Safety policy and requirements for payloads using the Space Transportation System (STS)

NASA Technical Reports Server (NTRS)

1982-01-01

The Space Transportation Operations (STO) safety policy is to minimize STO involvement in the payload and its GSE (ground support equipment) design process while maintaining the assurance of a safe operation. Requirements for assuring payload mission success are the responsibility of the payload organization and are beyond the scope of this document. The intent is to provide the overall safety policies and requirements while allowing for negotiation between the payload organization and the STO operator in the method of implementation of payload safety. This revision provides for a relaxation in the monitoring requirements for inhibits, allows the payload organization to pursue design options and reflects, additionally, some new requirements. As of the issue date of this NHB, payloads which have completed the formal safety assessment reviews of their preliminary design on the basis of the May 1979 issue will be reassessed for compliance with the above changes.

Roadmap to an effective quality improvement and patient safety program implementation in a rural hospital setting.

PubMed

Ingabire, Willy; Reine, Petera M; Hedt-Gauthier, Bethany L; Hirschhorn, Lisa R; Kirk, Catherine M; Nahimana, Evrard; Nepomscene Uwiringiyemungu, Jean; Ndayisaba, Aphrodis; Manzi, Anatole

2015-12-01

Implementation lessons: (1) implementation of an effective quality improvement and patient safety program in a rural hospital setting requires collaboration between hospital leadership, Ministry of Health and other stakeholders. (2) Building Quality Improvement (QI) capacity to develop engaged QI teams supported by mentoring can improve quality and patient safety. Copyright © 2015 Elsevier Inc. All rights reserved.

Implementation of safety management systems in Hong Kong construction industry - A safety practitioner's perspective.

PubMed

Yiu, Nicole S N; Sze, N N; Chan, Daniel W M

2018-02-01

In the 1980s, the safety management system (SMS) was introduced in the construction industry to mitigate against workplaces hazards, reduce the risk of injuries, and minimize property damage. Also, the Factories and Industrial Undertakings (Safety Management) Regulation was introduced on 24 November 1999 in Hong Kong to empower the mandatory implementation of a SMS in certain industries including building construction. Therefore, it is essential to evaluate the effectiveness of the SMS in improving construction safety and identify the factors that influence its implementation in Hong Kong. A review of the current state-of-the-practice helped to establish the critical success factors (CSFs), benefits, and difficulties of implementing the SMS in the construction industry, while structured interviews were used to establish the key factors of the SMS implementation. Results of the state-of-the-practice review and structured interviews indicated that visible senior commitment, in terms of manpower and cost allocation, and competency of safety manager as key drivers for the SMS implementation. More so, reduced accident rates and accident costs, improved organization framework, and increased safety audit ratings were identified as core benefits of implementing the SMS. Meanwhile, factors such as insufficient resources, tight working schedule, and high labor turnover rate were the key challenges to the effective SMS implementation in Hong Kong. The findings of the study were consistent and indicative of the future development of safety management practice and the sustainable safety improvement of Hong Kong construction industry in the long run. Copyright © 2018 National Safety Council and Elsevier Ltd. All rights reserved.

14 CFR 1214.608 - Safety requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 5 2011-01-01 2010-01-01 true Safety requirements. 1214.608 Section 1214... Space Shuttle Flights § 1214.608 Safety requirements. The contents of OFK's and PPK's must meet the requirements set forth in NASA Handbook 1700.7, “Safety Policy and Requirements for Payloads Using the Space...

14 CFR 1214.608 - Safety requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Safety requirements. 1214.608 Section 1214... Space Shuttle Flights § 1214.608 Safety requirements. The contents of OFK's and PPK's must meet the requirements set forth in NASA Handbook 1700.7, “Safety Policy and Requirements for Payloads Using the Space...

Evaluation of the implementation of new traceability and food safety requirements in the pig industry in eastern Australia.

PubMed

Hernández-Jover, M; Schembri, N; Toribio, J-A; Holyoake, P K

2009-10-01

To evaluate the implementation and barriers to adoption, among pig producers, of a newly introduced traceability and food safety system in Australia. Implementation of the PigPass national vendor declaration (NVD) linked to an on-farm quality assurance (QA) program was evaluated in May and December 2007 at saleyards and abattoirs in New South Wales, Victoria and Queensland. Four focus group discussions with saleyard producers were held between April and July 2007. Implementation of the PigPass system in terms of accurate completion of the form and QA accreditation was higher at the export abattoir than at the regional saleyard at the first audit (P < 0.01). Implementation increased at the second audit at the abattoirs, but little change with time was observed at saleyards. Approximately half of the producers at saleyards used photocopied PigPass forms, made at least one error (>64%), and many vendors did not appear to be QA-accredited. During focus groups, producers expressed the view that PigPass implementation improved animal and product traceability. They identified the associated costs and a perceived lack of support by information providers as obstacles for adoption. Improvement in the implementation of PigPass among producers marketing pigs at export abattoirs was observed during the 8-month period of the study. There is a need for a more uniform message to producers from government agencies on the importance of the PigPass NVD and QA and extension and education targeted toward producers supplying pigs to saleyards and domestic abattoirs to ensure compliance with the traceability requirements.

10 CFR 830.205 - Technical safety requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... must: (1) Develop technical safety requirements that are derived from the documented safety analysis... 10 Energy 4 2010-01-01 2010-01-01 false Technical safety requirements. 830.205 Section 830.205 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Safety Basis Requirements § 830.205 Technical...

10 CFR 830.205 - Technical safety requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... must: (1) Develop technical safety requirements that are derived from the documented safety analysis... 10 Energy 4 2011-01-01 2011-01-01 false Technical safety requirements. 830.205 Section 830.205 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Safety Basis Requirements § 830.205 Technical...

Analysis of safety reports involving area navigation and required navigation performance procedures.

DOT National Transportation Integrated Search

2010-11-03

In order to achieve potential operational and safety benefits enabled by Area Navigation (RNAV) and Required Navigation Performance (RNP) procedures it is important to monitor emerging issues in their initial implementation. Reports from the Aviation...

10 CFR 76.87 - Technical safety requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Technical safety requirements. 76.87 Section 76.87 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.87 Technical safety requirements. (a) The Corporation shall establish technical safety requirements. In...

10 CFR 76.87 - Technical safety requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 2 2012-01-01 2012-01-01 false Technical safety requirements. 76.87 Section 76.87 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.87 Technical safety requirements. (a) The Corporation shall establish technical safety requirements. In...

10 CFR 76.87 - Technical safety requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 2 2011-01-01 2011-01-01 false Technical safety requirements. 76.87 Section 76.87 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.87 Technical safety requirements. (a) The Corporation shall establish technical safety requirements. In...

10 CFR 76.87 - Technical safety requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 2 2013-01-01 2013-01-01 false Technical safety requirements. 76.87 Section 76.87 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.87 Technical safety requirements. (a) The Corporation shall establish technical safety requirements. In...

10 CFR 76.87 - Technical safety requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 2 2014-01-01 2014-01-01 false Technical safety requirements. 76.87 Section 76.87 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.87 Technical safety requirements. (a) The Corporation shall establish technical safety requirements. In...

Implementing Patient Safety Initiatives in Rural Hospitals

ERIC Educational Resources Information Center

Klingner, Jill; Moscovice, Ira; Tupper, Judith; Coburn, Andrew; Wakefield, Mary

2009-01-01

Implementation of patient safety initiatives can be costly in time and energy. Because of small volumes and limited resources, rural hospitals often are not included in nationally driven patient safety initiatives. This article describes the Tennessee Rural Hospital Patient Safety Demonstration project, whose goal was to strengthen capacity for…

[Determinants in an occupational health and safety program implementation].

PubMed

Chaves, Sonia Cristina Lima; Santana, Vilma Sousa; de Leão, Inez Cristina Martins; de Santana, Jusiene Nogueira; de Almeida Lacerda, Lívia Maria Aragão

2009-03-01

To identify predictors for the degree to which a program that integrates occupational health surveillance with labor safety, and involves occupational health/safety specialists, company management, and employees, is implemented. This ecological study evaluated companies implementing the occupational health and safety program (OHSP) proposed by the state of Bahia's regional department of Serviço Social da Indústria (Social Services for Industry, SESI) during the 2005-2006 cycle. The companies that participated were randomly selected. Data were collected through interviews with key contacts within the companies and from technical reports issued by SESI. Multiple linear regression was used to identify factors related to the company, employee, occupational/safety specialist, and any subdimensions that might promote OHSP implementation. Of the 78 companies selected (3 384 employees), the degree to which OHSP was implemented was "advanced" in 24.4%, "intermediate" in 53.8%, and "initial" in 19.3%. Company-related, employee-related and specialist-related factors were positively associated with OHSP implementation (P < 0.001). The most important factor overall was the program's financial autonomy (beta = 4.40; P < 0.001). Bivariate analysis revealed that the degree of implementation was associated with the employees' level of health/safety knowledge (beta = 1.58; P < 0.05) and training (beta = 0.40; P < 0.001) and with communication between the occupational safety team (beta = 1.89; P < 0.01) and the health team (beta = 0.58; P < 0.05). These findings remained unchanged after adjustment for levels of education among managers and employees, salary/wages, company size, and risk. The time and resources available for employees to dedicate to occupational health and safety, the integration and reinforcement of employee and manager training programs, and improved relationship between occupational health and safety teams may contribute to the success of health and safety

14 CFR 1214.608 - Safety requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Space Shuttle Flights § 1214.608 Safety requirements. The contents of OFK's and PPK's must meet the requirements set forth in NASA Handbook 1700.7, “Safety Policy and Requirements for Payloads Using the Space...

14 CFR 1214.608 - Safety requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Space Shuttle Flights § 1214.608 Safety requirements. The contents of OFK's and PPK's must meet the requirements set forth in NASA Handbook 1700.7, “Safety Policy and Requirements for Payloads Using the Space...

Range Flight Safety Requirements

NASA Technical Reports Server (NTRS)

Loftin, Charles E.; Hudson, Sandra M.

2018-01-01

The purpose of this NASA Technical Standard is to provide the technical requirements for the NPR 8715.5, Range Flight Safety Program, in regards to protection of the public, the NASA workforce, and property as it pertains to risk analysis, Flight Safety Systems (FSS), and range flight operations. This standard is approved for use by NASA Headquarters and NASA Centers, including Component Facilities and Technical and Service Support Centers, and may be cited in contract, program, and other Agency documents as a technical requirement. This standard may also apply to the Jet Propulsion Laboratory or to other contractors, grant recipients, or parties to agreements to the extent specified or referenced in their contracts, grants, or agreements, when these organizations conduct or participate in missions that involve range flight operations as defined by NPR 8715.5.1.2.2 In this standard, all mandatory actions (i.e., requirements) are denoted by statements containing the term “shall.”1.3 TailoringTailoring of this standard for application to a specific program or project shall be formally documented as part of program or project requirements and approved by the responsible Technical Authority in accordance with NPR 8715.3, NASA General Safety Program Requirements.

Organizational factors affecting safety implementation in food companies in Thailand.

PubMed

Chinda, Thanwadee

2014-01-01

Thai food industry employs a massive number of skilled and unskilled workers. This may result in an industry with high incidences and accident rates. To improve safety and reduce the accident figures, this paper investigates factors influencing safety implementation in small, medium, and large food companies in Thailand. Five factors, i.e., management commitment, stakeholders' role, safety information and communication, supportive environment, and risk, are found important in helping to improve safety implementation. The statistical analyses also reveal that small, medium, and large food companies hold similar opinions on the risk factor, but bear different perceptions on the other 4 factors. It is also found that to improve safety implementation, the perceptions of safety goals, communication, feedback, safety resources, and supervision should be aligned in small, medium, and large companies.

Improved processes for meeting the data requirements for implementing the Highway Safety Manual (HSM) and Safety Analyst in Florida : [summary].

DOT National Transportation Integrated Search

2014-03-01

Similar to an ill patient, road safety issues can : also be diagnosed, if the right tools are available. : Statistics on roadway incidents can locate areas : that have a high rate of incidents and require : a solution, such as better signage, lightin...

University building safety index measurement using risk and implementation matrix

NASA Astrophysics Data System (ADS)

Rahman, A.; Arumsari, F.; Maryani, A.

2018-04-01

Many high rise building constructed in several universities in Indonesia. The high-rise building management must provide the safety planning and proper safety equipment in each part of the building. Unfortunately, most of the university in Indonesia have not been applying safety policy yet and less awareness on treating safety facilities. Several fire accidents in university showed that some significant risk should be managed by the building management. This research developed a framework for measuring the high rise building safety index in university The framework is not only assessed the risk magnitude but also designed modular building safety checklist for measuring the safety implementation level. The safety checklist has been developed for 8 types of the university rooms, i.e.: office, classroom, 4 type of laboratories, canteen, and library. University building safety index determined using risk-implementation matrix by measuring the risk magnitude and assessing the safety implementation level. Building Safety Index measurement has been applied in 4 high rise buildings in ITS Campus. The building assessment showed that the rectorate building in secure condition and chemical department building in beware condition. While the library and administration center building was in less secure condition.

Water safety plans: bridges and barriers to implementation in North Carolina.

PubMed

Amjad, Urooj Quezon; Luh, Jeanne; Baum, Rachel; Bartram, Jamie

2016-10-01

First developed by the World Health Organization, and now used in several countries, water safety plans (WSPs) are a multi-step, preventive process for managing drinking water hazards. While the beneficial impacts of WSPs have been documented in diverse countries, how to successfully implement WSPs in the United States remains a challenge. We examine the willingness and ability of water utility leaders to implement WSPs in the US state of North Carolina. Our findings show that water utilities have more of a reactive than preventive organizational culture, that implementation requires prioritization of time and resources, perceived comparative advantage to other hazard management plans, leadership in implementation, and identification of how WSPs can be embedded in existing work practices. Future research could focus on whether WSP implementation provides benefits such as decreases in operational costs, and improved organization of records and communication.

14 CFR § 1214.608 - Safety requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Aboard Space Shuttle Flights § 1214.608 Safety requirements. The contents of OFK's and PPK's must meet the requirements set forth in NASA Handbook 1700.7, “Safety Policy and Requirements for Payloads Using...

Companies' opinions and acceptance of global food safety initiative benchmarks after implementation.

PubMed

Crandall, Phil; Van Loo, Ellen J; O'Bryan, Corliss A; Mauromoustakos, Andy; Yiannas, Frank; Dyenson, Natalie; Berdnik, Irina

2012-09-01

International attention has been focused on minimizing costs that may unnecessarily raise food prices. One important aspect to consider is the redundant and overlapping costs of food safety audits. The Global Food Safety Initiative (GFSI) has devised benchmarked schemes based on existing international food safety standards for use as a unifying standard accepted by many retailers. The present study was conducted to evaluate the impact of the decision made by Walmart Stores (Bentonville, AR) to require their suppliers to become GFSI compliant. An online survey of 174 retail suppliers was conducted to assess food suppliers' opinions of this requirement and the benefits suppliers realized when they transitioned from their previous food safety systems. The most common reason for becoming GFSI compliant was to meet customers' requirements; thus, supplier implementation of the GFSI standards was not entirely voluntary. Other reasons given for compliance were enhancing food safety and remaining competitive. About 54 % of food processing plants using GFSI benchmarked schemes followed the guidelines of Safe Quality Food 2000 and 37 % followed those of the British Retail Consortium. At the supplier level, 58 % followed Safe Quality Food 2000 and 31 % followed the British Retail Consortium. Respondents reported that the certification process took about 10 months. The most common reason for selecting a certain GFSI benchmarked scheme was because it was widely accepted by customers (retailers). Four other common reasons were (i) the standard has a good reputation in the industry, (ii) the standard was recommended by others, (iii) the standard is most often used in the industry, and (iv) the standard was required by one of their customers. Most suppliers agreed that increased safety of their products was required to comply with GFSI benchmarked schemes. They also agreed that the GFSI required a more carefully documented food safety management system, which often required

The actual development of European Aviation Safety Requirements in Aviation Medicine: Prospects of Future EASA Requirements

PubMed Central

Siedenburg, J

2009-01-01

Common Rules for Aviation Safety had been developed under the aegis of the Joint Aviation Authorities in the 1990ies. In 2002 the Basic Regulation 1592/2002 was the founding document of a new entity, the European Aviation Safety Agency. Areas of activity were Certification and Maintenance of aircraft. On 18 March the new Basic Regulation 216/2008, repealing the original Basic Regulation was published and applicable from 08 April on. The included Essential Requirements extended the competencies of EASA inter alia to Pilot Licensing and Flight Operations. The future aeromedical requirements will be included as Annex II in another Implementing Regulation on Personnel Licensing. The detailed provisions will be published as guidance material. The proposals for these provisions have been published on 05 June 2008 as NPA 2008- 17c. After public consultation, processing of comments and final adoption the new proposals may be applicable form the second half of 2009 on. A transition period of four year will apply. Whereas the provisions are based on Joint Awiation Requirement - Flight Crew Licensing (JAR-FCL) 3, a new Light Aircraft Pilot Licence (LAPL) project and the details of the associated medical certification regarding general practitioners will be something new in aviation medicine. This paper consists of 6 sections. The introduction outlines the idea of international aviation safety. The second section describes the development of the Joint Aviation Authorities (JAA), the first step to common rules for aviation safety in Europe. The third section encompasses a major change as next step: the foundation of the European Aviation Safety Agency (EASA) and the development of its rules. In the following section provides an outline of the new medical requirements. Section five emphasizes the new concept of a Leisure Pilot Licence. The last section gives an outlook on ongoing rulemaking activities and the opportunities of the public to participate in them. PMID:19561781

The actual development of European aviation safety requirements in aviation medicine: prospects of future EASA requirements.

PubMed

Siedenburg, J

2009-04-01

Common Rules for Aviation Safety had been developed under the aegis of the Joint Aviation Authorities in the 1990s. In 2002 the Basic Regulation 1592/2002 was the founding document of a new entity, the European Aviation Safety Agency. Areas of activity were Certification and Maintenance of aircraft. On 18 March the new Basic Regulation 216/2008, repealing the original Basic Regulation was published and applicable from 08 April on. The included Essential Requirements extended the competencies of EASA inter alia to Pilot Licensing and Flight Operations. The future aeromedical requirements will be included as Annex II in another Implementing Regulation on Personnel Licensing. The detailed provisions will be published as guidance material. The proposals for these provisions have been published on 05 June 2008 as NPA 2008- 17c. After public consultation, processing of comments and final adoption the new proposals may be applicable form the second half of 2009 on. A transition period of four year will apply. Whereas the provisions are based on Joint Aviation Requirement-Flight Crew Licensing (JAR-FCL) 3, a new Light Aircraft Pilot Licence (LAPL) project and the details of the associated medical certification regarding general practitioners will be something new in aviation medicine. This paper consists of 6 sections. The introduction outlines the idea of international aviation safety. The second section describes the development of the Joint Aviation Authorities (JAA), the first step to common rules for aviation safety in Europe. The third section encompasses a major change as next step: the foundation of the European Aviation Safety Agency (EASA) and the development of its rules. In the following section provides an outline of the new medical requirements. Section five emphasizes the new concept of a Leisure Pilot Licence. The last section gives an outlook on ongoing rulemaking activities and the opportunities of the public to participate in them.

The Development of Project Orion Ground Safety Requirements

NASA Technical Reports Server (NTRS)

Kirkpatrick, Paul; Condzella, Bill; Williams, Jeff

2011-01-01

In spite of a very compressed schedule, Project Orion's AFT safety team was able to pull together a comprehensive set of ground safety requirements using existing requirements and subject matter experts. These requirements will serve as the basis for the design of GSE and ground operations. Using the above lessons as a roadmap, new Projects can produce the same results. A rigorous set of ground safety requirements is required to assure ground support equipment (GSE) and associated flight hardware ground operations are conducted safety

Cultivating quality: implementing standardized reporting and safety checklists.

PubMed

Stevens, James D; Bader, Mary Kay; Luna, Michele A; Johnson, Linda M

2011-05-01

Developing processes to create a culture of safety. It's estimated that as many as 98,000 hospitalized patients lose their lives each year in the United States because of medical errors that could have been prevented. While standardized reporting and safety checklists have been shown to improve communication and patient safety, implementation of these tools in hospitals remains challenging. To implement standardized nurse-to-nurse reporting along with safety checklists at Mission Hospital, a 522-bed facility in Mission Viejo, California, using Lewin's change theory and Knowles's adult learning theory. Nurses were tested to assess their knowledge of the standardized nurse-to-physician reporting method called SBAR (Situation, Background, Assessment, Recommendation), their understanding of the concept of the nurse-to-nurse reporting method called SBAP (Situation, Background, Assessment, Plan), and the use of safety checklists. Then, after viewing a 22-minute educational video, they were retested. A total of 482 nurses completed the pretest and posttest. On the pretest, the nurses' mean score was 15.935 points (SD, 3.529) out of 20. On the posttest, the mean score was 18.94 (SD, 1.53) out of 20. A Wilcoxon matched-pairs signed-rank test was performed; the two-tailed P value was < 0.001. The application of Lewin's change theory and Knowles's adult learning theory was successful in the process of implementing standardized nurse-to-nurse reporting and safety checklists at Mission Hospital.

Implementing Software Safety in the NASA Environment

NASA Technical Reports Server (NTRS)

Wetherholt, Martha S.; Radley, Charles F.

1994-01-01

Until recently, NASA did not consider allowing computers total control of flight systems. Human operators, via hardware, have constituted the ultimate safety control. In an attempt to reduce costs, NASA has come to rely more and more heavily on computers and software to control space missions. (For example. software is now planned to control most of the operational functions of the International Space Station.) Thus the need for systematic software safety programs has become crucial for mission success. Concurrent engineering principles dictate that safety should be designed into software up front, not tested into the software after the fact. 'Cost of Quality' studies have statistics and metrics to prove the value of building quality and safety into the development cycle. Unfortunately, most software engineers are not familiar with designing for safety, and most safety engineers are not software experts. Software written to specifications which have not been safety analyzed is a major source of computer related accidents. Safer software is achieved step by step throughout the system and software life cycle. It is a process that includes requirements definition, hazard analyses, formal software inspections, safety analyses, testing, and maintenance. The greatest emphasis is placed on clearly and completely defining system and software requirements, including safety and reliability requirements. Unfortunately, development and review of requirements are the weakest link in the process. While some of the more academic methods, e.g. mathematical models, may help bring about safer software, this paper proposes the use of currently approved software methodologies, and sound software and assurance practices to show how, to a large degree, safety can be designed into software from the start. NASA's approach today is to first conduct a preliminary system hazard analysis (PHA) during the concept and planning phase of a project. This determines the overall hazard potential of

Implementation of a Surgical Safety Checklist: Impact on Surgical Team Perspectives

PubMed Central

Papaconstantinou, Harry T.; Jo, ChanHee; Reznik, Scott I.; Smythe, W. Roy; Wehbe-Janek, Hania

2013-01-01

Background The World Health Organization (WHO) surgical safety checklist has been shown to decrease mortality and complications and has been adopted worldwide. However, system flaws and human errors persist. Identifying provider perspectives of patient safety initiatives may identify strategies for improvement. The purpose of this study was to determine provider perspectives of surgical safety checklist implementation in an effort to improve initiatives that enhance surgical patients' safety. Methods In September 2010, a WHO-adapted surgical safety checklist was implemented at our institution. Surgical teams were invited to complete a checklist-focused questionnaire 1 month before and 1 year after implementation. Baseline and follow-up results were compared. Results A total of 437 surgical care providers responded to the survey: 45% of providers responded at baseline and 64% of providers responded at follow-up. Of the total respondents, 153 (35%) were nurses, 104 (24%) were anesthesia providers, and 180 (41%) were surgeons. Overall, we found an improvement in the awareness of patient safety and quality of care, with significant improvements in the perception of the value of and participation in the time-out process, in surgical team communication, and in the establishment and clarity of patient care needs. Some discordance was noted between surgeons and other surgical team members, indicating that barriers in communication still exist. Overall, approximately 65% of respondents perceived that the checklist improved patient safety and patient care; however, we found a strong negative perception of operating room efficiency. Conclusion Implementation of a surgical safety checklist improves perceptions of surgical safety. Barriers to implementation exist, but staff feedback may be used to enhance the sustainability and success of patient safety initiatives. PMID:24052757

Implementing AORN recommended practices for medication safety.

PubMed

Hicks, Rodney W; Wanzer, Linda J; Denholm, Bonnie

2012-12-01

Medication errors in the perioperative setting can result in patient morbidity and mortality. The AORN "Recommended practices for medication safety" provide guidance to perioperative nurses in developing, implementing, and evaluating safe medication use practices. These practices include recognizing risk points in the medication use process, collaborating with pharmacy staff members, conducting preoperative assessments and postoperative evaluations (eg, medication reconciliation), and handling hazardous medications and pharmaceutical waste. Strategies for successful implementation of the recommended practices include promoting a basic understanding of the nurse's role in the medication use process and developing a medication management plan as well as policies and procedures that support medication safety and activities to measure compliance with safe practices. Published by Elsevier Inc.

Industrial requirements in food safety.

PubMed

Vincent, P M

1990-01-01

The principles of establishing industrial requirements in food safety are described, taking risk potentials all along the food chain into their respective account. Regulations will, in the future, lead to increased autocontrol in production. The rapid changes in food technology require constant adaptation to new problems, to keep the global quality of food at a high level. Regulatory authorities will, in the new European market, concentrate on enforcement of 'essential requirements' while industrialists will follow good manufacturing practices. Open dialogue between the latter, the former and the scientific community is highly desirable since mutual knowledge of the problem will help maintain a high level of food safety, for the benefit of everybody.

Explosives Safety Requirements Manual

DOT National Transportation Integrated Search

1996-03-29

This Manual describes the Department of Energy's (DOE's) explosives safety requirements applicable to operations involving the development, testing, handling, and processing of explosives or assemblies containing explosives. It is intended to reflect...

Implementation of a patient safety program at a tertiary health system: A longitudinal analysis of interventions and serious safety events.

PubMed

Cropper, Douglas P; Harb, Nidal H; Said, Patricia A; Lemke, Jon H; Shammas, Nicolas W

2018-04-01

We hypothesize that implementation of a safety program based on high reliability organization principles will reduce serious safety events (SSE). The safety program focused on 7 essential elements: (a) safety rounding, (b) safety oversight teams, (c) safety huddles, (d) safety coaches, (e) good catches/safety heroes, (f) safety education, and (g) red rule. An educational curriculum was implemented focusing on changing high-risk behaviors and implementing critical safety policies. All unusual occurrences were captured in the Midas system and investigated by risk specialists, the safety officer, and the chief medical officer. A multidepartmental committee evaluated these events, and a root cause analysis (RCA) was performed. Events were tabulated and serious safety event (SSE) recorded and plotted over time. Safety success stories (SSSs) were also evaluated over time. A steady drop in SSEs was seen over 9 years. Also a rise in SSSs was evident, reflecting on staff engagement in the program. The parallel change in SSEs, SSSs, and the implementation of various safety interventions highly suggest that the program was successful in achieving its goals. A safety program based on high-reliability organization principles and made a core value of the institution can have a significant positive impact on reducing SSEs. © 2018 American Society for Healthcare Risk Management of the American Hospital Association.

49 CFR 238.603 - Safety planning requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... or potential safety hazards over the life cycle of the equipment; (3) Identify safety issues during... issues, reducing hazards, and meeting safety requirements; (6) Develop a program of testing or analysis...

49 CFR 238.603 - Safety planning requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... or potential safety hazards over the life cycle of the equipment; (3) Identify safety issues during... issues, reducing hazards, and meeting safety requirements; (6) Develop a program of testing or analysis...

[Level of implementation of the Program for Safety and Health at Work in Antioquia, Colombia].

PubMed

Vega-Monsalve, Ninfa Del Carmen

2017-07-13

This study describes the level of implementation of the Program for Safety and Health at Work in companies located in the Department of Antioquia, Colombia, and associated factors. A cross-sectional survey included 73 companies with more than 50 workers each and implementation of the program. A total of 65 interviews were held, in addition to 73 checklists and process reviews. The companies showed suboptimal compliance with the management model for workplace safety and health proposed by the International Labor Organization (ILO). The component with the best development was Organization (87%), and the worst was Policy (67%). Company executives contended that the causes of suboptimal implementation were the limited commitment by area directors and scarce budget resources. Risk management mostly aimed to comply with the legal requirements in order to avoid penalties, plus documenting cases. There was little implementation of effective checks and controls to reduce the sources of work accidents. The study concludes that workers' health management lacks effective strategies.

[How patient safety programmes can be successfully implemented - an example from Switzerland].

PubMed

Kobler, Irene; Mascherek, Anna; Bezzola, Paula

2015-01-01

Internationally, the implementation of patient safety programmes poses a major challenge. In the first part, we will demonstrate that various measures have been found to be effective in the literature but that they often do not reach the patient because their implementation proves difficult. Difficulties arise from both the complexity of the interventions themselves and from different organisational settings in individual hospitals. The second part specifically describes the implementation of patient safety improvement programmes in Switzerland and discusses measures intended to bridge the gap between the theory and practice of implementation in Switzerland. Then, the national pilot programme to improve patient safety in surgery is presented, which was launched by the federal Swiss government and has been implemented by the patient safety foundation. Procedures, challenges and highlights in implementing the programme in Switzerland on a national level are outlined. Finally, first (preliminary) results are presented and critically discussed. Copyright © 2015. Published by Elsevier GmbH.

Exploring the sociotechnical intersection of patient safety and electronic health record implementation.

PubMed

Meeks, Derek W; Takian, Amirhossein; Sittig, Dean F; Singh, Hardeep; Barber, Nick

2014-02-01

The intersection of electronic health records (EHR) and patient safety is complex. To examine the applicability of two previously developed conceptual models comprehensively to understand safety implications of EHR implementation in the English National Health Service (NHS). We conducted a secondary analysis of interview data from a 30-month longitudinal, prospective, case study-based evaluation of EHR implementation in 12 NHS hospitals. We used a framework analysis approach to apply conceptual models developed by Sittig and Singh to understand better EHR implementation and use: an eight-dimension sociotechnical model and a three-phase patient safety model (safe technology, safe use of technology, and use of technology to improve safety). The intersection of patient safety and EHR implementation and use was characterized by risks involving technology (hardware and software, clinical content, and human-computer interfaces), the interaction of technology with non-technological factors, and improper or unsafe use of technology. Our data support that patient safety improvement activities as well as patient safety hazards change as an organization evolves from concerns about safe EHR functionality, ensuring safe and appropriate EHR use, to using the EHR itself to provide ongoing surveillance and monitoring of patient safety. We demonstrate the face validity of two models for understanding the sociotechnical aspects of safe EHR implementation and the complex interactions of technology within a healthcare system evolving from paper to integrated EHR. Using sociotechnical models, including those presented in this paper, may be beneficial to help stakeholders understand, synthesize, and anticipate risks at the intersection of patient safety and health information technology.

The Implementation and Maintenance of a Behavioral Safety Process in a Petroleum Refinery

ERIC Educational Resources Information Center

Myers, Wanda V.; McSween, Terry E.; Medina, Rixio E.; Rost, Kristen; Alvero, Alicia M.

2010-01-01

A values-centered and team-based behavioral safety process was implemented in a petroleum oil refinery. Employee teams defined the refinery's safety values and related practices, which were used to guide the process design and implementation. The process included (a) a safety assessment; (b) the clarification of safety-related values and related…

Improving safety culture in hospitals: Facilitators and barriers to implementation of Systemic Falls Investigative Method (SFIM).

PubMed

Zecevic, Aleksandra A; Li, Alvin Ho-Ting; Ngo, Charity; Halligan, Michelle; Kothari, Anita

2017-06-01

The purpose of this study was to assess the facilitators and barriers to implementation of the Systemic Falls Investigative Method (SFIM) on selected hospital units. A cross-sectional explanatory mixed methods design was used to converge results from a standardized safety culture survey with themes that emerged from interviews and focus groups. Findings were organized by six elements of the Ottawa Model of Research Use framework. A geriatric rehabilitation unit of an acute care hospital and a neurological unit of a rehabilitation hospital were selected purposefully due to the high frequency of falls. Hospital staff who took part in: surveys (n = 39), interviews (n = 10) and focus groups (n = 12), and 38 people who were interviewed during falls investigations: fallers, family, unit staff and hospital management. Implementation of the SFIM to investigate fall occurrences. Percent of positive responses on the Modified Stanford Patient Safety Culture Survey Instrument converged with qualitative themes on facilitators and barriers for intervention implementation. Both hospital units had an overall poor safety culture which hindered intervention implementation. Facilitators were hospital accreditation, strong emphasis on patient safety, infrastructure and dedicated champions. Barriers included heavy workloads, lack of time, lack of resources and poor communication. Successful implementation of SFIM requires regulatory and organizational support, committed frontline staff and allocation of resources to identify active causes and latent contributing factors to falls. System-wide adjustments show promise for promotion of safety culture in hospitals where falls happen regularly. © The Author 2017. Published by Oxford University Press in association with the International Society for Quality in Health Care. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

15 CFR 970.521 - Safety at sea requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 15 Commerce and Foreign Trade 3 2012-01-01 2012-01-01 false Safety at sea requirements. 970.521..., Conditions and Restrictions Terms, Conditions, and Restrictions § 970.521 Safety at sea requirements. The... and property at sea. These requirements will be established with reference to subpart H of this part. ...

15 CFR 970.521 - Safety at sea requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 15 Commerce and Foreign Trade 3 2014-01-01 2014-01-01 false Safety at sea requirements. 970.521..., Conditions and Restrictions Terms, Conditions, and Restrictions § 970.521 Safety at sea requirements. The... and property at sea. These requirements will be established with reference to subpart H of this part. ...

15 CFR 970.521 - Safety at sea requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 15 Commerce and Foreign Trade 3 2011-01-01 2011-01-01 false Safety at sea requirements. 970.521..., Conditions and Restrictions Terms, Conditions, and Restrictions § 970.521 Safety at sea requirements. The... and property at sea. These requirements will be established with reference to subpart H of this part. ...

15 CFR 970.521 - Safety at sea requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Safety at sea requirements. 970.521..., Conditions and Restrictions Terms, Conditions, and Restrictions § 970.521 Safety at sea requirements. The... and property at sea. These requirements will be established with reference to subpart H of this part. ...

15 CFR 970.521 - Safety at sea requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 15 Commerce and Foreign Trade 3 2013-01-01 2013-01-01 false Safety at sea requirements. 970.521..., Conditions and Restrictions Terms, Conditions, and Restrictions § 970.521 Safety at sea requirements. The... and property at sea. These requirements will be established with reference to subpart H of this part. ...

Exploring the sociotechnical intersection of patient safety and electronic health record implementation

PubMed Central

Meeks, Derek W; Takian, Amirhossein; Sittig, Dean F; Singh, Hardeep; Barber, Nick

2014-01-01

Objective The intersection of electronic health records (EHR) and patient safety is complex. To examine the applicability of two previously developed conceptual models comprehensively to understand safety implications of EHR implementation in the English National Health Service (NHS). Methods We conducted a secondary analysis of interview data from a 30-month longitudinal, prospective, case study-based evaluation of EHR implementation in 12 NHS hospitals. We used a framework analysis approach to apply conceptual models developed by Sittig and Singh to understand better EHR implementation and use: an eight-dimension sociotechnical model and a three-phase patient safety model (safe technology, safe use of technology, and use of technology to improve safety). Results The intersection of patient safety and EHR implementation and use was characterized by risks involving technology (hardware and software, clinical content, and human–computer interfaces), the interaction of technology with non-technological factors, and improper or unsafe use of technology. Our data support that patient safety improvement activities as well as patient safety hazards change as an organization evolves from concerns about safe EHR functionality, ensuring safe and appropriate EHR use, to using the EHR itself to provide ongoing surveillance and monitoring of patient safety. Discussion We demonstrate the face validity of two models for understanding the sociotechnical aspects of safe EHR implementation and the complex interactions of technology within a healthcare system evolving from paper to integrated EHR. Conclusions Using sociotechnical models, including those presented in this paper, may be beneficial to help stakeholders understand, synthesize, and anticipate risks at the intersection of patient safety and health information technology. PMID:24052536

Implementation of the AASHTO Highway Safety Manual

DOT National Transportation Integrated Search

2012-08-01

This report outlines a cost-effective and thoughtful way to implement the Highway Safety Manual (HSM) in Alabama. : The HSM was published by the American Association of State Highway and Transportation Officials, and it was prepared by the Transporta...

Nuclear safety policy working group recommendations on nuclear propulsion safety for the space exploration initiative

NASA Technical Reports Server (NTRS)

Marshall, Albert C.; Lee, James H.; Mcculloch, William H.; Sawyer, J. Charles, Jr.; Bari, Robert A.; Cullingford, Hatice S.; Hardy, Alva C.; Niederauer, George F.; Remp, Kerry; Rice, John W.

1993-01-01

An interagency Nuclear Safety Working Group (NSPWG) was chartered to recommend nuclear safety policy, requirements, and guidelines for the Space Exploration Initiative (SEI) nuclear propulsion program. These recommendations, which are contained in this report, should facilitate the implementation of mission planning and conceptual design studies. The NSPWG has recommended a top-level policy to provide the guiding principles for the development and implementation of the SEI nuclear propulsion safety program. In addition, the NSPWG has reviewed safety issues for nuclear propulsion and recommended top-level safety requirements and guidelines to address these issues. These recommendations should be useful for the development of the program's top-level requirements for safety functions (referred to as Safety Functional Requirements). The safety requirements and guidelines address the following topics: reactor start-up, inadvertent criticality, radiological release and exposure, disposal, entry, safeguards, risk/reliability, operational safety, ground testing, and other considerations.

Analyzing Software Requirements Errors in Safety-Critical, Embedded Systems

NASA Technical Reports Server (NTRS)

Lutz, Robyn R.

1993-01-01

This paper analyzes the root causes of safety-related software errors in safety-critical, embedded systems. The results show that software errors identified as potentially hazardous to the system tend to be produced by different error mechanisms than non- safety-related software errors. Safety-related software errors are shown to arise most commonly from (1) discrepancies between the documented requirements specifications and the requirements needed for correct functioning of the system and (2) misunderstandings of the software's interface with the rest of the system. The paper uses these results to identify methods by which requirements errors can be prevented. The goal is to reduce safety-related software errors and to enhance the safety of complex, embedded systems.

Generalized implementation of software safety policies

NASA Technical Reports Server (NTRS)

Knight, John C.; Wika, Kevin G.

1994-01-01

As part of a research program in the engineering of software for safety-critical systems, we are performing two case studies. The first case study, which is well underway, is a safety-critical medical application. The second, which is just starting, is a digital control system for a nuclear research reactor. Our goal is to use these case studies to permit us to obtain a better understanding of the issues facing developers of safety-critical systems, and to provide a vehicle for the assessment of research ideas. The case studies are not based on the analysis of existing software development by others. Instead, we are attempting to create software for new and novel systems in a process that ultimately will involve all phases of the software lifecycle. In this abstract, we summarize our results to date in a small part of this project, namely the determination and classification of policies related to software safety that must be enforced to ensure safe operation. We hypothesize that this classification will permit a general approach to the implementation of a policy enforcement mechanism.

78 FR 46560 - Pipeline Safety: Class Location Requirements

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-01

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part... class location requirements for gas transmission pipelines. Section 5 of the Pipeline Safety, Regulatory... and, with respect to gas transmission pipeline facilities, whether applying IMP requirements to...

Drug safety assurance through clinical genotyping: near-term considerations for a system-wide implementation of personalized medicine.

PubMed

Kane, Michael D; Springer, John A; Sprague, Jon E

2008-07-01

The rationale and overall system-wide behavior of a clinical genotyping information system (both DNA analysis and data management) requires a near-term, scalable approach, which is emerging in the focused implementation of pharmacogenomics and drug safety assurance. The challenges to implementing a successful clinical genotyping system are described, as are how the benefits of a focused, near-term system for drug safety assessment and assurance overcome the logistical and operational challenges that perpetually hinder the development of a societal-scale clinical genotyping system. This rationale is based on the premise that a focused application domain for clinical genotyping, specifically drug safety assurance, provides a transition paradigm for both professionals and consumers of healthcare, thereby facilitating the movement of genotyping from bench to bedside and paving the way for the adoption of prognostic and diagnostic applications in clinical genomics.

Implementation of Programmatic Quality and the Impact on Safety

NASA Technical Reports Server (NTRS)

Huls, Dale Thomas; Meehan, Kevin

2005-01-01

The purpose of this paper is to discuss the implementation of a programmatic quality assurance discipline within the International Space Station Program and the resulting impact on safety. NASA culture has continued to stress safety at the expense of quality when both are extremely important and both can equally influence the success or failure of a Program or Mission. Although safety was heavily criticized in the media after Colimbiaa, strong case can be made that it was the failure of quality processes and quality assurance in all processes that eventually led to the Columbia accident. Consequently, it is possible to have good quality processes without safety, but it is impossible to have good safety processes without quality. The ISS Program quality assurance function was analyzed as representative of the long-term manned missions that are consistent with the President s Vision for Space Exploration. Background topics are as follows: The quality assurance organizational structure within the ISS Program and the interrelationships between various internal and external organizations. ISS Program quality roles and responsibilities with respect to internal Program Offices and other external organizations such as the Shuttle Program, JSC Directorates, NASA Headquarters, NASA Contractors, other NASA Centers, and International Partner/participants will be addressed. A detailed analysis of implemented quality assurance responsibilities and functions with respect to NASA Headquarters, the JSC S&MA Directorate, and the ISS Program will be presented. Discussions topics are as follows: A comparison of quality and safety resources in terms of staffing, training, experience, and certifications. A benchmark assessment of the lessons learned from the Columbia Accident Investigation (CAB) Report (and follow-up reports and assessments), NASA Benchmarking, and traditional quality assurance activities against ISS quality procedures and practices. The lack of a coherent operational

[Evidence-based clinical oral healthcare guidelines 4. Adherence requires an implementation strategy].

PubMed

Braspenning, J C C; Mettes, T G P H; van der Sanden, W J M; Wensing, M J P

2015-03-01

Adherence to clinical guidelines requires support in practice. However, systematic implementation of evidence-based guidelines is not common practice in oral healthcare. The Knowledge Institute Oral Care (KiMo) offers the opportunity to take into account potential barriers and facilitators during the development of evidence-based clinical practice guidelines. These factors which are relevant to the guideline and the oral healthcare practice provide the ingredients for a tailor-made programme of implementation that has a scientific basis. Elements of any implementation programme are the quality indicators derived from the oral healthcare guidelines. These indicators should fit, on the one hand, the specific goals of the guidelines (patient safety, effectiveness, efficiency, patient-centred, timeliness, accessibility) and, onthe other hand, the various perspectives of the different stakeholders, such as patients, caregivers, health insurers and inspectorate. These quality indicators provide information on adherence to the guidelines, the results of a certain treatment and the success of the implementation strategy, all with the aim to improve the quality of oral healthcare.

Implementation of Recommendations from the One System Comparative Evaluation of the Hanford Tank Farms and Waste Treatment Plant Safety Bases

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garrett, Richard L.; Niemi, Belinda J.; Paik, Ingle K.

2013-11-07

A Comparative Evaluation was conducted for One System Integrated Project Team to compare the safety bases for the Hanford Waste Treatment and Immobilization Plant Project (WTP) and Tank Operations Contract (TOC) (i.e., Tank Farms) by an Expert Review Team. The evaluation had an overarching purpose to facilitate effective integration between WTP and TOC safety bases. It was to provide One System management with an objective evaluation of identified differences in safety basis process requirements, guidance, direction, procedures, and products (including safety controls, key safety basis inputs and assumptions, and consequence calculation methodologies) between WTP and TOC. The evaluation identified 25more » recommendations (Opportunities for Integration). The resolution of these recommendations resulted in 16 implementation plans. The completion of these implementation plans will help ensure consistent safety bases for WTP and TOC along with consistent safety basis processes. procedures, and analyses. and should increase the likelihood of a successful startup of the WTP. This early integration will result in long-term cost savings and significant operational improvements. In addition, the implementation plans lead to the development of eight new safety analysis methodologies that can be used at other U.S. Department of Energy (US DOE) complex sites where URS Corporation is involved.« less

Implementing evidence-based policy in a network setting: road safety policy in the Netherlands.

PubMed

Bax, Charlotte; de Jong, Martin; Koppenjan, Joop

2010-01-01

In the early 1990s, in order to improve road safety in The Netherlands, the Institute for Road Safety Research (SWOV) developed an evidence-based "Sustainable Safety" concept. Based on this concept, Dutch road safety policy, was seen as successful and as a best practice in Europe. In The Netherlands, the policy context has now changed from a sectoral policy setting towards a fragmented network in which safety is a facet of other transport-related policies. In this contribution, it is argued that the implementation strategy underlying Sustainable Safety should be aligned with the changed context. In order to explore the adjustments needed, two perspectives of policy implementation are discussed: (1) national evidence-based policies with sectoral implementation; and (2) decentralized negotiation on transport policy in which road safety is but one aspect. We argue that the latter approach matches the characteristics of the newly evolved policy context best, and conclude with recommendations for reformulating the implementation strategy.

Vitamin D Safety and Requirements

PubMed Central

de Paula, Francisco J.A.; Rosen, Clifford J.

2011-01-01

Vitamin D an ancient secosteroid is essential for mineral homeostasis, bone remodeling, immune modulation, and energy metabolism. Recently, debates have emerged about the daily vitamin D requirements for healthy and elderly adults, the safety and efficacy of long term supplementation and the role of vitamin D deficiency in several chronic disease states. Since this molecule acts as both a vitamin and a hormone, it should not be surprising that the effects of supplementation are multi-faceted and complex. Yet despite significant progress in the last decade, our understanding of vitamin D physiology and the clinical relevance of low circulating levels of this vitamin remains incomplete. The present review provides the reader with a comprehensive and up-to-date understanding of vitamin D requirements and safety. It also raises some provocative research questions. PMID:22179017

Implementing AORN Recommended Practices for Laser Safety.

PubMed

Castelluccio, Donna

2012-05-01

Lasers used in the OR pose many risks to both patients and personnel. AORN's "Recommended practices for laser safety in perioperative practice settings" identifies the potential hazards associated with laser use, such as eye damage and fire- and smoke-related injuries. The practice recommendations are intended to be used as a guide for establishing best practices in the workplace and to give perioperative nurses strategies for implementing the recommended safety measures. A laser safety program should include measures to control access to laser use areas; protect staff members and patients from exposure to the laser beam; provide staff members and patients with the appropriate safety eyewear for use in the laser use area; and protect staff members and patients from surgical smoke, electrical, and fire hazards. Measures such as using a safety checklist or creating a laser cart can help perioperative nurses successfully incorporate the practice recommendations. Patient scenarios are included as examples of how to use the document in real-life situations. Copyright © 2012 AORN, Inc. Published by Elsevier Inc. All rights reserved.

Understanding middle managers' influence in implementing patient safety culture.

PubMed

Gutberg, Jennifer; Berta, Whitney

2017-08-22

The past fifteen years have been marked by large-scale change efforts undertaken by healthcare organizations to improve patient safety and patient-centered care. Despite substantial investment of effort and resources, many of these large-scale or "radical change" initiatives, like those in other industries, have enjoyed limited success - with practice and behavioural changes neither fully adopted nor ultimately sustained - which has in large part been ascribed to inadequate implementation efforts. Culture change to "patient safety culture" (PSC) is among these radical change initiatives, where results to date have been mixed at best. This paper responds to calls for research that focus on explicating factors that affect efforts to implement radical change in healthcare contexts, and focuses on PSC as the radical change implementation. Specifically, this paper offers a novel conceptual model based on Organizational Learning Theory to explain the ability of middle managers in healthcare organizations to influence patient safety culture change. We propose that middle managers can capitalize on their unique position between upper and lower levels in the organization and engage in 'ambidextrous' learning that is critical to implementing and sustaining radical change. This organizational learning perspective offers an innovative way of framing the mid-level managers' role, through both explorative and exploitative activities, which further considers the necessary organizational context in which they operate.

Improved processes for meeting the data requirements for implementing the Highway Safety Manual (HSM) and Safety Analyst in Florida.

DOT National Transportation Integrated Search

2014-03-01

Recent research in highway safety has focused on the more advanced and statistically proven techniques of highway : safety analysis. This project focuses on the two most recent safety analysis tools, the Highway Safety Manual (HSM) : and SafetyAnalys...

Role of champions in the implementation of patient safety practice change.

PubMed

Soo, Stephanie; Berta, Whitney; Baker, G Ross

2009-01-01

Practitioners of patient safety practice change agree that champions are central to the success of implementation. The clinical champion role is a concept that has been widely promoted yet empirically underdeveloped in health services literature. Questions remain as to who these champions are, what roles they play in patient safety practice change and what contexts serve to facilitate their efforts. This investigation used a multiple-case study design to critically examine the role of champions in the implementation of rapid response teams (RRTs), an innovative complex patient safety intervention, in two large urban acute care facilities. An analysis of interviews with key individuals involved in the RRT implementation process revealed a typology of the patient safety practice champion that extended beyond clinical personnel to include managerial and executive staff. Champions engaged to a varying extent in a number of core activities, including education, advocacy, relationship building and boundary spanning. Individuals became champions both through informal emergence and a combination of formal appointment and informal emergence. By identifying and elaborating upon specific features of the champion role, this study aims to expand the dialogue about champions for patient safety practice change.

A strategic approach for Water Safety Plans implementation in Portugal.

PubMed

Vieira, Jose M P

2011-03-01

Effective risk assessment and risk management approaches in public drinking water systems can benefit from a systematic process for hazards identification and effective management control based on the Water Safety Plan (WSP) concept. Good results from WSP development and implementation in a small number of Portuguese water utilities have shown that a more ambitious nationwide strategic approach to disseminate this methodology is needed. However, the establishment of strategic frameworks for systematic and organic scaling-up of WSP implementation at a national level requires major constraints to be overcome: lack of legislation and policies and the need for appropriate monitoring tools. This study presents a framework to inform future policy making by understanding the key constraints and needs related to institutional, organizational and research issues for WSP development and implementation in Portugal. This methodological contribution for WSP implementation can be replicated at a global scale. National health authorities and the Regulator may promote changes in legislation and policies. Independent global monitoring and benchmarking are adequate tools for measuring the progress over time and for comparing the performance of water utilities. Water utilities self-assessment must include performance improvement, operational monitoring and verification. Research and education and resources dissemination ensure knowledge acquisition and transfer.

15 CFR 971.422 - Safety at sea requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 15 Commerce and Foreign Trade 3 2012-01-01 2012-01-01 false Safety at sea requirements. 971.422...: Terms, Conditions and Restrictions Terms, Conditions and Restrictions § 971.422 Safety at sea... and property at sea. These requirements will be established with reference to subpart G of this part. ...

15 CFR 971.422 - Safety at sea requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Safety at sea requirements. 971.422...: Terms, Conditions and Restrictions Terms, Conditions and Restrictions § 971.422 Safety at sea... and property at sea. These requirements will be established with reference to subpart G of this part. ...

15 CFR 971.422 - Safety at sea requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 15 Commerce and Foreign Trade 3 2011-01-01 2011-01-01 false Safety at sea requirements. 971.422...: Terms, Conditions and Restrictions Terms, Conditions and Restrictions § 971.422 Safety at sea... and property at sea. These requirements will be established with reference to subpart G of this part. ...

15 CFR 971.422 - Safety at sea requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 15 Commerce and Foreign Trade 3 2014-01-01 2014-01-01 false Safety at sea requirements. 971.422...: Terms, Conditions and Restrictions Terms, Conditions and Restrictions § 971.422 Safety at sea... and property at sea. These requirements will be established with reference to subpart G of this part. ...

15 CFR 971.422 - Safety at sea requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 15 Commerce and Foreign Trade 3 2013-01-01 2013-01-01 false Safety at sea requirements. 971.422...: Terms, Conditions and Restrictions Terms, Conditions and Restrictions § 971.422 Safety at sea... and property at sea. These requirements will be established with reference to subpart G of this part. ...

Safety benefits of implementing adaptive signal control technology : survey results.

DOT National Transportation Integrated Search

2013-01-01

The safety benefits and costs associated with implementing adaptive signal control technology (ASCT) were evaluated in : this study. A user-friendly online survey was distributed to 62 agencies that had implemented ASCT in the United States. : Twenty...

Michigan safety belt use immediately following implementation of standard enforcement

DOT National Transportation Integrated Search

2000-05-01

Reported here are the results of a direct observation survey of safety belt use conducted in March 2000 to determine the effect the implementation of standard enforcement legislation has had on Michigan's safety belt use rate. In this study, 11,687 o...

The Implementation of Payload Safety in an Operational Environment

NASA Technical Reports Server (NTRS)

Cissom, R. D.; Horvath, Tim J.; Watson, Kristi S.; Rogers, Mark N. (Technical Monitor); Vanhooser, T. (Technical Monitor)

2002-01-01

The objective of this paper is to define the safety life-cycle process for a payload beginning with the output of the Payload Safety Review Panel and continuing through the life of the payload on-orbit. It focuses on the processes and products of the operations safety implementation through the increment preparations and real-time operations processes. In addition, the paper addresses the role of the Payload Operations and Integration Center and the interfaces to the International Partner Payload Control Centers.

Changing Operating Room Culture: Implementation of a Postoperative Debrief and Improved Safety Culture.

PubMed

Magill, Stephen T; Wang, Doris D; Rutledge, W Caleb; Lau, Darryl; Berger, Mitchel S; Sankaran, Sujatha; Lau, Catherine Y; Imershein, Sarah G

2017-11-01

Patient safety is foundational to neurosurgical care. Postprocedural "debrief" checklists have been proposed to improve patient safety, but data about their use in neurosurgery are limited. Here, we implemented an initiative to routinely perform postoperative debriefs and evaluated the impact of debriefing on operating room (OR) safety culture. A 10-question safety attitude questionnaire (SAQ) was sent to neurosurgical OR staff at a major academic medical center before and 18 months after the implementation of a postoperative debriefing initiative. Rates of debrief compliance and changes in attitudes before and after the survey were evaluated. The survey used a Likert scale and analyzed with standard statistical methods. After the debrief initiative, the rate of debriefing increased from 51% to 86% of cases for the neurosurgery service. Baseline SAQ responses found that neurosurgeons had a more favorable perception of OR safety than did anesthesiologists and nurses. After implementation of the postoperative debriefing process, perceptions of OR safety significantly improved for neurosurgeons, anesthesiologists, and nurses. Furthermore, the disparity between nurses and surgeons was no longer significant. After debrief implementation, neurosurgical OR staff had improved perceptions of patient safety compared with surgical services that did not commonly perform debriefing. Debriefing identified OR efficiency concerns in 26.9% of cases, and prevention of potential adverse events/near misses was reported in 8% of cases. Postoperative debriefing can be effectively introduced into the OR and improves the safety culture after implementation. Debriefing is an effective tool to identify OR inefficiencies and potential adverse events. Copyright © 2017 Elsevier Inc. All rights reserved.

Requirements for the design and implementation of checklists for surgical processes.

PubMed

Verdaasdonk, E G G; Stassen, L P S; Widhiasmara, P P; Dankelman, J

2009-04-01

The use of checklists is a promising strategy for improving patient safety in all types of surgical processes inside and outside the operating room. This article aims to provide requirements and implementation of checklists for surgical processes. The literature on checklist use in the operating room was reviewed based on research using Medline, Pubmed, and Google Scholar. Although all the studies showed positive effects and important benefits such as improved team cohesion, improved awareness of safety issues, and reduction of errors, their number still is limited. The motivation of team members is considered essential for compliance. Currently, no general guidelines exist for checklist design in the surgical field. Based on the authors' experiences and on guidelines used in the aviation industry, requirements for the checklist design are proposed. The design depends on the checklist purpose, philosophy, and method chosen. The methods consist of the "call-do-response" approach," the "do-verify" approach, or a combination of both. The advantages and disadvantages of paper versus electronic solutions are discussed. Furthermore, a step-by-step strategy of how to implement a checklist in the clinical situation is suggested. The use of structured checklists in surgical processes is most likely to be effective because it standardizes human performance and ensures that procedures are followed correctly instead of relying on human memory alone. Several studies present promising and positive first results, providing a solid basis for further investigation. Future research should focus on the effect of various checklist designs and strategies to ensure maximal compliance.

Manned space flight nuclear system safety. Volume 6: Space base nuclear system safety plan

NASA Technical Reports Server (NTRS)

1972-01-01

A qualitative identification of the steps required to assure the incorporation of radiological system safety principles and objectives into all phases of a manned space base program are presented. Specific areas of emphasis include: (1) radiological program management, (2) nuclear system safety plan implementation, (3) impact on program, and (4) summary of the key operation and design guidelines and requirements. The plan clearly indicates the necessity of considering and implementing radiological system safety recommendations as early as possible in the development cycle to assure maximum safety and minimize the impact on design and mission plans.

49 CFR 451.21 - Safety approval plate required.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 6 2010-10-01 2010-10-01 false Safety approval plate required. 451.21 Section 451.21 Transportation Other Regulations Relating to Transportation (Continued) COAST GUARD, DEPARTMENT OF HOMELAND SECURITY SAFETY APPROVAL OF CARGO CONTAINERS TESTING AND APPROVAL OF CONTAINERS Safety Approval...

49 CFR 451.21 - Safety approval plate required.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 6 2011-10-01 2011-10-01 false Safety approval plate required. 451.21 Section 451.21 Transportation Other Regulations Relating to Transportation (Continued) COAST GUARD, DEPARTMENT OF HOMELAND SECURITY SAFETY APPROVAL OF CARGO CONTAINERS TESTING AND APPROVAL OF CONTAINERS Safety Approval...

49 CFR 451.21 - Safety approval plate required.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 6 2012-10-01 2012-10-01 false Safety approval plate required. 451.21 Section 451.21 Transportation Other Regulations Relating to Transportation (Continued) COAST GUARD, DEPARTMENT OF HOMELAND SECURITY SAFETY APPROVAL OF CARGO CONTAINERS TESTING AND APPROVAL OF CONTAINERS Safety Approval...

49 CFR 451.21 - Safety approval plate required.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 6 2014-10-01 2014-10-01 false Safety approval plate required. 451.21 Section 451.21 Transportation Other Regulations Relating to Transportation (Continued) COAST GUARD, DEPARTMENT OF HOMELAND SECURITY SAFETY APPROVAL OF CARGO CONTAINERS TESTING AND APPROVAL OF CONTAINERS Safety Approval...

49 CFR 451.21 - Safety approval plate required.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 6 2013-10-01 2013-10-01 false Safety approval plate required. 451.21 Section 451.21 Transportation Other Regulations Relating to Transportation (Continued) COAST GUARD, DEPARTMENT OF HOMELAND SECURITY SAFETY APPROVAL OF CARGO CONTAINERS TESTING AND APPROVAL OF CONTAINERS Safety Approval...

Implementation of the Wyoming rural road safety program.

DOT National Transportation Integrated Search

2011-11-01

SAFETEA-LU contains language indicating that State Department of Transportation (DOTs) will be required to address safety on local and rural roads. It is important for state, county, and city officials to cooperate in producing a comprehensive safety...

OSHA safety requirements for hazardous chemicals in the workplace.

PubMed

Dohms, J

1992-01-01

This article outlines the Occupational Safety and Health Administration (OSHA) requirements set forth by the Hazard Communication Standard, which has been in effect for the healthcare industry since 1987. Administrators who have not taken concrete steps to address employee health and safety issues relating to hazardous chemicals are encouraged to do so to avoid the potential of large fines for cited violations. While some states administer their own occupational safety and health programs, they must adopt standards and enforce requirements that are at least as effective as federal requirements.

Pharmacist Staffing, Technology Use, and Implementation of Medication Safety Practices in Rural Hospitals

ERIC Educational Resources Information Center

Casey, Michelle M.; Moscovice, Ira S.; Davidson, Gestur

2006-01-01

Context: Medication safety is clearly an important quality issue for rural hospitals. However, rural hospitals face special challenges implementing medication safety practices in terms of their staffing and financial and technical resources. Purpose: This study assessed the capacity of small rural hospitals to implement medication safety…

High-Speed Maglev Trains; German Safety Requirements

DOT National Transportation Integrated Search

1991-12-31

This document is a translation of technology-specific safety requirements developed : for the German Transrapid Maglev technology. These requirements were developed by a : working group composed of representatives of German Federal Railways (DB), Tes...

The End-To-End Safety Verification Process Implemented to Ensure Safe Operations of the Columbus Research Module

NASA Astrophysics Data System (ADS)

Arndt, J.; Kreimer, J.

2010-09-01

The European Space Laboratory COLUMBUS was launched in February 2008 with NASA Space Shuttle Atlantis. Since successful docking and activation this manned laboratory forms part of the International Space Station(ISS). Depending on the objectives of the Mission Increments the on-orbit configuration of the COLUMBUS Module varies with each increment. This paper describes the end-to-end verification which has been implemented to ensure safe operations under the condition of a changing on-orbit configuration. That verification process has to cover not only the configuration changes as foreseen by the Mission Increment planning but also those configuration changes on short notice which become necessary due to near real-time requests initiated by crew or Flight Control, and changes - most challenging since unpredictable - due to on-orbit anomalies. Subject of the safety verification is on one hand the on orbit configuration itself including the hardware and software products, on the other hand the related Ground facilities needed for commanding of and communication to the on-orbit System. But also the operational products, e.g. the procedures prepared for crew and ground control in accordance to increment planning, are subject of the overall safety verification. In order to analyse the on-orbit configuration for potential hazards and to verify the implementation of the related Safety required hazard controls, a hierarchical approach is applied. The key element of the analytical safety integration of the whole COLUMBUS Payload Complement including hardware owned by International Partners is the Integrated Experiment Hazard Assessment(IEHA). The IEHA especially identifies those hazardous scenarios which could potentially arise through physical and operational interaction of experiments. A major challenge is the implementation of a Safety process which owns quite some rigidity in order to provide reliable verification of on-board Safety and which likewise provides enough

75 FR 67450 - Pipeline Safety: Control Room Management Implementation Workshop

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-02

... PHMSA-2010-0294] Pipeline Safety: Control Room Management Implementation Workshop AGENCY: Pipeline and...) on the implementation of pipeline control room management. The workshop is intended to foster an understanding of the Control Room Management Rule issued by PHMSA on December 3, 2009, and is open to the public...

TA-55 Final Safety Analysis Report Comparison Document and DOE Safety Evaluation Report Requirements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alan Bond

2001-04-01

This document provides an overview of changes to the currently approved TA-55 Final Safety Analysis Report (FSAR) that are included in the upgraded FSAR. The DOE Safety Evaluation Report (SER) requirements that are incorporated into the upgraded FSAR are briefly discussed to provide the starting point in the FSAR with respect to the SER requirements.

78 FR 59906 - Pipeline Safety: Class Location Requirements

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-30

... 192 [Docket No. PHMSA-2013-0161] Pipeline Safety: Class Location Requirements AGENCY: Pipeline and... Location Requirements,'' seeking comments on whether integrity management program (IMP) requirements, or... for class location requirements. PHMSA has received two requests to extend the comment period to allow...

75 FR 1276 - Requirements for Subsurface Safety Valve Equipment

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-11

...-0066] RIN 1010-AD45 Requirements for Subsurface Safety Valve Equipment AGENCY: Minerals Management... Edition of the American Petroleum Institute's Specification for Subsurface Safety Valve Equipment (API... 14A, Specification for Subsurface Safety Valve Equipment, Eleventh Edition, October 2005, Effective...

Analysis of microgravity space experiments Space Shuttle programmatic safety requirements

NASA Technical Reports Server (NTRS)

Terlep, Judith A.

1996-01-01

This report documents the results of an analysis of microgravity space experiments space shuttle programmatic safety requirements and recommends the creation of a Safety Compliance Data Package (SCDP) Template for both flight and ground processes. These templates detail the programmatic requirements necessary to produce a complete SCDP. The templates were developed from various NASA centers' requirement documents, previously written guidelines on safety data packages, and from personal experiences. The templates are included in the back as part of this report.

NASA System Safety Handbook. Volume 1; System Safety Framework and Concepts for Implementation

NASA Technical Reports Server (NTRS)

Dezfuli, Homayoon; Benjamin, Allan; Everett, Christopher; Smith, Curtis; Stamatelatos, Michael; Youngblood, Robert

2011-01-01

System safety assessment is defined in NPR 8715.3C, NASA General Safety Program Requirements as a disciplined, systematic approach to the analysis of risks resulting from hazards that can affect humans, the environment, and mission assets. Achievement of the highest practicable degree of system safety is one of NASA's highest priorities. Traditionally, system safety assessment at NASA and elsewhere has focused on the application of a set of safety analysis tools to identify safety risks and formulate effective controls.1 Familiar tools used for this purpose include various forms of hazard analyses, failure modes and effects analyses, and probabilistic safety assessment (commonly also referred to as probabilistic risk assessment (PRA)). In the past, it has been assumed that to show that a system is safe, it is sufficient to provide assurance that the process for identifying the hazards has been as comprehensive as possible and that each identified hazard has one or more associated controls. The NASA Aerospace Safety Advisory Panel (ASAP) has made several statements in its annual reports supporting a more holistic approach. In 2006, it recommended that "... a comprehensive risk assessment, communication and acceptance process be implemented to ensure that overall launch risk is considered in an integrated and consistent manner." In 2009, it advocated for "... a process for using a risk-informed design approach to produce a design that is optimally and sufficiently safe." As a rationale for the latter advocacy, it stated that "... the ASAP applauds switching to a performance-based approach because it emphasizes early risk identification to guide designs, thus enabling creative design approaches that might be more efficient, safer, or both." For purposes of this preface, it is worth mentioning three areas where the handbook emphasizes a more holistic type of thinking. First, the handbook takes the position that it is important to not just focus on risk on an individual

Implementation of the WHO Surgical Safety Checklist in an Ethiopian Referral Hospital

PubMed Central

2014-01-01

Background The WHO Surgical Safety Checklist has a growing evidence base to support its role in improving perioperative safety, although its impact is likely to be directly related to the effectiveness of its implementation. There remains a paucity of documented experience from low-resource settings on Checklist implementation approaches. We report an implementation strategy in a public referral hospital in Addis Ababa, Ethiopia, based on consultation, local leadership, formal introduction, and supported supervision with subsequent audit and feedback. Methods Planning, implementation and assessment took place from December 2011 to December 2012. The planning phase, from December 2011 until April 2012, involved a multidisciplinary consultative approach using local leaders, volunteer clinicians, and staff from non-governmental organisations, to draw up a locally agreed and appropriate Checklist. Implementation in April 2012 involved formal teaching and discussion, simulation sessions and role play, with supportive supervision following implementation. Assessment was performed using completed Checklist analysis and staff satisfaction questionnaires at one month and further Checklist analysis combined with semi-structured interviews in December 2012. Results and discussion Checklist compliance rates were 83% for general anaesthetics at one month after implementation, with an overall compliance rate of 65% at eight months. There was a decrease in Checklist compliance over the period of the study to less than 20% by the end of the study period. The ‘Sign out’ section was reported as being the most difficult section of the Checklist to complete, and was missed completely in 21% of cases. The most commonly missed single item was the team introduction at the start of each case. However, we report high staff satisfaction with the Checklist and enthusiasm for its continued use. Conclusion We report a detailed implementation strategy for introducing the WHO Surgical Safety

Effect of implementation of safety measures in tae kwon do competition

PubMed Central

Burke, D; Barfoot, K; Bryant, S; Schneider, J; Kim, H; Levin, G

2003-01-01

Background: Previous reviews of tae kwon do (TKD) tournaments have documented injury rates of 25/1000 to 12.7/100 athlete exposures. Most injuries have been reported to be to the head and the neck and are occasionally very serious. Many of these studies involved high level TKD competitions with minimal safety precautions. Recently, safety measures have been implemented in many TKD competitions. Objective: To evaluate retrospectively the incidence of injuries in TKD competitions involving a wide range of participants and featuring extensive safety precautions. Methods: A total of 2498 participants ranged in age from 18 to 66, included both men and women, and ranged in rank from yellow to black belt. Traumas, defined as any event requiring interaction with medical staff, were documented with respect to mechanism, diagnosis, treatment, and follow up recommendations. An injury was defined as a trauma that prevented a contestant from resuming competition on the day that the trauma occurred, according to National Collegiate Athletic Association criteria. Results: The injury rate was 0.4/1000 athlete exposures. This is lower than reported in previous studies of TKD tournaments and in many other sports. Conclusion: TKD tournaments that emphasise limited contact, protective equipment, and medical supervision are relatively safe and compare favourably with other sports. PMID:14514529

Health, safety and environmental requirements for composite materials

NASA Technical Reports Server (NTRS)

Hazer, Kathleen A.

1994-01-01

The health, safety and environmental requirements for the production of composite materials are discussed. The areas covered include: (1) chemical identification for each chemical; (2) toxicology; (3) industrial hygiene; (4) fire and safety; (5) environmental aspects; and (6) medical concerns.

Requirements Analysis for the Army Safety Management Information System (ASMIS)

DTIC Science & Technology

1989-03-01

8217_>’ Telephone Number « .. PNL-6819 Limited Distribution Requirements Analysis for the Army Safety Management Information System (ASMIS) Final...PNL-6819 REQUIREMENTS ANALYSIS FOR THE ARMY SAFETY MANAGEMENT INFORMATION SYSTEM (ASMIS) FINAL REPORT J. S. Littlefield A. L. Corrigan March...accidents. This accident data is available under the Army Safety Management Information System (ASMIS) which is an umbrella for many databases

What stage are low-income and middle-income countries (LMICs) at with patient safety curriculum implementation and what are the barriers to implementation? A two-stage cross-sectional study

PubMed Central

Ginsburg, Liane R; Dhingra-Kumar, Neelam; Donaldson, Liam J

2017-01-01

Objectives The improvement of safety in healthcare worldwide depends in part on the knowledge, skills and attitudes of staff providing care. Greater patient safety content in health professional education and training programmes has been advocated internationally. While WHO Patient Safety Curriculum Guides (for Medical Schools and Multi-Professional Curricula) have been widely disseminated in low-income and middle-income countries (LMICs) over the last several years, little is known about patient safety curriculum implementation beyond high-income countries. The present study examines patient safety curriculum implementation in LMICs. Methods Two cross-sectional surveys were carried out. First, 88 technical officers in Ministries of Health and WHO country offices were surveyed to identify the pattern of patient safety curricula at country level. A second survey followed that gathered information from 71 people in a position to provide institution-level perspectives on patient safety curriculum implementation. Results The majority, 69% (30/44), of the countries were either considering whether to implement a patient safety curriculum or actively planning, rather than actually implementing, or embedding one. Most organisations recognised the need for patient safety education and training and felt a safety curriculum was compatible with the values of their organisation; however, important faculty-level barriers to patient safety curriculum implementation were identified. Key structural markers, such as dedicated financial resources and relevant assessment tools to evaluate trainees’ patient safety knowledge and skills, were in place in fewer than half of organisations studied. Conclusions Greater attention to patient safety curriculum implementation is needed. The barriers to patient safety curriculum implementation we identified in LMICs are not unique to these regions. We propose a framework to act as a global standard for patient safety curriculum implementation

Verification and Implementation of Operations Safety Controls for Flight Missions

NASA Technical Reports Server (NTRS)

Smalls, James R.; Jones, Cheryl L.; Carrier, Alicia S.

2010-01-01

There are several engineering disciplines, such as reliability, supportability, quality assurance, human factors, risk management, safety, etc. Safety is an extremely important engineering specialty within NASA, and the consequence involving a loss of crew is considered a catastrophic event. Safety is not difficult to achieve when properly integrated at the beginning of each space systems project/start of mission planning. The key is to ensure proper handling of safety verification throughout each flight/mission phase. Today, Safety and Mission Assurance (S&MA) operations engineers continue to conduct these flight product reviews across all open flight products. As such, these reviews help ensure that each mission is accomplished with safety requirements along with controls heavily embedded in applicable flight products. Most importantly, the S&MA operations engineers are required to look for important design and operations controls so that safety is strictly adhered to as well as reflected in the final flight product.

Exploring the Effects of Cultural Variables in the Implementation of Behavior-Based Safety in Two Organizations

ERIC Educational Resources Information Center

Bumstead, Alaina; Boyce, Thomas E.

2005-01-01

The present case study examines how culture can influence behavior-based safety in different organizational settings and how behavior-based safety can impact different organizational cultures. Behavior-based safety processes implemented in two culturally diverse work settings are described. Specifically, despite identical implementation plans,…

Transit safety retrofit package development : applications requirements document.

DOT National Transportation Integrated Search

2014-05-01

This Application Requirements Document for the Transit Safety Retrofit Package (TRP) Development captures the system, hardware and software requirements towards fulfilling the technical objectives stated within the contract. To achieve the objective ...

What stage are low-income and middle-income countries (LMICs) at with patient safety curriculum implementation and what are the barriers to implementation? A two-stage cross-sectional study.

PubMed

Ginsburg, Liane R; Dhingra-Kumar, Neelam; Donaldson, Liam J

2017-06-15

The improvement of safety in healthcare worldwide depends in part on the knowledge, skills and attitudes of staff providing care. Greater patient safety content in health professional education and training programmes has been advocated internationally. While WHO Patient Safety Curriculum Guides (for Medical Schools and Multi-Professional Curricula) have been widely disseminated in low-income and middle-income countries (LMICs) over the last several years, little is known about patient safety curriculum implementation beyond high-income countries. The present study examines patient safety curriculum implementation in LMICs. Two cross-sectional surveys were carried out. First, 88 technical officers in Ministries of Health and WHO country offices were surveyed to identify the pattern of patient safety curricula at country level. A second survey followed that gathered information from 71 people in a position to provide institution-level perspectives on patient safety curriculum implementation. The majority, 69% (30/44), of the countries were either considering whether to implement a patient safety curriculum or actively planning, rather than actually implementing, or embedding one. Most organisations recognised the need for patient safety education and training and felt a safety curriculum was compatible with the values of their organisation; however, important faculty-level barriers to patient safety curriculum implementation were identified. Key structural markers, such as dedicated financial resources and relevant assessment tools to evaluate trainees' patient safety knowledge and skills, were in place in fewer than half of organisations studied. Greater attention to patient safety curriculum implementation is needed. The barriers to patient safety curriculum implementation we identified in LMICs are not unique to these regions. We propose a framework to act as a global standard for patient safety curriculum implementation. Educating leaders through the system in

Structural Design Requirements and Factors of Safety for Spaceflight Hardware: For Human Spaceflight. Revision A

NASA Technical Reports Server (NTRS)

Bernstein, Karen S.; Kujala, Rod; Fogt, Vince; Romine, Paul

2011-01-01

This document establishes the structural requirements for human-rated spaceflight hardware including launch vehicles, spacecraft and payloads. These requirements are applicable to Government Furnished Equipment activities as well as all related contractor, subcontractor and commercial efforts. These requirements are not imposed on systems other than human-rated spacecraft, such as ground test articles, but may be tailored for use in specific cases where it is prudent to do so such as for personnel safety or when assets are at risk. The requirements in this document are focused on design rather than verification. Implementation of the requirements is expected to be described in a Structural Verification Plan (SVP), which should describe the verification of each structural item for the applicable requirements. The SVP may also document unique verifications that meet or exceed these requirements with NASA Technical Authority approval.

Implementation Science: New Approaches to Integrating Quality and Safety Education for Nurses Competencies in Nursing Education.

PubMed

Dolansky, Mary A; Schexnayder, Julie; Patrician, Patricia A; Sales, Anne

Although quality and safety competencies were developed and disseminated nearly a decade ago by the Quality and Safety Education for Nurses (QSEN) project, the uptake in schools of nursing has been slow. The use of implementation science methods may be useful to accelerate quality and safety competency integration in nursing education. The article includes a definition and description of implementation science methods and practical implementation strategies for nurse educators to consider when integrating the QSEN competencies into nursing curriculum.

NASA Software Safety Standard

NASA Technical Reports Server (NTRS)

Rosenberg, Linda

1997-01-01

If software is a critical element in a safety critical system, it is imperative to implement a systematic approach to software safety as an integral part of the overall system safety programs. The NASA-STD-8719.13A, "NASA Software Safety Standard", describes the activities necessary to ensure that safety is designed into software that is acquired or developed by NASA, and that safety is maintained throughout the software life cycle. A PDF version, is available on the WWW from Lewis. A Guidebook that will assist in the implementation of the requirements in the Safety Standard is under development at the Lewis Research Center (LeRC). After completion, it will also be available on the WWW from Lewis.

10 CFR 851.12 - Implementation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... ENERGY WORKER SAFETY AND HEALTH PROGRAM Program Requirements § 851.12 Implementation. (a) Contractors... taking any additional protective action that is determined to be necessary to protect the safety and health of workers. ...

76 FR 5494 - Pipeline Safety: Mechanical Fitting Failure Reporting Requirements

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-01

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part... Safety: Mechanical Fitting Failure Reporting Requirements AGENCY: Pipeline and Hazardous Materials Safety... tightening. A widely accepted industry guidance document, Gas Pipeline Technical Committee (GPTC) Guide, does...

Manned space flight nuclear system safety. Volume 5: Nuclear System safety guidelines. Part 1: Space base nuclear safety

NASA Technical Reports Server (NTRS)

1972-01-01

The design and operations guidelines and requirements developed in the study of space base nuclear system safety are presented. Guidelines and requirements are presented for the space base subsystems, nuclear hardware (reactor, isotope sources, dynamic generator equipment), experiments, interfacing vehicles, ground support systems, range safety and facilities. Cross indices and references are provided which relate guidelines to each other, and to substantiating data in other volumes. The guidelines are intended for the implementation of nuclear safety related design and operational considerations in future space programs.

Food Safety Programs Based on HACCP Principles in School Nutrition Programs: Implementation Status and Factors Related to Implementation

ERIC Educational Resources Information Center

Stinson, Wendy Bounds; Carr, Deborah; Nettles, Mary Frances; Johnson, James T.

2011-01-01

Purpose/Objectives: The objectives of this study were to assess the extent to which school nutrition (SN) programs have implemented food safety programs based on Hazard Analysis and Critical Control Point (HACCP) principles, as well as factors, barriers, and practices related to implementation of these programs. Methods: An online survey was…

Safety in earth orbit study. Volume 5: Space shuttle payloads: Safety requirements and guidelines on-orbit phase

NASA Technical Reports Server (NTRS)

1972-01-01

Safety requirements and guidelines are listed for the sortie module, upper stage vehicle, and space station for the earth orbit operations of the space shuttle program. The requirements and guidelines are for vehicle design, safety devices, warning devices, operational procedures, and residual hazards.

Food safety systems in a small dairy factory: implementation, major challenges, and assessment of systems' performances.

PubMed

Cusato, Sueli; Gameiro, Augusto H; Corassin, Carlos H; Sant'ana, Anderson S; Cruz, Adriano G; Faria, José de Assis F; de Oliveira, Carlos Augusto F

2013-01-01

The present study describes the implementation of a food safety system in a dairy processing plant located in the State of São Paulo, Brazil, and the challenges found during the process. In addition, microbiological indicators have been used to assess system's implementation performance. The steps involved in the implementation of a food safety system included a diagnosis of the prerequisites, implementation of the good manufacturing practices (GMPs), sanitation standard operating procedures (SSOPs), training of the food handlers, and hazard analysis and critical control point (HACCP). In the initial diagnosis, conformity with 70.7% (n=106) of the items analyzed was observed. A total of 12 critical control points (CCPs) were identified: (1) reception of the raw milk, (2) storage of the raw milk, (3 and 4) reception of the ingredients and packaging, (5) milk pasteurization, (6 and 7) fermentation and cooling, (8) addition of ingredients, (9) filling, (10) storage of the finished product, (11) dispatching of the product, and (12) sanitization of the equipment. After implementation of the food safety system, a significant reduction in the yeast and mold count was observed (p<0.05). The main difficulties encountered for the implementation of food safety system were related to the implementation of actions established in the flow chart and to the need for constant training/adherence of the workers to the system. Despite this, the implementation of the food safety system was shown to be challenging, but feasible to be reached by small-scale food industries.

Safe laser application requires more than laser safety

NASA Astrophysics Data System (ADS)

Frevel, A.; Steffensen, B.; Vassie, L.

1995-02-01

An overview is presented concerning aspects of laser safety in European industrial laser use. Surveys indicate that there is a large variation in the safety strategies amongst industrial laser users. Some key problem areas are highlighted. Emission of hazardous substances is a major problem for users of laser material processing systems where the majority of the particulate is of a sub-micrometre size, presenting a respiratory hazard. Studies show that in many cases emissions are not frequently monitored in factories and uncertainty exists over the hazards. Operators of laser machines do not receive adequate job training or safety training. The problem is compounded by a plethora of regulations and standards which are difficult to interpret and implement, and inspectors who are not conversant with the technology or the issues. A case is demonstrated for a more integrated approach to laser safety, taking into account the development of laser applications, organizational and personnel development, in addition to environmental and occupational health and safety aspects. It is necessary to achieve a harmonization between these elements in any organization involved in laser technology. This might be achieved through establishing technology transfer centres in laser technology.

Hazard Analysis and Safety Requirements for Small Drone Operations: To What Extent Do Popular Drones Embed Safety?

PubMed

Plioutsias, Anastasios; Karanikas, Nektarios; Chatzimihailidou, Maria Mikela

2018-03-01

Currently, published risk analyses for drones refer mainly to commercial systems, use data from civil aviation, and are based on probabilistic approaches without suggesting an inclusive list of hazards and respective requirements. Within this context, this article presents: (1) a set of safety requirements generated from the application of the systems theoretic process analysis (STPA) technique on a generic small drone system; (2) a gap analysis between the set of safety requirements and the ones met by 19 popular drone models; (3) the extent of the differences between those models, their manufacturers, and the countries of origin; and (4) the association of drone prices with the extent they meet the requirements derived by STPA. The application of STPA resulted in 70 safety requirements distributed across the authority, manufacturer, end user, or drone automation levels. A gap analysis showed high dissimilarities regarding the extent to which the 19 drones meet the same safety requirements. Statistical results suggested a positive correlation between drone prices and the extent that the 19 drones studied herein met the safety requirements generated by STPA, and significant differences were identified among the manufacturers. This work complements the existing risk assessment frameworks for small drones, and contributes to the establishment of a commonly endorsed international risk analysis framework. Such a framework will support the development of a holistic and methodologically justified standardization scheme for small drone flights. © 2017 Society for Risk Analysis.

A Step Toward High Reliability: Implementation of a Daily Safety Brief in a Children's Hospital.

PubMed

Saysana, Michele; McCaskey, Marjorie; Cox, Elaine; Thompson, Rachel; Tuttle, Lora K; Haut, Paul R

2017-09-01

Health care is a high-risk industry. To improve communication about daily events and begin the journey toward a high reliability organization, the Riley Hospital for Children at Indiana University Health implemented a daily safety brief. Various departments in our children's hospital were asked to participate in a daily safety brief, reporting daily events and unexpected outcomes within their scope of responsibility. Participants were surveyed before and after implementation of the safety brief about communication and awareness of events in the hospital. The length of the brief and percentage of departments reporting unexpected outcomes were measured. The analysis of the presurvey and the postsurvey showed a statistically significant improvement in the questions related to the awareness of daily events as well as communication and relationships between departments. The monthly mean length of time for the brief was 15 minutes or less. Unexpected outcomes were reported by 50% of the departments for 8 months. A daily safety brief can be successfully implemented in a children's hospital. Communication between departments and awareness of daily events were improved. Implementation of a daily safety brief is a step toward becoming a high reliability organization.

Safety assessment in plant layout design using indexing approach: implementing inherent safety perspective. Part 1 - guideword applicability and method description.

PubMed

Tugnoli, Alessandro; Khan, Faisal; Amyotte, Paul; Cozzani, Valerio

2008-12-15

Layout planning plays a key role in the inherent safety performance of process plants since this design feature controls the possibility of accidental chain-events and the magnitude of possible consequences. A lack of suitable methods to promote the effective implementation of inherent safety in layout design calls for the development of new techniques and methods. In the present paper, a safety assessment approach suitable for layout design in the critical early phase is proposed. The concept of inherent safety is implemented within this safety assessment; the approach is based on an integrated assessment of inherent safety guideword applicability within the constraints typically present in layout design. Application of these guidewords is evaluated along with unit hazards and control devices to quantitatively map the safety performance of different layout options. Moreover, the economic aspects related to safety and inherent safety are evaluated by the method. Specific sub-indices are developed within the integrated safety assessment system to analyze and quantify the hazard related to domino effects. The proposed approach is quick in application, auditable and shares a common framework applicable in other phases of the design lifecycle (e.g. process design). The present work is divided in two parts: Part 1 (current paper) presents the application of inherent safety guidelines in layout design and the index method for safety assessment; Part 2 (accompanying paper) describes the domino hazard sub-index and demonstrates the proposed approach with a case study, thus evidencing the introduction of inherent safety features in layout design.

Implementation of Programmatic Quality and the Impact on Safety

NASA Astrophysics Data System (ADS)

Huls, Dale T.; Meehan, Kevin M.

2005-12-01

The implementation of an inadequate programmatic quality assurance discipline has the potential to adversely affect safety and mission success. This is best demonstrated in the lessons provided by the Apollo 1 Apollo 13 Challenger, and Columbia accidents; NASA Safety and Mission Assurance (S&MA) benchmarking exchanges; and conclusions reached by the Shuttle Return-to-Flight Task Group established following the Columbia Shuttle accident. Examples from the ISS Program demonstrate continuing issues with programmatic quality. Failure to adequately address programmatic quality assurance issues has a real potential to lead to continued inefficiency, increases in program costs, and additional catastrophic accidents.

Implementation of the Generic Safety Analysis Report - Lessons Learned

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blanchard, A.

1999-06-02

The Savannah River Site has completed the development, review and approval process for the Generic Safety Analysis Report (GSAR) and implemented this information in facility SARs and BIOs. This includes the yearly revision of the GSAR and the facility-specific SARs. The process has provided us with several lessons learned.

Implementing electronic handover: interventions to improve efficiency, safety and sustainability.

PubMed

Alhamid, Sharifah Munirah; Lee, Desmond Xue-Yuan; Wong, Hei Man; Chuah, Matthew Bingfeng; Wong, Yu Jun; Narasimhalu, Kaavya; Tan, Thuan Tong; Low, Su Ying

2016-10-01

Effective handovers are critical for patient care and safety. Electronic handover tools are increasingly used today to provide an effective and standardized platform for information exchange. The implementation of an electronic handover system in tertiary hospitals can be a major challenge. Previous efforts in implementing an electronic handover tool failed due to poor compliance and buy-in from end-users. A new electronic handover tool was developed and incorporated into the existing electronic medical records (EMRs) for medical patients in Singapore General Hospital (SGH). There was poor compliance by on-call doctors in acknowledging electronic handovers, and lack of adherence to safety rules, raising concerns about the safety and efficiency of the electronic handover tool. Urgent measures were needed to ensure its safe and sustained use. A quality improvement group comprising stakeholders, including end-users, developed multi-faceted interventions using rapid PDSA (P-Plan, D-Do, S-Study, A-Act ) cycles to address these issues. Innovative solutions using media and online software provided cost-efficient measures to improve compliance. The percentage of unacknowledged handovers per day was used as the main outcome measure throughout all PDSA cycles. Doctors were also assessed for improvement in their knowledge of safety rules and their perception of the electronic handover tool. An electronic handover tool complementing daily clinical practice can be successfully implemented using solutions devised through close collaboration with end-users supported by the senior leadership. A combined 'bottom-up' and 'top-down' approach with regular process evaluations is crucial for its long-term sustainability. © The Author 2016. Published by Oxford University Press in association with the International Society for Quality in Health Care. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

29 CFR 500.131 - Exclusion from housing safety and health requirement.

Code of Federal Regulations, 2010 CFR

2010-07-01

... OF LABOR REGULATIONS MIGRANT AND SEASONAL AGRICULTURAL WORKER PROTECTION Motor Vehicle Safety and Insurance for Transportation of Migrant and Seasonal Agricultural Workers, Housing Safety and Health for Migrant Workers Housing Safety and Health § 500.131 Exclusion from housing safety and health requirement...

45 CFR 162.510 - Full implementation requirements: Covered entities.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 45 Public Welfare 1 2013-10-01 2013-10-01 false Full implementation requirements: Covered entities. 162.510 Section 162.510 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES ADMINISTRATIVE DATA... Plans § 162.510 Full implementation requirements: Covered entities. (a) A covered entity must use an...

A study of Michigan safety belt use prior to implementation of standard enforcement

DOT National Transportation Integrated Search

2000-02-01

Reported here are the results of a direct observation survey of safety belt use conducted in January 2000 to provide a baseline rate from which to measure safety belt use trends following the implementation of standard enforcement in Michigan. In thi...

Beyond usability: designing effective technology implementation systems to promote patient safety.

PubMed

Karsh, B-T

2004-10-01

Evidence is emerging that certain technologies such as computerized provider order entry may reduce the likelihood of patient harm. However, many technologies that should reduce medical errors have been abandoned because of problems with their design, their impact on workflow, and general dissatisfaction with them by end users. Patient safety researchers have therefore looked to human factors engineering for guidance on how to design technologies to be usable (easy to use) and useful (improving job performance, efficiency, and/or quality). While this is a necessary step towards improving the likelihood of end user satisfaction, it is still not sufficient. Human factors engineering research has shown that the manner in which technologies are implemented also needs to be designed carefully if benefits are to be realized. This paper reviews the theoretical knowledge on what leads to successful technology implementation and how this can be translated into specifically designed processes for successful technology change. The literature on diffusion of innovations, technology acceptance, organisational justice, participative decision making, and organisational change is reviewed and strategies for promoting successful implementation are provided. Given the rapid and ever increasing pace of technology implementation in health care, it is critical for the science of technology implementation to be understood and incorporated into efforts to improve patient safety.

Implementation of safety checklists in surgery: a realist synthesis of evidence.

PubMed

Gillespie, Brigid M; Marshall, Andrea

2015-09-28

The aim of this review is to present a realist synthesis of the evidence of implementation interventions to improve adherence to the use of safety checklists in surgery. Surgical safety checklists have been shown to improve teamwork and patient safety in the operating room. Yet, despite the benefits associated with their use, universal implementation of and compliance with these checklists has been inconsistent. An overview of the literature from 2008 is examined in relation to checklist implementation, compliance, and sustainability. Pawson's and Rycroft-Malone's realist synthesis methodology was used to explain the interaction between context, mechanism, and outcome. This approach incorporated the following: defining the scope of the review, searching and appraising the evidence, extracting and synthesising the findings, and disseminating, implementing, and evaluating the evidence. We identified two theories a priori that explained contextual nuances associated with implementation and evaluation of checklists in surgery: the Normalisation Process Theory and Responsive Regulation Theory. We identified four a priori propositions: (1) Checklist protocols that are prospectively tailored to the context are more likely to be used and sustained in practice, (2) Fidelity and sustainability is increased when checklist protocols can be seamlessly integrated into daily professional practice, (3) Routine embedding of checklist protocols in practice is influenced by factors that promote or inhibit clinicians' participation, and (4) Regulation reinforcement mechanisms that are more contextually responsive should lead to greater compliance in using checklist protocols. The final explanatory model suggests that the sustained use of surgical checklists is discipline-specific and is more likely to occur when medical staff are actively engaged and leading the process of implementation. Involving clinicians in tailoring the checklist to better fit their context of practice and

Software Dependability and Safety Evaluations ESA's Initiative

NASA Astrophysics Data System (ADS)

Hernek, M.

ESA has allocated funds for an initiative to evaluate Dependability and Safety methods of Software. The objectives of this initiative are; · More extensive validation of Safety and Dependability techniques for Software · Provide valuable results to improve the quality of the Software thus promoting the application of Dependability and Safety methods and techniques. ESA space systems are being developed according to defined PA requirement specifications. These requirements may be implemented through various design concepts, e.g. redundancy, diversity etc. varying from project to project. Analysis methods (FMECA. FTA, HA, etc) are frequently used during requirements analysis and design activities to assure the correct implementation of system PA requirements. The criticality level of failures, functions and systems is determined and by doing that the critical sub-systems are identified, on which dependability and safety techniques are to be applied during development. Proper performance of the software development requires the development of a technical specification for the products at the beginning of the life cycle. Such technical specification comprises both functional and non-functional requirements. These non-functional requirements address characteristics of the product such as quality, dependability, safety and maintainability. Software in space systems is more and more used in critical functions. Also the trend towards more frequent use of COTS and reusable components pose new difficulties in terms of assuring reliable and safe systems. Because of this, its dependability and safety must be carefully analysed. ESA identified and documented techniques, methods and procedures to ensure that software dependability and safety requirements are specified and taken into account during the design and development of a software system and to verify/validate that the implemented software systems comply with these requirements [R1].

45 CFR 98.41 - Health and safety requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 45 Public Welfare 1 2011-10-01 2011-10-01 false Health and safety requirements. 98.41 Section 98.41 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION CHILD CARE AND DEVELOPMENT FUND Program Operations (Child Care Services)-Lead Agency and Provider Requirements § 98.41 Health...

45 CFR 98.41 - Health and safety requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 45 Public Welfare 1 2012-10-01 2012-10-01 false Health and safety requirements. 98.41 Section 98.41 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION CHILD CARE AND DEVELOPMENT FUND Program Operations (Child Care Services)-Lead Agency and Provider Requirements § 98.41 Health...

45 CFR 98.41 - Health and safety requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 45 Public Welfare 1 2013-10-01 2013-10-01 false Health and safety requirements. 98.41 Section 98.41 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION CHILD CARE AND DEVELOPMENT FUND Program Operations (Child Care Services)-Lead Agency and Provider Requirements § 98.41 Health...

45 CFR 98.41 - Health and safety requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Health and safety requirements. 98.41 Section 98.41 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION CHILD CARE AND DEVELOPMENT FUND Program Operations (Child Care Services)-Lead Agency and Provider Requirements § 98.41 Health...

45 CFR 98.41 - Health and safety requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 1 2014-10-01 2014-10-01 false Health and safety requirements. 98.41 Section 98.41 Public Welfare Department of Health and Human Services GENERAL ADMINISTRATION CHILD CARE AND DEVELOPMENT FUND Program Operations (Child Care Services)-Lead Agency and Provider Requirements § 98.41 Health...

Design and implementation of an identification system in construction site safety for proactive accident prevention.

PubMed

Yang, Huanjia; Chew, David A S; Wu, Weiwei; Zhou, Zhipeng; Li, Qiming

2012-09-01

Identifying accident precursors using real-time identity information has great potential to improve safety performance in construction industry, which is still suffering from day to day records of accident fatality and injury. Based on the requirements analysis for identifying precursor and the discussion of enabling technology solutions for acquiring and sharing real-time automatic identification information on construction site, this paper proposes an identification system design for proactive accident prevention to improve construction site safety. Firstly, a case study is conducted to analyze the automatic identification requirements for identifying accident precursors in construction site. Results show that it mainly consists of three aspects, namely access control, training and inspection information and operation authority. The system is then designed to fulfill these requirements based on ZigBee enabled wireless sensor network (WSN), radio frequency identification (RFID) technology and an integrated ZigBee RFID sensor network structure. At the same time, an information database is also designed and implemented, which includes 15 tables, 54 queries and several reports and forms. In the end, a demonstration system based on the proposed system design is developed as a proof of concept prototype. The contributions of this study include the requirement analysis and technical design of a real-time identity information tracking solution for proactive accident prevention on construction sites. The technical solution proposed in this paper has a significant importance in improving safety performance on construction sites. Moreover, this study can serve as a reference design for future system integrations where more functions, such as environment monitoring and location tracking, can be added. Copyright © 2011 Elsevier Ltd. All rights reserved.

Evaluation of a countrywide implementation of the world health organisation surgical safety checklist in Madagascar.

PubMed

White, Michelle C; Baxter, Linden S; Close, Kristin L; Ravelojaona, Vaonandianina A; Rakotoarison, Hasiniaina N; Bruno, Emily; Herbert, Alison; Andean, Vanessa; Callahan, James; Andriamanjato, Hery H; Shrime, Mark G

2018-01-01

The 2009 World Health Organisation (WHO) surgical safety checklist significantly reduces surgical mortality and morbidity (up to 47%). Yet in 2016, only 25% of East African anesthetists regularly use the checklist. Nationwide implementation of the checklist is reported in high-income countries, but in low- and middle-income countries (LMICs) reports of successful implementations are sparse, limited to single institutions and require intensive support. Since checklist use leads to the biggest improvements in outcomes in LMICs, methods of wide-scale implementation are needed. We hypothesized that, using a three-day course, successful wide-scale implementation of the checklist could be achieved, as measured by at least 50% compliance with six basic safety processes at three to four months. We also aimed to determine predictors for checklist utilization. Using a blended educational implementation strategy based on prior pilot studies we designed a three-day dynamic educational course to facilitate widespread implementation of the WHO checklist. The course utilized lectures, film, small group breakouts, participant feedback and simulation to teach the knowledge, skills and behavior changes needed to implement the checklist. In collaboration with the Ministry of Health and local hospital leadership, the course was delivered to 427 multi-disciplinary staff at 21 hospitals located in 19 of 22 regions of Madagascar between September 2015 and March 2016. We evaluated implementation at three to four months using questionnaires (with a 5-point Likert scale) and focus groups. Multivariate linear regression was used to test predictors of checklist utilization. At three to four months, 65% of respondents reported always using the checklist, with another 13% using it in part. Participant's years in practice, hospital size, or surgical volume did not predict checklist use. Checklist use was associated with counting instruments (p< 0.05), but not with verifying: patient identity

Design of a Conceptual Bumper Energy Absorber Coupling Pedestrian Safety and Low-Speed Impact Requirements

PubMed Central

Mo, Fuhao; Zhao, Siqi; Yu, Chuanhui; Duan, Shuyong

2018-01-01

The car front bumper system needs to meet the requirements of both pedestrian safety and low-speed impact which are somewhat contradicting. This study aims to design a new kind of modular self-adaptive energy absorber of the front bumper system which can balance the two performances. The X-shaped energy-absorbing structure was proposed which can enhance the energy absorption capacity during impact by changing its deformation mode based on the amount of external collision energy. Then, finite element simulations with a realistic vehicle bumper system are performed to demonstrate its crashworthiness in comparison with the traditional foam energy absorber, which presents a significant improvement of the two performances. Furthermore, the structural parameters of the X-shaped energy-absorbing structure including thickness (t u), side arc radius (R), and clamping boost beam thickness (t b) are analyzed using a full factorial method, and a multiobjective optimization is implemented regarding evaluation indexes of both pedestrian safety and low-speed impact. The optimal parameters are then verified, and the feasibility of the optimal results is confirmed. In conclusion, the new X-shaped energy absorber can meet both pedestrian safety and low-speed impact requirements well by altering the main deformation modes according to different impact energy levels. PMID:29581728

Design of a Conceptual Bumper Energy Absorber Coupling Pedestrian Safety and Low-Speed Impact Requirements.

PubMed

Mo, Fuhao; Zhao, Siqi; Yu, Chuanhui; Xiao, Zhi; Duan, Shuyong

2018-01-01

The car front bumper system needs to meet the requirements of both pedestrian safety and low-speed impact which are somewhat contradicting. This study aims to design a new kind of modular self-adaptive energy absorber of the front bumper system which can balance the two performances. The X-shaped energy-absorbing structure was proposed which can enhance the energy absorption capacity during impact by changing its deformation mode based on the amount of external collision energy. Then, finite element simulations with a realistic vehicle bumper system are performed to demonstrate its crashworthiness in comparison with the traditional foam energy absorber, which presents a significant improvement of the two performances. Furthermore, the structural parameters of the X-shaped energy-absorbing structure including thickness ( t u ), side arc radius ( R ), and clamping boost beam thickness ( t b ) are analyzed using a full factorial method, and a multiobjective optimization is implemented regarding evaluation indexes of both pedestrian safety and low-speed impact. The optimal parameters are then verified, and the feasibility of the optimal results is confirmed. In conclusion, the new X-shaped energy absorber can meet both pedestrian safety and low-speed impact requirements well by altering the main deformation modes according to different impact energy levels.

Narcotics reduction, quality and safety in gynecologic oncology surgery in the first year of enhanced recovery after surgery protocol implementation.

PubMed

Bergstrom, Jennifer E; Scott, Marla E; Alimi, Yewande; Yen, Ting-Tai; Hobson, Deborah; Machado, Karime K; Tanner, Edward J; Fader, Amanda N; Temkin, Sarah M; Wethington, Stephanie; Levinson, Kimberly; Sokolinsky, Sam; Lau, Brandyn; Stone, Rebecca L

2018-06-01

Enhanced Recovery After Surgery (ERAS) programs are mechanisms for achieving value-based improvements in surgery. This report provides a detailed analysis of the impact of an ERAS program on patient outcomes as well as quality and safety measures during implementation on a gynecologic oncology service at a major academic medical center. A retrospective review of gynecologic oncology patients undergoing elective laparotomy during the implementation phase of an ERAS program (January 2016 through December 2016) was performed. Patient demographics, surgical variables, postoperative outcomes, and adherence to core safety measures, including antimicrobial and venous thromboembolism (VTE) prophylaxis, were compared to a historical patient cohort (January 2015 through December 2015). Statistical analyses were performed using t-tests, Wilcoxon rank sum tests, and Chi squared tests. The inaugural 109 ERAS program participants were compared to a historical patient cohort (n=158). There was no difference in BMI, race, malignancy, or complexity of procedure between cohorts. ERAS patients required less narcotics (70.7 vs 127.4, p=0.007, oral morphine equivalents) and PCA use (32.1% vs. 50.6%, p=0.002). Despite this substantial reduction in narcotics, ERAS patients did not report more pain and in fact reported significantly less pain by postoperative day 3. There were no differences in length of stay (5days), complication rates (13.8% vs. 20.3%, p=0.17) or 30-day readmission rates (9.5 vs 11.9%, p=0.54) between ERAS and historical patients, respectively. Compliance with antimicrobial prophylaxis was 97.2%. However, 33.9% of ERAS patients received substandard preoperative VTE prophylaxis. ERAS program implementation resulted in reductions in narcotic requirements and PCA use without changes in length of stay or readmission rates. Compliance should be diligently audited during the implementation phase of ERAS programs, with special attention to adherence to pre-existing core safety

Workers' involvement--a missing component in the implementation of occupational safety and health management systems in enterprises.

PubMed

Podgórski, Daniel

2005-01-01

Effective implementation of occupational safety and health (OSH) legislation based on European Union directives requires promotion of OSH management systems (OSH MS). To this end, voluntary Polish standards (PN-N-18000) have been adopted, setting forth OSH MS specifications and guidelines. However, the number of enterprises implementing OSH MS has increased slowly, falling short of expectations, which call for a new national policy on OSH MS promotion. To develop a national policy in this area, a survey was conducted in 40 enterprises with OSH MS in place. The survey was aimed at identifying motivational factors underlying OSH MS implementation decisions. Specifically, workers' and their representatives' involvement in OSH MS implementation was investigated. The results showed that the level of workers' involvement was relatively low, which may result in a low effectiveness of those systems. The same result also applies to the involvement of workers' representatives and that of trade unions.

[Implementation of a patient safety strategy in primary care of the Community of Madrid].

PubMed

Cañada Dorado, A; Drake Canela, M; Olivera Cañadas, G; Mateos Rodilla, J; Mediavilla Herrera, I; Miquel Gómez, A

2015-01-01

This paper describes the implementation of a patient safety strategy in primary care within the new organizational and functional structure that was created in October 2010 to cover the single primary health care area of the Community of Madrid. The results obtained in Patient Safety after the implementation of this new model over the first two years of its development are also presented. Copyright © 2014 SECA. Published by Elsevier Espana. All rights reserved.

Role of a quality management system in improving patient safety - laboratory aspects.

PubMed

Allen, Lynn C

2013-09-01

The aim of this study is to describe how implementation of a quality management system (QMS) based on ISO 15189 enhances patient safety. A literature review showed that several European hospitals implemented a QMS based on ISO 9001 and assessed the impact on patient safety. An Internet search showed that problems affecting patient safety have occurred in a number of laboratories across Canada. The requirements of a QMS based on ISO 15189 are outlined, and the impact of the implementation of each requirement on patient safety is summarized. The Quality Management Program - Laboratory Services in Ontario is briefly described, and the experience of Ontario laboratories with Ontario Laboratory Accreditation, based on ISO 15189, is outlined. Several hospitals that implemented ISO 9001 reported either a positive impact or no impact on patient safety. Patient safety problems in Canadian laboratories are described. Implementation of each requirement of the QMS can be seen to have a positive effect on patient safety. Average laboratory conformance on Ontario Laboratory Accreditation is very high, and laboratories must address and resolve any nonconformities. Other standards, practices, and quality requirements may also contribute to patient safety. Implementation of a QMS based on ISO 15189 provides a solid foundation for quality in the laboratory and enhances patient safety. It helps to prevent patient safety issues; when such issues do occur, effective processes are in place for investigation and resolution. Patient safety problems in Canadian laboratories might have been prevented had effective QMSs been in place. Ontario Laboratory Accreditation has had a positive impact on quality in Ontario laboratories. Copyright © 2013 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

Electronic health records and patient safety: co-occurrence of early EHR implementation with patient safety practices in primary care settings.

PubMed

Tanner, C; Gans, D; White, J; Nath, R; Pohl, J

2015-01-01

The role of electronic health records (EHR) in enhancing patient safety, while substantiated in many studies, is still debated. This paper examines early EHR adopters in primary care to understand the extent to which EHR implementation is associated with the workflows, policies and practices that promote patient safety, as compared to practices with paper records. Early adoption is defined as those who were using EHR prior to implementation of the Meaningful Use program. We utilized the Physician Practice Patient Safety Assessment (PPPSA) to compare primary care practices with fully implemented EHR to those utilizing paper records. The PPPSA measures the extent of adoption of patient safety practices in the domains: medication management, handoffs and transition, personnel qualifications and competencies, practice management and culture, and patient communication. Data from 209 primary care practices responding between 2006-2010 were included in the analysis: 117 practices used paper medical records and 92 used an EHR. Results showed that, within all domains, EHR settings showed significantly higher rates of having workflows, policies and practices that promote patient safety than paper record settings. While these results were expected in the area of medication management, EHR use was also associated with adoption of patient safety practices in areas in which the researchers had no a priori expectations of association. Sociotechnical models of EHR use point to complex interactions between technology and other aspects of the environment related to human resources, workflow, policy, culture, among others. This study identifies that among primary care practices in the national PPPSA database, having an EHR was strongly empirically associated with the workflow, policy, communication and cultural practices recommended for safe patient care in ambulatory settings.

Information system equality for food security--implementation of the food safety control system in Taiwan.

PubMed

Chen, Shaun C; Hsu, Guoo-Shyng Wang; Chiu, Chihwei P

2009-01-01

Food security plays a central role in governing agricultural policies in Taiwan. In addition to overuse or the illegal use of pesticide, meat leanness promoters, animal drugs and melamine in the food supply; as well as foodborne illness draws the greatest public concern due to incidents that occur every year in Taiwan. The present report demonstrates the implementation of a food safety control system in Taiwan. In order to control foodborne outbreaks effectively, the central government of the Department of Health of Taiwan launched the food safety control system which includes both the good hygienic practice (GHP) and the HACCP plan, in the last decade. From 1998 to the present, 302 food affiliations that implemented the system have been validated and accredited by a well-established audit system. The implementation of a food safety control system in compliance with international standards is of crucial importance to ensure complete safety and the high quality of foods, not only for domestic markets, but also for international trade.

An Evaluation of a Parent Implemented in Situ Pedestrian Safety Skills Intervention for Individuals with Autism

ERIC Educational Resources Information Center

Harriage, Bethany; Blair, Kwang-Sun Cho; Miltenberger, Raymond

2016-01-01

This study evaluated an in situ pedestrian safety skills intervention for three individuals with autism, as implemented by their parents. Specifically, this study examined the utility of behavioral skills training (BST) in helping parents implement most-to-least prompting procedures in training their children to use pedestrian safety skills in…

Safety policy and requirements for payloads using the space transportation system

NASA Technical Reports Server (NTRS)

1989-01-01

The safety policy and requirements are established applicable to the Space Transportation System (STS) payloads and their ground support equipment (GSE). The requirements are intended to protect flight and ground personnel, the STS, other payloads, GSE, the general public, public-private property, and the environment from payload-related hazards. The technical and system safety requirements applicable to STS payloads (including payload-provided ground and flight supports systems) during ground and flight operations are contained.

Engineering Safety- and Security-Related Requirements for Software-Intensive Systems

DTIC Science & Technology

2010-04-27

Requirements Negative (shall not) Requirements Hardware Requirements equ remen s System / Documentation Requirements eve oper Requirements Operational ...Validation Actual / Proposed Defensibility C li Operational Vulnerability Analysis VulnerabilityVulnerability Safety Vulnerability performs System ...including suggestions for reducing this burden, to Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson

29 CFR 1960.6 - Designation of agency safety and health officials.

Code of Federal Regulations, 2010 CFR

2010-07-01

... safety and health policy and program to carry out the provisions of section 19 of the Act, Executive... implementation of the agency policy and program as required by section 19 of the Act, Executive Order 12196, and... safety and health staff, equipment, materials, and training required to ensure implementation of an...

42 CFR 3.210 - Required disclosure of patient safety work product to the Secretary.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Required disclosure of patient safety work product... HUMAN SERVICES GENERAL PROVISIONS PATIENT SAFETY ORGANIZATIONS AND PATIENT SAFETY WORK PRODUCT Confidentiality and Privilege Protections of Patient Safety Work Product § 3.210 Required disclosure of patient...

Database management systems for process safety.

PubMed

Early, William F

2006-03-17

Several elements of the process safety management regulation (PSM) require tracking and documentation of actions; process hazard analyses, management of change, process safety information, operating procedures, training, contractor safety programs, pre-startup safety reviews, incident investigations, emergency planning, and compliance audits. These elements can result in hundreds of actions annually that require actions. This tracking and documentation commonly is a failing identified in compliance audits, and is difficult to manage through action lists, spreadsheets, or other tools that are comfortably manipulated by plant personnel. This paper discusses the recent implementation of a database management system at a chemical plant and chronicles the improvements accomplished through the introduction of a customized system. The system as implemented modeled the normal plant workflows, and provided simple, recognizable user interfaces for ease of use.

Rail passenger equipment crashworthiness testing requirements and implementation

DOT National Transportation Integrated Search

2000-11-01

This paper describes the requirements and the implementation of a series of impact tests of rail passenger equipment. The test : requirements the desired measurements are dictated by the : characteristics of the vehicle, as well as uncertainties in t...

Food suppliers' perceptions and practical implementation of food safety regulations in Taiwan.

PubMed

Ko, Wen-Hwa

2015-12-01

The relationships between the perceptions and practical implementation of food safety regulations by food suppliers in Taiwan were evaluated. A questionnaire survey was used to identify individuals who were full-time employees of the food supply industry with at least 3 months of experience. Dimensions of perceptions of food safety regulations were classified using the constructs of attitude of employees and corporate concern attitude for food safety regulation. The behavior dimension was classified into employee behavior and corporate practice. Food suppliers with training in food safety were significantly better than those without training with respect to the constructs of perception dimension of employee attitude, and the constructs of employee behavior and corporate practice associated with the behavior dimension. Older employees were superior in perception and practice. Employee attitude, employee behavior, and corporate practice were significantly correlated with each other. Satisfaction with governmental management was not significantly related to corporate practice. The corporate implementation of food safety regulations by suppliers was affected by employees' attitudes and behaviors. Furthermore, employees' attitudes and behaviors explain 35.3% of corporate practice. Employee behavior mediates employees' attitudes and corporate practices. The results of this study may serve as a reference for governmental supervision and provide training guidelines for workers in the food supply industry. Copyright © 2015. Published by Elsevier B.V.

Intranet-based safety documentation in management of major hazards and occupational health and safety.

PubMed

Leino, Antti

2002-01-01

In the European Union, Council Directive 96/82/EC requires operators producing, using, or handling significant amounts of dangerous substances to improve their safety management systems in order to better manage the major accident potentials deriving from human error. A new safety management system for the Viikinmäki wastewater treatment plant in Helsinki, Finland, was implemented in this study. The system was designed to comply with both the new safety liabilities and the requirements of OHSAS 18001 (British Standards Institute, 1999). During the implementation phase experiences were gathered from the development processes in this small organisation. The complete documentation was placed in the intranet of the plant. Hyperlinks between documents were created to ensure convenience of use. Documentation was made accessible for all workers from every workstation.

NASA Expendable Launch Vehicle (ELV) Payload Safety Review Process

NASA Technical Reports Server (NTRS)

Starbus, Calvert S.; Donovan, Shawn; Dook, Mike; Palo, Tom

2007-01-01

Issues addressed by this program: (1) Complicated roles and responsibilities associated with multi-partner projects (2) Working relationships and communications between all organizations involved in the payload safety process (3) Consistent interpretation and implementation of safety requirements from one project to the rest (4) Consistent implementation of the Tailoring Process (5) Clearly defined NASA decision-making-authority (6) Bring Agency-wide perspective to each ElV payload project. Current process requires a Payload Safety Working Group (PSWG) for eac payload with representatives from all involved organizations.

Development of photovoltaic array and module safety requirements

NASA Technical Reports Server (NTRS)

1982-01-01

Safety requirements for photovoltaic module and panel designs and configurations likely to be used in residential, intermediate, and large-scale applications were identified and developed. The National Electrical Code and Building Codes were reviewed with respect to present provisions which may be considered to affect the design of photovoltaic modules. Limited testing, primarily in the roof fire resistance field was conducted. Additional studies and further investigations led to the development of a proposed standard for safety for flat-plate photovoltaic modules and panels. Additional work covered the initial investigation of conceptual approaches and temporary deployment, for concept verification purposes, of a differential dc ground-fault detection circuit suitable as a part of a photovoltaic array safety system.

Evolution of safety-critical requirements post-launch

NASA Technical Reports Server (NTRS)

Lutz, R. R.; Mikulski, I. C.

2001-01-01

This paper reports the results of a small study of requirements changes to the onboard software of three spacecraft subsequent to launch. Only those requirement changes that resulted from post-launch anoma-lies (i.e., during operations) were of interest here, since the goal was to better understand the relation-ship between critical anomalies during operations and how safety-critical requirements evolve. The results of the study were surprising in that anomaly-driven, post-launch requirements changes were rarely due to previous requirements having been incorrect. Instead, changes involved new requirements (1) for the software to handle rare events or (2) for the software to compensate for hardware failures or limitations. The prevalence of new requirements as a result of post-launch anomalies suggests a need for increased requirements-engineering support of maintenance activities in these systems. The results also confirm both the difficulty and the benefits of pursuing requirements completeness, especially in terms of fault tolerance, during development of critical systems.

Radioisotope Power System Delivery, Ground Support and Nuclear Safety Implementation: Use of the Multi-Mission Radioisotope Thermoelectric Generator for the NASA's Mars Science Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

S.G. Johnson; K.L. Lively; C.C. Dwight

Radioisotope power systems have been used for over 50 years to enable missions in remote or hostile environments. They are a convenient means of supplying a few milliwatts up to a few hundred watts of useable, long-term electrical power. With regard to use of a radioisotope power system, the transportation, ground support and implementation of nuclear safety protocols in the field is a complex process that requires clear identification of needed technical and regulatory requirements. The appropriate care must be taken to provide high quality treatment of the item to be moved so it arrives in a condition to fulfillmore » its missions in space. Similarly it must be transported and managed in a manner compliant with requirements for shipment and handling of special nuclear material. This presentation describes transportation, ground support operations and implementation of nuclear safety and security protocols for a radioisotope power system using recent experience involving the Multi-Mission Radioisotope Thermoelectric Generator for National Aeronautics and Space Administration’s Mars Science Laboratory, which launched in November of 2011.« less

Infrastructure State Implementation Plan (SIP) Requirements and Guidance

EPA Pesticide Factsheets

The Clean Air Act requires states to submit SIPs that implement, maintain, and enforce a new or revised national ambient air quality standard (NAAQS) within 3 years of EPA issuing the standard. The Infrastructure SIP is required for all states.

[Implementation of a safety and health planning system in a teaching hospital].

PubMed

Mariani, F; Bravi, C; Dolcetti, L; Moretto, A; Palermo, A; Ronchin, M; Tonelli, F; Carrer, P

2007-01-01

University Hospital "L. Sacco" had started in 2006 a two-year project in order to set up a "Health and Safety Management System (HSMS)" referring to the technical guideline OHSAS 18001:1999 and the UNI and INAIL "Guidelines for a health and safety management system at workplace". So far, the following operations had been implemented: Setting up of a specific Commission within the Risk Management Committee; Identification and appointment of Departmental Representatives of HSMS; Carrying out of a training course addressed to Workers Representatives for Safety and Departmental Representatives of HSMS; Development of an Integrated Informative System for Prevention and Safety; Auditors qualification; Inspection of the Occupational Health Unit and the Prevention and Safety Service: reporting of critical situations and monitoring solutions adopted. Short term objectives are: Self-evaluation through check-lists of each department; Sharing of the Improvement Plan among the departments of the hospital; Planning of Health and Safety training activities in the framework of the Hospital Training Plan; Safety audit.

Evaluation of a countrywide implementation of the world health organisation surgical safety checklist in Madagascar

PubMed Central

White, Michelle C.; Baxter, Linden S.; Close, Kristin L.; Ravelojaona, Vaonandianina A.; Rakotoarison, Hasiniaina N.; Bruno, Emily; Herbert, Alison; Andean, Vanessa; Callahan, James; Andriamanjato, Hery H.; Shrime, Mark G.

2018-01-01

Background The 2009 World Health Organisation (WHO) surgical safety checklist significantly reduces surgical mortality and morbidity (up to 47%). Yet in 2016, only 25% of East African anesthetists regularly use the checklist. Nationwide implementation of the checklist is reported in high-income countries, but in low- and middle-income countries (LMICs) reports of successful implementations are sparse, limited to single institutions and require intensive support. Since checklist use leads to the biggest improvements in outcomes in LMICs, methods of wide-scale implementation are needed. We hypothesized that, using a three-day course, successful wide-scale implementation of the checklist could be achieved, as measured by at least 50% compliance with six basic safety processes at three to four months. We also aimed to determine predictors for checklist utilization. Materials and methods Using a blended educational implementation strategy based on prior pilot studies we designed a three-day dynamic educational course to facilitate widespread implementation of the WHO checklist. The course utilized lectures, film, small group breakouts, participant feedback and simulation to teach the knowledge, skills and behavior changes needed to implement the checklist. In collaboration with the Ministry of Health and local hospital leadership, the course was delivered to 427 multi-disciplinary staff at 21 hospitals located in 19 of 22 regions of Madagascar between September 2015 and March 2016. We evaluated implementation at three to four months using questionnaires (with a 5-point Likert scale) and focus groups. Multivariate linear regression was used to test predictors of checklist utilization. Results At three to four months, 65% of respondents reported always using the checklist, with another 13% using it in part. Participant’s years in practice, hospital size, or surgical volume did not predict checklist use. Checklist use was associated with counting instruments (p< 0

30 CFR 250.806 - Safety and pollution prevention equipment quality assurance requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 2 2011-07-01 2011-07-01 false Safety and pollution prevention equipment... pollution prevention equipment quality assurance requirements. (a) General requirements. (1) Except as provided in paragraph (b)(1) of this section, you may install only certified safety and pollution...

Generation III reactors safety requirements and the design solutions

NASA Astrophysics Data System (ADS)

Felten, P.

2009-03-01

Nuclear energy's public acceptance, and hence its development, depends on its safety. As a reactor designer, we will first briefly remind the basic safety principles of nuclear reactors' design. We will then show how the industry, and in particular Areva with its EPR, made design evolution in the wake of the Three Miles Island accident in 1979. In particular, for this new generation of reactors, severe accidents are taken into account beyond the standard design basis accidents. Today, Areva's EPR meets all so-called "generation III" safety requirements and was licensed by several nuclear safety authorities in the world. Many innovative solutions are integrated in the EPR, some of which will be introduced here.

DARHT: INTEGRATION OF AUTHORIZATION BASIS REQUIREMENTS AND WORKER SAFETY

DOE Office of Scientific and Technical Information (OSTI.GOV)

D. A. MC CLURE; C. A. NELSON; R. L. BOUDRIE

2001-04-01

This document describes the results of consensus agreements reached by the DARHT Safety Planning Team during the development of the update of the DARHT Safety Analysis Document (SAD). The SAD is one of the Authorization Basis (AB) Documents required by the Department prior to granting approval to operate the DARHT Facility. The DARHT Safety Planning Team is lead by Mr. Joel A. Baca of the Department of Energy Albuquerque Operations Office (DOE/AL). Team membership is drawn from the Department of Energy Albuquerque Operations Office, the Department of Energy Los Alamos Area Office (DOE/LAAO), and several divisions of the Los Alamosmore » National Laboratory. Revision 1 of the DARHT SAD had been written as part of the process for gaining approval to operate the Phase 1 (First Axis) Accelerator. Early in the planning stage for the required update of the SAD for the approval to operate both Phase 1 and Phase 2 (First Axis and Second Axis) DARHT Accelerator, it was discovered that a conflict existed between the Laboratory approach to describing the management of facility and worker safety.« less

33 CFR 157.12b - Implementation requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... OIL IN BULK Design, Equipment, and Installation § 157.12b Implementation requirements. Oil discharge monitoring and control systems must be fitted to oil tankers to which this subpart applies. A monitoring and...

33 CFR 157.12b - Implementation requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... OIL IN BULK Design, Equipment, and Installation § 157.12b Implementation requirements. Oil discharge monitoring and control systems must be fitted to oil tankers to which this subpart applies. A monitoring and...

33 CFR 157.12b - Implementation requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... OIL IN BULK Design, Equipment, and Installation § 157.12b Implementation requirements. Oil discharge monitoring and control systems must be fitted to oil tankers to which this subpart applies. A monitoring and...

33 CFR 157.12b - Implementation requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... OIL IN BULK Design, Equipment, and Installation § 157.12b Implementation requirements. Oil discharge monitoring and control systems must be fitted to oil tankers to which this subpart applies. A monitoring and...

33 CFR 157.12b - Implementation requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... OIL IN BULK Design, Equipment, and Installation § 157.12b Implementation requirements. Oil discharge monitoring and control systems must be fitted to oil tankers to which this subpart applies. A monitoring and...

Analysis respons to the implementation of nuclear installations safety culture using AHP-TOPSIS

NASA Astrophysics Data System (ADS)

Situmorang, J.; Kuntoro, I.; Santoso, S.; Subekti, M.; Sunaryo, G. R.

2018-02-01

An analysis of responses to the implementation of nuclear installations safety culture has been done using AHP (Analitic Hierarchy Process) - TOPSIS (Technique for Order of Preference by Similarity to Ideal Solution). Safety culture is considered as collective commitments of the decision-making level, management level, and individual level. Thus each level will provide a subjective perspective as an alternative approach to implementation. Furthermore safety culture is considered by the statement of five characteristics which in more detail form consist of 37 attributes, and therefore can be expressed as multi-attribute state. Those characteristics and or attributes will be a criterion and its value is difficult to determine. Those criteria of course, will determine and strongly influence the implementation of the corresponding safety culture. To determine the pattern and magnitude of the influence is done by using a TOPSIS that is based on decision matrix approach and is composed of alternatives and criteria. The weight of each criterion is determined by AHP technique. The data used are data collected through questionnaires at the workshop on safety and health in 2015. .Reliability test of data gives Cronbah Alpha value of 95.5% which according to the criteria is stated reliable. Validity test using bivariate correlation analysis technique between each attribute give Pearson correlation for all attribute is significant at level 0,01. Using confirmatory factor analysis gives Kaise-Meyer-Olkin of sampling Adequacy (KMO) is 0.719 and it is greater than the acceptance criterion 0.5 as well as the 0.000 significance level much smaller than 0.05 and stated that further analysis could be performed. As a result of the analysis it is found that responses from the level of decision maker (second echelon) dominate the best order preference rank to be the best solution in strengthening the nuclear installation safety culture, except for the first characteristics, safety is a

Modeling safety requirements of an FMS using Petri-nets

NASA Astrophysics Data System (ADS)

Hanna, Moheb M.; Buck, A. A.; Smith, R.

1993-08-01

This paper is concerned with the modelling of safety requirements using Petri nets as a tool to model and simulate a Flexible Manufacturing System (FMS). The FMS cell described comprises a pick and place robot, a multi-head drilling machine together with a vision system and illustrates how the hierarchical structure of Petri nets can be used to ensure that all fail- safe requirements are satisfied; block diagrams together with fully detailed example Petri nets are given. The work demonstrates the use of cell and robot control Petro nets together with robot subnets for the x, y and z axes and associated output nets; the control and output nets are linked together with a safety net. Individual machines are linked with the control and safety nets of an FMS at cell level. The paper also illustrates how a Petri net can act as a decision maker during image inspection and identifies the unsafe conditions that can arise within an FMS.

An interagency space nuclear propulsion safety policy for SEI - Issues and discussion

NASA Technical Reports Server (NTRS)

Marshall, A. C.; Sawyer, J. C., Jr.

1991-01-01

An interagency Nuclear Safety Policy Working Group (NSPWG) was chartered to recommend nuclear safety policy, requirements, and guidelines for the Space Exploration Initiative nuclear propulsion program to facilitate the implementation of mission planning and conceptual design studies. The NSPWG developed a top level policy to provide the guiding principles for the development and implementation of the nuclear propulsion safety program and the development of Safety Functional Requirements. In addition, the NSPWG reviewed safety issues for nuclear propulsion and recommended top level safety requirements and guidelines to address these issues. Safety topics include reactor start-up, inadvertent criticality, radiological release and exposure, disposal, entry, safeguards, risk/reliability, operational safety, ground testing, and other considerations. In this paper the emphasis is placed on the safety policy and the issues and considerations that are addressed by the NSPWG recommendations.

Behavioral Emergency Response Team: Implementation Improves Patient Safety, Staff Safety, and Staff Collaboration.

PubMed

Zicko, Cdr Jennifer M; Schroeder, Lcdr Rebecca A; Byers, Cdr William S; Taylor, Lt Adam M; Spence, Cdr Dennis L

2017-10-01

Staff members working on our nonmental health (non-MH) units (i.e., medical-surgical [MS] units) were not educated in recognizing or deescalating behavioral emergencies. Published evidence suggests a behavioral emergency response team (BERT) composed of MH experts who assist with deescalating behavioral emergencies may be beneficial in these situations. Therefore, we sought to implement a BERT on the inpatient non-MH units at our military treatment facility. The objectives of this evidence-based practice process improvement project were to determine how implementation of a BERT affects staff and patient safety and to examine nursing staffs' level of knowledge, confidence, and support in caring for psychiatric patients and patients exhibiting behavioral emergencies. A BERT was piloted on one MS unit for 5 months and expanded to two additional units for 3 months. Pre- and postimplementation staff surveys were conducted, and the number of staff assaults and injuries, restraint usage, and security intervention were compared. The BERT responded to 17 behavioral emergencies. The number of assaults decreased from 10 (pre) to 1 (post); security intervention decreased from 14 to 1; and restraint use decreased from 8 to 1. MS staffs' level of BERT knowledge and rating of support between MH staff and their staff significantly increased. Both MS and MH nurses rated the BERT as supportive and effective. A BERT can assist with deescalating behavioral emergencies, and improve staff collaboration and patient and staff safety. © 2017 Sigma Theta Tau International.

76 FR 10295 - Implementing a Nationwide, Broadband, Interoperable Public Safety Network in the 700 MHz Band

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-24

... Docket 07-100; FCC 11-6] Implementing a Nationwide, Broadband, Interoperable Public Safety Network in the... framework for the nationwide public safety broadband network. This document considers and proposes... broadband networks operating in the 700 MHz band. This document addresses public safety broadband network...

14 CFR 382.115 - What requirements apply to on-board safety briefings?

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false What requirements apply to on-board safety briefings? 382.115 Section 382.115 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF... TRAVEL Services on Aircraft § 382.115 What requirements apply to on-board safety briefings? As a carrier...

14 CFR 382.115 - What requirements apply to on-board safety briefings?

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false What requirements apply to on-board safety briefings? 382.115 Section 382.115 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF... TRAVEL Services on Aircraft § 382.115 What requirements apply to on-board safety briefings? As a carrier...

14 CFR 382.115 - What requirements apply to on-board safety briefings?

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 4 2014-01-01 2014-01-01 false What requirements apply to on-board safety briefings? 382.115 Section 382.115 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF... TRAVEL Services on Aircraft § 382.115 What requirements apply to on-board safety briefings? As a carrier...

14 CFR 382.115 - What requirements apply to on-board safety briefings?

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 4 2013-01-01 2013-01-01 false What requirements apply to on-board safety briefings? 382.115 Section 382.115 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF... TRAVEL Services on Aircraft § 382.115 What requirements apply to on-board safety briefings? As a carrier...

14 CFR 382.115 - What requirements apply to on-board safety briefings?

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 4 2012-01-01 2012-01-01 false What requirements apply to on-board safety briefings? 382.115 Section 382.115 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF... TRAVEL Services on Aircraft § 382.115 What requirements apply to on-board safety briefings? As a carrier...

Meeting the requirements of importing countries: practice and policy for on-farm approaches to food safety.

PubMed

Dagg, P J; Butler, R J; Murray, J G; Biddle, R R

2006-08-01

In light of the increasing consumer demand for safe, high-quality food and recent public health concerns about food-borne illness, governments and agricultural industries are under pressure to provide comprehensive food safety policies and programmes consistent with international best practice. Countries that export food commodities derived from livestock must meet both the requirements of the importing country and domestic standards. It is internationally accepted that end-product quality control, and similar methods aimed at ensuring food safety, cannot adequately ensure the safety of the final product. To achieve an acceptable level of food safety, governments and the agricultural industry must work collaboratively to provide quality assurance systems, based on sound risk management principles, throughout the food supply chain. Quality assurance systems on livestock farms, as in other parts of the food supply chain, should address food safety using hazard analysis critical control point principles. These systems should target areas including biosecurity, disease monitoring and reporting, feedstuff safety, the safe use of agricultural and veterinary chemicals, the control of potential food-borne pathogens and traceability. They should also be supported by accredited training programmes, which award certification on completion, and auditing programmes to ensure that both local and internationally recognised guidelines and standards continue to be met. This paper discusses the development of policies for on-farm food safety measures and their practical implementation in the context of quality assurance programmes, using the Australian beef industry as a case study.

[Implementation of "5S" methodology in laboratory safety and its effect on employee satisfaction].

PubMed

Dogan, Yavuz; Ozkutuk, Aydan; Dogan, Ozlem

2014-04-01

Health institutions use the accreditation process to achieve improvement across the organization and management of the health care system. An ISO 15189 quality and efficiency standard is the recommended standard for medical laboratories qualification. The "safety and accommodation conditions" of this standard covers the requirement to improve working conditions and maintain the necessary safety precautions. The most inevitable precaution for ensuring a safe environment is the creation of a clean and orderly environment to maintain a potentially safe surroundings. In this context, the 5S application which is a superior improvement tool that has been used by the industry, includes some advantages such as encouraging employees to participate in and to help increase the productivity. The main target of this study was to implement 5S methods in a clinical laboratory of a university hospital for evaluating its effect on employees' satisfaction, and correction of non-compliance in terms of the working environment. To start with, first, 5S education was given to management and employees. Secondly, a 5S team was formed and then the main steps of 5S (Seiri: Sort, Seiton: Set in order, Seiso: Shine, Seiketsu: Standardize, and Shitsuke: Systematize) were implemented for a duration of 3 months. A five-point likert scale questionnaire was used in order to determine and assess the impact of 5S on employees' satisfaction considering the areas such as facilitating the job, the job satisfaction, setting up a safe environment, and the effect of participation in management. Questionnaire form was given to 114 employees who actively worked during the 5S implementation period, and the data obtained from 63 (52.3%) participants (16 male, 47 female) were evaluated. The reliability of the questionnaire's Cronbach's alpha value was determined as 0.858 (p< 0.001). After the implementation of 5S it was observed and determined that facilitating the job and setting up a safe environment created

12 CFR Appendix A to Part 1720 - Policy Guidance; Minimum Safety and Soundness Requirements

Code of Federal Regulations, 2010 CFR

2010-01-01

..., DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT SAFETY AND SOUNDNESS SAFETY AND SOUNDNESS Pt. 1720, App. A... effectively and to model the effect of differing interest rate scenarios on the Enterprise's financial... are implemented effectively, and that the Enterprise's organization structure and assignment of...

76 FR 51271 - Implementing a Nationwide, Broadband, Interoperable Public Safety Network in the 700 MHz Band

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-18

... Docket 07-100; FCC 11-6] Implementing a Nationwide, Broadband, Interoperable Public Safety Network in the... interoperable public safety broadband network. The establishment of a common air interface for 700 MHz public safety broadband networks will create a foundation for interoperability and provide a clear path for the...

Rural hospital information technology implementation for safety and quality improvement: lessons learned.

PubMed

Tietze, Mari F; Williams, Josie; Galimbertti, Marisa

2009-01-01

This grant involved a hospital collaborative for excellence using information technology over 3-year period. The project activities focused on the improvement of patient care safety and quality in Southern rural and small community hospitals through the use of technology and education. The technology component of the design involved the implementation of a Web-based business analytic tool that allows hospitals to view data, create reports, and analyze their safety and quality data. Through a preimplementation and postimplementation comparative design, the focus of the implementation team was twofold: to recruit participant hospitals and to implement the technology at each of the 66 hospital sites. Rural hospitals were defined as acute care hospitals located in a county with a population of less than 100 000 or a state-administered Critical Access Hospital, making the total study population target 188 hospitals. Lessons learned during the information technology implementation of these hospitals are reflective of the unique culture, financial characteristics, organizational structure, and technology architecture of rural hospitals. Specific steps such as recruitment, information technology assessment, conference calls for project planning, data file extraction and transfer, technology training, use of e-mail, use of telephones, personnel management, and engaging information technology vendors were found to vary greatly among hospitals.

Implementation Guidelines for State Safety Oversight of Rail Fixed Guideway Systems

DOT National Transportation Integrated Search

1996-06-01

These guidelines will assist states, oversight agencies, and rail transit agencies in developing safety and security programs to satisfy the requirements of the Federal Transit Administration (FTA). These requirements were published in the Federal Re...

Steps to Ensure a Successful Implementation of Occupational Health and Safety Interventions at an Organizational Level

PubMed Central

Herrera-Sánchez, Isabel M.; León-Pérez, José M.; León-Rubio, José M.

2017-01-01

There is increasing meta-analytic evidence that addresses the positive impact of evidence-based occupational health and safety interventions on employee health and well-being. However, such evidence is less clear when interventions are approached at an organizational level and are aimed at changing organizational policies and processes. Given that occupational health and safety interventions are usually tailored to specific organizational contexts, generalizing and transferring such interventions to other organizations is a complex endeavor. In response, several authors have argued that an evaluation of the implementation process is crucial for assessing the intervention’s effectiveness and for understanding how and why the intervention has been (un)successful. Thus, this paper focuses on the implementation process and attempts to move this field forward by identifying the main factors that contribute toward ensuring a greater success of occupational health and safety interventions conducted at the organizational level. In doing so, we propose some steps that can guide a successful implementation. These implementation steps are illustrated using examples of evidence-based best practices reported in the literature that have described and systematically evaluated the implementation process behind their interventions during the last decade. PMID:29375413

49 CFR 1106.3 - Actions for which Safety Integration Plan is required.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 8 2010-10-01 2010-10-01 false Actions for which Safety Integration Plan is... TRANSPORTATION BOARD CONSIDERATION OF SAFETY INTEGRATION PLANS IN CASES INVOLVING RAILROAD CONSOLIDATIONS, MERGERS, AND ACQUISITIONS OF CONTROL § 1106.3 Actions for which Safety Integration Plan is required. A SIP...

Improvement in safety monitoring of biologic response modifiers after the implementation of clinical care guidelines by a specialty.

PubMed

Hanson, Rebekah L; Gannon, Michael J; Khamo, Nehrin; Sodhi, Monsheel; Orr, Alexander M; Stubbings, JoAnn

2013-01-01

Tumor necrosis factor (TNF)-alpha inhibitors and other biologic response modifiers (BRMs) are frequently used to treat a variety of inflammatory diseases. Use of these agents may increase risk of serious infections, malignancies, and other complications such as worsening symptoms of heart failure or demyelinating disease. Because of these risks, a baseline assessment and routine monitoring have been recommended, but standardized guidelines for monitoring have yet to be established. To measure the compliance with the recommended safety monitoring in the Clinical Care Guidelines for BRMs at the University of Illinois Hospitals and Health Sciences System (UI Health). The Clinical Care Guidelines for BRMs was developed by a committee of pharmacists, nurses, and physicians based on an assessment of published literature and medication labeling. The guidelines included recommendations for safety monitoring prior to BRM therapy, such as the tuberculosis (TB) test, Hepatitis B surface Antigen (HBsAg) test, liver function test (LFT), complete blood count (CBC), up-to-date vaccinations, risk assessment for cancer, pregnancy testing, monitoring for contraindications with concomitant medications, concomitant disease state risk assessment, and patient education. The guidelines were introduced to UI Health in February 2012 by a systemwide email and by in-services given by the health system's Specialty Pharmacy Service. In-services were given in the clinics known to generate large numbers of BRM orders (e.g., gastroenterology and rheumatology) and at the outpatient center for infused therapies. The purpose of the in-services was to introduce providers to the guidelines and encourage their compliance. To ensure that guideline requirements were met when BRMs were ordered, a process was established to identify BRM orders, assess the orders for compliance with 4 of the safety monitoring tests from the guidelines (TB, HBsAg, LFT, and CBC), and make interventions. When necessary

Development, implementation and evaluation of a pedestrian safety zone for elderly pedestrians

DOT National Transportation Integrated Search

1998-02-01

The objectives of this study were to develop and apply procedures for defining pedestrian safety zones for the older (age 65+) adult and to develop, implement and evaluate a countermeasure program in the defined zones. Zone definition procedures were...

Microgravity Experiments Safety and Integration Requirements Document Tree

NASA Technical Reports Server (NTRS)

Hogan, Jean M.

1995-01-01

This report is a document tree of the safety and integration documents required to develop a space experiment. Pertinent document information for each of the top level (tier one) safety and integration documents, and their applicable and reference (tier two) documents has been identified. This information includes: document title, revision level, configuration management, electronic availability, listed applicable and reference documents, source for obtaining the document, and document owner. One of the main conclusions of this report is that no single document tree exists for all safety and integration documents, regardless of the Shuttle carrier. This document also identifies the need for a single point of contact for customers wishing to access documents. The data in this report serves as a valuable information source for the NASA Lewis Research Center Project Documentation Center, as well as for all developers of space experiments.

Evaluating the implementation of health and safety innovations under a regulatory context: a collective case study of Ontario's safer needle regulation.

PubMed

Chambers, Andrea; Mustard, Cameron A; Breslin, Curtis; Holness, Linn; Nichol, Kathryn

2013-01-22

Implementation effectiveness models have identified important factors that can promote the successful implementation of an innovation; however, these models have been examined within contexts where innovations are adopted voluntarily and often ignore the socio-political and environmental context. In the field of occupational health and safety, there are circumstances where organizations must adopt innovations to comply with a regulatory standard. Examining how the external environment can facilitate or challenge an organization's change process may add to our understanding of implementation effectiveness. The objective of this study is to describe implementation facilitators and barriers in the context of a regulation designed to promote the uptake of safer engineered medical devices in healthcare. The proposed study will focus on Ontario's safer needle regulation (2007) which requires healthcare organizations to transition to the use of safer engineered medical devices for the prevention of needlestick injuries. A collective case study design will be used to learn from the experiences of three acute care hospitals in the province of Ontario, Canada. Interviews with management and front-line healthcare workers and analysis of supporting documents will be used to describe the implementation experience and examine issues associated with the integration of these devices. The data collection and analysis process will be influenced by a conceptual framework that draws from implementation science and the occupational health and safety literature. The focus of this study in addition to the methodology creates a unique opportunity to contribute to the field of implementation science. First, the study will explore implementation experiences under circumstances where regulatory pressures are influencing the organization's change process. Second, the timing of this study provides an opportunity to focus on issues that arise during later stages of implementation, a phase

SafetyAnalyst Testing and Implementation

DOT National Transportation Integrated Search

2009-03-01

SafetyAnalyst is a software tool developed by the Federal Highway Administration to assist state and local transportation agencies on analyzing safety data and managing their roadway safety programs. This research report documents the major tasks acc...

Practical implementation of good practice in health, environment and safety management in enterprise in the Lodz region.

PubMed

Michalak, Jacek

2002-10-01

Good practice in health, environment and safety management in enterprise (GP HESME) is the process that aims at continuous improvement in health, environment and safety performance, involving all stakeholders within and outside the enterprise. The GP HESME system is intended to function at different levels: international, national, local community, and enterprise. The most important issues at the first stage of GP HESME implementation in the Lodz region are described. Also, the proposals of future activities in Lodz are presented. Practical implementation of GP HESME requires close co-operation among all stakeholders: local authorities, employers, employees, research institutions, and the state inspectorate. The WHO and the Nofer Institute of Occupational Medicine (NIOM) are initiating implementation, delivering professional consultation, education and training of stakeholders in the NIOM School of Public Health. The implementation of GP HESME in the Lodz region started in 1999 from a WHO meeting on criteria and indicators, followed by close collaboration of NIOM with the city's Department of Public Health. 'Directions of Actions for Health of Lodz Citizens' is now the city's official document that includes GP HESME as an important part of public health policy in Lodz. Several conferences were organized by NIOM together with the Professional Managers' Club, Labor Inspection, and the city's Department of Public Health to assess the most important needs of enterprises. The employers and managerial staff, who predominated among the participants, stated the need for tailored sets of indicators and economic appraisal of GP HESME activities. Special attention is paid to GP HESME in supermarkets and community-owned enterprises, e.g., a local transportation company. A special program for small- and medium-size enterprises will be the next step of GP HESME in the Lodz region. The implementation of GP HESME is possible if the efforts of local authorities; research

Person-centered endoscopy safety checklist: Development, implementation, and evaluation

PubMed Central

Dubois, Hanna; Schmidt, Peter T; Creutzfeldt, Johan; Bergenmar, Mia

2017-01-01

AIM To describe the development and implementation of a person-centered endoscopy safety checklist and to evaluate the effects of a “checklist intervention”. METHODS The checklist, based on previously published safety checklists, was developed and locally adapted, taking patient safety aspects into consideration and using a person-centered approach. This novel checklist was introduced to the staff of an endoscopy unit at a Stockholm University Hospital during half-day seminars and team training sessions. Structured observations of the endoscopy team’s performance were conducted before and after the introduction of the checklist. In addition, questionnaires focusing on patient participation, collaboration climate, and patient safety issues were collected from patients and staff. RESULTS A person-centered safety checklist was developed and introduced by a multi-professional group in the endoscopy unit. A statistically significant increase in accurate patient identity verification by the physicians was noted (from 0% at baseline to 87% after 10 mo, P < 0.001), and remained high among nurses (93% at baseline vs 96% after 10 mo, P = nonsignificant). Observations indicated that the professional staff made frequent attempts to use the checklist, but compliance was suboptimal: All items in the observed nurse-led “summaries” were included in 56% of these interactions, and physicians participated by directly facing the patient in 50% of the interactions. On the questionnaires administered to the staff, items regarding collaboration and the importance of patient participation were rated more highly after the introduction of the checklist, but this did not result in statistical significance (P = 0.07/P = 0.08). The patients rated almost all items as very high both before and after the introduction of the checklist; hence, no statistical difference was noted. CONCLUSION The intervention led to increased patient identity verification by physicians - a patient safety

Implementation of an integrated computerized prescriber order-entry system for chemotherapy in a multisite safety-net health system.

PubMed

Chung, Clement; Patel, Shital; Lee, Rosetta; Fu, Lily; Reilly, Sean; Ho, Tuyet; Lionetti, Jason; George, Michael D; Taylor, Pam

2018-03-15

The development of a computerized prescriber order-entry (CPOE) system for chemotherapy in a multisite safety-net health system and the challenges to its successful implementation are described. Before CPOE for chemotherapy was first implemented and embedded in the electronic medical record system of Harris Health System (HHS), pharmacy personnel relied on regimen-specific preprinted order sets. However, due to differences in practice styles and workflow logistics, the paper orders across the 3 facilities were mostly site specific, with varying clinical content. Many of these order sets had not been approved by the oncology subcommittee. In addition, disparities in clinical knowledge and lack of communication contributed to inconsistencies in order set development. Led by medical directors from medical oncology departments at the 3 facilities, pharmacy administrators, and information technology representatives, HHS committed resources to supporting the adoption and use of a CPOE system for chemotherapy. Five practical lessons of broad applicability have been learned: engagement of interprofessional stakeholders, optimization of workflow before CPOE implementation, requirement of verification tool for CPOE, consolidation of protocols, and commitment to ongoing training and support. Evaluation of the CPOE system demonstrated a systemwide reduction in medication errors by 75% ( p < 0.05). Satisfaction with the CPOE system varied among sites and was unchanged institutionwide 6 months after the CPOE implementation. The development and implementation of CPOE for chemotherapy at a multisite safety-net health system created opportunities to optimize patient care and reduce variations through interprofessional collaborations. Initial evaluation suggested that CPOE reduced the medication-order error rate and improved user satisfaction in 1 of 3 facilities. Copyright © 2018 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

33 CFR 150.602 - What occupational awareness training is required?

Code of Federal Regulations, 2011 CFR

2011-07-01

... safety and health, the implementation of an approved, port-specific safety and environmental management... HOMELAND SECURITY (CONTINUED) DEEPWATER PORTS DEEPWATER PORTS: OPERATIONS Workplace Safety and Health Safety and Health (general) § 150.602 What occupational awareness training is required? (a) Each...

29 CFR 500.130 - Application and scope of safety and health requirement.

Code of Federal Regulations, 2010 CFR

2010-07-01

... of the aforesaid capacities. (d) The Occupational Safety and Health Administration (OSHA) is the agency of the U.S. Department of Labor which administers the Occupational Safety and Health Act (29 U.S.C... 29 Labor 3 2010-07-01 2010-07-01 false Application and scope of safety and health requirement. 500...

30 CFR 250.459 - What are the safety requirements for drilling fluid-handling areas?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What are the safety requirements for drilling... OF THE INTERIOR OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Drilling Operations Drilling Fluid Requirements § 250.459 What are the safety requirements for...

The implementation of physical safety system in bunker of the electron beam accelerator

NASA Astrophysics Data System (ADS)

Ahmad, M. A.; Hashim, S. A.; Ahmad, A.; Leo, K. W.; Chulan, R. M.; Dalim, Y.; Baijan, A. H.; Zain, M. F.; Ros, R. C.

2017-01-01

This paper describes the implementation of physical safety system for the new low energy electron beam (EB) accelerator installed at Block 43T Nuclear Malaysia. The low energy EB is a locally designed and developed with a target energy of 300 keV. The issues on radiation protection have been addressed by the installation of radiation shielding in the form of a bunker and installation radiation monitors. Additional precaution is needed to ensure that personnel are not exposed to radiation and other physical hazards. Unintentional access to the radiation room can cause serious hazard and hence safety features must be installed to prevent such events. In this work we design and built a control and monitoring system for the shielding door. The system provides signals to the EB control panel to allow or prevent operation. The design includes limit switches, key-activated switches and emergency stop button and surveillance camera. Entry procedure is also developed as written record and for information purposes. As a result, through this safety implementation human error will be prevented, increase alertness during operation and minimizing unnecessary radiation exposure.

Selected considerations of implementation of the GNSS

NASA Astrophysics Data System (ADS)

Cwiklak, Janusz; Fellner, Andrzej; Fellner, Radoslaw; Jafernik, Henryk; Sledzinski, Janusz

2014-05-01

The article describes analysis of the safety and risk for the implementation of precise approach procedures (Localizer Performance and Vertical Guidance - LPV) with GNSS sensor at airports in Warsaw and Katowice. There were used some techniques of the identification of threats (inducing controlled flight into terrain, landing accident, mid-air collision) and evaluations methods based on Fault Tree Analysis, probability of the risk, safety risk evaluation matrix and Functional Hazard Assesment. Also safety goals were determined. Research led to determine probabilities of appearing of threats, as well as allow compare them with regard to the ILS. As a result of conducting the Preliminary System Safety Assessment (PSSA), there were defined requirements essential to reach the required level of the safety. It is worth to underline, that quantitative requirements were defined using FTA.

Developing implementation strategies for firearm safety promotion in paediatric primary care for suicide prevention in two large US health systems: a study protocol for a mixed-methods implementation study.

PubMed

Wolk, Courtney Benjamin; Jager-Hyman, Shari; Marcus, Steven C; Ahmedani, Brian K; Zeber, John E; Fein, Joel A; Brown, Gregory K; Lieberman, Adina; Beidas, Rinad S

2017-06-24

The promotion of safe firearm practices, or firearms means restriction, is a promising but infrequently used suicide prevention strategy in the USA. Safety Check is an evidence-based practice for improving parental firearm safety behaviour in paediatric primary care. However, providers rarely discuss firearm safety during visits, suggesting the need to better understand barriers and facilitators to promoting this approach. This study, Adolescent Suicide Prevention In Routine clinical Encounters, aims to engender a better understanding of how to implement the three firearm components of Safety Check as a suicide prevention strategy in paediatric primary care. The National Institute of Mental Health-funded Mental Health Research Network (MHRN), a consortium of 13 healthcare systems across the USA, affords a unique opportunity to better understand how to implement a firearm safety intervention in paediatric primary care from a system-level perspective. We will collaboratively develop implementation strategies in partnership with MHRN stakeholders. First, we will survey leadership of 82 primary care practices (ie, practices serving children, adolescents and young adults) within two MHRN systems to understand acceptability and use of the three firearm components of Safety Check (ie, screening, brief counselling around firearm safety and provision of firearm locks). Then, in collaboration with MHRN stakeholders, we will use intervention mapping and the Consolidated Framework for Implementation Research to systematically develop and evaluate a multilevel menu of implementation strategies for promoting firearm safety as a suicide prevention strategy in paediatric primary care. Study procedures have been approved by the University of Pennsylvania. Henry Ford Health System and Baylor Scott & White institutional review boards (IRBs) have ceded IRB review to the University of Pennsylvania IRB. Results will be submitted for publication in peer-reviewed journals. © Article

Implementation of Energy Code Controls Requirements in New Commercial Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosenberg, Michael I.; Hart, Philip R.; Hatten, Mike

Most state energy codes in the United States are based on one of two national model codes; ANSI/ASHRAE/IES 90.1 (Standard 90.1) or the International Code Council (ICC) International Energy Conservation Code (IECC). Since 2004, covering the last four cycles of Standard 90.1 updates, about 30% of all new requirements have been related to building controls. These requirements can be difficult to implement and verification is beyond the expertise of most building code officials, yet the assumption in studies that measure the savings from energy codes is that they are implemented and working correctly. The objective of the current research ismore » to evaluate the degree to which high impact controls requirements included in commercial energy codes are properly designed, commissioned and implemented in new buildings. This study also evaluates the degree to which these control requirements are realizing their savings potential. This was done using a three-step process. The first step involved interviewing commissioning agents to get a better understanding of their activities as they relate to energy code required controls measures. The second involved field audits of a sample of commercial buildings to determine whether the code required control measures are being designed, commissioned and correctly implemented and functioning in new buildings. The third step includes compilation and analysis of the information gather during the first two steps. Information gathered during these activities could be valuable to code developers, energy planners, designers, building owners, and building officials.« less

77 FR 75439 - Guidances for Industry and Investigators on Safety Reporting Requirements for Investigational New...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-20

... Reporting Requirements for INDs and BA/BE Studies'' and ``Safety Reporting Requirements for INDs and BA/BE...) and bioavailability (BA) and bioequivalence (BE) studies. DATES: Submit either electronic or written... Reporting Requirements for INDs and BA/BE Studies'' and ``Safety Reporting Requirements for INDs and BA/BE...

MRP (materiel requirements planning) II: successful implementation the hard way.

PubMed

Grubbs, S C

1994-05-01

Many manufacturing companies embark on MRP II implementation projects as a method for improvement. In spite of an increasing body of knowledge regarding successful implementations, companies continue to attempt new approaches. This article reviews an actual implementation, featuring some of the mistakes made and the efforts required to still achieve "Class A" performance levels.

Safety Assurance in NextGen

NASA Technical Reports Server (NTRS)

HarrisonFleming, Cody; Spencer, Melissa; Leveson, Nancy; Wilkinson, Chris

2012-01-01

The generation of minimum operational, safety, performance, and interoperability requirements is an important aspect of safely integrating new NextGen components into the Communication Navigation Surveillance and Air Traffic Management (CNS/ATM) system. These requirements are used as part of the implementation and approval processes. In addition, they provide guidance to determine the levels of design assurance and performance that are needed for each element of the new NextGen procedures, including aircraft, operator, and Air Navigation and Service Provider. Using the enhanced Airborne Traffic Situational Awareness for InTrail Procedure (ATSA-ITP) as an example, this report describes some limitations of the current process used for generating safety requirements and levels of required design assurance. An alternative process is described, as well as the argument for why the alternative can generate more comprehensive requirements and greater safety assurance than the current approach.

Knowledge and perceived implementation of food safety risk analysis framework in Latin America and the Caribbean region.

PubMed

Cherry, C; Mohr, A Hofelich; Lindsay, T; Diez-Gonzalez, F; Hueston, W; Sampedro, F

2014-12-01

Risk analysis is increasingly promoted as a tool to support science-based decisions regarding food safety. An online survey comprising 45 questions was used to gather information on the implementation of food safety risk analysis within the Latin American and Caribbean regions. Professionals working in food safety in academia, government, and private sectors in Latin American and Caribbean countries were contacted by email and surveyed to assess their individual knowledge of risk analysis and perceptions of its implementation in the region. From a total of 279 participants, 97% reported a familiarity with risk analysis concepts; however, fewer than 25% were able to correctly identify its key principles. The reported implementation of risk analysis among the different professional sectors was relatively low (46%). Participants from industries in countries with a long history of trade with the United States and the European Union, such as Mexico, Brazil, and Chile, reported perceptions of a higher degree of risk analysis implementation (56, 50, and 20%, respectively) than those from the rest of the countries, suggesting that commerce may be a driver for achieving higher food safety standards. Disagreement among respondents on the extent of the use of risk analysis in national food safety regulations was common, illustrating a systematic lack of understanding of the current regulatory status of the country. The results of this survey can be used to target further risk analysis training on selected sectors and countries.

Protect Their Eyes: An Eye Safety Guide for the Classroom.

ERIC Educational Resources Information Center

Ohio Society to Prevent Blindness, Columbus.

This guide provides information on eye safety and aids educators, administrators, and supervisors in the development and implementation of eye safety programs. The American National Standards Institute (AMSI) requirements for both street and safety glasses; essential eyewear for safety in hazardous areas; the National Society to Prevent…

49 CFR 236.1011 - PTC Implementation Plan content requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... technology embedded in PTC systems that does not employ all of the functionalities required by this subpart... INSTALLATION, INSPECTION, MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Positive Train Control Systems § 236.1011 PTC Implementation Plan content requirements. (a) Contents. A...

49 CFR 236.1011 - PTC Implementation Plan content requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... technology embedded in PTC systems that does not employ all of the functionalities required by this subpart... INSTALLATION, INSPECTION, MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Positive Train Control Systems § 236.1011 PTC Implementation Plan content requirements. (a) Contents. A...

49 CFR 236.1011 - PTC Implementation Plan content requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... technology embedded in PTC systems that does not employ all of the functionalities required by this subpart... INSTALLATION, INSPECTION, MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Positive Train Control Systems § 236.1011 PTC Implementation Plan content requirements. (a) Contents. A...

Implementing a pediatric surgical safety checklist in the OR and beyond.

PubMed

Norton, Elizabeth K; Rangel, Shawn J

2010-07-01

An international study about implementation of the World Health Organization Surgical Safety Checklist showed that use of the checklist reduced complication and death rates in adult surgical patients. Clinicians at Children's Hospital Boston, Massachusetts, modified the Surgical Safety Checklist for pediatric populations. We pilot tested the Pediatric Surgical Safety Checklist and created a large checklist poster for each OR to allow the entire surgical team to view the checklist simultaneously and to promote shared responsibility for conducting the time out. Results of the pilot test showed improvements in teamwork, communication, and adherence to process measures. Parallel efforts were made in other areas of the hospital where invasive procedures are performed. Compliance with the checklist at our facility has been good, and team members have expressed satisfaction with the flow and content of the checklist. Copyright (c) 2010 AORN, Inc. Published by Elsevier Inc. All rights reserved.

32 CFR 861.4 - DOD air transportation quality and safety requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... programs and business practices that not only ensure good service but also enhance the safety, operational...) “Equivalent to the services sought by DOD” means service offered to qualify for DOD approval must be... § 861.4 DOD air transportation quality and safety requirements. (a) General. The DOD, as a customer of...

Westinghouse Hanford Company (WHC) standards/requirements identification document (S/RID)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennett, G.L.

1996-03-15

This Standards/Requirements Identification Document (S/RID) set forth the Environmental Safety and Health (ES&H) standards/requirements for Westinghouse Hanford Company Level Programs, where implementation and compliance is the responsibility of these organizations. These standards/requirements are adequate to ensure the protection of the health and safety of workers, the public, and the environment.

DOE explosives safety manual

NASA Astrophysics Data System (ADS)

1990-05-01

The Department of Energy (DOE) policy requires that all activities be conducted in a manner that protects the safety of the public and provides a safe and healthful workplace for employees. DOE has also prescribed that all personnel be protected in any explosives operation undertaken. The level of safety provided shall be at least equivalent to that of the best industrial practice. The risk of death or serious injury shall be limited to the lowest practicable minimum. DOE and contractors shall continually review their explosives operations with the aim of achieving further refinements and improvements in safety practices and protective features. This manual describes the Department's explosive safety requirements applicable to operations involving the development, testing, handling, and processing of explosives or assemblies containing explosives. It is intended to reflect the state-of-the-art in explosives safety. In addition, it is essential that applicable criteria and requirements for implementing this policy be readily available and known to those responsible for conducting DOE programs. This document shall be periodically reviewed and updated to establish new requirements as appropriate. Users are requested to submit suggestions for improving the DOE Explosives Safety Manual through their appropriate Operations Office to the Office of Quality Programs.

75 FR 60129 - Draft Guidance for Industry and Investigators on Safety Reporting Requirements for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-29

... with the new requirements in the final rule entitled ``Investigational New Drug Safety Reporting...] Draft Guidance for Industry and Investigators on Safety Reporting Requirements for Investigational New... the agency considers your comment on this draft guidance before it begins work on the final version of...

Request for Naval Reactors Comment on Proposed Prometheus Space Flight Nuclear Reactor High Tier Reactor Safety Requirements and for Naval Reactors Approval to Transmit These Requirements to JPL

DOE Office of Scientific and Technical Information (OSTI.GOV)

D. Kokkinos

2005-04-28

The purpose of this letter is to request Naval Reactors comments on the nuclear reactor high tier requirements for the PROMETHEUS space flight reactor design, pre-launch operations, launch, ascent, operation, and disposal, and to request Naval Reactors approval to transmit these requirements to Jet Propulsion Laboratory to ensure consistency between the reactor safety requirements and the spacecraft safety requirements. The proposed PROMETHEUS nuclear reactor high tier safety requirements are consistent with the long standing safety culture of the Naval Reactors Program and its commitment to protecting the health and safety of the public and the environment. In addition, the philosophymore » on which these requirements are based is consistent with the Nuclear Safety Policy Working Group recommendations on space nuclear propulsion safety (Reference 1), DOE Nuclear Safety Criteria and Specifications for Space Nuclear Reactors (Reference 2), the Nuclear Space Power Safety and Facility Guidelines Study of the Applied Physics Laboratory.« less

Project #10404 - Scoping Study for Implementation of the Highway Safety Manual in Alabama

DOT National Transportation Integrated Search

2012-08-01

This report outlines a cost-effective and thoughtful way to implement the Highway Safety Manual (HSM) in Alabama. The HSM was published by the American Association of State Highway and Transportation Officials, and it was prepared by the Transportati...

Implementing an Integrated Commitment Management System at the Savannah River Site Tank Farms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blanchard, A.

1999-06-16

Recently, the Savannah River Site Tank Farms have been transitioning from pre-1990 Authorization Basis requirements to new 5480.22/.23 requirements. Implementation of the new Authorization Basis has resulted in more detailed requirements, a completely new set of implementing procedures, and the expectation of even more disciplined operations. Key to the success of this implementation has been the development of an Integrated Commitment Management System (ICMS) by Westinghouse Safety Management Solutions. The ICMS has two elements: the Authorization Commitment Matrix (ACM), and a Procedure Consistency Review methodology. The Authorization Commitment Matrix is a linking database, which ties requirements and implementing documents together.more » The associated Procedure Consistency Review process ensures that the procedures to be credited in the ACM do in fact correctly and completely meet all intended commitments. This Integrated Commitment Management System helps Westinghouse Safety Management Solutions and the facility operations and engineering organizations take ownership in the implementation of the requirements that have been developed.« less

42 CFR 9.10 - Occupational Health and Safety Program (OHSP) and biosafety requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 1 2013-10-01 2013-10-01 false Occupational Health and Safety Program (OHSP) and... SANCTUARY SYSTEM § 9.10 Occupational Health and Safety Program (OHSP) and biosafety requirements. (a) How are employee Occupational Health and Safety Program risks and concerns addressed? The sanctuary shall...

42 CFR 9.10 - Occupational Health and Safety Program (OHSP) and biosafety requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 1 2014-10-01 2014-10-01 false Occupational Health and Safety Program (OHSP) and... SANCTUARY SYSTEM § 9.10 Occupational Health and Safety Program (OHSP) and biosafety requirements. (a) How are employee Occupational Health and Safety Program risks and concerns addressed? The sanctuary shall...

42 CFR 9.10 - Occupational Health and Safety Program (OHSP) and biosafety requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 1 2012-10-01 2012-10-01 false Occupational Health and Safety Program (OHSP) and... SANCTUARY SYSTEM § 9.10 Occupational Health and Safety Program (OHSP) and biosafety requirements. (a) How are employee Occupational Health and Safety Program risks and concerns addressed? The sanctuary shall...

42 CFR 9.10 - Occupational Health and Safety Program (OHSP) and biosafety requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 1 2011-10-01 2011-10-01 false Occupational Health and Safety Program (OHSP) and... SANCTUARY SYSTEM § 9.10 Occupational Health and Safety Program (OHSP) and biosafety requirements. (a) How are employee Occupational Health and Safety Program risks and concerns addressed? The sanctuary shall...

42 CFR 9.10 - Occupational Health and Safety Program (OHSP) and biosafety requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Occupational Health and Safety Program (OHSP) and... SANCTUARY SYSTEM § 9.10 Occupational Health and Safety Program (OHSP) and biosafety requirements. (a) How are employee Occupational Health and Safety Program risks and concerns addressed? The sanctuary shall...

A Review of Safety and Design Requirements of the Artificial Pancreas.

PubMed

Blauw, Helga; Keith-Hynes, Patrick; Koops, Robin; DeVries, J Hans

2016-11-01

As clinical studies with artificial pancreas systems for automated blood glucose control in patients with type 1 diabetes move to unsupervised real-life settings, product development will be a focus of companies over the coming years. Directions or requirements regarding safety in the design of an artificial pancreas are, however, lacking. This review aims to provide an overview and discussion of safety and design requirements of the artificial pancreas. We performed a structured literature search based on three search components-type 1 diabetes, artificial pancreas, and safety or design-and extended the discussion with our own experiences in developing artificial pancreas systems. The main hazards of the artificial pancreas are over- and under-dosing of insulin and, in case of a bi-hormonal system, of glucagon or other hormones. For each component of an artificial pancreas and for the complete system we identified safety issues related to these hazards and proposed control measures. Prerequisites that enable the control algorithms to provide safe closed-loop control are accurate and reliable input of glucose values, assured hormone delivery and an efficient user interface. In addition, the system configuration has important implications for safety, as close cooperation and data exchange between the different components is essential.

Revealing and Resolving Patient Safety Defects: The Impact of Leadership WalkRounds on Frontline Caregiver Assessments of Patient Safety

PubMed Central

Frankel, Allan; Grillo, Sarah Pratt; Pittman, Mary; Thomas, Eric J; Horowitz, Lisa; Page, Martha; Sexton, Bryan

2008-01-01

Objective To evaluate the impact of rigorous WalkRounds on frontline caregiver assessments of safety climate, and to clarify the steps and implementation of rigorous WalkRounds. Data Sources/Study Setting Primary outcome variables were baseline and post WalkRounds safety climate scores from the Safety Attitudes Questionnaire (SAQ). Secondary outcomes were safety issues elicited through WalkRounds. Study period was August 2002 to April 2005; seven hospitals in Massachusetts agreed to participate; and the project was implemented in all patient care areas. Study Design Prospective study of the impact of rigorously applied WalkRounds on frontline caregivers assessments of safety climate in their patient care area. WalkRounds were conducted weekly and according to the seven-step WalkRounds Guide. The SAQ was administered at baseline and approximately 18 months post-WalkRounds implementation to all caregivers in patient care areas. Results Two of seven hospitals complied with the rigorous WalkRounds approach; hospital A was an academic teaching center and hospital B a community teaching hospital. Of 21 patient care areas, SAQ surveys were received from 62 percent of respondents at baseline and 60 percent post WalkRounds. At baseline, 10 of 21 care areas (48 percent) had safety climate scores below 60 percent, whereas post-WalkRounds three care areas (14 percent) had safety climate scores below 60 percent without improving by 10 points or more. Safety climate scale scores in hospital A were 62 percent at baseline and 77 percent post-WalkRounds (t=2.67, p=.03), and in hospital B were 46 percent at baseline and 56 percent post WalkRounds (t=2.06, p=.06). Main safety issues by category were equipment/facility (A [26 percent] and B [33 percent]) and communication (A [24 percent] and B [18 percent]). Conclusions WalkRounds implementation requires significant organizational will; sustainability requires outstanding project management and leadership engagement. In the patient

- Lifesaving & Fire Safety « Coast Guard Maritime Commons

Science.gov Websites

. and Canadian implementation of lifejacket safety requirements and testing methods. 11/22/2017: Notice explore other contributing factors, it uncovered evidence of an ineffective safety management system Guard itself to provide effective oversight of the vessel's compliance with safety regulations. 9/26

10 CFR 830.4 - General requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 4 2013-01-01 2013-01-01 false General requirements. 830.4 Section 830.4 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT § 830.4 General requirements. (a) No person may take or cause... for a nuclear facility must ensure implementation of, and compliance with, the requirements of this...

10 CFR 830.4 - General requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 4 2012-01-01 2012-01-01 false General requirements. 830.4 Section 830.4 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT § 830.4 General requirements. (a) No person may take or cause... for a nuclear facility must ensure implementation of, and compliance with, the requirements of this...

10 CFR 830.4 - General requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false General requirements. 830.4 Section 830.4 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT § 830.4 General requirements. (a) No person may take or cause... for a nuclear facility must ensure implementation of, and compliance with, the requirements of this...

10 CFR 830.4 - General requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false General requirements. 830.4 Section 830.4 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT § 830.4 General requirements. (a) No person may take or cause... for a nuclear facility must ensure implementation of, and compliance with, the requirements of this...

Risk management for drinking water safety in low and middle income countries - cultural influences on water safety plan (WSP) implementation in urban water utilities.

PubMed

Omar, Yahya Y; Parker, Alison; Smith, Jennifer A; Pollard, Simon J T

2017-01-15

We investigated cultural influences on the implementation of water safety plans (WSPs) using case studies from WSP pilots in India, Uganda and Jamaica. A comprehensive thematic analysis of semi-structured interviews (n=150 utility customers, n=32 WSP 'implementers' and n=9 WSP 'promoters'), field observations and related documents revealed 12 cultural themes, offered as 'enabling', 'limiting', or 'neutral', that influence WSP implementation in urban water utilities to varying extents. Aspects such as a 'deliver first, safety later' mind set; supply system knowledge management and storage practices; and non-compliance are deemed influential. Emergent themes of cultural influence (ET1 to ET12) are discussed by reference to the risk management, development studies and institutional culture literatures; by reference to their positive, negative or neutral influence on WSP implementation. The results have implications for the utility endorsement of WSPs, for the impact of organisational cultures on WSP implementation; for the scale-up of pilot studies; and they support repeated calls from practitioner communities for cultural attentiveness during WSP design. Findings on organisational cultures mirror those from utilities in higher income nations implementing WSPs - leadership, advocacy among promoters and customers (not just implementers) and purposeful knowledge management are critical to WSP success. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

CRITICALITY SAFETY CONTROLS AND THE SAFETY BASIS AT PFP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kessler, S

2009-04-21

With the implementation of DOE Order 420.1B, Facility Safety, and DOE-STD-3007-2007, 'Guidelines for Preparing Criticality Safety Evaluations at Department of Energy Non-Reactor Nuclear Facilities', a new requirement was imposed that all criticality safety controls be evaluated for inclusion in the facility Documented Safety Analysis (DSA) and that the evaluation process be documented in the site Criticality Safety Program Description Document (CSPDD). At the Hanford site in Washington State the CSPDD, HNF-31695, 'General Description of the FH Criticality Safety Program', requires each facility develop a linking document called a Criticality Control Review (CCR) to document performance of these evaluations. Chapter 5,more » Appendix 5B of HNF-7098, Criticality Safety Program, provided an example of a format for a CCR that could be used in lieu of each facility developing its own CCR. Since the Plutonium Finishing Plant (PFP) is presently undergoing Deactivation and Decommissioning (D&D), new procedures are being developed for cleanout of equipment and systems that have not been operated in years. Existing Criticality Safety Evaluations (CSE) are revised, or new ones written, to develop the controls required to support D&D activities. Other Hanford facilities, including PFP, had difficulty using the basic CCR out of HNF-7098 when first implemented. Interpretation of the new guidelines indicated that many of the controls needed to be elevated to TSR level controls. Criterion 2 of the standard, requiring that the consequence of a criticality be examined for establishing the classification of a control, was not addressed. Upon in-depth review by PFP Criticality Safety staff, it was not clear that the programmatic interpretation of criterion 8C could be applied at PFP. Therefore, the PFP Criticality Safety staff decided to write their own CCR. The PFP CCR provides additional guidance for the evaluation team to use by clarifying the evaluation criteria in DOE-STD-3007

77 FR 28451 - Unsatisfactory Safety Rating; Revocation of Operating Authority Registration; Technical Amendments

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-14

... carrier for failure to comply with safety fitness requirements; if the Agency determines that a motor carrier is ``Unfit'' based on its Safety Fitness Determination procedures, the Agency must revoke the... failure to comply with safety fitness requirements. See 49 U.S.C. 13905(f)(1)(B) and (3). The implementing...

Implementation and evaluation of a patient safety course in a problem-based learning program.

PubMed

Eltony, Sarah Ahmed; El-Sayed, Nahla Hassan; El-Araby, Shimaa El-Sayed; Kassab, Salah Eldin

2017-01-01

Since the development of the WHO patient safety curriculum guide, there has been insufficient reporting regarding the implementation and evaluation of patient safety courses in undergraduate problem-based learning (PBL) programs. This study is designed to implement a patient safety course to undergraduate students in a PBL medical school and evaluate this course by examining its effects on students' knowledge and satisfaction. The target population included year 6 medical students (n = 71) at the Faculty of Medicine, Suez Canal University in Egypt. A 3-day course was conducted addressing three principal topics from the WHO patient safety curriculum guide. The methods of instruction included reflection on students' past experiences, PBL case discussions, and tasks with incident report cards. A pre- and post-test design was used to assess the effect of the course on students' knowledge of inpatient safety topics. Furthermore, students' perceptions of the quality of the course were assessed through a structured self-administered course evaluation questionnaire. The results of the pre- and post-test demonstrated a significant increase (P < 0.05) in the students' mean multiple choice question (MCQ) scores. The MCQ scores for "what is patient safety" topic increased by 50% (P < 0.01). Similarly, the MCQ scores for the "infection control" topic increased by 39% (P < 0.01), and scores for the "medication safety" topic increased by 45% (P < 0.01). The majority of students perceived the different aspects of the course positively, including the structure and introduction of the course (75%) and the communication skills (83.2%) and teamwork skills they had developed (94.4%). The findings of the incident report cards indicated that 46.7% of the students perceived that incidents most commonly take place in the emergency room while only 6.7% in the outpatient clinic. This patient safety education program within a PBL curriculum is positively perceived by students. Furthermore

Student Threat Assessment as a Standard School Safety Practice: Results from a Statewide Implementation Study

ERIC Educational Resources Information Center

Cornell, Dewey; Maeng, Jennifer L.; Burnette, Anna Grace; Jia, Yuane; Huang, Francis; Konold, Timothy; Datta, Pooja; Malone, Marisa; Meyer, Patrick

2018-01-01

Threat assessment has been widely endorsed as a school safety practice, but there is little research on its implementation. In 2013, Virginia became the first state to mandate student threat assessment in its public schools. The purpose of this study was to examine the statewide implementation of threat assessment and to identify how threat…

30 CFR 250.459 - What are the safety requirements for drilling fluid-handling areas?

Code of Federal Regulations, 2012 CFR

2012-07-01

... ENFORCEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Drilling Operations Drilling Fluid Requirements § 250.459 What are the safety... 30 Mineral Resources 2 2012-07-01 2012-07-01 false What are the safety requirements for drilling...

30 CFR 250.459 - What are the safety requirements for drilling fluid-handling areas?

Code of Federal Regulations, 2013 CFR

2013-07-01

... ENFORCEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Drilling Operations Drilling Fluid Requirements § 250.459 What are the safety... 30 Mineral Resources 2 2013-07-01 2013-07-01 false What are the safety requirements for drilling...

30 CFR 250.459 - What are the safety requirements for drilling fluid-handling areas?

Code of Federal Regulations, 2014 CFR

2014-07-01

... ENFORCEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Drilling Operations Drilling Fluid Requirements § 250.459 What are the safety... 30 Mineral Resources 2 2014-07-01 2014-07-01 false What are the safety requirements for drilling...

Implementing a patient safety and quality program across two merged pediatric institutions.

PubMed

Abramson, Erika; Hyman, Daniel; Osorio, S Nena; Kaushal, Rainu

2009-01-01

Academic centers are among the health care organizations that have used consolidation as a strategy to improve efficiency and reduce costs. In 1997, the New York Hospital and The Presbyterian Hospital underwent a full-asset merger to become New York City's largest medical center, known as the New York-Presbyterian Hospital (NYPH). In 2006, recognition of the challenges of the Children's Service Line at NYPH led to the formation of a Patient Safety and Quality Program to deliver consistently safe and effective health care. Each campus has a children's quality council, an interdisciplinary group that discusses and prioritizes safety and quality issues. The quality councils from each campus report directly to a bicampus children's quality steering committee formed to ensure that similar safety practices and standards are implemented across both children's hospitals. A safety subcommittee, which primarily coordinates and follows up on leadership safety walk rounds, and a significant-events subcommittee, which reviews morbidities and mortalities, report to each hospital's quality council. The bicampus pediatric quality and safety program is organized around five broad themes: improving the culture of safety, reducing the frequency of health care-acquired infections, reducing harm in the health care setting, using information technology to improve the quality and safety of care provided to patients and families, and measuring the effectiveness of care in key areas. Two sample initiatives--building family engagement and prevention of adverse medication events--illustrate the program's successes and challenges. Developing a pediatric safety and quality program across two campuses has been challenging but has led to important improvements at both organizations.

41 CFR 128-1.8006 - Seismic Safety Program requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... reviewer shall verify that the current level of seismic resistance of the existing building at least equals the seismic resistance level of the building before the addition. (c) The Department Seismic Safety... conduct the reviews required under this section, as appropriate. (a) New building projects. Construction...

Design Tools for Cost-Effective Implementation of Planetary Protection Requirements

NASA Technical Reports Server (NTRS)

Hamlin, Louise; Belz, Andrea; Evans, Michael; Kastner, Jason; Satter, Celeste; Spry, Andy

2006-01-01

Since the Viking missions to Mars in the 1970s, accounting for the costs associated with planetary protection implementation has not been done systematically during early project formulation phases, leading to unanticipated costs during subsequent implementation phases of flight projects. The simultaneous development of more stringent planetary protection requirements, resulting from new knowledge about the limits of life on Earth, together with current plans to conduct life-detection experiments on a number of different solar system target bodies motivates a systematic approach to integrating planetary protection requirements and mission design. A current development effort at NASA's Jet Propulsion Laboratory is aimed at integrating planetary protection requirements more fully into the early phases of mission architecture formulation and at developing tools to more rigorously predict associated cost and schedule impacts of architecture options chosen to meet planetary protection requirements.

NASA Safety Manual. Volume 3: System Safety

NASA Technical Reports Server (NTRS)

1970-01-01

This Volume 3 of the NASA Safety Manual sets forth the basic elements and techniques for managing a system safety program and the technical methods recommended for use in developing a risk evaluation program that is oriented to the identification of hazards in aerospace hardware systems and the development of residual risk management information for the program manager that is based on the hazards identified. The methods and techniques described in this volume are in consonance with the requirements set forth in NHB 1700.1 (VI), Chapter 3. This volume and future volumes of the NASA Safety Manual shall not be rewritten, reprinted, or reproduced in any manner. Installation implementing procedures, if necessary, shall be inserted as page supplements in accordance with the provisions of Appendix A. No portion of this volume or future volumes of the NASA Safety Manual shall be invoked in contracts.

Edible safety requirements and assessment standards for agricultural genetically modified organisms.

PubMed

Deng, Pingjian; Zhou, Xiangyang; Zhou, Peng; Du, Zhong; Hou, Hongli; Yang, Dongyan; Tan, Jianjun; Wu, Xiaojin; Zhang, Jinzhou; Yang, Yongcun; Liu, Jin; Liu, Guihua; Li, Yonghong; Liu, Jianjun; Yu, Lei; Fang, Shisong; Yang, Xiaoke

2008-05-01

This paper describes the background, principles, concepts and methods of framing the technical regulation for edible safety requirement and assessment of agricultural genetically modified organisms (agri-GMOs) for Shenzhen Special Economic Zone in the People's Republic of China. It provides a set of systematic criteria for edible safety requirements and the assessment process for agri-GMOs. First, focusing on the degree of risk and impact of different agri-GMOs, we developed hazard grades for toxicity, allergenicity, anti-nutrition effects, and unintended effects and standards for the impact type of genetic manipulation. Second, for assessing edible safety, we developed indexes and standards for different hazard grades of recipient organisms, for the influence of types of genetic manipulation and hazard grades of agri-GMOs. To evaluate the applicability of these criteria and their congruency with other safety assessment systems for GMOs applied by related organizations all over the world, we selected some agri-GMOs (soybean, maize, potato, capsicum and yeast) as cases to put through our new assessment system, and compared our results with the previous assessments. It turned out that the result of each of the cases was congruent with the original assessment.

Spacelab user implementation assessment study. (Software requirements analysis). Volume 2: Technical report

NASA Technical Reports Server (NTRS)

1976-01-01

The engineering analyses and evaluation studies conducted for the Software Requirements Analysis are discussed. Included are the development of the study data base, synthesis of implementation approaches for software required by both mandatory onboard computer services and command/control functions, and identification and implementation of software for ground processing activities.

Simulation-based assessment in anesthesiology: requirements for practical implementation.

PubMed

Boulet, John R; Murray, David J

2010-04-01

Simulations have taken a central role in the education and assessment of medical students, residents, and practicing physicians. The introduction of simulation-based assessments in anesthesiology, especially those used to establish various competencies, has demanded fairly rigorous studies concerning the psychometric properties of the scores. Most important, major efforts have been directed at identifying, and addressing, potential threats to the validity of simulation-based assessment scores. As a result, organizations that wish to incorporate simulation-based assessments into their evaluation practices can access information regarding effective test development practices, the selection of appropriate metrics, the minimization of measurement errors, and test score validation processes. The purpose of this article is to provide a broad overview of the use of simulation for measuring physician skills and competencies. For simulations used in anesthesiology, studies that describe advances in scenario development, the development of scoring rubrics, and the validation of assessment results are synthesized. Based on the summary of relevant research, psychometric requirements for practical implementation of simulation-based assessments in anesthesiology are forwarded. As technology expands, and simulation-based education and evaluation takes on a larger role in patient safety initiatives, the groundbreaking work conducted to date can serve as a model for those individuals and organizations that are responsible for developing, scoring, or validating simulation-based education and assessment programs in anesthesiology.

[The Scope, Quality and Safety Requirements of Drug Abuse Testing].

PubMed

Küme, Tuncay; Karakükcü, Çiğdem; Pınar, Aslı; Coşkunol, Hakan

2017-01-01

The aim of this review is to inform about the scopes and requirements of drug abuse testing. Drug abuse testing is one of the tools for determination of drug use. It must fulfill the quality and safety requirements in judgmental legal and administrative decisions. Drug abuse testing must fulfill some requirements like selection of the appropriate test matrix, appropriate screening test panel, sampling in detection window, patient consent, identification of the donor, appropriate collection site, sample collection with observation, identification and control of the sample, specimen custody chain in preanalytical phase; analysis in authorized laboratories, specimen validity tests, reliable testing METHODS, strict quality control, two-step analysis in analytical phase; storage of the split specimen, confirmation of the split specimen in the objection, result custody chain, appropriate cut-off concentration, the appropriate interpretation of the result in postanalytical phase. The workflow and analytical processes of drug abuse testing are explained in last regulation of the Department of Medical Laboratory Services, Ministry of Health in Turkey. The clinical physicians have to know and apply the quality and safety requirements in drug abuse testing according to last regulations in Turkey.

Design and Implementation of the Harvard Fellowship in Patient Safety and Quality.

PubMed

Gandhi, Tejal K; Abookire, Susan A; Kachalia, Allen; Sands, Kenneth; Mort, Elizabeth; Bommarito, Grace; Gagne, Jane; Sato, Luke; Weingart, Saul N

2016-01-01

The Harvard Fellowship in Patient Safety and Quality is a 2-year physician-oriented training program with a strong operational orientation, embedding trainees in the quality departments of participating hospitals. It also integrates didactic and experiential learning and offers the option of obtaining a master's degree in public health. The program focuses on methodologically rigorous improvement and measurement, with an emphasis on the development and implementation of innovative practice. The operational orientation is intended to foster the professional development of future quality and safety leaders. The purpose of this article is to describe the design and development of the fellowship. © The Author(s) 2014.

Requirements for guidelines systems: implementation challenges and lessons from existing software-engineering efforts.

PubMed

Shah, Hemant; Allard, Raymond D; Enberg, Robert; Krishnan, Ganesh; Williams, Patricia; Nadkarni, Prakash M

2012-03-09

A large body of work in the clinical guidelines field has identified requirements for guideline systems, but there are formidable challenges in translating such requirements into production-quality systems that can be used in routine patient care. Detailed analysis of requirements from an implementation perspective can be useful in helping define sub-requirements to the point where they are implementable. Further, additional requirements emerge as a result of such analysis. During such an analysis, study of examples of existing, software-engineering efforts in non-biomedical fields can provide useful signposts to the implementer of a clinical guideline system. In addition to requirements described by guideline-system authors, comparative reviews of such systems, and publications discussing information needs for guideline systems and clinical decision support systems in general, we have incorporated additional requirements related to production-system robustness and functionality from publications in the business workflow domain, in addition to drawing on our own experience in the development of the Proteus guideline system (http://proteme.org). The sub-requirements are discussed by conveniently grouping them into the categories used by the review of Isern and Moreno 2008. We cite previous work under each category and then provide sub-requirements under each category, and provide example of similar work in software-engineering efforts that have addressed a similar problem in a non-biomedical context. When analyzing requirements from the implementation viewpoint, knowledge of successes and failures in related software-engineering efforts can guide implementers in the choice of effective design and development strategies.

Requirements for guidelines systems: implementation challenges and lessons from existing software-engineering efforts

PubMed Central

2012-01-01

Background A large body of work in the clinical guidelines field has identified requirements for guideline systems, but there are formidable challenges in translating such requirements into production-quality systems that can be used in routine patient care. Detailed analysis of requirements from an implementation perspective can be useful in helping define sub-requirements to the point where they are implementable. Further, additional requirements emerge as a result of such analysis. During such an analysis, study of examples of existing, software-engineering efforts in non-biomedical fields can provide useful signposts to the implementer of a clinical guideline system. Methods In addition to requirements described by guideline-system authors, comparative reviews of such systems, and publications discussing information needs for guideline systems and clinical decision support systems in general, we have incorporated additional requirements related to production-system robustness and functionality from publications in the business workflow domain, in addition to drawing on our own experience in the development of the Proteus guideline system (http://proteme.org). Results The sub-requirements are discussed by conveniently grouping them into the categories used by the review of Isern and Moreno 2008. We cite previous work under each category and then provide sub-requirements under each category, and provide example of similar work in software-engineering efforts that have addressed a similar problem in a non-biomedical context. Conclusions When analyzing requirements from the implementation viewpoint, knowledge of successes and failures in related software-engineering efforts can guide implementers in the choice of effective design and development strategies. PMID:22405400

Safety-related requirements for photovoltaic modules and arrays

NASA Technical Reports Server (NTRS)

Levins, A.; Smoot, A.; Wagner, R.

1984-01-01

Safety requirements for photovoltaic module and panel designs and configurations for residential, intermediate, and large scale applications are investigated. Concepts for safety systems, where each system is a collection of subsystems which together address the total anticipated hazard situation, are described. Descriptions of hardware, and system usefulness and viability are included. A comparison of these systems, as against the provisions of the 1984 National Electrical Code covering photovoltaic systems is made. A discussion of the Underwriters Laboratory UL investigation of the photovoltaic module evaluated to the provisions of the proposed UL standard for plat plate photovoltaic modules and panels is included. Grounding systems, their basis and nature, and the advantages and disadvantages of each are described. The meaning of frame grounding, circuit groundings, and the type of circuit ground are covered.

Commercial Crew Program Crew Safety Strategy

NASA Technical Reports Server (NTRS)

Vassberg, Nathan; Stover, Billy

2015-01-01

The purpose of this presentation is to explain to our international partners (ESA and JAXA) how NASA is implementing crew safety onto our commercial partners under the Commercial Crew Program. It will show them the overall strategy of 1) how crew safety boundaries have been established; 2) how Human Rating requirements have been flown down into programmatic requirements and over into contracts and partner requirements; 3) how CCP SMA has assessed CCP Certification and CoFR strategies against Shuttle baselines; 4) Discuss how Risk Based Assessment (RBA) and Shared Assurance is used to accomplish these strategies.

Improving compliance with Occupational Safety and Health Administration standards.

PubMed

Cuming, Richard; Rocco, Tonette S; McEachern, Adriana G

2008-02-01

Health care facilities can be dangerous places. The mission of the Occupational Safety and Health Administration (OSHA) is to improve the safety of the American workplace by developing and implementing standards that prevent occupational injury, illness, and death. Perioperative services are performed in environments where exposure to bloodborne pathogens is a daily occurrence, making implementation and compliance with OSHA standards very important. Employees and employers must remain current with workplace safety requirements, including use of personal protective equipment. This article presents implications of the OSHA standards for employers, educators, and employees.

Crewed Space Vehicle Battery Safety Requirements Revision D

NASA Technical Reports Server (NTRS)

Russell, Samuel

2017-01-01

The Crewed Space Vehicle Battery Safety Requirements document has been prepared for use by designers of battery-powered vehicles, portable equipment, and experiments intended for crewed spaceflight. The purpose of the requirements document is to provide battery designers with information on design provisions to be incorporated in and around the battery and on the verification to be undertaken to demonstrate a safe battery is provided. The term "safe battery" means that the battery is safe for ground personnel and crew members to handle and use; safe to be used in the enclosed environment of a crewed space vehicle; and safe to be mounted or used in unpressurized spaces adjacent to habitable areas. Battery design review, approval, and certification is required before the batteries can be used for ground operations and be certified for flight.

Development and implementation of participant safety plans for international research with stigmatised populations.

PubMed

Sugarman, Jeremy; Barnes, Mark; Rose, Scott; Dumchev, Kostyantyn; Sarasvita, Riza; Viet, Ha Tran; Zeziulin, Oleksandr; Susami, Hepa; Go, Vivian; Hoffman, Irving; Miller, William C

2018-06-22

People who inject drugs with high-risk sharing practices have high rates of HIV transmission and face barriers to HIV care. Interventions to overcome these barriers are needed; however, stigmatisation of drug use and HIV infection leads to safety concerns during the planning and conduct of research on such interventions. In preparing to address concerns about safety and wellbeing of participants in an international research study, HIV Prevention Trials Network 074, we developed participant safety plans (PSPs) at each site to supplement local research ethics committee oversight, community engagement, and usual clinical trial procedures. The PSPs were informed by systematic local legal and policy assessments, and interviews with key stakeholders. After PSP refinement and implementation, we assessed social impacts at each study visit to ensure continued safety. Throughout the study, five participants reported a negative social impact, with three resulting from study participation. Future research with stigmatised populations should consider using and assessing this approach to enhance safety and welfare. Copyright © 2018 Elsevier Ltd. All rights reserved.

30 CFR 285.800 - How must I conduct my activities to comply with safety and environmental requirements?

Code of Federal Regulations, 2010 CFR

2010-07-01

... safety and environmental requirements? 285.800 Section 285.800 Mineral Resources MINERALS MANAGEMENT... OUTER CONTINENTAL SHELF Environmental and Safety Management, Inspections, and Facility Assessments for... safety and environmental requirements? (a) You must conduct all activities on your lease or grant under...

Evaluation and review of the safety management system implementation in the Royal Thai Air Force

NASA Astrophysics Data System (ADS)

Chaiwan, Sakkarin

This study was designed to determine situation and effectiveness of the safety management system currently implemented in the Royal Thai Air Force. Reviewing the ICAO's SMS and the RTAF's SMS was conducted to identify similarities and differences between the two safety management systems. Later, the researcher acquired safety statistics from the RTAF Safety Center to investigate effectiveness of its safety system. The researcher also collected data to identify other factors affecting effectiveness of the safety system during conducting in-depth interviews. Findings and Conclusions: The study shows that the Royal Thai Air Force has never applied the International Civil Aviation Organization's Safety management System to its safety system. However, the RTAF's SMS and the ICAO's SMS have been developed based on the same concepts. These concepts are from Richard H. Woods's book, Aviation safety programs: A management handbook. However, the effectiveness of the Royal Thai Air Force's safety system is in good stance. An accident rate has been decreasing regularly but there are no known factors to describe the increasing rate, according to the participants' opinion. The participants have informed that there are many issues to be resolved to improve the RTAF's safety system. Those issues are cooperation among safety center's staffs, attitude toward safety of the RTAF senior commanders, and safety standards.

Adapting and implementing an evidence-based sun-safety education program in rural Idaho, 2012.

PubMed

Cariou, Charlene; Gonzales, Melanie; Krebill, Hope

2014-05-08

Melanoma incidence and mortality rates in Idaho are higher than national averages. The importance of increased awareness of skin cancer has been cited by state and local organizations. St. Luke's Mountain States Tumor Institute (MSTI) prioritized educational outreach efforts to focus on the implementation of a skin cancer prevention program in rural Idaho. As a community cancer center, MSTI expanded cancer education services to include dedicated support to rural communities. Through this expansion, an MSTI educator sought to partner with a community organization to provide sun-safety education. MSTI selected, adapted, and implemented an evidence-based program, Pool Cool. The education program was implemented in 5 phases. In Phase I, we identified and recruited a community partner; in Phase 2, after thorough research, we selected a program, Pool Cool; in Phase 3, we planned the details of the program, including identification of desired short- and long-term outcomes and adaptation of existing program materials; in Phase 4, we implemented the program in summer 2012; in Phase 5, we assessed program sustainability and expansion. MSTI developed a sustainable partnership with Payette Municipal Pool, and in summer 2012, we implemented Pool Cool. Sun-safety education was provided to more than 700 young people aged 2 to 17 years, and educational signage and sunscreen benefitted hundreds of additional pool patrons. Community cancer centers are increasingly being asked to assess community needs and implement evidence-based prevention and screening programs. Clinical staff may become facilitators of evidence-based public health programs. Challenges of implementing evidence-based programs in the context of a community cancer centers are staffing, leveraging of resources, and ongoing training and support.

Vehicle-to-infrastructure (V2I) safety applications : performance requirements, vol. 1, introduction and common requirements.

DOT National Transportation Integrated Search

2015-08-01

This document is the first of a seven volume report that describes performance requirements for connected vehicle vehicle-to-infrastructure (V2I) Safety Applications developed for the U.S. Department of Transportation (U.S. DOT). The applications add...

[Design, implementation and evaluation of a management model of patient safety in hospitals in Catalonia, Spain].

PubMed

Saura, Rosa Maria; Moreno, Pilar; Vallejo, Paula; Oliva, Glòria; Alava, Fernando; Esquerra, Miquel; Davins, Josep; Vallès, Roser; Bañeres, Joaquim

2014-07-01

Since its inception in 2006, the Alliance for Patient Safety in Catalonia has played a major role in promoting and shaping a series of projects related to the strategy of the Ministry of Health, Social Services and Equality, for improving patient safety. One such project was the creation of functional units or committees of safety in hospitals in order to facilitate the management of patient safety. The strategy has been implemented in hospitals in Catalonia which were selected based on criteria of representativeness. The intervention was based on two lines of action, one to develop the model framework and the other for its development. Firstly the strategy for safety management based on EFQM (European Foundation for Quality Management) was defined with the development of standards, targets and indicators to implement security while the second part involved the introduction of tools, methodologies and knowledge to the management support of patient safety and risk prevention. The project was developed in four hospital areas considered higher risk, each assuming six goals for safety management. Some of these targets such as the security control panel or system of adverse event reporting were shared. 23 hospitals joined the project in Catalonia. Despite the different situations in each centre, high compliance was achieved in the development of the objectives. In each of the participating areas the security control panel was developed. Stable structures for safety management were established or strengthened. Training in patient safety played and important role, 1415 professionals participated. Through these kind of projects not only have been introduced programs of proven effectiveness in reducing risks, but they also provide to the facilities a work system that allows autonomy in diagnosis and analysis of the different risk situations or centre specific safety issues. Copyright © 2014. Published by Elsevier Espana.

Proposed system safety design and test requirements for the microlaser ordnance system

NASA Technical Reports Server (NTRS)

Stoltz, Barb A.; Waldo, Dale F.

1993-01-01

Safety for pyrotechnic ignition systems is becoming a major concern for the military. In the past twenty years, stray electromagnetic fields have steadily increased during peacetime training missions and have dramatically increased during battlefield missions. Almost all of the ordnance systems in use today depend on an electrical bridgewire for ignition. Unfortunately, the bridgewire is the cause of the majority of failure modes. The common failure modes include the following: broken bridgewires; transient RF power, which induces bridgewire heating; and cold temperatures, which contracts the explosive mix away from the bridgewire. Finding solutions for these failure modes is driving the costs of pyrotechnic systems up. For example, analyses are performed to verify that the system in the environment will not see more energy than 20 dB below the 'No-fire' level. Range surveys are performed to determine the operational, storage, and transportation RF environments. Cryogenic tests are performed to verify the bridgewire to mix interface. System requirements call for 'last minute installation,' 'continuity checks after installation,' and rotating safety devices to 'interrupt the explosive train.' As an alternative, MDESC has developed a new approach based upon our enabling laser diode technology. We believe that Microlaser initiated ordnance offers a unique solution to the bridgewire safety concerns. For this presentation, we will address, from a system safety viewpoint, the safety design and the test requirements for a Microlaser ordnance system. We will also review how this system could be compliant to MIL-STD-1576 and DOD-83578A and the additional necessary requirements.

Perceived Requirements of MIS Curriculum Implementation in Bilingual Developing Countries

ERIC Educational Resources Information Center

Kabeil, Magdy M.

2005-01-01

This paper addresses additional requirements associated with implementing a standard curriculum of Management Information Systems (MIS) in bilingual developing countries where both students and workplace users speak English as a second language. In such countries, MIS graduates are required to develop bilingual computer applications and to…

NASA ELV Payload Safety Program Information Exchange

NASA Technical Reports Server (NTRS)

Staubus, Cal; Palo, Tom; Dook, Mike; Donovan, Shawn

2007-01-01

This presentation details the Expendable Launch Vehicle (ELV) Payload Safety Program in its development and plan for implementation. It is an overview of the program's policies, process and requirements.

Nursing Information Systems Requirements: A Milestone for Patient Outcome and Patient Safety Improvement.

PubMed

Farzandipour, Mehrdad; Meidani, Zahra; Riazi, Hossein; Sadeqi Jabali, Monireh

2016-12-01

Considering the integral role of understanding users' requirements in information system success, this research aimed to determine functional requirements of nursing information systems through a national survey. Delphi technique method was applied to conduct this study through three phases: focus group method modified Delphi technique and classic Delphi technique. A cross-sectional study was conducted to evaluate the proposed requirements within 15 general hospitals in Iran. Forty-three of 76 approved requirements were clinical, and 33 were administrative ones. Nurses' mean agreements for clinical requirements were higher than those of administrative requirements; minimum and maximum means of clinical requirements were 3.3 and 3.88, respectively. Minimum and maximum means of administrative requirements were 3.1 and 3.47, respectively. Research findings indicated that those information system requirements that support nurses in doing tasks including direct care, medicine prescription, patient treatment management, and patient safety have been the target of special attention. As nurses' requirements deal directly with patient outcome and patient safety, nursing information systems requirements should not only address automation but also nurses' tasks and work processes based on work analysis.

Integrating evidence-based practices for increasing cancer screenings in safety net health systems: a multiple case study using the Consolidated Framework for Implementation Research.

PubMed

Liang, Shuting; Kegler, Michelle C; Cotter, Megan; Emily, Phillips; Beasley, Derrick; Hermstad, April; Morton, Rentonia; Martinez, Jeremy; Riehman, Kara

2016-08-02

Implementing evidence-based practices (EBPs) to increase cancer screenings in safety net primary care systems has great potential for reducing cancer disparities. Yet there is a gap in understanding the factors and mechanisms that influence EBP implementation within these high-priority systems. Guided by the Consolidated Framework for Implementation Research (CFIR), our study aims to fill this gap with a multiple case study of health care safety net systems that were funded by an American Cancer Society (ACS) grants program to increase breast and colorectal cancer screening rates. The initiative funded 68 safety net systems to increase cancer screening through implementation of evidence-based provider and client-oriented strategies. Data are from a mixed-methods evaluation with nine purposively selected safety net systems. Fifty-two interviews were conducted with project leaders, implementers, and ACS staff. Funded safety net systems were categorized into high-, medium-, and low-performing cases based on the level of EBP implementation. Within- and cross-case analyses were performed to identify CFIR constructs that influenced level of EBP implementation. Of 39 CFIR constructs examined, six distinguished levels of implementation. Two constructs were from the intervention characteristics domain: adaptability and trialability. Three were from the inner setting domain: leadership engagement, tension for change, and access to information and knowledge. Engaging formally appointed internal implementation leaders, from the process domain, also distinguished level of implementation. No constructs from the outer setting or individual characteristics domain differentiated systems by level of implementation. Our study identified a number of influential CFIR constructs and illustrated how they impacted EBP implementation across a variety of safety net systems. Findings may inform future dissemination efforts of EBPs for increasing cancer screening in similar settings. Moreover

Verification and Implementation of Operations Safety Controls for Flight Missions

NASA Technical Reports Server (NTRS)

Jones, Cheryl L.; Smalls, James R.; Carrier, Alicia S.

2010-01-01

Approximately eleven years ago, the International Space Station launched the first module from Russia, the Functional Cargo Block (FGB). Safety and Mission Assurance (S&MA) Operations (Ops) Engineers played an integral part in that endeavor by executing strict flight product verification as well as continued staffing of S&MA's console in the Mission Evaluation Room (MER) for that flight mission. How were these engineers able to conduct such a complicated task? They conducted it based on product verification that consisted of ensuring that safety requirements were adequately contained in all flight products that affected crew safety. S&MA Ops engineers apply both systems engineering and project management principles in order to gain a appropriate level of technical knowledge necessary to perform thorough reviews which cover the subsystem(s) affected. They also ensured that mission priorities were carried out with a great detail and success.

78 FR 65427 - Pipeline Safety: Reminder of Requirements for Liquefied Petroleum Gas and Utility Liquefied...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-31

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2013-0097] Pipeline Safety: Reminder of Requirements for Liquefied Petroleum Gas and Utility Liquefied Petroleum Gas Pipeline Systems AGENCY: Pipeline and Hazardous Materials Safety Administration...

Improving drug safety: From adverse drug reaction knowledge discovery to clinical implementation.

PubMed

Tan, Yuxiang; Hu, Yong; Liu, Xiaoxiao; Yin, Zhinan; Chen, Xue-Wen; Liu, Mei

2016-11-01

Adverse drug reactions (ADRs) are a major public health concern, causing over 100,000 fatalities in the United States every year with an annual cost of $136 billion. Early detection and accurate prediction of ADRs is thus vital for drug development and patient safety. Multiple scientific disciplines, namely pharmacology, pharmacovigilance, and pharmacoinformatics, have been addressing the ADR problem from different perspectives. With the same goal of improving drug safety, this article summarizes and links the research efforts in the multiple disciplines into a single framework from comprehensive understanding of the interactions between drugs and biological system and the identification of genetic and phenotypic predispositions of patients susceptible to higher ADR risks and finally to the current state of implementation of medication-related decision support systems. We start by describing available computational resources for building drug-target interaction networks with biological annotations, which provides a fundamental knowledge for ADR prediction. Databases are classified by functions to help users in selection. Post-marketing surveillance is then introduced where data-driven approach can not only enhance the prediction accuracy of ADRs but also enables the discovery of genetic and phenotypic risk factors of ADRs. Understanding genetic risk factors for ADR requires well organized patient genetics information and analysis by pharmacogenomic approaches. Finally, current state of clinical decision support systems is presented and described how clinicians can be assisted with the integrated knowledgebase to minimize the risk of ADR. This review ends with a discussion of existing challenges in each of disciplines with potential solutions and future directions. Copyright © 2016 Elsevier Inc. All rights reserved.

Radiation safety requirements for radioactive waste management in the framework of a quality management system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Salgado, M.M.; Benitez, J.C.; Pernas, R.

2007-07-01

The Center for Radiation Protection and Hygiene (CPHR) is the institution responsible for the management of radioactive wastes generated from nuclear applications in medicine, industry and research in Cuba. Radioactive Waste Management Service is provided at a national level and it includes the collection and transportation of radioactive wastes to the Centralized Waste Management Facilities, where they are characterized, segregated, treated, conditioned and stored. A Quality Management System, according to the ISO 9001 Standard has been implemented for the RWM Service at CPHR. The Management System includes the radiation safety requirements established for RWM in national regulations and in themore » Licence's conditions. The role of the Regulatory Body and the Radiation Protection Officer in the Quality Management System, the authorization of practices, training and personal qualification, record keeping, inspections of the Regulatory Body and internal inspection of the Radiation Protection Officer, among other aspects, are described in this paper. The Quality Management System has shown to be an efficient tool to demonstrate that adequate measures are in place to ensure the safety in radioactive waste management activities and their continual improvement. (authors)« less

Promoters and Barriers to Implementation of Tracheal Intubation Airway Safety Bundle: A Mixed-Method Analysis.

PubMed

Finn Davis, Katherine; Napolitano, Natalie; Li, Simon; Buffman, Hayley; Rehder, Kyle; Pinto, Matthew; Nett, Sholeen; Jarvis, J Dean; Kamat, Pradip; Sanders, Ronald C; Turner, David A; Sullivan, Janice E; Bysani, Kris; Lee, Anthony; Parker, Margaret; Adu-Darko, Michelle; Giuliano, John; Biagas, Katherine; Nadkarni, Vinay; Nishisaki, Akira

2017-10-01

To describe promoters and barriers to implementation of an airway safety quality improvement bundle from the perspective of interdisciplinary frontline clinicians and ICU quality improvement leaders. Mixed methods. Thirteen PICUs of the National Emergency Airway Registry for Children network. Remote or on-site focus groups with interdisciplinary ICU staff. Two semistructured interviews with ICU quality improvement leaders with quantitative and qualitative data-based feedbacks. Bundle implementation success (compliance) was defined as greater than or equal to 80% use for tracheal intubations for 3 consecutive months. ICUs were classified as early or late adopters. Focus group discussions concentrated on safety concerns and promoters and barriers to bundle implementation. Initial semistructured quality improvement leader interviews assessed implementation tactics and provided recommendations. Follow-up interviews assessed degree of acceptance and changes made after initial interview. Transcripts were thematically analyzed and contrasted by early versus late adopters. Median duration to achieve success was 502 days (interquartile range, 182-781). Five sites were early (median, 153 d; interquartile range, 146-267) and eight sites were late adopters (median, 783 d; interquartile range, 773-845). Focus groups identified common "promoter" themes-interdisciplinary approach, influential champions, and quality improvement bundle customization-and "barrier" themes-time constraints, competing paperwork and quality improvement activities, and poor engagement. Semistructured interviews with quality improvement leaders identified effective and ineffective tactics implemented by early and late adopters. Effective tactics included interdisciplinary quality improvement team involvement (early adopter: 5/5, 100% vs late adopter: 3/8, 38%; p = 0.08); ineffective tactics included physician-only rollouts, lack of interdisciplinary education, lack of data feedback to frontline clinicians

76 FR 3646 - Safety Requirements and Manning Exemption Eligibility on Distant Water Tuna Fleet Vessels

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-20

...Pursuant to Section 904 of the 2010 Coast Guard Authorization Act, the Coast Guard announces the availability of a draft policy regarding distant water tuna fleet vessels manning exemption eligibility and safety requirements. We request your comments on the Safety Requirements and Manning Exemption Eligibility on Distant Water Tuna Fleet Vessels.

Adapting and Implementing an Evidence-Based Sun-Safety Education Program in Rural Idaho, 2012

PubMed Central

Gonzales, Melanie; Krebill, Hope

2014-01-01

Background Melanoma incidence and mortality rates in Idaho are higher than national averages. The importance of increased awareness of skin cancer has been cited by state and local organizations. St. Luke’s Mountain States Tumor Institute (MSTI) prioritized educational outreach efforts to focus on the implementation of a skin cancer prevention program in rural Idaho. Community Context As a community cancer center, MSTI expanded cancer education services to include dedicated support to rural communities. Through this expansion, an MSTI educator sought to partner with a community organization to provide sun-safety education. MSTI selected, adapted, and implemented an evidence-based program, Pool Cool. Methods The education program was implemented in 5 phases. In Phase I, we identified and recruited a community partner; in Phase 2, after thorough research, we selected a program, Pool Cool; in Phase 3, we planned the details of the program, including identification of desired short- and long-term outcomes and adaptation of existing program materials; in Phase 4, we implemented the program in summer 2012; in Phase 5, we assessed program sustainability and expansion. Outcome MSTI developed a sustainable partnership with Payette Municipal Pool, and in summer 2012, we implemented Pool Cool. Sun-safety education was provided to more than 700 young people aged 2 to 17 years, and educational signage and sunscreen benefitted hundreds of additional pool patrons. Interpretation Community cancer centers are increasingly being asked to assess community needs and implement evidence-based prevention and screening programs. Clinical staff may become facilitators of evidence-based public health programs. Challenges of implementing evidence-based programs in the context of a community cancer centers are staffing, leveraging of resources, and ongoing training and support. PMID:24809363

76 FR 62073 - Guidance for Industry on Implementation of the Fee Provisions of the FDA Food Safety...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-06

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2011-D-0721] Guidance for Industry on Implementation of the Fee Provisions of the FDA Food Safety Modernization Act... Administration (FDA) is announcing the availability of a guidance for industry entitled ``Implementation of the...

A Safety and Health Guide for Vocational Educators. Incorporating Requirements of the Occupational Safety and Health Act of 1970, Relevant Pennsylvania Requirements with Particular Emphasis for Those Concerned with Cooperative Education and Work Study Programs. Volume 15. Number 1.

ERIC Educational Resources Information Center

Wahl, Ray

Intended as a guide for vocational educators to incorporate the requirements of the Occupational Safety and Health Act (1970) and the requirements of various Pennsylvania safety and health regulations with their cooperative vocational programs, the first chapter of this document presents the legal implications of these safety and health…

Safety of High Speed Magnetic Levitation Transportation Systems : German High-Speed Maglev Train Safety Requirements - Potential For Application in the United States

DOT National Transportation Integrated Search

1992-02-01

The safety of various magnetically levitated (maglev) trains underdevelopment for possible : implementation in the United States is ofdirect concern to the Federal Railroad Administration (FRA). : This report is the second in a series of reports addr...

[Implementation of good quality and safety practices. Descriptive study in a occupational mutual health centre].

PubMed

Manzanera, R; Plana, M; Moya, D; Ortner, J; Mira, J J

2016-01-01

To describe the level of implementation of quality and safety good practice elements in a Mutual Society health centre. A Cross-sectional study was conducted to assess the level of implementation of good practices using a questionnaire. Some quality dimensions were also assessed (scale 0 to 10) by a set of 87 quality coordinators of health centres and a random sample of 54 healthcare professionals working in small centres. Seventy quality coordinators and 27 professionals replied (response rates 80% and 50%, respectively. There were no differences in the assessment of quality attributes between both groups. They identified as areas for improvement: use of practice guidelines (7.6/10), scientific and technical skills (7.5/10), and patient satisfaction (7.7/10). Availability and accessibility to clinical reports, informed consent, availability of hydro-alcoholic solution, and to record allergies, were considered of high importance to be implemented, with training and research, improvements in equipment and technology plans, adherence to clinical practice guidelines and the preparation of risk maps, being of less importance. The good practices related to equipment and resources have a higher likelihood to be implemented, meanwhile those related to quality and safety attitudes have more barriers before being implemented. The mutual has a similar behaviour than other healthcare institutions. Copyright © 2015 SECA. Published by Elsevier Espana. All rights reserved.

Manned space flight nuclear system safety. Voluem 5: Nuclear system safety guidelines. Part 2: Space shuttle/nuclear payloads safety

NASA Technical Reports Server (NTRS)

1972-01-01

The design and operations guidelines and requirements developed in the study of space shuttle nuclear system transportation are presented. Guidelines and requirements are presented for the shuttle, nuclear payloads (reactor, isotope-Brayton and small isotope sources), ground support systems and facilities. Cross indices and references are provided which relate guidelines to each other, and to substantiating data in other volumes. The guidelines are intended for the implementation of nuclear safety related design and operational considerations in future space programs.

77 FR 2126 - Pipeline Safety: Implementation of the National Registry of Pipeline and Liquefied Natural Gas...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-13

... Natural Gas Operators AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No...: ``Pipeline Safety: Updates to Pipeline and Liquefied Natural Gas Reporting Requirements.'' The final rule...

Dissemination and Implementation Research for Occupational Safety and Health.

PubMed

Dugan, Alicia G; Punnett, Laura

2017-12-01

The translation of evidence-based health innovations into real-world practice is both incomplete and exceedingly slow. This represents a poor return on research investment dollars for the general public. U.S. funders of health sciences research (e.g., NIH, CDC, NIOSH) are increasingly calling for dissemination plans, and to a lesser extent for dissemination and implementation (D&I) research, which are studies that examine the effectiveness of D&I efforts and strategies and the predictors of D&I success. For example, rather than merely broadcasting information about a preventable hazard, D&I research in occupational safety and health (OSH) might examine how employers or practitioners are most likely to receive and act upon that information. We propose here that D&I research should be seen as a dedicated and necessary area of study within OSH, as a way to generate new knowledge that can bridge the research-to-practice gap. We present D&I concepts, frameworks, and examples that can increase the capacity of OSH professionals to conduct D&I research and accelerate the translation of research findings into meaningful everyday practice to improve worker safety and health.

Expected Safety Benefits Of Implementing Intelligent Transportation Systems In Virginia: A Synthesis Of The Literature

DOT National Transportation Integrated Search

1998-07-01

The purpose of this study was to identify, through a literature review, the potential safety benefits of implementing various Intelligent Transportation System (ITS) technologies through Virginia's Smart Travel Program. This study was requested by th...

Implementation intentions and colorectal screening: a randomized trial in safety-net clinics.

PubMed

Greiner, K Allen; Daley, Christine M; Epp, Aaron; James, Aimee; Yeh, Hung-Wen; Geana, Mugur; Born, Wendi; Engelman, Kimberly K; Shellhorn, Jeremy; Hester, Christina M; LeMaster, Joseph; Buckles, Daniel C; Ellerbeck, Edward F

2014-12-01

Low-income and racial/ethnic minority populations experience disproportionate colorectal cancer (CRC) burden and poorer survival. Novel behavioral strategies are needed to improve screening rates in these groups. The study aimed to test a theoretically based "implementation intentions" intervention for improving CRC screening among unscreened adults in urban safety-net clinics. Randomized controlled trial. Adults (N=470) aged ≥50 years, due for CRC screening, from urban safety-net clinics were recruited. The intervention (conducted in 2009-2011) was delivered via touchscreen computers that tailored informational messages to decisional stage and screening barriers. The computer then randomized participants to generic health information on diet and exercise (Comparison group) or "implementation intentions" questions and planning (Experimental group) specific to the CRC screening test chosen (fecal immunochemical test or colonoscopy). The primary study outcome was completion of CRC screening at 26 weeks based on test reports (analysis conducted in 2012-2013). The study population had a mean age of 57 years and was 42% non-Hispanic African American, 28% non-Hispanic white, and 27% Hispanic. Those receiving the implementation intentions-based intervention had higher odds (AOR=1.83, 95% CI=1.23, 2.73) of completing CRC screening than the Comparison group. Those with higher self-efficacy for screening (AOR=1.57, 95% CI=1.03, 2.39), history of asthma (AOR=2.20, 95% CI=1.26, 3.84), no history of diabetes (AOR=1.86, 95% CI=1.21, 2.86), and reporting they had never heard that "cutting on cancer" makes it spread (AOR=1.78, 95% CI=1.16, 2.72) were more likely to complete CRC screening. The results of this study suggest that programs incorporating an implementation intentions approach can contribute to successful completion of CRC screening even among very low-income and diverse primary care populations. Future initiatives to reduce CRC incidence and mortality disparities may

75 FR 74022 - Safety Analysis Requirements for Defining Adequate Protection for the Public and the Workers

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-30

... DEFENSE NUCLEAR FACILITIES SAFETY BOARD [Recommendation 2010-1] Safety Analysis Requirements for Defining Adequate Protection for the Public and the Workers AGENCY: Defense Nuclear Facilities Safety Board... Nuclear Facilities Safety Board has made a recommendation to the Secretary of Energy requesting an...

10 CFR 73.58 - Safety/security interface requirements for nuclear power reactors.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Safety/security interface requirements for nuclear power reactors. 73.58 Section 73.58 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PHYSICAL PROTECTION OF... requirements for nuclear power reactors. (a) Each operating nuclear power reactor licensee with a license...

10 CFR 73.58 - Safety/security interface requirements for nuclear power reactors.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 2 2013-01-01 2013-01-01 false Safety/security interface requirements for nuclear power reactors. 73.58 Section 73.58 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PHYSICAL PROTECTION OF... requirements for nuclear power reactors. (a) Each operating nuclear power reactor licensee with a license...

10 CFR 73.58 - Safety/security interface requirements for nuclear power reactors.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 2 2014-01-01 2014-01-01 false Safety/security interface requirements for nuclear power reactors. 73.58 Section 73.58 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PHYSICAL PROTECTION OF... requirements for nuclear power reactors. (a) Each operating nuclear power reactor licensee with a license...

10 CFR 73.58 - Safety/security interface requirements for nuclear power reactors.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 2 2011-01-01 2011-01-01 false Safety/security interface requirements for nuclear power reactors. 73.58 Section 73.58 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PHYSICAL PROTECTION OF... requirements for nuclear power reactors. (a) Each operating nuclear power reactor licensee with a license...

10 CFR 73.58 - Safety/security interface requirements for nuclear power reactors.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 2 2012-01-01 2012-01-01 false Safety/security interface requirements for nuclear power reactors. 73.58 Section 73.58 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PHYSICAL PROTECTION OF... requirements for nuclear power reactors. (a) Each operating nuclear power reactor licensee with a license...

Facilitators and barriers for the adoption, implementation and monitoring of child safety interventions: a multinational qualitative analysis.

PubMed

Scholtes, Beatrice; Schröder-Bäck, Peter; MacKay, J Morag; Vincenten, Joanne; Förster, Katharina; Brand, Helmut

2017-06-01

The efficiency and effectiveness of child safety interventions are determined by the quality of the implementation process. This multinational European study aimed to identify facilitators and barriers for the three phases of implementation: adoption, implementation and monitoring (AIM process). Twenty-seven participants from across the WHO European Region were invited to provide case studies of child safety interventions from their country. Cases were selected by the authors to ensure broad coverage of injury issues, age groups and governance level of implementation (eg, national, regional or local). Each participant presented their case and provided a written account according to a standardised template. Presentations and question and answer sessions were recorded. The presentation slides, written accounts and the notes taken during the workshops were analysed using thematic content analysis to elicit facilitators and barriers. Twenty-six cases (from 26 different countries) were presented and analysed. Facilitators and barriers were identified within eight general themes, applicable across the AIM process: management and collaboration; resources; leadership; nature of the intervention; political, social and cultural environment; visibility; nature of the injury problem and analysis and interpretation. The importance of the quality of the implementation process for intervention effectiveness, coupled with limited resources for child safety makes it more difficult to achieve successful actions. The findings of this study, divided by phase of the AIM process, provide practitioners with practical suggestions, where proactive planning might help increase the likelihood of effective implementation. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

The Attitude of Construction Workers toward the Implementation of Occupational Health and Safety (OHS)

NASA Astrophysics Data System (ADS)

Widaningsih, L.; Susanti, I.; Chandra, T.

2018-02-01

Construction industry refers to one of the industries dealing with high accident rate. Besides its outdoor workplace involving many workers who usually work manually, the workers’ work culture and less awareness of occupational health and safety (OHS) are attributed to the high accident rate. This study explores some construction workers who are involved in some construction projects in big cities such as Bandung and Jakarta. The questionnaire-given to the construction workers focusing on stone construction, wood construction, and finishing session-reveals that the construction workers knowledge and understanding of nine Occupational Health and Safety (OHS) aspects reach above 50%. However, does not appear to reflect their knowledge and understanding of Occupational Health and Safety (OHS). The results of Focus Group Discussion (FGD) and an in-depth interview show that the fallacious implementation of Occupational Health and Safety (OHS) is attributed to their traditional “work culture”.

Implementing the 2009 Institute of Medicine recommendations on resident physician work hours, supervision, and safety

PubMed Central

Blum, Alexander B; Shea, Sandra; Czeisler, Charles A; Landrigan, Christopher P; Leape, Lucian

2011-01-01

, discussion of the Institute of Medicine report has been largely confined to the medical education community, led by the Accreditation Council for Graduate Medical Education (ACGME). To begin gathering these perspectives and developing a plan to implement safer work hours for resident physicians, a conference entitled “Enhancing sleep, supervision and safety: What will it take to implement the Institute of Medicine recommendations?” was held at Harvard Medical School on June 17–18, 2010. This White Paper is a product of a diverse group of 26 representative stakeholders bringing relevant new information and innovative practices to bear on a critical patient safety problem. Given that our conference included experts from across disciplines with diverse perspectives and interests, not every recommendation was endorsed by each invited conference participant. However, every recommendation made here was endorsed by the majority of the group, and many were endorsed unanimously. Conference members participated in the process, reviewed the final product, and provided input before publication. Participants provided their individual perspectives, which do not necessarily represent the formal views of any organization. In September 2010 the ACGME issued new rules to go into effect on July 1, 2011. Unfortunately, they stop considerably short of the Institute of Medicine’s recommendations and those endorsed by this conference. In particular, the ACGME only applied the limitation of 16 hours to first-year resident physicans. Thus, it is clear that policymakers, hospital administrators, and residency program directors who wish to implement safer health care systems must go far beyond what the ACGME will require. We hope this White Paper will serve as a guide and provide encouragement for that effort. Resident physician workload and supervision By the end of training, a resident physician should be able to practice independently. Yet much of resident physicians’ time is dominated by

Safety of phase I clinical trials with monoclonal antibodies in Germany--the regulatory requirements viewed in the aftermath of the TGN1412 disaster.

PubMed

Liedert, B; Bassus, S; Schneider, C K; Kalinke, U; Löwer, J

2007-01-01

This review summarizes scientific, ethical and regulatory aspects of Phase I clinical trials with monoclonal antibodies. The current standard requirements for pre-clinical testing and for clinical study design are presented. The scientific considerations discussed herein are generally applicable, the view on legal requirements for clinical trials refer to the German jurisdiction only. The adverse effects associated with the TGN1412 Phase I trial indicate that the predictive value of pre-clinical animal models requires reevaluation and that, in certain cases, some issues of clinical trial protocols such as dose fixing may need refinement or redesign. Concrete safety measures, which have been proposed as a consequence of the TGN1412 event include introduction of criteria for high-risk antibodies, sequential inclusion of trial participants and implementation of pre-Phase I studies where dose calculation is based on the pre-clinical No Effect Level instead of the No Observed Adverse Effect Level. The recently established European clinical trials database (EUDRACT Database) is a further safety tool to expedite the sharing of relevant information between scientific authorities.

75 FR 69648 - Safety Analysis Requirements for Defining Adequate Protection for the Public and the Workers

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-15

... DEFENSE NUCLEAR FACILITIES SAFETY BOARD [Recommendation 2010-1] Safety Analysis Requirements for Defining Adequate Protection for the Public and the Workers AGENCY: Defense Nuclear Facilities Safety Board... Facilities Safety Board has made a recommendation to the Secretary of Energy requesting an amendment to the...

46 CFR 53.05-1 - Safety valve requirements for steam boilers (modifies HG-400 and HG-401).

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Safety valve requirements for steam boilers (modifies HG... requirements for steam boilers (modifies HG-400 and HG-401). (a) The pressure relief valve requirements and the safety valve requirements for steam boilers must be as indicated in HG-400 and HG-401 of section IV of...

Implementation of Water Safety Plans (WSPs): A Case Study in the Coastal Area in Semarang City, Indonesia

NASA Astrophysics Data System (ADS)

Budiyono; Ginandjar, P.; Saraswati, L. D.; Pangestuti, D. R.; Martini; Jati, S. P.

2018-02-01

An area of 508.28 hectares in North Semarang is flooded by tidal inundation, including Bandarharjo village, which could affect water quality in the area. People in Bandarharjo use safe water from deep groundwater, without disinfection process. More than 90% of water samples in the Bandaharjo village had poor bacteriological quality. The aimed of the research was to describe the implementation of Water Safety Plans (WSPs) program in Bandarharjo village. This was a descriptive study with steps for implementations adopted the guidelines and tools of the World Health Organization. The steps consist of introducing WSPs program, team building, training the team, examination of water safety before risk assessment, risk assessment, minor repair I, examination of water safety risk, minor repair II (after monitoring). Data were analyzed using descriptive methods. WSPs program has been introduced and formed WSPs team, and the training of the team has been conducted. The team was able to conduct risks assessment, planned the activities, examined water quality, conduct minor repair and monitoring at the source, distribution, and households connection. The WSPs program could be implemented in the coastal area in Semarang, however regularly supervision and some adjustment are needed.

Community, intervention and provider support influences on implementation: reflections from a South African illustration of safety, peace and health promotion.

PubMed

van Niekerk, Ashley; Seedat, Mohamed; Kramer, Sherianne; Suffla, Shahnaaz; Bulbulia, Samed; Ismail, Ghouwa

2014-01-01

The development, implementation and evaluation of community interventions are important for reducing child violence and injuries in low- to middle-income contexts, with successful implementation critical to effective intervention outcomes. The assessment of implementation processes is required to identify the factors that influence effective implementation. This article draws on a child safety, peace and health initiative to examine key factors that enabled or hindered its implementation, in a context characterised by limited resources. A case study approach was employed. The research team was made up of six researchers and intervention coordinators, who led the development and implementation of the Ukuphepha Child Study in South Africa, and who are also the authors of this article. The study used author observations, reflections and discussions of the factors perceived to influence the implementation of the intervention. The authors engaged in an in-depth and iterative dialogic process aimed at abstracting the experiences of the intervention, with a recursive cycle of reflection and dialogue. Data were analysed utilising inductive content analysis, and categorised using classification frameworks for understanding implementation. The study highlights key factors that enabled or hindered implementation. These included the community context and concomitant community engagement processes; intervention compatibility and adaptability issues; community service provider perceptions of intervention relevance and expectations; and the intervention support system, characterised by training and mentorship support. This evaluation illustrated the complexity of intervention implementation. The study approach sought to support intervention fidelity by fostering and maintaining community endorsement and support, a prerequisite for the unfolding implementation of the intervention.

Community, intervention and provider support influences on implementation: reflections from a South African illustration of safety, peace and health promotion

PubMed Central

2014-01-01

Background The development, implementation and evaluation of community interventions are important for reducing child violence and injuries in low- to middle-income contexts, with successful implementation critical to effective intervention outcomes. The assessment of implementation processes is required to identify the factors that influence effective implementation. This article draws on a child safety, peace and health initiative to examine key factors that enabled or hindered its implementation, in a context characterised by limited resources. Methods A case study approach was employed. The research team was made up of six researchers and intervention coordinators, who led the development and implementation of the Ukuphepha Child Study in South Africa, and who are also the authors of this article. The study used author observations, reflections and discussions of the factors perceived to influence the implementation of the intervention. The authors engaged in an in-depth and iterative dialogic process aimed at abstracting the experiences of the intervention, with a recursive cycle of reflection and dialogue. Data were analysed utilising inductive content analysis, and categorised using classification frameworks for understanding implementation. Results The study highlights key factors that enabled or hindered implementation. These included the community context and concomitant community engagement processes; intervention compatibility and adaptability issues; community service provider perceptions of intervention relevance and expectations; and the intervention support system, characterised by training and mentorship support. Conclusions This evaluation illustrated the complexity of intervention implementation. The study approach sought to support intervention fidelity by fostering and maintaining community endorsement and support, a prerequisite for the unfolding implementation of the intervention. PMID:25081088

Responsibility for the Violation of Ecological Safety Requirements

NASA Astrophysics Data System (ADS)

Selivanovskaya, J. I.; Gilmutdinova, I.

2018-01-01

The article deals with the problems of responsibility for the violation of ecological safety requirements from the point of view of sustainable development of the state. Such types of responsibility as property, disciplinary, financial, administrative and criminal responsibility in the area are analysed. Suggestions on the improvement of legislation are put forward. Among other things it is suggested to introduce criminal sanctions against legal bodies (enterprises) for ecological crimes with punishments in the form of fines, suspension or discontinuation of activities.

Expected safety benefits of implementing Intelligent Transportation Systems in Virginia : a synthesis of the literature.

DOT National Transportation Integrated Search

1998-01-01

The purpose of this study was to identify, through a literature review, the potential safety benefits of implementing various ITS technologies through Virginia's Smart Travel Program. This study was requested by the ITS Section of the Virginia Depart...

32 CFR 643.22 - Policy-Public safety: Requirement for early identification of lands containing dangerous materials.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 4 2010-07-01 2010-07-01 true Policy-Public safety: Requirement for early identification of lands containing dangerous materials. 643.22 Section 643.22 National Defense Department of...—Public safety: Requirement for early identification of lands containing dangerous materials. (a) DA will...

32 CFR 643.22 - Policy-Public safety: Requirement for early identification of lands containing dangerous materials.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 4 2011-07-01 2011-07-01 false Policy-Public safety: Requirement for early identification of lands containing dangerous materials. 643.22 Section 643.22 National Defense Department of...—Public safety: Requirement for early identification of lands containing dangerous materials. (a) DA will...

77 FR 63245 - Rules of Practice in Air Safety Proceedings; Rules Implementing the Equal Access to Justice Act...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-16

... of Practice in Air Safety Proceedings; Rules Implementing the Equal Access to Justice Act of 1980... procedure concerning applications for fees and expenses under the Equal Access to Justice Act of 1980 (EAJA... procedure, Airmen, Aviation safety. 49 CFR Part 826 Claims, Equal access to justice, Lawyers. For the...

Engineering and Safety Partnership Enhances Safety of the Space Shuttle Program (SSP)

NASA Technical Reports Server (NTRS)

Duarte, Alberto

2007-01-01

Project Management must use the risk assessment documents (RADs) as tools to support their decision making process. Therefore, these documents have to be initiated, developed, and evolved parallel to the life of the project. Technical preparation and safety compliance of these documents require a great deal of resources. Updating these documents after-the-fact not only requires substantial increase in resources - Project Cost -, but this task is also not useful and perhaps an unnecessary expense. Hazard Reports (HRs), Failure Modes and Effects Analysis (FMEAs), Critical Item Lists (CILs), Risk Management process are, among others, within this category. A positive action resulting from a strong partnership between interested parties is one way to get these documents and related processes and requirements, released and updated in useful time. The Space Shuttle Program (SSP) at the Marshall Space Flight Center has implemented a process which is having positive results and gaining acceptance within the Agency. A hybrid Panel, with equal interest and responsibilities for the two larger organizations, Safety and Engineering, is the focal point of this process. Called the Marshall Safety and Engineering Review Panel (MSERP), its charter (Space Shuttle Program Directive 110 F, April 15, 2005), and its Operating Control Plan emphasizes the technical and safety responsibilities over the program risk documents: HRs; FMEA/CILs; Engineering Changes; anomalies/problem resolutions and corrective action implementations, and trend analysis. The MSERP has undertaken its responsibilities with objectivity, assertiveness, dedication, has operated with focus, and has shown significant results and promising perspectives. The MSERP has been deeply involved in propulsion systems and integration, real time technical issues and other relevant reviews, since its conception. These activities have transformed the propulsion MSERP in a truly participative and value added panel, making a

76 FR 10524 - Federal Motor Vehicle Safety Standards, Ejection Mitigation; Phase-In Reporting Requirements...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-25

... DEPARTMENT OF TRANSPORTATION National Highway Traffic Safety Administration 49 CFR Parts 571 and 585 [Docket No. NHTSA-2011-0004] RIN 2127-AK23 Federal Motor Vehicle Safety Standards, Ejection Mitigation; Phase-In Reporting Requirements; Incorporation by Reference Correction In rule document 2011-547...

Safe use of vaccines and vaccine compliance with food safety requirements.

PubMed

Grein, K; Papadopoulos, O; Tollis, M

2007-08-01

Advanced technologies and regulatory regimes have contributed to the availability of veterinary vaccines that have high quality and favourable safety profiles in terms of potential risks posed to the target animals, the persons who come into contact with the vaccine, the consumers of food derived from vaccinated animals and the environment. The authorisation process requires that a range of safety studies are provided to evaluate the products. The design and production of vaccines, and their safe use, are primarily assessed by using data gathered from extensive pre-marketing studies performed on target animals and specific quality tests. The current post-marketing safeguards include good manufacturing practices, batch safety testing, inspections and pharmacovigilance. In addition to hazard identification, a full benefit/risk evaluation needs to be undertaken. The outcome of that evaluation will determine options for risk management and affect regulatory decisions on the safety of the vaccine; options might, for example, include special warnings on package inserts and labels.

30 CFR 250.405 - What are the safety requirements for diesel engines used on a drilling rig?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What are the safety requirements for diesel... Gas Drilling Operations General Requirements § 250.405 What are the safety requirements for diesel engines used on a drilling rig? You must equip each diesel engine with an air take device to shut down the...

77 FR 47530 - Approval and Promulgation of State Implementation Plans; Hawaii; Infrastructure Requirements for...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-09

... Promulgation of State Implementation Plans; Hawaii; Infrastructure Requirements for the 1997 8-Hour Ozone and... State Implementation Plan (SIP) revision submitted by the state of Hawaii pursuant to the requirements... FURTHER INFORMATION CONTACT: Dawn Richmond, Air Planning Office (AIR-2), U.S. Environmental Protection...

Implementing technology to improve medication safety in healthcare facilities: a literature review.

PubMed

Hidle, Unn

Medication errors remain one of the most common causes of patient injuries in the United States, with detrimental outcomes including adverse reactions and even death. By developing a better understanding of why and how medication errors occur, preventative measures may be implemented including technological advances. In this literature review, potential methods of reducing medication errors were explored. Furthermore, technology tools available for medication orders and administration are described, including advantages and disadvantages of each system. It was found that technology can be an excellent aid in improving safety of medication administration. However, computer technology cannot replace human intellect and intuition. Nurses should be involved when implementing any new computerized system in order to obtain the most appropriate and user-friendly structure.

33 CFR 149.696 - What are the requirements for a helicopter landing deck safety net?

Code of Federal Regulations, 2013 CFR

2013-07-01

... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false What are the requirements for a helicopter landing deck safety net? 149.696 Section 149.696 Navigation and Navigable Waters COAST GUARD... helicopter landing deck safety net? A helicopter landing deck safety net must comply with 46 CFR 108.235...

33 CFR 149.696 - What are the requirements for a helicopter landing deck safety net?

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false What are the requirements for a helicopter landing deck safety net? 149.696 Section 149.696 Navigation and Navigable Waters COAST GUARD... helicopter landing deck safety net? A helicopter landing deck safety net must comply with 46 CFR 108.235...

33 CFR 149.696 - What are the requirements for a helicopter landing deck safety net?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false What are the requirements for a helicopter landing deck safety net? 149.696 Section 149.696 Navigation and Navigable Waters COAST GUARD... helicopter landing deck safety net? A helicopter landing deck safety net must comply with 46 CFR 108.235...

33 CFR 149.696 - What are the requirements for a helicopter landing deck safety net?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false What are the requirements for a helicopter landing deck safety net? 149.696 Section 149.696 Navigation and Navigable Waters COAST GUARD... helicopter landing deck safety net? A helicopter landing deck safety net must comply with 46 CFR 108.235...

33 CFR 149.696 - What are the requirements for a helicopter landing deck safety net?

Code of Federal Regulations, 2014 CFR

2014-07-01

... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false What are the requirements for a helicopter landing deck safety net? 149.696 Section 149.696 Navigation and Navigable Waters COAST GUARD... helicopter landing deck safety net? A helicopter landing deck safety net must comply with 46 CFR 108.235...

[Qualitative evaluation of employer requirements associated with occupational health and safety as good practice in small-scale enterprises].

PubMed

Kuroki, Naomi; Miyashita, Nana; Hino, Yoshiyuki; Kayashima, Kotaro; Fujino, Yoshihisa; Takada, Mikio; Nagata, Tomohisa; Yamataki, Hajime; Sakuragi, Sonoko; Kan, Hirohiko; Morita, Tetsuya; Ito, Akiyoshi; Mori, Koji

2009-09-01

The purpose of this study was to identify what motivates employers to promote good occupational health and safety practices in small-scale enterprises. Previous studies have shown that small-scale enterprises generally pay insufficient attention to issues of occupational health and safety. These findings were mainly derived from questionnaire based surveys. Nevertheless, some small-scale enterprises in which employers exercise good leadership do take a progressive approach to occupational health and safety. Although good practices can be identified in small-scale enterprises, it remains unclear what motivates employers in small-scale enterprises to actively implement occupational health and safety practices. We speculated that identifying employer motivations in promoting occupational health would help to spread good practices among small-scale enterprises. Using a qualitative approach based on the KJ methods, we interviewed ten employers who actively promote occupational health and safety in the workplace. The employers were asked to discuss their views of occupational health and safety in their own words. A semi-structured interview format was used, and transcripts were made of the interviews. Each transcript was independently coded by two or more researchers. These transcripts and codes were integrated and then the research group members discussed the heading titles and structural relationships between them according to the KJ method. Qualitative analysis revealed that all the employers expressed a strong interest in a "good company" and "good management". They emphasized four elements of "good management", namely "securing human resources", "trust of business partners", "social responsibility" and "employer's health condition itself", and considered that addressing occupational health and safety was essential to the achievement of these four elements. Consistent with previous findings, the results showed that implementation of occupational health and safety

78 FR 42889 - Pipeline Safety: Reminder of Requirements for Utility LP-Gas and LPG Pipeline Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-18

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part 192 [Docket No. PHMSA-2013-0097] Pipeline Safety: Reminder of Requirements for Utility LP-Gas and LPG Pipeline Systems AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION...

Governing patient safety: lessons learned from a mixed methods evaluation of implementing a ward-level medication safety scorecard in two English NHS hospitals.

PubMed

Ramsay, Angus I G; Turner, Simon; Cavell, Gillian; Oborne, C Alice; Thomas, Rebecca E; Cookson, Graham; Fulop, Naomi J

2014-02-01

Relatively little is known about how scorecards presenting performance indicators influence medication safety. We evaluated the effects of implementing a ward-level medication safety scorecard piloted in two English NHS hospitals and factors influencing these. We used a mixed methods, controlled before and after design. At baseline, wards were audited on medication safety indicators; during the 'feedback' phase scorecard results were presented to intervention wards on a weekly basis over 7 weeks. We interviewed 49 staff, including clinicians and managers, about scorecard implementation. At baseline, 18.7% of patients (total n=630) had incomplete allergy documentation; 53.4% of patients (n=574) experienced a drug omission in the preceding 24 h; 22.5% of omitted doses were classified as 'critical'; 22.1% of patients (n=482) either had ID wristbands not reflecting their allergy status or no ID wristband; and 45.3% of patients (n=237) had drugs that were either unlabelled or labelled for another patient in their drug lockers. The quantitative analysis found no significant improvement in intervention wards following scorecard feedback. Interviews suggested staff were interested in scorecard feedback and described process and culture changes. Factors influencing scorecard implementation included 'normalisation' of errors, study duration, ward leadership, capacity to engage and learning preferences. Presenting evidence-based performance indicators may potentially influence staff behaviour. Several practical and cultural factors may limit feedback effectiveness and should be considered when developing improvement interventions. Quality scorecards should be designed with care, attending to evidence of indicators' effectiveness and how indicators and overall scorecard composition fit the intended audience.

Safety-related requirements for photovoltaic modules and arrays. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levins, A.

1984-03-01

Underwriters Laboratories has conducted a study to identify and develop safety requirements for photovoltaic module and panel designs and configurations for residential, intermediate, and large scale applications. Concepts for safety systems, where each system is a collection of subsystems which together address the total anticipated hazard situation, are described. Descriptions of hardware, and system usefulness and viability are included. This discussion of safety systems recognizes that there is little history on which to base the expected safety related performance of a photovoltaic system. A comparison of these systems, as against the provisions of the 1984 National Electrical Code covering photovoltaicmore » systems is made. A discussion of the UL investigation of the photovoltaic module evaluated to the provisions of the Proposed UL Standard for Flat-Plate Photovoltaic Modules and Panels is included. Grounding systems, their basis and nature, and the advantages and disadvantages of each are described. The meaning of frame grounding, circuit grounding, and the type of circuit ground are covered. The development of the Standard for Flat-Plate Photovoltaic Modules and Panels has continued, and with both industry comment and a product submittal and listing, the Standard has been refined to a viable document allowing an objective safety review of photovoltaic modules and panels. How this document, and other UL documents would cover investigations of certain other photovoltaic system components is described.« less

Implementation of ASME Code, Section XI, Code Case N-770, on Alternative Examination Requirements for Class 1 Butt Welds Fabricated with Alloy 82/182

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sullivan, Edmund J.; Anderson, Michael T.

In May 2010, the NRC issued a proposed notice of rulemaking that includes a provision to add a new section to its rules to require licensees to implement ASME Code Case N-770, ‘‘Alternative Examination Requirements and Acceptance Standards for Class 1 PWR Piping and Vessel Nozzle Butt Welds Fabricated with UNS N06082 or UNS W86182 Weld Filler Material With or Without the Application of Listed Mitigation Activities, Section XI, Division 1,’’ with 15 conditions. Code Case N-770 contains baseline and inservice inspection (ISI) requirements for unmitigated butt welds fabricated with Alloy 82/182 material and preservice and ISI requirements for mitigatedmore » butt welds. The NRC stated that application of ASME Code Case N-770 is necessary because the inspections currently required by the ASME Code, Section XI, were not written to address stress corrosion cracking Alloy 82/182 butt welds, and the safety consequences of inadequate inspections can be significant. The NRC expects to issue the final rule incorporating this code case into its regulations in the spring 2011 time frame. This paper discusses the new examination requirements, the conditions that NRC is imposing , and the major concerns with implementation of the new Code Case.« less

33 CFR 150.601 - What are the safety and health requirements for the workplace on a deepwater port?

Code of Federal Regulations, 2010 CFR

2010-07-01

... requirements for the workplace on a deepwater port? 150.601 Section 150.601 Navigation and Navigable Waters... Workplace Safety and Health Safety and Health (general) § 150.601 What are the safety and health requirements for the workplace on a deepwater port? (a) Each operator of a deepwater port must ensure that the...

Assessment of documentation requirements under DOE 5481. 1, Safety Analysis and Review System (SARS)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Browne, E.T.

1981-03-01

This report assesses the requirements of DOE Order 5481.1, Safety Analysis and Review System for DOE Operations (SARS) in regard to maintaining SARS documentation. Under SARS, all pertinent details of the entire safety analysis and review process for each DOE operation are to be traceable from the initial identification of a hazard. This report is intended to provide assistance in identifying the points in the SARS cycle at which documentation is required, what type of documentation is most appropriate, and where it ultimately should be maintained.

NASA Requirements for Ground-Based Pressure Vessels and Pressurized Systems (PVS). Revision C

NASA Technical Reports Server (NTRS)

Greulich, Owen Rudolf

2017-01-01

The purpose of this document is to ensure the structural integrity of PVS through implementation of a minimum set of requirements for ground-based PVS in accordance with this document, NASA Policy Directive (NPD) 8710.5, NASA Safety Policy for Pressure Vessels and Pressurized Systems, NASA Procedural Requirements (NPR) 8715.3, NASA General Safety Program Requirements, applicable Federal Regulations, and national consensus codes and standards (NCS).

An empirical survey of the benefits of implementing pay for safety scheme (PFSS) in the Hong Kong construction industry.

PubMed

Chan, Daniel W M; Chan, Albert P C; Choi, Tracy N Y

2010-10-01

The Government of the Hong Kong Special Administrative Region (SAR) has implemented different safety initiatives to improve the safety performance of the construction industry over the past decades. The Pay for Safety Scheme (PFSS), which is one of the effective safety measures launched by the government in 1996, has been widely adopted in the public works contracts. Both the accident rate and fatality rate of public sector projects have decreased noticeably over this period. This paper aims to review the current state of application of PFSS in Hong Kong, and attempts to identify and analyze the perceived benefits of PFSS in construction via an industry-wide empirical questionnaire survey. A total of 145 project participants who have gained abundant hands-on experience with the PFSS construction projects were requested to complete a survey questionnaire to indicate the relative importance of those benefits identified in relation to PFSS. The perceived benefits were measured and ranked from the perspectives of the client and contractor for crosscomparison. The survey findings suggested the most significant benefits derived from adopting PFSS were: (a) Increased safety training; (b) Enhanced safety awareness; (c) Encouragement of developing safety management system; and (d) Improved safety commitment. A wider application of PFSS should be advocated so as to achieve better safety performance within the construction industry. It is recommended that a similar scheme to the PFSS currently adopted in Hong Kong may be developed for implementation in other regions or countries for international comparisons. Copyright © 2010 Elsevier Ltd and National Safety Council. All rights reserved.

Improving radiopharmaceutical supply chain safety by implementing bar code technology.

PubMed

Matanza, David; Hallouard, François; Rioufol, Catherine; Fessi, Hatem; Fraysse, Marc

2014-11-01

The aim of this study was to describe and evaluate an approach for improving radiopharmaceutical supply chain safety by implementing bar code technology. We first evaluated the current situation of our radiopharmaceutical supply chain and, by means of the ALARM protocol, analysed two dispensing errors that occurred in our department. Thereafter, we implemented a bar code system to secure selected key stages of the radiopharmaceutical supply chain. Finally, we evaluated the cost of this implementation, from overtime, to overheads, to additional radiation exposure to workers. An analysis of the events that occurred revealed a lack of identification of prepared or dispensed drugs. Moreover, the evaluation of the current radiopharmaceutical supply chain showed that the dispensation and injection steps needed to be further secured. The bar code system was used to reinforce product identification at three selected key stages: at usable stock entry; at preparation-dispensation; and during administration, allowing to check conformity between the labelling of the delivered product (identity and activity) and the prescription. The extra time needed for all these steps had no impact on the number and successful conduct of examinations. The investment cost was reduced (2600 euros for new material and 30 euros a year for additional supplies) because of pre-existing computing equipment. With regard to the radiation exposure to workers there was an insignificant overexposure for hands with this new organization because of the labelling and scanning processes of radiolabelled preparation vials. Implementation of bar code technology is now an essential part of a global securing approach towards optimum patient management.

78 FR 67326 - Safety and Environmental Management System Requirements for Vessels on the U.S. Outer Continental...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-12

... 1625-AC05 Safety and Environmental Management System Requirements for Vessels on the U.S. Outer... ``Safety and Environmental Management System Requirements for Vessels on the U.S. Outer Continental Shelf... of industry to ensure stakeholders have adequate time to submit complete responses. DATES: Comments...

Implementation of a "No Fly" safety culture in a multicenter radiation medicine department.

PubMed

Potters, Louis; Kapur, Ajay

2012-01-01

The safe delivery of radiation therapy requires multiple disciplines and interactions to perform flawlessly for each patient. Because treatment is individualized and every aspect of the patient's care is unique, it is difficult to regiment a delivery process that works flawlessly. The purpose of this study is to describe one safety-directed component of our quality program called the "No Fly Policy" (NFP). Our quality assurance program for radiation therapy reviewed the entire process of care prior, during, and after a patient's treatment course. Each component of care was broken down and rebuilt within a matrix of multidisciplinary safety quality checklists (QCL). The QCL process map was subsequently streamlined with revised task due dates and stopping rules. The NFP was introduced to place a holding pattern on treatment initiation pending reconciliation of associated stopping events. The NFP was introduced in a pilot phase using a Six-Sigma process improvement approach. Quantitative analysis on the performance of the new QCLs was performed using crystal reports in the Oncology Information Systems. Root cause analysis was conducted. Notable improvements in QCL performance were observed. The variances among staff in completing tasks reduced by a factor of at least 3, suggesting better process control. Steady improvements over time indicated an increasingly compliant and controlled adoption of the new safety-oriented process map. Stopping events led to rescheduling treatments with average and maximum delays of 2 and 4 days, respectively, with no reported adverse effects. The majority of stopping events were due to incomplete plan approvals stemming from treatment planning delays. Whereas these may have previously solicited last-minute interventions, including intensity modulated radiation therapy quality assurance, the NFP enabled nonpunitive, reasonable schedule adjustments to mitigate compromises in safe delivery. Implementation of the NFP has helped to mitigate

A Qualitative Assessment of Current CCF Guidance Based on a Review of Safety System Digital Implementation Changes with Evolving Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Korsah, Kofi; Muhlheim, Michael David; Wood, Richard

The US Nuclear Regulatory Commission (NRC) is initiating a new rulemaking project to develop a digital system common-cause failure (CCF) rule. This rulemaking will review and modify or affirm the NRC's current digital system CCF policy as discussed in the Staff Requirements Memorandum to the Secretary of the Commission, Office of the NRC (SECY) 93-087, Policy, Technical, and Licensing Issues Pertaining to Evolutionary and Advanced Light Water Reactor (ALWR) Designs, and Branch Technical Position (BTP) 7-19, Guidance on Evaluation of Defense-in-Depth and Diversity in Digital Computer-Based Instrumentation and Control Systems, as well as Chapter 7, Instrumentation and Controls, in NRCmore » Regulatory Guide (NUREG)-0800, Standard Review Plan for Review of Safety Analysis Reports for Nuclear Power Plants (ML033580677). The Oak Ridge National Laboratory (ORNL) is providing technical support to the NRC staff on the CCF rulemaking, and this report is one of several providing the technical basis to inform NRC staff members. For the task described in this report, ORNL examined instrumentation and controls (I&C) technology implementations in nuclear power plants in the light of current CCF guidance. The intent was to assess whether the current position on CCF is adequate given the evolutions in digital safety system implementations and, if gaps in the guidance were found, to provide recommendations as to how these gaps could be closed.« less

33 CFR 164.72 - Navigational-safety equipment, charts or maps, and publications required on towing vessels.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Navigational-safety equipment, charts or maps, and publications required on towing vessels. 164.72 Section 164.72 Navigation and... NAVIGATION SAFETY REGULATIONS § 164.72 Navigational-safety equipment, charts or maps, and publications...

Education Department Begins Process to Implement HEA Reauthorization with New Campus Safety Provisions

ERIC Educational Resources Information Center

Phillips, Lisa

2008-01-01

The U.S. Department of Education has announced the beginning of the process to develop rules for new requirements in the recently passed Higher Education Act (HEA). Highlights of the HEA that affect campus public safety departments include measures that: (1) Require a fire log be maintained at an institution of higher education for events that…

Mind the Gap. A systematic review to identify usability and safety challenges and practices during electronic health record implementation.

PubMed

Ratwani, Raj; Fairbanks, Terry; Savage, Erica; Adams, Katie; Wittie, Michael; Boone, Edna; Hayden, Andrew; Barnes, Janey; Hettinger, Zach; Gettinger, Andrew

2016-11-16

Decisions made during electronic health record (EHR) implementations profoundly affect usability and safety. This study aims to identify gaps between the current literature and key stakeholders' perceptions of usability and safety practices and the challenges encountered during the implementation of EHRs. Two approaches were used: a literature review and interviews with key stakeholders. We performed a systematic review of the literature to identify usability and safety challenges and best practices during implementation. A total of 55 articles were reviewed through searches of PubMed, Web of Science and Scopus. We used a qualitative approach to identify key stakeholders' perceptions; semi-structured interviews were conducted with a diverse set of health IT stakeholders to understand their current practices and challenges related to usability during implementation. We used a grounded theory approach: data were coded, sorted, and emerging themes were identified. Conclusions from both sources of data were compared to identify areas of misalignment. We identified six emerging themes from the literature and stakeholder interviews: cost and resources, risk assessment, governance and consensus building, customization, clinical workflow and usability testing, and training. Across these themes, there were misalignments between the literature and stakeholder perspectives, indicating major gaps. Major gaps identified from each of six emerging themes are discussed as critical areas for future research, opportunities for new stakeholder initiatives, and opportunities to better disseminate resources to improve the implementation of EHRs. Our analysis identified practices and challenges across six different emerging themes, illustrated important gaps, and results suggest critical areas for future research and dissemination to improve EHR implementation.

State-Level Implementation of Health and Safety Policies to Prevent Sudden Death and Catastrophic Injuries Within Secondary School Athletics

PubMed Central

Adams, William M.; Scarneo, Samantha E.; Casa, Douglas J.

2017-01-01

Background: Sudden death and catastrophic injuries during sport can be attenuated with the implementation of evidence-based health and safety policies. However, the extent of the implementation of these policies within secondary school athletics is unknown. Purpose: To provide an assessment of the implementation of health and safety policies pertaining to the leading causes of sudden death and catastrophic injuries in sport within secondary school athletics in the United States. Study Design: Descriptive epidemiology study. Methods: A rubric for evidence-based practices for preventing the leading causes of death and catastrophic injuries in sport was created. The rubric comprised 5 equally weighted sections for sudden cardiac arrest, head injuries, exertional heat stroke, appropriate medical coverage, and emergency preparedness. State high school athletic association (SHSAA) policies, enacted legislation, and Department of Education policies were extensively reviewed for all 50 states and the District of Columbia. States meeting the specific criteria in the rubric, which required policies to be mandated for all SHSAA member schools, were awarded credit; the weighted scores were tabulated to calculate an aggregate score. States were then ranked from 1 (best) to 51 (worst) based on the aggregate score achieved. Results: The median score on the rubric was 47.1% (range, 23.00%-78.75%). States ranked 1 through 10 (from 78.75% to 56.98%) were North Carolina, Kentucky, Massachusetts, New Jersey, South Dakota, Missouri, Washington, Hawaii, Wisconsin, and Georgia, respectively. States ranked 11 through 20 (from 56.03% to 50.55%) were Arkansas, New York, Mississippi, West Virginia, Oregon, Illinois, Tennessee, Arizona, Texas, and District of Columbia, respectively. States ranked 21 through 30 (from 49.40% to 44.00%) were Virginia, Pennsylvania, Florida, New Mexico, Alabama, Maine, Rhode Island, Indiana, Nevada, and Utah, respectively. States ranked 31 through 40 (from 43

State-Level Implementation of Health and Safety Policies to Prevent Sudden Death and Catastrophic Injuries Within Secondary School Athletics.

PubMed

Adams, William M; Scarneo, Samantha E; Casa, Douglas J

2017-09-01

Sudden death and catastrophic injuries during sport can be attenuated with the implementation of evidence-based health and safety policies. However, the extent of the implementation of these policies within secondary school athletics is unknown. To provide an assessment of the implementation of health and safety policies pertaining to the leading causes of sudden death and catastrophic injuries in sport within secondary school athletics in the United States. Descriptive epidemiology study. A rubric for evidence-based practices for preventing the leading causes of death and catastrophic injuries in sport was created. The rubric comprised 5 equally weighted sections for sudden cardiac arrest, head injuries, exertional heat stroke, appropriate medical coverage, and emergency preparedness. State high school athletic association (SHSAA) policies, enacted legislation, and Department of Education policies were extensively reviewed for all 50 states and the District of Columbia. States meeting the specific criteria in the rubric, which required policies to be mandated for all SHSAA member schools, were awarded credit; the weighted scores were tabulated to calculate an aggregate score. States were then ranked from 1 (best) to 51 (worst) based on the aggregate score achieved. The median score on the rubric was 47.1% (range, 23.00%-78.75%). States ranked 1 through 10 (from 78.75% to 56.98%) were North Carolina, Kentucky, Massachusetts, New Jersey, South Dakota, Missouri, Washington, Hawaii, Wisconsin, and Georgia, respectively. States ranked 11 through 20 (from 56.03% to 50.55%) were Arkansas, New York, Mississippi, West Virginia, Oregon, Illinois, Tennessee, Arizona, Texas, and District of Columbia, respectively. States ranked 21 through 30 (from 49.40% to 44.00%) were Virginia, Pennsylvania, Florida, New Mexico, Alabama, Maine, Rhode Island, Indiana, Nevada, and Utah, respectively. States ranked 31 through 40 (from 43.93% to 39.80%) were Ohio, Delaware, Alaska, Vermont

49 CFR 176.704 - Requirements relating to transport indices and criticality safety indices.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 2 2011-10-01 2011-10-01 false Requirements relating to transport indices and... Requirements relating to transport indices and criticality safety indices. (a) The sum of the transport indices..., transport and unloading are to be supervised by persons qualified in the transport of radioactive material...

49 CFR 176.704 - Requirements relating to transport indices and criticality safety indices.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Requirements relating to transport indices and... Requirements relating to transport indices and criticality safety indices. (a) The sum of the transport indices..., transport and unloading are to be supervised by persons qualified in the transport of radioactive material...

Formal Foundations for Hierarchical Safety Cases

NASA Technical Reports Server (NTRS)

Denney, Ewen; Pai, Ganesh; Whiteside, Iain

2015-01-01

Safety cases are increasingly being required in many safety-critical domains to assure, using structured argumentation and evidence, that a system is acceptably safe. However, comprehensive system-wide safety arguments present appreciable challenges to develop, understand, evaluate, and manage, partly due to the volume of information that they aggregate, such as the results of hazard analysis, requirements analysis, testing, formal verification, and other engineering activities. Previously, we have proposed hierarchical safety cases, hicases, to aid the comprehension of safety case argument structures. In this paper, we build on a formal notion of safety case to formalise the use of hierarchy as a structuring technique, and show that hicases satisfy several desirable properties. Our aim is to provide a formal, theoretical foundation for safety cases. In particular, we believe that tools for high assurance systems should be granted similar assurance to the systems to which they are applied. To this end, we formally specify and prove the correctness of key operations for constructing and managing hicases, which gives the specification for implementing hicases in AdvoCATE, our toolset for safety case automation. We motivate and explain the theory with the help of a simple running example, extracted from a real safety case and developed using AdvoCATE.

32 CFR 861.4 - DOD air transportation quality and safety requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... experience, and the individual's potential to perform safely. Freedom from alcohol abuse and illegal drugs is.... Freedom from alcohol abuse and illegal drugs is required. (ii) Quality assurance. A system that... certificate are expected. Safety equipment is available in hangars, shops, etc., and is serviceable. Shipping...

32 CFR 861.4 - DOD air transportation quality and safety requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... experience, and the individual's potential to perform safely. Freedom from alcohol abuse and illegal drugs is.... Freedom from alcohol abuse and illegal drugs is required. (ii) Quality assurance. A system that... certificate are expected. Safety equipment is available in hangars, shops, etc., and is serviceable. Shipping...

32 CFR 861.4 - DOD air transportation quality and safety requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... experience, and the individual's potential to perform safely. Freedom from alcohol abuse and illegal drugs is.... Freedom from alcohol abuse and illegal drugs is required. (ii) Quality assurance. A system that... certificate are expected. Safety equipment is available in hangars, shops, etc., and is serviceable. Shipping...

32 CFR 861.4 - DOD air transportation quality and safety requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... experience, and the individual's potential to perform safely. Freedom from alcohol abuse and illegal drugs is.... Freedom from alcohol abuse and illegal drugs is required. (ii) Quality assurance. A system that... certificate are expected. Safety equipment is available in hangars, shops, etc., and is serviceable. Shipping...

Governing patient safety: lessons learned from a mixed methods evaluation of implementing a ward-level medication safety scorecard in two English NHS hospitals

PubMed Central

Ramsay, Angus I G; Turner, Simon; Cavell, Gillian; Oborne, C Alice; Thomas, Rebecca E; Cookson, Graham; Fulop, Naomi J

2014-01-01

Background Relatively little is known about how scorecards presenting performance indicators influence medication safety. We evaluated the effects of implementing a ward-level medication safety scorecard piloted in two English NHS hospitals and factors influencing these. Methods We used a mixed methods, controlled before and after design. At baseline, wards were audited on medication safety indicators; during the ‘feedback’ phase scorecard results were presented to intervention wards on a weekly basis over 7 weeks. We interviewed 49 staff, including clinicians and managers, about scorecard implementation. Results At baseline, 18.7% of patients (total n=630) had incomplete allergy documentation; 53.4% of patients (n=574) experienced a drug omission in the preceding 24 h; 22.5% of omitted doses were classified as ‘critical’; 22.1% of patients (n=482) either had ID wristbands not reflecting their allergy status or no ID wristband; and 45.3% of patients (n=237) had drugs that were either unlabelled or labelled for another patient in their drug lockers. The quantitative analysis found no significant improvement in intervention wards following scorecard feedback. Interviews suggested staff were interested in scorecard feedback and described process and culture changes. Factors influencing scorecard implementation included ‘normalisation’ of errors, study duration, ward leadership, capacity to engage and learning preferences. Discussion Presenting evidence-based performance indicators may potentially influence staff behaviour. Several practical and cultural factors may limit feedback effectiveness and should be considered when developing improvement interventions. Quality scorecards should be designed with care, attending to evidence of indicators’ effectiveness and how indicators and overall scorecard composition fit the intended audience. PMID:24029440

75 FR 5244 - Pipeline Safety: Integrity Management Program for Gas Distribution Pipelines; Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-02

... Management Program for Gas Distribution Pipelines; Correction AGENCY: Pipeline and Hazardous Materials Safety... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part... Regulations to require operators of gas distribution pipelines to develop and implement integrity management...

Usage of information safety requirements in improving tube bending process

NASA Astrophysics Data System (ADS)

Livshitz, I. I.; Kunakov, E.; Lontsikh, P. A.

2018-05-01

This article is devoted to an improvement of the technological process's analysis with the information security requirements implementation. The aim of this research is the competition increase analysis in aircraft industry enterprises due to the information technology implementation by the example of the tube bending technological process. The article analyzes tube bending kinds and current technique. In addition, a potential risks analysis in a tube bending technological process is carried out in terms of information security.

78 FR 16825 - Approval of Air Quality Implementation Plans; Navajo Nation; Regional Haze Requirements for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-19

... Quality Implementation Plans; Navajo Nation; Regional Haze Requirements for Navajo Generating Station... source-specific federal implementation plan (FIP) requiring the Navajo Generating Station (NGS), located... . SUPPLEMENTARY INFORMATION: Throughout this document, ``we'', ``us'', and ``our'' refer to EPA. Table of Contents...

Implementation and evaluation of a prototype consumer reporting system for patient safety events.

PubMed

Weingart, Saul N; Weissman, Joel S; Zimmer, Karen P; Giannini, Robert C; Quigley, Denise D; Hunter, Lauren E; Ridgely, M Susan; Schneider, Eric C

2017-08-01

No methodologically robust system exists for capturing consumer-generated patient safety reports. To address this challenge, we developed and pilot-tested a prototype consumer reporting system for patient safety, the Health Care Safety Hotline. Mixed methods evaluation. The Hotline was implemented in two US healthcare systems from 1 February 2014 through 30 June 2015. Patients, family members and caregivers associated with two US healthcare systems. A consumer-oriented incident reporting system for telephone or web-based administration was developed to elicit medical mistakes and care-related injuries. Key informant interviews, measurement of website traffic and analysis of completed reports. Key informants indicated that Hotline participation was motivated by senior leaders' support and alignment with existing quality and safety initiatives. During the measurement period from 1 October 2014 through 30 June 2015, the home page had 1530 visitors with a unique IP address. During its 17 months of operation, the Hotline received 37 completed reports including 20 mistakes without harm and 15 mistakes with injury. The largest category of mistake concerned problems with diagnosis or advice from a health practitioner. Hotline reports prompted quality reviews, an education intervention, and patient follow-ups. While generating fewer reports than its capacity to manage, the Health Care Safety Hotline demonstrated the feasibility of consumer-oriented patient safety reporting. Further research is needed to understand how to increase consumers' use of these systems. © The Author 2017. Published by Oxford University Press in association with the International Society for Quality in Health Care. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

Implementing a Commercial Rule Base as a Medication Order Safety Net

PubMed Central

Reichley, Richard M.; Seaton, Terry L.; Resetar, Ervina; Micek, Scott T.; Scott, Karen L.; Fraser, Victoria J.; Dunagan, W. Claiborne; Bailey, Thomas C.

2005-01-01

A commercial rule base (Cerner Multum) was used to identify medication orders exceeding recommended dosage limits at five hospitals within BJC HealthCare, an integrated health care system. During initial testing, clinical pharmacists determined that there was an excessive number of nuisance and clinically insignificant alerts, with an overall alert rate of 9.2%. A method for customizing the commercial rule base was implemented to increase rule specificity for problematic rules. The system was subsequently deployed at two facilities and achieved alert rates of less than 1%. Pharmacists screened these alerts and contacted ordering physicians in 21% of cases. Physicians made therapeutic changes in response to 38% of alerts presented to them. By applying simple techniques to customize rules, commercial rule bases can be used to rapidly deploy a safety net to screen drug orders for excessive dosages, while preserving the rule architecture for later implementations of more finely tuned clinical decision support. PMID:15802481

State Safety Oversight Program : annual report for 2003

DOT National Transportation Integrated Search

2004-10-01

The Federal Transit Administration (FTA) State Safety Oversight Rule (49 CFR Part 659) requires oversight of all rail transit agencies in revenue operation after January 1, 1997. This report summarizes activities performed to implement the State Safe...

State safety oversight program : annual report for 1999

DOT National Transportation Integrated Search

2000-09-01

The Federal Transit Administration (FTA) State Safety Oversight Rule (49 CFR Part 659) requires oversight for all rail transit agencies in revenue operation after January 1, 1997. This report summarizes activities performed to implement the State Saf...

[Patient safety in education and training of healthcare professionals in Germany].

PubMed

Hoffmann, Barbara; Siebert, H; Euteneier, A

2015-01-01

In order to improve patient safety, healthcare professionals who care for patients directly or indirectly are required to possess specific knowledge and skills. Patient safety education is not or only poorly represented in education and examination regulations of healthcare professionals in Germany; therefore, it is only practiced rarely and on a voluntary basis. Meanwhile, several training curricula and concepts have been developed in the past 10 years internationally and recently in Germany, too. Based on these concepts the German Coalition for Patient Safety developed a catalogue of core competencies required for safety in patient care. This catalogue will serve as an important orientation when patient safety is to be implemented as a subject of professional education in Germany in the future. Moreover, teaching staff has to be trained and educational and training activities have to be evaluated. Patient safety education and training for (undergraduate) healthcare professional will require capital investment.

Research requirements to improve safety of civil helicopters

NASA Technical Reports Server (NTRS)

Waters, K. T.

1977-01-01

Helicopter and fixed-wing accident data were reviewed and major accident causal factors were established. The impact of accidents on insurance rates was examined and the differences in fixed-wing and helicopter accident costs discussed. The state of the art in civil helicopter safety was compared to military helicopters. Goals were established based on incorporation of known technology and achievable improvements that require development, as well as administrative-type changes such as the impact of improved operational planning, training, and human factors effects. Specific R and D recommendations are provided with an estimation of the payoffs, timing, and development costs.

Using Contemporary Leadership Skills in Medication Safety Programs.

PubMed

Hertig, John B; Hultgren, Kyle E; Weber, Robert J

2016-04-01

The discipline of studying medication errors and implementing medication safety programs in hospitals dates to the 1970s. These initial programs to prevent errors focused only on pharmacy operation changes - and not the broad medication use system. In the late 1990s, research showed that faulty systems, and not faulty people, are responsible for errors and require a multidisciplinary approach. The 2013 ASHP Statement on the Role of the Medication Safety Leader recommended that medication safety leaders be integrated team members rather than a single point of contact. Successful medication safety programs must employ a new approach - one that embraces the skills of all health care team members and positions many leaders to improve safety. This approach requires a new set of leadership skills based on contemporary management principles, including followership, team-building, tracking and assessing progress, storytelling and communication, and cultivating innovation, all of which promote transformational change. The application of these skills in developing or changing a medication safety program is reviewed in this article.

78 FR 22785 - Approval and Promulgation of Air Quality Implementation Plans; Delaware, State Board Requirements

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-17

... Promulgation of Air Quality Implementation Plans; Delaware, State Board Requirements AGENCY: Environmental... revision to the Delaware State Implementation Plan (SIP) submitted by the Delaware Department of Natural Resources and Environmental Control (DNREC) on January 11, 2013. The SIP revision addresses requirements of...

42 CFR 3.106 - Security requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

...) Security management. A PSO must address: (i) Maintenance and effective implementation of written policies... 42 Public Health 1 2010-10-01 2010-10-01 false Security requirements. 3.106 Section 3.106 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL PROVISIONS PATIENT SAFETY...

42 CFR 3.106 - Security requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

...) Security management. A PSO must address: (i) Maintenance and effective implementation of written policies... 42 Public Health 1 2011-10-01 2011-10-01 false Security requirements. 3.106 Section 3.106 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL PROVISIONS PATIENT SAFETY...

Implementing the 2009 Institute of Medicine recommendations on resident physician work hours, supervision, and safety.

PubMed

Blum, Alexander B; Shea, Sandra; Czeisler, Charles A; Landrigan, Christopher P; Leape, Lucian

2011-01-01

Institute of Medicine report has been largely confined to the medical education community, led by the Accreditation Council for Graduate Medical Education (ACGME). To begin gathering these perspectives and developing a plan to implement safer work hours for resident physicians, a conference entitled "Enhancing sleep, supervision and safety: What will it take to implement the Institute of Medicine recommendations?" was held at Harvard Medical School on June 17-18, 2010. This White Paper is a product of a diverse group of 26 representative stakeholders bringing relevant new information and innovative practices to bear on a critical patient safety problem. Given that our conference included experts from across disciplines with diverse perspectives and interests, not every recommendation was endorsed by each invited conference participant. However, every recommendation made here was endorsed by the majority of the group, and many were endorsed unanimously. Conference members participated in the process, reviewed the final product, and provided input before publication. Participants provided their individual perspectives, which do not necessarily represent the formal views of any organization. In September 2010 the ACGME issued new rules to go into effect on July 1, 2011. Unfortunately, they stop considerably short of the Institute of Medicine's recommendations and those endorsed by this conference. In particular, the ACGME only applied the limitation of 16 hours to first-year resident physicans. Thus, it is clear that policymakers, hospital administrators, and residency program directors who wish to implement safer health care systems must go far beyond what the ACGME will require. We hope this White Paper will serve as a guide and provide encouragement for that effort. RESIDENT PHYSICIAN WORKLOAD AND SUPERVISION: By the end of training, a resident physician should be able to practice independently. Yet much of resident physicians' time is dominated by tasks with little

Electrical safety of conducted electrical weapons relative to requirements of relevant electrical standards.

PubMed

Panescu, Dorin; Nerheim, Max; Kroll, Mark

2013-01-01

TASER(®) conducted electrical weapons (CEW) deliver electrical pulses that can inhibit a person's neuromuscular control or temporarily incapacitate. TASER X26, X26P, and X2 are among CEW models most frequently deployed by law enforcement agencies. The X2 CEW uses two cartridge bays while the X26 and X26P CEWs have only one. The TASER X26P CEW electronic output circuit design is equivalent to that of any one of the two TASER X2 outputs. The goal of this paper was to analyze the nominal electrical outputs of TASER X26, X26P, and X2 CEWs in reference to provisions of several international standards that specify safety requirements for electrical medical devices and electrical fences. Although these standards do not specifically mention CEWs, they are the closest electrical safety standards and hence give very relevant guidance. The outputs of two TASER X26 and two TASER X2 CEWs were measured and confirmed against manufacturer and other published specifications. The TASER X26, X26P, and X2 CEWs electrical output parameters were reviewed against relevant safety requirements of UL 69, IEC 60335-2-76 Ed 2.1, IEC 60479-1, IEC 60479-2, AS/NZS 60479.1, AS/NZS 60479.2 and IEC 60601-1. Prior reports on similar topics were reviewed as well. Our measurements and analyses confirmed that the nominal electrical outputs of TASER X26, X26P and X2 CEWs lie within safety bounds specified by relevant requirements of the above standards.

49 CFR 238.603 - Safety planning requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... acceptable level using a formal safety methodology such as MIL-STD-882; and (4) Impose operational... using a formal safety methodology such as MIL-STD-882; (5) Monitor the progress in resolving safety...

49 CFR 238.603 - Safety planning requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... acceptable level using a formal safety methodology such as MIL-STD-882; and (4) Impose operational... using a formal safety methodology such as MIL-STD-882; (5) Monitor the progress in resolving safety...

Implementation of ionizing radiation environment requirements for Space Station

NASA Technical Reports Server (NTRS)

Boeder, Paul A.; Watts, John W.

1993-01-01

Proper functioning of Space Station hardware requires that the effects of high-energy ionizing particles from the natural environment and (possibly) from man-made sources be considered during design. At the Space Station orbit of 28.5-deg inclination and 330-440 km altitude, geomagnetically trapped protons and electrons contribute almost all of the dose, while galactic cosmic rays and anomalous cosmic rays may produce Single Event Upsets (SEUs), latchups, and burnouts of microelectronic devices. Implementing ionizing radiation environment requirements for Space Station has been a two part process, including the development of a description of the environment for imposing requirements on the design and the development of a control process for assessing how well the design addresses the effects of the ionizing radiation environment. We will review both the design requirements and the control process for addressing ionizing radiation effects on Space Station.

Nuclear safety

NASA Technical Reports Server (NTRS)

Buden, D.

1991-01-01

Topics dealing with nuclear safety are addressed which include the following: general safety requirements; safety design requirements; terrestrial safety; SP-100 Flight System key safety requirements; potential mission accidents and hazards; key safety features; ground operations; launch operations; flight operations; disposal; safety concerns; licensing; the nuclear engine for rocket vehicle application (NERVA) design philosophy; the NERVA flight safety program; and the NERVA safety plan.

Implementing a Just Culture: Perceptions of Nurse Managers of Required Knowledge, Skills and Attitudes.

PubMed

Freeman, Michelle; Morrow, Linda A; Cameron, Margo; McCullough, Karen

2016-01-01

Healthcare organizations have been challenged to create a just culture as part of their culture of safety. To explore perceptions of nurse managers in developing personal competencies in order to enable them to effectively implement a just culture in their units. Qualitative content analysis of semi-structured interviews with nine nurse managers identified themes. Data were independently analyzed by three members of the research team. Analysis of interview transcripts identified the following four themes: need for education of managers and employees, need for a variety of new skills for nurse managers, need to change attitudes from the long-standing punitive culture and fault of individual and challenges in implementation because of time constraints. Implementing a just culture is complex. Education of nurse managers is crucial. A series of educational strategies is recommended. Findings support the need for new competencies to enable nurse managers to effectively implement a just culture in their units.

Software Safety Risk in Legacy Safety-Critical Computer Systems

NASA Technical Reports Server (NTRS)

Hill, Janice L.; Baggs, Rhoda

2007-01-01

Safety Standards contain technical and process-oriented safety requirements. Technical requirements are those such as "must work" and "must not work" functions in the system. Process-Oriented requirements are software engineering and safety management process requirements. Address the system perspective and some cover just software in the system > NASA-STD-8719.13B Software Safety Standard is the current standard of interest. NASA programs/projects will have their own set of safety requirements derived from the standard. Safety Cases: a) Documented demonstration that a system complies with the specified safety requirements. b) Evidence is gathered on the integrity of the system and put forward as an argued case. [Gardener (ed.)] c) Problems occur when trying to meet safety standards, and thus make retrospective safety cases, in legacy safety-critical computer systems.

78 FR 40443 - Submission for OMB Review; Comment Request-Recordkeeping Requirements Under the Safety Standard...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-05

... Request--Recordkeeping Requirements Under the Safety Standard for Infant Walkers AGENCY: Consumer Product... for infant walkers, 16 CFR part 1216. No comments were received in response to that notice. Therefore... has been incorporated by reference in the safety standard for infant walkers, 16 CFR part 1216...

Rocket propulsion hazard summary: Safety classification, handling experience and application to space shuttle payload

NASA Technical Reports Server (NTRS)

Pennington, D. F.; Man, T.; Persons, B.

1977-01-01

The DOT classification for transportation, the military classification for quantity distance, and hazard compatibility grouping used to regulate the transportation and storage of explosives are presented along with a discussion of tests used in determining sensitivity of propellants to an impact/shock environment in the absence of a large explosive donor. The safety procedures and requirements of a Scout launch vehicle, Western and Eastern Test Range, and the Minuteman, Delta, and Poseidon programs are reviewed and summarized. Requirements of the space transportation system safety program include safety reviews from the subsystem level to the completed payload. The Scout safety procedures will satisfy a portion of these requirements but additional procedures need to be implemented to comply with the safety requirements for Shuttle operation from the Eastern Test Range.

Patient safety in phlebology: The ACP Phlebology Safety Checklist.

PubMed

Collares, Felipe Birchal; Sonde, Mehru; Harper, Kenneth; Armitage, Michael; Neuhardt, Diana L; Fronek, Helane S

2018-05-01

Objectives To assess the current use of safety checklists among the American College of Phlebology (ACP) members and their interest in implementing a checklist supported by the ACP on their clinical practices; and to develop a phlebology safety checklist. Method Online surveys were sent to ACP members, and a phlebology safety checklist was developed by a multispecialty team through the ACP Leadership Academy. Results Forty-seven percent of respondents are using a safety checklist in their practices; 23% think that a phlebology safety checklist would interfere or disrupt workflow; 79% answered that a phlebology safety checklist could improve procedure outcomes or prevent complications; and 85% would be interested in implementing a phlebology safety checklist approved by the ACP. Conclusion A phlebology safety checklist was developed with the intent to increase awareness on patient safety and improve outcome in phlebology practice.

Criticality Safety Evaluation of Standard Criticality Safety Requirements #1-520 g Operations in PF-4

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yamanaka, Alan Joseph Jr.

Guidance has been requested from the Nuclear Criticality Safety Division (NCSD) regarding processes that involve 520 grams of fissionable material or less. This Level-3 evaluation was conducted and documented in accordance with NCS-AP-004 (Ref. 1), formerly NCS-GUIDE-01. This evaluation is being written as a generic evaluation for all operations that will be able to operate using a 520-gram mass limit. Implementation for specific operations will be performed using a Level 1 CSED, which will confirm and document that this CSED can be used for the specific operation as discussed in NCS-MEMO-17-007 (Ref. 2). This Level 3 CSED updates and supersedesmore » the analysis performed in NCS-TECH-14-014 (Ref. 3).« less

46 CFR 53.05-1 - Safety valve requirements for steam boilers (modifies HG-400 and HG-401).

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 2 2011-10-01 2011-10-01 false Safety valve requirements for steam boilers (modifies HG-400 and HG-401). 53.05-1 Section 53.05-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING HEATING BOILERS Pressure Relieving Devices (Article 4) § 53.05-1 Safety valve requirements for steam boilers (modifies HG...

46 CFR 53.05-1 - Safety valve requirements for steam boilers (modifies HG-400 and HG-401).

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 2 2013-10-01 2013-10-01 false Safety valve requirements for steam boilers (modifies HG-400 and HG-401). 53.05-1 Section 53.05-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING HEATING BOILERS Pressure Relieving Devices (Article 4) § 53.05-1 Safety valve requirements for steam boilers (modifies HG...

46 CFR 53.05-1 - Safety valve requirements for steam boilers (modifies HG-400 and HG-401).

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 2 2014-10-01 2014-10-01 false Safety valve requirements for steam boilers (modifies HG-400 and HG-401). 53.05-1 Section 53.05-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING HEATING BOILERS Pressure Relieving Devices (Article 4) § 53.05-1 Safety valve requirements for steam boilers (modifies HG...

46 CFR 53.05-1 - Safety valve requirements for steam boilers (modifies HG-400 and HG-401).

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 2 2012-10-01 2012-10-01 false Safety valve requirements for steam boilers (modifies HG-400 and HG-401). 53.05-1 Section 53.05-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING HEATING BOILERS Pressure Relieving Devices (Article 4) § 53.05-1 Safety valve requirements for steam boilers (modifies HG...

30 CFR 250.405 - What are the safety requirements for diesel engines used on a drilling rig?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 2 2011-07-01 2011-07-01 false What are the safety requirements for diesel... are the safety requirements for diesel engines used on a drilling rig? You must equip each diesel engine with an air take device to shut down the diesel engine in the event of a runaway. (a) For a diesel...

Authorization basis requirements comparison report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brantley, W.M.

The TWRS Authorization Basis (AB) consists of a set of documents identified by TWRS management with the concurrence of DOE-RL. Upon implementation of the TWRS Basis for Interim Operation (BIO) and Technical Safety Requirements (TSRs), the AB list will be revised to include the BIO and TSRs. Some documents that currently form part of the AB will be removed from the list. This SD identifies each - requirement from those documents, and recommends a disposition for each to ensure that necessary requirements are retained when the AB is revised to incorporate the BIO and TSRs. This SD also identifies documentsmore » that will remain part of the AB after the BIO and TSRs are implemented. This document does not change the AB, but provides guidance for the preparation of change documentation.« less

The implementation and assessment of a quality and safety culture education program in a large radiation oncology department.

PubMed

Woodhouse, Kristina D; Volz, Edna; Bellerive, Marc; Bergendahl, Howard W; Gabriel, Peter E; Maity, Amit; Hahn, Stephen M; Vapiwala, Neha

2016-01-01

In 2010, the American Society for Radiation Oncology launched a national campaign to improve patient safety in radiation therapy. One recommendation included the expansion of educational programs dedicated to quality and safety. We subsequently implemented a quality and safety culture education program (Q-SCEP) in our large radiation oncology department. The purpose of this study is to describe the design, implementation, and impact of this Q-SCEP. In 2010, we instituted a comprehensive Q-SCEP, consisting of a longitudinal series of lectures, meetings, and interactive workshops. Participation was mandatory for all department members across all network locations. Electronic surveys were administered to assess employee engagement, knowledge retention, preferred learning styles, and the program's overall impact. The Agency for Healthcare Research and Quality (AHRQ) Survey on Patient Safety Culture was administered. Analysis of variance was used for statistical analysis. Between 2010 and 2015, 100% of targeted staff participated in Q-SCEP. Thirty-three percent (132 of 400) and 30% (136 of 450) responded to surveys in 2012 and 2014, respectively. Mean scores improved from 73% to 89% (P < .001), with the largest improvement seen among therapists (+21.7%). The majority strongly agreed that safety culture education was critical to performing their jobs well. Full course compliance was achieved despite the sizable number of personnel and treatment centers. Periodic assessments demonstrated high knowledge retention, which significantly improved over time in nearly all department divisions. Additionally, our AHRQ patient safety grade remains high and continues to improve. These results will be used to further enhance ongoing internal safety initiatives and to inform future innovative efforts. Copyright © 2016 American Society for Radiation Oncology. Published by Elsevier Inc. All rights reserved.

40 CFR 52.381 - Requirements for state implementation plan revisions relating to new motor vehicles.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 3 2011-07-01 2011-07-01 false Requirements for state implementation plan revisions relating to new motor vehicles. 52.381 Section 52.381 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Connecticut § 52.381 Requirements fo...

40 CFR 52.433 - Requirements for state implementation plan revisions relating to new motor vehicles.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 3 2011-07-01 2011-07-01 false Requirements for state implementation plan revisions relating to new motor vehicles. 52.433 Section 52.433 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Delaware § 52.433 Requirements for...

An aspect-oriented approach for designing safety-critical systems

NASA Astrophysics Data System (ADS)

Petrov, Z.; Zaykov, P. G.; Cardoso, J. P.; Coutinho, J. G. F.; Diniz, P. C.; Luk, W.

The development of avionics systems is typically a tedious and cumbersome process. In addition to the required functions, developers must consider various and often conflicting non-functional requirements such as safety, performance, and energy efficiency. Certainly, an integrated approach with a seamless design flow that is capable of requirements modelling and supporting refinement down to an actual implementation in a traceable way, may lead to a significant acceleration of development cycles. This paper presents an aspect-oriented approach supported by a tool chain that deals with functional and non-functional requirements in an integrated manner. It also discusses how the approach can be applied to development of safety-critical systems and provides experimental results.

How could the topic patient safety be embedded in the curriculum? A recommendation by the Committee for Patient Safety and Error Management of the GMA.

PubMed

Kiesewetter, Jan; Drossard, Sabine; Gaupp, Rainer; Baschnegger, Heiko; Kiesewetter, Isabel; Hoffmann, Susanne

2018-01-01

The topic of patient safety is of fundamental interest for the health care sector. In view of the realisation of the National Competence-Based Learning Objectives Catalogue for Undergraduate Medical Education (NKLM) this topic now has to be prepared for medical education. For a disciplinary and content-related orientation the GMA Committee developed the Learning Objectives Catalogue Patient Safety for Undergraduate Medical Education (GMA-LZK). To ensure an optimal implementation of the GMA-LZK we recommend a longitudinal embedding into the existing curriculum. This position paper supports the implementation of the GMA-LZK and is aimed at everyone who wants to establish teaching courses on the topic patient safety and embed them in the curriculum. In light of this, we will initially describe the key features for a structured analysis of the current situation. Based on three best-practice-examples, as seen in the faculties of Freiburg, Bonn and Munich, different approaches to the implementation of the GMA-LZK will be illustrated. Lastly, we will outline the methodical requirements regarding the curriculum development as well as the disciplinary and methodical competences that the lecturers will have to hold or develop to fulfil the requirements.

78 FR 2662 - Proposed Extension of Approval of Information Collection; Comment Request: Safety Standard for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-14

... Information Collection; Comment Request: Safety Standard for Cigarette Lighters AGENCY: Consumer Product... disposable and novelty cigarette lighters. This collection of information consists of testing and recordkeeping requirements in certification regulations implementing the Safety Standard for Cigarette Lighters...

76 FR 62309 - Implementing a Nationwide, Broadband, Interoperable Public Safety Network in the 700 MHz Band

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-07

... FEDERAL COMMUNICATIONS COMMISSION 47 CFR Chapter I [PS Docket No. 06-229; WT Docket 06-150; WP Docket 07-100; FCC 11-113] Implementing a Nationwide, Broadband, Interoperable Public Safety Network in the 700 MHz Band AGENCY: Federal Communications Commission. ACTION: Final rule. SUMMARY: In this...

[Implementation of safety devices: biological accident prevention].

PubMed

Catalán Gómez, M Teresa; Sol Vidiella, Josep; Castellà Castellà, Manel; Castells Bo, Carolina; Losada Pla, Nuria; Espuny, Javier Lluís

2010-04-01

Accidental exposures to blood and biological material were the most frequent and potentially serious accidents in healthcare workers, reported in the Prevention of Occupational Risks Unit within 2002. Evaluate the biological percutaneous accidents decrease after a progressive introduction of safety devices. Biological accidents produced between 2.002 and 2.006 were analyzed and reported by the injured healthcare workers to the Level 2b Hospital Prevention of Occupational Risk Unit with 238 beds and 750 employees. The key of the study was the safety devices (peripheral i.v. catheter, needleless i.v. access device and capillary blood collection lancet). Within 2002, 54 percutaneous biological accidents were registered and 19 in 2006, that represents a 64.8% decreased. There has been no safety devices accident reported involving these material. Accidents registered during the implantation period occurred because safety devices were not used at that time. Safety devices have proven to be effective in reducing needle stick percutaneous accidents, so that they are a good choice in the primary prevention of biological accidents contact.

Spent Nuclear Fuel (SNF) project Integrated Safety Management System phase I and II Verification Review Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

CARTER, R.P.

1999-11-19

The U.S. Department of Energy (DOE) commits to accomplishing its mission safely. To ensure this objective is met, DOE issued DOE P 450.4, Safety Management System Policy, and incorporated safety management into the DOE Acquisition Regulations ([DEAR] 48 CFR 970.5204-2 and 90.5204-78). Integrated Safety Management (ISM) requires contractors to integrate safety into management and work practices at all levels so that missions are achieved while protecting the public, the worker, and the environment. The contractor is required to describe the Integrated Safety Management System (ISMS) to be used to implement the safety performance objective.

Design, implementation and evaluation of an independent real-time safety layer for medical robotic systems using a force-torque-acceleration (FTA) sensor.

PubMed

Richter, Lars; Bruder, Ralf

2013-05-01

Most medical robotic systems require direct interaction or contact with the robot. Force-Torque (FT) sensors can easily be mounted to the robot to control the contact pressure. However, evaluation is often done in software, which leads to latencies. To overcome that, we developed an independent safety system, named FTA sensor, which is based on an FT sensor and an accelerometer. An embedded system (ES) runs a real-time monitoring system for continuously checking of the readings. In case of a collision or error, it instantaneously stops the robot via the robot's external emergency stop. We found that the ES implementing the FTA sensor has a maximum latency of [Formula: see text] ms to trigger the robot's emergency stop. For the standard settings in the application of robotized transcranial magnetic stimulation, the robot will stop after at most 4 mm. Therefore, it works as an independent safety layer preventing patient and/or operator from serious harm.

Safety interventions on the labor and delivery unit.

PubMed

Kacmar, Rachel M

2017-06-01

The present review highlights recent advances in efforts to improve patient safety on labor and delivery units and well tolerated care for pregnant patients in general. Recent studies in obstetric patient safety have a broad focus but repetitive themes for interdisciplinary training include: simulating critical events, having open multidisciplinary communication, frequent reviews of cases of maternal morbidity, and implementing maternal early warning systems. The National Partnership for Maternal Safety is also active in promoting care bundles across many topics on maternal safety. A culture of safety is the goal for all obstetric units. Achieving that ideal requires multidisciplinary collaboration, frequent reassessment for areas of improvement, and a culture of openness to change when improvement opportunities arise.

23 CFR 230.109 - Implementation of specific Equal Employment Opportunity requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Implementation of specific Equal Employment Opportunity requirements. 230.109 Section 230.109 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... amended at 51 FR 22800, June 23, 1986] ...

23 CFR 230.109 - Implementation of specific Equal Employment Opportunity requirements.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false Implementation of specific Equal Employment Opportunity requirements. 230.109 Section 230.109 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... amended at 51 FR 22800, June 23, 1986] ...

23 CFR 230.109 - Implementation of specific Equal Employment Opportunity requirements.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 23 Highways 1 2014-04-01 2014-04-01 false Implementation of specific Equal Employment Opportunity requirements. 230.109 Section 230.109 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... amended at 51 FR 22800, June 23, 1986] ...

23 CFR 230.109 - Implementation of specific Equal Employment Opportunity requirements.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 23 Highways 1 2013-04-01 2013-04-01 false Implementation of specific Equal Employment Opportunity requirements. 230.109 Section 230.109 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... amended at 51 FR 22800, June 23, 1986] ...

75 FR 82277 - Health Insurance Issuers Implementing Medical Loss Ratio (MLR) Requirements Under the Patient...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-30

...-AA06 Health Insurance Issuers Implementing Medical Loss Ratio (MLR) Requirements Under the Patient... Register (FR Doc 2010-29596 (75 FR 74864)) entitled ``Health Insurance Issuers Implementing Medical Loss... request for comments entitled ``Health Insurance Issuers Implementing Medical Loss Ratio (MLR...

Implementing local agency safety management

DOT National Transportation Integrated Search

2003-12-17

For local agencies to mount a successful effort toward reducing motor vehicle collisions and their costs, an effective systematic approach must be taken. A Safety Management System (SMS) has two basic components: a collaborative information exchange ...

[Implementing evidence and implementation research: two different and prime realities].

PubMed

Rumbo Prieto, José María; Martínez Ques, Ángel Alfredo; Sobrido Prieto, María; Raña Lama, Camilo Daniel; Vázquez Campo, Miriam; Braña Marcos, Beatriz

Scientific research can contribute to more efficient health care, enhance care quality and safety of persons. In order for this to happen, the knowledge gained must be put into practice. Implementation is known as the introduction of a change or innovation to daily practice, which requires effective communication and the elimination of barriers that hinder this process. Best practice implementation experiences are being used increasingly in the field of nursing. The difficulty in identifying the factors that indicate the success or failure of implementation has led to increased studies to build a body of differentiated knowledge, recognized as implementation science or implementation research. Implementation research is the scientific study whose objective is the adoption and systematic incorporation of research findings into clinical practice to improve the quality and efficiency of health services. The purpose of implementation research is to improve the health of the population through equitable and effective implementation of rigorously evaluated scientific knowledge, which involves gathering the evidence that has a positive impact on the health of the community. In this text, we set out the characteristics of nursing implementation research, providing a synthesis of different methods, theories, key frameworks and implementation strategies, along with the terminology proposed for greater conceptual clarity. Copyright © 2016 Elsevier España, S.L.U. All rights reserved.

Using Contemporary Leadership Skills in Medication Safety Programs

PubMed Central

Hertig, John B.; Hultgren, Kyle E.; Weber, Robert J.

2016-01-01

The discipline of studying medication errors and implementing medication safety programs in hospitals dates to the 1970s. These initial programs to prevent errors focused only on pharmacy operation changes – and not the broad medication use system. In the late 1990s, research showed that faulty systems, and not faulty people, are responsible for errors and require a multidisciplinary approach. The 2013 ASHP Statement on the Role of the Medication Safety Leader recommended that medication safety leaders be integrated team members rather than a single point of contact. Successful medication safety programs must employ a new approach – one that embraces the skills of all health care team members and positions many leaders to improve safety. This approach requires a new set of leadership skills based on contemporary management principles, including followership, team-building, tracking and assessing progress, storytelling and communication, and cultivating innovation, all of which promote transformational change. The application of these skills in developing or changing a medication safety program is reviewed in this article. PMID:27303083

30 CFR 250.459 - What are the safety requirements for drilling fluid-handling areas?

Code of Federal Regulations, 2011 CFR

2011-07-01

..., REGULATION, AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Drilling Operations Drilling Fluid Requirements § 250.459 What are... 30 Mineral Resources 2 2011-07-01 2011-07-01 false What are the safety requirements for drilling...

The Ergonomic Program Implementation Continuum (EPIC): integration of health and safety--a process evaluation in the healthcare sector.

PubMed

Baumann, Andrea; Holness, D Linn; Norman, Patrica; Idriss-Wheeler, Dina; Boucher, Patricia

2012-07-01

This article presents a health and safety intervention model and the use of process evaluation to assess a participatory ergonomic intervention. The effectiveness of the Ergonomic Program Implementation Continuum (EPIC) was assessed at six healthcare pilot sites in Ontario, Canada. The model provided a framework to demonstrate evaluation findings. Participants reported that EPIC was thorough and identified improvements related to its use. Participants believed the program contributed to advancing an organizational culture of safety (COS). Main barriers to program uptake included resistance to change and need for adequate funding and resources. The dedication of organizational leaders and consultant coaches was identified as essential to the program's success. In terms of impact on industry, findings contribute to the evidence-based knowledge of health and safety interventions and support use of the framework for creating a robust infrastructure to advance organizational COS and link staff safety and wellness with patient safety in healthcare. Copyright © 2012 National Safety Council and Elsevier Ltd. All rights reserved.

Increasing Patient Safety by Closing the Sterile Production Gap-Part 2. Implementation.

PubMed

Agalloco, James P

2017-01-01

Terminal sterilization is considered the preferred means for the production of sterile drug products because it affords enhanced safety for the patient as the formulation is filled into its final container, sealed, and sterilized. Despite the obvious patient benefits, the use of terminal sterilization is artificially constrained by unreasonable expectations for the minimum time-temperature process to be used. The core misunderstanding with terminal sterilization is a fixation that destruction of a high concentration of a resistant biological indicator is required. The origin of this misconception is unclear, but it has resulted in sterilization conditions that are extremely harsh (15 min at 121 °C, of F 0 >8 min), which limit the use of terminal sterilization to extremely heat-stable formulations. These articles outline the artificial nature of the process constraints and describe a scientifically sound means to expand the use of terminal sterilization by identifying the correct process goal-the destruction of the bioburden present in the container prior to sterilization. Recognition that the true intention is bioburden destruction in routine products allows for the use of reduced conditions (lower temperatures, shorter process dwell, or both) without added patient risk. By focusing attention on the correct process target, lower time-temperature conditions can be used to expand the use of terminal sterilization to products unable to withstand the harsh conditions that have been mistakenly applied. The first article provides the background, and describes the benefits to patient, producer, and regulator. The second article includes validation and operational advice that can be used in the implementation. LAY ABSTRACT: Terminal sterilization is considered the preferred means for the production of sterile drug products because it affords enhanced safety for the patient as the formulation is filled into its final container, sealed, and sterilized. Despite the obvious

Implementation of School Districts' Food Safety Plans and Perceptions of Support for Food Safety and Training in Child Nutrition Programs in One USDA Region

ERIC Educational Resources Information Center

Dawso Van Druff, Cynthia A.

2012-01-01

School foodservice directors (FSDs) and school business officials (SBOs) in public school districts with enrollments between 2,500 and 25,000 in the USDA Mid-Atlantic geographic region provided responses to a paper-and-pencil survey. The FSDs assessed the level of implementation of a mandated school food safety plan in their districts and…

Structural Safety of a Hubble Space Telescope Science Instrument

NASA Technical Reports Server (NTRS)

Lou, M. C.; Brent, D. N.

1993-01-01

This paper gives an overview of safety requirements related to structural design and verificationof payloads to be launched and/or retrieved by the Space Shuttle. To demonstrate the generalapproach used to implement these requirements in the development of a typical Shuttle payload, theWide Field/Planetary Camera II, a second generation science instrument currently being developed bythe Jet Propulsion Laboratory (JPL) for the Hubble Space Telescope is used as an example. Inaddition to verification of strength and dynamic characteristics, special emphasis is placed upon thefracture control implementation process, including parts classification and fracture controlacceptability.

78 FR 47015 - Software Requirement Specifications for Digital Computer Software Used in Safety Systems of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-02

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0195] Software Requirement Specifications for Digital Computer Software Used in Safety Systems of Nuclear Power Plants AGENCY: Nuclear Regulatory Commission... issuing a revised regulatory guide (RG), revision 1 of RG 1.172, ``Software Requirement Specifications for...

Effect of Surgical Safety checklist implementation on the occurrence of postoperative complications in orthopedic patients.

PubMed

Boaz, Mona; Bermant, Alexander; Ezri, Tiberiu; Lakstein, Dror; Berlovitz, Yitzhak; Laniado, Iris; Feldbrin, Zeev

2014-01-01

Surgical adverse events are errors that emerge during perioperative patient care. The World Health Organization recently published "Guidelines for Safe Surgery." To estimate the effect of implementation of a safety checklist in an orthopedic surgical department. We conducted a single-center cross-sectional study to compare the incidence of complications prior to and following implementation of the Guidelines for Safe Surgery checklist. The medical records of all consecutive adult patients admitted to the orthopedics department at Wolfson Medical Center during the period 1 July 2008 to 1 January 2009 (control group) and from 1 January 2009 to 1 July 2009 (study group) were reviewed. The occurrences of all complications were compared between the two groups. The records of 760 patients (380 in each group) hospitalized during this 12 month period were analyzed. Postoperative fever occurred in 5.3% versus 10.6% of patients with and without the checklist respectively (P = 0.008). Significantly more patients received only postoperative prophylactic antibiotics rather than both pre-and postoperative antibiotic treatment prior to implementation of the checklist (3.2% versus 0%, P = 0.004). In addition, a statistically non-significant 34% decrease in the rate of surgical wound infection was also detected in the checklist group. In a logistic regression model of postoperative fever, the checklist emerged as a significant independent predictor of this outcome: odds ratio 0.53, 95% confidence interval 0.29-0.96, P = 0.037. A significant reduction in postoperative fever after the implementation of the surgical safety checklist occurred. It is possible that the improved usage of preoperative prophylactic antibiotics may explain the reduction in postoperative fever.

Teaching Health and Safety through Science

ERIC Educational Resources Information Center

School Science Review, 2013

2013-01-01

Experimental and investigative work has been an integral element in the teaching of science in schools for many years. Although students have always been taught to work safely, there is now a more general requirement that they will be taught about health and safety and how it should be implemented. That is, they must understand something of the…

General requirements to implement the personal dose equivalent Hp(10) in Brazil

NASA Astrophysics Data System (ADS)

Gomes Lopes, Amanda; Da Silva, Francisco Cesar Augusto

2018-03-01

To update the dosimetry quantity with the international community, Brazil is changing the Individual Dose (Hx) to the Personal Dose Equivalent Hp(10). A bibliographical survey on the technical and administrative requirements of nine countries that use Hp(10) was carried out to obtain the most relevant ones. All of them follow IEC and ISO guidelines for technical requirements, but administrative requirements change from country to country. Based on countries experiences, this paper presents a list of important general requirements to implement Hp(10) and to prepare the Brazilian requirements according to the international scientific community.

76 FR 76874 - Implementation of Regulations Required Under Title XI of the Food, Conservation and Energy Act of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-09

..., including those that could improve food safety. Although there were many comments received in favor of this... agreement if the grower failed to comply with the processor's internal food safety or animal welfare... reputations if required to allow a grower to operate following a breach involving food safety or animal...

[Storage of plant protection products in farms: minimum safety requirements].

PubMed

Dutto, Moreno; Alfonzo, Santo; Rubbiani, Maristella

2012-01-01

Failure to comply with requirements for proper storage and use of pesticides in farms can be extremely hazardous and the risk of accidents involving farm workers, other persons and even animals is high. There are still wide differences in the interpretation of the concept of "securing or making safe", by workers in this sector. One of the critical points detected, particularly in the fruit sector, is the establishment of an adequate storage site for plant protection products. The definition of "safe storage of pesticides" is still unclear despite the recent enactment of Legislative Decree 81/2008 regulating health and work safety in Italy. In addition, there are no national guidelines setting clear minimum criteria for storage of plant protection products in farms. The authors, on the basis of their professional experience and through analysis of recent legislation, establish certain minimum safety standards for storage of pesticides in farms.

42 CFR 495.338 - Health information technology implementation advance planning document requirements (HIT IAPD).

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 5 2011-10-01 2011-10-01 false Health information technology implementation... CERTIFICATION STANDARDS FOR THE ELECTRONIC HEALTH RECORD TECHNOLOGY INCENTIVE PROGRAM Requirements Specific to the Medicaid Program § 495.338 Health information technology implementation advance planning document...

42 CFR 495.338 - Health information technology implementation advance planning document requirements (HIT IAPD).

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 5 2012-10-01 2012-10-01 false Health information technology implementation... CERTIFICATION STANDARDS FOR THE ELECTRONIC HEALTH RECORD TECHNOLOGY INCENTIVE PROGRAM Requirements Specific to the Medicaid Program § 495.338 Health information technology implementation advance planning document...

42 CFR 495.338 - Health information technology implementation advance planning document requirements (HIT IAPD).

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 5 2014-10-01 2014-10-01 false Health information technology implementation... CERTIFICATION STANDARDS FOR THE ELECTRONIC HEALTH RECORD TECHNOLOGY INCENTIVE PROGRAM Requirements Specific to the Medicaid Program § 495.338 Health information technology implementation advance planning document...

42 CFR 495.338 - Health information technology implementation advance planning document requirements (HIT IAPD).

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 5 2013-10-01 2013-10-01 false Health information technology implementation... CERTIFICATION STANDARDS FOR THE ELECTRONIC HEALTH RECORD TECHNOLOGY INCENTIVE PROGRAM Requirements Specific to the Medicaid Program § 495.338 Health information technology implementation advance planning document...

42 CFR 495.338 - Health information technology implementation advance planning document requirements (HIT IAPD).

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 5 2010-10-01 2010-10-01 false Health information technology implementation... CERTIFICATION STANDARDS FOR THE ELECTRONIC HEALTH RECORD TECHNOLOGY INCENTIVE PROGRAM Requirements Specific to the Medicaid Program § 495.338 Health information technology implementation advance planning document...

78 FR 58186 - Approval and Promulgation of State Implementation Plan Revisions; Infrastructure Requirements for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-23

... Approval and Promulgation of State Implementation Plan Revisions; Infrastructure Requirements for the 1997...) submissions from the State of Colorado to demonstrate that the SIP meets the infrastructure requirements of... NAAQS is promulgated, review their SIPs to ensure that they meet infrastructure requirements. The State...

77 FR 37362 - Implementation of the Middle Class Tax Relief and Job Creation Act of 2012; Establishment of a...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-21

...] Implementation of the Middle Class Tax Relief and Job Creation Act of 2012; Establishment of a Public Safety... public safety answering points (PSAPs) as required by the ``Middle Class Tax Relief and Job Creation Act... Objectives of, the Proposed Rules 21. The ``Middle Class Tax Relief and Job Creation Act of 2012'' requires...