75 FR 17641 - Updating Fire Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-07

... DEPARTMENT OF VETERANS AFFAIRS 38 CFR Parts 17 and 59 RIN 2900-AN57 Updating Fire Safety Standards... for VA approval of such facilities, including standards for fire safety and heating and cooling... submitted in response to ``RIN 2900-AN57--Updating Fire Safety Standards.'' Copies of comments received will...

Patient Safety Outcomes in Small Urban and Small Rural Hospitals

ERIC Educational Resources Information Center

Vartak, Smruti; Ward, Marcia M.; Vaughn, Thomas E.

2010-01-01

Purpose: To assess patient safety outcomes in small urban and small rural hospitals and to examine the relationship of hospital and patient factors to patient safety outcomes. Methods: The Nationwide Inpatient Sample and American Hospital Association annual survey data were used for analyses. To increase comparability, the study sample was…

29 CFR 1925.2 - Safety and health standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 7 2014-07-01 2014-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH STANDARDS FOR FEDERAL SERVICE CONTRACTS § 1925.2 Safety and health standards...

29 CFR 1925.2 - Safety and health standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 7 2010-07-01 2010-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH STANDARDS FOR FEDERAL SERVICE CONTRACTS § 1925.2 Safety and health standards...

29 CFR 1925.2 - Safety and health standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 7 2012-07-01 2012-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH STANDARDS FOR FEDERAL SERVICE CONTRACTS § 1925.2 Safety and health standards...

29 CFR 1925.2 - Safety and health standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 7 2011-07-01 2011-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH STANDARDS FOR FEDERAL SERVICE CONTRACTS § 1925.2 Safety and health standards...

29 CFR 1925.2 - Safety and health standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 7 2013-07-01 2013-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH STANDARDS FOR FEDERAL SERVICE CONTRACTS § 1925.2 Safety and health standards...

46 CFR 80.25 - Notification of safety standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... standards, except the 1966 fire safety standards. (ii) This vessel complies with international safety standards developed prior to 1960. There is (or, is not) an automatic sprinkler system fitted in the... international safety standard. There is (or, is not) an automatic sprinkler system fitted in the passenger...

46 CFR 80.25 - Notification of safety standards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... standards, except the 1966 fire safety standards. (ii) This vessel complies with international safety standards developed prior to 1960. There is (or, is not) an automatic sprinkler system fitted in the... international safety standard. There is (or, is not) an automatic sprinkler system fitted in the passenger...

46 CFR 80.25 - Notification of safety standards.

Code of Federal Regulations, 2013 CFR

2013-10-01

... standards, except the 1966 fire safety standards. (ii) This vessel complies with international safety standards developed prior to 1960. There is (or, is not) an automatic sprinkler system fitted in the... international safety standard. There is (or, is not) an automatic sprinkler system fitted in the passenger...

46 CFR 80.25 - Notification of safety standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... standards, except the 1966 fire safety standards. (ii) This vessel complies with international safety standards developed prior to 1960. There is (or, is not) an automatic sprinkler system fitted in the... international safety standard. There is (or, is not) an automatic sprinkler system fitted in the passenger...

10 CFR 851.23 - Safety and health standards.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 4 2014-01-01 2014-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

10 CFR 851.23 - Safety and health standards.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 4 2012-01-01 2012-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

10 CFR 851.23 - Safety and health standards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

10 CFR 851.23 - Safety and health standards.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 4 2013-01-01 2013-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

10 CFR 851.23 - Safety and health standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

29 CFR 1924.1 - Applicable safety standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 7 2011-07-01 2011-07-01 false Applicable safety standards. 1924.1 Section 1924.1 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY STANDARDS APPLICABLE TO WORKSHOPS AND REHABILITATION FACILITIES ASSISTED BY GRANTS § 1924...

46 CFR 80.25 - Notification of safety standards.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Notification of safety standards. 80.25 Section 80.25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS DISCLOSURE OF SAFETY STANDARDS AND COUNTRY OF REGISTRY § 80.25 Notification of safety standards. (a) Each owner, operator, agent...

76 FR 70885 - Updating Fire Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-16

... DEPARTMENT OF VETERANS AFFAIRS 38 CFR Part 59 RIN 2900-AN57 Updating Fire Safety Standards AGENCY... Fire Protection Association (NFPA) 101. This rule helps ensure the safety of veterans in the affected... publications are: NFPA 10, Standard for Portable Fire Extinguishers; NFPA 99, Standard for Health Care...

Hazard Analysis and Safety Requirements for Small Drone Operations: To What Extent Do Popular Drones Embed Safety?

PubMed

Plioutsias, Anastasios; Karanikas, Nektarios; Chatzimihailidou, Maria Mikela

2018-03-01

Currently, published risk analyses for drones refer mainly to commercial systems, use data from civil aviation, and are based on probabilistic approaches without suggesting an inclusive list of hazards and respective requirements. Within this context, this article presents: (1) a set of safety requirements generated from the application of the systems theoretic process analysis (STPA) technique on a generic small drone system; (2) a gap analysis between the set of safety requirements and the ones met by 19 popular drone models; (3) the extent of the differences between those models, their manufacturers, and the countries of origin; and (4) the association of drone prices with the extent they meet the requirements derived by STPA. The application of STPA resulted in 70 safety requirements distributed across the authority, manufacturer, end user, or drone automation levels. A gap analysis showed high dissimilarities regarding the extent to which the 19 drones meet the same safety requirements. Statistical results suggested a positive correlation between drone prices and the extent that the 19 drones studied herein met the safety requirements generated by STPA, and significant differences were identified among the manufacturers. This work complements the existing risk assessment frameworks for small drones, and contributes to the establishment of a commonly endorsed international risk analysis framework. Such a framework will support the development of a holistic and methodologically justified standardization scheme for small drone flights. © 2017 Society for Risk Analysis.

Development of a Medication Safety and Quality Survey for Small Rural Hospitals.

PubMed

Winterstein, Almut G; Johns, Thomas E; Campbell, Kyle N; Libby, Joel; Pannell, Bob

2017-12-01

We summarize the development and initial implementation of a survey tool to assess medication safety in small rural hospitals. As part of an ongoing rural hospital medication safety improvement program, we developed a survey tool in all 13 critical access hospitals (CAHs) in Florida. The survey was compiled from existing medication safety assessments and standards, clinical practice guidelines, and published literature. Survey items were selected based on considerations regarding practicality and relevance to the CAH setting.The final survey instrument included 134 items representing 17 medication safety domains. Overall hospital scores ranged from 41% to 95%, with a median of 59%. Most hospitals showed large variation in scores across domains, with 5 hospitals having at least 1 domain with scores less than 10%. Highest scores across all facilities were seen for safety procedures concerning high-alert or look-alike medications and the assembly of emergency carts. The lowest median scores included availability and consistent use of standardized order sets and the effective implementation of medication safety committees. Most hospitals used the survey results to identify and prioritize quality improvement activities. The survey can be used to conduct a short medication safety assessment specific to a limited number of areas and services in CAHs. It showed good ability to discriminate medication safety levels across participating sites and highlighted opportunities for improvement. It may need modification if case mix or services differ in other states or if the status quo of medication safety in CAHs or related standards advance. The described process of survey development might be helpful to support such modifications.

Global standards and local knowledge building: Upgrading small producers in developing countries

PubMed Central

Perez-Aleman, Paola

2012-01-01

Local knowledge building is a crucial factor for upgrading small producers and improving their market competitiveness and livelihoods. The rise of global standards affecting food safety and environmental sustainability in agriculture sparks debates on the impact on smallholders in developing countries. This article presents a perspective on the links of international standards to knowledge and institution building for developing the capabilities of small producers. Interacting with global practices, indigenous private and public actors create local institutions to develop capabilities for product and process innovations that contribute to economic development and enhance food security. Local innovation depends on collective strategic efforts through increasing networks among small producers and other organizations, including firms, nongovernmental organizations, and government, that foster knowledge circulation and bring diverse resources and support to build local capabilities. PMID:21670309

Global standards and local knowledge building: upgrading small producers in developing countries.

PubMed

Perez-Aleman, Paola

2012-07-31

Local knowledge building is a crucial factor for upgrading small producers and improving their market competitiveness and livelihoods. The rise of global standards affecting food safety and environmental sustainability in agriculture sparks debates on the impact on smallholders in developing countries. This article presents a perspective on the links of international standards to knowledge and institution building for developing the capabilities of small producers. Interacting with global practices, indigenous private and public actors create local institutions to develop capabilities for product and process innovations that contribute to economic development and enhance food security. Local innovation depends on collective strategic efforts through increasing networks among small producers and other organizations, including firms, nongovernmental organizations, and government, that foster knowledge circulation and bring diverse resources and support to build local capabilities.

29 CFR 505.6 - Safety and health standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Safety and health standards. 505.6 Section 505.6 Labor... HUMANITIES § 505.6 Safety and health standards. (a) Standards. Section 5(i)(2) and section 7(g)(2) of the Act... dangerous to the health and safety of the employees engaged in such project or production. Compliance with...

29 CFR 505.6 - Safety and health standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 3 2014-07-01 2014-07-01 false Safety and health standards. 505.6 Section 505.6 Labor... HUMANITIES § 505.6 Safety and health standards. (a) Standards. Section 5(i)(2) and section 7(g)(2) of the Act... dangerous to the health and safety of the employees engaged in such project or production. Compliance with...

29 CFR 505.6 - Safety and health standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 3 2011-07-01 2011-07-01 false Safety and health standards. 505.6 Section 505.6 Labor... HUMANITIES § 505.6 Safety and health standards. (a) Standards. Section 5(i)(2) and section 7(g)(2) of the Act... dangerous to the health and safety of the employees engaged in such project or production. Compliance with...

29 CFR 505.6 - Safety and health standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 3 2012-07-01 2012-07-01 false Safety and health standards. 505.6 Section 505.6 Labor... HUMANITIES § 505.6 Safety and health standards. (a) Standards. Section 5(i)(2) and section 7(g)(2) of the Act... dangerous to the health and safety of the employees engaged in such project or production. Compliance with...

29 CFR 505.6 - Safety and health standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 3 2013-07-01 2013-07-01 false Safety and health standards. 505.6 Section 505.6 Labor... HUMANITIES § 505.6 Safety and health standards. (a) Standards. Section 5(i)(2) and section 7(g)(2) of the Act... dangerous to the health and safety of the employees engaged in such project or production. Compliance with...

Alternative Fuels Data Center: Biodiesel Codes, Standards, and Safety

Science.gov Websites

Codes, Standards, and Safety to someone by E-mail Share Alternative Fuels Data Center: Biodiesel Codes, Standards, and Safety on Facebook Tweet about Alternative Fuels Data Center: Biodiesel Codes , Standards, and Safety on Twitter Bookmark Alternative Fuels Data Center: Biodiesel Codes, Standards, and

Findings From the National Machine Guarding Program-A Small Business Intervention: Machine Safety.

PubMed

Parker, David L; Yamin, Samuel C; Xi, Min; Brosseau, Lisa M; Gordon, Robert; Most, Ivan G; Stanley, Rodney

2016-09-01

The purpose of this nationwide intervention was to improve machine safety in small metal fabrication businesses (3 to 150 employees). The failure to implement machine safety programs related to guarding and lockout/tagout (LOTO) are frequent causes of Occupational Safety and Health Administration (OSHA) citations and may result in serious traumatic injury. Insurance safety consultants conducted a standardized evaluation of machine guarding, safety programs, and LOTO. Businesses received a baseline evaluation, two intervention visits, and a 12-month follow-up evaluation. The intervention was completed by 160 businesses. Adding a safety committee was associated with a 10% point increase in business-level machine scores (P < 0.0001) and a 33% point increase in LOTO program scores (P < 0.0001). Insurance safety consultants proved effective at disseminating a machine safety and LOTO intervention via management-employee safety committees.

49 CFR 659.15 - System safety program standard.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false System safety program standard. 659.15 Section 659... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the State Oversight Agency § 659.15 System safety program standard. (a) General requirement. Each state...

Laser safety: regulations, standards, and recommendations

NASA Astrophysics Data System (ADS)

Smalley, Penny J.

1993-07-01

All healthcare professionals involved in the delivery of laser technology to patients, must develop and monitor clinical laser safety programs that ensure compliance with national, state, and local regulations, professional standards of practice, and national consensus standards. Laser safe treatment environments for patients and for personnel can be established and maintained through understanding the impact of both regulatory and advisory guidelines, comprehensive program planning, appropriate continuing education, and routine safety audits.

[Expert investigation on food safety standard system framework construction in China].

PubMed

He, Xiang; Yan, Weixing; Fan, Yongxiang; Zeng, Biao; Peng, Zhen; Sun, Zhenqiu

2013-09-01

Through investigating food safety standard framework among food safety experts, to summarize the basic elements and principles of food safety standard system, and provide policy advices for food safety standards framework. A survey was carried out among 415 experts from government, professional institutions and the food industry/enterprises using the National Food Safety Standard System Construction Consultation Questionnaire designed in the name of the Secretariat of National Food Safety Standard Committee. Experts have different advices in each group about the principles of food product standards, food additive product standards, food related product standards, hygienic practice, test methods. According to the results, the best solution not only may reflect experts awareness of the work of food safety standards situation, but also provide advices for setting and revision of food safety standards for the next. Through experts investigation, the framework and guiding principles of food safety standard had been built.

Findings from the National Machine Guarding Program–A Small Business Intervention: Machine Safety

PubMed Central

Yamin, Samuel C.; Xi, Min; Brosseau, Lisa M.; Gordon, Robert; Most, Ivan G.; Stanley, Rodney

2016-01-01

Objectives The purpose of this nationwide intervention was to improve machine safety in small metal fabrication businesses (3 – 150 employees). The failure to implement machine safety programs related to guarding and lockout/tagout (LOTO) are frequent causes of OSHA citations and may result in serious traumatic injury. Methods Insurance safety consultants conducted a standardized evaluation of machine guarding, safety programs, and LOTO. Businesses received a baseline evaluation, two intervention visits and a twelve-month follow-up evaluation. Results The intervention was completed by 160 businesses. Adding a safety committee was associated with a 10-percentage point increase in business-level machine scores (p< 0.0001) and a 33-percentage point increase in LOTO program scores (p <0.0001). Conclusions Insurance safety consultants proved effective at disseminating a machine safety and LOTO intervention via management-employee safety committees. PMID:26716850

Crashworthiness of Small Poststandard School Buses: Safety Study.

ERIC Educational Resources Information Center

National Transportation Safety Board (DOT), Washington, DC.

In 1977, a series of Federal Motor Vehicle Safety Standards (FMVSS) for school buses became effective, mandating different performance standards for school buses compared to other buses. Because data on the crash performance of school buses built to these standards were lacking, the National Transportation Safety Board conducted a series of…

Small Screen Use and Driving Safety.

PubMed

Atchley, Paul; Strayer, David L

2017-11-01

The increased availability of "small screens," wireless devices with Internet-enabled connections, and their associated applications has almost overnight changed the way that we interact with our phones. The current work outlines some of the aspects of this problem as it relates to the influence of small screens on driving safety. Small screens are highly compelling to drivers, both for the information they convey and because the ability to ignore them while driving is impaired by cognitive resources used by the driving task itself. However, much is unknown about why people make choices to multitask while driving. Given the safety risks, it is recommended that parents, the public, and regulators take a stand against the use of Internet-enabled small screens unrelated to driving when the vehicle is in motion. Copyright © 2017 by the American Academy of Pediatrics.

41 CFR 50-204.2 - General safety and health standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 1 2010-07-01 2010-07-01 true General safety and health... Public Contracts PUBLIC CONTRACTS, DEPARTMENT OF LABOR 204-SAFETY AND HEALTH STANDARDS FOR FEDERAL SUPPLY CONTRACTS General Safety and Health Standards § 50-204.2 General safety and health standards. (a) Every...

12 CFR 228.26 - Small bank performance standards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 3 2011-01-01 2011-01-01 false Small bank performance standards. 228.26... RESERVE SYSTEM COMMUNITY REINVESTMENT (REGULATION BB) Standards for Assessing Performance § 228.26 Small bank performance standards. (a) Performance criteria—(1) Small banks that are not intermediate small...

12 CFR 345.26 - Small bank performance standards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 4 2011-01-01 2011-01-01 false Small bank performance standards. 345.26... GENERAL POLICY COMMUNITY REINVESTMENT Standards for Assessing Performance § 345.26 Small bank performance standards. (a) Performance criteria—(1) Small banks that are not intermediate small banks. The FDIC...

12 CFR 345.26 - Small bank performance standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Small bank performance standards. 345.26... GENERAL POLICY COMMUNITY REINVESTMENT Standards for Assessing Performance § 345.26 Small bank performance standards. (a) Performance criteria—(1) Small banks that are not intermediate small banks. The FDIC...

12 CFR 228.26 - Small bank performance standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 3 2010-01-01 2010-01-01 false Small bank performance standards. 228.26... RESERVE SYSTEM COMMUNITY REINVESTMENT (REGULATION BB) Standards for Assessing Performance § 228.26 Small bank performance standards. (a) Performance criteria—(1) Small banks that are not intermediate small...

76 FR 43743 - Pipeline Safety: Meetings of the Technical Pipeline Safety Standards Committee and the Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-21

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2011-0127] Pipeline Safety: Meetings of the Technical Pipeline Safety Standards Committee and the Technical Hazardous Liquid Pipeline Safety Standards Committee AGENCY: Pipeline and Hazardous Materials...

76 FR 34890 - Track Safety Standards; Concrete Crossties

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-15

...-0007, Notice No. 3] RIN 2130-AC01 Track Safety Standards; Concrete Crossties AGENCY: Federal Railroad... effective concrete crossties, for rail fastening systems connected to concrete crossties, and for automated inspections of track constructed with concrete crossties. The Track Safety Standards were amended via final...

77 FR 52272 - Safety Standard for Play Yards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-29

... Standard for Play Yards AGENCY: Consumer Product Safety Commission. ACTION: Notice of proposed rulemaking... to amend the play yard mandatory standard. This proposed rule would address the hazards associated... Improvement Act of 2008 (CPSIA), also known as the ``Danny Keysar Child Product Safety Notification Act...

41 CFR 50-204.2 - General safety and health standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... health standards. 50-204.2 Section 50-204.2 Public Contracts and Property Management Other Provisions Relating to Public Contracts PUBLIC CONTRACTS, DEPARTMENT OF LABOR 204-SAFETY AND HEALTH STANDARDS FOR FEDERAL SUPPLY CONTRACTS General Safety and Health Standards § 50-204.2 General safety and health...

77 FR 54836 - Federal Motor Vehicle Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-06

... DEPARTMENT OF TRANSPORTATION National Highway Traffic Safety Administration 49 CFR Part 571 Federal Motor Vehicle Safety Standards CFR Correction 0 In Title 49 of the Code of Federal Regulations... read as follows: Sec. 571.119 Standard No. 119; New pneumatic tires for motor vehicles with a GVWR of...

76 FR 22019 - Safety Standard for Toddler Beds

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-20

... warnings should increase consumers' understanding of the connection between the relevant behaviors and... CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Part 1217 RIN 3041-AC79 Safety Standard for Toddler Beds AGENCY: Consumer Product Safety Commission. ACTION: Final rule. SUMMARY: The Consumer Product Safety...

Safety activities in small businesses

PubMed Central

Sinclair, Raymond C.; Cunningham, Thomas R.

2015-01-01

Background Workplace injuries occur at higher rates in smaller firms than in larger firms, and the number of workplace safety activities appear to be inversely associated with those rates. Predictors of safety activities are rarely studied. Methods This study uses data from a national random survey of firms (n = 722) with less than 250 employees conducted in 2002. Results We found that, regardless of firm size or industry, safety activities were more common in 2002 than they were in a similar 1983 study. Having had an OSHA inspection in the last five years and firm size were stronger predictors of safety activities than industry hazardousness and manager’s perceptions of hazardousness. All four variables were significant predictors (β range .19 to .28; R2 = .27). Conclusions Further progress in the prevention of injuries in small firms will require attention to factors likely subsumed within the firm size variable, especially the relative lack of slack resources that might be devoted to safety activities. PMID:26339124

Health and Safety Management for Small-scale Methane Fermentation Facilities

NASA Astrophysics Data System (ADS)

Yamaoka, Masaru; Yuyama, Yoshito; Nakamura, Masato; Oritate, Fumiko

In this study, we considered health and safety management for small-scale methane fermentation facilities that treat 2-5 ton of biomass daily based on several years operation experience with an approximate capacity of 5 t·d-1. We also took account of existing knowledge, related laws and regulations. There are no qualifications or licenses required for management and operation of small-scale methane fermentation facilities, even though rural sewerage facilities with a relative similar function are required to obtain a legitimate license. Therefore, there are wide variations in health and safety consciousness of the operators of small-scale methane fermentation facilities. The industrial safety and health laws are not applied to the operation of small-scale methane fermentation facilities. However, in order to safely operate a small-scale methane fermentation facility, the occupational safety and health management system that the law recommends should be applied. The aims of this paper are to clarify the risk factors in small-scale methane fermentation facilities and encourage planning, design and operation of facilities based on health and safety management.

Effects of organizational safety on employees' proactivity safety behaviors and occupational health and safety management systems in Chinese high-risk small-scale enterprises.

PubMed

Mei, Qiang; Wang, Qiwei; Liu, Suxia; Zhou, Qiaomei; Zhang, Jingjing

2018-06-07

Based on the characteristics of small-scale enterprises, the improvement of occupational health and safety management systems (OHS MS) needs an effective intervention. This study proposed a structural equation model and examined the relationships of perceived organization support for safety (POSS), person-organization safety fit (POSF) and proactivity safety behaviors with safety management, safety procedures and safety hazards identification. Data were collected from 503 employees of 105 Chinese high-risk small-scale enterprises over 6 months. The results showed that both POSS and POSF were positively related to improvement in safety management, safety procedures and safety hazards identification through proactivity safety behaviors. Our findings provide a new perspective on organizational safety for improving OHS MS for small-scale enterprises and extend the application of proactivity safety behaviors.

77 FR 72702 - Small Business Size Standards: Information

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-06

... SMALL BUSINESS ADMINISTRATION 13 CFR Part 121 RIN 3245-AG26 Small Business Size Standards: Information AGENCY: U.S. Small Business Administration. ACTION: Final rule. SUMMARY: The United States Small Business Administration (SBA) is increasing the receipts based small business size standards for 15...

International Safety Regulation and Standards for Space Travel and Commerce

NASA Astrophysics Data System (ADS)

Pelton, J. N.; Jakhu, R.

The evolution of air travel has led to the adoption of the 1944 Chicago Convention that created the International Civil Aviation Organization (ICAO), headquartered in Montreal, Canada, and the propagation of aviation safety standards. Today, ICAO standardizes and harmonizes commercial air safety worldwide. Space travel and space safety are still at an early stage of development, and the adoption of international space safety standards and regulation still remains largely at the national level. This paper explores the international treaties and conventions that govern space travel, applications and exploration today and analyzes current efforts to create space safety standards and regulations at the national, regional and global level. Recent efforts to create a commercial space travel industry and to license commercial space ports are foreseen as means to hasten a space safety regulatory process.

12 CFR 25.26 - Small bank performance standards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 1 2011-01-01 2011-01-01 false Small bank performance standards. 25.26 Section... REINVESTMENT ACT AND INTERSTATE DEPOSIT PRODUCTION REGULATIONS Regulations Standards for Assessing Performance § 25.26 Small bank performance standards. (a) Performance criteria—(1) Small banks that are not...

12 CFR 25.26 - Small bank performance standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Small bank performance standards. 25.26 Section... REINVESTMENT ACT AND INTERSTATE DEPOSIT PRODUCTION REGULATIONS Regulations Standards for Assessing Performance § 25.26 Small bank performance standards. (a) Performance criteria—(1) Small banks that are not...

Suborbital Safety Technical Committee- Summary of Proposed Standards & Guidelines

NASA Astrophysics Data System (ADS)

Quinn, Andy; Atencia Yepez, Amaya; Klicker, Michael; Howard, Diane; Verstraeten, Joram; Other Suborbital Safety TC Members

2013-09-01

There are currently no international safety standards and guidelines to assist designers, operators and authorities in the suborbital domain. There is a launch licensing regime in the United States (US) to assist the forerunners of the suborbital domain however this does not provide a safety approval for the vehicle against set standards or does not have an acceptable level of safety to achieve in terms of design or operation. In Europe a certification framework may be implemented however this (or any regulatory framework) is not in place as yet. This paper summarises the 5 tasks thus far completed by the International Association for the Advancement of Space Safety (IAASS) Suborbital Safety Technical Committee (SS TC) in terms of deriving standards and guidelines for the suborbital domain. The SS TC comprises members from the suborbital industry (US and European vehicle designers), safety experts, legal experts, medical/training experts, prospective spaceport operators and members from the US and European authorities (though these members cannot directly steer the standards and guidelines - they can merely review them for interest and comment on non-policy aspects). The SS TC has been divided into three working groups (WG): Regulatory WG, Technical WG and Operations WG. The 5 tasks that are summarised in this paper include: Regulatory WG - (Task 1) Clarify and promote regulatory framework for suborbital flights (including discussions on Space Law 'v' Air Law for suborbital domain); Technical WG - (Task 1) Defining & Alignment (globally) of Safety Criteria for Suborbital domain using industry best practices, (Task 2) Software/complex hardware certification for suborbital flights; Operations WG - (Task 1) Flight Crew and Spaceflight Participant Medical and Training Standards & Guidelines for suborbital flight, (Task 2) Spaceport Safety Management System. This paper also details the next set of standards and guidelines that will be derived by the SS TC. The paper

Assessment of Safety Standards for Automotive Electronic Control Systems

DOT National Transportation Integrated Search

2016-06-01

This report summarizes the results of a study that assessed and compared six industry and government safety standards relevant to the safety and reliability of automotive electronic control systems. These standards include ISO 26262 (Road Vehicles - ...

Vehicle track interaction safety standards

DOT National Transportation Integrated Search

2014-04-02

Vehicle/Track Interaction (VTI) Safety Standards aim to : reduce the risk of derailments and other accidents attributable : to the dynamic interaction between moving vehicles and the : track over which they operate. On March 13, 2013, the Federal : R...

78 FR 37706 - Safety Standards for Infant Walkers and Infant Swings

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-24

... Danny Keysar Child Product Safety Notification Act, if ASTM revises the underlying voluntary standard... CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Parts 1216 and 1223 Safety Standards for Infant Walkers... the Danny Keysar Child Product Safety Notification Act, the U.S. Consumer Product Safety Commission...

Improving compliance with Occupational Safety and Health Administration standards.

PubMed

Cuming, Richard; Rocco, Tonette S; McEachern, Adriana G

2008-02-01

Health care facilities can be dangerous places. The mission of the Occupational Safety and Health Administration (OSHA) is to improve the safety of the American workplace by developing and implementing standards that prevent occupational injury, illness, and death. Perioperative services are performed in environments where exposure to bloodborne pathogens is a daily occurrence, making implementation and compliance with OSHA standards very important. Employees and employers must remain current with workplace safety requirements, including use of personal protective equipment. This article presents implications of the OSHA standards for employers, educators, and employees.

Performance and evaluation of small construction safety training simulations.

PubMed

Wojcik, S M; Kidd, P S; Parshall, M B; Struttmann, T W

2003-06-01

Back- and fall-related injuries occur frequently in construction and are costly in terms of workers' compensation claims and lost productivity. Interventions are needed that address the susceptibility to these injuries. The purpose of this study was to develop and test a safety training intervention for small construction companies (standard deviation (SD) = 8.9, n = 143] for three back simulations and 85.2% (SD = 8.9, n = 159) for three fall-related simulations. Mean total evaluation scores (percentage of maximum) were 83.1% (SD = 11.6) and 85.5% (SD = 11.7) for the back and fall simulations, respectively. Quality and realism evaluation scores were significantly higher than scores for applicability to work. Simulations were well received as safety training exercises. Given the heterogeneous work classifications found in small construction companies, it may be preferable to target safety intervention content to specific trades rather than aim for generality across trades.

Cultivating quality: implementing standardized reporting and safety checklists.

PubMed

Stevens, James D; Bader, Mary Kay; Luna, Michele A; Johnson, Linda M

2011-05-01

Developing processes to create a culture of safety. It's estimated that as many as 98,000 hospitalized patients lose their lives each year in the United States because of medical errors that could have been prevented. While standardized reporting and safety checklists have been shown to improve communication and patient safety, implementation of these tools in hospitals remains challenging. To implement standardized nurse-to-nurse reporting along with safety checklists at Mission Hospital, a 522-bed facility in Mission Viejo, California, using Lewin's change theory and Knowles's adult learning theory. Nurses were tested to assess their knowledge of the standardized nurse-to-physician reporting method called SBAR (Situation, Background, Assessment, Recommendation), their understanding of the concept of the nurse-to-nurse reporting method called SBAP (Situation, Background, Assessment, Plan), and the use of safety checklists. Then, after viewing a 22-minute educational video, they were retested. A total of 482 nurses completed the pretest and posttest. On the pretest, the nurses' mean score was 15.935 points (SD, 3.529) out of 20. On the posttest, the mean score was 18.94 (SD, 1.53) out of 20. A Wilcoxon matched-pairs signed-rank test was performed; the two-tailed P value was < 0.001. The application of Lewin's change theory and Knowles's adult learning theory was successful in the process of implementing standardized nurse-to-nurse reporting and safety checklists at Mission Hospital.

45 CFR 156.1110 - Establishment of patient safety standards for QHP issuers.

Code of Federal Regulations, 2014 CFR

2014-10-01

... STANDARDS RELATED TO EXCHANGES Quality Standards § 156.1110 Establishment of patient safety standards for QHP issuers. (a) Patient safety standards. A QHP issuer that contracts with a hospital with greater... 45 Public Welfare 1 2014-10-01 2014-10-01 false Establishment of patient safety standards for QHP...

78 FR 9623 - Federal Motor Vehicle Safety Standards; Air Brake Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-11

... [Docket No. NHTSA-2013-0011] RIN 2127-AL11 Federal Motor Vehicle Safety Standards; Air Brake Systems... rule that amended the Federal motor vehicle safety standard for air brake systems by requiring... published a final rule in the Federal Register amending Federal Motor Vehicle Safety Standard (FMVSS) No...

OSHA Laboratory Standard: Driving Force for Laboratory Safety!

ERIC Educational Resources Information Center

Roy, Kenneth R.

2000-01-01

Discusses the Occupational Safety and Health Administration's (OSHA's) Laboratory Safety Standards as the major driving force in establishing and maintaining a safe working environment for teachers and students. (Author)

Securing Safety - Spaceflight Standards for the Mass Market

NASA Astrophysics Data System (ADS)

Goh, G.

The projected total revenue of the space tourism industry is expected to exceed USD $1 billion by 2021. The vast economic potential of space tourism has fuelled ambitious plans for commercial orbital and suborbital flights, in addition to longer- duration spaceflights on board the International Space Station (ISS) and other planned orbiting habitats. International and national legal frameworks are challenged to provide regulations to ensure minimum standards of spaceflight safety for a high risk activity that aims to enter the mainstream tourism market. Thrown into the mix are various considerations of the number of spaceflight participants per flight, the economic viability of stringent safety standards, the plethora of possible flight vehicles and the compensation mechanism in case of violations of safety regulations. This paper surveys the legal challenges in the regulation of safety in commercial manned spaceflight, including issues of jurisdiction, authorization, licensing and liability. Drawing on analogous developments in other fields of law related to international carriage, a safety regulation framework with minimum international standards is proposed. This proposed framework considers both accident avoidance and emergency response in light of international legal, policy and economic perspectives.

77 FR 39442 - Receipts-Based, Small Business Size Standard

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-03

... RIN 3150-AJ14 [NRC-2012-0062] Receipts-Based, Small Business Size Standard AGENCY: Nuclear Regulatory... business size standard from $6.5 million to $7 million to conform to the standard set by the Small Business... updating the receipts-based, small business size standard from $6.5 million to $7.0 million. Adequate...

Opinions on Fresh Produce Food Safety and Quality Standards by Fresh Produce Supply Chain Experts from the Global South and North.

PubMed

Jacxsens, Liesbeth; Van Boxstael, Sigrid; Nanyunja, Jessica; Jordaan, Danie; Luning, Pieternel; Uyttendaele, Mieke

2015-10-01

This study describes the results of an on-line survey of fresh produce supply chain experts who work with producers from the Global North (n = 41, 20 countries) and the Global South (n = 63, 29 countries). They expressed their opinion using 1 to 5 Likert scales on several items related to four types of food safety and quality standards and legislation: Codex Alimentarius standards, European Union legislation, national legislation, and private standards. The results reflect the different circumstances under which the Southern and Northern producers operate in relation to the local organization, regulation, and support of the sector; but they also indicate similar challenges, in particular, the challenge of private standards, which were perceived to demand a higher implementation effort than the other three types of standards. Private standards were also strongly perceived to exclude Southern and Northern small- and medium-scale producers from high-value markets, whereas European Union legislation was perceived to strongly exclude, in particular, small- and medium-scale Southern producers. The results further highlight concerns about costly control measures and third-party certification that are required by downstream buyers but that are mostly paid for by upstream suppliers. Food standards are seen in their dual role as a catalyst for implementation of structured food safety management systems on the one hand and as a nontariff barrier to trade on the other hand. The results of the survey also pointed up the advantages of enforcing food safety and food quality standards in terms of knowledge spillover to noncertified activities, increased revenues, and improved food safety of delivered produce. Survey results highlight the importance of technical assistance and support of producers by governments and producer cooperatives or trade associations in the implementation and certification of food standards, along with increased awareness of and training of individuals in

49 CFR 659.15 - System safety program standard.

Code of Federal Regulations, 2011 CFR

2011-10-01

... included in the affected rail transit agency's system safety program plan relating to the hazard management... 49 Transportation 7 2011-10-01 2011-10-01 false System safety program standard. 659.15 Section 659... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the...

NREL Provides First-of-its-Kind Guidance Promoting Safety Standards for

Science.gov Websites

Promoting Safety Standards for Natural Gas Vehicle Maintenance Facilities NREL Provides First-of-its-Kind Guidance Promoting Safety Standards for Natural Gas Vehicle Maintenance Facilities December 1, 2017 The U.S vehicle maintenance facilities with a new handbook and webinar that outline safety factors and standards

Standard Deviation for Small Samples

ERIC Educational Resources Information Center

Joarder, Anwar H.; Latif, Raja M.

2006-01-01

Neater representations for variance are given for small sample sizes, especially for 3 and 4. With these representations, variance can be calculated without a calculator if sample sizes are small and observations are integers, and an upper bound for the standard deviation is immediate. Accessible proofs of lower and upper bounds are presented for…

Test Operations Procedure (TOP) 03-2-504A Safety Evaluation of Small Arms and Medium Caliber Weapons

DTIC Science & Technology

2013-05-29

Assessment HHAR Health Hazard Assessment Report HERO Hazards of Electromagnetic Radiation to Ordnance in. inch J Joule km/hr kilometers per hour...help standardize testing and to specify tests commonly used to identify and assess safety hazards associated with the use of small arms. The...19b. TELEPHONE NUMBER (include area code) Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std. Z39-18

75 FR 61597 - Small Business Size Standards: Retail Trade

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-06

... SMALL BUSINESS ADMINISTRATION 13 CFR Part 121 RIN 3245-AF69 Small Business Size Standards: Retail Trade AGENCY: U.S. Small Business Administration. ACTION: Final rule. SUMMARY: The United States Small Business Administration (SBA) is modifying 47 small business size standards for industries in North...

75 FR 61591 - Small Business Size Standards; Other Services.

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-06

... SMALL BUSINESS ADMINISTRATION 13 CFR Part 121 RIN 3245-AF70 Small Business Size Standards; Other Services. AGENCY: U.S. Small Business Administration. ACTION: Final rule. SUMMARY: The United States Small Business Administration (SBA) is increasing the small business size standards for 18 industries in North...

Standardized Curriculum for Small Engine Repair.

ERIC Educational Resources Information Center

Mississippi State Dept. of Education, Jackson. Office of Vocational, Technical and Adult Education.

This curriculum guide for small engine repair was developed by the state of Mississippi to standardize vocational education course titles and core contents. The objectives contained in this document are common to all small engine repair programs in the state. The guide contains objectives for small engine repair I and II courses. Units in course I…

50 CFR 600.355 - National Standard 10-Safety of Life at Sea.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 50 Wildlife and Fisheries 8 2010-10-01 2010-10-01 false National Standard 10-Safety of Life at Sea... Standards § 600.355 National Standard 10—Safety of Life at Sea. (a) Standard 10. Conservation and management measures shall, to the extent practicable, promote the safety of human life at sea. (b) General. (1...

Additional nuclear criticality safety calculations for small-diameter containers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hone, M.J.

This report documents additional criticality safety analysis calculations for small diameter containers, which were originally documented in Reference 1. The results in Reference 1 indicated that some of the small diameter containers did not meet the criteria established for criticality safety at the Portsmouth facility (K{sub eff} +2{sigma}<.95) when modeled under various contingency assumptions of reflection and moderation. The calculations performed in this report reexamine those cases which did not meet the criticality safety criteria. In some cases, unnecessary conservatism is removed, and in other cases mass or assay limits are established for use with the respective containers.

Improving safety in small enterprises through an integrated safety management intervention.

PubMed

Kines, Pete; Andersen, Dorte; Andersen, Lars Peter; Nielsen, Kent; Pedersen, Louise

2013-02-01

This study tests the applicability of a participatory behavior-based injury prevention approach integrated with safety culture initiatives. Sixteen small metal industry enterprises (10-19 employees) are randomly assigned to receive the intervention or not. Safety coaching of owners/managers result in the identification of 48 safety tasks, 85% of which are solved at follow-up. Owner/manager led constructive dialogue meetings with workers result in the prioritization of 29 tasks, 79% of which are accomplished at follow-up. Intervention enterprises have significant increases on six of eight safety-perception-survey factors, while comparisons increase on only one factor. Both intervention and comparison enterprises demonstrate significant increases in their safety observation scores. Interview data validate and supplement these results, providing some evidence for behavior change and the initiation of safety culture change. Given that over 95% of enterprises in most countries have less than 20 employees, there is great potential for adapting this integrated approach to other industries. Copyright © 2012 National Safety Council and Elsevier Ltd. All rights reserved.

12 CFR 563e.26 - Small savings association performance standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Small savings association performance standards... COMMUNITY REINVESTMENT Standards for Assessing Performance § 563e.26 Small savings association performance standards. (a) Performance criteria—(1) Small savings associations that are not intermediate small savings...

12 CFR 563e.26 - Small savings association performance standards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 5 2011-01-01 2011-01-01 false Small savings association performance standards... COMMUNITY REINVESTMENT Standards for Assessing Performance § 563e.26 Small savings association performance standards. (a) Performance criteria—(1) Small savings associations that are not intermediate small savings...

Critical Review of Commercial Secondary Lithium-Ion Battery Safety Standards

NASA Astrophysics Data System (ADS)

Jones, Harry P.; Chapin, Thomas, J.; Tabaddor, Mahmod

2010-09-01

The development of Li-ion cells with greater energy density has lead to safety concerns that must be carefully assessed as Li-ion cells power a wide range of products from consumer electronics to electric vehicles to space applications. Documented field failures and product recalls for Li-ion cells, mostly for consumer electronic products, highlight the risk of fire, smoke, and even explosion. These failures have been attributed to the occurrence of internal short circuits and the subsequent thermal runaway that can lead to fire and explosion. As packaging for some applications include a large number of cells, the risk of failure is likely to be magnified. To address concerns about the safety of battery powered products, safety standards have been developed. This paper provides a review of various international safety standards specific to lithium-ion cells. This paper shows that though the standards are harmonized on a host of abuse conditions, most lack a test simulating internal short circuits. This paper describes some efforts to introduce internal short circuit tests into safety standards.

16 CFR 1115.8 - Compliance with product safety standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... applicable mandatory consumer product safety standards and to report to the Commission any products which do.... 1115.8 Section 1115.8 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SUBSTANTIAL PRODUCT HAZARD REPORTS General Interpretation § 1115.8 Compliance with...

77 FR 39385 - Receipts-Based, Small Business Size Standard

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-03

... Business Size Standard AGENCY: Nuclear Regulatory Commission. ACTION: Direct final rule. SUMMARY: The U.S.... The NRC is increasing its receipts-based, small business size standard from $6.5 million to $7 million to conform to the standard set by the Small Business Administration (SBA). This size standard...

Variation of methods in small-scale safety and thermal testing of improvised explosives

DOE PAGES

Sandstrom, Mary M.; Brown, Geoffrey W.; Preston, Daniel N.; ...

2014-09-29

Here, one of the first steps in establishing safe handling procedures for explosives is small-scale safety and thermal (SSST) testing. To better understand the response of homemade or improvised explosives (HMEs) to SSST testing, 16 HME materials were compared to 3 standard military explosives in a proficiency-type round robin study among five laboratories, two U.S. Department of Defense and three U.S. Department of Energy, sponsored by the Department of Homeland Security, Science & Technology Directorate, Explosives Division.

30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

34 CFR 75.609 - Comply with safety and health standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 34 Education 1 2014-07-01 2014-07-01 false Comply with safety and health standards. 75.609 Section 75.609 Education Office of the Secretary, Department of Education DIRECT GRANT PROGRAMS What Conditions Must Be Met by a Grantee? Construction § 75.609 Comply with safety and health standards. In...

[Comparison of the Efficacy and Safety of Icotinib with Standard Second-line 
Chemotherapy in Previously Treated Advanced Non-small Cell Lung Cancer].

PubMed

Yao, Shuyang; Qian, Kun; Wang, Ruotian; Li, Yuanbo; Zhang, Yi

2015-06-01

This study compared the efficacy and safety of icotinib with standard second-line chemotherapy (single-agent docetaxel or pemetrexed) in previously treated advanced non-small cell lung cancer (NSCLC). Thirty-two consecutive patients treated with icotinib and 33 consecutive patients treated with standard second-line chemotherapy in Xuanwu Hospital from January 2012 to July 2013 were enrolled in our retrospective research. The Response Evaluation Criteria in Solid Tumors were used to evaluate the tumor responses, and the progression-free survival (PFS) was evaluated by Kaplan-Meier method. Icotinib was comparable with standard second-line chemotherapy for advanced NSCLC in terms of overall response rate (ORR) (28.1% vs 18.2%, P=0.341), disease control rate (DFS)(43.8% vs 45.5%, P=0.890), and PFS (4.3 months vs 3.8 months, P=0.506). In the icotinib group, the ORR of epidermal growth factor receptor (EGFR) mutant was significantly higher than that of EGFR unknown or wild type (P=0.017). In multivariate analysis, age, gender, histology, and the optimum first-line treatment response were dependent prognostic factors based on the PFS of the icotinib group. The incidence of adverse events was significantly fewer in the icotinib group than in the chemotherapy group (P=0.001). Compared with the standard second-line chemotherapy, icotinib is active in the treatment of advanced NSCLC patients, especially with EGFR unknown in the second line, with an acceptable adverse event profile.

41 CFR 128-1.8005 - Seismic safety standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Seismic safety standards. 128-1.8005 Section 128-1.8005 Public Contracts and Property Management Federal Property Management Regulations System (Continued) DEPARTMENT OF JUSTICE 1-INTRODUCTION 1.80-Seismic Safety Program § 128-1.8005...

Consumer Product Safety Commission. Consumer Education Efforts for Revised Children's Sleepwear Safety Standard.

ERIC Educational Resources Information Center

General Accounting Office, Washington, DC. Health, Education, and Human Services Div.

A study examined the type and extent of consumer education that occurred since the Consumer Product Safety Commission (CPSC) amended the 1972 federal safety standards (effective January 1997) to permit marketing of snug-fitting, nonflame-resistant cotton garments as sleepwear. Three voluntary point-of-sale (POS) practices recognized as important…

Connoted hazard and perceived importance of fluorescent, neon, and standard safety colors.

PubMed

Zielinska, O A; Mayhorn, C B; Wogalter, M S

2017-11-01

The perceived hazard and rated importance of standard safety, fluorescent, and neon colors are investigated. Colors are used in warnings to enhance hazard communication. Red has consistently been rated as the highest in perceived hazard. Orange, yellow, and black are the next highest in connoted hazard; however, there is discrepancy in their ordering. Safety standards, such as ANSI Z535.1, also list colors to convey important information, but little research has examined the perceived importance of colors. In addition to standard safety colors, fluorescent colors are more commonly used in warnings. Understanding hazard and importance perceptions of standard safety and fluorescent colors is necessary to create effective warnings. Ninety participants rated and ranked a total of 33 colors on both perceived hazard and perceived importance. Rated highest were the safety red colors from the American National Standard Institute (ANSI), International Organization for Standardization (ISO), and Federal Highway Administration (FHWA) together with three fluorescent colors (orange, yellow, and yellow-green) from 3 M on both dimensions. Rankings were similar to ratings except that fluorescent orange was the highest on perceived hazard, while fluorescent orange and safety red from the ANSI were ranked as the highest in perceived importance. Fluorescent colors convey hazard and importance levels as high as the standard safety red colors. Implications for conveying hazard and importance in warnings through color are discussed. Copyright © 2017 Elsevier Ltd. All rights reserved.

Statistical analysis of an inter-laboratory comparison of small-scale safety and thermal testing of RDX

DOE PAGES

Brown, Geoffrey W.; Sandstrom, Mary M.; Preston, Daniel N.; ...

2014-11-17

In this study, the Integrated Data Collection Analysis (IDCA) program has conducted a proficiency test for small-scale safety and thermal (SSST) testing of homemade explosives (HMEs). Described here are statistical analyses of the results from this test for impact, friction, electrostatic discharge, and differential scanning calorimetry analysis of the RDX Class 5 Type II standard. The material was tested as a well-characterized standard several times during the proficiency test to assess differences among participants and the range of results that may arise for well-behaved explosive materials.

30 CFR 6.30 - MSHA listing of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false MSHA listing of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.30 MSHA listing of equivalent non-MSHA product safety standards. MSHA evaluated the following non-MSHA product safety standards and determined that they provide...

30 CFR 6.30 - MSHA listing of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false MSHA listing of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.30 MSHA listing of equivalent non-MSHA product safety standards. MSHA evaluated the following non-MSHA product safety standards and determined that they provide...

30 CFR 6.30 - MSHA listing of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false MSHA listing of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.30 MSHA listing of equivalent non-MSHA product safety standards. MSHA evaluated the following non-MSHA product safety standards and determined that they provide...

30 CFR 6.30 - MSHA listing of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false MSHA listing of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.30 MSHA listing of equivalent non-MSHA product safety standards. MSHA evaluated the following non-MSHA product safety standards and determined that they provide...

30 CFR 6.30 - MSHA listing of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false MSHA listing of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.30 MSHA listing of equivalent non-MSHA product safety standards. MSHA evaluated the following non-MSHA product safety standards and determined that they provide...

19 CFR 12.85 - Coast Guard boat and associated equipment safety standards.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Coast Guard boat and associated equipment safety... SECURITY; DEPARTMENT OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Safety Standards for Boats and Associated Equipment § 12.85 Coast Guard boat and associated equipment safety standards. (a) Applicability of...

19 CFR 12.85 - Coast Guard boat and associated equipment safety standards.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Coast Guard boat and associated equipment safety... SECURITY; DEPARTMENT OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Safety Standards for Boats and Associated Equipment § 12.85 Coast Guard boat and associated equipment safety standards. (a) Applicability of...

19 CFR 12.85 - Coast Guard boat and associated equipment safety standards.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Coast Guard boat and associated equipment safety... SECURITY; DEPARTMENT OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Safety Standards for Boats and Associated Equipment § 12.85 Coast Guard boat and associated equipment safety standards. (a) Applicability of...

19 CFR 12.85 - Coast Guard boat and associated equipment safety standards.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Coast Guard boat and associated equipment safety... SECURITY; DEPARTMENT OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Safety Standards for Boats and Associated Equipment § 12.85 Coast Guard boat and associated equipment safety standards. (a) Applicability of...

19 CFR 12.85 - Coast Guard boat and associated equipment safety standards.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Coast Guard boat and associated equipment safety... SECURITY; DEPARTMENT OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Safety Standards for Boats and Associated Equipment § 12.85 Coast Guard boat and associated equipment safety standards. (a) Applicability of...

Safety Assessment of Multi Purpose Small Payload Rack(MSPR)

NASA Astrophysics Data System (ADS)

Mizutani, Yoshinobu; Takada, Satomi; Murata, Kosei; Ozawa, Daisaku; Kobayashi, Ryoji; Nakamura, Yasuhiro

2010-09-01

We are reporting summary of preliminary safety assessment for Multi Purpose Small Payload Rack(MSPR), which is one of the micro gravity experiment facilities that are being developed for the 2nd phase JEM utilization(JEM: Japanese Experiment Module) that will be launched on H-II Transfer Vehicle(HTV) 2nd flight in 2011. MSPR is used for multi-purpose micro-g experiment providing experimental spaces and work stations. MSPR has three experimental spaces; first, there is a space called Work Volume(WV) with capacity volume of approximately 350 litters, in which multiple resources including electricity, communication, and moving image functions can be used. Within this space, installation of devices can be done by simple, prompt attachment by Velcro and pins with high degree of flexibility. Second, there is Small Experiment Area(SEA), with capacity volume of approximately 70 litters, in which electricity, communication, and moving image functions can also be used in the same way as WV. These spaces protect experiment devices and specimens from contingent loads by the crewmembers. Third, there is Work Bench with area of 0.5 square meters, on which can be used for maintenance, inspection and data operations of installed devices, etc. This bench can be stored in the rack during contingency. Chamber for Combustion Experiment(CCE) that is planned to be installed in WV is a pressure-resistant experimental container that can be used to seal hazardous materials from combustion experiments. This CCE has double sealing design in chamber itself, which resist gas leakage under normal the temperature and pressure. Electricity, communication, moving image function can be used in the same way as WV. JAXA Phase 2 Safety Review Panel(SRP) has been held in April, 2010. For safety analysis of MSPR, hazards were identified based on Fault Tree Analysis methodology and then these hazards were classified into either eight ISS standard-type hazards or eight unique-type hazards that requires

76 FR 55825 - Federal Motor Vehicle Safety Standards, Child Restraint Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-09

... [Docket No. NHTSA-2011-0139] RIN 2127-AJ44 Federal Motor Vehicle Safety Standards, Child Restraint Systems..., amends a provision in Federal Motor Vehicle Safety Standard No. 213, ``Child restraint systems,'' that... forces, accelerations, moments and deflections, which are crucial in evaluating vehicle occupant...

75 FR 15620 - Federal Motor Vehicle Safety Standards; Air Brake Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-30

... fully develop improved brake systems and also to ensure vehicle control and stability while braking... [Docket No. NHTSA 2009-0175] RIN 2127-AK62 Federal Motor Vehicle Safety Standards; Air Brake Systems... Federal motor vehicle safety standard for air brake systems by requiring substantial improvements in...

An investigation and analysis of safety issues in Polish small construction plants.

PubMed

Dąbrowski, Andrzej

2015-01-01

The construction industry is a booming sector of the Polish economy; however, it is stigmatised by a lower classification due to high occupational risks and an unsatisfactory state of occupational safety. Safety on construction sites is compromised by small construction firms which dominate the market and have high accident rates. This article presents the results of studies (using a checklist) conducted in small Polish construction companies in terms of selected aspects of safety, such as co-operation with the general contractor, occupational health and safety documents, occupational risk assessment, organization of work, protective gear and general work equipment. The mentioned studies and analyses provided the grounds to establish the main directions of preventive measures decreasing occupational risk in small construction companies, e.g., an increase in engagement of investors and general contractors, improvement of occupational health and safety (OSH) documents, an increase in efficiency of construction site managers, better stability of employment and removal of opposing objectives between economic strategy and work safety.

An investigation and analysis of safety issues in Polish small construction plants

PubMed Central

Dąbrowski, Andrzej

2015-01-01

The construction industry is a booming sector of the Polish economy; however, it is stigmatised by a lower classification due to high occupational risks and an unsatisfactory state of occupational safety. Safety on construction sites is compromised by small construction firms which dominate the market and have high accident rates. This article presents the results of studies (using a checklist) conducted in small Polish construction companies in terms of selected aspects of safety, such as co-operation with the general contractor, occupational health and safety documents, occupational risk assessment, organization of work, protective gear and general work equipment. The mentioned studies and analyses provided the grounds to establish the main directions of preventive measures decreasing occupational risk in small construction companies, e.g., an increase in engagement of investors and general contractors, improvement of occupational health and safety (OSH) documents, an increase in efficiency of construction site managers, better stability of employment and removal of opposing objectives between economic strategy and work safety. PMID:26694002

New conducted electrical weapons: Electrical safety relative to relevant standards.

PubMed

Panescu, Dorin; Nerheim, Max; Kroll, Mark W; Brave, Michael A

2017-07-01

We have previously published about TASER ® conducted electrical weapons (CEW) compliance with international standards. CEWs deliver electrical pulses that can inhibit a person's neuromuscular control or temporarily incapacitate. An eXperimental Rotating-Field (XRF) waveform CEW and the X2 CEW are new 2-shot electrical weapon models designed to target a precise amount of delivered charge per pulse. They both can deploy 1 or 2 dart pairs, delivered by 2 separate cartridges. Additionally, the XRF controls delivery of incapacitating pulses over 4 field vectors, in a rotating sequence. As in our previous study, we were motivated by the need to understand the cardiac safety profile of these new CEWs. The goal of this paper is to analyze the nominal electrical outputs of TASER XRF and X2 CEWs in reference to provisions of all relevant international standards that specify safety requirements for electrical medical devices and electrical fences. Although these standards do not specifically mention CEWs, they are the closest electrical safety standards and hence give very relevant guidance. The outputs of several TASER XRF and X2 CEWs were measured under normal operating conditions. The measurements were compared against manufacturer specifications. CEWs electrical output parameters were reviewed against relevant safety requirements of UL 69, IEC 60335-2-76 Ed 2.1, IEC 60479-1, IEC 60479-2, AS/NZS 60479.1, AS/NZS 60479.2, IEC 60601-1 and BS EN 60601-1. Our study confirmed that the nominal electrical outputs of TASER XRF and X2 CEWs lie within safety bounds specified by relevant standards.

ASME Nuclear Crane Standards for Enhanced Crane Safety and Increased Profit

NASA Astrophysics Data System (ADS)

Parkhurst, Stephen N.

2000-01-01

The ASME NOG-1 standard, 'Rules for Construction of Overhead and Gantry Cranes', covers top running cranes for nuclear facilities; with the ASME NUM-1 standard, 'Rules for Construction of Cranes, Monorails, and Hoists', covering the single girder, underhung, wall and jib cranes, as well as the monorails and hoists. These two ASME nuclear crane standards provide criteria for designing, inspecting and testing overhead handling equipment with enhanced safety to meet the 'defense-in-depth' approach of the United States Nuclear Regulatory Commission (USNRC) documents NUREG 0554 and NUREG 0612. In addition to providing designs for enhanced safety, the ASME nuclear crane standards provide a basis for purchasing overhead handling equipment with standard safety features, based upon accepted engineering principles, and including performance and environmental parameters specific to nuclear facilities. The ASME NOG-1 and ASME NUM-1 standards not only provide enhanced safety for handling a critical load, but also increase profit by minimizing the possibility of load drops, by reducing cumbersome operating restrictions, and by providing the foundation for a sound licensing position. The ASME nuclear crane standards can also increase profit by providing the designs and information to help ensure that the right standard equipment is purchased. Additionally, the ASME nuclear crane standards can increase profit by providing designs and information to help address current issues, such as the qualification of nuclear plant cranes for making 'planned engineered lifts' for steam generator replacement and decommissioning.

76 FR 57635 - Restrictions on Operators Employing Former Flight Standards Service Aviation Safety Inspectors...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-16

... Standards Service Aviation Safety Inspectors; Correction AGENCY: Federal Aviation Administration (FAA), DOT... ``Restrictions on Operators Employing Former Flight Standards Service Aviation Safety Inspectors'' (76 FR 52231... of, a Flight Standards Service Aviation Safety Inspector, and had direct responsibility to inspect...

76 FR 44829 - Federal Motor Vehicle Safety Standards; Air Brake Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-27

... [Docket No. NHTSA-2009-0175] RIN 2127-AK84 Federal Motor Vehicle Safety Standards; Air Brake Systems... final rule that amended the Federal motor vehicle safety standard for air brake systems by requiring... July 27, 2009, NHTSA published a final rule in the Federal Register amending Federal Motor Vehicle...

50 CFR 600.355 - National Standard 10-Safety of Life at Sea.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Sea. 600.355 Section 600.355 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL... Standards § 600.355 National Standard 10—Safety of Life at Sea. (a) Standard 10. Conservation and management measures shall, to the extent practicable, promote the safety of human life at sea. (b) General. (1...

Safety Standards Plan for Middlesex County Vocational & Technical High Schools.

ERIC Educational Resources Information Center

Sommer, Cy

This vocational education safety standards plan outlines rules and regulations adopted by the Board of Education of Middlesex County Vocational and Technical High Schools. The first of eleven chapters presents demographics and a safety organization table for Middlesex County Vocational and Technical Schools. In chapter 2, six safety program…

Health and Safety Checklist for Early Care and Education Programs to Assess Key National Health and Safety Standards.

PubMed

Alkon, Abbey; Rose, Roberta; Wolff, Mimi; Kotch, Jonathan B; Aronson, Susan S

2016-01-01

The project aims were to (1) develop an observational Health and Safety Checklist to assess health and safety practices and conditions in early care and education (ECE) programs using Stepping Stones To Caring For Our Children, 3rd Edition national standards, (2) pilot test the Checklist, completed by nurse child care health consultants, to assess feasibility, ease of completion, objectivity, validity, and reliability, and (3) revise the Checklist based on the qualitative and quantitative results of the pilot study. The observable national health and safety standards were identified and then rated by health, safety, and child care experts using a Delphi technique to validate the standards as essential to prevent harm and promote health. Then, child care health consultants recruited ECE centers and pilot tested the 124-item Checklist. The pilot study was conducted in Arizona, California and North Carolina. The psychometric properties of the Checklist were assessed. The 37 participating ECE centers had 2627 children from ethnically-diverse backgrounds and primarily low-income families. The child care health consultants found the Checklist easy to complete, objective, and useful for planning health and safety interventions. The Checklist had content and face validity, inter-rater reliability, internal consistency, and concurrent validity. Based on the child care health consultant feedback and psychometric properties of the Checklist, the Checklist was revised and re-written at an 8th grade literacy level. The Health and Safety Checklist provides a standardized instrument of observable, selected national standards to assess the quality of health and safety in ECE centers.

75 FR 6123 - Federal Motor Vehicle Safety Standards; Occupant Crash Protection

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-08

... motor vehicle safety standard is in effect under this chapter, a State or a political subdivision of a... [Docket No. NHTSA-2009-0156] RIN 2127-AK57 Federal Motor Vehicle Safety Standards; Occupant Crash...'s response to petitions for reconsideration of a November 12, 2008 final rule that amended the child...

48 CFR 22.403-3 - Contract Work Hours and Safety Standards Act.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Contract Work Hours and... Standards for Contracts Involving Construction 22.403-3 Contract Work Hours and Safety Standards Act. The Contract Work Hours and Safety Standards Act (40 U.S.C. 3701 et seq.) requires that certain contracts (see...

Restaurant supervisor safety training: evaluating a small business training intervention.

PubMed

Bush, Diane; Paleo, Lyn; Baker, Robin; Dewey, Robin; Toktogonova, Nurgul; Cornelio, Deogracia

2009-01-01

We developed and assessed a program designed to help small business owners/managers conduct short training sessions with their employees, involve employees in identifying and addressing workplace hazards, and make workplace changes (including physical and work practice changes) to improve workplace safety. During 2006, in partnership with a major workers' compensation insurance carrier and a restaurant trade association, university-based trainers conducted workshops for more than 200 restaurant and food service owners/managers. Workshop participants completed posttests to assess their knowledge, attitudes, and intentions to implement health and safety changes. On-site follow-up interviews with 10 participants were conducted three to six months after the training to assess the extent to which program components were used and worksite changes were made. Post-training assessments demonstrated that attendees increased their understanding and commitment to health and safety, and felt prepared to provide health and safety training to their employees. Follow-up interviews indicated that participants incorporated core program concepts into their training and supervision practices. Participants conducted training, discussed workplace hazards and solutions with employees, and made changes in the workplace and work practices to improve workers' health and safety. This program demonstrated that owners of small businesses can adopt a philosophy of employee involvement in their health and safety programs if provided with simple, easy-to-use materials and a training demonstration. Attending a workshop where they can interact with other owners/ managers of small restaurants was also a key to the program's success.

29 CFR 1960.19 - Other Federal agency standards affecting occupational safety and health.

Code of Federal Regulations, 2014 CFR

2014-07-01

... safety and health. 1960.19 Section 1960.19 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Standards § 1960.19 Other Federal agency standards affecting occupational safety and health. (a) Where employees of different agencies...

29 CFR 1960.19 - Other Federal agency standards affecting occupational safety and health.

Code of Federal Regulations, 2013 CFR

2013-07-01

... safety and health. 1960.19 Section 1960.19 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Standards § 1960.19 Other Federal agency standards affecting occupational safety and health. (a) Where employees of different agencies...

29 CFR 1960.19 - Other Federal agency standards affecting occupational safety and health.

Code of Federal Regulations, 2012 CFR

2012-07-01

... safety and health. 1960.19 Section 1960.19 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Standards § 1960.19 Other Federal agency standards affecting occupational safety and health. (a) Where employees of different agencies...

Labor Standards and Safety Division, Alaska Department of Labor

Science.gov Websites

Deborah Kelly, Director The mission of Labor Standards and Safety is to ensure safe and legal working of state and federal standards, and by training employers and employees to follow safe and healthful

Administrative goals and safety standards for hazard control on forested recreation sites

Treesearch

Lee A. Paine

1973-01-01

For efficient control of tree hazard on recreation sites, a specific administrative goal must be selected. A safety standard designed to achieve the selected goal and a uniform hazard-rating procedure will then promote a consistent level of safety at an acceptable cost. Safety standards can be established with the aid of data for past years, and dollar evaluations are...

78 FR 37404 - Small Business Size Standards: Support Activities for Mining

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-20

... SMALL BUSINESS ADMINISTRATION 13 CFR Part 121 RIN 3245-AG44 Small Business Size Standards: Support Activities for Mining AGENCY: U.S. Small Business Administration. ACTION: Final rule. SUMMARY: The United States Small Business Administration (SBA) is increasing the small business size standards for three of...

Voluntary Product Standard PS 72-76: Toy Safety.

ERIC Educational Resources Information Center

National Bureau of Standards (DOC), Washington, DC.

The purpose of this voluntary product standard is to establish nationally recognized safety requirements and test methods for toys intended for use by children in age groups through 14 years. The standard relates to possible hazards that may not be readily recognized and which may be encountered in,normal use or after reasonably foreseeable abuse.…

Planning the Unplanned Experiment: Assessing the Efficacy of Standards for Safety Critical Software

NASA Technical Reports Server (NTRS)

Graydon, Patrick J.; Holloway, C. Michael

2015-01-01

We need well-founded means of determining whether software is t for use in safety-critical applications. While software in industries such as aviation has an excellent safety record, the fact that software aws have contributed to deaths illustrates the need for justi ably high con dence in software. It is often argued that software is t for safety-critical use because it conforms to a standard for software in safety-critical systems. But little is known about whether such standards `work.' Reliance upon a standard without knowing whether it works is an experiment; without collecting data to assess the standard, this experiment is unplanned. This paper reports on a workshop intended to explore how standards could practicably be assessed. Planning the Unplanned Experiment: Assessing the Ecacy of Standards for Safety Critical Software (AESSCS) was held on 13 May 2014 in conjunction with the European Dependable Computing Conference (EDCC). We summarize and elaborate on the workshop's discussion of the topic, including both the presented positions and the dialogue that ensued.

29 CFR 500.102 - Applicability of vehicle safety standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 3 2011-07-01 2011-07-01 false Applicability of vehicle safety standards. 500.102 Section 500.102 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR REGULATIONS MIGRANT AND SEASONAL AGRICULTURAL WORKER PROTECTION Motor Vehicle Safety and Insurance for Transportation of Migrant and Seasonal...

Radiation safety standards and their application: international policies and current issues.

PubMed

González, Abel J

2004-09-01

This paper briefly describes the current policies of the United Nations Scientific Committee on the Effects of Atomic Radiation and the International Commission on Radiological Protection and how these policies are converted into international radiation safety standards by the International Atomic Energy Agency, which is the only global organization-within the United Nations family of international agencies-with a statutory mandate not only to establish such standards but also to provide for their application. It also summarizes the current status of the established corpus of such international standards, and of it foreseeable evolution, as well as of legally binding undertakings by countries around the world that are linked to these standards. Moreover, this paper also reviews some major current global issues related to the application of international standards, including the following: strengthening of national infrastructures for radiation safety, including technical cooperation programs for assisting developing countries; occupational radiation safety challenges, including the protection of pregnant workers and their unborn children, dealing with working environments with high natural radiation levels, and occupational attributability of health effects (probability of occupational causation); restricting discharges of radioactive substances into the environment: reviewing current international policies vis-a-vis the growing concern on the radiation protection of the "environment;" radiological protection of patients undergoing radiodiagnostic and radiotherapeutic procedures: the current International Action Plan; safety and security of radiation sources: post-11 September developments; preparedness and response to radiation emergencies: enhancing the international network; safe transport of radioactive materials: new apprehensions; safety of radioactive waste management: concerns and connections with radiation protection; and radioactive residues remaining

49 CFR Appendix C to Part 238 - Suspension System Safety Performance Standards

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Suspension System Safety Performance Standards C Appendix C to Part 238 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PASSENGER EQUIPMENT SAFETY STANDARDS Pt. 238, App. C...

76 FR 29333 - Pipeline Safety: Meetings of the Technical Pipeline Safety Standards Committee and the Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-20

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No... Technical Hazardous Liquid Pipeline Safety Standards Committee AGENCY: Pipeline and Hazardous Materials... for natural gas pipelines and for hazardous liquid pipelines. Both committees were established under...

75 FR 22303 - Safety Standard for Bassinets and Cradles: Notice of Proposed Rulemaking

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-28

... an infant's development. Once an infant can push up by him/herself, a number of hazards are created... ``Commission'') to promulgate consumer product safety standards for durable infant or toddler products. These... product safety standards for durable infant or toddler products. These standards are to be ``substantially...

NASA safety standard for lifting devices and equipment

NASA Astrophysics Data System (ADS)

1990-09-01

NASA's minimum safety requirements are established for the design, testing, inspection, maintenance, certification, and use of overhead and gantry cranes (including top running monorail, underhung, and jib cranes), mobile cranes, derrick hoists, and special hoist supported personnel lifting devices (these do not include elevators, ground supported personnel lifts, or powered platforms). Minimum requirements are also addressed for the testing, inspection, and use of Hydra-sets, hooks, and slings. Safety standards are thoroughly detailed.

NASA safety standard for lifting devices and equipment

NASA Technical Reports Server (NTRS)

1990-01-01

NASA's minimum safety requirements are established for the design, testing, inspection, maintenance, certification, and use of overhead and gantry cranes (including top running monorail, underhung, and jib cranes), mobile cranes, derrick hoists, and special hoist supported personnel lifting devices (these do not include elevators, ground supported personnel lifts, or powered platforms). Minimum requirements are also addressed for the testing, inspection, and use of Hydra-sets, hooks, and slings. Safety standards are thoroughly detailed.

Patient Safety: Moving the Bar in Prison Health Care Standards

PubMed Central

Greifinger, Robert B.; Mellow, Jeff

2010-01-01

Improvements in community health care quality through error reduction have been slow to transfer to correctional settings. We convened a panel of correctional experts, which recommended 60 patient safety standards focusing on such issues as creating safety cultures at organizational, supervisory, and staff levels through changes to policy and training and by ensuring staff competency, reducing medication errors, encouraging the seamless transfer of information between and within practice settings, and developing mechanisms to detect errors or near misses and to shift the emphasis from blaming staff to fixing systems. To our knowledge, this is the first published set of standards focusing on patient safety in prisons, adapted from the emerging literature on quality improvement in the community. PMID:20864714

Firefighters as distributors of workplace safety and health information to small businesses

PubMed Central

Keller, Brenna M.; Cunningham, Thomas R.

2016-01-01

Background Small businesses bear a large burden of injury and death, and are difficult to reach with occupational safety and health (OSH) information. The National Institute for Occupational Safety and Health (NIOSH) developed a pilot study testing the feasibility of fire departments disseminating OSH information to small businesses during fire inspections. Methods Two sets of postcards were developed with unique, trackable URLs for the NIOSH Small Business Resource Guide. One set was distributed by firefighters, the other was mailed to small businesses. Participating inspectors were met with to discuss their experience. Results Neither distribution method resulted in a substantial number of site visits. Inspectors believed distributing postcards was an easy addition to their duties, and saw value in safety information. Conclusions There are barriers beyond awareness of availability that prevent small business owners from seeking OSH information. Research should focus on identifying barriers and developing better OSH information diffusion mechanisms. PMID:27594768

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2010 CFR

2010-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2011 CFR

2011-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2012 CFR

2012-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2014 CFR

2014-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2013 CFR

2013-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

40 CFR 80.553 - Under what conditions may the small refiner gasoline sulfur standards be extended for a small...

Code of Federal Regulations, 2010 CFR

2010-07-01

... refiner gasoline sulfur standards be extended for a small refiner of motor vehicle diesel fuel? 80.553... small refiner gasoline sulfur standards be extended for a small refiner of motor vehicle diesel fuel? (a) A refiner that has been approved by EPA for small refiner gasoline sulfur standards under § 80.240...

40 CFR 80.553 - Under what conditions may the small refiner gasoline sulfur standards be extended for a small...

Code of Federal Regulations, 2011 CFR

2011-07-01

... refiner gasoline sulfur standards be extended for a small refiner of motor vehicle diesel fuel? 80.553... small refiner gasoline sulfur standards be extended for a small refiner of motor vehicle diesel fuel? (a) A refiner that has been approved by EPA for small refiner gasoline sulfur standards under § 80.240...

Tighter Safety Rules Ahead for Academic Labs

ERIC Educational Resources Information Center

Long, Janice R.

1975-01-01

Indicates that specific laboratory standards for handling chemical carcinogens should become law in the near future. Small colleges and universities may have financial trouble in complying with laboratory safety standards investigated by the Occupational Safety and Health Administration. (GS)

Michigan safety belt use immediately following implementation of standard enforcement

DOT National Transportation Integrated Search

2000-05-01

Reported here are the results of a direct observation survey of safety belt use conducted in March 2000 to determine the effect the implementation of standard enforcement legislation has had on Michigan's safety belt use rate. In this study, 11,687 o...

78 FR 52848 - Occupational Safety and Health Standards for Aircraft Cabin Crewmembers

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-27

... [Docket No.: FAA-2012-0953] Occupational Safety and Health Standards for Aircraft Cabin Crewmembers AGENCY... regulation of some occupational safety and health conditions affecting cabin crewmembers on aircraft by the Occupational Safety and Health Administration. This policy statement will enhance occupational safety and...

29 CFR 500.103 - Activities not subject to vehicle safety standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 3 2011-07-01 2011-07-01 false Activities not subject to vehicle safety standards. 500.103... LABOR REGULATIONS MIGRANT AND SEASONAL AGRICULTURAL WORKER PROTECTION Motor Vehicle Safety and Insurance for Transportation of Migrant and Seasonal Agricultural Workers, Housing Safety and Health for Migrant...

29 CFR 500.103 - Activities not subject to vehicle safety standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Activities not subject to vehicle safety standards. 500.103... LABOR REGULATIONS MIGRANT AND SEASONAL AGRICULTURAL WORKER PROTECTION Motor Vehicle Safety and Insurance for Transportation of Migrant and Seasonal Agricultural Workers, Housing Safety and Health for Migrant...

76 FR 52231 - Restrictions on Operators Employing Former Flight Standards Service Aviation Safety Inspectors

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-22

... Standards Service Aviation Safety Inspectors AGENCY: Federal Aviation Administration (FAA), DOT. ACTION... responsible for the oversight of, a Flight Standards Service Aviation Safety Inspector, and had direct... . SUPPLEMENTARY INFORMATION: Authority for This Rulemaking The FAA's authority to issue rules on aviation safety...

Safety studies with the oral rabies virus vaccine strain SPBN GASGAS in the small Indian mongoose (Herpestes auropunctatus).

PubMed

Ortmann, Steffen; Vos, Ad; Kretzschmar, Antje; Walther, Nomusa; Kaiser, Christiane; Freuling, Conrad; Lojkic, Ivana; Müller, Thomas

2018-03-13

Oral vaccination of the small Indian mongoose against rabies has been suggested as a potential tool to eliminate mongoose-mediated rabies on several Caribbean islands. A recently developed oral rabies virus vaccine strain, SPBN GASGAS, has already been shown to be efficacious in this reservoir species. Since, all available oral rabies vaccines are based on replication-competent viruses and vaccine baits are distributed unsupervised in the environment, enhanced safety standards for such vaccine types are required. The results of safety studies, including overdose, repeated doses, dissemination and different routes of administration, in the target species are presented. It was shown that the construct was apathogenic, irrespective of dose and route of administration. Even when it was inoculated directly in the brain, it did not induce rabies infection. Furthermore, the vaccine strain did not spread within the target species after direct oral instillation beyond the site of entry. The vaccine strain SPBN GASGAS meets the safety requirements for live rabies virus vaccines in this target species, the small Indian mongoose.

78 FR 18965 - Submission for OMB Review; Comment Request: Safety Standard for Cigarette Lighters

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-28

... Request: Safety Standard for Cigarette Lighters AGENCY: Consumer Product Safety Commission. ACTION: Notice... Commission's safety standard for cigarette lighters, 16 CFR part 1210. DATES: Written comments on this... Cigarette Lighters, 16 CFR part 1210. One comment was received in response to that notice. The commenter...

77 FR 58739 - Small Business Size Standards: Educational Services

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-24

... programs, SBA establishes small business size definitions (referred to as size standards) for private... programs effectively, SBA establishes distinct definitions to determine which businesses are deemed small... businesses definitions (15 U.S.C. 632(a)). The Act also requires that small business definitions vary to...

NIST Standard Reference Material 3600: Absolute Intensity Calibration Standard for Small-Angle X-ray Scattering

DOE PAGES

Allen, Andrew J.; Zhang, Fan; Kline, R. Joseph; ...

2017-03-07

The certification of a new standard reference material for small-angle scattering [NIST Standard Reference Material (SRM) 3600: Absolute Intensity Calibration Standard for Small-Angle X-ray Scattering (SAXS)], based on glassy carbon, is presented. Creation of this SRM relies on the intrinsic primary calibration capabilities of the ultra-small-angle X-ray scattering technique. This article describes how the intensity calibration has been achieved and validated in the certified Q range, Q = 0.008–0.25 Å –1, together with the purpose, use and availability of the SRM. The intensity calibration afforded by this robust and stable SRM should be applicable universally to all SAXS instruments thatmore » employ a transmission measurement geometry, working with a wide range of X-ray energies or wavelengths. As a result, the validation of the SRM SAXS intensity calibration using small-angle neutron scattering (SANS) is discussed, together with the prospects for including SANS in a future renewal certification.« less

NIST Standard Reference Material 3600: Absolute Intensity Calibration Standard for Small-Angle X-ray Scattering

DOE Office of Scientific and Technical Information (OSTI.GOV)

Allen, Andrew J.; Zhang, Fan; Kline, R. Joseph

The certification of a new standard reference material for small-angle scattering [NIST Standard Reference Material (SRM) 3600: Absolute Intensity Calibration Standard for Small-Angle X-ray Scattering (SAXS)], based on glassy carbon, is presented. Creation of this SRM relies on the intrinsic primary calibration capabilities of the ultra-small-angle X-ray scattering technique. This article describes how the intensity calibration has been achieved and validated in the certified Q range, Q = 0.008–0.25 Å –1, together with the purpose, use and availability of the SRM. The intensity calibration afforded by this robust and stable SRM should be applicable universally to all SAXS instruments thatmore » employ a transmission measurement geometry, working with a wide range of X-ray energies or wavelengths. As a result, the validation of the SRM SAXS intensity calibration using small-angle neutron scattering (SANS) is discussed, together with the prospects for including SANS in a future renewal certification.« less

NIST Standard Reference Material 3600: Absolute Intensity Calibration Standard for Small-Angle X-ray Scattering.

PubMed

Allen, Andrew J; Zhang, Fan; Kline, R Joseph; Guthrie, William F; Ilavsky, Jan

2017-04-01

The certification of a new standard reference material for small-angle scattering [NIST Standard Reference Material (SRM) 3600: Absolute Intensity Calibration Standard for Small-Angle X-ray Scattering (SAXS)], based on glassy carbon, is presented. Creation of this SRM relies on the intrinsic primary calibration capabilities of the ultra-small-angle X-ray scattering technique. This article describes how the intensity calibration has been achieved and validated in the certified Q range, Q = 0.008-0.25 Å -1 , together with the purpose, use and availability of the SRM. The intensity calibration afforded by this robust and stable SRM should be applicable universally to all SAXS instruments that employ a transmission measurement geometry, working with a wide range of X-ray energies or wavelengths. The validation of the SRM SAXS intensity calibration using small-angle neutron scattering (SANS) is discussed, together with the prospects for including SANS in a future renewal certification.

Standards Guidelines. Safety in Oregon Schools. OAR 581-22-706.

ERIC Educational Resources Information Center

Oregon State Dept. of Education, Salem.

This document contains guidelines that help Oregon schools meet the components of Oregon Administrative Rule 581-22-706, Emergency Plans and Safety Programs. The standard mandates that Oregon schools shall maintain a comprehensive safety program for all employees and students. School districts may alter the guidelines provided in this guidebook to…

Hydrogen Safety Issues Compared to Safety Issues with Methane and Propane

NASA Astrophysics Data System (ADS)

Green, M. A.

2006-04-01

The hydrogen economy is not possible if the safety standards currently applied to liquid hydrogen and hydrogen gas by many laboratories are applied to devices that use either liquid or gaseous hydrogen. Methane and propane are commonly used by ordinary people without the special training. This report asks, "How is hydrogen different from flammable gasses that are commonly being used all over the world?" This report compares the properties of hydrogen, methane and propane and how these properties may relate to safety when they are used in both the liquid and gaseous state. Through such an analysis, sensible safety standards for the large-scale (or even small-scale) use of liquid and gaseous hydrogen systems can be developed. This paper is meant to promote discussion of issues related to hydrogen safety so that engineers designing equipment can factor sensible safety standards into their designs.

76 FR 27952 - Small Business Size Standards: Professional, Scientific and Technical Services.

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-13

... Administration (SBA or Agency) proposed to increase small business size standards for 35 industries and one sub... SMALL BUSINESS ADMINISTRATION 13 CFR Part 121 RIN 3245-AG07 Small Business Size Standards: Professional, Scientific and Technical Services. AGENCY: U.S. Small Business Administration. ACTION: Proposed...

2016 Updated American Society of Clinical Oncology/Oncology Nursing Society Chemotherapy Administration Safety Standards, Including Standards for Pediatric Oncology.

PubMed

Neuss, Michael N; Gilmore, Terry R; Belderson, Kristin M; Billett, Amy L; Conti-Kalchik, Tara; Harvey, Brittany E; Hendricks, Carolyn; LeFebvre, Kristine B; Mangu, Pamela B; McNiff, Kristen; Olsen, MiKaela; Schulmeister, Lisa; Von Gehr, Ann; Polovich, Martha

2016-12-01

Purpose To update the ASCO/Oncology Nursing Society (ONS) Chemotherapy Administration Safety Standards and to highlight standards for pediatric oncology. Methods The ASCO/ONS Chemotherapy Administration Safety Standards were first published in 2009 and updated in 2011 to include inpatient settings. A subsequent 2013 revision expanded the standards to include the safe administration and management of oral chemotherapy. A joint ASCO/ONS workshop with stakeholder participation, including that of the Association of Pediatric Hematology Oncology Nurses and American Society of Pediatric Hematology/Oncology, was held on May 12, 2015, to review the 2013 standards. An extensive literature search was subsequently conducted, and public comments on the revised draft standards were solicited. Results The updated 2016 standards presented here include clarification and expansion of existing standards to include pediatric oncology and to introduce new standards: most notably, two-person verification of chemotherapy preparation processes, administration of vinca alkaloids via minibags in facilities in which intrathecal medications are administered, and labeling of medications dispensed from the health care setting to be taken by the patient at home. The standards were reordered and renumbered to align with the sequential processes of chemotherapy prescription, preparation, and administration. Several standards were separated into their respective components for clarity and to facilitate measurement of adherence to a standard. Conclusion As oncology practice has changed, so have chemotherapy administration safety standards. Advances in technology, cancer treatment, and education and training have prompted the need for periodic review and revision of the standards. Additional information is available at http://www.asco.org/chemo-standards .

77 FR 71752 - Federal Motor Vehicle Safety Standards; Lamps, Reflective Devices, and Associated Equipment

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-04

... [Docket No. NHTSA-2012-0174] RIN 2127-Al27 Federal Motor Vehicle Safety Standards; Lamps, Reflective... less than 30 feet in overall length, to the Federal motor vehicle safety standard (FMVSS) on lamps... final rule reorganizing the standard on December 4, 2007. DATES: Comments to this proposal must be...

77 FR 76005 - Submission for OMB Review; Comment Request-Safety Standard for Walk-Behind Power Lawn Mowers

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-26

... Request--Safety Standard for Walk-Behind Power Lawn Mowers AGENCY: Consumer Product Safety Commission... with the Commission's safety standard for walk- behind power lawn mowers. DATES: Written comments on... of approval of the collection of information required in the Safety Standard for Walk-Behind Power...

An overview of revised NASA safety standard 1740.14

NASA Technical Reports Server (NTRS)

Reynolds, Robert; Eichler, Peter; Johnson, Nicholas

1997-01-01

Following a broad review of the debris control guidelines outside of NASA and according to additional feedback on the guidelines from within NASA, revisions were made to the NASA safety standard 1740.14. The NASA policy to limit the generation of orbital debris on NASA missions, stated in the NASA management instruction 1700.8 and implemented in the form of the NASA safety standard (NSS) 1740.14 is described together with the revisions implemented. The overall direction of the guidelines is the same, but the details of many of the guidelines were changed, including: changes for tether programs and for the control of operational debris. The NASA will continue to review the guidelines as new measurements and improved models of the environment are obtained.

76 FR 18073 - Track Safety Standards; Concrete Crossties

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-01

... metrics would be undesirable and restrict certain fastener assembly designs and capabilities to control... Track Safety Standards Working Group IV. FRA's Approach to Concrete Crossties A. Rail Cant B. Automated... and non-compliant track geometry can cause high- concentrated non-uniform dynamic loading, usually...

76 FR 51058 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-17

... CFR part 48 training plan to the Metal/ Nonmetal Safety and Health District Manager. In addition to... DEPARTMENT OF LABOR Mine Safety and Health Administration Petitions for Modification of Application of Existing Mandatory Safety Standards AGENCY: Mine Safety and Health Administration, Labor...

48 CFR 1352.271-82 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2014 CFR

2014-10-01

... occupational safety and health standards for ship repair. 1352.271-82 Section 1352.271-82 Federal Acquisition... of Provisions and Clauses 1352.271-82 Department of Labor occupational safety and health standards... Occupational Safety and Health Standards for Ship Repair (APR 2010) The contractor, in performance of all work...

48 CFR 1352.271-82 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2011 CFR

2011-10-01

... occupational safety and health standards for ship repair. 1352.271-82 Section 1352.271-82 Federal Acquisition... of Provisions and Clauses 1352.271-82 Department of Labor occupational safety and health standards... Occupational Safety and Health Standards for Ship Repair (APR 2010) The contractor, in performance of all work...

48 CFR 1352.271-82 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2013 CFR

2013-10-01

... occupational safety and health standards for ship repair. 1352.271-82 Section 1352.271-82 Federal Acquisition... of Provisions and Clauses 1352.271-82 Department of Labor occupational safety and health standards... Occupational Safety and Health Standards for Ship Repair (APR 2010) The contractor, in performance of all work...

48 CFR 1352.271-82 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2012 CFR

2012-10-01

... occupational safety and health standards for ship repair. 1352.271-82 Section 1352.271-82 Federal Acquisition... of Provisions and Clauses 1352.271-82 Department of Labor occupational safety and health standards... Occupational Safety and Health Standards for Ship Repair (APR 2010) The contractor, in performance of all work...

48 CFR 1352.271-82 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2010 CFR

2010-10-01

... occupational safety and health standards for ship repair. 1352.271-82 Section 1352.271-82 Federal Acquisition... of Provisions and Clauses 1352.271-82 Department of Labor occupational safety and health standards... Occupational Safety and Health Standards for Ship Repair (APR 2010) The contractor, in performance of all work...

Survey of food safety practices on small to medium-sized farms and in farmers markets.

PubMed

Harrison, Judy A; Gaskin, Julia W; Harrison, Mark A; Cannon, Jennifer L; Boyer, Renee R; Zehnder, Geoffrey W

2013-11-01

As produce consumption has increased, so have foodborne disease outbreaks associated with fresh produce. Little research has addressed food safety practices used on small to medium-sized farms selling locally or in farmers markets. This study evaluated current food safety practices used by farmers on small to medium-sized farms and managers of farmers markets in Georgia, Virginia, and South Carolina based on responses to surveys. Surveys were developed, pretested, and revised before implementation with target audiences and were implemented via mail and the Web to maximize participation, with reminders sent to nonrespondents. Data were collected from 226 farmers and 45 market managers. Frequencies and percentages were calculated for all response variables. Responses from farmers indicated that more than 56% of them use manures. Of those who use manures, 34% use raw or mixtures of raw and composted manure, and over 26% wait fewer than 90 days between application of raw manure and harvest. Over 27% use water sources that have not been tested for safety for irrigation, and 16% use such water sources for washing produce. Over 43% do not sanitize surfaces that touch produce at the farm. Only 33% of farmers always clean transport containers between uses. Responses from market managers indicated that over 42% have no food safety standards in place for the market. Only 2 to 11% ask farmers specific questions about conditions on the farm that could affect product safety. Less than 25% of managers sanitize market surfaces. Only 11% always clean market containers between uses. Over 75% of markets offer no sanitation training to workers or vendors. While farmers and market managers are using many good practices, the results indicate that some practices being used may put consumers at risk of foodborne illness. Consequently, there is a need for training for both farmers and market managers.

76 FR 69764 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-09

... DEPARTMENT OF LABOR Mine Safety and Health Administration Petitions for Modification of Application of Existing Mandatory Safety Standards AGENCY: Mine Safety and Health Administration, Labor. ACTION: Notice. SUMMARY: Section 101(c) of the Federal Mine Safety and Health Act of 1977 and 30 CFR part...

75 FR 27428 - Safety Standards for Steel Erection

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-17

... in National Highway System construction projects to comply with a number of standards, policies, and...://www.fhwa.dot.gov/bridge/lrfd/index.htm .) For projects involving bridge construction (e.g., temporary... of these requirements will enhance the safety of employees operating on or near structural steel...

Planning the Unplanned Experiment: Towards Assessing the Efficacy of Standards for Safety-Critical Software

NASA Technical Reports Server (NTRS)

Graydon, Patrick J.; Holloway, C. M.

2015-01-01

Safe use of software in safety-critical applications requires well-founded means of determining whether software is fit for such use. While software in industries such as aviation has a good safety record, little is known about whether standards for software in safety-critical applications 'work' (or even what that means). It is often (implicitly) argued that software is fit for safety-critical use because it conforms to an appropriate standard. Without knowing whether a standard works, such reliance is an experiment; without carefully collecting assessment data, that experiment is unplanned. To help plan the experiment, we organized a workshop to develop practical ideas for assessing software safety standards. In this paper, we relate and elaborate on the workshop discussion, which revealed subtle but important study design considerations and practical barriers to collecting appropriate historical data and recruiting appropriate experimental subjects. We discuss assessing standards as written and as applied, several candidate definitions for what it means for a standard to 'work,' and key assessment strategies and study techniques and the pros and cons of each. Finally, we conclude with thoughts about the kinds of research that will be required and how academia, industry, and regulators might collaborate to overcome the noted barriers.

34 CFR 75.609 - Comply with safety and health standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 1 2010-07-01 2010-07-01 false Comply with safety and health standards. 75.609 Section 75.609 Education Office of the Secretary, Department of Education DIRECT GRANT PROGRAMS What... planning for and designing facilities, a grantee shall observe: (a) The standards under the Occupational...

Intraoperative and postoperative feasibility and safety of total tubeless, tubeless, small-bore tube, and standard percutaneous nephrolithotomy: a systematic review and network meta-analysis of 16 randomized controlled trials.

PubMed

Lee, Joo Yong; Jeh, Seong Uk; Kim, Man Deuk; Kang, Dong Hyuk; Kwon, Jong Kyou; Ham, Won Sik; Choi, Young Deuk; Cho, Kang Su

2017-06-27

Percutaneous nephrolithotomy (PCNL) is performed to treat relatively large renal stones. Recent publications indicate that tubeless and total tubeless (stentless) PCNL is safe in selected patients. We performed a systematic review and network meta-analysis to evaluate the feasibility and safety of different PCNL procedures, including total tubeless, tubeless with stent, small-bore tube, and large-bore tube PCNLs. PubMed, Cochrane Central Register of Controlled Trials, and EMBASE™ databases were searched to identify randomized controlled trials published before December 30, 2013. One researcher examined all titles and abstracts found by the searches. Two investigators independently evaluated the full-text articles to determine whether those met the inclusion criteria. Qualities of included studies were rated with Cochrane's risk-of-bias assessment tool. Sixteen studies were included in the final syntheses including pairwise and network meta-analyses. Operation time, pain scores, and transfusion rates were not significantly different between PCNL procedures. Network meta-analyses demonstrated that for hemoglobin changes, total tubeless PCNL may be superior to standard PCNL (mean difference [MD] 0.65, 95% CI 0.14-1.13) and tubeless PCNLs with stent (MD -1.14, 95% CI -1.65--0.62), and small-bore PCNL may be superior to tubeless PCNL with stent (MD 1.30, 95% CI 0.27-2.26). Network meta-analyses also showed that for length of hospital stay, total tubeless (MD 1.33, 95% CI 0.23-2.43) and tubeless PCNLs with stent (MD 0.99, 95% CI 0.19-1.79) may be superior to standard PCNL. In rank probability tests, small-bore tube and total tubeless PCNLs were superior for operation time, pain scores, and hemoglobin changes. For hemoglobin changes, total tubeless and small-bore PCNLs may be superior to other methods. For hospital stay, total tubeless and tubeless PCNLs with stent may be superior to other procedures.

48 CFR 1371.113 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2013 CFR

2013-10-01

... occupational safety and health standards for ship repair. 1371.113 Section 1371.113 Federal Acquisition... CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.113 Department of Labor occupational safety and health standards for ship repair. Insert clause 1352.271-82, Department of Labor Occupational Safety and Health...

48 CFR 1371.113 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2012 CFR

2012-10-01

... occupational safety and health standards for ship repair. 1371.113 Section 1371.113 Federal Acquisition... CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.113 Department of Labor occupational safety and health standards for ship repair. Insert clause 1352.271-82, Department of Labor Occupational Safety and Health...

48 CFR 1371.113 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2014 CFR

2014-10-01

... occupational safety and health standards for ship repair. 1371.113 Section 1371.113 Federal Acquisition... CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.113 Department of Labor occupational safety and health standards for ship repair. Insert clause 1352.271-82, Department of Labor Occupational Safety and Health...

48 CFR 1371.113 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2011 CFR

2011-10-01

... occupational safety and health standards for ship repair. 1371.113 Section 1371.113 Federal Acquisition... CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.113 Department of Labor occupational safety and health standards for ship repair. Insert clause 1352.271-82, Department of Labor Occupational Safety and Health...

48 CFR 1371.113 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2010 CFR

2010-10-01

... occupational safety and health standards for ship repair. 1371.113 Section 1371.113 Federal Acquisition... CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.113 Department of Labor occupational safety and health standards for ship repair. Insert clause 1352.271-82, Department of Labor Occupational Safety and Health...

30 CFR 7.10 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false MSHA acceptance of equivalent non-MSHA product... General § 7.10 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non...) [Reserved] (d) After MSHA has determined that non-MSHA product safety standards are equivalent and has...

30 CFR 7.10 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false MSHA acceptance of equivalent non-MSHA product... General § 7.10 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non...) [Reserved] (d) After MSHA has determined that non-MSHA product safety standards are equivalent and has...

30 CFR 7.10 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false MSHA acceptance of equivalent non-MSHA product... General § 7.10 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non...) [Reserved] (d) After MSHA has determined that non-MSHA product safety standards are equivalent and has...

30 CFR 7.10 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false MSHA acceptance of equivalent non-MSHA product... General § 7.10 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non...) [Reserved] (d) After MSHA has determined that non-MSHA product safety standards are equivalent and has...

30 CFR 7.10 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false MSHA acceptance of equivalent non-MSHA product... General § 7.10 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non...) [Reserved] (d) After MSHA has determined that non-MSHA product safety standards are equivalent and has...

OSHA Standard Time: Worker Safety Rules for Schools.

ERIC Educational Resources Information Center

Smith, Sharon E.; Roy, Kenneth R.

1994-01-01

Briefly describes six of the Occupational Safety and Health Administration (OSHA) standards applicable to school districts. Provides a suggested approach for compliance and discusses how one district has begun to meet the challenge. The mandated OSHA programs concern the following: (1) hazard communication; (2) chemical hygiene; (3) bloodborne…

Safety and tolerability of combination therapy vs. standard treatment alone for patients with previously treated non-small cell lung cancer | Center for Cancer Research

Cancer.gov

Dr. James Gulley is leading a team to test the safety and tolerability of the combination of nivolumab and CV301 to see if it can improve the survival for patientis with metastatic non-small cell lung cancer.  Learn more...

Understanding safety climate in small automobile collision repair shops.

PubMed

Parker, David L; Brosseau, Lisa M; Bejan, Anca; Skan, Maryellen; Xi, Min

2014-01-01

In the United States, approximately 236,000 people work in 37,600 auto collision-repair businesses. Workers in the collision-repair industry may be exposed to a wide range of physical and chemical hazards. This manuscript examines the relationship of safety climate as reported by collision repair shop workers and owners to: (1) an independent business safety assessment, and (2) employee self-reported work practices. The study was conducted in the Twin Cities metropolitan area. A total of 199 workers from 49 collision shops completed a survey of self-reported work practices and safety climate. Surveys were completed by an owner or manager in all but three shops. In general, self-reported work practices were poor. Workers' scores on safety climate were uniformly lower than those of owners. For workers, there was no correlation between how well the business scored on an independent audit of business safety practices and the safety climate measures they reported. For owners, however, there was a positive correlation between safety climate scores and the business safety assessment. For workers, safety rules and procedures were associated with improved work practices for those engaged in both painting-related and body technician-related activities. The enforcement of safety rules and procedures emerged as a strong factor positively affecting self-reported work practices. These findings identify a simple, cost effective path to reducing hazards in small workplaces. © 2013 Wiley Periodicals, Inc.

Small Column Ion Exchange Design and Safety Strategy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huff, T.; Rios-Armstrong, M.; Edwards, R.

2011-02-07

Small Column Ion Exchange (SCIX) is a transformational technology originally developed by the Department of Energy (DOE) Environmental Management (EM-30) office and is now being deployed at the Savannah River Site (SRS) to significantly increase overall salt processing capacity and accelerate the Liquid Waste System life-cycle. The process combines strontium and actinide removal using Monosodium Titanate (MST), Rotary Microfiltration, and cesium removal using Crystalline Silicotitanate (CST, specifically UOP IONSIV{reg_sign}IE-911 ion exchanger) to create a low level waste stream to be disposed in grout and a high level waste stream to be vitrified. The process also includes preparation of the streamsmore » for disposal, e.g., grinding of the loaded CST material. These waste processing components are technically mature and flowsheet integration studies are being performed including glass formulations studies, application specific thermal modeling, and mixing studies. The deployment program includes design and fabrication of the Rotary Microfilter (RMF) assembly, ion-exchange columns (IXCs), and grinder module, utilizing an integrated system safety design approach. The design concept is to install the process inside an existing waste tank, Tank 41H. The process consists of a feed pump with a set of four RMFs, two IXCs, a media grinder, three Submersible Mixer Pumps (SMPs), and all supporting infrastructure including media receipt and preparation facilities. The design addresses MST mixing to achieve the required strontium and actinide removal and to prevent future retrieval problems. CST achieves very high cesium loadings (up to 1,100 curies per gallon (Ci/gal) bed volume). The design addresses the hazards associated with this material including heat management (in column and in-tank), as detailed in the thermal modeling. The CST must be size reduced for compatibility with downstream processes. The design addresses material transport into and out of the grinder

DHS small-scale safety and thermal testing of improvised explosives-comparison of testing performance

NASA Astrophysics Data System (ADS)

Reynolds, J. G.; Sandstrom, M. M.; Brown, G. W.; Warner, K. F.; Phillips, J. J.; Shelley, T. J.; Reyes, J. A.; Hsu, P. C.

2014-05-01

One of the first steps in establishing safe handling procedures for explosives is small-scale safety and thermal (SSST) testing. To better understand the response of improvised materials or homemade explosives (HMEs) to SSST testing, 16 HME materials were compared to three standard military explosives in a proficiency-type round robin study among five laboratories-two DoD and three DOE-sponsored by DHS. The testing matrix has been designed to address problems encountered with improvised materials-powder mixtures, liquid suspensions, partially wetted solids, immiscible liquids, and reactive materials. More than 30 issues have been identified that indicate standard test methods may require modification when applied to HMEs to derive accurate sensitivity assessments needed for developing safe handling and storage practices. This paper presents a generalized comparison of the results among the testing participants, comparison of friction results from BAM (German Bundesanstalt für Materi-alprüfung) and ABL (Allegany Ballistics Laboratory) designed testing equipment, and an overview of the statistical results from the RDX (1,3,5-Trinitroperhydro-1,3,5-triazine) standard tested throughout the proficiency test.

Research on the management and endorsement of nuclear safety standards in the United States and its revelation for China

NASA Astrophysics Data System (ADS)

Liu, Ting; Tian, Yu; Yang, Lili; Gao, Siyi; Song, Dahu

2018-01-01

This paper introduces the American standard system, the Nuclear Regulatory Commission (NRC)’s responsibility, NRC nuclear safety regulations and standards system, studies on NRC’s standards management and endorsement mode, analyzes the characteristics of NRC standards endorsement management, and points out its disadvantages. This paper draws revelation from the standard management and endorsement model of NRC and points suggestion to China’s nuclear and radiation safety standards management.The issue of the “Nuclear Safety Law”plays an important role in China’s nuclear and radiation safety supervision. Nuclear and radiation safety regulations and standards are strong grips on the implementation of “Nuclear Safety Law”. This paper refers on the experience of international advanced countriy, will effectively promote the improvement of the endorsed management of China’s nuclear and radiation safety standards.

Effects of health and safety problem recognition on small business facility investment

PubMed Central

2013-01-01

Objectives This study involved a survey of the facility investment experiences, which was designed to recognize the importance of health and safety problems, and industrial accident prevention. Ultimately, we hope that small scale industries will create effective industrial accident prevention programs and facility investments. Methods An individual survey of businesses’ present physical conditions, recognition of the importance of the health and safety problems, and facility investment experiences for preventing industrial accidents was conducted. The survey involved 1,145 business operators or management workers in small business places with fewer than 50 workers in six industrial complexes. Results Regarding the importance of occupational health and safety problems (OHS), 54.1% said it was “very important”. Received technical and financial support, and industrial accidents that occurred during the past three years were recognized as highly important for OHS. In an investigation regarding facility investment experiences for industrial accident prevention, the largest factors were business size, greater numbers of industrial accidents, greater technical and financial support received, and greater recognition of the importance of the OHS. The related variables that decided facility investment for industry accident prevention in a logistic regression analysis were the experiences of business facilities where industrial accidents occurred during the past three years, received technical and financial support, and recognition of the OHS. Those considered very important were shown to be highly significant. Conclusions Recognition of health and safety issues was higher when small businesses had experienced industrial accidents or received financial support. The investment in industrial accidents was greater when health and safety issues were recognized as important. Therefore, the goal of small business health and safety projects is to prioritize health and safety

Effects of health and safety problem recognition on small business facility investment.

PubMed

Park, Jisu; Jeong, Harin; Hong, Sujin; Park, Jong-Tae; Kim, Dae-Sung; Kim, Jongseo; Kim, Hae-Joon

2013-10-23

This study involved a survey of the facility investment experiences, which was designed to recognize the importance of health and safety problems, and industrial accident prevention. Ultimately, we hope that small scale industries will create effective industrial accident prevention programs and facility investments. An individual survey of businesses' present physical conditions, recognition of the importance of the health and safety problems, and facility investment experiences for preventing industrial accidents was conducted. The survey involved 1,145 business operators or management workers in small business places with fewer than 50 workers in six industrial complexes. Regarding the importance of occupational health and safety problems (OHS), 54.1% said it was "very important". Received technical and financial support, and industrial accidents that occurred during the past three years were recognized as highly important for OHS. In an investigation regarding facility investment experiences for industrial accident prevention, the largest factors were business size, greater numbers of industrial accidents, greater technical and financial support received, and greater recognition of the importance of the OHS. The related variables that decided facility investment for industry accident prevention in a logistic regression analysis were the experiences of business facilities where industrial accidents occurred during the past three years, received technical and financial support, and recognition of the OHS. Those considered very important were shown to be highly significant. Recognition of health and safety issues was higher when small businesses had experienced industrial accidents or received financial support. The investment in industrial accidents was greater when health and safety issues were recognized as important. Therefore, the goal of small business health and safety projects is to prioritize health and safety issues in terms of business management and

DOE standard 3009 - a reasoned, practical approach to integrating criticality safety into SARs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vessard, S.G.

1995-12-31

In the past there have been efforts by the U.S. Department of Energy (DOE) to provide guidance on those elements that should be included in a facility`s safety analysis report (SAR). In particular, there are two DOE Orders (5480.23, {open_quotes}Nuclear Safety Analysis Reports,{close_quotes} and 5480.24, {open_quotes}Nuclear Criticality Safety{close_quotes}), an interpretive guidance document (NE-70, Interpretive Guidance for DOE Order 5480.24, {open_quotes}Nuclear Criticality Safety{close_quotes}), and DOE Standard DOE-STD-3009-94 {open_quotes}Preparation Guide for U.S. Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports.{close_quotes} Of these, the most practical and useful (pertaining to the application of criticality safety) is DOE-STD-3009-94. This paper is a reviewmore » of Chapters 3, 4, and 6 of this standard and how they provide very clear, helpful, and reasoned criticality safety guidance.« less

Transportation Safety Standards for Wheelchair Users: A Review of Voluntary Standards for Improved Safety, Usability, and Independence of Wheelchair-Seated Travelers

ERIC Educational Resources Information Center

Schneider, Lawrence W.; Manary, Miriam A.; Hobson, Douglas A.

2008-01-01

Safe transportation for wheelchair users who do not transfer to the vehicle seat when traveling in motor vehicles requires after-market wheelchair tiedown and occupant restraint systems (WTORS) to secure the wheelchair and provide crashworthy restraint for the wheelchair-seated occupant. In the absence of adequate government safety standards,…

77 FR 10943 - Small Business Size Standards: Transportation and Warehousing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-24

... assistance programs, SBA establishes small business size definitions (referred to as size standards) for... business concern * * *'' Sec. 3(a)(2)(C)(ii)(II) [emphasis added]. Third, SBA's existing definitions of... establishes distinct definitions to determine which businesses are deemed small businesses. The Small Business...

29 CFR 1960.19 - Other Federal agency standards affecting occupational safety and health.

Code of Federal Regulations, 2010 CFR

2010-07-01

... safety and health. 1960.19 Section 1960.19 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Standards § 1960.19 Other Federal...

29 CFR 1960.19 - Other Federal agency standards affecting occupational safety and health.

Code of Federal Regulations, 2011 CFR

2011-07-01

... safety and health. 1960.19 Section 1960.19 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Standards § 1960.19 Other Federal...

Radiation safety of crew and passengers of air transportation in civil aviation. Provisional standards

NASA Technical Reports Server (NTRS)

Aksenov, A. F.; Burnazyan, A. I.

1985-01-01

The purpose and application of the provisional standards for radiation safety of crew and passengers in civil aviation are given. The radiation effect of cosmic radiation in flight on civil aviation air transport is described. Standard levels of radiation and conditions of radiation safety are discussed.

Measurement and standardization of eye safety for optical radiation of LED products

NASA Astrophysics Data System (ADS)

Mou, Tongsheng; Peng, Zhenjian

2013-06-01

The blue light hazard (BLH) to human eye's retina is now a new issue emerging in applications of artificial light sources. Especially for solid state lighting sources based on the blue chip-LED(GaN), the photons with their energy more than 2.4 eV show photochemical effects on the retina significantly, raising damage both in photoreceptors and retinal pigment epithelium. The photobiological safety of artificial light sources emitting optical radiation has gained more and more attention worldwide and addressed by international standards IEC 62471-2006(CIE S009/E: 2002). Meanwhile, it is involved in IEC safety specifications of LED lighting products and covered by European Directive 2006/25/EC on the minimum health and safety requirements regarding the exposure of the workers to artificial optical radiation. In practical applications of the safety standards, the measuring methods of optical radiation from LED products to eyes are important in establishment of executable methods in the industry. In 2011, a new project to develop the international standard of IEC TR62471-4,that is "Measuring methods of optical radiation related to photobiological safety", was approved and are now under way. This paper presents the concerned methods for the assessment of optical radiation hazards in the standards. Furthermore, a retina radiance meter simulating eye's optical geometry is also described, which is a potential tool for blue light hazard assessment of retinal exposure to optical radiation. The spectroradiometric method integrated with charge-coupled device(CCD) imaging system is introduced to provide more reliable results.

45 CFR 2543.84 - Contract Work Hours and Safety Standards Act.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 4 2010-10-01 2010-10-01 false Contract Work Hours and Safety Standards Act. 2543... laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work week is... pay for all hours worked in excess of 40 hours in the work week. Section 107 of the Act is applicable...

78 FR 2662 - Proposed Extension of Approval of Information Collection; Comment Request: Safety Standard for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-14

... Information Collection; Comment Request: Safety Standard for Cigarette Lighters AGENCY: Consumer Product... disposable and novelty cigarette lighters. This collection of information consists of testing and recordkeeping requirements in certification regulations implementing the Safety Standard for Cigarette Lighters...

A series of small scientific satellite with flexible standard bus

NASA Astrophysics Data System (ADS)

Saito, Hirobumi; Sawai, Syujiro; Sakai, Shin-ichiro; Fukuda, Seisuke; Kitade, Kenji

2009-11-01

Japan Aerospace Exploration Agency has a plan to develop the small satellite standard bus for various scientific missions and disaster monitoring missions. The satellite bus is a class of 250-400 kg mass with three-axis control capability of 0.02∘ accuracy. The science missions include X-ray astronomy missions, planetary telescope missions, and magnetosphere atmosphere missions. In order to adapt the wide range of mission requirements, the satellite bus has to be provided with flexibility. The concepts of modularization, reusability, and product line are applied to the standard bus system. This paper describes the characteristics of the small satellite standard bus which will be firstly launched in 2011.

Patient safety principles in family medicine residency accreditation standards and curriculum objectives

PubMed Central

Kassam, Aliya; Sharma, Nishan; Harvie, Margot; O’Beirne, Maeve; Topps, Maureen

2016-01-01

Abstract Objective To conduct a thematic analysis of the College of Family Physicians of Canada’s (CFPC’s) Red Book accreditation standards and the Triple C Competency-based Curriculum objectives with respect to patient safety principles. Design Thematic content analysis of the CFPC’s Red Book accreditation standards and the Triple C curriculum. Setting Canada. Main outcome measures Coding frequency of the patient safety principles (ie, patient engagement; respectful, transparent relationships; complex systems; a just and trusting culture; responsibility and accountability for actions; and continuous learning and improvement) found in the analyzed CFPC documents. Results Within the analyzed CFPC documents, the most commonly found patient safety principle was patient engagement (n = 51 coding references); the least commonly found patient safety principles were a just and trusting culture (n = 5 coding references) and complex systems (n = 5 coding references). Other patient safety principles that were uncommon included responsibility and accountability for actions (n = 7 coding references) and continuous learning and improvement (n = 12 coding references). Conclusion Explicit inclusion of patient safety content such as the use of patient safety principles is needed for residency training programs across Canada to ensure the full spectrum of care is addressed, from community-based care to acute hospital-based care. This will ensure a patient safety culture can be cultivated from residency and sustained into primary care practice. PMID:27965349

Prevalence and determinants of non-standard motorcycle safety helmets amongst food delivery workers in Selangor and Kuala Lumpur.

PubMed

Kulanthayan, S; See, Lai Git; Kaviyarasu, Y; Nor Afiah, M Z

2012-05-01

Almost half of the global traffic crashes involve vulnerable groups such as pedestrian, cyclists and two-wheeler users. The main objective of this study was to determine the factors that influence standard of the safety helmets used amongst food delivery workers by presence of Standard and Industrial Research Institute of Malaysia (SIRIM) certification label. A cross sectional study was conducted amongst 150 food delivery workers from fast food outlets in the vicinity of Selangor and Kuala Lumpur. During observation, safety helmets were classified as standard safety helmet in the presence of SIRIM label and non-standard in the absence of the label. They were approached for questionnaire participation once consent was obtained and were requested to exchange their safety helmet voluntarily with a new one after the interview. Data analysis was carried out using SPSS. Chi square and logistic regression analysis was applied to determine the significance and odds ratio of the variables studied, respectively (penetration test, age, education level, knowledge, crash history, types of safety helmet, marital status and years of riding experience) against the presence of SIRIM label. The response rate for this study was 85.2%. The prevalence of non-standard helmets use amongst fast food delivery workers was 55.3%. Safety helmets that failed the penetration test had higher odds of being non-standard helmets compared with safety helmets passing the test. Types of safety helmet indicated half-shell safety helmets had higher odds to be non-standard safety helmets compared to full-shell safety helmets. Riders with more years of riding experience were in high odds of wearing non-standard safety helmets compared to riders with less riding experience. Non-standard (non-SIRIM approved) helmets were more likely to be half-shell helmets, were more likely to fail the standards penetration test, and were more likely to be worn by older, more experienced riders. The implications of these

78 FR 37397 - Small Business Size Standards: Agriculture, Forestry, Fishing and Hunting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-20

... Small Business Size Standards: Agriculture, Forestry, Fishing and Hunting AGENCY: U.S. Small Business... (NAICS) Sector 11, Agriculture, Forestry, Fishing and Hunting, and retaining the current standards for...-industries (``exceptions'') in NAICS Sector 11, Agriculture, Forestry, Fishing and Hunting, to determine...

75 FR 17036 - Energy Conservation Program: Energy Conservation Standards for Small Electric Motors; Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-05

... Conservation Program: Energy Conservation Standards for Small Electric Motors; Correction AGENCY: Office of... standards for small electric motors, which was published on March 9, 2010. In that final rule, the U.S... titled ``Energy Conservation Standards for Small Electric Motors.'' 75 FR 10874. Since the publication of...

10 CFR 431.446 - Small electric motors energy conservation standards and their effective dates.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 3 2011-01-01 2011-01-01 false Small electric motors energy conservation standards and... EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Small Electric Motors Energy Conservation Standards § 431.446 Small electric motors energy conservation standards and their effective dates. (a) Each...

Hydrogen Safety Issues Compared to Safety Issues with Methane andPropane

DOE Office of Scientific and Technical Information (OSTI.GOV)

Green, Michael A.

The hydrogen economy is not possible if the safety standards currently applied to liquid hydrogen and hydrogen gas by many laboratories are applied to devices that use either liquid or gaseous hydrogen. Methane and propane are commonly used by ordinary people without the special training. This report asks, 'How is hydrogen different from flammable gasses that are commonly being used all over the world?' This report compares the properties of hydrogen, methane and propane and how these properties may relate to safety when they are used in both the liquid and gaseous state. Through such an analysis, sensible safety standardsmore » for the large-scale (or even small-scale) use of liquid and gaseous hydrogen systems can be developed. This paper is meant to promote discussion of issues related to hydrogen safety so that engineers designing equipment can factor sensible safety standards into their designs.« less

Transportation of natural and other gases and liquids by pipeline occupational safety and health standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1979-05-17

The U.S. Materials Transportation Bureau (MTB) withdraws an advanced notice of proposed rulemaking (ANPR) which requested advice, recommendations, and information relating to the issuance of additional occupational safety and health standards for the protection of employees engaged in the construction, operation, and maintenance of pipeline systems and facilities used in the transportation of hazardous materials. Comments submitted in response to the ANPR indicated that the issuance of additional occupational safety and health standards by the MTB would be a duplication of the U.S. Occupational Safety and Health Administration's efforts and would increase the possibility of jurisdictional disputes. Since the MTB'smore » present standards development efforts are primarily directed at public safety (as opposed to occupational safety) by regulating pipeline design, construction, operation, and maintenance activities, the MTB withdraws the ANPR.« less

29 CFR 500.133 - Substantive Federal and State safety and health standards defined.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 3 2014-07-01 2014-07-01 false Substantive Federal and State safety and health standards defined. 500.133 Section 500.133 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION... Migrant Workers Housing Safety and Health § 500.133 Substantive Federal and State safety and health...

30 CFR 56.4402 - Safety can use.

Code of Federal Regulations, 2013 CFR

2013-07-01

... HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Fire Prevention and Control Flammable and Combustible Liquids and Gases § 56.4402 Safety can use. Small quantities of flammable liquids... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Safety can use. 56.4402 Section 56.4402 Mineral...

30 CFR 56.4402 - Safety can use.

Code of Federal Regulations, 2014 CFR

2014-07-01

... HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Fire Prevention and Control Flammable and Combustible Liquids and Gases § 56.4402 Safety can use. Small quantities of flammable liquids... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Safety can use. 56.4402 Section 56.4402 Mineral...

30 CFR 56.4402 - Safety can use.

Code of Federal Regulations, 2012 CFR

2012-07-01

... HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Fire Prevention and Control Flammable and Combustible Liquids and Gases § 56.4402 Safety can use. Small quantities of flammable liquids... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Safety can use. 56.4402 Section 56.4402 Mineral...

78 FR 73692 - Revisions to Safety Standards for Infant Bath Seats, Toddler Beds, and Full-Size Baby Cribs

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-09

... standard issued under the Danny Keysar Child Product Safety Notification Act was based, the revision... standard. Section 26(c) of the CPSA also provides that states or political subdivisions of states may apply... CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Parts 1215, 1217 and 1219 Revisions to Safety Standards...

75 FR 43823 - Safety Zone; He'eia Kea Small Boat Harbor, Kaneohe Bay, Oahu, HI

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-27

... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 165 [Docket No. USCG-2010-0458] RIN 1625-AA00 Safety Zone; He'eia Kea Small Boat Harbor, Kaneohe Bay, Oahu, HI AGENCY: Coast Guard, DHS. ACTION: Temporary Final Rule. SUMMARY: The Coast Guard is establishing a temporary safety zone in He'eia Kea Small...

78 FR 63019 - Safety Standard for Bassinets and Cradles

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-23

... directly attributable to product stability, the instability of the product, in many incidents, was to blame... stability test procedure, and (2) the addition of new provisions for a segmented mattress flatness test and a removable bed stability requirement. In this document, the Commission is issuing a safety standard...

42 CFR 486.108 - Condition for coverage: Safety standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 5 2011-10-01 2011-10-01 false Condition for coverage: Safety standards. 486.108 Section 486.108 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN... BY SUPPLIERS Conditions for Coverage: Portable X-Ray Services § 486.108 Condition for coverage...

78 FR 40443 - Submission for OMB Review; Comment Request-Recordkeeping Requirements Under the Safety Standard...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-05

... Request--Recordkeeping Requirements Under the Safety Standard for Infant Walkers AGENCY: Consumer Product... for infant walkers, 16 CFR part 1216. No comments were received in response to that notice. Therefore... has been incorporated by reference in the safety standard for infant walkers, 16 CFR part 1216...

77 FR 63800 - Proposed Extension of Approval of Information Collection; Comment Request-Safety Standard for...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-17

... CONSUMER PRODUCT SAFETY COMMISSION Proposed Extension of Approval of Information Collection; Comment Request--Safety Standard for Walk-Behind Power Lawn Mowers AGENCY: Consumer Product Safety.... Chapter 35), the Consumer Product Safety Commission (CPSC) requested comments on a proposed extension of...

Edible safety requirements and assessment standards for agricultural genetically modified organisms.

PubMed

Deng, Pingjian; Zhou, Xiangyang; Zhou, Peng; Du, Zhong; Hou, Hongli; Yang, Dongyan; Tan, Jianjun; Wu, Xiaojin; Zhang, Jinzhou; Yang, Yongcun; Liu, Jin; Liu, Guihua; Li, Yonghong; Liu, Jianjun; Yu, Lei; Fang, Shisong; Yang, Xiaoke

2008-05-01

This paper describes the background, principles, concepts and methods of framing the technical regulation for edible safety requirement and assessment of agricultural genetically modified organisms (agri-GMOs) for Shenzhen Special Economic Zone in the People's Republic of China. It provides a set of systematic criteria for edible safety requirements and the assessment process for agri-GMOs. First, focusing on the degree of risk and impact of different agri-GMOs, we developed hazard grades for toxicity, allergenicity, anti-nutrition effects, and unintended effects and standards for the impact type of genetic manipulation. Second, for assessing edible safety, we developed indexes and standards for different hazard grades of recipient organisms, for the influence of types of genetic manipulation and hazard grades of agri-GMOs. To evaluate the applicability of these criteria and their congruency with other safety assessment systems for GMOs applied by related organizations all over the world, we selected some agri-GMOs (soybean, maize, potato, capsicum and yeast) as cases to put through our new assessment system, and compared our results with the previous assessments. It turned out that the result of each of the cases was congruent with the original assessment.

40 CFR 80.240 - What are the small refiner gasoline sulfur standards?

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 17 2013-07-01 2013-07-01 false What are the small refiner gasoline... (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Gasoline Sulfur Hardship Provisions § 80.240 What are the small refiner gasoline sulfur standards? (a) The gasoline sulfur standards...

40 CFR 80.240 - What are the small refiner gasoline sulfur standards?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 16 2010-07-01 2010-07-01 false What are the small refiner gasoline... (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Gasoline Sulfur Hardship Provisions § 80.240 What are the small refiner gasoline sulfur standards? (a) The gasoline sulfur standards...

40 CFR 80.240 - What are the small refiner gasoline sulfur standards?

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 17 2012-07-01 2012-07-01 false What are the small refiner gasoline... (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Gasoline Sulfur Hardship Provisions § 80.240 What are the small refiner gasoline sulfur standards? (a) The gasoline sulfur standards...

40 CFR 80.240 - What are the small refiner gasoline sulfur standards?

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 17 2014-07-01 2014-07-01 false What are the small refiner gasoline... (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Gasoline Sulfur Hardship Provisions § 80.240 What are the small refiner gasoline sulfur standards? (a) The gasoline sulfur standards...

40 CFR 80.240 - What are the small refiner gasoline sulfur standards?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 16 2011-07-01 2011-07-01 false What are the small refiner gasoline... (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Gasoline Sulfur Hardship Provisions § 80.240 What are the small refiner gasoline sulfur standards? (a) The gasoline sulfur standards...

Analysis of Managing Safety in Small Enterprises: Dual-Effects of Employee Prosocial Safety Behavior and Government Inspection

PubMed Central

2018-01-01

This paper aims to promote a national and international occupational health and safety (OHS) intervention for small and medium enterprises (SMEs) within internal and external resources. Based on the characteristics of small SME management, the work environment and occupational health may be positively affected by the dual-effects of employees and government. Evolutionary game theory is utilized to identify relevant interactions among the government, small enterprises, and employees. Furthermore, dynamic simulations of the evolutionary game model are used to explore stability strategies and to identify modes of equilibrium. PMID:29707574

Safety management practices in small and medium enterprises in India.

PubMed

Unnikrishnan, Seema; Iqbal, Rauf; Singh, Anju; Nimkar, Indrayani M

2015-03-01

Small and medium enterprises (SMEs) are often the main pillar of an economy. Minor accidents, ergonomics problems, old and outdated machinery, and lack of awareness have created a need for implementation of safety practices in SMEs. Implementation of healthy working conditions creates positive impacts on economic and social development. In this study, a questionnaire was developed and administered to 30 randomly chosen SMEs in and around Mumbai, Maharashtra, and other states in India to evaluate safety practices implemented in their facilities. The study also looked into the barriers and drivers for technology innovation and suggestions were also received from the respondent SMEs for best practices on safety issues. In some SMEs, risks associated with safety issues were increased whereas risks were decreased in others. Safety management practices are inadequate in most SMEs. Market competitiveness, better efficiency, less risk, and stringent laws were found to be most significant drivers; and financial constraints, lack of awareness, resistance to change, and lack of training for employees were found to be main barriers. Competition between SMEs was found to be major reason for implementation of safety practices in the SMEs. The major contribution of the study has been awareness building on safety issues in the SMEs that participated in the project.

Safety Management Practices in Small and Medium Enterprises in India

PubMed Central

Unnikrishnan, Seema; Iqbal, Rauf; Singh, Anju; Nimkar, Indrayani M.

2014-01-01

Background Small and medium enterprises (SMEs) are often the main pillar of an economy. Minor accidents, ergonomics problems, old and outdated machinery, and lack of awareness have created a need for implementation of safety practices in SMEs. Implementation of healthy working conditions creates positive impacts on economic and social development. Methods In this study, a questionnaire was developed and administered to 30 randomly chosen SMEs in and around Mumbai, Maharashtra, and other states in India to evaluate safety practices implemented in their facilities. The study also looked into the barriers and drivers for technology innovation and suggestions were also received from the respondent SMEs for best practices on safety issues. Results In some SMEs, risks associated with safety issues were increased whereas risks were decreased in others. Safety management practices are inadequate in most SMEs. Market competitiveness, better efficiency, less risk, and stringent laws were found to be most significant drivers; and financial constraints, lack of awareness, resistance to change, and lack of training for employees were found to be main barriers. Conclusion Competition between SMEs was found to be major reason for implementation of safety practices in the SMEs. The major contribution of the study has been awareness building on safety issues in the SMEs that participated in the project. PMID:25830070

Forest management practices and the occupational safety and health administration logging standard

Treesearch

John R. Myers; David Elton Fosbroke

1995-01-01

The Occupational Safety and Health Administration (OSHA) has established safety and health regulations for the logging industry. These new regulations move beyond the prior OSHA pulpwood harvesting standard by including sawtimber harvesting operations. Because logging is a major tool used by forest managers to meet silvicultural goals, managers must be aware of what...

A study of Michigan safety belt use prior to implementation of standard enforcement

DOT National Transportation Integrated Search

2000-02-01

Reported here are the results of a direct observation survey of safety belt use conducted in January 2000 to provide a baseline rate from which to measure safety belt use trends following the implementation of standard enforcement in Michigan. In thi...

10 CFR 431.446 - Small electric motors energy conservation standards and their effective dates. [Reserved

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Small electric motors energy conservation standards and... CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Small Electric Motors Energy Conservation Standards § 431.446 Small electric motors energy conservation standards and their...

75 FR 27734 - Agency Information Collection Activities; Proposed Collection; Comment Request; Safety Standard...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-18

... Glatz, Division of Policy and Planning, Office of Information Technology, Consumer Product Safety... appropriate, and other forms of information technology. Title: Safety Standard for Bicycle Helmets--16 CFR... and process for Commission acceptance of accreditation of third party conformity assessment bodies for...

The Road to Psychological Safety: Legal, Scientific, and Social Foundations for a Canadian National Standard on Psychological Safety in the Workplace

ERIC Educational Resources Information Center

Shain, Martin; Arnold, Ian; GermAnn, Kathy

2012-01-01

In Part 1 of this article, the legal and scientific origins of the concept of psychological safety are examined as background to, and support for, the new Canadian National Standard on Psychological Health and Safety in the Workplace (CSA Z1003/BNQ 9700). It is shown that five factors influencing psychological safety can be identified as being…

Food safety systems in a small dairy factory: implementation, major challenges, and assessment of systems' performances.

PubMed

Cusato, Sueli; Gameiro, Augusto H; Corassin, Carlos H; Sant'ana, Anderson S; Cruz, Adriano G; Faria, José de Assis F; de Oliveira, Carlos Augusto F

2013-01-01

The present study describes the implementation of a food safety system in a dairy processing plant located in the State of São Paulo, Brazil, and the challenges found during the process. In addition, microbiological indicators have been used to assess system's implementation performance. The steps involved in the implementation of a food safety system included a diagnosis of the prerequisites, implementation of the good manufacturing practices (GMPs), sanitation standard operating procedures (SSOPs), training of the food handlers, and hazard analysis and critical control point (HACCP). In the initial diagnosis, conformity with 70.7% (n=106) of the items analyzed was observed. A total of 12 critical control points (CCPs) were identified: (1) reception of the raw milk, (2) storage of the raw milk, (3 and 4) reception of the ingredients and packaging, (5) milk pasteurization, (6 and 7) fermentation and cooling, (8) addition of ingredients, (9) filling, (10) storage of the finished product, (11) dispatching of the product, and (12) sanitization of the equipment. After implementation of the food safety system, a significant reduction in the yeast and mold count was observed (p<0.05). The main difficulties encountered for the implementation of food safety system were related to the implementation of actions established in the flow chart and to the need for constant training/adherence of the workers to the system. Despite this, the implementation of the food safety system was shown to be challenging, but feasible to be reached by small-scale food industries.

75 FR 4703 - Track Safety Standards; Continuous Welded Rail (CWR)

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-29

... DEPARTMENT OF TRANSPORTATION Federal Railroad Administration 49 CFR Part 213 [Docket No. FRA-2008-0036] RIN 2130-AB90 Track Safety Standards; Continuous Welded Rail (CWR) AGENCY: Federal Railroad Administration (FRA), Department of Transportation (DOT). ACTION: Final rule; response to petition for...

Public Safety Standards for the Launch and Entry of Spacecraft

NASA Astrophysics Data System (ADS)

Wilde, Paul; Van Suetendael, Richard; Hallock, James; Larson, Erik

2005-12-01

This paper describes elements of the US government's response to the Space Shuttle Columbia accident and other actions recently taken, relevant to public safety during launch and entry of spacecraft. The Columbia accident generated numerous debris impacts capable of causing public harm, including major property damage as well as serious injury to members of the public on the ground, in aircraft, and on waterborne vessels. The Columbia Accident Investigation Board (CAIB) commissioned an analysis by ACTA Inc. that found the lack of reported casualties on the ground was a reasonably expected result based on the recovered debris data, census data, and mathematical methods consistent with current standards for launch debris risk analyses. [1, 2] A more detailed aircraft risk analysis, funded by the Federal Aviation Administration (FAA), used the actual records of aircraft activity at the time of the accident, and found that the probability of an impact by Columbia debris to commercial aircraft in the vicinity was at least one in a thousand, and the chance of an impact to general aviation was at least one in a hundred. [3] After FAA executives were briefed about the potential for aircraft impacts during the Columbia accident, and the challenges presented by integration of innovative vehicles such as SpaceShipOne into the National Airspace System (NAS), the FAA began to investigate a decision support tool to better manage the interface of space and air traffic in the future. In addition, the FAA asked the Common Standards Working Group (CSWG) to investigate risk and air traffic management issues that arise in the event of space vehicle accidents and to develop safety standards to govern the interface between space and air traffic. Most recently, the FAA funded a study of aircraft risk around operating areas for future flights of suborbital rockets that may be authorized by an Experimental Permit (EP). Congress mandated that the FAA develop the EP regime as a streamlined

[A simplified occupational health and safety management system designed for small enterprises. Initial validation results].

PubMed

Bacchi, Romana; Veneri, L; Ghini, P; Caso, Maria Alessandra; Baldassarri, Giovanna; Renzetti, F; Santarelli, R

2009-01-01

Occupational Health and Safety Management Systems (OHSMS) are known to be effective in improving safety at work. Unfortunately they are often too resource-heavy for small businesses. The aim of this project was to develop and test a simplified model of OHSMS suitable for small enterprises. The model consists of 7 procedures and various operating forms and check lists, that guide the enterprise in managing safety at work. The model was tested in 15 volunteer enterprises. In most of the enterprises two audits showed increased awareness and participation of workers; better definition and formalisation of respon sibilities in 8 firms; election of Union Safety Representatives in over one quarter of the enterprises; improvement of safety equipment. The study also helped identify areas where the model could be improved by simplification of unnecessarily complex and redundant procedures.

78 FR 42817 - Small Business Size Standards: Waiver of the Nonmanufacturer Rule

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-17

... SMALL BUSINESS ADMINISTRATION Small Business Size Standards: Waiver of the Nonmanufacturer Rule AGENCY: U.S. Small Business Administration. ACTION: Notice of intent to rescind the class waiver of the... Manufacturing. SUMMARY: The U. S. Small Business Administration (SBA) intends to rescind a class waiver of the...

77 FR 73354 - Safety Standard for Hand-Held Infant Carriers

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-10

.... Edwards, Project Manager, Directorate for Engineering Sciences, U.S. Consumer Product Safety Commission, 5..., allergic reactions and near- choking episodes are the most common injuries reported in the remaining 58... modification of the ASTM standard to address the requirements for flammability, surface chemicals, cords...

77 FR 63800 - Proposed Extension of Approval of Information Collection; Comment Request-Safety Standard for...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-17

... CONSUMER PRODUCT SAFETY COMMISSION Proposed Extension of Approval of Information Collection; Comment Request--Safety Standard for Automatic Residential Garage Door Operators AGENCY: Consumer Product... 1995 (44 U.S.C. Chapter 35), the Consumer Product Safety Commission (CPSC) requested comments on a...

75 FR 21567 - Federal Motor Vehicle Safety Standard No. 108; Lamp, Reflective Devices and Associated Equipment...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-26

... Federal Motor Vehicle Safety Standard No. 108; Lamp, Reflective Devices and Associated Equipment; Denial... Motor Vehicle Safety Standard (FMVSS) No. 108; Lamps, reflective devices, and associated equipment... physical filaments in the lamp. Specifically, BMW requested that paragraph S10.17.1.1.2 \\4\\ of the...

Research and development of a safety standard for workstation tables in the United States

DOT National Transportation Integrated Search

2013-02-21

The US safety standard for workstation tables is presented to an international audience, : such that rail operators and equipment manufacturers may better understand the research : behind the requirements, the process through which the safety standar...

Safety in construction--a comprehensive description of the characteristics of high safety standards in construction work, from the combined perspective of supervisors and experienced workers.

PubMed

Törner, Marianne; Pousette, Anders

2009-01-01

The often applied engineering approach to safety management in the construction industry needs to be supplemented by organizational measures and measures based on how people conceive and react to their social environment. This requires in-depth knowledge of the broad preconditions for high safety standards in construction. The aim of the study was to comprehensively describe the preconditions and components of high safety standards in the construction industry from the perspective of both experienced construction workers and first-line managers. Five worker safety representatives and 19 first-line managers were interviewed, all strategically selected from within a large Swedish construction project. Phenomenographic methodology was used for data acquisition and analysis and to categorize the information. Nine informants verified the results. The study identified four main categories of work safety preconditions and components: (1) Project characteristics and nature of the work, which set the limits of safety management; (2) Organization and structures, with the subcategories planning, work roles, procedures, and resources; (3) Collective values, norms, and behaviors, with the subcategories climate and culture, and interaction and cooperation; and (4) Individual competence and attitudes, with the subcategories knowledge, ability and experience, and individual attitudes. The results comprehensively describe high safety standards in construction, incorporating organizational, group, individual, and technical aspects. High-quality interaction between different organizational functions and hierarchical levels stood out as important aspects of safety. The results are discussed in relation to previous research into safety and into the social-psychological preconditions for other desired outcomes in occupational settings. The results can guide construction companies in planning and executing construction projects to a high safety standard.

[Qualitative evaluation of employer requirements associated with occupational health and safety as good practice in small-scale enterprises].

PubMed

Kuroki, Naomi; Miyashita, Nana; Hino, Yoshiyuki; Kayashima, Kotaro; Fujino, Yoshihisa; Takada, Mikio; Nagata, Tomohisa; Yamataki, Hajime; Sakuragi, Sonoko; Kan, Hirohiko; Morita, Tetsuya; Ito, Akiyoshi; Mori, Koji

2009-09-01

The purpose of this study was to identify what motivates employers to promote good occupational health and safety practices in small-scale enterprises. Previous studies have shown that small-scale enterprises generally pay insufficient attention to issues of occupational health and safety. These findings were mainly derived from questionnaire based surveys. Nevertheless, some small-scale enterprises in which employers exercise good leadership do take a progressive approach to occupational health and safety. Although good practices can be identified in small-scale enterprises, it remains unclear what motivates employers in small-scale enterprises to actively implement occupational health and safety practices. We speculated that identifying employer motivations in promoting occupational health would help to spread good practices among small-scale enterprises. Using a qualitative approach based on the KJ methods, we interviewed ten employers who actively promote occupational health and safety in the workplace. The employers were asked to discuss their views of occupational health and safety in their own words. A semi-structured interview format was used, and transcripts were made of the interviews. Each transcript was independently coded by two or more researchers. These transcripts and codes were integrated and then the research group members discussed the heading titles and structural relationships between them according to the KJ method. Qualitative analysis revealed that all the employers expressed a strong interest in a "good company" and "good management". They emphasized four elements of "good management", namely "securing human resources", "trust of business partners", "social responsibility" and "employer's health condition itself", and considered that addressing occupational health and safety was essential to the achievement of these four elements. Consistent with previous findings, the results showed that implementation of occupational health and safety

Effectiveness of health and safety in small enterprises: a systematic review of quantitative evaluations of interventions.

PubMed

Breslin, F Curtis; Kyle, Natasha; Bigelow, Philip; Irvin, Emma; Morassaei, Sara; MacEachen, Ellen; Mahood, Quenby; Couban, Rachel; Shannon, Harry; Amick, Benjamin C

2010-06-01

This systematic review was conducted to identify effective occupational health and safety interventions for small businesses. The review focused on peer-reviewed intervention studies conducted in small businesses with 100 or fewer employees, that were published in English and several other languages, and that were not limited by publication date. Multidisciplinary members of the review team identified relevant articles and assessed their quality. Studies assessed as medium or high quality had data extracted, which was then synthesized. Five studies were deemed of medium or high quality, and proceeded to data extraction and evidence synthesis. The types of interventions identified: a combination of training and safety audits; and a combination of engineering, training, safety audits, and a motivational component, showed a limited amount of evidence in improving safety outcomes. Overall, this evidence synthesis found a moderate level of evidence for intervention effectiveness, and found no evidence that any intervention had adverse effects. Even though there were few studies that adequately evaluated small business intervention, several studies demonstrate that well-designed evaluations are possible with small businesses. While stronger levels of evidence are required to make recommendations, these interventions noted above were associated with positive changes in safety-related attitudes and beliefs and workplace parties should be aware of them.

77 FR 22564 - Proposed Collection; Comment Request; Safety Standards for Full-Size Baby Cribs and Non-Full-Size...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-16

... child care centers' compliance with the recent CPSC safety standards for full-size and non-full-size... CONSUMER PRODUCT SAFETY COMMISSION [Docket No. CPSC-2012-0019] Proposed Collection; Comment Request; Safety Standards for Full- Size Baby Cribs and Non-Full-Size Baby Cribs; Compliance Form AGENCY...

77 FR 75600 - Policy Statement on Occupational Safety and Health Standards for Aircraft Cabin Crewmembers...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-21

... [Docket No. FAA-2012-0953] Policy Statement on Occupational Safety and Health Standards for Aircraft Cabin... announced a proposed policy statement regarding the regulation of some occupational safety and health conditions affecting cabin crewmembers on aircraft by the Occupational Safety and Health Administration. The...

Is it time to reassess current safety standards for glyphosate-based herbicides?

PubMed Central

Blumberg, Bruce; Antoniou, Michael N; Benbrook, Charles M; Carroll, Lynn; Colborn, Theo; Everett, Lorne G; Hansen, Michael; Landrigan, Philip J; Lanphear, Bruce P; Mesnage, Robin; vom Saal, Frederick S; Welshons, Wade V; Myers, John Peterson

2017-01-01

Use of glyphosate-based herbicides (GBHs) increased ∼100-fold from 1974 to 2014. Additional increases are expected due to widespread emergence of glyphosate-resistant weeds, increased application of GBHs, and preharvest uses of GBHs as desiccants. Current safety assessments rely heavily on studies conducted over 30 years ago. We have considered information on GBH use, exposures, mechanisms of action, toxicity and epidemiology. Human exposures to glyphosate are rising, and a number of in vitro and in vivo studies challenge the basis for the current safety assessment of glyphosate and GBHs. We conclude that current safety standards for GBHs are outdated and may fail to protect public health or the environment. To improve safety standards, the following are urgently needed: (1) human biomonitoring for glyphosate and its metabolites; (2) prioritisation of glyphosate and GBHs for hazard assessments, including toxicological studies that use state-of-the-art approaches; (3) epidemiological studies, especially of occupationally exposed agricultural workers, pregnant women and their children and (4) evaluations of GBHs in commercially used formulations, recognising that herbicide mixtures likely have effects that are not predicted by studying glyphosate alone. PMID:28320775

National Highway Traffic Safety Administration Corporate Average Fuel Economy (CAFE) Standards

DOT National Transportation Integrated Search

2003-01-01

The National Highway Traffic Safety Administration (NHTSA) must set Corporate Average Fuel Economy (CAFE) standards for light trucks. This was authorized by the Energy Policy and Conservation Act, which added Title V: Imporving Automotive Fuel Effici...

National Machine Guarding Program: Part 2. Safety management in small metal fabrication enterprises.

PubMed

Parker, David L; Yamin, Samuel C; Brosseau, Lisa M; Xi, Min; Gordon, Robert; Most, Ivan G; Stanley, Rodney

2015-11-01

Small manufacturing businesses often lack important safety programs. Many reasons have been set forth on why this has remained a persistent problem. The National Machine Guarding Program (NMGP) was a nationwide intervention conducted in partnership with two workers' compensation insurers. Insurance safety consultants collected baseline data in 221 business using a 33-question safety management audit. Audits were completed during an interview with the business owner or manager. Most measures of safety management improved with an increasing number of employees. This trend was particularly strong for lockout/tagout. However, size was only significant for businesses without a safety committee. Establishments with a safety committee scored higher (55% vs. 36%) on the safety management audit compared with those lacking a committee (P < 0.0001). Critical safety management programs were frequently absent. A safety committee appears to be a more important factor than business size in accounting for differences in outcome measures. © 2015 The Authors. American Journal of Industrial Medicine Published by Wiley Periodicals, Inc.

Electrical safety of conducted electrical weapons relative to requirements of relevant electrical standards.

PubMed

Panescu, Dorin; Nerheim, Max; Kroll, Mark

2013-01-01

TASER(®) conducted electrical weapons (CEW) deliver electrical pulses that can inhibit a person's neuromuscular control or temporarily incapacitate. TASER X26, X26P, and X2 are among CEW models most frequently deployed by law enforcement agencies. The X2 CEW uses two cartridge bays while the X26 and X26P CEWs have only one. The TASER X26P CEW electronic output circuit design is equivalent to that of any one of the two TASER X2 outputs. The goal of this paper was to analyze the nominal electrical outputs of TASER X26, X26P, and X2 CEWs in reference to provisions of several international standards that specify safety requirements for electrical medical devices and electrical fences. Although these standards do not specifically mention CEWs, they are the closest electrical safety standards and hence give very relevant guidance. The outputs of two TASER X26 and two TASER X2 CEWs were measured and confirmed against manufacturer and other published specifications. The TASER X26, X26P, and X2 CEWs electrical output parameters were reviewed against relevant safety requirements of UL 69, IEC 60335-2-76 Ed 2.1, IEC 60479-1, IEC 60479-2, AS/NZS 60479.1, AS/NZS 60479.2 and IEC 60601-1. Prior reports on similar topics were reviewed as well. Our measurements and analyses confirmed that the nominal electrical outputs of TASER X26, X26P and X2 CEWs lie within safety bounds specified by relevant requirements of the above standards.

78 FR 70415 - Federal Motor Vehicle Safety Standards; Occupant Crash Protection

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-25

...Completing the first initiative of NHTSA's 2007 ``NHTSA's Approach to Motorcoach Safety'' plan and one of the principal undertakings of DOT's 2009 Motorcoach Safety Action Plan, and fulfilling a statutory mandate of the Motorcoach Enhanced Safety Act of 2012, incorporated into the Moving Ahead for Progress in the 21st Century Act, this final rule amends the Federal motor vehicle safety standard (FMVSS) on occupant crash protection to require lap/shoulder seat belts for each passenger seating position in all new over-the-road buses, and in new buses other than over-the-road buses with a gross vehicle weight rating (GVWR) greater than 11,793 kilograms (kg) (26,000 pounds (lb), with certain exclusions. By requiring the passenger lap/ shoulder seat belts, this final rule significantly reduces the risk of fatality and serious injury in frontal crashes and the risk of occupant ejection in rollovers, thus considerably enhancing the safety of these vehicles.

77 FR 72998 - Policy Statement on Occupational Safety and Health Standards for Aircraft Cabin Crewmembers

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-07

... aircraft by the Occupational Safety and Health Administration (OSHA). This policy statement will enhance occupational safety and health in the aircraft cabin by establishing the extent to which OSHA requirements may... [Docket No.: FAA-2012-0953] Policy Statement on Occupational Safety and Health Standards for Aircraft...

78 FR 20371 - Small Business Size Standards; Waiver of the Nonmanufacturer Rule

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-04

... SMALL BUSINESS ADMINISTRATION Small Business Size Standards; Waiver of the Nonmanufacturer Rule AGENCY: U.S. Small Business Administration. ACTION: On April 16, 2001, SBA granted a Class Waiver of the Nonmanufacturer Rule (NMR) for Aerospace Ball and Roller Bearings, North American Industry Classification System...

48 CFR 22.403-3 - Contract Work Hours and Safety Standards Act.

Code of Federal Regulations, 2010 CFR

2010-10-01

... workweek unless paid for all additional hours at not less than 11/2 times the basic rate of pay (see 22.301... Standards for Contracts Involving Construction 22.403-3 Contract Work Hours and Safety Standards Act. The... 22.305) contain a clause (see 52.222-4) specifying that no laborer or mechanic doing any part of the...

49 CFR Appendix C to Part 238 - Suspension System Safety Performance Standards

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Suspension System Safety Performance Standards C... industry standard acceptable to FRA is developed and approved under the procedures provided in § 238.21. (a... as follows: ER12MY99.005 where: δ=flange angle (deg). μ=coefficient of friction of 0.5. (2) The net...

49 CFR Appendix C to Part 238 - Suspension System Safety Performance Standards

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 4 2012-10-01 2012-10-01 false Suspension System Safety Performance Standards C... industry standard acceptable to FRA is developed and approved under the procedures provided in § 238.21. (a... as follows: ER12MY99.005 where: δ=flange angle (deg). μ=coefficient of friction of 0.5. (2) The net...

78 FR 55137 - Federal Motor Vehicle Safety Standards; Ejection Mitigation

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-09

...This document responds to petitions for reconsideration of a 2011 final rule that established Federal Motor Vehicle Safety Standard (FMVSS) No. 226, ``Ejection mitigation.'' The standard is intended to reduce complete and partial ejections of vehicle occupants through side windows in crashes, particularly rollover crashes. Generally, the issues raised by the petitioners are of two types. The petitioners ask for reconsideration of policy issues relating to the agency's implementation of the standard, and of technical issues concerning engineering aspects of the rule, particularly as to how the compliance test procedure should be conducted or improved. Most of the requested changes were of the latter type. In general, NHTSA is denying the petitions for reconsideration. The few changes we have made in response to the petitions are minor, mostly to clarify the requirements of the standard.

77 FR 45242 - Revisions to Safety Standards for Durable Infant or Toddler Products: Infant Bath Seats and Full...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-31

... direction in the Danny Keysar Child Product Safety Notification Act to issue standards for durable infant or... not usually subject to CPSC's standards, such as child care facilities, family child care homes, and... standard issued under the Danny Keysar Child Product Safety Notification Act was based, the revision...

75 FR 81765 - Safety Standards for Full-Size Baby Cribs and Non-Full-Size Baby Cribs; Final Rule

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-28

...Section 104(b) of the Consumer Product Safety Improvement Act of 2008 (``CPSIA'') requires the United States Consumer Product Safety Commission (``CPSC,'' ``Commission,'' or ``we'') to promulgate consumer product safety standards for durable infant or toddler products. These standards are to be ``substantially the same as'' applicable voluntary standards or more stringent than the voluntary standard if the Commission concludes that more stringent requirements would further reduce the risk of injury associated with the product. The Commission is issuing safety standards for full-size and non-full-size baby cribs in response to the direction under section 104(b) of the CPSIA.\\1\\ Section 104(c) of the CPSIA specifies that the crib standards will cover used as well as new cribs. The crib standards will apply to anyone who manufactures, distributes, or contracts to sell a crib; to child care facilities, family child care homes, and others holding themselves out to be knowledgeable about cribs; to anyone who leases, sublets, or otherwise places a crib in the stream of commerce; and to owners and operators of places of public accommodation affecting commerce. ---------------------------------------------------------------------------

A Comprehensive Review of Spirit Drink Safety Standards and Regulations from an International Perspective.

PubMed

Pang, Xiao-Na; Li, Zhao-Jie; Chen, Jing-Yu; Gao, Li-Juan; Han, Bei-Zhong

2017-03-01

Standards and regulations related to spirit drinks have been established by different countries and international organizations to ensure the safety and quality of spirits. Here, we introduce the principles of food safety and quality standards for alcoholic beverages and then compare the key indicators used in the distinct standards of the Codex Alimentarius Commission, the European Union, the People's Republic of China, the United States, Canada, and Australia. We also discuss in detail the "maximum level" of the following main contaminants of spirit drinks: methanol, higher alcohols, ethyl carbamate, hydrocyanic acid, heavy metals, mycotoxins, phthalates, and aldehydes. Furthermore, the control measures used for potential hazards are introduced. Harmonization of the current requirements based on comprehensive scope analysis and the risk assessment approach will enhance both the trade and quality of distilled spirits. This review article provides valuable information that will enable producers, traders, governments, and researchers to increase their knowledge of spirit drink safety requirements, control measures, and research trends.

76 FR 10524 - Federal Motor Vehicle Safety Standards, Ejection Mitigation; Phase-In Reporting Requirements...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-25

... DEPARTMENT OF TRANSPORTATION National Highway Traffic Safety Administration 49 CFR Parts 571 and 585 [Docket No. NHTSA-2011-0004] RIN 2127-AK23 Federal Motor Vehicle Safety Standards, Ejection Mitigation; Phase-In Reporting Requirements; Incorporation by Reference Correction In rule document 2011-547...

38 CFR 17.155 - Minimum standards of safety and quality for automotive adaptive equipment.

Code of Federal Regulations, 2012 CFR

2012-07-01

... safety and quality for automotive adaptive equipment. 17.155 Section 17.155 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS MEDICAL Automotive Equipment and Driver Training § 17.155 Minimum standards of safety and quality for automotive adaptive equipment. (a) The Under Secretary for...

38 CFR 17.155 - Minimum standards of safety and quality for automotive adaptive equipment.

Code of Federal Regulations, 2014 CFR

2014-07-01

... safety and quality for automotive adaptive equipment. 17.155 Section 17.155 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS MEDICAL Automotive Equipment and Driver Training § 17.155 Minimum standards of safety and quality for automotive adaptive equipment. (a) The Under Secretary for...

38 CFR 17.155 - Minimum standards of safety and quality for automotive adaptive equipment.

Code of Federal Regulations, 2011 CFR

2011-07-01

... safety and quality for automotive adaptive equipment. 17.155 Section 17.155 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS MEDICAL Automotive Equipment and Driver Training § 17.155 Minimum standards of safety and quality for automotive adaptive equipment. (a) The Under Secretary for...

38 CFR 17.155 - Minimum standards of safety and quality for automotive adaptive equipment.

Code of Federal Regulations, 2013 CFR

2013-07-01

... safety and quality for automotive adaptive equipment. 17.155 Section 17.155 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS MEDICAL Automotive Equipment and Driver Training § 17.155 Minimum standards of safety and quality for automotive adaptive equipment. (a) The Under Secretary for...

78 FR 49996 - Pipeline Safety: Periodic Updates of Regulatory References to Technical Standards and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-16

..., natural gas and other types of materials transported by pipeline, it is not possible to establish... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Parts..., Transportation of Natural and Other Gas by Pipeline: Minimum Federal Safety Standards; 49 CFR part 193, Liquefied...

48 CFR 852.222-70 - Contract Work Hours and Safety Standards Act-nursing home care contract supplement.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Safety Standards Act-nursing home care contract supplement. 852.222-70 Section 852.222-70 Federal...—nursing home care contract supplement. As prescribed in 822.305, for nursing home care requirements, insert the following clause: Contract Work Hours and Safety Standards Act—Nursing Home Care Contract...

48 CFR 852.222-70 - Contract Work Hours and Safety Standards Act-nursing home care contract supplement.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Safety Standards Act-nursing home care contract supplement. 852.222-70 Section 852.222-70 Federal...—nursing home care contract supplement. As prescribed in 822.305, for nursing home care requirements, insert the following clause: Contract Work Hours and Safety Standards Act—Nursing Home Care Contract...

48 CFR 852.222-70 - Contract Work Hours and Safety Standards Act-nursing home care contract supplement.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Safety Standards Act-nursing home care contract supplement. 852.222-70 Section 852.222-70 Federal...—nursing home care contract supplement. As prescribed in 822.305, for nursing home care requirements, insert the following clause: Contract Work Hours and Safety Standards Act—Nursing Home Care Contract...

48 CFR 852.222-70 - Contract Work Hours and Safety Standards Act-nursing home care contract supplement.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Safety Standards Act-nursing home care contract supplement. 852.222-70 Section 852.222-70 Federal...—nursing home care contract supplement. As prescribed in 822.305, for nursing home care requirements, insert the following clause: Contract Work Hours and Safety Standards Act—Nursing Home Care Contract...

48 CFR 852.222-70 - Contract Work Hours and Safety Standards Act-nursing home care contract supplement.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Safety Standards Act-nursing home care contract supplement. 852.222-70 Section 852.222-70 Federal...—nursing home care contract supplement. As prescribed in 822.305, for nursing home care requirements, insert the following clause: Contract Work Hours and Safety Standards Act—Nursing Home Care Contract...

49 CFR 231.35 - Procedure for modification of an approved industry safety appliance standard for new railcar...

Code of Federal Regulations, 2013 CFR

2013-10-01

... industry safety appliance standard for new construction of railroad cars, locomotives, tenders, or other... 49 Transportation 4 2013-10-01 2013-10-01 false Procedure for modification of an approved industry... TRANSPORTATION RAILROAD SAFETY APPLIANCE STANDARDS § 231.35 Procedure for modification of an approved industry...

49 CFR 231.35 - Procedure for modification of an approved industry safety appliance standard for new railcar...

Code of Federal Regulations, 2014 CFR

2014-10-01

... industry safety appliance standard for new construction of railroad cars, locomotives, tenders, or other... 49 Transportation 4 2014-10-01 2014-10-01 false Procedure for modification of an approved industry... TRANSPORTATION RAILROAD SAFETY APPLIANCE STANDARDS § 231.35 Procedure for modification of an approved industry...

49 CFR 231.35 - Procedure for modification of an approved industry safety appliance standard for new railcar...

Code of Federal Regulations, 2012 CFR

2012-10-01

... industry safety appliance standard for new construction of railroad cars, locomotives, tenders, or other... 49 Transportation 4 2012-10-01 2012-10-01 false Procedure for modification of an approved industry... TRANSPORTATION RAILROAD SAFETY APPLIANCE STANDARDS § 231.35 Procedure for modification of an approved industry...

49 CFR 231.35 - Procedure for modification of an approved industry safety appliance standard for new railcar...

Code of Federal Regulations, 2011 CFR

2011-10-01

... industry safety appliance standard for new construction of railroad cars, locomotives, tenders, or other... 49 Transportation 4 2011-10-01 2011-10-01 false Procedure for modification of an approved industry... TRANSPORTATION RAILROAD SAFETY APPLIANCE STANDARDS § 231.35 Procedure for modification of an approved industry...

National machine guarding program: Part 2. Safety management in small metal fabrication enterprises

PubMed Central

Yamin, Samuel C.; Brosseau, Lisa M.; Xi, Min; Gordon, Robert; Most, Ivan G.; Stanley, Rodney

2015-01-01

Background Small manufacturing businesses often lack important safety programs. Many reasons have been set forth on why this has remained a persistent problem. Methods The National Machine Guarding Program (NMGP) was a nationwide intervention conducted in partnership with two workers' compensation insurers. Insurance safety consultants collected baseline data in 221 business using a 33‐question safety management audit. Audits were completed during an interview with the business owner or manager. Results Most measures of safety management improved with an increasing number of employees. This trend was particularly strong for lockout/tagout. However, size was only significant for businesses without a safety committee. Establishments with a safety committee scored higher (55% vs. 36%) on the safety management audit compared with those lacking a committee (P < 0.0001). Conclusions Critical safety management programs were frequently absent. A safety committee appears to be a more important factor than business size in accounting for differences in outcome measures. Am. J. Ind. Med. 58:1184–1193, 2015. © 2015 The Authors. American Journal of Industrial Medicine Published by Wiley Periodicals, Inc. PMID:26345591

Towards safety, hygiene and environmental (SHE) management in African small and medium companies.

PubMed

Meité, Vaflahi; Baeyens, Jan; Dewil, Raf

2009-03-01

Although Safety, Health and Environment (SHE) principles are adhered to in companies of developed countries, the application in developing countries is at its infant stage, as shown by the present article where the authors surveyed SHE Practice in 242 companies of 8 West-African countries. The survey demonstrated that (i) the overall performances are poor, although significant improvement can be achieved with a minimum of goodwill and management support; (ii) despite financial difficulties faced by small and medium enterprises (SME), SHE management is a must and should start with a pollution prevention program that will vary with individual needs but some conscious planning effort is always necessary; (iii) it is necessary to prepare for appropriate actions for pollution abatement, adapted to the existing and future production facilities. Although the recorded results are rather poor, there are obviously many possibilities of improvement, with a little goodwill of the SME managers and supervisors. Reaching a standard level of the environmental management is a long but an important process.

77 FR 19132 - Federal Motor Vehicle Safety Standards; Bus Emergency Exits and Window Retention and Release

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-30

... DEPARTMENT OF TRANSPORTATION National Highway Traffic Safety Administration 49 CFR Part 571 [Docket No. NHTSA-2012-0037] RIN 2127-AK20 Federal Motor Vehicle Safety Standards; Bus Emergency Exits and Window Retention and Release AGENCY: National Highway Traffic Safety Administration (NHTSA), Department...

Improving Patient Safety in Public Hospitals: Developing Standard Measures to Track Medical Errors and Process Breakdowns.

PubMed

Ackerman, Sara L; Gourley, Gato; Le, Gem; Williams, Pamela; Yazdany, Jinoos; Sarkar, Urmimala

2018-03-14

The aim of the study was to develop standards for tracking patient safety gaps in ambulatory care in safety net health systems. Leaders from five California safety net health systems were invited to participate in a modified Delphi process sponsored by the Safety Promotion Action Research and Knowledge Network (SPARKNet) and the California Safety Net Institute in 2016. During each of the three Delphi rounds, the feasibility and validity of 13 proposed patient safety measures were discussed and prioritized. Surveys and transcripts from the meetings were analyzed to understand the decision-making process. The Delphi process included eight panelists. Consensus was reached to adopt 9 of 13 proposed measures. All 9 measures were unanimously considered valid, but concern was expressed about the feasibility of implementing several of the measures. Although safety net health systems face high barriers to standardized measurement, our study demonstrates that consensus can be reached on acceptable and feasible methods for tracking patient safety gaps in safety net health systems. If accompanied by the active participation key stakeholder groups, including patients, clinicians, staff, data system professionals, and health system leaders, the consensus measures reported here represent one step toward improving ambulatory patient safety in safety net health systems.

Radon in the Workplace: the Occupational Safety and Health Administration (OSHA) Ionizing Radiation Standard.

PubMed

Lewis, Robert K

2016-10-01

On 29 December 1970, the Occupational Safety and Health Act of 1970 established the Occupational Safety and Health Administration (OSHA). This article on OSHA, Title 29, Part 1910.1096 Ionizing Radiation standard was written to increase awareness of the employer, the workforce, state and federal governments, and those in the radon industry who perform radon testing and radon mitigation of the existence of these regulations, particularly the radon relevant aspect of the regulations. This review paper was also written to try to explain what can sometimes be complicated regulations. As the author works within the Radon Division of the Pennsylvania Department of Environmental Protection, Bureau of Radiation Protection, the exclusive focus of the article is on radon. The 1910.1096 standard obviously covers many other aspects of radiation and radiation safety in the work place.

Effect of the New York State cigarette fire safety standard on ignition propensity, smoke constituents, and the consumer market.

PubMed

Connolly, G N; Alpert, H R; Rees, V; Carpenter, C; Wayne, G F; Vallone, D; Koh, H

2005-10-01

This study examines empirical evidence from the New York experience testing tobacco industry arguments made in opposition to fire safety standards for cigarettes. Percentages of cigarettes exhibiting full length burns (FLBs), cigarette sales before and following the implementation of the New York standards, a sample of retail cigarette prices, brand availability, and selected smoke constituent yields were compared between cigarettes sold in New York and two other states. Cigarette paper analysis was conducted on cigarettes sold in New York. New York cigarette brands averaged 10.0% FLBs as compared to 99.8% for California and Massachusetts brands. Reduced ignition propensity (RIP) appears to have been achieved by cigarette paper banding. Cigarette sales, prices, and brand availability do not appear to have been affected by the New York standards. Yields of the majority of smoke constituents tested did not differ substantially between RIP cigarettes sold in New York as compared to the same brands sold in Massachusetts. Average yields of tar, carbon monoxide, and two compounds were slightly higher, the yields of seven compounds were higher for one brand only, and nicotine was lower, among New York brands tested. RIP cigarette brands have been designed to meet the New York fire safety standards. Their introduction has not affected cigarette sales or prices in New York. There is no evidence that the small increases in smoke constituent yields affect the already highly toxic nature of cigarette smoke. Data on smoking caused fires, deaths, and injuries dating from after the change in law are not yet available. Such data will be able to address the question of whether the demonstrated reduced ignition standards are associated with reduced fires and injuries. Based on the New York experience, prior industry objections to producing RIP cigarettes are unfounded. Other states and nations should adopt similar standards.

Small town health care safety nets: report on a pilot study.

PubMed

Taylor, Pat; Blewett, Lynn; Brasure, Michelle; Call, Kathleen Thiede; Larson, Eric; Gale, John; Hagopian, Amy; Hart, L Gary; Hartley, David; House, Peter; James, Mary Katherine; Ricketts, Thomas

2003-01-01

Very little is known about the health care safety net in small towns, especially in towns where there is no publicly subsidized safety-net health care. This pilot study of the primary care safety net in 7 such communities was conducted to start building knowledge about the rural safety net. Interviews were conducted and secondary data collected to assess the community need for safety-net care, the health care safety-net role of public officials, and the availability of safety-net care at private primary care practices and its financial impact on these practices. An estimated 20% to 40% of the people in these communities were inadequately insured and needed access to affordable health care, and private primary care practices in most towns played an important role in making primary care available to them. Most of the physician practices were owned or subsidized by a hospital or regional network, though not explicitly to provide charity care. It is likely this ownership or support enabled the practices to sustain a higher level of charity care than would have been possible otherwise. In the majority of communities studied, the leading public officials played no role in ensuring access to safety-net care. State and national government policy makers should consider subsidy programs for private primary care practices that attempt to meet the needs of the inadequately insured in the many rural communities where no publicly subsidized primary safety-net care is available. Subsidies should be directed to physicians in primary care shortage areas who provide safety-net care; this will improve safety-net access and, at the same time, improve physician retention by bolstering physician incomes. Options include enhanced Medicare physician bonuses and grants or tax credits to support income-related sliding fee scales.

Is it time to reassess current safety standards for glyphosate-based herbicides?

PubMed

Vandenberg, Laura N; Blumberg, Bruce; Antoniou, Michael N; Benbrook, Charles M; Carroll, Lynn; Colborn, Theo; Everett, Lorne G; Hansen, Michael; Landrigan, Philip J; Lanphear, Bruce P; Mesnage, Robin; Vom Saal, Frederick S; Welshons, Wade V; Myers, John Peterson

2017-06-01

Use of glyphosate-based herbicides (GBHs) increased ∼100-fold from 1974 to 2014. Additional increases are expected due to widespread emergence of glyphosate-resistant weeds, increased application of GBHs, and preharvest uses of GBHs as desiccants. Current safety assessments rely heavily on studies conducted over 30 years ago. We have considered information on GBH use, exposures, mechanisms of action, toxicity and epidemiology. Human exposures to glyphosate are rising, and a number of in vitro and in vivo studies challenge the basis for the current safety assessment of glyphosate and GBHs. We conclude that current safety standards for GBHs are outdated and may fail to protect public health or the environment. To improve safety standards, the following are urgently needed: (1) human biomonitoring for glyphosate and its metabolites; (2) prioritisation of glyphosate and GBHs for hazard assessments, including toxicological studies that use state-of-the-art approaches; (3) epidemiological studies, especially of occupationally exposed agricultural workers, pregnant women and their children and (4) evaluations of GBHs in commercially used formulations, recognising that herbicide mixtures likely have effects that are not predicted by studying glyphosate alone. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Codex Alimentarius: food quality and safety standards for international trade.

PubMed

Randell, A W; Whitehead, A J

1997-08-01

Since 1962, the Codex Alimentarius Commission (CAC) of the Food and Agriculture Organisation/World Health Organisation has been responsible for developing standards, guidelines and other recommendations on the quality and safety of food to protect the health of consumers and to ensure fair practices in food trade. The mission of the CAC remains relevant, but a number of factors have shown the need for new techniques to form the basis of food standards, the most important of which is risk analysis. The authors give a brief description of the role and work of the CAC and the efforts deployed by the Commission to respond to the challenges posed by new approaches to government regulation, harmonisation of national requirements based on international standards and the role of civil society.

76 FR 15903 - Federal Motor Vehicle Safety Standards; Roof Crush Resistance

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-22

... documents in that rulemaking, NHTSA discussed the history of issues related to the certification of vehicles... thought a proposed option for certain multi-stage vehicles to meet the requirements of FMVSS No. 220... rule that upgraded the agency's safety standard on roof crush resistance. The petition was submitted by...

78 FR 16051 - Vehicle/Track Interaction Safety Standards; High-Speed and High Cant Deficiency Operations

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-13

...FRA is amending the Track Safety Standards and Passenger Equipment Safety Standards to promote the safe interaction of rail vehicles with the track over which they operate under a variety of conditions at speeds up to 220 m.p.h. The final rule revises standards for track geometry and safety limits for vehicle response to track conditions, enhances vehicle/track qualification procedures, and adds flexibility for permitting high cant deficiency train operations through curves at conventional speeds. The rule accounts for a range of vehicle types that are currently in operation, as well as vehicle types that may likely be used in future high-speed or high cant deficiency rail operations, or both. The rule is based on the results of simulation studies designed to identify track geometry irregularities associated with unsafe wheel/rail forces and accelerations, thorough reviews of vehicle qualification and revenue service test data, and consideration of international practices.

76 FR 63509 - Small Business Size Standards: Administrative and Support, Waste Management and Remediation Services

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-12

... Small Business Size Standards: Administrative and Support, Waste Management and Remediation Services... Standards: Administrative and Support, Waste Management and Remediation Services AGENCY: U.S. Small Business...) Sector 56, Administrative and Support, Waste Management and Remediation Services. As part of its ongoing...

MINIMUM STANDARDS FOR APPROVAL OF GUIDANCE PROGRAMS IN SMALL HIGH SCHOOLS.

ERIC Educational Resources Information Center

New Mexico State Dept. of Education, Santa Fe.

A SMALL HIGH SCHOOL IS DEFINED AS ONE WITH AN ENROLLMENT OF 150 STUDENTS OR LESS IN GRADES 7-12 OR IN GRADES 9-12. THE MINIMUM GUIDANCE PROGRAM STANDARDS FOR SMALL HIGH SCHOOLS, AS PRESCRIBED BY THE NEW MEXICO DEPARTMENT OF EDUCATION, INCLUDE THE FOLLOWING REQUIREMENTS--(1) ONE PERSON WITH A MINIMUM OF SIX SEMESTER HOURS IN GUIDANCE MUST BE…

75 FR 6070 - Notice of Public Meeting on the International Atomic Energy Agency Basic Safety Standards Version...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-05

... Energy Agency Basic Safety Standards Version 3.0, Draft Safety Requirements DS379 AGENCY: Nuclear Regulatory Commission. ACTION: Notice of Public Meeting on the International Atomic Energy Agency Basic... development of U.S. Government comments on this International Atomic Energy Agency (IAEA) draft General Safety...

Independent Suture Tape Reinforcement of Small and Standard Diameter Grafts for Anterior Cruciate Ligament Reconstruction: A Biomechanical Full Construct Model.

PubMed

Bachmaier, Samuel; Smith, Patrick A; Bley, Jordan; Wijdicks, Coen A

2018-02-01

To compare the dynamic elongation, stiffness behavior, and ultimate failure load of standard with small diameter soft tissue grafts for anterior cruciate ligament (ACL) reconstruction with and without high-strength suture tape reinforcement. Both a tripled "small" diameter and a "standard" quadrupled tendon graft with and without suture tape reinforcement were tested using suspensory fixation (n = 8 each group). The suture tape was passed through the suspensory fixation button on the femur and tibia to ensure independent (safety belt) fixation from the graft in vitro. The testing of the constructs included position-controlled cyclic loading, force-controlled cyclic loading at 250 N and 400 N as well as pull to failure (50 mm/min). Reinforcement of a small diameter graft significantly reduced dynamic elongation of 38% (1.46 ± 0.28 mm vs 2.34 ± 0.44 mm, P < .001) and 50% (2.55 ± 0.44 mm vs 5.06 ± 0.67 mm, P < .001) after the 250 N and 400 N load protocol, respectively. Reinforcement of a standard diameter tendon graft decreased dynamic elongation of 15% (1.59 ± 0.34 mm vs 1.86 ± 0.17 mm, P = .066) and 26% (2.62 ± 0.44 mm vs 3.55 ± 0.44 mm, P < .001). No significant difference was found between both reinforced models. The ultimate failure loads of small and standard diameter reinforced grafts were 1592 ± 105 N and 1585 ± 265 N, resulting in a 64% (P < .001) and 40% (P < .001) increase compared with their respective controls. Independent suture tape reinforcement of soft tissue grafts for ACL reconstruction leads to significantly reduced elongation and higher ultimate failure load according to in vivo native ACL function data without stress-shielding the soft tissue graft. If in vitro results are translational to human knees in vivo, the suture tape reinforcement technique for ACL reconstruction may decrease the risk of graft tears, particularly in the case of small diameter soft tissue grafts. Copyright © 2017 Arthroscopy Association of

Food safety regulations in Australia and New Zealand Food Standards.

PubMed

Ghosh, Dilip

2014-08-01

Citizens of Australia and New Zealand recognise that food security is a major global issue. Food security also affects Australia and New Zealand's status as premier food exporting nations and the health and wellbeing of the Australasian population. Australia is uniquely positioned to help build a resilient food value chain and support programs aimed at addressing existing and emerging food security challenges. The Australian food governance system is fragmented and less transparent, being largely in the hands of government and semi-governmental regulatory authorities. The high level of consumer trust in Australian food governance suggests that this may be habitual and taken for granted, arising from a lack of negative experiences of food safety. In New Zealand the Ministry of Primary Industries regulates food safety issues. To improve trade and food safety, New Zealand and Australia work together through Food Standards Australia New Zealand (FSANZ) and other co-operative agreements. Although the potential risks to the food supply are dynamic and constantly changing, the demand, requirement and supply for providing safe food remains firm. The Australasian food industry will need to continually develop its system that supports the food safety program with the help of scientific investigations that underpin the assurance of what is and is not safe. The incorporation of a comprehensive and validated food safety program is one of the total quality management systems that will ensure that all areas of potential problems are being addressed by industry. © 2014 Society of Chemical Industry.

Software Safety Risk in Legacy Safety-Critical Computer Systems

NASA Technical Reports Server (NTRS)

Hill, Janice L.; Baggs, Rhoda

2007-01-01

Safety Standards contain technical and process-oriented safety requirements. Technical requirements are those such as "must work" and "must not work" functions in the system. Process-Oriented requirements are software engineering and safety management process requirements. Address the system perspective and some cover just software in the system > NASA-STD-8719.13B Software Safety Standard is the current standard of interest. NASA programs/projects will have their own set of safety requirements derived from the standard. Safety Cases: a) Documented demonstration that a system complies with the specified safety requirements. b) Evidence is gathered on the integrity of the system and put forward as an argued case. [Gardener (ed.)] c) Problems occur when trying to meet safety standards, and thus make retrospective safety cases, in legacy safety-critical computer systems.

50 CFR 600.355 - National Standard 10-Safety of Life at Sea.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 50 Wildlife and Fisheries 12 2013-10-01 2013-10-01 false National Standard 10-Safety of Life at Sea. 600.355 Section 600.355 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE MAGNUSON-STEVENS ACT PROVISIONS National...

29 CFR 5.8 - Liquidated damages under the Contract Work Hours and Safety Standards Act.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 1 2011-07-01 2011-07-01 false Liquidated damages under the Contract Work Hours and Safety... APPLICABLE TO NONCONSTRUCTION CONTRACTS SUBJECT TO THE CONTRACT WORK HOURS AND SAFETY STANDARDS ACT) Davis-Bacon and Related Acts Provisions and Procedures § 5.8 Liquidated damages under the Contract Work Hours...

29 CFR 5.8 - Liquidated damages under the Contract Work Hours and Safety Standards Act.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 1 2010-07-01 2010-07-01 true Liquidated damages under the Contract Work Hours and Safety... APPLICABLE TO NONCONSTRUCTION CONTRACTS SUBJECT TO THE CONTRACT WORK HOURS AND SAFETY STANDARDS ACT) Davis-Bacon and Related Acts Provisions and Procedures § 5.8 Liquidated damages under the Contract Work Hours...

Safety project development capacity for small communities in coordination with Local Technical Assistance Program (LTAP) center.

DOT National Transportation Integrated Search

2013-10-01

The goal of Floridas 2012 Strategic Highway Safety Plan is to reduce serious and fatal crashes on all of Florida's road system, including small rural communities. However, there are a few challenges in the way: most small communities lack technica...

Safety Verification of the Small Aircraft Transportation System Concept of Operations

NASA Technical Reports Server (NTRS)

Carreno, Victor; Munoz, Cesar

2005-01-01

A critical factor in the adoption of any new aeronautical technology or concept of operation is safety. Traditionally, safety is accomplished through a rigorous process that involves human factors, low and high fidelity simulations, and flight experiments. As this process is usually performed on final products or functional prototypes, concept modifications resulting from this process are very expensive to implement. This paper describe an approach to system safety that can take place at early stages of a concept design. It is based on a set of mathematical techniques and tools known as formal methods. In contrast to testing and simulation, formal methods provide the capability of exhaustive state exploration analysis. We present the safety analysis and verification performed for the Small Aircraft Transportation System (SATS) Concept of Operations (ConOps). The concept of operations is modeled using discrete and hybrid mathematical models. These models are then analyzed using formal methods. The objective of the analysis is to show, in a mathematical framework, that the concept of operation complies with a set of safety requirements. It is also shown that the ConOps has some desirable characteristic such as liveness and absence of dead-lock. The analysis and verification is performed in the Prototype Verification System (PVS), which is a computer based specification language and a theorem proving assistant.

Department of Homeland Security (DHS) Proficiency Testing on Small-Scale Safety and Thermal Testing of Improvised Explosives

NASA Astrophysics Data System (ADS)

Reynolds, John; Sandstrom, Mary; Brown, Geoffrey; Warner, Kirstin; Phillips, Jason; Shelley, Timothy; Reyes, Jose; Hsu, Peter

2013-06-01

One of the first steps in establishing safe handling procedures for explosives is small-scale safety and thermal (SSST) testing. To better understand the response of improvised materials or HMEs to SSST testing, 18 HME materials were compared to 3 standard military explosives in a proficiency-type round robin study among five laboratories--2 DoD and 3 DOE--sponsored by DHS. The testing matrix has been designed to address problems encountered with improvised materials--powder mixtures, liquid suspensions, partially wetted solids, immiscible liquids, and reactive materials. Over 30 issues have been identified that indicate standard test methods may require modification when applied to HMEs to derive accurate sensitivity assessments needed for development safe handling and storage practices. This presentation will discuss experimental difficulties encountered when testing these problematic samples, show inter-laboratory testing results, show some statistical interpretation of the results, and highlight some of the testing issues. Some of the work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344. LLNL-ABS-617519 (721812).

18 CFR 292.308 - Standards for operating reliability.

Code of Federal Regulations, 2010 CFR

2010-04-01

... reliability. 292.308 Section 292.308 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY... SMALL POWER PRODUCTION AND COGENERATION Arrangements Between Electric Utilities and Qualifying... may establish reasonable standards to ensure system safety and reliability of interconnected...

Understanding the Perception of Very Small Software Companies towards the Adoption of Process Standards

NASA Astrophysics Data System (ADS)

Basri, Shuib; O'Connor, Rory V.

This paper is concerned with understanding the issues that affect the adoption of software process standards by Very Small Entities (VSEs), their needs from process standards and their willingness to engage with the new ISO/IEC 29110 standard in particular. In order to achieve this goal, a series of industry data collection studies were undertaken with a collection of VSEs. A twin track approach of a qualitative data collection (interviews and focus groups) and quantitative data collection (questionnaire) were undertaken. Data analysis was being completed separately and the final results were merged, using the coding mechanisms of grounded theory. This paper serves as a roadmap for both researchers wishing to understand the issues of process standards adoption by very small companies and also for the software process standards community.

Small, Optically-Driven Power Source

NASA Technical Reports Server (NTRS)

Cockrum, Richard H.; Wang, Ke-Li J.

1988-01-01

Power transmitted along fiber-optic cables. Transmitted as infrared light along fiber-optic cable, converted to electricity to supply small electronic circuit. Power source and circuit remains electrically isolated from each other for safety or reduces electromagnetic interference. Array of diodes made by standard integrated-circuit techniques and packaged for mounting at end of fiber-optic cable.

48 CFR 52.222-4 - Contract Work Hours and Safety Standards Act-Overtime Compensation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... work over 40 hours in any workweek unless they are paid at least 1 and 1/2 times the basic rate of pay... excess of the standard workweek of 40 hours without paying overtime wages required by the Contract Work... CLAUSES Text of Provisions and Clauses 52.222-4 Contract Work Hours and Safety Standards Act—Overtime...

77 FR 43811 - Submission for OMB Review; Comment Request-Safety Standards for Full-Size Baby Cribs and Non-Full...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-26

... CONSUMER PRODUCT SAFETY COMMISSION Submission for OMB Review; Comment Request--Safety Standards for Full-Size Baby Cribs and Non-Full-Size Baby Cribs; Compliance Form AGENCY: Consumer Product Safety Commission. ACTION: Notice. SUMMARY: The Consumer Product Safety Commission (CPSC or Commission) announces...

77 FR 15845 - State Small Business Credit Initiative (SSBCI) National Standards For Compliance

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-16

... DEPARTMENT OF THE TREASURY State Small Business Credit Initiative (SSBCI) National Standards For Compliance AGENCY: Department of the Treasury. ACTION: Notice of Document Availability. SUMMARY: This Notice announces the availability of ``SSBCI National Standards: Compliance and Oversight for Participating States...

Modernisation and consolidation of the European radiation protection legislation: the new Euratom Basic Safety Standards Directive.

PubMed

Mundigl, Stefan

2015-04-01

With the publication of new basic safety standards for the protection against the dangers arising from exposure to ionising radiation, foreseen in Article 2 and Article 30 of the Euratom Treaty, the European Commission modernises and consolidates the European radiation protection legislation. A revision of the Basic Safety Standards was needed in order (1) to take account of the scientific and technological progress since 1996 and (2) to consolidate the existing set of Euratom radiation protection legislation, merging five Directives and upgrading a recommendation to become legally binding. The new Directive offers in a single coherent document basics safety standards for radiation protection, which take account of the most recent advances in science and technology, cover all relevant radiation sources, including natural radiation sources, integrate protection of workers, members of the public, patients and the environment, cover all exposure situations, planned, existing, emergency, and harmonise numerical values with international standards. After the publication of the Directive in the beginning of 2014, Member States have 4 y to transpose the Directive into national legislation and to implement the requirements therein. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

12 CFR Appendix C to Part 1720 - Policy Guidance; Safety and Soundness Standards for Information

Code of Federal Regulations, 2014 CFR

2014-01-01

... Standards for Information C Appendix C to Part 1720 Banks and Banking OFFICE OF FEDERAL HOUSING ENTERPRISE..., App. C Appendix C to Part 1720—Policy Guidance; Safety and Soundness Standards for Information A... for Information 1. Information Security Program. 2. Objectives. C—Development and Implementation of...

Safety profile of platinum-based chemotherapy in the treatment of advanced non-small cell lung cancer in elderly patients.

PubMed

Rossi, Antonio; Maione, Paolo; Gridelli, Cesare

2005-11-01

Non-small cell lung cancer (NSCLC) may be considered typical of advanced age. More than 50% of NSCLC patients are diagnosed at > 65 years of age and approximately one-third of all patients are > 70 years of age. Elderly patients tolerate chemotherapy poorly compared with their younger counterpart because of the progressive reduction of organ function and comorbidities related to age. For this reason, these patients are often not considered eligible for aggressive platinum-based chemotherapy, the standard medical treatment for advanced NSCLC. In clinical practice, single-agent chemotherapy should remain the standard treatment. Feasibility of platinum-based chemotherapy remains an open issue and has to be proven prospectively. Moreover, a multidimensional geriatric assessment for individualised treatment choice in NSCLC elderly patients is mandatory. This review focuses on the currently-available evidences for the treatment of elderly patients affected by advanced NSCLC with regards to the role and safety of platinum-based chemotherapy.

Effects of the Occupational Safety and Health Administration's control of hazardous energy (lockout/tagout) standard on rates of machinery-related fatal occupational injury.

PubMed

Bulzacchelli, Maria T; Vernick, Jon S; Webster, Daniel W; Lees, Peter S J

2007-10-01

To evaluate the impact of the United States' federal Occupational Safety and Health Administration's control of hazardous energy (lockout/tagout) standard on rates of machinery-related fatal occupational injury. The standard, which took effect in 1990, requires employers in certain industries to establish an energy control program and sets minimum criteria for energy control procedures, training, inspections, and hardware. An interrupted time-series design was used to determine the standard's effect on fatality rates. Machinery-related fatalities, obtained from the National Traumatic Occupational Fatalities surveillance system for 1980 through 2001, were used as a proxy for lockout/tagout-related fatalities. Linear regression was used to control for changes in demographic and economic factors. The average annual crude rate of machinery-related fatalities in manufacturing changed little from 1980 to 1989, but declined by 4.59% per year from 1990 to 2001. However, when controlling for demographic and economic factors, the regression model estimate of the standard's effect is a small, non-significant increase of 0.05 deaths per 100 000 production worker full-time equivalents (95% CI -0.14 to 0.25). When fatality rates in comparison groups that should not have been affected by the standard are incorporated into the analysis, there is still no significant change in the rate of machinery-related fatalities in manufacturing. There is no evidence that the lockout/tagout standard decreased fatality rates relative to other trends in occupational safety over the study period. A possible explanation is voluntary use of lockout/tagout by some employers before introduction of the standard and low compliance by other employers after.

Effects of the Occupational Safety and Health Administration's control of hazardous energy (lockout/tagout) standard on rates of machinery‐related fatal occupational injury

PubMed Central

Bulzacchelli, Maria T; Vernick, Jon S; Webster, Daniel W; Lees, Peter S J

2007-01-01

Objective To evaluate the impact of the United States' federal Occupational Safety and Health Administration's control of hazardous energy (lockout/tagout) standard on rates of machinery‐related fatal occupational injury. The standard, which took effect in 1990, requires employers in certain industries to establish an energy control program and sets minimum criteria for energy control procedures, training, inspections, and hardware. Design An interrupted time‐series design was used to determine the standard's effect on fatality rates. Machinery‐related fatalities, obtained from the National Traumatic Occupational Fatalities surveillance system for 1980 through 2001, were used as a proxy for lockout/tagout‐related fatalities. Linear regression was used to control for changes in demographic and economic factors. Results The average annual crude rate of machinery‐related fatalities in manufacturing changed little from 1980 to 1989, but declined by 4.59% per year from 1990 to 2001. However, when controlling for demographic and economic factors, the regression model estimate of the standard's effect is a small, non‐significant increase of 0.05 deaths per 100 000 production worker full‐time equivalents (95% CI −0.14 to 0.25). When fatality rates in comparison groups that should not have been affected by the standard are incorporated into the analysis, there is still no significant change in the rate of machinery‐related fatalities in manufacturing. Conclusions There is no evidence that the lockout/tagout standard decreased fatality rates relative to other trends in occupational safety over the study period. A possible explanation is voluntary use of lockout/tagout by some employers before introduction of the standard and low compliance by other employers after. PMID:17916891

Complying with the Occupational Safety and Health Administration's Bloodborne Pathogens Standard: implementing needleless systems and intravenous safety devices.

PubMed

Marini, Michelle A; Giangregorio, Maeve; Kraskinski, Joanna C

2004-03-01

Preventing the transmission of bloodborne pathogens to healthcare workers has been a mission and a challenge of the healthcare industry for over 20 years. The development of the Occupational Safety and Health Administration Bloodborne Pathogens Standard in 1991 and the passing of the Needlestick Safety Act in 2000 mandated hospitals to develop an Exposure Control Plan to protect workers from these pathogens. Children's Hospital Boston began implementation of a needleless system in 1993. Employees readily accepted these systems into practice, because they were convenient and easy to use. A marked decrease in exposures to bloodborne pathogens naturally followed, which is consistent with the national data. The transition to intravenous (i.v.) safety devices at Children's Hospital began in 2000 and proved to be more of a challenge. First, the clinicians must choose a safety product, which requires developing and implementing a trial plan with potential catheters. This selection process is especially difficult in pediatrics where successful placement of the smallest-gauge catheter, no. 24, is imperative. After choosing an i.v. safety product, successful transition is dependent upon the thoroughness of i.v. safety device training and a commitment by the clinicians to the use of these products. Although the number of needlestick injuries and subsequent transmission of bloodborne pathogens have been further reduced with the use of i.v. safety devices, needlestick injuries still occur. This results from a lack of familiarity with the engineering of the device and therefore poor technique or a failure to activate the safety mechanism. Staff resistance due to loss of expertise with the new device and patient care concerns are additional barriers to the use of these new products. Addressing these obstacles and providing adequate training for all clinicians were required for successful implementation of these i.v. safety devices.

Small hydropower plants standardization, between myth and reality

NASA Astrophysics Data System (ADS)

Paraschivescu, A. V.; Ahmad-Rashid, K.; Popa, F.; Popa, B.

2017-01-01

Many providers for small hydropower plants equipment have tried to standardize the components and even the entire equipment. So called “compact turbines” were launched on the market, ensuring the pre-designed solution of the modular components, but usually with lower efficiency then turbines specially designed for a certain site. For civil works it is possible to standardize some components, such as the powerhouse, the surge tank or the headrace, but not the intake and the weir. Part of the hydropower plants can be standardized, but not the entire project, because there are a lot of variables that influence the design. Among these, the dimension, materials and design of the canal and the penstock are given by the hydrology, topography and the geology of the project’s area. This paper presents an attempt at standardization by using different heads and different installed flows. The case study is made on the Lukosi River from Tanzania, because there is a good hydrological database on power and energy calculation. For the powerhouse, pressure tower and intake dimensioning, the assumptions and materials considered cover all challenges that could appear in the geological and topographical structure of the project’s area (worst case, most expensive). The study has highlighted African climatologic and hydrological conditions and the adapting of current technology to these conditions.

Improving the safety and quality of nursing care through standardized operating procedures in Bosnia and Herzegovina.

PubMed

Ausserhofer, Dietmar; Rakic, Severin; Novo, Ahmed; Dropic, Emira; Fisekovic, Eldin; Sredic, Ana; Van Malderen, Greet

2016-06-01

We explored how selected 'positive deviant' healthcare facilities in Bosnia and Herzegovina approach the continuous development, adaptation, implementation, monitoring and evaluation of nursing-related standard operating procedures. Standardized nursing care is internationally recognized as a critical element of safe, high-quality health care; yet very little research has examined one of its key instruments: nursing-related standard operating procedures. Despite variability in Bosnia and Herzegovina's healthcare and nursing care quality, we assumed that some healthcare facilities would have developed effective strategies to elevate nursing quality and safety through the use of standard operating procedures. Guided by the 'positive deviance' approach, we used a multiple-case study design to examine a criterion sample of four facilities (two primary healthcare centres and two hospitals), collecting data via focus groups and individual interviews. In each studied facility, certification/accreditation processes were crucial to the initiation of continuous development, adaptation, implementation, monitoring and evaluation of nursing-related SOPs. In one hospital and one primary healthcare centre, nurses working in advanced roles (i.e. quality coordinators) were responsible for developing and implementing nursing-related standard operating procedures. Across the four studied institutions, we identified a consistent approach to standard operating procedures-related processes. The certification/accreditation process is enabling necessary changes in institutions' organizational cultures, empowering nurses to take on advanced roles in improving the safety and quality of nursing care. Standardizing nursing procedures is key to improve the safety and quality of nursing care. Nursing and Health Policy are needed in Bosnia and Herzegovina to establish a functioning institutional framework, including regulatory bodies, educational systems for developing nurses' capacities or the

78 FR 15920 - Federal Motor Vehicle Safety Standards; Tire Selection and Rims

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-13

... [Docket No. NHTSA-2013-0030] RIN 2127-AL24 Federal Motor Vehicle Safety Standards; Tire Selection and Rims...: Notice of proposed rulemaking (NPRM). SUMMARY: This document proposes to amend Federal Motor Vehicle... installed on new trailers with a gross vehicle weight rating (GVWR) of 4,536 kg (10,000 lbs.) or less. It...

Development of national standards related to the integrated safety and security of high-rise buildings

NASA Astrophysics Data System (ADS)

Voskresenskaya, Elena; Vorona-Slivinskaya, Lubov

2018-03-01

The article considers the issues of developing national standards for high-rise construction. The system of standards should provide industrial, operational, economic and terrorist safety of high-rise buildings and facilities. Modern standards of high-rise construction should set the rules for designing engineering systems of high-rise buildings, which will ensure the integrated security of buildings, increase their energy efficiency and reduce the consumption of resources in construction and operation.

75 FR 35286 - Agency Information Collection Activities; Proposed Collection; Comment Request; Safety Standard...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-21

... instructional literature requirements in the Safety Standard for Infant walkers. DATES: Submit written or... for marking and instructional literature. We estimate the burden of this collection of information as... literature that are disclosure requirements, thus falling within the definition of ``collections of...

The role of evidence, standards and education in rock fishing safety in New South Wales, Australia.

PubMed

Mitchell, Rebecca J; Ware, Lauren; Bambach, Mike R

2014-12-01

To examine rock fishing-related fatalities and hospitalisations, identify initiatives aimed at improving safety and survey key rock fishing stakeholders about the strengths and limitations of each initiative. This research obtained information from mortality and hospitalisation statistics, the published literature and key stakeholders for opinions on the strengths, limitations and improvements for rock fishing safety initiatives. Injury patterns involving rock fishers have largely remained unchanged over time. The literature revealed that many rock fishing safety initiatives focused on awareness raising and engineering initiatives, but ignored the development of guidelines and the use of enforcement strategies. There had been limited evaluations conducted of any of the initiatives reviewed. It is likely that a combination of evidence-based, standard-focused and education initiatives would be useful in improving rock fishing safety in NSW, provided that the impact of these initiatives were routinely evaluated. Information from this research will be used to inform preventive strategies aimed at improving rock fishing safety through better coordination of the role of evidence in informing standards and practices and the continued evaluation of these initiatives. © 2014 Public Health Association of Australia.

A 10-step safety management framework for construction small and medium-sized enterprises.

PubMed

Gunduz, Murat; Laitinen, Heikki

2017-09-01

It is of great importance to develop an occupational health and safety management system (OHS MS) to form a systemized approach to improve health and safety. It is a known fact that thousands of accidents and injuries occur in the construction industry. Most of these accidents occur in small and medium-sized enterprises (SMEs). This article provides a 10-step user-friendly OHS MS for the construction industry. A quantitative OHS MS indexing method is also introduced in the article. The practical application of the system to real SMEs and its promising results are also presented.

Slow progress on meeting hospital safety standards: learning from the Leapfrog Group's efforts.

PubMed

Moran, John; Scanlon, Dennis

2013-01-01

In response to the Institute of Medicine's To Err Is Human report on the prevalence of medical errors, the Leapfrog Group, an organization that promotes hospital safety and quality, established a voluntary hospital survey assessing compliance with several safety standards. Using data from the period 2002-07, we conducted the first longitudinal assessment of how hospitals in specific cities and states initially selected by Leapfrog progressed on public reporting and adoption of standards requiring the use of computerized drug order entry and hospital intensivists. Overall, little progress was observed. Reporting rates were unchanged over the study period. Adoption of computerized drug order entry increased from 2.94 percent to 8.13 percent, and intensivist staffing increased from 14.74 percent to 21.40 percent. These findings should not be viewed as an indictment of Leapfrog but may reflect various challenges. For example, hospitals faced no serious threats to their market share if purchasers shifted business away from those that either didn't report data or didn't meet the standards. In the absence of mandatory reporting, policy makers might need to act to address these challenges to ensure improvements in quality.

Human resource factors associated with workplace safety and health education of small manufacturing businesses in Korea.

PubMed

Park, Kyoung-Ok

2018-01-25

Human resources (HR) are essential indicators of safety and health (SH) status, and HR can be key sources of workplace safety management such as safety and health education at work (SHEW). This study analyzed significant HR factors associated with SHEW of small manufacturing businesses in Korea. The secondary data of the 2012 Korea Occupational Safety and Health Trend Survey were used to achieve this research purpose. A total of 2,089 supervisors or managers employed in the small manufacturing businesses completed the interview survey. Survey businesses were selected by multiple stratified sampling method based on industry code, business size, and region in Korea. The survey included workplace characteristics of HR and SHEW. SHEW was significantly related to business size, occupational injury incidence in the previous year, foreign and elderly worker employment, presence of site supervisors, and presence of SH committees (p <.05). SHEW for office workers, non-office workers, and newcomers was associated with business size, presence of site supervisors, and presence of SH committees in logistic regression analysis (p <.001). Businesses with 30-49 workers conducted SHEW 3.64 times more than did businesses with 5 to fewer than 10 workers. The companies that had occupational injuries in the previous year conducted SHEW 1.68 times more than the others. The businesses that had site supervisors and committees conducted SHEW 2.30 and 2.18 times more, respectively, than others. Site supervisors and SH committees were significant HR factors that improved SHEW in small manufacturing businesses.

Traceability of Software Safety Requirements in Legacy Safety Critical Systems

NASA Technical Reports Server (NTRS)

Hill, Janice L.

2007-01-01

How can traceability of software safety requirements be created for legacy safety critical systems? Requirements in safety standards are imposed most times during contract negotiations. On the other hand, there are instances where safety standards are levied on legacy safety critical systems, some of which may be considered for reuse for new applications. Safety standards often specify that software development documentation include process-oriented and technical safety requirements, and also require that system and software safety analyses are performed supporting technical safety requirements implementation. So what can be done if the requisite documents for establishing and maintaining safety requirements traceability are not available?

Introducing standardized “readbacks” to improve patient safety in surgery: a prospective survey in 92 providers at a public safety-net hospital

PubMed Central

2012-01-01

Background Communication breakdowns represent the main root cause of preventable complications which lead to harm to surgical patients. Standardized readbacks have been successfully implemented as a main pillar of professional aviation safety for decades, to ensure a safe closed-loop communication between air traffic control and individual pilots. The present study was designed to determine the perception of staff in perioperative services regarding the role of standardized readbacks for improving patient safety in surgery at a single public safety-net hospital and level 1 trauma center. Methods A 12-item questionnaire was sent to 180 providers in perioperative services at Denver Health Medical Center. The survey was designed to determine the individual participants’ perception of (1) appropriateness of current readback processes; (2) willingness to attend a future training module on this topic; (3) specific scenarios in which readbacks may be effective; and (4) perceived major barriers to the implementation of standardized readbacks. Survey results were compared between departments (surgery versus anesthesia) and between specific staff roles (attending or midlevel provider, resident physician, nursing staff), using non-parametric tests. Results The response rate to the survey was 50.1 % (n = 92). Respondents overwhelmingly recognized the role of readbacks in reducing communication errors and improving patient safety. There was a strong agreement among respondents to support participation in a readbacks training program. There was no difference in the responses between the surgery and anesthesia departments. There was a statistically significant difference in the healthcare providers willingness to attend a short training module on readbacks (p < 0.001). Resident physicians were less likely to endorse the importance of readbacks in reducing communication errors (p = 0.01) and less willing to attend a short training module on readbacks (p < 0

Health and safety needs in early care and education programs: what do directors, child health records, and national standards tell us?

PubMed

Alkon, Abbey; To, Kim; Mackie, Joanna F; Wolff, Mimi; Bernzweig, Jane

2010-01-01

To identify the overlapping and unique health and safety needs and concerns identified by early care and education (ECE) directors, health records, and observed compliance with national health and safety (NHS) standards. Cross-sectional study. 127 ECE programs from 5 California counties participated in the study, including 118 directors and 2,498 children's health records. Qualitative data were collected using standardized ECE directors' interviews to identify their health and safety concerns; and objective, quantitative data were collected using child health record reviews to assess regular health care, immunizations, health insurance, special health care needs, and screening tests and an observation Checklist of 66 key NHS standards collected by research assistants. The overlapping health and safety needs and concerns identified by the directors and through observations were hygiene and handwashing, sanitation and disinfection, supervision, and the safety of indoor and outdoor equipment. Some of the health and safety needs identified by only one assessment method were health and safety staff training, medical plans for children with special health care needs and follow-up on positive screening tests. Comprehensive, multimethod assessments are useful to identify health and safety needs and develop public health nursing interventions for ECE programs.

77 FR 55737 - Small Business Size Standards: Finance and Insurance and Management of Companies and Enterprises

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-11

...The U.S. Small Business Administration (SBA) proposes to increase small business size standards for 37 industries in North American Industry Classification System (NAICS) Sector 52, Finance and Insurance, and for two industries in NAICS Sector 55, Management of Companies and Enterprises. In addition, SBA proposes to change the measure of size from average assets to average receipts for NAICS 522293, International Trade Financing. As part of its ongoing comprehensive size standards review, SBA evaluated all receipts based and assets based size standards in NAICS Sectors 52 and 55 to determine whether they should be retained or revised. This proposed rule is one of a series of proposed rules that will review size standards of industries grouped by NAICS Sector. SBA issued a White Paper entitled ``Size Standards Methodology'' and published a notice in the October 21, 2009 issue of the Federal Register to advise the public that the document is available on its Web site at www.sba.gov/size for public review and comments. The ``Size Standards Methodology'' White Paper explains how SBA establishes, reviews, and modifies its receipts based and employee based small business size standards. In this proposed rule, SBA has applied its methodology that pertains to establishing, reviewing, and modifying a receipts based size standard.

16 CFR 1115.5 - Reporting of failures to comply with a voluntary consumer product safety standard relied upon by...

Code of Federal Regulations, 2010 CFR

2010-01-01

... voluntary consumer product safety standard relied upon by the Commission under section 9 of the CPSA. 1115.5 Section 1115.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SUBSTANTIAL PRODUCT HAZARD REPORTS General Interpretation § 1115.5 Reporting of failures to comply...

THE SCHOOL HEALTH AND SAFETY PROGRAM.

ERIC Educational Resources Information Center

1963

INVOLVING INDIVIDUALS AS WELL AS ORGANIZATIONS, THE PROGRAM AIMED AT THE OPTIMUM HEALTH OF ALL CHILDREN, AND IMPROVEMENT OF HEALTH AND SAFETY STANDARDS WITHIN THE COMMUNITY. EACH OF THE CHILDREN WAS URGED TO HAVE A SUCCESSFUL VACCINATION FOR SMALL POX, THE DPT SERIES AND BOOSTER, THE POLIO SERIES, AND CORRECTIONS OF ALL DENTAL DEFECTS AND…

10 CFR 431.446 - Small electric motors energy conservation standards and their effective dates.

Code of Federal Regulations, 2014 CFR

2014-01-01

... full load efficiency Capacitor-start capacitor-run and capacitor-start induction-run Open motors... 10 Energy 3 2014-01-01 2014-01-01 false Small electric motors energy conservation standards and... EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Small Electric Motors Energy Conservation...

10 CFR 431.446 - Small electric motors energy conservation standards and their effective dates.

Code of Federal Regulations, 2012 CFR

2012-01-01

... full load efficiency Capacitor-start capacitor-run and capacitor-start induction-run Open motors... 10 Energy 3 2012-01-01 2012-01-01 false Small electric motors energy conservation standards and... EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Small Electric Motors Energy Conservation...

10 CFR 431.446 - Small electric motors energy conservation standards and their effective dates.

Code of Federal Regulations, 2013 CFR

2013-01-01

... full load efficiency Capacitor-start capacitor-run and capacitor-start induction-run Open motors... 10 Energy 3 2013-01-01 2013-01-01 false Small electric motors energy conservation standards and... EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Small Electric Motors Energy Conservation...

Westinghouse Small Modular Reactor passive safety system response to postulated events

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, M. C.; Wright, R. F.

2012-07-01

The Westinghouse Small Modular Reactor (SMR) is an 800 MWt (>225 MWe) integral pressurized water reactor. This paper is part of a series of four describing the design and safety features of the Westinghouse SMR. This paper focuses in particular upon the passive safety features and the safety system response of the Westinghouse SMR. The Westinghouse SMR design incorporates many features to minimize the effects of, and in some cases eliminates the possibility of postulated accidents. The small size of the reactor and the low power density limits the potential consequences of an accident relative to a large plant. Themore » integral design eliminates large loop piping, which significantly reduces the flow area of postulated loss of coolant accidents (LOCAs). The Westinghouse SMR containment is a high-pressure, compact design that normally operates at a partial vacuum. This facilitates heat removal from the containment during LOCA events. The containment is submerged in water which also aides the heat removal and provides an additional radionuclide filter. The Westinghouse SMR safety system design is passive, is based largely on the passive safety systems used in the AP1000{sup R} reactor, and provides mitigation of all design basis accidents without the need for AC electrical power for a period of seven days. Frequent faults, such as reactivity insertion events and loss of power events, are protected by first shutting down the nuclear reaction by inserting control rods, then providing cold, borated water through a passive, buoyancy-driven flow. Decay heat removal is provided using a layered approach that includes the passive removal of heat by the steam drum and independent passive heat removal system that transfers heat from the primary system to the environment. Less frequent faults such as loss of coolant accidents are mitigated by passive injection of a large quantity of water that is readily available inside containment. An automatic depressurization system is

The Radiological Physics Center's standard dataset for small field size output factors.

PubMed

Followill, David S; Kry, Stephen F; Qin, Lihong; Lowenstein, Jessica; Molineu, Andrea; Alvarez, Paola; Aguirre, Jose Francisco; Ibbott, Geoffrey S

2012-08-08

Delivery of accurate intensity-modulated radiation therapy (IMRT) or stereotactic radiotherapy depends on a multitude of steps in the treatment delivery process. These steps range from imaging of the patient to dose calculation to machine delivery of the treatment plan. Within the treatment planning system's (TPS) dose calculation algorithm, various unique small field dosimetry parameters are essential, such as multileaf collimator modeling and field size dependence of the output. One of the largest challenges in this process is determining accurate small field size output factors. The Radiological Physics Center (RPC), as part of its mission to ensure that institutions deliver comparable and consistent radiation doses to their patients, conducts on-site dosimetry review visits to institutions. As a part of the on-site audit, the RPC measures the small field size output factors as might be used in IMRT treatments, and compares the resulting field size dependent output factors to values calculated by the institution's treatment planning system (TPS). The RPC has gathered multiple small field size output factor datasets for X-ray energies ranging from 6 to 18 MV from Varian, Siemens and Elekta linear accelerators. These datasets were measured at 10 cm depth and ranged from 10 × 10 cm(2) to 2 × 2 cm(2). The field sizes were defined by the MLC and for the Varian machines the secondary jaws were maintained at a 10 × 10 cm(2). The RPC measurements were made with a micro-ion chamber whose volume was small enough to gather a full ionization reading even for the 2 × 2 cm(2) field size. The RPC-measured output factors are tabulated and are reproducible with standard deviations (SD) ranging from 0.1% to 1.5%, while the institutions' calculated values had a much larger SD range, ranging up to 7.9% [corrected].The absolute average percent differences were greater for the 2 × 2 cm(2) than for the other field sizes. The RPC's measured small field output factors provide

Concept Study on a Flexible Standard Bus for Small Scientific Satellites

NASA Astrophysics Data System (ADS)

Fukuda, Seisuke; Sawai, Shujiro; Sakai, Shin-Ichiro; Saito, Hirobumi; Tohma, Takayuki; Takahashi, Junko; Toriumi, Tsuyoshi; Kitade, Kenji

In this paper, a new standard bus system for a series of small scientific satellites in the Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency (ISAS/JAXA) is described. Since each mission proposed for the series has a wide variety of requirements, a lot of efforts are needed to enhance flexibility of the standard bus. Some concepts from different viewpoints are proposed. First, standardization layers concerning satellite configuration, instruments, interfaces, and design methods are defined respectively. Methods of product platform engineering, which classify specifications of the bus system into a core platform, alternative variants, and selectable variants, are also investigated in order to realize a semi-custom-made bus. Furthermore, a tradeoff between integration and modularization architecture is fully considered.

Safety words inventory and literacy screener: standardization and validation.

PubMed

Glascoe, Frances Page

2002-01-01

When evaluating a school-aged patient, particularly for such issues as attention deficit disorder, or learning disabilities, health-care providers are encouraged to appraise children's school performance. Although some clinicians seek teachers' comments, recent research suggests that teachers' appraisals have limited value. As a consequence, health-care providers need brief methods, functional for busy primary care clinics, for detecting school problems. Because well-visits also include other services such as anticipatory guidance and safety and injury counseling, it would be helpful for detection tools to facilitate delivery of more than one aspect of well-child care. This study was undertaken to develop a brief method for evaluating school performance for elementary-age children and test its accuracy in identifying children with reading and other academic problems. By using common safety signs as the test stimuli, such a tool should also serve as a springboard to injury prevention counseling. Data were drawn from the standardization and validation data of an individually administered wide-range diagnostic achievement test using a geographically diverse, nationally representative sample of 934 children between 5 and 13 years of age. Children were administered the Comprehensive Inventory of Basic Skills-Revised (CIBS-R), which includes among its 10 subtests a 57-item measure of safety word recognition. Data were collected from previously administered measures of academics and intelligence. Forty-one children were administered the measure twice to assess inter-rater reliability. Logistic regression analyses were deployed using children's performance on the nine other subtests of the CIBS-R as the grouping variable, and as predictors, recognition of 57 safety words/phrases. Of these, 22 safety signs (e.g., "Keep out," "No Trespassing," "Danger") were significant predictors of overall academic performance. An additional seven safety words were added due to their

Confidence in the safety of standard childhood vaccinations among New Zealand health professionals.

PubMed

Lee, Carol; Duck, Isabelle; Sibley, Chris G

2018-05-04

To investigate the level of confidence in the safety of standard childhood vaccinations among health professionals in New Zealand. Data from the 2013/14 New Zealand Attitudes and Values Study (NZAVS) was used to investigate the level of agreement that "it is safe to vaccinate children following the standard New Zealand immunisation schedule" among different classes of health professionals (N=1,032). Most health professionals showed higher levels of vaccine confidence, with 96.7% of those describing their occupation as GP or simply 'doctor' (GPs/doctor) and 90.7% of pharmacists expressing strong vaccine confidence. However, there were important disparities between some other classes of health professionals, with only 65.1% of midwives and 13.6% of practitioners of alternative medicine expressing high vaccine confidence. As health professionals are a highly trusted source of vaccine information, communicating the consensus of belief among GPs/doctors that vaccines are safe may help provide reassurance for parents who ask about vaccine safety. However, the lower level of vaccine confidence among midwives is a matter of concern that may have negative influence on parental perceptions of vaccinations.

Safety Performance of Small Lithium-Ion Cells in High Voltage Batteries

NASA Technical Reports Server (NTRS)

Cowles, Philip R.; Darcy, Eric C.; Davies, Frank J.; Jeevarajan, Judith A.; Spurrett, Robert P.

2003-01-01

Topics covered include: Small-cell EAPU work done by NASA-JSC & COM DEV; Looking at safety features (short circuit protection - PTCs); Early tests showed that long strings do not withstand short circuit; a) Some PTCs experience large negative voltages; b) Destructive results. Solution: group cells into shorter substrings, with bypass diodes Work included: a) Tests with single cells shorted; b) Tests with single cells with imposed-negative voltages; c) 6s, 7s and 8s string shorts; and d) Tests with protection scheme in place, on 12s and 41s x 5p.

Intranet-based safety documentation in management of major hazards and occupational health and safety.

PubMed

Leino, Antti

2002-01-01

In the European Union, Council Directive 96/82/EC requires operators producing, using, or handling significant amounts of dangerous substances to improve their safety management systems in order to better manage the major accident potentials deriving from human error. A new safety management system for the Viikinmäki wastewater treatment plant in Helsinki, Finland, was implemented in this study. The system was designed to comply with both the new safety liabilities and the requirements of OHSAS 18001 (British Standards Institute, 1999). During the implementation phase experiences were gathered from the development processes in this small organisation. The complete documentation was placed in the intranet of the plant. Hyperlinks between documents were created to ensure convenience of use. Documentation was made accessible for all workers from every workstation.

49 CFR 231.33 - Procedure for special approval of existing industry safety appliance standards.

Code of Federal Regulations, 2013 CFR

2013-10-01

... specific number, dimension, location, and manner of application of each safety appliance contained in the industry standard; (3) Appropriate data or analysis, or both, for FRA to consider in determining whether..., inspection, testing, and maintenance under this part; (ii) Any organizations or bodies that either issued the...

49 CFR 231.33 - Procedure for special approval of existing industry safety appliance standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... specific number, dimension, location, and manner of application of each safety appliance contained in the industry standard; (3) Appropriate data or analysis, or both, for FRA to consider in determining whether..., inspection, testing, and maintenance under this part; (ii) Any organizations or bodies that either issued the...

49 CFR 231.33 - Procedure for special approval of existing industry safety appliance standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... specific number, dimension, location, and manner of application of each safety appliance contained in the industry standard; (3) Appropriate data or analysis, or both, for FRA to consider in determining whether..., inspection, testing, and maintenance under this part; (ii) Any organizations or bodies that either issued the...

49 CFR 231.33 - Procedure for special approval of existing industry safety appliance standards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... specific number, dimension, location, and manner of application of each safety appliance contained in the industry standard; (3) Appropriate data or analysis, or both, for FRA to consider in determining whether..., inspection, testing, and maintenance under this part; (ii) Any organizations or bodies that either issued the...

38 CFR 17.155 - Minimum standards of safety and quality for automotive adaptive equipment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... justify development of formal standards, such equipment will be inspected and, if in order, approved for... safety and quality for automotive adaptive equipment. 17.155 Section 17.155 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS MEDICAL Automotive Equipment and Driver Training § 17.155...

Energetic Materials Center Report--Small-Scale Safety and Thermal Testing Evaluation of Butyl Nitrate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hsu, Peter C.; Reynolds, John G.

2013-04-26

Butyl Nitrate (BN) was examined by Small-Scale Safety and Thermal (SSST) Testing techniques to determine its sensitivity to impact, friction, spark and thermal exposure simulating handling and storage conditions. Under the conditions tested, the BN exhibits thermal sensitivity above 150 °C, and does not exhibit sensitive to impact, friction or spark.

Safety management as a foundation for evidence-based aeromedical standards and reporting of medical events.

PubMed

Evans, Anthony D; Watson, Dougal B; Evans, Sally A; Hastings, John; Singh, Jarnail; Thibeault, Claude

2009-06-01

The different interpretations by States (countries) of the aeromedical standards established by the International Civil Aviation Organization has resulted in a variety of approaches to the development of national aeromedical policy, and consequently a relative lack of harmonization. However, in many areas of aviation, safety management systems have been recently introduced and may represent a way forward. A safety management system can be defined as "A systematic approach to managing safety, including the necessary organizational structures, accountabilities, policies, and procedures" (1). There are four main areas where, by applying safety management principles, it may be possible to better use aeromedical data to enhance flight safety. These are: 1) adjustment of the periodicity and content of routine medical examinations to more accurately reflect aeromedical risk; 2) improvement in reporting and analysis of routine medical examination data; 3) improvement in reporting and analysis of in-flight medical events; and 4) support for improved reporting of relevant aeromedical events through the promotion of an appropriate culture by companies and regulatory authorities. This paper explores how the principles of safety management may be applied to aeromedical systems to improve their contribution to safety.

77 FR 59374 - Certain Small Diameter Carbon and Alloy Seamless Standard, Line and Pressure Pipe (Under 41/2

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-27

... DEPARTMENT OF COMMERCE International Trade Administration [A-588-851] Certain Small Diameter Carbon and Alloy Seamless Standard, Line and Pressure Pipe (Under 4\\1/2\\ Inches) From Japan: Rescission... antidumping order on certain small diameter carbon and alloy seamless standard, line and pressure pipe (under...

Overview of the U.S. DOE Hydrogen Safety, Codes and Standards Program. Part 4: Hydrogen Sensors; Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buttner, William J.; Rivkin, Carl; Burgess, Robert

Hydrogen sensors are recognized as a critical element in the safety design for any hydrogen system. In this role, sensors can perform several important functions including indication of unintended hydrogen releases, activation of mitigation strategies to preclude the development of dangerous situations, activation of alarm systems and communication to first responders, and to initiate system shutdown. The functionality of hydrogen sensors in this capacity is decoupled from the system being monitored, thereby providing an independent safety component that is not affected by the system itself. The importance of hydrogen sensors has been recognized by DOE and by the Fuel Cellmore » Technologies Office's Safety and Codes Standards (SCS) program in particular, which has for several years supported hydrogen safety sensor research and development. The SCS hydrogen sensor programs are currently led by the National Renewable Energy Laboratory, Los Alamos National Laboratory, and Lawrence Livermore National Laboratory. The current SCS sensor program encompasses the full range of issues related to safety sensors, including development of advance sensor platforms with exemplary performance, development of sensor-related code and standards, outreach to stakeholders on the role sensors play in facilitating deployment, technology evaluation, and support on the proper selection and use of sensors.« less

Evaluating the Cost, Safety, and Proliferation Risks of Small Floating Nuclear Reactors.

PubMed

Ford, Michael J; Abdulla, Ahmed; Morgan, M Granger

2017-11-01

It is hard to see how our energy system can be decarbonized if the world abandons nuclear power, but equally hard to introduce the technology in nonnuclear energy states. This is especially true in countries with limited technical, institutional, and regulatory capabilities, where safety and proliferation concerns are acute. Given the need to achieve serious emissions mitigation by mid-century, and the multidecadal effort required to develop robust nuclear governance institutions, we must look to other models that might facilitate nuclear plant deployment while mitigating the technology's risks. One such deployment paradigm is the build-own-operate-return model. Because returning small land-based reactors containing spent fuel is infeasible, we evaluate the cost, safety, and proliferation risks of a system in which small modular reactors are manufactured in a factory, and then deployed to a customer nation on a floating platform. This floating small modular reactor would be owned and operated by a single entity and returned unopened to the developed state for refueling. We developed a decision model that allows for a comparison of floating and land-based alternatives considering key International Atomic Energy Agency plant-siting criteria. Abandoning onsite refueling is beneficial, and floating reactors built in a central facility can potentially reduce the risk of cost overruns and the consequences of accidents. However, if the floating platform must be built to military-grade specifications, then the cost would be much higher than a land-based system. The analysis tool presented is flexible, and can assist planners in determining the scope of risks and uncertainty associated with different deployment options. © 2017 Society for Risk Analysis.

77 FR 55755 - Small Business Size Standards: Agriculture, Forestry, Fishing, and Hunting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-11

...: Agriculture, Forestry, Fishing, and Hunting AGENCY: U.S. Small Business Administration. ACTION: Proposed rule... for 11 industries in North American Industry Classification System (NAICS) Sector 11, Agriculture... standards was published in the Federal Register on July 18, 2008 (73 FR 41237). NAICS 11, Agriculture...

Small business owners' opinions about written health and safety information.

PubMed

Brosseau, Lisa M; Fredrickson, Ann L; Casey, Mary Anne

2007-04-01

Owners of small manufacturing businesses from twelve industrial sectors (n=40) participated in focus groups. They most frequently read trade and local business publications; few regularly read or receive health and safety materials. They select business-related materials that are specific to their business, give them new ideas, or have information that is easy to use. Insurance companies and business associations are the most frequently mentioned sources of health and safety information. The most important aspects of a prototype newsletter are sponsorship, color and graphics, length and relevance. Most are positive about a university logo, because it indicates a trusted source. The front page should have a table of contents with short descriptions of articles and catchy headlines. A newsletter should take no more than ten minutes to read. Owners did not like articles that were written in first person, used quotes, were too personal or gave no solutions. Owners think a newsletter will be successful if it is targeted to their industry, shows costs, includes case studies about local businesses, isn't too academic, focuses on a different topic with each issue, and gives readers an opportunity to provide feedback.

78 FR 52679 - Safety Standard for Cigarette Lighters; Adjusted Customs Value for Cigarette Lighters

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-26

... Customs Value for Cigarette Lighters AGENCY: Consumer Product Safety Commission. ACTION: Final rule... refillable lighters that use butane or similar fuels and have a Customs Value or ex-factory price below a threshold value (initially set at $2.00 in 1993). The standard provides that the initial $2.00 value adjusts...

Investigating the influence on safety of retrofitting Italian motorways with barriers meeting a new EU standard.

PubMed

Cafiso, Salvatore; D'Agostino, Carmelo; Persaud, Bhagwant

2017-04-03

A new European Union (EU) regulation for safety barriers, which is based on performance, has encouraged road agencies to perform an upgrade of old barriers, with the expectation that there will be safety benefits at the retrofitted sites. The new class of barriers was designed and installed in compliance with the 1998 (European Norm) EN 1317 standards for road restraint systems, which lays down common requirements for the testing and certification of road restraint systems in all countries of the European Committee for Standardization (CEN). Both the older and new barriers are made of steel and are installed in such a way as to avoid vehicle intrusion, but the older ones are thought to be only effective at low speeds and large angles of impact. The new standard seeks to remedy this by providing better protection at higher speeds. This article seeks to quantify the effect on the frequency of fatal and injury crashes of retrofitting motorways with barriers meeting the new standards. The estimation of the crash modification was carried out by performing an empirical Bayes before-after analysis based on data from the A18 Messina-Catania motorway in Italy. The methodology has the great advantage to account for the regression to the mean effects. Besides, to account for time trend effects and dispersion of crash data, a modified calibration methodology of safety performance was used. This study, based on data collected on 76 km of motorway in the period 2000-2012, derived Crash Modification Factor point estimates that indicate reductions of 72% for run-off-road fatal and injury crashes and 38% in total fatal and injury crashes that could be expected by upgrading an old safety barrier by complying with new EU 1317 standards. The estimated benefit-cost ratio of 5.57 for total crashes indicates that the treatment is cost effective. The magnitude of this benefit indicates that the retrofits are cost-effective even for total crashes and should continue in any European country

Assessing the Relative Influence and Efficacy of Public and Private Food Safety Regulation Regimes: Comparing Codex and Global G.A.P. Standards.

PubMed

Halabi, Sam F; Lin, Ching-Fu

An extensive global system of private food regulation is under construction, one that exceeds conventional regulation thought of as being driven by public authorities like FDA and USDA in the U.S. or the Food Standards Agency in the UK. Agrifood and grocer organizations, in concert with some farming groups, have been the primary designers of this new food regulatory regime. These groups have established alliances that compete with national regulators in complex ways. This article analyzes the relationship between public and private sources of food safety regulation by examining standards adopted by the Codex Alimentarius Commission, a food safety organization jointly run by the Food and Agricultural Organization and the World Health Organization and GlobalG.A.P., a farm assurance program created in the late 1990s by supermarket chains and their major suppliers which has now expanded into a global certifying coalition. While Codex standards are adopted, often as written, by national food safety regulators who are principal drivers of the standard setting process, customers for agricultural products in many countries now demand evidence of GlobalG.A.P. certification as a prerequisite for doing business This article tests not only the durability and strength of private sector standard setting in the food safety system, but also the desirability of that system as an alternative to formal, governmental processes embodied, for our purposes, in the standards adopted by Codex. In many cases, official standards and GlobalG.A.P. standards clash in ways that implicate not only food safety but the flow of agricultural products in the global trading system. The article analyzes current weaknesses in both regimes and possibilities for change that will better reconcile the two competing systems.

Safety and efficacy of nivolumab and standard chemotherapy drug combination in patients with advanced non-small-cell lung cancer: a four arms phase Ib study

PubMed Central

Kanda, S.; Goto, K.; Shiraishi, H.; Kubo, E.; Tanaka, A.; Utsumi, H.; Sunami, K.; Kitazono, S.; Mizugaki, H.; Horinouchi, H.; Fujiwara, Y.; Nokihara, H.; Yamamoto, N.; Hozumi, H.; Tamura, T.

2016-01-01

Background The human IgG4 monoclonal antibody nivolumab targets programmed cell death-1 (PD-1) and promotes antitumor response by blocking the interaction of PD-1 with its ligands. This single-center phase Ib study investigated the tolerability, safety, and pharmacokinetics of nivolumab combined with standard chemotherapy in patients with advanced non-small-cell lung cancer (NSCLC). Patients and methods Patients who had stage IIIB without indication for definitive radiotherapy, stage IV, or recurrent NSCLC were eligible. Regimens were nivolumab 10 mg/kg + gemcitabine/cisplatin (arm A), pemetrexed/cisplatin (arm B), paclitaxel/carboplatin/bevacizumab (arm C), or docetaxel (arm D). Regimens A, B, and D were repeated every 3 weeks for up to four cycles and regimen C was repeated for up to six cycles; nivolumab alone (arm A), with pemetrexed (arm B), bevacizumab (arm C), or docetaxel (arm D) was continued every 3 weeks as maintenance therapy until disease progression or unacceptable toxicity. Dose-limiting toxicity (DLT) was evaluated during the first treatment cycle. Results As of March 2014, six patients were enrolled in each arm. The combination of nivolumab 10 mg/kg and chemotherapy was well tolerated. DLT was observed in only one patient in arm A (alanine aminotransferase increased). Select adverse events (those with a potential immunologic cause) of any grade were observed in six, four, six, and five patients in arms A, B, C, and D, respectively. Three, three, six, and one patient achieved partial response while median progression-free survival was 6.28, 9.63 months, not reached, and 3.15 months in arms A, B, C, and D, respectively. Conclusions Combination of nivolumab 10 mg/kg and chemotherapy showed an acceptable toxicity profile and encouraging antitumor activity in patients with advanced NSCLC. Clinical trials number Japanese Pharmaceutical Information Center Clinical Trials Information (JapicCTI)-132071. PMID:27765756

Safety and efficacy of nivolumab and standard chemotherapy drug combination in patients with advanced non-small-cell lung cancer: a four arms phase Ib study.

PubMed

Kanda, S; Goto, K; Shiraishi, H; Kubo, E; Tanaka, A; Utsumi, H; Sunami, K; Kitazono, S; Mizugaki, H; Horinouchi, H; Fujiwara, Y; Nokihara, H; Yamamoto, N; Hozumi, H; Tamura, T

2016-12-01

The human IgG4 monoclonal antibody nivolumab targets programmed cell death-1 (PD-1) and promotes antitumor response by blocking the interaction of PD-1 with its ligands. This single-center phase Ib study investigated the tolerability, safety, and pharmacokinetics of nivolumab combined with standard chemotherapy in patients with advanced non-small-cell lung cancer (NSCLC). Patients who had stage IIIB without indication for definitive radiotherapy, stage IV, or recurrent NSCLC were eligible. Regimens were nivolumab 10 mg/kg + gemcitabine/cisplatin (arm A), pemetrexed/cisplatin (arm B), paclitaxel/carboplatin/bevacizumab (arm C), or docetaxel (arm D). Regimens A, B, and D were repeated every 3 weeks for up to four cycles and regimen C was repeated for up to six cycles; nivolumab alone (arm A), with pemetrexed (arm B), bevacizumab (arm C), or docetaxel (arm D) was continued every 3 weeks as maintenance therapy until disease progression or unacceptable toxicity. Dose-limiting toxicity (DLT) was evaluated during the first treatment cycle. As of March 2014, six patients were enrolled in each arm. The combination of nivolumab 10 mg/kg and chemotherapy was well tolerated. DLT was observed in only one patient in arm A (alanine aminotransferase increased). Select adverse events (those with a potential immunologic cause) of any grade were observed in six, four, six, and five patients in arms A, B, C, and D, respectively. Three, three, six, and one patient achieved partial response while median progression-free survival was 6.28, 9.63 months, not reached, and 3.15 months in arms A, B, C, and D, respectively. Combination of nivolumab 10 mg/kg and chemotherapy showed an acceptable toxicity profile and encouraging antitumor activity in patients with advanced NSCLC. Japanese Pharmaceutical Information Center Clinical Trials Information (JapicCTI)-132071. © The Author 2016. Published by Oxford University Press on behalf of the European Society for Medical Oncology.

The Unknown Oldowan: ~1.7-Million-Year-Old Standardized Obsidian Small Tools from Garba IV, Melka Kunture, Ethiopia

PubMed Central

2015-01-01

The Oldowan Industrial Complex has long been thought to have been static, with limited internal variability, embracing techno-complexes essentially focused on small-to-medium flake production. The flakes were rarely modified by retouch to produce small tools, which do not show any standardized pattern. Usually, the manufacture of small standardized tools has been interpreted as a more complex behavior emerging with the Acheulean technology. Here we report on the ~1.7 Ma Oldowan assemblages from Garba IVE-F at Melka Kunture in the Ethiopian highland. This industry is structured by technical criteria shared by the other East African Oldowan assemblages. However, there is also evidence of a specific technical process never recorded before, i.e. the systematic production of standardized small pointed tools strictly linked to the obsidian exploitation. Standardization and raw material selection in the manufacture of small tools disappear at Melka Kunture during the Lower Pleistocene Acheulean. This proves that 1) the emergence of a certain degree of standardization in tool-kits does not reflect in itself a major step in cultural evolution; and that 2) the Oldowan knappers, when driven by functional needs and supported by a highly suitable raw material, were occasionally able to develop specific technical solutions. The small tool production at ~1.7 Ma, at a time when the Acheulean was already emerging elsewhere in East Africa, adds to the growing amount of evidence of Oldowan techno-economic variability and flexibility, further challenging the view that early stone knapping was static over hundreds of thousands of years. PMID:26690569

The Unknown Oldowan: ~1.7-Million-Year-Old Standardized Obsidian Small Tools from Garba IV, Melka Kunture, Ethiopia.

PubMed

Gallotti, Rosalia; Mussi, Margherita

2015-01-01

The Oldowan Industrial Complex has long been thought to have been static, with limited internal variability, embracing techno-complexes essentially focused on small-to-medium flake production. The flakes were rarely modified by retouch to produce small tools, which do not show any standardized pattern. Usually, the manufacture of small standardized tools has been interpreted as a more complex behavior emerging with the Acheulean technology. Here we report on the ~1.7 Ma Oldowan assemblages from Garba IVE-F at Melka Kunture in the Ethiopian highland. This industry is structured by technical criteria shared by the other East African Oldowan assemblages. However, there is also evidence of a specific technical process never recorded before, i.e. the systematic production of standardized small pointed tools strictly linked to the obsidian exploitation. Standardization and raw material selection in the manufacture of small tools disappear at Melka Kunture during the Lower Pleistocene Acheulean. This proves that 1) the emergence of a certain degree of standardization in tool-kits does not reflect in itself a major step in cultural evolution; and that 2) the Oldowan knappers, when driven by functional needs and supported by a highly suitable raw material, were occasionally able to develop specific technical solutions. The small tool production at ~1.7 Ma, at a time when the Acheulean was already emerging elsewhere in East Africa, adds to the growing amount of evidence of Oldowan techno-economic variability and flexibility, further challenging the view that early stone knapping was static over hundreds of thousands of years.

THE DEVELOPMENT OF A STANDARDIZED ACHIEVEMENT TEST FOR SMALL GASOLINE ENGINE INSTRUCTION.

ERIC Educational Resources Information Center

EBBERT, J. MARVIN

THE PURPOSE OF THE STUDY WAS TO DEVELOP A STANDARDIZED, MULTIPLE-CHOICE ACHIEVEMENT TEST ON THE OPERATION, CARE, AND MAINTENANCE OF SMALL GASOLINE ENGINES. OBJECTIVES AND A UNIT OUTLINE WERE DEVELOPED WITH THE COOPERATION OF 75 INDIANA VOCATIONAL AGRICULTURE TEACHERS. A PANEL SUGGESTED MODIFICATIONS, AND THE REFINED OBJECTIVES AND OUTLINE WERE…

A qualitative evaluation of owner and worker health and safety beliefs in small auto collision repair shops.

PubMed

Parker, David L; Bejan, Anca; Brosseau, Lisa M

2012-05-01

About 223,000 people are employed in approximately 34,500 auto collision repair businesses. In general, employees and owners in these establishments lack knowledge of health and safety practices and do not have the technical expertise to make their place of work safer. Three employee and three owner focus groups were conducted. The goal of these focus groups was to characterize health and safety beliefs of owners and employees and to determine the best methods for motivating safety improvements in collision repair shops. A total of 11 owners and 19 workers participated in these focus groups. Employees and owners were aware of a wide range of hazards. Both groups noted difficulty in staying informed. Employers were hesitant to set and enforce safety and health rules. Employees perceive owners to be unwilling to dedicate the resources to make the workplace safer and provide personal protective equipment. Both groups felt insurance reimbursement practices placed undue pressure on employees. Focus groups provide important insights into intervention development in very small enterprises in general and auto collision shops in specific. Employers were conflicted about allowing employees a certain level of independence while also maintaining a safe workplace. From the employee perspective, owners frequently fail to provide adequate personal protective equipment and make improvements needed to ensure safe work. The unique managerial needs of very small enterprises must be accounted for if health and safety programs are to be implemented in these establishments. Copyright © 2012 Wiley Periodicals, Inc.

A Battery Certification Testbed for Small Satellite Missions

NASA Technical Reports Server (NTRS)

Cameron, Zachary; Kulkarni, Chetan S.; Luna, Ali Guarneros; Goebel, Kai; Poll, Scott

2015-01-01

A battery pack consisting of standard cylindrical 18650 lithium-ion cells has been chosen for small satellite missions based on previous flight heritage and compliance with NASA battery safety requirements. However, for batteries that transit through the International Space Station (ISS), additional certification tests are required for individual cells as well as the battery packs. In this manuscript, we discuss the development of generalized testbeds for testing and certifying different types of batteries critical to small satellite missions. Test procedures developed and executed for this certification effort include: a detailed physical inspection before and after experiments; electrical cycling characterization at the cell and pack levels; battery-pack overcharge, over-discharge, external short testing; battery-pack vacuum leak and vibration testing. The overall goals of these certification procedures are to conform to requirements set forth by the agency and identify unique safety hazards. The testbeds, procedures, and experimental results are discussed for batteries chosen for small satellite missions to be launched from the ISS.

Management of occupational health risks in small-animal veterinary practices.

PubMed

D'Souza, Eva; Barraclough, Richard; Fishwick, David; Curran, Andrew

2009-08-01

Small-animal work is a major element of veterinary practice in the UK and may be hazardous, with high levels of work-related injuries and ill-health reported in Australia and USA. There are no studies addressing the management of occupational health risks arising from small-animal work in the UK. To investigate the sources of health and safety information used and how health and safety and 12 specific occupational health risks are managed by practices. A cross-sectional postal survey of all small-animal veterinary practices in Hampshire. A response was mandatory as this was a Health & Safety Executive (HSE) inspection activity. A total of 118 (100%) practices responded of which 93 were eligible for inclusion. Of these, 99 and 86%, respectively, were aware of the Royal College of Veterinary Surgeons (RCVS) practice standards and had British Small Animal Veterinary Association (BSAVA) staff members, while only 51% had previous contact with HSE (publications, advice and visit). Ninety per cent had health and safety policies, but only 31% had trained responsible staff in health and safety. Specific health hazards such as occupational allergens and computer use were relatively overlooked both by practices and the RCVS/BSAVA guidance available in 2002. Failings in active health risk management systems could be due to a lack of training to ensure competence in those with responsibilities. Practices rely on guidance produced by their professional bodies. Current RCVS guidance, available since 2005, has remedied some previous omissions, but further improvements are recommended.

Provisional standards of radiation safety of flight personnel and passengers in air transport of the civil aviation

NASA Technical Reports Server (NTRS)

1977-01-01

Provisional standards for radiation affecting passenger aircraft are considered. Agencies responsible for seeing that the regulations are enforced are designated while radiation sources and types of radiation are defined. Standard levels of permissible radiation are given and conditions for radiation safety are discussed. Dosimetric equipment on board aircraft is delineated and regulation effective dates are given.

The History of Infant Formula: Quality, Safety, and Standard Methods.

PubMed

Wargo, Wayne F

2016-01-01

Food-related laws and regulations have existed since ancient times. Egyptian scrolls prescribed the labeling needed for certain foods. In ancient Athens, beer and wines were inspected for purity and soundness, and the Romans had a well-organized state food control system to protect consumers from fraud or bad produce. In Europe during the Middle Ages, individual countries passed laws concerning the quality and safety of eggs, sausages, cheese, beer, wine, and bread; some of these laws still exist today. But more modern dietary guidelines and food regulations have their origins in the latter half of the 19th century when the first general food laws were adopted and basic food control systems were implemented to monitor compliance. Around this time, science and food chemistry began to provide the tools to determine "purity" of food based primarily on chemical composition and to determine whether it had been adulterated in any way. Since the key chemical components of mammalian milk were first understood, infant formulas have steadily advanced in complexity as manufacturers attempt to close the compositional gap with human breast milk. To verify these compositional innovations and ensure product quality and safety, infant formula has become one of the most regulated foods in the world. The present paper examines the historical development of nutritional alternatives to breastfeeding, focusing on efforts undertaken to ensure the quality and safety from antiquity to present day. The impact of commercial infant formulas on global regulations is addressed, along with the resulting need for harmonized, fit-for-purpose, voluntary consensus standard methods.

76 FR 53102 - Federal Motor Vehicle Safety Standards; Denial of Petition for Rulemaking; School Buses

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-25

... chronological order): Studies NTSB, 1987 In 1987, the NTSB reported on its investigation of forty-three post... seat belts by using the sled test data obtained from NHTSA's 2002 school bus safety study. For... incorporate test procedures to test lap/shoulder belts in small school buses and voluntarily-installed lap...

The natural selection of organizational and safety culture within a small to medium sized enterprise (SME).

PubMed

Brooks, Benjamin

2008-01-01

Small to Medium Sized Enterprises (SMEs) form the majority of Australian businesses. This study uses ethnographic research methods to describe the organizational culture of a small furniture-manufacturing business in southern Australia. Results show a range of cultural assumptions variously 'embedded' within the enterprise. In line with memetics - Richard Dawkin's cultural application of Charles Darwin's theory of Evolution by Natural Selection, the author suggests that these assumptions compete to be replicated and retained within the organization. The author suggests that dominant assumptions are naturally selected, and that the selection can be better understood by considering the cultural assumptions in reference to Darwin's original principles and Frederik Barth's anthropological framework of knowledge. The results are discussed with reference to safety systems, negative cultural elements called Cultural Safety Viruses, and how our understanding of this particular organizational culture might be used to build resistance to these viruses.

78 FR 76751 - Safety Zone; Vessel Launch; Menominee River; Marinette, WI

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-19

... Agriculture Regulatory Enforcement Ombudsman and the Regional Small Business Regulatory Fairness Boards. The... consensus standards. 14. Environment We have analyzed this rule under Department of Homeland Security... significant effect on the human environment. This rule involves the establishment of a safety zone and...

Fire Safety of Passenger Trains : Phase II : Application of Fire Hazard Analysis Techniques

DOT National Transportation Integrated Search

2001-12-01

On May 12, 1999, the Federal Railroad Administration (FRA) issued regulations for passenger rail equipment safety standards that included small-scale fire tests and performance criteria to evaluate the flammability and smoke characteristics of indivi...

Fire safety of passenger trains. Phase II, Application of fire hazard analysis techniques.

DOT National Transportation Integrated Search

2001-12-01

On May 12, 1999, the Federal Railroad Administration (FRA) issued regulations for passenger rail equipment safety standards that included small-scale fire tests and performance criteria to evaluate the flammability and smoke characteristics of indivi...

The labor movement's role in gaining federal safety and health standards to protect America's workers.

PubMed

Weinstock, Deborah; Failey, Tara

2014-11-01

In the United States, unions sometimes joined by worker advocacy groups (e.g., Public Citizen and the American Public Health Association) have played a critical role in strengthening worker safety and health protections. They have sought to improve standards that protect workers by participating in the rulemaking process, through written comments and involvement in hearings; lobbying decision-makers; petitioning the Department of Labor; and defending improved standards in court. Their efforts have culminated in more stringent exposure standards, access to information about the presence of potentially hazardous toxic chemicals, and improved access to personal protective equipment-further improving working conditions in the United States.

12 CFR Appendix C to Part 1720 - Policy Guidance; Safety and Soundness Standards for Information

Code of Federal Regulations, 2012 CFR

2012-01-01

... for Information C Appendix C to Part 1720 Banks and Banking OFFICE OF FEDERAL HOUSING ENTERPRISE..., App. C Appendix C to Part 1720—Policy Guidance; Safety and Soundness Standards for Information A... for Information 1. Information Security Program. 2. Objectives. C—Development and Implementation of...

12 CFR Appendix C to Part 1720 - Policy Guidance; Safety and Soundness Standards for Information

Code of Federal Regulations, 2010 CFR

2010-01-01

... for Information C Appendix C to Part 1720 Banks and Banking OFFICE OF FEDERAL HOUSING ENTERPRISE..., App. C Appendix C to Part 1720—Policy Guidance; Safety and Soundness Standards for Information A... for Information 1. Information Security Program. 2. Objectives. C—Development and Implementation of...

Improving health, safety and energy efficiency in New Zealand through measuring and applying basic housing standards.

PubMed

Gillespie-Bennett, Julie; Keall, Michael; Howden-Chapman, Philippa; Baker, Michael G

2013-08-02

Substandard housing is a problem in New Zealand. Historically there has been little recognition of the important aspects of housing quality that affect people's health and safety. In this viewpoint article we outline the importance of assessing these factors as an essential step to improving the health and safety of New Zealanders and household energy efficiency. A practical risk assessment tool adapted to New Zealand conditions, the Healthy Housing Index (HHI), measures the physical characteristics of houses that affect the health and safety of the occupants. This instrument is also the only tool that has been validated against health and safety outcomes and reported in the international peer-reviewed literature. The HHI provides a framework on which a housing warrant of fitness (WOF) can be based. The HHI inspection takes about one hour to conduct and is performed by a trained building inspector. To maximise the effectiveness of this housing quality assessment we envisage the output having two parts. The first would be a pass/fail WOF assessment showing whether or not the house meets basic health, safety and energy efficiency standards. The second component would rate each main assessment area (health, safety and energy efficiency), potentially on a five-point scale. This WOF system would establish a good minimum standard for rental accommodation as well encouraging improved housing performance over time. In this article we argue that the HHI is an important, validated, housing assessment tool that will improve housing quality, leading to better health of the occupants, reduced home injuries, and greater energy efficiency. If required, this tool could be extended to also cover resilience to natural hazards, broader aspects of sustainability, and the suitability of the dwelling for occupants with particular needs.

Identifying high-risk small business industries for occupational safety and health interventions.

PubMed

Okun, A; Lentz, T J; Schulte, P; Stayner, L

2001-03-01

Approximately one-third (32%) of U.S. workers are employed in small business industries (those with 80% of workers in establishments with fewer than 100 employees), and approximately 53 million persons in private industry work in small business establishments. This study was performed to identify small business industries at high risk for occupational injuries, illnesses, and fatalities. Small business industries were identified from among all three- and four-digit Standard Industrial Classification (SIC) codes and ranked using Bureau of Labor Statistics (BLS) data by rates and numbers of occupational injuries, illnesses, and fatalities. Both incidence rates and number of injury, illness, and fatality cases were evaluated. The 253 small business industries identified accounted for 1,568 work-related fatalities (34% of all private industry). Transportation incidents and violent acts were the leading causes of these fatalities. Detailed injury and illness data were available for 105 small business industries, that accounted for 1,476,400 work-related injuries, and 55,850 occupational illnesses. Many of the small business industries had morbidity and mortality rates exceeding the average rates for all private industry. The highest risk small business industries, based on a combined morbidity and mortality index, included logging, cut stone and stone products, truck terminals, and roofing, siding, and sheet metal work. Identification of high-risk small business industries indicates priorities for those interested in developing targeted prevention programs.

77 FR 76003 - Submission for OMB Review; Comment Request-Safety Standard for Omnidirectional Citizens Band Base...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-26

... Request--Safety Standard for Omnidirectional Citizens Band Base Station Antennas AGENCY: Consumer Product... antennas. DATES: Written comments on this request for extension of approval of information collection... Citizens Band Base Station Antennas establishes performance requirements for omnidirectional citizens band...

77 FR 20558 - Federal Motor Vehicle Safety Standards; Platform Lifts for Motor Vehicles; Platform Lift...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-05

... amendments to the Federal motor vehicle safety standards on platform lift systems for motor vehicles. The... [email protected] . For legal issues, you may contact David Jasinski, Office of the Chief Counsel, NCC... in the Federal Register a final rule establishing FMVSS No. 403, Platform lift systems for motor...

77 FR 53769 - Receipts-Based, Small Business Size Standard; Confirmation of Effective Date

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-04

...-Based, Small Business Size Standard; Confirmation of Effective Date AGENCY: Nuclear Regulatory Commission. ACTION: Direct final rule; confirmation of effective date. SUMMARY: The U.S. Nuclear Regulatory Commission (NRC) is confirming the effective date of August 22, 2012, for the direct final rule that appeared...

Safety and Health Hazard Observations in Hmong Farming Operations

PubMed Central

Neitzel, R. L.; Krenz, J.; de Castro, A. B.

2014-01-01

Agricultural workers have a high risk of occupational injuries, illnesses, and fatalities. However, there are very few standardized tools available to assess safety and health in agricultural operations. Additionally, there are a number of groups of agricultural workers, including Hmong refugees and immigrants, for which virtually no information on safety and health conditions is available. This study developed an observation-based methodology for systematically evaluating occupational health and safety hazards in agriculture, and pilot-tested this on several small-scale Hmong farming operations. Each observation assessed of range of safety and health hazards (e.g., musculoskeletal hazards, dust and pollen, noise, and mechanical hazards), as well as on factors such as type of work area, presence of personal protective equipment, and weather conditions. Thirty-six observations were collected on nine farms. The most common hazards observed were bending at the back and lifting <50 pounds. Use of sharp tools without adequate guarding mechanisms, awkward postures, repetitive hand motions, and lifting >50 pounds were also common. The farming activities observed involved almost no power equipment, and no pesticide or chemical handling was observed. The use of personal protective equipment was uncommon. The results of this assessment agreed well with a parallel study of perceived safety and health hazards among Hmong agricultural workers. This study suggests that small-scale Hmong farming operations involve a variety of hazards, and that occupational health interventions may be warranted in this community. The study also demonstrates the utility of standardized assessment tools and mixed-method approaches to hazard evaluation. PMID:24911689

Analysis of medical screening and surveillance in 21 Occupational Safety and Health Administration standards: support for a generic medical surveillance standard.

PubMed

Silverstein, M

1994-09-01

Twenty-one Occupational Safety and Health Act (OSHA) standards were identified which contain medical service provisions intended to help in the identification and control of harmful health effects of workplace exposures. The utility and effectiveness of these provisions have not previously been evaluated. All 21 standards were reviewed and assigned numerical scores for each of 24 potential medical program elements. Several of these elements were combined to calculate Quality Control, Screening Utility, and Surveillance Utility scores for each standard. Total scores varied greatly, suggesting a lack of consistency and uniformity which was even more obvious when the actual regulatory language was examined. The mean Quality score was only 26% of potential points. Seventeen of 21 standards received less than half the total possible Quality score. When arrayed on a two by two matrix only two standards scored above 50% for both Screening and Surveillance Utility. It was concluded that the medical service provisions in OSHA standards are lacking in consistency and coherence. Two major shortcomings are the lack of quality control elements and the absence of surveillance features which would permit medical program results to be utilized for prevention activities including the identification and control of workplace hazards. A generic occupational medical surveillance standard could address these current weaknesses. Elements of such a generic standard are proposed.

Findings From the National Machine Guarding Program–A Small Business Intervention

PubMed Central

Parker, David L.; Yamin, Samuel C.; Xi, Min; Brosseau, Lisa M.; Gordon, Robert; Most, Ivan G.; Stanley, Rodney

2016-01-01

Objectives: The purpose of this nationwide intervention was to improve machine safety in small metal fabrication businesses (3 to 150 employees). The failure to implement machine safety programs related to guarding and lockout/tagout (LOTO) are frequent causes of Occupational Safety and Health Administration (OSHA) citations and may result in serious traumatic injury. Methods: Insurance safety consultants conducted a standardized evaluation of machine guarding, safety programs, and LOTO. Businesses received a baseline evaluation, two intervention visits, and a 12-month follow-up evaluation. Results: The intervention was completed by 160 businesses. Adding a safety committee was associated with a 10% point increase in business-level machine scores (P < 0.0001) and a 33% point increase in LOTO program scores (P < 0.0001). Conclusions: Insurance safety consultants proved effective at disseminating a machine safety and LOTO intervention via management-employee safety committees. PMID:27466709

12 CFR Appendix A to Part 30 - Interagency Guidelines Establishing Standards for Safety and Soundness

Code of Federal Regulations, 2013 CFR

2013-01-01

... establish certain safety and soundness standards by regulation or by guideline for all insured depository... rules and regulations to establish deadlines for submission and review of compliance plans. 2 2 For the Office of the Comptroller of the Currency, these regulations appear at 12 CFR part 30; for the Board of...

12 CFR Appendix A to Part 170 - Interagency Guidelines Establishing Standards for Safety and Soundness

Code of Federal Regulations, 2013 CFR

2013-01-01

... agencies) to establish certain safety and soundness standards by regulation or by guideline for all insured... adopted amendments to their rules and regulations to establish deadlines for submission and review of compliance plans.2 2 For the Office of the Comptroller of the Currency, these regulations appear at 12 CFR...

Green lasers are beyond power limits mandated by safety standards.

PubMed

Lee, M H; Fox, K; Goldwasser, S; Lau, D W M; Aliahmad, B; Sarossy, M

2016-08-01

There has been an increasing number of reports of people losing vision from laser exposure from pocket laser pointers despite the safety limit of 1 milliwatt (1mW) imposed by the Australian government. We hypothesize that this is because commercially available red and green laser pointers are exceeding their labeled power outputs. We tested the power outputs of 4 red and 4 green lasers which were purchased for less than AUD$30 each. The average of 10 measurements was recorded for each laser. We found that 3 out of 4 red lasers conformed to the 1mW safety standard; in contrast, all of the green lasers exceeded this limit, with one of the lasers recording an output of 127.9 mW. This contrast in compliance is explained by the construction of these lasers - green lasers are typically Diode Pumped Solid State (DPSS) lasers that can emit excessive infrared (IR) radiation with poor workmanship or inconsistent adherence to practices of safe design and quality control; red lasers are diode lasers which have limited power outputs due to `Catastrophic Optical Damage' (COD). Relevant professional bodies ought to advocate more strongly for stringent testing, quality control and licensing of DPSS lasers with a view towards government intervention to banning green laser pointer use.

78 FR 37409 - Small Business Size Standards: Finance and Insurance and Management of Companies and Enterprises

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-20

...The U.S. Small Business Administration (SBA) is increasing small business size standards for 36 industries in North American Industry Classification System (NAICS) Sector 52, Finance and Insurance, and for two industries in NAICS Sector 55, Management of Companies and Enterprises. In addition, SBA is changing the basis for measuring size from assets to annual receipts for one industry in NAICS Sector 52, namely, NAICS 522293, International Trade Financing. Finally, SBA is deleting NAICS 525930, Real Estate Investment Trusts, from its table of size standards. The U.S. Office of Management and Budget (OMB) included the financial activities formerly included in NAICS 525930 in NAICS 531110, NAICS 531120, NAICS 531130, NAICS 531190, and NAICS 525990. As part of its ongoing comprehensive size standards review, SBA evaluated all receipts based and assets based size standards in NAICS Sectors 52 and 55 to determine whether they should be retained or revised. SBA did not review the 1,500-employee size standard for NAICS 524126, Direct Property and Casualty Insurance Carriers, which it will review in the near future with other employee based size standards. This final rule is one of a series of final rules that will review size standards of industries grouped by NAICS Sectors.

Mobile phone radiation health risk controversy: the reliability and sufficiency of science behind the safety standards.

PubMed

Leszczynski, Dariusz; Xu, Zhengping

2010-01-27

There is ongoing discussion whether the mobile phone radiation causes any health effects. The International Commission on Non-Ionizing Radiation Protection, the International Committee on Electromagnetic Safety and the World Health Organization are assuring that there is no proven health risk and that the present safety limits protect all mobile phone users. However, based on the available scientific evidence, the situation is not as clear. The majority of the evidence comes from in vitro laboratory studies and is of very limited use for determining health risk. Animal toxicology studies are inadequate because it is not possible to "overdose" microwave radiation, as it is done with chemical agents, due to simultaneous induction of heating side-effects. There is a lack of human volunteer studies that would, in unbiased way, demonstrate whether human body responds at all to mobile phone radiation. Finally, the epidemiological evidence is insufficient due to, among others, selection and misclassification bias and the low sensitivity of this approach in detection of health risk within the population. This indicates that the presently available scientific evidence is insufficient to prove reliability of the current safety standards. Therefore, we recommend to use precaution when dealing with mobile phones and, whenever possible and feasible, to limit body exposure to this radiation. Continuation of the research on mobile phone radiation effects is needed in order to improve the basis and the reliability of the safety standards.

Mobile phone radiation health risk controversy: the reliability and sufficiency of science behind the safety standards

PubMed Central

2010-01-01

There is ongoing discussion whether the mobile phone radiation causes any health effects. The International Commission on Non-Ionizing Radiation Protection, the International Committee on Electromagnetic Safety and the World Health Organization are assuring that there is no proven health risk and that the present safety limits protect all mobile phone users. However, based on the available scientific evidence, the situation is not as clear. The majority of the evidence comes from in vitro laboratory studies and is of very limited use for determining health risk. Animal toxicology studies are inadequate because it is not possible to "overdose" microwave radiation, as it is done with chemical agents, due to simultaneous induction of heating side-effects. There is a lack of human volunteer studies that would, in unbiased way, demonstrate whether human body responds at all to mobile phone radiation. Finally, the epidemiological evidence is insufficient due to, among others, selection and misclassification bias and the low sensitivity of this approach in detection of health risk within the population. This indicates that the presently available scientific evidence is insufficient to prove reliability of the current safety standards. Therefore, we recommend to use precaution when dealing with mobile phones and, whenever possible and feasible, to limit body exposure to this radiation. Continuation of the research on mobile phone radiation effects is needed in order to improve the basis and the reliability of the safety standards. PMID:20205835

Employers' perceptions and attitudes toward the Canadian national standard on psychological health and safety in the workplace: A qualitative study.

PubMed

Kunyk, Diane; Craig-Broadwith, Morgan; Morris, Heather; Diaz, Ruth; Reisdorfer, Emilene; Wang, JianLi

2016-01-01

The estimated societal and economic costs of mental illness and psychological injury in the workplace is staggering. Governments, employers and other stakeholders have been searching for policy solutions. This qualitative, exploratory study sought to uncover organizational receptivity to a voluntary comprehensive standard for dealing with psychological health and safety in the workplace. A series of five focus groups were conducted in a large Western Canadian city in November 2013. The seventeen participants were from the fields of healthcare, construction/utilities, manufacturing industries, business services, and finance. They worked in positions of management, consulting, human resources, health promotion, health and safety, mediation, and occupational health and represented organizations ranging in size from 20 to 100,000 employees. The findings confirm and illustrate the critical role that psychological health and safety plays across workplaces and occupations. This standard resonated across the represented organizations and fit with their values. This alignment posed challenges with articulating its added value. There appears to be a need for simplified engagement and implementation strategies of the standard that can be tailored to the nuanced differences between types and sizes of industries. It appears that organizations in the most need of improving psychological health and safety may be the least receptive. Copyright © 2015 Elsevier Ltd. All rights reserved.

76 FR 11418 - Rear Visibility; Federal Motor Vehicle Safety Standard, Rearview Mirrors; Federal Motor Vehicle...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-02

... mirrors to improve the ability of a driver of a vehicle to detect pedestrians in the area immediately..., NHTSA proposed to specify an area immediately behind each vehicle that the driver must be able to see... agency's Federal motor vehicle safety standard on rearview mirrors to improve the ability of a driver to...

77 FR 58747 - Small Business Size Standards: Real Estate and Rental and Leasing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-24

... anchor size standards is appropriate in the current economy; whether there are gaps in SBA's methodology... independent agent), employee based costs (such as wages and payroll taxes), and material costs. For SBA's size... Estate and Rental and Leasing AGENCY: U.S. Small Business Administration. ACTION: Final rule. SUMMARY...

A randomized, controlled intervention of machine guarding and related safety programs in small metal-fabrication businesses.

PubMed

Parker, David L; Brosseau, Lisa M; Samant, Yogindra; Xi, Min; Pan, Wei; Haugan, David

2009-01-01

Metal fabrication employs an estimated 3.1 million workers in the United States. The absence of machine guarding and related programs such as lockout/tagout may result in serious injury or death. The purpose of this study was to improve machine-related safety in small metal-fabrication businesses. We used a randomized trial with two groups: management only and management-employee. We evaluated businesses for the adequacy of machine guarding (machine scorecard) and related safety programs (safety audit). We provided all businesses with a report outlining deficiencies and prioritizing their remediation. In addition, the management-employee group received four one-hour interactive training sessions from a peer educator. We evaluated 40 metal-fabrication businesses at baseline and 37 (93%) one year later. Of the three nonparticipants, two had gone out of business. More than 40% of devices required for adequate guarding were missing or inadequate, and 35% of required safety programs and practices were absent at baseline. Both measures improved significantly during the course of the intervention. No significant differences in changes occurred between the two intervention groups. Machine-guarding practices and programs improved by up to 13% and safety audit scores by up to 23%. Businesses that added safety committees or those that started with the lowest baseline measures showed the greatest improvements. Simple and easy-to-use assessment tools allowed businesses to significantly improve their safety practices, and safety committees facilitated this process.

Construction managers' perceptions of construction safety practices in small and large firms: a qualitative investigation.

PubMed

Gillen, Marion; Kools, Susan; McCall, Cade; Sum, Juliann; Moulden, Kelli

2004-01-01

Despite the institution of explicit safety practices in construction, there continue to be exceedingly high rates of morbidity and mortality from work-related injury. This study's purpose was to identify, compare and contrast views of construction managers from large and small firms regarding construction safety practices. A complementary analysis was conducted with construction workers. A semi-structured interview guide was used to elicit information from construction managers (n = 22) in a series of focus groups. Questions were designed to obtain information on direct safety practices and indirect practices such as communication style, attitude, expectations, and unspoken messages. Data were analyzed using thematic content analysis. Managers identified a broad commitment to safety, worker training, a changing workplace culture, and uniform enforcement as key constructs in maintaining safe worksites. Findings indicate that successful managers need to be involved, principled, flexible, and innovative. Best practices, as well as unsuccessful injury prevention programs, were discussed in detail. Obstacles to consistent safety practice include poor training, production schedules and financial constraints. Construction managers play a pivotal role in the definition and implementation of safety practices in the workplace. In order to succeed in this role, they require a wide variety of management skills, upper management support, and tools that will help them instill and maintain a positive safety culture. Developing and expanding management skills of construction managers may assist them in dealing with the complexity of the construction work environment, as well as providing them with the tools necessary to decrease work-related injuries.

Dose limits to the lens of the eye: International Basic Safety Standards and related guidance.

PubMed

Boal, T J; Pinak, M

2015-06-01

The International Atomic Energy Agency (IAEA) safety requirements: 'General Safety Requirements Part 3--Radiation protection and safety of radiation sources: International Basic Safety Standards' (BSS) was approved by the IAEA Board of Governors at its meeting in September 2011, and was issued as General Safety Requirements Part 3 in July 2014. The equivalent dose limit for the lens of the eye for occupational exposure in planned exposure situations was reduced from 150 mSv year(-1) to 20 mSv year(-1), averaged over defined periods of 5 years, with no annual dose in a single year exceeding 50 mSv. This reduction in the dose limit for the lens of the eye followed the recommendation of the International Commission on Radiological Protection in its statement on tissue reactions of 21 April 2011. IAEA has developed guidance on the implications of the new dose limit for the lens of the eye. This paper summarises the process that led to the inclusion of the new dose limit for the lens of the eye in the BSS, and the implications of the new dose limit. © The International Society for Prosthetics and Orthotics Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Development of a medical information system that minimizes staff workload and secures system safety at a small medical institution

NASA Astrophysics Data System (ADS)

Haneda, Kiyofumi; Koyama, Tadashi

2005-04-01

We developed a secure system that minimizes staff workload and secures safety of a medical information system. In this study, we assess the legal security requirements and risks occurring from the use of digitized data. We then analyze the security measures for ways of reducing these risks. In the analysis, not only safety, but also costs of security measures and ease of operability are taken into consideration. Finally, we assess the effectiveness of security measures by employing our system in small-sized medical institution. As a result of the current study, we developed and implemented several security measures, such as authentications, cryptography, data back-up, and secure sockets layer protocol (SSL) in our system. In conclusion, the cost for the introduction and maintenance of a system is one of the primary difficulties with its employment by a small-sized institution. However, with recent reductions in the price of computers, and certain advantages of small-sized medical institutions, the development of an efficient system configuration has become possible.

A Model for Occupational Safety and Health Intervention Diffusion to Small Businesses

PubMed Central

Sinclair, Raymond C.; Cunningham, Thomas R.; Schulte, Paul A.

2015-01-01

Background Smaller businesses differ from their larger counterparts in having higher rates of occupational injuries and illnesses and fewer resources for preventing those losses. Intervention models developed outside the United States have addressed the resource deficiency issue by incorporating intermediary organizations such as trade associations. Methods This paper extends previous models by using exchange theory and by borrowing from the diffusion of innovations model. It emphasizes that occupational safety and health (OSH) organizations must understand as much about intermediary organizations as they do about small businesses. OSH organizations (“initiators”) must understand how to position interventions and information to intermediaries as added value to their relationships with small businesses. Examples from experiences in two midwestern states are used to illustrate relationships and types of analyses implied by the extended model. Results The study found that intermediary organizations were highly attuned to providing smaller businesses with what they want, including OSH services. The study also found that there are opinion leader organizations and individual champions within intermediaries who are key to decisions and actions about OSH programming. Conclusions The model places more responsibility on both initiators and intermediaries to develop and market interventions that will be valued in the competitive small business environment where the resources required to adopt each new business activity could always be used in other ways. The model is a candidate for empirical validation, and it offers some encouragement that the issue of sustainable OSH assistance to small businesses might be addressed. PMID:24115112

76 FR 64354 - Burden of Food and Drug Administration Food Safety Modernization Act Fee Amounts on Small...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-18

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2011-N-0529] Burden of Food and Drug Administration Food Safety Modernization Act Fee Amounts on Small Business; Extension of Comment Period AGENCY: Food and Drug Administration, HHS. ACTION: Notice; extension of comment...

Safety and Efficacy of ARA 290 in Sarcoidosis Patients with Symptoms of Small Fiber Neuropathy: A Randomized, Double-Blind Pilot Study

PubMed Central

Heij, Lara; Niesters, Marieke; Swartjes, Maarten; Hoitsma, Elske; Drent, Marjolein; Dunne, Ann; Grutters, Jan C; Vogels, Oscar; Brines, Michael; Cerami, Anthony; Dahan, Albert

2012-01-01

ARA 290 (a peptide designed to activate the innate repair receptor that arrests injury and initiates cytoprotection, antiinflammation and healing) reduces allodynia in preclinical neuropathy models. We studied the safety and efficacy of ARA 290 to reduce symptoms of small fiber neuropathy (SFN) in patients with sarcoidosis. A total of 22 patients diagnosed with sarcoidosis and symptoms of SFN were enrolled in a double-blind, placebo-controlled exploratory trial consisting of three times weekly intravenous dosing of ARA 290 (2 mg; n = 12) or placebo (n = 10) for 4 wks. Inclusion criteria were a diagnosis of neuropathy and a spontaneous pain score of ≥5 (Brief Pain Inventory [BPI]). Endpoints assessed were changes in pain intensity and the small fiber neuropathy screening list (SFNSL) score, quality of life (SF-36), depressive symptoms (Inventory of Depressive Symptomatology [IDS]) and fatigue (Fatigue Assessment Scale [FAS]). No safety concerns were raised by clinical or laboratory assessments. The ARA 290 group showed significant (p < 0.05) improvement at wk 4 in SFNSL score compared with placebo (Δ −11.5 ± 3.04 versus Δ −2.9 ± 3.34 [standard error of the mean]). Additionally, the ARA 290 group showed a significant change from baseline in the pain and physical functioning dimensions of the SF-36 (Δ −23.4 ± 5.5 and Δ −14.6 ± 3.9, respectively). The mean BPI and FAS scores improved significantly but equivalently in both patient groups. No change was observed in the IDS. ARA 290 appears to be safe in patients with sarcoidosis and can reduce neuropathic symptoms. PMID:23168581

78 FR 41369 - Certain Small Diameter Carbon and Alloy Seamless Standard, Line and Pressure Pipe From Romania...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-10

... Carbon and Alloy Seamless Standard, Line and Pressure Pipe From Romania: Preliminary Results of..., line and pressure pipe (small diameter seamless pipe) from Romania. The period of review (POR) is... and Alloy Seamless Standard, Line and Pressure Pipe from Romania,'' dated concurrently with this...

Small-Group Standardized Patient Encounter Improves Athletic Training Students' Psychosocial Intervention and Referral Skills

ERIC Educational Resources Information Center

Walker, Stacy E.; Weidner, Thomas G.; Thrasher, Ashley B.

2016-01-01

Context: Athletic trainers provide psychological support, counseling, intervention, and referral to patients during clinical practice. However, students are rarely exposed to real-life opportunities to develop these skills. Objective: To determine if a small-group standardized patient (SP) encounter improved athletic training students'…

Analysis of radiation safety for Small Modular Reactor (SMR) on PWR-100 MWe type

NASA Astrophysics Data System (ADS)

Udiyani, P. M.; Husnayani, I.; Deswandri; Sunaryo, G. R.

2018-02-01

Indonesia as an archipelago country, including big, medium and small islands is suitable to construction of Small Medium/Modular reactors. Preliminary technology assessment on various SMR has been started, indeed the SMR is grouped into Light Water Reactor, Gas Cooled Reactor, and Solid Cooled Reactor and from its site it is group into Land Based reactor and Water Based Reactor. Fukushima accident made people doubt about the safety of Nuclear Power Plant (NPP), which impact on the public perception of the safety of nuclear power plants. The paper will describe the assessment of safety and radiation consequences on site for normal operation and Design Basis Accident postulation of SMR based on PWR-100 MWe in Bangka Island. Consequences of radiation for normal operation simulated for 3 units SMR. The source term was generated from an inventory by using ORIGEN-2 software and the consequence of routine calculated by PC-Cream and accident by PC Cosyma. The adopted methodology used was based on site-specific meteorological and spatial data. According to calculation by PC-CREAM 08 computer code, the highest individual dose in site area for adults is 5.34E-02 mSv/y in ESE direction within 1 km distance from stack. The result of calculation is that doses on public for normal operation below 1mSv/y. The calculation result from PC Cosyma, the highest individual dose is 1.92.E+00 mSv in ESE direction within 1km distance from stack. The total collective dose (all pathway) is 3.39E-01 manSv, with dominant supporting from cloud pathway. Results show that there are no evacuation countermeasure will be taken based on the regulation of emergency.

29 CFR 1910.5 - Applicability of standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS General § 1910.5 Applicability of standards. (a) Except as provided in... enforce standards or regulations affecting occupational safety or health. (c)(1) If a particular standard...

29 CFR 1910.5 - Applicability of standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS General § 1910.5 Applicability of standards. (a) Except as provided in... enforce standards or regulations affecting occupational safety or health. (c)(1) If a particular standard...

Criticality Safety Evaluation for Small Sample Preparation and Non-Destructive Assay (NDA) Operations in Wing 7 Basement of the CMR Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kunkle, Paige Elizabeth; Zhang, Ning

Nuclear Criticality Safety (NCS) has reviewed the fissionable material small sample preparation and NDA operations in Wing 7 Basement of the CMR Facility. This is a Level-1 evaluation conducted in accordance with NCS-AP-004 [Reference 1], formerly NCS-GUIDE-01, and the guidance set forth on use of the Standard Criticality Safety Requirements (SCSRs) [Reference 2]. As stated in Reference 2, the criticality safety evaluation consists of both the SCSR CSED and the SCSR Application CSED. The SCSR CSED is a Level-3 CSED [Reference 3]. This Level-1 CSED is the SCSR Application CSED. This SCSR Application (Level-1) evaluation does not derive controls, itmore » simply applies controls derived from the SCSR CSED (Level-3) for the application of operations conducted here. The controls derived in the SCSR CSED (Level-3) were evaluated via the process described in Section 6.6.5 of SD-130 (also reproduced in Section 4.3.5 of NCS-AP-004 [Reference 1]) and were determined to not meet the requirements for consideration of elevation into the safety basis documentation for CMR. According to the guidance set forth on use of the SCSRs [Reference 2], the SCSR CSED (Level-3) is also applicable to the CMR Facility because the process and the normal and credible abnormal conditions in question are bounded by those that are described in the SCSR CSED. The controls derived in the SCSR CSED include allowances for solid materials and solution operations. Based on the operations conducted at this location, there are less-than-accountable (LTA) amounts of 233U. Based on the evaluation documented herein, the normal and credible abnormal conditions that might arise during the execution of this process will remain subcritical with the following recommended controls.« less

Test plan and report for Space Shuttle launch environment testing of Bergen cable technology safety cable

NASA Technical Reports Server (NTRS)

Ralph, John

1992-01-01

Bergen Cable Technology (BCT) has introduced a new product they refer to as 'safety cable'. This product is intended as a replacement for lockwire when installed per Aerospace Standard (AS) 4536 (included in Appendix D of this document). Installation of safety cable is reportedly faster and more uniform than lockwire. NASA/GSFC proposes to use this safety cable in Shuttle Small Payloads Project (SSPP) applications on upcoming Shuttle missions. To assure that BCT safety cable will provide positive locking of fasteners equivalent to lockwire, the SSPP will conduct vibration and pull tests of the safety cable.

77 FR 67336 - Certain Small Diameter Carbon and Alloy Seamless Standard, Line and Pressure Pipe From Romania...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-09

... products subject to the order are small diameter seamless carbon and alloy (other than stainless) steel... Carbon and Alloy Seamless Standard, Line and Pressure Pipe From Romania: Final Results of Antidumping... alloy seamless standard, line and pressure pipe from Romania. The period of review is August 1, 2010...

Evaluation of a standardized all-terrain vehicle safety education intervention for youth in rural Central Illinois.

PubMed

Novak, Joshua A; Hafner, John W; Aldag, Jean C; Getz, Marjorie A

2013-01-01

Although research investigating all-terrain vehicle (ATV) riders and ATV injury patterns has led to support for legislative and educational efforts to decrease injuries in users younger than 16 years, there is little published data regarding the utility of ATV safety education programs. This study investigates the effectiveness of a standardized adolescent ATV safety program in changing the safety knowledge and safe ATV riding practices reported by rural Central Illinois youths. A convenience sample of 260 rural Central Illinois middle and high school students received an ATV safety presentation with both didactic and interactive features during the 2009-2010 school year. Preintervention and postintervention surveys were distributed and collected by teachers. Survey questions consisted of multiple-choice questions pertaining to demographics, ATV safety knowledge, and ATV riding practices. More than 200 surveys were collected prior to the intervention and 165 surveys were collected 12 to 24 weeks after the intervention. Percentages are reported, with differences in nominal variables tested by χ(2) test and interval variables by t test. Following the intervention, there was a significant increase in the correct response rate for ATV safety knowledge questions (45.2% vs 56.2%, P < .001). For adolescents who reported riding ATVs, both safety gear use (11.8% to 21.2%, P = .05) and helmet use (25.4% to 29.0%, P = .56) increased; changes were not significant. Adolescent ATV riders reporting 2 or more accidents showed a slight nonsignificant decrease (25.2% vs 23.4%, P = .77) between the time of the pretest and posttest. This safety program was effective at increasing ATV safety knowledge but demonstrates limited effect on safe riding practices.