Organizing safety: conditions for successful information assurance programs.

PubMed

Collmann, Jeff; Coleman, Johnathan; Sostrom, Kristen; Wright, Willie

2004-01-01

Organizations must continuously seek safety. When considering computerized health information systems, "safety" includes protecting the integrity, confidentiality, and availability of information assets such as patient information, key components of the technical information system, and critical personnel. "High Reliability Theory" (HRT) argues that organizations with strong leadership support, continuous training, redundant safety mechanisms, and "cultures of high reliability" can deploy and safely manage complex, risky technologies such as nuclear weapons systems or computerized health information systems. In preparation for the Health Insurance Portability and Accountability Act (HIPAA) of 1996, the Office of the Assistant Secretary of Defense (Health Affairs), the Offices of the Surgeons General of the United States Army, Navy and Air Force, and the Telemedicine and Advanced Technology Research Center (TATRC), US Army Medical Research and Materiel Command sponsored organizational, doctrinal, and technical projects that individually and collectively promote conditions for a "culture of information assurance." These efforts include sponsoring the "P3 Working Group" (P3WG), an interdisciplinary, tri-service taskforce that reviewed all relevant Department of Defense (DoD), Miliary Health System (MHS), Army, Navy and Air Force policies for compliance with the HIPAA medical privacy and data security regulations; supporting development, training, and deployment of OCTAVE(sm), a self-directed information security risk assessment process; and sponsoring development of the Risk Information Management Resource (RIMR), a Web-enabled enterprise portal about health information assurance.

Ultrasound-guided lumbar puncture in pediatric patients: technical success and safety.

PubMed

Pierce, David B; Shivaram, Giri; Koo, Kevin S H; Shaw, Dennis W W; Meyer, Kirby F; Monroe, Eric J

2018-06-01

Disadvantages of fluoroscopically guided lumbar puncture include delivery of ionizing radiation and limited resolution of incompletely ossified posterior elements. Ultrasound (US) allows visualization of critical soft tissues and the cerebrospinal fluid (CSF) space without ionizing radiation. To determine the technical success and safety of US-guided lumbar puncture in pediatric patients. A retrospective review identified all patients referred to interventional radiology for lumbar puncture between June 2010 and June 2017. Patients who underwent lumbar puncture with fluoroscopic guidance alone were excluded. For the remaining procedures, technical success and procedural complications were assessed. Two hundred and one image-guided lumbar punctures in 161 patients were included. Eighty patients (43%) had previously failed landmark-based attempts. One hundred ninety-six (97.5%) patients underwent lumbar puncture. Five procedures (2.5%) were not attempted after US assessment, either due to a paucity of CSF or unsafe window for needle placement. Technical success was achieved in 187 (95.4%) of lumbar punctures attempted with US guidance. One hundred seventy-seven (90.3%) were technically successful with US alone (age range: 2 days-15 years, weight range: 1.9-53.1 kg) and an additional 10 (5.1%) were successful with US-guided thecal access and subsequent fluoroscopic confirmation. Three (1.5%) cases were unsuccessful with US guidance but were subsequently successful with fluoroscopic guidance. Of the 80 previously failed landmark-based lumbar punctures, 77 (96.3%) were successful with US guidance alone. There were no reported complications. US guidance is safe and effective for lumbar punctures and has specific advantages over fluoroscopy in pediatric patients.

Variation and adaptation: learning from success in patient safety-oriented simulation training.

PubMed

Dieckmann, Peter; Patterson, Mary; Lahlou, Saadi; Mesman, Jessica; Nyström, Patrik; Krage, Ralf

2017-01-01

Simulation is traditionally used to reduce errors and their negative consequences. But according to modern safety theories, this focus overlooks the learning potential of the positive performance, which is much more common than errors. Therefore, a supplementary approach to simulation is needed to unfold its full potential. In our commentary, we describe the learning from success (LFS) approach to simulation and debriefing. Drawing on several theoretical frameworks, we suggest supplementing the widespread deficit-oriented, corrective approach to simulation with an approach that focusses on systematically understanding how good performance is produced in frequent (mundane) simulation scenarios. We advocate to investigate and optimize human activity based on the connected layers of any setting: the embodied competences of the healthcare professionals, the social and organizational rules that guide their actions, and the material aspects of the setting. We discuss implications of these theoretical perspectives for the design and conduct of simulation scenarios, post-simulation debriefings, and faculty development programs.

A framework for the development of patient safety education and training guidelines.

PubMed

Zikos, Dimitrios; Diomidous, Marianna; Mantas, John

2010-01-01

Patient Safety (PS) is a major concern that involves a wide range of roles in healthcare, including those who are directly and indirectly involved, and patients as well. In order to succeed into developing a safety culture among healthcare providers, carers and patients, there should be given great attention into building appropriate education and training tools, especially addressing those who plan patient safety activities. The framework described in this policy paper is based on the results of the European Network for Patient Safety (EUNetPaS) project and analyses the principles and elements of the guidance that should be provided to those who design and implement Patient Safety Education and training activities. The main principles that it should be based on and the core teaching objectives-expected outcomes are addressed. Once the main context and considerations are properly set, the guidance should define the general schema of the content that should be included in the Education and Training activities, as well as how these activities would be delivered. It is also important that the different roles of the recipients are clearly distinguished and linked to their role-specific methods, proper delivery platforms and success stories. Setting these principles into practice when planning and implementing interventions, primarily aims to enlighten and support those who are enrolled to design and implement Patient Safety education and training teaching activities. This is achieved by providing them with a framework to build upon, succeeding to build a collaborative, safety conscious and competent environment, in terms of PS. A guidelines web platform has been developed to support this process.

Monitoring road safety development at regional level: A case study in the ASEAN region.

PubMed

Chen, Faan; Wang, Jianjun; Wu, Jiaorong; Chen, Xiaohong; Zegras, P Christopher

2017-09-01

Persistent monitoring of progress, evaluating the results of interventions and recalibrating to achieve continuous improvement over time is widely recognized as being crucial towards the successful development of road safety. In the ASEAN (Association of Southeast Asian Nations) region there is a lack of well-resourced teams that contain multidisciplinary safety professionals, and specialists in individual countries, who are able to carry out this work effectively. In this context, not only must the monitoring framework be effective, it must also be easy to use and adapt. This paper provides a case study that can be easily reproduced; based on an updated and refined Road Safety Development Index (RSDI), by means of the RSR (Rank-sum ratio)-based model, for monitoring/reporting road safety development at regional level. The case study was focused on the road safety achievements in eleven Southeast Asian countries; identifying the areas of poor performance, potential problems and delays. These countries are finally grouped into several classes based on an overview of their progress and achievements regarding to road safety. The results allow the policymakers to better understand their own road safety progress toward their desired impact; more importantly, these results enable necessary interventions to be made in a quick and timely manner. Keeping action plans on schedule if things are not progressing as desired. This would avoid 'reinventing the wheel' and trial and error approaches to road safety, making the implementation of action plans more effective. Copyright © 2017 Elsevier Ltd. All rights reserved.

Explore The NASA Safety Center

NASA Image and Video Library

2015-07-01

The NASA Safety Center (NSC) reports to NASA’s Office of Safety and Mission Assurance and supports the Safety and Mission Assurance (SMA) requirements of NASA’s portfolio of programs and projects. The NSC focuses on development of the personnel, processes and tools needed for the safe and successful achievement of NASA’s strategic goals.

When Failure Means Success: Accepting Risk in Aerospace Development

NASA Technical Reports Server (NTRS)

Dumbacher, Daniel L.; Singer, Christopher E.

2009-01-01

Over the last three decades, NASA has been diligent in qualifying systems for human space flight. As the Agency transitions from operating the Space Shuttle, its employees must learn to accept higher risk levels to generate the data needed to certify its next human space flight system. The Marshall Center s Engineering workforce is developing the Ares I crew launch vehicle and designing the Ares V cargo launch vehicle for safety, reliability, and cost-effective operations. This presentation will provide a risk retrospective, using first-hand examples from the Delta Clipper-Experimental Advanced (DC-XA) and the X-33 single-stage-to-orbit flight demonstrators, while looking ahead to the upcoming Ares I-X uncrewed test flight. The DC-XA was successfully flown twice in 26 hours, setting a new turnaround-time record. Later, one of its 3 landing gears did not deploy, it tipped over, and was destroyed. During structural testing, the X-33 s advanced composite tanks were unable to withstand the forces to which it was subjected and the project was later cancelled. These are examples of successful failures, as the data generated are captured in databases used by vehicle designers today. More recently, the Ares I-X flight readiness review process was streamlined in keeping with the mission's objectives, since human lives are not at stake, which reflects the beginning of a cultural change. Failures are acceptable during testing, as they provide the lessons that actually lead to mission success. These and other examples will stimulate the discussion of when to accept risk in aerospace projects.

Successful Globalisation, Education and Sustainable Development

ERIC Educational Resources Information Center

Little, Angela W.; Green, Andy

2009-01-01

This article examines the role of education in "successful globalisation" and how this links with agendas for sustainable development. In the first part "successful globalisation" is defined as economic growth combined with equality and social peace. Japan and the East Asian tiger economies--particularly South Korea and…

Technical Excellence and Communication: The Cornerstones for Successful Safety and Mission Assurance Programs

NASA Technical Reports Server (NTRS)

Malone, Roy W.; Livingston, John M.

2010-01-01

The paper describes the role of technical excellence and communication in the development and maintenance of safety and mission assurance programs. The Marshall Space Flight Center (MSFC) Safety and Mission Assurance (S&MA) organization is used to illustrate philosophies and techniques that strengthen safety and mission assurance efforts and that contribute to healthy and effective organizational cultures. The events and conditions leading to the development of the MSFC S&MA organization are reviewed. Historic issues and concerns are identified. The adverse effects of resource limitations and risk assessment roles are discussed. The structure and functions of the core safety, reliability, and quality assurance functions are presented. The current organization s mission and vision commitments serve as the starting points for the description of the current organization. The goals and objectives are presented that address the criticisms of the predecessor organizations. Additional improvements are presented that address the development of technical excellence and the steps taken to improve communication within the Center, with program customers, and with other Agency S&MA organizations.

Technical Excellence and Communication, the Cornerstones for Successful Safety and Mission Assurance Programs

NASA Astrophysics Data System (ADS)

Malone, Roy W.; Livingston, John M.

2010-09-01

The paper describes the role of technical excellence and communication in the development and maintenance of safety and mission assurance programs. The Marshall Space Flight Center(MSFC) Safety and Mission Assurance(S&MA) organization is used to illustrate philosophies and techniques that strengthen safety and mission assurance efforts and that contribute to healthy and effective organizational cultures. The events and conditions leading to the development of the MSFC S&MA organization are reviewed. Historic issues and concerns are identified. The adverse effects of resource limitations and risk assessment roles are discussed. The structure and functions of the core safety, reliability, and quality assurance functions are presented. The current organization’s mission and vision commitments serve as the starting points for the description of the current organization. The goals and objectives are presented that address the criticisms of the predecessor organizations. Additional improvements are presented that address the development of technical excellence and the steps taken to improve communication within the Center, with program customers, and with other Agency S&MA organizations.

Success rates for product development strategies in new drug development.

PubMed

Dahlin, E; Nelson, G M; Haynes, M; Sargeant, F

2016-04-01

While research has examined the likelihood that drugs progress across phases of clinical trials, no research to date has examined the types of product development strategies that are the most likely to be successful in clinical trials. This research seeks to identify the strategies that are most likely to reach the market-those generated using a novel product development strategy or strategies that combine a company's expertise with both drugs and indications, which we call combined experience strategies. We evaluate the success of product development strategies in the drug development process for a sample of 2562 clinical trials completed by 406 US pharmaceutical companies. To identify product development strategies, we coded each clinical trial according to whether it consisted of an indication or a drug that was new to the firm. Accordingly, a clinical trial that consists of both an indication and a drug that were both new to the firm represents a novel product development strategy; indication experience is a product development strategy that consists of an indication that a firm had tested previously in a clinical trial, but with a drug that was new to the firm; drug experience is a product development strategy that consists of a drug that the firm had prior experience testing in clinical trials, but with an indication that was new to the firm; combined experience consists of both a drug and an indication that the firm had experience testing in clinical trials. Success rates for product development strategies across clinical phases were calculated for the clinical trials in our sample. Combined experience strategies had the highest success rate. More than three and a half percent (0·036) of the trials that combined experience with drugs and indications eventually reached the market. The next most successful strategy is drug experience (0·025) with novel strategies trailing closely (0·024). Indication experience strategies are the least successful (0·008

Collaborating with nurse leaders to develop patient safety practices.

PubMed

Kanerva, Anne; Kivinen, Tuula; Lammintakanen, Johanna

2017-07-03

Purpose The organisational level and leadership development are crucial elements in advancing patient safety, because patient safety weaknesses are often caused by system failures. However, little is known about how frontline leader and director teams can be supported to develop patient safety practices. The purpose of this study is to describe the patient safety development process carried out by nursing leaders and directors. The research questions were: how the chosen development areas progressed in six months' time and how nursing leaders view the participatory development process. Design/methodology/approach Participatory action research was used to engage frontline nursing leaders and directors into developing patient safety practices. Semi-structured group interviews ( N = 10) were used in data collection at the end of a six-month action cycle, and data were analysed using content analysis. Findings The participatory development process enhanced collaboration and gave leaders insights into patient safety as a part of the hospital system and their role in advancing it. The chosen development areas advanced to different extents, with the greatest improvements in those areas with simple guidelines to follow and in which the leaders were most participative. The features of high-reliability organisation were moderately identified in the nursing leaders' actions and views. For example, acting as a change agent to implement patient safety practices was challenging. Participatory methods can be used to support leaders into advancing patient safety. However, it is important that the participants are familiar with the method, and there are enough facilitators to steer development processes. Originality/value Research brings more knowledge of how leaders can increase their effectiveness in advancing patient safety and promoting high-reliability organisation features in the healthcare organisation.

Hospital readiness for health information exchange: development of metrics associated with successful collaboration for quality improvement.

PubMed

Korst, Lisa M; Aydin, Carolyn E; Signer, Jordana M K; Fink, Arlene

2011-08-01

The development of readiness metrics for organizational participation in health information exchange is critical for monitoring progress toward, and achievement of, successful inter-organizational collaboration. In preparation for the development of a tool to measure readiness for data-sharing, we tested whether organizational capacities known to be related to readiness were associated with successful participation in an American data-sharing collaborative for quality improvement. Cross-sectional design, using an on-line survey of hospitals in a large, mature data-sharing collaborative organized for benchmarking and improvement in nursing care quality. Factor analysis was used to identify salient constructs, and identified factors were analyzed with respect to "successful" participation. "Success" was defined as the incorporation of comparative performance data into the hospital dashboard. The most important factor in predicting success included survey items measuring the strength of organizational leadership in fostering a culture of quality improvement (QI Leadership): (1) presence of a supportive hospital executive; (2) the extent to which a hospital values data; (3) the presence of leaders' vision for how the collaborative advances the hospital's strategic goals; (4) hospital use of the collaborative data to track quality outcomes; and (5) staff recognition of a strong mandate for collaborative participation (α=0.84, correlation with Success 0.68 [P<0.0001]). The data emphasize the importance of hospital QI Leadership in collaboratives that aim to share data for QI or safety purposes. Such metrics should prove useful in the planning and development of this complex form of inter-organizational collaboration. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Safety Case Development as an Information Modelling Problem

NASA Astrophysics Data System (ADS)

Lewis, Robert

This paper considers the benefits from applying information modelling as the basis for creating an electronically-based safety case. It highlights the current difficulties of developing and managing large document-based safety cases for complex systems such as those found in Air Traffic Control systems. After a review of current tools and related literature on this subject, the paper proceeds to examine the many relationships between entities that can exist within a large safety case. The paper considers the benefits to both safety case writers and readers from the future development of an ideal safety case tool that is able to exploit these information models. The paper also introduces the idea that the safety case has formal relationships between entities that directly support the safety case argument using a methodology such as GSN, and informal relationships that provide links to direct and backing evidence and to supporting information.

Complying with the Occupational Safety and Health Administration's Bloodborne Pathogens Standard: implementing needleless systems and intravenous safety devices.

PubMed

Marini, Michelle A; Giangregorio, Maeve; Kraskinski, Joanna C

2004-03-01

Preventing the transmission of bloodborne pathogens to healthcare workers has been a mission and a challenge of the healthcare industry for over 20 years. The development of the Occupational Safety and Health Administration Bloodborne Pathogens Standard in 1991 and the passing of the Needlestick Safety Act in 2000 mandated hospitals to develop an Exposure Control Plan to protect workers from these pathogens. Children's Hospital Boston began implementation of a needleless system in 1993. Employees readily accepted these systems into practice, because they were convenient and easy to use. A marked decrease in exposures to bloodborne pathogens naturally followed, which is consistent with the national data. The transition to intravenous (i.v.) safety devices at Children's Hospital began in 2000 and proved to be more of a challenge. First, the clinicians must choose a safety product, which requires developing and implementing a trial plan with potential catheters. This selection process is especially difficult in pediatrics where successful placement of the smallest-gauge catheter, no. 24, is imperative. After choosing an i.v. safety product, successful transition is dependent upon the thoroughness of i.v. safety device training and a commitment by the clinicians to the use of these products. Although the number of needlestick injuries and subsequent transmission of bloodborne pathogens have been further reduced with the use of i.v. safety devices, needlestick injuries still occur. This results from a lack of familiarity with the engineering of the device and therefore poor technique or a failure to activate the safety mechanism. Staff resistance due to loss of expertise with the new device and patient care concerns are additional barriers to the use of these new products. Addressing these obstacles and providing adequate training for all clinicians were required for successful implementation of these i.v. safety devices.

Guiding principles of safety as a basis for developing a pharmaceutical safety culture.

PubMed

Edwards, Brian; Olsen, Axel K; Whalen, Matthew D; Gold, Marla J

2007-05-01

Despite the best efforts of industry and regulatory authorities, the trust of society in the process of medicine development and communication of pharmaceutical risk has ebbed away. In response the US government has called for a culture of compliance while the EU regulators talk of a 'culture of scientific excellence'. However, one of the fundamental problems hindering progress to rebuilding trust based on a pharmaceutical safety culture is the lack of agreement and transparency between all stakeholders as to what is meant by a 'Safety of Medicines'. For that reason, we propose 'Guiding Principles of Safety for Pharmaceuticals' are developed analogous to the way that Chemical Safety has been tackled. A logical starting point would be to examine the Principles outlined by the US Institute of Medicine although we acknowledge that these Principles require further extensive debate and definition. Nevertheless, the Principles should take centre stage in the reform of pharmaceutical development required to restore society's trust.

Improving operating room safety

PubMed Central

2009-01-01

Despite the introduction of the Universal Protocol, patient safety in surgery remains a daily challenge in the operating room. This present study describes one community health system's efforts to improve operating room safety through human factors training and ultimately the development of a surgical checklist. Using a combination of formal training, local studies documenting operating room safety issues and peer to peer mentoring we were able to substantially change the culture of our operating room. Our efforts have prepared us for successfully implementing a standardized checklist to improve operating room safety throughout our entire system. Based on these findings we recommend a multimodal approach to improving operating room safety. PMID:19930577

Challenges and strategies to facilitate formulation development of pediatric drug products: Safety qualification of excipients.

PubMed

Buckley, Lorrene A; Salunke, Smita; Thompson, Karen; Baer, Gerri; Fegley, Darren; Turner, Mark A

2018-02-05

A public workshop entitled "Challenges and strategies to facilitate formulation development of pediatric drug products" focused on current status and gaps as well as recommendations for risk-based strategies to support the development of pediatric age-appropriate drug products. Representatives from industry, academia, and regulatory agencies discussed the issues within plenary, panel, and case-study breakout sessions. By enabling practical and meaningful discussion between scientists representing the diversity of involved disciplines (formulators, nonclinical scientists, clinicians, and regulators) and geographies (eg, US, EU), the Excipients Safety workshop session was successful in providing specific and key recommendations for defining paths forward. Leveraging orthogonal sources of data (eg. food industry, agro science), collaborative data sharing, and increased awareness of the existing sources such as the Safety and Toxicity of Excipients for Paediatrics (STEP) database will be important to address the gap in excipients knowledge needed for risk assessment. The importance of defining risk-based approaches to safety assessments for excipients vital to pediatric formulations was emphasized, as was the need for meaningful stakeholder (eg, patient, caregiver) engagement. Copyright © 2017 Elsevier B.V. All rights reserved.

Annotated Bibliography of Rail Transit Safety, 1975-1980, with Emphasis on Safety Research and Development.

DOT National Transportation Integrated Search

1981-09-01

The bibliography provides a comprehensive review of published literature concerning rail transit safety and includes 186 annotated entries. The report covers domestic and foreign material on rail transit safety and related safety research and develop...

Executive Development: Key Factors for Success.

ERIC Educational Resources Information Center

Fenwick-Magrath, Julie A.

1988-01-01

Reports results from a survey of 12 leading corporations concerning their management of the executive development process. Indicates that involvement of the chief executive officer, a clear policy, a relationship between executive development and business strategies and objectives, annual succession planning, and management responsibility are key…

Sixty Successful Dyslexics: Gender Differences and Literacy Development.

ERIC Educational Resources Information Center

Fink, Rosalie P.

A study examined how, when, and under what conditions severe dyslexics developed high literacy skills, as well as the role of gender differences in literacy development and professional success. Subjects were 60 highly successful dyslexic adults (30 men and 30 women) and 10 nondyslexic male and female normative controls. Results indicated that…

Occupational health and safety in the least developed countries--a simple case of neglect.

PubMed

Ahasan, M R; Partanen, T

2001-03-01

In many of the least developed countries, working people are significantly exposed to a number of occupational problems that may result in a deterioration of their health, safety and well being. These work-related problems are untenable, not only because of the occupational problems itself but also because of the simultaneous exposure to heat, dusts, noise, organo-chemicals, and biological and environmental pollution. This situation has existed for a long time due to various socio economic,geographical, cultural and local factors. The deteriorating situation of health and safety in the workplace may perhaps exist due to the inadequate resource facilities, economic constraints and lack of opportunity to conduct research and studies on the assessment of exposure-diseases associations. Officials, who are employed by the state, are not able to implement work regulations and labour legislation easily. Generally, they are not professionally trained and expert in the occupational health, industrial hygiene and/or safety fields, and thus, successful application and implementation of control measures are lacking. Steps to control work exposure limits have been ineffective, since national policies have been rare, owing to the multiple obstacles in preventing occupational problems. However, the major focus is on practical solutions to differing workers' needs, consideration of which is very important, depending on the what the industrial entrepreneurs could reasonably to be expected to afford. Why there is a lack of motivation and effort regarding the development of health and safety-this paper explores some important issues, aiming to focus public attention on the legacy of national and international efforts. Examples are likewise given to show the real situation of health and safety in the least developed countries.

Developing Expert Teams with a Strong Safety Culture

NASA Technical Reports Server (NTRS)

Rogers, David G.

2010-01-01

Would you like to lead a world renowned team that draws out all the talents and expertise of its members and consistently out performs all others in the industry? Ever wonder why so many organizations fail to truly learn from past mistakes only to repeat the same ones at a later date? Are you a program/project manager or team member in a high-risk organization where the decisions made often carry the highest of consequences? Leadership, communication, team building, critical decision-making and continuous team improvement skills and behaviors are mere talking points without the attitudes, commitment and strategies necessary to make them the very fabric of a team. Developing Expert Teams with a Strong Safety Culture, will provide you with proven knowledge and strategies to take your team soaring to heights you may have not thought possible. A myriad of teams have applied these strategies and techniques within their organization team environments: military and commercial aviation, astronaut flight crews, Shuttle flight controllers, members of the Space Shuttle Program Mission Management Team, air traffic controllers, nuclear power control teams, surgical teams, and the fire service report having spectacular success. Many industry leaders are beginning to realize that although the circumstances and environments of these teams may differ greatly to their own, the core elements, governing principles and dynamics involved in managing and building a stellar safety conscious team remain identical.

Development of a Comprehensive Database System for Safety Analyst

PubMed Central

Paz, Alexander; Veeramisti, Naveen; Khanal, Indira; Baker, Justin

2015-01-01

This study addressed barriers associated with the use of Safety Analyst, a state-of-the-art tool that has been developed to assist during the entire Traffic Safety Management process but that is not widely used due to a number of challenges as described in this paper. As part of this study, a comprehensive database system and tools to provide data to multiple traffic safety applications, with a focus on Safety Analyst, were developed. A number of data management tools were developed to extract, collect, transform, integrate, and load the data. The system includes consistency-checking capabilities to ensure the adequate insertion and update of data into the database. This system focused on data from roadways, ramps, intersections, and traffic characteristics for Safety Analyst. To test the proposed system and tools, data from Clark County, which is the largest county in Nevada and includes the cities of Las Vegas, Henderson, Boulder City, and North Las Vegas, was used. The database and Safety Analyst together help identify the sites with the potential for safety improvements. Specifically, this study examined the results from two case studies. The first case study, which identified sites having a potential for safety improvements with respect to fatal and all injury crashes, included all roadway elements and used default and calibrated Safety Performance Functions (SPFs). The second case study identified sites having a potential for safety improvements with respect to fatal and all injury crashes, specifically regarding intersections; it used default and calibrated SPFs as well. Conclusions were developed for the calibration of safety performance functions and the classification of site subtypes. Guidelines were provided about the selection of a particular network screening type or performance measure for network screening. PMID:26167531

Initial development of a practical safety audit tool to assess fleet safety management practices.

PubMed

Mitchell, Rebecca; Friswell, Rena; Mooren, Lori

2012-07-01

Work-related vehicle crashes are a common cause of occupational injury. Yet, there are few studies that investigate management practices used for light vehicle fleets (i.e. vehicles less than 4.5 tonnes). One of the impediments to obtaining and sharing information on effective fleet safety management is the lack of an evidence-based, standardised measurement tool. This article describes the initial development of an audit tool to assess fleet safety management practices in light vehicle fleets. The audit tool was developed by triangulating information from a review of the literature on fleet safety management practices and from semi-structured interviews with 15 fleet managers and 21 fleet drivers. A preliminary useability assessment was conducted with 5 organisations. The audit tool assesses the management of fleet safety against five core categories: (1) management, systems and processes; (2) monitoring and assessment; (3) employee recruitment, training and education; (4) vehicle technology, selection and maintenance; and (5) vehicle journeys. Each of these core categories has between 1 and 3 sub-categories. Organisations are rated at one of 4 levels on each sub-category. The fleet safety management audit tool is designed to identify the extent to which fleet safety is managed in an organisation against best practice. It is intended that the audit tool be used to conduct audits within an organisation to provide an indicator of progress in managing fleet safety and to consistently benchmark performance against other organisations. Application of the tool by fleet safety researchers is now needed to inform its further development and refinement and to permit psychometric evaluation. Copyright © 2012 Elsevier Ltd. All rights reserved.

Epidemiological determinants of successful vaccine development.

PubMed

Nishiura, Hiroshi; Mizumoto, Kenji

2013-01-01

Epidemiological determinants of successful vaccine development were explored using measurable biological variables including antigenic stability and requirement of T-cell immunity. Employing a logistic regression model, we demonstrate that a high affinity with blood and immune cells and pathogen interactions (e.g. interference) would be the risk factors of failure for vaccine development.

Global road safety online course development.

DOT National Transportation Integrated Search

2017-06-01

The Global Road Safety Online Curriculum Development project involved the adaptation of in-person classroom materials and development of new materials to be used in an online setting. A short-course format was selected to pilot the course, and four t...

Parallel computation safety analysis irradiation targets fission product molybdenum in neutronic aspect using the successive over-relaxation algorithm

NASA Astrophysics Data System (ADS)

Susmikanti, Mike; Dewayatna, Winter; Sulistyo, Yos

2014-09-01

One of the research activities in support of commercial radioisotope production program is a safety research on target FPM (Fission Product Molybdenum) irradiation. FPM targets form a tube made of stainless steel which contains nuclear-grade high-enrichment uranium. The FPM irradiation tube is intended to obtain fission products. Fission materials such as Mo99 used widely the form of kits in the medical world. The neutronics problem is solved using first-order perturbation theory derived from the diffusion equation for four groups. In contrast, Mo isotopes have longer half-lives, about 3 days (66 hours), so the delivery of radioisotopes to consumer centers and storage is possible though still limited. The production of this isotope potentially gives significant economic value. The criticality and flux in multigroup diffusion model was calculated for various irradiation positions and uranium contents. This model involves complex computation, with large and sparse matrix system. Several parallel algorithms have been developed for the sparse and large matrix solution. In this paper, a successive over-relaxation (SOR) algorithm was implemented for the calculation of reactivity coefficients which can be done in parallel. Previous works performed reactivity calculations serially with Gauss-Seidel iteratives. The parallel method can be used to solve multigroup diffusion equation system and calculate the criticality and reactivity coefficients. In this research a computer code was developed to exploit parallel processing to perform reactivity calculations which were to be used in safety analysis. The parallel processing in the multicore computer system allows the calculation to be performed more quickly. This code was applied for the safety limits calculation of irradiated FPM targets containing highly enriched uranium. The results of calculations neutron show that for uranium contents of 1.7676 g and 6.1866 g (× 106 cm-1) in a tube, their delta reactivities are the still

Hospital readiness for health information exchange: development of metrics associated with successful collaboration for quality improvement

PubMed Central

Korst, Lisa M.; Aydin, Carolyn E.; Signer, Jordana M. K.; Fink, Arlene

2011-01-01

Objective The development of readiness metrics for organizational participation in health information exchange is critical for monitoring progress toward, and achievement of, successful inter-organizational collaboration. In preparation for the development of a tool to measure readiness for data-sharing, we tested whether organizational capacities known to be related to readiness were associated with successful participation in an American data-sharing collaborative for quality improvement. Design Cross-sectional design, using an on-line survey of hospitals in a large, mature data-sharing collaborative organized for benchmarking and improvement in nursing care quality. Measurements Factor analysis was used to identify salient constructs, and identified factors were analyzed with respect to “successful” participation. “Success” was defined as the incorporation of comparative performance data into the hospital dashboard. Results The most important factor in predicting success included survey items measuring the strength of organizational leadership in fostering a culture of quality improvement (QI Leadership): 1) presence of a supportive hospital executive; 2) the extent to which a hospital values data; 3) the presence of leaders’ vision for how the collaborative advances the hospital’s strategic goals; 4) hospital use of the collaborative data to track quality outcomes; and 5) staff recognition of a strong mandate for collaborative participation (α = 0.84, correlation with Success 0.68 [P < 0.0001]). Conclusion The data emphasize the importance of hospital QI Leadership in collaboratives that aim to share data for QI or safety purposes. Such metrics should prove useful in the planning and development of this complex form of inter-organizational collaboration. PMID:21330191

FY 1991 safety program status report

NASA Technical Reports Server (NTRS)

1991-01-01

In FY 1991, the NASA Safety Division continued efforts to enhance the quality and productivity of its safety oversight function. Recent initiatives set forth in areas such as training, risk management, safety assurance, operational safety, and safety information systems have matured into viable programs contributing to the safety and success of activities throughout the Agency. Efforts continued to develop a centralized intra-agency safety training program with establishment of the NASA Safety Training Center at the Johnson Space Center (JSC). The objective is to provide quality training for NASA employees and contractors on a broad range of safety-related topics. Courses developed by the Training Center will be presented at various NASA locations to minimize travel and reach the greatest number of people at the least cost. In FY 1991, as part of the ongoing efforts to enhance the total quality of NASA's safety work force, the Safety Training Center initiated development of a Certified Safety Professional review course. This course provides a comprehensive review of the skills and knowledge that well-rounded safety professionals must possess to qualify for professional certification. FY 1992 will see the course presented to NASA and contractor employees at all installations via the NASA Video Teleconference System.

How is success achieved by individuals innovating for patient safety and quality in the NHS?

PubMed

Sheard, Laura; Jackson, Cath; Lawton, Rebecca

2017-09-11

Innovation in healthcare is said to be notoriously difficult to achieve and sustain yet simultaneously the health service is under intense pressure to innovate given the ever increasing demands placed upon it. Whilst many studies have looked at diffusion of innovation from an organisational perspective, few have sought to understand how individuals working in healthcare innovate successfully. We took a positive deviance approach to understand how innovations are achieved by individuals working in the NHS. We conducted in depth interviews in 2015 with 15 individuals who had received a national award for being a successful UK innovator in healthcare. We invited only those people who were currently (or had recently) worked in the NHS and whose innovation focused on improving patient safety or quality. Thematic analysis was used. Four themes emerged from the data: personal determination, the ability to broker relationships and make connections, the ways in which innovators were able to navigate organisational culture to their advantage and their ability to use evidence to influence others. Determination, focus and persistence were important personal characteristics of innovators as were skills in being able to challenge the status quo. Innovators were able to connect sometimes disparate teams and people, being the broker between them in negotiating collaborative working. The culture of the organisation these participants resided in was important with some being able to use this (and the current patient safety agenda) to their advantage. Gathering robust data to demonstrate their innovation had a positive impact and was seen as essential to its progression. This paper reveals a number of factors which are important to the success of innovators in healthcare. We have uncovered that innovators have particular personal traits which encourage a propensity towards change and action. Yet, for fruitful innovation to take place, it is important for relational networks and

Development of decision support tools to assess pedestrian and bicycle safety : development of safety performance functions : final report.

DOT National Transportation Integrated Search

2016-11-15

While a number of studies have developed Safety Performance Functions (SPFs) for : motorized traffic, there has been a very limited focus on developing SPFs for non-motorized : traffic. Lack of exposure measures for pedestrians and bicyclists has bee...

Safety in numbers: the development of Leapfrog's composite patient safety score for U.S. hospitals.

PubMed

Austin, J Matthew; D'Andrea, Guy; Birkmeyer, John D; Leape, Lucian L; Milstein, Arnold; Pronovost, Peter J; Romano, Patrick S; Singer, Sara J; Vogus, Timothy J; Wachter, Robert M

2014-03-01

To develop a composite patient safety score that provides patients, health-care providers, and health-care purchasers with a standardized method to evaluate patient safety in general acute care hospitals in the United States. The Leapfrog Group sought guidance from a panel of national patient safety experts to develop the composite score. Candidate patient safety performance measures for inclusion in the score were identified from publicly reported national sources. Hospital performance on each measure was converted into a "z-score" and then aggregated using measure-specific weights. A reference mean score was set at 3, with scores interpreted in terms of standard deviations above or below the mean, with above reflecting better than average performance. Twenty-six measures were included in the score. The mean composite score for 2652 general acute care hospitals in the United States was 2.97 (range by hospital, 0.46-3.94). Safety scores were slightly lower for hospitals that were publicly owned, rural in location, or had a larger percentage of patients with Medicaid as their primary insurance. The Leapfrog patient safety composite provides a standardized method to evaluate patient safety in general acute care hospitals in the United States. While constrained by available data and publicly reported scores on patient safety measures, the composite score reflects the best available evidence regarding a hospital's efforts and outcomes in patient safety. Additional analyses are needed, but the score did not seem to have a strong bias against hospitals with specific characteristics. The composite score will continue to be refined over time as measures of patient safety evolve.

Health and safety in clinical laboratories in developing countries: safety considerations.

PubMed

Ejilemele, A A; Ojule, A C

2004-01-01

Clinical laboratories are potentially hazardous work areas. Health and safety in clinical laboratories is becoming an increasingly important subject as a result of the emergence of highly infectious diseases such as hepatitis and HIV. This is even more so in developing countries where health and safety have traditionally been regarded as low priority issues, considering the more important health problems confronting the health authorities in these countries. We conducted a literature search using the medical subheadings titles on the INTERNET over a period of twenty years and summarized our findings. This article identifies hazards in the laboratories and highlights measures to make the laboratory a safer work place. It also emphasizes the mandatory obligations of employers and employees towards the attainment of acceptable safety standards in clinical laboratories in Third World countries in the face of the current HIV/AIDS epidemic in many of these developing countries especially in the sub-Saharan Africa while accommodating the increasing work load in these laboratories. Both the employer and the employee have major roles to play in the maintenance of a safe working environment. This can be achieved if measures discussed are incorporated into everyday laboratory practice.

Developing an industry-oriented safety curriculum using the Delphi technique.

PubMed

Chen, Der-Fa; Wu, Tsung-Chih; Chen, Chi-Hsiang; Chang, Shu-Hsuan; Yao, Kai-Chao; Liao, Chin-Wen

2016-09-01

In this study, we examined the development of industry-oriented safety degree curricula at a college level. Based on a review of literature on the practices and study of the development of safety curricula, we classified occupational safety and health curricula into the following three domains: safety engineering, health engineering, and safety and health management. We invited 44 safety professionals to complete a four-round survey that was designed using a modified Delphi technique. We used Chi-square statistics to test the panel experts' consensus on the significance of the items in the three domains and employed descriptive statistics to rank the participants' rating of each item. The results showed that the top three items for each of the three domains were Risk Assessment, Dangerous Machinery and Equipment, and Fire and Explosion Prevention for safety engineering; Ergonomics, Industrial Toxicology, and Health Risk Assessment for health engineering; and Industrial Safety and Health Regulations, Accident Investigation and Analysis, and Emergency Response for safety and health management. Only graduates from safety programmes who possess practical industry-oriented abilities can satisfy industry demands and provide value to the existence of college safety programmes.

Development of photovoltaic array and module safety requirements

NASA Technical Reports Server (NTRS)

1982-01-01

Safety requirements for photovoltaic module and panel designs and configurations likely to be used in residential, intermediate, and large-scale applications were identified and developed. The National Electrical Code and Building Codes were reviewed with respect to present provisions which may be considered to affect the design of photovoltaic modules. Limited testing, primarily in the roof fire resistance field was conducted. Additional studies and further investigations led to the development of a proposed standard for safety for flat-plate photovoltaic modules and panels. Additional work covered the initial investigation of conceptual approaches and temporary deployment, for concept verification purposes, of a differential dc ground-fault detection circuit suitable as a part of a photovoltaic array safety system.

Curriculum Development and Implementation of a National Interprofessional Fellowship in Patient Safety.

PubMed

Watts, Bradley V; Williams, Linda; Mills, Peter D; Paull, Douglas E; Cully, Jeffrey A; Gilman, Stuart C; Hemphill, Robin R

2018-06-15

Developing a workforce skilled in improving the safety of medical care has often been cited as an important means to achieve safer care. Although some educational programs geared toward patient safety have been developed, few advanced training programs have been described in the literature. We describe the development of a patient safety fellowship program. We describe the development and curriculum of an Interprofessional Fellowship in Patient Safety. The 1-year in residence fellowship focuses on domains such as leadership, spreading innovations, medical improvement, patient safety culture, reliability science, and understanding errors. Specific training in patient safety is available and has been delivered to 48 fellows from a wide range of backgrounds. Fellows have accomplished much in terms of improvement projects, educational innovations, and publications. After completing the fellowship program, fellows are obtaining positions within health-care quality and safety and are likely to make long-term contributions. We offer a curriculum and fellowship design for the topic of patient safety. Available evidence suggests that the fellowship results in the development of patient safety professionals.

The practice of pre-marketing safety assessment in drug development.

PubMed

Chuang-Stein, Christy; Xia, H Amy

2013-01-01

The last 15 years have seen a substantial increase in efforts devoted to safety assessment by statisticians in the pharmaceutical industry. While some of these efforts were driven by regulations and public demand for safer products, much of the motivation came from the realization that there is a strong need for a systematic approach to safety planning, evaluation, and reporting at the program level throughout the drug development life cycle. An efficient process can help us identify safety signals early and afford us the opportunity to develop effective risk minimization plan early in the development cycle. This awareness has led many pharmaceutical sponsors to set up internal systems and structures to effectively conduct safety assessment at all levels (patient, study, and program). In addition to process, tools have emerged that are designed to enhance data review and pattern recognition. In this paper, we describe advancements in the practice of safety assessment during the premarketing phase of drug development. In particular, we share examples of safety assessment practice at our respective companies, some of which are based on recommendations from industry-initiated working groups on best practice in recent years.

Patient Safety Movement: History and Future Directions.

PubMed

Lark, Meghan E; Kirkpatrick, Kay; Chung, Kevin C

2018-02-01

Despite progress within the past 15 years, improving patient safety in health care remains an important public health issue. The history of safety policies, research, and development has revealed that this issue is more complex than initially perceived and is pertinent to all health care settings. Solutions, therefore, must be approached at the systems level and supplemented with a change in safety culture, especially in higher risk fields such as surgery. To do so, health care agents at all levels have started to prioritize the improvement of nontechnical skills such as teamwork, communication, and accountability, as reflected by the development of various checklists and safety campaigns. This progress may be sustained by adopting teamwork training programs that have proven successful in other high-risk industries, such as crew resource management in aviation. These techniques can be readily implemented among surgical teams; however, successful application depends heavily on the strong leadership and vigilance of individual surgeons. Copyright © 2018 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

Transportation safety data and analysis : Volume 2, Calibration of the highway safety manual and development of new safety performance functions.

DOT National Transportation Integrated Search

2011-03-01

This report documents the calibration of the Highway Safety Manual (HSM) safety performance function (SPF) : for rural two-lane two-way roadway segments in Utah and the development of new models using negative : binomial and hierarchical Bayesian mod...

Software safety - A user's practical perspective

NASA Technical Reports Server (NTRS)

Dunn, William R.; Corliss, Lloyd D.

1990-01-01

Software safety assurance philosophy and practices at the NASA Ames are discussed. It is shown that, to be safe, software must be error-free. Software developments on two digital flight control systems and two ground facility systems are examined, including the overall system and software organization and function, the software-safety issues, and their resolution. The effectiveness of safety assurance methods is discussed, including conventional life-cycle practices, verification and validation testing, software safety analysis, and formal design methods. It is concluded (1) that a practical software safety technology does not yet exist, (2) that it is unlikely that a set of general-purpose analytical techniques can be developed for proving that software is safe, and (3) that successful software safety-assurance practices will have to take into account the detailed design processes employed and show that the software will execute correctly under all possible conditions.

Development of a safety management protocol.

DOT National Transportation Integrated Search

2008-09-01

The UC Berkeley Traffic Safety Center (TSC) has produced this report under a contract from the California Department of Transportation : (Caltrans). The aim is to address workplace injuries and accidents among Caltrans employees and develop recommend...

The Center for Successful Child Development.

ERIC Educational Resources Information Center

Center for Successful Child Development, Chicago, IL.

Described are characteristics of the Center for Successful Child Development (CSCD), a family-oriented early childhood intervention program serving 6 of 28 buildings of the Robert Taylor Homes (a public housing project inhabited by 20,000 people on Chicago's south side). After an introductory section providing background information, discussion…

Microbiological food safety: a dilemma of developing societies.

PubMed

Akhtar, Saeed; Sarker, Mahfuzur R; Hossain, Ashfaque

2014-11-01

Current food safety issues are deleteriously reshaping the life style of the population in the developing world. Socioeconomic status of the population in poorer economies is one of the major determinants to delineate the availability of safe food to the vulnerable population. Assessment of the prevalence of foodborne illness in developing world is the most neglected area to control disease. Botulism, Shigellosis, Campylobacteriosis, Escherichia coli infection, Staphylococcus aureus infection, Salmonellosis, Listeriosis and Cholerae are extensively prevalent and pose a major threat to human health in underdeveloped communities. The existing food safety status of many African, South Asian, Central, and South American developing countries is distressing therefore; it seems much timely to highlight the areas for the improvement to ensure the supply of safe food to the population in these regions. Extensive literature search at PubMed, Science Direct and Medline was carried out during the current year to catch on relevant data from 1976 to date, using selective terms like food safety, South East Asia, Africa, Central and South America, and foodborne illness etc. Efforts were made to restrict the search to low income countries of these regions with reference to specific foodborne pathogens. This report briefly discusses the present food safety situation in these developing countries and associated consequences as prime issues, suggesting foodborne illness to be the most distressing threat for human health and economic growth.

System theory and safety models in Swedish, UK, Dutch and Australian road safety strategies.

PubMed

Hughes, B P; Anund, A; Falkmer, T

2015-01-01

Road safety strategies represent interventions on a complex social technical system level. An understanding of a theoretical basis and description is required for strategies to be structured and developed. Road safety strategies are described as systems, but have not been related to the theory, principles and basis by which systems have been developed and analysed. Recently, road safety strategies, which have been employed for many years in different countries, have moved to a 'vision zero', or 'safe system' style. The aim of this study was to analyse the successful Swedish, United Kingdom and Dutch road safety strategies against the older, and newer, Australian road safety strategies, with respect to their foundations in system theory and safety models. Analysis of the strategies against these foundations could indicate potential improvements. The content of four modern cases of road safety strategy was compared against each other, reviewed against scientific systems theory and reviewed against types of safety model. The strategies contained substantial similarities, but were different in terms of fundamental constructs and principles, with limited theoretical basis. The results indicate that the modern strategies do not include essential aspects of systems theory that describe relationships and interdependencies between key components. The description of these strategies as systems is therefore not well founded and deserves further development. Copyright © 2014 Elsevier Ltd. All rights reserved.

System safety in Stirling engine development

NASA Technical Reports Server (NTRS)

Bankaitis, H.

1981-01-01

The DOE/NASA Stirling Engine Project Office has required that contractors make safety considerations an integral part of all phases of the Stirling engine development program. As an integral part of each engine design subtask, analyses are evolved to determine possible modes of failure. The accepted system safety analysis techniques (Fault Tree, FMEA, Hazards Analysis, etc.) are applied in various degrees of extent at the system, subsystem and component levels. The primary objectives are to identify critical failure areas, to enable removal of susceptibility to such failures or their effects from the system and to minimize risk.

An Autonomous Flight Safety System

NASA Technical Reports Server (NTRS)

Bull, James B.; Lanzi, Raymond J.

2007-01-01

The Autonomous Flight Safety System (AFSS) being developed by NASA s Goddard Space Flight Center s Wallops Flight Facility and Kennedy Space Center has completed two successful developmental flights and is preparing for a third. AFSS has been demonstrated to be a viable architecture for implementation of a completely vehicle based system capable of protecting life and property in event of an errant vehicle by terminating the flight or initiating other actions. It is capable of replacing current human-in-the-loop systems or acting in parallel with them. AFSS is configured prior to flight in accordance with a specific rule set agreed upon by the range safety authority and the user to protect the public and assure mission success. This paper discusses the motivation for the project, describes the method of development, and presents an overview of the evolving architecture and the current status.

Essentials for Successful Organization Development Efforts.

ERIC Educational Resources Information Center

Boss, R. Wayne

1979-01-01

The purpose of organization development (OD) is to improve an organization's effectiveness in making decisions and changes and to reach the full potential of its personnel. Objectives of OD and essentials for successful programs are listed. Definitions of essentials and how they add to the effectiveness of OD are presented. (Author/BEF)

Marine safety manual, volume 4 : technical

DOT National Transportation Integrated Search

2005-01-01

A comprehensive manual which provides guidance on the application of Coast Guard regulations and explains the rationale behind their development is vital to the successful execution of the marine safety program. This volume is intended to serve that ...

2006 NASA Range Safety Annual Report

NASA Technical Reports Server (NTRS)

TenHaken, Ron; Daniels, B.; Becker, M.; Barnes, Zack; Donovan, Shawn; Manley, Brenda

2007-01-01

Throughout 2006, Range Safety was involved in a number of exciting and challenging activities and events, from developing, implementing, and supporting Range Safety policies and procedures-such as the Space Shuttle Launch and Landing Plans, the Range Safety Variance Process, and the Expendable Launch Vehicle Safety Program procedures-to evaluating new technologies. Range Safety training development is almost complete with the last course scheduled to go on line in mid-2007. Range Safety representatives took part in a number of panels and councils, including the newly formed Launch Constellation Range Safety Panel, the Range Commanders Council and its subgroups, the Space Shuttle Range Safety Panel, and the unmanned aircraft systems working group. Space based range safety demonstration and certification (formerly STARS) and the autonomous flight safety system were successfully tested. The enhanced flight termination system will be tested in early 2007 and the joint advanced range safety system mission analysis software tool is nearing operational status. New technologies being evaluated included a processor for real-time compensation in long range imaging, automated range surveillance using radio interferometry, and a space based range command and telemetry processor. Next year holds great promise as we continue ensuring safety while pursuing our quest beyond the Moon to Mars.

Generic Safety Requirements for Developing Safe Insulin Pump Software

PubMed Central

Zhang, Yi; Jetley, Raoul; Jones, Paul L; Ray, Arnab

2011-01-01

Background The authors previously introduced a highly abstract generic insulin infusion pump (GIIP) model that identified common features and hazards shared by most insulin pumps on the market. The aim of this article is to extend our previous work on the GIIP model by articulating safety requirements that address the identified GIIP hazards. These safety requirements can be validated by manufacturers, and may ultimately serve as a safety reference for insulin pump software. Together, these two publications can serve as a basis for discussing insulin pump safety in the diabetes community. Methods In our previous work, we established a generic insulin pump architecture that abstracts functions common to many insulin pumps currently on the market and near-future pump designs. We then carried out a preliminary hazard analysis based on this architecture that included consultations with many domain experts. Further consultation with domain experts resulted in the safety requirements used in the modeling work presented in this article. Results Generic safety requirements for the GIIP model are presented, as appropriate, in parameterized format to accommodate clinical practices or specific insulin pump criteria important to safe device performance. Conclusions We believe that there is considerable value in having the diabetes, academic, and manufacturing communities consider and discuss these generic safety requirements. We hope that the communities will extend and revise them, make them more representative and comprehensive, experiment with them, and use them as a means for assessing the safety of insulin pump software designs. One potential use of these requirements is to integrate them into model-based engineering (MBE) software development methods. We believe, based on our experiences, that implementing safety requirements using MBE methods holds promise in reducing design/implementation flaws in insulin pump development and evolutionary processes, therefore improving

Motivation of employers to encourage their employees to use safety belts (phase 2).

DOT National Transportation Integrated Search

1983-08-01

An employer manual is developed which offers guidelines for the elements of a successful safety bell program. The guidelines are based upon the model developed as a result of site visits to successful programs and synthesis of expert opinion. A needs...

Development of an Electronic Portfolio System Success Model: An Information Systems Approach

ERIC Educational Resources Information Center

Balaban, Igor; Mu, Enrique; Divjak, Blazenka

2013-01-01

This research has two main goals: to develop an instrument for assessing Electronic Portfolio (ePortfolio) success and to build a corresponding ePortfolio success model using DeLone and McLean's information systems success model as the theoretical framework. For this purpose, we developed an ePortfolio success measurement instrument and structural…

Developing and establishing the validity and reliability of the perceptions toward Aviation Safety Action Program (ASAP) and Line Operations Safety Audit (LOSA) questionnaires

NASA Astrophysics Data System (ADS)

Steckel, Richard J.

Aviation Safety Action Program (ASAP) and Line Operations Safety Audits (LOSA) are voluntary safety reporting programs developed by the Federal Aviation Administration (FAA) to assist air carriers in discovering and fixing threats, errors and undesired aircraft states during normal flights that could result in a serious or fatal accident. These programs depend on voluntary participation of and reporting by air carrier pilots to be successful. The purpose of the study was to develop and validate a measurement scale to measure U.S. air carrier pilots' perceived benefits and/or barriers to participating in ASAP and LOSA programs. Data from these surveys could be used to make changes to or correct pilot misperceptions of these programs to improve participation and the flow of data. ASAP and LOSA a priori models were developed based on previous research in aviation and healthcare. Sixty thousand ASAP and LOSA paper surveys were sent to 60,000 current U.S. air carrier pilots selected at random from an FAA database of pilot certificates. Two thousand usable ASAP and 1,970 usable LOSA surveys were returned and analyzed using Confirmatory Factor Analysis. Analysis of the data using confirmatory actor analysis and model generation resulted in a five factor ASAP model (Ease of use, Value, Improve, Trust and Risk) and a five factor LOSA model (Value, Improve, Program Trust, Risk and Management Trust). ASAP and LOSA data were not normally distributed, so bootstrapping was used. While both final models exhibited acceptable fit with approximate fit indices, the exact fit hypothesis and the Bollen-Stine p value indicated possible model mis-specification for both ASAP and LOSA models.

The Development of Laboratory Safety Questionnaire for Middle School Science Teachers

ERIC Educational Resources Information Center

Akpullukcu, Simge; Cavas, Bulent

2017-01-01

The purpose of this paper is to develop a "valid and reliable laboratory safety questionnaire" which could be used to identify science teachers' understanding about laboratory safety issues during their science laboratory activities. The questionnaire was developed from a literature review and prior instruments developed on laboratory…

A conceptual framework to development of construction safety culture in Indonesia

NASA Astrophysics Data System (ADS)

Armyn Machfudiyanto, Rossy; Latief, Yusuf

2017-12-01

Working accidents in the construction industry are among the highest in the world, affecting the three levels of both macro (National) mezzo (Enterprise) and micro (Projects) that need to be integrated in building a safety culture. The purpose of this research is to develop a conceptual framework in improving safety culture in the construction industry in Indonesia. The methodology was developed using literature study and deductive analysis which then performed expert validation to ensure the concept developed. The result of this research is that policy and institution as input to build safety culture which need to be followed up with increasing of company maturity which have implication to safety performance and construction project performance.

Developing and Testing the Health Care Safety Hotline

PubMed Central

Schneider, Eric C.; Ridgely, M. Susan; Quigley, Denise D.; Hunter, Lauren E.; Leuschner, Kristin J.; Weingart, Saul N.; Weissman, Joel S.; Zimmer, Karen P.; Giannini, Robert C.

2017-01-01

Abstract This article describes the design, development, and testing of the Health Care Safety Hotline, a prototype consumer reporting system for patient safety events. The prototype was designed and developed with ongoing review by a technical expert panel and feedback obtained during a public comment period. Two health care delivery organizations in one metropolitan area collaborated with the researchers to demonstrate and evaluate the system. The prototype was deployed and elicited information from patients, family members, and caregivers through a website or an 800 phone number. The reports were considered useful and had little overlap with information received by the health care organizations through their usual risk management, customer service, and patient safety monitoring systems. However, the frequency of reporting was lower than anticipated, suggesting that further refinements, including efforts to raise awareness by actively soliciting reports from subjects, might be necessary to substantially increase the volume of useful reports. It is possible that a single technology platform could be built to meet a variety of different patient safety objectives, but it may not be possible to achieve several objectives simultaneously through a single consumer reporting system while also establishing trust with patients, caregivers, and providers. PMID:28845353

Exploring the delivery of antiretroviral therapy for symptomatic HIV in Swaziland: threats to the successful treatment and safety of outpatients attending regional and district clinics.

PubMed

Armitage, Gerry; Hodgson, Ian; Wright, John; Bailey, Kerry; Mkhwana, Estel

2011-01-01

To examine the safety and acceptability of providing antiretroviral therapy (ART) in a resource poor setting. Two-stage observational and qualitative study. Rural hospital in Southern Africa. Structured observation using failure modes and effects analysis (FMEA) of the drug supply, dispensing, prescribing and administration processes. The findings from the FMEA were explored further in qualitative interviews with eight health professionals involved in the delivery of ART. To obtain a patient perspective, a stratified sample of 14 patients receiving ART was also interviewed. Key vulnerabilities in the process of ART provision include supply problems, poor packaging and labelling, inadequate knowledge among staff and lack of staff. Key barriers to successful patient adherence include transport inconsistency in supply and personal financial difficulties. There is, however, strong evidence of patient commitment and adherence. IMPLICATIONS AND CONCLUSION: Medication safety is relatively unexplored in the developing world. This study reveals an encouraging resilience in the health system and adherence among patients in the delivery of complex ART. The vulnerabilities identified, however, undermine patient safety and effectiveness of ART. There are implications for drug manufacturers; international aid agencies funding and supplying ART; and local practitioners. FMEA can help identify potential vulnerabilities and inform safety improvement interventions.

Endolymphatic Thoracic Duct Stent-Graft Reconstruction for Chylothorax: Approach, Technical Success, Safety, and Short-term Outcomes.

PubMed

Srinivasa, Rajiv N; Chick, Jeffrey Forris Beecham; Hage, Anthony N; Gemmete, Joseph J; Murrey, Douglas C; Srinivasa, Ravi N

2018-04-01

To report approach, technical success, safety, and short-term outcomes of thoracic duct stent-graft reconstruction for the treatment of chylothorax. Two patients, 1 (50%) male and 1 (50%) female, with mean age of 38 years (range: 16-59 years) underwent endolymphatic thoracic duct stent-graft reconstruction between September 2016 and July 2017. Patients had radiographic left-sided chylothoraces (n = 2) from idiopathic causes (n = 1) and heart transplantation (n = 1). In both (100%) patients, antegrade lymphatic access was used to opacify the thoracic duct after which retrograde access was used for thoracic duct stent-graft placement. Pelvic lymphangiography technical success, antegrade cisterna chyli cannulation technical success, thoracic duct opacification technical success, retrograde thoracic duct access technical success, thoracic duct stent-graft reconstruction technical success, ethiodized oil volume, contrast volume, estimated blood loss, procedure time, fluoroscopy time, radiation dose, clinical success, complications, deaths, and follow-up were recorded. Pelvic lymphangiography, antegrade cisterna chyli cannulation, thoracic duct opacification, retrograde thoracic duct access, and thoracic duct stent-graft reconstruction were technically successful in both (100%) patients. Mean ethiodized oil volume was 8 mL (range: 5-10 mL). Mean contrast volume was 13 mL (range: 5-20 mL). Mean estimated blood loss was 13 mL (range: 10-15 mL). Mean fluoroscopy time was 50.4 min (range: 31.2-69.7 min). Mean dose area product and reference air kerma were 954.4 μGmy 2 (range: 701-1,208 μGmy 2 ) and 83.5 mGy (range: 59-108 mGy), respectively. Chylothorax resolved in both (100%) patients. There were no minor or major complications directly related to the procedure. Thoracic duct stent-graft reconstruction may be a technically successful and safe alternative to thoracic duct embolization, disruption, and surgical ligation for the treatment of chylothorax

Development of a Culturally Informed Child Safety Curriculum for American Indian Families.

PubMed

Berns, Ryan M; Tomayko, Emily J; Cronin, Kate A; Prince, Ronald J; Parker, Tassy; Adams, Alexandra K

2017-04-01

American Indian (AI) children are disproportionately affected by unintentional injuries, with injury mortality rates approximately 2.3 times higher than the combined rates for all children in the United States. Although multiple risk factors are known to contribute to these increased rates, a comprehensive, culturally informed curriculum that emphasizes child safety is lacking for this population. In response to this need, academic and tribal researchers, tribal community members, tribal wellness staff, and national child safety experts collaborated to develop a novel child safety curriculum. This paper describes its development and community delivery. We developed the safety curriculum as part of a larger randomized controlled trial known as Healthy Children, Strong Families 2 (HCSF2), a family-based intervention targeting obesity prevention in early childhood (2-5 years). During the development of the HCSF2 intervention, participating tribal communities expressed concern about randomizing enrolled families to a control group who would not receive an intervention. To address this concern and the significant disparities in injuries and unintentional death rates among AI children, we added an active control group (Safety Journey) that would utilize our safety curriculum. Satisfaction surveys administered at the 12-month time point of the intervention indicate 94% of participants (N = 196) were either satisfied or very satisfied with the child safety curriculum. The majority of participants (69%) reported spending more than 15 min with the curriculum materials each month, and 83% thought the child safety newsletters were either helpful or very helpful in making changes to improve their family's safety. These findings indicate these child safety materials have been well received by HCSF2 participants. The use of community-engaged approaches to develop this curriculum represents a model that could be adapted for other at-risk populations and serves as an initial

Developing Critical Thinking Skills for Information Seeking Success

ERIC Educational Resources Information Center

Wallace, Elise D.; Jefferson, Renee N.

2013-01-01

Critical thinking skills are required to successfully navigate the overwhelming amount of information sources available today. To address the challenge of developing critical thinking skills, this empirical study examines the effectiveness of exercises in developing thinking skills in college freshmen students. The workbook exercises were designed…

Scale development of safety management system evaluation for the airline industry.

PubMed

Chen, Ching-Fu; Chen, Shu-Chuan

2012-07-01

The airline industry relies on the implementation of Safety Management System (SMS) to integrate safety policies and augment safety performance at both organizational and individual levels. Although there are various degrees of SMS implementation in practice, a comprehensive scale measuring the essential dimensions of SMS is still lacking. This paper thus aims to develop an SMS measurement scale from the perspective of aviation experts and airline managers to evaluate the performance of company's safety management system, by adopting Schwab's (1980) three-stage scale development procedure. The results reveal a five-factor structure consisting of 23 items. The five factors include documentation and commands, safety promotion and training, executive management commitment, emergency preparedness and response plan and safety management policy. The implications of this SMS evaluation scale for practitioners and future research are discussed. Copyright © 2012 Elsevier Ltd. All rights reserved.

Study on development and application of platform with students' safety based on SOA

NASA Astrophysics Data System (ADS)

Jiang, Derong

2011-10-01

Students' safety management is a very important work, which is responsible for the entire school student security problems, student safety primarily prevent, only advance predict various of the imminent problems, to better protect their safety. The system mainly used on the development request the student safety management, safety evaluation, safety education, and etc, which are for daily management work completed for students in the security digital management. Development of the system can reduce the safety management for department working pressure, meanwhile, can reduce the labor force to use, accelerate query speed, strengthens the management, as well as the national various departments about the information step, making each management standardized. Therefore, developing a set of suitability and the populace, compatibly good system is very necessary.

Safety Characteristics in System Application Software for Human Rated Exploration

NASA Technical Reports Server (NTRS)

Mango, E. J.

2016-01-01

NASA and its industry and international partners are embarking on a bold and inspiring development effort to design and build an exploration class space system. The space system is made up of the Orion system, the Space Launch System (SLS) and the Ground Systems Development and Operations (GSDO) system. All are highly coupled together and dependent on each other for the combined safety of the space system. A key area of system safety focus needs to be in the ground and flight application software system (GFAS). In the development, certification and operations of GFAS, there are a series of safety characteristics that define the approach to ensure mission success. This paper will explore and examine the safety characteristics of the GFAS development.

Developing an OMERACT Core Outcome Set for Assessing Safety Components in Rheumatology Trials: The OMERACT Safety Working Group.

PubMed

Klokker, Louise; Tugwell, Peter; Furst, Daniel E; Devoe, Dan; Williamson, Paula; Terwee, Caroline B; Suarez-Almazor, Maria E; Strand, Vibeke; Woodworth, Thasia; Leong, Amye L; Goel, Niti; Boers, Maarten; Brooks, Peter M; Simon, Lee S; Christensen, Robin

2017-12-01

Failure to report harmful outcomes in clinical research can introduce bias favoring a potentially harmful intervention. While core outcome sets (COS) are available for benefits in randomized controlled trials in many rheumatic conditions, less attention has been paid to safety in such COS. The Outcome Measures in Rheumatology (OMERACT) Filter 2.0 emphasizes the importance of measuring harms. The Safety Working Group was reestablished at the OMERACT 2016 with the objective to develop a COS for assessing safety components in trials across rheumatologic conditions. The safety issue has previously been discussed at OMERACT, but without a consistent approach to ensure harms were included in COS. Our methods include (1) identifying harmful outcomes in trials of interventions studied in patients with rheumatic diseases by a systematic literature review, (2) identifying components of safety that should be measured in such trials by use of a patient-driven approach including qualitative data collection and statistical organization of data, and (3) developing a COS through consensus processes including everyone involved. Members of OMERACT including patients, clinicians, researchers, methodologists, and industry representatives reached consensus on the need to continue the efforts on developing a COS for safety in rheumatology trials. There was a general agreement about the need to identify safety-related outcomes that are meaningful to patients, framed in terms that patients consider relevant so that they will be able to make informed decisions. The OMERACT Safety Working Group will advance the work previously done within OMERACT using a new patient-driven approach.

Development and Implementation of a Food Safety Knowledge Instrument

ERIC Educational Resources Information Center

Byrd-Bredbenner, Carol; Wheatley, Virginia; Schaffner, Donald; Bruhn, Christine; Blalock, Lydia; Maurer, Jaclyn

2007-01-01

Little is known about the food safety knowledge of young adults. In addition, few knowledge questionnaires and no comprehensive, criterion-referenced measure that assesses the full range of food safety knowledge could be identified. Without appropriate, valid, and reliable measures and baseline data, it is difficult to develop and implement…

Understanding adolescent development: implications for driving safety.

PubMed

Keating, Daniel P

2007-01-01

The implementation of Graduated Driver Licensing (GDL) programs has significantly improved the crash and fatality rates of novice teen drivers, but these rates remain unacceptably high. A review of adolescent development research was undertaken to identify potential areas of improvement. Research support for GDL was found to be strong, particularly regarding early acquisition of expertise in driving safety (beyond driving skill), and to limitations that reduce opportunities for distraction. GDL regimes are highly variable, and no US jurisdictions have implemented optimal regimes. Expanding and improving GDL to enhance acquisition of expertise and self-regulation are indicated for implementation and for applied research. Driver training that effectively incorporates safety goals along with driving skill is another target. The insurance industry will benefit from further GDL enhancements. Benefits may accrue to improved driver training, improved simulation devices during training, and automated safety feedback instrumentation.

Factors Driving Learner Success in Online Professional Development

ERIC Educational Resources Information Center

Vu, Phu; Cao, Vien; Vu, Lan; Cepero, Jude

2014-01-01

This study examined factors that contributed to the success of online learners in an online professional development course. Research instruments included an online survey and learners' activity logs in an online professional development course for 512 in-service teachers. The findings showed that there were several factors affecting online…

Career Mapping for Professional Development and Succession Planning.

PubMed

Webb, Tammy; Diamond-Wells, Tammy; Jeffs, Debra

Career mapping facilitates professional development of nurses by education specialists and nurse managers. On the basis of national Nursing Professional Development Scope and Standards, our education and professional development framework supports the organization's professional practice model and provides a foundation for the professional career map. This article describes development, implementation, and evaluation of the professional career map for nurses at a large children's hospital to support achievement of the nursing strategic goals for succession planning and professional development.

A Compendium of Energy Conservation Success Stories

DOE R&D Accomplishments Database

1988-09-01

Three-quarters of DOE's Conservation R and D funds have been devoted to technology research and development: basic and applied research, exploratory R and D, engineering feasibility studies, pilot-scale prototype R and D, and technology demonstration. Non R and D projects have involved technology assessment program planning and analysis, model development, technology transfer and consumer information, health effects and safety research, and technical support for rule making. The success stories summarized in this compendium fall into three general categories: Completed Technology Success Stories, projects that have resulted in new energy-saving technologies that are presently being used in the private sector; Technical Success Stories, projects that have produced or disseminated important scientific/technical information likely to result in future energy savings; Program Success Stories, non-R and D activities that have resulted in nationally significant energy benefits. The Energy Conservation research and development program at DOE is managed by the Office of Conservation under the direction of the Deputy Assistant Secretary for Conservation. Three subordinate Program Offices correspond to the buildings, transportation, and industrial end-use sectors. A fourth subordinate Program Office{endash}Energy Utilization Research{endash}sponsors research and technical inventions for all end-use sectors.

Development and validation of a remote home safety protocol.

PubMed

Romero, Sergio; Lee, Mi Jung; Simic, Ivana; Levy, Charles; Sanford, Jon

2018-02-01

Environmental assessments and subsequent modifications conducted by healthcare professionals can enhance home safety and promote independent living. However, travel time, expense and the availability of qualified professionals can limit the broad application of this intervention. Remote technology has the potential to increase access to home safety evaluations. This study describes the development and validation of a remote home safety protocol that can be used by a caregiver of an elderly person to video-record their home environment for later viewing and evaluation by a trained professional. The protocol was developed based on literature reviews and evaluations from clinical and content experts. Cognitive interviews were conducted with a group of six caregivers to validate the protocol. The final protocol included step-by-step directions to record indoor and outdoor areas of the home. The validation process resulted in modifications related to safety, clarity of the protocol, readability, visual appearance, technical descriptions and usability. Our final protocol includes detailed instructions that a caregiver should be able to follow to record a home environment for subsequent evaluation by a home safety professional. Implications for Rehabilitation The results of this study have several implications for rehabilitation practice The remote home safety evaluation protocol can potentially improve access to rehabilitation services for clients in remote areas and prevent unnecessary delays for needed care. Using our protocol, a patient's caregiver can partner with therapists to quickly and efficiently evaluate a patient's home before they are released from the hospital. Caregiver narration, which reflects a caregiver's own perspective, is critical to evaluating home safety. In-home safety evaluations, currently not available to all who need them due to access barriers, can enhance a patient's independence and provide a safer home environment.

Development and Validation of a Safety Climate Scale for Manufacturing Industry

PubMed Central

Ghahramani, Abolfazl; Khalkhali, Hamid R.

2015-01-01

Background This paper describes the development of a scale for measuring safety climate. Methods This study was conducted in six manufacturing companies in Iran. The scale developed through conducting a literature review about the safety climate and constructing a question pool. The number of items was reduced to 71 after performing a screening process. Results The result of content validity analysis showed that 59 items had excellent item content validity index (≥ 0.78) and content validity ratio (> 0.38). The exploratory factor analysis resulted in eight safety climate dimensions. The reliability value for the final 45-item scale was 0.96. The result of confirmatory factor analysis showed that the safety climate model is satisfactory. Conclusion This study produced a valid and reliable scale for measuring safety climate in manufacturing companies. PMID:26106508

Person-centered endoscopy safety checklist: Development, implementation, and evaluation

PubMed Central

Dubois, Hanna; Schmidt, Peter T; Creutzfeldt, Johan; Bergenmar, Mia

2017-01-01

AIM To describe the development and implementation of a person-centered endoscopy safety checklist and to evaluate the effects of a “checklist intervention”. METHODS The checklist, based on previously published safety checklists, was developed and locally adapted, taking patient safety aspects into consideration and using a person-centered approach. This novel checklist was introduced to the staff of an endoscopy unit at a Stockholm University Hospital during half-day seminars and team training sessions. Structured observations of the endoscopy team’s performance were conducted before and after the introduction of the checklist. In addition, questionnaires focusing on patient participation, collaboration climate, and patient safety issues were collected from patients and staff. RESULTS A person-centered safety checklist was developed and introduced by a multi-professional group in the endoscopy unit. A statistically significant increase in accurate patient identity verification by the physicians was noted (from 0% at baseline to 87% after 10 mo, P < 0.001), and remained high among nurses (93% at baseline vs 96% after 10 mo, P = nonsignificant). Observations indicated that the professional staff made frequent attempts to use the checklist, but compliance was suboptimal: All items in the observed nurse-led “summaries” were included in 56% of these interactions, and physicians participated by directly facing the patient in 50% of the interactions. On the questionnaires administered to the staff, items regarding collaboration and the importance of patient participation were rated more highly after the introduction of the checklist, but this did not result in statistical significance (P = 0.07/P = 0.08). The patients rated almost all items as very high both before and after the introduction of the checklist; hence, no statistical difference was noted. CONCLUSION The intervention led to increased patient identity verification by physicians - a patient safety

Development of an evaluation framework for African-European hospital patient safety partnerships.

PubMed

Rutter, Paul; Syed, Shamsuzzoha B; Storr, Julie; Hightower, Joyce D; Bagheri-Nejad, Sepideh; Kelley, Edward; Pittet, Didier

2014-04-01

Patient safety is recognised as a significant healthcare problem worldwide, and healthcare-associated infections are an important aspect. African Partnerships for Patient Safety is a WHO programme that pairs hospitals in Africa with hospitals in Europe with the objective to work together to improve patient safety. To describe the development of an evaluation framework for hospital-to-hospital partnerships participating in the programme. The framework was structured around the programme's three core objectives: facilitate strong interhospital partnerships, improve in-hospital patient safety and spread best practices nationally. Africa-based clinicians, their European partners and experts in patient safety were closely involved in developing the evaluation framework in an iterative process. The process defined six domains of partnership strength, each with measurable subdomains. We developed a questionnaire to measure these subdomains. Participants selected six indicators of hospital patient safety improvement from a short-list of 22 based on their relevance, sensitivity to intervention and measurement feasibility. Participants proposed 20 measures of spread, which were refined into a two-part conceptual framework, and a data capture tool created. Taking a highly participatory approach that closely involved its end users, we developed an evaluation framework and tools to measure partnership strength, patient safety improvements and the spread of best practice.

Developing a theoretical model and questionnaire survey instrument to measure the success of electronic health records in residential aged care.

PubMed

Yu, Ping; Qian, Siyu

2018-01-01

Electronic health records (EHR) are introduced into healthcare organizations worldwide to improve patient safety, healthcare quality and efficiency. A rigorous evaluation of this technology is important to reduce potential negative effects on patient and staff, to provide decision makers with accurate information for system improvement and to ensure return on investment. Therefore, this study develops a theoretical model and questionnaire survey instrument to assess the success of organizational EHR in routine use from the viewpoint of nursing staff in residential aged care homes. The proposed research model incorporates six variables in the reformulated DeLone and McLean information systems success model: system quality, information quality, service quality, use, user satisfaction and net benefits. Two variables training and self-efficacy were also incorporated into the model. A questionnaire survey instrument was designed to measure the eight variables in the model. After a pilot test, the measurement scale was used to collect data from 243 nursing staff members in 10 residential aged care homes belonging to three management groups in Australia. Partial least squares path modeling was conducted to validate the model. The validated EHR systems success model predicts the impact of the four antecedent variables-training, self-efficacy, system quality and information quality-on the net benefits, the indicator of EHR systems success, through the intermittent variables use and user satisfaction. A 24-item measurement scale was developed to quantitatively evaluate the performance of an EHR system. The parsimonious EHR systems success model and the measurement scale can be used to benchmark EHR systems success across organizations and units and over time.

Safety leadership: application in construction site.

PubMed

Cooper, Dominic

2010-01-01

The extant safety literature suggests that managerial Safety Leadership is vital to the success and maintenance of a behavioral safety process. The current paper explores the role of Managerial Safety Leadership behaviors in the success of a behavioral safety intervention in the Middle-East with 47,000 workers from multiple nationalities employed by fourteen sub-contractors and one main contractor. A quasi-experimental repeating ABABAB, within groups design was used. Measurement focused on managerial Safety Leadership and employee safety behaviors as well as Corrective Actions. Data was collected over 104 weeks. During this time, results show safety behavior improved by 30 percentage points from an average of 65% during baseline to an average of 95%. The site achieved 121 million man-hours free of lost-time injuries on the longest run. Stepwise multiple regression analyses indicated 86% of the variation in employee safety behavior was associated with senior, middle and front-line manager's Safety Leadership behaviors and the Corrective Action Rate. Approximately 38% of the variation in the Total Recordable Incident Rate (TRIR) was associated with the Observation rate, Corrective Action Rate and Observers Records of managerial safety leaders (Visible Ongoing Support). The results strongly suggest manager's Safety Leadership influences the success of Behavioral Safety processes.

System safety engineering in the development of advanced surface transportation vehicles

NASA Technical Reports Server (NTRS)

Arnzen, H. E.

1971-01-01

Applications of system safety engineering to the development of advanced surface transportation vehicles are described. As a pertinent example, the paper describes a safety engineering efforts tailored to the particular design and test requirements of the Tracked Air Cushion Research Vehicle (TACRV). The test results obtained from this unique research vehicle provide significant design data directly applicable to the development of future tracked air cushion vehicles that will carry passengers in comfort and safety at speeds up to 300 miles per hour.

Successful remediation of patient safety incidents: a tale of two medication errors.

PubMed

Helmchen, Lorens A; Richards, Michael R; McDonald, Timothy B

2011-01-01

As patient safety acquires strategic importance for all stakeholders in the health care delivery chain, one promising mechanism centers on the proactive disclosure of medical errors to patients. Yet, disclosure and apology alone will not be effective in fully addressing patients' concerns after an adverse event unless they are paired with a remediation component. The purpose of this study was to identify key features of successful remediation efforts that accompany the proactive disclosure of medical errors to patients. We describe and contrast two recent and very similar cases of preventable medical error involving inappropriate medication at a large tertiary-care academic medical center in the Midwestern United States. Despite their similarity, the two medical errors led to very different health outcomes and remediation trajectories for the injured patients. Although one error causing no permanent harm was mismanaged to the lasting dissatisfaction of the patient, the other resulted in the death of the patient but was remediated to the point of allowing the family to come to terms with the loss and even restored a modicum of trust in the providers' sincerity. To maximize the opportunities for successful remediation, as soon as possible after the incident, providers should pledge to injured patients and their relatives that they will assist and accompany them in their recovery as long as necessary and then follow through on their pledge. As the two case studies show, it takes training and vigilance to ensure adherence to these principles and reach an optimal outcome for patients and their relatives.

Development of Large-Scale Spacecraft Fire Safety Experiments

NASA Technical Reports Server (NTRS)

Ruff, Gary A.; Urban, David; Fernandez-Pello, A. Carlos; T'ien, James S.; Torero, Jose L.; Legros, Guillaume; Eigenbrod, Christian; Smirnov, Nickolay; Fujita, Osamu; Cowlard, Adam J.;

Advancing a sociotechnical systems approach to workplace safety--developing the conceptual framework.

PubMed

Carayon, Pascale; Hancock, Peter; Leveson, Nancy; Noy, Ian; Sznelwar, Laerte; van Hootegem, Geert

2015-01-01

Traditional efforts to deal with the enormous problem of workplace safety have proved insufficient, as they have tended to neglect the broader sociotechnical environment that surrounds workers. Here, we advocate a sociotechnical systems approach that describes the complex multi-level system factors that contribute to workplace safety. From the literature on sociotechnical systems, complex systems and safety, we develop a sociotechnical model of workplace safety with concentric layers of the work system, socio-organisational context and the external environment. The future challenges that are identified through the model are highlighted. Understanding the environmental, organisational and work system factors that contribute to workplace safety will help to develop more effective and integrated solutions to deal with persistent workplace safety problems. Solutions to improve workplace safety need to recognise the broad sociotechnical system and the respective interactions between the system elements and levels.

Transit safety retrofit package development : final report.

DOT National Transportation Integrated Search

2014-07-01

This report provides a summary of the Transit Safety Retrofit Package (TRP) Development project and its results. The report documents results of each project phase, and provides recommended next steps as well as a vision for a next generation TRP. Th...

Review article: practical current issues in perioperative patient safety.

PubMed

Eichhorn, John H

2013-02-01

This brief review provides an overview and, importantly, a context perspective of relevant current practical issues in perioperative patient safety. The dramatic improvement in anesthesia patient safety over the last 30 years was not initiated by electronic monitors but, rather, largely by a set of behaviours known as "safety monitoring" that were then made decidedly more effective by extending the human senses through electronic monitoring, for example, capnography and pulse oximetry. In the highly developed world, this current success is threatened by complacency and production pressure. In some areas of the developing/underdeveloped world, the challenge is implementing the components of anesthesia practice that will bring safety improvements to parallel the overall current success, for instance, applying the World Federation of Societies of Anaesthesiologists (WFSA) "International Standards for A Safe Practice of Anaesthesia". Generally, expanding the current success in safety involves many practical issues. System issues involve research, effective reporting mechanisms and analysis/broadcasting of results, perioperative communication (including "speaking up to power"), and checklists. Monitoring issues involve enforcing existing published monitoring standards and also recognizing the risk of danger to the patient from hypoventilation during procedural sedation and from postoperative intravenous pain medications. Issues of clinical care include medication errors in the operating room, cerebral hypoperfusion (especially in the head-up position), dangers of airway management, postoperative residual weakness from muscle relaxants, operating room fires, and risks specific in obstetric anesthesia. Recognition of the issues outlined here and empowerment of all anesthesia professionals, from the most senior professors and administrators to the newest practitioners, should help maintain, solidify, and expand the improvements in anesthesia and perioperative patient

Mathematical modeling of efficacy and safety for anticancer drugs clinical development.

PubMed

Lavezzi, Silvia Maria; Borella, Elisa; Carrara, Letizia; De Nicolao, Giuseppe; Magni, Paolo; Poggesi, Italo

2018-01-01

Drug attrition in oncology clinical development is higher than in other therapeutic areas. In this context, pharmacometric modeling represents a useful tool to explore drug efficacy in earlier phases of clinical development, anticipating overall survival using quantitative model-based metrics. Furthermore, modeling approaches can be used to characterize earlier the safety and tolerability profile of drug candidates, and, thus, the risk-benefit ratio and the therapeutic index, supporting the design of optimal treatment regimens and accelerating the whole process of clinical drug development. Areas covered: Herein, the most relevant mathematical models used in clinical anticancer drug development during the last decade are described. Less recent models were considered in the review if they represent a standard for the analysis of certain types of efficacy or safety measures. Expert opinion: Several mathematical models have been proposed to predict overall survival from earlier endpoints and validate their surrogacy in demonstrating drug efficacy in place of overall survival. An increasing number of mathematical models have also been developed to describe the safety findings. Modeling has been extensively used in anticancer drug development to individualize dosing strategies based on patient characteristics, and design optimal dosing regimens balancing efficacy and safety.

The impact of nursing leadership on patient safety in a developing country.

PubMed

Stewart, Lee; Usher, Kim

2010-11-01

This article is a report of a study to identify the ways nursing leaders and managers in a developing country have an impact on patient safety. The attempt to address the problem of patient safety in health care is a global issue. Literature addressing the significant impact that nursing leadership has on patient safety is extensive and focuses almost exclusively on the developed world. A critical ethnography was conducted with senior registered nursing leaders and managers throughout the Fiji Islands, specifically those in the Head Office of the Fiji Ministry of Health and the most senior nurse in a hospital or community health service. Semi-structured interviews were conducted with senior nursing leaders and managers in Fiji. Thematic analysis of the interviews was undertaken from a critical theory perspective, with reference to the macro socio-political system of the Fiji Ministry of Health. Four interrelated issues regarding the nursing leaders and managers' impact on patient safety emerged from the study. Empowerment of nursing leaders and managers, an increased focus on the patient, the necessity to explore conditions for front-line nurses and the direct relationship between improved nursing conditions and increased patient safety mirrored literature from developed countries. The findings have significant implications for developing countries and it is crucial that support for patient safety in developing countries become a focus for the international nursing community. Nursing leaders and managers' increased focus on their own place in the hierarchy of the health care system and on nursing conditions as these affect patient safety could decrease adverse patient outcomes. The findings could assist the global nursing community to better support developing countries in pursuing a patient safety agenda. © 2010 Blackwell Publishing Ltd.

Developing patient safety in dentistry.

PubMed

Pemberton, M N

2014-10-01

Patient safety has always been important and is a source of public concern. Recent high profile scandals and subsequent reports, such as the Francis report into the failings at Mid Staffordshire, have raised those concerns even higher. Mortality and significant morbidity associated with the practice of medicine has led to many strategies to help improve patient safety, however, with its lack of associated mortality and lower associated morbidity, dentistry has been slower at systematically considering how patient safety can be improved. Recently, several organisations, researchers and clinicians have discussed the need for a patient safety culture in dentistry. Strategies are available to help improve patient safety in healthcare and deserve further consideration in dentistry.

Modeling and applications in microbial food safety

USDA-ARS?s Scientific Manuscript database

Mathematical modeling is a scientific and systematic approach to study and describe the recurrent events or phenomena with successful application track for decades. When models are properly developed and validated, their applications may save costs and time. For the microbial food safety concerns, ...

Improving Patient Safety in Anesthesia: A Success Story?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Botney, Richard

2008-05-01

Anesthesia is necessary for surgery; however, it does not deliver any direct therapeutic benefit. The risks of anesthesia must therefore be as low as possible. Anesthesiology has been identified as a leader in improving patient safety. Anesthetic mortality has decreased, and in healthy patients can be as low as 1:250,000. Trends in anesthetic morbidity have not been as well defined, but it appears that the risk of injury is decreasing. Studies of error during anesthesia and Closed Claims studies have identified sources of risk and methods to reduce the risks associated with anesthesia. These include changes in technology, such asmore » anesthetic delivery systems and monitors, the application of human factors, the use of simulation, and the establishment of reporting systems. A review of the important events in the past 50 years illustrates the many steps that have contributed to the improvements in anesthesia safety.« less

The successful evolution of a voluntary vessel safety program in the USA.

PubMed

Hughes, Leslie

2006-01-01

The North Pacific Fishing Vessel Owners' Association (NPFVOA) is a non-profit association dedicated to safety education and training for commercial fishermen and other mariners. Funding is provided primarily through member contributions and also through tuition fees and sales of materials. Members are primarily fishing vessel owners and fishing-related companies, from small salmon boats with single operators to large processing ships with crews of 150 or more. The Association also works together with insurance underwriters and brokers, maritime attorneys and fishing industry support businesses. It works closely with the United States Coast Guard, the Occupational Safety and Health Administration (OSHA) of the United States Department of Labor, the National Institute for Occupational Safety and Health (NIOSH), and many state agencies. There are three primary components of the NPFVOA Vessel Safety Program--a comprehensive safety manual, a series of safety and survival at sea videotapes, and a crew training program. The vessel safety manual includes 300 pages of text and illustrations covering subjects ranging from vessel familiarity for deckhands to stability for the owner and skipper. It is based on the experience of those who have fished the Bering Sea and the North Pacific. The manual calls for vessel owners and skippers to adopt safety practices specific to the vessel's characteristics and service, the waters fished, the season fished and the experience of the crew. The safety and survival videotape series is designed to complement hands-on training classes. The crew training program uses hands-on practice to dramatize and enliven the information presented in the manual and on the videotapes. Courses are designed to be portable and conducted in numerous ports and states. The NPFVOA also publishes a quarterly newsletter covering its safety program, other relevant safety information and reports of lessons learned from serious fishing vessel accidents.

Safety of High Speed Ground Transportation Systems : Analytical Methodology for Safety Validation of Computer Controlled Subsystems : Volume 2. Development of a Safety Validation Methodology

DOT National Transportation Integrated Search

1995-01-01

This report describes the development of a methodology designed to assure that a sufficiently high level of safety is achieved and maintained in computer-based systems which perform safety cortical functions in high-speed rail or magnetic levitation ...

The development of a successful physician compensation plan.

PubMed

Berkowitz, Steven M

2002-10-01

Physician compensation plans are critical to the success of a physician group or may lead to the demise of the group. Essential components of the development and implementation of a successful physician compensation plan include: strategic planning, physician understanding and buy-in, appropriate incentives, objective performance measurement, and a specific funding source or mechanism. There are two basic philosophies to consider for use: the market-based model and the net economic contribution model. Advantages and disadvantages of each are discussed. Methods of incorporating these multiple aspects into a single plan are described.

Workforce perceptions of hospital safety culture: development and validation of the patient safety climate in healthcare organizations survey.

PubMed

Singer, Sara; Meterko, Mark; Baker, Laurence; Gaba, David; Falwell, Alyson; Rosen, Amy

2007-10-01

To describe the development of an instrument for assessing workforce perceptions of hospital safety culture and to assess its reliability and validity. Primary data collected between March 2004 and May 2005. Personnel from 105 U.S. hospitals completed a 38-item paper and pencil survey. We received 21,496 completed questionnaires, representing a 51 percent response rate. Based on review of existing safety climate surveys, we developed a list of key topics pertinent to maintaining a culture of safety in high-reliability organizations. We developed a draft questionnaire to address these topics and pilot tested it in four preliminary studies of hospital personnel. We modified the questionnaire based on experience and respondent feedback, and distributed the revised version to 42,249 hospital workers. We randomly divided respondents into derivation and validation samples. We applied exploratory factor analysis to responses in the derivation sample. We used those results to create scales in the validation sample, which we subjected to multitrait analysis (MTA). We identified nine constructs, three organizational factors, two unit factors, three individual factors, and one additional factor. Constructs demonstrated substantial convergent and discriminant validity in the MTA. Cronbach's alpha coefficients ranged from 0.50 to 0.89. It is possible to measure key salient features of hospital safety climate using a valid and reliable 38-item survey and appropriate hospital sample sizes. This instrument may be used in further studies to better understand the impact of safety climate on patient safety outcomes.

The development of neural stimulators: a review of preclinical safety and efficacy studies.

PubMed

Shepherd, Robert K; Villalobos, Joel; Burns, Owen; Nayagam, David

2018-05-14

Given the rapid expansion of the field of neural stimulation and the rigorous regulatory approval requirements required before these devices can be applied clinically, it is important that there is clarity around conducting preclinical safety and efficacy studies required for the development of this technology. The present review examines basic design principles associated with the development of a safe neural stimulator and describes the suite of preclinical safety studies that need to be considered when taking a device to clinical trial. Neural stimulators are active implantable devices that provide therapeutic intervention, sensory feedback or improved motor control via electrical stimulation of neural or neuro-muscular tissue in response to trauma or disease. Because of their complexity, regulatory bodies classify these devices in the highest risk category (Class III), and they are therefore required to go through a rigorous regulatory approval process before progressing to market. The successful development of these devices is achieved through close collaboration across disciplines including engineers, scientists and a surgical/clinical team, and the adherence to clear design principles. Preclinical studies form one of several key components in the development pathway from concept to product release of neural stimulators. Importantly, these studies provide iterative feedback in order to optimise the final design of the device. Key components of any preclinical evaluation include: in vitro studies that are focussed on device reliability and include accelerated testing under highly controlled environments; in vivo studies using animal models of the disease or injury in order to assess safety and, given an appropriate animal model, the efficacy of the technology under both passive and electrically active conditions; and human cadaver and ex vivo studies designed to ensure the device's form factor conforms to human anatomy, to optimise the surgical approach and to

10 CFR 851.11 - Development and approval of worker safety and health program.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false Development and approval of worker safety and health program. 851.11 Section 851.11 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Program Requirements § 851.11 Development and approval of worker safety and health program. (a) Preparation and...

Development and initial validation of an Aviation Safety Climate Scale.

PubMed

Evans, Bronwyn; Glendon, A Ian; Creed, Peter A

2007-01-01

A need was identified for a consistent set of safety climate factors to provide a basis for aviation industry benchmarking. Six broad safety climate themes were identified from the literature and consultations with industry safety experts. Items representing each of the themes were prepared and administered to 940 Australian commercial pilots. Data from half of the sample (N=468) were used in an exploratory factor analysis that produced a 3-factor model of Management commitment and communication, Safety training and equipment, and Maintenance. A confirmatory factor analysis on the remaining half of the sample showed the 3-factor model to be an adequate fit to the data. The results of this study have produced a scale of safety climate for aviation that is both reliable and valid. This study developed a tool to assess the level of perceived safety climate, specifically of pilots, but may also, with minor modifications, be used to assess other groups' perceptions of safety climate.

Challenges in Developing Competency-based Training Curriculum for Food Safety Regulators in India.

PubMed

Thippaiah, Anitha; Allagh, Komal Preet; Murthy, G V

2014-07-01

The Food Safety and Standards Act have redefined the roles and responsibilities of food regulatory workforce and calls for highly skilled human resources as it involves complex management procedures. 1) Identify the competencies needed among the food regulatory workforce in India. 2) Develop a competency-based training curriculum for food safety regulators in the country. 3) Develop training materials for use to train the food regulatory workforce. The Indian Institute of Public Health, Hyderabad, led the development of training curriculum on food safety with technical assistance from the Royal Society for Public Health, UK and the National Institute of Nutrition, India. The exercise was to facilitate the implementation of new Act by undertaking capacity building through a comprehensive training program. A competency-based training needs assessment was conducted before undertaking the development of the training materials. THE TRAINING PROGRAM FOR FOOD SAFETY OFFICERS WAS DESIGNED TO COMPRISE OF FIVE MODULES TO INCLUDE: Food science and technology, Food safety management systems, Food safety legislation, Enforcement of food safety regulations, and Administrative functions. Each module has a facilitator guide for the tutor and a handbook for the participant. Essentials of Food Hygiene-I (Basic level), II and III (Retail/ Catering/ Manufacturing) were primarily designed for training of food handlers and are part of essential reading for food safety regulators. The Food Safety and Standards Act calls for highly skilled human resources as it involves complex management procedures. Despite having developed a comprehensive competency-based training curriculum by joint efforts by the local, national, and international agencies, implementation remains a challenge in resource-limited setting.

Development of a model for predicting NASA/MSFC program success

NASA Technical Reports Server (NTRS)

Riggs, Jeffrey; Miller, Tracy; Finley, Rosemary

1990-01-01

Research conducted during the execution of a previous contract (NAS8-36955/0039) firmly established the feasibility of developing a tool to aid decision makers in predicting the potential success of proposed projects. The final report from that investigation contains an outline of the method to be applied in developing this Project Success Predictor Model. As a follow-on to the previous study, this report describes in detail the development of this model and includes full explanation of the data-gathering techniques used to poll expert opinion. The report includes the presentation of the model code itself.

Keys to Successful Diabetes Self-Management for Uninsured Patients: Social Support, Observational Learning, and Turning Points A Safety Net Providers’ Strategic Alliance Study

PubMed Central

Hanahan, Melissa A.; Werner, James J.; Tomsik, Phillip; Weirich, Stephen A.; Reichsman, Ann; Navracruz, Lisa; Clemons-Clark, Terri; Cella, Peggi; Terchek, Joshua; Munson, Michelle R.

2015-01-01

Objective To determine how medically uninsured patients with limited material resources successfully manage diabetes. Methods Clinicians at 5 safety net practices enrolled uninsured adult patients (N=26) with prior diagnosis of diabetes for 6 months or longer. Patients were interviewed about enabling factors, motivations, resources, and barriers. Chart reviews and clinician surveys supplemented interview data. Interview, survey, and chart review data were analyzed and findings were summarized. Results Two distinct groups of patients were investigated: 1) “successful,” defined as those with an HbA1c of ≤7% or a recent improvement of at least 2% (n=17); and 2) “unsuccessful,” defined as patients with HbA1c of ≥9% (n=9) without recent improvement. In comparison to unsuccessful patients, successful patients more often reported having friends or family with diabetes, sought information about the disease, used evidence-based self-management strategies, held an accurate perception of their own disease control, and experienced “turning point” events that motivated increased efforts in disease management. Conclusions Uninsured safety net patients who successfully managed diabetes learned from friends and family with diabetes and leveraged disease-related events into motivational turning points. It may be beneficial for clinicians to incorporate social learning and motivational enhancement into diabetes interventions to increase patients’ motivation for improved levels of self-management. PMID:21671529

Principles of adoption of the successful environmental practices used in developed countries into mining industry in developing countries.

NASA Astrophysics Data System (ADS)

Masaitis, Alexandra

2013-04-01

presence of the audit and monitoring that do not address the local conditions of the mining operations. Based on the above the following concepts were thought of to improve the environmental conditions in mining sector: 1. Was developed the Regional Environmental Management principle based on the local conditions such as physiographic region, local population, and socioeconomic conditions of the area; 2. Devised were criteria for the risk assessment for developing countries. Where the fundamental principals were public health, both near and far from the operation, environmental and biodiversity impact, waste management, long- and short- term rehabilitation plans, compliance with international standards and norms. 3. Developed was the mechanism of the economic motivation to make mining operations "environmentally friendly" that includes defrayal of expenses from both direct and indirect damages. 4. Identified were spheres of possible cooperation between mining companies, government organizations, and the NGOs. These include development of international standards for Good Neighbor Agreement, exchange of environmental information, exchange of successful environmental, health, and safety practices between mining operations from developed and developing countries. The study showed the dire necessity for the mining industry that operates in developing countries to adopt the successful environmental practices used in developed countries. To achieve this goal the Regional Environmental Management principle, the risk assessment criteria, the mechanism of the economic motivation and the principles for international cooperation can play an extremely important role.

Development of instruction in hospital electrical safety for medical education.

PubMed

Yoo, J H; Broderick, W A

1978-01-01

Although hospital electrical safety is receiving increased attention in the literature of engineers, it is not, at present, reflected in the curricula of medical schools. A possible reason for this omission is that biomedical and/or clinical engineers knowledgeable in electrical safety are not usually trained to teach. One remedy for this problem is to combine the knowledge of engineers with that of instructional developers to design a systematic curriculum for a course in hospital electrical safety. This paper describes such an effort at the University of Texas Health Science Center at San Antonio (UTHSCSA). A biomedical engineer and an instructional developer designed an instructional module in hospital electrical safety; the engineer taught the module, and both evaluated the results. The process and outcome of their collaboration are described. This model was effectively applied in the classroom as a four-hour segment in hospital electrical safety for first-year medical students at UTHSCSA. It is hoped that an additional benefit of this system will be that it offers an opportunity for continuing improvement in this kind of instruction at other medical schools and hospitals.

Developing a theoretical model and questionnaire survey instrument to measure the success of electronic health records in residential aged care

PubMed Central

Yu, Ping; Qian, Siyu

2018-01-01

Electronic health records (EHR) are introduced into healthcare organizations worldwide to improve patient safety, healthcare quality and efficiency. A rigorous evaluation of this technology is important to reduce potential negative effects on patient and staff, to provide decision makers with accurate information for system improvement and to ensure return on investment. Therefore, this study develops a theoretical model and questionnaire survey instrument to assess the success of organizational EHR in routine use from the viewpoint of nursing staff in residential aged care homes. The proposed research model incorporates six variables in the reformulated DeLone and McLean information systems success model: system quality, information quality, service quality, use, user satisfaction and net benefits. Two variables training and self-efficacy were also incorporated into the model. A questionnaire survey instrument was designed to measure the eight variables in the model. After a pilot test, the measurement scale was used to collect data from 243 nursing staff members in 10 residential aged care homes belonging to three management groups in Australia. Partial least squares path modeling was conducted to validate the model. The validated EHR systems success model predicts the impact of the four antecedent variables—training, self-efficacy, system quality and information quality—on the net benefits, the indicator of EHR systems success, through the intermittent variables use and user satisfaction. A 24-item measurement scale was developed to quantitatively evaluate the performance of an EHR system. The parsimonious EHR systems success model and the measurement scale can be used to benchmark EHR systems success across organizations and units and over time. PMID:29315323

Safety Verification of a Fault Tolerant Reconfigurable Autonomous Goal-Based Robotic Control System

NASA Technical Reports Server (NTRS)

Braman, Julia M. B.; Murray, Richard M; Wagner, David A.

2007-01-01

Fault tolerance and safety verification of control systems are essential for the success of autonomous robotic systems. A control architecture called Mission Data System (MDS), developed at the Jet Propulsion Laboratory, takes a goal-based control approach. In this paper, a method for converting goal network control programs into linear hybrid systems is developed. The linear hybrid system can then be verified for safety in the presence of failures using existing symbolic model checkers. An example task is simulated in MDS and successfully verified using HyTech, a symbolic model checking software for linear hybrid systems.

Transit safety retrofit package development : applications requirements document.

DOT National Transportation Integrated Search

2014-05-01

This Application Requirements Document for the Transit Safety Retrofit Package (TRP) Development captures the system, hardware and software requirements towards fulfilling the technical objectives stated within the contract. To achieve the objective ...

Development of a British Road Safety Education Support Materials Curriculum.

ERIC Educational Resources Information Center

Bouck, Linda H.

Road safety education needs to be a vital component in the school curriculum. This paper describes a planned road safety education support materials curriculum developed to aid educators in the Wiltshire County (England) primary schools. Teaching strategies include topic webs, lecture, class discussion, group activities, and investigative learning…

Developing a dimensional model for successful cognitive and emotional aging.

PubMed

Vahia, Ipsit V; Thompson, Wesley K; Depp, Colin A; Allison, Matthew; Jeste, Dilip V

2012-04-01

There is currently a lack of consensus on the definition of successful aging (SA) and existing implementations have omitted constructs associated with SA. We used empirical methods to develop a dimensional model of SA that incorporates a wider range of associated variables, and we examined the relationship among these components using factor analysis and Bayesian Belief Nets. We administered a successful aging questionnaire comprising several standardized measures related to SA to a sample of 1948 older women enrolled in the San Diego site of the Women's Health Initiative study. The SA-related variables we included in the model were self-rated successful aging, depression severity, physical and emotional functioning, optimism, resilience, attitude towards own aging, self-efficacy, and cognitive ability. After adjusting for age, education and income, we fitted an exploratory factor analysis model to the SA-related variables and then, in order to address relationships among these factors, we computed a Bayesian Belief Net (BBN) using rotated factor scores. The SA-related variables loaded onto five factors. Based on the loading, we labeled the factors as follows: self-rated successful aging, cognition, psychosocial protective factors, physical functioning, and emotional functioning. In the BBN, self-rated successful aging emerged as the primary downstream factor and exhibited significant partial correlations with psychosocial protective factors, physical/general status and mental/emotional status but not with cognitive ability. Our study represents a step forward in developing a dimensional model of SA. Our findings also point to a potential role for psychiatry in improving successful aging by managing depressive symptoms and developing psychosocial interventions to improve self-efficacy, resilience, and optimism.

A root cause analysis project in a medication safety course.

PubMed

Schafer, Jason J

2012-08-10

To develop, implement, and evaluate team-based root cause analysis projects as part of a required medication safety course for second-year pharmacy students. Lectures, in-class activities, and out-of-class reading assignments were used to develop students' medication safety skills and introduce them to the culture of medication safety. Students applied these skills within teams by evaluating cases of medication errors using root cause analyses. Teams also developed error prevention strategies and formally presented their findings. Student performance was assessed using a medication errors evaluation rubric. Of the 211 students who completed the course, the majority performed well on root cause analysis assignments and rated them favorably on course evaluations. Medication error evaluation and prevention was successfully introduced in a medication safety course using team-based root cause analysis projects.

Modeling the Relationship between Safety Climate and Safety Performance in a Developing Construction Industry: A Cross-Cultural Validation Study

PubMed Central

Zahoor, Hafiz; Chan, Albert P. C.; Utama, Wahyudi P.; Gao, Ran; Zafar, Irfan

2017-01-01

This study attempts to validate a safety performance (SP) measurement model in the cross-cultural setting of a developing country. In addition, it highlights the variations in investigating the relationship between safety climate (SC) factors and SP indicators. The data were collected from forty under-construction multi-storey building projects in Pakistan. Based on the results of exploratory factor analysis, a SP measurement model was hypothesized. It was tested and validated by conducting confirmatory factor analysis on calibration and validation sub-samples respectively. The study confirmed the significant positive impact of SC on safety compliance and safety participation, and negative impact on number of self-reported accidents/injuries. However, number of near-misses could not be retained in the final SP model because it attained a lower standardized path coefficient value. Moreover, instead of safety participation, safety compliance established a stronger impact on SP. The study uncovered safety enforcement and promotion as a novel SC factor, whereas safety rules and work practices was identified as the most neglected factor. The study contributed to the body of knowledge by unveiling the deviations in existing dimensions of SC and SP. The refined model is expected to concisely measure the SP in the Pakistani construction industry, however, caution must be exercised while generalizing the study results to other developing countries. PMID:28350366

Modeling the Relationship between Safety Climate and Safety Performance in a Developing Construction Industry: A Cross-Cultural Validation Study.

PubMed

Zahoor, Hafiz; Chan, Albert P C; Utama, Wahyudi P; Gao, Ran; Zafar, Irfan

2017-03-28

This study attempts to validate a safety performance (SP) measurement model in the cross-cultural setting of a developing country. In addition, it highlights the variations in investigating the relationship between safety climate (SC) factors and SP indicators. The data were collected from forty under-construction multi-storey building projects in Pakistan. Based on the results of exploratory factor analysis, a SP measurement model was hypothesized. It was tested and validated by conducting confirmatory factor analysis on calibration and validation sub-samples respectively. The study confirmed the significant positive impact of SC on safety compliance and safety participation , and negative impact on number of self-reported accidents/injuries . However, number of near-misses could not be retained in the final SP model because it attained a lower standardized path coefficient value. Moreover, instead of safety participation , safety compliance established a stronger impact on SP. The study uncovered safety enforcement and promotion as a novel SC factor, whereas safety rules and work practices was identified as the most neglected factor. The study contributed to the body of knowledge by unveiling the deviations in existing dimensions of SC and SP. The refined model is expected to concisely measure the SP in the Pakistani construction industry, however, caution must be exercised while generalizing the study results to other developing countries.

Extending Safety Culture Development through Communication - 12366

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sneve, M.K.; Kiselev, M.; Shandala, N.K.

2012-07-01

The Norwegian Radiation Protection Authority has been implementing a regulatory support program in the Russian Federation for over 10 years, as part of the Norwegian government's Plan of Action for enhancing nuclear and radiation safety in northwest Russia. The overall long-term objective is the enhancement of safety culture. The project outputs have included appropriate regulatory threat assessments, to determine the hazardous activities which are most in need of enhanced regulatory supervision; and development of the norms, standards and regulatory procedures, necessary to address the often abnormal conditions at nuclear legacy sites. Project outputs have been prepared and subsequently confirmed asmore » official regulatory documents of the Russian Federation. The continuing program of work focuses on practical application of the enhanced regulatory framework as applied to legacy sites, including safe management of radioactive wastes arising in the process of site remediation. One of the lessons learnt from this practical application is the importance of effective communication at all levels: - between managers and shop workers; - between different operators - e.g. waste producers and waste disposal organisations; - between operators and regulators; - between nuclear safety regulators, radiation protection regulators and other pollution and safety regulators; - between scientists, policy makers and wider stakeholders; and - between all of those mentioned above. A key message from this work is that it is not just an issue of risk communication; rather all aspects of communication can contribute to safety culture enhancement to support effective and efficient risk management, including the role of regulatory supervision. (authors)« less

Challenges in Developing Competency-based Training Curriculum for Food Safety Regulators in India

PubMed Central

Thippaiah, Anitha; Allagh, Komal Preet; Murthy, G. V.

2014-01-01

Context: The Food Safety and Standards Act have redefined the roles and responsibilities of food regulatory workforce and calls for highly skilled human resources as it involves complex management procedures. Aims: 1) Identify the competencies needed among the food regulatory workforce in India. 2) Develop a competency-based training curriculum for food safety regulators in the country. 3) Develop training materials for use to train the food regulatory workforce. Settings and Design: The Indian Institute of Public Health, Hyderabad, led the development of training curriculum on food safety with technical assistance from the Royal Society for Public Health, UK and the National Institute of Nutrition, India. The exercise was to facilitate the implementation of new Act by undertaking capacity building through a comprehensive training program. Materials and Methods: A competency-based training needs assessment was conducted before undertaking the development of the training materials. Results: The training program for Food Safety Officers was designed to comprise of five modules to include: Food science and technology, Food safety management systems, Food safety legislation, Enforcement of food safety regulations, and Administrative functions. Each module has a facilitator guide for the tutor and a handbook for the participant. Essentials of Food Hygiene-I (Basic level), II and III (Retail/ Catering/ Manufacturing) were primarily designed for training of food handlers and are part of essential reading for food safety regulators. Conclusion: The Food Safety and Standards Act calls for highly skilled human resources as it involves complex management procedures. Despite having developed a comprehensive competency-based training curriculum by joint efforts by the local, national, and international agencies, implementation remains a challenge in resource-limited setting. PMID:25136155

Workforce Perceptions of Hospital Safety Culture: Development and Validation of the Patient Safety Climate in Healthcare Organizations Survey

PubMed Central

Singer, Sara; Meterko, Mark; Baker, Laurence; Gaba, David; Falwell, Alyson; Rosen, Amy

2007-01-01

Objective To describe the development of an instrument for assessing workforce perceptions of hospital safety culture and to assess its reliability and validity. Data Sources/Study Setting Primary data collected between March 2004 and May 2005. Personnel from 105 U.S. hospitals completed a 38-item paper and pencil survey. We received 21,496 completed questionnaires, representing a 51 percent response rate. Study Design Based on review of existing safety climate surveys, we developed a list of key topics pertinent to maintaining a culture of safety in high-reliability organizations. We developed a draft questionnaire to address these topics and pilot tested it in four preliminary studies of hospital personnel. We modified the questionnaire based on experience and respondent feedback, and distributed the revised version to 42,249 hospital workers. Data Collection We randomly divided respondents into derivation and validation samples. We applied exploratory factor analysis to responses in the derivation sample. We used those results to create scales in the validation sample, which we subjected to multitrait analysis (MTA). Principal Findings We identified nine constructs, three organizational factors, two unit factors, three individual factors, and one additional factor. Constructs demonstrated substantial convergent and discriminant validity in the MTA. Cronbach's α coefficients ranged from 0.50 to 0.89. Conclusions It is possible to measure key salient features of hospital safety climate using a valid and reliable 38-item survey and appropriate hospital sample sizes. This instrument may be used in further studies to better understand the impact of safety climate on patient safety outcomes. PMID:17850530

Developing an educational safety program for pharmacy employees.

PubMed

Hayman, J N

1980-02-01

The need for developing educational safety programs for pharmacy employees is discussed. A three-part program is offered as a guide for structuring a departmental safety program. Part I deals with environmental hazards such as wet floors, poor lighting, and cluttered walk areas. Precautions that should be taken to avoid accidental exposure to patients with communicable diseases are also included. Hazards that may result from improper handling of materials or equipment are addressed in Part II. Included are precautions for handling chemicals, needles, ladders, and electrical equipment. Proper methods of lifting heavy objects are also discussed. Part III details plans to protect staff members in the event of a fire. Plans for reporting fires and evacuating the pharmacy and hospital are discussed. The outlined program requires self-study by staff members during initial employee orientation, followed by annual retraining. Employees are tested and graded on safety topics, and training records are filed for future reference. The program outlined is thought to offer a simple yet effective means of acquainting staff members with established institutional and departmental safety procedures.

Development of a Medication Safety and Quality Survey for Small Rural Hospitals.

PubMed

Winterstein, Almut G; Johns, Thomas E; Campbell, Kyle N; Libby, Joel; Pannell, Bob

2017-12-01

We summarize the development and initial implementation of a survey tool to assess medication safety in small rural hospitals. As part of an ongoing rural hospital medication safety improvement program, we developed a survey tool in all 13 critical access hospitals (CAHs) in Florida. The survey was compiled from existing medication safety assessments and standards, clinical practice guidelines, and published literature. Survey items were selected based on considerations regarding practicality and relevance to the CAH setting.The final survey instrument included 134 items representing 17 medication safety domains. Overall hospital scores ranged from 41% to 95%, with a median of 59%. Most hospitals showed large variation in scores across domains, with 5 hospitals having at least 1 domain with scores less than 10%. Highest scores across all facilities were seen for safety procedures concerning high-alert or look-alike medications and the assembly of emergency carts. The lowest median scores included availability and consistent use of standardized order sets and the effective implementation of medication safety committees. Most hospitals used the survey results to identify and prioritize quality improvement activities. The survey can be used to conduct a short medication safety assessment specific to a limited number of areas and services in CAHs. It showed good ability to discriminate medication safety levels across participating sites and highlighted opportunities for improvement. It may need modification if case mix or services differ in other states or if the status quo of medication safety in CAHs or related standards advance. The described process of survey development might be helpful to support such modifications.

Development of E-Learning Materials for Machining Safety Education

NASA Astrophysics Data System (ADS)

Nakazawa, Tsuyoshi; Mita, Sumiyoshi; Matsubara, Masaaki; Takashima, Takeo; Tanaka, Koichi; Izawa, Satoru; Kawamura, Takashi

We developed two e-learning materials for Manufacturing Practice safety education: movie learning materials and hazard-detection learning materials. Using these video and sound media, students can learn how to operate machines safely with movie learning materials, which raise the effectiveness of preparation and review for manufacturing practice. Using these materials, students can realize safety operation well. Students can apply knowledge learned in lectures to the detection of hazards and use study methods for hazard detection during machine operation using the hazard-detection learning materials. Particularly, the hazard-detection learning materials raise students‧ safety consciousness and increase students‧ comprehension of knowledge from lectures and comprehension of operations during Manufacturing Practice.

Medical volunteers: guidelines for success and safety.

PubMed Central

Hoover, Eddie L.; Cole-Hoover, Gwendolyn; Berry, Paula K.; Hoover, Evan T.; Harris, Betsy; Rageh, Deman; Weaver, W. Lynn

2005-01-01

Many African Americans from a variety of medical specialties are interested in satisfying a life-long dream of visiting Africa by volunteering their services to faith-based and private volunteer organizations doing missionary work on the continent. While this can be an extremely rewarding experience in which measurable good can be accomplished, this path can also be strewn with many obstacles that will affect both the success of the mission and the personal well-being of the volunteer. The American Medical Team for Africa is a nonprofit, tax-exempt, volunteer organization that has been doing medical missionary work in Africa since 1993. This manuscript is a compilation of this 10-year experience that has established some very useful guidelines for insuring a successful and safe mission if you are fortunate enough to have this opportunity. PMID:15719877

Measuring cross-cultural patient safety: identifying barriers and developing performance indicators.

PubMed

Walker, Roger; St Pierre-Hansen, Natalie; Cromarty, Helen; Kelly, Len; Minty, Bryanne

2010-01-01

Medical errors and cultural errors threaten patient safety. We know that access to care, quality of care and clinical safety are all impacted by cultural issues. Numerous approaches to describing cultural barriers to patient safety have been developed, but these taxonomies do not provide a useful set of tools for defining the nature of the problem and consequently do not establish a sound base for problem solving. The Sioux Lookout Meno Ya Win Health Centre has implemented a cross-cultural patient safety (CCPS) model (Walker 2009). We developed an analytical CCPS framework within the organization, and in this article, we detail the validation process for our framework by way of a literature review and surveys of local and international healthcare professionals. We reinforce the position that while cultural competency may be defined by the service provider, cultural safety is defined by the client. In addition, we document the difficulties surrounding the measurement of cultural competence in terms of patient outcomes, which is an underdeveloped dimension of the field of patient safety. We continue to explore the correlation between organizational performance and measurable patient outcomes.

Patient involvement in patient safety: Protocol for developing an intervention using patient reports of organisational safety and patient incident reporting.

PubMed

Ward, Jane K; McEachan, Rosemary R C; Lawton, Rebecca; Armitage, Gerry; Watt, Ian; Wright, John

2011-05-27

Patients have the potential to provide a rich source of information on both organisational aspects of safety and patient safety incidents. This project aims to develop two patient safety interventions to promote organisational learning about safety - a patient measure of organisational safety (PMOS), and a patient incident reporting tool (PIRT) - to help the NHS prevent patient safety incidents by learning more about when and why they occur. To develop the PMOS 1) literature will be reviewed to identify similar measures and key contributory factors to error; 2) four patient focus groups will ascertain practicality and feasibility; 3) 25 patient interviews will elicit approximately 60 items across 10 domains; 4) 10 patient and clinician interviews will test acceptability and understanding. Qualitative data will be analysed using thematic content analysis.To develop the PIRT 1) individual and then combined patient and clinician focus groups will provide guidance for the development of three potential reporting tools; 2) nine wards across three hospital directorates will pilot each of the tools for three months. The best performing tool will be identified from the frequency, volume and quality of reports. The validity of both measures will be tested. 300 patients will be asked to complete the PMOS and PIRT during their stay in hospital. A sub-sample (N = 50) will complete the PMOS again one week later. Health professionals in participating wards will also be asked to complete the AHRQ safety culture questionnaire. Case notes for all patients will be reviewed. The psychometric properties of the PMOS will be assessed and a final valid and reliable version developed. Concurrent validity for the PIRT will be assessed by comparing reported incidents with those identified from case note review and the existing staff reporting scheme. In a subsequent study these tools will be used to provide information to wards/units about their priorities for patient safety. A patient

Supervisor Health and Safety Support: Scale Development and Validation

PubMed Central

Butts, Marcus M.; Hurst, Carrie S.; Eby, Lillian T.

2013-01-01

Executive Summary Two studies were conducted to develop a psychometrically sound measure of supervisor health and safety support (SHSS). We identified three dimensions of supervisor support (physical health, psychological health, safety) and used Study 1 to develop items and establish content validity. Study 2 was used to establish the dimensionality of the new measure and provide criterion-related and discriminant validity evidence of the measure using supervisor and subordinate data. The measure had incremental validity in predicting employee performance and psychological strain outcomes above and beyond general work support variables. Implications of these findings and for workplace support theory and practice are discussed. PMID:24771991

The patient safety climate in healthcare organizations (PSCHO) survey: Short-form development.

PubMed

Benzer, Justin K; Meterko, Mark; Singer, Sara J

2017-08-01

Measures of safety climate are increasingly used to guide safety improvement initiatives. However, cost and respondent burden may limit the use of safety climate surveys. The purpose of this study was to develop a 15- to 20-item safety climate survey based on the Patient Safety Climate in Healthcare Organizations survey, a well-validated 38-item measure of safety climate. The Patient Safety Climate in Healthcare Organizations was administered to all senior managers, all physicians, and a 10% random sample of all other hospital personnel in 69 private sector hospitals and 30 Veterans Health Administration hospitals. Both samples were randomly divided into a derivation sample to identify a short-form subset and a confirmation sample to assess the psychometric properties of the proposed short form. The short form consists of 15 items represented 3 overarching domains in the long-form scale-organization, work unit, and interpersonal. The proposed short form efficiently captures 3 important sources of variance in safety climate: organizational, work-unit, and interpersonal. The short-form development process was a practical method that can be applied to other safety climate surveys. This safety climate short form may increase response rates in studies that involve busy clinicians or repeated measures. Published 2017. This article is a U.S. Government work and is in the public domain in the USA.

Investigation of safety analysis methods using computer vision techniques

NASA Astrophysics Data System (ADS)

Shirazi, Mohammad Shokrolah; Morris, Brendan Tran

2017-09-01

This work investigates safety analysis methods using computer vision techniques. The vision-based tracking system is developed to provide the trajectory of road users including vehicles and pedestrians. Safety analysis methods are developed to estimate time to collision (TTC) and postencroachment time (PET) that are two important safety measurements. Corresponding algorithms are presented and their advantages and drawbacks are shown through their success in capturing the conflict events in real time. The performance of the tracking system is evaluated first, and probability density estimation of TTC and PET are shown for 1-h monitoring of a Las Vegas intersection. Finally, an idea of an intersection safety map is introduced, and TTC values of two different intersections are estimated for 1 day from 8:00 a.m. to 6:00 p.m.

Training for an effective health and safety committee in a small business setting.

PubMed

Crollard, Allison; Neitzel, Richard L; Dominguez, Carlos F; Seixas, Noah S

2013-01-01

Health and safety committees are often heralded as a key element of successful health and safety programs, and are thought to represent a means of engaging workers in health and safety efforts. While the understanding of the factors that make these committees effective is growing, there are few resources for how to assist committees in developing these characteristics. This paper describes one approach to creating and implementing a training intervention aimed at improving health and safety committee function at one multilingual worksite. Short-term impacts were evaluated via questionnaire and qualitative observations of committee function. Results indicated high satisfaction with the training as well as modest increases in participation, cooperation, role clarity, and comfort with health and safety skills among committee members. The committee also made considerable achievements in establishing new processes for effective function. Similar interventions may be useful in other workplaces to increase health and safety committee success.

Safety and Security Interface Technology Initiative

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dr. Michael A. Lehto; Kevin J. Carroll; Dr. Robert Lowrie

/Security Documentation Integration, Configuration Control, and development of a shared ‘tool box’ of information/successes. Specific Benefits. The expectation or end state resulting from the topical report and associated implementation plan includes: (1) A recommended process for handling the documentation of the security and safety disciplines, including an appropriate change control process and participation by all stakeholders. (2) A means to package security systems with sufficient information to help expedite the flow of that system through the process. In addition, a means to share successes among sites, to include information and safety basis to the extent such information is transportable. (3) Identification of key security systems and associated essential security elements being installed and an arrangement for the sites installing these systems to host an appropriate team to review a specific system and determine what information is exportable. (4) Identification of the security systems’ essential elements and appropriate controls required for testing of these essential elements in the facility. (5) The ability to help refine and improve an agreed to control set at the manufacture stage.« less

Competency Development and Career Success: The Mediating Role of Employability

ERIC Educational Resources Information Center

De Vos, Ans; De Hauw, Sara; Van der Heijden, Beatrice I. J. M.

2011-01-01

The present study aims to unravel the relationship between competency development, employability and career success. To do so, we tested a model wherein associations between employee participation in competency development initiatives, perceived support for competency development, self-perceived employability, and two indicators of subjective…

Development and Evaluation of a Success Index for Professionals in Postgraduate Training Programs

DTIC Science & Technology

1993-02-26

15 Predicting Success among Program Participants .... ......... .. 16 AEGD Success and Career Success .......... ................ .. 16...10), and general career success (8). Hough applied the principle of behavioral consistency and aspects of the biographical inventory to develop and...the opportunity to evaluate how measures of success in AEGD translate into career success . The 90 AERs were reviewed by two experienced senior dental

The development and psychometric evaluation of a safety climate measure for primary care.

PubMed

de Wet, C; Spence, W; Mash, R; Johnson, P; Bowie, P

2010-12-01

Building a safety culture is an important part of improving patient care. Measuring perceptions of safety climate among healthcare teams and organisations is a key element of this process. Existing measurement instruments are largely developed for secondary care settings in North America and many lack adequate psychometric testing. Our aim was to develop and test an instrument to measure perceptions of safety climate among primary care teams in National Health Service for Scotland. Questionnaire development was facilitated through a steering group, literature review, semistructured interviews with primary care team members, a modified Delphi and completion of a content validity index by experts. A cross-sectional postal survey utilising the questionnaire was undertaken in a random sample of west of Scotland general practices to facilitate psychometric evaluation. Statistical methods, including exploratory and confirmatory factor analysis, and Cronbach and Raykov reliability coefficients were conducted. Of the 667 primary care team members based in 49 general practices surveyed, 563 returned completed questionnaires (84.4%). Psychometric evaluation resulted in the development of a 30-item questionnaire with five safety climate factors: leadership, teamwork, communication, workload and safety systems. Retained items have strong factor loadings to only one factor. Reliability coefficients was satisfactory (α = 0.94 and ρ = 0.93). This study is the first stage in the development of an appropriately valid and reliable safety climate measure for primary care. Measuring safety climate perceptions has the potential to help primary care organisations and teams focus attention on safety-related issues and target improvement through educational interventions. Further research is required to explore acceptability and feasibility issues for primary care teams and the potential for organisational benchmarking.

Advancing a sociotechnical systems approach to workplace safety – developing the conceptual framework

PubMed Central

Carayon, Pascale; Hancock, Peter; Leveson, Nancy; Noy, Ian; Sznelwar, Laerte; van Hootegem, Geert

2015-01-01

Traditional efforts to deal with the enormous problem of workplace safety have proved insufficient, as they have tended to neglect the broader sociotechnical environment that surrounds workers. Here, we advocate a sociotechnical systems approach that describes the complex multi-level system factors that contribute to workplace safety. From the literature on sociotechnical systems, complex systems and safety, we develop a sociotechnical model of workplace safety with concentric layers of the work system, socio-organisational context and the external environment. The future challenges that are identified through the model are highlighted. Practitioner Summary: Understanding the environmental, organisational and work system factors that contribute to workplace safety will help to develop more effective and integrated solutions to deal with persistent workplace safety problems. Solutions to improve workplace safety need to recognise the broad sociotechnical system and the respective interactions between the system elements and levels. PMID:25831959

Child Development Associate. Safety for Young Children.

ERIC Educational Resources Information Center

Oscar Rose Junior Coll., Midwest City, OK.

This Child Development Associate (CDA) training module, one of a series of 18, provides a guide to establishing a safe and healthy preschool environment and promoting health and safety practices among preschool children. Upon completion of the module, CDA trainees are expected to be able to create a safe learning environment for children,…

The business case for patient safety.

PubMed

Hwang, Raymond W; Herndon, James H

2007-04-01

Recent trends have focused attention on improving patient safety in the United States healthcare system. Lapses in patient safety create undue, often preventable, morbidity. These include adverse drug events, adverse surgical events and nosocomial infections. From an organizational perspective, these events are both inefficient and expensive. Many safe practices and quality enhancing improvements, such as computer provider order entry, proper infection surveillance, telemedicine intensive care, and registered nurse staffing are in fact cost-effective. However, in order to fully achieve higher quality, better adverse event reporting and a culture of safety must first be developed. Increased provider recognition, models of success, public awareness and consumer demand are propelling improvements. As we will outline in this review of the current literature, the business case for patient safety is a compelling one, offering substantial economic incentives for achieving the necessary goal of improved patient outcomes.

DEVELOPMENT OF ADME DATA IN AGRICULTURAL CHEMICAL SAFETY ASSESSMENTS

EPA Science Inventory

DEVELOPMENT OF ADME DATA IN AGRICULTURAL CHEMICAL SAFETY ASSESSMENTS
Pastoor, Timothy1, Barton, Hugh2
1 Syngenta Crop Protection, Greensboro, NC, USA.
2 EPA, Office of Research and Development-NHEERL, RTP, NC, USA.

A multi-stakeholder series of discussions d...

The Environmental Health/Home Safety Education Project: a successful and practical U.S.-Mexico border initiative.

PubMed

Forster-Cox, Susan C; Mangadu, Thenral; Jacquez, Benjamín; Fullerton, Lynne

2010-05-01

The Environmental Health/Home Safety Education Project (Proyecto de Salud Ambiental y Seguridad en el Hogar) has been developed in response to a wide array of severe and often preventable environmental health issues occurring in and around homes on the U.S.-Mexico border. Utilizing well-trained community members, called promotoras , homes are visited and assessed for potential environmental hazards, including home fire and food safety issues. Data analyzed from project years 2002 to 2005 shows a significant impact in knowledge levels and initial behavior change among targeted participants as it relates to fire and food safety issues. Since the initiation of the project in 1999, hundreds of participants have improved their quality of life by making their homes safer. The project has proven to be sustainable, replicable, flexible, and attractive to funders.

User-Centered Collaborative Design and Development of an Inpatient Safety Dashboard.

PubMed

Mlaver, Eli; Schnipper, Jeffrey L; Boxer, Robert B; Breuer, Dominic J; Gershanik, Esteban F; Dykes, Patricia C; Massaro, Anthony F; Benneyan, James; Bates, David W; Lehmann, Lisa S

2017-12-01

Patient safety remains a key concern in hospital care. This article summarizes the iterative participatory development, features, functions, and preliminary evaluation of a patient safety dashboard for interdisciplinary rounding teams on inpatient medical services. This electronic health record (EHR)-embedded dashboard collects real-time data covering 13 safety domains through web services and applies logic to generate stratified alerts with an interactive check-box function. The technological infrastructure is adaptable to other EHR environments. Surveyed users perceived the tool as highly usable and useful. Integration of the dashboard into clinical care is intended to promote communication about patient safety and facilitate identification and management of safety concerns. Copyright © 2017 The Joint Commission. All rights reserved.

The development and evaluation of a succession planning programme in nursing, in Australia.

PubMed

Brunero, Scott; Kerr, Suzie; Jastrzab, Grazyna

2009-07-01

This study reports on a locally organized model of succession planning in a 550-bed general hospital. Within healthcare, succession planning has traditionally been considered for people at the executive director level and little research has been published with nurses working at the clinical level. A succession planning model was developed from the literature and through a process of consultation with senior staff. The model was then evaluated from a customer satisfaction, programme progress, effective placement and organizational results perspectives. Nurses who were successful in obtaining a new role were surveyed after 6 weeks in the position. Descriptive statistics, including numbers of placements and types of positions filled, were recorded. A checklist for conducting a programme evaluation of succession planning was also used. Twenty-five nurses participated, with 31 positions succeeded to. Nurses reported positively that the programme was beneficial, increased their sense of career planning and gave them a greater understanding of their career pathway. The succession planning programme provided an opportunity for the organization to identify new leaders. The study outcomes have identified potential improvements to the way succession planning is conducted at the hospital. Nurse Managers are in key positions to develop effective succession planning models. This study offers a process for managers to develop effective succession planning programmes within their organization.

Guiding principles for successful innovation in regional medical education development.

PubMed

Hays, Richard B

2006-01-01

This is an era of extraordinary expansion in medical education in both the developed and developing world. This article reflects on the author's experience in implementing new regional medical education programs, and distils ten principles to guide successful innovation once funding for such development has been achieved.

Developing and Testing the Health Care Safety Hotline: A Prototype Consumer Reporting System for Patient Safety Events.

PubMed

Schneider, Eric C; Ridgely, M Susan; Quigley, Denise D; Hunter, Lauren E; Leuschner, Kristin J; Weingart, Saul N; Weissman, Joel S; Zimmer, Karen P; Giannini, Robert C

2017-06-01

This article describes the design, development, and testing of the Health Care Safety Hotline, a prototype consumer reporting system for patient safety events. The prototype was designed and developed with ongoing review by a technical expert panel and feedback obtained during a public comment period. Two health care delivery organizations in one metropolitan area collaborated with the researchers to demonstrate and evaluate the system. The prototype was deployed and elicited information from patients, family members, and caregivers through a website or an 800 phone number. The reports were considered useful and had little overlap with information received by the health care organizations through their usual risk management, customer service, and patient safety monitoring systems. However, the frequency of reporting was lower than anticipated, suggesting that further refinements, including efforts to raise awareness by actively soliciting reports from subjects, might be necessary to substantially increase the volume of useful reports. It is possible that a single technology platform could be built to meet a variety of different patient safety objectives, but it may not be possible to achieve several objectives simultaneously through a single consumer reporting system while also establishing trust with patients, caregivers, and providers.

Development of a software safety process and a case study of its use

NASA Technical Reports Server (NTRS)

Knight, John C.

1993-01-01

The goal of this research is to continue the development of a comprehensive approach to software safety and to evaluate the approach with a case study. The case study is a major part of the project, and it involves the analysis of a specific safety-critical system from the medical equipment domain. The particular application being used was selected because of the availability of a suitable candidate system. We consider the results to be generally applicable and in no way particularly limited by the domain. The research is concentrating on issues raised by the specification and verification phases of the software lifecycle since they are central to our previously-developed rigorous definitions of software safety. The theoretical research is based on our framework of definitions for software safety. In the area of specification, the main topics being investigated are the development of techniques for building system fault trees that correctly incorporate software issues and the development of rigorous techniques for the preparation of software safety specifications. The research results are documented. Another area of theoretical investigation is the development of verification methods tailored to the characteristics of safety requirements. Verification of the correct implementation of the safety specification is central to the goal of establishing safe software. The empirical component of this research is focusing on a case study in order to provide detailed characterizations of the issues as they appear in practice, and to provide a testbed for the evaluation of various existing and new theoretical results, tools, and techniques. The Magnetic Stereotaxis System is summarized.

Multilevel Safety Climate and Safety Performance in the Construction Industry: Development and Validation of a Top-Down Mechanism

PubMed Central

Gao, Ran; Chan, Albert P.C.; Utama, Wahyudi P.; Zahoor, Hafiz

2016-01-01

The character of construction projects exposes front-line workers to dangers and accidents. Safety climate has been confirmed to be a predictor of safety performance in the construction industry. This study aims to explore the underlying mechanisms of the relationship between multilevel safety climate and safety performance. An integrated model was developed to study how particular safety climate factors of one level affect those of other levels, and then affect safety performance from the top down. A questionnaire survey was administered on six construction sites in Vietnam. A total of 1030 valid questionnaires were collected from this survey. Approximately half of the data were used to conduct exploratory factor analysis (EFA) and the remaining data were submitted to structural equation modeling (SEM). Top management commitment (TMC) and supervisors’ expectation (SE) were identified as factors to represent organizational safety climate (OSC) and supervisor safety climate (SSC), respectively, and coworkers’ caring and communication (CCC) and coworkers’ role models (CRM) were identified as factors to denote coworker safety climate (CSC). SEM results show that OSC factor is positively related to SSC factor and CSC factors significantly. SSC factor could partially mediate the relationship between OSC factor and CSC factors, as well as the relationship between OSC factor and safety performance. CSC factors partially mediate the relationship between OSC factor and safety performance, and the relationship between SSC factor and safety performance. The findings imply that a positive safety culture should be established both at the organizational level and the group level. Efforts from all top management, supervisors, and coworkers should be provided to improve safety performance in the construction industry. PMID:27834823

Multilevel Safety Climate and Safety Performance in the Construction Industry: Development and Validation of a Top-Down Mechanism.

PubMed

Gao, Ran; Chan, Albert P C; Utama, Wahyudi P; Zahoor, Hafiz

2016-11-08

The character of construction projects exposes front-line workers to dangers and accidents. Safety climate has been confirmed to be a predictor of safety performance in the construction industry. This study aims to explore the underlying mechanisms of the relationship between multilevel safety climate and safety performance. An integrated model was developed to study how particular safety climate factors of one level affect those of other levels, and then affect safety performance from the top down. A questionnaire survey was administered on six construction sites in Vietnam. A total of 1030 valid questionnaires were collected from this survey. Approximately half of the data were used to conduct exploratory factor analysis (EFA) and the remaining data were submitted to structural equation modeling (SEM). Top management commitment (TMC) and supervisors' expectation (SE) were identified as factors to represent organizational safety climate (OSC) and supervisor safety climate (SSC), respectively, and coworkers' caring and communication (CCC) and coworkers' role models (CRM) were identified as factors to denote coworker safety climate (CSC). SEM results show that OSC factor is positively related to SSC factor and CSC factors significantly. SSC factor could partially mediate the relationship between OSC factor and CSC factors, as well as the relationship between OSC factor and safety performance. CSC factors partially mediate the relationship between OSC factor and safety performance, and the relationship between SSC factor and safety performance. The findings imply that a positive safety culture should be established both at the organizational level and the group level. Efforts from all top management, supervisors, and coworkers should be provided to improve safety performance in the construction industry.

Development of safety performance monitoring procedures.

DOT National Transportation Integrated Search

2010-02-01

Highway safety is an ongoing concern to the Texas Department of Transportation (TxDOT). As part of its : proactive commitment to improving highway safety, TxDOT is moving toward including quantitative safety : analyses earlier in the project developm...

The Application of Software Safety to the Constellation Program Launch Control System

NASA Technical Reports Server (NTRS)

Kania, James; Hill, Janice

2011-01-01

The application of software safety practices on the LCS project resulted in the successful implementation of the NASA Software Safety Standard NASA-STD-8719.138 and CxP software safety requirements. The GOP-GEN-GSW-011 Hazard Report was the first report developed at KSC to identify software hazard causes and their controls. This approach can be applied to similar large software - intensive systems where loss of control can lead to a hazard.

Launching the dialogue: Safety and innovation as partners for success in advanced manufacturing.

PubMed

Geraci, C L; Tinkle, S S; Brenner, S A; Hodson, L L; Pomeroy-Carter, C A; Neu-Baker, N

2018-06-01

Emerging and novel technologies, materials, and information integrated into increasingly automated and networked manufacturing processes or into traditional manufacturing settings are enhancing the efficiency and productivity of manufacturing. Globally, there is a move toward a new era in manufacturing that is characterized by: (1) the ability to create and deliver more complex designs of products; (2) the creation and use of materials with new properties that meet a design need; (3) the employment of new technologies, such as additive and digital techniques that improve on conventional manufacturing processes; and (4) a compression of the time from initial design concept to the creation of a final product. Globally, this movement has many names, but "advanced manufacturing" has become the shorthand for this complex integration of material and technology elements that enable new ways to manufacture existing products, as well as new products emerging from new technologies and new design methods. As the breadth of activities associated with advanced manufacturing suggests, there is no single advanced manufacturing industry. Instead, aspects of advanced manufacturing can be identified across a diverse set of business sectors that use manufacturing technologies, ranging from the semiconductors and electronics to the automotive and pharmaceutical industries. The breadth and diversity of advanced manufacturing may change the occupational and environmental risk profile, challenge the basic elements of comprehensive health and safety (material, process, worker, environment, product, and general public health and safety), and provide an opportunity for development and dissemination of occupational and environmental health and safety (OEHS) guidance and best practices. It is unknown how much the risk profile of different elements of OEHS will change, thus requiring an evolution of health and safety practices. These changes may be accomplished most effectively through multi

Development of safety performance functions for North Carolina.

DOT National Transportation Integrated Search

2011-12-06

"The objective of this effort is to develop safety performance functions (SPFs) for different types of facilities in North Carolina : and illustrate how they can be used to improve the decision making process. The prediction models in Part C of the H...

Aerospace Safety Advisory Panel

NASA Technical Reports Server (NTRS)

1999-01-01

This report covers the activities of the Aerospace Safety Advisory Panel (ASAP) for calendar year 1998-a year of sharp contrasts and significant successes at NASA. The year opened with the announcement of large workforce cutbacks. The slip in the schedule for launching the International Space Station (ISS) created a 5-month hiatus in Space Shuttle launches. This slack period ended with the successful and highly publicized launch of the STS-95 mission. As the year closed, ISS assembly began with the successful orbiting and joining of the Functional Cargo Block (FGB), Zarya, from Russia and the Unity Node from the United States. Throughout the year, the Panel maintained its scrutiny of NASAs safety processes. Of particular interest were the potential effects on safety of workforce reductions and the continued transition of functions to the Space Flight Operations Contractor. Attention was also given to the risk management plans of the Aero-Space Technology programs, including the X-33, X-34, and X-38. Overall, the Panel concluded that safety is well served for the present. The picture is not as clear for the future. Cutbacks have limited the depth of talent available. In many cases, technical specialties are "one deep." The extended hiring freeze has resulted in an older workforce that will inevitably suffer significant departures from retirements in the near future. The resulting "brain drain" could represent a future safety risk unless appropriate succession planning is started expeditiously. This and other topics are covered in the section addressing workforce. In the case of the Space Shuttle, beneficial and mandatory safety and operational upgrades are being delayed because of a lack of sufficient present funding. Likewise, the ISS has little flexibility to begin long lead-time items for upgrades or contingency planning.

Quality of Life and Resiliency: Student Development Success.

ERIC Educational Resources Information Center

Forde, Margaret L.

2002-01-01

Argues that quality of life is a vital measure when counseling students to determine their best educational pathways to success. Explains that a student's current life status and his/her projected future are useful tools for making recommendations for development and for instilling motivation. Urges college personnel to actively engage students in…

Development of guidance for states transitioning to new safety analysis tools

NASA Astrophysics Data System (ADS)

Alluri, Priyanka

With about 125 people dying on US roads each day, the US Department of Transportation heightened the awareness of critical safety issues with the passage of SAFETEA-LU (Safe Accountable Flexible Efficient Transportation Equity Act---a Legacy for Users) legislation in 2005. The legislation required each of the states to develop a Strategic Highway Safety Plan (SHSP) and incorporate data-driven approaches to prioritize and evaluate program outcomes: Failure to do so resulted in funding sanctioning. In conjunction with the legislation, research efforts have also been progressing toward the development of new safety analysis tools such as IHSDM (Interactive Highway Safety Design Model), SafetyAnalyst, and HSM (Highway Safety Manual). These software and analysis tools are comparatively more advanced in statistical theory and level of accuracy, and have a tendency to be more data intensive. A review of the 2009 five-percent reports and excerpts from the nationwide survey revealed astonishing facts about the continuing use of traditional methods including crash frequencies and rates for site selection and prioritization. The intense data requirements and statistical complexity of advanced safety tools are considered as a hindrance to their adoption. In this context, this research aims at identifying the data requirements and data availability for SafetyAnalyst and HSM by working with both the tools. This research sets the stage for working with the Empirical Bayes approach by highlighting some of the biases and issues associated with the traditional methods of selecting projects such as greater emphasis on traffic volume and regression-to-mean phenomena. Further, the not-so-obvious issue with shorter segment lengths, which effect the results independent of the methods used, is also discussed. The more reliable and statistically acceptable Empirical Bayes methodology requires safety performance functions (SPFs), regression equations predicting the relation between crashes

For all the right reasons. Approaching CPOE from a patient safety and care quality perspective is the first critical step toward success.

PubMed

Hagland, Mark

2009-09-01

True CPOE success is about facilitating improved patient safety, care quality, and efficiency in a multidisciplinar environment, and on an ongoing basis. CPOE implementation forces clinician leaders to examine and rework long-ingrained care delivery processes, especially as they build or adapt order sets. The likelihood that CPOE will be a requirement of meaningful use could compel a rapid acceleration in implementation.

Educating for Safety.

ERIC Educational Resources Information Center

Rothe, J. Peter

1991-01-01

To enhance the chance for success in educating young drivers, there should be a balance between the content, structure, and goals of traffic safety programs and the normative rules governing young people's lives. Presents recommendations for safety education based on the notion of complementarity and using a multiperspective approach. (AF)

Limited English proficiency workers. Health and safety education.

PubMed

Hong, O S

2001-01-01

1. As the population of adults with limited English proficiency plays an increasingly important role in the United States workplaces, there has been a growing recognition that literacy and limited English skills affect health and safety training programs. 2. Several important principles can be used as the underlying framework to guide teaching workers with limited English proficiency: clear and vivid way of teaching; contextual curriculum based on work; using various teaching methods; and staff development. 3. Two feasible strategies were proposed to improve current situation in teaching health and safety to workers with limited English proficiency in one company: integrating safety and health education with ongoing in-house ESL instruction and developing a multilingual video program. 4. Successful development and implementation of proposed programs requires upper management support, workers' awareness and active participation, collaborative teamwork, a well structured action plan, testing of pilot program, and evaluation.

DISPELLING MYTHS AND MISCONCEPTIONS TO IMPLEMENT A SAFETY CULTURE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Potts, T. Todd; Smith, Ken; Hylko, James M.

2003-02-27

Industrial accidents are typically reported in terms of technological malfunctions, ignoring the human element in accident causation. However, over two-thirds of all accidents are attributable to human and organizational factors (e.g., planning, written procedures, job factors, training, communication, and teamwork), thereby affecting risk perception, behavior and attitudes. This paper reviews the development of WESKEM, LLC's Environmental, Safety, and Health (ES&H) Program that addresses human and organizational factors from a top-down, bottom-up approach. This approach is derived from the Department of Energy's Integrated Safety Management System. As a result, dispelling common myths and misconceptions about safety, while empowering employees to ''STOPmore » work'' if necessary, have contributed to reducing an unusually high number of vehicle, ergonomic and slip/trip/fall incidents successfully. Furthermore, the safety culture that has developed within WESKEM, LLC's workforce consists of three common characteristics: (1) all employees hold safety as a value; (2) each individual feels responsible for the safety of their co-workers as well as themselves; and (3) each individual is willing and able to ''go beyond the call of duty'' on behalf of the safety of others. WESKEM, LLC as a company, upholds the safety culture and continues to enhance its existing ES&H program by incorporating employee feedback and lessons learned collected from other high-stress industries, thereby protecting its most vital resource - the employees. The success of this program is evident by reduced accident and injury rates, as well as the number of safe work hours accrued while performing hands-on field activities. WESKEM, LLC (Paducah + Oak Ridge) achieved over 800,000 safe work hours through August 2002. WESKEM-Paducah has achieved over 665,000 safe work hours without a recordable injury or lost workday case since it started operations on February 28, 2000.« less

Implementing AORN recommended practices for medication safety.

PubMed

Hicks, Rodney W; Wanzer, Linda J; Denholm, Bonnie

2012-12-01

Medication errors in the perioperative setting can result in patient morbidity and mortality. The AORN "Recommended practices for medication safety" provide guidance to perioperative nurses in developing, implementing, and evaluating safe medication use practices. These practices include recognizing risk points in the medication use process, collaborating with pharmacy staff members, conducting preoperative assessments and postoperative evaluations (eg, medication reconciliation), and handling hazardous medications and pharmaceutical waste. Strategies for successful implementation of the recommended practices include promoting a basic understanding of the nurse's role in the medication use process and developing a medication management plan as well as policies and procedures that support medication safety and activities to measure compliance with safe practices. Published by Elsevier Inc.

Combining System Safety and Reliability to Ensure NASA CoNNeCT's Success

NASA Technical Reports Server (NTRS)

Havenhill, Maria; Fernandez, Rene; Zampino, Edward

2012-01-01

Hazard Analysis, Failure Modes and Effects Analysis (FMEA), the Limited-Life Items List (LLIL), and the Single Point Failure (SPF) List were applied by System Safety and Reliability engineers on NASA's Communications, Navigation, and Networking reConfigurable Testbed (CoNNeCT) Project. The integrated approach involving cross reviews of these reports by System Safety, Reliability, and Design engineers resulted in the mitigation of all identified hazards. The outcome was that the system met all the safety requirements it was required to meet.

Nuclear-safety institution in France: emergence and development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vallet, B.M.

1986-01-01

This research work examines the social construction of the nuclear-safety institution in France, and the concurrent increased focus on the nuclear-risk issue. Emphasis on risk and safety, as primarily technical issues, can partly be seen as a strategy. Employed by power elites in the nuclear technostructure, this diverts emphasis away from controversial and normative questions regarding the political and social consequences of technology to questions of technology that appear to be absolute to the technology itself. Nuclear safety, which started from a preoccupation with risk related to the nuclear energy research and development process, is examined using the analytic conceptmore » of field. As a social arena patterned to achieve specific tasks, this field is dominated by a body of state engineers recognized to have high-level scientific and administrative competences. It is structured by procedures and administrative hierarchies as well as by technical rules, norms, and standards. These are formalized and rationalized through technical, economic, political, and social needs; over time; they consolidate the field into an institution. The study documents the nuclear-safety institution as an integral part of the nuclear technostructure, which has historically used the specificity of its expertise as a buffer against outside interference.« less

Improving patient safety: lessons from rock climbing.

PubMed

Robertson, Nic

2012-02-01

How to improve patient safety remains an intractable problem, despite large investment and some successes. Academics have argued that the root of the problem is a lack of a comprehensive 'safety culture' in hospitals. Other safety-critical industries such as commercial aviation invest heavily in staff training to develop such a culture, but comparable programmes are almost entirely absent from the health care sector. In rock climbing and many other dangerous activities, the 'buddy system' is used to ensure that safety systems are adhered to despite adverse circumstances. This system involves two or more people using simple checks and clear communication to prevent problems causing harm. Using this system as an example could provide a simple, original and entertaining way of introducing medical students to the idea that human factors are central to ensuring patient safety. Teaching the buddy system may improve understanding and acceptance of other patient safety initiatives, and could also be used by junior doctors as a tool to improve the safety of their practice. © Blackwell Publishing Ltd 2012.

Building foundations for the future: the NHS Scotland advanced practice succession planning development pathway.

PubMed

Currie, Kay; Grundy, Maggie

2011-10-01

To highlight implications for managers from the implementation of a national advanced practice succession planning development pathway within Scotland. Internationally, advanced practice posts have often developed in an ad-hoc manner, with little organizational attention to succession planning. Evaluation of a pilot national succession planning development pathway identified mechanisms which facilitate or hamper effective planning for advanced practice roles. A responsive evaluation design incorporating semi-structured questionnaires to pathway participants (n = 15) and semi-structured telephone interviews with case-site pathway participants (n = 7) and their line managers. Managers believed the development pathway was worthwhile; however, there was limited strategic planning to match individuals' development to service need. Practitioners generally perceived managers as interested in their development, although levels of practical support varied. There is concern from both managers and practitioners regarding ongoing funding for advanced practice development. The present evaluation study reiterates the need for organizational commitment to succession planning including robust service needs analysis mechanisms and adequate funding for development processes. Nurse managers are viewed as the 'gatekeepers' to opportunities for developing advanced nurse practitioners; scare resources must be targeted effectively to support succession planning through the development of selected individuals for future advanced practice posts, justified by service need. © 2011 Blackwell Publishing Ltd.

The development and efficacy of safety training for commercial fishermen.

PubMed

Dzugan, Jerry

2010-10-01

Commercial fishing is still the most dangerous occupation in the United States. Efforts to have more stringent safety regulations in this industry beginning in the 1960s, culminated in the Commercial Fishing Vessel Safety Act of 1988. The purpose of this paper is to provide a short history of the development of safety training in the United States and the current training infrastructure. This paper will also review studies available regarding the effectiveness of safety training in reducing fatalities among fishermen. The lack of familiarity and practice with marine survival equipment such as life rafts, immersion suits, and emergency-locating beacons has been noted in National Transportation Safety Board and US Coast Guard casualty reports as a contributing factor in fatalities. These reports have demonstrated the importance of not just having survival equipment onboard, but training in how to use it effectively in an emergency. There is evidence that safety training has made a measurable impact in surviving an emergency at sea and that recent training (within 5 years) is most effective in saving lives. More recently, studies have been completed to understand how skills may diminish over time since initial training.

Development of Risk Assessment Matrix for NASA Engineering and Safety Center

NASA Technical Reports Server (NTRS)

Malone, Roy W., Jr.; Moses, Kelly

2004-01-01

This paper describes a study, which had as its principal goal the development of a sufficiently detailed 5 x 5 Risk Matrix Scorecard. The purpose of this scorecard is to outline the criteria by which technical issues can be qualitatively and initially prioritized. The tool using this score card has been proposed to be one of the information resources the NASA Engineering and Safety Center (NESC) takes into consideration when making decisions with respect to incoming information on safety concerns across the entire NASA agency. The contents of this paper discuss in detail each element of the risk matrix scorecard, definitions for those elements and the rationale behind the development of those definitions. This scorecard development was performed in parallel with the tailoring of the existing Futron Corporation Integrated Risk Management Application (IRMA) software tool. IRMA was tailored to fit NESC needs for evaluating incoming safety concerns and was renamed NESC Assessment Risk Management Application (NAFMA) which is still in developmental phase.

Benchmarking road safety performance: Identifying a meaningful reference (best-in-class).

PubMed

Chen, Faan; Wu, Jiaorong; Chen, Xiaohong; Wang, Jianjun; Wang, Di

2016-01-01

For road safety improvement, comparing and benchmarking performance are widely advocated as the emerging and preferred approaches. However, there is currently no universally agreed upon approach for the process of road safety benchmarking, and performing the practice successfully is by no means easy. This is especially true for the two core activities of which: (1) developing a set of road safety performance indicators (SPIs) and combining them into a composite index; and (2) identifying a meaningful reference (best-in-class), one which has already obtained outstanding road safety practices. To this end, a scientific technique that can combine the multi-dimensional safety performance indicators (SPIs) into an overall index, and subsequently can identify the 'best-in-class' is urgently required. In this paper, the Entropy-embedded RSR (Rank-sum ratio), an innovative, scientific and systematic methodology is investigated with the aim of conducting the above two core tasks in an integrative and concise procedure, more specifically in a 'one-stop' way. Using a combination of results from other methods (e.g. the SUNflower approach) and other measures (e.g. Human Development Index) as a relevant reference, a given set of European countries are robustly ranked and grouped into several classes based on the composite Road Safety Index. Within each class the 'best-in-class' is then identified. By benchmarking road safety performance, the results serve to promote best practice, encourage the adoption of successful road safety strategies and measures and, more importantly, inspire the kind of political leadership needed to create a road transport system that maximizes safety. Copyright © 2015 Elsevier Ltd. All rights reserved.

10 CFR 851.11 - Development and approval of worker safety and health program.

Code of Federal Regulations, 2010 CFR

2010-01-01

... workers at multi-contractor workplaces. (3) The worker safety and health program must describe how the... may be performed at a covered workplace unless an approved worker safety and health program is in... 10 Energy 4 2010-01-01 2010-01-01 false Development and approval of worker safety and health...

Success factors in technology development

NASA Astrophysics Data System (ADS)

Preston, John T.

1995-01-01

Universities in the U.S. have a significant impact on business through the transfer of technology. This paper describes goals and philosophy of the Technology Licensing Office at the Massachusetts Institute of Technology. This paper also relates the critical factors for susscessful technology transfer, particularly relating to new business formation. These critical factors include the quality of the technology, the quality of the management, the quality of the investor, the passion for success, and the image of the company. Descriptions of three different levels of investment are also given and the most successful level of investment for starting a new company is reviewed. Licensing to large companies is also briefly reviewed, as this type of licensing requires some different strategies than that of licensing to start-up companies. High quality critical factors and intelligent investment create rewards for the parties and successful ventures.

Design and development of food safety knowledge and attitude scales for consumer food safety education.

PubMed

Medeiros, Lydia C; Hillers, Virginia N; Chen, Gang; Bergmann, Verna; Kendall, Patricia; Schroeder, Mary

2004-11-01

The objective of this study was to design and develop food safety knowledge and attitude scales based on food-handling guidelines developed by a national panel of food safety experts. Knowledge (n=43) and attitude (n=49) questions were developed and pilot-tested with a variety of consumer groups. Final questions were selected based on item analysis and on validity and reliability statistical tests. Knowledge questions were tested in Washington State with participants in low-income nutrition education programs (pretest/posttest n=58, test/retest n=19) and college students (pretest/posttest n=34). Attitude questions were tested in Ohio with nutrition education program participants (n=30) and college students (non-nutrition majors n=138, nutrition majors n=57). Item analysis, paired sample t tests, Pearson's correlation coefficients, and Cronbach's alpha were used. Reliability and validity tests of individual items and the question sets were used to reduce the scales to 18 knowledge questions and 10 attitude questions. The knowledge and attitude scales covered topics ranked as important by a national panel of experts and met most validity and reliability standards. The 18-item knowledge questionnaire had instructional sensitivity (mean score increase of more than three points after instruction), internal reliability (Cronbach's alpha >.75), and produced similar results in test-retest without intervention (coefficient of stability=.81). Knowledge of correct procedures for hand washing and avoiding cross-contamination was widespread before instruction. Knowledge was limited regarding avoiding food preparation while ill, cooking hamburgers, high-risk foods, and whether cooked rice and potatoes could be stored at room temperature. The 10-item attitude scale had an appropriate range of responses (item difficulty) and produced similar results in test-retest ( P safety is

The Exposure Index: Developing firefighter safety performance measures

Treesearch

Dave Calkin; John Phipps; Tom Holmes; Jon Rieck; Matt Thompson

2011-01-01

A cornerstone of effective institutional learning and accountability is the development, tracking, and analysis of informative performance measures. In a previous issue of Fire Management Today ("A New Look at Risk Management," Winter 2011), a series of articles highlighted the importance of organizational safety and risk management and the challenges of...

Using Contemporary Leadership Skills in Medication Safety Programs.

PubMed

Hertig, John B; Hultgren, Kyle E; Weber, Robert J

2016-04-01

The discipline of studying medication errors and implementing medication safety programs in hospitals dates to the 1970s. These initial programs to prevent errors focused only on pharmacy operation changes - and not the broad medication use system. In the late 1990s, research showed that faulty systems, and not faulty people, are responsible for errors and require a multidisciplinary approach. The 2013 ASHP Statement on the Role of the Medication Safety Leader recommended that medication safety leaders be integrated team members rather than a single point of contact. Successful medication safety programs must employ a new approach - one that embraces the skills of all health care team members and positions many leaders to improve safety. This approach requires a new set of leadership skills based on contemporary management principles, including followership, team-building, tracking and assessing progress, storytelling and communication, and cultivating innovation, all of which promote transformational change. The application of these skills in developing or changing a medication safety program is reviewed in this article.

Framework Development Supporting the Safety Portal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Prescott, Steven Ralph; Kvarfordt, Kellie Jean; Vang, Leng

2015-07-01

In a collaborating scientific research arena it is important to have an environment where analysts have access to a shared repository of information, documents, and software tools, and be able to accurately maintain and track historical changes in models. The new Safety Portal cloud-based environment will be accessible remotely from anywhere regardless of computing platforms given that the platform has available Internet access and proper browser capabilities. Information stored at this environment would be restricted based on user assigned credentials. This report discusses current development of a cloud-based web portal for PRA tools.

How can we improve our understanding of cardiovascular safety liabilities to develop safer medicines?

PubMed Central

Laverty, HG; Benson, C; Cartwright, EJ; Cross, MJ; Garland, C; Hammond, T; Holloway, C; McMahon, N; Milligan, J; Park, BK; Pirmohamed, M; Pollard, C; Radford, J; Roome, N; Sager, P; Singh, S; Suter, T; Suter, W; Trafford, A; Volders, PGA; Wallis, R; Weaver, R; York, M; Valentin, JP

2011-01-01

Given that cardiovascular safety liabilities remain a major cause of drug attrition during preclinical and clinical development, adverse drug reactions, and post-approval withdrawal of medicines, the Medical Research Council Centre for Drug Safety Science hosted a workshop to discuss current challenges in determining, understanding and addressing ‘Cardiovascular Toxicity of Medicines’. This article summarizes the key discussions from the workshop that aimed to address three major questions: (i) what are the key cardiovascular safety liabilities in drug discovery, drug development and clinical practice? (ii) how good are preclinical and clinical strategies for detecting cardiovascular liabilities? and (iii) do we have a mechanistic understanding of these liabilities? It was concluded that in order to understand, address and ultimately reduce cardiovascular safety liabilities of new therapeutic agents there is an urgent need to: Fully characterize the incidence, prevalence and impact of drug-induced cardiovascular issues at all stages of the drug development process. Ascertain the predictive value of existing non-clinical models and assays towards the clinical outcome. Understand the mechanistic basis of cardiovascular liabilities; by addressing areas where it is currently not possible to predict clinical outcome based on preclinical safety data. Provide scientists in all disciplines with additional skills to enable them to better integrate preclinical and clinical data and to better understand the biological and clinical significance of observed changes. Develop more appropriate, highly relevant and predictive tools and assays to identify and wherever feasible to eliminate cardiovascular safety liabilities from molecules and wherever appropriate to develop clinically relevant and reliable safety biomarkers. PMID:21306581

Development of the Oregon traffic safety data archive : phases 1 and 2.

DOT National Transportation Integrated Search

2012-03-01

"This report describes the preliminary work to develop the Oregon Traffic Safety Data Archive (OrTSDA). The mission of OrTSDA is to build : the knowledge base of traffic safety data in Oregon. The archive hopes to become a valuable traffic safe...

Integrating Safety and Mission Assurance in Design

NASA Technical Reports Server (NTRS)

Cianciola, Chris; Crane, Kenneth

2008-01-01

This presentation describes how the Ares Projects are learning from the successes and failures of previous launch systems in order to maximize safety and reliability while maintaining fiscal responsibility. The Ares Projects are integrating Safety and Mission Assurance into design activities and embracing independent assessments by Quality experts in thorough reviews of designs and processes. Incorporating Lean thinking into the design process, Ares is also streamlining existing processes and future manufacturing flows which will yield savings during production. Understanding the value of early involvement of Quality experts, the Ares Projects are leading launch vehicle development into the 21st century.

Developing tools for the safety specification in risk management plans: lessons learned from a pilot project.

PubMed

Cooper, Andrew J P; Lettis, Sally; Chapman, Charlotte L; Evans, Stephen J W; Waller, Patrick C; Shakir, Saad; Payvandi, Nassrin; Murray, Alison B

2008-05-01

Following the adoption of the ICH E2E guideline, risk management plans (RMP) defining the cumulative safety experience and identifying limitations in safety information are now required for marketing authorisation applications (MAA). A collaborative research project was conducted to gain experience with tools for presenting and evaluating data in the safety specification. This paper presents those tools found to be useful and the lessons learned from their use. Archive data from a successful MAA were utilised. Methods were assessed for demonstrating the extent of clinical safety experience, evaluating the sensitivity of the clinical trial data to detect treatment differences and identifying safety signals from adverse event and laboratory data to define the extent of safety knowledge with the drug. The extent of clinical safety experience was demonstrated by plots of patient exposure over time. Adverse event data were presented using dot plots, which display the percentages of patients with the events of interest, the odds ratio, and 95% confidence interval. Power and confidence interval plots were utilised for evaluating the sensitivity of the clinical database to detect treatment differences. Box and whisker plots were used to display laboratory data. This project enabled us to identify new evidence-based methods for presenting and evaluating clinical safety data. These methods represent an advance in the way safety data from clinical trials can be analysed and presented. This project emphasises the importance of early and comprehensive planning of the safety package, including evaluation of the use of epidemiology data.

76 FR 53938 - Order of Succession for the Office of Policy Development and Research

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-30

... Office of Policy Development and Research AGENCY: Office of the Assistant Secretary for Policy Development and Research, HUD. ACTION: Notice of order of succession. SUMMARY: In this notice, the Assistant Secretary for Policy Development and Research designates the Order of Succession for the Office of the...

76 FR 64364 - Order of Succession for the Office of Community Planning and Development

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-18

... DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT [Docket No. FR-5556-D-02] Order of Succession for the Office of Community Planning and Development AGENCY: Office of the Assistant Secretary for Community Planning and Development, HUD. ACTION: Notice of Order of Succession. SUMMARY: In this notice, the...

[How patient safety programmes can be successfully implemented - an example from Switzerland].

PubMed

Kobler, Irene; Mascherek, Anna; Bezzola, Paula

2015-01-01

Internationally, the implementation of patient safety programmes poses a major challenge. In the first part, we will demonstrate that various measures have been found to be effective in the literature but that they often do not reach the patient because their implementation proves difficult. Difficulties arise from both the complexity of the interventions themselves and from different organisational settings in individual hospitals. The second part specifically describes the implementation of patient safety improvement programmes in Switzerland and discusses measures intended to bridge the gap between the theory and practice of implementation in Switzerland. Then, the national pilot programme to improve patient safety in surgery is presented, which was launched by the federal Swiss government and has been implemented by the patient safety foundation. Procedures, challenges and highlights in implementing the programme in Switzerland on a national level are outlined. Finally, first (preliminary) results are presented and critically discussed. Copyright © 2015. Published by Elsevier GmbH.

Human factors in safety and business management.

PubMed

Vogt, Joachim; Leonhardt, Jorg; Koper, Birgit; Pennig, Stefan

2010-02-01

facilitating or obstructing success. A significant need for research and development is seen here because human factors are of increasing importance for organisational success. This paper suggests integrating human factors in safety management of aviation businesses - a top-ranking partner of technology and finance - and managing it with professional tools. The tools HPM and BSC were identified as potentially useful for this purpose. They were successfully applied in case studies briefly presented in this paper. In terms of specific safety-steering tools in the aviation industry, further elaboration and empirical study is crucial. Statement of Relevance: The importance of human factors is recognised by operators at the sharp end of aviation, where flights are conducted or coordinated. At the blunt end, measurement tools are needed to manage operational resources.

Railway safety climate: a study on organizational development.

PubMed

Cheng, Yung-Hsiang

2017-09-07

The safety climate of an organization is considered a leading indicator of potential risk for railway organizations. This study adopts the perceptual measurement-individual attribute approach to investigate the safety climate of a railway organization. The railway safety climate attributes are evaluated from the perspective of railway system staff. We identify four safety climate dimensions from exploratory factor analysis, namely safety communication, safety training, safety management and subjectively evaluated safety performance. Analytical results indicate that the safety climate differs at vertical and horizontal organizational levels. This study contributes to the literature by providing empirical evidence of the multilevel safety climate in a railway organization, presents possible causes of the differences under various cultural contexts and differentiates between safety climate scales for diverse workgroups within the railway organization. This information can be used to improve the safety sustainability of railway organizations and to conduct safety supervisions for the government.

Children of the Land: Adversity and Success in Rural America. Studies on Successful Adolescent Development.

ERIC Educational Resources Information Center

Elder, Glen H., Jr.; Conger, Rand D.

Based on the rural life experiences of Iowa children who grew up during the great farm crisis of the 1980s, this book focuses on successful adolescent development and its links to the social resources of families with ties to the land. In 1989, the Iowa Youth and Families Project began a panel study of 451 two-parent families in north central…

77 FR 31974 - Order of Succession for the Office of Community Planning and Development

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-30

... DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT [Docket No. FR-5642-D-02] Order of Succession for the Office of Community Planning and Development AGENCY: Office of the Secretary, HUD. ACTION: Notice of Order of Succession for the Office of Community Planning and Development. SUMMARY: In this notice, the...

Development a Comprehensive Food Safety System in Serbia- A Narrative Review Article

PubMed Central

RADOVIĆ, Vesela; KEKOVIĆ, Zoran; AGIĆ, Samir

2014-01-01

Abstract Background Food safety issues are not a new issue in science, but due to the dynamic changes in the modern world it is as equally important as decades ago. The aim of the study was to address the efforts in the development of a comprehensive food safety system in Serbia, and make specific recommendations regarding the improvement of epidemiological investigation capacity as a useful tool which contributes to improving the public health by joint efforts of epidemiologists and law enforcement. Methods We used the methodology appropriate for social sciences. Results The findings show the current state-of-affairs in the area of food safety and health care system and present some most important weaknesses which have to be overcome. Policy makers need timely and reliable information so that they can make informed decisions to improve the population health in an ongoing process of seeking full membership in the European Union. Conclusion Serbia has to apply significant changes in practice because the current state-of-affairs in the area of food safety and health care system is not so favourable due to numerous both objective and subjective factors. Hence, the policy-makers must work on the development of epidemiological investigation capacities as a firm basis for greater efficiency and effectiveness. Epidemiologists would not stay alone in their work. Law enforcement as well as many other stakeholders should recognize their new role in the process of the development of epidemiological investigation capacity as a tool for the development of a comprehensive food safety system in Serbia. PMID:25909057

Video Game Development Strategies for Creating Successful Cognitively Challenging Games

ERIC Educational Resources Information Center

Williams, Walter K.

2018-01-01

The video game industry is a global multibillion dollar industry with millions of players. The process of developing video games is essential for the continued growth of the industry, and developers need to employ effective strategies that will help them to create successful games. The purpose of this explorative qualitative single case study was…

Some Challenges in the Design of Human-Automation Interaction for Safety-Critical Systems

NASA Technical Reports Server (NTRS)

Feary, Michael S.; Roth, Emilie

2014-01-01

Increasing amounts of automation are being introduced to safety-critical domains. While the introduction of automation has led to an overall increase in reliability and improved safety, it has also introduced a class of failure modes, and new challenges in risk assessment for the new systems, particularly in the assessment of rare events resulting from complex inter-related factors. Designing successful human-automation systems is challenging, and the challenges go beyond good interface development (e.g., Roth, Malin, & Schreckenghost 1997; Christoffersen & Woods, 2002). Human-automation design is particularly challenging when the underlying automation technology generates behavior that is difficult for the user to anticipate or understand. These challenges have been recognized in several safety-critical domains, and have resulted in increased efforts to develop training, procedures, regulations and guidance material (CAST, 2008, IAEA, 2001, FAA, 2013, ICAO, 2012). This paper points to the continuing need for new methods to describe and characterize the operational environment within which new automation concepts are being presented. We will describe challenges to the successful development and evaluation of human-automation systems in safety-critical domains, and describe some approaches that could be used to address these challenges. We will draw from experience with the aviation, spaceflight and nuclear power domains.

Success Avoidant Motivation and Behavior; Its Development Correlates and Situational Determinants. Final Report.

ERIC Educational Resources Information Center

Horner, Matina S.

This paper reports on a successful attempt to understand success avoidant motivation and behavior by the development of an empirically sophisticated scoring system of success avoidant motivation and the observation of its behavioral correlates and situational determinants. Like most of the work on achievement motivation, the study was carried out…

Bicycle Facilities That Address Safety, Crime, and Economic Development: Perceptions from Morelia, Mexico.

PubMed

Alveano-Aguerrebere, Inés; Javier Ayvar-Campos, Francisco; Farvid, Maryam; Lusk, Anne

2017-12-22

México is a developing nation and, in the city of Morelia, the concept of the bicyclist as a road user appeared only recently in the Municipal Traffic Regulations. Perhaps the right bicycle infrastructure could address safety, crime, and economic development. To identify the best infrastructure, six groups in Morelia ranked and commented on pictures of bicycle environments that exist in bicycle-friendly nations. Perceptions about bike paths, but only those with impossible-to-be-driven-over solid barriers, were associated with safety from crashes, lowering crime, and contributing to economic development. Shared use paths were associated with lowering the probability of car/bike crashes but lacked the potential to deter crime and foster the local economy. Joint bus and bike lanes were associated with lower safety because of the unwillingness by Mexican bus drivers to be courteous to bicyclists. Gender differences about crash risk biking in the road with the cars (6 best/0 worst scenario) were statistically significant (1.4 for male versus 0.69 for female; p < 0.001). For crashes, crime, and economic development, perceptions about bicycle infrastructure were different in this developing nation perhaps because policy, institutional context, and policing (ticketing for unlawful parking) are not the same as in a developed nation. Countries such as Mexico should consider building cycle tracks with solid barriers to address safety, crime, and economic development.

Bicycle Facilities That Address Safety, Crime, and Economic Development: Perceptions from Morelia, Mexico

PubMed Central

Alveano-Aguerrebere, Inés; Farvid, Maryam; Lusk, Anne

2017-01-01

México is a developing nation and, in the city of Morelia, the concept of the bicyclist as a road user appeared only recently in the Municipal Traffic Regulations. Perhaps the right bicycle infrastructure could address safety, crime, and economic development. To identify the best infrastructure, six groups in Morelia ranked and commented on pictures of bicycle environments that exist in bicycle-friendly nations. Perceptions about bike paths, but only those with impossible-to-be-driven-over solid barriers, were associated with safety from crashes, lowering crime, and contributing to economic development. Shared use paths were associated with lowering the probability of car/bike crashes but lacked the potential to deter crime and foster the local economy. Joint bus and bike lanes were associated with lower safety because of the unwillingness by Mexican bus drivers to be courteous to bicyclists. Gender differences about crash risk biking in the road with the cars (6 best/0 worst scenario) were statistically significant (1.4 for male versus 0.69 for female; p < 0.001). For crashes, crime, and economic development, perceptions about bicycle infrastructure were different in this developing nation perhaps because policy, institutional context, and policing (ticketing for unlawful parking) are not the same as in a developed nation. Countries such as Mexico should consider building cycle tracks with solid barriers to address safety, crime, and economic development. PMID:29271873

Managerial Solutions: An Exercise in Developing Successful Communication Strategies.

ERIC Educational Resources Information Center

Hufman, Melody

Noting that every business person needs good communication skills, whether managers and employees, superordinates and subordinates, this paper outlines an exercise to teach students to set objectives, develop criteria, analyze perspectives, and implement successful communication strategies. The total time for the exercise is 2 hours and the number…

Finite mixture modeling approach for developing crash modification factors in highway safety analysis.

PubMed

Park, Byung-Jung; Lord, Dominique; Wu, Lingtao

2016-10-28

This study aimed to investigate the relative performance of two models (negative binomial (NB) model and two-component finite mixture of negative binomial models (FMNB-2)) in terms of developing crash modification factors (CMFs). Crash data on rural multilane divided highways in California and Texas were modeled with the two models, and crash modification functions (CMFunctions) were derived. The resultant CMFunction estimated from the FMNB-2 model showed several good properties over that from the NB model. First, the safety effect of a covariate was better reflected by the CMFunction developed using the FMNB-2 model, since the model takes into account the differential responsiveness of crash frequency to the covariate. Second, the CMFunction derived from the FMNB-2 model is able to capture nonlinear relationships between covariate and safety. Finally, following the same concept as those for NB models, the combined CMFs of multiple treatments were estimated using the FMNB-2 model. The results indicated that they are not the simple multiplicative of single ones (i.e., their safety effects are not independent under FMNB-2 models). Adjustment Factors (AFs) were then developed. It is revealed that current Highway Safety Manual's method could over- or under-estimate the combined CMFs under particular combination of covariates. Safety analysts are encouraged to consider using the FMNB-2 models for developing CMFs and AFs. Copyright © 2016 Elsevier Ltd. All rights reserved.

Community Literacy at Work with STRIDE (Success Through Reading Improvement and DEvelopment): Overview of a Successful Community Literacy Program.

ERIC Educational Resources Information Center

Macy, Rita

STRIDE (Success Through Reading Improvement and DEvelopment) is a literacy program developed in 1986 by Crowder College, located in the rural Ozarks of southwestern Missouri. Serving all age groups with trained literacy tutors ranging in age from 11 to over 60, STRIDE has been built on five main activities: (1) develop a philosophy that is…

Safety coaches in radiology: decreasing human error and minimizing patient harm.

PubMed

Dickerson, Julie M; Koch, Bernadette L; Adams, Janet M; Goodfriend, Martha A; Donnelly, Lane F

2010-09-01

Successful programs to improve patient safety require a component aimed at improving safety culture and environment, resulting in a reduced number of human errors that could lead to patient harm. Safety coaching provides peer accountability. It involves observing for safety behaviors and use of error prevention techniques and provides immediate feedback. For more than a decade, behavior-based safety coaching has been a successful strategy for reducing error within the context of occupational safety in industry. We describe the use of safety coaches in radiology. Safety coaches are an important component of our comprehensive patient safety program.

Michigan urban trunkline intersections safety performance functions (SPFs) development and support.

DOT National Transportation Integrated Search

2015-06-01

This study involves the development of safety performance functions (SPFs) for signalized and stop-controlled intersections : located along urban and suburban arterials in the state of Michigan. Extensive databases were developed that resulted in the...

Patient Safety Learning Systems: A Systematic Review and Qualitative Synthesis.

PubMed

2017-01-01

A patient safety learning system (sometimes called a critical incident reporting system) refers to structured reporting, collation, and analysis of critical incidents. To inform a provincial working group's recommendations for an Ontario Patient Safety Event Learning System, a systematic review was undertaken to determine design features that would optimize its adoption into the health care system and would inform implementation strategies. The objective of this review was to address two research questions: (a) what are the barriers to and facilitators of successful adoption of a patient safety learning system reported by health professionals and (b) what design components maximize successful adoption and implementation? To answer the first question, we used a published systematic review. To answer the second question, we used scoping study methodology. Common barriers reported in the literature by health care professionals included fear of blame, legal penalties, the perception that incident reporting does not improve patient safety, lack of organizational support, inadequate feedback, lack of knowledge about incident reporting systems, and lack of understanding about what constitutes an error. Common facilitators included a non-accusatory environment, the perception that incident reporting improves safety, clarification of the route of reporting and of how the system uses reports, enhanced feedback, role models (such as managers) using and promoting reporting, legislated protection of those who report, ability to report anonymously, education and training opportunities, and clear guidelines on what to report. Components of a patient safety learning system that increased successful adoption and implementation were emphasis on a blame-free culture that encourages reporting and learning, clear guidelines on how and what to report, making sure the system is user-friendly, organizational development support for data analysis to generate meaningful learning outcomes

Development of a conceptual integrated traffic safety problem identification database

DOT National Transportation Integrated Search

1999-12-01

The project conceptualized a traffic safety risk management information system and statistical database for improved problem-driver identification, countermeasure development, and resource allocation. The California Department of Motor Vehicles Drive...

What can nanosafety learn from drug development? The feasibility of "safety by design".

PubMed

Hjorth, Rune; van Hove, Lilian; Wickson, Fern

2017-04-01

"Safety by design" (SbD) is an intuitively appealing concept that is on the rise within nanotoxicology and nanosafety research, as well as within nanotechnology research policy. It leans on principles established within drug discovery and development (DDD) and seeks to address safety early, as well as throughout product development. However, it remains unclear what the concept of SbD exactly entails for engineered nanomaterials (ENMs) or how it is envisioned to be implemented. Here, we review the concept as it is emerging in European research and compare its resemblance with the safety testing and assessment practices in DDD. From this comparison, it is clear that "safety" is not obtained through DDD, and that SbD should be considered a starting point rather than an end, meaning that products will still need to progress through thorough safety evaluations and regulation. We conclude that although risk reduction is clearly desirable, the way SbD is currently communicated tends to treat safety as an inherent material property and that this is fundamentally problematic as it represents a recasting and reduction of societal issues into technical problems. SbD therefore faces a multitude of challenges, from practical implementation to unrealistic stakeholder expectations.

The Development of a Vocational Safety Guide for Missouri's Practitioners. Final Report.

ERIC Educational Resources Information Center

Dyrenfurth, Michael; Linhardt, Richard

A project was conducted to develop a comprehensive vocational education safety guide for local administrators and teachers. To generate the guide, the following steps were completed: (1) a review of key related research, literature, and federal and state legislation, including vocational safety guides from 18 states; reference material from the…

Motor vehicle safety : comprehensive state programs offer best opportunity for increasing use of safety belts

DOT National Transportation Integrated Search

1996-01-01

This report describes the nation's progress in achieving goals for the use of safety belts in motor vehicles, assesses the strategies used most successfully by some states to increase the use of safety belts, and identifies federal strategies that co...

The need for strategic development of safety sciences.

PubMed

Busquet, Francois; Hartung, Thomas

2017-01-01

The practice of risk assessment and regulation of substances has largely developed as a patchwork of circumstantial additions to a nowadays more or less shared international toolbox. The dominant drivers from the US and Europe have pursued remarkably different approaches in the use of these tools for regulation, i.e., a more risk-based approach in the US and a more precautionary approach in Europe. We argue that there is need for scientific developments not only for the tools but also for their application, i.e., a need for Regulatory Science or, perhaps better, Safety Science. While some of this is emerging on the US side as strategic reports, e.g., from the National Academies, the NIH and the regulatory agencies, especially the EPA and the FDA, such strategic developments beyond technological developments are largely lacking in Europe or have started only recently at EFSA, ECHA or within the flagship project EU-ToxRisk. This article provides a rationale for the creation of a European Safety Sciences Institute (ESSI) based on regulatory and scientific needs, political context and current EU missions. Moreover, the possible modus operandi of ESSI will be described along with possible working formats as well as anticipated main tasks and duties. This mirrors the triple alliance on the American side (US EPA, NIH and FDA) in revamping regulatory sciences. Moreover, this could fit the political agenda of the European Commission for better implementation of existing EU legislation rather than creating new laws.

Towards Developing a Theoretical Framework for Measuring Public Sector Managers' Career Success

ERIC Educational Resources Information Center

Rasdi, Roziah Mohd; Ismail, Maimunah; Uli, Jegak; Noah, Sidek Mohd

2009-01-01

Purpose: The purpose of this paper is to develop a theoretical framework for measuring public sector managers' career success. Design/methodology/approach: The theoretical foundation used in this study is social cognitive career theory. To conduct a literature search, several keywords were identified, i.e. career success, objective and subjective…

Dance Talent Development: Case Studies of Successful Dancers in Finland and Singapore

ERIC Educational Resources Information Center

Chua, Joey

2014-01-01

Though anchored in cross-cultural comparisons, this study aims to identify the key factors that impacted the talent development of successful dancers from childhood through adulthood. Case studies of eight Finnish and Singaporean ballet and contemporary dancers exemplify the qualities of successful dancers in terms of their career achievements and…

Implementation of safety management systems in Hong Kong construction industry - A safety practitioner's perspective.

PubMed

Yiu, Nicole S N; Sze, N N; Chan, Daniel W M

2018-02-01

In the 1980s, the safety management system (SMS) was introduced in the construction industry to mitigate against workplaces hazards, reduce the risk of injuries, and minimize property damage. Also, the Factories and Industrial Undertakings (Safety Management) Regulation was introduced on 24 November 1999 in Hong Kong to empower the mandatory implementation of a SMS in certain industries including building construction. Therefore, it is essential to evaluate the effectiveness of the SMS in improving construction safety and identify the factors that influence its implementation in Hong Kong. A review of the current state-of-the-practice helped to establish the critical success factors (CSFs), benefits, and difficulties of implementing the SMS in the construction industry, while structured interviews were used to establish the key factors of the SMS implementation. Results of the state-of-the-practice review and structured interviews indicated that visible senior commitment, in terms of manpower and cost allocation, and competency of safety manager as key drivers for the SMS implementation. More so, reduced accident rates and accident costs, improved organization framework, and increased safety audit ratings were identified as core benefits of implementing the SMS. Meanwhile, factors such as insufficient resources, tight working schedule, and high labor turnover rate were the key challenges to the effective SMS implementation in Hong Kong. The findings of the study were consistent and indicative of the future development of safety management practice and the sustainable safety improvement of Hong Kong construction industry in the long run. Copyright © 2018 National Safety Council and Elsevier Ltd. All rights reserved.

Development and Psychometric Analysis of a Nurses' Attitudes and Skills Safety Scale: Initial Results.

PubMed

Armstrong, Gail E; Dietrich, Mary; Norman, Linda; Barnsteiner, Jane; Mion, Lorraine

Health care organizations have incorporated updated safety principles in the analysis of errors and in norms and standards. Yet no research exists that assesses bedside nurses' perceived skills or attitudes toward updated safety concepts. The aims of this study were to develop a scale assessing nurses' perceived skills and attitudes toward updated safety concepts, determine content validity, and examine internal consistency of the scale and subscales. Understanding nurses' perceived skills and attitudes about safety concepts can be used in targeting strategies to enhance their safety practices.

School Bus Fleet Safety: Planning and Development.

ERIC Educational Resources Information Center

Bieber, Robert M.

1984-01-01

To ensure worker safety, fleet safety managers need professional staffs, good access to top management, and sufficient authority to discharge their duties. Safety programs should include careful driver hiring; training, including orientation, testing, and practice; comprehensive accident reporting; and cooperative compliance programs with…

Development and Execution of the RUNSAFE Runway Safety Bayesian Belief Network Model

NASA Technical Reports Server (NTRS)

Green, Lawrence L.

2015-01-01

One focus area of the National Aeronautics and Space Administration (NASA) is to improve aviation safety. Runway safety is one such thrust of investigation and research. The two primary components of this runway safety research are in runway incursion (RI) and runway excursion (RE) events. These are adverse ground-based aviation incidents that endanger crew, passengers, aircraft and perhaps other nearby people or property. A runway incursion is the incorrect presence of an aircraft, vehicle or person on the protected area of a surface designated for the landing and take-off of aircraft; one class of RI events simultaneously involves two aircraft, such as one aircraft incorrectly landing on a runway while another aircraft is taking off from the same runway. A runway excursion is an incident involving only a single aircraft defined as a veer-off or overrun off the runway surface. Within the scope of this effort at NASA Langley Research Center (LaRC), generic RI, RE and combined (RI plus RE, or RUNSAFE) event models have each been developed and implemented as a Bayesian Belief Network (BBN). Descriptions of runway safety issues from the literature searches have been used to develop the BBN models. Numerous considerations surrounding the process of developing the event models have been documented in this report. The event models were then thoroughly reviewed by a Subject Matter Expert (SME) panel through multiple knowledge elicitation sessions. Numerous improvements to the model structure (definitions, node names, node states and the connecting link topology) were made by the SME panel. Sample executions of the final RUNSAFE model have been presented herein for baseline and worst-case scenarios. Finally, a parameter sensitivity analysis for a given scenario was performed to show the risk drivers. The NASA and LaRC research in runway safety event modeling through the use of BBN technology is important for several reasons. These include: 1) providing a means to clearly

Development of a large truck safety data needs study plan. Vol. 1, Summary

DOT National Transportation Integrated Search

1986-02-01

This report discusses the results of a study to determine the data needs necessary to address truck safety issues and to develop a data collection and analysis plan. Priority truck safety issues that are amenable to truck accident data analyses were ...

Implementation of a patient safety program at a tertiary health system: A longitudinal analysis of interventions and serious safety events.

PubMed

Cropper, Douglas P; Harb, Nidal H; Said, Patricia A; Lemke, Jon H; Shammas, Nicolas W

2018-04-01

We hypothesize that implementation of a safety program based on high reliability organization principles will reduce serious safety events (SSE). The safety program focused on 7 essential elements: (a) safety rounding, (b) safety oversight teams, (c) safety huddles, (d) safety coaches, (e) good catches/safety heroes, (f) safety education, and (g) red rule. An educational curriculum was implemented focusing on changing high-risk behaviors and implementing critical safety policies. All unusual occurrences were captured in the Midas system and investigated by risk specialists, the safety officer, and the chief medical officer. A multidepartmental committee evaluated these events, and a root cause analysis (RCA) was performed. Events were tabulated and serious safety event (SSE) recorded and plotted over time. Safety success stories (SSSs) were also evaluated over time. A steady drop in SSEs was seen over 9 years. Also a rise in SSSs was evident, reflecting on staff engagement in the program. The parallel change in SSEs, SSSs, and the implementation of various safety interventions highly suggest that the program was successful in achieving its goals. A safety program based on high-reliability organization principles and made a core value of the institution can have a significant positive impact on reducing SSEs. © 2018 American Society for Healthcare Risk Management of the American Hospital Association.

Development of a safety decision-making scenario to measure worker safety in agriculture.

PubMed

Mosher, G A; Keren, N; Freeman, S A; Hurburgh, C R

2014-04-01

Human factors play an important role in the management of occupational safety, especially in high-hazard workplaces such as commercial grain-handling facilities. Employee decision-making patterns represent an essential component of the safety system within a work environment. This research describes the process used to create a safety decision-making scenario to measure the process that grain-handling employees used to make choices in a safety-related work task. A sample of 160 employees completed safety decision-making simulations based on a hypothetical but realistic scenario in a grain-handling environment. Their choices and the information they used to make their choices were recorded. Although the employees emphasized safety information in their decision-making process, not all of their choices were safe choices. Factors influencing their choices are discussed, and implications for industry, management, and workers are shared.

Development of safety information materials and media plans for elderly pedestrians

DOT National Transportation Integrated Search

1993-06-01

The objectives of this study were to: 1) develop pedestrian safety messages which will have a countermeasure effect on the specific types of accidents occurring to elderly pedestrians and 2) develop media plans for use by NHTSA in disseminating the i...

Using Contemporary Leadership Skills in Medication Safety Programs

PubMed Central

Hertig, John B.; Hultgren, Kyle E.; Weber, Robert J.

2016-01-01

The discipline of studying medication errors and implementing medication safety programs in hospitals dates to the 1970s. These initial programs to prevent errors focused only on pharmacy operation changes – and not the broad medication use system. In the late 1990s, research showed that faulty systems, and not faulty people, are responsible for errors and require a multidisciplinary approach. The 2013 ASHP Statement on the Role of the Medication Safety Leader recommended that medication safety leaders be integrated team members rather than a single point of contact. Successful medication safety programs must employ a new approach – one that embraces the skills of all health care team members and positions many leaders to improve safety. This approach requires a new set of leadership skills based on contemporary management principles, including followership, team-building, tracking and assessing progress, storytelling and communication, and cultivating innovation, all of which promote transformational change. The application of these skills in developing or changing a medication safety program is reviewed in this article. PMID:27303083

Do we know what foundation year doctors think about patient safety incident reporting? Development of a Web based tool to assess attitude and knowledge.

PubMed

Robson, Jean; de Wet, Carl; McKay, John; Bowie, Paul

2011-11-01

Making healthcare safer is an international priority. Patient safety modules are now taught in medical schools, and methods to assess related student knowledge and attitudes have been developed. However, little is known about the attitudes and knowledge which foundation doctors are developing to patient safety and incident reporting in the healthcare workplace, since a specific assessment tool appears to be lacking. To develop, content validate and pilot test an online questionnaire survey to elicit foundation doctors' knowledge and experience of patient safety and incident reporting, and assess related attitudes and behaviours. Questionnaire content validity was facilitated through: a steering group; literature review; feedback from foundation year doctors and consultant staff; a modified Delphi group; and completion of a content validity index by experts. In 2010 a cross-sectional online survey of 110 foundation year 1 and 2 doctors was then undertaken in three Scottish NHS board areas, utilising the developed 25 item questionnaire. The questionnaire was validated, and piloted among 69 foundation year doctors who responded to the questionnaire. The pilot has provided valuable insights into trainee attitudes and experience. For example, 32 (48%) believed that most safety incidents were due to things that they could not do anything about; and 31 (43%) admitted to being involved in medication errors which were not formally reported. The pilot study was successful in taking the first steps to developing a validated survey questionnaire for a key staff group, foundation year doctors, in a priority area. However, the findings raise concerns about trainee experience of and attitudes to reporting, and the frequency with which incidents go unreported.

Individual safety performance in the construction industry: development and validation of two short scales.

PubMed

DeArmond, Sarah; Smith, April E; Wilson, Christina L; Chen, Peter Y; Cigularov, Konstantin P

2011-05-01

In the current research a short measure of safety performance is developed for use in the construction industry and the relationships between different components of safety performance and safety outcomes (e.g., occupational injuries and work-related pain) are explored within the construction context. This research consists of two field studies. In the first, comprehensive measures of safety compliance and safety participation were shortened and modified to be appropriate for use in construction. Evidence of reliability and validity is provided. Both safety compliance and safety participation were negatively related to occupational injuries, yet these two correlations were not statistically different. In the second study, we investigated the relationships between these two components of safety performance and work-related pain frequency, in addition to replicating Study 1. Safety compliance had a stronger negative relationship with pain than safety participation. Implications for research are discussed. Copyright © 2010 Elsevier Ltd. All rights reserved.

Understanding patient safety performance and educational needs using the 'Safety-II' approach for complex systems.

PubMed

McNab, Duncan; Bowie, Paul; Morrison, Jill; Ross, Alastair

2016-11-01

Participation in projects to improve patient safety is a key component of general practice (GP) specialty training, appraisal and revalidation. Patient safety training priorities for GPs at all career stages are described in the Royal College of General Practitioners' curriculum. Current methods that are taught and employed to improve safety often use a 'find-and-fix' approach to identify components of a system (including humans) where performance could be improved. However, the complex interactions and inter-dependence between components in healthcare systems mean that cause and effect are not always linked in a predictable manner. The Safety-II approach has been proposed as a new way to understand how safety is achieved in complex systems that may improve quality and safety initiatives and enhance GP and trainee curriculum coverage. Safety-II aims to maximise the number of events with a successful outcome by exploring everyday work. Work-as-done often differs from work-as-imagined in protocols and guidelines and various ways to achieve success, dependent on work conditions, may be possible. Traditional approaches to improve the quality and safety of care often aim to constrain variability but understanding and managing variability may be a more beneficial approach. The application of a Safety-II approach to incident investigation, quality improvement projects, prospective analysis of risk in systems and performance indicators may offer improved insight into system performance leading to more effective change. The way forward may be to combine the Safety-II approach with 'traditional' methods to enhance patient safety training, outcomes and curriculum coverage.

Development and Psychometric Analysis of a Nurses’ Attitudes and Skills Safety Scale: Initial Results

PubMed Central

Armstrong, Gail E.; Dietrich, Mary; Norman, Linda; Barnsteiner, Jane; Mion, Lorraine

2016-01-01

Health care organizations have incorporated updated safety principles in the analysis of errors and in norms and standards. Yet no research exists that assesses bedside nurses’ perceived skills or attitudes toward updated safety concepts. The aims of this study were to develop a scale assessing nurses’ perceived skills and attitudes toward updated safety concepts, determine content validity, and examine internal consistency of the scale and subscales. Understanding nurses’ perceived skills and attitudes about safety concepts can be used in targeting strategies to enhance their safety practices. PMID:27479518

Safety Critical Mechanisms

NASA Technical Reports Server (NTRS)

Robertson, Brandan

2008-01-01

Spaceflight mechanisms have a reputation for being difficult to develop and operate successfully. This reputation is well earned. Many circumstances conspire to make this so: the environments in which the mechanisms are used are extremely severe, there is usually limited or no maintenance opportunity available during operation due to this environment, the environments are difficult to replicate accurately on the ground, the expense of the mechanism development makes it impractical to build and test many units for long periods of time before use, mechanisms tend to be highly specialized and not prone to interchangeability or off-the-shelf use, they can generate and store a lot of energy, and the nature of mechanisms themselves, as a combination of structures, electronics, etc. designed to accomplish specific dynamic performance, makes them very complex and subject to many unpredictable interactions of many types. In addition to their complexities, mechanism are often counted upon to provide critical vehicle functions that can result in catastrophic events should the functions not be performed. It is for this reason that mechanisms are frequently subjected to special scrutiny in safety processes. However, a failure tolerant approach, along with good design and development practices and detailed design reviews, can be developed to allow such notoriously troublesome mechanisms to be utilized confidently in safety-critical applications.

Developing a successful robotics program.

PubMed

Luthringer, Tyler; Aleksic, Ilija; Caire, Arthur; Albala, David M

2012-01-01

Advancements in the robotic surgical technology have revolutionized the standard of care for many surgical procedures. The purpose of this review is to evaluate the important considerations in developing a new robotics program at a given healthcare institution. Patients' interest in robotic-assisted surgery has and continues to grow because of improved outcomes and decreased periods of hospitalization. Resulting market forces have created a solid foundation for the implementation of robotic surgery into surgical practice. Given proper surgeon experience and an efficient system, robotic-assisted procedures have been cost comparable to open surgical alternatives. Surgeon training and experience is closely linked to the efficiency of a new robotics program. Formally trained robotic surgeons have better patient outcomes and shorter operative times. Training in robotics has shown no negative impact on patient outcomes or mentor learning curves. Individual economic factors of local healthcare settings must be evaluated when planning for a new robotics program. The high cost of the robotic surgical platform is best offset with a large surgical volume. A mature, experienced surgeon is integral to the success of a new robotics program.

Developing the radiation protection safety culture in the UK.

PubMed

Cole, P; Hallard, R; Broughton, J; Coates, R; Croft, J; Davies, K; Devine, I; Lewis, C; Marsden, P; Marsh, A; McGeary, R; Riley, P; Rogers, A; Rycraft, H; Shaw, A

2014-06-01

In the UK, as elsewhere, there is potential to improve how radiological challenges are addressed through improvement in, or development of, a strong radiation protection (RP) safety culture. In preliminary work in the UK, two areas have been identified as having a strong influence on UK society: the healthcare and nuclear industry sectors. Each has specific challenges, but with many overlapping common factors. Other sectors will benefit from further consideration.In order to make meaningful comparisons between these two principal sectors, this paper is primarily concerned with cultural aspects of RP in the working environment and occupational exposures rather than patient doses.The healthcare sector delivers a large collective dose to patients each year, particularly for diagnostic purposes, which continues to increase. Although patient dose is not the focus, it must be recognised that collective patient dose is inevitably linked to collective occupational exposure, especially in interventional procedures.The nuclear industry faces major challenges as work moves from operations to decommissioning on many sites. This involves restarting work in the plants responsible for the much higher radiation doses of the 1960/70s, but also performing tasks that are considerably more difficult and hazardous than those original performed in these plants.Factors which influence RP safety culture in the workplace are examined, and proposals are considered for a series of actions that may lead to an improvement in RP culture with an associated reduction in dose in many work areas. These actions include methods to improve knowledge and awareness of radiation safety, plus ways to influence management and colleagues in the workplace. The exchange of knowledge about safety culture between the nuclear industry and medical areas may act to develop RP culture in both sectors, and have a wider impact in other sectors where exposures to ionising radiations can occur.

Project Success in Agile Development Software Projects

ERIC Educational Resources Information Center

Farlik, John T.

2016-01-01

Project success has multiple definitions in the scholarly literature. Research has shown that some scholars and practitioners define project success as the completion of a project within schedule and within budget. Others consider a successful project as one in which the customer is satisfied with the product. This quantitative study was conducted…

Development of the Consumer Refrigerator Safety Questionnaire: A Measure of Consumer Perceptions and Practices.

PubMed

Cairnduff, Victoria; Dean, Moira; Koidis, Anastasios

2016-09-01

Food preparation and storage behaviors in the home deviating from the "best practice" food safety recommendations may result in foodborne illnesses. Currently, there are limited tools available to fully evaluate the consumer knowledge, perceptions, and behavior in the area of refrigerator safety. The current study aimed to develop a valid and reliable tool in the form of a questionnaire, the Consumer Refrigerator Safety Questionnaire (CRSQ), for assessing systematically all these aspects. Items relating to refrigerator safety knowledge (n =17), perceptions (n =46), and reported behavior (n =30) were developed and pilot tested by an expert reference group and various consumer groups to assess face and content validity (n =20), item difficulty and consistency (n =55), and construct validity (n =23). The findings showed that the CRSQ has acceptable face and content validity with acceptable levels of item difficulty. Item consistency was observed for 12 of 15 in refrigerator safety knowledge. Further, all 5 of the subscales of consumer perceptions of refrigerator safety practices relating to risk of developing foodborne disease showed acceptable internal consistency (Cronbach's α value > 0.8). Construct validity of the CRSQ was shown to be very good (P = 0.022). The CRSQ exhibited acceptable test-retest reliability at 14 days with the majority of knowledge items (93.3%) and reported behavior items (96.4%) having correlation coefficients of greater than 0.70. Overall, the CRSQ was deemed valid and reliable in assessing refrigerator safety knowledge and behavior; therefore, it has the potential for future use in identifying groups of individuals at increased risk of deviating from recommended refrigerator safety practices, as well as the assessment of refrigerator safety knowledge and behavior for use before and after an intervention.

Development of a Nevada Statewide Database for Safety Analyst Software

DOT National Transportation Integrated Search

2017-02-02

Safety Analyst is a software package developed by the Federal Highway Administration (FHWA) and twenty-seven participating state and local agencies including the Nevada Department of Transportation (NDOT). The software package implemented many of the...

Interprofessional learning for medication safety.

PubMed

Hardisty, Jessica; Scott, Lesley; Chandler, Sarah; Pearson, Pauline; Powell, Suzanne

2014-07-01

Patient safety is a worldwide priority. Recommendations have been made that doctors, nurses and pharmacists could interact more effectively to improve patient outcomes, and that interprofessional education should be encouraged. In 2009, the North East Strategic Health Authority awarded Workforce Development Initiative funding to Northumbria Healthcare National Health Service (NHS) Foundation Trust to develop an undergraduate interprofessional training activity in medication safety for medicine, pharmacy and nursing students. Interprofessional seminars for medication safety and therapeutics were developed that were delivered across the North East of England. The initial seminars took place between January and April 2011 at 10 teaching hospitals, and were attended by over 400 students (from medicine, pharmacy and nursing). The majority of the workshops were facilitated by an interprofessional team comprised of pharmacists, doctors and nurses, with all students working in small groups with participants from each of the professional groups, where possible. All seminars had standardised materials, but it was up to individual facilitators to choose which of the five case studies were used within the seminar. The seminars lasted between 2 and 3 hours, and depending on which case studies were used, two or three cases could be discussed. Student feedback showed that the seminar was particularly successful in highlighting and improving the students' understanding of each other's roles and responsibilities in relation to medication safety. There are considerable organisational challenges in arranging interprofessional groups. Scenarios need to provide tasks that engage and challenge all of the professions involved. Facilitation is an important element. Interprofessional education should be encouraged. © 2014 John Wiley & Sons Ltd.

Development of a New Paenibacillin-Producing Strain and Testing its Usability in Improving Food Safety.

PubMed

Gerst, Michelle M; Huang, En; Zhang, Liwen; Yousef, Ahmed E

2015-07-01

A new bacterial strain that produces a bacteriocin (paenibacillin) without polymyxin was developed from Paenibacillus polymyxa that co-produces the 2 antimicrobial agents. Gamma radiation was used successfully to develop the new strain, P. polymyxa OSY-HG. Subsequently, we explored the feasibility of using food or food ingredients as growth media for the new strain. Milk supported the growth of P. polymyxa OSY-HG which produced up to 32 mg paenibacillin/L milk without polymyxin. Fermentation crude extract was applied in a model food (Vienna sausage) to control Listeria innocua, a Listeria monocytogenes surrogate. The treatment increased Listeria lag time by 2 d at 7 °C and at least 6 h at 37 °C. In conclusion, a new paenibacillin-producing P. polymyxa strain has been developed for potential industrial use. Using the new strain in applications that enhance food safety is feasible. As low concentrations of paenibacillin can inhibit Listeria in a food matrix, paenibacillin has potential to be used as a natural food preservative to deter this pathogen’s growth in food, after FDA approval. © 2015 Institute of Food Technologists®

Development and Validation of a Teacher Success Questionnaire Using the Rasch Model

ERIC Educational Resources Information Center

Tabatabaee-Yazdi, Mona; Motallebzadeh, Khalil; Ashraf, Hamid; Baghaei, Purya

2018-01-01

An increased enthusiasm on teacher accountability, in recent times, has led policy makers and teachers to a significant care over evaluating teachers' success. To this aim, a 40-item Teacher Success questionnaire was developed and validated by the application of the Rasch model. The Rasch model is used to decide whether the scores of an instrument…

Analysis of developed transition road safety barrier systems.

PubMed

Soltani, Mehrtash; Moghaddam, Taher Baghaee; Karim, Mohamed Rehan; Sulong, N H Ramli

2013-10-01

Road safety barriers protect vehicles from roadside hazards by redirecting errant vehicles in a safe manner as well as providing high levels of safety during and after impact. This paper focused on transition safety barrier systems which were located at the point of attachment between a bridge and roadside barriers. The aim of this study was to provide an overview of the behavior of transition systems located at upstream bridge rail with different designs and performance levels. Design factors such as occupant risk and vehicle trajectory for different systems were collected and compared. To achieve this aim a comprehensive database was developed using previous studies. The comparison showed that Test 3-21, which is conducted by impacting a pickup truck with speed of 100 km/h and angle of 25° to transition system, was the most severe test. Occupant impact velocity and ridedown acceleration for heavy vehicles were lower than the amounts for passenger cars and pickup trucks, and in most cases higher occupant lateral impact ridedown acceleration was observed on vehicles subjected to higher levels of damage. The best transition system was selected to give optimum performance which reduced occupant risk factors using the similar crashes in accordance with Test 3-21. Copyright © 2013 Elsevier Ltd. All rights reserved.

78 FR 52941 - Cooperative Research and Development Agreement: Next Generation Arctic Navigational Safety...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-27

... Development Agreement: Next Generation Arctic Navigational Safety Information System AGENCY: Coast Guard, DHS... technology approach to the ``Next Generation Arctic Maritime Navigational Safety Information System,'' which... their voyage risks, as they transit the remote and hostile waters of the U.S. Arctic Exclusive Economic...

Patient safety in phlebology: The ACP Phlebology Safety Checklist.

PubMed

Collares, Felipe Birchal; Sonde, Mehru; Harper, Kenneth; Armitage, Michael; Neuhardt, Diana L; Fronek, Helane S

2018-05-01

Objectives To assess the current use of safety checklists among the American College of Phlebology (ACP) members and their interest in implementing a checklist supported by the ACP on their clinical practices; and to develop a phlebology safety checklist. Method Online surveys were sent to ACP members, and a phlebology safety checklist was developed by a multispecialty team through the ACP Leadership Academy. Results Forty-seven percent of respondents are using a safety checklist in their practices; 23% think that a phlebology safety checklist would interfere or disrupt workflow; 79% answered that a phlebology safety checklist could improve procedure outcomes or prevent complications; and 85% would be interested in implementing a phlebology safety checklist approved by the ACP. Conclusion A phlebology safety checklist was developed with the intent to increase awareness on patient safety and improve outcome in phlebology practice.

Safety assessment of foods from genetically modified crops in countries with developing economies.

PubMed

Delaney, Bryan

2015-12-01

Population growth particularly in countries with developing economies will result in a need to increase food production by 70% by the year 2050. Biotechnology has been utilized to produce genetically modified (GM) crops for insect and weed control with benefits including increased crop yield and will also be used in emerging countries. A multicomponent safety assessment paradigm has been applied to individual GM crops to determine whether they as safe as foods from non-GM crops. This paper reviews methods to assess the safety of foods from GM crops for safe consumption from the first generation of GM crops. The methods can readily be applied to new products developed within country and this paper will emphasize the concept of data portability; that safety data produced in one geographic location is suitable for safety assessment regardless of where it is utilized. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

Aptamer-Based Analysis: A Promising Alternative for Food Safety Control

PubMed Central

Amaya-González, Sonia; de-los-Santos-Álvarez, Noemí; Miranda-Ordieres, Arturo J.; Lobo-Castañón, Maria Jesús

2013-01-01

Ensuring food safety is nowadays a top priority of authorities and professional players in the food supply chain. One of the key challenges to determine the safety of food and guarantee a high level of consumer protection is the availability of fast, sensitive and reliable analytical methods to identify specific hazards associated to food before they become a health problem. The limitations of existing methods have encouraged the development of new technologies, among them biosensors. Success in biosensor design depends largely on the development of novel receptors with enhanced affinity to the target, while being stable and economical. Aptamers fulfill these characteristics, and thus have surfaced as promising alternatives to natural receptors. This Review describes analytical strategies developed so far using aptamers for the control of pathogens, allergens, adulterants, toxins and other forbidden contaminants to ensure food safety. The main progresses to date are presented, highlighting potential prospects for the future. PMID:24287543

The development and validation of a psychological contract of safety scale.

PubMed

Walker, Arlene

2010-08-01

This paper builds on previous research by the author and describes the development and validation of a new measure of the psychological contract of safety. The psychological contract of safety is defined as the beliefs of individuals about reciprocal safety obligations inferred from implicit and explicit promises. A psychological contract is established when an individual believes that perceived employer and employee safety obligations are contingent on each other. A pilot test of the measure is first undertaken with participants from three different occupations: nurses, construction workers, and meat processing workers (N=99). Item analysis is used to refine the measure and provide initial validation of the scale. A larger validation study is then conducted with a participant sample of health care workers (N=424) to further refine the measure and to determine the psychometric properties of the scale. Item and correlational analyses produced the final employer and employee obligations scales, consisting of 21 and 17 items, respectively. Factor analyses identified two underlying dimensions in each scale comparable to that previously established in the organizational literature. These transactional and relational-type obligations provided construct validity of the scale. Internal consistency ratings using Cronbach's alpha found the components of the psychological contract of safety measure to be reliable. The refined and validated psychological contract of safety measure will allow investigation of the positive and negative outcomes associated with fulfilment and breach of the psychological contract of safety in future research. 2010 Elsevier Ltd. All rights reserved.

Recommendations for safety planning, data collection, evaluation and reporting during drug, biologic and vaccine development: a report of the safety planning, evaluation, and reporting team.

PubMed

Crowe, Brenda J; Xia, H Amy; Berlin, Jesse A; Watson, Douglas J; Shi, Hongliang; Lin, Stephen L; Kuebler, Juergen; Schriver, Robert C; Santanello, Nancy C; Rochester, George; Porter, Jane B; Oster, Manfred; Mehrotra, Devan V; Li, Zhengqing; King, Eileen C; Harpur, Ernest S; Hall, David B

2009-10-01

The Safety Planning, Evaluation and Reporting Team (SPERT) was formed in 2006 by the Pharmaceutical Research and Manufacturers of America. SPERT's goal was to propose a pharmaceutical industry standard for safety planning, data collection, evaluation, and reporting, beginning with planning first-in-human studies and continuing through the planning of the post-product-approval period. SPERT's recommendations are based on our review of relevant literature and on consensus reached in our discussions. An important recommendation is that sponsors create a Program Safety Analysis Plan early in development. We also give recommendations for the planning of repeated, cumulative meta-analyses of the safety data obtained from the studies conducted within the development program. These include clear definitions of adverse events of special interest and standardization of many aspects of data collection and study design. We describe a 3-tier system for signal detection and analysis of adverse events and highlight proposals for reducing "false positive" safety findings. We recommend that sponsors review the aggregated safety data on a regular and ongoing basis throughout the development program, rather than waiting until the time of submission. We recognize that there may be other valid approaches. The proactive approach we advocate has the potential to benefit patients and health care providers by providing more comprehensive safety information at the time of new product marketing and beyond.

[Evaluating training programs on occupational health and safety: questionnaire development].

PubMed

Zhou, Xiao-Yan; Wang, Zhi-Ming; Wang, Mian-Zhen

2006-03-01

To develop a questionnaire to evaluate the quality of training programs on occupational health and safety. A questionnaire comprising five subscales and 21 items was developed. The reliability and validity of the questionnaire was tested. Final validation of the questionnaire was undertaken in 700 workers in an oil refining company. The Cronbach's alpha coefficients of the five subscales ranged from 0.6194 to 0.6611. The subscale-scale Pearson correlation coefficients ranged from 0.568 to 0.834 . The theta coefficients of the five subscales were greater than 0.7. The factor loadings of the five subscales in the principal component analysis ranged from 0.731 to 0.855. Use of the questionnaire in the 700 workers produced a good discriminability, with excellent, good, fair and poor comprising 22.2%, 31.2%, 32.4% and 14.1 respectively. Given the fact that 18.7% of workers had never been trained and 29.7% of workers got one-off training only, the training program scored an average of 57.2. The questionnaire is suitable to be used in evaluating the quality of training programs on occupational health and safety. The oil refining company needs to improve training for their workers on occupational health and safety.

Development and psychometric testing of an instrument to measure safety climate perceptions in community pharmacy.

PubMed

Newham, Rosemary; Bennie, Marion; Maxwell, David; Watson, Anne; de Wet, Carl; Bowie, Paul

2014-12-01

A positive and strong safety culture underpins effective learning from patient safety incidents in health care, including the community pharmacy (CP) setting. To build this culture, perceptions of safety climate must be measured with context-specific and reliable instruments. No pre-existing instruments were specifically designed or suitable for CP within Scotland. We therefore aimed to develop a psychometrically sound instrument to measure perceptions of safety climate within Scottish CPs. The first stage, development of a preliminary instrument, comprised three steps: (i) a literature review; (ii) focus group feedback; and (iii) content validation. The second stage, psychometric testing, consisted of three further steps: (iv) a pilot survey; (v) a survey of all CP staff within a single health board in NHS Scotland; and (vi) application of statistical methods, including principal components analysis and calculation of Cronbach's reliability coefficients, to derive the final instrument. The preliminary questionnaire was developed through a process of literature review and feedback. This questionnaire was completed by staff in 50 CPs from the 131 (38%) sampled. 250 completed questionnaires were suitable for analysis. Psychometric evaluation resulted in a 30-item instrument with five positively correlated safety climate factors: leadership, teamwork, safety systems, communication and working conditions. Reliability coefficients were satisfactory for the safety climate factors (α > 0.7) and overall (α = 0.93). The robust nature of the technical design and testing process has resulted in the development of an instrument with sufficient psychometric properties, which can be implemented in the community pharmacy setting in NHS Scotland. © 2014 John Wiley & Sons, Ltd.

Latest developments in cryogenic safety

NASA Astrophysics Data System (ADS)

Webster, T. J.

1983-03-01

The Cryogenic Safety Manual, sponsored by the British Cryogenics Council, was published over 10 years ago. A new updated version is now available. Some general aspects of cryogenic safety are highlighted, and attention is drawn to some of the more unusual hazardous situations. An awareness of the physical properties of the cryogenic fluids being dealt with is important in directing attention to hazardous situations which may arise. Because of this, the more important properties of the cryogenic fluids are given, such as molecular weight, boiling point and freezing point. From these properties, hazardous situations can be deduced. There are hidden dangers that are not always easy to spot. Some of the unexpected hazards, most of which have led to deaths, are: asphyxiation (anoxia), frost bites and hypothermia, explosions, and combustion. The aim of this publication is to help bring about increased safety in the production and use of cryogenic products through a deeper appreciation of the scientific, technological and administrative steps which must be made if accidents, some fatal, are to be voided in the future.

Latest developments in cryogenic safety

NASA Technical Reports Server (NTRS)

Webster, T. J.

1983-01-01

The Cryogenic Safety Manual, sponsored by the British Cryogenics Council, was published over 10 years ago. A new updated version is now available. Some general aspects of cryogenic safety are highlighted, and attention is drawn to some of the more unusual hazardous situations. An awareness of the physical properties of the cryogenic fluids being dealt with is important in directing attention to hazardous situations which may arise. Because of this, the more important properties of the cryogenic fluids are given, such as molecular weight, boiling point and freezing point. From these properties, hazardous situations can be deduced. There are hidden dangers that are not always easy to spot. Some of the unexpected hazards, most of which have led to deaths, are: asphyxiation (anoxia), frost bites and hypothermia, explosions, and combustion. The aim of this publication is to help bring about increased safety in the production and use of cryogenic products through a deeper appreciation of the scientific, technological and administrative steps which must be made if accidents, some fatal, are to be voided in the future.

Developing safety performance functions incorporating reliability-based risk measures.

PubMed

Ibrahim, Shewkar El-Bassiouni; Sayed, Tarek

2011-11-01

Current geometric design guides provide deterministic standards where the safety margin of the design output is generally unknown and there is little knowledge of the safety implications of deviating from these standards. Several studies have advocated probabilistic geometric design where reliability analysis can be used to account for the uncertainty in the design parameters and to provide a risk measure of the implication of deviation from design standards. However, there is currently no link between measures of design reliability and the quantification of safety using collision frequency. The analysis presented in this paper attempts to bridge this gap by incorporating a reliability-based quantitative risk measure such as the probability of non-compliance (P(nc)) in safety performance functions (SPFs). Establishing this link will allow admitting reliability-based design into traditional benefit-cost analysis and should lead to a wider application of the reliability technique in road design. The present application is concerned with the design of horizontal curves, where the limit state function is defined in terms of the available (supply) and stopping (demand) sight distances. A comprehensive collision and geometric design database of two-lane rural highways is used to investigate the effect of the probability of non-compliance on safety. The reliability analysis was carried out using the First Order Reliability Method (FORM). Two Negative Binomial (NB) SPFs were developed to compare models with and without the reliability-based risk measures. It was found that models incorporating the P(nc) provided a better fit to the data set than the traditional (without risk) NB SPFs for total, injury and fatality (I+F) and property damage only (PDO) collisions. Copyright © 2011 Elsevier Ltd. All rights reserved.

A qualitative evaluation of fire safety education programs for older adults.

PubMed

Diekman, Shane T; Stewart, Tamara A; Teh, S Leesia; Ballesteros, Michael F

2010-03-01

This article presents a qualitative evaluation of six fire safety education programs for older adults delivered by public fire educators. Our main aims were to explore how these programs are implemented and to determine important factors that may lead to program success, from the perspectives of the public fire educators and the older adults. For each program, we interviewed the public fire educator(s), observed the program in action, and conducted focus groups with older adults attending the program. Analysis revealed three factors that were believed to facilitate program success (established relationships with the older adult community, rapport with older adult audiences, and presentation relevance) as well as three challenges (lack of a standardized curriculum and program implementation strategies, attendance difficulties, and physical limitations due to age). More fire safety education should be developed for older adult populations. For successful programs, public fire educators should address the specific needs of their local older adult community.

[Patient safety and errors in medicine: development, prevention and analyses of incidents].

PubMed

Rall, M; Manser, T; Guggenberger, H; Gaba, D M; Unertl, K

2001-06-01

"Patient safety" and "errors in medicine" are issues gaining more and more prominence in the eyes of the public. According to newer studies, errors in medicine are among the ten major causes of death in association with the whole area of health care. A new era has begun incorporating attention to a "systems" approach to deal with errors and their causes in the health system. In other high-risk domains with a high demand for safety (such as the nuclear power industry and aviation) many strategies to enhance safety have been established. It is time to study these strategies, to adapt them if necessary and apply them to the field of medicine. These strategies include: to teach people how errors evolve in complex working domains and how types of errors are classified; the introduction of critical incident reporting systems that are free of negative consequences for the reporters; the promotion of continuous medical education; and the development of generic problem-solving skills incorporating the extensive use of realistic simulators wherever possible. Interestingly, the field of anesthesiology--within which realistic simulators were developed--is referred to as a model for the new patient safety movement. Despite this proud track record in recent times though, there is still much to be done even in the field of anesthesiology. Overall though, the most important strategy towards a long-term improvement in patient safety will be a change of "culture" throughout the entire health care system. The "culture of blame" focused on individuals should be replaced by a "safety culture", that sees errors and critical incidents as a problem of the whole organization. The acceptance of human fallability and an open-minded non-punitive analysis of errors in the sense of a "preventive and proactive safety culture" should lead to solutions at the systemic level. This change in culture can only be achieved with a strong commitment from the highest levels of an organization. Patient

Can the Aviation Industry be Useful in Teaching Oncology about Safety?

PubMed

Davies, J M; Delaney, G

2017-10-01

Healthcare practitioners have long considered aviation as a domain from which much can be learned about safety. Over the past 30 years, attempts have been made to apply aviation safety-related concepts to healthcare. Although some applications have been successful, a few decades later, many healthcare safety experts have learned that the appeal of the aviation-healthcare analogy is an illusion. Both domains are so basically dissimilar that simple adoption of aviation concepts will not be successful. However, what has succeeded is healthcare's adaptation of specific aviation safety concepts. Three concepts, investment in safety, human factors and safety management systems, are described and examples are given of adapted applications to healthcare/clinical oncology. Finally, there is a need to ensure that these concepts are applied systematically throughout healthcare rather than sporadically and without a centralised mandate, to help ensure success and improved patient and provider safety. Copyright © 2017 The Royal College of Radiologists. Published by Elsevier Ltd. All rights reserved.

Safety performance functions incorporating design consistency variables.

PubMed

Montella, Alfonso; Imbriani, Lella Liana

2015-01-01

Highway design which ensures that successive elements are coordinated in such a way as to produce harmonious and homogeneous driver performances along the road is considered consistent and safe. On the other hand, an alignment which requires drivers to handle high speed gradients and does not meet drivers' expectancy is considered inconsistent and produces higher crash frequency. To increase the usefulness and the reliability of existing safety performance functions and contribute to solve inconsistencies of existing highways as well as inconsistencies arising in the design phase, we developed safety performance functions for rural motorways that incorporate design consistency measures. Since the design consistency variables were used only for curves, two different sets of models were fitted for tangents and curves. Models for the following crash characteristics were fitted: total, single-vehicle run-off-the-road, other single vehicle, multi vehicle, daytime, nighttime, non-rainy weather, rainy weather, dry pavement, wet pavement, property damage only, slight injury, and severe injury (including fatal). The design consistency parameters in this study are based on operating speed models developed through an instrumented vehicle equipped with a GPS continuous speed tracking from a field experiment conducted on the same motorway where the safety performance functions were fitted (motorway A16 in Italy). Study results show that geometric design consistency has a significant effect on safety of rural motorways. Previous studies on the relationship between geometric design consistency and crash frequency focused on two-lane rural highways since these highways have the higher crash rates and are generally characterized by considerable inconsistencies. Our study clearly highlights that the achievement of proper geometric design consistency is a key design element also on motorways because of the safety consequences of design inconsistencies. The design consistency measures

Software development for safety-critical medical applications

NASA Technical Reports Server (NTRS)

Knight, John C.

1992-01-01

There are many computer-based medical applications in which safety and not reliability is the overriding concern. Reduced, altered, or no functionality of such systems is acceptable as long as no harm is done. A precise, formal definition of what software safety means is essential, however, before any attempt can be made to achieve it. Without this definition, it is not possible to determine whether a specific software entity is safe. A set of definitions pertaining to software safety will be presented and a case study involving an experimental medical device will be described. Some new techniques aimed at improving software safety will also be discussed.

Reserve Li/SOC12 Battery Safety Testing

NASA Technical Reports Server (NTRS)

Dils, C. T.; Garoutte, K. F.

1984-01-01

A reserve Lithium/Thionyl Chloride Battery concept is developed and undergoing feasibility testing in terms of performance, safety and abusive conditions. The feasibility of employing a battery of this type to replace thermal batteries in certain applications is demonstrated. Excellent performance of a Li/SOCl2 reserve battery is obtained across the temperature range from 0 C to +44 C. Performance improvement over the thermal battery usage is greater by a factor of 3 when discharge time and energy density are compared. Performance over an expanded temperature range is also possible. Safety and abusive testing is accomplished successfully on a series of five units. Further performance improvements can be achieved with regard to battery weight and volume reductions.

Development and evaluation of a university campus-based food safety media campaign for young adults.

PubMed

Abbot, Jaclyn Maurer; Policastro, Peggy; Bruhn, Christine; Schaffner, Donald W; Byrd-Bredbenner, Carol

2012-06-01

Food safety information campaigns are more likely to be most effective if the messages are tailored to the needs of a specific audience. Designing effective campaigns involves careful study of the target population and working with them using a community-based participatory research model. Thus, the development of the campaign materials for a university campus-based food safety media campaign for young adults followed intense efforts of working with the target audience to gather the baseline data needed to characterize this audience, to identify the most salient messages for college students, and to create materials and events that would resonate with them. This campaign was implemented and evaluated on eight university campuses in the United States. The results indicate that the campaign significantly increased self-ratings of food safety knowledge and skill, actual food safety knowledge, food safety self-efficacy, stage of change for safe food handling, and reported hand washing behaviors of a geographically and racially diverse group of college students. The positive study outcomes support the value of engaging in these research and development efforts and reflect the usefulness of the audience-specific materials and activities developed for the campaign. The findings also demonstrate the versatility and utility of the materials on different campuses. Developing health media campaigns specifically for unique populations is key to ensuring health messages reach the target audience and, even more importantly, appeal to them. The detailed overview of the development of a food safety media campaign aimed at young adults presented in this article illustrates how health professionals can work with their target population to develop a focused, effective health promotion campaign.

Safety and Procedural Success of Left Atrial Appendage Exclusion With the Lariat Device: A Systematic Review of Published Reports and Analytic Review of the FDA MAUDE Database.

PubMed

Chatterjee, Saurav; Herrmann, Howard C; Wilensky, Robert L; Hirshfeld, John; McCormick, Daniel; Frankel, David S; Yeh, Robert W; Armstrong, Ehrin J; Kumbhani, Dharam J; Giri, Jay

2015-07-01

The Lariat device has received US Food and Drug Administration (FDA) 510(k) clearance for soft-tissue approximation and is being widely used off-label for left atrial appendage (LAA) exclusion. A comprehensive analysis of safety and effectiveness has not been reported. To perform a systematic review of published literature to assess safety and procedural success, defined as successful closure of the LAA during the index procedure, of the Lariat device. We performed a formal analytic review of the FDA MAUDE (Manufacturer and User Facility Device Experience) database to compile adverse event reports from real-world practice with the Lariat. For the systematic review, PubMed, EMBASE, CINAHL, and the Cochrane Library were searched from January 2007 through August 2014 to identify all studies reporting use of the Lariat device in 3 or more patients. The FDA MAUDE database was queried for adverse events reports related to Lariat use. Data were abstracted in duplicate by 2 physician reviewers. Events from published literature were pooled using a generic inverse variance weighting with a random effects model. Cumulative and individual adverse events were also reported using the FDA MAUDE data set. Procedural adverse events and procedural success. In the systematic review, 5 reports of Lariat device use in 309 participants were identified. Specific complications weighted for inverse of variance of individual studies were urgent need for cardiac surgery (2.3%; 7 of 309 procedures) and death (0.3%; 1 of 309 procedures). Procedural success was 90.3% (279 of 309 procedures). In the FDA MAUDE database, there were 35 unique reports of adverse events with use of the Lariat device. Among these, we identified 5 adverse event reports that noted pericardial effusion and death and an additional 23 reported urgent cardiac surgery without mention of death. This review of published reports and case reports identified risks of adverse events with off-label use of the Lariat device for LAA

Development of Food Safety Psychosocial Questionnaires for Young Adults

ERIC Educational Resources Information Center

Byrd-Bredbenner, C.; Wheatley, V.; Schaffner, D.; Bruhn, C.; Blalock, L.; Maurer, J.

2007-01-01

Food mishandling is thought to be more acute among young adults; yet little is known about why they may engage in risky food handling behaviors. The purpose of this study was to create valid, reliable instruments for assessing key food safety psychosocial measures. Development of the measures began by examining published studies and behavior…

Designing for sustained adoption: A model of developing educational innovations for successful propagation

NASA Astrophysics Data System (ADS)

Khatri, Raina; Henderson, Charles; Cole, Renée; Froyd, Jeffrey E.; Friedrichsen, Debra; Stanford, Courtney

2016-06-01

[This paper is part of the Focused Collection on Preparing and Supporting University Physics Educators.] The physics education research community has produced a wealth of knowledge about effective teaching and learning of college level physics. Based on this knowledge, many research-proven instructional strategies and teaching materials have been developed and are currently available to instructors. Unfortunately, these intensive research and development activities have failed to influence the teaching practices of many physics instructors. This paper describes interim results of a larger study to develop a model of designing materials for successful propagation. The larger study includes three phases, the first two of which are reported here. The goal of the first phase was to characterize typical propagation practices of education developers, using data from a survey of 1284 National Science Foundation (NSF) principal investigators and focus group data from eight disciplinary groups of NSF program directors. The goal of the second phase was to develop an understanding of successful practice by studying three instructional strategies that have been well propagated. The result of the first two phases is a tentative model of designing for successful propagation, which will be further validated in the third phase through purposeful sampling of additional well-propagated instructional strategies along with typical education development projects. We found that interaction with potential adopters was one of the key missing ingredients in typical education development activities. Education developers often develop a polished product before getting feedback, rely on mass-market communication channels for dissemination, and do not plan for supporting adopters during implementation. The tentative model resulting from this study identifies three key propagation activities: interactive development, interactive dissemination, and support of adopters. Interactive development

Patient safety: lessons learned.

PubMed

Bagian, James P

2006-04-01

The traditional approach to patient safety in health care has ranged from reticence to outward denial of serious flaws. This undermines the otherwise remarkable advances in technology and information that have characterized the specialty of medical practice. In addition, lessons learned in industries outside health care, such as in aviation, provide opportunities for improvements that successfully reduce mishaps and errors while maintaining a standard of excellence. This is precisely the call in medicine prompted by the 1999 Institute of Medicine report "To Err Is Human: Building a Safer Health System." However, to effect these changes, key components of a successful safety system must include: (1) communication, (2) a shift from a posture of reliance on human infallibility (hence "shame and blame") to checklists that recognize the contribution of the system and account for human limitations, and (3) a cultivation of non-punitive open and/or de-identified/anonymous reporting of safety concerns, including close calls, in addition to adverse events.

Office-based anesthesia: new frontiers, better outcomes, and emphasis on safety.

PubMed

Desai, Meena S

2008-12-01

Office-based anesthesia has grown and continues to grow very rapidly in the ever-changing medical environment. The demand of patients, surgeons and the evolving economic environment has set off a dynamic growth explosion. This explosion has created aggressive and tumultuous enhancements, some of which have been adapted well and some of which have led to disastrous results. As we institute rules and regulations to govern this 'wild west' of anesthesia, the landscape is set with some new guidelines that continue to evolve.Practice recommendations have been outlined for fire safety especially on patient fires. Closed claim studies offer valuable recommendations for MAC claims in the office based setting. Anesthesia Patient Safety Foundation and the ASA have outlined valuable information regarding the nonsilencing of equipment alarms.New equipment enhancements have generated successful mobile general anesthesia platforms. Finally, as we forge ahead we must construct measurements of our safety and success as outcome parameters are developed. The review of recent literature and technological advances has provided some valuable lessons in the evolution of patient safety and office based technology for the surgical office-based environment. As this specialty grows, measures of its outcome parameters will allow a gauge of performance.

Live attenuated vaccines: Historical successes and current challenges

DOE Office of Scientific and Technical Information (OSTI.GOV)

Minor, Philip D., E-mail: Philip.Minor@nibsc.org

Live attenuated vaccines against human viral diseases have been amongst the most successful cost effective interventions in medical history. Smallpox was declared eradicated in 1980; poliomyelitis is nearing global eradication and measles has been controlled in most parts of the world. Vaccines function well for acute diseases such as these but chronic infections such as HIV are more challenging for reasons of both likely safety and probable efficacy. The derivation of the vaccines used has in general not been purely rational except in the sense that it has involved careful clinical trials of candidates and subsequent careful follow up inmore » clinical use; the identification of the candidates is reviewed. - Highlights: • Live vaccines against human diseases caused by viruses have been very successful. • They have been developed by empirical clinical studies and problems identified in later use. • It can be difficult to balance ability to cause disease and ability to immunise for a strain. • There is currently no reliable basis for predicting success from pure virological studies. • Vaccinia, which eradicated smallpox, is the paradigm for all successes and issues.« less

A Review of Recent Advances in Perioperative Patient Safety.

PubMed

Fowler, Alexander J

2013-01-01

Major complications in surgery affect up to 16% of surgical procedures. Over the past 50 years, many patient safety initiatives have attempted to reduce such complications. Since the formation of the National Patient Safety Agency in 2001, there have been major advances in patient safety. Most recently, the production and implementation of the Surgical Safety Checklist by the World Health Organisation (WHO), a checklist ensuring that certain 'never events' (wrong-site surgery, wrong operation etc.) do not occur, irrespective of healthcare allowance. In this review, a summary of recent advances in patient safety are considered - including improvements in communication, understanding of human factors that cause mistakes, and strategies developed to minimise these. Additionally, the synthesis of best medical practice and harm minimisation is examined, with particular emphasis on communication and appreciation of human factors in the operating theatre. This is based on the resource management systems developed in other high risk industries (e.g. nuclear), and has also been adopted for other high risk medical areas. The WHO global movement to reduce surgical mortality has been highly successful, especially in the healthcare systems of developing nations where mortality reductions of up to 50% have been observed, and reductions in patient complications of 4%. Incident reporting has long been a key component of patient safety and continues to be so; allowing reflection and improved guideline formation. All patients are placed at risk in the surgical environment. It is crucial that this risk is minimised, whilst optimising the patient's outcome. In this review, recent advances in perioperative patient safety are examined and placed in context.

Risky play and children's safety: balancing priorities for optimal child development.

PubMed

Brussoni, Mariana; Olsen, Lise L; Pike, Ian; Sleet, David A

2012-08-30

Injury prevention plays a key role in keeping children safe, but emerging research suggests that imposing too many restrictions on children's outdoor risky play hinders their development. We explore the relationship between child development, play, and conceptions of risk taking with the aim of informing child injury prevention. Generational trends indicate children's diminishing engagement in outdoor play is influenced by parental and societal concerns. We outline the importance of play as a necessary ingredient for healthy child development and review the evidence for arguments supporting the need for outdoor risky play, including: (1) children have a natural propensity towards risky play; and, (2) keeping children safe involves letting them take and manage risks. Literature from many disciplines supports the notion that safety efforts should be balanced with opportunities for child development through outdoor risky play. New avenues for investigation and action are emerging seeking optimal strategies for keeping children "as safe as necessary," not "as safe as possible." This paradigm shift represents a potential for epistemological growth as well as cross-disciplinary collaboration to foster optimal child development while preserving children's safety.

Safety-I, Safety-II and Resilience Engineering.

PubMed

Patterson, Mary; Deutsch, Ellen S

2015-12-01

In the quest to continually improve the health care delivered to patients, it is important to understand "what went wrong," also known as Safety-I, when there are undesired outcomes, but it is also important to understand, and optimize "what went right," also known as Safety-II. The difference between Safety-I and Safety-II are philosophical as well as pragmatic. Improving health care delivery involves understanding that health care delivery is a complex adaptive system; components of that system impact, and are impacted by, the actions of other components of the system. Challenges to optimal care include regular, irregular and unexampled threats. This article addresses the dangers of brittleness and miscalibration, as well as the value of adaptive capacity and margin. These qualities can, respectively, detract from or contribute to the emergence of organizational resilience. Resilience is characterized by the ability to monitor, react, anticipate, and learn. Finally, this article celebrates the importance of humans, who make use of system capabilities and proactively mitigate the effects of system limitations to contribute to successful outcomes. Copyright © 2015 Mosby, Inc. All rights reserved.

Biotherapeutics in non-clinical development: Strengthening the interface between safety, pharmacokinetics-pharmacodynamics and manufacturing.

PubMed

Ulrich, Peter; Blaich, Guenter; Baumann, Andreas; Fagg, Rajni; Hey, Adam; Kiessling, Andrea; Kronenberg, Sven; Lindecrona, Rikke Hvid; Mohl, Silke; Richter, Wolfgang F; Tibbitts, Jay; Crameri, Flavio; Weir, Lucinda

2018-04-01

Biological drugs comprise a wide field of different modalities with respect to structure, pharmacokinetics and pharmacological function. Considerable non-clinical experience in the development of proteins (e.g. insulin) and antibodies has been accumulated over the past thirty years. In order to improve the efficacy and the safety of these biotherapeutics, Fc modifications (e.g. Fc silent antibody versions), combinations (antibody-drug conjugates, protein-nanoparticle combinations), and new constructs (darpins, fynomers) have been introduced. In the last decade, advanced therapy medicinal products (ATMPs) in research and development have become a considerable and strongly growing part of the biotherapeutic portfolio. ATMPs consisting of gene and cell therapy modalities or even combinations of them, further expand the level of complexity, which already exists in non-clinical development strategies for biological drugs and has thereby led to a further diversification of expertise in safety and PKPD assessment of biological drugs. It is the fundamental rationale of the BioSafe meetings, held yearly in the EU and in the US, to convene experts on a regular basis and foster knowledge exchange and mutual understanding in this fast growing area. In order to reflect at least partially the variety of the biotherapeutics field, the 2016 EU BioSafe meeting addressed the following topics in six sessions: (i) In vitro Meets in vivo to Leverage Biologics Development (ii) New developments and regulatory considerations in the cell and gene therapy field (iii) CMC Challenges with Biologics development (iv) Minipigs in non-clinical safety assessment (v) Opportunities of PKPD Assessment in Less Common Administration Routes In the breakout sessions the following questions were discussed: (i) Cynomolgus monkey as a reprotoxicology Species: Impact of Immunomodulators on Early Pregnancy Maintenance (ii) Safety Risk of Inflammation and Autoimmunity Induced by Immunomodulators (iii

Agricultural health and safety: incorporating the worker perspective.

PubMed

Liebman, Amy K; Augustave, Wilson

2010-07-01

This commentary offers a worker's perspective on agricultural health and safety and describes (1) the historical exemption of agriculture from regulatory oversight and barriers encountered due to lack of regulations and poor enforcement of the existing standards; (2) the effect of immigration status on worker protections; and (3) the basic desire for economic survival and how this impacts worker health and safety. The commentary describes two models to reduce hazards at work that illustrate how workers' perspectives can be incorporated successfully at the policy level and during the intervention development process and puts forth recommendations for employers, researchers, and funding agencies to facilitate the integration of workers' perspectives into occupational health and safety in agriculture. Ultimately, improved worker protection requires systemic policy and regulatory changes as well as strong enforcement of existing regulations. This commentary summarizes the presentation, "Ground View: Perspectives of Hired Workers," at the Agricultural Safety and Health Council of America/National Institute for Occupational Safety and Health conference, "Be Safe, Be Profitable: Protecting Workers in Agriculture," January 27-28, 2010, Dallas/Fort Worth, Texas.

Investments on Pro-poor Development Projects on Goats: Ensuring Success for Improved Livelihoods.

PubMed

Devendra, C

2013-01-01

The elements that determine the success of development projects on goats and the prerequisites for ensuring this are discussed in the context of the bewildering diversity of goat genetic resources, production systems, multifunctionality, and opportunities for responding to constraints for productivity enhancement. Key determinants for the success of pro-poor projects are the imperatives of realistic project design, resolution of priorities and positive impacts to increase investments and spur agricultural growth, and appropriate policy. Throughout the developing world, there exist 97% of the total world population of 921 million goats across all agro-ecological zones (AEZs), including 570 breeds and 64% share of the breeds. They occupy a very important biological and socio-economic niche in farming systems making significant multifunctional contributions especially to food, nutrition and financial security, stability of farm households, and survival of the poor in the rural areas. Definitions are given of successful and failed projects. The analyses highlighted in successful projects the value of strong participatory efforts with farmers and climate change. Climate change effects on goats are inevitable and are mediated through heat stress, type of AEZ, water availability, quantity and quality of the available feed resources and type of production system. Within the prevailing production systems, improved integrated tree crops - ruminant systems are underestimated and are an important pathway to enhance C sequestration. Key development strategies and opportunities for research and development (R and D) are enormous, and include inter alia defining a policy framework, resolution of priority constraints using systems perspectives and community-based participatory activities, application of yield-enhancing technologies, intensification, scaling up, and impacts. The priority for development concerns the rainfed areas with large concentrations of ruminants in which

The discovery and development of proteomic safety biomarkers for the detection of drug-induced liver toxicity.

PubMed

Amacher, David E

2010-05-15

biological fluids with varying immunoreactivity which can present bioanalytical challenges when first discovered. The potential success of these efforts is greatly enhanced by recent advances in two closely linked technologies, toxicoproteomics and targeted, quantitative mass spectrometry. This review focuses on the examination of the current status of these technologies as they relate to the discovery and development of novel preclinical biomarkers of hepatotoxicity. A critical assessment of the current literature reveals two distinct lines of safety biomarker investigation, (1) peripheral fluid biomarkers of organ toxicity and (2) tissue or cell-based toxicity signatures. Improved peripheral fluid biomarkers should allow the sensitive detection of potential organ toxicity prior to the onset of overt organ pathology. Advancements in tissue or cell-based toxicity biomarkers will provide sensitive in vitro or ex vivo screening systems based on toxicity pathway markers. An examination of the current practices in clinical pathology and the critical evaluation of some recently proposed biomarker candidates in comparison to the desired characteristics of an ideal toxicity biomarker lead this author to conclude that a combination of selected biomarkers will be more informative if not predictive of potential animal organ toxicity than any single biomarker, new or old. For the practical assessment of combinations of conventional and/or novel toxicity biomarkers in rodent and large animal preclinical species, mass spectrometry has emerged as the premier analytical tool compared to specific immunoassays or functional assays. Selected and multiple reaction monitoring mass spectrometry applications make it possible for this same basic technology to be used in the progressive stages of biomarker discovery, development, and more importantly, routine study applications without the use of specific antibody reagents. This technology combined with other "omics" technologies can provide added

Overcoming regulatory challenges in the development of companion diagnostics for monitoring and safety.

PubMed

Shimazawa, Rumiko; Ikeda, Masayuki

2016-03-01

Concurrent development and co-approval of a companion diagnostic (CDx) with a corresponding drug is ideal, but often unfeasible. Because of limited exposure to a drug in clinical trials, crucial information on safety is sometimes revealed only after approval. Therefore, a CDx for monitoring/safety is often developed after approval of a corresponding drug. However, regulatory guidance is insufficient if contemporaneous development is not possible, thereby leaving plenty of opportunities for improvement with respect to pharmacovigilance and retrospective validation of the CDx. Furthermore, global harmonization of guidance on how to incorporate new scientific information from retrospective analyses of biomarkers should lead to the establishment of more evidence for the development of CDx for approved drugs.

The ESA TTP and Recent Spin-off Successes

NASA Astrophysics Data System (ADS)

Raitt, D.; Brisson, P.

2002-01-01

In the framework of its research and development activities, the European Space Agency (ESA) spends some 250m each year and, recognizing the enormous potential of the know-how developed within its R&D activities, set up a Technology Transfer Programme (TTP) some twelve years ago. Over the years, the Programme has achieved some remarkable results with 120 successful transfers of space technologies to the non-space sector; over 120m received by companies making the technologies available; some 15 new companies established as a direct result of exploiting technologies; nearly 2500 jobs created or saved in Europe; and a portfolio of some 300 (out of over 600) active space technologies available for transfer and licencing. Some of the more recent technologies which have been successfully transferred to the non-space sector include the Mamagoose baby safety pyjamas; a spectrographic system being used to compare colours in fabrics and textiles; Earth observation technology employed to assess remotely how much agrochemicals are being used by farmers; and the Dutch solar car, Nuna, which, using European space technologies, finished first in the 2001 World Solar Challenge breaking all records. The paper will give a brief overview of the ESA Technology Transfer Programme and describe some of its recent successful technology transfers.

Collaborative Approaches in Developing Environmental and Safety Management Systems for Commercial Space Transportation

NASA Technical Reports Server (NTRS)

Zee, Stacey; Murray, D.

2009-01-01

The Federal Aviation Administration (FAA), Office of Commercial Space Transportation (AST) licenses and permits U.S. commercial space launch and reentry activities, and licenses the operation of non-federal launch and reentry sites. ASTs mission is to ensure the protection of the public, property, and the national security and foreign policy interests of the United States during commercial space transportation activities and to encourage, facilitate, and promote U.S. commercial space transportation. AST faces unique challenges of ensuring the protection of public health and safety while facilitating and promoting U.S. commercial space transportation. AST has developed an Environmental Management System (EMS) and a Safety Management System (SMS) to help meet its mission. Although the EMS and SMS were developed independently, the systems share similar elements. Both systems follow a Plan-Do-Act-Check model in identifying potential environmental aspects or public safety hazards, assessing significance in terms of severity and likelihood of occurrence, developing approaches to reduce risk, and verifying that the risk is reduced. This paper will describe the similarities between ASTs EMS and SMS elements and how AST is building a collaborative approach in environmental and safety management to reduce impacts to the environment and risks to the public.

An Evaluation of the Mississippi Recipes for Success Program from the Perspective of Child Nutrition Directors

ERIC Educational Resources Information Center

Bell, Chelsea; Lambert, Laurel; Chang, Yunhee; Carithers, Teresa

2017-01-01

Purpose/Objectives: The Mississippi Recipes for Success (MRS), a customizable selective menu system resource, was developed for child nutrition program (CNP) directors to comply with USDA nutrition regulations. The resource is available in printed and online formats and includes recipes, menu matrixes, food safety, and training materials for meal…

Introducing Development Education in Technical Universities: Successful Experiences in Spain

ERIC Educational Resources Information Center

Boni, A.; Perez-Foguet, A.

2008-01-01

This paper presents and analyses the main characteristics of successful experiences of Development Education (DE) introduced in two major Spanish Technical Universities (Technical University of Catalonia, TUC, and Technical University of Valencia, TUV) during the nineties and the beginning of the twenty-first century. In this paper, after a brief…

Community development--improving patient safety by enhancing the use of health services.

PubMed

Baum, Fran; Freeman, Toby; Lawless, Angela; Jolley, Gwyneth

2012-06-01

Community development plays an important role in increasing the access of disadvantaged groups to resources and services. We examined how community development in primary healthcare services may improve patient safety by involving people in activities that lead to their enhanced use of services. Audits of service activity and 68 in-depth interviews at six primary healthcare services in South Australia and the Northern Territory. Managers, practitioners and administration staff, plus regional health service executives and departmental funders participated in the interviews. Each of the services undertook some community development. Reported benefits included engaging people in health promoting activity, providing people with social contacts and, crucially, encouraging people to use health services. Community development is a means of engaging people who, for a range of reasons, are reluctant to use services and therefore can increase patient safety.

Assessment of cognitive safety in clinical drug development

PubMed Central

Roiser, Jonathan P.; Nathan, Pradeep J.; Mander, Adrian P.; Adusei, Gabriel; Zavitz, Kenton H.; Blackwell, Andrew D.

2016-01-01

Cognitive impairment is increasingly recognised as an important potential adverse effect of medication. However, many drug development programmes do not incorporate sensitive cognitive measurements. Here, we review the rationale for cognitive safety assessment, and explain several basic methodological principles for measuring cognition during clinical drug development, including study design and statistical analysis, from Phase I through to postmarketing. The crucial issue of how cognition should be assessed is emphasized, especially the sensitivity of measurement. We also consider how best to interpret the magnitude of any identified effects, including comparison with benchmarks. We conclude by discussing strategies for the effective communication of cognitive risks. PMID:26610416

Development, implementation and evaluation of a pedestrian safety zone for elderly pedestrians

DOT National Transportation Integrated Search

1998-02-01

The objectives of this study were to develop and apply procedures for defining pedestrian safety zones for the older (age 65+) adult and to develop, implement and evaluate a countermeasure program in the defined zones. Zone definition procedures were...

The likelihood of achieving quantified road safety targets: a binary logistic regression model for possible factors.

PubMed

Sze, N N; Wong, S C; Lee, C Y

2014-12-01

In past several decades, many countries have set quantified road safety targets to motivate transport authorities to develop systematic road safety strategies and measures and facilitate the achievement of continuous road safety improvement. Studies have been conducted to evaluate the association between the setting of quantified road safety targets and road fatality reduction, in both the short and long run, by comparing road fatalities before and after the implementation of a quantified road safety target. However, not much work has been done to evaluate whether the quantified road safety targets are actually achieved. In this study, we used a binary logistic regression model to examine the factors - including vehicle ownership, fatality rate, and national income, in addition to level of ambition and duration of target - that contribute to a target's success. We analyzed 55 quantified road safety targets set by 29 countries from 1981 to 2009, and the results indicate that targets that are in progress and with lower level of ambitions had a higher likelihood of eventually being achieved. Moreover, possible interaction effects on the association between level of ambition and the likelihood of success are also revealed. Copyright © 2014 Elsevier Ltd. All rights reserved.

Preoperative Safety Briefing Project

PubMed Central

DeFontes, James; Surbida, Stephanie

2004-01-01

Context: Increased media attention on surgical procedures that were performed on the wrong anatomic site or wrong patient has prompted the health care industry to identify and address human factors that lead to medical errors. Objective: To increase patient safety in the perioperative setting, our objective was to create a climate of improved communication, collaboration, team-work, and situational awareness while the surgical team reviewed pertinent information about the patient and the pending procedure. Methods: A team of doctors, nurses, and technicians used human factors principles to develop the Preoperative Safety Briefing for use by surgical teams, a briefing similar to the preflight checklist used by the airline industry. A six-month pilot of the briefing began in the Kaiser Permanente (KP) Anaheim Medical Center in February 2002. Four indicators of safety culture were used to measure success of the pilot: occurrence of wrong-site/wrong procedures, attitudinal survey data, near-miss reports, and nursing personnel turnover data. Results: Wrong-site surgeries decreased from 3 to 0 (300%) per year; employee satisfaction increased 19%; nursing personnel turnover decreased 16%; and perception of the safety climate in the operating room improved from “good” to “outstanding.” Operating suite personnel perception of teamwork quality improved substantially. Operating suite personnel perception of patient safety as a priority, of personnel communication, of their taking responsibility for patient safety, of nurse input being well received, of overall morale, and of medical errors being handled appropriately also improved substantially. Conclusions: Team members who work together and communicate well can quickly detect and more easily avoid errors. The Preoperative Safety Briefing is now standard in many operating suites in the KP Orange County Service Area. The concepts and design of this project are transferable, and similar projects are underway in the

Female Basketball Athlete Development Environment: Proposed Guidelines and Success Factors

ERIC Educational Resources Information Center

Folle, Alexandra; Vieira do Nascimento, Juarez; de Souza, Edison Roberto; Galatti, Larissa Rafaela; Graça, Amândio

2017-01-01

The aim of this study was to determine the guidelines and success factors of a sport club that contribute to the identification and development of female basketball athletes. The context investigated comprises a Brazilian club with strong tradition in the training of athletes and important sporting achievements in the sport. Data collection used…

Developing a model for hospital inherent safety assessment: Conceptualization and validation.

PubMed

Yari, Saeed; Akbari, Hesam; Gholami Fesharaki, Mohammad; Khosravizadeh, Omid; Ghasemi, Mohammad; Barsam, Yalda; Akbari, Hamed

2018-01-01

Paying attention to the safety of hospitals, as the most crucial institute for providing medical and health services wherein a bundle of facilities, equipment, and human resource exist, is of significant importance. The present research aims at developing a model for assessing hospitals' safety based on principles of inherent safety design. Face validity (30 experts), content validity (20 experts), construct validity (268 examples), convergent validity, and divergent validity have been employed to validate the prepared questionnaire; and the items analysis, the Cronbach's alpha test, ICC test (to measure reliability of the test), composite reliability coefficient have been used to measure primary reliability. The relationship between variables and factors has been confirmed at 0.05 significance level by conducting confirmatory factor analysis (CFA) and structural equations modeling (SEM) technique with the use of Smart-PLS. R-square and load factors values, which were higher than 0.67 and 0.300 respectively, indicated the strong fit. Moderation (0.970), simplification (0.959), substitution (0.943), and minimization (0.5008) have had the most weights in determining the inherent safety of hospital respectively. Moderation, simplification, and substitution, among the other dimensions, have more weight on the inherent safety, while minimization has the less weight, which could be due do its definition as to minimize the risk.

Neonatal Safety Information Reported to the FDA During Drug Development Studies

PubMed Central

Avant, Debbie; Baer, Gerri; Moore, Jason; Zheng, Panli; Sorbello, Alfred; Ariagno, Ron; Yao, Lynne; Burckart, Gilbert J.; Wang, Jian

2017-01-01

Background Relatively few neonatal drug development studies have been conducted, but an increase is expected with the enactment of the Food and Drug Administration Safety and Innovation Act (FDASIA). Understanding the safety of drugs studied in neonates is complicated by the unique nature of the population and the level of illness. The objective of this study was to examine neonatal safety data submitted to the FDA in studies pursuant to the Best Pharmaceuticals for Children Act (BPCA) and the Pediatric Research Equity Act (PREA) between 1998 and 2015. Methods FDA databases were searched for BPCA and/or PREA studies that enrolled neonates. Studies that enrolled a minimum of 3 neonates were analyzed for the presence and content of neonatal safety data. Results The analysis identified 40 drugs that were studied in 3 or more neonates. Of the 40 drugs, 36 drugs received a pediatric labeling change as a result of studies between 1998 and 2015, that included information from studies including neonates. Fourteen drugs were approved for use in neonates. Clinical trials for 20 of the drugs reported serious adverse events (SAEs) in neonates. The SAEs primarily involved cardiovascular events such as bradycardia and/or hypotension or laboratory abnormalities such as anemia, neutropenia, and electrolyte disturbances. Deaths were reported during studies of 9 drugs. Conclusions Our analysis revealed that SAEs were reported in studies involving 20 of the 40 drugs evaluated in neonates, with deaths identified in 9 of those studies. Patients enrolled in studies were often critically ill, which complicated determination of whether an adverse event was drug-related. We conclude that the traditional means for collecting safety information in drug development trials needs to be adjusted for neonates and will require the collaboration of regulators, industry, and the clinical and research communities to establish appropriate definitions and reporting strategies for the neonatal

Improving diabetic foot care in a nurse-managed safety-net clinic.

PubMed

Peterson, Joann M; Virden, Mary D

2013-05-01

This article is a description of the development and implementation of a Comprehensive Diabetic Foot Care Program and assessment tool in an academically affiliated nurse-managed, multidisciplinary, safety-net clinic. The assessment tool parallels parameters identified in the Task Force Foot Care Interest Group of the American Diabetes Association's report published in 2008, "Comprehensive Foot Examination and Risk Assessment." Review of literature, Silver City Health Center's (SCHC) 2009 Annual Report, retrospective chart review. Since the full implementation of SCHC's Comprehensive Diabetic Foot Care Program, there have been no hospitalizations of clinic patients for foot-related complications. The development of the Comprehensive Diabetic Foot Assessment tool and the implementation of the Comprehensive Diabetic Foot Care Program have resulted in positive outcomes for the patients in a nurse-managed safety-net clinic. This article demonstrates that quality healthcare services can successfully be developed and implemented in a safety-net clinic setting. ©2012 The Author(s) Journal compilation ©2012 American Association of Nurse Practitioners.

Aerospace Safety Advisory Panel

NASA Technical Reports Server (NTRS)

1992-01-01

The results of the Panel's activities are presented in a set of findings and recommendations. Highlighted here are both improvements in NASA's safety and reliability activities and specific areas where additional gains might be realized. One area of particular concern involves the curtailment or elimination of Space Shuttle safety and reliability enhancements. Several findings and recommendations address this area of concern, reflecting the opinion that safety and reliability enhancements are essential to the continued successful operation of the Space Shuttle. It is recommended that a comprehensive and continuing program of safety and reliability improvements in all areas of Space Shuttle hardware/software be considered an inherent component of ongoing Space Shuttle operations.

You can't improve what you don't measure: Safety climate measures available in the German-speaking countries to support safety culture development in healthcare.

PubMed

Manser, Tanja; Brösterhaus, Mareen; Hammer, Antje

2016-01-01

Safety climate measurement is a key input into safety culture development. The aim of this review is to provide an overview of the safety climate measures that have been evaluated for their psychometric properties in a German-speaking country and to make recommendations on how to use them in quality and patient safety improvement. A systematic search strategy was implemented to obtain relevant articles. PubMed and Web of Science databases were searched, and 128 abstracts were identified. After application of limits, 33 full texts were retrieved for subsequent evaluation. Studies were included on the basis of predetermined inclusion criteria and independent assessment by two reviewers. Publications were reviewed concerning healthcare setting, target group, safety culture dimensions covered and results of their psychometric evaluation. This review identified 11 instruments for safety climate assessment in different healthcare settings (i. e. hospitals, nursing homes, primary care, dental care and community pharmacy) for which acceptable to good internal consistency was reported. We observed wide variability concerning the number of dimensions (1 to 14; in some cases including outcome dimensions) and items (9 to 128) that the instruments were comprised of. Nevertheless, consistency with regard to the thematic areas covered was rather high. While there is clear evidence that we can assess safety climate in healthcare, the application of safety climate measures by quality and patient safety practitioners has so far been rather limited. This review bridges this gap between research and improvement practice by highlighting the central role of safety climate assessment in a mixed methods approach to inform safety culture development. Copyright © 2016. Published by Elsevier GmbH.

Using game technologies to improve the safety of construction plant operations.

PubMed

Guo, Hongling; Li, Heng; Chan, Greg; Skitmore, Martin

2012-09-01

Many accidents occur world-wide in the use of construction plant and equipment, and safety training is considered by many to be one of the best approaches to their prevention. However, current safety training methods/tools are unable to provide trainees with the hands-on practice needed. Game technology-based safety training platforms have the potential to overcome this problem in a virtual environment. One such platform is described in this paper - its characteristics are analysed and its possible contribution to safety training identified. This is developed and tested by means of a case study involving three major pieces of construction plant, which successfully demonstrates that the platform can improve the process and performance of the safety training involved in their operation. This research not only presents a new and useful solution to the safety training of construction operations, but illustrates the potential use of advanced technologies in solving construction industry problems in general. Copyright © 2011 Elsevier Ltd. All rights reserved.

Managing the Mars Science Laboratory Thermal Vacuum Test for Safety and Success

NASA Technical Reports Server (NTRS)

Evans, Jordan P.

2010-01-01

The Mars Science Laboratory is a NASA/JPL mission to send the next generation of rover to Mars. Originally slated for launch in 2009, development problems led to a delay in the project until the next launch opportunity in 2011. Amidst the delay process, the Launch/Cruise Solar Thermal Vacuum Test was undertaken as risk reduction for the project. With varying maturity and capabilities of the flight and ground systems, undertaking the test in a safe manner presented many challenges. This paper describes the technical and management challenges and the actions undertaken that led to the ultimate safe and successful execution of the test.

The development of regulatory expectations for computer-based safety systems for the UK nuclear programme

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hughes, P. J.; Westwood, R.N; Mark, R. T.

2006-07-01

The Nuclear Installations Inspectorate (NII) of the UK's Health and Safety Executive (HSE) has completed a review of their Safety Assessment Principles (SAPs) for Nuclear Installations recently. During the period of the SAPs review in 2004-2005 the designers of future UK naval reactor plant were optioneering the control and protection systems that might be implemented. Because there was insufficient regulatory guidance available in the naval sector to support this activity the Defence Nuclear Safety Regulator (DNSR) invited the NII to collaborate with the production of a guidance document that provides clarity of regulatory expectations for the production of safety casesmore » for computer based safety systems. A key part of producing regulatory expectations was identifying the relevant extant standards and sector guidance that reflect good practice. The three principal sources of such good practice were: IAEA Safety Guide NS-G-1.1 (Software for Computer Based Systems Important to Safety in Nuclear Power Plants), European Commission consensus document (Common Position of European Nuclear Regulators for the Licensing of Safety Critical Software for Nuclear Reactors) and IEC nuclear sector standards such as IEC60880. A common understanding has been achieved between the NII and DNSR and regulatory guidance developed which will be used by both NII and DNSR in the assessment of computer-based safety systems and in the further development of more detailed joint technical assessment guidance for both regulatory organisations. (authors)« less

The role of individual diligence in improving safety.

PubMed

Corbett, Angus; Travaglia, Jo; Braithwaite, Jeffrey

2011-01-01

This paper aims to be a theoretical examination of the role of individuals in sponsoring and facilitating effective, systemic change in organisations. Using reports of a number of high-profile initiatives to improve patient safety, it seeks to analyse the role of individual health care professionals in developing and facilitating new systems of care that improve safety and quality. The paper uses recent work in sociology that is concerned with the phenomenon of "sociological citizenship". The authors test whether successful initiators of change in health care can be described as sociological citizens. This notion of sociological citizens is applied to a number of highly successful initiatives to improve safety and quality to extrapolate the factors associated with individual clinician leadership, which may have affected the success of such endeavours. In each of the examples analysed the initiators of change can be characterised as sociological citizens. In reviewing the roles of these charismatic individuals it is evident that they see the relational interdependence between the individuals and organisations and that they use this information to achieve both professional and organisational objectives. The paper uses a case study method to investigate the usefulness of the role of sociological citizenship in interventions that aim to improve patient safety. The paper reviews the key concepts and uses of the concept of sociological citizenship to produce a framework against which the case studies were assessed. The authors suggest that a goal of policy for improving patient safety should be directed to the problem of how hospitals and health care organisations can create the conditions for encouraging the individual diligence and care that is needed to support reliable, safe health care practices. Improving the safety and quality of health care is an important public health initiative. It has also proven to be difficult to achieve sustained reductions in the harm

[Learning from errors: applying aviation safety concepts to medicine].

PubMed

Sommer, K-J

2012-11-01

Health care safety levels range below other complex industries. Civil aviation has throughout its history developed methods and concepts that have made the airplane into one of the safest means of mass transport. Key elements are accident investigations that focus on cause instead of blame, human-centered design of machinery and processes, continuous training of all personnel and a shared safety culture. These methods and concepts can basically be applied to medicine which has successfully been achieved in certain areas, however, a comprehensive implementation remains to be completed. This applies particularly to including the topic of safety into relevant curricula. Physicians are obliged by the oath"primum nil nocere" to act, but economic as well as political pressure will eventually confine professional freedom if initiative is not taken soon.

Development of an Instrument to Measure Student Use of Academic Success Skills: An Exploratory Factor Analysis

ERIC Educational Resources Information Center

Carey, John; Brigman, Greg; Webb, Linda; Villares, Elizabeth; Harrington, Karen

2014-01-01

This article describes the development of the Student Engagement in School Success Skills instrument including item development and exploratory factor analysis. The instrument was developed to measure student use of the skills and strategies identified as most critical for long-term school success that are typically taught by school counselors.

The development and test of urban and rural pedestrian safety messages

DOT National Transportation Integrated Search

1985-01-01

The objective of this project was to identify, develop and produce public education messages for pedestrian safety. Pedestrian accident types and situations which had not been previously addressed through public education were selected. These include...

[Safety culture in the context of work intensification--development in Germany over the last 10 years].

PubMed

Lauterberg, Jörg

2009-01-01

This article tries to review the development of patient safety culture in the German healthcare system over the last decade. Since the use of standardized questionnaires and other instruments to measure safety culture in Germany has only just begun there are no representative and longitudinal data. Therefore a set of indicators and clues is chosen to characterise the safety culture development on the micro-, meso- and macro-level of the healthcare system in four areas. Is patient safety an issue of the healthcare debates and especially of research? Have dedicated structures and processes been implemented to support clinical risk management? What are the objective outcomes of healthcare and treatment in regard to patient safety? In summary, there are a lot of signs that patient safety issues in Germany are gaining more and more importance on all levels of the healthcare system. To date there have been single evidence-based studies only indicating a causal or close temporal relationship between patient safety outcomes and the increasing efforts of hospitals, outpatient and long-term care facilities.

Methods for identifying high collision concentrations for identifying potential safety improvements : development of advanced type 2 safety performance functions.

DOT National Transportation Integrated Search

2016-06-30

This research developed advanced type 2 safety performance functions (SPF) for roadway segments, intersections and ramps on the entire Caltrans network. The advanced type 2 SPFs included geometrics, traffic volume and hierarchical random effects, whi...

Preparation, Development, and Transition of Learning-Disabled Students for Workforce Success

ERIC Educational Resources Information Center

Williams, Donna Elizabeth

2012-01-01

Preparation, Development, and Transition of Learning-Disabled Students for Workforce Success. Donna Elizabeth Williams, 2011: Applied Dissertation, Nova Southeastern University, Abraham S. Fischler School of Education. ERIC Descriptors: Learning Disabilities, Community Based Instruction, Academic Advising, Career Counseling, Career Planning. This…

A Model for Physician Leadership Development and Succession Planning.

PubMed

Dubinsky, Isser; Feerasta, Nadia; Lash, Rick

2015-01-01

Although the presence of physicians in formal leadership positions has often been limited to roles of department chiefs, MAC chairs, etc., a growing number of organizations are recruiting physicians to other leadership positions (e.g., VP, CEO) where their involvement is being genuinely sought and valued. While physicians have traditionally risen to leadership positions based on clinical excellence or on a rotational basis, truly effective physician leadership that includes competencies such as strategic planning, budgeting, mentoring, network development, etc., is essential to support organizational goals, improve performance and overall efficiency as well as ensuring the quality of care. In this context, the authors have developed a physician leader development and succession planning matrix and supporting toolkit to assist hospitals in identifying and nurturing the next generation of physician leaders.

Towards a U.S. Army Officer Corps Strategy for Success: Developing Talent

DTIC Science & Technology

2010-03-01

TOWARDS A U.S. ARMY OFFICER CORPS STRATEGY FOR SUCCESS: DEVELOPING TALENT Casey Wardynski David S . Lyle Michael J. Colarusso March 2010 The views...relationship between responsibility and for- mal developmental time, and sparse non-operational development opportunities are serious challenges that...and whether there is an effective relationship between its developmental and employment strategies. To succeed, Army officer development programs

Pediatric cardiovascular safety: challenges in drug and device development and clinical application.

PubMed

Bates, Katherine E; Vetter, Victoria L; Li, Jennifer S; Cummins, Susan; Aguel, Fernando; Almond, Christopher; Dubin, Anne M; Elia, Josephine; Finkle, John; Hausner, Elizabeth A; Joseph, Francesca; Karkowsky, Abraham M; Killeen, Matthew; Lemacks, Jodi; Mathis, Lisa; McMahon, Ann W; Pinnow, Ellen; Rodriguez, Ignacio; Stockbridge, Norman L; Stockwell, Margaret; Tassinari, Melissa; Krucoff, Mitchell W

2012-10-01

Development of pediatric medications and devices is complicated by differences in pediatric physiology and pathophysiology (both compared with adults and within the pediatric age range), small patient populations, and practical and ethical challenges to designing clinical trials. This article summarizes the discussions that occurred at a Cardiac Safety Research Consortium-sponsored Think Tank convened on December 10, 2010, where members from academia, industry, and regulatory agencies discussed important issues regarding pediatric cardiovascular safety of medications and cardiovascular devices. Pediatric drug and device development may use adult data but often requires additional preclinical and clinical testing to characterize effects on cardiac function and development. Challenges in preclinical trials include identifying appropriate animal models, clinically relevant efficacy end points, and methods to monitor cardiovascular safety. Pediatric clinical trials have different ethical concerns from adult trials, including consideration of the subjects' families. Clinical trial design in pediatrics should assess risks and benefits as well as incorporate input from families. Postmarketing surveillance, mandated by federal law, plays an important role in both drug and device safety assessment and becomes crucial in the pediatric population because of the limitations of premarketing pediatric studies. Solutions for this wide array of issues will require collaboration between academia, industry, and government as well as creativity in pediatric study design. Formation of various epidemiologic tools including registries to describe outcomes of pediatric cardiac disease and its treatment as well as cardiac effects of noncardiovascular medications, should inform preclinical and clinical development and improve benefit-risk assessments for the patients. The discussions in this article summarize areas of emerging consensus and other areas in which consensus remains elusive

Occupational safety and health criteria for responsible development of nanotechnology

NASA Astrophysics Data System (ADS)

Schulte, P. A.; Geraci, C. L.; Murashov, V.; Kuempel, E. D.; Zumwalde, R. D.; Castranova, V.; Hoover, M. D.; Hodson, L.; Martinez, K. F.

2014-01-01

Organizations around the world have called for the responsible development of nanotechnology. The goals of this approach are to emphasize the importance of considering and controlling the potential adverse impacts of nanotechnology in order to develop its capabilities and benefits. A primary area of concern is the potential adverse impact on workers, since they are the first people in society who are exposed to the potential hazards of nanotechnology. Occupational safety and health criteria for defining what constitutes responsible development of nanotechnology are needed. This article presents five criterion actions that should be practiced by decision-makers at the business and societal levels—if nanotechnology is to be developed responsibly. These include (1) anticipate, identify, and track potentially hazardous nanomaterials in the workplace; (2) assess workers' exposures to nanomaterials; (3) assess and communicate hazards and risks to workers; (4) manage occupational safety and health risks; and (5) foster the safe development of nanotechnology and realization of its societal and commercial benefits. All these criteria are necessary for responsible development to occur. Since it is early in the commercialization of nanotechnology, there are still many unknowns and concerns about nanomaterials. Therefore, it is prudent to treat them as potentially hazardous until sufficient toxicology, and exposure data are gathered for nanomaterial-specific hazard and risk assessments. In this emergent period, it is necessary to be clear about the extent of uncertainty and the need for prudent actions.

Predictors of nurses' acceptance of an intravenous catheter safety device.

PubMed

Rivers, Dianna Lipp; Aday, Lu Ann; Frankowski, Ralph F; Felknor, Sarah; White, Donna; Nichols, Brenda

2003-01-01

It is important to determine the factors that predict whether nurses accept and use a new intravenous (IV) safety device because there are approximately 800,000 needlesticks per year with the risk of contracting a life-threatening bloodborne disease such as HIV or hepatitis C. To determine the predictors of nurses' acceptance of the Protectiv Plus IV catheter safety needle device at a teaching hospital in Texas. A one-time cross-sectional survey of nurses (N = 742) was conducted using a 34-item questionnaire. A framework was developed identifying organizational and individual predictors of acceptance. The three principal dimensions of acceptance were (a) satisfaction with the device, (b) extent to which the device is always used, and (c) nurse recommendations over other safety devices. Measurements included developing summary subscales for the variables of safety climate and acceptance. Descriptive statistics and multiple linear and logistic regression models were computed. The findings showed widespread acceptance of the device. Nurses who had adequate training and a positive institutional safety climate were more accepting (p safety climate was positive and who had used the device for at least 6 months were more likely to use the device (p success in implementing IV safety programs, high quality training and an atmosphere of caring about nurse safety are required.

Safety evaluation methodology for advanced coal extraction systems

NASA Technical Reports Server (NTRS)

Zimmerman, W. F.

1981-01-01

Qualitative and quantitative evaluation methods for coal extraction systems were developed. The analysis examines the soundness of the design, whether or not the major hazards have been eliminated or reduced, and how the reduction would be accomplished. The quantitative methodology establishes the approximate impact of hazards on injury levels. The results are weighted by peculiar geological elements, specialized safety training, peculiar mine environmental aspects, and reductions in labor force. The outcome is compared with injury level requirements based on similar, safer industries to get a measure of the new system's success in reducing injuries. This approach provides a more detailed and comprehensive analysis of hazards and their effects than existing safety analyses.

Clinical Decision Support Knowledge Management: Strategies for Success.

PubMed

Khalifa, Mohamed; Alswailem, Osama

2015-01-01

Clinical Decision Support Systems have been shown to increase quality of care, patient safety, improve adherence to guidelines for prevention and treatment, and avoid medication errors. Such systems depend mainly on two types of content; the clinical information related to patients and the medical knowledge related to the specialty that informs the system rules and alerts. At King Faisal Specialist Hospital and Research Center, Saudi Arabia, the Health Information Technology Affairs worked on identifying best strategies and recommendations for successful CDSS knowledge management. A review of literature was conducted to identify main areas of challenges and factors of success. A qualitative survey was used over six months' duration to collect opinions, experiences and suggestions from both IT and healthcare professionals. Recommendations were categorized into ten main topics that should be addressed during the development and implementation of CDSS knowledge management tools in the hospital.

Investments on Pro-poor Development Projects on Goats: Ensuring Success for Improved Livelihoods*

PubMed Central

Devendra, C.

2013-01-01

The elements that determine the success of development projects on goats and the prerequisites for ensuring this are discussed in the context of the bewildering diversity of goat genetic resources, production systems, multifunctionality, and opportunities for responding to constraints for productivity enhancement. Key determinants for the success of pro-poor projects are the imperatives of realistic project design, resolution of priorities and positive impacts to increase investments and spur agricultural growth, and appropriate policy. Throughout the developing world, there exist 97% of the total world population of 921 million goats across all agro-ecological zones (AEZs), including 570 breeds and 64% share of the breeds. They occupy a very important biological and socio-economic niche in farming systems making significant multifunctional contributions especially to food, nutrition and financial security, stability of farm households, and survival of the poor in the rural areas. Definitions are given of successful and failed projects. The analyses highlighted in successful projects the value of strong participatory efforts with farmers and climate change. Climate change effects on goats are inevitable and are mediated through heat stress, type of AEZ, water availability, quantity and quality of the available feed resources and type of production system. Within the prevailing production systems, improved integrated tree crops - ruminant systems are underestimated and are an important pathway to enhance C sequestration. Key development strategies and opportunities for research and development (R and D) are enormous, and include inter alia defining a policy framework, resolution of priority constraints using systems perspectives and community-based participatory activities, application of yield-enhancing technologies, intensification, scaling up, and impacts. The priority for development concerns the rainfed areas with large concentrations of ruminants in which

SafetyAnalyst

DOT National Transportation Integrated Search

2009-01-01

This booklet provides an overview of SafetyAnalyst. SafetyAnalyst is a set of software tools under development to help State and local highway agencies advance their programming of site-specific safety improvements. SafetyAnalyst will incorporate sta...

Engineering and Development Program Plan, Aircraft Cabin Fire Safety.

DTIC Science & Technology

1980-06-01

relative to a postcrash fuel fire, or whether advanced materials provide a significant safety benefit in comparison to inservice materials. if either...have always been controlled by early detection and prompt extinguishment action by effectively trained crew members. In addition, the fire resistant...occupants. g. Develop a computer fire test data bank with broad user availability for inservice and candidate cabin interior materials. h. Identify

The Development of Project Orion Ground Safety Requirements

NASA Technical Reports Server (NTRS)

Kirkpatrick, Paul; Condzella, Bill; Williams, Jeff

2011-01-01

In spite of a very compressed schedule, Project Orion's AFT safety team was able to pull together a comprehensive set of ground safety requirements using existing requirements and subject matter experts. These requirements will serve as the basis for the design of GSE and ground operations. Using the above lessons as a roadmap, new Projects can produce the same results. A rigorous set of ground safety requirements is required to assure ground support equipment (GSE) and associated flight hardware ground operations are conducted safety

Software Safety Risk in Legacy Safety-Critical Computer Systems

NASA Technical Reports Server (NTRS)

Hill, Janice; Baggs, Rhoda

2007-01-01

Safety-critical computer systems must be engineered to meet system and software safety requirements. For legacy safety-critical computer systems, software safety requirements may not have been formally specified during development. When process-oriented software safety requirements are levied on a legacy system after the fact, where software development artifacts don't exist or are incomplete, the question becomes 'how can this be done?' The risks associated with only meeting certain software safety requirements in a legacy safety-critical computer system must be addressed should such systems be selected as candidates for reuse. This paper proposes a method for ascertaining formally, a software safety risk assessment, that provides measurements for software safety for legacy systems which may or may not have a suite of software engineering documentation that is now normally required. It relies upon the NASA Software Safety Standard, risk assessment methods based upon the Taxonomy-Based Questionnaire, and the application of reverse engineering CASE tools to produce original design documents for legacy systems.

[Development and succession of artificial biological soil crusts and water holding characteristics of topsoil].

PubMed

Wu, Li; Chen, Xiao-Guo; Zhang, Gao-Ke; Lan, Shu-Bin; Zhang, De-Lu; Hu, Chun-Xiang

2014-03-01

In order to understand the improving effects of cyanobacterial inoculation on water retention of topsoil in desert regions, this work focused on the development and succession of biological soil crusts and water holding characteristics of topsoil after cyanobacterial inoculation in Qubqi Desert. The results showed that after the artificial inoculation of desert cyanobacteria, algal crusts were quickly formed, and in some microenvironments direct succession of the algal crusts to moss crusts occurred after 2-3 years. With the development and succession of biological soil crusts, the topsoil biomass, polysaccharides content, crust thickness and porosity increased, while the soil bulk density decreased. At the same time, with crust development and succession, the topsoil texture became finer and the percents of fine soil particles including silt and clay contents increased, while the percents of coarse soil particles (sand content) decreased proportionately. In addition, it was found that with crust development and succession, the water holding capacity and water content of topsoil showed an increasing trend, namely: moss crust > algal crusts > shifting sand. The water content (or water holding capacity) in algal and moss crusts were 1.1-1.3 and 1.8-2.2 times of those in shifting sand, respectively. Correlation analysis showed that the water holding capacity and water content of topsoil were positively correlated with the crust biomass, polysaccharides content, thickness, bulk density, silt and clay content; while negatively correlated with the porosity and sand content. Furthermore, stepwise regression analysis showed that the main factor affecting water content was the clay content, while that affecting water holding capacity was the porosity.

Development of a Chlorine Dosing Strategy for Fresh Produce Washing Process to Maintain Microbial Food Safety and Minimize Residual Chlorine.

PubMed

Chen, Xi; Hung, Yen-Con

2018-06-01

The residual free chlorine level in fresh produce wash solution is closely correlated to the chemical and microbial safety of produce. Excess amount of free chlorine can quickly react with organic matters to form hazardous disinfection by-products (DBPs) above EPA-permitted levels, whereas deficiency of residual chlorine in produce wash solution may result in incompletely removing pathogens on produce. The purpose of this study was to develop a chlorine dosing strategy to optimize the chlorine dosage during produce washing process without impacting the microbial safety of fresh produce. Prediction equations were developed to estimate free chlorine needed to reach targeted residual chlorine at various sanitizer pH and organic loads, and then validated using fresh-cut iceberg lettuce and whole strawberries in an automated produce washer. Validation results showed that equations successfully predicted the initial chlorine concentration needed to achieve residual chlorine at 10, 30, 60, and 90 mg/L for both lettuce and strawberry washing processes, with the root mean squared error at 4.45 mg/L. The Escherichia coli O157:H7 reductions only slightly increased on iceberg lettuce and strawberries with residual chlorine increasing from 10 to 90 mg/L, indicating that lowering residual chlorine to 10 mg/L would not compromise the antimicrobial efficacy of chlorine-based sanitizer. Based on the prediction equations and E. coli O157:H7 reduction results, a chlorine dosing strategy was developed to help the produce industry to maintain microbial inactivation efficacy without adding excess amount of free chlorine. The chlorine dosing strategy can be used for fresh produce washing process to enhance the microbial food safety and minimize the DBPs formation potential. © 2018 Institute of Food Technologists®.

Sun Safety at Work Canada: a multiple case-study protocol to develop sun safety and heat protection programs and policies for outdoor workers.

PubMed

Kramer, Desre M; Tenkate, Thomas; Strahlendorf, Peter; Kushner, Rivka; Gardner, Audrey; Holness, D Linn

2015-07-10

CAREX Canada has identified solar ultraviolet radiation (UV) as the second most prominent carcinogenic exposure in Canada, and over 75 % of Canadian outdoor workers fall within the highest exposure category. Heat stress also presents an important public health issue, particularly for outdoor workers. The most serious form of heat stress is heat stroke, which can cause irreversible damage to the heart, lungs, kidneys, and liver. Although the need for sun and heat protection has been identified, there is no Canada-wide heat and sun safety program for outdoor workers. Further, no prevention programs have addressed both skin cancer prevention and heat stress in an integrated approach. The aim of this partnered study is to evaluate whether a multi-implementation, multi-evaluation approach can help develop sustainable workplace-specific programs, policies, and procedures to increase the use of UV safety and heat protection. This 2-year study is a theory-driven, multi-site, non-randomized study design with a cross-case analysis of 13 workplaces across four provinces in Canada. The first phase of the study includes the development of workplace-specific programs with the support of the intensive engagement of knowledge brokers. There will be a three-points-in-time evaluation with process and impact components involving the occupational health and safety (OHS) director, management, and workers with the goal of measuring changes in workplace policies, procedures, and practices. It will use mixed methods involving semi-structured key informant interviews, focus groups, surveys, site observations, and UV dosimetry assessment. Using the findings from phase I, in phase 2, a web-based, interactive, intervention planning tool for workplaces will be developed, as will the intensive engagement of intermediaries such as industry decision-makers to link to policymakers about the importance of heat and sun safety for outdoor workers. Solar UV and heat are both health and safety hazards

Development and application of a safety assessment methodology for waste disposals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Little, R.H.; Torres, C.; Schaller, K.H.

1996-12-31

As part of a European Commission funded research programme, QuantiSci (formerly the Environmental Division of Intera Information Technologies) and Instituto de Medio Ambiente of the Centro de Investigaciones Energeticas Medioambientales y Tecnologicas (IMA/CIEMAT) have developed and applied a comprehensive, yet practicable, assessment methodology for post-disposal safety assessment of land-based disposal facilities. This Safety Assessment Comparison (SACO) Methodology employs a systematic approach to the collection, evaluation and use of waste and disposal system data. It can be used to assess engineered barrier performance, the attenuating properties of host geological formations, and the long term impacts of a facility on the environmentmore » and human health, as well as allowing the comparison of different disposal options for radioactive, mixed and non-radioactive wastes. This paper describes the development of the methodology and illustrates its use.« less

Succession planning and leadership development: critical business strategies for healthcare organizations.

PubMed

Collins, Sandra K; Collins, Kevin S

2007-01-01

As labor shortages intensify, succession planning and leadership development have become strategic initiatives requiring rigorous consideration. Traditional methods of replacing personnel will not accommodate the vacancies expected to plague healthcare organizations. Managers should focus on identifying potential gaps of key personnel and adapting programs to accommodate organizational need. Attention should be placed on capturing the intellectual capital existent in the organization and developing diverse groups of leadership candidates.

Is Model-Based Development a Favorable Approach for Complex and Safety-Critical Computer Systems on Commercial Aircraft?

NASA Technical Reports Server (NTRS)

Torres-Pomales, Wilfredo

2014-01-01

A system is safety-critical if its failure can endanger human life or cause significant damage to property or the environment. State-of-the-art computer systems on commercial aircraft are highly complex, software-intensive, functionally integrated, and network-centric systems of systems. Ensuring that such systems are safe and comply with existing safety regulations is costly and time-consuming as the level of rigor in the development process, especially the validation and verification activities, is determined by considerations of system complexity and safety criticality. A significant degree of care and deep insight into the operational principles of these systems is required to ensure adequate coverage of all design implications relevant to system safety. Model-based development methodologies, methods, tools, and techniques facilitate collaboration and enable the use of common design artifacts among groups dealing with different aspects of the development of a system. This paper examines the application of model-based development to complex and safety-critical aircraft computer systems. Benefits and detriments are identified and an overall assessment of the approach is given.

Renovated Korean nuclear safety and security system: A review and suggestions to successful settlement

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chung, W. S.; Yun, S. W.; Lee, D. S.

2012-07-01

Questions of whether past nuclear regulatory body of Korea is not a proper system to monitor and check the country's nuclear energy policy and utilization have been raised. Moreover, a feeling of insecurity regarding nuclear safety after the nuclear accident in Japan has spread across the public. This has stimulated a renovation of the nuclear safety regime in Korea. The Nuclear Safety and Security Commission (NSSC) was launched on October 26, 2011 as a regulatory body directly under the President in charge of strengthening independence and nuclear safety. This was a meaningful event as the NSSC it is a muchmore » more independent regulatory system for Korea. However, the NSSC itself does not guarantee an enhanced public acceptance of the nuclear policy and stable use nuclear energy. This study introduces the new NSSC system and its details in terms of organization structure, appropriateness of specialty, budget stability, and management system. (authors)« less

ASAS Centennial Paper: Developments and future outlook for preharvest food safety.

PubMed

Oliver, S P; Patel, D A; Callaway, T R; Torrence, M E

2009-01-01

The last century of food animal agriculture is a remarkable triumph of scientific research. Knowledge derived through research has resulted in the development and use of new technologies that have increased the efficiency of food production and created a huge animal production and food manufacturing industry capable of feeding the US population while also providing significant quantities of high-quality food for export to other countries. Although the US food supply is among the safest in the world, the US Center for Disease Prevention and Control estimates that 76 million people get sick, more than 300,000 are hospitalized, and 5,000 die each year from foodborne illness. Consequently, preventing foodborne illness and death remains a major public health concern. Challenges to providing a safe, abundant, and nutritious food supply are complex because all aspects of food production, from farm to fork, must be considered. Given the national and international demand and expectations for food safety as well as the formidable challenges of producing and maintaining a safe food supply, food safety research and educational programs have taken on a new urgency. Remarkable progress has been made during the last century. Wisdom from a century of animal agriculture research now includes the realization that on-farm pathogens are intricately associated with animal health and well-being, the production of high-quality food, and profitability. In this review, some of the developments that have occurred over the last few decades are summarized, including types, sources, and concentrations of disease-causing pathogens encountered in food-producing animal environments and their association with food safety; current and future methods to control or reduce foodborne pathogens on the farm; and present and future preharvest food safety research directions. Future scientific breakthroughs will no doubt have a profound impact on animal agriculture and the production of high-quality food

Development of a highway safety fundamental course.

DOT National Transportation Integrated Search

2015-05-01

Although the need for road safety education was first recognized in the 1960s, it has become an increasingly urgent issue : in recent years. To fulfill the hefty goal set up by the AASHTO Highway Safety Strategy and by state DOTS, it is critical : to...

Profiles in Rural Economic Development: A Guidebook of Selected Successful Rural Area Initiatives.

ERIC Educational Resources Information Center

Thomas, Margaret G.

This guidebook presents 64 profiles of successful economic development initiatives in the small towns and rural areas of 37 states. Intended for use by rural and small town leaders and rural economic development specialists, the guide provides ideas, encouragement, and an "insider perspective" on alternative rural development strategies.…

MRI Evaluation and Safety in the Developing Brain

PubMed Central

Tocchio, Shannon; Kline-Fath, Beth; Kanal, Emanuel; Schmithorst, Vincent J.; Panigrahy, Ashok

2015-01-01

Magnetic resonance imaging (MRI) evaluation of the developing brain has dramatically increased over the last decade. Faster acquisitions and the development of advanced MRI sequences such as magnetic resonance spectroscopy (MRS), diffusion tensor imaging (DTI), perfusion imaging, functional MR imaging (fMRI), and susceptibility weighted imaging (SWI), as well as the use of higher magnetic field strengths has made MRI an invaluable tool for detailed evaluation of the developing brain. This article will provide an overview of the use and challenges associated with 1.5T and 3T static magnetic fields for evaluation of the developing brain. This review will also summarize the advantages, clinical challenges and safety concerns specifically related to MRI in the fetus and newborn, including the implications of increased magnetic field strength, logistics related to transporting and monitoring of neonates during scanning, sedation considerations and a discussion of current technologies such as MRI-conditional neonatal incubators and dedicated small-foot print neonatal intensive care unit (NICU) scanners. PMID:25743582

A web-based tool for the Comprehensive Unit-based Safety Program (CUSP).

PubMed

Pronovost, Peter J; King, Jay; Holzmueller, Christine G; Sawyer, Melinda; Bivens, Shauna; Michael, Michelle; Haig, Kathy; Paine, Lori; Moore, Dana; Miller, Marlene

2006-03-01

An organization's ability to change is driven by its culture, which in turn has a significant impact on safety. The six-step Comprehensive Unit-Based Safety Program (CUSP) is intended to improve local culture and safety. A Web-based project management tool for CUSP was developed and then pilot tested at two hospitals. HOW ECUSP WORKS: Once a patient safety concern is identified (step 3), a unit-level interdisciplinary safety committee determines issue criticality and starts up the projects (step 4), which are managed using project management tools within eCUSP (step 5). On a project's completion, the results are disseminated through a shared story (step 6). OSF St. Joseph's Medical Center-The Medical Birthing Center (Bloomington, Illinois), identified 11 safety issues, implemented 11 projects, and created 9 shared stories--including one for its Armband Project. The Johns Hopkins Hospital (Baltimore) Medical Progressive Care (MPC4) Unit identified 5 safety issues and implemented 4 ongoing projects, including the intravenous (IV) Tubing Compliance Project. The eCUSP tool's success depends on an organizational commitment to creating a culture of safety.

Barcode identification for transfusion safety.

PubMed

Murphy, M F; Kay, J D S

2004-09-01

Errors related to blood transfusion in hospitals may produce catastrophic consequences. This review addresses potential solutions to prevent patient misidentification including the use of new technology, such as barcoding. A small number of studies using new technology for the transfusion process in hospitals have shown promising results in preventing errors. The studies demonstrated improved transfusion safety and staff preference for new technology such as bedside handheld scanners to carry out pretransfusion bedside checking. They also highlighted the need for considerable efforts in the training of staff in the new procedures before their successful implementation. Improvements in hospital transfusion safety are a top priority for transfusion medicine, and will depend on a combined approach including a better understanding of the causes of errors, a reduction in the complexity of routine procedures taking advantage of new technology, improved staff training, and regular monitoring of practice. The use of new technology to improve the safety of transfusion is very promising. Further development of the systems is needed to enable staff to carry out bedside transfusion procedures quickly and accurately, and to increase their functionality to justify the cost of their wider implementation.

Applying Western Organization Development in China: Lessons from a Case of Success

ERIC Educational Resources Information Center

Wang, Jia

2010-01-01

Purpose: The purpose of this paper is to explore a successful case of a Chinese state-owned enterprise (SOE) as it applied western organization development (OD) approaches. Specifically, this study seeks to answer two questions: How has western organization development and change (OD/C) been applied in one Chinese SOE? and What lessons can be…

76 FR 6143 - Draft Guidance for Industry on “Target Animal Safety and Effectiveness Protocol Development and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-03

...] Draft Guidance for Industry on ``Target Animal Safety and Effectiveness Protocol Development and...) entitled ``Target Animal Safety and Effectiveness Protocol Development and Submission.'' The purpose of... Center for Veterinary Medicine (CVM), Office of New Animal Drug Evaluation (ONADE), to reduce the time to...

The roles and functions of safety professionals in Taiwan: Comparing the perceptions of safety professionals and safety educators.

PubMed

Wu, Tsung-Chih

2011-10-01

The perspectives of both internal and external members have to be considered when developing safety curricula. This study discusses perceptional differences between safety educators (SEs) and safety professionals (SPs) regarding the function of SPs. The findings will serve as a reference framework for the establishment of core safety competencies and the development of safety curricula for SPs. 248 respondents, including both SEs and SPs, completed self-administered questionnaires, which included the 45-item safety function scale (SFS). Nine factors were extracted from the scale using exploratory factor analysis (EFA), namely inspection and research, regulatory tasks, emergency procedures and settlement of damage, management and financial affairs, culture change, problem identification and analysis, developing and implementing solutions, knowledge management, and training and communications. Descriptive statistical results indicated that SPs and SEs hold differing views on the rank of the frequency of safety functions. MANOVA results indicated that SPs' perceptions of developing and implementing solutions, training and communications, inspection and research, and management and financial affairs were significantly higher than that of SEs. On the other hand, SE's perceptions regarding participation in regulatory tasks were significantly higher than those of SPs. Based on these results, the author suggests that a clear communication channel should be established between universities and industry to reduce the gap between the perceptions of SEs and SPs. The results of the study are statistically and practically significant. In addition to serving as a reference for the development of safety curricula, the results are also conducive to the establishment of SP roles and functions. Ultimately the development of more suitable safety curricula would open up employment competition for students who graduate from safety-related programs. SPs, on the other hand, can correctly

Facilitators: One Key Factor in Implementing Successful Experience-Based Training and Development Programs.

ERIC Educational Resources Information Center

Wagner, Richard J.; Roland, Christopher C.

An increasing number of corporations are using some form of experience-based outdoor training and development. Most of these programs follow a general process that includes: (1) introduction of the activity by the facilitator; (2) the experiential activity (during which the facilitator is observer or safety monitor); and (3) debriefing or…

Development of negative feedback during successive growth cycles of black cherry.

PubMed Central

Packer, Alissa; Clay, Keith

2004-01-01

Negative feedback between plant and soil microbial communities can be a key determinant of vegetation structure and dynamics. Previous research has shown that negative feedback between black cherry (Prunus serotina) and soil pathogens is strongly distance dependent. Here, we investigate the temporal dynamics of negative feedback. To examine short-term changes, we planted successive cycles of seedlings in the same soil. We found that seedling mortality increased steadily with growth cycle when sterile background soil was inoculated with living field soil but not in controls inoculated with sterilized field soil. To examine long-term changes, we quantified negative feedback across successive growth cycles in soil inoculated with living field soil from a mature forest system (more than 70 years old) versus a younger successional site (ca. 25 years old). In both cases negative feedback developed similarly. Our results suggest that negative feedback can develop very quickly in forest systems, at the spatial scale of a single seedling. PMID:15058444

A system to improve medication safety in the setting of acute kidney injury: initial provider response.

PubMed

McCoy, Allison B; McCoy, Allison Beck; Peterson, Josh F; Gadd, Cynthia S; Gadd, Cindy; Danciu, Ioana; Waitman, Lemuel R

2008-11-06

Clinical decision support systems can decrease common errors related to inappropriate or excessive dosing for nephrotoxic or renally cleared drugs. We developed a comprehensive medication safety intervention with varying levels of workflow intrusiveness within computerized provider order entry to continuously monitor for and alert providers about early-onset acute kidney injury. Initial provider response to the interventions shows potential success in improving medication safety and suggests future enhancements to increase effectiveness.

Recent Developments in Hyperspectral Imaging for Assessment of Food Quality and Safety

PubMed Central

Huang, Hui; Liu, Li; Ngadi, Michael O.

2014-01-01

Hyperspectral imaging which combines imaging and spectroscopic technology is rapidly gaining ground as a non-destructive, real-time detection tool for food quality and safety assessment. Hyperspectral imaging could be used to simultaneously obtain large amounts of spatial and spectral information on the objects being studied. This paper provides a comprehensive review on the recent development of hyperspectral imaging applications in food and food products. The potential and future work of hyperspectral imaging for food quality and safety control is also discussed. PMID:24759119

Succession Planning and Leadership Development for School Principals: Comparing English and South African Approaches

ERIC Educational Resources Information Center

Bush, Tony

2011-01-01

Succession planning has become increasingly important because of the shortage of headship applicants in England, and in many other countries. Leadership development is a central part of any succession planning strategy. This article compares the findings from two longitudinal studies, in England and South Africa, where the governments are seeking…

Studies on Labour Safety in Construction Sites

PubMed Central

Kanchana, S.; Sivaprakash, P.; Joseph, Sebastian

2015-01-01

Construction industry has accomplished extensive growth worldwide particularly in past few decades. For a construction project to be successful, safety of the structures as well as that of the personnel is of utmost importance. The safety issues are to be considered right from the design stage till the completion and handing over of the structure. Construction industry employs skilled and unskilled labourers subject to construction site accidents and health risks. A proper coordination between contractors, clients, and workforce is needed for safe work conditions which are very much lacking in Indian construction companies. Though labour safety laws are available, the numerous accidents taking place at construction sites are continuing. Management commitment towards health and safety of the workers is also lagging. A detailed literature study was carried out to understand the causes of accidents, preventive measures, and development of safe work environment. This paper presents the results of a questionnaire survey, which was distributed among various categories of construction workers in Kerala region. The paper examines and discusses in detail the total working hours, work shifts, nativity of the workers, number of accidents, and type of injuries taking place in small and large construction sites. PMID:26839916

Studies on Labour Safety in Construction Sites.

PubMed

Kanchana, S; Sivaprakash, P; Joseph, Sebastian

2015-01-01

Construction industry has accomplished extensive growth worldwide particularly in past few decades. For a construction project to be successful, safety of the structures as well as that of the personnel is of utmost importance. The safety issues are to be considered right from the design stage till the completion and handing over of the structure. Construction industry employs skilled and unskilled labourers subject to construction site accidents and health risks. A proper coordination between contractors, clients, and workforce is needed for safe work conditions which are very much lacking in Indian construction companies. Though labour safety laws are available, the numerous accidents taking place at construction sites are continuing. Management commitment towards health and safety of the workers is also lagging. A detailed literature study was carried out to understand the causes of accidents, preventive measures, and development of safe work environment. This paper presents the results of a questionnaire survey, which was distributed among various categories of construction workers in Kerala region. The paper examines and discusses in detail the total working hours, work shifts, nativity of the workers, number of accidents, and type of injuries taking place in small and large construction sites.

Investigating Information System Development, Behavior and Business Knowledge Impact on Project Success: Quantitative Analysis

ERIC Educational Resources Information Center

Skinner, Ann

2018-01-01

Resource-based theory provided the theoretical foundation to investigate the extent that developer knowledge correlated to success of information technology (IT) development projects. Literature indicated there was a knowledge gap in understanding whether developer information system development, behavior and business knowledge contributed to IT…

Participatory research and service-learning among farmers, health professional students, and experts: an agromedicine approach to farm safety and health.

PubMed

Guin, Susan M; Wheat, John R; Allinder, Russell S; Fanucchi, Gary J; Wiggins, Oscar S; Johnson, Gwendolyn J

2012-01-01

Agromedicine developments in Alabama rest heavily on the interest and support of the farm community. Participatory approaches have been advocated in order to impact the safety and health of farms. The University of Alabama Agromedicine Research Team, working closely with and guided by farmers, places emphasis on identifying areas of farmer concern related to agricultural health and safety and on developing jointly with the farmers plans to address their concerns. Agricultural extension agents were key to developing the trust relationships among farmers, health professionals, and extension personnel required for these successful agricultural safety and health developments. In this article the authors describe how the research team engaged farmers in participatory research to develop service learning activities for graduate students studying Agricultural Safety and Health at The University of Alabama. Accepting farmers' active role in research processes creates an environment that is favorable to change, while providing farmers reassurance that their health and safety is of utmost importance to the researchers.

Autonomous system for launch vehicle range safety

NASA Astrophysics Data System (ADS)

Ferrell, Bob; Haley, Sam

2001-02-01

The Autonomous Flight Safety System (AFSS) is a launch vehicle subsystem whose ultimate goal is an autonomous capability to assure range safety (people and valuable resources), flight personnel safety, flight assets safety (recovery of valuable vehicles and cargo), and global coverage with a dramatic simplification of range infrastructure. The AFSS is capable of determining current vehicle position and predicting the impact point with respect to flight restriction zones. Additionally, it is able to discern whether or not the launch vehicle is an immediate threat to public safety, and initiate the appropriate range safety response. These features provide for a dramatic cost reduction in range operations and improved reliability of mission success. .

Development of a patient safety climate survey for Chinese hospitals: cross-national adaptation and psychometric evaluation.

PubMed

Zhu, Junya; Li, Liping; Zhao, Hailei; Han, Guangshu; Wu, Albert W; Weingart, Saul N

2014-10-01

Existing patient safety climate instruments, most of which have been developed in the USA, may not accurately reflect the conditions in the healthcare systems of other countries. To develop and evaluate a patient safety climate instrument for healthcare workers in Chinese hospitals. Based on a review of existing instruments, expert panel review, focus groups and cognitive interviews, we developed items relevant to patient safety climate in Chinese hospitals. The draft instrument was distributed to 1700 hospital workers from 54 units in six hospitals in five Chinese cities between July and October 2011, and 1464 completed surveys were received. We performed exploratory and confirmatory factor analyses and estimated internal consistency reliability, within-unit agreement, between-unit variation, unit-mean reliability, correlation between multi-item composites, and association between the composites and two single items of perceived safety. The final instrument included 34 items organised into nine composites: institutional commitment to safety, unit management support for safety, organisational learning, safety system, adequacy of safety arrangements, error reporting, communication and peer support, teamwork and staffing. All composites had acceptable unit-mean reliabilities (≥0.74) and within-unit agreement (Rwg ≥0.71), and exhibited significant between-unit variation with intraclass correlation coefficients ranging from 9% to 21%. Internal consistency reliabilities ranged from 0.59 to 0.88 and were ≥0.70 for eight of the nine composites. Correlations between composites ranged from 0.27 to 0.73. All composites were positively and significantly associated with the two perceived safety items. The Chinese Hospital Survey on Patient Safety Climate demonstrates adequate dimensionality, reliability and validity. The integration of qualitative and quantitative methods is essential to produce an instrument that is culturally appropriate for Chinese hospitals

Closed medical negligence claims can drive patient safety and reduce litigation.

PubMed

Pegalis, Steven E; Bal, B Sonny

2012-05-01

Medical liability reform is viewed by many physician groups as a means of reducing medical malpractice litigation and lowering healthcare costs. However, alternative approaches such as closed medical negligence claims data may also achieve these goals. We asked whether information gleaned from closed claims related to medical negligence could promote patient safety and reduce costs related to medical liability. Specifically, we investigated whether physician groups have examined such data to identify error patterns and to then institute specific patient treatment protocols. We searched for medical societies that have systematically examined closed medical negligence claims in their specialty to develop specific standards of physician conduct. We then searched the medical literature for published evidence of the efficacy, if any, related to the patient safety measures thus developed. Anesthesia and obstetric physician societies have successfully targeted costs and related concerns arising from medical malpractice lawsuits by using data from closed claims to develop patient safety and treatment guidelines. In both specialties, after institution of safety measures derived from closed medical negligence claims, the incidence and costs related to medical malpractice decreased and physician satisfaction improved. Tort reform, in the form of legislatively prescribed limits on damages arising from lawsuits, is not the only means of addressing the incidence and costs related to medical malpractice litigation. As the experience of anesthesia and obstetric physicians has demonstrated, safety guidelines derived from analyzing past medical malpractice litigation can achieve the same goals while also promoting patient safety.

Focus on Success: An Explanatory Embedded Multiple-Case Study on How Youth Successfully Navigate Workforce Development Programs in Southern Nevada

ERIC Educational Resources Information Center

Villalobos, Ricardo

2017-01-01

This explanatory qualitative study investigated the perspectives of participant's and practitioner's perceived barriers to success and the necessary navigational expertise for overcoming the identified barriers. This multiple-case study research design examined three WIA out-of-school youth workforce development programs in Southern Nevada, with…

Leadership development and succession planning in case management.

PubMed

Miodonski, Kathleen; Hines, Patricia

2013-01-01

The director of case management is one of health care's leadership positions most frequently in demand. The lack of qualified and effective case management leaders will continue to be an issue for organizations for years to come, influenced by increasing pressures on health care reimbursement and the aging case management workforce. Organizations have an opportunity to create a program to develop future case management leaders from their internal talent. The proposed strategies are designed for the acute care hospital but also have applicability in other health care settings where there are case managers and a need for case management leadership. The business community offers leadership research and leadership development models with relevance to case management. Identifying and developing internal talent for leadership roles has been proven to be effective in preparation for advanced responsibilities, has a positive effect on staff morale, and minimizes the impact of vacant leadership positions during recruitment and onboarding activities. Creating a case management leadership development program for an organization can be an alternative to the process of external recruitment for case management department leaders. Such a program can be undertaken even in today's budget conscious environment by accessing existing resources in an organization in a creative and organized manner. The authors outline an approach for case management leaders to accept responsibility for succession planning and for case managers to accept responsibility for promoting their own career development through creation of a leadership development program.

Evaluating Managerial Styles for System Development Life Cycle Stages to Ensure Software Project Success

ERIC Educational Resources Information Center

Kocherla, Showry

2012-01-01

Information technology (IT) projects are considered successful if they are completed on time, within budget, and within scope. Even though, the required tools and methodologies are in place, IT projects continue to fail at a higher rate. Current literature lacks explanation for success within the stages of system development life-cycle (SDLC) such…

Clinical Development of Cell Therapies: Setting the Stage for Academic Success.

PubMed

Abou-El-Enein, M; Volk, H-D; Reinke, P

2017-01-01

Cellular therapies have potential to treat a wide range of diseases with autologous immunotherapies showing unprecedented therapeutic promise in clinical trials. Such therapies are mainly developed by academic researchers applying small-scale production, targeting rare and unmet medical needs. Here, we highlight the clinical translation of immunotherapy product in an academic setting, which may serve as a success model for early academic development of cell-based therapeutics. © 2016 American Society for Clinical Pharmacology and Therapeutics.

Measuring patient safety in a UK dental hospital: development of a dental clinical effectiveness dashboard.

PubMed

Pemberton, M N; Ashley, M P; Shaw, A; Dickson, S; Saksena, A

2014-10-01

Patient safety is an important marker of quality for any healthcare organisation. In 2008, the British Government white paper entitled High quality care for all, resulting from a review led by Lord Darzi, identified patient safety as a key component of quality and discussed how it might be measured, analysed and acted upon. National and local clinically curated metrics were suggested, which could be displayed via a 'clinical dashboard'. This paper explains the development of a clinical effectiveness dashboard focused on patient safety in an English dental hospital and how it has helped us identify relevant patient safety issues in secondary dental care.

Development and implementation of participant safety plans for international research with stigmatised populations.

PubMed

Sugarman, Jeremy; Barnes, Mark; Rose, Scott; Dumchev, Kostyantyn; Sarasvita, Riza; Viet, Ha Tran; Zeziulin, Oleksandr; Susami, Hepa; Go, Vivian; Hoffman, Irving; Miller, William C

2018-06-22

People who inject drugs with high-risk sharing practices have high rates of HIV transmission and face barriers to HIV care. Interventions to overcome these barriers are needed; however, stigmatisation of drug use and HIV infection leads to safety concerns during the planning and conduct of research on such interventions. In preparing to address concerns about safety and wellbeing of participants in an international research study, HIV Prevention Trials Network 074, we developed participant safety plans (PSPs) at each site to supplement local research ethics committee oversight, community engagement, and usual clinical trial procedures. The PSPs were informed by systematic local legal and policy assessments, and interviews with key stakeholders. After PSP refinement and implementation, we assessed social impacts at each study visit to ensure continued safety. Throughout the study, five participants reported a negative social impact, with three resulting from study participation. Future research with stigmatised populations should consider using and assessing this approach to enhance safety and welfare. Copyright © 2018 Elsevier Ltd. All rights reserved.

Total Quality Management and the System Safety Secretary

NASA Technical Reports Server (NTRS)

Elliott, Suzan E.

1993-01-01

The system safety secretary is a valuable member of the system safety team. As downsizing occurs to meet economic constraints, the Total Quality Management (TQM) approach is frequently adopted as a formula for success and, in some cases, for survival.

Development of an economic skill building intervention to promote women's safety and child development in Karachi, Pakistan.

PubMed

Hirani, Saima Shams; Karmaliani, Rozina; McFarlane, Judith; Asad, Nargis; Madhani, Farhana; Shehzad, Shireen; Ali, Nazbano Ahmed

2010-02-01

Violence against women is a global epidemic phenomenon that can result in major mental health problems. Not only are women affected but also the health and well-being of their children are in jeopardy. To prevent violence and promote women's safety, several strategies have been tested in various cultural contexts. This article describes the process of developing and validating an economic skill building intervention for women of an urban slum area of Karachi, Pakistan. The purpose of the intervention is to increase women's economic independence, promote women's safety, and improve the behavioral functioning of their children.

Safety management vs. picking leaves.

PubMed

Wright, D

1991-09-01

A safety program will generally have as its base a comprehensive written document made available for everyone in the organization. The document should indicate a positive commitment to safety by management. It should not be a "how to" guide, but rather a broad outline to establish responsibilities, goals, and methods. The safety manager is appointed in writing and answers to the highest level of management. As opposed to a "doer," the safety manager acts as a director and administrator of the safety program. This is accomplished through the advisory capacity of the safety program for solicited and unsolicited problems. The focus of the safety manager is on the system and how it contributes to safety problems, rather than individual problems. Management has the ultimate responsibility for safety. Their efforts should reflect a proactive attitude to correct problems in the system. In order to identify areas of interest, technically competent input from the safety manager should be required. The support of the safety program by top management determines the success of the program. Without a clear and firm commitment by the organization, safety will receive no more than lip service from the employees. The benefits of a proactive approach will be realized in the organization's ability to manage safety issues, rather than reacting to them.

Cases on Successful E-Learning Practices in the Developed and Developing World: Methods for the Global Information Economy

ERIC Educational Resources Information Center

Olaniran, Bolanle A., Ed.

2010-01-01

E-learning has become a significant aspect of training and education in the worldwide information economy as an attempt to create and facilitate a competent global work force. "Cases on Successful E-Learning Practices in the Developed and Developing World: Methods for the Global Information Economy" provides eclectic accounts of case…

Critical Success Factors: How One Multinational Company Develops Global E-Learning

ERIC Educational Resources Information Center

Nathan, Edward Pavel

2011-01-01

This research study examined how a multinational company determined what the critical success factors (CSFs) were for developing global e-learning. The study analyzed how these CSFs were grouped together to make their management more efficient. There were 21 participants in the study who were key stakeholders from the United States, Europe, Latin…

Establishment of minimal positive-control conditions to ensure brain safety during rapid development of emergency vaccines.

PubMed

Baek, Hyekyung; Kim, Kwang Ho; Park, Min Young; Kim, Kyeongryun; Ko, Bokyeong; Seo, Hyung Seok; Kim, Byoung Soo; Hahn, Tae-Wook; Yi, Sun Shin

2017-08-31

With the increase in international human and material exchanges, contagious and infectious epidemics are occurring. One of the effective methods of epidemic inhibition is the rapid development and supply of vaccines. Considering the safety of the brain during vaccine development is very important. However, manuals for brain safety assays for new vaccines are not uniform or effective globally. Therefore, the aim of this study is to establish a positive-control protocol for an effective brain safety test to enhance rapid vaccine development. The blood-brain barrier's tight junctions provide selective defense of the brain; however, it is possible to destroy these important microstructures by administering lipopolysaccharides (LPSs), thereby artificially increasing the permeability of brain parenchyma. In this study, test conditions are established so that the degree of brain penetration or brain destruction of newly developed vaccines can be quantitatively identified. The most effective conditions were suggested by measuring time-dependent expressions of tight junction biomarkers (zonula occludens-1 [ZO-1] and occludin) in two types of mice (C57BL/6 and ICR) following exposure to two types of LPS ( Salmonella and Escherichia ). In the future, we hope that use of the developed positive-control protocol will help speed up the determination of brain safety of novel vaccines.

Oxygen sensing for industrial safety - evolution and new approaches.

PubMed

Willett, Martin

2014-03-27

The requirement for the detection of oxygen in industrial safety applications has historically been met by electrochemical technologies based on the consumption of metal anodes. Products using this approach have been technically and commercially successful for more than three decades. However, a combination of new requirements is driving the development of alternative approaches offering fresh opportunities and challenges. This paper reviews some key aspects in the evolution of consumable anode products and highlights recent developments in alternative technologies aimed at meeting current and anticipated future needs in this important application.

Development and initial evaluation of the Clinical Information Systems Success Model (CISSM).

PubMed

Garcia-Smith, Dianna; Effken, Judith A

2013-06-01

Most clinical information systems (CIS) today are technically sound, but the number of successful implementations of these systems is low. The purpose of this study was to develop and test a theoretically based integrated CIS Success Model (CISSM) from the nurse perspective. Model predictors of CIS success were taken from existing research on information systems acceptance, user satisfaction, use intention, user behavior and perceptions, as well as clinical research. Data collected online from 234 registered nurses in four hospitals were used to test the model. Each nurse had used the Cerner Power Chart Admission Health Profile for at least 3 months. Psychometric testing and factor analysis of the 23-item CISSM instrument established its construct validity and reliability. Initial analysis showed nurses' satisfaction with and dependency on CIS use predicted their perceived CIS use Net Benefit. Further analysis identified Social Influence and Facilitating Conditions as other predictors of CIS user Net Benefit. The level of hospital CIS integration may account for the role of CIS Use Dependency in the success of CIS. Based on our experience, CISSM provides a formative as well as summative tool for evaluating CIS success from the nurse's perspective. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Risky Play and Children’s Safety: Balancing Priorities for Optimal Child Development

PubMed Central

Brussoni, Mariana; Olsen, Lise L.; Pike, Ian; Sleet, David A.

2012-01-01

Injury prevention plays a key role in keeping children safe, but emerging research suggests that imposing too many restrictions on children’s outdoor risky play hinders their development. We explore the relationship between child development, play, and conceptions of risk taking with the aim of informing child injury prevention. Generational trends indicate children’s diminishing engagement in outdoor play is influenced by parental and societal concerns. We outline the importance of play as a necessary ingredient for healthy child development and review the evidence for arguments supporting the need for outdoor risky play, including: (1) children have a natural propensity towards risky play; and, (2) keeping children safe involves letting them take and manage risks. Literature from many disciplines supports the notion that safety efforts should be balanced with opportunities for child development through outdoor risky play. New avenues for investigation and action are emerging seeking optimal strategies for keeping children “as safe as necessary,” not “as safe as possible.” This paradigm shift represents a potential for epistemological growth as well as cross-disciplinary collaboration to foster optimal child development while preserving children’s safety. PMID:23202675

Implementing evidence-based policy in a network setting: road safety policy in the Netherlands.

PubMed

Bax, Charlotte; de Jong, Martin; Koppenjan, Joop

2010-01-01

In the early 1990s, in order to improve road safety in The Netherlands, the Institute for Road Safety Research (SWOV) developed an evidence-based "Sustainable Safety" concept. Based on this concept, Dutch road safety policy, was seen as successful and as a best practice in Europe. In The Netherlands, the policy context has now changed from a sectoral policy setting towards a fragmented network in which safety is a facet of other transport-related policies. In this contribution, it is argued that the implementation strategy underlying Sustainable Safety should be aligned with the changed context. In order to explore the adjustments needed, two perspectives of policy implementation are discussed: (1) national evidence-based policies with sectoral implementation; and (2) decentralized negotiation on transport policy in which road safety is but one aspect. We argue that the latter approach matches the characteristics of the newly evolved policy context best, and conclude with recommendations for reformulating the implementation strategy.

Developing effective worker health and safety training materials: hazard awareness, identification, recognition, and control for the salon industry.

PubMed

Mayer, Annyce S; Brazile, William J; Erb, Samantha; Autenrieth, Daniel A; Serrano, Katherine; Van Dyke, Michael V

2015-05-01

In addition to formaldehyde, workers in salons can be exposed to other chemical irritants, sensitizers, carcinogens, reproductive hazards, infectious agents, ergonomic, and other physical hazards. Worker health and safety training is challenging because of current product labeling practices and the myriad of hazards portending risk for a wide variety of health effects. Through a Susan B. Harwood Targeted Topic Training grant from the Occupational Safety and Health Administration and assistance from salon development and training partners, we developed, delivered, and validated a health and safety training program using an iterative five-pronged approach. The training was well received and resulted in knowledge gain, improved workplace safety practices, and increased communication about health and safety. These training materials are available for download from the Occupational Safety and Health Administration's Susan B. Harwood Training Grant Program Web site.

Development and Validation of Career Development Guidelines by Task/Activity Analysis of Occupational Safety and Health Professions: Industrial Hygiene and Safety Professional. Final Report. Technical Report XII.

ERIC Educational Resources Information Center

Vernon, Ralph J.; And Others

This report summarizes research findings which resulted in development of curricula for occupational safety and health professions based on task/activity analyses and related performance objectives. The first seven chapters focus on the seven objectives. Chapter 1, Literature Review and Selection of Employers, concerns tasks required for…

MRI evaluation and safety in the developing brain.

PubMed

Tocchio, Shannon; Kline-Fath, Beth; Kanal, Emanuel; Schmithorst, Vincent J; Panigrahy, Ashok

2015-03-01

Magnetic resonance imaging (MRI) evaluation of the developing brain has dramatically increased over the last decade. Faster acquisitions and the development of advanced MRI sequences, such as magnetic resonance spectroscopy (MRS), diffusion tensor imaging (DTI), perfusion imaging, functional MR imaging (fMRI), and susceptibility-weighted imaging (SWI), as well as the use of higher magnetic field strengths has made MRI an invaluable tool for detailed evaluation of the developing brain. This article will provide an overview of the use and challenges associated with 1.5-T and 3-T static magnetic fields for evaluation of the developing brain. This review will also summarize the advantages, clinical challenges, and safety concerns specifically related to MRI in the fetus and newborn, including the implications of increased magnetic field strength, logistics related to transporting and monitoring of neonates during scanning, and sedation considerations, and a discussion of current technologies such as MRI conditional neonatal incubators and dedicated small-foot print neonatal intensive care unit (NICU) scanners. Copyright © 2015 Elsevier Inc. All rights reserved.

Infusing Reliability Techniques into Software Safety Analysis

NASA Technical Reports Server (NTRS)

Shi, Ying

2015-01-01

Software safety analysis for a large software intensive system is always a challenge. Software safety practitioners need to ensure that software related hazards are completely identified, controlled, and tracked. This paper discusses in detail how to incorporate the traditional reliability techniques into the entire software safety analysis process. In addition, this paper addresses how information can be effectively shared between the various practitioners involved in the software safety analyses. The author has successfully applied the approach to several aerospace applications. Examples are provided to illustrate the key steps of the proposed approach.

Dynamic dune management, integrating objectives of nature development and coastal safety: Examples from the Netherlands

NASA Astrophysics Data System (ADS)

Arens, Sebastiaan M.; Mulder, Jan P. M.; Slings, Quirinus L.; Geelen, Luc H. W. T.; Damsma, Petra

2013-10-01

sand to the system by sand nourishment; define a wide safety zone, which enables the transition zone of beach to foredunes to develop freely; reserve space for natural processes without restrictions; and stimulate natural redistribution of sand within the system and restore inland transport of sand by removing vegetation behind the foredunes. A long time scale (several decades) is needed for this approach to be successful.

From Concept to Commerce: Developing a Successful Fungal Endophyte Inoculant for Agricultural Crops

PubMed Central

Doohan, Fiona M.; Hodkinson, Trevor R.

2018-01-01

The development of endophyte inoculants for agricultural crops has been bedevilled by the twin problems of a lack of reliability and consistency, with a consequent lack of belief among end users in the efficacy of such treatments. We have developed a successful research pipeline for the production of a reliable, consistent and environmentally targeted fungal endophyte seed-delivered inoculant for barley cultivars. Our approach was developed de novo from an initial concept to source candidate endophyte inoculants from a wild relative of barley, Hordeum murinum (wall barley). A careful screening and selection procedure and extensive controlled environment testing of fungal endophyte strains, followed by multi-year field trials has resulted in the validation of an endophyte consortium suitable for barley crops grown on relatively dry sites. Our approach can be adapted for any crop or environment, provided that the set of first principles we have developed is followed. Here, we report how we developed the successful pipeline for the production of an economically viable fungal endophyte inoculant for barley cultivars. PMID:29439471

From Concept to Commerce: Developing a Successful Fungal Endophyte Inoculant for Agricultural Crops.

PubMed

Murphy, Brian R; Doohan, Fiona M; Hodkinson, Trevor R

2018-02-11

The development of endophyte inoculants for agricultural crops has been bedevilled by the twin problems of a lack of reliability and consistency, with a consequent lack of belief among end users in the efficacy of such treatments. We have developed a successful research pipeline for the production of a reliable, consistent and environmentally targeted fungal endophyte seed-delivered inoculant for barley cultivars. Our approach was developed de novo from an initial concept to source candidate endophyte inoculants from a wild relative of barley, Hordeum murinum (wall barley). A careful screening and selection procedure and extensive controlled environment testing of fungal endophyte strains, followed by multi-year field trials has resulted in the validation of an endophyte consortium suitable for barley crops grown on relatively dry sites. Our approach can be adapted for any crop or environment, provided that the set of first principles we have developed is followed. Here, we report how we developed the successful pipeline for the production of an economically viable fungal endophyte inoculant for barley cultivars.

Exploration of Successful Secondary Principals' Professional Development Experiences Framed within Transformational Leadership Theory

ERIC Educational Resources Information Center

Minix-Wilkins, Roxanne M.

2015-01-01

The purpose of this phenomenological study was to explore the professional development experiences of successful secondary principals framed within the practices of the transformational leadership theory. At this stage in the research, professional development will be generally defined as all of the types of training that the administrator…

Project safety as a sustainable competitive advantage.

PubMed

Rechenthin, David

2004-01-01

To be consistently profitable, a construction company must complete projects in scope, on schedule, and on budget. At the same time, the nature of the often high-risk work performed by construction companies can result in high accident rates. Clients and other stakeholders are placing increasing pressure on companies to decrease those accident rates. Clients routinely demand copies of safety plans and evidence of past results at the "pre-qualification" or "request for proposal" stages of the procurement process. Are high accident rates and the associated costs just a part of business? Companies that deliver on scope, schedule, and budget have a competitive advantage. Is it possible for projects with low accident rates to use it as a competitive advantage? Is the value added by safety just a temporary or parity issue, or does a successful safety program offer significant advantage to the company and the client? This article concludes that in the case of a high-risk industry, such as the construction industry, an organization with a successful safety program can promote safety performance as a sustainable competitive advantage. It is a choice the company can make.

Connected commercial vehicles — retrofit safety device kit project : safety applications and development plan.

DOT National Transportation Integrated Search

2014-03-01

Connected vehicle wireless data communications can enable safety applications that may reduce injuries and fatalities. Cooperative vehicle-to-vehicle (V2V) safety applications will be effective only if a high fraction of vehicles are equipped. Deploy...

Critical Success Factors: How One Multinational Company Develops Global E-Learning

ERIC Educational Resources Information Center

Nathan, Edward Pavel

2009-01-01

This research study examined how a multinational company determined what the critical success factors (CSFs) were for developing global e-learning. The study analyzed how these CSFs were grouped together in order to make their management more efficient. There were 21 participants in the study who were key stakeholders and came from one of four…

Software Safety Progress in NASA

NASA Technical Reports Server (NTRS)

Radley, Charles F.

1995-01-01

NASA has developed guidelines for development and analysis of safety-critical software. These guidelines have been documented in a Guidebook for Safety Critical Software Development and Analysis. The guidelines represent a practical 'how to' approach, to assist software developers and safety analysts in cost effective methods for software safety. They provide guidance in the implementation of the recent NASA Software Safety Standard NSS-1740.13 which was released as 'Interim' version in June 1994, scheduled for formal adoption late 1995. This paper is a survey of the methods in general use, resulting in the NASA guidelines for safety critical software development and analysis.

Conditions for the successful integration of Human and Organizational Factors (HOF) in the nuclear safety analysis.

PubMed

Tosello, Michèle; Lévêque, Françoise; Dutillieu, Stéphanie; Hernandez, Guillaume; Vautier, Jean-François

2012-01-01

This communication presents some elements which come from the experience feedback at CEA about the conditions for the successful integration of HOF in the nuclear safety analysis. To point out some of these conditions, one of the concepts proposed by Edgar Morin to describe the functioning of "complex" systems: the dialogical principle has been used. The idea is to look for some dialogical pairs. The elements of this kind of pair are both complementary and antagonist to one another. Three dialogical pairs are presented in this communication. The first two pairs are related to the organization of the HOF network and the last one is related to the methods which are used to analyse the working situations. The three pairs are: specialist - non-specialist actors of the network, centralized - distributed human resources in the network and microscopic - macroscopic levels of HOF methods to analyse the working situations. To continuously improve these three dialogical pairs, it is important to keep the differences which exist between the two elements of a pair and to find and maintain a balance between the two elements of the pairs.

Safety Characteristics in System Application of Software for Human Rated Exploration Missions for the 8th IAASS Conference

NASA Technical Reports Server (NTRS)

Mango, Edward J.

2016-01-01

NASA and its industry and international partners are embarking on a bold and inspiring development effort to design and build an exploration class space system. The space system is made up of the Orion system, the Space Launch System (SLS) and the Ground Systems Development and Operations (GSDO) system. All are highly coupled together and dependent on each other for the combined safety of the space system. A key area of system safety focus needs to be in the ground and flight application software system (GFAS). In the development, certification and operations of GFAS, there are a series of safety characteristics that define the approach to ensure mission success. This paper will explore and examine the safety characteristics of the GFAS development. The GFAS system integrates the flight software packages of the Orion and SLS with the ground systems and launch countdown sequencers through the 'agile' software development process. A unique approach is needed to develop the GFAS project capabilities within this agile process. NASA has defined the software development process through a set of standards. The standards were written during the infancy of the so-called industry 'agile development' movement and must be tailored to adapt to the highly integrated environment of human exploration systems. Safety of the space systems and the eventual crew on board is paramount during the preparation of the exploration flight systems. A series of software safety characteristics have been incorporated into the development and certification efforts to ensure readiness for use and compatibility with the space systems. Three underlining factors in the exploration architecture require the GFAS system to be unique in its approach to ensure safety for the space systems, both the flight as well as the ground systems. The first are the missions themselves, which are exploration in nature, and go far beyond the comfort of low Earth orbit operations. The second is the current exploration

Defensive efficacy interim design: Dynamic benefit/risk ratio view using probability of success.

PubMed

Tang, Zhongwen

2017-01-01

Traditional efficacy interim design is based on alpha spending which does not have intuitive interpretation and hence is difficult to communicate with non-statistician colleagues. The alpha-spending approach is based on efficacy alone and hence does not have the flexibility to incorporate newly emerged safety signal. Newly emerged safety signal may nullify the originally set efficacy boundary. In contrast, the probability of success (POS) concept has intuitive interpretation and hence can facilitate our communication with non-statistician colleagues and help to obtain health authority (HA) buying. The success criteria of POS are not restricted to statistical significance. Hence, POS has the capability to incorporate both efficacy and safety information. We propose to use POS and its credible interval to design efficacy interim. In the proposed method, the efficacy boundary is adjustable to offset newly emerged safety signal.

Improving patient safety and optimizing nursing teamwork using crew resource management techniques.

PubMed

West, Priscilla; Sculli, Gary; Fore, Amanda; Okam, Nwoha; Dunlap, Cleveland; Neily, Julia; Mills, Peter

2012-01-01

This project describes the application of the "sterile cockpit rule," a crew resource management (CRM) technique, targeted to improve efficacy and safety for nursing assistants in the performance of patient care duties. Crew resource management techniques have been successfully implemented in the aviation industry to improve flight safety. Application of these techniques can improve patient safety in medical settings. The Veterans Affairs (VA) National Center for Patient Safety conducted a CRM training program in select VA nursing units. One unit developed a novel application of the sterile cockpit rule to create protected time for certified nursing assistants (CNAs) while they collected vital signs and blood glucose data at the beginning of each shift. The typical nursing authority structure was reversed, with senior nurses protecting CNAs from distractions. This process led to improvements in efficiency and communication among nurses, with the added benefit of increased staff morale. Crew resource management techniques can be used to improve efficiency, morale, and patient safety in the healthcare setting.

Predictive models of safety based on audit findings: Part 1: Model development and reliability.

PubMed

Hsiao, Yu-Lin; Drury, Colin; Wu, Changxu; Paquet, Victor

2013-03-01

This consecutive study was aimed at the quantitative validation of safety audit tools as predictors of safety performance, as we were unable to find prior studies that tested audit validity against safety outcomes. An aviation maintenance domain was chosen for this work as both audits and safety outcomes are currently prescribed and regulated. In Part 1, we developed a Human Factors/Ergonomics classification framework based on HFACS model (Shappell and Wiegmann, 2001a,b), for the human errors detected by audits, because merely counting audit findings did not predict future safety. The framework was tested for measurement reliability using four participants, two of whom classified errors on 1238 audit reports. Kappa values leveled out after about 200 audits at between 0.5 and 0.8 for different tiers of errors categories. This showed sufficient reliability to proceed with prediction validity testing in Part 2. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

[Development and validation of the Korean patient safety culture scale for nursing homes].

PubMed

Yoon, Sook Hee; Kim, Byungsoo; Kim, Se Young

2013-06-01

The purpose of this study was to develop a tool to evaluate patient safety culture in nursing homes and to test its validity and reliability. A preliminary tool was developed through interviews with focus group, content validity tests, and a pilot study. A nationwide survey was conducted from February to April, 2011, using self-report questionnaires. Participants were 982 employees in nursing homes. Data were analyzed using Cronbach's alpha, item analysis, factor analysis, and multitrait/multi-Item analysis. From the results of the analysis, 27 final items were selected from 49 items on the preliminary tool. Items with low correlation with total scale were excluded. The 4 factors sorted by factor analysis contributed 63.4% of the variance in the total scale. The factors were labeled as leadership, organizational system, working attitude, management practice. Cronbach's alpha for internal consistency was .95 and the range for the 4 factors was from .86 to .93. The results of this study indicate that the Korean Patient Safety Culture Scale has reliability and validity and is suitable for evaluation of patient safety culture in Korean nursing homes.

Developing a disaster education program for community safety and resilience: The preliminary phase

NASA Astrophysics Data System (ADS)

Nifa, Faizatul Akmar Abdul; Abbas, Sharima Ruwaida; Lin, Chong Khai; Othman, Siti Norezam

2017-10-01

Resilience encompasses both the principles of preparedness and reaction within the dynamic systems and focuses responses on bridging the gap between pre-disaster activities and post-disaster intervention and among structural/non-structural mitigation. Central to this concept is the ability of the affected communities to recover their livelihood and inculcating necessary safety practices during the disaster and after the disaster strikes. While these ability and practices are important to improve the community safety and resilience, such factors will not be effective unless the awareness is present among the community. There have been studies conducted highlighting the role of education in providing awareness for disaster safety and resilience from a very young age. However for Malaysia, these area of research has not been fully explored and developed based on the specific situational and geographical factors of high-risk flood disaster locations. This paper explores the importance of disaster education program in Malaysia and develops into preliminary research project which primary aim is to design a flood disaster education pilot program in Kampung Karangan Primary School, Kelantan, Malaysia.

Critical Factors Analysis for Offshore Software Development Success by Structural Equation Modeling

NASA Astrophysics Data System (ADS)

Wada, Yoshihisa; Tsuji, Hiroshi

In order to analyze the success/failure factors in offshore software development service by the structural equation modeling, this paper proposes to follow two approaches together; domain knowledge based heuristic analysis and factor analysis based rational analysis. The former works for generating and verifying of hypothesis to find factors and causalities. The latter works for verifying factors introduced by theory to build the model without heuristics. Following the proposed combined approaches for the responses from skilled project managers of the questionnaire, this paper found that the vendor property has high causality for the success compared to software property and project property.

Traceability of Software Safety Requirements in Legacy Safety Critical Systems

NASA Technical Reports Server (NTRS)

Hill, Janice L.

2007-01-01

How can traceability of software safety requirements be created for legacy safety critical systems? Requirements in safety standards are imposed most times during contract negotiations. On the other hand, there are instances where safety standards are levied on legacy safety critical systems, some of which may be considered for reuse for new applications. Safety standards often specify that software development documentation include process-oriented and technical safety requirements, and also require that system and software safety analyses are performed supporting technical safety requirements implementation. So what can be done if the requisite documents for establishing and maintaining safety requirements traceability are not available?

Developing a Practical and Sustainable Faculty Development Program With a Focus on Teaching Quality Improvement and Patient Safety: An Alliance for Independent Academic Medical Centers National Initiative III Project.

PubMed

Rodrigue, Christopher; Seoane, Leonardo; Gala, Rajiv B; Piazza, Janice; Amedee, Ronald G

2012-01-01

Teaching the next generation of physicians requires more than traditional teaching models. The Accreditation Council for Graduate Medical Education's Next Accreditation System places considerable emphasis on developing a learning environment that fosters resident education in quality improvement and patient safety. The goal of this project was to develop a comprehensive and sustainable faculty development program with a focus on teaching quality improvement and patient safety. A multidisciplinary team representing all stakeholders in graduate medical education developed a validated survey to assess faculty and house officer baseline perceptions of their experience with faculty development opportunities, quality improvement tools and training, and resident participation in quality improvement and patient safety programs at our institution. We then developed a curriculum to address these 3 areas. Our pilot survey revealed a need for a comprehensive program to teach faculty and residents the art of teaching. Two other areas of need are (1) regular resident participation in quality improvement and patient safety efforts and (2) effective tools for developing skills and habits to analyze practices using quality improvement methods. Resident and faculty pairs in 17 Ochsner training programs developed and began quality improvement projects while completing the first learning module. Resident and faculty teams also have been working on the patient safety modules and incorporating aspects of patient safety into their individual work environments. Our team's goal is to develop a sustainable and manageable faculty development program that includes modules addressing quality improvement and patient safety in accordance with Accreditation Council for Graduate Medical Education accreditation requirements.

Safety Awareness & Communications Internship

NASA Technical Reports Server (NTRS)

Jefferson, Zanani

2015-01-01

The projects that I have worked on during my internships were updating the JSC Safety & Health Action Team JSAT Employee Guidebook, conducting a JSC mishap case study, preparing for JSC Today Close Call success stories, and assisting with event planning and awareness.

Safety of antiobesity drugs

PubMed Central

Cheung, Tommy Tsang; Samaranayake, Nithushi Rajitha

2013-01-01

Obesity is a major health problem worldwide. Although diet and physical activity are crucial in the management of obesity, the long-term success rate is low. Therefore antiobesity drugs are of great interest, especially when lifestyle modification has failed. As obesity is not an immediate life-threatening disease, these drugs are required to be safe. Antiobesity drugs that have been developed so far have limited efficacies and considerable adverse effects affecting tolerability and safety. Therefore, most antiobesity drugs have been withdrawn. Fenfluramine and dexfenfluramine were withdrawn because of the potential damage to heart valves. Sibutramine was associated with an increase in major adverse cardiovascular events in the Sibutramine Cardiovascular Outcomes (SCOUT) trial and it was withdrawn from the market in 2010. Rimonabant was withdrawn because of significant psychiatric adverse effects. Orlistat was approved in Europe and the United States for long-term treatment of obesity, but many patients cannot tolerate its gastrointestinal side effects. Phentermine and diethylpropion can only be used for less than 12 weeks because the long-term safety of these drugs is unknown. Ephedrine and caffeine are natural substances but the effects on weight reduction are modest. As a result there is a huge unmet need for effective and safe antiobesity drugs. Recently lorcaserin and topiramate plus phentermine have been approved for the treatment of obesity but long-term safety data are lacking. PMID:25114779

Product Engineering Class in the Software Safety Risk Taxonomy for Building Safety-Critical Systems

NASA Technical Reports Server (NTRS)

Hill, Janice; Victor, Daniel

2008-01-01

When software safety requirements are imposed on legacy safety-critical systems, retrospective safety cases need to be formulated as part of recertifying the systems for further use and risks must be documented and managed to give confidence for reusing the systems. The SEJ Software Development Risk Taxonomy [4] focuses on general software development issues. It does not, however, cover all the safety risks. The Software Safety Risk Taxonomy [8] was developed which provides a construct for eliciting and categorizing software safety risks in a straightforward manner. In this paper, we present extended work on the taxonomy for safety that incorporates the additional issues inherent in the development and maintenance of safety-critical systems with software. An instrument called a Software Safety Risk Taxonomy Based Questionnaire (TBQ) is generated containing questions addressing each safety attribute in the Software Safety Risk Taxonomy. Software safety risks are surfaced using the new TBQ and then analyzed. In this paper we give the definitions for the specialized Product Engineering Class within the Software Safety Risk Taxonomy. At the end of the paper, we present the tool known as the 'Legacy Systems Risk Database Tool' that is used to collect and analyze the data required to show traceability to a particular safety standard

Early microbial succession in re-developing dental biofilms in periodontal health and disease

PubMed Central

TELES, F.R.; TELES, R.P.; UZEL, N.G.; SONG, X.Q.; TORRESYAP, G.; SOCRANSKY, S.S.; HAFFAJEE, A.D.

2011-01-01

Objective To determine the order of bacterial species succession in re-developing supra and subgingival biofilms. Methods Supra and subgingival plaque samples were taken separately from 28 teeth in 38 healthy and 17 periodontitis subjects immediately after professional cleaning. Samples were taken again from 7 teeth in randomly selected quadrants after 1, 2, 4 and 7 days of no oral hygiene and analyzed using checkerboard DNA-DNA hybridization. % DNA probe counts were averaged within subjects at each time point. Ecological succession was determined using a modified moving window analysis. Results Succession in supragingival biofilms from periodontitis and health was similar. At 1 day, Streptococcus mitis and Neisseria mucosa showed increased proportions, followed by Capnocytophaga gingivalis, Eikenella corrodens, Veillonella parvula and Streptococcus oralis at 1–4 days. At 4–7 days, Campylobacter rectus, Campylobacter showae, Prevotella melaninogenica and Prevotella nigrescens became elevated. Subgingival plaque redevelopment was slower and very different from supragingival. Increased proportions were first observed for S. mitis, followed by V. parvula and C. gingivalis and, at 7 days by Capnocytophaga sputigena and P. nigrescens. No significant increase in proportions of periodontal pathogens was observed in any of the clinical groups or locations. Conclusions There is a defined order in bacterial species succession in early supra and subgingival biofilm re-development after professional cleaning. PMID:21895662

Development and validation of safety climate scales for mobile remote workers using utility/electrical workers as exemplar.

PubMed

Huang, Yueng-Hsiang; Zohar, Dov; Robertson, Michelle M; Garabet, Angela; Murphy, Lauren A; Lee, Jin

2013-10-01

The objective of this study was to develop and test the reliability and validity of a new scale designed for measuring safety climate among mobile remote workers, using utility/electrical workers as exemplar. The new scale employs perceived safety priority as the metric of safety climate and a multi-level framework, separating the measurement of organization- and group-level safety climate items into two sub-scales. The question of the emergence of shared perceptions among remote workers was also examined. For the initial survey development, several items were adopted from a generic safety climate scale and new industry-specific items were generated based on an extensive literature review, expert judgment, 15-day field observations, and 38 in-depth individual interviews with subject matter experts (i.e., utility industry electrical workers, trainers and supervisors of electrical workers). The items were revised after 45 cognitive interviews and a pre-test with 139 additional utility/electrical workers. The revised scale was subsequently implemented with a total of 2421 workers at two large US electric utility companies (1560 participants for the pilot company and 861 for the second company). Both exploratory (EFA) and confirmatory factor analyses (CFA) were adopted to finalize the items and to ensure construct validity. Reliability of the scale was tested based on Cronbach's α. Homogeneity tests examined whether utility/electrical workers' safety climate perceptions were shared within the same supervisor group. This was followed by an analysis of the criterion-related validity, which linked the safety climate scores to self-reports of safety behavior and injury outcomes (i.e., recordable incidents, missing days due to work-related injuries, vehicle accidents, and near misses). Six dimensions (Safety pro-activity, General training, Trucks and equipment, Field orientation, Financial Investment, and Schedule flexibility) with 29 items were extracted from the EFA to

Offshore safety case approach and formal safety assessment of ships.

PubMed

Wang, J

2002-01-01

Tragic marine and offshore accidents have caused serious consequences including loss of lives, loss of property, and damage of the environment. A proactive, risk-based "goal setting" regime is introduced to the marine and offshore industries to increase the level of safety. To maximize marine and offshore safety, risks need to be modeled and safety-based decisions need to be made in a logical and confident way. Risk modeling and decision-making tools need to be developed and applied in a practical environment. This paper describes both the offshore safety case approach and formal safety assessment of ships in detail with particular reference to the design aspects. The current practices and the latest development in safety assessment in both the marine and offshore industries are described. The relationship between the offshore safety case approach and formal ship safety assessment is described and discussed. Three examples are used to demonstrate both the offshore safety case approach and formal ship safety assessment. The study of risk criteria in marine and offshore safety assessment is carried out. The recommendations on further work required are given. This paper gives safety engineers in the marine and offshore industries an overview of the offshore safety case approach and formal ship safety assessment. The significance of moving toward a risk-based "goal setting" regime is given.

Development and Validation of a Short-Form Safety Net Medical Home Scale.

PubMed

Nocon, Robert S; Gunter, Kathryn E; Gao, Yue; Lee, Sang Mee; Chin, Marshall H

2017-12-01

To develop a short-form Safety Net Medical Home Scale (SNMHS) for assessing patient-centered medical home (PCMH) capability in safety net clinics. National surveys of federally qualified health centers (FQHCs). Interviews with FQHC directors. We constructed three short-form SNMHS versions and examined correlations with full SNMHS and related primary care assessments. We tested usability with FQHC directors and reviewed scale development with an advisory group. Federally qualified health center surveys were administered in 2009 and 2013, by mail and online. Usability testing was conducted through telephone interviews with FQHC directors in 2013. Six-, 12-, and 18-question short-form SNMHS versions had Pearson correlations with full scale of 0.84, 0.92, and 0.96, respectively. All versions showed a level of convergent validity with other primary care assessment scales comparable to the full SNMHS. User testers found short forms to be low-burden, though missing some PCMH concepts. Advisory group members expressed caution over missing concepts and appropriate use of short-form self-assessments. Short-form versions of SNMHS showed strong correlations with full scale and may be useful for brief assessment of safety net PCMH capability. Each short-form SNMHS version may be appropriate for different research, quality improvement, and assessment purposes. © Health Research and Educational Trust.

Safety sans Frontières: An International Safety Culture Model.

PubMed

Reader, Tom W; Noort, Mark C; Shorrock, Steven; Kirwan, Barry

2015-05-01

The management of safety culture in international and culturally diverse organizations is a concern for many high-risk industries. Yet, research has primarily developed models of safety culture within Western countries, and there is a need to extend investigations of safety culture to global environments. We examined (i) whether safety culture can be reliably measured within a single industry operating across different cultural environments, and (ii) if there is an association between safety culture and national culture. The psychometric properties of a safety culture model developed for the air traffic management (ATM) industry were examined in 17 European countries from four culturally distinct regions of Europe (North, East, South, West). Participants were ATM operational staff (n = 5,176) and management staff (n = 1,230). Through employing multigroup confirmatory factor analysis, good psychometric properties of the model were established. This demonstrates, for the first time, that when safety culture models are tailored to a specific industry, they can operate consistently across national boundaries and occupational groups. Additionally, safety culture scores at both regional and national levels were associated with country-level data on Hofstede's five national culture dimensions (collectivism, power distance, uncertainty avoidance, masculinity, and long-term orientation). MANOVAs indicated safety culture to be most positive in Northern Europe, less so in Western and Eastern Europe, and least positive in Southern Europe. This indicates that national cultural traits may influence the development of organizational safety culture, with significant implications for safety culture theory and practice. © 2015 Society for Risk Analysis.

Promoting the Development of Civic Responsibility: Infusing Service-Learning Practices in First-Year "Success" Courses

ERIC Educational Resources Information Center

Mayhew, Matthew J.; Engberg, Mark E.

2011-01-01

The purpose of this study was to examine whether first-year success courses that conceptually integrated a serving-learning component influenced the development of civic responsibility, operationally defined as charitable and social justice responsibility. We longitudinally assessed 173 students enrolled in 10 first-year success courses, 5 with…

January, 2018 Mission Success is in Our Hands.

NASA Image and Video Library

2018-01-18

Vernon "Bill" Wessel, former associate director of NASA's Glenn Research Center from 2006-2011, addresses team members at NASA's Marshall Space Flight Center Jan. 19 as part of the "Mission Success in in Our Hands" Shared Experiences forum. Wessel, currently senior vice president of Ares Corp. and deputy of the Huntsville-based company's Space & Defense Division, spoke about his 30-year NASA career and the importance of workplace safety. "Keep in your head every day and in every way that safety is number one," he said. "When you meet people, ask them, 'How are you doing today? How's the job? How are you staying safe?' These are the things that are important." The bimonthly Shared Experiences forum, a Marshall safety initiative to promote and strengthen mission assurance and flight safety, is sponsored by NASA partner Jacobs Engineering of Huntsville.

Roadmap to risk evaluation and mitigation strategies (REMS) success

PubMed Central

Balian, John D.; Malhotra, Rachpal; Perentesis, Valerie

2010-01-01

Medical safety-related risk management is a rapidly evolving and increasingly important aspect of drug approval and market longevity. To effectively meet the challenges of this new era, we describe a risk management roadmap that proactively yet practically anticipates risk-management requirements, provides the foundation for enduring yet appropriately flexible risk-management practices, and leverages these techniques to efficiently and effectively utilize risk evaluation and mitigation strategies (REMS)/risk minimization programs as market access enablers. This fully integrated risk-management paradigm creates exciting opportunities for newer tools, techniques, and approaches to more successfully optimize product development, approval, and commercialization, with patients as the ultimate beneficiaries. PMID:25083193

IOT for Agriculture: Food Quality and Safety

NASA Astrophysics Data System (ADS)

Witjaksono, Gunawan; Abdelkreem Saeed Rabih, Almur; Yahya, Noorhana bt; Alva, Sagir

2018-03-01

Food is the main energy source for the living beings; as such food quality and safety have been in the highest demand throughout the human history. Internet of things (IOT) is a technology with a vision to connect anything at anytime and anywhere. Utilizing IOT in the food supply chain (FSC) is believed to enhance the quality of life by tracing and tracking the food conditions and live-sharing the obtained data with the consumers or the FSC supervisors. Currently, full application of IOT in the FSC is still in the developing stage and there is a big gap for improvements. The purpose of this paper is to explore the possibility of applying IOT for agriculture to trace and track food quality and safety. Mobile application for food freshness investigation was successfully developed and the results showed that consumer mobile camera could be used to test the freshness of food. By applying the IOT technology this information could be shared with all the consumers and also the supervisors.

CRITICALITY SAFETY CONTROLS AND THE SAFETY BASIS AT PFP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kessler, S

2009-04-21

With the implementation of DOE Order 420.1B, Facility Safety, and DOE-STD-3007-2007, 'Guidelines for Preparing Criticality Safety Evaluations at Department of Energy Non-Reactor Nuclear Facilities', a new requirement was imposed that all criticality safety controls be evaluated for inclusion in the facility Documented Safety Analysis (DSA) and that the evaluation process be documented in the site Criticality Safety Program Description Document (CSPDD). At the Hanford site in Washington State the CSPDD, HNF-31695, 'General Description of the FH Criticality Safety Program', requires each facility develop a linking document called a Criticality Control Review (CCR) to document performance of these evaluations. Chapter 5,more » Appendix 5B of HNF-7098, Criticality Safety Program, provided an example of a format for a CCR that could be used in lieu of each facility developing its own CCR. Since the Plutonium Finishing Plant (PFP) is presently undergoing Deactivation and Decommissioning (D&D), new procedures are being developed for cleanout of equipment and systems that have not been operated in years. Existing Criticality Safety Evaluations (CSE) are revised, or new ones written, to develop the controls required to support D&D activities. Other Hanford facilities, including PFP, had difficulty using the basic CCR out of HNF-7098 when first implemented. Interpretation of the new guidelines indicated that many of the controls needed to be elevated to TSR level controls. Criterion 2 of the standard, requiring that the consequence of a criticality be examined for establishing the classification of a control, was not addressed. Upon in-depth review by PFP Criticality Safety staff, it was not clear that the programmatic interpretation of criterion 8C could be applied at PFP. Therefore, the PFP Criticality Safety staff decided to write their own CCR. The PFP CCR provides additional guidance for the evaluation team to use by clarifying the evaluation criteria in DOE-STD-3007

Implementing local agency safety management

DOT National Transportation Integrated Search

2003-12-17

For local agencies to mount a successful effort toward reducing motor vehicle collisions and their costs, an effective systematic approach must be taken. A Safety Management System (SMS) has two basic components: a collaborative information exchange ...

Improving Patient Safety in Public Hospitals: Developing Standard Measures to Track Medical Errors and Process Breakdowns.

PubMed

Ackerman, Sara L; Gourley, Gato; Le, Gem; Williams, Pamela; Yazdany, Jinoos; Sarkar, Urmimala

2018-03-14

The aim of the study was to develop standards for tracking patient safety gaps in ambulatory care in safety net health systems. Leaders from five California safety net health systems were invited to participate in a modified Delphi process sponsored by the Safety Promotion Action Research and Knowledge Network (SPARKNet) and the California Safety Net Institute in 2016. During each of the three Delphi rounds, the feasibility and validity of 13 proposed patient safety measures were discussed and prioritized. Surveys and transcripts from the meetings were analyzed to understand the decision-making process. The Delphi process included eight panelists. Consensus was reached to adopt 9 of 13 proposed measures. All 9 measures were unanimously considered valid, but concern was expressed about the feasibility of implementing several of the measures. Although safety net health systems face high barriers to standardized measurement, our study demonstrates that consensus can be reached on acceptable and feasible methods for tracking patient safety gaps in safety net health systems. If accompanied by the active participation key stakeholder groups, including patients, clinicians, staff, data system professionals, and health system leaders, the consensus measures reported here represent one step toward improving ambulatory patient safety in safety net health systems.

Assessing the Design and Development of Hybrid Linked Learning Professional Development Programs for Teachers: Challenges and Successes

ERIC Educational Resources Information Center

Erener, Eren

2017-01-01

This study informs instructional designers, all stakeholders in higher education and K-12, of the successes and challenges associated with designing and developing online/hybrid Linked Learning courses. The study examines via surveys and interviews the perspectives of instructional designers, subject matter experts, students, and course…

A Tale of Two Trails: Exploring Different Paths to Success

PubMed Central

Walker, Jennifer G.; Evenson, Kelly R.; Davis, William J.; Bors, Philip; Rodríguez, Daniel A.

2016-01-01

Background This comparative case study investigates 2 successful community trail initiatives, using the Active Living By Design (ALBD) Community Action Model as an analytical framework. The model includes 5 strategies: preparation, promotion, programs, policy, and physical projects. Methods Key stakeholders at 2 sites participated in in-depth interviews (N = 14). Data were analyzed for content using Atlas Ti and grouped according to the 5 strategies. Results Preparation Securing trail resources was challenging, but shared responsibilities facilitated trail development. Promotions The initiatives demonstrated minimal physical activity encouragement strategies. Programs Community stakeholders did not coordinate programmatic opportunities for routine physical activity. Policy Trails’ inclusion in regional greenway master plans contributed to trail funding and development. Policies that were formally institutionalized and enforced led to more consistent trail construction and safer conditions for users. Physical Projects Consistent standards for way finding signage and design safety features enhanced trail usability and safety. Conclusions Communities with different levels of government support contributed unique lessons to inform best practices of trail initiatives. This study revealed a disparity between trail development and use-encouragement strategies, which may limit trails’ impact on physical activity. The ALBD Community Action Model provided a viable framework to structure cross-disciplinary community trail initiatives. PMID:21597125

Pediatric extracorporeal shock wave lithotripsy: Predicting successful outcomes.

PubMed

McAdams, Sean; Shukla, Aseem R

2010-10-01

Extracorporeal shock wave lithotripsy (ESWL) is currently a first-line procedure of most upper urinary tract stones <2 cm of size because of established success rates, its minimal invasiveness and long-term safety with minimal complications. Given that alternative surgical and endourological options exist for the management of stone disease and that ESWL failure often results in the need for repeat ESWL or secondary procedures, it is highly desirable to identify variables predicting successful outcomes of ESWL in the pediatric population. Despite numerous reports and growing experience, few prospective studies and guidelines for pediatric ESWL have been completed. Variation in the methods by which study parameters are measured and reported can make it difficult to compare individual studies or make definitive recommendations. There is ongoing work and a need for continuing improvement of imaging protocols in children with renal colic, with a current focus on minimizing exposure to ionizing radiation, perhaps utilizing advancements in ultrasound and magnetic resonance imaging. This report provides a review of the current literature evaluating the patient attributes and stone factors that may be predictive of successful ESWL outcomes along with reviewing the role of pre-operative imaging and considerations for patient safety.

Supervisor Involvement and Professional Development Needs Associated with SAE Programming and Safety

ERIC Educational Resources Information Center

Lawver, Rebecca G.; Pate, Michael L.; Sorensen, Tyson J.

2016-01-01

This descriptive survey research study sought to gather evidence of school-based agriculture teachers' perceptions of community supervisor involvement with supervision and planning of students' Supervised Agricultural Experience (SAE) work activities and safety training professional development needs. Responding teachers indicated they agreed to…

Development of Guidance for States Transitioning to New Safety Analysis Tools

ERIC Educational Resources Information Center

Alluri, Priyanka

2010-01-01

With about 125 people dying on US roads each day, the US Department of Transportation heightened the awareness of critical safety issues with the passage of SAFETEA-LU (Safe Accountable Flexible Efficient Transportation Equity Act--A Legacy for Users) legislation in 2005. The legislation required each of the states to develop a Strategic Highway…

Engineering and Safety Partnership Enhances Safety of the Space Shuttle Program (SSP)

NASA Technical Reports Server (NTRS)

Duarte, Alberto

2007-01-01

Project Management must use the risk assessment documents (RADs) as tools to support their decision making process. Therefore, these documents have to be initiated, developed, and evolved parallel to the life of the project. Technical preparation and safety compliance of these documents require a great deal of resources. Updating these documents after-the-fact not only requires substantial increase in resources - Project Cost -, but this task is also not useful and perhaps an unnecessary expense. Hazard Reports (HRs), Failure Modes and Effects Analysis (FMEAs), Critical Item Lists (CILs), Risk Management process are, among others, within this category. A positive action resulting from a strong partnership between interested parties is one way to get these documents and related processes and requirements, released and updated in useful time. The Space Shuttle Program (SSP) at the Marshall Space Flight Center has implemented a process which is having positive results and gaining acceptance within the Agency. A hybrid Panel, with equal interest and responsibilities for the two larger organizations, Safety and Engineering, is the focal point of this process. Called the Marshall Safety and Engineering Review Panel (MSERP), its charter (Space Shuttle Program Directive 110 F, April 15, 2005), and its Operating Control Plan emphasizes the technical and safety responsibilities over the program risk documents: HRs; FMEA/CILs; Engineering Changes; anomalies/problem resolutions and corrective action implementations, and trend analysis. The MSERP has undertaken its responsibilities with objectivity, assertiveness, dedication, has operated with focus, and has shown significant results and promising perspectives. The MSERP has been deeply involved in propulsion systems and integration, real time technical issues and other relevant reviews, since its conception. These activities have transformed the propulsion MSERP in a truly participative and value added panel, making a

An innovative approach to interdisciplinary occupational safety and health education.

PubMed

Rosen, Mitchel A; Caravanos, Jack; Milek, Debra; Udasin, Iris

2011-07-01

The New York and New Jersey Education and Research Center (ERC) provides a range of graduate continuing education for occupational safety and health (OSH) professionals in training. A key element of the education is to provide interdisciplinary training to industrial hygienists, ergonomists, occupational medicine physicians and other health and safety trainees to prepare them for the collaboration required to solve the complex occupational health and safety problems they will face in their careers. This center has developed an innovative interdisciplinary training approach that provides an historical aspect, while allowing the graduate students to identify solutions to occupational issues from a multi-disciplinary approach. The ERC developed a tour that brings students to sites of historical and/or contemporary significance in the occupational safety and health and environmental fields. The ERC has conducted five tours, and has included 85 students and residents as participants. 80% of participants rated the tour as providing a high amount of OSH knowledge gained. 98% of the participants felt the goal of providing interdisciplinary education was achieved. This tour has been successful in bridging the OSH fields to better understand how occupational and environmental exposures have occurred, in order to prevent future exposures so that workplace conditions and health can be improved. Copyright © 2011 Wiley-Liss, Inc.

Adolescent Non-Involvement in Multiple Risk Behaviors: An Indicator of Successful Development?

ERIC Educational Resources Information Center

Willoughby, Teena; Chalmers, Heather; Busseri, Michael A.; Bosacki, Sandra; Dupont, Diane; Marini, Zopito; Rose-Krasnor, Linda; Sadava, Stan; Ward, Anthony; Woloshyn, Vera

2007-01-01

Based on the conceptualization of successful development as the joint maximization of desirable outcomes and minimization of undesirable outcomes (Baltes, 1997), the present study examined connections between adolescent non-involvement in multiple risk behaviors and positive developmental status. Results from a survey of 7290 high school students…

Aerospace Safety Advisory Panel

NASA Technical Reports Server (NTRS)

1999-01-01

This report covers the activities of the Aerospace Safety Advisory Panel (ASAP) for calendar year 1998-a year of sharp contrasts and significant successes at NASA. The year opened with the announcement of large workforce cutbacks. The slip in the schedule for launching the International Space Station (ISS) created a five-month hiatus in Space Shuttle launches. This slack period ended with the successful and highly publicized launch of the STS-95 mission. As the year closed, ISS assembly began with the successful orbiting and joining of the Functional Cargo Block (FGB), Zarya, from Russia and the Unity Node from the United States. Throughout the year, the Panel maintained its scrutiny of NASA's safety processes. Of particular interest were the potential effects on safety of workforce reductions and the continued transition of functions to the Space Flight Operations Contractor. Attention was also given to the risk management plans of the Aero-Space Technology programs, including the X-33, X-34, and X-38. Overall, the Panel concluded that safety is well served for the present. The picture is not as clear for the future. Cutbacks have limited the depth of talent available. In many cases, technical specialties are 'one deep.' The extended hiring freeze has resulted in an older workforce that will inevitably suffer significant departures from retirements in the near future. The resulting 'brain drain' could represent a future safety risk unless appropriate succession planning is started expeditiously. This and other topics are covered in the section addressing workforce. The major NASA programs are also limited in their ability to plan property for the future. This is of particular concern for the Space Shuttle and ISS because these programs are scheduled to operate well into the next century. In the case of the Space Shuttle, beneficial and mandatory safety and operational upgrades are being delayed because of a lack of sufficient present funding. Likewise, the ISS has

Analysis of Factors Affecting the Success of Onions Development Program in Kampar Regency

NASA Astrophysics Data System (ADS)

Amalia; Putri, Asgami

2017-12-01

The purpose of this study is to analyze the factors influencing the success of the onion plant development program in Kampar regency. The research method used was the applied survey method using interview technique and observation or direct supervision on the location of the object. The briefing of the interviews as well as the accuracy of collecting the required data was guided by the structured questionnaires. Determination technique of location / region sampling was done purposively based on the potency and capacity of commodity development. While the respondents were taken by cluster purvosive sampling method in order to classify the samples in accordance with the purpose of the study, determined by as many as 100 people taken from members of the farmer group. Analytical technique used is by using Logic Regression Analysis to determine the factors that influence the success of the program seen from the characteristics of farmers. From the results of this study it can be concluded that the factors influencing the success of onion development program in Kampar regency were a age (X1), education (X2), income (X3), ethnicity (X4), jobs (X5) And family responsibility (X6) could be made as follows: Log Y (P/1-p) = -1.778 +X10.021 + X20.028 - X30.213 + X41.986 + X52.930 - X60.455 From the above equation, it can be explained that the attributes that are positively related are X1 (age), X2 (education), X4 (ethnicity) and X5 (jobs) while the negative correlates are X3 (income) and X6 (family responsibility). From the logical regression result it can be seen that the significant value <0,05, then the independent variable influenced the dependent variable, so that when viewed from the table in the equation it was found that factors affecting the success rate of red onion development program in Kampar regency were X2 (education), X4 (ethnicity), X5 (jobs), and X6 (family responsibility).

The association between EMS workplace safety culture and safety outcomes.

PubMed

Weaver, Matthew D; Wang, Henry E; Fairbanks, Rollin J; Patterson, Daniel

2012-01-01

Prior studies have highlighted wide variation in emergency medical services (EMS) workplace safety culture across agencies. To determine the association between EMS workplace safety culture scores and patient or provider safety outcomes. We administered a cross-sectional survey to EMS workers affiliated with a convenience sample of agencies. We recruited these agencies from a national EMS management organization. We used the EMS Safety Attitudes Questionnaire (EMS-SAQ) to measure workplace safety culture and the EMS Safety Inventory (EMS-SI), a tool developed to capture self-reported safety outcomes from EMS workers. The EMS-SAQ provides reliable and valid measures of six domains: safety climate, teamwork climate, perceptions of management, working conditions, stress recognition, and job satisfaction. A panel of medical directors, emergency medical technicians and paramedics, and occupational epidemiologists developed the EMS-SI to measure self-reported injury, medical errors and adverse events, and safety-compromising behaviors. We used hierarchical linear models to evaluate the association between EMS-SAQ scores and EMS-SI safety outcome measures. Sixteen percent of all respondents reported experiencing an injury in the past three months, four of every 10 respondents reported an error or adverse event (AE), and 89% reported safety-compromising behaviors. Respondents reporting injury scored lower on five of the six domains of safety culture. Respondents reporting an error or AE scored lower for four of the six domains, while respondents reporting safety-compromising behavior had lower safety culture scores for five of the six domains. Individual EMS worker perceptions of workplace safety culture are associated with composite measures of patient and provider safety outcomes. This study is preliminary evidence of the association between safety culture and patient or provider safety outcomes.

Safety incentive and penalty provisions in Indian construction projects and their impact on safety performance.

PubMed

Hasan, Abid; Jha, Kumar Neeraj

2013-01-01

Safety incentive and penalty (I/P) provisions in construction contracts are one of the most common forms of I/P. Contradictory opinions on the effectiveness of these provisions have been expressed in the literature. Statistics on safety provisions were collected from 32 construction projects, which include both types of contracts - those with safety I/P provisions and those without them. Although inclusion of safety I/P provisions in contracts helps in improving the overall safety performance in construction projects, further scope for improvement still exists. Literature review and structured personal interviews, coupled with a survey based on preliminary questionnaire, revealed that successful formulation and implementation of such provisions are dependent on 25 attributes which need the attention of both clients and contractors. A questionnaire-based survey was conducted to evaluate these attributes. The six factors extracted by carrying out factor analysis are: incentive distribution method, proper labour training, special attention to risky situations, role of safety committee and sub-contractors, specialised works and safety equipments, and right form of I/P. If taken care of, these attributes have the potential to improve the safety performance in construction projects. The results would be useful to clients and contractors in implementing the safety I/P provisions and thereby improving safety performance.

Quo Vadis Payload Safety?

NASA Technical Reports Server (NTRS)

Fodroci, Michael P.; Schwartz, MaryBeth

2008-01-01

As we complete the preparations for the fourth Hubble Space Telescope (HST) servicing mission, we note an anniversary approaching: it was 30 years ago in July that the first HST payload safety review panel meeting was held. This, in turn, was just over a year after the very first payload safety review, a Phase 0 review for the Tracking and Data Relay Satellite and its Inertial Upper Stage, held in June of 1977. In adapting a process that had been used in the review and certification of earlier Skylab payloads, National Aeronautics and Space Administration (NASA) engineers sought to preserve the lessons learned in the development of technical payload safety requirements, while creating a new process that would serve the very different needs of the new space shuttle program. Their success in this undertaking is substantiated by the fact that this process and these requirements have proven to be remarkably robust, flexible, and adaptable. Furthermore, the payload safety process has, to date, served us well in the critical mission of safeguarding our astronauts, cosmonauts, and spaceflight participants. Both the technical requirements and their interpretation, as well as the associated process requirements have grown, evolved, been streamlined, and have been adapted to fit multiple programs, including the International Space Station (ISS) program, the Shuttle/Mir program, and most recently the United States Constellation program. From its earliest days, it was anticipated that the payload safety process would be international in scope, and so it has been. European Space Agency (ESA), Japan Aerospace Exploration Agency (JAXA), German Space Agency (DLR), Canadian Space Agency (CSA), Russian Space Agency (RSA), and many additional countries have flown payloads on both the space shuttle and on the ISS. Our close cooperation and long-term working relationships have culminated in the franchising of the payload safety review process itself to our partners in ESA, which in

Oxygen Sensing for Industrial Safety — Evolution and New Approaches

PubMed Central

Willett, Martin

2014-01-01

The requirement for the detection of oxygen in industrial safety applications has historically been met by electrochemical technologies based on the consumption of metal anodes. Products using this approach have been technically and commercially successful for more than three decades. However, a combination of new requirements is driving the development of alternative approaches offering fresh opportunities and challenges. This paper reviews some key aspects in the evolution of consumable anode products and highlights recent developments in alternative technologies aimed at meeting current and anticipated future needs in this important application. PMID:24681673

Clinical development of gene therapy: results and lessons from recent successes

PubMed Central

Kumar, Sandeep RP; Markusic, David M; Biswas, Moanaro; High, Katherine A; Herzog, Roland W

2016-01-01

Therapeutic gene transfer holds the promise of providing lasting therapies and even cures for diseases that were previously untreatable or for which only temporary or suboptimal treatments were available. For some time, clinical gene therapy was characterized by some impressive but rare examples of successes and also several setbacks. However, effective and long-lasting treatments are now being reported from gene therapy trials at an increasing pace. Positive outcomes have been documented for a wide range of genetic diseases (including hematological, immunological, ocular, and neurodegenerative and metabolic disorders) and several types of cancer. Examples include restoration of vision in blind patients, eradication of blood cancers for which all other treatments had failed, correction of hemoglobinopathies and coagulation factor deficiencies, and restoration of the immune system in children born with primary immune deficiency. To date, about 2,000 clinical trials for various diseases have occurred or are in progress, and many more are in the pipeline. Multiple clinical studies reported successful treatments of pediatric patients. Design of gene therapy vectors and their clinical development are advancing rapidly. This article reviews some of the major successes in clinical gene therapy of recent years. PMID:27257611

Analysis of adverse events as a contribution to safety culture in the context of practice development

PubMed

Hoffmann, Susanne; Frei, Irena Anna

2017-01-01

Background: Analysing adverse events is an effective patient safety measure. Aim: We show, how clinical nurse specialists have been enabled to analyse adverse events with the „Learning from Defects-Tool“ (LFD-Tool). Method: Our multi-component implementation strategy addressed both, the safety knowledge of clinical nurse specialists and their attitude towards patient safety. The culture of practice development was taken into account. Results: Clinical nurse specialists relate competency building on patient safety due to the application of the LFD-tool. Applying the tool, fosters the reflection of adverse events in care teams. Conclusion: Applying the „Learning from Defects-Tool“ promotes work-based learning. Analysing adverse events with the „Learning from Defects-Tool“ contributes to the safety culture in a hospital.

Supporting minority nursing students: 'Opportunity for Success' for Ethiopian immigrants in Israel.

PubMed

Arieli, D; Hirschfeld, M J

2013-06-01

To report on an Israeli academic nursing project, aimed at supporting the integration of Ethiopian immigrants into nursing studies. The representation of ethnic minorities within nursing is crucial for the provision of efficient care in diverse societies. Nevertheless, successful integration of minority students in nursing programs is not a simple task and needs developing support systems that will attract and retain students from minorities. Ethiopian Jewish immigrants and their descendants in Israel form a community of 120,000 people. Their participation in the national workforce is low, as well as their average income. The paper is based on formative evaluation, using action research, of an academic nursing program in Israel. Four main strategies identify this project: (1) a policy of institutional commitment, (2) personal relations with staff, (3) personal tutoring, and (4) cultural safety education. The project has reached success in terms of attraction, retention and students' satisfactions. The project's two main challenges, which need further concern, are: (1) giving support without labelling and (2) supporting without creating dependency. CONCLUSIONS AND INTERNATIONAL POLICY IMPLICATIONS: Appropriate strategies can enable success of minority students. Nevertheless, the amount of support needed for such programs raises two major questions: (1) To what extent should individual nursing departments be expected to bear solutions to this widely experienced problem? (2) How does focusing on one minority affect cultural safety of the overall group? © 2013 The Authors. International Nursing Review © 2013 International Council of Nurses.

Assessing the safety effects of cooperative intelligent transport systems: A bowtie analysis approach.

PubMed

Ehlers, Ute Christine; Ryeng, Eirin Olaussen; McCormack, Edward; Khan, Faisal; Ehlers, Sören

2017-02-01

The safety effects of cooperative intelligent transport systems (C-ITS) are mostly unknown and associated with uncertainties, because these systems represent emerging technology. This study proposes a bowtie analysis as a conceptual framework for evaluating the safety effect of cooperative intelligent transport systems. These seek to prevent road traffic accidents or mitigate their consequences. Under the assumption of the potential occurrence of a particular single vehicle accident, three case studies demonstrate the application of the bowtie analysis approach in road traffic safety. The approach utilizes exemplary expert estimates and knowledge from literature on the probability of the occurrence of accident risk factors and of the success of safety measures. Fuzzy set theory is applied to handle uncertainty in expert knowledge. Based on this approach, a useful tool is developed to estimate the effects of safety-related cooperative intelligent transport systems in terms of the expected change in accident occurrence and consequence probability. Copyright © 2016 Elsevier Ltd. All rights reserved.

Developing a research agenda for patient safety in primary care. Background, aims and output of the LINNEAUS collaboration on patient safety in primary care.

PubMed

Esmail, Aneez; Valderas, Jose M; Verstappen, Wim; Godycki-Cwirko, Maciek; Wensing, Michel

2015-09-01

This paper is an introduction to a supplement to The European Journal of General Practice, bringing together a body of research focusing on the issue of patient safety in relation to primary care. The supplement represents the outputs of the LINNEAUS collaboration on patient safety in primary care, which was a four-year (2009-2013) coordination and support action funded under the Framework 7 programme by the European Union. Being a coordination and support action, its aim was not to undertake new research, but to build capacity through engaging primary care researchers and practitioners in identifying some of the key challenges in this area and developing consensus statements, which will be an essential part in developing a future research agenda. This introductory article describes the aims of the LINNEAUS collaboration, provides a brief summary of the reasons to focus on patient safety in primary care, the epidemiological and policy considerations, and an introduction to the papers included in the supplement.

Developing a research agenda for patient safety in primary care. Background, aims and output of the LINNEAUS collaboration on patient safety in primary care

PubMed Central

Esmail, Aneez; Valderas, Jose M.; Verstappen, Wim; Godycki-Cwirko, Maciek; Wensing, Michel

2015-01-01

ABSTRACT This paper is an introduction to a supplement to The European Journal of General Practice, bringing together a body of research focusing on the issue of patient safety in relation to primary care. The supplement represents the outputs of the LINNEAUS collaboration on patient safety in primary care, which was a four-year (2009–2013) coordination and support action funded under the Framework 7 programme by the European Union. Being a coordination and support action, its aim was not to undertake new research, but to build capacity through engaging primary care researchers and practitioners in identifying some of the key challenges in this area and developing consensus statements, which will be an essential part in developing a future research agenda. This introductory article describes the aims of the LINNEAUS collaboration, provides a brief summary of the reasons to focus on patient safety in primary care, the epidemiological and policy considerations, and an introduction to the papers included in the supplement. PMID:26339828

Supporting Success and Safety in Relationships. Autism at-a-Glance

ERIC Educational Resources Information Center

Szidon, K.; Hedges, S.

2015-01-01

Like other teens, many teens on the autism spectrum desire friendships and romantic partners. Due to challenges with social communication, some teens with Autism Spectrum Disorder (ASD) may have limited experience dating and could benefit from explicitly learning skills associated with successful and safe dating experiences. Teens with ASD may…

Development of the Indicators of Successful Inclusion Scale (ISIS): Addressing Ecological Concerns

ERIC Educational Resources Information Center

Brandes, Joyce A.; McWhirter, Paula T.; Haring, Kathryn A.; Crowson, Michael H.; Millsap, Clay A.