Cosmogenic-nuclide production by primary cosmic-ray protons

NASA Technical Reports Server (NTRS)

Reedy, R. C.

1985-01-01

The production rates of cosmogenic nuclides were calculated for the primary protons in the galactic and solar cosmic rays. At 1 AU, the long-term average fluxes of solar protons usually produce many more atoms of cosmogenic nuclide than the primary protons in the galactic cosmic rays (GCR). Because the particle fluxes inside meteorites and other large objects in space include many secondary neutrons, the production rates and ratios inside large objects are often very different from those by just the primary GCR protons. It is possible to determine if a small object, was small in space or broken from a meteorite. Because heliospherical modulation and other interactions change the GCR particle spectrum, the production of cosmogenic nuclides by the GCR particles outside the heliosphere will be different from that by modulated GCR primaries.

Approach for validating actinide and fission product compositions for burnup credit criticality safety analyses

DOE PAGES

Radulescu, Georgeta; Gauld, Ian C.; Ilas, Germina; ...

2014-11-01

This paper describes a depletion code validation approach for criticality safety analysis using burnup credit for actinide and fission product nuclides in spent nuclear fuel (SNF) compositions. The technical basis for determining the uncertainties in the calculated nuclide concentrations is comparison of calculations to available measurements obtained from destructive radiochemical assay of SNF samples. Probability distributions developed for the uncertainties in the calculated nuclide concentrations were applied to the SNF compositions of a criticality safety analysis model by the use of a Monte Carlo uncertainty sampling method to determine bias and bias uncertainty in effective neutron multiplication factor. Application ofmore » the Monte Carlo uncertainty sampling approach is demonstrated for representative criticality safety analysis models of pressurized water reactor spent fuel pool storage racks and transportation packages using burnup-dependent nuclide concentrations calculated with SCALE 6.1 and the ENDF/B-VII nuclear data. Furthermore, the validation approach and results support a recent revision of the U.S. Nuclear Regulatory Commission Interim Staff Guidance 8.« less

Scaling in situ cosmogenic nuclide production rates using analytical approximations to atmospheric cosmic-ray fluxes

NASA Astrophysics Data System (ADS)

Lifton, Nathaniel; Sato, Tatsuhiko; Dunai, Tibor J.

2014-01-01

factors based on recently updated neutron and proton excitation functions (probability of nuclide production in a given nuclear reaction as a function of energy) for commonly measured in situ cosmogenic nuclides. Such scaling factors reflect the influence of the energy distribution of the flux folded with the relevant excitation functions. Resulting scaling factors indicate 3He shows the strongest positive deviation from the flux-based scaling, while 14C exhibits a negative deviation. These results are consistent with a recent Monte Carlo-based study using a different cosmic-ray physics code package but the same excitation functions.

Electrical safety of conducted electrical weapons relative to requirements of relevant electrical standards.

PubMed

Panescu, Dorin; Nerheim, Max; Kroll, Mark

2013-01-01

TASER(®) conducted electrical weapons (CEW) deliver electrical pulses that can inhibit a person's neuromuscular control or temporarily incapacitate. TASER X26, X26P, and X2 are among CEW models most frequently deployed by law enforcement agencies. The X2 CEW uses two cartridge bays while the X26 and X26P CEWs have only one. The TASER X26P CEW electronic output circuit design is equivalent to that of any one of the two TASER X2 outputs. The goal of this paper was to analyze the nominal electrical outputs of TASER X26, X26P, and X2 CEWs in reference to provisions of several international standards that specify safety requirements for electrical medical devices and electrical fences. Although these standards do not specifically mention CEWs, they are the closest electrical safety standards and hence give very relevant guidance. The outputs of two TASER X26 and two TASER X2 CEWs were measured and confirmed against manufacturer and other published specifications. The TASER X26, X26P, and X2 CEWs electrical output parameters were reviewed against relevant safety requirements of UL 69, IEC 60335-2-76 Ed 2.1, IEC 60479-1, IEC 60479-2, AS/NZS 60479.1, AS/NZS 60479.2 and IEC 60601-1. Prior reports on similar topics were reviewed as well. Our measurements and analyses confirmed that the nominal electrical outputs of TASER X26, X26P and X2 CEWs lie within safety bounds specified by relevant requirements of the above standards.

Evaluation of the safety of mobile units for the conditioning of radioactive waste

DOE Office of Scientific and Technical Information (OSTI.GOV)

Filss, Martin; Wallner, Christian

2013-07-01

In Germany mobile units are used to treat and condition radioactive waste. On behalf of the relevant authorities TUV SUD Industrie Service GmbH evaluates their safety. In this paper we outline the general procedure we apply and point out typical results. Generally, a generic safety case evaluates the effects of incidents and accidents and its consequences for the workers and the public. Special care is necessary to define the radioactive inventory, the nuclide composition and the mobility of the radioactive substances. A systems analysis is carried out. Typical aspects to be considered are the handling procedures, the measurement devices andmore » automatic actions. From the various possible malfunctions the critical ones have to be identified. Generally one or only a few scenarios have to be considered in detail. (authors)« less

Patient safety challenges in a case study hospital--of relevance for transfusion processes?

PubMed

Aase, Karina; Høyland, Sindre; Olsen, Espen; Wiig, Siri; Nilsen, Stein Tore

2008-10-01

The paper reports results from a research project with the objective of studying patient safety, and relates the finding to safety issues within transfusion medicine. The background is an increased focus on undesired events related to diagnosis, medication, and patient treatment in general in the healthcare sector. The study is designed as a case study within a regional Norwegian hospital conducting specialised health care services. The study includes multiple methods such as interviews, document analysis, analysis of error reports, and a questionnaire survey. Results show that the challenges for improved patient safety, based on employees' perceptions, are hospital management support, reporting of accidents/incidents, and collaboration across hospital units. Several of these generic safety challenges are also found to be of relevance for a hospital's transfusion service. Positive patient safety factors are identified as teamwork within hospital units, a non-punitive response to errors, and unit manager's actions promoting safety.

Cosmogenic Nuclides Study of Large Iron Meteorites

NASA Astrophysics Data System (ADS)

Hutzler, A.; Smith, T.; Rochette, P.; Bourles, D. L.; Leya, I.; Gattacceca, J.

2014-09-01

Six large iron meteorites were selected (Saint-Aubin, Mont-Dieu, Caille, Morasko, Agoudal, and Gebel Kamil). We measured stable and radiogenic cosmogenic nuclides, to study pre-atmospheric size, cosmic-ray exposure ages and terrestrial ages.

Interactive Chart of Nuclides

Science.gov Websites

Chart of Nuclides Click on a nucleus for information Color code Half-life Decay Mode Qβ- QEC QÎ Radiation Help - Glossary This site is better seen using the latest version of internet browsers. Database ²+ Sn Sp Qα S2n S2p Q2β- Q2EC QECp Qβ-n BE/A (BE-LDM Fit)/A E1st ex. st. E2+ E3- E4+ E4+/E2+ β2 B(E2

Cross Sections for the Production of Cosmogenic Nuclides with Protons up to 400 MeV for the Interpretation of Cosmic-Ray-produced Nuclides

NASA Astrophysics Data System (ADS)

Schiekel, Th.; Rosel, R.; Herpers, U.; Bodemann, R.; Leya, I.; Gloris, M.; Michel, R.; Dittrich, B.; Kubik, P.; Suter, M.

1993-07-01

Integral excitation functions of the cosmogenic nuclides are the basic requirement for the interpretation of interactions between cosmic ray particles and extraterrestrial and terrestrial matter. Together with the knowledge of primary and secondary particle fields inside an irradiated body, model calculations can be developed to interpret abundances of cosmogenic nuclides in dependencies of the irradiation history of the irradiated body and of the cosmic particle ray itself. The quality of those model calculations depends on the quality of the available cross-section database, which is neither comprehensive nor reliable for the most important nuclides like the long-lived radionuclides (i.e., 10Be, 26Al, 36Cl, 41Ca) and the stable rare gas isotopes. For a systematic investigation in this field of science we carried out several irradiation experiments with protons in the energy region between 45 MeV and 400 MeV at the Paul Scherrer Institut (Villigen, Switzerland) and the Laboratoire Nationale Saturne (Saclay, France) using the stacked foil technique. We included 21 different target elements with Z between 6 and 79 (C, N as Si3N4, O as SiO2, Mg, Al, Si, Ca as CaC2H2O4, Ti, V, Mn as Mn/Ni alloy, Fe, Co, Ni, Cu, Sr as SrF2, Y, Zr, Nb, Rh, Ba as Ba containing glass and Au) in our experiments. The proton fluxes were monitored via the reaction 27Al(p,3p3n)22Na using the evaluated data of [1]. Residual nuclides were measured by X-, gamma-, and after a chemical separation by accelerator mass spectrometry. In order to check the quality of our experimental procedures we included some target elements in our new experiments for which consistent excitation functions have already been determined [2,3,4]. Our new data show excellent agreement with the earlier measurements. We measured cross sections for more than 120 different reactions. Here we report on the results for target elements with Z up to 28. The exsisting database of experimental excitation functions for the production

Cosmogenic nuclide production within the atmosphere and long period comets

NASA Astrophysics Data System (ADS)

Overholt, Andrew C.

The Earth is constantly bombarded by cosmic rays. These high energy particles collide with target nuclei, producing a shower of secondary particles. These secondaries contribute significantly to the radiation background at sea level and in the atmosphere, as well as producing rare cosmogenic nuclides. This contribution is variable over long time scales as astrophysical events change the cosmic ray flux incident on the Earth. Our work re-examines a previously proposed climate effect of increased cosmic ray flux due to galactic location. Although our work does not support this effect, cosmic ray secondaries remain a threat to terrestrial biota. We calculate the cosmogenic neutron flux within the atmosphere as a function of primary spectrum. This work is pivotal in determining the radiation dose due to any arbitrary astrophysical event where the primary spectrum is known. Additionally, this work can be used to determine the cosmogenic nuclide production from such an event. These neutrons are the fundamental source of cosmogenic nuclides within our atmosphere and extraterrestrial matter. We explore the idea that excursions in 14C and 10Be abundances in the atmosphere may arise from direct deposition by long-period comet impacts, and those in 26Al from any bolide. We find that the amount of nuclide mass on large long-period comets entering the Earth's atmosphere may be sufficient for creating anomalies in the records of 14C and 10Be from past impacts. In particular, the estimated mass of the proposed Younger Dryas comet is consistent with its having deposited sufficient isotopes to account for recorded nuclide increases at that time. The 26Al/10Be ratio is much larger in extraterrestrial objects than in the atmosphere, and so, we note that measuring this ratio in ice cores is a suitable further test for the Younger Dryas impact hypothesis. This portion of our work may be used to find possible impact events in the geologic record as well as determination of a large

A new nuclide transport model in soil in the GENII-LIN health physics code

NASA Astrophysics Data System (ADS)

Teodori, F.

2017-11-01

The nuclide soil transfer model, originally included in the GENII-LIN software system, was intended for residual contamination from long term activities and from waste form degradation. Short life nuclides were supposed absent or at equilibrium with long life parents. Here we present an enhanced soil transport model, where short life nuclide contributions are correctly accounted. This improvement extends the code capabilities to handle incidental release of contaminant to soil, by evaluating exposure since the very beginning of the contamination event, before the radioactive decay chain equilibrium is reached.

WebCN: A web-based computation tool for in situ-produced cosmogenic nuclides

NASA Astrophysics Data System (ADS)

Ma, Xiuzeng; Li, Yingkui; Bourgeois, Mike; Caffee, Marc; Elmore, David; Granger, Darryl; Muzikar, Paul; Smith, Preston

2007-06-01

Cosmogenic nuclide techniques are increasingly being utilized in geoscience research. For this it is critical to establish an effective, easily accessible and well defined tool for cosmogenic nuclide computations. We have been developing a web-based tool (WebCN) to calculate surface exposure ages and erosion rates based on the nuclide concentrations measured by the accelerator mass spectrometry. WebCN for 10Be and 26Al has been finished and published at http://www.physics.purdue.edu/primelab/for_users/rockage.html. WebCN for 36Cl is under construction. WebCN is designed as a three-tier client/server model and uses the open source PostgreSQL for the database management and PHP for the interface design and calculations. On the client side, an internet browser and Microsoft Access are used as application interfaces to access the system. Open Database Connectivity is used to link PostgreSQL and Microsoft Access. WebCN accounts for both spatial and temporal distributions of the cosmic ray flux to calculate the production rates of in situ-produced cosmogenic nuclides at the Earth's surface.

Neogene basin infilling from cosmogenic nuclides (10Be and 21Ne) in Atacama, Chile

NASA Astrophysics Data System (ADS)

Sanchez, Caroline; Regard, Vincent; Carretier, Sébastien; Riquelme, Rodrigo; Blard, Pierre-Henri; Campos, Eduardo; Brichau, Stéphanie; Lupker, Marteen; Hérail, Gérard

2017-04-01

In the hyperarid Atacama Desert, northern Chile, Neogene sediments host copper rich layers (exotic supergene mineralization). Current mines are excavated into relatively thin (<200-300 m) Neogene basins whose infilling chronology is poorly constrained. We took advantage of one of these mining pits, and sampled for 10Be and 21Ne cosmogenic nuclide dosing. These cosmogenic nuclides help constraining the infilling chronology. Indeed, basin sediments were deposited with a cosmogenic nuclide content acquired on hillslopes. Then within the basin, cosmogenic nuclide concentrations evolved through the competing production (quickly decreasing with depth) and disintegration (not for 21Ne). Sampling depths are at ˜100 m and at ˜50 m below the desert surface. First, 21Ne gives lower boundaries for upstream erosion rates or local sedimentation rate. These bounds are between 2 and 10 m/Ma, which is quite important for the area. The ratio between the two cosmogenic nuclides indicate a maximum burial age of 12 Ma (minimal erosion rate of 15 m/Ma) and is surprisingly similar from bottom to top, indicating a probable rapid infilling. We finally processed a Monte-Carlo inversion. This inversion helps taking into account the post-deposition muonic production of cosmogenic nuclides. Inversion results is dependent on the muonic production scheme. Interestingly, the similarity in concentrations from bottom to top pleads for quite low production at depth. Our data finally indicates a quick infilling between 12.5 and 10 Ma BP accounting for ˜100 m of deposition (minimum sedimentation rate of 40 m/Ma).

A test of safety, violence prevention, and civility climate domain-specific relationships with relevant workplace hazards.

PubMed

Gazica, Michele W; Spector, Paul E

2016-01-01

Safety climate, violence prevention climate, and civility climate were independently developed and linked to domain-specific workplace hazards, although all three were designed to promote the physical and psychological safety of workers. To test domain specificity between conceptually related workplace climates and relevant workplace hazards. Data were collected from 368 persons employed in various industries and descriptive statistics were calculated for all study variables. Correlational and relative weights analyses were used to test for domain specificity. The three climate domains were similarly predictive of most workplace hazards, regardless of domain specificity. This study suggests that the three climate domains share a common higher order construct that may predict relevant workplace hazards better than any of the scales alone.

Bayesian estimation of a source term of radiation release with approximately known nuclide ratios

NASA Astrophysics Data System (ADS)

Tichý, Ondřej; Šmídl, Václav; Hofman, Radek

2016-04-01

We are concerned with estimation of a source term in case of an accidental release from a known location, e.g. a power plant. Usually, the source term of an accidental release of radiation comprises of a mixture of nuclide. The gamma dose rate measurements do not provide a direct information on the source term composition. However, physical properties of respective nuclide (deposition properties, decay half-life) can be used when uncertain information on nuclide ratios is available, e.g. from known reactor inventory. The proposed method is based on linear inverse model where the observation vector y arise as a linear combination y = Mx of a source-receptor-sensitivity (SRS) matrix M and the source term x. The task is to estimate the unknown source term x. The problem is ill-conditioned and further regularization is needed to obtain a reasonable solution. In this contribution, we assume that nuclide ratios of the release is known with some degree of uncertainty. This knowledge is used to form the prior covariance matrix of the source term x. Due to uncertainty in the ratios the diagonal elements of the covariance matrix are considered to be unknown. Positivity of the source term estimate is guaranteed by using multivariate truncated Gaussian distribution. Following Bayesian approach, we estimate all parameters of the model from the data so that y, M, and known ratios are the only inputs of the method. Since the inference of the model is intractable, we follow the Variational Bayes method yielding an iterative algorithm for estimation of all model parameters. Performance of the method is studied on simulated 6 hour power plant release where 3 nuclide are released and 2 nuclide ratios are approximately known. The comparison with method with unknown nuclide ratios will be given to prove the usefulness of the proposed approach. This research is supported by EEA/Norwegian Financial Mechanism under project MSMT-28477/2014 Source-Term Determination of Radionuclide Releases

A test of safety, violence prevention, and civility climate domain-specific relationships with relevant workplace hazards

PubMed Central

Spector, Paul E.

2016-01-01

Background Safety climate, violence prevention climate, and civility climate were independently developed and linked to domain-specific workplace hazards, although all three were designed to promote the physical and psychological safety of workers. Purpose To test domain specificity between conceptually related workplace climates and relevant workplace hazards. Methods Data were collected from 368 persons employed in various industries and descriptive statistics were calculated for all study variables. Correlational and relative weights analyses were used to test for domain specificity. Results The three climate domains were similarly predictive of most workplace hazards, regardless of domain specificity. Discussion This study suggests that the three climate domains share a common higher order construct that may predict relevant workplace hazards better than any of the scales alone. PMID:27110930

Effects of bulk composition on production rates of cosmogenic nuclides in meteorites

NASA Technical Reports Server (NTRS)

Masarik, Jozef; Reedy, Robert C.

1993-01-01

The bulk chemical composition of meteorites has been suggested as a main factor influencing the production of cosmogenic nuclides. Numerical simulations with Los Alamos Monte Carlo production and transport codes were done for Ne-21/Ne-22 ratios and Ar-38 production rates in meteorites with a wide range of compositions. The calculations show that an enhanced flux of low-energy secondary particles in metal-rich phases is the essential key for the explanation of experimentally observed differences in nuclide production processes in various meteorite classes.

Reprocessing system with nuclide separation based on chromatography in hydrochloric acid solution

DOE Office of Scientific and Technical Information (OSTI.GOV)

Suzuki, Tatsuya; Tachibana, Yu; Koyama, Shi-ichi

2013-07-01

We have proposed the reprocessing system with nuclide separation processes based on the chromatographic technique in the hydrochloric acid solution system. Our proposed system consists of the dissolution process, the reprocessing process, the minor actinide separation process, and nuclide separation processes. In the reprocessing and separation processes, the pyridine resin is used as a main separation media. It was confirmed that the dissolution in the hydrochloric acid solution is easily achieved by the plasma voloxidation and by the addition of oxygen peroxide into the hydrochloric acid solution.

Bridging the timescales between thermochronological and cosmogenic nuclide data

NASA Astrophysics Data System (ADS)

Glotzbach, Christoph

2015-04-01

Reconstructing the evolution of Earth's landscape is a key to understand its future evolution and to identify the driving forces that shape Earth's surface. Cosmogenic nuclide and thermochronological methods are routinely used to quantify Earth surface processes over 102-104 yr and 106-107 yr, respectively (e.g. Lal 1991; Reiners and Ehlers 2005; von Blanckenburg 2006). A comparison of the rates of surface processes derived from these methods is, however, hampered by the large difference in their timescales. For instance, a constant erosion rate of 0.1 mm/yr yield an apatite (U-Th)/He age of ~24 Ma and a 10Be age of ~6 ka, respectively. Analytical methods that bridge this time gap are on the way, but are not yet fully established (e.g. Herman et al. 2010). A ready to use alternative are river profiles, which record the regional uplift history over 102-107 yr (e.g. Pritchard et al. 2009). Changes in uplift are retained in knickzones that propagate with a distinct velocity upstream, and therefore the time of an uplift event can be estimated. Here I present an integrative inverse modelling approach to simultaneously reconstruct river profiles, model thermochronological and cosmogenic nuclide data and to derive robust information about landscape evolution over thousands to millions of years. An efficient inversion routine is used to solve the forward problem and find the best uplift history and erosional parameters that reproduce the observed data. I test the performance of the algorithm by inverting a synthetic dataset and a dataset from the Sila massif (Italy). Results show that even complicated uplift histories can be reliably retrieved by the combined interpretation of river profiles, thermochronological and cosmogenic nuclide data. References Gallagher, K., Brown, R. & Johnson, C. (1998): Fission track analysis and its applications to geological problems. - Annu. Rev. Earth Planet., 26: 519-572. Herman, F., Rhodes, E.J., Braun, J. & Heiniger, L. (2010): Uniform

Radio-nuclide mixture identification using medium energy resolution detectors

DOEpatents

Nelson, Karl Einar

2013-09-17

According to one embodiment, a method for identifying radio-nuclides includes receiving spectral data, extracting a feature set from the spectral data comparable to a plurality of templates in a template library, and using a branch and bound method to determine a probable template match based on the feature set and templates in the template library. In another embodiment, a device for identifying unknown radio-nuclides includes a processor, a multi-channel analyzer, and a memory operatively coupled to the processor, the memory having computer readable code stored thereon. The computer readable code is configured, when executed by the processor, to receive spectral data, to extract a feature set from the spectral data comparable to a plurality of templates in a template library, and to use a branch and bound method to determine a probable template match based on the feature set and templates in the template library.

Notre Dame Nuclear Database: A New Chart of Nuclides

NASA Astrophysics Data System (ADS)

Lee, Kevin; Khouw, Timothy; Fasano, Patrick; Mumpower, Matthew; Aprahamian, Ani

2014-09-01

Nuclear data is critical to research fields from medicine to astrophysics. We are creating a database, the Notre Dame Nuclear Database, which can store theoretical and experimental datasets. We place emphasis on storing metadata and user interaction with the database. Users are able to search in addition to the specific nuclear datum, the author(s), the facility where the measurements were made, the institution of the facility, and device or method/technique used. We also allow users to interact with the database by providing online search, an interactive nuclide chart, and a command line interface. The nuclide chart is a more descriptive version of the periodic table that can be used to visualize nuclear properties such as half-lives and mass. We achieve this by using D3 (Data Driven Documents), HTML, and CSS3 to plot the nuclides and color them accordingly. Search capabilities can be applied dynamically to the chart by using Python to communicate with MySQL, allowing for customization. Users can save the customized chart they create to any image format. These features provide a unique approach for researchers to interface with nuclear data. We report on the current progress of this project and will present a working demo that highlights each aspect of the aforementioned features. This is the first time that all available technologies are put to use to make nuclear data more accessible than ever before in a manner that is much easier and fully detailed. This is a first and we will make it available as open source ware.

Development of Advanced Nuclide Separation and Recovery Methods using Ion-Exchanhge Techniques in Nuclear Backend

NASA Astrophysics Data System (ADS)

Miura, Hitoshi

The development of compact separation and recovery methods using selective ion-exchange techniques is very important for the reprocessing and high-level liquid wastes (HLLWs) treatment in the nuclear backend field. The selective nuclide separation techniques are effective for the volume reduction of wastes and the utilization of valuable nuclides, and expected for the construction of advanced nuclear fuel cycle system and the rationalization of waste treatment. In order to accomplish the selective nuclide separation, the design and synthesis of novel adsorbents are essential for the development of compact and precise separation processes. The present paper deals with the preparation of highly functional and selective hybrid microcapsules enclosing nano-adsorbents in the alginate gel polymer matrices by sol-gel methods, their characterization and the clarification of selective adsorption properties by batch and column methods. The selective separation of Cs, Pd and Re in real HLLW was further accomplished by using novel microcapsules, and an advanced nuclide separation system was proposed by the combination of selective processes using microcapsules.

ICoN, the Interactive Chart of Nuclides

NASA Astrophysics Data System (ADS)

Lee, Kevin; Mumpower, Matthew; Aprahamian, Ani

2015-10-01

Nuclear data is critical to research fields from medicine to astrophysics. The chart of nuclides is a more descriptive version of the periodic table that can be used to visualize nuclear properties such as half-lives and mass. We have created ICoN (simply short for Interactive Chart of Nuclides), an API which can be used to visualize theoretical and experimental datasets. This visualization is achieved by using D3 (Data Driven Documents), HTML, and CSS3 to plot the elements and color them accordingly. ICoN features many customization options that users can access that are dynamically applied to the chart without reloading the page. Users can save the customized chart they create to various formats. We have constructed these features in order to provide a unique approach for researchers to interface with nuclear data. ICoN can also be used on all electronic devices without loss of support. We report on the current progress of this project and will present a working demo that highlights each aspect of the aforementioned features. This is the first time that all available technologies are put to use to make nuclear data more accessible than ever before. This is a first and we will make it available as open source ware.

Sensitivity Analysis of Nuclide Importance to One-Group Neutron Cross Sections

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sekimoto, Hiroshi; Nemoto, Atsushi; Yoshimura, Yoshikane

The importance of nuclides is useful when investigating nuclide characteristics in a given neutron spectrum. However, it is derived using one-group microscopic cross sections, which may contain large errors or uncertainties. The sensitivity coefficient shows the effect of these errors or uncertainties on the importance.The equations for calculating sensitivity coefficients of importance to one-group nuclear constants are derived using the perturbation method. Numerical values are also evaluated for some important cases for fast and thermal reactor systems.Many characteristics of the sensitivity coefficients are derived from the derived equations and numerical results. The matrix of sensitivity coefficients seems diagonally dominant. However,more » it is not always satisfied in a detailed structure. The detailed structure of the matrix and the characteristics of coefficients are given.By using the obtained sensitivity coefficients, some demonstration calculations have been performed. The effects of error and uncertainty of nuclear data and of the change of one-group cross-section input caused by fuel design changes through the neutron spectrum are investigated. These calculations show that the sensitivity coefficient is useful when evaluating error or uncertainty of nuclide importance caused by the cross-section data error or uncertainty and when checking effectiveness of fuel cell or core design change for improving neutron economy.« less

Cosmogenic nuclides in the Martian surface: Constraints for sample recovery and transport

NASA Technical Reports Server (NTRS)

Englert, Peter A. J.

1988-01-01

Stable and radioactive cosmogenic nuclides and radiation damage effects such as cosmic ray tracks can provide information on the surface history of Mars. A recent overview on developments in cosmogenic nuclide research for historical studies of predominantly extraterrestrial materials was published previously. The information content of cosmogenic nuclides and radiation damage effects produced in the Martian surface is based on the different ways of interaction of the primary galactic and solar cosmic radiation (GCR, SCR) and the secondary particle cascade. Generally the kind and extent of interactions as seen in the products depend on the following factors: (1) composition, energy and intensity of the primary SCR and GCR; (2) composition, energy and intensity of the GCR-induced cascade of secondary particles; (3) the target geometry, i.e., the spatial parameters of Martian surface features with respect to the primary radiation source; (4) the target chemistry, i.e., the chemical composition of the Martian surface at the sampling location down to the minor element level or lower; and (5) duration of the exposure. These factors are not independent of each other and have a major influence on sample taking strategies and techniques.

Inventory simulation tools: Separating nuclide contributions to radiological quantities

NASA Astrophysics Data System (ADS)

Gilbert, Mark R.; Fleming, Michael; Sublet, Jean-Christophe

2017-09-01

The activation response of a material is a primary factor considered when evaluating its suitability for a nuclear application. Various radiological quantities, such as total (becquerel) activity, decay heat, and γ dose, can be readily predicted via inventory simulations, which numerically evolve in time the composition of a material under exposure to neutron irradiation. However, the resulting data sets can be very complex, often necessarily resulting in an over-simplification of the results - most commonly by just considering total response metrics. A number of different techniques for disseminating more completely the vast amount of data output from, in particular, the FISPACT-II inventory code system, including importance diagrams, nuclide maps, and primary knock-on atom (PKA) spectra, have been developed and used in scoping studies to produce database reports for the periodic table of elements. This paper introduces the latest addition to this arsenal - standardised and automated plotting of the time evolution in a radiological quantity for a given material separated by contributions from dominant radionuclides. Examples for relevant materials under predicted fusion reactor conditions, and for bench-marking studies against decay-heat measurements, demonstrate the usefulness and power of these radionuclide-separated activation plots. Note to the reader: the pdf file has been changed on September 22, 2017.

Forbush decreases geomagnetic and atmospheric effects cosmogenic nuclides

NASA Technical Reports Server (NTRS)

Flueckiger, E. O.

1986-01-01

An overview and synthesis is given of recent developments that have occurred in the areas of Forbush decreases, geomagnetic and atmospheric effects, and cosmogenic nuclides. Experimental evidence has been found for substantial differences in the effects of the various types of interplanetary perturbations on cosmic rays, and for a dependence of these effects on the three-dimensional configuration of the interplanetary medium. In order to fully understand and to be able to simulate the solar cosmic ray particle access to the polar regions of the earth we need accurate models of the magnetospheric magnetic field. These models must include all major magnetospheric current systems (in particular the field aligned currents), and they should represent magnetically quiet time periods as well as different levels of geomagnetic activity. In the evolution of magnetospheric magnetic field models, cosmic ray and magnetospheric physicists should work closely together since cosmic ray measurements are a powerful additional tool in the study of the perturbed magnetosphere. In the field of cosmogenic nuclides, finally, exciting new results and developments follow in rapid succession. Thanks to new techniques and new isotopes the analysis of cosmic ray history has entered into a new dimension.

Nonclinical safety of mavrilimumab, an anti-GMCSF receptor alpha monoclonal antibody, in cynomolgus monkeys: Relevance for human safety

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ryan, Patricia C., E-mail: ryanp@medimmune.com; Sleeman, Matthew A.; Rebelatto, Marlon

Mavrilimumab (CAM-3001) is an investigational human IgG4 monoclonal antibody (MAb) targeting GM-CSF receptor alpha which is currently being developed for the treatment of RA. GM-CSF plays a central role in the pathogenesis of rheumatoid arthritis (RA) through the activation, differentiation, and survival of macrophages and neutrophils. To support clinical development, the nonclinical safety of mavrilimumab was evaluated in several studies with cynomolgus monkeys as the pharmacologically relevant species. Comprehensive toxicity parameters were assessed in each study, and treatment duration ranged from 4 to 26 weeks. Mavrilimumab has an acceptable safety profile in monkeys with no changes in any parameters othermore » than microscopic findings in lung. In several studies, minimal accumulation of foamy alveolar macrophages was observed. This finding was only seen in studies of at least 11 weeks duration, was reversible following a dose-free recovery period and was considered non-adverse. At higher dose levels (≥ 30 mg/kg/week), in a 26-week repeat-IV dose study, the presence of lung foreign material, cholesterol clefts, and granulomatous inflammation was also observed in a few animals and was considered adverse. The dose- and time-related accumulation of foamy macrophages in lung following exposure to mavrilimumab observed in several NHP studies was expected based upon the known role of GM-CSFRα signaling in the function of alveolar macrophages. Overall, a clean no-observed-adverse-effect-level (NOAEL) without any effects in lung was established and provided adequate clinical safety margins. In clinical studies in RA patients, mavrilimumab has demonstrated good clinical activity with adequate safety to support further clinical development. A Phase 2b study of mavrilimumab in subjects with RA is in progress. - Highlights: • Mavrilimumab is a MAB targeting GM-CSFRα being developed for RA therapy. • Mavrilimumab has an acceptable safety profile in cynomolgus

The exposure history of Jilin and production rates of cosmogenic nuclides

NASA Technical Reports Server (NTRS)

Heusser, G.

1986-01-01

Jilin, the largest known story meteorite, is a very suitable object for studying the systematics of cosmic ray produced nuclides in stony meteorites. Its well established two stage exposure history even permits to gain information about two different irradiation geometries (2pi and 4pi). All stable and long-lived cosmogenic nuclides measured in Jilin so far correlate well with each other. An example is shown where the Al-26 activities are plotted vs. the spallogenic Ne-21 concentration. These records of cosmic-ray interaction in Jilin can be used both to determine the history of the target and to study the nature of production rate profiles. This is unavoidably a bootstrap process, involving studying one with assumption about the other. Production rate equations are presented and discussed.

The behavior of U- and Th-series nuclides in the estuarine environment

USGS Publications Warehouse

Swarzenski, P.W.; Porcelli, D.; Andersson, P.S.; Smoak, J.M.

2003-01-01

Rivers carry the products of continental weathering, and continuously supply the oceans with a broad range of chemical constituents. This erosional signature is, however, uniquely moderated by biogeochemical processing within estuaries. Estuaries are commonly described as complex filters at land-sea margins, where significant transformations can occur due to strong physico-chemical gradients. These changes differ for different classes of elements, and can vary widely depending on the geographic location. U- and Th-series nuclides include a range of elements with vastly different characteristics and behaviors within such environments, and the isotopic systematics provide methods for investigating the transport of these nuclides and other analog species across estuaries and into the coastal ocean.

Efficacy and safety of a clinically relevant foamy vector design in human hematopoietic repopulating cells.

PubMed

Everson, Elizabeth M; Hocum, Jonah D; Trobridge, Grant D

2018-06-23

Previous studies have shown that foamy viral (FV) vectors are a promising alternative to gammaretroviral and lentiviral vectors and insulators can improve FV vector safety. However, in a previous analysis of insulator effects on FV vector safety, strong viral promoters were used to elicit genotoxic events. Here we developed and analyzed the efficacy and safety of a high-titer, clinically relevant FV vector driven by the housekeeping promoter elongation factor-1α and insulated with an enhancer blocking A1 insulator (FV-EGW-A1). Human CD34 + cord blood cells were exposed to an enhanced green fluorescent protein expressing vector, FV-EGW-A1, at a multiplicity of infection of 10 and then maintained in vitro or transplanted into immunodeficient mice. Flow cytometry was used to measure engraftment and marking in vivo. FV vector integration sites were analyzed to assess safety. FV-EGW-A1 resulted in high-marking, multi-lineage engraftment of human repopulating cells with no evidence of silencing. Engraftment was highly polyclonal with no clonal dominance and a promising safety profile based on integration site analysis. An FV vector with an elongation factor-1α promoter and an A1 insulator is a promising vector design for use in the clinic. This article is protected by copyright. All rights reserved.

A review of models relevant to road safety.

PubMed

Hughes, B P; Newstead, S; Anund, A; Shu, C C; Falkmer, T

2015-01-01

It is estimated that more than 1.2 million people die worldwide as a result of road traffic crashes and some 50 million are injured per annum. At present some Western countries' road safety strategies and countermeasures claim to have developed into 'Safe Systems' models to address the effects of road related crashes. Well-constructed models encourage effective strategies to improve road safety. This review aimed to identify and summarise concise descriptions, or 'models' of safety. The review covers information from a wide variety of fields and contexts including transport, occupational safety, food industry, education, construction and health. The information from 2620 candidate references were selected and summarised in 121 examples of different types of model and contents. The language of safety models and systems was found to be inconsistent. Each model provided additional information regarding style, purpose, complexity and diversity. In total, seven types of models were identified. The categorisation of models was done on a high level with a variation of details in each group and without a complete, simple and rational description. The models identified in this review are likely to be adaptable to road safety and some of them have previously been used. None of systems theory, safety management systems, the risk management approach, or safety culture was commonly or thoroughly applied to road safety. It is concluded that these approaches have the potential to reduce road trauma. Copyright © 2014 Elsevier Ltd. All rights reserved.

[Radioactive nuclides in the marine environment--distribution and behaviour of 95Zr, 95Nb originated from fallout].

PubMed

Yamato, A; Miyagawa, N; Miyanaga, N

1984-07-01

To investigate behaviour of 95Zr, 95Nb in the marine environment, various samples have been collected and measured by means of Ge(Li) gamma-ray spectrometry and/or radiochemical analysis during a period from 1974 to 1982 at coastal area of Tokai-mura, Ibaraki prefecture. Concentration of the nuclides in seaweeds increased remarkably after atmospheric nuclear detonation by P.R. of China, and the activity ratio between the nuclides changed by time was not fit well by the transient decay equation. Concentration variation in sea water was smaller than that in sea weeds, and the minimum change in sea sediment. Increase of concentration in these environmental samples was observed in chronological order of sea water, sea weeds then sediment after detonations, suggesting that the uptake of the nuclides by these sea weeds from sea water is faster than that via root. Observed concentration factors on the nuclides by sea weeds were calculated from the observed concentrations in sea water and sea weeds. Maximum values on 95Zr and 95Nb were 2110, 2150, respectively for Ecklonia cava and Eisenia bicyclis.

In-situ measurements of U-series nuclides by electron microprobe on zircons and monazites from Gandak river sediments

NASA Astrophysics Data System (ADS)

Bosia, C.; Deloule, E.; France-Lanord, C.; Chabaux, F.

2015-12-01

Determination of sediment transfer time during transport in the alluvial plains is a critical issue to correctly understand the relationship between climate, tectonics and Earth surface evolution. The residence time of river sediments may be constrained by analyzing the U series nuclides fractionations (e.g. [1] and [2]), which are created during water rock interactions by the ejection of the daughter nuclides of the grain (α-recoil) and the preferential mobilization of nuclides in decay damaged crystal structure. However, recent studies on sediments from the Gandak river, one of the main Ganga tributary, highlighted the difficulties to obtain reproducible data on bulk sediments, due to the nuggets distribution of U-Th enriched minor minerals in the samples (Bosia et al., unpublished data). We therefore decided to analyze the U and Th isotopic systematic at a grain-scale for Himalayan sediments from the Gandak river. This has been tested by performing in situ depth profiles of 238U-234U-230Th and 232Th on zircons and monazites (50-250 μm) by Secondary Ion Mass Spectrometry (SIMS) at the CRPG, Nancy, France. The first results point the occurrence of 238U-234U-230Th disequilibria in the outermost parts of both monazite and zircon minerals with a return to the equilibrium state in the core of the grains. The relative U and Th enrichment is however slightly different depending on considered minerals, suggesting possible adsorption processes of 230-Th. Coupled to a simple model of U and Th mobility during water-mineral interactions, these data should help to constrain the origin of 238U-234U-230Th disequilibria in these minerals. Moreover, the results of the study should be relevant to discuss the potential of this approach to constrain the residence time of zircons and monazites in the Gandak alluvial plain. [1] Chabaux et al., 2012, C. R. Geoscience, 344 (11-12): 688-703; [2] Granet et al., 2007, Earth and Planet. Sci. Lett., 261 (3-4): 389-406.

Progress on multi-nuclide AMS of JAEA-AMS-TONO

NASA Astrophysics Data System (ADS)

Saito-Kokubu, Yoko; Matsubara, Akihiro; Miyake, Masayasu; Nishizawa, Akimitsu; Ohwaki, Yoshio; Nishio, Tomohiro; Sanada, Katsuki; Hanaki, Tatsumi

2015-10-01

The JAEA-AMS-TONO (Japan Atomic Energy Agency's Accelerator Mass Spectrometer established at the Tono Geoscience Center) facility has been used for the dating of geological samples. The AMS system is versatile, based on a 5 MV tandem Pelletron-type accelerator. Since its establishment in 1997, the AMS system has been used for measurement of carbon-14 (14C) mainly for 14C dating studies in neotectonics and hydrogeology, in support of JAEA's research on geosphere stability applicable to the long-term isolation of high-level radioactive waste. Results of the measurement of 14C in soils and plants has been applied to the dating of fault activity and volcanism. Development of beryllium-10 (10Be) and aluminum-26 (26Al) AMS systems are now underway to enhance the capability of the multi-nuclide AMS in studies of dating by cosmogenic nuclides. The 10Be-AMS system has already been used for routine measurements in applied studies and improvements of the measurement technique have been made. Now we plan to fine tune the system and perform test measurements to develop the 26Al-AMS system.

Simulations of Terrestrial in-situ Cosmogenic-Nuclide Production

NASA Technical Reports Server (NTRS)

Reedy, R. C.; Nishiizumi, K.; Lal, D.; Arnold, J. R.; Englert, P. A. J.; Klein, J.; Middleton, R.; Jull, A. J. T.; Donahue, D. J.

1994-01-01

Targets of silicon and silicon dioxide were irradiated with spallation neutrons to simulate the production of long-lived radionuclides in the surface of the Earth. Gamma-ray spectroscopy was used to measure Be-7 and Na-22, and accelerator mass spectrometry was used to measure Be-10, C-14, and Al-26. The measured ratios of these nuclides are compared with calculated ratios and with ratios from other simulations and agree well with ratios inferred from terrestrial samples.

Role of Core-collapse Supernovae in Explaining Solar System Abundances of p Nuclides

NASA Astrophysics Data System (ADS)

Travaglio, C.; Rauscher, T.; Heger, A.; Pignatari, M.; West, C.

2018-02-01

The production of the heavy stable proton-rich isotopes between 74Se and 196Hg—the p nuclides—is due to the contribution from different nucleosynthesis processes, activated in different types of stars. Whereas these processes have been subject to various studies, their relative contributions to Galactic chemical evolution (GCE) are still a matter of debate. Here we investigate for the first time the nucleosynthesis of p nuclides in GCE by including metallicity and progenitor mass-dependent yields of core-collapse supernovae (ccSNe) into a chemical evolution model. We used a grid of metallicities and progenitor masses from two different sets of stellar yields and followed the contribution of ccSNe to the Galactic abundances as a function of time. In combination with previous studies on p-nucleus production in thermonuclear supernovae (SNIa), and using the same GCE description, this allows us to compare the respective roles of SNeIa and ccSNe in the production of p-nuclei in the Galaxy. The γ process in ccSN is very efficient for a wide range of progenitor masses (13 M ⊙–25 M ⊙) at solar metallicity. Since it is a secondary process with its efficiency depending on the initial abundance of heavy elements, its contribution is strongly reduced below solar metallicity. This makes it challenging to explain the inventory of the p nuclides in the solar system by the contribution from ccSNe alone. In particular, we find that ccSNe contribute less than 10% of the solar p nuclide abundances, with only a few exceptions. Due to the uncertain contribution from other nucleosynthesis sites in ccSNe, such as neutrino winds or α-rich freeze out, we conclude that the light p-nuclides 74Se, 78Kr, 84Sr, and 92Mo may either still be completely or only partially produced in ccSNe. The γ-process accounts for up to twice the relative solar abundances for 74Se in one set of stellar models and 196Hg in the other set. The solar abundance of the heaviest p nucleus 196Hg is

Apparatus and method for quantitatively evaluating total fissile and total fertile nuclide content in samples

DOEpatents

Caldwell, John T.; Kunz, Walter E.; Cates, Michael R.; Franks, Larry A.

1985-01-01

Simultaneous photon and neutron interrogation of samples for the quantitative determination of total fissile nuclide and total fertile nuclide material present is made possible by the use of an electron accelerator. Prompt and delayed neutrons produced from resulting induced fissions are counted using a single detection system and allow the resolution of the contributions from each interrogating flux leading in turn to the quantitative determination sought. Detection limits for .sup.239 Pu are estimated to be about 3 mg using prompt fission neutrons and about 6 mg using delayed neutrons.

Assessment of safety-relevant aspects of Kraftwerk Union's 200-MW(thermal) nuclear district heating plant concept

DOE Office of Scientific and Technical Information (OSTI.GOV)

Erlenwein, P.; Frisch, W.; Kafka, P.

Nuclear reactors of 200- to 400-MW(thermal) power for district heating are the subject of increasing interest, and several specific designs are under discussion today. In the Federal Republic of Germany (FRG), the Kraftwerk Union AG has presented a 200-MW(thermal) heating reactor concept. The main safety issues of this design are assessed. In this design, the primary system is fully integrated into the reactor pressure vessel (RPV), which is tightly enclosed by the containment. The low process parameters like pressure, temperature, and power density and the high ratio of coolant volume to thermal power allow the design of simple safety features.more » This is supported by the preference of passive over active components. A special feature is a newly designed hydraulic control and rod drive mechanism, which is also integrated into the RPV. Within the safety assessment an overview of the relevant FRG safety rules and guidelines, developed mainly for large, electricity-generating power plants, is given. Included is a discussion of the extent to which these licensing rules can be applied to the concept of heating reactors.« less

Cosmogenic nuclides in football-sized rocks.

NASA Technical Reports Server (NTRS)

Wahlen, M.; Honda, M.; Imamura, M.; Fruchter, J. S.; Finkel, R. C.; Kohl, C. P.; Arnold, J. R.; Reedy, R. C.

1972-01-01

The activity of long- and short-lived isotopes in a series of samples from a vertical column through the center of rock 14321 was measured. Rock 14321 is a 9 kg fragmental rock whose orientation was photographically documented on the lunar surface. Also investigated was a sample from the lower portion of rock 14310, where, in order to study target effects, two different density fractions (mineral separates) were analyzed. A few nuclides in a sample from the comprehensive fines 14259 were measured. This material has been collected largely from the top centimeter of the lunar soil. The study of the deep samples of 14321 and 14310 provided values for the activity of isotopes at points where only effects produced by galactic cosmic rays are significant.

VRF ("Visual RobFit") — nuclear spectral analysis with non-linear full-spectrum nuclide shape fitting

NASA Astrophysics Data System (ADS)

Lasche, George; Coldwell, Robert; Metzger, Robert

2017-09-01

A new application (known as "VRF", or "Visual RobFit") for analysis of high-resolution gamma-ray spectra has been developed using non-linear fitting techniques to fit full-spectrum nuclide shapes. In contrast to conventional methods based on the results of an initial peak-search, the VRF analysis method forms, at each of many automated iterations, a spectrum-wide shape for each nuclide and, also at each iteration, it adjusts the activities of each nuclide, as well as user-enabled parameters of energy calibration, attenuation by up to three intervening or self-absorbing materials, peak width as a function of energy, full-energy peak efficiency, and coincidence summing until no better fit to the data can be obtained. This approach, which employs a new and significantly advanced underlying fitting engine especially adapted to nuclear spectra, allows identification of minor peaks that are masked by larger, overlapping peaks that would not otherwise be possible. The application and method are briefly described and two examples are presented.

Fukushima-derived fission nuclides monitored around Taiwan: Free tropospheric versus boundary layer transport

NASA Astrophysics Data System (ADS)

Huh, Chih-An; Hsu, Shih-Chieh; Lin, Chuan-Yao

2012-02-01

The 2011 Fukushima nuclear accident in Japan was the worst nuclear disaster following the 1986 Chernobyl accident. Fission products (nuclides) released from the Fukushima plant site since March 12, 2011 had been detected around the northern hemisphere in about two weeks and also in the southern hemisphere about one month later. We report here detailed time series of radioiodine and radiocesium isotopes monitored in a regional network around Taiwan, including one high-mountain and three ground-level sites. Our results show several pulses of emission from a sequence of accidents in the Fukushima facility, with the more volatile 131I released preferentially over 134Cs and 137Cs at the beginning. In the middle of the time series, there was a pronounced peak of radiocesium observed in northern Taiwan, with activity concentrations of 134Cs and 137Cs far exceeding that of 131I during that episode. From the first arrival time of these fission nuclides and their spatial and temporal variations at our sampling sites and elsewhere, we suggest that Fukushima-derived radioactive nuclides were transported to Taiwan and its vicinity via two pathways at different altitudes. One was transported in the free troposphere by the prevailing westerly winds around the globe; the other was transported in the planetary boundary layer by the northeast monsoon wind directly toward Taiwan.

Beta-decay spectroscopy relevant to the r-process nucleosynthesis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nishimura, Shunji; Collaboration: RIBF Decay Collaboration

2012-11-12

A scientific program of beta-decay spectroscopy relevant to r-process nucleosynthesis has been started using high intensity U-beam at the RIBF. The first results of {beta}-decay half-lives of very neutron-rich Kr to Tc nuclides, all of which lie close to the r-process path, suggest a systematic enhancement of the the {beta}-decay rates of the Zr and Nb isotopes around A110 with respect to the predictions of the deformed quasiparticle-random-phase-approximation model (FRDM + QRPA). An impact of the results on the astrophysical r-process is discussed together with the future perspective of the {beta}-decay spectroscopy with the EURICA.

Including Deposition Rate in Models of Cosmogenic Nuclide Accumulation in Fluvial Sediments to Improve Terrace Abandonment Ages

NASA Astrophysics Data System (ADS)

Norton, K. P.; Wang, N.; Van Dissen, R. J.; Little, T.

2017-12-01

Fluvial sediments are archives of the erosional, transport, and depositional processes occurring in the catchment. Terraces become robust markers for geomorphic analysis if their time of abandonment can be determined. Methods such as OSL can determine burial ages for fine grained sediments within the terrace fill but may not be directly related to the terrace abandonment age. Cosmogenic nuclides can be used to determine exposure ages for geologically young terraces but the surface being dated may have been subsequently eroded and the material itself may have been deposited with an inherited nuclide concentration. To deal with this problem, many researchers collect multiple samples with depth to model the depth-dependent nuclide concentration to help constrain inheritance and post-depositional erosion. It is often, however, assumed that the entire sediment pile accumulated instantaneously. In this submission, we present the results of a depth profile model that incorporates sediment accumulation rate to improve terrace age estimates. We test this model on fault-offset river terraces near Kaikoura, New Zealand. We measured depth profiles of OSL ages and cosmogenic nuclide concentrations of two late Quaternary terraces that are offset by up to 800 m across the Kekerengu Fault. OSL ages and dated tephras in the overlying loess provide minimum age constraints for both terraces while OSL ages of fine-grained sediments within the fill provide depositional ages. The predicted sedimentation rates for the terraces are as high as 0.5m/yr, consistent with geologically instantaneous deposition. Modelled abandonment ages from cosmogenic nuclides for the terraces are consistent with OSL and tephra constraints at 9.7 +/- 3.8 ka and 30.4 +/- 2.1 ka, respectively. These terrace abandonment ages yield dextral slip rates of 18.5-20.5 mm/yr and 25-28 mm/yr, respectively, consistent with the rapid slip rate on the adjacent Hope Fault.

Cosmogenic nuclide production rates as a function of latitude and altitude calculated via a physics based model and excitation functions

NASA Astrophysics Data System (ADS)

Argento, D.; Reedy, R. C.; Stone, J. O.

2012-12-01

Cosmogenic nuclides have been used to develop a set of tools critical to the quantification of a wide range of geomorphic and climatic processes and events (Dunai 2010). Having reliable absolute measurement methods has had great impact on research constraining ice age extents as well as providing important climatic data via well constrained erosion rates, etc. Continuing to improve CN methods is critical for these sciences. While significant progress has been made in the last two decades to reduce uncertainties (Dunai 2010; Gosse & Phillips 2001), numerous aspects still need to be refined in order to achieve the analytic resolution desired by glaciologists and geomorphologists. In order to investigate the finer details of the radiation responsible for cosmogenic nuclide production, we have developed a physics based model which models the radiation cascade of primary and secondary cosmic-rays through the atmosphere. In this study, a Monte Carlo method radiation transport code, MCNPX, is used to model the galactic cosmic-ray (GCR) radiation impinging on the upper atmosphere. Beginning with a spectrum of high energy protons and alpha particles at the top of the atmosphere, the code tracks the primary and resulting secondary particles through a model of the Earth's atmosphere and into the lithosphere. Folding the neutron and proton flux results with energy dependent cross sections for nuclide production provides production rates for key cosmogenic nuclides (Argento et al. 2012, in press; Reedy 2012, in press). Our initial study for high latitude shows that nuclides scale at different rates for each nuclide (Argento 2012, in press). Furthermore, the attenuation length for each of these nuclide production rates increases with altitude, and again, they increase at different rates. This has the consequence of changing the production rate ratio as a function of altitude. The earth's geomagnetic field differentially filters low energy cosmic-rays by deflecting them away

Accelerator experiments on the contribution of secondary particles to the production of cosmogenic nuclides in meteorites

NASA Technical Reports Server (NTRS)

Dragovitsch, P.; Englert, P.

1985-01-01

Through the interaction of galactic cosmic particle radiation (GCR) a wide variety of cosmogenic nuclides is produced in meteorites. They provide historical information about the cosmic radiation and the bombarded meteorites. An important way to understand the production mechanisms of cosmogenic nuclides in meteorites is to gather information about the depth and size dependence of the build-up of Galactic Rays Cosmic-secondary particles within meteorites of different sizes and chemical compositions. Simulation experiments with meteorite models offer an alternative to direct observation providing a data basis to describe the development and action of the secondary cascade induced by the GCR in meteorites.

Apparatus and method for quantitatively evaluating total fissile and total fertile nuclide content in samples. [Patent application

DOEpatents

Caldwell, J.T.; Kunz, W.E.; Cates, M.R.; Franks, L.A.

1982-07-07

Simultaneous photon and neutron interrogation of samples for the quantitative determination of total fissile nuclide and total fertile nuclide material present is made possible by the use of an electron accelerator. Prompt and delayed neutrons produced from resulting induced fission are counted using a single detection system and allow the resolution of the contributions from each interrogating flux leading in turn to the quantitative determination sought. Detection limits for /sup 239/Pu are estimated to be about 3 mg using prompt fission neutrons and about 6 mg using delayed neutrons.

Preparation of alpha-emitting nuclides by electrodeposition

NASA Astrophysics Data System (ADS)

Lee, M. H.; Lee, C. W.

2000-06-01

A method is described for electrodepositing the alpha-emitting nuclides. To determine the optimum conditions for plating plutonium, the effects of electrolyte concentration, chelating reagent, current, pH of electrolyte and the time of plating on the electrodeposition were investigated on the base of the ammonium oxalate-ammonium sulfate electrolyte containing diethyl triamino pentaacetic acid. An optimized electrodeposition procedure for the determination of plutonium was validated by application to environmental samples. The chemical yield of the optimized method of electrodeposition step in the environmental sample was a little higher than that of Talvitie's method. The developed electrodeposition procedure in this study was applied to determine the radionuclides such as thorium, uranium and americium that the electrodeposition yields were a little higher than those of the conventional method.

Aluminum Data Measurements and Evaluation for Criticality Safety Applications

NASA Astrophysics Data System (ADS)

Leal, L. C.; Guber, K. H.; Spencer, R. R.; Derrien, H.; Wright, R. Q.

2002-12-01

The Defense Nuclear Facility Safety Board (DNFSB) Recommendation 93-2 motivated the US Department of Energy (DOE) to develop a comprehensive criticality safety program to maintain and to predict the criticality of systems throughout the DOE complex. To implement the response to the DNFSB Recommendation 93-2, a Nuclear Criticality Safety Program (NCSP) was created including the following tasks: Critical Experiments, Criticality Benchmarks, Training, Analytical Methods, and Nuclear Data. The Nuclear Data portion of the NCSP consists of a variety of differential measurements performed at the Oak Ridge Electron Linear Accelerator (ORELA) at the Oak Ridge National Laboratory (ORNL), data analysis and evaluation using the generalized least-squares fitting code SAMMY in the resolved, unresolved, and high energy ranges, and the development and benchmark testing of complete evaluations for a nuclide for inclusion into the Evaluated Nuclear Data File (ENDF/B). This paper outlines the work performed at ORNL to measure, evaluate, and test the nuclear data for aluminum for applications in criticality safety problems.

Surface Exposure Geochronology Using Cosmogenic Nuclides: Applications in Antarctic Glacial Geology

DTIC Science & Technology

1994-02-01

Department of Marine Chemistry and Geochemistry Dist Special Dean of Graduate Studies I I I SURFACE EXPOSURE GEOCHRONOLOGY USING COSMOGENIC NUCLIDES... studies of Sirius Group tills. Comparison of measured 10Be concentrations in Sirius Group deposits with those predicted with a model of the effects of...that this deposit does not, 1 as previous studies suggested, represent a single ice advance in response to lowered sea level at the last glacial

Long-term Glacial History of the West Antarctic Ice Sheet from Cosmogenic Nuclides in a Subglacial Bedrock Core

NASA Astrophysics Data System (ADS)

Spector, P. E.; Stone, J.; Hillebrand, T.; Gombiner, J. H.

2017-12-01

To investigate the response of the West Antarctic Ice Sheet (WAIS) to climatic conditions warmer than present, we are analyzing cosmogenic nuclides in a bedrock core from beneath 150 m of ice at a site near the Pirrit Hills. Our aim is to determine whether the WAIS has thinned in the past, exposing bedrock at this site, and if so, when. This will help to determine the vulnerability of the ice sheet to future warming, and identify climatic thresholds capable of inducing WAIS collapse. We selected a site where the ice-sheet surface lies at 1300 m, approximately halfway from the ice-sheet divide to the grounding line. We expect ice thickness at the site to reflect WAIS dynamics, rather than local meteorology or topography. Ice flow speeds are moderate and ice above the core site is thin enough to remain cold-based, limiting the possibility of subglacial erosion which would compromise the cosmogenic nuclide record. We targeted a subglacial ridge adjacent to an exposed granite nunatak. This lithology provides minerals suitable for analysis of multiple cosmogenic nuclides with different half-lives. Although we aimed to collect two cores from different depths to compare exposure histories, hydrofracture of the basal ice prevented us from reaching the bed at the first drill site. The second hole produced 5.5 m of discontinuous ice core above 8 m of bedrock core. Initial analyses of quartz from the bedrock show low levels of Be-10. Further analyses of Be-10, Al-26, Cl-36 and Ne-21 from the full length of the core will be required to determine whether this is because the surface has never been exposed, or because the cosmogenic nuclide profile has been truncated by glacial erosion. We will present comprehensive cosmogenic nuclide data, and discuss implications for WAIS deglaciation history, at the meeting. Supported by US National Science Foundation awards ANT-1142162 and PLR-1341728.

Nuclide Depletion Capabilities in the Shift Monte Carlo Code

DOE PAGES

Davidson, Gregory G.; Pandya, Tara M.; Johnson, Seth R.; ...

2017-12-21

A new depletion capability has been developed in the Exnihilo radiation transport code suite. This capability enables massively parallel domain-decomposed coupling between the Shift continuous-energy Monte Carlo solver and the nuclide depletion solvers in ORIGEN to perform high-performance Monte Carlo depletion calculations. This paper describes this new depletion capability and discusses its various features, including a multi-level parallel decomposition, high-order transport-depletion coupling, and energy-integrated power renormalization. Several test problems are presented to validate the new capability against other Monte Carlo depletion codes, and the parallel performance of the new capability is analyzed.

Soft-Rotator Coupled Channels Global Optical Potential for A=24-122 Mass Region Nuclides up to 200-MeV Incident Nucleon Energies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Soukhovitski, Efrem Sh.; Chiba, Satoshi; Lee, Jeong-Yeon

2005-05-24

A coupled-channels optical model with a coupling scheme based on nuclear wave functions of the soft-rotator model was applied to analyze experimental nucleon-nucleus interaction data for even-even nuclides with mass number A=24-122. We found that all the available data (total cross sections, angular distributions of elastically and inelastically scattered nucleons, and reaction cross sections) for these nuclides can be described to a good accuracy using an optical potential having smooth dependencies of potential values, radii, and diffuseness on the mass number. The individual properties of the target nuclides are accounted for by individuality of the nuclear Hamiltonian parameters, adjusted tomore » reproduce the low-lying collective level structure, Fermi energies, and deformation parameters.« less

The Chondrite Neagari: Petrography, Mineralogy, Chemical Compositions, and Cosmogenic Nuclides

NASA Astrophysics Data System (ADS)

Okada, A.; Komura, K.; Nagao, K.; Nishiizumi, K.; Miyamoto, Y.; Sakamoto, K.; Ebihara, M.; Shima, M.

1995-09-01

The Neagari meteorite fell on Feb. 18, 1995 at Neagari-machi, Nomi-gun, Ishikawa-ken, Japan (geographical coordinate: 36 degrees 26.9'N, 136 degrees 27.9'E). It was broken into several pieces when it hit a car upon falling. The largest piece weighing about 325 g and a small piece weighing 39 g were brought to the Kanazawa University for the measurements of gamma-rays emitted by cosmogenic nuclides only 2.7 days after the fall. Thereafter, the measurement was repeated several times. Other small pieces were used for petrographic, mineralogical and chemical studies. Noble gas mass spectrometry and AMS were also conducted. The Neagari meteorite shows a distinct, recrystallized structure under the microscopic observation of the thin section. Chondrules, 0.6 to 1.0 mm in diameter, are all present as relicts, buried in the well-recrystallized matrix. The chondrule-matrix boundaries are scarcely discernible in the granulated matrix. Olivine (Fa: 25.3 +/- 0.6 mole%) and orthopyroxene (Fs: 20.6 +/- 0.6 mole%) are the most abundant minerals both in matrix and in the chondrule relicts. Diopside is present as individual grains in the granular matrix. Interstitial feldspar crystal (Or(sub)6.3Ab (sub)88.0 An(sub)5.8) are common in the matrix and chondrule relicts, and often enclose minute pyroxene grains. Main opaque minerals are kamacite, taenite, troilite and chromite, and the metal phase is more abundant than the sulfide phase in the section. Both Fa and Fs values indicate that the Neagari meteorite is an L chondrite. The well-crystallized structure of the matrix, poorly defined outline of relict chondrules in the matrix, the prevalence of clear and well-developed plagioclase grains in the matrix and chondrule relicts and the absence of glass and monoclinic low-Ca pyroxene indicate the petrologic type to be 6. By the non-destructive gamma-ray measurement of the meteorite, eleven cosmogenic nuclides (^44mSc, ^52Mn, ^48V, ^51Cr, ^7Be, ^56Co, ^46Sc, ^57Co, ^54Mn, ^22Na, and ^26Al

Impact of Tumor Localization and Method of Preoperative Biopsy on Sentinel Lymph Node Mapping After Periareolar Nuclide Injection.

PubMed

Krammer, Julia; Dutschke, Anja; Kaiser, Clemens G; Schnitzer, Andreas; Gerhardt, Axel; Radosa, Julia C; Brade, Joachim; Schoenberg, Stefan O; Wasser, Klaus

2016-01-01

To evaluate whether tumor localization and method of preoperative biopsy affect sentinel lymph node (SLN) detection after periareolar nuclide injection in breast cancer patients. 767 breast cancer patients were retrospectively included. For lymphscintigraphy periareolar nuclide injection was performed and the SLN was located by gamma camera. Patient and tumor characteristics were correlated to the success rate of SLN mapping. SLN marking failed in 9/61 (14.7%) patients with prior vacuum-assisted biopsy and 80/706 (11.3%) patients with prior core needle biopsy. Individually evaluated, biopsy method (p = 0.4) and tumor localization (p = 0.9) did not significantly affect the SLN detection rate. Patients with a vacuum-assisted biopsy of a tumor in the upper outer quadrant had a higher odds ratio of failing in SLN mapping (OR 3.8, p = 0.09) compared to core needle biopsy in the same localization (OR 0.9, p = 0.5). Tumor localization and preoperative biopsy method do not significantly impact SLN mapping with periareolar nuclide injection. However, the failure risk tends to rise if vacuum-assisted biopsy of a tumor in the upper outer quadrant is performed.

Atmospheric dust contribution to budget of U-series nuclides in weathering profiles. The Mount Cameroon volcano

NASA Astrophysics Data System (ADS)

Pelt, E.; Chabaux, F. J.; Innocent, C.; Ghaleb, B.

2009-12-01

Analysis of U-series nuclides in weathering profiles is developed today for constraining time scale of soil and weathering profile formation (e.g., Chabaux et al., 2008). These studies require the understanding of U-series nuclides sources and fractionation in weathering systems. For most of these studies the impact of aeolian inputs on U-series nuclides in soils is usually neglected. Here, we propose to discuss such an assumption, i.e., to evaluate the impact of dust deposition on U-series nuclides in soils, by working on present and paleo-soils collected on the Mount Cameroon volcano. Recent Sr, Nd, Pb isotopic analyses performed on these samples have indeed documented significant inputs of Saharan dusts in these soils (Dia et al., 2006). We have therefore analyzed 238U-234U-230Th nuclides in the same samples. Comparison of U-Th isotopic data with Sr-Nd-Pb isotopic data indicates a significant impact of the dust input on the U and Th budget of the soils, around 10% for both U and Th. Using Sr-Nd-Pb isotopic data of Saharan dusts given by Dia et al. (2006) we estimate U-Th concentrations and U-Th isotope ratios of dusts compatible with U-Th data obtained on Saharan dusts collected in Barbados (Rydell H.S. and Prospero J.M., 1972). However, the variations of U/Th ratios along the weathering profiles cannot be explained by a simple mixing scenario between material from basalt and from the defined atmospheric dust pool. A secondary uranium migration associated with chemical weathering has affected the weathering profiles. Mass balance calculation suggests that U in soils from Mount Cameroon is affected at the same order of magnitude by both chemical migration and dust accretion. Nevertheless, the Mount Cameroon is a limit case were large dust inputs from continental crust of Sahara contaminate basaltic terrain from Mount Cameroon volcano. Therefore, this study suggests that in other contexts were dust inputs are lower, or the bedrocks more concentrated in U and Th

Abstracts of NASA-ASRDI publications relevant to aerospace safety research

NASA Technical Reports Server (NTRS)

Mandel, G.; Mckenna, P. J.

1973-01-01

Abstracts covering the following areas are presented: (1) oxygen technology; (2) fire safety; (3) accidents/incidents; (4) toxic spills; (5) aircraft safety; (6) structural failures; (7) nuclear systems; (8) fluid flow; and (9) zero gravity combustion.

Uncertainties in the production of p nuclides in thermonuclear supernovae determined by Monte Carlo variations

NASA Astrophysics Data System (ADS)

Nishimura, N.; Rauscher, T.; Hirschi, R.; Murphy, A. St J.; Cescutti, G.; Travaglio, C.

2018-03-01

Thermonuclear supernovae originating from the explosion of a white dwarf accreting mass from a companion star have been suggested as a site for the production of p nuclides. Such nuclei are produced during the explosion, in layers enriched with seed nuclei coming from prior strong s processing. These seeds are transformed into proton-richer isotopes mainly by photodisintegration reactions. Several thousand trajectories from a 2D explosion model were used in a Monte Carlo approach. Temperature-dependent uncertainties were assigned individually to thousands of rates varied simultaneously in post-processing in an extended nuclear reaction network. The uncertainties in the final nuclear abundances originating from uncertainties in the astrophysical reaction rates were determined. In addition to the 35 classical p nuclides, abundance uncertainties were also determined for the radioactive nuclides 92Nb, 97, 98Tc, 146Sm, and for the abundance ratios Y(92Mo)/Y(94Mo), Y(92Nb)/Y(92Mo), Y(97Tc)/Y(98Ru), Y(98Tc)/Y(98Ru), and Y(146Sm)/Y(144Sm), important for Galactic Chemical Evolution studies. Uncertainties found were generally lower than a factor of 2, although most nucleosynthesis flows mainly involve predicted rates with larger uncertainties. The main contribution to the total uncertainties comes from a group of trajectories with high peak density originating from the interior of the exploding white dwarf. The distinction between low-density and high-density trajectories allows more general conclusions to be drawn, also applicable to other simulations of white dwarf explosions.

Cross Sections of P-Induced Reactions up to 100 MeV for the Interpretation of Solar Cosmic Ray Produced Nuclides

NASA Astrophysics Data System (ADS)

Schiekel, T.; Rosel, R.; Herpers, U.; Bodemann, R.; Michel, R.; Dittrich, B.; Hofmann, H. J.; Suter, M.; Wolfli, W.; Holmqvist, B.; Conde, H.; Malmborg, P.

1992-07-01

relevant for SCR interactions with terrestrial and extraterrestrial matter, i.e., ^7Be and ^10Be from C, N, O, Mg, Al, and Si and ^22Na and ^26Al from Mg, Al, and Si, is discussed in detail. In order to investigate whether theoretical calculations can be used to supply the necessary cross sections for SCR model calcu- lations, a theoretical analysis of the experimental data is given on the basis of model calculations of equilibrium and pre-equilibrium reactions for light target elements. The new data are applied to model calculations of the production of SCR-produced nuclides in lunar surface materials and in meteorites. Acknowledgement: This work was supported by the Deutsche Forschungsgemeinschaft and by the Swiss National Science Foundation. References: (1) Michel et al. (1984) J. Geophys Res. 89, B673- B684. (2) Michel R. et al. (1985) Nucl. Phys. A441, 617-639.

Studies on cosmogenic nuclides in meteorites with regard to an application as potential depth indicators

NASA Technical Reports Server (NTRS)

Sarafin, R.; Herpers, U.; Englert, P.; Wieler, R.; Signer, P.; Bonani, G.; Hofmann, H. J.; Morenzoni, E.; Nessi, M.; Suter, M.

1986-01-01

Measurements of stable and radioactive spallation products in meteorites allow to investigate their histories, especially with respect to the exposure to galactic cosmic ray particles and the pre-atmospheric size of the object. While the concentrations of spallation products lead to the determination of exposure and terrestrial ages, production rate ratios are characteristic for the location of the sample in the meteorite. So, one of the aims of this investigation on meteorites is to obtain depth indicators from suitable pairs of cosmogenic nuclides. Because of the different depth profiles for nuclide productions it is necessary to determine the concentrations of a larger number of spallation products in aliquots of a single small sample. Such same sample measurements of Be-10 and light noble gases were performed on 15 ordinary chondrites (7 H- and 8 L-chondrites. Be-10 was determined by accelerator mass spectrometry and the noble gases were measured by static mass spectrometry. The results are summarized and discussed.

Comparing Time-Dependent Geomagnetic and Atmospheric Effects on Cosmogenic Nuclide Production Rate Scaling

NASA Astrophysics Data System (ADS)

Lifton, N. A.

2014-12-01

A recently published cosmogenic nuclide production rate scaling model based on analytical fits to Monte Carlo simulations of atmospheric cosmic ray flux spectra (both of which agree well with measured spectra) (Lifton et al., 2014, Earth Planet. Sci. Lett. 386, 149-160: termed the LSD model) provides two main advantages over previous scaling models: identification and quantification of potential sources of bias in the earlier models, and the ability to generate nuclide-specific scaling factors easily for a wide range of input parameters. The new model also provides a flexible framework for exploring the implications of advances in model inputs. In this work, the scaling implications of two recent time-dependent spherical harmonic geomagnetic models spanning the Holocene will be explored. Korte and Constable (2011, Phys. Earth Planet. Int. 188, 247-259) and Korte et al. (2011, Earth Planet. Sci. Lett. 312, 497-505) recently updated earlier spherical harmonic paleomagnetic models used by Lifton et al. (2014) with paleomagnetic measurements from sediment cores in addition to archeomagnetic and volcanic data. These updated models offer improved accuracy over the previous versions, in part to due to increased temporal and spatial data coverage. With the new models as input, trajectory-traced estimates of effective vertical cutoff rigidity (RC- the standard method for ordering cosmic ray data) yield significantly different time-integrated scaling predictions when compared to the earlier models. These results will be compared to scaling predictions using another recent time-dependent spherical harmonic model of the Holocene geomagnetic field by Pavón-Carrasco et al. (2014, Earth Planet. Sci. Lett. 388, 98-109), based solely on archeomagnetic and volcanic paleomagnetic data, but extending to 14 ka. In addition, the potential effects of time-dependent atmospheric models on LSD scaling predictions will be presented. Given the typical dominance of altitudinal over

Timing of Expansions of the Quelccaya Ice Cap, Peru, and Implications for Cosmogenic Nuclide Production Rate Calibration

NASA Astrophysics Data System (ADS)

Lowell, T. V.; Kelly, M. A.; Applegate, P. J.; Smith, C. A.; Phillips, F. M.; Hudson, A. M.

2010-12-01

We calibrate the production rate of the cosmogenic nuclide beryllium-10 (10Be) at a low-latitude, high-elevation site, using nuclide concentrations measured in moraine boulders and an independent chronology determined with bracketing radiocarbon dates. The measurement of terrestrial cosmogenic nuclide (TCN) concentrations in earth surface materials has been an important development for understanding a host of earth surface processes. Uncertainty in cosmogenic nuclide production rates has hampered application of this method. Here, we contribute to the estimation of 10Be production rates by reporting both preliminary 10Be concentrations and independent radiocarbon dates from a low latitude, high elevation site. Our study site in the southeastern Peruvian Andes (~13.9°S, 70.9°W, 4850 m asl) is centered on a moraine set, known as the Huancané II moraines, that represents a ~4 km expansion of Quelccaya Ice Cap during late glacial time. At this location, organic material situated both stratigraphically below and above moraines in two adjacent valleys provide material for radiocarbon dating. Based on geomorphic arguments, we correlate results from the two valleys. The timing of ice cap margin advance is bracketed by 13 radiocarbon ages on organic material within the outermost Huancané II moraines that range from 13.6 to 12.5 ka. Two stratigraphic sections upvalley from the moraines yield 6 radiocarbon ages from 11.3 to 12.4 ka, indicating the time of retreat . We computed the probability density function that lies between these two sets of dates, and assign an age of 12.4 ka (+/-???) for the formation of the Huancané II moraines. Calculating beryllium-10 exposure dates from the measured concentrations yield exposure dates that significantly underestimate the independently determined age of the moraine (~8-30%), if existing production rate estimates are used. We suggest that the radiocarbon age for the moraines can be used as a robust independent calibration for 10Be

Theories of risk and safety: what is their relevance to nursing?

PubMed

Cooke, Hannah

2009-03-01

The aim of this paper is to review key theories of risk and safety and their implications for nursing. The concept of of patient safety has only recently risen to prominence as an organising principle in healthcare. The paper considers the wider social context in which contemporary concepts of risk and safety have developed. In particular it looks at sociological debates about the rise of risk culture and the risk society and their influence on the patient safety movement. The paper discusses three bodies of theory which have attempted to explain the management of risk and safety in organisations: normal accident theory, high reliability theory, and grid-group cultural theory. It examine debates between these theories and their implications for healthcare. It discusses reasons for the dominance of high reliability theory in healthcare and its strengths and limitations. The paper suggest that high reliability theory has particular difficulties in explaining some aspects of organisational culture. It also suggest that the implementation of high reliability theory in healthcare has involved over reliance on numerical indicators. It suggests that patient safety could be improved by openness to a wider range of theoretical perspectives.

Transfer time and source tracing in the soil - water- -plant system deciphered by the U-and Th-series short-lived nuclides

NASA Astrophysics Data System (ADS)

Rihs, S.; Pierret, M.; Chabaux, F.

2011-12-01

Because soils form at the critical interface between the lithosphere and the atmosphere, characterization of the dynamics occurring through this compartment represents an important goal for several scientific fields and/or human activities. However, this issue remains a challenge because soils are complex systems, where a continuous evolution of minerals and organic soil constituents occurs in response to interactions with waters and vegetation. This study aims to investigate the relevance of short-lived nuclides of U- and Th-series to quantify the transfer times and scheme of radionuclides through a soil - water - plant ecosystem. Activities of (226Ra), (228Ra) and (228Th), as well as the long-lived (232Th), were measured by TIMS and gamma-spectrometry in the major compartments of a forested soil section, i.e.: solid soil fractions (exchangeable fraction, secondary phases and inherited primary minerals), waters (seepage soil waters and a spring further down the watershed) and vegetation (fine and coarse roots of beech trees, young and mature leaves). The matching of these nuclides half-live to bio-geochemical processes time-scale and the relatively good chemical analogy of radium with calcium make these isotopes especially suitable to investigate either time or mechanism of transfers within a soil-water-plant system. Indeed, the (228Ra/226Ra) isotopic ratios strongly differ in the range of samples, allowing quantifying the source and duration transfers. Analyses of the various solid soil fractions demonstrate a full redistribution of Ra isotopes between the inherited minerals and secondary soil phases. However, the transfer of these isotopes to the seepage water or to the tree roots does not follow a simple and obvious scheme. Both primary and secondary phases show to contribute to the dissolved radium. However, depending on the season, the tree leaves degradation also produces up to 70% of dissolved radium. Immobilization of a large part of this radium occurs

Technological Advances in Cardiovascular Safety Assessment Decrease Preclinical Animal Use and Improve Clinical Relevance.

PubMed

Berridge, Brian R; Schultze, A Eric; Heyen, Jon R; Searfoss, George H; Sarazan, R Dustan

2016-12-01

Cardiovascular (CV) safety liabilities are significant concerns for drug developers and preclinical animal studies are predominately where those liabilities are characterized before patient exposures. Steady progress in technology and laboratory capabilities is enabling a more refined and informative use of animals in those studies. The application of surgically implantable and telemetered instrumentation in the acute assessment of drug effects on CV function has significantly improved historical approaches that involved anesthetized or restrained animals. More chronically instrumented animals and application of common clinical imaging assessments like echocardiography and MRI extend functional and in-life structural assessments into the repeat-dose setting. A growing portfolio of circulating CV biomarkers is allowing longitudinal and repeated measures of cardiac and vascular injury and dysfunction better informing an understanding of temporal pathogenesis and allowing earlier detection of undesirable effects. In vitro modeling systems of the past were limited by their lack of biological relevance to the in vivo human condition. Advances in stem cell technology and more complex in vitro modeling platforms are quickly creating more opportunity to supplant animals in our earliest assessments for liabilities. Continuing improvement in our capabilities in both animal and nonanimal modeling should support a steady decrease in animal use for primary liability identification and optimize the translational relevance of the animal studies we continue to do. © The Author 2016. Published by Oxford University Press on behalf of the Institute for Laboratory Animal Research. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Mid-Pleistocene cosmogenic minimum-age limits for pre-Wisconsinan glacial surfaces in southwestern Minnesota and southern Baffin Island: A multiple nuclide approach

USGS Publications Warehouse

Bierman, P.R.; Marsella, K.A.; Patterson, Chris; Davis, P.T.; Caffee, M.

1999-01-01

Paired 10Be and 26Al analyses (n = 14) indicate that pre-Wisconsinan, glaciated bedrock surfaces near the northern (Baffin Island) and southern (Minnesota) paleo-margins of the Laurentide Ice Sheet have long and complex histories of cosmic-ray exposure, including significant periods of partial or complete shielding from cosmic rays. Using the ratio, 26Al/10Be, we calculate that striated outcrops of Sioux Quartzite in southwestern Minnesota (southern margin) were last overrun by ice at least 500,000 years ago. Weathered bedrock tors on the once-glaciated uplands of Baffin Island (northern margin) are eroding no faster than 1.1 m Myr-1, the equivalent of at least 450,000 years of surface and near-surface exposure. Our data demonstrate that exposure ages and erosion rates calculated from single nuclides can underestimate surface stability dramatically because any intermittent burial, and the resultant lowering of nuclide production rates and nuclide abundances, will remain undetected.

Incorporating organisational safety culture within ergonomics practice.

PubMed

Bentley, Tim; Tappin, David

2010-10-01

This paper conceptualises organisational safety culture and considers its relevance to ergonomics practice. Issues discussed in the paper include the modest contribution that ergonomists and ergonomics as a discipline have made to this burgeoning field of study and the significance of safety culture to a systems approach. The relevance of safety culture to ergonomics work with regard to the analysis, design, implementation and evaluation process, and implications for participatory ergonomics approaches, are also discussed. A potential user-friendly, qualitative approach to assessing safety culture as part of ergonomics work is presented, based on a recently published conceptual framework that recognises the dynamic and multi-dimensional nature of safety culture. The paper concludes by considering the use of such an approach, where an understanding of different aspects of safety culture within an organisation is seen as important to the success of ergonomics projects. STATEMENT OF RELEVANCE: The relevance of safety culture to ergonomics practice is a key focus of this paper, including its relationship with the systems approach, participatory ergonomics and the ergonomics analysis, design, implementation and evaluation process. An approach to assessing safety culture as part of ergonomics work is presented.

Detailed deposition density maps constructed by large-scale soil sampling for gamma-ray emitting radioactive nuclides from the Fukushima Dai-ichi Nuclear Power Plant accident.

PubMed

Saito, Kimiaki; Tanihata, Isao; Fujiwara, Mamoru; Saito, Takashi; Shimoura, Susumu; Otsuka, Takaharu; Onda, Yuichi; Hoshi, Masaharu; Ikeuchi, Yoshihiro; Takahashi, Fumiaki; Kinouchi, Nobuyuki; Saegusa, Jun; Seki, Akiyuki; Takemiya, Hiroshi; Shibata, Tokushi

2015-01-01

Soil deposition density maps of gamma-ray emitting radioactive nuclides from the Fukushima Dai-ichi Nuclear Power Plant (NPP) accident were constructed on the basis of results from large-scale soil sampling. In total 10,915 soil samples were collected at 2168 locations. Gamma rays emitted from the samples were measured by Ge detectors and analyzed using a reliable unified method. The determined radioactivity was corrected to that of June 14, 2011 by considering the intrinsic decay constant of each nuclide. Finally the deposition maps were created for (134)Cs, (137)Cs, (131)I, (129m)Te and (110m)Ag. The radioactivity ratio of (134)Cs-(137)Cs was almost constant at 0.91 regardless of the locations of soil sampling. The radioactivity ratios of (131)I and (129m)Te-(137)Cs were relatively high in the regions south of the Fukushima NPP site. Effective doses for 50 y after the accident were evaluated for external and inhalation exposures due to the observed radioactive nuclides. The radiation doses from radioactive cesium were found to be much higher than those from the other radioactive nuclides. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

The behavior of U- and Th-series nuclides in groundwater

USGS Publications Warehouse

Porcelli, D.; Swarzenski, P.W.

2003-01-01

Groundwater has long been an active area of research driven by its importance both as a societal resource and as a component in the global hydrological cycle. Key issues in groundwater research include inferring rates of transport of chemical constituents, determining the ages of groundwater, and tracing water masses using chemical fingerprints. While information on the trace elements pertinent to these topics can be obtained from aquifer tests using experimentally introduced tracers, and from laboratory experiments on aquifer materials, these studies are necessarily limited in time and space. Regional studies of aquifers can focus on greater scales and time periods, but must contend with greater complexities and variations. In this regard, the isotopic systematics of the naturally occurring radionuclides in the U- and Th- decay series have been invaluable in investigating aquifer behavior of U, Th, and Ra. These nuclides are present in all groundwaters and are each represented by several isotopes with very different half-lives, so that processes occurring over a range of time-scales can be studied (Table 1⇓). Within the host aquifer minerals, the radionuclides in each decay series are generally expected to be in secular equilibrium and so have equal activities (see Bourdon et al. 2003). In contrast, these nuclides exhibit strong relative fractionations within the surrounding groundwaters that reflect contrasting behavior during release into the water and during interaction with the surrounding host aquifer rocks. Radionuclide data can be used, within the framework of models of the processes involved, to obtain quantitative assessments of radionuclide release from aquifer rocks and groundwater migration rates. The isotopic variations that are generated also have the potential for providing fingerprints for groundwaters from specific aquifer environments, and have even been explored as a means for calculating groundwater ages.

RADIOACTIVE NUCLIDES PRODUCED BY COSMIC RAYS IN SPUTNIK 4

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shedlovsky, J.P.; Kaye, J.H.

1963-09-01

The Sputnik 4 satellite re-entered the earth's atmosphere on September 5, 1962, after 843 days in orbit. From a portion of the recovered iron mass, a number of radioactive nuclides were measured after wet chemical separations. These activities are compared with those found in the Aroos iron meteorite. The ratio of saturation activities Sputnik 4/ Aroos increases, with increasing A, from 0.20 for Ar/sup 37/ to 0.68 for Fe/sup 55/. It appears that this increase is caused by low-energy solar-flare particles. The Co sup 56+57+58/ ratio is 0.098, which reflects the different nickel contents of the two objects. The samplemore » contains 40 dpm/kg Co/sup 60/, which is of noncosmogenic origin. (auth)« less

Why relevant chemical information cannot be exchanged without disclosing structures

NASA Astrophysics Data System (ADS)

Filimonov, Dmitry; Poroikov, Vladimir

2005-09-01

Both society and industry are interested in increasing the safety of pharmaceuticals. Potentially dangerous compounds could be filtered out at early stages of R&D by computer prediction of biological activity and ADMET characteristics. Accuracy of such predictions strongly depends on the quality & quantity of information contained in a training set. Suggestion that some relevant chemical information can be added to such training sets without disclosing chemical structures was generated at the recent ACS Symposium. We presented arguments that such safety exchange of relevant chemical information is impossible. Any relevant information about chemical structures can be used for search of either a particular compound itself or its close analogues. Risk of identifying such structures is enough to prevent pharma industry from relevant chemical information exchange.

Safety first: Instrumentality for reaching safety determines attention allocation under threat.

PubMed

Vogt, Julia; Koster, Ernst H W; De Houwer, Jan

2017-04-01

Theories of attention to emotional information suggest that attentional processes prioritize threatening information. In this article, we suggest that attention will prioritize the events that are most instrumental to a goal in any given context, which in threatening situations is typically reaching safety. To test our hypotheses, we used an attentional cueing paradigm that contained cues signaling imminent threat (i.e., aversive noises) as well as cues that allowed participants to avoid threat (instrumental safety signals). Correct reactions to instrumental safety signals seemingly allowed participants to lower the presentation rate of the threat. Experiment 1 demonstrates that attention prioritizes instrumental safety signals over threat signals. Experiment 2 replicates this finding and additionally compares instrumental safety signals to other action-relevant signals controlling for action relevance as cause of the effects. Experiment 3 demonstrates that when actions toward threat signals permit to avoid threat, attention prioritizes threat signals. Taken together, these results support the view that instrumentality for reaching safety determines the allocation of attention under threat. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Methods of increasing the performance of radionuclide generators used in nuclear medicine: daughter nuclide build-up optimisation, elution-purification-concentration integration, and effective control of radionuclidic purity.

PubMed

Le, Van So; Do, Zoe Phuc-Hien; Le, Minh Khoi; Le, Vicki; Le, Natalie Nha-Truc

2014-06-10

Methods of increasing the performance of radionuclide generators used in nuclear medicine radiotherapy and SPECT/PET imaging were developed and detailed for 99Mo/99mTc and 68Ge/68Ga radionuclide generators as the cases. Optimisation methods of the daughter nuclide build-up versus stand-by time and/or specific activity using mean progress functions were developed for increasing the performance of radionuclide generators. As a result of this optimisation, the separation of the daughter nuclide from its parent one should be performed at a defined optimal time to avoid the deterioration in specific activity of the daughter nuclide and wasting stand-by time of the generator, while the daughter nuclide yield is maintained to a reasonably high extent. A new characteristic parameter of the formation-decay kinetics of parent/daughter nuclide system was found and effectively used in the practice of the generator production and utilisation. A method of "early elution schedule" was also developed for increasing the daughter nuclide production yield and specific radioactivity, thus saving the cost of the generator and improving the quality of the daughter radionuclide solution. These newly developed optimisation methods in combination with an integrated elution-purification-concentration system of radionuclide generators recently developed is the most suitable way to operate the generator effectively on the basis of economic use and improvement of purposely suitable quality and specific activity of the produced daughter radionuclides. All these features benefit the economic use of the generator, the improved quality of labelling/scan, and the lowered cost of nuclear medicine procedure. Besides, a new method of quality control protocol set-up for post-delivery test of radionuclidic purity has been developed based on the relationship between gamma ray spectrometric detection limit, required limit of impure radionuclide activity and its measurement certainty with respect to

Laser cutting: industrial relevance, process optimization, and laser safety

NASA Astrophysics Data System (ADS)

Haferkamp, Heinz; Goede, Martin; von Busse, Alexander; Thuerk, Oliver

1998-09-01

Compared to other technological relevant laser machining processes, up to now laser cutting is the application most frequently used. With respect to the large amount of possible fields of application and the variety of different materials that can be machined, this technology has reached a stable position within the world market of material processing. Reachable machining quality for laser beam cutting is influenced by various laser and process parameters. Process integrated quality techniques have to be applied to ensure high-quality products and a cost effective use of the laser manufacturing plant. Therefore, rugged and versatile online process monitoring techniques at an affordable price would be desirable. Methods for the characterization of single plant components (e.g. laser source and optical path) have to be substituted by an omnivalent control system, capable of process data acquisition and analysis as well as the automatic adaptation of machining and laser parameters to changes in process and ambient conditions. At the Laser Zentrum Hannover eV, locally highly resolved thermographic measurements of the temperature distribution within the processing zone using cost effective measuring devices are performed. Characteristic values for cutting quality and plunge control as well as for the optimization of the surface roughness at the cutting edges can be deducted from the spatial distribution of the temperature field and the measured temperature gradients. Main influencing parameters on the temperature characteristic within the cutting zone are the laser beam intensity and pulse duration in pulse operation mode. For continuous operation mode, the temperature distribution is mainly determined by the laser output power related to the cutting velocity. With higher cutting velocities temperatures at the cutting front increase, reaching their maximum at the optimum cutting velocity. Here absorption of the incident laser radiation is drastically increased due to

Cradle-to-Gate Impact Assessment of a High-Pressure Die-Casting Safety-Relevant Automotive Component

NASA Astrophysics Data System (ADS)

Cecchel, Silvia; Cornacchia, Giovanna; Panvini, Andrea

2016-09-01

The mass of automotive components has a direct influence on several aspects of vehicle performance, including both fuel consumption and tailpipe emissions, but the real environmental benefit has to be evaluated considering the entire life of the products with a proper life cycle assessment. In this context, the present paper analyzes the environmental burden connected to the production of a safety-relevant aluminum high-pressure die-casting component for commercial vehicles (a suspension cross-beam) considering all the phases connected to its manufacture. The focus on aluminum high-pressure die casting reflects the current trend of the industry and its high energy consumption. This work shows a new method that deeply analyzes every single step of the component's production through the implementation of a wide database of primary data collected thanks to collaborations of some automotive supplier companies. This energy analysis shows significant environmental benefits of aluminum recycling.

Safety Climate Among Nontraditional Workers in Construction: Arguing for a Focus on Construed External Safety Image.

PubMed

Stiehl, Emily; Forst, Linda

2018-05-01

Safety climate, employees' perceptions of work-related safety, 1 has been promoted as a leading indicator of workplace safety in construction. 2 , 3 While research has primarily examined internal organizational sources (e.g., manager attitudes, formal organizational policies) on these perceptions, external sources of information might be more relevant to construction workers in nontraditional jobs who work for a limited time and/or have limited interaction with other employees. This paper argues for the future development of a construed external safety image scale to measure employees' perceptions about how external groups view their organization's safety. 4 The construed external safety image would capture the external sources that nontraditional workers use to assess safety climate and will allow public health researchers to identify and change dangerous workplaces while more effectively communicating information about safe workplaces to workers. The public health relevance of safety climate and construed external safety image for monitoring and communicating safety to nontraditional workers require examination.

ESTIMATION OF EFFECTIVE DOSE FROM EXTERNAL EXPOSURE DUE TO SHORT-LIVED NUCLIDES IN THE PREFECTURES SURROUNDING FUKUSHIMA.

PubMed

Miyatake, Hirokazu; Yoshizawa, Nobuaki; Suzuki, Gen

2018-05-11

The Fukushima Daiichi Nuclear Power Plant (FDNPP) accident resulted in a release of radionuclides into the environment. Since the accident, measurements of radiation in the environment such as air dose rate and deposition density of radionuclides have been performed by various organizations and universities. In particular, Japan Atomic Energy Agency (JAEA) has been performing observations of air dose rate using a car-borne survey system continuously over widespread areas. Based on the data measured by JAEA, we estimated effective dose from external exposure in the prefectures surrounding Fukushima. Since car-borne survey started a few months after the accident, the main contribution to measured data comes from 137Cs and 134Cs whose half-lives are relatively long. Using air dose rate of 137Cs and 134Cs and the ratio of deposition density of short-lived nuclides to that of 137Cs and 134Cs, we also estimated contributions to the effective dose from other short-lived nuclides.

Do cosmogenic nuclides (10Be, 14C , 21Ne, 26Al) track late Quaternary climate changes on the Altiplano?

NASA Astrophysics Data System (ADS)

Hippe, K.; Kober, F.; Zeilinger, G.; Ivy-Ochs, S.; Kubik, P.; Maden, C.; Wieler, R.

2010-12-01

The high Altiplano plateau is the most prominent element of the Central Andes, separating the Andean Cordilleras between 15° to 22° S. It represents a tectonically quiet, intramontane basin with arid to semi-arid climate, low relief and internal drainage. Throughout the late Quaternary regional climate on the Altiplano repeatedly changed between wet and dry conditions [1]. The influence of climate on the plateau evolution during the Pleistocene/Holocene is unclear, however, as data on erosion processes and rates on the Altiplano are sparse. Here, we present a multiple-nuclide study investigating surface denudation at the eastern Altiplano of Bolivia (16°-17° S) on millennial and longer timescales. The aim is a better understanding of the complex feedback between climate, tectonics and geomorphology on the topographic evolution of the Andes. Catchment-wide denudation (CWD) rates are provided for a 150 km NW-SE transect along the Altiplano edge based on the analyses of cosmogenic 10Be, 26Al, 21Ne and in-situ 14C in river-borne sediment. Single nuclide CWD rates obtained for 10Be, 26Al and 21Ne are similar for all three nuclides and on the order of 3-37 mm/ka. Thus, the calculated denudation rates provide an averaged denudation history dating back at least to the middle Pleistocene. Denudation rates correlate positively with the mean basin hillslope, which is mainly controlled by basin lithology. For most catchments both, the 26Al/10Be ratios and the 21Ne/10Be ratios indicate a complex erosion/exposure history with probably several periods of sediment storage and burial/shielding totalling ~0.5 - 1.2 Ma. Local geomorphology featuring low slopes and low relief, small terraces and local floodplains also suggests that sediment transport might have been periodically ineffective. Concentrations of in-situ produced short-lived 14C are significantly lower than expected from the concentrations of the long-lived and stable cosmogenic nuclides. This would indicate a 30

Safety Relevant Observations on the ICE High Speed Train

DOT National Transportation Integrated Search

1991-07-01

The safety of high speed rail technology proposed for possible application in the United States is of concern to the Federal Railroad Administration. This report, one in a series of reports planned for high speed rail technologies presents an initial...

Induction of osteosarcoma and acute myeloid leukaemia in CBA/H mice by the alpha-emitting nuclides, uranium-233, plutonium-239 and amercium-241.

PubMed

Ellender, M; Harrison, J D; Pottinger, H; Thomas, J M

2001-01-01

To compare tumour induction in CBA/H mice, principally osteosarcoma and acute myeloid leukaemia, resulting from exposure to the alpha-emitting nuclides, uranium-233, plutonium-239 and americium-241, and to relate differences between the three nuclides to the pattern of dose delivery within tissues. Each nuclide was administered intraperitoneally in citrate solution to three groups of adult male CBA/H mice at levels of activity which gave estimated life-time average skeletal doses of about 0.25-0.3 Gy, 0.5-1 Gy and 1-2 Gy. Animals were carefully monitored and sacrificed as soon as they showed signs of ill health; tumours were identified by standard histopathological techniques. Statistical modelling by Cox regression showed that, considering all three nuclides together, there was a highly significant increase in risk of death from osteosarcoma or myeloid leukaemia with increasing dose rate. For osteosarcoma, the effect was significantly greater for 239Pu than 241Am, while separate analysis for 233U showed no significant increase with increasing dose rate. For example, the increase in relative risk of death from osteosarcoma for an increase in life-time average dose rate to bone of 1 mGyd(-1) was 4.2 (2.7-6.5) for 239Pu, 2.3 (1.4-3.4) for 241Am and 1.1 (0.4-3.1) for 233U. For myeloid leukaemia, there was no significant difference between 239Pu and 241Am in the effect of dose rate. The increase in relative risk from myeloid leukaemia for an increase in average dose rate of 1 mGyd(-1) was 1.8 (1.1-2.8) for 239Pu, 2.0 (1.4-2.9) for 241Am and 1.5 (0.8-2.7) for 233U. Significant increases in renal and hepatic carcinomas were also recorded in animals exposed to 233U and 241Am, respectively. Studies of the distribution of the nuclides within the skeleton, published separately, have shown differences in their retention in individual bones and within bone. The proportions of decays occurring near to endosteal bone surfaces and throughout bone marrow were in the order: 239Pu

Cosmogenic Nuclides 10Be-21Ne Burial Dating of Middle Miocene Sedimentary Formation of the Hongliu Valley in Southern Ningxia Basin: A Case of Isotopic Geochronology Study for the Cenozoic Sedimentary Strata

NASA Astrophysics Data System (ADS)

Ma, Y.; Zhang, H.; Wang, W.; Wu, Y.; Pang, J.; Zheng, D.; Li, D.

2015-12-01

Chronology studies for the Cenozoic sedimentary strata based on the magnetostratigraphy cannot afford the unique chronological sequences in the absence of absolute ages from biostratigraphy or volcanic ash chronology. In situ-produced cosmogenic nuclides provide a powerful tool for the sediment dating based on the time-dependent concentration ratio of two nuclides, which are produced in the same mineral but with different half-lives. Thereinto, 10Be-26Al is the most widely used nuclide pairs, of which the available dating range spans the Plio-Pleistocene. But the coupling of 10Be with the stable nuclide 21Ne would significantly improve the burial dating range up to the middle Miocene, which is promising in revolutionizing the chronology study for the Late Cenozoic terrestrial sedimentary sequences. We have applied 10Be-21Ne pair for dating the middle Miocene sediments of the Hongliu Valley in southern Ningxia basin. Two major features of the sediments are involved in our study: (1) sediments originated from the steady erosion of the source area, and (2) the burial depth of our sample after deposition is time dependent due to the gradual accumulation of sediments into basin. The post-burial nuclide production is estimated to be less than 3%, including the contribution by muon interactions, of the total nuclide concentrations measured in our sample. Our 10Be-21Ne analysis demonstrates the age of the burial sample is 12.4(+0.6/-0.4) Ma, and the erosion rate at the source area is 0.26±0.01 cm ka-1. The sample's burial age is consistent with the age constraint set by the Hongliugou Formation (16.7-5.4 Ma) which we collected the sample in. Vertebrate fossils of Platybelodon tongxinensis with an age between 12 and 15 Ma exhumated along with our sample further verifies the reliability of our dating results for the middle Miocene sediments.This study has shown the improved age range of cosmogenic-nuclide burial dating method by incorporating the stable nuclide 21Ne, and

NMR spectroscopy of Group 13 metal ions: biologically relevant aspects.

PubMed

André, J P; Mäcke, H R

2003-12-01

In spite of the fact that Group 13 metal ions (Al(3+), Ga(3+), In(3+) and Tl(+/3+)) show no main biological role, they are NMR-active nuclides which can be used in magnetic resonance spectroscopy of biologically relevant systems. The fact that these metal ions are quadrupolar (with the exception of thallium) means that they are particularly sensitive to ligand type and coordination geometry. The line width of the NMR signals of their complexes shows a strong dependence on the symmetry of coordination, which constitutes an effective tool in the elucidation of structures. Here we report published NMR studies of this family of elements, applied to systems of biological importance. Special emphasis is given to binding studies of these cations to biological molecules, such as proteins, and to chelating agents of radiopharmaceutical interest. The possibility of in vivo NMR studies is also stressed, with extension to (27)Al-based MRI (magnetic resonance imaging) experiments.

What is lost when searching only one literature database for articles relevant to injury prevention and safety promotion?

PubMed

Lawrence, D W

2008-12-01

To assess what is lost if only one literature database is searched for articles relevant to injury prevention and safety promotion (IPSP) topics. Serial textword (keyword, free-text) searches using multiple synonym terms for five key IPSP topics (bicycle-related brain injuries, ethanol-impaired driving, house fires, road rage, and suicidal behaviors among adolescents) were conducted in four of the bibliographic databases that are most used by IPSP professionals: EMBASE, MEDLINE, PsycINFO, and Web of Science. Through a systematic procedure, an inventory of articles on each topic in each database was conducted to identify the total unduplicated count of all articles on each topic, the number of articles unique to each database, and the articles available if only one database is searched. No single database included all of the relevant articles on any topic, and the database with the broadest coverage differed by topic. A search of only one literature database will return 16.7-81.5% (median 43.4%) of the available articles on any of five key IPSP topics. Each database contributed unique articles to the total bibliography for each topic. A literature search performed in only one database will, on average, lead to a loss of more than half of the available literature on a topic.

Implications of two Holocene time-dependent geomagnetic models for cosmogenic nuclide production rate scaling

NASA Astrophysics Data System (ADS)

Lifton, Nathaniel

2016-01-01

The geomagnetic field is a major influence on in situ cosmogenic nuclide production rates at a given location (in addition to atmospheric pressure and, to a lesser extent, solar modulation effects). A better understanding of how past fluctuations in these influences affected production rates should allow more accurate application of cosmogenic nuclides. As such, this work explores the cosmogenic nuclide production rate scaling implications of two recent time-dependent spherical harmonic geomagnetic models spanning the Holocene. Korte and Constable (2011, Phys. Earth Planet. Inter.188, 247-259) and Korte et al. (2011, Earth Planet. Sci. Lett. 312, 497-505) recently updated earlier spherical harmonic paleomagnetic models with new paleomagnetic data from sediment cores in addition to new archeomagnetic and volcanic data. These updated models offer improved resolution and accuracy over the previous versions, in part due to increased temporal and spatial data coverage. In addition, Pavón-Carrasco et al. (2014, Earth Planet. Sci. Lett. 388, 98-109) developed another time-dependent spherical harmonic model of the Holocene geomagnetic field, based solely on archeomagnetic and volcanic paleomagnetic data from the same underlying paleomagnetic database as the Korte et al. models, but extending to 14 ka. With the new models as input, trajectory-traced estimates of effective vertical cutoff rigidity (RC - the standard method for ordering cosmic ray data) yield significantly different time-integrated scaling predictions when compared to each other and to results using the earlier models. In addition, predictions of each new model using RC are tested empirically using recently published production rate calibration data for both 10Be and 3He, and compared to predictions using corresponding time-varying geocentric dipolar RC formulations and a static geocentric axial dipole (GAD) model. Results for the few calibration sites from geomagnetically sensitive regions suggest that the

Dust and chemical erosion biases in cosmogenic nuclide studies: A factor-of-ten problem that could mask strong climatic effects on landscape evolution

NASA Astrophysics Data System (ADS)

Riebe, C. S.; Arvin, L.; Ferrier, K.; Aciego, S.

2017-12-01

Cosmogenic nuclides have been widely used to quantify erosion in mountain ranges around the world, creating a global database of erosion rates from climatically and lithologically diverse sites, and providing vital clues about how mountain landscape evolution is coupled to Earth's carbon cycle and thus global climate change over geologic timescales. Despite this wealth of data, few studies have observed the widely expected strong control of erosion rates by climatic factors such as precipitation and temperature. Here we show that cosmogenic nuclide studies are prone to biases due to dust deposition and chemical erosion, which together can obscure strong relationships between climate and erosion rates. Erosion rates of sites exposed to intense chemical weathering can be underestimated by two-fold due to chemical enrichment of the cosmogenic target mineral quartz — a result of its high chemical erosion resistance, which increases its residence time and thus reduces its apparent erosion rate compared to other soil minerals. Meanwhile, erosion rates of sites with rapid dust deposition can be overestimated by more than ten-fold, due to dust's contributions to soil mass and target mineral abundance. Compilations of dust fluxes and cosmogenic nuclide data suggest that steep climatic trends in erosion rates, ranging from slow erosion rates in dry settings to twenty-fold faster erosion rates in wet settings, could be largely masked by the combined effects of dust deposition and chemical erosion. We argue that these effects need to be quantified in many cosmogenic nuclide studies of erosion rates. Doing so will require dust input rates; soil depth and density; quartz-enrichment ratios in both saprolite relative to bedrock and soil relative to saprolite; and quartz concentrations in deposited dust. Failure to quantify these crucial parameters can lead to misinterpretation of the strength — and even the sign — of feedbacks between climate and erosion rates in mountain

Mountain erosion over decades and millennia: New insights from sediment yields and cosmogenic nuclides

NASA Astrophysics Data System (ADS)

Callahan, R. P.; Riebe, C. S.; Ferrier, K.

2017-12-01

For more than two decades, cosmogenic nuclides have been used to quantify catchment-wide erosion rates averaged over tens of thousands of years. These rates have been used as baselines for comparison with sediment yields averaged over decades, leading to insights on how human activities such as deforestation and agriculture have influenced the production and delivery of sediment to streams and oceans. Here we present new data from the southern Sierra Nevada, California, where sediment yields have been measured over the last ten years using sediment trapping and gauging methods. Cosmogenic nuclides measured in stream sediment reveal erosion rates that are between 13 and 400 (average = 94) times faster than erosion rates inferred from annual accumulations in sediment traps. We show that the discrepancy can be explained by extremely low sediment trapping efficiency, which leads to bias in the short-term rates due to incomplete capture of suspended sediment. Thus the short-term rates roughly agree with the long-term rates, despite intensive timber harvesting in the study catchments over the last century. This differs from results obtained in similar forested granitic catchments of Idaho, where long-term rates are more than ten times greater than short-term rates because large, rare events do not contribute to the short-term averages. Our analysis of a global database indicates that both the magnitude and sign of differences between short- and long-term average erosion rates are difficult to predict, even when the history of land use in known.

Engineering refinements to overcome default nuclide regulatory constraints

NASA Astrophysics Data System (ADS)

Finn, R.; Capitelli, P.; Sheh, Y.; Lom, C.; Graham, M.; Germain, J. St.

2005-12-01

The "classical" positron emitting radionuclides include oxygen-15, nitrogen-13 and carbon-11 which possess unique properties for medical imaging. They are radionuclides of the fundamental elements of biological matter. They each possess short half-lives which allow their use in designed radiotracers for clinical investigations with minimal risk and they are readily able to be produced in sufficient activities by low energy nuclear reactions. At present several accelerator manufacturers offer production packages for these radionuclides emphasizing targetry with consideration of the cyclotron extracted energies for nuclide production and on-line chemistry systems for the continuous production of specific precursors or radiotracers. Following the installation and acceptance of the MSKCC TR 19/9 Cyclotron, our experience with the procured chemistry module for the preparation of oxygen-15 labeled water has forced us to examine the design and the operation of the synthetic unit with a view toward the state of New York's regulations addressing the environmental pollution from radioactive materials. The chemistry module was refined with subtle modifications to the chemistry procedure/unit and our experience with the unit is presented as an example of our approach to insure regulatory compliance.

The microdistribution of α-active nuclides in the human lung

NASA Astrophysics Data System (ADS)

Henshaw, D. L.; Fews, A. P.

1984-06-01

Elsewhere (refs. [4,5]) the authors have discussed new and elaborate techniques for alpha-particle autoradiography using the nuclear track detector CR-39. These techniques are at present being applied in a major study of the microdistribution of alpha-active nuclides in the human lung. Whole lungs with trachea are obtained at autopsy. Case histories representing a wide spectrum of lung burden are sought but that from the general population serves as a baseline from which all abnormal levels may be compared. The lungs are dissected, loaded against CR-39 and stored deep frozen for 3-20 months. Subsequent analysis of the autoradiograph reveals: (i) The microdistribution of activity. This includes for example the pattern of deposition around the tracheal bifurcation and across the tracheal wall for both the total activity and separately that due to 222Rn + daughter nuclei and, the distribution of single and multiple decays from single points over the storage period of the autoradiograph. The information enables the frequency of single and multiple hits to sensitive cells in the lung to be calculated. This is an important step in estimating the frequency of radiation induced mutations. (ii) The absolute abundance of alpha-active nuclides present at each site. This quantity is determined at particular locations in lung such as bifurcations in the major airways, in corresponding positions on the posterior aspect of the trachea and bronchus and parenchymal lung for each of the five lobes and in the lymph nodes. The information is obtained in normal lung over a wide span of age. This overall information may be used to study the deposition, retention and clearance patterns of different alpha-emitting elements with associated differences in size and physical and chemical nature. These studies in normal lung may provide new information on the mechanism at work in lung for the clearance of particulate matter. They may also be used to predict the behaviour of inhaled alpha

An update on 'dose calibrator' settings for nuclides used in nuclear medicine.

PubMed

Bergeron, Denis E; Cessna, Jeffrey T

2018-06-01

Most clinical measurements of radioactivity, whether for therapeutic or imaging nuclides, rely on commercial re-entrant ionization chambers ('dose calibrators'). The National Institute of Standards and Technology (NIST) maintains a battery of representative calibrators and works to link calibration settings ('dial settings') to primary radioactivity standards. Here, we provide a summary of NIST-determined dial settings for 22 radionuclides. We collected previously published dial settings and determined some new ones using either the calibration curve method or the dialing-in approach. The dial settings with their uncertainties are collected in a comprehensive table. In general, current manufacturer-provided calibration settings give activities that agree with National Institute of Standards and Technology standards to within a few percent.

Aviation safety data accessibility study index: a report on the issues related to public interest in aviation safety data

DOT National Transportation Integrated Search

1997-01-20

This paper reviews aviation safety data and measurement issues relevant to the determination of the best means of providing safety information to the public while ensuring the integrity of the aviation safety system. In addition , the paper examines ...

Early Acheulean technology in the Rietputs Formation, South Africa, dated with cosmogenic nuclides.

PubMed

Gibbon, Ryan J; Granger, Darryl E; Kuman, Kathleen; Partridge, Timothy C

2009-02-01

An absolute dating technique based on the build-up and decay of (26)Al and (10)Be in the mineral quartz provides crucial evidence regarding early Acheulean hominid distribution in South Africa. Cosmogenic nuclide burial dating of an ancient alluvial deposit of the Vaal River (Rietputs Formation) in the western interior of South Africa shows that coarse gravel and sand aggradation there occurred ca 1.57+/-0.22Ma, with individual ages of samples ranging from 1.89+/-0.19 to 1.34+/-0.22Ma. This was followed by aggradation of laminated and cross-bedded fine alluvium at ca 1.26+/-0.10Ma. The Rietputs Formation provides an ideal situation for the use of the cosmogenic nuclide burial dating method, as samples could be obtained from deep mining pits at depths ranging from 7 to 16 meters. Individual dates provide only a minimum age for the stone tool technology preserved within the deposits. Each assemblage represents a time averaged collection. Bifacial tools distributed throughout the coarse gravel and sand unit can be assigned to an early phase of the Acheulean. This is the first absolute radiometric dated evidence for early Acheulean artefacts in South Africa that have been found outside of the early hominid sites of the Gauteng Province. These absolute dates also indicate that handaxe-using hominids inhabited southern Africa as early as their counterparts in East Africa. The simultaneous appearance of the Acheulean in different parts of the continent implies relatively rapid technology development and the widespread use of large cutting tools in the African continent by ca 1.6Ma.

76 FR 22019 - Safety Standard for Toddler Beds

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-20

... warnings should increase consumers' understanding of the connection between the relevant behaviors and... CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Part 1217 RIN 3041-AC79 Safety Standard for Toddler Beds AGENCY: Consumer Product Safety Commission. ACTION: Final rule. SUMMARY: The Consumer Product Safety...

Automating the Generation of Heterogeneous Aviation Safety Cases

NASA Technical Reports Server (NTRS)

Denney, Ewen W.; Pai, Ganesh J.; Pohl, Josef M.

2012-01-01

A safety case is a structured argument, supported by a body of evidence, which provides a convincing and valid justification that a system is acceptably safe for a given application in a given operating environment. This report describes the development of a fragment of a preliminary safety case for the Swift Unmanned Aircraft System. The construction of the safety case fragment consists of two parts: a manually constructed system-level case, and an automatically constructed lower-level case, generated from formal proof of safety-relevant correctness properties. We provide a detailed discussion of the safety considerations for the target system, emphasizing the heterogeneity of sources of safety-relevant information, and use a hazard analysis to derive safety requirements, including formal requirements. We evaluate the safety case using three classes of metrics for measuring degrees of coverage, automation, and understandability. We then present our preliminary conclusions and make suggestions for future work.

[Hazard assessment and occupational safety measures in surgery : Relevant knowledge on occupational medicine].

PubMed

Darius, S; Meyer, F; Böckelmann, I

2016-11-01

Surgeons routinely work in an environment with occupational risks and hazards about which they are often uninformed. Based on the currently available scientific literature this review article describes the various hazards in the operating theater and their effects on personnel, particularly from the surgical perspective. A further aim of this article is to describe the occupational safety measures to reduce the burdens and to maintain the long-term health of personnel. Ultimately, surgeons should be equipped with the necessary knowledge for implementing hazard assessments according to the German Occupational Health and Safety Act. Surgeons are exposed to increased risks and hazards by working in awkward positions with a high risk for musculoskeletal pain and injuries. They are also commonly exposed to inhalational anesthetics, surgical smoke, radiation, noise and infectious agents. Furthermore, the mental and emotional stress associated with these activities is also high. Meaningful occupational safety measures for reduction of burdens are from a technical aspect the installation of effective air extraction systems, measures to reduce exposure to radiation and noise and the use of safer instruments to prevent needle stick injuries. Furthermore, individual occupational safety measures, such as the use of personal protective equipment (e.g. radiation protective clothing and double gloves) must be observed. The consistent implementation and also adherence to these described occupational safety measures and regulations can reduce the burden on operating theater personnel and contribute to maintaining health. Furthermore, periodic preventive healthcare controls and health checks by the company medical officer and individually initiated additional prevention measures can be a sensible augmentation to these safety measures.

On scaling cosmogenic nuclide production rates for altitude and latitude using cosmic-ray measurements

NASA Astrophysics Data System (ADS)

Desilets, Darin; Zreda, Marek

2001-11-01

The wide use of cosmogenic nuclides for dating terrestrial landforms has prompted a renewed interest in characterizing the spatial distribution of terrestrial cosmic rays. Cosmic-ray measurements from neutron monitors, nuclear emulsions and cloud chambers have played an important role in developing new models for scaling cosmic-ray neutron intensities and, indirectly, cosmogenic production rates. Unfortunately, current scaling models overlook or misinterpret many of these data. In this paper, we describe factors that must be considered when using neutron measurements to determine scaling formulations for production rates of cosmogenic nuclides. Over the past 50 years, the overwhelming majority of nucleon flux measurements have been taken with neutron monitors. However, in order to use these data for scaling spallation reactions, the following factors must be considered: (1) sensitivity of instruments to muons and to background, (2) instrumental biases in energy sensitivity, (3) solar activity, and (4) the way of ordering cosmic-ray data in the geomagnetic field. Failure to account for these factors can result in discrepancies of as much as 7% in neutron attenuation lengths measured at the same location. This magnitude of deviation can result in an error on the order of 20% in cosmogenic production rates scaled from 4300 m to sea level. The shapes of latitude curves of nucleon flux also depend on these factors to a measurable extent, thereby causing additional uncertainties in cosmogenic production rates. The corrections proposed herein significantly improve our ability to transfer scaling formulations based on neutron measurements to scaling formulations applicable to spallation reactions, and, therefore, constitute an important advance in cosmogenic dating methodology.

Review of Safety Reports Involving Electronic Flight Bags.

DOT National Transportation Integrated Search

2010-04-01

Safety events in which Electronic Flight Bags (EFBs) were a factor are reviewed. Relevant reports were obtained from the public Aviation Safety Reporting System (ASRS) database and the National Transportation Safety Board (NTSB) accident report datab...

Liquefied natural gas (LNG) safety

NASA Technical Reports Server (NTRS)

Ordin, P. M.

1977-01-01

Bibliography, assembled from computer search of NASA Aerospace Safety Data Bank, including title of report, author, abstract, source, description of figures, key references, and key words or subject terms. Publication is indexed by key subjects and by authors. Items are relevant to design engineers and safety specialists.

Development of a check sheet for collecting information necessary for occupational safety and health activities and building relevant systems in overseas business places.

PubMed

Kajiki, Shigeyuki; Kobayashi, Yuichi; Uehara, Masamichi; Nakanishi, Shigemoto; Mori, Koji

2016-06-07

This study aimed to develop an information gathering check sheet to efficiently collect information necessary for Japanese companies to build global occupational safety and health management systems in overseas business places. The study group consisted of 2 researchers with occupational physician careers in a foreign-affiliated company in Japan and 3 supervising occupational physicians who were engaged in occupational safety and health activities in overseas business places. After investigating information and sources of information necessary for implementing occupational safety and health activities and building relevant systems, we conducted information acquisition using an information gathering check sheet in the field, by visiting 10 regions in 5 countries (first phase). The accuracy of the information acquired and the appropriateness of the information sources were then verified in study group meetings to improve the information gathering check sheet. Next, the improved information gathering check sheet was used in another setting (3 regions in 1 country) to confirm its efficacy (second phase), and the information gathering check sheet was thereby completed. The information gathering check sheet was composed of 9 major items (basic information on the local business place, safety and health overview, safety and health systems, safety and health staff, planning/implementation/evaluation/improvement, safety and health activities, laws and administrative organs, local medical care systems and public health, and medical support for resident personnel) and 61 medium items. We relied on the following eight information sources: the internet, company (local business place and head office in Japan), embassy/consulate, ISO certification body, university or other educational institutions, and medical institutions (aimed at Japanese people or at local workers). Through multiple study group meetings and a two-phased field survey (13 regions in 6 countries), an information

On the use of naturalistic methods to examine safety-relevant behaviours amongst children and evaluate a cycling education program.

PubMed

Hatfield, J; Dozza, M; Patton, D A; Maharaj, P; Boufous, S; Eveston, T

2017-11-01

School-based cycling education programs aim to improve cycling safety and participation amongst children. Available research suggests that typical programs, which focus on bicycle manoeuvring skills, have limited effects on behaviour observed on a track or planned route. The current study uses theoretically more valid, naturalistic cycling data, to evaluate Safe Cycle, a program that incorporates hazard and self-awareness training. Soon after Safe Cycle was delivered at treatment schools, research bicycles instrumented with a rearward- and a forward-facing camera were loaned to six children from treatment schools and six children from (waitlist) control schools. In each group half the children were in Year 6, and half were in Year 7/8. Each child was instructed to ride the research bicycle instead of their own bicycle for the 1-2 weeks that they had a research bicycle. Video data were reduced using a purpose-designed coding scheme that identified whether participants performed specific safety-relevant behaviours in appropriate circumstances. While the participants controlled their bicycles well, gave way appropriately to traffic at intersections, and stopped at red lights, participants frequently removed one or both hands from the handlebars, and seldom signalled turns, conducted over-shoulder-checks when changing lanes, or looked in multiple directions at intersections (except when crossing a road). While aspects of design and small sample sizes limited evaluation findings, this research demonstrated the feasibility and potential of naturalistic data to support cycling education program evaluation. Further, the study substantially extended available naturalistic study of children's cycling behaviour to highlight behaviours which might be targeted by cycling safety initiatives. Copyright © 2017 Elsevier Ltd. All rights reserved.

Challenging Minimum Deterrence: Articulating the Contemporary Relevance of Nuclear Weapons

DTIC Science & Technology

2016-07-13

Command and Control: Nuclear Weapons, the Damascus Accident , and the Illusion of Safety (New York: Penguin Press, 2013), 484. 36. Keir A. Lieber and...Remembrance of Things Past,” 78. 53. Scott D. Sagan, The Limits of Safety: Organizations, Accidents , and Nuclear Weapons (Princeton, NJ: Princeton...16 | Air & Space Power Journal Challenging Minimum Deterrence Articulating the Contemporary Relevance of Nuclear Weapons Maj Joshua D. Wiitala, USAF

Safety compliance and safety climate: A repeated cross-sectional study in the oil and gas industry.

PubMed

Kvalheim, Sverre A; Dahl, Øyvind

2016-12-01

Violations of safety rules and procedures are commonly identified as a causal factor in accidents in the oil and gas industry. Extensive knowledge on effective management practices related to improved compliance with safety procedures is therefore needed. Previous studies of the causal relationship between safety climate and safety compliance demonstrate that the propensity to act in accordance with prevailing rules and procedures is influenced to a large degree by workers' safety climate. Commonly, the climate measures employed differ from one study to another and identical measures of safety climate are seldom tested repeatedly over extended periods of time. This research gap is addressed in the present study. The study is based on a survey conducted four times among sharp-end workers of the Norwegian oil and gas industry (N=31,350). This is done by performing multiple tests (regression analysis) over a period of 7years of the causal relationship between safety climate and safety compliance. The safety climate measure employed is identical across the 7-year period. Taking all periods together, the employed safety climate model explained roughly 27% of the variance in safety compliance. The causal relationship was found to be stable across the period, thereby increasing the reliability and the predictive validity of the factor structure. The safety climate factor that had the most powerful effect on safety compliance was work pressure. The factor structure employed shows high predictive validity and should therefore be relevant to organizations seeking to improve safety in the petroleum sector. The findings should also be relevant to other high-hazard industries where safety rules and procedures constitute a central part of the approach to managing safety. Copyright © 2016 Elsevier Ltd and National Safety Council. All rights reserved.

21 CFR 601.35 - Evaluation of safety.

Code of Federal Regulations, 2013 CFR

2013-04-01

... information, the following types of data: (A) Pharmacology data, (B) Toxicology data, (C) Clinical adverse event data, and (D) Radiation safety assessment. (2) The amount of new safety data required will depend... relevant to risk and will specify the amount and type of safety data that are appropriate for each category...

Erosion of mountain plateaus along Sognefjord, Norway, constrained by cosmogenic nuclides

NASA Astrophysics Data System (ADS)

Andersen, Jane Lund; Egholm, David L.; Knudsen, Mads F.; Linge, Henriette; Jansen, John D.

2016-04-01

Norway is famous for its deeply incised, steep-sided fjords, carved out by glacial erosion. The high relief of the fjords stands in contrast to the extensive areas of relatively low relief found between the fjords. The origin and development of these low-relief areas remain debated. The classical interpretation relates them to a Mesozoic peneplanation surface, uplifted to the current high elevation in the early Cenozoic (e.g. Nesje, 1994). The validity of this interpretation has, however, been repeatedly questioned in recent times (e.g. Nielsen et al. 2009, Steer et al. 2012). Recent studies point instead to a significant impact of glacial and periglacial erosion processes on the long-term development of the low-relief surfaces (Egholm et al. 2015). Here, we present a large new dataset of in-situ produced cosmogenic 10Be and 26Al in bedrock and boulders from the high, flat summit surfaces along a transect from the coast to the inner parts of Sognefjorden in Norway. Our results indicate substantial glacial modification of the sampled low-relief surfaces within the last 50 ka. Close to the coast, at an elevation of around 700 meters, the cosmogenic nuclide signal was reset around the Younger Dryas due to extensive glacial erosion. Regarding the higher surfaces further inland, our results indicate a maximum cosmogenic nuclide inheritance of 20-30 ka prior to the last deglaciation. We do not find any signs of exceptional longevity of the low-relief landscape. In contrast, our results indicate that the low-relief areas were continuously eroded by glacial and periglacial processes in the Quaternary. Nesje & Whillans. Erosion of Sognefjord, Norway. Geomorphology 9(1), 33-45, 1994. Nielsen et al. The evolution of western Scandinavian topography: a review of Neogene uplift versus the ICE (isostasy-climate-erosion) hypothesis. Journal of Geodynamics 47(2), 72-95, 2009. Steer et al. Bimodal Plio-Quaternary glacial erosion of fjords and low-relief surfaces in Scandinavia

What is the most relevant standard of success in assisted reproduction? Defining outcome in ART: a Gordian knot of safety, efficacy and quality.

PubMed

Land, Jolande A; Evers, Johannes L H

2004-05-01

In the course of the present Debate series, several new outcome measures for assisted reproduction have been proposed to encourage the transfer of fewer embryos, in order to diminish the number of multiple pregnancies. The implementation of these recommendations, however, is hampered by the perception that safety and efficacy are communicating vessels: it is presumed that by decreasing the number of embryos transferred, pregnancy rates will decrease as well. Data from national and international registries, however, do not confirm the assumption of the communicating vessels: pregnancy rates tend to be low in countries in which many embryos are transferred, and the highest pregnancy rates occur where the number of embryos per transfer is low. Only top-level clinics (where treatment efficacy is guaranteed) are able to decrease the number of embryos transferred without compromising their pregnancy rate, and to vouch for safety in this way. Elective single embryo transfer (eSET) can never be mandatory in all patients, but the percentage of eSETs performed by a particular assisted reproduction treatment centre does reflect its quality: the ultimate outcome measure of efficacy ánd safety. Therefore, the eSET rate is the most relevant qualifier of performance in assisted reproduction.

Antidrug Antibody Formation in Oncology: Clinical Relevance and Challenges.

PubMed

van Brummelen, Emilie M J; Ros, Willeke; Wolbink, Gertjan; Beijnen, Jos H; Schellens, Jan H M

2016-10-01

: In oncology, an increasing number of targeted anticancer agents and immunotherapies are of biological origin. These biological drugs may trigger immune responses that lead to the formation of antidrug antibodies (ADAs). ADAs are directed against immunogenic parts of the drug and may affect efficacy and safety. In other medical fields, such as rheumatology and hematology, the relevance of ADA formation is well established. However, the relevance of ADAs in oncology is just starting to be recognized, and literature on this topic is scarce. In an attempt to fill this gap in the literature, we provide an up-to-date status of ADA formation in oncology. In this focused review, data on ADAs was extracted from 81 clinical trials with biological anticancer agents. We found that most biological anticancer drugs in these trials are immunogenic and induce ADAs (63%). However, it is difficult to establish the clinical relevance of these ADAs. In order to determine this relevance, the possible effects of ADAs on pharmacokinetics, efficacy, and safety parameters need to be investigated. Our data show that this was done in fewer than 50% of the trials. In addition, we describe the incidence and consequences of ADAs for registered agents. We highlight the challenges in ADA detection and argue for the importance of validating, standardizing, and describing well the used assays. Finally, we discuss prevention strategies such as immunosuppression and regimen adaptations. We encourage the launch of clinical trials that explore these strategies in oncology. Because of the increasing use of biologicals in oncology, many patients are at risk of developing antidrug antibodies (ADAs) during therapy. Although clinical consequences are uncertain, ADAs may affect pharmacokinetics, patient safety, and treatment efficacy. ADA detection and reporting is currently highly inconsistent, which makes it difficult to evaluate the clinical consequences. Standardized reporting of ADA investigations in

Human aspects of mission safety

NASA Technical Reports Server (NTRS)

Connors, Mary M.

1989-01-01

Recent discussions of psychology's involvement in spaceflight have emphasized its role in enhancing space living conditions and incresing crew productivity. While these goals are central to space missions, behavioral scientists should not lose sight of a more basic flight requirement - that of crew safety. This paper examines some of the processes employed in the American space program in support of crew safety and suggests that behavioral scientists could contribute to flight safety, both through these formal processes and through less formal methods. Various safety areas of relevance to behavioral scientists are discussed.

Fundamentals of Medicare Patient Safety Surveillance: Intent, Relevance, and Transparency

DTIC Science & Technology

2005-01-01

context of a patient safety surveillance system, the medical record barrier is actually twofold, presenting two challenges—indexing and analysis...preventable adverse events in elderly patients : population based review of medical records. BMJ 2000;320(7237):741–4. 3. Hayward R, Hofer T...Brennan TA, Leape LL, Laird NM, et al. Incidence of adverse events and negligence in hospitalized patients - results of the Harvard Medical Practice

Rapid sequential determination of Pu, 90Sr and 241Am nuclides in environmental samples using an anion exchange and Sr-Spec resins.

PubMed

Lee, M H; Ahn, H J; Park, J H; Park, Y J; Song, K

2011-02-01

This paper presents a quantitative and rapid method of sequential separation of Pu, (90)Sr and (241)Am nuclides in environmental soil samples with an anion exchange resin and Sr Spec resin. After the sample solution was passed through an anion exchange column connected to a Sr Spec column, Pu isotopes were purified from the anion exchange column. Strontium-90 was separated from other interfering elements by the Sr Spec column. Americium-241 was purified from lanthanides by the anion exchange resin after oxalate co-precipitation. Measurement of Pu and Am isotopes was carried out using an α-spectrometer. Strontium-90 was measured by a low-level liquid scintillation counter. The radiochemical procedure of Pu, (90)Sr and (241)Am nuclides investigated in this study validated by application to IAEA reference materials and environmental soil samples. Copyright © 2010 Elsevier Ltd. All rights reserved.

Assuring Safety in Bus Transportation--Update on Federal Legislation.

ERIC Educational Resources Information Center

Craft, Nick

2003-01-01

Discusses the growing use of vans for transportation by child care centers and increasing concerns about van safety. Presents information on relevant federal legislation related to motor vehicle safety and the safety standards of the National Highway Traffic Safety Administration. Recommends that child care programs replace retiring vans with…

Applying ISO 11929:2010 Standard to detection limit calculation in least-squares based multi-nuclide gamma-ray spectrum evaluation

NASA Astrophysics Data System (ADS)

Kanisch, G.

2017-05-01

The concepts of ISO 11929 (2010) are applied to evaluation of radionuclide activities from more complex multi-nuclide gamma-ray spectra. From net peak areas estimated by peak fitting, activities and their standard uncertainties are calculated by weighted linear least-squares method with an additional step, where uncertainties of the design matrix elements are taken into account. A numerical treatment of the standard's uncertainty function, based on ISO 11929 Annex C.5, leads to a procedure for deriving decision threshold and detection limit values. The methods shown allow resolving interferences between radionuclide activities also in case of calculating detection limits where they can improve the latter by including more than one gamma line per radionuclide. The co"mmon single nuclide weighted mean is extended to an interference-corrected (generalized) weighted mean, which, combined with the least-squares method, allows faster detection limit calculations. In addition, a new grouped uncertainty budget was inferred, which for each radionuclide gives uncertainty budgets from seven main variables, such as net count rates, peak efficiencies, gamma emission intensities and others; grouping refers to summation over lists of peaks per radionuclide.

Instrumental activation analysis of coal and fly ash with thermal and epithermal neutrons and short-lived nuclides

USGS Publications Warehouse

Steinnes, E.; Rowe, J.J.

1976-01-01

Instrumental neutron activation analysis is applied to the determination of about 25 elements in coals and fly ash by means of nuclides with half-lives of less than 48 h ; thermal and epithermal irradiations are used. The results indicate that epithermal activation is preferable for twelve of the elements (Ga, As, Br, Sr, In, Cs, Ba, La, Sm, Ho, W and U). Data for SRM 1632 (coal) and SRM 1633 (fly ash) compare favorably with the results obtained by other investigators. ?? 1976.

Culturally relevant model program to prevent and reduce agricultural injuries.

PubMed

Helitzer, D L; Hathorn, G; Benally, J; Ortega, C

2014-07-01

Limited research has explored pesticide injury prevention among American Indian farmers. In a five-year agricultural intervention, a university-community partnership, including the University of New Mexico School of Medicine, New Mexico State University, Shiprock Area Cooperative Extension Service, and Navajo Nation communities, used a culturally relevant model to introduce and maintain safe use of integrated pest management techniques. We applied the Diffusion of Innovations theory and community-based approaches to tailor health promotion strategies for our intervention. In a longitudinal study with repeated measures, we trained six "model farmers" to be crop management experts in pesticide safety, application, and control. Subsequently, these model farmers worked with 120 farm families randomized into two groups: intervention (Group 1) and delayed intervention (Group 2). Measurements included a walk-through analysis, test of knowledge and attitudes, and yield analysis. Both groups demonstrated improvements in pesticide storage behaviors after training. Test scores regarding safety practices improved significantly: from 57.3 to 72.4 for Group 1 and from 52.6 to 76.3 for Group 2. Group 1 maintained their knowledge and safety practices after the intervention. Attitudes about pesticides and communication of viewpoints changed across the study years. With pesticides and fertilizer, the number of corn ears increased by 56.3% and yield (kg m(-2)) of alfalfa increased by 41.2%. The study combined traditional farming practices with culturally relevant approaches and behavior change theory to affect knowledge, safety practices, attitudes, communication channels, and crop yield. Storage behaviors, use of pesticides and safety and application equipment, and safety practice knowledge changed significantly, as did attitudes about social networking, social support, and the compatibility and relative advantage of pesticides for farms.

Study on immobilization and migration of nuclide u in superficial soil of uranium tailings pond

NASA Astrophysics Data System (ADS)

Chang, Zhe; Zhou, Shukui

2017-05-01

The uranium tailings in southern China was used as the object of study to study the fixation and migration characteristics of nuclide U in shallow tailings. The results showed that the precipitation of tailings in the tailings soil was not linearly related to the depth during the acid rain leaching process. Tailings soil in the role of fixatives, when the lime as a fixative, the tailings of different soil uranium in 20 days after the re-precipitation. However, when lime and ammonium phosphate were used as fixing agents, the cumulative precipitation of U had a significant effect, and the migration of uranium was inhibited.

Work plan for improving the DARWIN2.3 depleted material balance calculation of nuclides of interest for the fuel cycle

NASA Astrophysics Data System (ADS)

Rizzo, Axel; Vaglio-Gaudard, Claire; Martin, Julie-Fiona; Noguère, Gilles; Eschbach, Romain

2017-09-01

DARWIN2.3 is the reference package used for fuel cycle applications in France. It solves the Boltzmann and Bateman equations in a coupling way, with the European JEFF-3.1.1 nuclear data library, to compute the fuel cycle values of interest. It includes both deterministic transport codes APOLLO2 (for light water reactors) and ERANOS2 (for fast reactors), and the DARWIN/PEPIN2 depletion code, each of them being developed by CEA/DEN with the support of its industrial partners. The DARWIN2.3 package has been experimentally validated for pressurized and boiling water reactors, as well as for sodium fast reactors; this experimental validation relies on the analysis of post-irradiation experiments (PIE). The DARWIN2.3 experimental validation work points out some isotopes for which the depleted concentration calculation can be improved. Some other nuclides have no available experimental validation, and their concentration calculation uncertainty is provided by the propagation of a priori nuclear data uncertainties. This paper describes the work plan of studies initiated this year to improve the accuracy of the DARWIN2.3 depleted material balance calculation concerning some nuclides of interest for the fuel cycle.

Microbiological Food Safety Surveillance in China

PubMed Central

Pei, Xiaoyan; Li, Ning; Guo, Yunchang; Liu, Xiumei; Yan, Lin; Li, Ying; Yang, Shuran; Hu, Jing; Zhu, Jianghui; Yang, Dajin

2015-01-01

Microbiological food safety surveillance is a system that collects data regarding food contamination by foodborne pathogens, parasites, viruses, and other harmful microbiological factors. It helps to understand the spectrum of food safety, timely detect food safety hazards, and provide relevant data for food safety supervision, risk assessment, and standards-setting. The study discusses the microbiological surveillance of food safety in China, and introduces the policies and history of the national microbiological surveillance system. In addition, the function and duties of different organizations and institutions are provided in this work, as well as the generation and content of the surveillance plan, quality control, database, and achievement of the microbiological surveillance of food safety in China. PMID:26343705

High-Throughput Toxicity Testing: New Strategies for Assessing Chemical Safety

EPA Science Inventory

In recent years, the food industry has made progress in improving safety testing methods focused on microbial contaminants in order to promote food safety. However, food industry toxicologists must also assess the safety of food-relevant chemicals including pesticides, direct add...

The Safety Argumentation Schools of Thought

NASA Technical Reports Server (NTRS)

Graydon, Patrick John

2017-01-01

Safety cases have been produced and researched for decades. Definitions of `safety case' agree on both the need to generate suitable evidence and the central role of argument. But the relevant literature seems to exhibit multiple schools of thought that are largely unrecognized and somewhat at odds with each other. This paper presents preliminary results from research to identify and characterize the safety case schools of thought so as to reduce confusion and discord in research and practice.

Promoting a Culture of Safety as a Patient Safety Strategy

PubMed Central

Weaver, Sallie J.; Lubomksi, Lisa H.; Wilson, Renee F.; Pfoh, Elizabeth R.; Martinez, Kathryn A.; Dy, Sydney M.

2015-01-01

Developing a culture of safety is a core element of many efforts to improve patient safety and care quality. This systematic review identifies and assesses interventions used to promote safety culture or climate in acute care settings. The authors searched MEDLINE, CINAHL, PsycINFO, Cochrane, and EMBASE to identify relevant English-language studies published from January 2000 to October 2012. They selected studies that targeted health care workers practicing in inpatient settings and included data about change in patient safety culture or climate after a targeted intervention. Two raters independently screened 3679 abstracts (which yielded 33 eligible studies in 35 articles), extracted study data, and rated study quality and strength of evidence. Eight studies included executive walk rounds or interdisciplinary rounds; 8 evaluated multicomponent, unit-based interventions; and 20 included team training or communication initiatives. Twenty-nine studies reported some improvement in safety culture or patient outcomes, but measured outcomes were highly heterogeneous. Strength of evidence was low, and most studies were pre–post evaluations of low to moderate quality. Within these limits, evidence suggests that interventions can improve perceptions of safety culture and potentially reduce patient harm. PMID:23460092

Age-erosion constraints on an Early Pleistocene paleosol in Yukon, Canada, with profiles of 10Be and 26Al: Evidence for a significant loess cover effect on cosmogenic nuclide production rates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hidy, Alan J.; Gosse, John C.; Sanborn, Paul

We report that Wounded Moose type paleosols developed on remnant deposits of Late Pliocene to Early Pleistocene [pre-Reid] Cordilleran Ice Sheet [CIS] glaciations in central Yukon, Canada. It is an important regional soil-geomorphic marker at the boundary between early CIS advances and the non-glaciated regions of Yukon and Alaska. Yet, at present, its age is poorly constrained between the Reid [0.2 Ma] and earliest [2.84 Ma] CIS advances. Here, we apply depth profiles of in situ-produced cosmogenic 26Al and 10Be to obtain both a minimum exposure age [1.12 +0.44/ -0.36 Ma, 2σ] and maximum erosion rate [1.1 +0.9/ -0.5 mmore » Myr -1] for the Wounded Moose paleosol. Here, our results show that this soil formed under exceptionally stable conditions [max erosion rate similar to polar bedrock erosion rates] and that it pre-dates the emergence of the 100 ka [eccentricity] climate cycle. Contrasting our results from single- and joint-nuclide depth profile models reveals a significant discrepancy between calculated and effective 10Be and 26Al production rates [40–65% of expected values]. We interpret this discrepancy as the result of intermittent loess cover—with a time-averaged depth between 60 and 110 cm—which significantly reduced apparent exposure ages obtained from the single–nuclide model. The observation of such a significant loess-cover effect on cosmogenic nuclide production has implications for exposure dating in glacial and periglacial environments; a multi-nuclide sampling strategy is required to quantify this effect.« less

Age-erosion constraints on an Early Pleistocene paleosol in Yukon, Canada, with profiles of 10Be and 26Al: Evidence for a significant loess cover effect on cosmogenic nuclide production rates

DOE PAGES

Hidy, Alan J.; Gosse, John C.; Sanborn, Paul; ...

2018-02-16

We report that Wounded Moose type paleosols developed on remnant deposits of Late Pliocene to Early Pleistocene [pre-Reid] Cordilleran Ice Sheet [CIS] glaciations in central Yukon, Canada. It is an important regional soil-geomorphic marker at the boundary between early CIS advances and the non-glaciated regions of Yukon and Alaska. Yet, at present, its age is poorly constrained between the Reid [0.2 Ma] and earliest [2.84 Ma] CIS advances. Here, we apply depth profiles of in situ-produced cosmogenic 26Al and 10Be to obtain both a minimum exposure age [1.12 +0.44/ -0.36 Ma, 2σ] and maximum erosion rate [1.1 +0.9/ -0.5 mmore » Myr -1] for the Wounded Moose paleosol. Here, our results show that this soil formed under exceptionally stable conditions [max erosion rate similar to polar bedrock erosion rates] and that it pre-dates the emergence of the 100 ka [eccentricity] climate cycle. Contrasting our results from single- and joint-nuclide depth profile models reveals a significant discrepancy between calculated and effective 10Be and 26Al production rates [40–65% of expected values]. We interpret this discrepancy as the result of intermittent loess cover—with a time-averaged depth between 60 and 110 cm—which significantly reduced apparent exposure ages obtained from the single–nuclide model. The observation of such a significant loess-cover effect on cosmogenic nuclide production has implications for exposure dating in glacial and periglacial environments; a multi-nuclide sampling strategy is required to quantify this effect.« less

Regolith formation rate from U-series nuclides: Implications from the study of a spheroidal weathering profile in the Rio Icacos watershed (Puerto Rico)

NASA Astrophysics Data System (ADS)

Chabaux, F.; Blaes, E.; Stille, P.; di Chiara Roupert, R.; Pelt, E.; Dosseto, A.; Ma, L.; Buss, H. L.; Brantley, S. L.

2013-01-01

A 2 m-thick spheroidal weathering profile, developed on a quartz diorite in the Rio Icacos watershed (Luquillo Mountains, eastern Puerto Rico), was analyzed for major and trace element concentrations, Sr and Nd isotopic ratios and U-series nuclides (238U-234U-230Th-226Ra). In this profile a 40 cm thick soil horizon is overlying a 150 cm thick saprolite which is separated from the basal corestone by a ˜40 cm thick rindlet zone. The Sr and Nd isotopic variations along the whole profile imply that, in addition to geochemical fractionations associated to water-rock interactions, the geochemical budget of the profile is influenced by a significant accretion of atmospheric dusts. The mineralogical and geochemical variations along the profile also confirm that the weathering front does not progress continuously from the top to the base of the profile. The upper part of the profile is probably associated with a different weathering system (lateral weathering of upper corestones) than the lower part, which consists of the basal corestone, the associated rindlet system and the saprolite in contact with these rindlets. Consequently, the determination of weathering rates from 238U-234U-230Th-226Ra disequilibrium in a series of samples collected along a vertical depth profile can only be attempted for samples collected in the lower part of the profile, i.e. the rindlet zone and the lower saprolite. Similar propagation rates were derived for the rindlet system and the saprolite by using classical models involving loss and gain processes for all nuclides to interpret the variation of U-series nuclides in the rindlet-saprolite subsystem. The consistency of these weathering rates with average weathering and erosion rates derived via other methods for the whole watershed provides a new and independent argument that, in the Rio Icacos watershed, the weathering system has reached a geomorphologic steady-state. Our study also indicates that even in environments with differential

Improvement of nuclide leaching resistance of paraffin waste form with low density polyethylene.

PubMed

Kim, Chang Lak; Park, Joo Wan; Kim, Ju Youl; Chung, Chang Hyun

2002-01-01

Low-level liquid borate wastes have been immobilized with paraffin wax using a concentrate waste drying system (CWDS) in Korean nuclear power plants. The possibility for improving chemical durability of paraffin waste form was suggested in this study. A small amount of low density polyethylene (LDPE) was added to increase the leaching resistance of the existing paraffin waste form. The influence of LDPE on the leaching behavior of waste form was investigated by performing leaching test according to ANSI/ANS-16.1 procedure during 325 days. It was observed that the leaching of nuclides immobilized within paraffin waste form made a marked reduction although little content of LDPE was added to waste form. The acceptance criteria of paraffin waste form associated with leachability index (LI) and compressive strength after the leaching test were fully satisfied with the help of LDPE.

Assessment of Safety Standards for Automotive Electronic Control Systems

DOT National Transportation Integrated Search

2016-06-01

This report summarizes the results of a study that assessed and compared six industry and government safety standards relevant to the safety and reliability of automotive electronic control systems. These standards include ISO 26262 (Road Vehicles - ...

Ice Elevation Changes in the Ellsworth Mountains, Antarctica Using Multiple Cosmogenic Nuclides

NASA Astrophysics Data System (ADS)

Marrero, S.; Hein, A.; Sugden, D.; Woodward, J.; Dunning, S.; Reid, K.

2014-12-01

Well-dated geologic data points provide important indicators that can be used for the reconstruction of ice sheet dynamics and as constraints in ice sheet models predicting future change. Cosmogenic nuclides, which accumulate in rocks exposed at the earth's surface, can be used to directly date the exposure age of the rock surfaces that have been created through glacial erosion or deposition. The technique requires a detailed understanding of the local geomorphology as well as awareness of the post-depositional processes that may affect the interpretation of exposure ages. Initial surface exposure ages (10Be, 26Al, 21Ne, and 36Cl ) from local limestone bedrock and other glacially deposited exotic lithologies provide a history spanning from 0 to 1.1 Ma in the Patriot, Independence, and Marble Hills in the southern Ellsworth Mountains, Antarctica. Using the new surface exposure ages combined with geomorphological mapping, we will discuss the implications for the glacial history of the southern Ellsworth Mountains.

The role of organizational trust in safety climate's influence on organizational outcomes.

PubMed

Kath, Lisa M; Magley, Vicki J; Marmet, Matthew

2010-09-01

Based on elements of social exchange theory and other conceptualizations of trust, a model was developed situating organizational trust as a central component to the relationship that safety climate has with organizational outcomes. Specifically, the model specified that two facets of safety climate--upward safety communication and management attitudes toward safety--would be positively related to organizational trust. Increased levels of trust would then predict increased motivation to engage in safe job-related behaviors, increased job satisfaction, and decreased turnover intentions. Another hypothesis investigated whether job safety relevance would moderate the relationship between safety climate and trust. Online survey research was conducted with 599 employees from 97 work groups across a New England grocery store chain. Hierarchical linear modeling indicated support for trust mediating the relationship between safety climate and organizational outcomes; further, the relationship between safety climate and trust was stronger within work groups where safety was more relevant. 2009 Elsevier Ltd. All rights reserved.

USDOT guidance summary for connected vehicle deployments : safety management.

DOT National Transportation Integrated Search

2016-07-01

This document provides guidance material in regards to safety management plan for the CV Pilots DeploymentConcept Development Phase. This guidance provides key concepts and references in developing the SafetyManagement Plan in Task 4, lists relevant ...

Dependence of nuclear quadrupole resonance transitions on the electric field gradient asymmetry parameter for nuclides with half-integer spins

DOE PAGES

Cho, Herman

2016-02-28

Allowed transition energies and eigenstate expansions have been calculated and tabulated in numerical form as functions of the electric field gradient asymmetry parameter for the zero field Hamiltonian of quadrupolar nuclides with I = 3/2,5/2,7/2, and 9/2. These results are essential to interpret nuclear quadrupole resonance (NQR) spectra and extract accurate values of the electric field gradient tensors. Furthermore, applications of NQR methods to studies of electronic structure in heavy element systems are proposed.

Impact of Nuclear Data Uncertainties on Calculated Spent Fuel Nuclide Inventories and Advanced NDA Instrument Response

DOE PAGES

Hu, Jianwei; Gauld, Ian C.

2014-12-01

The U.S. Department of Energy’s Next Generation Safeguards Initiative Spent Fuel (NGSI-SF) project is nearing the final phase of developing several advanced nondestructive assay (NDA) instruments designed to measure spent nuclear fuel assemblies for the purpose of improving nuclear safeguards. Current efforts are focusing on calibrating several of these instruments with spent fuel assemblies at two international spent fuel facilities. Modelling and simulation is expected to play an important role in predicting nuclide compositions, neutron and gamma source terms, and instrument responses in order to inform the instrument calibration procedures. As part of NGSI-SF project, this work was carried outmore » to assess the impacts of uncertainties in the nuclear data used in the calculations of spent fuel content, radiation emissions and instrument responses. Nuclear data is an essential part of nuclear fuel burnup and decay codes and nuclear transport codes. Such codes are routinely used for analysis of spent fuel and NDA safeguards instruments. Hence, the uncertainties existing in the nuclear data used in these codes affect the accuracies of such analysis. In addition, nuclear data uncertainties represent the limiting (smallest) uncertainties that can be expected from nuclear code predictions, and therefore define the highest attainable accuracy of the NDA instrument. This work studies the impacts of nuclear data uncertainties on calculated spent fuel nuclide inventories and the associated NDA instrument response. Recently developed methods within the SCALE code system are applied in this study. The Californium Interrogation with Prompt Neutron instrument was selected to illustrate the impact of these uncertainties on NDA instrument response.« less

Impact of Nuclear Data Uncertainties on Calculated Spent Fuel Nuclide Inventories and Advanced NDA Instrument Response

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hu, Jianwei; Gauld, Ian C.

The U.S. Department of Energy’s Next Generation Safeguards Initiative Spent Fuel (NGSI-SF) project is nearing the final phase of developing several advanced nondestructive assay (NDA) instruments designed to measure spent nuclear fuel assemblies for the purpose of improving nuclear safeguards. Current efforts are focusing on calibrating several of these instruments with spent fuel assemblies at two international spent fuel facilities. Modelling and simulation is expected to play an important role in predicting nuclide compositions, neutron and gamma source terms, and instrument responses in order to inform the instrument calibration procedures. As part of NGSI-SF project, this work was carried outmore » to assess the impacts of uncertainties in the nuclear data used in the calculations of spent fuel content, radiation emissions and instrument responses. Nuclear data is an essential part of nuclear fuel burnup and decay codes and nuclear transport codes. Such codes are routinely used for analysis of spent fuel and NDA safeguards instruments. Hence, the uncertainties existing in the nuclear data used in these codes affect the accuracies of such analysis. In addition, nuclear data uncertainties represent the limiting (smallest) uncertainties that can be expected from nuclear code predictions, and therefore define the highest attainable accuracy of the NDA instrument. This work studies the impacts of nuclear data uncertainties on calculated spent fuel nuclide inventories and the associated NDA instrument response. Recently developed methods within the SCALE code system are applied in this study. The Californium Interrogation with Prompt Neutron instrument was selected to illustrate the impact of these uncertainties on NDA instrument response.« less

Model-Based Safety Analysis

NASA Technical Reports Server (NTRS)

Joshi, Anjali; Heimdahl, Mats P. E.; Miller, Steven P.; Whalen, Mike W.

2006-01-01

System safety analysis techniques are well established and are used extensively during the design of safety-critical systems. Despite this, most of the techniques are highly subjective and dependent on the skill of the practitioner. Since these analyses are usually based on an informal system model, it is unlikely that they will be complete, consistent, and error free. In fact, the lack of precise models of the system architecture and its failure modes often forces the safety analysts to devote much of their effort to gathering architectural details about the system behavior from several sources and embedding this information in the safety artifacts such as the fault trees. This report describes Model-Based Safety Analysis, an approach in which the system and safety engineers share a common system model created using a model-based development process. By extending the system model with a fault model as well as relevant portions of the physical system to be controlled, automated support can be provided for much of the safety analysis. We believe that by using a common model for both system and safety engineering and automating parts of the safety analysis, we can both reduce the cost and improve the quality of the safety analysis. Here we present our vision of model-based safety analysis and discuss the advantages and challenges in making this approach practical.

[Organisational responsibility versus individual responsibility: safety culture? About the relationship between patient safety and medical malpractice law].

PubMed

Hart, Dieter

2009-01-01

The contribution is concerned with the correlations between risk information, patient safety, responsibility and liability, in particular in terms of liability law. These correlations have an impact on safety culture in healthcare, which can be evaluated positively if--in addition to good quality of medical care--as many sources of error as possible can be identified, analysed, and minimised or eliminated by corresponding measures (safety or risk management). Liability influences the conduct of individuals and enterprises; safety is (probably) also a function of liability; this should also apply to safety culture. The standard of safety culture does not only depend on individual liability for damages, but first of all on strict enterprise liability (system responsibility) and its preventive effects. Patient safety through quality and risk management is therefore also an organisational programme of considerable relevance in terms of liability law.

A Physical Model of Cosmogenic Nuclide Production in Stony and Iron Meteoroids on the Basis of Simulation Experiments

NASA Astrophysics Data System (ADS)

Leya, I.; Lange, H.-J.; Michel, R.; Meltzow, B.; Herpers, U.; Busemann, H.; Wieler, R.; Dittrich-Hannen, B.; Suter, M.; Kubik, P. W.

1995-09-01

By extending and improving earlier model calculations [1-4] of cosmogenic nuclide production by GCR particles in extraterrestrial matter, we can now present a physical model without free parameters for a consistent description of GCR production rates in stony and iron meteoroids. The model takes explicitely into account p and n-induced reactions. GCR 4He particles are considered only approximately. It is based on depth-size and bulk-chemistry-dependent spectra of primary and secondary protons and of secondary neutrons calculated by HET and MORSE codes within the HERMES code system [5] and on the cross sections of the underlying reactions. Comprehensive and reliable sets of proton cross sections from thresholds up to 2.6 GeV exist now for many cosmogenic nuclides (see [6] for a review). For n-induced reactions the situation is not so good. Only a few data at low energies and practically no data at higher energies exist. GCR production of cosmogenic nuclides in stony meteoroids is already dominated by neutron-induced reactions for most meteoroid radii. In iron meteoroids neutrons are even more important because of the high mass numbers of the bulk and of consequently higher multiplicities for production of secondary neutrons. In order to overcome this problem, the necessary excitation functions of neutron-induced reactions were determined from experimental thick-target production rates by least-squares unfolding procedures using the code STAYS'L [7]. The data were produced in laboratory experiments under completely controlled conditions [8-11]. The unfolding procedure starts from guess functions (from threshold up to 900 MeV) based on all available experimental neutron cross sections and on theoretical ones calculated by the AREL [12] code which is a relativistic version of the hybrid model of pre-equilibrium reactions [13]. With the new neutron cross sections it is possible to describe simultanously all data from the simulation experiments with an accuracy of better

Understanding the role of sleep quality and sleep duration in commercial driving safety.

PubMed

Lemke, Michael K; Apostolopoulos, Yorghos; Hege, Adam; Sönmez, Sevil; Wideman, Laurie

2016-12-01

Long-haul truck drivers in the United States suffer disproportionately high injury rates. Sleep is a critical factor in these outcomes, contributing to fatigue and degrading multiple aspects of safety-relevant performance. Both sleep duration and sleep quality are often compromised among truck drivers; however, much of the efforts to combat fatigue focus on sleep duration rather than sleep quality. Thus, the current study has two objectives: (1) to determine the degree to which sleep impacts safety-relevant performance among long-haul truck drivers; and (2) to evaluate workday and non-workday sleep quality and duration as predictors of drivers' safety-relevant performance. A non-experimental, descriptive, cross-sectional design was employed to collect survey and biometric data from 260 long-haul truck drivers. The Trucker Sleep Disorders Survey was developed to assess sleep duration and quality, the impact of sleep on job performance and accident risk, and other relevant work organization characteristics. Descriptive statistics assessed work organization variables, sleep duration and quality, and frequency of engaging in safety-relevant performance while sleepy. Linear regression analyses were conducted to evaluate relationships between sleep duration, sleep quality, and work organization variables with safety composite variables. Drivers reported long work hours, with over 70% of drivers working more than 11h daily. Drivers also reported a large number of miles driven per week, with an average of 2,812.61 miles per week, and frequent violations of hours-of-service rules, with 43.8% of drivers "sometimes to always" violating the "14-h rule." Sleep duration was longer, and sleep quality was better, on non-workdays compared on workdays. Drivers frequently operated motor vehicles while sleepy, and sleepiness impacted several aspects of safety-relevant performance. Sleep quality was better associated with driving while sleepy and with job performance and concentration

NASA's post-Challenger safety program - Themes and thrusts

NASA Technical Reports Server (NTRS)

Rodney, G. A.

1988-01-01

The range of managerial, technical, and procedural initiatives implemented by NASA's post-Challenger safety program is reviewed. The recommendations made by the Rogers Commission, the NASA post-Challenger review of Shuttle design, the Congressional investigation of the accident, the National Research Council, the Aerospace Safety Advisory Panel, and NASA internal advisory panels and studies are summarized. NASA safety initiatives regarding improved organizational accountability for safety, upgraded analytical techniques and methodologies for risk assessment and management, procedural initiatives in problem reporting and corrective-action tracking, ground processing, maintenance documentation, and improved technologies are discussed. Safety issues relevant to the planned Space Station are examined.

Inhibition of Fear by Learned Safety Signals: minisymposium review

PubMed Central

Fernando, Anushka B. P.; Kazama, Andy M.; Jovanovic, Tanja; Ostroff, Linnaea E.; Sangha, Susan

2012-01-01

Safety signals are learned cues that predict the non-occurrence of an aversive event. As such, safety signals are potent inhibitors of fear and stress responses. Investigations of safety signal learning have increased over the last few years due in part to the finding that traumatized persons are unable to utilize safety cues to inhibit fear, making it a clinically relevant phenotype. The goal of this review is to present recent advances relating to the neural and behavioral mechanisms of safety learning and expression in rodents, non-human primates and humans. PMID:23055481

Towards an International Classification for Patient Safety: key concepts and terms

PubMed Central

Runciman, William; Hibbert, Peter; Thomson, Richard; Van Der Schaaf, Tjerk; Sherman, Heather; Lewalle, Pierre

2009-01-01

Background Understanding the patient safety literature has been compromised by the inconsistent use of language. Objectives To identify key concepts of relevance to the International Patient Safety Classification (ICPS) proposed by the World Alliance For Patient Safety of the World Health Organization (WHO), and agree on definitions and preferred terms. Methods Six principles were agreed upon—that the concepts and terms should: be applicable across the full spectrum of healthcare; be consistent with concepts from other WHO Classifications; have meanings as close as possible to those in colloquial use; convey the appropriate meanings with respect to patient safety; be brief and clear, without unnecessary or redundant qualifiers; be fit-for-purpose for the ICPS. Results Definitions and preferred terms were agreed for 48 concepts of relevance to the ICPS; these were described and the relationships between them and the ICPS were outlined. Conclusions The consistent use of key concepts, definitions and preferred terms should pave the way for better understanding, for comparisons between facilities and jurisdictions, and for trends to be tracked over time. Changes and improvements, translation into other languages and alignment with other sets of patient safety definitions will be necessary. This work represents the start of an ongoing process of progressively improving a common international understanding of terms and concepts relevant to patient safety. PMID:19147597

Proceedings of the Nuclear Criticality Technology Safety Workshop

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rene G. Sanchez

1998-04-01

This document contains summaries of most of the papers presented at the 1995 Nuclear Criticality Technology Safety Project (NCTSP) meeting, which was held May 16 and 17 at San Diego, Ca. The meeting was broken up into seven sessions, which covered the following topics: (1) Criticality Safety of Project Sapphire; (2) Relevant Experiments For Criticality Safety; (3) Interactions with the Former Soviet Union; (4) Misapplications and Limitations of Monte Carlo Methods Directed Toward Criticality Safety Analyses; (5) Monte Carlo Vulnerabilities of Execution and Interpretation; (6) Monte Carlo Vulnerabilities of Representation; and (7) Benchmark Comparisons.

Studies of Itokawa's Surface Exposure by Measurements of Cosmic-ray Produced Nuclides

NASA Technical Reports Server (NTRS)

Caffee, M. W.; Nishiizumi, K.; Tsuchiyama, A.; Uesugi, M.; Zolensky, M. E.

2014-01-01

We plan to investigate the evolutionary history of surface materials from 25143 Itokawa, the Hayabusa samples. Our studies are based on the measurement of nuclides produced in asteroidal surface materials by cosmic rays. Cosmogenic radionuclides are used to determine the duration and nature of the exposure of materials to energetic particles. Our goals are to understand both the fundamental processes on the asteroidal surface and the evolutionary history of its surface materials. They are also key to understanding the history of Itokawa's surface and asteroid-meteoroid evolutionary dynamics. To achieve our key goals, in particular reconstructing the evolutionary histories of the asteroidal surface, we proposed: (1) characterizing Itokawa particles using SXCT, SXRD, and FE-SEM without modification of the sample; (2) embedding each particle in acrylic resin, then slicing a small corner with an ultra-microtome and examining it using super-STEM and SIMS for characterizing surface morphology, space weathering, and oxygen three-isotope analysis; and finally (3) measuring small amounts of cosmogenic radionuclides (104-105 atoms) in Hayabusa samples by AMS. However, we have to modify our plan due to unexpected situation.

An Overview of INEL Fusion Safety R&D Facilities

NASA Astrophysics Data System (ADS)

McCarthy, K. A.; Smolik, G. R.; Anderl, R. A.; Carmack, W. J.; Longhurst, G. R.

1997-06-01

The Fusion Safety Program at the Idaho National Engineering Laboratory has the lead for fusion safety work in the United States. Over the years, we have developed several experimental facilities to provide data for fusion reactor safety analyses. We now have four major experimental facilities that provide data for use in safety assessments. The Steam-Reactivity Measurement System measures hydrogen generation rates and tritium mobilization rates in high-temperature (up to 1200°C) fusion relevant materials exposed to steam. The Volatilization of Activation Product Oxides Reactor Facility provides information on mobilization and transport and chemical reactivity of fusion relevant materials at high temperature (up to 1200°C) in an oxidizing environment (air or steam). The Fusion Aerosol Source Test Facility is a scaled-up version of VAPOR. The ion-implanta-tion/thermal-desorption system is dedicated to research into processes and phenomena associated with the interaction of hydrogen isotopes with fusion materials. In this paper we describe the capabilities of these facilities.

Overview of Design, Lifecycle, and Safety for Computer-Based Systems

NASA Technical Reports Server (NTRS)

Torres-Pomales, Wilfredo

2015-01-01

This document describes the need and justification for the development of a design guide for safety-relevant computer-based systems. This document also makes a contribution toward the design guide by presenting an overview of computer-based systems design, lifecycle, and safety.

Safety-relevant hydrogeological properties of the claystone barrier of a Swiss radioactive waste repository: An evaluation using multiple lines of evidence

NASA Astrophysics Data System (ADS)

Gautschi, Andreas

2017-09-01

In Switzerland, the Opalinus Clay - a Jurassic (Aalenian) claystone formation - has been proposed as the first-priority host rock for a deep geological repository for both low- and intermediate-level and high-level radioactive wastes. An extensive site and host rock investigation programme has been carried out during the past 30 years in Northern Switzerland, comprising extensive 2D and 3D seismic surveys, a series of deep boreholes within and around potential geological siting regions, experiments in the international Mont Terri Rock Laboratory, compilations of data from Opalinus Clay in railway and motorway tunnels and comparisons with similar rocks. The hydrogeological properties of the Opalinus Clay that are relevant from the viewpoint of long-term safety are described and illustrated. The main conclusions are supported by multiple lines of evidence, demonstrating consistency of conclusions based on hydraulic properties, porewater chemistry, distribution of natural tracers across the Opalinus Clay as well as small- and large-scale diffusion models and the derived conceptual understanding of solute transport.

Patient Safety and Quality Improvement Act of 2005.

PubMed

Fassett, William E

2006-05-01

To review Public Law (PL) 109-41-the Patient Safety and Quality Improvement Act of 2005 (PSQIA)-and summarize key medication error research that contributed to congressional recognition of the need for this legislation. Relevant publications related to medication error research, patient safety programs, and the legislative history of and commentary on PL 109-41, published in English, were identified by MEDLINE, PREMEDLINE, Thomas (Library of Congress), and Internet search engine-assisted searches using the terms healthcare quality, medication error, patient safety, PL 109-41, and quality improvement. Additional citations were identified from references cited in related publications. All relevant publications were reviewed. Summarization of the PSQIA was carried out by legal textual analysis. PL 109-41 provides privilege and confidentiality for patient safety work product (PSWP) developed for reporting to patient safety organizations (PSOs). It does not establish federal mandatory reporting of significant errors; rather, it relies on existing state reporting systems. The Act does not preempt stronger state protections for PSWP. The Agency for Healthcare Research and Quality is directed to certify PSOs and promote the establishment of a national network of patient safety databases. Whistleblower protection and penalties for unauthorized disclosure of PSWP are among its enforcement mechanisms. The Act protects clinicians who report minor errors to PSOs and protects the information from disclosure, but providers must increasingly embrace a culture of interdisciplinary concern for patient safety if this protection is to have real impact on patient care.

Middle East food safety perspectives.

PubMed

Idriss, Atef W; El-Habbab, Mohammad S

2014-08-01

Food safety and quality assurance are increasingly a major issue with the globalisation of agricultural trade, on the one hand, and intensification of agriculture, on the other. Consumer protection has become a priority in policy-making amongst the large economies of the Middle East and North Africa (MENA) countries following a number of food safety incidents. To enhance food safety, it is necessary to establish markets underpinned by knowledge and resources, including analysis of international rejections of food products from MENA countries, international laboratory accreditation, improved reporting systems and traceability, continued development and validation of analytical methods, and more work on correlating sensory evaluation with analytical results. MENA countries should develop a national strategy for food safety based on a holistic approach that extends from farm-to-fork and involves all the relevant stakeholders. Accordingly, food safety should be a regional programme, raising awareness among policy- and decision-makers of the importance of food safety and quality for consumer protection, food trade and economic development. © 2014 Society of Chemical Industry.

Scientific evaluation of the safety factor for the acceptable daily intake (ADI). Case study: butylated hydroxyanisole (BHA).

PubMed

Würtzen, G

1993-01-01

The principles of 'data-derived safety factors' are applied to toxicological and biochemical information on butylated hydroxyanisole (BHA). The calculated safety factor for an ADI is, by this method, comparable to the existing internationally recognized safety evaluations. Relevance for humans of forestomach tumours in rodents is discussed. The method provides a basis for organizing data in a way that permits an explicit assessment of its relevance.

Valerian: no evidence for clinically relevant interactions.

PubMed

Kelber, Olaf; Nieber, Karen; Kraft, Karin

2014-01-01

In recent popular publications as well as in widely used information websites directed to cancer patients, valerian is claimed to have a potential of adverse interactions with anticancer drugs. This questions its use as a safe replacement for, for example, benzodiazepines. A review on the interaction potential of preparations from valerian root (Valeriana officinalis L. root) was therefore conducted. A data base search and search in a clinical drug interaction data base were conducted. Thereafter, a systematic assessment of publications was performed. Seven in vitro studies on six CYP 450 isoenzymes, on p-glycoprotein, and on two UGT isoenzymes were identified. However, the methodological assessment of these studies did not support their suitability for the prediction of clinically relevant interactions. In addition, clinical studies on various valerian preparations did not reveal any relevant interaction potential concerning CYP 1A2, 2D6, 2E1, and 3A4. Available animal and human pharmacodynamic studies did not verify any interaction potential. The interaction potential of valerian preparations therefore seems to be low and thereby without clinical relevance. We conclude that there is no specific evidence questioning their safety, also in cancer patients.

Valerian: No Evidence for Clinically Relevant Interactions

PubMed Central

Nieber, Karen; Kraft, Karin

2014-01-01

In recent popular publications as well as in widely used information websites directed to cancer patients, valerian is claimed to have a potential of adverse interactions with anticancer drugs. This questions its use as a safe replacement for, for example, benzodiazepines. A review on the interaction potential of preparations from valerian root (Valeriana officinalis L. root) was therefore conducted. A data base search and search in a clinical drug interaction data base were conducted. Thereafter, a systematic assessment of publications was performed. Seven in vitro studies on six CYP 450 isoenzymes, on p-glycoprotein, and on two UGT isoenzymes were identified. However, the methodological assessment of these studies did not support their suitability for the prediction of clinically relevant interactions. In addition, clinical studies on various valerian preparations did not reveal any relevant interaction potential concerning CYP 1A2, 2D6, 2E1, and 3A4. Available animal and human pharmacodynamic studies did not verify any interaction potential. The interaction potential of valerian preparations therefore seems to be low and thereby without clinical relevance. We conclude that there is no specific evidence questioning their safety, also in cancer patients. PMID:25093031

School Safety: A Collaborative Effort.

ERIC Educational Resources Information Center

ERIC Review, 2000

2000-01-01

The "ERIC Review" announces research results, publications, and new programs relevant to each issue's theme topic. This issue focuses on school safety and violence prevention. An introductory section includes two articles: "How Safe Is My Child's School?" (Kevin Mitchell) and "Making America's Schools Safer" (U.S.…

Brief history of patient safety culture and science.

PubMed

Ilan, Roy; Fowler, Robert

2005-03-01

The science of safety is well established in such disciplines as the automotive and aviation industry. In this brief history of safety science as it pertains to patient care, we review remote and recent publications that have guided the maturation of this field that has particular relevance to the complex structure of systems, personnel, and therapies involved in caring for the critically ill.

The light curve of SN 1987A revisited: constraining production masses of radioactive nuclides

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seitenzahl, Ivo R.; Timmes, F. X.; Magkotsios, Georgios, E-mail: ivo.seitenzahl@anu.edu.au

2014-09-01

We revisit the evidence for the contribution of the long-lived radioactive nuclides {sup 44}Ti, {sup 55}Fe, {sup 56}Co, {sup 57}Co, and {sup 60}Co to the UVOIR light curve of SN 1987A. We show that the V-band luminosity constitutes a roughly constant fraction of the bolometric luminosity between 900 and 1900 days, and we obtain an approximate bolometric light curve out to 4334 days by scaling the late time V-band data by a constant factor where no bolometric light curve data is available. Considering the five most relevant decay chains starting at {sup 44}Ti, {sup 55}Co, {sup 56}Ni, {sup 57}Ni, andmore » {sup 60}Co, we perform a least squares fit to the constructed composite bolometric light curve. For the nickel isotopes, we obtain best fit values of M({sup 56}Ni) = (7.1 ± 0.3) × 10{sup –2} M {sub ☉} and M({sup 57}Ni) = (4.1 ± 1.8) × 10{sup –3} M {sub ☉}. Our best fit {sup 44}Ti mass is M({sup 44}Ti) = (0.55 ± 0.17) × 10{sup –4} M {sub ☉}, which is in disagreement with the much higher (3.1 ± 0.8) × 10{sup –4} M {sub ☉} recently derived from INTEGRAL observations. The associated uncertainties far exceed the best fit values for {sup 55}Co and {sup 60}Co and, as a result, we only give upper limits on the production masses of M({sup 55}Co) < 7.2 × 10{sup –3} M {sub ☉} and M({sup 60}Co) < 1.7 × 10{sup –4} M {sub ☉}. Furthermore, we find that the leptonic channels in the decay of {sup 57}Co (internal conversion and Auger electrons) are a significant contribution and constitute up to 15.5% of the total luminosity. Consideration of the kinetic energy of these electrons is essential in lowering our best fit nickel isotope production ratio to [{sup 57}Ni/{sup 56}Ni] = 2.5 ± 1.1, which is still somewhat high but is in agreement with gamma-ray observations and model predictions.« less

Hazards and hazard combinations relevant for the safety of nuclear power plants

NASA Astrophysics Data System (ADS)

Decker, Kurt; Brinkman, Hans; Raimond, Emmanuel

2017-04-01

The potential of the contemporaneous impact of different, yet causally related, hazardous events and event cascades on nuclear power plants is a major contributor to the overall risk of nuclear installations. In the aftermath of the Fukushima accident, which was caused by a combination of severe ground shaking by an earthquake, an earthquake-triggered tsunami and the disruption of the plants from the electrical grid by a seismically induced landslide, hazard combinations and hazard cascades moved into the focus of nuclear safety research. We therefore developed an exhaustive list of external hazards and hazard combinations which pose potential threats to nuclear installations in the framework of the European project ASAMPSAE (Advanced Safety Assessment: Extended PSA). The project gathers 31 partners from Europe, North Amerika and Japan. The list comprises of exhaustive lists of natural hazards, external man-made hazards, and a cross-correlation matrix of these hazards. The hazard list is regarded comprehensive by including all types of hazards that were previously cited in documents by IAEA, the Western European Nuclear Regulators Association (WENRA), and others. 73 natural hazards and 24 man-made external hazards are included. Natural hazards are grouped into seismotectonic hazards, flooding and hydrological hazards, extreme values of meteorological phenomena, rare meteorological phenomena, biological hazards / infestation, geological hazards, and forest fire / wild fire. The list of external man-made hazards includes industry accidents, military accidents, transportation accidents, pipeline accidents and other man-made external events. The large number of different hazards results in the extremely large number of 5.151 theoretically possible hazard combinations (not considering hazard cascades). In principle all of these combinations are possible to occur by random coincidence except for 82 hazard combinations that - depending on the time scale - are mutually

Re-Educating Jet-Engine-Researchers to Stay Relevant

NASA Astrophysics Data System (ADS)

Gal-Or, Benjamin

2016-06-01

To stay relevantly supported, jet-engine researchers, designers and operators should follow changing uses of small and large jet engines, especially those anticipated to be used by/in the next generation, JET-ENGINE-STEERED ("JES") fleets of jet drones but fewer, JES-Stealth-Fighter/Strike Aircraft. In addition, some diminishing returns from isolated, non-integrating, jet-engine component studies, vs. relevant, supersonic, shock waves control in fluidic-JES-side-effects on compressor stall dynamics within Integrated Propulsion Flight Control ("IPFC"), and/or mechanical JES, constitute key relevant methods that currently move to China, India, South Korea and Japan. The central roles of the jet engine as primary or backup flight controller also constitute key relevant issues, especially under post stall conditions involving induced engine-stress while participating in crash prevention or minimal path-time maneuvers to target. And when proper instructors are absent, self-study of the JES-STVS REVOLUTION is an updating must, where STVS stands for wing-engine-airframe-integrated, embedded stealthy-jet-engine-inlets, restructured engines inside Stealth, Tailless, canard-less, Thrust Vectoring IFPC Systems. Anti-terror and Airliners Super-Flight-Safety are anticipated to overcome US legislation red-tape that obstructs JES-add-on-emergency-kits-use.

An Evaluation of Proposed School Safety Indicators for Georgia.

ERIC Educational Resources Information Center

Todd, Knox H.; Kellermann, Arthur L.; Wald, Marlena; Lipscomb, Leslie; Fajman, Nancy

One of the tasks of the Council for School Performance is to implement measures of school safety to determine the impact of Georgia Lottery for Education expenditures. During the 1994-95 school year, the council pilot-tested several indicators of school safety. This document presents the results of an evaluation that examined the relevance,…

Work Pressure and Safety Behaviors among Health Workers in Ghana: The Moderating Role of Management Commitment to Safety.

PubMed

Amponsah-Tawaih, Kwesi; Adu, Michael Appiah

2016-12-01

safety and healthy working environment has received numerous research attention over the years. Majority of these researches seem to have been conducted in the construction industry, with little attention in the health sector. Nonetheless, there are couple of studies conducted in Africa that suggest pressure in hospitals. Therefore the aim of the study was to examine how pressure influence safety behavior in the hospitals. With reference to the relevance of safety behavior in primary health care delivery, there was the need for the study. Data was obtained from 422 public hospital employees. Respondents were assured that all information would be kept confidential to increase the response rate and acquire more accurate information. Collection of questionnaires from participants took four weeks (20 working days), after which the data was analyzed. The result of the study showed that work pressure correlated negatively with safety behavior. General safety climate significantly correlated positively with safety behavior and negatively with work pressure, although the effect size for the latter was smaller. Hierarchical regression analysis showed management commitment to safety to moderate the relationship between work pressure and safety behavior. When employees perceive safety communication, safety systems and training to be positive, they seem to comply with safety rules and procedures than voluntarily participate in safety activities.

Using Multiple Cosmogenic Nuclides to Investigate Ice Elevation Changes in the Ellsworth Mountains, Antarctica

NASA Astrophysics Data System (ADS)

Marrero, Shasta; Hein, Andy; Sugden, David; Woodward, John; Dunning, Stuart; Freeman, Stewart; Shanks, Richard

2015-04-01

Well-dated geologic data points provide important indicators that can be used for the reconstruction of ice sheet dynamics and as constraints in ice sheet models predicting future change. Cosmogenic nuclides, which accumulate in rocks exposed at the earth's surface, can be used to directly date the exposure age of the rock surfaces that have been created through glacial erosion or deposition. The technique requires a detailed understanding of the local geomorphology as well as awareness of the post-depositional processes that may affect the interpretation of exposure ages. Surface exposure ages (10Be, 26Al, 21Ne, and 36Cl) from local limestone bedrock and other glacially deposited exotic lithologies provide a history spanning from 0 to more than 1 million years in the Patriot, Independence, and Marble Hills in the southern Ellsworth Mountains, Antarctica. Using the new surface exposure ages combined with geomorphological mapping, we will discuss the implications for the glacial history of the southern Ellsworth Mountains.

CosmoCalc: An Excel add-in for cosmogenic nuclide calculations

NASA Astrophysics Data System (ADS)

Vermeesch, Pieter

2007-08-01

As dating methods using Terrestrial Cosmogenic Nuclides (TCN) become more popular, the need arises for a general-purpose and easy-to-use data reduction software. The CosmoCalc Excel add-in calculates TCN production rate scaling factors (using Lal, Stone, Dunai, and Desilets methods); topographic, snow, and self-shielding factors; and exposure ages, erosion rates, and burial ages and visualizes the results on banana-style plots. It uses an internally consistent TCN production equation that is based on the quadruple exponential approach of Granger and Smith (2000). CosmoCalc was designed to be as user-friendly as possible. Although the user interface is extremely simple, the program is also very flexible, and nearly all default parameter values can be changed. To facilitate the comparison of different scaling factors, a set of converter tools is provided, allowing the user to easily convert cut-off rigidities to magnetic inclinations, elevations to atmospheric depths, and so forth. Because it is important to use a consistent set of scaling factors for the sample measurements and the production rate calibration sites, CosmoCalc defines the production rates implicitly, as a function of the original TCN concentrations of the calibration site. The program is best suited for 10Be, 26Al, 3He, and 21Ne calculations, although basic functionality for 36Cl and 14C is also provided. CosmoCalc can be downloaded along with a set of test data from http://cosmocalc.googlepages.com.

PRODUCTION AND RECOIL LOSS OF COSMOGENIC NUCLIDES IN PRESOLAR GRAINS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Trappitsch, Reto; Leya, Ingo, E-mail: trappitsch@uchicago.edu, E-mail: ingo.leya@space.unibe.ch

Presolar grains are small particles that condensed in the vicinity of dying stars. Some of these grains survived the voyage through the interstellar medium (ISM) and were incorporated into meteorite parent bodies at the formation of the Solar System. An important question is when these stellar processes happened, i.e., how long presolar grains were drifting through the ISM. While conventional radiometric dating of such small grains is very difficult, presolar grains are irradiated with galactic cosmic rays (GCRs) in the ISM, which induce the production of cosmogenic nuclides. This opens the possibility to determine cosmic-ray exposure (CRE) ages, i.e., howmore » long presolar grains were irradiated in the ISM. Here, we present a new model for the production and loss of cosmogenic {sup 3}He, {sup 6,7}Li, and {sup 21,22}Ne in presolar SiC grains. The cosmogenic production rates are calculated using a state-of-the-art nuclear cross-section database and a GCR spectrum in the ISM consistent with recent Voyager data. Our findings are that previously measured {sup 3}He and {sup 21}Ne CRE ages agree within the (sometimes large) 2 σ uncertainties and that the CRE ages for most presolar grains are smaller than the predicted survival times. The obtained results are relatively robust since interferences from implanted low-energy GCRs into the presolar SiC grains and/or from cosmogenic production within the meteoroid can be neglected.« less

Evaluating a Website to Teach Children Safety with Dogs: A Randomized Controlled Trial

PubMed Central

Schwebel, David C.; Li, Peng; McClure, Leslie A.; Severson, Joan

2016-01-01

Dog bites represent a significant threat to child health. Theory-driven interventions scalable for broad dissemination are sparse. A website was developed to teach children dog safety via increased knowledge, improved cognitive skills in relevant domains, and increased perception of vulnerability to bites. A randomized controlled trial was conducted with 69 children aged 4–5 randomly assigned to use the dog safety website or a control transportation safety website for ~3 weeks. Assessment of dog safety knowledge and behavior plus skill in three relevant cognitive constructs (impulse control, noticing details, and perspective-taking) was conducted both at baseline and following website use. The dog safety website incorporated interactive games, instructional videos including testimonials, a motivational rewards system, and messaging to parents concerning child lessons. Our results showed that about two-thirds of the intervention sample was not adherent to website use at home, so both intent-to-treat and per-protocol analyses were conducted. Intent-to-treat analyses yielded mostly null results. Per-protocol analyses suggested children compliant to the intervention protocol scored higher on knowledge and recognition of safe behavior with dogs following the intervention compared to the control group. Adherent children also had improved scores post-intervention on the cognitive skill of noticing details compared to the control group. We concluded that young children’s immature cognition can lead to dog bites. Interactive eHealth training on websites shows potential to teach children relevant cognitive and safety skills to reduce risk. Compliance to website use is a challenge, and some relevant cognitive skills (e.g., noticing details) may be more amenable to computer-based training than others (e.g., impulse control). PMID:27918466

Evaluating a Website to Teach Children Safety with Dogs: A Randomized Controlled Trial.

PubMed

Schwebel, David C; Li, Peng; McClure, Leslie A; Severson, Joan

2016-12-02

Dog bites represent a significant threat to child health. Theory-driven interventions scalable for broad dissemination are sparse. A website was developed to teach children dog safety via increased knowledge, improved cognitive skills in relevant domains, and increased perception of vulnerability to bites. A randomized controlled trial was conducted with 69 children aged 4-5 randomly assigned to use the dog safety website or a control transportation safety website for ~3 weeks. Assessment of dog safety knowledge and behavior plus skill in three relevant cognitive constructs (impulse control, noticing details, and perspective-taking) was conducted both at baseline and following website use. The dog safety website incorporated interactive games, instructional videos including testimonials, a motivational rewards system, and messaging to parents concerning child lessons. Our results showed that about two-thirds of the intervention sample was not adherent to website use at home, so both intent-to-treat and per-protocol analyses were conducted. Intent-to-treat analyses yielded mostly null results. Per-protocol analyses suggested children compliant to the intervention protocol scored higher on knowledge and recognition of safe behavior with dogs following the intervention compared to the control group. Adherent children also had improved scores post-intervention on the cognitive skill of noticing details compared to the control group. We concluded that young children's immature cognition can lead to dog bites. Interactive eHealth training on websites shows potential to teach children relevant cognitive and safety skills to reduce risk. Compliance to website use is a challenge, and some relevant cognitive skills (e.g., noticing details) may be more amenable to computer-based training than others (e.g., impulse control).

A novel safety assessment strategy applied to non-selective extracts.

PubMed

Koster, Sander; Leeman, Winfried; Verheij, Elwin; Dutman, Ellen; van Stee, Leo; Nielsen, Lene Munch; Ronsmans, Stefan; Noteborn, Hub; Krul, Lisette

2015-06-01

A main challenge in food safety research is to demonstrate that processing of foodstuffs does not lead to the formation of substances for which the safety upon consumption might be questioned. This is especially so since food is a complex matrix in which the analytical detection of substances, and consequent risk assessment thereof, is difficult to determine. Here, a pragmatic novel safety assessment strategy is applied to the production of non-selective extracts (NSEs), used for different purposes in food such as for colouring purposes, which are complex food mixtures prepared from reference juices. The Complex Mixture Safety Assessment Strategy (CoMSAS) is an exposure driven approach enabling to efficiently assess the safety of the NSE by focussing on newly formed substances or substances that may increase in exposure during the processing of the NSE. CoMSAS enables to distinguish toxicologically relevant from toxicologically less relevant substances, when related to their respective levels of exposure. This will reduce the amount of work needed for identification, characterisation and safety assessment of unknown substances detected at low concentration, without the need for toxicity testing using animal studies. In this paper, the CoMSAS approach has been applied for elderberry and pumpkin NSEs used for food colouring purposes. Copyright © 2015 Elsevier Ltd. All rights reserved.

33 CFR 96.250 - What documents and reports must a safety management system have?

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Safety management system document and data maintenance (1) Procedures which establish and maintain control of all documents and data relevant to the safety management system. (2) Documents are available at... safety management system have? 96.250 Section 96.250 Navigation and Navigable Waters COAST GUARD...

Microbicide safety/efficacy studies in animals: macaques and small animal models.

PubMed

Veazey, Ronald S

2008-09-01

A number of microbicide candidates have failed to prevent HIV transmission in human clinical trials, and there is uncertainty as to how many additional trials can be supported by the field. Regardless, there are far too many microbicide candidates in development, and a logical and consistent method for screening and selecting candidates for human clinical trials is desperately needed. The unique host and cell specificity of HIV, however, provides challenges for microbicide safety and efficacy screening, that can only be addressed by rigorous testing in relevant laboratory animal models. A number of laboratory animal model systems ranging from rodents to nonhuman primates, and single versus multiple dose challenges have recently been developed to test microbicide candidates. These models have shed light on both the safety and efficacy of candidate microbicides as well as the early mechanisms involved in transmission. This article summarizes the major advantages and disadvantages of the relevant animal models for microbicide safety and efficacy testing. Currently, nonhuman primates are the only relevant and effective laboratory model for screening microbicide candidates. Given the consistent failures of prior strategies, it is now clear that rigorous safety and efficacy testing in nonhuman primates should be a prerequisite for advancing additional microbicide candidates to human clinical trials.

Microbicide Safety/Efficacy studies in animals -macaques and small animal models

PubMed Central

Veazey, Ronald S.

2009-01-01

Purpose of review A number of microbicide candidates have failed to prevent HIV transmission in human clinical trials, and there is uncertainty as to how many additional trials can be supported by the field. Regardless, there are far too many microbicide candidates in development, and a logical and consistent method for screening and selecting candidates for human clinical trials is desperately needed. However, the unique host and cell specificity of HIV provides challenges for microbicide safety and efficacy screening, that can only be addressed by rigorous testing in relevant laboratory animal models. Recent findings A number of laboratory animal model systems ranging from rodents to nonhuman primates, and single versus multiple dose challenges have recently been developed to test microbicide candidates. These models have shed light on both the safety and efficacy of candidate microbicides as well as the early mechanisms involved in transmission. This article summarizes the major advantages and disadvantages of the relevant animal models for microbicide safety and efficacy testing. Summary Currently, nonhuman primates are the only relevant and effective laboratory model for screening microbicide candidates. Given the consistent failures of prior strategies, it is now clear that rigorous safety and efficacy testing in nonhuman primates should be a pre-requisite for advancing additional microbicide candidates to human clinical trials. PMID:19373023

Support from Afar: Using Chemical Safety Information on the Internet.

ERIC Educational Resources Information Center

Stuart, Ralph

One of the major challenges facing people committed to Teaching Safety in High Schools, Colleges, and Universities is keeping up with both the wide range of relevant technical information about potential hazards (ranging from fire protection to chemical hazards to biological issues) and the ever-changing world of safety regulations and standards.…

Determining an appropriate integrated assessment model of tourism safety risk within the Changbai Mountain Scenic Area

NASA Astrophysics Data System (ADS)

Zhou, Lijun; Liu, Jisheng

2017-03-01

Tourism safety is gradually gaining more attention due to the rapid development of the tourism industry in China. Changbai Mountain is one of the most famous mountainous scenic areas in Northeast Asia. Assessment on Changbai Mountain scenic area’s tourism safety risk could do a favor in detecting influence factor of tourism safety risk and classifying tourism safety risk rank, thereby reducing and preventing associated tourism safety risks. This paper uses the Changbai Mountain scenic area as the study subject. By the means of experts scoring and analytic hierarchy process on quantified relevant evaluation indicator, the grid GIS method is used to vectorize the relevant data within a 1000m grid. It respectively analyzes main indicators associated tourism safety risk in Changbai Mountain scenic area, including hazard, exposure, vulnerability and ability to prevent and mitigate disasters. The integrated tourism safety risk model is used to comprehensively evaluate tourism safety risk in Changbai Mountain scenic area.

Safety climate and firefighting: Focus group results.

PubMed

DeJoy, David M; Smith, Todd D; Dyal, Mari-Amanda

2017-09-01

Firefighting is a hazardous occupation and there have been numerous calls for fundamental changes in how fire service organizations approach safety and balance safety with other operational priorities. These calls, however, have yielded little systematic research. As part of a larger project to develop and test a model of safety climate for the fire service, focus groups were used to identify potentially important dimensions of safety climate pertinent to firefighting. Analyses revealed nine overarching themes. Competency/professionalism, physical/psychological readiness, and that positive traits sometimes produce negative consequences were themes at the individual level; cohesion and supervisor leadership/support at the workgroup level; and politics/bureaucracy, resources, leadership, and hiring/promotion at the organizational level. A multi-level perspective seems appropriate for examining safety climate in firefighting. Safety climate in firefighting appears to be multi-dimensional and some dimensions prominent in the general safety climate literature also seem relevant to firefighting. These results also suggest that the fire service may be undergoing transitions encompassing mission, personnel, and its fundamental approach to safety and risk. These results help point the way to the development of safety climate measures specific to firefighting and to interventions for improving safety performance. Copyright © 2017 National Safety Council and Elsevier Ltd. All rights reserved.

An immunologically relevant rodent model demonstrates safety of therapy using a tumour-specific IgE.

PubMed

Josephs, Debra H; Nakamura, Mano; Bax, Heather J; Dodev, Tihomir S; Muirhead, Gareth; Saul, Louise; Karagiannis, Panagiotis; Ilieva, Kristina M; Crescioli, Silvia; Gazinska, Patrycja; Woodman, Natalie; Lomardelli, Cristina; Kareemaghay, Sedigeh; Selkirk, Christopher; Lentfer, Heike; Barton, Claire; Canevari, Silvana; Figini, Mariangela; Downes, Noel; Dombrowicz, David; Corrigan, Christopher J; Nestle, Frank O; Jones, Paul S; Gould, Hannah J; Blower, Philip J; Tsoka, Sophia; Spicer, James F; Karagiannis, Sophia N

2018-04-13

Designing biologically informative models for assessing the safety of novel agents, especially for cancer immunotherapy, carries substantial challenges. The choice of an in vivo system for studies on IgE antibodies represents a major impediment to their clinical translation, especially with respect to class-specific immunological functions and safety. Fcε receptor expression and structure are different in humans and mice, so that the murine system is not informative when studying human IgE biology. By contrast, FcεRI expression and cellular distribution in rats mirrors that of humans. We are developing MOv18 IgE, a human chimeric antibody recognizing the tumour-associated antigen folate receptor alpha. We created an immunologically congruent surrogate rat model likely to recapitulate human IgE-FcεR interactions, and engineered a surrogate rat IgE equivalent to MOv18. Employing this model, we examined in vivo safety and efficacy of anti-tumour IgE antibodies. In immunocompetent rats, rodent IgE restricted growth of syngeneic tumours in the absence of clinical, histopathological or metabolic signs associated with obvious toxicity. No physiological or immunological evidence of a 'cytokine-storm' or allergic response was seen, even at 50 mg/kg weekly doses. IgE treatment was associated with elevated serum concentrations of TNFα, a mediator previously linked with IgE-mediated anti-tumour and anti-parasitic functions, alongside evidence of substantially elevated tumoural immune cell infiltration and immunological pathway activation in tumour-bearing lungs. Our findings indicate safety of MOv18 IgE, in conjunction with efficacy and immune activation, supporting the translation of this therapeutic approach to the clinical arena. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Informatics for patient safety: a nursing research perspective.

PubMed

Bakken, Suzanne

2006-01-01

In Crossing the Quality Chasm, the Institute of Medicine (IOM) Committee on Quality of Health Care in America identified the critical role of information technology in designing a health system that produces care that is "safe, effective, patient-centered, timely, efficient, and equitable" (Committee on Quality of Health Care in America, 2001, p. 164). A subsequent IOM report contends that improved information systems are essential to a new health care delivery system that "both prevents errors and learns from them when they occur" (Committee on Data Standards for Patient Safety, 2004, p. 1). This review specifically highlights the role of informatics processes and information technology in promoting patient safety and summarizes relevant nursing research. First, the components of an informatics infrastructure for patient safety are described within the context of the national framework for delivering consumer-centric and information-rich health care and using the National Health Information Infrastructure (NHII) (Thompson & Brailer, 2004). Second, relevant nursing research is summarized; this includes research studies that contributed to the development of selected infrastructure components as well as studies specifically focused on patient safety. Third, knowledge gaps and opportunities for nursing research are identified for each main topic. The health information technologies deployed as part of the national framework must support nursing practice in a manner that enables prevention of medical errors and promotion of patient safety and contributes to the development of practice-based nursing knowledge as well as best practices for patient safety. The seminal work that has been completed to date is necessary, but not sufficient, to achieve this objective.

Safety intelligence: an exploration of senior managers' characteristics.

PubMed

Fruhen, L S; Mearns, K J; Flin, R; Kirwan, B

2014-07-01

Senior managers can have a strong influence on organisational safety. But little is known about which of their personal attributes support their impact on safety. In this paper, we introduce the concept of 'safety intelligence' as related to senior managers' ability to develop and enact safety policies and explore possible characteristics related to it in two studies. Study 1 (N = 76) involved direct reports to chief executive officers (CEOs) of European air traffic management (ATM) organisations, who completed a short questionnaire asking about characteristics and behaviours that are ideal for a CEO's influence on safety. Study 2 involved senior ATM managers (N = 9) in various positions in interviews concerning their day-to-day work on safety. Both studies indicated six attributes of senior managers as relevant for their safety intelligence, particularly, social competence and safety knowledge, followed by motivation, problem-solving, personality and interpersonal leadership skills. These results have recently been applied in guidance for safety management practices in a White Paper published by EUROCONTROL. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Dependence of nuclear quadrupole resonance transitions on the electric field gradient asymmetry parameter for nuclides with half-integer spins

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cho, Herman

2016-09-01

Allowed transition energies and eigenstate expansions have been calculated and tabulated in numerical form as functions of the electric field gradient asymmetry parameter for the zero field Hamiltonian of quadrupolar nuclides with I = 3/2, 5/2, 7/2, and 9/2. These results may be used to interpret nuclear quadrupole resonance (NQR) spectra and extract accurate values of the electric field gradient tensors. Applications of NQR methods to studies of electronic structure in heavy element systems are proposed. This material is based upon work supported by the U.S. Department of Energy Office of Science, Office of Basic Energy Sciences, Heavy Element Chemistrymore » program.« less

Designing Serious Games for Safety Education: "Learn to Brace" versus Traditional Pictorials for Aircraft Passengers.

PubMed

Chittaro, Luca

2016-05-01

Serious games for safety education (SGSE) are a novel tool for preparing people to prevent and\\or handle risky situations. Although several SGSE have been developed, design and evaluation methods for SGSE need to be better grounded in and guided by safety-relevant psychological theories. In particular, this paper focuses on threat appeals and the assessment of variables, such as safety locus of control, that influence human behavior in real risky situations. It illustrates how we took into account such models in the design and evaluation of "Learn to Brace", a first-of-its-kind serious game that deals with a major problem in aviation safety, i.e. the scarce effectiveness of the safety cards used by airlines. The study considered a sample of 48 users: half of them received instructions about the brace position through the serious game, the other half through a traditional safety card pictorial. Results showed that the serious game was much more effective than the traditional instructions both in terms of learning and of changing safety-relevant perceptions, especially safety locus of control and recommendation perception.

Skill acquisition while operating in-vehicle information systems: interface design determines the level of safety-relevant distractions.

PubMed

Jahn, Georg; Krems, Josef F; Gelau, Christhard

2009-04-01

This study tested whether the ease of learning to use human-machine interfaces of in-vehicle information systems (IVIS) can be assessed at standstill. Assessing the attentional demand of IVIS should include an evaluation of ease of learning, because the use of IVIS at low skill levels may create safety-relevant distractions. Skill acquisition in operating IVIS was quantified by fitting the power law of practice to training data sets collected in a driving study and at standstill. Participants practiced manual destination entry with two route guidance systems differing in cognitive demand. In Experiment 1, a sample of middle-aged participants was trained while steering routes of varying driving demands. In Experiment 2, another sample of middle-aged participants was trained at standstill. In Experiment 1, display glance times were less affected by driving demands than by total task times and decreased at slightly higher speed-up rates (0.02 higher on average) than task times collected at standstill in Experiment 2. The system interface that minimized cognitive demand was operated more quickly and was easier to learn. Its system delays increased static task times, which still predicted 58% of variance in display glance times compared with even 76% for the second system. The ease of learning to use an IVIS interface and the decrease in attentional demand with training can be assessed at standstill. Fitting the power law of practice to static task times yields parameters that predict display glance times while driving, which makes it possible to compare interfaces with regard to ease of learning.

Impact of nuclear data on sodium-cooled fast reactor calculations

NASA Astrophysics Data System (ADS)

Aures, Alexander; Bostelmann, Friederike; Zwermann, Winfried; Velkov, Kiril

2016-03-01

Neutron transport and depletion calculations are performed in combination with various nuclear data libraries in order to assess the impact of nuclear data on safety-relevant parameters of sodium-cooled fast reactors. These calculations are supplemented by systematic uncertainty analyses with respect to nuclear data. Analysed quantities are the multiplication factor and nuclide densities as a function of burn-up and the Doppler and Na-void reactivity coefficients at begin of cycle. While ENDF/B-VII.0 / -VII.1 yield rather consistent results, larger discrepancies are observed between the JEFF libraries. While the newest evaluation, JEFF-3.2, agrees with the ENDF/B-VII libraries, the JEFF-3.1.2 library yields significant larger multiplication factors.

Model-Driven Development of Safety Architectures

NASA Technical Reports Server (NTRS)

Denney, Ewen; Pai, Ganesh; Whiteside, Iain

2017-01-01

We describe the use of model-driven development for safety assurance of a pioneering NASA flight operation involving a fleet of small unmanned aircraft systems (sUAS) flying beyond visual line of sight. The central idea is to develop a safety architecture that provides the basis for risk assessment and visualization within a safety case, the formal justification of acceptable safety required by the aviation regulatory authority. A safety architecture is composed from a collection of bow tie diagrams (BTDs), a practical approach to manage safety risk by linking the identified hazards to the appropriate mitigation measures. The safety justification for a given unmanned aircraft system (UAS) operation can have many related BTDs. In practice, however, each BTD is independently developed, which poses challenges with respect to incremental development, maintaining consistency across different safety artifacts when changes occur, and in extracting and presenting stakeholder specific information relevant for decision making. We show how a safety architecture reconciles the various BTDs of a system, and, collectively, provide an overarching picture of system safety, by considering them as views of a unified model. We also show how it enables model-driven development of BTDs, replete with validations, transformations, and a range of views. Our approach, which we have implemented in our toolset, AdvoCATE, is illustrated with a running example drawn from a real UAS safety case. The models and some of the innovations described here were instrumental in successfully obtaining regulatory flight approval.

Traffic Safety Messages on Dynamic Message Signs (DMS)

DOT National Transportation Integrated Search

2018-05-01

This technical assistance report investigated the existing state of practice across the nation for placing safety campaign messages on dynamic message signs (DMS) and reviewed relevant studies that documented any evidence of effectiveness in influenc...

Cosmogenic nuclide age estimate for Laurentide Ice Sheet recession from the terminal moraine, New Jersey, USA, and constraints on latest Pleistocene ice sheet history

USGS Publications Warehouse

Corbett, Lee B.; Bierman, Paul R.; Stone, Byron D.; Caffee, Marc W.; Larsen, Patrick L.

2017-01-01

The time at which the Laurentide Ice Sheet reached its maximum extent and subsequently retreated from its terminal moraine in New Jersey has been constrained by bracketing radiocarbon ages on preglacial and postglacial sediments. Here, we present measurements of in situ produced 10Be and 26Al in 16 quartz-bearing samples collected from bedrock outcrops and glacial erratics just north of the terminal moraine in north-central New Jersey; as such, our ages represent a minimum limit on the timing of ice recession from the moraine. The data set includes field and laboratory replicates, as well as replication of the entire data set five years after initial measurement. We find that recession of the Laurentide Ice Sheet from the terminal moraine in New Jersey began before 25.2±2.1 ka (10Be, n=16, average, 1 standard deviation). This cosmogenic nuclide exposure age is consistent with existing limiting radiocarbon ages in the study area and cosmogenic nuclide exposure ages from the terminal moraine on Martha’s Vineyard ~300 km to the northeast. The age we propose for Laurentide Ice Sheet retreat from the New Jersey terminal position is broadly consistent with regional and global climate records of the last glacial maximum termination and records of fluvial incision.

Biomedically relevant chemical and physical properties of coal combustion products.

PubMed Central

Fisher, G L

1983-01-01

The evaluation of the potential public and occupational health hazards of developing and existing combustion processes requires a detailed understanding of the physical and chemical properties of effluents available for human and environmental exposures. These processes produce complex mixtures of gases and aerosols which may interact synergistically or antagonistically with biological systems. Because of the physicochemical complexity of the effluents, the biomedically relevant properties of these materials must be carefully assessed. Subsequent to release from combustion sources, environmental interactions further complicate assessment of the toxicity of combustion products. This report provides an overview of the biomedically relevant physical and chemical properties of coal fly ash. Coal fly ash is presented as a model complex mixture for health and safety evaluation of combustion processes. PMID:6337824

Systems pharmacology augments drug safety surveillance

PubMed Central

Lorberbaum, Tal; Nasir, Mavra; Keiser, Michael J.; Vilar, Santiago; Hripcsak, George; Tatonetti, Nicholas P.

2014-01-01

Small molecule drugs are the foundation of modern medical practice yet their use is limited by the onset of unexpected and severe adverse events (AEs). Regulatory agencies rely on post-marketing surveillance to monitor safety once drugs are approved for clinical use. Despite advances in pharmacovigilance methods that address issues of confounding bias, clinical data of AEs are inherently noisy. Systems pharmacology– the integration of systems biology and chemical genomics – can illuminate drug mechanisms of action. We hypothesize that these data can improve drug safety surveillance by highlighting drugs with a mechanistic connection to the target phenotype (enriching true positives) and filtering those that do not (depleting false positives). We present an algorithm, the modular assembly of drug safety subnetworks (MADSS), to combine systems pharmacology and pharmacovigilance data and significantly improve drug safety monitoring for four clinically relevant adverse drug reactions. PMID:25670520

NASA aviation safety reporting system

NASA Technical Reports Server (NTRS)

Billings, C. E.; Lauber, J. K.; Funkhouser, H.; Lyman, E. G.; Huff, E. M.

1976-01-01

The origins and development of the NASA Aviation Safety Reporting System (ASRS) are briefly reviewed. The results of the first quarter's activity are summarized and discussed. Examples are given of bulletins describing potential air safety hazards, and the disposition of these bulletins. During the first quarter of operation, the ASRS received 1464 reports; 1407 provided data relevant to air safety. All reports are being processed for entry into the ASRS data base. During the reporting period, 130 alert bulletins describing possible problems in the aviation system were generated and disseminated. Responses were received from FAA and others regarding 108 of the alert bulletins. Action was being taken with respect to 70 of the 108 responses received. Further studies are planned of a number of areas, including human factors problems related to automation of the ground and airborne portions of the national aviation system.

The International Safety Framework for nuclear power source applications in outer space-Useful and substantial guidance

NASA Astrophysics Data System (ADS)

Summerer, L.; Wilcox, R. E.; Bechtel, R.; Harbison, S.

2015-06-01

In 2009, the International Safety Framework for Nuclear Power Source Applications in Outer Space was adopted, following a multi-year process that involved all major space faring nations under the auspices of a partnership between the UN Committee on the Peaceful Uses of Outer Space and the International Atomic Energy Agency. The Safety Framework reflects an international consensus on best practices to achieve safety. Following the 1992 UN Principles Relevant to the Use of Nuclear Power Sources in Outer Space, it is the second attempt by the international community to draft guidance promoting the safety of applications of nuclear power sources in space missions. NPS applications in space have unique safety considerations compared with terrestrial applications. Mission launch and outer space operational requirements impose size, mass and other space environment limitations not present for many terrestrial nuclear facilities. Potential accident conditions could expose nuclear power sources to extreme physical conditions. The Safety Framework is structured to provide guidance for both the programmatic and technical aspects of safety. In addition to sections containing specific guidance for governments and for management, it contains technical guidance pertinent to the design, development and all mission phases of space NPS applications. All sections of the Safety Framework contain elements directly relevant to engineers and space mission designers for missions involving space nuclear power sources. The challenge for organisations and engineers involved in the design and development processes of space nuclear power sources and applications is to implement the guidance provided in the Safety Framework by integrating it into the existing standard space mission infrastructure of design, development and operational requirements, practices and processes. This adds complexity to the standard space mission and launch approval processes. The Safety Framework is deliberately

Drug safety evaluation of defibrotide.

PubMed

Richardson, Paul G; Corbacioglu, Selim; Ho, Vincent Trien-Vinh; Kernan, Nancy A; Lehmann, Leslie; Maguire, Craig; Maglio, Michelle; Hoyle, Margaret; Sardella, Marco; Giralt, Sergio; Holler, Ernst; Carreras, Enric; Niederwieser, Dietger; Soiffer, Robert

2013-01-01

Hepatic veno-occlusive disease (VOD), also known as sinusoidal obstruction syndrome (SOS), is a potentially life-threatening complication of chemotherapeutic conditioning used in preparation for hematopoietic stem-cell transplantation (SCT). Defibrotide (DF) has been shown in Phase II and III trials to improve complete response in patients with severe VOD (sVOD). None of the articles, to date, provide a comprehensive review of the safety of DF in VOD and/or a range of other conditions. This article reviews current clinical findings on DF, primarily in terms of safety for use in treatment and prophylaxis of VOD, and relevant safety data for its use in other diseases. The literature review was conducted using a PubMed search with the fixed term 'defibrotide' in combination with ≥ 1 of 'safety', 'veno-occlusive disease' (with and without 'treatment', 'prevention'), 'oncology', 'myeloma', 'microangiopathy', 'anti-thrombotic' and 'peripheral vascular disorder'. Related articles from the EBMT and ASH conference websites were also included. DF was well tolerated in majority of the studies. The safety profile of DF is largely favourable with toxicities comparable to control populations in the setting of SCT complicated by sVOD.

Potential of monitoring nuclides with the epiphyte Tillandsia usneoides: Uptake and localization of 133Cs.

PubMed

Li, Peng; Zheng, Guiling; Chen, Xuan; Pemberton, Robert

2012-12-01

Epiphytic Tillandsia plants are efficient air pollution biomonitors and traditionally used to monitor atmospheric heavy metal pollution, but rarely nuclides monitoring. Here we evaluated the potential of Tillandsia usneoides for monitoring (133)Cs and investigated if Cs was trapped by the plant external surface structures. The results showed that T. usneoides was able to survive relatively high Cs stress. With the increase of Cs solution concentration, the total of Cs in plants increased significantly, which suggests that the plants could accumulate Cs quickly and effectively. Therefore, T. usneoides has considerable potential for monitoring Cs polluted environments. In addition, scanning electron microscopy (SEM) and energy dispersive spectrometer (EDS) analysis showed that Cs was detected in each type of cells in foliar trichomes, and the ratio of Cs in the internal disc cell was higher than that in ring cell and wing cell, which indicates that the mechanism of adsorption Cs in Tillandsia has an active component. Copyright © 2012. Published by Elsevier Inc.

Screening Electronic Health Record-Related Patient Safety Reports Using Machine Learning.

PubMed

Marella, William M; Sparnon, Erin; Finley, Edward

2017-03-01

The objective of this study was to develop a semiautomated approach to screening cases that describe hazards associated with the electronic health record (EHR) from a mandatory, population-based patient safety reporting system. Potentially relevant cases were identified through a query of the Pennsylvania Patient Safety Reporting System. A random sample of cases were manually screened for relevance and divided into training, testing, and validation data sets to develop a machine learning model. This model was used to automate screening of remaining potentially relevant cases. Of the 4 algorithms tested, a naive Bayes kernel performed best, with an area under the receiver operating characteristic curve of 0.927 ± 0.023, accuracy of 0.855 ± 0.033, and F score of 0.877 ± 0.027. The machine learning model and text mining approach described here are useful tools for identifying and analyzing adverse event and near-miss reports. Although reporting systems are beginning to incorporate structured fields on health information technology and the EHR, these methods can identify related events that reporters classify in other ways. These methods can facilitate analysis of legacy safety reports by retrieving health information technology-related and EHR-related events from databases without fields and controlled values focused on this subject and distinguishing them from reports in which the EHR is mentioned only in passing. Machine learning and text mining are useful additions to the patient safety toolkit and can be used to semiautomate screening and analysis of unstructured text in safety reports from frontline staff.

Biomedical and environmental aspects of the thorium fuel cycle: a selected, annotated bibliography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Faust, R.A.; Fore, C.S.; Cone, M.V.

1979-07-01

This bibliography was compiled to assist in the evaluation of the health and environmental consequences of high specific activity thorium and related nuclides which could be released to the environment by activities related to the Thorium Fuel Cycle. The general scope covers studies regarding potential releases, environmental transport, metabolism, dosimetry, dose assessment, and overall risk assessment for radionuclides specific to the NASAP project. This publication of 740 abstracted references highlights the biological and medical aspects of thorium 228 and thorium 232 in man and animals. Similar studies on related nuclides such as radium 224, radium 226, radium 228, and thoriummore » 230 are also emphasized. Additional categories relevant to these radionuclides are included as follows: chemical analysis; ecological aspects; energy; geological aspects; instrumentation; legal and political aspects; monitoring, measurement and analysis; physical aspects; production; radiation safety and control; and waste disposal and management. Environmental assessment and sources categories were used for entries which contain a multiple use of categories. Leading authors appear alphabetically within each category. Indexes are provided for : author(s), geographic location, keywords, title, and publication description. The bibliography contains literature dating from December 1925 to February 1978.« less

Search for unbound nuclides and beam/fragment optics with the MoNA/LISA segmented target at NSCL

NASA Astrophysics Data System (ADS)

Gueye, Paul; Frank, Nathan; Thoennessen, Michael; Redpath, Thomas; MoNA Collaboration

2017-09-01

A multi-layered Si/Be segmented target consisting of three 700 mg/cm2 thick Be9 slabs and four 140 microns Si detectors was used by the MoNA Collaboration at the National Superconducting Cyclotron Laboratory of Michigan State University to study the O26 lifetime. This target provides unprecedented information on the incident beams and fragments (energy loss and position), thus allowing for better determination of the incident and outgoing energies and momenta of the detected particles compare to previous experiments conducted at this facility. With the availability of a newly developed Geant4 Monte Carlo simulation of the full N2 vault, we will present and discuss the performances of this target. Search for unbound nuclides and beam/fragment optics with the MoNA/LISA segmented target at NSCL.

Investigational new drug safety reporting requirements for human drug and biological products and safety reporting requirements for bioavailability and bioequivalence studies in humans. Final rule.

PubMed

2010-09-29

The Food and Drug Administration (FDA) is amending its regulations governing safety reporting requirements for human drug and biological products subject to an investigational new drug application (IND). The final rule codifies the agency's expectations for timely review, evaluation, and submission of relevant and useful safety information and implements internationally harmonized definitions and reporting standards. The revisions will improve the utility of IND safety reports, reduce the number of reports that do not contribute in a meaningful way to the developing safety profile of the drug, expedite FDA's review of critical safety information, better protect human subjects enrolled in clinical trials, subject bioavailability and bioequivalence studies to safety reporting requirements, promote a consistent approach to safety reporting internationally, and enable the agency to better protect and promote public health.

Teamwork, organizational learning, patient safety and job outcomes.

PubMed

Goh, Swee C; Chan, Christopher; Kuziemsky, Craig

2013-01-01

This article aims to encourage healthcare administrators to consider the learning organization concept and foster collaborative learning among teams in their attempt to improve patient safety. Relevant healthcare, organizational behavior and human resource management literature was reviewed. A patient safety culture, fostered by healthcare leaders, should include an organizational culture that encourages collaborative learning, replaces the blame culture, prioritizes patient safety and rewards individuals who identify serious mistakes. As healthcare institution staffs are being asked to deliver more complex medical services with fewer resources, there is a need to understand how hospital staff can learn from other organizational settings, especially the non-healthcare sectors. The paper provides suggestions for improving patient safety which are drawn from the health and business management literature.

21 CFR 601.35 - Evaluation of safety.

Code of Federal Regulations, 2010 CFR

2010-04-01

... established, low-risk profile). Upon reviewing the relevant product characteristics and safety information..., carrier, or ligand; (3) The risks of an incorrect diagnostic determination; (4) The adverse reaction profile of the drug; (5) Results of human experience with the radiopharmaceutical for other uses; and (6...

Why System Safety Professionals Should Read Accident Reports

NASA Technical Reports Server (NTRS)

Holloway, C. M.; Johnson, C. W.

2006-01-01

System safety professionals, both researchers and practitioners, who regularly read accident reports reap important benefits. These benefits include an improved ability to separate myths from reality, including both myths about specific accidents and ones concerning accidents in general; an increased understanding of the consequences of unlikely events, which can help inform future designs; a greater recognition of the limits of mathematical models; and guidance on potentially relevant research directions that may contribute to safety improvements in future systems.

Food Safety at Farmers' Markets: A Knowledge Synthesis of Published Research.

PubMed

Young, Ian; Thaivalappil, Abhinand; Reimer, Danielle; Greig, Judy

2017-12-01

Farmers' markets are increasingly popular venues in North America for the sale of fresh produce and other foods. However, the nature of their operation can present possible food safety issues, challenges, and risks to consumers. A knowledge synthesis was conducted to identify, characterize, and summarize published research on the microbial food safety issues and implications associated with farmers' markets. A scoping review was conducted using the following steps: comprehensive search strategy, relevance screening of abstracts, and characterization of relevant articles. Two subsets of data were prioritized for more detailed systematic review (data extraction and risk-of-bias assessment) and meta-analysis: (i) studies comparing the microbial safety of foods from farmers' markets versus other sources and (ii) studies evaluating the use of food safety practices at farmers' markets. Overall, 83 relevant studies were identified. The majority of studies were published as journal articles (64%), used a cross-sectional design (81%), and were conducted in the United States (78%). Most studies (39%; n = 32) investigated stakeholder, mostly consumer (n = 22), attitudes toward food safety at farmers' markets. Limited but heterogeneous evidence indicated a higher prevalence of Campylobacter and Salmonella in chicken meat from farmers' markets versus other retail sources, but there was no difference in the microbial contamination of fresh produce. Studies evaluating the use of food safety practices at farmers' markets identified some gaps; for example, the average prevalence of vendor hand washing was 4% (95% confidence interval: 0 to 11%; I 2 = 27%; n = 5 studies). Twelve foodborne outbreaks and case reports were identified, resulting in a total of 411 illnesses, 38 hospitalizations, and two deaths from 1994 to 2016. Only five intervention studies were identified. Key knowledge gaps and areas warranting future research, training, and education are highlighted and discussed.

DOE/DOE Tight Oil Flammability & Transportation Spill Safety

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lord, David L.

2014-12-01

This presentation describes crude oils, their phase behavior, the SPR vapor pressure program, and presents data comparisons from various analytical techniques. The overall objective is to describe physical properties of crude oil relevant to flammability and transport safety

Interpreting the biological relevance of bioinformatic analyses with T-DNA sequence for protein allergenicity.

PubMed

Harper, B; McClain, S; Ganko, E W

2012-08-01

Global regulatory agencies require bioinformatic sequence analysis as part of their safety evaluation for transgenic crops. Analysis typically focuses on encoded proteins and adjacent endogenous flanking sequences. Recently, regulatory expectations have expanded to include all reading frames of the inserted DNA. The intent is to provide biologically relevant results that can be used in the overall assessment of safety. This paper evaluates the relevance of assessing the allergenic potential of all DNA reading frames found in common food genes using methods considered for the analysis of T-DNA sequences used in transgenic crops. FASTA and BLASTX algorithms were used to compare genes from maize, rice, soybean, cucumber, melon, watermelon, and tomato using international regulatory guidance. Results show that BLASTX for maize yielded 7254 alignments that exceeded allergen similarity thresholds and 210,772 alignments that matched eight or more consecutive amino acids with an allergen; other crops produced similar results. This analysis suggests that each nontransgenic crop has a much greater potential for allergenic risk than what has been observed clinically. We demonstrate that a meaningful safety assessment is unlikely to be provided by using methods with inherently high frequencies of false positive alignments when broadly applied to all reading frames of DNA sequence. Copyright © 2012 Elsevier Inc. All rights reserved.

Research on station management in subway operation safety

NASA Astrophysics Data System (ADS)

Li, Yiman

2017-10-01

The management of subway station is an important part of the safe operation of urban subway. In order to ensure the safety of subway operation, it is necessary to study the relevant factors that affect station management. In the protection of subway safety operations on the basis of improving the quality of service, to promote the sustained and healthy development of subway stations. This paper discusses the influencing factors of subway operation accident and station management, and analyzes the specific contents of station management security for subway operation, and develops effective suppression measures. It is desirable to improve the operational quality and safety factor for subway operations.

Identification of Core Competencies for an Undergraduate Food Safety Curriculum Using a Modified Delphi Approach

ERIC Educational Resources Information Center

Johnston, Lynette M.; Wiedmann, Martin; Orta-Ramirez, Alicia; Oliver, Haley F.; Nightingale, Kendra K.; Moore, Christina M.; Stevenson, Clinton D.; Jaykus, Lee-Ann

2014-01-01

Identification of core competencies for undergraduates in food safety is critical to assure courses and curricula are appropriate in maintaining a well-qualified food safety workforce. The purpose of this study was to identify and refine core competencies relevant to postsecondary food safety education using a modified Delphi method. Twenty-nine…

Supervisors Guidebook: Driver and Traffic Safety Education.

ERIC Educational Resources Information Center

Aaron, James E.; And Others

Intended for those responsible to organize, oversee, and evaluate a school's comprehensive traffic safety education program, this Illinois State guide contains nine major sections and appendixes. An introduction presents philosophy and status of the Illinois program, general goals and objectives, notes on relevant professional associations, and…

Constraining Quaternary ice covers and erosion rates using cosmogenic 26Al/10Be nuclide concentrations

NASA Astrophysics Data System (ADS)

Knudsen, Mads Faurschou; Egholm, David Lundbek

2018-02-01

Paired cosmogenic nuclides are often used to constrain the exposure/burial history of landforms repeatedly covered by ice during the Quaternary, including tors, high-elevation surfaces, and steep alpine summits in the circum-Arctic regions. The approach generally exploits the different production rates and half-lives of 10Be and 26Al to infer past exposure/burial histories. However, the two-stage minimum-limiting exposure and burial model regularly used to interpret the nuclides ignores the effect of variable erosion rates, which potentially may bias the interpretation. In this study, we use a Monte Carlo model approach to investigate systematically how the exposure/burial and erosion history, including variable erosion and the timing of erosion events, influence concentrations of 10Be and 26Al. The results show that low 26Al/10Be ratios are not uniquely associated with prolonged burial under ice, but may as well reflect ice covers that were limited to the coldest part of the late Pleistocene combined with recent exhumation of the sample, e.g. due to glacial plucking during the last glacial period. As an example, we simulate published 26Al/10Be data from Svalbard and show that it is possible that the steep alpine summits experienced ice-free conditions during large parts of the late Pleistocene and varying amounts of glacial erosion. This scenario, which contrasts with the original interpretation of more-or-less continuous burial under non-erosive ice over the last ∼1 Myr, thus challenge the conventional interpretation of such data. On the other hand, high 26Al/10Be ratios do not necessarily reflect limited burial under ice, which is the common interpretation of high ratios. In fact, high 26Al/10Be ratios may also reflect extensive burial under ice, combined with a change from burial under erosive ice, which brought the sample close to the surface, to burial under non-erosive ice at some point during the mid-Pleistocene. Importantly, by allowing for variable

The Evolution of System Safety at NASA

NASA Technical Reports Server (NTRS)

Dezfuli, Homayoon; Everett, Chris; Groen, Frank

2014-01-01

The NASA system safety framework is in the process of change, motivated by the desire to promote an objectives-driven approach to system safety that explicitly focuses system safety efforts on system-level safety performance, and serves to unify, in a purposeful manner, safety-related activities that otherwise might be done in a way that results in gaps, redundancies, or unnecessary work. An objectives-driven approach to system safety affords more flexibility to determine, on a system-specific basis, the means by which adequate safety is achieved and verified. Such flexibility and efficiency is becoming increasingly important in the face of evolving engineering modalities and acquisition models, where, for example, NASA will increasingly rely on commercial providers for transportation services to low-earth orbit. A key element of this objectives-driven approach is the use of the risk-informed safety case (RISC): a structured argument, supported by a body of evidence, that provides a compelling, comprehensible and valid case that a system is or will be adequately safe for a given application in a given environment. The RISC addresses each of the objectives defined for the system, providing a rational basis for making informed risk acceptance decisions at relevant decision points in the system life cycle.

Safety Relevant Observations on the X2000 Train as Developed for the Swedish National Railways

DOT National Transportation Integrated Search

1990-01-01

The safety of high speed rail technology proposed for possible application in the United States is of concern to the Federal Railroad Administration. This report, one in a series of reports planned for high speed rail technologies presents an initial...

Safety Outreach and Incident Response Stakeholder Strategy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosewater, David Martin; Conover, David

2016-06-01

The objective of this document is to set out a strategy to reach all stakeholders that can impact the timely deployment of safe stationary energy storage systems in the built environment with information on ESS technology and safety that is relevant to their role in deployment of the technology.

Exploring the role of emotional intelligence in behavior-based safety coaching.

PubMed

Wiegand, Douglas M

2007-01-01

Safety coaching is an applied behavior analysis technique that involves interpersonal interaction to understand and manipulate environmental conditions that are directing (i.e., antecedent to) and motivating (i.e., consequences of) safety-related behavior. A safety coach must be skilled in interacting with others so as to understand their perspectives, communicate a point clearly, and be persuasive with behavior-based feedback. This article discusses the evidence-based "ability model" of emotional intelligence and its relevance to the interpersonal aspect of the safety coaching process. Emotional intelligence has potential for improving safety-related efforts and other aspects of individuals' work and personal lives. Safety researchers and practitioners are therefore encouraged to gain an understanding of emotional intelligence and conduct and support research applying this construct toward injury prevention.

26Al - 10Be cosmogenic nuclide isochron burial dating in combination with luminescence dating of two Danube terraces

NASA Astrophysics Data System (ADS)

Neuhuber, Stephanie; Braumann, Sandra; Lüthgens, Christopher; Fiebig, Markus; Häuselmann, Philipp; Schäfer, Jörg

2016-04-01

The Quaternary sediment record in the Vienna Basin is influenced by two main factors: (1) the tectonic development of a pull apart basin along a sinistral strike slip fault system between the Eastern Alps and the West Carpathians and by (2) strongly varying sediment supply during the Plio- and Pleistocene. From the Late Pannonian (8.8 Ma) onward a large-scale regional uplift (Decker et al., 2005) controls terrace formation in the Vienna Basin. The main sediment supply into the Vienna Basin originates from the Danube, and subordinately from tributaries to the south such as Piesting, Fischa, Leitha and from the north by the river March. Today the Danube forms a large floodplain that is bordered to the north by one large Pleistocene terrace, the Gänserndorf Terrace that is situated 17 m above todays water level. Farther to the east a smaller terrace, the Schlosshof Terrace, reaches 25 m above todays water level. These terrace levels are tilted by movement of underlying blocks (Peresson, 2006). Both, the Schlosshof and Gänserndorf terraces consist of successions of up to 2 m thick gravel beds with intercalated sand layers or -lenses that may locally reach thicknesses up to 0.8 m. At each terrace one gavel pit was selected to calculate the time of terrace deposition by luminescence dating in combination with 26Al/10Be cosmogenic nuclide isochrone dating (Balco and Rovery, 2008). Five quartz stones from the base of each terrace were physically and chemically processed to obtain Al and Be oxides for Acceleration Mass Spectrometry. Sand samples for luminescence dating were taken above the cosmogenic nuclide samples from the closest suitable sand body. Decker et al., 2005. QSR 24, 307-322 Peresson, 2006 Geologie der österreichischen Bundesländer Niederösterreich 255-258 Balco and Rovey, 2008. AJS 908, 1083-1114 Thanks to FWF P 23138-N19, OMAA 90öu17

Medicaid Markets and Pediatric Patient Safety in Hospitals

PubMed Central

Smith, Richard B; Cheung, Robyn; Owens, Pamela; Wilson, R Mark; Simpson, Lisa

2007-01-01

Objective To examine the association of Medicaid market characteristics to potentially preventable adverse medical events for hospitalized children, controlling for patient- and hospital-level factors. Data Sources/Study Setting Two carefully selected Agency for Healthcare Research and Quality (AHRQ) pediatric patient safety indicators (decubitus ulcers and laceration) are analyzed using the new pediatric-specific, risk-adjusting, patient safety algorithm from the AHRQ. All pediatric hospital discharges for patients age 0–17 in Florida, New York, and Wisconsin, and at risk of any of these two patient safety events, are examined for the years 1999–2001 (N=859,922). Study Design Logistic regression on the relevant pool of discharges estimates the probability an individual patient experiences one of the two PSI events. Data Extraction Methods Pediatric discharges from the 1999 to 2001 State Inpatient Databases (SIDs) from the AHRQ Healthcare Cost and Utilization Project, merged with hospital-level data from the American Hospital Association's Annual Survey, Medicaid data obtained from the Centers for Medicare and Medicaid Services and state Medicaid offices, and private and Medicaid managed care enrollment data obtained from InterStudy, are used in the estimations. Principal Findings At the market level, patients in markets in which Medicaid payers face relatively little competition are more likely to experience a patient safety event (odds ratio [OR]=1.602), while patients in markets in which hospitals face relatively little competition are less likely to experience an adverse event (OR=0.686). At the patient-discharge and hospital levels, Medicaid characteristics are not significantly associated with the incidence of a pediatric patient safety event. Conclusions Our analysis offers additional insights to previous work and suggests a new factor—the Medicaid-payer market—as relevant to the issue of pediatric patient safety. PMID:17850529

Chlorine-36 in fossil rat urine: an archive of cosmogenic nuclide deposition during the past 40,000 years.

PubMed

Plummer, M A; Phillips, F M; Fabryka-Martin, J; Turin, H J; Wigand, P E; Sharma, P

1997-07-25

Knowledge of the production history of cosmogenic nuclides, which is needed for geological and archaeological dating, has been uncertain. Measurements of chlorine-36/chlorine (36Cl/Cl) ratios in fossil packrat middens from Nevada that are radiocarbon-dated between about 38 thousand years ago (ka) and the present showed that 36Cl/Cl ratios were higher by a factor of about 2 before approximately 11 ka. This raises the possibility that cosmogenic production rates just before the close of the Pleistocene were up to 50% higher than is suggested by carbon-14 calibration data. The discrepancy could be explained by addition of low-carbon-14 carbon dioxide to the atmosphere during that period, which would have depressed atmospheric radiocarbon activity. Alternatively, climatic effects on 36Cl deposition may have enhanced the 36Cl/Cl ratios.

Total Cross Sections as a Surrogate for Neutron Capture: An Opportunity to Accurately Constrain (n,γ) Cross Sections for Nuclides Beyond the Reach of Direct Measurements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koehler, Paul E.

2014-03-05

There are many (n,γ) cross sections of great interest to radiochemical diagnostics and to nuclear astrophysics which are beyond the reach of current measurement techniques, and likely to remain so for the foreseeable future. In contrast, total neutron cross sections currently are feasible for many of these nuclides and provide almost all the information needed to accurately calculate the (n,γ) cross sections via the nuclear statistical model (NSM). I demonstrate this for the case of 151Sm; NSM calculations constrained using average resonance parameters obtained from total cross section measurements made in 1975, are in excellent agreement with recent 151Sm (n,γ)more » measurements across a wide range of energy. Furthermore, I demonstrate through simulations that total cross section measurements can be made at the Manuel Lujan Jr. Neutron Scattering Center at the Los Alamos Neutron Science Center for samples as small as 10μg. Samples of this size should be attainable for many nuclides of interest. Finally, I estimate that over half of the radionuclides identified ~20 years ago as having (n,γ) cross sections of importance to s-process nucleosynthesis studies (24/43) and radiochemical diagnostics (11/19), almost none of which have been measured, can be constrained using this technique.« less

Cosmogenic nuclides application on French Mediterranean shore platform development

NASA Astrophysics Data System (ADS)

Giuliano, Jérémy; Lebourg, Thomas; Godard, Vincent; Dewez, Thomas; Braucher, Régis; Bourlès, Didier; Marçot, Nathalie

2014-05-01

Rocky shorelines are among the most common elements of the world's littoral zone, and the potential effects of rising sea level on the ever increasing populations require a better understanding of their dynamics. The sinuosity and heterogeneity of the shoreline morphology at large and intermediate wavelengths (1-100 km) results from their constant evolution under the combined influence of marine and continental forcings. This macro-scale organization is the expression of the action of elementary erosion processes acting at shorter wavelengths (<1 km) which lead to the development of shore platforms by landward retreat of cliff edges. Modern analytical techniques (laser-scaning, micro-erosion meters, aerial surveys) constitute appropriate methods to identify and quantify processes of cliff retreat to 1-100 yrs time-scales. But over this time frame, shore platform development appears imperceptible. Precise knowledge of long-term erosion rates are needed to understand rocky shore evolution, and develop quantitative modeling of platform development. Rocky coasts constitute a Quaternary sea level evolution archive that is partly preserved and progressively destroyed. One major challenges is to determine the degree to which coast morphologies are (i) contemporary, (ii) or ancient features inherited, (iii) or partly inherited from Quaternary interglacial stages. In order to fill the lack of long term coast morphodynamic data, we use cosmogenic nuclides (36Cl) to study abrasion surfaces carved in carbonates lithologies along the French Mediterranean coast, in a microtidal environment (Côte Bleue, West of Marseille). 36Cl concentration heritage influences strongly our interpretations in terms of age and denudation of the surfaces. We propose to constrain heritage in sampling oldest relic marine surfaces at 10m of altitude, and along recent cliff scarp. 36Cl concentrations show that the lowest platforms near sea level are contemporary and the highest ones (8-14 m above sea

Fission barriers at the end of the chart of the nuclides

DOE PAGES

Möller, Peter; Sierk, Arnold J.; Ichikawa, Takatoshi; ...

2015-02-12

We present calculated fission-barrier heights for 5239 nuclides for all nuclei between the proton and neutron drip lines with 171 ≤ A ≤ 330. The barriers are calculated in the macroscopic-microscopic finite-range liquid-drop (FRLDM) with a 2002 set of macroscopic-model parameters. The saddle-point energies are determined from potential-energy surfaces based on more than five million different shapes, defined by five deformation parameters in the three-quadratic-surface shape parametrization: elongation, neck diameter, left-fragment spheroidal deformation, right-fragment spheroidal deformation, and nascent-fragment mass asymmetry. The energy of the ground state is determined by calculating the lowest-energy configuration in both the Nilsson perturbed-spheroid (ϵ) andmore » the spherical-harmonic (β) parametrizations, including axially asymmetric deformations. The lower of the two results (correcting for zero-point motion) is defined as the ground-state energy. The effect of axial asymmetry on the inner barrier peak is calculated in the (ϵ,γ) parametrization. We have earlier benchmarked our calculated barrier heights to experimentally extracted barrier parameters and found average agreement to about one MeV for known data across the nuclear chart. Here we do additional benchmarks and investigate the qualitative and, when possible, quantitative agreement and/or consistency with data on β-delayed fission, isotope generation along prompt-neutron-capture chains in nuclear-weapons tests, and superheavy-element stability. In addition these studies all indicate that the model is realistic at considerable distances in Z and N from the region of nuclei where its parameters were determined.« less

Fission barriers at the end of the chart of the nuclides

NASA Astrophysics Data System (ADS)

Möller, Peter; Sierk, Arnold J.; Ichikawa, Takatoshi; Iwamoto, Akira; Mumpower, Matthew

2015-02-01

We present calculated fission-barrier heights for 5239 nuclides for all nuclei between the proton and neutron drip lines with 171 ≤A ≤330 . The barriers are calculated in the macroscopic-microscopic finite-range liquid-drop model with a 2002 set of macroscopic-model parameters. The saddle-point energies are determined from potential-energy surfaces based on more than 5 000 000 different shapes, defined by five deformation parameters in the three-quadratic-surface shape parametrization: elongation, neck diameter, left-fragment spheroidal deformation, right-fragment spheroidal deformation, and nascent-fragment mass asymmetry. The energy of the ground state is determined by calculating the lowest-energy configuration in both the Nilsson perturbed-spheroid (ɛ ) and the spherical-harmonic (β ) parametrizations, including axially asymmetric deformations. The lower of the two results (correcting for zero-point motion) is defined as the ground-state energy. The effect of axial asymmetry on the inner barrier peak is calculated in the (ɛ ,γ ) parametrization. We have earlier benchmarked our calculated barrier heights to experimentally extracted barrier parameters and found average agreement to about 1 MeV for known data across the nuclear chart. Here we do additional benchmarks and investigate the qualitative and, when possible, quantitative agreement and/or consistency with data on β -delayed fission, isotope generation along prompt-neutron-capture chains in nuclear-weapons tests, and superheavy-element stability. These studies all indicate that the model is realistic at considerable distances in Z and N from the region of nuclei where its parameters were determined.

Cosmogenic nuclides in cometary materials: Implications for rate of mass loss and exposure history

NASA Astrophysics Data System (ADS)

Herzog, G. F.; Englert, P. A. J.; Reedy, R. C.

As planned, the Rosetta mission will return to earth with a 10-kg core and a 1-kg surface sample from a comet. The selection of a comet with low current activity will maximize the chance of obtaining material altered as little as possible. Current temperature and level of activity, however, may not reliably indicate previous values. Fortunately, from measurements of the cosmogenic nuclide contents of cometary material, one may estimate a rate of mass loss in the past and perhaps learn something about the exposure history of the comet. Perhaps the simplest way to estimate the rate of mass loss is to compare the total inventories of several long-lived cosmogenic radionuclides with the values expected on the basis of model calculations. Although model calculations have become steadily more reliable, application to bodies with the composition of comets will require some extension beyond the normal range of use. In particular, the influence of light elements on the secondary particle cascade will need study, in part through laboratory irradiations of volatile-rich materials. In the analysis of cometary data, it would be valuable to test calculations against measurements of short-lived isotopes.

Establishing a culture for patient safety - the role of education.

PubMed

Milligan, Frank J

2007-02-01

This paper argues that the process of making significant moves towards a patient safety culture requires changes in healthcare education. Improvements in patient safety are a shared international priority as too many errors and other forms of unnecessary harm are currently occurring in the process of caring for and treating patients. A description of the patient safety agenda is given followed by a brief analysis of human factors theory and its use in other safety critical industries, most notably aviation. The all too common problem of drug administration errors is used to illustrate the relevance of human factors theory to healthcare education with specific mention made of the Human Factors Analysis and Classification System (HFACS).

The Field Relevance of NHTSA's Oblique Research Moving Deformable Barrier Tests.

PubMed

Prasad, Priya; Dalmotas, Dainius; German, Alan

2014-11-01

A small overlap frontal crash test has been recently introduced by the Insurance Institute for Highway Safety in its frontal rating scheme. Another small overlap frontal crash test is under development by the National Highway Traffic Safety Administration (NHTSA). Whereas the IIHS test is conducted against a fixed rigid barrier, the NHTSA test is conducted with a moving deformable barrier that overlaps 35% of the vehicle being tested and the angle between the longitudinal axis of the barrier and the longitudinal axis of the test vehicle is 15 degrees. The field relevance of the IIHS test has been the subject of a paper by Prasad et al. (2014). The current study is aimed at examining the field relevance of the NHTSA test. The field relevance is indicated by the frequency of occurrence of real world crashes that are simulated by the test conditions, the proportion of serious-to-fatal real world injuries explained by the test condition, and rates of serious injury to the head, chest and other body regions in the real world crashes resembling the test condition. The database examined for real world crashes is NASS. Results of the study indicate that 1.4% of all frontal 11-to-1 o'clock crashes are simulated by the test conditions that account for 2.4% to 4.5% of all frontal serious-to-fatal (MAIS3+F) injuries. Injury rates of the head and the chest are substantially lower in far-side than in near-side frontal impacts. Crash test ATD rotational responses of the head in the tests overpredict the real world risk of serious-to-fatal brain injuries.

Surface Uplift Rate Constrained by Multiple Terrestrial Cosmogenic Nuclides: Theory and Application from the Central Andean Plateau

NASA Astrophysics Data System (ADS)

McPhillips, D. F.; Hoke, G. D.; Niedermann, S.; Wittmann, H.

2015-12-01

There is widespread interest in quantifying the growth and decay of topography. However, prominent methods for quantitative determinations of paleoelevation rely on assumptions that are often difficult to test. For example, stable isotope paleoaltimetry relies on the knowledge of past lapse rates and moisture sources. Here, we demonstrate how cosmogenic 10Be - 21Ne and/or 10Be - 26Al sample pairs can be applied to provide independent estimates of surface uplift rate using both published data and new data from the Atacama Desert. Our approach requires a priori knowledge of the maximum age of exposure of the sampled surface. Ignimbrite surfaces provide practical sampling targets. When erosion is very slow (roughly, ≤1 m/Ma), it is often possible to constrain paleo surface uplift rate with precision comparable to that of stable isotopic methods (approximately ±50%). The likelihood of a successful measurement is increased by taking n samples from a landscape surface and solving for one regional paleo surface uplift rate and n local erosion rates. In northern Chile, we solve for surface uplift and erosion rates using three sample groups from the literature (Kober et al., 2007). In the two lower elevation groups, we calculate surface uplift rates of 110 (+60/-12) m/Myr and 160 (+120/-6) m/Myr and estimate uncertainties with a bootstrap approach. The rates agree with independent estimates derived from stream profile analyses nearby (Hoke et al., 2007). Our calculated uplift rates correspond to total uplift of 1200 and 850 m, respectively, when integrated over appropriate timescales. Erosion rates were too high to reliably calculate the uplift rate in the third, high elevation group. New cosmogenic nuclide analyses from the Atacama Desert are in progress, and preliminary results are encouraging. In particular, a replicate sample in the vicinity of the first Kober et al. (2007) group independently yields a surface uplift rate of 110 m/Myr. Compared to stable isotope

Meeting the global demand of sports safety: the intersection of science and policy in sports safety.

PubMed

Timpka, Toomas; Finch, Caroline F; Goulet, Claude; Noakes, Tim; Yammine, Kaissar

2008-01-01

Sports and physical activity are transforming, and being transformed by, the societies in which they are practised. From the perspectives of both competitive and non-competitive sports, the complexity of their integration into today's society has led to neither sports federations nor governments being able to manage the safety problem alone. In other words, these agencies, whilst promoting sport and physical activity, deliver policy and practices in an uncoordinated way that largely ignores the need for a concurrent overall policy for sports safety. This article reviews and analyses the possibility of developing an overall sports safety policy from a global viewpoint. Firstly, we describe the role of sports in today's societies and the context within which much sport is delivered. We then discuss global issues related to injury prevention and safety in sports, with practical relevance to this important sector, including an analysis of critical policy issues necessary for the future development of the area and significant safety gains for all. We argue that there is a need to establish the sports injury problem as a critical component of general global health policy agendas, and to introduce sports safety as a mandatory component of all sustainable sports organizations. We conclude that the establishment of an explicit intersection between science and policy making is necessary for the future development of sports and the necessary safety gains required for all participants around the world. The Safe Sports International safety promotion programme is outlined as an example of an international organization active within this arena.

"Evidence" Under a Magnifying Glass: Thoughts on Safety Argument Epistemology

NASA Technical Reports Server (NTRS)

Graydon, P. J.; Holloway, C. M.

2015-01-01

Common definitions of "safety case" emphasize that evidence is the basis of a safety argument, yet few widely referenced works explicitly define "evidence". Their examples suggest that similar things can be regarded as evidence. But the category evidence seems to contain (1) processes for finding things out, (2) information resulting from such processes, and (3) relevant documents. Moreover, any item of evidence could be replaced by further argument. Normative models of informal argumentation do not offer clear guidance on when a safety argument should cite evidence rather than appeal to a more detailed argument. Disciplines such as the law address the problem with a practical, domain-specific epistemology. In this paper, we explore these problems associated with evidence citations in safety arguments, identify goals for a theory of safety argument evidence and a practical safety argument epistemology, propose a model of safety evidence citation that advances the identified goals, and present a related extension to the Goal Structuring Notation (GSN).

Analyzing research trends on drug safety using topic modeling.

PubMed

Zou, Chen

2018-06-01

Published drug safety data has evolved in the past decade due to scientific and technological advances in the relevant research fields. Considering that a vast amount of scientific literature has been published in this area, it is not easy to identify the key information. Topic modeling has emerged as a powerful tool to extract meaningful information from a large volume of unstructured texts. Areas covered: We analyzed the titles and abstracts of 4347 articles in four journals dedicated to drug safety from 2007 to 2016. We applied Latent Dirichlet allocation (LDA) model to extract 50 main topics, and conducted trend analysis to explore the temporal popularity of these topics over years. Expert Opinion/Commentary: We found that 'benefit-risk assessment and communication', 'diabetes' and 'biologic therapy for autoimmune diseases' are the top 3 most published topics. The topics relevant to the use of electronic health records/observational data for safety surveillance are becoming increasingly popular over time. Meanwhile, there is a slight decrease in research on signal detection based on spontaneous reporting, although spontaneous reporting still plays an important role in benefit-risk assessment. The topics related to medical conditions and treatment showed highly dynamic patterns over time.

Assessing Student Perceptions of School Victimization and School Safety: A Psychometric Assessment of Relevant Instruments

ERIC Educational Resources Information Center

Soderstrom, Irina R.; Elrod, Preston

2006-01-01

In an effort to assess students' perceptions of victimization in their schools, as well as their schools' safety, over 1,900 students from elementary, middle, high, and alternative schools were administered a 154-item questionnaire. The responses on the items were used to establish the psychometric properties of 19 theoretically driven scales and…

Openness to experience, work experience and patient safety.

PubMed

Chang, Hao-Yuan; Friesner, Daniel; Lee, I-Chen; Chu, Tsung-Lan; Chen, Hui-Ling; Wu, Wan-Er; Teng, Ching-I

2016-11-01

The purpose of this study is to examine how the interaction between nurse openness and work experience is related to patient safety. No study has yet examined the interactions between these, and how openness and work experience jointly impact patient safety. This study adopts a cross-sectional design, using self-reported work experience, perceived time pressure and measures of patient safety, and was conducted in a major medical centre. The sample consisted of 421 full-time nurses from all available units in the centre. Proportionate random sampling was used. Patient safety was measured using the self-reported frequency of common adverse events. Openness was self-rated using items identified in the relevant literature. Nurse openness is positively related to the patient safety construct (B = 0.08, P = 0.03). Moreover, work experience reduces the relation between openness and patient safety (B = -0.12, P < 0.01). The relationship between openness, work experience and patient safety suggests a new means of improving patient care in a health system setting. Nurse managers may enhance patient safety by assessing nurse openness and assigning highly open nurses to duties that make maximum use of that trait. © 2016 John Wiley & Sons Ltd.

[Radiation safety of exploitation of radiation sources at the civil aviation airlines].

PubMed

Afanas'ev, R V; Zuev, V G; Berezin, G I; Sereda, V N; Zasiad'ko, A K

2004-01-01

Radiation risks from isotope-containing equipment, and ionizing and unused X-ray radiation sources are characterized and relevant normative documents with safety requirements to radiation sources installation, radiation safety of aircraft servicing and repair, hand luggage control and heavy luggage registration, personal protection items, system of radiation monitoring at airlines and aircraft works, and liability for breach of performance guidelines are cited.

Good practices on cost - effective road infrastructure safety investments.

PubMed

Yannis, George; Papadimitriou, Eleonora; Evgenikos, Petros; Dragomanovits, Anastasios

2016-12-01

The paper presents the findings of a research project aiming to quantify and subsequently classify several infrastructure-related road safety measures, based on the international experience attained through extensive and selected literature review and additionally on a full consultation process including questionnaire surveys addressed to experts and relevant workshops. Initially, a review of selected research reports was carried out and an exhaustive list of road safety infrastructure investments covering all types of infrastructure was compiled. Individual investments were classified according to the infrastructure investment area and the type of investment and were thereafter analysed on the basis of key safety components. These investments were subsequently ranked in relation to their safety effects and implementation costs and on the basis of this ranking, a set of five most promising investments was selected for an in-depth analysis. The results suggest that the overall cost effectiveness of a road safety infrastructure investment is not always in direct correlation with the safety effect and is recommended that cost-benefit ratios and safety effects are always examined in conjunction with each other in order to identify the optimum solution for a specific road safety problem in specific conditions and with specific objectives.

A New Approach for the Determination of Dose Rate and Radioactivity for Detected Gamma Nuclides Using an Environmental Radiation Monitor Based on an NaI(Tl) Detector.

PubMed

Ji, Young-Yong; Kim, Chang-Jong; Lim, Kyo-Sun; Lee, Wanno; Chang, Hyon-Sock; Chung, Kun Ho

2017-10-01

To expand the application of dose rate spectroscopy to the environment, the method using an environmental radiation monitor (ERM) based on a 3' × 3' NaI(Tl) detector was used to perform real-time monitoring of the dose rate and radioactivity for detected gamma nuclides in the ground around an ERM. Full-energy absorption peaks in the energy spectrum for dose rate were first identified to calculate the individual dose rates of Bi, Ac, Tl, and K distributed in the ground through interference correction because of the finite energy resolution of the NaI(Tl) detector used in an ERM. The radioactivity of the four natural radionuclides was then calculated from the in situ calibration factor-that is, the dose rate per unit curie-of the used ERM for the geometry of the ground in infinite half-space, which was theoretically estimated by Monte Carlo simulation. By an intercomparison using a portable HPGe and samples taken from the ground around an ERM, this method to calculate the dose rate and radioactivity of four nuclides using an ERM was experimentally verified and finally applied to remotely monitor them in real-time in the area in which the ERM had been installed.

Safety management of an underground-based gravitational wave telescope: KAGRA

NASA Astrophysics Data System (ADS)

Ohishi, Naoko; Miyoki, Shinji; Uchiyama, Takashi; Miyakawa, Osamu; Ohashi, Masatake

2014-08-01

KAGRA is a unique gravitational wave telescope with its location underground and use of cryogenic mirrors. Safety management plays an important role for secure development and operation of such a unique and large facility. Based on relevant law in Japan, Labor Standard Act and Industrial Safety and Health Law, various countermeasures are mandated to avoid foreseeable accidents and diseases. In addition to the usual safety management of hazardous materials, such as cranes, organic solvents, lasers, there are specific safety issues in the tunnel. Prevention of collapse, flood, and fire accidents are the most critical issues for the underground facility. Ventilation is also important for prevention of air pollution by carbon monoxide, carbon dioxide, organic solvents and radon. Oxygen deficiency should also be prevented.

Open-type ferry safety system design for using LNG fuel

NASA Astrophysics Data System (ADS)

Pagonis, D. N.; Livanos, G.; Theotokatos, G.; Peppa, S.; Themelis, N.

2016-12-01

In this feasibility study, we investigate the viability of using Liquefied Natural Gas (LNG) fuel in an open type Ro-Ro passenger ferry and the associated potential challenges with regard to the vessel safety systems. We recommend an appropriate methodology for converting existing ships to run on LNG fuel, discuss all the necessary modifications to the ship's safety systems, and also evaluate the relevant ship evacuation procedures. We outline the basic requirements with which the ship already complies for each safety system and analyze the additional restrictions that must be taken into consideration for the use of LNG fuel. Appropriate actions are recommended. Furthermore, we carry out a hazard identification study. Overall, we clearly demonstrate the technical feasibility of the investigated scenario. Minimal modifications to the ship's safety systems are required to comply with existing safety rules for this specific type of ship.

Design and evaluation of simulation scenarios for a program introducing patient safety, teamwork, safety leadership, and simulation to healthcare leaders and managers.

PubMed

Cooper, Jeffrey B; Singer, Sara J; Hayes, Jennifer; Sales, Michael; Vogt, Jay W; Raemer, Daniel; Meyer, Gregg S

2011-08-01

We developed a training program to introduce managers and informal leaders of healthcare organizations to key concepts of teamwork, safety leadership, and simulation to motivate them to act as leaders to improve safety within their sphere of influence. This report describes the simulation scenario and debriefing that are core elements of that program. Twelve teams of clinician and nonclinician managers were selected from a larger set of volunteers to participate in a 1-day, multielement training program. Two simulation exercises were developed: one for teams of nonclinicians and the other for clinicians or mixed groups. The scenarios represented two different clinical situations, each designed to engage participants in discussions of their safety leadership and teamwork issues immediately after the experience. In the scenarios for nonclinicians, participants conducted an anesthetic induction and then managed an ethical situation. The scenario for clinicians simulated a consulting visit to an emergency room that evolved into a problem-solving challenge. Participants in this scenario had a limited time to prepare advice for hospital leadership on how to improve observed safety and cultural deficiencies. Debriefings after both types of scenarios were conducted using principles of "debriefing with good judgment." We assessed the relevance and impact of the program by analyzing participant reactions to the simulation through transcript data and facilitator observations as well as a postcourse questionnaire. The teams generally reported positive perceptions of the relevance and quality of the simulation with varying types and degrees of impact on their leadership and teamwork behaviors. These kinds of clinical simulation exercises can be used to teach healthcare leaders and managers safety leadership and teamwork skills and behaviors.

Analysis of governmental Web sites on food safety issues: a global perspective.

PubMed

Namkung, Young; Almanza, Barbara A

2006-10-01

Despite a growing concern over food safety issues, as well as a growing dependence on the Internet as a source of information, little research has been done to examine the presence and relevance of food safety-related information on Web sites. The study reported here conducted Web site analysis in order to examine the current operational status of governmental Web sites on food safety issues. The study also evaluated Web site usability, especially information dimensionalities such as utility, currency, and relevance of content, from the perspective of the English-speaking consumer. Results showed that out of 192 World Health Organization members, 111 countries operated governmental Web sites that provide information about food safety issues. Among 171 searchable Web sites from the 111 countries, 123 Web sites (71.9 percent) were accessible, and 81 of those 123 (65.9 percent) were available in English. The majority of Web sites offered search engine tools and related links for more information, but their availability and utility was limited. In terms of content, 69.9 percent of Web sites offered information on foodborne-disease outbreaks, compared with 31.5 percent that had travel- and health-related information.

Evidence-based safety (EBS) management: A new approach to teaching the practice of safety management (SM).

PubMed

Wang, Bing; Wu, Chao; Shi, Bo; Huang, Lang

2017-12-01

In safety management (SM), it is important to make an effective safety decision based on the reliable and sufficient safety-related information. However, many SM failures in organizations occur for a lack of the necessary safety-related information for safety decision-making. Since facts are the important basis and foundation for decision-making, more efforts to seek the best evidence relevant to a particular SM problem would lead to a more effective SM solution. Therefore, the new paradigm for decision-making named "evidence-based practice (EBP)" can hold important implications for SM, because it uses the current best evidence for effective decision-making. Based on a systematic review of existing SM approaches and an analysis of reasons why we need new SM approaches, we created a new SM approach called evidence-based safety (EBS) management by introducing evidence-based practice into SM. It was necessary to create new SM approaches. A new SM approach called EBS was put forward, and the basic questions of EBS such as its definition and core were analyzed in detail. Moreover, the determinants of EBS included manager's attitudes towards EBS; evidence-based consciousness in SM; evidence sources; technical support; EBS human resources; organizational culture; and individual attributes. EBS is a new and effective approach to teaching the practice of SM. Of course, further research on EBS should be carried out to make EBS a reality. Practical applications: Our work can provide a new and effective idea and method to teach the practice of SM. Specifically, EBS proposed in our study can help safety professionals make an effective safety decision based on a firm foundation of high-grade evidence. Copyright © 2017 National Safety Council and Elsevier Ltd. All rights reserved.

Vitamin D Safety and Requirements

PubMed Central

de Paula, Francisco J.A.; Rosen, Clifford J.

2011-01-01

Vitamin D an ancient secosteroid is essential for mineral homeostasis, bone remodeling, immune modulation, and energy metabolism. Recently, debates have emerged about the daily vitamin D requirements for healthy and elderly adults, the safety and efficacy of long term supplementation and the role of vitamin D deficiency in several chronic disease states. Since this molecule acts as both a vitamin and a hormone, it should not be surprising that the effects of supplementation are multi-faceted and complex. Yet despite significant progress in the last decade, our understanding of vitamin D physiology and the clinical relevance of low circulating levels of this vitamin remains incomplete. The present review provides the reader with a comprehensive and up-to-date understanding of vitamin D requirements and safety. It also raises some provocative research questions. PMID:22179017

Rating the Relevance of QUORUM-Selected ASRS Incident Narratives to a "Controlled Flight into Terrain" Accident

NASA Technical Reports Server (NTRS)

McGreevy, Michael W.; Statler, Irving C.

1998-01-01

An exploratory study was conducted to identify commercial aviation incidents that are relevant to a "controlled flight into terrain" (CFIT) accident using a NASA-developed text processing method. The QUORUM method was used to rate 67820 incident narratives, virtually all of the narratives in the Aviation Safety Reporting System (ASRS) database, according to their relevance to two official reports on the crash of American Airlines Flight 965 near Cali, Colombia in December 1995. For comparison with QUORUM's ratings, three experienced ASRS analysts read the reports of the crash and independently rated the relevance of the 100 narratives that were most highly rated by QUORUM, as well as 100 narratives randomly selected from the database. Eighty-four of 100 QUORUM-selected narratives were rated as relevant to the Cali accident by one or more of the analysts. The relevant incidents involved a variety of factors, including, over-reliance on automation, confusion and changes during descent/approach, terrain avoidance, and operations in foreign airspace. In addition, the QUORUM collection of incidents was found to be significantly more relevant than the random collection.

Perception of School Safety of a Local School

ERIC Educational Resources Information Center

Massey-Jones, Darla

2013-01-01

This qualitative case study investigated the perception of school safety, what current policies and procedures were effective, and what policies and procedures should be implemented. Data were collected in two steps, by survey and focus group interview. Analysis determined codes that revealed several themes relevant to the perception of school…

Delinking resident duty hours from patient safety

PubMed Central

2014-01-01

Patient safety is a powerful motivating force for change in modern medicine, and is often cited as a rationale for reducing resident duty hours. However, current data suggest that resident duty hours are not significantly linked to important patient outcomes. We performed a narrative review and identified four potential explanations for these findings. First, we question the relevance of resident fatigue in the creation of harmful errors. Second, we discuss factors, including workload, experience, and individual characteristics, that may be more important determinants of resident fatigue than are duty hours. Third, we describe potential adverse effects that may arise from – and, therefore, counterbalance any potential benefits of – duty hour reductions. Fourth, we explore factors that may mitigate any risks to patient safety associated with using the services of resident trainees. In summary, it may be inappropriate to justify a reduction in working hours on the grounds of a presumed linkage between patient safety and resident duty hours. Better understanding of resident-related factors associated with patient safety will be essential if improvements in important patient safety outcomes are to be realized through resident-focused strategies. PMID:25561349

Measuring safety culture in the ambulatory setting: the safety attitudes questionnaire--ambulatory version.

PubMed

Modak, Isitri; Sexton, J Bryan; Lux, Thomas R; Helmreich, Robert L; Thomas, Eric J

2007-01-01

Provider attitudes about issues pertinent to patient safety may be related to errors and adverse events. We know of no instruments that measure safety-related attitudes in the outpatient setting. To adapt the safety attitudes questionnaire (SAQ) to the outpatient setting and compare attitudes among different types of providers in the outpatient setting. We modified the SAQ to create a 62-item SAQ-ambulatory version (SAQ-A). Patient care staff in a multispecialty, academic practice rated their agreement with the items using a 5-point Likert scale. Cronbach's alpha was calculated to determine reliability of scale scores. Differences in SAQ-A scores between providers were assessed using ANOVA. Of the 409 staff, 282 (69%) returned surveys. One hundred ninety (46%) surveys were included in the analyses. Cronbach's alpha ranged from 0.68 to 0.86 for the scales: teamwork climate, safety climate, perceptions of management, job satisfaction, working conditions, and stress recognition. Physicians had the least favorable attitudes about perceptions of management while managers had the most favorable attitudes (mean scores: 50.4 +/- 22.5 vs 72.5 +/- 19.6, P < 0.05; percent with positive attitudes 18% vs 70%, respectively). Nurses had the most positive stress recognition scores (mean score 66.0 +/- 24.0). All providers had similar attitudes toward teamwork climate, safety climate, job satisfaction, and working conditions. The SAQ-A is a reliable tool for eliciting provider attitudes about the ambulatory work setting. Attitudes relevant to medical error may differ among provider types and reflect behavior and clinic operations that could be improved.

On the usability of frequency distributions and source attribution of Cs-137 detections encountered in the IMS radio-nuclide network for radionuclide event screening and climate change monitoring

NASA Astrophysics Data System (ADS)

Becker, A.; Wotawa, G.; Zähringer, M.

2009-04-01

Under the provisions of the Comprehensive Nuclear-Test-Ban Treaty (CTBT), airborne radioactivity is measured by means of high purity Germanium gamma ray detectors deployed in a global monitoring network. Almost 60 of the scheduled 80 stations have been put in provisional operations by the end of 2008. Each station daily sends the 24 hour samples' spectroscopic data to the Vienna based Provisional Technical Secretariat (PTS) of the CTBT Organization (CTBTO) for review for treaty-relevant nuclides. Cs-137 is one of these relevant isotopes. Its typical minimum detectable concentration is in the order of a few Bq/m3. However, this isotope is also known to occur in atmospheric trace concentrations, due to known non CTBT relevant processes and sources related to, for example, the re-suspension of cesium from historic nuclear tests and/or the Chernobyl reactor disaster, temporarily enhanced by bio-mass burning (Wotawa et al. 2006). Properly attributed cesium detections can be used as a proxy to detect Aeolian dust events (Igarashi et al, 2001) that potentially carry cesium from all aforementioned sources but are also known to play an important role for the radiative forcing in the atmosphere (shadow effect), at the surface (albedo) and the carbon dioxide cycle when interacting with oceanic phytoplankton (Mikami and Shi, 2005). In this context this paper provides a systematic attribution of recent Cs-137 detections in the PTS monitoring network in order to Characterize those stations which are regularly affected by Cs-137 Provide input for procedures that distinguish CTBT relevant detection from other sources (event screening) Explore on the capability of certain stations to use their Cs-137 detections as a proxy to detect aeolian dust events and to flag the belonging filters to be relevant for further investigations in this field (-> EGU-2009 Session CL16/AS4.6/GM10.1: Aeolian dust: initiator, player, and recorder of environmental change). References Igarashi, Y., M

Applying health education theory to patient safety programs: three case studies.

PubMed

Gilkey, Melissa B; Earp, Jo Anne L; French, Elizabeth A

2008-04-01

Program planning for patient safety is challenging because intervention-oriented surveillance data are not yet widely available to those working in this nascent field. Even so, health educators are uniquely positioned to contribute to patient safety intervention efforts because their theoretical training provides them with a guide for designing and implementing prevention programs. This article demonstrates the utility of applying health education concepts from three prominent patient safety campaigns, including the concepts of risk perception, community participation, and social marketing. The application of these theoretical concepts to patient safety programs suggests that health educators possess a knowledge base and skill set highly relevant to patient safety and that their perspective should be increasingly brought to bear on the design and evaluation of interventions that aim to protect patients from preventable medical error.

Nuclear Data Sheets for A = 34

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nica N.; Nica,N.; Singh,B.

2012-07-01

Nuclear spectroscopic information for experimentally investigated nuclides of mass 34 (Ne, Na, Mg, Al, Si, P, S, Cl, Ar, K, Ca) has been evaluated. The principal sources of the Adopted Levels presented for nuclides close to the stability line are Endt's evaluations (1990En08, 1978En02). The data sets for reactions and decays, including all available gamma-ray data, are based mostly on the original literature. There are no data available for the excited states in {sup 34}Ne and {sup 34}Na. The existence of the {sup 34}K and {sup 34}Ca nuclides has been searched and reported in a secondary publication but no evidencemore » was found for their detection. Both nuclides are possible candidates for one or two-proton emission. Only upper limits of half-lives have been proposed based on expected cross sections. Decay schemes for the {beta} decays of {sup 34}Ne, {sup 34}Na, {sup 34}Mg, and {sup 34}Si are not known. Very little information is available for {beta}-delayed neutron decays of {sup 35}Na, {sup 35}Mg and {sup 35}Si which lead to population of levels in A = 34 nuclides. Neutron-rich nuclides in this mass region are relevant to 'island of inversion'.« less

Measuring safety climate in elderly homes.

PubMed

Yeung, Koon-Chuen; Chan, Charles C

2012-02-01

Provision of a valid and reliable safety climate dimension brings enormous benefits to the elderly home sector. The aim of the present study was to make use of the safety climate instrument developed by OSHC to measure the safety perceptions of employees in elderly homes such that the factor structure of the safety climate dimensions of elderly homes could be explored. In 2010, surveys by mustering on site method were administered in 27 elderly homes that had participated in the "Hong Kong Safe and Healthy Residential Care Home Accreditation Scheme" organized by the Occupational Safety and Health Council. Six hundred and fifty-one surveys were returned with a response rate of 54.3%. To examine the factor structure of safety climate dimensions in our study, an exploratory factor analysis (EFA) using principal components analysis method was conducted to identify the underlying factors. The results of the modified seven-factor's safety climate structure extracted from 35 items better reflected the safety climate dimensions of elderly homes. The Cronbach alpha range for this study (0.655 to 0.851) indicated good internal consistency among the seven-factor structure. Responses from managerial level, supervisory and professional level, and front-line staff were analyzed to come up with the suggestion on effective ways of improving the safety culture of elderly homes. The overall results showed that managers generally gave positive responses in the factors evaluated, such as "management commitment and concern to safety," "perception of work risks and some contributory influences," "safety communication and awareness," and "safe working attitude and participation." Supervisors / professionals, and frontline level staff on the other hand, have less positive responses. The result of the lowest score in the factors - "perception of safety rules and procedures" underlined the importance of the relevance and practicability of safety rules and procedures. The modified OSHC

Safety of transcranial Direct Current Stimulation: Evidence Based Update 2016

PubMed Central

Bikson, Marom; Grossman, Pnina; Thomas, Chris; Zannou, Adantchede Louis; Jiang, Jimmy; Adnan, Tatheer; Mourdoukoutas, Antonios P; Kronberg, Greg; Truong, Dennis; Boggio, Paulo; Brunoni, André R.; Charvet, Leigh; Fregni, Felipe; Fritsch, Brita; Gillick, Bernadette; Hamilton, Roy H.; Hampstead, Benjamin M.; Jankord, Ryan; Kirton, Adam; Knotkova, Helena; Liebetanz, David; Liu, Anli; Loo, Colleen; Nitsche, Michael A.; Reis, Janine; Richardson, Jessica D.; Rotenberg, Alexander; Turkeltaub, Peter E.; Woods, Adam J.

2016-01-01

This review updates and consolidates evidence on the safety of transcranial Direct Current Stimulation (tDCS). Safety is here operationally defined by, and limited to, the absence of evidence for a Serious Adverse Effect, the criteria for which are rigorously defined. This review adopts an evidence-based approach, based on an aggregation of experience from human trials, taking care not to confuse speculation on potential hazards or lack of data to refute such speculation with evidence for risk. Safety data from animal tests for tissue damage are reviewed with systematic consideration of translation to humans. Arbitrary safety considerations are avoided. Computational models are used to relate dose to brain exposure in humans and animals. We review relevant dose-response curves and dose metrics (e.g. current, duration, current density, charge, charge density) for meaningful safety standards. Special consideration is given to theoretically vulnerable populations including children and the elderly, subjects with mood disorders, epilepsy, stroke, implants, and home users. Evidence from relevant animal models indicates that brain injury by Direct Current Stimulation (DCS) occurs at predicted brain current densities (6.3–13 A/m2) that are over an order of magnitude above those produced by conventional tDCS. To date, the use of conventional tDCS protocols in human trials (≤40 min, ≤4 mA, ≤7.2 Coulombs) has not produced any reports of a Serious Adverse Effect or irreversible injury across over 33,200 sessions and 1,000 subjects with repeated sessions. This includes a wide variety of subjects, including persons from potentially vulnerable populations. PMID:27372845

Developing an OMERACT Core Outcome Set for Assessing Safety Components in Rheumatology Trials: The OMERACT Safety Working Group.

PubMed

Klokker, Louise; Tugwell, Peter; Furst, Daniel E; Devoe, Dan; Williamson, Paula; Terwee, Caroline B; Suarez-Almazor, Maria E; Strand, Vibeke; Woodworth, Thasia; Leong, Amye L; Goel, Niti; Boers, Maarten; Brooks, Peter M; Simon, Lee S; Christensen, Robin

2017-12-01

Failure to report harmful outcomes in clinical research can introduce bias favoring a potentially harmful intervention. While core outcome sets (COS) are available for benefits in randomized controlled trials in many rheumatic conditions, less attention has been paid to safety in such COS. The Outcome Measures in Rheumatology (OMERACT) Filter 2.0 emphasizes the importance of measuring harms. The Safety Working Group was reestablished at the OMERACT 2016 with the objective to develop a COS for assessing safety components in trials across rheumatologic conditions. The safety issue has previously been discussed at OMERACT, but without a consistent approach to ensure harms were included in COS. Our methods include (1) identifying harmful outcomes in trials of interventions studied in patients with rheumatic diseases by a systematic literature review, (2) identifying components of safety that should be measured in such trials by use of a patient-driven approach including qualitative data collection and statistical organization of data, and (3) developing a COS through consensus processes including everyone involved. Members of OMERACT including patients, clinicians, researchers, methodologists, and industry representatives reached consensus on the need to continue the efforts on developing a COS for safety in rheumatology trials. There was a general agreement about the need to identify safety-related outcomes that are meaningful to patients, framed in terms that patients consider relevant so that they will be able to make informed decisions. The OMERACT Safety Working Group will advance the work previously done within OMERACT using a new patient-driven approach.

Large Scale Experiments on Spacecraft Fire Safety

NASA Technical Reports Server (NTRS)

Urban, David L.; Ruff, Gary A.; Minster, Olivier; Toth, Balazs; Fernandez-Pello, A. Carlos; T'ien, James S.; Torero, Jose L.; Cowlard, Adam J.; Legros, Guillaume; Eigenbrod, Christian;

Large Scale Experiments on Spacecraft Fire Safety

NASA Technical Reports Server (NTRS)

Urban, David; Ruff, Gary A.; Minster, Olivier; Fernandez-Pello, A. Carlos; Tien, James S.; Torero, Jose L.; Legros, Guillaume; Eigenbrod, Christian; Smirnov, Nickolay; Fujita, Osamu;

Taking up national safety alerts to improve patient safety in hospitals: The perspective of healthcare quality and risk managers.

PubMed

Pfeiffer, Yvonne; Schwappach, David

2016-01-01

National safety alert systems publish relevant information to improve patient safety in hospitals. However, the information has to be transformed into local action to have an effect on patient safety. We studied three research questions: How do Swiss healthcare quality and risk managers (qm/rm(1)) see their own role in learning from safety alerts issued by the Swiss national voluntary reporting and analysis system? What are their attitudes towards and evaluations of the alerts, and which types of improvement actions were fostered by the safety alerts? A survey was developed and applied to Swiss healthcare risk and quality managers, with a response rate of 39 % (n=116). Descriptive statistics are presented. The qm/rm disseminate and communicate with a broad variety of professional groups about the alerts. While most respondents felt that they should know the alerts and their contents, only a part of them felt responsible for driving organizational change based on the recommendations. However, most respondents used safety alerts to back up their own patient safety goals. The alerts were evaluated positively on various dimensions such as usefulness and were considered as standards of good practice by the majority of the respondents. A range of organizational responses was applied, with disseminating information being the most common. An active role is related to using safety alerts for backing up own patient safety goals. To support an active role of qm/rm in their hospital's learning from safety alerts, appropriate organizational structures should be developed. Furthermore, they could be given special information or training to act as an information hub on the issues discussed in the alerts. Copyright © 2016. Published by Elsevier GmbH.

Drug safety: Pregnancy rating classifications and controversies.

PubMed

Wilmer, Erin; Chai, Sandy; Kroumpouzos, George

2016-01-01

This contribution consolidates data on international pregnancy rating classifications, including the former US Food and Drug Administration (FDA), Swedish, and Australian classification systems, as well as the evidence-based medicine system, and discusses discrepancies among them. It reviews the new Pregnancy and Lactation Labeling Rule (PLLR) that replaced the former FDA labeling system with narrative-based labeling requirements. PLLR emphasizes on human data and highlights pregnancy exposure registry information. In this context, the review discusses important data on the safety of most medications used in the management of skin disease in pregnancy. There are also discussions of controversies relevant to the safety of certain dermatologic medications during gestation. Copyright © 2016 Elsevier Inc. All rights reserved.

Biologics in pediatric psoriasis - efficacy and safety.

PubMed

Dogra, Sunil; Mahajan, Rahul

2018-01-01

Childhood psoriasis is a special situation that is a management challenge for the treating dermatologist. As is the situation with traditional systemic agents, which are commonly used in managing severe psoriasis in children, the biologics are being increasingly used in the recalcitrant disease despite limited data on long term safety. Areas covered: We performed an extensive literature search to collect evidence-based data on the use of biologics in pediatric psoriasis. The relevant literature published from 2000 to September 2017 was obtained from PubMed, using the MeSH words 'biologics', 'biologic response modifiers' and 'treatment of pediatric/childhood psoriasis'. All clinical trials, randomized double-blind or single-blind controlled trials, open-label studies, retrospective studies, reviews, case reports and letters concerning the use of biologics in pediatric psoriasis were screened. Articles covering the use of biologics in pediatric psoriasis were screened and reference lists in the selected articles were scrutinized to identify other relevant articles that had not been found in the initial search. Articles without relevant information about biologics in general (e.g. its mechanism of action, pharmacokinetics and adverse effects) and its use in psoriasis in particular were excluded. We screened 427 articles and finally selected 41 relevant articles. Expert opinion: The available literature on the use of biologics such as anti-tumor necrosis factor (TNF)-α agents, and anti-IL-12/23 agents like ustekinumab suggests that these are effective and safe in managing severe pediatric psoriasis although there is an urgent need to generate more safety data. Dermatologists must be careful about the potential adverse effects of the biologics before administering them to children with psoriasis. It is likely that with rapidly evolving scenario of biologics in psoriasis, these will prove to be very useful molecules particularly in managing severe and recalcitrant

Drug safety: withdrawn medications are only part of the picture.

PubMed

Rawson, Nigel S B

2016-02-13

In a research article published in BMC Medicine, Onakpoya and colleagues provide a historical review of withdrawals of medications for safety reasons. However, withdrawn medications are only one part of the picture about how regulatory agencies manage drug risks. Moreover, medications introduced before the increased pre-marketing regulations and post-marketing monitoring systems instituted after the thalidomide tragedy have little relevance when considering the present drug safety picture because the circumstances under which they were introduced were completely different. To more fully understand drug safety management and regulatory agency actions, withdrawals should be evaluated within the setting and timeframe in which the medications are approved, which requires information about approvals and safety warnings. Studies are needed that provide a more comprehensive current picture of the identification and evaluation of drug safety risks as well as how regulatory agencies deal with them. Please see related research article: http://bmcmedicine.biomedcentral.com/articles/10.1186/s12916-016-0553-2.

Safety Risks Among Home Infusion Nurses and Other Home Health Care Providers

PubMed Central

Galligan, Catherine; Quinn, Margaret

2017-01-01

In the United States, home health care (HHC) is a rapidly growing industry and home infusion therapy is a rapidly growing market. HHC can present substantial occupational safety and health (OSH) risks. This article summarizes major OSH risks relevant to home infusion therapy by illustrating them through real-life scenarios collected systematically using qualitative research methods by the National Institute for Occupational Safety and Health-funded research projects at the University of Massachusetts Lowell. The need for home infusion therapy will continue to grow in the future, and safety interventions to prevent or minimize OSH risks are essential. PMID:28683000

Risk and safety perception on urban and rural roads: Effects of environmental features, driver age and risk sensitivity.

PubMed

Cox, Jolene A; Beanland, Vanessa; Filtness, Ashleigh J

2017-10-03

The ability to detect changing visual information is a vital component of safe driving. In addition to detecting changing visual information, drivers must also interpret its relevance to safety. Environmental changes considered to have high safety relevance will likely demand greater attention and more timely responses than those considered to have lower safety relevance. The aim of this study was to explore factors that are likely to influence perceptions of risk and safety regarding changing visual information in the driving environment. Factors explored were the environment in which the change occurs (i.e., urban vs. rural), the type of object that changes, and the driver's age, experience, and risk sensitivity. Sixty-three licensed drivers aged 18-70 years completed a hazard rating task, which required them to rate the perceived hazardousness of changing specific elements within urban and rural driving environments. Three attributes of potential hazards were systematically manipulated: the environment (urban, rural); the type of object changed (road sign, car, motorcycle, pedestrian, traffic light, animal, tree); and its inherent safety risk (low risk, high risk). Inherent safety risk was manipulated by either varying the object's placement, on/near or away from the road, or altering an infrastructure element that would require a change to driver behavior. Participants also completed two driving-related risk perception tasks, rating their relative crash risk and perceived risk of aberrant driving behaviors. Driver age was not significantly associated with hazard ratings, but individual differences in perceived risk of aberrant driving behaviors predicted hazard ratings, suggesting that general driving-related risk sensitivity plays a strong role in safety perception. In both urban and rural scenes, there were significant associations between hazard ratings and inherent safety risk, with low-risk changes perceived as consistently less hazardous than high

Safety Behaviors in Adults With Social Anxiety: Review and Future Directions.

PubMed

Piccirillo, Marilyn L; Taylor Dryman, M; Heimberg, Richard G

2016-09-01

Safety behaviors are considered an important factor in the maintenance of social anxiety disorder (SAD). Safety behaviors are typically employed by socially anxious individuals to reduce anxiety in feared social situations. However, by preventing individuals with social anxiety from gathering evidence that would disconfirm their maladaptive beliefs about social situations, the use of safety behaviors ultimately maintains social anxiety over time. Twenty years ago, Wells and colleagues (1995) demonstrated that use of safety behaviors diminishes the efficacy of exposure treatment for SAD, suggesting that reduction in the use of safety behaviors during exposure can enhance treatment response. Research on safety behaviors has expanded considerably since Wells et al.'s seminal publication, and our understanding of the role safety behaviors may play in the maintenance of social anxiety has grown in breadth and depth. In this paper, we present a detailed review of the published research on safety behaviors relevant to social anxiety and social-anxiety-related processes. Finally, we evaluate the impact of safety behaviors on the outcome of treatment for SAD, and we look to the literature on safety behaviors in other anxiety disorders to inform our understanding of use of safety behaviors during exposure and to facilitate future research in SAD. Copyright © 2015. Published by Elsevier Ltd.

Understanding safety and production risks in rail engineering planning and protection.

PubMed

Wilson, John R; Ryan, Brendan; Schock, Alex; Ferreira, Pedro; Smith, Stuart; Pitsopoulos, Julia

2009-07-01

Much of the published human factors work on risk is to do with safety and within this is concerned with prediction and analysis of human error and with human reliability assessment. Less has been published on human factors contributions to understanding and managing project, business, engineering and other forms of risk and still less jointly assessing risk to do with broad issues of 'safety' and broad issues of 'production' or 'performance'. This paper contains a general commentary on human factors and assessment of risk of various kinds, in the context of the aims of ergonomics and concerns about being too risk averse. The paper then describes a specific project, in rail engineering, where the notion of a human factors case has been employed to analyse engineering functions and related human factors issues. A human factors issues register for potential system disturbances has been developed, prior to a human factors risk assessment, which jointly covers safety and production (engineering delivery) concerns. The paper concludes with a commentary on the potential relevance of a resilience engineering perspective to understanding rail engineering systems risk. Design, planning and management of complex systems will increasingly have to address the issue of making trade-offs between safety and production, and ergonomics should be central to this. The paper addresses the relevant issues and does so in an under-published domain - rail systems engineering work.

Safety of Transcranial Direct Current Stimulation: Evidence Based Update 2016.

PubMed

Bikson, Marom; Grossman, Pnina; Thomas, Chris; Zannou, Adantchede Louis; Jiang, Jimmy; Adnan, Tatheer; Mourdoukoutas, Antonios P; Kronberg, Greg; Truong, Dennis; Boggio, Paulo; Brunoni, André R; Charvet, Leigh; Fregni, Felipe; Fritsch, Brita; Gillick, Bernadette; Hamilton, Roy H; Hampstead, Benjamin M; Jankord, Ryan; Kirton, Adam; Knotkova, Helena; Liebetanz, David; Liu, Anli; Loo, Colleen; Nitsche, Michael A; Reis, Janine; Richardson, Jessica D; Rotenberg, Alexander; Turkeltaub, Peter E; Woods, Adam J

2016-01-01

This review updates and consolidates evidence on the safety of transcranial Direct Current Stimulation (tDCS). Safety is here operationally defined by, and limited to, the absence of evidence for a Serious Adverse Effect, the criteria for which are rigorously defined. This review adopts an evidence-based approach, based on an aggregation of experience from human trials, taking care not to confuse speculation on potential hazards or lack of data to refute such speculation with evidence for risk. Safety data from animal tests for tissue damage are reviewed with systematic consideration of translation to humans. Arbitrary safety considerations are avoided. Computational models are used to relate dose to brain exposure in humans and animals. We review relevant dose-response curves and dose metrics (e.g. current, duration, current density, charge, charge density) for meaningful safety standards. Special consideration is given to theoretically vulnerable populations including children and the elderly, subjects with mood disorders, epilepsy, stroke, implants, and home users. Evidence from relevant animal models indicates that brain injury by Direct Current Stimulation (DCS) occurs at predicted brain current densities (6.3-13 A/m(2)) that are over an order of magnitude above those produced by conventional tDCS. To date, the use of conventional tDCS protocols in human trials (≤40 min, ≤4 milliamperes, ≤7.2 Coulombs) has not produced any reports of a Serious Adverse Effect or irreversible injury across over 33,200 sessions and 1000 subjects with repeated sessions. This includes a wide variety of subjects, including persons from potentially vulnerable populations. Copyright © 2016 Elsevier Inc. All rights reserved.

Improving patient safety incident reporting systems by focusing upon feedback - lessons from English and Welsh trusts.

PubMed

Wallace, Louise M; Spurgeon, Peter; Benn, Jonathan; Koutantji, Maria; Vincent, Charles

2009-08-01

This paper describes practical implications and learning from a multi-method study of feedback from patient safety incident reporting systems. The study was performed using the Safety Action and Information Feedback from Incident Reporting model, a model of the requirements of the feedback element of a patient safety incident reporting and learning system, derived from a scoping review of research and expert advice from world leaders in safety in high-risk industries. We present the key findings of the studies conducted in the National Health Services (NHS) trusts in England and Wales in 2006. These were a survey completed by risk managers for 351 trusts in England and Wales, three case studies including interviews with staff concerning an example of good practice feedback and an audit of 90 trusts clinical risk staff newsletters. We draw on an Expert Workshop that included 71 experts from the NHS, from regulatory bodies in health care, Royal Colleges, Health and Safety Executive and safety agencies in health care and high-risk industries (commercial aviation, rail and maritime industries). We draw recommendations of enduring relevance to the UK NHS that can be used by trust staff to improve their systems. The recommendations will be of relevance in general terms to health services worldwide.

Engineering and Safety Partnership Enhances Safety of the Space Shuttle Program (SSP)

NASA Technical Reports Server (NTRS)

Duarte, Alberto

2007-01-01

Project Management must use the risk assessment documents (RADs) as tools to support their decision making process. Therefore, these documents have to be initiated, developed, and evolved parallel to the life of the project. Technical preparation and safety compliance of these documents require a great deal of resources. Updating these documents after-the-fact not only requires substantial increase in resources - Project Cost -, but this task is also not useful and perhaps an unnecessary expense. Hazard Reports (HRs), Failure Modes and Effects Analysis (FMEAs), Critical Item Lists (CILs), Risk Management process are, among others, within this category. A positive action resulting from a strong partnership between interested parties is one way to get these documents and related processes and requirements, released and updated in useful time. The Space Shuttle Program (SSP) at the Marshall Space Flight Center has implemented a process which is having positive results and gaining acceptance within the Agency. A hybrid Panel, with equal interest and responsibilities for the two larger organizations, Safety and Engineering, is the focal point of this process. Called the Marshall Safety and Engineering Review Panel (MSERP), its charter (Space Shuttle Program Directive 110 F, April 15, 2005), and its Operating Control Plan emphasizes the technical and safety responsibilities over the program risk documents: HRs; FMEA/CILs; Engineering Changes; anomalies/problem resolutions and corrective action implementations, and trend analysis. The MSERP has undertaken its responsibilities with objectivity, assertiveness, dedication, has operated with focus, and has shown significant results and promising perspectives. The MSERP has been deeply involved in propulsion systems and integration, real time technical issues and other relevant reviews, since its conception. These activities have transformed the propulsion MSERP in a truly participative and value added panel, making a

Relevancy 101

NASA Technical Reports Server (NTRS)

Lynnes, Chris; Newman, Doug

2016-01-01

Where we present an overview on why relevancy is a problem, how important it is and how we can improve it. The topic of relevancy is becoming increasingly important in earth data discovery as our audience is tuned to the accuracy of standard search engines like Google.

[Learning from errors: applying aviation safety concepts to medicine].

PubMed

Sommer, K-J

2012-11-01

Health care safety levels range below other complex industries. Civil aviation has throughout its history developed methods and concepts that have made the airplane into one of the safest means of mass transport. Key elements are accident investigations that focus on cause instead of blame, human-centered design of machinery and processes, continuous training of all personnel and a shared safety culture. These methods and concepts can basically be applied to medicine which has successfully been achieved in certain areas, however, a comprehensive implementation remains to be completed. This applies particularly to including the topic of safety into relevant curricula. Physicians are obliged by the oath"primum nil nocere" to act, but economic as well as political pressure will eventually confine professional freedom if initiative is not taken soon.

Cosmogenic nuclide dating of Sahelanthropus tchadensis and Australopithecus bahrelghazali: Mio-Pliocene hominids from Chad

PubMed Central

Lebatard, Anne-Elisabeth; Bourlès, Didier L.; Duringer, Philippe; Jolivet, Marc; Braucher, Régis; Carcaillet, Julien; Schuster, Mathieu; Arnaud, Nicolas; Monié, Patrick; Lihoreau, Fabrice; Likius, Andossa; Mackaye, Hassan Taisso; Vignaud, Patrick; Brunet, Michel

2008-01-01

Ages were determined at two hominid localities from the Chad Basin in the Djurab Desert (Northern Chad). In the Koro Toro fossiliferous area, KT 12 locality (16°00′N, 18°53′E) was the site of discovery of Australopithecus bahrelghazali (Abel) and in the Toros-Menalla fossiliferous area, TM 266 locality (16°15′N, 17°29′E) was the site of discovery of Sahelanthropus tchadensis (Toumaï). At both localities, the evolutive degree of the associated fossil mammal assemblages allowed a biochronological estimation of the hominid remains: early Pliocene (3–3.5 Ma) at KT 12 and late Miocene (≈7 Ma) at TM 266. Atmospheric 10Be, a cosmogenic nuclide, was used to quasicontinuously date these sedimentary units. The authigenic 10Be/9Be dating of a pelite relic within the sedimentary level containing Abel yields an age of 3.58 ± 0.27 Ma that points to the contemporaneity of Australopithecus bahrelghazali (Abel) with Australopithecus afarensis (Lucy). The 28 10Be/9Be ages obtained within the anthracotheriid unit containing Toumaï bracket, by absolute dating, the age of Sahelanthropus tchadensis to lie between 6.8 and 7.2 Ma. This chronological constraint is an important cornerstone both for establishing the earliest stages of hominid evolution and for new calibrations of the molecular clock. PMID:18305174

A multi-layered active target for the study of neutron-unbound nuclides at NSCL

NASA Astrophysics Data System (ADS)

Freeman, Jessica; Gueye, Paul; Redpath, Thomas; MoNA Collaboration

2017-01-01

The characteristics of neutron-unbound nuclides were investigated using a multi-layered Si/Be active target designed for use with the MoNA/LISA setup at the National Superconducting Cyclotron (NSCL). The setup consists of the MoNA/LISA arrays (for neutron detection) and a superconducting sweeper magnet (for charged separation) to identify products following the decay of neutron unbound states. The segmented target consisted of three 700 mg/cm2 beryllium targets and four 0.14 mm thick 62x62 mm2 silicon detectors. As a commissioning experiment for the target the decay of two-neutron unbound 26O populated in a one-proton removal reaction from a radioactive 27F beam was performed. The 27F secondary radioactive beam from the NSCL's Coupled Cyclotron Facility was produced from the fragmentation of a 140 MeV/u 48Ca beam incident on a thick beryllium target and then cleanly selected by the A1900 fragment separator. The energy loss and position spectra of the incoming beam and reaction products were used to calibrate the Silicon detectors to within 1.5% in both energy and position. A dedicated Geant4 model of the target was developed to simulate the energy loss within the target. A description of the experimental setup, simulation work, and energy and position calibration will be presented. DoE/NNSA - DE-NA0000979.

Nurses' but not supervisors' safety practices are linked with job satisfaction.

PubMed

Hurtado, David A; Kim, Seung-Sup; Subramanian, S V; Dennerlein, Jack T; Christiani, David C; Hashimoto, Dean M; Sorensen, Glorian

2017-10-01

To test the associations of safety practices as reported by nurses and their respective unit supervisors with job satisfaction. Psychosocial workplace factors are associated with job satisfaction; however, it is unknown whether nurses and supervisors accounts of safety practices are differentially linked to this outcome. Cross-sectional study design including nurses (n = 1052) nested in 94 units in two hospitals in Boston (MA, USA). Safety practices refer to the identification and control of occupational hazards at the unit. Safety practices were measured aggregating nurses' responses per unit, and supervisory levels. Individual's job satisfaction for each nurse was the response variable. Supervisors assessed safety practices more favourably than their unit nursing staff. Adjusted random intercept logistic regressions showed that the odds of higher job satisfaction were higher for nurses at units with better safety practices (OR: 1.67, 95% CI: 1.04, 2.68) compared with nurses at units that averaged lower safety practices. Supervisors' reports of safety practices were not correlated with the job satisfaction of their staff. Adequate safety practices might be a relevant managerial role that enhances job satisfaction among nurses. Nursing supervisors should calibrate their safety assessments with their nursing staff to improve nurses' job satisfaction. © 2017 John Wiley & Sons Ltd.

How can we improve our understanding of cardiovascular safety liabilities to develop safer medicines?

PubMed Central

Laverty, HG; Benson, C; Cartwright, EJ; Cross, MJ; Garland, C; Hammond, T; Holloway, C; McMahon, N; Milligan, J; Park, BK; Pirmohamed, M; Pollard, C; Radford, J; Roome, N; Sager, P; Singh, S; Suter, T; Suter, W; Trafford, A; Volders, PGA; Wallis, R; Weaver, R; York, M; Valentin, JP

2011-01-01

Given that cardiovascular safety liabilities remain a major cause of drug attrition during preclinical and clinical development, adverse drug reactions, and post-approval withdrawal of medicines, the Medical Research Council Centre for Drug Safety Science hosted a workshop to discuss current challenges in determining, understanding and addressing ‘Cardiovascular Toxicity of Medicines’. This article summarizes the key discussions from the workshop that aimed to address three major questions: (i) what are the key cardiovascular safety liabilities in drug discovery, drug development and clinical practice? (ii) how good are preclinical and clinical strategies for detecting cardiovascular liabilities? and (iii) do we have a mechanistic understanding of these liabilities? It was concluded that in order to understand, address and ultimately reduce cardiovascular safety liabilities of new therapeutic agents there is an urgent need to: Fully characterize the incidence, prevalence and impact of drug-induced cardiovascular issues at all stages of the drug development process. Ascertain the predictive value of existing non-clinical models and assays towards the clinical outcome. Understand the mechanistic basis of cardiovascular liabilities; by addressing areas where it is currently not possible to predict clinical outcome based on preclinical safety data. Provide scientists in all disciplines with additional skills to enable them to better integrate preclinical and clinical data and to better understand the biological and clinical significance of observed changes. Develop more appropriate, highly relevant and predictive tools and assays to identify and wherever feasible to eliminate cardiovascular safety liabilities from molecules and wherever appropriate to develop clinically relevant and reliable safety biomarkers. PMID:21306581

Certification of highly complex safety-related systems.

PubMed

Reinert, D; Schaefer, M

1999-01-01

The BIA has now 15 years of experience with the certification of complex electronic systems for safety-related applications in the machinery sector. Using the example of machining centres this presentation will show the systematic procedure for verifying and validating control systems using Application Specific Integrated Circuits (ASICs) and microcomputers for safety functions. One section will describe the control structure of machining centres with control systems using "integrated safety." A diverse redundant architecture combined with crossmonitoring and forced dynamization is explained. In the main section the steps of the systematic certification procedure are explained showing some results of the certification of drilling machines. Specification reviews, design reviews with test case specification, statistical analysis, and walk-throughs are the analytical measures in the testing process. Systematic tests based on the test case specification, Electro Magnetic Interference (EMI), and environmental testing, and site acceptance tests on the machines are the testing measures for validation. A complex software driven system is always undergoing modification. Most of the changes are not safety-relevant but this has to be proven. A systematic procedure for certifying software modifications is presented in the last section of the paper.

Measuring patient safety in a UK dental hospital: development of a dental clinical effectiveness dashboard.

PubMed

Pemberton, M N; Ashley, M P; Shaw, A; Dickson, S; Saksena, A

2014-10-01

Patient safety is an important marker of quality for any healthcare organisation. In 2008, the British Government white paper entitled High quality care for all, resulting from a review led by Lord Darzi, identified patient safety as a key component of quality and discussed how it might be measured, analysed and acted upon. National and local clinically curated metrics were suggested, which could be displayed via a 'clinical dashboard'. This paper explains the development of a clinical effectiveness dashboard focused on patient safety in an English dental hospital and how it has helped us identify relevant patient safety issues in secondary dental care.

Technical Guidance from the International Safety Framework for Nuclear Power Source Applications in Outer Space for Design and Development Phases

NASA Astrophysics Data System (ADS)

Summerer, Leopold

2014-08-01

In 2009, the International Safety Framework for Nuclear Power Source Applications in Outer Space [1] has been adopted, following a multi-year process that involved all major space faring nations in the frame of the International Atomic Energy Agency and the UN Committee on the Peaceful Uses of Outer Space. The safety framework reflects an international consensus on best practices. After the older 1992 Principles Relevant to the Use of Nuclear Power Sources in Outer Space, it is the second document at UN level dedicated entirely to space nuclear power sources.This paper analyses aspects of the safety framework relevant for the design and development phases of space nuclear power sources. While early publications have started analysing the legal aspects of the safety framework, its technical guidance has not yet been subject to scholarly articles. The present paper therefore focuses on the technical guidance provided in the safety framework, in an attempt to assist engineers and practitioners to benefit from these.

Most common road safety engineering deficiencies in South Eastern Europe as a part of safe system approach

NASA Astrophysics Data System (ADS)

Jovanov, D.; Vollpracht, H. J.; Beles, H.; Popa, V.; Tolea, B. A.

2017-10-01

Most common road safety engineering deficiencies identified by the authors in South Eastern Europe, including Romania, have been collected together and presented in this paper as a part of road safety unbreakably connected to the safe system approach (driver-vehicle-road). In different South Eastern Europe countries Road Safety Audit (RSA), Road Safety Inspection (RSI), as well as Black Spot Management (BSM) was introduced and practical implementation experience enabled the authors to analyze the road safety problems. Typical road safety engineering deficiencies have been presented in 8 different subsections, based on PIARC (World Road Association) RSA approach. This paper presents collected common road safety problems with relevant illustrations (real pictures) with associated accident risks.

Aviation and healthcare: a comparative review with implications for patient safety.

PubMed

Kapur, Narinder; Parand, Anam; Soukup, Tayana; Reader, Tom; Sevdalis, Nick

2016-01-01

Safety in aviation has often been compared with safety in healthcare. Following a recent article in this journal, the UK government set up an Independent Patient Safety Investigation Service, to emulate a similar well-established body in aviation. On the basis of a detailed review of relevant publications that examine patient safety in the context of aviation practice, we have drawn up a table of comparative features and a conceptual framework for patient safety. Convergence and divergence of safety-related behaviours across aviation and healthcare were derived and documented. Key safety-related domains that emerged included Checklists, Training, Crew Resource Management, Sterile Cockpit, Investigation and Reporting of Incidents and Organisational Culture. We conclude that whilst healthcare has much to learn from aviation in certain key domains, the transfer of lessons from aviation to healthcare needs to be nuanced, with the specific characteristics and needs of healthcare borne in mind. On the basis of this review, it is recommended that healthcare should emulate aviation in its resourcing of staff who specialise in human factors and related psychological aspects of patient safety and staff wellbeing. Professional and post-qualification staff training could specifically include Cognitive Bias Avoidance Training, as this appears to play a key part in many errors relating to patient safety and staff wellbeing.

Dimensions of patient safety culture in family practice.

PubMed

Palacios-Derflingher, Luz; O'Beirne, Maeve; Sterling, Pam; Zwicker, Karen; Harding, Brianne K; Casebeer, Ann

2010-01-01

Safety culture has been shown to affect patient safety in healthcare. While the United States and United Kingdom have studied the dimensions that reflect patient safety culture in family practice settings, to date, this has not been done in Canada. Differences in the healthcare systems between these countries and Canada may affect the dimensions found to be relevant here. Thus, it is important to identify and compare the dimensions from the United States and the United Kingdom in a Canadian context. The objectives of this study were to explore the dimensions of patient safety culture that relate to family practice in Canada and to determine if differences and similarities exist between dimensions found in Canada and those found in previous studies undertaken in the United States and the United Kingdom. A qualitative study was undertaken applying thematic analysis using focus groups with family practice offices and supplementary key stakeholders. Analysis of the data indicated that most of the dimensions from the United States and United Kingdom are appropriate in our Canadian context. Exceptions included owner/managing partner/leadership support for patient safety, job satisfaction and overall perceptions of patient safety and quality. Two unique dimensions were identified in the Canadian context: disclosure and accepting responsibility for errors. Based on this early work, it is important to consider differences in care settings when understanding dimensions of patient safety culture. We suggest that additional research in family practice settings is critical to further understand the influence of context on patient safety culture.

Hospital nurses' working conditions in relation to motivation and patient safety.

PubMed

Toode, Kristi; Routasalo, Pirkko; Helminen, Mika; Suominen, Tarja

2015-03-01

There is a lack of empirical knowledge about nurses' perceptions of their workplace characteristics and conditions, such as level of autonomy and decision authority, work climate, teamwork, skill exploitation and learning opportunities, and their work motivation in relation to practice outputs such as patient safety. Such knowledge is needed particularly in countries, such as Estonia, where hospital systems for preventing errors and improving patient safety are in the early stages of development. This article reports the findings from a cross-sectional survey of hospital nurses in Estonia that was aimed at determining their perceptions of workplace characteristics, working conditions, work motivation and patient safety, and at exploring the relationship between these. Results suggest that perceptions of personal control over their work can affect nurses' motivation, and that perceptions of work satisfaction might be relevant to patient safety improvement work.

Learning from Science and Sport - How we, Safety, "Engage with Rigor"

NASA Astrophysics Data System (ADS)

Herd, A.

2012-01-01

As the world of spaceflight safety is relatively small and potentially inward-looking, we need to be aware of the "outside world". We should then try to remind ourselves to be open to the possibility that data, knowledge or experience from outside of the spaceflight community may provide some constructive alternate perspectives. This paper will assess aspects from two seemingly tangential fields, science and sport, and align these with the world of safety. In doing so some useful insights will be given to the challenges we face and may provide solutions relevant in our everyday (of safety engineering). Sport, particularly a contact sport such as rugby union, requires direct interaction between members of two (opposing) teams. Professional, accurately timed and positioned interaction for a desired outcome. These interactions, whilst an essential part of the game, are however not without their constraints. The rugby scrum has constraints as to the formation and engagement of the two teams. The controlled engagement provides for an interaction between the two teams in a safe manner. The constraints arising from the reality that an incorrect engagement could cause serious injury to members of either team. In academia, scientific rigor is applied to assure that the arguments provided and the conclusions drawn in academic papers presented for publication are valid, legitimate and credible. The scientific goal of the need for rigor may be expressed in the example of achieving a statistically relevant sample size, n, in order to assure analysis validity of the data pool. A failure to apply rigor could then place the entire study at risk of failing to have the respective paper published. This paper will consider the merits of these two different aspects, scientific rigor and sports engagement, and offer a reflective look at how this may provide a "modus operandi" for safety engineers at any level whether at their desks (creating or reviewing safety assessments) or in a

Integrating bioassays and analytical chemistry as an improved approach to support safety assessment of food contact materials.

PubMed

Veyrand, Julien; Marin-Kuan, Maricel; Bezencon, Claudine; Frank, Nancy; Guérin, Violaine; Koster, Sander; Latado, Hélia; Mollergues, Julie; Patin, Amaury; Piguet, Dominique; Serrant, Patrick; Varela, Jesus; Schilter, Benoît

2017-10-01

Food contact materials (FCM) contain chemicals which can migrate into food and result in human exposure. Although it is mandatory to ensure that migration does not endanger human health, there is still no consensus on how to pragmatically assess the safety of FCM since traditional approaches would require extensive toxicological and analytical testing which are expensive and time consuming. Recently, the combination of bioassays, analytical chemistry and risk assessment has been promoted as a new paradigm to identify toxicologically relevant molecules and address safety issues. However, there has been debate on the actual value of bioassays in that framework. In the present work, a FCM anticipated to release the endocrine active chemical 4-nonyphenol (4NP) was used as a model. In a migration study, the leaching of 4NP was confirmed by LC-MS/MS and GC-MS. This was correlated with an increase in both estrogenic and anti-androgenic activities as measured with bioassays. A standard risk assessment indicated that according to the food intake scenario applied, the level of 4NP measured was lower, close or slightly above the acceptable daily intake. Altogether these results show that bioassays could reveal the presence of an endocrine active chemical in a real-case FCM migration study. The levels reported were relevant for safety assessment. In addition, this work also highlighted that bioactivity measured in migrate does not necessarily represent a safety issue. In conclusion, together with analytics, bioassays contribute to identify toxicologically relevant molecules leaching from FCM and enable improved safety assessment.

SER assistant: An expert system for safety evaluation reports

DOE Office of Scientific and Technical Information (OSTI.GOV)

DeChaine, M.D.; Levine, S.H.; Feltus, M.A.

1993-01-01

The SER Assistant is an expert system that assists engineers to write safety evaluation reports (SERs). Section 50.59 of the Code of Federal Regulations allows modifications to be made to nuclear power plants without prior US Nuclear Regulatory Commission approval if two conditions are satisfied. First, the change must not affect the technical specifications of the plant. Second, the modification must not affect a part of the plant described in the final safety analysis report, or if it does, it must not create an unreviewed safety question. The purpose of an SER is to ensure that these conditions are satisfiedmore » for the proposed modification. The SER Assistant aids this process by providing relevant, but directed, questions and information as well as giving engineers an organized environment to document their thought processes.« less

Scientific Approach for Optimising Performance, Health and Safety in High-Altitude Observatories

NASA Astrophysics Data System (ADS)

Böcker, Michael; Vogy, Joachim; Nolle-Gösser, Tanja

2008-09-01

The ESO coordinated study “Optimising Performance, Health and Safety in High-Altitude Observatories” is based on a psychological approach using a questionnaire for data collection and assessment of high-altitude effects. During 2007 and 2008, data from 28 staff and visitors involved in APEX and ALMA were collected and analysed and the first results of the study are summarised. While there is a lot of information about biomedical changes at high altitude, relatively few studies have focussed on psychological changes, for example with respect to performance of mental tasks, safety consciousness and emotions. Both, biomedical and psychological changes are relevant factors in occupational safety and health. The results of the questionnaire on safety, health and performance issues demonstrate that the working conditions at high altitude are less detrimental than expected.

Influence of heavy natural radioactive nuclides introduced in soil with labelled fertilizers and ameliorants on cytogenetic effects in plants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arkhipov, N.P.; Bazylev, V.V.; Bobrikova, E.T.

1985-05-01

The effect of heavy natural radioactive nuclides (STYU, STSTh, SSWRa, S Po, and S Pb) in labeled fertilizers and ameliorants on the number of meiotic chromosome aberrations was studied in field experiments on the major crop plants, wheat, barley and corn. The mining and use of coal and oil and the processing of raw materials in the production of rare and nonferrous metals produce high quantities of wastes with an elevated content of natural radionuclides. One possible way for technogenically altering the natural radiation background of soil is the active utilization of phosphorus fertilizers in agriculture, and also the use,more » as fertilizers and ameliorants of wastes from nonferrous metallurgy, of the ash from heat and power plants and various intermediates from the chemical industry. The authors conclude that the introduction of labeled ammophos, nitrophos and phosphogypsum, which raised the soil background concentration of the specified elements, produced an increase in the number of cells with meiotic chromosome aberrations.« less

Indicators of safety compromise in gastrointestinal endoscopy.

PubMed

Borgaonkar, Mark Ram; Hookey, Lawrence; Hollingworth, Roger; Kuipers, Ernst J; Forster, Alan; Armstrong, David; Barkun, Alan; Bridges, Ron; Carter, Rose; de Gara, Chris; Dube, Catherine; Enns, Robert; Macintosh, Donald; Forget, Sylviane; Leontiadis, Grigorios; Meddings, Jonathan; Cotton, Peter; Valori, Roland

2012-02-01

The importance of quality indicators has become increasingly recognized in gastrointestinal endoscopy. Patient safety requires the identification and monitoring of occurrences associated with harm or the potential for harm. The identification of relevant indicators of safety compromise is, therefore, a critical element that is key to the effective implementation of endoscopy quality improvement programs. To identify key indicators of safety compromise in gastrointestinal endoscopy. The Canadian Association of Gastroenterology Safety and Quality Indicators in Endoscopy Consensus Group was formed to address issues of quality in endoscopy. A subcommittee was formed to identify key safety indicators. A systematic literature review was undertaken, and articles pertinent to safety in endoscopy were identified and reviewed. All complications and measures used to document safety were recorded. From this, a preliminary list of 16 indicators was compiled and presented to the 35-person consensus group during a three-day meeting. A revised list of 20 items was subsequently put to the consensus group for vote for inclusion on the final list of safety indicators. Items were retained only if the consensus group highly agreed on their importance. A total of 19 indicators of safety compromise were retained and grouped into the three following categories: medication-related - the need for CPR, use of reversal agents, hypoxia, hypotension, hypertension, sedation doses in patients older than 70 years of age, allergic reactions and laryngospasm⁄bronchospasm; procedure-related early - perforation, immediate postpolypectomy bleeding, need for hospital admission or transfer to emergency department from the gastroenterology unit, instrument impaction, severe persistent abdominal pain requiring evaluation proven to not be perforation; and procedure-related delayed - death within 30 days of procedure, 14-day unplanned hospitalization, 14-day unplanned contact with a health provider

The safety of available and emerging options for emergency contraception.

PubMed

Lee, Jessica K; Schwarz, Eleanor Bimla

2017-10-01

Emergency contraception (EC) is a way to significantly reduce the chance of becoming pregnant after an episode of unprotected intercourse. Considerable data support the safety of all available and emerging options for EC. Areas covered: This review presents a comprehensive summary of the literature regarding the safety of EC as well as directions for further study. PubMed was searched for all relevant studies published prior to June 2017. Expertopinion: All available methods of EC (i.e., ulipristal acetate pills, levonorgestrel pills, and the copper-IUD), carry only mild side effects and serious adverse events are essentially unknown. The copper IUD has the highest efficacy of EC methods. Given the excellent safety profiles of mifepristone and the levonorgestrel IUD, research is ongoing related to use of these products for EC.

Fall Protection Characteristics of Safety Belts and Human Impact Tolerance.

PubMed

Hino, Yasumichi; Ohdo, Katsutoshi; Takahashi, Hiroki

2014-08-23

Many fatal accidents due to falls from heights have occurred at construction sites not only in Japan but also in other countries. This study aims to determine the fall prevention performance of two types of safety belts: a body belt 1) , which has been used for more than 40 yr in the Japanese construction industry as a general type of safety equipment for fall accident prevention, and a full harness 2, 3) , which has been used in many other countries. To determine human tolerance for impact trauma, this study discusses features of safety belts with reference 4-9) to relevant studies in the medical science, automobile crash safety, and aircrew safety. For this purpose, simple drop tests were carried out in a virtual workplace to measure impact load, head acceleration, and posture in the experiments, the Hybrid-III pedestrian model 10) was used as a human dummy. Hybrid-III is typically employed in official automobile crash tests (New Car Assessment Program: NCAP) and is currently recognized as a model that faithfully reproduces dynamic responses. Experimental results shows that safety performance strongly depends on both the variety of safety belts used and the shock absorbers attached onto lanyards. These findings indicate that fall prevention equipment, such as safety belts, lanyards, and shock absorbers, must be improved to reduce impact injuries to the human head and body during falls.

Fall protection characteristics of safety belts and human impact tolerance.

PubMed

Hino, Yasumichi; Ohdo, Katsutoshi; Takahashi, Hiroki

2014-01-01

Many fatal accidents due to falls from heights have occurred at construction sites not only in Japan but also in other countries. This study aims to determine the fall prevention performance of two types of safety belts: a body belt, which has been used for more than 40 yr in the Japanese construction industry as a general type of safety equipment for fall accident prevention, and a full harness, which has been used in many other countries. To determine human tolerance for impact trauma, this study discusses features of safety belts with reference to relevant studies in the medical science, automobile crash safety, and aircrew safety. For this purpose, simple drop tests were carried out in a virtual workplace to measure impact load, head acceleration, and posture in the experiments, the Hybrid-III pedestrian model was used as a human dummy. Hybrid-III is typically employed in official automobile crash tests (New Car Assessment Program: NCAP) and is currently recognized as a model that faithfully reproduces dynamic responses. Experimental results shows that safety performance strongly depends on both the variety of safety belts used and the shock absorbers attached onto lanyards. These findings indicate that fall prevention equipment, such as safety belts, lanyards, and shock absorbers, must be improved to reduce impact injuries to the human head and body during falls.

Factors Influencing Young Children's Risk of Unintentional Injury: Parenting Style and Strategies for Teaching about Home Safety

ERIC Educational Resources Information Center

Morrongiello, Barbara A.; Corbett, Michael; Lasenby, Jennifer; Johnston, Natalie; McCourt, Meghan

2006-01-01

This study examined mothers' teaching about home-safety issues to 24-30 month and 36-42 month old children, explored the relationship of teaching strategies to parenting styles, and assessed how these factors are related to children's risk of unintentional injury. A structured interview assessed home-safety issues relevant to falls, burns, cuts,…

An evaluation of a new instrument to measure organisational safety culture values and practices.

PubMed

Díaz-Cabrera, D; Hernández-Fernaud, E; Isla-Díaz, R

2007-11-01

The main aim of this research is to evaluate a safety culture measuring instrument centred upon relevant organisational values and practices related to the safety management system. Seven dimensions that reflect underlying safety meanings are proposed. A second objective is to explore the four cultural orientations in the field of safety arising from the competing values framework. The study sample consisted of 299 participants from five companies in different sectors. The results show six dimensions of organisational values and practices and different company profiles in the organisations studied. The four cultural orientations proposed by the competing values framework are not confirmed. Nevertheless, a coexistence of diverse cultural orientations or paradoxes in the companies is observed.

Handling glacially induced faults in the assessment of the long term safety of a repository for spent nuclear fuel at Forsmark, Sweden

NASA Astrophysics Data System (ADS)

Munier, R.

2011-12-01

Located deep into the Baltic shield, far from active plate boundaries and volcanism, Swedish bedrock is characterised by a low frequency of earthquakes of small magnitudes. Yet, faults, predominantly in the Lapland region, offsetting the quarternary regolith ten meters or more, reveal that Swedish bedrock suffered from substantial earthquake activity in connection to the retreat of the latest continental glacier, Weichsel. Storage of nuclear wastes, hazardous for hundreds of thousand years, requires, firstly, isolation of radionuclides and, secondly, retardation of the nuclides should the barriers fail. Swedish regulations require that safety is demonstrated for a period of a million years. Consequently, the repository must be designed to resist the impact of several continental glaciers. Large, glacially induced, earthquakes near the repository have the potential of triggering slip along fractures across the canisters containing the nuclear wastes, thereby simultaneously jeopardising isolation, retardation and, hence, long term safety. It has therefore been crucial to assess the impact of such intraplate earthquake upon the primary functions of the repository. We conclude that, by appropriate design of the repository, the negative impact of earthquakes on long term safety can be considerably lessened. We were, additionally, able to demonstrate compliance with Swedish regulations in our safety assessment, SR-Site, submitted to the authorities earlier this year. However, the assessment required a number of critical assumptions, e.g. concerning the strain rate and the fracture properties of the rock, many of which are subject of current research in the geoscientific community. By a conservative approach, though, we judge to have adequately propagated critical uncertainties through the assessment and bound the uncertainty space.

Application of the Pareto principle to identify and address drug-therapy safety issues.

PubMed

Müller, Fabian; Dormann, Harald; Pfistermeister, Barbara; Sonst, Anja; Patapovas, Andrius; Vogler, Renate; Hartmann, Nina; Plank-Kiegele, Bettina; Kirchner, Melanie; Bürkle, Thomas; Maas, Renke

2014-06-01

Adverse drug events (ADE) and medication errors (ME) are common causes of morbidity in patients presenting at emergency departments (ED). Recognition of ADE as being drug related and prevention of ME are key to enhancing pharmacotherapy safety in ED. We assessed the applicability of the Pareto principle (~80 % of effects result from 20 % of causes) to address locally relevant problems of drug therapy. In 752 cases consecutively admitted to the nontraumatic ED of a major regional hospital, ADE, ME, contributing drugs, preventability, and detection rates of ADE by ED staff were investigated. Symptoms, errors, and drugs were sorted by frequency in order to apply the Pareto principle. In total, 242 ADE were observed, and 148 (61.2 %) were assessed as preventable. ADE contributed to 110 inpatient hospitalizations. The ten most frequent symptoms were causally involved in 88 (80.0 %) inpatient hospitalizations. Only 45 (18.6 %) ADE were recognized as drug-related problems until discharge from the ED. A limited set of 33 drugs accounted for 184 (76.0 %) ADE; ME contributed to 57 ADE. Frequency-based listing of ADE, ME, and drugs involved allowed identification of the most relevant problems and development of easily to implement safety measures, such as wall and pocket charts. The Pareto principle provides a method for identifying the locally most relevant ADE, ME, and involved drugs. This permits subsequent development of interventions to increase patient safety in the ED admission process that best suit local needs.

Strategic characterization of anti-drug antibody responses for the assessment of clinical relevance and impact.

PubMed

Tatarewicz, Suzanna M; Mytych, Daniel T; Manning, Marta Starcevic; Swanson, Steven J; Moxness, Michael S; Chirmule, Narendra

2014-06-01

All therapeutic proteins have the potential to induce anti-drug antibodies (ADA). Clinically relevant ADA can impact efficacy and/or safety of a biological therapeutic. Immunogenicity assessment strategy evaluates binding and neutralizing ADA, and the need for additional characterization (e.g., epitope, titer and so on) is determined using a risk-based approach. The choice of characterization assays depends on the type, application and immunogenicity of the therapeutic. ADA characterization can impact the interpretation of the risk profile of a given therapeutic, and offers insight into opportunities for risk mitigation and management. This article describes common ADA characterization methods. Strategic assessment and characterization of clinically relevant ADA are discussed, in order to support clinical options for safe and effective patient care and disease management.

A patient safety objective structured clinical examination.

PubMed

Singh, Ranjit; Singh, Ashok; Fish, Reva; McLean, Don; Anderson, Diana R; Singh, Gurdev

2009-06-01

There are international calls for improving education for health care workers around certain core competencies, of which patient safety and quality are integral and transcendent parts. Although relevant teaching programs have been developed, little is known about how best to assess their effectiveness. The objective of this work was to develop and implement an objective structured clinical examination (OSCE) to evaluate the impact of a patient safety curriculum. The curriculum was implemented in a family medicine residency program with 47 trainees. Two years after commencing the curriculum, a patient safety OSCE was developed and administered at this program and, for comparison purposes, to incoming residents at the same program and to residents at a neighboring residency program. All 47 residents exposed to the training, all 16 incoming residents, and 10 of 12 residents at the neighboring program participated in the OSCE. In a standardized patient case, error detection and error disclosure skills were better among trained residents. In a chart-based case, trained residents showed better performance in identifying deficiencies in care and described more appropriate means of addressing them. Third year residents exposed to a "Systems Approach" course performed better at system analysis and identifying system-based solutions after the course than before. Results suggest increased systems thinking and inculcation of a culture of safety among residents exposed to a patient safety curriculum. The main weaknesses of the study are its small size and suboptimal design. Much further investigation is needed into the effectiveness of patient safety curricula.

Iso standardization of theoretical activity evaluation method for low and intermediate level activated waste generated at nuclear power plants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Makoto Kashiwagi; Garamszeghy, Mike; Lantes, Bertrand

Disposal of low-and intermediate-level activated waste generated at nuclear power plants is being planned or carried out in many countries. The radioactivity concentrations and/or total quantities of long-lived, difficult-to-measure nuclides (DTM nuclides), such as C-14, Ni-63, Nb-94, α emitting nuclides etc., are often restricted by the safety case for a final repository as determined by each country's safety regulations, and these concentrations or amounts are required to be known and declared. With respect to waste contaminated by contact with process water, the Scaling Factor method (SF method), which is empirically based on sampling and analysis data, has been applied asmore » an important method for determining concentrations of DTM nuclides. This method was standardized by the International Organization for Standardization (ISO) and published in 2007 as ISO21238 'Scaling factor method to determine the radioactivity of low and intermediate-level radioactive waste packages generated at nuclear power plants' [1]. However, for activated metal waste with comparatively high concentrations of radioactivity, such as may be found in reactor control rods and internal structures, direct sampling and radiochemical analysis methods to evaluate the DTM nuclides are limited by access to the material and potentially high personnel radiation exposure. In this case, theoretical calculation methods in combination with empirical methods based on remote radiation surveys need to be used to best advantage for determining the disposal inventory of DTM nuclides while minimizing exposure to radiation workers. Pursuant to this objective a standard for the theoretical evaluation of the radioactivity concentration of DTM nuclides in activated waste, is in process through ISO TC85/SC5 (ISO Technical Committee 85: Nuclear energy, nuclear technologies, and radiological protection; Subcommittee 5: Nuclear fuel cycle). The project team for this ISO standard was formed in 2011 and is

Towards an International Classification for Patient Safety: the conceptual framework.

PubMed

Sherman, Heather; Castro, Gerard; Fletcher, Martin; Hatlie, Martin; Hibbert, Peter; Jakob, Robert; Koss, Richard; Lewalle, Pierre; Loeb, Jerod; Perneger, Thomas; Runciman, William; Thomson, Richard; Van Der Schaaf, Tjerk; Virtanen, Martti

2009-02-01

Global advances in patient safety have been hampered by the lack of a uniform classification of patient safety concepts. This is a significant barrier to developing strategies to reduce risk, performing evidence-based research and evaluating existing healthcare policies relevant to patient safety. Since 2005, the World Health Organization's World Alliance for Patient Safety has undertaken the Project to Develop an International Classification for Patient Safety (ICPS) to devise a classification which transforms patient safety information collected from disparate systems into a common format to facilitate aggregation, analysis and learning across disciplines, borders and time. A drafting group, comprised of experts from the fields of patient safety, classification theory, health informatics, consumer/patient advocacy, law and medicine, identified and defined key patient safety concepts and developed an internationally agreed conceptual framework for the ICPS based upon existing patient safety classifications. The conceptual framework was iteratively improved through technical expert meetings and a two-stage web-based modified Delphi survey of over 250 international experts. This work culminated in a conceptual framework consisting of ten high level classes: incident type, patient outcomes, patient characteristics, incident characteristics, contributing factors/hazards, organizational outcomes, detection, mitigating factors, ameliorating actions and actions taken to reduce risk. While the framework for the ICPS is in place, several challenges remain. Concepts need to be defined, guidance for using the classification needs to be provided, and further real-world testing needs to occur to progressively refine the ICPS to ensure it is fit for purpose.

Prisoner reentry: a public health or public safety issue for social work practice?

PubMed

Patterson, George T

2013-01-01

A significant literature identifies the policy, economic, health, and social challenges that confront released prisoners. This literature also describes the public health and public safety risks associated with prisoner reentry, provides recommendations for improving the reentry process, and describes the effectiveness of prison-based programs on recidivism rates. Public health and public safety risks are particularly significant in communities where large numbers of prisoners are released and few evidence-based services exist. The purpose of this article is to describe the public health and public safety risks that released prisoners experience when they reenter communities, and to discuss the social justice issues relevant for social work practice.

Aviation and healthcare: a comparative review with implications for patient safety

PubMed Central

Parand, Anam; Soukup, Tayana; Reader, Tom; Sevdalis, Nick

2015-01-01

Safety in aviation has often been compared with safety in healthcare. Following a recent article in this journal, the UK government set up an Independent Patient Safety Investigation Service, to emulate a similar well-established body in aviation. On the basis of a detailed review of relevant publications that examine patient safety in the context of aviation practice, we have drawn up a table of comparative features and a conceptual framework for patient safety. Convergence and divergence of safety-related behaviours across aviation and healthcare were derived and documented. Key safety-related domains that emerged included Checklists, Training, Crew Resource Management, Sterile Cockpit, Investigation and Reporting of Incidents and Organisational Culture. We conclude that whilst healthcare has much to learn from aviation in certain key domains, the transfer of lessons from aviation to healthcare needs to be nuanced, with the specific characteristics and needs of healthcare borne in mind. On the basis of this review, it is recommended that healthcare should emulate aviation in its resourcing of staff who specialise in human factors and related psychological aspects of patient safety and staff wellbeing. Professional and post-qualification staff training could specifically include Cognitive Bias Avoidance Training, as this appears to play a key part in many errors relating to patient safety and staff wellbeing. PMID:26770817

Pyrrolizidine Alkaloids: Chemistry, Pharmacology, Toxicology and Food Safety.

PubMed

Moreira, Rute; Pereira, David M; Valentão, Patrícia; Andrade, Paula B

2018-06-05

Pyrrolizidine alkaloids (PA) are widely distributed in plants throughout the world, frequently in species relevant for human consumption. Apart from the toxicity that these molecules can cause in humans and livestock, PA are also known for their wide range of pharmacological properties, which can be exploited in drug discovery programs. In this work we review the current body of knowledge regarding the chemistry, toxicology, pharmacology and food safety of PA.

Automotive HUDs: the overlooked safety issues.

PubMed

Tufano, D R

1997-06-01

The transfer of tactical aviation technology into automobiles is creating information display requirements that are likely to be met by use of the head-up display (HUD). These developments are based largely on conclusions that the HUD-related safety issues raised in the aviation HUD literature can be dismissed and that the benefits of using HUDs are certain. Such conclusions either neglect relevant research or are supported by a very small amount of evidence, much of which is either irrelevant or generated within a flawed methodological paradigm. This critical review covers the issues of (a) HUD focal distance and its effect on the perception of outside objects and (b) the effects of HUD imagery on visual attention. The issues of focal distance, cognitive capture, and the inherent connection between the two may have a greater impact on safety in the automotive context than they do in aviation.

First cross-section measurements of the reactions Ag,109107(p ,γ )Cd,110108 at energies relevant to the p process

NASA Astrophysics Data System (ADS)

Khaliel, A.; Mertzimekis, T. J.; Asimakopoulou, E.-M.; Kanellakopoulos, A.; Lagaki, V.; Psaltis, A.; Psyrra, I.; Mavrommatis, E.

2017-09-01

Background: One of the primary objectives of the field of Nuclear Astrophysics is the study of the elemental and isotopic abundances in the universe. Although significant progress has been made in understanding the mechanisms behind the production of a large number of nuclides in the isotopic chart, there are still many open questions regarding a number of neutron-deficient nuclei, the p nuclei. To that end, experimentally deduced nuclear reaction cross sections can provide invaluable input to astrophysical models. Purpose: The reactions Ag,109107(p ,γ )Cd,110108 have been studied at energies inside the astrophysically relevant energy window in an attempt to provide experimental data required for the testing of reaction-rate predictions in terms of the statistical model of Hauser-Feshbach around the p nucleus 108Cd. Methods: The experiments were performed with in-beam γ -ray spectroscopy with proton beams accelerated by the Tandem Van de Graaff Accelerator at NCSR "Demokritos" impinging a target of natural silver. A set of high-purity germanium detectors was employed to record the emitted radiation. Results: A first set of total cross-section measurements in radiative proton-capture reactions involving Ag,109107, producing the p -nucleus 108Cd, inside the astrophysically relevant energy window is reported. The experimental results are compared to theoretical calculations, using talys. An overall good agreement between the data and the theoretical calculations has been found. Conclusions: The results reported in this work add new information to the relatively unexplored p process. The present measurements can serve as a reference point in understanding the nuclear parameters in the related astrophysical environments and for future theoretical modeling and experimental works.

76 FR 65729 - Board of Scientific Counselors, National Institute for Occupational Safety and Health (BSC, NIOSH)

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-24

... Hazard Evaluations; (3) Occupational Safety and Health Workforce Needs Assessment; (4) and Future...) address current, relevant needs; and (3) produce intended results. Matters To Be Discussed: The agenda...

Point-of-Care Detection Devices for Food Safety Monitoring: Proactive Disease Prevention.

PubMed

Wu, Marie Yung-Chen; Hsu, Min-Yen; Chen, Shih-Jen; Hwang, De-Kuang; Yen, Tzung-Hai; Cheng, Chao-Min

2017-04-01

Food safety has become an increasingly significant public concern in both developed and under-developed nations around the world; it increases morbidity, mortality, human suffering, and economic burden. This Opinion focuses on (i) examining the influence of pathogens and chemicals (e.g., food additives and pesticide residue) on food-borne illnesses, (ii) summarizing food hazards that are present in Asia, and (iii) summarizing the array of current point-of-care (POC) detection devices that have potential applications in food safety monitoring. In addition, we provide insight into global healthcare issues in both developing and under-developed nations with a focus on bridging the gap between food safety issues in the public sector (associated with relevant clinical cases) and the use of POC detection devices for food safety monitoring. Copyright © 2016 Elsevier Ltd. All rights reserved.

Waste isolation safety assessment program. Task 4. Third contractor information meeting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1980-06-01

The Contractor Information Meeting (October 14 to 17, 1979) was part of the FY-1979 effort of Task 4 of the Waste Isolation Safety Assessment Program (WISAP): Sorption/Desorption Analysis. The objectives of this task are to: evaluate sorption/desorption measurement methods and develop a standardized measurement procedure; produce a generic data bank of nuclide-geologic interactions using a wide variety of geologic media and groundwaters; perform statistical analysis and synthesis of these data; perform validation studies to compare short-term laboratory studies to long-term in situ behavior; develop a fundamental understanding of sorption/desorption processes; produce x-ray and gamma-emitting isotopes suitable for the study ofmore » actinides at tracer concentrations; disseminate resulting information to the international technical community; and provide input data support for repository safety assessment. Conference participants included those subcontracted to WISAP Task 4, representatives and independent subcontractors to the Office of Nuclear Waste Isolation, representatives from other waste disposal programs, and experts in the area of waste/geologic media interaction. Since the meeting, WISAP has been divided into two programs: Assessment of Effectiveness of Geologic Isolation Systems (AEGIS) (modeling efforts) and Waste/Rock Interactions Technology (WRIT) (experimental work). The WRIT program encompasses the work conducted under Task 4. This report contains the information presented at the Task 4, Third Contractor Information Meeting. Technical Reports from the subcontractors, as well as Pacific Northwest Laboratory (PNL), are provided along with transcripts of the question-and-answer sessions. The agenda and abstracts of the presentations are also included. Appendix A is a list of the participants. Appendix B gives an overview of the WRIT program and details the WRIT work breakdown structure for 1980.« less

Need for an "integrated safety assessment" of GMOs, linking food safety and environmental considerations.

PubMed

Haslberger, Alexander G

2006-05-03

Evidence for substantial environmental influences on health and food safety comes from work with environmental health indicators which show that agroenvironmental practices have direct and indirect effects on human health, concluding that "the quality of the environment influences the quality and safety of foods" [Fennema, O. Environ. Health Perspect. 1990, 86, 229-232). In the field of genetically modified organisms (GMOs), Codex principles have been established for the assessment of GM food safety and the Cartagena Protocol on Biosafety outlines international principles for an environmental assessment of living modified organisms. Both concepts also contain starting points for an assessment of health/food safety effects of GMOs in cases when the environment is involved in the chain of events that could lead to hazards. The environment can act as a route of unintentional entry of GMOs into the food supply, such as in the case of gene flow via pollen or seeds from GM crops, but the environment can also be involved in changes of GMO-induced agricultural practices with relevance for health/food safety. Examples for this include potential regional changes of pesticide uses and reduction in pesticide poisonings resulting from the use of Bt crops or influences on immune responses via cross-reactivity. Clearly, modern methods of biotechnology in breeding are involved in the reasons behind the rapid reduction of local varieties in agrodiversity, which constitute an identified hazard for food safety and food security. The health/food safety assessment of GM foods in cases when the environment is involved needs to be informed by data from environmental assessment. Such data might be especially important for hazard identification and exposure assessment. International organizations working in these areas will very likely be needed to initiate and enable cooperation between those institutions responsible for the different assessments, as well as for exchange and analysis of

Review of quality assessment tools for the evaluation of pharmacoepidemiological safety studies

PubMed Central

Neyarapally, George A; Hammad, Tarek A; Pinheiro, Simone P; Iyasu, Solomon

2012-01-01

Objectives Pharmacoepidemiological studies are an important hypothesis-testing tool in the evaluation of postmarketing drug safety. Despite the potential to produce robust value-added data, interpretation of findings can be hindered due to well-recognised methodological limitations of these studies. Therefore, assessment of their quality is essential to evaluating their credibility. The objective of this review was to evaluate the suitability and relevance of available tools for the assessment of pharmacoepidemiological safety studies. Design We created an a priori assessment framework consisting of reporting elements (REs) and quality assessment attributes (QAAs). A comprehensive literature search identified distinct assessment tools and the prespecified elements and attributes were evaluated. Primary and secondary outcome measures The primary outcome measure was the percentage representation of each domain, RE and QAA for the quality assessment tools. Results A total of 61 tools were reviewed. Most tools were not designed to evaluate pharmacoepidemiological safety studies. More than 50% of the reviewed tools considered REs under the research aims, analytical approach, outcome definition and ascertainment, study population and exposure definition and ascertainment domains. REs under the discussion and interpretation, results and study team domains were considered in less than 40% of the tools. Except for the data source domain, quality attributes were considered in less than 50% of the tools. Conclusions Many tools failed to include critical assessment elements relevant to observational pharmacoepidemiological safety studies and did not distinguish between REs and QAAs. Further, there is a lack of considerations on the relative weights of different domains and elements. The development of a quality assessment tool would facilitate consistent, objective and evidence-based assessments of pharmacoepidemiological safety studies. PMID:23015600

A Systematic Review of Community Interventions to Improve Aboriginal Child Passenger Safety

PubMed Central

Oudie, Eugenia; Desapriya, Ediriweera; Turcotte, Kate; Pike, Ian

2014-01-01

We evaluated evidence of community interventions to improve Aboriginal child passenger safety (CPS) in terms of its scientific merit and cultural relevance. We included studies if they reported interventions to improve CPS in Aboriginal communities, compared at least pre- and postintervention conditions, and evaluated rates and severity of child passenger injuries, child restraint use, or knowledge of CPS. We also appraised quality and cultural relevance of studies. Study quality was associated with community participation and cultural relevance. Strong evidence showed that multicomponent interventions tailored to each community improves CPS. Interventions in Aboriginal communities should incorporate Aboriginal views of health, involve the community, and be multicomponent and tailored to the community’s circumstances and culture. PMID:24754652

Safety assessment guidance in the International Atomic Energy Agency RADWASS Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vovk, I.F.; Seitz, R.R.

1995-12-31

The IAEA RADWASS programme is aimed at establishing a coherent and comprehensive set of principles and standards for the safe management of waste and formulating the guidelines necessary for their application. A large portion of this programme has been devoted to safety assessments for various waste management activities. Five Safety Guides are planned to be developed to provide general guidance to enable operators and regulators to develop necessary framework for safety assessment process in accordance with international recommendations. They cover predisposal, near surface disposal, geological disposal, uranium/thorium mining and milling waste, and decommissioning and environmental restoration. The Guide on safetymore » assessment for near surface disposal is at the most advanced stage of preparation. This draft Safety Guide contains guidance on description of the disposal system, development of a conceptual model, identification and description of relevant scenarios and pathways, consequence analysis, presentation of results and confidence building. The set of RADWASS publications is currently undergoing in-depth review to ensure a harmonized approach throughout the Safety Series.« less

Editorial: emerging issues in sociotechnical systems thinking and workplace safety.

PubMed

Noy, Y Ian; Hettinger, Lawrence J; Dainoff, Marvin J; Carayon, Pascale; Leveson, Nancy G; Robertson, Michelle M; Courtney, Theodore K

2015-01-01

The burden of on-the-job accidents and fatalities and the harm of associated human suffering continue to present an important challenge for safety researchers and practitioners. While significant improvements have been achieved in recent decades, the workplace accident rate remains unacceptably high. This has spurred interest in the development of novel research approaches, with particular interest in the systemic influences of social/organisational and technological factors. In response, the Hopkinton Conference on Sociotechnical Systems and Safety was organised to assess the current state of knowledge in the area and to identify research priorities. Over the course of several months prior to the conference, leading international experts drafted collaborative, state-of-the-art reviews covering various aspects of sociotechnical systems and safety. These papers, presented in this special issue, cover topics ranging from the identification of key concepts and definitions to sociotechnical characteristics of safe and unsafe organisations. This paper provides an overview of the conference and introduces key themes and topics. Sociotechnical approaches to workplace safety are intended to draw practitioners' attention to the critical influence that systemic social/organisational and technological factors exert on safety-relevant outcomes. This paper introduces major themes addressed in the Hopkinton Conference within the context of current workplace safety research and practice challenges.

Editorial: emerging issues in sociotechnical systems thinking and workplace safety

PubMed Central

Noy, Y. Ian; Hettinger, Lawrence J.; Dainoff, Marvin J.; Carayon, Pascale; Leveson, Nancy G.; Robertson, Michelle M.; Courtney, Theodore K.

2015-01-01

The burden of on-the-job accidents and fatalities and the harm of associated human suffering continue to present an important challenge for safety researchers and practitioners. While significant improvements have been achieved in recent decades, the workplace accident rate remains unacceptably high. This has spurred interest in the development of novel research approaches, with particular interest in the systemic influences of social/organisational and technological factors. In response, the Hopkinton Conference on Sociotechnical Systems and Safety was organised to assess the current state of knowledge in the area and to identify research priorities. Over the course of several months prior to the conference, leading international experts drafted collaborative, state-of-the-art reviews covering various aspects of sociotechnical systems and safety. These papers, presented in this special issue, cover topics ranging from the identification of key concepts and definitions to sociotechnical characteristics of safe and unsafe organisations. This paper provides an overview of the conference and introduces key themes and topics. Practitioner Summary: Sociotechnical approaches to workplace safety are intended to draw practitioners' attention to the critical influence that systemic social/organisational and technological factors exert on safety-relevant outcomes. This paper introduces major themes addressed in the Hopkinton Conference within the context of current workplace safety research and practice challenges. PMID:25819595

The relevance of gene transfer to the safety of food and feed derived from genetically modified (GM) plants.

PubMed

van den Eede, G; Aarts, H; Buhk, H-J; Corthier, G; Flint, H J; Hammes, W; Jacobsen, B; Midtvedt, T; van der Vossen, J; von Wright, A; Wackernagel, W; Wilcks, A

2004-07-01

In 2000, the thematic network ENTRANSFOOD was launched to assess four different topics that are all related to the testing or assessment of food containing or produced from genetically modified organisms (GMOs). Each of the topics was linked to a European Commission (EC)-funded large shared cost action (see http://www.entransfood.com). Since the exchange of genetic information through horizontal (lateral) gene transfer (HGT) might play a more important role, in quantity and quality, than hitherto imagined, a working group dealing with HGT in the context of food and feed safety was established. This working group was linked to the GMOBILITY project (GMOBILITY, 2003) and the results of the deliberations are laid down in this review paper. HGT is reviewed in relation to the potential risks of consuming food or feed derived from transgenic crops. First, the mechanisms for obtaining transgenic crops are described. Next, HGT mechanisms and its possible evolutionary role are described. The use of marker genes is presented in detail as a special case for genes that may pose a risk. Furthermore, the exposure to GMOs and in particular to genetically modified (GM) deoxyribonucleic acid (DNA) is discussed as part of the total risk assessment. The review finishes off with a number of conclusions related to GM food and feed safety. The aim of this paper is to provide a comprehensive overview to assist risk assessors as well as regulators and the general public in understanding the safety issues related to these mechanisms. Copryright 2004 Elsevier Ltd.

Overview of the "epigenetic end points in toxicologic pathology and relevance to human health" session of the 2014 Society Of Toxicologic Pathology Annual Symposium.

PubMed

Hoenerhoff, Mark J; Hartke, James

2015-01-01

The theme of the Society of Toxicologic Pathology 2014 Annual Symposium was "Translational Pathology: Relevance of Toxicologic Pathology to Human Health." The 5th session focused on epigenetic end points in biology, toxicity, and carcinogenicity, and how those end points are relevant to human exposures. This overview highlights the various presentations in this session, discussing integration of epigenetics end points in toxicologic pathology studies, investigating the role of epigenetics in product safety assessment, epigenetic changes in cancers, methodologies to detect them, and potential therapies, chromatin remodeling in development and disease, and epigenomics and the microbiome. The purpose of this overview is to discuss the application of epigenetics to toxicologic pathology and its utility in preclinical or mechanistic based safety, efficacy, and carcinogenicity studies. © 2014 by The Author(s).

Using naturalistic driving data to explore the association between traffic safety-related events and crash risk at driver level.

PubMed

Wu, Kun-Feng; Aguero-Valverde, Jonathan; Jovanis, Paul P

2014-11-01

There has been considerable research conducted over the last 40 years using traffic safety-related events to support road safety analyses. Dating back to traffic conflict studies from the 1960s these observational studies of driver behavior have been criticized due to: poor quality data; lack of available and useful exposure measures linked to the observations; the incomparability of self-reported safety-related events; and, the difficulty in assessing culpability for safety-related events. This study seeks to explore the relationships between driver characteristics and traffic safety-related events, and between traffic safety-related events and crash involvement while mitigating some of those limitations. The Virginia Tech Transportation Institute 100-Car Naturalistic Driving Study dataset, in which the participants' vehicles were instrumented with various cameras and sensors during the study period, was used for this study. The study data set includes 90 drivers observed for 12-13 months driving. This study focuses on single vehicle run-off-road safety-related events only, including 14 crashes and 182 safety-related events (30 near crashes, and 152 crash-relevant incidents). Among the findings are: (1) drivers under age 25 are significantly more likely to be involved in safety-related events and crashes; and (2) significantly positive correlations exist between crashes, near crashes, and crash-relevant incidents. Although there is still much to learn about the factors affecting the positive correlation between safety-related events and crashes, a Bayesian multivariate Poisson log-normal model is shown to be useful to quantify the associations between safety-related events and crash risk while controlling for driver characteristics. Copyright © 2014 Elsevier Ltd. All rights reserved.

Fall Protection Characteristics of Safety Belts and Human Impact Tolerance

PubMed Central

HINO, Yasumichi; OHDO, Katsutoshi; TAKAHASHI, Hiroki

2014-01-01

Abstract: Many fatal accidents due to falls from heights have occurred at construction sites not only in Japan but also in other countries. This study aims to determine the fall prevention performance of two types of safety belts: a body belt1), which has been used for more than 40 yr in the Japanese construction industry as a general type of safety equipment for fall accident prevention, and a full harness2, 3), which has been used in many other countries. To determine human tolerance for impact trauma, this study discusses features of safety belts with reference4,5,6,7,8,9) to relevant studies in the medical science, automobile crash safety, and aircrew safety. For this purpose, simple drop tests were carried out in a virtual workplace to measure impact load, head acceleration, and posture in the experiments, the Hybrid-III pedestrian model10) was used as a human dummy. Hybrid-III is typically employed in official automobile crash tests (New Car Assessment Program: NCAP) and is currently recognized as a model that faithfully reproduces dynamic responses. Experimental results shows that safety performance strongly depends on both the variety of safety belts used and the shock absorbers attached onto lanyards. These findings indicate that fall prevention equipment, such as safety belts, lanyards, and shock absorbers, must be improved to reduce impact injuries to the human head and body during falls. PMID:25345426

Recommendations for safety planning, data collection, evaluation and reporting during drug, biologic and vaccine development: a report of the safety planning, evaluation, and reporting team.

PubMed

Crowe, Brenda J; Xia, H Amy; Berlin, Jesse A; Watson, Douglas J; Shi, Hongliang; Lin, Stephen L; Kuebler, Juergen; Schriver, Robert C; Santanello, Nancy C; Rochester, George; Porter, Jane B; Oster, Manfred; Mehrotra, Devan V; Li, Zhengqing; King, Eileen C; Harpur, Ernest S; Hall, David B

2009-10-01

The Safety Planning, Evaluation and Reporting Team (SPERT) was formed in 2006 by the Pharmaceutical Research and Manufacturers of America. SPERT's goal was to propose a pharmaceutical industry standard for safety planning, data collection, evaluation, and reporting, beginning with planning first-in-human studies and continuing through the planning of the post-product-approval period. SPERT's recommendations are based on our review of relevant literature and on consensus reached in our discussions. An important recommendation is that sponsors create a Program Safety Analysis Plan early in development. We also give recommendations for the planning of repeated, cumulative meta-analyses of the safety data obtained from the studies conducted within the development program. These include clear definitions of adverse events of special interest and standardization of many aspects of data collection and study design. We describe a 3-tier system for signal detection and analysis of adverse events and highlight proposals for reducing "false positive" safety findings. We recommend that sponsors review the aggregated safety data on a regular and ongoing basis throughout the development program, rather than waiting until the time of submission. We recognize that there may be other valid approaches. The proactive approach we advocate has the potential to benefit patients and health care providers by providing more comprehensive safety information at the time of new product marketing and beyond.

Fall prevention and safety communication training for foremen:Report of a pilot project designed to improve residential construction safety

PubMed Central

Kaskutas, Vicki; Dale, Ann Marie; Lipscomb, Hester; Evanoff, Brad

2013-01-01

Problem Falls from heights account for 64% of residential construction worker fatalities and 20% of missed work days. We hypothesized that worker safety would improve with foremen training in fall prevention and safety communication. Method Training priorities identified through foreman and apprentice focus groups and surveys were integrated into an 8-hour training. We piloted the training with ten foremen employed by a residential builder. Carpenter trainers contrasted proper methods to protect workers from falls with methods observed at the foremen’s worksites. Trainers presented methods to deliver toolbox talks and safety messages. Results from worksite observational audits (n=29) and foremen/crewmember surveys (n=97) administered before and after training were compared. Results We found that inexperienced workers are exposed to many fall hazards that they are often not prepared to negotiate. Fall protection is used inconsistently and worksite mentorship is often inadequate. Foremen feel pressured to meet productivity demands and some are unsure of the fall protection requirements. After the training, the frequency of daily mentoring and toolbox talks increased, and these talks became more interactive and focused on hazardous daily work tasks. Foremen observed their worksites for fall hazards more often. We observed increased compliance with fall protection and decreased unsafe behaviors during worksite audits. Discussion Designing the training to meet both foremen’s and crewmembers’ needs ensured the training was learner-centered and contextually-relevant. This pilot suggests that training residential foremen can increase use of fall protection, improve safety behaviors, and enhance on-the-job training and safety communication at their worksites. Impact on Industry Construction workers’ training should target safety communication and mentoring skills with workers who will lead work crews. Interventions at multiple levels are necessary to increase safety

Fall prevention and safety communication training for foremen: report of a pilot project designed to improve residential construction safety.

PubMed

Kaskutas, Vicki; Dale, Ann Marie; Lipscomb, Hester; Evanoff, Brad

2013-02-01

Falls from heights account for 64% of residential construction worker fatalities and 20% of missed work days. We hypothesized that worker safety would improve with foremen training in fall prevention and safety communication. Training priorities identified through foreman and apprentice focus groups and surveys were integrated into an 8-hour training. We piloted the training with ten foremen employed by a residential builder. Carpenter trainers contrasted proper methods to protect workers from falls with methods observed at the foremen's worksites. Trainers presented methods to deliver toolbox talks and safety messages. Results from worksite observational audits (n=29) and foremen/crewmember surveys (n=97) administered before and after training were compared. We found that inexperienced workers are exposed to many fall hazards that they are often not prepared to negotiate. Fall protection is used inconsistently and worksite mentorship is often inadequate. Foremen feel pressured to meet productivity demands and some are unsure of the fall protection requirements. After the training, the frequency of daily mentoring and toolbox talks increased, and these talks became more interactive and focused on hazardous daily work tasks. Foremen observed their worksites for fall hazards more often. We observed increased compliance with fall protection and decreased unsafe behaviors during worksite audits. Designing the training to meet both foremen's and crewmembers' needs ensured the training was learner-centered and contextually-relevant. This pilot suggests that training residential foremen can increase use of fall protection, improve safety behaviors, and enhance on-the-job training and safety communication at their worksites. Construction workers' training should target safety communication and mentoring skills with workers who will lead work crews. Interventions at multiple levels are necessary to increase safety compliance in residential construction and decrease falls

You can't improve what you don't measure: Safety climate measures available in the German-speaking countries to support safety culture development in healthcare.

PubMed

Manser, Tanja; Brösterhaus, Mareen; Hammer, Antje

2016-01-01

Safety climate measurement is a key input into safety culture development. The aim of this review is to provide an overview of the safety climate measures that have been evaluated for their psychometric properties in a German-speaking country and to make recommendations on how to use them in quality and patient safety improvement. A systematic search strategy was implemented to obtain relevant articles. PubMed and Web of Science databases were searched, and 128 abstracts were identified. After application of limits, 33 full texts were retrieved for subsequent evaluation. Studies were included on the basis of predetermined inclusion criteria and independent assessment by two reviewers. Publications were reviewed concerning healthcare setting, target group, safety culture dimensions covered and results of their psychometric evaluation. This review identified 11 instruments for safety climate assessment in different healthcare settings (i. e. hospitals, nursing homes, primary care, dental care and community pharmacy) for which acceptable to good internal consistency was reported. We observed wide variability concerning the number of dimensions (1 to 14; in some cases including outcome dimensions) and items (9 to 128) that the instruments were comprised of. Nevertheless, consistency with regard to the thematic areas covered was rather high. While there is clear evidence that we can assess safety climate in healthcare, the application of safety climate measures by quality and patient safety practitioners has so far been rather limited. This review bridges this gap between research and improvement practice by highlighting the central role of safety climate assessment in a mixed methods approach to inform safety culture development. Copyright © 2016. Published by Elsevier GmbH.

Toward detection of supernova event near the earth based on high-resolution analysis of cosmogenic nuclide 10Be in marine sediments

NASA Astrophysics Data System (ADS)

Takiguchi, S.; Suganuma, Y.; Kataoka, R.; Yamaguchi, K. E.

2017-12-01

Cosmic rays react with substances in the Earth's atmosphere and form cosmogenic nuclides. The flux would abruptly increase with nearby supernova or terrestrial magnetic events such as reversal or excursion of terrestrial magnetism. The Earth must have been exposed to cosmic ray radiation for as long as 10 Ma, if any, by nearby supernova activities (Kataoka et al., 2014). Increased and prolonged activity of cosmic rays would affect Earth's climate through forming greenhouse gases and biosphere through damaging DNA. Therefore, interests have been growing as to whether and how past supernova events have ever left any fingerprints on them. However, detection of nearby supernova is still under debate (e.g., Knie et al., 2004) To detect long-term record of past supernova activities, we utilize cosmogenic nuclide 10Be because of its short residence time (1-2yr) in the atmosphere, simple transport process, and adequate half-life (1.36 kyr) which is nearly equivalent to the duration of present-day deep water circulation. Sediment samples collected from the equatorial western Pacific (706-825 kyr in age) were finely powdered and decomposed by mixed acids (HNO3, HF, and HClO4). Authigenic phase was also separated from bulk powders by leaching with a weak acid. Because quantitative separation of Be from samples is essential toward high-quality 10Be analysis, both Be-bearing fractions were applied to optimized anion exchange chromatography for Be separation, and Be abundance was measured by atomic absorption spectrometry. The 10Be abundance (10Be/9Be ratios) were measured by accelerator mass spectrometry. The authigenic phase showed temporal curve that is similar to that of bulk samples (Suganuma et al., 2012), reflecting the influence of relative paleo-intensity and utility of authigenic method. Increased data set in terms of sampling interval (density) and total age range would allow us to judge whether it could detect past supernova activities and how it appears when

Safety assurance of cosmetics in Japan: current situation and future prospects.

PubMed

Inomata, Shinji

2014-01-01

The Japanese Pharmaceutical Affairs Law distinguishes cosmetics from quasi-drugs, and specifies that they must have a mild effect on the human body and must be safe to use over the long term. Therefore, the safety of cosmetics needs to be thoroughly evaluated and confirmed, taking into account the type of cosmetic, application method, conditions of use and so on. Post-marketing surveys of customers' complaints and case reports of adverse effects are important to monitor and confirm the safety of products. Although manufacturing and marketing of cosmetics are becoming more globalized, the regulations relevant to cosmetics safety still vary from country to country. Thus, compliance with different regulations in various markets is a major issue for producers. In particular, further development of alternatives to animal testing remains an urgent global issue.

Data and software tools for gamma radiation spectral threat detection and nuclide identification algorithm development and evaluation

NASA Astrophysics Data System (ADS)

Portnoy, David; Fisher, Brian; Phifer, Daniel

2015-06-01

spectral data at 1 s time intervals, which represents data collected by a mobile system operating in a dynamic radiation background environment; and one that represents static measurements with a foreground spectrum (background plus source) and a background spectrum. These data include controlled variations in both Source Related Factors (nuclide, nuclide combinations, activities, distances, collection times, shielding configurations, and background spectra) and Detector Related Factors (currently only gain shifts, but resolution changes and non-linear energy calibration errors will be added soon). The software tools will allow the developer to evaluate the performance impact of each of these factors. Although this first implementation is somewhat limited in scope, considering only NaI-based detection systems and two application domains, it is hoped that (with community feedback) a wider range of detector types and applications will be included in the future. This article describes the methods used for dataset creation, the software validation/performance measurement tools, the performance metrics used, and examples of baseline performance.

Human factors and safety in emergency medicine

NASA Technical Reports Server (NTRS)

Schaefer, H. G.; Helmreich, R. L.; Scheidegger, D.

1994-01-01

A model based on an input process and outcome conceptualisation is suggested to address safety-relevant factors in emergency medicine. As shown in other dynamic and demanding environments, human factors play a decisive role in attaining high quality service. Attitudes held by health-care providers, organisational shells and work-cultural parameters determine communication, conflict resolution and workload distribution within and between teams. These factors should be taken into account to improve outcomes such as operational integrity, job satisfaction and morale.

Analysis of Managing Safety in Small Enterprises: Dual-Effects of Employee Prosocial Safety Behavior and Government Inspection

PubMed Central

2018-01-01

This paper aims to promote a national and international occupational health and safety (OHS) intervention for small and medium enterprises (SMEs) within internal and external resources. Based on the characteristics of small SME management, the work environment and occupational health may be positively affected by the dual-effects of employees and government. Evolutionary game theory is utilized to identify relevant interactions among the government, small enterprises, and employees. Furthermore, dynamic simulations of the evolutionary game model are used to explore stability strategies and to identify modes of equilibrium. PMID:29707574

Towards an International Classification for Patient Safety: the conceptual framework

PubMed Central

Sherman, Heather; Castro, Gerard; Fletcher, Martin; Hatlie, Martin; Hibbert, Peter; Jakob, Robert; Koss, Richard; Lewalle, Pierre; Loeb, Jerod; Perneger, Thomas; Runciman, William; Thomson, Richard; Van Der Schaaf, Tjerk; Virtanen, Martti

2009-01-01

Global advances in patient safety have been hampered by the lack of a uniform classification of patient safety concepts. This is a significant barrier to developing strategies to reduce risk, performing evidence-based research and evaluating existing healthcare policies relevant to patient safety. Since 2005, the World Health Organization's World Alliance for Patient Safety has undertaken the Project to Develop an International Classification for Patient Safety (ICPS) to devise a classification which transforms patient safety information collected from disparate systems into a common format to facilitate aggregation, analysis and learning across disciplines, borders and time. A drafting group, comprised of experts from the fields of patient safety, classification theory, health informatics, consumer/patient advocacy, law and medicine, identified and defined key patient safety concepts and developed an internationally agreed conceptual framework for the ICPS based upon existing patient safety classifications. The conceptual framework was iteratively improved through technical expert meetings and a two-stage web-based modified Delphi survey of over 250 international experts. This work culminated in a conceptual framework consisting of ten high level classes: incident type, patient outcomes, patient characteristics, incident characteristics, contributing factors/hazards, organizational outcomes, detection, mitigating factors, ameliorating actions and actions taken to reduce risk. While the framework for the ICPS is in place, several challenges remain. Concepts need to be defined, guidance for using the classification needs to be provided, and further real-world testing needs to occur to progressively refine the ICPS to ensure it is fit for purpose. PMID:19147595

The influence of survey duration on estimates of food intakes and its relevance for public health nutrition and food safety issues.

PubMed

Lambe, J; Kearney, J; Leclercq, C; Zunft, H F; De Henauw, S; Lamberg-Allardt, C J; Dunne, A; Gibney, M J

2000-02-01

To examine the influence of food consumption survey duration on estimates of percentage consumers, mean total population intakes and intakes among consumers only and to consider its relevance for public health nutrition and food safety issues. Prospective food consumption survey. A multicentre study in five centres in the European Union-Dublin, Ghent, Helsinki, Potsdam and Rome. Teenage subjects were recruited through schools; 948 (80%) out of 1180 subjects completed the survey. 14-day food diaries were used to collect the food consumption data. For mean total population intakes, 53% of the foods had slopes significantly different to 0 (P<0.05). In practical terms (g/day), these differences were small, with 41% of foods having differences of

Maternal worries, home safety behaviors, and perceived difficulties.

PubMed

Hendrickson, Sherry Garrett

2008-01-01

The aim of the study was to explore the worries, safety behaviors, and perceived difficulties in keeping children safe at home in a purposive sample of low-income, predominantly non-English speaking mothers as a foundation for later nursing interventions. This study was a qualitative, descriptive design with content analysis to identify maternal concerns, behaviors, and perceptions of home safety as part of a larger study. Eighty-two mothers, 64% of whom were monolingual Spanish-speakers, responded in writing to three semistructured interview questions. When mothers were unable to read and write the researcher wrote the responses, then read the content aloud for verification. A standardized probe for each question was posed to obtain richer responses. Data management included use of the software program NUD*IST and coding analyses following the Miles and Huberman guidelines (1994). Interpretations were translated into English for this report. The major worries were falling, health, kidnapping, and being hit by a car. The leading maternal behaviors were coded as being physically, verbally, and environmentally preventive. Mothers said that it was their role to provide safety, and that this role could be wearisome, such that constant supervision was difficult. Low-income mothers described their worries for their 1 to 4 year-old children, explored their behaviors for preventing injury, and discussed what made keeping children from harm difficult. Understanding how mothers keep children safe, the barriers to home safety, and effective safety behaviors are important to the health of children. The clinical relevance of this study includes building trust as clinicians plan assessment, intervention and evaluation of home safety to encourage dialog about concerns, safety behaviors, and barriers to keeping children from injury.

The translation of sports injury prevention and safety promotion knowledge: insights from key intermediary organisations.

PubMed

Bekker, Sheree; Paliadelis, Penny; Finch, Caroline F

2017-03-28

A recognised research-to-practice gap exists in the health research field of sports injury prevention and safety promotion. There is a need for improved insight into increasing the relevancy, accessibility and legitimacy of injury prevention and safety promotion research knowledge for sport settings. The role of key organisations as intermediaries in the process of health knowledge translation for sports settings remains under-explored, and this paper aims to determine, and describe, the processes of knowledge translation undertaken by a set of key organisations in developing and distributing injury prevention and safety promotion resources. The National Guidance for Australian Football Partnerships and Safety (NoGAPS) project provided the context for this study. Representatives from five key NoGAPS organisations participated in individual face-to-face interviews about organisational processes of knowledge translation. A qualitative descriptive methodology was used to analyse participants' descriptions of knowledge translation activities undertaken at their respective organisations. Several themes emerged around health knowledge translation processes and considerations, including (1) identifying a need for knowledge translation, (2) developing and disseminating resources, and (3) barriers and enablers to knowledge translation. This study provides insight into the processes that key organisations employ when developing and disseminating injury prevention and safety promotion resources within sport settings. The relevancy, accessibility and legitimacy of health research knowledge is foregrounded, with a view to increasing the influence of research on the development of health-related resources suitable for community sport settings.

[Infection control and safety culture in German hospitals].

PubMed

Hansen, Sonja; Schwab, Frank; Gropmann, Alexander; Behnke, Michael; Gastmeier, Petra

2016-07-01

Healthcare-associated infections (HAI) are the most frequent adverse events in the healthcare setting and their prevention is an important contribution to patient safety in hospitals. To analyse to what extent safety cultural aspects with relevance to infection control are implemented in German hospitals. Safety cultural aspects of infection control were surveyed with an online questionnaire; data were analysed descriptively. Data from 543 hospitals with a median of [IQR] 275 [157; 453] beds were analysed. Almost all hospitals (96.6 %) had internal guidelines for infection control (IC) in place; 82 % defined IC objectives, most often regarding hand hygiene (HH) (93 %) and multidrug resistant organisms (72 %) and less frequently for antibiotic stewardship (48 %) or prevention of specific HAI. In 94 % of hospitals, a reporting system for adverse events was in place, which was also used to report low compliance with HH, outbreaks and Clostridium difficile-associated infections. Members of the IC team were most often seen to hold daily responsibility for IC in the hospital, but rarely other hospital staff (94 versus 19 %). Safety cultural aspects are not fully implemented in German hospitals. IC should be more strongly implemented in healthcare workers' daily routine and more visibly supported by hospital management.

Do European hospitals have quality and safety governance systems and structures in place?

PubMed

Shaw, C; Kutryba, B; Crisp, H; Vallejo, P; Suñol, R

2009-02-01

Internal systems for quality and safety were assessed in 89 hospitals in six European states, by external teams using standardised criteria and procedures, as part of the Methods of Assessing Response to Quality Improvement Strategies (MARQuIS) project. The assessments were made primarily to identify the current use of quality management systems in the sample hospitals, and also to demonstrate a potential tool for comparable assessment of hospitals in general. The large majority of the hospitals had a formal, documented infrastructure to manage quality and safety, but a significant minority had no designated mission, programme or coordination. In two-thirds of hospitals, the governing body was active in defining policy and programmes for improvement, and received reports on quality, safety and patient satisfaction at least once a year. The brief on-site assessments identified systematic variations, within and between countries, in structures and processes of governance and to document the uptake of best practice. Unacceptable variations in practice could be reduced, to the benefit of consumers and providers, by developing and publishing basic organisational standards relevant to all European states. The simple assessment criteria designed for this project could be developed into a practical tool for self-assessment, peer review or benchmarking of hospitals across national borders. This assessment, combined with explicit, relevant and achievable standards, could provide a vehicle to promote the voluntary uptake of best practice and consistency in quality and safety among hospitals in Europe.

Morinda citrifolia (Noni) fruit--phytochemistry, pharmacology, safety.

PubMed

Potterat, Olivier; Hamburger, Matthias

2007-03-01

Products derived from Noni fruit (Morinda citrifolia) have been commercialised in the USA since the 1990s and are increasingly distributed all over the world. A large number of beneficial effects have been claimed for Noni. Fruit juice of Noni has been approved as a Novel Food by the European Commission in 2003. This article reviews current knowledge on the phytochemistry, pharmacology, safety aspects of Noni fruit and Noni-derived products, and health-related claims and benefits. The knowledge on the chemical composition of Noni fruit has considerably increased over recent years. A number of in vitro and, to a certain extent, in vivo studies demonstrate a range of potentially beneficial effects. However, clinical data are essentially lacking. To what extent the findings from experimental pharmacological studies are of potential clinical relevance is not clear at present. Based on a toxicological assessment, Noni juice was considered as safe. Due to recent reports of cases of hepatotoxicity, the safety issue has been re-examined in Europe. While the European Food Safety Authority sees no link between adverse effects on liver and consumption of Noni juice, a continuing monitoring of the situation is desirable and some vigilance advised.

Methodology to assess clinical liver safety data.

PubMed

Merz, Michael; Lee, Kwan R; Kullak-Ublick, Gerd A; Brueckner, Andreas; Watkins, Paul B

2014-11-01

Analysis of liver safety data has to be multivariate by nature and needs to take into account time dependency of observations. Current standard tools for liver safety assessment such as summary tables, individual data listings, and narratives address these requirements to a limited extent only. Using graphics in the context of a systematic workflow including predefined graph templates is a valuable addition to standard instruments, helping to ensure completeness of evaluation, and supporting both hypothesis generation and testing. Employing graphical workflows interactively allows analysis in a team-based setting and facilitates identification of the most suitable graphics for publishing and regulatory reporting. Another important tool is statistical outlier detection, accounting for the fact that for assessment of Drug-Induced Liver Injury, identification and thorough evaluation of extreme values has much more relevance than measures of central tendency in the data. Taken together, systematical graphical data exploration and statistical outlier detection may have the potential to significantly improve assessment and interpretation of clinical liver safety data. A workshop was convened to discuss best practices for the assessment of drug-induced liver injury (DILI) in clinical trials.

Making Science Relevant

ERIC Educational Resources Information Center

Eick, Charles; Deutsch, Bill; Fuller, Jennifer; Scott, Fletcher

2008-01-01

Science teachers are always looking for ways to demonstrate the relevance of science to students. By connecting science learning to important societal issues, teachers can motivate students to both enjoy and engage in relevant science (Bennet, Lubben, and Hogarth 2007). To develop that connection, teachers can help students take an active role in…

Cross-comparison of three surrogate safety methods to diagnose cyclist safety problems at intersections in Norway.

PubMed

Laureshyn, Aliaksei; Goede, Maartje de; Saunier, Nicolas; Fyhri, Aslak

2017-08-01

Relying on accident records as the main data source for studying cyclists' safety has many drawbacks, such as high degree of under-reporting, the lack of accident details and particularly of information about the interaction processes that led to the accident. It is also an ethical problem as one has to wait for accidents to happen in order to make a statement about cyclists' (un-)safety. In this perspective, the use of surrogate safety measures based on actual observations in traffic is very promising. In this study we used video data from three intersections in Norway that were all independently analysed using three methods: the Swedish traffic conflict technique (Swedish TCT), the Dutch conflict technique (DOCTOR) and the probabilistic surrogate measures of safety (PSMS) technique developed in Canada. The first two methods are based on manual detection and counting of critical events in traffic (traffic conflicts), while the third considers probabilities of multiple trajectories for each interaction and delivers a density map of potential collision points per site. Due to extensive use of microscopic data, PSMS technique relies heavily on automated tracking of the road users in video. Across the three sites, the methods show similarities or are at least "compatible" with the accident records. The two conflict techniques agree quite well for the number, type and location of conflicts, but some differences with no obvious explanation are also found. PSMS reports many more safety-relevant interactions including less severe events. The location of the potential collision points is compatible with what the conflict techniques suggest, but the possibly significant share of false alarms due to inaccurate trajectories extracted from video complicates the comparison. The tested techniques still require enhancement, with respect to better adjustment to analysis of the situations involving cyclists (and vulnerable road users in general) and further validation. However, we

Template protocol for clinical trials investigating vaccines—Focus on safety elements☆

PubMed Central

Bonhoeffer, Jan; Imoukhuede, Egeruan B.; Aldrovandi, Grace; Bachtiar, Novilia S.; Chan, Eng-Soon; Chang, Soju; Chen, Robert T.; Fernandopulle, Rohini; Goldenthal, Karen L.; Heffelfinger, James D.; Hossain, Shah; Jevaji, Indira; Khamesipour, Ali; Kochhar, Sonali; Makhene, Mamodikoe; Malkin, Elissa; Nalin, David; Prevots, Rebecca; Ramasamy, Ranjan; Sellers, Sarah; Vekemans, Johan; Walker, Kenneth B.; Wilson, Pam; Wong, Virginia; Zaman, Khalequz; Heininger, Ulrich

2015-01-01

This document is intended as a guide to the protocol development for trials of prophylactic vaccines. The template may serve phases I–IV clinical trials protocol development to include safety relevant information as required by the regulatory authorities and as deemed useful by the investigators. This document may also be helpful for future site strengthening efforts. PMID:23499603

Safety risk assessment for vertical concrete formwork activities in civil engineering construction.

PubMed

López-Arquillos, Antonio; Rubio-Romero, Juan Carlos; Gibb, Alistair G F; Gambatese, John A

2014-01-01

The construction sector has one of the worst occupational health and safety records in Europe. Of all construction tasks, formwork activities are associated with a high frequency of accidents and injuries. This paper presents an investigation of the activities and related safety risks present in vertical formwork for in-situ concrete construction in the civil engineering sector. Using the methodology of staticized groups, twelve activities and ten safety risks were identified and validated by experts. Every safety risk identified in this manner was quantified for each activity using binary methodology according to the frequency and severity scales developed in prior research. A panel of experts was selected according to the relevant literature on staticized groups. The results obtained show that the activities with the highest risk in vertical formwork tasks are: Plumbing and leveling of forms, cutting of material, handling materials with cranes, and climbing or descending ladders. The most dangerous health and safety risks detected were falls from height, cutting and overexertion. The research findings provide construction practitioners with further evidence of the hazardous activities associated with concrete formwork construction and a starting point for targeting worker health and safety programmes.

High-precision Penning trap mass measurements of 9,10Be and the one-neutron halo nuclide 11Be

NASA Astrophysics Data System (ADS)

Ringle, R.; Brodeur, M.; Brunner, T.; Ettenauer, S.; Smith, M.; Lapierre, A.; Ryjkov, V. L.; Delheij, P.; Drake, G. W. F.; Lassen, J.; Lunney, D.; Dilling, J.

2009-05-01

Penning trap mass measurements of 9Be, 10Be (t1 / 2 = 1.51 My), and the one-neutron halo nuclide 11Be (t1 / 2 = 13.8 s) have been performed using TITAN at TRIUMF. The resulting 11Be mass excess (ME = 20 177.60 (58) keV) is in agreement with the current Atomic Mass Evaluation (AME03) [G. Audi, et al., Nucl. Phys. A 729 (2003) 337] value, but is over an order of magnitude more precise. The precision of the mass values of 9,10Be have been improved by about a factor of four and reveal a ≈ 2 σ deviation from the AME mass values. Results of new atomic physics calculations are presented for the isotope shift of 11Be relative to 9Be, and it is shown that the new mass values essentially remove atomic mass uncertainties as a contributing factor in determining the relative nuclear charge radius from the isotope shift. The new mass values of 10,11Be also allow for a more precise determination of the single-neutron binding energy of the halo neutron in 11Be.

On a Solar Origin for the Cosmogenic Nuclide Event of 775 A.D.

NASA Technical Reports Server (NTRS)

Cliver, E. W.; Tylka, A. J.; Dietrich, W. F.; Ling, A. G.

2014-01-01

We explore requirements for a solar particle event (SPE) and flare capable of producing the cosmogenic nuclide event of 775 A.D., and review solar circumstances at that time. A solar source for 775 would require a greater than 1 GV spectrum approximately 45 times stronger than that of the intense high-energy SPE of 1956 February 23. This implies a greater than 30 MeV proton fluence (F(sub 30)) of approximately 8 × 10(exp 10) proton cm(exp -2), approximately 10 times larger than that of the strongest 3 month interval of SPE activity in the modern era. This inferred F(sub 30) value for the 775 SPE is inconsistent with the occurrence probability distribution for greater than 30 MeV solar proton events. The best guess value for the soft X-ray classification (total energy) of an associated flare is approximately X230 (approximately 9 × 10(exp 33) erg). For comparison, the flares on 2003 November 4 and 1859 September 1 had observed/inferred values of approximately X35 (approximately 10(exp 33) erg) and approximately X45 (approximately 2 × 10(exp 33) erg), respectively. The estimated size of the source active region for a approximately 10(exp 34) erg flare is approximately 2.5 times that of the largest region yet recorded. The 775 event occurred during a period of relatively low solar activity, with a peak smoothed amplitude about half that of the second half of the 20th century. The approximately 1945-1995 interval, the most active of the last approximately 2000 yr, failed to witness a SPE comparable to that required for the proposed solar event in 775. These considerations challenge a recent suggestion that the 775 event is likely of solar origin.

[Patient safety in home care - A review of international recommendations].

PubMed

Czakert, Judith; Lehmann, Yvonne; Ewers, Michael

2018-06-08

In recent years there has been a growing trend towards nursing care at home in general as well as towards intensive home care being provided by specialized home care services in Germany. However, resulting challenges for patient safety have rarely been considered. Against this background we aimed to explore whether international recommendations for patient safety in home care in general and in intensive home care in particular already exist and how they can stimulate further practice development in Germany. A review of online English documents containing recommendations for patient safety in intensive home care was conducted. Available documents were analyzed and compared in terms of their form and content. Overall, a small number of relevant documents could be identified. None of these documents exclusively refer to the intensive home care sector. Despite their differences, however, the analysis of four selected documents showed similarities, e. g., regarding specific topics of patient safety (communication, involvement of patients and their relatives, risk assessment, medication management, qualification). Furthermore, strengths and weaknesses of the documents became apparent: e. g., an explicit understanding of patient safety, a literature-based introduction to safety topics or an adaptation of the recommendations to the specific features of home care were occasionally lacking. This document analysis provides interesting input to the formal and content-related development of specific recommendations and to practice development in Germany to improve patient safety in home care. Copyright © 2018. Published by Elsevier GmbH.

Lattice quantum gravity and asymptotic safety

NASA Astrophysics Data System (ADS)

Laiho, J.; Bassler, S.; Coumbe, D.; Du, D.; Neelakanta, J. T.

2017-09-01

We study the nonperturbative formulation of quantum gravity defined via Euclidean dynamical triangulations (EDT) in an attempt to make contact with Weinberg's asymptotic safety scenario. We find that a fine-tuning is necessary in order to recover semiclassical behavior. Such a fine-tuning is generally associated with the breaking of a target symmetry by the lattice regulator; in this case we argue that the target symmetry is the general coordinate invariance of the theory. After introducing and fine-tuning a nontrivial local measure term, we find no barrier to taking a continuum limit, and we find evidence that four-dimensional, semiclassical geometries are recovered at long distance scales in the continuum limit. We also find that the spectral dimension at short distance scales is consistent with 3 /2 , a value that could resolve the tension between asymptotic safety and the holographic entropy scaling of black holes. We argue that the number of relevant couplings in the continuum theory is one, once symmetry breaking by the lattice regulator is accounted for. Such a theory is maximally predictive, with no adjustable parameters. The cosmological constant in Planck units is the only relevant parameter, which serves to set the lattice scale. The cosmological constant in Planck units is of order 1 in the ultraviolet and undergoes renormalization group running to small values in the infrared. If these findings hold up under further scrutiny, the lattice may provide a nonperturbative definition of a renormalizable quantum field theory of general relativity with no adjustable parameters and a cosmological constant that is naturally small in the infrared.

Development of an evaluation framework for African-European hospital patient safety partnerships.

PubMed

Rutter, Paul; Syed, Shamsuzzoha B; Storr, Julie; Hightower, Joyce D; Bagheri-Nejad, Sepideh; Kelley, Edward; Pittet, Didier

2014-04-01

Patient safety is recognised as a significant healthcare problem worldwide, and healthcare-associated infections are an important aspect. African Partnerships for Patient Safety is a WHO programme that pairs hospitals in Africa with hospitals in Europe with the objective to work together to improve patient safety. To describe the development of an evaluation framework for hospital-to-hospital partnerships participating in the programme. The framework was structured around the programme's three core objectives: facilitate strong interhospital partnerships, improve in-hospital patient safety and spread best practices nationally. Africa-based clinicians, their European partners and experts in patient safety were closely involved in developing the evaluation framework in an iterative process. The process defined six domains of partnership strength, each with measurable subdomains. We developed a questionnaire to measure these subdomains. Participants selected six indicators of hospital patient safety improvement from a short-list of 22 based on their relevance, sensitivity to intervention and measurement feasibility. Participants proposed 20 measures of spread, which were refined into a two-part conceptual framework, and a data capture tool created. Taking a highly participatory approach that closely involved its end users, we developed an evaluation framework and tools to measure partnership strength, patient safety improvements and the spread of best practice.

Patient safety in otolaryngology: a descriptive review.

PubMed

Danino, Julian; Muzaffar, Jameel; Metcalfe, Chris; Coulson, Chris

2017-03-01

Human evaluation and judgement may include errors that can have disastrous results. Within medicine and healthcare there has been slow progress towards major changes in safety. Healthcare lags behind other specialised industries, such as aviation and nuclear power, where there have been significant improvements in overall safety, especially in reducing risk of errors. Following several high profile cases in the USA during the 1990s, a report titled "To Err Is Human: Building a Safer Health System" was published. The report extrapolated that in the USA approximately 50,000 to 100,000 patients may die each year as a result of medical errors. Traditionally otolaryngology has always been regarded as a "safe specialty". A study in the USA in 2004 inferred that there may be 2600 cases of major morbidity and 165 deaths within the specialty. MEDLINE via PubMed interface was searched for English language articles published between 2000 and 2012. Each combined two or three of the keywords noted earlier. Limitations are related to several generic topics within patient safety in otolaryngology. Other areas covered have been current relevant topics due to recent interest or new advances in technology. There has been a heightened awareness within the healthcare community of patient safety; it has become a major priority. Focus has shifted from apportioning blame to prevention of the errors and implementation of patient safety mechanisms in healthcare delivery. Type of Errors can be divided into errors due to action and errors due to knowledge or planning. In healthcare there are several factors that may influence adverse events and patient safety. Although technology may improve patient safety, it also introduces new sources of error. The ability to work with people allows for the increase in safety netting. Team working has been shown to have a beneficial effect on patient safety. Any field of work involving human decision-making will always have a risk of error. Within

29 CFR 1960.12 - Dissemination of occupational safety and health program information.

Code of Federal Regulations, 2011 CFR

2011-07-01

... establishment, and keep posted, a poster informing employees of the provisions of the Act, Executive Order 12196... furnish the core text of a poster to agencies. Each agency shall add the following items: (1) Details of...) Relevant information about any agency safety and health committees. Such posters and additions shall not be...

29 CFR 1960.12 - Dissemination of occupational safety and health program information.

Code of Federal Regulations, 2013 CFR

2013-07-01

... establishment, and keep posted, a poster informing employees of the provisions of the Act, Executive Order 12196... furnish the core text of a poster to agencies. Each agency shall add the following items: (1) Details of...) Relevant information about any agency safety and health committees. Such posters and additions shall not be...

29 CFR 1960.12 - Dissemination of occupational safety and health program information.

Code of Federal Regulations, 2012 CFR

2012-07-01

... establishment, and keep posted, a poster informing employees of the provisions of the Act, Executive Order 12196... furnish the core text of a poster to agencies. Each agency shall add the following items: (1) Details of...) Relevant information about any agency safety and health committees. Such posters and additions shall not be...

29 CFR 1960.12 - Dissemination of occupational safety and health program information.

Code of Federal Regulations, 2010 CFR

2010-07-01

... establishment, and keep posted, a poster informing employees of the provisions of the Act, Executive Order 12196... furnish the core text of a poster to agencies. Each agency shall add the following items: (1) Details of...) Relevant information about any agency safety and health committees. Such posters and additions shall not be...

29 CFR 1960.12 - Dissemination of occupational safety and health program information.

Code of Federal Regulations, 2014 CFR

2014-07-01

... establishment, and keep posted, a poster informing employees of the provisions of the Act, Executive Order 12196... furnish the core text of a poster to agencies. Each agency shall add the following items: (1) Details of...) Relevant information about any agency safety and health committees. Such posters and additions shall not be...

The Safety Attitudes Questionnaire: psychometric properties, benchmarking data, and emerging research.

PubMed

Sexton, John B; Helmreich, Robert L; Neilands, Torsten B; Rowan, Kathy; Vella, Keryn; Boyden, James; Roberts, Peter R; Thomas, Eric J

2006-04-03

There is widespread interest in measuring healthcare provider attitudes about issues relevant to patient safety (often called safety climate or safety culture). Here we report the psychometric properties, establish benchmarking data, and discuss emerging areas of research with the University of Texas Safety Attitudes Questionnaire. Six cross-sectional surveys of health care providers (n = 10,843) in 203 clinical areas (including critical care units, operating rooms, inpatient settings, and ambulatory clinics) in three countries (USA, UK, New Zealand). Multilevel factor analyses yielded results at the clinical area level and the respondent nested within clinical area level. We report scale reliability, floor/ceiling effects, item factor loadings, inter-factor correlations, and percentage of respondents who agree with each item and scale. A six factor model of provider attitudes fit to the data at both the clinical area and respondent nested within clinical area levels. The factors were: Teamwork Climate, Safety Climate, Perceptions of Management, Job Satisfaction, Working Conditions, and Stress Recognition. Scale reliability was 0.9. Provider attitudes varied greatly both within and among organizations. Results are presented to allow benchmarking among organizations and emerging research is discussed. The Safety Attitudes Questionnaire demonstrated good psychometric properties. Healthcare organizations can use the survey to measure caregiver attitudes about six patient safety-related domains, to compare themselves with other organizations, to prompt interventions to improve safety attitudes and to measure the effectiveness of these interventions.

The Safety Attitudes Questionnaire: psychometric properties, benchmarking data, and emerging research

PubMed Central

Sexton, John B; Helmreich, Robert L; Neilands, Torsten B; Rowan, Kathy; Vella, Keryn; Boyden, James; Roberts, Peter R; Thomas, Eric J

2006-01-01

Background There is widespread interest in measuring healthcare provider attitudes about issues relevant to patient safety (often called safety climate or safety culture). Here we report the psychometric properties, establish benchmarking data, and discuss emerging areas of research with the University of Texas Safety Attitudes Questionnaire. Methods Six cross-sectional surveys of health care providers (n = 10,843) in 203 clinical areas (including critical care units, operating rooms, inpatient settings, and ambulatory clinics) in three countries (USA, UK, New Zealand). Multilevel factor analyses yielded results at the clinical area level and the respondent nested within clinical area level. We report scale reliability, floor/ceiling effects, item factor loadings, inter-factor correlations, and percentage of respondents who agree with each item and scale. Results A six factor model of provider attitudes fit to the data at both the clinical area and respondent nested within clinical area levels. The factors were: Teamwork Climate, Safety Climate, Perceptions of Management, Job Satisfaction, Working Conditions, and Stress Recognition. Scale reliability was 0.9. Provider attitudes varied greatly both within and among organizations. Results are presented to allow benchmarking among organizations and emerging research is discussed. Conclusion The Safety Attitudes Questionnaire demonstrated good psychometric properties. Healthcare organizations can use the survey to measure caregiver attitudes about six patient safety-related domains, to compare themselves with other organizations, to prompt interventions to improve safety attitudes and to measure the effectiveness of these interventions. PMID:16584553

System interface for an integrated intelligent safety system (ISS) for vehicle applications.

PubMed

Hannan, Mahammad A; Hussain, Aini; Samad, Salina A

2010-01-01

This paper deals with the interface-relevant activity of a vehicle integrated intelligent safety system (ISS) that includes an airbag deployment decision system (ADDS) and a tire pressure monitoring system (TPMS). A program is developed in LabWindows/CVI, using C for prototype implementation. The prototype is primarily concerned with the interconnection between hardware objects such as a load cell, web camera, accelerometer, TPM tire module and receiver module, DAQ card, CPU card and a touch screen. Several safety subsystems, including image processing, weight sensing and crash detection systems, are integrated, and their outputs are combined to yield intelligent decisions regarding airbag deployment. The integrated safety system also monitors tire pressure and temperature. Testing and experimentation with this ISS suggests that the system is unique, robust, intelligent, and appropriate for in-vehicle applications.

System Interface for an Integrated Intelligent Safety System (ISS) for Vehicle Applications

PubMed Central

Hannan, Mahammad A.; Hussain, Aini; Samad, Salina A.

2010-01-01

This paper deals with the interface-relevant activity of a vehicle integrated intelligent safety system (ISS) that includes an airbag deployment decision system (ADDS) and a tire pressure monitoring system (TPMS). A program is developed in LabWindows/CVI, using C for prototype implementation. The prototype is primarily concerned with the interconnection between hardware objects such as a load cell, web camera, accelerometer, TPM tire module and receiver module, DAQ card, CPU card and a touch screen. Several safety subsystems, including image processing, weight sensing and crash detection systems, are integrated, and their outputs are combined to yield intelligent decisions regarding airbag deployment. The integrated safety system also monitors tire pressure and temperature. Testing and experimentation with this ISS suggests that the system is unique, robust, intelligent, and appropriate for in-vehicle applications. PMID:22205861

System safety education focused on flight safety

NASA Technical Reports Server (NTRS)

Holt, E.

1971-01-01

The measures necessary for achieving higher levels of system safety are analyzed with an eye toward maintaining the combat capability of the Air Force. Several education courses were provided for personnel involved in safety management. Data include: (1) Flight Safety Officer Course, (2) Advanced Safety Program Management, (3) Fundamentals of System Safety, and (4) Quantitative Methods of Safety Analysis.

Labor unions and safety climate: perceived union safety values and retail employee safety outcomes.

PubMed

Sinclair, Robert R; Martin, James E; Sears, Lindsay E

2010-09-01

Although trade unions have long been recognized as a critical advocate for employee safety and health, safety climate research has not paid much attention to the role unions play in workplace safety. We proposed a multiple constituency model of workplace safety which focused on three central safety stakeholders: top management, ones' immediate supervisor, and the labor union. Safety climate research focuses on management and supervisors as key stakeholders, but has not considered whether employee perceptions about the priority their union places on safety contributes contribute to safety outcomes. We addressed this gap in the literature by investigating unionized retail employee (N=535) perceptions about the extent to which their top management, immediate supervisors, and union valued safety. Confirmatory factor analyses demonstrated that perceived union safety values could be distinguished from measures of safety training, workplace hazards, top management safety values, and supervisor values. Structural equation analyses indicated that union safety values influenced safety outcomes through its association with higher safety motivation, showing a similar effect as that of supervisor safety values. These findings highlight the need for further attention to union-focused measures related to workplace safety as well as further study of retail employees in general. We discuss the practical implications of our findings and identify several directions for future safety research. 2009 Elsevier Ltd. All rights reserved.

Are automatic systems the future of motorcycle safety? A novel methodology to prioritize potential safety solutions based on their projected effectiveness.

PubMed

Gil, Gustavo; Savino, Giovanni; Piantini, Simone; Baldanzini, Niccolò; Happee, Riender; Pierini, Marco

2017-11-17

Motorcycle riders are involved in significantly more crashes per kilometer driven than passenger car drivers. Nonetheless, the development and implementation of motorcycle safety systems lags far behind that of passenger cars. This research addresses the identification of the most effective motorcycle safety solutions in the context of different countries. A knowledge-based system of motorcycle safety (KBMS) was developed to assess the potential for various safety solutions to mitigate or avoid motorcycle crashes. First, a set of 26 common crash scenarios was identified from the analysis of multiple crash databases. Second, the relative effectiveness of 10 safety solutions was assessed for the 26 crash scenarios by a panel of experts. Third, relevant information about crashes was used to weigh the importance of each crash scenario in the region studied. The KBMS method was applied with an Italian database, with a total of more than 1 million motorcycle crashes in the period 2000-2012. When applied to the Italian context, the KBMS suggested that automatic systems designed to compensate for riders' or drivers' errors of commission or omission are the potentially most effective safety solution. The KBMS method showed an effective way to compare the potential of various safety solutions, through a scored list with the expected effectiveness of each safety solution for the region to which the crash data belong. A comparison of our results with a previous study that attempted a systematic prioritization of safety systems for motorcycles (PISa project) showed an encouraging agreement. Current results revealed that automatic systems have the greatest potential to improve motorcycle safety. Accumulating and encoding expertise in crash analysis from a range of disciplines into a scalable and reusable analytical tool, as proposed with the use of KBMS, has the potential to guide research and development of effective safety systems. As the expert assessment of the crash

Is It Safe? Reliability and Validity of Structured versus Unstructured Child Safety Judgments

ERIC Educational Resources Information Center

Bartelink, Cora; de Kwaadsteniet, Leontien; ten Berge, Ingrid J.; Witteman, Cilia L. M.

2017-01-01

Background: The LIRIK, an instrument for the assessment of child safety and risk, is designed to improve assessments by guiding professionals through a structured evaluation of relevant signs, risk factors, and protective factors. Objective: We aimed to assess the interrater agreement and the predictive validity of professionals' judgments made…

Erosion rate study at the Allchar deposit (Macedonia) based on radioactive and stable cosmogenic nuclides (26 Al, 36 Cl, 3 He, and 21 Ne)

PubMed Central

Cvetković, V.; Niedermann, S.; Pejović, V.; Amthauer, G.; Boev, B.; Bosch, F.; Aničin, I.; Henning, W. F.

2016-01-01

Abstract This paper focuses on constraining the erosion rate in the area of the Allchar Sb‐As‐Tl‐Au deposit (Macedonia). It contains the largest known reserves of lorandite (TlAsS2), which is essential for the LORanditeEXperiment (LOREX), aimed at determining the long‐term solar neutrino flux. Because the erosion history of the Allchar area is crucial for the success of LOREX, we applied terrestrial in situ cosmogenic nuclides including both radioactive (26Al and 36Cl) and stable (3He and 21Ne) nuclides in quartz, dolomite/calcite, sanidine, and diopside. The obtained results suggest that there is accordance in the values obtained by applying 26Al, 36Cl, and 21Ne for around 85% of the entire sample collection, with resulting erosion rates varying from several tens of m/Ma to ∼165 m/Ma. The samples from four locations (L‐8 CD, L1b/R, L1c/R, and L‐4/ADR) give erosion rates between 300 and 400 m/Ma. Although these localities reveal remarkably higher values, which may be explained by burial events that occurred in part of Allchar, the erosion rate estimates mostly in the range between 50 and 100 m/Ma. This range further enables us to estimate the vertical erosion rate values for the two main ore bodies Crven Dol and Centralni Deo. We also estimate that the lower and upper limits of average paleo‐depths for the ore body Centralni Deo from 4.3 Ma to the present are 250–290 and 750–790 m, respectively, whereas the upper limit of paleo‐depth for the ore body Crven Dol over the same geological age is 860 m. The estimated paleo‐depth values allow estimating the relative contributions of 205Pb derived from pp‐neutrino and fast cosmic‐ray muons, respectively, which is an important prerequisite for the LOREX experiment. PMID:27587984

The Impact of eHealth on the Quality and Safety of Healthcare

NASA Astrophysics Data System (ADS)

Majeed, Azeem; Black, Ashly; Car, Josip; Anandan, Chantelle; Cresswell, Kathrin; McKinstry, Brian; Pagliari, Claudia; Procter, Rob; Sheikh, Aziz

There is considerable interest in using information technology (IT) to enhance the quality and safety of healthcare. We undertook a systematic literature review to assess the impact of eHealth applications on the quality and safety of healthcare. We retrieved 46,349 potentially relevant publications, from which we selected 67 relevant systematic reviews for inclusion. The literature was found to be poorly collated and of variable quality in its methodology, reporting and utility. We categorised eHealth applications into three main areas: i). storing, managing and transmission of data; ii). supporting clinical decision-making; and iii). facilitating care from a distance. We found that relative to the potential benefits noted within the literature, little empirical evidence exists in support of these applications. Of the few studies revealing the clearest evidence of benefits, many are from academic clinical centres where developers of new applications have also been directly associated with their evaluation. It is therefore unclear how effective these applications would be if deployed outside the environment in which they were developed. Our review of the impact of eHealth applications on quality and safety of healthcare demonstrated a vast gap between the postulated and empirically demonstrated benefits. In addition, there is a lack of robust research on risks and costs. Consequently, the cost-effectiveness of these interventions has yet to be demonstrated.

Subsurface safety valves: safety asset or safety liability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Busch, J.M.; Llewelyn, D.C.G.; Policky, B.J.

1983-10-01

This paper summarizes the methods used to compare the risk of a blowout for a well completed with a subsurface safety valve (SSSV) vs. a completion without an SSSV. These methods, which could be applied to any field, include a combination of SSSV reliability and conventional risk analyses. The Kuparuk River Unit Working Interest Owners recently formed a group to examine the risks associated with installing and maintaining SSSV's in the Kuparuk field. The group was charged with answering the question: ''Assuming Kuparuk field operating conditions, are SSSV's a safety asset, or do numerous operating and maintenance procedures make themmore » a safety liability.'' The results indicate that for the Kuparuk River Unit, an SSSV becomes a safety liability when the mean time between SSSV failures is less than one year. Since current SSSV mean time to failure (MTTF) at Kuparuk is approximately 1000 days, they are considered a safety asset.« less

A tiered approach to incorporate exposure and pharmacokinetics considerations in in vitro based safety assessment

EPA Science Inventory

Application of in vitro based safety assessment requires reconciling chemical concentrations sufficient to produce bioactivity in vitro with those that trigger a molecular initiating event at the relevant in vivo target site. To address such need, computational tools such as phy...

Constraining Landscape History and Glacial Erosivity Using Paired Cosmogenic Nuclides in Upernavik, Northwest Greenland

NASA Technical Reports Server (NTRS)

Corbett, Lee B.; Bierman, Paul R.; Graly, Joseph A.; Neumann, Thomas A.; Rood, Dylan H.

2013-01-01

High-latitude landscape evolution processes have the potential to preserve old, relict surfaces through burial by cold-based, nonerosive glacial ice. To investigate landscape history and age in the high Arctic, we analyzed in situ cosmogenic Be(sup 10) and Al (sup 26) in 33 rocks from Upernavik, northwest Greenland. We sampled adjacent bedrock-boulder pairs along a 100 km transect at elevations up to 1000 m above sea level. Bedrock samples gave significantly older apparent exposure ages than corresponding boulder samples, and minimum limiting ages increased with elevation. Two-isotope calculations Al(sup26)/B(sup 10) on 20 of the 33 samples yielded minimum limiting exposure durations up to 112 k.y., minimum limiting burial durations up to 900 k.y., and minimum limiting total histories up to 990 k.y. The prevalence of BE(sup 10) and Al(sup 26) inherited from previous periods of exposure, especially in bedrock samples at high elevation, indicates that these areas record long and complex surface exposure histories, including significant periods of burial with little subglacial erosion. The long total histories suggest that these high elevation surfaces were largely preserved beneath cold-based, nonerosive ice or snowfields for at least the latter half of the Quaternary. Because of high concentrations of inherited nuclides, only the six youngest boulder samples appear to record the timing of ice retreat. These six samples suggest deglaciation of the Upernavik coast at 11.3 +/- 0.5 ka (average +/- 1 standard deviation). There is no difference in deglaciation age along the 100 km sample transect, indicating that the ice-marginal position retreated rapidly at rates of approx.120 m yr(sup-1).

Relevance and Reason Relations.

PubMed

Skovgaard-Olsen, Niels; Singmann, Henrik; Klauer, Karl Christoph

2017-05-01

This paper examines precursors and consequents of perceived relevance of a proposition A for a proposition C. In Experiment 1, we test Spohn's (2012) assumption that ∆P = P(C|A) - P(C|~A) is a good predictor of ratings of perceived relevance and reason relations, and we examine whether it is a better predictor than the difference measure (P(C|A) - P(C)). In Experiment 2, we examine the effects of relevance on probabilistic coherence in Cruz, Baratgin, Oaksford, and Over's (2015) uncertain "and-to-if" inferences. The results suggest that ∆P predicts perceived relevance and reason relations better than the difference measure and that participants are either less probabilistically coherent in "and-to-if" inferences than initially assumed or that they do not follow P(if A, then C) = P(C|A) ("the Equation"). Results are discussed in light of recent results suggesting that the Equation may not hold under conditions of irrelevance or negative relevance. Copyright © 2016 Cognitive Science Society, Inc.

Teamwork and patient safety in dynamic domains of healthcare: a review of the literature.

PubMed

Manser, T

2009-02-01

This review examines current research on teamwork in highly dynamic domains of healthcare such as operating rooms, intensive care, emergency medicine, or trauma and resuscitation teams with a focus on aspects relevant to the quality and safety of patient care. Evidence from three main areas of research supports the relationship between teamwork and patient safety: (1) Studies investigating the factors contributing to critical incidents and adverse events have shown that teamwork plays an important role in the causation and prevention of adverse events. (2) Research focusing on healthcare providers' perceptions of teamwork demonstrated that (a) staff's perceptions of teamwork and attitudes toward safety-relevant team behavior were related to the quality and safety of patient care and (b) perceptions of teamwork and leadership style are associated with staff well-being, which may impact clinician' ability to provide safe patient care. (3) Observational studies on teamwork behaviors related to high clinical performance have identified patterns of communication, coordination, and leadership that support effective teamwork. In recent years, research using diverse methodological approaches has led to significant progress in team research in healthcare. The challenge for future research is to further develop and validate instruments for team performance assessment and to develop sound theoretical models of team performance in dynamic medical domains integrating evidence from all three areas of team research identified in this review. This will help to improve team training efforts and aid the design of clinical work systems supporting effective teamwork and safe patient care.

Hand Safety

MedlinePlus

... Lawnmower Safety Snowblower safety Pumpkin Carving Gardening Safety Turkey Carving Removing a Ring Fireworks Safety Español Artritis ... Lawnmower Safety Snowblower safety Pumpkin Carving Gardening Safety Turkey Carving Removing a Ring Fireworks Safety Español Artritis ...

Road Safety Education in a Science Course: Evaluation of "Science and the Road."

ERIC Educational Resources Information Center

Gardner, Paul L.

1989-01-01

A traffic safety instructional package--"Science and the Road"--was assessed. It was designed by the Road Traffic Authority of Victoria (Australia) for use in tenth-grade science courses. Evaluation findings resulted in revision of the unit and implementation of more inservice courses for teachers lacking relevant biology and physics…

Microbiological food safety: a dilemma of developing societies.

PubMed

Akhtar, Saeed; Sarker, Mahfuzur R; Hossain, Ashfaque

2014-11-01

Current food safety issues are deleteriously reshaping the life style of the population in the developing world. Socioeconomic status of the population in poorer economies is one of the major determinants to delineate the availability of safe food to the vulnerable population. Assessment of the prevalence of foodborne illness in developing world is the most neglected area to control disease. Botulism, Shigellosis, Campylobacteriosis, Escherichia coli infection, Staphylococcus aureus infection, Salmonellosis, Listeriosis and Cholerae are extensively prevalent and pose a major threat to human health in underdeveloped communities. The existing food safety status of many African, South Asian, Central, and South American developing countries is distressing therefore; it seems much timely to highlight the areas for the improvement to ensure the supply of safe food to the population in these regions. Extensive literature search at PubMed, Science Direct and Medline was carried out during the current year to catch on relevant data from 1976 to date, using selective terms like food safety, South East Asia, Africa, Central and South America, and foodborne illness etc. Efforts were made to restrict the search to low income countries of these regions with reference to specific foodborne pathogens. This report briefly discusses the present food safety situation in these developing countries and associated consequences as prime issues, suggesting foodborne illness to be the most distressing threat for human health and economic growth.

Fifty years of driving safety research.

PubMed

Lee, John D

2008-06-01

This brief review covers the 50 years of driving-related research published in Human Factors, its contribution to driving safety, and emerging challenges. Many factors affect driving safety, making it difficult to assess the impact of specific factors such as driver age, cell phone distractions, or collision warnings. The author considers the research themes associated with the approximately 270 articles on driving published in Human Factors in the past 50 years. To a large extent, current and past research has explored similar themes and concepts. Many articles published in the first 25 years focused on issues such as driver impairment, individual differences, and perceptual limits. Articles published in the past 25 years address similar issues but also point toward vehicle technology that can exacerbate or mitigate the negative effect of these issues. Conceptual and computational models have played an important role in this research. Improved crash-worthiness has contributed to substantial improvements in driving safety over the past 50 years, but future improvements will depend on enhancing driver performance and perhaps, more important, improving driver behavior. Developing models to guide this research will become more challenging as new technology enters the vehicle and shifts the focus from driver performance to driver behavior. Over the past 50 years, Human Factors has accumulated a large base of driving-related research that remains relevant for many of today's design and policy concerns.

Literature Survey of Crude Oil Properties Relevant to Handling and Fire Safety in Transport.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lord, David; Luketa, Anay; Wocken, Chad

2015-03-01

Several fiery rail accidents in 2013-2015 in the U.S. and Canada carrying crude oil produced from the Bakken region of North Dakota have raised questions at many levels on the safety of transporting this, and other types of crude oil, by rail. Sandia National Laboratories was commissioned by the U.S. Department of Energy to investigate the material properties of crude oils, and in particular the so-called "tight oils" like Bakken that comprise the majority of crude oil rail shipments in the U.S. at the current time. The current report is a literature survey of public sources of information on crudemore » oil properties that have some bearing on the likelihood or severity of combustion events that may occur around spills associated with rail transport. The report also contains background information including a review of the notional "tight oil" field operating environment, as well a basic description of crude oils and potential combustion events in rail transport. This page intentionally blank« less

Management capacity to promote nurse workplace health and safety.

PubMed

Fang, Yaxuan; McDonald, Tracey

2018-04-01

To investigate regarding workplace health and safety factors, and to identify strategies to preserve and promote a healthy nursing workplace. Data collected using the Delphi technique with input from 41 key informants across four participant categories drawn from a Chinese university and four hospitals were thematically analysed. Most respondents agreed on the importance of nurses' health and safety, and that nurse managers should act to protect nurses, but not enough on workplace safety. Hospital policies, staff disempowerment, workload and workplace conflicts are major obstacles. The reality of Chinese nurses' workplaces is that health and safety risks abound and relate to socio-cultural expectations of women. Self-management of risks is neccessary, gaps exist in understanding of workplace risks among different nursing groups and their perceptions of the professional status, and the value of nurses' contribution to ongoing risks in the hospital workplace. The Chinese hospital system must make these changes to produce a safer working environment for nurses. This research, based in China, presents an instructive tale for all countries that need support on the types and amounts of management for nurses working at the clinical interface, and on the consequences of management neglect of relevant policies and procedures. © 2017 John Wiley & Sons Ltd.

Nuclear safety

NASA Technical Reports Server (NTRS)

Buden, D.

1991-01-01

Topics dealing with nuclear safety are addressed which include the following: general safety requirements; safety design requirements; terrestrial safety; SP-100 Flight System key safety requirements; potential mission accidents and hazards; key safety features; ground operations; launch operations; flight operations; disposal; safety concerns; licensing; the nuclear engine for rocket vehicle application (NERVA) design philosophy; the NERVA flight safety program; and the NERVA safety plan.

Patient involvement in patient safety: Protocol for developing an intervention using patient reports of organisational safety and patient incident reporting.

PubMed

Ward, Jane K; McEachan, Rosemary R C; Lawton, Rebecca; Armitage, Gerry; Watt, Ian; Wright, John

2011-05-27

panel will provide steering to the research. The PMOS and PIRT aim to provide a reliable means of eliciting patient views about patient safety. Both interventions are likely to have relevance and practical utility for all NHS hospital trusts.

Application of the SCALE TSUNAMI Tools for the Validation of Criticality Safety Calculations Involving 233U

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mueller, Don; Rearden, Bradley T; Hollenbach, Daniel F

2009-02-01

The Radiochemical Development Facility at Oak Ridge National Laboratory has been storing solid materials containing 233U for decades. Preparations are under way to process these materials into a form that is inherently safe from a nuclear criticality safety perspective. This will be accomplished by down-blending the {sup 233}U materials with depleted or natural uranium. At the request of the U.S. Department of Energy, a study has been performed using the SCALE sensitivity and uncertainty analysis tools to demonstrate how these tools could be used to validate nuclear criticality safety calculations of selected process and storage configurations. ISOTEK nuclear criticality safetymore » staff provided four models that are representative of the criticality safety calculations for which validation will be needed. The SCALE TSUNAMI-1D and TSUNAMI-3D sequences were used to generate energy-dependent k{sub eff} sensitivity profiles for each nuclide and reaction present in the four safety analysis models, also referred to as the applications, and in a large set of critical experiments. The SCALE TSUNAMI-IP module was used together with the sensitivity profiles and the cross-section uncertainty data contained in the SCALE covariance data files to propagate the cross-section uncertainties ({Delta}{sigma}/{sigma}) to k{sub eff} uncertainties ({Delta}k/k) for each application model. The SCALE TSUNAMI-IP module was also used to evaluate the similarity of each of the 672 critical experiments with each application. Results of the uncertainty analysis and similarity assessment are presented in this report. A total of 142 experiments were judged to be similar to application 1, and 68 experiments were judged to be similar to application 2. None of the 672 experiments were judged to be adequately similar to applications 3 and 4. Discussion of the uncertainty analysis and similarity assessment is provided for each of the four applications. Example upper subcritical limits (USLs) were

The culture of patient safety in an Iranian intensive care unit.

PubMed

Abdi, Zhaleh; Delgoshaei, Bahram; Ravaghi, Hamid; Abbasi, Mohsen; Heyrani, Ali

2015-04-01

To explore nurses' and physicians' attitudes and perceptions relevant to safety culture and to elicit strategies to promote safety culture in an intensive care unit. A strong safety culture is essential to ensure patient safety in the intensive care unit. This case study adopted a mixed method design. The Safety Attitude Questionnaire (SAQ-ICU version), assessing the safety climate through six domains, was completed by nurses and physicians (n = 42) in an academic intensive care unit. Twenty semi-structured interviews and document analyses were conducted as well. Interviews were analysed using a framework analysis method. Mean scores across the six domains ranged from 52.3 to 72.4 on a 100-point scale. Further analysis indicated that there were statistically significant differences between physicians' and nurses' attitudes toward teamwork (mean scores: 64.5/100 vs. 52.6/100, d = 1.15, t = 3.69, P < 0.001) and job satisfaction (mean scores: 78.2/100 vs. 57.7/100, d = 1.5, t = 4.8, P < 0.001). Interviews revealed several safety challenges including underreporting, failure to learn from errors, lack of speaking up, low job satisfaction among nurses and ineffective nurse-physician communication. The results indicate that all the domains need improvements. However, further attention should be devoted to error reporting and analysis, communication and teamwork among professional groups, and nurses' job satisfaction. Nurse managers can contribute to promoting a safety culture by encouraging staff to report errors, fostering learning from errors and addressing inter-professional communication problems. © 2013 John Wiley & Sons Ltd.

Hotspots identification and ranking for road safety improvement: an alternative approach.

PubMed

Coll, Bronagh; Moutari, Salissou; Marshall, Adele H

2013-10-01

During the last decade, the concept of composite performance index, brought from economic and business statistics, has become a popular practice in the field of road safety, namely for the identification and classification of worst performing areas or time slots also known as hotspots. The overall quality of a composite index depends upon the complexity of phenomena of interest as well as the relevance of the methodological approach used to aggregate the various indicators into a single composite index. However, current aggregation methods used to estimate the composite road safety performance index suffer from various deficiencies at both the theoretical and operational level; these include the correlation and compensability between indicators, the weighting of the indicators as well as their high "degree of freedom" which enables one to readily manipulate them to produce desired outcomes (Munda and Nardo, 2003, 2005, 2009). The objective of this study is to contribute to the ongoing research effort on the estimation of road safety composite index for hotspots' identification and ranking. The aggregation method for constructing the composite road safety performance index introduced in this paper, strives to minimize the aforementioned deficiencies of the current approaches. Furthermore, this new method can be viewed as an intelligent decision support system for road safety performance evaluation, in order to prioritize interventions for road safety improvement. Copyright © 2013 Elsevier Ltd. All rights reserved.

Scoping Review of Research on the Effectiveness of Food-Safety Education Interventions Directed at Consumers.

PubMed

Sivaramalingam, Bhairavi; Young, Ian; Pham, Mai T; Waddell, Lisa; Greig, Judy; Mascarenhas, Mariola; Papadopoulos, Andrew

2015-07-01

Improper food handling by consumers at home is a major cause of foodborne illness. Therefore, effective education strategies are essential to change consumers' food safety attitudes and behaviors. The purpose of this scoping review was to identify and characterize primary literature examining the effectiveness of consumer food-safety education interventions. Ten bibliographic databases were searched using a comprehensive search strategy. Citations were identified; two reviewers screened them for relevance and characterized relevant articles. To ensure results would be applicable to end users, stakeholders were engaged to provide input on the review scope, methods, and results. We identified 246 relevant articles, of which 150 were quantitative, 66 qualitative, and 30 mixed-method research studies. Most studies (64.2%) were published in the United States, using an uncontrolled before-and-after study design (31.3%), and investigated the effectiveness of community-based training sessions and workshops (52.0%). Research gaps were found in the number of randomized controlled studies conducted, academic- and school-based courses and curricula investigated, and interventions targeting high-risk populations (e.g., pregnant women, those who are immunocompromised) and using new media channels (e.g., social media). Key opportunities to enhance the utility of future primary research investigating consumer food-safety interventions include the following: using studies based on behavior-change theories and formative research; engaging the target population in the research; using validated instruments to measures outcomes; and reporting intervention characteristics and outcomes completely. Results of this review can be used to prioritize future primary research and decision-making in this area.

Integrating Safety in the Aviation System: Interdepartmental Training for Pilots and Maintenance Technicians

NASA Technical Reports Server (NTRS)

Mattson, Marifran; Petrin, Donald A.; Young, John P.

2001-01-01

The study of human factors has had a decisive impact on the aviation industry. However, the entire aviation system often is not considered in researching, training, and evaluating human factors issues especially with regard to safety. In both conceptual and practical terms, we argue for the proactive management of human error from both an individual and organizational systems perspective. The results of a multidisciplinary research project incorporating survey data from professional pilots and maintenance technicians and an exploratory study integrating students from relevant disciplines are reported. Survey findings suggest that latent safety errors may occur during the maintenance discrepancy reporting process because pilots and maintenance technicians do not effectively interact with one another. The importance of interdepartmental or cross-disciplinary training for decreasing these errors and increasing safety is discussed as a primary implication.

The Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Risoluti, P.

The Joint Convention on the Safety of Spent Fuel Management and the Safety of Radioactive Waste Management (the Joint Convention) is the only legally binding international treaty in the area of radioactive waste management. It was adopted by a Diplomatic Conference in September 1997 and opened for signature on 29 September 1997. The Convention entered into force on 18 June 1998, and to date (September 04) has been signed by 42 States, of which 34 have formally ratified, thus becoming Contracting Parties. The Joint Convention applies to spent fuel and radioactive waste resulting from civilian application. Its principal aim ismore » to achieve and maintain a high degree of safety in their management worldwide. The Convention is an incentive instrument, not designed to ensure fulfillment of obligations through control and sanction, but by a peer pressure. The obligations of the Contracting Parties are mainly based on the international safety standards developed by the IAEA in past decades. The Convention is intended for all countries generating radioactive waste. Therefore it is relevant not only for those using nuclear power, but for any country where application of nuclear energy in medicine, conventional industry and research is currently used. Obligations of Contracting Parties include attending periodic Review Meetings and prepare National Reports for review by the other Contracting Parties. The National Reports should describe how the country is complying with the requirements of the Articles of the Convention. The first such meeting was held at the IAEA headquarters in November 2003. This paper will describe the origin of the Convention, present its content, the expected outcome for the worldwide safety, and the benefits for a country to be part of it.« less

Highway Safety Program Manual: Volume 14: Pedestrian Safety.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 14 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on pedestrian safety. The purpose and objectives of a pedestrian safety program are outlined. Federal authority in the area of pedestrian safety and policies regarding a safety program…

Benchmarking road safety performance: Identifying a meaningful reference (best-in-class).

PubMed

Chen, Faan; Wu, Jiaorong; Chen, Xiaohong; Wang, Jianjun; Wang, Di

2016-01-01

For road safety improvement, comparing and benchmarking performance are widely advocated as the emerging and preferred approaches. However, there is currently no universally agreed upon approach for the process of road safety benchmarking, and performing the practice successfully is by no means easy. This is especially true for the two core activities of which: (1) developing a set of road safety performance indicators (SPIs) and combining them into a composite index; and (2) identifying a meaningful reference (best-in-class), one which has already obtained outstanding road safety practices. To this end, a scientific technique that can combine the multi-dimensional safety performance indicators (SPIs) into an overall index, and subsequently can identify the 'best-in-class' is urgently required. In this paper, the Entropy-embedded RSR (Rank-sum ratio), an innovative, scientific and systematic methodology is investigated with the aim of conducting the above two core tasks in an integrative and concise procedure, more specifically in a 'one-stop' way. Using a combination of results from other methods (e.g. the SUNflower approach) and other measures (e.g. Human Development Index) as a relevant reference, a given set of European countries are robustly ranked and grouped into several classes based on the composite Road Safety Index. Within each class the 'best-in-class' is then identified. By benchmarking road safety performance, the results serve to promote best practice, encourage the adoption of successful road safety strategies and measures and, more importantly, inspire the kind of political leadership needed to create a road transport system that maximizes safety. Copyright © 2015 Elsevier Ltd. All rights reserved.

Instructional Resources Monograph Series: Safety in Wastewater Treatment Systems. Selected Instructional Activities and References.

ERIC Educational Resources Information Center

Coon, Herbert L.

Described are instructional and reference materials that may be useful to managers, supervisors, foremen and others who are interested in the safety education of workers in wastewater systems. Emphasis is upon items relevant to the development and presentation of wastewater treatment training programs. Part I contains descriptions and excerpts…

Future challenges to microbial food safety.

PubMed

Havelaar, Arie H; Brul, Stanley; de Jong, Aarieke; de Jonge, Rob; Zwietering, Marcel H; Ter Kuile, Benno H

2010-05-30

improved outbreak detection and source attribution, sero-epidemiology and disease burden estimation. Current developments in molecular techniques make it possible to rapidly assemble information on the genome of various isolates of microbial species of concern. Such information can be used to develop new tracking and tracing methods, and to investigate the behavior of micro-organisms under environmentally relevant stress conditions. These novel tools and insight need to be applied to objectives for food safety strategies, as well as to models that predict microbial behavior. In addition, the increasing complexity of the global food systems necessitates improved communication between all parties involved: scientists, risk assessors and risk managers, as well as consumers. Copyright 2009 Elsevier B.V. All rights reserved.

Regulation of non-relevant metabolites of plant protection products in drinking and groundwater in the EU: Current status and way forward.

PubMed

Laabs, V; Leake, C; Botham, P; Melching-Kollmuß, S

2015-10-01

Non-relevant metabolites are defined in the EU regulation for plant protection product authorization and a detailed definition of non-relevant metabolites is given in an EU Commission DG Sanco (now DG SANTE - Health and Food Safety) guidance document. However, in water legislation at EU and member state level non-relevant metabolites of pesticides are either not specifically regulated or diverse threshold values are applied. Based on their inherent properties, non-relevant metabolites should be regulated based on substance-specific and toxicity-based limit values in drinking and groundwater like other anthropogenic chemicals. Yet, if a general limit value for non-relevant metabolites in drinking and groundwater is favored, an application of a Threshold of Toxicological Concern (TTC) concept for Cramer class III compounds leads to a threshold value of 4.5 μg L(-1). This general value is exemplarily shown to be protective for non-relevant metabolites, based on individual drinking water limit values derived for a set of 56 non-relevant metabolites. A consistent definition of non-relevant metabolites of plant protection products, as well as their uniform regulation in drinking and groundwater in the EU, is important to achieve legal clarity for all stakeholders and to establish planning security for development of plant protection products for the European market. Copyright © 2015 Elsevier Inc. All rights reserved.

Template protocol for clinical trials investigating vaccines--focus on safety elements.

PubMed

Bonhoeffer, Jan; Imoukhuede, Egeruan B; Aldrovandi, Grace; Bachtiar, Novilia S; Chan, Eng-Soon; Chang, Soju; Chen, Robert T; Fernandopulle, Rohini; Goldenthal, Karen L; Heffelfinger, James D; Hossain, Shah; Jevaji, Indira; Khamesipour, Ali; Kochhar, Sonali; Makhene, Mamodikoe; Malkin, Elissa; Nalin, David; Prevots, Rebecca; Ramasamy, Ranjan; Sellers, Sarah; Vekemans, Johan; Walker, Kenneth B; Wilson, Pam; Wong, Virginia; Zaman, Khalequz; Heininger, Ulrich

2013-11-12

This document is intended as a guide to the protocol development for trials of prophylactic vaccines. The template may serve phases I-IV clinical trials protocol development to include safety relevant information as required by the regulatory authorities and as deemed useful by the investigators. This document may also be helpful for future site strengthening efforts. Copyright © 2013 Elsevier Ltd. All rights reserved.

Construction safety research in the United States: targeting the Hispanic workforce

PubMed Central

Brunette, M

2004-01-01

While it is known that Hispanics have a continuous growing participation in the construction workforce and that their fatal and non-fatal occupational injuries are higher than any other ethnic group, very little construction safety and health research has been conducted in the United States. Research that focuses on safety and health of Hispanic workers employed in the construction industry might prove beneficial in reducing injuries and promoting safe and decent workplaces for all. The purpose of this article was twofold. First, to propose a research agenda where topics such as surveillance, intervention research on high risk occupations, intervention effectiveness evaluation, design and development of effective and appropriate safety training and educational materials, and the socioeconomic impact of injuries and illnesses, are investigated among the Hispanic construction workforce. Second, to present relevant aspects inherent to this particular population that need to be incorporated into the design and development stages of any safety and health research initiative. They include the occupational, social, economic, and cultural background of Hispanic workers; use of a participatory approach, proper selection and use of translation methods; and conducting collaborative research. Certain limitations and challenges related to the availability of resources for conducting safety and health research on Hispanic workers are further discussed. PMID:15314054

Construction safety research in the United States: targeting the Hispanic workforce.

PubMed

Brunette, M J

2004-08-01

While it is known that Hispanics have a continuous growing participation in the construction workforce and that their fatal and non-fatal occupational injuries are higher than any other ethnic group, very little construction safety and health research has been conducted in the United States. Research that focuses on safety and health of Hispanic workers employed in the construction industry might prove beneficial in reducing injuries and promoting safe and decent workplaces for all. The purpose of this article was twofold. First, to propose a research agenda where topics such as surveillance, intervention research on high risk occupations, intervention effectiveness evaluation, design and development of effective and appropriate safety training and educational materials, and the socioeconomic impact of injuries and illnesses, are investigated among the Hispanic construction workforce. Second, to present relevant aspects inherent to this particular population that need to be incorporated into the design and development stages of any safety and health research initiative. They include the occupational, social, economic, and cultural background of Hispanic workers; use of a participatory approach, proper selection and use of translation methods; and conducting collaborative research. Certain limitations and challenges related to the availability of resources for conducting safety and health research on Hispanic workers are further discussed.

Development of a Medication Safety and Quality Survey for Small Rural Hospitals.

PubMed

Winterstein, Almut G; Johns, Thomas E; Campbell, Kyle N; Libby, Joel; Pannell, Bob

2017-12-01

We summarize the development and initial implementation of a survey tool to assess medication safety in small rural hospitals. As part of an ongoing rural hospital medication safety improvement program, we developed a survey tool in all 13 critical access hospitals (CAHs) in Florida. The survey was compiled from existing medication safety assessments and standards, clinical practice guidelines, and published literature. Survey items were selected based on considerations regarding practicality and relevance to the CAH setting.The final survey instrument included 134 items representing 17 medication safety domains. Overall hospital scores ranged from 41% to 95%, with a median of 59%. Most hospitals showed large variation in scores across domains, with 5 hospitals having at least 1 domain with scores less than 10%. Highest scores across all facilities were seen for safety procedures concerning high-alert or look-alike medications and the assembly of emergency carts. The lowest median scores included availability and consistent use of standardized order sets and the effective implementation of medication safety committees. Most hospitals used the survey results to identify and prioritize quality improvement activities. The survey can be used to conduct a short medication safety assessment specific to a limited number of areas and services in CAHs. It showed good ability to discriminate medication safety levels across participating sites and highlighted opportunities for improvement. It may need modification if case mix or services differ in other states or if the status quo of medication safety in CAHs or related standards advance. The described process of survey development might be helpful to support such modifications.

Perceptual load in different regions of the visual scene and its relevance for driving.

PubMed

Marciano, Hadas; Yeshurun, Yaffa

2015-06-01

The aim of this study was to better understand the role played by perceptual load, at both central and peripheral regions of the visual scene, in driving safety. Attention is a crucial factor in driving safety, and previous laboratory studies suggest that perceptual load is an important factor determining the efficiency of attentional selectivity. Yet, the effects of perceptual load on driving were never studied systematically. Using a driving simulator, we orthogonally manipulated the load levels at the road (central load) and its sides (peripheral load), while occasionally introducing critical events at one of these regions. Perceptual load affected driving performance at both regions of the visual scene. Critically, the effect was different for central versus peripheral load: Whereas load levels on the road mainly affected driving speed, load levels on its sides mainly affected the ability to detect critical events initiating from the roadsides. Moreover, higher levels of peripheral load impaired performance but mainly with low levels of central load, replicating findings with simple letter stimuli. Perceptual load has a considerable effect on driving, but the nature of this effect depends on the region of the visual scene at which the load is introduced. Given the observed importance of perceptual load, authors of future studies of driving safety should take it into account. Specifically, these findings suggest that our understanding of factors that may be relevant for driving safety would benefit from studying these factors under different levels of load at different regions of the visual scene. © 2014, Human Factors and Ergonomics Society.

Clinical relevance in anesthesia journals.

PubMed

Lauritsen, Jakob; Møller, Ann M

2006-04-01

The purpose of this review is to present the latest knowledge and research on the definition and distribution of clinically relevant articles in anesthesia journals. It will also discuss the importance of the chosen methodology and outcome of articles. In the last few years, more attention has been paid to evidence-based medicine in anesthesia. Several articles on the subject have focused on the need to base clinical decisions on sound research employing both methodological rigor and clinically relevant outcomes. The number of systematic reviews in anesthesia literature is increasing as well as the focus on diminishing the number of surrogate outcomes. It has been shown that the impact factor is not a valid measure of establishing the level of clinical relevance to a journal. This review presents definitions of clinically relevant anesthesia articles. A clinically relevant article employs both methodological rigor and a clinically relevant outcome. The terms methodological rigor and clinical outcomes are fully discussed in the review as well as problems with journal impact factors.

A Safety and Health Guide for Vocational Educators. Incorporating Requirements of the Occupational Safety and Health Act of 1970, Relevant Pennsylvania Requirements with Particular Emphasis for Those Concerned with Cooperative Education and Work Study Programs. Volume 15. Number 1.

ERIC Educational Resources Information Center

Wahl, Ray

Intended as a guide for vocational educators to incorporate the requirements of the Occupational Safety and Health Act (1970) and the requirements of various Pennsylvania safety and health regulations with their cooperative vocational programs, the first chapter of this document presents the legal implications of these safety and health…

Traumatology of the traffic accident--dead people for the safety in traffic.

PubMed

Mattern, R; Schueler, F; Kallieris, D

2004-09-10

Since 1970, traumatomechanics has been a focal point in research at the Institute for Legal Medicine and Traffic Medicine in Heidelberg. Here, the main topics are the understanding of the interrelation between mechanical strain and the resulting degree of injury; at the forefront of all interest is the determination of the mechanical resilience in humans, their organs and tissues. Important are not only the means, but likewise the individual strain tolerance and the causes for its variability. Their understanding leads to scientifically justifiable expert's reports. In safety research, these data are of major importance for the validation of crash-dummies and for the improvement of safety protection systems. Before this background, national and international institutions have supported numerous projects. With the help of 2 examples, the Thorax-Trauma-Index (TTI) and the synergy between safety belt and airbag, the relevance of these data for international regulatory provisions and the progress in safety practice are illustrated. Some traumatomechanical insights can only be gathered from human corpses. Legal prerequisites and ethical problems of experiments with corpses are discussed.

Asymptotic safety of higher derivative quantum gravity non-minimally coupled with a matter system

NASA Astrophysics Data System (ADS)

Hamada, Yuta; Yamada, Masatoshi

2017-08-01

We study asymptotic safety of models of the higher derivative quantum gravity with and without matter. The beta functions are derived by utilizing the functional renormalization group, and non-trivial fixed points are found. It turns out that all couplings in gravity sector, namely the cosmological constant, the Newton constant, and the R 2 and R μν 2 coupling constants, are relevant in case of higher derivative pure gravity. For the Higgs-Yukawa model non-minimal coupled with higher derivative gravity, we find a stable fixed point at which the scalar-quartic and the Yukawa coupling constants become relevant. The relevant Yukawa coupling is crucial to realize the finite value of the Yukawa coupling constants in the standard model.

Safety management as a foundation for evidence-based aeromedical standards and reporting of medical events.

PubMed

Evans, Anthony D; Watson, Dougal B; Evans, Sally A; Hastings, John; Singh, Jarnail; Thibeault, Claude

2009-06-01

The different interpretations by States (countries) of the aeromedical standards established by the International Civil Aviation Organization has resulted in a variety of approaches to the development of national aeromedical policy, and consequently a relative lack of harmonization. However, in many areas of aviation, safety management systems have been recently introduced and may represent a way forward. A safety management system can be defined as "A systematic approach to managing safety, including the necessary organizational structures, accountabilities, policies, and procedures" (1). There are four main areas where, by applying safety management principles, it may be possible to better use aeromedical data to enhance flight safety. These are: 1) adjustment of the periodicity and content of routine medical examinations to more accurately reflect aeromedical risk; 2) improvement in reporting and analysis of routine medical examination data; 3) improvement in reporting and analysis of in-flight medical events; and 4) support for improved reporting of relevant aeromedical events through the promotion of an appropriate culture by companies and regulatory authorities. This paper explores how the principles of safety management may be applied to aeromedical systems to improve their contribution to safety.

Fear conditioning to subliminal fear relevant and non fear relevant stimuli.

PubMed

Lipp, Ottmar V; Kempnich, Clare; Jee, Sang Hoon; Arnold, Derek H

2014-01-01

A growing body of evidence suggests that conscious visual awareness is not a prerequisite for human fear learning. For instance, humans can learn to be fearful of subliminal fear relevant images--images depicting stimuli thought to have been fear relevant in our evolutionary context, such as snakes, spiders, and angry human faces. Such stimuli could have a privileged status in relation to manipulations used to suppress usually salient images from awareness, possibly due to the existence of a designated sub-cortical 'fear module'. Here we assess this proposition, and find it wanting. We use binocular masking to suppress awareness of images of snakes and wallabies (particularly cute, non-threatening marsupials). We find that subliminal presentations of both classes of image can induce differential fear conditioning. These data show that learning, as indexed by fear conditioning, is neither contingent on conscious visual awareness nor on subliminal conditional stimuli being fear relevant.

Measurement and simulation of the cross sections for nuclide production in {sup nat}W and {sup 181}Ta targets irradiated with 0.04- to 2.6-GeV protons

DOE Office of Scientific and Technical Information (OSTI.GOV)

Titarenko, Yu. E., E-mail: Yury.Titarenko@itep.ru; Batyaev, V. F.; Titarenko, A. Yu.

The cross sections for nuclide production in thin {sup nat}Wand {sup 181}Ta targets irradiated by 0.04-2.6-GeV protons have been measured by direct {gamma} spectrometry using two {gamma} spectrometers with the resolutions of 1.8 and 1.7 keV in the {sup 60}Co 1332-keV {gamma} line. As a result, 1895 yields of radioactive residual product nuclei have been obtained. The {sup 27}Al(p, x){sup 22}Na reaction has been used as a monitor reaction. The experimental data have been compared with the MCNPX (BERTINI, ISABEL), CEM03.02, INCL4.2, INCL4.5, PHITS, and CASCADE07 calculations.

Measurement and simulation of the cross sections for nuclide production in {sup 56}Fe and {sup nat}Cr targets irradiated with 0.04- to 2.6-GeV protons

DOE Office of Scientific and Technical Information (OSTI.GOV)

Titarenko, Yu. E., E-mail: Yury.Titarenko@itep.ru; Batyaev, V. F.; Titarenko, A. Yu.

The cross sections for nuclide production in thin {sup 56}Fe and {sup nat}Cr targets irradiated by 0.04-2.6-GeV protons are measured by direct {gamma} spectrometry using two {gamma} spectrometers with the resolutions of 1.8 and 1.7 keV for the {sup 60}Co 1332-keV {gamma} line. As a result, 649 yields of radioactive residual product nuclei have been obtained. The {sup 27}Al(p, x){sup 22}Na reaction has been used as a monitor reaction. The experimental data are compared with the MCNPX (BERTINI, ISABEL), CEM03.02, INCL4.2, INCL4.5, PHITS, and CASCADE07 calculations.

Safety assessment of nylon as used in cosmetics.

PubMed

Burnett, Christina; Heldreth, Bart; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan

2014-01-01

The Cosmetic Ingredient Review Expert Panel (Panel) reviewed the safety of nylon polymers, which function in cosmetics primarily as bulking and opacifying agents. The Panel reviewed relevant animal and human data related to these large polymers and determined that they are not likely to penetrate the skin. Whatever residual monomers may be present were not present at a sufficient level to cause any reactions in test subjects at the maximum ingredient use concentration. Accordingly, the Panel concluded that these ingredients are safe in the present practices of use and concentration. © The Author(s) 2014.

Relevance: Cornerstone for Constructing Meaning

ERIC Educational Resources Information Center

Cardell, Melanie

2005-01-01

Relevance has been called the "What's In It For Me" (WIIFM) issue. If there is not something in the content that the learner really needs, then they normally do not want to be bothered with it. Relevance is learner driven, but must be teacher provided for optimal learning. Relevance is so important to the making of meaning that Eric Jensen (1996,…

Ward round template: enhancing patient safety on ward rounds.

PubMed

Gilliland, Niall; Catherwood, Natalie; Chen, Shaouyn; Browne, Peter; Wilson, Jacob; Burden, Helena

2018-01-01

Concerns had been raised at clinical governance regarding the safety of our inpatient ward rounds with particular reference to: documentation of clinical observations and National Early Warning Score (NEWS), compliance with Trust guidance for venous thromboembolism (VTE) risk assessment, antibiotic stewardship, palliative care and treatment escalation plans (TEP). This quality improvement project was conceived to ensure these parameters were considered and documented during the ward round, thereby improving patient care and safety. These parameters were based on Trust patient safety guidance and CQUIN targets. The quality improvement technique of plan-do-study-act (PDSA) was used in this project. We retrospectively reviewed ward round entries to record baseline measurements, based on the above described parameters, prior to making any changes. Following this, the change applied was the introduction of a ward round template to include the highlighted important baseline parameters. Monthly PDSA cycles are performed, and baseline measurements are re-examined, then relevant changes were made to the ward round template. Documentation of baseline measurements was poor prior to introduction of the ward round template; this improved significantly following introduction of a standardised ward round template. Following three cycles, documentation of VTE risk assessments increased from 14% to 92%. Antibiotic stewardship documentation went from 0% to 100%. Use of the TEP form went from 29% to 78%. Following introduction of the ward round template, compliance improved significantly in all safety parameters. Important safety measures being discussed on ward rounds will lead to enhanced patient safety and will improve compliance to Trust guidance and comissioning for quality and innovation (CQUIN) targets. Ongoing change implementation will focus on improving compliance with usage of the template on all urology ward rounds.

Review article: practical current issues in perioperative patient safety.

PubMed

Eichhorn, John H

2013-02-01

This brief review provides an overview and, importantly, a context perspective of relevant current practical issues in perioperative patient safety. The dramatic improvement in anesthesia patient safety over the last 30 years was not initiated by electronic monitors but, rather, largely by a set of behaviours known as "safety monitoring" that were then made decidedly more effective by extending the human senses through electronic monitoring, for example, capnography and pulse oximetry. In the highly developed world, this current success is threatened by complacency and production pressure. In some areas of the developing/underdeveloped world, the challenge is implementing the components of anesthesia practice that will bring safety improvements to parallel the overall current success, for instance, applying the World Federation of Societies of Anaesthesiologists (WFSA) "International Standards for A Safe Practice of Anaesthesia". Generally, expanding the current success in safety involves many practical issues. System issues involve research, effective reporting mechanisms and analysis/broadcasting of results, perioperative communication (including "speaking up to power"), and checklists. Monitoring issues involve enforcing existing published monitoring standards and also recognizing the risk of danger to the patient from hypoventilation during procedural sedation and from postoperative intravenous pain medications. Issues of clinical care include medication errors in the operating room, cerebral hypoperfusion (especially in the head-up position), dangers of airway management, postoperative residual weakness from muscle relaxants, operating room fires, and risks specific in obstetric anesthesia. Recognition of the issues outlined here and empowerment of all anesthesia professionals, from the most senior professors and administrators to the newest practitioners, should help maintain, solidify, and expand the improvements in anesthesia and perioperative patient

The successful evolution of a voluntary vessel safety program in the USA.

PubMed

Hughes, Leslie

2006-01-01

The North Pacific Fishing Vessel Owners' Association (NPFVOA) is a non-profit association dedicated to safety education and training for commercial fishermen and other mariners. Funding is provided primarily through member contributions and also through tuition fees and sales of materials. Members are primarily fishing vessel owners and fishing-related companies, from small salmon boats with single operators to large processing ships with crews of 150 or more. The Association also works together with insurance underwriters and brokers, maritime attorneys and fishing industry support businesses. It works closely with the United States Coast Guard, the Occupational Safety and Health Administration (OSHA) of the United States Department of Labor, the National Institute for Occupational Safety and Health (NIOSH), and many state agencies. There are three primary components of the NPFVOA Vessel Safety Program--a comprehensive safety manual, a series of safety and survival at sea videotapes, and a crew training program. The vessel safety manual includes 300 pages of text and illustrations covering subjects ranging from vessel familiarity for deckhands to stability for the owner and skipper. It is based on the experience of those who have fished the Bering Sea and the North Pacific. The manual calls for vessel owners and skippers to adopt safety practices specific to the vessel's characteristics and service, the waters fished, the season fished and the experience of the crew. The safety and survival videotape series is designed to complement hands-on training classes. The crew training program uses hands-on practice to dramatize and enliven the information presented in the manual and on the videotapes. Courses are designed to be portable and conducted in numerous ports and states. The NPFVOA also publishes a quarterly newsletter covering its safety program, other relevant safety information and reports of lessons learned from serious fishing vessel accidents.

Determining timing of Alaska Range exhumation and glaciation through cosmogenic nuclide burial dating.

NASA Astrophysics Data System (ADS)

Sortor, R. N.; Goehring, B. M.; Bemis, S. P.; Ruleman, C.; Nichols, K. A.; Ward, D. J.; Frothingham, M.

2017-12-01

The Alaska Range is a transpressional orogen with modern exhumation initiating 6 Ma. The stratigraphic record of unroofing and uplift of the foreland basin is largely preserved along the northern flank of the Alaska Range in the Pliocene-Pleistocene aged Nenana Gravel, an extensive alluvial fan and braidplain deposit. Chronometric control on the Nenana Gravel is largely lacking, with the limited available age control based on a single Ar-Ar tephra date in an underlying unit and via stratigraphic inferences for the upper portions. Higher-resolution dating of the Nenana Gravel unit is imperative in order to quantify deposition rates and the timing of uplift and deformation of the foreland basin. Furthermore, a glacial unit has been found to lie unconformably on top of the unit at Suntrana Creek and may represent the initiation of glacial advances in the Alaska Range. We present a suite of 26Al/10Be cosmogenic nuclide burial ages collected from the lower, middle, and upper sections of the Nenana Gravel at Suntrana Creek, as well as the overlying glacial unit. Three samples from the lower Nenana Gravel yield an isochron burial age of 4.42+0.67/-0.13 Ma, which represents initiation of Nenana Gravel deposition and may equate to early unroofing of the Alaska Range. Two samples collected from the middle of the Nenana Gravel unit produced an average simple burial age of 2.25+/-0.45 Ma, with a single sample stratigraphically above dating to 0.99 +/-1.60. Two samples from the upper-most portion of the Nenana Gravel yielded an average simple burial age of 1.27+/-0.22 Ma, and one sample from the glacial unit overlying the Nenana Gravel was dated to 0.97+/-0.06 Ma, representing one of the earliest glacial advances in the region. In addition, the age of the glacial unit provides a minimum age for inception of foreland basin uplift and abandonment of the Nenana Gravel in this region.

Work zone safety analysis and modeling: a state-of-the-art review.

PubMed

Yang, Hong; Ozbay, Kaan; Ozturk, Ozgur; Xie, Kun

2015-01-01

Work zone safety is one of the top priorities for transportation agencies. In recent years, a considerable volume of research has sought to determine work zone crash characteristics and causal factors. Unlike other non-work zone-related safety studies (on both crash frequency and severity), there has not yet been a comprehensive review and assessment of methodological approaches for work zone safety. To address this deficit, this article aims to provide a comprehensive review of the existing extensive research efforts focused on work zone crash-related analysis and modeling, in the hopes of providing researchers and practitioners with a complete overview. Relevant literature published in the last 5 decades was retrieved from the National Work Zone Crash Information Clearinghouse and the Transport Research International Documentation database and other public digital libraries and search engines. Both peer-reviewed publications and research reports were obtained. Each study was carefully reviewed, and those that focused on either work zone crash data analysis or work zone safety modeling were identified. The most relevant studies are specifically examined and discussed in the article. The identified studies were carefully synthesized to understand the state of knowledge on work zone safety. Agreement and inconsistency regarding the characteristics of the work zone crashes discussed in the descriptive studies were summarized. Progress and issues about the current practices on work zone crash frequency and severity modeling are also explored and discussed. The challenges facing work zone safety research are then presented. The synthesis of the literature suggests that the presence of a work zone is likely to increase the crash rate. Crashes are not uniformly distributed within work zones and rear-end crashes are the most prevalent type of crashes in work zones. There was no across-the-board agreement among numerous papers reviewed on the relationship between work zone

Priming patient safety: A middle-range theory of safety goal priming via safety culture communication.

PubMed

Groves, Patricia S; Bunch, Jacinda L

2018-05-18

The aim of this paper is discussion of a new middle-range theory of patient safety goal priming via safety culture communication. Bedside nurses are key to safe care, but there is little theory about how organizations can influence nursing behavior through safety culture to improve patient safety outcomes. We theorize patient safety goal priming via safety culture communication may support organizations in this endeavor. According to this theory, hospital safety culture communication activates a previously held patient safety goal and increases the perceived value of actions nurses can take to achieve that goal. Nurses subsequently prioritize and are motivated to perform tasks and risk assessment related to achieving patient safety. These efforts continue until nurses mitigate or ameliorate identified risks and hazards during the patient care encounter. Critically, this process requires nurses to have a previously held safety goal associated with a repertoire of appropriate actions. This theory suggests undergraduate educators should foster an outcomes focus emphasizing the connections between nursing interventions and safety outcomes, hospitals should strategically structure patient safety primes into communicative activities, and organizations should support professional development including new skills and the latest evidence supporting nursing practice for patient safety. © 2018 John Wiley & Sons Ltd.

Highway Safety Program Manual: Volume 3: Motorcycle Safety.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 3 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on aspects of motorcycle safety. The purpose and specific objectives of a State motorcycle safety program are outlined. Federal authority in the highway safety area and general policies…

Mathematical modeling of efficacy and safety for anticancer drugs clinical development.

PubMed

Lavezzi, Silvia Maria; Borella, Elisa; Carrara, Letizia; De Nicolao, Giuseppe; Magni, Paolo; Poggesi, Italo

2018-01-01

Drug attrition in oncology clinical development is higher than in other therapeutic areas. In this context, pharmacometric modeling represents a useful tool to explore drug efficacy in earlier phases of clinical development, anticipating overall survival using quantitative model-based metrics. Furthermore, modeling approaches can be used to characterize earlier the safety and tolerability profile of drug candidates, and, thus, the risk-benefit ratio and the therapeutic index, supporting the design of optimal treatment regimens and accelerating the whole process of clinical drug development. Areas covered: Herein, the most relevant mathematical models used in clinical anticancer drug development during the last decade are described. Less recent models were considered in the review if they represent a standard for the analysis of certain types of efficacy or safety measures. Expert opinion: Several mathematical models have been proposed to predict overall survival from earlier endpoints and validate their surrogacy in demonstrating drug efficacy in place of overall survival. An increasing number of mathematical models have also been developed to describe the safety findings. Modeling has been extensively used in anticancer drug development to individualize dosing strategies based on patient characteristics, and design optimal dosing regimens balancing efficacy and safety.

The behavior of the uranium decay chain nuclides and thorium during the flank eruptions of Kilauea (Hawaii) between 1983 and 1985

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reinitz, I.M.; Turekian, K.K.

1991-12-01

The concentrations of members of the {sup 238}U decay chain and {sup 232}Th have been determined for the lavas that erupted on the East Rift Zone of Kilauea Volcano, Hawaii (Puu Oo) between January 1983 and January 1985. There was a decrease during the first 180 days in the abundances of all nuclides, following the behavior of the incompatible elements. ({sup 230}Th/{sup 238}U) varies with ({sup 232}Th/{sup 238}U) yielding a batch process age for the source magma of 127,800 {plus minus} 28,500 (2{omega}) y, similar to East Pacific Rise basalts. No ({sup 226}Ra/{sup 230}Th) disequilibrium was evident at Puu Oomore » although Haleakala and Loihi show significant excesses of ({sup 226}Ra) over ({sup 230}Th). The initial ({sup 210}Pb) excess relative to ({sup 226}Ra) implies strong incompatibility of {sup 210}Pb probably with the help of chloride complexing, and the deficiency in later episodes indicates volatilization from the melt mediated by the formation of volatile chloride compounds.« less

[Do residents and nurses communicate safety relevant concerns? : simulation study on the influence of the authority gradient].

PubMed

St Pierre, M; Scholler, A; Strembski, D; Breuer, G

2012-10-01

Due to the negative impact on decision-making too steep authority gradients in teams represent a risk factor for patient safety. As residents and nursing staff may fear sanctions they may be reluctant to forward critical information to or challenge planned actions of attending physicians. In the setting of a simulation course it was investigated whether and to what extent team members would challenge decisions of familiar attending physicians. In each case where participants did not voice an opinion the underlying motives for the behavior were investigated. A total of 59 physicians and 18 nursing staff participated in the scenario. During a rapid sequence induction they were confronted with 7 critical situations created by the attending physician who had been instructed by the simulation team. Recommendations of the German Society of Anaesthesiology were ignored as well as clinical standard operating procedures (SOPs) and two potentially fatal drug administrations were ordered. An attempt was made to determine whether team members were aware of the safety threat at all and if so how they would solve the resulting conflicts. The level of verbal challenge was scored. During debriefing participants were asked to verbalize the motives which they thought might account for their silence or level of challenge. In situations where non-verbal conflict resolution was possible 65% of the participants pursued that strategy whereas 35% voiced an opinion. Situations necessitating verbal intervention were identified in 66% but 72% of the participants chose to remain silent. Team members decided to challenge the attending physician in only 28% of the situations. In 35% their statement was oblique, in 25% the problem was addressed but not further pursued and only in 40% did participants show crisp advocacy and assertiveness and initiated discussion. Asked why they had refrained from challenging the attending physician 37% had no answer, in 35% of situations participants observed a

Intentions and knowledge shaping local safety policy: A comparison of two Swedish cities.

PubMed

Hanberger, Anders; Lundström, Ulf; Mårald, Gunilla

2015-12-01

This article explores how intentions and knowledge shape two Swedish cities' local safety policy (LSP). The applied framework is derived from the integration of governance and implementation research and the theory of knowledge and its use. The study shows that LSPs are shaped by a mix of intentions and different kinds of knowledge, and intentions and knowledge interplay and intertwine in many ways. Key-persons construct LSPs when they work out solutions to urgent safety problems and take departure in the local context, its pre-conditions, and their experience-based and professional knowledge. The state governs LSP softly through management by objectives in the background, but more often key-actor intentions and commitments, local safety problems, and events initiated and influenced LSPs. The article contributes to a better understanding of conditions for LSPs in multi-level governance. The article can be used to improve governance, identify implementation problems and knowledge needs that will improve LSPs and the overall safety situation in the community. The study has implications for how LSPs should be evaluated; many different evaluation criteria can be appropriate, such as relevance, legitimacy, achievement of key actors' objectives, sustainability of policy solutions, and creation of a local safety culture. Copyright © 2015 Elsevier Ltd and National Safety Council. All rights reserved.

Activating knowledge for patient safety practices: a Canadian academic-policy partnership.

PubMed

Harrison, Margaret B; Nicklin, Wendy; Owen, Marie; Godfrey, Christina; McVeety, Janice; Angus, Val

2012-02-01

Over the past decade, the need for healthcare delivery systems to identify and address patient safety issues has been propelled to the forefront. A Canadian survey, for example, demonstrated patient safety to be a major concern of frontline nurses (Nicklin & McVeety 2002). Three crucial patient safety elements, current knowledge, resources, and context of care have been identified by the World Health Organization (WHO 2009). To develop strategies to respond to the scope and mandate of the WHO report within the Canadian context, a pan-Canadian academic-policy partnership has been established. This newly formed Pan-Canadian Partnership, the Queen's Joanna Briggs Collaboration for Patient Safety (referred throughout as "QJBC" or "the Partnership"), includes the Queen's University School of Nursing, Accreditation Canada, the Canadian Patient Safety Institute (CPSI), the Canadian Institutes of Health Research, and is supported by an active and committed advisory council representing over 10 national organizations representing all sectors of the health continuum, including patients/families advocacy groups, professional associations, and other bodies. This unique partnership is designed to provide timely, focused support from academia to the front line of patient safety. QJBC has adopted an "integrated knowledge translation" approach to identify and respond to patient safety priorities and to ensure active engagement with stakeholders in producing and using available knowledge. Synthesis of evidence and guideline adaptation methodologies are employed to access quantitative and qualitative evidence relevant to pertinent patient safety questions and subsequently, to respond to issues of feasibility, meaningfulness, appropriateness/acceptability, and effectiveness. This paper describes the conceptual grounding of the Partnership, its proposed methods, and its plan for action. It is hoped that our journey may provide some guidance to others as they develop patient safety

Economic evaluation in patient safety: a literature review of methods.

PubMed

de Rezende, Bruna Alves; Or, Zeynep; Com-Ruelle, Laure; Michel, Philippe

2012-06-01

Patient safety practices, targeting organisational changes for improving patient safety, are implemented worldwide but their costs are rarely evaluated. This paper provides a review of the methods used in economic evaluation of such practices. International medical and economics databases were searched for peer-reviewed publications on economic evaluations of patient safety between 2000 and 2010 in English and French. This was complemented by a manual search of the reference lists of relevant papers. Grey literature was excluded. Studies were described using a standardised template and assessed independently by two researchers according to six quality criteria. 33 articles were reviewed that were representative of different patient safety domains, data types and evaluation methods. 18 estimated the economic burden of adverse events, 3 measured the costs of patient safety practices and 12 provided complete economic evaluations. Healthcare-associated infections were the most common subject of evaluation, followed by medication-related errors and all types of adverse events. Of these, 10 were selected that had adequately fulfilled one or several key quality criteria for illustration. This review shows that full cost-benefit/utility evaluations are rarely completed as they are resource intensive and often require unavailable data; some overcome these difficulties by performing stochastic modelling and by using secondary sources. Low methodological transparency can be a problem for building evidence from available economic evaluations. Investing in the economic design and reporting of studies with more emphasis on defining study perspectives, data collection and methodological choices could be helpful for strengthening our knowledge base on practices for improving patient safety.

Large-Scale Spacecraft Fire Safety Tests

NASA Technical Reports Server (NTRS)

Urban, David; Ruff, Gary A.; Ferkul, Paul V.; Olson, Sandra; Fernandez-Pello, A. Carlos; T'ien, James S.; Torero, Jose L.; Cowlard, Adam J.; Rouvreau, Sebastien; Minster, Olivier;

Radon in the Workplace: the Occupational Safety and Health Administration (OSHA) Ionizing Radiation Standard.

PubMed

Lewis, Robert K

2016-10-01

On 29 December 1970, the Occupational Safety and Health Act of 1970 established the Occupational Safety and Health Administration (OSHA). This article on OSHA, Title 29, Part 1910.1096 Ionizing Radiation standard was written to increase awareness of the employer, the workforce, state and federal governments, and those in the radon industry who perform radon testing and radon mitigation of the existence of these regulations, particularly the radon relevant aspect of the regulations. This review paper was also written to try to explain what can sometimes be complicated regulations. As the author works within the Radon Division of the Pennsylvania Department of Environmental Protection, Bureau of Radiation Protection, the exclusive focus of the article is on radon. The 1910.1096 standard obviously covers many other aspects of radiation and radiation safety in the work place.

Scenario Analysis for the Safety Assessment of Nuclear Waste Repositories: A Critical Review.

PubMed

Tosoni, Edoardo; Salo, Ahti; Zio, Enrico

2018-04-01

A major challenge in scenario analysis for the safety assessment of nuclear waste repositories pertains to the comprehensiveness of the set of scenarios selected for assessing the safety of the repository. Motivated by this challenge, we discuss the aspects of scenario analysis relevant to comprehensiveness. Specifically, we note that (1) it is necessary to make it clear why scenarios usually focus on a restricted set of features, events, and processes; (2) there is not yet consensus on the interpretation of comprehensiveness for guiding the generation of scenarios; and (3) there is a need for sound approaches to the treatment of epistemic uncertainties. © 2017 Society for Risk Analysis.

Body mass index, safety hazards, and neighborhood attractiveness.

PubMed

Lovasi, Gina S; Bader, Michael D M; Quinn, James; Neckerman, Kathryn; Weiss, Christopher; Rundle, Andrew

2012-10-01

Neighborhood attractiveness and safety may encourage physical activity and help individuals maintain a healthy weight. However, these neighborhood characteristics may not be equally relevant to health across all settings and population subgroups. To evaluate whether potentially attractive neighborhood features are associated with lower BMI, whether safety hazards are associated with higher BMI, and whether environment-environment interactions are present such that associations for a particular characteristic are stronger in an otherwise supportive environment. Survey data and measured height and weight were collected from a convenience sample of 13,102 adult New York City (NYC) residents in 2000-2002; data analyses were completed 2008-2012. Built-environment measures based on municipal GIS data sources were constructed within 1-km network buffers to assess walkable urban form (density, land-use mix, transit access); attractiveness (sidewalk cafés, landmark buildings, street trees, street cleanliness); and safety (homicide rate, pedestrian-auto collision and fatality rate). Generalized linear models with cluster-robust SEs controlled for individual and area-based sociodemographic characteristics. The presence of sidewalk cafés, density of landmark buildings, and density of street trees were associated with lower BMI, whereas the proportion of streets rated as clean was associated with higher BMI. Interactions were observed for sidewalk cafés with neighborhood poverty, for street-tree density with walkability, and for street cleanliness with safety. Safety hazard indicators were not independently associated with BMI. Potentially attractive community and natural features were associated with lower BMI among adults in NYC, and there was some evidence of effect modification. Copyright © 2012 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

The relevance of "non-relevant metabolites" from plant protection products (PPPs) for drinking water: the German view.

PubMed

Dieter, Hermann H

2010-03-01

"Non-relevant metabolites" are those degradation products of plant protection products (PPPs), which are devoid of the targeted toxicities of the PPP and devoid of genotoxicity. Most often, "non-relevant metabolites" have a high affinity to the aquatic environment, are very mobile within this environment, and, usually, are also persistent. Therefore, from the point of drinking water hygiene, they must be characterized as "relevant for drinking water" like many other hydrophilic/polar environmental contaminants of different origins. "Non-relevant metabolites" may therefore penetrate to water sources used for abstraction of drinking water and may thus ultimately be present in drinking water. The presence of "non-relevant metabolites" and similar trace compounds in the water cycle may endanger drinking water quality on a long-term scale. During oxidative drinking water treatment, "non-relevant metabolites" may also serve as the starting material for toxicologically relevant transformation products similar to processes observed by drinking water disinfection with chlorine. This hypothesis was recently confirmed by the detection of the formation of N-nitroso-dimethylamine from ozone and dimethylsulfamide, a "non-relevant metabolite" of the fungicide tolylfluanide. In order to keep drinking water preferably free of "non-relevant metabolites", the German drinking water advisory board of the Federal Ministry of Health supports limiting their penetration into raw and drinking water to the functionally (agriculturally) unavoidable extent. On this background, the German Federal Environment Agency (UBA) recently has recommended two health related indication values (HRIV) to assess "non-relevant metabolites" from the view of drinking water hygiene. Considering the sometimes incomplete toxicological data base for some "non-relevant metabolites", HRIV also have the role of health related precautionary values. Depending on the completeness and quality of the toxicological

Does Employee Safety Matter for Patients Too? Employee Safety Climate and Patient Safety Culture in Health Care.

PubMed

Mohr, David C; Eaton, Jennifer Lipkowitz; McPhaul, Kathleen M; Hodgson, Michael J

2015-04-22

We examined relationships between employee safety climate and patient safety culture. Because employee safety may be a precondition for the development of patient safety, we hypothesized that employee safety culture would be strongly and positively related to patient safety culture. An employee safety climate survey was administered in 2010 and assessed employees' views and experiences of safety for employees. The patient safety survey administered in 2011 assessed the safety culture for patients. We performed Pearson correlations and multiple regression analysis to examine the relationships between a composite measure of employee safety with subdimensions of patient safety culture. The regression models controlled for size, geographic characteristics, and teaching affiliation. Analyses were conducted at the group level using data from 132 medical centers. Higher employee safety climate composite scores were positively associated with all 9 patient safety culture measures examined. Standardized multivariate regression coefficients ranged from 0.44 to 0.64. Medical facilities where staff have more positive perceptions of health care workplace safety climate tended to have more positive assessments of patient safety culture. This suggests that patient safety culture and employee safety climate could be mutually reinforcing, such that investments and improvements in one domain positively impacts the other. Further research is needed to better understand the nexus between health care employee and patient safety to generalize and act upon findings.

An Update on Safety and Side Effects of Cannabidiol: A Review of Clinical Data and Relevant Animal Studies

PubMed Central

Iffland, Kerstin; Grotenhermen, Franjo

2017-01-01

Abstract Introduction: This literature survey aims to extend the comprehensive survey performed by Bergamaschi et al. in 2011 on cannabidiol (CBD) safety and side effects. Apart from updating the literature, this article focuses on clinical studies and CBD potential interactions with other drugs. Results: In general, the often described favorable safety profile of CBD in humans was confirmed and extended by the reviewed research. The majority of studies were performed for treatment of epilepsy and psychotic disorders. Here, the most commonly reported side effects were tiredness, diarrhea, and changes of appetite/weight. In comparison with other drugs, used for the treatment of these medical conditions, CBD has a better side effect profile. This could improve patients' compliance and adherence to treatment. CBD is often used as adjunct therapy. Therefore, more clinical research is warranted on CBD action on hepatic enzymes, drug transporters, and interactions with other drugs and to see if this mainly leads to positive or negative effects, for example, reducing the needed clobazam doses in epilepsy and therefore clobazam's side effects. Conclusion: This review also illustrates that some important toxicological parameters are yet to be studied, for example, if CBD has an effect on hormones. Additionally, more clinical trials with a greater number of participants and longer chronic CBD administration are still lacking. PMID:28861514

The Limits to Relevance

NASA Astrophysics Data System (ADS)

Averill, M.; Briggle, A.

2006-12-01

Science policy and knowledge production lately have taken a pragmatic turn. Funding agencies increasingly are requiring scientists to explain the relevance of their work to society. This stems in part from mounting critiques of the "linear model" of knowledge production in which scientists operating according to their own interests or disciplinary standards are presumed to automatically produce knowledge that is of relevance outside of their narrow communities. Many contend that funded scientific research should be linked more directly to societal goals, which implies a shift in the kind of research that will be funded. While both authors support the concept of useful science, we question the exact meaning of "relevance" and the wisdom of allowing it to control research agendas. We hope to contribute to the conversation by thinking more critically about the meaning and limits of the term "relevance" and the trade-offs implicit in a narrow utilitarian approach. The paper will consider which interests tend to be privileged by an emphasis on relevance and address issues such as whose goals ought to be pursued and why, and who gets to decide. We will consider how relevance, narrowly construed, may actually limit the ultimate utility of scientific research. The paper also will reflect on the worthiness of research goals themselves and their relationship to a broader view of what it means to be human and to live in society. Just as there is more to being human than the pragmatic demands of daily life, there is more at issue with knowledge production than finding the most efficient ways to satisfy consumer preferences or fix near-term policy problems. We will conclude by calling for a balanced approach to funding research that addresses society's most pressing needs but also supports innovative research with less immediately apparent application.

An Investigation of Health and Safety Measures in a Hydroelectric Power Plant.

PubMed

Acakpovi, Amevi; Dzamikumah, Lucky

2016-12-01

Occupational risk management is known as a catalyst in generating superior returns for all stakeholders on a sustainable basis. A number of companies in Ghana implemented health and safety measures adopted from international companies to ensure the safety of their employees. However, there exist great threats to employees' safety in these companies. The purpose of this paper is to investigate the level of compliance of Occupational Health and Safety management systems and standards set by international and local legislation in power producing companies in Ghana. The methodology is conducted by administering questionnaires and in-depth interviews as measuring instruments. A random sampling technique was applied to 60 respondents; only 50 respondents returned their responses. The questionnaire was developed from a literature review and contained questions and items relevant to the initial research problem. A factor analysis was also carried out to investigate the influence of some variables on safety in general. Results showed that the significant factors that influence the safety of employees at the hydroelectric power plant stations are: lack of training and supervision, non-observance of safe work procedures, lack of management commitment, and lack of periodical check on machine operations. The study pointed out the safety loopholes and therefore helped improve the health and safety measures of employees in the selected company by providing effective recommendations. The implementation of the proposed recommendations in this paper, would lead to the prevention of work-related injuries and illnesses of employees as well as property damage and incidents in hydroelectric power plants. The recommendations may equally be considered as benchmark for the Safety and Health Management System with international standards.

Oligonucleotide-based pharmaceuticals: Non-clinical and clinical safety signals and non-clinical testing strategies.

PubMed

Mustonen, Enni-Kaisa; Palomäki, Tiina; Pasanen, Markku

2017-11-01

Antisense oligonucleotides, short interfering RNAs (siRNAs) and aptamers are oligonucleotide-based pharmaceuticals with a promising role in targeted therapies. Currently, five oligonucleotide-based pharmaceuticals have achieved marketing authorization in Europe or USA and many more are undergoing clinical testing. However, several safety concerns have been raised in non-clinical and clinical studies. Oligonucleotides share properties with both chemical and biological pharmaceuticals and therefore they pose challenges also from the regulatory point of view. We have analyzed the safety data of oligonucleotides and evaluated the applicability of current non-clinical toxicological guidelines for assessing the safety of oligonucleotide-based pharmaceuticals. Oligonucleotide-based pharmaceuticals display a similar toxicological profile, exerting adverse effects on liver and kidney, evoking hematological alterations, as well as causing immunostimulation and prolonging the coagulation time. It is possible to extrapolate some of these effects from non-clinical studies to humans. However, evaluation strategies for genotoxicity testing of "non-natural" oligonucleotides should be revised. Additionally, the selective use of surrogates and prediction of clinical endpoints for non-clinically observed immunostimulation is complicated by its multiple potential manifestations, demanding improvements in the testing strategies. Utilizing more relevant and mechanistic-based approaches and taking better account of species differences, could possibly improve the prediction of relevant immunological/proinflammatory effects in humans. Copyright © 2017 Elsevier Inc. All rights reserved.

TDS exposure project: relevance of the total diet study approach for different groups of substances.

PubMed

Vin, Karine; Papadopoulos, Alexandra; Cubadda, Francesco; Aureli, Federica; Oktay Basegmez, Hatice Imge; D'Amato, Marilena; De Coster, Sam; D'Evoli, Laura; López Esteban, María Teresa; Jurkovic, Martina; Lucarini, Massimo; Ozer, Hayrettin; Fernández San Juan, Pedro Mario; Sioen, Isabelle; Sokolic, Darja; Turrini, Aida; Sirot, Véronique

2014-11-01

A method to validate the relevance of the Total Diet Study (TDS) approach for different types of substances is described. As a first step, a list of >2800 chemicals classified into eight main groups of relevance for food safety (natural components, environmental contaminants, substances intentionally added to foods, residues, naturally occurring contaminants, process contaminants, contaminants from packaging and food contact materials, other substances) has been established. The appropriateness of the TDS approach for the different substance groups has then been considered with regard to the three essential principles of a TDS: representativeness of the whole diet, pooling of foods and food analyzed as consumed. Four criteria were considered for that purpose (i) the substance has to be present in a significant part of the diet or predominantly present in specific food groups, (ii) a robust analytical method has to be available to determine it in potential contributors to the dietary exposure of the population, and (iii) the dilution impact of pooling and (iv) the impact of everyday food preparation methods on the concentration of the substance are assessed. For most of the substances the TDS approach appeared to be relevant and any precautions to be taken are outlined. Copyright © 2014 Elsevier Ltd. All rights reserved.

Software Safety Risk in Legacy Safety-Critical Computer Systems

NASA Technical Reports Server (NTRS)

Hill, Janice L.; Baggs, Rhoda

2007-01-01

Safety Standards contain technical and process-oriented safety requirements. Technical requirements are those such as "must work" and "must not work" functions in the system. Process-Oriented requirements are software engineering and safety management process requirements. Address the system perspective and some cover just software in the system > NASA-STD-8719.13B Software Safety Standard is the current standard of interest. NASA programs/projects will have their own set of safety requirements derived from the standard. Safety Cases: a) Documented demonstration that a system complies with the specified safety requirements. b) Evidence is gathered on the integrity of the system and put forward as an argued case. [Gardener (ed.)] c) Problems occur when trying to meet safety standards, and thus make retrospective safety cases, in legacy safety-critical computer systems.

Relevance, Derogation and Permission

NASA Astrophysics Data System (ADS)

Stolpe, Audun

We show that a recently developed theory of positive permission based on the notion of derogation is hampered by a triviality result that indicates a problem with the underlying full-meet contraction operation. We suggest a solution that presupposes a particular normal form for codes of norms, adapted from the theory of relevance through propositional letter sharing. We then establish a correspondence between contractions on sets of norms in input/output logic (derogations), and AGM-style contractions on sets of formulae, and use it as a bridge to migrate results on propositional relevance from the latter to the former idiom. Changing the concept accordingly we show that positive permission now incorporates a relevance requirement that wards off triviality.

Contextualized Instruction: Teaching Relevant Behaviors in Relevant Contexts.

ERIC Educational Resources Information Center

Reboy, Lisa M.; Semb, George B.

In contextualized instruction, the critical features of a context are considered important for the acquisition and transfer of a skill. Examples of contextualized instruction programs are Functional Context Education (FCE) and Anchored Instruction (AI). FCE involves the teaching of reading and mathematics skills in contexts that are relevant to…

Occupational Safety and Health in Venezuela.

PubMed

Caraballo-Arias, Yohama

2015-01-01

Venezuela has pioneered a preventive-focused and comprehensive movement for Occupational Safety and Health (OSH) in Latin America. However, despite being an oil-rich country, it has some of the lowest salaries for their workers and highest levels of hyperinflation, devaluation, crime, and violence of the world. Review the current status and challenges on relevant aspects of OSH in Venezuela. Review of literature and documents from national governments, UN agencies, NGOs, and the Venezuelan government concerning OSH and related topics since 1986. Reformed in 2005, the Organic Law on Prevention, Conditions and Environment (LOPCYMAT) was a fundamental moment of change for OSH. Factors which have impacted OSH the strongest are (i) the creation of the National Institute of Occupational Safety and Health (INPSASEL) and (ii) the socioeconomic crisis Venezuela is going through. Venezuela's laws are innovative and yet non-compliance is enormous. Almost half of the population works in the informal sector. Following the International Labor Office projections, 5 people die per day in Venezuela due to occupational accidents or diseases, making health and safety at work a luxury rather than a right. The quality of life for the average worker has deteriorated, affecting not only health but the overall well-being of all Venezuelans. The political and socio-economic situation has led to a mass exodus of more than 1.6 million highly qualified and talented professionals. Many statistics concerning OSH are not updated and are unreliable regarding occupational accidents and diseases. There is a substantial difference between what is written to protect individual Venezuelans in the workplace and the reality of workplace conditions. Substantial governmental actions are needed in the immediate future to improve occupational safety and health of Venezuelan workers. Copyright © 2015 The Author. Published by Elsevier Inc. All rights reserved.

Engineering nanomaterials-based biosensors for food safety detection.

PubMed

Lv, Man; Liu, Yang; Geng, Jinhui; Kou, Xiaohong; Xin, Zhihong; Yang, Dayong

2018-05-30

Food safety always remains a grand global challenge to human health, especially in developing countries. To solve food safety pertained problems, numerous strategies have been developed to detect biological and chemical contaminants in food. Among these approaches, nanomaterials-based biosensors provide opportunity to realize rapid, sensitive, efficient and portable detection, overcoming the restrictions and limitations of traditional methods such as complicated sample pretreatment, long detection time, and relying on expensive instruments and well-trained personnel. In this review article, we provide a cross-disciplinary perspective to review the progress of nanomaterials-based biosensors for the detection of food contaminants. The review article is organized by the category of food contaminants including pathogens/toxins, heavy metals, pesticides, veterinary drugs and illegal additives. In each category of food contaminant, the biosensing strategies are summarized including optical, colorimetric, fluorescent, electrochemical, and immune- biosensors; the relevant analytes, nanomaterials and biosensors are analyzed comprehensively. Future perspectives and challenges are also discussed briefly. We envision that our review could bridge the gap between the fields of food science and nanotechnology, providing implications for the scientists or engineers in both areas to collaborate and promote the development of nanomaterials-based biosensors for food safety detection. Copyright © 2018 Elsevier B.V. All rights reserved.

Cultural safety and the challenges of translating critically oriented knowledge in practice.

PubMed

Browne, Annette J; Varcoe, Colleen; Smye, Victoria; Reimer-Kirkham, Sheryl; Lynam, M Judith; Wong, Sabrina

2009-07-01

Cultural safety is a relatively new concept that has emerged in the New Zealand nursing context and is being taken up in various ways in Canadian health care discourses. Our research team has been exploring the relevance of cultural safety in the Canadian context, most recently in relation to a knowledge-translation study conducted with nurses practising in a large tertiary hospital. We were drawn to using cultural safety because we conceptualized it as being compatible with critical theoretical perspectives that foster a focus on power imbalances and inequitable social relationships in health care; the interrelated problems of culturalism and racialization; and a commitment to social justice as central to the social mandate of nursing. Engaging in this knowledge-translation study has provided new perspectives on the complexities, ambiguities and tensions that need to be considered when using the concept of cultural safety to draw attention to racialization, culturalism, and health and health care inequities. The philosophic analysis discussed in this paper represents an epistemological grounding for the concept of cultural safety that links directly to particular moral ends with social justice implications. Although cultural safety is a concept that we have firmly positioned within the paradigm of critical inquiry, ambiguities associated with the notions of 'culture', 'safety', and 'cultural safety' need to be anticipated and addressed if they are to be effectively used to draw attention to critical social justice issues in practice settings. Using cultural safety in practice settings to draw attention to and prompt critical reflection on politicized knowledge, therefore, brings an added layer of complexity. To address these complexities, we propose that what may be required to effectively use cultural safety in the knowledge-translation process is a 'social justice curriculum for practice' that would foster a philosophical stance of critical inquiry at both the

Safety climate and safety behaviors in the construction industry: The importance of co-workers commitment to safety.

PubMed

Schwatka, Natalie V; Rosecrance, John C

2016-06-16

There is growing empirical evidence that as safety climate improves work site safety practice improve. Safety climate is often measured by asking workers about their perceptions of management commitment to safety. However, it is less common to include perceptions of their co-workers commitment to safety. While the involvement of management in safety is essential, working with co-workers who value and prioritize safety may be just as important. To evaluate a concept of safety climate that focuses on top management, supervisors and co-workers commitment to safety, which is relatively new and untested in the United States construction industry. Survey data was collected from a cohort of 300 unionized construction workers in the United States. The significance of direct and indirect (mediation) effects among safety climate and safety behavior factors were evaluated via structural equation modeling. Results indicated that safety climate was associated with safety behaviors on the job. More specifically, perceptions of co-workers commitment to safety was a mediator between both management commitment to safety climate factors and safety behaviors. These results support workplace health and safety interventions that build and sustain safety climate and a commitment to safety amongst work teams.

Development of Increasingly Autonomous Traffic Data Manager Using Pilot Relevancy and Ranking Data

NASA Technical Reports Server (NTRS)

Le Vie, Lisa R.; Houston, Vincent E.

2017-01-01

NASA's Safe Autonomous Systems Operations (SASO) project goal is to define and safely enable all future airspace operations by justifiable and optimal autonomy for advanced air, ground, and connected capabilities. This work showcases how Increasingly Autonomous Systems (IAS) could create operational transformations beneficial to the enhancement of civil aviation safety and efficiency. One such IAS under development is the Traffic Data Manager (TDM). This concept is a prototype 'intelligent party-line' system that would declutter and parse out non-relevant air traffic, displaying only relevant air traffic to the aircrew in a digital data communications (Data Comm) environment. As an initial step, over 22,000 data points were gathered from 31 Airline Transport Pilots to train the machine learning algorithms designed to mimic human experts and expertise. The test collection used an analog of the Navigation Display. Pilots were asked to rate the relevancy of the displayed traffic using an interactive tablet application. Pilots were also asked to rank the order of importance of the information given, to better weight the variables within the algorithm. They were also asked if the information given was enough data, and more importantly the "right" data to best inform the algorithm. The paper will describe the findings and their impact to the further development of the algorithm for TDM and, in general, address the issue of how can we train supervised machine learning algorithms, critical to increasingly autonomous systems, with the knowledge and expertise of expert human pilots.

Comparing two safety culture surveys: safety attitudes questionnaire and hospital survey on patient safety.

PubMed

Etchegaray, Jason M; Thomas, Eric J

2012-06-01

To examine the reliability and predictive validity of two patient safety culture surveys-Safety Attitudes Questionnaire (SAQ) and Hospital Survey on Patient Safety Culture (HSOPS)-when administered to the same participants. Also to determine the ability to convert HSOPS scores to SAQ scores. Employees working in intensive care units in 12 hospitals within a large hospital system in the southern United States were invited to anonymously complete both safety culture surveys electronically. All safety culture dimensions from both surveys (with the exception of HSOPS's Staffing) had adequate levels of reliability. Three of HSOPS's outcomes-frequency of event reporting, overall perceptions of patient safety, and overall patient safety grade-were significantly correlated with SAQ and HSOPS dimensions of culture at the individual level, with correlations ranging from r=0.41 to 0.65 for the SAQ dimensions and from r=0.22 to 0.72 for the HSOPS dimensions. Neither the SAQ dimensions nor the HSOPS dimensions predicted the fourth HSOPS outcome-number of events reported within the last 12 months. Regression analyses indicated that HSOPS safety culture dimensions were the best predictors of frequency of event reporting and overall perceptions of patient safety while SAQ and HSOPS dimensions both predicted patient safety grade. Unit-level analyses were not conducted because indices did not indicate that aggregation was appropriate. Scores were converted between the surveys, although much variance remained unexplained. Given that the SAQ and HSOPS had similar reliability and predictive validity, investigators and quality and safety leaders should consider survey length, content, sensitivity to change and the ability to benchmark when selecting a patient safety culture survey.

The medical student as a patient: attitudes towards involvement in the quality and safety of health care.

PubMed

Davis, Rachel E; Joshi, Devavrata; Patel, Krishan; Briggs, M; Vincent, Charles A

2013-10-01

In recent years, factors that affect patients' willingness and ability to participate in safety-relevant behaviours have been investigated. However, how trained healthcare professionals or medical students would feel participating in safety-relevant behaviours as a patient in hospital remains largely unexplored. To investigate medical students' willingness to participate in behaviours related to the quality and safety of their health care. A cross-sectional exploratory study using a survey that addressed willingness to participate in different behaviours recommended by current patient safety initiatives. Three types of interactional behaviours (asking factual or challenging questions, notifying doctors or nurses of errors/problems) and three non-interactional behaviours (choosing a hospital based on the safety record, bringing medicines and a list of allergies into hospital, and reporting an error to a national reporting system) were assessed. One hundred and seventy-nine medical students from an inner city London teaching hospital participated in the study. Students' willingness to participate was affected (P < 0.05) by the action required by the patient and (for interactional behaviours) whether the patient was engaging in the specific action with a doctor or nurse. Students were least willing to ask 'challenging' questions to doctors and nurses and to report errors to a national reporting system. Doctors' and nurses' encouragement appeared to increase self-reported willingness to participate in behaviours where baseline willingness was low. Similar to research on lay patient populations; medical students do not view involvement in safety-related behaviours equally. Interventions should be tailored at encouraging students to participate in behaviours they are less inclined to take on an active role in. Future research is required to examine students' motivations for participation in this important but heavily under-researched area. © 2012 John Wiley & Sons Ltd.

Explaining the food safety behaviours of food handlers using theories of behaviour change: a systematic review.

PubMed

Young, Ian; Thaivalappil, Abhinand; Greig, Judy; Meldrum, Richard; Waddell, Lisa

2018-06-01

Theories of behaviour change can explain the factors affecting food handlers' use of food safety practices. A systematic review was conducted on this topic to identify which theories have been applied in this area and to determine which theories are the most consistent predictors of food handlers' behaviours. Standard systematic review procedures were followed: comprehensive search strategy; relevance screening of abstracts; article characterization; data extraction; risk-of-bias assessment; and descriptive analysis. Among 19 relevant studies, the most commonly investigated theories were the Theory of Planned Behaviour (n = 9 studies) and Health Belief Model (n = 5). All investigated theories were useful to explain food handlers' behavioural intentions and behaviours related to food safety across different settings, and could serve as useful frameworks for future research and practice. However, there was wide variability in the predictive ability of the theories and their specific constructs, indicating theories should be adapted to the local context of application.

Eye Protection: Safety Glasses. Safety Spotlight

ERIC Educational Resources Information Center

Deck, Anita; Roy, Ken

2017-01-01

When it comes to eye safety, there are some situations in which regular safety glasses will work adequately for the needs of the STEM education classroom or laboratory. However, there are certain instances in which safety goggles must be used for safer protection. Taking the time to analyze hazards and assess the risks prior to any activity in the…

The Effects of Safety Discrimination Training and Frequent Safety Observations on Safety-Related Behavior

ERIC Educational Resources Information Center

Taylor, Matthew A.; Alvero, Alicia M.

2012-01-01

The intent of the present study was to assess the effects of discrimination training only and in combination with frequent safety observations on five participants' safety-related behavior in a simulated office setting. The study used a multiple-baseline design across safety-related behaviors. Across all participants and behavior, safety improved…

Relevance theory: pragmatics and cognition.

PubMed

Wearing, Catherine J

2015-01-01

Relevance Theory is a cognitively oriented theory of pragmatics, i.e., a theory of language use. It builds on the seminal work of H.P. Grice(1) to develop a pragmatic theory which is at once philosophically sensitive and empirically plausible (in both psychological and evolutionary terms). This entry reviews the central commitments and chief contributions of Relevance Theory, including its Gricean commitment to the centrality of intention-reading and inference in communication; the cognitively grounded notion of relevance which provides the mechanism for explaining pragmatic interpretation as an intention-driven, inferential process; and several key applications of the theory (lexical pragmatics, metaphor and irony, procedural meaning). Relevance Theory is an important contribution to our understanding of the pragmatics of communication. © 2014 John Wiley & Sons, Ltd.

Traceability of Software Safety Requirements in Legacy Safety Critical Systems

NASA Technical Reports Server (NTRS)

Hill, Janice L.

2007-01-01

How can traceability of software safety requirements be created for legacy safety critical systems? Requirements in safety standards are imposed most times during contract negotiations. On the other hand, there are instances where safety standards are levied on legacy safety critical systems, some of which may be considered for reuse for new applications. Safety standards often specify that software development documentation include process-oriented and technical safety requirements, and also require that system and software safety analyses are performed supporting technical safety requirements implementation. So what can be done if the requisite documents for establishing and maintaining safety requirements traceability are not available?

A qualified presumption of safety approach for the safety assessment of Grana Padano whey starters.

PubMed

Rossetti, Lia; Carminati, Domenico; Zago, Miriam; Giraffa, Giorgio

2009-03-15

A Qualified Presumption of Safety (QPS) approach was applied to dominant lactic acid bacteria (LAB) associated with Grana Padano cheese whey starters. Thirty-two strains belonging to Lactobacillus helveticus, Lactobacillus delbrueckii subsp. lactis, Streptococcus thermophilus, and Lactobacillus fermentum, and representing the overall genotypic LAB diversity associated with 24 previously collected whey starters [Rossetti, L., Fornasari, M.E., Gatti, M., Lazzi, C., Neviani, E., Giraffa, G., 2008. Grana Padano cheese whey starters: microbial composition and strain distribution. International Journal of Food Microbiology 127, 168-171], were analyzed. All L. helveticus, L. delbrueckii subsp. lactis, and S. thermophilus isolates were susceptible to four (i.e. vancomycin, gentamicin, tetracycline, and erythromycin) of the clinically most relevant antibiotics. One L. fermentum strain displayed phenotypic resistance to tetracycline (Tet(R)), with MIC of 32 microg/ml, and gentamycin (Gm(R)), with MIC of 32 microg/ml. PCR was applied to this strain to test the presence of genes tet(L), tet(M), tet(S), and aac(6')-aph(2')-Ia, which are involved in horizontal transfer of Tet(R) and Gm(R), respectively but no detectable amplification products were observed. According to QPS criteria, we conclude that Grana cheese whey starters do not present particular safety concerns.

A strategic framework for the development and enhancement of safety culture in the artificial tanning sector in Greece.

PubMed

Petri, Aspasia; Karabetsos, Efthymios

2018-06-08

Herein, the strategic framework for the development and enhancement of safety culture in the artificial tanning sector in Greece is presented. This framework has been designed and promoted by the competent national regulatory authority, which is the Greek Atomic Energy Commission (EEAE). The aim is to ensure a common understanding regarding ultraviolet radiation (UVR) and artificial tanning among the artificial tanning professionals, the stakeholders and the general public. The strategic framework is founded on the international organizations' recommendations, the EU requirements and the relevant technical standards. It is comprised of three autonomous but interconnected components: A) A sunbed operators' e-training course and certification process, B) A code of practice addressed individually to the business owners, the sunbeds operators and the sunbeds users, C) Communication strategies aiming to raise awareness regarding UVR and artificial tanning to all the interested parties. The artificial tanning safety culture framework presented here is the policy option that EEAE undertook and it is embedded in the upcoming legislation and regulations for the provision of artificial tanning services in Greece. EEAE considers that the structure of the artificial tanning safety culture strategic framework will serve as the guide for the development and promotion of relevant safety culture strategic frameworks for the provision of aesthetic/wellness services that utilize other non-ionizing radiation sources, which currently don't exist. © 2018 IOP Publishing Ltd.

[In silico, in vitro, in omic experimental models and drug safety evaluation].

PubMed

Claude, Nancy; Goldfain-Blanc, Françoise; Guillouzo, André

2009-01-01

Over the last few decades, toxicology has benefited from scientific, technical, and bioinformatic developments relating to patient safety assessment during clinical and drug marketing studies. Based on this knowledge, new in silico, in vitro, and "omic" experimental models are emerging. Although these models cannot currently replace classic safety evaluations performed on laboratory animals, they allow compounds with unacceptable toxicity to be rejected in the early stages of drug development, thereby reducing the number of laboratory animals needed. In addition, because these models are particularly adapted to mechanistic studies, they can help to improve the relevance of the data obtained, thus enabling better prevention and screening of the adverse effects that may occur in humans. Much progress remains to be done, especially in the field of validation. Nevertheless, current efforts by industrial, academic laboratories, and regulatory agencies should, in coming years, significantly improve preclinical drug safety evaluation thanks to the integration of these new methods into the drug research and development process.

Impact of online education on intern behaviour around joint commission national patient safety goals: a randomised trial.

PubMed

Shaw, Tim J; Pernar, Luise I; Peyre, Sarah E; Helfrick, John F; Vogelgesang, Kaitlin R; Graydon-Baker, Erin; Chretien, Yves; Brown, Elizabeth J; Nicholson, James C; Heit, Jeremy J; Co, John Patrick T; Gandhi, Tejal

2012-10-01

To compare the effectiveness of two types of online learning methodologies for improving the patient-safety behaviours mandated in the Joint Commission National Patient Safety Goals (NPSG). This randomised controlled trial was conducted in 2010 at Massachusetts General Hospital and Brigham and Women's Hospital (BWH) in Boston USA. Incoming interns were randomised to either receive an online Spaced Education (SE) programme consisting of cases and questions that reinforce over time, or a programme consisting of an online slide show followed by a quiz (SQ). The outcome measures included NPSG-knowledge improvement, NPSG-compliant behaviours in a simulation scenario, self-reported confidence in safety and quality, programme acceptability and programme relevance. Both online learning programmes improved knowledge retention. On four out of seven survey items measuring satisfaction and self-reported confidence, the proportion of SE interns responding positively was significantly higher (p<0.05) than the fraction of SQ interns. SE interns demonstrated a mean 4.79 (36.6%) NPSG-compliant behaviours (out of 13 total), while SQ interns completed a mean 4.17 (32.0%) (p=0.09). Among those in surgical fields, SE interns demonstrated a mean 5.67 (43.6%) NPSG-compliant behaviours, while SQ interns completed a mean 2.33 (17.9%) (p=0.015). Focus group data indicates that SE was more contextually relevant than SQ, and significantly more engaging. While both online methodologies improved knowledge surrounding the NPSG, SE was more contextually relevant to trainees and was engaging. SE impacted more significantly on both self-reported confidence and the behaviour of surgical residents in a simulated scenario.

HSE's safety assessment principles for criticality safety.

PubMed

Simister, D N; Finnerty, M D; Warburton, S J; Thomas, E A; Macphail, M R

2008-06-01

The Health and Safety Executive (HSE) published its revised Safety Assessment Principles for Nuclear Facilities (SAPs) in December 2006. The SAPs are primarily intended for use by HSE's inspectors when judging the adequacy of safety cases for nuclear facilities. The revised SAPs relate to all aspects of safety in nuclear facilities including the technical discipline of criticality safety. The purpose of this paper is to set out for the benefit of a wider audience some of the thinking behind the final published words and to provide an insight into the development of UK regulatory guidance. The paper notes that it is HSE's intention that the Safety Assessment Principles should be viewed as a reflection of good practice in the context of interpreting primary legislation such as the requirements under site licence conditions for arrangements for producing an adequate safety case and for producing a suitable and sufficient risk assessment under the Ionising Radiations Regulations 1999 (SI1999/3232 www.opsi.gov.uk/si/si1999/uksi_19993232_en.pdf).

[RELEVANT PRINCIPLES IN THE DIAGNOSIS, TREATMENT, AND PREVENTION OF TOXOPLASMOSIS DURING PREGNANCY].

PubMed

Merzlova, N B; Serova, I A; Yagodina, A Yu

2015-01-01

A retrospective survey of the prevalence of TORCH infections among pregnant women was performed in the perinatal center, M. A. Tverye Military Sanitary Unit Nine (Perm), in June 2010 to December 2013. The survey covered 2060 women: they were all examined for cytomegalovirus, herpes simplex virus, and Toxoplasma. Antibodies to Toxoplasma gondii were detected in 28.68% (591/2060); 98.62% were found to have antibodies to herpes simplex; antibodies to cytomegalovirus were identified in 87.13% (1795/2060). Acute maternal toxoplasmosis was diagnosed by seroconversion or determination of IgM anti-Toxoplasma gondii antibodies, in the presence of a low avidity index and a four-fold increase in antibody titers, by simultaneously studying paired serum samples obtained at a 2-week interval. To confirm fetal infection, amniotic fluid PCR examination should be performed after 18 weeks' gestation. No consensus of opinion as to the principles of treatment for toxoplasmosis in pregnant women makes relevant the long-term results of antibacterial and antiprotozoal treatment cycles varying in duration and intensity. The prevention of acute toxoplasmosis in pregnant women ensures the principle of a mother's personal responsibility for infection safety of a newborn infant, which is informationally provided in health and safety fundamentals course and pregravid preparation schools.

Regulatory forum opinion piece*: supporting the need for international harmonization of safety assessments for food flavoring substances.

PubMed

Konishi, Yoichi; Hayashi, Shim-Mo; Fukushima, Shoji

2014-08-01

The advancement of technology and the growth of international commerce underscore the need for global harmonization of regulatory safety requirements and their assessment pertaining to consumer products such as drugs, medical devices, and food. This need is particularly relevant when safety requirements involve time-intensive and costly animal safety studies. Here we present the current regulatory requirements in Europe, the United States, and Japan for flavoring substances (FSs) used in foods and point out significant differences relevant to the international standardization for safety assessments that in our opinion need to be addressed and overcome. The safety assessments that are carried out for FSs in various countries are influenced by divergent definitions of FS, by the information required and available for regulatory submission, and by different regulatory procedures, including the use of decision tree approaches. The European Food Safety Authority (EFSA), the Expert Panel of the U.S. Flavor and Extract Manufacturers Association (FEMA), and the Joint Food and Agriculture Organization (FAO)/World Health Organization (WHO) Expert Committee on Food Additives (JECFA) are making efforts to improve and harmonize the safety assessment of FSs. The application of in silico methods such as quantitative structure-activity relationships and read-across strategies relying on expert input are useful as a first-step screening of the assessment. Application of the Threshold of Toxicological Concern (TTC) approach permits conclusions that are compatible with the risk assessment approaches currently used by international advisory committees. The Japanese Regulatory Authority, on the other hand, does not yet consider in silico methods but still requires in vivo and in vitro genotoxicity test data as well as repeat-dose 90-day toxicity data in at least one species, to be submitted as the first step in the safety assessment of FSs. With this article, we echo requests that have

Software Safety Risk in Legacy Safety-Critical Computer Systems

NASA Technical Reports Server (NTRS)

Hill, Janice; Baggs, Rhoda

2007-01-01

Safety-critical computer systems must be engineered to meet system and software safety requirements. For legacy safety-critical computer systems, software safety requirements may not have been formally specified during development. When process-oriented software safety requirements are levied on a legacy system after the fact, where software development artifacts don't exist or are incomplete, the question becomes 'how can this be done?' The risks associated with only meeting certain software safety requirements in a legacy safety-critical computer system must be addressed should such systems be selected as candidates for reuse. This paper proposes a method for ascertaining formally, a software safety risk assessment, that provides measurements for software safety for legacy systems which may or may not have a suite of software engineering documentation that is now normally required. It relies upon the NASA Software Safety Standard, risk assessment methods based upon the Taxonomy-Based Questionnaire, and the application of reverse engineering CASE tools to produce original design documents for legacy systems.

The JRC-ITU approach to the safety of advanced nuclear fuel cycles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fanghaenel, T.; Rondinella, V.V.; Somers, J.

2013-07-01

The JRC-ITU safety studies of advanced fuels and cycles adopt two main axes. First the full exploitation of still available and highly relevant knowledge and samples from past fuel preparation and irradiation campaigns (complementing the limited number of ongoing programmes). Secondly, the shift of focus from simple property measurement towards the understanding of basic mechanisms determining property evolution and behaviour of fuel compounds during normal, off-normal and accident conditions. The final objective of the second axis is the determination of predictive tools applicable to systems and conditions different from those from which they were derived. State of the art experimentalmore » facilities, extensive networks of partnerships and collaboration with other organizations worldwide, and a developing programme for training and education are essential in this approach. This strategy has been implemented through various programs and projects. The SUPERFACT programme constitutes the main body of existing knowledge on the behavior in-pile of MOX fuel containing minor actinides. It encompassed all steps of a closed fuel cycle. Another international project investigating the safety of a closed cycle is METAPHIX. In this case a U-Pu19-Zr10 metal alloy containing Np, Am and Cm constitutes the fuel. 9 test pins have been prepared and irradiated. In addition to the PIE (Post Irradiation Examination), pyrometallurgical separation of the irradiated fuel has been performed, to demonstrate all the steps of a multiple recycling closed cycle and characterize their safety relevant aspects. Basic studies like thermodynamic fuel properties, fuel-cladding-coolant interactions have also been carried out at JRC-ITU.« less

Safety Control and Safety Education at Technical Institutes

NASA Astrophysics Data System (ADS)

Iino, Hiroshi

The importance of safety education for students at technical institutes is emphasized on three grounds including safety of all working members and students in their education, research and other activities. The Kanazawa Institute of Technology re-organized the safety organization into a line structure and improved safety minds of all their members and now has a chemical materials control system and a set of compulsory safety education programs for their students, although many problems still remain.

Patient safety in phlebology: The ACP Phlebology Safety Checklist.

PubMed

Collares, Felipe Birchal; Sonde, Mehru; Harper, Kenneth; Armitage, Michael; Neuhardt, Diana L; Fronek, Helane S

2018-05-01

Objectives To assess the current use of safety checklists among the American College of Phlebology (ACP) members and their interest in implementing a checklist supported by the ACP on their clinical practices; and to develop a phlebology safety checklist. Method Online surveys were sent to ACP members, and a phlebology safety checklist was developed by a multispecialty team through the ACP Leadership Academy. Results Forty-seven percent of respondents are using a safety checklist in their practices; 23% think that a phlebology safety checklist would interfere or disrupt workflow; 79% answered that a phlebology safety checklist could improve procedure outcomes or prevent complications; and 85% would be interested in implementing a phlebology safety checklist approved by the ACP. Conclusion A phlebology safety checklist was developed with the intent to increase awareness on patient safety and improve outcome in phlebology practice.

Measurement and simulation of the cross sections for nuclide production in {sup 93}Nb and {sup nat}Ni targets irradiated with 0.04- to 2.6-GeV protons

DOE Office of Scientific and Technical Information (OSTI.GOV)

Titarenko, Yu. E., E-mail: Yury.Titarenko@itep.ru; Batyaev, V. F.; Titarenko, A. Yu.

The cross sections for nuclide production in thin {sup 93}Nb and {sup nat}Ni targets irradiated by 0.04- to 2.6-GeV protons have been measured by direct {gamma} spectrometry using two {gamma} spectrometers with the resolutions of 1.8 and 1.7 keV in the {sup 60}Co 1332-keV {gamma} line. As a result, 1112 yields of radioactive residual nuclei have been obtained. The {sup 27}Al(p, x){sup 22}Na reaction has been used as a monitor reaction. The experimental data have been compared with the MCNPX (BERTINI, ISABEL), CEM03.02, INCL4.2, INCL4.5, PHITS, and CASCADE07 calculations.

78 FR 53790 - Public Forum-Safety Culture: Enhancing Transportation Safety

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-30

... NATIONAL TRANSPORTATION SAFETY BOARD Public Forum--Safety Culture: Enhancing Transportation Safety On Tuesday and Wednesday, September 10-11, 2013, the National Transportation Safety Board (NTSB) will convene a forum titled, ``Safety Culture: Enhancing Transportation Safety.'' The forum will begin at 9:00...

The Core Values that Support Health, Safety, and Well-being at Work

PubMed Central

Zwetsloot, Gerard I.J.M.; Scheppingen, Arjella R. van; Bos, Evelien H.; Dijkman, Anja; Starren, Annick

2013-01-01

Background Health, safety, and well-being (HSW) at work represent important values in themselves. It seems, however, that other values can contribute to HSW. This is to some extent reflected in the scientific literature in the attention paid to values like trust or justice. However, an overview of what values are important for HSW was not available. Our central research question was: what organizational values are supportive of health, safety, and well-being at work? Methods The literature was explored via the snowball approach to identify values and value-laden factors that support HSW. Twenty-nine factors were identified as relevant, including synonyms. In the next step, these were clustered around seven core values. Finally, these core values were structured into three main clusters. Results The first value cluster is characterized by a positive attitude toward people and their “being”; it comprises the core values of interconnectedness, participation, and trust. The second value cluster is relevant for the organizational and individual “doing”, for actions planned or undertaken, and comprises justice and responsibility. The third value cluster is relevant for “becoming” and is characterized by the alignment of personal and organizational development; it comprises the values of growth and resilience. Conclusion The three clusters of core values identified can be regarded as “basic value assumptions” that underlie both organizational culture and prevention culture. The core values identified form a natural and perhaps necessary aspect of a prevention culture, complementary to the focus on rational and informed behavior when dealing with HSW risks. PMID:24422174

Post-licensure rapid immunization safety monitoring program (PRISM) data characterization.

PubMed

Baker, Meghan A; Nguyen, Michael; Cole, David V; Lee, Grace M; Lieu, Tracy A

2013-12-30

The Post-Licensure Rapid Immunization Safety Monitoring (PRISM) program is the immunization safety monitoring component of FDA's Mini-Sentinel project, a program to actively monitor the safety of medical products using electronic health information. FDA sought to assess the surveillance capabilities of this large claims-based distributed database for vaccine safety surveillance by characterizing the underlying data. We characterized data available on vaccine exposures in PRISM, estimated how much additional data was gained by matching with select state and local immunization registries, and compared vaccination coverage estimates based on PRISM data with other available data sources. We generated rates of computerized codes representing potential health outcomes relevant to vaccine safety monitoring. Standardized algorithms including ICD-9 codes, number of codes required, exclusion criteria and location of the encounter were used to obtain the background rates. The majority of the vaccines routinely administered to infants, children, adolescents and adults were well captured by claims data. Immunization registry data in up to seven states comprised between 5% and 9% of data for all vaccine categories with the exception of 10% for hepatitis B and 3% and 4% for rotavirus and zoster respectively. Vaccination coverage estimates based on PRISM's computerized data were similar to but lower than coverage estimates from the National Immunization Survey and Healthcare Effectiveness Data and Information Set. For the 25 health outcomes of interest studied, the rates of potential outcomes based on ICD-9 codes were generally higher than rates described in the literature, which are typically clinically confirmed cases. PRISM program's data on vaccine exposures and health outcomes appear complete enough to support robust safety monitoring. Copyright © 2013 Elsevier Ltd. All rights reserved.

Multi-sectoral action for child safety-a European study exploring implicated sectors.

PubMed

Scholtes, Beatrice; Schröder-Bäck, Peter; Förster, Katharina; MacKay, Morag; Vincenten, Joanne; Brand, Helmut

2017-06-01

Injury to children in Europe, resulting in both death and disability, constitutes a significant burden on individuals, families and society. Inequalities between high and low-income countries are growing. The World Health Organisation Health 2020 strategy calls for inter-sectoral collaboration to address injury in Europe and advocates the whole of government and whole of society approaches to wicked problems. In this study we explore which sectors (e.g. health, transport, education) are relevant for four domains of child safety (intentional injury, water, road and home safety). We used the organigraph methodology, originally developed to demonstrate how organizations work, to describe the governance of child safety interventions. Members of the European Child Safety Alliance, working in the field of child safety in 24 European countries, drew organigraphs of evidence-based interventions. They included the different actors involved and the processes between them. We analyzed the organigraphs by counting the actors presented and categorizing them into sectors using a pre-defined analysis framework. We received 44 organigraphs from participants in 24 countries. Twenty-seven sectors were identified across the four domains. Nine of the 27 identified sectors were classified as 'core sectors' (education, health, home affairs, justice, media, recreation, research, social/welfare services and consumers). This study reveals the multi-sectoral nature of child safety in practice. It provides information for stakeholders working in child safety to help them implement inter-sectoral child safety interventions taking a whole-of-government and whole-of-society approach to health governance. © The Author 2017. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.

Social but safe? Quality and safety of diabetes-related online social networks.

PubMed

Weitzman, Elissa R; Cole, Emily; Kaci, Liljana; Mandl, Kenneth D

2011-05-01

To foster informed decision-making about health social networking (SN) by patients and clinicians, the authors evaluated the quality/safety of SN sites' policies and practices. Multisite structured observation of diabetes-focused SN sites. Measurements 28 indicators of quality and safety covering: (1) alignment of content with diabetes science and clinical practice recommendations; (2) safety practices for auditing content, supporting transparency and moderation; (3) accessibility of privacy policies and the communication and control of privacy risks; and (4) centralized sharing of member data and member control over sharing. Quality was variable across n=10 sites: 50% were aligned with diabetes science/clinical practice recommendations with gaps in medical disclaimer use (30% have) and specification of relevant glycosylated hemoglobin levels (0% have). Safety was mixed with gaps in external review approaches (20% used audits and association links) and internal review approaches (70% use moderation). Internal safety review offers limited protection: misinformation about a diabetes 'cure' was found on four moderated sites. Of nine sites with advertising, transparency was missing on five; ads for unfounded 'cures' were present on three. Technological safety was poor with almost no use of procedures for secure data storage and transmission; only three sites support member controls over personal information. Privacy policies' poor readability impedes risk communication. Only three sites (30%) demonstrated better practice. Limitations English-language diabetes sites only. The quality/safety of diabetes SN is variable. Observed better practice suggests improvement is feasible. Mechanisms for improvement are recommended that engage key stakeholders to balance autonomy, community ownership, conditions for innovation, and consumer protection.

SafetyAnalyst

DOT National Transportation Integrated Search

2009-01-01

This booklet provides an overview of SafetyAnalyst. SafetyAnalyst is a set of software tools under development to help State and local highway agencies advance their programming of site-specific safety improvements. SafetyAnalyst will incorporate sta...

Small plasma focus as neutron pulsed source for nuclides identification

NASA Astrophysics Data System (ADS)

Milanese, M.; Niedbalski, J.; Moroso, R.; Barbaglia, M.; Mayer, R.; Castillo, F.; Guichón, S.

2013-10-01

In this paper, we present preliminary results on the feasibility of employing a low energy (2 kJ, 31 kV) plasma focus device as a portable source of pulsed neutron beams (2.45 MeV) generated by nuclear fusion reactions D-D, for the "in situ" analysis of substances by nuclear activation. This source has the relevant advantage of being pulsed at requirement, transportable, not permanently radioactive, without radioactive waste, cheap, among others. We prove the feasibility of using this source showing several spectra of the characteristic emission line for manganese, gold, lead, and silver.

Small plasma focus as neutron pulsed source for nuclides identification.

PubMed

Milanese, M; Niedbalski, J; Moroso, R; Barbaglia, M; Mayer, R; Castillo, F; Guichón, S

2013-10-01

In this paper, we present preliminary results on the feasibility of employing a low energy (2 kJ, 31 kV) plasma focus device as a portable source of pulsed neutron beams (2.45 MeV) generated by nuclear fusion reactions D-D, for the "in situ" analysis of substances by nuclear activation. This source has the relevant advantage of being pulsed at requirement, transportable, not permanently radioactive, without radioactive waste, cheap, among others. We prove the feasibility of using this source showing several spectra of the characteristic emission line for manganese, gold, lead, and silver.

The association between EMS workplace safety culture and safety outcomes.

PubMed

Weaver, Matthew D; Wang, Henry E; Fairbanks, Rollin J; Patterson, Daniel

2012-01-01

Prior studies have highlighted wide variation in emergency medical services (EMS) workplace safety culture across agencies. To determine the association between EMS workplace safety culture scores and patient or provider safety outcomes. We administered a cross-sectional survey to EMS workers affiliated with a convenience sample of agencies. We recruited these agencies from a national EMS management organization. We used the EMS Safety Attitudes Questionnaire (EMS-SAQ) to measure workplace safety culture and the EMS Safety Inventory (EMS-SI), a tool developed to capture self-reported safety outcomes from EMS workers. The EMS-SAQ provides reliable and valid measures of six domains: safety climate, teamwork climate, perceptions of management, working conditions, stress recognition, and job satisfaction. A panel of medical directors, emergency medical technicians and paramedics, and occupational epidemiologists developed the EMS-SI to measure self-reported injury, medical errors and adverse events, and safety-compromising behaviors. We used hierarchical linear models to evaluate the association between EMS-SAQ scores and EMS-SI safety outcome measures. Sixteen percent of all respondents reported experiencing an injury in the past three months, four of every 10 respondents reported an error or adverse event (AE), and 89% reported safety-compromising behaviors. Respondents reporting injury scored lower on five of the six domains of safety culture. Respondents reporting an error or AE scored lower for four of the six domains, while respondents reporting safety-compromising behavior had lower safety culture scores for five of the six domains. Individual EMS worker perceptions of workplace safety culture are associated with composite measures of patient and provider safety outcomes. This study is preliminary evidence of the association between safety culture and patient or provider safety outcomes.

Transformational and passive leadership as cross-level moderators of the relationships between safety knowledge, safety motivation, and safety participation.

PubMed

Jiang, Lixin; Probst, Tahira M

2016-06-01

While safety knowledge and safety motivation are well-established predictors of safety participation, less is known about the impact of leadership styles on these relationships. The purpose of the current study was to examine whether the positive relationships between safety knowledge and motivation and safety participation are contingent on transformational and passive forms of safety leadership. Using multilevel modeling with a sample of 171 employees nested in 40 workgroups, we found that transformational safety leadership strengthened the safety knowledge-participation relationship, whereas passive leadership weakened the safety motivation-participation relationship. Under low transformational leadership, safety motivation was not related to safety participation; under high passive leadership, safety knowledge was not related to safety participation. These results are discussed in light of organizational efforts to increase safety-related citizenship behaviors. Copyright © 2016 Elsevier Ltd and National Safety Council. All rights reserved.

Mode of action associated with development of hemangiosarcoma in mice given pregabalin and assessment of human relevance.

PubMed

Criswell, Kay A; Cook, Jon C; Wojcinski, Zbigniew; Pegg, David; Herman, James; Wesche, David; Giddings, John; Brady, Joseph T; Anderson, Timothy

2012-07-01

Pregabalin increased the incidence of hemangiosarcomas in carcinogenicity studies of 2-year mice but was not tumorigenic in rats. Serum bicarbonate increased within 24 h of pregabalin administration in mice and rats. Rats compensated appropriately, but mice developed metabolic alkalosis and increased blood pH. Local tissue hypoxia and increased endothelial cell proliferation were also confirmed in mice alone. The combination of hypoxia and sustained increases in endothelial cell proliferation, angiogenic growth factors, dysregulated erythropoiesis, and macrophage activation is proposed as the key event in the mode of action (MOA) for hemangiosarcoma formation. Hemangiosarcomas occur spontaneously in untreated control mice but occur only rarely in humans. The International Programme on Chemical Safety and International Life Sciences Institute developed a Human Relevance Framework (HRF) analysis whereby presence or absence of key events can be used to assess human relevance. The HRF combines the MOA with an assessment of biologic plausibility in humans to assess human relevance. This manuscript compares the proposed MOA with Hill criteria, a component of the HRF, for strength, consistency, specificity, temporality, and dose response, with an assessment of key biomarkers in humans, species differences in response to disease conditions, and spontaneous incidence of hemangiosarcoma to evaluate human relevance. Lack of key biomarker events in the MOA in rats, monkeys, and humans supports a species-specific process and demonstrates that the tumor findings in mice are not relevant to humans at the clinical dose of pregabalin. Based on this collective dataset, clinical use of pregabalin would not pose an increased risk for hemangiosarcoma to humans.

Instructional practices at Farm Safety 4 Just Kids (FS4JK) safety day camps.

PubMed

Mazur, J M; Cole, H P; Reed, D; Claunch, D

2005-05-01

The instructional methods used with 1,347 youth in seven Farm Safety 4 Just Kids (FS4JK) day camp sessions conducted in five states during the summer and fall of 2002 were videotaped. The videotapes, instructor questionnaires, and day camp materials were analyzed using an observation protocol that focused on instructional practices and an interaction analysis of instructor-student talk during the sessions. Results showed that instruction focused on hazard recognition, a high level of participant attention during all the sessions observed, and safety day camp content relevant to rural participants regardless of whether they live or work on a farm. Recommendations for improving instructional practice include better use of print materials, more interactive, participatory activities for students, and reduction of instructor-centered, didactic approaches. Given the high level of students' attention, increased involvement of students in active, participatory approaches might enhance the effectiveness of the instruction by: (1) further engaging students through personalizing hazard recognition, (2) contextualizing reports of injuries, (3) examining the complexities of choosing safe behaviors, and (4) paying more attention to the consequences of injury events. Role-playing, narrative simulations, and other types of interactive and collaborative exercises are instructional approaches that support the inclusion of the pre-event contingencies and post-event consequences that are part of all injury events.

Extensive MIS 3 glaciation in southernmost Patagonia revealed by cosmogenic nuclide dating of outwash sediments

NASA Astrophysics Data System (ADS)

Darvill, Christopher M.; Bentley, Michael J.; Stokes, Chris R.; Hein, Andrew S.; Rodés, Ángel

2015-11-01

The timing and extent of former glacial advances can demonstrate leads and lags during periods of climatic change and their forcing, but this requires robust glacial chronologies. In parts of southernmost Patagonia, dating pre-global Last Glacial Maximum (gLGM) ice limits has proven difficult due to post-deposition processes affecting the build-up of cosmogenic nuclides in moraine boulders. Here we provide ages for the Río Cullen and San Sebastián glacial limits of the former Bahía Inútil-San Sebastián (BI-SSb) ice lobe on Tierra del Fuego (53-54°S), previously hypothesised to represent advances during Marine Isotope Stages (MIS) 12 and 10, respectively. Our approach uses cosmogenic 10Be and 26Al exposure dating, but targets glacial outwash associated with these limits and uses depth-profiles and surface cobble samples, thereby accounting for surface deflation and inheritance. The data reveal that the limits formed more recently than previously thought, giving ages of 45.6 ka (+139.9/-14.3) for the Río Cullen, and 30.1 ka (+45.6/-23.1) for the San Sebastián limits. These dates indicate extensive glaciation in southern Patagonia during MIS 3, prior to the well-constrained, but much less extensive MIS 2 (gLGM) limit. This suggests the pattern of ice advances in the region was different to northern Patagonia, with the terrestrial limits relating to the last glacial cycle, rather than progressively less extensive glaciations over hundreds of thousands of years. However, the dates are consistent with MIS 3 glaciation elsewhere in the southern mid-latitudes, and the combination of cooler summers and warmer winters with increased precipitation, may have caused extensive glaciation prior to the gLGM.

Perceived organizational support for safety and employee safety voice: the mediating role of coworker support for safety.

PubMed

Tucker, Sean; Chmiel, Nik; Turner, Nick; Hershcovis, M Sandy; Stride, Chris B

2008-10-01

In the present study, we modeled 2 sources of safety support (perceived organizational support for safety and perceived coworker support for safety) as predictors of employee safety voice, that is, speaking out in an attempt to change unsafe working conditions. Drawing on social exchange and social impact theories, we hypothesized and tested a mediated model predicting employee safety voice using a cross-sectional survey of urban bus drivers (n = 213) in the United Kingdom. Hierarchical regression analysis showed that perceived coworker support for safety fully mediated the relationship between perceived organizational support for safety and employee safety voice. This study adds to the employee voice literature by evaluating the important role that coworkers can play in encouraging others to speak out about safety issues. Implications for research and practice related to change-oriented safety communication are discussed.

Assessment of softball bat safety performance using mid-compression polyurethane softballs.

PubMed