserving flexibility may result in enhancing certain factors that contribute to traffic complexity, namely reducing proximity and confrontation.

Is Patient Safety Improving? National Trends in Patient Safety Indicators: 1998–2007

PubMed Central

Downey, John R; Hernandez-Boussard, Tina; Banka, Gaurav; Morton, John M

2012-01-01

Context Emphasis has been placed on quality and patient safety in medicine; however, little is known about whether quality over time has actually improved in areas such as patient safety indicators (PSIs). Objective To determine whether national trends for hospital PSIs have improved from 1998 to 2007. Design, Setting, and Participants Using PSI criteria from the Agency for Healthcare Research and Quality, PSIs were identified in the Nationwide Inpatient Sample (NIS) for all eligible inpatient admissions between 1998 and 2007. Joinpoint regression was used to estimate annual percentage changes (APCs) for PSIs. Main Outcome Measure Annual percent change for PSIs. Results From 1998 to 2007, 7.6 million PSI events occurred for over 69 million hospitalizations. A total of 14 PSIs showed statistically significant trends. Seven PSIs had increasing APC: postoperative pulmonary embolism or deep vein thrombosis (8.94), postoperative physiological or metabolic derangement (7.67), postoperative sepsis (7.17), selected infections due to medical care (4.05), decubitus ulcer (3.05), accidental puncture or laceration (2.64), and postoperative respiratory failure (1.46). Seven PSIs showed decreasing APCs: birth trauma injury to neonate (−17.79), failure to rescue (−6.05), postoperative hip fracture (−5.86), obstetric trauma–vaginal without instrument (−5.69), obstetric trauma–vaginal with instrument (−4.11), iatrogenic pneumothorax (−2.5), and postoperative wound dehiscence (−1.8). Conclusion This is the first study to establish national trends of PSIs during the past decade indicating areas for potential quality improvement prioritization. While many factors influence these trends, the results indicate opportunities for either emulation or elimination of current patient safety trends. PMID:22150789

Remote video auditing with real-time feedback in an academic surgical suite improves safety and efficiency metrics: a cluster randomised study.

PubMed

Overdyk, Frank J; Dowling, Oonagh; Newman, Sheldon; Glatt, David; Chester, Michelle; Armellino, Donna; Cole, Brandon; Landis, Gregg S; Schoenfeld, David; DiCapua, John F

2016-12-01

Compliance with the surgical safety checklist during operative procedures has been shown to reduce inhospital mortality and complications but proper execution by the surgical team remains elusive. We evaluated the impact of remote video auditing with real-time provider feedback on checklist compliance during sign-in, time-out and sign-out and case turnover times. Prospective, cluster randomised study in a 23-operating room (OR) suite. Surgeons, anaesthesia providers, nurses and support staff. ORs were randomised to receive, or not receive, real-time feedback on safety checklist compliance and efficiency metrics via display boards and text messages, followed by a period during which all ORs received feedback. Checklist compliance (Pass/Fail) during sign-in, time-out and sign-out demonstrated by (1) use of checklist, (2) team attentiveness, (3) required duration, (4) proper sequence and duration of case turnover times. Sign-in, time-out and sign-out PASS rates increased from 25%, 16% and 32% during baseline phase (n=1886) to 64%, 84% and 68% for feedback ORs versus 40%, 77% and 51% for no-feedback ORs (p<0.004) during the intervention phase (n=2693). Pass rates were 91%, 95% and 84% during the all-feedback phase (n=2001). For scheduled cases (n=1406, 71%), feedback reduced mean turnover times by 14% (41.4 min vs 48.1 min, p<0.004), and the improvement was sustained during the all-feedback period. Feedback had no effect on turnover time for unscheduled cases (n=587, 29%). Our data indicate that remote video auditing with feedback improves surgical safety checklist compliance for all cases, and turnover time for scheduled cases, but not for unscheduled cases. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Remote video auditing with real-time feedback in an academic surgical suite improves safety and efficiency metrics: a cluster randomised study

PubMed Central

Overdyk, Frank J; Dowling, Oonagh; Newman, Sheldon; Glatt, David; Chester, Michelle; Armellino, Donna; Cole, Brandon; Landis, Gregg S; Schoenfeld, David; DiCapua, John F

2016-01-01

Importance Compliance with the surgical safety checklist during operative procedures has been shown to reduce inhospital mortality and complications but proper execution by the surgical team remains elusive. Objective We evaluated the impact of remote video auditing with real-time provider feedback on checklist compliance during sign-in, time-out and sign-out and case turnover times. Design, setting Prospective, cluster randomised study in a 23-operating room (OR) suite. Participants Surgeons, anaesthesia providers, nurses and support staff. Exposure ORs were randomised to receive, or not receive, real-time feedback on safety checklist compliance and efficiency metrics via display boards and text messages, followed by a period during which all ORs received feedback. Main outcome(s) and measure(s) Checklist compliance (Pass/Fail) during sign-in, time-out and sign-out demonstrated by (1) use of checklist, (2) team attentiveness, (3) required duration, (4) proper sequence and duration of case turnover times. Results Sign-in, time-out and sign-out PASS rates increased from 25%, 16% and 32% during baseline phase (n=1886) to 64%, 84% and 68% for feedback ORs versus 40%, 77% and 51% for no-feedback ORs (p<0.004) during the intervention phase (n=2693). Pass rates were 91%, 95% and 84% during the all-feedback phase (n=2001). For scheduled cases (n=1406, 71%), feedback reduced mean turnover times by 14% (41.4 min vs 48.1 min, p<0.004), and the improvement was sustained during the all-feedback period. Feedback had no effect on turnover time for unscheduled cases (n=587, 29%). Conclusions and relevance Our data indicate that remote video auditing with feedback improves surgical safety checklist compliance for all cases, and turnover time for scheduled cases, but not for unscheduled cases. PMID:26658775

Develop metrics of tire debris on Texas highways : technical report.

DOT National Transportation Integrated Search

2017-05-01

This research effort estimated the amount, characteristics, costs, and safety implications of tire debris on Texas highways. The metrics developed by this research are based on several sources of data, including a statewide survey of debris removal p...

Algal bioassessment metrics for wadeable streams and rivers of Maine, USA

USGS Publications Warehouse

Danielson, Thomas J.; Loftin, Cynthia S.; Tsomides, Leonidas; DiFranco, Jeanne L.; Connors, Beth

2011-01-01

Many state water-quality agencies use biological assessment methods based on lotic fish and macroinvertebrate communities, but relatively few states have incorporated algal multimetric indices into monitoring programs. Algae are good indicators for monitoring water quality because they are sensitive to many environmental stressors. We evaluated benthic algal community attributes along a landuse gradient affecting wadeable streams and rivers in Maine, USA, to identify potential bioassessment metrics. We collected epilithic algal samples from 193 locations across the state. We computed weighted-average optima for common taxa for total P, total N, specific conductance, % impervious cover, and % developed watershed, which included all land use that is no longer forest or wetland. We assigned Maine stream tolerance values and categories (sensitive, intermediate, tolerant) to taxa based on their optima and responses to watershed disturbance. We evaluated performance of algal community metrics used in multimetric indices from other regions and novel metrics based on Maine data. Metrics specific to Maine data, such as the relative richness of species characterized as being sensitive in Maine, were more correlated with % developed watershed than most metrics used in other regions. Few community-structure attributes (e.g., species richness) were useful metrics in Maine. Performance of algal bioassessment models would be improved if metrics were evaluated with attributes of local data before inclusion in multimetric indices or statistical models. ?? 2011 by The North American Benthological Society.

Metrics for the NASA Airspace Systems Program

NASA Technical Reports Server (NTRS)

Smith, Jeremy C.; Neitzke, Kurt W.

2009-01-01

This document defines an initial set of metrics for use by the NASA Airspace Systems Program (ASP). ASP consists of the NextGen-Airspace Project and the NextGen-Airportal Project. The work in each project is organized along multiple, discipline-level Research Focus Areas (RFAs). Each RFA is developing future concept elements in support of the Next Generation Air Transportation System (NextGen), as defined by the Joint Planning and Development Office (JPDO). In addition, a single, system-level RFA is responsible for integrating concept elements across RFAs in both projects and for assessing system-wide benefits. The primary purpose of this document is to define a common set of metrics for measuring National Airspace System (NAS) performance before and after the introduction of ASP-developed concepts for NextGen as the system handles increasing traffic. The metrics are directly traceable to NextGen goals and objectives as defined by the JPDO and hence will be used to measure the progress of ASP research toward reaching those goals. The scope of this document is focused on defining a common set of metrics for measuring NAS capacity, efficiency, robustness, and safety at the system-level and at the RFA-level. Use of common metrics will focus ASP research toward achieving system-level performance goals and objectives and enable the discipline-level RFAs to evaluate the impact of their concepts at the system level.

A study of leading indicators for occupational health and safety management systems in healthcare.

PubMed

Almost, Joan M; VanDenKerkhof, Elizabeth G; Strahlendorf, Peter; Caicco Tett, Louise; Noonan, Joanna; Hayes, Thomas; Van Hulle, Henrietta; Adam, Ryan; Holden, Jeremy; Kent-Hillis, Tracy; McDonald, Mike; Paré, Geneviève C; Lachhar, Karanjit; Silva E Silva, Vanessa

2018-04-23

In Ontario, Canada, approximately $2.5 billion is spent yearly on occupational injuries in the healthcare sector. The healthcare sector has been ranked second highest for lost-time injury rates among 16 Ontario sectors since 2009 with female healthcare workers ranked the highest among all occupations for lost-time claims. There is a great deal of focus in Ontario's occupational health and safety system on compliance and fines, however despite this increased focus, the injury statistics are not significantly improving. One of the keys to changing this trend is the development of a culture of healthy and safe workplaces including the effective utilization of leading indicators within Occupational Health and Safety Management Systems (OHSMSs). In contrast to lagging indicators, which focus on outcomes retrospectively, a leading indicator is associated with proactive activities and consists of selected OHSMSs program elements. Using leading indicators to measure health and safety has been common practice in high-risk industries; however, this shift has not occurred in healthcare. The aim of this project is to conduct a longitudinal study implementing six elements of the Ontario Safety Association for Community and Healthcare (OSACH) system identified as leading indicators and evaluating the effectiveness of this intervention on improving selected health and safety workplace indicators. A quasi-experimental longitudinal research design will be used within two Ontario acute care hospitals. The first phase of the study will focus on assessing current OHSMSs using the leading indicators, determining potential facilitators and barriers to changing current OHSMSs, and identifying the leading indicators that could be added or changed to the existing OHSMS in place. Phase I will conclude with the development of an intervention designed to support optimizing current OHSMSs in participating hospitals based on identified gaps. Phase II will pilot test and evaluate the tailored

Empirical Evaluation of Hunk Metrics as Bug Predictors

NASA Astrophysics Data System (ADS)

Ferzund, Javed; Ahsan, Syed Nadeem; Wotawa, Franz

Reducing the number of bugs is a crucial issue during software development and maintenance. Software process and product metrics are good indicators of software complexity. These metrics have been used to build bug predictor models to help developers maintain the quality of software. In this paper we empirically evaluate the use of hunk metrics as predictor of bugs. We present a technique for bug prediction that works at smallest units of code change called hunks. We build bug prediction models using random forests, which is an efficient machine learning classifier. Hunk metrics are used to train the classifier and each hunk metric is evaluated for its bug prediction capabilities. Our classifier can classify individual hunks as buggy or bug-free with 86 % accuracy, 83 % buggy hunk precision and 77% buggy hunk recall. We find that history based and change level hunk metrics are better predictors of bugs than code level hunk metrics.

Integrated indicator to evaluate vehicle performance across: Safety, fuel efficiency and green domains.

PubMed

Torrao, G; Fontes, T; Coelho, M; Rouphail, N

2016-07-01

In general, car manufacturers face trade-offs between safety, efficiency and environmental performance when choosing between mass, length, engine power, and fuel efficiency. Moreover, the information available to the consumers makes difficult to assess all these components at once, especially when aiming to compare vehicles across different categories and/or to compare vehicles in the same category but across different model years. The main objective of this research was to develop an integrated tool able to assess vehicle's performance simultaneously for safety and environmental domains, leading to the research output of a Safety, Fuel Efficiency and Green Emissions (SEG) indicator able to evaluate and rank vehicle's performance across those three domains. For this purpose, crash data was gathered in Porto (Portugal) for the period 2006-2010 (N=1374). The crash database was analyzed and crash severity prediction models were developed using advanced logistic regression models. Following, the methodology for the SEG indicator was established combining the vehicle's safety and the environmental evaluation into an integrated analysis. The obtained results for the SEG indicator do not show any trade-off between vehicle's safety, fuel consumption and emissions. The best performance was achieved for newer gasoline passenger vehicles (<5year) with a smaller engine size (<1400cm(3)). According to the SEG indicator, a vehicle with these characteristics can be recommended for a safety-conscious profile user, as well as for a user more interested in fuel economy and/or in green performance. On the other hand, for larger engine size vehicles (>2000cm(3)) the combined score for safety user profile was in average more satisfactory than for vehicles in the smaller engine size group (<1400cm(3)), which suggests that in general, larger vehicles may offer extra protection. The achieved results demonstrate that the developed SEG integrated methodology can be a helpful tool for

The importance of metrics for evaluating scientific performance

NASA Astrophysics Data System (ADS)

Miyakawa, Tsuyoshi

Evaluation of scientific performance is a major factor that determines the behavior of both individual researchers and the academic institutes to which they belong. Because the number of researchers heavily outweighs the number of available research posts, and the competitive funding accounts for an ever-increasing proportion of research budget, some objective indicators of research performance have gained recognition for increasing transparency and openness. It is common practice to use metrics and indices to evaluate a researcher's performance or the quality of their grant applications. Such measures include the number of publications, the number of times these papers are cited and, more recently, the h-index, which measures the number of highly-cited papers the researcher has written. However, academic institutions and funding agencies in Japan have been rather slow to adopt such metrics. In this article, I will outline some of the currently available metrics, and discuss why we need to use such objective indicators of research performance more often in Japan. I will also discuss how to promote the use of metrics and what we should keep in mind when using them, as well as their potential impact on the research community in Japan.

Sharp metric obstructions for quasi-Einstein metrics

NASA Astrophysics Data System (ADS)

Case, Jeffrey S.

2013-02-01

Using the tractor calculus to study smooth metric measure spaces, we adapt results of Gover and Nurowski to give sharp metric obstructions to the existence of quasi-Einstein metrics on suitably generic manifolds. We do this by introducing an analogue of the Weyl tractor W to the setting of smooth metric measure spaces. The obstructions we obtain can be realized as tensorial invariants which are polynomial in the Riemann curvature tensor and its divergence. By taking suitable limits of their tensorial forms, we then find obstructions to the existence of static potentials, generalizing to higher dimensions a result of Bartnik and Tod, and to the existence of potentials for gradient Ricci solitons.

Landscape pattern metrics and regional assessment

USGS Publications Warehouse

O'Neill, R. V.; Riitters, K.H.; Wickham, J.D.; Jones, K.B.

1999-01-01

The combination of remote imagery data, geographic information systems software, and landscape ecology theory provides a unique basis for monitoring and assessing large-scale ecological systems. The unique feature of the work has been the need to develop and interpret quantitative measures of spatial pattern-the landscape indices. This article reviews what is known about the statistical properties of these pattern metrics and suggests some additional metrics based on island biogeography, percolation theory, hierarchy theory, and economic geography. Assessment applications of this approach have required interpreting the pattern metrics in terms of specific environmental endpoints, such as wildlife and water quality, and research into how to represent synergystic effects of many overlapping sources of stress.

Metric Madness

ERIC Educational Resources Information Center

Kroon, Cindy D.

2007-01-01

Created for a Metric Day activity, Metric Madness is a board game for two to four players. Students review and practice metric vocabulary, measurement, and calculations by playing the game. Playing time is approximately twenty to thirty minutes.

Make It Metric.

ERIC Educational Resources Information Center

Camilli, Thomas

Measurement is perhaps the most frequently used form of mathematics. This book presents activities for learning about the metric system designed for upper intermediate and junior high levels. Discussions include: why metrics, history of metrics, changing to a metric world, teaching tips, and formulas. Activities presented are: metrics all around…

Implicit Contractive Mappings in Modular Metric and Fuzzy Metric Spaces

PubMed Central

Hussain, N.; Salimi, P.

2014-01-01

The notion of modular metric spaces being a natural generalization of classical modulars over linear spaces like Lebesgue, Orlicz, Musielak-Orlicz, Lorentz, Orlicz-Lorentz, and Calderon-Lozanovskii spaces was recently introduced. In this paper we investigate the existence of fixed points of generalized α-admissible modular contractive mappings in modular metric spaces. As applications, we derive some new fixed point theorems in partially ordered modular metric spaces, Suzuki type fixed point theorems in modular metric spaces and new fixed point theorems for integral contractions. In last section, we develop an important relation between fuzzy metric and modular metric and deduce certain new fixed point results in triangular fuzzy metric spaces. Moreover, some examples are provided here to illustrate the usability of the obtained results. PMID:25003157

Vehicle Safety Communications project task 3 final report : identify intelligent vehicle safety applications enabled by DSRC

DOT National Transportation Integrated Search

2005-03-01

The Crash Avoidance Metrics Partnership (CAMP) Vehicle Safety Communications Consortium (VSCC) comprised of BMW, DaimlerChrysler, Ford, GM, Nissan, Toyota, and Volkswagen, in partnership with USDOT, established the Vehicle Safety Communications (VSC)...

Assessment of six dissimilarity metrics for climate analogues

NASA Astrophysics Data System (ADS)

Grenier, Patrick; Parent, Annie-Claude; Huard, David; Anctil, François; Chaumont, Diane

2013-04-01

Spatial analogue techniques consist in identifying locations whose recent-past climate is similar in some aspects to the future climate anticipated at a reference location. When identifying analogues, one key step is the quantification of the dissimilarity between two climates separated in time and space, which involves the choice of a metric. In this communication, spatial analogues and their usefulness are briefly discussed. Next, six metrics are presented (the standardized Euclidean distance, the Kolmogorov-Smirnov statistic, the nearest-neighbor distance, the Zech-Aslan energy statistic, the Friedman-Rafsky runs statistic and the Kullback-Leibler divergence), along with a set of criteria used for their assessment. The related case study involves the use of numerical simulations performed with the Canadian Regional Climate Model (CRCM-v4.2.3), from which three annual indicators (total precipitation, heating degree-days and cooling degree-days) are calculated over 30-year periods (1971-2000 and 2041-2070). Results indicate that the six metrics identify comparable analogue regions at a relatively large scale, but best analogues may differ substantially. For best analogues, it is also shown that the uncertainty stemming from the metric choice does generally not exceed that stemming from the simulation or model choice. A synthesis of the advantages and drawbacks of each metric is finally presented, in which the Zech-Aslan energy statistic stands out as the most recommended metric for analogue studies, whereas the Friedman-Rafsky runs statistic is the least recommended, based on this case study.

A chief safety officer as the driver and guardian of a great safety rating.

PubMed

Steck, Oliver; Zenker, Daniel; Beatty, Tom

2013-02-01

If the Pharmaceutical Industry were to align to broad metrics that objectively state each product's "Safety Rating" two things would happen. First, Life Sciences companies would refocus dramatically on safety (followed by outcomes). Second, companies that have the highest aggregate "Safety Rating" would enjoy a significant competitive advantage. To achieve and maintain a high safety rating, the role of Safety officer needs to be elevated to the C-Suite.

Structural texture similarity metrics for image analysis and retrieval.

PubMed

Zujovic, Jana; Pappas, Thrasyvoulos N; Neuhoff, David L

2013-07-01

We develop new metrics for texture similarity that accounts for human visual perception and the stochastic nature of textures. The metrics rely entirely on local image statistics and allow substantial point-by-point deviations between textures that according to human judgment are essentially identical. The proposed metrics extend the ideas of structural similarity and are guided by research in texture analysis-synthesis. They are implemented using a steerable filter decomposition and incorporate a concise set of subband statistics, computed globally or in sliding windows. We conduct systematic tests to investigate metric performance in the context of "known-item search," the retrieval of textures that are "identical" to the query texture. This eliminates the need for cumbersome subjective tests, thus enabling comparisons with human performance on a large database. Our experimental results indicate that the proposed metrics outperform peak signal-to-noise ratio (PSNR), structural similarity metric (SSIM) and its variations, as well as state-of-the-art texture classification metrics, using standard statistical measures.

Colonoscopy Quality: Metrics and Implementation

PubMed Central

Calderwood, Audrey H.; Jacobson, Brian C.

2013-01-01

Synopsis Colonoscopy is an excellent area for quality improvement 1 because it is high volume, has significant associated risk and expense, and there is evidence that variability in its performance affects outcomes. The best endpoint for validation of quality metrics in colonoscopy is colorectal cancer incidence and mortality, but because of feasibility issues, a more readily accessible metric is the adenoma detection rate (ADR). Fourteen quality metrics were proposed by the joint American Society of Gastrointestinal Endoscopy/American College of Gastroenterology Task Force on “Quality Indicators for Colonoscopy” in 2006, which are described in further detail below. Use of electronic health records and quality-oriented registries will facilitate quality measurement and reporting. Unlike traditional clinical research, implementation of quality improvement initiatives involves rapid assessments and changes on an iterative basis, and can be done at the individual, group, or facility level. PMID:23931862

Researcher and Author Impact Metrics: Variety, Value, and Context

PubMed Central

2018-01-01

Numerous quantitative indicators are currently available for evaluating research productivity. No single metric is suitable for comprehensive evaluation of the author-level impact. The choice of particular metrics depends on the purpose and context of the evaluation. The aim of this article is to overview some of the widely employed author impact metrics and highlight perspectives of their optimal use. The h-index is one of the most popular metrics for research evaluation, which is easy to calculate and understandable for non-experts. It is automatically displayed on researcher and author profiles on citation databases such as Scopus and Web of Science. Its main advantage relates to the combined approach to the quantification of publication and citation counts. This index is increasingly cited globally. Being an appropriate indicator of publication and citation activity of highly productive and successfully promoted authors, the h-index has been criticized primarily for disadvantaging early career researchers and authors with a few indexed publications. Numerous variants of the index have been proposed to overcome its limitations. Alternative metrics have also emerged to highlight ‘societal impact.’ However, each of these traditional and alternative metrics has its own drawbacks, necessitating careful analyses of the context of social attention and value of publication and citation sets. Perspectives of the optimal use of researcher and author metrics is dependent on evaluation purposes and compounded by information sourced from various global, national, and specialist bibliographic databases. PMID:29713258

Researcher and Author Impact Metrics: Variety, Value, and Context.

PubMed

Gasparyan, Armen Yuri; Yessirkepov, Marlen; Duisenova, Akmaral; Trukhachev, Vladimir I; Kostyukova, Elena I; Kitas, George D

2018-04-30

Numerous quantitative indicators are currently available for evaluating research productivity. No single metric is suitable for comprehensive evaluation of the author-level impact. The choice of particular metrics depends on the purpose and context of the evaluation. The aim of this article is to overview some of the widely employed author impact metrics and highlight perspectives of their optimal use. The h -index is one of the most popular metrics for research evaluation, which is easy to calculate and understandable for non-experts. It is automatically displayed on researcher and author profiles on citation databases such as Scopus and Web of Science. Its main advantage relates to the combined approach to the quantification of publication and citation counts. This index is increasingly cited globally. Being an appropriate indicator of publication and citation activity of highly productive and successfully promoted authors, the h -index has been criticized primarily for disadvantaging early career researchers and authors with a few indexed publications. Numerous variants of the index have been proposed to overcome its limitations. Alternative metrics have also emerged to highlight 'societal impact.' However, each of these traditional and alternative metrics has its own drawbacks, necessitating careful analyses of the context of social attention and value of publication and citation sets. Perspectives of the optimal use of researcher and author metrics is dependent on evaluation purposes and compounded by information sourced from various global, national, and specialist bibliographic databases.

Sediment transport-based metrics of wetland stability

USGS Publications Warehouse

Ganju, Neil K.; Kirwan, Matthew L.; Dickhudt, Patrick J.; Guntenspergen, Glenn R.; Cahoon, Donald R.; Kroeger, Kevin D.

2015-01-01

Despite the importance of sediment availability on wetland stability, vulnerability assessments seldom consider spatiotemporal variability of sediment transport. Models predict that the maximum rate of sea level rise a marsh can survive is proportional to suspended sediment concentration (SSC) and accretion. In contrast, we find that SSC and accretion are higher in an unstable marsh than in an adjacent stable marsh, suggesting that these metrics cannot describe wetland vulnerability. Therefore, we propose the flood/ebb SSC differential and organic-inorganic suspended sediment ratio as better vulnerability metrics. The unstable marsh favors sediment export (18 mg L−1 higher on ebb tides), while the stable marsh imports sediment (12 mg L−1 higher on flood tides). The organic-inorganic SSC ratio is 84% higher in the unstable marsh, and stable isotopes indicate a source consistent with marsh-derived material. These simple metrics scale with sediment fluxes, integrate spatiotemporal variability, and indicate sediment sources.

Computing and Using Metrics in the ADS

NASA Astrophysics Data System (ADS)

Henneken, E. A.; Accomazzi, A.; Kurtz, M. J.; Grant, C. S.; Thompson, D.; Luker, J.; Chyla, R.; Holachek, A.; Murray, S. S.

2015-04-01

Finding measures for research impact, be it for individuals, institutions, instruments, or projects, has gained a lot of popularity. There are more papers written than ever on new impact measures, and problems with existing measures are being pointed out on a regular basis. Funding agencies require impact statistics in their reports, job candidates incorporate them in their resumes, and publication metrics have even been used in at least one recent court case. To support this need for research impact indicators, the SAO/NASA Astrophysics Data System (ADS) has developed a service that provides a broad overview of various impact measures. In this paper we discuss how the ADS can be used to quench the thirst for impact measures. We will also discuss a couple of the lesser-known indicators in the metrics overview and the main issues to be aware of when compiling publication-based metrics in the ADS, namely author name ambiguity and citation incompleteness.

Developing a Metrics-Based Online Strategy for Libraries

ERIC Educational Resources Information Center

Pagano, Joe

2009-01-01

Purpose: The purpose of this paper is to provide an introduction to the various web metrics tools that are available, and to indicate how these might be used in libraries. Design/methodology/approach: The paper describes ways in which web metrics can be used to inform strategic decision making in libraries. Findings: A framework of possible web…

The Role of Geographical Indication in Supporting Food Safety: A not Taken for Granted Nexus

PubMed Central

2014-01-01

The paper focuses on the role of geographical indication in supporting strategies of food safety. Starting from the distinction between generic and specific quality, the article analyses the main factors influencing food safety in cases of geographical indication products, by stressing the importance of traceability systems and biodiversity in securing generic and specific quality. In the second part, the paper investigates the coordination problems behind a designation of origin and conditions to foster an effective collective action, a prerequisite to grant food safety through geographical indications. PMID:27800417

Coverage Metrics for Requirements-Based Testing: Evaluation of Effectiveness

NASA Technical Reports Server (NTRS)

Staats, Matt; Whalen, Michael W.; Heindahl, Mats P. E.; Rajan, Ajitha

2010-01-01

In black-box testing, the tester creates a set of tests to exercise a system under test without regard to the internal structure of the system. Generally, no objective metric is used to measure the adequacy of black-box tests. In recent work, we have proposed three requirements coverage metrics, allowing testers to objectively measure the adequacy of a black-box test suite with respect to a set of requirements formalized as Linear Temporal Logic (LTL) properties. In this report, we evaluate the effectiveness of these coverage metrics with respect to fault finding. Specifically, we conduct an empirical study to investigate two questions: (1) do test suites satisfying a requirements coverage metric provide better fault finding than randomly generated test suites of approximately the same size?, and (2) do test suites satisfying a more rigorous requirements coverage metric provide better fault finding than test suites satisfying a less rigorous requirements coverage metric? Our results indicate (1) only one coverage metric proposed -- Unique First Cause (UFC) coverage -- is sufficiently rigorous to ensure test suites satisfying the metric outperform randomly generated test suites of similar size and (2) that test suites satisfying more rigorous coverage metrics provide better fault finding than test suites satisfying less rigorous coverage metrics.

En route to Background Independence: Broken split-symmetry, and how to restore it with bi-metric average actions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Becker, D., E-mail: BeckerD@thep.physik.uni-mainz.ded; Reuter, M., E-mail: reuter@thep.physik.uni-mainz.de

2014-11-15

The most momentous requirement a quantum theory of gravity must satisfy is Background Independence, necessitating in particular an ab initio derivation of the arena all non-gravitational physics takes place in, namely spacetime. Using the background field technique, this requirement translates into the condition of an unbroken split-symmetry connecting the (quantized) metric fluctuations to the (classical) background metric. If the regularization scheme used violates split-symmetry during the quantization process it is mandatory to restore it in the end at the level of observable physics. In this paper we present a detailed investigation of split-symmetry breaking and restoration within the Effective Averagemore » Action (EAA) approach to Quantum Einstein Gravity (QEG) with a special emphasis on the Asymptotic Safety conjecture. In particular we demonstrate for the first time in a non-trivial setting that the two key requirements of Background Independence and Asymptotic Safety can be satisfied simultaneously. Carefully disentangling fluctuation and background fields, we employ a ‘bi-metric’ ansatz for the EAA and project the flow generated by its functional renormalization group equation on a truncated theory space spanned by two separate Einstein–Hilbert actions for the dynamical and the background metric, respectively. A new powerful method is used to derive the corresponding renormalization group (RG) equations for the Newton- and cosmological constant, both in the dynamical and the background sector. We classify and analyze their solutions in detail, determine their fixed point structure, and identify an attractor mechanism which turns out instrumental in the split-symmetry restoration. We show that there exists a subset of RG trajectories which are both asymptotically safe and split-symmetry restoring: In the ultraviolet they emanate from a non-Gaussian fixed point, and in the infrared they loose all symmetry violating contributions inflicted on them

Road safety performance indicators for the interurban road network.

PubMed

Yannis, George; Weijermars, Wendy; Gitelman, Victoria; Vis, Martijn; Chaziris, Antonis; Papadimitriou, Eleonora; Azevedo, Carlos Lima

2013-11-01

Various road safety performance indicators (SPIs) have been proposed for different road safety research areas, mainly as regards driver behaviour (e.g. seat belt use, alcohol, drugs, etc.) and vehicles (e.g. passive safety); however, no SPIs for the road network and design have been developed. The objective of this research is the development of an SPI for the road network, to be used as a benchmark for cross-region comparisons. The developed SPI essentially makes a comparison of the existing road network to the theoretically required one, defined as one which meets some minimum requirements with respect to road safety. This paper presents a theoretical concept for the determination of this SPI as well as a translation of this theory into a practical method. Also, the method is applied in a number of pilot countries namely the Netherlands, Portugal, Greece and Israel. The results show that the SPI could be efficiently calculated in all countries, despite some differences in the data sources. In general, the calculated overall SPI scores were realistic and ranged from 81 to 94%, with the exception of Greece where the SPI was relatively lower (67%). However, the SPI should be considered as a first attempt to determine the safety level of the road network. The proposed method has some limitations and could be further improved. The paper presents directions for further research to further develop the SPI. Copyright © 2012 Elsevier Ltd. All rights reserved.

Viewpoint matters: objective performance metrics for surgeon endoscope control during robot-assisted surgery.

PubMed

Jarc, Anthony M; Curet, Myriam J

2017-03-01

Effective visualization of the operative field is vital to surgical safety and education. However, additional metrics for visualization are needed to complement other common measures of surgeon proficiency, such as time or errors. Unlike other surgical modalities, robot-assisted minimally invasive surgery (RAMIS) enables data-driven feedback to trainees through measurement of camera adjustments. The purpose of this study was to validate and quantify the importance of novel camera metrics during RAMIS. New (n = 18), intermediate (n = 8), and experienced (n = 13) surgeons completed 25 virtual reality simulation exercises on the da Vinci Surgical System. Three camera metrics were computed for all exercises and compared to conventional efficiency measures. Both camera metrics and efficiency metrics showed construct validity (p < 0.05) across most exercises (camera movement frequency 23/25, camera movement duration 22/25, camera movement interval 19/25, overall score 24/25, completion time 25/25). Camera metrics differentiated new and experienced surgeons across all tasks as well as efficiency metrics. Finally, camera metrics significantly (p < 0.05) correlated with completion time (camera movement frequency 21/25, camera movement duration 21/25, camera movement interval 20/25) and overall score (camera movement frequency 20/25, camera movement duration 19/25, camera movement interval 20/25) for most exercises. We demonstrate construct validity of novel camera metrics and correlation between camera metrics and efficiency metrics across many simulation exercises. We believe camera metrics could be used to improve RAMIS proficiency-based curricula.

Use of two population metrics clarifies biodiversity dynamics in large-scale monitoring: the case of trees in Japanese old-growth forests: the need for multiple population metrics in large-scale monitoring.

PubMed

Ogawa, Mifuyu; Yamaura, Yuichi; Abe, Shin; Hoshino, Daisuke; Hoshizaki, Kazuhiko; Iida, Shigeo; Katsuki, Toshio; Masaki, Takashi; Niiyama, Kaoru; Saito, Satoshi; Sakai, Takeshi; Sugita, Hisashi; Tanouchi, Hiroyuki; Amano, Tatsuya; Taki, Hisatomo; Okabe, Kimiko

2011-07-01

Many indicators/indices provide information on whether the 2010 biodiversity target of reducing declines in biodiversity have been achieved. The strengths and limitations of the various measures used to assess the success of such measures are now being discussed. Biodiversity dynamics are often evaluated by a single biological population metric, such as the abundance of each species. Here we examined tree population dynamics of 52 families (192 species) at 11 research sites (three vegetation zones) of Japanese old-growth forests using two population metrics: number of stems and basal area. We calculated indices that track the rate of change in all species of tree by taking the geometric mean of changes in population metrics between the 1990s and the 2000s at the national level and at the levels of the vegetation zone and family. We specifically focused on whether indices based on these two metrics behaved similarly. The indices showed that (1) the number of stems declined, whereas basal area did not change at the national level and (2) the degree of change in the indices varied by vegetation zone and family. These results suggest that Japanese old-growth forests have not degraded and may even be developing in some vegetation zones, and indicate that the use of a single population metric (or indicator/index) may be insufficient to precisely understand the state of biodiversity. It is therefore important to incorporate more metrics into monitoring schemes to overcome the risk of misunderstanding or misrepresenting biodiversity dynamics.

NASA metric transition plan

NASA Technical Reports Server (NTRS)

1992-01-01

NASA science publications have used the metric system of measurement since 1970. Although NASA has maintained a metric use policy since 1979, practical constraints have restricted actual use of metric units. In 1988, an amendment to the Metric Conversion Act of 1975 required the Federal Government to adopt the metric system except where impractical. In response to Public Law 100-418 and Executive Order 12770, NASA revised its metric use policy and developed this Metric Transition Plan. NASA's goal is to use the metric system for program development and functional support activities to the greatest practical extent by the end of 1995. The introduction of the metric system into new flight programs will determine the pace of the metric transition. Transition of institutional capabilities and support functions will be phased to enable use of the metric system in flight program development and operations. Externally oriented elements of this plan will introduce and actively support use of the metric system in education, public information, and small business programs. The plan also establishes a procedure for evaluating and approving waivers and exceptions to the required use of the metric system for new programs. Coordination with other Federal agencies and departments (through the Interagency Council on Metric Policy) and industry (directly and through professional societies and interest groups) will identify sources of external support and minimize duplication of effort.

Software Quality Assurance Metrics

NASA Technical Reports Server (NTRS)

McRae, Kalindra A.

2004-01-01

Software Quality Assurance (SQA) is a planned and systematic set of activities that ensures conformance of software life cycle processes and products conform to requirements, standards and procedures. In software development, software quality means meeting requirements and a degree of excellence and refinement of a project or product. Software Quality is a set of attributes of a software product by which its quality is described and evaluated. The set of attributes includes functionality, reliability, usability, efficiency, maintainability, and portability. Software Metrics help us understand the technical process that is used to develop a product. The process is measured to improve it and the product is measured to increase quality throughout the life cycle of software. Software Metrics are measurements of the quality of software. Software is measured to indicate the quality of the product, to assess the productivity of the people who produce the product, to assess the benefits derived from new software engineering methods and tools, to form a baseline for estimation, and to help justify requests for new tools or additional training. Any part of the software development can be measured. If Software Metrics are implemented in software development, it can save time, money, and allow the organization to identify the caused of defects which have the greatest effect on software development. The summer of 2004, I worked with Cynthia Calhoun and Frank Robinson in the Software Assurance/Risk Management department. My task was to research and collect, compile, and analyze SQA Metrics that have been used in other projects that are not currently being used by the SA team and report them to the Software Assurance team to see if any metrics can be implemented in their software assurance life cycle process.

Effect of thematic map misclassification on landscape multi-metric assessment.

PubMed

Kleindl, William J; Powell, Scott L; Hauer, F Richard

2015-06-01

Advancements in remote sensing and computational tools have increased our awareness of large-scale environmental problems, thereby creating a need for monitoring, assessment, and management at these scales. Over the last decade, several watershed and regional multi-metric indices have been developed to assist decision-makers with planning actions of these scales. However, these tools use remote-sensing products that are subject to land-cover misclassification, and these errors are rarely incorporated in the assessment results. Here, we examined the sensitivity of a landscape-scale multi-metric index (MMI) to error from thematic land-cover misclassification and the implications of this uncertainty for resource management decisions. Through a case study, we used a simplified floodplain MMI assessment tool, whose metrics were derived from Landsat thematic maps, to initially provide results that were naive to thematic misclassification error. Using a Monte Carlo simulation model, we then incorporated map misclassification error into our MMI, resulting in four important conclusions: (1) each metric had a different sensitivity to error; (2) within each metric, the bias between the error-naive metric scores and simulated scores that incorporate potential error varied in magnitude and direction depending on the underlying land cover at each assessment site; (3) collectively, when the metrics were combined into a multi-metric index, the effects were attenuated; and (4) the index bias indicated that our naive assessment model may overestimate floodplain condition of sites with limited human impacts and, to a lesser extent, either over- or underestimated floodplain condition of sites with mixed land use.

An Underwater Color Image Quality Evaluation Metric.

PubMed

Yang, Miao; Sowmya, Arcot

2015-12-01

Quality evaluation of underwater images is a key goal of underwater video image retrieval and intelligent processing. To date, no metric has been proposed for underwater color image quality evaluation (UCIQE). The special absorption and scattering characteristics of the water medium do not allow direct application of natural color image quality metrics especially to different underwater environments. In this paper, subjective testing for underwater image quality has been organized. The statistical distribution of the underwater image pixels in the CIELab color space related to subjective evaluation indicates the sharpness and colorful factors correlate well with subjective image quality perception. Based on these, a new UCIQE metric, which is a linear combination of chroma, saturation, and contrast, is proposed to quantify the non-uniform color cast, blurring, and low-contrast that characterize underwater engineering and monitoring images. Experiments are conducted to illustrate the performance of the proposed UCIQE metric and its capability to measure the underwater image enhancement results. They show that the proposed metric has comparable performance to the leading natural color image quality metrics and the underwater grayscale image quality metrics available in the literature, and can predict with higher accuracy the relative amount of degradation with similar image content in underwater environments. Importantly, UCIQE is a simple and fast solution for real-time underwater video processing. The effectiveness of the presented measure is also demonstrated by subjective evaluation. The results show better correlation between the UCIQE and the subjective mean opinion score.

Important LiDAR metrics for discriminating forest tree species in Central Europe

NASA Astrophysics Data System (ADS)

Shi, Yifang; Wang, Tiejun; Skidmore, Andrew K.; Heurich, Marco

2018-03-01

Numerous airborne LiDAR-derived metrics have been proposed for classifying tree species. Yet an in-depth ecological and biological understanding of the significance of these metrics for tree species mapping remains largely unexplored. In this paper, we evaluated the performance of 37 frequently used LiDAR metrics derived under leaf-on and leaf-off conditions, respectively, for discriminating six different tree species in a natural forest in Germany. We firstly assessed the correlation between these metrics. Then we applied a Random Forest algorithm to classify the tree species and evaluated the importance of the LiDAR metrics. Finally, we identified the most important LiDAR metrics and tested their robustness and transferability. Our results indicated that about 60% of LiDAR metrics were highly correlated to each other (|r| > 0.7). There was no statistically significant difference in tree species mapping accuracy between the use of leaf-on and leaf-off LiDAR metrics. However, combining leaf-on and leaf-off LiDAR metrics significantly increased the overall accuracy from 58.2% (leaf-on) and 62.0% (leaf-off) to 66.5% as well as the kappa coefficient from 0.47 (leaf-on) and 0.51 (leaf-off) to 0.58. Radiometric features, especially intensity related metrics, provided more consistent and significant contributions than geometric features for tree species discrimination. Specifically, the mean intensity of first-or-single returns as well as the mean value of echo width were identified as the most robust LiDAR metrics for tree species discrimination. These results indicate that metrics derived from airborne LiDAR data, especially radiometric metrics, can aid in discriminating tree species in a mixed temperate forest, and represent candidate metrics for tree species classification and monitoring in Central Europe.

Supplementing land-use statistics with landscape metrics: some methodological considerations.

PubMed

Herzog, F; Lausch, A

2001-11-01

Landscape monitoring usually relies on land-use statistics which reflect the share of land-sue/land cover types. In order to understand the functioning of landscapes, landscape pattern must be considered as well. Indicators which address the spatial configuration of landscapes are therefore needed. The suitability of landscape metrics, which are computed from the type, geometry and arrangement of patches, is examined. Two case studies in a surface mining region show that landscape metrics capture landscape structure but are highly dependent on the data model and on the methods of data analysis. For landscape metrics to become part of policy-relevant sets of environmental indicators, standardised procedures for their computation from remote sensing images must be developed.

Safety Metrics for Human-Computer Controlled Systems

NASA Technical Reports Server (NTRS)

Leveson, Nancy G; Hatanaka, Iwao

2000-01-01

The rapid growth of computer technology and innovation has played a significant role in the rise of computer automation of human tasks in modem production systems across all industries. Although the rationale for automation has been to eliminate "human error" or to relieve humans from manual repetitive tasks, various computer-related hazards and accidents have emerged as a direct result of increased system complexity attributed to computer automation. The risk assessment techniques utilized for electromechanical systems are not suitable for today's software-intensive systems or complex human-computer controlled systems.This thesis will propose a new systemic model-based framework for analyzing risk in safety-critical systems where both computers and humans are controlling safety-critical functions. A new systems accident model will be developed based upon modem systems theory and human cognitive processes to better characterize system accidents, the role of human operators, and the influence of software in its direct control of significant system functions Better risk assessments will then be achievable through the application of this new framework to complex human-computer controlled systems.

It's A Metric World.

ERIC Educational Resources Information Center

Alabama State Dept. of Education, Montgomery. Div. of Instructional Services.

Topics covered in the first part of this document include eight advantages of the metric system; a summary of metric instruction; the International System of Units (SI) style and usage; metric decimal tables; the metric system; and conversion tables. An alphabetized list of organizations which market metric materials for educators is provided with…

Third annual report of the crash avoidance metrics partnership, April 2003 - March 2004

DOT National Transportation Integrated Search

2005-01-01

The Crash Avoidance Metrics Partnership (CAMP) was formed by Ford and General Motors in 1995 to accelerate the implementation of crash avoidance countermeasures in passenger vehicles to improve traffic safety. The CAMP Light Vehicle Enabling Research...

Metrics for linear kinematic features in sea ice

NASA Astrophysics Data System (ADS)

Levy, G.; Coon, M.; Sulsky, D.

2006-12-01

The treatment of leads as cracks or discontinuities (see Coon et al. presentation) requires some shift in the procedure of evaluation and comparison of lead-resolving models and their validation against observations. Common metrics used to evaluate ice model skills are by and large an adaptation of a least square "metric" adopted from operational numerical weather prediction data assimilation systems and are most appropriate for continuous fields and Eilerian systems where the observations and predictions are commensurate. However, this class of metrics suffers from some flaws in areas of sharp gradients and discontinuities (e.g., leads) and when Lagrangian treatments are more natural. After a brief review of these metrics and their performance in areas of sharp gradients, we present two new metrics specifically designed to measure model accuracy in representing linear features (e.g., leads). The indices developed circumvent the requirement that both the observations and model variables be commensurate (i.e., measured with the same units) by considering the frequencies of the features of interest/importance. We illustrate the metrics by scoring several hypothetical "simulated" discontinuity fields against the lead interpreted from RGPS observations.

Energy-Based Metrics for Arthroscopic Skills Assessment.

PubMed

Poursartip, Behnaz; LeBel, Marie-Eve; McCracken, Laura C; Escoto, Abelardo; Patel, Rajni V; Naish, Michael D; Trejos, Ana Luisa

2017-08-05

Minimally invasive skills assessment methods are essential in developing efficient surgical simulators and implementing consistent skills evaluation. Although numerous methods have been investigated in the literature, there is still a need to further improve the accuracy of surgical skills assessment. Energy expenditure can be an indication of motor skills proficiency. The goals of this study are to develop objective metrics based on energy expenditure, normalize these metrics, and investigate classifying trainees using these metrics. To this end, different forms of energy consisting of mechanical energy and work were considered and their values were divided by the related value of an ideal performance to develop normalized metrics. These metrics were used as inputs for various machine learning algorithms including support vector machines (SVM) and neural networks (NNs) for classification. The accuracy of the combination of the normalized energy-based metrics with these classifiers was evaluated through a leave-one-subject-out cross-validation. The proposed method was validated using 26 subjects at two experience levels (novices and experts) in three arthroscopic tasks. The results showed that there are statistically significant differences between novices and experts for almost all of the normalized energy-based metrics. The accuracy of classification using SVM and NN methods was between 70% and 95% for the various tasks. The results show that the normalized energy-based metrics and their combination with SVM and NN classifiers are capable of providing accurate classification of trainees. The assessment method proposed in this study can enhance surgical training by providing appropriate feedback to trainees about their level of expertise and can be used in the evaluation of proficiency.

Indicators of School Crime and Safety: 2010. NCES 2011-002/NCJ 230812

ERIC Educational Resources Information Center

Robers, Simone; Zhang, Jijun; Truman, Jennifer

2010-01-01

Ensuring safer schools requires establishing good indicators of the current state of school crime and safety across the nation and regularly updating and monitoring these indicators. This is the aim of this report. This report is the thirteenth in a series of annual publications produced jointly by the National Center for Education Statistics…

Metric Conversion

Atmospheric Science Data Center

2013-03-12

Metric Weights and Measures The metric system is based on 10s.  For example, 10 millimeters = 1 centimeter, 10 ... Special Publications: NIST Guide to SI Units: Conversion Factors NIST Guide to SI Units: Conversion Factors listed ...

Using Data Maturity Metrics to Help Insure Scientific Integrity

NASA Astrophysics Data System (ADS)

Bates, J. J.

2016-12-01

In the past few years, the full and open sharing of data and other artifacts of research in the geophysics have become mandatory. These include commitments from scientific societies, calls from international organizations, and in the United States, Executive Orders and legislation for open data. Unfortunately, these calls for open data have had, at best, mixed results. Audits by publishers indicate most who do not comply with are unaware of the policies or simply ignore them. A recent high profile publication on global warming resulted in repeated demands of `all data' from Congress and a prolonged back and forth on what `all data' meant. The emerging field of Data Management Maturity is making substantial progress on quantifying the elements needed to fully document, and making open and accessible, geophysical data sets. The proposed metrics have been culled from best practices for observational data sets and these metrics have been applied to a number of geophysical disciplines. A case study applying this metric to climate change indicators will be presented. It is recommended that U.S. Agencies and scientific societies formally adopt data maturity metrics to help ensure a consistent approach to ensure open data and scientific integrity.

Properties of C-metric spaces

NASA Astrophysics Data System (ADS)

Croitoru, Anca; Apreutesei, Gabriela; Mastorakis, Nikos E.

2017-09-01

The subject of this paper belongs to the theory of approximate metrics [23]. An approximate metric on X is a real application defined on X × X that satisfies only a part of the metric axioms. In a recent paper [23], we introduced a new type of approximate metric, named C-metric, that is an application which satisfies only two metric axioms: symmetry and triangular inequality. The remarkable fact in a C-metric space is that a topological structure induced by the C-metric can be defined. The innovative idea of this paper is that we obtain some convergence properties of a C-metric space in the absence of a metric. In this paper we investigate C-metric spaces. The paper is divided into four sections. Section 1 is for Introduction. In Section 2 we recall some concepts and preliminary results. In Section 3 we present some properties of C-metric spaces, such as convergence properties, a canonical decomposition and a C-fixed point theorem. Finally, in Section 4 some conclusions are highlighted.

En route to Background Independence: Broken split-symmetry, and how to restore it with bi-metric average actions

NASA Astrophysics Data System (ADS)

Becker, D.; Reuter, M.

2014-11-01

The most momentous requirement a quantum theory of gravity must satisfy is Background Independence, necessitating in particular an ab initio derivation of the arena all non-gravitational physics takes place in, namely spacetime. Using the background field technique, this requirement translates into the condition of an unbroken split-symmetry connecting the (quantized) metric fluctuations to the (classical) background metric. If the regularization scheme used violates split-symmetry during the quantization process it is mandatory to restore it in the end at the level of observable physics. In this paper we present a detailed investigation of split-symmetry breaking and restoration within the Effective Average Action (EAA) approach to Quantum Einstein Gravity (QEG) with a special emphasis on the Asymptotic Safety conjecture. In particular we demonstrate for the first time in a non-trivial setting that the two key requirements of Background Independence and Asymptotic Safety can be satisfied simultaneously. Carefully disentangling fluctuation and background fields, we employ a 'bi-metric' ansatz for the EAA and project the flow generated by its functional renormalization group equation on a truncated theory space spanned by two separate Einstein-Hilbert actions for the dynamical and the background metric, respectively. A new powerful method is used to derive the corresponding renormalization group (RG) equations for the Newton- and cosmological constant, both in the dynamical and the background sector. We classify and analyze their solutions in detail, determine their fixed point structure, and identify an attractor mechanism which turns out instrumental in the split-symmetry restoration. We show that there exists a subset of RG trajectories which are both asymptotically safe and split-symmetry restoring: In the ultraviolet they emanate from a non-Gaussian fixed point, and in the infrared they loose all symmetry violating contributions inflicted on them by the non

About Using the Metric System.

ERIC Educational Resources Information Center

Illinois State Office of Education, Springfield.

This booklet contains a brief introduction to the use of the metric system. Topics covered include: (1) what is the metric system; (2) how to think metric; (3) some advantages of the metric system; (4) basics of the metric system; (5) how to measure length, area, volume, mass and temperature the metric way; (6) some simple calculations using…

New risk metrics and mathematical tools for risk analysis: Current and future challenges

DOE Office of Scientific and Technical Information (OSTI.GOV)

Skandamis, Panagiotis N., E-mail: pskan@aua.gr; Andritsos, Nikolaos, E-mail: pskan@aua.gr; Psomas, Antonios, E-mail: pskan@aua.gr

The current status of the food safety supply world wide, has led Food and Agriculture Organization (FAO) and World Health Organization (WHO) to establishing Risk Analysis as the single framework for building food safety control programs. A series of guidelines and reports that detail out the various steps in Risk Analysis, namely Risk Management, Risk Assessment and Risk Communication is available. The Risk Analysis approach enables integration between operational food management systems, such as Hazard Analysis Critical Control Points, public health and governmental decisions. To do that, a series of new Risk Metrics has been established as follows: i) themore » Appropriate Level of Protection (ALOP), which indicates the maximum numbers of illnesses in a population per annum, defined by quantitative risk assessments, and used to establish; ii) Food Safety Objective (FSO), which sets the maximum frequency and/or concentration of a hazard in a food at the time of consumption that provides or contributes to the ALOP. Given that ALOP is rather a metric of the public health tolerable burden (it addresses the total ‘failure’ that may be handled at a national level), it is difficult to be interpreted into control measures applied at the manufacturing level. Thus, a series of specific objectives and criteria for performance of individual processes and products have been established, all of them assisting in the achievement of FSO and hence, ALOP. In order to achieve FSO, tools quantifying the effect of processes and intrinsic properties of foods on survival and growth of pathogens are essential. In this context, predictive microbiology and risk assessment have offered an important assistance to Food Safety Management. Predictive modelling is the basis of exposure assessment and the development of stochastic and kinetic models, which are also available in the form of Web-based applications, e.g., COMBASE and Microbial Responses Viewer), or introduced into user

New risk metrics and mathematical tools for risk analysis: Current and future challenges

NASA Astrophysics Data System (ADS)

Skandamis, Panagiotis N.; Andritsos, Nikolaos; Psomas, Antonios; Paramythiotis, Spyridon

2015-01-01

The current status of the food safety supply world wide, has led Food and Agriculture Organization (FAO) and World Health Organization (WHO) to establishing Risk Analysis as the single framework for building food safety control programs. A series of guidelines and reports that detail out the various steps in Risk Analysis, namely Risk Management, Risk Assessment and Risk Communication is available. The Risk Analysis approach enables integration between operational food management systems, such as Hazard Analysis Critical Control Points, public health and governmental decisions. To do that, a series of new Risk Metrics has been established as follows: i) the Appropriate Level of Protection (ALOP), which indicates the maximum numbers of illnesses in a population per annum, defined by quantitative risk assessments, and used to establish; ii) Food Safety Objective (FSO), which sets the maximum frequency and/or concentration of a hazard in a food at the time of consumption that provides or contributes to the ALOP. Given that ALOP is rather a metric of the public health tolerable burden (it addresses the total `failure' that may be handled at a national level), it is difficult to be interpreted into control measures applied at the manufacturing level. Thus, a series of specific objectives and criteria for performance of individual processes and products have been established, all of them assisting in the achievement of FSO and hence, ALOP. In order to achieve FSO, tools quantifying the effect of processes and intrinsic properties of foods on survival and growth of pathogens are essential. In this context, predictive microbiology and risk assessment have offered an important assistance to Food Safety Management. Predictive modelling is the basis of exposure assessment and the development of stochastic and kinetic models, which are also available in the form of Web-based applications, e.g., COMBASE and Microbial Responses Viewer), or introduced into user-friendly softwares

Safety update on the use of recombinant activated factor VII in approved indications.

PubMed

Neufeld, Ellis J; Négrier, Claude; Arkhammar, Per; Benchikh el Fegoun, Soraya; Simonsen, Mette Duelund; Rosholm, Anders; Seremetis, Stephanie

2015-06-01

This updated safety review summarises the large body of safety data available on the use of recombinant activated factor VII (rFVIIa) in approved indications: haemophilia with inhibitors, congenital factor VII (FVII) deficiency, acquired haemophilia and Glanzmann's thrombasthenia. Accumulated data up to 31 December 2013 from clinical trials as well as post-marketing data (registries, literature reports and spontaneous reports) were included. Overall, rFVIIa has shown a consistently favourable safety profile, with no unexpected safety concerns, in all approved indications. No confirmed cases of neutralising antibodies against rFVIIa have been reported in patients with congenital haemophilia, acquired haemophilia or Glanzmann's thrombasthenia. The favourable safety profile of rFVIIa can be attributed to the recombinant nature of rFVIIa and its localised mechanism of action at the site of vascular injury. Recombinant FVIIa activates factor X directly on the surface of activated platelets, which are present only at the site of injury, meaning that systemic activation of coagulation is avoided and the risk of thrombotic events (TEs) thus reduced. Nonetheless, close monitoring for signs and symptoms of TE is warranted in all patients treated with any pro-haemostatic agent, including rFVIIa, especially the elderly and any other patients with concomitant conditions and/or predisposing risk factors to thrombosis. Copyright © 2015 Elsevier Ltd. All rights reserved.

Landscape metrics for assessment of landscape destruction and rehabilitation.

PubMed

Herzog, F; Lausch, A; Müller, E; Thulke, H H; Steinhardt, U; Lehmann, S

2001-01-01

This investigation tested the usefulness of geometry-based landscape metrics for monitoring landscapes in a heavily disturbed environment. Research was carried out in a 75 sq km study area in Saxony, eastern Germany, where the landscape has been affected by surface mining and agricultural intensification. Landscape metrics were calculated from digital maps (1912, 1944, 1973, 1989) for the entire study area and for subregions (river valleys, plains), which were defined using the original geology and topography of the region. Correlation and factor analyses were used to select a set of landscape metrics suitable for landscape monitoring. Little land-use change occurred in the first half of the century, but political decisions and technological developments led to considerable change later. Metrics showed a similar pattern with almost no change between 1912 and 1944, but dramatic changes after 1944. Nonparametric statistical methods were used to test whether metrics differed between river valleys and plains. Significant differences in the metrics for these regions were found in the early maps (1912, 1944), but these differences were not significant in 1973 or 1989. These findings indicate that anthropogenic influences created a more home geneous landscape.

Models and metrics for software management and engineering

NASA Technical Reports Server (NTRS)

Basili, V. R.

1988-01-01

This paper attempts to characterize and present a state of the art view of several quantitative models and metrics of the software life cycle. These models and metrics can be used to aid in managing and engineering software projects. They deal with various aspects of the software process and product, including resources allocation and estimation, changes and errors, size, complexity and reliability. Some indication is given of the extent to which the various models have been used and the success they have achieved.

State of the art metrics for aspect oriented programming

NASA Astrophysics Data System (ADS)

Ghareb, Mazen Ismaeel; Allen, Gary

2018-04-01

The quality evaluation of software, e.g., defect measurement, gains significance with higher use of software applications. Metric measurements are considered as the primary indicator of imperfection prediction and software maintenance in various empirical studies of software products. However, there is no agreement on which metrics are compelling quality indicators for novel development approaches such as Aspect Oriented Programming (AOP). AOP intends to enhance programming quality, by providing new and novel constructs for the development of systems, for example, point cuts, advice and inter-type relationships. Hence, it is not evident if quality pointers for AOP can be derived from direct expansions of traditional OO measurements. Then again, investigations of AOP do regularly depend on established coupling measurements. Notwithstanding the late reception of AOP in empirical studies, coupling measurements have been adopted as useful markers of flaw inclination in this context. In this paper we will investigate the state of the art metrics for measurement of Aspect Oriented systems development.

The Metric System--An Overview.

ERIC Educational Resources Information Center

Hovey, Larry; Hovey, Kathi

1983-01-01

Sections look at: (1) Historical Perspective; (2) Naming the New System; (3) The Metric Units; (4) Measuring Larger and Smaller Amounts; (5) Advantage of Using the Metric System; (6) Metric Symbols; (7) Conversion from Metric to Customary System; (8) General Hints for Helping Children Understand; and (9) Current Status of Metric Conversion. (MP)

Observable traces of non-metricity: New constraints on metric-affine gravity

NASA Astrophysics Data System (ADS)

Delhom-Latorre, Adrià; Olmo, Gonzalo J.; Ronco, Michele

2018-05-01

Relaxing the Riemannian condition to incorporate geometric quantities such as torsion and non-metricity may allow to explore new physics associated with defects in a hypothetical space-time microstructure. Here we show that non-metricity produces observable effects in quantum fields in the form of 4-fermion contact interactions, thereby allowing us to constrain the scale of non-metricity to be greater than 1 TeV by using results on Bahbah scattering. Our analysis is carried out in the framework of a wide class of theories of gravity in the metric-affine approach. The bound obtained represents an improvement of several orders of magnitude to previous experimental constraints.

Relationship between Journal-Ranking Metrics for a Multidisciplinary Set of Journals

ERIC Educational Resources Information Center

Perera, Upeksha; Wijewickrema, Manjula

2018-01-01

Ranking of scholarly journals is important to many parties. Studying the relationships among various ranking metrics is key to understanding the significance of one metric based on another. This research investigates the relationship among four major journal-ranking indicators: the impact factor (IF), the Eigenfactor score (ES), the "h."…

Disturbance metrics predict a wetland Vegetation Index of Biotic Integrity

USGS Publications Warehouse

Stapanian, Martin A.; Mack, John; Adams, Jean V.; Gara, Brian; Micacchion, Mick

2013-01-01

Indices of biological integrity of wetlands based on vascular plants (VIBIs) have been developed in many areas in the USA. Knowledge of the best predictors of VIBIs would enable management agencies to make better decisions regarding mitigation site selection and performance monitoring criteria. We use a novel statistical technique to develop predictive models for an established index of wetland vegetation integrity (Ohio VIBI), using as independent variables 20 indices and metrics of habitat quality, wetland disturbance, and buffer area land use from 149 wetlands in Ohio, USA. For emergent and forest wetlands, predictive models explained 61% and 54% of the variability, respectively, in Ohio VIBI scores. In both cases the most important predictor of Ohio VIBI score was a metric that assessed habitat alteration and development in the wetland. Of secondary importance as a predictor was a metric that assessed microtopography, interspersion, and quality of vegetation communities in the wetland. Metrics and indices assessing disturbance and land use of the buffer area were generally poor predictors of Ohio VIBI scores. Our results suggest that vegetation integrity of emergent and forest wetlands could be most directly enhanced by minimizing substrate and habitat disturbance within the wetland. Such efforts could include reducing or eliminating any practices that disturb the soil profile, such as nutrient enrichment from adjacent farm land, mowing, grazing, or cutting or removing woody plants.

Surveillance metrics sensitivity study.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hamada, Michael S.; Bierbaum, Rene Lynn; Robertson, Alix A.

2011-09-01

In September of 2009, a Tri-Lab team was formed to develop a set of metrics relating to the NNSA nuclear weapon surveillance program. The purpose of the metrics was to develop a more quantitative and/or qualitative metric(s) describing the results of realized or non-realized surveillance activities on our confidence in reporting reliability and assessing the stockpile. As a part of this effort, a statistical sub-team investigated various techniques and developed a complementary set of statistical metrics that could serve as a foundation for characterizing aspects of meeting the surveillance program objectives. The metrics are a combination of tolerance limit calculationsmore » and power calculations, intending to answer level-of-confidence type questions with respect to the ability to detect certain undesirable behaviors (catastrophic defects, margin insufficiency defects, and deviations from a model). Note that the metrics are not intended to gauge product performance but instead the adequacy of surveillance. This report gives a short description of four metrics types that were explored and the results of a sensitivity study conducted to investigate their behavior for various inputs. The results of the sensitivity study can be used to set the risk parameters that specify the level of stockpile problem that the surveillance program should be addressing.« less

Surveillance Metrics Sensitivity Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bierbaum, R; Hamada, M; Robertson, A

2011-11-01

In September of 2009, a Tri-Lab team was formed to develop a set of metrics relating to the NNSA nuclear weapon surveillance program. The purpose of the metrics was to develop a more quantitative and/or qualitative metric(s) describing the results of realized or non-realized surveillance activities on our confidence in reporting reliability and assessing the stockpile. As a part of this effort, a statistical sub-team investigated various techniques and developed a complementary set of statistical metrics that could serve as a foundation for characterizing aspects of meeting the surveillance program objectives. The metrics are a combination of tolerance limit calculationsmore » and power calculations, intending to answer level-of-confidence type questions with respect to the ability to detect certain undesirable behaviors (catastrophic defects, margin insufficiency defects, and deviations from a model). Note that the metrics are not intended to gauge product performance but instead the adequacy of surveillance. This report gives a short description of four metrics types that were explored and the results of a sensitivity study conducted to investigate their behavior for various inputs. The results of the sensitivity study can be used to set the risk parameters that specify the level of stockpile problem that the surveillance program should be addressing.« less

U.S. Metric Conversion: Rough Road Ahead

ERIC Educational Resources Information Center

Guillen, Michael A.

1977-01-01

A survey of the United States' progress toward metrication indicates that, in spite of early industry and government conversion efforts, there exists significant disorientation, dissension, skepticism, and outright resistance among the influential sectors of government and private industry. (BT)

[Quality of care and safety indicators in anticoagulated patients with non-valvular auricular fibrillation and deep venous thromboembolic disease].

PubMed

Ignacio, E; Mira, J J; Campos, F J; López de Sá, E; Lorenzo, A; Caballero, F

To identify and prioritise indicators to assess the quality of care and safety of patients with non-valvular auricular fibrillation (NVAF) and deep vein thrombosis (DVT) treated with anticoagulants. Using the consensus conference technique, a group of professionals and clinical experts, the determining factors of the NVAF and DVT care process were identified, in order to define the quality and safety criteria. A proposal was made for indicators of quality and safety that were prioritised, taking into account a series of pre-established attributes. The selected indicators were classified into indicators of context, safety, action, and outcomes of the intervention in the patient. A set of 114 health care and safety quality indicators were identified, of which 35 were prioritised: 15 for NVAF and 20 for DVT. About half (49%) of the indicators (40% for NVAF and 55% for DVT) applied to patient safety, and 26% (33% for NVAF and 20% for DVT) to the outcomes of interventions in the patient. The present work presents a set of agreed indicators by a group of expert professionals that can contribute to the improvement of the quality of care of patients with NVAF and DVT treated with anticoagulants. Copyright © 2018 SECA. Publicado por Elsevier España, S.L.U. All rights reserved.

NASA metrication activities

NASA Technical Reports Server (NTRS)

Vlannes, P. N.

1978-01-01

NASA's organization and policy for metrification, history from 1964, NASA participation in Federal agency activities, interaction with nongovernmental metrication organizations, and the proposed metrication assessment study are reviewed.

Key Performance Indicators in the Evaluation of the Quality of Radiation Safety Programs.

PubMed

Schultz, Cheryl Culver; Shaffer, Sheila; Fink-Bennett, Darlene; Winokur, Kay

2016-08-01

Beaumont is a multiple hospital health care system with a centralized radiation safety department. The health system operates under a broad scope Nuclear Regulatory Commission license but also maintains several other limited use NRC licenses in off-site facilities and clinics. The hospital-based program is expansive including diagnostic radiology and nuclear medicine (molecular imaging), interventional radiology, a comprehensive cardiovascular program, multiple forms of radiation therapy (low dose rate brachytherapy, high dose rate brachytherapy, external beam radiotherapy, and gamma knife), and the Research Institute (including basic bench top, human and animal). Each year, in the annual report, data is analyzed and then tracked and trended. While any summary report will, by nature, include items such as the number of pieces of equipment, inspections performed, staff monitored and educated and other similar parameters, not all include an objective review of the quality and effectiveness of the program. Through objective numerical data Beaumont adopted seven key performance indicators. The assertion made is that key performance indicators can be used to establish benchmarks for evaluation and comparison of the effectiveness and quality of radiation safety programs. Based on over a decade of data collection, and adoption of key performance indicators, this paper demonstrates one way to establish objective benchmarking for radiation safety programs in the health care environment.

Measurement tools and process indicators of patient safety culture in primary care. A mixed methods study by the LINNEAUS collaboration on patient safety in primary care.

PubMed

Parker, Dianne; Wensing, Michel; Esmail, Aneez; Valderas, Jose M

2015-09-01

There is little guidance available to healthcare practitioners about what tools they might use to assess the patient safety culture. To identify useful tools for assessing patient safety culture in primary care organizations in Europe; to identify those aspects of performance that should be assessed when investigating the relationship between safety culture and performance in primary care. Two consensus-based studies were carried out, in which subject matter experts and primary healthcare professionals from several EU states rated (a) the applicability to their healthcare system of several existing safety culture assessment tools and (b) the appropriateness and usefulness of a range of potential indicators of a positive patient safety culture to primary care settings. The safety culture tools were field-tested in four countries to ascertain any challenges and issues arising when used in primary care. The two existing tools that received the most favourable ratings were the Manchester patient safety framework (MaPsAF primary care version) and the Agency for healthcare research and quality survey (medical office version). Several potential safety culture process indicators were identified. The one that emerged as offering the best combination of appropriateness and usefulness related to the collection of data on adverse patient events. Two tools, one quantitative and one qualitative, were identified as applicable and useful in assessing patient safety culture in primary care settings in Europe. Safety culture indicators in primary care should focus on the processes rather than the outcomes of care.

Mastering Metrics

ERIC Educational Resources Information Center

Parrot, Annette M.

2005-01-01

By the time students reach a middle school science course, they are expected to make measurements using the metric system. However, most are not practiced in its use, as their experience in metrics is often limited to one unit they were taught in elementary school. This lack of knowledge is not wholly the fault of formal education. Although the…

MJO simulation in CMIP5 climate models: MJO skill metrics and process-oriented diagnosis

NASA Astrophysics Data System (ADS)

Ahn, Min-Seop; Kim, Daehyun; Sperber, Kenneth R.; Kang, In-Sik; Maloney, Eric; Waliser, Duane; Hendon, Harry

2017-12-01

The Madden-Julian Oscillation (MJO) simulation diagnostics developed by MJO Working Group and the process-oriented MJO simulation diagnostics developed by MJO Task Force are applied to 37 Coupled Model Intercomparison Project phase 5 (CMIP5) models in order to assess model skill in representing amplitude, period, and coherent eastward propagation of the MJO, and to establish a link between MJO simulation skill and parameterized physical processes. Process-oriented diagnostics include the Relative Humidity Composite based on Precipitation (RHCP), Normalized Gross Moist Stability (NGMS), and the Greenhouse Enhancement Factor (GEF). Numerous scalar metrics are developed to quantify the results. Most CMIP5 models underestimate MJO amplitude, especially when outgoing longwave radiation (OLR) is used in the evaluation, and exhibit too fast phase speed while lacking coherence between eastward propagation of precipitation/convection and the wind field. The RHCP-metric, indicative of the sensitivity of simulated convection to low-level environmental moisture, and the NGMS-metric, indicative of the efficiency of a convective atmosphere for exporting moist static energy out of the column, show robust correlations with a large number of MJO skill metrics. The GEF-metric, indicative of the strength of the column-integrated longwave radiative heating due to cloud-radiation interaction, is also correlated with the MJO skill metrics, but shows relatively lower correlations compared to the RHCP- and NGMS-metrics. Our results suggest that modifications to processes associated with moisture-convection coupling and the gross moist stability might be the most fruitful for improving simulations of the MJO. Though the GEF-metric exhibits lower correlations with the MJO skill metrics, the longwave radiation feedback is highly relevant for simulating the weak precipitation anomaly regime that may be important for the establishment of shallow convection and the transition to deep convection.

MJO simulation in CMIP5 climate models: MJO skill metrics and process-oriented diagnosis

DOE PAGES

Ahn, Min-Seop; Kim, Daehyun; Sperber, Kenneth R.; ...

2017-03-23

The Madden-Julian Oscillation (MJO) simulation diagnostics developed by MJO Working Group and the process-oriented MJO simulation diagnostics developed by MJO Task Force are applied to 37 Coupled Model Intercomparison Project phase 5 (CMIP5) models in order to assess model skill in representing amplitude, period, and coherent eastward propagation of the MJO, and to establish a link between MJO simulation skill and parameterized physical processes. Process-oriented diagnostics include the Relative Humidity Composite based on Precipitation (RHCP), Normalized Gross Moist Stability (NGMS), and the Greenhouse Enhancement Factor (GEF). Numerous scalar metrics are developed to quantify the results. Most CMIP5 models underestimate MJOmore » amplitude, especially when outgoing longwave radiation (OLR) is used in the evaluation, and exhibit too fast phase speed while lacking coherence between eastward propagation of precipitation/convection and the wind field. The RHCP-metric, indicative of the sensitivity of simulated convection to low-level environmental moisture, and the NGMS-metric, indicative of the efficiency of a convective atmosphere for exporting moist static energy out of the column, show robust correlations with a large number of MJO skill metrics. The GEF-metric, indicative of the strength of the column-integrated longwave radiative heating due to cloud-radiation interaction, is also correlated with the MJO skill metrics, but shows relatively lower correlations compared to the RHCP- and NGMS-metrics. Our results suggest that modifications to processes associated with moisture-convection coupling and the gross moist stability might be the most fruitful for improving simulations of the MJO. Though the GEF-metric exhibits lower correlations with the MJO skill metrics, the longwave radiation feedback is highly relevant for simulating the weak precipitation anomaly regime that may be important for the establishment of shallow convection and the transition to deep

MJO simulation in CMIP5 climate models: MJO skill metrics and process-oriented diagnosis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ahn, Min-Seop; Kim, Daehyun; Sperber, Kenneth R.

The Madden-Julian Oscillation (MJO) simulation diagnostics developed by MJO Working Group and the process-oriented MJO simulation diagnostics developed by MJO Task Force are applied to 37 Coupled Model Intercomparison Project phase 5 (CMIP5) models in order to assess model skill in representing amplitude, period, and coherent eastward propagation of the MJO, and to establish a link between MJO simulation skill and parameterized physical processes. Process-oriented diagnostics include the Relative Humidity Composite based on Precipitation (RHCP), Normalized Gross Moist Stability (NGMS), and the Greenhouse Enhancement Factor (GEF). Numerous scalar metrics are developed to quantify the results. Most CMIP5 models underestimate MJOmore » amplitude, especially when outgoing longwave radiation (OLR) is used in the evaluation, and exhibit too fast phase speed while lacking coherence between eastward propagation of precipitation/convection and the wind field. The RHCP-metric, indicative of the sensitivity of simulated convection to low-level environmental moisture, and the NGMS-metric, indicative of the efficiency of a convective atmosphere for exporting moist static energy out of the column, show robust correlations with a large number of MJO skill metrics. The GEF-metric, indicative of the strength of the column-integrated longwave radiative heating due to cloud-radiation interaction, is also correlated with the MJO skill metrics, but shows relatively lower correlations compared to the RHCP- and NGMS-metrics. Our results suggest that modifications to processes associated with moisture-convection coupling and the gross moist stability might be the most fruitful for improving simulations of the MJO. Though the GEF-metric exhibits lower correlations with the MJO skill metrics, the longwave radiation feedback is highly relevant for simulating the weak precipitation anomaly regime that may be important for the establishment of shallow convection and the transition to deep

A comparative study of multi-focus image fusion validation metrics

NASA Astrophysics Data System (ADS)

Giansiracusa, Michael; Lutz, Adam; Messer, Neal; Ezekiel, Soundararajan; Alford, Mark; Blasch, Erik; Bubalo, Adnan; Manno, Michael

2016-05-01

Fusion of visual information from multiple sources is relevant for applications security, transportation, and safety applications. One way that image fusion can be particularly useful is when fusing imagery data from multiple levels of focus. Different focus levels can create different visual qualities for different regions in the imagery, which can provide much more visual information to analysts when fused. Multi-focus image fusion would benefit a user through automation, which requires the evaluation of the fused images to determine whether they have properly fused the focused regions of each image. Many no-reference metrics, such as information theory based, image feature based and structural similarity-based have been developed to accomplish comparisons. However, it is hard to scale an accurate assessment of visual quality which requires the validation of these metrics for different types of applications. In order to do this, human perception based validation methods have been developed, particularly dealing with the use of receiver operating characteristics (ROC) curves and the area under them (AUC). Our study uses these to analyze the effectiveness of no-reference image fusion metrics applied to multi-resolution fusion methods in order to determine which should be used when dealing with multi-focus data. Preliminary results show that the Tsallis, SF, and spatial frequency metrics are consistent with the image quality and peak signal to noise ratio (PSNR).

Fault Management Metrics

NASA Technical Reports Server (NTRS)

Johnson, Stephen B.; Ghoshal, Sudipto; Haste, Deepak; Moore, Craig

2017-01-01

This paper describes the theory and considerations in the application of metrics to measure the effectiveness of fault management. Fault management refers here to the operational aspect of system health management, and as such is considered as a meta-control loop that operates to preserve or maximize the system's ability to achieve its goals in the face of current or prospective failure. As a suite of control loops, the metrics to estimate and measure the effectiveness of fault management are similar to those of classical control loops in being divided into two major classes: state estimation, and state control. State estimation metrics can be classified into lower-level subdivisions for detection coverage, detection effectiveness, fault isolation and fault identification (diagnostics), and failure prognosis. State control metrics can be classified into response determination effectiveness and response effectiveness. These metrics are applied to each and every fault management control loop in the system, for each failure to which they apply, and probabilistically summed to determine the effectiveness of these fault management control loops to preserve the relevant system goals that they are intended to protect.

Canadian Association of Gastroenterology consensus guidelines on safety and quality indicators in endoscopy

PubMed Central

Armstrong, David; Barkun, Alan; Bridges, Ron; Carter, Rose; de Gara, Chris; Dubé, Catherine; Enns, Robert; Hollingworth, Roger; MacIntosh, Donald; Borgaonkar, Mark; Forget, Sylviane; Leontiadis, Grigorios; Meddings, Jonathan; Cotton, Peter; Kuipers, Ernst J; Valori, Roland

2012-01-01

BACKGROUND: Increasing use of gastrointestinal endoscopy, particularly for colorectal cancer screening, and increasing emphasis on health care quality, highlight the need for clearly defined, evidence-based processes to support quality improvement in endoscopy. OBJECTIVE: To identify processes and indicators of quality and safety relevant to high-quality endoscopy service delivery. METHODS: A multidisciplinary group of 35 voting participants developed recommendation statements and performance indicators. Systematic literature searches generated 50 initial statements that were revised iteratively following a modified Delphi approach using a web-based evaluation and voting tool. Statement development and evidence evaluation followed the AGREE (Appraisal of Guidelines, REsearch and Evaluation) and GRADE (Grading of Recommendations, Assessment, Development and Evaluation) guidelines. At the consensus conference, participants voted anonymously on all statements using a 6-point scale. Subsequent web-based voting evaluated recommendations for specific, individual quality indicators, safety indicators and mandatory endoscopy reporting fields. Consensus was defined a priori as agreement by 80% of participants. RESULTS: Consensus was reached on 23 recommendation statements addressing the following: ethics (statement 1: agreement 100%), facility standards and policies (statements 2 to 9: 90% to 100%), quality assurance (statements 10 to 13: 94% to 100%), training, education, competency and privileges (statements 14 to 19: 97% to 100%), endoscopy reporting standards (statements 20 and 21: 97% to 100%) and patient perceptions (statements 22 and 23: 100%). Additionally, 18 quality indicators (agreement 83% to 100%), 20 safety indicators (agreement 77% to 100%) and 23 recommended endoscopy-reporting elements (agreement 91% to 100%) were identified. DISCUSSION: The consensus process identified a clear need for high-quality clinical and outcomes research to support quality

Double metric, generalized metric, and α' -deformed double field theory

NASA Astrophysics Data System (ADS)

Hohm, Olaf; Zwiebach, Barton

2016-03-01

We relate the unconstrained "double metric" of the "α' -geometry" formulation of double field theory to the constrained generalized metric encoding the spacetime metric and b -field. This is achieved by integrating out auxiliary field components of the double metric in an iterative procedure that induces an infinite number of higher-derivative corrections. As an application, we prove that, to first order in α' and to all orders in fields, the deformed gauge transformations are Green-Schwarz-deformed diffeomorphisms. We also prove that to first order in α' the spacetime action encodes precisely the Green-Schwarz deformation with Chern-Simons forms based on the torsionless gravitational connection. This seems to be in tension with suggestions in the literature that T-duality requires a torsionful connection, but we explain that these assertions are ambiguous since actions that use different connections are related by field redefinitions.

Sigma Metrics Across the Total Testing Process.

PubMed

Charuruks, Navapun

2017-03-01

Laboratory quality control has been developed for several decades to ensure patients' safety, from a statistical quality control focus on the analytical phase to total laboratory processes. The sigma concept provides a convenient way to quantify the number of errors in extra-analytical and analytical phases through the defect per million and sigma metric equation. Participation in a sigma verification program can be a convenient way to monitor analytical performance continuous quality improvement. Improvement of sigma-scale performance has been shown from our data. New tools and techniques for integration are needed. Copyright © 2016 Elsevier Inc. All rights reserved.

Measurement tools and process indicators of patient safety culture in primary care. A mixed methods study by the LINNEAUS collaboration on patient safety in primary care

PubMed Central

Parker, Dianne; Wensing, Michel; Esmail, Aneez; Valderas, Jose M

2015-01-01

ABSTRACT Background: There is little guidance available to healthcare practitioners about what tools they might use to assess the patient safety culture. Objective: To identify useful tools for assessing patient safety culture in primary care organizations in Europe; to identify those aspects of performance that should be assessed when investigating the relationship between safety culture and performance in primary care. Methods: Two consensus-based studies were carried out, in which subject matter experts and primary healthcare professionals from several EU states rated (a) the applicability to their healthcare system of several existing safety culture assessment tools and (b) the appropriateness and usefulness of a range of potential indicators of a positive patient safety culture to primary care settings. The safety culture tools were field-tested in four countries to ascertain any challenges and issues arising when used in primary care. Results: The two existing tools that received the most favourable ratings were the Manchester patient safety framework (MaPsAF primary care version) and the Agency for healthcare research and quality survey (medical office version). Several potential safety culture process indicators were identified. The one that emerged as offering the best combination of appropriateness and usefulness related to the collection of data on adverse patient events. Conclusion: Two tools, one quantitative and one qualitative, were identified as applicable and useful in assessing patient safety culture in primary care settings in Europe. Safety culture indicators in primary care should focus on the processes rather than the outcomes of care. PMID:26339832

Safety considerations in providing allergen immunotherapy in the office.

PubMed

Mattos, Jose L; Lee, Stella

2016-06-01

This review highlights the risks of allergy immunotherapy, methods to improve the quality and safety of allergy treatment, the current status of allergy quality metrics, and the future of quality measurement. In the current healthcare environment, the emphasis on outcomes measurement is increasing, and providers must be better equipped in the development, measurement, and reporting of safety and quality measures. Immunotherapy offers the only potential cure for allergic disease and asthma. Although well tolerated and effective, immunotherapy can be associated with serious consequence, including anaphylaxis and death. Many predisposing factors and errors that lead to serious systemic reactions are preventable, and the evaluation and implementation of quality measures are crucial to developing a safe immunotherapy practice. Although quality metrics for immunotherapy are in their infancy, they will become increasingly sophisticated, and providers will face increased pressure to deliver safe, high-quality, patient-centered, evidence-based, and efficient allergy care. The establishment of safety in the allergy office involves recognition of potential risk factors for anaphylaxis, the development and measurement of quality metrics, and changing systems-wide practices if needed. Quality improvement is a continuous process, and although national allergy-specific quality metrics do not yet exist, they are in development.

Metrication study for large space telescope

NASA Technical Reports Server (NTRS)

Creswick, F. A.; Weller, A. E.

1973-01-01

Various approaches which could be taken in developing a metric-system design for the Large Space Telescope, considering potential penalties on development cost and time, commonality with other satellite programs, and contribution to national goals for conversion to the metric system of units were investigated. Information on the problems, potential approaches, and impacts of metrication was collected from published reports on previous aerospace-industry metrication-impact studies and through numerous telephone interviews. The recommended approach to LST metrication formulated in this study cells for new components and subsystems to be designed in metric-module dimensions, but U.S. customary practice is allowed where U.S. metric standards and metric components are not available or would be unsuitable. Electrical/electronic-system design, which is presently largely metric, is considered exempt from futher metrication. An important guideline is that metric design and fabrication should in no way compromise the effectiveness of the LST equipment.

A guide to phylogenetic metrics for conservation, community ecology and macroecology

PubMed Central

Cadotte, Marc W.; Carvalho, Silvia B.; Davies, T. Jonathan; Ferrier, Simon; Fritz, Susanne A.; Grenyer, Rich; Helmus, Matthew R.; Jin, Lanna S.; Mooers, Arne O.; Pavoine, Sandrine; Purschke, Oliver; Redding, David W.; Rosauer, Dan F.; Winter, Marten; Mazel, Florent

2016-01-01

ABSTRACT The use of phylogenies in ecology is increasingly common and has broadened our understanding of biological diversity. Ecological sub‐disciplines, particularly conservation, community ecology and macroecology, all recognize the value of evolutionary relationships but the resulting development of phylogenetic approaches has led to a proliferation of phylogenetic diversity metrics. The use of many metrics across the sub‐disciplines hampers potential meta‐analyses, syntheses, and generalizations of existing results. Further, there is no guide for selecting the appropriate metric for a given question, and different metrics are frequently used to address similar questions. To improve the choice, application, and interpretation of phylo‐diversity metrics, we organize existing metrics by expanding on a unifying framework for phylogenetic information. Generally, questions about phylogenetic relationships within or between assemblages tend to ask three types of question: how much; how different; or how regular? We show that these questions reflect three dimensions of a phylogenetic tree: richness, divergence, and regularity. We classify 70 existing phylo‐diversity metrics based on their mathematical form within these three dimensions and identify ‘anchor’ representatives: for α‐diversity metrics these are PD (Faith's phylogenetic diversity), MPD (mean pairwise distance), and VPD (variation of pairwise distances). By analysing mathematical formulae and using simulations, we use this framework to identify metrics that mix dimensions, and we provide a guide to choosing and using the most appropriate metrics. We show that metric choice requires connecting the research question with the correct dimension of the framework and that there are logical approaches to selecting and interpreting metrics. The guide outlined herein will help researchers navigate the current jungle of indices. PMID:26785932

A general theory of multimetric indices and their properties

USGS Publications Warehouse

Schoolmaster, Donald R.; Grace, James B.; Schweiger, E. William

2012-01-01

1. Stewardship of biological and ecological resources requires the ability to make integrative assessments of ecological integrity. One of the emerging methods for making such integrative assessments is multimetric indices (MMIs). These indices synthesize data, often from multiple levels of biological organization, with the goal of deriving a single index that reflects the overall effects of human disturbance. Despite the widespread use of MMIs, there is uncertainty about why this approach can be effective. An understanding of MMIs requires a quantitative theory that illustrates how the properties of candidate metrics relates to MMIs generated from those metrics. 2. We present the initial basis for such a theory by deriving the general mathematical characteristics of MMIs assembled from metrics. We then use the theory to derive quantitative answers to the following questions: Is there an optimal number of metrics to comprise an index? How does covariance among metrics affect the performance of the index derived from those metrics? And what are the criteria to decide whether a given metric will improve the performance of an index? 3. We find that the optimal number of metrics to be included in an index depends on the theoretical distribution of signal of the disturbance gradient contained in each metric. For example, if the rank-ordered parameters of a metric-disturbance regression can be described by a monotonically decreasing function, then an optimum number of metrics exists and can often be derived analytically. We derive the conditions by which adding a given metric can be expected to improve an index. 4. We find that the criterion defining such conditions depends nonlinearly of the signal of the disturbance gradient, the noise (error) of the metric and the correlation of the metric errors. Importantly, we find that correlation among metric errors increases the signal required for the metric to improve the index. 5. The theoretical framework presented in this

Changing to the Metric System.

ERIC Educational Resources Information Center

Chambers, Donald L.; Dowling, Kenneth W.

This report examines educational aspects of the conversion to the metric system of measurement in the United States. Statements of positions on metrication and basic mathematical skills are given from various groups. Base units, symbols, prefixes, and style of the metric system are outlined. Guidelines for teaching metric concepts are given,…

Software metrics: Software quality metrics for distributed systems. [reliability engineering

NASA Technical Reports Server (NTRS)

Post, J. V.

1981-01-01

Software quality metrics was extended to cover distributed computer systems. Emphasis is placed on studying embedded computer systems and on viewing them within a system life cycle. The hierarchy of quality factors, criteria, and metrics was maintained. New software quality factors were added, including survivability, expandability, and evolvability.

Implementing the Metric System in Agricultural Occupations. Metric Implementation Guide.

ERIC Educational Resources Information Center

Gilmore, Hal M.; And Others

Addressed to the agricultural education teacher, this guide is intended to provide appropriate information, viewpoints, and attitudes regarding the metric system and to make suggestions regarding presentation of the material in the classroom. An introductory section on teaching suggestions emphasizes the need for a "think metric" approach made up…

Implementing the Metric System in Health Occupations. Metric Implementation Guide.

ERIC Educational Resources Information Center

Banks, Wilson P.; And Others

Addressed to the health occupations education teacher, this guide is intended to provide appropriate information, viewpoints, and attitudes regarding the metric system and to make suggestions regarding presentation of the material in the classroom. An introductory section on teaching suggestions emphasizes the need for a "think metric" approach…

Metrics in Career Education.

ERIC Educational Resources Information Center

Lindbeck, John R.

The United States is rapidly becoming a metric nation. Industry, education, business, and government are all studying the issue of metrication to learn how they can prepare for it. The book is designed to help teachers and students in career education programs learn something about metrics. Presented in an easily understood manner, the textbook's…

Benchmarking Global Food Safety Performances: The Era of Risk Intelligence.

PubMed

Valleé, Jean-Charles Le; Charlebois, Sylvain

2015-10-01

Food safety data segmentation and limitations hamper the world's ability to select, build up, monitor, and evaluate food safety performance. Currently, there is no metric that captures the entire food safety system, and performance data are not collected strategically on a global scale. Therefore, food safety benchmarking is essential not only to help monitor ongoing performance but also to inform continued food safety system design, adoption, and implementation toward more efficient and effective food safety preparedness, responsiveness, and accountability. This comparative study identifies and evaluates common elements among global food safety systems. It provides an overall world ranking of food safety performance for 17 Organisation for Economic Co-Operation and Development (OECD) countries, illustrated by 10 indicators organized across three food safety risk governance domains: risk assessment (chemical risks, microbial risks, and national reporting on food consumption), risk management (national food safety capacities, food recalls, food traceability, and radionuclides standards), and risk communication (allergenic risks, labeling, and public trust). Results show all countries have very high food safety standards, but Canada and Ireland, followed by France, earned excellent grades relative to their peers. However, any subsequent global ranking study should consider the development of survey instruments to gather adequate and comparable national evidence on food safety.

Metrication report to the Congress

NASA Technical Reports Server (NTRS)

1990-01-01

The principal NASA metrication activities for FY 1989 were a revision of NASA metric policy and evaluation of the impact of using the metric system of measurement for the design and construction of the Space Station Freedom. Additional studies provided a basis for focusing follow-on activity. In FY 1990, emphasis will shift to implementation of metric policy and development of a long-range metrication plan. The report which follows addresses Policy Development, Planning and Program Evaluation, and Supporting Activities for the past and coming year.

Implementing the Metric System in Business Occupations. Metric Implementation Guide.

ERIC Educational Resources Information Center

Retzer, Kenneth A.; And Others

Addressed to the business education teacher, this guide is intended to provide appropriate information, viewpoints, and attitudes regarding the metric system and to make suggestions regarding presentation of the material in the classroom. An introductory section on teaching suggestions emphasizes the need for a "think metric" approach made up of…

Implementing the Metric System in Industrial Occupations. Metric Implementation Guide.

ERIC Educational Resources Information Center

Retzer, Kenneth A.

Addressed to the industrial education teacher, this guide is intended to provide appropriate information, viewpoints, and attitudes regarding the metric system and to make suggestions regarding presentation of the material in the classroom. An introductory section on teaching suggestions emphasizes the need for a "think metric" approach made up of…

The metric system: An introduction

NASA Astrophysics Data System (ADS)

Lumley, Susan M.

On 13 Jul. 1992, Deputy Director Duane Sewell restated the Laboratory's policy on conversion to the metric system which was established in 1974. Sewell's memo announced the Laboratory's intention to continue metric conversion on a reasonable and cost effective basis. Copies of the 1974 and 1992 Administrative Memos are contained in the Appendix. There are three primary reasons behind the Laboratory's conversion to the metric system. First, Public Law 100-418, passed in 1988, states that by the end of fiscal year 1992 the Federal Government must begin using metric units in grants, procurements, and other business transactions. Second, on 25 Jul. 1991, President George Bush signed Executive Order 12770 which urged Federal agencies to expedite conversion to metric units. Third, the contract between the University of California and the Department of Energy calls for the Laboratory to convert to the metric system. Thus, conversion to the metric system is a legal requirement and a contractual mandate with the University of California. Public Law 100-418 and Executive Order 12770 are discussed in more detail later in this section, but first they examine the reasons behind the nation's conversion to the metric system. The second part of this report is on applying the metric system.

All You Need to Know About Metric

ERIC Educational Resources Information Center

American Metric Journal, 1974

1974-01-01

Information found necessary for South Africa's citizens to learn during their recent conversion to the metric system is presented. Twelve terms and prefixes are suggested that satisfy practically all ordinary needs. Tables are given for the most commonly used measures, with relationships between different units indicated. (LS)

A no-reference video quality assessment metric based on ROI

NASA Astrophysics Data System (ADS)

Jia, Lixiu; Zhong, Xuefei; Tu, Yan; Niu, Wenjuan

2015-01-01

A no reference video quality assessment metric based on the region of interest (ROI) was proposed in this paper. In the metric, objective video quality was evaluated by integrating the quality of two compressed artifacts, i.e. blurring distortion and blocking distortion. The Gaussian kernel function was used to extract the human density maps of the H.264 coding videos from the subjective eye tracking data. An objective bottom-up ROI extraction model based on magnitude discrepancy of discrete wavelet transform between two consecutive frames, center weighted color opponent model, luminance contrast model and frequency saliency model based on spectral residual was built. Then only the objective saliency maps were used to compute the objective blurring and blocking quality. The results indicate that the objective ROI extraction metric has a higher the area under the curve (AUC) value. Comparing with the conventional video quality assessment metrics which measured all the video quality frames, the metric proposed in this paper not only decreased the computation complexity, but improved the correlation between subjective mean opinion score (MOS) and objective scores.

Attack-Resistant Trust Metrics

NASA Astrophysics Data System (ADS)

Levien, Raph

The Internet is an amazingly powerful tool for connecting people together, unmatched in human history. Yet, with that power comes great potential for spam and abuse. Trust metrics are an attempt to compute the set of which people are trustworthy and which are likely attackers. This chapter presents two specific trust metrics developed and deployed on the Advogato Website, which is a community blog for free software developers. This real-world experience demonstrates that the trust metrics fulfilled their goals, but that for good results, it is important to match the assumptions of the abstract trust metric computation to the real-world implementation.

Metric Issues for Small Business.

DTIC Science & Technology

1981-08-01

time, it seems that small business is meeting the problens (f ()ijutarv, metric conversion within its own resources ( manager ",a1, t, ,’bral, an...AD-AI07 861 UNITED STATES METRIC BOARD ARLINGTON VA FIG 5/3 METRIC ISSUES FOR SMALL BUSINESS . (U) UNCASIF AUG a I EHEHEi-17i i/ll/l///i//,° i MENNEN...METRIC ISSUES FOR SMALL BUSINESS EXECUTIVE SUMMARY DTIC ifELECT A This o@~ant )u enapo.I fW pu~~w Z. Ias ,!W% si~ts La-i UNITED STATES METRIC BOARD

Metrication report to the Congress

NASA Technical Reports Server (NTRS)

1991-01-01

NASA's principal metrication accomplishments for FY 1990 were establishment of metrication policy for major programs, development of an implementing instruction for overall metric policy and initiation of metrication planning for the major program offices. In FY 1991, development of an overall NASA plan and individual program office plans will be completed, requirement assessments will be performed for all support areas, and detailed assessment and transition planning will be undertaken at the institutional level. Metric feasibility decisions on a number of major programs are expected over the next 18 months.

Exploration of impact measures of safety belt use laws. Volume 2, Literature reviewed, expert team comments on indicators, and indicator catalog

DOT National Transportation Integrated Search

1990-02-01

This project identified, evaluated, and recommended indicators of safety belt use law (SBUL) impact (other than fatality reduction and observed belt usage) as well as institutional sources that collect them. The project involved an extensive literatu...

[A set of quality and safety indicators for hospitals of the "Agencia Valenciana de Salud"].

PubMed

Nebot-Marzal, C M; Mira-Solves, J J; Guilabert-Mora, M; Pérez-Jover, V; Pablo-Comeche, D; Quirós-Morató, T; Cuesta Peredo, D

2014-01-01

To prepare a set of quality and safety indicators for Hospitals of the «Agencia Valenciana de Salud». The qualitative technique Metaplan® was applied in order to gather proposals on sustainability and nursing. The catalogue of the «Spanish Society of Quality in Healthcare» was adopted as a starting point for clinical indicators. Using the Delphi technique, 207 professionals were invited to participate in the selecting the most reliable and feasible indicators. Lastly, the resulting proposal was validated with the managers of 12 hospitals, taking into account the variability, objectivity, feasibility, reliability and sensitivity, of the indicators. Participation rates varied between 66.67% and 80.71%. Of the 159 initial indicators, 68 were prioritized and selected (21 economic or management indicators, 22 nursing indicators, and 25 clinical or hospital indicators). Three of them were common to all three categories and two did not match the specified criteria during the validation phase, thus obtaining a final catalogue of 63 indicators. A set of quality and safety indicators for Hospitals was prepared. They are currently being monitored using the hospital information systems. Copyright © 2013 SECA. Published by Elsevier Espana. All rights reserved.

A guide to phylogenetic metrics for conservation, community ecology and macroecology.

PubMed

Tucker, Caroline M; Cadotte, Marc W; Carvalho, Silvia B; Davies, T Jonathan; Ferrier, Simon; Fritz, Susanne A; Grenyer, Rich; Helmus, Matthew R; Jin, Lanna S; Mooers, Arne O; Pavoine, Sandrine; Purschke, Oliver; Redding, David W; Rosauer, Dan F; Winter, Marten; Mazel, Florent

2017-05-01

The use of phylogenies in ecology is increasingly common and has broadened our understanding of biological diversity. Ecological sub-disciplines, particularly conservation, community ecology and macroecology, all recognize the value of evolutionary relationships but the resulting development of phylogenetic approaches has led to a proliferation of phylogenetic diversity metrics. The use of many metrics across the sub-disciplines hampers potential meta-analyses, syntheses, and generalizations of existing results. Further, there is no guide for selecting the appropriate metric for a given question, and different metrics are frequently used to address similar questions. To improve the choice, application, and interpretation of phylo-diversity metrics, we organize existing metrics by expanding on a unifying framework for phylogenetic information. Generally, questions about phylogenetic relationships within or between assemblages tend to ask three types of question: how much; how different; or how regular? We show that these questions reflect three dimensions of a phylogenetic tree: richness, divergence, and regularity. We classify 70 existing phylo-diversity metrics based on their mathematical form within these three dimensions and identify 'anchor' representatives: for α-diversity metrics these are PD (Faith's phylogenetic diversity), MPD (mean pairwise distance), and VPD (variation of pairwise distances). By analysing mathematical formulae and using simulations, we use this framework to identify metrics that mix dimensions, and we provide a guide to choosing and using the most appropriate metrics. We show that metric choice requires connecting the research question with the correct dimension of the framework and that there are logical approaches to selecting and interpreting metrics. The guide outlined herein will help researchers navigate the current jungle of indices. © 2016 The Authors. Biological Reviews published by John Wiley © Sons Ltd on behalf of

Test and Evaluation Metrics of Crew Decision-Making And Aircraft Attitude and Energy State Awareness

NASA Technical Reports Server (NTRS)

Bailey, Randall E.; Ellis, Kyle K. E.; Stephens, Chad L.

2013-01-01

NASA has established a technical challenge, under the Aviation Safety Program, Vehicle Systems Safety Technologies project, to improve crew decision-making and response in complex situations. The specific objective of this challenge is to develop data and technologies which may increase a pilot's (crew's) ability to avoid, detect, and recover from adverse events that could otherwise result in accidents/incidents. Within this technical challenge, a cooperative industry-government research program has been established to develop innovative flight deck-based counter-measures that can improve the crew's ability to avoid, detect, mitigate, and recover from unsafe loss-of-aircraft state awareness - specifically, the loss of attitude awareness (i.e., Spatial Disorientation, SD) or the loss-of-energy state awareness (LESA). A critical component of this research is to develop specific and quantifiable metrics which identify decision-making and the decision-making influences during simulation and flight testing. This paper reviews existing metrics and methods for SD testing and criteria for establishing visual dominance. The development of Crew State Monitoring technologies - eye tracking and other psychophysiological - are also discussed as well as emerging new metrics for identifying channelized attention and excessive pilot workload, both of which have been shown to contribute to SD/LESA accidents or incidents.

Integrated indicators are important metrics of catchment biogeochemical function

NASA Astrophysics Data System (ADS)

Howden, N. J. K.; Birgand, F.; Burt, T.; Worrall, F.

2017-12-01

There are many ways to characterise catchment biogeochemical behaviour, but most rely on sporadic measurements that capture transient, rather than steady-state behaviour and function. This is because the ongoing collection of water samples and flow data can be labour intensive and thus costly both in terms of money and time. We propose that key aspects of catchment biogeochemical function can only be determined by the collation of impacts of water quality and flow integrated over time. In this paper we will illustrate how spot sample data may be useful, but also how the integration of sample data over time begins to elucidate catchment functions that may not be apparent from sparse timeslices of information. We use a number of high-resolution time series of water quality and flow data to illustrate the utility of this approach for different determinands and suggest key priorities for both sampling and analysis in small to medium-sized catchments. Clearly it is impractical for high-frequency measurements to form the basis of a wide-ranging approach, due to the prevalence of infrequent sampling as a regulatory preference across much of the world. In order to make our results relevant to this wider perspective, we also consider how infrequent sampling regimes may be used to derive our preferred integrated metrics, and the uncertainties that will be propagated due to the lower timescales of sampling. We use data from Brittany (France), North Carolina (US) and Plynlimmon (UK) to consider how our results translate to different catchments.

Health impact metrics for air pollution management strategies

PubMed Central

Martenies, Sheena E.; Wilkins, Donele; Batterman, Stuart A.

2015-01-01

Health impact assessments (HIAs) inform policy and decision making by providing information regarding future health concerns, and quantitative HIAs now are being used for local and urban-scale projects. HIA results can be expressed using a variety of metrics that differ in meaningful ways, and guidance is lacking with respect to best practices for the development and use of HIA metrics. This study reviews HIA metrics pertaining to air quality management and presents evaluative criteria for their selection and use. These are illustrated in a case study where PM2.5 concentrations are lowered from 10 to 8 µg/m3 in an urban area of 1.8 million people. Health impact functions are used to estimate the number of premature deaths, unscheduled hospitalizations and other morbidity outcomes. The most common metric in recent quantitative HIAs has been the number of cases of adverse outcomes avoided. Other metrics include time-based measures, e.g., disability-adjusted life years (DALYs), monetized impacts, functional-unit based measures, e.g., benefits per ton of emissions reduced, and other economic indicators, e.g., cost-benefit ratios. These metrics are evaluated by considering their comprehensiveness, the spatial and temporal resolution of the analysis, how equity considerations are facilitated, and the analysis and presentation of uncertainty. In the case study, the greatest number of avoided cases occurs for low severity morbidity outcomes, e.g., asthma exacerbations (n=28,000) and minor-restricted activity days (n=37,000); while DALYs and monetized impacts are driven by the severity, duration and value assigned to a relatively low number of premature deaths (n=190 to 230 per year). The selection of appropriate metrics depends on the problem context and boundaries, the severity of impacts, and community values regarding health. The number of avoided cases provides an estimate of the number of people affected, and monetized impacts facilitate additional economic analyses

Health impact metrics for air pollution management strategies.

PubMed

Martenies, Sheena E; Wilkins, Donele; Batterman, Stuart A

2015-12-01

Health impact assessments (HIAs) inform policy and decision making by providing information regarding future health concerns, and quantitative HIAs now are being used for local and urban-scale projects. HIA results can be expressed using a variety of metrics that differ in meaningful ways, and guidance is lacking with respect to best practices for the development and use of HIA metrics. This study reviews HIA metrics pertaining to air quality management and presents evaluative criteria for their selection and use. These are illustrated in a case study where PM2.5 concentrations are lowered from 10 to 8μg/m(3) in an urban area of 1.8 million people. Health impact functions are used to estimate the number of premature deaths, unscheduled hospitalizations and other morbidity outcomes. The most common metric in recent quantitative HIAs has been the number of cases of adverse outcomes avoided. Other metrics include time-based measures, e.g., disability-adjusted life years (DALYs), monetized impacts, functional-unit based measures, e.g., benefits per ton of emissions reduced, and other economic indicators, e.g., cost-benefit ratios. These metrics are evaluated by considering their comprehensiveness, the spatial and temporal resolution of the analysis, how equity considerations are facilitated, and the analysis and presentation of uncertainty. In the case study, the greatest number of avoided cases occurs for low severity morbidity outcomes, e.g., asthma exacerbations (n=28,000) and minor-restricted activity days (n=37,000); while DALYs and monetized impacts are driven by the severity, duration and value assigned to a relatively low number of premature deaths (n=190 to 230 per year). The selection of appropriate metrics depends on the problem context and boundaries, the severity of impacts, and community values regarding health. The number of avoided cases provides an estimate of the number of people affected, and monetized impacts facilitate additional economic analyses

Resilience-based performance metrics for water resources management under uncertainty

NASA Astrophysics Data System (ADS)

Roach, Tom; Kapelan, Zoran; Ledbetter, Ralph

2018-06-01

This paper aims to develop new, resilience type metrics for long-term water resources management under uncertain climate change and population growth. Resilience is defined here as the ability of a water resources management system to 'bounce back', i.e. absorb and then recover from a water deficit event, restoring the normal system operation. Ten alternative metrics are proposed and analysed addressing a range of different resilience aspects including duration, magnitude, frequency and volume of related water deficit events. The metrics were analysed on a real-world case study of the Bristol Water supply system in the UK and compared with current practice. The analyses included an examination of metrics' sensitivity and correlation, as well as a detailed examination into the behaviour of metrics during water deficit periods. The results obtained suggest that multiple metrics which cover different aspects of resilience should be used simultaneously when assessing the resilience of a water resources management system, leading to a more complete understanding of resilience compared with current practice approaches. It was also observed that calculating the total duration of a water deficit period provided a clearer and more consistent indication of system performance compared to splitting the deficit periods into the time to reach and time to recover from the worst deficit events.

Towards the construction of health workforce metrics for Latin America and the Caribbean

PubMed Central

2011-01-01

Introduction One of the components of the Health Observatory for Latin American and the Caribbean (HO-LAC) is the design and implementation of metrics for human resources for health. Under the HO-LAC initiative, researchers from nine countries in the region formed the Collaborative Community on Human Resources for Health in Latin America and the Caribbean to identify common metrics applicable to the field of human resources for health (HRH). Case description The case description comprises three stages: a) the origins of an initiative in which a non-governmental organization brings together researchers involved in HRH policy in LAC, b) a literature search to identify initiatives to develop methods and metrics to assess the HRH field in the region, and c) subsequent discussions held by the group of researchers regarding the possibilities of identifying an appropriate set of metrics and indicators to assess HRH throughout the region. Discussion and evaluation A total of 101 documents produced between 1985 and 2008 in the LAC region were identified. Thirty-three of the papers included a variety of measurements comprising counts, percentages, proportions, indicators, averages and metrics, but only 13 were able to fully describe the methods used to identify these metrics and indicators. Of the 33 articles with measurements, 47% addressed labor market issues, 25% were about working conditions, 23% were on HRH training and 5% addressed regulations. Based on these results, through iterative discussions, metrics were defined into three broad categories (training, labor market and working conditions) and available sources of information for their estimation were proposed. While only three of the countries have data on working conditions, all countries have sufficient data to measure at least one aspect of HRH training and the HRH labor market. Conclusions Information gleaned from HRH metrics makes it possible to carry out comparisons on a determined experience in space and

Operating room metrics score card-creating a prototype for individualized feedback.

PubMed

Gabriel, Rodney A; Gimlich, Robert; Ehrenfeld, Jesse M; Urman, Richard D

2014-11-01

The balance between reducing costs and inefficiencies with that of patient safety is a challenging problem faced in the operating room suite. An ongoing challenge is the creation of effective strategies that reduce these inefficiencies and provide real-time personalized metrics and electronic feedback to anesthesia practitioners. We created a sample report card structure, utilizing existing informatics systems. This system allows to gather and analyze operating room metrics for each anesthesia provider and offer personalized feedback. To accomplish this task, we identified key metrics that represented time and quality parameters. We collected these data for individual anesthesiologists and compared performance to the overall group average. Data were presented as an electronic score card and made available to individual clinicians on a real-time basis in an effort to provide effective feedback. These metrics included number of cancelled cases, average turnover time, average time to operating room ready and patient in room, number of delayed first case starts, average induction time, average extubation time, average time to recovery room arrival to discharge, performance feedback from other providers, compliance to various protocols, and total anesthetic costs. The concept we propose can easily be generalized to a variety of operating room settings, types of facilities and OR health care professionals. Such a scorecard can be created using content that is important for operating room efficiency, research, and practice improvement for anesthesia providers.

7 CFR 1794.4 - Metric units.

Code of Federal Regulations, 2014 CFR

2014-01-01

... environmental documents using non-metric equivalents with one of the following two options; metric units in parentheses immediately following the non-metric equivalents or a metric conversion table as an appendix...

7 CFR 1794.4 - Metric units.

Code of Federal Regulations, 2010 CFR

2010-01-01

... environmental documents using non-metric equivalents with one of the following two options; metric units in parentheses immediately following the non-metric equivalents or a metric conversion table as an appendix...

7 CFR 1794.4 - Metric units.

Code of Federal Regulations, 2013 CFR

2013-01-01

... environmental documents using non-metric equivalents with one of the following two options; metric units in parentheses immediately following the non-metric equivalents or a metric conversion table as an appendix...

7 CFR 1794.4 - Metric units.

Code of Federal Regulations, 2011 CFR

2011-01-01

... environmental documents using non-metric equivalents with one of the following two options; metric units in parentheses immediately following the non-metric equivalents or a metric conversion table as an appendix...

7 CFR 1794.4 - Metric units.

Code of Federal Regulations, 2012 CFR

2012-01-01

... environmental documents using non-metric equivalents with one of the following two options; metric units in parentheses immediately following the non-metric equivalents or a metric conversion table as an appendix...

Do-It-Yourself Metrics

ERIC Educational Resources Information Center

Klubeck, Martin; Langthorne, Michael; Padgett, Don

2006-01-01

Something new is on the horizon, and depending on one's role on campus, it might be storm clouds or a cleansing shower. Either way, no matter how hard one tries to avoid it, sooner rather than later he/she will have to deal with metrics. Metrics do not have to cause fear and resistance. Metrics can, and should, be a powerful tool for improvement.…

Hyperkahler metrics on focus-focus fibrations

NASA Astrophysics Data System (ADS)

Zhao, Jie

In this thesis, we focus on the study of hyperkahler metric in four dimensional cases, and practice GMN's construction of hyperkahler metric on focus-focus fibrations. We explicitly compute the action-angle coordinates on the local model of focus-focus fibration, and show its semi-global invariant should be harmonic to admit a compatible holomorphic 2-form. Then we study the canonical semi-flat metric on it. After the instanton correction inspired by physics, we get a family of the generalized Ooguri-Vafa metric on focus-focus fibrations, which becomes more local examples of explicit hyperkahler metric in four dimensional cases. In addition, we also make some exploration of the Ooguri-Vafa metric in the thesis. We study the potential function of the Ooguri-Vafa metric, and prove that its nodal set is a cylinder of bounded radius 1 < R < 1. As a result, we get that only on a finite neighborhood of the singular fibre the Ooguri-Vafa metric is a hyperkahler metric. Finally, we give some estimates for the diameter of the fibration under the Oogui-Vafa metric, which confirms that the Oogui-Vafa metric is not complete. The new family of metric constructed in the thesis, we think, will provide more examples to further study of Lagrangian fibrations and mirror symmetry in future.

Serious injuries: an additional indicator to fatalities for road safety benchmarking.

PubMed

Shen, Yongjun; Hermans, Elke; Bao, Qiong; Brijs, Tom; Wets, Geert

2015-01-01

Almost all of the current road safety benchmarking studies focus entirely on fatalities, which, however, represent only one measure of the magnitude of the road safety problem. The main objective of this article was to investigate the possibility of including the number of serious injuries in addition to the number of fatalities for road safety benchmarking and to further illuminate its impact on the countries' rankings. We introduced the technique of data envelopment analysis (DEA) to the road safety domain and developed a DEA-based road safety model (DEA-RS) in this study. Moreover, we outlined different types of possible weight restrictions and adopted 2 of them to indicate the relationship between road fatalities and serious injuries for the sake of rational benchmarking. One was a relative weight restriction based on the information of their shadow price, and the other was a virtual weight restriction using a priori knowledge about the importance level of these 2 aspects. By computing the most optimal road safety risk scores of 10 European countries based on the different models, we found that United Kingdom was the only best-performing country no matter which model was utilized. However, countries such as The Netherlands, Sweden, and Switzerland were no longer best-performing when the serious injuries were integrated. On the contrary, Spain, which ranked almost at the bottom among all of the countries when only the number of road fatalities was considered, became a relatively well-performing country when integrating its number of serious injuries in the evaluation. In general, no matter whether the country's road safety ranking was improved or deteriorated, most of the countries achieved a higher risk score when the number of serious injuries was included, which implied that compared to the road fatalities, more policy attention has to be paid to improve the situation of serious injuries in most countries. Given the importance of considering the serious

Using community-level metrics to monitor the effects of marine protected areas on biodiversity.

PubMed

Soykan, Candan U; Lewison, Rebecca L

2015-06-01

Marine protected areas (MPAs) are used to protect species, communities, and their associated habitats, among other goals. Measuring MPA efficacy can be challenging, however, particularly when considering responses at the community level. We gathered 36 abundance and 14 biomass data sets on fish assemblages and used meta-analysis to evaluate the ability of 22 distinct community diversity metrics to detect differences in community structure between MPAs and nearby control sites. We also considered the effects of 6 covariates-MPA size and age, MPA size and age interaction, latitude, total species richness, and level of protection-on each metric. Some common metrics, such as species richness and Shannon diversity, did not differ consistently between MPA and control sites, whereas other metrics, such as total abundance and biomass, were consistently different across studies. Metric responses derived from the biomass data sets were more consistent than those based on the abundance data sets, suggesting that community-level biomass differs more predictably than abundance between MPA and control sites. Covariate analyses indicated that level of protection, latitude, MPA size, and the interaction between MPA size and age affect metric performance. These results highlight a handful of metrics, several of which are little known, that could be used to meet the increasing demand for community-level indicators of MPA effectiveness. © 2015 Society for Conservation Biology.

Exploring the state of health and safety management system performance measurement in mining organizations.

PubMed

Haas, Emily Joy; Yorio, Patrick

2016-03-01

Complex arguments continue to be articulated regarding the theoretical foundation of health and safety management system (HSMS) performance measurement. The culmination of these efforts has begun to enhance a collective understanding. Despite this enhanced theoretical understanding, however, there are still continuing debates and little consensus. The goal of the current research effort was to empirically explore common methods to HSMS performance measurement in mining organizations. The purpose was to determine if value and insight could be added into the ongoing approaches of the best ways to engage in health and safety performance measurement. Nine site-level health and safety management professionals were provided with 133 practices corresponding to 20 HSMS elements, each fitting into the plan, do, check, act phases common to most HSMS. Participants were asked to supply detailed information as to how they (1) assess the performance of each practice in their organization, or (2) would assess each practice if it were an identified strategic imperative. Qualitative content analysis indicated that the approximately 1200 responses provided could be described and categorized into interventions , organizational performance , and worker performance . A discussion of how these categories relate to existing indicator frameworks is provided. The analysis also revealed divergence in two important measurement issues; (1) quantitative vs qualitative measurement and reporting; and (2) the primary use of objective or subjective metrics. In lieu of these findings we ultimately recommend a balanced measurement and reporting approach within the three metric categories and conclude with suggestions for future research.

Holographic Spherically Symmetric Metrics

NASA Astrophysics Data System (ADS)

Petri, Michael

The holographic principle (HP) conjectures, that the maximum number of degrees of freedom of any realistic physical system is proportional to the system's boundary area. The HP has its roots in the study of black holes. It has recently been applied to cosmological solutions. In this article we apply the HP to spherically symmetric static space-times. We find that any regular spherically symmetric object saturating the HP is subject to tight constraints on the (interior) metric, energy-density, temperature and entropy-density. Whenever gravity can be described by a metric theory, gravity is macroscopically scale invariant and the laws of thermodynamics hold locally and globally, the (interior) metric of a regular holographic object is uniquely determined up to a constant factor and the interior matter-state must follow well defined scaling relations. When the metric theory of gravity is general relativity, the interior matter has an overall string equation of state (EOS) and a unique total energy-density. Thus the holographic metric derived in this article can serve as simple interior 4D realization of Mathur's string fuzzball proposal. Some properties of the holographic metric and its possible experimental verification are discussed. The geodesics of the holographic metric describe an isotropically expanding (or contracting) universe with a nearly homogeneous matter-distribution within the local Hubble volume. Due to the overall string EOS the active gravitational mass-density is zero, resulting in a coasting expansion with Ht = 1, which is compatible with the recent GRB-data.

Metrics for Labeled Markov Systems

NASA Technical Reports Server (NTRS)

Desharnais, Josee; Jagadeesan, Radha; Gupta, Vineet; Panangaden, Prakash

1999-01-01

Partial Labeled Markov Chains are simultaneously generalizations of process algebra and of traditional Markov chains. They provide a foundation for interacting discrete probabilistic systems, the interaction being synchronization on labels as in process algebra. Existing notions of process equivalence are too sensitive to the exact probabilities of various transitions. This paper addresses contextual reasoning principles for reasoning about more robust notions of "approximate" equivalence between concurrent interacting probabilistic systems. The present results indicate that:We develop a family of metrics between partial labeled Markov chains to formalize the notion of distance between processes. We show that processes at distance zero are bisimilar. We describe a decision procedure to compute the distance between two processes. We show that reasoning about approximate equivalence can be done compositionally by showing that process combinators do not increase distance. We introduce an asymptotic metric to capture asymptotic properties of Markov chains; and show that parallel composition does not increase asymptotic distance.

Think Metric

USGS Publications Warehouse

,

1978-01-01

The International System of Units, as the metric system is officially called, provides for a single "language" to describe weights and measures over the world. We in the United States together with the people of Brunei, Burma, and Yemen are the only ones who have not put this convenient system into effect. In the passage of the Metric Conversion Act of 1975, Congress determined that we also will adopt it, but the transition will be voluntary.

Equilibrium thermodynamics and neutrino decoupling in quasi-metric cosmology

NASA Astrophysics Data System (ADS)

Østvang, Dag

2018-05-01

The laws of thermodynamics in the expanding universe are formulated within the quasi-metric framework. The quasi-metric cosmic expansion does not directly influence momenta of material particles, so the expansion directly cools null particles only (e.g., photons). Therefore, said laws differ substantially from their counterparts in standard cosmology. Consequently, all non-null neutrino mass eigenstates are predicted to have the same energy today as they had just after neutrino decoupling in the early universe. This indicates that the predicted relic neutrino background is strongly inconsistent with detection rates measured in solar neutrino detectors (Borexino in particular). Thus quasi-metric cosmology is in violent conflict with experiment unless some exotic property of neutrinos makes the relic neutrino background essentially undetectable (e.g., if all massive mass eigenstates decay into "invisible" particles over cosmic time scales). But in absence of hard evidence in favour of the necessary exotic neutrino physics needed to resolve said conflict, the current status of quasi-metric relativity has been changed to non-viable.

Evaluation of Vehicle-Based Crash Severity Metrics.

PubMed

Tsoi, Ada H; Gabler, Hampton C

2015-01-01

Vehicle change in velocity (delta-v) is a widely used crash severity metric used to estimate occupant injury risk. Despite its widespread use, delta-v has several limitations. Of most concern, delta-v is a vehicle-based metric which does not consider the crash pulse or the performance of occupant restraints, e.g. seatbelts and airbags. Such criticisms have prompted the search for alternative impact severity metrics based upon vehicle kinematics. The purpose of this study was to assess the ability of the occupant impact velocity (OIV), acceleration severity index (ASI), vehicle pulse index (VPI), and maximum delta-v (delta-v) to predict serious injury in real world crashes. The study was based on the analysis of event data recorders (EDRs) downloaded from the National Automotive Sampling System / Crashworthiness Data System (NASS-CDS) 2000-2013 cases. All vehicles in the sample were GM passenger cars and light trucks involved in a frontal collision. Rollover crashes were excluded. Vehicles were restricted to single-event crashes that caused an airbag deployment. All EDR data were checked for a successful, completed recording of the event and that the crash pulse was complete. The maximum abbreviated injury scale (MAIS) was used to describe occupant injury outcome. Drivers were categorized into either non-seriously injured group (MAIS2-) or seriously injured group (MAIS3+), based on the severity of any injuries to the thorax, abdomen, and spine. ASI and OIV were calculated according to the Manual for Assessing Safety Hardware. VPI was calculated according to ISO/TR 12353-3, with vehicle-specific parameters determined from U.S. New Car Assessment Program crash tests. Using binary logistic regression, the cumulative probability of injury risk was determined for each metric and assessed for statistical significance, goodness-of-fit, and prediction accuracy. The dataset included 102,744 vehicles. A Wald chi-square test showed each vehicle-based crash severity metric

Semantic Metrics for Analysis of Software

NASA Technical Reports Server (NTRS)

Etzkorn, Letha H.; Cox, Glenn W.; Farrington, Phil; Utley, Dawn R.; Ghalston, Sampson; Stein, Cara

2005-01-01

A recently conceived suite of object-oriented software metrics focus is on semantic aspects of software, in contradistinction to traditional software metrics, which focus on syntactic aspects of software. Semantic metrics represent a more human-oriented view of software than do syntactic metrics. The semantic metrics of a given computer program are calculated by use of the output of a knowledge-based analysis of the program, and are substantially more representative of software quality and more readily comprehensible from a human perspective than are the syntactic metrics.

Handbook of aircraft noise metrics

NASA Technical Reports Server (NTRS)

Bennett, R. L.; Pearsons, K. S.

1981-01-01

Information is presented on 22 noise metrics that are associated with the measurement and prediction of the effects of aircraft noise. Some of the instantaneous frequency weighted sound level measures, such as A-weighted sound level, are used to provide multiple assessment of the aircraft noise level. Other multiple event metrics, such as day-night average sound level, were designed to relate sound levels measured over a period of time to subjective responses in an effort to determine compatible land uses and aid in community planning. The various measures are divided into: (1) instantaneous sound level metrics; (2) duration corrected single event metrics; (3) multiple event metrics; and (4) speech communication metrics. The scope of each measure is examined in terms of its: definition, purpose, background, relationship to other measures, calculation method, example, equipment, references, and standards.

Handbook of aircraft noise metrics

NASA Astrophysics Data System (ADS)

Bennett, R. L.; Pearsons, K. S.

1981-03-01

Information is presented on 22 noise metrics that are associated with the measurement and prediction of the effects of aircraft noise. Some of the instantaneous frequency weighted sound level measures, such as A-weighted sound level, are used to provide multiple assessment of the aircraft noise level. Other multiple event metrics, such as day-night average sound level, were designed to relate sound levels measured over a period of time to subjective responses in an effort to determine compatible land uses and aid in community planning. The various measures are divided into: (1) instantaneous sound level metrics; (2) duration corrected single event metrics; (3) multiple event metrics; and (4) speech communication metrics. The scope of each measure is examined in terms of its: definition, purpose, background, relationship to other measures, calculation method, example, equipment, references, and standards.

A metric for success

NASA Astrophysics Data System (ADS)

Carver, Gary P.

1994-05-01

The federal agencies are working with industry to ease adoption of the metric system. The goal is to help U.S. industry compete more successfully in the global marketplace, increase exports, and create new jobs. The strategy is to use federal procurement, financial assistance, and other business-related activities to encourage voluntary conversion. Based upon the positive experiences of firms and industries that have converted, federal agencies have concluded that metric use will yield long-term benefits that are beyond any one-time costs or inconveniences. It may be time for additional steps to move the Nation out of its dual-system comfort zone and continue to progress toward metrication. This report includes 'Metric Highlights in U.S. History'.

Perioperative patient safety indicators and hospital surgical volumes.

PubMed

Kitazawa, Takefumi; Matsumoto, Kunichika; Fujita, Shigeru; Yoshida, Ai; Iida, Shuhei; Nishizawa, Hirotoshi; Hasegawa, Tomonori

2014-02-28

Since the late 1990s, patient safety has been an important policy issue in developed countries. To evaluate the effectiveness of the activities of patient safety, it is necessary to quantitatively assess the incidence of adverse events by types of failure mode using tangible data. The purpose of this study is to calculate patient safety indicators (PSIs) using the Japanese Diagnosis Procedure Combination/per-diem payment system (DPC/PDPS) reimbursement data and to elucidate the relationship between perioperative PSIs and hospital surgical volume. DPC/PDPS data of the Medi-Target project managed by the All Japan Hospital Association were used. An observational study was conducted where PSIs were calculated using an algorithm proposed by the US Agency for Healthcare Research and Quality. We analyzed data of 1,383,872 patients from 188 hospitals who were discharged from January 2008 to December 2010. Among 20 provider level PSIs, four PSIs (three perioperative PSIs and decubitus ulcer) and mortality rates of postoperative patients were related to surgical volume. Low-volume hospitals (less than 33rd percentiles surgical volume per month) had higher mortality rates (5.7%, 95% confidence interval (CI), 3.9% to 7.4%) than mid- (2.9%, 95% CI, 2.6% to 3.3%) or high-volume hospitals (2.7%, 95% CI, 2.5% to 2.9%). Low-volume hospitals had more deaths among surgical inpatients with serious treatable complications (38.5%, 95% CI, 33.7% to 43.2%) than high-volume hospitals (21.4%, 95% CI, 19.0% to 23.9%). Also Low-volume hospitals had lower proportion of difficult surgeries (54.9%, 95% CI, 50.1% to 59.8%) compared with high-volume hospitals (63.4%, 95% CI, 62.3% to 64.6%). In low-volume hospitals, limited experience may have led to insufficient care for postoperative complications. We demonstrated that PSIs can be calculated using DPC/PDPS data and perioperative PSIs were related to hospital surgical volume. Further investigations focusing on identifying risk factors for poor

Updating of Safety Criteria for Basic Diagnostic Indicators of Dam at the Sayano-Shushenskaya HPP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gordon, L. A.; Skvortsova, A. E.

2013-09-15

Values of diagnostic indicators [K]-limitations placed on radial displacements and turn angles of horizontal sections of the dam - which are permitted for each upper-pool level within the range from 520 to 539 m are determined and proposed for inclusion in the Declaration of Safety. Empirical relationships used to develop safety criteria K1 and K2 are modified.

Complexity Management Using Metrics for Trajectory Flexibility Preservation and Constraint Minimization

NASA Technical Reports Server (NTRS)

Idris, Husni; Shen, Ni; Wing, David J.

2011-01-01

The growing demand for air travel is increasing the need for mitigating air traffic congestion and complexity problems, which are already at high levels. At the same time new surveillance, navigation, and communication technologies are enabling major transformations in the air traffic management system, including net-based information sharing and collaboration, performance-based access to airspace resources, and trajectory-based rather than clearance-based operations. The new system will feature different schemes for allocating tasks and responsibilities between the ground and airborne agents and between the human and automation, with potential capacity and cost benefits. Therefore, complexity management requires new metrics and methods that can support these new schemes. This paper presents metrics and methods for preserving trajectory flexibility that have been proposed to support a trajectory-based approach for complexity management by airborne or ground-based systems. It presents extensions to these metrics as well as to the initial research conducted to investigate the hypothesis that using these metrics to guide user and service provider actions will naturally mitigate traffic complexity. The analysis showed promising results in that: (1) Trajectory flexibility preservation mitigated traffic complexity as indicated by inducing self-organization in the traffic patterns and lowering traffic complexity indicators such as dynamic density and traffic entropy. (2)Trajectory flexibility preservation reduced the potential for secondary conflicts in separation assurance. (3) Trajectory flexibility metrics showed potential application to support user and service provider negotiations for minimizing the constraints imposed on trajectories without jeopardizing their objectives.

Metric Ranking of Invariant Networks with Belief Propagation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tao, Changxia; Ge, Yong; Song, Qinbao

The management of large-scale distributed information systems relies on the effective use and modeling of monitoring data collected at various points in the distributed information systems. A promising approach is to discover invariant relationships among the monitoring data and generate invariant networks, where a node is a monitoring data source (metric) and a link indicates an invariant relationship between two monitoring data. Such an invariant network representation can help system experts to localize and diagnose the system faults by examining those broken invariant relationships and their related metrics, because system faults usually propagate among the monitoring data and eventually leadmore » to some broken invariant relationships. However, at one time, there are usually a lot of broken links (invariant relationships) within an invariant network. Without proper guidance, it is difficult for system experts to manually inspect this large number of broken links. Thus, a critical challenge is how to effectively and efficiently rank metrics (nodes) of invariant networks according to the anomaly levels of metrics. The ranked list of metrics will provide system experts with useful guidance for them to localize and diagnose the system faults. To this end, we propose to model the nodes and the broken links as a Markov Random Field (MRF), and develop an iteration algorithm to infer the anomaly of each node based on belief propagation (BP). Finally, we validate the proposed algorithm on both realworld and synthetic data sets to illustrate its effectiveness.« less

Scholarly Metrics Baseline: A Survey of Faculty Knowledge, Use, and Opinion about Scholarly Metrics

ERIC Educational Resources Information Center

DeSanto, Dan; Nichols, Aaron

2017-01-01

This article presents the results of a faculty survey conducted at the University of Vermont during academic year 2014-2015. The survey asked faculty about: familiarity with scholarly metrics, metric-seeking habits, help-seeking habits, and the role of metrics in their department's tenure and promotion process. The survey also gathered faculty…

Say "Yes" to Metric Measure.

ERIC Educational Resources Information Center

Monroe, Eula Ewing; Nelson, Marvin N.

2000-01-01

Provides a brief history of the metric system. Discusses the infrequent use of the metric measurement system in the United States, why conversion from the customary system to the metric system is difficult, and the need for change. (Contains 14 resources.) (ASK)

Introduction to Metrics.

ERIC Educational Resources Information Center

Edgecomb, Philip L.; Shapiro, Marion

Addressed to vocational, or academic middle or high school students, this book reviews mathematics fundamentals using metric units of measurement. It utilizes a common-sense approach to the degree of accuracy needed in solving actual trade and every-day problems. Stress is placed on reading off metric measurements from a ruler or tape, and on…

Metric System Unit.

ERIC Educational Resources Information Center

Maggi, Gayle J. B.

Thirty-six lessons for introducing the metric system are outlined. Appropriate grade level is not specified. The metric lessons suggested include 13 lessons on length, 7 lessons on mass, 11 lessons on capacity, and 5 lessons on temperature. Each lesson includes a list of needed materials, a statement of the lesson purpose, and suggested…

Statistical estimation of ozone exposure metrics

NASA Astrophysics Data System (ADS)

Blankenship, Erin E.; Stefanski, L. A.

Data from recent experiments at North Carolina State University and other locations provide a unique opportunity to study the effect of ambient ozone on the growth of clover. The data consist of hourly ozone measurements over a 140 day growing season at eight sites in the US, coupled with clover growth response data measured every 28 days. The objective is to model an indicator of clover growth as a function of ozone exposure. A common strategy for dealing with the numerous hourly ozone measurements is to reduce these to a single summary measurement, a so-called exposure metric, for the growth period of interest. However, the mean ozone value is not necessarily the best summarization, as it is widely believed that low levels of ozone have a negligible effect on growth, whereas peak ozone values are deleterious to plant growth. There are also suspected interactions with available sunlight, temperature and humidity. A number of exposure metrics have been proposed that reflect these beliefs by assigning different weights to ozone values according to magnitude, time of day, temperature and humidity. These weighting schemes generally depend on parameters that have, to date, been subjectively determined. We propose a statistical approach based on profile likelihoods to estimate the parameters in these exposure metrics.

Assessing Sustainability When Data Availability Limits Real-Time Estimates: Using Near-Time Indicators to Extend Sustainability Metrics

EPA Science Inventory

We produced a scientifically defensible methodology to assess whether a regional system is on a sustainable path. The approach required readily available data, metrics applicable to the relevant scale, and results useful to decision makers. We initiated a pilot project to test ...

Some References on Metric Information.

ERIC Educational Resources Information Center

National Bureau of Standards (DOC), Washington, DC.

This resource work lists metric information published by the U.S. Government and the American National Standards Institute. Also organizations marketing metric materials for education are given. A short table of conversions is included as is a listing of basic metric facts for everyday living. (LS)

Development of indicators for measuring outcomes of water safety plans

PubMed Central

Lockhart, Gabriella; Oswald, William E.; Hubbard, Brian; Medlin, Elizabeth; Gelting, Richard J.

2015-01-01

Water safety plans (WSPs) are endorsed by the World Health Organization as the most effective method of protecting a water supply. With the increase in WSPs worldwide, several valuable resources have been developed to assist practitioners in the implementation of WSPs, yet there is still a need for a practical and standardized method of evaluating WSP effectiveness. In 2012, the Centers for Disease Control and Prevention (CDC) published a conceptual framework for the evaluation of WSPs, presenting four key outcomes of the WSP process: institutional, operational, financial and policy change. In this paper, we seek to operationalize this conceptual framework by providing a set of simple and practical indicators for assessing WSP outcomes. Using CDC’s WSP framework as a foundation and incorporating various existing performance monitoring indicators for water utilities, we developed a set of approximately 25 indicators of institutional, operational, financial and policy change within the WSP context. These outcome indicators hold great potential for the continued implementation and expansion of WSPs worldwide. Having a defined framework for evaluating a WSP’s effectiveness, along with a set of measurable indicators by which to carry out that evaluation, will help implementers assess key WSP outcomes internally, as well as benchmark their progress against other WSPs in their region and globally. PMID:26361540

Resolving Partial Name Mentions Using String Metrics

DTIC Science & Technology

2007-12-01

Ladin) Pair 5: ( Franz Liszt , Franz Listz) These examples typically require one or two string edits to revert from the source to the target name...0.9556 Franz Listz Franz Liszt 2 0.1818 9 franz listz|fran z lisz 0.8182 0.9697 0.9818 The Levenshtein distance metric gives some indication of

Analysis of Network Clustering Algorithms and Cluster Quality Metrics at Scale

PubMed Central

Kobourov, Stephen; Gallant, Mike; Börner, Katy

2016-01-01

Overview Notions of community quality underlie the clustering of networks. While studies surrounding network clustering are increasingly common, a precise understanding of the realtionship between different cluster quality metrics is unknown. In this paper, we examine the relationship between stand-alone cluster quality metrics and information recovery metrics through a rigorous analysis of four widely-used network clustering algorithms—Louvain, Infomap, label propagation, and smart local moving. We consider the stand-alone quality metrics of modularity, conductance, and coverage, and we consider the information recovery metrics of adjusted Rand score, normalized mutual information, and a variant of normalized mutual information used in previous work. Our study includes both synthetic graphs and empirical data sets of sizes varying from 1,000 to 1,000,000 nodes. Cluster Quality Metrics We find significant differences among the results of the different cluster quality metrics. For example, clustering algorithms can return a value of 0.4 out of 1 on modularity but score 0 out of 1 on information recovery. We find conductance, though imperfect, to be the stand-alone quality metric that best indicates performance on the information recovery metrics. Additionally, our study shows that the variant of normalized mutual information used in previous work cannot be assumed to differ only slightly from traditional normalized mutual information. Network Clustering Algorithms Smart local moving is the overall best performing algorithm in our study, but discrepancies between cluster evaluation metrics prevent us from declaring it an absolutely superior algorithm. Interestingly, Louvain performed better than Infomap in nearly all the tests in our study, contradicting the results of previous work in which Infomap was superior to Louvain. We find that although label propagation performs poorly when clusters are less clearly defined, it scales efficiently and accurately to large

Reliability of TMS metrics in patients with chronic incomplete spinal cord injury.

PubMed

Potter-Baker, K A; Janini, D P; Frost, F S; Chabra, P; Varnerin, N; Cunningham, D A; Sankarasubramanian, V; Plow, E B

2016-11-01

Test-retest reliability analysis in individuals with chronic incomplete spinal cord injury (iSCI). The purpose of this study was to examine the reliability of neurophysiological metrics acquired with transcranial magnetic stimulation (TMS) in individuals with chronic incomplete tetraplegia. Cleveland Clinic Foundation, Cleveland, Ohio, USA. TMS metrics of corticospinal excitability, output, inhibition and motor map distribution were collected in muscles with a higher MRC grade and muscles with a lower MRC grade on the more affected side of the body. Metrics denoting upper limb function were also collected. All metrics were collected at two sessions separated by a minimum of two weeks. Reliability between sessions was determined using Spearman's correlation coefficients and concordance correlation coefficients (CCCs). We found that TMS metrics that were acquired in higher MRC grade muscles were approximately two times more reliable than those collected in lower MRC grade muscles. TMS metrics of motor map output, however, demonstrated poor reliability regardless of muscle choice (P=0.34; CCC=0.51). Correlation analysis indicated that patients with more baseline impairment and/or those in a more chronic phase of iSCI demonstrated greater variability of metrics. In iSCI, reliability of TMS metrics varies depending on the muscle grade of the tested muscle. Variability is also influenced by factors such as baseline motor function and time post SCI. Future studies that use TMS metrics in longitudinal study designs to understand functional recovery should be cautious as choice of muscle and clinical characteristics can influence reliability.

Flightdeck Automation Problems (FLAP) Model for Safety Technology Portfolio Assessment

NASA Technical Reports Server (NTRS)

Ancel, Ersin; Shih, Ann T.

2014-01-01

NASA's Aviation Safety Program (AvSP) develops and advances methodologies and technologies to improve air transportation safety. The Safety Analysis and Integration Team (SAIT) conducts a safety technology portfolio assessment (PA) to analyze the program content, to examine the benefits and risks of products with respect to program goals, and to support programmatic decision making. The PA process includes systematic identification of current and future safety risks as well as tracking several quantitative and qualitative metrics to ensure the program goals are addressing prominent safety risks accurately and effectively. One of the metrics within the PA process involves using quantitative aviation safety models to gauge the impact of the safety products. This paper demonstrates the role of aviation safety modeling by providing model outputs and evaluating a sample of portfolio elements using the Flightdeck Automation Problems (FLAP) model. The model enables not only ranking of the quantitative relative risk reduction impact of all portfolio elements, but also highlighting the areas with high potential impact via sensitivity and gap analyses in support of the program office. Although the model outputs are preliminary and products are notional, the process shown in this paper is essential to a comprehensive PA of NASA's safety products in the current program and future programs/projects.

Going Metric: Looking Ahead. Report of the Metrication Board for 1971.

ERIC Educational Resources Information Center

Metrication Board, London (England).

Great Britain began changing to the metric system in 1965, in order to improve industrial efficiency and to increase its competitive strength in international trade. Despite internal and external pressures calling for acceleration of the rate of change, a loss of momentum in expanding use of metric standards was noted in 1971. In order to…

Metrics. A Basic Core Curriculum for Teaching Metrics to Vocational Students.

ERIC Educational Resources Information Center

Albracht, James; Simmons, A. D.

This core curriculum contains five units for use in teaching metrics to vocational students. Included in the first unit are a series of learning activities to familiarize students with the terminology of metrics, including the prefixes and their values. Measures of distance and speed are covered. Discussed next are measures of volume used with…

Performance Metrics for Liquid Chromatography-Tandem Mass Spectrometry Systems in Proteomics Analyses*

PubMed Central

Rudnick, Paul A.; Clauser, Karl R.; Kilpatrick, Lisa E.; Tchekhovskoi, Dmitrii V.; Neta, Pedatsur; Blonder, Nikša; Billheimer, Dean D.; Blackman, Ronald K.; Bunk, David M.; Cardasis, Helene L.; Ham, Amy-Joan L.; Jaffe, Jacob D.; Kinsinger, Christopher R.; Mesri, Mehdi; Neubert, Thomas A.; Schilling, Birgit; Tabb, David L.; Tegeler, Tony J.; Vega-Montoto, Lorenzo; Variyath, Asokan Mulayath; Wang, Mu; Wang, Pei; Whiteaker, Jeffrey R.; Zimmerman, Lisa J.; Carr, Steven A.; Fisher, Susan J.; Gibson, Bradford W.; Paulovich, Amanda G.; Regnier, Fred E.; Rodriguez, Henry; Spiegelman, Cliff; Tempst, Paul; Liebler, Daniel C.; Stein, Stephen E.

2010-01-01

A major unmet need in LC-MS/MS-based proteomics analyses is a set of tools for quantitative assessment of system performance and evaluation of technical variability. Here we describe 46 system performance metrics for monitoring chromatographic performance, electrospray source stability, MS1 and MS2 signals, dynamic sampling of ions for MS/MS, and peptide identification. Applied to data sets from replicate LC-MS/MS analyses, these metrics displayed consistent, reasonable responses to controlled perturbations. The metrics typically displayed variations less than 10% and thus can reveal even subtle differences in performance of system components. Analyses of data from interlaboratory studies conducted under a common standard operating procedure identified outlier data and provided clues to specific causes. Moreover, interlaboratory variation reflected by the metrics indicates which system components vary the most between laboratories. Application of these metrics enables rational, quantitative quality assessment for proteomics and other LC-MS/MS analytical applications. PMID:19837981

Metrication in a global environment

NASA Technical Reports Server (NTRS)

Aberg, J.

1994-01-01

A brief history about the development of the metric system of measurement is given. The need for the U.S. to implement the 'SI' metric system in the international markets, especially in the aerospace and general trade, is discussed. Development of metric implementation and experiences locally, nationally, and internationally are included.

Metrication, American Style. Fastback 41.

ERIC Educational Resources Information Center

Izzi, John

The purpose of this pamphlet is to provide a starting point of information on the metric system for any concerned or interested reader. The material is organized into five brief chapters: Man and Measurement; Learning the Metric System; Progress Report: Education; Recommended Sources; and Metrication, American Style. Appendixes include an…

Quality Metrics in Neonatal and Pediatric Critical Care Transport: A National Delphi Project.

PubMed

Schwartz, Hamilton P; Bigham, Michael T; Schoettker, Pamela J; Meyer, Keith; Trautman, Michael S; Insoft, Robert M

2015-10-01

The transport of neonatal and pediatric patients to tertiary care facilities for specialized care demands monitoring the quality of care delivered during transport and its impact on patient outcomes. In 2011, pediatric transport teams in Ohio met to identify quality indicators permitting comparisons among programs. However, no set of national consensus quality metrics exists for benchmarking transport teams. The aim of this project was to achieve national consensus on appropriate neonatal and pediatric transport quality metrics. Modified Delphi technique. The first round of consensus determination was via electronic mail survey, followed by rounds of consensus determination in-person at the American Academy of Pediatrics Section on Transport Medicine's 2012 Quality Metrics Summit. All attendees of the American Academy of Pediatrics Section on Transport Medicine Quality Metrics Summit, conducted on October 21-23, 2012, in New Orleans, LA, were eligible to participate. Candidate quality metrics were identified through literature review and those metrics currently tracked by participating programs. Participants were asked in a series of rounds to identify "very important" quality metrics for transport. It was determined a priori that consensus on a metric's importance was achieved when at least 70% of respondents were in agreement. This is consistent with other Delphi studies. Eighty-two candidate metrics were considered initially. Ultimately, 12 metrics achieved consensus as "very important" to transport. These include metrics related to airway management, team mobilization time, patient and crew injuries, and adverse patient care events. Definitions were assigned to the 12 metrics to facilitate uniform data tracking among programs. The authors succeeded in achieving consensus among a diverse group of national transport experts on 12 core neonatal and pediatric transport quality metrics. We propose that transport teams across the country use these metrics to

On Information Metrics for Spatial Coding.

PubMed

Souza, Bryan C; Pavão, Rodrigo; Belchior, Hindiael; Tort, Adriano B L

2018-04-01

The hippocampal formation is involved in navigation, and its neuronal activity exhibits a variety of spatial correlates (e.g., place cells, grid cells). The quantification of the information encoded by spikes has been standard procedure to identify which cells have spatial correlates. For place cells, most of the established metrics derive from Shannon's mutual information (Shannon, 1948), and convey information rate in bits/s or bits/spike (Skaggs et al., 1993, 1996). Despite their widespread use, the performance of these metrics in relation to the original mutual information metric has never been investigated. In this work, using simulated and real data, we find that the current information metrics correlate less with the accuracy of spatial decoding than the original mutual information metric. We also find that the top informative cells may differ among metrics, and show a surrogate-based normalization that yields comparable spatial information estimates. Since different information metrics may identify different neuronal populations, we discuss current and alternative definitions of spatially informative cells, which affect the metric choice. Copyright © 2018 IBRO. Published by Elsevier Ltd. All rights reserved.

A Complexity Metric for Automated Separation

NASA Technical Reports Server (NTRS)

Aweiss, Arwa

2009-01-01

A metric is proposed to characterize airspace complexity with respect to an automated separation assurance function. The Maneuver Option metric is a function of the number of conflict-free trajectory change options the automated separation assurance function is able to identify for each aircraft in the airspace at a given time. By aggregating the metric for all aircraft in a region of airspace, a measure of the instantaneous complexity of the airspace is produced. A six-hour simulation of Fort Worth Center air traffic was conducted to assess the metric. Results showed aircraft were twice as likely to be constrained in the vertical dimension than the horizontal one. By application of this metric, situations found to be most complex were those where level overflights and descending arrivals passed through or merged into an arrival stream. The metric identified high complexity regions that correlate well with current air traffic control operations. The Maneuver Option metric did not correlate with traffic count alone, a result consistent with complexity metrics for human-controlled airspace.

A parallel variable metric optimization algorithm

NASA Technical Reports Server (NTRS)

Straeter, T. A.

1973-01-01

An algorithm, designed to exploit the parallel computing or vector streaming (pipeline) capabilities of computers is presented. When p is the degree of parallelism, then one cycle of the parallel variable metric algorithm is defined as follows: first, the function and its gradient are computed in parallel at p different values of the independent variable; then the metric is modified by p rank-one corrections; and finally, a single univariant minimization is carried out in the Newton-like direction. Several properties of this algorithm are established. The convergence of the iterates to the solution is proved for a quadratic functional on a real separable Hilbert space. For a finite-dimensional space the convergence is in one cycle when p equals the dimension of the space. Results of numerical experiments indicate that the new algorithm will exploit parallel or pipeline computing capabilities to effect faster convergence than serial techniques.

Evaluation Metrics for Simulations of Tropical South America

NASA Astrophysics Data System (ADS)

Gallup, S.; Baker, I. T.; Denning, A. S.; Cheeseman, M.; Haynes, K. D.; Phillips, M.

2017-12-01

The evergreen broadleaf forest of the Amazon Basin is the largest rainforest on earth, and has teleconnections to global climate and carbon cycle characteristics. This region defies simple characterization, spanning large gradients in total rainfall and seasonal variability. Broadly, the region can be thought of as trending from light-limited in its wettest areas to water-limited near the ecotone, with individual landscapes possibly exhibiting the characteristics of either (or both) limitations during an annual cycle. A basin-scale classification of mean behavior has been elusive, and ecosystem response to seasonal cycles and anomalous drought events has resulted in some disagreement in the literature, to say the least. However, new observational platforms and instruments make characterization of the heterogeneity and variability more feasible.To evaluate simulations of ecophysiological function, we develop metrics that correlate various observational products with meteorological variables such as precipitation and radiation. Observations include eddy covariance fluxes, Solar Induced Fluorescence (SIF, from GOME2 and OCO2), biomass and vegetation indices. We find that the modest correlation between SIF and precipitation decreases with increasing annual precipitation, although the relationship is not consistent between products. Biomass increases with increasing precipitation. Although vegetation indices are generally correlated with biomass and precipitation, they can saturate or experience retrieval issues during cloudy periods.Using these observational products and relationships, we develop a set of model evaluation metrics. These metrics are designed to call attention to models that get "the right answer only if it's for the right reason," and provide an opportunity for more critical evaluation of model physics. These metrics represent a testbed that can be applied to multiple models as a means to evaluate their performance in tropical South America.

Elementary Metric Curriculum - Project T.I.M.E. (Timely Implementation of Metric Education). Part I.

ERIC Educational Resources Information Center

Community School District 18, Brooklyn, NY.

This is a teacher's manual for an ISS-based elementary school course in the metric system. Behavioral objectives and student activities are included. The topics covered include: (1) linear measurement; (2) metric-decimal relationships; (3) metric conversions; (4) geometry; (5) scale drawings; and (6) capacity. This is the first of a two-part…

14 CFR 1274.206 - Metric Conversion Act.

Code of Federal Regulations, 2012 CFR

2012-01-01

... metric measurement system is stated in NPD 8010.2, Use of the Metric System of Measurement in NASA... 14 Aeronautics and Space 5 2012-01-01 2012-01-01 false Metric Conversion Act. 1274.206 Section... WITH COMMERCIAL FIRMS Pre-Award Requirements § 1274.206 Metric Conversion Act. The Metric Conversion...

14 CFR 1274.206 - Metric Conversion Act.

Code of Federal Regulations, 2013 CFR

2013-01-01

... metric measurement system is stated in NPD 8010.2, Use of the Metric System of Measurement in NASA... 14 Aeronautics and Space 5 2013-01-01 2013-01-01 false Metric Conversion Act. 1274.206 Section... WITH COMMERCIAL FIRMS Pre-Award Requirements § 1274.206 Metric Conversion Act. The Metric Conversion...

Non-metric multidimensional performance indicator scaling reveals seasonal and team dissimilarity within the National Rugby League.

PubMed

Woods, Carl T; Robertson, Sam; Sinclair, Wade H; Collier, Neil French

2018-04-01

Analysing the dissimilarity of seasonal and team profiles within elite sport may reveal the evolutionary dynamics of game-play, while highlighting the similarity of individual team profiles. This study analysed seasonal and team dissimilarity within the National Rugby League (NRL) between the 2005 to 2016 seasons. Longitudinal. Total seasonal values for 15 performance indicators were collected for every NRL team over the analysed period (n=190 observations). Non-metric multidimensional scaling was used to reveal seasonal and team dissimilarity. Compared to the 2005 to 2011 seasons, the 2012 to 2016 seasons were in a state of flux, with a relative dissimilarity in the positioning of team profiles on the ordination surface. There was an abrupt change in performance indicator characteristics following the 2012 season, with the 2014 season reflecting a large increase in the total count of 'all run metres' (d=1.21; 90% CI=0.56-1.83), 'kick return metres' (d=2.99; 90% CI=2.12-3.84) and decrease in 'missed tackles' (d=-2.43; 90% CI=-3.19 to -1.64) and 'tackle breaks' (d=-2.41; 90% CI=-3.17 to -1.62). Interpretation of team ordination plots showed that certain teams evolved in (dis)similar ways over the analysed period. It appears that NRL match-types evolved following the 2012 season and are in a current state of flux. The modification of coaching tactics and rule changes may have contributed to these observations. Coaches could use these results when designing prospective game strategies in the NRL. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

WE-H-BRC-05: Catastrophic Error Metrics for Radiation Therapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Murphy, S; Molloy, J

Purpose: Intuitive evaluation of complex radiotherapy treatments is impractical, while data transfer anomalies create the potential for catastrophic treatment delivery errors. Contrary to prevailing wisdom, logical scrutiny can be applied to patient-specific machine settings. Such tests can be automated, applied at the point of treatment delivery and can be dissociated from prior states of the treatment plan, potentially revealing errors introduced early in the process. Methods: Analytical metrics were formulated for conventional and intensity modulated RT (IMRT) treatments. These were designed to assess consistency between monitor unit settings, wedge values, prescription dose and leaf positioning (IMRT). Institutional metric averages formore » 218 clinical plans were stratified over multiple anatomical sites. Treatment delivery errors were simulated using a commercial treatment planning system and metric behavior assessed via receiver-operator-characteristic (ROC) analysis. A positive result was returned if the erred plan metric value exceeded a given number of standard deviations, e.g. 2. The finding was declared true positive if the dosimetric impact exceeded 25%. ROC curves were generated over a range of metric standard deviations. Results: Data for the conventional treatment metric indicated standard deviations of 3%, 12%, 11%, 8%, and 5 % for brain, pelvis, abdomen, lung and breast sites, respectively. Optimum error declaration thresholds yielded true positive rates (TPR) between 0.7 and 1, and false positive rates (FPR) between 0 and 0.2. Two proposed IMRT metrics possessed standard deviations of 23% and 37%. The superior metric returned TPR and FPR of 0.7 and 0.2, respectively, when both leaf position and MUs were modelled. Isolation to only leaf position errors yielded TPR and FPR values of 0.9 and 0.1. Conclusion: Logical tests can reveal treatment delivery errors and prevent large, catastrophic errors. Analytical metrics are able to identify errors in

Exploring the state of health and safety management system performance measurement in mining organizations

PubMed Central

Haas, Emily Joy; Yorio, Patrick

2016-01-01

Complex arguments continue to be articulated regarding the theoretical foundation of health and safety management system (HSMS) performance measurement. The culmination of these efforts has begun to enhance a collective understanding. Despite this enhanced theoretical understanding, however, there are still continuing debates and little consensus. The goal of the current research effort was to empirically explore common methods to HSMS performance measurement in mining organizations. The purpose was to determine if value and insight could be added into the ongoing approaches of the best ways to engage in health and safety performance measurement. Nine site-level health and safety management professionals were provided with 133 practices corresponding to 20 HSMS elements, each fitting into the plan, do, check, act phases common to most HSMS. Participants were asked to supply detailed information as to how they (1) assess the performance of each practice in their organization, or (2) would assess each practice if it were an identified strategic imperative. Qualitative content analysis indicated that the approximately 1200 responses provided could be described and categorized into interventions, organizational performance, and worker performance. A discussion of how these categories relate to existing indicator frameworks is provided. The analysis also revealed divergence in two important measurement issues; (1) quantitative vs qualitative measurement and reporting; and (2) the primary use of objective or subjective metrics. In lieu of these findings we ultimately recommend a balanced measurement and reporting approach within the three metric categories and conclude with suggestions for future research. PMID:26823642

Fundamentals of quality and safety in diagnostic radiology.

PubMed

Bruno, Michael A; Nagy, Paul

2014-12-01

The most fundamental aspects of quality and safety in radiology are reviewed, including a brief history of the quality and safety movement as applied to radiology, the overarching considerations of organizational culture, team building, choosing appropriate goals and metrics, and the radiologist's quality "tool kit." Copyright © 2014 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Analysis of Network Clustering Algorithms and Cluster Quality Metrics at Scale.

PubMed

Emmons, Scott; Kobourov, Stephen; Gallant, Mike; Börner, Katy

2016-01-01

Notions of community quality underlie the clustering of networks. While studies surrounding network clustering are increasingly common, a precise understanding of the realtionship between different cluster quality metrics is unknown. In this paper, we examine the relationship between stand-alone cluster quality metrics and information recovery metrics through a rigorous analysis of four widely-used network clustering algorithms-Louvain, Infomap, label propagation, and smart local moving. We consider the stand-alone quality metrics of modularity, conductance, and coverage, and we consider the information recovery metrics of adjusted Rand score, normalized mutual information, and a variant of normalized mutual information used in previous work. Our study includes both synthetic graphs and empirical data sets of sizes varying from 1,000 to 1,000,000 nodes. We find significant differences among the results of the different cluster quality metrics. For example, clustering algorithms can return a value of 0.4 out of 1 on modularity but score 0 out of 1 on information recovery. We find conductance, though imperfect, to be the stand-alone quality metric that best indicates performance on the information recovery metrics. Additionally, our study shows that the variant of normalized mutual information used in previous work cannot be assumed to differ only slightly from traditional normalized mutual information. Smart local moving is the overall best performing algorithm in our study, but discrepancies between cluster evaluation metrics prevent us from declaring it an absolutely superior algorithm. Interestingly, Louvain performed better than Infomap in nearly all the tests in our study, contradicting the results of previous work in which Infomap was superior to Louvain. We find that although label propagation performs poorly when clusters are less clearly defined, it scales efficiently and accurately to large graphs with well-defined clusters.

Comparison of macroinvertebrate-derived stream quality metrics between snag and riffle habitats

USGS Publications Warehouse

Stepenuck, K.F.; Crunkilton, R.L.; Bozek, Michael A.; Wang, L.

2008-01-01

We compared benthic macroinvertebrate assemblage structure at snag and riffle habitats in 43 Wisconsin streams across a range of watershed urbanization using a variety of stream quality metrics. Discriminant analysis indicated that dominant taxa at riffles and snags differed; Hydropsychid caddisflies (Hydropsyche betteni and Cheumatopsyche spp.) and elmid beetles (Optioservus spp. and Stenemlis spp.) typified riffles, whereas isopods (Asellus intermedius) and amphipods (Hyalella azteca and Gammarus pseudolimnaeus) predominated in snags. Analysis of covariance indicated that samples from snag and riffle habitats differed significantly in their response to the urbanization gradient for the Hilsenhoff biotic index (BI), Shannon's diversity index, and percent of filterers, shredders, and pollution intolerant Ephemeroptera, Plecoptera, and Trichoptera (EPT) at each stream site (p ??? 0.10). These differences suggest that although macroinvertebrate assemblages present in either habitat type are sensitive to detecting the effects of urbanization, metrics derived from different habitats should not be intermixed when assessing stream quality through biomonitoring. This can be a limitation to resource managers who wish to compare water quality among streams where the same habitat type is not available at all stream locations, or where a specific habitat type (i.e., a riffle) is required to determine a metric value (i.e., BI). To account for differences in stream quality at sites lacking riffle habitat, snag-derived metric values can be adjusted based on those obtained from riffles that have been exposed to the same level of urbanization. Comparison of nonlinear regression equations that related stream quality metric values from the two habitat types to percent watershed urbanization indicated that snag habitats had on average 30.2 fewer percent EPT individuals, a lower diversity index value than riffles, and a BI value of 0.29 greater than riffles. ?? 2008 American Water

Designing Industrial Networks Using Ecological Food Web Metrics.

PubMed

Layton, Astrid; Bras, Bert; Weissburg, Marc

2016-10-18

Biologically Inspired Design (biomimicry) and Industrial Ecology both look to natural systems to enhance the sustainability and performance of engineered products, systems and industries. Bioinspired design (BID) traditionally has focused on a unit operation and single product level. In contrast, this paper describes how principles of network organization derived from analysis of ecosystem properties can be applied to industrial system networks. Specifically, this paper examines the applicability of particular food web matrix properties as design rules for economically and biologically sustainable industrial networks, using an optimization model developed for a carpet recycling network. Carpet recycling network designs based on traditional cost and emissions based optimization are compared to designs obtained using optimizations based solely on ecological food web metrics. The analysis suggests that networks optimized using food web metrics also were superior from a traditional cost and emissions perspective; correlations between optimization using ecological metrics and traditional optimization ranged generally from 0.70 to 0.96, with flow-based metrics being superior to structural parameters. Four structural food parameters provided correlations nearly the same as that obtained using all structural parameters, but individual structural parameters provided much less satisfactory correlations. The analysis indicates that bioinspired design principles from ecosystems can lead to both environmentally and economically sustainable industrial resource networks, and represent guidelines for designing sustainable industry networks.

Converting Residential Drawing Courses to Metric.

ERIC Educational Resources Information Center

Goetsch, David L.

1980-01-01

Describes the process of metric conversion in residential drafting courses. Areas of concern are metric paper sizes; metric scale; plot, foundation, floor and electric plans; wall sections; elevations; and heat loss/ heat gain calculations. (SK)

Evaluating the impact of bike network indicators on cyclist safety using macro-level collision prediction models.

PubMed

Osama, Ahmed; Sayed, Tarek

2016-12-01

Many cities worldwide are recognizing the important role that cycling plays in creating green and livable communities. However, vulnerable road users such as cyclists are usually subjected to an elevated level of injury risk which discourages many road users to cycle. This paper studies cyclist-vehicle collisions at 134 traffic analysis zones in the city of Vancouver to assess the impact of bike network structure on cyclist safety. Several network indicators were developed using Graph theory and their effect on cyclist safety was investigated. The indicators included measures of connectivity, directness, and topography of the bike network. The study developed several macro-level (zonal) collision prediction models that explicitly incorporated bike network indicators as explanatory variables. As well, the models incorporated the actual cyclist exposure (bike kilometers travelled) as opposed to relying on proxies such as population or bike network length. The macro-level collision prediction models were developed using generalized linear regression and full Bayesian techniques, with and without spatial effects. The models showed that cyclist collisions were positively associated with bike and vehicle exposure. The exponents of the exposure variables were less than one which supports the "safety in numbers" hypothesis. Moreover, the models showed positive associations between cyclist collisions and the bike network connectivity and linearity indicators. In contrast, negative associations were found between cyclist collisions and the bike network continuity and topography indicators. The spatial effects were statistically significant in all of the developed models. Copyright © 2016 Elsevier Ltd. All rights reserved.

Engineering performance metrics

NASA Astrophysics Data System (ADS)

Delozier, R.; Snyder, N.

1993-03-01

Implementation of a Total Quality Management (TQM) approach to engineering work required the development of a system of metrics which would serve as a meaningful management tool for evaluating effectiveness in accomplishing project objectives and in achieving improved customer satisfaction. A team effort was chartered with the goal of developing a system of engineering performance metrics which would measure customer satisfaction, quality, cost effectiveness, and timeliness. The approach to developing this system involved normal systems design phases including, conceptual design, detailed design, implementation, and integration. The lessons teamed from this effort will be explored in this paper. These lessons learned may provide a starting point for other large engineering organizations seeking to institute a performance measurement system accomplishing project objectives and in achieving improved customer satisfaction. To facilitate this effort, a team was chartered to assist in the development of the metrics system. This team, consisting of customers and Engineering staff members, was utilized to ensure that the needs and views of the customers were considered in the development of performance measurements. The development of a system of metrics is no different than the development of any type of system. It includes the steps of defining performance measurement requirements, measurement process conceptual design, performance measurement and reporting system detailed design, and system implementation and integration.

48 CFR 611.002-70 - Metric system implementation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... information or comparison. Hard metric means the use of only standard metric (SI) measurements in specifications, standards, supplies and services. Hybrid system means the use of both traditional and hard metric... possible. Alternatives to hard metric are soft, dual and hybrid metric terms. The Metric Handbook for...

Toward a perceptual video-quality metric

NASA Astrophysics Data System (ADS)

Watson, Andrew B.

1998-07-01

The advent of widespread distribution of digital video creates a need for automated methods for evaluating the visual quality of digital video. This is particularly so since most digital video is compressed using lossy methods, which involve the controlled introduction of potentially visible artifacts. Compounding the problem is the bursty nature of digital video, which requires adaptive bit allocation based on visual quality metrics, and the economic need to reduce bit-rate to the lowest level that yields acceptable quality. In previous work, we have developed visual quality metrics for evaluating, controlling,a nd optimizing the quality of compressed still images. These metrics incorporate simplified models of human visual sensitivity to spatial and chromatic visual signals. Here I describe a new video quality metric that is an extension of these still image metrics into the time domain. Like the still image metrics, it is based on the Discrete Cosine Transform. An effort has been made to minimize the amount of memory and computation required by the metric, in order that might be applied in the widest range of applications. To calibrate the basic sensitivity of this metric to spatial and temporal signals we have made measurements of visual thresholds for temporally varying samples of DCT quantization noise.

Vowel Harmony in Palestinian Arabic: A Metrical Perspective.

ERIC Educational Resources Information Center

Abu-Salim, I. M.

1987-01-01

The autosegmental rule of vowel harmony (VH) in Palestinian Arabic is shown to be constrained simultaneously by metrical and segmental boundaries. The indicative prefix bi- is no longer an exception to VH if a structure is assumed that disallows the prefix from sharing a foot with the stem, consequently blocking VH. (Author/LMO)

A Sensor-Independent Gust Hazard Metric

NASA Technical Reports Server (NTRS)

Stewart, Eric C.

2001-01-01

A procedure for calculating an intuitive hazard metric for gust effects on airplanes is described. The hazard metric is for use by pilots and is intended to replace subjective pilot reports (PIREPs) of the turbulence level. The hazard metric is composed of three numbers: the first describes the average airplane response to the turbulence, the second describes the positive peak airplane response to the gusts, and the third describes the negative peak airplane response to the gusts. The hazard metric is derived from any time history of vertical gust measurements and is thus independent of the sensor making the gust measurements. The metric is demonstrated for one simulated airplane encountering different types of gusts including those derived from flight data recorder measurements of actual accidents. The simulated airplane responses to the gusts compare favorably with the hazard metric.

Distance Metric Tracking

DTIC Science & Technology

2016-03-02

some close- ness constant and dissimilar pairs be more distant than some larger constant. Online and non -linear extensions to the ITML methodology are...is obtained, instead of solving an objective function formed from the entire dataset. Many online learning methods have regret guarantees, that is... function Metric learning seeks to learn a metric that encourages data points marked as similar to be close and data points marked as different to be far

Patterns of Hospital Performance on the Hospital-Wide 30-Day Readmission Metric: Is the Playing Field Level?

PubMed

Hoyer, Erik H; Padula, William V; Brotman, Daniel J; Reid, Natalie; Leung, Curtis; Lepley, Diane; Deutschendorf, Amy

2018-01-01

Hospital performance on the 30-day hospital-wide readmission (HWR) metric as calculated by the Centers for Medicare and Medicaid Services (CMS) is currently reported as a quality measure. Focusing on patient-level factors may provide an incomplete picture of readmission risk at the hospital level to explain variations in hospital readmission rates. To evaluate and quantify hospital-level characteristics that track with hospital performance on the current HWR metric. Retrospective cohort study. A total of 4785 US hospitals. We linked publically available data on individual hospitals published by CMS on patient-level adjusted 30-day HWR rates from July 1, 2011, through June 30, 2014, to the 2014 American Hospital Association annual survey. Primary outcome was performance in the worst CMS-calculated HWR quartile. Primary hospital-level exposure variables were defined as: size (total number of beds), safety net status (top quartile of disproportionate share), academic status [member of the Association of American Medical Colleges (AAMC)], National Cancer Institute Comprehensive Cancer Center (NCI-CCC) status, and hospital services offered (e.g., transplant, hospice, emergency department). Multilevel regression was used to evaluate the association between 30-day HWR and the hospital-level factors. Hospital-level characteristics significantly associated with performing in the worst CMS-calculated HWR quartile included: safety net status [adjusted odds ratio (aOR) 1.99, 95% confidence interval (95% CI) 1.61-2.45, p < 0.001], large size (> 400 beds, aOR 1.42, 95% CI 1.07-1.90, p = 0.016), AAMC alone status (aOR 1.95, 95% CI 1.35-2.83, p < 0.001), and AAMC plus NCI-CCC status (aOR 5.16, 95% CI 2.58-10.31, p < 0.001). Hospitals with more critical care beds (aOR 1.26, 95% CI 1.02-1.56, p = 0.033), those with transplant services (aOR 2.80, 95% CI 1.48-5.31,p = 0.001), and those with emergency room services (aOR 3.37, 95% CI 1.12-10.15, p = 0.031) demonstrated

Study of the Ernst metric

DOE Office of Scientific and Technical Information (OSTI.GOV)

Esteban, E.P.

In this thesis some properties of the Ernst metric are studied. This metric could provide a model for a Schwarzschild black hole immersed in a magnetic field. In chapter I, some standard propertiess of the Ernst's metric such as the affine connections, the Riemann, the Ricci, and the Weyl conformal tensor are calculated. In chapter II, the geodesics described by test particles in the Ernst space-time are studied. As an application a formula for the perihelion shift is derived. In the last chapter a null tetrad analysis of the Ernst metric is carried out and the resulting formalism applied tomore » the study of three problems. First, the algebraic classification of the Ernst metric is determined to be of type I in the Petrov scheme. Secondly, an explicit formula for the Gaussian curvature for the event horizon is derived. Finally, the form of the electromagnetic field is evaluated.« less

How Soon Will We Measure in Metric?

ERIC Educational Resources Information Center

Weaver, Kenneth F.

1977-01-01

A brief history of measurement systems beginning with the Egyptians and Babylonians is given, ending with a discussion of the metric system and its adoption by the United States. Tables of metric prefixes, metric units, and common metric conversions are included. (MN)

Problem formulation, metrics, open government, and on-line collaboration

NASA Astrophysics Data System (ADS)

Ziegler, C. R.; Schofield, K.; Young, S.; Shaw, D.

2010-12-01

Problem formulation leading to effective environmental management, including synthesis and application of science by government agencies, may benefit from collaborative on-line environments. This is illustrated by two interconnected projects: 1) literature-based evidence tools that support causal assessment and problem formulation, and 2) development of output, outcome, and sustainability metrics for tracking environmental conditions. Specifically, peer-production mechanisms allow for global contribution to science-based causal evidence databases, and subsequent crowd-sourced development of causal networks supported by that evidence. In turn, science-based causal networks may inform problem formulation and selection of metrics or indicators to track environmental condition (or problem status). Selecting and developing metrics in a collaborative on-line environment may improve stakeholder buy-in, the explicit relevance of metrics to planning, and the ability to approach problem apportionment or accountability, and to define success or sustainability. Challenges include contribution governance, data-sharing incentives, linking on-line interfaces to data service providers, and the intersection of environmental science and social science. Degree of framework access and confidentiality may vary by group and/or individual, but may ultimately be geared at demonstrating connections between science and decision making and supporting a culture of open government, by fostering transparency, public engagement, and collaboration.

Safety Analysis and Industry Impacts of the Pre-Employment Screening Program (PSP)

DOT National Transportation Integrated Search

2013-10-01

In this report, FMCSA analyzes the safety impacts of the Pre-Employment Screening Program (PSP) and presents metrics and anecdotal information on attitudes of carriers using PSP. The safety impacts are examined by comparing the crash rates and driver...

Texture metric that predicts target detection performance

NASA Astrophysics Data System (ADS)

Culpepper, Joanne B.

2015-12-01

Two texture metrics based on gray level co-occurrence error (GLCE) are used to predict probability of detection and mean search time. The two texture metrics are local clutter metrics and are based on the statistics of GLCE probability distributions. The degree of correlation between various clutter metrics and the target detection performance of the nine military vehicles in complex natural scenes found in the Search_2 dataset are presented. Comparison is also made between four other common clutter metrics found in the literature: root sum of squares, Doyle, statistical variance, and target structure similarity. The experimental results show that the GLCE energy metric is a better predictor of target detection performance when searching for targets in natural scenes than the other clutter metrics studied.

Testing, Requirements, and Metrics

NASA Technical Reports Server (NTRS)

Rosenberg, Linda; Hyatt, Larry; Hammer, Theodore F.; Huffman, Lenore; Wilson, William

1998-01-01

The criticality of correct, complete, testable requirements is a fundamental tenet of software engineering. Also critical is complete requirements based testing of the final product. Modern tools for managing requirements allow new metrics to be used in support of both of these critical processes. Using these tools, potential problems with the quality of the requirements and the test plan can be identified early in the life cycle. Some of these quality factors include: ambiguous or incomplete requirements, poorly designed requirements databases, excessive or insufficient test cases, and incomplete linkage of tests to requirements. This paper discusses how metrics can be used to evaluate the quality of the requirements and test to avoid problems later. Requirements management and requirements based testing have always been critical in the implementation of high quality software systems. Recently, automated tools have become available to support requirements management. At NASA's Goddard Space Flight Center (GSFC), automated requirements management tools are being used on several large projects. The use of these tools opens the door to innovative uses of metrics in characterizing test plan quality and assessing overall testing risks. In support of these projects, the Software Assurance Technology Center (SATC) is working to develop and apply a metrics program that utilizes the information now available through the application of requirements management tools. Metrics based on this information provides real-time insight into the testing of requirements and these metrics assist the Project Quality Office in its testing oversight role. This paper discusses three facets of the SATC's efforts to evaluate the quality of the requirements and test plan early in the life cycle, thus preventing costly errors and time delays later.

Fighter agility metrics, research, and test

NASA Technical Reports Server (NTRS)

Liefer, Randall K.; Valasek, John; Eggold, David P.

1990-01-01

Proposed new metrics to assess fighter aircraft agility are collected and analyzed. A framework for classification of these new agility metrics is developed and applied. A completed set of transient agility metrics is evaluated with a high fidelity, nonlinear F-18 simulation provided by the NASA Dryden Flight Research Center. Test techniques and data reduction methods are proposed. A method of providing cuing information to the pilot during flight test is discussed. The sensitivity of longitudinal and lateral agility metrics to deviations from the pilot cues is studied in detail. The metrics are shown to be largely insensitive to reasonable deviations from the nominal test pilot commands. Instrumentation required to quantify agility via flight test is also considered. With one exception, each of the proposed new metrics may be measured with instrumentation currently available. Simulation documentation and user instructions are provided in an appendix.

Neural decoding with kernel-based metric learning.

PubMed

Brockmeier, Austin J; Choi, John S; Kriminger, Evan G; Francis, Joseph T; Principe, Jose C

2014-06-01

In studies of the nervous system, the choice of metric for the neural responses is a pivotal assumption. For instance, a well-suited distance metric enables us to gauge the similarity of neural responses to various stimuli and assess the variability of responses to a repeated stimulus-exploratory steps in understanding how the stimuli are encoded neurally. Here we introduce an approach where the metric is tuned for a particular neural decoding task. Neural spike train metrics have been used to quantify the information content carried by the timing of action potentials. While a number of metrics for individual neurons exist, a method to optimally combine single-neuron metrics into multineuron, or population-based, metrics is lacking. We pose the problem of optimizing multineuron metrics and other metrics using centered alignment, a kernel-based dependence measure. The approach is demonstrated on invasively recorded neural data consisting of both spike trains and local field potentials. The experimental paradigm consists of decoding the location of tactile stimulation on the forepaws of anesthetized rats. We show that the optimized metrics highlight the distinguishing dimensions of the neural response, significantly increase the decoding accuracy, and improve nonlinear dimensionality reduction methods for exploratory neural analysis.

Dynamic allocation of attention to metrical and grouping accents in rhythmic sequences.

PubMed

Kung, Shu-Jen; Tzeng, Ovid J L; Hung, Daisy L; Wu, Denise H

2011-04-01

Most people find it easy to perform rhythmic movements in synchrony with music, which reflects their ability to perceive the temporal periodicity and to allocate attention in time accordingly. Musicians and non-musicians were tested in a click localization paradigm in order to investigate how grouping and metrical accents in metrical rhythms influence attention allocation, and to reveal the effect of musical expertise on such processing. We performed two experiments in which the participants were required to listen to isochronous metrical rhythms containing superimposed clicks and then to localize the click on graphical and ruler-like representations with and without grouping structure information, respectively. Both experiments revealed metrical and grouping influences on click localization. Musical expertise improved the precision of click localization, especially when the click coincided with a metrically strong beat. Critically, although all participants located the click accurately at the beginning of an intensity group, only musicians located it precisely when it coincided with a strong beat at the end of the group. Removal of the visual cue of grouping structures enhanced these effects in musicians and reduced them in non-musicians. These results indicate that musical expertise not only enhances attention to metrical accents but also heightens sensitivity to perceptual grouping.

Joint learning of labels and distance metric.

PubMed

Liu, Bo; Wang, Meng; Hong, Richang; Zha, Zhengjun; Hua, Xian-Sheng

2010-06-01

Machine learning algorithms frequently suffer from the insufficiency of training data and the usage of inappropriate distance metric. In this paper, we propose a joint learning of labels and distance metric (JLLDM) approach, which is able to simultaneously address the two difficulties. In comparison with the existing semi-supervised learning and distance metric learning methods that focus only on label prediction or distance metric construction, the JLLDM algorithm optimizes the labels of unlabeled samples and a Mahalanobis distance metric in a unified scheme. The advantage of JLLDM is multifold: 1) the problem of training data insufficiency can be tackled; 2) a good distance metric can be constructed with only very few training samples; and 3) no radius parameter is needed since the algorithm automatically determines the scale of the metric. Extensive experiments are conducted to compare the JLLDM approach with different semi-supervised learning and distance metric learning methods, and empirical results demonstrate its effectiveness.

Can patient safety indicators monitor medical and surgical care at New Zealand public hospitals?

PubMed

Hider, Phil; Parker, Karl; von Randow, Martin; Milne, Barry; Lay-Yee, Roy; Davis, Peter

2014-11-07

Increasing interest has focused on the safety of hospital care. The AusPSIs are a set of indicators developed from Australian administrative data to reliably identify inpatient adverse events in hospitals. The main aim of this study was to explore the application of the AHRQ/AusPSIs to New Zealand administrative hospital data related to medical and surgical care. Variation over time and across hospitals were also considered for a subset of the more common indicators. AHRQ/AusPSIs were adapted for use with New Zealand National Minimum Dataset administrative data for the period 2001-9. Crude positive event rates for each of the 16 indicators were assessed across New Zealand public hospitals. Variation over time for six more common indicators is presented using statistical control charts. Variation between hospitals was explored using rates adjusted for differences in patient variables including age, sex, ethnicity, rurality of residence, NZDep score and comorbidities. The AHRQ/AusPSIs were applied to New Zealand administrative hospital data and some 99,366 admissions were associated with a positive indicator event. However rates for some indicators were low (<1% of denominator admissions). Over the study period considerable variation in the rate of positive events was evident for the six most common indicators. Likewise there was substantial variation between hospitals in relation to risk adjusted positive event rates Patient safety indicators can be applied to New Zealand administrative hospital data. While infrequent rates hinder the use of some of the indicators, several could now be readily employed as warning flags to help monitor rates of adverse events at particular hospitals. In conjunction with other established or emerging tools, such as audit and trigger tools, the PSIs are now available to promote ongoing quality improvement activities in New Zealand hospitals.

Comparison of continuous versus categorical tumor measurement-based metrics to predict overall survival in cancer treatment trials

PubMed Central

An, Ming-Wen; Mandrekar, Sumithra J.; Branda, Megan E.; Hillman, Shauna L.; Adjei, Alex A.; Pitot, Henry; Goldberg, Richard M.; Sargent, Daniel J.

2011-01-01

Purpose The categorical definition of response assessed via the Response Evaluation Criteria in Solid Tumors has documented limitations. We sought to identify alternative metrics for tumor response that improve prediction of overall survival. Experimental Design Individual patient data from three North Central Cancer Treatment Group trials (N0026, n=117; N9741, n=1109; N9841, n=332) were used. Continuous metrics of tumor size based on longitudinal tumor measurements were considered in addition to a trichotomized response (TriTR: Response vs. Stable vs. Progression). Cox proportional hazards models, adjusted for treatment arm and baseline tumor burden, were used to assess the impact of the metrics on subsequent overall survival, using a landmark analysis approach at 12-, 16- and 24-weeks post baseline. Model discrimination was evaluated using the concordance (c) index. Results The overall best response rates for the three trials were 26%, 45%, and 25% respectively. While nearly all metrics were statistically significantly associated with overall survival at the different landmark time points, the c-indices for the traditional response metrics ranged from 0.59-0.65; for the continuous metrics from 0.60-0.66 and for the TriTR metrics from 0.64-0.69. The c-indices for TriTR at 12-weeks were comparable to those at 16- and 24-weeks. Conclusions Continuous tumor-measurement-based metrics provided no predictive improvement over traditional response based metrics or TriTR; TriTR had better predictive ability than best TriTR or confirmed response. If confirmed, TriTR represents a promising endpoint for future Phase II trials. PMID:21880789

Social Media Metrics and Bibliometric Profiles of Neurosurgical Departments and Journals: Is There a Relationship?

PubMed

Alotaibi, Naif M; Guha, Daipayan; Fallah, Aria; Aldakkan, Abdulrahman; Nassiri, Farshad; Badhiwala, Jetan H; Ibrahim, George M; Shamji, Mohammed F; Macdonald, R Loch; Lozano, Andres M

2016-06-01

Social media plays an increasingly important role in dissemination of knowledge and raising awareness of selected topics among the general public and the academic community. To investigate the relationship between social media metrics and academic indices of neurosurgical programs and journals. A 2-step online search was performed to identify official social media accounts of neurosurgical departments that were accredited by the Accreditation Council for Graduate Medical Education and the Royal College of Physicians and Surgeons of Canada. Dedicated neurosurgery and spine journals' social media accounts also were identified through an online search on SCImago Journal and Country Rank portal. Nonparametric tests were performed with bootstrapping to compare groups and to look for correlations between social media and academic metrics. We identified 36 social media accounts officially affiliated with academic neurosurgical institutions. These accounts represented 22 of 119 neurosurgical programs in North America (18.4%). The presence of a social media account for neurosurgical departments was associated with statistically significant higher values of academic impact metrics (P < 0.05). Specific social media metrics for neurosurgical department accounts, however, did not correlate with any values of academic indices. For journals, there were 11 journals present on social media and had greater academic metrics compared with journals without social media presence (P < 0.05). Social media presence is associated with stronger academic bibliometrics profiles for both neurosurgical departments and journals. The impact of social media metrics on indices of scientific impact in neurosurgery is not known. Copyright © 2016 Elsevier Inc. All rights reserved.

GPS Metric Tracking Unit

NASA Technical Reports Server (NTRS)

2008-01-01

As Global Positioning Satellite (GPS) applications become more prevalent for land- and air-based vehicles, GPS applications for space vehicles will also increase. The Applied Technology Directorate of Kennedy Space Center (KSC) has developed a lightweight, low-cost GPS Metric Tracking Unit (GMTU), the first of two steps in developing a lightweight, low-cost Space-Based Tracking and Command Subsystem (STACS) designed to meet Range Safety's link margin and latency requirements for vehicle command and telemetry data. The goals of STACS are to improve Range Safety operations and expand tracking capabilities for space vehicles. STACS will track the vehicle, receive commands, and send telemetry data through the space-based asset, which will dramatically reduce dependence on ground-based assets. The other step was the Low-Cost Tracking and Data Relay Satellite System (TDRSS) Transceiver (LCT2), developed by the Wallops Flight Facility (WFF), which allows the vehicle to communicate with a geosynchronous relay satellite. Although the GMTU and LCT2 were independently implemented and tested, the design collaboration of KSC and WFF engineers allowed GMTU and LCT2 to be integrated into one enclosure, leading to the final STACS. In operation, GMTU needs only a radio frequency (RF) input from a GPS antenna and outputs position and velocity data to the vehicle through a serial or pulse code modulation (PCM) interface. GMTU includes one commercial GPS receiver board and a custom board, the Command and Telemetry Processor (CTP) developed by KSC. The CTP design is based on a field-programmable gate array (FPGA) with embedded processors to support GPS functions.

Metrics for Food Distribution.

ERIC Educational Resources Information Center

Cooper, Gloria S., Ed.; Magisos, Joel H., Ed.

Designed to meet the job-related metric measurement needs of students interested in food distribution, this instructional package is one of five for the marketing and distribution cluster, part of a set of 55 packages for metric instruction in different occupations. The package is intended for students who already know the occupational…

Arbitrary Metrics in Psychology

ERIC Educational Resources Information Center

Blanton, Hart; Jaccard, James

2006-01-01

Many psychological tests have arbitrary metrics but are appropriate for testing psychological theories. Metric arbitrariness is a concern, however, when researchers wish to draw inferences about the true, absolute standing of a group or individual on the latent psychological dimension being measured. The authors illustrate this in the context of 2…

Metrics for Recreation & Tourism.

ERIC Educational Resources Information Center

Cooper, Gloria S., Ed.; Magisos, Joel H., Ed.

Designed to meet the job-related metric measurement needs of recreation and tourism students, this instructional package is one of three for the hospitality and recreation occupations cluster, part of a set of 55 packages for metric instruction in different occupations. The package is intended for students who already know the occupational…

Metrics for Food Services.

ERIC Educational Resources Information Center

Cooper, Gloria S., Ed.; Magisos, Joel H., Ed.

Designed to meet the job-related metric measurement needs of food services students, this instructional package is one of three for the hospitality and recreation occupations cluster, part of a set of 55 packages for metric instruction in different occupations. The package is intended for students who already know the occupational terminology,…

Metric. Career Education Program.

ERIC Educational Resources Information Center

Salem City Schools, NJ.

This is a compilation of instructional materials to assist teachers and students in learning about the metric system. Contents are organized into four color-coded sections containing the following: (1) background and reference materials for the teacher, including a list of available media and a conversion chart; (2) metric activities for primary…

MO-A-16A-01: QA Procedures and Metrics: In Search of QA Usability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sathiaseelan, V; Thomadsen, B

Radiation therapy has undergone considerable changes in the past two decades with a surge of new technology and treatment delivery methods. The complexity of radiation therapy treatments has increased and there has been increased awareness and publicity about the associated risks. In response, there has been proliferation of guidelines for medical physicists to adopt to ensure that treatments are delivered safely. Task Group recommendations are copious, and clinical physicists' hours are longer, stretched to various degrees between site planning and management, IT support, physics QA, and treatment planning responsibilities.Radiation oncology has many quality control practices in place to ensure themore » delivery of high-quality, safe treatments. Incident reporting systems have been developed to collect statistics about near miss events at many radiation oncology centers. However, tools are lacking to assess the impact of these various control measures. A recent effort to address this shortcoming is the work of Ford et al (2012) who recently published a methodology enumerating quality control quantification for measuring the effectiveness of safety barriers. Over 4000 near-miss incidents reported from 2 academic radiation oncology clinics were analyzed using quality control quantification, and a profile of the most effective quality control measures (metrics) was identified.There is a critical need to identify a QA metric to help the busy clinical physicists to focus their limited time and resources most effectively in order to minimize or eliminate errors in the radiation treatment delivery processes. In this symposium the usefulness of workflows and QA metrics to assure safe and high quality patient care will be explored.Two presentations will be given:Quality Metrics and Risk Management with High Risk Radiation Oncology ProceduresStrategies and metrics for quality management in the TG-100 Era Learning Objectives: Provide an overview and the need for QA

Implementing the Metric System in Personal and Public Service Occupations. Metric Implementation Guide.

ERIC Educational Resources Information Center

Banks, Wilson P.; And Others

Addressed to the personal and public service occupations teacher, this guide is intended to provide appropriate information, viewpoints, and attitudes regarding the metric system and to make suggestions regarding presentation of the material in the classroom. An introductory section on teaching suggestions emphasizes the need for a "think metric"…

Metric Education. Interpretive Report No. 1.

ERIC Educational Resources Information Center

George Washington Univ., Washington, DC. Inst. for Educational Leadership.

This report reviews the findings of two projects funded by the National Institute of Education (NIE) ano conducted by the American Institutes for Research (AIR). The project reports, "Going Metric" and "Metric Inservice Teacher Training," document the impact of metric conversion on the educational systems of Great Britain, New…

Cross-evaluation of metrics to estimate the significance of creative works

PubMed Central

Wasserman, Max; Zeng, Xiao Han T.; Amaral, Luís A. Nunes

2015-01-01

In a world overflowing with creative works, it is useful to be able to filter out the unimportant works so that the significant ones can be identified and thereby absorbed. An automated method could provide an objective approach for evaluating the significance of works on a universal scale. However, there have been few attempts at creating such a measure, and there are few “ground truths” for validating the effectiveness of potential metrics for significance. For movies, the US Library of Congress’s National Film Registry (NFR) contains American films that are “culturally, historically, or aesthetically significant” as chosen through a careful evaluation and deliberation process. By analyzing a network of citations between 15,425 United States-produced films procured from the Internet Movie Database (IMDb), we obtain several automated metrics for significance. The best of these metrics is able to indicate a film’s presence in the NFR at least as well or better than metrics based on aggregated expert opinions or large population surveys. Importantly, automated metrics can easily be applied to older films for which no other rating may be available. Our results may have implications for the evaluation of other creative works such as scientific research. PMID:25605881

Metric anisotropies and emergent anisotropic hydrodynamics

NASA Astrophysics Data System (ADS)

Dash, Ashutosh; Jaiswal, Amaresh

2018-05-01

Expansion of a locally equilibrated fluid is considered in an anisotropic space-time given by the Bianchi type-I metric. Starting from the isotropic equilibrium phase-space distribution function in the local rest frame, we obtain expressions for components of the energy-momentum tensor and conserved current, such as number density, energy density, and pressure components. In the case of an axissymmetric Bianchi type-I metric, we show that they are identical to those obtained within the setup of anisotropic hydrodynamics. We further consider the case in which the Bianchi type-I metric is a vacuum solution of the Einstein equation: the Kasner metric. For the axissymmetric Kasner metric, we discuss the implications of our results in the context of anisotropic hydrodynamics.

Measuring the impact of pharmacoepidemiologic research using altmetrics: A case study of a CNODES drug-safety article.

PubMed

Gamble, J M; Traynor, Robyn L; Gruzd, Anatoliy; Mai, Philip; Dormuth, Colin R; Sketris, Ingrid S

2018-03-24

To provide an overview of altmetrics, including their potential benefits and limitations, how they may be obtained, and their role in assessing pharmacoepidemiologic research impact. Our review was informed by compiling relevant literature identified through searching multiple health research databases (PubMed, Embase, and CIHNAHL) and grey literature sources (websites, blogs, and reports). We demonstrate how pharmacoepidemiologists, in particular, may use altmetrics to understand scholarly impact and knowledge translation by providing a case study of a drug-safety study conducted by the Canadian Network of Observational Drug Effect Studies. A common approach to measuring research impact is the use of citation-based metrics, such as an article's citation count or a journal's impact factor. "Alternative" metrics, or altmetrics, are increasingly supported as a complementary measure of research uptake in the age of social media. Altmetrics are nontraditional indicators that capture a diverse set of traceable, online research-related artifacts including peer-reviewed publications and other research outputs (software, datasets, blogs, videos, posters, policy documents, presentations, social media posts, wiki entries, etc). Compared with traditional citation-based metrics, altmetrics take a more holistic view of research impact, attempting to capture the activity and engagement of both scholarly and nonscholarly communities. Despite the limited theoretical underpinnings, possible commercial influence, potential for gaming and manipulation, and numerous data quality-related issues, altmetrics are promising as a supplement to more traditional citation-based metrics because they can ingest and process a larger set of data points related to the flow and reach of scholarly communication from an expanded pool of stakeholders. Unlike citation-based metrics, altmetrics are not inherently rooted in the research publication process, which includes peer review; it is unclear to

Numerical Calabi-Yau metrics

NASA Astrophysics Data System (ADS)

Douglas, Michael R.; Karp, Robert L.; Lukic, Sergio; Reinbacher, René

2008-03-01

We develop numerical methods for approximating Ricci flat metrics on Calabi-Yau hypersurfaces in projective spaces. Our approach is based on finding balanced metrics and builds on recent theoretical work by Donaldson. We illustrate our methods in detail for a one parameter family of quintics. We also suggest several ways to extend our results.

Metrics for Nurses Aides.

ERIC Educational Resources Information Center

Cooper, Gloria S., Ed.; Magisos, Joel H., Ed.

Designed to meet the job-related metric measurement needs of students interested in becoming nurses aides, this instructional package is one of five for the health occupations cluster, part of a set of 55 packages for metric instruction in different occupations. The package is intended for students who already know the occupational terminology,…

Metrics, Lumber, and the Shop Teacher

ERIC Educational Resources Information Center

Craemer, Peter J.

1978-01-01

As producers of lumber are preparing to convert their output to the metric system, wood shop and building construction teachers must become familiar with the metric measurement language and methods. Manufacturers prefer the "soft conversion" process of changing English to metric units rather than hard conversion, or redimensioning of lumber. Some…

Congress Inches Away from Metric Conversion

ERIC Educational Resources Information Center

Russell, Cristine

1974-01-01

Reasons are discussed concerning the House of Representatives' defeat in 1974 of a bill to establish a National Metric Conversion Board which would coordinate the process of voluntary conversion to the metric system a ten-year period. A brief history of the metric system in the United States is included. (DT)

Metrication: What Can HRD Specialists Do?

ERIC Educational Resources Information Center

Short, Larry G.

1978-01-01

First discusses some features of the Metric Conversion Act which established federal support of metric system usage in the United States. Then covers the following: what HRD (Human Resources Development) specialists can do to assist their company managers during the conversion process; metric training strategies; and how to prepare for metric…

Metrics for Evaluation of Student Models

ERIC Educational Resources Information Center

Pelanek, Radek

2015-01-01

Researchers use many different metrics for evaluation of performance of student models. The aim of this paper is to provide an overview of commonly used metrics, to discuss properties, advantages, and disadvantages of different metrics, to summarize current practice in educational data mining, and to provide guidance for evaluation of student…

Indicators of School Crime Safety, 2000.

ERIC Educational Resources Information Center

Kaufman, Phillip; Chen, Xianglei; Choy, Susan P.; Ruddy, Sally A.; Miller, Amanda K.; Fleury, Jill K.; Chandler, Kathryn A.; Rand, Michael R.; Klaus, Patsy; Planty, Michael

Providing the latest data, this report on school safety presents a mixed picture: while overall crime has declined, violence, gangs, and drugs remain at some schools. Victimization at school declined from 1995-99, though rates for fighting and weapon threats remain steady. Students seem more secure, and gang activity decreased; however, in grades…

Correlated Metrics Yield Multimetric Indices with Inferior Performance

EPA Science Inventory

Multimetric indices (MMIs) are widely used to assess the ecological health of freshwater ecosystems. An MMI is a sum of 5-15 standardized, numeric variables (or “metrics”), each representing a different attribute of a biological assemblage. Many researchers believe that highly co...

Candidate control design metrics for an agile fighter

NASA Technical Reports Server (NTRS)

Murphy, Patrick C.; Bailey, Melvin L.; Ostroff, Aaron J.

1991-01-01

Success in the fighter combat environment of the future will certainly demand increasing capability from aircraft technology. These advanced capabilities in the form of superagility and supermaneuverability will require special design techniques which translate advanced air combat maneuvering requirements into design criteria. Control design metrics can provide some of these techniques for the control designer. Thus study presents an overview of control design metrics and investigates metrics for advanced fighter agility. The objectives of various metric users, such as airframe designers and pilots, are differentiated from the objectives of the control designer. Using an advanced fighter model, metric values are documented over a portion of the flight envelope through piloted simulation. These metric values provide a baseline against which future control system improvements can be compared and against which a control design methodology can be developed. Agility is measured for axial, pitch, and roll axes. Axial metrics highlight acceleration and deceleration capabilities under different flight loads and include specific excess power measurements to characterize energy meneuverability. Pitch metrics cover both body-axis and wind-axis pitch rates and accelerations. Included in pitch metrics are nose pointing metrics which highlight displacement capability between the nose and the velocity vector. Roll metrics (or torsion metrics) focus on rotational capability about the wind axis.

Fundamentals of health risk assessment. Use, derivation, validity and limitations of safety indices.

PubMed

Putzrath, R M; Wilson, J D

1999-04-01

We investigated the way results of human health risk assessments are used, and the theory used to describe those methods, sometimes called the "NAS paradigm." Contrary to a key tenet of that theory, current methods have strictly limited utility. The characterizations now considered standard, Safety Indices such as "Acceptable Daily Intake," "Reference Dose," and so on, usefully inform only decisions that require a choice between two policy alternatives (e.g., approve a food additive or not), decided solely on the basis of a finding of safety. Risk is characterized as the quotient of one of these Safety Indices divided by an estimate of exposure: a quotient greater than one implies that the situation may be considered safe. Such decisions are very widespread, both in the U.S. federal government and elsewhere. No current method is universal; different policies lead to different practices, for example, in California's "Proposition 65," where statutory provisions specify some practices. Further, an important kind of human health risk assessment is not recognized by this theory: this kind characterizes risk as likelihood of harm, given estimates of exposure consequent to various decision choices. Likelihood estimates are necessary whenever decision makers have many possible decision choices and must weigh more than two societal values, such as in EPA's implementation of "conventional air pollutants." These estimates can not be derived using current methods; different methods are needed. Our analysis suggests changes needed in both the theory and practice of human health risk assessment, and how what is done is depicted.

Going Metric...PAL (Programmed Assigned Learning).

ERIC Educational Resources Information Center

Wallace, Jesse D.

This 41-page programed booklet is intended for use by students and adults. It introduces the metric units for length, area, volume, and temperature through a series of questions and answers. The advantages of the metric system over the English system are discussed. Conversion factors are introduced and several applications of the metric system in…

On general (α,β)-metrics of Landsberg type

NASA Astrophysics Data System (ADS)

Zohrehvand, M.; Maleki, H.

2016-05-01

In this paper, we study a class of Finsler metrics, which are defined by a Riemannian metric α and a one-form β. They are called general (α,β)-metrics. We have proven that, every Landsberg general (α,β)-metric is a Berwald metric, under a certain condition. This shows that the hunting for an unicorn, one of the longest standing open problem in Finsler geometry, cannot be successful in the class of general (α,β)-metrics.

Comparison of continuous versus categorical tumor measurement-based metrics to predict overall survival in cancer treatment trials.

PubMed

An, Ming-Wen; Mandrekar, Sumithra J; Branda, Megan E; Hillman, Shauna L; Adjei, Alex A; Pitot, Henry C; Goldberg, Richard M; Sargent, Daniel J

2011-10-15

The categorical definition of response assessed via the Response Evaluation Criteria in Solid Tumors has documented limitations. We sought to identify alternative metrics for tumor response that improve prediction of overall survival. Individual patient data from three North Central Cancer Treatment Group trials (N0026, n = 117; N9741, n = 1,109; and N9841, n = 332) were used. Continuous metrics of tumor size based on longitudinal tumor measurements were considered in addition to a trichotomized response [TriTR: response (complete or partial) vs. stable disease vs. progression). Cox proportional hazards models, adjusted for treatment arm and baseline tumor burden, were used to assess the impact of the metrics on subsequent overall survival, using a landmark analysis approach at 12, 16, and 24 weeks postbaseline. Model discrimination was evaluated by the concordance (c) index. The overall best response rates for the three trials were 26%, 45%, and 25%, respectively. Although nearly all metrics were statistically significantly associated with overall survival at the different landmark time points, the concordance indices (c-index) for the traditional response metrics ranged from 0.59 to 0.65; for the continuous metrics from 0.60 to 0.66; and for the TriTR metrics from 0.64 to 0.69. The c-indices for TriTR at 12 weeks were comparable with those at 16 and 24 weeks. Continuous tumor measurement-based metrics provided no predictive improvement over traditional response-based metrics or TriTR; TriTR had better predictive ability than best TriTR or confirmed response. If confirmed, TriTR represents a promising endpoint for future phase II trials. ©2011 AACR.

Issues in Benchmark Metric Selection

NASA Astrophysics Data System (ADS)

Crolotte, Alain

It is true that a metric can influence a benchmark but will esoteric metrics create more problems than they will solve? We answer this question affirmatively by examining the case of the TPC-D metric which used the much debated geometric mean for the single-stream test. We will show how a simple choice influenced the benchmark and its conduct and, to some extent, DBMS development. After examining other alternatives our conclusion is that the “real” measure for a decision-support benchmark is the arithmetic mean.

Influence Map Methodology for Evaluating Systemic Safety Issues

NASA Technical Reports Server (NTRS)

2008-01-01

"Raising the bar" in safety performance is a critical challenge for many organizations, including Kennedy Space Center. Contributing-factor taxonomies organize information about the reasons accidents occur and therefore are essential elements of accident investigations and safety reporting systems. Organizations must balance efforts to identify causes of specific accidents with efforts to evaluate systemic safety issues in order to become more proactive about improving safety. This project successfully addressed the following two problems: (1) methods and metrics to support the design of effective taxonomies are limited and (2) influence relationships among contributing factors are not explicitly modeled within a taxonomy.

Frail or hale: Skeletal frailty indices in Medieval London skeletons

PubMed Central

Crews, Douglas E.

2017-01-01

To broaden bioarchaeological applicability of skeletal frailty indices (SFIs) and increase sample size, we propose indices with fewer biomarkers (2–11 non-metric biomarkers) and compare these reduced biomarker SFIs to the original metric/non-metric 13-biomarker SFI. From the 2-11-biomarker SFIs, we choose the index with the fewest biomarkers (6-biomarker SFI), which still maintains the statistical robusticity of a 13-biomarker SFI, and apply this index to the same Medieval monastic and nonmonastic populations, albeit with an increased sample size. For this increased monastic and nonmonastic sample, we also propose and implement a 4-biomarker SFI, comprised of biomarkers from each of four stressor categories, and compare these SFI distributions with those of the non-metric biomarker SFIs. From the Museum of London WORD database, we tabulate multiple SFIs (2- to 13-biomarkers) for Medieval monastic and nonmonastic samples (N = 134). We evaluate associations between these ten non-metric SFIs and the 13-biomarker SFI using Spearman’s correlation coefficients. Subsequently, we test non-metric 6-biomarker and 4-biomarker SFI distributions for associations with cemetery, age, and sex using Analysis of Variance/Covariance (ANOVA/ANCOVA) on larger samples from the monastic and nonmonastic cemeteries (N = 517). For Medieval samples, Spearman’s correlation coefficients show a significant association between the 13-biomarker SFI and all non-metric SFIs. Utilizing a 6-biomarker and parsimonious 4-biomarker SFI, we increase the nonmonastic and monastic samples and demonstrate significant lifestyle and sex differences in frailty that were not observed in the original, smaller sample. Results from the 6-biomarker and parsimonious 4-biomarker SFIs generally indicate similarities in means, explained variation (R2), and associated P-values (ANOVA/ANCOVA) within and between nonmonastic and monastic samples. We show that non-metric reduced biomarker SFIs provide alternative

Oculomotor Behavior Metrics Change According to Circadian Phase and Time Awake

NASA Technical Reports Server (NTRS)

Flynn-Evans, Erin E.; Tyson, Terence L.; Cravalho, Patrick; Feick, Nathan; Stone, Leland S.

2017-01-01

There is a need for non-invasive, objective measures to forecast performance impairment arising from sleep loss and circadian misalignment, particularly in safety-sensitive occupations. Eye-tracking devices have been used in some operational scenarios, but such devices typically focus on eyelid closures and slow rolling eye movements and are susceptible to the intrusion of head movement artifacts. We hypothesized that an expanded suite of oculomotor behavior metrics, collected during a visual tracking task, would change according to circadian phase and time awake, and could be used as a marker of performance impairment.

Road Risk Modeling and Cloud-Aided Safety-Based Route Planning.

PubMed

Li, Zhaojian; Kolmanovsky, Ilya; Atkins, Ella; Lu, Jianbo; Filev, Dimitar P; Michelini, John

2016-11-01

This paper presents a safety-based route planner that exploits vehicle-to-cloud-to-vehicle (V2C2V) connectivity. Time and road risk index (RRI) are considered as metrics to be balanced based on user preference. To evaluate road segment risk, a road and accident database from the highway safety information system is mined with a hybrid neural network model to predict RRI. Real-time factors such as time of day, day of the week, and weather are included as correction factors to the static RRI prediction. With real-time RRI and expected travel time, route planning is formulated as a multiobjective network flow problem and further reduced to a mixed-integer programming problem. A V2C2V implementation of our safety-based route planning approach is proposed to facilitate access to real-time information and computing resources. A real-world case study, route planning through the city of Columbus, Ohio, is presented. Several scenarios illustrate how the "best" route can be adjusted to favor time versus safety metrics.

Biologically Relevant Heterogeneity: Metrics and Practical Insights

PubMed Central

Gough, A; Stern, AM; Maier, J; Lezon, T; Shun, T-Y; Chennubhotla, C; Schurdak, ME; Haney, SA; Taylor, DL

2017-01-01

Heterogeneity is a fundamental property of biological systems at all scales that must be addressed in a wide range of biomedical applications including basic biomedical research, drug discovery, diagnostics and the implementation of precision medicine. There are a number of published approaches to characterizing heterogeneity in cells in vitro and in tissue sections. However, there are no generally accepted approaches for the detection and quantitation of heterogeneity that can be applied in a relatively high throughput workflow. This review and perspective emphasizes the experimental methods that capture multiplexed cell level data, as well as the need for standard metrics of the spatial, temporal and population components of heterogeneity. A recommendation is made for the adoption of a set of three heterogeneity indices that can be implemented in any high throughput workflow to optimize the decision-making process. In addition, a pairwise mutual information method is suggested as an approach to characterizing the spatial features of heterogeneity, especially in tissue-based imaging. Furthermore, metrics for temporal heterogeneity are in the early stages of development. Example studies indicate that the analysis of functional phenotypic heterogeneity can be exploited to guide decisions in the interpretation of biomedical experiments, drug discovery, diagnostics and the design of optimal therapeutic strategies for individual patients. PMID:28231035

Biologically Relevant Heterogeneity: Metrics and Practical Insights.

PubMed

Gough, Albert; Stern, Andrew M; Maier, John; Lezon, Timothy; Shun, Tong-Ying; Chennubhotla, Chakra; Schurdak, Mark E; Haney, Steven A; Taylor, D Lansing

2017-03-01

Heterogeneity is a fundamental property of biological systems at all scales that must be addressed in a wide range of biomedical applications, including basic biomedical research, drug discovery, diagnostics, and the implementation of precision medicine. There are a number of published approaches to characterizing heterogeneity in cells in vitro and in tissue sections. However, there are no generally accepted approaches for the detection and quantitation of heterogeneity that can be applied in a relatively high-throughput workflow. This review and perspective emphasizes the experimental methods that capture multiplexed cell-level data, as well as the need for standard metrics of the spatial, temporal, and population components of heterogeneity. A recommendation is made for the adoption of a set of three heterogeneity indices that can be implemented in any high-throughput workflow to optimize the decision-making process. In addition, a pairwise mutual information method is suggested as an approach to characterizing the spatial features of heterogeneity, especially in tissue-based imaging. Furthermore, metrics for temporal heterogeneity are in the early stages of development. Example studies indicate that the analysis of functional phenotypic heterogeneity can be exploited to guide decisions in the interpretation of biomedical experiments, drug discovery, diagnostics, and the design of optimal therapeutic strategies for individual patients.

Knowledge Dissemination of Intimate Partner Violence Intervention Studies Measured Using Alternative Metrics: Results From a Scoping Review.

PubMed

Madden, Kim; Evaniew, Nathan; Scott, Taryn; Domazetoska, Elena; Dosanjh, Pritnek; Li, Chuan Silvia; Thabane, Lehana; Bhandari, Mohit; Sprague, Sheila

2016-07-01

Alternative metrics measure the number of online mentions that an academic paper receives, including mentions in social media and online news outlets. It is important to monitor and measure dispersion of intimate partner violence (IPV) victim intervention research so that we can improve our knowledge translation and exchange (KTE) processes improving utilization of study findings. The objective of this study is to describe the dissemination of published IPV victim intervention studies and to explore which study characteristics are associated with a greater number of alternative metric mentions and conventional citations. As part of a larger scoping review, we conducted a literature search to identify IPV intervention studies. Outcomes included znumber of alternative metric mentions and conventional citations. Fifty-nine studies were included in this study. The median number of alternative metric mentions was six, and the median number of conventional citations was two. Forty-one percent of the studies (24/59) had no alternative metric mentions, and 27% (16/59) had no conventional citations. Longer time since publication was significantly associated with a greater number of mentions and citations, as were systematic reviews and randomized controlled trial designs. The majority of IPV studies receive little to no online attention or citations in academic journals, indicating a need for the field to focus on implementing strong knowledge dissemination plans. The papers receiving the most alternative metric mentions and conventional citations were also the more rigorous study designs, indicating a need to focus on study quality. We recommend using alternative metrics in conjunction with conventional metrics to evaluate the full dissemination of IPV research.

Expedient Metrics to Describe Plant Community Change Across Gradients of Anthropogenic Influence

NASA Astrophysics Data System (ADS)

Marcelino, José A. P.; Weber, Everett; Silva, Luís; Garcia, Patrícia V.; Soares, António O.

2014-11-01

Human influence associated with land use may cause considerable biodiversity losses, namely in oceanic islands such as the Azores. Our goal was to identify plant indicator species across two gradients of increasing anthropogenic influence and management (arborescent and herbaceous communities) and determine similarity between plant communities of uncategorized vegetation plots to those in reference gradients using metrics derived from R programming. We intend to test and provide an expedient way to determine the conservation value of a given uncategorized vegetation plot based on the number of native, endemic, introduced, and invasive indicator species present. Using the metric IndVal, plant taxa with a significant indicator value for each community type in the two anthropogenic gradients were determined. A new metric, ComVal, was developed to assess the similarity of an uncategorized vegetation plot toward a reference community type, based on (i) the percentage of pre-defined indicator species from reference communities present in the vegetation plots, and (ii) the percentage of indicator species, specific to a given reference community type, present in the vegetation plot. Using a data resampling approach, the communities were randomly used as training or validation sets to classify vegetation plots based on ComVal. The percentage match with reference community types ranged from 77 to 100 % and from 79 to 100 %, for herbaceous and arborescent vegetation plots, respectively. Both IndVal and ComVal are part of a suite of useful tools characterizing plant communities and plant community change along gradients of anthropogenic influence without a priori knowledge of their biology and ecology.

Seabird nest counts: A test of monitoring metrics using Red-tailed Tropicbirds

USGS Publications Warehouse

Seavy, N.E.; Reynolds, M.H.

2009-01-01

Counts of nesting birds are often used to monitor the abundance of breeding pairs at colonies. Mean incubation counts (MICs) are counts of nests with eggs at intervals that correspond to the mean incubation period of a species. The sum of all counts during the nesting season (MICtotal) and the highest single count during the season (MICmax) are metrics that can be generated from this method. However, the utility of these metrics as measures of the number of breeding pairs has not been well tested. We used two approaches to evaluate the bias and precision of MIC metrics for quantifying annual variation in the number of breeding Red-tailed Tropicbirds (Phaethon rubricauda) nesting on two islands in the Papahnaumokukea Marine National Monument in the northwest Hawaiian Islands. First, we used data from nest plots with individually marked birds to generate simulated MIC metrics that we compared to the known number of nesting individuals. The MICtotal overestimated the number of pairs by about 5%, whereas the MICmax underestimated the number of pairs by about 60%. However, both metrics exhibited similar precision. Second, we used a 12-yr time series of island-wide MICs to compare estimates of temporal trend and annual variation using the MICmax and MICtotal. The 95% confidence intervals for the trend estimates were overlapping and the residual standard errors for the two metrics were similar. Our results suggest that both metrics offered similar precision for indices of breeding pairs of Red-tailed Tropicbirds, but that MICtotal was more accurate. ?? 2009 Association of Field Ornithologists.

A generalized exponential link function to map a conflict indicator into severity index within safety continuum framework.

PubMed

Zheng, Lai; Ismail, Karim

2017-05-01

Traffic conflict indicators measure the temporal and spatial proximity of conflict-involved road users. These indicators can reflect the severity of traffic conflicts to a reliable extent. Instead of using the indicator value directly as a severity index, many link functions have been developed to map the conflict indicator to a severity index. However, little information is available about the choice of a particular link function. To guard against link misspecification or subjectivity, a generalized exponential link function was developed. The severity index generated by this link was introduced to a parametric safety continuum model which objectively models the centre and tail regions. An empirical method, together with full Bayesian estimation method was adopted to estimate model parameters. The safety implication of return level was calculated based on the model parameters. The proposed approach was applied to the conflict and crash data collected from 21 segments from three freeways located in Guangdong province, China. The Pearson's correlation test between return levels and observed crashes showed that a θ value of 1.2 was the best choice of the generalized parameter for current data set. This provides statistical support for using the generalized exponential link function. With the determined generalized exponential link function, the visualization of parametric safety continuum was found to be a gyroscope-shaped hierarchy. Copyright © 2017 Elsevier Ltd. All rights reserved.

Boundary term in metric f ( R) gravity: field equations in the metric formalism

NASA Astrophysics Data System (ADS)

Guarnizo, Alejandro; Castañeda, Leonardo; Tejeiro, Juan M.

2010-11-01

The main goal of this paper is to get in a straightforward form the field equations in metric f ( R) gravity, using elementary variational principles and adding a boundary term in the action, instead of the usual treatment in an equivalent scalar-tensor approach. We start with a brief review of the Einstein-Hilbert action, together with the Gibbons-York-Hawking boundary term, which is mentioned in some literature, but is generally missing. Next we present in detail the field equations in metric f ( R) gravity, including the discussion about boundaries, and we compare with the Gibbons-York-Hawking term in General Relativity. We notice that this boundary term is necessary in order to have a well defined extremal action principle under metric variation.

Impact of distance-based metric learning on classification and visualization model performance and structure-activity landscapes.

PubMed

Kireeva, Natalia V; Ovchinnikova, Svetlana I; Kuznetsov, Sergey L; Kazennov, Andrey M; Tsivadze, Aslan Yu

2014-02-01

This study concerns large margin nearest neighbors classifier and its multi-metric extension as the efficient approaches for metric learning which aimed to learn an appropriate distance/similarity function for considered case studies. In recent years, many studies in data mining and pattern recognition have demonstrated that a learned metric can significantly improve the performance in classification, clustering and retrieval tasks. The paper describes application of the metric learning approach to in silico assessment of chemical liabilities. Chemical liabilities, such as adverse effects and toxicity, play a significant role in drug discovery process, in silico assessment of chemical liabilities is an important step aimed to reduce costs and animal testing by complementing or replacing in vitro and in vivo experiments. Here, to our knowledge for the first time, a distance-based metric learning procedures have been applied for in silico assessment of chemical liabilities, the impact of metric learning on structure-activity landscapes and predictive performance of developed models has been analyzed, the learned metric was used in support vector machines. The metric learning results have been illustrated using linear and non-linear data visualization techniques in order to indicate how the change of metrics affected nearest neighbors relations and descriptor space.

Impact of distance-based metric learning on classification and visualization model performance and structure-activity landscapes

NASA Astrophysics Data System (ADS)

Kireeva, Natalia V.; Ovchinnikova, Svetlana I.; Kuznetsov, Sergey L.; Kazennov, Andrey M.; Tsivadze, Aslan Yu.

2014-02-01

This study concerns large margin nearest neighbors classifier and its multi-metric extension as the efficient approaches for metric learning which aimed to learn an appropriate distance/similarity function for considered case studies. In recent years, many studies in data mining and pattern recognition have demonstrated that a learned metric can significantly improve the performance in classification, clustering and retrieval tasks. The paper describes application of the metric learning approach to in silico assessment of chemical liabilities. Chemical liabilities, such as adverse effects and toxicity, play a significant role in drug discovery process, in silico assessment of chemical liabilities is an important step aimed to reduce costs and animal testing by complementing or replacing in vitro and in vivo experiments. Here, to our knowledge for the first time, a distance-based metric learning procedures have been applied for in silico assessment of chemical liabilities, the impact of metric learning on structure-activity landscapes and predictive performance of developed models has been analyzed, the learned metric was used in support vector machines. The metric learning results have been illustrated using linear and non-linear data visualization techniques in order to indicate how the change of metrics affected nearest neighbors relations and descriptor space.

National evaluation of multidisciplinary quality metrics for head and neck cancer.

PubMed

Cramer, John D; Speedy, Sedona E; Ferris, Robert L; Rademaker, Alfred W; Patel, Urjeet A; Samant, Sandeep

2017-11-15

The National Quality Forum has endorsed quality-improvement measures for multiple cancer types that are being developed into actionable tools to improve cancer care. No nationally endorsed quality metrics currently exist for head and neck cancer. The authors identified patients with surgically treated, invasive, head and neck squamous cell carcinoma in the National Cancer Data Base from 2004 to 2014 and compared the rate of adherence to 5 different quality metrics and whether compliance with these quality metrics impacted overall survival. The metrics examined included negative surgical margins, neck dissection lymph node (LN) yield ≥ 18, appropriate adjuvant radiation, appropriate adjuvant chemoradiation, adjuvant therapy within 6 weeks, as well as overall quality. In total, 76,853 eligible patients were identified. There was substantial variability in patient-level adherence, which was 80% for negative surgical margins, 73.1% for neck dissection LN yield, 69% for adjuvant radiation, 42.6% for adjuvant chemoradiation, and 44.5% for adjuvant therapy within 6 weeks. Risk-adjusted Cox proportional-hazard models indicated that all metrics were associated with a reduced risk of death: negative margins (hazard ratio [HR] 0.73; 95% confidence interval [CI], 0.71-0.76), LN yield ≥ 18 (HR, 0.93; 95% CI, 0.89-0.96), adjuvant radiation (HR, 0.67; 95% CI, 0.64-0.70), adjuvant chemoradiation (HR, 0.84; 95% CI, 0.79-0.88), and adjuvant therapy ≤6 weeks (HR, 0.92; 95% CI, 0.89-0.96). Patients who received high-quality care had a 19% reduced adjusted hazard of mortality (HR, 0.81; 95% CI, 0.79-0.83). Five head and neck cancer quality metrics were identified that have substantial variability in adherence and meaningfully impact overall survival. These metrics are appropriate candidates for national adoption. Cancer 2017;123:4372-81. © 2017 American Cancer Society. © 2017 American Cancer Society.

The power metric: a new statistically robust enrichment-type metric for virtual screening applications with early recovery capability.

PubMed

Lopes, Julio Cesar Dias; Dos Santos, Fábio Mendes; Martins-José, Andrelly; Augustyns, Koen; De Winter, Hans

2017-01-01

A new metric for the evaluation of model performance in the field of virtual screening and quantitative structure-activity relationship applications is described. This metric has been termed the power metric and is defined as the fraction of the true positive rate divided by the sum of the true positive and false positive rates, for a given cutoff threshold. The performance of this metric is compared with alternative metrics such as the enrichment factor, the relative enrichment factor, the receiver operating curve enrichment factor, the correct classification rate, Matthews correlation coefficient and Cohen's kappa coefficient. The performance of this new metric is found to be quite robust with respect to variations in the applied cutoff threshold and ratio of the number of active compounds to the total number of compounds, and at the same time being sensitive to variations in model quality. It possesses the correct characteristics for its application in early-recognition virtual screening problems.

Visual salience metrics for image inpainting

NASA Astrophysics Data System (ADS)

Ardis, Paul A.; Singhal, Amit

2009-01-01

Quantitative metrics for successful image inpainting currently do not exist, with researchers instead relying upon qualitative human comparisons to evaluate their methodologies and techniques. In an attempt to rectify this situation, we propose two new metrics to capture the notions of noticeability and visual intent in order to evaluate inpainting results. The proposed metrics use a quantitative measure of visual salience based upon a computational model of human visual attention. We demonstrate how these two metrics repeatably correlate with qualitative opinion in a human observer study, correctly identify the optimum uses for exemplar-based inpainting (as specified in the original publication), and match qualitative opinion in published examples.

Measuring Information Security: Guidelines to Build Metrics

NASA Astrophysics Data System (ADS)

von Faber, Eberhard

Measuring information security is a genuine interest of security managers. With metrics they can develop their security organization's visibility and standing within the enterprise or public authority as a whole. Organizations using information technology need to use security metrics. Despite the clear demands and advantages, security metrics are often poorly developed or ineffective parameters are collected and analysed. This paper describes best practices for the development of security metrics. First attention is drawn to motivation showing both requirements and benefits. The main body of this paper lists things which need to be observed (characteristic of metrics), things which can be measured (how measurements can be conducted) and steps for the development and implementation of metrics (procedures and planning). Analysis and communication is also key when using security metrics. Examples are also given in order to develop a better understanding. The author wants to resume, continue and develop the discussion about a topic which is or increasingly will be a critical factor of success for any security managers in larger organizations.

Five major NASA health and safety issues

NASA Astrophysics Data System (ADS)

Gavert, Raymond B.

2000-01-01

The goal has been set to establish NASA as number one in safety in the nation. This includes Systems and Mission Safety as well as Occupational Safety for all NASA employees and contractors on and off the job. There are five major health and safety issues important in the pursuit of being number one and they are: (1) Radiation (2) Hearing (3) Habitability/Toxicology (4) Extravehicular Activity (EVA) (5) Stress. The issues have features of accumulated injury since NASA's future missions involve long time human presence in space i.e., International Space Station operations and Mars missions. The objective of this paper is to discuss these five issues in terms of controlling risks and enhancing health and safety. Safety metrics are discussed in terms of the overall goal of NASA to be number one in safety. .

Metrics Handbook (Air Force Systems Command)

NASA Astrophysics Data System (ADS)

1991-08-01

The handbook is designed to help one develop and use good metrics. It is intended to provide sufficient information to begin developing metrics for objectives, processes, and tasks, and to steer one toward appropriate actions based on the data one collects. It should be viewed as a road map to assist one in arriving at meaningful metrics and to assist in continuous process improvement.

Data-driven management using quantitative metric and automatic auditing program (QMAP) improves consistency of radiation oncology processes.

PubMed

Yu, Naichang; Xia, Ping; Mastroianni, Anthony; Kolar, Matthew D; Chao, Samuel T; Greskovich, John F; Suh, John H

Process consistency in planning and delivery of radiation therapy is essential to maintain patient safety and treatment quality and efficiency. Ensuring the timely completion of each critical clinical task is one aspect of process consistency. The purpose of this work is to report our experience in implementing a quantitative metric and automatic auditing program (QMAP) with a goal of improving the timely completion of critical clinical tasks. Based on our clinical electronic medical records system, we developed a software program to automatically capture the completion timestamp of each critical clinical task while providing frequent alerts of potential delinquency. These alerts were directed to designated triage teams within a time window that would offer an opportunity to mitigate the potential for late completion. Since July 2011, 18 metrics were introduced in our clinical workflow. We compared the delinquency rates for 4 selected metrics before the implementation of the metric with the delinquency rate of 2016. One-tailed Student t test was used for statistical analysis RESULTS: With an average of 150 daily patients on treatment at our main campus, the late treatment plan completion rate and late weekly physics check were reduced from 18.2% and 8.9% in 2011 to 4.2% and 0.1% in 2016, respectively (P < .01). The late weekly on-treatment physician visit rate was reduced from 7.2% in 2012 to <1.6% in 2016. The yearly late cone beam computed tomography review rate was reduced from 1.6% in 2011 to <0.1% in 2016. QMAP is effective in reducing late completions of critical tasks, which can positively impact treatment quality and patient safety by reducing the potential for errors resulting from distractions, interruptions, and rush in completion of critical tasks. Copyright © 2016 American Society for Radiation Oncology. Published by Elsevier Inc. All rights reserved.

Evaluation of a Metric Booklet as a Supplement to Teaching the Metric System to Undergraduate Non-Science Majors.

ERIC Educational Resources Information Center

Exum, Kenith Gene

Examined is the effectiveness of a method of teaching the metric system using the booklet, Metric Supplement to Mathematics, in combination with a physical science textbook. The participants in the study were randomly selected undergraduates in a non-science oriented program of study. Instruments used included the Metric Supplement to Mathematics…

A Metric on Phylogenetic Tree Shapes

PubMed Central

Plazzotta, G.

2018-01-01

Abstract The shapes of evolutionary trees are influenced by the nature of the evolutionary process but comparisons of trees from different processes are hindered by the challenge of completely describing tree shape. We present a full characterization of the shapes of rooted branching trees in a form that lends itself to natural tree comparisons. We use this characterization to define a metric, in the sense of a true distance function, on tree shapes. The metric distinguishes trees from random models known to produce different tree shapes. It separates trees derived from tropical versus USA influenza A sequences, which reflect the differing epidemiology of tropical and seasonal flu. We describe several metrics based on the same core characterization, and illustrate how to extend the metric to incorporate trees’ branch lengths or other features such as overall imbalance. Our approach allows us to construct addition and multiplication on trees, and to create a convex metric on tree shapes which formally allows computation of average tree shapes. PMID:28472435

Parameterized centrality metric for network analysis

NASA Astrophysics Data System (ADS)

Ghosh, Rumi; Lerman, Kristina

2011-06-01

A variety of metrics have been proposed to measure the relative importance of nodes in a network. One of these, alpha-centrality [P. Bonacich, Am. J. Sociol.0002-960210.1086/228631 92, 1170 (1987)], measures the number of attenuated paths that exist between nodes. We introduce a normalized version of this metric and use it to study network structure, for example, to rank nodes and find community structure of the network. Specifically, we extend the modularity-maximization method for community detection to use this metric as the measure of node connectivity. Normalized alpha-centrality is a powerful tool for network analysis, since it contains a tunable parameter that sets the length scale of interactions. Studying how rankings and discovered communities change when this parameter is varied allows us to identify locally and globally important nodes and structures. We apply the proposed metric to several benchmark networks and show that it leads to better insights into network structure than alternative metrics.

48 CFR 611.002-70 - Metric system implementation.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 4 2011-10-01 2011-10-01 false Metric system... COMPETITION AND ACQUISITION PLANNING DESCRIBING AGENCY NEEDS 611.002-70 Metric system implementation. (a... to metric policy to adopt the metric system as the preferred system of weights and measurements for...

48 CFR 611.002-70 - Metric system implementation.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 4 2013-10-01 2013-10-01 false Metric system... COMPETITION AND ACQUISITION PLANNING DESCRIBING AGENCY NEEDS 611.002-70 Metric system implementation. (a... to metric policy to adopt the metric system as the preferred system of weights and measurements for...

48 CFR 611.002-70 - Metric system implementation.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 4 2014-10-01 2014-10-01 false Metric system... COMPETITION AND ACQUISITION PLANNING DESCRIBING AGENCY NEEDS 611.002-70 Metric system implementation. (a... to metric policy to adopt the metric system as the preferred system of weights and measurements for...

48 CFR 611.002-70 - Metric system implementation.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 4 2012-10-01 2012-10-01 false Metric system... COMPETITION AND ACQUISITION PLANNING DESCRIBING AGENCY NEEDS 611.002-70 Metric system implementation. (a... to metric policy to adopt the metric system as the preferred system of weights and measurements for...

Integrating health and safety in the workplace: how closely aligning health and safety strategies can yield measurable benefits.

PubMed

Loeppke, Ronald R; Hohn, Todd; Baase, Catherine; Bunn, William B; Burton, Wayne N; Eisenberg, Barry S; Ennis, Trish; Fabius, Raymond; Hawkins, R Jack; Hudson, T Warner; Hymel, Pamela A; Konicki, Doris; Larson, Paul; McLellan, Robert K; Roberts, Mark A; Usrey, Cary; Wallace, Joseph A; Yarborough, Charles M; Siuba, Justina

2015-05-01

To better understand how integrating health and safety strategies in the workplace has evolved and establish a replicable, scalable framework for advancing the concept with a system of health and safety metrics, modeled after the Dow Jones Sustainability Index. Seven leading national and international programs aimed at creating a culture of health and safety in the workplace were compared and contrasted. A list of forty variables was selected, making it clear there is a wide variety of approaches to integration of health and safety in the workplace. Depending on how well developed the culture of health and safety is within a company, there are unique routes to operationalize and institutionalize the integration of health and safety strategies to achieve measurable benefits to enhance the overall health and well-being of workers, their families, and the community.

Common Metrics for Human-Robot Interaction

NASA Technical Reports Server (NTRS)

Steinfeld, Aaron; Lewis, Michael; Fong, Terrence; Scholtz, Jean; Schultz, Alan; Kaber, David; Goodrich, Michael

2006-01-01

This paper describes an effort to identify common metrics for task-oriented human-robot interaction (HRI). We begin by discussing the need for a toolkit of HRI metrics. We then describe the framework of our work and identify important biasing factors that must be taken into consideration. Finally, we present suggested common metrics for standardization and a case study. Preparation of a larger, more detailed toolkit is in progress.

Improving benchmarking by using an explicit framework for the development of composite indicators: an example using pediatric quality of care

PubMed Central

2010-01-01

Background The measurement of healthcare provider performance is becoming more widespread. Physicians have been guarded about performance measurement, in part because the methodology for comparative measurement of care quality is underdeveloped. Comprehensive quality improvement will require comprehensive measurement, implying the aggregation of multiple quality metrics into composite indicators. Objective To present a conceptual framework to develop comprehensive, robust, and transparent composite indicators of pediatric care quality, and to highlight aspects specific to quality measurement in children. Methods We reviewed the scientific literature on composite indicator development, health systems, and quality measurement in the pediatric healthcare setting. Frameworks were selected for explicitness and applicability to a hospital-based measurement system. Results We synthesized various frameworks into a comprehensive model for the development of composite indicators of quality of care. Among its key premises, the model proposes identifying structural, process, and outcome metrics for each of the Institute of Medicine's six domains of quality (safety, effectiveness, efficiency, patient-centeredness, timeliness, and equity) and presents a step-by-step framework for embedding the quality of care measurement model into composite indicator development. Conclusions The framework presented offers researchers an explicit path to composite indicator development. Without a scientifically robust and comprehensive approach to measurement of the quality of healthcare, performance measurement will ultimately fail to achieve its quality improvement goals. PMID:20181129

14 CFR 1274.206 - Metric Conversion Act.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Metric Conversion Act. 1274.206 Section 1274.206 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION COOPERATIVE AGREEMENTS WITH COMMERCIAL FIRMS Pre-Award Requirements § 1274.206 Metric Conversion Act. The Metric Conversion...

Symplectic potentials and resolved Ricci-flat ACG metrics

NASA Astrophysics Data System (ADS)

Balasubramanian, Aswin K.; Govindarajan, Suresh; Gowdigere, Chethan N.

2007-12-01

We pursue the symplectic description of toric Kähler manifolds. There exists a general local classification of metrics on toric Kähler manifolds equipped with Hamiltonian 2-forms due to Apostolov, Calderbank and Gauduchon (ACG). We derive the symplectic potential for these metrics. Using a method due to Abreu, we relate the symplectic potential to the canonical potential written by Guillemin. This enables us to recover the moment polytope associated with metrics and we thus obtain global information about the metric. We illustrate these general considerations by focusing on six-dimensional Ricci-flat metrics and obtain Ricci-flat metrics associated with real cones over Lpqr and Ypq manifolds. The metrics associated with cones over Ypq manifolds turn out to be partially resolved with two blow-up parameters taking special (non-zero) values. For a fixed Ypq manifold, we find explicit metrics for several inequivalent blow-ups parametrized by a natural number k in the range 0 < k < p. We also show that all known examples of resolved metrics such as the resolved conifold and the resolution of {\\bb C}^3/{\\bb Z}_3 also fit the ACG classification.

Metrics in method engineering

NASA Astrophysics Data System (ADS)

Brinkkemper, S.; Rossi, M.

1994-12-01

As customizable computer aided software engineering (CASE) tools, or CASE shells, have been introduced in academia and industry, there has been a growing interest into the systematic construction of methods and their support environments, i.e. method engineering. To aid the method developers and method selectors in their tasks, we propose two sets of metrics, which measure the complexity of diagrammatic specification techniques on the one hand, and of complete systems development methods on the other hand. Proposed metrics provide a relatively fast and simple way to analyze the technique (or method) properties, and when accompanied with other selection criteria, can be used for estimating the cost of learning the technique and the relative complexity of a technique compared to others. To demonstrate the applicability of the proposed metrics, we have applied them to 34 techniques and 15 methods.

On Applying the Prognostic Performance Metrics

NASA Technical Reports Server (NTRS)

Saxena, Abhinav; Celaya, Jose; Saha, Bhaskar; Saha, Sankalita; Goebel, Kai

2009-01-01

Prognostics performance evaluation has gained significant attention in the past few years. As prognostics technology matures and more sophisticated methods for prognostic uncertainty management are developed, a standardized methodology for performance evaluation becomes extremely important to guide improvement efforts in a constructive manner. This paper is in continuation of previous efforts where several new evaluation metrics tailored for prognostics were introduced and were shown to effectively evaluate various algorithms as compared to other conventional metrics. Specifically, this paper presents a detailed discussion on how these metrics should be interpreted and used. Several shortcomings identified, while applying these metrics to a variety of real applications, are also summarized along with discussions that attempt to alleviate these problems. Further, these metrics have been enhanced to include the capability of incorporating probability distribution information from prognostic algorithms as opposed to evaluation based on point estimates only. Several methods have been suggested and guidelines have been provided to help choose one method over another based on probability distribution characteristics. These approaches also offer a convenient and intuitive visualization of algorithm performance with respect to some of these new metrics like prognostic horizon and alpha-lambda performance, and also quantify the corresponding performance while incorporating the uncertainty information.

GNSS Receiver Identification Using Clock-Derived Metrics.

PubMed

Borio, Daniele; Gioia, Ciro; Cano Pons, Eduardo; Baldini, Gianmarco

2017-09-15

Falsifying Global Navigation Satellite System (GNSS) data with a simulator or with a fake receiver can have a significant economic or safety impact in many transportation applications where Position, Velocity and Time (PVT) are used to enforce a regulation. In this context, the authentication of the source of the PVT data (i.e., the GNSS receiver) is a requirement since data faking can become a serious threat. Receiver fingerprinting techniques represent possible countermeasures to verify the authenticity of a GNSS receiver and of its data. Herein, the potential of clock-derived metrics for GNSS receiver fingerprinting is investigated, and a filter approach is implemented for feature selection. Novel experimental results show that three intrinsic features are sufficient to identify a receiver. Moreover, the adopted technique is time effective as data blocks of about 40 min are sufficient to produce stable features for fingerprinting.

The Unfolding MD Simulations of Cyclophilin: Analyzed by Surface Contact Networks and Their Associated Metrics

PubMed Central

Roy, Sourav; Basu, Sankar; Dasgupta, Dipak; Bhattacharyya, Dhananjay; Banerjee, Rahul

2015-01-01

Currently, considerable interest exists with regard to the dissociation of close packed aminoacids within proteins, in the course of unfolding, which could result in either wet or dry moltenglobules. The progressive disjuncture of residues constituting the hydrophobic core ofcyclophilin from L. donovani (LdCyp) has been studied during the thermal unfolding of the molecule, by molecular dynamics simulations. LdCyp has been represented as a surface contactnetwork (SCN) based on the surface complementarity (Sm) of interacting residues within themolecular interior. The application of Sm to side chain packing within proteins make it a very sensitive indicator of subtle perturbations in packing, in the thermal unfolding of the protein. Network based metrics have been defined to track the sequential changes in the disintegration ofthe SCN spanning the hydrophobic core of LdCyp and these metrics prove to be highly sensitive compared to traditional metrics in indicating the increased conformational (and dynamical) flexibility in the network. These metrics have been applied to suggest criteria distinguishing DMG, WMG and transition state ensembles and to identify key residues involved in crucial conformational/topological events during the unfolding process. PMID:26545107

45 CFR 2543.15 - Metric system of measurement.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 45 Public Welfare 4 2012-10-01 2012-10-01 false Metric system of measurement. 2543.15 Section 2543...-PROFIT ORGANIZATIONS Pre-Award Requirements § 2543.15 Metric system of measurement. The Metric Conversion... activities. Metric implementation may take longer where the use of the system is initially impractical or...

45 CFR 2543.15 - Metric system of measurement.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 4 2010-10-01 2010-10-01 false Metric system of measurement. 2543.15 Section 2543...-PROFIT ORGANIZATIONS Pre-Award Requirements § 2543.15 Metric system of measurement. The Metric Conversion... activities. Metric implementation may take longer where the use of the system is initially impractical or...

20 CFR 435.15 - Metric system of measurement.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 2 2011-04-01 2011-04-01 false Metric system of measurement. 435.15 Section..., AND COMMERCIAL ORGANIZATIONS Pre-Award Requirements § 435.15 Metric system of measurement. The Metric... metric system is the preferred measurement system for U.S. trade and commerce. The Act requires each...

45 CFR 2543.15 - Metric system of measurement.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 4 2014-10-01 2014-10-01 false Metric system of measurement. 2543.15 Section 2543...-PROFIT ORGANIZATIONS Pre-Award Requirements § 2543.15 Metric system of measurement. The Metric Conversion... activities. Metric implementation may take longer where the use of the system is initially impractical or...

15 CFR 14.15 - Metric system of measurement.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 15 Commerce and Foreign Trade 1 2014-01-01 2014-01-01 false Metric system of measurement. 14.15... COMMERCIAL ORGANIZATIONS Pre-Award Requirements § 14.15 Metric system of measurement. The Metric Conversion... activities. Metric implementation may take longer where the use of the system is initially impractical or...

20 CFR 435.15 - Metric system of measurement.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 20 Employees' Benefits 2 2013-04-01 2013-04-01 false Metric system of measurement. 435.15 Section..., AND COMMERCIAL ORGANIZATIONS Pre-Award Requirements § 435.15 Metric system of measurement. The Metric... metric system is the preferred measurement system for U.S. trade and commerce. The Act requires each...

45 CFR 2543.15 - Metric system of measurement.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 45 Public Welfare 4 2013-10-01 2013-10-01 false Metric system of measurement. 2543.15 Section 2543...-PROFIT ORGANIZATIONS Pre-Award Requirements § 2543.15 Metric system of measurement. The Metric Conversion... activities. Metric implementation may take longer where the use of the system is initially impractical or...

45 CFR 2543.15 - Metric system of measurement.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 45 Public Welfare 4 2011-10-01 2011-10-01 false Metric system of measurement. 2543.15 Section 2543...-PROFIT ORGANIZATIONS Pre-Award Requirements § 2543.15 Metric system of measurement. The Metric Conversion... activities. Metric implementation may take longer where the use of the system is initially impractical or...

15 CFR 14.15 - Metric system of measurement.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Metric system of measurement. 14.15... COMMERCIAL ORGANIZATIONS Pre-Award Requirements § 14.15 Metric system of measurement. The Metric Conversion... activities. Metric implementation may take longer where the use of the system is initially impractical or...

20 CFR 435.15 - Metric system of measurement.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 20 Employees' Benefits 2 2012-04-01 2012-04-01 false Metric system of measurement. 435.15 Section..., AND COMMERCIAL ORGANIZATIONS Pre-Award Requirements § 435.15 Metric system of measurement. The Metric... metric system is the preferred measurement system for U.S. trade and commerce. The Act requires each...

20 CFR 435.15 - Metric system of measurement.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 20 Employees' Benefits 2 2014-04-01 2014-04-01 false Metric system of measurement. 435.15 Section..., AND COMMERCIAL ORGANIZATIONS Pre-Award Requirements § 435.15 Metric system of measurement. The Metric... metric system is the preferred measurement system for U.S. trade and commerce. The Act requires each...

15 CFR 14.15 - Metric system of measurement.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 15 Commerce and Foreign Trade 1 2012-01-01 2012-01-01 false Metric system of measurement. 14.15... COMMERCIAL ORGANIZATIONS Pre-Award Requirements § 14.15 Metric system of measurement. The Metric Conversion... activities. Metric implementation may take longer where the use of the system is initially impractical or...

Estimated work ability in warm outdoor environments depends on the chosen heat stress assessment metric

NASA Astrophysics Data System (ADS)

Bröde, Peter; Fiala, Dusan; Lemke, Bruno; Kjellstrom, Tord

2018-03-01

With a view to occupational effects of climate change, we performed a simulation study on the influence of different heat stress assessment metrics on estimated workability (WA) of labour in warm outdoor environments. Whole-day shifts with varying workloads were simulated using as input meteorological records for the hottest month from four cities with prevailing hot (Dallas, New Delhi) or warm-humid conditions (Managua, Osaka), respectively. In addition, we considered the effects of adaptive strategies like shielding against solar radiation and different work-rest schedules assuming an acclimated person wearing light work clothes (0.6 clo). We assessed WA according to Wet Bulb Globe Temperature (WBGT) by means of an empirical relation of worker performance from field studies (Hothaps), and as allowed work hours using safety threshold limits proposed by the corresponding standards. Using the physiological models Predicted Heat Strain (PHS) and Universal Thermal Climate Index (UTCI)-Fiala, we calculated WA as the percentage of working hours with body core temperature and cumulated sweat loss below standard limits (38 °C and 7.5% of body weight, respectively) recommended by ISO 7933 and below conservative (38 °C; 3%) and liberal (38.2 °C; 7.5%) limits in comparison. ANOVA results showed that the different metrics, workload, time of day and climate type determined the largest part of WA variance. WBGT-based metrics were highly correlated and indicated slightly more constrained WA for moderate workload, but were less restrictive with high workload and for afternoon work hours compared to PHS and UTCI-Fiala. Though PHS showed unrealistic dynamic responses to rest from work compared to UTCI-Fiala, differences in WA assessed by the physiological models largely depended on the applied limit criteria. In conclusion, our study showed that the choice of the heat stress assessment metric impacts notably on the estimated WA. Whereas PHS and UTCI-Fiala can account for

Conversion to the Metric System

ERIC Educational Resources Information Center

Crunkilton, John C.; Lee, Jasper S.

1974-01-01

The authors discuss background information about the metric system and explore the effect of metrication of agriculture in areas such as equipment calibration, chemical measurement, and marketing of agricultural products. Suggestions are given for possible leadership roles and approaches that agricultural education might take in converting to the…

Automating Software Design Metrics.

DTIC Science & Technology

1984-02-01

INTRODUCTION 1 ", ... 0..1 1.2 HISTORICAL PERSPECTIVE High quality software is of interest to both the software engineering com- munity and its users. As...contributions of many other software engineering efforts, most notably [MCC 77] and [Boe 83b], which have defined and refined a framework for quantifying...AUTOMATION OF DESIGN METRICS Software metrics can be useful within the context of an integrated soft- ware engineering environment. The purpose of this

ST-intuitionistic fuzzy metric space with properties

NASA Astrophysics Data System (ADS)

Arora, Sahil; Kumar, Tanuj

2017-07-01

In this paper, we define ST-intuitionistic fuzzy metric space and the notion of convergence and completeness properties of cauchy sequences is studied. Further, we prove some properties of ST-intuitionistic fuzzy metric space. Finally, we introduce the concept of symmetric ST Intuitionistic Fuzzy metric space.

14 CFR 1274.206 - Metric Conversion Act.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 5 2011-01-01 2010-01-01 true Metric Conversion Act. 1274.206 Section 1274.206 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION COOPERATIVE AGREEMENTS WITH COMMERCIAL FIRMS Pre-Award Requirements § 1274.206 Metric Conversion Act. The Metric Conversion Act, as...

Comparing alternative and traditional dissemination metrics in medical education.

PubMed

Amath, Aysah; Ambacher, Kristin; Leddy, John J; Wood, Timothy J; Ramnanan, Christopher J

2017-09-01

The impact of academic scholarship has traditionally been measured using citation-based metrics. However, citations may not be the only measure of impact. In recent years, other platforms (e.g. Twitter) have provided new tools for promoting scholarship to both academic and non-academic audiences. Alternative metrics (altmetrics) can capture non-traditional dissemination data such as attention generated on social media platforms. The aims of this exploratory study were to characterise the relationships among altmetrics, access counts and citations in an international and pre-eminent medical education journal, and to clarify the roles of these metrics in assessing the impact of medical education academic scholarship. A database study was performed (September 2015) for all papers published in Medical Education in 2012 (n = 236) and 2013 (n = 246). Citation, altmetric and access (HTML views and PDF downloads) data were obtained from Scopus, the Altmetric Bookmarklet tool and the journal Medical Education, respectively. Pearson coefficients (r-values) between metrics of interest were then determined. Twitter and Mendeley (an academic bibliography tool) were the only altmetric-tracked platforms frequently (> 50%) utilised in the dissemination of articles. Altmetric scores (composite measures of all online attention) were driven by Twitter mentions. For short and full-length articles in 2012 and 2013, both access counts and citation counts were most strongly correlated with one another, as well as with Mendeley downloads. By comparison, Twitter metrics and altmetric scores demonstrated weak to moderate correlations with both access and citation counts. Whereas most altmetrics showed limited correlations with readership (access counts) and impact (citations), Mendeley downloads correlated strongly with both readership and impact indices for articles published in the journal Medical Education and may therefore have potential use that is complementary to that of citations in

Metrical assessment of cutmarks on bone: is size important?

PubMed

Cerutti, E; Magli, F; Porta, D; Gibelli, D; Cattaneo, C

2014-07-01

Extrapolating type of blade from a bone lesion has always been a challenge for forensic anthropologists: literature has mainly focused on the morphological characteristics of sharp force lesions, whereas scarce indications are available concerning the metrical assessment of cut marks and their correlation with the size of blade. The present study aims at verifying whether it is possible to reconstruct the metrical characteristics of the blade from the measurements taken from the lesion. Eleven blades with different thickness, height and shape were used for this study. A metallic structure was built, in order to simulate incised wounds and reiterate hits with the same energy. Perpendicular and angled tests were performed on fragments of pig femurs, in order to produce 110 lesions (10 for each blade). Depth, height and angle were measured and compared with metrical characteristics of each blade. Results showed a wide superimposition of metrical characteristics of width and angle of lesions regardless the type and the orientation of blade: for symmetric blades a high correlation index was observed between the depth of the lesion and the angle of the blade in perpendicular tests (0.89) and between the angle of lesion and the height of the blade in angled tests (-0.76); for asymmetric blades in both the tests a high correlation was observed between the angle of the blade and angle and width of the lesion (respectively 0.90 and 0.76 for perpendicular tests, and 0.80 and 0.90 for angled ones). This study provides interesting data concerning the interpretation of cutmarks on bone and suggests caution in assessing the size of weapons from the metrical measurements of lesions. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Decomposition-based transfer distance metric learning for image classification.

PubMed

Luo, Yong; Liu, Tongliang; Tao, Dacheng; Xu, Chao

2014-09-01

Distance metric learning (DML) is a critical factor for image analysis and pattern recognition. To learn a robust distance metric for a target task, we need abundant side information (i.e., the similarity/dissimilarity pairwise constraints over the labeled data), which is usually unavailable in practice due to the high labeling cost. This paper considers the transfer learning setting by exploiting the large quantity of side information from certain related, but different source tasks to help with target metric learning (with only a little side information). The state-of-the-art metric learning algorithms usually fail in this setting because the data distributions of the source task and target task are often quite different. We address this problem by assuming that the target distance metric lies in the space spanned by the eigenvectors of the source metrics (or other randomly generated bases). The target metric is represented as a combination of the base metrics, which are computed using the decomposed components of the source metrics (or simply a set of random bases); we call the proposed method, decomposition-based transfer DML (DTDML). In particular, DTDML learns a sparse combination of the base metrics to construct the target metric by forcing the target metric to be close to an integration of the source metrics. The main advantage of the proposed method compared with existing transfer metric learning approaches is that we directly learn the base metric coefficients instead of the target metric. To this end, far fewer variables need to be learned. We therefore obtain more reliable solutions given the limited side information and the optimization tends to be faster. Experiments on the popular handwritten image (digit, letter) classification and challenge natural image annotation tasks demonstrate the effectiveness of the proposed method.

22 CFR 518.15 - Metric system of measurement.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 22 Foreign Relations 2 2014-04-01 2014-04-01 false Metric system of measurement. 518.15 Section... ORGANIZATIONS Pre-Award Requirements § 518.15 Metric system of measurement. The Metric Conversion Act, as amended by the Omnibus Trade and Competitiveness Act (15 U.S.C. 205), declares that the metric system is...

2 CFR 215.15 - Metric system of measurement.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 2 Grants and Agreements 1 2013-01-01 2013-01-01 false Metric system of measurement. 215.15 Section... ORGANIZATIONS (OMB CIRCULAR A-110) Pre-Award Requirements § 215.15 Metric system of measurement. The Metric... metric system is the preferred measurement system for U.S. trade and commerce. The Act requires each...

2 CFR 215.15 - Metric system of measurement.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 2 Grants and Agreements 1 2012-01-01 2012-01-01 false Metric system of measurement. 215.15 Section... ORGANIZATIONS (OMB CIRCULAR A-110) Pre-Award Requirements § 215.15 Metric system of measurement. The Metric... metric system is the preferred measurement system for U.S. trade and commerce. The Act requires each...

43 CFR 12.915 - Metric system of measurement.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 43 Public Lands: Interior 1 2011-10-01 2011-10-01 false Metric system of measurement. 12.915... Requirements § 12.915 Metric system of measurement. The Metric Conversion Act, as amended by the Omnibus Trade and Competitiveness Act (15 U.S.C. 205) declares that the metric system is the preferred measurement...

43 CFR 12.915 - Metric system of measurement.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 43 Public Lands: Interior 1 2013-10-01 2013-10-01 false Metric system of measurement. 12.915... Requirements § 12.915 Metric system of measurement. The Metric Conversion Act, as amended by the Omnibus Trade and Competitiveness Act (15 U.S.C. 205) declares that the metric system is the preferred measurement...

43 CFR 12.915 - Metric system of measurement.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 43 Public Lands: Interior 1 2012-10-01 2011-10-01 true Metric system of measurement. 12.915... Requirements § 12.915 Metric system of measurement. The Metric Conversion Act, as amended by the Omnibus Trade and Competitiveness Act (15 U.S.C. 205) declares that the metric system is the preferred measurement...

43 CFR 12.915 - Metric system of measurement.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 43 Public Lands: Interior 1 2014-10-01 2014-10-01 false Metric system of measurement. 12.915... Requirements § 12.915 Metric system of measurement. The Metric Conversion Act, as amended by the Omnibus Trade and Competitiveness Act (15 U.S.C. 205) declares that the metric system is the preferred measurement...

Information on the metric system and related fields

NASA Technical Reports Server (NTRS)

Lange, E.

1976-01-01

This document contains about 7,600 references on the metric system and conversion to the metric system. These references include all known documents on the metric system as of December 1975, the month of enactment of the Metric Conversion Act of 1975. This bibliography includes books, reports, articles, presentations, periodicals, legislation, motion pictures, TV series, film strips, slides, posters, wall charts, education and training courses, addresses for information, and sources for metric materials and services. A comprehensive index is provided.

Highway-rail intersection crash taxonomy for connected vehicle safety research

DOT National Transportation Integrated Search

2015-05-01

This report characterizes the frequency, severity, and costs of highway-rail intersection (HRI) collisions, and the estimated potential reductions in these metrics resulting from the implementation of Connected Vehicle HRI safety applications. Multip...

Numerical distance effect size is a poor metric of approximate number system acuity.

PubMed

Chesney, Dana

2018-04-12

Individual differences in the ability to compare and evaluate nonsymbolic numerical magnitudes-approximate number system (ANS) acuity-are emerging as an important predictor in many research areas. Unfortunately, recent empirical studies have called into question whether a historically common ANS-acuity metric-the size of the numerical distance effect (NDE size)-is an effective measure of ANS acuity. NDE size has been shown to frequently yield divergent results from other ANS-acuity metrics. Given these concerns and the measure's past popularity, it behooves us to question whether the use of NDE size as an ANS-acuity metric is theoretically supported. This study seeks to address this gap in the literature by using modeling to test the basic assumption underpinning use of NDE size as an ANS-acuity metric: that larger NDE size indicates poorer ANS acuity. This assumption did not hold up under test. Results demonstrate that the theoretically ideal relationship between NDE size and ANS acuity is not linear, but rather resembles an inverted J-shaped distribution, with the inflection points varying based on precise NDE task methodology. Thus, depending on specific methodology and the distribution of ANS acuity in the tested population, positive, negative, or null correlations between NDE size and ANS acuity could be predicted. Moreover, peak NDE sizes would be found for near-average ANS acuities on common NDE tasks. This indicates that NDE size has limited and inconsistent utility as an ANS-acuity metric. Past results should be interpreted on a case-by-case basis, considering both specifics of the NDE task and expected ANS acuity of the sampled population.

Foresters' Metric Conversions program (version 1.0). [Computer program

Treesearch

Jefferson A. Palmer

1999-01-01

The conversion of scientific measurements has become commonplace in the fields of - engineering, research, and forestry. Foresters? Metric Conversions is a Windows-based computer program that quickly converts user-defined measurements from English to metric and from metric to English. Foresters? Metric Conversions was derived from the publication "Metric...

Preparing for a Metric America

ERIC Educational Resources Information Center

Willenbrock, F. Karl

1975-01-01

In this speech before the Sixtieth National Conference on Weights and Measures, the Director of the Institute for Applied Technology, National Bureau of Standards, presented his view of the imminent conversion to the metric system, outlined some issues related to metrication, and announced appointments related to the change-over. (SD)

NATIONAL LANDSCAPE METRICS BROWSER (V1.0)

EPA Science Inventory

This metric browser website describes and displays wall-to-wall landscape metrics that have been calculated for the entire conterminous U.S. The intent is to provide the user with an overview of the nature and utility of this landscape metric data set. The land cover and pattern ...

29 CFR 95.15 - Metric system of measurement.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 1 2013-07-01 2013-07-01 false Metric system of measurement. 95.15 Section 95.15 Labor... Requirements § 95.15 Metric system of measurement. The Metric Conversion Act, as amended by the Omnibus Trade and Competitiveness Act (15 U.S.C. 205), declares that the metric system is the preferred measurement...

49 CFR 19.15 - Metric system of measurement.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false Metric system of measurement. 19.15 Section 19.15... Requirements § 19.15 Metric system of measurement. The Metric Conversion Act, as amended by the Omnibus Trade and Competitiveness Act (15 U.S.C. 205), declares that the metric system is the preferred measurement...

34 CFR 74.15 - Metric system of measurement.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 34 Education 1 2012-07-01 2012-07-01 false Metric system of measurement. 74.15 Section 74.15... Metric system of measurement. The Metric Conversion Act, as amended by the Omnibus Trade and Competitiveness Act (15 U.S.C. 205) declares that the metric system is the preferred measurement system for U.S...

34 CFR 74.15 - Metric system of measurement.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 34 Education 1 2011-07-01 2011-07-01 false Metric system of measurement. 74.15 Section 74.15... Metric system of measurement. The Metric Conversion Act, as amended by the Omnibus Trade and Competitiveness Act (15 U.S.C. 205) declares that the metric system is the preferred measurement system for U.S...

49 CFR 19.15 - Metric system of measurement.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 1 2011-10-01 2011-10-01 false Metric system of measurement. 19.15 Section 19.15... Requirements § 19.15 Metric system of measurement. The Metric Conversion Act, as amended by the Omnibus Trade and Competitiveness Act (15 U.S.C. 205), declares that the metric system is the preferred measurement...

29 CFR 95.15 - Metric system of measurement.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 1 2014-07-01 2013-07-01 true Metric system of measurement. 95.15 Section 95.15 Labor... Requirements § 95.15 Metric system of measurement. The Metric Conversion Act, as amended by the Omnibus Trade and Competitiveness Act (15 U.S.C. 205), declares that the metric system is the preferred measurement...

14 CFR 1260.115 - Metric system of measurement.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 5 2013-01-01 2013-01-01 false Metric system of measurement. 1260.115....115 Metric system of measurement. The Metric Conversion Act, as amended by the Omnibus Trade and Competitiveness Act (15 U.S.C. 205) declares that the metric system is the preferred measurement system for U.S...

22 CFR 518.15 - Metric system of measurement.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 22 Foreign Relations 2 2012-04-01 2009-04-01 true Metric system of measurement. 518.15 Section 518... Pre-Award Requirements § 518.15 Metric system of measurement. The Metric Conversion Act, as amended by the Omnibus Trade and Competitiveness Act (15 U.S.C. 205), declares that the metric system is the...

49 CFR 19.15 - Metric system of measurement.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 1 2012-10-01 2012-10-01 false Metric system of measurement. 19.15 Section 19.15... Requirements § 19.15 Metric system of measurement. The Metric Conversion Act, as amended by the Omnibus Trade and Competitiveness Act (15 U.S.C. 205), declares that the metric system is the preferred measurement...

29 CFR 95.15 - Metric system of measurement.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 1 2012-07-01 2012-07-01 false Metric system of measurement. 95.15 Section 95.15 Labor... Requirements § 95.15 Metric system of measurement. The Metric Conversion Act, as amended by the Omnibus Trade and Competitiveness Act (15 U.S.C. 205), declares that the metric system is the preferred measurement...

34 CFR 74.15 - Metric system of measurement.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 1 2010-07-01 2010-07-01 false Metric system of measurement. 74.15 Section 74.15... Metric system of measurement. The Metric Conversion Act, as amended by the Omnibus Trade and Competitiveness Act (15 U.S.C. 205) declares that the metric system is the preferred measurement system for U.S...

29 CFR 95.15 - Metric system of measurement.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 1 2010-07-01 2010-07-01 true Metric system of measurement. 95.15 Section 95.15 Labor... Requirements § 95.15 Metric system of measurement. The Metric Conversion Act, as amended by the Omnibus Trade and Competitiveness Act (15 U.S.C. 205), declares that the metric system is the preferred measurement...

49 CFR 19.15 - Metric system of measurement.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 1 2014-10-01 2014-10-01 false Metric system of measurement. 19.15 Section 19.15... Requirements § 19.15 Metric system of measurement. The Metric Conversion Act, as amended by the Omnibus Trade and Competitiveness Act (15 U.S.C. 205), declares that the metric system is the preferred measurement...

34 CFR 74.15 - Metric system of measurement.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 34 Education 1 2013-07-01 2013-07-01 false Metric system of measurement. 74.15 Section 74.15... Metric system of measurement. The Metric Conversion Act, as amended by the Omnibus Trade and Competitiveness Act (15 U.S.C. 205) declares that the metric system is the preferred measurement system for U.S...

14 CFR 1260.115 - Metric system of measurement.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 5 2011-01-01 2010-01-01 true Metric system of measurement. 1260.115....115 Metric system of measurement. The Metric Conversion Act, as amended by the Omnibus Trade and Competitiveness Act (15 U.S.C. 205) declares that the metric system is the preferred measurement system for U.S...

22 CFR 518.15 - Metric system of measurement.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 22 Foreign Relations 2 2010-04-01 2010-04-01 true Metric system of measurement. 518.15 Section 518... Pre-Award Requirements § 518.15 Metric system of measurement. The Metric Conversion Act, as amended by the Omnibus Trade and Competitiveness Act (15 U.S.C. 205), declares that the metric system is the...

49 CFR 19.15 - Metric system of measurement.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 1 2013-10-01 2013-10-01 false Metric system of measurement. 19.15 Section 19.15... Requirements § 19.15 Metric system of measurement. The Metric Conversion Act, as amended by the Omnibus Trade and Competitiveness Act (15 U.S.C. 205), declares that the metric system is the preferred measurement...

34 CFR 74.15 - Metric system of measurement.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 34 Education 1 2014-07-01 2014-07-01 false Metric system of measurement. 74.15 Section 74.15... Metric system of measurement. The Metric Conversion Act, as amended by the Omnibus Trade and Competitiveness Act (15 U.S.C. 205) declares that the metric system is the preferred measurement system for U.S...

14 CFR 1260.115 - Metric system of measurement.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 5 2012-01-01 2012-01-01 false Metric system of measurement. 1260.115....115 Metric system of measurement. The Metric Conversion Act, as amended by the Omnibus Trade and Competitiveness Act (15 U.S.C. 205) declares that the metric system is the preferred measurement system for U.S...

22 CFR 518.15 - Metric system of measurement.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 22 Foreign Relations 2 2013-04-01 2009-04-01 true Metric system of measurement. 518.15 Section 518... Pre-Award Requirements § 518.15 Metric system of measurement. The Metric Conversion Act, as amended by the Omnibus Trade and Competitiveness Act (15 U.S.C. 205), declares that the metric system is the...

29 CFR 95.15 - Metric system of measurement.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 1 2011-07-01 2011-07-01 false Metric system of measurement. 95.15 Section 95.15 Labor... Requirements § 95.15 Metric system of measurement. The Metric Conversion Act, as amended by the Omnibus Trade and Competitiveness Act (15 U.S.C. 205), declares that the metric system is the preferred measurement...

2 CFR 215.15 - Metric system of measurement.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 2 Grants and Agreements 1 2011-01-01 2011-01-01 false Metric system of measurement. 215.15 Section... ORGANIZATIONS (OMB CIRCULAR A-110) Pre-Award Requirements § 215.15 Metric system of measurement. The Metric... metric system is the preferred measurement system for U.S. trade and commerce. The Act requires each...

22 CFR 518.15 - Metric system of measurement.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 22 Foreign Relations 2 2011-04-01 2009-04-01 true Metric system of measurement. 518.15 Section 518... Pre-Award Requirements § 518.15 Metric system of measurement. The Metric Conversion Act, as amended by the Omnibus Trade and Competitiveness Act (15 U.S.C. 205), declares that the metric system is the...

Metric variation and sexual dimorphism in the dentition of Ouranopithecus macedoniensis.

PubMed

Schrein, Caitlin M

2006-04-01

The fossil sample attributed to the late Miocene hominoid taxon Ouranopithecus macedoniensis is characterized by a high degree of dental metric variation. As a result, some researchers support a multiple-species taxonomy for this sample. Other researchers do not think that the sample variation is too great to be accommodated within one species. This study examines variation and sexual dimorphism in mandibular canine and postcanine dental metrics of an Ouranopithecus sample. Bootstrapping (resampling with replacement) of extant hominoid dental metric data is performed to test the hypothesis that the coefficients of variation (CV) and the indices of sexual dimorphism (ISD) of the fossil sample are not significantly different from those of modern great apes. Variation and sexual dimorphism in Ouranopithecus M(1) dimensions were statistically different from those of all extant ape samples; however, most of the dental metrics of Ouranopithecus were neither more variable nor more sexually dimorphic than those of Gorilla and Pongo. Similarly high levels of mandibular molar variation are known to characterize other fossil hominoid species. The Ouranopithecus specimens are morphologically homogeneous and it is probable that all but one specimen included in this study are from a single population. It is unlikely that the sample includes specimens of two sympatric large-bodied hominoid species. For these reasons, a single-species hypothesis is not rejected for the Ouranopithecus macedoniensis material. Correlations between mandibular first molar tooth size dimorphism and body size dimorphism indicate that O. macedoniensis and other extinct hominoids were more sexually size dimorphic than any living great apes, which suggests that social behaviors and life history profiles of these species may have been different from those of living species.

Evaluation of the Quality of Occupational Health and Safety Management Systems Based on Key Performance Indicators in Certified Organizations.

PubMed

Mohammadfam, Iraj; Kamalinia, Mojtaba; Momeni, Mansour; Golmohammadi, Rostam; Hamidi, Yadollah; Soltanian, Alireza

2017-06-01

Occupational Health and Safety Management Systems are becoming more widespread in organizations. Consequently, their effectiveness has become a core topic for researchers. This paper evaluates the performance of the Occupational Health and Safety Assessment Series 18001 specification in certified companies in Iran. The evaluation is based on a comparison of specific criteria and indictors related to occupational health and safety management practices in three certified and three noncertified companies. Findings indicate that the performance of certified companies with respect to occupational health and safety management practices is significantly better than that of noncertified companies. Occupational Health and Safety Assessment Series 18001-certified companies have a better level of occupational health and safety; this supports the argument that Occupational Health and Safety Management Systems play an important strategic role in health and safety in the workplace.

The Metric System: America Measures Up. 1979 Edition.

ERIC Educational Resources Information Center

Anderson, Glen; Gallagher, Paul

This training manual is designed to introduce and assist naval personnel in the conversion from the English system of measurement to the metric system of measurement. The book tells what the "move to metrics" is all about, and details why the change to the metric system is necessary. Individual chapters are devoted to how the metric system will…

14 CFR § 1274.206 - Metric Conversion Act.

Code of Federal Regulations, 2014 CFR

2014-01-01

... metric system is the preferred measurement system for U.S. trade and commerce. NASA's policy with respect to the metric measurement system is stated in NPD 8010.2, Use of the Metric System of Measurement in... 14 Aeronautics and Space 5 2014-01-01 2014-01-01 false Metric Conversion Act. § 1274.206 Section...

Selection Metric for Photovoltaic Materials Screening Based on Detailed-Balance Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blank, Beatrix; Kirchartz, Thomas; Lany, Stephan

The success of recently discovered absorber materials for photovoltaic applications has been generating increasing interest in systematic materials screening over the last years. However, the key for a successful materials screening is a suitable selection metric that goes beyond the Shockley-Queisser theory that determines the thermodynamic efficiency limit of an absorber material solely by its band-gap energy. Here, we develop a selection metric to quantify the potential photovoltaic efficiency of a material. Our approach is compatible with detailed balance and applicable in computational and experimental materials screening. We use the complex refractive index to calculate radiative and nonradiative efficiency limitsmore » and the respective optimal thickness in the high mobility limit. We also compare our model to the widely applied selection metric by Yu and Zunger [Phys. Rev. Lett. 108, 068701 (2012)] with respect to their dependence on thickness, internal luminescence quantum efficiency, and refractive index. Finally, the model is applied to complex refractive indices calculated via electronic structure theory.« less

Selection Metric for Photovoltaic Materials Screening Based on Detailed-Balance Analysis

DOE PAGES

Blank, Beatrix; Kirchartz, Thomas; Lany, Stephan; ...

2017-08-31

The success of recently discovered absorber materials for photovoltaic applications has been generating increasing interest in systematic materials screening over the last years. However, the key for a successful materials screening is a suitable selection metric that goes beyond the Shockley-Queisser theory that determines the thermodynamic efficiency limit of an absorber material solely by its band-gap energy. Here, we develop a selection metric to quantify the potential photovoltaic efficiency of a material. Our approach is compatible with detailed balance and applicable in computational and experimental materials screening. We use the complex refractive index to calculate radiative and nonradiative efficiency limitsmore » and the respective optimal thickness in the high mobility limit. We also compare our model to the widely applied selection metric by Yu and Zunger [Phys. Rev. Lett. 108, 068701 (2012)] with respect to their dependence on thickness, internal luminescence quantum efficiency, and refractive index. Finally, the model is applied to complex refractive indices calculated via electronic structure theory.« less

How to Teach Metric Now.

ERIC Educational Resources Information Center

Worcester Public Schools, MA.

This curriculum guide for grades K-6 was prepared to assist teachers and students in learning about the metric system. An introductory section presents a brief history of the metric system and the rationale for introducing it into the schools. Instructional objectives and suggested learning activities are presented for each grade level. The…

Metrics for Hotel and Lodging.

ERIC Educational Resources Information Center

Cooper, Gloria S., Ed.; Magisos, Joel H., Ed.

Designed to meet the job-related metric measurement needs of students interested in hotel and lodging, this instructional package is one of three for the hospitality and recreation occupations cluster, part of a set of 55 packages for metric instruction in different occupations. The package is intended for students who already know the…

Metrics for Small Engine Repair.

ERIC Educational Resources Information Center

Cooper, Gloria S., Ed.; Magisos, Joel H., Ed.

Designed to meet the job-related metric measurement needs of small engine repair students, this instructional package is one of four for the transportation occupations cluster, part of a set of 55 packages for metric instruction in different occupations. The package is intended for students who already know the occupational terminology,…

Metrical Phonology: German Sound System.

ERIC Educational Resources Information Center

Tice, Bradley S.

Metrical phonology, a linguistic process of phonological stress assessment and diagrammatic simplification of sentence and word stress, is discussed as it is found in the English and German languages. The objective is to promote use of metrical phonology as a tool for enhancing instruction in stress patterns in words and sentences, particularly in…

Safety Performance of Airborne Separation: Preliminary Baseline Testing

NASA Technical Reports Server (NTRS)

Consiglio, Maria C.; Hoadley, Sherwood T.; Wing, David J.; Baxley, Brian T.

2007-01-01

The Safety Performance of Airborne Separation (SPAS) study is a suite of Monte Carlo simulation experiments designed to analyze and quantify safety behavior of airborne separation. This paper presents results of preliminary baseline testing. The preliminary baseline scenario is designed to be very challenging, consisting of randomized routes in generic high-density airspace in which all aircraft are constrained to the same flight level. Sustained traffic density is varied from approximately 3 to 15 aircraft per 10,000 square miles, approximating up to about 5 times today s traffic density in a typical sector. Research at high traffic densities and at multiple flight levels are planned within the next two years. Basic safety metrics for aircraft separation are collected and analyzed. During the progression of experiments, various errors, uncertainties, delays, and other variables potentially impacting system safety will be incrementally introduced to analyze the effect on safety of the individual factors as well as their interaction and collective effect. In this paper we report the results of the first experiment that addresses the preliminary baseline condition tested over a range of traffic densities. Early results at five times the typical traffic density in today s NAS indicate that, under the assumptions of this study, airborne separation can be safely performed. In addition, we report on initial observations from an exploration of four additional factors tested at a single traffic density: broadcast surveillance signal interference, extent of intent sharing, pilot delay, and wind prediction error.

A Metric on Phylogenetic Tree Shapes.

PubMed

Colijn, C; Plazzotta, G

2018-01-01

The shapes of evolutionary trees are influenced by the nature of the evolutionary process but comparisons of trees from different processes are hindered by the challenge of completely describing tree shape. We present a full characterization of the shapes of rooted branching trees in a form that lends itself to natural tree comparisons. We use this characterization to define a metric, in the sense of a true distance function, on tree shapes. The metric distinguishes trees from random models known to produce different tree shapes. It separates trees derived from tropical versus USA influenza A sequences, which reflect the differing epidemiology of tropical and seasonal flu. We describe several metrics based on the same core characterization, and illustrate how to extend the metric to incorporate trees' branch lengths or other features such as overall imbalance. Our approach allows us to construct addition and multiplication on trees, and to create a convex metric on tree shapes which formally allows computation of average tree shapes. © The Author(s) 2017. Published by Oxford University Press, on behalf of the Society of Systematic Biologists.

Do metrical incongruities disrupt semantic processing in modern Chinese? An event-related potential study.

PubMed

Lee, Yujun; Liu, Xin; Wang, Xiaoming

2015-09-30

The present study examined the relationship between prosody and semantic processing in the written form of modern Chinese by analysing behavioural data and event-related potential data. By manipulating the number of noun syllables in verb-objection, we compare the dynamic neural mechanisms of the structure bisyllabic verb (V2)+monosyllabic noun (N1) (i.e. V2+N1) with V2+N1 (N2, bisyllabic noun). In Chinese, the rhythmic pattern V2+N1 is considered to be a metrical incongruity, whereas V2+N2 is considered to be a metrical congruity. For example, the verb yunshu (to transport) can be followed by liangshi (cereals). However, if yunshu is followed by liang (cereals), yunshu liang is usually considered to be metrically incongruous. This paper shows that (i) V2+N1 elicited more negative amplitudes than V2+N2 in the 90-170 ms and 450-500 ms windows, which indicates that metrical incongruities affect semantic processing in Chinese, and (ii) the acceptance rate for V2+N1 is significantly lower than that of V2+N2, which implies that metrical incongruities disrupt semantic processing in modern Chinese. These results are in agreement with previous studies. This is the first study to find that metrical incongruities disrupt semantic processing in Chinese. This study provides convergent evidence that metrical congruities facilitate semantic processing, whereas metrical incongruities disrupt semantic processing. Video abstract available (Supplemental digital content 1, http://links.lww.com/WNR/A340).

Launch Vehicle Production and Operations Cost Metrics

NASA Technical Reports Server (NTRS)

Watson, Michael D.; Neeley, James R.; Blackburn, Ruby F.

2014-01-01

Traditionally, launch vehicle cost has been evaluated based on $/Kg to orbit. This metric is calculated based on assumptions not typically met by a specific mission. These assumptions include the specified orbit whether Low Earth Orbit (LEO), Geostationary Earth Orbit (GEO), or both. The metric also assumes the payload utilizes the full lift mass of the launch vehicle, which is rarely true even with secondary payloads.1,2,3 Other approaches for cost metrics have been evaluated including unit cost of the launch vehicle and an approach to consider the full program production and operations costs.4 Unit cost considers the variable cost of the vehicle and the definition of variable costs are discussed. The full program production and operation costs include both the variable costs and the manufacturing base. This metric also distinguishes operations costs from production costs, including pre-flight operational testing. Operations costs also consider the costs of flight operations, including control center operation and maintenance. Each of these 3 cost metrics show different sensitivities to various aspects of launch vehicle cost drivers. The comparison of these metrics provides the strengths and weaknesses of each yielding an assessment useful for cost metric selection for launch vehicle programs.

Metrics Made Easy: A Classroom Guide - 1978.

ERIC Educational Resources Information Center

Blau, Sharon; And Others

This classroom guide for metric education included a brief rationale and history of metrics, a preliminary metric quiz, a symbol summary, and a list of recommended instructional materials. The guide is comprised primarily of four sections covering the topics of: weight, length, volume, and temperature. Each of these sections contains goals and…

Healthcare waste management practices and safety indicators in Nigeria.

PubMed

Oyekale, Abayomi Samuel; Oyekale, Tolulope Olayemi

2017-09-25

Adequate management of healthcare waste (HCW) is a prerequisite for efficient delivery of healthcare services. In Nigeria, there are several constraints militating against proper management of HCW. This is raising some environmental concerns among stakeholders in the health sector. In this study, we analyzed the practices of HCW management and determinants of risky/safe indices of HCW disposal. The study used the 2013/2014 Service Delivery Indicator (SDI) data that were collected from 2480 healthcare facilities in Nigeria. Descriptive statistics, Principal Component Analysis (PCA) and Ordinary Least Square (OLS) regression were used to analyze the data. The results showed that 52.20% and 38.21% of the sampled healthcare facilities from Cross River and Bauchi states possessed guidelines for HCW management, respectively. Trainings on management of HCW were attended by 67.18% and 53.19% of the healthcare facilities from Cross River and Imo states, respectively. Also, 32.32% and 29.50% of healthcare facilities from rural and urban areas previously sent some of their staff members for trainings on HCW management, respectively. Sharp and non-sharp HCW were burnt in protected pits in 45.40% and 45.36% of all the sampled healthcare facilities, respectively. Incinerators were reported to be functional in only 2.06% of the total healthcare facilities. In Bauchi and Kebbi states, 23.58% and 21.05% of the healthcare facilities respectively burnt sharp HCW without any protection. Using PCA, computed risky indices for disposal of sharp HCW were highest in Bayelsa state (0.3070) and Kebbi state (0.2172), while indices of risky disposal of non-sharp HCW were highest in Bayelsa state (0.2868) and Osun state (0.2652). The OLS results showed that at 5% level of significance, possession of medical waste disposal guidelines, staff trainings on HCW management, traveling hours from the facilities to local headquarters and being located in rural areas significantly influenced indices of

76 FR 18073 - Track Safety Standards; Concrete Crossties

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-01

... metrics would be undesirable and restrict certain fastener assembly designs and capabilities to control... Track Safety Standards Working Group IV. FRA's Approach to Concrete Crossties A. Rail Cant B. Automated... and non-compliant track geometry can cause high- concentrated non-uniform dynamic loading, usually...

The Metrical Foot in Diyari.

ERIC Educational Resources Information Center

Poser, William

1989-01-01

Considers the metrical foot in Diyari, a South Australian Language, and concludes that, on the basis of stress alone, an argument can be made for the constituency of the metrical stress foot under certain theoretical assumptions. This conclusion is reinforced by the occupance in Diyari of other less theory-dependant phenomena. (46 references) (JL)

Degraded visual environment image/video quality metrics

NASA Astrophysics Data System (ADS)

Baumgartner, Dustin D.; Brown, Jeremy B.; Jacobs, Eddie L.; Schachter, Bruce J.

2014-06-01

A number of image quality metrics (IQMs) and video quality metrics (VQMs) have been proposed in the literature for evaluating techniques and systems for mitigating degraded visual environments. Some require both pristine and corrupted imagery. Others require patterned target boards in the scene. None of these metrics relates well to the task of landing a helicopter in conditions such as a brownout dust cloud. We have developed and used a variety of IQMs and VQMs related to the pilot's ability to detect hazards in the scene and to maintain situational awareness. Some of these metrics can be made agnostic to sensor type. Not only are the metrics suitable for evaluating algorithm and sensor variation, they are also suitable for choosing the most cost effective solution to improve operating conditions in degraded visual environments.

A framework for quantification of groundwater dynamics - redundancy and transferability of hydro(geo-)logical metrics

NASA Astrophysics Data System (ADS)

Heudorfer, Benedikt; Haaf, Ezra; Barthel, Roland; Stahl, Kerstin

2017-04-01

A new framework for quantification of groundwater dynamics has been proposed in a companion study (Haaf et al., 2017). In this framework, a number of conceptual aspects of dynamics, such as seasonality, regularity, flashiness or inter-annual forcing, are described, which are then linked to quantitative metrics. Hereby, a large number of possible metrics are readily available from literature, such as Pardé Coefficients, Colwell's Predictability Indices or Base Flow Index. In the present work, we focus on finding multicollinearity and in consequence redundancy among the metrics representing different patterns of dynamics found in groundwater hydrographs. This is done also to verify the categories of dynamics aspects suggested by Haaf et al., 2017. To determine the optimal set of metrics we need to balance the desired minimum number of metrics and the desired maximum descriptive property of the metrics. To do this, a substantial number of candidate metrics are applied to a diverse set of groundwater hydrographs from France, Germany and Austria within the northern alpine and peri-alpine region. By applying Principle Component Analysis (PCA) to the correlation matrix of the metrics, we determine a limited number of relevant metrics that describe the majority of variation in the dataset. The resulting reduced set of metrics comprise an optimized set that can be used to describe the aspects of dynamics that were identified within the groundwater dynamics framework. For some aspects of dynamics a single significant metric could be attributed. Other aspects have a more fuzzy quality that can only be described by an ensemble of metrics and are re-evaluated. The PCA is furthermore applied to groups of groundwater hydrographs containing regimes of similar behaviour in order to explore transferability when applying the metric-based characterization framework to groups of hydrographs from diverse groundwater systems. In conclusion, we identify an optimal number of metrics

Metrics for Mechanics and Other Practical People.

ERIC Educational Resources Information Center

Richmond, Doug

This handbook on the metric system is printed in a large type for ease of reading. It includes several tables of often-used facts. A brief background of the metric system is presented, followed by chapters on metric uses with electricity, length, pressure, temperature, threaded fastenings, tools, torque, volume, and weight. Each chapter provides a…

The influence of MCAT and GPA preadmission academic metrics on interview scores.

PubMed

Gay, Steven E; Santen, Sally A; Mangrulkar, Rajesh S; Sisson, Thomas H; Ross, Paula T; Zaidi, Nikki L Bibler

2018-03-01

Medical school admissions interviews are used to assess applicants' nonacademic characteristics as advocated by the Association of American Medical Colleges' Advancing Holistic Review Initiative. The objective of this study is to determine whether academic metrics continue to significantly influence interviewers' scores in holistic processes by blinding interviewers to applicants' undergraduate grade point averages (uGPA) and Medical College Admission Test (MCAT). This study examines academic and demographic predictors of interview scores for two applicant cohorts at the University of Michigan Medical School. In 2012, interviewers were provided applicants' uGPA and MCAT scores; in 2013, these academic metrics were withheld from interviewers' files. Hierarchical regression analysis was conducted to examine the influence of academic and demographic variables on overall cohort interview scores. When interviewers were provided uGPA and MCAT scores, academic metrics explained more variation in interview scores (7.9%) than when interviewers were blinded to these metrics (4.1%). Further analysis showed a statistically significant interaction between cohort and uGPA, indicating that the association between uGPA and interview scores was significantly stronger for the 2012 unblinded cohort compared to the 2013 blinded cohort (β = .573, P < .05). By contrast, MCAT scores had no interactive effects on interviewer scores. While MCAT scores accounted for some variation in interview scores for both cohorts, only access to uGPA significantly influenced interviewers' scores when looking at interaction effects. Withholding academic metrics from interviewers' files may promote assessment of nonacademic characteristics independently from academic metrics.

Climate Classification is an Important Factor in ­Assessing Hospital Performance Metrics

NASA Astrophysics Data System (ADS)

Boland, M. R.; Parhi, P.; Gentine, P.; Tatonetti, N. P.

2017-12-01

Context/Purpose: Climate is a known modulator of disease, but its impact on hospital performance metrics remains unstudied. Methods: We assess the relationship between Köppen-Geiger climate classification and hospital performance metrics, specifically 30-day mortality, as reported in Hospital Compare, and collected for the period July 2013 through June 2014 (7/1/2013 - 06/30/2014). A hospital-level multivariate linear regression analysis was performed while controlling for known socioeconomic factors to explore the relationship between all-cause mortality and climate. Hospital performance scores were obtained from 4,524 hospitals belonging to 15 distinct Köppen-Geiger climates and 2,373 unique counties. Results: Model results revealed that hospital performance metrics for mortality showed significant climate dependence (p<0.001) after adjusting for socioeconomic factors. Interpretation: Currently, hospitals are reimbursed by Governmental agencies using 30-day mortality rates along with 30-day readmission rates. These metrics allow Government agencies to rank hospitals according to their `performance' along these metrics. Various socioeconomic factors are taken into consideration when determining individual hospitals performance. However, no climate-based adjustment is made within the existing framework. Our results indicate that climate-based variability in 30-day mortality rates does exist even after socioeconomic confounder adjustment. Use of standardized high-level climate classification systems (such as Koppen-Geiger) would be useful to incorporate in future metrics. Conclusion: Climate is a significant factor in evaluating hospital 30-day mortality rates. These results demonstrate that climate classification is an important factor when comparing hospital performance across the United States.

Elementary Metric Curriculum - Project T.I.M.E. (Timely Implementation of Metric Education). Part II.

ERIC Educational Resources Information Center

Community School District 18, Brooklyn, NY.

This is the second part of a two-part teacher's manual for an ISS-based elementary school course in the metric system. Behavioral objectives and student activities are included. Topics include: (1) capacity; (2) calculation of volume and surface area of cylinders and cones; (3) mass; (4) temperature; and (5) metric conversions. (BB)

Evaluating Modeled Impact Metrics for Human Health, Agriculture Growth, and Near-Term Climate

NASA Astrophysics Data System (ADS)

Seltzer, K. M.; Shindell, D. T.; Faluvegi, G.; Murray, L. T.

2017-12-01

Simulated metrics that assess impacts on human health, agriculture growth, and near-term climate were evaluated using ground-based and satellite observations. The NASA GISS ModelE2 and GEOS-Chem models were used to simulate the near-present chemistry of the atmosphere. A suite of simulations that varied by model, meteorology, horizontal resolution, emissions inventory, and emissions year were performed, enabling an analysis of metric sensitivities to various model components. All simulations utilized consistent anthropogenic global emissions inventories (ECLIPSE V5a or CEDS), and an evaluation of simulated results were carried out for 2004-2006 and 2009-2011 over the United States and 2014-2015 over China. Results for O3- and PM2.5-based metrics featured minor differences due to the model resolutions considered here (2.0° × 2.5° and 0.5° × 0.666°) and model, meteorology, and emissions inventory each played larger roles in variances. Surface metrics related to O3 were consistently high biased, though to varying degrees, demonstrating the need to evaluate particular modeling frameworks before O3 impacts are quantified. Surface metrics related to PM2.5 were diverse, indicating that a multimodel mean with robust results are valuable tools in predicting PM2.5-related impacts. Oftentimes, the configuration that captured the change of a metric best over time differed from the configuration that captured the magnitude of the same metric best, demonstrating the challenge in skillfully simulating impacts. These results highlight the strengths and weaknesses of these models in simulating impact metrics related to air quality and near-term climate. With such information, the reliability of historical and future simulations can be better understood.

Metrication: A Guide for Consumers.

ERIC Educational Resources Information Center

Consumer and Corporate Affairs Dept., Ottawa (Ontario).

The widespread use of the metric system by most of the major industrial powers of the world has prompted the Canadian government to investigate and consider use of the system. This booklet was developed to aid the consuming public in Canada in gaining some knowledge of metrication and how its application would affect their present economy.…

Metric Supplement to Technical Drawing.

ERIC Educational Resources Information Center

Henschel, Mark

This manual is intended for use in training persons whose vocations involve technical drawing to use the metric system of measurement. It could be used in a short course designed for that purpose or for individual study. The manual begins with a brief discussion of the rationale for conversion to the metric system. It then provides a…

High resolution metric imaging payload

NASA Astrophysics Data System (ADS)

Delclaud, Y.

2017-11-01

Alcatel Space Industries has become Europe's leader in the field of high and very high resolution optical payloads, in the frame work of earth observation system able to provide military government with metric images from space. This leadership allowed ALCATEL to propose for the export market, within a French collaboration frame, a complete space based system for metric observation.

The Role and Quality of Software Safety in the NASA Constellation Program

NASA Technical Reports Server (NTRS)

Layman, Lucas; Basili, Victor R.; Zelkowitz, Marvin V.

2010-01-01

In this study, we examine software safety risk in the early design phase of the NASA Constellation spaceflight program. Obtaining an accurate, program-wide picture of software safety risk is difficult across multiple, independently-developing systems. We leverage one source of safety information, hazard analysis, to provide NASA quality assurance managers with information regarding the ongoing state of software safety across the program. The goal of this research is two-fold: 1) to quantify the relative importance of software with respect to system safety; and 2) to quantify the level of risk presented by software in the hazard analysis. We examined 154 hazard reports created during the preliminary design phase of three major flight hardware systems within the Constellation program. To quantify the importance of software, we collected metrics based on the number of software-related causes and controls of hazardous conditions. To quantify the level of risk presented by software, we created a metric scheme to measure the specificity of these software causes. We found that from 49-70% of hazardous conditions in the three systems could be caused by software or software was involved in the prevention of the hazardous condition. We also found that 12-17% of the 2013 hazard causes involved software, and that 23-29% of all causes had a software control. Furthermore, 10-12% of all controls were software-based. There is potential for inaccuracy in these counts, however, as software causes are not consistently scoped, and the presence of software in a cause or control is not always clear. The application of our software specificity metrics also identified risks in the hazard reporting process. In particular, we found a number of traceability risks in the hazard reports may impede verification of software and system safety.

77 FR 72435 - Pipeline Safety: Using Meaningful Metrics in Conducting Integrity Management Program Evaluations

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-05

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No... Evaluations AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION: Notice... improve performance. For gas transmission pipelines, Sec. Sec. 192.911(i) and 192.945 define the...

Do Your Students Measure Up Metrically?

ERIC Educational Resources Information Center

Taylor, P. Mark; Simms, Ken; Kim, Ok-Kyeong; Reys, Robert E.

2001-01-01

Examines released metric items from the Third International Mathematics and Science Study (TIMSS) and the 3rd and 4th grade results. Recommends refocusing instruction on the metric system to improve student performance in measurement. (KHR)

On metrics and super-Riemann surfaces

NASA Astrophysics Data System (ADS)

Hodgkin, Luke

1987-08-01

It is shown that any super-Riemann surface M admits a large space of metrics (in a rather basic sense); while if M is of compact genus g type, g>1, M admits a unique metric whose lift to the universal cover is superconformally equivalent to the standard (Baranov-Shvarts) metric on the super-half plane. This explains the relation between the different methods of calculation of the upper Teichmüller space by the author (using arbitrary superconformal transformations) and Crane and Rabin (using only isometries).

Automating the Generation of Heterogeneous Aviation Safety Cases

NASA Technical Reports Server (NTRS)

Denney, Ewen W.; Pai, Ganesh J.; Pohl, Josef M.

2012-01-01

A safety case is a structured argument, supported by a body of evidence, which provides a convincing and valid justification that a system is acceptably safe for a given application in a given operating environment. This report describes the development of a fragment of a preliminary safety case for the Swift Unmanned Aircraft System. The construction of the safety case fragment consists of two parts: a manually constructed system-level case, and an automatically constructed lower-level case, generated from formal proof of safety-relevant correctness properties. We provide a detailed discussion of the safety considerations for the target system, emphasizing the heterogeneity of sources of safety-relevant information, and use a hazard analysis to derive safety requirements, including formal requirements. We evaluate the safety case using three classes of metrics for measuring degrees of coverage, automation, and understandability. We then present our preliminary conclusions and make suggestions for future work.

Biodiversity comparison among phylogenetic diversity metrics and between three North American prairies1

PubMed Central

Kellar, P. Roxanne (Steele); Ahrendsen, Dakota L.; Aust, Shelly K.; Jones, Amanda R.; Pires, J. Chris

2015-01-01

Protection of Earth’s ecosystems requires identification of geographical areas of greatest biodiversity. Assessment of biodiversity begins with knowledge of the evolutionary histories of species in a geographic area. Multiple phylogenetic diversity (PD) metrics have been developed to describe biodiversity beyond species counts, but sufficient empirical studies, particularly at fine phylogenetic scales, have not been conducted to provide conservation planners with evidence for incorporating PD metrics into selection of priority regions. We review notable studies that are contributing to a growing database of empirical results, we report on the effect of using high-throughput sequencing to estimate the phylogenies used to calculate PD metrics, and we discuss difficulties in selecting appropriate diversity indices. We focused on two of the most speciose angiosperm families in prairies—Asteraceae and Fabaceae—and compared 12 PD metrics and four traditional measures of biodiversity between three North American prairie sites. The varying results from the literature and from the current data reveal the wide range of applications of PD metrics and the necessity for many more empirical studies. The accumulation of results from further investigations will eventually lead to a scientific understanding upon which conservation planners can make informed decisions about where to apply limited preservation funds. PMID:26191461

On the new metrics for IMRT QA verification.

PubMed

Garcia-Romero, Alejandro; Hernandez-Vitoria, Araceli; Millan-Cebrian, Esther; Alba-Escorihuela, Veronica; Serrano-Zabaleta, Sonia; Ortega-Pardina, Pablo

2016-11-01

The aim of this work is to search for new metrics that could give more reliable acceptance/rejection criteria on the IMRT verification process and to offer solutions to the discrepancies found among different conventional metrics. Therefore, besides conventional metrics, new ones are proposed and evaluated with new tools to find correlations among them. These new metrics are based on the processing of the dose-volume histogram information, evaluating the absorbed dose differences, the dose constraint fulfillment, or modified biomathematical treatment outcome models such as tumor control probability (TCP) and normal tissue complication probability (NTCP). An additional purpose is to establish whether the new metrics yield the same acceptance/rejection plan distribution as the conventional ones. Fifty eight treatment plans concerning several patient locations are analyzed. All of them were verified prior to the treatment, using conventional metrics, and retrospectively after the treatment with the new metrics. These new metrics include the definition of three continuous functions, based on dose-volume histograms resulting from measurements evaluated with a reconstructed dose system and also with a Monte Carlo redundant calculation. The 3D gamma function for every volume of interest is also calculated. The information is also processed to obtain ΔTCP or ΔNTCP for the considered volumes of interest. These biomathematical treatment outcome models have been modified to increase their sensitivity to dose changes. A robustness index from a radiobiological point of view is defined to classify plans in robustness against dose changes. Dose difference metrics can be condensed in a single parameter: the dose difference global function, with an optimal cutoff that can be determined from a receiver operating characteristics (ROC) analysis of the metric. It is not always possible to correlate differences in biomathematical treatment outcome models with dose difference metrics

Going the Extra Kilometer for Metrics.

ERIC Educational Resources Information Center

Thompson, Michael F.; Lindbeck, John R.

1979-01-01

Reviews the status and advantages of the metric system's implementation in the U.S. Describes metrication already accomplished and conversions planned in the near future. The role for vocational education in this process is pointed out. (MF)

Classifying indicators of quality: a collaboration between Dutch and English regulators.

PubMed

Mears, Alex; Vesseur, Jan; Hamblin, Richard; Long, Paul; Den Ouden, Lya

2011-12-01

Many approaches to measuring quality in healthcare exist, generally employing indicators or metrics. While there are important differences, most of these approaches share three key areas of measurement: safety, effectiveness and patient experience. The European Partnership for Supervisory Organisations in Health Services and Social Care (EPSO) exists as a working group and discussion forum for European regulators. This group undertook to identify a common framework within which European approaches to indicators could be compared. A framework was developed to classify indicators, using four sets of criteria: conceptualization of quality, Donabedian definition (structure, process, outcome), data type (derivable, collectable from routine sources, special collections, samples) and data use (judgement (singular or part of framework) benchmarking, risk assessment). Indicators from English and Dutch hospital measurement programmes were put into the framework, showing areas of agreement and levels of comparability. In the first instance, results are only illustrative. The EPSO has been a powerful driver for undertaking cross-European research, and this project is the first of many to take advantage of the access to international expertize. It has shown that through development of a framework that deconstructs national indicators, commonalities can be identified. Future work will attempt to incorporate other nations' indicators, and attempt cross-national comparison.

Machine learning classifier using abnormal brain network topological metrics in major depressive disorder.

PubMed

Guo, Hao; Cao, Xiaohua; Liu, Zhifen; Li, Haifang; Chen, Junjie; Zhang, Kerang

2012-12-05

Resting state functional brain networks have been widely studied in brain disease research. However, it is currently unclear whether abnormal resting state functional brain network metrics can be used with machine learning for the classification of brain diseases. Resting state functional brain networks were constructed for 28 healthy controls and 38 major depressive disorder patients by thresholding partial correlation matrices of 90 regions. Three nodal metrics were calculated using graph theory-based approaches. Nonparametric permutation tests were then used for group comparisons of topological metrics, which were used as classified features in six different algorithms. We used statistical significance as the threshold for selecting features and measured the accuracies of six classifiers with different number of features. A sensitivity analysis method was used to evaluate the importance of different features. The result indicated that some of the regions exhibited significantly abnormal nodal centralities, including the limbic system, basal ganglia, medial temporal, and prefrontal regions. Support vector machine with radial basis kernel function algorithm and neural network algorithm exhibited the highest average accuracy (79.27 and 78.22%, respectively) with 28 features (P<0.05). Correlation analysis between feature importance and the statistical significance of metrics was investigated, and the results revealed a strong positive correlation between them. Overall, the current study demonstrated that major depressive disorder is associated with abnormal functional brain network topological metrics and statistically significant nodal metrics can be successfully used for feature selection in classification algorithms.

Distance Metric Learning via Iterated Support Vector Machines.

PubMed

Zuo, Wangmeng; Wang, Faqiang; Zhang, David; Lin, Liang; Huang, Yuchi; Meng, Deyu; Zhang, Lei

2017-07-11

Distance metric learning aims to learn from the given training data a valid distance metric, with which the similarity between data samples can be more effectively evaluated for classification. Metric learning is often formulated as a convex or nonconvex optimization problem, while most existing methods are based on customized optimizers and become inefficient for large scale problems. In this paper, we formulate metric learning as a kernel classification problem with the positive semi-definite constraint, and solve it by iterated training of support vector machines (SVMs). The new formulation is easy to implement and efficient in training with the off-the-shelf SVM solvers. Two novel metric learning models, namely Positive-semidefinite Constrained Metric Learning (PCML) and Nonnegative-coefficient Constrained Metric Learning (NCML), are developed. Both PCML and NCML can guarantee the global optimality of their solutions. Experiments are conducted on general classification, face verification and person re-identification to evaluate our methods. Compared with the state-of-the-art approaches, our methods can achieve comparable classification accuracy and are efficient in training.

NABS RESPONSE OF A MULTI-METRIC FISH BIOTIC INDEX TO SPECIES DECLINES

EPA Science Inventory

Multi-metric indices of biotic integrity (IBI) are commonly used to compare fish communities among streams, but ability to monitor trends within streams is largely unknown. We assessed the IBI trend detection ability using simulations which progressively degraded the fish assembl...

A Validation of Object-Oriented Design Metrics

NASA Technical Reports Server (NTRS)

Basili, Victor R.; Briand, Lionel; Melo, Walcelio L.

1995-01-01

This paper presents the results of a study conducted at the University of Maryland in which we experimentally investigated the suite of Object-Oriented (00) design metrics introduced by [Chidamber and Kemerer, 1994]. In order to do this, we assessed these metrics as predictors of fault-prone classes. This study is complementary to [Lieand Henry, 1993] where the same suite of metrics had been used to assess frequencies of maintenance changes to classes. To perform our validation accurately, we collected data on the development of eight medium-sized information management systems based on identical requirements. All eight projects were developed using a sequential life cycle model, a well-known 00 analysis/design method and the C++ programming language. Based on experimental results, the advantages and drawbacks of these 00 metrics are discussed and suggestions for improvement are provided. Several of Chidamber and Kemerer's 00 metrics appear to be adequate to predict class fault-proneness during the early phases of the life-cycle. We also showed that they are, on our data set, better predictors than "traditional" code metrics, which can only be collected at a later phase of the software development processes.

Smart Grid Status and Metrics Report Appendices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Balducci, Patrick J.; Antonopoulos, Chrissi A.; Clements, Samuel L.

A smart grid uses digital power control and communication technology to improve the reliability, security, flexibility, and efficiency of the electric system, from large generation through the delivery systems to electricity consumers and a growing number of distributed generation and storage resources. To convey progress made in achieving the vision of a smart grid, this report uses a set of six characteristics derived from the National Energy Technology Laboratory Modern Grid Strategy. The Smart Grid Status and Metrics Report defines and examines 21 metrics that collectively provide insight into the grid’s capacity to embody these characteristics. This appendix presents papersmore » covering each of the 21 metrics identified in Section 2.1 of the Smart Grid Status and Metrics Report. These metric papers were prepared in advance of the main body of the report and collectively form its informational backbone.« less

What Can Article-Level Metrics Do for You?

PubMed Central

Fenner, Martin

2013-01-01

Article-level metrics (ALMs) provide a wide range of metrics about the uptake of an individual journal article by the scientific community after publication. They include citations, usage statistics, discussions in online comments and social media, social bookmarking, and recommendations. In this essay, we describe why article-level metrics are an important extension of traditional citation-based journal metrics and provide a number of example from ALM data collected for PLOS Biology. PMID:24167445

What can article-level metrics do for you?

PubMed

Fenner, Martin

2013-10-01

Article-level metrics (ALMs) provide a wide range of metrics about the uptake of an individual journal article by the scientific community after publication. They include citations, usage statistics, discussions in online comments and social media, social bookmarking, and recommendations. In this essay, we describe why article-level metrics are an important extension of traditional citation-based journal metrics and provide a number of example from ALM data collected for PLOS Biology.

Metrics to assess ecological condition, change, and impacts in sandy beach ecosystems.

PubMed

Schlacher, Thomas A; Schoeman, David S; Jones, Alan R; Dugan, Jenifer E; Hubbard, David M; Defeo, Omar; Peterson, Charles H; Weston, Michael A; Maslo, Brooke; Olds, Andrew D; Scapini, Felicita; Nel, Ronel; Harris, Linda R; Lucrezi, Serena; Lastra, Mariano; Huijbers, Chantal M; Connolly, Rod M

2014-11-01

Complexity is increasingly the hallmark in environmental management practices of sandy shorelines. This arises primarily from meeting growing public demands (e.g., real estate, recreation) whilst reconciling economic demands with expectations of coastal users who have modern conservation ethics. Ideally, shoreline management is underpinned by empirical data, but selecting ecologically-meaningful metrics to accurately measure the condition of systems, and the ecological effects of human activities, is a complex task. Here we construct a framework for metric selection, considering six categories of issues that authorities commonly address: erosion; habitat loss; recreation; fishing; pollution (litter and chemical contaminants); and wildlife conservation. Possible metrics were scored in terms of their ability to reflect environmental change, and against criteria that are widely used for judging the performance of ecological indicators (i.e., sensitivity, practicability, costs, and public appeal). From this analysis, four types of broadly applicable metrics that also performed very well against the indicator criteria emerged: 1.) traits of bird populations and assemblages (e.g., abundance, diversity, distributions, habitat use); 2.) breeding/reproductive performance sensu lato (especially relevant for birds and turtles nesting on beaches and in dunes, but equally applicable to invertebrates and plants); 3.) population parameters and distributions of vertebrates associated primarily with dunes and the supralittoral beach zone (traditionally focused on birds and turtles, but expandable to mammals); 4.) compound measurements of the abundance/cover/biomass of biota (plants, invertebrates, vertebrates) at both the population and assemblage level. Local constraints (i.e., the absence of birds in highly degraded urban settings or lack of dunes on bluff-backed beaches) and particular issues may require alternatives. Metrics - if selected and applied correctly - provide

A Safety Index and Method for Flightdeck Evaluation

NASA Technical Reports Server (NTRS)

Latorella, Kara A.

2000-01-01

If our goal is to improve safety through machine, interface, and training design, then we must define a metric of flightdeck safety that is usable in the design process. Current measures associated with our notions of "good" pilot performance and ultimate safety of flightdeck performance fail to provide an adequate index of safe flightdeck performance for design evaluation purposes. The goal of this research effort is to devise a safety index and method that allows us to evaluate flightdeck performance holistically and in a naturalistic experiment. This paper uses Reason's model of accident causation (1990) as a basis for measuring safety, and proposes a relational database system and method for 1) defining a safety index of flightdeck performance, and 2) evaluating the "safety" afforded by flightdeck performance for the purpose of design iteration. Methodological considerations, limitations, and benefits are discussed as well as extensions to this work.

Lipschitz Metric for the Novikov Equation

NASA Astrophysics Data System (ADS)

Cai, Hong; Chen, Geng; Chen, Robin Ming; Shen, Yannan

2018-03-01

We consider the Lipschitz continuous dependence of solutions for the Novikov equation with respect to the initial data. In particular, we construct a Finsler type optimal transport metric which renders the solution map Lipschitz continuous on bounded sets of {H^1(R)\\cap W^{1,4}(R)} , although it is not Lipschitz continuous under the natural Sobolev metric from an energy law due to the finite time gradient blowup. By an application of Thom's transversality theorem, we also prove that when the initial data is in an open dense subset of {H^1(R)\\cap W^{1,4}(R)} , the solution is piecewise smooth. This generic regularity result helps us extend the Lipschitz continuous metric to the general weak solutions. Our method of constructing the metric can be used to treat other kinds of quasi-linear equations, provided a good knowledge about the energy concentration.

Regional Sustainability: The San Luis Basin Metrics Project

EPA Science Inventory

There are a number of established, scientifically supported metrics of sustainability. Many of the metrics are data intensive and require extensive effort to collect data and compute. Moreover, individual metrics may not capture all aspects of a system that are relevant to sust...

Bibliometrics: tracking research impact by selecting the appropriate metrics.

PubMed

Agarwal, Ashok; Durairajanayagam, Damayanthi; Tatagari, Sindhuja; Esteves, Sandro C; Harlev, Avi; Henkel, Ralf; Roychoudhury, Shubhadeep; Homa, Sheryl; Puchalt, Nicolás Garrido; Ramasamy, Ranjith; Majzoub, Ahmad; Ly, Kim Dao; Tvrda, Eva; Assidi, Mourad; Kesari, Kavindra; Sharma, Reecha; Banihani, Saleem; Ko, Edmund; Abu-Elmagd, Muhammad; Gosalvez, Jaime; Bashiri, Asher

2016-01-01

Traditionally, the success of a researcher is assessed by the number of publications he or she publishes in peer-reviewed, indexed, high impact journals. This essential yardstick, often referred to as the impact of a specific researcher, is assessed through the use of various metrics. While researchers may be acquainted with such matrices, many do not know how to use them to enhance their careers. In addition to these metrics, a number of other factors should be taken into consideration to objectively evaluate a scientist's profile as a researcher and academician. Moreover, each metric has its own limitations that need to be considered when selecting an appropriate metric for evaluation. This paper provides a broad overview of the wide array of metrics currently in use in academia and research. Popular metrics are discussed and defined, including traditional metrics and article-level metrics, some of which are applied to researchers for a greater understanding of a particular concept, including varicocele that is the thematic area of this Special Issue of Asian Journal of Andrology. We recommend the combined use of quantitative and qualitative evaluation using judiciously selected metrics for a more objective assessment of scholarly output and research impact.

Performance assessment of geospatial simulation models of land-use change--a landscape metric-based approach.

PubMed

Sakieh, Yousef; Salmanmahiny, Abdolrassoul

2016-03-01

Performance evaluation is a critical step when developing land-use and cover change (LUCC) models. The present study proposes a spatially explicit model performance evaluation method, adopting a landscape metric-based approach. To quantify GEOMOD model performance, a set of composition- and configuration-based landscape metrics including number of patches, edge density, mean Euclidean nearest neighbor distance, largest patch index, class area, landscape shape index, and splitting index were employed. The model takes advantage of three decision rules including neighborhood effect, persistence of change direction, and urbanization suitability values. According to the results, while class area, largest patch index, and splitting indices demonstrated insignificant differences between spatial pattern of ground truth and simulated layers, there was a considerable inconsistency between simulation results and real dataset in terms of the remaining metrics. Specifically, simulation outputs were simplistic and the model tended to underestimate number of developed patches by producing a more compact landscape. Landscape-metric-based performance evaluation produces more detailed information (compared to conventional indices such as the Kappa index and overall accuracy) on the model's behavior in replicating spatial heterogeneity features of a landscape such as frequency, fragmentation, isolation, and density. Finally, as the main characteristic of the proposed method, landscape metrics employ the maximum potential of observed and simulated layers for a performance evaluation procedure, provide a basis for more robust interpretation of a calibration process, and also deepen modeler insight into the main strengths and pitfalls of a specific land-use change model when simulating a spatiotemporal phenomenon.

A probability metric for identifying high-performing facilities: an application for pay-for-performance programs.

PubMed

Shwartz, Michael; Peköz, Erol A; Burgess, James F; Christiansen, Cindy L; Rosen, Amy K; Berlowitz, Dan

2014-12-01

Two approaches are commonly used for identifying high-performing facilities on a performance measure: one, that the facility is in a top quantile (eg, quintile or quartile); and two, that a confidence interval is below (or above) the average of the measure for all facilities. This type of yes/no designation often does not do well in distinguishing high-performing from average-performing facilities. To illustrate an alternative continuous-valued metric for profiling facilities--the probability a facility is in a top quantile--and show the implications of using this metric for profiling and pay-for-performance. We created a composite measure of quality from fiscal year 2007 data based on 28 quality indicators from 112 Veterans Health Administration nursing homes. A Bayesian hierarchical multivariate normal-binomial model was used to estimate shrunken rates of the 28 quality indicators, which were combined into a composite measure using opportunity-based weights. Rates were estimated using Markov Chain Monte Carlo methods as implemented in WinBUGS. The probability metric was calculated from the simulation replications. Our probability metric allowed better discrimination of high performers than the point or interval estimate of the composite score. In a pay-for-performance program, a smaller top quantile (eg, a quintile) resulted in more resources being allocated to the highest performers, whereas a larger top quantile (eg, being above the median) distinguished less among high performers and allocated more resources to average performers. The probability metric has potential but needs to be evaluated by stakeholders in different types of delivery systems.

Idaho National Laboratory Integrated Safety Management System FY 2016 Effectiveness Review and Declaration Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hunt, Farren J.

Idaho National Laboratory’s (INL’s) Integrated Safety Management System (ISMS) effectiveness review of fiscal year (FY) 2016 shows that INL has integrated management programs and safety elements throughout the oversight and operational activities performed at INL. The significant maturity of Contractor Assurance System (CAS) processes, as demonstrated across INL’s management systems and periodic reporting through the Management Review Meeting process, over the past two years has provided INL with current real-time understanding and knowledge pertaining to the health of the institution. INL’s sustained excellence of the Integrated Safety and effective implementation of the Worker Safety and Health Program is also evidencedmore » by other external validations and key indicators. In particular, external validations include VPP, ISO 14001, DOELAP accreditation, and key Laboratory level indicators such as ORPS (number, event frequency and severity); injury/illness indicators such as Days Away, Restricted and Transfer (DART) case rate, back & shoulder metric and open reporting indicators, demonstrate a continuous positive trend and therefore improved operational performance over the last few years. These indicators are also reflective of the Laboratory’s overall organizational and safety culture improvement. Notably, there has also been a step change in ESH&Q Leadership actions that have been recognized both locally and complex-wide. Notwithstanding, Laboratory management continues to monitor and take action on lower level negative trends in numerous areas including: Conduct of Operations, Work Control, Work Site Analysis, Risk Assessment, LO/TO, Fire Protection, and Life Safety Systems, to mention a few. While the number of severe injury cases has decreased, as evidenced by the reduction in the DART case rate, the two hand injuries and the fire truck/ambulance accident were of particular concern. Aggressive actions continue in order to understand the causes

Domestic water service delivery indicators and frameworks for monitoring, evaluation, policy and planning: a review.

PubMed

Kayser, Georgia L; Moriarty, Patrick; Fonseca, Catarina; Bartram, Jamie

2013-10-11

Monitoring of water services informs policy and planning for national governments and the international community. Currently, the international monitoring system measures the type of drinking water source that households use. There have been calls for improved monitoring systems over several decades, some advocating use of multiple indicators. We review the literature on water service indicators and frameworks with a view to informing debate on their relevance to national and international monitoring. We describe the evidence concerning the relevance of each identified indicator to public health, economic development and human rights. We analyze the benefits and challenges of using these indicators separately and combined in an index as tools for planning, monitoring, and evaluating water services. We find substantial evidence on the importance of each commonly recommended indicator--service type, safety, quantity, accessibility, reliability or continuity of service, equity, and affordability. Several frameworks have been proposed that give structure to the relationships among individual indicators and some combine multiple indicator scores into a single index but few have been rigorously tested. More research is needed to understand if employing a composite metric of indicators is advantageous and how each indicator might be scored and scaled.

Performance Metrics, Error Modeling, and Uncertainty Quantification

NASA Technical Reports Server (NTRS)

Tian, Yudong; Nearing, Grey S.; Peters-Lidard, Christa D.; Harrison, Kenneth W.; Tang, Ling

2016-01-01

A common set of statistical metrics has been used to summarize the performance of models or measurements-­ the most widely used ones being bias, mean square error, and linear correlation coefficient. They assume linear, additive, Gaussian errors, and they are interdependent, incomplete, and incapable of directly quantifying un­certainty. The authors demonstrate that these metrics can be directly derived from the parameters of the simple linear error model. Since a correct error model captures the full error information, it is argued that the specification of a parametric error model should be an alternative to the metrics-based approach. The error-modeling meth­odology is applicable to both linear and nonlinear errors, while the metrics are only meaningful for linear errors. In addition, the error model expresses the error structure more naturally, and directly quantifies uncertainty. This argument is further explained by highlighting the intrinsic connections between the performance metrics, the error model, and the joint distribution between the data and the reference.

General Wahlquist metrics in all dimensions

NASA Astrophysics Data System (ADS)

Hinoue, Kazuki; Houri, Tsuyoshi; Rugina, Christina; Yasui, Yukinori

2014-07-01

It is shown that the Wahlquist metric, which is a stationary, axially symmetric perfect fluid solution with ρ +3p=const, admits a rank-2 generalized closed conformal Killing-Yano tensor with a skew-symmetric torsion. Taking advantage of the presence of such a tensor, we obtain a higher-dimensional generalization of the Wahlquist metric in arbitrary dimensions, including a family of vacuum black hole solutions with spherical horizon topology such as Schwarzschild-Tangherlini, Myers-Perry and higher-dimensional Kerr-NUT-(A)dS metrics and a family of static, spherically symmetric perfect fluid solutions in higher dimensions.

Applying Sigma Metrics to Reduce Outliers.

PubMed

Litten, Joseph

2017-03-01

Sigma metrics can be used to predict assay quality, allowing easy comparison of instrument quality and predicting which tests will require minimal quality control (QC) rules to monitor the performance of the method. A Six Sigma QC program can result in fewer controls and fewer QC failures for methods with a sigma metric of 5 or better. The higher the number of methods with a sigma metric of 5 or better, the lower the costs for reagents, supplies, and control material required to monitor the performance of the methods. Copyright © 2016 Elsevier Inc. All rights reserved.

Metric and morphological assessment of facial features: a study on three European populations.

PubMed

Ritz-Timme, S; Gabriel, P; Tutkuviene, J; Poppa, P; Obertová, Z; Gibelli, D; De Angelis, D; Ratnayake, M; Rizgeliene, R; Barkus, A; Cattaneo, C

2011-04-15

Identification from video surveillance systems is becoming more and more frequent in the forensic practice. In this field, different techniques have been improved such as height estimation and gait analysis. However, the most natural approach for identifying a person in everyday life is based on facial characteristics. Scientifically, faces can be described using morphological and metric assessment of facial features. The morphological approach is largely affected by the subjective opinion of the observer, which can be mitigated by the application of descriptive atlases. In addition, this approach requires one to investigate which are the most common and rare facial characteristics in different populations. For the metric approach further studies are necessary in order to point out possible metric differences within and between different populations. The acquisition of statistically adequate population data may provide useful information for the reconstruction of biological profiles of unidentified individuals, particularly concerning ethnic affiliation, and possibly also for personal identification. This study presents the results of the morphological and metric assessment of the head and face of 900 male subjects between 20 and 31 years from Italy, Germany and Lithuania. The evaluation of the morphological traits was performed using the DMV atlas with 43 pre-defined facial characteristics. The frequencies of the types of facial features were calculated for each population in order to establish the rarest characteristics which may be used for the purpose of a biological profile and consequently for personal identification. Metric analysis performed in vivo included 24 absolute measurements and 24 indices of the head and face, including body height and body weight. The comparison of the frequencies of morphological facial features showed many similarities between the samples from Germany, Italy and Lithuania. However, several characteristics were rare or

Comparing Institution Nitrogen Footprints: Metrics for ...

EPA Pesticide Factsheets

When multiple institutions with strong sustainability initiatives use a new environmental impact assessment tool, there is an impulse to compare. The first seven institutions to calculate their nitrogen footprints using the nitrogen footprint tool have worked collaboratively to improve calculation methods, share resources, and suggest methods for reducing their footprints. This paper compares the results of those seven results to reveal the common and unique drivers of institution nitrogen footprints. The footprints were compared by scope and sector, and the results were normalized by multiple factors (e.g., population, number of meals served). The comparisons found many consistencies across the footprints, including the large contribution of food. The comparisons identified metrics that could be used to track progress, such as an overall indicator for the nitrogen sustainability of food purchases. The results also found differences in system bounds of the calculations, which are important to standardize when comparing across institutions. The footprints were influenced by factors that are both within and outside of the institutions’ ability to control, such as size, location, population, and campus use. However, these comparisons also point to a pathway forward for standardizing nitrogen footprint tool calculations, identifying metrics that can be used to track progress, and determining a sustainable institution nitrogen footprint. This paper is being submitt

Aquatic Acoustic Metrics Interface

DOE Office of Scientific and Technical Information (OSTI.GOV)

2012-12-18

Fishes and marine mammals may suffer a range of potential effects from exposure to intense underwater sound generated by anthropogenic activities such as pile driving, shipping, sonars, and underwater blasting. Several underwater sound recording (USR) devices have been built to acquire samples of the underwater sound generated by anthropogenic activities. Software becomes indispensable for processing and analyzing the audio files recorded by these USRs. The new Aquatic Acoustic Metrics Interface Utility Software (AAMI) is specifically designed for analysis of underwater sound recordings to provide data in metrics that facilitate evaluation of the potential impacts of the sound on aquatic animals.more » In addition to the basic functions, such as loading and editing audio files recorded by USRs and batch processing of sound files, the software utilizes recording system calibration data to compute important parameters in physical units. The software also facilitates comparison of the noise sound sample metrics with biological measures such as audiograms of the sensitivity of aquatic animals to the sound, integrating various components into a single analytical frame.« less

A Review of Indicators of Estuarine Tidal Wetland Condition

EPA Science Inventory

This review critically evaluates indicators of tidal wetland condition based on 36 indicator development studies and indicators developed as part of U.S. state tidal wetland monitoring programs. Individual metrics were evaluated based on relative scores on two sets of evaluation ...

Metrication: An economic wake-up call for US industry

NASA Astrophysics Data System (ADS)

Carver, G. P.

1993-03-01

As the international standard of measurement, the metric system is one key to success in the global marketplace. International standards have become an important factor in international economic competition. Non-metric products are becoming increasingly unacceptable in world markets that favor metric products. Procurement is the primary federal tool for encouraging and helping U.S. industry to convert voluntarily to the metric system. Besides the perceived unwillingness of the customer, certain regulatory language, and certain legal definitions in some states, there are no major impediments to conversion of the remaining non-metric industries to metric usage. Instead, there are good reasons for changing, including an opportunity to rethink many industry standards and to take advantage of size standardization. Also, when the remaining industries adopt the metric system, they will come into conformance with federal agencies engaged in similar activities.

Building structural similarity database for metric learning

NASA Astrophysics Data System (ADS)

Jin, Guoxin; Pappas, Thrasyvoulos N.

2015-03-01

We propose a new approach for constructing databases for training and testing similarity metrics for structurally lossless image compression. Our focus is on structural texture similarity (STSIM) metrics and the matched-texture compression (MTC) approach. We first discuss the metric requirements for structurally lossless compression, which differ from those of other applications such as image retrieval, classification, and understanding. We identify "interchangeability" as the key requirement for metric performance, and partition the domain of "identical" textures into three regions, of "highest," "high," and "good" similarity. We design two subjective tests for data collection, the first relies on ViSiProG to build a database of "identical" clusters, and the second builds a database of image pairs with the "highest," "high," "good," and "bad" similarity labels. The data for the subjective tests is generated during the MTC encoding process, and consist of pairs of candidate and target image blocks. The context of the surrounding image is critical for training the metrics to detect lighting discontinuities, spatial misalignments, and other border artifacts that have a noticeable effect on perceptual quality. The identical texture clusters are then used for training and testing two STSIM metrics. The labelled image pair database will be used in future research.

Constrained Metric Learning by Permutation Inducing Isometries.

PubMed

Bosveld, Joel; Mahmood, Arif; Huynh, Du Q; Noakes, Lyle

2016-01-01

The choice of metric critically affects the performance of classification and clustering algorithms. Metric learning algorithms attempt to improve performance, by learning a more appropriate metric. Unfortunately, most of the current algorithms learn a distance function which is not invariant to rigid transformations of images. Therefore, the distances between two images and their rigidly transformed pair may differ, leading to inconsistent classification or clustering results. We propose to constrain the learned metric to be invariant to the geometry preserving transformations of images that induce permutations in the feature space. The constraint that these transformations are isometries of the metric ensures consistent results and improves accuracy. Our second contribution is a dimension reduction technique that is consistent with the isometry constraints. Our third contribution is the formulation of the isometry constrained logistic discriminant metric learning (IC-LDML) algorithm, by incorporating the isometry constraints within the objective function of the LDML algorithm. The proposed algorithm is compared with the existing techniques on the publicly available labeled faces in the wild, viewpoint-invariant pedestrian recognition, and Toy Cars data sets. The IC-LDML algorithm has outperformed existing techniques for the tasks of face recognition, person identification, and object classification by a significant margin.

Metrics for Offline Evaluation of Prognostic Performance

NASA Technical Reports Server (NTRS)

Saxena, Abhinav; Celaya, Jose; Saha, Bhaskar; Saha, Sankalita; Goebel, Kai

2010-01-01

Prognostic performance evaluation has gained significant attention in the past few years. Currently, prognostics concepts lack standard definitions and suffer from ambiguous and inconsistent interpretations. This lack of standards is in part due to the varied end-user requirements for different applications, time scales, available information, domain dynamics, etc. to name a few. The research community has used a variety of metrics largely based on convenience and their respective requirements. Very little attention has been focused on establishing a standardized approach to compare different efforts. This paper presents several new evaluation metrics tailored for prognostics that were recently introduced and were shown to effectively evaluate various algorithms as compared to other conventional metrics. Specifically, this paper presents a detailed discussion on how these metrics should be interpreted and used. These metrics have the capability of incorporating probabilistic uncertainty estimates from prognostic algorithms. In addition to quantitative assessment they also offer a comprehensive visual perspective that can be used in designing the prognostic system. Several methods are suggested to customize these metrics for different applications. Guidelines are provided to help choose one method over another based on distribution characteristics. Various issues faced by prognostics and its performance evaluation are discussed followed by a formal notational framework to help standardize subsequent developments.

Evaluating Algorithm Performance Metrics Tailored for Prognostics

NASA Technical Reports Server (NTRS)

Saxena, Abhinav; Celaya, Jose; Saha, Bhaskar; Saha, Sankalita; Goebel, Kai

2009-01-01

Prognostics has taken a center stage in Condition Based Maintenance (CBM) where it is desired to estimate Remaining Useful Life (RUL) of the system so that remedial measures may be taken in advance to avoid catastrophic events or unwanted downtimes. Validation of such predictions is an important but difficult proposition and a lack of appropriate evaluation methods renders prognostics meaningless. Evaluation methods currently used in the research community are not standardized and in many cases do not sufficiently assess key performance aspects expected out of a prognostics algorithm. In this paper we introduce several new evaluation metrics tailored for prognostics and show that they can effectively evaluate various algorithms as compared to other conventional metrics. Specifically four algorithms namely; Relevance Vector Machine (RVM), Gaussian Process Regression (GPR), Artificial Neural Network (ANN), and Polynomial Regression (PR) are compared. These algorithms vary in complexity and their ability to manage uncertainty around predicted estimates. Results show that the new metrics rank these algorithms in different manner and depending on the requirements and constraints suitable metrics may be chosen. Beyond these results, these metrics offer ideas about how metrics suitable to prognostics may be designed so that the evaluation procedure can be standardized. 1

Introduction to Preharvest Food Safety.

PubMed

Torrence, Mary E

2016-10-01

This introductory article provides an overview of preharvest food safety activities and initiatives for the past 15 years. The section on traditional areas of preharvest food safety focuses on significant scientific advancements that are a culmination of collaborative efforts (both public health and agriculture) and significant research results. The highlighted advancements provide the foundation for exploring future preharvest areas and for improving and focusing on more specific intervention/control/prevention strategies. Examples include Escherichia coli and cattle, Salmonella and Campylobacter in poultry, and interventions and prevention and control programs. The section on "nontraditional" preharvest food safety areas brings attention to potential emerging food safety issues and to future food safety research directions. These include organic production, the FDA's Produce Rule (water and manure), genomic sequencing, antimicrobial resistance, and performance metrics. The concluding section emphasizes important themes such as strategic planning, coordination, epidemiology, and the need for understanding food safety production as a continuum. Food safety research, whether at the pre- or postharvest level, will continue to be a fascinating complex web of foodborne pathogens, risk factors, and scientific and policy interactions. Food safety priorities and research must continue to evolve with emerging global issues, emerging technologies, and methods but remain grounded in a multidisciplinary, collaborative, and systematic approach.

The orthopaedic error index: development and application of a novel national indicator for assessing the relative safety of hospital care using a cross-sectional approach.

PubMed

Panesar, Sukhmeet S; Netuveli, Gopalakrishnan; Carson-Stevens, Andrew; Javad, Sundas; Patel, Bhavesh; Parry, Gareth; Donaldson, Liam J; Sheikh, Aziz

2013-11-21

The Orthopaedic Error Index for hospitals aims to provide the first national assessment of the relative safety of provision of orthopaedic surgery. Cross-sectional study (retrospective analysis of records in a database). The National Reporting and Learning System is the largest national repository of patient-safety incidents in the world with over eight million error reports. It offers a unique opportunity to develop novel approaches to enhancing patient safety, including investigating the relative safety of different healthcare providers and specialties. We extracted all orthopaedic error reports from the system over 1 year (2009-2010). The Orthopaedic Error Index was calculated as a sum of the error propensity and severity. All relevant hospitals offering orthopaedic surgery in England were then ranked by this metric to identify possible outliers that warrant further attention. 155 hospitals reported 48 971 orthopaedic-related patient-safety incidents. The mean Orthopaedic Error Index was 7.09/year (SD 2.72); five hospitals were identified as outliers. Three of these units were specialist tertiary hospitals carrying out complex surgery; the remaining two outlier hospitals had unusually high Orthopaedic Error Indexes: mean 14.46 (SD 0.29) and 15.29 (SD 0.51), respectively. The Orthopaedic Error Index has enabled identification of hospitals that may be putting patients at disproportionate risk of orthopaedic-related iatrogenic harm and which therefore warrant further investigation. It provides the prototype of a summary index of harm to enable surveillance of unsafe care over time across institutions. Further validation and scrutiny of the method will be required to assess its potential to be extended to other hospital specialties in the UK and also internationally to other health systems that have comparable national databases of patient-safety incidents.

The LSST metrics analysis framework (MAF)

NASA Astrophysics Data System (ADS)

Jones, R. L.; Yoachim, Peter; Chandrasekharan, Srinivasan; Connolly, Andrew J.; Cook, Kem H.; Ivezic, Željko; Krughoff, K. S.; Petry, Catherine; Ridgway, Stephen T.

2014-07-01

We describe the Metrics Analysis Framework (MAF), an open-source python framework developed to provide a user-friendly, customizable, easily-extensible set of tools for analyzing data sets. MAF is part of the Large Synoptic Survey Telescope (LSST) Simulations effort. Its initial goal is to provide a tool to evaluate LSST Operations Simulation (OpSim) simulated surveys to help understand the effects of telescope scheduling on survey performance, however MAF can be applied to a much wider range of datasets. The building blocks of the framework are Metrics (algorithms to analyze a given quantity of data), Slicers (subdividing the overall data set into smaller data slices as relevant for each Metric), and Database classes (to access the dataset and read data into memory). We describe how these building blocks work together, and provide an example of using MAF to evaluate different dithering strategies. We also outline how users can write their own custom Metrics and use these within the framework.

The Metric Revolution

ERIC Educational Resources Information Center

Hastings, R. B.

1974-01-01

Discusses implications arising from conversion to the metric system in the United States. Argues that isolationism in the language of measurement has no more justification today than does isolationism in international relations. (PEB)

Comparison of task-based exposure metrics for an epidemiologic study of isocyanate inhalation exposures among autobody shop workers.

PubMed

Woskie, Susan R; Bello, Dhimiter; Gore, Rebecca J; Stowe, Meredith H; Eisen, Ellen A; Liu, Youcheng; Sparer, Judy A; Redlich, Carrie A; Cullen, Mark R

2008-09-01

Because many occupational epidemiologic studies use exposure surrogates rather than quantitative exposure metrics, the UMass Lowell and Yale study of autobody shop workers provided an opportunity to evaluate the relative utility of surrogates and quantitative exposure metrics in an exposure response analysis of cross-week change in respiratory function. A task-based exposure assessment was used to develop several metrics of inhalation exposure to isocyanates. The metrics included the surrogates, job title, counts of spray painting events during the day, counts of spray and bystander exposure events, and a quantitative exposure metric that incorporated exposure determinant models based on task sampling and a personal workplace protection factor for respirator use, combined with a daily task checklist. The result of the quantitative exposure algorithm was an estimate of the daily time-weighted average respirator-corrected total NCO exposure (microg/m(3)). In general, these four metrics were found to be variable in agreement using measures such as weighted kappa and Spearman correlation. A logistic model for 10% drop in FEV(1) from Monday morning to Thursday morning was used to evaluate the utility of each exposure metric. The quantitative exposure metric was the most favorable, producing the best model fit, as well as the greatest strength and magnitude of association. This finding supports the reports of others that reducing exposure misclassification can improve risk estimates that otherwise would be biased toward the null. Although detailed and quantitative exposure assessment can be more time consuming and costly, it can improve exposure-disease evaluations and is more useful for risk assessment purposes. The task-based exposure modeling method successfully produced estimates of daily time-weighted average exposures in the complex and changing autobody shop work environment. The ambient TWA exposures of all of the office workers and technicians and 57% of the

The LSST Metrics Analysis Framework (MAF)

NASA Astrophysics Data System (ADS)

Jones, R. Lynne; Yoachim, Peter; Chandrasekharan, Srinivasan; Connolly, Andrew J.; Cook, Kem H.; Ivezic, Zeljko; Krughoff, K. Simon; Petry, Catherine E.; Ridgway, Stephen T.

2015-01-01

Studying potential observing strategies or cadences for the Large Synoptic Survey Telescope (LSST) is a complicated but important problem. To address this, LSST has created an Operations Simulator (OpSim) to create simulated surveys, including realistic weather and sky conditions. Analyzing the results of these simulated surveys for the wide variety of science cases to be considered for LSST is, however, difficult. We have created a Metric Analysis Framework (MAF), an open-source python framework, to be a user-friendly, customizable and easily extensible tool to help analyze the outputs of the OpSim.MAF reads the pointing history of the LSST generated by the OpSim, then enables the subdivision of these pointings based on position on the sky (RA/Dec, etc.) or the characteristics of the observations (e.g. airmass or sky brightness) and a calculation of how well these observations meet a specified science objective (or metric). An example simple metric could be the mean single visit limiting magnitude for each position in the sky; a more complex metric might be the expected astrometric precision. The output of these metrics can be generated for a full survey, for specified time intervals, or for regions of the sky, and can be easily visualized using a web interface.An important goal for MAF is to facilitate analysis of the OpSim outputs for a wide variety of science cases. A user can often write a new metric to evaluate OpSim for new science goals in less than a day once they are familiar with the framework. Some of these new metrics are illustrated in the accompanying poster, "Analyzing Simulated LSST Survey Performance With MAF".While MAF has been developed primarily for application to OpSim outputs, it can be applied to any dataset. The most obvious examples are examining pointing histories of other survey projects or telescopes, such as CFHT.

The Adult Conversion to Metrics: Is Education Enough?

ERIC Educational Resources Information Center

Kundel, Susan E.

1979-01-01

The American College Testing Program sought to determine whether metric education for adult consumers would result in more positive attitudes to metric conversion. Examining preopinion, pretest, posttest, post-opinion, and background data, the researchers found that simply teaching adults how to use the metric system does not significantly affect…

Domestic Water Service Delivery Indicators and Frameworks for Monitoring, Evaluation, Policy and Planning: A Review

PubMed Central

Kayser, Georgia L.; Moriarty, Patrick; Fonseca, Catarina; Bartram, Jamie

2013-01-01

Monitoring of water services informs policy and planning for national governments and the international community. Currently, the international monitoring system measures the type of drinking water source that households use. There have been calls for improved monitoring systems over several decades, some advocating use of multiple indicators. We review the literature on water service indicators and frameworks with a view to informing debate on their relevance to national and international monitoring. We describe the evidence concerning the relevance of each identified indicator to public health, economic development and human rights. We analyze the benefits and challenges of using these indicators separately and combined in an index as tools for planning, monitoring, and evaluating water services. We find substantial evidence on the importance of each commonly recommended indicator—service type, safety, quantity, accessibility, reliability or continuity of service, equity, and affordability. Several frameworks have been proposed that give structure to the relationships among individual indicators and some combine multiple indicator scores into a single index but few have been rigorously tested. More research is needed to understand if employing a composite metric of indicators is advantageous and how each indicator might be scored and scaled. PMID:24157507

NASA education briefs for the classroom. Metrics in space

NASA Technical Reports Server (NTRS)

1982-01-01

The use of metric measurement in space is summarized for classroom use. Advantages of the metric system over the English measurement system are described. Some common metric units are defined, as are special units for astronomical study. International system unit prefixes and a conversion table of metric/English units are presented. Questions and activities for the classroom are recommended.

NASA education briefs for the classroom. Metrics in space

NASA Astrophysics Data System (ADS)

The use of metric measurement in space is summarized for classroom use. Advantages of the metric system over the English measurement system are described. Some common metric units are defined, as are special units for astronomical study. International system unit prefixes and a conversion table of metric/English units are presented. Questions and activities for the classroom are recommended.

Bibliometrics: tracking research impact by selecting the appropriate metrics

PubMed Central

Agarwal, Ashok; Durairajanayagam, Damayanthi; Tatagari, Sindhuja; Esteves, Sandro C; Harlev, Avi; Henkel, Ralf; Roychoudhury, Shubhadeep; Homa, Sheryl; Puchalt, Nicolás Garrido; Ramasamy, Ranjith; Majzoub, Ahmad; Ly, Kim Dao; Tvrda, Eva; Assidi, Mourad; Kesari, Kavindra; Sharma, Reecha; Banihani, Saleem; Ko, Edmund; Abu-Elmagd, Muhammad; Gosalvez, Jaime; Bashiri, Asher

2016-01-01

Traditionally, the success of a researcher is assessed by the number of publications he or she publishes in peer-reviewed, indexed, high impact journals. This essential yardstick, often referred to as the impact of a specific researcher, is assessed through the use of various metrics. While researchers may be acquainted with such matrices, many do not know how to use them to enhance their careers. In addition to these metrics, a number of other factors should be taken into consideration to objectively evaluate a scientist's profile as a researcher and academician. Moreover, each metric has its own limitations that need to be considered when selecting an appropriate metric for evaluation. This paper provides a broad overview of the wide array of metrics currently in use in academia and research. Popular metrics are discussed and defined, including traditional metrics and article-level metrics, some of which are applied to researchers for a greater understanding of a particular concept, including varicocele that is the thematic area of this Special Issue of Asian Journal of Andrology. We recommend the combined use of quantitative and qualitative evaluation using judiciously selected metrics for a more objective assessment of scholarly output and research impact. PMID:26806079