Determination of Slope Safety Factor with Analytical Solution and Searching Critical Slip Surface with Genetic-Traversal Random Method

PubMed Central

2014-01-01

In the current practice, to determine the safety factor of a slope with two-dimensional circular potential failure surface, one of the searching methods for the critical slip surface is Genetic Algorithm (GA), while the method to calculate the slope safety factor is Fellenius' slices method. However GA needs to be validated with more numeric tests, while Fellenius' slices method is just an approximate method like finite element method. This paper proposed a new method to determine the minimum slope safety factor which is the determination of slope safety factor with analytical solution and searching critical slip surface with Genetic-Traversal Random Method. The analytical solution is more accurate than Fellenius' slices method. The Genetic-Traversal Random Method uses random pick to utilize mutation. A computer automatic search program is developed for the Genetic-Traversal Random Method. After comparison with other methods like slope/w software, results indicate that the Genetic-Traversal Random Search Method can give very low safety factor which is about half of the other methods. However the obtained minimum safety factor with Genetic-Traversal Random Search Method is very close to the lower bound solutions of slope safety factor given by the Ansys software. PMID:24782679

General aviation crash safety program at Langley Research Center

NASA Technical Reports Server (NTRS)

Thomson, R. G.

1976-01-01

The purpose of the crash safety program is to support development of the technology to define and demonstrate new structural concepts for improved crash safety and occupant survivability in general aviation aircraft. The program involves three basic areas of research: full-scale crash simulation testing, nonlinear structural analyses necessary to predict failure modes and collapse mechanisms of the vehicle, and evaluation of energy absorption concepts for specific component design. Both analytical and experimental methods are being used to develop expertise in these areas. Analyses include both simplified procedures for estimating energy absorption capabilities and more complex computer programs for analysis of general airframe response. Full-scale tests of typical structures as well as tests on structural components are being used to verify the analyses and to demonstrate improved design concepts.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ohi, J.

Supporting analysis and assessments can provide a sound analytic foundation and focus for program planning, evaluation, and coordination, particularly if issues of hydrogen production, distribution, storage, safety, and infrastructure can be analyzed in a comprehensive and systematic manner. The overall purpose of this activity is to coordinate all key analytic tasks-such as technology and market status, opportunities, and trends; environmental costs and benefits; and regulatory constraints and opportunities-within a long-term and systematic analytic foundation for program planning and evaluation. Within this context, the purpose of the project is to help develop and evaluate programmatic pathway options that incorporate near andmore » mid-term strategies to achieve the long-term goals of the Hydrogen Program. In FY 95, NREL will develop a comprehensive effort with industry, state and local agencies, and other federal agencies to identify and evaluate programmatic pathway options to achieve the long-term goals of the Program. Activity to date is reported.« less

Engineering Analysis of Stresses in Railroad Rails.

DOT National Transportation Integrated Search

1981-10-01

One portion of the Federal Railroad Administration's (FRA) Track Performance Improvement Program is the development of engineering and analytic techniques required for the design and maintenance of railroad track of increased integrity and safety. Un...

Preliminary Description of Stresses in Railroad Rail

DOT National Transportation Integrated Search

1976-11-01

One portion of the Federal Railroad Administration's (FRA) Track Performance Improvement Program is the development of engineering and analytic techniques required for the design and maintenance of railroad track of increased integrity and safety. Un...

Sigma Metrics Across the Total Testing Process.

PubMed

Charuruks, Navapun

2017-03-01

Laboratory quality control has been developed for several decades to ensure patients' safety, from a statistical quality control focus on the analytical phase to total laboratory processes. The sigma concept provides a convenient way to quantify the number of errors in extra-analytical and analytical phases through the defect per million and sigma metric equation. Participation in a sigma verification program can be a convenient way to monitor analytical performance continuous quality improvement. Improvement of sigma-scale performance has been shown from our data. New tools and techniques for integration are needed. Copyright © 2016 Elsevier Inc. All rights reserved.

Analytical Chemistry Division annual progress report for period ending December 31, 1988

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The Analytical Chemistry Division of Oak Ridge National Laboratory (ORNL) is a large and diversified organization. As such, it serves a multitude of functions for a clientele that exists both in and outside of ORNL. These functions fall into the following general categories: (1) Analytical Research, Development, and Implementation. The division maintains a program to conceptualize, investigate, develop, assess, improve, and implement advanced technology for chemical and physicochemical measurements. Emphasis is on problems and needs identified with ORNL and Department of Energy (DOE) programs; however, attention is also given to advancing the analytical sciences themselves. (2) Programmatic Research, Development, andmore » Utilization. The division carries out a wide variety of chemical work that typically involves analytical research and/or development plus the utilization of analytical capabilities to expedite programmatic interests. (3) Technical Support. The division performs chemical and physicochemical analyses of virtually all types. The Analytical Chemistry Division is organized into four major sections, each of which may carry out any of the three types of work mentioned above. Chapters 1 through 4 of this report highlight progress within the four sections during the period January 1 to December 31, 1988. A brief discussion of the division's role in an especially important environmental program is given in Chapter 5. Information about quality assurance, safety, and training programs is presented in Chapter 6, along with a tabulation of analyses rendered. Publications, oral presentations, professional activities, educational programs, and seminars are cited in Chapters 7 and 8.« less

Forward Skirt Structural Testing on the Space Launch System (SLS) Program

NASA Technical Reports Server (NTRS)

Lohrer, J. D.; Wright, R. D.

2016-01-01

Structural testing was performed to evaluate heritage forward skirts from the Space Shuttle program for use on the NASA Space Launch System (SLS) program. Testing was needed because SLS ascent loads are 35% higher than Space Shuttle loads. Objectives of testing were to determine margins of safety, demonstrate reliability, and validate analytical models. Testing combined with analysis was able to show heritage forward skirts were acceptable to use on the SLS program.

A National Residue Control Plan from the analytical perspective--the Brazilian case.

PubMed

Mauricio, Angelo de Q; Lins, Erick S; Alvarenga, Marcelo B

2009-04-01

Food safety is a strategic topic entailing not only national public health aspects but also competitiveness in international trade. An important component of any food safety program is the control and monitoring of residues posed by certain substances involved in food production. In turn, a National Residue Control Plan (NRCP) relies on an appropriate laboratory network, not only to generate analytical results, but also more broadly to verify and co-validate the controls built along the food production chain. Therefore laboratories operating under a NRCP should work in close cooperation with inspection bodies, fostering the critical alignment of the whole system with the principles of risk analysis. Beyond producing technically valid results, these laboratories should arguably be able to assist in the prediction and establishment of targets for official control. In pursuit of analytical excellence, the Brazilian government has developed a strategic plan for Official Agricultural Laboratories. Inserted in a national agenda for agricultural risk analysis, the plan has succeeded in raising laboratory budget by approximately 200%, it has started a rigorous program for personnel capacity-building, it has initiated strategic cooperation with international reference centres, and finally, it has completely renewed instrumental resources and rapidly triggered a program aimed at full laboratory compliance with ISO/IEC 17025 requirements.

The development of a rail passenger coach car crush zone

DOT National Transportation Integrated Search

2002-03-21

There is currently an active program within the United States to improve the passive safety of train systems. In particular, the Volpe Center is supporting the Federal Railroad Administrations research that includes numerous analytical studies and...

Installation Restoration Program. Phase 2. Confirmation/Quantification Stage 1. US Air Force Plant Number 42, Palmdale, California. Volume 1

DTIC Science & Technology

1987-02-20

Bacteriology; 8 years professional experience; served as Project Health and Safety Officer. 1-37 o Duane R. Boline - Ph.D. in Analytical Chemistry ; M.S. in... Chemistry ; B.S.E. in Physical Science; 18 years professional experience; served as Project Quality Assurance Officer. Complete biographical data...University, 1962 M.S., Chemistry , Einporia State University 1965 Ph.D., Analytical Chemistry , Kansas State University, 1975

Analytical Chemistry Division annual progress report for period ending December 31, 1989

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-04-01

The Analytical Chemistry Division of Oak Ridge National Laboratory (ORNL) is a large and diversified organization. As such, it serves a multitude of functions for a clientele that exists both in and outside of ORNL. These functions fall into the following general categories: Analytical Research, Development and Implementation; Programmatic Research, Development, and Utilization; and Technical Support. The Analytical Chemistry Division is organized into four major sections, each which may carry out any of the three types of work mentioned above. Chapters 1 through 4 of this report highlight progress within the four sections during the period January 1 to Decembermore » 31, 1989. A brief discussion of the division's role in an especially important environmental program is given in Chapter 5. Information about quality assurance, safety, and training programs is presented in Chapter 6, along with a tabulation of analyses rendered. Publications, oral presentations, professional activities, educational programs, and seminars are cited in Chapters 7 and 8. Approximately 69 articles, 41 proceedings, and 31 reports were published, and 151 oral presentations were given during this reporting period. Some 308,981 determinations were performed.« less

Evaluation of Analytical and Experimental Methodologies for the Characterization of Wheel/Rail Loads

DOT National Transportation Integrated Search

1976-11-01

This report has been prepared as part of the Improved Track Structures Research Program sponsored by the Office of Rail Safety Research of the Federal Railroad Administration. The major modes of track degradation have been reviewed to identify the si...

Aluminum Data Measurements and Evaluation for Criticality Safety Applications

NASA Astrophysics Data System (ADS)

Leal, L. C.; Guber, K. H.; Spencer, R. R.; Derrien, H.; Wright, R. Q.

2002-12-01

The Defense Nuclear Facility Safety Board (DNFSB) Recommendation 93-2 motivated the US Department of Energy (DOE) to develop a comprehensive criticality safety program to maintain and to predict the criticality of systems throughout the DOE complex. To implement the response to the DNFSB Recommendation 93-2, a Nuclear Criticality Safety Program (NCSP) was created including the following tasks: Critical Experiments, Criticality Benchmarks, Training, Analytical Methods, and Nuclear Data. The Nuclear Data portion of the NCSP consists of a variety of differential measurements performed at the Oak Ridge Electron Linear Accelerator (ORELA) at the Oak Ridge National Laboratory (ORNL), data analysis and evaluation using the generalized least-squares fitting code SAMMY in the resolved, unresolved, and high energy ranges, and the development and benchmark testing of complete evaluations for a nuclide for inclusion into the Evaluated Nuclear Data File (ENDF/B). This paper outlines the work performed at ORNL to measure, evaluate, and test the nuclear data for aluminum for applications in criticality safety problems.

Nuclear Data Activities in Support of the DOE Nuclear Criticality Safety Program

NASA Astrophysics Data System (ADS)

Westfall, R. M.; McKnight, R. D.

2005-05-01

The DOE Nuclear Criticality Safety Program (NCSP) provides the technical infrastructure maintenance for those technologies applied in the evaluation and performance of safe fissionable-material operations in the DOE complex. These technologies include an Analytical Methods element for neutron transport as well as the development of sensitivity/uncertainty methods, the performance of Critical Experiments, evaluation and qualification of experiments as Benchmarks, and a comprehensive Nuclear Data program coordinated by the NCSP Nuclear Data Advisory Group (NDAG). The NDAG gathers and evaluates differential and integral nuclear data, identifies deficiencies, and recommends priorities on meeting DOE criticality safety needs to the NCSP Criticality Safety Support Group (CSSG). Then the NDAG identifies the required resources and unique capabilities for meeting these needs, not only for performing measurements but also for data evaluation with nuclear model codes as well as for data processing for criticality safety applications. The NDAG coordinates effort with the leadership of the National Nuclear Data Center, the Cross Section Evaluation Working Group (CSEWG), and the Working Party on International Evaluation Cooperation (WPEC) of the OECD/NEA Nuclear Science Committee. The overall objective is to expedite the issuance of new data and methods to the DOE criticality safety user. This paper describes these activities in detail, with examples based upon special studies being performed in support of criticality safety for a variety of DOE operations.

Low thermal flux glass-fiber tubing for cryogenic service

NASA Technical Reports Server (NTRS)

Hall, C. A.; Spond, D. E.

1977-01-01

This paper describes analytical techniques, fabrication development, and test results for composite tubing that has many applications in aerospace and commercial cryogenic installations. Metal liner fabrication is discussed in detail with attention given to resistance-welded liners, fusion-welded liners, chem-milled tubing liners, joining tube liners and end fittings, heat treatment and leak checks. Composite overwrapping, a second method of tubing fabrication, is also discussed. Test programs and analytical correlation are considered along with composite tubing advantages such as minimum weight, thermal efficiency and safety and reliability.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Campbell, J.A.; Clauss, S.A.; Grant, K.E.

The objectives of this task are to develop and document extraction and analysis methods for organics in waste tanks, and to extend these methods to the analysis of actual core samples to support the Waste Tank organic Safety Program. This report documents progress at Pacific Northwest Laboratory (a) during FY 1994 on methods development, the analysis of waste from Tank 241-C-103 (Tank C-103) and T-111, and the transfer of documented, developed analytical methods to personnel in the Analytical Chemistry Laboratory (ACL) and 222-S laboratory. This report is intended as an annual report, not a completed work.

TRIGRS - A Fortran Program for Transient Rainfall Infiltration and Grid-Based Regional Slope-Stability Analysis, Version 2.0

USGS Publications Warehouse

Baum, Rex L.; Savage, William Z.; Godt, Jonathan W.

2008-01-01

The Transient Rainfall Infiltration and Grid-Based Regional Slope-Stability Model (TRIGRS) is a Fortran program designed for modeling the timing and distribution of shallow, rainfall-induced landslides. The program computes transient pore-pressure changes, and attendant changes in the factor of safety, due to rainfall infiltration. The program models rainfall infiltration, resulting from storms that have durations ranging from hours to a few days, using analytical solutions for partial differential equations that represent one-dimensional, vertical flow in isotropic, homogeneous materials for either saturated or unsaturated conditions. Use of step-function series allows the program to represent variable rainfall input, and a simple runoff routing model allows the user to divert excess water from impervious areas onto more permeable downslope areas. The TRIGRS program uses a simple infinite-slope model to compute factor of safety on a cell-by-cell basis. An approximate formula for effective stress in unsaturated materials aids computation of the factor of safety in unsaturated soils. Horizontal heterogeneity is accounted for by allowing material properties, rainfall, and other input values to vary from cell to cell. This command-line program is used in conjunction with geographic information system (GIS) software to prepare input grids and visualize model results.

Implementation of Information Management System for Radiation Safety of Personnel at the Russian Northwest Center for Radioactive Waste Management 'SevRAO' - 13131

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chizhov, K.; Simakov, A.; Seregin, V.

2013-07-01

The report is an overview of the information-analytical system designed to assure radiation safety of workers. The system was implemented in the Northwest Radioactive Waste Management Center 'SevRAO' (which is a branch of the Federal State Unitary Enterprise 'Radioactive Waste Management Enterprise RosRAO'). The center is located in the Northwest Russia. In respect to 'SevRAO', the Federal Medical-Biological Agency is the regulatory body, which deals with issues of radiation control. The main document to regulate radiation control is 'Reference levels of radiation factors in radioactive wastes management center'. This document contains about 250 parameters. We have developed a software toolmore » to simplify control of these parameters. The software includes: input interface, the database, dose calculating module and analytical block. Input interface is used to enter radiation environment data. Dose calculating module calculates the dose on the route. Analytical block optimizes and analyzes radiation situation maps. Much attention is paid to the GUI and graphical representation of results. The operator can enter the route at the industrial site or watch the fluctuations of the dose rate field on the map. Most of the results are presented in a visual form. Here we present some analytical tasks, such as comparison of the dose rate in some point with control levels at this point, to be solved for the purpose of radiation safety control. The program helps to identify points making the largest contribution to the collective dose of the personnel. The tool can automatically calculate the route with the lowest dose, compare and choose the best route. The program uses several options to visualize the radiation environment at the industrial site. This system will be useful for radiation monitoring services during the operation, planning of works and development of scenarios. The paper presents some applications of this system on real data over three years - from March 2009 to February 2012. (authors)« less

Analytical and Experimental Evaluation of Digital Control Systems for the Semi-Span Super-Sonic Transport (S4T) Wind Tunnel Model

NASA Technical Reports Server (NTRS)

Wieseman, Carol D.; Christhilf, David; Perry, Boyd, III

2012-01-01

An important objective of the Semi-Span Super-Sonic Transport (S4T) wind tunnel model program was the demonstration of Flutter Suppression (FS), Gust Load Alleviation (GLA), and Ride Quality Enhancement (RQE). It was critical to evaluate the stability and robustness of these control laws analytically before testing them and experimentally while testing them to ensure safety of the model and the wind tunnel. MATLAB based software was applied to evaluate the performance of closed-loop systems in terms of stability and robustness. Existing software tools were extended to use analytical representations of the S4T and the control laws to analyze and evaluate the control laws prior to testing. Lessons were learned about the complex windtunnel model and experimental testing. The open-loop flutter boundary was determined from the closed-loop systems. A MATLAB/Simulink Simulation developed under the program is available for future work to improve the CPE process. This paper is one of a series of that comprise a special session, which summarizes the S4T wind-tunnel program.

An Independent Evaluation of the FMEA/CIL Hazard Analysis Alternative Study

NASA Technical Reports Server (NTRS)

Ray, Paul S.

1996-01-01

The present instruments of safety and reliability risk control for a majority of the National Aeronautics and Space Administration (NASA) programs/projects consist of Failure Mode and Effects Analysis (FMEA), Hazard Analysis (HA), Critical Items List (CIL), and Hazard Report (HR). This extensive analytical approach was introduced in the early 1970's and was implemented for the Space Shuttle Program by NHB 5300.4 (1D-2. Since the Challenger accident in 1986, the process has been expanded considerably and resulted in introduction of similar and/or duplicated activities in the safety/reliability risk analysis. A study initiated in 1995, to search for an alternative to the current FMEA/CIL Hazard Analysis methodology generated a proposed method on April 30, 1996. The objective of this Summer Faculty Study was to participate in and conduct an independent evaluation of the proposed alternative to simplify the present safety and reliability risk control procedure.

School-Based and Community-Based Gun Safety Educational Strategies for Injury Prevention.

PubMed

Holly, Cheryl; Porter, Sallie; Kamienski, Mary; Lim, Aubrianne

2018-05-01

Nearly 1,300 children in the United States die because of firearm-related injury each year and another 5,790 survive gunshot wounds, making the prevention of firearm-related unintentional injury to children of vital importance to families, health professionals, and policy makers. To systematically review the evidence on school-based and community-based gun safety programs for children aged 3 to 18 years. Systematic review. Twelve databases were searched from their earliest records to December 2016. Interventional and analytic studies were sought, including randomized controlled trials, quasi-experimental studies, as well as before-and-after studies or cohort studies with or without a control that involved an intervention. The low level of evidence, heterogeneity of studies, and lack of consistent outcome measures precluded a pooled estimate of results. A best evidence synthesis was performed. Results support the premise that programs using either knowledge-based or active learning strategies or a combination of these may be insufficient for teaching gun safety skills to children. Gun safety programs do not improve the likelihood that children will not handle firearms in an unsupervised situation. Stronger research designs with larger samples are needed to determine the most effective way to transfer the use of the gun safety skills outside the training session and enable stronger conclusions to be drawn.

Results of Fall 1994 sampling of gunite and associated tanks at the Oak Ridge National Laboratory, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-06-01

This Technical Memorandum, was developed under Work Breakdown Structure 1.4.12.6.1.01.41.12.02. 11 (Activity Data Sheet 3301, ``WAG 1``). This document provides the Environmental Restoration Program with analytical results from liquid and sludge samples from the Gunite and Associated Tanks (GAAT). Information provided in this report forms part of the technical basis for criticality safety, systems safety, engineering design, and waste management as they apply to the GAAT treatability study and remediation.

Safety and Waste Management for SAM Chemistry Methods

EPA Pesticide Factsheets

The General Safety and Waste Management page offers section-specific safety and waste management details for the chemical analytes included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

Safety and Waste Management for SAM Radiochemical Methods

EPA Pesticide Factsheets

The General Safety and Waste Management page offers section-specific safety and waste management details for the radiochemical analytes included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

FFTF Passive Safety Test Data for Benchmarks for New LMR Designs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wootan, David W.; Casella, Andrew M.

Liquid Metal Reactors (LMRs) continue to be considered as an attractive concept for advanced reactor design. Software packages such as SASSYS are being used to im-prove new LMR designs and operating characteristics. Significant cost and safety im-provements can be realized in advanced liquid metal reactor designs by emphasizing inherent or passive safety through crediting the beneficial reactivity feedbacks associ-ated with core and structural movement. This passive safety approach was adopted for the Fast Flux Test Facility (FFTF), and an experimental program was conducted to characterize the structural reactivity feedback. The FFTF passive safety testing pro-gram was developed to examine howmore » specific design elements influenced dynamic re-activity feedback in response to a reactivity input and to demonstrate the scalability of reactivity feedback results to reactors of current interest. The U.S. Department of En-ergy, Office of Nuclear Energy Advanced Reactor Technology program is in the pro-cess of preserving, protecting, securing, and placing in electronic format information and data from the FFTF, including the core configurations and data collected during the passive safety tests. Benchmarks based on empirical data gathered during operation of the Fast Flux Test Facility (FFTF) as well as design documents and post-irradiation examination will aid in the validation of these software packages and the models and calculations they produce. Evaluation of these actual test data could provide insight to improve analytical methods which may be used to support future licensing applications for LMRs« less

41 CFR 102-80.120 - What analytical and empirical tools should be used to support the life safety equivalency...

Code of Federal Regulations, 2014 CFR

2014-01-01

...) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 80-SAFETY AND ENVIRONMENTAL MANAGEMENT Accident and Fire... used to support the life safety equivalency evaluation? Analytical and empirical tools, including fire models and grading schedules such as the Fire Safety Evaluation System (Alternative Approaches to Life...

41 CFR 102-80.120 - What analytical and empirical tools should be used to support the life safety equivalency...

Code of Federal Regulations, 2013 CFR

2013-07-01

...) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 80-SAFETY AND ENVIRONMENTAL MANAGEMENT Accident and Fire... used to support the life safety equivalency evaluation? Analytical and empirical tools, including fire models and grading schedules such as the Fire Safety Evaluation System (Alternative Approaches to Life...

41 CFR 102-80.120 - What analytical and empirical tools should be used to support the life safety equivalency...

Code of Federal Regulations, 2012 CFR

2012-01-01

...) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 80-SAFETY AND ENVIRONMENTAL MANAGEMENT Accident and Fire... used to support the life safety equivalency evaluation? Analytical and empirical tools, including fire models and grading schedules such as the Fire Safety Evaluation System (Alternative Approaches to Life...

Network Analytical Tool for Monitoring Global Food Safety Highlights China

PubMed Central

Nepusz, Tamás; Petróczi, Andrea; Naughton, Declan P.

2009-01-01

Background The Beijing Declaration on food safety and security was signed by over fifty countries with the aim of developing comprehensive programs for monitoring food safety and security on behalf of their citizens. Currently, comprehensive systems for food safety and security are absent in many countries, and the systems that are in place have been developed on different principles allowing poor opportunities for integration. Methodology/Principal Findings We have developed a user-friendly analytical tool based on network approaches for instant customized analysis of food alert patterns in the European dataset from the Rapid Alert System for Food and Feed. Data taken from alert logs between January 2003 – August 2008 were processed using network analysis to i) capture complexity, ii) analyze trends, and iii) predict possible effects of interventions by identifying patterns of reporting activities between countries. The detector and transgressor relationships are readily identifiable between countries which are ranked using i) Google's PageRank algorithm and ii) the HITS algorithm of Kleinberg. The program identifies Iran, China and Turkey as the transgressors with the largest number of alerts. However, when characterized by impact, counting the transgressor index and the number of countries involved, China predominates as a transgressor country. Conclusions/Significance This study reports the first development of a network analysis approach to inform countries on their transgressor and detector profiles as a user-friendly aid for the adoption of the Beijing Declaration. The ability to instantly access the country-specific components of the several thousand annual reports will enable each country to identify the major transgressors and detectors within its trading network. Moreover, the tool can be used to monitor trading countries for improved detector/transgressor ratios. PMID:19688088

41 CFR 102-80.120 - What analytical and empirical tools should be used to support the life safety equivalency...

Code of Federal Regulations, 2010 CFR

2010-07-01

... used to support the life safety equivalency evaluation? Analytical and empirical tools, including fire models and grading schedules such as the Fire Safety Evaluation System (Alternative Approaches to Life... empirical tools should be used to support the life safety equivalency evaluation? 102-80.120 Section 102-80...

41 CFR 102-80.120 - What analytical and empirical tools should be used to support the life safety equivalency...

Code of Federal Regulations, 2011 CFR

2011-01-01

... used to support the life safety equivalency evaluation? Analytical and empirical tools, including fire models and grading schedules such as the Fire Safety Evaluation System (Alternative Approaches to Life... empirical tools should be used to support the life safety equivalency evaluation? 102-80.120 Section 102-80...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lyon, W.S.

The Analytical Chemistry Dvision of Oak Ridge National laboratory (ORNL) serves a multitude of functions for a clientele that exists both in and outside ORNL. These functions fall into the following general categories: (1) analytical research, development, and implementation; (2) programmatic research, development, and utilization; and (3) technical support. The Division is organized into five major sections, each of which may carry out any type of work falling in the three categories mentioned above. Chapters 1 through 5 of this report highlight progress within the five sections (analytical methodology, mass and emission spectrometry, radioactive materials, bio/organic analysis, and general andmore » environmental analysis) during the period January 1, 1982 to December 31, 1982. A short summary introduces each chapter to indicate work scope. Information about quality assurance and safety programs is presented in Chapter 6, along with a tabulation of analyses rendered. Publications, oral presentations, professional activities, educational programs, and seminars are cited in Chapters 7 and 8. Approximately 61 articles, 32 proceedings publications and 37 reports have been published, and 107 oral presentations were given during this reporting period.« less

Overview of the 2014 Edition of the International Handbook of Evaluated Reactor Physics Benchmark Experiments (IRPhEP Handbook)

DOE Office of Scientific and Technical Information (OSTI.GOV)

John D. Bess; J. Blair Briggs; Jim Gulliford

2014-10-01

The International Reactor Physics Experiment Evaluation Project (IRPhEP) is a widely recognized world class program. The work of the IRPhEP is documented in the International Handbook of Evaluated Reactor Physics Benchmark Experiments (IRPhEP Handbook). Integral data from the IRPhEP Handbook is used by reactor safety and design, nuclear data, criticality safety, and analytical methods development specialists, worldwide, to perform necessary validations of their calculational techniques. The IRPhEP Handbook is among the most frequently quoted reference in the nuclear industry and is expected to be a valuable resource for future decades.

Propulsion Health Monitoring for Enhanced Safety

NASA Technical Reports Server (NTRS)

Butz, Mark G.; Rodriguez, Hector M.

2003-01-01

This report presents the results of the NASA contract Propulsion System Health Management for Enhanced Safety performed by General Electric Aircraft Engines (GE AE), General Electric Global Research (GE GR), and Pennsylvania State University Applied Research Laboratory (PSU ARL) under the NASA Aviation Safety Program. This activity supports the overall goal of enhanced civil aviation safety through a reduction in the occurrence of safety-significant propulsion system malfunctions. Specific objectives are to develop and demonstrate vibration diagnostics techniques for the on-line detection of turbine rotor disk cracks, and model-based fault tolerant control techniques for the prevention and mitigation of in-flight engine shutdown, surge/stall, and flameout events. The disk crack detection work was performed by GE GR which focused on a radial-mode vibration monitoring technique, and PSU ARL which focused on a torsional-mode vibration monitoring technique. GE AE performed the Model-Based Fault Tolerant Control work which focused on the development of analytical techniques for detecting, isolating, and accommodating gas-path faults.

Laboratory safety and the WHO World Alliance for Patient Safety.

PubMed

McCay, Layla; Lemer, Claire; Wu, Albert W

2009-06-01

Laboratory medicine has been a pioneer in the field of patient safety; indeed, the College of American Pathology first called attention to the issue in 1946. Delivering reliable laboratory results has long been considered a priority, as the data produced in laboratory medicine have the potential to critically influence individual patients' diagnosis and management. Until recently, most attention on laboratory safety has focused on the analytic stage of laboratory medicine. Addressing this stage has led to significant and impressive improvements in the areas over which laboratories have direct control. However, recent data demonstrate that pre- and post-analytical phases are at least as vulnerable to errors; to further improve patient safety in laboratory medicine, attention must now be focused on the pre- and post-analytic phases, and the concept of patient safety as a multi-disciplinary, multi-stage and multi-system concept better understood. The World Alliance for Patient Safety (WAPS) supports improvement of patient safety globally and provides a potential framework for considering the total testing process.

Risk management for the Space Exploration Initiative

NASA Technical Reports Server (NTRS)

Buchbinder, Ben

1993-01-01

Probabilistic Risk Assessment (PRA) is a quantitative engineering process that provides the analytic structure and decision-making framework for total programmatic risk management. Ideally, it is initiated in the conceptual design phase and used throughout the program life cycle. Although PRA was developed for assessment of safety, reliability, and availability risk, it has far greater application. Throughout the design phase, PRA can guide trade-off studies among system performance, safety, reliability, cost, and schedule. These studies are based on the assessment of the risk of meeting each parameter goal, with full consideration of the uncertainties. Quantitative trade-off studies are essential, but without full identification, propagation, and display of uncertainties, poor decisions may result. PRA also can focus attention on risk drivers in situations where risk is too high. For example, if safety risk is unacceptable, the PRA prioritizes the risk contributors to guide the use of resources for risk mitigation. PRA is used in the Space Exploration Initiative (SEI) Program. To meet the stringent requirements of the SEI mission, within strict budgetary constraints, the PRA structure supports informed and traceable decision-making. This paper briefly describes the SEI PRA process.

Safety and Suitability for Service Assessment Testing for Surface and Underwater Launched Munitions

DTIC Science & Technology

2014-12-05

test efficiency that tend to associate the Analytical S3 Test Approach with large, complex munition systems and the Empirical S3 Test Approach with...the smaller, less complex munition systems . 8.1 ANALYTICAL S3 TEST APPROACH. The Analytical S3 test approach, as shown in Figure 3, evaluates...assets than the Analytical S3 Test approach to establish the safety margin of the system . This approach is generally applicable to small munitions

Experimental, Numerical, and Analytical Slosh Dynamics of Water and Liquid Nitrogen in a Spherical Tank

NASA Technical Reports Server (NTRS)

Storey, Jedediah Morse

2016-01-01

Understanding, predicting, and controlling fluid slosh dynamics is critical to safety and improving performance of space missions when a significant percentage of the spacecraft's mass is a liquid. Computational fluid dynamics simulations can be used to predict the dynamics of slosh, but these programs require extensive validation. Many experimental and numerical studies of water slosh have been conducted. However, slosh data for cryogenic liquids is lacking. Water and cryogenic liquid nitrogen are used in various ground-based tests with a spherical tank to characterize damping, slosh mode frequencies, and slosh forces. A single ring baffle is installed in the tank for some of the tests. Analytical models for slosh modes, slosh forces, and baffle damping are constructed based on prior work. Select experiments are simulated using a commercial CFD software, and the numerical results are compared to the analytical and experimental results for the purposes of validation and methodology-improvement.

Site safety plan for Lawrence Livermore National Laboratory CERCLA investigations at site 300. Revision 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kilmer, J.

Various Department of Energy Orders incorporate by reference, health and safety regulations promulgated by the Occupational Safety and Health Administration (OSHA). One of the OSHA regulations, 29 CFR 1910.120, Hazardous Waste Operations and Emergency Response, requires that site safety plans are written for activities such as those covered by work plans for Site 300 environmental investigations. Based upon available data, this Site Safety Plan (Plan) for environmental restoration has been prepared specifically for the Lawrence Livermore National Laboratory Site 300, located approximately 15 miles east of Livermore, California. As additional facts, monitoring data, or analytical data on hazards are provided,more » this Plan may need to be modified. It is the responsibility of the Environmental Restoration Program and Division (ERD) Site Safety Officer (SSO), with the assistance of Hazards Control, to evaluate data which may impact health and safety during these activities and to modify the Plan as appropriate. This Plan is not `cast-in-concrete.` The SSO shall have the authority, with the concurrence of Hazards Control, to institute any change to maintain health and safety protection for workers at Site 300.« less

Chemical and microbiological experimentation for development of environmental control and life support systems

NASA Technical Reports Server (NTRS)

Whitman, G. A.; Wilson, M. E.; Cole, H. E.; Traweek, M.

1992-01-01

Microbiological techniques are under study with a view to the identification of viable microorganisms in liquid cultures, improve the identification of stressed organisms, and determine the biocidal activity of iodine and other chemicals on isolates from recycled water. A quality-assurance program has been implemented to validate data employed in making decisions concerning engineering and human health and safety. Analytical laboratory refinements will strongly aid the development of environmental control and life-support systems.

Pressure control and analysis report: Hydrogen Thermal Test Article (HTTA)

NASA Technical Reports Server (NTRS)

1971-01-01

Tasks accomplished during the HTTA Program study period included: (1) performance of a literature review to provide system guidelines; (2) development of analytical procedures needed to predict system performance; (3) design and analysis of the HTTA pressurization system considering (a) future utilization of results in the design of a spacecraft maneuvering system propellant package, (b) ease of control and operation, (c) system safety, and (d) hardware cost; and (4) making conclusions and recommendations for systems design.

Computational toxicity in 21st century safety sciences (China ...

EPA Pesticide Factsheets

presentation at the Joint Meeting of Analytical Toxicology and Computational Toxicology Committee (Chinese Society of Toxicology) International Workshop on Advanced Chemical Safety Assessment Technologies on 11 May 2016, Fuzhou University, Fuzhou China presentation at the Joint Meeting of Analytical Toxicology and Computational Toxicology Committee (Chinese Society of Toxicology) International Workshop on Advanced Chemical Safety Assessment Technologies on 11 May 2016, Fuzhou University, Fuzhou China

Probabilistic Causal Analysis for System Safety Risk Assessments in Commercial Air Transport

NASA Technical Reports Server (NTRS)

Luxhoj, James T.

2003-01-01

Aviation is one of the critical modes of our national transportation system. As such, it is essential that new technologies be continually developed to ensure that a safe mode of transportation becomes even safer in the future. The NASA Aviation Safety Program (AvSP) is managing the development of new technologies and interventions aimed at reducing the fatal aviation accident rate by a factor of 5 by year 2007 and by a factor of 10 by year 2022. A portfolio assessment is currently being conducted to determine the projected impact that the new technologies and/or interventions may have on reducing aviation safety system risk. This paper reports on advanced risk analytics that combine the use of a human error taxonomy, probabilistic Bayesian Belief Networks, and case-based scenarios to assess a relative risk intensity metric. A sample case is used for illustrative purposes.

Final safety analysis report for the Galileo Mission: Volume 2, Book 2: Accident model document: Appendices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1988-12-15

This section of the Accident Model Document (AMD) presents the appendices which describe the various analyses that have been conducted for use in the Galileo Final Safety Analysis Report II, Volume II. Included in these appendices are the approaches, techniques, conditions and assumptions used in the development of the analytical models plus the detailed results of the analyses. Also included in these appendices are summaries of the accidents and their associated probabilities and environment models taken from the Shuttle Data Book (NSTS-08116), plus summaries of the several segments of the recent GPHS safety test program. The information presented in thesemore » appendices is used in Section 3.0 of the AMD to develop the Failure/Abort Sequence Trees (FASTs) and to determine the fuel releases (source terms) resulting from the potential Space Shuttle/IUS accidents throughout the missions.« less

Visual analytics for aviation safety: A collaborative approach to sensemaking

NASA Astrophysics Data System (ADS)

Wade, Andrew

Visual analytics, the "science of analytical reasoning facilitated by interactive visual interfaces", is more than just visualization. Understanding the human reasoning process is essential for designing effective visualization tools and providing correct analyses. This thesis describes the evolution, application and evaluation of a new method for studying analytical reasoning that we have labeled paired analysis. Paired analysis combines subject matter experts (SMEs) and tool experts (TE) in an analytic dyad, here used to investigate aircraft maintenance and safety data. The method was developed and evaluated using interviews, pilot studies and analytic sessions during an internship at the Boeing Company. By enabling a collaborative approach to sensemaking that can be captured by researchers, paired analysis yielded rich data on human analytical reasoning that can be used to support analytic tool development and analyst training. Keywords: visual analytics, paired analysis, sensemaking, boeing, collaborative analysis.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boyack, B.E.

The PIUS reactor utilizes simplified, inherent, passive, or other innovative means to accomplish safety functions. Accordingly, the PIUS reactor is subject to the requirements of 10CFR52.47(b)(2)(i)(A). This regulation requires that the applicant adequately demonstrate the performance of each safety feature, interdependent effects among the safety features, and a sufficient data base on the safety features of the design to assess the analytical tools used for safety analysis. Los Alamos has assessed the quality and completeness of the existing and planned data bases used by Asea Brown Boveri to validate its safety analysis codes and other relevant data bases. Only amore » limited data base of separate effect and integral tests exist at present. This data base is not adequate to fulfill the requirements of 10CFR52.47(b)(2)(i)(A). Asea Brown Boveri has stated that it plans to conduct more separate effect and integral test programs. If appropriately designed and conducted, these test programs have the potential to satisfy most of the data base requirements of 10CFR52.47(b)(2)(i)(A) and remedy most of the deficiencies of the currently existing combined data base. However, the most important physical processes in PIUS are related to reactor shutdown because the PIUS reactor does not contain rodded shutdown and control systems. For safety-related reactor shutdown, PIUS relies on negative reactivity insertions from the moderator temperature coefficient and from boron entering the core from the reactor pool. Asea Brown Boveri has neither developed a direct experimental data base for these important processes nor provided a rationale for indirect testing of these key PIUS processes. This is assessed as a significant shortcoming. In preparing the conclusions of this report, test documentation and results have been reviewed for only one integral test program, the small-scale integral tests conducted in the ATLE facility.« less

Full-scale Transport Controlled Impact Demonstration Program

NASA Technical Reports Server (NTRS)

1987-01-01

The Federal Aviation Administration (FAA) and NASA conducted a full-scale air-to-surface impact-survivable impact demonstration with a remotely piloted transport aircraft on 1 December 1984, at Edwards Air Force Base, California. The test article consisted of experiments, special equipment, and supporting systems, such as antimisting kerosene (AMK), crashworthiness structural/restraint, analytical modeling, cabin fire safety, flight data recorders, post-impact investigation, instrumentation/data acquisition systems, remotely piloted vehicle/flight control systems, range and flight safety provisions, etc. This report describes the aircraft, experiments, systems, activities, and events which lead up to the Controlled Impact Demonstration (CID). An overview of the final unmanned remote control flight and sequence of impact events are delineated. Preliminary post CID observations are presented.

Value of social media in reaching and engaging employers in Total Worker Health.

PubMed

Hudson, Heidi; Hall, Jennifer

2013-12-01

To describe the initial use of social media by the National Institute for Occupational Safety and Health (NIOSH) Total Worker Health™ (TWH) Program and the University of Iowa Healthier Workforce Center for Excellence (HWCE) Outreach Program. Social media analytics tools and process evaluation methods were used to derive initial insights on the social media strategies used by the NIOSH and the HWCE. The on-line community size for the NIOSH TWH Program indicated 100% growth in 6 months; however, social media platforms have been slow to gain participation among employers. The NIOSH TWH Program and the HWCE Outreach Program have found social media tools as an effective way to expand reach, foster engagement, and gain understanding of audience interests around TWH concepts. More needs to be known about how to best use social media to reach and engage target audiences on issues relevant to TWH.

Quality and safety aspects in histopathology laboratory

PubMed Central

Adyanthaya, Soniya; Jose, Maji

2013-01-01

Histopathology is an art of analyzing and interpreting the shapes, sizes and architectural patterns of cells and tissues within a given specific clinical background and a science by which the image is placed in the context of knowledge of pathobiology, to arrive at an accurate diagnosis. To function effectively and safely, all the procedures and activities of histopathology laboratory should be evaluated and monitored accurately. In histopathology laboratory, the concept of quality control is applicable to pre-analytical, analytical and post-analytical activities. Ensuring safety of working personnel as well as environment is also highly important. Safety issues that may come up in a histopathology lab are primarily those related to potentially hazardous chemicals, biohazardous materials, accidents linked to the equipment and instrumentation employed and general risks from electrical and fire hazards. This article discusses quality management system which can ensure quality performance in histopathology laboratory. The hazards in pathology laboratories and practical safety measures aimed at controlling the dangers are also discussed with the objective of promoting safety consciousness and the practice of laboratory safety. PMID:24574660

Safety and Suitability for Service Assessment Testing for Aircraft Launched Munitions

DTIC Science & Technology

2013-07-01

2013 12 benefits in terms of cost and test efficiency that tend to associate the Analytical S3 Test Approach with complex missile systems and the... systems containing expensive, non-safety related components. c. When using the Analytical S3 Test Approach for aircraft launched bombs, full BTCA is...establish safety margin of the system . Details of the Empirical Test Flow with full and reduced BTCA options are provided in Appendix B, Annexes 3 and

Population-level administration of AlcoholEdu for college: an ARIMA time-series analysis.

PubMed

Wyatt, Todd M; Dejong, William; Dixon, Elizabeth

2013-08-01

Autoregressive integrated moving averages (ARIMA) is a powerful analytic tool for conducting interrupted time-series analysis, yet it is rarely used in studies of public health campaigns or programs. This study demonstrated the use of ARIMA to assess AlcoholEdu for College, an online alcohol education course for first-year students, and other health and safety programs introduced at a moderate-size public university in the South. From 1992 to 2009, the university administered annual Core Alcohol and Drug Surveys to samples of undergraduates (Ns = 498 to 1032). AlcoholEdu and other health and safety programs that began during the study period were assessed through a series of quasi-experimental ARIMA analyses. Implementation of AlcoholEdu in 2004 was significantly associated with substantial decreases in alcohol consumption and alcohol- or drug-related negative consequences. These improvements were sustained over time as succeeding first-year classes took the course. Previous studies have shown that AlcoholEdu has an initial positive effect on students' alcohol use and associated negative consequences. This investigation suggests that these positive changes may be sustainable over time through yearly implementation of the course with first-year students. ARIMA time-series analysis holds great promise for investigating the effect of program and policy interventions to address alcohol- and drug-related problems on campus.

Recent advances in analytical methods for the determination of 4-alkylphenols and bisphenol A in solid environmental matrices: A critical review.

PubMed

Salgueiro-González, N; Castiglioni, S; Zuccato, E; Turnes-Carou, I; López-Mahía, P; Muniategui-Lorenzo, S

2018-09-18

The problem of endocrine disrupting compounds (EDCs) in the environment has become a worldwide concern in recent decades. Besides their toxicological effects at low concentrations and their widespread use in industrial and household applications, these pollutants pose a risk for non-target organisms and also for public safety. Analytical methods to determine these compounds at trace levels in different matrices are urgently needed. This review critically discusses trends in analytical methods for well-known EDCs like alkylphenols and bisphenol A in solid environmental matrices, including sediment and aquatic biological samples (from 2006 to 2018). Information about extraction, clean-up and determination is covered in detail, including analytical quality parameters (QA/QC). Conventional and novel analytical techniques are compared, with their advantages and drawbacks. Ultrasound assisted extraction followed by solid phase extraction clean-up is the most widely used procedure for sediment and aquatic biological samples, although softer extraction conditions have been employed for the latter. The use of liquid chromatography followed by tandem mass spectrometry has greatly increased in the last five years. The majority of these methods have been employed for the analysis of river sediments and bivalve molluscs because of their usefulness in aquatic ecosystem (bio)monitoring programs. Green, simple, fast analytical methods are now needed to determine these compounds in complex matrices. Copyright © 2018 Elsevier B.V. All rights reserved.

Method validation for methanol quantification present in working places

NASA Astrophysics Data System (ADS)

Muna, E. D. M.; Bizarri, C. H. B.; Maciel, J. R. M.; da Rocha, G. P.; de Araújo, I. O.

2015-01-01

Given the widespread use of methanol by different industry sectors and high toxicity associated with this substance, it is necessary to use an analytical method able to determine in a sensitive, precise and accurate levels of methanol in the air of working environments. Based on the methodology established by the National Institute for Occupational Safety and Health (NIOSH), it was validated a methodology for determination of methanol in silica gel tubes which had demonstrated its effectiveness based on the participation of the international collaborative program sponsored by the American Industrial Hygiene Association (AIHA).

Physical and Chemical Aspects of Fire Suppression in Extraterrestrial Environments

NASA Technical Reports Server (NTRS)

Takahashi, F.; Linteris, G. T.; Katta, V. R.

2001-01-01

A fire, whether in a spacecraft or in occupied spaces on extraterrestrial bases, can lead to mission termination or loss of life. While the fire-safety record of US space missions has been excellent, the advent of longer duration missions to Mars, the moon, or aboard the International Space Station (ISS) increases the likelihood of fire events, with more limited mission termination options. The fire safety program of NASA's manned space flight program is based largely upon the principles of controlling the flammability of on-board materials and greatly eliminating sources of ignition. As a result, very little research has been conducted on fire suppression in the microgravity or reduced-gravity environment. The objectives of this study are: to obtain fundamental knowledge of physical and chemical processes of fire suppression, using gravity and oxygen concentration as independent variables to simulate various extraterrestrial environments, including spacecraft and surface bases in Mars and moon missions; to provide rigorous testing of analytical models, which include comprehensive descriptions of combustion and suppression chemistry; and to provide basic research results useful for technological advances in fire safety, including the development of new fire-extinguishing agents and approaches, in the microgravity environment associated with ISS and in the partial-gravity Martian and lunar environments.

Recent Progresses in Nanobiosensing for Food Safety Analysis

PubMed Central

Yang, Tao; Huang, Huifen; Zhu, Fang; Lin, Qinlu; Zhang, Lin; Liu, Junwen

2016-01-01

With increasing adulteration, food safety analysis has become an important research field. Nanomaterials-based biosensing holds great potential in designing highly sensitive and selective detection strategies necessary for food safety analysis. This review summarizes various function types of nanomaterials, the methods of functionalization of nanomaterials, and recent (2014–present) progress in the design and development of nanobiosensing for the detection of food contaminants including pathogens, toxins, pesticides, antibiotics, metal contaminants, and other analytes, which are sub-classified according to various recognition methods of each analyte. The existing shortcomings and future perspectives of the rapidly growing field of nanobiosensing addressing food safety issues are also discussed briefly. PMID:27447636

Recent Progresses in Nanobiosensing for Food Safety Analysis.

PubMed

Yang, Tao; Huang, Huifen; Zhu, Fang; Lin, Qinlu; Zhang, Lin; Liu, Junwen

2016-07-19

With increasing adulteration, food safety analysis has become an important research field. Nanomaterials-based biosensing holds great potential in designing highly sensitive and selective detection strategies necessary for food safety analysis. This review summarizes various function types of nanomaterials, the methods of functionalization of nanomaterials, and recent (2014-present) progress in the design and development of nanobiosensing for the detection of food contaminants including pathogens, toxins, pesticides, antibiotics, metal contaminants, and other analytes, which are sub-classified according to various recognition methods of each analyte. The existing shortcomings and future perspectives of the rapidly growing field of nanobiosensing addressing food safety issues are also discussed briefly.

School safe driving climate: Theoretical and practical considerations for promoting teen driver safety in school settings.

PubMed

Mirman, Jessica H; Roche, Brianne; Higgins-D'Alessandro, Ann

2018-06-21

The aims of this study were to extend the current literature on school climate that is focused on understanding how teacher, administrator, and student perceptions about driving-focused aspects of the social, educational, and institutional climate of schools can affect students' achievement, behavior, and adjustment towards the development of the concept of school safe driving climate (SSDC) and initiate the development of tools and processes for assessing SSDC. A mixed-methods approach was used to develop an initial version of a survey-based measure of SSDC that involved self-report surveys (students) and in-depth interviews (teachers). Exploratory factor analytic procedures identified SSDC constructs and a regression framework was used to examine associations among SSDC constructs and self-reported driver behaviors. Qualitative data were subjected to inductive analysis, with a goal of elucidating teachers' perspectives on SSDC and an SSDC intervention. The study sample consisted of 947 adolescents (48% male) from one large high school and 44 teacher advisors. Participants were recruited from a school participating in a state-wide effort to promote transportation safety through peer-led programming. Two SSDC factors were identified: Administrative Contributions to School Safety and Value of School Safety, which were associated with adolescents' perceptions of their driving behaviors. Adolescents' perceived that the intervention affected administrative safety. Teacher interviews contextualized these results and provided guidance on program revisions. Safe driving climate may be an important, modifiable, and measurable aspect of school climate. Additional research is needed to refine the assessment tool and to use it in longitudinal and experimental studies.

Safety and Waste Management for SAM Pathogen Methods

EPA Pesticide Factsheets

The General Safety and Waste Management page offers section-specific safety and waste management details for the pathogens included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

Safety and Waste Management for SAM Biotoxin Methods

EPA Pesticide Factsheets

The General Safety and Waste Management page offers section-specific safety and waste management details for the biotoxins included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

Engineering evaluation of SSME dynamic data from engine tests and SSV flights

NASA Technical Reports Server (NTRS)

1986-01-01

An engineering evaluation of dynamic data from SSME hot firing tests and SSV flights is summarized. The basic objective of the study is to provide analyses of vibration, strain and dynamic pressure measurements in support of MSFC performance and reliability improvement programs. A brief description of the SSME test program is given and a typical test evaluation cycle reviewed. Data banks generated to characterize SSME component dynamic characteristics are described and statistical analyses performed on these data base measurements are discussed. Analytical models applied to define the dynamic behavior of SSME components (such as turbopump bearing elements and the flight accelerometer safety cut-off system) are also summarized. Appendices are included to illustrate some typical tasks performed under this study.

Assessing causality in drug policy analyses: How useful are the Bradford Hill criteria in analysing take-home naloxone programs?

PubMed

Olsen, Anna; McDonald, David; Lenton, Simon; Dietze, Paul M

2018-05-01

The Bradford Hill criteria for assessing causality are useful in assembling evidence, including within complex policy analyses. In this paper, we argue that the implementation of take-home naloxone (THN) programs in Australia and elsewhere reflects sensible, evidence-based public health policy, despite the absence of randomised controlled trials. However, we also acknowledge that the debate around expanding access to THN would benefit from a careful consideration of causal inference and health policy impact of THN program implementation. Given the continued debate around expanding access to THN, and the relatively recent access to new data from implementation studies, two research groups independently conducted Bradford Hill analyses in order to carefully consider causal inference and health policy impact. Hill's criteria offer a useful analytical tool for interpreting current evidence on THN programs and making decisions about the (un)certainty of THN program safety and effectiveness. © 2017 Australasian Professional Society on Alcohol and other Drugs.

General Safety and Waste Management Related to SAM

EPA Pesticide Factsheets

The General Safety and Waste Management page offers section-specific safety and waste management details for chemicals, radiochemicals, pathogens, and biotoxins included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

Preventing hospital-acquired venous thromboembolism: Improving patient safety with interdisciplinary teamwork, quality improvement analytics, and data transparency.

PubMed

Schleyer, Anneliese M; Robinson, Ellen; Dumitru, Roxana; Taylor, Mark; Hayes, Kimberly; Pergamit, Ronald; Beingessner, Daphne M; Zaros, Mark C; Cuschieri, Joseph

2016-12-01

Hospital-acquired venous thromboembolism (HA-VTE) is a potentially preventable cause of morbidity and mortality. Despite high rates of venous thromboembolism (VTE) prophylaxis in accordance with an institutional guideline, VTE remains the most common hospital-acquired condition in our institution. To improve the safety of all hospitalized patients, examine current VTE prevention practices, identify opportunities for improvement, and decrease rates of HA-VTE. Pre/post assessment. Urban academic tertiary referral center, level 1 trauma center, safety net hospital; all patients. We formed a multidisciplinary VTE task force to review all HA-VTE events, assess prevention practices relative to evidence-based institutional guidelines, and identify improvement opportunities. The task force developed an electronic tool to facilitate efficient VTE event review and designed decision-support and reporting tools, now integrated into the electronic health record, to bring optimal VTE prevention practices to the point of care. Performance is shared transparently across the institution. Harborview benchmarks process and outcome performance, including patient safety indicators and core measures, against hospitals nationally using Hospital Compare and Vizient data. Our program has resulted in >90% guideline-adherent VTE prevention and zero preventable HA-VTEs. Initiatives have resulted in a 15% decrease in HA-VTE and a 21% reduction in postoperative VTE. Keys to success include the multidisciplinary approach, clinical roles of task force members, senior leadership support, and use of quality improvement analytics for retrospective review, prospective reporting, and performance transparency. Ongoing task force collaboration with frontline providers is critical to sustained improvements. Journal of Hospital Medicine 2016;11:S38-S43. © 2016 Society of Hospital Medicine. © 2016 Society of Hospital Medicine.

Response Time Analysis and Test of Protection System Instrument Channels for APR1400 and OPR1000

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Chang Jae; Han, Seung; Yun, Jae Hee

2015-07-01

Safety limits are required to maintain the integrity of physical barriers designed to prevent the uncontrolled release of radioactive materials in nuclear power plants. The safety analysis establishes two critical constraints that include an analytical limit in terms of a measured or calculated variable, and a specific time after the analytical limit is reached to begin protective action. Keeping with the nuclear regulations and industry standards, satisfying these two requirements will ensure that the safety limit will not be exceeded during the design basis event, either an anticipated operational occurrence or a postulated accident. Various studies on the setpoint determinationmore » methodology for the safety-related instrumentation have been actively performed to ensure that the requirement of the analytical limit is satisfied. In particular, the protection setpoint methodology for the advanced power reactor 1400 (APP1400) and the optimized power reactor 1000 (OPR1000) has been recently developed to cover both the design basis event and the beyond design basis event. The developed setpoint methodology has also been quantitatively validated using specific computer programs and setpoint calculations. However, the safety of nuclear power plants cannot be fully guaranteed by satisfying the requirement of the analytical limit. In spite of the response time verification requirements of nuclear regulations and industry standards, it is hard to find the studies on the systematically integrated methodology regarding the response time evaluation. In cases of APR1400 and OPR1000, the response time analysis for the plant protection system is partially included in the setpoint calculation and the response time test is separately performed via the specific plant procedure. The test technique has a drawback which is the difficulty to demonstrate completeness of timing test. The analysis technique has also a demerit of resulting in extreme times that not actually possible. Thus, the establishment of the systematic response time evaluation methodology is needed to justify the conformance to the response time requirement used in the safety analysis. This paper proposes the response time evaluation methodology for APR1400 and OPR1000 using the combined analysis and test technique to confirm that the plant protection system can meet the analytical response time assumed in the safety analysis. In addition, the results of the quantitative evaluation performed for APR1400 and OPR1000 are presented in this paper. The proposed response time analysis technique consists of defining the response time requirement, determining the critical signal path for the trip parameter, allocating individual response time to each component on the signal path, and analyzing the total response time for the trip parameter, and demonstrates that the total analyzed response time does not exceed the response time requirement. The proposed response time test technique is composed of defining the response time requirement, determining the critical signal path for the trip parameter, determining the test method for each component on the signal path, performing the response time test, and demonstrates that the total test result does not exceed the response time requirement. The total response time should be tested in a single test that covers from the sensor to the final actuation device on the instrument channel. When the total channel is not tested in a single test, separate tests on groups of components or single components including the total instrument channel shall be combined to verify the total channel response. For APR1400 and OPR1000, the ramp test technique is used for the pressure and differential pressure transmitters and the step function testing technique is applied to the signal processing equipment and final actuation device. As a result, it can be demonstrated that the response time requirement is satisfied by the combined analysis and test technique. Therefore, the proposed methodology in this paper plays a crucial role in guaranteeing the safety of the nuclear power plants systematically satisfying one of two critical requirements from the safety analysis. (authors)« less

Chemiluminescence microarrays in analytical chemistry: a critical review.

PubMed

Seidel, Michael; Niessner, Reinhard

2014-09-01

Multi-analyte immunoassays on microarrays and on multiplex DNA microarrays have been described for quantitative analysis of small organic molecules (e.g., antibiotics, drugs of abuse, small molecule toxins), proteins (e.g., antibodies or protein toxins), and microorganisms, viruses, and eukaryotic cells. In analytical chemistry, multi-analyte detection by use of analytical microarrays has become an innovative research topic because of the possibility of generating several sets of quantitative data for different analyte classes in a short time. Chemiluminescence (CL) microarrays are powerful tools for rapid multiplex analysis of complex matrices. A wide range of applications for CL microarrays is described in the literature dealing with analytical microarrays. The motivation for this review is to summarize the current state of CL-based analytical microarrays. Combining analysis of different compound classes on CL microarrays reduces analysis time, cost of reagents, and use of laboratory space. Applications are discussed, with examples from food safety, water safety, environmental monitoring, diagnostics, forensics, toxicology, and biosecurity. The potential and limitations of research on multiplex analysis by use of CL microarrays are discussed in this review.

Safety of High Speed Ground Transportation Systems : Analytical Methodology for Safety Validation of Computer Controlled Subsystems : Volume 2. Development of a Safety Validation Methodology

DOT National Transportation Integrated Search

1995-01-01

This report describes the development of a methodology designed to assure that a sufficiently high level of safety is achieved and maintained in computer-based systems which perform safety cortical functions in high-speed rail or magnetic levitation ...

The Dread Factor: How Hazards and Safety Training Influence Learning and Performance

ERIC Educational Resources Information Center

Burke, Michael J.; Salvador, Rommel O.; Smith-Crowe, Kristin; Chan-Serafin, Suzanne; Smith, Alexis; Sonesh, Shirley

2011-01-01

On the basis of hypotheses derived from social and experiential learning theories, we meta-analytically investigated how safety training and workplace hazards impact the development of safety knowledge and safety performance. The results were consistent with an expected interaction between the level of engagement of safety training and hazardous…

Integrating bioassays and analytical chemistry as an improved approach to support safety assessment of food contact materials.

PubMed

Veyrand, Julien; Marin-Kuan, Maricel; Bezencon, Claudine; Frank, Nancy; Guérin, Violaine; Koster, Sander; Latado, Hélia; Mollergues, Julie; Patin, Amaury; Piguet, Dominique; Serrant, Patrick; Varela, Jesus; Schilter, Benoît

2017-10-01

Food contact materials (FCM) contain chemicals which can migrate into food and result in human exposure. Although it is mandatory to ensure that migration does not endanger human health, there is still no consensus on how to pragmatically assess the safety of FCM since traditional approaches would require extensive toxicological and analytical testing which are expensive and time consuming. Recently, the combination of bioassays, analytical chemistry and risk assessment has been promoted as a new paradigm to identify toxicologically relevant molecules and address safety issues. However, there has been debate on the actual value of bioassays in that framework. In the present work, a FCM anticipated to release the endocrine active chemical 4-nonyphenol (4NP) was used as a model. In a migration study, the leaching of 4NP was confirmed by LC-MS/MS and GC-MS. This was correlated with an increase in both estrogenic and anti-androgenic activities as measured with bioassays. A standard risk assessment indicated that according to the food intake scenario applied, the level of 4NP measured was lower, close or slightly above the acceptable daily intake. Altogether these results show that bioassays could reveal the presence of an endocrine active chemical in a real-case FCM migration study. The levels reported were relevant for safety assessment. In addition, this work also highlighted that bioactivity measured in migrate does not necessarily represent a safety issue. In conclusion, together with analytics, bioassays contribute to identify toxicologically relevant molecules leaching from FCM and enable improved safety assessment.

Harnessing scientific literature reports for pharmacovigilance. Prototype software analytical tool development and usability testing.

PubMed

Sorbello, Alfred; Ripple, Anna; Tonning, Joseph; Munoz, Monica; Hasan, Rashedul; Ly, Thomas; Francis, Henry; Bodenreider, Olivier

2017-03-22

We seek to develop a prototype software analytical tool to augment FDA regulatory reviewers' capacity to harness scientific literature reports in PubMed/MEDLINE for pharmacovigilance and adverse drug event (ADE) safety signal detection. We also aim to gather feedback through usability testing to assess design, performance, and user satisfaction with the tool. A prototype, open source, web-based, software analytical tool generated statistical disproportionality data mining signal scores and dynamic visual analytics for ADE safety signal detection and management. We leveraged Medical Subject Heading (MeSH) indexing terms assigned to published citations in PubMed/MEDLINE to generate candidate drug-adverse event pairs for quantitative data mining. Six FDA regulatory reviewers participated in usability testing by employing the tool as part of their ongoing real-life pharmacovigilance activities to provide subjective feedback on its practical impact, added value, and fitness for use. All usability test participants cited the tool's ease of learning, ease of use, and generation of quantitative ADE safety signals, some of which corresponded to known established adverse drug reactions. Potential concerns included the comparability of the tool's automated literature search relative to a manual 'all fields' PubMed search, missing drugs and adverse event terms, interpretation of signal scores, and integration with existing computer-based analytical tools. Usability testing demonstrated that this novel tool can automate the detection of ADE safety signals from published literature reports. Various mitigation strategies are described to foster improvements in design, productivity, and end user satisfaction.

DOE Office of Scientific and Technical Information (OSTI.GOV)

King, A.G.

The Pacific Northwest Laboratory (PNL)/Analytical Chemistry Laboratory (ACL) and the Westinghouse Hanford Company (WHC)/Process Analytical Laboratory (PAL) provide analytical support services to various environmental restoration and waste management projects/programs at Hanford. In response to a US Department of Energy -- Richland Field Office (DOE-RL) audit, which questioned the comparability of analytical methods employed at each laboratory, the Sample Exchange/Exchange (SEE) program was initiated. The SEE Program is a selfassessment program designed to compare analytical methods of the PAL and ACL laboratories using sitespecific waste material. The SEE program is managed by a collaborative, the Quality Assurance Triad (Triad). Triad membershipmore » is made up of representatives from the WHC/PAL, PNL/ACL, and WHC Hanford Analytical Services Management (HASM) organizations. The Triad works together to design/evaluate/implement each phase of the SEE Program.« less

Advanced Design Features of APR1400 and Realization in Shin Kori Construction Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

OH, S.J.; Park, K.C.; Kim, H.G.

2006-07-01

APR1400 adopted several advanced design features. To ensure their proper operation as a part of ShinKori 3,4 project, both experimental and analytical work are continuing. In this paper, work on the advanced design features related to enhanced safety is examined. APR1400 safety injection system consists of four independent trains which include four safety injection pump and tanks. A passive flow regulating device called fluidic device is installed in the safety injection tanks. Separate effect tests including a full scale fluidic device tests have been conducted. Integral system tests are in progress. Combination of these work with the analytical work usingmore » RELAP5/Mod3 would ensure the proper operation of the new safety injection systems. To mitigate severe accidents, hydrogen mitigation system using PARs and igniters is adopted. Also, active injection system and the streamlined insulation design are adopted to enhance the in-vessel retention capability with the external cooling of RPV strategy. Analytic work with supporting experiments is performed. We are certain that these preparatory work would help the successful adaptation of ADF in ShinKori project. (authors)« less

Analytical Chemistry Division annual progress report for period ending November 30, 1977

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lyon, W.S.

1978-03-01

Activities for the year are summarized in sections on analytical methodology, mass and mass emission spectrometry, analytical services, bio-organic analysis, nuclear and radiochemical analysis, and quality assurance and safety. Presentations of research results in publications and reports are tabulated. (JRD)

Implementation of GIS-based highway safety analyses : bridging the gap

DOT National Transportation Integrated Search

2001-01-01

In recent years, efforts have been made to expand the analytical features of the Highway Safety Information System (HSIS) by integrating Geographic Information System (GIS) capabilities. The original version of the GIS Safety Analysis Tools was relea...

The MSCA Program: Developing Analytic Unicorns

ERIC Educational Resources Information Center

Houghton, David M.; Schertzer, Clint; Beck, Scott

2018-01-01

Marketing analytics students who can communicate effectively with decision makers are in high demand. These "analytic unicorns" are hard to find. The Master of Science in Customer Analytics (MSCA) degree program at Xavier University seeks to fill that need. In this paper, we discuss the process of creating the MSCA program. We outline…

Middle East food safety perspectives.

PubMed

Idriss, Atef W; El-Habbab, Mohammad S

2014-08-01

Food safety and quality assurance are increasingly a major issue with the globalisation of agricultural trade, on the one hand, and intensification of agriculture, on the other. Consumer protection has become a priority in policy-making amongst the large economies of the Middle East and North Africa (MENA) countries following a number of food safety incidents. To enhance food safety, it is necessary to establish markets underpinned by knowledge and resources, including analysis of international rejections of food products from MENA countries, international laboratory accreditation, improved reporting systems and traceability, continued development and validation of analytical methods, and more work on correlating sensory evaluation with analytical results. MENA countries should develop a national strategy for food safety based on a holistic approach that extends from farm-to-fork and involves all the relevant stakeholders. Accordingly, food safety should be a regional programme, raising awareness among policy- and decision-makers of the importance of food safety and quality for consumer protection, food trade and economic development. © 2014 Society of Chemical Industry.

Quality of Chemical Safety Information in Printing Industry.

PubMed

Tsai, Chung-Jung; Mao, I-Fang; Ting, Jo-Yu; Young, Chi-Hsien; Lin, Jhih-Sian; Li, Wei-Lun

2016-04-01

Employees in printing industries can be exposed to multiple solvents in their work environment. The objectives of this study were to investigate the critical components of chemical solvents by analyzing the components of the solvents and collecting the Safety data sheets (SDSs), and to evaluate the hazard communication implementation status in printing industries. About 152 printing-related industries were recruited by area-stratified random sampling and included 23 plate-making, 102 printing and 27 printing-assistance companies in Taiwan. We analyzed company questionnaires (n = 152), SDSs (n = 180), and solvents (n = 20) collected from this sample of printing-related companies. Analytical results indicated that benzene and ethylbenzene, which were carcinogen and possibly carcinogen, were detectable in the cleaning solvents, and the detection rate were 54.5% (concentrations: <0.011-0.035 wt%) and 63.6% (concentrations: <0.011-6.22 wt%), respectively; however, neither compound was disclosed in the SDS for the solvents. Several other undisclosed components, including methanol, isopropanol and n-butanol, were also identified in the printing inks, fountain solutions and dilution solvents. We noted that, of the companies we surveyed, only 57.2% had a hazard communication program, 61.8% had SDSs on file and 59.9% provided employee safety and health training. We note that hazard communication programs were missing or ineffective in almost half of the 152 printing industries surveyed. Current safety information of solvents components in printing industries was inadequate, and many hazardous compounds were undisclosed in the SDSs of the solvents or the labels of the containers. The implementation of hazard communications in printing industries was still not enough for protecting the employees' safety and health. © The Author 2015. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

Quality of Chemical Safety Information in Printing Industry

PubMed Central

Tsai, Chung-Jung; Mao, I-Fang; Ting, Jo-Yu; Young, Chi-Hsien; Lin, Jhih-Sian; Li, Wei-Lun

2016-01-01

Objectives: Employees in printing industries can be exposed to multiple solvents in their work environment. The objectives of this study were to investigate the critical components of chemical solvents by analyzing the components of the solvents and collecting the Safety data sheets (SDSs), and to evaluate the hazard communication implementation status in printing industries. Method: About 152 printing-related industries were recruited by area-stratified random sampling and included 23 plate-making, 102 printing and 27 printing-assistance companies in Taiwan. We analyzed company questionnaires (n = 152), SDSs (n = 180), and solvents (n = 20) collected from this sample of printing-related companies. Results: Analytical results indicated that benzene and ethylbenzene, which were carcinogen and possibly carcinogen, were detectable in the cleaning solvents, and the detection rate were 54.5% (concentrations: <0.011–0.035 wt%) and 63.6% (concentrations: <0.011–6.22 wt%), respectively; however, neither compound was disclosed in the SDS for the solvents. Several other undisclosed components, including methanol, isopropanol and n-butanol, were also identified in the printing inks, fountain solutions and dilution solvents. We noted that, of the companies we surveyed, only 57.2% had a hazard communication program, 61.8% had SDSs on file and 59.9% provided employee safety and health training. We note that hazard communication programs were missing or ineffective in almost half of the 152 printing industries surveyed. Conclusions: Current safety information of solvents components in printing industries was inadequate, and many hazardous compounds were undisclosed in the SDSs of the solvents or the labels of the containers. The implementation of hazard communications in printing industries was still not enough for protecting the employees’ safety and health. PMID:26568584

System safety engineering analysis handbook

NASA Technical Reports Server (NTRS)

Ijams, T. E.

1972-01-01

The basic requirements and guidelines for the preparation of System Safety Engineering Analysis are presented. The philosophy of System Safety and the various analytic methods available to the engineering profession are discussed. A text-book description of each of the methods is included.

Web Analytics

EPA Pesticide Factsheets

EPA’s Web Analytics Program collects, analyzes, and provides reports on traffic, quality assurance, and customer satisfaction metrics for EPA’s website. The program uses a variety of analytics tools, including Google Analytics and CrazyEgg.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hu, T.A.

This is the final sample analysis report for tank 241-BX-104 (BX-104), cores 126 and 127. Two segments from each core yielded a total of 11 samples which were analyzed. The data quality objectives (DQOs) applicable to this sampling event were the Safety Screening DQO (Dukelow et al. 1995) and the Organic Safety DQO (Turner et al. 1995). The samples were received, extruded and analyzed at PNNL 325 Analytical Chemistry Laboratory (ACL). The analyses were performed in accordance with the Sample Analysis Plan (Gretsinger 1996) and indicated that the tank is safe with respect to the criteria in the Safety Screeningmore » and Organic DQO. Detailed analytical results were described in the analytical laboratory 45-day Report (Attachment 1, WHC-SD-WM-DP-171, REV. 0) and final report (Attachment 2, PNL-BX-104 REV.1) prepared by PNNL, 325 Laboratory. Corrections and/or exceptions to the PNNL final report are provided.« less

Analytical methodology for safety validation of computer controlled subsystems. Volume 1 : state-of-the-art and assessment of safety verification/validation methodologies

DOT National Transportation Integrated Search

1995-09-01

This report describes the development of a methodology designed to assure that a sufficiently high level of safety is achieved and maintained in computer-based systems which perform safety critical functions in high-speed rail or magnetic levitation ...

Radioactive Waste Characterization Strategies; Comparisons Between AK/PK, Dose to Curie Modeling, Gamma Spectroscopy, and Laboratory Analysis Methods- 12194

DOE Office of Scientific and Technical Information (OSTI.GOV)

Singledecker, Steven J.; Jones, Scotty W.; Dorries, Alison M.

2012-07-01

In the coming fiscal years of potentially declining budgets, Department of Energy facilities such as the Los Alamos National Laboratory (LANL) will be looking to reduce the cost of radioactive waste characterization, management, and disposal processes. At the core of this cost reduction process will be choosing the most cost effective, efficient, and accurate methods of radioactive waste characterization. Central to every radioactive waste management program is an effective and accurate waste characterization program. Choosing between methods can determine what is classified as low level radioactive waste (LLRW), transuranic waste (TRU), waste that can be disposed of under an Authorizedmore » Release Limit (ARL), industrial waste, and waste that can be disposed of in municipal landfills. The cost benefits of an accurate radioactive waste characterization program cannot be overstated. In addition, inaccurate radioactive waste characterization of radioactive waste can result in the incorrect classification of radioactive waste leading to higher disposal costs, Department of Transportation (DOT) violations, Notice of Violations (NOVs) from Federal and State regulatory agencies, waste rejection from disposal facilities, loss of operational capabilities, and loss of disposal options. Any one of these events could result in the program that mischaracterized the waste losing its ability to perform it primary operational mission. Generators that produce radioactive waste have four characterization strategies at their disposal: - Acceptable Knowledge/Process Knowledge (AK/PK); - Indirect characterization using a software application or other dose to curie methodologies; - Non-Destructive Analysis (NDA) tools such as gamma spectroscopy; - Direct sampling (e.g. grab samples or Surface Contaminated Object smears) and laboratory analytical; Each method has specific advantages and disadvantages. This paper will evaluate each method detailing those advantages and disadvantages including; - Cost benefit analysis (basic materials costs, overall program operations costs, man-hours per sample analyzed, etc.); - Radiation Exposure As Low As Reasonably Achievable (ALARA) program considerations; - Industrial Health and Safety risks; - Overall Analytical Confidence Level. The concepts in this paper apply to any organization with significant radioactive waste characterization and management activities working to within budget constraints and seeking to optimize their waste characterization strategies while reducing analytical costs. (authors)« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buttner, William; Rivkin, Carl; Burgess, Robert

The United Nations Global Technical Regulation (GTR) Number 13 (Global Technical Regulation on Hydrogen and Fuel Cell Vehicles) is the defining document regulating safety requirements in hydrogen vehicles, and in particular fuel cell electric vehicles (FCEV). GTR Number 13 has been formally implemented and will serve as the basis for the national regulatory standards for FCEV safety in North America (Canada, United States), Japan, Korea, and the European Union. The GTR defines safety requirement for these vehicles, including specifications on the allowable hydrogen levels in vehicle enclosures during in-use and post-crash conditions and on the allowable hydrogen emissions levels inmore » vehicle exhaust during certain modes of normal operation. However, in order to be incorporated into national regulations, that is, in order to be binding, methods to verify compliance to the specific requirements must exist. In a collaborative program, the Sensor Laboratories at the National Renewable Energy Laboratory in the United States and the Joint Research Centre, Institute for Energy and Transport in the Netherlands have been evaluating and developing analytical methods that can be used to verify compliance to the hydrogen release requirement as specified in the GTR.« less

Comparative study between single core model and detail core model of CFD modelling on reactor core cooling behaviour

NASA Astrophysics Data System (ADS)

Darmawan, R.

2018-01-01

Nuclear power industry is facing uncertainties since the occurrence of the unfortunate accident at Fukushima Daiichi Nuclear Power Plant. The issue of nuclear power plant safety becomes the major hindrance in the planning of nuclear power program for new build countries. Thus, the understanding of the behaviour of reactor system is very important to ensure the continuous development and improvement on reactor safety. Throughout the development of nuclear reactor technology, investigation and analysis on reactor safety have gone through several phases. In the early days, analytical and experimental methods were employed. For the last four decades 1D system level codes were widely used. The continuous development of nuclear reactor technology has brought about more complex system and processes of nuclear reactor operation. More detailed dimensional simulation codes are needed to assess these new reactors. Recently, 2D and 3D system level codes such as CFD are being explored. This paper discusses a comparative study on two different approaches of CFD modelling on reactor core cooling behaviour.

Studies on the chemical stability and functional group compatibility of the benzoin photolabile safety-catch linker using an analytical construct.

PubMed

Cano, Montserrat; Ladlow, Mark; Balasubramanian, Shankar

2002-01-01

A chemical stability study of the benzoin photolabile safety-catch linker (BPSC) has been carried out using a dual-linker analytical construct to establish its compatibility with a range of commonly employed solid-phase reaction conditions. As a result of this study, the dithiane-protected benzoin linker was shown to be reactive only toward strong acids and fluoride nucleophile. Furthermore, a scan of diverse functional groups thought to be unstable toward the safety-catch removal conditions has also been carried out. These data should provide assistance in future utilization of the BPSC for syntheses.

Biomonitoring at the UK Health and Safety Laboratory.

PubMed

Cocker, J; Jones, K; Morton, J; Mason, H J

2007-05-01

The UK Health and Safety Laboratory (HSL) provides research and analytical support to the Health and Safety Executive, other Government Departments and employers. In the area of biomonitoring HSL conducts research studies and provides an analytical service for regular surveillance of worker exposure to hazardous substances. This paper gives brief examples of how data from such studies can be used to develop biological monitoring guidance values for isocyanates, polycyclic aromatic hydrocarbons and hexavalent chromium. In addition, a study of occupational exposure to copper chrome arsenic wood preservatives is briefly described to show how biological monitoring can be used for post-approval surveillance of a biocide.

Meta-analysis of food safety training on hand hygiene knowledge and attitudes among food handlers.

PubMed

Soon, Jan Mei; Baines, Richard; Seaman, Phillip

2012-04-01

Research has shown that traditional food safety training programs and strategies to promote hand hygiene increases knowledge of the subject. However, very few studies have been conducted to evaluate the impact of food safety training on food handlers' attitudes about good hand hygiene practices. The objective of this meta-analytical study was to assess the extent to which food safety training or intervention strategies increased knowledge of and attitudes about hand hygiene. A systematic review of food safety training articles was conducted. Additional studies were identified from abstracts from food safety conferences and food science education conferences. Search terms included combinations of "food safety," "food hygiene," "training," "education," "hand washing," "hand hygiene," "knowledge," "attitudes," "practices," "behavior," and "food handlers." Only before- and after-training approaches and cohort studies with training (intervention group) and without training (control group) in hand hygiene knowledge and including attitudes in food handlers were evaluated. All pooled analyses were based on a random effects model. Meta-analysis values for nine food safety training and intervention studies on hand hygiene knowledge among food handlers were significantly higher than those of the control (without training), with an effect size (Hedges' g) of 1.284 (95% confidence interval [CI] ∼ 0.830 to 1.738). Meta-analysis of five food safety training and intervention studies in which hand hygiene attitudes and self-reported practices were monitored produced a summary effect size of 0.683 (95% CI ∼ 0.523 to 0.843). Food safety training increased knowledge and improved attitudes about hand hygiene practices. Refresher training and long-term reinforcement of good food handling behaviors may also be beneficial for sustaining good hand washing practices.

Pavement Performance : Approaches Using Predictive Analytics

DOT National Transportation Integrated Search

2018-03-23

Acceptable pavement condition is paramount to road safety. Using predictive analytics techniques, this project attempted to develop models that provide an assessment of pavement condition based on an array of indictors that include pavement distress,...

Safety risk assessment using analytic hierarchy process (AHP) during planning and budgeting of construction projects.

PubMed

Aminbakhsh, Saman; Gunduz, Murat; Sonmez, Rifat

2013-09-01

The inherent and unique risks on construction projects quite often present key challenges to contractors. Health and safety risks are among the most significant risks in construction projects since the construction industry is characterized by a relatively high injury and death rate compared to other industries. In construction project management, safety risk assessment is an important step toward identifying potential hazards and evaluating the risks associated with the hazards. Adequate prioritization of safety risks during risk assessment is crucial for planning, budgeting, and management of safety related risks. In this paper, a safety risk assessment framework is presented based on the theory of cost of safety (COS) model and the analytic hierarchy process (AHP). The main contribution of the proposed framework is that it presents a robust method for prioritization of safety risks in construction projects to create a rational budget and to set realistic goals without compromising safety. The framework provides a decision tool for the decision makers to determine the adequate accident/injury prevention investments while considering the funding limits. The proposed safety risk framework is illustrated using a real-life construction project and the advantages and limitations of the framework are discussed. Copyright © 2013 National Safety Council and Elsevier Ltd. All rights reserved.

A Tale of Two Trails: Exploring Different Paths to Success

PubMed Central

Walker, Jennifer G.; Evenson, Kelly R.; Davis, William J.; Bors, Philip; Rodríguez, Daniel A.

2016-01-01

Background This comparative case study investigates 2 successful community trail initiatives, using the Active Living By Design (ALBD) Community Action Model as an analytical framework. The model includes 5 strategies: preparation, promotion, programs, policy, and physical projects. Methods Key stakeholders at 2 sites participated in in-depth interviews (N = 14). Data were analyzed for content using Atlas Ti and grouped according to the 5 strategies. Results Preparation Securing trail resources was challenging, but shared responsibilities facilitated trail development. Promotions The initiatives demonstrated minimal physical activity encouragement strategies. Programs Community stakeholders did not coordinate programmatic opportunities for routine physical activity. Policy Trails’ inclusion in regional greenway master plans contributed to trail funding and development. Policies that were formally institutionalized and enforced led to more consistent trail construction and safer conditions for users. Physical Projects Consistent standards for way finding signage and design safety features enhanced trail usability and safety. Conclusions Communities with different levels of government support contributed unique lessons to inform best practices of trail initiatives. This study revealed a disparity between trail development and use-encouragement strategies, which may limit trails’ impact on physical activity. The ALBD Community Action Model provided a viable framework to structure cross-disciplinary community trail initiatives. PMID:21597125

The U. S. Department of Energy SARP review training program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mauck, C.J.

1988-01-01

In support of its radioactive material packaging certification program, the U.S. Department of Energy (DOE) has established a special training workshop. The purpose of the two-week workshop is to develop skills in reviewing Safety Analysis Reports for Packagings (SARPs) and performing confirmatory analyses. The workshop, conducted by the Lawrence Livermore National Laboratory (LLNL) for DOE, is divided into two parts: methods of review and methods of analysis. The sessions covering methods of review are based on the DOE document, ''Packaging Review Guide for Reviewing Safety Analysis Reports for Packagings'' (PRG). The sessions cover relevant DOE Orders and all areas ofmore » review in the applicable Nuclear Regulatory Commission (NRC) Regulatory Guides. The technical areas addressed include structural and thermal behavior, materials, shielding, criticality, and containment. The course sessions on methods of analysis provide hands-on experience in the use of calculational methods and codes for reviewing SARPs. Analytical techniques and computer codes are discussed and sample problems are worked. Homework is assigned each night and over the included weekend; at the conclusion, a comprehensive take-home examination is given requiring six to ten hours to complete.« less

Defining a risk-informed framework for whole-of-government lessons learned: A Canadian perspective.

PubMed

Friesen, Shaye K; Kelsey, Shelley; Legere, J A Jim

Lessons learned play an important role in emergency management (EM) and organizational agility. Virtually all aspects of EM can derive benefit from a lessons learned program. From major security events to exercises, exploiting and applying lessons learned and "best practices" is critical to organizational resilience and adaptiveness. A robust lessons learned process and methodology provides an evidence base with which to inform decisions, guide plans, strengthen mitigation strategies, and assist in developing tools for operations. The Canadian Safety and Security Program recently supported a project to define a comprehensive framework that would allow public safety and security partners to regularly share event response best practices, and prioritize recommendations originating from after action reviews. This framework consists of several inter-locking elements: a comprehensive literature review/environmental scan of international programs; a survey to collect data from end users and management; the development of a taxonomy for organizing and structuring information; a risk-informed methodology for selecting, prioritizing, and following through on recommendations; and standardized templates and tools for tracking recommendations and ensuring implementation. This article discusses the efforts of the project team, which provided "best practice" advice and analytical support to ensure that a systematic approach to lessons learned was taken by the federal community to improve prevention, preparedness, and response activities. It posits an approach by which one might design a systematic process for information sharing and event response coordination-an approach that will assist federal departments to institutionalize a cross-government lessons learned program.

MS-Based Analytical Techniques: Advances in Spray-Based Methods and EI-LC-MS Applications

PubMed Central

Medina, Isabel; Cappiello, Achille; Careri, Maria

2018-01-01

Mass spectrometry is the most powerful technique for the detection and identification of organic compounds. It can provide molecular weight information and a wealth of structural details that give a unique fingerprint for each analyte. Due to these characteristics, mass spectrometry-based analytical methods are showing an increasing interest in the scientific community, especially in food safety, environmental, and forensic investigation areas where the simultaneous detection of targeted and nontargeted compounds represents a key factor. In addition, safety risks can be identified at the early stage through online and real-time analytical methodologies. In this context, several efforts have been made to achieve analytical instrumentation able to perform real-time analysis in the native environment of samples and to generate highly informative spectra. This review article provides a survey of some instrumental innovations and their applications with particular attention to spray-based MS methods and food analysis issues. The survey will attempt to cover the state of the art from 2012 up to 2017. PMID:29850370

Analytical methods in multivariate highway safety exposure data estimation

DOT National Transportation Integrated Search

1984-01-01

Three general analytical techniques which may be of use in : extending, enhancing, and combining highway accident exposure data are : discussed. The techniques are log-linear modelling, iterative propor : tional fitting and the expectation maximizati...

Immunoassay

USDA-ARS?s Scientific Manuscript database

Immunoassays are analytical methods that employ antibodies or molecules derived from antibodies for the essential binding reactions. The choice of immunoassay system for food safety analysis depends on the analyte, the matrix, and the requirements of the analysis (speed, throughput, sensitivity, spe...

Highway Safety Program Manual: Volume 13: Traffic Engineering Services.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 13 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) focuses on traffic engineering services. The introduction outlines the purposes and objectives of Highway Safety Program Standard 13 and the Highway Safety Program Manual. Program development and…

Statewide traffic safety study phase I : review of current traffic safety research, practice, analytical procedures and databases.

DOT National Transportation Integrated Search

2005-05-01

This report synthesized the research findings of Phase I of the Statewide Traffic Safety Study of Louisiana, sponsored by the Louisiana Department of Transportation and Development. The objective of Phase I was to provide a comprehensive review of th...

South Carolina Industrial Arts Safety Guide. Student Section.

ERIC Educational Resources Information Center

South Carolina State Dept. of Education, Columbia.

This student section of a South Carolina industrial arts safety guide includes guidelines for developing a student safety program and three sections of shop safety practices. Safety program format, safety committees, safety inspection, and student accident investigation are discussed in the section on developing a student safety program. Set forth…

Vocational Education Safety Instruction Manual.

ERIC Educational Resources Information Center

Cropley, Russell, Ed.; Doherty, Susan Sloan, Ed.

This manual describes four program areas in vocational education safety instruction: (1) introduction to a safety program; (2) resources to ensure laboratory safety; (3) safety program implementation; and (4) safety rules and safety tests. The safety rules and tests included in section four are for the most common tools and machines used in…

Visual Analytics in Public Safety: Example Capabilities for Example Government Agencies

DTIC Science & Technology

2011-10-01

is not limited to: the Police Records Information Management Environment for British Columbia (PRIME-BC), the Police Reporting and Occurrence System...and filtering for rapid identification of relevant documents - Graphical environment for visual evidence marshaling - Interactive linking and...analytical reasoning facilitated by interactive visual interfaces and integration with computational analytics. Indeed, a wide variety of technologies

Bridging the gap: leveraging business intelligence tools in support of patient safety and financial effectiveness.

PubMed

Ferranti, Jeffrey M; Langman, Matthew K; Tanaka, David; McCall, Jonathan; Ahmad, Asif

2010-01-01

Healthcare is increasingly dependent upon information technology (IT), but the accumulation of data has outpaced our capacity to use it to improve operating efficiency, clinical quality, and financial effectiveness. Moreover, hospitals have lagged in adopting thoughtful analytic approaches that would allow operational leaders and providers to capitalize upon existing data stores. In this manuscript, we propose a fundamental re-evaluation of strategic IT investments in healthcare, with the goal of increasing efficiency, reducing costs, and improving outcomes through the targeted application of health analytics. We also present three case studies that illustrate the use of health analytics to leverage pre-existing data resources to support improvements in patient safety and quality of care, to increase the accuracy of billing and collection, and support emerging health issues. We believe that such active investment in health analytics will prove essential to realizing the full promise of investments in electronic clinical systems.

Current Status of Mycotoxin Analysis: A Critical Review.

PubMed

Shephard, Gordon S

2016-07-01

It is over 50 years since the discovery of aflatoxins focused the attention of food safety specialists on fungal toxins in the feed and food supply. Since then, analysis of this important group of natural contaminants has advanced in parallel with general developments in analytical science, and current MS methods are capable of simultaneously analyzing hundreds of compounds, including mycotoxins, pesticides, and drugs. This profusion of data may advance our understanding of human exposure, yet constitutes an interpretive challenge to toxicologists and food safety regulators. Despite these advances in analytical science, the basic problem of the extreme heterogeneity of mycotoxin contamination, although now well understood, cannot be circumvented. The real health challenges posed by mycotoxin exposure occur in the developing world, especially among small-scale and subsistence farmers. Addressing these problems requires innovative approaches in which analytical science must also play a role in providing suitable out-of-laboratory analytical techniques.

Bridging the gap: leveraging business intelligence tools in support of patient safety and financial effectiveness

PubMed Central

Langman, Matthew K; Tanaka, David; McCall, Jonathan; Ahmad, Asif

2010-01-01

Healthcare is increasingly dependent upon information technology (IT), but the accumulation of data has outpaced our capacity to use it to improve operating efficiency, clinical quality, and financial effectiveness. Moreover, hospitals have lagged in adopting thoughtful analytic approaches that would allow operational leaders and providers to capitalize upon existing data stores. In this manuscript, we propose a fundamental re-evaluation of strategic IT investments in healthcare, with the goal of increasing efficiency, reducing costs, and improving outcomes through the targeted application of health analytics. We also present three case studies that illustrate the use of health analytics to leverage pre-existing data resources to support improvements in patient safety and quality of care, to increase the accuracy of billing and collection, and support emerging health issues. We believe that such active investment in health analytics will prove essential to realizing the full promise of investments in electronic clinical systems. PMID:20190055

42 CFR 493.959 - Immunohematology.

Code of Federal Regulations, 2014 CFR

2014-10-01

... challenges per testing event a program must provide for each analyte or test procedure is five. Analyte or... Compatibility testing Antibody identification (d) Evaluation of a laboratory's analyte or test performance. HHS... program must compare the laboratory's response for each analyte with the response that reflects agreement...

42 CFR 493.959 - Immunohematology.

Code of Federal Regulations, 2013 CFR

2013-10-01

... challenges per testing event a program must provide for each analyte or test procedure is five. Analyte or... Compatibility testing Antibody identification (d) Evaluation of a laboratory's analyte or test performance. HHS... program must compare the laboratory's response for each analyte with the response that reflects agreement...

42 CFR 493.959 - Immunohematology.

Code of Federal Regulations, 2012 CFR

2012-10-01

... challenges per testing event a program must provide for each analyte or test procedure is five. Analyte or... Compatibility testing Antibody identification (d) Evaluation of a laboratory's analyte or test performance. HHS... program must compare the laboratory's response for each analyte with the response that reflects agreement...

42 CFR 493.959 - Immunohematology.

Code of Federal Regulations, 2011 CFR

2011-10-01

... challenges per testing event a program must provide for each analyte or test procedure is five. Analyte or... Compatibility testing Antibody identification (d) Evaluation of a laboratory's analyte or test performance. HHS... program must compare the laboratory's response for each analyte with the response that reflects agreement...

A Proposed Set of Metrics to Reduce Patient Safety Risk From Within the Anatomic Pathology Laboratory

PubMed Central

Banks, Peter; Brown, Richard; Laslowski, Alex; Daniels, Yvonne; Branton, Phil; Carpenter, John; Zarbo, Richard; Forsyth, Ramses; Liu, Yan-hui; Kohl, Shane; Diebold, Joachim; Masuda, Shinobu; Plummer, Tim

2017-01-01

Background: Anatomic pathology laboratory workflow consists of 3 major specimen handling processes. Among the workflow are preanalytic, analytic, and postanalytic phases that contain multistep subprocesses with great impact on patient care. A worldwide representation of experts came together to create a system of metrics, as a basis for laboratories worldwide, to help them evaluate and improve specimen handling to reduce patient safety risk. Method: Members of the Initiative for Anatomic Pathology Laboratory Patient Safety (IAPLPS) pooled their extensive expertise to generate a list of metrics highlighting processes with high and low risk for adverse patient outcomes. Results: Our group developed a universal, comprehensive list of 47 metrics for patient specimen handling in the anatomic pathology laboratory. Steps within the specimen workflow sequence are categorized as high or low risk. In general, steps associated with the potential for specimen misidentification correspond to the high-risk grouping and merit greater focus within quality management systems. Primarily workflow measures related to operational efficiency can be considered low risk. Conclusion: Our group intends to advance the widespread use of these metrics in anatomic pathology laboratories to reduce patient safety risk and improve patient care with development of best practices and interlaboratory error reporting programs. PMID:28340232

A Proposed Set of Metrics to Reduce Patient Safety Risk From Within the Anatomic Pathology Laboratory.

PubMed

Banks, Peter; Brown, Richard; Laslowski, Alex; Daniels, Yvonne; Branton, Phil; Carpenter, John; Zarbo, Richard; Forsyth, Ramses; Liu, Yan-Hui; Kohl, Shane; Diebold, Joachim; Masuda, Shinobu; Plummer, Tim; Dennis, Eslie

2017-05-01

Anatomic pathology laboratory workflow consists of 3 major specimen handling processes. Among the workflow are preanalytic, analytic, and postanalytic phases that contain multistep subprocesses with great impact on patient care. A worldwide representation of experts came together to create a system of metrics, as a basis for laboratories worldwide, to help them evaluate and improve specimen handling to reduce patient safety risk. Members of the Initiative for Anatomic Pathology Laboratory Patient Safety (IAPLPS) pooled their extensive expertise to generate a list of metrics highlighting processes with high and low risk for adverse patient outcomes. : Our group developed a universal, comprehensive list of 47 metrics for patient specimen handling in the anatomic pathology laboratory. Steps within the specimen workflow sequence are categorized as high or low risk. In general, steps associated with the potential for specimen misidentification correspond to the high-risk grouping and merit greater focus within quality management systems. Primarily workflow measures related to operational efficiency can be considered low risk. Our group intends to advance the widespread use of these metrics in anatomic pathology laboratories to reduce patient safety risk and improve patient care with development of best practices and interlaboratory error reporting programs. © American Society for Clinical Pathology 2017.

FDA's Approach to Regulating Biosimilars.

PubMed

Lemery, Steven J; Ricci, M Stacey; Keegan, Patricia; McKee, Amy E; Pazdur, Richard

2017-04-15

The Biologics Price Competition and Innovation (BPCI) Act, enacted as part of the Affordable Care Act, created a new licensure pathway for biological products demonstrated to be biosimilar with or interchangeable with an FDA-licensed biological product (the "reference product"). The FDA's approach to the regulation of biosimilars is based on the requirements set forth in the BPCI Act. A biosimilar product is highly similar to the reference product, notwithstanding minor differences in clinically inactive components, and there are no clinically meaningful differences between products in terms of safety, purity, and potency. The foundation of a biosimilar development program is an analytic similarity assessment that directly compares the structural/physiochemical and functional properties of the proposed biosimilar with the reference product. Data from clinical studies, which include an assessment of immunogenicity and pharmacokinetics/pharmacodynamics, are used to assess for clinically meaningful differences and not to independently establish the safety and effectiveness of the biosimilar. Like all products that the FDA regulates, the FDA requires that biosimilar products meet the agency's rigorous standards of safety and efficacy for approval. That means patients and health care professionals are able to rely upon the safety and effectiveness of biosimilar products in the same manner as for the reference product. Clin Cancer Res; 23(8); 1882-5. ©2016 AACR . ©2016 American Association for Cancer Research.

University of California Program for Analytical Cytology five-year report, 1982-1987

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stull, S.; Calkins, M.

1987-01-01

The Program for Analytical Cytology (PAC) was created by the Regents of the University of California on June 17, 1982. The purposes of the Program are to encourage research into theoretical, scientific, and engineering aspects of analytical cytology and into its biological and clinical applications.

Harnessing Scientific Literature Reports for Pharmacovigilance

PubMed Central

Ripple, Anna; Tonning, Joseph; Munoz, Monica; Hasan, Rashedul; Ly, Thomas; Francis, Henry; Bodenreider, Olivier

2017-01-01

Summary Objectives We seek to develop a prototype software analytical tool to augment FDA regulatory reviewers’ capacity to harness scientific literature reports in PubMed/MEDLINE for pharmacovigilance and adverse drug event (ADE) safety signal detection. We also aim to gather feedback through usability testing to assess design, performance, and user satisfaction with the tool. Methods A prototype, open source, web-based, software analytical tool generated statistical disproportionality data mining signal scores and dynamic visual analytics for ADE safety signal detection and management. We leveraged Medical Subject Heading (MeSH) indexing terms assigned to published citations in PubMed/MEDLINE to generate candidate drug-adverse event pairs for quantitative data mining. Six FDA regulatory reviewers participated in usability testing by employing the tool as part of their ongoing real-life pharmacovigilance activities to provide subjective feedback on its practical impact, added value, and fitness for use. Results All usability test participants cited the tool’s ease of learning, ease of use, and generation of quantitative ADE safety signals, some of which corresponded to known established adverse drug reactions. Potential concerns included the comparability of the tool’s automated literature search relative to a manual ‘all fields’ PubMed search, missing drugs and adverse event terms, interpretation of signal scores, and integration with existing computer-based analytical tools. Conclusions Usability testing demonstrated that this novel tool can automate the detection of ADE safety signals from published literature reports. Various mitigation strategies are described to foster improvements in design, productivity, and end user satisfaction. PMID:28326432

A review of inherent safety characteristics of metal alloy sodium-cooled fast reactor fuel against postulated accidents

DOE PAGES

Sofu, Tanju

2015-04-01

The thermal, mechanical, and neutronic performance of the metal alloy fast reactor fuel design complements the safety advantages of the liquid metal cooling and the pool-type primary system. Together, these features provide large safety margins in both normal operating modes and for a wide range of postulated accidents. In particular, they maximize the measures of safety associated with inherent reactor response to unprotected, double-fault accidents, and to minimize risk to the public and plant investment. High thermal conductivity and high gap conductance play the most significant role in safety advantages of the metallic fuel, resulting in a flatter radial temperaturemore » profile within the pin and much lower normal operation and transient temperatures in comparison to oxide fuel. Despite the big difference in melting point, both oxide and metal fuels have a relatively similar margin to melting during postulated accidents. When the metal fuel cladding fails, it typically occurs below the coolant boiling point and the damaged fuel pins remain coolable. Metal fuel is compatible with sodium coolant, eliminating the potential of energetic fuel--coolant reactions and flow blockages. All these, and the low retained heat leading to a longer grace period for operator action, are significant contributing factors to the inherently benign response of metallic fuel to postulated accidents. This paper summarizes the past analytical and experimental results obtained in past sodium-cooled fast reactor safety programs in the United States, and presents an overview of fuel safety performance as observed in laboratory and in-pile tests.« less

A review of inherent safety characteristics of metal alloy sodium-cooled fast reactor fuel against postulated accidents

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sofu, Tanju

2015-04-01

The thermal, mechanical, and neutronic performance of the metal alloy fast reactor fuel design complements the safety advantages of the liquid metal cooling and the pool-type primary system. Together, these features provide large safety margins in both normal operating modes and for a wide range of postulated accidents. In particular, they maximize the measures of safety associated with inherent reactor response to unprotected, double-fault accidents, and to minimize risk to the public and plant investment. High thermal conductivity and high gap conductance play the most significant role in safety advantages of the metallic fuel, resulting in a flatter radial temperaturemore » profile within the pin and much lower normal operation and transient temperatures in comparison to oxide fuel. Despite the big difference in melting point, both oxide and metal fuels have a relatively similar margin to melting during postulated accidents. When the metal fuel cladding fails, it typically occurs below the coolant boiling point and the damaged fuel pins remain cool-able. Metal fuel is compatible with sodium coolant, eliminating the potential of energetic fuel coolant reactions and flow blockages. All these, and the low retained heat leading to a longer grace period for operator action, are significant contributing factors to the inherently benign response of metallic fuel to postulated accidents. This paper summarizes the past analytical and experimental results obtained in past sodium-cooled fast reactor safety programs in the United States, and presents an overview of fuel safety performance as observed in laboratory and in-pile tests.« less

Highway Safety Program Manual: Volume 14: Pedestrian Safety.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 14 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on pedestrian safety. The purpose and objectives of a pedestrian safety program are outlined. Federal authority in the area of pedestrian safety and policies regarding a safety program…

77 FR 16551 - Standards for Private Laboratory Analytical Packages and Introduction to Laboratory Related...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-21

... Food Modernization Safety Act for Private Laboratory Managers AGENCY: Food and Drug Administration, HHS... Food Modernization Safety Act for Private Laboratory Managers.'' The topic to be discussed is the...

29 CFR 1960.80 - Secretary's evaluations of agency occupational safety and health programs.

Code of Federal Regulations, 2013 CFR

2013-07-01

... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs § 1960.80 Secretary's evaluations of agency occupational safety and health... evaluating an agency's occupational safety and health program. To accomplish this, the Secretary shall...

29 CFR 1960.80 - Secretary's evaluations of agency occupational safety and health programs.

Code of Federal Regulations, 2011 CFR

2011-07-01

... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs § 1960.80 Secretary's evaluations of agency occupational safety and health... evaluating an agency's occupational safety and health program. To accomplish this, the Secretary shall...

29 CFR 1960.80 - Secretary's evaluations of agency occupational safety and health programs.

Code of Federal Regulations, 2012 CFR

2012-07-01

... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs § 1960.80 Secretary's evaluations of agency occupational safety and health... evaluating an agency's occupational safety and health program. To accomplish this, the Secretary shall...

29 CFR 1960.80 - Secretary's evaluations of agency occupational safety and health programs.

Code of Federal Regulations, 2014 CFR

2014-07-01

... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs § 1960.80 Secretary's evaluations of agency occupational safety and health... evaluating an agency's occupational safety and health program. To accomplish this, the Secretary shall...

29 CFR 1960.80 - Secretary's evaluations of agency occupational safety and health programs.

Code of Federal Regulations, 2010 CFR

2010-07-01

... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs § 1960.80 Secretary's evaluations of agency occupational safety and health... evaluating an agency's occupational safety and health program. To accomplish this, the Secretary shall...

Analytical Utility of Campylobacter Methodologies

USDA-ARS?s Scientific Manuscript database

The National Advisory Committee on Microbiological Criteria for Foods (NACMCF, or the Committee) was asked to address the analytical utility of Campylobacter methodologies in preparation for an upcoming United States Food Safety and Inspection Service (FSIS) baseline study to enumerate Campylobacter...

Industrial Arts Safety Guide. Thai. Bilingual Education Resource Series.

ERIC Educational Resources Information Center

Seattle School District 1, WA.

Designed for use in bilingual education programs, this industrial arts safety guide presents guidelines for developing a student safety program and three sections of shop safety practices in both English and Thai. Safety program format, safety committees, safety inspection, and student accident investigation are discussed in the section on…

Industrial Arts Safety Guide. Japanese. Bilingual Education Resource Series.

ERIC Educational Resources Information Center

Seattle School District 1, WA.

Designed for use in bilingual education programs, this industrial arts safety guide presents guidelines for developing a student safety program and three sections of shop safety practice in both English and Japanese. Safety program format, safety committees, safety inspection, and student accident investigation are discussed in the section on…

Industrial Arts Safety Guide. Cambodian. Bilingual Education Resource Series.

ERIC Educational Resources Information Center

Seattle School District 1, WA.

Designed for use in bilingual education programs, this industrial arts safety guide includes guidelines for developing a student safety program and three sections of shop safety practices in both English and Cambodian. Safety program format, safety committees, safety inspection, and student accident investigation are discussed in the section on…

Industrial Arts Safety Guide. Korean. Bilingual Education Resource Series.

ERIC Educational Resources Information Center

Seattle School District 1, WA.

Designed for use in bilingual education programs, this industrial arts safety guide presents guidelines for developing a student safety program and three sections of shop safety practices in both English and Korean. Safety program format, safety committees, safety inspection, and student accident investigation are discussed in the section on…

Industrial Arts Safety Guide. Ilokano. Bilingual Education Resource Series.

ERIC Educational Resources Information Center

Seattle School District 1, WA.

Designed for use in bilingual education programs, this industrial arts safety guide presents guidelines for developing a student safety program and three sections of shop safety practices in both English and Ilokano. Safety program format, safety committees, safety inspection, and student accident investigation are discussed in the section on…

Industrial Arts Safety Guide. Chinese. Bilingual Education Resource Series.

ERIC Educational Resources Information Center

Seattle School District 1, WA.

Designed for use in bilingual education programs, this industrial arts safety guide presents guidelines for developing a student safety program and three sections of shop safety practices in both English and Chinese. Safety program format, safety committees, safety inspection, and student accident investigation are discussed in the section on…

Systems Engineering Approach to Technology Integration for NASA's 2nd Generation Reusable Launch Vehicle

NASA Technical Reports Server (NTRS)

Thomas, Dale; Smith, Charles; Thomas, Leann; Kittredge, Sheryl

2002-01-01

The overall goal of the 2nd Generation RLV Program is to substantially reduce technical and business risks associated with developing a new class of reusable launch vehicles. NASA's specific goals are to improve the safety of a 2nd-generation system by 2 orders of magnitude - equivalent to a crew risk of 1-in-10,000 missions - and decrease the cost tenfold, to approximately $1,000 per pound of payload launched. Architecture definition is being conducted in parallel with the maturating of key technologies specifically identified to improve safety and reliability, while reducing operational costs. An architecture broadly includes an Earth-to-orbit reusable launch vehicle, on-orbit transfer vehicles and upper stages, mission planning, ground and flight operations, and support infrastructure, both on the ground and in orbit. The systems engineering approach ensures that the technologies developed - such as lightweight structures, long-life rocket engines, reliable crew escape, and robust thermal protection systems - will synergistically integrate into the optimum vehicle. To best direct technology development decisions, analytical models are employed to accurately predict the benefits of each technology toward potential space transportation architectures as well as the risks associated with each technology. Rigorous systems analysis provides the foundation for assessing progress toward safety and cost goals. The systems engineering review process factors in comprehensive budget estimates, detailed project schedules, and business and performance plans, against the goals of safety, reliability, and cost, in addition to overall technical feasibility. This approach forms the basis for investment decisions in the 2nd Generation RLV Program's risk-reduction activities. Through this process, NASA will continually refine its specialized needs and identify where Defense and commercial requirements overlap those of civil missions.

Systems Engineering Approach to Technology Integration for NASA's 2nd Generation Reusable Launch Vehicle

NASA Technical Reports Server (NTRS)

Thomas, Dale; Smith, Charles; Thomas, Leann; Kittredge, Sheryl

2002-01-01

The overall goal of the 2nd Generation RLV Program is to substantially reduce technical and business risks associated with developing a new class of reusable launch vehicles. NASA's specific goals are to improve the safety of a 2nd generation system by 2 orders of magnitude - equivalent to a crew risk of 1-in-10,000 missions - and decrease the cost tenfold, to approximately $1,000 per pound of payload launched. Architecture definition is being conducted in parallel with the maturating of key technologies specifically identified to improve safety and reliability, while reducing operational costs. An architecture broadly includes an Earth-to-orbit reusable launch vehicle, on-orbit transfer vehicles and upper stages, mission planning, ground and flight operations, and support infrastructure, both on the ground and in orbit. The systems engineering approach ensures that the technologies developed - such as lightweight structures, long-life rocket engines, reliable crew escape, and robust thermal protection systems - will synergistically integrate into the optimum vehicle. To best direct technology development decisions, analytical models are employed to accurately predict the benefits of each technology toward potential space transportation architectures as well as the risks associated with each technology. Rigorous systems analysis provides the foundation for assessing progress toward safety and cost goals. The systems engineering review process factors in comprehensive budget estimates, detailed project schedules, and business and performance plans, against the goals of safety, reliability, and cost, in addition to overall technical feasibility. This approach forms the basis for investment decisions in the 2nd Generation RLV Program's risk-reduction activities. Through this process, NASA will continually refine its specialized needs and identify where Defense and commercial requirements overlap those of civil missions.

49 CFR Appendix B to Part 236 - Risk Assessment Criteria

Code of Federal Regulations, 2010 CFR

2010-10-01

... results of the application of safety design principles as noted in Appendix C to this part. The MTTHE is... fault/failure analysis must be based on the assessment of the design and implementation of all safety... associated device drivers, as well as historical performance data, analytical methods and experimental safety...

49 CFR Appendix B to Part 236 - Risk Assessment Criteria

Code of Federal Regulations, 2013 CFR

2013-10-01

... results of the application of safety design principles as noted in Appendix C to this part. The MTTHE is... fault/failure analysis must be based on the assessment of the design and implementation of all safety... associated device drivers, as well as historical performance data, analytical methods and experimental safety...

System and Method for Providing a Climate Data Analytic Services Application Programming Interface Distribution Package

NASA Technical Reports Server (NTRS)

Tamkin, Glenn S. (Inventor); Duffy, Daniel Q. (Inventor); Schnase, John L. (Inventor)

2016-01-01

A system, method and computer-readable storage devices for providing a climate data analytic services application programming interface distribution package. The example system can provide various components. The system provides a climate data analytic services application programming interface library that enables software applications running on a client device to invoke the capabilities of a climate data analytic service. The system provides a command-line interface that provides a means of interacting with a climate data analytic service by issuing commands directly to the system's server interface. The system provides sample programs that call on the capabilities of the application programming interface library and can be used as templates for the construction of new client applications. The system can also provide test utilities, build utilities, service integration utilities, and documentation.

Big data analytics to improve cardiovascular care: promise and challenges.

PubMed

Rumsfeld, John S; Joynt, Karen E; Maddox, Thomas M

2016-06-01

The potential for big data analytics to improve cardiovascular quality of care and patient outcomes is tremendous. However, the application of big data in health care is at a nascent stage, and the evidence to date demonstrating that big data analytics will improve care and outcomes is scant. This Review provides an overview of the data sources and methods that comprise big data analytics, and describes eight areas of application of big data analytics to improve cardiovascular care, including predictive modelling for risk and resource use, population management, drug and medical device safety surveillance, disease and treatment heterogeneity, precision medicine and clinical decision support, quality of care and performance measurement, and public health and research applications. We also delineate the important challenges for big data applications in cardiovascular care, including the need for evidence of effectiveness and safety, the methodological issues such as data quality and validation, and the critical importance of clinical integration and proof of clinical utility. If big data analytics are shown to improve quality of care and patient outcomes, and can be successfully implemented in cardiovascular practice, big data will fulfil its potential as an important component of a learning health-care system.

Synthesis of Feedback Controller for Chaotic Systems by Means of Evolutionary Techniques

NASA Astrophysics Data System (ADS)

Senkerik, Roman; Oplatkova, Zuzana; Zelinka, Ivan; Davendra, Donald; Jasek, Roman

2011-06-01

This research deals with a synthesis of control law for three selected discrete chaotic systems by means of analytic programming. The novality of the approach is that a tool for symbolic regression—analytic programming—is used for such kind of difficult problem. The paper consists of the descriptions of analytic programming as well as chaotic systems and used cost function. For experimentation, Self-Organizing Migrating Algorithm (SOMA) with analytic programming was used.

75 FR 20038 - Railroad Safety Technology Grant Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-16

...] Railroad Safety Technology Grant Program AGENCY: Federal Railroad Administration, Department of Transportation. ACTION: Notice of Funds Availability, Railroad Safety Technology Program-Correction of Grant... Railroad Safety Technology Program, in the section, ``Requirements and Conditions for Grant Applications...

Multiple animal studies for medical chemical defense program in soldier/patient decontamination and drug development on task 85-17: Validation of an analytical method for the detection of soman (GD), mustard (HD), tabun (GA), and VX in wastewater samples. Final report, 13 October 1985-1 January 1989

DOE Office of Scientific and Technical Information (OSTI.GOV)

Joiner, R.L.; Hayes, L.; Rust, W.

1989-05-01

The following report summarizes the development and validation of an analytical method for the analyses of soman (GD), mustard (HD), VX, and tabun (GA) in wastewater. The need for an analytical method that can detect GD, HD, VX, and GA with the necessary sensitivity (< 20 parts per billion (PPB))and selectivity is essential to Medical Research and Evaluation Facility (MREF) operations. The analytical data were generated using liquid-liquid extraction of the wastewater, with the extract being concentrated and analyzed by gas chromatography (GC) methods. The sample preparation and analyses methods were developed in support of ongoing activities within the MREF.more » We have documented the precision and accuracy of the analytical method through an expected working calibration range (3.0 to 60 ppb). The analytical method was statistically evaluated over a range of concentrations to establish a detection limit and quantitation limit for the method. Whenever the true concentration is 8.5 ppb or above, the probability is at least 99.9 percent that the measured concentration will be ppb or above. Thus, 6 ppb could be used as a lower reliability limit for detecting concentrations in excess of 8.5 ppb. In summary, the proposed sample extraction and analyses methods are suitable for quantitative analyses to determine the presence of GD, HD, VX, and GA in wastewater samples. Our findings indicate that we can detect any of these chemical surety materiel (CSM) in water at or below the established U.S. Army Surgeon General's safety levels in drinking water.« less

Highway Safety Program Manual: Volume 3: Motorcycle Safety.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 3 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on aspects of motorcycle safety. The purpose and specific objectives of a State motorcycle safety program are outlined. Federal authority in the highway safety area and general policies…

Laboratory evaluation of alcohol safety interlock systems. Volume 1 : summary report

DOT National Transportation Integrated Search

1974-01-01

The report contains the results of an experimental and analytical evaluation of instruments and techniques designed to prevent an intoxicated driver from operating his automobile. The prototype 'Alcohol Safety Interlock Systems' tested were developed...

Computational toxicity in 21st century safety sciences (China talk - Fuzhou China)

EPA Science Inventory

presentation at the Joint Meeting of Analytical Toxicology and Computational Toxicology Committee (Chinese Society of Toxicology) International Workshop on Advanced Chemical Safety Assessment Technologies on 11 May 2016, Fuzhou University, Fuzhou China

Aptamer-Based Analysis: A Promising Alternative for Food Safety Control

PubMed Central

Amaya-González, Sonia; de-los-Santos-Álvarez, Noemí; Miranda-Ordieres, Arturo J.; Lobo-Castañón, Maria Jesús

2013-01-01

Ensuring food safety is nowadays a top priority of authorities and professional players in the food supply chain. One of the key challenges to determine the safety of food and guarantee a high level of consumer protection is the availability of fast, sensitive and reliable analytical methods to identify specific hazards associated to food before they become a health problem. The limitations of existing methods have encouraged the development of new technologies, among them biosensors. Success in biosensor design depends largely on the development of novel receptors with enhanced affinity to the target, while being stable and economical. Aptamers fulfill these characteristics, and thus have surfaced as promising alternatives to natural receptors. This Review describes analytical strategies developed so far using aptamers for the control of pathogens, allergens, adulterants, toxins and other forbidden contaminants to ensure food safety. The main progresses to date are presented, highlighting potential prospects for the future. PMID:24287543

Analytic Studies of the Relationship between Track Geometry Variations and Derailment Potential at Low Speeds

DOT National Transportation Integrated Search

1983-09-01

This report describes analytical studies carried out to define the relationship between track parameters and safety from derailment. Problematic track scenarios are identified reflecting known accident data. Vehicle response is investigated in the 10...

Diagnosis, referral, and rehabilitation within the Fairfax Alcohol Safety Action Project, 1974.

DOT National Transportation Integrated Search

1975-01-01

This report is a combination of Analytic Study #5 (Diagnosis and Referral) and Analytic Study #6 (Rehabilitation). Data concerning these countermeasures are presented together because of their very close relationship within the Fairfax ASAP. Both the...

Analytical Studies of the Relationship Between Track Geometry Variations and Derailment Potential at Low Speeds

DOT National Transportation Integrated Search

1983-09-01

This report describes analytical studies carried out to define the relationship between track parameters and safety from derailment. Problematic track scenarios are identified reflecting known accident data. Vehicle response is investigated in the 10...

Safety in Outdoor Adventure Programs. S.O.A.P. Safety Policy.

ERIC Educational Resources Information Center

MacDonald, Wayne, Comp.; And Others

Drafted in 1978 as a working document for Safety in Outdoor Adventure Programs (S.O.A.P.) by a council of outdoor adventure programmers, checklists outline standard accepted safety policy for Outdoor Adventure Programs and Wilderness Adventure Programs conducted through public or private agencies in California. Safety policy emphasizes: the…

78 FR 43091 - Technical Operations Safety Action Program (T-SAP) and Air Traffic Safety Action Program (ATSAP)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-19

... Administration 14 CFR Part 193 [Docket No.: FAA-2013-0375] Technical Operations Safety Action Program (T-SAP) and Air Traffic Safety Action Program (ATSAP) AGENCY: Federal Aviation Administration (FAA), Department of Transportation (DOT). ACTION: Notice of Proposed Order Designating Safety Information as Protected from...

$ANBA; a rapid, combined data acquisition and correction program for the SEMQ electron microprobe

USGS Publications Warehouse

McGee, James J.

1983-01-01

$ANBA is a program developed for rapid data acquisition and correction on an automated SEMQ electron microprobe. The program provides increased analytical speed and reduced disk read/write operations compared with the manufacturer's software, resulting in a doubling of analytical throughput. In addition, the program provides enhanced analytical features such as averaging, rapid and compact data storage, and on-line plotting. The program is described with design philosophy, flow charts, variable names, a complete program listing, and system requirements. A complete operating example and notes to assist in running the program are included.

FMCSA safety program effectiveness measurement : Roadside Intervention Effectiveness Model, fiscal year 2010 : [analysis brief].

DOT National Transportation Integrated Search

2014-11-01

Two of the Federal Motor Carrier Safety Administrations (FMCSAs) key safety programs are the Roadside Inspection and Traffic Enforcement programs. The Roadside Inspection program consists of roadside inspections performed by qualified safety in...

A Big Data Analytics Methodology Program in the Health Sector

ERIC Educational Resources Information Center

Lawler, James; Joseph, Anthony; Howell-Barber, H.

2016-01-01

The benefits of Big Data Analytics are cited frequently in the literature. However, the difficulties of implementing Big Data Analytics can limit the number of organizational projects. In this study, the authors evaluate business, procedural and technical factors in the implementation of Big Data Analytics, applying a methodology program. Focusing…

Using Maps in Web Analytics to Evaluate the Impact of Web-Based Extension Programs

ERIC Educational Resources Information Center

Veregin, Howard

2015-01-01

Maps can be a valuable addition to the Web analytics toolbox for Extension programs that use the Web to disseminate information. Extension professionals use Web analytics tools to evaluate program impacts. Maps add a unique perspective through visualization and analysis of geographic patterns and their relationships to other variables. Maps can…

Statistical Approaches to Assess Biosimilarity from Analytical Data.

PubMed

Burdick, Richard; Coffey, Todd; Gutka, Hiten; Gratzl, Gyöngyi; Conlon, Hugh D; Huang, Chi-Ting; Boyne, Michael; Kuehne, Henriette

2017-01-01

Protein therapeutics have unique critical quality attributes (CQAs) that define their purity, potency, and safety. The analytical methods used to assess CQAs must be able to distinguish clinically meaningful differences in comparator products, and the most important CQAs should be evaluated with the most statistical rigor. High-risk CQA measurements assess the most important attributes that directly impact the clinical mechanism of action or have known implications for safety, while the moderate- to low-risk characteristics may have a lower direct impact and thereby may have a broader range to establish similarity. Statistical equivalence testing is applied for high-risk CQA measurements to establish the degree of similarity (e.g., highly similar fingerprint, highly similar, or similar) of selected attributes. Notably, some high-risk CQAs (e.g., primary sequence or disulfide bonding) are qualitative (e.g., the same as the originator or not the same) and therefore not amenable to equivalence testing. For biosimilars, an important step is the acquisition of a sufficient number of unique originator drug product lots to measure the variability in the originator drug manufacturing process and provide sufficient statistical power for the analytical data comparisons. Together, these analytical evaluations, along with PK/PD and safety data (immunogenicity), provide the data necessary to determine if the totality of the evidence warrants a designation of biosimilarity and subsequent licensure for marketing in the USA. In this paper, a case study approach is used to provide examples of analytical similarity exercises and the appropriateness of statistical approaches for the example data.

Canadian Pacific Railway mechanical services' 5-Alive safety program shows promise in reducing injuries.

DOT National Transportation Integrated Search

2006-09-01

The Federal Railroad Administration (FRA) Human Factors Research and Development (R&D) Program is sponsoring an Alternative Safety Measures Program to explore alternative methods for evaluating whether safety programs improve safety outcomes and the ...

Hydrogen monitoring requirements in the global technical regulation on hydrogen and fuel cell vehicles

DOE PAGES

Buttner, William; Rivkin, C.; Burgess, R.; ...

2017-02-04

Here, the United Nations Economic Commission for Europe Global Technical Regulation (GTR) Number 13 ( Global Technical Regulation on Hydrogen and Fuel Cell Vehicles) is the defining document regulating safety requirements in hydrogen vehicles, and in particular, fuel cell electric vehicles (FCEVs). GTR Number 13 has been formally adopted and will serve as the basis for the national regulatory standards for FCEV safety in North America (led by the United States), Japan, Korea, and the European Union. The GTR defines safety requirements for these vehicles, including specifications on the allowable hydrogen levels in vehicle enclosures during in-use and post-crash conditionsmore » and on the allowable hydrogen emissions levels in vehicle exhaust during certain modes of normal operation. However, in order to be incorporated into national regulations, that is, to be legally binding, methods to verify compliance with the specific requirements must exist. In a collaborative program, the Sensor Laboratories at the National Renewable Energy Laboratory in the United States and the Joint Research Centre, Institute for Energy and Transport in the Netherlands have been evaluating and developing analytical methods that can be used to verify compliance with the hydrogen release requirements as specified in the GTR.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buttner, William; Rivkin, C.; Burgess, R.

Here, the United Nations Economic Commission for Europe Global Technical Regulation (GTR) Number 13 ( Global Technical Regulation on Hydrogen and Fuel Cell Vehicles) is the defining document regulating safety requirements in hydrogen vehicles, and in particular, fuel cell electric vehicles (FCEVs). GTR Number 13 has been formally adopted and will serve as the basis for the national regulatory standards for FCEV safety in North America (led by the United States), Japan, Korea, and the European Union. The GTR defines safety requirements for these vehicles, including specifications on the allowable hydrogen levels in vehicle enclosures during in-use and post-crash conditionsmore » and on the allowable hydrogen emissions levels in vehicle exhaust during certain modes of normal operation. However, in order to be incorporated into national regulations, that is, to be legally binding, methods to verify compliance with the specific requirements must exist. In a collaborative program, the Sensor Laboratories at the National Renewable Energy Laboratory in the United States and the Joint Research Centre, Institute for Energy and Transport in the Netherlands have been evaluating and developing analytical methods that can be used to verify compliance with the hydrogen release requirements as specified in the GTR.« less

Integrated Response Time Evaluation Methodology for the Nuclear Safety Instrumentation System

NASA Astrophysics Data System (ADS)

Lee, Chang Jae; Yun, Jae Hee

2017-06-01

Safety analysis for a nuclear power plant establishes not only an analytical limit (AL) in terms of a measured or calculated variable but also an analytical response time (ART) required to complete protective action after the AL is reached. If the two constraints are met, the safety limit selected to maintain the integrity of physical barriers used for preventing uncontrolled radioactivity release will not be exceeded during anticipated operational occurrences and postulated accidents. Setpoint determination methodologies have actively been developed to ensure that the protective action is initiated before the process conditions reach the AL. However, regarding the ART for a nuclear safety instrumentation system, an integrated evaluation methodology considering the whole design process has not been systematically studied. In order to assure the safety of nuclear power plants, this paper proposes a systematic and integrated response time evaluation methodology that covers safety analyses, system designs, response time analyses, and response time tests. This methodology is applied to safety instrumentation systems for the advanced power reactor 1400 and the optimized power reactor 1000 nuclear power plants in South Korea. The quantitative evaluation results are provided herein. The evaluation results using the proposed methodology demonstrate that the nuclear safety instrumentation systems fully satisfy corresponding requirements of the ART.

An Overview of the Launch Vehicle Blast Environments Development Efforts

NASA Technical Reports Server (NTRS)

Richardson, Erin; Bangham, Mike; Blackwood, James; Skinner, Troy; Hays, Michael; Jackson, Austin; Richman, Ben

2014-01-01

NASA has been funding an ongoing development program to characterize the explosive environments produced during a catastrophic launch vehicle accident. These studies and small-scale tests are focused on the near field environments that threaten the crew. The results indicate that these environments are unlikely to result in immediate destruction of the crew modules. The effort began as an independent assessment by NASA safety organizations, followed by the Ares program and NASA Engineering and Safety Center and now as a Space Launch Systems (SLS) focused effort. The development effort is using the test and accident data available from public or NASA sources as well as focused scaled tests that are examining the fundamental aspects of uncontained explosions of Hydrogen and air and Hydrogen and Oxygen. The primary risk to the crew appears to be the high-energy fragments and these are being characterized for the SLS. The development efforts will characterize the thermal environment of the explosions as well to ensure that the risk is well understood and to document the overall energy balance of an explosion. The effort is multi-path in that analytical, computational and focused testing is being used to develop the knowledge to understand potential SLS explosions. This is an ongoing program with plans that expand the development from fundamental testing at small-scale levels to large-scale tests that can be used to validate models for commercial programs. The ultimate goal is to develop a knowledge base that can be used by vehicle designers to maximize crew survival in an explosion.

Laboratory evaluation of alcohol safety interlock systems. Volume 2 : instrument screening experiments

DOT National Transportation Integrated Search

1974-01-01

The report contains the results of an experimental and analytical evaluation of instruments and techniques designed to prevent an intoxicated driver from operating his automobile. The prototype 'Alcohol Safety Interlock Systems' tested were developed...

Development and Calibration of Highway Safety Manual Equations for Florida Conditions

DOT National Transportation Integrated Search

2011-08-31

The Highway Safety Manual (HSM) provides statistically-valid analytical tools and techniques for quantifying the potential effects on crashes as a result of decisions made in planning, design, operations, and maintenance. Implementation of the new te...

Development and calibration of highway safety manual equations for Florida conditions.

DOT National Transportation Integrated Search

2011-08-31

The Highway Safety Manual (HSM) provides statistically-valid analytical tools and techniques for : quantifying the potential effects on crashes as a result of decisions made in planning, design, : operations, and maintenance. Implementation of the ne...

10 CFR 851.11 - Development and approval of worker safety and health program.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false Development and approval of worker safety and health program. 851.11 Section 851.11 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Program Requirements § 851.11 Development and approval of worker safety and health program. (a) Preparation and...

9 CFR 439.1 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE REGULATORY... four food chemistry analytes (protein, moisture, fat, and salt); or a determination by FSIS that a.... For purposes of computing the comparison mean, a laboratory's “result” for a food chemistry analyte is...

9 CFR 439.1 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE REGULATORY... four food chemistry analytes (protein, moisture, fat, and salt); or a determination by FSIS that a.... For purposes of computing the comparison mean, a laboratory's “result” for a food chemistry analyte is...

9 CFR 439.1 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE REGULATORY... four food chemistry analytes (protein, moisture, fat, and salt); or a determination by FSIS that a.... For purposes of computing the comparison mean, a laboratory's “result” for a food chemistry analyte is...

9 CFR 439.1 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE REGULATORY... four food chemistry analytes (protein, moisture, fat, and salt); or a determination by FSIS that a.... For purposes of computing the comparison mean, a laboratory's “result” for a food chemistry analyte is...

A Silent Safety Program

NASA Technical Reports Server (NTRS)

Goodin, James Ronald

2006-01-01

NASA's Columbia Accident Investigation Board (CAIB) referred 8 times to the NASA "Silent Safety Program." This term, "Silent Safety Program" was not an original observation but first appeared in the Rogers Commission's Investigation of the Challenger Mishap. The CAIB on page 183 of its report in the paragraph titled 'Encouraging Minority Opinion,' stated "The Naval Reactor Program encourages minority opinions and "bad news." Leaders continually emphasize that when no minority opinions are present, the responsibility for a thorough and critical examination falls to management. . . Board interviews revealed that it is difficult for minority and dissenting opinions to percolate up through the agency's hierarchy. . ." The first question and perhaps the only question is - what is a silent safety program? Well, a silent safety program may be the same as the dog that didn't bark in Sherlock Holmes' "Adventure of the Silver Blaze" because system safety should behave as a devil's advocate for the program barking on every occasion to insure a critical review inclusion. This paper evaluates the NASA safety program and provides suggestions to prevent the recurrence of the silent safety program alluded to in the Challenger Mishap Investigation. Specifically targeted in the CAM report, "The checks and balances the safety system was meant to provide were not working." A silent system safety program is not unique to NASA but could emerge in any and every organization. Principles developed by Irving Janis in his book, Groupthink, listed criteria used to evaluate an organization's cultural attributes that allows a silent safety program to evolve. If evidence validates Jams's criteria, then Jams's recommendations for preventing groupthink can also be used to improve a critical evaluation and thus prevent the development of a silent safety program.

Business Analytics in Practice and in Education: A Competency-Based Perspective

ERIC Educational Resources Information Center

Mamonov, Stanislav; Misra, Ram; Jain, Rashmi

2015-01-01

Business analytics is a fast-growing area in practice. The rapid growth of business analytics in practice in the recent years is mirrored by a corresponding fast evolution of new educational programs. While more than 130 graduate and undergraduate degree programs in business analytics have been launched in the past 5 years, no commonly accepted…

Installation-restoration program, Phase 2. Confirmation/quantification Stage 1 for Otis Air National Guard Base, Massachusetts, Air National Guard Support Center, Andrews Air Force Base, Maryland. Volume 2. Appendices. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1985-10-01

The purpose of this task is to determine if environmental contamination has resulted from waste disposal practices at Otis ANGB MA; to provide estimates of the magnitude and extent of contamination, should contamination be found; to identify potential environmental consequences of migrating pollutants; to identify any additional investigations and their attendant costs necessary to identify the magnitude, extent and direction of movement of discovered contaminants. Partial contents include: well and test pit logs; site safety plan; laboratory analytical methods and quality assurance; and Federal and state drinking water and human health standards applicable in Massachusetts.

Influence of tectonic disturbances on the parameters of excavation support with rock anchor

NASA Astrophysics Data System (ADS)

Dyomin, V. F.; Yavorsky, V. V.; Demina, T. V.; Baidikova, N. V.; Protsenko, A. V.

2017-10-01

The mechanism of deformation, movement and rockfalls in structurally disturbed nonuniform rock mass using analytical modeling operation for assessment of the strain-stress state (SSS) of the rock mass around mining has been investigated. The SSS research of the rock masses by means of the ANSYS program of the excavation in the “Saransk” mine of coal mining JSC “ArselorMittal Temirtau” in the Karaganda coal basin has been conducted. The parameters of the exploitation of the anchor support on the mines for fixing the rock bolts in the workings to ensure the safety of mining operations in the areas of geological disturbances have been determined.

Portable Diagnostics Technology Assessment for Space Missions. Part 2; Market Survey

NASA Technical Reports Server (NTRS)

Nelson, Emily S.; Chait, Arnon

2010-01-01

A mission to Mars of several years duration requires more demanding standards for all onboard instruments than a 6-month mission to the Moon or the International Space Station. In Part 1, we evaluated generic technologies and suitability to NASA needs. This prior work considered crew safety, device maturity and flightworthiness, resource consumption, and medical value. In Part 2, we continue the study by assessing the current marketplace for reliable Point-of-Care diagnostics. The ultimate goal of this project is to provide a set of objective analytical tools to suggest efficient strategies for reaching specific medical targets for any given space mission as program needs, technological development, and scientific understanding evolve.

77 FR 70409 - System Safety Program

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-26

...-0060, Notice No. 2] 2130-AC31 System Safety Program AGENCY: Federal Railroad Administration (FRA... passenger railroads to develop and implement a system safety program (SSP) to improve the safety of their... Division, U.S. Department of Transportation, Federal Railroad Administration, Office of Railroad Safety...

IBM Watson Analytics: Automating Visualization, Descriptive, and Predictive Statistics

PubMed Central

2016-01-01

Background We live in an era of explosive data generation that will continue to grow and involve all industries. One of the results of this explosion is the need for newer and more efficient data analytics procedures. Traditionally, data analytics required a substantial background in statistics and computer science. In 2015, International Business Machines Corporation (IBM) released the IBM Watson Analytics (IBMWA) software that delivered advanced statistical procedures based on the Statistical Package for the Social Sciences (SPSS). The latest entry of Watson Analytics into the field of analytical software products provides users with enhanced functions that are not available in many existing programs. For example, Watson Analytics automatically analyzes datasets, examines data quality, and determines the optimal statistical approach. Users can request exploratory, predictive, and visual analytics. Using natural language processing (NLP), users are able to submit additional questions for analyses in a quick response format. This analytical package is available free to academic institutions (faculty and students) that plan to use the tools for noncommercial purposes. Objective To report the features of IBMWA and discuss how this software subjectively and objectively compares to other data mining programs. Methods The salient features of the IBMWA program were examined and compared with other common analytical platforms, using validated health datasets. Results Using a validated dataset, IBMWA delivered similar predictions compared with several commercial and open source data mining software applications. The visual analytics generated by IBMWA were similar to results from programs such as Microsoft Excel and Tableau Software. In addition, assistance with data preprocessing and data exploration was an inherent component of the IBMWA application. Sensitivity and specificity were not included in the IBMWA predictive analytics results, nor were odds ratios, confidence intervals, or a confusion matrix. Conclusions IBMWA is a new alternative for data analytics software that automates descriptive, predictive, and visual analytics. This program is very user-friendly but requires data preprocessing, statistical conceptual understanding, and domain expertise. PMID:27729304

IBM Watson Analytics: Automating Visualization, Descriptive, and Predictive Statistics.

PubMed

Hoyt, Robert Eugene; Snider, Dallas; Thompson, Carla; Mantravadi, Sarita

2016-10-11

We live in an era of explosive data generation that will continue to grow and involve all industries. One of the results of this explosion is the need for newer and more efficient data analytics procedures. Traditionally, data analytics required a substantial background in statistics and computer science. In 2015, International Business Machines Corporation (IBM) released the IBM Watson Analytics (IBMWA) software that delivered advanced statistical procedures based on the Statistical Package for the Social Sciences (SPSS). The latest entry of Watson Analytics into the field of analytical software products provides users with enhanced functions that are not available in many existing programs. For example, Watson Analytics automatically analyzes datasets, examines data quality, and determines the optimal statistical approach. Users can request exploratory, predictive, and visual analytics. Using natural language processing (NLP), users are able to submit additional questions for analyses in a quick response format. This analytical package is available free to academic institutions (faculty and students) that plan to use the tools for noncommercial purposes. To report the features of IBMWA and discuss how this software subjectively and objectively compares to other data mining programs. The salient features of the IBMWA program were examined and compared with other common analytical platforms, using validated health datasets. Using a validated dataset, IBMWA delivered similar predictions compared with several commercial and open source data mining software applications. The visual analytics generated by IBMWA were similar to results from programs such as Microsoft Excel and Tableau Software. In addition, assistance with data preprocessing and data exploration was an inherent component of the IBMWA application. Sensitivity and specificity were not included in the IBMWA predictive analytics results, nor were odds ratios, confidence intervals, or a confusion matrix. IBMWA is a new alternative for data analytics software that automates descriptive, predictive, and visual analytics. This program is very user-friendly but requires data preprocessing, statistical conceptual understanding, and domain expertise.

Oak Ridge National Laboratory Health and Safety Long-Range Plan: Fiscal years 1989--1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1989-06-01

The health and safety of its personnel is the first concern of ORNL and its management. The ORNL Health and Safety Program has the responsibility for ensuring the health and safety of all individuals assigned to ORNL activities. This document outlines the principal aspects of the ORNL Health and Safety Long-Range Plan and provides a framework for management use in the future development of the health and safety program. Each section of this document is dedicated to one of the health and safety functions (i.e., health physics, industrial hygiene, occupational medicine, industrial safety, nuclear criticality safety, nuclear facility safety, transportationmore » safety, fire protection, and emergency preparedness). Each section includes functional mission and objectives, program requirements and status, a summary of program needs, and program data and funding summary. Highlights of FY 1988 are included.« less

Evaluating the effectiveness of the Safety Investment Program (SIP) policies for Oregon.

DOT National Transportation Integrated Search

2009-10-01

The Safety Investment Program (SIP) was originally called the Statewide Transportation Improvement Program - : Safety Investment Program (STIP-SIP). The concept of the program was first discussed in October 1997 and the : program was adopted by the O...

23 CFR Appendix C to Part 1200 - ASSURANCES FOR TEEN TRAFFIC SAFETY PROGRAM

Code of Federal Regulations, 2013 CFR

2013-04-01

... 23 Highways 1 2013-04-01 2013-04-01 false ASSURANCES FOR TEEN TRAFFIC SAFETY PROGRAM C APPENDIX C... STATE HIGHWAY SAFETY GRANT PROGRAMS Pt. 1200, App. C APPENDIX C TO PART 1200—ASSURANCES FOR TEEN TRAFFIC SAFETY PROGRAM State: Fiscal Year: The State has elected to implement a Teen Traffic Safety Program—a...

23 CFR Appendix C to Part 1200 - Assurances for Teen Traffic Safety Program

Code of Federal Regulations, 2014 CFR

2014-04-01

... 23 Highways 1 2014-04-01 2014-04-01 false Assurances for Teen Traffic Safety Program C Appendix C... STATE HIGHWAY SAFETY GRANT PROGRAMS Pt. 1200, App. C Appendix C to Part 1200—Assurances for Teen Traffic Safety Program State: Fiscal Year: The State has elected to implement a Teen Traffic Safety Program—a...

Health and safety programs for art and theater schools.

PubMed

McCann, M

2001-01-01

A wide variety of health and safety hazards exist in schools and colleges of art and theater due to a lack of formal health and safety programs and a failure to include health and safety concerns during planning of new facilities and renovation of existing facilities. This chapter discusses the elements of a health and safety program as well as safety-related structural and equipment needs that should be in the plans for any school of art or theater. These elements include curriculum content, ventilation, storage, housekeeping, waste management, fire and explosion prevention, machine and tool safety, electrical safety, noise, heat stress, and life safety and emergency procedures and equipment. Ideally, these elements should be incorporated into the plans for any new facilities, but ongoing programs can also benefit from a review of existing health and safety programs.

25 CFR 170.143 - How can IRR Program funds be used for highway safety?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 1 2014-04-01 2014-04-01 false How can IRR Program funds be used for highway safety? 170... RESERVATION ROADS PROGRAM Indian Reservation Roads Program Policy and Eligibility Highway Safety Functions § 170.143 How can IRR Program funds be used for highway safety? A tribe, tribal organization, tribal...

25 CFR 170.143 - How can IRR Program funds be used for highway safety?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 1 2013-04-01 2013-04-01 false How can IRR Program funds be used for highway safety? 170... RESERVATION ROADS PROGRAM Indian Reservation Roads Program Policy and Eligibility Highway Safety Functions § 170.143 How can IRR Program funds be used for highway safety? A tribe, tribal organization, tribal...

25 CFR 170.143 - How can IRR Program funds be used for highway safety?

Code of Federal Regulations, 2012 CFR

2012-04-01

... 25 Indians 1 2012-04-01 2011-04-01 true How can IRR Program funds be used for highway safety? 170... RESERVATION ROADS PROGRAM Indian Reservation Roads Program Policy and Eligibility Highway Safety Functions § 170.143 How can IRR Program funds be used for highway safety? A tribe, tribal organization, tribal...

25 CFR 170.143 - How can IRR Program funds be used for highway safety?

Code of Federal Regulations, 2011 CFR

2011-04-01

... RESERVATION ROADS PROGRAM Indian Reservation Roads Program Policy and Eligibility Highway Safety Functions § 170.143 How can IRR Program funds be used for highway safety? A tribe, tribal organization, tribal... 25 Indians 1 2011-04-01 2011-04-01 false How can IRR Program funds be used for highway safety? 170...

25 CFR 170.143 - How can IRR Program funds be used for highway safety?

Code of Federal Regulations, 2010 CFR

2010-04-01

... RESERVATION ROADS PROGRAM Indian Reservation Roads Program Policy and Eligibility Highway Safety Functions § 170.143 How can IRR Program funds be used for highway safety? A tribe, tribal organization, tribal... 25 Indians 1 2010-04-01 2010-04-01 false How can IRR Program funds be used for highway safety? 170...

23 CFR 1200.11 - Contents.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 402 program. (g) Teen Traffic Safety Program. If the State elects to include the Teen Traffic Safety... of the Teen Traffic Safety Program—a statewide program to improve traffic safety for teen drivers—and...

23 CFR 1200.11 - Contents.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 402 program. (g) Teen Traffic Safety Program. If the State elects to include the Teen Traffic Safety... of the Teen Traffic Safety Program—a statewide program to improve traffic safety for teen drivers—and...

Alcohol safety action projects evaluation of operations : data, table of results, and formulation

DOT National Transportation Integrated Search

1979-06-01

This volume contains the data used in the evaluation of 35 Alcohol Safety Action Projects implemented throughout the country. Historical background, discussion of analytic results and factors affecting impact detecion are contained in the document ti...

Laboratory evaluation of alcohol safety interlock systems. Volume 3 : instrument performance at high BAL

DOT National Transportation Integrated Search

1974-01-01

This report contains the results of an experimental and analytical evaluation of instruments and techniques designed to prevent an intoxicated driver from operating his automobile. The prototype 'Alcohol Safety Interlock Systems' tested were develope...

Reducing the barriers against analytical epidemiological studies in investigations of local foodborne disease outbreaks in Germany - a starter kit for local health authorities.

PubMed

Werber, D; Bernard, H

2014-02-27

Thousands of infectious food-borne disease outbreaks (FBDO) are reported annually to the European Food Safety Authority within the framework of the zoonoses Directive (2003/99/EC). Most recognised FBDO occur locally following point source exposure, but only few are investigated using analytical epidemiological studies. In Germany, and probably also in other countries of the European Union, this seems to be particularly true for those investigated by local health authorities. Analytical studies, usually cohort studies or case–control studies, are a powerful tool to identify suspect food vehicles. Therefore, from a public health and food safety perspective, their more frequent usage is highly desirable. We have developed a small toolbox consisting of a strategic concept and a simple software tool for data entry and analysis, with the objective to increase the use of analytical studies in the investigation of local point source FBDO in Germany.

A Safety Program that Integrated Behavior-Based Safety and Traditional Safety Methods and Its Effects on Injury Rates of Manufacturing Workers

ERIC Educational Resources Information Center

Hermann, Jaime A.; Ibarra, Guillermo V.; Hopkins, B. L.

2010-01-01

The present research examines the effects of a complex safety program that combined Behavior-Based Safety (BBS) and traditional safety methods. The study was conducted in an automobile parts plant in Mexico. Two sister plants served as comparison. Some of the components of the safety programs addressed behaviors of managers and included methods…

Impact of a Patient Navigator Program on Hospital-Based and Outpatient Utilization Over 180 Days in a Safety-Net Health System.

PubMed

Balaban, Richard B; Zhang, Fang; Vialle-Valentin, Catherine E; Galbraith, Alison A; Burns, Marguerite E; Larochelle, Marc R; Ross-Degnan, Dennis

2017-09-01

With emerging global payment structures, medical systems need to understand longer-term impacts of care transition strategies. To determine the effect of a care transition program using patient navigators (PNs) on health service utilization among high-risk safety-net patients over a 180-day period. Randomized controlled trial conducted October 2011 through April 2013. Patients admitted to the general medicine service with ≥1 readmission risk factor: (1) age ≥ 60; (2) in-network inpatient admission within prior 6 months; (3) index length of stay ≥ 3 days; or (4) admission diagnosis of heart failure or (5) chronic obstructive pulmonary disease. The analytic sample included 739 intervention patients, 1182 controls. Through hospital visits and 30 days of post-discharge telephone outreach, PNs provided coaching and assistance with medications, appointments, transportation, communication with primary care, and self-care. Primary outcomes: (1) hospital-based utilization, a composite of ED visits and hospital admissions; (2) hospital admissions; (3) ED visits; and (4) outpatient visits. We evaluated outcomes following an index discharge, stratified by patient age (≥ 60 and < 60 years), using a 180-day time frame divided into six 30-day periods. The PN program produced starkly different outcomes by patient age. Among older PN patients, hospital-based utilization was consistently lower than controls, producing an 18.7% cumulative decrease at 180 days (p = 0.038); outpatient visits increased in the critical first 30-day period (p = 0.006). Among younger PN patients, hospital-based utilization was 31.7% (p = 0.038) higher at 180 days, largely reflecting sharply higher utilization in the initial 30 days (p = 0.002), with non-significant changes thereafter; outpatient visits experienced no significant changes. A PN program serving high-risk safety-net patients differentially impacted patients based on age, and among younger patients, outcomes varied over time. Our findings highlight the importance for future research to evaluate care transition programs among different subpopulations and over longer time periods.

Implementation of a patient safety program at a tertiary health system: A longitudinal analysis of interventions and serious safety events.

PubMed

Cropper, Douglas P; Harb, Nidal H; Said, Patricia A; Lemke, Jon H; Shammas, Nicolas W

2018-04-01

We hypothesize that implementation of a safety program based on high reliability organization principles will reduce serious safety events (SSE). The safety program focused on 7 essential elements: (a) safety rounding, (b) safety oversight teams, (c) safety huddles, (d) safety coaches, (e) good catches/safety heroes, (f) safety education, and (g) red rule. An educational curriculum was implemented focusing on changing high-risk behaviors and implementing critical safety policies. All unusual occurrences were captured in the Midas system and investigated by risk specialists, the safety officer, and the chief medical officer. A multidepartmental committee evaluated these events, and a root cause analysis (RCA) was performed. Events were tabulated and serious safety event (SSE) recorded and plotted over time. Safety success stories (SSSs) were also evaluated over time. A steady drop in SSEs was seen over 9 years. Also a rise in SSSs was evident, reflecting on staff engagement in the program. The parallel change in SSEs, SSSs, and the implementation of various safety interventions highly suggest that the program was successful in achieving its goals. A safety program based on high-reliability organization principles and made a core value of the institution can have a significant positive impact on reducing SSEs. © 2018 American Society for Healthcare Risk Management of the American Hospital Association.

29 CFR 1960.79 - Self-evaluations of occupational safety and health programs.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 9 2012-07-01 2012-07-01 false Self-evaluations of occupational safety and health programs. 1960.79 Section 1960.79 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs...

29 CFR 1960.79 - Self-evaluations of occupational safety and health programs.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 9 2014-07-01 2014-07-01 false Self-evaluations of occupational safety and health programs. 1960.79 Section 1960.79 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs...

29 CFR 1960.79 - Self-evaluations of occupational safety and health programs.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 9 2013-07-01 2013-07-01 false Self-evaluations of occupational safety and health programs. 1960.79 Section 1960.79 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs...

29 CFR 1960.79 - Self-evaluations of occupational safety and health programs.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 9 2011-07-01 2011-07-01 false Self-evaluations of occupational safety and health programs. 1960.79 Section 1960.79 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs...

29 CFR 1960.79 - Self-evaluations of occupational safety and health programs.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 9 2010-07-01 2010-07-01 false Self-evaluations of occupational safety and health programs. 1960.79 Section 1960.79 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs...

Traffic behaviour among adolescents using mopeds and light motorcycles.

PubMed

Njå, Ove; Nesvåg, Sverre M

2007-01-01

Motorcycling is recognized to be a relatively risky activity. Powered two wheelers (PTW) are classified as mopeds, light, and heavy motorcycles, the first two categories being denoted light PTWs. This paper reviews the scientific literature on accident risks and traffic behavior among users of light PTWs with the aim of clarifying the current state of knowledge. Based on a risk analytical and an anthropological perspective on motorcycling, the paper discusses the significance of cultural and social factors as important aspects of safety. More targeted and effective safety measures, for example better training programs, are needed to prevent motorcycle accidents. This means developing a deeper understanding of the rider as an individual, and the individuals within different groups and settings. Why and how motorcyclists approach the road, its function as a social arena, the varieties of goals and values, and the motorcyclists' own perceptions of the behavior that ensures their "achievements" or "successes", are some of the issues. Today, this kind of knowledge is scarce and almost entirely absent from the scientific literature. We conclude that the massive quantities of data on numbers of accidents, the categorization of situations, the causal explanations related to speed, gender, age, lack of concentration so forth, can only be employed as support for safety measures as long as they are linked to social and cultural factors. Risk informed decision making has become an integral part of authorities' and manufacturers' implementation of safety measures. This tendency is strengthened by the fact that the responsibility of product safety rests upon the manufacturers, cf. for example EU safety regulations. Therefore it is paramount that a thorough understanding of social and cultural factors related to the PTW driving is necessary for the industry to develop targeted and efficient safety measures.

Quantitative assessment of prevalence of pre-analytical variables and their effect on coagulation assay. Can intervention improve patient safety?

PubMed

Bhushan, Ravi; Sen, Arijit

2017-04-01

Very few Indian studies exist on evaluation of pre-analytical variables affecting "Prothrombin Time" the commonest coagulation assay performed. The study was performed in an Indian tertiary care setting with an aim to assess quantitatively the prevalence of pre-analytical variables and their effects on the results (patient safety), for Prothrombin time test. The study also evaluated their effects on the result and whether intervention, did correct the results. The firstly evaluated the prevalence for various pre-analytical variables detected in samples sent for Prothrombin Time testing. These samples with the detected variables wherever possible were tested and result noted. The samples from the same patients were repeated and retested ensuring that no pre-analytical variable is present. The results were again noted to check for difference the intervention produced. The study evaluated 9989 samples received for PT/INR over a period of 18 months. The prevalence of different pre-analytical variables was found to be 862 (8.63%). The proportion of various pre-analytical variables detected were haemolysed samples 515 (5.16%), over filled vacutainers 62 (0.62%), under filled vacutainers 39 (0.39%), low values 205 (2.05%), clotted samples 11 (0.11%), wrong labeling 4 (0.04%), wrong vacutainer use 2 (0.02%), chylous samples 7 (0.07%) and samples with more than one variable 17 (0.17%). The comparison of percentage of samples showing errors were noted for the first variables since they could be tested with and without the variable in place. The reduction in error percentage was 91.5%, 69.2%, 81.5% and 95.4% post intervention for haemolysed, overfilled, under filled and samples collected with excess pressure at phlebotomy respectively. Correcting the variables did reduce the error percentage to a great extent in these four variables and hence the variables are found to affect "Prothrombin Time" testing and can hamper patient safety.

2011 Annual Criticality Safety Program Performance Summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andrea Hoffman

The 2011 review of the INL Criticality Safety Program has determined that the program is robust and effective. The review was prepared for, and fulfills Contract Data Requirements List (CDRL) item H.20, 'Annual Criticality Safety Program performance summary that includes the status of assessments, issues, corrective actions, infractions, requirements management, training, and programmatic support.' This performance summary addresses the status of these important elements of the INL Criticality Safety Program. Assessments - Assessments in 2011 were planned and scheduled. The scheduled assessments included a Criticality Safety Program Effectiveness Review, Criticality Control Area Inspections, a Protection of Controlled Unclassified Information Inspection,more » an Assessment of Criticality Safety SQA, and this management assessment of the Criticality Safety Program. All of the assessments were completed with the exception of the 'Effectiveness Review' for SSPSF, which was delayed due to emerging work. Although minor issues were identified in the assessments, no issues or combination of issues indicated that the INL Criticality Safety Program was ineffective. The identification of issues demonstrates the importance of an assessment program to the overall health and effectiveness of the INL Criticality Safety Program. Issues and Corrective Actions - There are relatively few criticality safety related issues in the Laboratory ICAMS system. Most were identified by Criticality Safety Program assessments. No issues indicate ineffectiveness in the INL Criticality Safety Program. All of the issues are being worked and there are no imminent criticality concerns. Infractions - There was one criticality safety related violation in 2011. On January 18, 2011, it was discovered that a fuel plate bundle in the Nuclear Materials Inspection and Storage (NMIS) facility exceeded the fissionable mass limit, resulting in a technical safety requirement (TSR) violation. The TSR limits fuel plate bundles to 1085 grams U-235, which is the maximum loading of an ATR fuel element. The overloaded fuel plate bundle contained 1097 grams U-235 and was assembled under an 1100 gram U-235 limit in 1982. In 2003, the limit was reduced to 1085 grams citing a new criticality safety evaluation for ATR fuel elements. The fuel plate bundle inventories were not checked for compliance prior to implementing the reduced limit. A subsequent review of the NMIS inventory did not identify further violations. Requirements Management - The INL Criticality Safety program is organized and well documented. The source requirements for the INL Criticality Safety Program are from 10 CFR 830.204, DOE Order 420.1B, Chapter III, 'Nuclear Criticality Safety,' ANSI/ANS 8-series Industry Standards, and DOE Standards. These source requirements are documented in LRD-18001, 'INL Criticality Safety Program Requirements Manual.' The majority of the criticality safety source requirements are contained in DOE Order 420.1B because it invokes all of the ANSI/ANS 8-Series Standards. DOE Order 420.1B also invokes several DOE Standards, including DOE-STD-3007, 'Guidelines for Preparing Criticality Safety Evaluations at Department of Energy Non-Reactor Nuclear Facilities.' DOE Order 420.1B contains requirements for DOE 'Heads of Field Elements' to approve the criticality safety program and specific elements of the program, namely, the qualification of criticality staff and the method for preparing criticality safety evaluations. This was accomplished by the approval of SAR-400, 'INL Standardized Nuclear Safety Basis Manual,' Chapter 6, 'Prevention of Inadvertent Criticality.' Chapter 6 of SAR-400 contains sufficient detail and/or reference to the specific DOE and contractor documents that adequately describe the INL Criticality Safety Program per the elements specified in DOE Order 420.1B. The Safety Evaluation Report for SAR-400 specifically recognizes that the approval of SAR-400 approves the INL Criticality Safety Program. No new source requirements were released in 2011. A revision to LRD-18001 is planned for 2012 to clarify design requirements for criticality alarms. Training - Criticality Safety Engineering has developed training and provides training for many employee positions, including fissionable material handlers, facility managers, criticality safety officers, firefighters, and criticality safety engineers. Criticality safety training at the INL is a program strength. A revision to the training module developed in 2010 to supplement MFC certified fissionable material handlers (operators) training was prepared and presented in August of 2011. This training, 'Applied Science of Criticality Safety,' builds upon existing training and gives operators a better understanding of how their criticality controls are derived. Improvements to 00INL189, 'INL Criticality Safety Principles' are planned for 2012 to strengthen fissionable material handler training.« less

External quality-assurance results for the National Atmospheric Deposition Program and the National Trends Network during 1986

USGS Publications Warehouse

See, Randolph B.; Schroder, LeRoy J.; Willoughby, Timothy C.

1988-01-01

During 1986, the U.S. Geological Survey operated three programs to provide external quality-assurance monitoring of the National Atmospheric Deposition Program and National Trends Network. An intersite-comparison program was used to assess the accuracy of onsite pH and specific-conductance determinations at quarterly intervals. The blind-audit program was used to assess the effect of routine sample handling on the precision and bias of program and network wet-deposition data. Analytical results from four laboratories, which routinely analyze wet-deposition samples, were examined to determine if differences existed between laboratory analytical results and to provide estimates of the analytical precision of each laboratory. An average of 78 and 89 percent of the site operators participating in the intersite-comparison met the network goals for pH and specific conductance. A comparison of analytical values versus actual values for samples submitted as part of the blind-audit program indicated that analytical values were slightly but significantly (a = 0.01) larger than actual values for pH, magnesium, sodium, and sulfate; analytical values for specific conductance were slightly less than actual values. The decreased precision in the analyses of blind-audit samples when compared to interlaboratory studies indicates that a large amount of uncertainty in network deposition data may be a result of routine field operations. The results of the interlaboratory comparison study indicated that the magnitude of the difference between laboratory analyses was small for all analytes. Analyses of deionized, distilled water blanks by participating laboratories indicated that the laboratories had difficulty measuring analyte concentrations near their reported detection limits. (USGS)

Development of airframe design technology for crashworthiness.

NASA Technical Reports Server (NTRS)

Kruszewski, E. T.; Thomson, R. G.

1973-01-01

This paper describes the NASA portion of a joint FAA-NASA General Aviation Crashworthiness Program leading to the development of improved crashworthiness design technology. The objectives of the program are to develop analytical technology for predicting crashworthiness of structures, provide design improvements, and perform full-scale crash tests. The analytical techniques which are being developed both in-house and under contract are described, and typical results from these analytical programs are shown. In addition, the full-scale testing facility and test program are discussed.

Groundwater monitoring of hydraulic fracturing in California: Recommendations for permit-required monitoring

NASA Astrophysics Data System (ADS)

Esser, B. K.; Beller, H. R.; Carroll, S.; Cherry, J. A.; Jackson, R. B.; Jordan, P. D.; Madrid, V.; Morris, J.; Parker, B. L.; Stringfellow, W. T.; Varadharajan, C.; Vengosh, A.

2015-12-01

California recently passed legislation mandating dedicated groundwater quality monitoring for new well stimulation operations. The authors provided the State with expert advice on the design of such monitoring networks. Factors that must be considered in designing a new and unique groundwater monitoring program include: Program design: The design of a monitoring program is contingent on its purpose, which can range from detection of individual well leakage to demonstration of regional impact. The regulatory goals for permit-required monitoring conducted by operators on a well-by-well basis will differ from the scientific goals of a regional monitoring program conducted by the State. Vulnerability assessment: Identifying factors that increase the probability of transport of fluids from the hydrocarbon target zone to a protected groundwater zone enables the intensity of permit-required monitoring to be tiered by risk and also enables prioritization of regional monitoring of groundwater basins based on vulnerability. Risk factors include well integrity; proximity to existing wellbores and geologic features; wastewater disposal; vertical separation between the hydrocarbon and groundwater zones; and site-specific hydrogeology. Analyte choice: The choice of chemical analytes in a regulatory monitoring program is guided by the goals of detecting impact, assuring public safety, preventing resource degradation, and minimizing cost. Balancing these goals may be best served by tiered approach in which targeted analysis of specific chemical additives is triggered by significant changes in relevant but more easily analyzed constituents. Such an approach requires characterization of baseline conditions, especially in areas with long histories of oil and gas development. Monitoring technology: Monitoring a deep subsurface process or a long wellbore is more challenging than monitoring a surface industrial source. The requirement for monitoring multiple groundwater aquifers across a range of depths and of monitoring at deeper depths than is typical for regulatory monitoring programs requires consideration of monitoring technology, which can range from clusters of wells to multiple wells in a single wellbore to multi-level systems in a single cased wellbore.

49 CFR 659.19 - System safety program plan: contents.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 7 2012-10-01 2012-10-01 false System safety program plan: contents. 659.19... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the State Oversight Agency § 659.19 System safety program plan: contents. The system safety plan shall...

49 CFR 659.19 - System safety program plan: contents.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 7 2011-10-01 2011-10-01 false System safety program plan: contents. 659.19... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the State Oversight Agency § 659.19 System safety program plan: contents. The system safety plan shall...

49 CFR 659.19 - System safety program plan: contents.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 7 2013-10-01 2013-10-01 false System safety program plan: contents. 659.19... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the State Oversight Agency § 659.19 System safety program plan: contents. The system safety plan shall...

49 CFR 659.19 - System safety program plan: contents.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 7 2014-10-01 2014-10-01 false System safety program plan: contents. 659.19... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the State Oversight Agency § 659.19 System safety program plan: contents. The system safety plan shall...

49 CFR 659.19 - System safety program plan: contents.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false System safety program plan: contents. 659.19... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the State Oversight Agency § 659.19 System safety program plan: contents. The system safety plan shall...

Results of the U. S. Geological Survey's analytical evaluation program for standard reference samples distributed in April 2001

USGS Publications Warehouse

Woodworth, M.T.; Connor, B.F.

2001-01-01

This report presents the results of the U.S. Geological Survey's analytical evaluation program for six standard reference samples -- T-165 (trace constituents), M-158 (major constituents), N-69 (nutrient constituents), N-70 (nutrient constituents), P-36 (low ionic-strength constituents), and Hg-32 (mercury) -- that were distributed in April 2001 to laboratories enrolled in the U.S. Geological Survey sponsored interlaboratory testing program. Analytical data received from 73 laboratories were evaluated with respect to overall laboratory performance and relative laboratory performance for each analyte in the six reference samples. Results of these evaluations are presented in tabular form. Also presented are tables and graphs summarizing the analytical data provided by each laboratory for each analyte in the six standard reference samples. The most probable value for each analyte was determined using nonparametric statistics.

Results of the U. S. Geological Survey's Analytical Evaluation Program for Standard Reference Samples Distributed in March 2002

USGS Publications Warehouse

Woodworth, M.T.; Conner, B.F.

2002-01-01

This report presents the results of the U.S. Geological Survey's analytical evaluation program for six standard reference samples -- T- 169 (trace constituents), M- 162 (major constituents), N-73 (nutrient constituents), N-74 (nutrient constituents), P-38 (low ionic-strength constituents), and Hg-34 (mercury) -- that were distributed in March 2002 to laboratories enrolled in the U.S. Geological Survey sponsored intedaboratory testing program. Analytical data received from 93 laboratories were evaluated with respect to overall laboratory performance and relative laboratory performance for each analyte in the six reference samples. Results of these evaluations are presented in tabular form. Also presented are tables and graphs summarizing the analytical data provided by each laboratory for each analyte in the six standard reference samples. The most probable value for each analyte was determined using nonparametric statistics.

Results of the U.S. Geological Survey's analytical evaluation program for standard reference samples distributed in September 2002

USGS Publications Warehouse

Woodworth, Mark T.; Connor, Brooke F.

2003-01-01

This report presents the results of the U.S. Geological Survey's analytical evaluation program for six standard reference samples -- T-171 (trace constituents), M-164 (major constituents), N-75 (nutrient constituents), N-76 (nutrient constituents), P-39 (low ionic-strength constituents), and Hg-35 (mercury) -- that were distributed in September 2002 to laboratories enrolled in the U.S. Geological Survey sponsored interlaboratory testing program. Analytical data received from 102 laboratories were evaluated with respect to overall laboratory performance and relative laboratory performance for each analyte in the six reference samples. Results of these evaluations are presented in tabular form. Also presented are tables and graphs summarizing the analytical data provided by each laboratory for each analyte in the six standard reference samples. The most probable value for each analyte was determined using nonparametric statistics.

Results of the U.S. Geological Survey's analytical evaluation program for standard reference samples distributed in September 2001

USGS Publications Warehouse

Woodworth, Mark T.; Connor, Brooke F.

2002-01-01

This report presents the results of the U.S. Geological Survey's analytical evaluation program for six standard reference samples -- T-167 (trace constituents), M-160 (major constituents), N-71 (nutrient constituents), N-72 (nutrient constituents), P-37 (low ionic-strength constituents), and Hg-33 (mercury) -- that were distributed in September 2001 to laboratories enrolled in the U.S. Geological Survey sponsored interlaboratory testing program. Analytical data received from 98 laboratories were evaluated with respect to overall laboratory performance and relative laboratory performance for each analyte in the six reference samples. Results of these evaluations are presented in tabular form. Also presented are tables and graphs summarizing the analytical data provided by each laboratory for each analyte in the six standard reference samples. The most probable value for each analyte was determined using nonparametric statistics.

Results of the U.S. Geological Survey's Analytical Evaluation Program for Standard Reference Samples Distributed in March 2000

USGS Publications Warehouse

Farrar, Jerry W.; Copen, Ashley M.

2000-01-01

This report presents the results of the U.S. Geological Survey's analytical evaluation program for six standard reference samples -- T-161 (trace constituents), M-154 (major constituents), N-65 (nutrient constituents), N-66 nutrient constituents), P-34 (low ionic strength constituents), and Hg-30 (mercury) -- that were distributed in March 2000 to 144 laboratories enrolled in the U.S. Geological Survey sponsored interlaboratory testing program. Analytical data that were received from 132 of the laboratories were evaluated with respect to overall laboratory performance and relative laboratory performance for each analyte in the six reference samples. Results of these evaluations are presented in tabular form. Also presented are tables and graphs summarizing the analytical data provided by each laboratory for each analyte in the six standard reference samples. The most probable value for each analyte was determined using nonparametric statistics.

Results of the U.S. Geological Survey's analytical evaluation program for standard reference samples distributed in October 1999

USGS Publications Warehouse

Farrar, T.W.

2000-01-01

This report presents the results of the U.S. Geological Survey's analytical evaluation program for six standard reference samples -- T-159 (trace constituents), M-152 (major constituents), N-63 (nutrient constituents), N-64 (nutrient constituents), P-33 (low ionic strength constituents), and Hg-29 (mercury) -- that were distributed in October 1999 to 149 laboratories enrolled in the U.S. Geological Survey sponsored interlaboratory testing program. Analytical data that were received from 131 of the laboratories were evaluated with respect to overall laboratory performance and relative laboratory performance for each analyte in the six reference samples. Results of these evaluations are presented in tabular form. Also presented are tables and graphs summarizing the analytical data provided by each laboratory for each analyte in the six standard reference samples. The most probable value for each analyte was determined using nonparametric statistics.

Results of the U.S. Geological Survey's analytical evaluation program for standard reference samples distributed in March 2003

USGS Publications Warehouse

Woodworth, Mark T.; Connor, Brooke F.

2003-01-01

This report presents the results of the U.S. Geological Survey's analytical evaluation program for six standard reference samples -- T-173 (trace constituents), M-166 (major constituents), N-77 (nutrient constituents), N-78 (nutrient constituents), P-40 (low ionic-strength constituents), and Hg-36 (mercury) -- that were distributed in March 2003 to laboratories enrolled in the U.S. Geological Survey sponsored interlaboratory testing program. Analytical data received from 110 laboratories were evaluated with respect to overall laboratory performance and relative laboratory performance for each analyte in the six reference samples. Results of these evaluations are presented in tabular form. Also presented are tables and graphs summarizing the analytical data provided by each laboratory for each analyte in the six standard reference samples. The most probable value for each analyte was determined using nonparametric statistics.

Results of the U. S. Geological Survey's analytical evaluation program for standard reference samples distributed in October 2000

USGS Publications Warehouse

Connor, B.F.; Currier, J.P.; Woodworth, M.T.

2001-01-01

This report presents the results of the U.S. Geological Survey's analytical evaluation program for six standard reference samples -- T-163 (trace constituents), M-156 (major constituents), N-67 (nutrient constituents), N-68 (nutrient constituents), P-35 (low ionic strength constituents), and Hg-31 (mercury) -- that were distributed in October 2000 to 126 laboratories enrolled in the U.S. Geological Survey sponsored interlaboratory testing program. Analytical data that were received from 122 of the laboratories were evaluated with respect to overall laboratory performance and relative laboratory performance for each analyte in the six reference samples. Results of these evaluations are presented in tabular form. Also presented are tables and graphs summarizing the analytical data provided by each laboratory for each analyte in the six standard reference samples. The most probable value for each analyte was determined using nonparametric statistics.

FMCSA safety program effectiveness measurement : Roadside Intervention Effectiveness Model FY 2012, [analysis brief].

DOT National Transportation Integrated Search

2016-02-01

Roadside Inspection and Traffic Enforcement are two of : the Federal Motor Carrier Safety Administrations : (FMCSAs) key safety programs. The Roadside : Inspection Program consists of roadside inspections : performed by qualified safety inspect...

FMCSA safety program effectiveness measurement : roadside intervention effectiveness model FY 2011 : [analysis brief].

DOT National Transportation Integrated Search

2015-06-01

Roadside Inspection and Traffic Enforcement are two of the Federal Motor Carrier Safety Administrations (FMCSAs) key safety programs. The Roadside Inspection program consists of roadside inspections performed by qualified safety inspectors. The...

Writing analytic element programs in Python.

PubMed

Bakker, Mark; Kelson, Victor A

2009-01-01

The analytic element method is a mesh-free approach for modeling ground water flow at both the local and the regional scale. With the advent of the Python object-oriented programming language, it has become relatively easy to write analytic element programs. In this article, an introduction is given of the basic principles of the analytic element method and of the Python programming language. A simple, yet flexible, object-oriented design is presented for analytic element codes using multiple inheritance. New types of analytic elements may be added without the need for any changes in the existing part of the code. The presented code may be used to model flow to wells (with either a specified discharge or drawdown) and streams (with a specified head). The code may be extended by any hydrogeologist with a healthy appetite for writing computer code to solve more complicated ground water flow problems. Copyright © 2009 The Author(s). Journal Compilation © 2009 National Ground Water Association.

14 CFR 91.25 - Aviation Safety Reporting Program: Prohibition against use of reports for enforcement purposes.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Aviation Safety Reporting Program... GENERAL OPERATING AND FLIGHT RULES General § 91.25 Aviation Safety Reporting Program: Prohibition against... to the National Aeronautics and Space Administration under the Aviation Safety Reporting Program (or...

42 CFR 9.10 - Occupational Health and Safety Program (OHSP) and biosafety requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 1 2013-10-01 2013-10-01 false Occupational Health and Safety Program (OHSP) and... SANCTUARY SYSTEM § 9.10 Occupational Health and Safety Program (OHSP) and biosafety requirements. (a) How are employee Occupational Health and Safety Program risks and concerns addressed? The sanctuary shall...

42 CFR 9.10 - Occupational Health and Safety Program (OHSP) and biosafety requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 1 2014-10-01 2014-10-01 false Occupational Health and Safety Program (OHSP) and... SANCTUARY SYSTEM § 9.10 Occupational Health and Safety Program (OHSP) and biosafety requirements. (a) How are employee Occupational Health and Safety Program risks and concerns addressed? The sanctuary shall...

42 CFR 9.10 - Occupational Health and Safety Program (OHSP) and biosafety requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 1 2012-10-01 2012-10-01 false Occupational Health and Safety Program (OHSP) and... SANCTUARY SYSTEM § 9.10 Occupational Health and Safety Program (OHSP) and biosafety requirements. (a) How are employee Occupational Health and Safety Program risks and concerns addressed? The sanctuary shall...

42 CFR 9.10 - Occupational Health and Safety Program (OHSP) and biosafety requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 1 2011-10-01 2011-10-01 false Occupational Health and Safety Program (OHSP) and... SANCTUARY SYSTEM § 9.10 Occupational Health and Safety Program (OHSP) and biosafety requirements. (a) How are employee Occupational Health and Safety Program risks and concerns addressed? The sanctuary shall...

OSHA Training Programs. Module SH-48. Safety and Health.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on OSHA (Occupational Safety and Health Act) training programs is one of 50 modules concerned with job safety and health. This module provides a list of OSHA training requirements and describes OSHA training programs and other safety organizations' programs. Following the introduction, 11 objectives (each keyed to a page in the…

42 CFR 9.10 - Occupational Health and Safety Program (OHSP) and biosafety requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Occupational Health and Safety Program (OHSP) and... SANCTUARY SYSTEM § 9.10 Occupational Health and Safety Program (OHSP) and biosafety requirements. (a) How are employee Occupational Health and Safety Program risks and concerns addressed? The sanctuary shall...

A program wide framework for evaluating data driven teaching and learning - earth analytics approaches, results and lessons learned

NASA Astrophysics Data System (ADS)

Wasser, L. A.; Gold, A. U.

2017-12-01

There is a deluge of earth systems data available to address cutting edge science problems yet specific skills are required to work with these data. The Earth analytics education program, a core component of Earth Lab at the University of Colorado - Boulder - is building a data intensive program that provides training in realms including 1) interdisciplinary communication and collaboration 2) earth science domain knowledge including geospatial science and remote sensing and 3) reproducible, open science workflows ("earth analytics"). The earth analytics program includes an undergraduate internship, undergraduate and graduate level courses and a professional certificate / degree program. All programs share the goals of preparing a STEM workforce for successful earth analytics driven careers. We are developing an program-wide evaluation framework that assesses the effectiveness of data intensive instruction combined with domain science learning to better understand and improve data-intensive teaching approaches using blends of online, in situ, asynchronous and synchronous learning. We are using targeted online search engine optimization (SEO) to increase visibility and in turn program reach. Finally our design targets longitudinal program impacts on participant career tracts over time.. Here we present results from evaluation of both an interdisciplinary undergrad / graduate level earth analytics course and and undergraduate internship. Early results suggest that a blended approach to learning and teaching that includes both synchronous in-person teaching and active classroom hands-on learning combined with asynchronous learning in the form of online materials lead to student success. Further we will present our model for longitudinal tracking of participant's career focus overtime to better understand long-term program impacts. We also demonstrate the impact of SEO optimization on online content reach and program visibility.

An Operational Safety and Health Program.

ERIC Educational Resources Information Center

Uhorchak, Robert E.

1983-01-01

Describes safety/health program activities at Research Triangle Institute (North Carolina). These include: radioisotope/radiation and hazardous chemical/carcinogen use, training, monitoring, disposal; chemical waste management; air monitoring and analysis; medical program; fire safety/training, including emergency planning; Occupational Safety and…

Positive lists of cosmetic ingredients: Analytical methodology for regulatory and safety controls - A review.

PubMed

Lores, Marta; Llompart, Maria; Alvarez-Rivera, Gerardo; Guerra, Eugenia; Vila, Marlene; Celeiro, Maria; Lamas, J Pablo; Garcia-Jares, Carmen

2016-04-07

Cosmetic products placed on the market and their ingredients, must be safe under reasonable conditions of use, in accordance to the current legislation. Therefore, regulated and allowed chemical substances must meet the regulatory criteria to be used as ingredients in cosmetics and personal care products, and adequate analytical methodology is needed to evaluate the degree of compliance. This article reviews the most recent methods (2005-2015) used for the extraction and the analytical determination of the ingredients included in the positive lists of the European Regulation of Cosmetic Products (EC 1223/2009): comprising colorants, preservatives and UV filters. It summarizes the analytical properties of the most relevant analytical methods along with the possibilities of fulfilment of the current regulatory issues. The cosmetic legislation is frequently being updated; consequently, the analytical methodology must be constantly revised and improved to meet safety requirements. The article highlights the most important advances in analytical methodology for cosmetics control, both in relation to the sample pretreatment and extraction and the different instrumental approaches developed to solve this challenge. Cosmetics are complex samples, and most of them require a sample pretreatment before analysis. In the last times, the research conducted covering this aspect, tended to the use of green extraction and microextraction techniques. Analytical methods were generally based on liquid chromatography with UV detection, and gas and liquid chromatographic techniques hyphenated with single or tandem mass spectrometry; but some interesting proposals based on electrophoresis have also been reported, together with some electroanalytical approaches. Regarding the number of ingredients considered for analytical control, single analyte methods have been proposed, although the most useful ones in the real life cosmetic analysis are the multianalyte approaches. Copyright © 2016 Elsevier B.V. All rights reserved.

Flightdeck Automation Problems (FLAP) Model for Safety Technology Portfolio Assessment

NASA Technical Reports Server (NTRS)

Ancel, Ersin; Shih, Ann T.

2014-01-01

NASA's Aviation Safety Program (AvSP) develops and advances methodologies and technologies to improve air transportation safety. The Safety Analysis and Integration Team (SAIT) conducts a safety technology portfolio assessment (PA) to analyze the program content, to examine the benefits and risks of products with respect to program goals, and to support programmatic decision making. The PA process includes systematic identification of current and future safety risks as well as tracking several quantitative and qualitative metrics to ensure the program goals are addressing prominent safety risks accurately and effectively. One of the metrics within the PA process involves using quantitative aviation safety models to gauge the impact of the safety products. This paper demonstrates the role of aviation safety modeling by providing model outputs and evaluating a sample of portfolio elements using the Flightdeck Automation Problems (FLAP) model. The model enables not only ranking of the quantitative relative risk reduction impact of all portfolio elements, but also highlighting the areas with high potential impact via sensitivity and gap analyses in support of the program office. Although the model outputs are preliminary and products are notional, the process shown in this paper is essential to a comprehensive PA of NASA's safety products in the current program and future programs/projects.

Informing a pedestrian safety improvement program.

DOT National Transportation Integrated Search

2009-01-01

Caltrans is scoping the development of a Pedestrian Safety Improvement Program (PSIP). In its mission, organization or implementation, such a program might be analogous to the agencys existing Highway Safety Improvement Program (HSIP). The HSIP (s...

Canadian Pacific Railway Investigation of Safety-Related Occurrences Protocol considered helpful by both labor and management.

DOT National Transportation Integrated Search

2006-09-01

The Federal Railroad Administration (FRA) Human Factors Research and Development (R&D) Program sponsored an Alternative Safety Measures Program designed to explore alternative methods for evaluating whether safety programs improve safety outcomes and...

Strategies to increase the use of child safety seats : an assessment of current knowledge

DOT National Transportation Integrated Search

1986-12-01

This analytic literature research reports on characteristics of child-safety-seat (CSS) users and nonusers, and on the efficacy of approaches to increasing CSS use. It concentrates on human factors issues in CSS use, excluding technical studies on de...

The Savannah River Site's Groundwater Monitoring Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This report summarizes the Savannah River Site (SRS) groundwater monitoring program conducted during the first quarter of 1992. It includes the analytical data, field data, data review, quality control, and other documentation for this program; provides a record of the program's activities; and serves as an official document of the analytical results.

The Savannah River Site`s Groundwater Monitoring Program. First quarter 1992

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This report summarizes the Savannah River Site (SRS) groundwater monitoring program conducted during the first quarter of 1992. It includes the analytical data, field data, data review, quality control, and other documentation for this program; provides a record of the program`s activities; and serves as an official document of the analytical results.

HIPAA Compliant Wireless Sensing Smartwatch Application for the Self-Management of Pediatric Asthma

PubMed Central

Hosseini, Anahita; Buonocore, Chris M.; Hashemzadeh, Sepideh; Hojaiji, Hannaneh; Kalantarian, Haik; Sideris, Costas; Bui, Alex A.T.; King, Christine E.; Sarrafzadeh, Majid

2018-01-01

Asthma is the most prevalent chronic disease among pediatrics, as it is the leading cause of student absenteeism and hospitalization for those under the age of 15. To address the significant need to manage this disease in children, the authors present a mobile health (mHealth) system that determines the risk of an asthma attack through physiological and environmental wireless sensors and representational state transfer application program interfaces (RESTful APIs). The data is sent from wireless sensors to a smartwatch application (app) via a Health Insurance Portability and Accountability Act (HIPAA) compliant cryptography framework, which then sends data to a cloud for real-time analytics. The asthma risk is then sent to the smartwatch and provided to the user via simple graphics for easy interpretation by children. After testing the safety and feasibility of the system in an adult with moderate asthma prior to testing in children, it was found that the analytics model is able to determine the overall asthma risk (high, medium, or low risk) with an accuracy of 80.10±14.13%. Furthermore, the features most important for assessing the risk of an asthma attack were multifaceted, highlighting the importance of continuously monitoring different wireless sensors and RESTful APIs. Future testing this asthma attack risk prediction system in pediatric asthma individuals may lead to an effective self-management asthma program. PMID:29354688

The J-2X Fuel Turbopump - Turbine Nozzle Low Cycle Fatigue Acceptance Rationale

NASA Technical Reports Server (NTRS)

Hawkins, Lakiesha V.; Duke, Gregory C.; Newman, Wesley R.; Reynolds, David C.

2011-01-01

The J-2X Fuel Turbopump (FTP) turbine, which drives the pump that feeds hydrogen to the J-2X engine for main combustion, is based on the J-2S design developed in the early 1970 s. Updated materials and manufacturing processes have been incorporated to meet current requirements. This paper addresses an analytical concern that the J-2X Fuel Turbine Nozzle Low Cycle Fatigue (LCF) analysis did not meet safety factor requirements per program structural assessment criteria. High strains in the nozzle airfoil during engine transients were predicted to be caused by thermally induced stresses between the vane hub, vane shroud, and airfoil. The heritage J-2 nozzle was of a similar design and experienced cracks in the same area where analysis predicted cracks in the J-2X design. Redesign options that did not significantly impact the overall turbine configuration were unsuccessful. An approach using component tests and displacement controlled fracture mechanics analysis to evaluate LCF crack initiation and growth rate was developed. The results of this testing and analysis were used to define the level of inspection on development engine test units. The programmatic impact of developing crack initiation/growth rate/arrest data was significant for the J-2X program. Final Design Certification Review acceptance logic will ultimately be developed utilizing this test and analytical data.

WHAEM: PROGRAM DOCUMENTATION FOR THE WELLHEAD ANALYTIC ELEMENT MODEL (EPA/600/SR-94/210)

EPA Science Inventory

A new computer program has been developed to determine time-of-travel capture zones in relatively simple geohydrological settings. The WhAEM package contains an analytic element model that uses superposition of (many) closed form analytical solutions to generate a groundwater flo...

A Laboratory Safety Program at Delaware.

ERIC Educational Resources Information Center

Whitmyre, George; Sandler, Stanley I.

1986-01-01

Describes a laboratory safety program at the University of Delaware. Includes a history of the program's development, along with standard safety training and inspections now being implemented. Outlines a two-day laboratory safety course given to all graduate students and staff in chemical engineering. (TW)

Research notes : are safety corridors really safe? Evaluation of the corridor safety improvement program.

DOT National Transportation Integrated Search

1998-08-26

High accident frequencies on Oregons highway corridors are of concern to the Oregon Department of Transportation (ODOT). : ODOT adopted the Corridor Safety Improvement Program as part of an overall program of safety improvements using federal and ...

Changing Safety Culture, One Step at a Time: The Value of the DOE-VPP Program at PNNL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wright, Patrick A.; Isern, Nancy G.

2005-02-01

The primary value of the Pacific Northwest National Laboratory (PNNL) Voluntary Protection Program (VPP) is the ongoing partnership between management and staff committed to change Laboratory safety culture one step at a time. VPP enables PNNL's safety and health program to transcend a top-down, by-the-book approach to safety, and it also raises grassroots safety consciousness by promoting a commitment to safety and health 24 hours a day, 7 days a week. PNNL VPP is a dynamic, evolving program that fosters innovative approaches to continuous improvement in safety and health performance at the Laboratory.

Natural Atmospheric Environment Model Development for the National Aeronautics and Space Administration's Second Generation Reusable Launch Vehicle

NASA Technical Reports Server (NTRS)

Roberts, Barry C.; Leahy, Frank; Overbey, Glenn; Batts, Glen W.; Parker, Nelson (Technical Monitor)

2002-01-01

The National Aeronautics and Space Administration (NASA) recently began development of a new reusable launch vehicle. The program office is located at Marshall Space Flight Center (MSFC) and is called the Second Generation Reusable Launch Vehicle (2GRLV). The purpose of the program is to improve upon the safety and reliability of the first generation reusable launch vehicle, the Space Shuttle. Specifically, the goals are to reduce the risk of crew loss to less than 1-in-10,000 missions and decreased costs by a factor of 10 to approximately $1,000 per pound of payload launched to low Earth orbit. The program is currently in the very early stages of development and many two-stage vehicle concepts will be evaluated. Risk reduction activities are also taking place. These activities include developing new technologies and advancing current technologies to be used by the vehicle. The Environments Group at MSFC is tasked by the 2GRLV Program to develop and maintain an extensive series of analytical tools and environmental databases which enable it to provide detailed atmospheric studies in support of structural, guidance, navigation and control, and operation of the 2GRLV.

Patient Safety Executive Walkarounds

PubMed Central

Feitelberg, Steven P

2006-01-01

The KP Patient Safety Executive Walkarounds Program in the KP San Diego Service Area was developed to provide routine opportunities for senior KP leaders, staff, and clinicians to discuss patient safety concerns proactively, working closely with our labor partners to foster a culture of safety that supports our staff and physicians. Throughout the KP San Diego Service Area, the Walkarounds program plays a major part in promoting responsible identification and reporting of patient safety issues. Because each staff member has an equal voice in discussing patient safety concerns, the program enables all employees—union and nonunion alike—to engage directly in discussions about improving patient safety. The KPSC leadership has recognized this program as a major demonstration that the leadership supports patient safety and promotes reporting of safety issues in a “just culture.” PMID:21519438

Bertolette Selected as EHS Champion of Safety | Poster

Cancer.gov

Dan Bertolette has been selected as the most recent NCI at Frederick Champion of Safety, as part of the Champions of Safety Program sponsored by the Environment, Health, and Safety Program (EHS). The goal of the program, which began last year, is to raise awareness and promote a culture of safety by showing NCI at Frederick staff at work in their respective workplaces,

SNTP environmental, safety, and health

NASA Technical Reports Server (NTRS)

Harmon, Charles D.

1993-01-01

Viewgraphs on space nuclear thermal propulsion (SNTP) environmental, safety, and health are presented. Topics covered include: program safety policy; program safety policies; and DEIS public hearing comments.

49 CFR 214.303 - Railroad on-track safety programs, generally.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Railroad on-track safety programs, generally. 214... RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD WORKPLACE SAFETY Roadway Worker Protection § 214.303 Railroad on-track safety programs, generally. (a) Each railroad to which this part applies...

49 CFR 659.15 - System safety program standard.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false System safety program standard. 659.15 Section 659... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the State Oversight Agency § 659.15 System safety program standard. (a) General requirement. Each state...

78 FR 39587 - Uniform Procedures for State Highway Safety Grant Programs

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-02

... DEPARTMENT OF TRANSPORTATION National Highway Traffic Safety Administration 23 CFR Parts 1200... 2127-AL29 Uniform Procedures for State Highway Safety Grant Programs AGENCY: National Highway Traffic... governing the implementation of State highway safety grant programs as amended by the Moving Ahead for...

Assessment of the safety-relevance of pedestrian and bicyclist programs. Volume 1, Conduct and results

DOT National Transportation Integrated Search

1983-04-01

This document (Volume One of a Two Volume Report) describes the development of a paper-and-pencil instrument for assessing the safety relevance of pedestrian and bicyclist safety education programs. The safety relevance of the program is the extent t...

The Savannah River Site`s groundwater monitoring program. First quarter 1991

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This report summarizes the Savannah River Site (SRS) groundwater monitoring program conducted by EPD/EMS in the first quarter of 1991. In includes the analytical data, field data, data review, quality control, and other documentation for this program, provides a record of the program`s activities and rationale, and serves as an official document of the analytical results.

Results of the U.S. Geological Survey's Analytical Evaluation Program for standard reference samples distributed in March 1999

USGS Publications Warehouse

Farrar, Jerry W.; Chleboun, Kimberly M.

1999-01-01

This report presents the results of the U.S. Geological Survey's analytical evaluation program for 8 standard reference samples -- T-157 (trace constituents), M-150 (major constituents), N-61 (nutrient constituents), N-62 (nutrient constituents), P-32 (low ionic strength constituents), GWT-5 (ground-water trace constituents), GWM- 4 (ground-water major constituents),and Hg-28 (mercury) -- that were distributed in March 1999 to 120 laboratories enrolled in the U.S. Geological Survey sponsored interlaboratory testing program. Analytical data that were received from 111 of the laboratories were evaluated with respect to overall laboratory performance and relative laboratory performance for each analyte in the seven reference samples. Results of these evaluations are presented in tabular form. Also presented are tables and graphs summarizing the analytical data provided by each laboratory for each analyte in the 8 standard reference samples. The most probable value for each analyte was determined using nonparametric statistics.

The dread factor: how hazards and safety training influence learning and performance.

PubMed

Burke, Michael J; Salvador, Rommel O; Smith-Crowe, Kristin; Chan-Serafin, Suzanne; Smith, Alexis; Sonesh, Shirley

2011-01-01

On the basis of hypotheses derived from social and experiential learning theories, we meta-analytically investigated how safety training and workplace hazards impact the development of safety knowledge and safety performance. The results were consistent with an expected interaction between the level of engagement of safety training and hazardous event/exposure severity in the promotion of safety knowledge and performance. For safety knowledge and safety performance, highly engaging training was considerably more effective than less engaging training when hazardous event/exposure severity was high, whereas highly and less engaging training had comparable levels of effectiveness when hazardous event/exposure severity was low. Implications of these findings for theory testing and incorporating information on objective risk into workplace safety research and practice are discussed.

USGS Laboratory Review Program Ensures Analytical Quality

USGS Publications Warehouse

Erdmann, David E.

1995-01-01

The USGS operates a review program for laboratories that analyze samples for USGS environmental investigations. This program has been effective in providing QA feedback to laboratories while ensuring that analytical data are consistent, of satisfactory quality, and meet the data objectives of the investigation.

An Overview of an Experimental Demonstration Aerotow Program

NASA Technical Reports Server (NTRS)

Murray, James E.; Bowers, Albion H.; Lokos, William A.; Peters, Todd L.; Gera, Joseph

1998-01-01

An overview of an experimental demonstration of aerotowing a delta-wing airplane with low-aspect ratio and relatively high wing loading is presented. Aerotowing of future space launch configurations is a new concept, and the objective of the work described herein is to demonstrate the aerotow operation using an airplane configuration similar to conceptual space launch vehicles. Background information on the use of aerotow for a space launch vehicle is presented, and the aerotow system used in this demonstration is described. The ground tests, analytical studies, and flight planning used to predict system behavior and to enhance flight safety are detailed. The instrumentation suite and flight test maneuvers flown are discussed, preliminary performance is assessed, and flight test results are compared with the preflight predictions.

Learning Analytics for Online Discussions: Embedded and Extracted Approaches

ERIC Educational Resources Information Center

Wise, Alyssa Friend; Zhao, Yuting; Hausknecht, Simone Nicole

2014-01-01

This paper describes an application of learning analytics that builds on an existing research program investigating how students contribute and attend to the messages of others in asynchronous online discussions. We first overview the E-Listening research program and then explain how this work was translated into analytics that students and…

Setting culture apart: distinguishing culture from behavior and social structure in safety and injury research.

PubMed

Myers, Douglas J; Nyce, James M; Dekker, Sidney W A

2014-07-01

The concept of culture is now widely used by those who conduct research on safety and work-related injury outcomes. We argue that as the term has been applied by an increasingly diverse set of disciplines, its scope has broadened beyond how it was defined and intended for use by sociologists and anthropologists. As a result, this more inclusive concept has lost some of its precision and analytic power. We suggest that the utility of this "new" understanding of culture could be improved if researchers more clearly delineated the ideological - the socially constructed abstract systems of meaning, norms, beliefs and values (which we refer to as culture) - from concrete behaviors, social relations and other properties of workplaces (e.g., organizational structures) and of society itself. This may help researchers investigate how culture and social structures can affect safety and injury outcomes with increased analytic rigor. In addition, maintaining an analytical distinction between culture and other social factors can help intervention efforts better understand the target of the intervention and therefore may improve chances of both scientific and instrumental success. Copyright © 2013 Elsevier Ltd. All rights reserved.

Parametric Modeling of the Safety Effects of NextGen Terminal Maneuvering Area Conflict Scenarios

NASA Technical Reports Server (NTRS)

Rogers, William H.; Waldron, Timothy P.; Stroiney, Steven R.

2011-01-01

The goal of this work was to analytically identify and quantify the issues, challenges, technical hurdles, and pilot-vehicle interface issues associated with conflict detection and resolution (CD&R)in emerging operational concepts for a NextGen terminal aneuvering area, including surface operations. To this end, the work entailed analytical and trade studies focused on modeling the achievable safety benefits of different CD&R strategies and concepts in the current and future airport environment. In addition, crew-vehicle interface and pilot performance enhancements and potential issues were analyzed based on review of envisioned NextGen operations, expected equipage advances, and human factors expertise. The results of perturbation analysis, which quantify the high-level performance impact of changes to key parameters such as median response time and surveillance position error, show that the analytical model developed could be useful in making technology investment decisions.

Destructive analysis capabilities for plutonium and uranium characterization at Los Alamos National Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tandon, Lav; Kuhn, Kevin J; Drake, Lawrence R

Los Alamos National Laboratory's (LANL) Actinide Analytical Chemistry (AAC) group has been in existence since the Manhattan Project. It maintains a complete set of analytical capabilities for performing complete characterization (elemental assay, isotopic, metallic and non metallic trace impurities) of uranium and plutonium samples in different forms. For a majority of the customers there are strong quality assurance (QA) and quality control (QC) objectives including highest accuracy and precision with well defined uncertainties associated with the analytical results. Los Alamos participates in various international and national programs such as the Plutonium Metal Exchange Program, New Brunswick Laboratory's (NBL' s) Safeguardsmore » Measurement Evaluation Program (SME) and several other inter-laboratory round robin exercises to monitor and evaluate the data quality generated by AAC. These programs also provide independent verification of analytical measurement capabilities, and allow any technical problems with analytical measurements to be identified and corrected. This presentation will focus on key analytical capabilities for destructive analysis in AAC and also comparative data between LANL and peer groups for Pu assay and isotopic analysis.« less

Safety management vs. picking leaves.

PubMed

Wright, D

1991-09-01

A safety program will generally have as its base a comprehensive written document made available for everyone in the organization. The document should indicate a positive commitment to safety by management. It should not be a "how to" guide, but rather a broad outline to establish responsibilities, goals, and methods. The safety manager is appointed in writing and answers to the highest level of management. As opposed to a "doer," the safety manager acts as a director and administrator of the safety program. This is accomplished through the advisory capacity of the safety program for solicited and unsolicited problems. The focus of the safety manager is on the system and how it contributes to safety problems, rather than individual problems. Management has the ultimate responsibility for safety. Their efforts should reflect a proactive attitude to correct problems in the system. In order to identify areas of interest, technically competent input from the safety manager should be required. The support of the safety program by top management determines the success of the program. Without a clear and firm commitment by the organization, safety will receive no more than lip service from the employees. The benefits of a proactive approach will be realized in the organization's ability to manage safety issues, rather than reacting to them.

Analytical Chemistry Division. Annual progress report for period ending December 31, 1980

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lyon, W.S.

1981-05-01

This report is divided into: analytical methodology; mass and emission spectrometry; technical support; bio/organic analysis; nuclear and radiochemical analysis; quality assurance, safety, and tabulation of analyses; supplementary activities; and presentation of research results. Separate abstracts were prepared for the technical support, bio/organic analysis, and nuclear and radiochemical analysis. (DLC)

49 CFR 659.15 - System safety program standard.

Code of Federal Regulations, 2011 CFR

2011-10-01

... included in the affected rail transit agency's system safety program plan relating to the hazard management... 49 Transportation 7 2011-10-01 2011-10-01 false System safety program standard. 659.15 Section 659... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the...

Analysis of School Food Safety Programs Based on HACCP Principles

ERIC Educational Resources Information Center

Roberts, Kevin R.; Sauer, Kevin; Sneed, Jeannie; Kwon, Junehee; Olds, David; Cole, Kerri; Shanklin, Carol

2014-01-01

Purpose/Objectives: The purpose of this study was to determine how school districts have implemented food safety programs based on HACCP principles. Specific objectives included: (1) Evaluate how schools are implementing components of food safety programs; and (2) Determine foodservice employees food-handling practices related to food safety.…

23 CFR Appendix B to Part 1200 - HIGHWAY SAFETY PROGRAM COST SUMMARY (HS-217)

Code of Federal Regulations, 2013 CFR

2013-04-01

... 23 Highways 1 2013-04-01 2013-04-01 false HIGHWAY SAFETY PROGRAM COST SUMMARY (HS-217) B APPENDIX B TO PART 1200 Highways NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION AND FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURES FOR STATE HIGHWAY SAFETY PROGRAMS UNIFORM PROCEDURES FOR...

23 CFR Appendix B to Part 1200 - Highway Safety Program Cost Summary (HS-217)

Code of Federal Regulations, 2014 CFR

2014-04-01

... 23 Highways 1 2014-04-01 2014-04-01 false Highway Safety Program Cost Summary (HS-217) B Appendix B to Part 1200 Highways NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION AND FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURES FOR STATE HIGHWAY SAFETY PROGRAMS UNIFORM PROCEDURES FOR...

Directory of Academic Programs in Occupational Safety and Health.

ERIC Educational Resources Information Center

Weis, William J., III; And Others

This booklet describes academic program offerings in American colleges and universities in the area of occupational safety and health. Programs are divided into five major categories, corresponding to each of the core disciplines: (1) occupational safety and health/industrial hygiene, (2) occupational safety, (3) industrial hygiene, (4)…

A survey of residents' experience with patient safety and quality improvement concepts in radiation oncology.

PubMed

Spraker, Matthew B; Nyflot, Matthew; Hendrickson, Kristi; Ford, Eric; Kane, Gabrielle; Zeng, Jing

The safety and quality of radiation therapy have recently garnered increased attention in radiation oncology (RO). Although patient safety guidelines expect physicians and physicists to lead clinical safety and quality improvement (QI) programs, trainees' level of exposure to patient safety concepts during training is unknown. We surveyed active medical and physics RO residents in North America in February 2016. Survey questions involved demographics and program characteristics, exposure to patient safety topics, and residents' attitude regarding their safety education. Responses were collected from 139 of 690 (20%) medical and 56 of 248 (23%) physics RO residents. More than 60% of residents had no exposure or only informal exposure to incident learning systems (ILS), root cause analysis, failure mode and effects analysis (FMEA), and the concepts of human factors engineering. Medical residents had less exposure to FMEA than physics residents, and fewer medical than physics residents felt confident in leading FMEA in clinic. Only 27% of residents felt that patient safety training was adequate in their program. Experiential learning through practical workshops was the most desired educational modality, preferred over web-based learning. Residents training in departments with ILS had greater exposure to patient safety concepts and felt more confident leading clinical patient safety and QI programs than residents training in departments without an ILS. The survey results show that most residents have no or only informal exposure to important patient safety and QI concepts and do not feel confident leading clinical safety programs. This represents a gaping need in RO resident education. Educational programs such as these can be naturally developed as part of an incident learning program that focuses on near-miss events. Future research should assess the needs of RO program directors to develop effective RO patient safety and QI training programs. Copyright © 2016 American Society of Radiation Oncology. Published by Elsevier Inc. All rights reserved.

Findings From the National Machine Guarding Program-A Small Business Intervention: Machine Safety.

PubMed

Parker, David L; Yamin, Samuel C; Xi, Min; Brosseau, Lisa M; Gordon, Robert; Most, Ivan G; Stanley, Rodney

2016-09-01

The purpose of this nationwide intervention was to improve machine safety in small metal fabrication businesses (3 to 150 employees). The failure to implement machine safety programs related to guarding and lockout/tagout (LOTO) are frequent causes of Occupational Safety and Health Administration (OSHA) citations and may result in serious traumatic injury. Insurance safety consultants conducted a standardized evaluation of machine guarding, safety programs, and LOTO. Businesses received a baseline evaluation, two intervention visits, and a 12-month follow-up evaluation. The intervention was completed by 160 businesses. Adding a safety committee was associated with a 10% point increase in business-level machine scores (P < 0.0001) and a 33% point increase in LOTO program scores (P < 0.0001). Insurance safety consultants proved effective at disseminating a machine safety and LOTO intervention via management-employee safety committees.

Quantitative analysis of Sudan dye adulteration in paprika powder using FTIR spectroscopy

USDA-ARS?s Scientific Manuscript database

The presence of Sudan dye used illegally for coloring in food stuffs has become a point of food safety concern, especially in paprika- and chili-containing food products. Fourier transform infrared (FTIR) spectroscopy has been extensively used as an analytical method for quality control and safety m...

Medication safety programs in primary care: a scoping review.

PubMed

Khalil, Hanan; Shahid, Monica; Roughead, Libby

2017-10-01

Medication safety plays an essential role in all healthcare organizations; improving this area is paramount to quality and safety of any wider healthcare program. While several medication safety programs in the hospital setting have been described and the associated impact on patient safety evaluated, no systematic reviews have described the impact of medication safety programs in the primary care setting. A preliminary search of the literature demonstrated that no systematic reviews, meta-analysis or scoping reviews have reported on medication safety programs in primary care; instead they have focused on specific interventions such as medication reconciliation or computerized physician order entry. This scoping review sought to map the current medication safety programs used in primary care. The current scoping review sought to examine the characteristics of medication safety programs in the primary care setting and to map evidence on the outcome measures used to assess the effectiveness of medication safety programs in improving patient safety. The current review considered participants of any age and any condition using care obtained from any primary care services. We considered studies that focussed on the characteristics of medication safety programs and the outcome measures used to measure the effectiveness of these programs on patient safety in the primary care setting. The context of this review was primary care settings, primary healthcare organizations, general practitioner clinics, outpatient clinics and any other clinics that do not classify patients as inpatients. We considered all quantitative studied published in English. A three-step search strategy was utilized in this review. Data were extracted from the included studies to address the review question. The data extracted included type of medication safety program, author, country of origin, aims and purpose of the study, study population, method, comparator, context, main findings and outcome measures. The objectives, inclusion criteria and methods for this scoping review were specified in advance and documented in a protocol that was previously published. This scoping review included nine studies published over an eight-year period that investigated or described the effects of medication safety programs in primary care settings. We classified each of the nine included studies into three main sections according to whether they included an organizational, professional or patient component. The organizational component is aimed at changing the structure of the organization to implement the intervention, the professional component is aimed at the healthcare professionals involved in implementing the interventions, and the patient component is aimed at counseling and education of the patient. All of the included studies had different types of medication safety programs. The programs ranged from complex interventions including pharmacists and teams of healthcare professionals to educational packages for patients and computerized system interventions. The outcome measures described in the included studies were medication error incidence, adverse events and number of drug-related problems. Multi-faceted medication safety programs are likely to vary in characteristics. They include educational training, quality improvement tools, informatics, patient education and feedback provision. The most likely outcome measure for these programs is the incidence of medication errors and reported adverse events or drug-related problems.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Green, D.W.; Heinrich, R.R.; Graczyk, D.G.

The purpose of this report is to summarize the activities of the Analytical Chemistry Laboratory (ACL) at Argonne National Laboratory (ANL) for fiscal year 1988 (October 1987 through September 1988). The Analytical Chemistry Laboratory is a full-cost recovery service center, with the primary mission of providing a broad range of analytical chemistry support services to the scientific and engineering programs at ANL. In addition, the ACL conducts a research program in analytical chemistry, works on instrumental and methods development, and provides analytical services for governmental, educational, and industrial organizations. The ACL handles a wide range of analytical problems, from routinemore » standard analyses to unique problems that require significant development of methods and techniques.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Green, D.W.; Heinrich, R.R.; Graczyk, D.G.

The purpose of this report is to summarize the activities of the Analytical Chemistry Laboratory (ACL) at Argonne National Laboratory (ANL) for Fiscal Year 1989 (October 1988 through September 1989). The Analytical Chemistry Laboratory is a full-cost-recovery service center, with the primary mission of providing a broad range of analytical chemistry support services to the scientific and engineering programs at ANL. In addition, the ACL conducts a research program in analytical chemistry, works on instrumental and methods development, and provides analytical services for governmental, educational, and industrial organizations. The ACL handles a wide range of analytical problems, from routine standardmore » analyses to unique problems that require significant development of methods and techniques.« less

The Department of Energy Nuclear Criticality Safety Program

NASA Astrophysics Data System (ADS)

Felty, James R.

2005-05-01

This paper broadly covers key events and activities from which the Department of Energy Nuclear Criticality Safety Program (NCSP) evolved. The NCSP maintains fundamental infrastructure that supports operational criticality safety programs. This infrastructure includes continued development and maintenance of key calculational tools, differential and integral data measurements, benchmark compilation, development of training resources, hands-on training, and web-based systems to enhance information preservation and dissemination. The NCSP was initiated in response to Defense Nuclear Facilities Safety Board Recommendation 97-2, Criticality Safety, and evolved from a predecessor program, the Nuclear Criticality Predictability Program, that was initiated in response to Defense Nuclear Facilities Safety Board Recommendation 93-2, The Need for Critical Experiment Capability. This paper also discusses the role Dr. Sol Pearlstein played in helping the Department of Energy lay the foundation for a robust and enduring criticality safety infrastructure.

Fusion Safety Program annual report, fiscal year 1994

NASA Astrophysics Data System (ADS)

Longhurst, Glen R.; Cadwallader, Lee C.; Dolan, Thomas J.; Herring, J. Stephen; McCarthy, Kathryn A.; Merrill, Brad J.; Motloch, Chester C.; Petti, David A.

1995-03-01

This report summarizes the major activities of the Fusion Safety Program in fiscal year 1994. The Idaho National Engineering Laboratory (INEL) is the designated lead laboratory and Lockheed Idaho Technologies Company is the prime contractor for this program. The Fusion Safety Program was initiated in 1979. Activities are conducted at the INEL, at other DOE laboratories, and at other institutions, including the University of Wisconsin. The technical areas covered in this report include tritium safety, beryllium safety, chemical reactions and activation product release, safety aspects of fusion magnet systems, plasma disruptions, risk assessment failure rate data base development, and thermalhydraulics code development and their application to fusion safety issues. Much of this work has been done in support of the International Thermonuclear Experimental Reactor (ITER). Also included in the report are summaries of the safety and environmental studies performed by the Fusion Safety Program for the Tokamak Physics Experiment and the Tokamak Fusion Test Reactor and of the technical support for commercial fusion facility conceptual design studies. A major activity this year has been work to develop a DOE Technical Standard for the safety of fusion test facilities.

NCRP Program Area Committee 2: Operational Radiation Safety

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pryor, Kathryn H.; Goldin, Eric M.

2016-02-29

Program Area Committee 2 of the National Council on Radiation Protection and Measurements provides guidance for radiation safety in occupational settings in a variety of industries and activities. The committee completed three reports in recent years covering recommendations for the development and administration of radiation safety programs for smaller educational institutions, requirements for self-assessment programs that improve radiation safety and identify and correct deficiencies, and a comprehensive process for effective investigation of radiological incidents. Ongoing work includes a report on sealed radioactive source controls and oversight of a report on radioactive nanomaterials focusing on gaps within current radiation safety programs.more » Future efforts may deal with operational radiation safety programs in fields such as the safe use of handheld and portable X-Ray fluorescence analyzers, occupational airborne radioactive contamination, unsealed radioactive sources, or industrial accelerators.« less

75 FR 73946 - Worker Safety and Health Program: Safety Conscious Work Environment

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-30

... DEPARTMENT OF ENERGY 10 CFR Part 851 Worker Safety and Health Program: Safety Conscious Work... Nuclear Regulatory Commission's ``Safety-Conscious Work Environment'' guidelines as a model. DOE published.... Second, not only would instituting a ``Safety-Conscious Work Environment'' by regulation be redundant...

A Meta-Analytic Review of Components Associated with Parent Training Program Effectiveness

ERIC Educational Resources Information Center

Kaminski, Jennifer Wyatt; Valle, Linda Anne; Filene, Jill H.; Boyle, Cynthia L.

2008-01-01

This component analysis used meta-analytic techniques to synthesize the results of 77 published evaluations of parent training programs (i.e., programs that included the active acquisition of parenting skills) to enhance behavior and adjustment in children aged 0-7. Characteristics of program content and delivery method were used to predict effect…

The Savannah River Site's groundwater monitoring program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This report summarizes the Savannah River Site (SRS) groundwater monitoring program conducted by EPD/EMS in the first quarter of 1991. In includes the analytical data, field data, data review, quality control, and other documentation for this program, provides a record of the program's activities and rationale, and serves as an official document of the analytical results.

School-Based Mental Health and Behavioral Programs for Low-Income, Urban Youth: A Systematic and Meta-Analytic Review

ERIC Educational Resources Information Center

Farahmand, Farahnaz K.; Grant, Kathryn E.; Polo, Antonio J.; Duffy, Sophia N.; Dubois, David L.

2011-01-01

A systematic and meta-analytic review was conducted of the effectiveness of school-based mental health and behavioral programs for low-income, urban youth. Applying criteria from an earlier systematic review (Rones & Hoagwood, 2000) of such programs for all populations indicated substantially fewer effective programs for low-income, urban…

Design Evaluation of Wind Turbine Spline Couplings Using an Analytical Model: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guo, Y.; Keller, J.; Wallen, R.

2015-02-01

Articulated splines are commonly used in the planetary stage of wind turbine gearboxes for transmitting the driving torque and improving load sharing. Direct measurement of spline loads and performance is extremely challenging because of limited accessibility. This paper presents an analytical model for the analysis of articulated spline coupling designs. For a given torque and shaft misalignment, this analytical model quickly yields insights into relationships between the spline design parameters and resulting loads; bending, contact, and shear stresses; and safety factors considering various heat treatment methods. Comparisons of this analytical model against previously published computational approaches are also presented.

10 CFR 851.10 - General requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... accordance with: (i) All applicable requirements of this part; and (ii) With the worker safety and health program for that workplace. (b) The written worker safety and health program must describe how the... DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Program Requirements § 851.10 General requirements. (a...

10 CFR 851.10 - General requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... accordance with: (i) All applicable requirements of this part; and (ii) With the worker safety and health program for that workplace. (b) The written worker safety and health program must describe how the... DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Program Requirements § 851.10 General requirements. (a...

Biosimilars: Here and Now.

PubMed

Lemery, Steven J; Esteva, Francisco J; Weise, Martina

2016-01-01

Congress passed the Biologics Price Competition and Innovation Act (BPCI Act) as part of the Affordable Care Act on March 23, 2010. The BPCI Act authorized an approval pathway for biosimilar and interchangeable products. It defines biosimilarity to mean "that the biological product is highly similar to the reference product notwithstanding minor differences in clinically inactive components" and that "there are no clinically meaningful differences between the biological product and the reference product in terms of safety, purity, and potency of the product." The biosimilar pathway has the potential to facilitate access to biologic products through increased competition, in the same manner as biosimilars have done for almost 10 years in Europe. The goal of a biosimilar program is not to independently establish safety and effectiveness for each condition of use. Rather, the goal is to demonstrate biosimilarity through an extensive analytical characterization and a targeted clinical program designed to assess for clinically meaningful differences, if they exist. The regulatory approaches in both the United States and Europe involve a totality-of-the-evidence approach to demonstrate biosimilarity. Importantly, the biosimilar pathway allows for extrapolation of data across indications so that a sponsor, with adequate scientific justification, need not conduct clinical studies in each intended condition of use. Without extrapolation, development may not be feasible for many products, and patients and resources could be diverted from clinical studies of newer agents for cancer.

Highway Safety Program Manual: Volume 12: Highway Design, Construction and Maintenance.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 12 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) focuses on highway design, construction and maintenance. The purpose and specific objectives of such a program are described. Federal authority in the area of highway safety and policies regarding…

Progress Report for Student Research: Fire Safety Skills for Mentally Retarded Children.

ERIC Educational Resources Information Center

Hayden, Mary F.; Lefcowitz, M. Jack

A comprehensive fire safety skills program was evaluated with 32 moderately to mildly retarded adolescents. The program used a fire safety program manual and lessons in basic preventive fire skills, fire safety procedures, and fire escape skills. Across-group comparisons indicated differences in performance between males and females. Fire safety…

Occupational Safety and Health Programs in Career Education.

ERIC Educational Resources Information Center

DiCarlo, Robert D.; And Others

This resource guide was developed in response to the Occupational Safety and Health Act of 1970 and is intended to assist teachers in implementing courses in occupational safety and health as part of a career education program. The material is a synthesis of films, programed instruction, slides and narration, case studies, safety pamphlets,…

78 FR 54510 - New Entrant Safety Assurance Program Operational Test

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-04

...-0298] New Entrant Safety Assurance Program Operational Test AGENCY: Federal Motor Carrier Safety...) announces an operational test of procedural changes to the New Entrant Safety Assurance Program. The operational test began in July 2013 and will be in effect for up to 12 months. It is applicable to new entrant...

Highway Safety Program Manual: Volume 15: Police Traffic Services.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 15 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) focuses on police traffic services. The purpose and objectives of a police services program are described. Federal authority in the areas of highway safety and policies regarding a police traffic…

Highway Safety Program Manual: Volume 6: Codes and Laws.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 6 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred safety practices) concentrates on codes and laws. The purpose and specific objectives of the Codes and Laws Program, Federal authority in the area of highway safety, and policies regarding traffic regulation are described.…

State funding of alcohol safety countermeasure programs

DOT National Transportation Integrated Search

1979-09-01

This study was to analyze current State practices in funding State alcohol highway safety programs. The results were intended to provide guidelines for establishing and improving self-sustaining alcohol safety programs. The literature was reviewed an...

Official Methods for the Determination of Minerals and Trace Elements in Infant Formula and Milk Products: A Review.

PubMed

Poitevin, Eric

2016-01-01

The minerals and trace elements that account for about 4% of total human body mass serve as materials and regulators in numerous biological activities in body structure building. Infant formula and milk products are important sources of endogenic and added minerals and trace elements and hence, must comply with regulatory as well as nutritional and safety requirements. In addition, reliable analytical data are necessary to support product content and innovation, health claims, or declaration and specific safety issues. Adequate analytical platforms and methods must be implemented to demonstrate both the compliance and safety assessment of all declared and regulated minerals and trace elements, especially trace-element contaminant surveillance. The first part of this paper presents general information on the mineral composition of infant formula and milk products and their regulatory status. In the second part, a survey describes the main techniques and related current official methods determining minerals and trace elements in infant formula and milk products applied for by various international organizations (AOAC INTERNATIONAL, the International Organization for Standardization, the International Dairy Federation, and the European Committe for Standardization). The third part summarizes method officialization activities by Stakeholder Panels on Infant Formula and Adult Nutritionals and Stakeholder Panel on Strategic Food Analytical Methods. The final part covers a general discussion focusing on analytical gaps and future trends in inorganic analysis that have been applied for in infant formula and milk-based products.

APMS: An Integrated Suite of Tools for Measuring Performance and Safety

NASA Technical Reports Server (NTRS)

Statler, Irving C.; Lynch, Robert E.; Connors, Mary M. (Technical Monitor)

1997-01-01

This is a report of work in progress. In it, I summarize the status of the research and development of the Aviation Performance Measuring System (APMS) for managing, processing, and analyzing digital flight-recorded data. The objectives of the NASA-FAA APMS research project are to establish a sound scientific and technological basis for flight-data analysis, to define an open and flexible architecture for flight-data-analysis systems, and to articulate guidelines for a standardized database structure on which to continue to build future flight-data-analysis extensions. APMS will offer to the air transport community an open, voluntary standard for flight-data-analysis software, a standard that will help to ensure suitable functionality, and data interchangeability, among competing software programs. APMS will develop and document the methodologies, algorithms, and procedures for data management and analyses to enable users to easily interpret the implications regarding safety and efficiency of operations. APMS does not entail the implementation of a nationwide flight-data-collection system. It is intended to provide technical tools to ease the large-scale implementation of flight-data analyses at both the air-carrier and the national-airspace levels in support of their Flight Operations and Quality Assurance (FOQA) Programs and Advanced Qualifications Programs (AQP). APMS cannot meet its objectives unless it develops tools that go substantially beyond the capabilities of the current commercially available software and supporting analytic methods that are mainly designed to count special events. These existing capabilities, while of proven value, were created primarily with the needs of air crews in mind. APMS tools must serve the needs of the government and air carriers, as well as air crews, to fully support the FOQA and AQP programs. They must be able to derive knowledge not only through the analysis of single flights (special-event detection), but through statistical evaluation of the performance of large groups of flights. This paper describes the integrated suite of tools that will assist analysts in evaluating the operational performance and safety of the national air transport system, the air carrier, and the air crew.

The Aviation Performance Measuring System (APMS): An Integrated Suite of Tools for Measuring Performance and Safety

NASA Technical Reports Server (NTRS)

Statler, Irving C.; Connor, Mary M. (Technical Monitor)

1998-01-01

This is a report of work in progress. In it, I summarize the status of the research and development of the Aviation Performance Measuring System (APMS) for managing, processing, and analyzing digital flight-recorded data, The objectives of the NASA-FAA APMS research project are to establish a sound scientific and technological basis for flight-data analysis, to define an open and flexible architecture for flight-data analysis systems, and to articulate guidelines for a standardized database structure on which to continue to build future flight-data-analysis extensions. APMS offers to the air transport community an open, voluntary standard for flight-data-analysis software; a standard that will help to ensure suitable functionality and data interchangeability among competing software programs. APMS will develop and document the methodologies, algorithms, and procedures for data management and analyses to enable users to easily interpret the implications regarding safety and efficiency of operations. APMS does not entail the implementation of a nationwide flight-data-collection system. It is intended to provide technical tools to ease the large-scale implementation of flight-data analyses at both the air-carrier and the national-airspace levels in support of their Flight Operations and Quality Assurance (FOQA) Programs and Advanced Qualifications Programs (AQP). APMS cannot meet its objectives unless it develops tools that go substantially beyond the capabilities of the current commercially available software and supporting analytic methods that are mainly designed to count special events. These existing capabilities, while of proven value, were created primarily with the needs-of aircrews in mind. APMS tools must serve the needs of the government and air carriers, as well as aircrews, to fully support the FOQA and AQP programs. They must be able to derive knowledge not only through the analysis of single flights (special-event detection), but also through statistical evaluation of the performance of large groups of flights. This paper describes the integrated suite of tools that will assist analysts in evaluating the operational performance and safety of the national air transport system, the air carrier, and the aircrew.

APMS: An Integrated Suite of Tools for Measuring Performance and Safety

NASA Technical Reports Server (NTRS)

Statler, Irving C. (Technical Monitor)

1997-01-01

This is a report of work in progress. In it, I summarize the status of the research and development of the Aviation Performance Measuring System (APMS) for managing, processing, and analyzing digital flight-recorded data. The objectives of the NASA-FAA APMS research project are to establish a sound scientific and technological basis for flight-data analysis, to define an open and flexible architecture for flight-data-analysis systems, and to articulate guidelines for a standardized database structure on which to continue to build future flight-data-analysis extensions . APMS will offer to the air transport community an open, voluntary standard for flight-data-analysis software, a standard that will help to ensure suitable functionality, and data interchangeability, among competing software programs. APMS will develop and document the methodologies, algorithms, and procedures for data management and analyses to enable users to easily interpret the implications regarding safety and efficiency of operations. APMS does not entail the implementation of a nationwide flight-data-collection system. It is intended to provide technical tools to ease the large-scale implementation of flight-data analyses at both the air-carrier and the national-airspace levels in support of their Flight Operations and Quality Assurance (FOQA) Programs and Advanced Qualifications Programs (AQP). APMS cannot meet its objectives unless it develops tools that go substantially beyond the capabilities of the current commercially available software and supporting analytic methods that are mainly designed to count special events. These existing capabilities, while of proven value, were created primarily with the needs of air crews in mind. APMS tools must serve the needs of the government and air carriers, as well as air crews, to fully support the FOQA and AQP programs. They must be able to derive knowledge not only through the analysis of single flights (special-event detection), but through statistical evaluation of the performance of large groups of flights. This paper describes the integrated suite of tools that will assist analysts in evaluating the operational performance and safety of the national air transport system, the air carrier, and the air crew.

APMS: An Integrated Set of Tools for Measuring Safety

NASA Technical Reports Server (NTRS)

Statler, Irving C.; Reynard, William D. (Technical Monitor)

1996-01-01

This is a report of work in progress. In it, I summarize the status of the research and development of the Aviation Performance Measuring System (APMS) for managing, processing, and analyzing digital flight-recorded data. The objectives of the NASA-FAA APMS research project are to establish a sound scientific and technological basis for flight-data analysis, to define an open and flexible architecture for flight-data-analysis systems, and to articulate guidelines for a standardized database structure on which to continue to build future flight-data-analysis extensions. APMS will offer to the air transport community an open, voluntary standard for flight-data-analysis software, a standard that will help to ensure suitable functionality, and data interchangeability, among competing software programs. APMS will develop and document the methodologies, algorithms, and procedures for data management and analyses to enable users to easily interpret the implications regarding safety and efficiency of operations. APMS does not entail the implementation of a nationwide flight-data-collection system. It is intended to provide technical tools to ease the large-scale implementation of flight-data analyses at both the air-carrier and the national-airspace levels in support of their Flight Operations and Quality Assurance (FOQA) Programs and Advanced Qualifications Programs (AQP). APMS cannot meet its objectives unless it develops tools that go substantially beyond the capabilities of the current commercially available software and supporting analytic methods that are mainly designed to count special events. These existing capabilities, while of proven value, were created primarily with the needs of air crews in mind. APMS tools must serve the needs of the government and air carriers, as well as air crews, to fully support the FOQA and AQP programs. They must be able to derive knowledge not only through the analysis of single flights (special-event detection), but through statistical evaluation of the performance of large groups of flights. This paper describes the integrated suite of tools that will assist analysts in evaluating the operational performance and safety of the national air transport system, the air carrier, and the air crew.

Railway safety climate: a study on organizational development.

PubMed

Cheng, Yung-Hsiang

2017-09-07

The safety climate of an organization is considered a leading indicator of potential risk for railway organizations. This study adopts the perceptual measurement-individual attribute approach to investigate the safety climate of a railway organization. The railway safety climate attributes are evaluated from the perspective of railway system staff. We identify four safety climate dimensions from exploratory factor analysis, namely safety communication, safety training, safety management and subjectively evaluated safety performance. Analytical results indicate that the safety climate differs at vertical and horizontal organizational levels. This study contributes to the literature by providing empirical evidence of the multilevel safety climate in a railway organization, presents possible causes of the differences under various cultural contexts and differentiates between safety climate scales for diverse workgroups within the railway organization. This information can be used to improve the safety sustainability of railway organizations and to conduct safety supervisions for the government.

Experimental and analytical tools for evaluation of Stirling engine rod seal behavior

NASA Technical Reports Server (NTRS)

Krauter, A. I.; Cheng, H. S.

1979-01-01

The first year of a two year experimental and analytical program is reported. The program is directed at the elastohydrodynamic behavior of sliding elastomeric rod seals for the Stirling engine. During the year, experimental and analytical tools were developed for evaluating seal leakage, seal friction, and the fluid film thickness at the seal/cylinder interface.

EXPERIMENTAL AND ANALYTICAL STUDIES OF REFLECTRO CONTROL FOR THE ADVANCED ENGINEERING TEST REACTOR. PART A. EXPERIMENTAL STUDIES WITH THE REFLECTOR CONTROL SYSTEM MODEL. PART B. ANALYTICAL STUDIES OF REFLECTOR CONTROL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bertelson, P.C.; Francis, T.L.

1959-10-21

Studies of reflector control for the Advanced Engineering Test Reactor were made. The performance of various parts of the reflector control system model such as the safety reflector and the water jet educator, boric acid injection, and demineralizer systems is discussed. The experimental methods and results obtained are discussed. Four reflector control schemes were studied. The schemes were a single-region and three-region reflector schemes two separate reflectors, and two connected reflectors. Calculations were made of shim and safety reflector worth for a variety of parameters. Safety reflector thickness was varied from 7.75 to 0 inches, with and without boron. Boricmore » acid concentration was varied from 100 to 2% of saturation in the shim reflectors. Neutron flux plots are presented (C.J.G.)« less

Laboratory errors and patient safety.

PubMed

Miligy, Dawlat A

2015-01-01

Laboratory data are extensively used in medical practice; consequently, laboratory errors have a tremendous impact on patient safety. Therefore, programs designed to identify and reduce laboratory errors, as well as, setting specific strategies are required to minimize these errors and improve patient safety. The purpose of this paper is to identify part of the commonly encountered laboratory errors throughout our practice in laboratory work, their hazards on patient health care and some measures and recommendations to minimize or to eliminate these errors. Recording the encountered laboratory errors during May 2008 and their statistical evaluation (using simple percent distribution) have been done in the department of laboratory of one of the private hospitals in Egypt. Errors have been classified according to the laboratory phases and according to their implication on patient health. Data obtained out of 1,600 testing procedure revealed that the total number of encountered errors is 14 tests (0.87 percent of total testing procedures). Most of the encountered errors lay in the pre- and post-analytic phases of testing cycle (representing 35.7 and 50 percent, respectively, of total errors). While the number of test errors encountered in the analytic phase represented only 14.3 percent of total errors. About 85.7 percent of total errors were of non-significant implication on patients health being detected before test reports have been submitted to the patients. On the other hand, the number of test errors that have been already submitted to patients and reach the physician represented 14.3 percent of total errors. Only 7.1 percent of the errors could have an impact on patient diagnosis. The findings of this study were concomitant with those published from the USA and other countries. This proves that laboratory problems are universal and need general standardization and bench marking measures. Original being the first data published from Arabic countries that evaluated the encountered laboratory errors and launch the great need for universal standardization and bench marking measures to control the laboratory work.

49 CFR 237.31 - Adoption of bridge management programs.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Adoption of bridge management programs. 237.31... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION BRIDGE SAFETY STANDARDS Railroad Bridge Safety Assurance § 237.31 Adoption of bridge management programs. Each track owner shall adopt a bridge safety management program to...

30 CFR 75.1702-1 - Smoking programs.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Smoking programs. 75.1702-1 Section 75.1702-1 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Miscellaneous § 75.1702-1 Smoking programs. Programs...

30 CFR 75.1702-1 - Smoking programs.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Smoking programs. 75.1702-1 Section 75.1702-1 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Miscellaneous § 75.1702-1 Smoking programs. Programs...

30 CFR 75.1702-1 - Smoking programs.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Smoking programs. 75.1702-1 Section 75.1702-1 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Miscellaneous § 75.1702-1 Smoking programs. Programs...

30 CFR 75.1702-1 - Smoking programs.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Smoking programs. 75.1702-1 Section 75.1702-1 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Miscellaneous § 75.1702-1 Smoking programs. Programs...

30 CFR 75.1702-1 - Smoking programs.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Smoking programs. 75.1702-1 Section 75.1702-1 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Miscellaneous § 75.1702-1 Smoking programs. Programs...

49 CFR 237.31 - Adoption of bridge management programs.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Adoption of bridge management programs. 237.31... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION BRIDGE SAFETY STANDARDS Railroad Bridge Safety Assurance § 237.31 Adoption of bridge management programs. Each track owner shall adopt a bridge safety management program to...

Distribution of persistent organic pollutants (POPS) IN wild Bluefin tuna (Thunnus thynnus) from different FAO capture zones.

PubMed

Chiesa, L M; Labella, G F; Panseri, S; Pavlovic, R; Bonacci, S; Arioli, F

2016-06-01

Residues of environmental contaminants in food represent a concern in food safety programs. In this study, the distribution of persistent organic pollutants (POPs) were evaluated in 79 tuna samples from FAO areas 51 (Indian Ocean), 71 (Pacific Ocean), 34 (Atlantic Ocean), and 37 (Mediterranean Sea). 6 polychlorinated biphenyls (PCBs), 16 organochlorines (OCs) and 7 polybrominated biphenyl ethers (PBDEs) were selected as representative compounds according to EFSA POPs monitoring guidelines. An analytical method, based on Accelerated Solvent Extraction (ASE), with an "in-line" clean-up step and GC-MS/MS detection, was developed, validated and applied. PCBs were detected in all FAO areas, with a prevalence of 100% for most of them. In the FAO area 37, only, all PBDEs were detected. Only 5 OCs were detected. The results showed that POPs contamination of tuna reflects FAO area contamination; in particular FAO area 37 was the most polluted. Moreover, tuna muscle was an appropriate matrix for monitoring contamination and for obtaining information about food safety. Copyright © 2016 Elsevier Ltd. All rights reserved.

Methods for structural design at elevated temperatures

NASA Technical Reports Server (NTRS)

Ellison, A. M.; Jones, W. E., Jr.; Leimbach, K. R.

1973-01-01

A procedure which can be used to design elevated temperature structures is discussed. The desired goal is to have the same confidence in the structural integrity at elevated temperature as the factor of safety gives on mechanical loads at room temperature. Methods of design and analysis for creep, creep rupture, and creep buckling are presented. Example problems are included to illustrate the analytical methods. Creep data for some common structural materials are presented. Appendix B is description, user's manual, and listing for the creep analysis program. The program predicts time to a given creep or to creep rupture for a material subjected to a specified stress-temperature-time spectrum. Fatigue at elevated temperature is discussed. Methods of analysis for high stress-low cycle fatigue, fatigue below the creep range, and fatigue in the creep range are included. The interaction of thermal fatigue and mechanical loads is considered, and a detailed approach to fatigue analysis is given for structures operating below the creep range.

Precision and bias of selected analytes reported by the National Atmospheric Deposition Program and National Trends Network, 1983; and January 1980 through September 1984

USGS Publications Warehouse

Schroder, L.J.; Bricker, A.W.; Willoughby, T.C.

1985-01-01

Blind-audit samples with known analyte concentrations have been prepared by the U.S. Geological Survey and distributed to the National Atmospheric Deposition Program 's Central Analytical Laboratory. The difference between the National Atmospheric Deposition Program and National Trends Network reported analyte concentrations and known analyte concentrations have been calculated, and the bias has been determined. Calcium, magnesium , sodium, and chloride were biased at the 99-percent confidence limit; potassium and sulfate were unbiased at the 99-percent confidence limit, for 1983 results. Relative-percent differences between the measured and known analyte concentration for calcium , magnesium, sodium, potassium, chloride, and sulfate have been calculated for 1983. The median relative percent difference for calcium was 17.0; magnesium was 6.4; sodium was 10.8; potassium was 6.4; chloride was 17.2; and sulfate was -5.3. These relative percent differences should be used to correct the 1983 data before user-analysis of the data. Variances have been calculated for calcium, magnesium, sodium, potassium, chloride, and sulfate determinations. These variances should be applicable to natural-sample analyte concentrations reported by the National Atmospheric Deposition Program and National Trends Network for calendar year 1983. (USGS)

Why system safety programs can fail

NASA Technical Reports Server (NTRS)

Hammer, W.

1971-01-01

Factors that cause system safety programs to fail are discussed from the viewpoint that in general these programs have not achieved their intended aims. The one item which is considered to contribute most to failure of a system safety program is a poor statement of work which consists of ambiguity, lack of clear definition, use of obsolete requirements, and pure typographical errors. It is pointed out that unless safety requirements are stated clearly, and where they are readily apparent as firm requirements, some of them will be overlooked by designers and contractors. The lack of clarity is stated as being a major contributing factor in system safety program failure and usually evidenced in: (1) lack of clear requirements by the procuring activity, (2) lack of clear understanding of system safety by other managers, and (3) lack of clear methodology to be employed by system safety engineers.

Program evaluation of FHWA pedestrian and bicycle safety activities.

DOT National Transportation Integrated Search

2011-03-01

"Introduction : FHWAs Office of Highway Safety (HSA) initiated a program evaluation by Booz Allen Hamilton to assess the overall effectiveness of the Agencys Pedestrian and Bicycle Safety Program. The evaluation covers pedestrian and bicycle sa...

Background report guidance for roadway safety data to support the highway safety improvement program.

DOT National Transportation Integrated Search

2011-06-01

"Quality data are the foundation for making important decisions regarding the design, operation, and safety of : roadways. The Highway Safety Improvement Program (HSIP) provides information on how safety data should be : used. However, there are no d...

Safety, reliability, maintainability and quality provisions for the Space Shuttle program

NASA Technical Reports Server (NTRS)

1990-01-01

This publication establishes common safety, reliability, maintainability and quality provisions for the Space Shuttle Program. NASA Centers shall use this publication both as the basis for negotiating safety, reliability, maintainability and quality requirements with Shuttle Program contractors and as the guideline for conduct of program safety, reliability, maintainability and quality activities at the Centers. Centers shall assure that applicable provisions of the publication are imposed in lower tier contracts. Centers shall give due regard to other Space Shuttle Program planning in order to provide an integrated total Space Shuttle Program activity. In the implementation of safety, reliability, maintainability and quality activities, consideration shall be given to hardware complexity, supplier experience, state of hardware development, unit cost, and hardware use. The approach and methods for contractor implementation shall be described in the contractors safety, reliability, maintainability and quality plans. This publication incorporates provisions of NASA documents: NHB 1700.1 'NASA Safety Manual, Vol. 1'; NHB 5300.4(IA), 'Reliability Program Provisions for Aeronautical and Space System Contractors'; and NHB 5300.4(1B), 'Quality Program Provisions for Aeronautical and Space System Contractors'. It has been tailored from the above documents based on experience in other programs. It is intended that this publication be reviewed and revised, as appropriate, to reflect new experience and to assure continuing viability.

A Field Study Program in Analytical Chemistry for College Seniors.

ERIC Educational Resources Information Center

Langhus, D. L.; Flinchbaugh, D. A.

1986-01-01

Describes an elective field study program at Moravian College (Pennsylvania) in which seniors in analytical chemistry obtain first-hand experience at Bethlehem Steel Corporation. Discusses the program's planning phase, some method development projects done by students, experiences received in laboratory operations, and the evaluation of student…

Critical roles of orthopaedic surgeon leadership in healthcare systems to improve orthopaedic surgical patient safety.

PubMed

Kuo, Calvin C; Robb, William J

2013-06-01

The prevention of medical and surgical harm remains an important public health problem despite increased awareness and implementation of safety programs. Successful introduction and maintenance of surgical safety programs require both surgeon leadership and collaborative surgeon-hospital alignment. Documentation of success of such surgical safety programs in orthopaedic practice is limited. We describe the scope of orthopaedic surgical patient safety issues, define critical elements of orthopaedic surgical safety, and outline leadership roles for orthopaedic surgeons needed to establish and sustain a culture of safety in contemporary healthcare systems. We identified the most common causes of preventable surgical harm based on adverse and sentinel surgical events reported to The Joint Commission. A comprehensive literature review through a MEDLINE(®) database search (January 1982 through April 2012) to identify pertinent orthopaedic surgical safety articles found 14 articles. Where gaps in orthopaedic literature were identified, the review was supplemented by 22 nonorthopaedic surgical references. Our final review included 36 articles. Six important surgical safety program elements needed to eliminate preventable surgical harm were identified: (1) effective surgical team communication, (2) proper informed consent, (3) implementation and regular use of surgical checklists, (4) proper surgical site/procedure identification, (5) reduction of surgical team distractions, and (6) routine surgical data collection and analysis to improve the safety and quality of surgical patient care. Successful surgical safety programs require a culture of safety supported by all six key surgical safety program elements, active surgeon champions, and collaborative hospital and/or administrative support designed to enhance surgical safety and improve surgical patient outcomes. Further research measuring improvements from such surgical safety systems in orthopaedic care is needed.

Planning, evaluation and analytical studies in planetary quarantine and spacecraft sterilization

NASA Technical Reports Server (NTRS)

1972-01-01

The technical and analytical support used to aid in developing requirements for planetary quarantine are presented. The investigation was divided into 8 work tasks which are presented in tabular form. Data include methods of sterilization, safety margins for quarantine, revision of contamination logs for Mars and Venus, and estimates of encapsulated and 'free' microbial burden.

High risk and little knowledge: Overdose experiences and knowledge among young adult nonmedical prescription opioid users

PubMed Central

Frank, David; Mateu-Gelabert, Pedro; Guarino, Honoria; Bennett, Alex; Wendel, Travis; Jessell, Lauren; Teper, Anastasia

2014-01-01

Background Opioid-involved overdoses in the United States have dramatically increased in the last 15 years, largely due to a rise in prescription opioid (PO) use. Yet few studies have examined the overdose knowledge and experience of nonmedical PO users. Methods In depth, semi-structured, audio-recorded interviews were conducted with 46 New York City young adults (ages 18–32) who reported using POs nonmedically within the past 30 days. Verbatim interview transcripts were coded for key themes in an analytic process informed by grounded theory. Results Despite significant experience with overdose (including overdose deaths), either personally or within opioid-using networks, participants were relatively uninformed about overdose awareness, avoidance and response strategies, in particular the use of naloxone. Overdose experiences typically occurred when multiple pharmaceuticals were used (often in combination with alcohol) or after participants had transitioned to heroin injection. Participants tended to see themselves as distinct from traditional heroin users, and were often outside of the networks reached by traditional opioid safety/overdose prevention services. Consequently, they were unlikely to utilize harm reduction services, such as syringe exchange programs (SEPs), that address drug users' health and safety. Conclusions These findings suggest that many young adult nonmedical PO users are at high risk of both fatal and non-fatal overdose. There is a pressing need to develop innovative outreach strategies and overdose prevention programs to better reach and serve young PO users and their network contacts. Prevention efforts addressing risk for accidental overdose, including opioid safety/overdose reversal education and naloxone distribution, should be tailored for and targeted to this vulnerable group. PMID:25151334

Highway Safety Program Manual: Volume 16: Debris Hazard Control and Cleanup.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 16 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on debris hazard control and cleanup. The purpose and objectives of such a program are outlined. Federal authority in the area of highway safety and policies regarding a debris control…

Curriculum and Evaluation Guide for Safety Education Programs. Research and Evaluation Report Series No. 40.00.

ERIC Educational Resources Information Center

Lowry, Carlee S.

Designed to assist Bureau of Indian Affairs school officials in the identification of safety education program needs, this evaluation guide focuses upon the basic operational components in a safety education program. The means for establishing an evaluation design for safety education are presented via a flexible model appropriate for most…

10 CFR 851.11 - Development and approval of worker safety and health program.

Code of Federal Regulations, 2010 CFR

2010-01-01

... workers at multi-contractor workplaces. (3) The worker safety and health program must describe how the... may be performed at a covered workplace unless an approved worker safety and health program is in... 10 Energy 4 2010-01-01 2010-01-01 false Development and approval of worker safety and health...

Validation of a common data model for active safety surveillance research

PubMed Central

Ryan, Patrick B; Reich, Christian G; Hartzema, Abraham G; Stang, Paul E

2011-01-01

Objective Systematic analysis of observational medical databases for active safety surveillance is hindered by the variation in data models and coding systems. Data analysts often find robust clinical data models difficult to understand and ill suited to support their analytic approaches. Further, some models do not facilitate the computations required for systematic analysis across many interventions and outcomes for large datasets. Translating the data from these idiosyncratic data models to a common data model (CDM) could facilitate both the analysts' understanding and the suitability for large-scale systematic analysis. In addition to facilitating analysis, a suitable CDM has to faithfully represent the source observational database. Before beginning to use the Observational Medical Outcomes Partnership (OMOP) CDM and a related dictionary of standardized terminologies for a study of large-scale systematic active safety surveillance, the authors validated the model's suitability for this use by example. Validation by example To validate the OMOP CDM, the model was instantiated into a relational database, data from 10 different observational healthcare databases were loaded into separate instances, a comprehensive array of analytic methods that operate on the data model was created, and these methods were executed against the databases to measure performance. Conclusion There was acceptable representation of the data from 10 observational databases in the OMOP CDM using the standardized terminologies selected, and a range of analytic methods was developed and executed with sufficient performance to be useful for active safety surveillance. PMID:22037893

A Review of Numerical Simulation and Analytical Modeling for Medical Devices Safety in MRI

PubMed Central

Kabil, J.; Belguerras, L.; Trattnig, S.; Pasquier, C.; Missoffe, A.

2016-01-01

Summary Objectives To review past and present challenges and ongoing trends in numerical simulation for MRI (Magnetic Resonance Imaging) safety evaluation of medical devices. Methods A wide literature review on numerical and analytical simulation on simple or complex medical devices in MRI electromagnetic fields shows the evolutions through time and a growing concern for MRI safety over the years. Major issues and achievements are described, as well as current trends and perspectives in this research field. Results Numerical simulation of medical devices is constantly evolving, supported by calculation methods now well-established. Implants with simple geometry can often be simulated in a computational human model, but one issue remaining today is the experimental validation of these human models. A great concern is to assess RF heating on implants too complex to be traditionally simulated, like pacemaker leads. Thus, ongoing researches focus on alternative hybrids methods, both numerical and experimental, with for example a transfer function method. For the static field and gradient fields, analytical models can be used for dimensioning simple implants shapes, but limited for complex geometries that cannot be studied with simplifying assumptions. Conclusions Numerical simulation is an essential tool for MRI safety testing of medical devices. The main issues remain the accuracy of simulations compared to real life and the studies of complex devices; but as the research field is constantly evolving, some promising ideas are now under investigation to take up the challenges. PMID:27830244

Immunogenicity of therapeutics: a matter of efficacy and safety.

PubMed

Nechansky, Andreas; Kircheis, Ralf

2010-11-01

The unwanted immunogenicity of therapeutic proteins is a major concern regarding patient safety. Furthermore, pharmacokinetic, pharmacodynamic and clinical efficacy can be seriously affected by the immunogenicity of therapeutic proteins. Authorities have fully recognized this issue and demand appropriate and well-characterized assays to detect anti-drug antibodies (ADAs). We provide an overview of the immunogenicity topic in general, the regulatory background and insight into underlying immunological mechanisms and the limited ability to predict clinical immunogenicity a priori. Furthermore, we comment on the analytical testing approach and the status-quo of appropriate method validation. The review provides insight regarding the analytical approach that is expected by regulatory authorities overseeing immunogenicity testing requirements. Additionally, the factors influencing immunogenicity are summarized and key references regarding immunogenicity testing approaches and method validation are discussed. The unwanted immunogenicity of protein therapeutics is of major concern because of its potential to affect patient safety and drug efficacy. Analytical testing is sophisticated and requires more than one assay. Because immunogenicity in humans is hardly predictable, assay development has to start in a timely fashion and for clinical studies immunogenicity assay validation is mandatory prior to analyzing patient serum samples. Regarding ADAs, the question remains as to when such antibodies are regarded of clinical relevance and what levels are, if at all, acceptable. In summary, the detection of ADAs should raise the awareness of the physician concerning patient safety and of the sponsor/manufacture concerning the immunogenic potential of the drug product.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jo, J.

This document is a report of the analytical results for samples collected from the radioactive wastes in Tank 241-U-202 at the Hanford Reservation. Core samples were collected from the solid wastes in the tank and underwent safety screening analyses including differential scanning calorimetry, thermogravimetric analysis, and total alpha analysis. Results indicate that no safety screening notification limits were exceeded.

Statewide traffic safety study phase I : review of current traffic safety research, practice, analytical procedures, and databases [technical summary report].

DOT National Transportation Integrated Search

2008-03-01

In the last decade, Louisianas traffic related fatality rate has consistently put Louisiana within the : top eight highest ranking states in the nation with regard to such; in 2001, Louisiana tied with : Montana and South Carolina as states with t...

23 CFR 1205.2 - Purpose.

Code of Federal Regulations, 2011 CFR

2011-04-01

... HIGHWAY SAFETY PROGRAMS; DETERMINATIONS OF EFFECTIVENESS § 1205.2 Purpose. The purpose of this part is to establish national highway safety priorities and establish program areas within which highway safety programs developed by the states would be eligible to receive Federal funding. ...

23 CFR 1205.2 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-04-01

... HIGHWAY SAFETY PROGRAMS; DETERMINATIONS OF EFFECTIVENESS § 1205.2 Purpose. The purpose of this part is to establish national highway safety priorities and establish program areas within which highway safety programs developed by the states would be eligible to receive Federal funding. ...

National child safety seat distribution program evaluation

DOT National Transportation Integrated Search

1999-03-01

The National Child Safety Seat Distribution Program (NCSS) was a multi-year, multi-phase program intended to distribute $8 million in child safety seats to low-income and special needs children in all fifty states. Non-profit organizations that recei...

Primer on the Highway Safety Improvement Program (HSIP)

DOT National Transportation Integrated Search

2014-09-16

The Highway Safety Improvement Program (HSIP) is a core Federal-aid program for State Departments of Transportation (State DOTs) administered by the Federal Highway Administration (FHWA). This is a major source of funding for safety projects on the n...

MedWatch, the FDA Safety Information and Adverse Event Reporting Program

MedlinePlus

... Information and Adverse Event Reporting Program MedWatch: The FDA Safety Information and Adverse Event Reporting Program Share ... use. [Posted 06/01/2018] More What's New FDA Approved Safety Information DailyMed (National Library of Medicine) ...

Overview of Energy Systems` safety analysis report programs. Safety Analysis Report Update Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-03-01

The primary purpose of an Safety Analysis Report (SAR) is to provide a basis for judging the adequacy of a facility`s safety. The SAR documents the safety analyses that systematically identify the hazards posed by the facility, analyze the consequences and risk of potential accidents, and describe hazard control measures that protect the health and safety of the public and employees. In addition, some SARs document, as Technical Safety Requirements (TSRs, which include Technical Specifications and Operational Safety Requirements), technical and administrative requirements that ensure the facility is operated within prescribed safety limits. SARs also provide conveniently summarized information thatmore » may be used to support procedure development, training, inspections, and other activities necessary to facility operation. This ``Overview of Energy Systems Safety Analysis Report Programs`` Provides an introduction to the programs and processes used in the development and maintenance of the SARs. It also summarizes some of the uses of the SARs within Energy Systems and DOE.« less

National Machine Guarding Program: Part 2. Safety management in small metal fabrication enterprises.

PubMed

Parker, David L; Yamin, Samuel C; Brosseau, Lisa M; Xi, Min; Gordon, Robert; Most, Ivan G; Stanley, Rodney

2015-11-01

Small manufacturing businesses often lack important safety programs. Many reasons have been set forth on why this has remained a persistent problem. The National Machine Guarding Program (NMGP) was a nationwide intervention conducted in partnership with two workers' compensation insurers. Insurance safety consultants collected baseline data in 221 business using a 33-question safety management audit. Audits were completed during an interview with the business owner or manager. Most measures of safety management improved with an increasing number of employees. This trend was particularly strong for lockout/tagout. However, size was only significant for businesses without a safety committee. Establishments with a safety committee scored higher (55% vs. 36%) on the safety management audit compared with those lacking a committee (P < 0.0001). Critical safety management programs were frequently absent. A safety committee appears to be a more important factor than business size in accounting for differences in outcome measures. © 2015 The Authors. American Journal of Industrial Medicine Published by Wiley Periodicals, Inc.

Patient safety training in pediatric emergency medicine: a national survey of program directors.

PubMed

Wolff, Margaret; Macias, Charles G; Garcia, Estevan; Stankovic, Curt

2014-07-01

The Accreditation Council for Graduate Medical Education requires training in patient safety and medical errors but does not provide specification for content or methods. Pediatric emergency medicine (EM) fellowship directors were surveyed to characterize current training of pediatric EM fellows in patient safety and to determine the need for additional training. From June 2013 to August 2013, pediatric EM fellowship directors were surveyed via e-mail. Of the 71 eligible survey respondents, 57 (80.3%) completed surveys. A formal curriculum was present in 24.6% of programs, with a median of 6 hours (range = 1 to 18 hours) dedicated to the curriculum. One program evaluated the efficacy of the curriculum. Nearly 91% of respondents without formal programs identified lack of local faculty expertise or interest as the primary barrier to implementing patient safety curricula. Of programs without formal curricula, 93.6% included at least one component of patient safety training in their fellowship programs. The majority of respondents would implement a standardized patient safety curriculum for pediatric EM if one was available. Despite the importance of patient safety training and requirements to train pediatric EM fellows in patient safety and medical errors, there is a lack of formal curriculum and local faculty expertise. The majority of programs have introduced components of patient safety training and desire a standardized curriculum. © 2014 by the Society for Academic Emergency Medicine.

Results of the U.S. Geological Survey's Analytical Evaluation Program for standard reference samples: T-155 (trace constituents), M-148 (major constituents), N-59 (nutrient constituents), N-60 (nutrient constituents), P-31 (low ionic strength constituents), GWT-4 (ground-water trace constituents) and Hg-27 (Mercury) distributed in September 1998

USGS Publications Warehouse

Farrar, Jerry W.

1999-01-01

This report presents the results of the U.S. Geological Survey's analytical evaluation program for seven standard reference samples -- T-155 (trace constituents), M-148 (major constituents), N-59 (nutrient constituents), N-60 (nutrient constituents), P-31 (low ionic strength constituents), GWT-4 (ground-water trace constituents), and Hg- 27 (mercury) -- which were distributed in September 1998 to 162 laboratories enrolled in the U.S. Geological Survey sponsored interlaboratory testing program. Analytical data that were received from 136 of the laboratories were evaluated with respect to overall laboratory performance and relative laboratory performance for each analyte in the seven reference samples. Results of these evaluations are presented in tabular form. Also presented are tables and graphs summarizing the analytical data provided by each laboratory for each analyte in the seven standard reference samples. The most probable value for each analyte was determined using nonparametric statistics.

Community-Based Mental Health and Behavioral Programs for Low-Income Urban Youth: A Meta-Analytic Review

ERIC Educational Resources Information Center

Farahmand, Farahnaz K.; Duffy, Sophia N.; Tailor, Megha A.; Dubois, David L.; Lyon, Aaron L.; Grant, Kathryn E.; Zarlinski, Jennifer C.; Masini, Olivia; Zander, Keith J.; Nathanson, Alison M.

2012-01-01

A meta-analytic review of 33 studies and 41 independent samples was conducted of the effectiveness of community-based mental health and behavioral programs for low-income urban youth. Findings indicated positive effects, with an overall mean effect of 0.25 at post-test. While this is comparable to previous meta-analytic intervention research with…

Highway Safety Program Manual: Volume 11: Emergency Medical Services.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 11 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on emergency medical services. The purpose of the program, Federal authority in the area of medical services, and policies related to an emergency medical services (EMS) program are…

Highway Safety Program Manual: Volume 9: Identification and Surveillance of Accident Locations.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 9 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) focuses on identification and surveillance of accident locations. The purpose of the program, its specific objectives, and its relationship with other programs are explored. Federal authority in the…

[Tail Plane Icing

NASA Technical Reports Server (NTRS)

1997-01-01

The Aviation Safety Program initiated by NASA in 1997 has put greater emphasis in safety related research activities. Ice-contaminated-tailplane stall (ICTS) has been identified by the NASA Lewis Icing Technology Branch as an important activity for aircraft safety related research. The ICTS phenomenon is characterized as a sudden, often uncontrollable aircraft nose- down pitching moment, which occurs due to increased angle-of-attack of the horizontal tailplane resulting in tailplane stall. Typically, this phenomenon occurs when lowering the flaps during final approach while operating in or recently departing from icing conditions. Ice formation on the tailplane leading edge can reduce tailplane angle-of-attack range and cause flow separation resulting in a significant reduction or complete loss of aircraft pitch control. In 1993, the Federal Aviation Authority (FAA) and NASA embarked upon a four-year research program to address the problem of tailplane stall and to quantify the effect of tailplane ice accretion on aircraft performance and handling characteristics. The goals of this program, which was completed in March 1998, were to collect aerodynamic data for an aircraft tail with and without ice contamination and to develop analytical methods for predicting the effects of tailplane ice contamination. Extensive dry air and icing tunnel tests which resulted in a database of the aerodynamic effects associated with tailplane ice contamination. Although the FAA/NASA tailplane icing program generated some answers regarding ice-contaminated-tailplane stall (ICTS) phenomena, NASA researchers have found many open questions that warrant further investigation into ICTS. In addition, several aircraft manufacturers have expressed interest in a second research program to expand the database to other tail configurations and to develop experimental and computational methodologies for evaluating the ICTS phenomenon. In 1998, the icing branch at NASA Lewis initiated a second multi-phase research program for tailplane icing (TIP II) to develop test methodologies and tailplane performance and handling qualities evaluation tools. The main objectives of this new NASA/Industry/Academia collaborative research programs were: (1) define and evaluate a sub-scale wind tunnel test methodology for determining tailplane performance degradation due to icing. (2) develop an experimental database of tailplane aerodynamic performance with and without ice contamination for a range of tailplane configurations. Wind tunnel tests were planned with representative general aviation aircraft, i.e., the Learjet 45, and a twin engine low speed aircraft. This report summarizes the research performed during the first year of the study, and outlines the work tasks for the second year.

Report on the U.S. Geological Survey's Evaluation Program Standard Reference Samples Distributed in October 1995: T-137 (Trace Constituents), M-136 (Major Constituents), N-47 (Nutrient Constituents), N-48 (Nutrient Constituents), P-25 (Low Ionic Strength Constituents), and Hg-21 (Mercury)

USGS Publications Warehouse

Farrar, Jerry W.; Long, H. Keith

1996-01-01

This report presents the results of the U.S. Geological Survey's analytical evaluation program for 6 standard reference samples--T-137 (trace constituents), M-136 (major constituents), N-47 (nutrient constituents), N-48 (nutrient constituents), P-25 (low ionic strength constituents), and Hg-21 (mercury)--that were distributed in October 1995 to 149 laboratories registered in the U.S. Geological Survey sponsored interlaboratory testing program. Analytical data that were received from 136 of the laboratories were evaluated with respect to: overall laboratory performance and relative laboratory performance for each analyte in the six reference samples. Results of these evaluations are presented in tabular form. Also presented are tables and graphs summarizing the analytical data provided by each laboratory for each analyte in the six standard reference samples. The most probable value for each analyte was determined using nonparametric statistics.

Report on the U.S. Geological Survey's evaluation program for standard reference samples distributed in April 1994; T-129 (trace constituents), M-130 (major constituents), N-42 (nutrients), P-22 (low ionic strength), and Hg-18 (mercury)

USGS Publications Warehouse

Long, H. Keith; Farrar, Jerry W.

1994-01-01

This report presents the results of the U.S. Geological Survey's analytical evaluation program for five standard reference samples--T-129 (trace constituents), M-130 (major constituents), N-42 (nutrients), P-22 (low ionic strength), Hg-18(mercury),--that were distributed in April 1994 to 157 laboratories registered in the U.S. Geological Survey sponsored interlaboratory testing program. Analytical data that were received from 133 of the laboratories were evaluated with respect to: overall laboratory performance and relative laboratory performance for each analyte in the five reference samples. Results of these evaluations are presented in tabular form. Also presented are tables and graphs summarizing the analytical data provided by each laboratory for each analyte in the five standard reference samples. The most probable value for each analyte was determined using nonparametric statistics.

Report of the U.S. Geological Survey's evaluation program for standard reference samples distributed in April 1993; T-123 (trace constituents), T-125 (trace constituents), M-126 (major constituents, N-38 (nutrients), N-39 (nutrients), P-20 (low ionic strength, and Hg-16 (mercury)

USGS Publications Warehouse

Long, H.K.; Farrar, J.W.

1993-01-01

This report presents the results of the U.S. Geological Survey's analytical evaluation program for seven standard reference samples--T-123 (trace constituents), T-125 (trace constituents), M-126 (major constituents), N-38 (nutrients), N-39 (Nutrients), P-20 (precipitation-low ionic strength), and Hg-16 (mercury)--that were distributed in April 1993 to 175 laboratories registered in the U.S. Geological Survey sponsored interlaboratory testing program. Analytical data received from 131 of the laboratories were evaluated with respect to: overall laboratory performance and relative laboratory performance for each analyte in the 7 reference samples. Results of these evaluations are presented in tabular form. Also presented are tables and graphs summarizing the analytical data provided by each laboratory for each analyte in the seven standard reference samples. The most probable value for each analyte was determined using nonparametric statistics.

DEVELOPMENT OF A SAFETY COMMUNICATION AND RECOGNITION PROGRAM FOR CONSTRUCTION

PubMed Central

SPARER, EMILY H.; HERRICK, ROBERT F.; DENNERLEIN, JACK T.

2017-01-01

Leading-indicator–based (e.g., hazard recognition) incentive programs provide an alternative to controversial lagging-indicator–based (e.g., injury rates) programs. We designed a leading-indicator–based safety communication and recognition program that incentivized safe working conditions. The program was piloted for two months on a commercial construction worksite, and then redesigned using qualitative interview and focus group data from management and workers. We then ran the redesigned program for six months on the same worksite. Foremen received detailed weekly feedback from safety inspections, and posters displayed worksite and subcontractor safety scores. In the final program design, the whole site, not individual subcontractors, was the unit of analysis and recognition. This received high levels of acceptance from workers, who noted increased levels of site unity and team-building. This pilot program showed that construction workers value solidarity with others on site, demonstrating the importance of health and safety programs that engage all workers through a reliable and consistent communication infrastructure. PMID:25815741

25 CFR 170.144 - What are eligible highway safety projects?

Code of Federal Regulations, 2010 CFR

2010-04-01

...-related deaths, injuries and accidents; (j) Impaired driver initiatives; (k) Child safety seat programs... travel on IRRs, such as guardrail construction and traffic markings; (f) Development of a safety management system; (g) Education and outreach highway safety programs, such as use of child safety seats...

29 CFR 1960.89 - Organization.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS... the appropriate OSHA Regional Office and the Office of Federal Agency Safety and Health Programs of...

29 CFR 1960.90 - Operating procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... representatives of the council. The Office of Federal Agency Safety and Health Programs, OSHA, shall furnish...

29 CFR 1960.89 - Organization.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS... the appropriate OSHA Regional Office and the Office of Federal Agency Safety and Health Programs of...

29 CFR 1960.90 - Operating procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... representatives of the council. The Office of Federal Agency Safety and Health Programs, OSHA, shall furnish...

23 CFR 924.7 - Program structure.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 23 Highways 1 2012-04-01 2012-04-01 false Program structure. 924.7 Section 924.7 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HIGHWAY SAFETY HIGHWAY SAFETY IMPROVEMENT PROGRAM... implementation through highway safety improvement projects. The HSIP includes construction and operational...

23 CFR 924.7 - Program structure.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 23 Highways 1 2014-04-01 2014-04-01 false Program structure. 924.7 Section 924.7 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HIGHWAY SAFETY HIGHWAY SAFETY IMPROVEMENT PROGRAM... implementation through highway safety improvement projects. The HSIP includes construction and operational...

Development and evaluation of Virginia's highway safety corridor program.

DOT National Transportation Integrated Search

2006-01-01

On July 1, 2003, legislation went into effect that established a highway safety corridor (HSC) program for Virginia. The intent of the HSC program is to address safety concerns through a combination of law enforcement, education, and engineering coun...

Aviation Safety Reporting System: Process and Procedures

NASA Technical Reports Server (NTRS)

Connell, Linda J.

1997-01-01

The Aviation Safety Reporting System (ASRS) was established in 1976 under an agreement between the Federal Aviation Administration (FAA) and the National Aeronautics and Space Administration (NASA). This cooperative safety program invites pilots, air traffic controllers, flight attendants, maintenance personnel, and others to voluntarily report to NASA any aviation incident or safety hazard. The FAA provides most of the program funding. NASA administers the program, sets its policies in consultation with the FAA and aviation community, and receives the reports submitted to the program. The FAA offers those who use the ASRS program two important reporting guarantees: confidentiality and limited immunity. Reports sent to ASRS are held in strict confidence. More than 350,000 reports have been submitted since the program's beginning without a single reporter's identity being revealed. ASRS removes all personal names and other potentially identifying information before entering reports into its database. This system is a very successful, proof-of-concept for gathering safety data in order to provide timely information about safety issues. The ASRS information is crucial to aviation safety efforts both nationally and internationally. It can be utilized as the first step in safety by providing the direction and content to informed policies, procedures, and research, especially human factors. The ASRS process and procedures will be presented as one model of safety reporting feedback systems.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The purpose of this report is to summarize the activities of the Analytical Chemistry Laboratory (ACL) at Argonne National Laboratory (ANL) for Fiscal Year (FY) 1993 (October 1992 through September 1993). This annual report is the tenth for the ACL and describes continuing effort on projects, work on new projects, and contributions of the ACL staff to various programs at ANL. The Analytical Chemistry Laboratory is a full-cost-recovery service center, with the primary mission of providing a broad range of analytical chemistry support services to the scientific and engineering programs at ANL. The ACL also has research programs in analyticalmore » chemistry, conducts instrumental and methods development, and provides analytical services for governmental, educational, and industrial organizations. The ACL handles a wide range of analytical problems. Some routine or standard analyses are done, but it is common for the Argonne programs to generate unique problems that require development or modification of methods and adaption of techniques to obtain useful analytical data. The ACL is administratively within the Chemical Technology Division (CMT), its principal ANL client, but provides technical support for many of the technical divisions and programs at ANL. The ACL has four technical groups--Chemical Analysis, Instrumental Analysis, Organic Analysis, and Environmental Analysis--which together include about 45 technical staff members. Talents and interests of staff members cross the group lines, as do many projects within the ACL.« less

Safety-net hospitals more likely than other hospitals to fare poorly under Medicare's value-based purchasing.

PubMed

Gilman, Matlin; Adams, E Kathleen; Hockenberry, Jason M; Milstein, Arnold S; Wilson, Ira B; Becker, Edmund R

2015-03-01

Medicare's value-based purchasing (VBP) program potentially puts safety-net hospitals at a financial disadvantage compared to other hospitals. In 2014, the second year of the program, patient mortality measures were added to the VBP program's algorithm for assigning penalties and rewards. We examined whether the inclusion of mortality measures in the second year of the program had a disproportionate impact on safety-net hospitals nationally. We found that safety-net hospitals were more likely than other hospitals to be penalized under the VBP program as a result of their poorer performance on process and patient experience scores. In 2014, 63 percent of safety-net hospitals versus 51 percent of all other sample hospitals received payment rate reductions under the program. However, safety-net hospitals' performance on mortality measures was comparable to that of other hospitals, with an average VBP survival score of thirty-two versus thirty-one among other hospitals. Although safety-net hospitals are still more likely than other hospitals to fare poorly under the VBP program, increasing the weight given to mortality in the VBP payment algorithm would reduce this disadvantage. Project HOPE—The People-to-People Health Foundation, Inc.

NASA safety program activities in support of the Space Exploration Initiatives Nuclear Propulsion program

NASA Technical Reports Server (NTRS)

Sawyer, J. C., Jr.

1993-01-01

The activities of the joint NASA/DOE/DOD Nuclear Propulsion Program Technical Panels have been used as the basis for the current development of safety policies and requirements for the Space Exploration Initiatives (SEI) Nuclear Propulsion Technology development program. The Safety Division of the NASA Office of Safety and Mission Quality has initiated efforts to develop policies for the safe use of nuclear propulsion in space through involvement in the joint agency Nuclear Safety Policy Working Group (NSPWG), encouraged expansion of the initial policy development into proposed programmatic requirements, and suggested further expansion into the overall risk assessment and risk management process for the NASA Exploration Program. Similar efforts are underway within the Department of Energy to ensure the safe development and testing of nuclear propulsion systems on Earth. This paper describes the NASA safety policy related to requirements for the design of systems that may operate where Earth re-entry is a possibility. The expected plan of action is to support and oversee activities related to the technology development of nuclear propulsion in space, and support the overall safety and risk management program being developed for the NASA Exploration Program.

NASA Range Safety Annual Report 2007

NASA Technical Reports Server (NTRS)

Dumont, Alan G.

2007-01-01

As always, Range Safety has been involved in a number of exciting and challenging activities and events. Throughout the year, we have strived to meet our goal of protecting the public, the workforce, and property during range operations. During the past year, Range Safety was involved in the development, implementation, and support of range safety policy. Range Safety training curriculum development was completed this year and several courses were presented. Tailoring exercises concerning the Constellation Program were undertaken with representatives from the Constellation Program, the 45th Space Wing, and the Launch Constellation Range Safety Panel. Range Safety actively supported the Range Commanders Council and it subgroups and remained involved in updating policy related to flight safety systems and flight safety analysis. In addition, Range Safety supported the Space Shuttle Range Safety Panel and addressed policy concerning unmanned aircraft systems. Launch operations at Kennedy Space Center, the Eastern and Western ranges, Dryden Flight Research Center, and Wallops Flight Facility were addressed. Range Safety was also involved in the evaluation of a number of research and development efforts, including the space-based range (formerly STARS), the autonomous flight safety system, the enhanced flight termination system, and the joint advanced range safety system. Flight safety system challenges were evaluated. Range Safety's role in the Space Florida Customer Assistance Service Program for the Eastern Range was covered along with our support for the Space Florida Educational Balloon Release Program. We hope you have found the web-based format both accessible and easy to use. Anyone having questions or wishing to have an article included in the 2008 Range Safety Annual Report should contact Alan Dumont, the NASA Range Safety Program Manager located at the Kennedy Space Center, or Michael Dook at NASA Headquarters.

Do Premarital Education Programs Really Work? A Meta-Analytic Study

ERIC Educational Resources Information Center

Fawcett, Elizabeth B.; Hawkins, Alan J.; Blanchard, Victoria L.; Carroll, Jason S.

2010-01-01

Previous studies (J. S. Carroll & W. J. Doherty, 2003) have asserted that premarital education programs have a positive effect on program participants. Using meta-analytic methods of current best practices to look across the entire body of published and unpublished evaluation research on premarital education, we found a more complex pattern of…

Goals and Characteristics of Long-Term Care Programs: An Analytic Model.

ERIC Educational Resources Information Center

Braun, Kathryn L.; Rose, Charles L.

1989-01-01

Used medico-social analytic model to compare five long-term care programs: Skilled Nursing Facility-Intermediate Care Facility (SNF-ICF) homes, ICF homes, foster homes, day hospitals, and home care. Identified similarities and differences among programs. Preliminary findings suggest that model is useful in the evaluation and design of long-term…

A Meta-Analytic Review of Obesity Prevention Programs for Children and Adolescents: The Skinny on Interventions that Work

ERIC Educational Resources Information Center

Stice, Eric; Shaw, Heather; Marti, C. Nathan

2006-01-01

This meta-analytic review summarizes obesity prevention programs and their effects and investigates participant, intervention, delivery, and design features associated with larger effects. A literature search identified 64 prevention programs seeking to produce weight gain prevention effects, of which 21% produced significant prevention effects…

Faculty Forum: The GRE Analytical Writing Test-- Description and Utilization

ERIC Educational Resources Information Center

Briihl, Deborah S.; Wasieleski, David T.

2007-01-01

The authors surveyed graduate programs to see how they use the Graduate Record Examination Analytic Writing (GRE-AW) Test. Only 35% of the graduate programs that responded use the GRE-AW test in their admission policy; of the programs not using it, most do not plan to do so. The programs using the GRE-AW rated it as medium or low in importance in…

10 CFR 851.23 - Safety and health standards.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 4 2014-01-01 2014-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

10 CFR 851.23 - Safety and health standards.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 4 2012-01-01 2012-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

10 CFR 851.23 - Safety and health standards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

10 CFR 851.23 - Safety and health standards.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 4 2013-01-01 2013-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

10 CFR 851.23 - Safety and health standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

76 FR 64110 - Safety and Health Management Programs for Mines

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-17

... DEPARTMENT OF LABOR Mine Safety and Health Administration RIN 1219-AB71 Safety and Health Management Programs for Mines AGENCY: Mine Safety and Health Administration, Labor. ACTION: Notice of public meetings. SUMMARY: The Mine Safety and Health Administration (MSHA) is holding a public meeting, and plans...

Safety Teams: An Approach to Engage Students in Laboratory Safety

ERIC Educational Resources Information Center

Alaimo, Peter J.; Langenhan, Joseph M.; Tanner, Martha J.; Ferrenberg, Scott M.

2010-01-01

We developed and implemented a yearlong safety program into our organic chemistry lab courses that aims to enhance student attitudes toward safety and to ensure students learn to recognize, demonstrate, and assess safe laboratory practices. This active, collaborative program involves the use of student "safety teams" and includes…

30 CFR 77.1708 - Safety program; instruction of persons employed at the mine.

Code of Federal Regulations, 2010 CFR

2010-07-01

... at the mine. 77.1708 Section 77.1708 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND COAL MINES Miscellaneous § 77.1708 Safety program; instruction of persons...

29 CFR 1960.31 - Inspections by OSHA.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... scheduled inspections as an integral part of OSHA's evaluation of an agency's safety and health program in...

29 CFR 1960.31 - Inspections by OSHA.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... scheduled inspections as an integral part of OSHA's evaluation of an agency's safety and health program in...

29 CFR 1960.31 - Inspections by OSHA.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... scheduled inspections as an integral part of OSHA's evaluation of an agency's safety and health program in...

29 CFR 1960.78 - Purpose and scope.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs § 1960.78 Purpose and scope. (a) The...

29 CFR 1960.78 - Purpose and scope.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs § 1960.78 Purpose and scope. (a) The...

29 CFR 1960.78 - Purpose and scope.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs § 1960.78 Purpose and scope. (a) The...

29 CFR 1960.31 - Inspections by OSHA.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... scheduled inspections as an integral part of OSHA's evaluation of an agency's safety and health program in...

29 CFR 1960.31 - Inspections by OSHA.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... scheduled inspections as an integral part of OSHA's evaluation of an agency's safety and health program in...

National Dam Safety Program. Lake Muskoday Dam (Inventory Number N.Y. 341) Delaware River Basin, Sullivan County, New York. Phase I Inspection Report,

DTIC Science & Technology

1981-09-14

DACW-51-81-C-0006 . PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT PROJECT. TASK AREA & WORK UNIT NUMBERS ~ Flaherty-Giauara Associates...olie It neceary and Idontily b block number) Dam Safety National Dam Safety Program Visual Inspection Lake Muskoday Dam Hydrology, Structural Stability...DELAWARE RIVER BASIN LAKE MUSKODAY DAM SULLIVAN COUNTY, NEW YORK INVENTORY No.NY341 PHASE I INSPECTION REPORT NATIONAL DAM SAFETY PROGRAM J T C NEW YORK

Workplace safety and health programs, practices, and conditions in auto collision repair businesses.

PubMed

Brosseau, L M; Bejan, A; Parker, D L; Skan, M; Xi, M

2014-01-01

This article describes the results of a pre-intervention safety assessment conducted in 49 auto collision repair businesses and owners' commitments to specific improvements. A 92-item standardized audit tool employed interviews, record reviews, and observations to assess safety and health programs, training, and workplace conditions. Owners were asked to improve at least one-third of incorrect, deficient, or missing (not in compliance with regulations or not meeting best practice) items, of which a majority were critical or highly important for ensuring workplace safety. Two-thirds of all items were present, with the highest fraction related to electrical safety, machine safety, and lockout/tagout. One-half of shops did not have written safety programs and had not conducted recent training. Many had deficiencies in respiratory protection programs and practices. Thirteen businesses with a current or past relationship with a safety consultant had a significantly higher fraction of correct items, in particular related to safety programs, up-to-date training, paint booth and mixing room conditions, electrical safety, and respiratory protection. Owners selected an average of 58% of recommended improvements; they were most likely to select items related to employee Right-to-Know training, emergency exits, fire extinguishers, and respiratory protection. They were least likely to say they would improve written safety programs, stop routine spraying outside the booth, or provide adequate fire protection for spray areas outside the booth. These baseline results suggest that it may be possible to bring about workplace improvements using targeted assistance from occupational health and safety professionals.

Bertolette Selected as EHS Champion of Safety | Poster

Cancer.gov

Dan Bertolette has been selected as the most recent NCI at Frederick Champion of Safety, as part of the Champions of Safety Program sponsored by the Environment, Health, and Safety Program (EHS). The goal of the program, which began last year, is to raise awareness and promote a culture of safety by showing NCI at Frederick staff at work in their respective workplaces, according to Terri Bray, director, EHS. “Since we have so many varied work environments here, safety often takes on a different look, according to workplace. We want to take the opportunity to show real people in real situations, to encourage safety everywhere,” Bray said.

The CCLM contribution to improvements in quality and patient safety.

PubMed

Plebani, Mario

2013-01-01

Clinical laboratories play an important role in improving patient care. The past decades have seen unbelievable, often unpredictable improvements in analytical performance. Although the seminal concept of the brain-to-brain laboratory loop has been described more than four decades ago, there is now a growing awareness about the importance of extra-analytical aspects in laboratory quality. According to this concept, all phases and activities of the testing cycle should be assessed, monitored and improved in order to decrease the total error rates thereby improving patients' safety. Clinical Chemistry and Laboratory Medicine (CCLM) not only has followed the shift in perception of quality in the discipline, but has been the catalyst for promoting a large debate on this topic, underlining the value of papers dealing with errors in clinical laboratories and possible remedies, as well as new approaches to the definition of quality in pre-, intra-, and post-analytical steps. The celebration of the 50th anniversary of the CCLM journal offers the opportunity to recall and mention some milestones in the approach to quality and patient safety and to inform our readers, as well as laboratory professionals, clinicians and all the stakeholders of the willingness of the journal to maintain quality issues as central to its interest even in the future.

Recent development of electrochemiluminescence sensors for food analysis.

PubMed

Hao, Nan; Wang, Kun

2016-10-01

Food quality and safety are closely related to human health. In the face of unceasing food safety incidents, various analytical techniques, such as mass spectrometry, chromatography, spectroscopy, and electrochemistry, have been applied in food analysis. High sensitivity usually requires expensive instruments and complicated procedures. Although these modern analytical techniques are sensitive enough to ensure food safety, sometimes their applications are limited because of the cost, usability, and speed of analysis. Electrochemiluminescence (ECL) is a powerful analytical technique that is attracting more and more attention because of its outstanding performance. In this review, the mechanisms of ECL and common ECL luminophores are briefly introduced. Then an overall review of the principles and applications of ECL sensors for food analysis is provided. ECL can be flexibly combined with various separation techniques. Novel materials (e.g., various nanomaterials) and strategies (e.g., immunoassay, aptasensors, and microfluidics) have been progressively introduced into the design of ECL sensors. By illustrating some selected representative works, we summarize the state of the art in the development of ECL sensors for toxins, heavy metals, pesticides, residual drugs, illegal additives, viruses, and bacterias. Compared with other methods, ECL can provide rapid, low-cost, and sensitive detection for various food contaminants in complex matrixes. However, there are also some limitations and challenges. Improvements suited to the characteristics of food analysis are still necessary.

77 FR 15453 - Pipeline Safety: Information Collection Activities

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-15

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No... information collection titled, ``Gas Pipeline Safety Program Certification and Hazardous Liquid Pipeline... collection request that PHMSA will be submitting to OMB for renewal titled, ``Gas Pipeline Safety Program...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Green, D.W.; Heinrich, R.R.; Graczyk, D.G.

The purpose of this report is to summarize the activities of the Analytical Chemistry Laboratory (ACL) at Argonne National Laboratory (ANL) for Fiscal Year 1991 (October 1990 through September 1991). This is the eighth annual report for the ACL. The Analytical Chemistry Laboratory is a full-cost-recovery service center, with the primary mission of providing a broad range of analytical chemistry support services to the scientific and engineering programs at ANL. In addition, the ACL conducts a research program in analytical chemistry, works on instrumental and methods development, and provides analytical services for governmental, educational, and industrial organizations. The ACL handlesmore » a wide range of analytical problems, from routine standard analyses to unique problems that require significant development of methods and techniques.« less

Near real-time vaccine safety surveillance with partially accrued data.

PubMed

Greene, Sharon K; Kulldorff, Martin; Yin, Ruihua; Yih, W Katherine; Lieu, Tracy A; Weintraub, Eric S; Lee, Grace M

2011-06-01

The Vaccine Safety Datalink (VSD) Project conducts near real-time vaccine safety surveillance using sequential analytic methods. Timely surveillance is critical in identifying potential safety problems and preventing additional exposure before most vaccines are administered. For vaccines that are administered during a short period, such as influenza vaccines, timeliness can be improved by undertaking analyses while risk windows following vaccination are ongoing and by accommodating predictable and unpredictable data accrual delays. We describe practical solutions to these challenges, which were adopted by the VSD Project during pandemic and seasonal influenza vaccine safety surveillance in 2009/2010. Adjustments were made to two sequential analytic approaches. The Poisson-based approach compared the number of pre-defined adverse events observed following vaccination with the number expected using historical data. The expected number was adjusted for the proportion of the risk window elapsed and the proportion of inpatient data estimated to have accrued. The binomial-based approach used a self-controlled design, comparing the observed numbers of events in risk versus comparison windows. Events were included in analysis only if they occurred during a week that had already passed for both windows. Analyzing data before risk windows fully elapsed improved the timeliness of safety surveillance. Adjustments for data accrual lags were tailored to each data source and avoided biasing analyses away from detecting a potential safety problem, particularly early during surveillance. The timeliness of vaccine and drug safety surveillance can be improved by properly accounting for partially elapsed windows and data accrual delays. Copyright © 2011 John Wiley & Sons, Ltd.

FIELD ANALYTICAL SCREENING PROGRAM: PCB METHOD - INNOVATIVE TECHNOLOGY REPORT

EPA Science Inventory

This innovative technology evaluation report (ITER) presents information on the demonstration of the U.S. Environmental Protection Agency (EPA) Region 7 Superfund Field Analytical Screening Program (FASP) method for determining polychlorinated biphenyl (PCB) contamination in soil...

Using Contemporary Leadership Skills in Medication Safety Programs.

PubMed

Hertig, John B; Hultgren, Kyle E; Weber, Robert J

2016-04-01

The discipline of studying medication errors and implementing medication safety programs in hospitals dates to the 1970s. These initial programs to prevent errors focused only on pharmacy operation changes - and not the broad medication use system. In the late 1990s, research showed that faulty systems, and not faulty people, are responsible for errors and require a multidisciplinary approach. The 2013 ASHP Statement on the Role of the Medication Safety Leader recommended that medication safety leaders be integrated team members rather than a single point of contact. Successful medication safety programs must employ a new approach - one that embraces the skills of all health care team members and positions many leaders to improve safety. This approach requires a new set of leadership skills based on contemporary management principles, including followership, team-building, tracking and assessing progress, storytelling and communication, and cultivating innovation, all of which promote transformational change. The application of these skills in developing or changing a medication safety program is reviewed in this article.

Using Contemporary Leadership Skills in Medication Safety Programs

PubMed Central

Hertig, John B.; Hultgren, Kyle E.; Weber, Robert J.

2016-01-01

The discipline of studying medication errors and implementing medication safety programs in hospitals dates to the 1970s. These initial programs to prevent errors focused only on pharmacy operation changes – and not the broad medication use system. In the late 1990s, research showed that faulty systems, and not faulty people, are responsible for errors and require a multidisciplinary approach. The 2013 ASHP Statement on the Role of the Medication Safety Leader recommended that medication safety leaders be integrated team members rather than a single point of contact. Successful medication safety programs must employ a new approach – one that embraces the skills of all health care team members and positions many leaders to improve safety. This approach requires a new set of leadership skills based on contemporary management principles, including followership, team-building, tracking and assessing progress, storytelling and communication, and cultivating innovation, all of which promote transformational change. The application of these skills in developing or changing a medication safety program is reviewed in this article. PMID:27303083

The Ergonomic Program Implementation Continuum (EPIC): integration of health and safety--a process evaluation in the healthcare sector.

PubMed

Baumann, Andrea; Holness, D Linn; Norman, Patrica; Idriss-Wheeler, Dina; Boucher, Patricia

2012-07-01

This article presents a health and safety intervention model and the use of process evaluation to assess a participatory ergonomic intervention. The effectiveness of the Ergonomic Program Implementation Continuum (EPIC) was assessed at six healthcare pilot sites in Ontario, Canada. The model provided a framework to demonstrate evaluation findings. Participants reported that EPIC was thorough and identified improvements related to its use. Participants believed the program contributed to advancing an organizational culture of safety (COS). Main barriers to program uptake included resistance to change and need for adequate funding and resources. The dedication of organizational leaders and consultant coaches was identified as essential to the program's success. In terms of impact on industry, findings contribute to the evidence-based knowledge of health and safety interventions and support use of the framework for creating a robust infrastructure to advance organizational COS and link staff safety and wellness with patient safety in healthcare. Copyright © 2012 National Safety Council and Elsevier Ltd. All rights reserved.

Management of radioactive material safety programs at medical facilities. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Camper, L.W.; Schlueter, J.; Woods, S.

A Task Force, comprising eight US Nuclear Regulatory Commission and two Agreement State program staff members, developed the guidance contained in this report. This report describes a systematic approach for effectively managing radiation safety programs at medical facilities. This is accomplished by defining and emphasizing the roles of an institution`s executive management, radiation safety committee, and radiation safety officer. Various aspects of program management are discussed and guidance is offered on selecting the radiation safety officer, determining adequate resources for the program, using such contractual services as consultants and service companies, conducting audits, and establishing the roles of authorized usersmore » and supervised individuals; NRC`s reporting and notification requirements are discussed, and a general description is given of how NRC`s licensing, inspection and enforcement programs work.« less

77 FR 54615 - Strategic Management Program; Fiscal Year 2013-2016 Strategic Plan

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-05

... Manager, Strategic Management Program; National Transportation Safety Board, 490 L'Enfant Plaza SW., MD-1... NATIONAL TRANSPORTATION SAFETY BOARD Strategic Management Program; Fiscal Year 2013-2016 Strategic Plan AGENCY: National Transportation Safety Board. ACTION: Notice: Request for comments. SUMMARY: This...

Evaluation of the US Department of Energy's occupational safety and health program for its government-owned contractor-operated facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The purpose of this report is to present to Secretary of Energy James Watkins the findings and recommendations of the Occupational Safety and Health Administration's (OSHA) evaluation of the Department of Energy's (DOE) programs for worker safety and health at DOE's government-owned contractor-operated (GOCO) nuclear facilities. The OSHA evaluation is based on an intensive and comprehensive review and analysis of DOE's worker safety and health programs including: written programs; safety and health inspection programs; and the adequacy of resource, training, and management controls. The evaluation began on April 10, 1990 and involved over three staff years before its conclusion. Themore » evaluation was initiated by former Secretary of Labor Elizabeth Dole in response to Secretary of Energy James Watkins' request that OSHA assist him in determining the actions needed to assure that DOE has an exemplary safety and health program in place at its GOCOs. 6 figs.« less

Advanced Electron Microscopy and Micro analytical technique development and application for Irradiated TRISO Coated Particles from the AGR-1 Experiment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Van Rooyen, Isabella Johanna; Lillo, Thomas Martin; Wen, Haiming

2017-01-01

A series of up to seven irradiation experiments are planned for the Advanced Gas Reactor (AGR) Fuel Development and Quantification Program, with irradiation completed at the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL) for the first experiment (i.e., AGR-1) in November 2009 for an effective 620 full power days. The objective of the AGR-1 experiment was primarily to provide lessons learned on the multi-capsule test train design and to provide early data on fuel performance for use in fuel fabrication process development and post-irradiation safety testing data at high temperatures. This report describes the advanced microscopy and micro-analysismore » results on selected AGR-1 coated particles.« less

Integrating evidence-based practices for increasing cancer screenings in safety net health systems: a multiple case study using the Consolidated Framework for Implementation Research.

PubMed

Liang, Shuting; Kegler, Michelle C; Cotter, Megan; Emily, Phillips; Beasley, Derrick; Hermstad, April; Morton, Rentonia; Martinez, Jeremy; Riehman, Kara

2016-08-02

Implementing evidence-based practices (EBPs) to increase cancer screenings in safety net primary care systems has great potential for reducing cancer disparities. Yet there is a gap in understanding the factors and mechanisms that influence EBP implementation within these high-priority systems. Guided by the Consolidated Framework for Implementation Research (CFIR), our study aims to fill this gap with a multiple case study of health care safety net systems that were funded by an American Cancer Society (ACS) grants program to increase breast and colorectal cancer screening rates. The initiative funded 68 safety net systems to increase cancer screening through implementation of evidence-based provider and client-oriented strategies. Data are from a mixed-methods evaluation with nine purposively selected safety net systems. Fifty-two interviews were conducted with project leaders, implementers, and ACS staff. Funded safety net systems were categorized into high-, medium-, and low-performing cases based on the level of EBP implementation. Within- and cross-case analyses were performed to identify CFIR constructs that influenced level of EBP implementation. Of 39 CFIR constructs examined, six distinguished levels of implementation. Two constructs were from the intervention characteristics domain: adaptability and trialability. Three were from the inner setting domain: leadership engagement, tension for change, and access to information and knowledge. Engaging formally appointed internal implementation leaders, from the process domain, also distinguished level of implementation. No constructs from the outer setting or individual characteristics domain differentiated systems by level of implementation. Our study identified a number of influential CFIR constructs and illustrated how they impacted EBP implementation across a variety of safety net systems. Findings may inform future dissemination efforts of EBPs for increasing cancer screening in similar settings. Moreover, our analytic approach is similar to previous case studies using CFIR and hence could facilitate comparisons across studies.

Programs That Support Safety and Security for the Transit Industry

DOT National Transportation Integrated Search

2001-03-01

FTA's Office of Safety and Security (Office) directly supports the U.S. Department of Transportation's safety goals through a series of programs designed to maintain continuous improvement in the safety and security of our nation's transit systems. T...

Manned space flight nuclear system safety. Volume 6: Space base nuclear system safety plan

NASA Technical Reports Server (NTRS)

1972-01-01

A qualitative identification of the steps required to assure the incorporation of radiological system safety principles and objectives into all phases of a manned space base program are presented. Specific areas of emphasis include: (1) radiological program management, (2) nuclear system safety plan implementation, (3) impact on program, and (4) summary of the key operation and design guidelines and requirements. The plan clearly indicates the necessity of considering and implementing radiological system safety recommendations as early as possible in the development cycle to assure maximum safety and minimize the impact on design and mission plans.

Safety at work: a meta-analytic investigation of the link between job demands, job resources, burnout, engagement, and safety outcomes.

PubMed

Nahrgang, Jennifer D; Morgeson, Frederick P; Hofmann, David A

2011-01-01

In this article, we develop and meta-analytically test the relationship between job demands and resources and burnout, engagement, and safety outcomes in the workplace. In a meta-analysis of 203 independent samples (N = 186,440), we found support for a health impairment process and for a motivational process as mechanisms through which job demands and resources relate to safety outcomes. In particular, we found that job demands such as risks and hazards and complexity impair employees' health and positively relate to burnout. Likewise, we found support for job resources such as knowledge, autonomy, and a supportive environment motivating employees and positively relating to engagement. Job demands were found to hinder an employee with a negative relationship to engagement, whereas job resources were found to negatively relate to burnout. Finally, we found that burnout was negatively related to working safely but that engagement motivated employees and was positively related to working safely. Across industries, risks and hazards was the most consistent job demand and a supportive environment was the most consistent job resource in terms of explaining variance in burnout, engagement, and safety outcomes. The type of job demand that explained the most variance differed by industry, whereas a supportive environment remained consistent in explaining the most variance in all industries.

Nuclear safety policy working group recommendations on nuclear propulsion safety for the space exploration initiative

NASA Technical Reports Server (NTRS)

Marshall, Albert C.; Lee, James H.; Mcculloch, William H.; Sawyer, J. Charles, Jr.; Bari, Robert A.; Cullingford, Hatice S.; Hardy, Alva C.; Niederauer, George F.; Remp, Kerry; Rice, John W.

1993-01-01

An interagency Nuclear Safety Working Group (NSPWG) was chartered to recommend nuclear safety policy, requirements, and guidelines for the Space Exploration Initiative (SEI) nuclear propulsion program. These recommendations, which are contained in this report, should facilitate the implementation of mission planning and conceptual design studies. The NSPWG has recommended a top-level policy to provide the guiding principles for the development and implementation of the SEI nuclear propulsion safety program. In addition, the NSPWG has reviewed safety issues for nuclear propulsion and recommended top-level safety requirements and guidelines to address these issues. These recommendations should be useful for the development of the program's top-level requirements for safety functions (referred to as Safety Functional Requirements). The safety requirements and guidelines address the following topics: reactor start-up, inadvertent criticality, radiological release and exposure, disposal, entry, safeguards, risk/reliability, operational safety, ground testing, and other considerations.

Curriculum Development and Implementation of a National Interprofessional Fellowship in Patient Safety.

PubMed

Watts, Bradley V; Williams, Linda; Mills, Peter D; Paull, Douglas E; Cully, Jeffrey A; Gilman, Stuart C; Hemphill, Robin R

2018-06-15

Developing a workforce skilled in improving the safety of medical care has often been cited as an important means to achieve safer care. Although some educational programs geared toward patient safety have been developed, few advanced training programs have been described in the literature. We describe the development of a patient safety fellowship program. We describe the development and curriculum of an Interprofessional Fellowship in Patient Safety. The 1-year in residence fellowship focuses on domains such as leadership, spreading innovations, medical improvement, patient safety culture, reliability science, and understanding errors. Specific training in patient safety is available and has been delivered to 48 fellows from a wide range of backgrounds. Fellows have accomplished much in terms of improvement projects, educational innovations, and publications. After completing the fellowship program, fellows are obtaining positions within health-care quality and safety and are likely to make long-term contributions. We offer a curriculum and fellowship design for the topic of patient safety. Available evidence suggests that the fellowship results in the development of patient safety professionals.

National machine guarding program: Part 2. Safety management in small metal fabrication enterprises

PubMed Central

Yamin, Samuel C.; Brosseau, Lisa M.; Xi, Min; Gordon, Robert; Most, Ivan G.; Stanley, Rodney

2015-01-01

Background Small manufacturing businesses often lack important safety programs. Many reasons have been set forth on why this has remained a persistent problem. Methods The National Machine Guarding Program (NMGP) was a nationwide intervention conducted in partnership with two workers' compensation insurers. Insurance safety consultants collected baseline data in 221 business using a 33‐question safety management audit. Audits were completed during an interview with the business owner or manager. Results Most measures of safety management improved with an increasing number of employees. This trend was particularly strong for lockout/tagout. However, size was only significant for businesses without a safety committee. Establishments with a safety committee scored higher (55% vs. 36%) on the safety management audit compared with those lacking a committee (P < 0.0001). Conclusions Critical safety management programs were frequently absent. A safety committee appears to be a more important factor than business size in accounting for differences in outcome measures. Am. J. Ind. Med. 58:1184–1193, 2015. © 2015 The Authors. American Journal of Industrial Medicine Published by Wiley Periodicals, Inc. PMID:26345591

Evaluation of the food safety training for food handlers in restaurant operations

PubMed Central

Park, Sung-Hee; Kwak, Tong-Kyung

2010-01-01

This study examined the extent of improvement of food safety knowledge and practices of employee through food safety training. Employee knowledge and practice for food safety were evaluated before and after the food safety training program. The training program and questionnaires for evaluating employee knowledge and practices concerning food safety, and a checklist for determining food safety performance of restaurants were developed. Data were analyzed using the SPSS program. Twelve restaurants participated in this study. We split them into two groups: the intervention group with training, and the control group without food safety training. Employee knowledge of the intervention group also showed a significant improvement in their score, increasing from 49.3 before the training to 66.6 after training. But in terms of employee practices and the sanitation performance, there were no significant increases after the training. From these results, we recommended that the more job-specific and hand-on training materials for restaurant employees should be developed and more continuous implementation of the food safety training and integration of employee appraisal program with the outcome of safety training were needed. PMID:20198210

External quality-assurance results for the National Atmospheric Deposition Program/National Trends Network during 1991

USGS Publications Warehouse

Nilles, M.A.; Gordon, J.D.; Schroder, L.J.; Paulin, C.E.

1995-01-01

The U.S. Geological Survey used four programs in 1991 to provide external quality assurance for the National Atmospheric Deposition Program/National Trends Network (NADP/NTN). An intersite-comparison program was used to evaluate onsite pH and specific-conductance determinations. The effects of routine sample handling, processing, and shipping of wet-deposition samples on analyte determinations and an estimated precision of analyte values and concentrations were evaluated in the blind-audit program. Differences between analytical results and an estimate of the analytical precision of four laboratories routinely measuring wet deposition were determined by an interlaboratory-comparison program. Overall precision estimates for the precipitation-monitoring system were determined for selected sites by a collocated-sampler program. Results of the intersite-comparison program indicated that 93 and 86 percent of the site operators met the NADP/NTN accuracy goal for pH determinations during the two intersite-comparison studies completed during 1991. The results also indicated that 96 and 97 percent of the site operators met the NADP/NTN accuracy goal for specific-conductance determinations during the two 1991 studies. The effects of routine sample handling, processing, and shipping, determined in the blind-audit program indicated significant positive bias (a=.O 1) for calcium, magnesium, sodium, potassium, chloride, nitrate, and sulfate. Significant negative bias (or=.01) was determined for hydrogen ion and specific conductance. Only ammonium determinations were not biased. A Kruskal-Wallis test indicated that there were no significant (*3t=.01) differences in analytical results from the four laboratories participating in the interlaboratory-comparison program. Results from the collocated-sampler program indicated the median relative error for cation concentration and deposition exceeded eight percent at most sites, whereas the median relative error for sample volume, sulfate, and nitrate concentration at all sites was less than four percent. The median relative error for hydrogen ion concentration and deposition ranged from 4.6 to 18.3 percent at the four sites and as indicated in previous years of the study, was inversely proportional to the acidity of the precipitation at a given site. Overall, collocated-sampling error typically was five times that of laboratory error estimates for most analytes.

25 CFR 170.141 - What Federal funds are available for a tribe's highway safety activities?

Code of Federal Regulations, 2013 CFR

2013-04-01

... program funds under 23 U.S.C. 405; (d) Alcohol traffic safety program funds under 23 U.S.C. 408; (e... from the U.S. Department of Health and Human Services (HHS); (g) Indian Highway Safety Program 25 CFR...

25 CFR 170.141 - What Federal funds are available for a tribe's highway safety activities?

Code of Federal Regulations, 2014 CFR

2014-04-01

... program funds under 23 U.S.C. 405; (d) Alcohol traffic safety program funds under 23 U.S.C. 408; (e... from the U.S. Department of Health and Human Services (HHS); (g) Indian Highway Safety Program 25 CFR...

25 CFR 170.141 - What Federal funds are available for a tribe's highway safety activities?

Code of Federal Regulations, 2012 CFR

2012-04-01

... program funds under 23 U.S.C. 405; (d) Alcohol traffic safety program funds under 23 U.S.C. 408; (e... from the U.S. Department of Health and Human Services (HHS); (g) Indian Highway Safety Program 25 CFR...

23 CFR 1200.10 - Application.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Application. 1200.10 Section 1200.10 Highways NATIONAL... PROCEDURES FOR STATE HIGHWAY SAFETY PROGRAMS UNIFORM PROCEDURES FOR STATE HIGHWAY SAFETY PROGRAMS Application, Approval, and Funding of the Highway Safety Program § 1200.10 Application. Each fiscal year, a State's...

42 CFR 493.801 - Condition: Enrollment and testing of samples.

Code of Federal Regulations, 2013 CFR

2013-10-01

... subpart. (2)(i) Designate the program(s) to be used for each specialty, subspecialty, and analyte or test... procedures, in accordance with § 493.1236(c)(1). (3) For each specialty, subspecialty and analyte or test...

42 CFR 493.801 - Condition: Enrollment and testing of samples.

Code of Federal Regulations, 2012 CFR

2012-10-01

... subpart. (2)(i) Designate the program(s) to be used for each specialty, subspecialty, and analyte or test... procedures, in accordance with § 493.1236(c)(1). (3) For each specialty, subspecialty and analyte or test...

42 CFR 493.801 - Condition: Enrollment and testing of samples.

Code of Federal Regulations, 2010 CFR

2010-10-01

... subpart. (2)(i) Designate the program(s) to be used for each specialty, subspecialty, and analyte or test... procedures, in accordance with § 493.1236(c)(1). (3) For each specialty, subspecialty and analyte or test...

42 CFR 493.801 - Condition: Enrollment and testing of samples.

Code of Federal Regulations, 2011 CFR

2011-10-01

... subpart. (2)(i) Designate the program(s) to be used for each specialty, subspecialty, and analyte or test... procedures, in accordance with § 493.1236(c)(1). (3) For each specialty, subspecialty and analyte or test...

42 CFR 493.801 - Condition: Enrollment and testing of samples.

Code of Federal Regulations, 2014 CFR

2014-10-01

... subpart. (2)(i) Designate the program(s) to be used for each specialty, subspecialty, and analyte or test... procedures, in accordance with § 493.1236(c)(1). (3) For each specialty, subspecialty and analyte or test...

LOVE CANAL MONITORING PROGRAM. VOLUME 1

EPA Science Inventory

This report summarizes the prime contractor activities during the monitoring phase of the Love Canal project. Since GCA Corporation was only responsible for data collection, no analytical results appear in this report. The program involved a multifaceted sampling and analytical e...

Commercial Earth Observation

NASA Technical Reports Server (NTRS)

1995-01-01

Through the Earth Observation Commercial Applications Program (EOCAP) at Stennis Space Center, Applied Analysis, Inc. developed a new tool for analyzing remotely sensed data. The Applied Analysis Spectral Analytical Process (AASAP) detects or classifies objects smaller than a pixel and removes the background. This significantly enhances the discrimination among surface features in imagery. ERDAS, Inc. offers the system as a modular addition to its ERDAS IMAGINE software package for remote sensing applications. EOCAP is a government/industry cooperative program designed to encourage commercial applications of remote sensing. Projects can run three years or more and funding is shared by NASA and the private sector participant. Through the Earth Observation Commercial Applications Program (EOCAP), Ocean and Coastal Environmental Sensing (OCENS) developed SeaStation for marine users. SeaStation is a low-cost, portable, shipboard satellite groundstation integrated with vessel catch and product monitoring software. Linked to the Global Positioning System, SeaStation provides real time relationships between vessel position and data such as sea surface temperature, weather conditions and ice edge location. This allows the user to increase fishing productivity and improve vessel safety. EOCAP is a government/industry cooperative program designed to encourage commercial applications of remote sensing. Projects can run three years or more and funding is shared by NASA and the private sector participant.

Effectiveness of landowner assistance activities: an examination of the USDA Forest Service's Forest Stewardship Program

Treesearch

Brett J. Butler; Marla Markowski-Lindsay; Stephanie Snyder; Paul Catanzaro; David B. Kittredge; Kyle Andrejczyk; Brenton J. Dickinson; Derya Eryilmaz; Jaketon H. Hewes; Paula Randler; Donna Tadle; Michael A. Kilgore

2014-01-01

The USDA Forest Service's Forest Stewardship Program (FSP) is the nation's most prominent private forestry assistance program. We examined the FSP using a multiple analytic approach: analysis of annual FSP accomplishments, survey of state FSP coordinators, analytic comparison of family forest owners receiving and not receiving forestry practice assistance,...

An evaluation of an airline cabin safety education program for elementary school children.

PubMed

Liao, Meng-Yuan

2014-04-01

The knowledge, attitude, and behavior intentions of elementary school students about airline cabin safety before and after they took a specially designed safety education course were examined. A safety education program was designed for school-age children based on the cabin safety briefings airlines given to their passengers, as well as on lessons learned from emergency evacuations. The course is presented in three modes: a lecture, a demonstration, and then a film. A two-step survey was used for this empirical study: an illustrated multiple-choice questionnaire before the program, and, upon completion, the same questionnaire to assess its effectiveness. Before the program, there were significant differences in knowledge and attitude based on school locations and the frequency that students had traveled by air. After the course, students showed significant improvement in safety knowledge, attitude, and their behavior intention toward safety. Demographic factors, such as gender and grade, also affected the effectiveness of safety education. The study also showed that having the instructor directly interact with students by lecturing is far more effective than presenting the information using only video media. A long-term evaluation, the effectiveness of the program, using TV or video accessible on the Internet to deliver a cabin safety program, and a control group to eliminate potential extraneous factors are suggested for future studies. Copyright © 2013 Elsevier Ltd. All rights reserved.

Analytical Chemistry Laboratory Progress Report for FY 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

Green, D.W.; Boparai, A.S.; Bowers, D.L.

The purpose of this report is to summarize the activities of the Analytical Chemistry Laboratory (ACL) at Argonne National Laboratory (ANL) for Fiscal Year (FY) 1994 (October 1993 through September 1994). This annual report is the eleventh for the ACL and describes continuing effort on projects, work on new projects, and contributions of the ACL staff to various programs at ANL. The Analytical Chemistry Laboratory is a full-cost-recovery service center, with the primary mission of providing a broad range of analytical chemistry support services to the scientific and engineering programs at ANL. The ACL also has a research program inmore » analytical chemistry, conducts instrumental and methods development, and provides analytical services for governmental, educational, and industrial organizations. The ACL handles a wide range of analytical problems. Some routine or standard analyses are done, but it is common for the Argonne programs to generate unique problems that require significant development of methods and adaption of techniques to obtain useful analytical data. The ACL has four technical groups -- Chemical Analysis, Instrumental Analysis, Organic Analysis, and Environmental Analysis -- which together include about 45 technical staff members. Talents and interests of staff members cross the group lines, as do many projects within the ACL. The Chemical Analysis Group uses wet- chemical and instrumental methods for elemental, compositional, and isotopic determinations in solid, liquid, and gaseous samples and provides specialized analytical services. Major instruments in this group include an ion chromatograph (IC), an inductively coupled plasma/atomic emission spectrometer (ICP/AES), spectrophotometers, mass spectrometers (including gas-analysis and thermal-ionization mass spectrometers), emission spectrographs, autotitrators, sulfur and carbon determinators, and a kinetic phosphorescence uranium analyzer.« less

A consortium-driven framework to guide the implementation of ICH M7 Option 4 control strategies.

PubMed

Barber, Chris; Antonucci, Vincent; Baumann, Jens-Christoph; Brown, Roland; Covey-Crump, Elizabeth; Elder, David; Elliott, Eric; Fennell, Jared W; Gallou, Fabrice; Ide, Nathan D; Jordine, Guido; Kallemeyn, Jeffrey M; Lauwers, Dirk; Looker, Adam R; Lovelle, Lucie E; McLaughlin, Mark; Molzahn, Robert; Ott, Martin; Schils, Didier; Oestrich, Rolf Schulte; Stevenson, Neil; Talavera, Pere; Teasdale, Andrew; Urquhart, Michael W; Varie, David L; Welch, Dennie

2017-11-01

The ICH M7 Option 4 control of (potentially) mutagenic impurities is based on the use of scientific principles in lieu of routine analytical testing. This approach can reduce the burden of analytical testing without compromising patient safety, provided a scientifically rigorous approach is taken which is backed up by sufficient theoretical and/or analytical data. This paper introduces a consortium-led initiative and offers a proposal on the supporting evidence that could be presented in regulatory submissions. Copyright © 2017 Elsevier Inc. All rights reserved.

Safety pilot model deployment : lessons learned and recommendations for future connected vehicle activities.

DOT National Transportation Integrated Search

2015-09-01

The Connected Vehicle Safety Pilot was a research program that demonstrated the readiness of DSRC-based connected vehicle safety applications for nationwide deployment. The vision of the Connected Vehicle Safety Pilot Program was to test connected ve...

76 FR 74723 - New Car Assessment Program (NCAP); Safety Labeling

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-01

... DEPARTMENT OF TRANSPORTATION National Highway Traffic Safety Administration 49 CFR Part 575 [Docket No. NHTSA 2010-0025] RIN 2127-AK51 New Car Assessment Program (NCAP); Safety Labeling AGENCY: National Highway Traffic Safety Administration (NHTSA), Department of Transportation (DOT). ACTION...

School Bus Fleet Safety: Planning and Development.

ERIC Educational Resources Information Center

Bieber, Robert M.

1984-01-01

To ensure worker safety, fleet safety managers need professional staffs, good access to top management, and sufficient authority to discharge their duties. Safety programs should include careful driver hiring; training, including orientation, testing, and practice; comprehensive accident reporting; and cooperative compliance programs with…

The Impact of a Patient Safety Program on Medical Error Reporting

DTIC Science & Technology

2005-05-01

307 The Impact of a Patient Safety Program on Medical Error Reporting Donald R. Woolever Abstract Background: In response to the occurrence of...a sentinel event—a medical error with serious consequences—Eglin U.S. Air Force (USAF) Regional Hospital developed and implemented a patient safety...communication, teamwork, and reporting. Objective: To determine the impact of a patient safety program on patterns of medical error reporting. Methods: This

Evaluation of the electrochemical O2 concentrator as an O2 compressor

NASA Technical Reports Server (NTRS)

Marshall, R. D.; Carlson, J. N.

1975-01-01

A program was successfully completed to analytically and experimentally evaluate the feasibility of using an electrochemical oxygen (O2) concentrator as an O2 compressor. The electrochemical O2 compressor (EOC) compresses 345 kN/sq m (50 psia) O2 generated on board the space vehicle by the water electrolysis subsystem (WES) in a single stage to 20,700 kN/sq m (3000 psia) to refill spent extravehicular equipment O2 bottles and to eliminate the need for high pressure O2 storage. The single cell EOC designed, fabricated, and used for the feasibility testing is capable of being tested at O2 pressures up to 41,400 kN/sq m (6000 psia). A ground support test facility to test the EOC cell was designed, fabricated, and used for the EOC feasibility testing. A product assurance program was established, implemented, and maintained which emphasized safety and materials compatibility associated with high pressure O2 operation. A membrane development program was conducted to develop a membrane for EOC application. Data obtained using a commercially available membrane were used to guide the development of the membranes fabricated specifically for an EOC. A total of 15 membranes were fabricated.

SPLASH program for three dimensional fluid dynamics with free surface boundaries

NASA Astrophysics Data System (ADS)

Yamaguchi, A.

1996-05-01

This paper describes a three dimensional computer program SPLASH that solves Navier-Stokes equations based on the Arbitrary Lagrangian Eulerian (ALE) finite element method. SPLASH has been developed for application to the fluid dynamics problems including the moving boundary of a liquid metal cooled Fast Breeder Reactor (FBR). To apply SPLASH code to the free surface behavior analysis, a capillary model using a cubic Spline function has been developed. Several sample problems, e.g., free surface oscillation, vortex shedding development, and capillary tube phenomena, are solved to verify the computer program. In the analyses, the numerical results are in good agreement with the theoretical value or experimental observance. Also SPLASH code has been applied to an analysis of a free surface sloshing experiment coupled with forced circulation flow in a rectangular tank. This is a simplified situation of the flow field in a reactor vessel of the FBR. The computational simulation well predicts the general behavior of the fluid flow inside and the free surface behavior. Analytical capability of the SPLASH code has been verified in this study and the application to more practical problems such as FBR design and safety analysis is under way.

Managing Large Scale Project Analysis Teams through a Web Accessible Database

NASA Technical Reports Server (NTRS)

O'Neil, Daniel A.

2008-01-01

Large scale space programs analyze thousands of requirements while mitigating safety, performance, schedule, and cost risks. These efforts involve a variety of roles with interdependent use cases and goals. For example, study managers and facilitators identify ground-rules and assumptions for a collection of studies required for a program or project milestone. Task leaders derive product requirements from the ground rules and assumptions and describe activities to produce needed analytical products. Disciplined specialists produce the specified products and load results into a file management system. Organizational and project managers provide the personnel and funds to conduct the tasks. Each role has responsibilities to establish information linkages and provide status reports to management. Projects conduct design and analysis cycles to refine designs to meet the requirements and implement risk mitigation plans. At the program level, integrated design and analysis cycles studies are conducted to eliminate every 'to-be-determined' and develop plans to mitigate every risk. At the agency level, strategic studies analyze different approaches to exploration architectures and campaigns. This paper describes a web-accessible database developed by NASA to coordinate and manage tasks at three organizational levels. Other topics in this paper cover integration technologies and techniques for process modeling and enterprise architectures.

Development of a safety communication and recognition program for construction.

PubMed

Sparer, Emily H; Herrick, Robert F; Dennerlein, Jack T

2015-05-01

Leading-indicator-based (e.g., hazard recognition) incentive programs provide an alternative to controversial lagging-indicator-based (e.g., injury rates) programs. We designed a leading-indicator-based safety communication and recognition program that incentivized safe working conditions. The program was piloted for two months on a commercial construction worksite and then redesigned using qualitative interview and focus group data from management and workers. We then ran the redesigned program for six months on the same worksite. Foremen received detailed weekly feedback from safety inspections, and posters displayed worksite and subcontractor safety scores. In the final program design, the whole site, not individual subcontractors, was the unit of analysis and recognition. This received high levels of acceptance from workers, who noted increased levels of site unity and team-building. This pilot program showed that construction workers value solidarity with others on site, demonstrating the importance of health and safety programs that engage all workers through a reliable and consistent communication infrastructure. © The Author(s) 2015 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Workplace Skills Taught in a Simulated Analytical Department

NASA Astrophysics Data System (ADS)

Sonchik Marine, Susan

2001-11-01

Integration of workplace skills into the academic setting is paramount for any chemical technology program. In addition to the expected chemistry content, courses must build proficiency in oral and written communication skills, computer skills, laboratory safety, and logical troubleshooting. Miami University's Chemical Technology II course is set up as a contract analytical laboratory. Students apply the advanced sampling techniques, quality assurance, standard methods, and statistical analyses they have studied. For further integration of workplace skills, weekly "department meetings" are held where the student, as members of the department, report on their work in process, present completed projects, and share what they have learned and what problems they have encountered. Information is shared between the experienced members of the department and those encountering problems or starting a new project. The instructor as department manager makes announcements, reviews company and department status, and assigns work for the coming week. The department members report results to clients in formal reports or in short memos. Factors affecting the success of the "department meeting" approach include the formality of the meeting room, use of an official agenda, the frequency, time, and duration of the meeting, and accountability of the students.

41 CFR 128-1.8009 - Review of Seismic Safety Program.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Review of Seismic Safety Program. 128-1.8009 Section 128-1.8009 Public Contracts and Property Management Federal Property Management Regulations System (Continued) DEPARTMENT OF JUSTICE 1-INTRODUCTION 1.80-Seismic Safety Program...

14 CFR 91.25 - Aviation Safety Reporting Program: Prohibition against use of reports for enforcement purposes.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 2 2011-01-01 2011-01-01 false Aviation Safety Reporting Program... AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR TRAFFIC AND GENERAL OPERATING RULES GENERAL OPERATING AND FLIGHT RULES General § 91.25 Aviation Safety Reporting Program: Prohibition against...

14 CFR 91.25 - Aviation Safety Reporting Program: Prohibition against use of reports for enforcement purposes.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 2 2012-01-01 2012-01-01 false Aviation Safety Reporting Program... AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR TRAFFIC AND GENERAL OPERATING RULES GENERAL OPERATING AND FLIGHT RULES General § 91.25 Aviation Safety Reporting Program: Prohibition against...

14 CFR 91.25 - Aviation Safety Reporting Program: Prohibition against use of reports for enforcement purposes.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 2 2014-01-01 2014-01-01 false Aviation Safety Reporting Program... AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR TRAFFIC AND GENERAL OPERATING RULES GENERAL OPERATING AND FLIGHT RULES General § 91.25 Aviation Safety Reporting Program: Prohibition against...

14 CFR 91.25 - Aviation Safety Reporting Program: Prohibition against use of reports for enforcement purposes.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 2 2013-01-01 2013-01-01 false Aviation Safety Reporting Program... AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR TRAFFIC AND GENERAL OPERATING RULES GENERAL OPERATING AND FLIGHT RULES General § 91.25 Aviation Safety Reporting Program: Prohibition against...

75 FR 15484 - Railroad Safety Technology Program Grant Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-29

... governments for projects that have a public benefit of improved railroad safety and efficiency. The program... State and local governments for projects * * * that have a public benefit of improved safety and network... minimum 20 percent grantee cost share (cash or in-kind) match requirement. DATES: FRA will begin accepting...

23 CFR 1200.26 - Non-compliance.

Code of Federal Regulations, 2010 CFR

2010-04-01

... TRANSPORTATION PROCEDURES FOR STATE HIGHWAY SAFETY PROGRAMS UNIFORM PROCEDURES FOR STATE HIGHWAY SAFETY PROGRAMS Implementation and Management of the Highway Safety Program § 1200.26 Non-compliance. Where a State is found to... special conditions for high-risk grantees and the enforcement procedures of 49 CFR part 18, or the...

Applying health education theory to patient safety programs: three case studies.

PubMed

Gilkey, Melissa B; Earp, Jo Anne L; French, Elizabeth A

2008-04-01

Program planning for patient safety is challenging because intervention-oriented surveillance data are not yet widely available to those working in this nascent field. Even so, health educators are uniquely positioned to contribute to patient safety intervention efforts because their theoretical training provides them with a guide for designing and implementing prevention programs. This article demonstrates the utility of applying health education concepts from three prominent patient safety campaigns, including the concepts of risk perception, community participation, and social marketing. The application of these theoretical concepts to patient safety programs suggests that health educators possess a knowledge base and skill set highly relevant to patient safety and that their perspective should be increasingly brought to bear on the design and evaluation of interventions that aim to protect patients from preventable medical error.

Analysis of System-Wide Investment in the National Airspace System: A Portfolio Analytical Framework and an Example

NASA Technical Reports Server (NTRS)

Bhadra, Dipasis; Morser, Frederick R.

2006-01-01

In this paper, the authors review the FAA s current program investments and lay out a preliminary analytical framework to undertake projects that may address some of the noted deficiencies. By drawing upon the well developed theories from corporate finance, an analytical framework is offered that can be used for choosing FAA s investments taking into account risk, expected returns and inherent dependencies across NAS programs. The framework can be expanded into taking multiple assets and realistic values for parameters in drawing an efficient risk-return frontier for the entire FAA investment programs.

A review of selected inorganic surface water quality-monitoring practices: are we really measuring what we think, and if so, are we doing it right?

USGS Publications Warehouse

Horowitz, Arthur J.

2013-01-01

Successful environmental/water quality-monitoring programs usually require a balance between analytical capabilities, the collection and preservation of representative samples, and available financial/personnel resources. Due to current economic conditions, monitoring programs are under increasing pressure to do more with less. Hence, a review of current sampling and analytical methodologies, and some of the underlying assumptions that form the bases for these programs seems appropriate, to see if they are achieving their intended objectives within acceptable error limits and/or measurement uncertainty, in a cost-effective manner. That evaluation appears to indicate that several common sampling/processing/analytical procedures (e.g., dip (point) samples/measurements, nitrogen determinations, total recoverable analytical procedures) are generating biased or nonrepresentative data, and that some of the underlying assumptions relative to current programs, such as calendar-based sampling and stationarity are no longer defensible. The extensive use of statistical models as well as surrogates (e.g., turbidity) also needs to be re-examined because the hydrologic interrelationships that support their use tend to be dynamic rather than static. As a result, a number of monitoring programs may need redesigning, some sampling and analytical procedures may need to be updated, and model/surrogate interrelationships may require recalibration.

Developing Healthcare Data Analytics APPs with Open Data Science Tools.

PubMed

Hao, Bibo; Sun, Wen; Yu, Yiqin; Xie, Guotong

2017-01-01

Recent advances in big data analytics provide more flexible, efficient, and open tools for researchers to gain insight from healthcare data. Whilst many tools require researchers to develop programs with programming languages like Python, R and so on, which is not a skill set grasped by many researchers in the healthcare data analytics area. To make data science more approachable, we explored existing tools and developed a practice that can help data scientists convert existing analytics pipelines to user-friendly analytics APPs with rich interactions and features of real-time analysis. With this practice, data scientists can develop customized analytics pipelines as APPs in Jupyter Notebook and disseminate them to other researchers easily, and researchers can benefit from the shared notebook to perform analysis tasks or reproduce research results much more easily.

Safety in the Chemical Laboratory: Safety in the Chemistry Laboratories: A Specific Program.

ERIC Educational Resources Information Center

Corkern, Walter H.; Munchausen, Linda L.

1983-01-01

Describes a safety program adopted by Southeastern Louisiana University. Students are given detailed instructions on laboratory safety during the first laboratory period and a test which must be completely correct before they are allowed to return to the laboratory. Test questions, list of safety rules, and a laboratory accident report form are…

Development of a master file of essential highway safety planning and evaluation data.

DOT National Transportation Integrated Search

1978-01-01

The National Highway Traffic Safety Administration requires each state to file an Annual Highway Safety Work Program as a prerequisite for obtaining federal section 402 safety monies. However, the work program serves as more than a mechanism for obta...

16 CFR 1209.33 - Reasonable testing program.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 1209.33 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS INTERIM SAFETY STANDARD FOR CELLULOSE INSULATION Certification § 1209.33 Reasonable testing program. (a) General. Section 14(a) of the Consumer Product Safety Act (15 U.S.C. 2063(a)) requires each manufacturer...

48 CFR 923.7001 - Nuclear safety.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 5 2012-10-01 2012-10-01 false Nuclear safety. 923.7001 Section 923.7001 Federal Acquisition Regulations System DEPARTMENT OF ENERGY SOCIOECONOMIC PROGRAMS... Programs 923.7001 Nuclear safety. The DOE regulates the nuclear safety of its major facilities under its...

48 CFR 923.7001 - Nuclear safety.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 5 2014-10-01 2014-10-01 false Nuclear safety. 923.7001 Section 923.7001 Federal Acquisition Regulations System DEPARTMENT OF ENERGY SOCIOECONOMIC PROGRAMS... Programs 923.7001 Nuclear safety. The DOE regulates the nuclear safety of its major facilities under its...

48 CFR 923.7001 - Nuclear safety.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false Nuclear safety. 923.7001 Section 923.7001 Federal Acquisition Regulations System DEPARTMENT OF ENERGY SOCIOECONOMIC PROGRAMS... Programs 923.7001 Nuclear safety. The DOE regulates the nuclear safety of its major facilities under its...

48 CFR 923.7001 - Nuclear safety.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Nuclear safety. 923.7001 Section 923.7001 Federal Acquisition Regulations System DEPARTMENT OF ENERGY SOCIOECONOMIC PROGRAMS... Programs 923.7001 Nuclear safety. The DOE regulates the nuclear safety of its major facilities under its...

Tiger Team Assessment of the Los Alamos National Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1991-11-01

The purpose of the safety and health assessment was to determine the effectiveness of representative safety and health programs at the Los Alamos National Laboratory (LANL). Within the safety and health programs at LANL, performance was assessed in the following technical areas: Organization and Administration, Quality Verification, Operations, Maintenance, Training and Certification, Auxiliary Systems, Emergency Preparedness, Technical Support, Packaging and Transportation, Nuclear Criticality Safety, Security/Safety Interface, Experimental Activities, Site/Facility Safety Review, Radiological Protection, Personnel Protection, Worker Safety and Health (OSHA) Compliance, Fire Protection, Aviation Safety, Explosives Safety, Natural Phenomena, and Medical Services.

Obtaining Valid Safety Data for Software Safety Measurement and Process Improvement

NASA Technical Reports Server (NTRS)

Basili, Victor r.; Zelkowitz, Marvin V.; Layman, Lucas; Dangle, Kathleen; Diep, Madeline

2010-01-01

We report on a preliminary case study to examine software safety risk in the early design phase of the NASA Constellation spaceflight program. Our goal is to provide NASA quality assurance managers with information regarding the ongoing state of software safety across the program. We examined 154 hazard reports created during the preliminary design phase of three major flight hardware systems within the Constellation program. Our purpose was two-fold: 1) to quantify the relative importance of software with respect to system safety; and 2) to identify potential risks due to incorrect application of the safety process, deficiencies in the safety process, or the lack of a defined process. One early outcome of this work was to show that there are structural deficiencies in collecting valid safety data that make software safety different from hardware safety. In our conclusions we present some of these deficiencies.

Apollo Quality Program.

PubMed

Sibal, Anupam; Dewan, Shaveta; Uberoi, R S; Kar, Sujoy; Loria, Gaurav; Fernandes, Clive; Yatheesh, G; Sharma, Karan

2012-01-01

Ensuring patient safety is a vital step for any hospital in achieving the best clinical outcomes. The Apollo Quality Program aimed at standardization of processes for clinical handovers, medication safety, surgical safety, patient identification, verbal orders, hand washing compliance and falls prevention across the hospitals in the Group. Thirty-two hospitals across the Group in settings varying from rural to semi urban, urban and metropolitan implemented the program and over a period of one year demonstrated a visible improvement in the compliance to processes for patient safety translating into better patient safety statistics.

Report on the U.S. Geological Survey's evaluation program for standard reference samples distributed in October 1993 : T-127 (trace constituents), M-128 (major constituents), N-40 (nutrients), N-41 (nutrients), P-21 (low ionic strength), Hg-17 (mercury), AMW-3 (acid mine water), and WW-1 (whole water)

USGS Publications Warehouse

Long, H.K.; Farrar, J.W.

1994-01-01

This report presents the results of the U.S. Geological Survey's analytical evaluation program for eight standard reference samples--T-127 (trace constituents), M-128 (major constituents), N-40 (nutrients), N-41 (nutrients), P-21 (low ionic strength), Hg-17 (mercury), AMW-3 (acid mine water), and WW-1 (whole water)--that were distributed in October 1993 to 158 laboratories registered in the U.S. Geological Survey sponsored interlaboratory testing program. Analytical data that were received from 145 of the laboratories were evaluated with respect to: overall laboratory performance and relative laboratory performance for each analyte in the eight reference samples. Results of these evaluations are presented in tabular form. Also presented are tables and graphs summarizing the analytical data provided by each laboratory for each analyte in the eight standard reference samples. The most probable value for each analyte was determined using nonparametric statistics.

Report on the U.S. Geological Survey's evaluation program for standard reference samples distributed in October 1994 : T-131 (trace constituents), T-133 (trace constituents), M-132 (major constituents), N-43 (nutrients), N-44 (nutrients), P-23 (low ionic strength) and Hg-19 (mercury)

USGS Publications Warehouse

Long, H. Keith; Farrar, Jerry W.

1995-01-01

This report presents the results of the U.S. Geological Survey's analytical evaluation program for 7 standard reference samples--T-131 (trace constituents), T-133 (trace constituents), M-132 (major constituents), N-43 (nutrients), N-44 (nutrients), P-23 (low ionic strength), and Hg-19 (mercury). The samples were distributed in October 1994 to 131 laboratories registered in the U.S. Geological Survey sponsored interlaboratory testing program. Analytical data that were received from 121 of the laboratories were evaluated with respect to: overall laboratory performance and relative laboratory performance for each analyte in the seven reference samples. Results of these evaluations are presented in tabular form. Also presented are tables and graphs summarizing the analytical data provided by each laboratory for each analyte in the seven standard reference samples. The most probable value for each analyte was determined using nonparametric statistics.

The transfer of safety training in work organizations: a systems perspective to continuous learning.

PubMed

Ford, J K; Fisher, S

1994-01-01

The effectiveness of safety and health programs can be evaluated from a "transfer" perspective, which evaluates the effectiveness of training in individual programs, and from a "systems" perspective that contends that a safety training program cannot be isolated from the organizational system of which it is a part. This chapter explores the effectiveness of training from a systems perspective and includes recommendations for improving safety and health training.

WAG 2 remedial investigation and site investigation site-specific work plan/health and safety checklist for the soil and sediment task. Environmental Restoration Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holt, V.L.; Burgoa, B.B.

1993-12-01

This document is a site-specific work plan/health and safety checklist (WP/HSC) for a task of the Waste Area Grouping 2 Remedial Investigation and Site Investigation (WAG 2 RI&SI). Title 29 CFR Part 1910.120 requires that a health and safety program plan that includes site- and task-specific information be completed to ensure conformance with health- and safety-related requirements. To meet this requirement, the health and safety program plan for each WAG 2 RI&SI field task must include (1) the general health and safety program plan for all WAG 2 RI&SI field activities and (2) a WP/HSC for that particular field task.more » These two components, along with all applicable referenced procedures, must be kept together at the work site and distributed to field personnel as required. The general health and safety program plan is the Health and Safety Plan for the Remedial Investigation and Site Investigation of Waste Area Grouping 2 at the Oak Ridge National Laboratory, Oak Ridge, Tennessee (ORNL/ER-169). The WP/HSCs are being issued as supplements to ORNL/ER-169.« less

Safety coaches in radiology: decreasing human error and minimizing patient harm.

PubMed

Dickerson, Julie M; Koch, Bernadette L; Adams, Janet M; Goodfriend, Martha A; Donnelly, Lane F

2010-09-01

Successful programs to improve patient safety require a component aimed at improving safety culture and environment, resulting in a reduced number of human errors that could lead to patient harm. Safety coaching provides peer accountability. It involves observing for safety behaviors and use of error prevention techniques and provides immediate feedback. For more than a decade, behavior-based safety coaching has been a successful strategy for reducing error within the context of occupational safety in industry. We describe the use of safety coaches in radiology. Safety coaches are an important component of our comprehensive patient safety program.

An analytical approach to thermal modeling of Bridgman type crystal growth: One dimensional analysis. Computer program users manual

NASA Technical Reports Server (NTRS)

Cothran, E. K.

1982-01-01

The computer program written in support of one dimensional analytical approach to thermal modeling of Bridgman type crystal growth is presented. The program listing and flow charts are included, along with the complete thermal model. Sample problems include detailed comments on input and output to aid the first time user.

DEMONSTRATION BULLETIN: FIELD ANALYTICAL SCREENING PROGRAM: PCB METHOD - U.S. ENVIRONMENTAL PROTECTION AGENCY

EPA Science Inventory

The field analytical screening program (FASP) polychlorinated biphenyl (PCB) method uses a temperature-programmable gas chromatograph (GC) equipped with an electron capture detector (ECD) to identify and quantify PCBs. Gas chromatography is an EPA-approved method for determi...

FIELD ANALYTICAL SCREENING PROGRAM: PCP METHOD - INNOVATIVE TECHNOLOGY EVALUATION REPORT

EPA Science Inventory

The Field Analytical Screening Program (FASP) pentachlorophenol (PCP) method uses a gas chromatograph (GC) equipped with a megabore capillary column and flame ionization detector (FID) and electron capture detector (ECD) to identify and quantify PCP. The FASP PCP method is design...

Synthesizing Safety Conditions for Code Certification Using Meta-Level Programming

NASA Technical Reports Server (NTRS)

Eusterbrock, Jutta

2004-01-01

In code certification the code consumer publishes a safety policy and the code producer generates a proof that the produced code is in compliance with the published safety policy. In this paper, a novel viewpoint approach towards an implementational re-use oriented framework for code certification is taken. It adopts ingredients from Necula's approach for proof-carrying code, but in this work safety properties can be analyzed on a higher code level than assembly language instructions. It consists of three parts: (1) The specification language is extended to include generic pre-conditions that shall ensure safety at all states that can be reached during program execution. Actual safety requirements can be expressed by providing domain-specific definitions for the generic predicates which act as interface to the environment. (2) The Floyd-Hoare inductive assertion method is refined to obtain proof rules that allow the derivation of the proof obligations in terms of the generic safety predicates. (3) A meta-interpreter is designed and experimentally implemented that enables automatic synthesis of proof obligations for submitted programs by applying the modified Floyd-Hoare rules. The proof obligations have two separate conjuncts, one for functional correctness and another for the generic safety obligations. Proof of the generic obligations, having provided the actual safety definitions as context, ensures domain-specific safety of program execution in a particular environment and is simpler than full program verification.

Vaccine safety monitoring systems in developing countries: an example of the Vietnam model.

PubMed

Ali, Mohammad; Rath, Barbara; Thiem, Vu Dinh

2015-01-01

Only few health intervention programs have been as successful as vaccination programs with respect to preventing morbidity and mortality in developing countries. However, the success of a vaccination program is threatened by rumors and misunderstanding about the risks of vaccines. It is short-sighted to plan the introduction of vaccines into developing countries unless effective vaccine safety monitoring systems are in place. Such systems that track adverse events following immunization (AEFI) is currently lacking in most developing countries. Therefore, any rumor may affect the entire vaccination program. Public health authorities should implement the safety monitoring system of vaccines, and disseminate safety issues in a proactive mode. Effective safety surveillance systems should allow for the conduct of both traditional and alternative epidemiologic studies through the use of prospective data sets. The vaccine safety data link implemented in Vietnam in mid-2002 indicates that it is feasible to establish a vaccine safety monitoring system for the communication of vaccine safety in developing countries. The data link provided the investigators an opportunity to evaluate AEFI related to measles vaccine. Implementing such vaccine safety monitoring system is useful in all developing countries. The system should be able to make objective and clear communication regarding safety issues of vaccines, and the data should be reported to the public on a regular basis for maintaining their confidence in vaccination programs.

Quality control analytical methods: refractive index.

PubMed

Allen, Loyd V

2015-01-01

There are numerous analytical methods that can be utilized in a compounding pharmacy for a quality-assurance program. Since the index of refraction of a liquid/solution is a physical constant, it can be used to assist in identification of a substance, establish its purity, and, in some instances, to determine the concentration of an analyte in solution. This article serves as an introduction to refractive index and some applications of its use in a compounding program.

75 FR 44051 - Resolicitation of Applications for the Railroad Safety Technology Program Grant Program (RS-TEC...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-27

... have a public benefit of improved railroad safety and efficiency. The program makes available $50... projects * * * that have a public benefit of improved safety and network efficiency.'' To be eligible for... percent grantee, cost share (cash or in-kind) requirement. Applications that do not clearly indicate at...

75 FR 8239 - School Food Safety Program Based on Hazard Analysis and Critical Control Point Principles (HACCP...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-24

... 0584-AD65 School Food Safety Program Based on Hazard Analysis and Critical Control Point Principles... Safety Program Based on Hazard Analysis and Critical Control Point Principles (HACCP) was published on... of Management and Budget (OMB) cleared the associated information collection requirements (ICR) on...

Loss Prevention through Safety Belt Use: A Handbook for Managers.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

This handbook is designed to help managers address safety belt usage issues through a cost-effective and direct approach--establishing an employee safety belt program. The handbook offers a hands-on guide for conducting the program and provides for implementation at all levels. The handbook contains cost information, a program overview, policy and…

NASA Aviation Safety Program Systems Analysis/Program Assessment Metrics Review

NASA Technical Reports Server (NTRS)

Louis, Garrick E.; Anderson, Katherine; Ahmad, Tisan; Bouabid, Ali; Siriwardana, Maya; Guilbaud, Patrick

2003-01-01

The goal of this project is to evaluate the metrics and processes used by NASA's Aviation Safety Program in assessing technologies that contribute to NASA's aviation safety goals. There were three objectives for reaching this goal. First, NASA's main objectives for aviation safety were documented and their consistency was checked against the main objectives of the Aviation Safety Program. Next, the metrics used for technology investment by the Program Assessment function of AvSP were evaluated. Finally, other metrics that could be used by the Program Assessment Team (PAT) were identified and evaluated. This investigation revealed that the objectives are in fact consistent across organizational levels at NASA and with the FAA. Some of the major issues discussed in this study which should be further investigated, are the removal of the Cost and Return-on-Investment metrics, the lack of the metrics to measure the balance of investment and technology, the interdependencies between some of the metric risk driver categories, and the conflict between 'fatal accident rate' and 'accident rate' in the language of the Aviation Safety goal as stated in different sources.

Continuous-time safety-first portfolio selection with jump-diffusion processes

NASA Astrophysics Data System (ADS)

Yan, Wei

2012-04-01

This article is concerned with continuous-time portfolio selection based on a safety-first criterion under discontinuous price processes (jump-diffusion processes). The solution of the corresponding Hamilton-Jacobi-Bellman equation of the problem is demonstrated. The analytical solutions are presented when there does not exist any riskless asset. Moreover, the problem is also discussed while there exists one riskless asset.

An initial investigation into methods of computing transonic aerodynamic sensitivity coefficients

NASA Technical Reports Server (NTRS)

Carlson, Leland A.

1991-01-01

The three dimensional quasi-analytical sensitivity analysis and the ancillary driver programs are developed needed to carry out the studies and perform comparisons. The code is essentially contained in one unified package which includes the following: (1) a three dimensional transonic wing analysis program (ZEBRA); (2) a quasi-analytical portion which determines the matrix elements in the quasi-analytical equations; (3) a method for computing the sensitivity coefficients from the resulting quasi-analytical equations; (4) a package to determine for comparison purposes sensitivity coefficients via the finite difference approach; and (5) a graphics package.

Final safety analysis report for the Ground Test Accelerator (GTA), Phase 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1994-10-01

This document is the second volume of a 3 volume safety analysis report on the Ground Test Accelerator (GTA). The GTA program at the Los Alamos National Laboratory (LANL) is the major element of the national Neutral Particle Beam (NPB) program, which is supported by the Strategic Defense Initiative Office (SDIO). A principal goal of the national NPB program is to assess the feasibility of using hydrogen and deuterium neutral particle beams outside the Earth`s atmosphere. The main effort of the NPB program at Los Alamos concentrates on developing the GTA. The GTA is classified as a low-hazard facility, exceptmore » for the cryogenic-cooling system, which is classified as a moderate-hazard facility. This volume consists of failure modes and effects analysis; accident analysis; operational safety requirements; quality assurance program; ES&H management program; environmental, safety, and health systems critical to safety; summary of waste-management program; environmental monitoring program; facility expansion, decontamination, and decommissioning; summary of emergency response plan; summary plan for employee training; summary plan for operating procedures; glossary; and appendices A and B.« less

WHAEM: PROGRAM DOCUMENTATION FOR THE WELLHEAD ANALYTIC ELEMENT MODEL

EPA Science Inventory

The Wellhead Analytic Element Model (WhAEM) demonstrates a new technique for the definition of time-of-travel capture zones in relatively simple geohydrologic settings. he WhAEM package includes an analytic element model that uses superposition of (many) analytic solutions to gen...

2012 NASA Range Safety Annual Report

NASA Technical Reports Server (NTRS)

Dumont, Alan G.

2012-01-01

This report provides a NASA Range Safety (NRS) overview for current and potential range users. This report contains articles which cover a variety of subject areas, summaries of various NASA Range Safety Program (RSP) activities performed during the past year, links to past reports, and information on several projects that may have a profound impact on the way business will be conducted in the future. Specific topics discussed in the 2012 NASA Range Safety Annual Report include a program overview and 2012 highlights; Range Safety Training; Independent Assessments; Support to Program Operations at all ranges conducting NASA launch/flight operations; a continuing overview of emerging range safety-related technologies; and status reports from all of the NASA Centers that have Range Safety responsibilities.

A Recipe for Success OSHA VPP and Wellness

NASA Technical Reports Server (NTRS)

Keprta, Sean

2010-01-01

This slide presentation reviews the Voluntary Protection Program (VPP) which is a program to promote effective worksite-based safety and health. In the VPP, management, labor, and OSHA establish cooperative relationships at workplaces that have implemented a comprehensive safety and health management system. The history of JSC's Total Health program and the movement from the Safety and Total Health program and the efforts to become certified by OSHA is reviewed.

John M. Eisenberg Patient Safety Awards. System innovation: Veterans Health Administration National Center for Patient Safety.

PubMed

Heget, Jeffrey R; Bagian, James P; Lee, Caryl Z; Gosbee, John W

2002-12-01

In 1998 the Veterans Health Administration (VHA) created the National Center for Patient Safety (NCPS) to lead the effort to reduce adverse events and close calls systemwide. NCPS's aim is to foster a culture of safety in the Department of Veterans Affairs (VA) by developing and providing patient safety programs and delivering standardized tools, methods, and initiatives to the 163 VA facilities. To create a system-oriented approach to patient safety, NCPS looked for models in fields such as aviation, nuclear power, human factors, and safety engineering. Core concepts included a non-punitive approach to patient safety activities that emphasizes systems-based learning, the active seeking out of close calls, which are viewed as opportunities for learning and investigation, and the use of interdisciplinary teams to investigate close calls and adverse events through a root cause analysis (RCA) process. Participation by VA facilities and networks was voluntary. NCPS has always aimed to develop a program that would be applicable both within the VA and beyond. NCPS's full patient safety program was tested and implemented throughout the VA system from November 1999 to August 2000. Program components included an RCA system for use by caregivers at the front line, a system for the aggregate review of RCA results, information systems software, alerts and advisories, and cognitive acids. Following program implementation, NCPS saw a 900-fold increase in reporting of close calls of high-priority events, reflecting the level of commitment to the program by VHA leaders and staff.

Development of a robust space power system decision model

NASA Astrophysics Data System (ADS)

Chew, Gilbert; Pelaccio, Dennis G.; Jacobs, Mark; Stancati, Michael; Cataldo, Robert

2001-02-01

NASA continues to evaluate power systems to support human exploration of the Moon and Mars. The system(s) would address all power needs of surface bases and on-board power for space transfer vehicles. Prior studies have examined both solar and nuclear-based alternatives with respect to individual issues such as sizing or cost. What has not been addressed is a comprehensive look at the risks and benefits of the options that could serve as the analytical framework to support a system choice that best serves the needs of the exploration program. This paper describes the SAIC developed Space Power System Decision Model, which uses a formal Two-step Analytical Hierarchy Process (TAHP) methodology that is used in the decision-making process to clearly distinguish candidate power systems in terms of benefits, safety, and risk. TAHP is a decision making process based on the Analytical Hierarchy Process, which employs a hierarchic approach of structuring decision factors by weights, and relatively ranks system design options on a consistent basis. This decision process also includes a level of data gathering and organization that produces a consistent, well-documented assessment, from which the capability of each power system option to meet top-level goals can be prioritized. The model defined on this effort focuses on the comparative assessment candidate power system options for Mars surface application(s). This paper describes the principles of this approach, the assessment criteria and weighting procedures, and the tools to capture and assess the expert knowledge associated with space power system evaluation. .

Analytical methods of the U.S. Geological Survey's New York District Water-Analysis Laboratory

USGS Publications Warehouse

Lawrence, Gregory B.; Lincoln, Tricia A.; Horan-Ross, Debra A.; Olson, Mark L.; Waldron, Laura A.

1995-01-01

The New York District of the U.S. Geological Survey (USGS) in Troy, N.Y., operates a water-analysis laboratory for USGS watershed-research projects in the Northeast that require analyses of precipitation and of dilute surface water and soil water for major ions; it also provides analyses of certain chemical constituents in soils and soil gas samples.This report presents the methods for chemical analyses of water samples, soil-water samples, and soil-gas samples collected in wateshed-research projects. The introduction describes the general materials and technicques for each method and explains the USGS quality-assurance program and data-management procedures; it also explains the use of cross reference to the three most commonly used methods manuals for analysis of dilute waters. The body of the report describes the analytical procedures for (1) solution analysis, (2) soil analysis, and (3) soil-gas analysis. The methods are presented in alphabetical order by constituent. The method for each constituent is preceded by (1) reference codes for pertinent sections of the three manuals mentioned above, (2) a list of the method's applications, and (3) a summary of the procedure. The methods section for each constitutent contains the following categories: instrumentation and equipment, sample preservation and storage, reagents and standards, analytical procedures, quality control, maintenance, interferences, safety considerations, and references. Sufficient information is presented for each method to allow the resulting data to be appropriately used in environmental investigations.

Forensic toxicology.

PubMed

Drummer, Olaf H

2010-01-01

Forensic toxicology has developed as a forensic science in recent years and is now widely used to assist in death investigations, in civil and criminal matters involving drug use, in drugs of abuse testing in correctional settings and custodial medicine, in road and workplace safety, in matters involving environmental pollution, as well as in sports doping. Drugs most commonly targeted include amphetamines, benzodiazepines, cannabis, cocaine and the opiates, but can be any other illicit substance or almost any over-the-counter or prescribed drug, as well as poisons available to the community. The discipline requires high level skills in analytical techniques with a solid knowledge of pharmacology and pharmacokinetics. Modern techniques rely heavily on immunoassay screening analyses and mass spectrometry (MS) for confirmatory analyses using either high-performance liquid chromatography or gas chromatography as the separation technique. Tandem MS has become more and more popular compared to single-stage MS. It is essential that analytical systems are fully validated and fit for the purpose and the assay batches are monitored with quality controls. External proficiency programs monitor both the assay and the personnel performing the work. For a laboratory to perform optimally, it is vital that the circumstances and context of the case are known and the laboratory understands the limitations of the analytical systems used, including drug stability. Drugs and poisons can change concentration postmortem due to poor or unequal quality of blood and other specimens, anaerobic metabolism and redistribution. The latter provides the largest handicap in the interpretation of postmortem results.

76 FR 44081 - Agency Information Collection Activities: Notice of Request for Approval of a New Information...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-22

...: Jeffrey Miller, (202) 366-0744 or [email protected] , Office of Safety Integration, Federal Highway... Friday, except Federal holidays. SUPPLEMENTARY INFORMATION: Title: Strategic Highway Safety Plan (SHSP... Highway Safety Improvement Program (HSIP) as a core Federal program. A Strategic Highway Safety Plan (SHSP...

Systematic Approach to Food Safety Education on the Farm

ERIC Educational Resources Information Center

Shaw, Angela; Strohbehn, Catherine; Naeve, Linda; Domoto, Paul; Wilson, Lester

2015-01-01

Food safety education from farm to end user is essential in the mitigation of food safety concerns associated with fresh produce. Iowa State University developed a multi-disciplinary three-level sequential program ("Know," "Show," "Go") to provide a holistic approach to food safety education. This program provides…

40 CFR 68.48 - Safety information.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 16 2013-07-01 2013-07-01 false Safety information. 68.48 Section 68...) CHEMICAL ACCIDENT PREVENTION PROVISIONS Program 2 Prevention Program § 68.48 Safety information. (a) The owner or operator shall compile and maintain the following up-to-date safety information related to the...

28 CFR 345.83 - Job safety training.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 28 Judicial Administration 2 2013-07-01 2013-07-01 false Job safety training. 345.83 Section 345... INDUSTRIES (FPI) INMATE WORK PROGRAMS FPI Inmate Training and Scholarship Programs § 345.83 Job safety training. FPI provides inmates with regular job safety training which is developed and scheduled in...

28 CFR 345.83 - Job safety training.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 28 Judicial Administration 2 2014-07-01 2014-07-01 false Job safety training. 345.83 Section 345... INDUSTRIES (FPI) INMATE WORK PROGRAMS FPI Inmate Training and Scholarship Programs § 345.83 Job safety training. FPI provides inmates with regular job safety training which is developed and scheduled in...

28 CFR 345.83 - Job safety training.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 28 Judicial Administration 2 2012-07-01 2012-07-01 false Job safety training. 345.83 Section 345... INDUSTRIES (FPI) INMATE WORK PROGRAMS FPI Inmate Training and Scholarship Programs § 345.83 Job safety training. FPI provides inmates with regular job safety training which is developed and scheduled in...

28 CFR 345.83 - Job safety training.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 28 Judicial Administration 2 2011-07-01 2011-07-01 false Job safety training. 345.83 Section 345... INDUSTRIES (FPI) INMATE WORK PROGRAMS FPI Inmate Training and Scholarship Programs § 345.83 Job safety training. FPI provides inmates with regular job safety training which is developed and scheduled in...

10 CFR 851.20 - Management responsibilities and worker rights and responsibilities.

Code of Federal Regulations, 2010 CFR

2010-01-01

... responsibilities. 851.20 Section 851.20 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific...) Management responsibilities. Contractors are responsible for the safety and health of their workforce and... objectives for the worker safety and health program; (2) Use qualified worker safety and health staff (e.g...

29 CFR 1960.19 - Other Federal agency standards affecting occupational safety and health.

Code of Federal Regulations, 2010 CFR

2010-07-01

... safety and health. 1960.19 Section 1960.19 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Standards § 1960.19 Other Federal...

29 CFR 1960.19 - Other Federal agency standards affecting occupational safety and health.

Code of Federal Regulations, 2011 CFR

2011-07-01

... safety and health. 1960.19 Section 1960.19 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Standards § 1960.19 Other Federal...

49 CFR 659.27 - Internal safety and security reviews.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the..., indicating that the rail transit agency is in compliance with its system safety program plan and system... security reviews indicate that the rail transit agency is not in compliance with its system safety program...

28 CFR 345.83 - Job safety training.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Job safety training. 345.83 Section 345... INDUSTRIES (FPI) INMATE WORK PROGRAMS FPI Inmate Training and Scholarship Programs § 345.83 Job safety training. FPI provides inmates with regular job safety training which is developed and scheduled in...