29 CFR 1960.19 - Other Federal agency standards affecting occupational safety and health.

Code of Federal Regulations, 2014 CFR

2014-07-01

... safety and health. 1960.19 Section 1960.19 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Standards § 1960.19 Other Federal agency standards affecting occupational safety and health. (a) Where employees of different agencies...

29 CFR 1960.19 - Other Federal agency standards affecting occupational safety and health.

Code of Federal Regulations, 2013 CFR

2013-07-01

... safety and health. 1960.19 Section 1960.19 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Standards § 1960.19 Other Federal agency standards affecting occupational safety and health. (a) Where employees of different agencies...

29 CFR 1960.19 - Other Federal agency standards affecting occupational safety and health.

Code of Federal Regulations, 2012 CFR

2012-07-01

... safety and health. 1960.19 Section 1960.19 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Standards § 1960.19 Other Federal agency standards affecting occupational safety and health. (a) Where employees of different agencies...

29 CFR 1960.19 - Other Federal agency standards affecting occupational safety and health.

Code of Federal Regulations, 2010 CFR

2010-07-01

... safety and health. 1960.19 Section 1960.19 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Standards § 1960.19 Other Federal...

29 CFR 1960.19 - Other Federal agency standards affecting occupational safety and health.

Code of Federal Regulations, 2011 CFR

2011-07-01

... safety and health. 1960.19 Section 1960.19 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Standards § 1960.19 Other Federal...

Challenges of standardized continuous quality improvement programs in community pharmacies: the case of SafetyNET-Rx.

PubMed

Boyle, Todd A; MacKinnon, Neil J; Mahaffey, Thomas; Duggan, Kellie; Dow, Natalie

2012-01-01

Research on continuous quality improvement (CQI) in community pharmacies lags in comparison to service, manufacturing, and various health care sectors. As a result, very little is known about the challenges community pharmacies face when implementing CQI programs in general, let alone the challenges of implementing a standardized and technologically sophisticated one. This research identifies the initial challenges of implementing a standardized CQI program in community pharmacies and how such challenges were addressed by pharmacy staff. Through qualitative interviews, a multisite study of the SafetyNET-Rx CQI program involving community pharmacies in Nova Scotia, Canada, was performed to identify such challenges. Interviews were conducted with the CQI facilitator (ie, staff pharmacist or technician) in 55 community pharmacies that adopted the SafetyNET-Rx program. Of these 55 pharmacies, 25 were part of large national corporate chains, 22 were part of banner chains, and 8 were independent pharmacies. A total of 10 different corporate chains and banners were represented among the 55 pharmacies. Thematic content analysis using well-established coding procedures was used to explore the interview data and elicit the key challenges faced. Six major challenges were identified, specifically finding time to report, having all pharmacy staff involved in quality-related event (QRE) reporting, reporting apprehensiveness, changing staff relationships, meeting to discuss QREs, and accepting the online technology. Challenges were addressed in a number of ways including developing a manual-online hybrid reporting system, managers paying staff to meet after hours, and pharmacy managers showing visible commitment to QRE reporting and learning. This research identifies key challenges to implementing CQI programs in community pharmacies and also provides a starting point for future research relating to how the challenges of QRE reporting and learning in community pharmacies change

Fusion Safety Program annual report, fiscal year 1994

NASA Astrophysics Data System (ADS)

Longhurst, Glen R.; Cadwallader, Lee C.; Dolan, Thomas J.; Herring, J. Stephen; McCarthy, Kathryn A.; Merrill, Brad J.; Motloch, Chester C.; Petti, David A.

1995-03-01

This report summarizes the major activities of the Fusion Safety Program in fiscal year 1994. The Idaho National Engineering Laboratory (INEL) is the designated lead laboratory and Lockheed Idaho Technologies Company is the prime contractor for this program. The Fusion Safety Program was initiated in 1979. Activities are conducted at the INEL, at other DOE laboratories, and at other institutions, including the University of Wisconsin. The technical areas covered in this report include tritium safety, beryllium safety, chemical reactions and activation product release, safety aspects of fusion magnet systems, plasma disruptions, risk assessment failure rate data base development, and thermalhydraulics code development and their application to fusion safety issues. Much of this work has been done in support of the International Thermonuclear Experimental Reactor (ITER). Also included in the report are summaries of the safety and environmental studies performed by the Fusion Safety Program for the Tokamak Physics Experiment and the Tokamak Fusion Test Reactor and of the technical support for commercial fusion facility conceptual design studies. A major activity this year has been work to develop a DOE Technical Standard for the safety of fusion test facilities.

34 CFR 75.609 - Comply with safety and health standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 1 2010-07-01 2010-07-01 false Comply with safety and health standards. 75.609 Section 75.609 Education Office of the Secretary, Department of Education DIRECT GRANT PROGRAMS What... planning for and designing facilities, a grantee shall observe: (a) The standards under the Occupational...

OSHA Standard Time: Worker Safety Rules for Schools.

ERIC Educational Resources Information Center

Smith, Sharon E.; Roy, Kenneth R.

1994-01-01

Briefly describes six of the Occupational Safety and Health Administration (OSHA) standards applicable to school districts. Provides a suggested approach for compliance and discusses how one district has begun to meet the challenge. The mandated OSHA programs concern the following: (1) hazard communication; (2) chemical hygiene; (3) bloodborne…

Enhancing the NASA Expendable Launch Vehicle Payload Safety Review Process Through Program Activities

NASA Technical Reports Server (NTRS)

Palo, Thomas E.

2007-01-01

The safety review process for NASA spacecraft flown on Expendable Launch Vehicles (ELVs) has been guided by NASA-STD 8719.8, Expendable Launch Vehicle Payload Safety Review Process Standard. The standard focused primarily on the safety approval required to begin pre-launch processing at the launch site. Subsequent changes in the contractual, technical, and operational aspects of payload processing, combined with lessons-learned supported a need for the reassessment of the standard. This has resulted in the formation of a NASA ELV Payload Safety Program. This program has been working to address the programmatic issues that will enhance and supplement the existing process, while continuing to ensure the safety of ELV payload activities.

49 CFR 385.5 - Safety fitness standard.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 5 2010-10-01 2010-10-01 false Safety fitness standard. 385.5 Section 385.5... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS SAFETY FITNESS PROCEDURES General § 385.5 Safety fitness standard. A motor carrier must meet the safety fitness standard set forth...

49 CFR 385.5 - Safety fitness standard.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 5 2011-10-01 2011-10-01 false Safety fitness standard. 385.5 Section 385.5... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS SAFETY FITNESS PROCEDURES General § 385.5 Safety fitness standard. A motor carrier must meet the safety fitness standard set forth...

24 CFR 51.203 - Safety standards.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 1 2011-04-01 2011-04-01 false Safety standards. 51.203 Section 51... Conventional Fuels or Chemicals of an Explosive or Flammable Nature § 51.203 Safety standards. The following... from a hazard: (a) Thermal Radiation Safety Standard. Projects shall be located so that: (1) The...

24 CFR 51.203 - Safety standards.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Safety standards. 51.203 Section 51... Conventional Fuels or Chemicals of an Explosive or Flammable Nature § 51.203 Safety standards. The following... from a hazard: (a) Thermal Radiation Safety Standard. Projects shall be located so that: (1) The...

NASA's Software Safety Standard

NASA Technical Reports Server (NTRS)

Ramsay, Christopher M.

2005-01-01

NASA (National Aeronautics and Space Administration) relies more and more on software to control, monitor, and verify its safety critical systems, facilities and operations. Since the 1960's there has hardly been a spacecraft (manned or unmanned) launched that did not have a computer on board that provided vital command and control services. Despite this growing dependence on software control and monitoring, there has been no consistent application of software safety practices and methodology to NASA's projects with safety critical software. Led by the NASA Headquarters Office of Safety and Mission Assurance, the NASA Software Safety Standard (STD-18l9.13B) has recently undergone a significant update in an attempt to provide that consistency. This paper will discuss the key features of the new NASA Software Safety Standard. It will start with a brief history of the use and development of software in safety critical applications at NASA. It will then give a brief overview of the NASA Software Working Group and the approach it took to revise the software engineering process across the Agency.

A Silent Safety Program

NASA Technical Reports Server (NTRS)

Goodin, James Ronald

2006-01-01

NASA's Columbia Accident Investigation Board (CAIB) referred 8 times to the NASA "Silent Safety Program." This term, "Silent Safety Program" was not an original observation but first appeared in the Rogers Commission's Investigation of the Challenger Mishap. The CAIB on page 183 of its report in the paragraph titled 'Encouraging Minority Opinion,' stated "The Naval Reactor Program encourages minority opinions and "bad news." Leaders continually emphasize that when no minority opinions are present, the responsibility for a thorough and critical examination falls to management. . . Board interviews revealed that it is difficult for minority and dissenting opinions to percolate up through the agency's hierarchy. . ." The first question and perhaps the only question is - what is a silent safety program? Well, a silent safety program may be the same as the dog that didn't bark in Sherlock Holmes' "Adventure of the Silver Blaze" because system safety should behave as a devil's advocate for the program barking on every occasion to insure a critical review inclusion. This paper evaluates the NASA safety program and provides suggestions to prevent the recurrence of the silent safety program alluded to in the Challenger Mishap Investigation. Specifically targeted in the CAM report, "The checks and balances the safety system was meant to provide were not working." A silent system safety program is not unique to NASA but could emerge in any and every organization. Principles developed by Irving Janis in his book, Groupthink, listed criteria used to evaluate an organization's cultural attributes that allows a silent safety program to evolve. If evidence validates Jams's criteria, then Jams's recommendations for preventing groupthink can also be used to improve a critical evaluation and thus prevent the development of a silent safety program.

NASA Technical Standards Program and Implications for Lessons Learned and Technical Standard Integration

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Garcia, Danny; Vaughan, William W.; Parker, Nelson C. (Technical Monitor)

2002-01-01

The National Aeronautics and Space Agency consists of fourteen Facilities throughout the United States. They are organized to support the Agency's principal Enterprises: (1) Space Science, (2) Earth Science, (3) Aerospace Technology, (4) Human Exploration and Development of Space, and (5) Biological and Physical Research. Technical Standards are important to the activities of each Enterprise and have been an integral part in the development and operation of NASA Programs and Projects since the Agency was established in 1959. However, for years each Center was responsible for its own standards development and selection of non-NASA technical standards that met the needs of Programs and Projects for which they were responsible. There were few Agencywide applicable Technical Standards, mainly those in area of safety. Department of Defense Standards and Specifications were the foundation and main source for Technical Standards used by the Agency. This process existed until about 1997 when NASA embarked on a Program to convert NASA's Center-developed Technical Standards into Agencywide endorsed NASA Preferred Technical Standards. In addition, action was taken regarding the formal adoption of non-NASA Technical Standards (DOD, SAE, ASTM, ASME, IEEE, etc.) as NASA Preferred Technical Standards.

THE SCHOOL HEALTH AND SAFETY PROGRAM.

ERIC Educational Resources Information Center

1963

INVOLVING INDIVIDUALS AS WELL AS ORGANIZATIONS, THE PROGRAM AIMED AT THE OPTIMUM HEALTH OF ALL CHILDREN, AND IMPROVEMENT OF HEALTH AND SAFETY STANDARDS WITHIN THE COMMUNITY. EACH OF THE CHILDREN WAS URGED TO HAVE A SUCCESSFUL VACCINATION FOR SMALL POX, THE DPT SERIES AND BOOSTER, THE POLIO SERIES, AND CORRECTIONS OF ALL DENTAL DEFECTS AND…

49 CFR 385.5 - Safety fitness standard.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 5 2012-10-01 2012-10-01 false Safety fitness standard. 385.5 Section 385.5... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS SAFETY FITNESS PROCEDURES General § 385.5 Safety fitness standard. The satisfactory safety rating is based on the degree of...

49 CFR 385.5 - Safety fitness standard.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 5 2013-10-01 2013-10-01 false Safety fitness standard. 385.5 Section 385.5... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS SAFETY FITNESS PROCEDURES General § 385.5 Safety fitness standard. The satisfactory safety rating is based on the degree of...

49 CFR 385.5 - Safety fitness standard.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 5 2014-10-01 2014-10-01 false Safety fitness standard. 385.5 Section 385.5... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS SAFETY FITNESS PROCEDURES General § 385.5 Safety fitness standard. The satisfactory safety rating is based on the degree of...

Highway Safety Program Manual: Volume 14: Pedestrian Safety.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 14 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on pedestrian safety. The purpose and objectives of a pedestrian safety program are outlined. Federal authority in the area of pedestrian safety and policies regarding a safety program…

76 FR 10246 - Updating Fire Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-24

... DEPARTMENT OF VETERANS AFFAIRS 38 CFR Parts 17 and 59 RIN 2900-AN57 Updating Fire Safety Standards... regulations and update the standards for VA approval of such facilities, including standards for fire safety... to ``RIN 2900-AN57--Updating Fire Safety [[Page 10247

Patient safety training in pediatric emergency medicine: a national survey of program directors.

PubMed

Wolff, Margaret; Macias, Charles G; Garcia, Estevan; Stankovic, Curt

2014-07-01

The Accreditation Council for Graduate Medical Education requires training in patient safety and medical errors but does not provide specification for content or methods. Pediatric emergency medicine (EM) fellowship directors were surveyed to characterize current training of pediatric EM fellows in patient safety and to determine the need for additional training. From June 2013 to August 2013, pediatric EM fellowship directors were surveyed via e-mail. Of the 71 eligible survey respondents, 57 (80.3%) completed surveys. A formal curriculum was present in 24.6% of programs, with a median of 6 hours (range = 1 to 18 hours) dedicated to the curriculum. One program evaluated the efficacy of the curriculum. Nearly 91% of respondents without formal programs identified lack of local faculty expertise or interest as the primary barrier to implementing patient safety curricula. Of programs without formal curricula, 93.6% included at least one component of patient safety training in their fellowship programs. The majority of respondents would implement a standardized patient safety curriculum for pediatric EM if one was available. Despite the importance of patient safety training and requirements to train pediatric EM fellows in patient safety and medical errors, there is a lack of formal curriculum and local faculty expertise. The majority of programs have introduced components of patient safety training and desire a standardized curriculum. © 2014 by the Society for Academic Emergency Medicine.

An overview of revised NASA safety standard 1740.14

NASA Technical Reports Server (NTRS)

Reynolds, Robert; Eichler, Peter; Johnson, Nicholas

1997-01-01

Following a broad review of the debris control guidelines outside of NASA and according to additional feedback on the guidelines from within NASA, revisions were made to the NASA safety standard 1740.14. The NASA policy to limit the generation of orbital debris on NASA missions, stated in the NASA management instruction 1700.8 and implemented in the form of the NASA safety standard (NSS) 1740.14 is described together with the revisions implemented. The overall direction of the guidelines is the same, but the details of many of the guidelines were changed, including: changes for tether programs and for the control of operational debris. The NASA will continue to review the guidelines as new measurements and improved models of the environment are obtained.

Safety self-efficacy and safety performance: potential antecedents and the moderation effect of standardization.

PubMed

Katz-Navon, Tal; Naveh, Eitan; Stern, Zvi

2007-01-01

The purpose of this paper is to suggest a new safety self-efficacy construct and to explore its antecedents and interaction with standardization to influence in-patient safety. The paper used a survey of 161 nurses using a self-administered questionnaire over a 14-day period in two large Israeli general hospitals. Nurses answered questions relating to four safety self-efficacy antecedents: enactive mastery experiences; managers as safety role models; verbal persuasion; and safety priority, that relate to the perceived level of standardization and safety self-efficacy. Confirmatory factor analysis was used to assess the scale's construct validity. Regression models were used to test hypotheses regarding the antecedents and influence of safety self-efficacy. Results indicate that: managers as safety role models; distributing safety information; and priority given to safety, contributed to safety self-efficacy. Additionally, standardization moderated the effects of safety self-efficacy and patient safety such that safety self-efficacy was positively associated with patient safety when standardization was low rather than high. Hospital managers should be aware of individual motivations as safety self-efficacy when evaluating the potential influence of standardization on patient safety. Theoretically, the study introduces a new safety self-efficacy concept, and captures its antecedents and influence on safety performance. Also, the study suggests safety self-efficacy as a boundary condition for the influence of standardization on safety performance. Implementing standardization in healthcare is problematic because not all processes can be standardized. In this case, self-efficacy plays an important role in securing patient safety. Hence, safety self-efficacy may serve as a "substitute-for-standardization," by promoting staff behaviors that affect patient safety.

76 FR 8699 - Locomotive Safety Standards; Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-15

.... FRA-2009-0094 and FRA-2009-0095, Notice No. 2] RIN 2130-AC16 Locomotive Safety Standards; Correction... notifying the public that the correct docket number for the Locomotive Safety Standards notice of proposed... locomotive safety standards. See 76 FR 2200. The NPRM established a public docket to receive comments in...

77 FR 23159 - Locomotive Safety Standards; Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-18

.... FRA-2009-0094 and FR-2009-0095, Notice No. 4] RIN 2130-AC16 Locomotive Safety Standards; Correction... notifying the public that the correct docket number for the Locomotive Safety Standards final rule is FRA... rule related to locomotive safety standards. See 77 FR 21312. The final rule established a public...

75 FR 17641 - Updating Fire Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-07

... DEPARTMENT OF VETERANS AFFAIRS 38 CFR Parts 17 and 59 RIN 2900-AN57 Updating Fire Safety Standards... for VA approval of such facilities, including standards for fire safety and heating and cooling... submitted in response to ``RIN 2900-AN57--Updating Fire Safety Standards.'' Copies of comments received will...

Highway Safety Program Manual: Volume 3: Motorcycle Safety.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 3 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on aspects of motorcycle safety. The purpose and specific objectives of a State motorcycle safety program are outlined. Federal authority in the highway safety area and general policies…

29 CFR 1925.2 - Safety and health standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 7 2014-07-01 2014-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH STANDARDS FOR FEDERAL SERVICE CONTRACTS § 1925.2 Safety and health standards...

29 CFR 1925.2 - Safety and health standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 7 2010-07-01 2010-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH STANDARDS FOR FEDERAL SERVICE CONTRACTS § 1925.2 Safety and health standards...

29 CFR 1925.2 - Safety and health standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 7 2012-07-01 2012-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH STANDARDS FOR FEDERAL SERVICE CONTRACTS § 1925.2 Safety and health standards...

29 CFR 1925.2 - Safety and health standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 7 2011-07-01 2011-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH STANDARDS FOR FEDERAL SERVICE CONTRACTS § 1925.2 Safety and health standards...

29 CFR 1925.2 - Safety and health standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 7 2013-07-01 2013-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH STANDARDS FOR FEDERAL SERVICE CONTRACTS § 1925.2 Safety and health standards...

46 CFR 80.25 - Notification of safety standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... standards, except the 1966 fire safety standards. (ii) This vessel complies with international safety standards developed prior to 1960. There is (or, is not) an automatic sprinkler system fitted in the... international safety standard. There is (or, is not) an automatic sprinkler system fitted in the passenger...

46 CFR 80.25 - Notification of safety standards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... standards, except the 1966 fire safety standards. (ii) This vessel complies with international safety standards developed prior to 1960. There is (or, is not) an automatic sprinkler system fitted in the... international safety standard. There is (or, is not) an automatic sprinkler system fitted in the passenger...

46 CFR 80.25 - Notification of safety standards.

Code of Federal Regulations, 2013 CFR

2013-10-01

... standards, except the 1966 fire safety standards. (ii) This vessel complies with international safety standards developed prior to 1960. There is (or, is not) an automatic sprinkler system fitted in the... international safety standard. There is (or, is not) an automatic sprinkler system fitted in the passenger...

46 CFR 80.25 - Notification of safety standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... standards, except the 1966 fire safety standards. (ii) This vessel complies with international safety standards developed prior to 1960. There is (or, is not) an automatic sprinkler system fitted in the... international safety standard. There is (or, is not) an automatic sprinkler system fitted in the passenger...

1996 DOE technical standards program workshop: Proceedings

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-07-01

The workshop theme is `The Strategic Standardization Initiative - A Technology Exchange and Global Competitiveness Challenge for DOE.` The workshop goal is to inform the DOE technical standards community of strategic standardization activities taking place in the Department, other Government agencies, standards developing organizations, and industry. Individuals working on technical standards will be challenged to improve cooperation and communications with the involved organizations in response to the initiative. Workshop sessions include presentations by representatives from various Government agencies that focus on coordination among and participation of Government personnel in the voluntary standards process; reports by standards organizations, industry, and DOEmore » representatives on current technology exchange programs; and how the road ahead appears for `information superhighway` standardization. Another session highlights successful standardization case studies selected from several sites across the DOE complex. The workshop concludes with a panel discussion on the goals and objectives of the DOE Technical Standards Program as envisioned by senior DOE management. The annual workshop on technical standards has proven to be an effective medium for communicating information related to standards throughout the DOE community. Technical standards are used to transfer technology and standardize work processes to produce consistent, acceptable results. They provide a practical solution to the Department`s challenge to protect the environment and the health and safety of the public and workers during all facility operations. Through standards, the technologies of industries and governments worldwide are available to DOE. The DOE Technical Standards Program, a Department-wide effort that crosscuts all organizations and disciplines, links the Department to those technologies.« less

30 CFR 77.1708 - Safety program; instruction of persons employed at the mine.

Code of Federal Regulations, 2010 CFR

2010-07-01

... at the mine. 77.1708 Section 77.1708 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND COAL MINES Miscellaneous § 77.1708 Safety program; instruction of persons...

29 CFR 1924.1 - Applicable safety standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 7 2011-07-01 2011-07-01 false Applicable safety standards. 1924.1 Section 1924.1 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY STANDARDS APPLICABLE TO WORKSHOPS AND REHABILITATION FACILITIES ASSISTED BY GRANTS § 1924...

46 CFR 80.25 - Notification of safety standards.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Notification of safety standards. 80.25 Section 80.25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS DISCLOSURE OF SAFETY STANDARDS AND COUNTRY OF REGISTRY § 80.25 Notification of safety standards. (a) Each owner, operator, agent...

76 FR 70885 - Updating Fire Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-16

... DEPARTMENT OF VETERANS AFFAIRS 38 CFR Part 59 RIN 2900-AN57 Updating Fire Safety Standards AGENCY... Fire Protection Association (NFPA) 101. This rule helps ensure the safety of veterans in the affected... publications are: NFPA 10, Standard for Portable Fire Extinguishers; NFPA 99, Standard for Health Care...

Findings From the National Machine Guarding Program-A Small Business Intervention: Machine Safety.

PubMed

Parker, David L; Yamin, Samuel C; Xi, Min; Brosseau, Lisa M; Gordon, Robert; Most, Ivan G; Stanley, Rodney

2016-09-01

The purpose of this nationwide intervention was to improve machine safety in small metal fabrication businesses (3 to 150 employees). The failure to implement machine safety programs related to guarding and lockout/tagout (LOTO) are frequent causes of Occupational Safety and Health Administration (OSHA) citations and may result in serious traumatic injury. Insurance safety consultants conducted a standardized evaluation of machine guarding, safety programs, and LOTO. Businesses received a baseline evaluation, two intervention visits, and a 12-month follow-up evaluation. The intervention was completed by 160 businesses. Adding a safety committee was associated with a 10% point increase in business-level machine scores (P < 0.0001) and a 33% point increase in LOTO program scores (P < 0.0001). Insurance safety consultants proved effective at disseminating a machine safety and LOTO intervention via management-employee safety committees.

29 CFR 505.6 - Safety and health standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Safety and health standards. 505.6 Section 505.6 Labor... HUMANITIES § 505.6 Safety and health standards. (a) Standards. Section 5(i)(2) and section 7(g)(2) of the Act... dangerous to the health and safety of the employees engaged in such project or production. Compliance with...

29 CFR 505.6 - Safety and health standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 3 2014-07-01 2014-07-01 false Safety and health standards. 505.6 Section 505.6 Labor... HUMANITIES § 505.6 Safety and health standards. (a) Standards. Section 5(i)(2) and section 7(g)(2) of the Act... dangerous to the health and safety of the employees engaged in such project or production. Compliance with...

29 CFR 505.6 - Safety and health standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 3 2011-07-01 2011-07-01 false Safety and health standards. 505.6 Section 505.6 Labor... HUMANITIES § 505.6 Safety and health standards. (a) Standards. Section 5(i)(2) and section 7(g)(2) of the Act... dangerous to the health and safety of the employees engaged in such project or production. Compliance with...

29 CFR 505.6 - Safety and health standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 3 2012-07-01 2012-07-01 false Safety and health standards. 505.6 Section 505.6 Labor... HUMANITIES § 505.6 Safety and health standards. (a) Standards. Section 5(i)(2) and section 7(g)(2) of the Act... dangerous to the health and safety of the employees engaged in such project or production. Compliance with...

29 CFR 505.6 - Safety and health standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 3 2013-07-01 2013-07-01 false Safety and health standards. 505.6 Section 505.6 Labor... HUMANITIES § 505.6 Safety and health standards. (a) Standards. Section 5(i)(2) and section 7(g)(2) of the Act... dangerous to the health and safety of the employees engaged in such project or production. Compliance with...

Food Safety Program in Asian Countries.

PubMed

Yamaguchi, Ryuji; Hwang, Lucy Sun

2015-01-01

By using the ILSI network in Asia, we are holding a session focused on food safety programs in several Asian areas. In view of the external environment, it is expected to impact the global food system in the near future, including the rapid increase in food demand and in public health services due to population growth, as well as the threats to biosecurity and food safety due to the rapid globalization of the food trade. Facilitating effective information sharing holds promise for the activation of the food industry. At this session, Prof. Hwang shares the current situation of Food Safety and Sanitation Regulations in Taiwan. Dr. Liu provides a talk on the role of risk assessment in food regulatory control focused on aluminum-containing food additives in China. After the JECFA evaluation of aluminum-containing food additives in 2011, each country has carried out risk assessment based on dietary intake surveys. Ms. Chan reports on the activities of a working group on Food Standards Harmonization in ASEAN. She also explains that the ILSI Southeast Asia Region has actively supported the various ASEAN Working Groups in utilizing science to harmonize food standards. Prof. Park provides current research activities in Korea focused on the effect of climate change on food safety. Climate change is generally seen as having a negative impact on food security, particularly in developing countries. We use these four presentations as a springboard to vigorous discussion on issues related to Food Safety in Asia.

Food safety regulations in Australia and New Zealand Food Standards.

PubMed

Ghosh, Dilip

2014-08-01

Citizens of Australia and New Zealand recognise that food security is a major global issue. Food security also affects Australia and New Zealand's status as premier food exporting nations and the health and wellbeing of the Australasian population. Australia is uniquely positioned to help build a resilient food value chain and support programs aimed at addressing existing and emerging food security challenges. The Australian food governance system is fragmented and less transparent, being largely in the hands of government and semi-governmental regulatory authorities. The high level of consumer trust in Australian food governance suggests that this may be habitual and taken for granted, arising from a lack of negative experiences of food safety. In New Zealand the Ministry of Primary Industries regulates food safety issues. To improve trade and food safety, New Zealand and Australia work together through Food Standards Australia New Zealand (FSANZ) and other co-operative agreements. Although the potential risks to the food supply are dynamic and constantly changing, the demand, requirement and supply for providing safe food remains firm. The Australasian food industry will need to continually develop its system that supports the food safety program with the help of scientific investigations that underpin the assurance of what is and is not safe. The incorporation of a comprehensive and validated food safety program is one of the total quality management systems that will ensure that all areas of potential problems are being addressed by industry. © 2014 Society of Chemical Industry.

Alternative Fuels Data Center: Biodiesel Codes, Standards, and Safety

Science.gov Websites

Codes, Standards, and Safety to someone by E-mail Share Alternative Fuels Data Center: Biodiesel Codes, Standards, and Safety on Facebook Tweet about Alternative Fuels Data Center: Biodiesel Codes , Standards, and Safety on Twitter Bookmark Alternative Fuels Data Center: Biodiesel Codes, Standards, and

Radiation safety standards and their application: international policies and current issues.

PubMed

González, Abel J

2004-09-01

This paper briefly describes the current policies of the United Nations Scientific Committee on the Effects of Atomic Radiation and the International Commission on Radiological Protection and how these policies are converted into international radiation safety standards by the International Atomic Energy Agency, which is the only global organization-within the United Nations family of international agencies-with a statutory mandate not only to establish such standards but also to provide for their application. It also summarizes the current status of the established corpus of such international standards, and of it foreseeable evolution, as well as of legally binding undertakings by countries around the world that are linked to these standards. Moreover, this paper also reviews some major current global issues related to the application of international standards, including the following: strengthening of national infrastructures for radiation safety, including technical cooperation programs for assisting developing countries; occupational radiation safety challenges, including the protection of pregnant workers and their unborn children, dealing with working environments with high natural radiation levels, and occupational attributability of health effects (probability of occupational causation); restricting discharges of radioactive substances into the environment: reviewing current international policies vis-a-vis the growing concern on the radiation protection of the "environment;" radiological protection of patients undergoing radiodiagnostic and radiotherapeutic procedures: the current International Action Plan; safety and security of radiation sources: post-11 September developments; preparedness and response to radiation emergencies: enhancing the international network; safe transport of radioactive materials: new apprehensions; safety of radioactive waste management: concerns and connections with radiation protection; and radioactive residues remaining

Masonry Program Standards.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This publication contains statewide standards for the masonry program in Georgia. The standards are divided into 12 categories: foundations (philosophy, purpose, goals, program objectives, availability, evaluation); admissions (admission requirements, provisional admission requirements, recruitment, evaluation and planning); program structure…

[Expert investigation on food safety standard system framework construction in China].

PubMed

He, Xiang; Yan, Weixing; Fan, Yongxiang; Zeng, Biao; Peng, Zhen; Sun, Zhenqiu

2013-09-01

Through investigating food safety standard framework among food safety experts, to summarize the basic elements and principles of food safety standard system, and provide policy advices for food safety standards framework. A survey was carried out among 415 experts from government, professional institutions and the food industry/enterprises using the National Food Safety Standard System Construction Consultation Questionnaire designed in the name of the Secretariat of National Food Safety Standard Committee. Experts have different advices in each group about the principles of food product standards, food additive product standards, food related product standards, hygienic practice, test methods. According to the results, the best solution not only may reflect experts awareness of the work of food safety standards situation, but also provide advices for setting and revision of food safety standards for the next. Through experts investigation, the framework and guiding principles of food safety standard had been built.

12 CFR Appendix C to Part 1720 - Policy Guidance; Safety and Soundness Standards for Information

Code of Federal Regulations, 2014 CFR

2014-01-01

... Standards for Information C Appendix C to Part 1720 Banks and Banking OFFICE OF FEDERAL HOUSING ENTERPRISE..., App. C Appendix C to Part 1720—Policy Guidance; Safety and Soundness Standards for Information A... for Information 1. Information Security Program. 2. Objectives. C—Development and Implementation of...

NASA Technical Standards Program

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Vaughan, William W.; Parker, Nelson C. (Technical Monitor)

2002-01-01

The NASA Technical Standards Program was officially established in 1997 as result of a directive issued by the Administrator. It is responsible for Agency wide technical standards development, adoption (endorsement), and conversion of Center-unique standards for Agency wide use. One major element of the Program is the review of NSA technical standards products and replacement with non-Government Voluntary Consensus Standards in accordance with directions issued by the Office of Management and Budget. As part of the Program's function, it developed a NASA Integrated Technical Standards Initiative that consists of and Agency wide full-text system, standards update notification system, and lessons learned-standards integration system. The Program maintains a 'one stop-shop' Website for technical standards ad related information on aerospace materials, etc. This paper provides information on the development, current status, and plans for the NAS Technical Standards Program along with metrics on the utility of the products provided to both users within the nasa.gov Domain and the Public Domain.

NASA Technical Standards Program

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Vaughan, WIlliam W.

2003-01-01

The NASA Technical Standards Program was officially established in 1997 as result of a directive issued by the Administrator. It is responsible for Agency wide technical standards development, adoption (endorsement), and conversion of Center-unique standards for Agency wide use. One major element of the Program is the review of NSA technical standards products and replacement with non-Government Voluntary Consensus Standards in accordance with directions issued by the Office of Management and Budget. As part of the Program s function, it developed a NASA Integrated Technical Standards Initiative that consists of and Agency wide full-text system, standards update notification system, and lessons learned - standards integration system. The Program maintains a "one stop-shop" Website for technical standards ad related information on aerospace materials, etc. This paper provides information on the development, current status, and plans for the NAS Technical Standards Program along with metrics on the utility of the products provided to both users within the nasa.gov Domain and the Public Domain.

Overview of Energy Systems` safety analysis report programs. Safety Analysis Report Update Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-03-01

The primary purpose of an Safety Analysis Report (SAR) is to provide a basis for judging the adequacy of a facility`s safety. The SAR documents the safety analyses that systematically identify the hazards posed by the facility, analyze the consequences and risk of potential accidents, and describe hazard control measures that protect the health and safety of the public and employees. In addition, some SARs document, as Technical Safety Requirements (TSRs, which include Technical Specifications and Operational Safety Requirements), technical and administrative requirements that ensure the facility is operated within prescribed safety limits. SARs also provide conveniently summarized information thatmore » may be used to support procedure development, training, inspections, and other activities necessary to facility operation. This ``Overview of Energy Systems Safety Analysis Report Programs`` Provides an introduction to the programs and processes used in the development and maintenance of the SARs. It also summarizes some of the uses of the SARs within Energy Systems and DOE.« less

77 FR 70409 - System Safety Program

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-26

...-0060, Notice No. 2] 2130-AC31 System Safety Program AGENCY: Federal Railroad Administration (FRA... passenger railroads to develop and implement a system safety program (SSP) to improve the safety of their... Division, U.S. Department of Transportation, Federal Railroad Administration, Office of Railroad Safety...

41 CFR 50-204.2 - General safety and health standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 1 2010-07-01 2010-07-01 true General safety and health... Public Contracts PUBLIC CONTRACTS, DEPARTMENT OF LABOR 204-SAFETY AND HEALTH STANDARDS FOR FEDERAL SUPPLY CONTRACTS General Safety and Health Standards § 50-204.2 General safety and health standards. (a) Every...

Standards 101; the ASA standards program

NASA Astrophysics Data System (ADS)

Schomer, Paul D.

2002-11-01

ASA supports the development of standards by serving as the secretariat for standards committees of the American National Standards Institute (ANSI). The program is organized through four ANSI technical committees (S1, S2, S3, and S12) and one administrative committee (ASACOS). S1 deals with physical acoustics, S2 deals with shock and vibration, S3 deals with physiological and psychological acoustics, and S12 deals with noise. ASACOS is the ASA Committee on Standards. The program has three primary tasks: (1) the development of National Standards (ANSI Standards), (2) the national adoption of an international standard (ANSI NAIS Standards), (3) providing the USA input to the development of International Standards (ISO and IEC Standards). At every level the main work is accomplished in Working Groups (WG) that are ''staffed'' by hundreds of volunteers--mainly ASA members from its various technical committees such as Noise, Physical Acoustics, Architectural Acoustics, Psychological and Physiological Acoustics, etc. Overall, the Standards Program involves more ASA members than does any other single function of the Society except meetings and it is the biggest outreach function of ASA affecting the health, welfare, and economic well-being of large segments of the population, the business and industrial community, and government at all levels.

Standards 101: The ASA Standards program

NASA Astrophysics Data System (ADS)

Schomer, Paul

2004-05-01

ASA serves as a standards developer under the auspices of the American National Standards Institute (ANSI). The Standards Program is organized through four technical committees (S1, S2, S3, and S12) and one administrative committee (ASACOS). S1 deals with physical acoustics, S2 deals with shock and vibration, S3 deals with physiological and psychological acoustics and S12 deals with noise. ASACOS is the ASA Committee on Standards. The program has three primary tasks: (1) development of national standards (ANSI Standards), (2) national adoption of international standards (ANSI NAIS Standards), (3) providing the USA input to the development of international standards (ISO and IEC Standards). At every level the main work is accomplished in Working Groups (WG) that are staffed by hundreds of volunteers, mainly ASA members from its various technical committees such as Noise, Physical Acoustics, Architectural Acoustics, Physiological and Psychological Acoustics, etc. Overall, the Standards Program involves more ASA members than does any other single function of the society except meetings. It is the biggest outreach function of ASA affecting the health, welfare, and economic well-being of large sectors of society. It is a main way the ASA diffuses the knowledge of acoustics and its practical application, perhaps the main way.

Patient safety principles in family medicine residency accreditation standards and curriculum objectives

PubMed Central

Kassam, Aliya; Sharma, Nishan; Harvie, Margot; O’Beirne, Maeve; Topps, Maureen

2016-01-01

Abstract Objective To conduct a thematic analysis of the College of Family Physicians of Canada’s (CFPC’s) Red Book accreditation standards and the Triple C Competency-based Curriculum objectives with respect to patient safety principles. Design Thematic content analysis of the CFPC’s Red Book accreditation standards and the Triple C curriculum. Setting Canada. Main outcome measures Coding frequency of the patient safety principles (ie, patient engagement; respectful, transparent relationships; complex systems; a just and trusting culture; responsibility and accountability for actions; and continuous learning and improvement) found in the analyzed CFPC documents. Results Within the analyzed CFPC documents, the most commonly found patient safety principle was patient engagement (n = 51 coding references); the least commonly found patient safety principles were a just and trusting culture (n = 5 coding references) and complex systems (n = 5 coding references). Other patient safety principles that were uncommon included responsibility and accountability for actions (n = 7 coding references) and continuous learning and improvement (n = 12 coding references). Conclusion Explicit inclusion of patient safety content such as the use of patient safety principles is needed for residency training programs across Canada to ensure the full spectrum of care is addressed, from community-based care to acute hospital-based care. This will ensure a patient safety culture can be cultivated from residency and sustained into primary care practice. PMID:27965349

A qualitative evaluation of fire safety education programs for older adults.

PubMed

Diekman, Shane T; Stewart, Tamara A; Teh, S Leesia; Ballesteros, Michael F

2010-03-01

This article presents a qualitative evaluation of six fire safety education programs for older adults delivered by public fire educators. Our main aims were to explore how these programs are implemented and to determine important factors that may lead to program success, from the perspectives of the public fire educators and the older adults. For each program, we interviewed the public fire educator(s), observed the program in action, and conducted focus groups with older adults attending the program. Analysis revealed three factors that were believed to facilitate program success (established relationships with the older adult community, rapport with older adult audiences, and presentation relevance) as well as three challenges (lack of a standardized curriculum and program implementation strategies, attendance difficulties, and physical limitations due to age). More fire safety education should be developed for older adult populations. For successful programs, public fire educators should address the specific needs of their local older adult community.

Safety and economic impacts of photo radar program.

PubMed

Chen, Greg

2005-12-01

Unsafe speed is one of the major traffic safety challenges facing motorized nations. In 2003, unsafe speed contributed to 31 percent of all fatal collisions, causing a loss of 13,380 lives in the United States alone. The economic impact of speeding is tremendous. According to NHTSA, the cost of unsafe speed related collisions to the American society exceeds 40 billion US dollars per year. In response, automated photo radar speed enforcement programs have been implemented in many countries. This study assesses the economic impacts of a large-scale photo radar program in British Columbia. The knowledge generated from this study could inform policy makers and project managers in making informed decisions with regard to this highly effective and efficient, yet very controversial program. This study establishes speed and safety effects of photo radar programs by summarizing two physical impact investigations in British Columbia. It then conducts a cost-benefit analysis to assess the program's economic impacts. The cost-benefit analysis takes into account both societal and funding agency's perspectives. It includes a comprehensive account of major impacts. It uses willingness to pay principle to value human lives saved and injuries avoided. It incorporates an extended sensitivity analysis to quantify the robustness of base case conclusions. The study reveals an annual net benefit of approximately 114 million in year 2001 Canadian dollars to British Columbians. The study also finds a net annual saving of over 38 million Canadian dollars for the Insurance Corporation of British Columbia (ICBC) that funded the program. These results are robust under almost all alternative scenarios tested. The only circumstance under which the net benefit of the program turns negative is when the real safety effects were one standard deviation below the estimated values, which is possible but highly unlikely. Automated photo radar traffic safety enforcement can be an effective and efficient

76 FR 57897 - Energy Conservation Program: Energy Conservation Standards for Certain External Power Supplies

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-19

... Energy Conservation Program: Energy Conservation Standards for Certain External Power Supplies AGENCY... external power supplies used in specific applications from certain energy conservation standards prescribed... external power supplies used either in security or life safety alarms or surveillance system components...

An Operational Safety and Health Program.

ERIC Educational Resources Information Center

Uhorchak, Robert E.

1983-01-01

Describes safety/health program activities at Research Triangle Institute (North Carolina). These include: radioisotope/radiation and hazardous chemical/carcinogen use, training, monitoring, disposal; chemical waste management; air monitoring and analysis; medical program; fire safety/training, including emergency planning; Occupational Safety and…

Informing a pedestrian safety improvement program.

DOT National Transportation Integrated Search

2009-01-01

Caltrans is scoping the development of a Pedestrian Safety Improvement Program (PSIP). In its mission, organization or implementation, such a program might be analogous to the agencys existing Highway Safety Improvement Program (HSIP). The HSIP (s...

76 FR 43743 - Pipeline Safety: Meetings of the Technical Pipeline Safety Standards Committee and the Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-21

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2011-0127] Pipeline Safety: Meetings of the Technical Pipeline Safety Standards Committee and the Technical Hazardous Liquid Pipeline Safety Standards Committee AGENCY: Pipeline and Hazardous Materials...

76 FR 34890 - Track Safety Standards; Concrete Crossties

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-15

...-0007, Notice No. 3] RIN 2130-AC01 Track Safety Standards; Concrete Crossties AGENCY: Federal Railroad... effective concrete crossties, for rail fastening systems connected to concrete crossties, and for automated inspections of track constructed with concrete crossties. The Track Safety Standards were amended via final...

77 FR 52272 - Safety Standard for Play Yards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-29

... Standard for Play Yards AGENCY: Consumer Product Safety Commission. ACTION: Notice of proposed rulemaking... to amend the play yard mandatory standard. This proposed rule would address the hazards associated... Improvement Act of 2008 (CPSIA), also known as the ``Danny Keysar Child Product Safety Notification Act...

Why system safety programs can fail

NASA Technical Reports Server (NTRS)

Hammer, W.

1971-01-01

Factors that cause system safety programs to fail are discussed from the viewpoint that in general these programs have not achieved their intended aims. The one item which is considered to contribute most to failure of a system safety program is a poor statement of work which consists of ambiguity, lack of clear definition, use of obsolete requirements, and pure typographical errors. It is pointed out that unless safety requirements are stated clearly, and where they are readily apparent as firm requirements, some of them will be overlooked by designers and contractors. The lack of clarity is stated as being a major contributing factor in system safety program failure and usually evidenced in: (1) lack of clear requirements by the procuring activity, (2) lack of clear understanding of system safety by other managers, and (3) lack of clear methodology to be employed by system safety engineers.

41 CFR 50-204.2 - General safety and health standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... health standards. 50-204.2 Section 50-204.2 Public Contracts and Property Management Other Provisions Relating to Public Contracts PUBLIC CONTRACTS, DEPARTMENT OF LABOR 204-SAFETY AND HEALTH STANDARDS FOR FEDERAL SUPPLY CONTRACTS General Safety and Health Standards § 50-204.2 General safety and health...

77 FR 54836 - Federal Motor Vehicle Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-06

... DEPARTMENT OF TRANSPORTATION National Highway Traffic Safety Administration 49 CFR Part 571 Federal Motor Vehicle Safety Standards CFR Correction 0 In Title 49 of the Code of Federal Regulations... read as follows: Sec. 571.119 Standard No. 119; New pneumatic tires for motor vehicles with a GVWR of...

76 FR 22019 - Safety Standard for Toddler Beds

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-20

... warnings should increase consumers' understanding of the connection between the relevant behaviors and... CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Part 1217 RIN 3041-AC79 Safety Standard for Toddler Beds AGENCY: Consumer Product Safety Commission. ACTION: Final rule. SUMMARY: The Consumer Product Safety...

78 FR 43091 - Technical Operations Safety Action Program (T-SAP) and Air Traffic Safety Action Program (ATSAP)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-19

... Administration 14 CFR Part 193 [Docket No.: FAA-2013-0375] Technical Operations Safety Action Program (T-SAP) and Air Traffic Safety Action Program (ATSAP) AGENCY: Federal Aviation Administration (FAA), Department of Transportation (DOT). ACTION: Notice of Proposed Order Designating Safety Information as Protected from...

Workplace safety and health programs, practices, and conditions in auto collision repair businesses.

PubMed

Brosseau, L M; Bejan, A; Parker, D L; Skan, M; Xi, M

2014-01-01

This article describes the results of a pre-intervention safety assessment conducted in 49 auto collision repair businesses and owners' commitments to specific improvements. A 92-item standardized audit tool employed interviews, record reviews, and observations to assess safety and health programs, training, and workplace conditions. Owners were asked to improve at least one-third of incorrect, deficient, or missing (not in compliance with regulations or not meeting best practice) items, of which a majority were critical or highly important for ensuring workplace safety. Two-thirds of all items were present, with the highest fraction related to electrical safety, machine safety, and lockout/tagout. One-half of shops did not have written safety programs and had not conducted recent training. Many had deficiencies in respiratory protection programs and practices. Thirteen businesses with a current or past relationship with a safety consultant had a significantly higher fraction of correct items, in particular related to safety programs, up-to-date training, paint booth and mixing room conditions, electrical safety, and respiratory protection. Owners selected an average of 58% of recommended improvements; they were most likely to select items related to employee Right-to-Know training, emergency exits, fire extinguishers, and respiratory protection. They were least likely to say they would improve written safety programs, stop routine spraying outside the booth, or provide adequate fire protection for spray areas outside the booth. These baseline results suggest that it may be possible to bring about workplace improvements using targeted assistance from occupational health and safety professionals.

Aviation Safety/Automation Program Conference

NASA Technical Reports Server (NTRS)

Morello, Samuel A. (Compiler)

1990-01-01

The Aviation Safety/Automation Program Conference - 1989 was sponsored by the NASA Langley Research Center on 11 to 12 October 1989. The conference, held at the Sheraton Beach Inn and Conference Center, Virginia Beach, Virginia, was chaired by Samuel A. Morello. The primary objective of the conference was to ensure effective communication and technology transfer by providing a forum for technical interchange of current operational problems and program results to date. The Aviation Safety/Automation Program has as its primary goal to improve the safety of the national airspace system through the development and integration of human-centered automation technologies for aircraft crews and air traffic controllers.

International Safety Regulation and Standards for Space Travel and Commerce

NASA Astrophysics Data System (ADS)

Pelton, J. N.; Jakhu, R.

The evolution of air travel has led to the adoption of the 1944 Chicago Convention that created the International Civil Aviation Organization (ICAO), headquartered in Montreal, Canada, and the propagation of aviation safety standards. Today, ICAO standardizes and harmonizes commercial air safety worldwide. Space travel and space safety are still at an early stage of development, and the adoption of international space safety standards and regulation still remains largely at the national level. This paper explores the international treaties and conventions that govern space travel, applications and exploration today and analyzes current efforts to create space safety standards and regulations at the national, regional and global level. Recent efforts to create a commercial space travel industry and to license commercial space ports are foreseen as means to hasten a space safety regulatory process.

Suborbital Safety Technical Committee- Summary of Proposed Standards & Guidelines

NASA Astrophysics Data System (ADS)

Quinn, Andy; Atencia Yepez, Amaya; Klicker, Michael; Howard, Diane; Verstraeten, Joram; Other Suborbital Safety TC Members

2013-09-01

There are currently no international safety standards and guidelines to assist designers, operators and authorities in the suborbital domain. There is a launch licensing regime in the United States (US) to assist the forerunners of the suborbital domain however this does not provide a safety approval for the vehicle against set standards or does not have an acceptable level of safety to achieve in terms of design or operation. In Europe a certification framework may be implemented however this (or any regulatory framework) is not in place as yet. This paper summarises the 5 tasks thus far completed by the International Association for the Advancement of Space Safety (IAASS) Suborbital Safety Technical Committee (SS TC) in terms of deriving standards and guidelines for the suborbital domain. The SS TC comprises members from the suborbital industry (US and European vehicle designers), safety experts, legal experts, medical/training experts, prospective spaceport operators and members from the US and European authorities (though these members cannot directly steer the standards and guidelines - they can merely review them for interest and comment on non-policy aspects). The SS TC has been divided into three working groups (WG): Regulatory WG, Technical WG and Operations WG. The 5 tasks that are summarised in this paper include: Regulatory WG - (Task 1) Clarify and promote regulatory framework for suborbital flights (including discussions on Space Law 'v' Air Law for suborbital domain); Technical WG - (Task 1) Defining & Alignment (globally) of Safety Criteria for Suborbital domain using industry best practices, (Task 2) Software/complex hardware certification for suborbital flights; Operations WG - (Task 1) Flight Crew and Spaceflight Participant Medical and Training Standards & Guidelines for suborbital flight, (Task 2) Spaceport Safety Management System. This paper also details the next set of standards and guidelines that will be derived by the SS TC. The paper

77 FR 35747 - Highway Safety Programs; Conforming Products List of Evidential Breath Alcohol Measurement Devices

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-14

...-0061] Highway Safety Programs; Conforming Products List of Evidential Breath Alcohol Measurement... Evidential Breath Alcohol Measurement Devices dated, September 17, 1993 (58 FR 48705). DATES: Effective Date... Safety Administration (NHTSA) published the Standards for Devices to Measure Breath Alcohol (38 FR 30459...

Assessment of Safety Standards for Automotive Electronic Control Systems

DOT National Transportation Integrated Search

2016-06-01

This report summarizes the results of a study that assessed and compared six industry and government safety standards relevant to the safety and reliability of automotive electronic control systems. These standards include ISO 26262 (Road Vehicles - ...

Implementing a patient safety and quality program across two merged pediatric institutions.

PubMed

Abramson, Erika; Hyman, Daniel; Osorio, S Nena; Kaushal, Rainu

2009-01-01

Academic centers are among the health care organizations that have used consolidation as a strategy to improve efficiency and reduce costs. In 1997, the New York Hospital and The Presbyterian Hospital underwent a full-asset merger to become New York City's largest medical center, known as the New York-Presbyterian Hospital (NYPH). In 2006, recognition of the challenges of the Children's Service Line at NYPH led to the formation of a Patient Safety and Quality Program to deliver consistently safe and effective health care. Each campus has a children's quality council, an interdisciplinary group that discusses and prioritizes safety and quality issues. The quality councils from each campus report directly to a bicampus children's quality steering committee formed to ensure that similar safety practices and standards are implemented across both children's hospitals. A safety subcommittee, which primarily coordinates and follows up on leadership safety walk rounds, and a significant-events subcommittee, which reviews morbidities and mortalities, report to each hospital's quality council. The bicampus pediatric quality and safety program is organized around five broad themes: improving the culture of safety, reducing the frequency of health care-acquired infections, reducing harm in the health care setting, using information technology to improve the quality and safety of care provided to patients and families, and measuring the effectiveness of care in key areas. Two sample initiatives--building family engagement and prevention of adverse medication events--illustrate the program's successes and challenges. Developing a pediatric safety and quality program across two campuses has been challenging but has led to important improvements at both organizations.

Vehicle track interaction safety standards

DOT National Transportation Integrated Search

2014-04-02

Vehicle/Track Interaction (VTI) Safety Standards aim to : reduce the risk of derailments and other accidents attributable : to the dynamic interaction between moving vehicles and the : track over which they operate. On March 13, 2013, the Federal : R...

Food Safety in the National School Lunch Program. USDA Food and Nutrition Service

ERIC Educational Resources Information Center

US Department of Agriculture, 2010

2010-01-01

Schools that serve meals under the National School Lunch Program (NSLP) and School Breakfast Program (SBP) are required to maintain proper sanitation and health standards in conformance with all applicable State and local laws and regulations. In addition, schools are required to obtain two school food safety inspections per school year, which are…

78 FR 37706 - Safety Standards for Infant Walkers and Infant Swings

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-24

... Danny Keysar Child Product Safety Notification Act, if ASTM revises the underlying voluntary standard... CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Parts 1216 and 1223 Safety Standards for Infant Walkers... the Danny Keysar Child Product Safety Notification Act, the U.S. Consumer Product Safety Commission...

Improving compliance with Occupational Safety and Health Administration standards.

PubMed

Cuming, Richard; Rocco, Tonette S; McEachern, Adriana G

2008-02-01

Health care facilities can be dangerous places. The mission of the Occupational Safety and Health Administration (OSHA) is to improve the safety of the American workplace by developing and implementing standards that prevent occupational injury, illness, and death. Perioperative services are performed in environments where exposure to bloodborne pathogens is a daily occurrence, making implementation and compliance with OSHA standards very important. Employees and employers must remain current with workplace safety requirements, including use of personal protective equipment. This article presents implications of the OSHA standards for employers, educators, and employees.

Cultivating quality: implementing standardized reporting and safety checklists.

PubMed

Stevens, James D; Bader, Mary Kay; Luna, Michele A; Johnson, Linda M

2011-05-01

Developing processes to create a culture of safety. It's estimated that as many as 98,000 hospitalized patients lose their lives each year in the United States because of medical errors that could have been prevented. While standardized reporting and safety checklists have been shown to improve communication and patient safety, implementation of these tools in hospitals remains challenging. To implement standardized nurse-to-nurse reporting along with safety checklists at Mission Hospital, a 522-bed facility in Mission Viejo, California, using Lewin's change theory and Knowles's adult learning theory. Nurses were tested to assess their knowledge of the standardized nurse-to-physician reporting method called SBAR (Situation, Background, Assessment, Recommendation), their understanding of the concept of the nurse-to-nurse reporting method called SBAP (Situation, Background, Assessment, Plan), and the use of safety checklists. Then, after viewing a 22-minute educational video, they were retested. A total of 482 nurses completed the pretest and posttest. On the pretest, the nurses' mean score was 15.935 points (SD, 3.529) out of 20. On the posttest, the mean score was 18.94 (SD, 1.53) out of 20. A Wilcoxon matched-pairs signed-rank test was performed; the two-tailed P value was < 0.001. The application of Lewin's change theory and Knowles's adult learning theory was successful in the process of implementing standardized nurse-to-nurse reporting and safety checklists at Mission Hospital.

Software Safety Risk in Legacy Safety-Critical Computer Systems

NASA Technical Reports Server (NTRS)

Hill, Janice L.; Baggs, Rhoda

2007-01-01

Safety Standards contain technical and process-oriented safety requirements. Technical requirements are those such as "must work" and "must not work" functions in the system. Process-Oriented requirements are software engineering and safety management process requirements. Address the system perspective and some cover just software in the system > NASA-STD-8719.13B Software Safety Standard is the current standard of interest. NASA programs/projects will have their own set of safety requirements derived from the standard. Safety Cases: a) Documented demonstration that a system complies with the specified safety requirements. b) Evidence is gathered on the integrity of the system and put forward as an argued case. [Gardener (ed.)] c) Problems occur when trying to meet safety standards, and thus make retrospective safety cases, in legacy safety-critical computer systems.

A Method for Developing Standard Patient Education Program.

PubMed

Lura, Carolina Bryne; Hauch, Sophie Misser Pallesgaard; Gøeg, Kirstine Rosenbeck; Pape-Haugaard, Louise

2018-01-01

In Denmark, patients being treated on Haematology Outpatients Departments get instructed to self-manage their blood sample collection from Central Venous Catheter (CVC). However, this is a complex and risky procedure, which can jeopardize patient safety. The aim of the study was to suggest a method for developing standard digital patient education programs for patients in self-administration of blood samples drawn from CVC. The Design Science Research Paradigm was used to develop a digital patient education program, called PAVIOSY, to increase patient safety during execution of the blood sample collection procedure by using videos for teaching as well as procedural support. A step-by-step guide was developed and used as basis for making the videos. Quality assurance through evaluation with a nurse was conducted on both the step-by-step guide and the videos. The quality assurance evaluation of the videos showed; 1) Errors due to the order of the procedure can be determined by reviewing the videos despite that the guide was followed. 2) Videos can be used to identify errors - important for patient safety - in the procedure, which are not identifiable in a written script. To ensure correct clinical content of the educational patient system, health professionals must be engaged early in the development of content and design phase.

75 FR 20038 - Railroad Safety Technology Grant Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-16

...] Railroad Safety Technology Grant Program AGENCY: Federal Railroad Administration, Department of Transportation. ACTION: Notice of Funds Availability, Railroad Safety Technology Program-Correction of Grant... Railroad Safety Technology Program, in the section, ``Requirements and Conditions for Grant Applications...

45 CFR 156.1110 - Establishment of patient safety standards for QHP issuers.

Code of Federal Regulations, 2014 CFR

2014-10-01

... STANDARDS RELATED TO EXCHANGES Quality Standards § 156.1110 Establishment of patient safety standards for QHP issuers. (a) Patient safety standards. A QHP issuer that contracts with a hospital with greater... 45 Public Welfare 1 2014-10-01 2014-10-01 false Establishment of patient safety standards for QHP...

78 FR 9623 - Federal Motor Vehicle Safety Standards; Air Brake Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-11

... [Docket No. NHTSA-2013-0011] RIN 2127-AL11 Federal Motor Vehicle Safety Standards; Air Brake Systems... rule that amended the Federal motor vehicle safety standard for air brake systems by requiring... published a final rule in the Federal Register amending Federal Motor Vehicle Safety Standard (FMVSS) No...

OSHA Laboratory Standard: Driving Force for Laboratory Safety!

ERIC Educational Resources Information Center

Roy, Kenneth R.

2000-01-01

Discusses the Occupational Safety and Health Administration's (OSHA's) Laboratory Safety Standards as the major driving force in establishing and maintaining a safe working environment for teachers and students. (Author)

Securing Safety - Spaceflight Standards for the Mass Market

NASA Astrophysics Data System (ADS)

Goh, G.

The projected total revenue of the space tourism industry is expected to exceed USD $1 billion by 2021. The vast economic potential of space tourism has fuelled ambitious plans for commercial orbital and suborbital flights, in addition to longer- duration spaceflights on board the International Space Station (ISS) and other planned orbiting habitats. International and national legal frameworks are challenged to provide regulations to ensure minimum standards of spaceflight safety for a high risk activity that aims to enter the mainstream tourism market. Thrown into the mix are various considerations of the number of spaceflight participants per flight, the economic viability of stringent safety standards, the plethora of possible flight vehicles and the compensation mechanism in case of violations of safety regulations. This paper surveys the legal challenges in the regulation of safety in commercial manned spaceflight, including issues of jurisdiction, authorization, licensing and liability. Drawing on analogous developments in other fields of law related to international carriage, a safety regulation framework with minimum international standards is proposed. This proposed framework considers both accident avoidance and emergency response in light of international legal, policy and economic perspectives.

Standards Participation Guidance : ITS Standards Program

DOT National Transportation Integrated Search

2018-04-15

The Intelligent Transportation System Joint Program Office (ITS JPO) focuses on research projects, exploratory studies and deployment support for the intelligent transportation system. The ITS Architecture and Standards Programs are foundational to t...

Radiologic Technology Program Standards.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This publication contains statewide standards for the radiologic technology program in Georgia. The standards are divided into 12 categories; Foundations (philosophy, purpose, goals, program objectives, availability, evaluation); Admissions (admission requirements, provisional admission requirements, recruitment, evaluation and planning); Program…

NREL Provides First-of-its-Kind Guidance Promoting Safety Standards for

Science.gov Websites

Promoting Safety Standards for Natural Gas Vehicle Maintenance Facilities NREL Provides First-of-its-Kind Guidance Promoting Safety Standards for Natural Gas Vehicle Maintenance Facilities December 1, 2017 The U.S vehicle maintenance facilities with a new handbook and webinar that outline safety factors and standards

NASA Aviation Safety Program Systems Analysis/Program Assessment Metrics Review

NASA Technical Reports Server (NTRS)

Louis, Garrick E.; Anderson, Katherine; Ahmad, Tisan; Bouabid, Ali; Siriwardana, Maya; Guilbaud, Patrick

2003-01-01

The goal of this project is to evaluate the metrics and processes used by NASA's Aviation Safety Program in assessing technologies that contribute to NASA's aviation safety goals. There were three objectives for reaching this goal. First, NASA's main objectives for aviation safety were documented and their consistency was checked against the main objectives of the Aviation Safety Program. Next, the metrics used for technology investment by the Program Assessment function of AvSP were evaluated. Finally, other metrics that could be used by the Program Assessment Team (PAT) were identified and evaluated. This investigation revealed that the objectives are in fact consistent across organizational levels at NASA and with the FAA. Some of the major issues discussed in this study which should be further investigated, are the removal of the Cost and Return-on-Investment metrics, the lack of the metrics to measure the balance of investment and technology, the interdependencies between some of the metric risk driver categories, and the conflict between 'fatal accident rate' and 'accident rate' in the language of the Aviation Safety goal as stated in different sources.

Pressure Safety Program Implementation at ORNL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lower, Mark; Etheridge, Tom; Oland, C. Barry

2013-01-01

The Oak Ridge National Laboratory (ORNL) is a US Department of Energy (DOE) facility that is managed by UT-Battelle, LLC. In February 2006, DOE promulgated worker safety and health regulations to govern contractor activities at DOE sites. These regulations, which are provided in 10 CFR 851, Worker Safety and Health Program, establish requirements for worker safety and health program that reduce or prevent occupational injuries, illnesses, and accidental losses by providing DOE contractors and their workers with safe and healthful workplaces at DOE sites. The regulations state that contractors must achieve compliance no later than May 25, 2007. According tomore » 10 CFR 851, Subpart C, Specific Program Requirements, contractors must have a structured approach to their worker safety and health programs that at a minimum includes provisions for pressure safety. In implementing the structured approach for pressure safety, contractors must establish safety policies and procedures to ensure that pressure systems are designed, fabricated, tested, inspected, maintained, repaired, and operated by trained, qualified personnel in accordance with applicable sound engineering principles. In addition, contractors must ensure that all pressure vessels, boilers, air receivers, and supporting piping systems conform to (1) applicable American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code (2004) Sections I through XII, including applicable code cases; (2) applicable ASME B31 piping codes; and (3) the strictest applicable state and local codes. When national consensus codes are not applicable because of pressure range, vessel geometry, use of special materials, etc., contractors must implement measures to provide equivalent protection and ensure a level of safety greater than or equal to the level of protection afforded by the ASME or applicable state or local codes. This report documents the work performed to address legacy pressure vessel deficiencies and

12 CFR Appendix C to Part 1720 - Policy Guidance; Safety and Soundness Standards for Information

Code of Federal Regulations, 2012 CFR

2012-01-01

... for Information C Appendix C to Part 1720 Banks and Banking OFFICE OF FEDERAL HOUSING ENTERPRISE..., App. C Appendix C to Part 1720—Policy Guidance; Safety and Soundness Standards for Information A... for Information 1. Information Security Program. 2. Objectives. C—Development and Implementation of...

12 CFR Appendix C to Part 1720 - Policy Guidance; Safety and Soundness Standards for Information

Code of Federal Regulations, 2010 CFR

2010-01-01

... for Information C Appendix C to Part 1720 Banks and Banking OFFICE OF FEDERAL HOUSING ENTERPRISE..., App. C Appendix C to Part 1720—Policy Guidance; Safety and Soundness Standards for Information A... for Information 1. Information Security Program. 2. Objectives. C—Development and Implementation of...

A Standardization Evaluation Potential Study of the Common Multi-Mode Radar Program.

DTIC Science & Technology

1979-11-01

Radar, the RX (RF-16 etc.), Enhanced Tactical Fighter ( ETF ), and A-7. Candidate radar systems applicable to the Common Multi-Mode Radar Program...RSTC R Resupply Time to Overseas Located Bases (hours) RSTO R Depot Stock Safety Factor (standard deviations) DLY R Shipping Time to Depot from CONUS

Post-licensure rapid immunization safety monitoring program (PRISM) data characterization.

PubMed

Baker, Meghan A; Nguyen, Michael; Cole, David V; Lee, Grace M; Lieu, Tracy A

2013-12-30

The Post-Licensure Rapid Immunization Safety Monitoring (PRISM) program is the immunization safety monitoring component of FDA's Mini-Sentinel project, a program to actively monitor the safety of medical products using electronic health information. FDA sought to assess the surveillance capabilities of this large claims-based distributed database for vaccine safety surveillance by characterizing the underlying data. We characterized data available on vaccine exposures in PRISM, estimated how much additional data was gained by matching with select state and local immunization registries, and compared vaccination coverage estimates based on PRISM data with other available data sources. We generated rates of computerized codes representing potential health outcomes relevant to vaccine safety monitoring. Standardized algorithms including ICD-9 codes, number of codes required, exclusion criteria and location of the encounter were used to obtain the background rates. The majority of the vaccines routinely administered to infants, children, adolescents and adults were well captured by claims data. Immunization registry data in up to seven states comprised between 5% and 9% of data for all vaccine categories with the exception of 10% for hepatitis B and 3% and 4% for rotavirus and zoster respectively. Vaccination coverage estimates based on PRISM's computerized data were similar to but lower than coverage estimates from the National Immunization Survey and Healthcare Effectiveness Data and Information Set. For the 25 health outcomes of interest studied, the rates of potential outcomes based on ICD-9 codes were generally higher than rates described in the literature, which are typically clinically confirmed cases. PRISM program's data on vaccine exposures and health outcomes appear complete enough to support robust safety monitoring. Copyright © 2013 Elsevier Ltd. All rights reserved.

SDDOT : safety program

DOT National Transportation Integrated Search

2000-05-01

The current safety and loss control program for the South Dakota Department of Transportation is not reaching its full potential and does not adequately prevent accidents and injuries. The Department has experienced an unacceptably high number of acc...

50 CFR 600.355 - National Standard 10-Safety of Life at Sea.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 50 Wildlife and Fisheries 8 2010-10-01 2010-10-01 false National Standard 10-Safety of Life at Sea... Standards § 600.355 National Standard 10—Safety of Life at Sea. (a) Standard 10. Conservation and management measures shall, to the extent practicable, promote the safety of human life at sea. (b) General. (1...

Laser safety considerations for a mobile laser program

NASA Astrophysics Data System (ADS)

Flor, Mary

1997-05-01

An increased demand for advanced laser technology, especially in the area of cutaneous and cosmetic procedures has prompted physicians to use mobile laser services. Utilization of a mobile laser service allows physicians to provide the latest treatments for their patients while minimizing overhead costs. The high capital expense of laser systems is often beyond the financial means of individual clinicians, group practices, free-standing clinics and smaller community hospitals. Historically rapid technology turnover with laser technology places additional risk which is unacceptable to many institutions. In addition, health care reform is mandating consolidation of equipment within health care groups to keep costs at a minimum. In 1994, Abbott Northwestern Hospital organized an in-house mobile laser technology service which employs a group of experienced laser specialists to deliver and support laser treatments for hospital outreach and other regional physicians and health care facilities. Many of the hospital's internal safety standards and policies are applicable to the mobile environment. A significant challenge is client compliance because of the delicate balance of managing risk while avoiding being viewed as a regulator. The clinics and hospitals are assessed prior to service to assure minimum laser safety standards for both the patient and the staff. A major component in assessing new sites is to inform them of applicable regulatory standards and their obligations to assure optimum laser safety. In service training is provided and hospital and procedures are freely shared to assist the client in establishing a safe laser environment. Physician and nursing preceptor programs are also made available.

FY 1991 safety program status report

NASA Technical Reports Server (NTRS)

1991-01-01

In FY 1991, the NASA Safety Division continued efforts to enhance the quality and productivity of its safety oversight function. Recent initiatives set forth in areas such as training, risk management, safety assurance, operational safety, and safety information systems have matured into viable programs contributing to the safety and success of activities throughout the Agency. Efforts continued to develop a centralized intra-agency safety training program with establishment of the NASA Safety Training Center at the Johnson Space Center (JSC). The objective is to provide quality training for NASA employees and contractors on a broad range of safety-related topics. Courses developed by the Training Center will be presented at various NASA locations to minimize travel and reach the greatest number of people at the least cost. In FY 1991, as part of the ongoing efforts to enhance the total quality of NASA's safety work force, the Safety Training Center initiated development of a Certified Safety Professional review course. This course provides a comprehensive review of the skills and knowledge that well-rounded safety professionals must possess to qualify for professional certification. FY 1992 will see the course presented to NASA and contractor employees at all installations via the NASA Video Teleconference System.

Critical Review of Commercial Secondary Lithium-Ion Battery Safety Standards

NASA Astrophysics Data System (ADS)

Jones, Harry P.; Chapin, Thomas, J.; Tabaddor, Mahmod

2010-09-01

The development of Li-ion cells with greater energy density has lead to safety concerns that must be carefully assessed as Li-ion cells power a wide range of products from consumer electronics to electric vehicles to space applications. Documented field failures and product recalls for Li-ion cells, mostly for consumer electronic products, highlight the risk of fire, smoke, and even explosion. These failures have been attributed to the occurrence of internal short circuits and the subsequent thermal runaway that can lead to fire and explosion. As packaging for some applications include a large number of cells, the risk of failure is likely to be magnified. To address concerns about the safety of battery powered products, safety standards have been developed. This paper provides a review of various international safety standards specific to lithium-ion cells. This paper shows that though the standards are harmonized on a host of abuse conditions, most lack a test simulating internal short circuits. This paper describes some efforts to introduce internal short circuit tests into safety standards.

State funding of alcohol safety countermeasure programs

DOT National Transportation Integrated Search

1979-09-01

This study was to analyze current State practices in funding State alcohol highway safety programs. The results were intended to provide guidelines for establishing and improving self-sustaining alcohol safety programs. The literature was reviewed an...

NCRP Program Area Committee 2: Operational Radiation Safety

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pryor, Kathryn H.; Goldin, Eric M.

2016-02-29

Program Area Committee 2 of the National Council on Radiation Protection and Measurements provides guidance for radiation safety in occupational settings in a variety of industries and activities. The committee completed three reports in recent years covering recommendations for the development and administration of radiation safety programs for smaller educational institutions, requirements for self-assessment programs that improve radiation safety and identify and correct deficiencies, and a comprehensive process for effective investigation of radiological incidents. Ongoing work includes a report on sealed radioactive source controls and oversight of a report on radioactive nanomaterials focusing on gaps within current radiation safety programs.more » Future efforts may deal with operational radiation safety programs in fields such as the safe use of handheld and portable X-Ray fluorescence analyzers, occupational airborne radioactive contamination, unsealed radioactive sources, or industrial accelerators.« less

16 CFR 1115.8 - Compliance with product safety standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... applicable mandatory consumer product safety standards and to report to the Commission any products which do.... 1115.8 Section 1115.8 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SUBSTANTIAL PRODUCT HAZARD REPORTS General Interpretation § 1115.8 Compliance with...

The Department of Energy Nuclear Criticality Safety Program

NASA Astrophysics Data System (ADS)

Felty, James R.

2005-05-01

This paper broadly covers key events and activities from which the Department of Energy Nuclear Criticality Safety Program (NCSP) evolved. The NCSP maintains fundamental infrastructure that supports operational criticality safety programs. This infrastructure includes continued development and maintenance of key calculational tools, differential and integral data measurements, benchmark compilation, development of training resources, hands-on training, and web-based systems to enhance information preservation and dissemination. The NCSP was initiated in response to Defense Nuclear Facilities Safety Board Recommendation 97-2, Criticality Safety, and evolved from a predecessor program, the Nuclear Criticality Predictability Program, that was initiated in response to Defense Nuclear Facilities Safety Board Recommendation 93-2, The Need for Critical Experiment Capability. This paper also discusses the role Dr. Sol Pearlstein played in helping the Department of Energy lay the foundation for a robust and enduring criticality safety infrastructure.

Health and safety programs for art and theater schools.

PubMed

McCann, M

2001-01-01

A wide variety of health and safety hazards exist in schools and colleges of art and theater due to a lack of formal health and safety programs and a failure to include health and safety concerns during planning of new facilities and renovation of existing facilities. This chapter discusses the elements of a health and safety program as well as safety-related structural and equipment needs that should be in the plans for any school of art or theater. These elements include curriculum content, ventilation, storage, housekeeping, waste management, fire and explosion prevention, machine and tool safety, electrical safety, noise, heat stress, and life safety and emergency procedures and equipment. Ideally, these elements should be incorporated into the plans for any new facilities, but ongoing programs can also benefit from a review of existing health and safety programs.

75 FR 22317 - Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-28

... 1300 [Docket No. NHTSA-2010-0054] Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety AGENCY: National Highway Traffic Safety Administration (NHTSA), Department of..., multipurpose passenger vehicles, trucks, buses, trailers, incomplete vehicles, motorcycles, and motor vehicle...

77 FR 69586 - Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-20

... [Docket No. NHTSA-2012-0155] Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety AGENCY: National Highway Traffic Safety Administration (NHTSA), Department of..., multipurpose passenger vehicles, trucks, buses, trailers, motorcycles, and motor vehicle equipment. DATES: You...

National child safety seat distribution program evaluation

DOT National Transportation Integrated Search

1999-03-01

The National Child Safety Seat Distribution Program (NCSS) was a multi-year, multi-phase program intended to distribute $8 million in child safety seats to low-income and special needs children in all fifty states. Non-profit organizations that recei...

Laser safety programs in general surgery.

PubMed

Lanzafame, R J

1994-06-01

General surgery represents a speciality where, while any procedure can be performed with lasers, there are no procedures for which the laser is the sine quo non. The general surgeon may perform a variety of procedures with a multitude of laser wavelengths and technologies. Laser safety in general surgery requires a multidisciplinary approach. Effective laser safety requires the oversight of the hospital's "laser usage committee" and "laser safety officer" while providing a workable framework for daily laser use in a variety of clinical scenarios simultaneously. This framework must be user-friendly rather than oppressive. This presentation will describe laser safety at the Rochester General Hospital, a tertiary care, community-based teaching hospital. The safety program incorporates the following components: input to physician credentialing and training, education and in-servicing of nursing and technical personnel, equipment purchase and maintenance, quality assurance, and safety monitoring. The University of Rochester general surgery residency training program mandates laser training during the PGY-2 year. This program stresses the safe use of lasers and provides the basis for graded hands-on experience during the surgical residency. The greatest challenge for laser safety in general surgery centers on the burgeoning field of minimally invasive surgery. Safety assurance must be balanced so as to maintain a safe operating-room environment while ensuring patient safety and the ability to permit the surgery to proceed efficiently. Safety measures for laparoscopic procedures must be sensitive to the needs of the surgical team while not providing confusing signals for the "gallery" observers. This task is critical for the safe operation of lasers in general surgery. Effective laser safety in general surgery requires constant vigilance tempered with sensitivity to the needs of the surgeon and the patient as laser technology and its applications continue to evolve.

Medicare and Medicaid programs; fire safety requirements for certain health care facilities. Final rule.

PubMed

2003-01-10

This final rule amends the fire safety standards for hospitals, long-term care facilities, intermediate care facilities for the mentally retarded, ambulatory surgery centers, hospices that provide inpatient services, religious nonmedical health care institutions, critical access hospitals, and Programs of All-Inclusive Care for the Elderly facilities. Further, this final rule adopts the 2000 edition of the Life Safety Code and eliminates references in our regulations to all earlier editions.

78 FR 76265 - Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-17

... Through 578, Except Parts 571 and 575 [Docket No. NHTSA-2013-0116] Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety AGENCY: National Highway Traffic Safety Administration... passenger cars, multipurpose passenger vehicles, trucks, buses, trailers, motorcycles, and motor vehicle...

75 FR 76692 - Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-09

..., 510, 511, 512, 520, 523, 525, 526, and 571 [Docket No. NHTSA-2010-0159] Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety AGENCY: National Highway Traffic Safety... that specifically relate to passenger cars, multipurpose passenger vehicles, trucks, buses, trailers...

75 FR 73946 - Worker Safety and Health Program: Safety Conscious Work Environment

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-30

... DEPARTMENT OF ENERGY 10 CFR Part 851 Worker Safety and Health Program: Safety Conscious Work... Nuclear Regulatory Commission's ``Safety-Conscious Work Environment'' guidelines as a model. DOE published.... Second, not only would instituting a ``Safety-Conscious Work Environment'' by regulation be redundant...

Using Contemporary Leadership Skills in Medication Safety Programs.

PubMed

Hertig, John B; Hultgren, Kyle E; Weber, Robert J

2016-04-01

The discipline of studying medication errors and implementing medication safety programs in hospitals dates to the 1970s. These initial programs to prevent errors focused only on pharmacy operation changes - and not the broad medication use system. In the late 1990s, research showed that faulty systems, and not faulty people, are responsible for errors and require a multidisciplinary approach. The 2013 ASHP Statement on the Role of the Medication Safety Leader recommended that medication safety leaders be integrated team members rather than a single point of contact. Successful medication safety programs must employ a new approach - one that embraces the skills of all health care team members and positions many leaders to improve safety. This approach requires a new set of leadership skills based on contemporary management principles, including followership, team-building, tracking and assessing progress, storytelling and communication, and cultivating innovation, all of which promote transformational change. The application of these skills in developing or changing a medication safety program is reviewed in this article.

A comprehensive obstetric patient safety program reduces liability claims and payments.

PubMed

Pettker, Christian M; Thung, Stephen F; Lipkind, Heather S; Illuzzi, Jessica L; Buhimschi, Catalin S; Raab, Cheryl A; Copel, Joshua A; Lockwood, Charles J; Funai, Edmund F

2014-10-01

Begun in 2003, the Yale-New Haven Hospital comprehensive obstetric safety program consisted of measures to standardize care, improve teamwork and communication, and optimize oversight and quality review. Prior publications have demonstrated improvements in adverse outcomes and safety culture associated with this program. In this analysis, we aimed to assess the impact of this program on liability claims and payments at a single institution. We reviewed liability claims at a single, tertiary-care, teaching hospital for two 5-year periods (1998-2002 and 2003-2007), before and after implementing the safety program. Connecticut statute of limitations for professional malpractice is 36 months from injury. Claims/events were classified by event-year and payments were adjusted for inflation. We analyzed data for trends as well as differences between periods before and after implementation. Forty-four claims were filed during the 10-year study period. Annual cases per 1000 deliveries decreased significantly over the study period (P < .01). Claims (30 vs 14) and payments ($50.7 million vs $2.9 million) decreased in the 5-years after program inception. Compared with before program inception, median annual claims dropped from 1.31 to 0.64 (P = .02), and median annual payments per 1000 deliveries decreased from $1,141,638 to $63,470 (P < .01). Even estimating the monetary awards for the 2 remaining open cases using the median payments for the surrounding 5 years, a reduction in the median monetary amount per case resulting in payment to the claimant was also statistically significant ($632,262 vs $216,815, P = .046). In contrast, the Connecticut insurance market experienced a stable number of claims and markedly increased cost per claim during the same period. We conclude that an obstetric safety initiative can improve liability claims exposure and reduce liability payments. Copyright © 2014 Elsevier Inc. All rights reserved.

30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

76 FR 72888 - Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-28

... pedestrian safety devices. 571.217 Bus emergency exits and window retention and release. 571.220 School bus... DEPARTMENT OF TRANSPORTATION National Highway Traffic Safety Administration 49 CFR Part 571 [Docket No. NHTSA-2011-0160] Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor...

Discussion on the Criterion for the Safety Certification Basis Compilation - Brazilian Space Program Case

NASA Astrophysics Data System (ADS)

Niwa, M.; Alves, N. C.; Caetano, A. O.; Andrade, N. S. O.

2012-01-01

The recent advent of the commercial launch and re- entry activities, for promoting the expansion of human access to space for tourism and hypersonic travel, in the already complex ambience of the global space activities, brought additional difficulties over the development of a harmonized framework of international safety rules. In the present work, with the purpose of providing some complementary elements for global safety rule development, the certification-related activities conducted in the Brazilian space program are depicted and discussed, focusing mainly on the criterion for certification basis compilation. The results suggest that the composition of a certification basis with the preferential use of internationally-recognized standards, as is the case of ISO standards, can be a first step toward the development of an international safety regulation for commercial space activities.

Consumer Product Safety Commission. Consumer Education Efforts for Revised Children's Sleepwear Safety Standard.

ERIC Educational Resources Information Center

General Accounting Office, Washington, DC. Health, Education, and Human Services Div.

A study examined the type and extent of consumer education that occurred since the Consumer Product Safety Commission (CPSC) amended the 1972 federal safety standards (effective January 1997) to permit marketing of snug-fitting, nonflame-resistant cotton garments as sleepwear. Three voluntary point-of-sale (POS) practices recognized as important…

Avionics Maintenance Technology Program Standards.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This publication contains statewide standards for the avionics maintenance technology program in Georgia. The standards are divided into the following categories: foundations, diploma/degree (philosophy, purpose, goals, program objectives, availability, evaluation); admissions, diploma/degree (admission requirements, provisional admission…

Analysis of medical screening and surveillance in 21 Occupational Safety and Health Administration standards: support for a generic medical surveillance standard.

PubMed

Silverstein, M

1994-09-01

Twenty-one Occupational Safety and Health Act (OSHA) standards were identified which contain medical service provisions intended to help in the identification and control of harmful health effects of workplace exposures. The utility and effectiveness of these provisions have not previously been evaluated. All 21 standards were reviewed and assigned numerical scores for each of 24 potential medical program elements. Several of these elements were combined to calculate Quality Control, Screening Utility, and Surveillance Utility scores for each standard. Total scores varied greatly, suggesting a lack of consistency and uniformity which was even more obvious when the actual regulatory language was examined. The mean Quality score was only 26% of potential points. Seventeen of 21 standards received less than half the total possible Quality score. When arrayed on a two by two matrix only two standards scored above 50% for both Screening and Surveillance Utility. It was concluded that the medical service provisions in OSHA standards are lacking in consistency and coherence. Two major shortcomings are the lack of quality control elements and the absence of surveillance features which would permit medical program results to be utilized for prevention activities including the identification and control of workplace hazards. A generic occupational medical surveillance standard could address these current weaknesses. Elements of such a generic standard are proposed.

Medication safety programs in primary care: a scoping review.

PubMed

Khalil, Hanan; Shahid, Monica; Roughead, Libby

2017-10-01

Medication safety plays an essential role in all healthcare organizations; improving this area is paramount to quality and safety of any wider healthcare program. While several medication safety programs in the hospital setting have been described and the associated impact on patient safety evaluated, no systematic reviews have described the impact of medication safety programs in the primary care setting. A preliminary search of the literature demonstrated that no systematic reviews, meta-analysis or scoping reviews have reported on medication safety programs in primary care; instead they have focused on specific interventions such as medication reconciliation or computerized physician order entry. This scoping review sought to map the current medication safety programs used in primary care. The current scoping review sought to examine the characteristics of medication safety programs in the primary care setting and to map evidence on the outcome measures used to assess the effectiveness of medication safety programs in improving patient safety. The current review considered participants of any age and any condition using care obtained from any primary care services. We considered studies that focussed on the characteristics of medication safety programs and the outcome measures used to measure the effectiveness of these programs on patient safety in the primary care setting. The context of this review was primary care settings, primary healthcare organizations, general practitioner clinics, outpatient clinics and any other clinics that do not classify patients as inpatients. We considered all quantitative studied published in English. A three-step search strategy was utilized in this review. Data were extracted from the included studies to address the review question. The data extracted included type of medication safety program, author, country of origin, aims and purpose of the study, study population, method, comparator, context, main findings and outcome

Evaluation of a standardized all-terrain vehicle safety education intervention for youth in rural Central Illinois.

PubMed

Novak, Joshua A; Hafner, John W; Aldag, Jean C; Getz, Marjorie A

2013-01-01

Although research investigating all-terrain vehicle (ATV) riders and ATV injury patterns has led to support for legislative and educational efforts to decrease injuries in users younger than 16 years, there is little published data regarding the utility of ATV safety education programs. This study investigates the effectiveness of a standardized adolescent ATV safety program in changing the safety knowledge and safe ATV riding practices reported by rural Central Illinois youths. A convenience sample of 260 rural Central Illinois middle and high school students received an ATV safety presentation with both didactic and interactive features during the 2009-2010 school year. Preintervention and postintervention surveys were distributed and collected by teachers. Survey questions consisted of multiple-choice questions pertaining to demographics, ATV safety knowledge, and ATV riding practices. More than 200 surveys were collected prior to the intervention and 165 surveys were collected 12 to 24 weeks after the intervention. Percentages are reported, with differences in nominal variables tested by χ(2) test and interval variables by t test. Following the intervention, there was a significant increase in the correct response rate for ATV safety knowledge questions (45.2% vs 56.2%, P < .001). For adolescents who reported riding ATVs, both safety gear use (11.8% to 21.2%, P = .05) and helmet use (25.4% to 29.0%, P = .56) increased; changes were not significant. Adolescent ATV riders reporting 2 or more accidents showed a slight nonsignificant decrease (25.2% vs 23.4%, P = .77) between the time of the pretest and posttest. This safety program was effective at increasing ATV safety knowledge but demonstrates limited effect on safe riding practices.

49 CFR 659.19 - System safety program plan: contents.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 7 2012-10-01 2012-10-01 false System safety program plan: contents. 659.19... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the State Oversight Agency § 659.19 System safety program plan: contents. The system safety plan shall...

49 CFR 659.19 - System safety program plan: contents.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 7 2011-10-01 2011-10-01 false System safety program plan: contents. 659.19... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the State Oversight Agency § 659.19 System safety program plan: contents. The system safety plan shall...

49 CFR 659.19 - System safety program plan: contents.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 7 2013-10-01 2013-10-01 false System safety program plan: contents. 659.19... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the State Oversight Agency § 659.19 System safety program plan: contents. The system safety plan shall...

49 CFR 659.19 - System safety program plan: contents.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 7 2014-10-01 2014-10-01 false System safety program plan: contents. 659.19... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the State Oversight Agency § 659.19 System safety program plan: contents. The system safety plan shall...

49 CFR 659.19 - System safety program plan: contents.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false System safety program plan: contents. 659.19... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the State Oversight Agency § 659.19 System safety program plan: contents. The system safety plan shall...

Connoted hazard and perceived importance of fluorescent, neon, and standard safety colors.

PubMed

Zielinska, O A; Mayhorn, C B; Wogalter, M S

2017-11-01

The perceived hazard and rated importance of standard safety, fluorescent, and neon colors are investigated. Colors are used in warnings to enhance hazard communication. Red has consistently been rated as the highest in perceived hazard. Orange, yellow, and black are the next highest in connoted hazard; however, there is discrepancy in their ordering. Safety standards, such as ANSI Z535.1, also list colors to convey important information, but little research has examined the perceived importance of colors. In addition to standard safety colors, fluorescent colors are more commonly used in warnings. Understanding hazard and importance perceptions of standard safety and fluorescent colors is necessary to create effective warnings. Ninety participants rated and ranked a total of 33 colors on both perceived hazard and perceived importance. Rated highest were the safety red colors from the American National Standard Institute (ANSI), International Organization for Standardization (ISO), and Federal Highway Administration (FHWA) together with three fluorescent colors (orange, yellow, and yellow-green) from 3 M on both dimensions. Rankings were similar to ratings except that fluorescent orange was the highest on perceived hazard, while fluorescent orange and safety red from the ANSI were ranked as the highest in perceived importance. Fluorescent colors convey hazard and importance levels as high as the standard safety red colors. Implications for conveying hazard and importance in warnings through color are discussed. Copyright © 2017 Elsevier Ltd. All rights reserved.

Occupational Safety and Health Programs in Career Education.

ERIC Educational Resources Information Center

DiCarlo, Robert D.; And Others

This resource guide was developed in response to the Occupational Safety and Health Act of 1970 and is intended to assist teachers in implementing courses in occupational safety and health as part of a career education program. The material is a synthesis of films, programed instruction, slides and narration, case studies, safety pamphlets,…

Using Contemporary Leadership Skills in Medication Safety Programs

PubMed Central

Hertig, John B.; Hultgren, Kyle E.; Weber, Robert J.

2016-01-01

The discipline of studying medication errors and implementing medication safety programs in hospitals dates to the 1970s. These initial programs to prevent errors focused only on pharmacy operation changes – and not the broad medication use system. In the late 1990s, research showed that faulty systems, and not faulty people, are responsible for errors and require a multidisciplinary approach. The 2013 ASHP Statement on the Role of the Medication Safety Leader recommended that medication safety leaders be integrated team members rather than a single point of contact. Successful medication safety programs must employ a new approach – one that embraces the skills of all health care team members and positions many leaders to improve safety. This approach requires a new set of leadership skills based on contemporary management principles, including followership, team-building, tracking and assessing progress, storytelling and communication, and cultivating innovation, all of which promote transformational change. The application of these skills in developing or changing a medication safety program is reviewed in this article. PMID:27303083

OSHA Training Programs. Module SH-48. Safety and Health.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on OSHA (Occupational Safety and Health Act) training programs is one of 50 modules concerned with job safety and health. This module provides a list of OSHA training requirements and describes OSHA training programs and other safety organizations' programs. Following the introduction, 11 objectives (each keyed to a page in the…

Business Education. Vocational Education Program Courses Standards.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Vocational, Adult, and Community Education.

This document contains vocational education program courses standards (curriculum frameworks and student performance standards) for business technology education programs in Florida. Each program courses standard is composed of two parts: a curriculum framework and student performance standards. The curriculum framework includes four major…

30 CFR 6.30 - MSHA listing of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false MSHA listing of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.30 MSHA listing of equivalent non-MSHA product safety standards. MSHA evaluated the following non-MSHA product safety standards and determined that they provide...

30 CFR 6.30 - MSHA listing of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false MSHA listing of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.30 MSHA listing of equivalent non-MSHA product safety standards. MSHA evaluated the following non-MSHA product safety standards and determined that they provide...

30 CFR 6.30 - MSHA listing of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false MSHA listing of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.30 MSHA listing of equivalent non-MSHA product safety standards. MSHA evaluated the following non-MSHA product safety standards and determined that they provide...

30 CFR 6.30 - MSHA listing of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false MSHA listing of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.30 MSHA listing of equivalent non-MSHA product safety standards. MSHA evaluated the following non-MSHA product safety standards and determined that they provide...

30 CFR 6.30 - MSHA listing of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false MSHA listing of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.30 MSHA listing of equivalent non-MSHA product safety standards. MSHA evaluated the following non-MSHA product safety standards and determined that they provide...

75 FR 15484 - Railroad Safety Technology Program Grant Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-29

... governments for projects that have a public benefit of improved railroad safety and efficiency. The program... State and local governments for projects * * * that have a public benefit of improved safety and network... minimum 20 percent grantee cost share (cash or in-kind) match requirement. DATES: FRA will begin accepting...

19 CFR 12.85 - Coast Guard boat and associated equipment safety standards.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Coast Guard boat and associated equipment safety... SECURITY; DEPARTMENT OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Safety Standards for Boats and Associated Equipment § 12.85 Coast Guard boat and associated equipment safety standards. (a) Applicability of...

19 CFR 12.85 - Coast Guard boat and associated equipment safety standards.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Coast Guard boat and associated equipment safety... SECURITY; DEPARTMENT OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Safety Standards for Boats and Associated Equipment § 12.85 Coast Guard boat and associated equipment safety standards. (a) Applicability of...

19 CFR 12.85 - Coast Guard boat and associated equipment safety standards.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Coast Guard boat and associated equipment safety... SECURITY; DEPARTMENT OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Safety Standards for Boats and Associated Equipment § 12.85 Coast Guard boat and associated equipment safety standards. (a) Applicability of...

19 CFR 12.85 - Coast Guard boat and associated equipment safety standards.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Coast Guard boat and associated equipment safety... SECURITY; DEPARTMENT OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Safety Standards for Boats and Associated Equipment § 12.85 Coast Guard boat and associated equipment safety standards. (a) Applicability of...

19 CFR 12.85 - Coast Guard boat and associated equipment safety standards.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Coast Guard boat and associated equipment safety... SECURITY; DEPARTMENT OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Safety Standards for Boats and Associated Equipment § 12.85 Coast Guard boat and associated equipment safety standards. (a) Applicability of...

Technology Education. Vocational Education Program Courses Standards.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Vocational, Adult, and Community Education.

This document contains vocational education program course standards for technology education programs in Florida. Standards are provided for a total of 32 exploratory courses, practical arts courses, and pretechnical programs offered at the secondary or postsecondary level. Each program course standard consists of a curriculum framework and…

Program Helps Standardize Documentation Of Software

NASA Technical Reports Server (NTRS)

Howe, G.

1994-01-01

Intelligent Documentation Management System, IDMS, computer program developed to assist project managers in implementing information system documentation standard known as NASA-STD-2100-91, NASA STD, COS-10300, of NASA's Software Management and Assurance Program. Standard consists of data-item descriptions or templates, each of which governs particular component of software documentation. IDMS helps program manager in tailoring documentation standard to project. Written in C language.

Bear Spray Safety Program

USGS Publications Warehouse

Blome, C.D.; Kuzniar, R.L.

2009-01-01

A bear spray safety program for the U.S. Geological Survey (USGS) was officially initiated by the Firearms Safety Committee to address accident prevention and to promote personnel training in bear spray and its transportation, storage, and use for defense against wild animals. Used as part of a system including firearms, or used alone for those who choose not to carry a firearm, bear spray is recognized as an effective tool that can prevent injury in a wild animal attack.

76 FR 55825 - Federal Motor Vehicle Safety Standards, Child Restraint Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-09

... [Docket No. NHTSA-2011-0139] RIN 2127-AJ44 Federal Motor Vehicle Safety Standards, Child Restraint Systems..., amends a provision in Federal Motor Vehicle Safety Standard No. 213, ``Child restraint systems,'' that... forces, accelerations, moments and deflections, which are crucial in evaluating vehicle occupant...

75 FR 15620 - Federal Motor Vehicle Safety Standards; Air Brake Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-30

... fully develop improved brake systems and also to ensure vehicle control and stability while braking... [Docket No. NHTSA 2009-0175] RIN 2127-AK62 Federal Motor Vehicle Safety Standards; Air Brake Systems... Federal motor vehicle safety standard for air brake systems by requiring substantial improvements in...

Standards for Adult Education ESL Programs

ERIC Educational Resources Information Center

TESOL Press, 2013

2013-01-01

What are the components of a quality education ESL program? TESOL's "Standards for Adult Education ESL Programs" answers this question by defining quality components from a national perspective. Using program indicators in eight distinct areas, the standards can be used to review an existing program or as a guide in setting up a new…

29 CFR 1960.18 - Supplementary standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... occupational safety and health committees. If the Secretary finds the permanent supplementary standard to be...

29 CFR 1960.18 - Supplementary standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... occupational safety and health committees. If the Secretary finds the permanent supplementary standard to be...

Primer on the Highway Safety Improvement Program (HSIP)

DOT National Transportation Integrated Search

2014-09-16

The Highway Safety Improvement Program (HSIP) is a core Federal-aid program for State Departments of Transportation (State DOTs) administered by the Federal Highway Administration (FHWA). This is a major source of funding for safety projects on the n...

New conducted electrical weapons: Electrical safety relative to relevant standards.

PubMed

Panescu, Dorin; Nerheim, Max; Kroll, Mark W; Brave, Michael A

2017-07-01

We have previously published about TASER ® conducted electrical weapons (CEW) compliance with international standards. CEWs deliver electrical pulses that can inhibit a person's neuromuscular control or temporarily incapacitate. An eXperimental Rotating-Field (XRF) waveform CEW and the X2 CEW are new 2-shot electrical weapon models designed to target a precise amount of delivered charge per pulse. They both can deploy 1 or 2 dart pairs, delivered by 2 separate cartridges. Additionally, the XRF controls delivery of incapacitating pulses over 4 field vectors, in a rotating sequence. As in our previous study, we were motivated by the need to understand the cardiac safety profile of these new CEWs. The goal of this paper is to analyze the nominal electrical outputs of TASER XRF and X2 CEWs in reference to provisions of all relevant international standards that specify safety requirements for electrical medical devices and electrical fences. Although these standards do not specifically mention CEWs, they are the closest electrical safety standards and hence give very relevant guidance. The outputs of several TASER XRF and X2 CEWs were measured under normal operating conditions. The measurements were compared against manufacturer specifications. CEWs electrical output parameters were reviewed against relevant safety requirements of UL 69, IEC 60335-2-76 Ed 2.1, IEC 60479-1, IEC 60479-2, AS/NZS 60479.1, AS/NZS 60479.2, IEC 60601-1 and BS EN 60601-1. Our study confirmed that the nominal electrical outputs of TASER XRF and X2 CEWs lie within safety bounds specified by relevant standards.

Research notes : are safety corridors really safe? Evaluation of the corridor safety improvement program.

DOT National Transportation Integrated Search

1998-08-26

High accident frequencies on Oregons highway corridors are of concern to the Oregon Department of Transportation (ODOT). : ODOT adopted the Corridor Safety Improvement Program as part of an overall program of safety improvements using federal and ...

ASME Nuclear Crane Standards for Enhanced Crane Safety and Increased Profit

NASA Astrophysics Data System (ADS)

Parkhurst, Stephen N.

2000-01-01

The ASME NOG-1 standard, 'Rules for Construction of Overhead and Gantry Cranes', covers top running cranes for nuclear facilities; with the ASME NUM-1 standard, 'Rules for Construction of Cranes, Monorails, and Hoists', covering the single girder, underhung, wall and jib cranes, as well as the monorails and hoists. These two ASME nuclear crane standards provide criteria for designing, inspecting and testing overhead handling equipment with enhanced safety to meet the 'defense-in-depth' approach of the United States Nuclear Regulatory Commission (USNRC) documents NUREG 0554 and NUREG 0612. In addition to providing designs for enhanced safety, the ASME nuclear crane standards provide a basis for purchasing overhead handling equipment with standard safety features, based upon accepted engineering principles, and including performance and environmental parameters specific to nuclear facilities. The ASME NOG-1 and ASME NUM-1 standards not only provide enhanced safety for handling a critical load, but also increase profit by minimizing the possibility of load drops, by reducing cumbersome operating restrictions, and by providing the foundation for a sound licensing position. The ASME nuclear crane standards can also increase profit by providing the designs and information to help ensure that the right standard equipment is purchased. Additionally, the ASME nuclear crane standards can increase profit by providing designs and information to help address current issues, such as the qualification of nuclear plant cranes for making 'planned engineered lifts' for steam generator replacement and decommissioning.

76 FR 57635 - Restrictions on Operators Employing Former Flight Standards Service Aviation Safety Inspectors...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-16

... Standards Service Aviation Safety Inspectors; Correction AGENCY: Federal Aviation Administration (FAA), DOT... ``Restrictions on Operators Employing Former Flight Standards Service Aviation Safety Inspectors'' (76 FR 52231... of, a Flight Standards Service Aviation Safety Inspector, and had direct responsibility to inspect...

76 FR 44829 - Federal Motor Vehicle Safety Standards; Air Brake Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-27

... [Docket No. NHTSA-2009-0175] RIN 2127-AK84 Federal Motor Vehicle Safety Standards; Air Brake Systems... final rule that amended the Federal motor vehicle safety standard for air brake systems by requiring... July 27, 2009, NHTSA published a final rule in the Federal Register amending Federal Motor Vehicle...

Technical Standards for Nursing Education Programs in the 21st Century.

PubMed

Ailey, Sarah H; Marks, Beth

The Institute of Medicine (2000, 2002) exposed serious safety problems in the health system and called for total qualitative system change. The Institute of Medicine (2011, 2015) also calls for improving the education of nurses to provide leadership for a redesigned health system. Intertwined with improving education is the need to recruit and retain diverse highly qualified students. Disability is part of diversity inclusion, but current technical standards (nonacademic requirements) for admission to many nursing programs are a barrier to the entry of persons with disabilities. Rehabilitation nurse leaders are in a unique position to improve disability diversity in nursing. The purpose of this paper is to discuss the importance of disability diversity in nursing. The history of existing technical standards used in many nursing programs is reviewed along with examples. On the basis of the concept that disability inclusion is a part of diversity inclusion, we propose a new model of technical standards for nursing education. Rehabilitation nurse leaders can lead in eliminating barriers to persons with disabilities entering nursing.

50 CFR 600.355 - National Standard 10-Safety of Life at Sea.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Sea. 600.355 Section 600.355 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL... Standards § 600.355 National Standard 10—Safety of Life at Sea. (a) Standard 10. Conservation and management measures shall, to the extent practicable, promote the safety of human life at sea. (b) General. (1...

John F. Kennedy Space Center, Safety, Reliability, Maintainability and Quality Assurance, Survey and Audit Program

NASA Technical Reports Server (NTRS)

1994-01-01

This document is the product of the KSC Survey and Audit Working Group composed of civil service and contractor Safety, Reliability, and Quality Assurance (SR&QA) personnel. The program described herein provides standardized terminology, uniformity of survey and audit operations, and emphasizes process assessments rather than a program based solely on compliance. The program establishes minimum training requirements, adopts an auditor certification methodology, and includes survey and audit metrics for the audited organizations as well as the auditing organization.

Safety Standards Plan for Middlesex County Vocational & Technical High Schools.

ERIC Educational Resources Information Center

Sommer, Cy

This vocational education safety standards plan outlines rules and regulations adopted by the Board of Education of Middlesex County Vocational and Technical High Schools. The first of eleven chapters presents demographics and a safety organization table for Middlesex County Vocational and Technical Schools. In chapter 2, six safety program…

Range Flight Safety Requirements

NASA Technical Reports Server (NTRS)

Loftin, Charles E.; Hudson, Sandra M.

2018-01-01

The purpose of this NASA Technical Standard is to provide the technical requirements for the NPR 8715.5, Range Flight Safety Program, in regards to protection of the public, the NASA workforce, and property as it pertains to risk analysis, Flight Safety Systems (FSS), and range flight operations. This standard is approved for use by NASA Headquarters and NASA Centers, including Component Facilities and Technical and Service Support Centers, and may be cited in contract, program, and other Agency documents as a technical requirement. This standard may also apply to the Jet Propulsion Laboratory or to other contractors, grant recipients, or parties to agreements to the extent specified or referenced in their contracts, grants, or agreements, when these organizations conduct or participate in missions that involve range flight operations as defined by NPR 8715.5.1.2.2 In this standard, all mandatory actions (i.e., requirements) are denoted by statements containing the term “shall.”1.3 TailoringTailoring of this standard for application to a specific program or project shall be formally documented as part of program or project requirements and approved by the responsible Technical Authority in accordance with NPR 8715.3, NASA General Safety Program Requirements.

Pilot education and safety awareness programs

NASA Technical Reports Server (NTRS)

Shearer, M.; Reynard, W. D.

1984-01-01

Guidelines necessary for the implementation of safety awareness programs for commuter airlines are discussed. A safety office can be viewed as fulfilling either an education and training function or a quality assurance function. Issues such as management structure, motivation, and cost limitations are discussed.

75 FR 6123 - Federal Motor Vehicle Safety Standards; Occupant Crash Protection

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-08

... motor vehicle safety standard is in effect under this chapter, a State or a political subdivision of a... [Docket No. NHTSA-2009-0156] RIN 2127-AK57 Federal Motor Vehicle Safety Standards; Occupant Crash...'s response to petitions for reconsideration of a November 12, 2008 final rule that amended the child...

48 CFR 22.403-3 - Contract Work Hours and Safety Standards Act.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Contract Work Hours and... Standards for Contracts Involving Construction 22.403-3 Contract Work Hours and Safety Standards Act. The Contract Work Hours and Safety Standards Act (40 U.S.C. 3701 et seq.) requires that certain contracts (see...

A Safety Program that Integrated Behavior-Based Safety and Traditional Safety Methods and Its Effects on Injury Rates of Manufacturing Workers

ERIC Educational Resources Information Center

Hermann, Jaime A.; Ibarra, Guillermo V.; Hopkins, B. L.

2010-01-01

The present research examines the effects of a complex safety program that combined Behavior-Based Safety (BBS) and traditional safety methods. The study was conducted in an automobile parts plant in Mexico. Two sister plants served as comparison. Some of the components of the safety programs addressed behaviors of managers and included methods…

Directory of Academic Programs in Occupational Safety and Health.

ERIC Educational Resources Information Center

Weis, William J., III; And Others

This booklet describes academic program offerings in American colleges and universities in the area of occupational safety and health. Programs are divided into five major categories, corresponding to each of the core disciplines: (1) occupational safety and health/industrial hygiene, (2) occupational safety, (3) industrial hygiene, (4)…

Industrial Education. Vocational Education Program Courses Standards.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Vocational, Adult, and Community Education.

This document contains vocational education program courses standards (curriculum frameworks and student performance standards) for exploratory courses, practical arts courses, and job preparatory programs offered at the secondary or postsecondary level in Florida. Each program courses standard is composed of two parts: a curriculum framework and…

Labor Standards and Safety Division, Alaska Department of Labor

Science.gov Websites

Deborah Kelly, Director The mission of Labor Standards and Safety is to ensure safe and legal working of state and federal standards, and by training employers and employees to follow safe and healthful

Developing an educational safety program for pharmacy employees.

PubMed

Hayman, J N

1980-02-01

The need for developing educational safety programs for pharmacy employees is discussed. A three-part program is offered as a guide for structuring a departmental safety program. Part I deals with environmental hazards such as wet floors, poor lighting, and cluttered walk areas. Precautions that should be taken to avoid accidental exposure to patients with communicable diseases are also included. Hazards that may result from improper handling of materials or equipment are addressed in Part II. Included are precautions for handling chemicals, needles, ladders, and electrical equipment. Proper methods of lifting heavy objects are also discussed. Part III details plans to protect staff members in the event of a fire. Plans for reporting fires and evacuating the pharmacy and hospital are discussed. The outlined program requires self-study by staff members during initial employee orientation, followed by annual retraining. Employees are tested and graded on safety topics, and training records are filed for future reference. The program outlined is thought to offer a simple yet effective means of acquainting staff members with established institutional and departmental safety procedures.

Railroad safety program Federal Railroad Administration OIG audit report

DOT National Transportation Integrated Search

1996-12-19

FRA's inspection and enforcement of Federal railroad safety standards were not effective and did not ensure railroads complied with safety standards. The Office of the Inspector General (OIG) found FRA inspectors did not cover areas necessary to ensu...

Administrative goals and safety standards for hazard control on forested recreation sites

Treesearch

Lee A. Paine

1973-01-01

For efficient control of tree hazard on recreation sites, a specific administrative goal must be selected. A safety standard designed to achieve the selected goal and a uniform hazard-rating procedure will then promote a consistent level of safety at an acceptable cost. Safety standards can be established with the aid of data for past years, and dollar evaluations are...

NASA safety program activities in support of the Space Exploration Initiatives Nuclear Propulsion program

NASA Technical Reports Server (NTRS)

Sawyer, J. C., Jr.

1993-01-01

The activities of the joint NASA/DOE/DOD Nuclear Propulsion Program Technical Panels have been used as the basis for the current development of safety policies and requirements for the Space Exploration Initiatives (SEI) Nuclear Propulsion Technology development program. The Safety Division of the NASA Office of Safety and Mission Quality has initiated efforts to develop policies for the safe use of nuclear propulsion in space through involvement in the joint agency Nuclear Safety Policy Working Group (NSPWG), encouraged expansion of the initial policy development into proposed programmatic requirements, and suggested further expansion into the overall risk assessment and risk management process for the NASA Exploration Program. Similar efforts are underway within the Department of Energy to ensure the safe development and testing of nuclear propulsion systems on Earth. This paper describes the NASA safety policy related to requirements for the design of systems that may operate where Earth re-entry is a possibility. The expected plan of action is to support and oversee activities related to the technology development of nuclear propulsion in space, and support the overall safety and risk management program being developed for the NASA Exploration Program.

Voluntary Product Standard PS 72-76: Toy Safety.

ERIC Educational Resources Information Center

National Bureau of Standards (DOC), Washington, DC.

The purpose of this voluntary product standard is to establish nationally recognized safety requirements and test methods for toys intended for use by children in age groups through 14 years. The standard relates to possible hazards that may not be readily recognized and which may be encountered in,normal use or after reasonably foreseeable abuse.…

Planning the Unplanned Experiment: Assessing the Efficacy of Standards for Safety Critical Software

NASA Technical Reports Server (NTRS)

Graydon, Patrick J.; Holloway, C. Michael

2015-01-01

We need well-founded means of determining whether software is t for use in safety-critical applications. While software in industries such as aviation has an excellent safety record, the fact that software aws have contributed to deaths illustrates the need for justi ably high con dence in software. It is often argued that software is t for safety-critical use because it conforms to a standard for software in safety-critical systems. But little is known about whether such standards `work.' Reliance upon a standard without knowing whether it works is an experiment; without collecting data to assess the standard, this experiment is unplanned. This paper reports on a workshop intended to explore how standards could practicably be assessed. Planning the Unplanned Experiment: Assessing the Ecacy of Standards for Safety Critical Software (AESSCS) was held on 13 May 2014 in conjunction with the European Dependable Computing Conference (EDCC). We summarize and elaborate on the workshop's discussion of the topic, including both the presented positions and the dialogue that ensued.

Medicare and Medicaid Programs; Fire Safety Requirements for Certain Health Care Facilities. Final rule.

PubMed

2016-05-04

This final rule will amend the fire safety standards for Medicare and Medicaid participating hospitals, critical access hospitals (CAHs), long-term care facilities, intermediate care facilities for individuals with intellectual disabilities (ICF-IID), ambulatory surgery centers (ASCs), hospices which provide inpatient services, religious non-medical health care institutions (RNHCIs), and programs of all-inclusive care for the elderly (PACE) facilities. Further, this final rule will adopt the 2012 edition of the Life Safety Code (LSC) and eliminate references in our regulations to all earlier editions of the Life Safety Code. It will also adopt the 2012 edition of the Health Care Facilities Code, with some exceptions.

Highway Safety Program Manual: Volume 15: Police Traffic Services.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 15 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) focuses on police traffic services. The purpose and objectives of a police services program are described. Federal authority in the areas of highway safety and policies regarding a police traffic…

29 CFR 500.102 - Applicability of vehicle safety standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 3 2011-07-01 2011-07-01 false Applicability of vehicle safety standards. 500.102 Section 500.102 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR REGULATIONS MIGRANT AND SEASONAL AGRICULTURAL WORKER PROTECTION Motor Vehicle Safety and Insurance for Transportation of Migrant and Seasonal...

Fundamental Use of Surgical Energy (FUSE): An Essential Educational Program for Operating Room Safety

PubMed Central

Jones, Stephanie B; Munro, Malcolm G; Feldman, Liane S; Robinson, Thomas N; Brunt, L Michael; Schwaitzberg, Steven D; Jones, Daniel B; Fuchshuber, Pascal R

2017-01-01

Operating room (OR) safety has become a major concern in patient safety since the 1990s. Improvement of team communication and behavior is a popular target for safety programming at the institutional level. Despite these efforts, essential safety gaps remain in the OR and procedure rooms. A prime example is the use of energy-based devices in ORs and procedural areas. The lack of fundamental understanding of energy device function, design, and application contributes to avoidable injury and harm at a rate of approximately 1 to 2 per 1000 patients in the US. Hundreds of OR fires occur each year in the US, some causing severe injury and even death. Most of these fires are associated with the use of energy-based surgical devices. In response to this safety issue, the Society of American Gastrointestinal and Endoscopic Surgeons (SAGES) developed the Fundamental Use of Surgical Energy (FUSE) program. This program includes a standardized curriculum targeted to surgeons, other physicians, and allied health care professionals and a psychometrically designed and validated certification test. A successful FUSE certification documents acquisition of the basic knowledge needed to safely use energy-based devices in the OR. By design FUSE fills a void in the curriculum and competency assessment for surgeons and other procedural specialists in the use of energy-based devices in patients. PMID:28241913

Highway Safety Program Manual: Volume 6: Codes and Laws.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 6 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred safety practices) concentrates on codes and laws. The purpose and specific objectives of the Codes and Laws Program, Federal authority in the area of highway safety, and policies regarding traffic regulation are described.…

49 CFR Appendix C to Part 238 - Suspension System Safety Performance Standards

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Suspension System Safety Performance Standards C Appendix C to Part 238 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PASSENGER EQUIPMENT SAFETY STANDARDS Pt. 238, App. C...

Maternal Quality Standards for Children's Television Programs.

ERIC Educational Resources Information Center

Nikken, Peter; And Others

1996-01-01

Investigates the standards mothers use to evaluate four types of children's television programs: (1) cartoons; (2) news programs for children; (3) educational children's programs; and (4) dramatic children's programs. Three quality standards considered most important were comprehensibility, aesthetic quality, and elicitation of involvement.…

76 FR 29333 - Pipeline Safety: Meetings of the Technical Pipeline Safety Standards Committee and the Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-20

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No... Technical Hazardous Liquid Pipeline Safety Standards Committee AGENCY: Pipeline and Hazardous Materials... for natural gas pipelines and for hazardous liquid pipelines. Both committees were established under...

Overview of Energy Systems' safety analysis report programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-03-01

The primary purpose of an Safety Analysis Report (SAR) is to provide a basis for judging the adequacy of a facility's safety. The SAR documents the safety analyses that systematically identify the hazards posed by the facility, analyze the consequences and risk of potential accidents, and describe hazard control measures that protect the health and safety of the public and employees. In addition, some SARs document, as Technical Safety Requirements (TSRs, which include Technical Specifications and Operational Safety Requirements), technical and administrative requirements that ensure the facility is operated within prescribed safety limits. SARs also provide conveniently summarized information thatmore » may be used to support procedure development, training, inspections, and other activities necessary to facility operation. This Overview of Energy Systems Safety Analysis Report Programs'' Provides an introduction to the programs and processes used in the development and maintenance of the SARs. It also summarizes some of the uses of the SARs within Energy Systems and DOE.« less

75 FR 22303 - Safety Standard for Bassinets and Cradles: Notice of Proposed Rulemaking

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-28

... an infant's development. Once an infant can push up by him/herself, a number of hazards are created... ``Commission'') to promulgate consumer product safety standards for durable infant or toddler products. These... product safety standards for durable infant or toddler products. These standards are to be ``substantially...

Program evaluation of FHWA pedestrian and bicycle safety activities.

DOT National Transportation Integrated Search

2011-03-01

"Introduction : FHWAs Office of Highway Safety (HSA) initiated a program evaluation by Booz Allen Hamilton to assess the overall effectiveness of the Agencys Pedestrian and Bicycle Safety Program. The evaluation covers pedestrian and bicycle sa...

Highway Safety Program Manual: Volume 11: Emergency Medical Services.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 11 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on emergency medical services. The purpose of the program, Federal authority in the area of medical services, and policies related to an emergency medical services (EMS) program are…

NASA safety standard for lifting devices and equipment

NASA Astrophysics Data System (ADS)

1990-09-01

NASA's minimum safety requirements are established for the design, testing, inspection, maintenance, certification, and use of overhead and gantry cranes (including top running monorail, underhung, and jib cranes), mobile cranes, derrick hoists, and special hoist supported personnel lifting devices (these do not include elevators, ground supported personnel lifts, or powered platforms). Minimum requirements are also addressed for the testing, inspection, and use of Hydra-sets, hooks, and slings. Safety standards are thoroughly detailed.

NASA safety standard for lifting devices and equipment

NASA Technical Reports Server (NTRS)

1990-01-01

NASA's minimum safety requirements are established for the design, testing, inspection, maintenance, certification, and use of overhead and gantry cranes (including top running monorail, underhung, and jib cranes), mobile cranes, derrick hoists, and special hoist supported personnel lifting devices (these do not include elevators, ground supported personnel lifts, or powered platforms). Minimum requirements are also addressed for the testing, inspection, and use of Hydra-sets, hooks, and slings. Safety standards are thoroughly detailed.

Patient Safety: Moving the Bar in Prison Health Care Standards

PubMed Central

Greifinger, Robert B.; Mellow, Jeff

2010-01-01

Improvements in community health care quality through error reduction have been slow to transfer to correctional settings. We convened a panel of correctional experts, which recommended 60 patient safety standards focusing on such issues as creating safety cultures at organizational, supervisory, and staff levels through changes to policy and training and by ensuring staff competency, reducing medication errors, encouraging the seamless transfer of information between and within practice settings, and developing mechanisms to detect errors or near misses and to shift the emphasis from blaming staff to fixing systems. To our knowledge, this is the first published set of standards focusing on patient safety in prisons, adapted from the emerging literature on quality improvement in the community. PMID:20864714

The NASA Aviation Safety Program: Overview

NASA Technical Reports Server (NTRS)

Shin, Jaiwon

2000-01-01

In 1997, the United States set a national goal to reduce the fatal accident rate for aviation by 80% within ten years based on the recommendations by the Presidential Commission on Aviation Safety and Security. Achieving this goal will require the combined efforts of government, industry, and academia in the areas of technology research and development, implementation, and operations. To respond to the national goal, the National Aeronautics and Space Administration (NASA) has developed a program that will focus resources over a five year period on performing research and developing technologies that will enable improvements in many areas of aviation safety. The NASA Aviation Safety Program (AvSP) is organized into six research areas: Aviation System Modeling and Monitoring, System Wide Accident Prevention, Single Aircraft Accident Prevention, Weather Accident Prevention, Accident Mitigation, and Synthetic Vision. Specific project areas include Turbulence Detection and Mitigation, Aviation Weather Information, Weather Information Communications, Propulsion Systems Health Management, Control Upset Management, Human Error Modeling, Maintenance Human Factors, Fire Prevention, and Synthetic Vision Systems for Commercial, Business, and General Aviation aircraft. Research will be performed at all four NASA aeronautics centers and will be closely coordinated with Federal Aviation Administration (FAA) and other government agencies, industry, academia, as well as the aviation user community. This paper provides an overview of the NASA Aviation Safety Program goals, structure, and integration with the rest of the aviation community.

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2010 CFR

2010-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2011 CFR

2011-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2012 CFR

2012-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2014 CFR

2014-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2013 CFR

2013-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

DEVELOPMENT OF A SAFETY COMMUNICATION AND RECOGNITION PROGRAM FOR CONSTRUCTION

PubMed Central

SPARER, EMILY H.; HERRICK, ROBERT F.; DENNERLEIN, JACK T.

2017-01-01

Leading-indicator–based (e.g., hazard recognition) incentive programs provide an alternative to controversial lagging-indicator–based (e.g., injury rates) programs. We designed a leading-indicator–based safety communication and recognition program that incentivized safe working conditions. The program was piloted for two months on a commercial construction worksite, and then redesigned using qualitative interview and focus group data from management and workers. We then ran the redesigned program for six months on the same worksite. Foremen received detailed weekly feedback from safety inspections, and posters displayed worksite and subcontractor safety scores. In the final program design, the whole site, not individual subcontractors, was the unit of analysis and recognition. This received high levels of acceptance from workers, who noted increased levels of site unity and team-building. This pilot program showed that construction workers value solidarity with others on site, demonstrating the importance of health and safety programs that engage all workers through a reliable and consistent communication infrastructure. PMID:25815741

Health Occupations Education. Vocational Education Program Courses Standards.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Vocational, Adult, and Community Education.

This document contains vocational education program course standards for health occupations programs in Florida. Standards are provided for a total of 71 exploratory courses, practical arts courses, and job preparatory programs offered at the secondary or postsecondary level. Each program courses standard consists of a curriculum framework and…

NASA ELV Payload Safety Program Information Exchange

NASA Technical Reports Server (NTRS)

Staubus, Cal; Palo, Tom; Dook, Mike; Donovan, Shawn

2007-01-01

This presentation details the Expendable Launch Vehicle (ELV) Payload Safety Program in its development and plan for implementation. It is an overview of the program's policies, process and requirements.

The National Shipbuilding Research Program: Employee Involvement/Safety

DTIC Science & Technology

1990-06-01

THE NATIONAL SHIPBUILDING RESEARCH PROGRAM Employee InvoIvement/Safety U.S. DEPARTMENT OF TRANSPORTATION Maritime Administration and U.S. NAVY in...to and sought assistance either directly or through the Program Manager or the MTC Safety Chair- man from individual members who had functional respon...carpenters in the Model Shop. The training the2. 3. 4. 5. program to be developed and taught by the SP-5 Team. (The employees in the Model Shop were selected

Background report guidance for roadway safety data to support the highway safety improvement program.

DOT National Transportation Integrated Search

2011-06-01

"Quality data are the foundation for making important decisions regarding the design, operation, and safety of : roadways. The Highway Safety Improvement Program (HSIP) provides information on how safety data should be : used. However, there are no d...

Michigan safety belt use immediately following implementation of standard enforcement

DOT National Transportation Integrated Search

2000-05-01

Reported here are the results of a direct observation survey of safety belt use conducted in March 2000 to determine the effect the implementation of standard enforcement legislation has had on Michigan's safety belt use rate. In this study, 11,687 o...

78 FR 52848 - Occupational Safety and Health Standards for Aircraft Cabin Crewmembers

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-27

... [Docket No.: FAA-2012-0953] Occupational Safety and Health Standards for Aircraft Cabin Crewmembers AGENCY... regulation of some occupational safety and health conditions affecting cabin crewmembers on aircraft by the Occupational Safety and Health Administration. This policy statement will enhance occupational safety and...

Development and evaluation of Virginia's highway safety corridor program.

DOT National Transportation Integrated Search

2006-01-01

On July 1, 2003, legislation went into effect that established a highway safety corridor (HSC) program for Virginia. The intent of the HSC program is to address safety concerns through a combination of law enforcement, education, and engineering coun...

29 CFR 500.103 - Activities not subject to vehicle safety standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 3 2011-07-01 2011-07-01 false Activities not subject to vehicle safety standards. 500.103... LABOR REGULATIONS MIGRANT AND SEASONAL AGRICULTURAL WORKER PROTECTION Motor Vehicle Safety and Insurance for Transportation of Migrant and Seasonal Agricultural Workers, Housing Safety and Health for Migrant...

29 CFR 500.103 - Activities not subject to vehicle safety standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Activities not subject to vehicle safety standards. 500.103... LABOR REGULATIONS MIGRANT AND SEASONAL AGRICULTURAL WORKER PROTECTION Motor Vehicle Safety and Insurance for Transportation of Migrant and Seasonal Agricultural Workers, Housing Safety and Health for Migrant...

49 CFR 214.303 - Railroad on-track safety programs, generally.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Railroad on-track safety programs, generally. 214... RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD WORKPLACE SAFETY Roadway Worker Protection § 214.303 Railroad on-track safety programs, generally. (a) Each railroad to which this part applies...

NPRM: Head Start Program Performance Standards.

ERIC Educational Resources Information Center

Administration for Children, Youth, and Families (DHHS), Washington, DC. Head Start Bureau.

This document contains the Notice of Proposed Rulemaking (NPRM) on Head Start Program Performance Standards, appearing in the April 22, 1996 "Federal Register." The Administration for Children, Youth, and Families issued this notice to implement the statutory provisions for establishing program performance standards for early Head Start…

Common Standards for Career Education Programs

ERIC Educational Resources Information Center

Missouri Department of Elementary and Secondary Education, 2012

2012-01-01

The Office of College and Career Readiness has developed the "Common Standards for Career Education Programs." The six common standards are: (1) Program Management and Planning; (2) Curriculum; (3) Instruction; (4) Professional Development; (5) Career and Technical Student Organizations; and (6) Instructional Facilities and Equipment.…

76 FR 52231 - Restrictions on Operators Employing Former Flight Standards Service Aviation Safety Inspectors

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-22

... Standards Service Aviation Safety Inspectors AGENCY: Federal Aviation Administration (FAA), DOT. ACTION... responsible for the oversight of, a Flight Standards Service Aviation Safety Inspector, and had direct... . SUPPLEMENTARY INFORMATION: Authority for This Rulemaking The FAA's authority to issue rules on aviation safety...

Marketing Education. Vocational Education Program Courses Standards.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Vocational, Adult, and Community Education.

This document contains vocational education program courses standards (curriculum frameworks and student performance standards) for exploratory courses, practical arts courses, and job preparatory programs in marketing offered at the secondary or postsecondary level as a part of Florida's comprehensive vocational education program. Each standard…

Marketing Education. Vocational Education Program Courses Standards.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Vocational, Adult, and Community Education.

This document contains vocational education program courses standards (curriculum frameworks and student performance standards) for exploratory courses, practical arts courses, and job preparatory programs in marketing education offered at the secondary or postsecondary level as a part of Florida's comprehensive vocational education program.…

Technology Education. Vocational Education Program Courses Standards.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Vocational, Adult, and Community Education.

This document contains vocational education program courses standards (curriculum frameworks and student performance standards) for exploratory courses, practical arts courses, and job preparatory programs in technology education offered at the secondary or postsecondary level as a part of Florida's comprehensive vocational education program.…

Safety in the Chemical Laboratory: Safety in the Chemistry Laboratories: A Specific Program.

ERIC Educational Resources Information Center

Corkern, Walter H.; Munchausen, Linda L.

1983-01-01

Describes a safety program adopted by Southeastern Louisiana University. Students are given detailed instructions on laboratory safety during the first laboratory period and a test which must be completely correct before they are allowed to return to the laboratory. Test questions, list of safety rules, and a laboratory accident report form are…

78 FR 18965 - Submission for OMB Review; Comment Request: Safety Standard for Cigarette Lighters

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-28

... Request: Safety Standard for Cigarette Lighters AGENCY: Consumer Product Safety Commission. ACTION: Notice... Commission's safety standard for cigarette lighters, 16 CFR part 1210. DATES: Written comments on this... Cigarette Lighters, 16 CFR part 1210. One comment was received in response to that notice. The commenter...

Analysis of School Food Safety Programs Based on HACCP Principles

ERIC Educational Resources Information Center

Roberts, Kevin R.; Sauer, Kevin; Sneed, Jeannie; Kwon, Junehee; Olds, David; Cole, Kerri; Shanklin, Carol

2014-01-01

Purpose/Objectives: The purpose of this study was to determine how school districts have implemented food safety programs based on HACCP principles. Specific objectives included: (1) Evaluate how schools are implementing components of food safety programs; and (2) Determine foodservice employees food-handling practices related to food safety.…

F14A System Safety Program Plan

DTIC Science & Technology

1981-09-03

by block number) Electromagnetic Pulse (EMP) Safety Plans Test Program EMP Testing F14 Aircraft Plans 20 ABSTRACT (Continue on reverse side if...compromising completion of the required experimental tasks. This document addresses the safety aspect of performing an Electromagnetic Pulse (EMP) test

Development of a safety communication and recognition program for construction.

PubMed

Sparer, Emily H; Herrick, Robert F; Dennerlein, Jack T

2015-05-01

Leading-indicator-based (e.g., hazard recognition) incentive programs provide an alternative to controversial lagging-indicator-based (e.g., injury rates) programs. We designed a leading-indicator-based safety communication and recognition program that incentivized safe working conditions. The program was piloted for two months on a commercial construction worksite and then redesigned using qualitative interview and focus group data from management and workers. We then ran the redesigned program for six months on the same worksite. Foremen received detailed weekly feedback from safety inspections, and posters displayed worksite and subcontractor safety scores. In the final program design, the whole site, not individual subcontractors, was the unit of analysis and recognition. This received high levels of acceptance from workers, who noted increased levels of site unity and team-building. This pilot program showed that construction workers value solidarity with others on site, demonstrating the importance of health and safety programs that engage all workers through a reliable and consistent communication infrastructure. © The Author(s) 2015 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

14 CFR 151.99 - Modifications of programming standards.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Modifications of programming standards. 151... (CONTINUED) AIRPORTS FEDERAL AID TO AIRPORTS Project Programming Standards § 151.99 Modifications of programming standards. The Director, Airports, Service, or the Regional Director concerned may, on individual...

14 CFR 151.99 - Modifications of programming standards.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Modifications of programming standards. 151... (CONTINUED) AIRPORTS FEDERAL AID TO AIRPORTS Project Programming Standards § 151.99 Modifications of programming standards. The Director, Airports, Service, or the Regional Director concerned may, on individual...

14 CFR 151.99 - Modifications of programming standards.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Modifications of programming standards. 151... (CONTINUED) AIRPORTS FEDERAL AID TO AIRPORTS Project Programming Standards § 151.99 Modifications of programming standards. The Director, Airports, Service, or the Regional Director concerned may, on individual...

14 CFR 151.99 - Modifications of programming standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Modifications of programming standards. 151... (CONTINUED) AIRPORTS FEDERAL AID TO AIRPORTS Project Programming Standards § 151.99 Modifications of programming standards. The Director, Airports, Service, or the Regional Director concerned may, on individual...

14 CFR 151.99 - Modifications of programming standards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Modifications of programming standards. 151... (CONTINUED) AIRPORTS FEDERAL AID TO AIRPORTS Project Programming Standards § 151.99 Modifications of programming standards. The Director, Airports, Service, or the Regional Director concerned may, on individual...

78 FR 54510 - New Entrant Safety Assurance Program Operational Test

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-04

...-0298] New Entrant Safety Assurance Program Operational Test AGENCY: Federal Motor Carrier Safety...) announces an operational test of procedural changes to the New Entrant Safety Assurance Program. The operational test began in July 2013 and will be in effect for up to 12 months. It is applicable to new entrant...

Physical training programs for public safety personnel.

PubMed

Moulson-Litchfield, M; Freedson, P S

1986-07-01

The nature of public safety jobs often reflects sudden strenuous exertion at a moment's notice. In the 1970s, police and fire departments became acutely aware of high numbers of on-the-job injuries and illnesses related to coronary heart disease. Disability payments for premature cardiovascular problems were being linked to cardiovascular risk factors accrued while on the job. This prompted public safety departments to initiate fitness programs for their employees. The fitness level of public safety personnel is not high. Job-related benefits have been linked to consistent physical training; high aerobic capacity, high muscular strength and endurance, above-average lean body weight, and minimal body fat are necessary for efficient job performance. In light of the physical benefits gained through regular exercise, pioneer departments began exercise programs for their personnel. These included the fire departments in Lawrence, Kansas, Alexandria, Virginia and Los Angeles, and the Dallas police department. Mealey documents psychologic improvements with exercise. Pioneer fitness programs such as that of the Los Angeles fire department have noted evidence of risk-factor reduction following institution of a mandatory program. The Alexandria department has instituted mandatory entrance requirements for their recruits, such as a no-smoking policy while on the job and mandatory exercise participation. Many community departments are not able to justify the institution of fitness programs. They may cite cost, lack of space, or lack of administrative support for the inability to initiate these programs. Legal and union ramifications may also deter the effort of program implementation. Considerations when implementing programs should involve cost of equipment, space, employee input, and determination of mandatory versus voluntary status. Preliminary medical screening and fitness evaluations should reliably evaluate an employee's physical ability to perform job-related tasks

Study Abroad Programs: Making Safety a Priority

ERIC Educational Resources Information Center

Buddan, Michael Craig; Budden, Connie B.; Juban, Rusty; Baraya, Aristides

2014-01-01

Increasingly, students are participating in study abroad programs. Such programs provide participants a variety of learning experiences. Developing cross-cultural appreciation, communication skills, maturity and a less ethno-centric mindset are among the impacts study abroad programs offer. However, care must be taken to assure student safety and…

Health Occupations Education. Vocational Education Program Courses Standards.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Vocational, Adult, and Community Education.

This document contains vocational education program courses standards for exploratory courses, practical arts courses, and job preparatory programs offered at the secondary or postsecondary level. Each program standard is composed of two parts: a curriculum framework and student performance standards. The curriculum framework includes four major…

Advancing perinatal patient safety through application of safety science principles using health IT.

PubMed

Webb, Jennifer; Sorensen, Asta; Sommerness, Samantha; Lasater, Beth; Mistry, Kamila; Kahwati, Leila

2017-12-19

The use of health information technology (IT) has been shown to promote patient safety in Labor and Delivery (L&D) units. The use of health IT to apply safety science principles (e.g., standardization) to L&D unit processes may further advance perinatal safety. Semi-structured interviews were conducted with L&D units participating in the Agency for Healthcare Research and Quality's (AHRQ's) Safety Program for Perinatal Care (SPPC) to assess units' experience with program implementation. Analysis of interview transcripts was used to characterize the process and experience of using health IT for applying safety science principles to L&D unit processes. Forty-six L&D units from 10 states completed participation in SPPC program implementation; thirty-two (70%) reported the use of health IT as an enabling strategy for their local implementation. Health IT was used to improve standardization of processes, use of independent checks, and to facilitate learning from defects. L&D units standardized care processes through use of electronic health record (EHR)-based order sets and use of smart pumps and other technology to improve medication safety. Units also standardized EHR documentation, particularly related to electronic fetal monitoring (EFM) and shoulder dystocia. Cognitive aids and tools were integrated into EHR and care workflows to create independent checks such as checklists, risk assessments, and communication handoff tools. Units also used data from EHRs to monitor processes of care to learn from defects. Units experienced several challenges incorporating health IT, including obtaining organization approval, working with their busy IT departments, and retrieving standardized data from health IT systems. Use of health IT played an integral part in the planning and implementation of SPPC for participating L&D units. Use of health IT is an encouraging approach for incorporating safety science principles into care to improve perinatal safety and should be incorporated

Implementation of a patient safety program at a tertiary health system: A longitudinal analysis of interventions and serious safety events.

PubMed

Cropper, Douglas P; Harb, Nidal H; Said, Patricia A; Lemke, Jon H; Shammas, Nicolas W

2018-04-01

We hypothesize that implementation of a safety program based on high reliability organization principles will reduce serious safety events (SSE). The safety program focused on 7 essential elements: (a) safety rounding, (b) safety oversight teams, (c) safety huddles, (d) safety coaches, (e) good catches/safety heroes, (f) safety education, and (g) red rule. An educational curriculum was implemented focusing on changing high-risk behaviors and implementing critical safety policies. All unusual occurrences were captured in the Midas system and investigated by risk specialists, the safety officer, and the chief medical officer. A multidepartmental committee evaluated these events, and a root cause analysis (RCA) was performed. Events were tabulated and serious safety event (SSE) recorded and plotted over time. Safety success stories (SSSs) were also evaluated over time. A steady drop in SSEs was seen over 9 years. Also a rise in SSSs was evident, reflecting on staff engagement in the program. The parallel change in SSEs, SSSs, and the implementation of various safety interventions highly suggest that the program was successful in achieving its goals. A safety program based on high-reliability organization principles and made a core value of the institution can have a significant positive impact on reducing SSEs. © 2018 American Society for Healthcare Risk Management of the American Hospital Association.

Safety in Riding Programs: A Director's Guide.

ERIC Educational Resources Information Center

Kpachavi, Teresa

1996-01-01

Camp riding programs should be examined regularly for liability and risk management issues. Elements of a basic safety assessment include requiring proper safety apparel, removing obstructions from riding rings, ensuring doors and gates are closed, requiring use of lead ropes, securing equine medications, banning smoking, posting written…

Engineering and Safety Partnership Enhances Safety of the Space Shuttle Program (SSP)

NASA Technical Reports Server (NTRS)

Duarte, Alberto

2007-01-01

Project Management must use the risk assessment documents (RADs) as tools to support their decision making process. Therefore, these documents have to be initiated, developed, and evolved parallel to the life of the project. Technical preparation and safety compliance of these documents require a great deal of resources. Updating these documents after-the-fact not only requires substantial increase in resources - Project Cost -, but this task is also not useful and perhaps an unnecessary expense. Hazard Reports (HRs), Failure Modes and Effects Analysis (FMEAs), Critical Item Lists (CILs), Risk Management process are, among others, within this category. A positive action resulting from a strong partnership between interested parties is one way to get these documents and related processes and requirements, released and updated in useful time. The Space Shuttle Program (SSP) at the Marshall Space Flight Center has implemented a process which is having positive results and gaining acceptance within the Agency. A hybrid Panel, with equal interest and responsibilities for the two larger organizations, Safety and Engineering, is the focal point of this process. Called the Marshall Safety and Engineering Review Panel (MSERP), its charter (Space Shuttle Program Directive 110 F, April 15, 2005), and its Operating Control Plan emphasizes the technical and safety responsibilities over the program risk documents: HRs; FMEA/CILs; Engineering Changes; anomalies/problem resolutions and corrective action implementations, and trend analysis. The MSERP has undertaken its responsibilities with objectivity, assertiveness, dedication, has operated with focus, and has shown significant results and promising perspectives. The MSERP has been deeply involved in propulsion systems and integration, real time technical issues and other relevant reviews, since its conception. These activities have transformed the propulsion MSERP in a truly participative and value added panel, making a

Safety analysis report: A comparison of incidents from Safety Years 2006 through 2010, USDA Forest Service, Rocky Mountain Research Station Inventory and Monitoring Program

Treesearch

Devon Donahue

2012-01-01

This paper is an analysis of 5 years of accident data for the USDA Forest Service, Rocky Mountain Research Station (RMRS) Inventory and Monitoring (IM) Program that identifies past trends, allows for standardized self-comparison, and increases our understanding of the true costs of injuries and accidents. Measuring safety is a difficult task. While most agree that...

Opportunities to Apply the 3Rs in Safety Assessment Programs

PubMed Central

Sewell, Fiona; Edwards, Joanna; Prior, Helen; Robinson, Sally

2016-01-01

Abstract Before a potential new medicine can be administered to humans it is essential that its safety is adequately assessed. Safety assessment in animals forms an integral part of this process, from early drug discovery and initial candidate selection to the program of recommended regulatory tests in animals. The 3Rs (replacement, reduction, and refinement of animals in research) are integrated in the current regulatory requirements and expectations and, in the EU, provide a legal and ethical framework for in vivo research to ensure the scientific objectives are met whilst minimizing animal use and maintaining high animal welfare standards. Though the regulations are designed to uncover potential risks, they are intended to be flexible, so that the most appropriate approach can be taken for an individual product. This article outlines current and future opportunities to apply the 3Rs in safety assessment programs for pharmaceuticals, and the potential (scientific, financial, and ethical) benefits to the industry, across the drug discovery and development process. For example, improvements to, or the development of, novel, early screens (e.g., in vitro, in silico, or nonmammalian screens) designed to identify compounds with undesirable characteristics earlier in development have the potential to reduce late-stage attrition by improving the selection of compounds that require regulatory testing in animals. Opportunities also exist within the current regulatory framework to simultaneously reduce and/or refine animal use and improve scientific outcomes through improvements to technical procedures and/or adjustments to study designs. It is important that approaches to safety assessment are continuously reviewed and challenged to ensure they are science-driven and predictive of relevant effects in humans. PMID:28053076

Synthesizing Safety Conditions for Code Certification Using Meta-Level Programming

NASA Technical Reports Server (NTRS)

Eusterbrock, Jutta

2004-01-01

In code certification the code consumer publishes a safety policy and the code producer generates a proof that the produced code is in compliance with the published safety policy. In this paper, a novel viewpoint approach towards an implementational re-use oriented framework for code certification is taken. It adopts ingredients from Necula's approach for proof-carrying code, but in this work safety properties can be analyzed on a higher code level than assembly language instructions. It consists of three parts: (1) The specification language is extended to include generic pre-conditions that shall ensure safety at all states that can be reached during program execution. Actual safety requirements can be expressed by providing domain-specific definitions for the generic predicates which act as interface to the environment. (2) The Floyd-Hoare inductive assertion method is refined to obtain proof rules that allow the derivation of the proof obligations in terms of the generic safety predicates. (3) A meta-interpreter is designed and experimentally implemented that enables automatic synthesis of proof obligations for submitted programs by applying the modified Floyd-Hoare rules. The proof obligations have two separate conjuncts, one for functional correctness and another for the generic safety obligations. Proof of the generic obligations, having provided the actual safety definitions as context, ensures domain-specific safety of program execution in a particular environment and is simpler than full program verification.

[Changing of the patient safety culture in the pilot institutes of the Hungarian accreditation program].

PubMed

Lám, Judit; Merész, Gergő; Bakacsi, Gyula; Belicza, Éva; Surján, Cecília; Takács, Erika

2016-10-01

The accreditation system for health care providers was developed in Hungary aiming to increase safety, efficiency, and efficacy of care and optimise its organisational operation. The aim of this study was to assess changes of organisational culture in pilot institutes of the accreditation program. 7 volunteer pilot institutes using an internationally validated questionnaire were included. The impact study was performed in 2 rounds: the first before the introduction of the accreditation program, and the second a year later, when the standards were already known. Data were analysed using descriptive statistics and logistic regression models. Statistically significant (p<0.05) positive changes were detected in hospitals in three dimensions: organisational learning - continuous improvement, communication openness, teamwork within the unit while in outpatient clinics: overall perceptions of patient safety, and patient safety within the unit. Organisational culture in the observed institutes needs improvement, but positive changes already point to a safer care. Orv. Hetil., 2016, 157(42), 1667-1673.

ASE Program Certification Standards for Automobile Technician Training Programs.

ERIC Educational Resources Information Center

National Automotive Technicians Education Foundation, Herndon, VA.

This document presents and explains the development and application of the National Institute for Automotive Service Excellence (ASE) program certification standards that were developed to improve the quality of secondary- and postsecondary-level automobile technician training by implementing a certification program that certifies programs in…

2016 Updated American Society of Clinical Oncology/Oncology Nursing Society Chemotherapy Administration Safety Standards, Including Standards for Pediatric Oncology.

PubMed

Neuss, Michael N; Gilmore, Terry R; Belderson, Kristin M; Billett, Amy L; Conti-Kalchik, Tara; Harvey, Brittany E; Hendricks, Carolyn; LeFebvre, Kristine B; Mangu, Pamela B; McNiff, Kristen; Olsen, MiKaela; Schulmeister, Lisa; Von Gehr, Ann; Polovich, Martha

2016-12-01

Purpose To update the ASCO/Oncology Nursing Society (ONS) Chemotherapy Administration Safety Standards and to highlight standards for pediatric oncology. Methods The ASCO/ONS Chemotherapy Administration Safety Standards were first published in 2009 and updated in 2011 to include inpatient settings. A subsequent 2013 revision expanded the standards to include the safe administration and management of oral chemotherapy. A joint ASCO/ONS workshop with stakeholder participation, including that of the Association of Pediatric Hematology Oncology Nurses and American Society of Pediatric Hematology/Oncology, was held on May 12, 2015, to review the 2013 standards. An extensive literature search was subsequently conducted, and public comments on the revised draft standards were solicited. Results The updated 2016 standards presented here include clarification and expansion of existing standards to include pediatric oncology and to introduce new standards: most notably, two-person verification of chemotherapy preparation processes, administration of vinca alkaloids via minibags in facilities in which intrathecal medications are administered, and labeling of medications dispensed from the health care setting to be taken by the patient at home. The standards were reordered and renumbered to align with the sequential processes of chemotherapy prescription, preparation, and administration. Several standards were separated into their respective components for clarity and to facilitate measurement of adherence to a standard. Conclusion As oncology practice has changed, so have chemotherapy administration safety standards. Advances in technology, cancer treatment, and education and training have prompted the need for periodic review and revision of the standards. Additional information is available at http://www.asco.org/chemo-standards .

77 FR 71752 - Federal Motor Vehicle Safety Standards; Lamps, Reflective Devices, and Associated Equipment

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-04

... [Docket No. NHTSA-2012-0174] RIN 2127-Al27 Federal Motor Vehicle Safety Standards; Lamps, Reflective... less than 30 feet in overall length, to the Federal motor vehicle safety standard (FMVSS) on lamps... final rule reorganizing the standard on December 4, 2007. DATES: Comments to this proposal must be...

77 FR 76005 - Submission for OMB Review; Comment Request-Safety Standard for Walk-Behind Power Lawn Mowers

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-26

... Request--Safety Standard for Walk-Behind Power Lawn Mowers AGENCY: Consumer Product Safety Commission... with the Commission's safety standard for walk- behind power lawn mowers. DATES: Written comments on... of approval of the collection of information required in the Safety Standard for Walk-Behind Power...

[Determinants in an occupational health and safety program implementation].

PubMed

Chaves, Sonia Cristina Lima; Santana, Vilma Sousa; de Leão, Inez Cristina Martins; de Santana, Jusiene Nogueira; de Almeida Lacerda, Lívia Maria Aragão

2009-03-01

To identify predictors for the degree to which a program that integrates occupational health surveillance with labor safety, and involves occupational health/safety specialists, company management, and employees, is implemented. This ecological study evaluated companies implementing the occupational health and safety program (OHSP) proposed by the state of Bahia's regional department of Serviço Social da Indústria (Social Services for Industry, SESI) during the 2005-2006 cycle. The companies that participated were randomly selected. Data were collected through interviews with key contacts within the companies and from technical reports issued by SESI. Multiple linear regression was used to identify factors related to the company, employee, occupational/safety specialist, and any subdimensions that might promote OHSP implementation. Of the 78 companies selected (3 384 employees), the degree to which OHSP was implemented was "advanced" in 24.4%, "intermediate" in 53.8%, and "initial" in 19.3%. Company-related, employee-related and specialist-related factors were positively associated with OHSP implementation (P < 0.001). The most important factor overall was the program's financial autonomy (beta = 4.40; P < 0.001). Bivariate analysis revealed that the degree of implementation was associated with the employees' level of health/safety knowledge (beta = 1.58; P < 0.05) and training (beta = 0.40; P < 0.001) and with communication between the occupational safety team (beta = 1.89; P < 0.01) and the health team (beta = 0.58; P < 0.05). These findings remained unchanged after adjustment for levels of education among managers and employees, salary/wages, company size, and risk. The time and resources available for employees to dedicate to occupational health and safety, the integration and reinforcement of employee and manager training programs, and improved relationship between occupational health and safety teams may contribute to the success of health and safety

78 FR 39587 - Uniform Procedures for State Highway Safety Grant Programs

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-02

... DEPARTMENT OF TRANSPORTATION National Highway Traffic Safety Administration 23 CFR Parts 1200... 2127-AL29 Uniform Procedures for State Highway Safety Grant Programs AGENCY: National Highway Traffic... governing the implementation of State highway safety grant programs as amended by the Moving Ahead for...

Safety, reliability, maintainability and quality provisions for the Space Shuttle program

NASA Technical Reports Server (NTRS)

1990-01-01

This publication establishes common safety, reliability, maintainability and quality provisions for the Space Shuttle Program. NASA Centers shall use this publication both as the basis for negotiating safety, reliability, maintainability and quality requirements with Shuttle Program contractors and as the guideline for conduct of program safety, reliability, maintainability and quality activities at the Centers. Centers shall assure that applicable provisions of the publication are imposed in lower tier contracts. Centers shall give due regard to other Space Shuttle Program planning in order to provide an integrated total Space Shuttle Program activity. In the implementation of safety, reliability, maintainability and quality activities, consideration shall be given to hardware complexity, supplier experience, state of hardware development, unit cost, and hardware use. The approach and methods for contractor implementation shall be described in the contractors safety, reliability, maintainability and quality plans. This publication incorporates provisions of NASA documents: NHB 1700.1 'NASA Safety Manual, Vol. 1'; NHB 5300.4(IA), 'Reliability Program Provisions for Aeronautical and Space System Contractors'; and NHB 5300.4(1B), 'Quality Program Provisions for Aeronautical and Space System Contractors'. It has been tailored from the above documents based on experience in other programs. It is intended that this publication be reviewed and revised, as appropriate, to reflect new experience and to assure continuing viability.

Systems Analysis of NASA Aviation Safety Program: Final Report

NASA Technical Reports Server (NTRS)

Jones, Sharon M.; Reveley, Mary S.; Withrow, Colleen A.; Evans, Joni K.; Barr, Lawrence; Leone, Karen

2013-01-01

A three-month study (February to April 2010) of the NASA Aviation Safety (AvSafe) program was conducted. This study comprised three components: (1) a statistical analysis of currently available civilian subsonic aircraft data from the National Transportation Safety Board (NTSB), the Federal Aviation Administration (FAA), and the Aviation Safety Information Analysis and Sharing (ASIAS) system to identify any significant or overlooked aviation safety issues; (2) a high-level qualitative identification of future safety risks, with an assessment of the potential impact of the NASA AvSafe research on the National Airspace System (NAS) based on these risks; and (3) a detailed, top-down analysis of the NASA AvSafe program using an established and peer-reviewed systems analysis methodology. The statistical analysis identified the top aviation "tall poles" based on NTSB accident and FAA incident data from 1997 to 2006. A separate examination of medical helicopter accidents in the United States was also conducted. Multiple external sources were used to develop a compilation of ten "tall poles" in future safety issues/risks. The top-down analysis of the AvSafe was conducted by using a modification of the Gibson methodology. Of the 17 challenging safety issues that were identified, 11 were directly addressed by the AvSafe program research portfolio.

29 CFR 1960.80 - Secretary's evaluations of agency occupational safety and health programs.

Code of Federal Regulations, 2013 CFR

2013-07-01

... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs § 1960.80 Secretary's evaluations of agency occupational safety and health... evaluating an agency's occupational safety and health program. To accomplish this, the Secretary shall...

29 CFR 1960.80 - Secretary's evaluations of agency occupational safety and health programs.

Code of Federal Regulations, 2011 CFR

2011-07-01

... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs § 1960.80 Secretary's evaluations of agency occupational safety and health... evaluating an agency's occupational safety and health program. To accomplish this, the Secretary shall...

29 CFR 1960.80 - Secretary's evaluations of agency occupational safety and health programs.

Code of Federal Regulations, 2012 CFR

2012-07-01

... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs § 1960.80 Secretary's evaluations of agency occupational safety and health... evaluating an agency's occupational safety and health program. To accomplish this, the Secretary shall...

29 CFR 1960.80 - Secretary's evaluations of agency occupational safety and health programs.

Code of Federal Regulations, 2014 CFR

2014-07-01

... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs § 1960.80 Secretary's evaluations of agency occupational safety and health... evaluating an agency's occupational safety and health program. To accomplish this, the Secretary shall...

29 CFR 1960.80 - Secretary's evaluations of agency occupational safety and health programs.

Code of Federal Regulations, 2010 CFR

2010-07-01

... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs § 1960.80 Secretary's evaluations of agency occupational safety and health... evaluating an agency's occupational safety and health program. To accomplish this, the Secretary shall...

Evaluation of safety belt education program for employees

DOT National Transportation Integrated Search

1980-06-01

This research was designed to determine the effectiveness of a nine-month safety belt educational program, utilizing various informational materials developed by NHTSA, in increasing safety belt usage among corporate employees. The materials used inc...

76 FR 18073 - Track Safety Standards; Concrete Crossties

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-01

... metrics would be undesirable and restrict certain fastener assembly designs and capabilities to control... Track Safety Standards Working Group IV. FRA's Approach to Concrete Crossties A. Rail Cant B. Automated... and non-compliant track geometry can cause high- concentrated non-uniform dynamic loading, usually...

Evaluating the effectiveness of the Safety Investment Program (SIP) policies for Oregon.

DOT National Transportation Integrated Search

2009-10-01

The Safety Investment Program (SIP) was originally called the Statewide Transportation Improvement Program - : Safety Investment Program (STIP-SIP). The concept of the program was first discussed in October 1997 and the : program was adopted by the O...

76 FR 51058 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-17

... CFR part 48 training plan to the Metal/ Nonmetal Safety and Health District Manager. In addition to... DEPARTMENT OF LABOR Mine Safety and Health Administration Petitions for Modification of Application of Existing Mandatory Safety Standards AGENCY: Mine Safety and Health Administration, Labor...

29 CFR 1960.79 - Self-evaluations of occupational safety and health programs.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 9 2012-07-01 2012-07-01 false Self-evaluations of occupational safety and health programs. 1960.79 Section 1960.79 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs...

29 CFR 1960.79 - Self-evaluations of occupational safety and health programs.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 9 2014-07-01 2014-07-01 false Self-evaluations of occupational safety and health programs. 1960.79 Section 1960.79 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs...

29 CFR 1960.79 - Self-evaluations of occupational safety and health programs.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 9 2013-07-01 2013-07-01 false Self-evaluations of occupational safety and health programs. 1960.79 Section 1960.79 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs...

29 CFR 1960.79 - Self-evaluations of occupational safety and health programs.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 9 2011-07-01 2011-07-01 false Self-evaluations of occupational safety and health programs. 1960.79 Section 1960.79 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs...

29 CFR 1960.79 - Self-evaluations of occupational safety and health programs.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 9 2010-07-01 2010-07-01 false Self-evaluations of occupational safety and health programs. 1960.79 Section 1960.79 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs...

48 CFR 1352.271-82 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2014 CFR

2014-10-01

... occupational safety and health standards for ship repair. 1352.271-82 Section 1352.271-82 Federal Acquisition... of Provisions and Clauses 1352.271-82 Department of Labor occupational safety and health standards... Occupational Safety and Health Standards for Ship Repair (APR 2010) The contractor, in performance of all work...

48 CFR 1352.271-82 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2011 CFR

2011-10-01

... occupational safety and health standards for ship repair. 1352.271-82 Section 1352.271-82 Federal Acquisition... of Provisions and Clauses 1352.271-82 Department of Labor occupational safety and health standards... Occupational Safety and Health Standards for Ship Repair (APR 2010) The contractor, in performance of all work...

48 CFR 1352.271-82 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2013 CFR

2013-10-01

... occupational safety and health standards for ship repair. 1352.271-82 Section 1352.271-82 Federal Acquisition... of Provisions and Clauses 1352.271-82 Department of Labor occupational safety and health standards... Occupational Safety and Health Standards for Ship Repair (APR 2010) The contractor, in performance of all work...

48 CFR 1352.271-82 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2012 CFR

2012-10-01

... occupational safety and health standards for ship repair. 1352.271-82 Section 1352.271-82 Federal Acquisition... of Provisions and Clauses 1352.271-82 Department of Labor occupational safety and health standards... Occupational Safety and Health Standards for Ship Repair (APR 2010) The contractor, in performance of all work...

48 CFR 1352.271-82 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2010 CFR

2010-10-01

... occupational safety and health standards for ship repair. 1352.271-82 Section 1352.271-82 Federal Acquisition... of Provisions and Clauses 1352.271-82 Department of Labor occupational safety and health standards... Occupational Safety and Health Standards for Ship Repair (APR 2010) The contractor, in performance of all work...

ANOPP programming and documentation standards document

NASA Technical Reports Server (NTRS)

1976-01-01

Standards defining the requirements for preparing software for the Aircraft Noise Prediction Program (ANOPP) were given. It is the intent of these standards to provide definition, design, coding, and documentation criteria for the achievement of a unity among ANOPP products. These standards apply to all of ANOPP's standard software system. The standards encompass philosophy as well as techniques and conventions.

76 FR 69764 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-09

... DEPARTMENT OF LABOR Mine Safety and Health Administration Petitions for Modification of Application of Existing Mandatory Safety Standards AGENCY: Mine Safety and Health Administration, Labor. ACTION: Notice. SUMMARY: Section 101(c) of the Federal Mine Safety and Health Act of 1977 and 30 CFR part...

75 FR 27428 - Safety Standards for Steel Erection

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-17

... in National Highway System construction projects to comply with a number of standards, policies, and...://www.fhwa.dot.gov/bridge/lrfd/index.htm .) For projects involving bridge construction (e.g., temporary... of these requirements will enhance the safety of employees operating on or near structural steel...

A system safety model for developmental aircraft programs

NASA Technical Reports Server (NTRS)

Amberboy, E. J.; Stokeld, R. L.

1982-01-01

Basic tenets of safety as applied to developmental aircraft programs are presented. The integration of safety into the project management aspects of planning, organizing, directing and controlling is illustrated by examples. The basis for project management use of safety and the relationship of these management functions to 'real-world' situations is presented. The rationale which led to the safety-related project decision and the lessons learned as they may apply to future projects are presented.

Planning the Unplanned Experiment: Towards Assessing the Efficacy of Standards for Safety-Critical Software

NASA Technical Reports Server (NTRS)

Graydon, Patrick J.; Holloway, C. M.

2015-01-01

Safe use of software in safety-critical applications requires well-founded means of determining whether software is fit for such use. While software in industries such as aviation has a good safety record, little is known about whether standards for software in safety-critical applications 'work' (or even what that means). It is often (implicitly) argued that software is fit for safety-critical use because it conforms to an appropriate standard. Without knowing whether a standard works, such reliance is an experiment; without carefully collecting assessment data, that experiment is unplanned. To help plan the experiment, we organized a workshop to develop practical ideas for assessing software safety standards. In this paper, we relate and elaborate on the workshop discussion, which revealed subtle but important study design considerations and practical barriers to collecting appropriate historical data and recruiting appropriate experimental subjects. We discuss assessing standards as written and as applied, several candidate definitions for what it means for a standard to 'work,' and key assessment strategies and study techniques and the pros and cons of each. Finally, we conclude with thoughts about the kinds of research that will be required and how academia, industry, and regulators might collaborate to overcome the noted barriers.

Marketing Education. Vocational Education Program Courses Standards.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Applied Tech., Adult, and Community Education.

This document contains vocational education program course standards (curriculum frameworks and student performance standards) for exploratory courses, practical arts courses, and job preparatory programs offered at the secondary and postsecondary level as part of the marketing education component of Florida's comprehensive vocational education…

Technology Education. Vocational Education Program Courses Standards.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Applied Tech., Adult, and Community Education.

This document contains vocational education program course standards (curriculum frameworks and student performance standards) for exploratory courses, practical arts courses, and job preparatory programs offered at the secondary and postsecondary level as part of the technology education component of Florida's comprehensive vocational education…

Ensuring quality and safety.

PubMed

Reid, Jerry

2010-01-01

The certification model addresses quality and safety by directly targeting the qualifications of individuals. The practice accreditation model takes a more global approach to quality and safety and addresses the qualifications of individuals and standards for additional components of the quality chain. Although both certification and practice accreditation fundamentally are voluntary, the programs may become mandatory when enforcement mechanisms are linked to the programs via state or federal legislation or via private reimbursement policies, effectively resulting in mandatory standards. The CARE bill takes a certification approach to quality and safety by focusing on the qualifications of the individual. MIPPA takes an accreditation approach by focusing on the practice. MQSA is somewhat of a hybrid in that it takes an accreditation approach, but spells out standards for the individual that the accreditor must follow. If the practice accreditation standards require that all technologists employed in the practice be certified in the modalities performed, then the practice accreditation model and the certification model become functionally equivalent in terms of personnel qualifications. To the extent that practice accreditation models are less prescriptive regarding personnel standards, the certification model results in more stringent standards.

Management of radioactive material safety programs at medical facilities. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Camper, L.W.; Schlueter, J.; Woods, S.

A Task Force, comprising eight US Nuclear Regulatory Commission and two Agreement State program staff members, developed the guidance contained in this report. This report describes a systematic approach for effectively managing radiation safety programs at medical facilities. This is accomplished by defining and emphasizing the roles of an institution`s executive management, radiation safety committee, and radiation safety officer. Various aspects of program management are discussed and guidance is offered on selecting the radiation safety officer, determining adequate resources for the program, using such contractual services as consultants and service companies, conducting audits, and establishing the roles of authorized usersmore » and supervised individuals; NRC`s reporting and notification requirements are discussed, and a general description is given of how NRC`s licensing, inspection and enforcement programs work.« less

Correlation between safety climate and contractor safety assessment programs in construction

PubMed Central

Sparer, EH1; Murphy, LA; Taylor, KM; Dennerlein, Jt

2015-01-01

Background Contractor safety assessment programs (CSAPs) measure safety performance by integrating multiple data sources together; however, the relationship between these measures of safety performance and safety climate within the construction industry is unknown. Methods 401 construction workers employed by 68 companies on 26 sites and 11 safety managers employed by 11 companies completed brief surveys containing a nine-item safety climate scale developed for the construction industry. CSAP scores from ConstructSecure, Inc., an online CSAP database, classified these 68 companies as high or low scorers, with the median score of the sample population as the threshold. Spearman rank correlations evaluated the association between the CSAP score and the safety climate score at the individual level, as well as with various grouping methodologies. In addition, Spearman correlations evaluated the comparison between manager-assessed safety climate and worker-assessed safety climate. Results There were no statistically significant differences between safety climate scores reported by workers in the high and low CSAP groups. There were, at best, weak correlations between workers’ safety climate scores and the company CSAP scores, with marginal statistical significance with two groupings of the data. There were also no significant differences between the manager-assessed safety climate and the worker-assessed safety climate scores. Conclusions A CSAP safety performance score does not appear to capture safety climate, as measured in this study. The nature of safety climate in construction is complex, which may be reflective of the challenges in measuring safety climate within this industry. PMID:24038403

Food Safety Assessment and Programming.

ERIC Educational Resources Information Center

Gilmore, Gary D.; And Others

1994-01-01

A 1990 Wisconsin extension survey (n=1,549) was followed up in 1993 (n=1,135). In 1993, the top three concerns about food safety were food-borne illnesses, government role, and pesticides/chemicals; in 1990, they were pesticides, drugs in food, and manufacturing standards. In both surveys, preferred information sources were radio, television, and…

48 CFR 1371.113 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2013 CFR

2013-10-01

... occupational safety and health standards for ship repair. 1371.113 Section 1371.113 Federal Acquisition... CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.113 Department of Labor occupational safety and health standards for ship repair. Insert clause 1352.271-82, Department of Labor Occupational Safety and Health...

48 CFR 1371.113 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2012 CFR

2012-10-01

... occupational safety and health standards for ship repair. 1371.113 Section 1371.113 Federal Acquisition... CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.113 Department of Labor occupational safety and health standards for ship repair. Insert clause 1352.271-82, Department of Labor Occupational Safety and Health...

48 CFR 1371.113 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2014 CFR

2014-10-01

... occupational safety and health standards for ship repair. 1371.113 Section 1371.113 Federal Acquisition... CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.113 Department of Labor occupational safety and health standards for ship repair. Insert clause 1352.271-82, Department of Labor Occupational Safety and Health...

48 CFR 1371.113 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2011 CFR

2011-10-01

... occupational safety and health standards for ship repair. 1371.113 Section 1371.113 Federal Acquisition... CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.113 Department of Labor occupational safety and health standards for ship repair. Insert clause 1352.271-82, Department of Labor Occupational Safety and Health...

48 CFR 1371.113 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2010 CFR

2010-10-01

... occupational safety and health standards for ship repair. 1371.113 Section 1371.113 Federal Acquisition... CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.113 Department of Labor occupational safety and health standards for ship repair. Insert clause 1352.271-82, Department of Labor Occupational Safety and Health...

Safety and business benefit analysis of NASA's aviation safety program

DOT National Transportation Integrated Search

2004-09-20

NASA Aviation Safety Program elements encompass a wide range of products that require both public and private investment. Therefore, two methods of analysis, one relating to the public and the other to the private industry, must be combined to unders...

30 CFR 7.10 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false MSHA acceptance of equivalent non-MSHA product... General § 7.10 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non...) [Reserved] (d) After MSHA has determined that non-MSHA product safety standards are equivalent and has...

30 CFR 7.10 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false MSHA acceptance of equivalent non-MSHA product... General § 7.10 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non...) [Reserved] (d) After MSHA has determined that non-MSHA product safety standards are equivalent and has...

30 CFR 7.10 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false MSHA acceptance of equivalent non-MSHA product... General § 7.10 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non...) [Reserved] (d) After MSHA has determined that non-MSHA product safety standards are equivalent and has...

30 CFR 7.10 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false MSHA acceptance of equivalent non-MSHA product... General § 7.10 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non...) [Reserved] (d) After MSHA has determined that non-MSHA product safety standards are equivalent and has...

30 CFR 7.10 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false MSHA acceptance of equivalent non-MSHA product... General § 7.10 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non...) [Reserved] (d) After MSHA has determined that non-MSHA product safety standards are equivalent and has...

Introducing standardized “readbacks” to improve patient safety in surgery: a prospective survey in 92 providers at a public safety-net hospital

PubMed Central

2012-01-01

Background Communication breakdowns represent the main root cause of preventable complications which lead to harm to surgical patients. Standardized readbacks have been successfully implemented as a main pillar of professional aviation safety for decades, to ensure a safe closed-loop communication between air traffic control and individual pilots. The present study was designed to determine the perception of staff in perioperative services regarding the role of standardized readbacks for improving patient safety in surgery at a single public safety-net hospital and level 1 trauma center. Methods A 12-item questionnaire was sent to 180 providers in perioperative services at Denver Health Medical Center. The survey was designed to determine the individual participants’ perception of (1) appropriateness of current readback processes; (2) willingness to attend a future training module on this topic; (3) specific scenarios in which readbacks may be effective; and (4) perceived major barriers to the implementation of standardized readbacks. Survey results were compared between departments (surgery versus anesthesia) and between specific staff roles (attending or midlevel provider, resident physician, nursing staff), using non-parametric tests. Results The response rate to the survey was 50.1 % (n = 92). Respondents overwhelmingly recognized the role of readbacks in reducing communication errors and improving patient safety. There was a strong agreement among respondents to support participation in a readbacks training program. There was no difference in the responses between the surgery and anesthesia departments. There was a statistically significant difference in the healthcare providers willingness to attend a short training module on readbacks (p < 0.001). Resident physicians were less likely to endorse the importance of readbacks in reducing communication errors (p = 0.01) and less willing to attend a short training module on readbacks (p < 0

Ad hoc versus standardized admixtures for continuous infusion drugs in neonatal intensive care: cognitive task analysis of safety at the bedside.

PubMed

Brannon, Timothy S

2006-01-01

Continuous infusion intravenous (IV) drugs in neonatal intensive care are usually prepared based on patient weight so that the dose is readable as a simple multiple of the infusion pump rate. New safety guidelines propose that hospitals switch to using standardized admixtures of these drugs to prevent calculation errors during ad hoc preparation. Extended hierarchical task analysis suggests that switching to standardized admixtures may lead to more errors in programming the pump at the bedside.

Assessing the Relative Influence and Efficacy of Public and Private Food Safety Regulation Regimes: Comparing Codex and Global G.A.P. Standards.

PubMed

Halabi, Sam F; Lin, Ching-Fu

An extensive global system of private food regulation is under construction, one that exceeds conventional regulation thought of as being driven by public authorities like FDA and USDA in the U.S. or the Food Standards Agency in the UK. Agrifood and grocer organizations, in concert with some farming groups, have been the primary designers of this new food regulatory regime. These groups have established alliances that compete with national regulators in complex ways. This article analyzes the relationship between public and private sources of food safety regulation by examining standards adopted by the Codex Alimentarius Commission, a food safety organization jointly run by the Food and Agricultural Organization and the World Health Organization and GlobalG.A.P., a farm assurance program created in the late 1990s by supermarket chains and their major suppliers which has now expanded into a global certifying coalition. While Codex standards are adopted, often as written, by national food safety regulators who are principal drivers of the standard setting process, customers for agricultural products in many countries now demand evidence of GlobalG.A.P. certification as a prerequisite for doing business This article tests not only the durability and strength of private sector standard setting in the food safety system, but also the desirability of that system as an alternative to formal, governmental processes embodied, for our purposes, in the standards adopted by Codex. In many cases, official standards and GlobalG.A.P. standards clash in ways that implicate not only food safety but the flow of agricultural products in the global trading system. The article analyzes current weaknesses in both regimes and possibilities for change that will better reconcile the two competing systems.

Industrial Education. Vocational Education Program Courses Standards.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Vocational, Adult, and Community Education.

This document contains industrial education courses standards for 183 exploratory courses, practical arts courses, and job preparatory programs offered at the secondary or postsecondary level in Florida. Each program courses standard is composed of two parts. The first part, the curriculum framework, includes four major sections: major…

HEALTH AND SAFETY ORGANIZING: OCAW’S WORKER-TO-WORKER HEALTH AND SAFETY TRAINING PROGRAM*

PubMed Central

SLATIN, CRAIG

2018-01-01

In 1987, the Oil, Chemical, and Atomic Workers International Union (OCAW) was funded as one of the original eleven awardees of the Superfund Worker Training Program of the National Institute of Environmental Health Sciences. The OCAW, with the Labor Institute, developed a hazardous waste worker and hazardous materials emergency responder health and safety training program that was specific to its members in the represented industries. A social history is developed to explore a union-led, worker health education intervention. The program sought to develop worker-trainers who would conduct the training, using the Small-Group Activity Method, participate in curriculum development, and ultimately use health and safety training as a vehicle for identifying, developing, and mobilizing health and safety activists among the membership. Although the direction for this effort came from progressive leadership, it arose from the political economy of labor/management relations within specific industrial sectors. PMID:17208754

Public Service Education. Vocational Education Program Courses Standards.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Vocational, Adult, and Community Education.

This document contains vocational education program courses standards (curriculum frameworks and student performance standards) for exploratory courses, practical arts courses, and job preparatory programs in public service education offered at the secondary or postsecondary level as a part of Florida's comprehensive vocational education program.…

23 CFR Appendix C to Part 1200 - ASSURANCES FOR TEEN TRAFFIC SAFETY PROGRAM

Code of Federal Regulations, 2013 CFR

2013-04-01

... 23 Highways 1 2013-04-01 2013-04-01 false ASSURANCES FOR TEEN TRAFFIC SAFETY PROGRAM C APPENDIX C... STATE HIGHWAY SAFETY GRANT PROGRAMS Pt. 1200, App. C APPENDIX C TO PART 1200—ASSURANCES FOR TEEN TRAFFIC SAFETY PROGRAM State: Fiscal Year: The State has elected to implement a Teen Traffic Safety Program—a...

23 CFR Appendix C to Part 1200 - Assurances for Teen Traffic Safety Program

Code of Federal Regulations, 2014 CFR

2014-04-01

... 23 Highways 1 2014-04-01 2014-04-01 false Assurances for Teen Traffic Safety Program C Appendix C... STATE HIGHWAY SAFETY GRANT PROGRAMS Pt. 1200, App. C Appendix C to Part 1200—Assurances for Teen Traffic Safety Program State: Fiscal Year: The State has elected to implement a Teen Traffic Safety Program—a...

Highway Safety Program Manual: Volume 12: Highway Design, Construction and Maintenance.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 12 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) focuses on highway design, construction and maintenance. The purpose and specific objectives of such a program are described. Federal authority in the area of highway safety and policies regarding…

10 CFR 851.11 - Development and approval of worker safety and health program.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false Development and approval of worker safety and health program. 851.11 Section 851.11 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Program Requirements § 851.11 Development and approval of worker safety and health program. (a) Preparation and...

Correlation between safety climate and contractor safety assessment programs in construction.

PubMed

Sparer, Emily H; Murphy, Lauren A; Taylor, Kathryn M; Dennerlein, Jack T

2013-12-01

Contractor safety assessment programs (CSAPs) measure safety performance by integrating multiple data sources together; however, the relationship between these measures of safety performance and safety climate within the construction industry is unknown. Four hundred and one construction workers employed by 68 companies on 26 sites and 11 safety managers employed by 11 companies completed brief surveys containing a nine-item safety climate scale developed for the construction industry. CSAP scores from ConstructSecure, Inc., an online CSAP database, classified these 68 companies as high or low scorers, with the median score of the sample population as the threshold. Spearman rank correlations evaluated the association between the CSAP score and the safety climate score at the individual level, as well as with various grouping methodologies. In addition, Spearman correlations evaluated the comparison between manager-assessed safety climate and worker-assessed safety climate. There were no statistically significant differences between safety climate scores reported by workers in the high and low CSAP groups. There were, at best, weak correlations between workers' safety climate scores and the company CSAP scores, with marginal statistical significance with two groupings of the data. There were also no significant differences between the manager-assessed safety climate and the worker-assessed safety climate scores. A CSAP safety performance score does not appear to capture safety climate, as measured in this study. The nature of safety climate in construction is complex, which may be reflective of the challenges in measuring safety climate within this industry. Am. J. Ind. Med. 56:1463-1472, 2013. © 2013 Wiley Periodicals, Inc. © 2013 Wiley Periodicals, Inc.

Manual of Accreditation Standards for Adventure Programs 1995.

ERIC Educational Resources Information Center

Williamson, John E., Comp.; Gass, Michael, Comp.

This manual presents standards for adventure education programs seeking accreditation from the Association for Experiential Education. The manual is set up sequentially, focusing both on objective standards such as technical risk management aspects, and on subjective standards such as teaching approaches used in programs. Chapter titles provide…

Research on the management and endorsement of nuclear safety standards in the United States and its revelation for China

NASA Astrophysics Data System (ADS)

Liu, Ting; Tian, Yu; Yang, Lili; Gao, Siyi; Song, Dahu

2018-01-01

This paper introduces the American standard system, the Nuclear Regulatory Commission (NRC)’s responsibility, NRC nuclear safety regulations and standards system, studies on NRC’s standards management and endorsement mode, analyzes the characteristics of NRC standards endorsement management, and points out its disadvantages. This paper draws revelation from the standard management and endorsement model of NRC and points suggestion to China’s nuclear and radiation safety standards management.The issue of the “Nuclear Safety Law”plays an important role in China’s nuclear and radiation safety supervision. Nuclear and radiation safety regulations and standards are strong grips on the implementation of “Nuclear Safety Law”. This paper refers on the experience of international advanced countriy, will effectively promote the improvement of the endorsed management of China’s nuclear and radiation safety standards.

41 CFR 128-1.8009 - Review of Seismic Safety Program.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Review of Seismic Safety Program. 128-1.8009 Section 128-1.8009 Public Contracts and Property Management Federal Property Management Regulations System (Continued) DEPARTMENT OF JUSTICE 1-INTRODUCTION 1.80-Seismic Safety Program...

WRRSP: Wyoming rural road safety program.

DOT National Transportation Integrated Search

2009-05-01

SAFETEA-LU contains language indicating that State Department of Transportations (DOTs) will be required to address : safety on local and rural roads. The Wyoming Local Technical Assistant Program (LTAP) coordinated an effort in cooperation with the ...

Defense Standardization Program Journal, July/December 2007

DTIC Science & Technology

2007-12-01

during the standard next review cycle, and identified areas where supplemental standards are needed. ENTERPRISE POWER SECURITY AND CONTINUITY Continual...availability of electric power at the enterprise level is essential for busi- ness functions, safety, and the public well-being.Yet many practical...challenges exist related to keeping critical operations, equipment, or facilities powered when the Peieeaeuiyivle ail ad acn teholg tatsnee electric grid is

Highway Safety Program Manual: Volume 16: Debris Hazard Control and Cleanup.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 16 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on debris hazard control and cleanup. The purpose and objectives of such a program are outlined. Federal authority in the area of highway safety and policies regarding a debris control…

DOE standard 3009 - a reasoned, practical approach to integrating criticality safety into SARs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vessard, S.G.

1995-12-31

In the past there have been efforts by the U.S. Department of Energy (DOE) to provide guidance on those elements that should be included in a facility`s safety analysis report (SAR). In particular, there are two DOE Orders (5480.23, {open_quotes}Nuclear Safety Analysis Reports,{close_quotes} and 5480.24, {open_quotes}Nuclear Criticality Safety{close_quotes}), an interpretive guidance document (NE-70, Interpretive Guidance for DOE Order 5480.24, {open_quotes}Nuclear Criticality Safety{close_quotes}), and DOE Standard DOE-STD-3009-94 {open_quotes}Preparation Guide for U.S. Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports.{close_quotes} Of these, the most practical and useful (pertaining to the application of criticality safety) is DOE-STD-3009-94. This paper is a reviewmore » of Chapters 3, 4, and 6 of this standard and how they provide very clear, helpful, and reasoned criticality safety guidance.« less

Transportation Safety Standards for Wheelchair Users: A Review of Voluntary Standards for Improved Safety, Usability, and Independence of Wheelchair-Seated Travelers

ERIC Educational Resources Information Center

Schneider, Lawrence W.; Manary, Miriam A.; Hobson, Douglas A.

2008-01-01

Safe transportation for wheelchair users who do not transfer to the vehicle seat when traveling in motor vehicles requires after-market wheelchair tiedown and occupant restraint systems (WTORS) to secure the wheelchair and provide crashworthy restraint for the wheelchair-seated occupant. In the absence of adequate government safety standards,…

NASA's post-Challenger safety program - Themes and thrusts

NASA Technical Reports Server (NTRS)

Rodney, G. A.

1988-01-01

The range of managerial, technical, and procedural initiatives implemented by NASA's post-Challenger safety program is reviewed. The recommendations made by the Rogers Commission, the NASA post-Challenger review of Shuttle design, the Congressional investigation of the accident, the National Research Council, the Aerospace Safety Advisory Panel, and NASA internal advisory panels and studies are summarized. NASA safety initiatives regarding improved organizational accountability for safety, upgraded analytical techniques and methodologies for risk assessment and management, procedural initiatives in problem reporting and corrective-action tracking, ground processing, maintenance documentation, and improved technologies are discussed. Safety issues relevant to the planned Space Station are examined.

Ad Hoc versus Standardized Admixtures for Continuous Infusion Drugs in Neonatal Intensive Care: Cognitive Task Analysis of Safety at the Bedside

PubMed Central

Brannon, Timothy S.

2006-01-01

Continuous infusion intravenous (IV) drugs in neonatal intensive care are usually prepared based on patient weight so that the dose is readable as a simple multiple of the infusion pump rate. New safety guidelines propose that hospitals switch to using standardized admixtures of these drugs to prevent calculation errors during ad hoc preparation. Extended hierarchical task analysis suggests that switching to standardized admixtures may lead to more errors in programming the pump at the bedside. PMID:17238482

Radiation safety of crew and passengers of air transportation in civil aviation. Provisional standards

NASA Technical Reports Server (NTRS)

Aksenov, A. F.; Burnazyan, A. I.

1985-01-01

The purpose and application of the provisional standards for radiation safety of crew and passengers in civil aviation are given. The radiation effect of cosmic radiation in flight on civil aviation air transport is described. Standard levels of radiation and conditions of radiation safety are discussed.

CHEMISTRY FOR THE SAFETY MAN. SAFETY IN INDUSTRY--ENVIRONMENTAL AND CHEMICAL HAZARDS SERVICES.

ERIC Educational Resources Information Center

CESTRONE, PATRICK F.

THIS BULLETIN, ONE OF A SERIES ON SAFETY IN INDUSTRY, IS INTENDED TO PROVIDE THE BACKGROUND WHICH WILL ENABLE THE SAFETY MAN TO UNDERSTAND SOME OF THE PRINCIPLES APPLIED IN CONTROLLING CHEMICAL HAZARDS. IT WAS PREPARED IN THE OFFICE OF OCCUPATIONAL SAFETY, DIVISION OF PROGRAMING AND RESEARCH, BUREAU OF LABOR STANDARDS. TOPICS INCLUDE (1) WHAT IS…

Determining Safety Inspection Thresholds for Employee Incentives Programs on Construction Sites

PubMed Central

Sparer, Emily; Dennerlein, Jack

2017-01-01

The goal of this project was to evaluate approaches of determining the numerical value of a safety inspection score that would activate a reward in an employee safety incentive program. Safety inspections are a reflection of the physical working conditions at a construction site and provide a safety score that can be used in incentive programs to reward workers. Yet it is unclear what level of safety should be used when implementing this kind of program. This study explored five ways of grouping safety inspection data collected during 19 months at Harvard University-owned construction projects. Each approach grouped the data by one of the following: owner, general contractor, project, trade, or subcontractor. The median value for each grouping provided the threshold score. These five approaches were then applied to data from a completed project in order to calculate the frequency and distribution of rewards in a monthly safety incentive program. The application of each approach was evaluated qualitatively for consistency, competitiveness, attainability, and fairness. The owner-specific approach resulted in a threshold score of 96.3% and met all of the qualitative evaluation goals. It had the most competitive reward distribution (only 1/3 of the project duration) yet it was also attainable. By treating all workers equally and maintaining the same value throughout the project duration, this approach was fair and consistent. The owner-based approach for threshold determination can be used by owners or general contractors when creating leading indicator incentives programs and by researchers in future studies on incentive program effectiveness. PMID:28638178

Measurement and standardization of eye safety for optical radiation of LED products

NASA Astrophysics Data System (ADS)

Mou, Tongsheng; Peng, Zhenjian

2013-06-01

The blue light hazard (BLH) to human eye's retina is now a new issue emerging in applications of artificial light sources. Especially for solid state lighting sources based on the blue chip-LED(GaN), the photons with their energy more than 2.4 eV show photochemical effects on the retina significantly, raising damage both in photoreceptors and retinal pigment epithelium. The photobiological safety of artificial light sources emitting optical radiation has gained more and more attention worldwide and addressed by international standards IEC 62471-2006(CIE S009/E: 2002). Meanwhile, it is involved in IEC safety specifications of LED lighting products and covered by European Directive 2006/25/EC on the minimum health and safety requirements regarding the exposure of the workers to artificial optical radiation. In practical applications of the safety standards, the measuring methods of optical radiation from LED products to eyes are important in establishment of executable methods in the industry. In 2011, a new project to develop the international standard of IEC TR62471-4,that is "Measuring methods of optical radiation related to photobiological safety", was approved and are now under way. This paper presents the concerned methods for the assessment of optical radiation hazards in the standards. Furthermore, a retina radiance meter simulating eye's optical geometry is also described, which is a potential tool for blue light hazard assessment of retinal exposure to optical radiation. The spectroradiometric method integrated with charge-coupled device(CCD) imaging system is introduced to provide more reliable results.

76 FR 64110 - Safety and Health Management Programs for Mines

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-17

... DEPARTMENT OF LABOR Mine Safety and Health Administration RIN 1219-AB71 Safety and Health Management Programs for Mines AGENCY: Mine Safety and Health Administration, Labor. ACTION: Notice of public meetings. SUMMARY: The Mine Safety and Health Administration (MSHA) is holding a public meeting, and plans...

78 FR 66987 - Railroad Safety Technology Program Grant Program

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-07

... carriers, railroad suppliers, and State and local governments for projects that have a public benefit of... projects . . . that have a public benefit of improved safety and network efficiency.'' To be eligible for... million. This grant program has a maximum 80-percent Federal and minimum 20-percent grantee cost share...

MedWatch, the FDA Safety Information and Adverse Event Reporting Program

MedlinePlus

... Information and Adverse Event Reporting Program MedWatch: The FDA Safety Information and Adverse Event Reporting Program Share ... use. [Posted 06/01/2018] More What's New FDA Approved Safety Information DailyMed (National Library of Medicine) ...

Applying health education theory to patient safety programs: three case studies.

PubMed

Gilkey, Melissa B; Earp, Jo Anne L; French, Elizabeth A

2008-04-01

Program planning for patient safety is challenging because intervention-oriented surveillance data are not yet widely available to those working in this nascent field. Even so, health educators are uniquely positioned to contribute to patient safety intervention efforts because their theoretical training provides them with a guide for designing and implementing prevention programs. This article demonstrates the utility of applying health education concepts from three prominent patient safety campaigns, including the concepts of risk perception, community participation, and social marketing. The application of these theoretical concepts to patient safety programs suggests that health educators possess a knowledge base and skill set highly relevant to patient safety and that their perspective should be increasingly brought to bear on the design and evaluation of interventions that aim to protect patients from preventable medical error.

Educational Alternatives for Boating Safety Programs. Final Report.

ERIC Educational Resources Information Center

Sager, E.; And Others

The Coast Guard, in efforts to improve the safety of recreational boating, undertook research to identify educational alternatives in boating safety programs. Background research was done to assess materials from areas of boating education and education in comparable recreational areas. Research was also conducted to review educational and mass…

45 CFR 2543.84 - Contract Work Hours and Safety Standards Act.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 4 2010-10-01 2010-10-01 false Contract Work Hours and Safety Standards Act. 2543... laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work week is... pay for all hours worked in excess of 40 hours in the work week. Section 107 of the Act is applicable...

Occupational Health and Safety Program at Metropolitan State College.

ERIC Educational Resources Information Center

Dewey, Fred M.

1981-01-01

Reviews various aspects of the Occupational Health and Safety (OH&S) Program at Metropolitan State College, Denver, including the historical development of the program, its curriculum, continuing education courses, and resources for the OH&S Program. (CS)

42 CFR 9.10 - Occupational Health and Safety Program (OHSP) and biosafety requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 1 2013-10-01 2013-10-01 false Occupational Health and Safety Program (OHSP) and... SANCTUARY SYSTEM § 9.10 Occupational Health and Safety Program (OHSP) and biosafety requirements. (a) How are employee Occupational Health and Safety Program risks and concerns addressed? The sanctuary shall...

42 CFR 9.10 - Occupational Health and Safety Program (OHSP) and biosafety requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 1 2014-10-01 2014-10-01 false Occupational Health and Safety Program (OHSP) and... SANCTUARY SYSTEM § 9.10 Occupational Health and Safety Program (OHSP) and biosafety requirements. (a) How are employee Occupational Health and Safety Program risks and concerns addressed? The sanctuary shall...

42 CFR 9.10 - Occupational Health and Safety Program (OHSP) and biosafety requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 1 2012-10-01 2012-10-01 false Occupational Health and Safety Program (OHSP) and... SANCTUARY SYSTEM § 9.10 Occupational Health and Safety Program (OHSP) and biosafety requirements. (a) How are employee Occupational Health and Safety Program risks and concerns addressed? The sanctuary shall...

42 CFR 9.10 - Occupational Health and Safety Program (OHSP) and biosafety requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 1 2011-10-01 2011-10-01 false Occupational Health and Safety Program (OHSP) and... SANCTUARY SYSTEM § 9.10 Occupational Health and Safety Program (OHSP) and biosafety requirements. (a) How are employee Occupational Health and Safety Program risks and concerns addressed? The sanctuary shall...

42 CFR 9.10 - Occupational Health and Safety Program (OHSP) and biosafety requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Occupational Health and Safety Program (OHSP) and... SANCTUARY SYSTEM § 9.10 Occupational Health and Safety Program (OHSP) and biosafety requirements. (a) How are employee Occupational Health and Safety Program risks and concerns addressed? The sanctuary shall...

Relationship between internal medicine program board examination pass rates, accreditation standards, and program size.

PubMed

Falcone, John L; Gonzalo, Jed D

2014-01-19

To determine Internal Medicine residency program compliance with the Accreditation Council for Graduate Medical Education 80% pass-rate standard and the correlation between residency program size and performance on the American Board of Internal Medicine Certifying Examination. Using a cross-sectional study design from 2010-2012 American Board of Internal Medicine Certifying Examination data of all Internal Medicine residency pro-grams, comparisons were made between program pass rates to the Accreditation Council for Graduate Medical Education pass-rate standard. To assess the correlation between program size and performance, a Spearman's rho was calculated. To evaluate program size and its relationship to the pass-rate standard, receiver operative characteristic curves were calculated. Of 372 Internal Medicine residency programs, 276 programs (74%) achieved a pass rate of =80%, surpassing the Accreditation Council for Graduate Medical Education minimum standard. A weak correlation was found between residency program size and pass rate for the three-year period (p=0.19, p<0.001). The area underneath the receiver operative characteristic curve was 0.69 (95% Confidence Interval [0.63-0.75]), suggesting programs with less than 12 examinees/year are less likely to meet the minimum Accreditation Council for Graduate Medical Education pass-rate standard (sensitivity 63.8%, specificity 60.4%, positive predictive value 82.2%, p<0.001). Although a majority of Internal Medicine residency programs complied with Accreditation Council for Graduate Medical Education pass-rate standards, a quarter of the programs failed to meet this requirement. Program size is positively but weakly associated with American Board of Internal Medicine Certifying Examination performance, suggesting other unidentified variables significantly contribute to program performance.

78 FR 2662 - Proposed Extension of Approval of Information Collection; Comment Request: Safety Standard for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-14

... Information Collection; Comment Request: Safety Standard for Cigarette Lighters AGENCY: Consumer Product... disposable and novelty cigarette lighters. This collection of information consists of testing and recordkeeping requirements in certification regulations implementing the Safety Standard for Cigarette Lighters...

Programs That Support Safety and Security for the Transit Industry

DOT National Transportation Integrated Search

2001-03-01

FTA's Office of Safety and Security (Office) directly supports the U.S. Department of Transportation's safety goals through a series of programs designed to maintain continuous improvement in the safety and security of our nation's transit systems. T...

FMCSA safety program effectiveness measurement : Roadside Intervention Effectiveness Model, fiscal year 2010 : [analysis brief].

DOT National Transportation Integrated Search

2014-11-01

Two of the Federal Motor Carrier Safety Administrations (FMCSAs) key safety programs are the Roadside Inspection and Traffic Enforcement programs. The Roadside Inspection program consists of roadside inspections performed by qualified safety in...

FMCSA safety program effectiveness measurement : Roadside Intervention Effectiveness Model FY 2012, [analysis brief].

DOT National Transportation Integrated Search

2016-02-01

Roadside Inspection and Traffic Enforcement are two of : the Federal Motor Carrier Safety Administrations : (FMCSAs) key safety programs. The Roadside : Inspection Program consists of roadside inspections : performed by qualified safety inspect...

Canadian Pacific Railway mechanical services' 5-Alive safety program shows promise in reducing injuries.

DOT National Transportation Integrated Search

2006-09-01

The Federal Railroad Administration (FRA) Human Factors Research and Development (R&D) Program is sponsoring an Alternative Safety Measures Program to explore alternative methods for evaluating whether safety programs improve safety outcomes and the ...

Statewide Collaborative to Reduce Surgical Site Infections: Results of the Hawaii Surgical Unit-Based Safety Program.

PubMed

Lin, Della M; Carson, Kathryn A; Lubomski, Lisa H; Wick, Elizabeth C; Pham, Julius Cuong

2018-05-18

Surgical site infections (SSIs) after colorectal surgery are common, lead to patient harm, and are costly to the healthcare system. This study's purpose was to evaluate the effectiveness of the AHRQ Safety Program for Surgery in Hawaii. This pre-post cohort study involved 100% of 15 hospitals in Hawaii from January 2013 through June 2015. The intervention was a statewide implementation of the Comprehensive Unit-Based Safety Program and individualized bundles of interventions to reduce SSIs. Primary end point was colorectal SSIs. Secondary end point was safety culture measured by the AHRQ Hospital Survey on Patient Safety Culture. The most common interventions implemented were reliable chlorhexidine wash, wipe before operation, and surgical preparation; appropriate antibiotic choice, dose, and timing; standardized post-surgical debriefing; and differentiating clean-dirty-clean with anastomosis tray and closing tray. From January 2013 (quarter 1) through June 2015 (quarter 2), the collaborative colorectal SSI rate decreased (from 12.08% to 4.63%; p < 0.01). The SSI rate exhibited a linear decrease during the 10-quarter period (p = 0.005). Safety culture increased in 10 of 12 domains: Overall Perception/Patient Safety (from 49% to 53%); Teamwork Across Units (from 49% to 54%); Management-Support Patient Safety (from 53% to 60%); Nonpunitive Response to Error (from 36% to 40%); Communication Openness (from 50% to 55%); Frequency of Events Reported (from 51% to 60%); Feedback/Communication about Error (from 52% to 59%); Organizational Learning/Continuous Improvement (from 59% to 70%); Supervisor/Manager Expectations and Actions Promoting Safety (from 58% to 64%); and Teamwork Within Units (from 68% to 75%) (all p < 0.05). Participation in the national AHRQ Safety Program for Surgery in the state of Hawaii was associated with a 61.7% decrease in colorectal SSI rate and an increase in patient safety culture. Copyright © 2018 American College of Surgeons. Published by

A study of science leadership and science standards in exemplary standards-based science programs

NASA Astrophysics Data System (ADS)

Carpenter, Wendy Renae

The purpose for conducting this qualitative study was to explore best practices of exemplary standards-based science programs and instructional leadership practices in a charter high school and in a traditional high school. The focus of this study included how twelve participants aligned practices to National Science Education Standards to describe their science programs and science instructional practices. This study used a multi-site case study qualitative design. Data were obtained through a review of literature, interviews, observations, review of educational documents, and researcher's notes collected in a field log. The methodology used was a multi-site case study because of the potential, through cross analysis, for providing greater explanation of the findings in the study (Merriam, 1988). This study discovered six characteristics about the two high school's science programs that enhance the literature found in the National Science Education Standards; (a) Culture of expectations for learning-In exemplary science programs teachers are familiar with a wide range of curricula. They have the ability to examine critically and select activities to use with their students to promote the understanding of science; (b) Culture of varied experiences-In exemplary science programs students are provided different paths to learning, which help students, take in information and make sense of concepts and skills that are set forth by the standards; (c) Culture of continuous feedback-In exemplary science programs teachers and students work together to engage students in ongoing assessments of their work and that of others as prescribed in the standards; (d) Culture of Observations-In exemplary science programs students, teachers, and principals reflect on classroom instructional practices; teachers receive ongoing evaluations about their teaching and apply feedback towards improving practices as outlined in the standards; (e) Culture of continuous learning-In exemplary

FMCSA safety program effectiveness measurement : roadside intervention effectiveness model FY 2011 : [analysis brief].

DOT National Transportation Integrated Search

2015-06-01

Roadside Inspection and Traffic Enforcement are two of the Federal Motor Carrier Safety Administrations (FMCSAs) key safety programs. The Roadside Inspection program consists of roadside inspections performed by qualified safety inspectors. The...

76 FR 74723 - New Car Assessment Program (NCAP); Safety Labeling

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-01

... DEPARTMENT OF TRANSPORTATION National Highway Traffic Safety Administration 49 CFR Part 575 [Docket No. NHTSA 2010-0025] RIN 2127-AK51 New Car Assessment Program (NCAP); Safety Labeling AGENCY: National Highway Traffic Safety Administration (NHTSA), Department of Transportation (DOT). ACTION...

Prevalence and determinants of non-standard motorcycle safety helmets amongst food delivery workers in Selangor and Kuala Lumpur.

PubMed

Kulanthayan, S; See, Lai Git; Kaviyarasu, Y; Nor Afiah, M Z

2012-05-01

Almost half of the global traffic crashes involve vulnerable groups such as pedestrian, cyclists and two-wheeler users. The main objective of this study was to determine the factors that influence standard of the safety helmets used amongst food delivery workers by presence of Standard and Industrial Research Institute of Malaysia (SIRIM) certification label. A cross sectional study was conducted amongst 150 food delivery workers from fast food outlets in the vicinity of Selangor and Kuala Lumpur. During observation, safety helmets were classified as standard safety helmet in the presence of SIRIM label and non-standard in the absence of the label. They were approached for questionnaire participation once consent was obtained and were requested to exchange their safety helmet voluntarily with a new one after the interview. Data analysis was carried out using SPSS. Chi square and logistic regression analysis was applied to determine the significance and odds ratio of the variables studied, respectively (penetration test, age, education level, knowledge, crash history, types of safety helmet, marital status and years of riding experience) against the presence of SIRIM label. The response rate for this study was 85.2%. The prevalence of non-standard helmets use amongst fast food delivery workers was 55.3%. Safety helmets that failed the penetration test had higher odds of being non-standard helmets compared with safety helmets passing the test. Types of safety helmet indicated half-shell safety helmets had higher odds to be non-standard safety helmets compared to full-shell safety helmets. Riders with more years of riding experience were in high odds of wearing non-standard safety helmets compared to riders with less riding experience. Non-standard (non-SIRIM approved) helmets were more likely to be half-shell helmets, were more likely to fail the standards penetration test, and were more likely to be worn by older, more experienced riders. The implications of these

Transportation of natural and other gases and liquids by pipeline occupational safety and health standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1979-05-17

The U.S. Materials Transportation Bureau (MTB) withdraws an advanced notice of proposed rulemaking (ANPR) which requested advice, recommendations, and information relating to the issuance of additional occupational safety and health standards for the protection of employees engaged in the construction, operation, and maintenance of pipeline systems and facilities used in the transportation of hazardous materials. Comments submitted in response to the ANPR indicated that the issuance of additional occupational safety and health standards by the MTB would be a duplication of the U.S. Occupational Safety and Health Administration's efforts and would increase the possibility of jurisdictional disputes. Since the MTB'smore » present standards development efforts are primarily directed at public safety (as opposed to occupational safety) by regulating pipeline design, construction, operation, and maintenance activities, the MTB withdraws the ANPR.« less

29 CFR 500.133 - Substantive Federal and State safety and health standards defined.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 3 2014-07-01 2014-07-01 false Substantive Federal and State safety and health standards defined. 500.133 Section 500.133 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION... Migrant Workers Housing Safety and Health § 500.133 Substantive Federal and State safety and health...

A comprehensive perinatal patient safety program to reduce preventable adverse outcomes and costs of liability claims.

PubMed

Simpson, Kathleen Rice; Kortz, Carol C; Knox, G Eric

2009-11-01

To achieve the goal of safe care for mothers and infants during labor and birth, Catholic Healthcare Partners (CHP; Cincinnati) conducted on-site risk assessments at the 16 hospitals with perinatal units in 2004-2005, with follow-up visits in 2006 through 2008. ON-SITE RISK ASSESSMENTS: In addition to assessing overall organizational risk, the assessments provided each hospital a gap analysis demonstrating up-to-date and outdated practices and strategies and resources necessary to make all practices consistent with current evidence and national guidelines and standards. CRITICAL ASPECTS OF CLINICAL CARE: Review of claims and near-miss data indicate that fetal assessment, labor induction, and second-stage labor care comprise the majority of risk of perinatal harm. Therefore, these clinical areas were the focus of strategies to promote safety. To promote consistency in knowledge and practice, in 2004 a variety of strategies were recommended, including interdisciplinary fetal monitoring education and routine medical record reviews to monitor ongoing adherence to appropriate practice and documentation. Success in implementing essential structural and process components of the perinatal patient safety program have resulted in improvement from 2003 to 2008 in specific outcomes for the 16 perinatal units surveyed, including reduction of perinatal harm, number of claims, and costs of claims. The program continues to evolve with modifications as needed as more evidence becomes available to guide best perinatal practices and new guidelines/standards are published. A patient safety program guided and supported by a health care system can result in safer clinical environments in individual hospitals and in decreased risk of preventable perinatal harm and liability costs.

The Impact of a Patient Safety Program on Medical Error Reporting

DTIC Science & Technology

2005-05-01

307 The Impact of a Patient Safety Program on Medical Error Reporting Donald R. Woolever Abstract Background: In response to the occurrence of...a sentinel event—a medical error with serious consequences—Eglin U.S. Air Force (USAF) Regional Hospital developed and implemented a patient safety...communication, teamwork, and reporting. Objective: To determine the impact of a patient safety program on patterns of medical error reporting. Methods: This

Waste isolation safety assessment program. Task 4. Third contractor information meeting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1980-06-01

The Contractor Information Meeting (October 14 to 17, 1979) was part of the FY-1979 effort of Task 4 of the Waste Isolation Safety Assessment Program (WISAP): Sorption/Desorption Analysis. The objectives of this task are to: evaluate sorption/desorption measurement methods and develop a standardized measurement procedure; produce a generic data bank of nuclide-geologic interactions using a wide variety of geologic media and groundwaters; perform statistical analysis and synthesis of these data; perform validation studies to compare short-term laboratory studies to long-term in situ behavior; develop a fundamental understanding of sorption/desorption processes; produce x-ray and gamma-emitting isotopes suitable for the study ofmore » actinides at tracer concentrations; disseminate resulting information to the international technical community; and provide input data support for repository safety assessment. Conference participants included those subcontracted to WISAP Task 4, representatives and independent subcontractors to the Office of Nuclear Waste Isolation, representatives from other waste disposal programs, and experts in the area of waste/geologic media interaction. Since the meeting, WISAP has been divided into two programs: Assessment of Effectiveness of Geologic Isolation Systems (AEGIS) (modeling efforts) and Waste/Rock Interactions Technology (WRIT) (experimental work). The WRIT program encompasses the work conducted under Task 4. This report contains the information presented at the Task 4, Third Contractor Information Meeting. Technical Reports from the subcontractors, as well as Pacific Northwest Laboratory (PNL), are provided along with transcripts of the question-and-answer sessions. The agenda and abstracts of the presentations are also included. Appendix A is a list of the participants. Appendix B gives an overview of the WRIT program and details the WRIT work breakdown structure for 1980.« less

Business Technology Education. Vocational Education Program Courses Standards.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Applied Tech., Adult, and Community Education.

This document contains vocational education program course standards (curriculum frameworks and student performance standards) for exploratory courses, practical arts courses, and job preparatory programs offered at the secondary and postsecondary level as part of the business technology education component of Florida's comprehensive vocational…

Health Science Education. Vocational Education Program Courses Standards.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Applied Tech., Adult, and Community Education.

This document contains vocational education program course standards (curriculum frameworks and student performance standards) for exploratory courses, practical arts courses, and job preparatory programs offered at the secondary and postsecondary level as part of the health science education component of Florida's comprehensive vocational…

Public Service Education. Vocational Education Program Courses Standards.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Applied Tech., Adult, and Community Education.

This document contains vocational education program course standards (curriculum frameworks and student performance standards) for exploratory courses, practical arts courses, and job preparatory programs offered at the secondary and postsecondary level as part of the public service education component of Florida's comprehensive vocational…

75 FR 17861 - 2010 Standard Mail Incentive Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-08

...The Postal Service is revising Mailing Standards of the United States Postal Service, Domestic Mail Manual (DMM[supreg]), to replace existing section 709.2 with new standards for a volume incentive program for mailers of Standard Mail[supreg] letters and flats with mail volume exceeding their individual USPS[supreg]--determined threshold levels. The program period will be from July 1, 2010 through September 30, 2010.

25 CFR 170.143 - How can IRR Program funds be used for highway safety?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 1 2014-04-01 2014-04-01 false How can IRR Program funds be used for highway safety? 170... RESERVATION ROADS PROGRAM Indian Reservation Roads Program Policy and Eligibility Highway Safety Functions § 170.143 How can IRR Program funds be used for highway safety? A tribe, tribal organization, tribal...

25 CFR 170.143 - How can IRR Program funds be used for highway safety?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 1 2013-04-01 2013-04-01 false How can IRR Program funds be used for highway safety? 170... RESERVATION ROADS PROGRAM Indian Reservation Roads Program Policy and Eligibility Highway Safety Functions § 170.143 How can IRR Program funds be used for highway safety? A tribe, tribal organization, tribal...

25 CFR 170.143 - How can IRR Program funds be used for highway safety?

Code of Federal Regulations, 2012 CFR

2012-04-01

... 25 Indians 1 2012-04-01 2011-04-01 true How can IRR Program funds be used for highway safety? 170... RESERVATION ROADS PROGRAM Indian Reservation Roads Program Policy and Eligibility Highway Safety Functions § 170.143 How can IRR Program funds be used for highway safety? A tribe, tribal organization, tribal...

25 CFR 170.143 - How can IRR Program funds be used for highway safety?

Code of Federal Regulations, 2011 CFR

2011-04-01

... RESERVATION ROADS PROGRAM Indian Reservation Roads Program Policy and Eligibility Highway Safety Functions § 170.143 How can IRR Program funds be used for highway safety? A tribe, tribal organization, tribal... 25 Indians 1 2011-04-01 2011-04-01 false How can IRR Program funds be used for highway safety? 170...

25 CFR 170.143 - How can IRR Program funds be used for highway safety?

Code of Federal Regulations, 2010 CFR

2010-04-01

... RESERVATION ROADS PROGRAM Indian Reservation Roads Program Policy and Eligibility Highway Safety Functions § 170.143 How can IRR Program funds be used for highway safety? A tribe, tribal organization, tribal... 25 Indians 1 2010-04-01 2010-04-01 false How can IRR Program funds be used for highway safety? 170...

The Effectiveness of a Bicycle Safety Program for Improving Safety-Related Knowledge and Behavior in Young Elementary Students

PubMed Central

Glang, Ann

2010-01-01

Objective The purpose of this study was to evaluate the “Bike Smart” program, an eHealth software program that teaches bicycle safety behaviors to young children. Methods Participants were 206 elementary students in grades kindergarten to 3. A random control design was employed to evaluate the program, with students assigned to either the treatment condition (Bike Smart) or the control condition (a video on childhood safety). Outcome measures included computer-based knowledge items (safety rules, helmet placement, hazard discrimination) and a behavioral measure of helmet placement. Results Results demonstrated that regardless of gender, cohort, and grade the participants in the treatment group showed greater gains than control participants in both the computer-presented knowledge items (p > .01) and the observational helmet measure (p > .05). Conclusions Findings suggest that the Bike Smart program can be a low cost, effective component of safety training packages that include both skills-based and experiential training. PMID:19755497

Health Occupations Education. Vocational Education Program Courses Standards.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Vocational, Adult, and Community Education.

This document contains vocational education program courses standards (curriculum frameworks and student performance standards) for exploratory courses, practical arts courses, and job preparatory programs in health occupations (HO) education offered at the secondary or postsecondary level as a part of Florida's comprehensive vocational education…

41 CFR 101-26.501-2 - Standardized buying programs.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS SUPPLY AND PROCUREMENT 26-PROCUREMENT SOURCES AND PROGRAM 26.5-GSA Procurement Programs § 101-26.501-2 Standardized buying programs. Wherever... school age passenger. (4) Sedans and station wagons (based on standardized, consolidated requirements...

78 FR 73692 - Revisions to Safety Standards for Infant Bath Seats, Toddler Beds, and Full-Size Baby Cribs

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-09

... standard issued under the Danny Keysar Child Product Safety Notification Act was based, the revision... standard. Section 26(c) of the CPSA also provides that states or political subdivisions of states may apply... CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Parts 1215, 1217 and 1219 Revisions to Safety Standards...

78 FR 63019 - Safety Standard for Bassinets and Cradles

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-23

... directly attributable to product stability, the instability of the product, in many incidents, was to blame... stability test procedure, and (2) the addition of new provisions for a segmented mattress flatness test and a removable bed stability requirement. In this document, the Commission is issuing a safety standard...

42 CFR 486.108 - Condition for coverage: Safety standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 5 2011-10-01 2011-10-01 false Condition for coverage: Safety standards. 486.108 Section 486.108 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN... BY SUPPLIERS Conditions for Coverage: Portable X-Ray Services § 486.108 Condition for coverage...

30 CFR 75.1702-1 - Smoking programs.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Smoking programs. 75.1702-1 Section 75.1702-1 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Miscellaneous § 75.1702-1 Smoking programs. Programs...

30 CFR 75.1702-1 - Smoking programs.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Smoking programs. 75.1702-1 Section 75.1702-1 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Miscellaneous § 75.1702-1 Smoking programs. Programs...

30 CFR 75.1702-1 - Smoking programs.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Smoking programs. 75.1702-1 Section 75.1702-1 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Miscellaneous § 75.1702-1 Smoking programs. Programs...

30 CFR 75.1702-1 - Smoking programs.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Smoking programs. 75.1702-1 Section 75.1702-1 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Miscellaneous § 75.1702-1 Smoking programs. Programs...

30 CFR 75.1702-1 - Smoking programs.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Smoking programs. 75.1702-1 Section 75.1702-1 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Miscellaneous § 75.1702-1 Smoking programs. Programs...

Safety words inventory and literacy screener: standardization and validation.

PubMed

Glascoe, Frances Page

2002-01-01

When evaluating a school-aged patient, particularly for such issues as attention deficit disorder, or learning disabilities, health-care providers are encouraged to appraise children's school performance. Although some clinicians seek teachers' comments, recent research suggests that teachers' appraisals have limited value. As a consequence, health-care providers need brief methods, functional for busy primary care clinics, for detecting school problems. Because well-visits also include other services such as anticipatory guidance and safety and injury counseling, it would be helpful for detection tools to facilitate delivery of more than one aspect of well-child care. This study was undertaken to develop a brief method for evaluating school performance for elementary-age children and test its accuracy in identifying children with reading and other academic problems. By using common safety signs as the test stimuli, such a tool should also serve as a springboard to injury prevention counseling. Data were drawn from the standardization and validation data of an individually administered wide-range diagnostic achievement test using a geographically diverse, nationally representative sample of 934 children between 5 and 13 years of age. Children were administered the Comprehensive Inventory of Basic Skills-Revised (CIBS-R), which includes among its 10 subtests a 57-item measure of safety word recognition. Data were collected from previously administered measures of academics and intelligence. Forty-one children were administered the measure twice to assess inter-rater reliability. Logistic regression analyses were deployed using children's performance on the nine other subtests of the CIBS-R as the grouping variable, and as predictors, recognition of 57 safety words/phrases. Of these, 22 safety signs (e.g., "Keep out," "No Trespassing," "Danger") were significant predictors of overall academic performance. An additional seven safety words were added due to their

Commercial Crew Program Crew Safety Strategy

NASA Technical Reports Server (NTRS)

Vassberg, Nathan; Stover, Billy

2015-01-01

The purpose of this presentation is to explain to our international partners (ESA and JAXA) how NASA is implementing crew safety onto our commercial partners under the Commercial Crew Program. It will show them the overall strategy of 1) how crew safety boundaries have been established; 2) how Human Rating requirements have been flown down into programmatic requirements and over into contracts and partner requirements; 3) how CCP SMA has assessed CCP Certification and CoFR strategies against Shuttle baselines; 4) Discuss how Risk Based Assessment (RBA) and Shared Assurance is used to accomplish these strategies.

78 FR 40443 - Submission for OMB Review; Comment Request-Recordkeeping Requirements Under the Safety Standard...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-05

... Request--Recordkeeping Requirements Under the Safety Standard for Infant Walkers AGENCY: Consumer Product... for infant walkers, 16 CFR part 1216. No comments were received in response to that notice. Therefore... has been incorporated by reference in the safety standard for infant walkers, 16 CFR part 1216...

77 FR 63800 - Proposed Extension of Approval of Information Collection; Comment Request-Safety Standard for...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-17

... CONSUMER PRODUCT SAFETY COMMISSION Proposed Extension of Approval of Information Collection; Comment Request--Safety Standard for Walk-Behind Power Lawn Mowers AGENCY: Consumer Product Safety.... Chapter 35), the Consumer Product Safety Commission (CPSC) requested comments on a proposed extension of...

Edible safety requirements and assessment standards for agricultural genetically modified organisms.

PubMed

Deng, Pingjian; Zhou, Xiangyang; Zhou, Peng; Du, Zhong; Hou, Hongli; Yang, Dongyan; Tan, Jianjun; Wu, Xiaojin; Zhang, Jinzhou; Yang, Yongcun; Liu, Jin; Liu, Guihua; Li, Yonghong; Liu, Jianjun; Yu, Lei; Fang, Shisong; Yang, Xiaoke

2008-05-01

This paper describes the background, principles, concepts and methods of framing the technical regulation for edible safety requirement and assessment of agricultural genetically modified organisms (agri-GMOs) for Shenzhen Special Economic Zone in the People's Republic of China. It provides a set of systematic criteria for edible safety requirements and the assessment process for agri-GMOs. First, focusing on the degree of risk and impact of different agri-GMOs, we developed hazard grades for toxicity, allergenicity, anti-nutrition effects, and unintended effects and standards for the impact type of genetic manipulation. Second, for assessing edible safety, we developed indexes and standards for different hazard grades of recipient organisms, for the influence of types of genetic manipulation and hazard grades of agri-GMOs. To evaluate the applicability of these criteria and their congruency with other safety assessment systems for GMOs applied by related organizations all over the world, we selected some agri-GMOs (soybean, maize, potato, capsicum and yeast) as cases to put through our new assessment system, and compared our results with the previous assessments. It turned out that the result of each of the cases was congruent with the original assessment.

Highway Safety Program Manual: Volume 9: Identification and Surveillance of Accident Locations.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 9 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) focuses on identification and surveillance of accident locations. The purpose of the program, its specific objectives, and its relationship with other programs are explored. Federal authority in the…

29 CFR 1960.16 - Compliance with OSHA standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH... comply with all occupational safety and health standards issued under section 6 of the Act, or with...