Quality, risk management and patient safety: the challenge of effective integration.

PubMed

França, Margarida

2008-01-01

Nowadays we observe the development of three waves of intervention and change within healthcare services: quality management, risk management and patient safety. The Patient Safety movement has been launched at international level as a consequence of the Institute of Medicine's report--To Err is Human, and today patient safety constitutes one basic dimension of health quality subjected to the direct intervention of supranational entities (WHO, EU) and Member States' Governments. The objective of this paper is to raise awareness about the value of quality improvement (QI) methodologies and tools to sustainable healthcare quality outcomes.

Effects of organizational safety on employees' proactivity safety behaviors and occupational health and safety management systems in Chinese high-risk small-scale enterprises.

PubMed

Mei, Qiang; Wang, Qiwei; Liu, Suxia; Zhou, Qiaomei; Zhang, Jingjing

2018-06-07

Based on the characteristics of small-scale enterprises, the improvement of occupational health and safety management systems (OHS MS) needs an effective intervention. This study proposed a structural equation model and examined the relationships of perceived organization support for safety (POSS), person-organization safety fit (POSF) and proactivity safety behaviors with safety management, safety procedures and safety hazards identification. Data were collected from 503 employees of 105 Chinese high-risk small-scale enterprises over 6 months. The results showed that both POSS and POSF were positively related to improvement in safety management, safety procedures and safety hazards identification through proactivity safety behaviors. Our findings provide a new perspective on organizational safety for improving OHS MS for small-scale enterprises and extend the application of proactivity safety behaviors.

Clinical risk management and patient safety education for nurses: a critique.

PubMed

Johnstone, Megan-Jane; Kanitsaki, Olga

2007-04-01

Nurses have a pivotal role to play in clinical risk management (CRM) and promoting patient safety in health care domains. Accordingly, nurses need to be prepared educationally to manage clinical risk effectively when delivering patient care. Just what form the CRM and safety education of nurses should take, however, remains an open question. A recent search of the literature has revealed a surprising lack of evidence substantiating models of effective CRM and safety education for nurses. In this paper, a critical discussion is advanced on the question of CRM and safety education for nurses and the need for nurse education in this area to be reviewed and systematically researched as a strategic priority, nationally and internationally. It is a key contention of this paper that without 'good' safety education research it will not be possible to ensure that the educational programs that are being offered to nurses in this area are evidence-based and designed in a manner that will enable nurses to develop the capabilities they need to respond effectively to the multifaceted and complex demands that are inherent in their ethical and professional responsibilities to promote and protect patient safety and quality care in health care domains.

Road Infrastructure Safety Management in Poland

NASA Astrophysics Data System (ADS)

Budzynski, Marcin; Jamroz, Kazimierz; Kustra, Wojciech; Michalski, Lech; Gaca, Stanislaw

2017-10-01

The objective of road safety infrastructure management is to ensure that when roads are planned, designed, built and used road risks can be identified, assessed and mitigated. Road transport safety is significantly less developed than that of rail, water and air transport. The average individual risk of being a fatality in relation to the distance covered is thirty times higher in road transport that in the other modes. This is mainly because the different modes have a different approach to safety management and to the use of risk management methods and tools. In recent years Poland has had one of the European Union’s highest road death numbers. In 2016 there were 3026 fatalities on Polish roads with 40,766 injuries. Protecting road users from the risk of injury and death should be given top priority. While Poland’s national and regional road safety programmes address this problem and are instrumental in systematically reducing the number of casualties, the effects are far from the expectations. Modern approaches to safety focus on three integrated elements: infrastructure measures, safety management and safety culture. Due to its complexity, the process of road safety management requires modern tools to help with identifying road user risks, assess and evaluate the safety of road infrastructure and select effective measures to improve road safety. One possible tool for tackling this problem is the risk-based method for road infrastructure safety management. European Union Directive 2008/96/EC regulates and proposes a list of tools for managing road infrastructure safety. Road safety tools look at two criteria: the life cycle of a road structure and the process of risk management. Risk can be minimized through the application of the proposed interventions during design process as reasonable. The proposed methods of risk management bring together two stages: risk assessment and risk response occurring within the analyzed road structure (road network, road

Risk Management: Earning Recognition with an Automated Safety Program

ERIC Educational Resources Information Center

Lansberry, Linden; Strasburger, Tom

2012-01-01

Risk management is a huge task that requires diligent oversight to avoid penalties, fines, or lawsuits. Add in the burden of limited resources that schools face today, and the challenge of meeting the required training, reporting, compliance, and other administrative issues associated with a safety program is almost insurmountable. Despite an…

Human health and safety risks management in underground coal mines using fuzzy TOPSIS.

PubMed

Mahdevari, Satar; Shahriar, Kourosh; Esfahanipour, Akbar

2014-08-01

The scrutiny of health and safety of personnel working in underground coal mines is heightened because of fatalities and disasters that occur every year worldwide. A methodology based on fuzzy TOPSIS was proposed to assess the risks associated with human health in order to manage control measures and support decision-making, which could provide the right balance between different concerns, such as safety and costs. For this purpose, information collected from three hazardous coal mines namely Hashouni, Hojedk and Babnizu located at the Kerman coal deposit, Iran, were used to manage the risks affecting the health and safety of their miners. Altogether 86 hazards were identified and classified under eight categories: geomechanical, geochemical, electrical, mechanical, chemical, environmental, personal, and social, cultural and managerial risks. Overcoming the uncertainty of qualitative data, the ranking process is accomplished by fuzzy TOPSIS. After running the model, twelve groups with different risks were obtained. Located in the first group, the most important risks with the highest negative effects are: materials falling, catastrophic failure, instability of coalface and immediate roof, firedamp explosion, gas emission, misfire, stopping of ventilation system, wagon separation at inclines, asphyxiation, inadequate training and poor site management system. According to the results, the proposed methodology can be a reliable technique for management of the minatory hazards and coping with uncertainties affecting the health and safety of miners when performance ratings are imprecise. The proposed model can be primarily designed to identify potential hazards and help in taking appropriate measures to minimize or remove the risks before accidents can occur. Copyright © 2014 Elsevier B.V. All rights reserved.

Risk perception, risk management and safety assessment: what can governments do to increase public confidence in their vaccine system?

PubMed

MacDonald, Noni E; Smith, Jennifer; Appleton, Mary

2012-09-01

For decades vaccine program managers and governments have devoted many resources to addressing public vaccine concerns, vaccine risk perception, risk management and safety assessment. Despite ever growing evidence that vaccines are safe and effective, public concerns continue. Education and evidence based scientific messages have not ended concerns. How can governments and programs more effectively address the public's vaccine concerns and increase confidence in the vaccine safety system? Vaccination hesitation has been attributed to concerns about vaccine safety, perceptions of high vaccine risks and low disease risk and consequences. Even when the public believes vaccines are important for protection many still have concerns about vaccine safety. This overview explores how heuristics affect public perception of vaccines and vaccine safety, how the public finds and uses vaccine information, and then proposes strategies for changes in the approach to vaccine safety communications. Facts and evidence confirming the safety of vaccines are not enough. Vaccine beliefs and behaviours must be shaped. This will require a shift in the what, when, how and why of vaccine risk and benefit communication content and practice. A change to a behavioural change strategy such as the WHO COMBI program that has been applied to disease eradication efforts is suggested. Copyright © 2011. Published by Elsevier Ltd.. All rights reserved.

Gun Safety Management with Patients at Risk for Suicide

ERIC Educational Resources Information Center

Simon, Robert I.

2007-01-01

Guns in the home are associated with a five-fold increase in suicide. All patients at risk for suicide must be asked if guns are available at home or easily accessible elsewhere, or if they have intent to buy or purchase a gun. Gun safety management requires a collaborative team approach including the clinician, patient, and designated person…

Safety in psychiatric inpatient care: The impact of risk management culture on mental health nursing practice.

PubMed

Slemon, Allie; Jenkins, Emily; Bungay, Vicky

2017-10-01

The discourse of safety has informed the care of individuals with mental illness through institutionalization and into modern psychiatric nursing practices. Confinement arose from safety: out of both societal stigma and fear for public safety, as well as benevolently paternalistic aims to protect individuals from self-harm. In this paper, we argue that within current psychiatric inpatient environments, safety is maintained as the predominant value, and risk management is the cornerstone of nursing care. Practices that accord with this value are legitimized and perpetuated through the safety discourse, despite evidence refuting their efficacy, and patient perspectives demonstrating harm. To illustrate this growing concern in mental health nursing care, we provide four exemplars of risk management strategies utilized in psychiatric inpatient settings: close observations, seclusion, door locking and defensive nursing practice. The use of these strategies demonstrates the necessity to shift perspectives on safety and risk in nursing care. We suggest that to re-centre meaningful support and treatment of clients, nurses should provide individualized, flexible care that incorporates safety measures while also fundamentally re-evaluating the risk management culture that gives rise to and legitimizes harmful practices. © 2017 The Authors Nursing Inquiry published by John Wiley & Sons Ltd.

Risk Management Plans: are they a tool for improving drug safety?

PubMed

Frau, Serena; Font Pous, Maria; Luppino, Maria Rosa; Conforti, Anita

2010-08-01

In 2005, new European legislation authorised Regulatory Agencies to require drug companies to submit a risk management plan (RMP) comprising detailed commitments for post-marketing pharmacovigilance. The aim of the study is to describe the characteristics of RMP for 15 drugs approved by the European Medicines Agency (EMA) and their impact on post-marketing safety issues. Of the 90 new Chemical Entities approved through a centralised procedure by the EMA during 2006 and 2007, 15 of them were selected and their safety aspects and relative RMPs analysed. All post-marketing communications released for safety reasons related to these drugs were also considered. A total of 157 safety specifications were established for the drugs assessed. Risk minimisation activities were foreseen for 5 drugs as training activities. Post-marketing safety issues emerged for 12 of them, leading to 39 type II variations in Summary of Product Characteristics (SPC). Nearly half of such variations, 19 (49%), concerned safety aspects not envisaged by the RMPs. Besides this, 9 Safety Communications were published for 6 out of 15 drugs assessed. The present study reveals several critical points on the way RMPs have been implemented. Several activities proposed by the RMPs do not appear to be adequate in dealing with the potential risks of drugs. Poor communication of risk to practitioners and to the public, and above all limited transparency for the total assessment of risk, seem to transform RMPs into a tool to reassure the public when inadequately evaluated drugs are granted premature marketing authorisation.

[Endorsement of risk management and patient safety by certification of conformity in health care quality assessment].

PubMed

Waßmuth, Ralf

2015-01-01

Certification of conformity in health care should provide assurance of compliance with quality standards. This also includes risk management and patient safety. Based on a comprehensive definition of quality, beneficial effects on the management of risks and the enhancement of patient safety can be expected from certification of conformity. While these effects have strong face validity, they are currently not sufficiently supported by evidence from health care research. Whether this relates to a lack of evidence or a lack of investigation remains open. Advancing safety culture and "climate", as well as learning from adverse events rely in part on quality management and are at least in part reflected in the certification of healthcare quality. However, again, evidence of the effectiveness of such measures is limited. Moreover, additional factors related to personality, attitude and proactive action of healthcare professionals are crucial factors in advancing risk management and patient safety which are currently not adequately reflected in certification of conformity programs.

Safe patient care - safety culture and risk management in otorhinolaryngology.

PubMed

St Pierre, Michael

2013-12-13

Safety culture is positioned at the heart of an organization's vulnerability to error because of its role in framing organizational awareness to risk and in providing and sustaining effective strategies of risk management. Safety related attitudes of leadership and management play a crucial role in the development of a mature safety culture ("top-down process"). A type marker for organizational culture and thus a predictor for an organization's maturity in respect to safety is information flow and in particular an organization's general way of coping with information that suggests anomaly. As all values and beliefs, relationships, learning, and other aspects of organizational safety culture are about sharing and processing information, safety culture has been termed "informed culture". An informed culture is free of blame and open for information provided by incidents. "Incident reporting systems" are the backbone of a reporting culture, where good information flow is likely to support and encourage other kinds of cooperative behavior, such as problem solving, innovation, and inter-departmental bridging. Another facet of an informed culture is the free flow of information during perioperative patient care. The World Health Organization's safe surgery checklist" is the most prevalent example of a standardized information exchange aimed at preventing patient harm due to information deficit. In routine tasks mandatory standard operating procedures have gained widespread acceptance in guaranteeing the highest possible process quality. Technical and non-technical skills of healthcare professionals are the decisive human resource for an efficient and safe delivery of patient care and the avoidance of errors. The systematic enhancement of staff qualification by providing training opportunities can be a major investment in patient safety. In recent years several otorhinolaryngology departments have started to incorporate stimulation based team trainings into their

[Safe patient care: safety culture and risk management in otorhinolaryngology].

PubMed

St Pierre, M

2013-04-01

Safety culture is positioned at the heart of an organisation's vulnerability to error because of its role in framing organizational awareness to risk and in providing and sustaining effective strategies of risk management. Safety related attitudes of leadership and management play a crucial role in the development of a mature safety culture ("top-down process"). A type marker for organizational culture and thus a predictor for an organizations maturity in respect to safety is information flow and in particular an organization's general way of coping with information that suggests anomaly. As all values and beliefs, relationships, learning, and other aspects of organizational safety culture are about sharing and processing information, safety culture has been termed "informed culture". An informed culture is free of blame and open for information provided by incidents. "Incident reporting systems" are the backbone of a reporting culture, where good information flow is likely to support and encourage other kinds of cooperative behavior, such as problem solving, innovation, and inter-departmental bridging. Another facet of an informed culture is the free flow of information during perioperative patient care. The World Health Organisation's "safe surgery checklist" is the most prevalent example of a standardized information exchange aimed at preventing patient harm due to information deficit. In routine tasks mandatory standard operating procedures have gained widespread acceptance in guaranteeing the highest possible process quality.Technical and non-technical skills of healthcare professionals are the decisive human resource for an efficient and safe delivery of patient care and the avoidance of errors. The systematic enhancement of staff qualification by providing training opportunities can be a major investment in patient safety. In recent years several otorhinolaryngology departments have started to incorporate simulation based team trainings into their curriculum

There is more to risk and safety planning than dramatic risks: Mental health nurses' risk assessment and safety-management practice.

PubMed

Higgins, Agnes; Doyle, Louise; Downes, Carmel; Morrissey, Jean; Costello, Paul; Brennan, Michael; Nash, Michael

2016-04-01

Risk assessment and safety planning are considered a cornerstone of mental health practice, yet limited research exists into how mental health nurses conceptualize 'risk' and how they engage with risk assessment and safety planning. The aim of the present study was to explore mental health nurses' practices and confidence in risk assessment and safety planning. A self-completed survey was administered to 381 mental health nurses in Ireland. The findings indicate that nurses focus on risk to self and risk to others, with the risk of suicide, self-harm, substance abuse, and violence being most frequently assessed. Risk from others and 'iatrogenic' risk were less frequently considered. Overall, there was limited evidence of recovery-oriented practice in relation to risk. The results demonstrate a lack of meaningful engagement with respect to collaborative safety planning, the identification and inclusion of protective factors, and the inclusion of positive risk-taking opportunities. In addition, respondents report a lack of confidence working with positive risk taking and involving family/carers in the risk-assessment and safety-planning process. Gaps in knowledge about risk-assessment and safety-planning practice, which could be addressed through education, are identified, as are the implications of the findings for practice and research. © 2015 Australian College of Mental Health Nurses Inc.

75 FR 10490 - Joint Meeting of the Arthritis Drugs Advisory Committee and the Drug Safety and Risk Management...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-08

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2010-N-0001] Joint Meeting of the Arthritis Drugs Advisory Committee and the Drug Safety and Risk Management Advisory... Drug Safety and Risk Management Advisory Committee. General Function of the Committees: To provide...

Roy's safety-first portfolio principle in financial risk management of disastrous events.

PubMed

Chiu, Mei Choi; Wong, Hoi Ying; Li, Duan

2012-11-01

Roy pioneers the concept and practice of risk management of disastrous events via his safety-first principle for portfolio selection. More specifically, his safety-first principle advocates an optimal portfolio strategy generated from minimizing the disaster probability, while subject to the budget constraint and the mean constraint that the expected final wealth is not less than a preselected disaster level. This article studies the dynamic safety-first principle in continuous time and its application in asset and liability management. We reveal that the distortion resulting from dropping the mean constraint, as a common practice to approximate the original Roy's setting, either leads to a trivial case or changes the problem nature completely to a target-reaching problem, which produces a highly leveraged trading strategy. Recognizing the ill-posed nature of the corresponding Lagrangian method when retaining the mean constraint, we invoke a wisdom observed from a limited funding-level regulation of pension funds and modify the original safety-first formulation accordingly by imposing an upper bound on the funding level. This model revision enables us to solve completely the safety-first asset-liability problem by a martingale approach and to derive an optimal policy that follows faithfully the spirit of the safety-first principle and demonstrates a prominent nature of fighting for the best and preventing disaster from happening. © 2012 Society for Risk Analysis.

Managing Risk in Safety Critical Operations - Lessons Learned from Space Operations

NASA Technical Reports Server (NTRS)

Gonzalez, Steven A.

2002-01-01

The Mission Control Center (MCC) at Johnson Space Center (JSC) has a rich legacy of supporting Human Space Flight operations throughout the Apollo, Shuttle and International Space Station eras. Through the evolution of ground operations and the Mission Control Center facility, NASA has gained a wealth of experience of what it takes to manage the risk in Safety Critical Operations, especially when human life is at risk. The focus of the presentation will be on the processes (training, operational rigor, team dynamics) that enable the JSC/MCC team to be so successful. The presentation will also share the evolution of the Mission Control Center architecture and how the evolution was introduced while managing the risk to the programs supported by the team. The details of the MCC architecture (e.g., the specific software, hardware or tools used in the facility) will not be shared at the conference since it would not give any additional insight as to how risk is managed in Space Operations.

Evaluating SafeClub: can risk management training improve the safety activities of community soccer clubs?

PubMed

Abbott, K; Klarenaar, P; Donaldson, A; Sherker, S

2008-06-01

To evaluate a sports safety-focused risk-management training programme. Controlled before and after test. Four community soccer associations in Sydney, Australia. 76 clubs (32 intervention, 44 control) at baseline, and 67 clubs (27 intervention, 40 control) at post-season and 12-month follow-ups. SafeClub, a sports safety-focused risk-management training programme (3x2 hour sessions) based on adult-learning principles and injury-prevention concepts and models. Changes in mean policy, infrastructure and overall safety scores as measured using a modified version of the Sports Safety Audit Tool. There was no significant difference in the mean policy, infrastructure and overall safety scores of intervention and control clubs at baseline. Intervention clubs achieved higher post-season mean policy (11.9 intervention vs 7.5 controls), infrastructure (15.2 vs 10.3) and overall safety (27.0 vs 17.8) scores than did controls. These differences were greater at the 12-month follow-up: policy (16.4 vs 7.6); infrastructure (24.7 vs 10.7); and overall safety (41.1 vs 18.3). General linear modelling indicated that intervention clubs achieved statistically significantly higher policy (p<0.001), infrastructure (p<0.001) and overall safety (p<0.001) scores compared with control clubs at the post-season and 12-month follow-ups. There was also a significant linear interaction of time and group for all three scores: policy (p<0.001), infrastructure (p<0.001) and overall safety (p<0.001). SafeClub effectively assisted community soccer clubs to improve their sports safety activities, particularly the foundations and processes for good risk-management practice, in a sustainable way.

Safety skills of mental health workers: empirical evidence of a risk management strategy.

PubMed

Flannery, Raymond B; Walker, Andrew P

2003-01-01

To reduce violence in the workplace, health care facilities invest time and resources in risk management strategies such as photo identification and controlled access and surveillance. Studies of assaultive psychiatric patients continue to document that mental health workers (MHWs) are the most frequent targets of the patient violence. Unexamined in these findings is the role skilled MHWs contribute in restoring safety and order in the aftermath of these assaults. This six-year, empirical retrospective study examined the safety skills of MHWs in containing violence. Although they were 28% of the workforce, MHWs restored order in the majority of single assault incidents and restraint procedures. Their skills appear to be a risk management strategy in their own right. The implications are discussed.

Hanford Site Environmental Safety and Health Fiscal Year 2001 Budget-Risk management summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

REEP, I.E.

1999-05-12

The Hanford Site Environment, Safety and Health (ES&H) Budget-Risk Management Summary report is prepared to support the annual request to sites in the U.S. Department of Energy (DOE) Complex by DOE, Headquarters. The request requires sites to provide supplementary crosscutting information related to ES&H activities and the ES&H resources that support these activities. The report includes the following: (1) A summary status of fiscal year (FY) 1999 ES&H performance and ES&H execution commitments; (2)Status and plans of Hanford Site Office of Environmental Management (EM) cleanup activities; (3) Safety and health (S&H) risk management issues and compliance vulnerabilities of FY 2001more » Target Case and Below Target Case funding of EM cleanup activities; (4) S&H resource planning and crosscutting information for FY 1999 to 2001; and (5) Description of indirect-funded S&H activities.« less

[Sleepiness, safety on the road and management of risk].

PubMed

Garbarino, S; Traversa, F; Spigno, F

2012-01-01

Public health studies have shown that sleepiness at the wheel and other risks associated with sleep are responsible for 5% to 30% of road accidents, depending on the type of driver and/or road. In industrialized countries one-fifth of all traffic accidents can be ascribed to sleepiness behind the wheel. Sleep disorders and various common acute and chronic medical conditions together with lifestyles, extended work hours and prolonged wakefulness directly or indirectly affect the quality and quantity of one's sleep increasing the number of workers with sleep debt and staggered hours. These conditions may increase the risk of road accidents. Strategies to reduce this risk of both commercial and non-commercial drivers related to sleepiness include reliable diagnosis and treatment of sleep disorders, management of chronobiological conflicts, adequate catch-up sleep, and countermeasures against sleepiness at the wheel. Road transport safety requires the adoption of occupational health measures, including risk assessment, health education, technical-environmental prevention and health surveillance.

Risk management systems for health care and safety development on transplantation: a review and a proposal.

PubMed

Pretagostini, R; Gabbrielli, F; Fiaschetti, P; Oliveti, A; Cenci, S; Peritore, D; Stabile, D

2010-05-01

Starting from the report on medical errors published in 1999 by the US Institute of Medicine, a number of different approaches to risk management have been developed for maximum risk reduction in health care activities. The health care authorities in many countries have focused attention on patient safety, employing action research programs that are based on quite different principles. We performed a systematic Medline research of the literature since 1999. The following key words were used, also combining boolean operators and medical subheading terms: "adverse event," "risk management," "error," and "governance." Studies published in the last 5 years were particularly classified in various groups: risk management in health care systems; safety in specific hospital activities; and health care institutions' official documents. Methods of action researches have been analysed and their characteristics compared. Their suitability for safety development in donation, retrieval, and transplantation processes were discussed in the reality of the Italian transplant network. Some action researches and studies were dedicated to entire national healthcare systems, whereas others focused on specific risks. Many research programs have undergone critical review in the literature. Retrospective analysis has centered on so-called sentinel events to particularly analyze only a minor portion of the organizational phenomena, which can be the origin of an adverse event, an incident, or an error. Sentinel events give useful information if they are studied in highly engineered and standardized organizations like laboratories or tissue establishments, but they show several limits in the analysis of organ donation, retrieval, and transplantation processes, which are characterized by prevailing human factors, with high intrinsic risk and variability. Thus, they are poorly effective to deliver sure elements to base safety management improvement programs, especially regarding

Taking up national safety alerts to improve patient safety in hospitals: The perspective of healthcare quality and risk managers.

PubMed

Pfeiffer, Yvonne; Schwappach, David

2016-01-01

National safety alert systems publish relevant information to improve patient safety in hospitals. However, the information has to be transformed into local action to have an effect on patient safety. We studied three research questions: How do Swiss healthcare quality and risk managers (qm/rm(1)) see their own role in learning from safety alerts issued by the Swiss national voluntary reporting and analysis system? What are their attitudes towards and evaluations of the alerts, and which types of improvement actions were fostered by the safety alerts? A survey was developed and applied to Swiss healthcare risk and quality managers, with a response rate of 39 % (n=116). Descriptive statistics are presented. The qm/rm disseminate and communicate with a broad variety of professional groups about the alerts. While most respondents felt that they should know the alerts and their contents, only a part of them felt responsible for driving organizational change based on the recommendations. However, most respondents used safety alerts to back up their own patient safety goals. The alerts were evaluated positively on various dimensions such as usefulness and were considered as standards of good practice by the majority of the respondents. A range of organizational responses was applied, with disseminating information being the most common. An active role is related to using safety alerts for backing up own patient safety goals. To support an active role of qm/rm in their hospital's learning from safety alerts, appropriate organizational structures should be developed. Furthermore, they could be given special information or training to act as an information hub on the issues discussed in the alerts. Copyright © 2016. Published by Elsevier GmbH.

Safety Management Systems.

ERIC Educational Resources Information Center

Fido, A. T.; Wood, D. O.

This document discusses the issues that need to be considered by the education and training system as it responds to the changing needs of industry in Great Britain. Following a general introduction, the development of quality management ideas is traced. The underlying principles of safety and risk management are clarified and the implications of…

From aviation to medicine: applying concepts of aviation safety to risk management in ambulatory care.

PubMed

Wilf-Miron, R; Lewenhoff, I; Benyamini, Z; Aviram, A

2003-02-01

The development of a medical risk management programme based on the aviation safety approach and its implementation in a large ambulatory healthcare organisation is described. The following key safety principles were applied: (1). errors inevitably occur and usually derive from faulty system design, not from negligence; (2). accident prevention should be an ongoing process based on open and full reporting; (3). major accidents are only the "tip of the iceberg" of processes that indicate possibilities for organisational learning. Reporting physicians were granted immunity, which encouraged open reporting of errors. A telephone "hotline" served the medical staff for direct reporting and receipt of emotional support and medical guidance. Any adverse event which had learning potential was debriefed, while focusing on the human cause of error within a systemic context. Specific recommendations were formulated to rectify processes conducive to error when failures were identified. During the first 5 years of implementation, the aviation safety concept and tools were successfully adapted to ambulatory care, fostering a culture of greater concern for patient safety through risk management while providing support to the medical staff.

Medical-device risk management and public safety: using cost-benefit as a measurement of effectiveness

NASA Astrophysics Data System (ADS)

Hughes, Allen A.

1994-12-01

Public safety can be enhanced through the development of a comprehensive medical device risk management. This can be accomplished through case studies using a framework that incorporates cost-benefit analysis in the evaluation of risk management attributes. This paper presents a framework for evaluating the risk management system for regulatory Class III medical devices. The framework consists of the following sixteen attributes of a comprehensive medical device risk management system: fault/failure analysis, premarket testing/clinical trials, post-approval studies, manufacturer sponsored hospital studies, product labeling, establishment inspections, problem reporting program, mandatory hospital reporting, medical literature surveillance, device/patient registries, device performance monitoring, returned product analysis, autopsy program, emergency treatment funds/interim compensation, product liability, and alternative compensation mechanisms. Review of performance histories for several medical devices can reveal the value of information for many attributes, and also the inter-dependencies of the attributes in generating risk information flow. Such an information flow network is presented as a starting point for enhancing medical device risk management by focusing on attributes with high net benefit values and potential to spur information dissemination.

Effective Safety Management in Construction Project

NASA Astrophysics Data System (ADS)

Othman, I.; Shafiq, Nasir; Nuruddin, M. F.

2017-12-01

Effective safety management is one of the serious problems in the construction industry worldwide, especially in large-scale construction projects. There have been significant reductions in the number and the rate of injury over the last 20 years. Nevertheless, construction remains as one of the high risk industry. The purpose of this study is to examine safety management in the Malaysian construction industry, as well as to highlight the importance of construction safety management. The industry has contributed significantly to the economic growth of the country. However, when construction safety management is not implemented systematically, accidents will happen and this can affect the economic growth of the country. This study put the safety management in construction project as one of the important elements to project performance and success. The study emphasize on awareness and the factors that lead to the safety cases in construction project.

Risk Management in Cocurricular Activities.

ERIC Educational Resources Information Center

Webb, Edward M.

1988-01-01

Discusses risk management for colleges' cocurricular activities. Discusses tort liability, contributory negligence, and assumption of risk. Provides six concrete steps for managing risks responsibly and professionally: adopting an educational mission statement, assigning risk to others, establishing safety standards, training club advisors,…

University building safety index measurement using risk and implementation matrix

NASA Astrophysics Data System (ADS)

Rahman, A.; Arumsari, F.; Maryani, A.

2018-04-01

Many high rise building constructed in several universities in Indonesia. The high-rise building management must provide the safety planning and proper safety equipment in each part of the building. Unfortunately, most of the university in Indonesia have not been applying safety policy yet and less awareness on treating safety facilities. Several fire accidents in university showed that some significant risk should be managed by the building management. This research developed a framework for measuring the high rise building safety index in university The framework is not only assessed the risk magnitude but also designed modular building safety checklist for measuring the safety implementation level. The safety checklist has been developed for 8 types of the university rooms, i.e.: office, classroom, 4 type of laboratories, canteen, and library. University building safety index determined using risk-implementation matrix by measuring the risk magnitude and assessing the safety implementation level. Building Safety Index measurement has been applied in 4 high rise buildings in ITS Campus. The building assessment showed that the rectorate building in secure condition and chemical department building in beware condition. While the library and administration center building was in less secure condition.

Safety management and risk assessment in chemical laboratories.

PubMed

Marendaz, Jean-Luc; Friedrich, Kirstin; Meyer, Thierry

2011-01-01

The present paper highlights a new safety management program, MICE (Management, Information, Control and Emergency), which has been specifically adapted for the academic environment. The process starts with an exhaustive hazard inventory supported by a platform assembling specific hazards encountered in laboratories and their subsequent classification. A proof of concept is given by a series of implementations in the domain of chemistry targeting workplace health protection. The methodology is expressed through three examples to illustrate how the MICE program can be used to address safety concerns regarding chemicals, strong magnetic fields and nanoparticles in research laboratories. A comprehensive chemical management program is also depicted.

[OCCUPATIONAL HEALTH RISK ASSESSMENT AND MANAGEMENT IN WORKERS IN IMPROVEMENT OF NATIONAL POLICY IN OCCUPATIONAL HYGIENE AND SAFETY].

PubMed

Shur, P Z; Zaĭtseva, N V; Alekseev, V B; Shliapnikov, D M

2015-01-01

In accordance with the international documents in the field of occupational safety and hygiene, the assessment and minimization of occupational risks is a key instrument for the health maintenance of workers. One of the main ways to achieve it is the minimization of occupational risks. Correspondingly, the instrument for the implementation of this method is the methodology of analysis of occupational risks. In Russian Federation there were the preconditions for the formation of the system for the assessment and management of occupational risks. As the target of the national (state) policy in the field of occupational safety in accordance with ILO Conventions it can be offered the prevention of accidents and injuries to health arising from work or related with it, minimizing the causes of hazards inherent in the working environment, as far as it is reasonably and practically feasible. Global trend ofusing the methodology of the assessment and management of occupational risks to life and health of citizens requires the improvement of national policies in the field of occupational hygiene and safety. Achieving an acceptable level of occupational risk in the formation of national policy in the field of occupational hygiene and safety can be considered as one of the main tasks.

From aviation to medicine: applying concepts of aviation safety to risk management in ambulatory care

PubMed Central

Wilf-Miron, R; Lewenhoff, I; Benyamini, Z; Aviram, A

2003-01-01



 The development of a medical risk management programme based on the aviation safety approach and its implementation in a large ambulatory healthcare organisation is described. The following key safety principles were applied: (1) errors inevitably occur and usually derive from faulty system design, not from negligence; (2) accident prevention should be an ongoing process based on open and full reporting; (3) major accidents are only the "tip of the iceberg" of processes that indicate possibilities for organisational learning. Reporting physicians were granted immunity, which encouraged open reporting of errors. A telephone "hotline" served the medical staff for direct reporting and receipt of emotional support and medical guidance. Any adverse event which had learning potential was debriefed, while focusing on the human cause of error within a systemic context. Specific recommendations were formulated to rectify processes conducive to error when failures were identified. During the first 5 years of implementation, the aviation safety concept and tools were successfully adapted to ambulatory care, fostering a culture of greater concern for patient safety through risk management while providing support to the medical staff. PMID:12571343

Awareness and Perceptions of Food Safety Risks and Risk Management in Poultry Production and Slaughter: A Qualitative Study of Direct-Market Poultry Producers in Maryland.

PubMed

Baron, Patrick; Frattaroli, Shannon

2016-01-01

The objective of this study was to document and understand the perceptions and opinions of small-scale poultry producers who market directly to consumers about microbial food safety risks in the poultry supply chain. Between January and November 2014, we conducted semi-structured, in-depth interviews with a convenience sample of 16 owner-operators of Maryland direct-market commercial poultry farms. Three overarching thematic categories emerged from these interviews that describe: 1) characteristics of Maryland direct-market poultry production and processing; 2) microbial food safety risk awareness and risk management in small-scale poultry production, slaughter and processing; and 3) motivations for prioritizing food safety in the statewide direct-market poultry supply chain. Key informants provided valuable insights on many topics relevant to evaluating microbial food safety in the Maryland direct-market poultry supply chain, including: direct-market poultry production and processing practices and models, perspectives on issues related to food safety risk management, perspectives on direct-market agriculture economics and marketing strategies, and ideas for how to enhance food safety at the direct-market level of the Maryland poultry supply chain. The findings have policy implications and provide insights into food safety in small-scale commercial poultry production, processing, distribution and retail. In addition, the findings will inform future food safety research on the small-scale US poultry supply chain.

Awareness and Perceptions of Food Safety Risks and Risk Management in Poultry Production and Slaughter: A Qualitative Study of Direct-Market Poultry Producers in Maryland

PubMed Central

Baron, Patrick; Frattaroli, Shannon

2016-01-01

The objective of this study was to document and understand the perceptions and opinions of small-scale poultry producers who market directly to consumers about microbial food safety risks in the poultry supply chain. Between January and November 2014, we conducted semi-structured, in-depth interviews with a convenience sample of 16 owner-operators of Maryland direct-market commercial poultry farms. Three overarching thematic categories emerged from these interviews that describe: 1) characteristics of Maryland direct-market poultry production and processing; 2) microbial food safety risk awareness and risk management in small-scale poultry production, slaughter and processing; and 3) motivations for prioritizing food safety in the statewide direct-market poultry supply chain. Key informants provided valuable insights on many topics relevant to evaluating microbial food safety in the Maryland direct-market poultry supply chain, including: direct-market poultry production and processing practices and models, perspectives on issues related to food safety risk management, perspectives on direct-market agriculture economics and marketing strategies, and ideas for how to enhance food safety at the direct-market level of the Maryland poultry supply chain. The findings have policy implications and provide insights into food safety in small-scale commercial poultry production, processing, distribution and retail. In addition, the findings will inform future food safety research on the small-scale US poultry supply chain. PMID:27341034

Product Engineering Class in the Software Safety Risk Taxonomy for Building Safety-Critical Systems

NASA Technical Reports Server (NTRS)

Hill, Janice; Victor, Daniel

2008-01-01

When software safety requirements are imposed on legacy safety-critical systems, retrospective safety cases need to be formulated as part of recertifying the systems for further use and risks must be documented and managed to give confidence for reusing the systems. The SEJ Software Development Risk Taxonomy [4] focuses on general software development issues. It does not, however, cover all the safety risks. The Software Safety Risk Taxonomy [8] was developed which provides a construct for eliciting and categorizing software safety risks in a straightforward manner. In this paper, we present extended work on the taxonomy for safety that incorporates the additional issues inherent in the development and maintenance of safety-critical systems with software. An instrument called a Software Safety Risk Taxonomy Based Questionnaire (TBQ) is generated containing questions addressing each safety attribute in the Software Safety Risk Taxonomy. Software safety risks are surfaced using the new TBQ and then analyzed. In this paper we give the definitions for the specialized Product Engineering Class within the Software Safety Risk Taxonomy. At the end of the paper, we present the tool known as the 'Legacy Systems Risk Database Tool' that is used to collect and analyze the data required to show traceability to a particular safety standard

Systematic implementation of clinical risk management in a large university hospital: the impact of risk managers.

PubMed

Sendlhofer, Gerald; Brunner, Gernot; Tax, Christa; Falzberger, Gebhard; Smolle, Josef; Leitgeb, Karina; Kober, Brigitte; Kamolz, Lars Peter

2015-01-01

For health care systems in recent years, patient safety has increasingly become a priority issue. National and international strategies have been considered to attempt to overcome the most prominent hazards while patients are receiving health care. Thereby, clinical risk management (CRM) plays a dominant role in enabling the identification, analysis, and management of potential risks. CRM implementation into routine procedures within complex hospital organizations is challenging, as in the past, organizational change strategies using a top-down approach have often failed. Therefore, one of our main objectives was to educate a certain number of risk managers in facilitating CRM using a bottom-up approach. To achieve our primary purpose, five project strands were developed, and consequently followed, introducing CRM: corporate governance, risk management (RM) training, CRM process, information, and involvement. The core part of the CRM process involved the education of risk managers within each organizational unit. To account for the size of the existing organization, we assumed that a minimum of 1 % of the workforce had to be trained in RM to disseminate the continuous improvement of quality and safety. Following a roll-out plan, CRM was introduced in each unit and potential risks were identified. Alongside the changes in the corporate governance, a hospital-wide CRM process was introduced resulting in 158 trained risk managers correlating to 2.0 % of the total workforce. Currently, risk managers are present in every unit and have identified 360 operational risks. Among those, 176 risks were scored as strategic and clustered together into top risks. Effective meeting structures and opportunities to share information and knowledge were introduced. Thus far, 31 units have been externally audited in CRM. The CRM approach is unique with respect to its dimension; members of all health care professions were trained to be able to identify potential risks. A network of risk

Safety management in a relationship-oriented culture.

PubMed

Hsu, Shang Hwa; Lee, Chun-Chia

2012-01-01

A relationship-oriented culture predominates in the Greater China region, where it is more important than in Western countries. Some characteristics of this culture influence strongly the organizational structure and interactions among members in an organization. This study aimed to explore the possible influence of relationships on safety management in relationship-oriented cultures. We hypothesized that organizational factors (management involvement and harmonious relationships) within a relationship-oriented culture would influence supervisory work (ongoing monitoring and task instructions), the reporting system (selective reporting), and teamwork (team communication and co-ordination) in safety management at a group level, which would in turn influence individual reliance complacency, risk awareness, and practices. We distributed a safety climate questionnaire to the employees of Taiwanese high-risk industries. The results of structural equation modeling supported the hypothesis. This article also discusses the findings and implications for safety improvement in countries with a relationship-oriented culture.

Estimating and controlling workplace risk: an approach for occupational hygiene and safety professionals.

PubMed

Toffel, Michael W; Birkner, Lawrence R

2002-07-01

The protection of people and physical assets is the objective of health and safety professionals and is accomplished through the paradigm of anticipation, recognition, evaluation, and control of risks in the occupational environment. Risk assessment concepts are not only used by health and safety professionals, but also by business and financial planners. Since meeting health and safety objectives requires financial resources provided by business and governmental managers, the hypothesis addressed here is that health and safety risk decisions should be made with probabilistic processes used in financial decision-making and which are familiar and recognizable to business and government planners and managers. This article develops the processes and demonstrates the use of incident probabilities, historic outcome information, and incremental impact analysis to estimate risk of multiple alternatives in the chemical process industry. It also analyzes how the ethical aspects of decision-making can be addressed in formulating health and safety risk management plans. It is concluded that certain, easily understood, and applied probabilistic risk assessment methods used by business and government to assess financial and outcome risk have applicability to improving workplace health and safety in three ways: 1) by linking the business and health and safety risk assessment processes to securing resources, 2) by providing an additional set of tools for health and safety risk assessment, and 3) by requiring the risk assessor to consider multiple risk management alternatives.

Risk Assessment in the UK Health and Safety System: Theory and Practice.

PubMed

Russ, Karen

2010-09-01

In the UK, a person or organisation that creates risk is required to manage and control that risk so that it is reduced 'So Far As Is Reasonably Practicable' (SFAIRP). How the risk is managed is to be determined by those who create the risk. They have a duty to demonstrate that they have taken action to ensure all risk is reduced SFAIRP and must have documentary evidence, for example a risk assessment or safety case, to prove that they manage the risks their activities create. The UK Health and Safety Executive (HSE) does not tell organisations how to manage the risks they create but does inspect the quality of risk identification and management. This paper gives a brief overview of where responsibility for occupational health and safety lies in the UK, and how risk should be managed through risk assessment. The focus of the paper is three recent major UK incidents, all involving fatalities, and all of which were wholly avoidable if risks had been properly assessed and managed. The paper concludes with an analysis of the common failings of risk assessments and key actions for improvement.

The risk management professional and medication safety.

PubMed

Cohen, Hedy; Tuohy, Nancy; Carroll, Roberta

2009-01-01

ASHRM is committed to the future development of the healthcare risk management profession. A key contribution to this commitment is the creation of a student version of ASHRM's best-selling Risk Management Handbook for Healthcare Organizations. The Student Edition was released this spring. It is now being made available to universities and colleges to incorporate into their degree programs.

Risk Management: A Leader's Responsibility.

ERIC Educational Resources Information Center

Rowe, Roger E.

1997-01-01

Discusses what facilities management leaders can do to ensure the safety of students and employees. Focuses on six specific tasks, such as detecting hazards and assessing the risks, and offers three rules underlying the application of risk management, including do not accept unnecessary risk. Provides an outline of prevention responsibilities.…

Perspectives: Intellectual Risk Management

ERIC Educational Resources Information Center

Hall, James C.

2013-01-01

Ask a college administrator about students and risk management, and you're likely to get a quick and agitated speech about alcohol consumption and bad behavior or a meditation on mental health and campus safety. But in colleges and universities, we manage intellectual risk-taking too. Bring that up, and you'll probably get little out of that same…

Managing Risk Assessment in Science Departments.

ERIC Educational Resources Information Center

Forlin, Peter; Forlin, Chris

1997-01-01

Describes a health-and-safety risk-management audit in four Queensland, Australia high schools. One major outcome of this research project is the development of a comprehensive risk-management policy in compliance with the law. Other outcomes include the preparation of a professional-development package in risk-management policy for use as a…

Establishing a proactive safety and health risk management system in the fire service.

PubMed

Poplin, Gerald S; Pollack, Keshia M; Griffin, Stephanie; Day-Nash, Virginia; Peate, Wayne F; Nied, Ed; Gulotta, John; Burgess, Jefferey L

2015-04-19

Formalized risk management (RM) is an internationally accepted process for reducing hazards in the workplace, with defined steps including hazard scoping, risk assessment, and implementation of controls, all within an iterative process. While required for all industry in the European Union and widely used elsewhere, the United States maintains a compliance-based regulatory structure, rather than one based on systematic, risk-based methodologies. Firefighting is a hazardous profession, with high injury, illness, and fatality rates compared with other occupations, and implementation of RM programs has the potential to greatly improve firefighter safety and health; however, no descriptions of RM implementation are in the peer-reviewed literature for the North American fire service. In this paper we describe the steps used to design and implement the RM process in a moderately-sized fire department, with particular focus on prioritizing and managing injury hazards during patient transport, fireground, and physical exercise procedures. Hazard scoping and formalized risk assessments are described, in addition to the identification of participatory-led injury control strategies. Process evaluation methods were conducted to primarily assess the feasibility of voluntarily instituting the RM approach within the fire service setting. The RM process was well accepted by the fire department and led to development of 45 hazard specific-interventions. Qualitative data documenting the implementation of the RM process revealed that participants emphasized the: value of the RM process, especially the participatory bottom-up approach; usefulness of the RM process for breaking down tasks to identify potential risks; and potential of RM for reducing firefighter injury. As implemented, this risk-based approach used to identify and manage occupational hazards and risks was successful and is deemed feasible for U.S. (and other) fire services. While several barriers and challenges do exist

Another Approach to Enhance Airline Safety: Using Management Safety Tools

NASA Technical Reports Server (NTRS)

Lu, Chien-tsug; Wetmore, Michael; Przetak, Robert

2006-01-01

The ultimate goal of conducting an accident investigation is to prevent similar accidents from happening again and to make operations safer system-wide. Based on the findings extracted from the investigation, the "lesson learned" becomes a genuine part of the safety database making risk management available to safety analysts. The airline industry is no exception. In the US, the FAA has advocated the usage of the System Safety concept in enhancing safety since 2000. Yet, in today s usage of System Safety, the airline industry mainly focuses on risk management, which is a reactive process of the System Safety discipline. In order to extend the merit of System Safety and to prevent accidents beforehand, a specific System Safety tool needs to be applied; so a model of hazard prediction can be formed. To do so, the authors initiated this study by reviewing 189 final accident reports from the National Transportation Safety Board (NTSB) covering FAR Part 121 scheduled operations. The discovered accident causes (direct hazards) were categorized into 10 groups Flight Operations, Ground Crew, Turbulence, Maintenance, Foreign Object Damage (FOD), Flight Attendant, Air Traffic Control, Manufacturer, Passenger, and Federal Aviation Administration. These direct hazards were associated with 36 root factors prepared for an error-elimination model using Fault Tree Analysis (FTA), a leading tool for System Safety experts. An FTA block-diagram model was created, followed by a probability simulation of accidents. Five case studies and reports were provided in order to fully demonstrate the usefulness of System Safety tools in promoting airline safety.

Safety Priorities and Underestimations in Recreational Scuba Diving Operations: A European Study Supporting the Implementation of New Risk Management Programmes

PubMed Central

Lucrezi, Serena; Egi, Salih Murat; Pieri, Massimo; Burman, Francois; Ozyigit, Tamer; Cialoni, Danilo; Thomas, Guy; Marroni, Alessandro; Saayman, Melville

2018-01-01

Introduction: Scuba diving is an important marine tourism sector, but requires proper safety standards to reduce the risks and increase accessibility to its market. To achieve safety goals, safety awareness and positive safety attitudes in recreational scuba diving operations are essential. However, there is no published research exclusively focusing on scuba divers’ and dive centres’ perceptions toward safety. This study assessed safety perceptions in recreational scuba diving operations, with the aim to inform and enhance safety and risk management programmes within the scuba diving tourism industry. Materials and Methods: Two structured questionnaire surveys were prepared by the organisation Divers Alert Network and administered online to scuba diving operators in Italy and scuba divers in Europe, using a mixture of convenience and snowball sampling. Questions in the survey included experience and safety offered at the dive centre; the buddy system; equipment and accessories for safe diving activities; safety issues in the certification of new scuba divers; incidents/accidents; and attitudes toward safety. Results: 91 scuba diving centres and 3,766 scuba divers participated in the study. Scuba divers gave importance to safety and the responsiveness of service providers, here represented by the dive centres. However, they underestimated the importance of a personal emergency action/assistance plan and, partly, of the buddy system alongside other safety procedures. Scuba divers agreed that some risks, such as those associated with running out of gas, deserve attention. Dive centres gave importance to aspects such as training and emergency action/assistance plans. However, they were limitedly involved in safety campaigning. Dive centres’ perceptions of safety in part aligned with those of scuba divers, with some exceptions. Conclusion: Greater responsibility is required in raising awareness and educating scuba divers, through participation in prevention

Safety Priorities and Underestimations in Recreational Scuba Diving Operations: A European Study Supporting the Implementation of New Risk Management Programmes.

PubMed

Lucrezi, Serena; Egi, Salih Murat; Pieri, Massimo; Burman, Francois; Ozyigit, Tamer; Cialoni, Danilo; Thomas, Guy; Marroni, Alessandro; Saayman, Melville

2018-01-01

Introduction: Scuba diving is an important marine tourism sector, but requires proper safety standards to reduce the risks and increase accessibility to its market. To achieve safety goals, safety awareness and positive safety attitudes in recreational scuba diving operations are essential. However, there is no published research exclusively focusing on scuba divers' and dive centres' perceptions toward safety. This study assessed safety perceptions in recreational scuba diving operations, with the aim to inform and enhance safety and risk management programmes within the scuba diving tourism industry. Materials and Methods: Two structured questionnaire surveys were prepared by the organisation Divers Alert Network and administered online to scuba diving operators in Italy and scuba divers in Europe, using a mixture of convenience and snowball sampling. Questions in the survey included experience and safety offered at the dive centre; the buddy system; equipment and accessories for safe diving activities; safety issues in the certification of new scuba divers; incidents/accidents; and attitudes toward safety. Results: 91 scuba diving centres and 3,766 scuba divers participated in the study. Scuba divers gave importance to safety and the responsiveness of service providers, here represented by the dive centres. However, they underestimated the importance of a personal emergency action/assistance plan and, partly, of the buddy system alongside other safety procedures. Scuba divers agreed that some risks, such as those associated with running out of gas, deserve attention. Dive centres gave importance to aspects such as training and emergency action/assistance plans. However, they were limitedly involved in safety campaigning. Dive centres' perceptions of safety in part aligned with those of scuba divers, with some exceptions. Conclusion: Greater responsibility is required in raising awareness and educating scuba divers, through participation in prevention campaigns

Managing occupational risk in creative practice: a new perspective for occupational health and safety.

PubMed

Oughton, Nicholas

2013-01-01

There has been little recognition of the fact that creative production operates in a somewhat different environment and timeframe to that associated with traditional industries. This has resulted in the application of an orthodox, generic or ``one size fits all'' framework of Occupational Health and Safety (OHS) systems across all industries. With the rapid growth of ``creative industry,'' certain challenges arise from the application of this "generic" strategy, mainly because the systems currently employed may not be entirely suitable for creative practice. Some OHS practitioners suggest that the current OHS paradigm is failing. This paper questions the appropriateness of applying a twentieth century OHS model in the present industrial context, and considers what framework will best provide for the well-being of creative workers and their enterprise in the twenty-first century. The paper questions the notion of "Risk" and the paradox associated with "Risk Management," particularly in the context of the creative process. Clearly, risk taking contributes to creative enterprise and effective risk management should accommodate both risk minimization and risk exploitation.

Bayesian-network-based safety risk assessment for steel construction projects.

PubMed

Leu, Sou-Sen; Chang, Ching-Miao

2013-05-01

There are four primary accident types at steel building construction (SC) projects: falls (tumbles), object falls, object collapse, and electrocution. Several systematic safety risk assessment approaches, such as fault tree analysis (FTA) and failure mode and effect criticality analysis (FMECA), have been used to evaluate safety risks at SC projects. However, these traditional methods ineffectively address dependencies among safety factors at various levels that fail to provide early warnings to prevent occupational accidents. To overcome the limitations of traditional approaches, this study addresses the development of a safety risk-assessment model for SC projects by establishing the Bayesian networks (BN) based on fault tree (FT) transformation. The BN-based safety risk-assessment model was validated against the safety inspection records of six SC building projects and nine projects in which site accidents occurred. The ranks of posterior probabilities from the BN model were highly consistent with the accidents that occurred at each project site. The model accurately provides site safety-management abilities by calculating the probabilities of safety risks and further analyzing the causes of accidents based on their relationships in BNs. In practice, based on the analysis of accident risks and significant safety factors, proper preventive safety management strategies can be established to reduce the occurrence of accidents on SC sites. Copyright © 2013 Elsevier Ltd. All rights reserved.

75 FR 68224 - Safety Management Systems for Part 121 Certificate Holders

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-05

... the general framework for an organization-wide safety management approach to air carrier operations... System? An SMS is an organization-wide approach to managing safety risk and assuring the effectiveness of... under 14 CFR part 121 to develop and implement a safety management system (SMS) to improve the safety of...

Identifying and Managing Risk.

ERIC Educational Resources Information Center

Abraham, Janice M.

1999-01-01

The role of the college or university chief financial officer in institutional risk management is (1) to identify risk (physical, casualty, fiscal, business, reputational, workplace safety, legal liability, employment practices, general liability), (2) to develop a campus plan to reduce and control risk, (3) to transfer risk, and (4) to track and…

The Attitude of Civil Engineering Students towards Health and Safety Risk Management: A Case Study

ERIC Educational Resources Information Center

Petersen, A. K.; Reynolds, J. H.; Ng, L. W. T.

2008-01-01

The highest rate of accidents and injuries in British industries has been reported by the construction industry during the past decade. Since then stakeholders have recognised that a possible solution would be to inculcate a good attitude towards health and safety risk management in undergraduate civil engineering students and construction…

Safety Risk Knowledge Elicitation in Support of Aeronautical R and D Portfolio Management: A Case Study

NASA Technical Reports Server (NTRS)

Shih, Ann T.; Ancel, Ersin; Jones, Sharon Monica; Reveley, Mary S.; Luxhoj, James T.

2012-01-01

Aviation is a problem domain characterized by a high level of system complexity and uncertainty. Safety risk analysis in such a domain is especially challenging given the multitude of operations and diverse stakeholders. The Federal Aviation Administration (FAA) projects that by 2025 air traffic will increase by more than 50 percent with 1.1 billion passengers a year and more than 85,000 flights every 24 hours contributing to further delays and congestion in the sky (Circelli, 2011). This increased system complexity necessitates the application of structured safety risk analysis methods to understand and eliminate where possible, reduce, and/or mitigate risk factors. The use of expert judgments for probabilistic safety analysis in such a complex domain is necessary especially when evaluating the projected impact of future technologies, capabilities, and procedures for which current operational data may be scarce. Management of an R&D product portfolio in such a dynamic domain needs a systematic process to elicit these expert judgments, process modeling results, perform sensitivity analyses, and efficiently communicate the modeling results to decision makers. In this paper a case study focusing on the application of an R&D portfolio of aeronautical products intended to mitigate aircraft Loss of Control (LOC) accidents is presented. In particular, the knowledge elicitation process with three subject matter experts who contributed to the safety risk model is emphasized. The application and refinement of a verbal-numerical scale for conditional probability elicitation in a Bayesian Belief Network (BBN) is discussed. The preliminary findings from this initial step of a three-part elicitation are important to project management practitioners as they illustrate the vital contribution of systematic knowledge elicitation in complex domains.

Biosimilars: pharmacovigilance and risk management.

PubMed

Zuñiga, Leyre; Calvo, Begoña

2010-07-01

Biosimilars cannot be authorized based on the same requirements that apply to generic medicines. Despite the fact that the biosimilar and reference drug can show similar efficacy, the biosimilar may exhibit different safety profile in terms of nature, seriousness or incidence of adverse reactions. However, the data from pre-authorization clinical studies normally are insufficient to identify all potential differences. Therefore, clinical safety of similar biological medicinal products must be monitored closely on an ongoing basis during the post-approval phase including continued risk-benefit assessment. The biosimilar applicant must provide the European Medicines Agency (EMEA) with a risk management plan (EU-RMP) and pharmacovigilance programme with its application, including a description of the potential safety issues associated with the similar biological medicinal product that may be a result of differences in the manufacturing process from the reference biologic. The most critical safety concern relating to biopharmaceuticals (including biosimilars) is immunogenicity. Risk management applies scientifically based methodologies to identify, assess, communicate and minimise risk throughout a drug's life cycle so as to establish and maintain a favourable benefit-risk profile in patients. The risk management plan for biosimilars should focus on heightens the pharmacovigilance measures, identify immunogenicity risk and implement special post-marketing surveillance. Although International Nonproprietary Names (INNs) served as a useful tool in worldwide pharmacovigilance, for biologicals they should not be relied upon as the only means of product identification. Biologicals should always be commercialized with a brand name or the INN plus the manufacturer's name. (c) 2010 John Wiley & Sons, Ltd.

Critical factors and paths influencing construction workers' safety risk tolerances.

PubMed

Wang, Jiayuan; Zou, Patrick X W; Li, Penny P

2016-08-01

While workers' safety risk tolerances have been regarded as a main reason for their unsafe behaviors, little is known about why different people have different risk tolerances even when confronting the same situation. The aim of this research is to identify the critical factors and paths that influence workers' safety risk tolerance and to explore how they contribute to accident causal model from a system thinking perceptive. A number of methods were carried out to analyze the data collected through interviews and questionnaire surveys. In the first and second steps of the research, factor identification, factor ranking and factor analysis were carried out, and the results show that workers' safety risk tolerance can be influenced by four groups of factors, namely: (1) personal subjective perception; (2) work knowledge and experiences; (3) work characteristics; and (4) safety management. In the third step of the research, hypothetical influencing path model was developed and tested by using structural equation modeling (SEM). It is found that the effects of external factors (safety management and work characteristics) on risk tolerance are larger than that of internal factors (personal subjective perception and work knowledge & experiences). Specifically, safety management contributes the most to workers' safety risk tolerance through its direct effect and indirect effect; while personal subjective perception comes the second and can act as an intermedia for work characteristics. This research provides an in-depth insight of workers' unsafe behaviors by depicting the contributing factors as shown in the accident causal model developed in this research. Copyright © 2015 Elsevier Ltd. All rights reserved.

Obstetrics Hospitalists: Risk Management Implications.

PubMed

Veltman, Larry

2015-09-01

The concept of having an in-house obstetrician (serving as an obstetrics [OB] hospitalist) available 24 hours a day, 7 days a week provides a safety net for OB events that many need immediate intervention for a successful outcome. A key precept of risk management, that of loss prevention, fits perfectly with the addition of an OB hospitalist role in the perinatal department. Inherent in the role of OB hospitalists are the patient safety and risk management principles of improved communication, enhanced readiness, and immediate availability. Copyright © 2015 Elsevier Inc. All rights reserved.

International comparative analyses of healthcare risk management.

PubMed

Sun, Niuyun; Wang, Li; Zhou, Jun; Yuan, Qiang; Zhang, Zongjiu; Li, Youping; Liang, Minghui; Cheng, Lan; Gao, Guangming; Cui, Xiaohui

2011-02-01

Interpretation of the growing body of global literature on health care risk is compromised by a lack of common understanding and language. This series of articles aims to comprehensively compare laws and regulations, institutional management, and administration of incidence reporting systems on medical risk management in the United Kingdom, the United States, Canada, Australia, and Taiwan, so as to provide evidence and recommendations for health care risk management policy in China. We searched the official websites of the healthcare risk management agencies of the four countries and one district for laws, regulatory documents, research reports, reviews and evaluation forms concerned with healthcare risk management and assessment. Descriptive comparative analysis was performed on relevant documents. A total of 146 documents were included in this study, including 2 laws (1.4%), 17 policy documents (11.6%), 41 guidance documents (28.1%), 37 reviews (25.3%), and 49 documents giving general information (33.6%). The United States government implemented one law and one rule of patient safety management, while the United Kingdom and Australia each issued professional guidances on patient safety improvement. The four countries implemented patient safety management policy on four different levels: national, state/province, hospital, and non-governmental organization. The four countries and one district adopted four levels of patient safety management, and the administration modes can be divided into an "NGO-led mode" represented by the United States and Canada and a "government-led mode" represented by the United Kingdom, Australia, and Taiwan. © 2011 Blackwell Publishing Asia Pty Ltd and Chinese Cochrane Center, West China Hospital of Sichuan University.

Management capacity to promote nurse workplace health and safety.

PubMed

Fang, Yaxuan; McDonald, Tracey

2018-04-01

To investigate regarding workplace health and safety factors, and to identify strategies to preserve and promote a healthy nursing workplace. Data collected using the Delphi technique with input from 41 key informants across four participant categories drawn from a Chinese university and four hospitals were thematically analysed. Most respondents agreed on the importance of nurses' health and safety, and that nurse managers should act to protect nurses, but not enough on workplace safety. Hospital policies, staff disempowerment, workload and workplace conflicts are major obstacles. The reality of Chinese nurses' workplaces is that health and safety risks abound and relate to socio-cultural expectations of women. Self-management of risks is neccessary, gaps exist in understanding of workplace risks among different nursing groups and their perceptions of the professional status, and the value of nurses' contribution to ongoing risks in the hospital workplace. The Chinese hospital system must make these changes to produce a safer working environment for nurses. This research, based in China, presents an instructive tale for all countries that need support on the types and amounts of management for nurses working at the clinical interface, and on the consequences of management neglect of relevant policies and procedures. © 2017 John Wiley & Sons Ltd.

The NASA Risk Management Program

NASA Technical Reports Server (NTRS)

Buchbinder, Benjamin

1990-01-01

This paper describes the NASA Risk Management Program established by the Headquarters Office of Safety and Mission Quality (MSQ). Current agency policy is outlined, risk management assistance to the field is described, and examples are given of independent risk assessments conducted by SMQ. The motivation for and the structure of the program is placed in the historical context of pre- and post-Challenger environments.

[What Surgeons Should Know about Risk Management].

PubMed

Strametz, R; Tannheimer, M; Rall, M

2017-02-01

Background: The fact that medical treatment is associated with errors has long been recognized. Based on the principle of "first do no harm", numerous efforts have since been made to prevent such errors or limit their impact. However, recent statistics show that these measures do not sufficiently prevent grave mistakes with serious consequences. Preventable mistakes such as wrong patient or wrong site surgery still frequently occur in error statistics. Methods: Based on insight from research on human error, in due consideration of recent legislative regulations in Germany, the authors give an overview of the clinical risk management tools needed to identify risks in surgery, analyse their causes, and determine adequate measures to manage those risks depending on their relevance. The use and limitations of critical incident reporting systems (CIRS), safety checklists and crisis resource management (CRM) are highlighted. Also the rationale for IT systems to support the risk management process is addressed. Results/Conclusion: No single tool of risk management can be effective as a standalone instrument, but unfolds its effect only when embedded in a superordinate risk management system, which integrates tailor-made elements to increase patient safety into the workflows of each organisation. Competence in choosing adequate tools, effective IT systems to support the risk management process as well as leadership and commitment to constructive handling of human error are crucial components to establish a safety culture in surgery. Georg Thieme Verlag KG Stuttgart · New York.

NYC CV Pilot Deployment : Safety Management Plan : New York City.

DOT National Transportation Integrated Search

2016-04-22

This safety management plan identifies preliminary safety hazards associated with the New York City Connected Vehicle Pilot Deployment project. Each of the hazards is rated, and a plan for managing the risks through detailed design and deployment is ...

Engineered nanomaterials: toward effective safety management in research laboratories.

PubMed

Groso, Amela; Petri-Fink, Alke; Rothen-Rutishauser, Barbara; Hofmann, Heinrich; Meyer, Thierry

2016-03-15

It is still unknown which types of nanomaterials and associated doses represent an actual danger to humans and environment. Meanwhile, there is consensus on applying the precautionary principle to these novel materials until more information is available. To deal with the rapid evolution of research, including the fast turnover of collaborators, a user-friendly and easy-to-apply risk assessment tool offering adequate preventive and protective measures has to be provided. Based on new information concerning the hazards of engineered nanomaterials, we improved a previously developed risk assessment tool by following a simple scheme to gain in efficiency. In the first step, using a logical decision tree, one of the three hazard levels, from H1 to H3, is assigned to the nanomaterial. Using a combination of decision trees and matrices, the second step links the hazard with the emission and exposure potential to assign one of the three nanorisk levels (Nano 3 highest risk; Nano 1 lowest risk) to the activity. These operations are repeated at each process step, leading to the laboratory classification. The third step provides detailed preventive and protective measures for the determined level of nanorisk. We developed an adapted simple and intuitive method for nanomaterial risk management in research laboratories. It allows classifying the nanoactivities into three levels, additionally proposing concrete preventive and protective measures and associated actions. This method is a valuable tool for all the participants in nanomaterial safety. The users experience an essential learning opportunity and increase their safety awareness. Laboratory managers have a reliable tool to obtain an overview of the operations involving nanomaterials in their laboratories; this is essential, as they are responsible for the employee safety, but are sometimes unaware of the works performed. Bringing this risk to a three-band scale (like other types of risks such as biological, radiation

76 FR 35130 - Pipeline Safety: Control Room Management/Human Factors

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-16

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Parts...: Control Room Management/Human Factors AGENCY: Pipeline and Hazardous Materials Safety Administration... safety standards, risk assessments, and safety policies for natural gas pipelines and for hazardous...

Benchmarking Global Food Safety Performances: The Era of Risk Intelligence.

PubMed

Valleé, Jean-Charles Le; Charlebois, Sylvain

2015-10-01

Food safety data segmentation and limitations hamper the world's ability to select, build up, monitor, and evaluate food safety performance. Currently, there is no metric that captures the entire food safety system, and performance data are not collected strategically on a global scale. Therefore, food safety benchmarking is essential not only to help monitor ongoing performance but also to inform continued food safety system design, adoption, and implementation toward more efficient and effective food safety preparedness, responsiveness, and accountability. This comparative study identifies and evaluates common elements among global food safety systems. It provides an overall world ranking of food safety performance for 17 Organisation for Economic Co-Operation and Development (OECD) countries, illustrated by 10 indicators organized across three food safety risk governance domains: risk assessment (chemical risks, microbial risks, and national reporting on food consumption), risk management (national food safety capacities, food recalls, food traceability, and radionuclides standards), and risk communication (allergenic risks, labeling, and public trust). Results show all countries have very high food safety standards, but Canada and Ireland, followed by France, earned excellent grades relative to their peers. However, any subsequent global ranking study should consider the development of survey instruments to gather adequate and comparable national evidence on food safety.

When bad things happen: adverse event reporting and disclosure as patient safety and risk management tools in the neonatal intensive care unit.

PubMed

Donn, Steven M; McDonnell, William M

2012-01-01

The Institute of Medicine has recommended a change in culture from "name and blame" to patient safety. This will require system redesign to identify and address errors, establish performance standards, and set safety expectations. This approach, however, is at odds with the present medical malpractice (tort) system. The current system is outcomes-based, meaning that health care providers and institutions are often sued despite providing appropriate care. Nevertheless, the focus should remain to provide the safest patient care. Effective peer review may be hindered by the present tort system. Reporting of medical errors is a key piece of peer review and education, and both anonymous reporting and confidential reporting of errors have potential disadvantages. Diagnostic and treatment errors continue to be the leading sources of allegations of malpractice in pediatrics, and the neonatal intensive care unit is uniquely vulnerable. Most errors result from systems failures rather than human error. Risk management can be an effective process to identify, evaluate, and address problems that may injure patients, lead to malpractice claims, and result in financial losses. Risk management identifies risk or potential risk, calculates the probability of an adverse event arising from a risk, estimates the impact of the adverse event, and attempts to control the risk. Implementation of a successful risk management program requires a positive attitude, sufficient knowledge base, and a commitment to improvement. Transparency in the disclosure of medical errors and a strategy of prospective risk management in dealing with medical errors may result in a substantial reduction in medical malpractice lawsuits, lower litigation costs, and a more safety-conscious environment. Thieme Medical Publishers, Inc.

The Art World's Concept of Negative Space Applied to System Safety Management

NASA Technical Reports Server (NTRS)

Goodin, James Ronald (Ronnie)

2005-01-01

Tools from several different disciplines can improve system safety management. This paper relates the Art World with our system safety world, showing useful art schools of thought applied to system safety management, developing an art theory-system safety bridge. This bridge is then used to demonstrate relations with risk management, the legal system, personnel management and basic management (establishing priorities). One goal of this presentation/paper is simply to be a fun diversion from the many technical topics presented during the conference.

Safety management and public spaces: restoring balance.

PubMed

Ball, David J; Ball-King, Laurence

2013-05-01

Since 2000, the reputation of health and safety in the United Kingdom has been tarnished, so much so that it has become the subject of both a media circus and a government inquiry. This not only threatens the worthy goals of health and safety, but also impacts upon the associated tool of risk assessment itself such that "risk assessment" is increasingly seen by the public at large as a term inviting ridicule, even abuse. The main thrust of the government's examination of health and safety has been its concern that safety requirements were placing a disproportionate burden on business. However, there is another source of discontent, which is public chagrin over the impact of injury control measures upon life beyond the conventional workplace, in particular upon the public spaces that people frequent in their leisure time and on the activities they engage in there. This article provides a perspective on this second dimension of the crisis in confidence. It describes how many U.K. agencies with responsibilities for a wide portfolio of public amenities ranging from the provision of play spaces for the young to the management of publicly accessible countryside, the maintenance of urban and rural trees, the stewardship of sites of cultural heritage, and the pursuit of outdoor educational activities have responded to some conflicts posed to their services by the new safety culture. It concludes with a discussion of implications for the management of public space and for risk assessment itself. © 2012 Society for Risk Analysis.

Risk Management Implementation Tool

NASA Technical Reports Server (NTRS)

Wright, Shayla L.

2004-01-01

Continuous Risk Management (CM) is a software engineering practice with processes, methods, and tools for managing risk in a project. It provides a controlled environment for practical decision making, in order to assess continually what could go wrong, determine which risk are important to deal with, implement strategies to deal with those risk and assure the measure effectiveness of the implemented strategies. Continuous Risk Management provides many training workshops and courses to teach the staff how to implement risk management to their various experiments and projects. The steps of the CRM process are identification, analysis, planning, tracking, and control. These steps and the various methods and tools that go along with them, identification, and dealing with risk is clear-cut. The office that I worked in was the Risk Management Office (RMO). The RMO at NASA works hard to uphold NASA s mission of exploration and advancement of scientific knowledge and technology by defining and reducing program risk. The RMO is one of the divisions that fall under the Safety and Assurance Directorate (SAAD). I worked under Cynthia Calhoun, Flight Software Systems Engineer. My task was to develop a help screen for the Continuous Risk Management Implementation Tool (RMIT). The Risk Management Implementation Tool will be used by many NASA managers to identify, analyze, track, control, and communicate risks in their programs and projects. The RMIT will provide a means for NASA to continuously assess risks. The goals and purposes for this tool is to provide a simple means to manage risks, be used by program and project managers throughout NASA for managing risk, and to take an aggressive approach to advertise and advocate the use of RMIT at each NASA center.

[A systemic risk analysis of hospital management processes by medical employees--an effective basis for improving patient safety].

PubMed

Sobottka, Stephan B; Eberlein-Gonska, Maria; Schackert, Gabriele; Töpfer, Armin

2009-01-01

Due to the knowledge gap that exists between patients and health care staff the quality of medical treatment usually cannot be assessed securely by patients. For an optimization of safety in treatment-related processes of medical care, the medical staff needs to be actively involved in preventive and proactive quality management. Using voluntary, confidential and non-punitive systematic employee surveys, vulnerable topics and areas in patient care revealing preventable risks can be identified at an early stage. Preventive measures to continuously optimize treatment quality can be defined by creating a risk portfolio and a priority list of vulnerable topics. Whereas critical incident reporting systems are suitable for continuous risk assessment by detecting safety-relevant single events, employee surveys permit to conduct a systematic risk analysis of all treatment-related processes of patient care at any given point in time.

Safety management of a complex R&D ground operating system

NASA Technical Reports Server (NTRS)

Connors, J. F.; Maurer, R. A.

1975-01-01

A perspective on safety program management has been developed for a complex R&D operating system, such as the NASA-Lewis Research Center. Using a systems approach, hazardous operations are subjected to third-party reviews by designated area safety committees and are maintained under safety permit controls. To insure personnel alertness, emergency containment forces and employees are trained in dry-run emergency simulation exercises. The keys to real safety effectiveness are top management support and visibility of residual risks.

Safety leadership and systems thinking: application and evaluation of a Risk Management Framework in the mining industry.

PubMed

Donovan, Sarah-Louise; Salmon, Paul M; Lenné, Michael G; Horberry, Tim

2017-10-01

Safety leadership is an important factor in supporting safety in high-risk industries. This article contends that applying systems-thinking methods to examine safety leadership can support improved learning from incidents. A case study analysis was undertaken of a large-scale mining landslide incident in which no injuries or fatalities were incurred. A multi-method approach was adopted, in which the Critical Decision Method, Rasmussen's Risk Management Framework and Accimap method were applied to examine the safety leadership decisions and actions which enabled the safe outcome. The approach enabled Rasmussen's predictions regarding safety and performance to be examined in the safety leadership context, with findings demonstrating the distribution of safety leadership across leader and system levels, and the presence of vertical integration as key to supporting the successful safety outcome. In doing so, the findings also demonstrate the usefulness of applying systems-thinking methods to examine and learn from incidents in terms of what 'went right'. The implications, including future research directions, are discussed. Practitioner Summary: This paper presents a case study analysis, in which systems-thinking methods are applied to the examination of safety leadership decisions and actions during a large-scale mining landslide incident. The findings establish safety leadership as a systems phenomenon, and furthermore, demonstrate the usefulness of applying systems-thinking methods to learn from incidents in terms of what 'went right'. Implications, including future research directions, are discussed.

Safety risk assessment using analytic hierarchy process (AHP) during planning and budgeting of construction projects.

PubMed

Aminbakhsh, Saman; Gunduz, Murat; Sonmez, Rifat

2013-09-01

The inherent and unique risks on construction projects quite often present key challenges to contractors. Health and safety risks are among the most significant risks in construction projects since the construction industry is characterized by a relatively high injury and death rate compared to other industries. In construction project management, safety risk assessment is an important step toward identifying potential hazards and evaluating the risks associated with the hazards. Adequate prioritization of safety risks during risk assessment is crucial for planning, budgeting, and management of safety related risks. In this paper, a safety risk assessment framework is presented based on the theory of cost of safety (COS) model and the analytic hierarchy process (AHP). The main contribution of the proposed framework is that it presents a robust method for prioritization of safety risks in construction projects to create a rational budget and to set realistic goals without compromising safety. The framework provides a decision tool for the decision makers to determine the adequate accident/injury prevention investments while considering the funding limits. The proposed safety risk framework is illustrated using a real-life construction project and the advantages and limitations of the framework are discussed. Copyright © 2013 National Safety Council and Elsevier Ltd. All rights reserved.

Fire Safety. Managing School Facilities, Guide 6.

ERIC Educational Resources Information Center

Department for Education and Employment, London (England). Architects and Building Branch.

This booklet discusses how United Kingdom schools can manage fire safety and minimize the risk of fire. The guide examines what legislation school buildings must comply with and covers the major risks. It also describes training and evacuation procedures and provides guidance on fire precautions, alarm systems, fire fighting equipment, and escape…

New initiatives for pharmacovigilance in South Korea: introducing the Korea Institute of Drug Safety and Risk Management (KIDS).

PubMed

Shin, Ju-Young; Jung, Sun-Young; Ahn, So-Hyeon; Lee, Shin Haeng; Kim, Su-Jin; Seong, Jong-Mi; Chung, Soo-Youn; Park, Byung-Joo

2014-11-01

Pharmacovigilance plays a vital role in ensuring that patients receive appropriate medical products that are safe and effective. This paper aims to describe the history of pharmacovigilance in Korea and introduce the establishment and goal of the KIDS. In Korea, the adverse drug reactions (ADR) reporting system was launched in 1988 by the Korea Ministry of Food and Drug Safety (MFDS) and spontaneous ADR reports have been collected from health care professionals and the general public. Although the ADR reporting system has begun, the reporting rate was very low in the first 10 years, and safety actions were done passively in response to the US Food and Drug Administration (FDA) or European Medicines Agency (EMA)'s safety alert and communications. Therefore, the Korea Institute of Drug Safety and Risk Management (KIDS) was established in April 2012 as a new initiative for pharmacovigilance. The KIDS will continue to contribute to the improvement of Korean pharmacovigilance by collecting, managing, and analyzing consumer-centered drug safety information. Copyright © 2014 John Wiley & Sons, Ltd.

Clinical risk management in mental health: a qualitative study of main risks and related organizational management practices.

PubMed

Briner, Matthias; Manser, Tanja

2013-02-04

A scientific understanding of clinical risk management (CRM) in mental health care is essential for building safer health systems and for improving patient safety. While evidence on patient safety and CRM in physical health care has increased, there is limited research on these issues in mental health care. This qualitative study provides an overview of the most important clinical risks in mental health and related organizational management practices. We conducted in-depth expert interviews with professionals responsible for CRM in psychiatric hospitals. Interviews were transcribed and analyzed applying qualitative content analysis to thematically sort the identified risks. The main concerns for CRM in mental health are a) violence and self-destructive behavior (i.e. protecting patients and staff from other patients, and patients from themselves), b) treatment errors, especially in the process of therapy, and c) risks associated with mental illnesses (e.g. psychosis or depression). This study identified critical differences to CRM in hospitals for physical disorder and challenges specific to CRM in mental health. Firstly, many psychiatric patients do not believe that they are ill and are therefore in hospital against their will. Secondly, staff safety is a much more prominent theme for CRM in mental health care as it is directly related to the specifics of mental illnesses. The current study contributes to the understanding of patient safety and raises awareness for CRM in mental health. The mental health specific overview of central risks and related organizational management practices offers a valuable basis for CRM development in mental health and an addition to CRM in general.

Seniors' perceptions of vehicle safety risks and needs.

PubMed

Shaw, Lynn; Polgar, Jan Miller; Vrkljan, Brenda; Jacobson, Jill

2010-01-01

The investigation of vehicle safety needs for older drivers and passengers is integral for their safe transportation. A program of research on safe transportation for seniors was launched through AUTO21, a Canadian Network of Centres of Excellence. This national research network focuses on a wide range of automotive issues, from materials and design to safety and societal issues. An inductive qualitative inquiry of seniors' driving experiences, safety feature use, and strategies to prevent injury and manage risks was a first step in this program. We conducted interviews and focus groups with 58 seniors without disabilities and 9 seniors with disabilities. We identified a lack of congruity between the vehicle and safety feature design and seniors' needs. Seniors described strategies to manage their safety and that of others. Specific aspects of vehicle design, safety features, and action strategies that support safer use and operation of a vehicle by seniors are outlined.

Biomarkers: Dynamic "Tools" for Health and Safety Risk Assessment

EPA Science Inventory

Today informational flow from biomarkers contributes importantly to various types of health effects research, risk assessment and risk management decisions that impact, or have the potential to impact, public health and safety. Therefore, dependent upon the nature of the health r...

Dams, Hydrology and Risk in Future River Management

NASA Astrophysics Data System (ADS)

Wegner, D. L.

2017-12-01

Across America there are over 80,000 large to medium dams and globally the number is in excess of 800,000. Currently there are over 1,400 dams and diversion structures being planned or under construction globally. In addition to these documented dams there are thousands of small dams populating watersheds. Governments, agencies, native tribes, private owners and regulators all have a common interest in safe dams. Often dam safety is characterized as reducing structural risk while providing for maximum operational flexibility. In the 1970's there were a number of large and small dam failures in the United States. These failures prompted the federal government to issue voluntary dam safety guidelines. These guidelines were based on historic information incorporated into a risk assessment process to analyze, evaluate and manage risk with the goal to improve the quality of and support of dam management and safety decisions. We conclude that historic and new risks need to be integrated into dam management to insure adequate safety and operational flexibility. A recent assessment of the future role of dams in the United States premises that future costs such as maintenance or removal beyond the economic design life have not been factored into the long-term operations or relicensing of dams. The converging risks associated with aging water storage infrastructure, multiple dams within watersheds and uncertainty in demands policy revisions and an updated strategic approach to dam safety. Decisions regarding the future of dams in the United States may, in turn, influence regional water planning and management. Leaders in Congress and in the states need to implement a comprehensive national water assessment and a formal analysis of the role dams play in our water future. A research and national policy agenda is proposed to assess future impacts and the design, operation, and management of watersheds and dams.

International trade standards for commodities and products derived from animals: the need for a system that integrates food safety and animal disease risk management.

PubMed

Thomson, G R; Penrith, M-L; Atkinson, M W; Thalwitzer, S; Mancuso, A; Atkinson, S J; Osofsky, S A

2013-12-01

A case is made for greater emphasis to be placed on value chain management as an alternative to geographically based disease risk mitigation for trade in commodities and products derived from animals. The geographic approach is dependent upon achievement of freedom in countries or zones from infectious agents that cause so-called transboundary animal diseases, while value chain-based risk management depends upon mitigation of animal disease hazards potentially associated with specific commodities or products irrespective of the locality of production. This commodity-specific approach is founded on the same principles upon which international food safety standards are based, viz. hazard analysis critical control points (HACCP). Broader acceptance of a value chain approach enables animal disease risk management to be combined with food safety management by the integration of commodity-based trade and HACCP methodologies and thereby facilitates 'farm to fork' quality assurance. The latter is increasingly recognized as indispensable to food safety assurance and is therefore a pre-condition to safe trade. The biological principles upon which HACCP and commodity-based trade are based are essentially identical, potentially simplifying sanitary control in contrast to current separate international sanitary standards for food safety and animal disease risks that are difficult to reconcile. A value chain approach would not only enable more effective integration of food safety and animal disease risk management of foodstuffs derived from animals but would also ameliorate adverse environmental and associated socio-economic consequences of current sanitary standards based on the geographic distribution of animal infections. This is especially the case where vast veterinary cordon fencing systems are relied upon to separate livestock and wildlife as is the case in much of southern Africa. A value chain approach would thus be particularly beneficial to under-developed regions of

Risk-based requirements management framework with applications to assurance cases

NASA Astrophysics Data System (ADS)

Feng, D.; Eyster, C.

The current regulatory approach for assuring device safety primarily focuses on compliance with prescriptive safety regulations and relevant safety standards. This approach, however, does not always lead to a safe system design even though safety regulations and standards have been met. In the medical device industry, several high profile recalls involving infusion pumps have prompted the regulatory agency to reconsider how device safety should be managed, reviewed and approved. An assurance case has been cited as a promising tool to address this growing concern. Assurance cases have been used in safety-critical systems for some time. Most assurance cases, if not all, in literature today are developed in an ad hoc fashion, independent from risk management and requirement development. An assurance case is a resource-intensive endeavor that requires additional effort and documentation from equipment manufacturers. Without a well-organized requirements infrastructure in place, such “ additional effort” can be substantial, to the point where the cost of adoption outweighs the benefit of adoption. In this paper, the authors present a Risk-Based Requirements and Assurance Management (RBRAM) methodology. The RBRAM is an elaborate framework that combines Risk-Based Requirements Management (RBRM) with assurance case methods. Such an integrated framework can help manufacturers leverage an existing risk management to present a comprehensive assurance case with minimal additional effort while providing a supplementary means to reexamine the integrity of the system design in terms of the mission objective. Although the example used is from the medical industry, the authors believe that the RBRAM methodology underlines the fundamental principle of risk management, and offers a simple, yet effective framework applicable to aerospace industry, perhaps, to any industry.

Management of nanomaterials safety in research environment.

PubMed

Groso, Amela; Petri-Fink, Alke; Magrez, Arnaud; Riediker, Michael; Meyer, Thierry

2010-12-10

Despite numerous discussions, workshops, reviews and reports about responsible development of nanotechnology, information describing health and environmental risk of engineered nanoparticles or nanomaterials is severely lacking and thus insufficient for completing rigorous risk assessment on their use. However, since preliminary scientific evaluations indicate that there are reasonable suspicions that activities involving nanomaterials might have damaging effects on human health; the precautionary principle must be applied. Public and private institutions as well as industries have the duty to adopt preventive and protective measures proportionate to the risk intensity and the desired level of protection. In this work, we present a practical, 'user-friendly' procedure for a university-wide safety and health management of nanomaterials, developed as a multi-stakeholder effort (government, accident insurance, researchers and experts for occupational safety and health). The process starts using a schematic decision tree that allows classifying the nano laboratory into three hazard classes similar to a control banding approach (from Nano 3--highest hazard to Nano1--lowest hazard). Classifying laboratories into risk classes would require considering actual or potential exposure to the nanomaterial as well as statistical data on health effects of exposure. Due to the fact that these data (as well as exposure limits for each individual material) are not available, risk classes could not be determined. For each hazard level we then provide a list of required risk mitigation measures (technical, organizational and personal). The target 'users' of this safety and health methodology are researchers and safety officers. They can rapidly access the precautionary hazard class of their activities and the corresponding adequate safety and health measures. We succeed in convincing scientist dealing with nano-activities that adequate safety measures and management are promoting

Management of nanomaterials safety in research environment

PubMed Central

2010-01-01

Despite numerous discussions, workshops, reviews and reports about responsible development of nanotechnology, information describing health and environmental risk of engineered nanoparticles or nanomaterials is severely lacking and thus insufficient for completing rigorous risk assessment on their use. However, since preliminary scientific evaluations indicate that there are reasonable suspicions that activities involving nanomaterials might have damaging effects on human health; the precautionary principle must be applied. Public and private institutions as well as industries have the duty to adopt preventive and protective measures proportionate to the risk intensity and the desired level of protection. In this work, we present a practical, 'user-friendly' procedure for a university-wide safety and health management of nanomaterials, developed as a multi-stakeholder effort (government, accident insurance, researchers and experts for occupational safety and health). The process starts using a schematic decision tree that allows classifying the nano laboratory into three hazard classes similar to a control banding approach (from Nano 3 - highest hazard to Nano1 - lowest hazard). Classifying laboratories into risk classes would require considering actual or potential exposure to the nanomaterial as well as statistical data on health effects of exposure. Due to the fact that these data (as well as exposure limits for each individual material) are not available, risk classes could not be determined. For each hazard level we then provide a list of required risk mitigation measures (technical, organizational and personal). The target 'users' of this safety and health methodology are researchers and safety officers. They can rapidly access the precautionary hazard class of their activities and the corresponding adequate safety and health measures. We succeed in convincing scientist dealing with nano-activities that adequate safety measures and management are promoting

ePORT, NASA's Computer Database Program for System Safety Risk Management Oversight (Electronic Project Online Risk Tool)

NASA Technical Reports Server (NTRS)

Johnson, Paul W.

2008-01-01

ePORT (electronic Project Online Risk Tool) provides a systematic approach to using an electronic database program to manage a program/project risk management processes. This presentation will briefly cover the standard risk management procedures, then thoroughly cover NASA's Risk Management tool called ePORT. This electronic Project Online Risk Tool (ePORT) is a web-based risk management program that provides a common framework to capture and manage risks, independent of a programs/projects size and budget. It is used to thoroughly cover the risk management paradigm providing standardized evaluation criterion for common management reporting, ePORT improves Product Line, Center and Corporate Management insight, simplifies program/project manager reporting, and maintains an archive of data for historical reference.

Safety management of a complex R and D ground operating system

NASA Technical Reports Server (NTRS)

Connors, J. F.; Maurer, R. A.

1975-01-01

A perspective on safety program management was developed for a complex R&D operating system, such as the NASA-Lewis Research Center. Using a systems approach, hazardous operations are subjected to third-party reviews by designated-area safety committees and are maintained under safety permit controls. To insure personnel alertness, emergency containment forces and employees are trained in dry-run emergency simulation exercises. The keys to real safety effectiveness are top management support and visibility of residual risks.

The effect of rights-based fisheries management on risk taking and fishing safety.

PubMed

Pfeiffer, Lisa; Gratz, Trevor

2016-03-08

Commercial fishing is a dangerous occupation despite decades of regulatory initiatives aimed at making it safer. We posit that rights-based fisheries management (the individual allocation of fishing quota to vessels or fishing entities, also called catch shares) can improve safety by solving many of the problems associated with the competitive race to fish experienced in fisheries around the world. The competitive nature of such fisheries results in risky behavior such as fishing in poor weather, overloading vessels with fishing gear, and neglecting maintenance. Although not necessarily intended to address safety issues, catch shares eliminate many of the economic incentives to fish as rapidly as possible. We develop a dataset and methods to empirically evaluate the effects of the adoption of catch shares management on a particularly risky type of behavior: the propensity to fish in stormy weather. After catch shares was implemented in an economically important US West Coast fishery, a fisherman's probability of taking a fishing trip in high wind conditions decreased by 82% compared with only 31% in the former race to fish fishery. Overall, catch shares caused the average annual rate of fishing on high wind days to decrease by 79%. These results are evidence that institutional changes can significantly reduce individual, voluntary risk exposure and result in safer fisheries.

Safety management vs. picking leaves.

PubMed

Wright, D

1991-09-01

A safety program will generally have as its base a comprehensive written document made available for everyone in the organization. The document should indicate a positive commitment to safety by management. It should not be a "how to" guide, but rather a broad outline to establish responsibilities, goals, and methods. The safety manager is appointed in writing and answers to the highest level of management. As opposed to a "doer," the safety manager acts as a director and administrator of the safety program. This is accomplished through the advisory capacity of the safety program for solicited and unsolicited problems. The focus of the safety manager is on the system and how it contributes to safety problems, rather than individual problems. Management has the ultimate responsibility for safety. Their efforts should reflect a proactive attitude to correct problems in the system. In order to identify areas of interest, technically competent input from the safety manager should be required. The support of the safety program by top management determines the success of the program. Without a clear and firm commitment by the organization, safety will receive no more than lip service from the employees. The benefits of a proactive approach will be realized in the organization's ability to manage safety issues, rather than reacting to them.

Clinical risk management in mental health: a qualitative study of main risks and related organizational management practices

PubMed Central

2013-01-01

Background A scientific understanding of clinical risk management (CRM) in mental health care is essential for building safer health systems and for improving patient safety. While evidence on patient safety and CRM in physical health care has increased, there is limited research on these issues in mental health care. This qualitative study provides an overview of the most important clinical risks in mental health and related organizational management practices. Methods We conducted in-depth expert interviews with professionals responsible for CRM in psychiatric hospitals. Interviews were transcribed and analyzed applying qualitative content analysis to thematically sort the identified risks. Results The main concerns for CRM in mental health are a) violence and self-destructive behavior (i.e. protecting patients and staff from other patients, and patients from themselves), b) treatment errors, especially in the process of therapy, and c) risks associated with mental illnesses (e.g. psychosis or depression). This study identified critical differences to CRM in hospitals for physical disorder and challenges specific to CRM in mental health. Firstly, many psychiatric patients do not believe that they are ill and are therefore in hospital against their will. Secondly, staff safety is a much more prominent theme for CRM in mental health care as it is directly related to the specifics of mental illnesses. Conclusions The current study contributes to the understanding of patient safety and raises awareness for CRM in mental health. The mental health specific overview of central risks and related organizational management practices offers a valuable basis for CRM development in mental health and an addition to CRM in general. PMID:23379842

Development of Risk Assessment Matrix for NASA Engineering and Safety Center

NASA Technical Reports Server (NTRS)

Malone, Roy W., Jr.; Moses, Kelly

2004-01-01

This paper describes a study, which had as its principal goal the development of a sufficiently detailed 5 x 5 Risk Matrix Scorecard. The purpose of this scorecard is to outline the criteria by which technical issues can be qualitatively and initially prioritized. The tool using this score card has been proposed to be one of the information resources the NASA Engineering and Safety Center (NESC) takes into consideration when making decisions with respect to incoming information on safety concerns across the entire NASA agency. The contents of this paper discuss in detail each element of the risk matrix scorecard, definitions for those elements and the rationale behind the development of those definitions. This scorecard development was performed in parallel with the tailoring of the existing Futron Corporation Integrated Risk Management Application (IRMA) software tool. IRMA was tailored to fit NESC needs for evaluating incoming safety concerns and was renamed NESC Assessment Risk Management Application (NAFMA) which is still in developmental phase.

The use of GIS tools for road infrastructure safety management

NASA Astrophysics Data System (ADS)

Budzyński, Marcin; Kustra, Wojciech; Okraszewska, Romanika; Jamroz, Kazimierz; Pyrchla, Jerzy

2018-01-01

There are many factors that influence accidents and their severity. They can be grouped within the system of man, vehicle and environment. The article focuses on how GIS tools can be used to manage road infrastructure safety. To ensure a better understanding and identification of road factors, GIS tools help with the acquisition of road parameter data. Their other role is helping with a clear and effective presentation of risk ranking. GIS is key to identifying high-risk sections and supports the effective communication of safety levels. This makes it a vital element of safety management. The article describes the use of GIS for the collection and visualisation of road parameter data which are not available in any of the existing databases, i.e. horizontal curve parameters. As we know from research and statistics, they are important factors that determine the safety of road infrastructure. Finally, new research is proposed as well as the possibilities for applying GIS tools for the purposes of road safety inspection.

Using Risk Assessment Methodologies to Meet Management Objectives

NASA Technical Reports Server (NTRS)

DeMott, D. L.

2015-01-01

Current decision making involves numerous possible combinations of technology elements, safety and health issues, operational aspects and process considerations to satisfy program goals. Identifying potential risk considerations as part of the management decision making process provides additional tools to make more informed management decision. Adapting and using risk assessment methodologies can generate new perspectives on various risk and safety concerns that are not immediately apparent. Safety and operational risks can be identified and final decisions can balance these considerations with cost and schedule risks. Additional assessments can also show likelihood of event occurrence and event consequence to provide a more informed basis for decision making, as well as cost effective mitigation strategies. Methodologies available to perform Risk Assessments range from qualitative identification of risk potential, to detailed assessments where quantitative probabilities are calculated. Methodology used should be based on factors that include: 1) type of industry and industry standards, 2) tasks, tools, and environment 3) type and availability of data and 4) industry views and requirements regarding risk & reliability. Risk Assessments are a tool for decision makers to understand potential consequences and be in a position to reduce, mitigate or eliminate costly mistakes or catastrophic failures.

Understanding safety and production risks in rail engineering planning and protection.

PubMed

Wilson, John R; Ryan, Brendan; Schock, Alex; Ferreira, Pedro; Smith, Stuart; Pitsopoulos, Julia

2009-07-01

Much of the published human factors work on risk is to do with safety and within this is concerned with prediction and analysis of human error and with human reliability assessment. Less has been published on human factors contributions to understanding and managing project, business, engineering and other forms of risk and still less jointly assessing risk to do with broad issues of 'safety' and broad issues of 'production' or 'performance'. This paper contains a general commentary on human factors and assessment of risk of various kinds, in the context of the aims of ergonomics and concerns about being too risk averse. The paper then describes a specific project, in rail engineering, where the notion of a human factors case has been employed to analyse engineering functions and related human factors issues. A human factors issues register for potential system disturbances has been developed, prior to a human factors risk assessment, which jointly covers safety and production (engineering delivery) concerns. The paper concludes with a commentary on the potential relevance of a resilience engineering perspective to understanding rail engineering systems risk. Design, planning and management of complex systems will increasingly have to address the issue of making trade-offs between safety and production, and ergonomics should be central to this. The paper addresses the relevant issues and does so in an under-published domain - rail systems engineering work.

Essentials of Risk Management. Strategic Decisions. Board Basics.

ERIC Educational Resources Information Center

Sonenstein, Burton; Kumin, Laura A.

1998-01-01

This booklet, intended for trustees of institutions of higher education, offers some instruction on the principles of risk management. Introductory information provides a definition of risk management, which is seen as a planning and strategic function, not solely as a financial or safety assessment. Individual sections then address the following…

[Risk management project: reactive or proactive approach?].

PubMed

Vastola, Pasquale; Saracino, Donato M T

2006-01-01

Risk management in healthcare refers to the process of developing strategies aimed at preventing and controlling the risk of occurrence of errors and harmful events. The final objective is primarily that of increasing patient safety and secondarily, that of reducing the financial burden of adverse events. The implementation of a risk management system is therefore of vital strategic importance. Nevertheless, a fundamental question that needs to be answered in the operational phase is: should a proactive or reactive approach to risk management be taken? In our view, proactive risk management has many advantages over a reactive approach and is therefore preferable. The reactive approach should be taken exclusively to obtain information regarding risk and errors, in the preliminary, as well as monitoring and follow-up phases of the project.

The effect of rights-based fisheries management on risk taking and fishing safety

PubMed Central

Pfeiffer, Lisa; Gratz, Trevor

2016-01-01

Commercial fishing is a dangerous occupation despite decades of regulatory initiatives aimed at making it safer. We posit that rights-based fisheries management (the individual allocation of fishing quota to vessels or fishing entities, also called catch shares) can improve safety by solving many of the problems associated with the competitive race to fish experienced in fisheries around the world. The competitive nature of such fisheries results in risky behavior such as fishing in poor weather, overloading vessels with fishing gear, and neglecting maintenance. Although not necessarily intended to address safety issues, catch shares eliminate many of the economic incentives to fish as rapidly as possible. We develop a dataset and methods to empirically evaluate the effects of the adoption of catch shares management on a particularly risky type of behavior: the propensity to fish in stormy weather. After catch shares was implemented in an economically important US West Coast fishery, a fisherman’s probability of taking a fishing trip in high wind conditions decreased by 82% compared with only 31% in the former race to fish fishery. Overall, catch shares caused the average annual rate of fishing on high wind days to decrease by 79%. These results are evidence that institutional changes can significantly reduce individual, voluntary risk exposure and result in safer fisheries. PMID:26884188

The spread model of food safety risk under the supply-demand disturbance.

PubMed

Wang, Jining; Chen, Tingqiang

2016-01-01

In this paper, based on the imbalance of the supply-demand relationship of food, we design a spreading model of food safety risk, which is about from food producers to consumers in the food supply chain. We use theoretical analysis and numerical simulation to describe the supply-demand relationship and government supervision behaviors' influence on the risk spread of food safety and the behaviors of the food producers and the food retailers. We also analyze the influence of the awareness of consumer rights protection and the level of legal protection of consumer rights on the risk spread of food safety. This model contributes to the explicit investigation of the influence relationship among supply-demand factors, the regulation behavioral choice of government, the behavioral choice of food supply chain members and food safety risk spread. And this paper provides a new viewpoint for considering food safety risk spread in the food supply chain, which has a great reference for food safety management.

Developing tools for the safety specification in risk management plans: lessons learned from a pilot project.

PubMed

Cooper, Andrew J P; Lettis, Sally; Chapman, Charlotte L; Evans, Stephen J W; Waller, Patrick C; Shakir, Saad; Payvandi, Nassrin; Murray, Alison B

2008-05-01

Following the adoption of the ICH E2E guideline, risk management plans (RMP) defining the cumulative safety experience and identifying limitations in safety information are now required for marketing authorisation applications (MAA). A collaborative research project was conducted to gain experience with tools for presenting and evaluating data in the safety specification. This paper presents those tools found to be useful and the lessons learned from their use. Archive data from a successful MAA were utilised. Methods were assessed for demonstrating the extent of clinical safety experience, evaluating the sensitivity of the clinical trial data to detect treatment differences and identifying safety signals from adverse event and laboratory data to define the extent of safety knowledge with the drug. The extent of clinical safety experience was demonstrated by plots of patient exposure over time. Adverse event data were presented using dot plots, which display the percentages of patients with the events of interest, the odds ratio, and 95% confidence interval. Power and confidence interval plots were utilised for evaluating the sensitivity of the clinical database to detect treatment differences. Box and whisker plots were used to display laboratory data. This project enabled us to identify new evidence-based methods for presenting and evaluating clinical safety data. These methods represent an advance in the way safety data from clinical trials can be analysed and presented. This project emphasises the importance of early and comprehensive planning of the safety package, including evaluation of the use of epidemiology data.

76 FR 37131 - Joint Meeting of the Gastrointestinal Drugs Advisory Committee and the Drug Safety and Risk...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-24

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2011-N-0002] Joint Meeting of the Gastrointestinal Drugs Advisory Committee and the Drug Safety and Risk Management...: Gastrointestinal Drugs Advisory Committee and the Drug Safety and Risk Management Advisory Committee. General...

Implementation of safety management systems in Hong Kong construction industry - A safety practitioner's perspective.

PubMed

Yiu, Nicole S N; Sze, N N; Chan, Daniel W M

2018-02-01

In the 1980s, the safety management system (SMS) was introduced in the construction industry to mitigate against workplaces hazards, reduce the risk of injuries, and minimize property damage. Also, the Factories and Industrial Undertakings (Safety Management) Regulation was introduced on 24 November 1999 in Hong Kong to empower the mandatory implementation of a SMS in certain industries including building construction. Therefore, it is essential to evaluate the effectiveness of the SMS in improving construction safety and identify the factors that influence its implementation in Hong Kong. A review of the current state-of-the-practice helped to establish the critical success factors (CSFs), benefits, and difficulties of implementing the SMS in the construction industry, while structured interviews were used to establish the key factors of the SMS implementation. Results of the state-of-the-practice review and structured interviews indicated that visible senior commitment, in terms of manpower and cost allocation, and competency of safety manager as key drivers for the SMS implementation. More so, reduced accident rates and accident costs, improved organization framework, and increased safety audit ratings were identified as core benefits of implementing the SMS. Meanwhile, factors such as insufficient resources, tight working schedule, and high labor turnover rate were the key challenges to the effective SMS implementation in Hong Kong. The findings of the study were consistent and indicative of the future development of safety management practice and the sustainable safety improvement of Hong Kong construction industry in the long run. Copyright © 2018 National Safety Council and Elsevier Ltd. All rights reserved.

78 FR 64957 - Joint Meeting of the Gastrointestinal Drugs Advisory Committee and the Drug Safety and Risk...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-30

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2013-N-0001] Joint Meeting of the Gastrointestinal Drugs Advisory Committee and the Drug Safety and Risk Management... Committee and the Drug Safety and Risk Management Advisory Committee. General Function of the Committees: To...

Software Safety Risk in Legacy Safety-Critical Computer Systems

NASA Technical Reports Server (NTRS)

Hill, Janice; Baggs, Rhoda

2007-01-01

Safety-critical computer systems must be engineered to meet system and software safety requirements. For legacy safety-critical computer systems, software safety requirements may not have been formally specified during development. When process-oriented software safety requirements are levied on a legacy system after the fact, where software development artifacts don't exist or are incomplete, the question becomes 'how can this be done?' The risks associated with only meeting certain software safety requirements in a legacy safety-critical computer system must be addressed should such systems be selected as candidates for reuse. This paper proposes a method for ascertaining formally, a software safety risk assessment, that provides measurements for software safety for legacy systems which may or may not have a suite of software engineering documentation that is now normally required. It relies upon the NASA Software Safety Standard, risk assessment methods based upon the Taxonomy-Based Questionnaire, and the application of reverse engineering CASE tools to produce original design documents for legacy systems.

Theories of risk and safety: what is their relevance to nursing?

PubMed

Cooke, Hannah

2009-03-01

The aim of this paper is to review key theories of risk and safety and their implications for nursing. The concept of of patient safety has only recently risen to prominence as an organising principle in healthcare. The paper considers the wider social context in which contemporary concepts of risk and safety have developed. In particular it looks at sociological debates about the rise of risk culture and the risk society and their influence on the patient safety movement. The paper discusses three bodies of theory which have attempted to explain the management of risk and safety in organisations: normal accident theory, high reliability theory, and grid-group cultural theory. It examine debates between these theories and their implications for healthcare. It discusses reasons for the dominance of high reliability theory in healthcare and its strengths and limitations. The paper suggest that high reliability theory has particular difficulties in explaining some aspects of organisational culture. It also suggest that the implementation of high reliability theory in healthcare has involved over reliance on numerical indicators. It suggests that patient safety could be improved by openness to a wider range of theoretical perspectives.

[Design, implementation and evaluation of a management model of patient safety in hospitals in Catalonia, Spain].

PubMed

Saura, Rosa Maria; Moreno, Pilar; Vallejo, Paula; Oliva, Glòria; Alava, Fernando; Esquerra, Miquel; Davins, Josep; Vallès, Roser; Bañeres, Joaquim

2014-07-01

Since its inception in 2006, the Alliance for Patient Safety in Catalonia has played a major role in promoting and shaping a series of projects related to the strategy of the Ministry of Health, Social Services and Equality, for improving patient safety. One such project was the creation of functional units or committees of safety in hospitals in order to facilitate the management of patient safety. The strategy has been implemented in hospitals in Catalonia which were selected based on criteria of representativeness. The intervention was based on two lines of action, one to develop the model framework and the other for its development. Firstly the strategy for safety management based on EFQM (European Foundation for Quality Management) was defined with the development of standards, targets and indicators to implement security while the second part involved the introduction of tools, methodologies and knowledge to the management support of patient safety and risk prevention. The project was developed in four hospital areas considered higher risk, each assuming six goals for safety management. Some of these targets such as the security control panel or system of adverse event reporting were shared. 23 hospitals joined the project in Catalonia. Despite the different situations in each centre, high compliance was achieved in the development of the objectives. In each of the participating areas the security control panel was developed. Stable structures for safety management were established or strengthened. Training in patient safety played and important role, 1415 professionals participated. Through these kind of projects not only have been introduced programs of proven effectiveness in reducing risks, but they also provide to the facilities a work system that allows autonomy in diagnosis and analysis of the different risk situations or centre specific safety issues. Copyright © 2014. Published by Elsevier Espana.

Health and Safety Management for Small-scale Methane Fermentation Facilities

NASA Astrophysics Data System (ADS)

Yamaoka, Masaru; Yuyama, Yoshito; Nakamura, Masato; Oritate, Fumiko

In this study, we considered health and safety management for small-scale methane fermentation facilities that treat 2-5 ton of biomass daily based on several years operation experience with an approximate capacity of 5 t·d-1. We also took account of existing knowledge, related laws and regulations. There are no qualifications or licenses required for management and operation of small-scale methane fermentation facilities, even though rural sewerage facilities with a relative similar function are required to obtain a legitimate license. Therefore, there are wide variations in health and safety consciousness of the operators of small-scale methane fermentation facilities. The industrial safety and health laws are not applied to the operation of small-scale methane fermentation facilities. However, in order to safely operate a small-scale methane fermentation facility, the occupational safety and health management system that the law recommends should be applied. The aims of this paper are to clarify the risk factors in small-scale methane fermentation facilities and encourage planning, design and operation of facilities based on health and safety management.

Integrating Safety Assessment Methods using the Risk Informed Safety Margins Characterization (RISMC) Approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Curtis Smith; Diego Mandelli

Safety is central to the design, licensing, operation, and economics of nuclear power plants (NPPs). As the current light water reactor (LWR) NPPs age beyond 60 years, there are possibilities for increased frequency of systems, structures, and components (SSC) degradations or failures that initiate safety significant events, reduce existing accident mitigation capabilities, or create new failure modes. Plant designers commonly “over-design” portions of NPPs and provide robustness in the form of redundant and diverse engineered safety features to ensure that, even in the case of well-beyond design basis scenarios, public health and safety will be protected with a very highmore » degree of assurance. This form of defense-in-depth is a reasoned response to uncertainties and is often referred to generically as “safety margin.” Historically, specific safety margin provisions have been formulated primarily based on engineering judgment backed by a set of conservative engineering calculations. The ability to better characterize and quantify safety margin is important to improved decision making about LWR design, operation, and plant life extension. A systematic approach to characterization of safety margins and the subsequent margin management options represents a vital input to the licensee and regulatory analysis and decision making that will be involved. In addition, as research and development (R&D) in the LWR Sustainability (LWRS) Program and other collaborative efforts yield new data, sensors, and improved scientific understanding of physical processes that govern the aging and degradation of plant SSCs needs and opportunities to better optimize plant safety and performance will become known. To support decision making related to economics, readability, and safety, the RISMC Pathway provides methods and tools that enable mitigation options known as margins management strategies. The purpose of the RISMC Pathway R&D is to support plant decisions for risk

Evolution from safety management system (SMS) to HSE MS: Incorporating health aspects into the HSE management system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jong, G. de

1996-12-31

There is increasing recognition within the E&P industry that protection and promotion of the health of people at work is more than taking care of individual health. It is an organizational issue which can be managed using the same principles as for safety and environment. The synergy`s with safety and environmental management provide the link with the management system. However line managers need to under the critical Health issues: what are they are they relevant? How do we manage them? what are the standards? What are the management tools to be used? How do we monitor performance? What is themore » role of the line? What is the role of the health advisers? What training and competencies are needed for health management? What are the benefits? These questions have to be clarified before acceptance can be achieved for full integration of Health aspects into the HSE Management System. Health Risk Assessment was developed as a tool for systematic identification and assessment of health hazards and risks. It specifies the need for and type of controls and recovery measures, which can subsequently be incorporated in HSE Management System and HSE Cases. Our experience to date indicates that Health can successfully be integrated in HSE Management Systems and HSE Cases by using the same principles as developed for Safety Management Systems and Safety Cases. There are still many problems which need to be addressed but the methodology used appears to be sound and will eventually enhance line management understanding of the health management aspects relevant to the E&P Industry.« less

E&P forum land transport safety management guidelines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barber, S.; Carouso, M.; Covil, M.

1996-11-01

Against a general background of falling lost time injuries the member of serious incidents and fatalities in the upstream E&P industry involving motor vehicles employed in land transport remains stubbornly high. In consequence the E&P Forum has prepared guidelines to provide the E&P industry with clear guidance and a shared aim in minimizing vehicle incidents and their costs. Logistics and land transport are multifunctional activities involving personnel throughout the E&P industry. All those involved in land transport share a joint commitment to amazing land transport risks in their operation and to preventing incidents and fatalities as stated in their HSEmore » policies. Historically management`s focus has been on those activities which have a higher perceived risk. This attention has resulted in significant reductions in the number of accidents in these areas. The management of land transport safety requires the same approach and the same proactive emphasis as the management of other HSE risks within the business activity. Companies should have in place a management system for land transport operations based on a full and careful appraisal of the risks, followed by a clear management strategy to minimis and control those risks to a level as low as reasonably practicable.« less

Road safety issues for bus transport management.

PubMed

Cafiso, Salvatore; Di Graziano, Alessandro; Pappalardo, Giuseppina

2013-11-01

Because of the low percentage of crashes involving buses and the assumption that public transport improves road safety by reducing vehicular traffic, public interest in bus safety is not as great as that in the safety of other types of vehicles. It is possible that less attention is paid to the significance of crashes involving buses because the safety level of bus systems is considered to be adequate. The purpose of this study was to evaluate the knowledge and perceptions of bus managers with respect to safety issues and the potential effectiveness of various technologies in achieving higher safety standards. Bus managers were asked to give their opinions on safety issues related to drivers (training, skills, performance evaluation and behaviour), vehicles (maintenance and advanced devices) and roads (road and traffic safety issues) in response to a research survey. Kendall's algorithm was used to evaluate the level of concordance. The results showed that the majority of the proposed items were considered to have great potential for improving bus safety. The data indicated that in the experience of the participants, passenger unloading and pedestrians crossing near bus stops are the most dangerous actions with respect to vulnerable users. The final results of the investigation showed that start inhibition, automatic door opening, and the materials and internal architecture of buses were considered the items most strongly related to bus passenger safety. Brake assistance and vehicle monitoring systems were also considered to be very effective. With the exception of driver assistance systems for passenger and pedestrian safety, the perceptions of the importance of other driver assistance systems for vehicle monitoring and bus safety were not unanimous among the bus company managers who participated in this survey. The study results showed that the introduction of new technologies is perceived as an important factor in improving bus safety, but a better understanding

Real-Time Safety Risk Assessment Based on a Real-Time Location System for Hydropower Construction Sites

PubMed Central

Fan, Qixiang; Qiang, Maoshan

2014-01-01

The concern for workers' safety in construction industry is reflected in many studies focusing on static safety risk identification and assessment. However, studies on real-time safety risk assessment aimed at reducing uncertainty and supporting quick response are rare. A method for real-time safety risk assessment (RTSRA) to implement a dynamic evaluation of worker safety states on construction site has been proposed in this paper. The method provides construction managers who are in charge of safety with more abundant information to reduce the uncertainty of the site. A quantitative calculation formula, integrating the influence of static and dynamic hazards and that of safety supervisors, is established to link the safety risk of workers with the locations of on-site assets. By employing the hidden Markov model (HMM), the RTSRA provides a mechanism for processing location data provided by the real-time location system (RTLS) and analyzing the probability distributions of different states in terms of false positives and negatives. Simulation analysis demonstrated the logic of the proposed method and how it works. Application case shows that the proposed RTSRA is both feasible and effective in managing construction project safety concerns. PMID:25114958

Real-time safety risk assessment based on a real-time location system for hydropower construction sites.

PubMed

Jiang, Hanchen; Lin, Peng; Fan, Qixiang; Qiang, Maoshan

2014-01-01

The concern for workers' safety in construction industry is reflected in many studies focusing on static safety risk identification and assessment. However, studies on real-time safety risk assessment aimed at reducing uncertainty and supporting quick response are rare. A method for real-time safety risk assessment (RTSRA) to implement a dynamic evaluation of worker safety states on construction site has been proposed in this paper. The method provides construction managers who are in charge of safety with more abundant information to reduce the uncertainty of the site. A quantitative calculation formula, integrating the influence of static and dynamic hazards and that of safety supervisors, is established to link the safety risk of workers with the locations of on-site assets. By employing the hidden Markov model (HMM), the RTSRA provides a mechanism for processing location data provided by the real-time location system (RTLS) and analyzing the probability distributions of different states in terms of false positives and negatives. Simulation analysis demonstrated the logic of the proposed method and how it works. Application case shows that the proposed RTSRA is both feasible and effective in managing construction project safety concerns.

Linking better shiftwork arrangements with safety and health management systems.

PubMed

Kogi, Kazutaka

2004-12-01

Various support measures useful for promoting joint change approaches to the improvement of both shiftworking arrangements and safety and health management systems were reviewed. A particular focus was placed on enterprise-level risk reduction measures linking working hours and management systems. Voluntary industry-based guidelines on night and shift work for department stores and the chemical, automobile and electrical equipment industries were examined. Survey results that had led to the compilation of practicable measures to be included in these guidelines were also examined. The common support measures were then compared with ergonomic checkpoints for plant maintenance work involving irregular nightshifts. On the basis of this analysis, a new night and shift work checklist was designed. Both the guidelines and the plant maintenance work checkpoints were found to commonly cover multiple issues including work schedules and various job-related risks. This close link between shiftwork arrangements and risk management was important as shiftworkers in these industries considered teamwork and welfare services to be essential for managing risks associated with night and shift work. Four areas found suitable for participatory improvement by managers and workers were work schedules, ergonomic work tasks, work environment and training. The checklist designed to facilitate participatory change processes covered all these areas. The checklist developed to describe feasible workplace actions was suitable for integration with comprehensive safety and health management systems and offered valuable opportunities for improving working time arrangements and job content together.

Development of an effective risk management system in a teaching hospital.

PubMed

Adibi, Hossein; Khalesi, Nader; Ravaghi, Hamid; Jafari, Mahdi; Jeddian, Ali Reza

2012-09-21

Unsafe health care provision is a main cause of increased mortality rate amongst hospitalized patients all over the world. A system approach to medical error and its reduction is crucial that is defined by clinical and administrative activities undertaken to identify, evaluate, and reduce the risk of injury. The aim of this study was to develop and implement a risk management system in a large teaching hospital in Iran, especially of the basis of WHO guidelines and patient safety context. WHO draft guideline and patient safety reports from different countries were reviewed for defining acceptable framework of risk management system. Also current situation of mentioned hospital in safety matter and dimensions of patient safety culture was evaluated using HSOPSC questionnaire of AHRQ. With adjustment of guidelines and hospital status, the conceptual framework was developed and next it was validated in expert panel. The members of expert panel were selected according to their role and functions and also their experiences in risk management and patient safety issues. The validated framework consisted of designating a leader and coordinator core, defining communications, and preparing the infrastructure for patient safety education and culture-building. That was developed on the basis of some values and commitments and included reactive and proactive approaches. The findings of reporting activities demonstrated that at least 3.6 percent of hospitalized patients have experienced adverse events and 5.3 percent of all deaths in the hospital related with patient safety problems. Beside the average score of 12 dimensions of patient safety culture was 46.2 percent that was considerably low. The "non-punitive responses to error" had lowest positive score with 21.2 percent. It is of paramount importance for all health organizations to lay necessary foundations in order to identify safety risks and improve the quality of care. Inadequate participation of staff in education

A Humanistic Approach to Emotional Risk Management.

ERIC Educational Resources Information Center

Rubendall, Robert L.

Adventure programs attempt to control or limit injuries in high-risk programming. This risk management has concentrated on the physical safety of participants at the expense of emotional and developmental security. In the zeal for accident-free statistics, a highly controlled, directive approach is created that treats individuals according to a…

Management system of health and safety work (SMK3) with job safety analysis (JSA) in PT. Nira Murni construction

NASA Astrophysics Data System (ADS)

Melliana, Armen, Yusrizal, Akmal, Syarifah

2017-11-01

PT Nira Murni construction is a contractor of PT Chevron Pacific Indonesia which engaged in contractor, fabrication, maintenance construction suppliers, and labor services. The high of accident rate in this company is caused the lack of awareness of workplace safety. Therefore, it requires an effort to reduce the accident rate on the company so that the financial losses can be minimized. In this study, Safe T-Score method is used to analyze the accident rate by measuring the level of frequency. Analysis is continued using risk management methods which identify hazards, risk measurement and risk management. The last analysis uses Job safety analysis (JSA) which will identify the effect of accidents. From the result of this study can be concluded that Job Safety Analysis (JSA) methods has not been implemented properly. Therefore, JSA method needs to follow-up in the next study, so that can be well applied as prevention of occupational accidents.

The new risk paradigm for chemical process security and safety.

PubMed

Moore, David A

2004-11-11

The world of safety and security in the chemical process industries has certainly changed since 11 September, but the biggest challenges may be yet to come. This paper will explain that there is a new risk management paradigm for chemical security, discuss the differences in interpreting this risk versus accidental risk, and identify the challenges we can anticipate will occur in the future on this issue. Companies need to be ready to manage the new chemical security responsibilities and to exceed the expectations of the public and regulators. This paper will outline the challenge and a suggested course of action.

Risk management for the Space Exploration Initiative

NASA Technical Reports Server (NTRS)

Buchbinder, Ben

1993-01-01

Probabilistic Risk Assessment (PRA) is a quantitative engineering process that provides the analytic structure and decision-making framework for total programmatic risk management. Ideally, it is initiated in the conceptual design phase and used throughout the program life cycle. Although PRA was developed for assessment of safety, reliability, and availability risk, it has far greater application. Throughout the design phase, PRA can guide trade-off studies among system performance, safety, reliability, cost, and schedule. These studies are based on the assessment of the risk of meeting each parameter goal, with full consideration of the uncertainties. Quantitative trade-off studies are essential, but without full identification, propagation, and display of uncertainties, poor decisions may result. PRA also can focus attention on risk drivers in situations where risk is too high. For example, if safety risk is unacceptable, the PRA prioritizes the risk contributors to guide the use of resources for risk mitigation. PRA is used in the Space Exploration Initiative (SEI) Program. To meet the stringent requirements of the SEI mission, within strict budgetary constraints, the PRA structure supports informed and traceable decision-making. This paper briefly describes the SEI PRA process.

Why the Eurocontrol Safety Regulation Commission Policy on Safety Nets and Risk Assessment is Wrong

NASA Astrophysics Data System (ADS)

Brooker, Peter

2004-05-01

Current Eurocontrol Safety Regulation Commission (SRC) policy says that the Air Traffic Management (ATM) system (including safety minima) must be demonstrated through risk assessments to meet the Target Level of Safety (TLS) without needing to take safety nets (such as Short Term Conflict Alert) into account. This policy is wrong. The policy is invalid because it does not build rationally and consistently from ATM's firm foundations of TLS and hazard analysis. The policy is bad because it would tend to retard safety improvements. Safety net policy must rest on a clear and rational treatment of integrated ATM system safety defences. A new safety net policy, appropriate to safe ATM system improvements, is needed, which recognizes that safety nets are an integrated part of ATM system defences. The effects of safety nets in reducing deaths from mid-air collisions should be fully included in hazard analysis and safety audits in the context of the TLS for total system design.

Integrated risk reduction framework to improve railway hazardous materials transportation safety.

PubMed

Liu, Xiang; Saat, M Rapik; Barkan, Christopher P L

2013-09-15

Rail transportation plays a critical role to safely and efficiently transport hazardous materials. A number of strategies have been implemented or are being developed to reduce the risk of hazardous materials release from train accidents. Each of these risk reduction strategies has its safety benefit and corresponding implementation cost. However, the cost effectiveness of the integration of different risk reduction strategies is not well understood. Meanwhile, there has been growing interest in the U.S. rail industry and government to best allocate resources for improving hazardous materials transportation safety. This paper presents an optimization model that considers the combination of two types of risk reduction strategies, broken rail prevention and tank car safety design enhancement. A Pareto-optimality technique is used to maximize risk reduction at a given level of investment. The framework presented in this paper can be adapted to address a broader set of risk reduction strategies and is intended to assist decision makers for local, regional and system-wide risk management of rail hazardous materials transportation. Copyright © 2013 Elsevier B.V. All rights reserved.

Achieving Safety through Security Management

NASA Astrophysics Data System (ADS)

Ridgway, John

Whilst the achievement of safety objectives may not be possible purely through the administration of an effective Information Security Management System (ISMS), your job as safety manager will be significantly eased if such a system is in place. This paper seeks to illustrate the point by drawing a comparison between two of the prominent standards within the two disciplines of security and safety management.

Improved safety culture and labor-management relations attributed to changing at-risk behavior process at Union Pacific.

DOT National Transportation Integrated Search

2009-09-01

Changing At-Risk Behavior (CAB) is a safety process that is being conducted at Union Pacifics San Antonio Service Unit (SASU) with the aim of improving road and yard safety. CAB is an example of a proactive safety risk-reduction method called Clea...

From the traditional concept of safety management to safety integrated with quality.

PubMed

García Herrero, Susana; Mariscal Saldaña, Miguel Angel; Manzanedo del Campo, Miguel Angel; Ritzel, Dale O

2002-01-01

This editorial reviews the evolution of the concepts of safety and quality that have been used in the traditional workplace. The traditional programs of safety are explored showing strengths and weaknesses. The concept of quality management is also viewed. Safety management and quality management principles, stages, and measurement are highlighted. The concepts of quality and safety guarantee are assessed. Total Quality Management concepts are reviewed and applied to safety quality. Total safety management principles are discussed. Finally, an analysis of the relationship between quality and safety from data collected from a company in Spain is presented.

ADA access to passenger vessels : finding safety equivalence solutions for weathertight doors with coamings : Phase 2 : a risk management approach to reconfiguration design solutions

DOT National Transportation Integrated Search

2005-03-01

This report examines a risk management methodology to provide for both marine safety and disability access at weathertight doors into passenger accommodation spaces on U.S. passenger vessels. The Architectural and Transportation Barriers Compliance B...

Draugen HSE-case - occupational health risk management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Glas, J.J.P.; Kjaer, E.

1996-12-31

The Draugen HSE-Case serves as a risk management tool. Originally, risk management included only major safety hazards to personnel, environment and assets. Work Environment risks such as ergonomics, psycho-social factors and exposure to chemicals and noise, was not given the same attention. The Draugen HSE-Case addresses this weakness and extends all work environment risks. In order to promote line responsibility and commitment, relevant personnel is involved in the Case development. {open_quotes}THESIS{degrees}, a software application, is used to systematize input and to generate reports. The Draugen HSE-case encompasses: HSE risk analyses related to specific activities; Control of risk related to workmore » environment; Established tolerability criteria; Risk reducing measures; Emergency contingency measures; and Requirements for Competence and Follow-up. The development of Draugen HSE-Case is a continuous process. It will serve to minimize the potential of occupational illnesses, raise general awareness, and make occupational health management more cost-effective.« less

[Road map for health and safety management systems in healthcare facilities, according to the OHSAS 18001:2007 standard].

PubMed

Pugliese, F; Albini, E; Serio, O; Apostoli, P

2011-01-01

The 81/2008 Act has defined a model of a health and safety management system that can contribute to prevent the occupational health and safety risks. We have developed the structure of a health and safety management system model and the necessary tools for its implementation in health care facilities. The realization of a model is structured in various phases: initial review, safety policy, planning, implementation, monitoring, management review and continuous improvement. Such a model, in continuous evolution, is based on the responsibilities of the different corporate characters and on an accurate analysis of risks and involved norms.

Microbiological performance of a food safety management system in a food service operation.

PubMed

Lahou, E; Jacxsens, L; Daelman, J; Van Landeghem, F; Uyttendaele, M

2012-04-01

The microbiological performance of a food safety management system in a food service operation was measured using a microbiological assessment scheme as a vertical sampling plan throughout the production process, from raw materials to final product. The assessment scheme can give insight into the microbiological contamination and the variability of a production process and pinpoint bottlenecks in the food safety management system. Three production processes were evaluated: a high-risk sandwich production process (involving raw meat preparation), a medium-risk hot meal production process (starting from undercooked raw materials), and a low-risk hot meal production process (reheating in a bag). Microbial quality parameters, hygiene indicators, and relevant pathogens (Listeria monocytogenes, Salmonella, Bacillus cereus, and Escherichia coli O157) were in accordance with legal criteria and/or microbiological guidelines, suggesting that the food safety management system was effective. High levels of total aerobic bacteria (>3.9 log CFU/50 cm(2)) were noted occasionally on gloves of food handlers and on food contact surfaces, especially in high contamination areas (e.g., during handling of raw material, preparation room). Core control activities such as hand hygiene of personnel and cleaning and disinfection (especially in highly contaminated areas) were considered points of attention. The present sampling plan was used to produce an overall microbiological profile (snapshot) to validate the food safety management system in place.

Why consumers behave as they do with respect to food safety and risk information.

PubMed

Verbeke, Wim; Frewer, Lynn J; Scholderer, Joachim; De Brabander, Hubert F

2007-03-14

In recent years, it seems that consumers are generally uncertain about the safety and quality of their food and their risk perception differs substantially from that of experts. Hormone and veterinary drug residues in meat persist to occupy a high position in European consumers' food concern rankings. The aim of this contribution is to provide a better understanding to food risk analysts of why consumers behave as they do with respect to food safety and risk information. This paper presents some cases of seemingly irrational and inconsistent consumer behaviour with respect to food safety and risk information and provides explanations for these behaviours based on the nature of the risk and individual psychological processes. Potential solutions for rebuilding consumer confidence in food safety and bridging between lay and expert opinions towards food risks are reviewed. These include traceability and labelling, segmented communication approaches and public involvement in risk management decision-making.

Safety management by walking around (SMBWA): a safety intervention program based on both peer and manager participation.

PubMed

Luria, Gil; Morag, Ido

2012-03-01

"Management by walking around" (MBWA) is a practice that has aroused much interest in management science and practice. The purpose of this study is to demonstrate adaptation of this practice to safety management. We describe a three-year long case study that collected empirical data in which a modified MBWA was practiced in order to improve safety in a semiconductor fabrication facility. The main modification involved integrating an information system with the MBWA in order to create a practice that would generate safety leadership development and an organizational safety learning mechanism, while promoting employee safety participation. The results of the case study demonstrate that the SMBWA practice facilitated thousands of tours in which safety leadership behaviors were practiced by managers and by employees (employees performed five times as many tours as managers). The information system collected information about safety behaviors and safety conditions that could not otherwise be obtained. Thus, this study presents a new organizational safety practice SMBWA, and demonstrates the ways in which SMBWA may improve safety in organizations. Copyright © 2011 Elsevier Ltd. All rights reserved.

Risk management for drinking water safety in low and middle income countries - cultural influences on water safety plan (WSP) implementation in urban water utilities.

PubMed

Omar, Yahya Y; Parker, Alison; Smith, Jennifer A; Pollard, Simon J T

2017-01-15

We investigated cultural influences on the implementation of water safety plans (WSPs) using case studies from WSP pilots in India, Uganda and Jamaica. A comprehensive thematic analysis of semi-structured interviews (n=150 utility customers, n=32 WSP 'implementers' and n=9 WSP 'promoters'), field observations and related documents revealed 12 cultural themes, offered as 'enabling', 'limiting', or 'neutral', that influence WSP implementation in urban water utilities to varying extents. Aspects such as a 'deliver first, safety later' mind set; supply system knowledge management and storage practices; and non-compliance are deemed influential. Emergent themes of cultural influence (ET1 to ET12) are discussed by reference to the risk management, development studies and institutional culture literatures; by reference to their positive, negative or neutral influence on WSP implementation. The results have implications for the utility endorsement of WSPs, for the impact of organisational cultures on WSP implementation; for the scale-up of pilot studies; and they support repeated calls from practitioner communities for cultural attentiveness during WSP design. Findings on organisational cultures mirror those from utilities in higher income nations implementing WSPs - leadership, advocacy among promoters and customers (not just implementers) and purposeful knowledge management are critical to WSP success. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

How do chiropractors manage clinical risk? A questionnaire study.

PubMed

Wangler, Martin; Peterson, Cynthia; Zaugg, Beatrice; Thiel, Haymo; Finch, Rob

2013-06-08

The literature on chiropractic safety tends to focus on adverse events and little is known about how chiropractors ensure safety and manage risk in the course of their daily practice. The purpose of this study was to investigate how chiropractors manage potentially risky clinical scenarios. We also sought to establish how chiropractors perceive the safety climate in their workplace and thus whether there is an observable culture of safety within the profession. An online questionnaire was designed to determine which of nine management options would be chosen by the respondent in response to four defined clinical case scenarios. Safety climate within the respondent's practice setting was measured by seeking the level of agreement with 23 statements relating to six different safety dimensions. 260 licensed chiropractors in Switzerland and 1258 UK members of The Royal College of Chiropractors were invited to complete the questionnaire. Questionnaire responses were analysed quantitatively in respect of the four clinical scenarios and the nine management options to determine the likelihood of each option being undertaken, with results recorded in terms of % likelihood. Gender differences in response to the management options for each scenario were evaluated using the Mann-Whitney U (MWU) test. Positive agreement with elements comprising each of the six safety dimensions contributed to a composite '% positive agreement' score calculated for each dimension. Questionnaire responses were received from 76% (200/260) of Swiss participants and 31% (393/1258) of UK members of The Royal College of Chiropractors. There was a general trend for Swiss and UK chiropractors to manage clinical scenarios where treatment appears not to be successful, not indicated, possibly harmful or where a patient is apparently getting worse, by re-evaluating their care. Stopping treatment and/or incident reporting to a safety incident reporting and learning system were generally found to be unlikely

Listening to Excluded Young People's Experiences of e-Safety and Risk

ERIC Educational Resources Information Center

Cranmer, Sue

2013-01-01

This article reports on excluded young people's experiences with and management of e-safety and risk. It has importance in exploring these concerns given that excluded young people's voices are very often absent in education and technology research and yet they are potentially more at risk when using Information and Communication Technologies than…

[Medical safety management in the setting of a clinical reference laboratory--risk management efforts in clinical testing].

PubMed

Seki, Akira; Miya, Tetsumasa

2011-03-01

As a result of recurring medical accidents, risk management in the medical setting has been given much attention. The announcement in August, 2000 by the Ministry of Health committee for formulating a standard manual for risk management, of a "Risk management manual formulation guideline" has since been accompanied by the efforts of numerous medical testing facilities to develop such documents. In 2008, ISO/TS 22367:2008 on "Medical laboratories-Reduction of error through risk management and continual improvement" was published. However, at present, risk management within a medical testing facility stresses the implementation of provisional actions in response to a problem after it has occurred. Risk management is basically a planned process and includes "corrective actions" as well as "preventive actions." A corrective action is defined as identifying the root cause of the problem and removing it, and is conducted to prevent the problem from recurring. A preventive action is defined as identifying of the any potential problem and removing it, and is conducted to prevent a problem before it occurs. Presently, I shall report on the experiences of our laboratory regarding corrective and preventive actions taken in response to accidents and incidents, respectively.

Comparison of a Traditional Probabilistic Risk Assessment Approach with Advanced Safety Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Curtis L; Mandelli, Diego; Zhegang Ma

2014-11-01

As part of the Light Water Sustainability Program (LWRS) [1], the purpose of the Risk Informed Safety Margin Characterization (RISMC) [2] Pathway research and development (R&D) is to support plant decisions for risk-informed margin management with the aim to improve economics, reliability, and sustain safety of current NPPs. In this paper, we describe the RISMC analysis process illustrating how mechanistic and probabilistic approaches are combined in order to estimate a safety margin. We use the scenario of a “station blackout” (SBO) wherein offsite power and onsite power is lost, thereby causing a challenge to plant safety systems. We describe themore » RISMC approach, illustrate the station blackout modeling, and contrast this with traditional risk analysis modeling for this type of accident scenario. We also describe our approach we are using to represent advanced flooding analysis.« less

Consumer responses to communication about food risk management.

PubMed

van Dijk, Heleen; Houghton, Julie; van Kleef, Ellen; van der Lans, Ivo; Rowe, Gene; Frewer, Lynn

2008-01-01

Recent emphasis within policy circles has been on transparent communication with consumers about food risk management decisions and practices. As a consequence, it is important to develop best practice regarding communication with the public about how food risks are managed. In the current study, the provision of information about regulatory enforcement, proactive risk management, scientific uncertainty and risk variability were manipulated in an experiment designed to examine their impact on consumer perceptions of food risk management quality. In order to compare consumer reactions across different cases, three food hazards were selected (mycotoxins on organically grown food, pesticide residues, and a genetically modified potato). Data were collected from representative samples of consumers in Germany, Greece, Norway and the UK. Scores on the "perceived food risk management quality" scale were subjected to a repeated-measures mixed linear model. Analysis points to a number of important findings, including the existence of cultural variation regarding the impact of risk communication strategies-something which has obvious implications for pan-European risk communication approaches. For example, while communication of uncertainty had a positive impact in Germany, it had a negative impact in the UK and Norway. Results also indicate that food risk managers should inform the public about enforcement of safety laws when communicating scientific uncertainty associated with risks. This has implications for the coordination of risk communication strategies between risk assessment and risk management organizations.

Safety management practices in small and medium enterprises in India.

PubMed

Unnikrishnan, Seema; Iqbal, Rauf; Singh, Anju; Nimkar, Indrayani M

2015-03-01

Small and medium enterprises (SMEs) are often the main pillar of an economy. Minor accidents, ergonomics problems, old and outdated machinery, and lack of awareness have created a need for implementation of safety practices in SMEs. Implementation of healthy working conditions creates positive impacts on economic and social development. In this study, a questionnaire was developed and administered to 30 randomly chosen SMEs in and around Mumbai, Maharashtra, and other states in India to evaluate safety practices implemented in their facilities. The study also looked into the barriers and drivers for technology innovation and suggestions were also received from the respondent SMEs for best practices on safety issues. In some SMEs, risks associated with safety issues were increased whereas risks were decreased in others. Safety management practices are inadequate in most SMEs. Market competitiveness, better efficiency, less risk, and stringent laws were found to be most significant drivers; and financial constraints, lack of awareness, resistance to change, and lack of training for employees were found to be main barriers. Competition between SMEs was found to be major reason for implementation of safety practices in the SMEs. The major contribution of the study has been awareness building on safety issues in the SMEs that participated in the project.

Safety Management Practices in Small and Medium Enterprises in India

PubMed Central

Unnikrishnan, Seema; Iqbal, Rauf; Singh, Anju; Nimkar, Indrayani M.

2014-01-01

Background Small and medium enterprises (SMEs) are often the main pillar of an economy. Minor accidents, ergonomics problems, old and outdated machinery, and lack of awareness have created a need for implementation of safety practices in SMEs. Implementation of healthy working conditions creates positive impacts on economic and social development. Methods In this study, a questionnaire was developed and administered to 30 randomly chosen SMEs in and around Mumbai, Maharashtra, and other states in India to evaluate safety practices implemented in their facilities. The study also looked into the barriers and drivers for technology innovation and suggestions were also received from the respondent SMEs for best practices on safety issues. Results In some SMEs, risks associated with safety issues were increased whereas risks were decreased in others. Safety management practices are inadequate in most SMEs. Market competitiveness, better efficiency, less risk, and stringent laws were found to be most significant drivers; and financial constraints, lack of awareness, resistance to change, and lack of training for employees were found to be main barriers. Conclusion Competition between SMEs was found to be major reason for implementation of safety practices in the SMEs. The major contribution of the study has been awareness building on safety issues in the SMEs that participated in the project. PMID:25830070

[Legal and methodical aspects of occupational risk management].

PubMed

2011-01-01

Legal and methodical aspects of occupational risk management (ORM) are considered with account of new official documents. Introduction of risk and risk management notions into Labor Code reflects the change of forms of occupational health and safety. The role of hygienist and occupational medicine professionals in workplace conditions certification (WCC) and periodical medical examinations (PME) is strengthened. The ORM could be improved by introducing the block of prognosis and causation based on IT-technologies that could match systems of WCC and PME thus improving the effectiveness of prophylactics.

Towards integrated hygiene and food safety management systems: the Hygieneomic approach.

PubMed

Armstrong, G D

1999-09-15

Integrated hygiene and food safety management systems in food production can give rise to exceptional improvements in food safety performance, but require high level commitment and full functional involvement. A new approach, named hygieneomics, has been developed to assist management in their introduction of hygiene and food safety systems. For an effective introduction, the management systems must be designed to fit with the current generational state of an organisation. There are, broadly speaking, four generational states of an organisation in their approach to food safety. They comprise: (i) rules setting; (ii) ensuring compliance; (iii) individual commitment; (iv) interdependent action. In order to set up an effective integrated hygiene and food safety management system a number of key managerial requirements are necessary. The most important ones are: (a) management systems must integrate the activities of key functions from research and development through to supply chain and all functions need to be involved; (b) there is a critical role for the senior executive, in communicating policy and standards; (c) responsibilities must be clearly defined, and it should be clear that food safety is a line management responsibility not to be delegated to technical or quality personnel; (d) a thorough and effective multi-level audit approach is necessary; (e) key activities in the system are HACCP and risk management, but it is stressed that these are ongoing management activities, not once-off paper generating exercises; and (f) executive management board level review is necessary of audit results, measurements, status and business benefits.

Integrated Risk Management Within NASA Programs/Projects

NASA Technical Reports Server (NTRS)

Connley, Warren; Rad, Adrian; Botzum, Stephen

2004-01-01

As NASA Project Risk Management activities continue to evolve, the need to successfully integrate risk management processes across the life cycle, between functional disciplines, stakeholders, various management policies, and within cost, schedule and performance requirements/constraints become more evident and important. Today's programs and projects are complex undertakings that include a myriad of processes, tools, techniques, management arrangements and other variables all of which must function together in order to achieve mission success. The perception and impact of risk may vary significantly among stakeholders and may influence decisions that may have unintended consequences on the project during a future phase of the life cycle. In these cases, risks may be unintentionally and/or arbitrarily transferred to others without the benefit of a comprehensive systemic risk assessment. Integrating risk across people, processes, and project requirements/constraints serves to enhance decisions, strengthen communication pathways, and reinforce the ability of the project team to identify and manage risks across the broad spectrum of project management responsibilities. The ability to identify risks in all areas of project management increases the likelihood a project will identify significant issues before they become problems and allows projects to make effective and efficient use of shrinking resources. By getting a total team integrated risk effort, applying a disciplined and rigorous process, along with understanding project requirements/constraints provides the opportunity for more effective risk management. Applying an integrated approach to risk management makes it possible to do a better job at balancing safety, cost, schedule, operational performance and other elements of risk. This paper will examine how people, processes, and project requirements/constraints can be integrated across the project lifecycle for better risk management and ultimately improve the

Do expert assessments converge? An exploratory case study of evaluating and managing a blood supply risk.

PubMed

Eyles, John; Heddle, Nancy; Webert, Kathryn; Arnold, Emmy; McCurdy, Bronwen

2011-08-24

Examining professional assessments of a blood product recall/withdrawal and its implications for risk and public health, the paper introduces ideas about perceptions of minimal risk and its management. It also describes the context of publicly funded blood transfusion in Canada and the withdrawal event that is the basis of this study. Interviews with 45 experts from administration, medicine, blood supply, laboratory services and risk assessment took place using a multi-level sampling framework in the aftermath of the recall. These experts either directly dealt with the withdrawal or were involved in the management of the blood supply at the national level. Data from these interviews were coded in NVivo for analysis and interpretation. Analytically, data were interpreted to derive typifications to relate interview responses to risk management heuristics. While all those interviewed agreed on the importance of patient safety, differences in the ways in which the risk was contextualized and explicated were discerned. Risk was seen in terms of patient safety, liability or precaution. These different risk logics are illustrated by selected quotations. Expert assessments did not fully converge and it is possible that these different risk logics and discourses may affect the risk management process more generally, although not necessarily in a negative way. Patient safety is not to be compromised but management of blood risk in publicly funded systems may vary. We suggest ways of managing blood risk using formal and safety case approaches.

Do expert assessments converge? An exploratory case study of evaluating and managing a blood supply risk

PubMed Central

2011-01-01

Background Examining professional assessments of a blood product recall/withdrawal and its implications for risk and public health, the paper introduces ideas about perceptions of minimal risk and its management. It also describes the context of publicly funded blood transfusion in Canada and the withdrawal event that is the basis of this study. Methods Interviews with 45 experts from administration, medicine, blood supply, laboratory services and risk assessment took place using a multi-level sampling framework in the aftermath of the recall. These experts either directly dealt with the withdrawal or were involved in the management of the blood supply at the national level. Data from these interviews were coded in NVivo for analysis and interpretation. Analytically, data were interpreted to derive typifications to relate interview responses to risk management heuristics. Results While all those interviewed agreed on the importance of patient safety, differences in the ways in which the risk was contextualized and explicated were discerned. Risk was seen in terms of patient safety, liability or precaution. These different risk logics are illustrated by selected quotations. Conclusions Expert assessments did not fully converge and it is possible that these different risk logics and discourses may affect the risk management process more generally, although not necessarily in a negative way. Patient safety is not to be compromised but management of blood risk in publicly funded systems may vary. We suggest ways of managing blood risk using formal and safety case approaches. PMID:21864330

Collaborative Approaches in Developing Environmental and Safety Management Systems for Commercial Space Transportation

NASA Technical Reports Server (NTRS)

Zee, Stacey; Murray, D.

2009-01-01

The Federal Aviation Administration (FAA), Office of Commercial Space Transportation (AST) licenses and permits U.S. commercial space launch and reentry activities, and licenses the operation of non-federal launch and reentry sites. ASTs mission is to ensure the protection of the public, property, and the national security and foreign policy interests of the United States during commercial space transportation activities and to encourage, facilitate, and promote U.S. commercial space transportation. AST faces unique challenges of ensuring the protection of public health and safety while facilitating and promoting U.S. commercial space transportation. AST has developed an Environmental Management System (EMS) and a Safety Management System (SMS) to help meet its mission. Although the EMS and SMS were developed independently, the systems share similar elements. Both systems follow a Plan-Do-Act-Check model in identifying potential environmental aspects or public safety hazards, assessing significance in terms of severity and likelihood of occurrence, developing approaches to reduce risk, and verifying that the risk is reduced. This paper will describe the similarities between ASTs EMS and SMS elements and how AST is building a collaborative approach in environmental and safety management to reduce impacts to the environment and risks to the public.

A Semantic Approach with Decision Support for Safety Service in Smart Home Management

PubMed Central

Huang, Xiaoci; Yi, Jianjun; Zhu, Xiaomin; Chen, Shaoli

2016-01-01

Research on smart homes (SHs) has increased significantly in recent years because of the convenience provided by having an assisted living environment. The functions of SHs as mentioned in previous studies, particularly safety services, are seldom discussed or mentioned. Thus, this study proposes a semantic approach with decision support for safety service in SH management. The focus of this contribution is to explore a context awareness and reasoning approach for risk recognition in SH that enables the proper decision support for flexible safety service provision. The framework of SH based on a wireless sensor network is described from the perspective of neighbourhood management. This approach is based on the integration of semantic knowledge in which a reasoner can make decisions about risk recognition and safety service. We present a management ontology for a SH and relevant monitoring contextual information, which considers its suitability in a pervasive computing environment and is service-oriented. We also propose a rule-based reasoning method to provide decision support through reasoning techniques and context-awareness. A system prototype is developed to evaluate the feasibility, time response and extendibility of the approach. The evaluation of our approach shows that it is more effective in daily risk event recognition. The decisions for service provision are shown to be accurate. PMID:27527170

A Semantic Approach with Decision Support for Safety Service in Smart Home Management.

PubMed

Huang, Xiaoci; Yi, Jianjun; Zhu, Xiaomin; Chen, Shaoli

2016-08-03

Research on smart homes (SHs) has increased significantly in recent years because of the convenience provided by having an assisted living environment. The functions of SHs as mentioned in previous studies, particularly safety services, are seldom discussed or mentioned. Thus, this study proposes a semantic approach with decision support for safety service in SH management. The focus of this contribution is to explore a context awareness and reasoning approach for risk recognition in SH that enables the proper decision support for flexible safety service provision. The framework of SH based on a wireless sensor network is described from the perspective of neighbourhood management. This approach is based on the integration of semantic knowledge in which a reasoner can make decisions about risk recognition and safety service. We present a management ontology for a SH and relevant monitoring contextual information, which considers its suitability in a pervasive computing environment and is service-oriented. We also propose a rule-based reasoning method to provide decision support through reasoning techniques and context-awareness. A system prototype is developed to evaluate the feasibility, time response and extendibility of the approach. The evaluation of our approach shows that it is more effective in daily risk event recognition. The decisions for service provision are shown to be accurate.

Workplace bullying in risk and safety professionals.

PubMed

Brewer, Gayle; Holt, Barry; Malik, Shahzeb

2018-02-01

Previous research demonstrates that workplace bullying impacts the welfare of victimized employees, with further consequences for the organization and profession. There is, however, a paucity of information relating to the bullying directed at risk and safety professionals. The present study was conducted to address this issue. Risk and safety professionals (N=420) completed the Negative Acts Questionnaire - Revised and Brief Cope, and reported the extent to which they had been pressured to make or amend a risk or safety based decision. Those experiencing workplace bullying were more likely to engage in a range of coping behaviors, with exposure to work-related and personal bullying particularly influential. Workplace bullying also predicted pressure to make or change a risk or safety based decision. Work related and physically intimidating bullying were particularly important for this aspect of professional practice. Findings are discussed with regard to current practice and the support available to risk and safety professionals. Risk and safety professionals require additional support in relation to workplace bullying and specifically guidance to resist pressure to make or change a risk or safety based decision. Copyright © 2017 National Safety Council and Elsevier Ltd. All rights reserved.

A 3S Risk ?3SR? Assessment Approach for Nuclear Power: Safety Security and Safeguards.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Forrest, Robert; Reinhardt, Jason Christian; Wheeler, Timothy A.

Safety-focused risk analysis and assessment approaches struggle to adequately include malicious, deliberate acts against the nuclear power industry's fissile and waste material, infrastructure, and facilities. Further, existing methods do not adequately address non- proliferation issues. Treating safety, security, and safeguards concerns independently is inefficient because, at best, it may not take explicit advantage of measures that provide benefits against multiple risk domains, and, at worst, it may lead to implementations that increase overall risk due to incompatibilities. What is needed is an integrated safety, security and safeguards risk (or "3SR") framework for describing and assessing nuclear power risks that canmore » enable direct trade-offs and interactions in order to inform risk management processes -- a potential paradigm shift in risk analysis and management. These proceedings of the Sandia ePRA Workshop (held August 22-23, 2017) are an attempt to begin the discussions and deliberations to extend and augment safety focused risk assessment approaches to include security concerns and begin moving towards a 3S Risk approach. Safeguards concerns were not included in this initial workshop and are left to future efforts. This workshop focused on four themes in order to begin building out a the safety and security portions of the 3S Risk toolkit: 1. Historical Approaches and Tools 2. Current Challenges 3. Modern Approaches 4. Paths Forward and Next Steps This report is organized along the four areas described above, and concludes with a summary of key points. 2 Contact: rforres@sandia.gov; +1 (925) 294-2728« less

Hazard Identification and Risk Assessment in Water Treatment Plant considering Environmental Health and Safety Practice

NASA Astrophysics Data System (ADS)

Falakh, Fajrul; Setiani, Onny

2018-02-01

Water Treatment Plant (WTP) is an important infrastructure to ensure human health and the environment. In its development, aspects of environmental safety and health are of concern. This paper case study was conducted at the Water Treatment Plant Company in Semarang, Central Java, Indonesia. Hazard identification and risk assessment is one part of the occupational safety and health program at the risk management stage. The purpose of this study was to identify potential hazards using hazard identification methods and risk assessment methods. Risk assessment is done using criteria of severity and probability of accident. The results obtained from this risk assessment are 22 potential hazards present in the water purification process. Extreme categories that exist in the risk assessment are leakage of chlorine and industrial fires. Chlorine and fire leakage gets the highest value because its impact threatens many things, such as industrial disasters that could endanger human life and the environment. Control measures undertaken to avoid potential hazards are to apply the use of personal protective equipment, but management will also be better managed in accordance with hazard control hazards, occupational safety and health programs such as issuing work permits, emergency response training is required, Very useful in overcoming potential hazards that have been determined.

Documentary analysis of risk-assessment and safety-planning policies and tools in a mental health context.

PubMed

Higgins, Agnes; Doyle, Louise; Morrissey, Jean; Downes, Carmel; Gill, Ailish; Bailey, Sive

2016-08-01

Despite the articulated need for policies and processes to guide risk assessment and safety planning, limited guidance exists on the processes or procedures to be used to develop such policies, and there is no body of research that examines the quality or content of the risk-management policies developed. The aim of the present study was to analyse the policies of risk and safety management used to guide mental health nursing practice in Ireland. A documentary analysis was performed on 123 documents received from 22 of the 23 directors of nursing contacted. Findings from the analysis revealed a wide variation in how risk, risk assessment, and risk management were defined. Emphasis within the risk documentation submitted was on risk related to self and others, with minimal attention paid to other types of risks. In addition, there was limited evidence of recovery-focused approaches to positive risk taking that involved service users and their families within the risk-related documentation. Many of the risk-assessment tools had not been validated, and lacked consistency or guidance in relation to how they were to be used or applied. The tick-box approach and absence of space for commentary within documentation have the potential to impact severely on the quality of information collected and documented, and subsequent clinical decision-making. Managers, and those tasked with ensuring safety and quality, need to ensure that policies and processes are, where possible, informed by best evidence and are in line with national mental health policy on recovery. © 2016 Australian College of Mental Health Nurses Inc.

Integrated risk assessment and screening analysis of drinking water safety of a conventional water supply system.

PubMed

Sun, F; Chen, J; Tong, Q; Zeng, S

2007-01-01

Management of drinking water safety is changing towards an integrated risk assessment and risk management approach that includes all processes in a water supply system from catchment to consumers. However, given the large number of water supply systems in China and the cost of implementing such a risk assessment procedure, there is a necessity to first conduct a strategic screening analysis at a national level. An integrated methodology of risk assessment and screening analysis is thus proposed to evaluate drinking water safety of a conventional water supply system. The violation probability, indicating drinking water safety, is estimated at different locations of a water supply system in terms of permanganate index, ammonia nitrogen, turbidity, residual chlorine and trihalomethanes. Critical parameters with respect to drinking water safety are then identified, based on which an index system is developed to prioritize conventional water supply systems in implementing a detailed risk assessment procedure. The evaluation results are represented as graphic check matrices for the concerned hazards in drinking water, from which the vulnerability of a conventional water supply system is characterized.

Qualitative Future Safety Risk Identification an Update

NASA Technical Reports Server (NTRS)

Barr, Lawrence C.

2017-01-01

The purpose of this report is to document the results of a high-level qualitative study that was conducted to identify future aviation safety risks and to assess the potential impacts to the National Airspace System (NAS) of NASA Aviation Safety research on these risks. Multiple external sources (for example, the National Transportation Safety Board, the Flight Safety Foundation, the National Research Council, and the Joint Planning and Development Office) were used to develop a compilation of future safety issues risks, also referred to as future tall poles. The primary criterion used to identify the most critical future safety risk issues was that the issue must be cited in several of these sources as a safety area of concern. The tall poles in future safety risk, in no particular order of importance, are as follows: Runway Safety, Loss of Control In Flight, Icing Ice Detection, Loss of Separation, Near Midair Collision Human Fatigue, Increasing Complexity and Reliance on Automation, Vulnerability Discovery, Data Sharing and Dissemination, and Enhanced Survivability in the Event of an Accident.

A model of Occupational Safety and Health Management System (OSHMS) for promoting and controlling health and safety in textile industry.

PubMed

Manimaran, S; Rajalakshmi, R; Bhagyalakshmi, K

2015-01-01

The development of Occupational Safety and Health Management System in textile industry will rejuvenate the workers and energize the economy as a whole. In India, especially in Tamil Nadu, approximately 1371 textile business is running with the help of 38,461 workers under Ginning, Spinning, Weaving, Garment and Dyeing sectors. Textile industry of contributes to the growth of Indian economy but it fails to foster education and health as key components of human development and help new democracies. The present work attempts to measure and develop OSHMS which reduce the hazards and risk involved in textile industry. Among all other industries textile industry is affected by enormous hazards and risk because of negligence by management and Government. It is evident that managements are not abiding by law when an accident has occurred. Managements are easily deceiving workers and least bothered about the Quality of Work Life (QWL). A detailed analysis of factors promoting safety and health to the workers has been done by performing confirmatory factor analysis, evaluating Risk Priority Number and the framework of OHMS has been conceptualized using Structural Equation Model. The data have been collected using questionnaire and interview method. The study finds occupation health for worker in Textile industry is affected not only by safety measure but also by technology and management. The work shows that difficulty in identifying the cause and effect of hazards, the influence of management in controlling and promoting OSHMS under various dimensions. One startling fact is existence of very low and insignificance correlation between health factors and outcome.

Risk management in the North sea offshore industry: History, status and challenges

NASA Astrophysics Data System (ADS)

Smith, E. J.

1995-10-01

There have been major changes in the UK and Norwegian offshore safety regimes in the last decade. On the basis of accumulated experience (including some major accidents), there has been a move away from a rigid, prescriptive approach to setting safety standards; it is now recognised that a more flexible, "goal-setting" approach is more suited to achieving cost-effective solutions to offshore safety. In order to adapt to this approach, offshore operators are increasingly using Quantitative Risk Assessment (QRA) techniques as part of their risk management programmes. Structured risk assessment can be used at all stages of a project life-cycle. In the design stages (concept and detailed design), these techniques are valuable tools in ensuring that money is wisely spent on safety-related systems. In the operational stage, QRA can aid the development of procedures. High quality Safety Management Systems (SMSs), covering issues such as training, inspection, and emergency planning, are crucial to maintain "asdesigned" levels of safety and reliability. Audits of SMSs should be carried out all through the operational phase to ensure that risky conditions do not accumulate.

Safety, Health, and Fire Prevention Guide for Hospital Safety Managers

DTIC Science & Technology

1993-03-01

Safety committee S 2-5 Oxygen quality assurance program 0 2-6 Safety and fire prevention library 0 2-7 Safety services to Dental Activities • 2-8...Chapter 2 Safety Management 2-1. Safety policy statement Health Services Command (HSC) Supplement (Suppl) 1 to Army Regulation (AR) 385-10 and the...Management. (b) The medical staff. (c) The nursing service . (d) Logistics. (e) Nutritional care. (f) Preventive medicine. * 2-3 USAEHA TG No. 152 March 1993 (g

Food safety management and risk assessment in the fresh produce supply chain

NASA Astrophysics Data System (ADS)

Jacxsens, L.; Uyttendaele, M.; Luning, P.; Allende, A.

2017-04-01

This paper is the output of several years of scientific research coordinated by Laboratory of Food Preservation and Food Microbiology at UGent, within the EU FP7 Research project Veg-i-trade (www.vegitrade.org), in collaboration with among other partners, Wageningen University and Cebas-CSIC. Fresh produce and derived products are globally traded and subjected to an inherent sensitive towards enteric pathogens as Salmonella and pathogenic E. coli due to their cultivation practices. As fruits and vegetables are increasingly being consumed raw, a potential health risk towards consumers is present. In the Veg-i-Trade project the extend of presence of pathogens in leafy greens and strawberry fruit and their cultivation environment (as water, soil, manured soil, etc.) was analysed. Insight in the food safety management system enlighted the need for further fostering and guidance towards farmers in good practices in order to reduce the potential pressure of the presence of the pathogens both in EU and non EU countries. Exposure assessment calculations demonstrated the usefulness of mathematic modelling to gain more insight in fragmented microbiological analysis and information of cultivation practices, as such the impact of contamination of irrigation water and the impact of a flooding event. Veg-i-Trade was a challenging project both in scientific and management perspective as 23 partners collaborated.

Management of occupational health risks in small-animal veterinary practices.

PubMed

D'Souza, Eva; Barraclough, Richard; Fishwick, David; Curran, Andrew

2009-08-01

Small-animal work is a major element of veterinary practice in the UK and may be hazardous, with high levels of work-related injuries and ill-health reported in Australia and USA. There are no studies addressing the management of occupational health risks arising from small-animal work in the UK. To investigate the sources of health and safety information used and how health and safety and 12 specific occupational health risks are managed by practices. A cross-sectional postal survey of all small-animal veterinary practices in Hampshire. A response was mandatory as this was a Health & Safety Executive (HSE) inspection activity. A total of 118 (100%) practices responded of which 93 were eligible for inclusion. Of these, 99 and 86%, respectively, were aware of the Royal College of Veterinary Surgeons (RCVS) practice standards and had British Small Animal Veterinary Association (BSAVA) staff members, while only 51% had previous contact with HSE (publications, advice and visit). Ninety per cent had health and safety policies, but only 31% had trained responsible staff in health and safety. Specific health hazards such as occupational allergens and computer use were relatively overlooked both by practices and the RCVS/BSAVA guidance available in 2002. Failings in active health risk management systems could be due to a lack of training to ensure competence in those with responsibilities. Practices rely on guidance produced by their professional bodies. Current RCVS guidance, available since 2005, has remedied some previous omissions, but further improvements are recommended.

Investigating the connections between health lean management and clinical risk management.

PubMed

Crema, Maria; Verbano, Chiara

2015-01-01

The purpose of this paper is to investigate connections and overlaps between health lean management (HLM) and clinical risk management (CRM) understanding whether and how these two approaches can be combined together to pursue efficiency and patient safety improvements simultaneously. A systematic literature review has been carried out. Searching in academic databases, papers that focus not only on HLM, but also on clinical errors and risk reduction, were included. The general characteristics of the selected papers were analysed and a content analysis was conducted. In most of the papers, pursing objectives of HLM and CRM and adopting tools and practices of both approaches, results of quality and, particularly, of safety improvements were obtained. A two-way arrow between HLM and CRM emerged but so far, none of the studies has been focused on the relationship between HLM and CRM. Results highlight an emerging research stream, with many useful theoretical and practical implications and opportunities for further research.

[Analysis of the safety culture in a Cardiology Unit managed by processes].

PubMed

Raso-Raso, Rafael; Uris-Selles, Joaquín; Nolasco-Bonmatí, Andreu; Grau-Jornet, Guillermo; Revert-Gandia, Rosa; Jiménez-Carreño, Rebeca; Sánchez-Soriano, Ruth M; Chamorro-Fernández, Carlos I; Marco-Francés, Elvira; Albero-Martínez, José V

2017-04-04

Safety culture is one of the requirements for preventing the occurrence of adverse effects. However, this has not been studied in the field of cardiology. The aim of this study is to evaluate the safety culture in a cardiology unit that has implemented and certified an integrated quality and risk management system for patient safety. A cross-sectional observational study was conducted in 2 consecutive years, with all staff completing the Spanish version of the questionnaire, "Hospital Survey on Patient Safety Culture" of the "Agency for Healthcare Research and Quality", with 42 items grouped into 12 dimensions. The percentage of positive responses in each dimension in 2014 and 2015 were compared, as well as national data and United States data, following the established rules. The overall assessment out of a possible 5, was 4.5 in 2014 and 4.7 in 2015. Seven dimensions were identified as strengths. The worst rated were: staffing, management support and teamwork between units. The comparison showed superiority in all dimensions compared to national data, and in 8 of them compared to American data. The safety culture in a Cardiology Unit with an integrated quality and risk management patient safety system is high, and higher than nationally in all its dimensions and in most of them compared to the United States. Copyright © 2017 Instituto Nacional de Cardiología Ignacio Chávez. Publicado por Masson Doyma México S.A. All rights reserved.

Safety management in multiemployer worksites in the manufacturing industry: opinions on co-operation and problems encountered.

PubMed

Nenonen, Sanna; Vasara, Juha

2013-01-01

Co-operation between different parties and effective safety management play an important role in ensuring safety in multiemployer worksites. This article reviews safety co-operation and factors complicating safety management in Finnish multiemployer manufacturing worksites. The paper focuses on the service providers' opinions; however, a comparison of the customers' views is also presented. The results show that safety-related co-operation between providers and customers is generally considered as successful but strongly dependent on the partner. Safety co-operation is provided through, e.g., training, orientation and risk analysis. Problems encountered include ensuring adequate communication, identifying hazards, co-ordinating work tasks and determining responsibilities. The providers and the customers encounter similar safety management problems. The results presented in this article can help companies to focus their efforts on the most problematic points of safety management and to avoid common pitfalls.

C-Band Airport Surface Communications System Engineering-Initial High-Level Safety Risk Assessment and Mitigation

NASA Technical Reports Server (NTRS)

Zelkin, Natalie; Henriksen, Stephen

2011-01-01

This document is being provided as part of ITT's NASA Glenn Research Center Aerospace Communication Systems Technical Support (ACSTS) contract: "New ATM Requirements--Future Communications, C-Band and L-Band Communications Standard Development." ITT has completed a safety hazard analysis providing a preliminary safety assessment for the proposed C-band (5091- to 5150-MHz) airport surface communication system. The assessment was performed following the guidelines outlined in the Federal Aviation Administration Safety Risk Management Guidance for System Acquisitions document. The safety analysis did not identify any hazards with an unacceptable risk, though a number of hazards with a medium risk were documented. This effort represents an initial high-level safety hazard analysis and notes the triggers for risk reassessment. A detailed safety hazards analysis is recommended as a follow-on activity to assess particular components of the C-band communication system after the profile is finalized and system rollout timing is determined. A security risk assessment has been performed by NASA as a parallel activity. While safety analysis is concerned with a prevention of accidental errors and failures, the security threat analysis focuses on deliberate attacks. Both processes identify the events that affect operation of the system; and from a safety perspective the security threats may present safety risks.

Probabilistic Risk Assessment Procedures Guide for NASA Managers and Practitioners (Second Edition)

NASA Technical Reports Server (NTRS)

Stamatelatos,Michael; Dezfuli, Homayoon; Apostolakis, George; Everline, Chester; Guarro, Sergio; Mathias, Donovan; Mosleh, Ali; Paulos, Todd; Riha, David; Smith, Curtis;

Information systems in food safety management.

PubMed

McMeekin, T A; Baranyi, J; Bowman, J; Dalgaard, P; Kirk, M; Ross, T; Schmid, S; Zwietering, M H

2006-12-01

Information systems are concerned with data capture, storage, analysis and retrieval. In the context of food safety management they are vital to assist decision making in a short time frame, potentially allowing decisions to be made and practices to be actioned in real time. Databases with information on microorganisms pertinent to the identification of foodborne pathogens, response of microbial populations to the environment and characteristics of foods and processing conditions are the cornerstone of food safety management systems. Such databases find application in: Identifying pathogens in food at the genus or species level using applied systematics in automated ways. Identifying pathogens below the species level by molecular subtyping, an approach successfully applied in epidemiological investigations of foodborne disease and the basis for national surveillance programs. Predictive modelling software, such as the Pathogen Modeling Program and Growth Predictor (that took over the main functions of Food Micromodel) the raw data of which were combined as the genesis of an international web based searchable database (ComBase). Expert systems combining databases on microbial characteristics, food composition and processing information with the resulting "pattern match" indicating problems that may arise from changes in product formulation or processing conditions. Computer software packages to aid the practical application of HACCP and risk assessment and decision trees to bring logical sequences to establishing and modifying food safety management practices. In addition there are many other uses of information systems that benefit food safety more globally, including: Rapid dissemination of information on foodborne disease outbreaks via websites or list servers carrying commentary from many sources, including the press and interest groups, on the reasons for and consequences of foodborne disease incidents. Active surveillance networks allowing rapid dissemination

Relational approach in managing construction project safety: a social capital perspective.

PubMed

Koh, Tas Yong; Rowlinson, Steve

2012-09-01

Existing initiatives in the management of construction project safety are largely based on normative compliance and error prevention, a risk management approach. Although advantageous, these approaches are not wholly successful in further lowering accident rates. A major limitation lies with the approaches' lack of emphasis on the social and team processes inherent in construction project settings. We advance the enquiry by invoking the concept of social capital and project organisational processes, and their impacts on project safety performance. Because social capital is a primordial concept and affects project participants' interactions, its impact on project safety performance is hypothesised to be indirect, i.e. the impact of social capital on safety performance is mediated by organisational processes in adaptation and cooperation. A questionnaire survey was conducted within Hong Kong construction industry to test the hypotheses. 376 usable responses were received and used for analyses. The results reveal that, while the structural dimension is not significant, the mediational thesis is generally supported with the cognitive and relational dimensions affecting project participants' adaptation and cooperation, and the latter two processes affect safety performance. However, the cognitive dimension also directly affects safety performance. The implications of these results for project safety management are discussed. Copyright © 2011 Elsevier Ltd. All rights reserved.

Violence and legalized brothel prostitution in Nevada: examining safety, risk, and prostitution policy.

PubMed

Brents, Barbara G; Hausbeck, Kathryn

2005-03-01

This article examines violence in legalized brothels in Nevada. Debates over prostitution policies in the United States have long focused on questions of safety and risk. These discourses inevitably invoke the coupling of violence and prostitution, though systematic examinations of the relationship between the two are sparse. This article explores the issue of violence in the Nevada brothel industry. By drawing on interviews with prostitutes, managers, and policy makers, this article examines both prostitutes' perceptions of safety and risk and brothel managers' practices designed to mitigate violence. Discourses relate to three types of violence: interpersonal violence against prostitutes, violence against community order, and sexually transmitted diseases as violence. The authors conclude by arguing that the legalization of prostitution brings a level of public scrutiny, official regulation, and bureaucratization to brothels that decreases the risk of these 3 types of systematic violence.

Cost effective management of space venture risks

NASA Technical Reports Server (NTRS)

Giuntini, Ronald E.; Storm, Richard E.

1986-01-01

The development of a model for the cost-effective management of space venture risks is discussed. The risk assessment and control program of insurance companies is examined. A simplified system development cycle which consists of a conceptual design phase, a preliminary design phase, a final design phase, a construction phase, and a system operations and maintenance phase is described. The model incorporates insurance safety risk methods and reliability engineering, and testing practices used in the development of large aerospace and defense systems.

Application of Risk Assessment Tools in the Continuous Risk Management (CRM) Process

NASA Technical Reports Server (NTRS)

Ray, Paul S.

2002-01-01

Marshall Space Flight Center (MSFC) of the National Aeronautics and Space Administration (NASA) is currently implementing the Continuous Risk Management (CRM) Program developed by the Carnegie Mellon University and recommended by NASA as the Risk Management (RM) implementation approach. The four most frequently used risk assessment tools in the center are: (a) Failure Modes and Effects Analysis (FMEA), Hazard Analysis (HA), Fault Tree Analysis (FTA), and Probabilistic Risk Analysis (PRA). There are some guidelines for selecting the type of risk assessment tools during the project formulation phase of a project, but there is not enough guidance as to how to apply these tools in the Continuous Risk Management process (CRM). But the ways the safety and risk assessment tools are used make a significant difference in the effectiveness in the risk management function. Decisions regarding, what events are to be included in the analysis, to what level of details should the analysis be continued, make significant difference in the effectiveness of risk management program. Tools of risk analysis also depends on the phase of a project e.g. at the initial phase of a project, when not much data are available on hardware, standard FMEA cannot be applied; instead a functional FMEA may be appropriate. This study attempted to provide some directives to alleviate the difficulty in applying FTA, PRA, and FMEA in the CRM process. Hazard Analysis was not included in the scope of the study due to the short duration of the summer research project.

Engineering Management Capstone Project EM 697: Compare and Contrast Risk Management Implementation at NASA and the US Army

NASA Technical Reports Server (NTRS)

Brothers, Mary Ann; Safie, Fayssal M. (Technical Monitor)

2002-01-01

NASA at Marshall Space Flight Center (MSFC) and the U.S. Army at Redstone Arsenal were analyzed to determine whether they were successful in implementing their risk management program. Risk management implementation surveys were distributed to aid in this analysis. The scope is limited to NASA S&MA (Safety and Mission Assurance) at MSFC, including applicable support contractors, and the US Army Engineering Directorate, including applicable contractors, located at Redstone Arsenal. NASA has moderately higher risk management implementation survey scores than the Army. Accordingly, the implementation of the risk management program at NASA is considered good while only two of five of the survey categories indicated that the risk management implementation is good at the Army.

Managing uncertainty about food risks - Consumer use of food labelling.

PubMed

Tonkin, Emma; Coveney, John; Meyer, Samantha B; Wilson, Annabelle M; Webb, Trevor

2016-12-01

General consumer knowledge of and engagement with the production of food has declined resulting in increasing consumer uncertainty about, and sensitivity to, food risks. Emphasis is therefore placed on providing information for consumers to reduce information asymmetry regarding food risks, particularly through food labelling. This study examines the role of food labelling in influencing consumer perceptions of food risks. In-depth, 1-h interviews were conducted with 24 Australian consumers. Participants were recruited based on an a priori defined food safety risk scale, and to achieve a diversity of demographic characteristics. The methodological approach used, adaptive theory, was chosen to enable a constant interweaving of theoretical understandings and empirical data throughout the study. Participants discussed perceiving both traditional (food spoilage/microbial contamination) and modern (social issues, pesticide and 'chemical' contamination) risks as present in the food system. Food labelling was a symbol of the food system having managed traditional risks, and a tool for consumers to personally manage perceived modern risks. However, labelling also raised awareness of modern risks not previously considered. The consumer framing of risk presented demonstrates the need for more meaningful consumer engagement in policy decision making to ensure risk communication and management meet public expectations. This research innovatively identifies food labelling as both a symbol of, and a tool for, the management of perceived risks for consumers. Therefore it is imperative that food system actors ensure the authenticity and trustworthiness of all aspects of food labelling, not only those related to food safety. Copyright © 2016 Elsevier Ltd. All rights reserved.

Risk Management of NASA Projects

NASA Technical Reports Server (NTRS)

Sarper, Hueseyin

1997-01-01

Various NASA Langley Research Center and other center projects were attempted for analysis to obtain historical data comparing pre-phase A study and the final outcome for each project. This attempt, however, was abandoned once it became clear that very little documentation was available. Next, extensive literature search was conducted on the role of risk and reliability concepts in project management. Probabilistic risk assessment (PRA) techniques are being used with increasing regularity both in and outside of NASA. The value and the usage of PRA techniques were reviewed for large projects. It was found that both civilian and military branches of the space industry have traditionally refrained from using PRA, which was developed and expanded by nuclear industry. Although much has changed with the end of the cold war and the Challenger disaster, it was found that ingrained anti-PRA culture is hard to stop. Examples of skepticism against the use of risk management and assessment techniques were found both in the literature and in conversations with some technical staff. Program and project managers need to be convinced that the applicability and use of risk management and risk assessment techniques is much broader than just in the traditional safety-related areas of application. The time has come to begin to uniformly apply these techniques. The whole idea of risk-based system can maximize the 'return on investment' that the public demands. Also, it would be very useful if all project documents of NASA Langley Research Center, pre-phase A through final report, are carefully stored in a central repository preferably in electronic format.

The Risk-Informed Materials Management (RIMM) Tool System for Determining Safe-Levels of Contaminated Materials Managed on the Land

EPA Science Inventory

EPA’s Risk-Informed Materials Management (RIMM) tool system is a modeling approach that helps risk assessors evaluate the safety of managing raw, reused, or waste material streams via a variety of common scenarios (e.g., application to farms, use as a component in road cons...

Emotions at work: what is the link to patient and staff safety? Implications for nurse managers in the NHS.

PubMed

Smith, Pam; Pearson, Pauline H; Ross, Fiona

2009-03-01

This paper sets the discussion of emotions at work within the modern NHS and the current prioritisation of creating a safety culture within the service. The paper focuses on the work of students, frontline nurses and their managers drawing on recent studies of patient safety in the curriculum, and governance and incentives in the care of patients with complex long term conditions. The primary research featured in the paper combined a case study design with focus groups, interviews and observation. In the patient safety research the importance of physical and emotional safety emerged as a key finding both for users and professionals. In the governance and incentives research, risk emerged as a key concern for managers, frontline workers and users. The recognition of emotions and the importance of emotional labour at an individual and organizational level managed by emotionally intelligent leaders played an important role in promoting worker and patient safety and reducing workplace risk. Nurse managers need to be aware of the emotional complexities of their organizations in order to set up systems to support the emotional wellbeing of professionals and users which in turn ensures safety and reduces risk.

[Process management in the hospital pharmacy for the improvement of the patient safety].

PubMed

Govindarajan, R; Perelló-Juncá, A; Parès-Marimòn, R M; Serrais-Benavente, J; Ferrandez-Martí, D; Sala-Robinat, R; Camacho-Calvente, A; Campabanal-Prats, C; Solà-Anderiu, I; Sanchez-Caparrós, S; Gonzalez-Estrada, J; Martinez-Olalla, P; Colomer-Palomo, J; Perez-Mañosas, R; Rodríguez-Gallego, D

2013-01-01

To define a process management model for a hospital pharmacy in order to measure, analyse and make continuous improvements in patient safety and healthcare quality. In order to implement process management, Igualada Hospital was divided into different processes, one of which was the Hospital Pharmacy. A multidisciplinary management team was given responsibility for each process. For each sub-process one person was identified to be responsible, and a working group was formed under his/her leadership. With the help of each working group, a risk analysis using failure modes and effects analysis (FMEA) was performed, and the corresponding improvement actions were implemented. Sub-process indicators were also identified, and different process management mechanisms were introduced. The first risk analysis with FMEA produced more than thirty preventive actions to improve patient safety. Later, the weekly analysis of errors, as well as the monthly analysis of key process indicators, permitted us to monitor process results and, as each sub-process manager participated in these meetings, also to assume accountability and responsibility, thus consolidating the culture of excellence. The introduction of different process management mechanisms, with the participation of people responsible for each sub-process, introduces a participative management tool for the continuous improvement of patient safety and healthcare quality. Copyright © 2012 SECA. Published by Elsevier Espana. All rights reserved.

Predicting safety culture: the roles of employer, operations manager and safety professional.

PubMed

Wu, Tsung-Chih; Lin, Chia-Hung; Shiau, Sen-Yu

2010-10-01

This study explores predictive factors in safety culture. In 2008, a sample 939 employees was drawn from 22 departments of a telecoms firm in five regions in central Taiwan. The sample completed a questionnaire containing four scales: the employer safety leadership scale, the operations manager safety leadership scale, the safety professional safety leadership scale, and the safety culture scale. The sample was then randomly split into two subsamples. One subsample was used for measures development, one for the empirical study. A stepwise regression analysis found four factors with a significant impact on safety culture (R²=0.337): safety informing by operations managers; safety caring by employers; and safety coordination and safety regulation by safety professionals. Safety informing by operations managers (ß=0.213) was by far the most significant predictive factor. The findings of this study provide a framework for promoting a positive safety culture at the group level. Crown Copyright © 2010. Published by Elsevier Ltd. All rights reserved.

The influence of environmental conditions on safety management in hospitals: a qualitative study.

PubMed

Alingh, Carien W; van Wijngaarden, Jeroen D H; Huijsman, Robbert; Paauwe, Jaap

2018-05-02

approach is required. A strong focus on control-based management generates extrinsic motivation in employees but may, at the same time, undermine or even diminish intrinsic motivation to work on patient safety. Emphasising commitment-based management may, in contrast, strengthen intrinsic motivation but increases the risk of priorities being set elsewhere. Currently, external pressures frequently lead to the adoption of control-based management. A balanced approach requires a shift towards more trust-based safety demands.

Risk Management.

ERIC Educational Resources Information Center

Randal, L. Nathan

This chapter of "Principles of School Business Management" presents an overview of risk management for school districts. The chapter first discusses four fundamental elements of risk management: (1) identifying and measuring risks; (2) reducing or eliminating risks; (3) transferring unassumable risks; and (4) assuming remaining risks.…

Associations between safety climate and safety management practices in the construction industry.

PubMed

Marín, Luz S; Lipscomb, Hester; Cifuentes, Manuel; Punnett, Laura

2017-06-01

Safety climate, a group-level measure of workers' perceptions regarding management's safety priorities, has been suggested as a key predictor of safety outcomes. However, its relationship with actual injury rates is inconsistent. We posit that safety climate may instead be a parallel outcome of workplace safety practices, rather than a determinant of workers' safety behaviors or outcomes. Using a sample of 25 commercial construction companies in Colombia, selected by injury rate stratum (high, medium, low), we examined the relationship between workers' safety climate perceptions and safety management practices (SMPs) reported by safety officers. Workers' perceptions of safety climate were independent of their own company's implementation of SMPs, as measured here, and its injury rates. However, injury rates were negatively related to the implementation of SMPs. Safety management practices may be more important than workers' perceptions of safety climate as direct predictors of injury rates. © 2017 Wiley Periodicals, Inc.

Assessment of occupational safety risks in Floridian solid waste systems using Bayesian analysis.

PubMed

Bastani, Mehrad; Celik, Nurcin

2015-10-01

Safety risks embedded within solid waste management systems continue to be a significant issue and are prevalent at every step in the solid waste management process. To recognise and address these occupational hazards, it is necessary to discover the potential safety concerns that cause them, as well as their direct and/or indirect impacts on the different types of solid waste workers. In this research, our goal is to statistically assess occupational safety risks to solid waste workers in the state of Florida. Here, we first review the related standard industrial codes to major solid waste management methods including recycling, incineration, landfilling, and composting. Then, a quantitative assessment of major risks is conducted based on the data collected using a Bayesian data analysis and predictive methods. The risks estimated in this study for the period of 2005-2012 are then compared with historical statistics (1993-1997) from previous assessment studies. The results have shown that the injury rates among refuse collectors in both musculoskeletal and dermal injuries have decreased from 88 and 15 to 16 and three injuries per 1000 workers, respectively. However, a contrasting trend is observed for the injury rates among recycling workers, for whom musculoskeletal and dermal injuries have increased from 13 and four injuries to 14 and six injuries per 1000 workers, respectively. Lastly, a linear regression model has been proposed to identify major elements of the high number of musculoskeletal and dermal injuries. © The Author(s) 2015.

2015/2016 Quality Risk Management Benchmarking Survey.

PubMed

Waldron, Kelly; Ramnarine, Emma; Hartman, Jeffrey

2017-01-01

This paper investigates the concept of quality risk management (QRM) maturity as it applies to the pharmaceutical and biopharmaceutical industries, using the results and analysis from a QRM benchmarking survey conducted in 2015 and 2016. QRM maturity can be defined as the effectiveness and efficiency of a quality risk management program, moving beyond "check-the-box" compliance with guidelines such as ICH Q9 Quality Risk Management , to explore the value QRM brings to business and quality operations. While significant progress has been made towards full adoption of QRM principles and practices across industry, the full benefits of QRM have not yet been fully realized. The results of the QRM Benchmarking Survey indicate that the pharmaceutical and biopharmaceutical industries are approximately halfway along the journey towards full QRM maturity. LAY ABSTRACT: The management of risks associated with medicinal product quality and patient safety are an important focus for the pharmaceutical and biopharmaceutical industries. These risks are identified, analyzed, and controlled through a defined process called quality risk management (QRM), which seeks to protect the patient from potential quality-related risks. This paper summarizes the outcomes of a comprehensive survey of industry practitioners performed in 2015 and 2016 that aimed to benchmark the level of maturity with regard to the application of QRM. The survey results and subsequent analysis revealed that the pharmaceutical and biopharmaceutical industries have made significant progress in the management of quality risks over the last ten years, and they are roughly halfway towards reaching full maturity of QRM. © PDA, Inc. 2017.

Risk management in mental health: applying lessons from commercial aviation.

PubMed

Hatcher, Simon

2010-02-01

Risk management in mental health focuses on risks in patients and fails to predict rare but catastrophic events such as suicide. Commercial aviation has a similar task in preventing rare but catastrophic accidents. This article describes the systems in place in commercial aviation that allows that industry to prevent disasters and contrasts this with the situation in mental health. In mental health we should learn from commercial aviation by having: national policies to promote patient safety; a national body responsible for implementing this policy which maintains a database of safety occurrences, sets targets and investigates adverse outcomes; legislation in place which encourages clinicians to report safety occurrences; and a common method and language for investigating safety occurrences.

Risk management.

PubMed

Chambers, David W

2010-01-01

Every plan contains risk. To proceed without planning some means of managing that risk is to court failure. The basic logic of risk is explained. It consists in identifying a threshold where some corrective action is necessary, the probability of exceeding that threshold, and the attendant cost should the undesired outcome occur. This is the probable cost of failure. Various risk categories in dentistry are identified, including lack of liquidity; poor quality; equipment or procedure failures; employee slips; competitive environments; new regulations; unreliable suppliers, partners, and patients; and threats to one's reputation. It is prudent to make investments in risk management to the extent that the cost of managing the risk is less than the probable loss due to risk failure and when risk management strategies can be matched to type of risk. Four risk management strategies are discussed: insurance, reducing the probability of failure, reducing the costs of failure, and learning. A risk management accounting of the financial meltdown of October 2008 is provided.

[Risk and risk management in aviation].

PubMed

Müller, Manfred

2004-10-01

RISK MANAGEMENT: The large proportion of human errors in aviation accidents suggested the solution--at first sight brilliant--to replace the fallible human being by an "infallible" digitally-operating computer. However, even after the introduction of the so-called HITEC-airplanes, the factor human error still accounts for 75% of all accidents. Thus, if the computer is ruled out as the ultimate safety system, how else can complex operations involving quick and difficult decisions be controlled? OPTIMIZED TEAM INTERACTION/PARALLEL CONNECTION OF THOUGHT MACHINES: Since a single person is always "highly error-prone", support and control have to be guaranteed by a second person. The independent work of mind results in a safety network that more efficiently cushions human errors. NON-PUNITIVE ERROR MANAGEMENT: To be able to tackle the actual problems, the open discussion of intervened errors must not be endangered by the threat of punishment. It has been shown in the past that progress is primarily achieved by investigating and following up mistakes, failures and catastrophes shortly after they happened. HUMAN FACTOR RESEARCH PROJECT: A comprehensive survey showed the following result: By far the most frequent safety-critical situation (37.8% of all events) consists of the following combination of risk factors: 1. A complication develops. 2. In this situation of increased stress a human error occurs. 3. The negative effects of the error cannot be corrected or eased because there are deficiencies in team interaction on the flight deck. This means, for example, that a negative social climate has the effect of a "turbocharger" when a human error occurs. It needs to be pointed out that a negative social climate is not identical with a dispute. In many cases the working climate is burdened without the responsible person even noticing it: A first negative impression, too much or too little respect, contempt, misunderstandings, not expressing unclear concern, etc. can

An integrated and pragmatic approach: Global plant safety management

NASA Astrophysics Data System (ADS)

McNutt, Jack; Gross, Andrew

1989-05-01

The Bhopal disaster in India in 1984 has compelled manufacturing companies to review their operations in order to minimize their risk exposure. Much study has been done on the subject of risk assessment and in refining safety reviews of plant operations. However, little work has been done to address the broader needs of decision makers in the multinational environment. The corporate headquarters of multinational organizations are concerned with identifying vulnerable areas to assure that appropriate risk-minimization measures are in force or will be taken. But the task of screening global business units for safety prowess is complicated and time consuming. This article takes a step towards simplifying this process by presenting the decisional model developed by the authors. Beginning with an overview of key issues affecting global safety management, the focus shifts to the multinational vulnerability model developed by the authors, which reflects an integration of approaches. The article concludes with a discussion of areas for further research. While the global chemical industry and major incidents therein are used for illustration, the procedures and solutions suggested here are applicable to all manufacturing operations.

76 FR 14592 - Safety Management System; Withdrawal

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-17

...-06A] RIN 2120-AJ15 Safety Management System; Withdrawal AGENCY: Federal Aviation Administration (FAA... (``product/ service providers'') to develop a Safety Management System (SMS). The FAA is withdrawing the... management with a set of robust decision-making tools to use to improve safety. The FAA received 89 comments...

Risk Management

DTIC Science & Technology

2011-06-02

actively attack the risks, they will actively attack you.” -Tom Gib Why do Risk Management? 8 “The first step in the risk management process is to...opportunities to manage and improve our chances of success. - Roger Vanscoy “If you do not actively attack the risks, they will actively attack ...our risks provides opportunities to manage and improve our chances of success. - Roger Vanscoy “If you do not actively attack the risks, they will

Towards a Framework for Managing Risk Associated with Technology-Induced Error.

PubMed

Borycki, Elizabeth M; Kushniruk, Andre W

2017-01-01

Health information technologies (HIT) promised to streamline and modernize healthcare processes. However, a growing body of research has indicated that if such technologies are not designed, implemented or maintained properly this may lead to an increased incidence of new types of errors which the authors have referred to as "technology-induced errors". In this paper, framework is presented that can be used to manage HIT risk. The framework considers the reduction of technology-induced errors at different stages by managing risks associated with the implementation of HIT. Frameworks that allow health information technology managers to employ proactive and preventative approaches that can be used to manage the risks associated with technology-induced errors are critical to improving HIT safety and managing risk associated with implementing new technologies.

Safety in home care: A research protocol for studying medication management

PubMed Central

2010-01-01

Background Patient safety is an ongoing global priority, with medication safety considered a prevalent, high-risk area of concern. Yet, we have little understanding of the supports and barriers to safe medication management in the Canadian home care environment. There is a clear need to engage the providers and recipients of care in studying and improving medication safety with collaborative approaches to exploring the nature and safety of medication management in home care. Methods A socio-ecological perspective on health and health systems drives our iterative qualitative study on medication safety with elderly home care clients, family members and other informal caregivers, and home care providers. As we purposively sample across four Canadian provinces: Alberta (AB), Ontario (ON), Quebec (QC) and Nova Scotia (NS), we will collect textual and visual data through home-based interviews, participant-led photo walkabouts of the home, and photo elicitation sessions at clients' kitchen tables. Using successive rounds of interpretive description and human factors engineering analyses, we will generate robust descriptions of managing medication at home within each provincial sample and across the four-province group. We will validate our initial interpretations through photo elicitation focus groups with home care providers in each province to develop a refined description of the phenomenon that can inform future decision-making, quality improvement efforts, and research. Discussion The application of interpretive and human factors lenses to the visual and textual data is expected to yield findings that advance our understanding of the issues, challenges, and risk-mitigating strategies related to medication safety in home care. The images are powerful knowledge translation tools for sharing what we learn with participants, decision makers, other healthcare audiences, and the public. In addition, participants engage in knowledge exchange throughout the study with the use

A fuzzy model for assessing risk of occupational safety in the processing industry.

PubMed

Tadic, Danijela; Djapan, Marko; Misita, Mirjana; Stefanovic, Miladin; Milanovic, Dragan D

2012-01-01

Managing occupational safety in any kind of industry, especially in processing, is very important and complex. This paper develops a new method for occupational risk assessment in the presence of uncertainties. Uncertain values of hazardous factors and consequence frequencies are described with linguistic expressions defined by a safety management team. They are modeled with fuzzy sets. Consequence severities depend on current hazardous factors, and their values are calculated with the proposed procedure. The proposed model is tested with real-life data from fruit processing firms in Central Serbia.

Risk and risk management for Australian sex workers.

PubMed

Harris, Margaret; Nilan, Pam; Kirby, Emma

2011-03-01

In this article, we address the experiences of female sex workers in urban Australia through analysis of interviews using a feminist approach. Although many previous studies have been conducted, our focus was on the voices of sex workers in an area that was rapidly gentrifying, leading to local community tensions. Intensive analysis of interview transcripts was employed to derive thematic codes for understanding how the women viewed and managed everyday risk in sex work. They were well aware of the health risks associated with sex work. For women working on premises, domain separation between sex work and other life domains was an important management strategy for maintaining self-esteem. For women working on the street, instincts honed by years of dangerous work provided a measure of safety. Our findings have implications for health and other agencies dealing with sex workers in situations in which community pressure is exerted to move sex workers away from the area.

Navigating the fine line between benefit and risk in chronic atrial fibrillation: rationale and design of the Standard versus Atrial Fibrillation spEcific managemenT studY (SAFETY).

PubMed

Carrington, Melinda J; Ball, Jocasta; Horowitz, John D; Marwick, Thomas H; Mahadevan, Gnanadevan; Wong, Chiew; Abhayaratna, Walter P; Haluska, Brian; Thompson, David R; Scuffham, Paul A; Stewart, Simon

2013-06-20

Health outcomes associated with atrial fibrillation (AF) continue to be poor and standard management often does not provide clinical stability. The Standard versus Atrial Fibrillation spEcific managemenT studY (SAFETY) compares the efficacy of a post-discharge, nurse-led, multi-disciplinary programme to optimise AF management with usual care. SAFETY is a prospective, multi-centre, randomised controlled trial with blinded-endpoint adjudication. A target of 320 hospitalised patients with a chronic form of AF will be randomised (stratified by "rate" versus "rhythm" control) to usual post-discharge care or the SAFETY Intervention (SI). The SI involves home-based assessment, extensive clinical profiling and the application of optimal gold-standard pharmacology which is individually tailored according to a "traffic light" framework based on clinical stability, risk profile and therapeutic management. The primary endpoint is event-free survival from all-cause death or unplanned readmission during 18-36 months follow-up. Secondary endpoints include rate of recurrent hospital stay, treatment success (i.e. maintenance of rhythm or rate control and/or application of anti-thrombotic therapy without a bleeding event) and cost-efficacy. With study recruitment to be completed in early 2012, the results of this study will be available in early 2014. If positive, SAFETY will represent a potentially cost-effective and readily applicable strategy to improve health outcomes in high risk individuals discharged from hospital with chronic AF. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Database management systems for process safety.

PubMed

Early, William F

2006-03-17

Several elements of the process safety management regulation (PSM) require tracking and documentation of actions; process hazard analyses, management of change, process safety information, operating procedures, training, contractor safety programs, pre-startup safety reviews, incident investigations, emergency planning, and compliance audits. These elements can result in hundreds of actions annually that require actions. This tracking and documentation commonly is a failing identified in compliance audits, and is difficult to manage through action lists, spreadsheets, or other tools that are comfortably manipulated by plant personnel. This paper discusses the recent implementation of a database management system at a chemical plant and chronicles the improvements accomplished through the introduction of a customized system. The system as implemented modeled the normal plant workflows, and provided simple, recognizable user interfaces for ease of use.

Corporate financial decision makers' perceptions of their company's safety performance, programs and personnel: Do company size and industry injury risk matter?

PubMed

DeArmond, Sarah; Huang, Yueng-Hsiang; Chen, Peter Y; Courtney, Theodore K

2010-01-01

Top-level managers make important decisions about safety-related issues, yet little research has been done involving these individuals. The current study explored corporate financial decisions makers' perceptions of their company's safety and their justifications for these perceptions. This study also explored whether their perceptions and justifications varied as a function of company size or industry injury risk. A total of 404 individuals who were the most senior managers responsible for making decisions about property and casualty risk at their companies participated in this study. The participants took part in a telephone survey. The results suggest that corporate financial decision makers have positive views of safety at their companies relative to safety at other companies within their industries. Further, many believe their company's safety is influenced by the attention/emphasis placed on safety and the selection and training of safety personnel. Participants' perceptions varied somewhat based on the size of their company and the level of injury risk in their industry. While definitive conclusions about corporate financial decision makers' perceptions of safety cannot be reached as a result of this single study, this work does lay groundwork for future research aimed at better understanding the perceptions top-level managers.

Safety intelligence: an exploration of senior managers' characteristics.

PubMed

Fruhen, L S; Mearns, K J; Flin, R; Kirwan, B

2014-07-01

Senior managers can have a strong influence on organisational safety. But little is known about which of their personal attributes support their impact on safety. In this paper, we introduce the concept of 'safety intelligence' as related to senior managers' ability to develop and enact safety policies and explore possible characteristics related to it in two studies. Study 1 (N = 76) involved direct reports to chief executive officers (CEOs) of European air traffic management (ATM) organisations, who completed a short questionnaire asking about characteristics and behaviours that are ideal for a CEO's influence on safety. Study 2 involved senior ATM managers (N = 9) in various positions in interviews concerning their day-to-day work on safety. Both studies indicated six attributes of senior managers as relevant for their safety intelligence, particularly, social competence and safety knowledge, followed by motivation, problem-solving, personality and interpersonal leadership skills. These results have recently been applied in guidance for safety management practices in a White Paper published by EUROCONTROL. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Safety management as a foundation for evidence-based aeromedical standards and reporting of medical events.

PubMed

Evans, Anthony D; Watson, Dougal B; Evans, Sally A; Hastings, John; Singh, Jarnail; Thibeault, Claude

2009-06-01

The different interpretations by States (countries) of the aeromedical standards established by the International Civil Aviation Organization has resulted in a variety of approaches to the development of national aeromedical policy, and consequently a relative lack of harmonization. However, in many areas of aviation, safety management systems have been recently introduced and may represent a way forward. A safety management system can be defined as "A systematic approach to managing safety, including the necessary organizational structures, accountabilities, policies, and procedures" (1). There are four main areas where, by applying safety management principles, it may be possible to better use aeromedical data to enhance flight safety. These are: 1) adjustment of the periodicity and content of routine medical examinations to more accurately reflect aeromedical risk; 2) improvement in reporting and analysis of routine medical examination data; 3) improvement in reporting and analysis of in-flight medical events; and 4) support for improved reporting of relevant aeromedical events through the promotion of an appropriate culture by companies and regulatory authorities. This paper explores how the principles of safety management may be applied to aeromedical systems to improve their contribution to safety.

Diabetes management and hypoglycemia in safety sensitive jobs.

PubMed

Lee, See-Muah; Koh, David; Chui, Winnie Kl; Sum, Chee-Fang

2011-03-01

The majority of people diagnosed with diabetes mellitus are in the working age group in developing countries. The interrelationship of diabetes and work, that is, diabetes affecting work and work affecting diabetes, becomes an important issue for these people. Therapeutic options for the diabetic worker have been developed, and currently include various insulins, insulin sensitizers and secretagogues, incretin mimetics and enhancers, and alpha glucosidase inhibitors. Hypoglycemia and hypoglycaemic unawareness are important and unwanted treatment side effects. The risk they pose with respect to cognitive impairment can have safety implications. The understanding of the therapeutic options in the management of diabetic workers, blood glucose awareness training, and self-monitoring blood glucose will help to mitigate this risk. Employment decisions must also take into account the extent to which the jobs performed by the worker are safety sensitive. A risk assessment matrix, based on the extent to which a job is considered safety sensitive and based on the severity of the hypoglycaemia, may assist in determining one's fitness to work. Support at the workplace, such as a provision of healthy food options and arrangements for affected workers will be helpful for such workers. Arrangements include permission to carry and consume emergency sugar, flexible meal times, self-monitoring blood glucose when required, storage/disposal facilities for medicine such as insulin and needles, time off for medical appointments, and structured self-help programs.

Diabetes Management and Hypoglycemia in Safety Sensitive Jobs

PubMed Central

Koh, David; Chui, Winnie KL; Sum, Chee-Fang

2011-01-01

The majority of people diagnosed with diabetes mellitus are in the working age group in developing countries. The interrelationship of diabetes and work, that is, diabetes affecting work and work affecting diabetes, becomes an important issue for these people. Therapeutic options for the diabetic worker have been developed, and currently include various insulins, insulin sensitizers and secretagogues, incretin mimetics and enhancers, and alpha glucosidase inhibitors. Hypoglycemia and hypoglycaemic unawareness are important and unwanted treatment side effects. The risk they pose with respect to cognitive impairment can have safety implications. The understanding of the therapeutic options in the management of diabetic workers, blood glucose awareness training, and self-monitoring blood glucose will help to mitigate this risk. Employment decisions must also take into account the extent to which the jobs performed by the worker are safety sensitive. A risk assessment matrix, based on the extent to which a job is considered safety sensitive and based on the severity of the hypoglycaemia, may assist in determining one's fitness to work. Support at the workplace, such as a provision of healthy food options and arrangements for affected workers will be helpful for such workers. Arrangements include permission to carry and consume emergency sugar, flexible meal times, self-monitoring blood glucose when required, storage/disposal facilities for medicine such as insulin and needles, time off for medical appointments, and structured self-help programs. PMID:22953182

Improving Our Odds: Success through Continuous Risk Management

NASA Technical Reports Server (NTRS)

Greenhalgh, Phillip O.

2009-01-01

Launching a rocket, running a business, driving to work and even day-to-day living all involve some degree of risk. Risk is ever present yet not always recognized, adequately assessed and appropriately mitigated. Identification, assessment and mitigation of risk are elements of the risk management component of the "continuous improvement" way of life that has become a hallmark of successful and progressive enterprises. While the application of risk management techniques to provide continuous improvement may be detailed and extensive, the philosophy, ideals and tools can be beneficially applied to all situations. Experiences with the use of risk identification, assessment and mitigation techniques for complex systems and processes are described. System safety efforts and tools used to examine potential risks of the Ares I First Stage of NASA s new Constellation Crew Launch Vehicle (CLV) presently being designed are noted as examples. Recommendations from lessons learned are provided for the application of risk management during the development of new systems as well as for the improvement of existing systems. Lessons learned and suggestions given are also examined for applicability to simple systems, uncomplicated processes and routine personal daily tasks. This paper informs the reader of varied uses of risk management efforts and techniques to identify, assess and mitigate risk for improvement of products, success of business, protection of people and enhancement of personal life.

SafetyAnalyst : software tools for safety management of specific highway sites

DOT National Transportation Integrated Search

2010-07-01

SafetyAnalyst provides a set of software tools for use by state and local highway agencies for highway safety management. SafetyAnalyst can be used by highway agencies to improve their programming of site-specific highway safety improvements. SafetyA...

Software Safety Risk in Legacy Safety-Critical Computer Systems

NASA Technical Reports Server (NTRS)

Hill, Janice L.; Baggs, Rhoda

2007-01-01

Safety Standards contain technical and process-oriented safety requirements. Technical requirements are those such as "must work" and "must not work" functions in the system. Process-Oriented requirements are software engineering and safety management process requirements. Address the system perspective and some cover just software in the system > NASA-STD-8719.13B Software Safety Standard is the current standard of interest. NASA programs/projects will have their own set of safety requirements derived from the standard. Safety Cases: a) Documented demonstration that a system complies with the specified safety requirements. b) Evidence is gathered on the integrity of the system and put forward as an argued case. [Gardener (ed.)] c) Problems occur when trying to meet safety standards, and thus make retrospective safety cases, in legacy safety-critical computer systems.

Dams and Levees: Safety Risks

NASA Astrophysics Data System (ADS)

Carter, N. T.

2017-12-01

The nation's flood risk is increasing. The condition of U.S. dams and levees contributes to that risk. Dams and levee owners are responsible for the safety, maintenance, and rehabilitation of their facilities. Dams-Of the more than 90,000 dams in the United States, about 4% are federally owned and operated; 96% are owned by state and local governments, public utilities, or private companies. States regulate dams that are not federally owned. The number of high-hazard dams (i.e., dams whose failure would likely result in the loss of human life) has increased in the past decade. Roughly 1,780 state-regulated, high-hazard facilities with structural ratings of poor or unsatisfactory need rehabilitation. Levees-There are approximately 100,000 miles of levees in the nation; most levees are owned and maintained by municipalities and agricultural districts. Few states have levee safety programs. The U.S. Army Corps of Engineers (Corps) inspects 15,000 miles of levees, including levees that it owns and local levees participating in a federal program to assist with certain post-flood repairs. Information is limited on how regularly other levees are inspected. The consequence of a breach or failure is another aspect of risk. State and local governments have significant authority over land use and development, which can shape the social and economic impacts of a breach or failure; they also lead on emergency planning and related outreach. To date, federal dam and levee safety efforts have consisted primarily of (1) support for state dam safety standards and programs, (2) investments at federally owned dams and levees, and (3) since 2007, creation of a national levee database and enhanced efforts and procedures for Corps levee inspections and assessments. In Public Law 113-121, enacted in 2014, Congress (1) directed the Corps to develop voluntary guidelines for levee safety and an associated hazard potential classification system for levees, and (2) authorized support for the

Using Risk Assessment Methodologies to Meet Management Objectives

NASA Technical Reports Server (NTRS)

DeMott, D. L.

2015-01-01

Corporate and program objectives focus on desired performance and results. ?Management decisions that affect how to meet these objectives now involve a complex mix of: technology, safety issues, operations, process considerations, employee considerations, regulatory requirements, financial concerns and legal issues. ?Risk Assessments are a tool for decision makers to understand potential consequences and be in a position to reduce, mitigate or eliminate costly mistakes or catastrophic failures. Using a risk assessment methodology is only a starting point. ?A risk assessment program provides management with important input in the decision making process. ?A pro-active organization looks to the future to avoid problems, a reactive organization can be blindsided by risks that could have been avoided. ?You get out what you put in, how useful your program is will be up to the individual organization.

Country differences of psychosocial working conditions in Europe: the role of health and safety management practices.

PubMed

Lunau, Thorsten; Dragano, Nico; Siegrist, Johannes; Wahrendorf, Morten

2017-10-01

In times of demographic change, maintaining health and employability of older employees is important. In this context, studies show that stressful working conditions differ by countries. Yet, it is unclear if specific national management practices to deal with these conditions contribute towards explaining country differences. This study combines two different data sources. The first one provides detailed information on psychosocial working conditions in 17 European countries, based on 12,284 employees from the Survey of Health, Ageing and Retirement in Europe (SHARE) and the English Longitudinal Study of Ageing (ELSA). We link this information to the second data source that provides information on health and safety management practices in each of the countries under study (collected among 17,477 managers at the level of companies in the Enterprise survey on new and emerging risks (ESENER)). We distinguish six different types of risk management procedures in the analysis. Results show that levels of psychosocial risks are generally lower in countries with more developed management practices, in particular if national management practices are marked by (1) procedures to deal with work stress, (2) information about whom to address in case of work-related psychosocial problems, and (3) health and safety services provided by psychologists. The findings underline the importance of a comprehensive psychosocial risk management approach in reducing work-related stress, as lower levels of psychosocial risks are linked to specific psychosocial risk management practices within companies, in particular those pointing to clear responsibilities and coordinated procedures in dealing with psychosocial risks.

Project Risk Management

NASA Technical Reports Server (NTRS)

Jr., R. F. Miles

1995-01-01

Project risk management is primarily concerned with performance, reliability, cost, and schedule. Environmental risk management is primarily concerned with human health and ecological hazards and likelihoods. This paper discusses project risk management and compares it to environmental risk management, both with respect to goals and implementation. The approach of the Jet Propulsion Laboratory to risk management is presented as an example of a project risk management approach that is an extension to NASA NHB 7120.5: Management of Major System Programs and Projects.

Occupational health and safety: Designing and building with MACBETH a value risk-matrix for evaluating health and safety risks

NASA Astrophysics Data System (ADS)

Lopes, D. F.; Oliveira, M. D.; Costa, C. A. Bana e.

2015-05-01

Risk matrices (RMs) are commonly used to evaluate health and safety risks. Nonetheless, they violate some theoretical principles that compromise their feasibility and use. This study describes how multiple criteria decision analysis methods have been used to improve the design and the deployment of RMs to evaluate health and safety risks at the Occupational Health and Safety Unit (OHSU) of the Regional Health Administration of Lisbon and Tagus Valley. ‘Value risk-matrices’ (VRMs) are built with the MACBETH approach in four modelling steps: a) structuring risk impacts, involving the construction of descriptors of impact that link risk events with health impacts and are informed by scientific evidence; b) generating a value measurement scale of risk impacts, by applying the MACBETH-Choquet procedure; c) building a system for eliciting subjective probabilities that makes use of a numerical probability scale that was constructed with MACBETH qualitative judgments on likelihood; d) and defining a classification colouring scheme for the VRM. A VRM built with OHSU members was implemented in a decision support system which will be used by OHSU members to evaluate health and safety risks and to identify risk mitigation actions.

Applicability of risk-based management and the need for risk-based economic decision analysis at hazardous waste contaminated sites.

PubMed

Khadam, Ibrahim; Kaluarachchi, Jagath J

2003-07-01

Decision analysis in subsurface contamination management is generally carried out through a traditional engineering economic viewpoint. However, new advances in human health risk assessment, namely, the probabilistic risk assessment, and the growing awareness of the importance of soft data in the decision-making process, require decision analysis methodologies that are capable of accommodating non-technical and politically biased qualitative information. In this work, we discuss the major limitations of the currently practiced decision analysis framework, which evolves around the definition of risk and cost of risk, and its poor ability to communicate risk-related information. A demonstration using a numerical example was conducted to provide insight on these limitations of the current decision analysis framework. The results from this simple ground water contamination and remediation scenario were identical to those obtained from studies carried out on existing Superfund sites, which suggests serious flaws in the current risk management framework. In order to provide a perspective on how these limitations may be avoided in future formulation of the management framework, more matured and well-accepted approaches to decision analysis in dam safety and the utility industry, where public health and public investment are of great concern, are presented and their applicability in subsurface remediation management is discussed. Finally, in light of the success of the application of risk-based decision analysis in dam safety and the utility industry, potential options for decision analysis in subsurface contamination management are discussed.

Exploiting Science: Enhancing the Safety Training of Pilots to Reduce the Risk of Bird Strikes

NASA Astrophysics Data System (ADS)

Mendonca, Flavio A. C.

Analysis of bird strikes to aviation in the U.S. from 1990 to 2015 indicate that the successful mitigation efforts at airports, which must be sustained, have reduced incidents with damage and a negative effect-on-flight since 2000. However, such efforts have done little to reduce strikes outside the airport jurisdiction, such as occurred with US Airways Flight 1549 in 2009. There are basically three strategies to mitigate the risk of bird strikes: standards set by aviation authorities, technology, and actions by crewmembers. Pilots play an important role as stakeholders in the prevention of bird strikes, especially outside the airport environment. Thus, safety efforts require enhanced risk management and aeronautical decision-making training for flight crews. The purpose of this study was to determine if a safety training protocol could effectively enhance CFR Part 141 general aviation pilots' knowledge and skills to reduce the risk of bird strikes to aviation. Participants were recruited from the Purdue University professional flight program and from Purdue Aviation. The researcher of this study used a pretest posttest experimental design. Additionally, qualitative data were collected through open-ended questions in the pretest, posttest, and a follow-up survey questionnaire. The participants' pretest and posttest scores were analyzed using parametric and nonparametric tests. Results indicated a significant increase in the posttest scores of the experimental group. An investigation of qualitative data showed that the topic "safety management of bird hazards by pilots" is barely covered during the ground and flight training of pilots. Furthermore, qualitative data suggest a misperception of the safety culture tenets and a poor familiarity with the safety risk management process regarding bird hazards. Finally, the researcher presented recommendations for practice and future research.

Adoption of Building Information Modelling in project planning risk management

NASA Astrophysics Data System (ADS)

Mering, M. M.; Aminudin, E.; Chai, C. S.; Zakaria, R.; Tan, C. S.; Lee, Y. Y.; Redzuan, A. A.

2017-11-01

An efficient and effective risk management required a systematic and proper methodology besides knowledge and experience. However, if the risk management is not discussed from the starting of the project, this duty is notably complicated and no longer efficient. This paper presents the adoption of Building Information Modelling (BIM) in project planning risk management. The objectives is to identify the traditional risk management practices and its function, besides, determine the best function of BIM in risk management and investigating the efficiency of adopting BIM-based risk management during the project planning phase. In order to obtain data, a quantitative approach is adopted in this research. Based on data analysis, the lack of compliance with project requirements and failure to recognise risk and develop responses to opportunity are the risks occurred when traditional risk management is implemented. When using BIM in project planning, it works as the tracking of cost control and cash flow give impact on the project cycle to be completed on time. 5D cost estimation or cash flow modeling benefit risk management in planning, controlling and managing budget and cost reasonably. There were two factors that mostly benefit a BIM-based technology which were formwork plan with integrated fall plan and design for safety model check. By adopting risk management, potential risks linked with a project and acknowledging to those risks can be identified to reduce them to an acceptable extent. This means recognizing potential risks and avoiding threat by reducing their negative effects. The BIM-based risk management can enhance the planning process of construction projects. It benefits the construction players in various aspects. It is important to know the application of BIM-based risk management as it can be a lesson learnt to others to implement BIM and increase the quality of the project.

Crew fatigue safety performance indicators for fatigue risk management systems.

PubMed

Gander, Philippa H; Mangie, Jim; Van Den Berg, Margo J; Smith, A Alexander T; Mulrine, Hannah M; Signal, T Leigh

2014-02-01

Implementation of Fatigue Risk Management Systems (FRMS) is gaining momentum; however, agreed safety performance indicators (SPIs) are lacking. This paper proposes an initial set of SPIs based on measures of crewmember sleep, performance, and subjective fatigue and sleepiness, together with methods for interpreting them. Data were included from 133 landing crewmembers on 2 long-range and 3 ultra-long-range trips (4-person crews, 3 airlines, 220 flights). Studies had airline, labor, and regulatory support, and underwent independent ethical review. SPIs evaluated preflight and at top of descent (TOD) were: total sleep in the prior 24 h and time awake at duty start and at TOD (actigraphy); subjective sleepiness (Karolinska Sleepiness Scale) and fatigue (Samn-Perelli scale); and psychomotor vigilance task (PVT) performance. Kruskal-Wallis nonparametric ANOVA with post hoc tests was used to identify significant differences between flights for each SPI. Visual and preliminary quantitative comparisons of SPIs between flights were made using box plots and bar graphs. Statistical analyses identified significant differences between flights across a range of SPls. In an FRMS, crew fatigue SPIs are envisaged as a decision aid alongside operational SPIs, which need to reflect the relevant causes of fatigue in different operations. We advocate comparing multiple SPIs between flights rather than defining safe/unsafe thresholds on individual SPIs. More comprehensive data sets are needed to identify the operational and biological factors contributing to the differences between flights reported here. Global sharing of an agreed core set of SPIs would greatly facilitate implementation and improvement of FRMS.

Review of qualitative approaches for the construction industry: designing a risk management toolbox.

PubMed

Zalk, David M; Spee, Ton; Gillen, Matt; Lentz, Thomas J; Garrod, Andrew; Evans, Paul; Swuste, Paul

2011-06-01

This paper presents the framework and protocol design for a construction industry risk management toolbox. The construction industry needs a comprehensive, systematic approach to assess and control occupational risks. These risks span several professional health and safety disciplines, emphasized by multiple international occupational research agenda projects including: falls, electrocution, noise, silica, welding fumes, and musculoskeletal disorders. Yet, the International Social Security Association says, "whereas progress has been made in safety and health, the construction industry is still a high risk sector." Small- and medium-sized enterprises (SMEs) employ about 80% of the world's construction workers. In recent years a strategy for qualitative occupational risk management, known as Control Banding (CB) has gained international attention as a simplified approach for reducing work-related risks. CB groups hazards into stratified risk 'bands', identifying commensurate controls to reduce the level of risk and promote worker health and safety. We review these qualitative solutions-based approaches and identify strengths and weaknesses toward designing a simplified CB 'toolbox' approach for use by SMEs in construction trades. This toolbox design proposal includes international input on multidisciplinary approaches for performing a qualitative risk assessment determining a risk 'band' for a given project. Risk bands are used to identify the appropriate level of training to oversee construction work, leading to commensurate and appropriate control methods to perform the work safely. The Construction Toolbox presents a review-generated format to harness multiple solutions-based national programs and publications for controlling construction-related risks with simplified approaches across the occupational safety, health and hygiene professions.

Review of Qualitative Approaches for the Construction Industry: Designing a Risk Management Toolbox

PubMed Central

Spee, Ton; Gillen, Matt; Lentz, Thomas J.; Garrod, Andrew; Evans, Paul; Swuste, Paul

2011-01-01

Objectives This paper presents the framework and protocol design for a construction industry risk management toolbox. The construction industry needs a comprehensive, systematic approach to assess and control occupational risks. These risks span several professional health and safety disciplines, emphasized by multiple international occupational research agenda projects including: falls, electrocution, noise, silica, welding fumes, and musculoskeletal disorders. Yet, the International Social Security Association says, "whereas progress has been made in safety and health, the construction industry is still a high risk sector." Methods Small- and medium-sized enterprises (SMEs) employ about 80% of the world's construction workers. In recent years a strategy for qualitative occupational risk management, known as Control Banding (CB) has gained international attention as a simplified approach for reducing work-related risks. CB groups hazards into stratified risk 'bands', identifying commensurate controls to reduce the level of risk and promote worker health and safety. We review these qualitative solutions-based approaches and identify strengths and weaknesses toward designing a simplified CB 'toolbox' approach for use by SMEs in construction trades. Results This toolbox design proposal includes international input on multidisciplinary approaches for performing a qualitative risk assessment determining a risk 'band' for a given project. Risk bands are used to identify the appropriate level of training to oversee construction work, leading to commensurate and appropriate control methods to perform the work safely. Conclusion The Construction Toolbox presents a review-generated format to harness multiple solutions-based national programs and publications for controlling construction-related risks with simplified approaches across the occupational safety, health and hygiene professions. PMID:22953194

Deploying and measuring a risk and patient safety program.

PubMed

Orel, Howard; McGroarty, Molly; Marchegiani, Heather

2017-01-01

Health care continues to evolve at a rapid rate. Over just the past decade, the industry has seen the introduction and widespread implementation of an electronic health record, increase in presence of nurse practitioners and physician assistants to help manage the shortage of physicians, and the introduction of accountable care organizations. It is with these changes that new challenges and opportunities emerge. One such challenge is the increase in the severity of medical malpractice claims throughout the nation. Another emerging challenge is the introduction of outcome-based reimbursements, with providers potentially losing a portion of their payment should the patient experience result in a preventable adverse event. These trends are resulting in providers continuously seeking innovative approaches to reducing risk and improving patient safety. © 2017 American Society for Healthcare Risk Management of the American Hospital Association.

Risk-Based Approach for Microbiological Food Safety Management in the Dairy Industry: The Case of Listeria monocytogenes in Soft Cheese Made from Pasteurized Milk.

PubMed

Tenenhaus-Aziza, Fanny; Daudin, Jean-Jacques; Maffre, Alexandre; Sanaa, Moez

2014-01-01

According to Codex Alimentarius Commission recommendations, management options applied at the process production level should be based on good hygiene practices, HACCP system, and new risk management metrics such as the food safety objective. To follow this last recommendation, the use of quantitative microbiological risk assessment is an appealing approach to link new risk-based metrics to management options that may be applied by food operators. Through a specific case study, Listeria monocytogenes in soft cheese made from pasteurized milk, the objective of the present article is to practically show how quantitative risk assessment could be used to direct potential intervention strategies at different food processing steps. Based on many assumptions, the model developed estimates the risk of listeriosis at the moment of consumption taking into account the entire manufacturing process and potential sources of contamination. From pasteurization to consumption, the amplification of a primo-contamination event of the milk, the fresh cheese or the process environment is simulated, over time, space, and between products, accounting for the impact of management options, such as hygienic operations and sampling plans. A sensitivity analysis of the model will help orientating data to be collected prioritarily for the improvement and the validation of the model. What-if scenarios were simulated and allowed for the identification of major parameters contributing to the risk of listeriosis and the optimization of preventive and corrective measures. © 2013 Society for Risk Analysis.

L-Band Digital Aeronautical Communications System Engineering - Initial Safety and Security Risk Assessment and Mitigation

NASA Technical Reports Server (NTRS)

Zelkin, Natalie; Henriksen, Stephen

2011-01-01

This document is being provided as part of ITT's NASA Glenn Research Center Aerospace Communication Systems Technical Support (ACSTS) contract NNC05CA85C, Task 7: "New ATM Requirements--Future Communications, C-Band and L-Band Communications Standard Development." ITT has completed a safety hazard analysis providing a preliminary safety assessment for the proposed L-band (960 to 1164 MHz) terrestrial en route communications system. The assessment was performed following the guidelines outlined in the Federal Aviation Administration Safety Risk Management Guidance for System Acquisitions document. The safety analysis did not identify any hazards with an unacceptable risk, though a number of hazards with a medium risk were documented. This effort represents a preliminary safety hazard analysis and notes the triggers for risk reassessment. A detailed safety hazards analysis is recommended as a follow-on activity to assess particular components of the L-band communication system after the technology is chosen and system rollout timing is determined. The security risk analysis resulted in identifying main security threats to the proposed system as well as noting additional threats recommended for a future security analysis conducted at a later stage in the system development process. The document discusses various security controls, including those suggested in the COCR Version 2.0.

Risk-based Spacecraft Fire Safety Experiments

NASA Technical Reports Server (NTRS)

Apostolakis, G.; Catton, I.; Issacci, F.; Paulos, T.; Jones, S.; Paxton, K.; Paul, M.

1992-01-01

Viewgraphs on risk-based spacecraft fire safety experiments are presented. Spacecraft fire risk can never be reduced to a zero probability. Probabilistic risk assessment is a tool to reduce risk to an acceptable level.

Safety analysis, risk assessment, and risk acceptance criteria

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jamali, K.; Stack, D.W.; Sullivan, L.H.

1997-08-01

This paper discusses a number of topics that relate safety analysis as documented in the Department of Energy (DOE) safety analysis reports (SARs), probabilistic risk assessments (PRA) as characterized primarily in the context of the techniques that have assumed some level of formality in commercial nuclear power plant applications, and risk acceptance criteria as an outgrowth of PRA applications. DOE SARs of interest are those that are prepared for DOE facilities under DOE Order 5480.23 and the implementing guidance in DOE STD-3009-94. It must be noted that the primary area of application for DOE STD-3009 is existing DOE facilities andmore » that certain modifications of the STD-3009 approach are necessary in SARs for new facilities. Moreover, it is the hazard analysis (HA) and accident analysis (AA) portions of these SARs that are relevant to the present discussions. Although PRAs can be qualitative in nature, PRA as used in this paper refers more generally to all quantitative risk assessments and their underlying methods. HA as used in this paper refers more generally to all qualitative risk assessments and their underlying methods that have been in use in hazardous facilities other than nuclear power plants. This discussion includes both quantitative and qualitative risk assessment methods. PRA has been used, improved, developed, and refined since the Reactor Safety Study (WASH-1400) was published in 1975 by the Nuclear Regulatory Commission (NRC). Much debate has ensued since WASH-1400 on exactly what the role of PRA should be in plant design, reactor licensing, `ensuring` plant and process safety, and a large number of other decisions that must be made for potentially hazardous activities. Of particular interest in this area is whether the risks quantified using PRA should be compared with numerical risk acceptance criteria (RACs) to determine whether a facility is `safe.` Use of RACs requires quantitative estimates of consequence frequency and magnitude.« less

The Drug Safety and Risk Management Advisory Committee: a case study of meeting frequency, content, and outcomes before and after FDAAA.

PubMed

Morrato, Elaine H; Ling, Sarah B

2012-11-01

The Food and Drug Administration Amendments Act (FDAAA) of 2007 granted FDA-expanded drug safety authority. We hypothesized that meetings involving the FDA Drug Safety and Risk Management (DSaRM) Advisory Committee might serve as a barometer for the impact of FDAAA on drug safety regulatory decision making. We conducted a case study analysis of 42 DSaRM advisory committee meetings held between 2002 and 2011. Publicly available sources (FDA meeting minutes and materials, safety alerts, and drug manufacturer Web sites) were reviewed to describe and compare DSaRM meeting frequency, content and outcomes between the pre-FDAAA (2002-2007) and post-FDAAA (2008-2011) periods. DSaRM meeting frequency increased after FDAAA (from 2.7 to 6.5 meetings per year). DSaRM meetings were more likely to be held jointly with other drug advisory committees after FDAAA (from 68% to 92% of meetings). DSaRM members were invited participants in 35 additional meetings of other drug advisory committees (2007-2011). DSaRM meetings were more likely to review issues of approvability (eg, new drugs, new indications, and new product formulations) after FDAAA. FDA questions to the committee were more likely to request an explicit drug safety assessment after FDAAA (from 31% to 76% of meetings). Content analysis of meeting outcomes and subsequent FDA regulatory decisions did not suggest a more or less risk aversive climate after FDAAA. Increased DSaRM advisory committee activity indicates its advice was being sought more broadly for drug regulatory decision making and at earlier stages of drug development after FDAAA was enacted.

Managing Safety and Operations: The Effect of Joint Management System Practices on Safety and Operational Outcomes.

PubMed

Tompa, Emile; Robson, Lynda; Sarnocinska-Hart, Anna; Klassen, Robert; Shevchenko, Anton; Sharma, Sharvani; Hogg-Johnson, Sheilah; Amick, Benjamin C; Johnston, David A; Veltri, Anthony; Pagell, Mark

2016-03-01

The aim of this study was to determine whether management system practices directed at both occupational health and safety (OHS) and operations (joint management system [JMS] practices) result in better outcomes in both areas than in alternative practices. Separate regressions were estimated for OHS and operational outcomes using data from a survey along with administrative records on injuries and illnesses. Organizations with JMS practices had better operational and safety outcomes than organizations without these practices. They had similar OHS outcomes as those with operations-weak practices, and in some cases, better outcomes than organizations with safety-weak practices. They had similar operational outcomes as those with safety-weak practices, and better outcomes than those with operations-weak practices. Safety and operations appear complementary in organizations with JMS practices in that there is no penalty for either safety or operational outcomes.

Restaurant manager and worker food safety certification and knowledge.

PubMed

Brown, Laura G; Le, Brenda; Wong, Melissa R; Reimann, David; Nicholas, David; Faw, Brenda; Davis, Ernestine; Selman, Carol A

2014-11-01

Over half of foodborne illness outbreaks occur in restaurants. To combat these outbreaks, many public health agencies require food safety certification for restaurant managers, and sometimes workers. Certification entails passing a food safety knowledge examination, which is typically preceded by food safety training. Current certification efforts are based on the assumption that certification leads to greater food safety knowledge. The Centers for Disease Control and Prevention conducted this study to examine the relationship between food safety knowledge and certification. We also examined the relationships between food safety knowledge and restaurant, manager, and worker characteristics. We interviewed managers (N=387) and workers (N=365) about their characteristics and assessed their food safety knowledge. Analyses showed that certified managers and workers had greater food safety knowledge than noncertified managers and workers. Additionally, managers and workers whose primary language was English had greater food safety knowledge than those whose primary language was not English. Other factors associated with greater food safety knowledge included working in a chain restaurant, working in a larger restaurant, having more experience, and having more duties. These findings indicate that certification improves food safety knowledge, and that complex relationships exist among restaurant, manager, and worker characteristics and food safety knowledge.

Restaurant Manager and Worker Food Safety Certification and Knowledge

PubMed Central

Brown, Laura G.; Le, Brenda; Wong, Melissa R.; Reimann, David; Nicholas, David; Faw, Brenda; Davis, Ernestine; Selman, Carol A.

2017-01-01

Over half of foodborne illness outbreaks occur in restaurants. To combat these outbreaks, many public health agencies require food safety certification for restaurant managers, and sometimes workers. Certification entails passing a food safety knowledge examination, which is typically preceded by food safety training. Current certification efforts are based on the assumption that certification leads to greater food safety knowledge. The Centers for Disease Control and Prevention conducted this study to examine the relationship between food safety knowledge and certification. We also examined the relationships between food safety knowledge and restaurant, manager, and worker characteristics. We interviewed managers (N = 387) and workers (N = 365) about their characteristics and assessed their food safety knowledge. Analyses showed that certified managers and workers had greater food safety knowledge than noncertified managers and workers. Additionally, managers and workers whose primary language was English had greater food safety knowledge than those whose primary language was not English. Other factors associated with greater food safety knowledge included working in a chain restaurant, working in a larger restaurant, having more experience, and having more duties. These findings indicate that certification improves food safety knowledge, and that complex relationships exist among restaurant, manager, and worker characteristics and food safety knowledge. PMID:25361386

Risk management frameworks for human health and environmental risks.

PubMed

Jardine, Cindy; Hrudey, Steve; Shortreed, John; Craig, Lorraine; Krewski, Daniel; Furgal, Chris; McColl, Stephen

2003-01-01

A comprehensive analytical review of the risk assessment, risk management, and risk communication approaches currently being undertaken by key national, provincial/state, territorial, and international agencies was conducted. The information acquired for review was used to identify the differences, commonalities, strengths, and weaknesses among the various approaches, and to identify elements that should be included in an effective, current, and comprehensive approach applicable to environmental, human health and occupational health risks. More than 80 agencies, organizations, and advisory councils, encompassing more than 100 risk documents, were examined during the period from February 2000 until November 2002. An overview was made of the most important general frameworks for risk assessment, risk management, and risk communication for human health and ecological risk, and for occupational health risk. In addition, frameworks for specific applications were reviewed and summarized, including those for (1)contaminated sites; (2) northern contaminants; (3) priority substances; (4) standards development; (5) food safety; (6) medical devices; (7) prescription drug use; (8) emergency response; (9) transportation; (10) risk communication. Twelve frameworks were selected for more extensive review on the basis of representation of the areas of human health, ecological, and occupational health risk; relevance to Canadian risk management needs; representation of comprehensive and well-defined approaches; generalizability with their risk areas; representation of "state of the art" in Canada, the United States, and/or internationally; and extent of usage of potential usage within Canada. These 12 frameworks were: 1. Framework for Environmental Health Risk Management (US Presidential/Congressional Commission on Risk Assessment and Risk Management, 1997). 2. Health Risk Determination: The Challenge of Health Protection (Health and Welfare Canada, 1990). 3. Health Canada Decision

[Management, quality of health and occupational safety and hospital organization: is integration possible?].

PubMed

Corrao, Carmela Romana Natalina

2011-01-01

The evolution of the national and European legislation has progressively transformed the working environments into organized environments. Specific models for its management are being proposed, which should be integrated into general management strategies. In the case of hospitals this integration should consider the peculiar organizational complexity, where the management of the occupational risk needs to be integrated with clinical risk management and economic risk management. Resources management should also consider that Occupational Medicine has not a direct monetary benefit for the organisation, but only indirect health consequences in terms of reduction of accidents and occupational diseases. The deep and simultaneous analysis of the current general management systems and the current management methods of occupational safety and health protection allows one to hyphotesise a possible integration between them. For both of them the Top Management is the main responsible of the quality management strategies and the use of specific documents in the managerial process, such as the document of risks evaluation in the occupational management and the quality manual in the general management, is of paramount importance. An integrated management has also the scope to pursue a particular kind of quality management, where ethics and job satisfaction are innovative, as established by recent European guidelines, management systems and national legislations.

Reducing safety risk among underserved caregivers with an Alzheimer's home safety program.

PubMed

Levy-Storms, Lené; Cherry, Debra L; Lee, Linda J; Wolf, Sheldon M

2017-09-01

Older adults living with Alzheimer's disease (AD) experience more of the types of accidents and injuries prevalent among older adults. Relatively few studies specifically on safety risks have included older adults of color and tested interventions. This pilot study tested the feasibility and evaluability of educating Hispanic and African American caregivers of patients living with AD about reducing safety risks in their homes. This outpatient memory clinic-based intervention study included a pre-/post-test survey design with two nonequivalent groups and predominately serves Hispanic and African Americans. Of 60 eligible caregivers, 67% participated in a tailored, safety training class with an optional follow-up call. The results indicate a reduction in some safety risks compared to baseline and/or a no intervention group, respectively, including leaving patients at home alone part-time (p < .01 and p < .01), getting lost (p < .05 and p < .05), going outdoors alone less often (p < .05 and p < .01), and giving themselves medicine (p < .05 and p < .01). At post-test, 47 clinically significant instances occurred, in which caregivers who participated in the intervention self-reported patients living with AD to be 'completely safe' in one or more of the safety risk items compared to 8 instances among those who did not. This pilot pre/post design with non-equivalent groups study needs refinement in a future randomized control trial. Despite limitations, this pilot study demonstrates the first feasible and evaluable intervention with both statistically and clinically significant results that suggest potential for reducing safety risks among at-risk minority patients living with AD in future research.

NASA Safety Manual. Volume 3: System Safety

NASA Technical Reports Server (NTRS)

1970-01-01

This Volume 3 of the NASA Safety Manual sets forth the basic elements and techniques for managing a system safety program and the technical methods recommended for use in developing a risk evaluation program that is oriented to the identification of hazards in aerospace hardware systems and the development of residual risk management information for the program manager that is based on the hazards identified. The methods and techniques described in this volume are in consonance with the requirements set forth in NHB 1700.1 (VI), Chapter 3. This volume and future volumes of the NASA Safety Manual shall not be rewritten, reprinted, or reproduced in any manner. Installation implementing procedures, if necessary, shall be inserted as page supplements in accordance with the provisions of Appendix A. No portion of this volume or future volumes of the NASA Safety Manual shall be invoked in contracts.

46 CFR 107.415 - Safety Management Certificate.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Safety Management Certificate. 107.415 Section 107.415 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Certificates Under International Convention for Safety of Life at Sea, 1974 § 107.415 Safety Management Certificate. (a)...

Expert Views on Regulatory Preparedness for Managing the Risks of Nanotechnologies

PubMed Central

Beaudrie, Christian E. H.; Satterfield, Terre; Kandlikar, Milind; Harthorn, Barbara H.

2013-01-01

The potential and promise of nanotechnologies depends in large part on the ability for regulatory systems to assess and manage their benefits and risks. However, considerable uncertainty persists regarding the health and environmental implications of nanomaterials, hence the capacity for existing regulations to meet this challenge has been widely questioned. Here we draw from a survey (N=254) of US-based nano-scientists and engineers, environmental health and safety scientists, and regulatory scientists and decision-makers, to ask whether nano experts regard regulatory agencies as prepared for managing nanomaterial risks. We find that all three expert groups view regulatory agencies as unprepared. The effect is strongest for regulators themselves, and less so for scientists conducting basic, applied, or health and safety work on nanomaterials. Those who see nanotechnology risks as novel, uncertain, and difficult to assess are particularly likely to see agencies as unprepared. Trust in regulatory agencies, views of stakeholder responsibility regarding the management of risks, and socio-political values were also found to be small but significant drivers of perceived agency preparedness. These results underscore the need for new tools and methods to enable the assessment of nanomaterial risks, and to renew confidence in regulatory agencies’ ability to oversee their growing use and application in society. PMID:24244662

Does classroom-based Crew Resource Management training improve patient safety culture? A systematic review

PubMed Central

de Bruijne, Martine C; Zwijnenberg, Nicolien C; Jansma, Elise P; van Dyck, Cathy; Wagner, Cordula

2014-01-01

Aim: To evaluate the evidence of the effectiveness of classroom-based Crew Resource Management training on safety culture by a systematic review of literature. Methods: Studies were identified in PubMed, Cochrane Library, PsycINFO, and Educational Resources Information Center up to 19 December 2012. The Methods Guide for Comparative Effectiveness Reviews was used to assess the risk of bias in the individual studies. Results: In total, 22 manuscripts were included for review. Training settings, study designs, and evaluation methods varied widely. Most studies reporting only a selection of culture dimensions found mainly positive results, whereas studies reporting all safety culture dimensions of the particular survey found mixed results. On average, studies were at moderate risk of bias. Conclusion: Evidence of the effectiveness of Crew Resource Management training in health care on safety culture is scarce and the validity of most studies is limited. The results underline the necessity of more valid study designs, preferably using triangulation methods. PMID:26770720

Risk assessment and risk management of mycotoxins.

PubMed

2012-01-01

Risk assessment is the process of quantifying the magnitude and exposure, or probability, of a harmful effect to individuals or populations from certain agents or activities. Here, we summarize the four steps of risk assessment: hazard identification, dose-response assessment, exposure assessment, and risk characterization. Risk assessments using these principles have been conducted on the major mycotoxins (aflatoxins, fumonisins, ochratoxin A, deoxynivalenol, and zearalenone) by various regulatory agencies for the purpose of setting food safety guidelines. We critically evaluate the impact of these risk assessment parameters on the estimated global burden of the associated diseases as well as the impact of regulatory measures on food supply and international trade. Apart from the well-established risk posed by aflatoxins, many uncertainties still exist about risk assessments for the other major mycotoxins, often reflecting a lack of epidemiological data. Differences exist in the risk management strategies and in the ways different governments impose regulations and technologies to reduce levels of mycotoxins in the food-chain. Regulatory measures have very little impact on remote rural and subsistence farming communities in developing countries, in contrast to developed countries, where regulations are strictly enforced to reduce and/or remove mycotoxin contamination. However, in the absence of the relevant technologies or the necessary infrastructure, we highlight simple intervention practices to reduce mycotoxin contamination in the field and/or prevent mycotoxin formation during storage.

Initial development of a practical safety audit tool to assess fleet safety management practices.

PubMed

Mitchell, Rebecca; Friswell, Rena; Mooren, Lori

2012-07-01

Work-related vehicle crashes are a common cause of occupational injury. Yet, there are few studies that investigate management practices used for light vehicle fleets (i.e. vehicles less than 4.5 tonnes). One of the impediments to obtaining and sharing information on effective fleet safety management is the lack of an evidence-based, standardised measurement tool. This article describes the initial development of an audit tool to assess fleet safety management practices in light vehicle fleets. The audit tool was developed by triangulating information from a review of the literature on fleet safety management practices and from semi-structured interviews with 15 fleet managers and 21 fleet drivers. A preliminary useability assessment was conducted with 5 organisations. The audit tool assesses the management of fleet safety against five core categories: (1) management, systems and processes; (2) monitoring and assessment; (3) employee recruitment, training and education; (4) vehicle technology, selection and maintenance; and (5) vehicle journeys. Each of these core categories has between 1 and 3 sub-categories. Organisations are rated at one of 4 levels on each sub-category. The fleet safety management audit tool is designed to identify the extent to which fleet safety is managed in an organisation against best practice. It is intended that the audit tool be used to conduct audits within an organisation to provide an indicator of progress in managing fleet safety and to consistently benchmark performance against other organisations. Application of the tool by fleet safety researchers is now needed to inform its further development and refinement and to permit psychometric evaluation. Copyright © 2012 Elsevier Ltd. All rights reserved.

Safety awareness, pilot education, and incident reporting programs

NASA Technical Reports Server (NTRS)

Enders, J.

1984-01-01

Education in safety awareness, pilot training, and accident reporting is discussed. Safety awareness and risk management are examined. Both quantitative and qualitive risk management are explored. Information dissemination on safety is considered.

Management of statin-intolerant high-risk patients.

PubMed

Tziomalos, Konstantinos; Athyros, Vasilios G; Karagiannis, Asterios; Mikhailidis, Dimitri P

2010-09-01

Statins are an essential part of the management of patients at high vascular risk and are generally well-tolerated. However, statin intolerance will be observed more frequently as more stringent low density lipoprotein cholesterol (LDL-C) targets are pursued in an ever increasing number of patients. We review the management options for high-risk patients intolerant to statin treatment. Potential strategies include switching to a different statin, reducing the frequency of statin administration, substituting statins with other LDL-C-lowering agents (e.g. ezetimibe, colesevelam or nicotinic acid) and combining low-dose statin treatment with other lipid-modifying drugs. A limited number of studies specifically assessed statin-intolerant patients and most were small and of short duration. It is therefore difficult to make evidence-based recommendations for the management of this population. In addition, all treatment options have limitations in terms of safety and/or efficacy.

Environment, Health, and Safety | NREL

Science.gov Websites

property, and the environment. View the Environmental Stewardship, Health, Safety, and Quality Management (OHSAS) 18001 certification demonstrates NREL's commitment to a health and safety management system that into all activities. NREL's staff and management are committed to managing health and safety risk

[Risk Management: concepts and chances for public health].

PubMed

Palm, Stefan; Cardeneo, Margareta; Halber, Marco; Schrappe, Matthias

2002-01-15

Errors are a common problem in medicine and occur as a result of a complex process involving many contributing factors. Medical errors significantly reduce the safety margin for the patient and contribute additional costs in health care delivery. In most cases adverse events cannot be attributed to a single underlying cause. Therefore an effective risk management strategy must follow a system approach, which is based on counting and analysis of near misses. The development of defenses against the undesired effects of errors should be the main focus rather than asking the question "Who blundered?". Analysis of near misses (which in this context can be compared to indicators) offers several methodological advantages as compared to the analysis of errors and adverse events. Risk management is an integral element of quality management.

Health and safety management systems: liability or asset?

PubMed

Bennett, David

2002-01-01

Health and safety management systems have a background in theory and in various interests among employers and workplace health and safety professionals. These have resulted in a number of national systems emanating from national standard-writing centres and from employers' organizations. In some cases these systems have been recognized as national standards. The contenders for an international standard have been the International Organization of Standardization (ISO) and the International Labour Organization (ILO). The quality and environmental management systems of ISO indicate what an ISO health and safety management standard would look like. The ILO Guidelines on Safety and Health Management Systems, by contrast, are stringent, specific and potentially effective in improving health and safety performance in the workplace.

NASA's Risk Management System

NASA Technical Reports Server (NTRS)

Perera, Jeevan S.

2011-01-01

Leadership is key to success. Phased-approach for implementation of risk management is necessary. Risk management system will be simple, accessible and promote communication of information to all relevant stakeholders for optimal resource allocation and risk mitigation. Risk management should be used by all team members to manage risks -- risk office personnel. Each group is assigned Risk Integrators who are facilitators for effective risk management. Risks will be managed at the lowest-level feasible, elevate only those risks that require coordination or management from above. Risk reporting and communication is an essential element of risk management and will combine both qualitative and quantitative elements. Risk informed decision making should be introduced to all levels of management. Provide necessary checks and balances to insure that risks are caught/identified and dealt with in a timely manner. Many supporting tools, processes & training must be deployed for effective risk management implementation. Process improvement must be included in the risk processes.

An Online Risk Monitor System (ORMS) to Increase Safety and Security Levels in Industry

NASA Astrophysics Data System (ADS)

Zubair, M.; Rahman, Khalil Ur; Hassan, Mehmood Ul

2013-12-01

The main idea of this research is to develop an Online Risk Monitor System (ORMS) based on Living Probabilistic Safety Assessment (LPSA). The article highlights the essential features and functions of ORMS. The basic models and modules such as, Reliability Data Update Model (RDUM), running time update, redundant system unavailability update, Engineered Safety Features (ESF) unavailability update and general system update have been described in this study. ORMS not only provides quantitative analysis but also highlights qualitative aspects of risk measures. ORMS is capable of automatically updating the online risk models and reliability parameters of equipment. ORMS can support in the decision making process of operators and managers in Nuclear Power Plants.

NASA's Risk Management System

NASA Technical Reports Server (NTRS)

Perera, Jeevan S.

2013-01-01

Phased-approach for implementation of risk management is necessary. Risk management system will be simple, accessible and promote communication of information to all relevant stakeholders for optimal resource allocation and risk mitigation. Risk management should be used by all team members to manage risks - not just risk office personnel. Each group/department is assigned Risk Integrators who are facilitators for effective risk management. Risks will be managed at the lowest-level feasible, elevate only those risks that require coordination or management from above. Risk informed decision making should be introduced to all levels of management. ? Provide necessary checks and balances to insure that risks are caught/identified and dealt with in a timely manner. Many supporting tools, processes & training must be deployed for effective risk management implementation. Process improvement must be included in the risk processes.

Concerns related to Safety Management of Engineered Nanomaterials in research environment

NASA Astrophysics Data System (ADS)

Groso, A.; Meyer, Th

2013-04-01

Since the rise of occupational safety and health research on nanomaterials a lot of progress has been made in generating health effects and exposure data. However, when detailed quantitative risk analysis is in question, more research is needed, especially quantitative measures of workers exposure and standards to categorize toxicity/hazardousness data. In the absence of dose-response relationships and quantitative exposure measurements, control banding (CB) has been widely adopted by OHS community as a pragmatic tool in implementing a risk management strategy based on a precautionary approach. Being in charge of health and safety in a Swiss university, where nanomaterials are largely used and produced, we are also faced with the challenge related to nanomaterials' occupational safety. In this work, we discuss the field application of an in-house risk management methodology similar to CB as well as some other methodologies. The challenges and issues related to the process will be discussed. Since exact data on nanomaterials hazardousness are missing for most of the situations, we deduce that the outcome of the analysis for a particular process is essentially the same with a simple methodology that determines only exposure potential and the one taking into account the hazardousness of ENPs. It is evident that when reliable data on hazardousness factors (as surface chemistry, solubility, carcinogenicity, toxicity etc.) will be available, more differentiation will be possible in determining the risk for different materials. On the protective measures side, all CB methodologies are inclined to overprotection side, only that some of them suggest comprehensive protective/preventive measures and others remain with basic advices. The implementation and control of protective measures in research environment will also be discussed.

46 CFR 71.75-13 - Safety Management Certificate.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Safety Management Certificate. 71.75-13 Section 71.75-13... CERTIFICATION Certificates Under the International Convention for Safety of Life at Sea, 1960 § 71.75-13 Safety... valid Safety Management Certificate and a copy of their company's valid Document of Compliance...

A Software Safety Risk Taxonomy for Use in Retrospective Safety Cases

NASA Technical Reports Server (NTRS)

Hill, Janice L.

2007-01-01

Safety standards contain technical and process-oriented safely requirements. The best time to include these requirements is early in the development lifecycle of the system. When software safety requirements are levied on a legacy system after the fact, a retrospective safety case will need to be constructed for the software in the system. This can be a difficult task because there may be few to no art facts available to show compliance to the software safely requirements. The risks associated with not meeting safely requirements in a legacy safely-critical computer system must be addressed to give confidence for reuse. This paper introduces a proposal for a software safely risk taxonomy for legacy safely-critical computer systems, by specializing the Software Engineering Institute's 'Software Development Risk Taxonomy' with safely elements and attributes.

Integrated Safety Risk Reduction Approach to Enhancing Human-Rated Spaceflight Safety

NASA Astrophysics Data System (ADS)

Mikula, J. F. Kip

2005-12-01

This paper explores and defines the current accepted concept and philosophy of safety improvement based on a Reliability enhancement (called here Reliability Enhancement Based Safety Theory [REBST]). In this theory a Reliability calculation is used as a measure of the safety achieved on the program. This calculation may be based on a math model or a Fault Tree Analysis (FTA) of the system, or on an Event Tree Analysis (ETA) of the system's operational mission sequence. In each case, the numbers used in this calculation are hardware failure rates gleaned from past similar programs. As part of this paper, a fictional but representative case study is provided that helps to illustrate the problems and inaccuracies of this approach to safety determination. Then a safety determination and enhancement approach based on hazard, worst case analysis, and safety risk determination (called here Worst Case Based Safety Theory [WCBST]) is included. This approach is defined and detailed using the same example case study as shown in the REBST case study. In the end it is concluded that an approach combining the two theories works best to reduce Safety Risk.

Improving diabetic foot care in a nurse-managed safety-net clinic.

PubMed

Peterson, Joann M; Virden, Mary D

2013-05-01

This article is a description of the development and implementation of a Comprehensive Diabetic Foot Care Program and assessment tool in an academically affiliated nurse-managed, multidisciplinary, safety-net clinic. The assessment tool parallels parameters identified in the Task Force Foot Care Interest Group of the American Diabetes Association's report published in 2008, "Comprehensive Foot Examination and Risk Assessment." Review of literature, Silver City Health Center's (SCHC) 2009 Annual Report, retrospective chart review. Since the full implementation of SCHC's Comprehensive Diabetic Foot Care Program, there have been no hospitalizations of clinic patients for foot-related complications. The development of the Comprehensive Diabetic Foot Assessment tool and the implementation of the Comprehensive Diabetic Foot Care Program have resulted in positive outcomes for the patients in a nurse-managed safety-net clinic. This article demonstrates that quality healthcare services can successfully be developed and implemented in a safety-net clinic setting. ©2012 The Author(s) Journal compilation ©2012 American Association of Nurse Practitioners.

Safety considerations in the pharmacological management of atrial fibrillation.

PubMed

Camm, A John

2008-07-21

The pharmacological management of atrial fibrillation (AF) requires careful consideration from a safety perspective. This article focuses primarily on maintenance therapy using antiarrhythmic drugs (AADs). The foremost safety issue for AADs is the propensity of class IA and III agents to cause torsade de pointes arrhythmias. Class IA drugs, particularly quinidine, can induce torsade de pointes at low or subtherapeutic doses, but higher doses are not necessarily associated with an increased incidence. 'Pure' class III drugs such as dofetilide induce torsade de pointes in a dose-related manner, but some class III agents with more complex actions such as amiodarone have a markedly lower potential to cause this arrhythmia. The risk of torsade de pointes precludes the use of class IA and 'pure' class III agents in patients with left ventricular hypertrophy and bradycardia. Class IC agents may cause sustained monomorphic ventricular tachycardias and are generally precluded in ischaemic and structural heart disease. Advanced heart failure patients may be treated with amiodarone or dofetilide, but most other AADs are unsuitable. The most important extracardiac toxicities occurring with AADs are those of amiodarone. Drug interactions are a significant safety issue in the management of AF, including pharmacokinetic interactions in which plasma levels of the AAD are raised - increasing the risk of proarrhythmia - and concomitant use of drugs that prolong the QT interval. Notwithstanding these considerations, most patients with AF can be considered for rhythm control, provided there is adequate pre-treatment assessment and protocols for initiation, dosing and monitoring are followed with care.

Integrating service user and practitioner expertise within a web-based system for collaborative mental-health risk and safety management.

PubMed

Buckingham, Christopher D; Adams, Ann; Vail, Laura; Kumar, Ashish; Ahmed, Abu; Whelan, Annie; Karasouli, Eleni

2015-10-01

To develop a decision support system (DSS), myGRaCE, that integrates service user (SU) and practitioner expertise about mental health and associated risks of suicide, self-harm, harm to others, self-neglect, and vulnerability. The intention is to help SUs assess and manage their own mental health collaboratively with practitioners. An iterative process involving interviews, focus groups, and agile software development with 115 SUs, to elicit and implement myGRaCE requirements. Findings highlight shared understanding of mental health risk between SUs and practitioners that can be integrated within a single model. However, important differences were revealed in SUs' preferred process of assessing risks and safety, which are reflected in the distinctive interface, navigation, tool functionality and language developed for myGRaCE. A challenge was how to provide flexible access without overwhelming and confusing users. The methods show that practitioner expertise can be reformulated in a format that simultaneously captures SU expertise, to provide a tool highly valued by SUs. A stepped process adds necessary structure to the assessment, each step with its own feedback and guidance. The GRiST web-based DSS (www.egrist.org) links and integrates myGRaCE self-assessments with GRiST practitioner assessments for supporting collaborative and self-managed healthcare. Copyright © 2015. Published by Elsevier Ireland Ltd.

Vaccine safety evaluation: Practical aspects in assessing benefits and risks.

PubMed

Di Pasquale, Alberta; Bonanni, Paolo; Garçon, Nathalie; Stanberry, Lawrence R; El-Hodhod, Mostafa; Tavares Da Silva, Fernanda

2016-12-20

Vaccines are different from most medicines in that they are administered to large and mostly healthy populations including infants and children, so there is a low tolerance for potential risks or side-effects. In addition, the long-term benefits of immunisation in reducing or eliminating infectious diseases may induce complacency due to the absence of cases. However, as demonstrated in recent measles outbreaks in Europe and United States, reappearance of the disease occurs as soon as vaccine coverage falls. Unfounded vaccine scares such as those associating the combined measles-mumps-rubella vaccine with autism, and whole-cell pertussis vaccines with encephalopathy, can also have massive impacts, resulting in reduced vaccine uptake and disease resurgence. The safety assessment of vaccines is exhaustive and continuous; beginning with non-clinical evaluation of their individual components in terms of purity, stability and sterility, continuing throughout the clinical development phase and entire duration of use of the vaccine; including post-approval. The breadth and depth of safety assessments conducted at multiple levels by a range of independent organizations increases confidence in the rigour with which any potential risks or side-effects are investigated and managed. Industry, regulatory agencies, academia, the medical community and the general public all play a role in monitoring vaccine safety. Within these stakeholder groups, the healthcare professional and vaccine provider have key roles in the prevention, identification, investigation and management of adverse events following immunisation (AEFI). Guidelines and algorithms aid in determining whether AEFI may have been caused by the vaccine, or whether it is coincidental to it. Healthcare providers are encouraged to rigorously investigate AEFIs and to report them via local reporting processes. The ultimate objective for all parties is to ensure vaccines have a favourable benefit-risk profile. Copyright �

Ethical Risk Management Education in Engineering: A Systematic Review.

PubMed

Guntzburger, Yoann; Pauchant, Thierry C; Tanguy, Philippe A

2017-04-01

Risk management is certainly one of the most important professional responsibilities of an engineer. As such, this activity needs to be combined with complex ethical reflections, and this requirement should therefore be explicitly integrated in engineering education. In this article, we analyse how this nexus between ethics and risk management is expressed in the engineering education research literature. It was done by reviewing 135 articles published between 1980 and March 1, 2016. These articles have been selected from 21 major journals that specialize in engineering education, engineering ethics and ethics education. Our review suggests that risk management is mostly used as an anecdote or an example when addressing ethics issues in engineering education. Further, it is perceived as an ethical duty or requirement, achieved through rational and technical methods. However, a small number of publications do offer some critical analyses of ethics education in engineering and their implications for ethical risk and safety management. Therefore, we argue in this article that the link between risk management and ethics should be further developed in engineering education in order to promote the progressive change toward more socially and environmentally responsible engineering practices. Several research trends and issues are also identified and discussed in order to support the engineering education community in this project.

[Global risk management].

PubMed

Sghaier, W; Hergon, E; Desroches, A

2015-08-01

Risk management is a fundamental component of any successful company, whether it is in economic, societal or environmental aspect. Risk management is an especially important activity for companies that optimal security challenge of products and services is great. This is the case especially for the health sector institutions. Risk management is therefore a decision support tool and a means to ensure the sustainability of an organization. In this context, what methods and approaches implemented to manage the risks? Through this state of the art, we are interested in the concept of risk and risk management processes. Then we focus on the different methods of risk management and the criteria for choosing among these methods. Finally we highlight the need to supplement these methods by a systemic and global approach including through risk assessment by the audits. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Operational, quality, and risk management in the transfusion service: lessons learned.

PubMed

Goodnough, Lawrence Tim

2012-07-01

For general health care, the difference between quality and safety has been unclear for measurable patient outcomes. In contrast, in the transfusion service (TS), the relationship between quality and safety has been direct and demonstrable. Case studies are summarized to illustrate the relationship between operations, quality management, and risk management in the TS. In blood availability for elective surgery over 3 audited intervals, the incidence of patients undergoing elective surgery without available crossmatched blood that had been requested was 1:333, 1:328, and 1:225 for pre-quality improvement, post-quality improvement, and subsequent postintervention audit assessment, respectively. In event discovery reports (EDRs) over 2 years, incidence of biologic product deviation reports (Food and Drug Administration reportable) was successfully reduced from 60 biologic product deviation reports (12%) of 507 EDRs in 2009 to 42 (12%) of 336 EDRs in 2010. In wrong blood in tube, 102 specimens were identified (by a change in patient's ABO/Rh) from 176,711 type and screen/cross-match specimens received over a 5-year interval, detected either by previous patient record of ABO/Rh or by a second specimen for blood type confirmation implemented in our TS for the last 3 years. No known cases of "mismatched" red blood cell transfusion have occurred during this interval. There is an inverse relationship between resources/time expended on quality and risk management relative to volumes of operations in the TS. Laboratory-based initiatives that improve patient safety and clinical outcomes need to have resources aligned with the personnel and time required for quality management and risk management. Copyright © 2012 Elsevier Inc. All rights reserved.

Perceived safety management practices in the logistics sector.

PubMed

Auyong, Hui-Nee; Zailani, Suhaiza; Surienty, Lilis

2016-03-09

Malaysia's progress on logistics has been slowed to keep pace with its growth in trade. The Government has been pressing companies to improve the safety of their activities in order to reduce society's loss due to occupational accidents and illnesses. Occupational safety and health is a crucial part of a workplace because every worker has to take care of his/her own safety and health. The main occupational safety and health (OSH) national policy in Malaysia is the enactment of the Occupational Safety and Health Act (OSHA) 1994. Only those companies which have excellent health and safety care have good quality and productive employees. This study investigated safety management practices in the logistics sector. The present study is concerned with the human factors to safety in the logistics industry. The authors examined the perceived safety management practices of workers in the logistics sector. The purpose was to identify the perception of safety management practices of Malaysian logistics personnel. Survey questionnaires were distributed to assess logistics personnel about management commitment. The quantitative method using the availability sampling method was applied. The data gathered from the survey were analysed using SPSS software. The responses to the survey were rated according to the Likert scale type, with '1' indicating strongly disagree and '5' indicating strongly agree. One hundred and three employees of logistics functions completed the survey. The highest mean scores were found for fire apparatus, prioritisation of safety, and safety policy. The results from this study also emphasise the importance of the management's commitment in enhancing workplace safety. Specifically, companies should maintain good relations between the employer and the employee to help reduce workplace injuries.

Identifying Home Care Clinicians’ Information Needs for Managing Fall Risks

PubMed Central

Alhuwail, Dari

2016-01-01

Summary Objectives To help manage the risk of falls in home care, this study aimed to (i) identify home care clinicians’ information needs and how they manage missing or inaccurate data, (ii) identify problems that impact effectiveness and efficiency associated with retaining, exchanging, or processing information about fall risks in existing workflows and currently adopted health information technology (IT) solutions, and (iii) offer informatics-based recommendations to improve fall risk management interventions. Methods A case study was carried out in a single not-for-profit suburban Medicare-certified home health agency with three branches. Qualitative data were collected over a six month period through observations, semi-structured interviews, and focus groups. The Framework method was used for analysis. Maximum variation sampling was adopted to recruit a diverse sample of clinicians. Results Overall, the information needs for fall risk management were categorized into physiological, care delivery, educational, social, environmental, and administrative domains. Examples include a brief fall-related patient history, weight-bearing status, medications that affect balance, availability of caregivers at home, and the influence of patients’ cultures on fall management interventions. The unavailability and inaccuracy of critical information related to fall risks can delay necessary therapeutic services aimed at reducing patients’ risk for falling and thereby jeopardizing their safety. Currently adopted IT solutions did not adequately accommodate data related to fall risk management. Conclusion The results highlight the essential information for fall risk management in home care. Home care workflows and health IT solutions must effectively and efficiently retain, exchange, and process information necessary for fall risk management. Interoperability and integration of the various health IT solutions to make data sharing accessible to all clinicians is critical

NASA System Safety Handbook. Volume 2: System Safety Concepts, Guidelines, and Implementation Examples

NASA Technical Reports Server (NTRS)

Dezfuli, Homayoon; Benjamin, Allan; Everett, Christopher; Feather, Martin; Rutledge, Peter; Sen, Dev; Youngblood, Robert

2015-01-01

This is the second of two volumes that collectively comprise the NASA System Safety Handbook. Volume 1 (NASASP-210-580) was prepared for the purpose of presenting the overall framework for System Safety and for providing the general concepts needed to implement the framework. Volume 2 provides guidance for implementing these concepts as an integral part of systems engineering and risk management. This guidance addresses the following functional areas: 1.The development of objectives that collectively define adequate safety for a system, and the safety requirements derived from these objectives that are levied on the system. 2.The conduct of system safety activities, performed to meet the safety requirements, with specific emphasis on the conduct of integrated safety analysis (ISA) as a fundamental means by which systems engineering and risk management decisions are risk-informed. 3.The development of a risk-informed safety case (RISC) at major milestone reviews to argue that the systems safety objectives are satisfied (and therefore that the system is adequately safe). 4.The evaluation of the RISC (including supporting evidence) using a defined set of evaluation criteria, to assess the veracity of the claims made therein in order to support risk acceptance decisions.

System safety management: A new discipline

NASA Technical Reports Server (NTRS)

Pope, W. C.

1971-01-01

The systems theory is discussed in relation to safety management. It is suggested that systems safety management, as a new discipline, holds great promise for reducing operating errors, conserving labor resources, avoiding operating costs due to mistakes, and for improving managerial techniques. It is pointed out that managerial failures or system breakdowns are the basic reasons for human errors and condition defects. In this respect, a recommendation is made that safety engineers stop visualizing the problem only with the individual (supervisor or employee) and see the problem from the systems point of view.

Risk assessment strategies as a tool in the application of the Appropriate Level of Protection (ALOP) and Food Safety Objective (FSO) by risk managers.

PubMed

Gkogka, E; Reij, M W; Gorris, L G M; Zwietering, M H

2013-10-01

In the course of the last decade, the Appropriate Level of Protection (ALOP), the Food Safety Objective (FSO) and their associated metrics have been proposed by the World Trade Organization and Codex Alimentarius as a means for competent authorities to ultimately translate governmental public health policy regarding food safety into risk-based targets for the food industry. The industry needs to meet these targets through the effective choice of control measures that are part of its operational food safety management system. The aim of this study was to put the practical application of ALOP and FSO to the test in the case of Salmonella in chicken meat in the Netherlands. Two different risk assessment approaches were applied to derive potential ALOP and FSO values, a 'top-down' approach based on epidemiological data and a 'bottom-up' approach based on food supply chain data. To this end, two stochastic models specific to the Dutch situation were built. Comparisons between 23 countries in Europe were also made using the top-down model. The mean estimated current Level Of Protection values were similar for the two approaches applied, with the bottom-up model yielding 87 cases per 100,000 inhabitants per year (95% CI: 0.03, 904) and the top-down model 71 (95% CI: 9.9, 155). The estimated FSO values on the other hand were considerably different with the mean 'top down' FSO being -4.6 log CFU/g (95% CI: -5.4, -4.1) and the mean 'bottom-up' FSO -6.0 log CFU/g (95% CI: -8.1, -2.9) reflecting major differences in the output distributions of this parameter obtained with the two approaches. Significant differences were observed between current LOP values for different EU countries, although it was not clear whether this was due to actual differences in the factors influencing the risk of salmonellosis or due to the quality of the available data. Copyright © 2013 Elsevier B.V. All rights reserved.

Risk assessment and management of radiofrequency radiation exposure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dabala, Dana; Surducan, Emanoil; Surducan, Vasile

2013-11-13

Radiofrequency radiation (RFR) industry managers, occupational physicians, security department, and other practitioners must be advised on the basic of biophysics and the health effects of RF electromagnetic fields so as to guide the management of exposure. Information on biophysics of RFR and biological/heath effects is derived from standard texts, literature and clinical experiences. Emergency treatment and ongoing care is outlined, with clinical approach integrating the circumstances of exposure and the patient's symptoms. Experimental risk assessment model in RFR chronic exposure is proposed. Planning for assessment and monitoring exposure, ongoing care, safety measures and work protection are outlining the proper management.

Risk assessment and management of radiofrequency radiation exposure

NASA Astrophysics Data System (ADS)

Dabala, Dana; Surducan, Emanoil; Surducan, Vasile; Neamtu, Camelia

2013-11-01

Radiofrequency radiation (RFR) industry managers, occupational physicians, security department, and other practitioners must be advised on the basic of biophysics and the health effects of RF electromagnetic fields so as to guide the management of exposure. Information on biophysics of RFR and biological/heath effects is derived from standard texts, literature and clinical experiences. Emergency treatment and ongoing care is outlined, with clinical approach integrating the circumstances of exposure and the patient's symptoms. Experimental risk assessment model in RFR chronic exposure is proposed. Planning for assessment and monitoring exposure, ongoing care, safety measures and work protection are outlining the proper management.

Psychosocial risks: is risk management strategic enough in business and policy making?

PubMed

Langenhan, Melissa K; Leka, Stavroula; Jain, Aditya

2013-06-01

In times of continuous change and volatile markets, organizations are increasingly characterized by downsizing, work intensification, and resource rationalization. This has resulted in diversification, and the emergence of new risks within the field of occupational health and safety, with an important impact. This paper focuses on one such type of risk in the modern workplace-psychosocial risks. The current study aimed to explore stakeholder perspectives, regarding the extent to which psychosocial risks are incorporated into strategic risk management practices, at both the business and policy level. Semi-structured interviews were conducted with 14 professionals, representing employer, expert, policy maker, and trade union stakeholder perspectives. It was found that the majority of organizations do not sufficiently, if at all, understand and incorporate psychosocial risks into strategic decision making, whereby the key barrier related to practical difficulties of not knowing how to manage psychosocial risks adequately. The study found that there is a need to close the gap between policy and practice on a number of levels. Future recommendations comprise a policy framework and infrastructure underpinned by educational initiatives, partnerships, and networks to drive a shift in attitudes toward recognizing the duality of the concept of risk (including both potential negative and positive outcomes) and moving beyond simple regulatory compliance.

Psychosocial Risks: Is Risk Management Strategic Enough in Business and Policy Making?

PubMed Central

Langenhan, Melissa K.; Leka, Stavroula; Jain, Aditya

2013-01-01

Background In times of continuous change and volatile markets, organizations are increasingly characterized by downsizing, work intensification, and resource rationalization. This has resulted in diversification, and the emergence of new risks within the field of occupational health and safety, with an important impact. This paper focuses on one such type of risk in the modern workplace—psychosocial risks. The current study aimed to explore stakeholder perspectives, regarding the extent to which psychosocial risks are incorporated into strategic risk management practices, at both the business and policy level. Methods Semi-structured interviews were conducted with 14 professionals, representing employer, expert, policy maker, and trade union stakeholder perspectives. Results It was found that the majority of organizations do not sufficiently, if at all, understand and incorporate psychosocial risks into strategic decision making, whereby the key barrier related to practical difficulties of not knowing how to manage psychosocial risks adequately. Conclusion The study found that there is a need to close the gap between policy and practice on a number of levels. Future recommendations comprise a policy framework and infrastructure underpinned by educational initiatives, partnerships, and networks to drive a shift in attitudes toward recognizing the duality of the concept of risk (including both potential negative and positive outcomes) and moving beyond simple regulatory compliance. PMID:23961331

Probabilistic Causal Analysis for System Safety Risk Assessments in Commercial Air Transport

NASA Technical Reports Server (NTRS)

Luxhoj, James T.

2003-01-01

Aviation is one of the critical modes of our national transportation system. As such, it is essential that new technologies be continually developed to ensure that a safe mode of transportation becomes even safer in the future. The NASA Aviation Safety Program (AvSP) is managing the development of new technologies and interventions aimed at reducing the fatal aviation accident rate by a factor of 5 by year 2007 and by a factor of 10 by year 2022. A portfolio assessment is currently being conducted to determine the projected impact that the new technologies and/or interventions may have on reducing aviation safety system risk. This paper reports on advanced risk analytics that combine the use of a human error taxonomy, probabilistic Bayesian Belief Networks, and case-based scenarios to assess a relative risk intensity metric. A sample case is used for illustrative purposes.

The precautionary principle and pharmaceutical risk management.

PubMed

Callréus, Torbjörn

2005-01-01

Although it is often vigorously contested and has several different formulations, the precautionary principle has in recent decades guided environmental policy making in the face of scientific uncertainty. Originating from a criticism of traditional risk assessment, the key element of the precautionary principle is the justification for acting in the face of uncertain knowledge about risks. In the light of its growing invocation in various areas that are related to public health and recently in relation to drug safety issues, this article presents an introductory review of the main elements of the precautionary principle and some arguments conveyed by its advocates and opponents. A comparison of the characteristics of pharmaceutical risk management and environmental policy making (i.e. the setting within which the precautionary principle evolved), indicates that several important differences exist. If believed to be of relevance, in order to avoid arbitrary and unpredictable decision making, both the interpretation and possible application of the precautionary principle need to be adapted to the conditions of pharmaceutical risk management.

The effects of crew resource management on teamwork and safety climate at Veterans Health Administration facilities.

PubMed

Schwartz, Miriam E; Welsh, Deborah E; Paull, Douglas E; Knowles, Regina S; DeLeeuw, Lori D; Hemphill, Robin R; Essen, Keith E; Sculli, Gary L

2017-11-09

Communication failure is a significant source of adverse events in health care and a leading root cause of sentinel events reported to the Joint Commission. The Veterans Health Administration National Center for Patient Safety established Clinical Team Training (CTT) as a comprehensive program to enhance patient safety and to improve communication and teamwork among health care professionals. CTT is based on techniques used in aviation's Crew Resource Management (CRM) training. The aviation industry has reached a significant safety record in large part related to the culture change generated by CRM and sustained by its recurrent implementation. This article focuses on the improvement of communication, teamwork, and patient safety by utilizing a standardized, CRM-based, interprofessional, immersive training in diverse clinical areas. The Teamwork and Safety Climate Questionnaire was used to evaluate safety climate before and after CTT. The scores for all of the 27 questions on the questionnaire showed an increase from baseline to 12 months, and 11 of those increases were statistically significant. A recurrent training is recommended to maintain the positive outcomes. CTT enhances patient safety and reduces risk of patient harm by improving teamwork and facilitating clear, concise, specific and timely communication among health care professionals. © 2017 American Society for Healthcare Risk Management of the American Hospital Association.

Language barriers and patient safety risks in hospital care. A mixed methods study.

PubMed

van Rosse, Floor; de Bruijne, Martine; Suurmond, Jeanine; Essink-Bot, Marie-Louise; Wagner, Cordula

2016-02-01

A language barrier has been shown to be a threat for quality of hospital care. International studies highlighted a lack of adequate noticing, reporting, and bridging of a language barrier. However, studies on the link between language proficiency and patient safety are scarce, especially in Europe. The present study investigates patient safety risks due to language barriers during hospitalization, and the way language barriers are detected, reported, and bridged in Dutch hospital care. We combined quantitative and qualitative methods in a sample of 576 ethnic minority patients who were hospitalized on 30 wards within four urban hospitals. The nursing and medical records of 17 hospital admissions of patients with language barriers were qualitatively analyzed, and complemented by 12 in-depth interviews with care providers and patients and/or their relatives to identify patient safety risks during hospitalization. The medical records of all 576 patients were screened for language barrier reports. The results were compared to patients' self-reported Dutch language proficiency. The policies of wards regarding bridging language barriers were compared with the reported use of interpreters in the medical records. Situations in hospital care where a language barrier threatened patient safety included daily nursing tasks (i.e. medication administration, pain management, fluid balance management) and patient-physician interaction concerning diagnosis, risk communication and acute situations. In 30% of the patients that reported a low Dutch proficiency, no language barrier was documented in the patient record. Relatives of patients often functioned as interpreter for them and professional interpreters were hardly used. The present study showed a wide variety of risky situations in hospital care for patients with language barriers. These risks can be reduced by adequately bridging the language barrier, which, in the first place, demands adequate detecting and reporting of a

Designing new institutions for implementing integrated disaster risk management: key elements and future directions.

PubMed

Gopalakrishnan, Chennat; Okada, Norio

2007-12-01

The goal of integrated disaster risk management is to promote an overall improvement in the quality of safety and security in a region, city or community at disaster risk. This paper presents the case for a thorough overhaul of the institutional component of integrated disaster risk management. A review of disaster management institutions in the United States indicates significant weaknesses in their ability to contribute effectively to the implementation of integrated disaster risk management. Our analysis and findings identify eight key elements for the design of dynamic new disaster management institutions. Six specific approaches are suggested for incorporating the identified key elements in building new institutions that would have significant potential for enhancing the effective implementation of integrated disaster risk management. We have developed a possible blueprint for effective design and construction of efficient, sustainable and functional disaster management institutions.

Aviation's Normal Operations Safety Audit: a safety management and educational tool for health care? Results of a small-scale trial.

PubMed

Bennett, Simon A

2017-01-01

A National Health Service (NHS) contingent liability for medical error claims of over £26 billion. To evaluate the safety management and educational benefits of adapting aviation's Normal Operations Safety Audit (NOSA) to health care. In vivo research, a NOSA was performed by medical students at an English NHS Trust. After receiving training from the author, the students spent 6 days gathering data under his supervision. The data revealed a threat-rich environment, where errors - some consequential - were made (359 threats and 86 errors were recorded over 2 weeks). The students claimed that the exercise improved their observational, investigative, communication, teamworking and other nontechnical skills. NOSA is potentially an effective safety management and educational tool for health care. It is suggested that 1) the UK General Medical Council mandates that all medical students perform a NOSA in fulfillment of their degree; 2) the participating NHS Trusts be encouraged to act on students' findings; and 3) the UK Department of Health adopts NOSA as a cornerstone risk assessment and management tool.

Evidence-based safety (EBS) management: A new approach to teaching the practice of safety management (SM).

PubMed

Wang, Bing; Wu, Chao; Shi, Bo; Huang, Lang

2017-12-01

In safety management (SM), it is important to make an effective safety decision based on the reliable and sufficient safety-related information. However, many SM failures in organizations occur for a lack of the necessary safety-related information for safety decision-making. Since facts are the important basis and foundation for decision-making, more efforts to seek the best evidence relevant to a particular SM problem would lead to a more effective SM solution. Therefore, the new paradigm for decision-making named "evidence-based practice (EBP)" can hold important implications for SM, because it uses the current best evidence for effective decision-making. Based on a systematic review of existing SM approaches and an analysis of reasons why we need new SM approaches, we created a new SM approach called evidence-based safety (EBS) management by introducing evidence-based practice into SM. It was necessary to create new SM approaches. A new SM approach called EBS was put forward, and the basic questions of EBS such as its definition and core were analyzed in detail. Moreover, the determinants of EBS included manager's attitudes towards EBS; evidence-based consciousness in SM; evidence sources; technical support; EBS human resources; organizational culture; and individual attributes. EBS is a new and effective approach to teaching the practice of SM. Of course, further research on EBS should be carried out to make EBS a reality. Practical applications: Our work can provide a new and effective idea and method to teach the practice of SM. Specifically, EBS proposed in our study can help safety professionals make an effective safety decision based on a firm foundation of high-grade evidence. Copyright © 2017 National Safety Council and Elsevier Ltd. All rights reserved.

A Risk Management Architecture for Emergency Integrated Aircraft Control

NASA Technical Reports Server (NTRS)

McGlynn, Gregory E.; Litt, Jonathan S.; Lemon, Kimberly A.; Csank, Jeffrey T.

2011-01-01

Enhanced engine operation--operation that is beyond normal limits--has the potential to improve the adaptability and safety of aircraft in emergency situations. Intelligent use of enhanced engine operation to improve the handling qualities of the aircraft requires sophisticated risk estimation techniques and a risk management system that spans the flight and propulsion controllers. In this paper, an architecture that weighs the risks of the emergency and of possible engine performance enhancements to reduce overall risk to the aircraft is described. Two examples of emergency situations are presented to demonstrate the interaction between the flight and propulsion controllers to facilitate the enhanced operation.

[New approach for managing microbial risks in food].

PubMed

Augustin, Jean-Christophe

2015-01-01

The aim of the food legislation is to ensure the protection of human health. Traditionally, the food legislation requires food business operators to apply good hygiene practices and specific procedures to control foodborne pathogens. These regulations allowed reaching a high level of health protection. The improvement of the system will require risk-based approaches. Firstly, risk assessment should allow the identification of high-risk situations where resources should be allocated for a better targeting of risk management. Then, management measures should be adapted to the health objective. In this approach, the appropriate level of protection is converted intofood safety and performance objectives on the food chain, i.e., maximum microbial contamination to fulfil the acceptable risk level. When objectives are defined, the food business operators and competent authorities can identify control options to comply with the objectives and establish microbiological criteria to verify compliance with these objectives. This approach, described for approximately 10 years, operative thanks to the development of quantitative risk assessment techniques, is still difficult to use in practical terms since it requires a commitment of competent authorities to define the acceptable risk and needs also the implementation of sometimes complex risk models.

[Hospital maintenance: management, risks, and responsibilities].

PubMed

Rabino, F

2002-01-01

Principal activities of maintenance carried out in hospital, staff required, various type of organization (inside team or global service), management aspects are described. Subjects responsible of maintenance are characterized and the relationships between Service of Maintenance and Service of Prevention and Protection in hospital are specified. Responsibility aspects concerning safety of maintenance workers and main risks which are exposed are defined. The importance of disponibility of a good maintenance handbook and of projects and programs of practice for new hospitals are emphasized.

Improving safety in small enterprises through an integrated safety management intervention.

PubMed

Kines, Pete; Andersen, Dorte; Andersen, Lars Peter; Nielsen, Kent; Pedersen, Louise

2013-02-01

This study tests the applicability of a participatory behavior-based injury prevention approach integrated with safety culture initiatives. Sixteen small metal industry enterprises (10-19 employees) are randomly assigned to receive the intervention or not. Safety coaching of owners/managers result in the identification of 48 safety tasks, 85% of which are solved at follow-up. Owner/manager led constructive dialogue meetings with workers result in the prioritization of 29 tasks, 79% of which are accomplished at follow-up. Intervention enterprises have significant increases on six of eight safety-perception-survey factors, while comparisons increase on only one factor. Both intervention and comparison enterprises demonstrate significant increases in their safety observation scores. Interview data validate and supplement these results, providing some evidence for behavior change and the initiation of safety culture change. Given that over 95% of enterprises in most countries have less than 20 employees, there is great potential for adapting this integrated approach to other industries. Copyright © 2012 National Safety Council and Elsevier Ltd. All rights reserved.

Safety behavior: Job demands, job resources, and perceived management commitment to safety.

PubMed

Hansez, Isabelle; Chmiel, Nik

2010-07-01

The job demands-resources model posits that job demands and resources influence outcomes through job strain and work engagement processes. We test whether the model can be extended to effort-related "routine" safety violations and "situational" safety violations provoked by the organization. In addition we test more directly the involvement of job strain than previous studies which have used burnout measures. Structural equation modeling provided, for the first time, evidence of predicted relationships between job strain and "routine" violations and work engagement with "routine" and "situational" violations, thereby supporting the extension of the job demands-resources model to safety behaviors. In addition our results showed that a key safety-specific construct 'perceived management commitment to safety' added to the explanatory power of the job demands-resources model. A predicted path from job resources to perceived management commitment to safety was highly significant, supporting the view that job resources can influence safety behavior through both general motivational involvement in work (work engagement) and through safety-specific processes.

Achievements and Perspectives of the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Louvat, D.; Lacoste, A.C.

The Joint Convention on the Safety of Spent Fuel management and on the Safety of Radioactive Waste Management is the first legal instrument to directly address the safety of spent fuel and radioactive waste management on a global scale. The Joint Convention entered into force in 2001. This paper describes its process and its main achievements to date. The perspectives to establish of a Global Waste Safety Regime based on the Joint Convention are also discussed. (authors)

Working conditions and workplace health and safety promotion in home care: A mixed-method study from Swedish managers' perspectives.

PubMed

Gard, Gunvor; Larsson, Agneta

2017-11-02

Today, we can see a trend toward increased psychosocial strain at work among home-care managers and staff. The aim of this study is to describe home care managers' views on their own psychosocial working conditions and on how to promote workplace health and safety in a municipality in northern Sweden. A mixed-methods design was used, including questionnaire and qualitative focus group data. The qualitative data were analyzed by manifest content analysis. The results indicate that most managers perceived increased variety in work and opportunities for development at work, but at the same time increased demands. The managers suggested that workplace health and safety could be improved by risk assessment and improved communication, a clear communication chain by a real as well as a virtual platform for communication. In summary, workplace health and safety could be improved by risk assessments and by a physical as well as a virtual platform for communication.

A data-driven approach to quality risk management

PubMed Central

Alemayehu, Demissie; Alvir, Jose; Levenstein, Marcia; Nickerson, David

2013-01-01

Aim: An effective clinical trial strategy to ensure patient safety as well as trial quality and efficiency involves an integrated approach, including prospective identification of risk factors, mitigation of the risks through proper study design and execution, and assessment of quality metrics in real-time. Such an integrated quality management plan may also be enhanced by using data-driven techniques to identify risk factors that are most relevant in predicting quality issues associated with a trial. In this paper, we illustrate such an approach using data collected from actual clinical trials. Materials and Methods: Several statistical methods were employed, including the Wilcoxon rank-sum test and logistic regression, to identify the presence of association between risk factors and the occurrence of quality issues, applied to data on quality of clinical trials sponsored by Pfizer. Results: Only a subset of the risk factors had a significant association with quality issues, and included: Whether study used Placebo, whether an agent was a biologic, unusual packaging label, complex dosing, and over 25 planned procedures. Conclusion: Proper implementation of the strategy can help to optimize resource utilization without compromising trial integrity and patient safety. PMID:24312890

A data-driven approach to quality risk management.

PubMed

Alemayehu, Demissie; Alvir, Jose; Levenstein, Marcia; Nickerson, David

2013-10-01

An effective clinical trial strategy to ensure patient safety as well as trial quality and efficiency involves an integrated approach, including prospective identification of risk factors, mitigation of the risks through proper study design and execution, and assessment of quality metrics in real-time. Such an integrated quality management plan may also be enhanced by using data-driven techniques to identify risk factors that are most relevant in predicting quality issues associated with a trial. In this paper, we illustrate such an approach using data collected from actual clinical trials. Several statistical methods were employed, including the Wilcoxon rank-sum test and logistic regression, to identify the presence of association between risk factors and the occurrence of quality issues, applied to data on quality of clinical trials sponsored by Pfizer. ONLY A SUBSET OF THE RISK FACTORS HAD A SIGNIFICANT ASSOCIATION WITH QUALITY ISSUES, AND INCLUDED: Whether study used Placebo, whether an agent was a biologic, unusual packaging label, complex dosing, and over 25 planned procedures. Proper implementation of the strategy can help to optimize resource utilization without compromising trial integrity and patient safety.

33 CFR 96.220 - What makes up a safety management system?

Code of Federal Regulations, 2011 CFR

2011-07-01

... SECURITY VESSEL OPERATING REGULATIONS RULES FOR THE SAFE OPERATION OF VESSELS AND SAFETY MANAGEMENT SYSTEMS Company and Vessel Safety Management Systems § 96.220 What makes up a safety management system? (a) The safety management system must document the responsible person's— (1) Safety and pollution prevention...

Management Commitment to Safety, Teamwork, and Hospital Worker Injuries.

PubMed

McGonagle, Alyssa K; Essenmacher, Lynnette; Hamblin, Lydia; Luborsky, Mark; Upfal, Mark; Arnetz, Judith

2016-01-01

Although many studies link teamwork in health care settings to patient safety, evidence linking teamwork to hospital worker safety is lacking. This study addresses this gap by providing evidence linking teamwork perceptions in hospital workers to worker injuries, and further, finds a linkage between manager commitment to safety and teamwork. Organizational records of worker injuries and survey responses regarding management commitment to safety and teamwork from 446 hospital workers within 42 work units in a multi-site hospital system were examined. Results underscored the particular importance of teamwork on worker injuries as well as the importance of management commitment to safety as relating to teamwork. To improve worker safety, organizational leaders and unit managers should work to maintain environments wherein teamwork can thrive.

Management Commitment to Safety, Teamwork, and Hospital Worker Injuries

PubMed Central

McGonagle, Alyssa K.; Essenmacher, Lynnette; Hamblin, Lydia; Luborsky, Mark; Upfal, Mark; Arnetz, Judith

2016-01-01

Although many studies link teamwork in health care settings to patient safety, evidence linking teamwork to hospital worker safety is lacking. This study addresses this gap by providing evidence linking teamwork perceptions in hospital workers to worker injuries, and further, finds a linkage between manager commitment to safety and teamwork. Organizational records of worker injuries and survey responses regarding management commitment to safety and teamwork from 446 hospital workers within 42 work units in a multi-site hospital system were examined. Results underscored the particular importance of teamwork on worker injuries as well as the importance of management commitment to safety as relating to teamwork. To improve worker safety, organizational leaders and unit managers should work to maintain environments wherein teamwork can thrive. PMID:27867448

Post-Challenger evaluation of space shuttle risk assessment and management

NASA Technical Reports Server (NTRS)

1988-01-01

As the shock of the Space Shuttle Challenger accident began to subside, NASA initiated a wide range of actions designed to ensure greater safety in various aspects of the Shuttle system and an improved focus on safety throughout the National Space Transportation System (NSTS) Program. Certain specific features of the NASA safety process are examined: the Critical Items List (CIL) and the NASA review of the Shuttle primary and backup units whose failure might result in the loss of life, the Shuttle vehicle, or the mission; the failure modes and effects analyses (FMEA); and the hazard analysis and their review. The conception of modern risk management, including the essential element of objective risk assessment is described and it is contrasted with NASA's safety process in general terms. The discussion, findings, and recommendations regarding particular aspects of the NASA STS safety assurance process are reported. The 11 subsections each deal with a different aspect of the process. The main lessons learned by SCRHAAC in the course of the audit are summarized.

Safety and Waste Management for SAM Pathogen Methods

EPA Pesticide Factsheets

The General Safety and Waste Management page offers section-specific safety and waste management details for the pathogens included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

Safety and Waste Management for SAM Biotoxin Methods

EPA Pesticide Factsheets

The General Safety and Waste Management page offers section-specific safety and waste management details for the biotoxins included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

Need of risk management practice amongst bumiputera contractors in Malaysia construction industries

NASA Astrophysics Data System (ADS)

Syuhada Fadzil, Nur; Noor, Nurazuwa Md; Rahman, Ismail Abdul

2017-11-01

Malaysia construction industry has been growing continuously with double-digit growth for the past two decades. There are many issues surrounded the industry such as delay in delivery, cost overrun, quality and safety. In bumiputera contractor’s context, the literature review found that 32 issues were encountered in the construction project. These issues can be handled properly with the application of risk management. According to previous researchers, application of risk management in Malaysia construction industry is at the low level where it is implemented in traditional ways that are brainstorming and checklist. These were due to lack of knowledge, the high cost of hiring experts and avoiding extra cost. Besides that, this study also intentions to analyse the risk categories in the construction industry as well as identify risk management process to resolve the construction issues. Hence, this paper presents issues engulfed by Bumiputera contractors which can partly be resolved by applying risk management practice in carrying out the construction activity. This may inspire the contractors to apply the risk management practice in ensuring the success of their construction project.

Impacts of soil and water pollution on food safety and health risks in China.

PubMed

Lu, Yonglong; Song, Shuai; Wang, Ruoshi; Liu, Zhaoyang; Meng, Jing; Sweetman, Andrew J; Jenkins, Alan; Ferrier, Robert C; Li, Hong; Luo, Wei; Wang, Tieyu

2015-04-01

Environmental pollution and food safety are two of the most important issues of our time. Soil and water pollution, in particular, have historically impacted on food safety which represents an important threat to human health. Nowhere has that situation been more complex and challenging than in China, where a combination of pollution and an increasing food safety risk have affected a large part of the population. Water scarcity, pesticide over-application, and chemical pollutants are considered to be the most important factors impacting on food safety in China. Inadequate quantity and quality of surface water resources in China have led to the long-term use of waste-water irrigation to fulfill the water requirements for agricultural production. In some regions this has caused serious agricultural land and food pollution, especially for heavy metals. It is important, therefore, that issues threatening food safety such as combined pesticide residues and heavy metal pollution are addressed to reduce risks to human health. The increasing negative effects on food safety from water and soil pollution have put more people at risk of carcinogenic diseases, potentially contributing to 'cancer villages' which appear to correlate strongly with the main food producing areas. Currently in China, food safety policies are not integrated with soil and water pollution management policies. Here, a comprehensive map of both soil and water pollution threats to food safety in China is presented and integrated policies addressing soil and water pollution for achieving food safety are suggested to provide a holistic approach. Copyright © 2014 Elsevier Ltd. All rights reserved.

Measuring mining safety with injury statistics: lost workdays as indicators of risk.

PubMed

Coleman, Patrick J; Kerkering, John C

2007-01-01

Mining in the United States remains one of the most hazardous industries, despite significant reductions in fatal injury rates over the last century. Coal mine fatality rates, for example, have dropped almost a thousand-fold since their peak in 1908. While incidence rates are very important indicators, lost worktime measures offer an alternative metric for evaluating job safety and health performance. The first objective of this study examined the distributions and summary statistics of all injuries reported to the Mine Safety and Health Administration from 1983 through 2004. Over the period studied (1983-2004), there were 31,515,368 lost workdays associated with mining injuries, for an equivalent of 5,700 person-years lost annually. The second objective addressed the problem of comparing safety program performance in mines for situations where denominator data were lacking. By examining the consequences of injuries, comparisons can be made between disparate operations without the need for denominators. Total risk in the form of lost workday sums can help to distinguish between lower- and higher-risk operations or time periods. Our method was to use a beta distribution to model the losses and to compare underground coal mining to underground metal/nonmetal mining from 2000 to 2004. Our results showed the probability of an injury having 10 or more lost workdays was 0.52 for coal mine cases versus 0.35 for metal/nonmetal mine cases. In addition, a comparison of injuries involving continuous mining machines over 2001-2002 versus 2003-2004 showed that the ratio of average losses in the later period to those in the earlier period was approximately 1.08, suggesting increasing risks for such operations. This denominator-free safety measure will help the mining industry more effectively identify higher-risk operations and more realistically evaluate their safety improvement programs. Attention to a variety of metrics concerning the performance of a job safety and health

Safety and Waste Management for SAM Chemistry Methods

EPA Pesticide Factsheets

The General Safety and Waste Management page offers section-specific safety and waste management details for the chemical analytes included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

Safety and Waste Management for SAM Radiochemical Methods

EPA Pesticide Factsheets

The General Safety and Waste Management page offers section-specific safety and waste management details for the radiochemical analytes included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

A risk-based decision support framework for selection of appropriate safety measure system for underground coal mines.

PubMed

Samantra, Chitrasen; Datta, Saurav; Mahapatra, Siba Sankar

2017-03-01

In the context of underground coal mining industry, the increased economic issues regarding implementation of additional safety measure systems, along with growing public awareness to ensure high level of workers safety, have put great pressure on the managers towards finding the best solution to ensure safe as well as economically viable alternative selection. Risk-based decision support system plays an important role in finding such solutions amongst candidate alternatives with respect to multiple decision criteria. Therefore, in this paper, a unified risk-based decision-making methodology has been proposed for selecting an appropriate safety measure system in relation to an underground coal mining industry with respect to multiple risk criteria such as financial risk, operating risk, and maintenance risk. The proposed methodology uses interval-valued fuzzy set theory for modelling vagueness and subjectivity in the estimates of fuzzy risk ratings for making appropriate decision. The methodology is based on the aggregative fuzzy risk analysis and multi-criteria decision making. The selection decisions are made within the context of understanding the total integrated risk that is likely to incur while adapting the particular safety system alternative. Effectiveness of the proposed methodology has been validated through a real-time case study. The result in the context of final priority ranking is seemed fairly consistent.

Natural-technological risk assessment and management

NASA Astrophysics Data System (ADS)

Burova, Valentina; Frolova, Nina

2016-04-01

EM-DAT statistical data on human impact and economic damages in the 1st semester 2015 are the highest since 2011: 41% of disasters were floods, responsible for 39% of economic damage and 7% of events were earthquakes responsible for 59% of total death toll. This suggests that disaster risk assessment and management still need to be improved and stay the principle issue in national and international related programs. The paper investigates the risk assessment and management practice in the Russian Federation at different levels. The method is proposed to identify the territories characterized by integrated natural-technological hazard. The maps of the Russian Federation zoning according to the integrated natural-technological hazard level are presented, as well as the procedure of updating the integrated hazard level taking into account the activity of separate processes. Special attention is paid to data bases on past natural and technological processes consequences, which are used for verification of current hazard estimation. The examples of natural-technological risk zoning for the country and some regions territory are presented. Different output risk indexes: both social and economic, are estimated taking into account requirements of end-users. In order to increase the safety of population of the Russian Federation the trans-boundaries hazards are also taken into account.

Managing major chemical accidents in China: towards effective risk information.

PubMed

He, Guizhen; Zhang, Lei; Lu, Yonglong; Mol, Arthur P J

2011-03-15

Chemical industries, from their very inception, have been controversial due to the high risks they impose on safety of human beings and the environment. Recent decades have witnessed increasing impacts of the accelerating expansion of chemical industries and chemical accidents have become a major contributor to environmental and health risks in China. This calls for the establishment of an effective chemical risk management system, which requires reliable, accurate and comprehensive data in the first place. However, the current chemical accident-related data system is highly fragmented and incomplete, as different responsible authorities adopt different data collection standards and procedures for different purposes. In building a more comprehensive, integrated and effective information system, this article: (i) reviews and assesses the existing data sources and data management, (ii) analyzes data on 976 recorded major hazardous chemical accidents in China over the last 40 years, and (iii) identifies the improvements required for developing integrated risk management in China. Copyright © 2011 Elsevier B.V. All rights reserved.

46 CFR 91.60-30 - Safety Management Certificate.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Safety Management Certificate. 91.60-30 Section 91.60-30 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS INSPECTION AND CERTIFICATION Certificates Under International Convention for Safety of Life at Sea, 1974 § 91.60-30 Safety Management Certificate. All...

Design an optimum safety policy for personnel safety management - A system dynamic approach

NASA Astrophysics Data System (ADS)

Balaji, P.

2014-10-01

Personnel safety management (PSM) ensures that employee's work conditions are healthy and safe by various proactive and reactive approaches. Nowadays it is a complex phenomenon because of increasing dynamic nature of organisations which results in an increase of accidents. An important part of accident prevention is to understand the existing system properly and make safety strategies for that system. System dynamics modelling appears to be an appropriate methodology to explore and make strategy for PSM. Many system dynamics models of industrial systems have been built entirely for specific host firms. This thesis illustrates an alternative approach. The generic system dynamics model of Personnel safety management was developed and tested in a host firm. The model was undergone various structural, behavioural and policy tests. The utility and effectiveness of model was further explored through modelling a safety scenario. In order to create effective safety policy under resource constraint, DOE (Design of experiment) was used. DOE uses classic designs, namely, fractional factorials and central composite designs. It used to make second order regression equation which serve as an objective function. That function was optimized under budget constraint and optimum value used for safety policy which shown greatest improvement in overall PSM. The outcome of this research indicates that personnel safety management model has the capability for acting as instruction tool to improve understanding of safety management and also as an aid to policy making.

Design an optimum safety policy for personnel safety management - A system dynamic approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Balaji, P.

2014-10-06

Personnel safety management (PSM) ensures that employee's work conditions are healthy and safe by various proactive and reactive approaches. Nowadays it is a complex phenomenon because of increasing dynamic nature of organisations which results in an increase of accidents. An important part of accident prevention is to understand the existing system properly and make safety strategies for that system. System dynamics modelling appears to be an appropriate methodology to explore and make strategy for PSM. Many system dynamics models of industrial systems have been built entirely for specific host firms. This thesis illustrates an alternative approach. The generic system dynamicsmore » model of Personnel safety management was developed and tested in a host firm. The model was undergone various structural, behavioural and policy tests. The utility and effectiveness of model was further explored through modelling a safety scenario. In order to create effective safety policy under resource constraint, DOE (Design of experiment) was used. DOE uses classic designs, namely, fractional factorials and central composite designs. It used to make second order regression equation which serve as an objective function. That function was optimized under budget constraint and optimum value used for safety policy which shown greatest improvement in overall PSM. The outcome of this research indicates that personnel safety management model has the capability for acting as instruction tool to improve understanding of safety management and also as an aid to policy making.« less

Can Civility Norms Boost Positive Effects of Management Commitment to Safety?

PubMed

McGonagle, Alyssa K; Childress, Niambi M; Walsh, Benjamin M; Bauerle, Timothy J

2016-07-03

We proposed that civility norms would strengthen relationships between management commitment to safety and workers' safety motivation, safety behaviors, and injuries. Survey data were obtained from working adults in hazardous jobs-those for which physical labor is required and/or a realistic possibility of physical injury is present (N = 290). Results showed that management commitment positively related to workers' safety motivation, safety participation, and safety compliance, and negatively related to minor injuries. Furthermore, management commitment to safety displayed a stronger positive relationship with safety motivation and safety participation, and a stronger negative relationship with minor worker injuries when civility norms were high (versus low). The results confirm existing known relationships between management commitment to safety and worker safety motivation and behavior; furthermore, civility norms facilitate the relationships between management commitment to safety and various outcomes important to worker safety. In order to promote an optimally safe working environment, managers should demonstrate a commitment to worker safety and promote positive norms for interpersonal treatment between workers in their units.

75 FR 40845 - Preventing Deaths and Injuries of Fire Fighters Using Risk Management Principles at Structure Fires

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-14

... NIOSH 141-A] Preventing Deaths and Injuries of Fire Fighters Using Risk Management Principles at Structure Fires AGENCY: National Institute for Occupational Safety and Health (NIOSH) of the Centers for... publication entitled ``Preventing Deaths and Injuries of Fire Fighters Using Risk Management Principles at...

Applicability of the Common Safety Method for Risk Evaluation and Assessment (CSM-RA) to the Space Domain

NASA Astrophysics Data System (ADS)

Moreira, Francisco; Silva, Nuno

2016-08-01

Safety systems require accident avoidance. This is covered by application standards, processes, techniques and tools that support the identification, analysis, elimination or reduction to an acceptable level of system risks and hazards. Ideally, a safety system should be free of hazards. However, both industry and academia have been struggling to ensure appropriate risk and hazard analysis, especially in what concerns completeness of the hazards, formalization, and timely analysis in order to influence the specifications and the implementation. Such analysis is also important when considering a change to an existing system. The Common Safety Method for Risk Evaluation and Assessment (CSM- RA) is a mandatory procedure whenever any significant change is proposed to the railway system in a European Member State. This paper provides insights on the fundamentals of CSM-RA based and complemented with Hazard Analysis. When and how to apply them, and the relation and similarities of these processes with industry standards and the system life cycles is highlighted. Finally, the paper shows how CSM-RA can be the basis of a change management process, guiding the identification and management of the hazards helping ensuring the similar safety level as the initial system. This paper will show how the CSM-RA principles can be used in other domains particularly for space system evolution.

Aviation’s Normal Operations Safety Audit: a safety management and educational tool for health care? Results of a small-scale trial

PubMed Central

Bennett, Simon A

2017-01-01

Background A National Health Service (NHS) contingent liability for medical error claims of over £26 billion. Objectives To evaluate the safety management and educational benefits of adapting aviation’s Normal Operations Safety Audit (NOSA) to health care. Methods In vivo research, a NOSA was performed by medical students at an English NHS Trust. After receiving training from the author, the students spent 6 days gathering data under his supervision. Results The data revealed a threat-rich environment, where errors – some consequential – were made (359 threats and 86 errors were recorded over 2 weeks). The students claimed that the exercise improved their observational, investigative, communication, teamworking and other nontechnical skills. Conclusion NOSA is potentially an effective safety management and educational tool for health care. It is suggested that 1) the UK General Medical Council mandates that all medical students perform a NOSA in fulfillment of their degree; 2) the participating NHS Trusts be encouraged to act on students’ findings; and 3) the UK Department of Health adopts NOSA as a cornerstone risk assessment and management tool. PMID:28860881

General Safety and Waste Management Related to SAM

EPA Pesticide Factsheets

The General Safety and Waste Management page offers section-specific safety and waste management details for chemicals, radiochemicals, pathogens, and biotoxins included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

Food safety in the domestic environment: the effect of consumer risk information on human disease risks.

PubMed

Nauta, Maarten J; Fischer, Arnout R H; van Asselt, Esther D; de Jong, Aarieke E I; Frewer, Lynn J; de Jonge, Rob

2008-02-01

The improvement of food safety in the domestic environment requires a transdisciplinary approach, involving interaction between both the social and natural sciences. This approach is applied in a study on risks associated with Campylobacter on broiler meat. First, some web-based information interventions were designed and tested on participant motivation and intentions to cook more safely. Based on these self-reported measures, the intervention supported by the emotion "disgust" was selected as the most promising information intervention. Its effect on microbial cross-contamination was tested by recruiting a set of participants who prepared a salad with chicken breast fillet carrying a known amount of tracer bacteria. The amount of tracer that could be recovered from the salad revealed the transfer and survival of Campylobacter and was used as a measure of hygiene. This was introduced into an existing risk model on Campylobacter in the Netherlands to assess the effect of the information intervention both at the level of exposure and the level of human disease risk. We showed that the information intervention supported by the emotion "disgust" alone had no measurable effect on the health risk. However, when a behavioral cue was embedded within the instruction for the salad preparation, the risk decreased sharply. It is shown that a transdisciplinary approach, involving research on risk perception, microbiology, and risk assessment, is successful in evaluating the efficacy of an information intervention in terms of human health risks. The approach offers a novel tool for science-based risk management in the area of food safety.

Proposal of a risk-factor-based analytical approach for integrating occupational health and safety into project risk evaluation.

PubMed

Badri, Adel; Nadeau, Sylvie; Gbodossou, André

2012-09-01

Excluding occupational health and safety (OHS) from project management is no longer acceptable. Numerous industrial accidents have exposed the ineffectiveness of conventional risk evaluation methods as well as negligence of risk factors having major impact on the health and safety of workers and nearby residents. Lack of reliable and complete evaluations from the beginning of a project generates bad decisions that could end up threatening the very existence of an organization. This article supports a systematic approach to the evaluation of OHS risks and proposes a new procedure based on the number of risk factors identified and their relative significance. A new concept called risk factor concentration along with weighting of risk factor categories as contributors to undesirable events are used in the analytical hierarchy process multi-criteria comparison model with Expert Choice(©) software. A case study is used to illustrate the various steps of the risk evaluation approach and the quick and simple integration of OHS at an early stage of a project. The approach allows continual reassessment of criteria over the course of the project or when new data are acquired. It was thus possible to differentiate the OHS risks from the risk of drop in quality in the case of the factory expansion project. Copyright © 2011 Elsevier Ltd. All rights reserved.

The role of the ward manager in promoting patient safety.

PubMed

Pinnock, David

In this article the role of the ward manager in promoting patient safety is explored. The background to the development of the patient safety agenda is briefly discussed and the relationship between quality and safety is illustrated. The pivotal importance of the role of the ward manager in delivering services to patients is underlined and literature on patient safety is examined to identify what a ward manager can do to make care safer. Possible actions of the ward manager to improve safety discussed in the literature are structured around the Leadership Framework. This framework identifies seven domains for the leadership of service delivery. Ward managers use their personal qualities, and network and work within teams, while managing performance and facilitating innovation, change and measurement for improvement. The challenge of promoting patient safety for ward managers is briefly explored and recommendations for further research are made.

46 CFR 126.480 - Safety Management Certificate.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Safety Management Certificate. 126.480 Section 126.480 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS INSPECTION AND CERTIFICATION Inspection for Certification § 126.480 Safety Management Certificate. (a) All offshore supply vessels of 500 gross tons or over to...

Bus operator perceptions of safety risks.

DOT National Transportation Integrated Search

2013-07-01

This paper presents the results of a survey of TriMet bus operators addressing safety risks in their assigned work. Surveyed risk factors : were organized into five categories: vehicle design and condition; route layout; operating conditions; fatigue...

Applying Sensor-Based Technology to Improve Construction Safety Management.

PubMed

Zhang, Mingyuan; Cao, Tianzhuo; Zhao, Xuefeng

2017-08-11

Construction sites are dynamic and complicated systems. The movement and interaction of people, goods and energy make construction safety management extremely difficult. Due to the ever-increasing amount of information, traditional construction safety management has operated under difficult circumstances. As an effective way to collect, identify and process information, sensor-based technology is deemed to provide new generation of methods for advancing construction safety management. It makes the real-time construction safety management with high efficiency and accuracy a reality and provides a solid foundation for facilitating its modernization, and informatization. Nowadays, various sensor-based technologies have been adopted for construction safety management, including locating sensor-based technology, vision-based sensing and wireless sensor networks. This paper provides a systematic and comprehensive review of previous studies in this field to acknowledge useful findings, identify the research gaps and point out future research directions.

[The workplace injury trends in the petrochemical industry: from data analysis to risk management].

PubMed

Campo, Giuseppe; Martini, Benedetta

2013-01-01

The most recent INAIL data show that, in 2009-2011, the accident frequency rate and the severity rate of workplace injuries in the chemical industry are lower than for the total non-agricultural workforce. The chemical industry, primarily because of the complex and hazardous work processes, requires an appropriate system for assessing and monitoring specific risks.The implementation of Responsible Care, a risk management system specific for the chemical industry, in 1984, has represented a historical step in the process of critical awareness of risk management by the chemical companies. Responsible Care is a risk management system specifically designed on the risk profiles of this type of enterprise, which integrates safety, health and environment. A risk management system, suitable for the needs of a chemical company, should extend its coverage area, beyond the responsible management of products throughout the entire production cycle, to the issues of corporate responsibility.

Therapeutic risk management of the suicidal patient: augmenting clinical suicide risk assessment with structured instruments.

PubMed

Homaifar, Beeta; Matarazzo, Bridget; Wortzel, Hal S

2013-09-01

This column is the second in a series presenting a model for therapeutic risk management of the suicidal patient. As discussed in the first part of the series, the model involves several elements including augmenting clinical risk assessment with structured instruments, stratifying risk in terms of both severity and temporality, and developing and documenting a safety plan. This column explores in more detail how to augment clinical risk assessment with structured instruments. Unstructured clinical interviews have the potential to miss important aspects of suicide risk assessment. By augmenting the free-form clinical interview with structured instruments that demonstrate reliability and validity, a more nuanced and multifaceted approach to suicide risk assessment is achieved. Incorporating structured instruments into practice also serves a medicolegal function, since these instruments may become a living part of the medical record, establishing baseline levels of suicidal thoughts and behaviors and facilitating future clinical determinations regarding safety needs. We describe several instruments used in a multidisciplinary suicide consultation service, each of which has demonstrated relevance to suicide risk assessment and screening, ease of administration, and strong psychometric properties. In addition, we emphasize the importance of viewing suicide risk assessment as an ongoing process rather than as a singular event. Finally, we discuss special considerations in the evolving practice of risk assessment.

Implementation of cold risk management in occupational safety, occupational health and quality practices. Evaluation of a development process and its effects at the finnish maritime administration.

PubMed

Risikko, Tanja; Remes, Jouko; Hassi, Juhani

2008-01-01

Cold is a typical environmental risk factor in outdoor work in northern regions. It should be taken into account in a company's occupational safety, health and quality systems. A development process for improving cold risk management at the Finnish Maritime Administration (FMA) was carried out by FMA and external experts. FMA was to implement it. Three years after the development phase, the outcomes and implementation were evaluated. The study shows increased awareness about cold work and few concrete improvements. Concrete improvements in occupational safety and health practices could be seen in the pilot group. However, organization-wide implementation was insufficient, the main reasons being no organization-wide practices, unclear process ownership, no resources and a major reorganization process. The study shows a clear need for expertise supporting implementation. The study also presents a matrix for analyzing the process.

Rational risk-based decision support for drinking water well managers by optimized monitoring designs

NASA Astrophysics Data System (ADS)

Enzenhöfer, R.; Geiges, A.; Nowak, W.

2011-12-01

Advection-based well-head protection zones are commonly used to manage the contamination risk of drinking water wells. Considering the insufficient knowledge about hazards and transport properties within the catchment, current Water Safety Plans recommend that catchment managers and stakeholders know, control and monitor all possible hazards within the catchments and perform rational risk-based decisions. Our goal is to supply catchment managers with the required probabilistic risk information, and to generate tools that allow for optimal and rational allocation of resources between improved monitoring versus extended safety margins and risk mitigation measures. To support risk managers with the indispensable information, we address the epistemic uncertainty of advective-dispersive solute transport and well vulnerability (Enzenhoefer et al., 2011) within a stochastic simulation framework. Our framework can separate between uncertainty of contaminant location and actual dilution of peak concentrations by resolving heterogeneity with high-resolution Monte-Carlo simulation. To keep computational costs low, we solve the reverse temporal moment transport equation. Only in post-processing, we recover the time-dependent solute breakthrough curves and the deduced well vulnerability criteria from temporal moments by non-linear optimization. Our first step towards optimal risk management is optimal positioning of sampling locations and optimal choice of data types to reduce best the epistemic prediction uncertainty for well-head delineation, using the cross-bred Likelihood Uncertainty Estimator (CLUE, Leube et al., 2011) for optimal sampling design. Better monitoring leads to more reliable and realistic protection zones and thus helps catchment managers to better justify smaller, yet conservative safety margins. In order to allow an optimal choice in sampling strategies, we compare the trade-off in monitoring versus the delineation costs by accounting for ill

[Improving blood safety: errors management in transfusion medicine].

PubMed

Bujandrić, Nevenka; Grujić, Jasmina; Krga-Milanović, Mirjana

2014-01-01

The concept of blood safety includes the entire transfusion chain starting with the collection of blood from the blood donor, and ending with blood transfusion to the patient. The concept involves quality management system as the systematic monitoring of adverse reactions and incidents regarding the blood donor or patient. Monitoring of near-miss errors show the critical points in the working process and increase transfusion safety. The aim of the study was to present the analysis results of adverse and unexpected events in transfusion practice with a potential risk to the health of blood donors and patients. One-year retrospective study was based on the collection, analysis and interpretation of written reports on medical errors in the Blood Transfusion Institute of Vojvodina. Errors were distributed according to the type, frequency and part of the working process where they occurred. Possible causes and corrective actions were described for each error. The study showed that there were not errors with potential health consequences for the blood donor/patient. Errors with potentially damaging consequences for patients were detected throughout the entire transfusion chain. Most of the errors were identified in the preanalytical phase. The human factor was responsible for the largest number of errors. Error reporting system has an important role in the error management and the reduction of transfusion-related risk of adverse events and incidents. The ongoing analysis reveals the strengths and weaknesses of the entire process and indicates the necessary changes. Errors in transfusion medicine can be avoided in a large percentage and prevention is cost-effective, systematic and applicable.

Impact of access management practices to pedestrian safety.

DOT National Transportation Integrated Search

2017-03-31

This study focused on the impact of access management practices to the safety of pedestrians. Some : of the access management practices considered to impact pedestrian safety included limiting direct : access to and from major streets, locating signa...

Research on station management in subway operation safety

NASA Astrophysics Data System (ADS)

Li, Yiman

2017-10-01

The management of subway station is an important part of the safe operation of urban subway. In order to ensure the safety of subway operation, it is necessary to study the relevant factors that affect station management. In the protection of subway safety operations on the basis of improving the quality of service, to promote the sustained and healthy development of subway stations. This paper discusses the influencing factors of subway operation accident and station management, and analyzes the specific contents of station management security for subway operation, and develops effective suppression measures. It is desirable to improve the operational quality and safety factor for subway operations.

[Risk management in anesthesia and critical care medicine].

PubMed

Eisold, C; Heller, A R

2017-03-01

Throughout its history, anesthesia and critical care medicine has experienced vast improvements to increase patient safety. Consequently, anesthesia has never been performed on such a high level as it is being performed today. As a result, we do not always fully perceive the risks involved in our daily activity. A survey performed in Swiss hospitals identified a total of 169 hot spots which endanger patient safety. It turned out that there is a complex variety of possible errors that can only be tackled through consistent implementation of a safety culture. The key elements to reduce complications are continuing staff education, algorithms and standard operating procedures (SOP), working according to the principles of crisis resource management (CRM) and last but not least the continuous work-up of mistakes identified by critical incident reporting systems.

Applying Sensor-Based Technology to Improve Construction Safety Management

PubMed Central

Zhang, Mingyuan; Cao, Tianzhuo; Zhao, Xuefeng

2017-01-01

Construction sites are dynamic and complicated systems. The movement and interaction of people, goods and energy make construction safety management extremely difficult. Due to the ever-increasing amount of information, traditional construction safety management has operated under difficult circumstances. As an effective way to collect, identify and process information, sensor-based technology is deemed to provide new generation of methods for advancing construction safety management. It makes the real-time construction safety management with high efficiency and accuracy a reality and provides a solid foundation for facilitating its modernization, and informatization. Nowadays, various sensor-based technologies have been adopted for construction safety management, including locating sensor-based technology, vision-based sensing and wireless sensor networks. This paper provides a systematic and comprehensive review of previous studies in this field to acknowledge useful findings, identify the research gaps and point out future research directions. PMID:28800061