Sample records for safety standard number

  1. 76 FR 8699 - Locomotive Safety Standards; Correction

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-15

    .... FRA-2009-0094 and FRA-2009-0095, Notice No. 2] RIN 2130-AC16 Locomotive Safety Standards; Correction... notifying the public that the correct docket number for the Locomotive Safety Standards notice of proposed... locomotive safety standards. See 76 FR 2200. The NPRM established a public docket to receive comments in...

  2. 77 FR 23159 - Locomotive Safety Standards; Correction

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-18

    .... FRA-2009-0094 and FR-2009-0095, Notice No. 4] RIN 2130-AC16 Locomotive Safety Standards; Correction... notifying the public that the correct docket number for the Locomotive Safety Standards final rule is FRA... rule related to locomotive safety standards. See 77 FR 21312. The final rule established a public...

  3. NASA Software Safety Standard

    NASA Technical Reports Server (NTRS)

    Rosenberg, Linda

    1997-01-01

    If software is a critical element in a safety critical system, it is imperative to implement a systematic approach to software safety as an integral part of the overall system safety programs. The NASA-STD-8719.13A, "NASA Software Safety Standard", describes the activities necessary to ensure that safety is designed into software that is acquired or developed by NASA, and that safety is maintained throughout the software life cycle. A PDF version, is available on the WWW from Lewis. A Guidebook that will assist in the implementation of the requirements in the Safety Standard is under development at the Lewis Research Center (LeRC). After completion, it will also be available on the WWW from Lewis.

  4. 75 FR 22303 - Safety Standard for Bassinets and Cradles: Notice of Proposed Rulemaking

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-28

    ... an infant's development. Once an infant can push up by him/herself, a number of hazards are created... ``Commission'') to promulgate consumer product safety standards for durable infant or toddler products. These... product safety standards for durable infant or toddler products. These standards are to be ``substantially...

  5. Securing Safety - Spaceflight Standards for the Mass Market

    NASA Astrophysics Data System (ADS)

    Goh, G.

    The projected total revenue of the space tourism industry is expected to exceed USD $1 billion by 2021. The vast economic potential of space tourism has fuelled ambitious plans for commercial orbital and suborbital flights, in addition to longer- duration spaceflights on board the International Space Station (ISS) and other planned orbiting habitats. International and national legal frameworks are challenged to provide regulations to ensure minimum standards of spaceflight safety for a high risk activity that aims to enter the mainstream tourism market. Thrown into the mix are various considerations of the number of spaceflight participants per flight, the economic viability of stringent safety standards, the plethora of possible flight vehicles and the compensation mechanism in case of violations of safety regulations. This paper surveys the legal challenges in the regulation of safety in commercial manned spaceflight, including issues of jurisdiction, authorization, licensing and liability. Drawing on analogous developments in other fields of law related to international carriage, a safety regulation framework with minimum international standards is proposed. This proposed framework considers both accident avoidance and emergency response in light of international legal, policy and economic perspectives.

  6. NASA's Software Safety Standard

    NASA Technical Reports Server (NTRS)

    Ramsay, Christopher M.

    2007-01-01

    NASA relies more and more on software to control, monitor, and verify its safety critical systems, facilities and operations. Since the 1960's there has hardly been a spacecraft launched that does not have a computer on board that will provide command and control services. There have been recent incidents where software has played a role in high-profile mission failures and hazardous incidents. For example, the Mars Orbiter, Mars Polar Lander, the DART (Demonstration of Autonomous Rendezvous Technology), and MER (Mars Exploration Rover) Spirit anomalies were all caused or contributed to by software. The Mission Control Centers for the Shuttle, ISS, and unmanned programs are highly dependant on software for data displays, analysis, and mission planning. Despite this growing dependence on software control and monitoring, there has been little to no consistent application of software safety practices and methodology to NASA's projects with safety critical software. Meanwhile, academia and private industry have been stepping forward with procedures and standards for safety critical systems and software, for example Dr. Nancy Leveson's book Safeware: System Safety and Computers. The NASA Software Safety Standard, originally published in 1997, was widely ignored due to its complexity and poor organization. It also focused on concepts rather than definite procedural requirements organized around a software project lifecycle. Led by NASA Headquarters Office of Safety and Mission Assurance, the NASA Software Safety Standard has recently undergone a significant update. This new standard provides the procedures and guidelines for evaluating a project for safety criticality and then lays out the minimum project lifecycle requirements to assure the software is created, operated, and maintained in the safest possible manner. This update of the standard clearly delineates the minimum set of software safety requirements for a project without detailing the implementation for those

  7. Critical Review of Commercial Secondary Lithium-Ion Battery Safety Standards

    NASA Astrophysics Data System (ADS)

    Jones, Harry P.; Chapin, Thomas, J.; Tabaddor, Mahmod

    2010-09-01

    The development of Li-ion cells with greater energy density has lead to safety concerns that must be carefully assessed as Li-ion cells power a wide range of products from consumer electronics to electric vehicles to space applications. Documented field failures and product recalls for Li-ion cells, mostly for consumer electronic products, highlight the risk of fire, smoke, and even explosion. These failures have been attributed to the occurrence of internal short circuits and the subsequent thermal runaway that can lead to fire and explosion. As packaging for some applications include a large number of cells, the risk of failure is likely to be magnified. To address concerns about the safety of battery powered products, safety standards have been developed. This paper provides a review of various international safety standards specific to lithium-ion cells. This paper shows that though the standards are harmonized on a host of abuse conditions, most lack a test simulating internal short circuits. This paper describes some efforts to introduce internal short circuit tests into safety standards.

  8. 49 CFR 385.5 - Safety fitness standard.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 5 2010-10-01 2010-10-01 false Safety fitness standard. 385.5 Section 385.5... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS SAFETY FITNESS PROCEDURES General § 385.5 Safety fitness standard. A motor carrier must meet the safety fitness standard set forth...

  9. 49 CFR 385.5 - Safety fitness standard.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 5 2011-10-01 2011-10-01 false Safety fitness standard. 385.5 Section 385.5... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS SAFETY FITNESS PROCEDURES General § 385.5 Safety fitness standard. A motor carrier must meet the safety fitness standard set forth...

  10. 24 CFR 51.203 - Safety standards.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 1 2011-04-01 2011-04-01 false Safety standards. 51.203 Section 51... Conventional Fuels or Chemicals of an Explosive or Flammable Nature § 51.203 Safety standards. The following... from a hazard: (a) Thermal Radiation Safety Standard. Projects shall be located so that: (1) The...

  11. 24 CFR 51.203 - Safety standards.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Safety standards. 51.203 Section 51... Conventional Fuels or Chemicals of an Explosive or Flammable Nature § 51.203 Safety standards. The following... from a hazard: (a) Thermal Radiation Safety Standard. Projects shall be located so that: (1) The...

  12. 75 FR 27428 - Safety Standards for Steel Erection

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-17

    ... in National Highway System construction projects to comply with a number of standards, policies, and...://www.fhwa.dot.gov/bridge/lrfd/index.htm .) For projects involving bridge construction (e.g., temporary... of these requirements will enhance the safety of employees operating on or near structural steel...

  13. NASA's Software Safety Standard

    NASA Technical Reports Server (NTRS)

    Ramsay, Christopher M.

    2005-01-01

    NASA (National Aeronautics and Space Administration) relies more and more on software to control, monitor, and verify its safety critical systems, facilities and operations. Since the 1960's there has hardly been a spacecraft (manned or unmanned) launched that did not have a computer on board that provided vital command and control services. Despite this growing dependence on software control and monitoring, there has been no consistent application of software safety practices and methodology to NASA's projects with safety critical software. Led by the NASA Headquarters Office of Safety and Mission Assurance, the NASA Software Safety Standard (STD-18l9.13B) has recently undergone a significant update in an attempt to provide that consistency. This paper will discuss the key features of the new NASA Software Safety Standard. It will start with a brief history of the use and development of software in safety critical applications at NASA. It will then give a brief overview of the NASA Software Working Group and the approach it took to revise the software engineering process across the Agency.

  14. 49 CFR 385.5 - Safety fitness standard.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 5 2012-10-01 2012-10-01 false Safety fitness standard. 385.5 Section 385.5... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS SAFETY FITNESS PROCEDURES General § 385.5 Safety fitness standard. The satisfactory safety rating is based on the degree of...

  15. 49 CFR 385.5 - Safety fitness standard.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 5 2013-10-01 2013-10-01 false Safety fitness standard. 385.5 Section 385.5... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS SAFETY FITNESS PROCEDURES General § 385.5 Safety fitness standard. The satisfactory safety rating is based on the degree of...

  16. 49 CFR 385.5 - Safety fitness standard.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 5 2014-10-01 2014-10-01 false Safety fitness standard. 385.5 Section 385.5... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS SAFETY FITNESS PROCEDURES General § 385.5 Safety fitness standard. The satisfactory safety rating is based on the degree of...

  17. 76 FR 10246 - Updating Fire Safety Standards

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-24

    ... DEPARTMENT OF VETERANS AFFAIRS 38 CFR Parts 17 and 59 RIN 2900-AN57 Updating Fire Safety Standards... regulations and update the standards for VA approval of such facilities, including standards for fire safety... to ``RIN 2900-AN57--Updating Fire Safety [[Page 10247

  18. Safety self-efficacy and safety performance: potential antecedents and the moderation effect of standardization.

    PubMed

    Katz-Navon, Tal; Naveh, Eitan; Stern, Zvi

    2007-01-01

    The purpose of this paper is to suggest a new safety self-efficacy construct and to explore its antecedents and interaction with standardization to influence in-patient safety. The paper used a survey of 161 nurses using a self-administered questionnaire over a 14-day period in two large Israeli general hospitals. Nurses answered questions relating to four safety self-efficacy antecedents: enactive mastery experiences; managers as safety role models; verbal persuasion; and safety priority, that relate to the perceived level of standardization and safety self-efficacy. Confirmatory factor analysis was used to assess the scale's construct validity. Regression models were used to test hypotheses regarding the antecedents and influence of safety self-efficacy. Results indicate that: managers as safety role models; distributing safety information; and priority given to safety, contributed to safety self-efficacy. Additionally, standardization moderated the effects of safety self-efficacy and patient safety such that safety self-efficacy was positively associated with patient safety when standardization was low rather than high. Hospital managers should be aware of individual motivations as safety self-efficacy when evaluating the potential influence of standardization on patient safety. Theoretically, the study introduces a new safety self-efficacy concept, and captures its antecedents and influence on safety performance. Also, the study suggests safety self-efficacy as a boundary condition for the influence of standardization on safety performance. Implementing standardization in healthcare is problematic because not all processes can be standardized. In this case, self-efficacy plays an important role in securing patient safety. Hence, safety self-efficacy may serve as a "substitute-for-standardization," by promoting staff behaviors that affect patient safety.

  19. 75 FR 17641 - Updating Fire Safety Standards

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-07

    ... DEPARTMENT OF VETERANS AFFAIRS 38 CFR Parts 17 and 59 RIN 2900-AN57 Updating Fire Safety Standards... for VA approval of such facilities, including standards for fire safety and heating and cooling... submitted in response to ``RIN 2900-AN57--Updating Fire Safety Standards.'' Copies of comments received will...

  20. 29 CFR 1925.2 - Safety and health standards.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 7 2014-07-01 2014-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH STANDARDS FOR FEDERAL SERVICE CONTRACTS § 1925.2 Safety and health standards...

  1. 29 CFR 1925.2 - Safety and health standards.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH STANDARDS FOR FEDERAL SERVICE CONTRACTS § 1925.2 Safety and health standards...

  2. 29 CFR 1925.2 - Safety and health standards.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 7 2012-07-01 2012-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH STANDARDS FOR FEDERAL SERVICE CONTRACTS § 1925.2 Safety and health standards...

  3. 29 CFR 1925.2 - Safety and health standards.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 7 2011-07-01 2011-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH STANDARDS FOR FEDERAL SERVICE CONTRACTS § 1925.2 Safety and health standards...

  4. 29 CFR 1925.2 - Safety and health standards.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 7 2013-07-01 2013-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH STANDARDS FOR FEDERAL SERVICE CONTRACTS § 1925.2 Safety and health standards...

  5. 46 CFR 80.25 - Notification of safety standards.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... standards, except the 1966 fire safety standards. (ii) This vessel complies with international safety standards developed prior to 1960. There is (or, is not) an automatic sprinkler system fitted in the... international safety standard. There is (or, is not) an automatic sprinkler system fitted in the passenger...

  6. 46 CFR 80.25 - Notification of safety standards.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... standards, except the 1966 fire safety standards. (ii) This vessel complies with international safety standards developed prior to 1960. There is (or, is not) an automatic sprinkler system fitted in the... international safety standard. There is (or, is not) an automatic sprinkler system fitted in the passenger...

  7. 46 CFR 80.25 - Notification of safety standards.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... standards, except the 1966 fire safety standards. (ii) This vessel complies with international safety standards developed prior to 1960. There is (or, is not) an automatic sprinkler system fitted in the... international safety standard. There is (or, is not) an automatic sprinkler system fitted in the passenger...

  8. 46 CFR 80.25 - Notification of safety standards.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... standards, except the 1966 fire safety standards. (ii) This vessel complies with international safety standards developed prior to 1960. There is (or, is not) an automatic sprinkler system fitted in the... international safety standard. There is (or, is not) an automatic sprinkler system fitted in the passenger...

  9. 10 CFR 851.23 - Safety and health standards.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

  10. 10 CFR 851.23 - Safety and health standards.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

  11. 10 CFR 851.23 - Safety and health standards.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

  12. 10 CFR 851.23 - Safety and health standards.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

  13. 10 CFR 851.23 - Safety and health standards.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

  14. 29 CFR 1924.1 - Applicable safety standards.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 7 2011-07-01 2011-07-01 false Applicable safety standards. 1924.1 Section 1924.1 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY STANDARDS APPLICABLE TO WORKSHOPS AND REHABILITATION FACILITIES ASSISTED BY GRANTS § 1924...

  15. 46 CFR 80.25 - Notification of safety standards.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Notification of safety standards. 80.25 Section 80.25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS DISCLOSURE OF SAFETY STANDARDS AND COUNTRY OF REGISTRY § 80.25 Notification of safety standards. (a) Each owner, operator, agent...

  16. 76 FR 70885 - Updating Fire Safety Standards

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-16

    ... DEPARTMENT OF VETERANS AFFAIRS 38 CFR Part 59 RIN 2900-AN57 Updating Fire Safety Standards AGENCY... Fire Protection Association (NFPA) 101. This rule helps ensure the safety of veterans in the affected... publications are: NFPA 10, Standard for Portable Fire Extinguishers; NFPA 99, Standard for Health Care...

  17. 29 CFR 505.6 - Safety and health standards.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Safety and health standards. 505.6 Section 505.6 Labor... HUMANITIES § 505.6 Safety and health standards. (a) Standards. Section 5(i)(2) and section 7(g)(2) of the Act... dangerous to the health and safety of the employees engaged in such project or production. Compliance with...

  18. 29 CFR 505.6 - Safety and health standards.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 3 2014-07-01 2014-07-01 false Safety and health standards. 505.6 Section 505.6 Labor... HUMANITIES § 505.6 Safety and health standards. (a) Standards. Section 5(i)(2) and section 7(g)(2) of the Act... dangerous to the health and safety of the employees engaged in such project or production. Compliance with...

  19. 29 CFR 505.6 - Safety and health standards.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 3 2011-07-01 2011-07-01 false Safety and health standards. 505.6 Section 505.6 Labor... HUMANITIES § 505.6 Safety and health standards. (a) Standards. Section 5(i)(2) and section 7(g)(2) of the Act... dangerous to the health and safety of the employees engaged in such project or production. Compliance with...

  20. 29 CFR 505.6 - Safety and health standards.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 3 2012-07-01 2012-07-01 false Safety and health standards. 505.6 Section 505.6 Labor... HUMANITIES § 505.6 Safety and health standards. (a) Standards. Section 5(i)(2) and section 7(g)(2) of the Act... dangerous to the health and safety of the employees engaged in such project or production. Compliance with...

  1. 29 CFR 505.6 - Safety and health standards.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 3 2013-07-01 2013-07-01 false Safety and health standards. 505.6 Section 505.6 Labor... HUMANITIES § 505.6 Safety and health standards. (a) Standards. Section 5(i)(2) and section 7(g)(2) of the Act... dangerous to the health and safety of the employees engaged in such project or production. Compliance with...

  2. Alternative Fuels Data Center: Biodiesel Codes, Standards, and Safety

    Science.gov Websites

    Codes, Standards, and Safety to someone by E-mail Share Alternative Fuels Data Center: Biodiesel Codes, Standards, and Safety on Facebook Tweet about Alternative Fuels Data Center: Biodiesel Codes , Standards, and Safety on Twitter Bookmark Alternative Fuels Data Center: Biodiesel Codes, Standards, and

  3. 49 CFR 659.15 - System safety program standard.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false System safety program standard. 659.15 Section 659... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the State Oversight Agency § 659.15 System safety program standard. (a) General requirement. Each state...

  4. Laser safety: regulations, standards, and recommendations

    NASA Astrophysics Data System (ADS)

    Smalley, Penny J.

    1993-07-01

    All healthcare professionals involved in the delivery of laser technology to patients, must develop and monitor clinical laser safety programs that ensure compliance with national, state, and local regulations, professional standards of practice, and national consensus standards. Laser safe treatment environments for patients and for personnel can be established and maintained through understanding the impact of both regulatory and advisory guidelines, comprehensive program planning, appropriate continuing education, and routine safety audits.

  5. [Expert investigation on food safety standard system framework construction in China].

    PubMed

    He, Xiang; Yan, Weixing; Fan, Yongxiang; Zeng, Biao; Peng, Zhen; Sun, Zhenqiu

    2013-09-01

    Through investigating food safety standard framework among food safety experts, to summarize the basic elements and principles of food safety standard system, and provide policy advices for food safety standards framework. A survey was carried out among 415 experts from government, professional institutions and the food industry/enterprises using the National Food Safety Standard System Construction Consultation Questionnaire designed in the name of the Secretariat of National Food Safety Standard Committee. Experts have different advices in each group about the principles of food product standards, food additive product standards, food related product standards, hygienic practice, test methods. According to the results, the best solution not only may reflect experts awareness of the work of food safety standards situation, but also provide advices for setting and revision of food safety standards for the next. Through experts investigation, the framework and guiding principles of food safety standard had been built.

  6. 41 CFR 50-204.2 - General safety and health standards.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 41 Public Contracts and Property Management 1 2010-07-01 2010-07-01 true General safety and health... Public Contracts PUBLIC CONTRACTS, DEPARTMENT OF LABOR 204-SAFETY AND HEALTH STANDARDS FOR FEDERAL SUPPLY CONTRACTS General Safety and Health Standards § 50-204.2 General safety and health standards. (a) Every...

  7. 76 FR 43743 - Pipeline Safety: Meetings of the Technical Pipeline Safety Standards Committee and the Technical...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-21

    ... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2011-0127] Pipeline Safety: Meetings of the Technical Pipeline Safety Standards Committee and the Technical Hazardous Liquid Pipeline Safety Standards Committee AGENCY: Pipeline and Hazardous Materials...

  8. 76 FR 34890 - Track Safety Standards; Concrete Crossties

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-15

    ...-0007, Notice No. 3] RIN 2130-AC01 Track Safety Standards; Concrete Crossties AGENCY: Federal Railroad... effective concrete crossties, for rail fastening systems connected to concrete crossties, and for automated inspections of track constructed with concrete crossties. The Track Safety Standards were amended via final...

  9. 77 FR 52272 - Safety Standard for Play Yards

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-29

    ... Standard for Play Yards AGENCY: Consumer Product Safety Commission. ACTION: Notice of proposed rulemaking... to amend the play yard mandatory standard. This proposed rule would address the hazards associated... Improvement Act of 2008 (CPSIA), also known as the ``Danny Keysar Child Product Safety Notification Act...

  10. 41 CFR 50-204.2 - General safety and health standards.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... health standards. 50-204.2 Section 50-204.2 Public Contracts and Property Management Other Provisions Relating to Public Contracts PUBLIC CONTRACTS, DEPARTMENT OF LABOR 204-SAFETY AND HEALTH STANDARDS FOR FEDERAL SUPPLY CONTRACTS General Safety and Health Standards § 50-204.2 General safety and health...

  11. 2002 Safety in Numbers Conference

    DOT National Transportation Integrated Search

    2002-01-09

    We are all here today because there are too many people being killed as a result of : transportation incidents. In 2000, there were more than 44,000 transportation-related deaths. : That number is unacceptable and it makes the Safety Data Initiative ...

  12. 77 FR 54836 - Federal Motor Vehicle Safety Standards

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-06

    ... DEPARTMENT OF TRANSPORTATION National Highway Traffic Safety Administration 49 CFR Part 571 Federal Motor Vehicle Safety Standards CFR Correction 0 In Title 49 of the Code of Federal Regulations... read as follows: Sec. 571.119 Standard No. 119; New pneumatic tires for motor vehicles with a GVWR of...

  13. 76 FR 22019 - Safety Standard for Toddler Beds

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-20

    ... warnings should increase consumers' understanding of the connection between the relevant behaviors and... CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Part 1217 RIN 3041-AC79 Safety Standard for Toddler Beds AGENCY: Consumer Product Safety Commission. ACTION: Final rule. SUMMARY: The Consumer Product Safety...

  14. International Safety Regulation and Standards for Space Travel and Commerce

    NASA Astrophysics Data System (ADS)

    Pelton, J. N.; Jakhu, R.

    The evolution of air travel has led to the adoption of the 1944 Chicago Convention that created the International Civil Aviation Organization (ICAO), headquartered in Montreal, Canada, and the propagation of aviation safety standards. Today, ICAO standardizes and harmonizes commercial air safety worldwide. Space travel and space safety are still at an early stage of development, and the adoption of international space safety standards and regulation still remains largely at the national level. This paper explores the international treaties and conventions that govern space travel, applications and exploration today and analyzes current efforts to create space safety standards and regulations at the national, regional and global level. Recent efforts to create a commercial space travel industry and to license commercial space ports are foreseen as means to hasten a space safety regulatory process.

  15. Suborbital Safety Technical Committee- Summary of Proposed Standards & Guidelines

    NASA Astrophysics Data System (ADS)

    Quinn, Andy; Atencia Yepez, Amaya; Klicker, Michael; Howard, Diane; Verstraeten, Joram; Other Suborbital Safety TC Members

    2013-09-01

    There are currently no international safety standards and guidelines to assist designers, operators and authorities in the suborbital domain. There is a launch licensing regime in the United States (US) to assist the forerunners of the suborbital domain however this does not provide a safety approval for the vehicle against set standards or does not have an acceptable level of safety to achieve in terms of design or operation. In Europe a certification framework may be implemented however this (or any regulatory framework) is not in place as yet. This paper summarises the 5 tasks thus far completed by the International Association for the Advancement of Space Safety (IAASS) Suborbital Safety Technical Committee (SS TC) in terms of deriving standards and guidelines for the suborbital domain. The SS TC comprises members from the suborbital industry (US and European vehicle designers), safety experts, legal experts, medical/training experts, prospective spaceport operators and members from the US and European authorities (though these members cannot directly steer the standards and guidelines - they can merely review them for interest and comment on non-policy aspects). The SS TC has been divided into three working groups (WG): Regulatory WG, Technical WG and Operations WG. The 5 tasks that are summarised in this paper include: Regulatory WG - (Task 1) Clarify and promote regulatory framework for suborbital flights (including discussions on Space Law 'v' Air Law for suborbital domain); Technical WG - (Task 1) Defining & Alignment (globally) of Safety Criteria for Suborbital domain using industry best practices, (Task 2) Software/complex hardware certification for suborbital flights; Operations WG - (Task 1) Flight Crew and Spaceflight Participant Medical and Training Standards & Guidelines for suborbital flight, (Task 2) Spaceport Safety Management System. This paper also details the next set of standards and guidelines that will be derived by the SS TC. The paper

  16. Safety in numbers: the development of Leapfrog's composite patient safety score for U.S. hospitals.

    PubMed

    Austin, J Matthew; D'Andrea, Guy; Birkmeyer, John D; Leape, Lucian L; Milstein, Arnold; Pronovost, Peter J; Romano, Patrick S; Singer, Sara J; Vogus, Timothy J; Wachter, Robert M

    2014-03-01

    To develop a composite patient safety score that provides patients, health-care providers, and health-care purchasers with a standardized method to evaluate patient safety in general acute care hospitals in the United States. The Leapfrog Group sought guidance from a panel of national patient safety experts to develop the composite score. Candidate patient safety performance measures for inclusion in the score were identified from publicly reported national sources. Hospital performance on each measure was converted into a "z-score" and then aggregated using measure-specific weights. A reference mean score was set at 3, with scores interpreted in terms of standard deviations above or below the mean, with above reflecting better than average performance. Twenty-six measures were included in the score. The mean composite score for 2652 general acute care hospitals in the United States was 2.97 (range by hospital, 0.46-3.94). Safety scores were slightly lower for hospitals that were publicly owned, rural in location, or had a larger percentage of patients with Medicaid as their primary insurance. The Leapfrog patient safety composite provides a standardized method to evaluate patient safety in general acute care hospitals in the United States. While constrained by available data and publicly reported scores on patient safety measures, the composite score reflects the best available evidence regarding a hospital's efforts and outcomes in patient safety. Additional analyses are needed, but the score did not seem to have a strong bias against hospitals with specific characteristics. The composite score will continue to be refined over time as measures of patient safety evolve.

  17. Assessment of Safety Standards for Automotive Electronic Control Systems

    DOT National Transportation Integrated Search

    2016-06-01

    This report summarizes the results of a study that assessed and compared six industry and government safety standards relevant to the safety and reliability of automotive electronic control systems. These standards include ISO 26262 (Road Vehicles - ...

  18. Vehicle track interaction safety standards

    DOT National Transportation Integrated Search

    2014-04-02

    Vehicle/Track Interaction (VTI) Safety Standards aim to : reduce the risk of derailments and other accidents attributable : to the dynamic interaction between moving vehicles and the : track over which they operate. On March 13, 2013, the Federal : R...

  19. 78 FR 37706 - Safety Standards for Infant Walkers and Infant Swings

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-24

    ... Danny Keysar Child Product Safety Notification Act, if ASTM revises the underlying voluntary standard... CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Parts 1216 and 1223 Safety Standards for Infant Walkers... the Danny Keysar Child Product Safety Notification Act, the U.S. Consumer Product Safety Commission...

  20. Improving compliance with Occupational Safety and Health Administration standards.

    PubMed

    Cuming, Richard; Rocco, Tonette S; McEachern, Adriana G

    2008-02-01

    Health care facilities can be dangerous places. The mission of the Occupational Safety and Health Administration (OSHA) is to improve the safety of the American workplace by developing and implementing standards that prevent occupational injury, illness, and death. Perioperative services are performed in environments where exposure to bloodborne pathogens is a daily occurrence, making implementation and compliance with OSHA standards very important. Employees and employers must remain current with workplace safety requirements, including use of personal protective equipment. This article presents implications of the OSHA standards for employers, educators, and employees.

  1. Cultivating quality: implementing standardized reporting and safety checklists.

    PubMed

    Stevens, James D; Bader, Mary Kay; Luna, Michele A; Johnson, Linda M

    2011-05-01

    Developing processes to create a culture of safety. It's estimated that as many as 98,000 hospitalized patients lose their lives each year in the United States because of medical errors that could have been prevented. While standardized reporting and safety checklists have been shown to improve communication and patient safety, implementation of these tools in hospitals remains challenging. To implement standardized nurse-to-nurse reporting along with safety checklists at Mission Hospital, a 522-bed facility in Mission Viejo, California, using Lewin's change theory and Knowles's adult learning theory. Nurses were tested to assess their knowledge of the standardized nurse-to-physician reporting method called SBAR (Situation, Background, Assessment, Recommendation), their understanding of the concept of the nurse-to-nurse reporting method called SBAP (Situation, Background, Assessment, Plan), and the use of safety checklists. Then, after viewing a 22-minute educational video, they were retested. A total of 482 nurses completed the pretest and posttest. On the pretest, the nurses' mean score was 15.935 points (SD, 3.529) out of 20. On the posttest, the mean score was 18.94 (SD, 1.53) out of 20. A Wilcoxon matched-pairs signed-rank test was performed; the two-tailed P value was < 0.001. The application of Lewin's change theory and Knowles's adult learning theory was successful in the process of implementing standardized nurse-to-nurse reporting and safety checklists at Mission Hospital.

  2. Exploring factors influencing the strength of the safety-in-numbers effect.

    PubMed

    Elvik, Rune

    2017-03-01

    Several studies have found a so-called safety-in-numbers effect for vulnerable road users. This means that when the number of pedestrians or cyclists increases, the number of accidents involving these road users and motor vehicles increases less than in proportion to the number of pedestrians or cyclists. In other words, travel becomes safer for each pedestrian or cyclist the more pedestrians or cyclists there are. This finding is highly consistent, but estimates of the strength of the safety-in-numbers effect vary considerably. This paper shows that the strength of the safety-in-numbers effect is inversely related to the number of pedestrians and cyclists. A stronger safety-in-numbers is found when there are few pedestrians or cyclists than when there are many. This finding is counterintuitive and one would expect the opposite relationship. The relationship between the ratio of the number of motor vehicles to the number of pedestrians or cyclists and the strength of the safety-in-numbers effect is ambiguous. Possible explanations of these tendencies are discussed. Copyright © 2016 Elsevier Ltd. All rights reserved.

  3. Is it time to reassess current safety standards for glyphosate-based herbicides?

    PubMed Central

    Blumberg, Bruce; Antoniou, Michael N; Benbrook, Charles M; Carroll, Lynn; Colborn, Theo; Everett, Lorne G; Hansen, Michael; Landrigan, Philip J; Lanphear, Bruce P; Mesnage, Robin; vom Saal, Frederick S; Welshons, Wade V; Myers, John Peterson

    2017-01-01

    Use of glyphosate-based herbicides (GBHs) increased ∼100-fold from 1974 to 2014. Additional increases are expected due to widespread emergence of glyphosate-resistant weeds, increased application of GBHs, and preharvest uses of GBHs as desiccants. Current safety assessments rely heavily on studies conducted over 30 years ago. We have considered information on GBH use, exposures, mechanisms of action, toxicity and epidemiology. Human exposures to glyphosate are rising, and a number of in vitro and in vivo studies challenge the basis for the current safety assessment of glyphosate and GBHs. We conclude that current safety standards for GBHs are outdated and may fail to protect public health or the environment. To improve safety standards, the following are urgently needed: (1) human biomonitoring for glyphosate and its metabolites; (2) prioritisation of glyphosate and GBHs for hazard assessments, including toxicological studies that use state-of-the-art approaches; (3) epidemiological studies, especially of occupationally exposed agricultural workers, pregnant women and their children and (4) evaluations of GBHs in commercially used formulations, recognising that herbicide mixtures likely have effects that are not predicted by studying glyphosate alone. PMID:28320775

  4. 45 CFR 156.1110 - Establishment of patient safety standards for QHP issuers.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... STANDARDS RELATED TO EXCHANGES Quality Standards § 156.1110 Establishment of patient safety standards for QHP issuers. (a) Patient safety standards. A QHP issuer that contracts with a hospital with greater... 45 Public Welfare 1 2014-10-01 2014-10-01 false Establishment of patient safety standards for QHP...

  5. 78 FR 9623 - Federal Motor Vehicle Safety Standards; Air Brake Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-11

    ... [Docket No. NHTSA-2013-0011] RIN 2127-AL11 Federal Motor Vehicle Safety Standards; Air Brake Systems... rule that amended the Federal motor vehicle safety standard for air brake systems by requiring... published a final rule in the Federal Register amending Federal Motor Vehicle Safety Standard (FMVSS) No...

  6. Codex Alimentarius: food quality and safety standards for international trade.

    PubMed

    Randell, A W; Whitehead, A J

    1997-08-01

    Since 1962, the Codex Alimentarius Commission (CAC) of the Food and Agriculture Organisation/World Health Organisation has been responsible for developing standards, guidelines and other recommendations on the quality and safety of food to protect the health of consumers and to ensure fair practices in food trade. The mission of the CAC remains relevant, but a number of factors have shown the need for new techniques to form the basis of food standards, the most important of which is risk analysis. The authors give a brief description of the role and work of the CAC and the efforts deployed by the Commission to respond to the challenges posed by new approaches to government regulation, harmonisation of national requirements based on international standards and the role of civil society.

  7. Can a safety-in-numbers effect and a hazard-in-numbers effect co-exist in the same data?

    PubMed

    Elvik, Rune

    2013-11-01

    Safety-in-numbers denotes a non-linear relationship between exposure (traffic volume) and the number of accidents, characterised by declining risk as traffic volume increases. There is safety-in-numbers when the number of accidents increases less than proportional to traffic volume, e.g. a doubling of traffic volume is associated with less than a doubling of the number of accidents. Hazard-in-numbers, a less-used concept, refers to the opposite effect: the number of accidents increases more than in proportion to traffic volume, e.g. is more than doubled when traffic volume is doubled. This paper discusses whether a safety-in-numbers effect and a hazard-in-numbers effect can co-exist in the same data. It is concluded that both effects can exist in a given data set. The paper proposes to make a distinction between partial safety-in-numbers and complete safety-in-numbers. Another issue that has been raised in discussions about the safety-in-numbers effect is whether the effect found in some studies is an artefact created by the way exposure was measured. The paper discusses whether measuring exposure as a rate or a share, e.g. kilometres travelled per inhabitant per year, will generate a safety-in-numbers effect as a statistical artefact. It is concluded that this is the case. The preferred measure of exposure is a count of the number of road users. The count should not be converted to a rate or to the share any group of road user contribute to total traffic volume. Copyright © 2013 Elsevier Ltd. All rights reserved.

  8. OSHA Laboratory Standard: Driving Force for Laboratory Safety!

    ERIC Educational Resources Information Center

    Roy, Kenneth R.

    2000-01-01

    Discusses the Occupational Safety and Health Administration's (OSHA's) Laboratory Safety Standards as the major driving force in establishing and maintaining a safe working environment for teachers and students. (Author)

  9. 49 CFR 659.15 - System safety program standard.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... included in the affected rail transit agency's system safety program plan relating to the hazard management... 49 Transportation 7 2011-10-01 2011-10-01 false System safety program standard. 659.15 Section 659... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the...

  10. NREL Provides First-of-its-Kind Guidance Promoting Safety Standards for

    Science.gov Websites

    Promoting Safety Standards for Natural Gas Vehicle Maintenance Facilities NREL Provides First-of-its-Kind Guidance Promoting Safety Standards for Natural Gas Vehicle Maintenance Facilities December 1, 2017 The U.S vehicle maintenance facilities with a new handbook and webinar that outline safety factors and standards

  11. 49 CFR 231.33 - Procedure for special approval of existing industry safety appliance standards.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... specific number, dimension, location, and manner of application of each safety appliance contained in the industry standard; (3) Appropriate data or analysis, or both, for FRA to consider in determining whether..., inspection, testing, and maintenance under this part; (ii) Any organizations or bodies that either issued the...

  12. 49 CFR 231.33 - Procedure for special approval of existing industry safety appliance standards.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... specific number, dimension, location, and manner of application of each safety appliance contained in the industry standard; (3) Appropriate data or analysis, or both, for FRA to consider in determining whether..., inspection, testing, and maintenance under this part; (ii) Any organizations or bodies that either issued the...

  13. 49 CFR 231.33 - Procedure for special approval of existing industry safety appliance standards.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... specific number, dimension, location, and manner of application of each safety appliance contained in the industry standard; (3) Appropriate data or analysis, or both, for FRA to consider in determining whether..., inspection, testing, and maintenance under this part; (ii) Any organizations or bodies that either issued the...

  14. 49 CFR 231.33 - Procedure for special approval of existing industry safety appliance standards.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... specific number, dimension, location, and manner of application of each safety appliance contained in the industry standard; (3) Appropriate data or analysis, or both, for FRA to consider in determining whether..., inspection, testing, and maintenance under this part; (ii) Any organizations or bodies that either issued the...

  15. 50 CFR 600.355 - National Standard 10-Safety of Life at Sea.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 50 Wildlife and Fisheries 8 2010-10-01 2010-10-01 false National Standard 10-Safety of Life at Sea... Standards § 600.355 National Standard 10—Safety of Life at Sea. (a) Standard 10. Conservation and management measures shall, to the extent practicable, promote the safety of human life at sea. (b) General. (1...

  16. 16 CFR 1115.8 - Compliance with product safety standards.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... applicable mandatory consumer product safety standards and to report to the Commission any products which do.... 1115.8 Section 1115.8 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SUBSTANTIAL PRODUCT HAZARD REPORTS General Interpretation § 1115.8 Compliance with...

  17. 75 FR 22317 - Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-28

    ... 1300 [Docket No. NHTSA-2010-0054] Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety AGENCY: National Highway Traffic Safety Administration (NHTSA), Department of..., multipurpose passenger vehicles, trucks, buses, trailers, incomplete vehicles, motorcycles, and motor vehicle...

  18. 77 FR 69586 - Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-20

    ... [Docket No. NHTSA-2012-0155] Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety AGENCY: National Highway Traffic Safety Administration (NHTSA), Department of..., multipurpose passenger vehicles, trucks, buses, trailers, motorcycles, and motor vehicle equipment. DATES: You...

  19. Safety-in-numbers: Estimates based on a sample of pedestrian crossings in Norway.

    PubMed

    Elvik, Rune

    2016-06-01

    Safety-in-numbers denotes the tendency for the risk of accident for each road user to decline as the number of road users increases. Safety-in-numbers implies that a doubling of the number of road users will be associated with less than a doubling of the number of accidents. This paper investigates safety-in-numbers in 239 pedestrian crossings in Oslo and its suburbs. Accident prediction models were fitted by means of negative binomial regression. The models indicate a very strong safety-in-numbers effect. In the final model, the coefficients for traffic volume were 0.05 for motor vehicles, 0.07 for pedestrians and 0.12 for cyclists. The coefficient for motor vehicles implies that the number of accidents is almost independent of the number of motor vehicles. The safety-in-numbers effect found in this paper is stronger than reported in any other study dealing with safety-in-numbers. It should be noted that the model explained only 21% of the systematic variation in the number of accidents. It therefore cannot be ruled out that the results are influenced by omitted variable bias. Any such bias would, however, have to be very large to eliminate the safety-in-numbers effect. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. 78 FR 76265 - Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-17

    ... Through 578, Except Parts 571 and 575 [Docket No. NHTSA-2013-0116] Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety AGENCY: National Highway Traffic Safety Administration... passenger cars, multipurpose passenger vehicles, trucks, buses, trailers, motorcycles, and motor vehicle...

  1. 75 FR 76692 - Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-09

    ..., 510, 511, 512, 520, 523, 525, 526, and 571 [Docket No. NHTSA-2010-0159] Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety AGENCY: National Highway Traffic Safety... that specifically relate to passenger cars, multipurpose passenger vehicles, trucks, buses, trailers...

  2. Is it time to reassess current safety standards for glyphosate-based herbicides?

    PubMed

    Vandenberg, Laura N; Blumberg, Bruce; Antoniou, Michael N; Benbrook, Charles M; Carroll, Lynn; Colborn, Theo; Everett, Lorne G; Hansen, Michael; Landrigan, Philip J; Lanphear, Bruce P; Mesnage, Robin; Vom Saal, Frederick S; Welshons, Wade V; Myers, John Peterson

    2017-06-01

    Use of glyphosate-based herbicides (GBHs) increased ∼100-fold from 1974 to 2014. Additional increases are expected due to widespread emergence of glyphosate-resistant weeds, increased application of GBHs, and preharvest uses of GBHs as desiccants. Current safety assessments rely heavily on studies conducted over 30 years ago. We have considered information on GBH use, exposures, mechanisms of action, toxicity and epidemiology. Human exposures to glyphosate are rising, and a number of in vitro and in vivo studies challenge the basis for the current safety assessment of glyphosate and GBHs. We conclude that current safety standards for GBHs are outdated and may fail to protect public health or the environment. To improve safety standards, the following are urgently needed: (1) human biomonitoring for glyphosate and its metabolites; (2) prioritisation of glyphosate and GBHs for hazard assessments, including toxicological studies that use state-of-the-art approaches; (3) epidemiological studies, especially of occupationally exposed agricultural workers, pregnant women and their children and (4) evaluations of GBHs in commercially used formulations, recognising that herbicide mixtures likely have effects that are not predicted by studying glyphosate alone. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  3. 30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

  4. 30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

  5. 30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

  6. 30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

  7. 30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

  8. 76 FR 72888 - Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-28

    ... pedestrian safety devices. 571.217 Bus emergency exits and window retention and release. 571.220 School bus... DEPARTMENT OF TRANSPORTATION National Highway Traffic Safety Administration 49 CFR Part 571 [Docket No. NHTSA-2011-0160] Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor...

  9. 34 CFR 75.609 - Comply with safety and health standards.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 34 Education 1 2014-07-01 2014-07-01 false Comply with safety and health standards. 75.609 Section 75.609 Education Office of the Secretary, Department of Education DIRECT GRANT PROGRAMS What Conditions Must Be Met by a Grantee? Construction § 75.609 Comply with safety and health standards. In...

  10. 41 CFR 128-1.8005 - Seismic safety standards.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Seismic safety standards. 128-1.8005 Section 128-1.8005 Public Contracts and Property Management Federal Property Management Regulations System (Continued) DEPARTMENT OF JUSTICE 1-INTRODUCTION 1.80-Seismic Safety Program § 128-1.8005...

  11. Consumer Product Safety Commission. Consumer Education Efforts for Revised Children's Sleepwear Safety Standard.

    ERIC Educational Resources Information Center

    General Accounting Office, Washington, DC. Health, Education, and Human Services Div.

    A study examined the type and extent of consumer education that occurred since the Consumer Product Safety Commission (CPSC) amended the 1972 federal safety standards (effective January 1997) to permit marketing of snug-fitting, nonflame-resistant cotton garments as sleepwear. Three voluntary point-of-sale (POS) practices recognized as important…

  12. Connoted hazard and perceived importance of fluorescent, neon, and standard safety colors.

    PubMed

    Zielinska, O A; Mayhorn, C B; Wogalter, M S

    2017-11-01

    The perceived hazard and rated importance of standard safety, fluorescent, and neon colors are investigated. Colors are used in warnings to enhance hazard communication. Red has consistently been rated as the highest in perceived hazard. Orange, yellow, and black are the next highest in connoted hazard; however, there is discrepancy in their ordering. Safety standards, such as ANSI Z535.1, also list colors to convey important information, but little research has examined the perceived importance of colors. In addition to standard safety colors, fluorescent colors are more commonly used in warnings. Understanding hazard and importance perceptions of standard safety and fluorescent colors is necessary to create effective warnings. Ninety participants rated and ranked a total of 33 colors on both perceived hazard and perceived importance. Rated highest were the safety red colors from the American National Standard Institute (ANSI), International Organization for Standardization (ISO), and Federal Highway Administration (FHWA) together with three fluorescent colors (orange, yellow, and yellow-green) from 3 M on both dimensions. Rankings were similar to ratings except that fluorescent orange was the highest on perceived hazard, while fluorescent orange and safety red from the ANSI were ranked as the highest in perceived importance. Fluorescent colors convey hazard and importance levels as high as the standard safety red colors. Implications for conveying hazard and importance in warnings through color are discussed. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. 30 CFR 6.30 - MSHA listing of equivalent non-MSHA product safety standards.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false MSHA listing of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.30 MSHA listing of equivalent non-MSHA product safety standards. MSHA evaluated the following non-MSHA product safety standards and determined that they provide...

  14. 30 CFR 6.30 - MSHA listing of equivalent non-MSHA product safety standards.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false MSHA listing of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.30 MSHA listing of equivalent non-MSHA product safety standards. MSHA evaluated the following non-MSHA product safety standards and determined that they provide...

  15. 30 CFR 6.30 - MSHA listing of equivalent non-MSHA product safety standards.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false MSHA listing of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.30 MSHA listing of equivalent non-MSHA product safety standards. MSHA evaluated the following non-MSHA product safety standards and determined that they provide...

  16. 30 CFR 6.30 - MSHA listing of equivalent non-MSHA product safety standards.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false MSHA listing of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.30 MSHA listing of equivalent non-MSHA product safety standards. MSHA evaluated the following non-MSHA product safety standards and determined that they provide...

  17. 30 CFR 6.30 - MSHA listing of equivalent non-MSHA product safety standards.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false MSHA listing of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.30 MSHA listing of equivalent non-MSHA product safety standards. MSHA evaluated the following non-MSHA product safety standards and determined that they provide...

  18. 19 CFR 12.85 - Coast Guard boat and associated equipment safety standards.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 19 Customs Duties 1 2012-04-01 2012-04-01 false Coast Guard boat and associated equipment safety... SECURITY; DEPARTMENT OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Safety Standards for Boats and Associated Equipment § 12.85 Coast Guard boat and associated equipment safety standards. (a) Applicability of...

  19. 19 CFR 12.85 - Coast Guard boat and associated equipment safety standards.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 19 Customs Duties 1 2013-04-01 2013-04-01 false Coast Guard boat and associated equipment safety... SECURITY; DEPARTMENT OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Safety Standards for Boats and Associated Equipment § 12.85 Coast Guard boat and associated equipment safety standards. (a) Applicability of...

  20. 19 CFR 12.85 - Coast Guard boat and associated equipment safety standards.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 19 Customs Duties 1 2014-04-01 2014-04-01 false Coast Guard boat and associated equipment safety... SECURITY; DEPARTMENT OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Safety Standards for Boats and Associated Equipment § 12.85 Coast Guard boat and associated equipment safety standards. (a) Applicability of...

  1. 19 CFR 12.85 - Coast Guard boat and associated equipment safety standards.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 1 2011-04-01 2011-04-01 false Coast Guard boat and associated equipment safety... SECURITY; DEPARTMENT OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Safety Standards for Boats and Associated Equipment § 12.85 Coast Guard boat and associated equipment safety standards. (a) Applicability of...

  2. 19 CFR 12.85 - Coast Guard boat and associated equipment safety standards.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Coast Guard boat and associated equipment safety... SECURITY; DEPARTMENT OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Safety Standards for Boats and Associated Equipment § 12.85 Coast Guard boat and associated equipment safety standards. (a) Applicability of...

  3. 76 FR 55825 - Federal Motor Vehicle Safety Standards, Child Restraint Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-09

    ... [Docket No. NHTSA-2011-0139] RIN 2127-AJ44 Federal Motor Vehicle Safety Standards, Child Restraint Systems..., amends a provision in Federal Motor Vehicle Safety Standard No. 213, ``Child restraint systems,'' that... forces, accelerations, moments and deflections, which are crucial in evaluating vehicle occupant...

  4. 75 FR 15620 - Federal Motor Vehicle Safety Standards; Air Brake Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-30

    ... fully develop improved brake systems and also to ensure vehicle control and stability while braking... [Docket No. NHTSA 2009-0175] RIN 2127-AK62 Federal Motor Vehicle Safety Standards; Air Brake Systems... Federal motor vehicle safety standard for air brake systems by requiring substantial improvements in...

  5. New conducted electrical weapons: Electrical safety relative to relevant standards.

    PubMed

    Panescu, Dorin; Nerheim, Max; Kroll, Mark W; Brave, Michael A

    2017-07-01

    We have previously published about TASER ® conducted electrical weapons (CEW) compliance with international standards. CEWs deliver electrical pulses that can inhibit a person's neuromuscular control or temporarily incapacitate. An eXperimental Rotating-Field (XRF) waveform CEW and the X2 CEW are new 2-shot electrical weapon models designed to target a precise amount of delivered charge per pulse. They both can deploy 1 or 2 dart pairs, delivered by 2 separate cartridges. Additionally, the XRF controls delivery of incapacitating pulses over 4 field vectors, in a rotating sequence. As in our previous study, we were motivated by the need to understand the cardiac safety profile of these new CEWs. The goal of this paper is to analyze the nominal electrical outputs of TASER XRF and X2 CEWs in reference to provisions of all relevant international standards that specify safety requirements for electrical medical devices and electrical fences. Although these standards do not specifically mention CEWs, they are the closest electrical safety standards and hence give very relevant guidance. The outputs of several TASER XRF and X2 CEWs were measured under normal operating conditions. The measurements were compared against manufacturer specifications. CEWs electrical output parameters were reviewed against relevant safety requirements of UL 69, IEC 60335-2-76 Ed 2.1, IEC 60479-1, IEC 60479-2, AS/NZS 60479.1, AS/NZS 60479.2, IEC 60601-1 and BS EN 60601-1. Our study confirmed that the nominal electrical outputs of TASER XRF and X2 CEWs lie within safety bounds specified by relevant standards.

  6. ASME Nuclear Crane Standards for Enhanced Crane Safety and Increased Profit

    NASA Astrophysics Data System (ADS)

    Parkhurst, Stephen N.

    2000-01-01

    The ASME NOG-1 standard, 'Rules for Construction of Overhead and Gantry Cranes', covers top running cranes for nuclear facilities; with the ASME NUM-1 standard, 'Rules for Construction of Cranes, Monorails, and Hoists', covering the single girder, underhung, wall and jib cranes, as well as the monorails and hoists. These two ASME nuclear crane standards provide criteria for designing, inspecting and testing overhead handling equipment with enhanced safety to meet the 'defense-in-depth' approach of the United States Nuclear Regulatory Commission (USNRC) documents NUREG 0554 and NUREG 0612. In addition to providing designs for enhanced safety, the ASME nuclear crane standards provide a basis for purchasing overhead handling equipment with standard safety features, based upon accepted engineering principles, and including performance and environmental parameters specific to nuclear facilities. The ASME NOG-1 and ASME NUM-1 standards not only provide enhanced safety for handling a critical load, but also increase profit by minimizing the possibility of load drops, by reducing cumbersome operating restrictions, and by providing the foundation for a sound licensing position. The ASME nuclear crane standards can also increase profit by providing the designs and information to help ensure that the right standard equipment is purchased. Additionally, the ASME nuclear crane standards can increase profit by providing designs and information to help address current issues, such as the qualification of nuclear plant cranes for making 'planned engineered lifts' for steam generator replacement and decommissioning.

  7. 76 FR 57635 - Restrictions on Operators Employing Former Flight Standards Service Aviation Safety Inspectors...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-16

    ... Standards Service Aviation Safety Inspectors; Correction AGENCY: Federal Aviation Administration (FAA), DOT... ``Restrictions on Operators Employing Former Flight Standards Service Aviation Safety Inspectors'' (76 FR 52231... of, a Flight Standards Service Aviation Safety Inspector, and had direct responsibility to inspect...

  8. 76 FR 44829 - Federal Motor Vehicle Safety Standards; Air Brake Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-27

    ... [Docket No. NHTSA-2009-0175] RIN 2127-AK84 Federal Motor Vehicle Safety Standards; Air Brake Systems... final rule that amended the Federal motor vehicle safety standard for air brake systems by requiring... July 27, 2009, NHTSA published a final rule in the Federal Register amending Federal Motor Vehicle...

  9. 50 CFR 600.355 - National Standard 10-Safety of Life at Sea.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Sea. 600.355 Section 600.355 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL... Standards § 600.355 National Standard 10—Safety of Life at Sea. (a) Standard 10. Conservation and management measures shall, to the extent practicable, promote the safety of human life at sea. (b) General. (1...

  10. Safety Standards Plan for Middlesex County Vocational & Technical High Schools.

    ERIC Educational Resources Information Center

    Sommer, Cy

    This vocational education safety standards plan outlines rules and regulations adopted by the Board of Education of Middlesex County Vocational and Technical High Schools. The first of eleven chapters presents demographics and a safety organization table for Middlesex County Vocational and Technical Schools. In chapter 2, six safety program…

  11. 32 CFR 732.26 - Standard document numbers.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 32 National Defense 5 2011-07-01 2011-07-01 false Standard document numbers. 732.26 Section 732.26 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY PERSONNEL NONNAVAL MEDICAL AND DENTAL CARE Accounting Classifications for Nonnaval Medical and Dental Care Expenses and Standard...

  12. 32 CFR 732.26 - Standard document numbers.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 32 National Defense 5 2013-07-01 2013-07-01 false Standard document numbers. 732.26 Section 732.26 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY PERSONNEL NONNAVAL MEDICAL AND DENTAL CARE Accounting Classifications for Nonnaval Medical and Dental Care Expenses and Standard...

  13. 32 CFR 732.26 - Standard document numbers.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 5 2010-07-01 2010-07-01 false Standard document numbers. 732.26 Section 732.26 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY PERSONNEL NONNAVAL MEDICAL AND DENTAL CARE Accounting Classifications for Nonnaval Medical and Dental Care Expenses and Standard...

  14. 32 CFR 732.26 - Standard document numbers.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 32 National Defense 5 2014-07-01 2014-07-01 false Standard document numbers. 732.26 Section 732.26 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY PERSONNEL NONNAVAL MEDICAL AND DENTAL CARE Accounting Classifications for Nonnaval Medical and Dental Care Expenses and Standard...

  15. 32 CFR 732.26 - Standard document numbers.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 32 National Defense 5 2012-07-01 2012-07-01 false Standard document numbers. 732.26 Section 732.26 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY PERSONNEL NONNAVAL MEDICAL AND DENTAL CARE Accounting Classifications for Nonnaval Medical and Dental Care Expenses and Standard...

  16. Health and Safety Checklist for Early Care and Education Programs to Assess Key National Health and Safety Standards.

    PubMed

    Alkon, Abbey; Rose, Roberta; Wolff, Mimi; Kotch, Jonathan B; Aronson, Susan S

    2016-01-01

    The project aims were to (1) develop an observational Health and Safety Checklist to assess health and safety practices and conditions in early care and education (ECE) programs using Stepping Stones To Caring For Our Children, 3rd Edition national standards, (2) pilot test the Checklist, completed by nurse child care health consultants, to assess feasibility, ease of completion, objectivity, validity, and reliability, and (3) revise the Checklist based on the qualitative and quantitative results of the pilot study. The observable national health and safety standards were identified and then rated by health, safety, and child care experts using a Delphi technique to validate the standards as essential to prevent harm and promote health. Then, child care health consultants recruited ECE centers and pilot tested the 124-item Checklist. The pilot study was conducted in Arizona, California and North Carolina. The psychometric properties of the Checklist were assessed. The 37 participating ECE centers had 2627 children from ethnically-diverse backgrounds and primarily low-income families. The child care health consultants found the Checklist easy to complete, objective, and useful for planning health and safety interventions. The Checklist had content and face validity, inter-rater reliability, internal consistency, and concurrent validity. Based on the child care health consultant feedback and psychometric properties of the Checklist, the Checklist was revised and re-written at an 8th grade literacy level. The Health and Safety Checklist provides a standardized instrument of observable, selected national standards to assess the quality of health and safety in ECE centers.

  17. 75 FR 6123 - Federal Motor Vehicle Safety Standards; Occupant Crash Protection

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-08

    ... motor vehicle safety standard is in effect under this chapter, a State or a political subdivision of a... [Docket No. NHTSA-2009-0156] RIN 2127-AK57 Federal Motor Vehicle Safety Standards; Occupant Crash...'s response to petitions for reconsideration of a November 12, 2008 final rule that amended the child...

  18. 48 CFR 22.403-3 - Contract Work Hours and Safety Standards Act.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Contract Work Hours and... Standards for Contracts Involving Construction 22.403-3 Contract Work Hours and Safety Standards Act. The Contract Work Hours and Safety Standards Act (40 U.S.C. 3701 et seq.) requires that certain contracts (see...

  19. 49 CFR 229.105 - Steam generator number.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Steam generator number. 229.105 Section 229.105..., DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Safety Requirements Steam Generators § 229.105 Steam generator number. An identification number shall be marked on the steam generator's...

  20. 29 CFR 1960.19 - Other Federal agency standards affecting occupational safety and health.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... safety and health. 1960.19 Section 1960.19 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Standards § 1960.19 Other Federal agency standards affecting occupational safety and health. (a) Where employees of different agencies...

  1. 29 CFR 1960.19 - Other Federal agency standards affecting occupational safety and health.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... safety and health. 1960.19 Section 1960.19 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Standards § 1960.19 Other Federal agency standards affecting occupational safety and health. (a) Where employees of different agencies...

  2. 29 CFR 1960.19 - Other Federal agency standards affecting occupational safety and health.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... safety and health. 1960.19 Section 1960.19 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Standards § 1960.19 Other Federal agency standards affecting occupational safety and health. (a) Where employees of different agencies...

  3. Labor Standards and Safety Division, Alaska Department of Labor

    Science.gov Websites

    Deborah Kelly, Director The mission of Labor Standards and Safety is to ensure safe and legal working of state and federal standards, and by training employers and employees to follow safe and healthful

  4. Administrative goals and safety standards for hazard control on forested recreation sites

    Treesearch

    Lee A. Paine

    1973-01-01

    For efficient control of tree hazard on recreation sites, a specific administrative goal must be selected. A safety standard designed to achieve the selected goal and a uniform hazard-rating procedure will then promote a consistent level of safety at an acceptable cost. Safety standards can be established with the aid of data for past years, and dollar evaluations are...

  5. Voluntary Product Standard PS 72-76: Toy Safety.

    ERIC Educational Resources Information Center

    National Bureau of Standards (DOC), Washington, DC.

    The purpose of this voluntary product standard is to establish nationally recognized safety requirements and test methods for toys intended for use by children in age groups through 14 years. The standard relates to possible hazards that may not be readily recognized and which may be encountered in,normal use or after reasonably foreseeable abuse.…

  6. Planning the Unplanned Experiment: Assessing the Efficacy of Standards for Safety Critical Software

    NASA Technical Reports Server (NTRS)

    Graydon, Patrick J.; Holloway, C. Michael

    2015-01-01

    We need well-founded means of determining whether software is t for use in safety-critical applications. While software in industries such as aviation has an excellent safety record, the fact that software aws have contributed to deaths illustrates the need for justi ably high con dence in software. It is often argued that software is t for safety-critical use because it conforms to a standard for software in safety-critical systems. But little is known about whether such standards `work.' Reliance upon a standard without knowing whether it works is an experiment; without collecting data to assess the standard, this experiment is unplanned. This paper reports on a workshop intended to explore how standards could practicably be assessed. Planning the Unplanned Experiment: Assessing the Ecacy of Standards for Safety Critical Software (AESSCS) was held on 13 May 2014 in conjunction with the European Dependable Computing Conference (EDCC). We summarize and elaborate on the workshop's discussion of the topic, including both the presented positions and the dialogue that ensued.

  7. 29 CFR 500.102 - Applicability of vehicle safety standards.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 3 2011-07-01 2011-07-01 false Applicability of vehicle safety standards. 500.102 Section 500.102 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR REGULATIONS MIGRANT AND SEASONAL AGRICULTURAL WORKER PROTECTION Motor Vehicle Safety and Insurance for Transportation of Migrant and Seasonal...

  8. Radiation safety standards and their application: international policies and current issues.

    PubMed

    González, Abel J

    2004-09-01

    This paper briefly describes the current policies of the United Nations Scientific Committee on the Effects of Atomic Radiation and the International Commission on Radiological Protection and how these policies are converted into international radiation safety standards by the International Atomic Energy Agency, which is the only global organization-within the United Nations family of international agencies-with a statutory mandate not only to establish such standards but also to provide for their application. It also summarizes the current status of the established corpus of such international standards, and of it foreseeable evolution, as well as of legally binding undertakings by countries around the world that are linked to these standards. Moreover, this paper also reviews some major current global issues related to the application of international standards, including the following: strengthening of national infrastructures for radiation safety, including technical cooperation programs for assisting developing countries; occupational radiation safety challenges, including the protection of pregnant workers and their unborn children, dealing with working environments with high natural radiation levels, and occupational attributability of health effects (probability of occupational causation); restricting discharges of radioactive substances into the environment: reviewing current international policies vis-a-vis the growing concern on the radiation protection of the "environment;" radiological protection of patients undergoing radiodiagnostic and radiotherapeutic procedures: the current International Action Plan; safety and security of radiation sources: post-11 September developments; preparedness and response to radiation emergencies: enhancing the international network; safe transport of radioactive materials: new apprehensions; safety of radioactive waste management: concerns and connections with radiation protection; and radioactive residues remaining

  9. Standard random number generation for MBASIC

    NASA Technical Reports Server (NTRS)

    Tausworthe, R. C.

    1976-01-01

    A machine-independent algorithm is presented and analyzed for generating pseudorandom numbers suitable for the standard MBASIC system. The algorithm used is the polynomial congruential or linear recurrence modulo 2 method. Numbers, formed as nonoverlapping adjacent 28-bit words taken from the bit stream produced by the formula a sub m + 532 = a sub m + 37 + a sub m (modulo 2), do not repeat within the projected age of the solar system, show no ensemble correlation, exhibit uniform distribution of adjacent numbers up to 19 dimensions, and do not deviate from random runs-up and runs-down behavior.

  10. 49 CFR Appendix C to Part 238 - Suspension System Safety Performance Standards

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Suspension System Safety Performance Standards C Appendix C to Part 238 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PASSENGER EQUIPMENT SAFETY STANDARDS Pt. 238, App. C...

  11. 76 FR 29333 - Pipeline Safety: Meetings of the Technical Pipeline Safety Standards Committee and the Technical...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-20

    ... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No... Technical Hazardous Liquid Pipeline Safety Standards Committee AGENCY: Pipeline and Hazardous Materials... for natural gas pipelines and for hazardous liquid pipelines. Both committees were established under...

  12. Baryon number, lepton number, and operator dimension in the Standard Model

    DOE PAGES

    Kobach, Andrew

    2016-05-19

    In this study, we prove that for a given operator in the Standard Model (SM) with baryon number ΔB and lepton number ΔL, that the operator's dimension is even (odd) if (ΔB - ΔL)/2 is even (odd). Consequently, this establishes the veracity of statements that were long observed or expected to be true, but not proven, e.g., operators with ΔB - ΔL = 0 are of even dimension, ΔB - ΔL must be an even number, etc. These results remain true even if the SM is augmented by any number of right-handed neutrinos with ΔL = 1.

  13. NASA safety standard for lifting devices and equipment

    NASA Astrophysics Data System (ADS)

    1990-09-01

    NASA's minimum safety requirements are established for the design, testing, inspection, maintenance, certification, and use of overhead and gantry cranes (including top running monorail, underhung, and jib cranes), mobile cranes, derrick hoists, and special hoist supported personnel lifting devices (these do not include elevators, ground supported personnel lifts, or powered platforms). Minimum requirements are also addressed for the testing, inspection, and use of Hydra-sets, hooks, and slings. Safety standards are thoroughly detailed.

  14. NASA safety standard for lifting devices and equipment

    NASA Technical Reports Server (NTRS)

    1990-01-01

    NASA's minimum safety requirements are established for the design, testing, inspection, maintenance, certification, and use of overhead and gantry cranes (including top running monorail, underhung, and jib cranes), mobile cranes, derrick hoists, and special hoist supported personnel lifting devices (these do not include elevators, ground supported personnel lifts, or powered platforms). Minimum requirements are also addressed for the testing, inspection, and use of Hydra-sets, hooks, and slings. Safety standards are thoroughly detailed.

  15. Patient Safety: Moving the Bar in Prison Health Care Standards

    PubMed Central

    Greifinger, Robert B.; Mellow, Jeff

    2010-01-01

    Improvements in community health care quality through error reduction have been slow to transfer to correctional settings. We convened a panel of correctional experts, which recommended 60 patient safety standards focusing on such issues as creating safety cultures at organizational, supervisory, and staff levels through changes to policy and training and by ensuring staff competency, reducing medication errors, encouraging the seamless transfer of information between and within practice settings, and developing mechanisms to detect errors or near misses and to shift the emphasis from blaming staff to fixing systems. To our knowledge, this is the first published set of standards focusing on patient safety in prisons, adapted from the emerging literature on quality improvement in the community. PMID:20864714

  16. 21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

  17. 21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

  18. 21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

  19. 21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

  20. 21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

  1. Michigan safety belt use immediately following implementation of standard enforcement

    DOT National Transportation Integrated Search

    2000-05-01

    Reported here are the results of a direct observation survey of safety belt use conducted in March 2000 to determine the effect the implementation of standard enforcement legislation has had on Michigan's safety belt use rate. In this study, 11,687 o...

  2. Complying with the Occupational Safety and Health Administration's Bloodborne Pathogens Standard: implementing needleless systems and intravenous safety devices.

    PubMed

    Marini, Michelle A; Giangregorio, Maeve; Kraskinski, Joanna C

    2004-03-01

    Preventing the transmission of bloodborne pathogens to healthcare workers has been a mission and a challenge of the healthcare industry for over 20 years. The development of the Occupational Safety and Health Administration Bloodborne Pathogens Standard in 1991 and the passing of the Needlestick Safety Act in 2000 mandated hospitals to develop an Exposure Control Plan to protect workers from these pathogens. Children's Hospital Boston began implementation of a needleless system in 1993. Employees readily accepted these systems into practice, because they were convenient and easy to use. A marked decrease in exposures to bloodborne pathogens naturally followed, which is consistent with the national data. The transition to intravenous (i.v.) safety devices at Children's Hospital began in 2000 and proved to be more of a challenge. First, the clinicians must choose a safety product, which requires developing and implementing a trial plan with potential catheters. This selection process is especially difficult in pediatrics where successful placement of the smallest-gauge catheter, no. 24, is imperative. After choosing an i.v. safety product, successful transition is dependent upon the thoroughness of i.v. safety device training and a commitment by the clinicians to the use of these products. Although the number of needlestick injuries and subsequent transmission of bloodborne pathogens have been further reduced with the use of i.v. safety devices, needlestick injuries still occur. This results from a lack of familiarity with the engineering of the device and therefore poor technique or a failure to activate the safety mechanism. Staff resistance due to loss of expertise with the new device and patient care concerns are additional barriers to the use of these new products. Addressing these obstacles and providing adequate training for all clinicians were required for successful implementation of these i.v. safety devices.

  3. 78 FR 52848 - Occupational Safety and Health Standards for Aircraft Cabin Crewmembers

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-27

    ... [Docket No.: FAA-2012-0953] Occupational Safety and Health Standards for Aircraft Cabin Crewmembers AGENCY... regulation of some occupational safety and health conditions affecting cabin crewmembers on aircraft by the Occupational Safety and Health Administration. This policy statement will enhance occupational safety and...

  4. 29 CFR 500.103 - Activities not subject to vehicle safety standards.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 3 2011-07-01 2011-07-01 false Activities not subject to vehicle safety standards. 500.103... LABOR REGULATIONS MIGRANT AND SEASONAL AGRICULTURAL WORKER PROTECTION Motor Vehicle Safety and Insurance for Transportation of Migrant and Seasonal Agricultural Workers, Housing Safety and Health for Migrant...

  5. 29 CFR 500.103 - Activities not subject to vehicle safety standards.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Activities not subject to vehicle safety standards. 500.103... LABOR REGULATIONS MIGRANT AND SEASONAL AGRICULTURAL WORKER PROTECTION Motor Vehicle Safety and Insurance for Transportation of Migrant and Seasonal Agricultural Workers, Housing Safety and Health for Migrant...

  6. 76 FR 52231 - Restrictions on Operators Employing Former Flight Standards Service Aviation Safety Inspectors

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-22

    ... Standards Service Aviation Safety Inspectors AGENCY: Federal Aviation Administration (FAA), DOT. ACTION... responsible for the oversight of, a Flight Standards Service Aviation Safety Inspector, and had direct... . SUPPLEMENTARY INFORMATION: Authority for This Rulemaking The FAA's authority to issue rules on aviation safety...

  7. 78 FR 18965 - Submission for OMB Review; Comment Request: Safety Standard for Cigarette Lighters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-28

    ... Request: Safety Standard for Cigarette Lighters AGENCY: Consumer Product Safety Commission. ACTION: Notice... Commission's safety standard for cigarette lighters, 16 CFR part 1210. DATES: Written comments on this... Cigarette Lighters, 16 CFR part 1210. One comment was received in response to that notice. The commenter...

  8. Standards Guidelines. Safety in Oregon Schools. OAR 581-22-706.

    ERIC Educational Resources Information Center

    Oregon State Dept. of Education, Salem.

    This document contains guidelines that help Oregon schools meet the components of Oregon Administrative Rule 581-22-706, Emergency Plans and Safety Programs. The standard mandates that Oregon schools shall maintain a comprehensive safety program for all employees and students. School districts may alter the guidelines provided in this guidebook to…

  9. Evaluating the Safety In Numbers effect for pedestrians at urban intersections.

    PubMed

    Murphy, Brendan; Levinson, David M; Owen, Andrew

    2017-09-01

    Assessment of collision risk between pedestrians and automobiles offers a powerful and informative tool in urban planning applications, and can be leveraged to inform proper placement of improvements and treatment projects to improve pedestrian safety. Such assessment can be performed using existing datasets of crashes, pedestrian counts, and automobile traffic flows to identify intersections or corridors characterized by elevated collision risks to pedestrians. The Safety In Numbers phenomenon, which refers to the observable effect that pedestrian safety is positively correlated with increased pedestrian traffic in a given area (i.e. that the individual per-pedestrian risk of a collision decreases with additional pedestrians), is a readily observed phenomenon that has been studied previously, though its directional causality is not yet known. A sample of 488 intersections in Minneapolis were analyzed, and statistically-significant log-linear relationships between pedestrian traffic flows and the per-pedestrian crash risk were found, indicating the Safety In Numbers effect. Potential planning applications of this analysis framework towards improving pedestrian safety in urban environments are discussed. Copyright © 2017 Elsevier Ltd. All rights reserved.

  10. 2016 Updated American Society of Clinical Oncology/Oncology Nursing Society Chemotherapy Administration Safety Standards, Including Standards for Pediatric Oncology.

    PubMed

    Neuss, Michael N; Gilmore, Terry R; Belderson, Kristin M; Billett, Amy L; Conti-Kalchik, Tara; Harvey, Brittany E; Hendricks, Carolyn; LeFebvre, Kristine B; Mangu, Pamela B; McNiff, Kristen; Olsen, MiKaela; Schulmeister, Lisa; Von Gehr, Ann; Polovich, Martha

    2016-12-01

    Purpose To update the ASCO/Oncology Nursing Society (ONS) Chemotherapy Administration Safety Standards and to highlight standards for pediatric oncology. Methods The ASCO/ONS Chemotherapy Administration Safety Standards were first published in 2009 and updated in 2011 to include inpatient settings. A subsequent 2013 revision expanded the standards to include the safe administration and management of oral chemotherapy. A joint ASCO/ONS workshop with stakeholder participation, including that of the Association of Pediatric Hematology Oncology Nurses and American Society of Pediatric Hematology/Oncology, was held on May 12, 2015, to review the 2013 standards. An extensive literature search was subsequently conducted, and public comments on the revised draft standards were solicited. Results The updated 2016 standards presented here include clarification and expansion of existing standards to include pediatric oncology and to introduce new standards: most notably, two-person verification of chemotherapy preparation processes, administration of vinca alkaloids via minibags in facilities in which intrathecal medications are administered, and labeling of medications dispensed from the health care setting to be taken by the patient at home. The standards were reordered and renumbered to align with the sequential processes of chemotherapy prescription, preparation, and administration. Several standards were separated into their respective components for clarity and to facilitate measurement of adherence to a standard. Conclusion As oncology practice has changed, so have chemotherapy administration safety standards. Advances in technology, cancer treatment, and education and training have prompted the need for periodic review and revision of the standards. Additional information is available at http://www.asco.org/chemo-standards .

  11. 77 FR 71752 - Federal Motor Vehicle Safety Standards; Lamps, Reflective Devices, and Associated Equipment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-04

    ... [Docket No. NHTSA-2012-0174] RIN 2127-Al27 Federal Motor Vehicle Safety Standards; Lamps, Reflective... less than 30 feet in overall length, to the Federal motor vehicle safety standard (FMVSS) on lamps... final rule reorganizing the standard on December 4, 2007. DATES: Comments to this proposal must be...

  12. 77 FR 76005 - Submission for OMB Review; Comment Request-Safety Standard for Walk-Behind Power Lawn Mowers

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-26

    ... Request--Safety Standard for Walk-Behind Power Lawn Mowers AGENCY: Consumer Product Safety Commission... with the Commission's safety standard for walk- behind power lawn mowers. DATES: Written comments on... of approval of the collection of information required in the Safety Standard for Walk-Behind Power...

  13. An overview of revised NASA safety standard 1740.14

    NASA Technical Reports Server (NTRS)

    Reynolds, Robert; Eichler, Peter; Johnson, Nicholas

    1997-01-01

    Following a broad review of the debris control guidelines outside of NASA and according to additional feedback on the guidelines from within NASA, revisions were made to the NASA safety standard 1740.14. The NASA policy to limit the generation of orbital debris on NASA missions, stated in the NASA management instruction 1700.8 and implemented in the form of the NASA safety standard (NSS) 1740.14 is described together with the revisions implemented. The overall direction of the guidelines is the same, but the details of many of the guidelines were changed, including: changes for tether programs and for the control of operational debris. The NASA will continue to review the guidelines as new measurements and improved models of the environment are obtained.

  14. 76 FR 18073 - Track Safety Standards; Concrete Crossties

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-01

    ... metrics would be undesirable and restrict certain fastener assembly designs and capabilities to control... Track Safety Standards Working Group IV. FRA's Approach to Concrete Crossties A. Rail Cant B. Automated... and non-compliant track geometry can cause high- concentrated non-uniform dynamic loading, usually...

  15. Lepton number violation in theories with a large number of standard model copies

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kovalenko, Sergey; Schmidt, Ivan; Paes, Heinrich

    2011-03-01

    We examine lepton number violation (LNV) in theories with a saturated black hole bound on a large number of species. Such theories have been advocated recently as a possible solution to the hierarchy problem and an explanation of the smallness of neutrino masses. On the other hand, the violation of the lepton number can be a potential phenomenological problem of this N-copy extension of the standard model as due to the low quantum gravity scale black holes may induce TeV scale LNV operators generating unacceptably large rates of LNV processes. We show, however, that this issue can be avoided bymore » introducing a spontaneously broken U{sub 1(B-L)}. Then, due to the existence of a specific compensation mechanism between contributions of different Majorana neutrino states, LNV processes in the standard model copy become extremely suppressed with rates far beyond experimental reach.« less

  16. 76 FR 51058 - Petitions for Modification of Application of Existing Mandatory Safety Standards

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-17

    ... CFR part 48 training plan to the Metal/ Nonmetal Safety and Health District Manager. In addition to... DEPARTMENT OF LABOR Mine Safety and Health Administration Petitions for Modification of Application of Existing Mandatory Safety Standards AGENCY: Mine Safety and Health Administration, Labor...

  17. 48 CFR 1352.271-82 - Department of Labor occupational safety and health standards for ship repair.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... occupational safety and health standards for ship repair. 1352.271-82 Section 1352.271-82 Federal Acquisition... of Provisions and Clauses 1352.271-82 Department of Labor occupational safety and health standards... Occupational Safety and Health Standards for Ship Repair (APR 2010) The contractor, in performance of all work...

  18. 48 CFR 1352.271-82 - Department of Labor occupational safety and health standards for ship repair.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... occupational safety and health standards for ship repair. 1352.271-82 Section 1352.271-82 Federal Acquisition... of Provisions and Clauses 1352.271-82 Department of Labor occupational safety and health standards... Occupational Safety and Health Standards for Ship Repair (APR 2010) The contractor, in performance of all work...

  19. 48 CFR 1352.271-82 - Department of Labor occupational safety and health standards for ship repair.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... occupational safety and health standards for ship repair. 1352.271-82 Section 1352.271-82 Federal Acquisition... of Provisions and Clauses 1352.271-82 Department of Labor occupational safety and health standards... Occupational Safety and Health Standards for Ship Repair (APR 2010) The contractor, in performance of all work...

  20. 48 CFR 1352.271-82 - Department of Labor occupational safety and health standards for ship repair.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... occupational safety and health standards for ship repair. 1352.271-82 Section 1352.271-82 Federal Acquisition... of Provisions and Clauses 1352.271-82 Department of Labor occupational safety and health standards... Occupational Safety and Health Standards for Ship Repair (APR 2010) The contractor, in performance of all work...

  1. 48 CFR 1352.271-82 - Department of Labor occupational safety and health standards for ship repair.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... occupational safety and health standards for ship repair. 1352.271-82 Section 1352.271-82 Federal Acquisition... of Provisions and Clauses 1352.271-82 Department of Labor occupational safety and health standards... Occupational Safety and Health Standards for Ship Repair (APR 2010) The contractor, in performance of all work...

  2. 76 FR 69764 - Petitions for Modification of Application of Existing Mandatory Safety Standards

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-09

    ... DEPARTMENT OF LABOR Mine Safety and Health Administration Petitions for Modification of Application of Existing Mandatory Safety Standards AGENCY: Mine Safety and Health Administration, Labor. ACTION: Notice. SUMMARY: Section 101(c) of the Federal Mine Safety and Health Act of 1977 and 30 CFR part...

  3. Planning the Unplanned Experiment: Towards Assessing the Efficacy of Standards for Safety-Critical Software

    NASA Technical Reports Server (NTRS)

    Graydon, Patrick J.; Holloway, C. M.

    2015-01-01

    Safe use of software in safety-critical applications requires well-founded means of determining whether software is fit for such use. While software in industries such as aviation has a good safety record, little is known about whether standards for software in safety-critical applications 'work' (or even what that means). It is often (implicitly) argued that software is fit for safety-critical use because it conforms to an appropriate standard. Without knowing whether a standard works, such reliance is an experiment; without carefully collecting assessment data, that experiment is unplanned. To help plan the experiment, we organized a workshop to develop practical ideas for assessing software safety standards. In this paper, we relate and elaborate on the workshop discussion, which revealed subtle but important study design considerations and practical barriers to collecting appropriate historical data and recruiting appropriate experimental subjects. We discuss assessing standards as written and as applied, several candidate definitions for what it means for a standard to 'work,' and key assessment strategies and study techniques and the pros and cons of each. Finally, we conclude with thoughts about the kinds of research that will be required and how academia, industry, and regulators might collaborate to overcome the noted barriers.

  4. 34 CFR 75.609 - Comply with safety and health standards.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 1 2010-07-01 2010-07-01 false Comply with safety and health standards. 75.609 Section 75.609 Education Office of the Secretary, Department of Education DIRECT GRANT PROGRAMS What... planning for and designing facilities, a grantee shall observe: (a) The standards under the Occupational...

  5. 48 CFR 1371.113 - Department of Labor occupational safety and health standards for ship repair.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... occupational safety and health standards for ship repair. 1371.113 Section 1371.113 Federal Acquisition... CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.113 Department of Labor occupational safety and health standards for ship repair. Insert clause 1352.271-82, Department of Labor Occupational Safety and Health...

  6. 48 CFR 1371.113 - Department of Labor occupational safety and health standards for ship repair.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... occupational safety and health standards for ship repair. 1371.113 Section 1371.113 Federal Acquisition... CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.113 Department of Labor occupational safety and health standards for ship repair. Insert clause 1352.271-82, Department of Labor Occupational Safety and Health...

  7. 48 CFR 1371.113 - Department of Labor occupational safety and health standards for ship repair.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... occupational safety and health standards for ship repair. 1371.113 Section 1371.113 Federal Acquisition... CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.113 Department of Labor occupational safety and health standards for ship repair. Insert clause 1352.271-82, Department of Labor Occupational Safety and Health...

  8. 48 CFR 1371.113 - Department of Labor occupational safety and health standards for ship repair.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... occupational safety and health standards for ship repair. 1371.113 Section 1371.113 Federal Acquisition... CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.113 Department of Labor occupational safety and health standards for ship repair. Insert clause 1352.271-82, Department of Labor Occupational Safety and Health...

  9. 48 CFR 1371.113 - Department of Labor occupational safety and health standards for ship repair.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... occupational safety and health standards for ship repair. 1371.113 Section 1371.113 Federal Acquisition... CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.113 Department of Labor occupational safety and health standards for ship repair. Insert clause 1352.271-82, Department of Labor Occupational Safety and Health...

  10. 30 CFR 7.10 - MSHA acceptance of equivalent non-MSHA product safety standards.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false MSHA acceptance of equivalent non-MSHA product... General § 7.10 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non...) [Reserved] (d) After MSHA has determined that non-MSHA product safety standards are equivalent and has...

  11. 30 CFR 7.10 - MSHA acceptance of equivalent non-MSHA product safety standards.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false MSHA acceptance of equivalent non-MSHA product... General § 7.10 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non...) [Reserved] (d) After MSHA has determined that non-MSHA product safety standards are equivalent and has...

  12. 30 CFR 7.10 - MSHA acceptance of equivalent non-MSHA product safety standards.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false MSHA acceptance of equivalent non-MSHA product... General § 7.10 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non...) [Reserved] (d) After MSHA has determined that non-MSHA product safety standards are equivalent and has...

  13. 30 CFR 7.10 - MSHA acceptance of equivalent non-MSHA product safety standards.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false MSHA acceptance of equivalent non-MSHA product... General § 7.10 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non...) [Reserved] (d) After MSHA has determined that non-MSHA product safety standards are equivalent and has...

  14. 30 CFR 7.10 - MSHA acceptance of equivalent non-MSHA product safety standards.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false MSHA acceptance of equivalent non-MSHA product... General § 7.10 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non...) [Reserved] (d) After MSHA has determined that non-MSHA product safety standards are equivalent and has...

  15. OSHA Standard Time: Worker Safety Rules for Schools.

    ERIC Educational Resources Information Center

    Smith, Sharon E.; Roy, Kenneth R.

    1994-01-01

    Briefly describes six of the Occupational Safety and Health Administration (OSHA) standards applicable to school districts. Provides a suggested approach for compliance and discusses how one district has begun to meet the challenge. The mandated OSHA programs concern the following: (1) hazard communication; (2) chemical hygiene; (3) bloodborne…

  16. Research on the management and endorsement of nuclear safety standards in the United States and its revelation for China

    NASA Astrophysics Data System (ADS)

    Liu, Ting; Tian, Yu; Yang, Lili; Gao, Siyi; Song, Dahu

    2018-01-01

    This paper introduces the American standard system, the Nuclear Regulatory Commission (NRC)’s responsibility, NRC nuclear safety regulations and standards system, studies on NRC’s standards management and endorsement mode, analyzes the characteristics of NRC standards endorsement management, and points out its disadvantages. This paper draws revelation from the standard management and endorsement model of NRC and points suggestion to China’s nuclear and radiation safety standards management.The issue of the “Nuclear Safety Law”plays an important role in China’s nuclear and radiation safety supervision. Nuclear and radiation safety regulations and standards are strong grips on the implementation of “Nuclear Safety Law”. This paper refers on the experience of international advanced countriy, will effectively promote the improvement of the endorsed management of China’s nuclear and radiation safety standards.

  17. DOE standard 3009 - a reasoned, practical approach to integrating criticality safety into SARs

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Vessard, S.G.

    1995-12-31

    In the past there have been efforts by the U.S. Department of Energy (DOE) to provide guidance on those elements that should be included in a facility`s safety analysis report (SAR). In particular, there are two DOE Orders (5480.23, {open_quotes}Nuclear Safety Analysis Reports,{close_quotes} and 5480.24, {open_quotes}Nuclear Criticality Safety{close_quotes}), an interpretive guidance document (NE-70, Interpretive Guidance for DOE Order 5480.24, {open_quotes}Nuclear Criticality Safety{close_quotes}), and DOE Standard DOE-STD-3009-94 {open_quotes}Preparation Guide for U.S. Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports.{close_quotes} Of these, the most practical and useful (pertaining to the application of criticality safety) is DOE-STD-3009-94. This paper is a reviewmore » of Chapters 3, 4, and 6 of this standard and how they provide very clear, helpful, and reasoned criticality safety guidance.« less

  18. Transportation Safety Standards for Wheelchair Users: A Review of Voluntary Standards for Improved Safety, Usability, and Independence of Wheelchair-Seated Travelers

    ERIC Educational Resources Information Center

    Schneider, Lawrence W.; Manary, Miriam A.; Hobson, Douglas A.

    2008-01-01

    Safe transportation for wheelchair users who do not transfer to the vehicle seat when traveling in motor vehicles requires after-market wheelchair tiedown and occupant restraint systems (WTORS) to secure the wheelchair and provide crashworthy restraint for the wheelchair-seated occupant. In the absence of adequate government safety standards,…

  19. 29 CFR 1960.19 - Other Federal agency standards affecting occupational safety and health.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... safety and health. 1960.19 Section 1960.19 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Standards § 1960.19 Other Federal...

  20. 29 CFR 1960.19 - Other Federal agency standards affecting occupational safety and health.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... safety and health. 1960.19 Section 1960.19 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Standards § 1960.19 Other Federal...

  1. Radiation safety of crew and passengers of air transportation in civil aviation. Provisional standards

    NASA Technical Reports Server (NTRS)

    Aksenov, A. F.; Burnazyan, A. I.

    1985-01-01

    The purpose and application of the provisional standards for radiation safety of crew and passengers in civil aviation are given. The radiation effect of cosmic radiation in flight on civil aviation air transport is described. Standard levels of radiation and conditions of radiation safety are discussed.

  2. Green lasers are beyond power limits mandated by safety standards.

    PubMed

    Lee, M H; Fox, K; Goldwasser, S; Lau, D W M; Aliahmad, B; Sarossy, M

    2016-08-01

    There has been an increasing number of reports of people losing vision from laser exposure from pocket laser pointers despite the safety limit of 1 milliwatt (1mW) imposed by the Australian government. We hypothesize that this is because commercially available red and green laser pointers are exceeding their labeled power outputs. We tested the power outputs of 4 red and 4 green lasers which were purchased for less than AUD$30 each. The average of 10 measurements was recorded for each laser. We found that 3 out of 4 red lasers conformed to the 1mW safety standard; in contrast, all of the green lasers exceeded this limit, with one of the lasers recording an output of 127.9 mW. This contrast in compliance is explained by the construction of these lasers - green lasers are typically Diode Pumped Solid State (DPSS) lasers that can emit excessive infrared (IR) radiation with poor workmanship or inconsistent adherence to practices of safe design and quality control; red lasers are diode lasers which have limited power outputs due to `Catastrophic Optical Damage' (COD). Relevant professional bodies ought to advocate more strongly for stringent testing, quality control and licensing of DPSS lasers with a view towards government intervention to banning green laser pointer use.

  3. Measurement and standardization of eye safety for optical radiation of LED products

    NASA Astrophysics Data System (ADS)

    Mou, Tongsheng; Peng, Zhenjian

    2013-06-01

    The blue light hazard (BLH) to human eye's retina is now a new issue emerging in applications of artificial light sources. Especially for solid state lighting sources based on the blue chip-LED(GaN), the photons with their energy more than 2.4 eV show photochemical effects on the retina significantly, raising damage both in photoreceptors and retinal pigment epithelium. The photobiological safety of artificial light sources emitting optical radiation has gained more and more attention worldwide and addressed by international standards IEC 62471-2006(CIE S009/E: 2002). Meanwhile, it is involved in IEC safety specifications of LED lighting products and covered by European Directive 2006/25/EC on the minimum health and safety requirements regarding the exposure of the workers to artificial optical radiation. In practical applications of the safety standards, the measuring methods of optical radiation from LED products to eyes are important in establishment of executable methods in the industry. In 2011, a new project to develop the international standard of IEC TR62471-4,that is "Measuring methods of optical radiation related to photobiological safety", was approved and are now under way. This paper presents the concerned methods for the assessment of optical radiation hazards in the standards. Furthermore, a retina radiance meter simulating eye's optical geometry is also described, which is a potential tool for blue light hazard assessment of retinal exposure to optical radiation. The spectroradiometric method integrated with charge-coupled device(CCD) imaging system is introduced to provide more reliable results.

  4. 45 CFR 2543.84 - Contract Work Hours and Safety Standards Act.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Contract Work Hours and Safety Standards Act. 2543... laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work week is... pay for all hours worked in excess of 40 hours in the work week. Section 107 of the Act is applicable...

  5. 78 FR 2662 - Proposed Extension of Approval of Information Collection; Comment Request: Safety Standard for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-14

    ... Information Collection; Comment Request: Safety Standard for Cigarette Lighters AGENCY: Consumer Product... disposable and novelty cigarette lighters. This collection of information consists of testing and recordkeeping requirements in certification regulations implementing the Safety Standard for Cigarette Lighters...

  6. Patient safety principles in family medicine residency accreditation standards and curriculum objectives

    PubMed Central

    Kassam, Aliya; Sharma, Nishan; Harvie, Margot; O’Beirne, Maeve; Topps, Maureen

    2016-01-01

    Abstract Objective To conduct a thematic analysis of the College of Family Physicians of Canada’s (CFPC’s) Red Book accreditation standards and the Triple C Competency-based Curriculum objectives with respect to patient safety principles. Design Thematic content analysis of the CFPC’s Red Book accreditation standards and the Triple C curriculum. Setting Canada. Main outcome measures Coding frequency of the patient safety principles (ie, patient engagement; respectful, transparent relationships; complex systems; a just and trusting culture; responsibility and accountability for actions; and continuous learning and improvement) found in the analyzed CFPC documents. Results Within the analyzed CFPC documents, the most commonly found patient safety principle was patient engagement (n = 51 coding references); the least commonly found patient safety principles were a just and trusting culture (n = 5 coding references) and complex systems (n = 5 coding references). Other patient safety principles that were uncommon included responsibility and accountability for actions (n = 7 coding references) and continuous learning and improvement (n = 12 coding references). Conclusion Explicit inclusion of patient safety content such as the use of patient safety principles is needed for residency training programs across Canada to ensure the full spectrum of care is addressed, from community-based care to acute hospital-based care. This will ensure a patient safety culture can be cultivated from residency and sustained into primary care practice. PMID:27965349

  7. 24 CFR 3280.6 - Serial number.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 5 2013-04-01 2013-04-01 false Serial number. 3280.6 Section 3280... DEVELOPMENT MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS General § 3280.6 Serial number. (a) A manufactured home serial number which will identify the manufacturer and the state in which the manufactured...

  8. 24 CFR 3280.6 - Serial number.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 5 2012-04-01 2012-04-01 false Serial number. 3280.6 Section 3280... DEVELOPMENT MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS General § 3280.6 Serial number. (a) A manufactured home serial number which will identify the manufacturer and the state in which the manufactured...

  9. 24 CFR 3280.6 - Serial number.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 5 2011-04-01 2011-04-01 false Serial number. 3280.6 Section 3280... DEVELOPMENT MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS General § 3280.6 Serial number. (a) A manufactured home serial number which will identify the manufacturer and the state in which the manufactured...

  10. 24 CFR 3280.6 - Serial number.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Serial number. 3280.6 Section 3280... DEVELOPMENT MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS General § 3280.6 Serial number. (a) A manufactured home serial number which will identify the manufacturer and the state in which the manufactured...

  11. 24 CFR 3280.6 - Serial number.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 24 Housing and Urban Development 5 2014-04-01 2014-04-01 false Serial number. 3280.6 Section 3280... DEVELOPMENT MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS General § 3280.6 Serial number. (a) A manufactured home serial number which will identify the manufacturer and the state in which the manufactured...

  12. Prevalence and determinants of non-standard motorcycle safety helmets amongst food delivery workers in Selangor and Kuala Lumpur.

    PubMed

    Kulanthayan, S; See, Lai Git; Kaviyarasu, Y; Nor Afiah, M Z

    2012-05-01

    Almost half of the global traffic crashes involve vulnerable groups such as pedestrian, cyclists and two-wheeler users. The main objective of this study was to determine the factors that influence standard of the safety helmets used amongst food delivery workers by presence of Standard and Industrial Research Institute of Malaysia (SIRIM) certification label. A cross sectional study was conducted amongst 150 food delivery workers from fast food outlets in the vicinity of Selangor and Kuala Lumpur. During observation, safety helmets were classified as standard safety helmet in the presence of SIRIM label and non-standard in the absence of the label. They were approached for questionnaire participation once consent was obtained and were requested to exchange their safety helmet voluntarily with a new one after the interview. Data analysis was carried out using SPSS. Chi square and logistic regression analysis was applied to determine the significance and odds ratio of the variables studied, respectively (penetration test, age, education level, knowledge, crash history, types of safety helmet, marital status and years of riding experience) against the presence of SIRIM label. The response rate for this study was 85.2%. The prevalence of non-standard helmets use amongst fast food delivery workers was 55.3%. Safety helmets that failed the penetration test had higher odds of being non-standard helmets compared with safety helmets passing the test. Types of safety helmet indicated half-shell safety helmets had higher odds to be non-standard safety helmets compared to full-shell safety helmets. Riders with more years of riding experience were in high odds of wearing non-standard safety helmets compared to riders with less riding experience. Non-standard (non-SIRIM approved) helmets were more likely to be half-shell helmets, were more likely to fail the standards penetration test, and were more likely to be worn by older, more experienced riders. The implications of these

  13. Transportation of natural and other gases and liquids by pipeline occupational safety and health standards

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1979-05-17

    The U.S. Materials Transportation Bureau (MTB) withdraws an advanced notice of proposed rulemaking (ANPR) which requested advice, recommendations, and information relating to the issuance of additional occupational safety and health standards for the protection of employees engaged in the construction, operation, and maintenance of pipeline systems and facilities used in the transportation of hazardous materials. Comments submitted in response to the ANPR indicated that the issuance of additional occupational safety and health standards by the MTB would be a duplication of the U.S. Occupational Safety and Health Administration's efforts and would increase the possibility of jurisdictional disputes. Since the MTB'smore » present standards development efforts are primarily directed at public safety (as opposed to occupational safety) by regulating pipeline design, construction, operation, and maintenance activities, the MTB withdraws the ANPR.« less

  14. Exploring the safety in numbers effect for vulnerable road users on a macroscopic scale.

    PubMed

    Tasic, Ivana; Elvik, Rune; Brewer, Simon

    2017-12-01

    A "Safety in Numbers" effect for a certain group of road users is present if the number of crashes increases at a lower rate than the number of road users. The existence of this effect has been invoked to justify investments in multimodal transportation improvements in order to create more sustainable urban transportation systems by encouraging walking, biking, and transit ridership. The goal of this paper is to explore safety in numbers effect for cyclists and pedestrians in areas with different levels of access to multimodal infrastructure. Data from Chicago served to estimate the expected number of crashes on the census tract level by applying Generalized Additive Models (GAM) to capture spatial dependence in crash data. Measures of trip generation, multimodal infrastructure, network connectivity and completeness, and accessibility were used to model travel exposure in terms of activity, number of trips, trip length, travel opportunities, and conflicts. The results show that a safety in numbers effect exists on a macroscopic level for motor vehicles, pedestrians, and bicyclists. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. 29 CFR 500.133 - Substantive Federal and State safety and health standards defined.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 3 2014-07-01 2014-07-01 false Substantive Federal and State safety and health standards defined. 500.133 Section 500.133 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION... Migrant Workers Housing Safety and Health § 500.133 Substantive Federal and State safety and health...

  16. 78 FR 73692 - Revisions to Safety Standards for Infant Bath Seats, Toddler Beds, and Full-Size Baby Cribs

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-09

    ... standard issued under the Danny Keysar Child Product Safety Notification Act was based, the revision... standard. Section 26(c) of the CPSA also provides that states or political subdivisions of states may apply... CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Parts 1215, 1217 and 1219 Revisions to Safety Standards...

  17. 78 FR 63019 - Safety Standard for Bassinets and Cradles

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-23

    ... directly attributable to product stability, the instability of the product, in many incidents, was to blame... stability test procedure, and (2) the addition of new provisions for a segmented mattress flatness test and a removable bed stability requirement. In this document, the Commission is issuing a safety standard...

  18. 42 CFR 486.108 - Condition for coverage: Safety standards.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 5 2011-10-01 2011-10-01 false Condition for coverage: Safety standards. 486.108 Section 486.108 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN... BY SUPPLIERS Conditions for Coverage: Portable X-Ray Services § 486.108 Condition for coverage...

  19. 78 FR 40443 - Submission for OMB Review; Comment Request-Recordkeeping Requirements Under the Safety Standard...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-05

    ... Request--Recordkeeping Requirements Under the Safety Standard for Infant Walkers AGENCY: Consumer Product... for infant walkers, 16 CFR part 1216. No comments were received in response to that notice. Therefore... has been incorporated by reference in the safety standard for infant walkers, 16 CFR part 1216...

  20. 77 FR 63800 - Proposed Extension of Approval of Information Collection; Comment Request-Safety Standard for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-17

    ... CONSUMER PRODUCT SAFETY COMMISSION Proposed Extension of Approval of Information Collection; Comment Request--Safety Standard for Walk-Behind Power Lawn Mowers AGENCY: Consumer Product Safety.... Chapter 35), the Consumer Product Safety Commission (CPSC) requested comments on a proposed extension of...

  1. Edible safety requirements and assessment standards for agricultural genetically modified organisms.

    PubMed

    Deng, Pingjian; Zhou, Xiangyang; Zhou, Peng; Du, Zhong; Hou, Hongli; Yang, Dongyan; Tan, Jianjun; Wu, Xiaojin; Zhang, Jinzhou; Yang, Yongcun; Liu, Jin; Liu, Guihua; Li, Yonghong; Liu, Jianjun; Yu, Lei; Fang, Shisong; Yang, Xiaoke

    2008-05-01

    This paper describes the background, principles, concepts and methods of framing the technical regulation for edible safety requirement and assessment of agricultural genetically modified organisms (agri-GMOs) for Shenzhen Special Economic Zone in the People's Republic of China. It provides a set of systematic criteria for edible safety requirements and the assessment process for agri-GMOs. First, focusing on the degree of risk and impact of different agri-GMOs, we developed hazard grades for toxicity, allergenicity, anti-nutrition effects, and unintended effects and standards for the impact type of genetic manipulation. Second, for assessing edible safety, we developed indexes and standards for different hazard grades of recipient organisms, for the influence of types of genetic manipulation and hazard grades of agri-GMOs. To evaluate the applicability of these criteria and their congruency with other safety assessment systems for GMOs applied by related organizations all over the world, we selected some agri-GMOs (soybean, maize, potato, capsicum and yeast) as cases to put through our new assessment system, and compared our results with the previous assessments. It turned out that the result of each of the cases was congruent with the original assessment.

  2. Assuring Rural Hospital Patient Safety: What Should Be the Priorities?

    ERIC Educational Resources Information Center

    Coburn, Andrew F.; Wakefield, Mary; Casey, Michelle; Moscovice, Ira; Payne, Susan; Loux, Stephenie

    2004-01-01

    Context: Since reports on patient safety were issued by the Institute of Medicine, a number of interventions have been recommended and standards designed to improve hospital patient safety, including the Leapfrog, evidence-based safety standards. These standards are based on research conducted largely in urban hospitals, and it may not be possible…

  3. Health and safety management systems: liability or asset?

    PubMed

    Bennett, David

    2002-01-01

    Health and safety management systems have a background in theory and in various interests among employers and workplace health and safety professionals. These have resulted in a number of national systems emanating from national standard-writing centres and from employers' organizations. In some cases these systems have been recognized as national standards. The contenders for an international standard have been the International Organization of Standardization (ISO) and the International Labour Organization (ILO). The quality and environmental management systems of ISO indicate what an ISO health and safety management standard would look like. The ILO Guidelines on Safety and Health Management Systems, by contrast, are stringent, specific and potentially effective in improving health and safety performance in the workplace.

  4. Safety in numbers? Tackling domestic abuse in couples and network therapies.

    PubMed

    Galvani, Sarah A

    2007-03-01

    Family, network or couples-based therapies have been helping to support people with substance problems for decades. Their value in supporting a person to change their alcohol or drug use is clear. However, as links between substance use and domestic abuse are increasingly recognised, these approaches need to reflect on the potential safety risks they present to people taking part. The prevalence of domestic abuse among people receiving drug and alcohol services is considerably higher than general population estimates, yet this does not appear to have been adequately addressed in network therapies. This article suggests that this needs to change and that safety of service users needs to be at least as important as the intervention itself. It offers for debate a number of potential safety issues raised by network therapies where there is evidence of domestic abuse; it provides examples of three approaches used to marshal social and network support in substance interventions; and offers a number of suggestions for how network therapies can ensure their use remains safe and supportive where there is domestic abuse.

  5. Forest management practices and the occupational safety and health administration logging standard

    Treesearch

    John R. Myers; David Elton Fosbroke

    1995-01-01

    The Occupational Safety and Health Administration (OSHA) has established safety and health regulations for the logging industry. These new regulations move beyond the prior OSHA pulpwood harvesting standard by including sawtimber harvesting operations. Because logging is a major tool used by forest managers to meet silvicultural goals, managers must be aware of what...

  6. A study of Michigan safety belt use prior to implementation of standard enforcement

    DOT National Transportation Integrated Search

    2000-02-01

    Reported here are the results of a direct observation survey of safety belt use conducted in January 2000 to provide a baseline rate from which to measure safety belt use trends following the implementation of standard enforcement in Michigan. In thi...

  7. 75 FR 27734 - Agency Information Collection Activities; Proposed Collection; Comment Request; Safety Standard...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-18

    ... Glatz, Division of Policy and Planning, Office of Information Technology, Consumer Product Safety... appropriate, and other forms of information technology. Title: Safety Standard for Bicycle Helmets--16 CFR... and process for Commission acceptance of accreditation of third party conformity assessment bodies for...

  8. Safety in Numbers

    ERIC Educational Resources Information Center

    Pierce, Dennis

    2017-01-01

    Many people are not aware of how significant a role two-year institutions play in training emergency first responders. Community colleges play a key role in training the nation's police officers and other public safety employees, such as firefighters and emergency medical technicians (EMTs). The demand for these programs is high. There is a…

  9. The Road to Psychological Safety: Legal, Scientific, and Social Foundations for a Canadian National Standard on Psychological Safety in the Workplace

    ERIC Educational Resources Information Center

    Shain, Martin; Arnold, Ian; GermAnn, Kathy

    2012-01-01

    In Part 1 of this article, the legal and scientific origins of the concept of psychological safety are examined as background to, and support for, the new Canadian National Standard on Psychological Health and Safety in the Workplace (CSA Z1003/BNQ 9700). It is shown that five factors influencing psychological safety can be identified as being…

  10. 75 FR 4703 - Track Safety Standards; Continuous Welded Rail (CWR)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-29

    ... DEPARTMENT OF TRANSPORTATION Federal Railroad Administration 49 CFR Part 213 [Docket No. FRA-2008-0036] RIN 2130-AB90 Track Safety Standards; Continuous Welded Rail (CWR) AGENCY: Federal Railroad Administration (FRA), Department of Transportation (DOT). ACTION: Final rule; response to petition for...

  11. Public Safety Standards for the Launch and Entry of Spacecraft

    NASA Astrophysics Data System (ADS)

    Wilde, Paul; Van Suetendael, Richard; Hallock, James; Larson, Erik

    2005-12-01

    This paper describes elements of the US government's response to the Space Shuttle Columbia accident and other actions recently taken, relevant to public safety during launch and entry of spacecraft. The Columbia accident generated numerous debris impacts capable of causing public harm, including major property damage as well as serious injury to members of the public on the ground, in aircraft, and on waterborne vessels. The Columbia Accident Investigation Board (CAIB) commissioned an analysis by ACTA Inc. that found the lack of reported casualties on the ground was a reasonably expected result based on the recovered debris data, census data, and mathematical methods consistent with current standards for launch debris risk analyses. [1, 2] A more detailed aircraft risk analysis, funded by the Federal Aviation Administration (FAA), used the actual records of aircraft activity at the time of the accident, and found that the probability of an impact by Columbia debris to commercial aircraft in the vicinity was at least one in a thousand, and the chance of an impact to general aviation was at least one in a hundred. [3] After FAA executives were briefed about the potential for aircraft impacts during the Columbia accident, and the challenges presented by integration of innovative vehicles such as SpaceShipOne into the National Airspace System (NAS), the FAA began to investigate a decision support tool to better manage the interface of space and air traffic in the future. In addition, the FAA asked the Common Standards Working Group (CSWG) to investigate risk and air traffic management issues that arise in the event of space vehicle accidents and to develop safety standards to govern the interface between space and air traffic. Most recently, the FAA funded a study of aircraft risk around operating areas for future flights of suborbital rockets that may be authorized by an Experimental Permit (EP). Congress mandated that the FAA develop the EP regime as a streamlined

  12. 77 FR 73354 - Safety Standard for Hand-Held Infant Carriers

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-10

    .... Edwards, Project Manager, Directorate for Engineering Sciences, U.S. Consumer Product Safety Commission, 5..., allergic reactions and near- choking episodes are the most common injuries reported in the remaining 58... modification of the ASTM standard to address the requirements for flammability, surface chemicals, cords...

  13. 77 FR 63800 - Proposed Extension of Approval of Information Collection; Comment Request-Safety Standard for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-17

    ... CONSUMER PRODUCT SAFETY COMMISSION Proposed Extension of Approval of Information Collection; Comment Request--Safety Standard for Automatic Residential Garage Door Operators AGENCY: Consumer Product... 1995 (44 U.S.C. Chapter 35), the Consumer Product Safety Commission (CPSC) requested comments on a...

  14. 75 FR 21567 - Federal Motor Vehicle Safety Standard No. 108; Lamp, Reflective Devices and Associated Equipment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-26

    ... Federal Motor Vehicle Safety Standard No. 108; Lamp, Reflective Devices and Associated Equipment; Denial... Motor Vehicle Safety Standard (FMVSS) No. 108; Lamps, reflective devices, and associated equipment... physical filaments in the lamp. Specifically, BMW requested that paragraph S10.17.1.1.2 \\4\\ of the...

  15. Research and development of a safety standard for workstation tables in the United States

    DOT National Transportation Integrated Search

    2013-02-21

    The US safety standard for workstation tables is presented to an international audience, : such that rail operators and equipment manufacturers may better understand the research : behind the requirements, the process through which the safety standar...

  16. Safety in construction--a comprehensive description of the characteristics of high safety standards in construction work, from the combined perspective of supervisors and experienced workers.

    PubMed

    Törner, Marianne; Pousette, Anders

    2009-01-01

    The often applied engineering approach to safety management in the construction industry needs to be supplemented by organizational measures and measures based on how people conceive and react to their social environment. This requires in-depth knowledge of the broad preconditions for high safety standards in construction. The aim of the study was to comprehensively describe the preconditions and components of high safety standards in the construction industry from the perspective of both experienced construction workers and first-line managers. Five worker safety representatives and 19 first-line managers were interviewed, all strategically selected from within a large Swedish construction project. Phenomenographic methodology was used for data acquisition and analysis and to categorize the information. Nine informants verified the results. The study identified four main categories of work safety preconditions and components: (1) Project characteristics and nature of the work, which set the limits of safety management; (2) Organization and structures, with the subcategories planning, work roles, procedures, and resources; (3) Collective values, norms, and behaviors, with the subcategories climate and culture, and interaction and cooperation; and (4) Individual competence and attitudes, with the subcategories knowledge, ability and experience, and individual attitudes. The results comprehensively describe high safety standards in construction, incorporating organizational, group, individual, and technical aspects. High-quality interaction between different organizational functions and hierarchical levels stood out as important aspects of safety. The results are discussed in relation to previous research into safety and into the social-psychological preconditions for other desired outcomes in occupational settings. The results can guide construction companies in planning and executing construction projects to a high safety standard.

  17. 76 FR 55056 - Toy Safety Standard: Strategic Outreach and Education Plan

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-06

    ... to test and certify to the toy safety standard. We plan to use traditional and social media to... particularly in medium- and small-size publications that target individual toy makers and crafters, such as...

  18. 77 FR 22564 - Proposed Collection; Comment Request; Safety Standards for Full-Size Baby Cribs and Non-Full-Size...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-16

    ... child care centers' compliance with the recent CPSC safety standards for full-size and non-full-size... CONSUMER PRODUCT SAFETY COMMISSION [Docket No. CPSC-2012-0019] Proposed Collection; Comment Request; Safety Standards for Full- Size Baby Cribs and Non-Full-Size Baby Cribs; Compliance Form AGENCY...

  19. 77 FR 75600 - Policy Statement on Occupational Safety and Health Standards for Aircraft Cabin Crewmembers...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-21

    ... [Docket No. FAA-2012-0953] Policy Statement on Occupational Safety and Health Standards for Aircraft Cabin... announced a proposed policy statement regarding the regulation of some occupational safety and health conditions affecting cabin crewmembers on aircraft by the Occupational Safety and Health Administration. The...

  20. National Highway Traffic Safety Administration Corporate Average Fuel Economy (CAFE) Standards

    DOT National Transportation Integrated Search

    2003-01-01

    The National Highway Traffic Safety Administration (NHTSA) must set Corporate Average Fuel Economy (CAFE) standards for light trucks. This was authorized by the Energy Policy and Conservation Act, which added Title V: Imporving Automotive Fuel Effici...

  1. Electrical safety of conducted electrical weapons relative to requirements of relevant electrical standards.

    PubMed

    Panescu, Dorin; Nerheim, Max; Kroll, Mark

    2013-01-01

    TASER(®) conducted electrical weapons (CEW) deliver electrical pulses that can inhibit a person's neuromuscular control or temporarily incapacitate. TASER X26, X26P, and X2 are among CEW models most frequently deployed by law enforcement agencies. The X2 CEW uses two cartridge bays while the X26 and X26P CEWs have only one. The TASER X26P CEW electronic output circuit design is equivalent to that of any one of the two TASER X2 outputs. The goal of this paper was to analyze the nominal electrical outputs of TASER X26, X26P, and X2 CEWs in reference to provisions of several international standards that specify safety requirements for electrical medical devices and electrical fences. Although these standards do not specifically mention CEWs, they are the closest electrical safety standards and hence give very relevant guidance. The outputs of two TASER X26 and two TASER X2 CEWs were measured and confirmed against manufacturer and other published specifications. The TASER X26, X26P, and X2 CEWs electrical output parameters were reviewed against relevant safety requirements of UL 69, IEC 60335-2-76 Ed 2.1, IEC 60479-1, IEC 60479-2, AS/NZS 60479.1, AS/NZS 60479.2 and IEC 60601-1. Prior reports on similar topics were reviewed as well. Our measurements and analyses confirmed that the nominal electrical outputs of TASER X26, X26P and X2 CEWs lie within safety bounds specified by relevant requirements of the above standards.

  2. 78 FR 70415 - Federal Motor Vehicle Safety Standards; Occupant Crash Protection

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-25

    ...Completing the first initiative of NHTSA's 2007 ``NHTSA's Approach to Motorcoach Safety'' plan and one of the principal undertakings of DOT's 2009 Motorcoach Safety Action Plan, and fulfilling a statutory mandate of the Motorcoach Enhanced Safety Act of 2012, incorporated into the Moving Ahead for Progress in the 21st Century Act, this final rule amends the Federal motor vehicle safety standard (FMVSS) on occupant crash protection to require lap/shoulder seat belts for each passenger seating position in all new over-the-road buses, and in new buses other than over-the-road buses with a gross vehicle weight rating (GVWR) greater than 11,793 kilograms (kg) (26,000 pounds (lb), with certain exclusions. By requiring the passenger lap/ shoulder seat belts, this final rule significantly reduces the risk of fatality and serious injury in frontal crashes and the risk of occupant ejection in rollovers, thus considerably enhancing the safety of these vehicles.

  3. 77 FR 72998 - Policy Statement on Occupational Safety and Health Standards for Aircraft Cabin Crewmembers

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-07

    ... aircraft by the Occupational Safety and Health Administration (OSHA). This policy statement will enhance occupational safety and health in the aircraft cabin by establishing the extent to which OSHA requirements may... [Docket No.: FAA-2012-0953] Policy Statement on Occupational Safety and Health Standards for Aircraft...

  4. 29 CFR 1910.8 - OMB control numbers under the Paperwork Reduction Act.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 5 2012-07-01 2012-07-01 false OMB control numbers under the Paperwork Reduction Act. 1910.8 Section 1910.8 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS General § 1910.8 OMB control numbers...

  5. 29 CFR 1910.8 - OMB control numbers under the Paperwork Reduction Act.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 5 2011-07-01 2011-07-01 false OMB control numbers under the Paperwork Reduction Act. 1910.8 Section 1910.8 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS General § 1910.8 OMB control numbers...

  6. 48 CFR 22.403-3 - Contract Work Hours and Safety Standards Act.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... workweek unless paid for all additional hours at not less than 11/2 times the basic rate of pay (see 22.301... Standards for Contracts Involving Construction 22.403-3 Contract Work Hours and Safety Standards Act. The... 22.305) contain a clause (see 52.222-4) specifying that no laborer or mechanic doing any part of the...

  7. 49 CFR Appendix C to Part 238 - Suspension System Safety Performance Standards

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Suspension System Safety Performance Standards C... industry standard acceptable to FRA is developed and approved under the procedures provided in § 238.21. (a... as follows: ER12MY99.005 where: δ=flange angle (deg). μ=coefficient of friction of 0.5. (2) The net...

  8. 49 CFR Appendix C to Part 238 - Suspension System Safety Performance Standards

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Suspension System Safety Performance Standards C... industry standard acceptable to FRA is developed and approved under the procedures provided in § 238.21. (a... as follows: ER12MY99.005 where: δ=flange angle (deg). μ=coefficient of friction of 0.5. (2) The net...

  9. 78 FR 55137 - Federal Motor Vehicle Safety Standards; Ejection Mitigation

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-09

    ...This document responds to petitions for reconsideration of a 2011 final rule that established Federal Motor Vehicle Safety Standard (FMVSS) No. 226, ``Ejection mitigation.'' The standard is intended to reduce complete and partial ejections of vehicle occupants through side windows in crashes, particularly rollover crashes. Generally, the issues raised by the petitioners are of two types. The petitioners ask for reconsideration of policy issues relating to the agency's implementation of the standard, and of technical issues concerning engineering aspects of the rule, particularly as to how the compliance test procedure should be conducted or improved. Most of the requested changes were of the latter type. In general, NHTSA is denying the petitions for reconsideration. The few changes we have made in response to the petitions are minor, mostly to clarify the requirements of the standard.

  10. 77 FR 45242 - Revisions to Safety Standards for Durable Infant or Toddler Products: Infant Bath Seats and Full...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-31

    ... direction in the Danny Keysar Child Product Safety Notification Act to issue standards for durable infant or... not usually subject to CPSC's standards, such as child care facilities, family child care homes, and... standard issued under the Danny Keysar Child Product Safety Notification Act was based, the revision...

  11. 75 FR 81765 - Safety Standards for Full-Size Baby Cribs and Non-Full-Size Baby Cribs; Final Rule

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-28

    ...Section 104(b) of the Consumer Product Safety Improvement Act of 2008 (``CPSIA'') requires the United States Consumer Product Safety Commission (``CPSC,'' ``Commission,'' or ``we'') to promulgate consumer product safety standards for durable infant or toddler products. These standards are to be ``substantially the same as'' applicable voluntary standards or more stringent than the voluntary standard if the Commission concludes that more stringent requirements would further reduce the risk of injury associated with the product. The Commission is issuing safety standards for full-size and non-full-size baby cribs in response to the direction under section 104(b) of the CPSIA.\\1\\ Section 104(c) of the CPSIA specifies that the crib standards will cover used as well as new cribs. The crib standards will apply to anyone who manufactures, distributes, or contracts to sell a crib; to child care facilities, family child care homes, and others holding themselves out to be knowledgeable about cribs; to anyone who leases, sublets, or otherwise places a crib in the stream of commerce; and to owners and operators of places of public accommodation affecting commerce. ---------------------------------------------------------------------------

  12. A Comprehensive Review of Spirit Drink Safety Standards and Regulations from an International Perspective.

    PubMed

    Pang, Xiao-Na; Li, Zhao-Jie; Chen, Jing-Yu; Gao, Li-Juan; Han, Bei-Zhong

    2017-03-01

    Standards and regulations related to spirit drinks have been established by different countries and international organizations to ensure the safety and quality of spirits. Here, we introduce the principles of food safety and quality standards for alcoholic beverages and then compare the key indicators used in the distinct standards of the Codex Alimentarius Commission, the European Union, the People's Republic of China, the United States, Canada, and Australia. We also discuss in detail the "maximum level" of the following main contaminants of spirit drinks: methanol, higher alcohols, ethyl carbamate, hydrocyanic acid, heavy metals, mycotoxins, phthalates, and aldehydes. Furthermore, the control measures used for potential hazards are introduced. Harmonization of the current requirements based on comprehensive scope analysis and the risk assessment approach will enhance both the trade and quality of distilled spirits. This review article provides valuable information that will enable producers, traders, governments, and researchers to increase their knowledge of spirit drink safety requirements, control measures, and research trends.

  13. 76 FR 10524 - Federal Motor Vehicle Safety Standards, Ejection Mitigation; Phase-In Reporting Requirements...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-25

    ... DEPARTMENT OF TRANSPORTATION National Highway Traffic Safety Administration 49 CFR Parts 571 and 585 [Docket No. NHTSA-2011-0004] RIN 2127-AK23 Federal Motor Vehicle Safety Standards, Ejection Mitigation; Phase-In Reporting Requirements; Incorporation by Reference Correction In rule document 2011-547...

  14. 49 CFR 383.21 - Number of drivers' licenses.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 5 2011-10-01 2011-10-01 false Number of drivers' licenses. 383.21 Section 383.21 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL MOTOR CARRIER SAFETY... STANDARDS; REQUIREMENTS AND PENALTIES Single License Requirement § 383.21 Number of drivers' licenses. No...

  15. 49 CFR 383.21 - Number of drivers' licenses.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 5 2010-10-01 2010-10-01 false Number of drivers' licenses. 383.21 Section 383.21 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL MOTOR CARRIER SAFETY... STANDARDS; REQUIREMENTS AND PENALTIES Single License Requirement § 383.21 Number of drivers' licenses. No...

  16. 49 CFR 383.21 - Number of drivers' licenses.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 5 2014-10-01 2014-10-01 false Number of drivers' licenses. 383.21 Section 383.21 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL MOTOR CARRIER SAFETY... STANDARDS; REQUIREMENTS AND PENALTIES Single License Requirement § 383.21 Number of drivers' licenses. No...

  17. 49 CFR 383.21 - Number of drivers' licenses.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 5 2013-10-01 2013-10-01 false Number of drivers' licenses. 383.21 Section 383.21 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL MOTOR CARRIER SAFETY... STANDARDS; REQUIREMENTS AND PENALTIES Single License Requirement § 383.21 Number of drivers' licenses. No...

  18. 38 CFR 17.155 - Minimum standards of safety and quality for automotive adaptive equipment.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... safety and quality for automotive adaptive equipment. 17.155 Section 17.155 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS MEDICAL Automotive Equipment and Driver Training § 17.155 Minimum standards of safety and quality for automotive adaptive equipment. (a) The Under Secretary for...

  19. 38 CFR 17.155 - Minimum standards of safety and quality for automotive adaptive equipment.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... safety and quality for automotive adaptive equipment. 17.155 Section 17.155 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS MEDICAL Automotive Equipment and Driver Training § 17.155 Minimum standards of safety and quality for automotive adaptive equipment. (a) The Under Secretary for...

  20. 38 CFR 17.155 - Minimum standards of safety and quality for automotive adaptive equipment.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... safety and quality for automotive adaptive equipment. 17.155 Section 17.155 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS MEDICAL Automotive Equipment and Driver Training § 17.155 Minimum standards of safety and quality for automotive adaptive equipment. (a) The Under Secretary for...

  1. 38 CFR 17.155 - Minimum standards of safety and quality for automotive adaptive equipment.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... safety and quality for automotive adaptive equipment. 17.155 Section 17.155 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS MEDICAL Automotive Equipment and Driver Training § 17.155 Minimum standards of safety and quality for automotive adaptive equipment. (a) The Under Secretary for...

  2. 78 FR 49996 - Pipeline Safety: Periodic Updates of Regulatory References to Technical Standards and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-16

    ..., natural gas and other types of materials transported by pipeline, it is not possible to establish... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Parts..., Transportation of Natural and Other Gas by Pipeline: Minimum Federal Safety Standards; 49 CFR part 193, Liquefied...

  3. 48 CFR 852.222-70 - Contract Work Hours and Safety Standards Act-nursing home care contract supplement.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Safety Standards Act-nursing home care contract supplement. 852.222-70 Section 852.222-70 Federal...—nursing home care contract supplement. As prescribed in 822.305, for nursing home care requirements, insert the following clause: Contract Work Hours and Safety Standards Act—Nursing Home Care Contract...

  4. 48 CFR 852.222-70 - Contract Work Hours and Safety Standards Act-nursing home care contract supplement.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Safety Standards Act-nursing home care contract supplement. 852.222-70 Section 852.222-70 Federal...—nursing home care contract supplement. As prescribed in 822.305, for nursing home care requirements, insert the following clause: Contract Work Hours and Safety Standards Act—Nursing Home Care Contract...

  5. 48 CFR 852.222-70 - Contract Work Hours and Safety Standards Act-nursing home care contract supplement.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Safety Standards Act-nursing home care contract supplement. 852.222-70 Section 852.222-70 Federal...—nursing home care contract supplement. As prescribed in 822.305, for nursing home care requirements, insert the following clause: Contract Work Hours and Safety Standards Act—Nursing Home Care Contract...

  6. 48 CFR 852.222-70 - Contract Work Hours and Safety Standards Act-nursing home care contract supplement.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Safety Standards Act-nursing home care contract supplement. 852.222-70 Section 852.222-70 Federal...—nursing home care contract supplement. As prescribed in 822.305, for nursing home care requirements, insert the following clause: Contract Work Hours and Safety Standards Act—Nursing Home Care Contract...

  7. 48 CFR 852.222-70 - Contract Work Hours and Safety Standards Act-nursing home care contract supplement.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Safety Standards Act-nursing home care contract supplement. 852.222-70 Section 852.222-70 Federal...—nursing home care contract supplement. As prescribed in 822.305, for nursing home care requirements, insert the following clause: Contract Work Hours and Safety Standards Act—Nursing Home Care Contract...

  8. 49 CFR 231.35 - Procedure for modification of an approved industry safety appliance standard for new railcar...

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... industry safety appliance standard for new construction of railroad cars, locomotives, tenders, or other... 49 Transportation 4 2013-10-01 2013-10-01 false Procedure for modification of an approved industry... TRANSPORTATION RAILROAD SAFETY APPLIANCE STANDARDS § 231.35 Procedure for modification of an approved industry...

  9. 49 CFR 231.35 - Procedure for modification of an approved industry safety appliance standard for new railcar...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... industry safety appliance standard for new construction of railroad cars, locomotives, tenders, or other... 49 Transportation 4 2014-10-01 2014-10-01 false Procedure for modification of an approved industry... TRANSPORTATION RAILROAD SAFETY APPLIANCE STANDARDS § 231.35 Procedure for modification of an approved industry...

  10. 49 CFR 231.35 - Procedure for modification of an approved industry safety appliance standard for new railcar...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... industry safety appliance standard for new construction of railroad cars, locomotives, tenders, or other... 49 Transportation 4 2012-10-01 2012-10-01 false Procedure for modification of an approved industry... TRANSPORTATION RAILROAD SAFETY APPLIANCE STANDARDS § 231.35 Procedure for modification of an approved industry...

  11. 49 CFR 231.35 - Procedure for modification of an approved industry safety appliance standard for new railcar...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... industry safety appliance standard for new construction of railroad cars, locomotives, tenders, or other... 49 Transportation 4 2011-10-01 2011-10-01 false Procedure for modification of an approved industry... TRANSPORTATION RAILROAD SAFETY APPLIANCE STANDARDS § 231.35 Procedure for modification of an approved industry...

  12. 77 FR 19132 - Federal Motor Vehicle Safety Standards; Bus Emergency Exits and Window Retention and Release

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-30

    ... DEPARTMENT OF TRANSPORTATION National Highway Traffic Safety Administration 49 CFR Part 571 [Docket No. NHTSA-2012-0037] RIN 2127-AK20 Federal Motor Vehicle Safety Standards; Bus Emergency Exits and Window Retention and Release AGENCY: National Highway Traffic Safety Administration (NHTSA), Department...

  13. Improving Patient Safety in Public Hospitals: Developing Standard Measures to Track Medical Errors and Process Breakdowns.

    PubMed

    Ackerman, Sara L; Gourley, Gato; Le, Gem; Williams, Pamela; Yazdany, Jinoos; Sarkar, Urmimala

    2018-03-14

    The aim of the study was to develop standards for tracking patient safety gaps in ambulatory care in safety net health systems. Leaders from five California safety net health systems were invited to participate in a modified Delphi process sponsored by the Safety Promotion Action Research and Knowledge Network (SPARKNet) and the California Safety Net Institute in 2016. During each of the three Delphi rounds, the feasibility and validity of 13 proposed patient safety measures were discussed and prioritized. Surveys and transcripts from the meetings were analyzed to understand the decision-making process. The Delphi process included eight panelists. Consensus was reached to adopt 9 of 13 proposed measures. All 9 measures were unanimously considered valid, but concern was expressed about the feasibility of implementing several of the measures. Although safety net health systems face high barriers to standardized measurement, our study demonstrates that consensus can be reached on acceptable and feasible methods for tracking patient safety gaps in safety net health systems. If accompanied by the active participation key stakeholder groups, including patients, clinicians, staff, data system professionals, and health system leaders, the consensus measures reported here represent one step toward improving ambulatory patient safety in safety net health systems.

  14. Radon in the Workplace: the Occupational Safety and Health Administration (OSHA) Ionizing Radiation Standard.

    PubMed

    Lewis, Robert K

    2016-10-01

    On 29 December 1970, the Occupational Safety and Health Act of 1970 established the Occupational Safety and Health Administration (OSHA). This article on OSHA, Title 29, Part 1910.1096 Ionizing Radiation standard was written to increase awareness of the employer, the workforce, state and federal governments, and those in the radon industry who perform radon testing and radon mitigation of the existence of these regulations, particularly the radon relevant aspect of the regulations. This review paper was also written to try to explain what can sometimes be complicated regulations. As the author works within the Radon Division of the Pennsylvania Department of Environmental Protection, Bureau of Radiation Protection, the exclusive focus of the article is on radon. The 1910.1096 standard obviously covers many other aspects of radiation and radiation safety in the work place.

  15. 76 FR 15903 - Federal Motor Vehicle Safety Standards; Roof Crush Resistance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-22

    ... documents in that rulemaking, NHTSA discussed the history of issues related to the certification of vehicles... thought a proposed option for certain multi-stage vehicles to meet the requirements of FMVSS No. 220... rule that upgraded the agency's safety standard on roof crush resistance. The petition was submitted by...

  16. 78 FR 16051 - Vehicle/Track Interaction Safety Standards; High-Speed and High Cant Deficiency Operations

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-13

    ...FRA is amending the Track Safety Standards and Passenger Equipment Safety Standards to promote the safe interaction of rail vehicles with the track over which they operate under a variety of conditions at speeds up to 220 m.p.h. The final rule revises standards for track geometry and safety limits for vehicle response to track conditions, enhances vehicle/track qualification procedures, and adds flexibility for permitting high cant deficiency train operations through curves at conventional speeds. The rule accounts for a range of vehicle types that are currently in operation, as well as vehicle types that may likely be used in future high-speed or high cant deficiency rail operations, or both. The rule is based on the results of simulation studies designed to identify track geometry irregularities associated with unsafe wheel/rail forces and accelerations, thorough reviews of vehicle qualification and revenue service test data, and consideration of international practices.

  17. 75 FR 6070 - Notice of Public Meeting on the International Atomic Energy Agency Basic Safety Standards Version...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-05

    ... Energy Agency Basic Safety Standards Version 3.0, Draft Safety Requirements DS379 AGENCY: Nuclear Regulatory Commission. ACTION: Notice of Public Meeting on the International Atomic Energy Agency Basic... development of U.S. Government comments on this International Atomic Energy Agency (IAEA) draft General Safety...

  18. Food safety regulations in Australia and New Zealand Food Standards.

    PubMed

    Ghosh, Dilip

    2014-08-01

    Citizens of Australia and New Zealand recognise that food security is a major global issue. Food security also affects Australia and New Zealand's status as premier food exporting nations and the health and wellbeing of the Australasian population. Australia is uniquely positioned to help build a resilient food value chain and support programs aimed at addressing existing and emerging food security challenges. The Australian food governance system is fragmented and less transparent, being largely in the hands of government and semi-governmental regulatory authorities. The high level of consumer trust in Australian food governance suggests that this may be habitual and taken for granted, arising from a lack of negative experiences of food safety. In New Zealand the Ministry of Primary Industries regulates food safety issues. To improve trade and food safety, New Zealand and Australia work together through Food Standards Australia New Zealand (FSANZ) and other co-operative agreements. Although the potential risks to the food supply are dynamic and constantly changing, the demand, requirement and supply for providing safe food remains firm. The Australasian food industry will need to continually develop its system that supports the food safety program with the help of scientific investigations that underpin the assurance of what is and is not safe. The incorporation of a comprehensive and validated food safety program is one of the total quality management systems that will ensure that all areas of potential problems are being addressed by industry. © 2014 Society of Chemical Industry.

  19. Software Safety Risk in Legacy Safety-Critical Computer Systems

    NASA Technical Reports Server (NTRS)

    Hill, Janice L.; Baggs, Rhoda

    2007-01-01

    Safety Standards contain technical and process-oriented safety requirements. Technical requirements are those such as "must work" and "must not work" functions in the system. Process-Oriented requirements are software engineering and safety management process requirements. Address the system perspective and some cover just software in the system > NASA-STD-8719.13B Software Safety Standard is the current standard of interest. NASA programs/projects will have their own set of safety requirements derived from the standard. Safety Cases: a) Documented demonstration that a system complies with the specified safety requirements. b) Evidence is gathered on the integrity of the system and put forward as an argued case. [Gardener (ed.)] c) Problems occur when trying to meet safety standards, and thus make retrospective safety cases, in legacy safety-critical computer systems.

  20. 50 CFR 600.355 - National Standard 10-Safety of Life at Sea.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 50 Wildlife and Fisheries 12 2013-10-01 2013-10-01 false National Standard 10-Safety of Life at Sea. 600.355 Section 600.355 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE MAGNUSON-STEVENS ACT PROVISIONS National...

  1. 29 CFR 5.8 - Liquidated damages under the Contract Work Hours and Safety Standards Act.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 1 2011-07-01 2011-07-01 false Liquidated damages under the Contract Work Hours and Safety... APPLICABLE TO NONCONSTRUCTION CONTRACTS SUBJECT TO THE CONTRACT WORK HOURS AND SAFETY STANDARDS ACT) Davis-Bacon and Related Acts Provisions and Procedures § 5.8 Liquidated damages under the Contract Work Hours...

  2. 29 CFR 5.8 - Liquidated damages under the Contract Work Hours and Safety Standards Act.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 1 2010-07-01 2010-07-01 true Liquidated damages under the Contract Work Hours and Safety... APPLICABLE TO NONCONSTRUCTION CONTRACTS SUBJECT TO THE CONTRACT WORK HOURS AND SAFETY STANDARDS ACT) Davis-Bacon and Related Acts Provisions and Procedures § 5.8 Liquidated damages under the Contract Work Hours...

  3. Is "Safety-in-numbers" theory applies to the pattern of pedestrian accidents in Seoul, South Korea.

    NASA Astrophysics Data System (ADS)

    Choi, Y.; Yoon, H.

    2016-12-01

    Every year, about 1.25 million people die of vehicle-related accidents, among which half are pedestrians with higher vulnerability: pedestrian, cyclists and motorcyclist (World Health Organization, 2016). This urges city governments in the world to strive for pedestrian safety and to apply diverse theories to transportation planning and design. The common belief is that the number of pedestrian accidents is directly and positively associated with the volume of pedestrian, however, another hypothesis, called "safety-in-numbers" effect, tells an opposite story in that accident rates declines with increase of the volume of pedestrian. In this study, we examine first, whether the safety-in-numbers theory applies to the pattern of pedestrian accidents in Seoul, and second, further investigate environmental factors that are associated with the pedestrian safety. On the first count, we use geospatial statistical analyses of the multi-year pedestrian accident data collected by Korea Road Traffic Authority (KoRoad) and the pedestrian volume data collected by SK Telecom (SKT). With Kernel Density Estimation and Bivariate Local Moran's I, we identify spatial clustering of pedestrian accidents in the city, and examine whether those locations match with concentrations of pedestrian volume. On the second count, we use statistical analysis, tobit, poisson and negative binomial regression to investigate relationships between pedestrian volume and number of pedestrian accident for the two types of geographic areas by the results of the aforementioned analysis; Area 1- locations of high volume of pedestrian with high number of accident, Area 2- locations of high volume of pedestrian with low number of accident. For environmental factors potentially explaining pedestrian accidents, we include land use composition, number of traffic lanes, crosswalk presence, pedestrian signal, traffic island and sidewalk width in our analysis. This research will be valuable in city governments

  4. 48 CFR 52.222-4 - Contract Work Hours and Safety Standards Act-Overtime Compensation.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... work over 40 hours in any workweek unless they are paid at least 1 and 1/2 times the basic rate of pay... excess of the standard workweek of 40 hours without paying overtime wages required by the Contract Work... CLAUSES Text of Provisions and Clauses 52.222-4 Contract Work Hours and Safety Standards Act—Overtime...

  5. 77 FR 43811 - Submission for OMB Review; Comment Request-Safety Standards for Full-Size Baby Cribs and Non-Full...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-26

    ... CONSUMER PRODUCT SAFETY COMMISSION Submission for OMB Review; Comment Request--Safety Standards for Full-Size Baby Cribs and Non-Full-Size Baby Cribs; Compliance Form AGENCY: Consumer Product Safety Commission. ACTION: Notice. SUMMARY: The Consumer Product Safety Commission (CPSC or Commission) announces...

  6. Modernisation and consolidation of the European radiation protection legislation: the new Euratom Basic Safety Standards Directive.

    PubMed

    Mundigl, Stefan

    2015-04-01

    With the publication of new basic safety standards for the protection against the dangers arising from exposure to ionising radiation, foreseen in Article 2 and Article 30 of the Euratom Treaty, the European Commission modernises and consolidates the European radiation protection legislation. A revision of the Basic Safety Standards was needed in order (1) to take account of the scientific and technological progress since 1996 and (2) to consolidate the existing set of Euratom radiation protection legislation, merging five Directives and upgrading a recommendation to become legally binding. The new Directive offers in a single coherent document basics safety standards for radiation protection, which take account of the most recent advances in science and technology, cover all relevant radiation sources, including natural radiation sources, integrate protection of workers, members of the public, patients and the environment, cover all exposure situations, planned, existing, emergency, and harmonise numerical values with international standards. After the publication of the Directive in the beginning of 2014, Member States have 4 y to transpose the Directive into national legislation and to implement the requirements therein. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  7. Medical Device Plug-and-Play Interoperability Standards and Technology Leadership

    DTIC Science & Technology

    2017-10-01

    Award Number: W81XWH-09-1-0705 TITLE: “Medical Device Plug-and-Play Interoperability Standards and Technology Leadership” PRINCIPAL INVESTIGATOR...Sept 2016 – 20 Sept 2017 4. TITLE AND SUBTITLE “Medical Device Plug-and-Play Interoperability 5a. CONTRACT NUMBER Standards and Technology ...efficiency through interoperable medical technologies . We played a leadership role on interoperability safety standards (AAMI, AAMI/UL Joint

  8. 12 CFR Appendix C to Part 1720 - Policy Guidance; Safety and Soundness Standards for Information

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Standards for Information C Appendix C to Part 1720 Banks and Banking OFFICE OF FEDERAL HOUSING ENTERPRISE..., App. C Appendix C to Part 1720—Policy Guidance; Safety and Soundness Standards for Information A... for Information 1. Information Security Program. 2. Objectives. C—Development and Implementation of...

  9. 29 CFR 1915.8 - OMB control numbers under the Paperwork Reduction Act.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 7 2013-07-01 2013-07-01 false OMB control numbers under the Paperwork Reduction Act. 1915.8 Section 1915.8 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT...

  10. 29 CFR 1915.8 - OMB control numbers under the Paperwork Reduction Act.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false OMB control numbers under the Paperwork Reduction Act. 1915.8 Section 1915.8 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT...

  11. Improving the safety and quality of nursing care through standardized operating procedures in Bosnia and Herzegovina.

    PubMed

    Ausserhofer, Dietmar; Rakic, Severin; Novo, Ahmed; Dropic, Emira; Fisekovic, Eldin; Sredic, Ana; Van Malderen, Greet

    2016-06-01

    We explored how selected 'positive deviant' healthcare facilities in Bosnia and Herzegovina approach the continuous development, adaptation, implementation, monitoring and evaluation of nursing-related standard operating procedures. Standardized nursing care is internationally recognized as a critical element of safe, high-quality health care; yet very little research has examined one of its key instruments: nursing-related standard operating procedures. Despite variability in Bosnia and Herzegovina's healthcare and nursing care quality, we assumed that some healthcare facilities would have developed effective strategies to elevate nursing quality and safety through the use of standard operating procedures. Guided by the 'positive deviance' approach, we used a multiple-case study design to examine a criterion sample of four facilities (two primary healthcare centres and two hospitals), collecting data via focus groups and individual interviews. In each studied facility, certification/accreditation processes were crucial to the initiation of continuous development, adaptation, implementation, monitoring and evaluation of nursing-related SOPs. In one hospital and one primary healthcare centre, nurses working in advanced roles (i.e. quality coordinators) were responsible for developing and implementing nursing-related standard operating procedures. Across the four studied institutions, we identified a consistent approach to standard operating procedures-related processes. The certification/accreditation process is enabling necessary changes in institutions' organizational cultures, empowering nurses to take on advanced roles in improving the safety and quality of nursing care. Standardizing nursing procedures is key to improve the safety and quality of nursing care. Nursing and Health Policy are needed in Bosnia and Herzegovina to establish a functioning institutional framework, including regulatory bodies, educational systems for developing nurses' capacities or the

  12. 78 FR 15920 - Federal Motor Vehicle Safety Standards; Tire Selection and Rims

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-13

    ... [Docket No. NHTSA-2013-0030] RIN 2127-AL24 Federal Motor Vehicle Safety Standards; Tire Selection and Rims...: Notice of proposed rulemaking (NPRM). SUMMARY: This document proposes to amend Federal Motor Vehicle... installed on new trailers with a gross vehicle weight rating (GVWR) of 4,536 kg (10,000 lbs.) or less. It...

  13. Development of national standards related to the integrated safety and security of high-rise buildings

    NASA Astrophysics Data System (ADS)

    Voskresenskaya, Elena; Vorona-Slivinskaya, Lubov

    2018-03-01

    The article considers the issues of developing national standards for high-rise construction. The system of standards should provide industrial, operational, economic and terrorist safety of high-rise buildings and facilities. Modern standards of high-rise construction should set the rules for designing engineering systems of high-rise buildings, which will ensure the integrated security of buildings, increase their energy efficiency and reduce the consumption of resources in construction and operation.

  14. 75 FR 35286 - Agency Information Collection Activities; Proposed Collection; Comment Request; Safety Standard...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-21

    ... instructional literature requirements in the Safety Standard for Infant walkers. DATES: Submit written or... for marking and instructional literature. We estimate the burden of this collection of information as... literature that are disclosure requirements, thus falling within the definition of ``collections of...

  15. Standards Improvement Project-Phase II. Final rule.

    PubMed

    2005-01-05

    The Occupational Safety and Health Administration (OSHA) through this final rule is continuing to remove and revise provisions of its standards that are outdated, duplicative, unnecessary, or inconsistent, or can be clarified or simplified by being written in plain language. The Agency completed Phase I of the Standards Improvement Project in June 1998. In this Phase II of the Standards Improvement Project, OSHA is again revising or removing a number of health provisions in its standards for general industry, shipyard employment, and construction. The Agency believes that the changes streamline and make more consistent the regulatory requirements in OSHA health and safety standards. In some cases, OSHA has made substantive revisions to requirements because they are outdated, duplicative, unnecessary, or inconsistent with more recently promulgated health standards. The Agency believes these revisions will reduce regulatory requirements for employers without reducing employee protection.

  16. The role of evidence, standards and education in rock fishing safety in New South Wales, Australia.

    PubMed

    Mitchell, Rebecca J; Ware, Lauren; Bambach, Mike R

    2014-12-01

    To examine rock fishing-related fatalities and hospitalisations, identify initiatives aimed at improving safety and survey key rock fishing stakeholders about the strengths and limitations of each initiative. This research obtained information from mortality and hospitalisation statistics, the published literature and key stakeholders for opinions on the strengths, limitations and improvements for rock fishing safety initiatives. Injury patterns involving rock fishers have largely remained unchanged over time. The literature revealed that many rock fishing safety initiatives focused on awareness raising and engineering initiatives, but ignored the development of guidelines and the use of enforcement strategies. There had been limited evaluations conducted of any of the initiatives reviewed. It is likely that a combination of evidence-based, standard-focused and education initiatives would be useful in improving rock fishing safety in NSW, provided that the impact of these initiatives were routinely evaluated. Information from this research will be used to inform preventive strategies aimed at improving rock fishing safety through better coordination of the role of evidence in informing standards and practices and the continued evaluation of these initiatives. © 2014 Public Health Association of Australia.

  17. Slow progress on meeting hospital safety standards: learning from the Leapfrog Group's efforts.

    PubMed

    Moran, John; Scanlon, Dennis

    2013-01-01

    In response to the Institute of Medicine's To Err Is Human report on the prevalence of medical errors, the Leapfrog Group, an organization that promotes hospital safety and quality, established a voluntary hospital survey assessing compliance with several safety standards. Using data from the period 2002-07, we conducted the first longitudinal assessment of how hospitals in specific cities and states initially selected by Leapfrog progressed on public reporting and adoption of standards requiring the use of computerized drug order entry and hospital intensivists. Overall, little progress was observed. Reporting rates were unchanged over the study period. Adoption of computerized drug order entry increased from 2.94 percent to 8.13 percent, and intensivist staffing increased from 14.74 percent to 21.40 percent. These findings should not be viewed as an indictment of Leapfrog but may reflect various challenges. For example, hospitals faced no serious threats to their market share if purchasers shifted business away from those that either didn't report data or didn't meet the standards. In the absence of mandatory reporting, policy makers might need to act to address these challenges to ensure improvements in quality.

  18. Traceability of Software Safety Requirements in Legacy Safety Critical Systems

    NASA Technical Reports Server (NTRS)

    Hill, Janice L.

    2007-01-01

    How can traceability of software safety requirements be created for legacy safety critical systems? Requirements in safety standards are imposed most times during contract negotiations. On the other hand, there are instances where safety standards are levied on legacy safety critical systems, some of which may be considered for reuse for new applications. Safety standards often specify that software development documentation include process-oriented and technical safety requirements, and also require that system and software safety analyses are performed supporting technical safety requirements implementation. So what can be done if the requisite documents for establishing and maintaining safety requirements traceability are not available?

  19. Introducing standardized “readbacks” to improve patient safety in surgery: a prospective survey in 92 providers at a public safety-net hospital

    PubMed Central

    2012-01-01

    Background Communication breakdowns represent the main root cause of preventable complications which lead to harm to surgical patients. Standardized readbacks have been successfully implemented as a main pillar of professional aviation safety for decades, to ensure a safe closed-loop communication between air traffic control and individual pilots. The present study was designed to determine the perception of staff in perioperative services regarding the role of standardized readbacks for improving patient safety in surgery at a single public safety-net hospital and level 1 trauma center. Methods A 12-item questionnaire was sent to 180 providers in perioperative services at Denver Health Medical Center. The survey was designed to determine the individual participants’ perception of (1) appropriateness of current readback processes; (2) willingness to attend a future training module on this topic; (3) specific scenarios in which readbacks may be effective; and (4) perceived major barriers to the implementation of standardized readbacks. Survey results were compared between departments (surgery versus anesthesia) and between specific staff roles (attending or midlevel provider, resident physician, nursing staff), using non-parametric tests. Results The response rate to the survey was 50.1 % (n = 92). Respondents overwhelmingly recognized the role of readbacks in reducing communication errors and improving patient safety. There was a strong agreement among respondents to support participation in a readbacks training program. There was no difference in the responses between the surgery and anesthesia departments. There was a statistically significant difference in the healthcare providers willingness to attend a short training module on readbacks (p < 0.001). Resident physicians were less likely to endorse the importance of readbacks in reducing communication errors (p = 0.01) and less willing to attend a short training module on readbacks (p < 0

  20. Safety in numbers? Investigating Australian driver behaviour, knowledge and attitudes towards cyclists.

    PubMed

    Johnson, Marilyn; Oxley, Jennie; Newstead, Stuart; Charlton, Judith

    2014-09-01

    A key tenet of the safety in numbers theory is that as the number of people cycling increases, more drivers will also be cyclists and therefore will give greater consideration to cyclists when driving. We tested this theory in relation to self-reported behaviour, attitudes and knowledge in relation to cycling. An online survey was conducted of Australian drivers (n=1984) who were also cyclists (cyclist-drivers) and drivers who did not cycle (drivers). Cyclist-drivers were 1.5 times more likely than drivers to report safe driving behaviours related to sharing the roads with cyclists (95% CI: 1.1-1.9, p<0.01). Cyclist-drivers had better knowledge of the road rules related to cycling infrastructure than drivers; however knowledge of road rules related to bike lanes was low for both groups. Drivers were more likely than cyclist-drivers to have negative attitudes (e.g. cyclists are unpredictable and repeatedly overtaking cyclists is frustrating). Findings from this study highlight the need for increased education and awareness in relation to safe driving behaviour, road rules and attitudes towards cyclists. Specific recommendations are made for approaches to improve safety for cyclists. Copyright © 2014. Published by Elsevier Ltd.

  1. Health and safety needs in early care and education programs: what do directors, child health records, and national standards tell us?

    PubMed

    Alkon, Abbey; To, Kim; Mackie, Joanna F; Wolff, Mimi; Bernzweig, Jane

    2010-01-01

    To identify the overlapping and unique health and safety needs and concerns identified by early care and education (ECE) directors, health records, and observed compliance with national health and safety (NHS) standards. Cross-sectional study. 127 ECE programs from 5 California counties participated in the study, including 118 directors and 2,498 children's health records. Qualitative data were collected using standardized ECE directors' interviews to identify their health and safety concerns; and objective, quantitative data were collected using child health record reviews to assess regular health care, immunizations, health insurance, special health care needs, and screening tests and an observation Checklist of 66 key NHS standards collected by research assistants. The overlapping health and safety needs and concerns identified by the directors and through observations were hygiene and handwashing, sanitation and disinfection, supervision, and the safety of indoor and outdoor equipment. Some of the health and safety needs identified by only one assessment method were health and safety staff training, medical plans for children with special health care needs and follow-up on positive screening tests. Comprehensive, multimethod assessments are useful to identify health and safety needs and develop public health nursing interventions for ECE programs.

  2. 16 CFR 1115.5 - Reporting of failures to comply with a voluntary consumer product safety standard relied upon by...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... voluntary consumer product safety standard relied upon by the Commission under section 9 of the CPSA. 1115.5 Section 1115.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SUBSTANTIAL PRODUCT HAZARD REPORTS General Interpretation § 1115.5 Reporting of failures to comply...

  3. The relationship between patient safety climate and standard precaution adherence: a systematic review of the literature

    PubMed Central

    Hessels, Amanda; Larson, Elaine

    2015-01-01

    SUMMARY Standard precaution (SP) adherence is universally suboptimal, despite being a core component of healthcare-associated infection (HCAI) prevention and healthcare worker (HCW) safety. Emerging evidence suggests that patient safety climate (PSC) factors may improve HCW behaviours. Our aim was to examine the relationship between PSC and SP adherence by HCWs in acute care hospitals. A systematic review was conducted as guided by the Preferred Reporting Items for Systematic Reviews and Meta-Analysis. Three electronic databases were comprehensively searched for literature published or available in English between 2000 and 2014. Seven of 888 articles identified were eligible for final inclusion in the review. Two reviewers independently assessed study quality using a validated quality tool. The seven articles were assigned quality scores ranging from 7 to 10 of 10 possible points. Five measured all aspects of SP and two solely measured needlestick and sharps handling. Three included a secondary outcome of HCW exposure; none included HCAIs. All reported a statistically significant relationship between better PSC and greater SP adherence and used data from self-report surveys including validated PSC measures or measures of management support and leadership. Although limited in number, studies were of high quality and confirmed that PSC and SP adherence were correlated, suggesting that efforts to improve PSC may enhance adherence to a core component of HCAI prevention and HCW safety. More clearly evident is the need for additional high-quality research. PMID:26549480

  4. Opinions on Fresh Produce Food Safety and Quality Standards by Fresh Produce Supply Chain Experts from the Global South and North.

    PubMed

    Jacxsens, Liesbeth; Van Boxstael, Sigrid; Nanyunja, Jessica; Jordaan, Danie; Luning, Pieternel; Uyttendaele, Mieke

    2015-10-01

    This study describes the results of an on-line survey of fresh produce supply chain experts who work with producers from the Global North (n = 41, 20 countries) and the Global South (n = 63, 29 countries). They expressed their opinion using 1 to 5 Likert scales on several items related to four types of food safety and quality standards and legislation: Codex Alimentarius standards, European Union legislation, national legislation, and private standards. The results reflect the different circumstances under which the Southern and Northern producers operate in relation to the local organization, regulation, and support of the sector; but they also indicate similar challenges, in particular, the challenge of private standards, which were perceived to demand a higher implementation effort than the other three types of standards. Private standards were also strongly perceived to exclude Southern and Northern small- and medium-scale producers from high-value markets, whereas European Union legislation was perceived to strongly exclude, in particular, small- and medium-scale Southern producers. The results further highlight concerns about costly control measures and third-party certification that are required by downstream buyers but that are mostly paid for by upstream suppliers. Food standards are seen in their dual role as a catalyst for implementation of structured food safety management systems on the one hand and as a nontariff barrier to trade on the other hand. The results of the survey also pointed up the advantages of enforcing food safety and food quality standards in terms of knowledge spillover to noncertified activities, increased revenues, and improved food safety of delivered produce. Survey results highlight the importance of technical assistance and support of producers by governments and producer cooperatives or trade associations in the implementation and certification of food standards, along with increased awareness of and training of individuals in

  5. The consistency of standard cosmology and the BATSE number versus brightness relation

    NASA Technical Reports Server (NTRS)

    Wickramasinghe, W. A. D. T.; Nemiroff, R. J.; Norris, J. P.; Kouveliotou, C.; Fishman, G. J.; Meegan, C. A.; Wilson, R. B.; Paciesas, W. S.

    1993-01-01

    The integrated number-peak-flux relation measured by the Burst and Transient Source Experiment (BATSE) on board the Compton Gamma Ray Observatory is compared with several standard cosmological distributions for gamma-ray bursts (GRBs). Friedmann-Robertson-Walker models were used along with the assumption that the bursts are standard candles and have no number or luminosity evolution. For a given Omega spectral shape, we used a free parameter, essentially the comoving number density of bursts, to generate a best fit between the cosmology and the measured relation. Our results are shown for a subsample of the first 260 GRBs recorded by BATSE. We find acceptable fits between simple cosmological models and the brightness distribution data, as determined by the Kolmogorov-Smirnov one-distribution statistical test. One cannot distinguish a single best cosmological model from the goodness of the fits. The best fit implies that BATSE GRBs are complete out to a redshift of about unity. However, significantly higher and lower redshifts, by as much as a factor of 2, are possible for other marginally acceptable fits.

  6. Safety words inventory and literacy screener: standardization and validation.

    PubMed

    Glascoe, Frances Page

    2002-01-01

    When evaluating a school-aged patient, particularly for such issues as attention deficit disorder, or learning disabilities, health-care providers are encouraged to appraise children's school performance. Although some clinicians seek teachers' comments, recent research suggests that teachers' appraisals have limited value. As a consequence, health-care providers need brief methods, functional for busy primary care clinics, for detecting school problems. Because well-visits also include other services such as anticipatory guidance and safety and injury counseling, it would be helpful for detection tools to facilitate delivery of more than one aspect of well-child care. This study was undertaken to develop a brief method for evaluating school performance for elementary-age children and test its accuracy in identifying children with reading and other academic problems. By using common safety signs as the test stimuli, such a tool should also serve as a springboard to injury prevention counseling. Data were drawn from the standardization and validation data of an individually administered wide-range diagnostic achievement test using a geographically diverse, nationally representative sample of 934 children between 5 and 13 years of age. Children were administered the Comprehensive Inventory of Basic Skills-Revised (CIBS-R), which includes among its 10 subtests a 57-item measure of safety word recognition. Data were collected from previously administered measures of academics and intelligence. Forty-one children were administered the measure twice to assess inter-rater reliability. Logistic regression analyses were deployed using children's performance on the nine other subtests of the CIBS-R as the grouping variable, and as predictors, recognition of 57 safety words/phrases. Of these, 22 safety signs (e.g., "Keep out," "No Trespassing," "Danger") were significant predictors of overall academic performance. An additional seven safety words were added due to their

  7. Confidence in the safety of standard childhood vaccinations among New Zealand health professionals.

    PubMed

    Lee, Carol; Duck, Isabelle; Sibley, Chris G

    2018-05-04

    To investigate the level of confidence in the safety of standard childhood vaccinations among health professionals in New Zealand. Data from the 2013/14 New Zealand Attitudes and Values Study (NZAVS) was used to investigate the level of agreement that "it is safe to vaccinate children following the standard New Zealand immunisation schedule" among different classes of health professionals (N=1,032). Most health professionals showed higher levels of vaccine confidence, with 96.7% of those describing their occupation as GP or simply 'doctor' (GPs/doctor) and 90.7% of pharmacists expressing strong vaccine confidence. However, there were important disparities between some other classes of health professionals, with only 65.1% of midwives and 13.6% of practitioners of alternative medicine expressing high vaccine confidence. As health professionals are a highly trusted source of vaccine information, communicating the consensus of belief among GPs/doctors that vaccines are safe may help provide reassurance for parents who ask about vaccine safety. However, the lower level of vaccine confidence among midwives is a matter of concern that may have negative influence on parental perceptions of vaccinations.

  8. Leading Edge. Volume 7, Number 3. Systems Safety Engineering

    DTIC Science & Technology

    2010-01-01

    solvents during manu- facturing • Toxic gas and noise resulting from weapon firing • Cadmium exposure associated with han- dling of corroded equipment...California • System Safety certificate ◆ University of Southern California • Master of Science degree in Safety Sciences ◆ Indiana University of...Master of Science degree program in Health and Safety, with a Specialization in Occupa- tional Safety Management ◆ Indiana State University, Distance

  9. Alcohol/safety public information materials catalog. Number 5

    DOT National Transportation Integrated Search

    1981-06-01

    Author's abstract: The Alcohol/Safety Public Information Materials Catalog is designed for use by persons developing public information programs on alcohol and highway safety. It lists materials produced for campaigns along with journal articles and ...

  10. 38 CFR 17.155 - Minimum standards of safety and quality for automotive adaptive equipment.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... justify development of formal standards, such equipment will be inspected and, if in order, approved for... safety and quality for automotive adaptive equipment. 17.155 Section 17.155 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS MEDICAL Automotive Equipment and Driver Training § 17.155...

  11. Safety management as a foundation for evidence-based aeromedical standards and reporting of medical events.

    PubMed

    Evans, Anthony D; Watson, Dougal B; Evans, Sally A; Hastings, John; Singh, Jarnail; Thibeault, Claude

    2009-06-01

    The different interpretations by States (countries) of the aeromedical standards established by the International Civil Aviation Organization has resulted in a variety of approaches to the development of national aeromedical policy, and consequently a relative lack of harmonization. However, in many areas of aviation, safety management systems have been recently introduced and may represent a way forward. A safety management system can be defined as "A systematic approach to managing safety, including the necessary organizational structures, accountabilities, policies, and procedures" (1). There are four main areas where, by applying safety management principles, it may be possible to better use aeromedical data to enhance flight safety. These are: 1) adjustment of the periodicity and content of routine medical examinations to more accurately reflect aeromedical risk; 2) improvement in reporting and analysis of routine medical examination data; 3) improvement in reporting and analysis of in-flight medical events; and 4) support for improved reporting of relevant aeromedical events through the promotion of an appropriate culture by companies and regulatory authorities. This paper explores how the principles of safety management may be applied to aeromedical systems to improve their contribution to safety.

  12. Overview of the U.S. DOE Hydrogen Safety, Codes and Standards Program. Part 4: Hydrogen Sensors; Preprint

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Buttner, William J.; Rivkin, Carl; Burgess, Robert

    Hydrogen sensors are recognized as a critical element in the safety design for any hydrogen system. In this role, sensors can perform several important functions including indication of unintended hydrogen releases, activation of mitigation strategies to preclude the development of dangerous situations, activation of alarm systems and communication to first responders, and to initiate system shutdown. The functionality of hydrogen sensors in this capacity is decoupled from the system being monitored, thereby providing an independent safety component that is not affected by the system itself. The importance of hydrogen sensors has been recognized by DOE and by the Fuel Cellmore » Technologies Office's Safety and Codes Standards (SCS) program in particular, which has for several years supported hydrogen safety sensor research and development. The SCS hydrogen sensor programs are currently led by the National Renewable Energy Laboratory, Los Alamos National Laboratory, and Lawrence Livermore National Laboratory. The current SCS sensor program encompasses the full range of issues related to safety sensors, including development of advance sensor platforms with exemplary performance, development of sensor-related code and standards, outreach to stakeholders on the role sensors play in facilitating deployment, technology evaluation, and support on the proper selection and use of sensors.« less

  13. The Coast Guard Proceedings of the Marine Safety and Security Council: Spring 2016

    DTIC Science & Technology

    2016-04-01

    PROCEEDINGS Spring 2016 Vol. 73, Number 1 Safety Management System Objectives 6 Safety Management Facilitates Safe Vessel Operation Vessel systems...crew, and operations. by LCDR Aaron W. Demo 9 Safety Management Systems to Prevent Pollution from Ships Standard procedures protect the environment...by LCDR Michael Lendvay 11 Dead Reckoning by Safety Management ? Check your course. by LCDR Corydon F. Heard IV Safety Management Systems and the Outer

  14. 78 FR 52679 - Safety Standard for Cigarette Lighters; Adjusted Customs Value for Cigarette Lighters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-26

    ... Customs Value for Cigarette Lighters AGENCY: Consumer Product Safety Commission. ACTION: Final rule... refillable lighters that use butane or similar fuels and have a Customs Value or ex-factory price below a threshold value (initially set at $2.00 in 1993). The standard provides that the initial $2.00 value adjusts...

  15. Investigating the influence on safety of retrofitting Italian motorways with barriers meeting a new EU standard.

    PubMed

    Cafiso, Salvatore; D'Agostino, Carmelo; Persaud, Bhagwant

    2017-04-03

    A new European Union (EU) regulation for safety barriers, which is based on performance, has encouraged road agencies to perform an upgrade of old barriers, with the expectation that there will be safety benefits at the retrofitted sites. The new class of barriers was designed and installed in compliance with the 1998 (European Norm) EN 1317 standards for road restraint systems, which lays down common requirements for the testing and certification of road restraint systems in all countries of the European Committee for Standardization (CEN). Both the older and new barriers are made of steel and are installed in such a way as to avoid vehicle intrusion, but the older ones are thought to be only effective at low speeds and large angles of impact. The new standard seeks to remedy this by providing better protection at higher speeds. This article seeks to quantify the effect on the frequency of fatal and injury crashes of retrofitting motorways with barriers meeting the new standards. The estimation of the crash modification was carried out by performing an empirical Bayes before-after analysis based on data from the A18 Messina-Catania motorway in Italy. The methodology has the great advantage to account for the regression to the mean effects. Besides, to account for time trend effects and dispersion of crash data, a modified calibration methodology of safety performance was used. This study, based on data collected on 76 km of motorway in the period 2000-2012, derived Crash Modification Factor point estimates that indicate reductions of 72% for run-off-road fatal and injury crashes and 38% in total fatal and injury crashes that could be expected by upgrading an old safety barrier by complying with new EU 1317 standards. The estimated benefit-cost ratio of 5.57 for total crashes indicates that the treatment is cost effective. The magnitude of this benefit indicates that the retrofits are cost-effective even for total crashes and should continue in any European country

  16. Assessing the Relative Influence and Efficacy of Public and Private Food Safety Regulation Regimes: Comparing Codex and Global G.A.P. Standards.

    PubMed

    Halabi, Sam F; Lin, Ching-Fu

    An extensive global system of private food regulation is under construction, one that exceeds conventional regulation thought of as being driven by public authorities like FDA and USDA in the U.S. or the Food Standards Agency in the UK. Agrifood and grocer organizations, in concert with some farming groups, have been the primary designers of this new food regulatory regime. These groups have established alliances that compete with national regulators in complex ways. This article analyzes the relationship between public and private sources of food safety regulation by examining standards adopted by the Codex Alimentarius Commission, a food safety organization jointly run by the Food and Agricultural Organization and the World Health Organization and GlobalG.A.P., a farm assurance program created in the late 1990s by supermarket chains and their major suppliers which has now expanded into a global certifying coalition. While Codex standards are adopted, often as written, by national food safety regulators who are principal drivers of the standard setting process, customers for agricultural products in many countries now demand evidence of GlobalG.A.P. certification as a prerequisite for doing business This article tests not only the durability and strength of private sector standard setting in the food safety system, but also the desirability of that system as an alternative to formal, governmental processes embodied, for our purposes, in the standards adopted by Codex. In many cases, official standards and GlobalG.A.P. standards clash in ways that implicate not only food safety but the flow of agricultural products in the global trading system. The article analyzes current weaknesses in both regimes and possibilities for change that will better reconcile the two competing systems.

  17. Challenges of standardized continuous quality improvement programs in community pharmacies: the case of SafetyNET-Rx.

    PubMed

    Boyle, Todd A; MacKinnon, Neil J; Mahaffey, Thomas; Duggan, Kellie; Dow, Natalie

    2012-01-01

    Research on continuous quality improvement (CQI) in community pharmacies lags in comparison to service, manufacturing, and various health care sectors. As a result, very little is known about the challenges community pharmacies face when implementing CQI programs in general, let alone the challenges of implementing a standardized and technologically sophisticated one. This research identifies the initial challenges of implementing a standardized CQI program in community pharmacies and how such challenges were addressed by pharmacy staff. Through qualitative interviews, a multisite study of the SafetyNET-Rx CQI program involving community pharmacies in Nova Scotia, Canada, was performed to identify such challenges. Interviews were conducted with the CQI facilitator (ie, staff pharmacist or technician) in 55 community pharmacies that adopted the SafetyNET-Rx program. Of these 55 pharmacies, 25 were part of large national corporate chains, 22 were part of banner chains, and 8 were independent pharmacies. A total of 10 different corporate chains and banners were represented among the 55 pharmacies. Thematic content analysis using well-established coding procedures was used to explore the interview data and elicit the key challenges faced. Six major challenges were identified, specifically finding time to report, having all pharmacy staff involved in quality-related event (QRE) reporting, reporting apprehensiveness, changing staff relationships, meeting to discuss QREs, and accepting the online technology. Challenges were addressed in a number of ways including developing a manual-online hybrid reporting system, managers paying staff to meet after hours, and pharmacy managers showing visible commitment to QRE reporting and learning. This research identifies key challenges to implementing CQI programs in community pharmacies and also provides a starting point for future research relating to how the challenges of QRE reporting and learning in community pharmacies change

  18. Analysis of the safety profile of treatment with a large number of shock waves per session in extracorporeal lithotripsy.

    PubMed

    Budía Alba, A; López Acón, J D; Polo-Rodrigo, A; Bahílo-Mateu, P; Trassierra-Villa, M; Boronat-Tormo, F

    2015-06-01

    To assess the safety of increasing the number of waves per session in the treatment of urolithiasis using extracorporeal lithotripsy. Prospective, comparative, nonrandomized parallel study of patients with renoureteral lithiasis and an indication for extracorporeal lithotripsy who were consecutively enrolled between 2009 and 2010. We compared group I (160 patients) treated on schedule with a standard number of waves/session (mean 2858,3±302,8) using a Dornier lithotripter U/15/50 against group II (172 patients) treated with an expanded number of waves/session (mean, 6728,9±889,6) using a Siemens Modularis lithotripter. The study variables were age, sex, location, stone size, number of waves/session and total number of waves to resolution, stone-free rate (SFR) and rate of complications (Clavien-Dindo classification). Student's t-test and the chi-squared test were employed for the statistical analysis. The total rate of complications was 11.9% and 10.46% for groups I and II, respectively (P=.39). All complications were minor (Clavien-Dindo grade I). The most common complications were colic pain and hematuria in groups I and II, respectively, with a similar treatment intolerance rate (P>.05). The total number of waves necessary was lower in group II than in group I (P=.001), with SFRs of 96.5% and 71.5%, respectively (P=.001). Treatment with an expanded number of waves per session in extracorporeal lithotripsy does not increase the rate of complications or their severity. However, it could increase the overall effectiveness of the treatment. Copyright © 2014 AEU. Publicado por Elsevier España, S.L.U. All rights reserved.

  19. Provisional standards of radiation safety of flight personnel and passengers in air transport of the civil aviation

    NASA Technical Reports Server (NTRS)

    1977-01-01

    Provisional standards for radiation affecting passenger aircraft are considered. Agencies responsible for seeing that the regulations are enforced are designated while radiation sources and types of radiation are defined. Standard levels of permissible radiation are given and conditions for radiation safety are discussed. Dosimetric equipment on board aircraft is delineated and regulation effective dates are given.

  20. Immunization safety in US print media, 1995-2005.

    PubMed

    Hussain, Hamidah; Omer, Saad B; Manganello, Jennifer A; Kromm, Elizabeth Edsall; Carter, Terrell C; Kan, Lilly; Stokley, Shannon; Halsey, Neal A; Salmon, Daniel A

    2011-05-01

    To identify and describe vaccine safety in US newspaper articles. Articles (1147) from 44 states and Washington, DC, between January 1, 1995, and July 15, 2005, were identified by using the search terms "immunize or vaccine" and "adverse events or safety or exemption or danger or risk or damage or injury or side effect" and were coded by using a standardized data-collection instrument. The mean number of vaccine-safety articles per state was 26. Six (not mutually exclusive) topics were identified: vaccine-safety concerns (46%); vaccine policy (44%); vaccines are safe (20%); immunizations are required (10%); immunizations are not required (8%); and state/school exemption (8%). Three spikes in the number of newspaper articles about vaccine-safety issues were observed: in 1999 regarding rotavirus vaccine and in 2002 and 2003 regarding smallpox vaccine. Excluding articles that referred to rotavirus and smallpox vaccines, 37% of the articles had a negative take-home message. Ongoing monitoring of news on vaccine safety may help the content and framing of vaccine-safety messages.

  1. The History of Infant Formula: Quality, Safety, and Standard Methods.

    PubMed

    Wargo, Wayne F

    2016-01-01

    Food-related laws and regulations have existed since ancient times. Egyptian scrolls prescribed the labeling needed for certain foods. In ancient Athens, beer and wines were inspected for purity and soundness, and the Romans had a well-organized state food control system to protect consumers from fraud or bad produce. In Europe during the Middle Ages, individual countries passed laws concerning the quality and safety of eggs, sausages, cheese, beer, wine, and bread; some of these laws still exist today. But more modern dietary guidelines and food regulations have their origins in the latter half of the 19th century when the first general food laws were adopted and basic food control systems were implemented to monitor compliance. Around this time, science and food chemistry began to provide the tools to determine "purity" of food based primarily on chemical composition and to determine whether it had been adulterated in any way. Since the key chemical components of mammalian milk were first understood, infant formulas have steadily advanced in complexity as manufacturers attempt to close the compositional gap with human breast milk. To verify these compositional innovations and ensure product quality and safety, infant formula has become one of the most regulated foods in the world. The present paper examines the historical development of nutritional alternatives to breastfeeding, focusing on efforts undertaken to ensure the quality and safety from antiquity to present day. The impact of commercial infant formulas on global regulations is addressed, along with the resulting need for harmonized, fit-for-purpose, voluntary consensus standard methods.

  2. National Dam Safety Program. Lake Muskoday Dam (Inventory Number N.Y. 341) Delaware River Basin, Sullivan County, New York. Phase I Inspection Report,

    DTIC Science & Technology

    1981-09-14

    DACW-51-81-C-0006 . PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT PROJECT. TASK AREA & WORK UNIT NUMBERS ~ Flaherty-Giauara Associates...olie It neceary and Idontily b block number) Dam Safety National Dam Safety Program Visual Inspection Lake Muskoday Dam Hydrology, Structural Stability...DELAWARE RIVER BASIN LAKE MUSKODAY DAM SULLIVAN COUNTY, NEW YORK INVENTORY No.NY341 PHASE I INSPECTION REPORT NATIONAL DAM SAFETY PROGRAM J T C NEW YORK

  3. 75 FR 3483 - Proposed Information Collection; OMB Control Number 1018-0129; Captive Wildlife Safety Act

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-21

    ... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R9-LE-2010-N008] [99011-1220-0000-9B] Proposed Information Collection; OMB Control Number 1018-0129; Captive Wildlife Safety Act AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice; request for comments. SUMMARY: We (Fish and Wildlife Service...

  4. The labor movement's role in gaining federal safety and health standards to protect America's workers.

    PubMed

    Weinstock, Deborah; Failey, Tara

    2014-11-01

    In the United States, unions sometimes joined by worker advocacy groups (e.g., Public Citizen and the American Public Health Association) have played a critical role in strengthening worker safety and health protections. They have sought to improve standards that protect workers by participating in the rulemaking process, through written comments and involvement in hearings; lobbying decision-makers; petitioning the Department of Labor; and defending improved standards in court. Their efforts have culminated in more stringent exposure standards, access to information about the presence of potentially hazardous toxic chemicals, and improved access to personal protective equipment-further improving working conditions in the United States.

  5. 12 CFR Appendix C to Part 1720 - Policy Guidance; Safety and Soundness Standards for Information

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... for Information C Appendix C to Part 1720 Banks and Banking OFFICE OF FEDERAL HOUSING ENTERPRISE..., App. C Appendix C to Part 1720—Policy Guidance; Safety and Soundness Standards for Information A... for Information 1. Information Security Program. 2. Objectives. C—Development and Implementation of...

  6. 12 CFR Appendix C to Part 1720 - Policy Guidance; Safety and Soundness Standards for Information

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... for Information C Appendix C to Part 1720 Banks and Banking OFFICE OF FEDERAL HOUSING ENTERPRISE..., App. C Appendix C to Part 1720—Policy Guidance; Safety and Soundness Standards for Information A... for Information 1. Information Security Program. 2. Objectives. C—Development and Implementation of...

  7. Improving health, safety and energy efficiency in New Zealand through measuring and applying basic housing standards.

    PubMed

    Gillespie-Bennett, Julie; Keall, Michael; Howden-Chapman, Philippa; Baker, Michael G

    2013-08-02

    Substandard housing is a problem in New Zealand. Historically there has been little recognition of the important aspects of housing quality that affect people's health and safety. In this viewpoint article we outline the importance of assessing these factors as an essential step to improving the health and safety of New Zealanders and household energy efficiency. A practical risk assessment tool adapted to New Zealand conditions, the Healthy Housing Index (HHI), measures the physical characteristics of houses that affect the health and safety of the occupants. This instrument is also the only tool that has been validated against health and safety outcomes and reported in the international peer-reviewed literature. The HHI provides a framework on which a housing warrant of fitness (WOF) can be based. The HHI inspection takes about one hour to conduct and is performed by a trained building inspector. To maximise the effectiveness of this housing quality assessment we envisage the output having two parts. The first would be a pass/fail WOF assessment showing whether or not the house meets basic health, safety and energy efficiency standards. The second component would rate each main assessment area (health, safety and energy efficiency), potentially on a five-point scale. This WOF system would establish a good minimum standard for rental accommodation as well encouraging improved housing performance over time. In this article we argue that the HHI is an important, validated, housing assessment tool that will improve housing quality, leading to better health of the occupants, reduced home injuries, and greater energy efficiency. If required, this tool could be extended to also cover resilience to natural hazards, broader aspects of sustainability, and the suitability of the dwelling for occupants with particular needs.

  8. Quality and safety attributes of afghan raisins before and after processing

    PubMed Central

    McCoy, Stacy; Chang, Jun Won; McNamara, Kevin T; Oliver, Haley F; Deering, Amanda J

    2015-01-01

    Raisins are an important export commodity for Afghanistan; however, Afghan packers are unable to export to markets seeking high-quality products due to limited knowledge regarding their quality and safety. To evaluate this, Afghan raisin samples from pre-, semi-, and postprocessed raisins were obtained from a raisin packer in Kabul, Afghanistan. The raisins were analyzed and compared to U.S. standards for processed raisins. The samples tested did not meet U.S. industry standards for embedded sand and pieces of stem, total soluble solids, and titratable acidity. The Afghan raisins did meet or exceed U.S. Grade A standard for the number of cap-stems, percent damaged, crystallization levels, moisture content, and color. Following processing, the number of total aerobic bacteria, yeasts, molds, and total coliforms were within the acceptable limits. Although quality issues are present in the Afghan raisins, the process used to clean the raisins is suitable to maintain food safety standards. PMID:25650241

  9. 77 FR 76003 - Submission for OMB Review; Comment Request-Safety Standard for Omnidirectional Citizens Band Base...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-26

    ... Request--Safety Standard for Omnidirectional Citizens Band Base Station Antennas AGENCY: Consumer Product... antennas. DATES: Written comments on this request for extension of approval of information collection... Citizens Band Base Station Antennas establishes performance requirements for omnidirectional citizens band...

  10. 76 FR 67225 - Agency Information Collection Activities; Submission for OMB Review; Comment Request; Standard on...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-31

    ... (DOL) is submitting the Occupational Safety and Health Administration (OSHA) sponsored information... Regulatory Affairs, Attn: OMB Desk Officer for the Department of Labor, Occupational Safety and Health... Health Administration (OSHA). Title of Collection: Standard on Slings. OMB Control Number: 1218-0223...

  11. 77 FR 20558 - Federal Motor Vehicle Safety Standards; Platform Lifts for Motor Vehicles; Platform Lift...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-05

    ... amendments to the Federal motor vehicle safety standards on platform lift systems for motor vehicles. The... [email protected] . For legal issues, you may contact David Jasinski, Office of the Chief Counsel, NCC... in the Federal Register a final rule establishing FMVSS No. 403, Platform lift systems for motor...

  12. Analysis of medical screening and surveillance in 21 Occupational Safety and Health Administration standards: support for a generic medical surveillance standard.

    PubMed

    Silverstein, M

    1994-09-01

    Twenty-one Occupational Safety and Health Act (OSHA) standards were identified which contain medical service provisions intended to help in the identification and control of harmful health effects of workplace exposures. The utility and effectiveness of these provisions have not previously been evaluated. All 21 standards were reviewed and assigned numerical scores for each of 24 potential medical program elements. Several of these elements were combined to calculate Quality Control, Screening Utility, and Surveillance Utility scores for each standard. Total scores varied greatly, suggesting a lack of consistency and uniformity which was even more obvious when the actual regulatory language was examined. The mean Quality score was only 26% of potential points. Seventeen of 21 standards received less than half the total possible Quality score. When arrayed on a two by two matrix only two standards scored above 50% for both Screening and Surveillance Utility. It was concluded that the medical service provisions in OSHA standards are lacking in consistency and coherence. Two major shortcomings are the lack of quality control elements and the absence of surveillance features which would permit medical program results to be utilized for prevention activities including the identification and control of workplace hazards. A generic occupational medical surveillance standard could address these current weaknesses. Elements of such a generic standard are proposed.

  13. 12 CFR Appendix A to Part 30 - Interagency Guidelines Establishing Standards for Safety and Soundness

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... establish certain safety and soundness standards by regulation or by guideline for all insured depository... rules and regulations to establish deadlines for submission and review of compliance plans. 2 2 For the Office of the Comptroller of the Currency, these regulations appear at 12 CFR part 30; for the Board of...

  14. 12 CFR Appendix A to Part 170 - Interagency Guidelines Establishing Standards for Safety and Soundness

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... agencies) to establish certain safety and soundness standards by regulation or by guideline for all insured... adopted amendments to their rules and regulations to establish deadlines for submission and review of compliance plans.2 2 For the Office of the Comptroller of the Currency, these regulations appear at 12 CFR...

  15. 78 FR 76590 - Physical Qualification of Drivers; Standards; Changes to Vision Exemption Program Criteria

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-18

    ... No. FMCSA-2013-0097] Physical Qualification of Drivers; Standards; Changes to Vision Exemption... CMV drivers for duty, the Agency established a number of physical qualifications for drivers under 49... provisions of the Federal Motor Carrier Safety Regulations, including physical qualification standards...

  16. Mobile phone radiation health risk controversy: the reliability and sufficiency of science behind the safety standards.

    PubMed

    Leszczynski, Dariusz; Xu, Zhengping

    2010-01-27

    There is ongoing discussion whether the mobile phone radiation causes any health effects. The International Commission on Non-Ionizing Radiation Protection, the International Committee on Electromagnetic Safety and the World Health Organization are assuring that there is no proven health risk and that the present safety limits protect all mobile phone users. However, based on the available scientific evidence, the situation is not as clear. The majority of the evidence comes from in vitro laboratory studies and is of very limited use for determining health risk. Animal toxicology studies are inadequate because it is not possible to "overdose" microwave radiation, as it is done with chemical agents, due to simultaneous induction of heating side-effects. There is a lack of human volunteer studies that would, in unbiased way, demonstrate whether human body responds at all to mobile phone radiation. Finally, the epidemiological evidence is insufficient due to, among others, selection and misclassification bias and the low sensitivity of this approach in detection of health risk within the population. This indicates that the presently available scientific evidence is insufficient to prove reliability of the current safety standards. Therefore, we recommend to use precaution when dealing with mobile phones and, whenever possible and feasible, to limit body exposure to this radiation. Continuation of the research on mobile phone radiation effects is needed in order to improve the basis and the reliability of the safety standards.

  17. Mobile phone radiation health risk controversy: the reliability and sufficiency of science behind the safety standards

    PubMed Central

    2010-01-01

    There is ongoing discussion whether the mobile phone radiation causes any health effects. The International Commission on Non-Ionizing Radiation Protection, the International Committee on Electromagnetic Safety and the World Health Organization are assuring that there is no proven health risk and that the present safety limits protect all mobile phone users. However, based on the available scientific evidence, the situation is not as clear. The majority of the evidence comes from in vitro laboratory studies and is of very limited use for determining health risk. Animal toxicology studies are inadequate because it is not possible to "overdose" microwave radiation, as it is done with chemical agents, due to simultaneous induction of heating side-effects. There is a lack of human volunteer studies that would, in unbiased way, demonstrate whether human body responds at all to mobile phone radiation. Finally, the epidemiological evidence is insufficient due to, among others, selection and misclassification bias and the low sensitivity of this approach in detection of health risk within the population. This indicates that the presently available scientific evidence is insufficient to prove reliability of the current safety standards. Therefore, we recommend to use precaution when dealing with mobile phones and, whenever possible and feasible, to limit body exposure to this radiation. Continuation of the research on mobile phone radiation effects is needed in order to improve the basis and the reliability of the safety standards. PMID:20205835

  18. Employers' perceptions and attitudes toward the Canadian national standard on psychological health and safety in the workplace: A qualitative study.

    PubMed

    Kunyk, Diane; Craig-Broadwith, Morgan; Morris, Heather; Diaz, Ruth; Reisdorfer, Emilene; Wang, JianLi

    2016-01-01

    The estimated societal and economic costs of mental illness and psychological injury in the workplace is staggering. Governments, employers and other stakeholders have been searching for policy solutions. This qualitative, exploratory study sought to uncover organizational receptivity to a voluntary comprehensive standard for dealing with psychological health and safety in the workplace. A series of five focus groups were conducted in a large Western Canadian city in November 2013. The seventeen participants were from the fields of healthcare, construction/utilities, manufacturing industries, business services, and finance. They worked in positions of management, consulting, human resources, health promotion, health and safety, mediation, and occupational health and represented organizations ranging in size from 20 to 100,000 employees. The findings confirm and illustrate the critical role that psychological health and safety plays across workplaces and occupations. This standard resonated across the represented organizations and fit with their values. This alignment posed challenges with articulating its added value. There appears to be a need for simplified engagement and implementation strategies of the standard that can be tailored to the nuanced differences between types and sizes of industries. It appears that organizations in the most need of improving psychological health and safety may be the least receptive. Copyright © 2015 Elsevier Ltd. All rights reserved.

  19. 76 FR 11418 - Rear Visibility; Federal Motor Vehicle Safety Standard, Rearview Mirrors; Federal Motor Vehicle...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-02

    ... mirrors to improve the ability of a driver of a vehicle to detect pedestrians in the area immediately..., NHTSA proposed to specify an area immediately behind each vehicle that the driver must be able to see... agency's Federal motor vehicle safety standard on rearview mirrors to improve the ability of a driver to...

  20. 25 CFR 547.14 - What are the minimum technical standards for electronic random number generation?

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... CLASS II GAMES § 547.14 What are the minimum technical standards for electronic random number generation... rules of the game. For example, if a bingo game with 75 objects with numbers or other designations has a... serial correlation (outcomes shall be independent from the previous game); and (x) Test on subsequences...

  1. 25 CFR 547.14 - What are the minimum technical standards for electronic random number generation?

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... CLASS II GAMES § 547.14 What are the minimum technical standards for electronic random number generation... rules of the game. For example, if a bingo game with 75 objects with numbers or other designations has a... serial correlation (outcomes shall be independent from the previous game); and (x) Test on subsequences...

  2. 25 CFR 547.14 - What are the minimum technical standards for electronic random number generation?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... CLASS II GAMES § 547.14 What are the minimum technical standards for electronic random number generation... rules of the game. For example, if a bingo game with 75 objects with numbers or other designations has a... serial correlation (outcomes shall be independent from the previous game); and (x) Test on subsequences...

  3. Dose limits to the lens of the eye: International Basic Safety Standards and related guidance.

    PubMed

    Boal, T J; Pinak, M

    2015-06-01

    The International Atomic Energy Agency (IAEA) safety requirements: 'General Safety Requirements Part 3--Radiation protection and safety of radiation sources: International Basic Safety Standards' (BSS) was approved by the IAEA Board of Governors at its meeting in September 2011, and was issued as General Safety Requirements Part 3 in July 2014. The equivalent dose limit for the lens of the eye for occupational exposure in planned exposure situations was reduced from 150 mSv year(-1) to 20 mSv year(-1), averaged over defined periods of 5 years, with no annual dose in a single year exceeding 50 mSv. This reduction in the dose limit for the lens of the eye followed the recommendation of the International Commission on Radiological Protection in its statement on tissue reactions of 21 April 2011. IAEA has developed guidance on the implications of the new dose limit for the lens of the eye. This paper summarises the process that led to the inclusion of the new dose limit for the lens of the eye in the BSS, and the implications of the new dose limit. © The International Society for Prosthetics and Orthotics Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

  4. Advanced Avalanche Safety Equipment of Backcountry Users: Current Trends and Perceptions.

    PubMed

    Ng, Pearlly; Smith, William R; Wheeler, Albert; McIntosh, Scott E

    2015-09-01

    Backcountry travelers should carry a standard set of safety gear (transceiver, shovel, and probe) to improve rescue chances and reduce mortality risk. Many backcountry enthusiasts are using other advanced equipment such as an artificial air pocket (eg, the AvaLung) or an avalanche air bag. Our goal was to determine the numbers of backcountry users carrying advanced equipment and their perceptions of mortality and morbidity benefit while carrying this gear. A convenience sample of backcountry skiers, snowboarders, snowshoers, and snowmobilers was surveyed between February and April 2014. Participants of this study were backcountry mountain users recruited at trailheads in the Wasatch and Teton mountain ranges of Utah and Wyoming, respectively. Questions included prior avalanche education, equipment carried, and perceived safety benefit derived from advanced equipment. In all, 193 surveys were collected. Skiers and snowboarders were likely to have taken an avalanche safety course, whereas snowshoers and snowmobilers were less likely to have taken a course. Most backcountry users (149, 77.2%), predominantly skiers and snowboarders, carried standard safety equipment. The AvaLung was carried more often (47 users) than an avalanche air bag (10 users). The avalanche air bag had a more favorable perceived safety benefit. A majority of participants reported cost as the barrier to obtaining advanced equipment. Standard avalanche safety practices, including taking an avalanche safety course and carrying standard equipment, remain the most common safety practices among backcountry users in the Wasatch and Tetons. Snowshoers remain an ideal target for outreach to increase avalanche awareness and safety. Copyright © 2015 Wilderness Medical Society. Published by Elsevier Inc. All rights reserved.

  5. Modeling the Relationship between Safety Climate and Safety Performance in a Developing Construction Industry: A Cross-Cultural Validation Study

    PubMed Central

    Zahoor, Hafiz; Chan, Albert P. C.; Utama, Wahyudi P.; Gao, Ran; Zafar, Irfan

    2017-01-01

    This study attempts to validate a safety performance (SP) measurement model in the cross-cultural setting of a developing country. In addition, it highlights the variations in investigating the relationship between safety climate (SC) factors and SP indicators. The data were collected from forty under-construction multi-storey building projects in Pakistan. Based on the results of exploratory factor analysis, a SP measurement model was hypothesized. It was tested and validated by conducting confirmatory factor analysis on calibration and validation sub-samples respectively. The study confirmed the significant positive impact of SC on safety compliance and safety participation, and negative impact on number of self-reported accidents/injuries. However, number of near-misses could not be retained in the final SP model because it attained a lower standardized path coefficient value. Moreover, instead of safety participation, safety compliance established a stronger impact on SP. The study uncovered safety enforcement and promotion as a novel SC factor, whereas safety rules and work practices was identified as the most neglected factor. The study contributed to the body of knowledge by unveiling the deviations in existing dimensions of SC and SP. The refined model is expected to concisely measure the SP in the Pakistani construction industry, however, caution must be exercised while generalizing the study results to other developing countries. PMID:28350366

  6. Modeling the Relationship between Safety Climate and Safety Performance in a Developing Construction Industry: A Cross-Cultural Validation Study.

    PubMed

    Zahoor, Hafiz; Chan, Albert P C; Utama, Wahyudi P; Gao, Ran; Zafar, Irfan

    2017-03-28

    This study attempts to validate a safety performance (SP) measurement model in the cross-cultural setting of a developing country. In addition, it highlights the variations in investigating the relationship between safety climate (SC) factors and SP indicators. The data were collected from forty under-construction multi-storey building projects in Pakistan. Based on the results of exploratory factor analysis, a SP measurement model was hypothesized. It was tested and validated by conducting confirmatory factor analysis on calibration and validation sub-samples respectively. The study confirmed the significant positive impact of SC on safety compliance and safety participation , and negative impact on number of self-reported accidents/injuries . However, number of near-misses could not be retained in the final SP model because it attained a lower standardized path coefficient value. Moreover, instead of safety participation , safety compliance established a stronger impact on SP. The study uncovered safety enforcement and promotion as a novel SC factor, whereas safety rules and work practices was identified as the most neglected factor. The study contributed to the body of knowledge by unveiling the deviations in existing dimensions of SC and SP. The refined model is expected to concisely measure the SP in the Pakistani construction industry, however, caution must be exercised while generalizing the study results to other developing countries.

  7. Disease control and safety of belimumab plus standard therapy over 7 years in patients with systemic lupus erythematosus.

    PubMed

    Ginzler, Ellen M; Wallace, Daniel J; Merrill, Joan T; Furie, Richard A; Stohl, William; Chatham, W Winn; Weinstein, Arthur; McKay, James D; McCune, W Joseph; Zhong, Z John; Freimuth, William W; Petri, Michelle A

    2014-02-01

    To evaluate the efficacy/safety of belimumab plus standard therapy in patients (n = 449) with active systemic lupus erythematosus (SLE) treated up to 7 years (n = 177 currently ongoing). Patients (n = 345) who completed a double-blind, placebo-controlled, 52-week study of belimumab 1, 4, or 10 mg/kg and 24-week extension of belimumab (placebo switched to 10 mg/kg; belimumab same dose or switched to 10 mg/kg) could receive belimumab 10 mg/kg in an open-label continuation study (n = 296). Disease activity was analyzed in patients with active SLE at baseline of the initial study. Biomarker and SLE medication changes were evaluated, and adverse events (AE) were monitored throughout the study. Total belimumab exposure over 7 years (double-blind and open-label periods): 1746 patient-years. SLE Responder Index (SRI) response rates at Week 52 in autoantibody-positive patients: placebo, 29%; belimumab, 46% (p < 0.05). In the continuation study, 57% of auto-antibody-positive patients had an SRI response by Year 2 and 65% by Year 7; severe flares occurred in 19% with placebo and 17% with belimumab during the first year, with the annual rate declining to 2%-9% during years 2-7. Anti-dsDNA autoantibodies in patients positive for them at baseline had a progressive decline of 40%-60% from baseline over 2-7 years with belimumab. Corticosteroid use decreased over time with ≥ 50-55% reduction in median dose during years 5-7. Serious and overall annual AE rates, including infections, were generally stable or decreased during 7-year treatment. Disease control and safety profile were maintained in patients with active SLE taking belimumab plus standard therapy for up to 7 years. [ClinicalTrials.gov numbers: NCT00071487 and NCT00583362].

  8. 78 FR 59066 - Petitions for Modification of Application of Existing Mandatory Safety Standards

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-25

    ... employed at the Rock and Roll Coal Company, as the standard. Docket Number: M-2013-040-C. Petitioner... petitions for modification. II. Petitions for Modification Docket Number: M-2013-039-C. Petitioner: Rock N Roll Coal Company, Inc., P.O. Box 142, Justice, West Virginia 24851. Mines: Mine No. 3, MSHA I.D. No...

  9. 29 CFR 1910.5 - Applicability of standards.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS General § 1910.5 Applicability of standards. (a) Except as provided in... enforce standards or regulations affecting occupational safety or health. (c)(1) If a particular standard...

  10. 29 CFR 1910.5 - Applicability of standards.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS General § 1910.5 Applicability of standards. (a) Except as provided in... enforce standards or regulations affecting occupational safety or health. (c)(1) If a particular standard...

  11. Evaluation of a standardized all-terrain vehicle safety education intervention for youth in rural Central Illinois.

    PubMed

    Novak, Joshua A; Hafner, John W; Aldag, Jean C; Getz, Marjorie A

    2013-01-01

    Although research investigating all-terrain vehicle (ATV) riders and ATV injury patterns has led to support for legislative and educational efforts to decrease injuries in users younger than 16 years, there is little published data regarding the utility of ATV safety education programs. This study investigates the effectiveness of a standardized adolescent ATV safety program in changing the safety knowledge and safe ATV riding practices reported by rural Central Illinois youths. A convenience sample of 260 rural Central Illinois middle and high school students received an ATV safety presentation with both didactic and interactive features during the 2009-2010 school year. Preintervention and postintervention surveys were distributed and collected by teachers. Survey questions consisted of multiple-choice questions pertaining to demographics, ATV safety knowledge, and ATV riding practices. More than 200 surveys were collected prior to the intervention and 165 surveys were collected 12 to 24 weeks after the intervention. Percentages are reported, with differences in nominal variables tested by χ(2) test and interval variables by t test. Following the intervention, there was a significant increase in the correct response rate for ATV safety knowledge questions (45.2% vs 56.2%, P < .001). For adolescents who reported riding ATVs, both safety gear use (11.8% to 21.2%, P = .05) and helmet use (25.4% to 29.0%, P = .56) increased; changes were not significant. Adolescent ATV riders reporting 2 or more accidents showed a slight nonsignificant decrease (25.2% vs 23.4%, P = .77) between the time of the pretest and posttest. This safety program was effective at increasing ATV safety knowledge but demonstrates limited effect on safe riding practices.

  12. An evaluation of the relative safety of U.S. mining explosion-protected equipment approval requirements versus international standards

    PubMed Central

    Calder, W.; Snyder, D.; Burr, J.F.

    2018-01-01

    This paper provides a determination of the equivalent level of protection of the international standards relative to similar criteria used by the U.S. Mine Safety and Health Administration (MSHA) to approve two-fault intrinsically safe (IS) stand-alone equipment. U.S. mining law requires such a determination for MSHA to use alternatives to existing standards. The primary issue is to demonstrate that the international standards for equipment evaluation will provide at least the same level of protection for miners as the document currently used by MSHA. PMID:29780219

  13. 16 CFR 1205.1 - Scope of the standard.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY... subpart A of part 1205 is a consumer product safety standard which prescribes safety requirements for... the standard are subject to the requirements of this standard if they are “consumer products”. “Walk...

  14. 16 CFR 1205.1 - Scope of the standard.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY... subpart A of part 1205 is a consumer product safety standard which prescribes safety requirements for... the standard are subject to the requirements of this standard if they are “consumer products”. “Walk...

  15. 16 CFR 1205.1 - Scope of the standard.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY... subpart A of part 1205 is a consumer product safety standard which prescribes safety requirements for... the standard are subject to the requirements of this standard if they are “consumer products”. “Walk...

  16. 29 CFR 500.102 - Applicability of vehicle safety standards.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... REGULATIONS MIGRANT AND SEASONAL AGRICULTURAL WORKER PROTECTION Motor Vehicle Safety and Insurance for Transportation of Migrant and Seasonal Agricultural Workers, Housing Safety and Health for Migrant Workers Motor... agricultural association to transport any migrant or seasonal agricultural worker shall meet the vehicle safety...

  17. Investigational new drug safety reporting requirements for human drug and biological products and safety reporting requirements for bioavailability and bioequivalence studies in humans. Final rule.

    PubMed

    2010-09-29

    The Food and Drug Administration (FDA) is amending its regulations governing safety reporting requirements for human drug and biological products subject to an investigational new drug application (IND). The final rule codifies the agency's expectations for timely review, evaluation, and submission of relevant and useful safety information and implements internationally harmonized definitions and reporting standards. The revisions will improve the utility of IND safety reports, reduce the number of reports that do not contribute in a meaningful way to the developing safety profile of the drug, expedite FDA's review of critical safety information, better protect human subjects enrolled in clinical trials, subject bioavailability and bioequivalence studies to safety reporting requirements, promote a consistent approach to safety reporting internationally, and enable the agency to better protect and promote public health.

  18. National Dam Safety Program. Brocton Reservoir (Inventory Number NY 785) , Lake Erie Basin, Chautauqua County, New York. Phase I Inspection Report

    DTIC Science & Technology

    1980-09-26

    Inspection Report Brocton Reservoir National Dam Safety Program Lake Erie Basin, Chautauqua County, New York 6. PERFORMING ORG. REPORT NUMBER Inventory No...LAKE ERIE BASIN BROCTON RESERVOIR I ’CHAUTAUQUA COUNTY, NEW YORK I INVENTORY NO. N.Y. 785 PHASE I INSPECTION REPORT NATIONAL DAM SAFETY PROGRAMI. I...Drawings I I I I I I I I I I PHASE I INSPECTION REPORT NATIONAL DAM SAFETY PROGRAIM NAME OF DAM: Brocton Reservoir Inventory No. N.Y. 785 I STATE LOCATED

  19. [Russian and foreign legal-standards bases for guaranteeing the parasitic safety of raw produce and food products].

    PubMed

    Lovgalev, A S

    1998-01-01

    The paper analyzes the standard legal and methodological assurance of the quality and safety of animal food raw materials and foodstuffs (meat, meat products, fish, shellfish, crayfish and their processing products) by the parasitic purity rates according the requirements under the Russian Federation's laws "On Sanitary and Epidemiological Well-Being of the Population", "On Protection of Consumer's Rights", "On Certification of Products and Services", those of SanPiN, such as 2.3.2.560-96 "Sanitary Requirements for the Quality and Safety of Food Raw Materials and Foodstuffs" and 3.2.569-96 "Prevention of Parasitic Diseases in the Russian Federation".

  20. Safety and Liability.

    ERIC Educational Resources Information Center

    Berthelot, Ronald J.; And Others

    1982-01-01

    This series of five articles highlights Pensacola Junior College's occupational safety course, involving simulated emergencies, Florida's standards for teacher liability, electrical safety in the classroom and laboratory, color coding for machine safety, and Florida industrial arts safety instructional materials. (SK)

  1. Hydrogen Safety Issues Compared to Safety Issues with Methane and Propane

    NASA Astrophysics Data System (ADS)

    Green, M. A.

    2006-04-01

    The hydrogen economy is not possible if the safety standards currently applied to liquid hydrogen and hydrogen gas by many laboratories are applied to devices that use either liquid or gaseous hydrogen. Methane and propane are commonly used by ordinary people without the special training. This report asks, "How is hydrogen different from flammable gasses that are commonly being used all over the world?" This report compares the properties of hydrogen, methane and propane and how these properties may relate to safety when they are used in both the liquid and gaseous state. Through such an analysis, sensible safety standards for the large-scale (or even small-scale) use of liquid and gaseous hydrogen systems can be developed. This paper is meant to promote discussion of issues related to hydrogen safety so that engineers designing equipment can factor sensible safety standards into their designs.

  2. The Shock and Vibration Digest. Volume 18, Number 4

    DTIC Science & Technology

    1986-04-01

    determined by this procedure decreases though this equation includes several standard with the square toot of the numbers of records problems, for...earthquake design for nuclear 86-781 power plants in the FRG are recorded in the Vibratos of Nudear Fuel Assemblies: A Simpli- L German nuclear safety...Publications and Printing Pol- icy Committee. SVIC NOTES MANY THANKS"’-’ .e " ., On behalf of the Shock and Vibration Information Center, I wish to

  3. Updated laser safety & hazard analysis for the ARES laser system based on the 2007 ANSI Z136.1 standard.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Augustoni, Arnold L.

    A laser safety and hazard analysis was performed for the temperature stabilized Big Sky Laser Technology (BSLT) laser central to the ARES system based on the 2007 version of the American National Standards Institutes (ANSI) Standard Z136.1, for Safe Use of Lasers and the 2005 version of the ANSI Standard Z136.6, for Safe Use of Lasers Outdoors. The ARES laser system is a Van/Truck based mobile platform, which is used to perform laser interaction experiments and tests at various national test sites.

  4. Comparison of CT numbers of organs before and after plastination using standard S-10 technique.

    PubMed

    Shanthi, Pauline; Singh, Rabi Raja; Gibikote, Sridhar; Rabi, Suganthy

    2015-05-01

    Plastination is the art of preserving biological tissues with curable polymers. Imaging with plastinates offers a unique opportunity for radiographic, anatomical, pathological correlation to elucidate complex anatomical relationships. The aim of this study was to make plastinates from cadavers using the standard S-10 plastination technique and to compare the radiological properties of the tissue before and afterwards to examine the suitability of plastinates as phantoms for planning radiotherapy treatment. An above-diaphragm and a below-diaphragm specimen were obtained from a male and a female cadaver, respectively, and subjected to the standard S-10 plastination technique. CT images were obtained before and after plastination and were compared using Treatment Planning System for anatomical accuracy, volume of organs, and CT numbers. The plastinated specimens obtained were dry, robust, and durable. CT imaging of the plastinated specimens showed better anatomical detail of the organs than the preplastinate. Organ volumes were estimated by contouring the organs' outline in the CT images of the preplastinated and postplastinated specimens, revealing an average shrinkage of 25%. CT numbers were higher in the plastinated specimens except in bones and air-filled cavities such as the maxillary air sinus. Although plastination by the standard S-10 technique preserves anatomical accuracy, it increases the CT numbers of the organs because of the density of silicone, making it unsuitable for radiation dosimetry. Further improvements of the technique could yield more suitable plastinated phantoms. © 2015 Wiley Periodicals, Inc.

  5. 76 FR 69766 - Petitions for Modification of Application of Existing Mandatory Safety Standards

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-09

    ... Opal Court, Suite 315, Hagerstown, Maryland 21740. Mines: Annapolis Mine, MSHA I.D. No. 23-00288, 1... existing standard. Docket Number: M-2011-011-M. Petitioner: ISP Granule Products, LLC, 1101 Opal Court...

  6. Critical features of an auditable management system for an ISO 9000-compatible occupational health and safety standard.

    PubMed

    Levine, S; Dyjack, D T

    1997-04-01

    An International Organization for Standardization (ISO) 9001: 1994-harmonized occupational health and safety (OHS) management system has been written at the University of Michigan, and reviewed, revised, and accepted under the direction of the American Industrial Hygiene Association (AIHA) Occupational Health and Safety Management Systems (OHSMS) Task Force and the Board of Directors. This system is easily adaptable to the ISO 14001 format and to both OHS and environmental management system applications. As was the case with ISO 9001: 1994, this system is expected to be compatible with current production quality and OHS quality systems and standards, have forward compatibility for new applications, and forward flexibility, with new features added as needed. Since ISO 9001: 1987 and 9001: 1994 have been applied worldwide, the incorporation of harmonized OHS and environmental management system components should be acceptable to business units already performing first-party (self-) auditing, and second-party (contract qualification) auditing. This article explains the basis of this OHS management system, its relationship to ISO 9001 and 14001 standards, the philosophy and methodology of an ISO-harmonized system audit, the relationship of these systems to traditional OHS audit systems, and the authors' vision of the future for application of such systems.

  7. Reducing death on the road: the effects of minimum safety standards, publicized crash tests, seat belts, and alcohol.

    PubMed Central

    Robertson, L S

    1996-01-01

    OBJECTIVES. Two phases of attempts to improve passenger car crash worthiness have occurred: minimum safety standards and publicized crash tests. This study evaluated these attempts, as well as changes in seat belt and alcohol use, in terms of their effect on occupant death and fatal crash rates. METHODS. Data on passenger car occupant fatalities and total involvement in fatal crashes, for 1975 through 1991, were obtained from the Fatal Accident Reporting System. Rates per mile were calculated through published sources on vehicle use by vehicle age. Regression estimates of effects of regulation, publicized crash tests, seat belt use and alcohol involvement were obtained. RESULTS. Substantial reductions in fatalities occurred in the vehicle model years from the late 1960s through most of the 1970s, when federal standards were applied. Some additional increments in reduced death rates, attributable to additional improved vehicle crashworthiness, occurred during the period of publicized crash tests. Increased seat belt use and reduced alcohol use also contributed significantly to reduced deaths. CONCLUSIONS. Minimum safety standards, crashworthiness improvements, seat belt use laws, and reduced alcohol use each contributed to a large reduction in passenger car occupant deaths. PMID:8561238

  8. A Criteria Standard for Conflict Resolution: A Vision for Guaranteeing the Safety of Self-Separation in NextGen

    NASA Technical Reports Server (NTRS)

    Munoz, Cesar; Butler, Ricky; Narkawicz, Anthony; Maddalon, Jeffrey; Hagen, George

    2010-01-01

    Distributed approaches for conflict resolution rely on analyzing the behavior of each aircraft to ensure that system-wide safety properties are maintained. This paper presents the criteria method, which increases the quality and efficiency of a safety assurance analysis for distributed air traffic concepts. The criteria standard is shown to provide two key safety properties: safe separation when only one aircraft maneuvers and safe separation when both aircraft maneuver at the same time. This approach is complemented with strong guarantees of correct operation through formal verification. To show that an algorithm is correct, i.e., that it always meets its specified safety property, one must only show that the algorithm satisfies the criteria. Once this is done, then the algorithm inherits the safety properties of the criteria. An important consequence of this approach is that there is no requirement that both aircraft execute the same conflict resolution algorithm. Therefore, the criteria approach allows different avionics manufacturers or even different airlines to use different algorithms, each optimized according to their own proprietary concerns.

  9. Standards of care for students with type 1 diabetes: Ensuring safety, health and inclusion in school.

    PubMed

    Henderson, Genevie

    2005-01-01

    Parents of children with type 1 diabetes commonly worry about the ability of school personnel to respond to their child's diabetes needs, and may feel anxious about the health, safety and inclusion of their child in school. Physicians may be confronted by parents' fears, anxieties and apprehension, and need to know how to make recommendations based on current best practice. The present article describes the school standards from the position paper of the Canadian Diabetes Association titled, "Standards of care for students with type 1 diabetes in school" and a resource booklet available through . Highlights of the school standards provide reference to guide physicians in their advice and support of parents. Physicians can use these resources to enable parents to advocate their child's care and support in the school setting.

  10. Effectiveness of the surgical safety checklist in a high standard care environment.

    PubMed

    Lübbeke, Anne; Hovaguimian, Frederique; Wickboldt, Nadine; Barea, Christophe; Clergue, François; Hoffmeyer, Pierre; Walder, Bernhard

    2013-05-01

    Use of surgical safety checklists has been associated with significant reduction in postoperative surgical site infection (SSI), morbidity, and mortality. To evaluate the effectiveness of an intraoperative checklist in high-risk surgical patients in a high standard care environment with long-standing regular perioperative safety control programs. Quasi-experiment pre-post checklist implementation. Surgical patients above 16 years with an American Society of Anesthesiologists (ASA) score 3-5 operated upon at a large tertiary hospital. Unplanned return to operating room for any reason, reoperation for SSI, unplanned admission to intensive care unit, and in-hospital death within 30 days. A total of 609 patients (53% elective, 85% ASA 3, mean age 70 y) were included before and 1818 after implementation (52% elective, 87% ASA 3, mean age 69 y), the latter with 552, 558, and 708 in period I, II, and III, respectively. Comparing preimplementation to postimplementation periods: unplanned return to operating room occurred in 45/609 (7.4%) versus 109/1818 (6.0%) interventions [adjusted risk ratios (RR) 0.82; 95% confidence interval (CI), 0.59-1.14]; reoperation for SSI in 18/609 (3.0%) versus 109/1818 (1.7%) interventions (adjusted RR 0.56; 95% CI, 0.32-1.00); unplanned admission to intensive care unit in 17 (2.8%) versus 48 (2.6%) interventions (adjusted RR 0.90; 95% CI, 0.52-1.55); and in-hospital death occurred in 26 (4.3%) versus 108 (5.9%) patients (adjusted RR 1.44; 95% CI, 0.97-2.14). Checklist use during 77 interventions prevented 1 reoperation for SSI. A trend toward reduced reoperation rates for SSI was observed after checklist implementation in this high standard care environment; no influence on other outcome measures was observed.

  11. Global Space Safety Regulations and Standards: The Conflicting Perspectives of the 'Merchants', the 'Guardians' and the 'Civilian' Space Agencies

    NASA Astrophysics Data System (ADS)

    Pelton, Joseph N.

    2010-09-01

    This article seek to explore the difference in viewpoint and approach to space safety that is now developing with regard to those that wish to exploit space commercially(i.e. the Merchants) versus those that see space as an extension of national defense and area of strategic interest(i.e. the Guardians), and those that pursue space as an area of civil governmental activity and oversight(i.e. the Civil Space Advocates ).1 These “actors” in the field of space and the key “definers” of space policy in future decades often see the purpose and goals related to outer space activities in fundamentally different ways. They also have quite different views as to how best to regulate and develop space safety standards and practices. With the recent shift in U.S. space policy toward commercial human flight development these issues become of even greater import to the future of space safety development and its regulation. New technological, political, defense and economic opportunities may well likely lead to increasing conflicts over best forms of management practices, appropriate regulations and standards, best ways to finance and implement new space initiatives, and even the best way to establish priorities for new projects and initiatives. This article seeks to analyze in some detail the differences in perspective and approach for all three types of actors in the field of space safety.

  12. Agribusiness Safety. Module SH-15. Safety and Health.

    ERIC Educational Resources Information Center

    Center for Occupational Research and Development, Inc., Waco, TX.

    This student module on agribusiness safety is one of 50 modules concerned with job safety and health. Following the introduction, 11 objectives (each keyed to a page in the text) the student is expected to accomplish are listed (e.g., List at least two reasons for agribusiness safety standards). Then each objective is taught in detail, sometimes…

  13. Safety in the Chemical Laboratory: Developing Departmental Safety Procedures.

    ERIC Educational Resources Information Center

    Renfrew, Malcolm M., Ed.; Palladino, George F.

    1980-01-01

    Presents rationale and guidelines for development of Safety Standard Operating Procedures (Safety SOP) specific for local conditions. Includes an outline of a Safety SOP developed for a department primarily focused on undergraduate education with a wide variety of expertise from common laborer to PhD with 20 years experience. (Author/JN)

  14. Safety risks with investigational drugs: Pharmacy practices and perceptions in the veterans affairs health system.

    PubMed

    Cruz, Jennifer L; Brown, Jamie N

    2015-06-01

    Rigorous practices for safe dispensing of investigational drugs are not standardized. This investigation sought to identify error-prevention processes utilized in the provision of investigational drug services (IDS) and to characterize pharmacists' perceptions about safety risks posed by investigational drugs. An electronic questionnaire was distributed to an audience of IDS pharmacists within the Veteran Affairs Health System. Multiple facets were examined including demographics, perceptions of medication safety, and standard processes used to support investigational drug protocols. Twenty-one respondents (32.8% response rate) from the Northeast, Midwest, South, West, and Non-contiguous United States participated. The mean number of pharmacist full-time equivalents (FTEs) dedicated to the IDS was 0.77 per site with 0.2 technician FTEs. The mean number of active protocols was 22. Seventeen respondents (81%) indicated some level of concern for safety risks. Concerns related to the packaging of medications were expressed, most notably lack of product differentiation, expiration dating, barcodes, and choice of font size or color. Regarding medication safety practices, the majority of sites had specific procedures in place for storing and securing drug supply, temperature monitoring, and prescription labeling. Repackaging bulk items and proactive error-identification strategies were less common. Sixty-seven percent of respondents reported that an independent double check was not routinely performed. Medication safety concerns exist among pharmacists in an investigational drug service; however, a variety of measures have been employed to improve medication safety practices. Best practices for the safe dispensing of investigational medications should be developed in order to standardize these error-prevention strategies.

  15. Safety risks with investigational drugs: Pharmacy practices and perceptions in the veterans affairs health system

    PubMed Central

    Brown, Jamie N.

    2015-01-01

    Objectives: Rigorous practices for safe dispensing of investigational drugs are not standardized. This investigation sought to identify error-prevention processes utilized in the provision of investigational drug services (IDS) and to characterize pharmacists’ perceptions about safety risks posed by investigational drugs. Methods: An electronic questionnaire was distributed to an audience of IDS pharmacists within the Veteran Affairs Health System. Multiple facets were examined including demographics, perceptions of medication safety, and standard processes used to support investigational drug protocols. Results: Twenty-one respondents (32.8% response rate) from the Northeast, Midwest, South, West, and Non-contiguous United States participated. The mean number of pharmacist full-time equivalents (FTEs) dedicated to the IDS was 0.77 per site with 0.2 technician FTEs. The mean number of active protocols was 22. Seventeen respondents (81%) indicated some level of concern for safety risks. Concerns related to the packaging of medications were expressed, most notably lack of product differentiation, expiration dating, barcodes, and choice of font size or color. Regarding medication safety practices, the majority of sites had specific procedures in place for storing and securing drug supply, temperature monitoring, and prescription labeling. Repackaging bulk items and proactive error-identification strategies were less common. Sixty-seven percent of respondents reported that an independent double check was not routinely performed. Conclusions: Medication safety concerns exist among pharmacists in an investigational drug service; however, a variety of measures have been employed to improve medication safety practices. Best practices for the safe dispensing of investigational medications should be developed in order to standardize these error-prevention strategies. PMID:26240744

  16. [Standards and guidelines of radiation protection and safety in dental X-ray examinations].

    PubMed

    Guo, X L; Li, G; Cheng, Y; Yu, Q; Wang, H; Zhang, Z Y

    2017-12-09

    With the rapid development of imaging technology, the application of dental imaging in diagnosis, treatment planning, intraoperative surgical navigation, monitoring of treatment or lesion development and assessment of treatment outcomes is playing an essential role in oral healthcare. The increased total number of dental X-ray examinations is accompanied by a relatively significant increase in collective dose to patients as well as to dental healthcare workers, which is harmful to human bodies to a certain degree. Some radiation protection standards and guidelines in dental radiology have been published in European countries, US, Canada and Australia, etc. Adherence to these standards and guidelines helps to achieve images with diagnostic quality and avoid unnecessary and repeated exposures. However, no radiation protection standard or guideline with regard to dental X-ray examinations has been put in force so far in mainland China. Therefore, a literature review on available radiation protection standards and guidelines was conducted to provide reference to the development of radiation protection standards or guidelines in mainland China.

  17. Development of a Medication Safety and Quality Survey for Small Rural Hospitals.

    PubMed

    Winterstein, Almut G; Johns, Thomas E; Campbell, Kyle N; Libby, Joel; Pannell, Bob

    2017-12-01

    We summarize the development and initial implementation of a survey tool to assess medication safety in small rural hospitals. As part of an ongoing rural hospital medication safety improvement program, we developed a survey tool in all 13 critical access hospitals (CAHs) in Florida. The survey was compiled from existing medication safety assessments and standards, clinical practice guidelines, and published literature. Survey items were selected based on considerations regarding practicality and relevance to the CAH setting.The final survey instrument included 134 items representing 17 medication safety domains. Overall hospital scores ranged from 41% to 95%, with a median of 59%. Most hospitals showed large variation in scores across domains, with 5 hospitals having at least 1 domain with scores less than 10%. Highest scores across all facilities were seen for safety procedures concerning high-alert or look-alike medications and the assembly of emergency carts. The lowest median scores included availability and consistent use of standardized order sets and the effective implementation of medication safety committees. Most hospitals used the survey results to identify and prioritize quality improvement activities. The survey can be used to conduct a short medication safety assessment specific to a limited number of areas and services in CAHs. It showed good ability to discriminate medication safety levels across participating sites and highlighted opportunities for improvement. It may need modification if case mix or services differ in other states or if the status quo of medication safety in CAHs or related standards advance. The described process of survey development might be helpful to support such modifications.

  18. Exposure safety standards for nonionizing radiation (NIR) from collision-avoidance radar

    NASA Astrophysics Data System (ADS)

    Palmer-Fortune, Joyce; Brecher, Aviva; Spencer, Paul; Huguenin, Richard; Woods, Ken

    1997-02-01

    On-vehicle technology for collision avoidance using millimeter wave radar is currently under development and is expected to be in vehicles in coming years. Recently approved radar bands for collision avoidance applications include 47.5 - 47.8 GHz and 76 - 77 GHz. Widespread use of active radiation sources in the public domain would contribute to raised levels of human exposure to high frequency electromagnetic radiation, with potential for adverse health effects. In order to design collision avoidance systems that will pose an acceptably low radiation hazard, it is necessary to determine what levels of electromagnetic radiation at millimeter wave frequencies will be acceptable in the environment. This paper will summarize recent research on NIR (non-ionizing radiation) exposure safety standards for high frequency electromagnetic radiation. We have investigated both governmental and non- governmental professional organizations worldwide.

  19. 75 FR 45591 - Pipeline Safety: Notice of Technical Pipeline Safety Advisory Committee Meetings

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-03

    ... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part... Committee Meetings AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA); DOT. ACTION... safety standards, risk assessments, and safety policies for natural gas pipelines and for hazardous...

  20. An analysis of violations of Osha's (1987) occupational exposure to benzene standard.

    PubMed

    Williams, Pamela R D

    2014-01-01

    The Occupational Safety and Health Administration (OSHA), which was formed by the Occupational Safety and Health Act of 1970 (OSH Act), establishes enforceable health and safety standards in the workplace and issues violations and penalties for non-compliance with these standards. The purpose of the current study was to evaluate the number and type of violations of the OSHA (1987) Occupational Exposure to Benzene Standard. Violations of the OSHA Hazard Communication Standard (HCS), particularly those that may pertain to specific provisions of the benzene standard, were also assessed. All analyses were based on OSHA inspection data that have been collected since the early 1970s and that are publicly available from the U.S. Department of Labor enforcement website. Analysis of these data shows that fewer than a thousand OSHA violations of the benzene standard have been issued over the last 25+ years. The results for benzene are in contrast to those for some other toxic and hazardous substances that are regulated by OSHA, such as blood-borne pathogens, lead, and asbestos, for which there have been issued tens of thousands of OSHA violations. The number of benzene standard violations also varies by time period, standard provision, industry sector, and other factors. In particular, the greatest number of benzene standard violations occurred during the late 1980s to early/mid 1990s, soon after the 1987 final benzene rule was promulgated. The majority of benzene standard violations also pertain to noncompliance with specific provisions and subprovisions of the standard dealing with initial exposure monitoring requirements, the communication of hazards to employees, and medical surveillance programs. Only a small fraction of HCS violations are attributed, at least in part, to potential benzene hazards in the workplace. In addition, most benzene standard violations are associated with specific industries within the manufacturing sector where benzene or benzene

  1. A simple approach to industrial laser safety.

    PubMed

    Lewandowski, Michael A; Hinz, Michael W

    2005-02-01

    Industrial applications of lasers include marking, welding, cutting, and other material processing. Lasers used in these ways have significant power output but are generally designed to limit operator exposure to direct or scattered laser radiation to harmless levels in order to meet the Federal Laser Product Performance Standard (21CFR1040) for Class 1 laser products. Interesting challenges occur when companies integrate high power lasers into manufacturing or process control equipment. A significant part of the integration process is developing engineering and administrative controls to produce an acceptable level of laser safety while balancing production, maintenance, and service requirements. 3M Company uses a large number of high power lasers in numerous manufacturing processes. Whether the laser is purchased as a Class 1 laser product or whether it is purchased as a Class 4 laser and then integrated into a manufacturing application, 3M Company has developed an industrial laser safety program that maintains a high degree of laser safety while facilitating the rapid and economical integration of laser technology into the manufacturing workplace. This laser safety program is based on the requirements and recommendations contained in the American National Standard for Safe Use of Lasers, ANSI Z136.1. The fundamental components of the 3M program include hazard evaluation, engineering, administrative, and procedural controls, protective equipment, signs and labels, training, and re-evaluation upon change. This program is implemented in manufacturing facilities and has resulted in an excellent history of laser safety and an effective and efficient use of laser safety resources.

  2. The beryllium "double standard" standard.

    PubMed

    Egilman, David S; Bagley, Sarah; Biklen, Molly; Golub, Alison Stern; Bohme, Susanna Rankin

    2003-01-01

    Brush Wellman, the world's leading producer and supplier of beryllium products, has systematically hidden cases of beryllium disease that occurred below the threshold limit value (TLV) and lied about the efficacy of the TLV in published papers, lectures, reports to government agencies, and instructional materials prepared for customers and workers. Hypocritically, Brush Wellman instituted a zero exposure standard for corporate executives while workers and customers were told the 2 microgram standard was "safe." Brush intentionally used its workers as "canaries for the plant," and referred to them as such. Internal documents and corporate depositions indicate that these actions were intentional and that the motive was money. Despite knowledge of the inadequacy of the TLV, Brush has successfully used it as a defense against lawsuits brought by injured workers and as a sales device to provide reassurance to customers. Brush's policy has reaped an untold number of victims and resulted in mass distribution of beryllium in consumer products. Such corporate malfeasance is perpetuated by the current market system, which is controlled by an organized oligopoly that creates an incentive for the neglect of worker health and safety in favor of externalizing costs to victimized workers, their families, and society at large.

  3. Wisconsin Driver and Traffic Safety Education: Teacher Preparation Guide. Bulletin Number 7221.

    ERIC Educational Resources Information Center

    Wisconsin Univ., Whitewater.

    This guide identifies the minimum competencies necessary to teach and administer a high school driver and traffic safety education (DTSE) program and provides curricular suggestions for the University of Wisconsin System teacher preparation program. Course descriptions are listed for the following areas: general safety, traffic safety education,…

  4. 77 FR 27086 - Petitions for Modification of Application of Existing Mandatory Safety Standards

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-08

    ... data collectors. Other testing and diagnostic equipment may be used if approved in advance by MSHA's.... (6) Except for time necessary to troubleshoot under actual mining conditions, coal production in the... protection afforded by the existing standard. Docket Number: M-2012-063-C. Petitioner: Sebree Mining, LLC...

  5. OSHA TB standard adds teeth to CDC guidelines. Occupational Safety and Health Administration. Centers for Disease Control and Prevention.

    PubMed

    1997-12-01

    The Occupational Safety and Health Administration (OSHA) has published a proposed standard to provide health care workers with more protection against tuberculosis (TB). With one-quarter of new TB cases occurring in HIV-infected people, 5.3 million workers treating AIDS patients and working with at-risk populations need to be aware of the proposed guidelines. OSHA estimates that the new standard could eliminate most work-related TB infections and save up to $116 million in medical costs and lost production. The OSHA standards vary from those of the Centers for Disease Control (CDC) in several ways. CDC guidelines are voluntary, whereas OSHA standards are enforceable and facilities can be fined for violations. Although OSHA standards have incorporated basic elements of the CDC recommendations, OSHA standards also would require employers to conduct exposure assessments, require six-month skin testing, and call for respirator use in more instances. OSHA officials expect broad participation at public hearings on the new standard, scheduled to begin in February 1998.

  6. Carbon Monoxide Safety

    MedlinePlus

    ... portable generators? Source: National Institute of Standards and Technology More information on carbon monoxide safety Heating fire safety NFPA Educational Messages Desk Reference – these messages provide fire and ...

  7. Private-public sector co-operation to improve pesticide safety standards in developing countries.

    PubMed

    Ellis, W W

    1998-01-01

    This paper draws on the author's experiences of the pilot phase of the Safe Use Project (SUP) in Thailand; this project is a part of a major GIFAP initiative carried out in some developing countries. The SUP's objectives were; i) to raise awareness and compliance in the safe handling and storage of pesticides within the industry, the medical profession and the end-users; ii) to reduce the incidence of pesticide poisoning; iii) to protect the environment; iiii) to help relevant government agencies with resources, expertise and training. To achieve those objectives, the SUP used local-language training resources, provided basic training, lobbied for changes in governmental policies and regulations, and acted as a focal point for pesticide safety-related information. The SUP targeted the whole distribution chain, from importer/formulator, through to the endusers. Also medical profession, teachers and school students were targeted. On the base of independent audit and surveys, a general improvement in awareness has been shown within targeted groups; a longer time frame is required to detect meaningful changes in farmer practice. The SUP key programmes have been: I) training of trainers, retailers and farmers; II) schools programme; III) medical training; IV) protective clothing; V) industry standards; VI) model farm. The main conclusions of the pilot phase were: i) pesticide safety needs to be addressed by all concerned agencies in a joint effort; ii) a rural development perspective must be adopted in improving pesticide safety; iii) integrated pest management training programmes must include precautionary advice for proper handling, use and disposal of pesticides, wherever these are necessary.

  8. 41 CFR 102-76.30 - What seismic safety standards must Federal agencies follow in the design and construction of...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (Continued) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 76-DESIGN AND CONSTRUCTION Design and Construction... 41 Public Contracts and Property Management 3 2013-07-01 2013-07-01 false What seismic safety standards must Federal agencies follow in the design and construction of Federal facilities? 102-76.30...

  9. 41 CFR 102-76.30 - What seismic safety standards must Federal agencies follow in the design and construction of...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... (Continued) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 76-DESIGN AND CONSTRUCTION Design and Construction... 41 Public Contracts and Property Management 3 2011-01-01 2011-01-01 false What seismic safety standards must Federal agencies follow in the design and construction of Federal facilities? 102-76.30...

  10. 41 CFR 102-76.30 - What seismic safety standards must Federal agencies follow in the design and construction of...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... (Continued) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 76-DESIGN AND CONSTRUCTION Design and Construction... 41 Public Contracts and Property Management 3 2014-01-01 2014-01-01 false What seismic safety standards must Federal agencies follow in the design and construction of Federal facilities? 102-76.30...

  11. 41 CFR 102-76.30 - What seismic safety standards must Federal agencies follow in the design and construction of...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... (Continued) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 76-DESIGN AND CONSTRUCTION Design and Construction... 41 Public Contracts and Property Management 3 2012-01-01 2012-01-01 false What seismic safety standards must Federal agencies follow in the design and construction of Federal facilities? 102-76.30...

  12. 41 CFR 102-76.30 - What seismic safety standards must Federal agencies follow in the design and construction of...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (Continued) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 76-DESIGN AND CONSTRUCTION Design and Construction... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What seismic safety standards must Federal agencies follow in the design and construction of Federal facilities? 102-76.30...

  13. 75 FR 17604 - Federal Motor Vehicle Safety Standards; Roof Crush Resistance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-07

    ... Safety Analysis & Forensic Engineering, LLC (SAFE) brought to our attention errors in the preamble that incorrectly attributed to it the comments of another organization, Safety Analysis, Inc. Both of these... Safety Analysis, Inc. SAFE noted that there is no affiliation between SAFE and Safety Analysis, Inc. and...

  14. Facility safety study

    NASA Technical Reports Server (NTRS)

    1979-01-01

    The safety of NASA's in house microelectronics facility is addressed. Industrial health standards, facility emission control requirements, operation and safety checklists, and the disposal of epitaxial vent gas are considered.

  15. Defining attributes of patient safety through a concept analysis.

    PubMed

    Kim, Linda; Lyder, Courtney H; McNeese-Smith, Donna; Leach, Linda Searle; Needleman, Jack

    2015-11-01

    The aim of this study was to report an analysis of the concept of patient safety. Despite recent increase in the number of work being done to clarify the concept and standardize measurement of patient safety, there are still huge variations in how the term is conceptualized and how to measure patient safety data across various healthcare settings and in research. Concept analysis. A literature search was conducted through PubMed and Cumulative Index to Nursing and Allied Health Literature, Plus using the terms 'patient safety' in the title and 'concept analysis,' 'attributes' or 'definition' in the title and or abstract. All English language literature published between 2002-2014 were considered for the review. Walker and Avant's method guided this analysis. The defining attributes of patient safety include prevention of medical errors and avoidable adverse events, protection of patients from harm or injury and collaborative efforts by individual healthcare providers and a strong, well-integrated healthcare system. The application of Collaborative Alliance of Nursing Outcomes indicators as empirical referents would facilitate the measurement of patient safety. With the knowledge gained from this analysis, nurses may improve patient surveillance efforts that identify potential hazards before they become adverse events and have a stronger voice in health policy decision-making that influence implementation efforts aimed at promoting patient safety, worldwide. Further studies are needed on development of a conceptual model and framework that can aid with collection and measurement of standardized patient safety data. © 2015 John Wiley & Sons Ltd.

  16. Advancing perinatal patient safety through application of safety science principles using health IT.

    PubMed

    Webb, Jennifer; Sorensen, Asta; Sommerness, Samantha; Lasater, Beth; Mistry, Kamila; Kahwati, Leila

    2017-12-19

    The use of health information technology (IT) has been shown to promote patient safety in Labor and Delivery (L&D) units. The use of health IT to apply safety science principles (e.g., standardization) to L&D unit processes may further advance perinatal safety. Semi-structured interviews were conducted with L&D units participating in the Agency for Healthcare Research and Quality's (AHRQ's) Safety Program for Perinatal Care (SPPC) to assess units' experience with program implementation. Analysis of interview transcripts was used to characterize the process and experience of using health IT for applying safety science principles to L&D unit processes. Forty-six L&D units from 10 states completed participation in SPPC program implementation; thirty-two (70%) reported the use of health IT as an enabling strategy for their local implementation. Health IT was used to improve standardization of processes, use of independent checks, and to facilitate learning from defects. L&D units standardized care processes through use of electronic health record (EHR)-based order sets and use of smart pumps and other technology to improve medication safety. Units also standardized EHR documentation, particularly related to electronic fetal monitoring (EFM) and shoulder dystocia. Cognitive aids and tools were integrated into EHR and care workflows to create independent checks such as checklists, risk assessments, and communication handoff tools. Units also used data from EHRs to monitor processes of care to learn from defects. Units experienced several challenges incorporating health IT, including obtaining organization approval, working with their busy IT departments, and retrieving standardized data from health IT systems. Use of health IT played an integral part in the planning and implementation of SPPC for participating L&D units. Use of health IT is an encouraging approach for incorporating safety science principles into care to improve perinatal safety and should be incorporated

  17. 29 CFR 1910.18 - Changes in established Federal standards.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 1910.18 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Adoption and Extension of Established Federal Standards § 1910.18 Changes in established Federal standards. Whenever an occupational safety and health...

  18. 29 CFR 1910.18 - Changes in established Federal standards.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 1910.18 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Adoption and Extension of Established Federal Standards § 1910.18 Changes in established Federal standards. Whenever an occupational safety and health...

  19. Establishing powder-handling workflow practices and standard operating procedures: compounding pharmacy and safety.

    PubMed

    Prince, Bryan; Lundevall, Jeremy

    2014-01-01

    This is an ongoing discussion and analysis of powder-handling safety in the compounding pharmacy laboratory that started in the November/December 2013 issue of the International Journal of Pharmaceutical Compounding. In the previous technical article, we established that most chemical powders handled during compounding procedures have an established occupational exposure limits and that powders are micronized during manipulation. All micronized powders handled on an open bench create health hazards to the technicians and create a potential for cross-contamination to the lab environment. Proper identification of the chemical hazard and established standard operating procedures in direct correlation to Good Lab Practices when working inside a powder hood will positively improve the compounding pharmacy's work environment.

  20. Impact resistance of materials for guards on cutting machine tools--requirements in future European safety standards.

    PubMed

    Mewes, D; Trapp, R P

    2000-01-01

    Guards on machine tools are meant to protect operators from injuries caused by tools, workpieces, and fragments hurled out of the machine's working zone. This article presents the impact resistance requirements, which guards according to European safety standards for machine tools must satisfy. Based upon these standards the impact resistance of different guard materials was determined using cylindrical steel projectiles. Polycarbonate proves to be a suitable material for vision panels because of its high energy absorption capacity. The impact resistance of 8-mm thick polycarbonate is roughly equal to that of a 3-mm thick steel sheet Fe P01. The limited ageing stability, however, makes it necessary to protect polycarbonate against cooling lubricants by means of additional panes on both sides.

  1. 16 CFR 1203.53 - Interim safety standards.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ..., Protective Headgear for Bicyclists, (2) ASTM standards F 1447-93 or F 1447-94, Standard Specification for Protective Headgear Used in Bicycling, incorporating the relevant provisions of ASTM F 1446-93 or ASTM F 1446... Institute, 11 W. 42nd Street, 13th Floor, New York, NY 10036. Copies of the ASTM standards are available...

  2. Standard versus atrial fibrillation-specific management strategy (SAFETY) to reduce recurrent admission and prolong survival: pragmatic, multicentre, randomised controlled trial.

    PubMed

    Stewart, Simon; Ball, Jocasta; Horowitz, John D; Marwick, Thomas H; Mahadevan, Gnanadevan; Wong, Chiew; Abhayaratna, Walter P; Chan, Yih K; Esterman, Adrian; Thompson, David R; Scuffham, Paul A; Carrington, Melinda J

    2015-02-28

    Patients are increasingly being admitted with chronic atrial fibrillation, and disease-specific management might reduce recurrent admissions and prolong survival. However, evidence is scant to support the application of this therapeutic approach. We aimed to assess SAFETY--a management strategy that is specific to atrial fibrillation. We did a pragmatic, multicentre, randomised controlled trial in patients admitted with chronic, non-valvular atrial fibrillation (but not heart failure). Patients were recruited from three tertiary referral hospitals in Australia. 335 participants were randomly assigned by computer-generated schedule (stratified for rhythm or rate control) to either standard management (n=167) or the SAFETY intervention (n=168). Standard management consisted of routine primary care and hospital outpatient follow-up. The SAFETY intervention comprised a home visit and Holter monitoring 7-14 days after discharge by a cardiac nurse with prolonged follow-up and multidisciplinary support as needed. Clinical reviews were undertaken at 12 and 24 months (minimum follow-up). Coprimary outcomes were death or unplanned readmission (both all-cause), measured as event-free survival and the proportion of actual versus maximum days alive and out of hospital. Analyses were done on an intention-to-treat basis. The trial is registered with the Australian New Zealand Clinical Trials Registry (ANZCTRN 12610000221055). During median follow-up of 905 days (IQR 773-1050), 49 people died and 987 unplanned admissions were recorded (totalling 5530 days in hospital). 127 (76%) patients assigned to the SAFETY intervention died or had an unplanned readmission (median event-free survival 183 days [IQR 116-409]) and 137 (82%) people allocated standard management achieved a coprimary outcome (199 days [116-249]; hazard ratio 0·97, 95% CI 0·76-1·23; p=0·851). Patients assigned to the SAFETY intervention had 99·5% maximum event-free days (95% CI 99·3-99·7), equating to a median

  3. Review of Federal Motor Vehicle Safety Standards (FMVSS) for Automated Vehicles : Identifying Potential Barriers and Challenges for the Certification of Automated Vehicles Using Existing FMVSS

    DOT National Transportation Integrated Search

    2016-03-11

    The purpose of this work is to identify instances where the existing Federal Motor Vehicle Safety Standards may pose challenges to the introduction of automated vehicles. It identifies standards requiring further review - both to ensure that existing...

  4. Safety in Outdoor Adventure Programs. S.O.A.P. Safety Policy.

    ERIC Educational Resources Information Center

    MacDonald, Wayne, Comp.; And Others

    Drafted in 1978 as a working document for Safety in Outdoor Adventure Programs (S.O.A.P.) by a council of outdoor adventure programmers, checklists outline standard accepted safety policy for Outdoor Adventure Programs and Wilderness Adventure Programs conducted through public or private agencies in California. Safety policy emphasizes: the…

  5. Effect of the New York State cigarette fire safety standard on ignition propensity, smoke constituents, and the consumer market.

    PubMed

    Connolly, G N; Alpert, H R; Rees, V; Carpenter, C; Wayne, G F; Vallone, D; Koh, H

    2005-10-01

    This study examines empirical evidence from the New York experience testing tobacco industry arguments made in opposition to fire safety standards for cigarettes. Percentages of cigarettes exhibiting full length burns (FLBs), cigarette sales before and following the implementation of the New York standards, a sample of retail cigarette prices, brand availability, and selected smoke constituent yields were compared between cigarettes sold in New York and two other states. Cigarette paper analysis was conducted on cigarettes sold in New York. New York cigarette brands averaged 10.0% FLBs as compared to 99.8% for California and Massachusetts brands. Reduced ignition propensity (RIP) appears to have been achieved by cigarette paper banding. Cigarette sales, prices, and brand availability do not appear to have been affected by the New York standards. Yields of the majority of smoke constituents tested did not differ substantially between RIP cigarettes sold in New York as compared to the same brands sold in Massachusetts. Average yields of tar, carbon monoxide, and two compounds were slightly higher, the yields of seven compounds were higher for one brand only, and nicotine was lower, among New York brands tested. RIP cigarette brands have been designed to meet the New York fire safety standards. Their introduction has not affected cigarette sales or prices in New York. There is no evidence that the small increases in smoke constituent yields affect the already highly toxic nature of cigarette smoke. Data on smoking caused fires, deaths, and injuries dating from after the change in law are not yet available. Such data will be able to address the question of whether the demonstrated reduced ignition standards are associated with reduced fires and injuries. Based on the New York experience, prior industry objections to producing RIP cigarettes are unfounded. Other states and nations should adopt similar standards.

  6. School Bus Safety.

    ERIC Educational Resources Information Center

    Stroup, Karen Bruner; And Others

    1991-01-01

    Equipment to allow safe transportation of disabled children is reviewed. Such equipment includes infant car seats, child safety seats, safety vests, and accommodations for children in casts and/or braces. Five principles for evaluation and selection of safe seating options are given as are safety rules and information on standards and resources.…

  7. [Objectives and limits of test standards].

    PubMed

    Kaddick, C; Blömer, W

    2014-06-01

    Test standards are developed worldwide by extremely committed expert groups working mostly in an honorary capacity and have substantially contributed to the currently achieved safety standards in reconstructive orthopedics. Independent of the distribution and quality of a test specification, the specialist knowledge of the user cannot replace a well founded risk analysis and if used unthinkingly can lead to a false estimation of safety. The limits of standardization are reached where new indications or highly innovative products are concerned. In this case the manufacturer must undertake the time and cost-intensive route of a self-developed testing procedure which in the ideal case leads to a further testing standard. Test standards make a substantial contribution to implant safety but cannot replace the expert knowledge of the user. Tests as an end to themselves take the actual objectives of standardization to absurdity.

  8. 29 CFR 500.132 - Applicable Federal standards: ETA and OSHA housing standards.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... promulgated by the Occupational Safety and Health Administration, at 29 CFR 1910.142. Except as provided in... Migrant Workers Housing Safety and Health § 500.132 Applicable Federal standards: ETA and OSHA housing... Occupational Safety and Health Act. (2) A person who owns or controls a facility or real property to be used...

  9. 29 CFR 500.132 - Applicable Federal standards: ETA and OSHA housing standards.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... promulgated by the Occupational Safety and Health Administration, at 29 CFR 1910.142. Except as provided in... Migrant Workers Housing Safety and Health § 500.132 Applicable Federal standards: ETA and OSHA housing... Occupational Safety and Health Act. (2) A person who owns or controls a facility or real property to be used...

  10. Hydrogen Safety Issues Compared to Safety Issues with Methane andPropane

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Green, Michael A.

    The hydrogen economy is not possible if the safety standards currently applied to liquid hydrogen and hydrogen gas by many laboratories are applied to devices that use either liquid or gaseous hydrogen. Methane and propane are commonly used by ordinary people without the special training. This report asks, 'How is hydrogen different from flammable gasses that are commonly being used all over the world?' This report compares the properties of hydrogen, methane and propane and how these properties may relate to safety when they are used in both the liquid and gaseous state. Through such an analysis, sensible safety standardsmore » for the large-scale (or even small-scale) use of liquid and gaseous hydrogen systems can be developed. This paper is meant to promote discussion of issues related to hydrogen safety so that engineers designing equipment can factor sensible safety standards into their designs.« less

  11. Immunotherapy safety: a prospective multi-centric monitoring study of biologically standardized therapeutic vaccines for allergic diseases.

    PubMed

    Moreno, C; Cuesta-Herranz, J; Fernández-Távora, L; Alvarez-Cuesta, E

    2004-04-01

    The fear of side-effects has led to strict regulations preventing a more widespread use of specific immunotherapy (SIT) in some countries, in spite of the low risk of systemic reactions (SRs) reported in well-controlled studies. The goal of the study was to carry out a prospective and multi-centric trial to evaluate the safety, risk factors and compliance degree of commercially available SIT. The study was carried out in 14 allergy departments from Spain. Four-hundred and eighty-eight patients with rhinitis and/or asthma were submitted to treatment with biologically standardized allergen extracts commercially available. They were administered following the European Academy of Allergy and Clinical Immunology guidelines. Four hundred and twenty-three patients (86.7%) completed the treatment and remained under control at the end of the trial. Out of 17,526 administered doses, 17,368 doses (99.1%) were not associated with a reaction. Eighteen patients (3.7%) experienced 53 (0.3% of the doses) SRs. All immediate SRs were mild or moderate and responded well to ordinary treatment measures. There were no fatal reactions, anaphylactic shock or life-threatening reactions. A higher ratio of SRs was found among asthmatic and dust mite allergic patients, although multi-variable logistic analysis did not demonstrate any risk factor associated with SRs. There was also a subgroup of patients at risk for recurrent reactions, and therefore 40% of SRs had been avoided if the maximal number of SRs had been previously limited to only three SRs. This multi-centric study showed that SIT was a safe treatment with a very good compliance. Future guidelines of SIT should limit the maximal number of SRs.

  12. The Relationship between Using Electronic Health Records and Meeting Accreditation Standards for Client Safety in Residential Aged Care Homes.

    PubMed

    Jiang, Tao; Yu, Ping

    2015-01-01

    This study aims to identify the benefits of using electronic health records (EHR) for client safety in residential aged care (RAC) homes. The aged care accreditation reports published between 27 April 2011 and 3 December 2013 were downloaded and analysed. It could be seen from these reports that only 1,031(37.45%) RAC homes in Australia had adopted an EHR system by 2013. 13 RAC homes failed one or more accreditation standards. Only one of these was using an EHR system and this one met the accreditation standards on information systems. Our study provides empirical evidence to suggest that adopting and using EHR can be one of the effective organisational mechanisms to meeting accreditation standards in RAC homes.

  13. The science behind codes and standards for safe walkways: changes in level, stairways, stair handrails and slip resistance.

    PubMed

    Nemire, Kenneth; Johnson, Daniel A; Vidal, Keith

    2016-01-01

    Walkway codes and standards are often created through consensus by committees based on a number of factors, including historical precedence, common practice, cost, and empirical data. The authors maintain that in the formulation of codes and standards that impact pedestrian safety, the results of pertinent scientific research should be given significant weight. This article examines many elements of common walkway codes and standards related to changes in level, stairways, stair handrails, and slip resistance. It identifies which portions are based on or supported by empirical data; and which could benefit from additional scientific research. This article identifies areas in which additional research, codes, and standards may be beneficial to enhance pedestrian safety. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  14. Are health professionals' perceptions of patient safety related to figures on safety incidents?

    PubMed

    Martijn, Lucie; Harmsen, Mirjam; Gaal, Sander; Mettes, Dirk; van Dulmen, Simone; Wensing, Michel

    2013-10-01

    The study aims to explore whether health care professionals' perceptions of patient safety in their practice were associated with the number of patient safety incidents identified in patient records. Seventy primary care practices of general practice, general dental practice, midwifery practices and allied health care practices were used in the study. A retrospective audit of 50 patient records was performed to identify patient safety incidents in each of the practices and a survey among health professionals to identify their perceptions of patient safety. All health professions felt that 'communication breakdowns inside the practice' as well as 'communication breakdowns outside the practice' and 'reporting of patient safety concerns' were a threat to patient safety in their work setting. We found little association between the perceptions of health professionals and the number of safety incidents. The only item with a significant relation to a higher number of safety incidents referred to the perception of 'communication problems outside the practice' as a threat to patient safety. This study indicates that the assessment of professionals' perceptions may be complementary to observed safety incidents, but not linked to an objective measure of patient safety. © 2012 John Wiley & Sons Ltd.

  15. Assessment of Offshore Wind System Design, Safety, and Operation Standards

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sirnivas, Senu; Musial, Walt; Bailey, Bruce

    This report is a deliverable for a project sponsored by the U.S. Department of Energy (DOE) entitled National Offshore Wind Energy Resource and Design Data Campaign -- Analysis and Collaboration (contract number DE-EE0005372; prime contractor -- AWS Truepower). The project objective is to supplement, facilitate, and enhance ongoing multiagency efforts to develop an integrated national offshore wind energy data network. The results of this initiative are intended to 1) produce a comprehensive definition of relevant met-ocean resource assets and needs and design standards, and 2) provide a basis for recommendations for meeting offshore wind energy industry data and design certificationmore » requirements.« less

  16. Nuclear safety, Volume 38, Number 1, January--March 1997

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    1997-03-01

    This journal contains nine articles which fall under the following categories: (1) general safety considerations; (2) control and instrumentation; (3) design features (4) environmental effects; (5) US Nuclear Regulatory Commission information and analyses; and (6) recent developments.

  17. Spacecraft Fire Safety

    NASA Technical Reports Server (NTRS)

    Margle, Janice M. (Editor)

    1987-01-01

    Fire detection, fire standards and testing, fire extinguishment, inerting and atmospheres, fire-related medical science, aircraft fire safety, Space Station safety concerns, microgravity combustion, spacecraft material flammability testing, and metal combustion are among the topics considered.

  18. 78 FR 35559 - Updating OSHA Standards Based on National Consensus Standards; Signage

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-13

    ...; Signage AGENCY: Occupational Safety and Health Administration (OSHA), Department of Labor. ACTION: Direct... signage standards by adding references to the latest versions of the American National Standards Institute... earlier ANSI standards, ANSI Z53.1-1967, Z35.1-1968 and Z35.2-1968, in its signage standards, thereby...

  19. Standards--the common element in providing the safety, quality and performance of the medical practice.

    PubMed

    Greabu, Maria

    2009-01-01

    Knowing and applying standards is an opportunity of the years 2007-2008 in any kind of field where a successful activity is intended and this assures a certain way towards competence and quality. The most recent German studies highlighted, to the surprise of the specialists, that standardization holds the second place, after the material means, in the row of the elements considered to be decisive for the success of a business. The existence of standards and the concern for their implementation in the activity provides a high technical and quality level of the products/services offered to the clients and the increase in the level of competence of the personnel, who will be able to cope with all the challenges. This need comes from the process of Romania's accession to the European Union. There are a lot of reasons why standards represent a fundamental part of our daily life. Practically, we are surrounded by standards. Everything is "working" well and it is efficient if the standards used as a base for manufacturing "things" have been correctly developed and applied. Standards open communication channels and commercial channels, promote the understanding of technical products, the compatibility of products and services, facilitate mass production and, most importantly, they are the necessary base for the achievement of the objectives in the fields of health and safety and a better quality of life. The transition towards the global market needs an instrument for the removal of the barriers to the application of the latest discoveries in the field of medical instruments, materials and manual labor. Each medical device, equipment and material used in the Dental and General Medicine is standardized, in fact that leads to their better knowing and provides controllable treatment for manual labor with predictable and repeatable results. This presentation intends to make a survey of some general aspects on standardization as well as a review of the standards in the medical

  20. The European space debris safety and mitigation standard

    NASA Astrophysics Data System (ADS)

    Alby, F.; Alwes, D.; Anselmo, L.; Baccini, H.; Bonnal, C.; Crowther, R.; Flury, W.; Jehn, R.; Klinkrad, H.; Portelli, C.; Tremayne-Smith, R.

    2001-10-01

    A standard has been proposed as one of the series of ECSS Standards intended to be applied together for the management, engineering and product assurance in space projects and applications. The requirements in the Standard are defined in terms of what must be accomplished, rather than in terms of how to organise and perform the necessary work. This allows existing organisational structures and methods within agencies and industry to be applied where they are effective, and for such structures and methods to evolve as necessary, without the need for rewriting the standards. The Standard comprises management requirements, design requirements and operational requirements. The standard was prepared by the European Debris Mitigation Standard Working Group (EDMSWG) involving members from ASI, BNSC, CNES, DLR and ESA.

  1. Ad hoc versus standardized admixtures for continuous infusion drugs in neonatal intensive care: cognitive task analysis of safety at the bedside.

    PubMed

    Brannon, Timothy S

    2006-01-01

    Continuous infusion intravenous (IV) drugs in neonatal intensive care are usually prepared based on patient weight so that the dose is readable as a simple multiple of the infusion pump rate. New safety guidelines propose that hospitals switch to using standardized admixtures of these drugs to prevent calculation errors during ad hoc preparation. Extended hierarchical task analysis suggests that switching to standardized admixtures may lead to more errors in programming the pump at the bedside.

  2. Surveying wearable human assistive technology for life and safety critical applications: standards, challenges and opportunities.

    PubMed

    Alam, Muhammad Mahtab; Ben Hamida, Elyes

    2014-05-23

    In this survey a new application paradigm life and safety for critical operations and missions using wearable Wireless Body Area Networks (WBANs) technology is introduced. This paradigm has a vast scope of applications, including disaster management, worker safety in harsh environments such as roadside and building workers, mobile health monitoring, ambient assisted living and many more. It is often the case that during the critical operations and the target conditions, the existing infrastructure is either absent, damaged or overcrowded. In this context, it is envisioned that WBANs will enable the quick deployment of ad-hoc/on-the-fly communication networks to help save many lives and ensuring people's safety. However, to understand the applications more deeply and their specific characteristics and requirements, this survey presents a comprehensive study on the applications scenarios, their context and specific requirements. It explores details of the key enabling standards, existing state-of-the-art research studies, and projects to understand their limitations before realizing aforementioned applications. Application-specific challenges and issues are discussed comprehensively from various perspectives and future research and development directions are highlighted as an inspiration for new innovative solutions. To conclude, this survey opens up a good opportunity for companies and research centers to investigate old but still new problems, in the realm of wearable technologies, which are increasingly evolving and getting more and more attention recently.

  3. Surveying Wearable Human Assistive Technology for Life and Safety Critical Applications: Standards, Challenges and Opportunities

    PubMed Central

    Alam, Muhammad Mahtab; Ben Hamida, Elyes

    2014-01-01

    In this survey a new application paradigm life and safety for critical operations and missions using wearable Wireless Body Area Networks (WBANs) technology is introduced. This paradigm has a vast scope of applications, including disaster management, worker safety in harsh environments such as roadside and building workers, mobile health monitoring, ambient assisted living and many more. It is often the case that during the critical operations and the target conditions, the existing infrastructure is either absent, damaged or overcrowded. In this context, it is envisioned that WBANs will enable the quick deployment of ad-hoc/on-the-fly communication networks to help save many lives and ensuring people's safety. However, to understand the applications more deeply and their specific characteristics and requirements, this survey presents a comprehensive study on the applications scenarios, their context and specific requirements. It explores details of the key enabling standards, existing state-of-the-art research studies, and projects to understand their limitations before realizing aforementioned applications. Application-specific challenges and issues are discussed comprehensively from various perspectives and future research and development directions are highlighted as an inspiration for new innovative solutions. To conclude, this survey opens up a good opportunity for companies and research centers to investigate old but still new problems, in the realm of wearable technologies, which are increasingly evolving and getting more and more attention recently. PMID:24859024

  4. Electric fence standards comport with human data and AC limits.

    PubMed

    Kroll, Mark W; Perkins, Peter E; Panescu, Dorin

    2015-08-01

    The ubiquitous electric fence is essential to modern agriculture and has saved lives by reducing the number of livestock automobile collisions. Modern safety standards such as IEC 60335-2-76 and UL 69 have played a role in this positive result. However, these standards are essentially based on energy and power (RMS current), which have limited direct relationship to cardiac effects. We compared these standards to bioelectrically more relevant units of charge and average current in view of recent work on VF (ventricular fibrillation) induction and to existing IEC AC current limits. There are 3 limits for normal (low) pulsing rate: IEC energy limit, IEC current limit, and UL current limit. We then calculated the delivered charge allowed for each pulse duration for these limits and then compared them to a charge-based safety model derived from published human ventricular-fibrillation induction data. Both the IEC and UL also allow for rapid pulsing for up to 3 minutes. We calculated maximum outputs for various pulse durations assuming pulsing at 10, 20, and 30 pulses per second. These were then compared to standard utility power safety (AC) limits via the conversion factor of 7.4 to convert average current to RMS current for VF risk. The outputs of TASER electrical weapons (typically < 100 μC and ~100 μs duration) were also compared. The IEC and UL electric fence energizer normal rate standards are conservative in comparison with actual human laboratory experiments. The IEC and UL electric fence energizer rapid-pulsing standards are consistent with accepted IEC AC current limits for commercially used pulse durations.

  5. Safety Criticality Standards Using the French CRISTAL Code Package: Application to the AREVA NP UO{sub 2} Fuel Fabrication Plant

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Doucet, M.; Durant Terrasson, L.; Mouton, J.

    2006-07-01

    Criticality safety evaluations implement requirements to proof of sufficient sub critical margins outside of the reactor environment for example in fuel fabrication plants. Basic criticality data (i.e., criticality standards) are used in the determination of sub critical margins for all processes involving plutonium or enriched uranium. There are several criticality international standards, e.g., ARH-600, which is one the US nuclear industry relies on. The French Nuclear Safety Authority (DGSNR and its advising body IRSN) has requested AREVA NP to review the criticality standards used for the evaluation of its Low Enriched Uranium fuel fabrication plants with CRISTAL V0, the recentlymore » updated French criticality evaluation package. Criticality safety is a concern for every phase of the fabrication process including UF{sub 6} cylinder storage, UF{sub 6}-UO{sub 2} conversion, powder storage, pelletizing, rod loading, assembly fabrication, and assembly transportation. Until 2003, the accepted criticality standards were based on the French CEA work performed in the late seventies with the APOLLO1 cell/assembly computer code. APOLLO1 is a spectral code, used for evaluating the basic characteristics of fuel assemblies for reactor physics applications, which has been enhanced to perform criticality safety calculations. Throughout the years, CRISTAL, starting with APOLLO1 and MORET 3 (a 3D Monte Carlo code), has been improved to account for the growth of its qualification database and for increasing user requirements. Today, CRISTAL V0 is an up-to-date computational tool incorporating a modern basic microscopic cross section set based on JEF2.2 and the comprehensive APOLLO2 and MORET 4 codes. APOLLO2 is well suited for criticality standards calculations as it includes a sophisticated self shielding approach, a P{sub ij} flux determination, and a 1D transport (S{sub n}) process. CRISTAL V0 is the result of more than five years of development work focusing on

  6. Evaluation of Patient Safety Indicators in Semnan City Hospitals by Using the Patient Safety Friendly Hospital Initiative (PSFHI).

    PubMed

    Babamohamadi, Hassan; Nemati, Roghayeh Khabiri; Nobahar, Monir; Keighobady, Seifullah; Ghazavi, Soheila; Izadi-Sabet, Farideh; Najafpour, Zhila

    2016-08-01

    Nowadays, patient safety issue is among one of the main concerns of the hospital policy worldwide. This study aimed to evaluate the patient safety status in hospitals affiliated to Semnan city, using the WHO model for Patient Safety Friendly Hospital Initiatives (PSFHI) in summer 2014. That was a cross sectional descriptive study that addressed patient safety , which explained the current status of safety in the Semnan hospitals using by instrument of Patient safety friendly initiative standards (PSFHI). Data was collected from 5 hospitals in Semnan city during four weeks in May 2014. The finding of 5 areas examined showed that some components in critical standards had disadvantages. Critical standards of hospitals including areas of leadership and administration, patient and public involvement and safe evidence-based clinical practice, safe environment with and lifetime education in a safe and secure environment were analyzed. The domain of patient and public involvement obtained the lowest mean score and the domain of safe environment obtained the highest mean score in the surveyed hospitals. All the surveyed hospitals had a poor condition regarding standards based on patient safety. Further, the identified weak points are almost the same in the hospitals. Therefore, In order to achieve a good level of all aspects of the protocol, the goals should be considered in the level of strategic planning at hospitals. An effective execution of patient safety creatively may depend on the legal infrastructure and enforcement of standards by hospital management, organizational liability to expectation of patients, safety culture in hospitals.

  7. 49 CFR 229.99 - Safety hangers.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Safety hangers. 229.99 Section 229.99..., DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Safety Requirements Internal Combustion Equipment § 229.99 Safety hangers. Drive shafts shall have safety hangers. ...

  8. 49 CFR 229.99 - Safety hangers.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Safety hangers. 229.99 Section 229.99..., DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Safety Requirements Internal Combustion Equipment § 229.99 Safety hangers. Drive shafts shall have safety hangers. ...

  9. Ensuring quality and safety.

    PubMed

    Reid, Jerry

    2010-01-01

    The certification model addresses quality and safety by directly targeting the qualifications of individuals. The practice accreditation model takes a more global approach to quality and safety and addresses the qualifications of individuals and standards for additional components of the quality chain. Although both certification and practice accreditation fundamentally are voluntary, the programs may become mandatory when enforcement mechanisms are linked to the programs via state or federal legislation or via private reimbursement policies, effectively resulting in mandatory standards. The CARE bill takes a certification approach to quality and safety by focusing on the qualifications of the individual. MIPPA takes an accreditation approach by focusing on the practice. MQSA is somewhat of a hybrid in that it takes an accreditation approach, but spells out standards for the individual that the accreditor must follow. If the practice accreditation standards require that all technologists employed in the practice be certified in the modalities performed, then the practice accreditation model and the certification model become functionally equivalent in terms of personnel qualifications. To the extent that practice accreditation models are less prescriptive regarding personnel standards, the certification model results in more stringent standards.

  10. Application status and its affecting factors of double standard for multinational corporations in Korea.

    PubMed

    Ki, Myung; Choi, Jaewook; Lee, Juneyoung; Park, Heechan; Yoon, Seokjoon; Kim, Namhoon; Heo, Jungyeon

    2004-02-01

    We intended to evaluate the double standard status and to identify factors of determining double standard criteria in multinational corporations of Korea, and specifically those in the occupational health and safety area. A postal questionnaire had been sent, between August 2002 and September 2002, to multinational corporations in Korea. A double standard company was defined as those who answered in more than one item as adopting a different standard among the five items regarding double standard identification. By comparing double standard companies with equivalent standard companies, determinants for double standards were then identified using logistic regression analysis. Of multinational corporations, 45.1% had adopted a double standard. Based on the question naire's scale level, the factor of 'characteristic and size of multinational corporation' was found to have the most potent impact on increasing double standard risk. On the variable level, factors of 'number of affiliated companies' and 'existence of an auditing system with the parent company' showed a strong negative impact on double standard risk. Our study suggests that a distinctive approach is needed to manage the occupational safety and health for multinational corporations. This approach should be focused on the specific level of a corporation, not on a country level.

  11. Industry Initiated Core Safety Attributes for Human Spaceflight for the 7th IAASS Conference

    NASA Technical Reports Server (NTRS)

    Mango, Edward J.

    2014-01-01

    Now that the NASA Commercial Crew Program (CCP) is beginning its full certification contract for crew transportation to the International Space Station (ISS), is it time for industry to embrace a minimum set of core safety attributes? Those attributes can then be evolved into an industry-led set of basic safety standards and requirements. After 50 years of human space travel sponsored by governments, there are two basic conditions that now exist within the international space industry. The first, there is enough of a space-faring history to encourage the space industry to design, develop and operate human spaceflight systems without government contracts for anything other than services. Second, industry is capable of defining and enforcing a set of industry-based safety attributes and standards for human spaceflight to low-Earth orbit (LEO). This paper will explore both of these basic conditions with a focus on the safety attributes and standards. In the United States, the Federal Aviation Administration (FAA) is now starting to dialogue with industry about the basic safety principles and attributes needed for potential future regulatory oversight. This process is not yet formalized and will take a number of years once approval is given to move forward. Therefore, throughout the next few years, it is an excellent time and opportunity for industry to collaborate together and develop the core set of attributes and standards. As industry engages and embraces a common set of safety attributes, then government agencies, like the FAA and NASA can use that industry-based product to strengthen their efforts on a safe commercial spaceflight foundation for the future. As the commercial space industry takes the lead role in establishing core safety attributes, and then enforcing those attributes, the entire planet can move away from governmental control of design and development and let industry expand safe and successful space operations in LEO. At that point the

  12. International standards for optical wireless communications: state-of-the-art and future directions

    NASA Astrophysics Data System (ADS)

    Marciniak, Marian

    2017-10-01

    As the number of active OWC installations is growing fast, the standards for compatibility of co-existing neighbouring systems are being developed. The paper addresses the Laser Safety (IEC standards), ITU-T Study Group 15 standards (G.640 Co-location longitudinally compatible interfaces for free space optical systems), ITU-Radiocommunication Sector standards (P.1817-1 Propagation data required for the design of terrestrial free-space optical links), and the IEEE Work in Progress - standardization activity on Visible Light Communications. International standards of FSO communications have been reviewed and discussed. ITU, IEC, and IEEE International standards for Free-Space Optical links have been reviewed. The system reliability and availability as well as security issues will be addressed as well in the talk.

  13. Ad Hoc versus Standardized Admixtures for Continuous Infusion Drugs in Neonatal Intensive Care: Cognitive Task Analysis of Safety at the Bedside

    PubMed Central

    Brannon, Timothy S.

    2006-01-01

    Continuous infusion intravenous (IV) drugs in neonatal intensive care are usually prepared based on patient weight so that the dose is readable as a simple multiple of the infusion pump rate. New safety guidelines propose that hospitals switch to using standardized admixtures of these drugs to prevent calculation errors during ad hoc preparation. Extended hierarchical task analysis suggests that switching to standardized admixtures may lead to more errors in programming the pump at the bedside. PMID:17238482

  14. Biological safety cabinetry.

    PubMed Central

    Kruse, R H; Puckett, W H; Richardson, J H

    1991-01-01

    The biological safety cabinet is the one piece of laboratory and pharmacy equipment that provides protection for personnel, the product, and the environment. Through the history of laboratory-acquired infections from the earliest published case to the emergence of hepatitis B and AIDS, the need for health care worker protection is described. A brief description with design, construction, function, and production capabilities is provided for class I and class III safety cabinets. The development of the high-efficiency particulate air filter provided the impetus for clean room technology, from which evolved the class II laminar flow biological safety cabinet. The clean room concept was advanced when the horizontal airflow clean bench was manufactured; it became popular in pharmacies for preparing intravenous solutions because the product was protected. However, as with infectious microorganisms and laboratory workers, individual sensitization to antibiotics and the advent of hazardous antineoplastic agents changed the thinking of pharmacists and nurses, and they began to use the class II safety cabinet to prevent adverse personnel reactions to the drugs. How the class II safety cabinet became the mainstay in laboratories and pharmacies is described, and insight is provided into the formulation of National Sanitation Foundation standard number 49 and its revisions. The working operations of a class II cabinet are described, as are the variations of the four types with regard to design, function, air velocity profiles, and the use of toxins. The main certification procedures are explained, with examples of improper or incorrect certifications. The required levels of containment for microorganisms are given. Instructions for decontaminating the class II biological safety cabinet of infectious agents are provided; unfortunately, there is no method for decontaminating the cabinet of antineoplastic agents. Images PMID:2070345

  15. Safety in the Preschool.

    ERIC Educational Resources Information Center

    Settles, Mimi

    Guidelines for safety in the cooperative preschool are outlined, emphasizing control of the physical environment to insure maximum freedom for the children compatible with maximum safety. Building standards are set for stairways, rooms, lavatories, parking lots, harmful supplies, and wading pools. Orientation for safety is discussed in regard to…

  16. Software Safety Risk in Legacy Safety-Critical Computer Systems

    NASA Technical Reports Server (NTRS)

    Hill, Janice; Baggs, Rhoda

    2007-01-01

    Safety-critical computer systems must be engineered to meet system and software safety requirements. For legacy safety-critical computer systems, software safety requirements may not have been formally specified during development. When process-oriented software safety requirements are levied on a legacy system after the fact, where software development artifacts don't exist or are incomplete, the question becomes 'how can this be done?' The risks associated with only meeting certain software safety requirements in a legacy safety-critical computer system must be addressed should such systems be selected as candidates for reuse. This paper proposes a method for ascertaining formally, a software safety risk assessment, that provides measurements for software safety for legacy systems which may or may not have a suite of software engineering documentation that is now normally required. It relies upon the NASA Software Safety Standard, risk assessment methods based upon the Taxonomy-Based Questionnaire, and the application of reverse engineering CASE tools to produce original design documents for legacy systems.

  17. Safety of standard-dose (.9-mg/kg) alteplase intravenous thrombolysis for acute ischemic stroke in Afro-Caribbeans, French West Indies.

    PubMed

    Chausson, Nicolas; Olindo, Stéphane; Joux, Julien; Saint-Vil, Martine; Aveillan, Mathieu; Smadja, Didier

    2014-08-01

    Pharmacobiologic data suggested that people of African ancestry were more sensitive to the recombinant tissue plasminogen activator, alteplase, than Caucasians. Furthermore, the higher incidences of hypertension and diabetes mellitus in black populations could contribute to a higher cerebral bleeding risk. However, standard-dose (.9-mg/kg) alteplase safety for stroke has never been evaluated in blacks. This study was undertaken to evaluate standard-dose alteplase safety to treat strokes in an Afro-Caribbean population. Parenchymal hemorrhage and symptomatic intracerebral hemorrhage rates in Afro-Caribbean Martinicans given standard-dose alteplase for acute stroke were evaluated based on prospectively collected data from 2007 to 2010 and compared with those from studies on predominantly Caucasian stroke victims. Parenchymal hemorrhage type 2 and symptomatic intracerebral hemorrhages, as defined by the third European Cooperative Acute Stroke Study, respectively, occurred in 15 (10.1%) and 12 (8.1%) of the 148 thrombolyzed Afro-Caribbeans, respectively. This excess bleeding risk (parenchymal hemorrhage type 2) concerned more patients >70 than those 70 years of age or lesser (respectively, 17.6% [13 of 74] vs. 2.7% [2 of 74]). Older age was the only factor significantly associated with a higher parenchymal hemorrhage type 2 risk (P = .02). The excess hemorrhagic risk after standard-dose alteplase infusion into older Afro-Caribbean patients warrants further study to determine the possible role of cerebral microangiopathy and should be evaluated in different black populations. Copyright © 2014 National Stroke Association. Published by Elsevier Inc. All rights reserved.

  18. 49 CFR 571.224 - Standard No. 224; Rear impact protection.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR VEHICLE SAFETY STANDARDS Federal Motor Vehicle Safety Standards § 571.224 Standard No. 224; Rear impact protection. S1. Scope. This... motor vehicle, as defined in 49 CFR 171.8, is certified to carry hazardous materials and has a rear...

  19. 49 CFR 571.224 - Standard No. 224; Rear impact protection.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR VEHICLE SAFETY STANDARDS Federal Motor Vehicle Safety Standards § 571.224 Standard No. 224; Rear impact protection. S1. Scope. This... motor vehicle, as defined in 49 CFR 171.8, is certified to carry hazardous materials and has a rear...

  20. 49 CFR 571.224 - Standard No. 224; Rear impact protection.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR VEHICLE SAFETY STANDARDS Federal Motor Vehicle Safety Standards § 571.224 Standard No. 224; Rear impact protection. S1. Scope. This... motor vehicle, as defined in 49 CFR 171.8, is certified to carry hazardous materials and has a rear...

  1. 77 FR 13969 - Revising Standards Referenced in the Acetylene Standard

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-08

    .... OSHA-2011-0183] RIN 1218-AC64 Revising Standards Referenced in the Acetylene Standard AGENCY: Occupational Safety and Health Administration (OSHA), Department of Labor. ACTION: Final rule; confirmation of effective date. SUMMARY: OSHA is confirming the effective date of its direct final rule that revises the...

  2. Keeping Up with the Laws--There's Safety in Numbers.

    ERIC Educational Resources Information Center

    Rinere, Carol

    1990-01-01

    Describes a network formed by 96 school districts and 7 Boards of Cooperative Education Services to comply with New York State's 1980 chemical safety law. This shared services approach succeeds because of its cost effectiveness, convenience, and confidential liaison services. Major issues include recycling, sick building syndrome, disaster…

  3. A literature review of safety culture.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Cole, Kerstan Suzanne; Stevens-Adams, Susan Marie; Wenner, Caren A.

    2013-03-01

    Workplace safety has been historically neglected by organizations in order to enhance profitability. Over the past 30 years, safety concerns and attention to safety have increased due to a series of disastrous events occurring across many different industries (e.g., Chernobyl, Upper Big-Branch Mine, Davis-Besse etc.). Many organizations have focused on promoting a healthy safety culture as a way to understand past incidents, and to prevent future disasters. There is an extensive academic literature devoted to safety culture, and the Department of Energy has also published a significant number of documents related to safety culture. The purpose of the current endeavormore » was to conduct a review of the safety culture literature in order to understand definitions, methodologies, models, and successful interventions for improving safety culture. After reviewing the literature, we observed four emerging themes. First, it was apparent that although safety culture is a valuable construct, it has some inherent weaknesses. For example, there is no common definition of safety culture and no standard way for assessing the construct. Second, it is apparent that researchers know how to measure particular components of safety culture, with specific focus on individual and organizational factors. Such existing methodologies can be leveraged for future assessments. Third, based on the published literature, the relationship between safety culture and performance is tenuous at best. There are few empirical studies that examine the relationship between safety culture and safety performance metrics. Further, most of these studies do not include a description of the implementation of interventions to improve safety culture, or do not measure the effect of these interventions on safety culture or performance. Fourth, safety culture is best viewed as a dynamic, multi-faceted overall system composed of individual, engineered and organizational models. By addressing all three

  4. Commercial Passenger Vehicles: Safety Inspection of Commercial Buses and Vans Entering into the United States from Mexico

    DOT National Transportation Integrated Search

    1997-08-08

    In response to concerns about whether commercial passenger vehicles entering the United States from Mexico are meeting U.S. safety standards, this report describes (1) the number and types of commercial passenger vehicles entering U.S. border states ...

  5. 49 CFR 229.109 - Safety valves.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Safety valves. 229.109 Section 229.109..., DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Safety Requirements Steam Generators § 229.109 Safety valves. Every steam generator shall be equipped with at least two safety valves that have a...

  6. 49 CFR 229.109 - Safety valves.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Safety valves. 229.109 Section 229.109..., DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Safety Requirements Steam Generators § 229.109 Safety valves. Every steam generator shall be equipped with at least two safety valves that have a...

  7. 50 CFR 600.355 - National Standard 10-Safety of Life at Sea.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... measures shall, to the extent practicable, promote the safety of human life at sea. (b) General. (1... considered the same as “safety of human life at sea. The safety of a vessel and the people aboard is... their development to ensure they recognize any impact on the safety of human life at sea and minimize or...

  8. Software Development Standard Processes (SDSP)

    NASA Technical Reports Server (NTRS)

    Lavin, Milton L.; Wang, James J.; Morillo, Ronald; Mayer, John T.; Jamshidian, Barzia; Shimizu, Kenneth J.; Wilkinson, Belinda M.; Hihn, Jairus M.; Borgen, Rosana B.; Meyer, Kenneth N.; hide

    2011-01-01

    A JPL-created set of standard processes is to be used throughout the lifecycle of software development. These SDSPs cover a range of activities, from management and engineering activities, to assurance and support activities. These processes must be applied to software tasks per a prescribed set of procedures. JPL s Software Quality Improvement Project is currently working at the behest of the JPL Software Process Owner to ensure that all applicable software tasks follow these procedures. The SDSPs are captured as a set of 22 standards in JPL s software process domain. They were developed in-house at JPL by a number of Subject Matter Experts (SMEs) residing primarily within the Engineering and Science Directorate, but also from the Business Operations Directorate and Safety and Mission Success Directorate. These practices include not only currently performed best practices, but also JPL-desired future practices in key thrust areas like software architecting and software reuse analysis. Additionally, these SDSPs conform to many standards and requirements to which JPL projects are beholden.

  9. Alternative Fuels Data Center: E85 Codes and Standards

    Science.gov Websites

    Development Equipment Options Equipment Installation Codes, Standards, & Safety Vehicles Laws & ; Incentives Ethanol Codes, Standards, and Safety The U.S. Environmental Protection Agency's (EPA) Office of -Gasoline Blends. The Occupational Safety and Health Administration (OSHA) regulates some fuel-dispensing

  10. Child-safety Containers/Devices and Compounding.

    PubMed

    Allen, Loyd V

    2017-01-01

    The U.S. Consumer Product Safety Commission has been around since it was created in 1972 through the Consumer Product Safety Act. Its purpose is to protect "against unreasonable risks of injuries associated with consumer products." Manufactured drugs must meet the standards unless specifically exempted. Dispensing and compounding pharmacists must also meet the standards. Due to a smaller market size, compliant products to meet the U.S. Consumer Product Safety Commission's standards to aid compounding pharmacists have been slow in coming. However, now there are numerous different products, some introduced recently, which make it easier for compounding pharmacists to comply with the standards. The new technologies are innovative and serve a great need. Copyright© by International Journal of Pharmaceutical Compounding, Inc.

  11. Development of a safety service patrol uniform standard.

    DOT National Transportation Integrated Search

    1998-01-01

    The Virginia Department of Transportation's (VDOT) Safety Service Patrollers (SSP) use different color uniforms depending on their geographic location. Red jumpsuits are used in the Northern Virginia District, orange jumpsuits are used in the Frederi...

  12. 78 FR 66642 - Updating OSHA Standards Based on National Consensus Standards; Signage

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-06

    ... single standard is best. The ANSI Z535 designs, the traditional safety sign and tag designs, as well as... [Docket No. OSHA-2013-0005] RIN 1218-AC77 Updating OSHA Standards Based on National Consensus Standards... rule; confirmation of effective date. SUMMARY: On June 13, 2013, OSHA published in the Federal Register...

  13. Software safety

    NASA Technical Reports Server (NTRS)

    Leveson, Nancy

    1987-01-01

    Software safety and its relationship to other qualities are discussed. It is shown that standard reliability and fault tolerance techniques will not solve the safety problem for the present. A new attitude requires: looking at what you do NOT want software to do along with what you want it to do; and assuming things will go wrong. New procedures and changes to entire software development process are necessary: special software safety analysis techniques are needed; and design techniques, especially eliminating complexity, can be very helpful.

  14. Shelf-Stable Food Safety

    MedlinePlus

    ... Forms Standard Forms FSIS United States Department of Agriculture Food Safety and Inspection Service About FSIS District ... plants by inspectors from the U.S. Department of Agriculture's Food Safety and Inspection Service. Products made into ...

  15. What is the most relevant standard of success in assisted reproduction? Defining outcome in ART: a Gordian knot of safety, efficacy and quality.

    PubMed

    Land, Jolande A; Evers, Johannes L H

    2004-05-01

    In the course of the present Debate series, several new outcome measures for assisted reproduction have been proposed to encourage the transfer of fewer embryos, in order to diminish the number of multiple pregnancies. The implementation of these recommendations, however, is hampered by the perception that safety and efficacy are communicating vessels: it is presumed that by decreasing the number of embryos transferred, pregnancy rates will decrease as well. Data from national and international registries, however, do not confirm the assumption of the communicating vessels: pregnancy rates tend to be low in countries in which many embryos are transferred, and the highest pregnancy rates occur where the number of embryos per transfer is low. Only top-level clinics (where treatment efficacy is guaranteed) are able to decrease the number of embryos transferred without compromising their pregnancy rate, and to vouch for safety in this way. Elective single embryo transfer (eSET) can never be mandatory in all patients, but the percentage of eSETs performed by a particular assisted reproduction treatment centre does reflect its quality: the ultimate outcome measure of efficacy ánd safety. Therefore, the eSET rate is the most relevant qualifier of performance in assisted reproduction.

  16. National Partnership for Maternal Safety: Consensus Bundle on Safe Reduction of Primary Cesarean Births-Supporting Intended Vaginal Births.

    PubMed

    Lagrew, David C; Low, Lisa Kane; Brennan, Rita; Corry, Maureen P; Edmonds, Joyce K; Gilpin, Brian G; Frost, Jennifer; Pinger, Whitney; Reisner, Dale P; Jaffer, Sara

    2018-03-01

    Cesarean births and associated morbidity and mortality have reached near epidemic proportions. The National Partnership for Maternal Safety under the guidance of the Council on Patient Safety in Women's Health Care responded by developing a patient safety bundle to reduce the number of primary cesarean births. Safety bundles outline critical practices to implement in every maternity unit. This National Partnership for Maternity Safety bundle, as with other bundles, is organized into four domains: Readiness, Recognition and Prevention, Response, and Reporting and Systems Learning. Bundle components may be adapted to individual facilities, but standardization within an institution is advised. Evidence-based resources and recommendations are provided to assist implementation.

  17. [Study on the reorganization of standards related to food contact ceramics and porcelains].

    PubMed

    Zhang, Jianbo; Zhu, Lei; Zhang, Hong; Liu, Shan; Wang, Zhutian

    2014-07-01

    To solve the problem of overlap, iterance and conflict among current standards related to food contact ceramics and porcelains. To collect all the current standards related to food contact ceramics and porcelains and reorganize them following the settled principles and method and list the standards that need to be revoked, revised, incorporated, or keep valid and excluded from the food safety standard system. 19 standards were collected in this study and reorganized. The main food safety indexes in these standards were the limits for lead and cadmium that released from food contact ceramics and porcelains. There were released limits for lead and cadmium in 10 standards, including 4 horizontal standards and 6 commodity standards. The provisions in these 10 standards were in conflict. And as a result of this, the 4 horizontal standards were suggested to be incorporated and revised to one food safety standard, while the 6 commodity standards were suggested to be revised and exclude the lead and cadmium provisions. Another 7 commodity standards only referenced provisions for lead and cadmium limits from horizontal standards, and these 7 standards were suggested to be excluded from food safety standard system. There were no food safety indexes in 2 standards of the 19 standards, these standards were considered not related to food safety and no need to be reorganized. There were conflicts about the released limits of lead and cadmium among the current standards related to food contact ceramics and porcelains. So, it is necessary to a set up a new food safety standard for released lead and cadmium permissible limits which can apply to all food contact ceramics and porcelains. This food safety standard should be based on food safety risk assessment and the actual situations of manufacture and usage of food contact ceramics and porcelains. The provisions in international standards and relative standards from other countries can also provide references to this standard.

  18. 76 FR 24561 - Railroad Safety Advisory Committee; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-02

    ... Passenger Hours of Service, Training Standards, Track Safety Standards, Dark Territory, Passenger Safety... FRA on railroad safety matters. The RSAC is composed of 54 voting representatives from 31 member...

  19. Health IT for Patient Safety and Improving the Safety of Health IT.

    PubMed

    Magrabi, Farah; Ong, Mei-Sing; Coiera, Enrico

    2016-01-01

    Alongside their benefits health IT applications can pose new risks to patient safety. Problems with IT have been linked to many different types of clinical errors including prescribing and administration of medications; as well as wrong-patient, wrong-site errors, and delays in procedures. There is also growing concern about the risks of data breach and cyber-security. IT-related clinical errors have their origins in processes undertaken to design, build, implement and use software systems in a broader sociotechnical context. Safety can be improved with greater standardization of clinical software and by improving the quality of processes at different points in the technology life cycle, spanning design, build, implementation and use in clinical settings. Oversight processes can be set up at a regional or national level to ensure that clinical software systems meet specific standards. Certification and regulation are two mechanisms to improve oversight. In the absence of clear standards, guidelines are useful to promote safe design and implementation practices. Processes to identify and mitigate hazards can be formalised via a safety management system. Minimizing new patient safety risks is critical to realizing the benefits of IT.

  20. Stereotactic body radiotherapy (SBRT) for multiple pulmonary oligometastases: Analysis of number and timing of repeat SBRT as impact factors on treatment safety and efficacy.

    PubMed

    Klement, R J; Hoerner-Rieber, J; Adebahr, S; Andratschke, N; Blanck, O; Boda-Heggemann, J; Duma, M; Eble, M J; Eich, H C; Flentje, M; Gerum, S; Hass, P; Henkenberens, C; Hildebrandt, G; Imhoff, D; Kahl, K H; Klass, N D; Krempien, R; Lohaus, F; Petersen, C; Schrade, E; Wendt, T G; Wittig, A; Guckenberger, M

    2018-03-03

    Stereotactic body radiotherapy (SBRT) for oligometastatic disease is characterized by an excellent safety profile; however, experiences are mostly based on treatment of one single metastasis. It was the aim of this study to evaluate safety and efficacy of SBRT for multiple pulmonary metastases. This study is based on a retrospective database of the DEGRO stereotactic working group, consisting of 637 patients with 858 treatments. Cox regression and logistic regression were used to analyze the association between the number of SBRT treatments or the number and the timing of repeat SBRT courses with overall survival (OS) and the risk of early death. Out of 637 patients, 145 patients were treated for multiple pulmonary metastases; 88 patients received all SBRT treatments within one month whereas 57 patients were treated with repeat SBRT separated by at least one month. Median OS for the total patient population was 23.5 months and OS was not significantly influenced by the overall number of SBRT treatments or the number and timing of repeat SBRT courses. The risk of early death within 3 and 6 months was not increased in patients treated with multiple SBRT treatments, and no grade 4 or grade 5 toxicity was observed in these patients. In appropriately selected patients, synchronous SBRT for multiple pulmonary oligometastases and repeat SBRT may have a comparable safety and efficacy profile compared to SBRT for one single oligometastasis. Copyright © 2018 Elsevier B.V. All rights reserved.

  1. Roads to Safety.

    ERIC Educational Resources Information Center

    Hauer, Ezra

    1991-01-01

    Contends that the level of safety built into roads is largely unpremeditated and that roads and highways are not as safe as they might be. Discusses practices, standards, and deficiencies in highway and traffic safety related to geometric design and traffic engineering. Recommends increased transportation engineering professionalism and public…

  2. Standardization Today and Tomorrow

    DTIC Science & Technology

    1998-05-01

    products and for occupational safety and health protection, into a majority rule, the elaboration and adoption of directives was additionally speeded up...they contain. Safety standards serve to protect life, health and material goods and so, for the field of technology, express the requirements laid...p. 19, 13.02.1996 Press release 05-97: Entscheidung zum Arbeitsschutzmanagement (Decision on industrial safety management ) http://www.din.de

  3. Tighter Safety Rules Ahead for Academic Labs

    ERIC Educational Resources Information Center

    Long, Janice R.

    1975-01-01

    Indicates that specific laboratory standards for handling chemical carcinogens should become law in the near future. Small colleges and universities may have financial trouble in complying with laboratory safety standards investigated by the Occupational Safety and Health Administration. (GS)

  4. 14 CFR 27.1413 - Safety belts.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Safety belts. 27.1413 Section 27.1413 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Equipment Safety Equipment § 27.1413 Safety belts. Each safety belt...

  5. 14 CFR 27.1413 - Safety belts.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Safety belts. 27.1413 Section 27.1413 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Equipment Safety Equipment § 27.1413 Safety belts. Each safety belt...

  6. Test Operations Procedure (TOP) 03-2-504A Safety Evaluation of Small Arms and Medium Caliber Weapons

    DTIC Science & Technology

    2013-05-29

    Assessment HHAR Health Hazard Assessment Report HERO Hazards of Electromagnetic Radiation to Ordnance in. inch J Joule km/hr kilometers per hour...help standardize testing and to specify tests commonly used to identify and assess safety hazards associated with the use of small arms. The...19b. TELEPHONE NUMBER (include area code) Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std. Z39-18

  7. CHEMISTRY FOR THE SAFETY MAN. SAFETY IN INDUSTRY--ENVIRONMENTAL AND CHEMICAL HAZARDS SERVICES.

    ERIC Educational Resources Information Center

    CESTRONE, PATRICK F.

    THIS BULLETIN, ONE OF A SERIES ON SAFETY IN INDUSTRY, IS INTENDED TO PROVIDE THE BACKGROUND WHICH WILL ENABLE THE SAFETY MAN TO UNDERSTAND SOME OF THE PRINCIPLES APPLIED IN CONTROLLING CHEMICAL HAZARDS. IT WAS PREPARED IN THE OFFICE OF OCCUPATIONAL SAFETY, DIVISION OF PROGRAMING AND RESEARCH, BUREAU OF LABOR STANDARDS. TOPICS INCLUDE (1) WHAT IS…

  8. 30 CFR 57.19132 - Safety catches.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Safety catches. 57.19132 Section 57.19132 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Personnel Hoisting...

  9. 30 CFR 56.19132 - Safety catches.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Safety catches. 56.19132 Section 56.19132 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Personnel Hoisting...

  10. 30 CFR 57.6502 - Safety fuse.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Safety fuse. 57.6502 Section 57.6502 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Explosives Nonelectric Blasting...

  11. 30 CFR 57.19132 - Safety catches.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Safety catches. 57.19132 Section 57.19132 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Personnel Hoisting...

  12. 30 CFR 56.19132 - Safety catches.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Safety catches. 56.19132 Section 56.19132 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Personnel Hoisting...

  13. 29 CFR 1960.18 - Supplementary standards.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... occupational safety and health committees. If the Secretary finds the permanent supplementary standard to be...

  14. 29 CFR 1960.18 - Supplementary standards.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... occupational safety and health committees. If the Secretary finds the permanent supplementary standard to be...

  15. Cryptographically supported NFC tags in medication for better inpatient safety.

    PubMed

    Özcanhan, Mehmet Hilal; Dalkılıç, Gökhan; Utku, Semih

    2014-08-01

    Reliable sources report that errors in drug administration are increasing the number of harmed or killed inpatients, during healthcare. This development is in contradiction to patient safety norms. A correctly designed hospital-wide ubiquitous system, using advanced inpatient identification and matching techniques, should provide correct medicine and dosage at the right time. Researchers are still making grouping proof protocol proposals based on the EPC Global Class 1 Generation 2 ver. 1.2 standard tags, for drug administration. Analyses show that such protocols make medication unsecure and hence fail to guarantee inpatient safety. Thus, the original goal of patient safety still remains. In this paper, a very recent proposal (EKATE) upgraded by a cryptographic function is shown to fall short of expectations. Then, an alternative proposal IMS-NFC which uses a more suitable and newer technology; namely Near Field Communication (NFC), is described. The proposed protocol has the additional support of stronger security primitives and it is compliant to ISO communication and security standards. Unlike previous works, the proposal is a complete ubiquitous system that guarantees full patient safety; and it is based on off-the-shelf, new technology products available in every corner of the world. To prove the claims the performance, cost, security and scope of IMS-NFC are compared with previous proposals. Evaluation shows that the proposed system has stronger security, increased patient safety and equal efficiency, at little extra cost.

  16. 29 CFR 1990.152 - Model emergency temporary standard pursuant to section 6(c) of the Act.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (insert section number of standard) (a) Scope and application—(1) General. This section applies to all... Occupational Safety and Health, U.S. Department of Health, Education and Welfare, or designee. Emergency means... appropriate exposure limit representing a level that can be complied with immediately) as an eight (8)-hour...

  17. 29 CFR 1990.152 - Model emergency temporary standard pursuant to section 6(c) of the Act.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (insert section number of standard) (a) Scope and application—(1) General. This section applies to all... Occupational Safety and Health, U.S. Department of Health, Education and Welfare, or designee. Emergency means... appropriate exposure limit representing a level that can be complied with immediately) as an eight (8)-hour...

  18. 29 CFR 1990.152 - Model emergency temporary standard pursuant to section 6(c) of the Act.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (insert section number of standard) (a) Scope and application—(1) General. This section applies to all... Occupational Safety and Health, U.S. Department of Health, Education and Welfare, or designee. Emergency means... appropriate exposure limit representing a level that can be complied with immediately) as an eight (8)-hour...

  19. 29 CFR 1990.152 - Model emergency temporary standard pursuant to section 6(c) of the Act.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (insert section number of standard) (a) Scope and application—(1) General. This section applies to all... Occupational Safety and Health, U.S. Department of Health, Education and Welfare, or designee. Emergency means... appropriate exposure limit representing a level that can be complied with immediately) as an eight (8)-hour...

  20. 29 CFR 1990.152 - Model emergency temporary standard pursuant to section 6(c) of the Act.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (insert section number of standard) (a) Scope and application—(1) General. This section applies to all... Occupational Safety and Health, U.S. Department of Health, Education and Welfare, or designee. Emergency means... appropriate exposure limit representing a level that can be complied with immediately) as an eight (8)-hour...

  1. Does compliance to patient safety tasks improve and sustain when radiotherapy treatment processes are standardized?

    PubMed

    Simons, Pascale A M; Houben, Ruud; Benders, Jos; Pijls-Johannesma, Madelon; Vandijck, Dominique; Marneffe, Wim; Backes, Huub; Groothuis, Siebren

    2014-10-01

    To realize safe radiotherapy treatment, processes must be stabilized. Standard operating procedures (SOP's) were expected to stabilize the treatment process and perceived task importance would increase sustainability in compliance. This paper presents the effects on compliance to safety related tasks of a process redesign based on lean principles. Compliance to patient safety tasks was measured by video recording of actual radiation treatment, before (T0), directly after (T1) and 1.5 years after (T2) a process redesign. Additionally, technologists were surveyed on perceived task importance and reported incidents were collected for three half-year periods between 2007 and 2009. Compliance to four out of eleven tasks increased at T1, of which improvements on three sustained (T2). Perceived importance of tasks strongly correlated (0.82) to compliance rates at T2. The two tasks, perceived as least important, presented low base-line compliance, improved (T1), but relapsed at T2. The reported near misses (patient-level not reached) on accelerators increased (P < 0.001) from 144 (2007) to 535 (2009), while the reported misses (patient-level reached) remained constant. Compliance to specific tasks increased after introducing SOP's and improvements sustained after 1.5 years, indicating increased stability. Perceived importance of tasks correlated positively to compliance and sustainability. Raising the perception of task importance is thus crucial to increase compliance. The redesign resulted in increased willingness to report incidents, creating opportunities for patient safety improvement in radiotherapy treatment. Copyright © 2014 Elsevier Ltd. All rights reserved.

  2. Quality of reporting in clinical trials of preharvest food safety interventions and associations with treatment effect.

    PubMed

    Sargeant, Jan M; Saint-Onge, Jacqueline; Valcour, James; Thompson, Adam; Elgie, Robyn; Snedeker, Kate; Marcynuk, Pasha

    2009-10-01

    Randomized controlled trials (RCTs) are the gold standard for evaluating treatment efficacy. Therefore, it is important that RCTs are conducted with methodological rigor to prevent biased results and report results in a manner that allows the reader to evaluate internal and external validity. Most human health journals now require manuscripts to meet the Consolidated Standards of Reporting Trials (CONSORT) criteria for reporting of RCTs. Our objective was to evaluate preharvest food safety trials using a modification of the CONSORT criteria to assess methodological quality and completeness of reporting, and to investigate associations between reporting and treatment effects. One hundred randomly selected trials were evaluated using a modified CONSORT statement. The majority of the selected trials (84%) used a deliberate disease challenge, with the remainder representing natural pathogen exposure. There were widespread deficiencies in the reporting of many trial features. Randomization, double blinding, and the number of subjects lost to follow-up were reported in only 46%, 0%, and 43% of trials, respectively. The inclusion criteria for study subjects were only described in 16% of trials, and the number of animals housed together was only stated in 52% of the trials. Although 91 trials had more than one outcome, no trials specified the primary outcome of interest. There were significant bivariable associations between the proportion of positive treatment effects and failure to report the number of subjects lost to follow-up, the number of animals housed together in a group, the level of treatment allocation, and possible study limitations. The results suggest that there are substantive deficiencies in reporting of preharvest food safety trials, and that these deficiencies may be associated with biased treatment effects. The creation and adoption of standards for reporting in preharvest food safety trials will help to ensure the inclusion of important trial details

  3. Interdisciplinary group approach to occupational safety and health administration standard: reductions in cost and duplication of effort.

    PubMed

    Canola, T; Kirkis, E J; Meckes, P F; Pitts, S B

    1994-06-01

    After the December 1991 publication of the Occupational Safety and Health Administration standard, "Occupational Exposure to Bloodborne Pathogens; Final Rule," medical facilities in the United States were challenged to meet the mandates of this standard with massive training in a relatively short time. An interdisciplinary task force composed of representative members of a major health maintenance organization was charged with the task of developing a training plan for 11 Southern California medical centers and their 42 satellite medical offices. The task force ultimately developed, refined, and distributed a Trainer Guidebook that could be used by a variety of disciplines. This guidebook provided a method by which the information could be disseminated concisely, thoroughly, and promptly. The processes used in this project can be applied to other health care educational situations. The purpose of this article is to share these processes.

  4. Crashworthiness of Small Poststandard School Buses: Safety Study.

    ERIC Educational Resources Information Center

    National Transportation Safety Board (DOT), Washington, DC.

    In 1977, a series of Federal Motor Vehicle Safety Standards (FMVSS) for school buses became effective, mandating different performance standards for school buses compared to other buses. Because data on the crash performance of school buses built to these standards were lacking, the National Transportation Safety Board conducted a series of…

  5. 49 CFR 238.103 - Fire safety.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Fire safety. 238.103 Section 238.103..., DEPARTMENT OF TRANSPORTATION PASSENGER EQUIPMENT SAFETY STANDARDS Safety Planning and General Requirements § 238.103 Fire safety. (a) Materials. (1) Materials used in constructing a passenger car or a cab of a...

  6. 30 CFR 56.6502 - Safety fuse.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Safety fuse. 56.6502 Section 56.6502 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Explosives Nonelectric Blasting § 56...

  7. Safety and Health Hazard Observations in Hmong Farming Operations

    PubMed Central

    Neitzel, R. L.; Krenz, J.; de Castro, A. B.

    2014-01-01

    Agricultural workers have a high risk of occupational injuries, illnesses, and fatalities. However, there are very few standardized tools available to assess safety and health in agricultural operations. Additionally, there are a number of groups of agricultural workers, including Hmong refugees and immigrants, for which virtually no information on safety and health conditions is available. This study developed an observation-based methodology for systematically evaluating occupational health and safety hazards in agriculture, and pilot-tested this on several small-scale Hmong farming operations. Each observation assessed of range of safety and health hazards (e.g., musculoskeletal hazards, dust and pollen, noise, and mechanical hazards), as well as on factors such as type of work area, presence of personal protective equipment, and weather conditions. Thirty-six observations were collected on nine farms. The most common hazards observed were bending at the back and lifting <50 pounds. Use of sharp tools without adequate guarding mechanisms, awkward postures, repetitive hand motions, and lifting >50 pounds were also common. The farming activities observed involved almost no power equipment, and no pesticide or chemical handling was observed. The use of personal protective equipment was uncommon. The results of this assessment agreed well with a parallel study of perceived safety and health hazards among Hmong agricultural workers. This study suggests that small-scale Hmong farming operations involve a variety of hazards, and that occupational health interventions may be warranted in this community. The study also demonstrates the utility of standardized assessment tools and mixed-method approaches to hazard evaluation. PMID:24911689

  8. 41 CFR 128-1.8005 - Seismic safety standards.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... the model building codes that the Interagency Committee on Seismic Safety in Construction (ICSSC...) Uniform Building Code (UBC); (2) The 1992 Supplement to the Building Officials and Code Administrators International (BOCA) National Building Code (NBC); and (3) The 1992 Amendments to the Southern Building Code...

  9. 41 CFR 128-1.8005 - Seismic safety standards.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... the model building codes that the Interagency Committee on Seismic Safety in Construction (ICSSC...) Uniform Building Code (UBC); (2) The 1992 Supplement to the Building Officials and Code Administrators International (BOCA) National Building Code (NBC); and (3) The 1992 Amendments to the Southern Building Code...

  10. 41 CFR 128-1.8005 - Seismic safety standards.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... the model building codes that the Interagency Committee on Seismic Safety in Construction (ICSSC...) Uniform Building Code (UBC); (2) The 1992 Supplement to the Building Officials and Code Administrators International (BOCA) National Building Code (NBC); and (3) The 1992 Amendments to the Southern Building Code...

  11. 41 CFR 128-1.8005 - Seismic safety standards.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... the model building codes that the Interagency Committee on Seismic Safety in Construction (ICSSC...) Uniform Building Code (UBC); (2) The 1992 Supplement to the Building Officials and Code Administrators International (BOCA) National Building Code (NBC); and (3) The 1992 Amendments to the Southern Building Code...

  12. 36 CFR 910.37 - Fire and life safety.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 36 Parks, Forests, and Public Property 3 2011-07-01 2011-07-01 false Fire and life safety. 910.37... DEVELOPMENT AREA Standards Uniformly Applicable to the Development Area § 910.37 Fire and life safety. As a... recommended that all new development be guided by standards of the NFPA Codes for fire and life safety and...

  13. 36 CFR 910.37 - Fire and life safety.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Fire and life safety. 910.37... DEVELOPMENT AREA Standards Uniformly Applicable to the Development Area § 910.37 Fire and life safety. As a... recommended that all new development be guided by standards of the NFPA Codes for fire and life safety and...

  14. Range Flight Safety Requirements

    NASA Technical Reports Server (NTRS)

    Loftin, Charles E.; Hudson, Sandra M.

    2018-01-01

    The purpose of this NASA Technical Standard is to provide the technical requirements for the NPR 8715.5, Range Flight Safety Program, in regards to protection of the public, the NASA workforce, and property as it pertains to risk analysis, Flight Safety Systems (FSS), and range flight operations. This standard is approved for use by NASA Headquarters and NASA Centers, including Component Facilities and Technical and Service Support Centers, and may be cited in contract, program, and other Agency documents as a technical requirement. This standard may also apply to the Jet Propulsion Laboratory or to other contractors, grant recipients, or parties to agreements to the extent specified or referenced in their contracts, grants, or agreements, when these organizations conduct or participate in missions that involve range flight operations as defined by NPR 8715.5.1.2.2 In this standard, all mandatory actions (i.e., requirements) are denoted by statements containing the term “shall.”1.3 TailoringTailoring of this standard for application to a specific program or project shall be formally documented as part of program or project requirements and approved by the responsible Technical Authority in accordance with NPR 8715.3, NASA General Safety Program Requirements.

  15. Determination of the viscosity number of thermoplastics in dilute solution; polyamides (PA)

    NASA Technical Reports Server (NTRS)

    1985-01-01

    This West German Standard presents a test used to determine the viscosity number of polyamides and copolyamides which are easily diluted in sulfuric acid, and for other polyamides which are less easily diluted in sulfuric acid, and which are diluted in m-cresol. As formic acid is often used in industry instead of sulfuric acid, this solvent is also presented as an alternative, however, sulfuric acid is preferred because of the thermodynamic solubility characteristics of the polyamides and the handling safety. In addition, it is shown which solvent should be used for each polyamide. Finally, determinations concerning the preparation of the samples are presented. Using the viscosity number, a determination of the molar mass of the polyamides is possible.

  16. An Investigation of Health and Safety Measures in a Hydroelectric Power Plant.

    PubMed

    Acakpovi, Amevi; Dzamikumah, Lucky

    2016-12-01

    Occupational risk management is known as a catalyst in generating superior returns for all stakeholders on a sustainable basis. A number of companies in Ghana implemented health and safety measures adopted from international companies to ensure the safety of their employees. However, there exist great threats to employees' safety in these companies. The purpose of this paper is to investigate the level of compliance of Occupational Health and Safety management systems and standards set by international and local legislation in power producing companies in Ghana. The methodology is conducted by administering questionnaires and in-depth interviews as measuring instruments. A random sampling technique was applied to 60 respondents; only 50 respondents returned their responses. The questionnaire was developed from a literature review and contained questions and items relevant to the initial research problem. A factor analysis was also carried out to investigate the influence of some variables on safety in general. Results showed that the significant factors that influence the safety of employees at the hydroelectric power plant stations are: lack of training and supervision, non-observance of safe work procedures, lack of management commitment, and lack of periodical check on machine operations. The study pointed out the safety loopholes and therefore helped improve the health and safety measures of employees in the selected company by providing effective recommendations. The implementation of the proposed recommendations in this paper, would lead to the prevention of work-related injuries and illnesses of employees as well as property damage and incidents in hydroelectric power plants. The recommendations may equally be considered as benchmark for the Safety and Health Management System with international standards.

  17. Effects of the Occupational Safety and Health Administration's control of hazardous energy (lockout/tagout) standard on rates of machinery-related fatal occupational injury.

    PubMed

    Bulzacchelli, Maria T; Vernick, Jon S; Webster, Daniel W; Lees, Peter S J

    2007-10-01

    To evaluate the impact of the United States' federal Occupational Safety and Health Administration's control of hazardous energy (lockout/tagout) standard on rates of machinery-related fatal occupational injury. The standard, which took effect in 1990, requires employers in certain industries to establish an energy control program and sets minimum criteria for energy control procedures, training, inspections, and hardware. An interrupted time-series design was used to determine the standard's effect on fatality rates. Machinery-related fatalities, obtained from the National Traumatic Occupational Fatalities surveillance system for 1980 through 2001, were used as a proxy for lockout/tagout-related fatalities. Linear regression was used to control for changes in demographic and economic factors. The average annual crude rate of machinery-related fatalities in manufacturing changed little from 1980 to 1989, but declined by 4.59% per year from 1990 to 2001. However, when controlling for demographic and economic factors, the regression model estimate of the standard's effect is a small, non-significant increase of 0.05 deaths per 100 000 production worker full-time equivalents (95% CI -0.14 to 0.25). When fatality rates in comparison groups that should not have been affected by the standard are incorporated into the analysis, there is still no significant change in the rate of machinery-related fatalities in manufacturing. There is no evidence that the lockout/tagout standard decreased fatality rates relative to other trends in occupational safety over the study period. A possible explanation is voluntary use of lockout/tagout by some employers before introduction of the standard and low compliance by other employers after.

  18. Effects of the Occupational Safety and Health Administration's control of hazardous energy (lockout/tagout) standard on rates of machinery‐related fatal occupational injury

    PubMed Central

    Bulzacchelli, Maria T; Vernick, Jon S; Webster, Daniel W; Lees, Peter S J

    2007-01-01

    Objective To evaluate the impact of the United States' federal Occupational Safety and Health Administration's control of hazardous energy (lockout/tagout) standard on rates of machinery‐related fatal occupational injury. The standard, which took effect in 1990, requires employers in certain industries to establish an energy control program and sets minimum criteria for energy control procedures, training, inspections, and hardware. Design An interrupted time‐series design was used to determine the standard's effect on fatality rates. Machinery‐related fatalities, obtained from the National Traumatic Occupational Fatalities surveillance system for 1980 through 2001, were used as a proxy for lockout/tagout‐related fatalities. Linear regression was used to control for changes in demographic and economic factors. Results The average annual crude rate of machinery‐related fatalities in manufacturing changed little from 1980 to 1989, but declined by 4.59% per year from 1990 to 2001. However, when controlling for demographic and economic factors, the regression model estimate of the standard's effect is a small, non‐significant increase of 0.05 deaths per 100 000 production worker full‐time equivalents (95% CI −0.14 to 0.25). When fatality rates in comparison groups that should not have been affected by the standard are incorporated into the analysis, there is still no significant change in the rate of machinery‐related fatalities in manufacturing. Conclusions There is no evidence that the lockout/tagout standard decreased fatality rates relative to other trends in occupational safety over the study period. A possible explanation is voluntary use of lockout/tagout by some employers before introduction of the standard and low compliance by other employers after. PMID:17916891

  19. Examining the Relationship between Safety Management System Implementation and Safety Culture in Collegiate Flight Schools

    ERIC Educational Resources Information Center

    Robertson, Mike Fuller

    2017-01-01

    Safety Management Systems (SMS) are becoming the industry standard for safety management throughout the aviation industry. As the Federal Aviation Administration (FAA) continues to mandate SMS for different segments, the assessment of an organization's safety culture becomes more important. An SMS can facilitate the development of a strong…

  20. Does Employee Safety Matter for Patients Too? Employee Safety Climate and Patient Safety Culture in Health Care.

    PubMed

    Mohr, David C; Eaton, Jennifer Lipkowitz; McPhaul, Kathleen M; Hodgson, Michael J

    2015-04-22

    We examined relationships between employee safety climate and patient safety culture. Because employee safety may be a precondition for the development of patient safety, we hypothesized that employee safety culture would be strongly and positively related to patient safety culture. An employee safety climate survey was administered in 2010 and assessed employees' views and experiences of safety for employees. The patient safety survey administered in 2011 assessed the safety culture for patients. We performed Pearson correlations and multiple regression analysis to examine the relationships between a composite measure of employee safety with subdimensions of patient safety culture. The regression models controlled for size, geographic characteristics, and teaching affiliation. Analyses were conducted at the group level using data from 132 medical centers. Higher employee safety climate composite scores were positively associated with all 9 patient safety culture measures examined. Standardized multivariate regression coefficients ranged from 0.44 to 0.64. Medical facilities where staff have more positive perceptions of health care workplace safety climate tended to have more positive assessments of patient safety culture. This suggests that patient safety culture and employee safety climate could be mutually reinforcing, such that investments and improvements in one domain positively impacts the other. Further research is needed to better understand the nexus between health care employee and patient safety to generalize and act upon findings.

  1. International trade standards for commodities and products derived from animals: the need for a system that integrates food safety and animal disease risk management.

    PubMed

    Thomson, G R; Penrith, M-L; Atkinson, M W; Thalwitzer, S; Mancuso, A; Atkinson, S J; Osofsky, S A

    2013-12-01

    A case is made for greater emphasis to be placed on value chain management as an alternative to geographically based disease risk mitigation for trade in commodities and products derived from animals. The geographic approach is dependent upon achievement of freedom in countries or zones from infectious agents that cause so-called transboundary animal diseases, while value chain-based risk management depends upon mitigation of animal disease hazards potentially associated with specific commodities or products irrespective of the locality of production. This commodity-specific approach is founded on the same principles upon which international food safety standards are based, viz. hazard analysis critical control points (HACCP). Broader acceptance of a value chain approach enables animal disease risk management to be combined with food safety management by the integration of commodity-based trade and HACCP methodologies and thereby facilitates 'farm to fork' quality assurance. The latter is increasingly recognized as indispensable to food safety assurance and is therefore a pre-condition to safe trade. The biological principles upon which HACCP and commodity-based trade are based are essentially identical, potentially simplifying sanitary control in contrast to current separate international sanitary standards for food safety and animal disease risks that are difficult to reconcile. A value chain approach would not only enable more effective integration of food safety and animal disease risk management of foodstuffs derived from animals but would also ameliorate adverse environmental and associated socio-economic consequences of current sanitary standards based on the geographic distribution of animal infections. This is especially the case where vast veterinary cordon fencing systems are relied upon to separate livestock and wildlife as is the case in much of southern Africa. A value chain approach would thus be particularly beneficial to under-developed regions of

  2. 77 FR 40891 - Towing Safety Advisory Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-11

    ... ``Recommendations for Safety Standards of Portable Facility Vapor Control Systems.'' (4) Period for public comment... teleconference to review and discuss a new Task Statement titled ``Recommendations for Safety Standards of Portable Facility Vapor Control Systems'' and to discuss the progress of open Task Statements. This meeting...

  3. 29 CFR 500.133 - Substantive Federal and State safety and health standards defined.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., DEPARTMENT OF LABOR REGULATIONS MIGRANT AND SEASONAL AGRICULTURAL WORKER PROTECTION Motor Vehicle Safety and Insurance for Transportation of Migrant and Seasonal Agricultural Workers, Housing Safety and Health for Migrant Workers Housing Safety and Health § 500.133 Substantive Federal and State safety and health...

  4. 16 CFR 1750.7 - Provision for changes in the standard.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ....7 Section 1750.7 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION REFRIGERATOR SAFETY ACT REGULATIONS STANDARD FOR DEVICES TO PERMIT THE OPENING OF HOUSEHOLD REFRIGERATOR DOORS FROM THE INSIDE § 1750... wishing to propose a change in this standard shall submit to the Secretary, Consumer Product Safety...

  5. 16 CFR 1750.7 - Provision for changes in the standard.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ....7 Section 1750.7 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION REFRIGERATOR SAFETY ACT REGULATIONS STANDARD FOR DEVICES TO PERMIT THE OPENING OF HOUSEHOLD REFRIGERATOR DOORS FROM THE INSIDE § 1750... wishing to propose a change in this standard shall submit to the Secretary, Consumer Product Safety...

  6. 16 CFR 1750.7 - Provision for changes in the standard.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ....7 Section 1750.7 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION REFRIGERATOR SAFETY ACT REGULATIONS STANDARD FOR DEVICES TO PERMIT THE OPENING OF HOUSEHOLD REFRIGERATOR DOORS FROM THE INSIDE § 1750... wishing to propose a change in this standard shall submit to the Secretary, Consumer Product Safety...

  7. 49 CFR 229.307 - Safety analysis.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 4 2014-10-01 2014-10-01 false Safety analysis. 229.307 Section 229.307 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Locomotive Electronics § 229.307 Safety...

  8. 49 CFR 229.307 - Safety analysis.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 4 2013-10-01 2013-10-01 false Safety analysis. 229.307 Section 229.307 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Locomotive Electronics § 229.307 Safety...

  9. 49 CFR 229.307 - Safety analysis.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Safety analysis. 229.307 Section 229.307 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Locomotive Electronics § 229.307 Safety...

  10. Description of the food safety system in hotels and how it compares with HACCP standards.

    PubMed

    Fletcher, Stephanie M; Maharaj, Satnarine R; James, Kenneth

    2009-01-01

    Tourism is an important earner of foreign exchange in Jamaica; hence, the protection of the visitors' health is very important. A study of travelers to Jamaica in 1996 to 1997 found that travelers' diarrhea (TD) affected almost 25% of visitors. The Ministry of Health (Jamaica) initiated a program for the prevention and control of TD aimed at reducing attack rates from 25.0% to 12.0% over a 5-year period through environmental health and food safety standards of hotels. This article examines the food safety systems in Jamaican hotels located in a popular resort area to find out how comparable they are with the Hazard Analysis Critical Control Point (HACCP) strategy. A cross-sectional study was done of hotels in St. Mary and St. Ann. Quantitative data were obtained from food and beverage/sanitation staff and qualitative data through in-depth interviews with hotel managers. Observation of the food safety operations was also done. The majority (75%) of larger hotels used a combination of HACCP and Ministry of Health food safety strategies (p = 0.02) and offered all-inclusive services (r =-0.705, p = 0.001). Larger hotels were more likely to have a better quality team approach, HACCP plan, and monitoring of critical control points (CCPs) and more likely to receive higher scores (p < 0.05). More than two thirds of hotel staff were knowledgeable of HACCP. Significantly smaller hotels (87.5%) received less than 70% in overall score (r = 0.75, p = 0.01). Identification of CCPs and monitoring of CCPs explained 96.6% of the change in the overall HACCP scores (p = 0.001). Hotel managers felt that some hotels' systems were comparable with HACCP and that larger properties were ready for mandatory implementation. Conclusions. While some components of the HACCP system were observed in larger hotels, there were serious shortcomings in its comparison. Mandatory implementation of HACCP would require that sector-specific policies be developed for smaller hotels and implemented on a

  11. Laboratory errors and patient safety.

    PubMed

    Miligy, Dawlat A

    2015-01-01

    Laboratory data are extensively used in medical practice; consequently, laboratory errors have a tremendous impact on patient safety. Therefore, programs designed to identify and reduce laboratory errors, as well as, setting specific strategies are required to minimize these errors and improve patient safety. The purpose of this paper is to identify part of the commonly encountered laboratory errors throughout our practice in laboratory work, their hazards on patient health care and some measures and recommendations to minimize or to eliminate these errors. Recording the encountered laboratory errors during May 2008 and their statistical evaluation (using simple percent distribution) have been done in the department of laboratory of one of the private hospitals in Egypt. Errors have been classified according to the laboratory phases and according to their implication on patient health. Data obtained out of 1,600 testing procedure revealed that the total number of encountered errors is 14 tests (0.87 percent of total testing procedures). Most of the encountered errors lay in the pre- and post-analytic phases of testing cycle (representing 35.7 and 50 percent, respectively, of total errors). While the number of test errors encountered in the analytic phase represented only 14.3 percent of total errors. About 85.7 percent of total errors were of non-significant implication on patients health being detected before test reports have been submitted to the patients. On the other hand, the number of test errors that have been already submitted to patients and reach the physician represented 14.3 percent of total errors. Only 7.1 percent of the errors could have an impact on patient diagnosis. The findings of this study were concomitant with those published from the USA and other countries. This proves that laboratory problems are universal and need general standardization and bench marking measures. Original being the first data published from Arabic countries that

  12. Missouri Secondary Science Safety Manual.

    ERIC Educational Resources Information Center

    Lemons, Judith L.

    The purpose of this safety manual is to provide a resource to help manage and minimize potential risks in science classrooms where students spend up to 60% of instructional time engaged in hands-on activities. This manual contains information on standards, legal aspects, and responsibilities for science safety; general laboratory safety for…

  13. Calculation of the state of safety (SOS) for lithium ion batteries

    NASA Astrophysics Data System (ADS)

    Cabrera-Castillo, Eliud; Niedermeier, Florian; Jossen, Andreas

    2016-08-01

    As lithium ion batteries are adopted in electric vehicles and stationary storage applications, the higher number of cells and greater energy densities increases the risks of possible catastrophic events. This paper shows a definition and method to calculate the state of safety of an energy storage system based on the concept that safety is inversely proportional to the concept of abuse. As the latter increases, the former decreases to zero. Previous descriptions in the literature are qualitative in nature but don't provide a numerical quantification of the safety of a storage system. In the case of battery testing standards, they only define pass or fail criteria. The proposed state uses the same range as other commonly used state quantities like the SOC, SOH, and SOF, taking values between 0, completely unsafe, and 1, completely safe. The developed function combines the effects of an arbitrary number of subfunctions, each of which describes a particular case of abuse, in one or more variables such as voltage, temperature, or mechanical deformation, which can be detected by sensors or estimated by other techniques. The state of safety definition can be made more general by adding new subfunctions, or by refining the existing ones.

  14. History of Playground Safety in America.

    ERIC Educational Resources Information Center

    Frost, Joe L.

    The history of playground safety standards since the 1890s is reviewed and the lack of improvements in safety made since that time is demonstrated. The first formal effort to develop standards for playground apparatus was made by the National Recreation Association (NRA) in 1929. A major concern in this and a 1938 NRA report was the choice of safe…

  15. 78 FR 35585 - Updating OSHA Standards Based on National Consensus Standards; Signage

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-13

    ...; Signage AGENCY: Occupational Safety and Health Administration (OSHA), Department of Labor. ACTION: Notice... Administration (``OSHA'' or ``the Agency'') proposes to update its general industry and construction signage... standards, ANSI Z53.1-1967, Z35.1-1968, and Z35.2-1968, in its signage standards, thereby providing...

  16. 16 CFR 1105.3 - A more satisfactory standard.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false A more satisfactory standard. 1105.3 Section 1105.3 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS... satisfactory standard. In considering whether a contribution is likely to result in a more satisfactory...

  17. Ground Beef and Food Safety

    MedlinePlus

    ... Forms Standard Forms FSIS United States Department of Agriculture Food Safety and Inspection Service About FSIS District ... must be federally inspected. The U.S. Department of Agriculture's (USDA) Food Safety and Inspection Service (FSIS) carries ...

  18. Proposed English Standards Promote Aviation Safety.

    ERIC Educational Resources Information Center

    Chatham, Robert L.; Thomas, Shelley

    2000-01-01

    Discusses the International Civil Aviation Organization's (ICAO) Air Navigation's Commission approval of a task to develop minimum skill level requirements in English for air traffic control. The ICAO collaborated with the Defense Language Institute English Language Center to propose a minimum standard for English proficiency for international…

  19. 49 CFR 385.103 - Safety monitoring system.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 5 2010-10-01 2010-10-01 false Safety monitoring system. 385.103 Section 385.103... Safety Monitoring System for Mexico-Domiciled Carriers § 385.103 Safety monitoring system. (a) General... Vehicle Safety Standards (FMVSSs), and Hazardous Materials Regulations (HMRs). (b) Roadside monitoring...

  20. 49 CFR 385.103 - Safety monitoring system.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 5 2011-10-01 2011-10-01 false Safety monitoring system. 385.103 Section 385.103... Safety Monitoring System for Mexico-Domiciled Carriers § 385.103 Safety monitoring system. (a) General... Vehicle Safety Standards (FMVSSs), and Hazardous Materials Regulations (HMRs). (b) Roadside monitoring...

Some links on this page may take you to non-federal websites. Their policies may differ from this site.