Openness to experience, work experience and patient safety.

PubMed

Chang, Hao-Yuan; Friesner, Daniel; Lee, I-Chen; Chu, Tsung-Lan; Chen, Hui-Ling; Wu, Wan-Er; Teng, Ching-I

2016-11-01

The purpose of this study is to examine how the interaction between nurse openness and work experience is related to patient safety. No study has yet examined the interactions between these, and how openness and work experience jointly impact patient safety. This study adopts a cross-sectional design, using self-reported work experience, perceived time pressure and measures of patient safety, and was conducted in a major medical centre. The sample consisted of 421 full-time nurses from all available units in the centre. Proportionate random sampling was used. Patient safety was measured using the self-reported frequency of common adverse events. Openness was self-rated using items identified in the relevant literature. Nurse openness is positively related to the patient safety construct (B = 0.08, P = 0.03). Moreover, work experience reduces the relation between openness and patient safety (B = -0.12, P < 0.01). The relationship between openness, work experience and patient safety suggests a new means of improving patient care in a health system setting. Nurse managers may enhance patient safety by assessing nurse openness and assigning highly open nurses to duties that make maximum use of that trait. © 2016 John Wiley & Sons Ltd.

Work Safety Climate, Safety Behaviors, and Occupational Injuries of Youth Farmworkers in North Carolina

PubMed Central

Rodriguez, Guadalupe; Quandt, Sara A.; Arcury, Justin T.; Arcury, Thomas A.

2015-01-01

Objectives. The aims of this project were to describe the work safety climate and the association between occupational safety behaviors and injuries among hired youth farmworkers in North Carolina (n = 87). Methods. We conducted personal interviews among a cross-sectional sample of youth farmworkers aged 10 to 17 years. Results. The majority of youths reported that work safety practices were very important to management, yet 38% stated that supervisors were only interested in “doing the job quickly and cheaply.” Few youths reported appropriate work safety behavior, and 14% experienced an injury within the past 12 months. In bivariate analysis, perceptions of work safety climate were significantly associated with pesticide exposure risk factors for rewearing wet shoes (P = .01), wet clothes (P = .01), and shorts (P = .03). Conclusions. Youth farmworkers perceived their work safety climate as being poor. Although additional research is needed to support these findings, these results strengthen the need to increase employer awareness to improve the safety climate for protecting youth farmworkers from harmful exposures and injuries. PMID:25973817

Putting Safety in the Frame: Nurses' Sensemaking at Work.

PubMed

O'Keeffe, Valerie Jean; Thompson, Kirrilly Rebecca; Tuckey, Michelle Rae; Blewett, Verna Lesley

2015-01-01

Current patient safety policy focuses nursing on patient care goals, often overriding nurses' safety. Without understanding how nurses construct work health and safety (WHS), patient and nurse safety cannot be reconciled. Using ethnography, we examine social contexts of safety, studying 72 nurses across five Australian hospitals making decisions during patient encounters. In enacting safe practice, nurses used "frames" built from their contextual experiences to guide their behavior. Frames are produced by nurses, and they structure how nurses make sense of their work. Using thematic analysis, we identify four frames that inform nurses' decisions about WHS: (a) communicating builds knowledge, (b) experiencing situations guides decisions, (c) adapting procedures streamlines work, and (d) team working promotes safe working. Nurses' frames question current policy and practice by challenging how nurses' safety is positioned relative to patient safety. Recognizing these frames can assist the design and implementation of effective WHS management.

Understanding safety and production risks in rail engineering planning and protection.

PubMed

Wilson, John R; Ryan, Brendan; Schock, Alex; Ferreira, Pedro; Smith, Stuart; Pitsopoulos, Julia

2009-07-01

Much of the published human factors work on risk is to do with safety and within this is concerned with prediction and analysis of human error and with human reliability assessment. Less has been published on human factors contributions to understanding and managing project, business, engineering and other forms of risk and still less jointly assessing risk to do with broad issues of 'safety' and broad issues of 'production' or 'performance'. This paper contains a general commentary on human factors and assessment of risk of various kinds, in the context of the aims of ergonomics and concerns about being too risk averse. The paper then describes a specific project, in rail engineering, where the notion of a human factors case has been employed to analyse engineering functions and related human factors issues. A human factors issues register for potential system disturbances has been developed, prior to a human factors risk assessment, which jointly covers safety and production (engineering delivery) concerns. The paper concludes with a commentary on the potential relevance of a resilience engineering perspective to understanding rail engineering systems risk. Design, planning and management of complex systems will increasingly have to address the issue of making trade-offs between safety and production, and ergonomics should be central to this. The paper addresses the relevant issues and does so in an under-published domain - rail systems engineering work.

The role of production and teamwork practices in construction safety: a cognitive model and an empirical case study.

PubMed

Mitropoulos, Panagiotis Takis; Cupido, Gerardo

2009-01-01

In construction, the challenge for researchers and practitioners is to develop work systems (production processes and teams) that can achieve high productivity and high safety at the same time. However, construction accident causation models ignore the role of work practices and teamwork. This study investigates the mechanisms by which production and teamwork practices affect the likelihood of accidents. The paper synthesizes a new model for construction safety based on the cognitive perspective (Fuller's Task-Demand-Capability Interface model, 2005) and then presents an exploratory case study. The case study investigates and compares the work practices of two residential framing crews: a 'High Reliability Crew' (HRC)--that is, a crew with exceptional productivity and safety over several years, and an average performing crew from the same company. The model explains how the production and teamwork practices generate the work situations that workers face (the task demands) and affect the workers ability to cope (capabilities). The case study indicates that the work practices of the HRC directly influence the task demands and match them with the applied capabilities. These practices were guided by the 'principle' of avoiding errors and rework and included work planning and preparation, work distribution, managing the production pressures, and quality and behavior monitoring. The Task Demand-Capability model links construction research to a cognitive model of accident causation and provides a new way to conceptualize safety as an emergent property of the production practices and teamwork processes. The empirical evidence indicates that the crews' work practices and team processes strongly affect the task demands, the applied capabilities, and the match between demands and capabilities. The proposed model and the exploratory case study will guide further discovery of work practices and teamwork processes that can increase both productivity and safety in construction

16 CFR 1031.3 - Consumer Product Safety Act amendments.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Consumer Product Safety Act amendments. 1031.3 Section 1031.3 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL COMMISSION... Consumer Product Safety Act amendments. The Consumer Product Safety Act, as amended, contains several...

16 CFR 1031.3 - Consumer Product Safety Act amendments.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Consumer Product Safety Act amendments. 1031.3 Section 1031.3 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL COMMISSION... Consumer Product Safety Act amendments. The Consumer Product Safety Act, as amended, contains several...

Work climate and work load measurement in production room of Batik Merak Manis Laweyan

NASA Astrophysics Data System (ADS)

Suhardi, Bambang; Simanjutak, Sry Yohana; Laksono, Pringgo Widyo; Herjunowibowo, Dewanto

2017-11-01

The work environment is everything around the labours that can affect them in the exercise of duties and work that is charged. In a work environment, there are workplace climate and workload which affect the labour in force carrying out its work. The working climate is one of the physical factors that could potentially cause health problems towards labour at extreme conditions of hot and cold that exceed the threshold limit value allowed by the standards of health. The climate works closely related to the workload accepted by workers in the performance of their duties. The influence of workload is pretty dominant against the performance of human resources and may cause negative effects to the safety and health of the labours. This study aims to measure the effect of the work climate and the workload against workers productivity. Furthermore, some suggestions to increase the productivity also been recommended. The research conducted in production room of Batik Merak Manis Laweyan. The results showed that the workplace climate and the workload at eight stations in production room of Merak Manis does not agree to the threshold limit value that has been set. Therefore, it is recommended to add more opening windows to add air velocity inside the building thus the humidity and temperature might be reduced.

Participatory approach to identify interventions to improve the health, safety, and work productivity of smallholder women vegetable farmers in the Gambia.

PubMed

Vanderwal, Londa; Rautiainen, Risto; Ramirez, Marizen; Kuye, Rex; Peek-Asa, Corinne; Cook, Thomas; Culp, Kennith; Donham, Kelley

2011-03-01

This paper describes the qualitative, community-based participatory approach used to identify culturally-acceptable and sustainable interventions to improve the occupational health, safety, and productivity of smallholder women vegetable farmers in The Gambia (West Africa). This approach was used to conduct: 1) analysis of the tasks and methods traditionally used in vegetable production, and 2) selection of interventions. The most arduous garden tasks that were amenable to interventions were identified, and the interventions were selected through a participatory process for further evaluation. Factors contributing to the successful implementation of the participatory approach used in this study included the following: 1) ensuring that cultural norms were respected and observed; 2) working closely with the existing garden leadership structure; and 3) research team members working with the subjects for an extended period of time to gain first-hand understanding of the selected tasks and to build credibility with the subjects.

16 CFR 1115.8 - Compliance with product safety standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... applicable mandatory consumer product safety standards and to report to the Commission any products which do.... 1115.8 Section 1115.8 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SUBSTANTIAL PRODUCT HAZARD REPORTS General Interpretation § 1115.8 Compliance with...

Evaluation of work zone safety operations and issues.

DOT National Transportation Integrated Search

2006-03-01

Work zone activities are one of the areas with a high potential for compromised safety for workers and road users. Various measures have been taken to increase the level of safety in work zones; including the use of double fines for speeding and the ...

Consumer product safety: A systems problem

NASA Technical Reports Server (NTRS)

Clark, C. C.

1971-01-01

The manufacturer, tester, retailer, consumer, repairer disposer, trade and professional associations, national and international standards bodies, and governments in several roles are all involved in consumer product safety. A preliminary analysis, drawing on system safety techniques, is utilized to distinguish the inter-relations of these many groups and the responsibilities that they are or could take for product safety, including the slow accident hazards as well as the more commonly discussed fast accident hazards. The importance of interactive computer aided information flow among these groups is particularly stressed.

23 CFR 630.1006 - Work zone safety and mobility policy.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false Work zone safety and mobility policy. 630.1006 Section 630.1006 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS PRECONSTRUCTION PROCEDURES Work Zone Safety and Mobility § 630.1006 Work zone safety and mobility...

23 CFR 630.1006 - Work zone safety and mobility policy.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 23 Highways 1 2014-04-01 2014-04-01 false Work zone safety and mobility policy. 630.1006 Section 630.1006 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS PRECONSTRUCTION PROCEDURES Work Zone Safety and Mobility § 630.1006 Work zone safety and mobility...

23 CFR 630.1006 - Work zone safety and mobility policy.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 23 Highways 1 2013-04-01 2013-04-01 false Work zone safety and mobility policy. 630.1006 Section 630.1006 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS PRECONSTRUCTION PROCEDURES Work Zone Safety and Mobility § 630.1006 Work zone safety and mobility...

23 CFR 630.1006 - Work zone safety and mobility policy.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 23 Highways 1 2012-04-01 2012-04-01 false Work zone safety and mobility policy. 630.1006 Section 630.1006 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS PRECONSTRUCTION PROCEDURES Work Zone Safety and Mobility § 630.1006 Work zone safety and mobility...

Effects of extended work shifts and shift work on patient safety, productivity, and employee health.

PubMed

Keller, Simone M

2009-12-01

It is estimated 1.3 million health care errors occur each year and of those errors 48,000 to 98,000 result in the deaths of patients (Barger et al., 2006). Errors occur for a variety of reasons, including the effects of extended work hours and shift work. The need for around-the-clock staff coverage has resulted in creative ways to maintain quality patient care, keep health care errors or adverse events to a minimum, and still meet the needs of the organization. One way organizations have attempted to alleviate staff shortages is to create extended work shifts. Instead of the standard 8-hour shift, workers are now working 10, 12, 16, or more hours to provide continuous patient care. Although literature does support these staffing patterns, it cannot be denied that shifts beyond the traditional 8 hours increase staff fatigue, health care errors, and adverse events and outcomes and decrease alertness and productivity. This article includes a review of current literature on shift work, the definition of shift work, error rates and adverse outcomes related to shift work, health effects on shift workers, shift work effects on older workers, recommended optimal shift length, positive and negative effects of shift work on the shift worker, hazards associated with driving after extended shifts, and implications for occupational health nurses. Copyright 2009, SLACK Incorporated.

Evaluation of Safety, Quality and Productivity in Construction

NASA Astrophysics Data System (ADS)

Usmen, M. A.; Vilnitis, M.

2015-11-01

This paper examines the success indicators of construction projects, safety, quality and productivity, in terms of their implications and impacts during and after construction. First safety is considered during construction with a focus on hazard identification and the prevention of occupational accidents and injuries on worksites. The legislation mandating safety programs, training and compliance with safety standards is presented and discussed. Consideration of safety at the design stage is emphasized. Building safety and the roles of building codes in prevention of structural failures are also covered in the paper together with factors affecting building failures and methods for their prevention. Quality is introduced in the paper from the perspective of modern total quality management. Concepts of quality management, quality control, quality assurance and Six Sigma and how they relate to building quality and structural integrity are discussed with examples. Finally, productivity concepts are presented with emphasis on effective project management to minimize loss of productivity, complimented by lean construction and lean Six Sigma principles. The paper concludes by synthesizing the relationships between safety, quality and productivity.

Fatigue and work safety behavior in men during early fatherhood.

PubMed

Mellor, Gary; St John, Winsome

2012-01-01

This study investigated the relationship between fatigue and work safety behavior of fathers with new babies. A total of 241 fathers completed a questionnaire at 6 and 12 weeks postpartum with items on fatigue and safety behavior at work. Results revealed that fathers worked long hours, reported a moderate-to-high physical intensity of work, and experienced interrupted sleep averaging less than 6 hours. Fathers also reported moderate fatigue at both 6 and 12 weeks postbirth, which was inversely related to safety behavior. Both fatigue and sleep history made a small but statistically significant contribution to safety behavior results at 6 and 12 weeks postbirth. Findings suggest that working fathers with babies experience fatigue during early fatherhood and are unable to recover due to interrupted and poor sleep patterns. Managers should consider the potential for fatigue to compromise work safety and develop risk management strategies that target new fathers.

Improving work zone safety through speed management.

DOT National Transportation Integrated Search

2013-06-01

Safety hazards are increased in highway work zones as the dynamics of a work zone introduce a constantly changing : environment with varying levels of risk. Excessive speeding through work and maintenance zones is a common occurrence : which elevates...

Calibration of highway safety manual work zone crash modification factors.

DOT National Transportation Integrated Search

2014-06-01

The Highway Safety Manual is the national safety manual that provides quantitative methods for analyzing highway safety. The : HSM presents crash modification factors related to work zone characteristics such as work zone duration and length. These c...

Activities of the US-Japan Safety Monitor Joint Working Group

DOE Office of Scientific and Technical Information (OSTI.GOV)

Richard L. Savercool; Lee C. Cadwallader

2004-09-01

This paper documents the activities of the US-Japan exchange in the area of personnel safety at magnetic and laser fusion experiments. A near-miss event with a visiting scientist to the US in 1992 was the impetus for forming the Joint Working Group on Fusion Safety. This exchnge has been under way for over ten years and has provided many safety insights for both US and Japanese facility personnel at national institutes and at universities. The background and activities of the Joint Working Group are described, including the facilities that have been visited for safety walkthroughs, the participants from both countries,more » and the main safety issues examined during visits. Based on these visits, some operational safety ideas to enhance experiment safety are given. The near-term future plans of the Safety Monitor Joint Working group are also discussed.« less

Safety training for working youth: Methods used versus methods wanted.

PubMed

Zierold, Kristina M

2016-04-07

Safety training is promoted as a tool to prevent workplace injury; however, little is known about the safety training experiences young workers get on-the-job. Furthermore, nothing is known about what methods they think would be the most helpful for learning about safe work practices. To compare safety training methods teens get on the job to those safety training methods teens think would be the best for learning workplace safety, focusing on age differences. A cross-sectional survey was administered to students in two large high schools in spring 2011. Seventy percent of working youth received safety training. The top training methods that youth reported getting at work were safety videos (42%), safety lectures (25%), and safety posters/signs (22%). In comparison to the safety training methods used, the top methods youth wanted included videos (54%), hands-on (47%), and on-the-job demonstrations (34%). This study demonstrated that there were differences in training methods that youth wanted by age; with older youth seemingly wanting more independent methods of training and younger teens wanting more involvement. Results indicate that youth want methods of safety training that are different from what they are getting on the job. The differences in methods wanted by age may aid in developing training programs appropriate for the developmental level of working youth.

Shift work, safety, and aging.

PubMed

Folkard, Simon

2008-04-01

It has long been recognized that older shift workers may have shorter and more disturbed day sleeps between successive night shifts than their younger colleagues. This has given rise to considerable concern over the safety of aging shift workers because of the increasing age of the work force and increases in retirement age. Because there have been no direct studies of the combined effects of shift work and age on safety, the present paper begins by reviewing the literature relating safety to features of shift systems. It then considers the general effect of age on occupational injury rates before examining existing evidence of the combined effects of shift work and age on performance capabilities. The results of the literature review indicate that when the a priori risk is constant, there is reasonably clear evidence that injury rates are higher at night, and that they increase over successive night shifts more rapidly than over successive day shifts. Further, although occupational injuries are less frequent in older workers, those that do occur tend to be more serious. Finally, there is some suggestive evidence from studies of objectively measured performance capabilities that older workers may be less able to both maintain their performance over the course of a night shift and cope with longer spans of successive night shifts. It is concluded that it seems possible, even though unproven as yet, that older workers may be at greater risk both to injury and accident on the night shift. There is a strong need for future epidemiological studies of the combined effects of shift work and age on injuries and accidents, and that these should attempt to separate the effects of age per se from those of generation.

LANL Safety Conscious Work Environment (SCWE) Self-Assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hargis, Barbara C.

2014-01-29

On December 21, 2012 Secretary of Energy Chu transmitted to the Defense Nuclear Facilities Safety Board (DNFSB) revised commitments on the implementation plan for Safety Culture at the Waste Treatment and Immobilization Plant. Action 2-5 was revised to require contractors and federal organizations to complete Safety Conscious Work Environment (SCWE) selfassessments and provide reports to the appropriate U.S. Department of Energy (DOE) - Headquarters Program Office by September 2013. Los Alamos National Laboratory (LANL) planned and conducted a Safety Conscious Work Environment (SCWE) Self-Assessment over the time period July through August, 2013 in accordance with the SCWE Self-Assessment Guidance providedmore » by DOE. Significant field work was conducted over the 2-week period August 5-16, 2013. The purpose of the self-assessment was to evaluate whether programs and processes associated with a SCWE are in place and whether they are effective in supporting and promoting a SCWE.« less

Factors influencing work productivity and intent to stay in nursing.

PubMed

Letvak, Susan; Buck, Raymond

2008-01-01

The researchers document the individual and workplace characteristics associated with decreased work productivity and intent to stay in nursing for nurses employed in direct patient care in the hospital setting. Factors associated with decreased work productivity were age, total years worked as a RN, quality of care provided, job stress score, having had a job injury, and having a health problem. Nurse leaders must place additional efforts on changes needed to improve the hospital workplace environment to decrease job stress, improve RNs' ability to provide quality care, and to assure the health and safety of nurses. Reducing job stress and providing adequate staffing so quality of care can be provided will enhance job satisfaction which will also encourage RNs to stay at the bedside. Improved work environments may delay older RNs' retirement from the workforce.

Consumer Product Safety Commission

MedlinePlus

... mail Inside CPSC Accessibility Privacy Policy Budget, Performances & Finance Open Government Freedom of Information (FOIA) Inspector General ... leave the U.S. Consumer Product Safety Commission (CPSC) public website. The link you selected is for a ...

Work Pressure and Safety Behaviors among Health Workers in Ghana: The Moderating Role of Management Commitment to Safety.

PubMed

Amponsah-Tawaih, Kwesi; Adu, Michael Appiah

2016-12-01

safety and healthy working environment has received numerous research attention over the years. Majority of these researches seem to have been conducted in the construction industry, with little attention in the health sector. Nonetheless, there are couple of studies conducted in Africa that suggest pressure in hospitals. Therefore the aim of the study was to examine how pressure influence safety behavior in the hospitals. With reference to the relevance of safety behavior in primary health care delivery, there was the need for the study. Data was obtained from 422 public hospital employees. Respondents were assured that all information would be kept confidential to increase the response rate and acquire more accurate information. Collection of questionnaires from participants took four weeks (20 working days), after which the data was analyzed. The result of the study showed that work pressure correlated negatively with safety behavior. General safety climate significantly correlated positively with safety behavior and negatively with work pressure, although the effect size for the latter was smaller. Hierarchical regression analysis showed management commitment to safety to moderate the relationship between work pressure and safety behavior. When employees perceive safety communication, safety systems and training to be positive, they seem to comply with safety rules and procedures than voluntarily participate in safety activities.

Nurse working conditions and patient safety outcomes.

PubMed

Stone, Patricia W; Mooney-Kane, Cathy; Larson, Elaine L; Horan, Teresa; Glance, Laurent G; Zwanziger, Jack; Dick, Andrew W

2007-06-01

System approaches, such as improving working conditions, have been advocated to improve patient safety. However, the independent effect of many working condition variables on patient outcomes is unknown. To examine effects of a comprehensive set of working conditions on elderly patient safety outcomes in intensive care units. Observational study, with patient outcome data collected using the National Nosocomial Infection Surveillance system protocols and Medicare files. Several measures of health status and fixed setting characteristics were used to capture distinct dimensions of patient severity of illness and risk for disease. Working condition variables included organizational climate measured by nurse survey; objective measures of staffing, overtime, and wages (derived from payroll data); and hospital profitability and magnet accreditation. The sample comprised 15,846 patients in 51 adult intensive care units in 31 hospitals depending on the outcome analyzed; 1095 nurses were surveyed. Central line associated bloodstream infections (CLBSI), ventilator-associated pneumonia, catheter-associated urinary tract infections, 30-day mortality, and decubiti. Units with higher staffing had lower incidence of CLBSI, ventilator-associated pneumonia, 30-day mortality, and decubiti (P working conditions were associated with all outcomes measured. Improving working conditions will most likely promote patient safety. Future researchers and policymakers should consider a broad set of working condition variables.

Work, obesity, and occupational safety and health.

PubMed

Schulte, Paul A; Wagner, Gregory R; Ostry, Aleck; Blanciforti, Laura A; Cutlip, Robert G; Krajnak, Kristine M; Luster, Michael; Munson, Albert E; O'Callaghan, James P; Parks, Christine G; Simeonova, Petia P; Miller, Diane B

2007-03-01

There is increasing evidence that obesity and overweight may be related, in part, to adverse work conditions. In particular, the risk of obesity may increase in high-demand, low-control work environments, and for those who work long hours. In addition, obesity may modify the risk for vibration-induced injury and certain occupational musculoskeletal disorders. We hypothesized that obesity may also be a co-risk factor for the development of occupational asthma and cardiovascular disease that and it may modify the worker's response to occupational stress, immune response to chemical exposures, and risk of disease from occupational neurotoxins. We developed 5 conceptual models of the interrelationship of work, obesity, and occupational safety and health and highlighted the ethical, legal, and social issues related to fuller consideration of obesity's role in occupational health and safety.

Food Safety Practices in the Egg Products Industry.

PubMed

Viator, Catherine L; Cates, Sheryl C; Karns, Shawn A; Muth, Mary K; Noyes, Gary

2016-07-01

We conducted a national census survey of egg product plants (n = 57) to obtain information on the technological and food safety practices of the egg products industry and to assess changes in these practices from 2004 to 2014. The questionnaire asked about operational and sanitation practices, microbiological testing practices, food safety training for employees, other food safety issues, and plant characteristics. The findings suggest that improvements were made in the industry's use of food safety technologies and practices between 2004 and 2014. The percentage of plants using advanced pasteurization technology and an integrated, computerized processing system increased by almost 30 percentage points. Over 90% of plants voluntarily use a written hazard analysis and critical control point (HACCP) plan to address food safety for at least one production step. Further, 90% of plants have management employees who are trained in a written HACCP plan. Most plants (93%) conduct voluntary microbiological testing. The percentage of plants conducting this testing on egg products before pasteurization has increased by almost 30 percentage points since 2004. The survey findings identify strengths and weaknesses in egg product plants' food safety practices and can be used to guide regulatory policymaking and to conduct required regulatory impact analysis of potential regulations.

ACOEM practice guidelines: opioids and safety-sensitive work.

PubMed

Hegmann, Kurt T; Weiss, Michael S; Bowden, Kirk; Branco, Fernando; DuBrueler, Kimberly; Els, Charl; Mandel, Steven; McKinney, David W; Miguel, Rafael; Mueller, Kathryn L; Nadig, Robert J; Schaffer, Michael I; Studt, Larry; Talmage, James B; Travis, Russell L; Winters, Thomas; Thiese, Matthew S; Harris, Jeffrey S

2014-07-01

ACOEM has updated the treatment guidelines concerning opioids. This report highlights the safety-sensitive work recommendation that has been developed. Comprehensive literature reviews were accomplished with article abstraction, critiquing, grading, evidence table compilation, and guideline finalization by a multidisciplinary expert panel to develop evidence-based guidance. A total of 12 moderate-quality studies were identified to address motor vehicle crash risk, and none regarding other work among opioid-using patients. Acute or chronic opioid use is not recommended for patients who perform safety-sensitive jobs. These jobs include operating motor vehicles, other modes of transportation, forklift driving, overhead crane operation, heavy equipment operation and tasks involving high levels of cognitive function and judgment. Quality evidence consistently demonstrates increased risk of vehicle crashes and is recommended as the surrogate for other safety-sensitive work tasks.

Working on Sundays–effects on safety, health, and work-life balance.

PubMed

Wirtz, Anna; Nachreiner, Friedhelm; Rolfes, Katharina

2011-05-01

Several attributes of the work schedule can increase the risk of occupational injuries and accidents, health impairments, and reduced social participation. Although previous studies mainly focused on the effects of shiftwork and long working hours on employee health and safety, there is little evidence of a potential negative impact of working Sundays on the incidence of occupational accidents, health impairments, and work-life balance. A representative sample of employed workers in 31 member and associated states of the European Union (n = 23,934) served as the database for a cross-sectional analysis. The sample was collected via face-to-face interviews in the year 2005. The association of the risks of occupational accidents, health impairments, and decreases in work-life balance with working Sundays was calculated using logistic regression models, controlling for potential confounders, such as shiftwork, workload, and demographic characteristics. The results indicated that working one or more Sundays/month was associated with increase both in the risk of reporting one or more health impairments (odds ratio [OR]: 1.17, 95% confidence interval [CI]: 1.06-1.29) and poorer work-life balance (OR: 1.15, 95% CI: 1.02-1.28). These effects remained after controlling for potentially confounding factors, such as other work schedule attributes, intensity of physical and mental workload, and individual characteristics. Furthermore, working Sundays was also related to increased risk of occupational accidents within the last year (OR: 1.34, 95% CI: 1.03-1.73). Controlling again for individual, workload, and working-time characteristics, a significant association with accident risk, however, remained only in work sectors with low a priori risk of occupational accidents (OR: 1.40, 95% CI: 1.02-1.91), although the increased risk could be observed for both medium and high a priori risk sectors working Sundays (without controlling for additional confounders). The results thus

Safety assessment tool for construction zone work phasing plans

DOT National Transportation Integrated Search

2016-05-01

The Highway Safety Manual (HSM) is the compilation of national safety research that provides quantitative methods for : analyzing highway safety. The HSM presents crash modification functions related to freeway work zone characteristics such as : wor...

Work zone safety : physical and behavioral barriers in accident prevention.

DOT National Transportation Integrated Search

2014-05-01

This report discusses the usefulness of creating a work zone traffic safety culture as a methodology to improve the overall : safety of both work zone personnel and the traveling public in Missouri. As part of this research, the existing MoDOT : Work...

Microbial bioinformatics for food safety and production

PubMed Central

Alkema, Wynand; Boekhorst, Jos; Wels, Michiel

2016-01-01

In the production of fermented foods, microbes play an important role. Optimization of fermentation processes or starter culture production traditionally was a trial-and-error approach inspired by expert knowledge of the fermentation process. Current developments in high-throughput ‘omics’ technologies allow developing more rational approaches to improve fermentation processes both from the food functionality as well as from the food safety perspective. Here, the authors thematically review typical bioinformatics techniques and approaches to improve various aspects of the microbial production of fermented food products and food safety. PMID:26082168

Product Safety, It's No Accident. A Consumer Product Safety Monthly Planning Guide for Community Organizations.

ERIC Educational Resources Information Center

Consumer Product Safety Commission, Washington, DC.

A consumer product safety monthly planning guide for community organizations is provided. The material is organized into suggested monthly topics with seasonal emphasis. Each section highlights selected information about how to identify potential hazards associated with categories of products. Each section also includes recommendaitons of ways to…

Comparing Occupational Health and Safety Management System Programming with Injury Rates in Poultry Production.

PubMed

Autenrieth, Daniel A; Brazile, William J; Douphrate, David I; Román-Muñiz, Ivette N; Reynolds, Stephen J

2016-01-01

Effective methods to reduce work-related injuries and illnesses in animal production agriculture are sorely needed. One approach that may be helpful for agriculture producers is the adoption of occupational health and safety management systems. In this replication study, the authors compared the injury rates on 32 poultry growing operations with the level of occupational health and safety management system programming at each farm. Overall correlations between injury rates and programming level were determined, as were correlations between individual management system subcomponents to ascertain which parts might be the most useful for poultry producers. It was found that, in general, higher levels of occupational health and safety management system programming were associated with lower rates of workplace injuries and illnesses, and that Management Leadership was the system subcomponent with the strongest correlation. The strength and significance of the observed associations were greater on poultry farms with more complete management system assessments. These findings are similar to those from a previous study of the dairy production industry, suggesting that occupational health and safety management systems may hold promise as a comprehensive way for producers to improve occupational health and safety performance. Further research is needed to determine the effectiveness of such systems to reduce farm work injuries and illnesses. These results are timely given the increasing focus on occupational safety and health management systems.

Nonstandard work arrangements and worker health and safety.

PubMed

Howard, John

2017-01-01

Arrangements between those who perform work and those who provide jobs come in many different forms. Standard work arrangements now exist alongside several nonstandard arrangements: agency work, contract work, and gig work. While standard work arrangements are still the most prevalent types, the rise of nonstandard work arrangements, especially temporary agency, contract, and "gig" arrangements, and the potential effects of these new arrangements on worker health and safety have captured the attention of government, business, labor, and academia. This article describes the major work arrangements in use today, profiles the nonstandard workforce, discusses several legal questions about how established principles of labor and employment law apply to nonstandard work arrangements, summarizes findings published in the past 20 years about the health and safety risks for workers in nonstandard work arrangements, and outlines current research efforts in the area of healthy work design and worker well-being. Am. J. Ind. Med. 60:1-10, 2017. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Relating safety, productivity and company type for motor-manual logging operations in the Italian Alps.

PubMed

Montorselli, Niccolò Brachetti; Lombardini, Carolina; Magagnotti, Natascia; Marchi, Enrico; Neri, Francesco; Picchi, Gianni; Spinelli, Raffaele

2010-11-01

The study compared the performance of four different logging crews with respect to productivity, organization and safety. To this purpose, the authors developed a data collection method capable of providing a quantitative analysis of risk-taking behavior. Four crews were tested under the same working conditions, representative of close-to-nature alpine forestry. Motor-manual working methods were applied, since these methods are still prevalent in the specific study area, despite the growing popularity of mechanical processors. Crews from public companies showed a significantly lower frequency of risk-taking behavior. The best safety performance was offered by the only (public) crew that had been administered formal safety training. The study seems to deny the common prejudice that safety practice is inversely proportional to productivity. Instead, productivity is increased by introducing more efficient working methods and equipment. The quantitative analysis of risk-taking behavior developed in this study can be applied to a number of industrial fields besides forestry. Characterizing risk-taking behavior for a given case may eventually lead to the development of custom-made training programmes, which may address problem areas while avoiding that the message is weakened by the inclusion of redundant information. In the specific case of logging crews in the central Alps, the study suggests that current training courses may be weak on ergonomics, and advocates a staged training programme, focusing first on accident reduction and then expanding to the prevention of chronic illness. 2010 Elsevier Ltd. All rights reserved.

75 FR 29155 - Publicly Available Consumer Product Safety Information Database

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-24

...The Consumer Product Safety Commission (``Commission,'' ``CPSC,'' or ``we'') is issuing a notice of proposed rulemaking that would establish a publicly available consumer product safety information database (``database''). Section 212 of the Consumer Product Safety Improvement Act of 2008 (``CPSIA'') amended the Consumer Product Safety Act (``CPSA'') to require the Commission to establish and maintain a publicly available, searchable database on the safety of consumer products, and other products or substances regulated by the Commission. The proposed rule would interpret various statutory requirements pertaining to the information to be included in the database and also would establish provisions regarding submitting reports of harm; providing notice of reports of harm to manufacturers; publishing reports of harm and manufacturer comments in the database; and dealing with confidential and materially inaccurate information.

[Storage of plant protection products in farms: minimum safety requirements].

PubMed

Dutto, Moreno; Alfonzo, Santo; Rubbiani, Maristella

2012-01-01

Failure to comply with requirements for proper storage and use of pesticides in farms can be extremely hazardous and the risk of accidents involving farm workers, other persons and even animals is high. There are still wide differences in the interpretation of the concept of "securing or making safe", by workers in this sector. One of the critical points detected, particularly in the fruit sector, is the establishment of an adequate storage site for plant protection products. The definition of "safe storage of pesticides" is still unclear despite the recent enactment of Legislative Decree 81/2008 regulating health and work safety in Italy. In addition, there are no national guidelines setting clear minimum criteria for storage of plant protection products in farms. The authors, on the basis of their professional experience and through analysis of recent legislation, establish certain minimum safety standards for storage of pesticides in farms.

Work stress and patient safety: observer-rated work stressors as predictors of characteristics of safety-related events reported by young nurses.

PubMed

Elfering, A; Semmer, N K; Grebner, S

This study investigates the link between workplace stress and the 'non-singularity' of patient safety-related incidents in the hospital setting. Over a period of 2 working weeks 23 young nurses from 19 hospitals in Switzerland documented 314 daily stressful events using a self-observation method (pocket diaries); 62 events were related to patient safety. Familiarity of safety-related events and probability of recurrence, as indicators of non-singularity, were the dependent variables in multilevel regression analyses. Predictor variables were both situational (self-reported situational control, safety compliance) and chronic variables (job stressors such as time pressure, or concentration demands and job control). Chronic work characteristics were rated by trained observers. The most frequent safety-related stressful events included incomplete or incorrect documentation (40.3%), medication errors (near misses 21%), delays in delivery of patient care (9.7%), and violent patients (9.7%). Familiarity of events and probability of recurrence were significantly predicted by chronic job stressors and low job control in multilevel regression analyses. Job stressors and low job control were shown to be risk factors for patient safety. The results suggest that job redesign to enhance job control and decrease job stressors may be an important intervention to increase patient safety.

How to evaluate the risks of work equipment and installations for health and safety? Research and activities of the German Committee for Plant Safety and consequences for regulation.

PubMed

Pieper, R

2012-01-01

Work equipment and installations with a high risk for health and safety of employees should be paid a special attention. The German Product Safety Act, which is aimed to manufacturers or distributors in order to protect consumers, maintains a conclusive catalogue of these so-called "installations in need of monitoring" fixing the work equipment and installations for which such special inspections can be demanded. This catalogue has remained unchanged for decades and has been transformed nearly unmodified into the Plant Safety Ordinance. Currently, there is a discussion about this catalogue in Germany. A major point of concern is the definition and the significance of "especially" dangerous work equipment and installations. Two recent research projects are dealing with the problem how to define "especially".

30 CFR 250.804 - Production safety-system testing and records.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 2 2013-07-01 2013-07-01 false Production safety-system testing and records... Gas Production Safety Systems § 250.804 Production safety-system testing and records. (a) Inspection... devices operating at temperatures which could ignite a methane-air mixture shall not be used. All...

30 CFR 250.804 - Production safety-system testing and records.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 2 2012-07-01 2012-07-01 false Production safety-system testing and records... Gas Production Safety Systems § 250.804 Production safety-system testing and records. (a) Inspection... devices operating at temperatures which could ignite a methane-air mixture shall not be used. All...

30 CFR 250.804 - Production safety-system testing and records.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 2 2014-07-01 2014-07-01 false Production safety-system testing and records... Gas Production Safety Systems § 250.804 Production safety-system testing and records. (a) Inspection... devices operating at temperatures which could ignite a methane-air mixture shall not be used. All...

Toward an understanding of the impact of production pressure on safety performance in construction operations.

PubMed

Han, Sanguk; Saba, Farzaneh; Lee, Sanghyun; Mohamed, Yasser; Peña-Mora, Feniosky

2014-07-01

It is not unusual to observe that actual schedule and quality performances are different from planned performances (e.g., schedule delay and rework) during a construction project. Such differences often result in production pressure (e.g., being pressed to work faster). Previous studies demonstrated that such production pressure negatively affects safety performance. However, the process by which production pressure influences safety performance, and to what extent, has not been fully investigated. As a result, the impact of production pressure has not been incorporated much into safety management in practice. In an effort to address this issue, this paper examines how production pressure relates to safety performance over time by identifying their feedback processes. A conceptual causal loop diagram is created to identify the relationship between schedule and quality performances (e.g., schedule delays and rework) and the components related to a safety program (e.g., workers' perceptions of safety, safety training, safety supervision, and crew size). A case study is then experimentally undertaken to investigate this relationship with accident occurrence with the use of data collected from a construction site; the case study is used to build a System Dynamics (SD) model. The SD model, then, is validated through inequality statistics analysis. Sensitivity analysis and statistical screening techniques further permit an evaluation of the impact of the managerial components on accident occurrence. The results of the case study indicate that schedule delays and rework are the critical factors affecting accident occurrence for the monitored project. Copyright © 2013 Elsevier Ltd. All rights reserved.

Hospital nurses' working conditions in relation to motivation and patient safety.

PubMed

Toode, Kristi; Routasalo, Pirkko; Helminen, Mika; Suominen, Tarja

2015-03-01

There is a lack of empirical knowledge about nurses' perceptions of their workplace characteristics and conditions, such as level of autonomy and decision authority, work climate, teamwork, skill exploitation and learning opportunities, and their work motivation in relation to practice outputs such as patient safety. Such knowledge is needed particularly in countries, such as Estonia, where hospital systems for preventing errors and improving patient safety are in the early stages of development. This article reports the findings from a cross-sectional survey of hospital nurses in Estonia that was aimed at determining their perceptions of workplace characteristics, working conditions, work motivation and patient safety, and at exploring the relationship between these. Results suggest that perceptions of personal control over their work can affect nurses' motivation, and that perceptions of work satisfaction might be relevant to patient safety improvement work.

A mediation model linking dispatcher leadership and work ownership with safety climate as predictors of truck driver safety performance.

PubMed

Zohar, Dov; Huang, Yueng-hsiang; Lee, Jin; Robertson, Michelle

2014-01-01

The study was designed to test the effect of safety climate on safety behavior among lone employees whose work environment promotes individual rather than consensual or shared climate perceptions. The paper presents a mediation path model linking psychological (individual-level) safety climate antecedents and consequences as predictors of driving safety of long-haul truck drivers. Climate antecedents included dispatcher (distant) leadership and driver work ownership, two contextual attributes of lone work, whereas its proximal consequence included driving safety. Using a prospective design, safety outcomes, consisting of hard-braking frequency (i.e. traffic near-miss events) were collected six months after survey completion, using GPS-based truck deceleration data. Results supported the hypothesized model, indicating that distant leadership style and work ownership promote psychological safety climate perceptions, with subsequent prediction of hard-braking events mediated by driving safety. Theoretical and practical implications for studying safety climate among lone workers in general and professional drivers in particular are discussed. Copyright © 2013 Elsevier Ltd. All rights reserved.

Taking ownership of safety. What are the active ingredients of safety coaching and how do they impact safety outcomes in critical offshore working environments?

PubMed

Krauesslar, Victoria; Avery, Rachel E; Passmore, Jonathan

2015-01-01

Safety coaching interventions have become a common feature in the safety critical offshore working environments of the North Sea. Whilst the beneficial impact of coaching as an organizational tool has been evidenced, there remains a question specifically over the use of safety coaching and its impact on behavioural change and producing safe working practices. A series of 24 semi-structured interviews were conducted with three groups of experts in the offshore industry: safety coaches, offshore managers and HSE directors. Using a thematic analysis approach, several significant themes were identified across the three expert groups including connecting with and creating safety ownership in the individual, personal significance and humanisation, ingraining safety and assessing and measuring a safety coach's competence. Results suggest clear utility of safety coaching when applied by safety coaches with appropriate coach training and understanding of safety issues in an offshore environment. The current work has found that the use of safety coaching in the safety critical offshore oil and gas industry is a powerful tool in managing and promoting a culture of safety and care.

Work Safety Culture of Youth Farmworkers in North Carolina: A Pilot Study

PubMed Central

Kearney, Gregory D.; Rodriguez, Guadalupe; Quandt, Sara A.

2015-01-01

Objectives. We analyzed aspects of the behavioral, situational, and psychological elements of work safety culture of hired youth farmworkers in North Carolina. Methods. Data were from interviewer-administered questionnaires completed with 87 male and female hired farmworkers aged 10 to 17 years in North Carolina in 2013. We computed means, SDs, and Cronbach α values for the perceived work safety climate and safety perception summary scores. Results. Hired youth farmworkers in North Carolina described a negative work safety culture. Most engaged in unsafe general and unsafe work behaviors, few received training, and many were sexually harassed at work. They had mixed safety attitudes and knew that their employment was precarious. They reported a poor perceived work safety climate characterized by the perception that their supervisors “are only interested in doing the job fast and cheaply.” However, we could not detect statistically significant associations between work safety culture and injuries among these farmworkers. Conclusions. Increased scrutiny of agriculture as a suitable industry for workers as young as 10 years and additional regulations to protect hired youth farmworkers, if not to remove them from this environment, are warranted. Additional research is needed. PMID:25521896

Work zone safety : physical and behavioral barriers in accident prevention.

DOT National Transportation Integrated Search

2014-05-01

This report discusses the usefulness of creating a work zone traffic safety culture as a methodology to improve the overall : safety of both work zone personnel and the traveling public in Missouri. As part of this research, the existing MoDOT : w : ...

33 CFR 147.847 - Safety Zone; BW PIONEER Floating Production, Storage, and Offloading System Safety Zone.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Safety Zone; BW PIONEER Floating... ZONES § 147.847 Safety Zone; BW PIONEER Floating Production, Storage, and Offloading System Safety Zone. (a) Description. The BW PIONEER, a Floating Production, Storage and Offloading (FPSO) system, is in...

Work-related injury factors and safety climate perception in truck drivers.

PubMed

Anderson, Naomi J; Smith, Caroline K; Byrd, Jesse L

2017-08-01

The trucking industry has a high burden of work-related injuries. This study examined factors, such as safety climate perceptions, that may impact injury risk. A random sample of 9800 commercial driver's license holders (CDL) were sent surveys, only 4360 were eligible truck drivers. Descriptive statistics and logistic regression models were developed to describe the population and identify variables associated with work-related injury. 2189 drivers completed the pertinent interview questions. Driving less-than-truckload, daytime sleepiness, pressure to work faster, and having a poor composite score for safety perceptions were all associated with increased likelihood of work-related injury. Positive safety perception score was protective for odds of work-related injury, and increased claim filing when injured. Positive psychological safety climate is associated with decreased likelihood of work-related injury and increased likelihood that a driver injured on the job files a workers' compensation claim. © 2017 Wiley Periodicals, Inc.

Developing and testing a theoretical model linking work-family conflict to employee safety.

PubMed

Cullen, Jennifer C; Hammer, Leslie B

2007-07-01

Despite work-family conflict being recognized as a source of stress, no published research to our knowledge has considered how it negatively affects workplace safety. A theoretical model linking strain-based work-family conflict and employee safety was tested with 243 health care workers. Within this model, work-family conflict is conceptualized as a workplace hazard. As expected, strong work performance norms and high work overload were associated with higher work-family conflict; increased family-to-work conflict was associated with decreased compliance with safety rules and less willingness to participate in discretionary safety meetings. Work-to-family conflict, however, was not associated with safety. These findings underscore the importance of work redesign strategies that consider work performance norms and work-family conflict for expecting a return on investment in terms of a safer workplace. Copyright 2007 APA

Relationship of employee-reported work limitations to work productivity.

PubMed

Lerner, Debra; Amick, Benjamin C; Lee, Jennifer C; Rooney, Ted; Rogers, William H; Chang, Hong; Berndt, Ernst R

2003-05-01

Work limitation rates are crucial indicators of the health status of working people. If related to work productivity, work limitation rates may also supply important information about the economic burden of illness. Our objective was to assess the productivity impact of on-the-job work limitations due to employees' physical or mental health problems. Subjects were asked to complete a self-administered survey on the job during 3 consecutive months. Using robust regression analysis, we tested the relationship of objectively-measured work productivity to employee-reported work limitations. We attempted to survey employees of a large firm within 3 different jobs. The survey response rate was 2245 (85.9%). Full survey and productivity data were available for 1827 respondents. Each survey included a validated self-report instrument, the Work Limitations Questionnaire (WLQ). The firm provided objective, employee-level work productivity data. In adjusted regression analyses (n = 1827), employee work productivity (measured as the log of units produced/hour) was significantly associated with 3 dimensions of work limitations: limitations handling the job's time and scheduling demands (P = 0.003), physical job demands (P = 0.001), and output demands (P = 0.006). For every 10% increase in on-the-job work limitations reported on each of the 3 WLQ scales, work productivity declined approximately 4 to 5%. Employee work limitations have a negative impact on work productivity. Employee assessments of their work limitations supply important proxies for the economic burden of health problems.

[Performance and safety at work].

PubMed

Bentivegna, M

2010-01-01

The evaluative approach of occupational therapy, centred on the person, on an analysis of performance and an assessment of the work environment, can provide important information for planning interventions to increase safety at work. The reliability of work performance is influenced by many factors, some of which are not directly dependent on humans, such as those related to the environment, to materials, to spaces, to places and to the organization of work; others, however, are closely related to human behaviours. For this reason, for the purpose of ensuring prevention of all harmful events, the process of risk evaluation must also include an analysis of the role of human behaviour and functional capacity. In our daily clinical practice, we Occupational Therapists use work to promote the wellbeing and health of people by involving them in activities, with the knowledge that every occupation is perceived by an individual as something particularly personal and significant.

Employer, use of personal protective equipment, and work safety climate: Latino poultry processing workers.

PubMed

Arcury, Thomas A; Grzywacz, Joseph G; Anderson, Andrea M; Mora, Dana C; Carrillo, Lourdes; Chen, Haiying; Quandt, Sara A

2013-02-01

This analysis describes the work safety climate of Latino poultry processing workers and notes differences by worker personal characteristics and employer; describes the use of common personal protective equipment (PPE) among workers; and examines the associations of work safety climate with use of common PPE. Data are from a cross-sectional study of 403 Latino poultry processing workers in western North Carolina. Work safety climate differed little by personal characteristics, but it did differ consistently by employer. Provision of PPE varied; for example, 27.2% of participants were provide with eye protection at no cost, 57.0% were provided with hand protection at no cost, and 84.7% were provided with protective clothing at no cost. PPE use varied by type. Provision of PPE at no cost was associated with lower work safety climate; this result was counter-intuitive. Consistent use of PPE was associated with higher work safety climate. Work safety climate is important for improving workplace safety for immigrant workers. Research among immigrant workers should document work safety climate for different employers and industries, and delineate how work safety climate affects safety behavior and injuries. Copyright © 2012 Wiley Periodicals, Inc.

[Safety monitoring of cell-based medicinal products (CBMPs)].

PubMed

Funk, Markus B; Frech, Marion; Spranger, Robert; Keller-Stanislawski, Brigitte

2015-11-01

Cell-based medicinal products (CBMPs), a category of advanced-therapy medicinal products (ATMPs), are authorised for the European market by the European Commission by means of the centralized marketing authorisation. By conforming to the German Medicinal Products Act (Sec. 4b AMG), national authorisation can be granted by the Paul-Ehrlich-Institut in Germany exclusively for ATMPs not based on a routine manufacturing procedure. In both procedures, quality, efficacy, and safety are evaluated and the risk-benefit balance is assessed. For the centralised procedure, mainly controlled clinical trial data must be submitted, whereas the requirements for national procedures could be modified corresponding to the stage of development of the ATMP. After marketing authorization, the marketing authorization/license holder is obligated to report all serious adverse reactions to the competent authority and to provide periodic safety update reports. If necessary, post-authorization safety studies could be imposed. On the basis of these regulatory measures, the safety of advanced therapies can be monitored and improved.

Product safety in Great Britain and the Consumer Protection Act 1987.

PubMed

Jenkins, D W; Davies, B T

1989-09-01

The Consumer Protection Act 1987 imposes new demands on manufacturers regarding the safety of their products. They can be sued directly by any person injured by their defective goods and prosecuted if they fail to meet the new comprehensive general safety requirement and any other safety provision. Product designers and ergonomists need a sound understanding of and involvement in the legal aspects of product safety. It is now essential to take into account what may reasonably be done with goods, or foreseeable conditions of use, in order to satisfy the test of what is "reasonably safe" and meet the level of safety which "persons generally are entitled to expect" under the law. Any significant progress in product safety will now come through developments in technical standards which will be harmonised throughout the European Community. It is essential that ergonomics considerations be taken into account during the drafting of product specifications if users' interests are to be safeguarded more effectively. Ergonomists will be required to make an even greater contribution in the field of product safety, therefore, by assisting in the determination of the new statutory safety criteria. They are uniquely qualified to ensure that the product user is fully considered at the design and assessment stages which can now be looked upon as an essential pre-requisite of the law and not just sound engineering policy.

High visibility safety apparel and nighttime conspicuity of pedestrians in work zones.

PubMed

Sayer, James R; Mefford, Mary Lynn

2004-01-01

Every year numerous occupational fatalities result from pedestrians being struck by motor vehicles intruding into work zones. Attributes of retroreflective personal safety garments on pedestrian conspicuity at night were assessed in a field study. Using instrumented vehicles on a closed track, participants drove through simulated work zones attempting to detect pedestrians located in the work zones. Configuration of the retroreflective trim, trim color, placement in the work zone, and driver age significantly affected pedestrian conspicuity. Intensity and the amount of retroreflective trim did not. Personal safety garments incorporating retroreflective trim significantly improve pedestrian conspicuity in work zones. The results emphasize the importance of retroreflective trim on personal safety garments, particularly if the trim is located on garment sleeves. We examine the design attributes that contribute to making a personal safety garment conspicuous. The results have implications regarding preferred garment designs, industry standards, and service life of personal safety garments.

Psychosocial safety climate: a multilevel theory of work stress in the health and community service sector.

PubMed

Dollard, M F; McTernan, W

2011-12-01

Work stress is widely thought to be a significant problem in the health and community services sector. We reviewed evidence from a range of different data sources that confirms this belief. High levels of psychosocial risk factors, psychological health problems and workers compensation claims for stress are found in the sector. We propose a multilevel theoretical model of work stress to account for the results. Psychosocial safety climate (PSC) refers to a climate for psychological health and safety. It reflects the balance of concern by management about psychological health v. productivity. By extending the health erosion and motivational paths of the Job Demands-Resources model we propose that PSC within work organisations predicts work conditions and in turn psychological health and engagement. Over and above this, however, we expect that the external environment of the sector particularly government policies, driven by economic rationalist ideology, is increasing work pressure and exhaustion. These conditions are likely to lead to a reduced quality of service, errors and mistakes.

Role of the law in ensuring work related road safety.

PubMed

Griffith, Richard; Tengnah, Cassam

2007-12-01

Some 150 deaths and serious injuries are caused each week by people who were driving in the course of their work. The police, health and safety executive and government are seeking to improve this startling statistic by ensuring that organizations, including NHS Trusts, comply with health and safety law and fulfil their duty to carry out an assessment of risks associated with work related driving and implement a policy to minimize those risks. Failing to comply could result in prosecution by the police and health and safety executive.

U.S. Food System Working Conditions as an Issue of Food Safety.

PubMed

Clayton, Megan L; Smith, Katherine C; Pollack, Keshia M; Neff, Roni A; Rutkow, Lainie

2017-02-01

Food workers' health and hygiene are common pathways to foodborne disease outbreaks. Improving food system jobs is important to food safety because working conditions impact workers' health, hygiene, and safe food handling. Stakeholders from key industries have advanced working conditions as an issue of public safety in the United States. Yet, for the food industry, stakeholder engagement with this topic is seemingly limited. To understand this lack of action, we interviewed key informants from organizations recognized for their agenda-setting role on food-worker issues. Findings suggest that participants recognize the work standards/food safety connection, yet perceived barriers limit adoption of a food safety frame, including more pressing priorities (e.g., occupational safety); poor fit with organizational strategies and mission; and questionable utility, including potential negative consequences. Using these findings, we consider how public health advocates may connect food working conditions to food and public safety and elevate it to the public policy agenda.

Analysis of National Major Work Safety Accidents in China, 2003–2012

PubMed Central

YE, Yunfeng; ZHANG, Siheng; RAO, Jiaming; WANG, Haiqing; LI, Yang; WANG, Shengyong; DONG, Xiaomei

2016-01-01

Background: This study provides a national profile of major work safety accidents in China, which cause more than 10 fatalities per accident, intended to provide scientific basis for prevention measures and strategies to reduce major work safety accidents and deaths. Methods: Data from 2003–2012 Census of major work safety accidents were collected from State Administration of Work Safety System (SAWS). Published literature and statistical yearbook were also included to implement information. We analyzed the frequency of accidents and deaths, trend, geographic distribution and injury types. Additionally, we discussed the severity and urgency of emergency rescue by types of accidents. Results: A total of 877 major work safety accidents were reported, resulting in 16,795 deaths and 9,183 injuries. The numbers of accidents and deaths, mortality rate and incidence of major accidents have declined in recent years. The mortality rate and incidence was 0.71 and 1.20 per 106 populations in 2012, respectively. Transportation and mining contributed to the highest number of major accidents and deaths. Major aviation and railway accidents caused more casualties per incident, while collapse, machinery, electrical shock accidents and tailing dam accidents were the most severe situation that resulted in bigger proportion of death. Conclusion: Ten years’ major work safety accident data indicate that the frequency of accidents and number of eaths was declined and several safety concerns persist in some segments. PMID:27057515

Preharvest Food Safety Challenges in Beef and Dairy Production.

PubMed

Smith, David R

2016-08-01

Foods of animal origin, including beef and dairy products, are nutritious and important to global food security. However, there are important risks to human health from hazards that are introduced to beef and dairy products on the farm. Food safety hazards may be chemical, biological, or physical in nature. Considerations about protecting the safety of beef and dairy products must begin prior to harvest because some potential food safety hazards introduced at the farm (e.g., chemical residues) cannot be mitigated by subsequent postharvest food processing steps. Also, some people have preferences for consuming food that has not been through postharvest processing even though those foods may be unsafe because of microbiological hazards originating from the farm. Because of human fallibility and complex microbial ecologies, many of the preharvest hazards associated with beef and dairy products cannot entirely be eliminated, but the risk for most can be reduced through systematic interventions taken on the farm. Beef and dairy farms differ widely in production practices because of differences in natural, human, and capital resources. Therefore, the actions necessary to minimize on-farm food safety hazards must be farm-specific and they must address scientific, political, economic, and practical aspects. Notable successes in controlling and preventing on-farm hazards to food safety have occurred through a combination of voluntary and regulatory efforts.

Recommendations from the Health and Safety at Work Sub-Committee

ERIC Educational Resources Information Center

Education in Science, 1976

1976-01-01

Provides additional recommendations as the Health and Safety at Work Act of 1974 applies to the storage of flammable liquids, provision of safety equipment, responsibility for technicians and faulty apparatus. (GS)

Nuclear safety policy working group recommendations on nuclear propulsion safety for the space exploration initiative

NASA Technical Reports Server (NTRS)

Marshall, Albert C.; Lee, James H.; Mcculloch, William H.; Sawyer, J. Charles, Jr.; Bari, Robert A.; Cullingford, Hatice S.; Hardy, Alva C.; Niederauer, George F.; Remp, Kerry; Rice, John W.

1993-01-01

An interagency Nuclear Safety Working Group (NSPWG) was chartered to recommend nuclear safety policy, requirements, and guidelines for the Space Exploration Initiative (SEI) nuclear propulsion program. These recommendations, which are contained in this report, should facilitate the implementation of mission planning and conceptual design studies. The NSPWG has recommended a top-level policy to provide the guiding principles for the development and implementation of the SEI nuclear propulsion safety program. In addition, the NSPWG has reviewed safety issues for nuclear propulsion and recommended top-level safety requirements and guidelines to address these issues. These recommendations should be useful for the development of the program's top-level requirements for safety functions (referred to as Safety Functional Requirements). The safety requirements and guidelines address the following topics: reactor start-up, inadvertent criticality, radiological release and exposure, disposal, entry, safeguards, risk/reliability, operational safety, ground testing, and other considerations.

The health care work environment and adverse health and safety consequences for nurses.

PubMed

Geiger-Brown, Jeanne; Lipscomb, Jane

2010-01-01

Nurses' working conditions are inextricably linked to the quality of care that is provided to patients and patients' safety. These same working conditions are associated with health and safety outcomes for nurses and other health care providers. This chapter describes aspects of the nursing work environment that have been linked to hazards and adverse exposures for nurses, as well as the most common health and safety outcomes of nursing work. We include studies from 2000 to the present by nurse researchers, studies of nurses as subjects, and studies of workers under similar working conditions that could translate to nurses' work environment. We explore a number of work organization factors including shift work and extended work hours, safety climate and culture, teamwork, and communication. We also describe environmental hazards, including chemical hazards (e.g., waste anesthetics, hazardous drugs, cleaning compounds) and airborne and bloodborne pathogen exposure. Nurses' health and safety outcomes include physical (e.g., musculoskeletal disorders, gastrointestinal, slips, trips and falls, physical assault) and psychosocial outcomes (e.g., burnout, work-family conflict). Finally, we present recommendations for future research to further protect nurses and all health care workers from a range of hazardous working conditions.

A primer of drug safety surveillance: an industry perspective. Part II: Product labeling and product knowledge.

PubMed

Allan, M C

1992-01-01

To place the fundamentals of clinical drug safety surveillance in a conceptual framework that will facilitate understanding and application of adverse drug event data to protect the health of the public and support a market for pharmaceutical manufacturers' products. Part II of this series discusses specific issues regarding product labeling, such as developing the labeling, changing the labeling, and the legal as well as commercial ramifications of the contents of the labeling. An adverse event report scenario is further analyzed and suggestions are offered for maintaining the product labeling as an accurate reflection of the drug safety surveillance data. This article also emphasizes the necessity of product knowledge in adverse event database management. Both scientific and proprietary knowledge are required. Acquiring product knowledge is a part of the day-to-day activities of drug safety surveillance. A knowledge of the history of the product may forestall adverse publicity, as shown in the illustration. This review uses primary sources from the federal laws (regulations), commentaries, and summaries. Very complex topics are briefly summarized in the text. Secondary sources, ranging from newspaper articles to judicial summaries, illustrate the interpretation of adverse drug events and opportunities for drug safety surveillance intervention. The reference materials used were articles theoretically or practically applicable in the day-to-day practice of drug safety surveillance. The role of clinical drug safety surveillance in product monitoring and drug development is described. The process of drug safety surveillance is defined by the Food and Drug Administration regulations, product labeling, product knowledge, and database management. Database management is subdivided into the functions of receipt, retention, retrieval, and review of adverse event reports. Emphasis is placed on the dynamic interaction of the components of the process. Suggestions are offered

Shift and night work and long working hours--a systematic review of safety implications.

PubMed

Wagstaff, Anthony Sverre; Sigstad Lie, Jenny-Anne

2011-05-01

In order to devise effective preventive strategies, it is important to study workplace stressors that might increase the risk of workplace accidents - both affecting workers themselves as well as causing harm to third-parties. The aim of this report is to provide a systematic, updated overview and scientific review of empirical research regarding accidents in relation to long work hours and shift work, primarily based on epidemiological studies. The search for articles was part of a large review study on the effects of work hours on various health outcomes, safety, and performance. The search strategy included 5 international scientific databases, and nearly 7000 articles were initially identified using our search string. Following the application of inclusion and exclusion criteria, 443 publications were found and evaluated using a pre-defined scoring system. Of these, 43 concerned safety and accidents but only 14 were considered to be of high quality (total score 2 or 3 on a scale from 0-3) and therefore used for this study. Both shift work and long working hours present a substantial and well-documented detrimental effect on safety - all the studies that are included in this review have one or more significant findings in this respect. The trends are quite coherent although the increases in accident rates are mostly from 50% to 100%. In epidemiological terms, this may be seen as rather small differences. The use of such data is therefore only of importance if the accident incidence is high or if accidents may have large effects. The findings are most relevant to safety-critical activities such as the transport and health sectors. Work periods >8 hours carry an increased risk of accidents that cumulates, so that the increased risk of accidents at around 12 hours is twice the risk at 8 hours. Shift work including nights carries a substantial increased risk of accidents, whereas "pure" night work may bring some protection against this effect due to

Work zone safety analysis and modeling: a state-of-the-art review.

PubMed

Yang, Hong; Ozbay, Kaan; Ozturk, Ozgur; Xie, Kun

2015-01-01

Work zone safety is one of the top priorities for transportation agencies. In recent years, a considerable volume of research has sought to determine work zone crash characteristics and causal factors. Unlike other non-work zone-related safety studies (on both crash frequency and severity), there has not yet been a comprehensive review and assessment of methodological approaches for work zone safety. To address this deficit, this article aims to provide a comprehensive review of the existing extensive research efforts focused on work zone crash-related analysis and modeling, in the hopes of providing researchers and practitioners with a complete overview. Relevant literature published in the last 5 decades was retrieved from the National Work Zone Crash Information Clearinghouse and the Transport Research International Documentation database and other public digital libraries and search engines. Both peer-reviewed publications and research reports were obtained. Each study was carefully reviewed, and those that focused on either work zone crash data analysis or work zone safety modeling were identified. The most relevant studies are specifically examined and discussed in the article. The identified studies were carefully synthesized to understand the state of knowledge on work zone safety. Agreement and inconsistency regarding the characteristics of the work zone crashes discussed in the descriptive studies were summarized. Progress and issues about the current practices on work zone crash frequency and severity modeling are also explored and discussed. The challenges facing work zone safety research are then presented. The synthesis of the literature suggests that the presence of a work zone is likely to increase the crash rate. Crashes are not uniformly distributed within work zones and rear-end crashes are the most prevalent type of crashes in work zones. There was no across-the-board agreement among numerous papers reviewed on the relationship between work zone

The influence of farmland pollution on the quality and safety of agricultural products

NASA Astrophysics Data System (ADS)

Ma, Z. L.; Li, L. Y.; Ye, C.; Lin, X. Y.; B, C.; Wei

2018-02-01

The quality and safety of agricultural products is not only a major livelihood issues for people’s health, but also the main barriers to international trade of agricultural products nowadays. The soil is the foundation to the production of agricultural products and the guarantee of agricultural development. The farmland soil quality is directly related to the quality and safety of agricultural products. Our country’s soil has been polluted by a series of pollution, Such as the excessive discharge of industrial wastes, the encroachment of household waste, and the unreasonable use of pesticides and fertilizers. Soil degradation is a serious threat to the quality and safety of agricultural products, so eliminating soil degradation is the fundamental way out for quality and safety of agricultural products. By analyzing problems of the quality and safety of agricultural products in our country, and exploring the farmland soil influence on the quality and safety of agricultural products. This article provides a reference for improving the control level of quality and safety of agricultural products and the farmland soil quality.

Work Done For the Safety and Assurance Directorate

NASA Technical Reports Server (NTRS)

Struhar, Paul T., Jr.

2004-01-01

The Safety and Assurance Directorate (SAAD) has a vision. The vision is to be an essential part of NASA Glenn's journey to excellence. SAAD is in charge of leading safety, security, and quality and is important to our customers. When it comes to programmatic and technical decision making and implementation, SAAD provides clear safety, reliability, maintainable, quality assurance and security. I worked on a couple different things during my internship with Sandra Hardy. I did a lot of logistics for meeting and trips. I helped run the budget for the SAAD directorate. I also worked with Rich Miller for one week and we took water samples and ran tests. We also calibrated the different equipment. There is a lot more to meetings than people see. I did one for a retirement party. I had to get work orders and set up the facilities where the event is going to take place. I also set up a trip to Plum Brook Station. I had to order vans and talk with the people up there to see when a good time was. I also had to make invitations and coordinate everything. I also help Sandy run the numbers in the budget. We use excel to do this, which makes it a lot easier. things. He is in the environmental safety office. I learned how to collaborate the equipment using alpha and beta sources. I went out with him and we took water samples and tested them for conductivity and chlorine. I have learned a lot in the short time I've been here. It has been a great experience and I have has the pleasure of meeting and working with great people.

Clinically relevant safety issues associated with St. John's wort product labels.

PubMed

Clauson, Kevin A; Santamarina, Marile L; Rutledge, Jennifer C

2008-07-17

St. John's wort (SJW), used to treat depression, is popular in the USA, Canada, and parts of Europe. However, there are documented interactions between SJW and prescription medications including warfarin, cyclosporine, indinavir, and oral contraceptives. One source of information about these safety considerations is the product label. The aim of this study was to evaluate the clinically relevant safety information included on labeling in a nationally representative sample of SJW products from the USA. Eight clinically relevant safety issues were identified: drug interactions (SJW-HIV medications, SJW-immunosupressants, SJW-oral contraceptives, and SJW-warfarin), contraindications (bipolar disorder), therapeutic duplication (antidepressants), and general considerations (phototoxicity and advice to consult a healthcare professional (HCP)). A list of SJW products was identified to assess their labels. Percentages and totals were used to present findings. Of the seventy-four products evaluated, no product label provided information for all 8 evaluation criteria. Three products (4.1%) provided information on 7 of the 8 criteria. Four products provided no safety information whatsoever. Percentage of products with label information was: SJW-HIV (8.1%), SJW-immunosupressants (5.4%), SJW-OCPs (8.1%), SJW-warfarin (5.4%), bipolar (1.4%), antidepressants (23.0%), phototoxicity (51.4%), and consult HCP (87.8%). Other safety-related information on labels included warnings about pregnancy (74.3%), lactation (64.9%), discontinue if adverse reaction (23.0%), and not for use in patients under 18 years old (13.5%). The average number of a priori safety issues included on a product label was 1.91 (range 0-8) for 23.9% completeness. The vast majority of SJW products fail to adequately address clinically relevant safety issues on their labeling. A few products do provide an acceptable amount of information on clinically relevant safety issues which could enhance the quality of

Clinically relevant safety issues associated with St. John's wort product labels

PubMed Central

Clauson, Kevin A; Santamarina, Marile L; Rutledge, Jennifer C

2008-01-01

Background St. John's wort (SJW), used to treat depression, is popular in the USA, Canada, and parts of Europe. However, there are documented interactions between SJW and prescription medications including warfarin, cyclosporine, indinavir, and oral contraceptives. One source of information about these safety considerations is the product label. The aim of this study was to evaluate the clinically relevant safety information included on labeling in a nationally representative sample of SJW products from the USA. Methods Eight clinically relevant safety issues were identified: drug interactions (SJW-HIV medications, SJW-immunosupressants, SJW-oral contraceptives, and SJW-warfarin), contraindications (bipolar disorder), therapeutic duplication (antidepressants), and general considerations (phototoxicity and advice to consult a healthcare professional (HCP)). A list of SJW products was identified to assess their labels. Percentages and totals were used to present findings. Results Of the seventy-four products evaluated, no product label provided information for all 8 evaluation criteria. Three products (4.1%) provided information on 7 of the 8 criteria. Four products provided no safety information whatsoever. Percentage of products with label information was: SJW-HIV (8.1%), SJW-immunosupressants (5.4%), SJW-OCPs (8.1%), SJW-warfarin (5.4%), bipolar (1.4%), antidepressants (23.0%), phototoxicity (51.4%), and consult HCP (87.8%). Other safety-related information on labels included warnings about pregnancy (74.3%), lactation (64.9%), discontinue if adverse reaction (23.0%), and not for use in patients under 18 years old (13.5%). The average number of a priori safety issues included on a product label was 1.91 (range 0–8) for 23.9% completeness. Conclusion The vast majority of SJW products fail to adequately address clinically relevant safety issues on their labeling. A few products do provide an acceptable amount of information on clinically relevant safety issues

Does safety climate moderate the influence of staffing adequacy and work conditions on nurse injuries?

PubMed

Mark, Barbara A; Hughes, Linda C; Belyea, Michael; Chang, Yunkyung; Hofmann, David; Jones, Cheryl B; Bacon, Cynthia T

2007-01-01

Hospital nurses have one of the highest work-related injury rates in the United States. Yet, approaches to improving employee safety have generally focused on attempts to modify individual behavior through enforced compliance with safety rules and mandatory participation in safety training. We examined a theoretical model that investigated the impact on nurse injuries (back injuries and needlesticks) of critical structural variables (staffing adequacy, work engagement, and work conditions) and further tested whether safety climate moderated these effects. A longitudinal, non-experimental, organizational study, conducted in 281 medical-surgical units in 143 general acute care hospitals in the United States. Work engagement and work conditions were positively related to safety climate, but not directly to nurse back injuries or needlesticks. Safety climate moderated the relationship between work engagement and needlesticks, while safety climate moderated the effect of work conditions on both needlesticks and back injuries, although in unexpected ways. DISCUSSION AND IMPACT ON INDUSTRY: Our findings suggest that positive work engagement and work conditions contribute to enhanced safety climate and can reduce nurse injuries.

Inpatient safety outcomes following the 2011 residency work-hour reform.

PubMed

Block, Lauren; Jarlenski, Marian; Wu, Albert W; Feldman, Leonard; Conigliaro, Joseph; Swann, Jenna; Desai, Sanjay V

2014-06-01

The impact of the 2011 residency work-hour reforms on patient safety is not known. To evaluate the association between implementation of the 2011 reforms and patient safety outcomes at a large academic medical center. Observational study using difference-in-differences estimation strategy to evaluate whether safety outcomes improved among patients discharged from resident and hospitalist (nonresident) services before (2008-2011) and after (2011-2012) residency work-hour changes. All adult patients discharged from general medicine services from July 2008 through June 2012. Outcomes evaluated included length of stay, 30-day readmission, intensive care unit (ICU) admission, inpatient mortality, and presence of Maryland Hospital Acquired Conditions. Independent variables included time period (pre- vs postreform), resident versus hospitalist service, patient age at admission, race, gender, and case mix index. Patients discharged from the resident services in the postreform period had higher likelihood of an ICU stay (5.7% vs 4.5%, difference 1.4%; 95% confidence interval [CI]: 0.5% to 2.2%), and lower likelihood of 30-day readmission (17.2% vs 20.1%, difference 2.8%; 95 % CI: 1.3 to 4.3%) than patients discharged from the resident services in the prereform period. Comparing pre- and postreform periods on the resident and hospitalist services, there were no significant differences in patient safety outcomes. In the first year after implementation of the 2011 work-hour reforms relative to prior years, we found no change in patient safety outcomes in patients treated by residents compared with patients treated by hospitalists. Further study of the long-term impact of residency work-hour reforms is indicated to ensure improvement in patient safety. © 2014 Society of Hospital Medicine.

Consumer Product Safety Commission. Consumer Education Efforts for Revised Children's Sleepwear Safety Standard.

ERIC Educational Resources Information Center

General Accounting Office, Washington, DC. Health, Education, and Human Services Div.

A study examined the type and extent of consumer education that occurred since the Consumer Product Safety Commission (CPSC) amended the 1972 federal safety standards (effective January 1997) to permit marketing of snug-fitting, nonflame-resistant cotton garments as sleepwear. Three voluntary point-of-sale (POS) practices recognized as important…

Who knows the risk? A multilevel study of systematic variations in work-related safety knowledge in the European workforce.

PubMed

Dragano, Nico; Lunau, Thorsten; Eikemo, Terje A; Toch-Marquardt, Marlen; van der Wel, Kjetil A; Bambra, Clare

2015-08-01

Health and safety instructions are important components of occupational prevention. Albeit instruction is mandatory in most countries, research suggests that safety knowledge varies among the workforce. We analysed a large European sample to explore if all subgroups of employees are equally reached. In a comparative perspective, we also investigated if country-level determinants influence the variance of safety knowledge between countries. We used data on 24,534 employees from 27 countries who participated in the 2010 European Working Conditions Survey. Safety knowledge was measured as self-assessed quality of safety information. Country-level determinants were added from Eurostat databases (gross domestic product) and the European Survey of Enterprises on New and Emerging Risks (ESENER) study (% companies with A: safety plan or B: a labour inspectorate visit). Associations between knowledge, sociodemographic, occupational characteristics and macrodeterminants were studied with hierarchical regression models. In our sample, 10.1% reported a low degree of health and safety knowledge. Across all countries, younger workers, lower educated workers, production workers, private sector employees, those with less job experience or a temporary contract, or those who work in small businesses were more likely to report low levels of information. Moreover, low information prevalence varied by country. Countries with a high proportion of companies with a safety plan and recent labour inspectorate on-site visits had higher proportions of informed workers. A vast majority reported to be well informed about safety risks but systematic inequalities in the degree of knowledge between subgroups were evident. Further efforts on the workplace, the organisational and the political level are needed to universally implement existing occupational safety regulations. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to

Monitoring work zone safety and mobility impacts in Texas.

DOT National Transportation Integrated Search

2009-05-01

In this report, Texas Transportation Institute researchers identify key work zone safety and mobility : performance measures that the Texas Department of Transportation (TxDOT) should target as part of a work : zone monitoring program within a distri...

Job characteristics and work safety climate among North Carolina farmworkers with H-2A visas.

PubMed

Arcury, Thomas A; Summers, Phillip; Talton, Jennifer W; Nguyen, Ha T; Chen, Haiying; Quandt, Sara A

2015-01-01

ABSTRACT Migrant farmworkers are a vulnerable population. Migrant farmworkers with H-2A visas are the only agricultural workers with temporary work permits. Little research has directly focused on the job characteristics and work safety of workers with H-2A visas. This analysis (1) describes their personal and job characteristics, job hazards, and stressors; (2) describes their perceived work safety climate; and (3) examines associations of perceived work safety climate with job characteristics, job hazards, and stressors. Data are from a cross-sectional component of a larger study of farmworker pesticide exposure; in 2012 interviews were conducted with 163 migrant farmworkers with H-2A visas in North Carolina. The sample was limited to men aged 30 to 70 years. Migrant farmworkers with H-2A visas experience the same hazards as do other farmworkers. Their mean score on the Perceived Work Safety Climate Scale 25.5 (SD = 3.7) is similar to that of other farmworkers and other immigrant workers. Perceived work safety climate is associated with hours worked per week (P = .02), precarious employment (P < .001), planting and cultivating (P = .002), topping tobacco (P = .0012), and stress (P = .02). Perceived work safety climate is particularly important for migrant farmworkers with H-2A visas because their labor contracts limit their options to change employers. Additional research on the status of work safety climate among agricultural workers is needed, as well as on the factors that affect work safety climate and on the safety characteristics that are affected by work safety climate. Policy changes that lead to improved work safety climate should be considered.

Job Characteristics and Work Safety Climate among North Carolina Farmworkers with H-2A Visas

PubMed Central

Arcury, Thomas A.; Summers, Phillip; Talton, Jennifer W.; Nguyen, Ha T.; Chen, Haiying; Quandt, Sara A.

2016-01-01

Migrant farmworkers are a vulnerable population. Migrant farmworkers with H-2A visas are the only agricultural workers with temporary work permits. Little research has directly focused on the job characteristics and work safety of workers with H-2A visas. This analysis (1) describes their personal and job characteristics, job hazards, and stressors; (2) describes their perceived work safety climate; and (3) examines associations of perceived work safety climate with job characteristics, job hazards, and stressors. Data are from a cross-sectional component of a larger study of farmworker pesticide exposure; in 2012 interviews were conducted with 163 migrant farmworkers with H-2A visas in North Carolina. The sample was limited to men aged 30 to 70 years. Migrant farmworkers with H-2A visas experience the same hazards as do other farmworkers. Their mean score on the perceived work safety climate scale 25.5 (SD=3.7) is similar to that of other farmworkers and other immigrant workers. Perceived work safety climate is associated with hours worked per week (p=0.02), precarious employment (p<0.001), planting and cultivating (p=0.002); topping tobacco (p=0.0012), and stress (p=0.02). Perceived work safety climate is particularly important for migrant farmworkers with H-2A visas because their labor contracts limit their options to change employers. Additional research on the status of work safety climate among agricultural workers is needed, as well as on the factors that affect work safety climate and on the safety characteristics that are affected by work safety climate. Policy changes that lead to improved work safety climate should be considered. PMID:25635744

48 CFR 22.403-3 - Contract Work Hours and Safety Standards Act.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Contract Work Hours and... Standards for Contracts Involving Construction 22.403-3 Contract Work Hours and Safety Standards Act. The Contract Work Hours and Safety Standards Act (40 U.S.C. 3701 et seq.) requires that certain contracts (see...

Unstoppable The Gap Between Public Safety and Traffic Safety in the Age of Driverless Cars

DTIC Science & Technology

2017-03-01

themselves, what will the increase in traffic safety cost society in terms of public safety? • What can public safety and homeland security...industry. Safer products are more marketable products, and companies that work with law enforcement for the benefit of public safety may have an...secondary public safety benefit of crime suppression. Reasonable suspicion to stop a vehicle would be an infrequent occurrence, and the legal authority

EMS providers' perceptions of safety climate and adherence to safe work practices.

PubMed

Eliseo, Laura J; Murray, Kate A; White, Laura F; Dyer, Sophia; Mitchell, Patricia A; Fernandez, William G

2012-01-01

Occupational injuries are an important source of morbidity for emergency medical services (EMS) providers. Previous work has shown that employee perceptions of an organization's commitment to safety (i.e., safety climate) correlate with adherence to safe practices. To assess the association between perceived safety climate and compliance with safety procedures in an urban EMS system with >100,000 calls/year. EMS providers were issued a self-administered survey that included questions on demographics, years of experience, perceived safety climate, and adherence to safety procedures. Safety climate was assessed with a 20-item validated instrument. Adherence to safety procedures was assessed with a nine-item list of safety behaviors. Strict adherence to safety procedures was defined as endorsing "agree" or "strongly agree" on 80% of items. The effect of safety climate on compliance with safe practices was estimated using multiple logistic regression. One hundred ninety-six of 221 providers (89%) completed surveys; 74% were male; the median age was 36-40 years; and the median amount of experience was 8 years. One hundred twenty-seven of 196 respondents (65%) reported strict adherence to safe work practice. Factor analysis confirmed the original six-factor grouping of questions; frequent safety-related feedback/training was significantly associated with safe practices (odds ratio [OR] = 2.14, 95% confidence interval [CI] = 1.01-4.51). EMS workers perceiving a high degree of perceived safety climate was associated with twofold greater odds of self-reported level of strict adherence to safe work practices. Frequent safety-related feedback/training was the one dimension of safety climate that had the strongest association with adherence to safe workplace behaviors.

The role of work habits in the motivation of food safety behaviors.

PubMed

Hinsz, Verlin B; Nickell, Gary S; Park, Ernest S

2007-06-01

The authors considered work habits within an integrated framework of motivated behavior. A distinction made between automatic and controlled action led to 2 measures of work habits: a habit strength measure reflecting the 4 characteristics of automaticity and a measure of work routines under conscious control. Workers at a turkey processing plant (N = 162) responded to an extensive survey of these work habits measures with regard to food safety. Results indicated that attitudes and subjective norms predicted food safety intentions. These intentions, along with perceived behavior control and work habits, predicted reports of food safety behaviors. A mediation analysis indicated that the work routines measure accounted for the variance in self-reported behavior and mediated any effect of the habit strength measure. ((c) 2007 APA, all rights reserved).

Organizational culture and a safety-conscious work environment: The mediating role of employee communication satisfaction.

PubMed

Silla, Inmaculada; Navajas, Joaquin; Koves, G Kenneth

2017-06-01

A safety-conscious work environment allows high-reliability organizations to be proactive regarding safety and enables employees to feel free to report any concern without fear of retaliation. Currently, research on the antecedents to safety-conscious work environments is scarce. Structural equation modeling was applied to test the mediating role of employee communication satisfaction in the relationship between constructive culture and a safety-conscious work environment in several nuclear power plants. Employee communication satisfaction partially mediated the positive relationships between a constructive culture and a safety-conscious work environment. Constructive cultures in which cooperation, supportive relationships, individual growth and high performance are encouraged facilitate the establishment of a safety-conscious work environment. This influence is partially explained by increased employee communication satisfaction. Constructive cultures should be encouraged within organizations. In addition, managers should promote communication policies and practices that support a safety-conscious work environment. Copyright © 2017 Elsevier Ltd and National Safety Council. All rights reserved.

Working Safety in Confined Spaces. Module SH-32. Safety and Health.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on working safely in confined spaces in one of 50 modules concerned with job safety and health. This module explains how to recognize potential hazards in confined spaces, how to deal with these hazards, and how planning can prevent accidents. Following the introduction, 17 objectives (each keyed to a page in the text) the…

Work support, psychological well-being and safety performance among nurses in Hong Kong.

PubMed

Wong, Kenchi C K

2018-02-06

This study investigated the mediating role of psychological well-being between work support and safety performance of 314 Hong Kong nurses, using self-reported questionnaires. Results showed that psychological well-being mediated the effects of work support on safety performance. The findings illustrate that work support was an important element to improve psychological well-being. This could generate better safety performance of the nurses. Implications and limitations are discussed.

Occupational health and safety aspects of animal handling in dairy production.

PubMed

Lindahl, Cecilia; Lundqvist, Peter; Hagevoort, G Robert; Lunner Kolstrup, Christina; Douphrate, David I; Pinzke, Stefan; Grandin, Temple

2013-01-01

Livestock handling in dairy production is associated with a number of health and safety issues. A large number of fatal and nonfatal injuries still occur when handling livestock. The many animal handling tasks on a dairy farm include moving cattle between different locations, vaccination, administration of medication, hoof care, artificial insemination, ear tagging, milking, and loading onto trucks. There are particular problems with bulls, which continue to cause considerable numbers of injuries and fatalities in dairy production. In order to reduce the number of injuries during animal handling on dairy farms, it is important to understand the key factors in human-animal interactions. These include handler attitudes and behavior, animal behavior, and fear in cows. Care when in close proximity to the animal is the key for safe handling, including knowledge of the flight zone, and use of the right types of tools and suitable restraint equipment. Thus, in order to create safe working conditions during livestock handling, it is important to provide handlers with adequate training and to establish sound safety management procedures on the farm.

30 CFR 6.30 - MSHA listing of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false MSHA listing of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.30 MSHA listing of equivalent non-MSHA product safety standards. MSHA evaluated the following non-MSHA product safety standards and determined that they provide...

30 CFR 6.30 - MSHA listing of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false MSHA listing of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.30 MSHA listing of equivalent non-MSHA product safety standards. MSHA evaluated the following non-MSHA product safety standards and determined that they provide...

30 CFR 6.30 - MSHA listing of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false MSHA listing of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.30 MSHA listing of equivalent non-MSHA product safety standards. MSHA evaluated the following non-MSHA product safety standards and determined that they provide...

30 CFR 6.30 - MSHA listing of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false MSHA listing of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.30 MSHA listing of equivalent non-MSHA product safety standards. MSHA evaluated the following non-MSHA product safety standards and determined that they provide...

30 CFR 6.30 - MSHA listing of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false MSHA listing of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.30 MSHA listing of equivalent non-MSHA product safety standards. MSHA evaluated the following non-MSHA product safety standards and determined that they provide...

30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

Climate change impact on microclimate of work environment related to occupational health and productivity.

PubMed

Marchetti, Enrico; Capone, Pasquale; Freda, Daniela

2016-01-01

Climate change is a global emergency that influences human health and occupational safety. Global warming characterized by an increase in temperature of the ambience and humidity affects human health directly impairing body thermoregulation with serious consequences: dehydration, fatigue, heat stroke and even death. Several studies have demonstrated negative effects of climate change on working populations in a wide variety of workplaces with particular regard to outdoor and uncooled indoor workplaces. Most vulnerable workers are outdoor workers in tropical and subtropical countries usually involved in heavy labor during hot seasons. Many of the consequences therefore, regarding working people are possible, even without health symptoms by reducing work productivity. The scope of this review is to investigate effects of climate change on workers both in relation to health and work productivity. This study has been realized by analyzing recent international literature. In order to reduce negative effects of climate change on working populations it is essential to implement preventive measures with a multidisciplinary strategy limiting health risks and improving work productivity.

Thrill and adventure seeking in risky driving at work: The moderating role of safety climate.

PubMed

Wishart, Darren; Somoray, Klaire; Evenhuis, Amanda

2017-12-01

Introduction Within many industrialized countries, the leading cause of worker fatalities and serious injuries can be attributed to road trauma. In non-occupational research, high levels of sensation seeking personality, and specifically thrill and adventure seeking, have been associated with risky driving behaviors. In work driving literature, high organizational safety climate has been associated with reduced risky driving in work drivers. However, the extent that factors such as safety climate and thrill seeking interact in regard to work driving safety remains unclear, and the current research examined this interaction. Methods A total of 1,011 work drivers from four organizations participated in the research. Surveys were distributed online and hardcopies were sent via mail. The survey included measures of thrill and adventure seeking, safety climate and work-related driving behaviors, as well as questions relating to participant demographics and information about their work driving. Results The results demonstrated that safety climate significantly moderated the effect of thrill and adventure seeking trait on driving errors, driving violations, and driving while fatigued. Conclusion These results suggest that the development of a strong safety climate has the potential to improve work driving safety outcomes by reducing the impact of particular personality traits such as thrill seeking within an organizational context. Practical application To improve work driving safety, organizations and management need to develop strategies to encourage and foster positive work driving safety climate, particularly within work settings that may attract thrill and adventure seeking employees. Copyright © 2017. Published by Elsevier Ltd.

Developing an OMERACT Core Outcome Set for Assessing Safety Components in Rheumatology Trials: The OMERACT Safety Working Group.

PubMed

Klokker, Louise; Tugwell, Peter; Furst, Daniel E; Devoe, Dan; Williamson, Paula; Terwee, Caroline B; Suarez-Almazor, Maria E; Strand, Vibeke; Woodworth, Thasia; Leong, Amye L; Goel, Niti; Boers, Maarten; Brooks, Peter M; Simon, Lee S; Christensen, Robin

2017-12-01

Failure to report harmful outcomes in clinical research can introduce bias favoring a potentially harmful intervention. While core outcome sets (COS) are available for benefits in randomized controlled trials in many rheumatic conditions, less attention has been paid to safety in such COS. The Outcome Measures in Rheumatology (OMERACT) Filter 2.0 emphasizes the importance of measuring harms. The Safety Working Group was reestablished at the OMERACT 2016 with the objective to develop a COS for assessing safety components in trials across rheumatologic conditions. The safety issue has previously been discussed at OMERACT, but without a consistent approach to ensure harms were included in COS. Our methods include (1) identifying harmful outcomes in trials of interventions studied in patients with rheumatic diseases by a systematic literature review, (2) identifying components of safety that should be measured in such trials by use of a patient-driven approach including qualitative data collection and statistical organization of data, and (3) developing a COS through consensus processes including everyone involved. Members of OMERACT including patients, clinicians, researchers, methodologists, and industry representatives reached consensus on the need to continue the efforts on developing a COS for safety in rheumatology trials. There was a general agreement about the need to identify safety-related outcomes that are meaningful to patients, framed in terms that patients consider relevant so that they will be able to make informed decisions. The OMERACT Safety Working Group will advance the work previously done within OMERACT using a new patient-driven approach.

30 CFR 250.804 - Production safety-system testing and records.

Code of Federal Regulations, 2011 CFR

2011-07-01

... ENFORCEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Production Safety Systems § 250.804 Production safety-system testing and records. (a... excess of 200 cubic centimeters per minute or a gas leakage rate in excess of 5 cubic feet per minute is...

Product Safety: "An Ounce of Prevention". Health and the Consumer.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Elementary and Secondary Education.

Secondary level students learn about product safety in this consumer education learning activity package, which is one of a series. While the majority of products are safe, there remains a small percentage of consumer goods which reach the market place containing a real or potential hazard to the consumer's safety. This module is designed to make…

23 CFR 630.1106 - Policy and procedures for work zone safety management.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false Policy and procedures for work zone safety management... Policy and procedures for work zone safety management. (a) Each agency's policy and processes, procedures... established in accordance with 23 CFR 630.1006, shall include the consideration and management of road user...

Development of requirements on safety cases of machine industry products for power engineering

NASA Astrophysics Data System (ADS)

Aronson, K. E.; Brezgin, V. I.; Brodov, Yu. M.; Gorodnova, N. V.; Kultyshev, A. Yu.; Tolmachev, V. V.; Shablova, E. G.

2016-12-01

This article considers security assurance for power engineering machinery in the design and production phases. The Federal Law "On Technical Regulation" and the Customs Union Technical Regulations "On Safety of Machinery and Equipment" are analyzed in the legal, technical, and economic aspect with regard to power engineering machine industry products. From the legal standpoint, it is noted that the practical enforcement of most norms of the Law "On Technical Regulation" makes it necessary to adopt subordinate statutory instruments currently unavailable; moreover, the current level of adoption of technical regulations leaves much to be desired. The intensive integration processes observed in the Eurasian Region in recent years have made it a more pressing task to harmonize the laws of the region's countries, including their technical regulation framework. The technical aspect of analyzing the technical regulation of the Customs Union has been appraised by the IDEF0 functional modeling method. The object of research is a steam turbine plant produced at the turbine works. When developing the described model, we considered the elaboration of safety case (SC) requirements from the standpoint of the chief designer of the turbine works as the person generally responsible for the elaboration of the SC document. The economic context relies on risk analysis and appraisal methods. In their respect, these are determined by the purposes and objectives of analysis, complexity of considered objects, availability of required data, and expertise of specialists hired to conduct the analysis. The article proposes the description of all sources of hazard and scenarios of their actualization in all production phases of machinery life cycle for safety assurance purposes. The detection of risks and hazards allows forming the list of unwanted events. It describes the sources of hazard, various risk factors, conditions for their rise and development, tentative risk appraisals, and

78 FR 40146 - Patient Safety Organizations: Voluntary Relinquishment From Northern Metropolitan Patient Safety...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-03

.... The delisting was effective at 12:00 Midnight ET (2400) on May 29, 2013. ADDRESSES: Both directories... (2400) on May 29, 2013. Northern Metropolitan Patient Safety Institute has patient safety work product...

Associations of Organizational Safety Practices and Culture With Physical Workload, Perceptions About Work, and Work-Related Injury and Symptoms Among Hospital Nurses.

PubMed

Lee, Soo-Jeong; Lee, Joung Hee

The study aim was to examine the relationships of organizational safety practices with nurses' perceptions about job and risk and experiences of work-related injury and symptoms. Nursing professions report high rates of work-related injuries. Organizational safety practices have been linked to workers' safety outcomes and perceptions about work. This study analyzed data from a random sample of 280 California RNs in a cross-sectional statewide survey. Data were collected by both postal and online surveys. Higher perceptions of organizational safety practices (safety climate, ergonomic practices, people-oriented culture) were significantly associated with lower physical workload, lower job strain, higher job satisfaction, lower risk perception, and lower work-related injury and symptom experiences. Ergonomic practices and people-oriented culture were associated with less intention of leaving job. Organizational safety practices may play a pivotal role in improving positive perceptions about jobs, reducing injury risks, and promoting nurse retention.

[Preclinical evaluation of the safety of biotechnology products: specific aspects].

PubMed

Descotes, Jacques; Ravel, Guillaume; Vial, Thierry

2003-01-01

Biotechnology-derived products represent a class of increasingly numerous drugs. One of their major characteristics is extreme diversity, which requires specific approaches for the preclinical evaluation of their safety. The selection of relevant animal species is not easy, as most of these products are human-specific. Thus, only one species will often be used, i.e. primates. As most of these products are large molecules, they can be directly immunogenic. When they are human-specific, no animal model is available to predict the risk. Many biotechnology-derived products have an expected influence on the immune system. This must be taken into account in the preclinical strategy of immunotoxicity evaluation that is now required for every new drug. As conventional toxicity testing is generally limited, safety pharmacology studies should include more than the core battery of assays required by current guidelines in order to complement missing data as much as possible. Because of these particularities, a comprehensive investigation of metabolism and pharmacokinetics is not usually needed. Some products can cross-react with cellular components not intended as therapeutic targets. It is, therefore, essential to rule out the risk of possible cross-reactions that can result in adverse effects. Finally, viral safety is a crucial component of the preclinical safety evaluation of these products. Overall, biotechnology-derived products raise specific issues because of their innovative and original characteristics, and it is difficult to address all these issues if not by using a case-by-case approach.

Preventive Effects of Safety Helmets on Traumatic Brain Injury after Work-Related Falls

PubMed Central

Kim, Sang Chul; Ro, Young Sun; Shin, Sang Do; Kim, Joo Yeong

2016-01-01

Introduction: Work-related traumatic brain injury (TBI) caused by falls is a catastrophic event that leads to disabilities and high socio-medical costs. This study aimed to measure the magnitude of the preventive effect of safety helmets on clinical outcomes and to compare the effect across different heights of fall. Methods: We collected a nationwide, prospective database of work-related injury patients who visited the 10 emergency departments between July 2010 and October 2012. All of the adult patients who experienced work-related fall injuries were eligible, excluding cases with unknown safety helmet use and height of fall. Primary and secondary endpoints were intracranial injury and in-hospital mortality. We calculated adjusted odds ratios (AORs) of safety helmet use and height of fall for study outcomes, and adjusted for any potential confounders. Results: A total of 1298 patients who suffered from work-related fall injuries were enrolled. The industrial or construction area was the most common place of fall injury occurrence, and 45.0% were wearing safety helmets at the time of fall injuries. The safety helmet group was less likely to have intracranial injury comparing with the no safety helmet group (the adjusted odds ratios (ORs) (95% confidence interval (CI)): 0.42 (0.24–0.73)), however, there was no statistical difference of in-hospital mortality between two groups (the adjusted ORs (95% CI): 0.83 (0.34–2.03). In the interaction analysis, preventive effects of safety helmet on intracranial injury were significant within 4 m height of fall. Conclusions: A safety helmet is associated with prevention of intracranial injury resulting from work-related fall and the effect is preserved within 4 m height of fall. Therefore, wearing a safety helmet can be an intervention for protecting fall-related intracranial injury in the workplace. PMID:27801877

Preventive Effects of Safety Helmets on Traumatic Brain Injury after Work-Related Falls.

PubMed

Kim, Sang Chul; Ro, Young Sun; Shin, Sang Do; Kim, Joo Yeong

2016-10-29

Work-related traumatic brain injury (TBI) caused by falls is a catastrophic event that leads to disabilities and high socio-medical costs. This study aimed to measure the magnitude of the preventive effect of safety helmets on clinical outcomes and to compare the effect across different heights of fall. We collected a nationwide, prospective database of work-related injury patients who visited the 10 emergency departments between July 2010 and October 2012. All of the adult patients who experienced work-related fall injuries were eligible, excluding cases with unknown safety helmet use and height of fall. Primary and secondary endpoints were intracranial injury and in-hospital mortality. We calculated adjusted odds ratios (AORs) of safety helmet use and height of fall for study outcomes, and adjusted for any potential confounders. A total of 1298 patients who suffered from work-related fall injuries were enrolled. The industrial or construction area was the most common place of fall injury occurrence, and 45.0% were wearing safety helmets at the time of fall injuries. The safety helmet group was less likely to have intracranial injury comparing with the no safety helmet group (the adjusted odds ratios (ORs) (95% confidence interval (CI)): 0.42 (0.24-0.73)), however, there was no statistical difference of in-hospital mortality between two groups (the adjusted ORs (95% CI): 0.83 (0.34-2.03). In the interaction analysis, preventive effects of safety helmet on intracranial injury were significant within 4 m height of fall. A safety helmet is associated with prevention of intracranial injury resulting from work-related fall and the effect is preserved within 4 m height of fall. Therefore, wearing a safety helmet can be an intervention for protecting fall-related intracranial injury in the workplace.

Safety evaluation of joint and conventional lane merge configurations for freeway work zones.

PubMed

Ishak, Sherif; Qi, Yan; Rayaprolu, Pradeep

2012-01-01

Inefficient operation of traffic in work zone areas not only leads to an increase in travel time delays, queue length, and fuel consumption but also increases the number of forced merges and roadway accidents. This study evaluated the safety performance of work zones with a conventional lane merge (CLM) configuration in Louisiana. Analysis of variance (ANOVA) was used to compare the crash rates for accidents involving fatalities, injuries, and property damage only (PDO) in each of the following 4 areas: (1) advance warning area, (2) transition area, (3) work area, and (4) termination area. The analysis showed that the advance warning area had higher fatality, injury, and PDO crash rates when compared to the transition area, work area, and termination area. This finding confirmed the need to make improvements in the advance warning area where merging maneuvers take place. Therefore, a new lane merge configuration, called joint lane merge (JLM), was proposed and its safety performance was examined and compared to the conventional lane merge configuration using a microscopic simulation model (VISSIM), which was calibrated with real-world data from an existing work zone on I-55 and used to simulate a total of 25 different scenarios with different levels of demand and traffic composition. Safety performance was evaluated using 2 surrogate measures: uncomfortable decelerations and speed variance. Statistical analysis was conducted to determine whether the differences in safety performance between both configurations were significant. The safety analysis indicated that JLM outperformed CLM in most cases with low to moderate flow rates and that the percentage of trucks did not have a significant impact on the safety performance of either configuration. Though the safety analysis did not clearly indicate which lane merge configuration is safer for the overall work zone area, it was able to identify the possibly associated safety changes within the work zone area under

Suggested revisions to the annual highway safety work program in Virginia.

DOT National Transportation Integrated Search

1976-01-01

This paper describes some suggested revisions in the format of and method and procedures for compiling the Annual Highway Safety Work Program (AHSWP) required of the states by the National Highway Traffic Safety Administration (NHTSA). Prior to fisca...

23 CFR 630.1006 - Work zone safety and mobility policy.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Work zone safety and mobility policy. 630.1006 Section... policy. Each State shall implement a policy for the systematic consideration and management of work zone impacts on all Federal-aid highway projects. This policy shall address work zone impacts throughout the...

Walking and Working Surfaces. Module SH-06. Safety and Health.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on walking and working surfaces is one of 50 modules concerned with job safety and health. This module describes safety requirements for floors, stairways, ladders, and scaffolds, as well as OSHA standards for the construction, use, and maintenance of each of these. Following the introduction, nine objectives (each keyed to a…

Upper Limb Absence: Predictors of Work Participation and Work Productivity.

PubMed

Postema, Sietke G; Bongers, Raoul M; Brouwers, Michael A; Burger, Helena; Norling-Hermansson, Liselotte M; Reneman, Michiel F; Dijkstra, Pieter U; van der Sluis, Corry K

2016-06-01

To analyze work participation, work productivity, contributing factors, and physical work demands of individuals with upper limb absence (ULA). Cross-sectional study: postal survey (response rate, 45%). Twelve rehabilitation centers and orthopedic workshops. Individuals (n=207) with unilateral transverse upper limb reduction deficiency (RD) or acquired amputation (AA), at or proximal to the carpal level, between the ages of 18 and 65 years, and a convenience sample of control subjects (n=90) matched on age and sex. Not applicable. Employment status, self-reported work productivity measured with the Quality-Quantity method, and self-reported upper extremity work demands measured with the Upper Extremity Work Demands scale. Seventy-four percent of the individuals with RD and 57% of the individuals with AA were employed (vs 82% of the control group and 66% of the general population). Male sex, younger age, a medium or higher level of education, prosthesis use, and good general health were predictors of work participation. Work productivity was similar to that of the control group. Higher work productivity was inversely related to musculoskeletal complaint-related pain. When having predominantly mentally demanding work, individuals with ULA perceived higher upper extremity work demands compared with controls. Work participation of individuals with RD was slightly higher compared with that of the general population, whereas employment rates of individuals with AA were slightly lower. Furthermore, work productivity did not differ between individuals with RD, AA, and controls. Copyright © 2016 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

49 CFR 236.907 - Product Safety Plan (PSP).

Code of Federal Regulations, 2013 CFR

2013-10-01

... railroad operation or categories of operations on which the product is designed to be used, including train... comprehensive description of all hazards to be addressed in the system design and development, mitigation... the safety assurance concepts used in the product design, including an explanation of the design...

49 CFR 236.907 - Product Safety Plan (PSP).

Code of Federal Regulations, 2010 CFR

2010-10-01

... railroad operation or categories of operations on which the product is designed to be used, including train... comprehensive description of all hazards to be addressed in the system design and development, mitigation... the safety assurance concepts used in the product design, including an explanation of the design...

49 CFR 236.907 - Product Safety Plan (PSP).

Code of Federal Regulations, 2014 CFR

2014-10-01

... railroad operation or categories of operations on which the product is designed to be used, including train... comprehensive description of all hazards to be addressed in the system design and development, mitigation... the safety assurance concepts used in the product design, including an explanation of the design...

Exploring the Influence of Nurse Work Environment and Patient Safety Culture on Attitudes Toward Incident Reporting.

PubMed

Yoo, Moon Sook; Kim, Kyoung Ja

2017-09-01

The aim of this study was to explore the influence of nurse work environments and patient safety culture on attitudes toward incident reporting. Patient safety culture had been known as a factor of incident reporting by nurses. Positive work environment could be an important influencing factor for the safety behavior of nurses. A cross-sectional survey design was used. The structured questionnaire was administered to 191 nurses working at a tertiary university hospital in South Korea. Nurses' perception of work environment and patient safety culture were positively correlated with attitudes toward incident reporting. A regression model with clinical career, work area and nurse work environment, and patient safety culture against attitudes toward incident reporting was statistically significant. The model explained approximately 50.7% of attitudes toward incident reporting. Improving nurses' attitudes toward incident reporting can be achieved with a broad approach that includes improvements in work environment and patient safety culture.

77 FR 58567 - Information Collection Activities: Well Control and Production Safety Training, Submitted for...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-21

...-0006; OMB Number 1014-0008] Information Collection Activities: Well Control and Production Safety... requirements in the regulations under Subpart O, ``Well Control and Production Safety Training.'' This notice... and Production Safety Training. OMB Control Number: 1014-0008. Abstract: The Outer Continental Shelf...

Security warning method and system for worker safety during live-line working

NASA Astrophysics Data System (ADS)

Jiang, Chilong; Zou, Dehua; Long, Chenhai; Yang, Miao; Zhang, Zhanlong; Mei, Daojun

2017-09-01

Live-line working is an essential part in the operations in an electric power system. Live-line workers are required to wear shielding clothing. Shielding clothing, however, acts as a closed environment for the human body. Working in a closed environment for a long time can change the physiological responses of the body and even endanger personal safety. According to the typical conditions of live-line working, this study synthesizes environmental factors related to shielding clothing and the physiological factors of the body to establish the heart rate variability index RMSSD and the comprehensive security warning index SWI. On the basis of both indices, this paper proposes a security warning method and system for the safety live-line workers. The system can monitor the real-time status of workers during live-line working to provide security warning and facilitate the effective safety supervision by the live operation center during actual live-line working.

Efficacy and Safety of Pomegranate Medicinal Products for Cancer

PubMed Central

Vlachojannis, Christian

2015-01-01

Preclinical in vitro and in vivo studies demonstrate potent effects of pomegranate preparations in cancer cell lines and animal models with chemically induced cancers. We have carried out one systematic review of the effectiveness of pomegranate products in the treatment of cancer and another on their safety. The PubMed search provided 162 references for pomegranate and cancer and 122 references for pomegranate and safety/toxicity. We identified 4 clinical studies investigating 3 pomegranate products, of which one was inappropriate because of the low polyphenol content. The evidence of clinical effectiveness was poor because the quality of the studies was poor. Although there is no concern over safety with the doses used in the clinical studies, pomegranate preparations may be harmful by inducing synthetic drug metabolism through activation of liver enzymes. We have analysed various pomegranate products for their content of anthocyanins, punicalagin, and ellagic acid in order to compare them with the benchmark doses from published data. If the amount of coactive constituents is not declared, patients risk not benefiting from the putative pomegranate effects. Moreover, pomegranate end products are affected by many determinants. Their declaration should be incorporated into the regulatory guidance and controlled before pomegranate products enter the market. PMID:25815026

Factors impacting perceived safety among staff working on mental health wards

PubMed Central

Brown, Andrew; McCabe, Rhiannah; Rogerson, Michelle; Whittington, Richard

2017-01-01

Background Safety at work is a core issue for mental health staff working on in-patient units. At present, there is a limited theoretical base regarding which factors may affect staff perceptions of safety. Aims This study attempted to identify which factors affect perceived staff safety working on in-patient mental health wards. Method A cross-sectional design was employed across 101 forensic and non-forensic mental health wards, over seven National Health Service trusts nationally. Measures included an online staff survey, Ward Features Checklist and recorded incident data. Data were analysed using categorical principal components analysis and ordinal regression. Results Perceptions of staff safety were increased by ward brightness, higher number of patient beds, lower staff to patient ratios, less dayroom space and more urban views. Conclusions The findings from this study do not represent common-sense assumptions. Results are discussed in the context of the literature and may have implications for current initiatives aimed at managing in-patient violence and aggression. Declaration of interest None. Copyright and usage © The Royal College of Psychiatrists 2017. This is an open access article distributed under the terms of the Creative Commons Attribution (CC BY) license. PMID:28904814

Factors impacting perceived safety among staff working on mental health wards.

PubMed

Haines, Alina; Brown, Andrew; McCabe, Rhiannah; Rogerson, Michelle; Whittington, Richard

2017-09-01

Safety at work is a core issue for mental health staff working on in-patient units. At present, there is a limited theoretical base regarding which factors may affect staff perceptions of safety. This study attempted to identify which factors affect perceived staff safety working on in-patient mental health wards. A cross-sectional design was employed across 101 forensic and non-forensic mental health wards, over seven National Health Service trusts nationally. Measures included an online staff survey, Ward Features Checklist and recorded incident data. Data were analysed using categorical principal components analysis and ordinal regression. Perceptions of staff safety were increased by ward brightness, higher number of patient beds, lower staff to patient ratios, less dayroom space and more urban views. The findings from this study do not represent common-sense assumptions. Results are discussed in the context of the literature and may have implications for current initiatives aimed at managing in-patient violence and aggression. None. © The Royal College of Psychiatrists 2017. This is an open access article distributed under the terms of the Creative Commons Attribution (CC BY) license.

Poor safety climate, long work hours, and musculoskeletal discomfort among Latino horse farm workers.

PubMed

Swanberg, Jennifer; Clouser, Jessica Miller; Gan, Wenqi; Flunker, John C; Westneat, Susan; Browning, Steven R

2017-09-03

This study investigated the prevalence of self-reported musculoskeletal discomfort (MSD) and work-related factors associated with elevated MSD among Latino thoroughbred farm workers. Participants (N = 225) were recruited using a community-based purposive sampling approach to participate in in-person interviews. Of these workers, 85% experienced MSD. MSD was divided into tertiles; the upper tertile was defined as elevated. Multivariable Poisson regression revealed associations between any elevated MSD and longer tenure on horse farms, longer work hours, and poor safety climate. Elevated neck/back MSD was associated with longer tenure, longer work hours, and poor safety climate. Elevated upper extremity MSD was associated with age and poor safety climate. Elevated lower extremity MSD was associated with longer tenure, longer work hours, and being female. Musculoskeletal discomfort is common among these workers. Improving safety climate and minimizing long work hours is recommended.

Assessment of occupational health and safety hazard exposures among working college students.

PubMed

Balanay, Jo Anne G; Adesina, Adepeju; Kearney, Gregory D; Richards, Stephanie L

2014-01-01

Adolescents and young adults have higher injury rates than their adult counterparts in similar jobs. This study used the working college student population to assess health and safety hazards in the workplace, characterize related occupational diseases and injuries, and describe worker health/safety activities provided by employers. College students (≥17 years old) were assessed via online surveys about work history, workplace exposure to hazards, occupational diseases/injuries, and workplace health/safety activities. Approximately half (51%) of participants (n = 1,147) were currently employed at the time of the survey or had been employed while enrolled in college. Restaurants (other than fast food) were the most frequently reported work setting. The most reported workplace hazards included noise exposure and contact with hot liquids/surfaces. Twenty percent of working students experienced injury at work; some injuries were severe enough to limit students' normal activities for >3 days (30%) or require medical attention (44%). Men had significantly higher prevalence of injuries (P = 0.05) and near-misses (P < 0.01) at work than women. Injury occurrence was associated with near-misses (AOR = 5.08, P < 0.01) and co-worker injuries (AOR = 3.19, P < 0.01) after gender and age adjustments. Most (77%) received worker safety training and half were given personal protective equipment (PPE) by their employers. Risk reduction from workplace injuries and illnesses among working college students may be achieved by implementing occupational health and safety (OHS) strategies including incorporation of OHS in the college curriculum, promotion of OHS by university/college student health services, and improving awareness of OHS online resources among college students, employers, and educators. © 2013 Wiley Periodicals, Inc.

75 FR 21602 - Online Safety and Technology Working Group Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-26

... OSTWG is tasked with evaluating industry efforts to promote a safe online environment for children. The... and Technology Working Group Meeting AGENCY: National Telecommunications and Information... public meeting of the Online Safety and Technology Working Group (OSTWG). DATES: The meeting will be held...

Fatigue in seafarers working in the offshore oil and gas re-supply industry: effects of safety climate, psychosocial work environment and shift arrangement.

PubMed

Hystad, Sigurd W; Saus, Evelyn-Rose; Sætrevik, Bjørn; Eid, Jarle

2013-01-01

This study examined the influence of safety climate and psychosocial work environment on the reported fatigue of seafarers working in the offshore oil and gas re-supply industry (n = 402). We found that seafarers who reported high psychological demands and perceived the organisational-level safety climate negatively,reported significantly more mental fatigue, physical fatigue, and lack of energy. In addition, seafarers who reported having high levels of job control reported being significantly less mentally fatigued. We also found some combined effects of safety climate and shift arrangement. Organisational-level safety climate did not influence the levels of physical fatigue in seafarers working on the night shift. On the contrary, seafarers working during the days reported to be more physically fatigued when they perceived the organisational-level climate to be negative compared with the positive. The opposite effect was found for group-level safety climate: seafarers working during the nights reported to be more physically fatigued when they perceived the group-level climate to be negative compared with the positive. The results from this study point to the importance of taking into consideration aspects of the psychosocial work environment and safety climate,and their potential impact on fatigue and safety in the maritime organisations.

Assessing safety of herbal products for menopausal complaints: an international perspective.

PubMed

Dog, Tieraona Low; Marles, Robin; Mahady, Gail; Gardiner, Paula; Ko, Richard; Barnes, Jo; Chavez, Mary L; Griffiths, James; Giancaspro, Gabriel; Sarma, Nandakumara D

2010-08-01

Future research of herbal products for menopausal women should include long-term safety assessments because women may use these products for prolonged periods of time. Growing numbers of women take prescription medications and concurrently use herbal products for alleviation of menopausal symptoms. Because of possible herb-drug interactions, both drug and supplement manufacturers should provide basic pharmacokinetic data to reduce the risk of adverse interactions. In addition, herbal products produced to high quality standards are essential for ensuring consumer safety. Regulatory frameworks must be in place to ensure that herbal ingredients' identities have been verified, that they have been properly quantified per unit dose, that the product is within tolerance limits for contaminants, that the product's safety and effectiveness under the recommended conditions of use have been assessed before sale to the public, and that a system is in place to detect and deal with adverse reactions when they arise. This article explores these and related concerns. Copyright 2010. Published by Elsevier Ireland Ltd.

75 FR 1338 - Online Safety and Technology Working Group Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-11

... promote a safe online environment for children. The Act requires the OSTWG to report its findings and... and Technology Working Group Meeting AGENCY: National Telecommunications and Information... public meeting of the Online Safety and Technology Working Group (OSTWG). DATES: The meeting will be held...

Design of agricultural product quality safety retrospective supervision system of Jiangsu province

NASA Astrophysics Data System (ADS)

Wang, Kun

2017-08-01

In store and supermarkets to consumers can trace back agricultural products through the electronic province card to query their origin, planting, processing, packaging, testing and other important information and found that the problems. Quality and safety issues can identify the responsibility of the problem. This paper designs a retroactive supervision system for the quality and safety of agricultural products in Jiangsu Province. Based on the analysis of agricultural production and business process, the goal of Jiangsu agricultural product quality safety traceability system construction is established, and the specific functional requirements and non-functioning requirements of the retroactive system are analyzed, and the target is specified for the specific construction of the retroactive system. The design of the quality and safety traceability system in Jiangsu province contains the design of the overall design, the trace code design and the system function module.

Association of nurse work environment and safety climate on patient mortality: A cross-sectional study.

PubMed

Olds, Danielle M; Aiken, Linda H; Cimiotti, Jeannie P; Lake, Eileen T

2017-09-01

There are two largely distinct research literatures on the association of the nurse work environment and the safety climate on patient outcomes. To determine whether hospital safety climate and work environment make comparable or distinct contributions to patient mortality. Cross-sectional secondary analysis of linked datasets of Registered Nurse survey responses, adult acute care discharge records, and hospital characteristics. Acute care hospitals in California, Florida, New Jersey, and Pennsylvania. The sample included 600 hospitals linked to 27,009 nurse survey respondents and 852,974 surgical patients. Nurse survey data included assessments of the nurse work environment and hospital safety climate. The outcome of interest was in-hospital mortality. Data analyses included descriptive statistics and multivariate random intercept logistic regression. In a fully adjusted model, a one standard deviation increase in work environment score was associated with an 8.1% decrease in the odds of mortality (OR 0.919, p<0.001). A one-standard deviation increase in safety climate score was similarly associated with a 7.7% decrease in the odds of mortality (OR 0.923, p<0.001). However, when work environment and safety climate were modeled together, the effect of the work environment remained significant, while safety climate became a non-significant predictor of mortality odds (OR 0.940, p=0.035 vs. OR 0.971, p=0.316). We found that safety climate perception is not predictive of patient mortality beyond the effect of the nurse work environment. To advance hospital safety and quality and improve patient outcomes, organizational interventions should be directed toward improving nurse work environments. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effects of extended work shifts on employee fatigue, health, satisfaction, work/family balance, and patient safety.

PubMed

Estryn-Béhar, Madeleine; Van der Heijden, Beatrice I J M

2012-01-01

12-hour shifts are quickly spreading in Europe. From our multivariate analysis concerning 25,924 European nurses, including twenty explanatory variables simultaneously, we found that work schedule itself is not a major determinant factor. Nurses aim to choose or accept night shifts or 12-hour shift in order to reduce their work/home conflicts, however, at the expense of the patient's safety, as well as their own health and safety. Therefore, it is important to develop measures, such as extended child care, association of nurses to the elaboration of their rota, 9- or 10-hour shifts in the afternoon, allowing naps during night shifts, and reduction of changing shifts with short notice. Work schedules must be organized in order to allow time for shift handover, social support and team building.

45 CFR 2543.84 - Contract Work Hours and Safety Standards Act.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 4 2010-10-01 2010-10-01 false Contract Work Hours and Safety Standards Act. 2543... laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work week is... pay for all hours worked in excess of 40 hours in the work week. Section 107 of the Act is applicable...

48 CFR 952.223-71 - Integration of environment, safety, and health into work planning and execution.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Provisions and Clauses 952.223-71 Integration of environment, safety, and health into work planning and..., safety, and health into work planning and execution. 952.223-71 Section 952.223-71 Federal Acquisition... safety and health standards applicable to the work conditions of contractor and subcontractor employees...

48 CFR 952.223-71 - Integration of environment, safety, and health into work planning and execution.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Provisions and Clauses 952.223-71 Integration of environment, safety, and health into work planning and..., safety, and health into work planning and execution. 952.223-71 Section 952.223-71 Federal Acquisition... safety and health standards applicable to the work conditions of contractor and subcontractor employees...

48 CFR 952.223-71 - Integration of environment, safety, and health into work planning and execution.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Provisions and Clauses 952.223-71 Integration of environment, safety, and health into work planning and..., safety, and health into work planning and execution. 952.223-71 Section 952.223-71 Federal Acquisition... safety and health standards applicable to the work conditions of contractor and subcontractor employees...

48 CFR 952.223-71 - Integration of environment, safety, and health into work planning and execution.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Provisions and Clauses 952.223-71 Integration of environment, safety, and health into work planning and..., safety, and health into work planning and execution. 952.223-71 Section 952.223-71 Federal Acquisition... safety and health standards applicable to the work conditions of contractor and subcontractor employees...

75 FR 76070 - Railroad Safety Advisory Committee (RSAC); Working Group Activity Update

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-07

.... 65] Railroad Safety Advisory Committee (RSAC); Working Group Activity Update AGENCY: Federal Railroad... Committee (RSAC) Working Group Activities. SUMMARY: The FRA is updating its announcement of RSAC's Working.... [[Page 76071

Quality and Safety Aspects of Cereals (Wheat) and Their Products.

PubMed

Varzakas, Theo

2016-11-17

Cereals and, most specifically, wheat are described in this chapter highlighting on their safety and quality aspects. Moreover, wheat quality aspects are adequately addressed since they are used to characterize dough properties and baking quality. Determination of dough properties is also mentioned and pasta quality is also described in this chapter. Chemometrics-multivariate analysis is one of the analyses carried out. Regarding production weighing/mixing of flours, kneading, extruded wheat flours, and sodium chloride are important processing steps/raw materials used in the manufacturing of pastry products. Staling of cereal-based products is also taken into account. Finally, safety aspects of cereal-based products are well documented with special emphasis on mycotoxins, acrylamide, and near infrared methodology.

Occupational safety beliefs among Latino residential roofing workers.

PubMed

Arcury, Thomas A; Summers, Phillip; Carrillo, Lourdes; Grzywacz, Joseph G; Quandt, Sara A; Mills, Thomas H

2014-06-01

This analysis describes beliefs about work safety and personal protective equipment (PPE) among Latino roofing workers, it delineates their perceptions of work environment characteristics that affect work safety and PPE use, and it describes how they experience work injuries and the consequences of these injuries. In-depth interviews were completed with 10 current and former Latino residential roofers. Interview transcripts were subjected to systematic qualitative analysis. Participants' valued productivity over safety, and this had a negative influence on their safety behavior and reduced their PPE use. They understood that roofing was hazardous. They limited use of PPE when they felt it reduced productivity and when it was uncomfortable. Work environment characteristics that affected safety included company size, the physical demands of the job, lack of training, the need for work, general life stress, and distractions at work. An injury had to result in lost work time to be considered significant. Access to health care is limited by employers not providing Workers' compensation. Future research is needed to substantiate these descriptive results and to delineate factors that are associated with safety behavior and use of PPE. Interventions, based on a lay health educator model, are needed to improve safety in this population. Safety regulations need to be evaluated and their enforcement needs to be improved. © 2013 Wiley Periodicals, Inc.

29 CFR 5.15 - Limitations, variations, tolerances, and exemptions under the Contract Work Hours and Safety...

Code of Federal Regulations, 2010 CFR

2010-07-01

... the Contract Work Hours and Safety Standards Act. 5.15 Section 5.15 Labor Office of the Secretary of... WORK HOURS AND SAFETY STANDARDS ACT) Davis-Bacon and Related Acts Provisions and Procedures § 5.15 Limitations, variations, tolerances, and exemptions under the Contract Work Hours and Safety Standards Act. (a...

The work environment and empowerment as predictors of patient safety culture in Turkey.

PubMed

Dirik, Hasan Fehmi; Intepeler, Seyda Seren

2017-05-01

As scant research based information is available regarding the work environment, empowerment and patient safety culture, this study from a developing country (Turkey) in which health care institutions are in a state of transition, aimed to investigate further the relationships between these three variables. A cross-sectional descriptive design was employed. The sample comprised 274 nurse participants working in a university hospital located in Izmir (Turkey). In data evaluation, descriptive statistics and hierarchical regression analyses were applied. The work environment and structural empowerment were related to the patient safety culture and explained 55% of the variance in patient safety culture perceptions. 'Support for optimal patient care', 'nurse/physician relationships' and 'staff involvement in organisational affairs' were the significant predictors. An enhancement of the work environment and providing access to empowerment structures may help health care organisations improve the patient safety culture. In light of the findings, the following actions can be recommended to inform health care leaders: providing necessary resources for nursing practise, encouraging nurses' participation in decision-making, strengthening communication within the team and giving nurses the opportunities to cope with challenging work problems to learn and grow. © 2017 John Wiley & Sons Ltd.

Employment and work safety among 12 to 14 year olds: listening to parents.

PubMed

Usher, Amelia M; Breslin, Curtis; MacEachen, Ellen; Koehoorn, Mieke; Laberge, Marie; Laberge, Luc; Ledoux, Élise; Wong, Imelda

2014-10-01

Survey research indicates that a surprising number of 12 to 14 year olds in North America engage in some form of paid work, and work-related injuries for this age group are reported at rates similar to older teens. Parents exhibit significant involvement in many aspects of their teens' work and may influence perceptions of work safety, yet few studies have explored this phenomenon from a qualitative perspective with parents of working 12 to 14 year olds. This paper focuses on parental perceptions and understandings of work safety based on focus groups conducted with urban Canadian parents of young teens who work for pay. Parents discussed the types of job held by their 12 to 14 year olds, the perceived costs and benefits to working at this age, and their understanding of risk and supervision on the job. A grounded theory approach was used to thematically analyze the focus group transcripts. Parents in this study held favourable attitudes towards their 12 to 14 year olds' working. Parents linked pro-social moral values and skills such as responsibility, work ethic, time management, and financial literacy with their young teen's employment experience. Risks and drawbacks were generally downplayed or discounted. Perceptions of workplace safety were mitigated by themes of trust, familiarity, sense of being in control and having discretion over their 12 to 14 year olds' work situation. Further, parental supervision and monitoring fell along a continuum, from full parental responsibility for monitoring to complete trust and delegation of supervision to the workplace. The findings suggest that positive parental attitudes towards working overshadow occupational health and safety concerns. Parents may discount potential hazards based on the presence of certain mitigating factors.

Defining the patient safety attitudes and influencing factors of health professionals working at maternity hospitals.

PubMed

Tunçer Ünver, Gamze; Harmanci Seren, Arzu Kader

2018-02-27

To determine patient safety attitudes of midwives, nurses and physicians and to examine the difference or correlation in patient safety attitudes of midwives, nurses and physicians working in maternity hospitals. It has been suggested that it is necessary to define the factors affecting patient safety attitudes of health professionals working in maternity hospitals. A descriptive and correlational design was employed.The sample comprised 58 midwives, 134 nurses and 63 physicians (255) in two maternity hospitals in Istanbul, Turkey. The data were collected using an 'information form' and a 'Patient Safety Attitude Questionnaire'. The safety attitudes of participants were generally found to be negative. However, midwives had more positive patient safety attitudes and the age, unit, adequacy of patient safety training and the importance of patient safety were the most effective variables. As health professionals working in maternity hospitals generally have negative patient safety attitudes and because patient safety training provided better attitudes among the participants, these training programmes should be developed and implemented considering the differences among age groups and units. Health professionals have different views on the patient safety culture; therefore, training needs to involve everyone to create a shared vision for patient safety. © 2018 John Wiley & Sons Ltd.

Nursing work environment, patient safety and quality of care in pediatric hospital.

PubMed

Alves, Daniela Fernanda Dos Santos; Guirardello, Edinêis de Brito

2016-06-01

Objectives To describe the characteristics of the nursing work environment, safety attitudes, quality of care, measured by the nursing staff of the pediatric units, as well as to analyze the evolution of quality of care and hospital indicators. Methods Descriptive study with 136 nursing professionals at a paediatric hospital, conducted through personal and professional characterization form, Nursing Work Index - Revised, Safety Attitudes Questionnaire - Short Form 2006 and quality indicators. Results The professionals perceive the environment as favourable to professional practice, and consider good quality care that is also observed by reducing the incidence of adverse events and decreased length of stay. The domain job satisfaction was considered favourable to patient safety. Conclusions The work environment is favourable to nursing practice, the professionals nursing approve the quality of care and the indicators tended reducing adverse events and length of stay.

Work organization research at the National Institute for Occupational Safety and Health.

PubMed

Rosenstock, L

1997-01-01

For 25 years, the National Institute for Occupational Safety and Health (NIOSH) has conducted and sponsored laboratory, field, and epidemiological studies that have helped define the role of work organization factors in occupational safety and health. Research has focused on the health effects of specific job conditions, occupational stressors in specific occupations, occupational difference in the incidence of stressors and stress-related disorders, and intervention strategies. NIOSH and the American Psychological Association have formalized the concept of occupational health psychology and developed a postdoctoral training program. The National Occupational Research Agenda recognizes organization of work as one of 21 national occupational safety and health research priority areas. Future research should focus on industries, occupations, and populations at special risk; the impact of work organization on overall health; the identification of healthy organization characteristics; and the development of intervention strategies.

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2010 CFR

2010-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2011 CFR

2011-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2012 CFR

2012-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2014 CFR

2014-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2013 CFR

2013-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

75 FR 51525 - Railroad Safety Advisory Committee (RSAC); Working Group Activity Update

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-20

.... 63] Railroad Safety Advisory Committee (RSAC); Working Group Activity Update AGENCY: Federal Railroad... Committee (RSAC) Working Group Activities. SUMMARY: The FRA is updating its announcement of RSAC's Working.... SUPPLEMENTARY INFORMATION: This notice serves to update FRA's last announcement of working group activities and...

Adjusting the Passing Scores for Gearing up for Safety: Production Agriculture Safety Training for Youth Curriculum Test Instruments

ERIC Educational Resources Information Center

Hoover, William Brian; French, Brian F.; Field, William E.; Tormoehlen, Roger L.

2012-01-01

Minimum passing scores for the Gearing Up for Safety: Production Agriculture Safety Training for Youth curriculum (Gearing Up for Safety) were set in 2006 with widely used and established procedures by efforts of subject matter experts (French, Breidenbach et al., 2007; French, Field, and Tormoehlen, 2006, 2007). While providing a research-based…

Evaluation of the work zone safety and mobility rule.

DOT National Transportation Integrated Search

2009-03-01

The Work Zone Safety and Mobile Rule (Rule) was published in the Federal Register in September 2004 indicating that all state and local governments receiving Federal-aid funding were required to comply with provisions of the Rule no later than Octobe...

Using resources for scientific-driven pharmacovigilance: from many product safety documents to one product safety master file.

PubMed

Furlan, Giovanni

2012-08-01

Current regulations require a description of the overall safety profile or the specific risks of a drug in multiple documents such as the Periodic and Development Safety Update Reports, Risk Management Plans (RMPs) and Signal Detection Reports. In a resource-constrained world, the need for preparing multiple documents reporting the same information results in shifting the focus from a thorough scientific and medical evaluation of the available data to maintaining compliance with regulatory timelines. Since the aim of drug safety is to understand and characterize product issues to take adequate risk minimization measures rather than to comply with bureaucratic requirements, there is the need to avoid redundancy. In order to identify core drug safety activities that need to be undertaken to protect patient safety and reduce the number of documents reporting the results of these activities, the author has reviewed the main topics included in the drug safety guidelines and templates. The topics and sources that need to be taken into account in the main regulatory documents have been found to greatly overlap and, in the future, as a result of the new Periodic Safety Update Report structure and requirements, in the author's opinion this overlap is likely to further increase. Many of the identified inter-document differences seemed to be substantially formal. The Development Safety Update Report, for example, requires separate presentation of the safety issues emerging from different sources followed by an overall evaluation of each safety issue. The RMP, instead, requires a detailed description of the safety issues without separate presentation of the evidence derived from each source. To some extent, however, the individual documents require an in-depth analysis of different aspects; the RMP, for example, requires an epidemiological description of the indication for which the drug is used and its risks. At the time of writing this article, this is not specifically

Work-family conflict and safety participation of high-speed railway drivers: Job satisfaction as a mediator.

PubMed

Wei, Wei; Guo, Ming; Ye, Long; Liao, Ganli; Yang, Zhehan

2016-10-01

Despite the large body of work on the work-family interface, hardly any literature has addressed the work-family interface in safety-critical settings. This study draws from social exchange theory to examine the effect of employees' strain-based work-to-family conflict on their supervisors' rating of their safety participation through job satisfaction. The sample consisted of 494 drivers from a major railway company in China. The results of a structural equation model revealed that drivers' strain-based work-to-family conflict negatively influences safety participation, and the relationship was partially mediated by job satisfaction. These findings highlight the importance of reducing employees' work-to-family conflict in safety-critical organizations. Copyright © 2016 Elsevier Ltd. All rights reserved.

Relationships between organizational and individual support, nurses' ethical competence, ethical safety, and work satisfaction.

PubMed

Poikkeus, Tarja; Suhonen, Riitta; Katajisto, Jouko; Leino-Kilpi, Helena

2018-03-12

Organizations and nurse leaders do not always effectively support nurses' ethical competence. More information is needed about nurses' perceptions of this support and relevant factors to improve it. The aim of the study was to examine relationships between nurses' perceived organizational and individual support, ethical competence, ethical safety, and work satisfaction. A cross-sectional questionnaire survey was conducted. Questionnaires were distributed to nurses (n = 298) working in specialized, primary, or private health care in Finland. Descriptive statistics, multifactor analysis of variance, and linear regression analysis were used to test the relationships. The nurses reported low organizational and individual support for their ethical competence, whereas perceptions of their ethical competence, ethical safety, and work satisfaction were moderate. There were statistically significant positive correlations between both perceived individual and organizational support, and ethical competence, nurses' work satisfaction, and nurses' ethical safety. Organizational and individual support for nurses' ethical competence should be strengthened, at least in Finland, by providing more ethics education and addressing ethical problems in multiprofessional discussions. Findings confirm that organizational level support for ethical competence improves nurses' work satisfaction. They also show that individual level support improves nurses' sense of ethical safety, and both organizational and individual support strengthen nurses' ethical competence. These findings should assist nurse leaders to implement effective support practices to strengthen nurses' ethical competence, ethical safety, and work satisfaction.

75 FR 4904 - Railroad Safety Advisory Committee (RSAC); Working Group Activity Update

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-29

...-7257] Railroad Safety Advisory Committee (RSAC); Working Group Activity Update AGENCY: Federal Railroad... Committee (RSAC) Working Group Activities. SUMMARY: The FRA is updating its announcement of RSAC's Working... notice serves to update FRA's last announcement of working group activities and status reports of August...

77 FR 24257 - Railroad Safety Advisory Committee (RSAC); Working Group Activity Update

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-23

.... 69] Railroad Safety Advisory Committee (RSAC); Working Group Activity Update AGENCY: Federal Railroad... Committee (RSAC) Working Group Activities. SUMMARY: The FRA is updating its announcement of the RSAC Working.... SUPPLEMENTARY INFORMATION: This notice serves to update FRA's last announcement of working group activities and...

Safety and efficacy of personal care products containing colloidal oatmeal.

PubMed

Criquet, Maryline; Roure, Romain; Dayan, Liliane; Nollent, Virginie; Bertin, Christiane

2012-01-01

Colloidal oatmeal is a natural ingredient used in the formulation of a range of personal care products for relief of skin dryness and itchiness. It is also used as an adjunctive product in atopic dermatitis. The safety of personal care products used on vulnerable skin is of particular importance and the risk of developing further skin irritations and/or allergies should be minimized. In a series of studies, we tested the safety of personal care products containing oatmeal (creams, cleansers, lotions) by assessing their irritant/allergenic potential on repeat insult patch testing, in safety-in-use and ocular studies using subjects with nonsensitive and sensitive skin. We also tested the skin moisturizing and repair properties of an oatmeal-containing skin care product for dry skin. We found that oatmeal-containing personal care products had very low irritant potential as well as a very low allergenic sensitization potential. Low-level reactions were documented in 1.0% of subjects during the induction phase of repeat insult patch testing; one of 2291 subjects developed a persistent but doubtful low-level reaction involving edema during the challenge phase in repeat insult patch testing. No allergies were reported by 80 subjects after patch testing after in-use application. Sustained skin moisturizing was documented in subjects with dry skin that lasted up to 2 weeks after product discontinuation. Our results demonstrate that colloidal oatmeal is a safe and effective ingredient in personal care products. No allergies were reported by consumers of 445,820 products sold during a 3-year period.

Safety and efficacy of personal care products containing colloidal oatmeal

PubMed Central

Criquet, Maryline; Roure, Romain; Dayan, Liliane; Nollent, Virginie; Bertin, Christiane

2012-01-01

Background Colloidal oatmeal is a natural ingredient used in the formulation of a range of personal care products for relief of skin dryness and itchiness. It is also used as an adjunctive product in atopic dermatitis. The safety of personal care products used on vulnerable skin is of particular importance and the risk of developing further skin irritations and/or allergies should be minimized. Methods In a series of studies, we tested the safety of personal care products containing oatmeal (creams, cleansers, lotions) by assessing their irritant/allergenic potential on repeat insult patch testing, in safety-in-use and ocular studies using subjects with nonsensitive and sensitive skin. We also tested the skin moisturizing and repair properties of an oatmeal-containing skin care product for dry skin. Results We found that oatmeal-containing personal care products had very low irritant potential as well as a very low allergenic sensitization potential. Low-level reactions were documented in 1.0% of subjects during the induction phase of repeat insult patch testing; one of 2291 subjects developed a persistent but doubtful low-level reaction involving edema during the challenge phase in repeat insult patch testing. No allergies were reported by 80 subjects after patch testing after in-use application. Sustained skin moisturizing was documented in subjects with dry skin that lasted up to 2 weeks after product discontinuation. Conclusion Our results demonstrate that colloidal oatmeal is a safe and effective ingredient in personal care products. No allergies were reported by consumers of 445,820 products sold during a 3-year period. PMID:23204849

Structural empowerment and patient safety culture among registered nurses working in adult critical care units.

PubMed

Armellino, Donna; Quinn Griffin, Mary T; Fitzpatrick, Joyce J

2010-10-01

The aim of the present study was to examine the relationship between structural empowerment and patient safety culture among staff level Registered Nurses (RNs) within adult critical care units (ACCU). There is literature to support the value of RNs' structurally empowered work environments and emerging literature towards patient safety culture; the link between empowerment and patient safety culture is being discovered. A sample of 257 RNs, working within adult critical care of a tertiary hospital in the United States, was surveyed. Instruments included a background data sheet, the Conditions of Workplace Effectiveness and the Hospital Survey on Patient Safety Culture. Structural empowerment and patient safety culture were significantly correlated. As structural empowerment increased so did the RNs' perception of patient safety culture. To foster patient safety culture, nurse leaders should consider providing structurally empowering work environments for RNs. This study contributes to the body of knowledge linking structural empowerment and patient safety culture. Results link structurally empowered RNs and increased patient safety culture, essential elements in delivering efficient, competent, quality care. They inform nursing management of key factors in the nurses' environment that promote safe patient care environments. © 2010 The Authors. Journal compilation © 2010 Blackwell Publishing Ltd.

30 CFR 7.10 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false MSHA acceptance of equivalent non-MSHA product... General § 7.10 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non...) [Reserved] (d) After MSHA has determined that non-MSHA product safety standards are equivalent and has...

30 CFR 7.10 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false MSHA acceptance of equivalent non-MSHA product... General § 7.10 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non...) [Reserved] (d) After MSHA has determined that non-MSHA product safety standards are equivalent and has...

30 CFR 7.10 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false MSHA acceptance of equivalent non-MSHA product... General § 7.10 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non...) [Reserved] (d) After MSHA has determined that non-MSHA product safety standards are equivalent and has...

30 CFR 7.10 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false MSHA acceptance of equivalent non-MSHA product... General § 7.10 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non...) [Reserved] (d) After MSHA has determined that non-MSHA product safety standards are equivalent and has...

30 CFR 7.10 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false MSHA acceptance of equivalent non-MSHA product... General § 7.10 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non...) [Reserved] (d) After MSHA has determined that non-MSHA product safety standards are equivalent and has...

Crossing the barrier between the laboratory working model and the practicable production model

NASA Astrophysics Data System (ADS)

Curby, William A.

1992-12-01

Transforming apparatus that has developed into a successfully working laboratory system into a system that is ready, or nearly ready for production, distribution and general use is not always accomplished in a cost effective or timely fashion. Several design elements must be considered interactively during the planning, construction, use and servicing of the final production form of the system. The basic design elements are: Operating Specifications, Reliability Factors, Safety Factors, Precision Limits, Accuracy Limits, Uniformity Factors, Cost Limits and Calibration Requirements. Secondary elements including: Human Engineering, Documentation, Training, Maintenance, Proprietary Rights, Protection, Marketing, Replacement of Parts, and Packing and Shipping must also be considered during the transition.

77 FR 10358 - Acceptance of ASTM F963-11 as a Mandatory Consumer Product Safety Standard

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-22

... Safety. Pursuant to section 106 of the Consumer Product Safety Improvement Act of 2008, ASTM F963-11 will... INFORMATION: On February 10, 2009, section 106(a) of the Consumer Product Safety Improvement Act of 2008... CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Chapter II Acceptance of ASTM F963-11 as a Mandatory...

Why do workers behave unsafely at work? Determinants of safe work practices in industrial workers.

PubMed

Garcia, A M; Boix, P; Canosa, C

2004-03-01

To explore the relation between safety climate (workers' perceptions regarding management's attitudes towards occupational safety and health) and workers' behaviour at work. Cross sectional survey of workers at the pottery industry in Castellon, Spain. Sampling was stratified by plant size and workers' gender, according to data on the working population at this setting. A total of 734 production workers were interviewed. Information was collected on safety climate and workers' behaviour towards occupational risks with a specific questionnaire. A safety climate index (SCI, scale 0-100) was constructed adding scores for each item measuring safety climate in the questionnaire. Workers' unsafe behaviour was analysed for the different safety climate index levels. Mean score for SCI was 71.90 (SD 19.19). There were no differences in SCI scores according to age, gender, education, children at charge, seniority at work, or type of employment. Small workplaces (<50 workers) showed significantly worse SCI (mean 67.23, SD 19.73) than the largest factories (>200 workers). Lower levels of SCI (SCI <50) were related to workers' unsafe behaviours (full/high accord with the statement "I excessively expose myself to hazards in my work", adjusted odds ratio ORa 2.79, 95% CI 1.60 to 4.88), and to lack of compliance with safety rules (ORa 12.83, 95% CI 5.92 to 27.80). Safety climate measures workers' perception of organisational factors related to occupational health and safety (for example, management commitment to risk prevention or priorities of safety versus production). In this study these factors are strongly associated with workers' attitudes towards safety at work. Longitudinal studies can further clarify the relation between safety climate and workers' behaviour regarding occupational safety and health.

Safety in the wood products industry

Treesearch

Judd H. Michael; Janice K. Wiedenbeck; Janice K. Wiedenbeck

2004-01-01

The wood products industry has historically been considered to be one of the most dangerous for manufacturing employees. Workers are exposed to hazards ranging from falling trees to debarkers to saws to nail guns, while often working under pressures for high productivity. Compounding the danger from these hazards are the mentally and physically challenging working...

Safety and risk assessment of ceramide 3 in cosmetic products.

PubMed

Choi, Seul Min; Lee, Byung-Mu

2015-10-01

Ceramide 3 is used mainly as a moisturizer in various cosmetic products. Although several safety studies on formulations containing pseudo-ceramide or ceramide have been conducted at the preclinical and clinical levels for regulatory approval, no studies have evaluated the systemic toxicity of ceramide 3. To address this issue, we conducted a risk assessment and comprehensive toxicological review of ceramide and pseudo-ceramide. We assumed that ceramide 3 is present in various personal and cosmetic products at concentrations of 0.5-10%. Based on previously reported exposure data, the margin of safety (MOS) was calculated for product type, use pattern, and ceramide 3 concentration. Lipsticks with up to 10% ceramide 3 (MOS = 4111) are considered safe, while shampoos containing 0.5% ceramide 3 (MOS = 148) are known to be safe. Reported MOS values for body lotion applied to the hands (1% ceramide 3) and back (5% ceramide 3) were 103 and 168, respectively. We anticipate that face cream would be safe up to a ceramide 3 concentration of 3% (MOS = 149). Collectively, the MOS approach indicated no safety concerns for cosmetic products containing less than 1% ceramide 3. Copyright © 2015 Elsevier Ltd. All rights reserved.

29 CFR 5.8 - Liquidated damages under the Contract Work Hours and Safety Standards Act.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 1 2011-07-01 2011-07-01 false Liquidated damages under the Contract Work Hours and Safety... APPLICABLE TO NONCONSTRUCTION CONTRACTS SUBJECT TO THE CONTRACT WORK HOURS AND SAFETY STANDARDS ACT) Davis-Bacon and Related Acts Provisions and Procedures § 5.8 Liquidated damages under the Contract Work Hours...

29 CFR 5.8 - Liquidated damages under the Contract Work Hours and Safety Standards Act.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 1 2010-07-01 2010-07-01 true Liquidated damages under the Contract Work Hours and Safety... APPLICABLE TO NONCONSTRUCTION CONTRACTS SUBJECT TO THE CONTRACT WORK HOURS AND SAFETY STANDARDS ACT) Davis-Bacon and Related Acts Provisions and Procedures § 5.8 Liquidated damages under the Contract Work Hours...

77 FR 24722 - Draft Guidance for Industry: Safety of Nanomaterials in Cosmetic Products; Availability

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-25

...] Draft Guidance for Industry: Safety of Nanomaterials in Cosmetic Products; Availability AGENCY: Food and... Cosmetic Products.'' The draft guidance, when finalized, will represent FDA's current thinking on the safety assessment of nanomaterials in cosmetic products. This guidance is intended to assist industry in...

78 FR 77597 - Safety Zone; Allied PRA-Solid Works, San Diego Bay; San Diego, CA

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-24

...-AA00 Safety Zone; Allied PRA-Solid Works, San Diego Bay; San Diego, CA AGENCY: Coast Guard, DHS. ACTION... the Allied PRA--Solid Works fireworks display, which will be conducted from a barge located southwest... Works; San Diego, CA. (a) Location. The limits of the safety zone will include all the navigable waters...

Implementation guide for monitoring work zone safety and mobility impacts

DOT National Transportation Integrated Search

2009-01-01

This implementation guide describes the conceptual framework, data requirements, and computational procedures for determining the safety and mobility impacts of work zones in Texas. Researchers designed the framework and procedures to assist district...

Intervention Effects on Safety Compliance and Citizenship Behaviors: Evidence from the Work, Family, and Health Study

PubMed Central

Hammer, Leslie B.; Johnson, Ryan C.; Crain, Tori L.; Bodner, Todd; Kossek, Ellen Ernst; Davis, Kelly; Kelly, Erin L.; Buxton, Orfeu M.; Karuntzos, Georgia; Chosewood, L. Casey; Berkman, Lisa

2015-01-01

We tested the effects of a work-family intervention on employee reports of safety compliance and organizational citizenship behaviors in 30 healthcare facilities using a group-randomized trial. Based on Conservation of Resources theory and the Work-Home Resources Model, we hypothesized that implementing a work-family intervention aimed at increasing contextual resources via supervisor support for work and family and employee control over work time would lead to improved personal resources and increased employee performance on the job in the form of self-reported safety compliance and organizational citizenship behaviors. Multilevel analyses used survey data from 1,524 employees at baseline, 6-month and 12-month post-intervention follow-ups. Significant intervention effects were observed for safety compliance at the 6-month and organizational citizenship behaviors at the 12-month follow-ups. More specifically, results demonstrate that the intervention protected against declines in employee self-reported safety compliance and organizational citizenship behaviors, compared to employees in the control facilities. The hypothesized mediators of perceptions of family supportive supervisor behaviors, control over work time, and work-family conflict (work-to-family conflict, family-to-work conflict) were not significantly improved by the intervention. However, baseline perceptions of family supportive supervisor behaviors, control over work time, and work-family climate were significant moderators of the intervention effect on the self-reported safety compliance and organizational citizenship behavior outcomes. PMID:26348479

48 CFR 970.5223-1 - Integration of environment, safety, and health into work planning and execution.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Integration of environment, safety, and health into work planning and execution. As prescribed in 970.2303-3(b), insert the following clause: Integration of Environment, Safety, and Health Into Work Planning and... danger to the environment or health and safety of employees or the public, the Contracting Officer may...

48 CFR 970.5223-1 - Integration of environment, safety, and health into work planning and execution.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Integration of environment, safety, and health into work planning and execution. As prescribed in 970.2303-3(b), insert the following clause: Integration of Environment, Safety, and Health Into Work Planning and... danger to the environment or health and safety of employees or the public, the Contracting Officer may...

48 CFR 970.5223-1 - Integration of environment, safety, and health into work planning and execution.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Integration of environment, safety, and health into work planning and execution. As prescribed in 970.2303-3(b), insert the following clause: Integration of Environment, Safety, and Health Into Work Planning and... danger to the environment or health and safety of employees or the public, the Contracting Officer may...

48 CFR 970.5223-1 - Integration of environment, safety, and health into work planning and execution.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Integration of environment, safety, and health into work planning and execution. As prescribed in 970.2303-3(b), insert the following clause: Integration of Environment, Safety, and Health Into Work Planning and... danger to the environment or health and safety of employees or the public, the Contracting Officer may...

Health and Safety at Work: Analysis from the Brazilian Documentary Film Flesh and Bone.

PubMed

Mendes, Luciano; Dos Santos, Heliani Berlato; Ichikawa, Elisa Yoshie

2017-12-01

The objective of this article is to make some analysis on the process of work and accidents occurring in slaughterhouses, evidenced in the Brazilian documentary film called Flesh and Bone . As such, it was necessary to discuss an alternative theoretical concept in relation to theories about health and safety at work. This alternative discussion focuses on the concepts of biopower and biopolitics. The use of audiovisual elements in research is not new, and there is already a branch of studies with methodological and epistemological variations. The Brazilian documentary Flesh and Bone was the basis for the research. The analysis of this documentary will be carried out from two complementary perspectives: "textual analysis" and "discourse analysis." Flesh and Bone presents problems related to health and safety at work in slaughterhouses because of the constant exposure of workers to knives, saws, and other sharp instruments in the workplace. The results show that in favor of higher production levels, increased overseas market sales, and stricter quality controls, some manufacturers resort to various practices that often result in serious injuries, disposal, and health damages to workers. Flesh and Bone , by itself, makes this explicit in the form of denunciation based on the situation of these workers. What it does not make clear is that, in the context of biopolitics, the actions aimed at solving these problems or even reducing the negative impacts for this group of workers, are not efficient enough to change such practices.

78 FR 57570 - Safety Zone; Motion Picture Production; Chicago, Illinois

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-19

...-AA00 Safety Zone; Motion Picture Production; Chicago, Illinois AGENCY: Coast Guard, DHS. ACTION: Notice... motion picture filming in Calumet Harbor, Chicago, IL from 9 p.m. until 6 a.m., from September 15 through September 29, 2013. This action is necessary and intended to ensure safety of life on navigable waters...

Innovative Forms Supporting Safe Methods of Work in Safety Engineering for the Development of Intelligent Specializations

NASA Astrophysics Data System (ADS)

Gembalska-Kwiecień, Anna

2016-12-01

The article discusses innovative forms of participation of employees in the work safety system. It also presents the advantages of these forms of employees' involvement. The aim of empirical studies was the analysis of their behavior and attitude towards health and safety at work. The issues considered in the article have a significant impact on the improvement of methods of prevention related to work safety and aided the creation of a healthy society.

The safety and regulation of natural products used as foods and food ingredients.

PubMed

Abdel-Rahman, Ali; Anyangwe, Njwen; Carlacci, Louis; Casper, Steve; Danam, Rebecca P; Enongene, Evaristus; Erives, Gladys; Fabricant, Daniel; Gudi, Ramadevi; Hilmas, Corey J; Hines, Fred; Howard, Paul; Levy, Dan; Lin, Ying; Moore, Robert J; Pfeiler, Erika; Thurmond, T Scott; Turujman, Saleh; Walker, Nigel J

2011-10-01

The use of botanicals and dietary supplements derived from natural substances as an adjunct to an improved quality of life or for their purported medical benefits has become increasingly common in the United States. This review addresses the safety assessment and regulation of food products containing these substances by the U.S. Food and Drug Administration (FDA). The issue of safety is particularly critical given how little information is available on the toxicity of some of these products. The first section uses case studies for stevia and green tea extracts as examples of how FDA evaluates the safety of botanical and herbal products submitted for consideration as Generally Recognized as Safe under the Federal Food, Drug, and Cosmetics Act. The 1994 Dietary Supplement Health Education Act (DSHEA) created a regulatory framework for dietary supplements. The article also discusses the regulation of this class of dietary supplements under DSHEA and addresses the FDA experience in analyzing the safety of natural ingredients described in pre-market safety submissions. Lastly, we discuss an ongoing interagency collaboration to conduct safety testing of nominated dietary supplements.

Countermeasures That Work : A Highway Safety Countermeasure Guide For State Highway Safety Offices Sixth Edition, 2011

DOT National Transportation Integrated Search

2011-02-01

This edition of Countermeasures that Work was prepared by the University of North Carolina Highway Safety Research Center (HSRC). Researchers who contributed to this edition include Arthur H. Goodwin, Libby J. Thomas, William L. Hall, and Mary Ellen ...

Non-reporting of work injuries and aspects of jobsite safety climate and behavioral-based safety elements among carpenters in Washington State.

PubMed

Lipscomb, Hester J; Schoenfisch, Ashley L; Cameron, Wilfrid

2015-04-01

Declining work injury rates may reflect safer work conditions as well as under-reporting. Union carpenters were invited to participate in a mailed, cross-sectional survey designed to capture information about injury reporting practices. Prevalence of non-reporting and fear of repercussions for reporting were compared across exposure to behavioral-based safety elements and three domains of the Nordic Safety Climate Questionnaire (NOSACQ-50). The majority (>75%) of the 1,155 participants felt they could report work-related injuries to their supervisor without fear of retribution, and most felt that the majority of injuries on their jobsites got reported. However, nearly half indicated it was best not to report minor injuries, and felt pressures to use their private insurance for work injury care. The prevalence of non-reporting and fear of reporting increased markedly with poorer measures of management safety justice (NOSACQ-50). Formal and informal policies and practices on jobsites likely influence injury reporting. © 2015 Wiley Periodicals, Inc.

76 FR 67201 - Information Collection Activities: Oil and Gas Production Safety Systems; Submitted for Office of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-31

.... BOEM-2011-0068; OMB Number 1014-0003] Information Collection Activities: Oil and Gas Production Safety... requirements in the regulations under Subpart H, ``Oil and Gas Production Safety Systems.'' This notice also... Gas Production Safety Systems. Abstract: The Outer Continental Shelf (OCS) Lands Act, as amended (43 U...

The associations between work-life balance behaviours, teamwork climate and safety climate: cross-sectional survey introducing the work-life climate scale, psychometric properties, benchmarking data and future directions.

PubMed

Sexton, J Bryan; Schwartz, Stephanie P; Chadwick, Whitney A; Rehder, Kyle J; Bae, Jonathan; Bokovoy, Joanna; Doram, Keith; Sotile, Wayne; Adair, Kathryn C; Profit, Jochen

2017-08-01

Improving the resiliency of healthcare workers is a national imperative, driven in part by healthcare workers having minimal exposure to the skills and culture to achieve work-life balance (WLB). Regardless of current policies, healthcare workers feel compelled to work more and take less time to recover from work. Satisfaction with WLB has been measured, as has work-life conflict, but how frequently healthcare workers engage in specific WLB behaviours is rarely assessed. Measurement of behaviours may have advantages over measurement of perceptions; behaviours more accurately reflect WLB and can be targeted by leaders for improvement. 1. To describe a novel survey scale for evaluating work-life climate based on specific behavioural frequencies in healthcare workers.2. To evaluate the scale's psychometric properties and provide benchmarking data from a large healthcare system.3. To investigate associations between work-life climate, teamwork climate and safety climate. Cross-sectional survey study of US healthcare workers within a large healthcare system. 7923 of 9199 eligible healthcare workers across 325 work settings within 16 hospitals completed the survey in 2009 (86% response rate). The overall work-life climate scale internal consistency was Cronbach α=0.790. t-Tests of top versus bottom quartile work settings revealed that positive work-life climate was associated with better teamwork climate, safety climate and increased participation in safety leadership WalkRounds with feedback (p<0.001). Univariate analysis of variance demonstrated differences that varied significantly in WLB between healthcare worker role, hospitals and work setting. The work-life climate scale exhibits strong psychometric properties, elicits results that vary widely by work setting, discriminates between positive and negative workplace norms, and aligns well with other culture constructs that have been found to correlate with clinical outcomes. Published by the BMJ Publishing Group

Intervention effects on safety compliance and citizenship behaviors: Evidence from the Work, Family, and Health Study.

PubMed

Hammer, Leslie B; Johnson, Ryan C; Crain, Tori L; Bodner, Todd; Kossek, Ellen Ernst; Davis, Kelly D; Kelly, Erin L; Buxton, Orfeu M; Karuntzos, Georgia; Chosewood, L Casey; Berkman, Lisa

2016-02-01

We tested the effects of a work-family intervention on employee reports of safety compliance and organizational citizenship behaviors in 30 health care facilities using a group-randomized trial. Based on conservation of resources theory and the work-home resources model, we hypothesized that implementing a work-family intervention aimed at increasing contextual resources via supervisor support for work and family, and employee control over work time, would lead to improved personal resources and increased employee performance on the job in the form of self-reported safety compliance and organizational citizenship behaviors. Multilevel analyses used survey data from 1,524 employees at baseline and at 6-month and 12-month postintervention follow-ups. Significant intervention effects were observed for safety compliance at the 6-month, and organizational citizenship behaviors at the 12-month, follow-ups. More specifically, results demonstrate that the intervention protected against declines in employee self-reported safety compliance and organizational citizenship behaviors compared with employees in the control facilities. The hypothesized mediators of perceptions of family-supportive supervisor behaviors, control over work time, and work-family conflict (work-to-family conflict, family-to-work conflict) were not significantly improved by the intervention. However, baseline perceptions of family-supportive supervisor behaviors, control over work time, and work-family climate were significant moderators of the intervention effect on the self-reported safety compliance and organizational citizenship behavior outcomes. (c) 2016 APA, all rights reserved).

[Application of Raman Spectroscopy Technique to Agricultural Products Quality and Safety Determination].

PubMed

Liu, Yan-de; Jin, Tan-tan

2015-09-01

The quality and safety of agricultural products and people health are inseparable. Using the conventional chemical methods which have so many defects, such as sample pretreatment, complicated operation process and destroying the samples. Raman spectroscopy as a powerful tool of analysing and testing molecular structure, can implement samples quickly without damage, qualitative and quantitative detection analysis. With the continuous improvement and the scope of the application of Raman spectroscopy technology gradually widen, Raman spectroscopy technique plays an important role in agricultural products quality and safety determination, and has wide application prospects. There have been a lot of related research reports based on Raman spectroscopy detection on agricultural product quality safety at present. For the understanding of the principle of detection and the current development situation of Raman spectroscopy, as well as tracking the latest research progress both at home and abroad, the basic principles and the development of Raman spectroscopy as well as the detection device were introduced briefly. The latest research progress of quality and safety determination in fruits and vegetables, livestock and grain by Raman spectroscopy technique were reviewed deeply. Its technical problems for agricultural products quality and safety determination were pointed out. In addition, the text also briefly introduces some information of Raman spectrometer and the application for patent of the portable Raman spectrometer, prospects the future research and application.

Production loss among employees perceiving work environment problems.

PubMed

Lohela-Karlsson, Malin; Hagberg, Jan; Bergström, Gunnar

2015-08-01

The overall aim of this explorative study was to investigate the relationship between factors in the psychosocial work environment and work environment-related production loss. Employees at a Swedish university were invited to answer a workplace questionnaire and were selected for this study if they reported having experienced work environment-related problems in the past 7 days (n = 302). A stepwise logistic regression and a modified Poisson regression were used to identify psychosocial work factors associated with work environment-related production loss as well as to identify at what level those factors are associated with production loss. Employees who reported having experienced work environment problems but also fair leadership, good social climate, role clarity and control of decision had significantly lower levels of production loss, whereas employees who reported inequality and high decision demands reported significantly higher levels of production loss. Never or seldom experiencing fair leadership, role clarity, equality, decision demands and good social climate increase the risk of production loss due to work environment problems, compared to those who experience these circumstances frequently, always or most of the time. Several psychosocial work factors are identified as factors associated with a reduced risk of production losses among employees despite the nature of the work environment problem. Knowledge of these factors may be important not only to reduce employee ill-health and the corresponding health-related production loss, but also reduce immediate production loss due to work environment-related problems.

Productivity loss at work; health-related and work-related factors.

PubMed

van den Heuvel, Swenne G; Geuskens, Goedele A; Hooftman, Wendela E; Koppes, Lando L J; van den Bossche, Seth N J

2010-09-01

Productivity loss is an increasing problem in an aging working population that is decreasing in numbers. The aim of this study is to identify work-related and health-related characteristics associated with productivity loss, due to either sickness absence or reduced performance at work. In this cross-sectional study, data of the Netherlands Working Conditions Survey of 2007 were used, which includes a national representative sample of 22,759 employees aged 15 to 64 years. Demographic characteristics, health-related and work-related factors were assessed with a questionnaire. Logistic regression analyses were carried out to study the relationship of work-related and health-related factors with low performance at work and sickness absence in the past 12 months. Poor general health, the number of longstanding health conditions, and most types of longstanding health conditions were associated with productivity loss. Health-related factors were in general stronger associated with sickness absence than with low performance at work. Performance: poor health OR 1.54 CI 1.38-1.71, >1 health conditions OR 1.21 CI 1.09-1.35; sickness absence: poor health OR 2.62 CI 2.33-2.93, >1 health conditions OR 2.47 CI 2.21-2.75. Of the different types of longstanding health conditions, only psychological complaints and to a small extent musculoskeletal symptoms, were associated with low performance (respectively OR 1.54 CI 1.27-1.87; OR 1.09 CI 1.00-1.18). Low performance at work was less likely among employees with high physically demanding work (shift work OR 0.70 CI 0.63-0.76, using force OR 0.78 CI 0.72-0.84, and repetitive movements OR 0.74 CI 0.70-0.79). Psychosocial factors were stronger associated with low performance at work than with sickness absence (performance: job autonomy OR 1.28 CI 1.21-1.37, job demands OR 1.23 CI 1.16-1.31, emotionally demanding work OR 1.73 CI 1.62-1.85; sickness absence: job autonomy ns, job demands OR 1.09 CI 1.03-1.17, emotionally demanding work OR

The impact of precancerous cervical lesions on functioning at work and work productivity.

PubMed

Lerner, Debra; Parsons, Susan K; Justicia-Linde, Faye; Chelmow, David; Chang, Hong; Rogers, William H; Greenhill, Annabel M; Perch, Katherine; Kruzikas, Denise

2010-09-01

To assess the work performance and productivity impact of human papillomavirus (HPV). A cross-sectional study compared 94 employed women with clinically significant HPV-related cervical lesions with 118 healthy controls. Data were collected by self-administered web-based questionnaire. At-work performance limitations and productivity loss (presenteeism) and absenteeism were measured. Univariate and multivariate case-control group and clinical subgroup differences were tested. Based on adjusted mean scores, the HPV group had significantly more at-work limitations and productivity loss than controls (P = 0.009), higher absence rates (P = 0.002), and significantly more productivity loss because of absences (P = 0.007). At-work limitations varied in association with martial status (P = 0.025); at-work productivity loss was associated with years of education (P = 0.039). HPV is costly for working women, their employers, and the economy.

[Рroblems of ensuring the safety of deep-fried fast food products].

PubMed

Simakova, I V; Perkel, R L; Kutkina, M N; Volovey, A G

There are no doubts that fast-food restaurants, where deep-frying is actively used, are now very popular in Russia. This article focuses on the problems of deep-fried food safety. During deep-frying a considerable amount of fat penetrates the food. That is why the safety of deep-fried food depends on the fat safety and quality, on the level of fat absorption, and on the intensity of oxidative changes of fat during storage. This article contains the results of the research, which demonstrate that in order to insure the safety of fast-food products it is necessary to introduce into normative and technical documents the following standards: peroxide value, acid value, content of oxidation products insoluble in petroleum ether, and content of epoxides in fat phase and to food mass. According to the current norms on content of oxidation products in deep-frying fat and allowed level of fat absorption by a food product equal to 20%, the recommended level of oxidation products insoluble in petroleum ether for French fries is not higher than 0.2% to the food mass. As a temporary measure we can recommend the level of epoxides not higher than 5 mmol/kg to the food mass. It is important to control the content of trans-isomers in deepfrying fat, it must be not higher than 2% of fatty acid mass. In order to lower fat absorption during French fries production it is recommended to use halffinished products of high readiness, and to air fry.

Layoffs and tradeoffs: production, quality, and safety demands under the threat of job loss.

PubMed

Probst, Tahira M

2002-07-01

Employees often face a conflict between production targets, quality assurance, and adherence to safety policies. In a time when layoffs are on the rise, it is important to understand the effects of employee job insecurity on these potentially competing demands. A laboratory experiment manipulated the threat of layoffs in a simulated organization and assessed its effect on employee productivity, product quality, and adherence to safety policies. Results suggest that student participants faced with the threat of layoffs were more productive, yet violated more safety rules and produced lower quality outputs, than participants in the control condition. Implications for organizations contemplating layoffs and directions for future research are discussed.

Safety and the Supervisor. A Safe System of Work. Members' Occasional Papers.

ERIC Educational Resources Information Center

Corfield, Tony

In 1981 four supervisors at a chemical company in Great Britain were each fined 100 pounds under the country's 1974 Health and Safety at Work Act after a fifth supervisor was injured because of a faulty interlock guard. The supervisors were convicted because they had all known about but had done nothing to rectify the potential safety hazard. The…

FMEA and consideration of real work situations for safer design of production systems.

PubMed

Lux, Aurélien; Mawo De Bikond, Johann; Etienne, Alain; Quillerou-Grivot, Edwige

2016-12-01

Production equipment designers must ensure the health and safety of future users; in this regard, they augment requirements for standardizing and controlling operator work. This contrasts with the ergonomic view of the activity, which recommends leaving operators leeway (margins for manoeuvre) in performing their task, while safeguarding their health. Following a brief analysis of design practices in the car industry, we detail how the Failure Modes and Effects Analysis (FMEA) approach is implemented in this sector. We then suggest an adaptation that enables designers to consider real work situations. This new protocol, namely, work situation FMEA, allows experience feedback to be used to defend the health standpoint during designer project reviews, which usually only address quality and performance issues. We subsequently illustrate the advantage of this approach using two examples of work situations at car parts manufacturers: the first from the literature and the second from an in-company industrial project.

Work environment and safety climate in the Swedish merchant fleet.

PubMed

Forsell, Karl; Eriksson, Helena; Järvholm, Bengt; Lundh, Monica; Andersson, Eva; Nilsson, Ralph

2017-02-01

To get knowledge of the work environment for seafarers sailing under the Swedish flag, in terms of safety climate, ergonomical, chemical and psychosocial exposures, and the seafarers self-rated health and work ability. A Web-based questionnaire was sent to all seafarers with a personal e-mail address in the Swedish Maritime Registry (N = 5608). Comparisons were made mainly within the study population, using Student's t test, prevalence odds ratios and logistic regressions with 95% confidence intervals. The response rate was 35% (N = 1972; 10% women, 90% men), with 61% of the respondents working on deck, 31% in the engine room and 7% in the catering/service department (1% not classifiable). Strain on neck, arm or back and heavy lifting were associated with female gender (p = 0.0001) and younger age (below or above 30 years of age, p < 0.0001). Exposures to exhausts, oils and dust were commonly reported. Major work problems were noise, risk of an accident and vibrations from the hull of the ship. The safety climate was high in comparison with that in land-based occupations. One-fourth had experienced personal harassment or bullying during last year of service. Noise, risk of accidents, hand/arm and whole-body vibrations and psychosocial factors such as harassment were commonly reported work environment problems among seafarers within the Swedish merchant fleet.

Shelf life and safety concerns of bakery products--a review.

PubMed

Smith, James P; Daifas, Daphne Phillips; El-Khoury, Wassim; Koukoutsis, John; El-Khoury, Anis

2004-01-01

Bakery products are an important part of a balanced diet and, today, a wide variety of such products can be found on supermarket shelves. This includes unsweetened goods (bread, rolls, buns, crumpets, muffins and bagels), sweet goods (pancakes, doughnuts, waffles and cookies) and filled goods (fruit and meat pies, sausage rolls, pastries, sandwiches, cream cakes, pizza and quiche). However, bakery products, like many processed foods, are subject to physical, chemical and microbiological spoilage. While physical and chemical spoilage limits the shelf life of low and intermediate moisture bakery products, microbiological spoilage by bacteria, yeast and molds is the concern in high moisture products i.e., products with a water activity (a(w)) > 0.85. Furthermore, several bakery products also have been implicated infoodborne illnesses involving Salmonella spp., Listeria monoctyogenes and Bacillus cereus, while Clostridium botulinum is a concern in high moisture bakery products packaged under modified atmospheres. This extensive review is divided into two parts. Part I focuses on the spoilage concerns of low, intermediate and high moisture bakery products while Part II focuses on the safety concerns of high moisture bakery products only. In both parts, traditional and novel methods of food preservation that can be used by the bakery industry to extend the shelf life and enhance the safety of products are discussed in detail.

Making work safer: testing a model of social exchange and safety management.

PubMed

DeJoy, David M; Della, Lindsay J; Vandenberg, Robert J; Wilson, Mark G

2010-04-01

This study tests a conceptual model that focuses on social exchange in the context of safety management. The model hypothesizes that supportive safety policies and programs should impact both safety climate and organizational commitment. Further, perceived organizational support is predicted to partially mediate both of these relationships. Study outcomes included traditional outcomes for both organizational commitment (e.g., withdrawal behaviors) as well as safety climate (e.g., self-reported work accidents). Questionnaire responses were obtained from 1,723 employees of a large national retailer. Using structural equation modeling (SEM) techniques, all of the model's hypothesized relationships were statistically significant and in the expected directions. The results are discussed in terms of social exchange in organizations and research on safety climate. Maximizing safety is a social-technical enterprise. Expectations related to social exchange and reciprocity figure prominently in creating a positive climate for safety within the organization. Copyright 2010 Elsevier Ltd. All rights reserved.

History of plasma-product safety.

PubMed

Hoots, W K

2001-04-01

The evolution of transfusion or infusion therapies for diseases requiring specific protein replacements (e.g., hemophilia A and B and severe combined immunodeficiency syndrome) was dramatic over the second half of the 20th century. Unfortunately, it was accompanied by extreme manifestations of transfusion-transmitted diseases, such as human immunodeficiency virus (HIV), hepatitis B, and hepatitis C. The milestones of both the replacement therapies and the associated diseases are discussed in this presentation, which focuses on the technologic advances that resulted in even more "pure" replacement therapies for plasma-protein diseases. From donor screening to the development of viral attenuation techniques, every facet of production for these products was impacted by the exigent push for viral safety created by HIV and hepatitis. Almost invariably, this negatively affects total product yield. At the beginning of the 21st century, success in making plasma products safe from recognized and potential pathogens has dramatically increased societal pressures to produce a zero-risk, plasma-derived protein therapy. However, past improvements and low theoretic risks for future pathogen contamination have increased product cost. This is associated with a possible decrease in the overall supply of these plasma proteins because of the reduced numbers of acceptable donors and the loss of protein from expanded attenuation technology. These impacts and the role of dynamic societal and scientific pressures on these decision processes are discussed. Copyright 2001 by W.B. Saunders Company.

Impact of dry eye on work productivity.

PubMed

Yamada, Masakazu; Mizuno, Yoshinobu; Shigeyasu, Chika

2012-01-01

The purpose of this study was to evaluate the impact of dry eye on work productivity of office workers, especially in terms of presenteeism. A total of 396 individuals aged ≥20 years (258 men and 138 women, mean age 43.4 ± 13.0 years) were recruited through an online survey. Data from 355 responders who did not have missing values were included in the analysis. They were classified into the following four groups according to the diagnostic status and subjective symptoms of dry eye: a definite dry eye group; a marginal dry eye group; a self-reported dry eye group; and a control group. The impact of dry eye on work productivity was evaluated using the Japanese version of the Work Limitations Questionnaire. The cost of work productivity loss associated with dry eye and the economic benefits of providing treatment for dry eye were also assessed. The degree of work performance loss was 5.65% in the definite dry eye group, 4.37% in the marginal dry eye group, 6.06% in the self-reported dry eye group, and 4.27% in the control group. Productivity in the self-reported dry eye group was significantly lower than that in the control group (P < 0.05). The annual cost of work productivity loss associated with dry eye was estimated to be USD 741 per person. Dry eye impairs work performance among office workers, which may lead to a substantial loss to industry. Management of symptoms of dry eye by providing treatment may contribute to improvement in work productivity.

The impact of nursing work environments on patient safety outcomes: the mediating role of burnout/engagement.

PubMed

Spence Laschinger, Heather K; Leiter, Michael P

2006-05-01

To test a theoretical model of professional nurse work environments linking conditions for professional nursing practice to burnout and, subsequently, patient safety outcomes. The 2004 Institute of Medicine report raised serious concerns about the impact of hospital restructuring on nursing work environments and patient safety outcomes. Few studies have used a theoretical framework to study the nature of the relationships between nursing work environments and patient safety outcomes. Hospital-based nurses in Canada (N = 8,597) completed measures of worklife (Practice Environment Scale of the Nursing Work Index), burnout (Maslach Burnout Inventory-Human Service Scale), and their report of frequency of adverse patient events. Structural equation modeling analysis supported an extension of Leiter and Laschinger's Nursing Worklife Model. Nursing leadership played a fundamental role in the quality of worklife regarding policy involvement, staffing levels, support for a nursing model of care (vs medical), and nurse/physician relationships. Staffing adequacy directly affected emotional exhaustion, and use of a nursing model of care had a direct effect on nurses' personal accomplishment. Both directly affected patient safety outcomes. The results suggest that patient safety outcomes are related to the quality of the nursing practice work environment and nursing leadership's role in changing the work environment to decrease nurse burnout.

Hospital Nurses' Work Environment Characteristics and Patient Safety Outcomes: A Literature Review.

PubMed

Lee, Seung Eun; Scott, Linda D

2018-01-01

This integrative literature review assesses the relationship between hospital nurses' work environment characteristics and patient safety outcomes and recommends directions for future research based on examination of the literature. Using an electronic search of five databases, 18 studies published in English between 1999 and 2016 were identified for review. All but one study used a cross-sectional design, and only four used a conceptual/theoretical framework to guide the research. No definition of work environment was provided in most studies. Differing variables and instruments were used to measure patient outcomes, and findings regarding the effects of work environment on patient outcomes were inconsistent. To clarify the relationship between nurses' work environment characteristics and patient safety outcomes, researchers should consider using a longitudinal study design, using a theoretical foundation, and providing clear operational definitions of concepts. Moreover, given the inconsistent findings of previous studies, they should choose their measurement methodologies with care.

Effects of health care provider work hours and sleep deprivation on safety and performance.

PubMed

Lockley, Steven W; Barger, Laura K; Ayas, Najib T; Rothschild, Jeffrey M; Czeisler, Charles A; Landrigan, Christopher P

2007-11-01

There has been increasing interest in the impact of resident-physician and nurse work hours on patient safety. The evidence demonstrates that work schedules have a profound effect on providers' sleep and performance, as well as on their safety and that of their patients. Nurses working shifts greater than 12.5 hours are at significantly increased risk of experiencing decreased vigilance on the job, suffering an occupational injury, or making a medical error. Physicians-in-training working traditional > 24-hour on-call shifts are at greatly increased risk of experiencing an occupational sharps injury or a motor vehicle crash on the drive home from work and of making a serious or even fatal medical error. As compared to when working 16-hours shifts, on-call residents have twice as many attentional failures when working overnight and commit 36% more serious medical errors. They also report making 300% more fatigue-related medical errors that lead to a patient's death. The weight of evidence strongly suggests that extended-duration work shifts significantly increase fatigue and impair performance and safety. From the standpoint of both providers and patients, the hours routinely worked by health care providers in the United States are unsafe. To reduce the unacceptably high rate of preventable fatigue-related medical error and injuries among health care workers, the United States must establish and enforce safe work-hour limits.

Working in Australia's heat: health promotion concerns for health and productivity.

PubMed

Singh, Sudhvir; Hanna, Elizabeth G; Kjellstrom, Tord

2015-06-01

of productivity in many jobs. In light of projected continued global warming, and associated increase in heat waves, more attention needs to be given to environmental heat as a human health hazard in the Occupational Health and Safety arena. Without adoption of effective heat protective strategies economic output and fitness levels will diminish. Health protection and promotion activities should include strategies to reduce heat exposure, limit exposure duration, ensure access to hydration, and promote acclimatization and fitness programmes, and reorientate attitudes towards working in the heat. © The Author (2013). Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Application of visualization and simulation program to improve work zone safety and mobility.

DOT National Transportation Integrated Search

2010-01-01

A previous study sponsored by the Smart Work Zone Deployment Initiative, Feasibility of Visualization and Simulation Applications to Improve Work Zone Safety and Mobility, demonstrated the feasibility of combining readily available, inexpensive...

Application of visualization and simulation program to improve work zone safety and mobility.

DOT National Transportation Integrated Search

2010-01-01

"A previous study sponsored by the Smart Work Zone Deployment Initiative, Feasibility of Visualization and Simulation Applications to Improve Work Zone Safety and Mobility, demonstrated the feasibility of combining readily available, inexpensiv...

Predictors of Hospital Nurses' Safety Practices: Work Environment, Workload, Job Satisfaction, and Error Reporting.

PubMed

Chiang, Hui-Ying; Hsiao, Ya-Chu; Lee, Huan-Fang

Nurses' safety practices of medication administration, prevention of falls and unplanned extubations, and handover are essentials to patient safety. This study explored the prediction between such safety practices and work environment factors, workload, job satisfaction, and error-reporting culture of 1429 Taiwanese nurses. Nurses' job satisfaction, error-reporting culture, and one environmental factor of nursing quality were found to be major predictors of safety practices. The other environment factors related to professional development and participation in hospital affairs and nurses' workload had limited predictive effects on the safety practices. Increasing nurses' attention to patient safety by improving these predictors is recommended.

Ares I-X Range Safety Analyses Overview

NASA Technical Reports Server (NTRS)

Starr, Brett R.; Gowan, John W., Jr.; Thompson, Brian G.; Tarpley, Ashley W.

2011-01-01

Ares I-X was the first test flight of NASA's Constellation Program's Ares I Crew Launch Vehicle designed to provide manned access to low Earth orbit. As a one-time test flight, the Air Force's 45th Space Wing required a series of Range Safety analysis data products to be developed for the specified launch date and mission trajectory prior to granting flight approval on the Eastern Range. The range safety data package is required to ensure that the public, launch area, and launch complex personnel and resources are provided with an acceptable level of safety and that all aspects of prelaunch and launch operations adhere to applicable public laws. The analysis data products, defined in the Air Force Space Command Manual 91-710, Volume 2, consisted of a nominal trajectory, three sigma trajectory envelopes, stage impact footprints, acoustic intensity contours, trajectory turn angles resulting from potential vehicle malfunctions (including flight software failures), characterization of potential debris, and debris impact footprints. These data products were developed under the auspices of the Constellation's Program Launch Constellation Range Safety Panel and its Range Safety Trajectory Working Group with the intent of beginning the framework for the operational vehicle data products and providing programmatic review and oversight. A multi-center NASA team in conjunction with the 45th Space Wing, collaborated within the Trajectory Working Group forum to define the data product development processes, performed the analyses necessary to generate the data products, and performed independent verification and validation of the data products. This paper outlines the Range Safety data requirements and provides an overview of the processes established to develop both the data products and the individual analyses used to develop the data products, and it summarizes the results of the analyses required for the Ares I-X launch.

Psychosocial safety climate, emotional exhaustion, and work injuries in healthcare workplaces.

PubMed

Zadow, Amy Jane; Dollard, Maureen Frances; Mclinton, Sarven Savia; Lawrence, Peter; Tuckey, Michelle Rae

2017-12-01

Preventing work injuries requires a clear understanding of how they occur, how they are recorded, and the accuracy of injury surveillance. Our innovation was to examine how psychosocial safety climate (PSC) influences the development of reported and unreported physical and psychological workplace injuries beyond (physical) safety climate, via the erosion of psychological health (emotional exhaustion). Self-report data (T2, 2013) from 214 hospital employees (18 teams) were linked at the team level to the hospital workplace injury register (T1, 2012; T2, 2013; and T3, 2014). Concordance between survey-reported and registered injury rates was low (36%), indicating that many injuries go unreported. Safety climate was the strongest predictor of T2 registered injury rates (controlling for T1); PSC and emotional exhaustion also played a role. Emotional exhaustion was the strongest predictor of survey-reported total injuries and underreporting. Multilevel analysis showed that low PSC, emanating from senior managers and transmitted through teams, was the origin of psychological health erosion (i.e., low emotional exhaustion), which culminated in greater self-reported work injuries and injury underreporting (both physical and psychological). These results underscore the need to consider, in theory and practice, a dual physical-psychosocial safety explanation of injury events and a psychosocial explanation of injury underreporting. Copyright © 2017 John Wiley & Sons, Ltd.

The occupational safety of health professionals working at community and family health centers.

PubMed

Ozturk, Havva; Babacan, Elif

2014-10-01

Healthcare professionals encounter many medical risks while providing healthcare services to individuals and the community. Thus, occupational safety studies are very important in health care organizations. They involve studies performed to establish legal, technical, and medical measures that must be taken to prevent employees from sustaining physical or mental damage because of work hazards. This study was conducted to determine if the occupational safety of health personnel at community and family health centers (CHC and FHC) has been achieved. The population of this cross-sectional study comprised 507 nurses, 199 physicians, and 237 other medical personnel working at a total of 18 family health centers (FHC) and community health centers (CHC) in Trabzon, Turkey. The sample consisted of a total of 418 nurses, 156 physicians, and 123 other medical personnel. Sampling method was not used, and the researchers tried to reach the whole population. Data were gathered with the Occupational Safety Scale (OSS) and a questionnaire regarding demographic characteristics and occupational safety. According to the evaluations of all the medical personnel, the mean ± SD of total score of the OSS was 3.57 ± 0.98; of the OSS's subscales, the mean ± SD of the health screening and registry systems was 2.76 ± 1.44, of occupational diseases and problems was 3.04 ± 1.3 and critical fields control was 3.12 ± 1.62. In addition, occupational safety was found more insufficient by nurses (F = 14.18; P < 0.001). All healthcare personnel, particularly nurses working in CHCs and FHCs found occupational safety to be insufficient as related to protective and supportive activities.

Advancement of Tools Supporting Improvement of Work Safety in Selected Industrial Company

NASA Astrophysics Data System (ADS)

Gembalska-Kwiecień, Anna

2018-03-01

In the presented article, the advancement of tools to improve the safety of work in the researched industrial company was taken into consideration. Attention was paid to the skillful analysis of the working environment, which includes the available technologies, work organization and human capital. These factors determine the development of the best prevention activities to minimize the number of accidents.

Safety of High Speed Guided Ground Transportation Systems: Work Breakdown Structure

DOT National Transportation Integrated Search

1994-11-30

This report provides a systems approach to the assessment, evaluation and application of high-speed guided ground transportation (HSGGT) safety criteria and : presents one potential methodology by combining a work breakdown structure (WBS) : approach...

Construction of Traceability System for Quality Safety of Cereal and Oil Products

NASA Astrophysics Data System (ADS)

Zheng, Huoguo; Liu, Shihong; Meng, Hong; Hu, Haiyan

After several significant food safety incident, global food industry and governments in many countries are putting increasing emphasis on establishment of food traceability systems. Food traceability has become an effective way in food quality and safety management. The traceability system for quality safety of cereal and oil products was designed and implemented with HACCP and FMECA method, encoding, information processing, and hardware R&D technology etc, according to the whole supply chain of cereal and oil products. Results indicated that the system provide not only the management in origin, processing, circulating and consuming for enterprise, but also tracing service for customers and supervisor by means of telephone, internet, SMS, touch machine and mobile terminal.

[Managment system in safety and health at work organization. An Italian example in public sector: Inps].

PubMed

Di Loreto, G; Felicioli, G

2010-01-01

The Istituto Nazionale della Previdenza Sociale (Inps) is one of the biggest Public Sector organizations in Italy; about 30.000 people work in his structures. Fifteen years ago, Inps launched a long term project with the objective to create a complex and efficient safety and health at work organization. Italian law contemplates a specific kind of physician working on safety and health at work, called "Medico competente", and 85 Inps's physicians work also as "Medico competente". This work describes how IT improved coordination and efficiency in this occupational health's management system.

Developing a smartphone based warning system application to enhance the safety at work zones : final report.

DOT National Transportation Integrated Search

2016-05-01

Collisions in the work zone have always been a contributing factor to compromising safety on urban roadways. The National Highway Traffic Safety Administration (NHTSA) and the State Transportation Authorities have implemented many safety countermeasu...

NACA Wartime Safety Poster

NASA Image and Video Library

1945-04-21

One of many safety posters produced by NACA artists during World War II. The Aircraft Engine Research Laboratory established a Safety Office in 1942 to coordinate and oversee safety-related activities. The lab struggled to maintain a full staff during the war when military research projects were at a peak. NACA management mandated six-day work weeks without overtime and the elimination of holidays. As such, workplace injuries were a serious threat to maintaining productivity needed to sustain the military’s aeronautics efforts.

A Collection Scheme for Tracing Information of Pig Safety Production

NASA Astrophysics Data System (ADS)

Luo, Qingyao; Xiong, Benhai; Yang, Liang

This study takes one main production pattern of smallhold pig farming in Tianjin as a study prototype, deeply analyzes characters of informations about tracing inputs including vaccines,feeds,veterinary drugs and supervision test in pig farming, proposesinputs metadata, criteria for integrating inputs event and interface norms for data transmision, developes and completes identification of 2D ear tags and traceability information collection system of pig safety production based on mobile PDA. The system has implemented functions including setting and invalidate of 2D ear tags, collection of tracing inputs and supervision in the mobile PDA and finally integration of tracing events (the epidemic event,feed event,drug event and supervision event) on the traceability data center (server). The PDA information collection system has been applied for demonstration in Tianjin, the collection is simple, convenient and feasible. It could meet with requirements of traceability information system of pig safety production

Relationship between perceived work ability and productivity loss.

PubMed

Vänni, Kimmo; Virtanen, Pekka; Luukkaala, Tiina; Nygård, Clas-Håkan

2012-01-01

This paper presents an approach to assessing presenteeism (on-the-job productivity loss) that is related to perceived work ability. The aim of this explorative research was to find out if perceived work ability could be a robust indicator, interchangeable with presenteeism, in Finnish food industry organizations. The developed approach was based on existing presenteeism research as well as on register and survey data. The approach demonstrates that one step downward on the 10-point perceived work ability scale theoretically reduces employees' on-the-job productivity by ˜5 percentage points. At the company level, on-the-job productivity loss was 3.7% (mdn 0), while sickness absence was 5.0% (mdn 2.2). The probability of productivity loss among factory workers was fourfold compared to women in office work. The developed approach makes it possible to assess perceived productivity loss at the level of an individual and an organization. Perceived work ability may, in fact, be a robust indicator for assessing perceived productivity loss.

Health care work environments, employee satisfaction, and patient safety: Care provider perspectives.

PubMed

Rathert, Cheryl; May, Douglas R

2007-01-01

Experts continue to decry the lack of progress made in decreasing the alarming frequency of medical errors in health care organizations (Leape, L. L., & Berwick, D. M. (2005). Five years after to err is human: What have we learned?. Journal of the American Medical Association, 293(19), 2384-2390). At the same time, other experts are concerned about the lack of job satisfaction and turnover among nurses (. Keeping patients safe: Transforming the work environment of nurses. Washington, DC: National Academy Press). Research and theory suggest that a work environment that facilitates patient-centered care should increase patient safety and nurse satisfaction. The present study began with a conceptual model that specifies how work environment variables should be related to both nurse and patient outcomes. Specifically, we proposed that health care work units with climates for patient-centered care should have nurses who are more satisfied with their jobs. Such units should also have higher levels of patient safety, with fewer medication errors. We examined perceptions of nurses from three acute care hospitals in the eastern United States. Nurses who perceived their work units as more patient centered were significantly more satisfied with their jobs than were those whose units were perceived as less patient centered. Those whose work units were more patient centered reported that medication errors occurred less frequently in their units and said that they felt more comfortable reporting errors and near-misses than those in less patient-centered units. Patients and quality leaders continue to call for delivery of patient-centered care. If climates that facilitate such care are also related to improved patient safety and nurse satisfaction, proactive, patient-centered management of the work environment could result in improved patient, employee, and organizational outcomes.

Executing effective road safety advertising: are big production budgets necessary?

PubMed

Donovan, R J; Jalleh, G; Henley, N

1999-05-01

Twelve (12) road safety television commercials (TVCs) ranging in production costs from $A15,000 to $A250,000 (current prices) were evaluated using standard advertising pre-test procedures. The twelve ads covered four road safety behaviours (speeding; drink driving; fatigue; and inattention), and included a variety of executional types within and across behaviours. One ad in each of the four behaviours was an expensive TAC and ($A200,000 or more). The testing procedure assessed respondents' self-reported impact of the ad on their future intentions to comply with the road safety behavior advocated in the ad. Just under 1000 appropriately screened motor vehicle drivers license holders were recruited via street intercept methods and randomly allocated to one of the twelve and exposure conditions. The results showed that while the two best performing ads were highly dramatic TAC ads showing graphic crash scenes, these were also the most expensive ads to produce, and, being 60 and 90 s, the most expensive to air. In several cases, 30 s low cost talking heads testimonials performed equally as well as their far more expensive counterparts. We conclude that big production budgets may not be necessary to create effective road safety advertising.

Solving a product safety problem using a recycled high density polyethylene container

NASA Technical Reports Server (NTRS)

Liu, Ping; Waskom, T. L.

1993-01-01

The objectives are to introduce basic problem-solving techniques for product safety including problem identification, definition, solution criteria, test process and design, and data analysis. The students are given a recycled milk jug made of high density polyethylene (HDPE) by blow molding. The objectives are to design and perform proper material test(s) so they can evaluate the product safety if the milk jug is used in a certain way which is specified in the description of the procedure for this investigation.

Analysis of existing work-zone devices with MASH safety performance criteria.

DOT National Transportation Integrated Search

2009-02-01

Crashworthy, work-zone, portable sign support systems accepted under NCHRP Report No. 350 were analyzed to : predict their safety peformance according to the TL-3 MASH evaluation criteria. An analysis was conducted to determine : which hardware param...

48 CFR 970.5223-1 - Integration of environment, safety, and health into work planning and execution.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Integration of environment... Integration of environment, safety, and health into work planning and execution. As prescribed in 970.2303-3(b), insert the following clause: Integration of Environment, Safety, and Health Into Work Planning and...

48 CFR 952.223-71 - Integration of environment, safety, and health into work planning and execution.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Integration of environment, safety, and health into work planning and execution. 952.223-71 Section 952.223-71 Federal Acquisition... Provisions and Clauses 952.223-71 Integration of environment, safety, and health into work planning and...

[Study on the occupational stress norm and it's application for the marketing group, public service/safety group and production laborer group].

PubMed

Yang, Xin-Wei; Wang, Zhi-Ming; Jin, Tai-Yi; Lan, Ya-Jia

2006-09-01

A study of the occupational stress norm and it's application for the marketing group, public service/safety group and production laborer group. In this study, cross-sectional study method is used, and a synthetic way of sorting and randomized sampling is adopted to deal with research targets (36 marketing group, 331 public service/safety group, 903 production laborer group). Descriptive statistics for OSI-R scale scores for the marketing group, public service/safety group and production laborer group were modulated. Scale raw score to T-score conversion tables derived from the OSI-R normative sample for marketing group public service/safety group and production laborer group were established. OSI-R profile from for marketing group, public service/safety group and production laborer group were established. For the ORQ and PSQ scales, scores at or above 70 indicate a strong levels of maladaptive stress and strain. Score in the range of 60 to 69 suggest middle levels of maladaptive stress and strain. Score in the range of 40 to 59 indicate normal levels of stress and strain. Score below 40 indicate a relative absence of occupational stress and strain. For the PRQ scales, score below 30 indicate a significant lack of coping resources. Score in the range of 30 to 39 suggest middle deficits in coping resources. Score in the range of 40 to 59 indicate average coping resources. Scores at or above 60 indicate a strong levels of coping resources. The authors combined subjective and objective environment match model of occupational stress. Different intervention measure should be take to reduce the occupational stress so as to improve the work ability.

Impact of Rhinitis on Work Productivity: A Systematic Review.

PubMed

Vandenplas, Olivier; Vinnikov, Denis; Blanc, Paul D; Agache, Ioana; Bachert, Claus; Bewick, Michael; Cardell, Lars-Olaf; Cullinan, Paul; Demoly, Pascal; Descatha, Alexis; Fonseca, Joao; Haahtela, Tari; Hellings, Peter W; Jamart, Jacques; Jantunen, Juha; Kalayci, Ömer; Price, David; Samolinski, Boleslaw; Sastre, Joaquin; Tian, Longxiu; Valero, Antonio L; Zhang, Xinyi; Bousquet, Jean

2017-10-07

Allergic rhinitis (AR) is increasingly acknowledged as having a substantial socioeconomic impact associated with impaired work productivity, although available information remains fragmented. This systematic review summarizes recently available information to provide a quantitative estimate of the burden of AR on work productivity including lost work time (ie, absenteeism) and reduced performance while working (ie, presenteeism). A Medline search retrieved original studies from 2005 to 2015 pertaining to the impact of AR on work productivity. A pooled analysis of results was carried out with studies reporting data collected through the validated Work Productivity and Activity Impairment (WPAI) questionnaire. The search identified 19 observational surveys and 9 interventional studies. Six studies reported economic evaluations. Pooled analysis of WPAI-based studies found an estimated 3.6% (95% confidence interval [CI], 2.4; 4.8%) missed work time and 35.9% (95% CI, 29.7; 42.1%) had impairment in at-work performance due to AR. Economic evaluations indicated that indirect costs associated with lost work productivity are the principal contributor to the total AR costs and result mainly from impaired presenteeism. The severity of AR symptoms was the most consistent disease-related factor associated with a greater impact of AR on work productivity, although ocular symptoms and sleep disturbances may independently affect work productivity. Overall, the pharmacologic treatment of AR showed a beneficial effect on work productivity. This systematic review provides summary estimates of the magnitude of work productivity impairment due to AR and identifies its main determinant factors. This information may help guide both clinicians and health policy makers. Copyright © 2017 American Academy of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.

Effect of Practice Ownership on Work Environment, Learning Culture, Psychological Safety, and Burnout.

PubMed

Cuellar, Alison; Krist, Alex H; Nichols, Len M; Kuzel, Anton J

2018-04-01

Physicians have joined larger groups and hospital systems in the face of multiple environmental challenges. We examine whether there are differences across practice ownership in self-reported work environment, a practice culture of learning, psychological safety, and burnout. Using cross-sectional data from staff surveys of small and medium-size practices that participated in EvidenceNOW in Virginia, we tested for differences in work environment, culture of learning, psychological safety, and burnout by practice type. We conducted weighted multivariate linear regression of outcomes on ownership, controlling for practice size, specialty mix, payer mix, and whether the practice was located in a medically underserved area. We further analyzed clinician and staff responses separately. Participating were 104 hospital-owned and 61 independent practices and 24 federally qualified health centers (FQHCs). We analyzed 2,005 responses from practice clinicians and staff, a response rate of 49%. Working in a hospital-owned practice was associated with favorable ratings of work environment, psychological safety, and burnout compared with independent practices. When we examined separately the responses of clinicians vs staff, however, the association appears to be largely driven by staff. Hospital ownership was associated with positive perceptions of practice work environment and lower burnout for staff relative to independent ownership, whereas clinicians in FQHCs perceive a more negative, less joyful work environment and burnout. Our findings are suggestive that clinician and nonclinician staff perceive practice adaptive reserve differently, which may have implications for creating the energy for ongoing quality improvement work. © 2018 Annals of Family Medicine, Inc.

76 FR 1137 - Publicly Available Consumer Product Safety Information Database: Notice of Public Web Conferences

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-07

...: Notice of Public Web Conferences AGENCY: Consumer Product Safety Commission. ACTION: Notice. SUMMARY: The Consumer Product Safety Commission (``Commission,'' ``CPSC,'' or ``we'') is announcing two Web conferences... database (``Database''). The Web conferences will be webcast live from the Commission's headquarters in...

Exploring the Influence of Nursing Work Environment and Patient Safety Culture on Missed Nursing Care in Korea.

PubMed

Kim, Kyoung-Ja; Yoo, Moon Sook; Seo, Eun Ji

2018-04-20

This study aimed to explore the influence of nurse work environment and patient safety culture in hospital on instances of missed nursing care in South Korea. A cross-sectional design was used, in which a structured questionnaire was administered to 186 nurses working at a tertiary university hospital. Data were analyzed using descriptive statistics, t-test or ANOVA, Pearson correlation and multiple regression analysis. Missed nursing care was found to be correlated with clinical career, nursing work environment and patient safety culture. The regression model explained approximately 30.3 % of missed nursing care. Meanwhile, staffing and resource adequacy (β = -.31, p = .001), nurse manager ability, leadership and support of nurses (β = -.26, p = .004), clinical career (β = -.21, p = .004), and perception on patient safety culture within unit (β = -.19, p = .041) were determined to be influencing factors on missed nursing care. This study has significance as it suggested that missed nursing care is affected by work environment factors within unit. This means that missed nursing care is a unit outcome affected by nurse work environment factors and patient safety culture. Therefore, missed nursing care can be managed through the implementation of interventions that promote a positive nursing work environment and patient safety culture. Copyright © 2018. Published by Elsevier B.V.

Type A behavior pattern, accident optimism and fatalism: an investigation into non-compliance with safety work behaviors among hospital nurses.

PubMed

Ugwu, Fabian O; Onyishi, Ike E; Ugwu, Chidi; Onyishi, Charity N

2015-01-01

Safety work behavior has continued to attract the interest of organizational researchers and practitioners especially in the health sector. The goal of the study was to investigate whether personality type A, accident optimism and fatalism could predict non-compliance with safety work behaviors among hospital nurses. One hundred and fifty-nine nursing staff sampled from three government-owned hospitals in a state in southeast Nigeria, participated in the study. Data were collected through Type A Behavior Scale (TABS), Accident Optimism, Fatalism and Compliance with Safety Behavior (CSB) Scales. Our results showed that personality type A, accident optimism and fatalism were all related to non-compliance with safety work behaviors. Personality type A individuals tend to comply less with safety work behaviors than personality type B individuals. In addition, optimistic and fatalistic views about accidents and existing safety rules also have implications for compliance with safety work behaviors.

Safety and fitness electronic records (SAFER) system : logical architecture document : working draft

DOT National Transportation Integrated Search

1997-01-31

This Logical Architecture Document includes the products developed during the functional analysis of the Safety and Fitness Electronic Records (SAFER) System. This document, along with the companion Operational Concept and Physical Architecture Docum...

Voluntary Product Standard PS 72-76: Toy Safety.

ERIC Educational Resources Information Center

National Bureau of Standards (DOC), Washington, DC.

The purpose of this voluntary product standard is to establish nationally recognized safety requirements and test methods for toys intended for use by children in age groups through 14 years. The standard relates to possible hazards that may not be readily recognized and which may be encountered in,normal use or after reasonably foreseeable abuse.…

77 FR 74196 - Draft Guidance for Industry on Safety Considerations for Product Design To Minimize Medication...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-13

... document, which addresses safety achieved through drug product design, is the first in a series of planned...] Draft Guidance for Industry on Safety Considerations for Product Design To Minimize Medication Errors... Considerations for Product Design to Minimize Medication Errors.'' The draft guidance provides sponsors of...

Why "Working Smarter" Isn't Working: White-Collar Productivity Improvement.

ERIC Educational Resources Information Center

Shaw, Edward

2001-01-01

Discusses the productivity and work days of white collar workers. Topics include productivity improvement; task analysis; the amount of time spent reading, and how to reduce it by improving writing skills; time spent in meetings; empowered time management; and sustaining a climate for change. (LRW)

Working together to ensure safety at hydro projects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartel, J.W.

Providing for public safety around a hydroelectric facility can be critically important to the welfare of a hydro-power producer. With this in mind, Wisconsin Electric Power Company and Wisconsin Public Service Corporation have worked together to develop consistent safety signage and several for their hydro projects. Although the two utilities sometimes compete for electric customers, they cooperate to ensure the safety to those customers. Both WE and WPS took steps in 1986 to make their operations safer through involvement in the Wisconsin/Michigan Hydro User Group. The organization has 25 members-primarily of electric utilities and paper companies-who operate hydro facilities inmore » the two states. The two areas that the HUG studied in public safety were signs and warning systems. HUG established a sign committee to study how to increase safety of people around hydro plants through signs, explained Ted Handrick, hydro plant superintendent at WPS. The committee's recommendations led to development of a statewide uniform sign system adopted by all HUG members. The committee used Wisconsin Department of Natural Resources' guidelines for warning signs and portages in developing the signage standards. HUG members are converting to these new sign standards as they replace old signs and/or install new signs. Notices describing the new signage system have been placed near each hydro plant, at boat landings, and in campgrounds. The signs are mounted well above ground level so they can be seen and easily read by recreationalists. Warning systems, in accordance with HUG warning standards, were installed at WE and WPS hydro facilities. These systems alert nearby recreational users of rapid increases in water flow when generating units are turned on or when spillway gates are opened. Soon after the authors installed equipment to remotely operate its hydro facilities, the utility experienced a dramatic increase increase in intrusion on dams and other structures at the

Roles of safety climate and shift work on perceived injury risk: a multi-level analysis.

PubMed

Huang, Yueng-Hsiang; Chen, Jiu-Chiuan; DeArmond, Sarah; Cigularov, Konstantin; Chen, Peter Y

2007-11-01

This study evaluated the relationship between employees' work shift (i.e., day shift versus night shift) and perceptions of injury risk, and how the relationship is affected by company level safety climate and injury frequency. The results showed that night shift workers perceived a higher level of injury risk compared to day shift workers. Both company level safety climate and injury frequency played critical roles in predicting individual perceived work injury risk. Perception of injury risk of night shift workers was significantly lower when they perceived high-level rather than low-level safety climate. However, this pattern was not noticeable for day shift workers. These findings highlighted the importance of considering company level factors when attempting to understand the differences between day shift and night shift work on an individual's perception of injury risk.

The Variation of Work Productivity and Muscle Activities at Different Levels of Production Target

NASA Astrophysics Data System (ADS)

Nur, Nurhayati Mohd; Dawal, Siti Zawiah Md; Dahari, Mahidzal; Zuhairah Mahmud Zuhudi, Nurul

2017-10-01

This paper aims to investigate the variation of work productivity and muscle activities among workers performing industrial repetitive tasks at four different levels of production target. The work productivity and muscle activities data were recorded from twenty workers at four levels of production target corresponding to “participative (PS1)”, “normal (PS2)”, “high (PS3)” and “very high (PS4)”. The results showed that worker productivity was found to increase at higher production target and there was a significant change (p < 0.005) in work productivity across the four different production targets. The muscle activities were found to increase at higher production target and correspond to more discomfort and a higher rate of muscle fatigue. The results indicated that working with a higher production target results in higher worker productivity, but could lead to higher risk of WMSDs.

The conception of fashion products for children: reflections on safety parameters.

PubMed

Prete, Lígia Gomes Pereira; Emidio, Lucimar de Fátima Bilmaia; Martins, Suzana Barreto

2012-01-01

The purpose of this study is to reflect on safety requirements for children's clothing, based on the standardization proposed by the ABNT (Technical Standardization Brazilian Association). Bibliographic research and case studies were considered on writing this work. We also discuss the importance of adding other safety requirements to the current standardization, as well as the increasing of the actual age range specified by the ABNT, following the children's clothing safety standardizations in Portugal and the United States, also stated here.

Ares I-X Range Safety Flight Envelope Analysis

NASA Technical Reports Server (NTRS)

Starr, Brett R.; Olds, Aaron D.; Craig, Anthony S.

2011-01-01

Ares I-X was the first test flight of NASA's Constellation Program's Ares I Crew Launch Vehicle designed to provide manned access to low Earth orbit. As a one-time test flight, the Air Force's 45th Space Wing required a series of Range Safety analysis data products to be developed for the specified launch date and mission trajectory prior to granting flight approval on the Eastern Range. The range safety data package is required to ensure that the public, launch area, and launch complex personnel and resources are provided with an acceptable level of safety and that all aspects of prelaunch and launch operations adhere to applicable public laws. The analysis data products, defined in the Air Force Space Command Manual 91-710, Volume 2, consisted of a nominal trajectory, three sigma trajectory envelopes, stage impact footprints, acoustic intensity contours, trajectory turn angles resulting from potential vehicle malfunctions (including flight software failures), characterization of potential debris, and debris impact footprints. These data products were developed under the auspices of the Constellation's Program Launch Constellation Range Safety Panel and its Range Safety Trajectory Working Group with the intent of beginning the framework for the operational vehicle data products and providing programmatic review and oversight. A multi-center NASA team in conjunction with the 45th Space Wing, collaborated within the Trajectory Working Group forum to define the data product development processes, performed the analyses necessary to generate the data products, and performed independent verification and validation of the data products. This paper outlines the Range Safety data requirements and provides an overview of the processes established to develop both the data products and the individual analyses used to develop the data products, and it summarizes the results of the analyses required for the Ares I-X launch.

16 CFR 1115.5 - Reporting of failures to comply with a voluntary consumer product safety standard relied upon by...

Code of Federal Regulations, 2010 CFR

2010-01-01

... voluntary consumer product safety standard relied upon by the Commission under section 9 of the CPSA. 1115.5 Section 1115.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SUBSTANTIAL PRODUCT HAZARD REPORTS General Interpretation § 1115.5 Reporting of failures to comply...

9 CFR 381.182 - Reports of inspection work.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Reports of inspection work. 381.182 Section 381.182 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE....182 Reports of inspection work. Reports of the inspection work carried on within official...

Adapting viral safety assurance strategies to continuous processing of biological products.

PubMed

Johnson, Sarah A; Brown, Matthew R; Lute, Scott C; Brorson, Kurt A

2017-01-01

There has been a recent drive in commercial large-scale production of biotechnology products to convert current batch mode processing to continuous processing manufacturing. There have been reports of model systems capable of adapting and linking upstream and downstream technologies into a continuous manufacturing pipeline. However, in many of these proposed continuous processing model systems, viral safety has not been comprehensively addressed. Viral safety and detection is a highly important and often expensive regulatory requirement for any new biological product. To ensure success in the adaption of continuous processing to large-scale production, there is a need to consider the development of approaches that allow for seamless incorporation of viral testing and clearance/inactivation methods. In this review, we outline potential strategies to apply current viral testing and clearance/inactivation technologies to continuous processing, as well as modifications of existing unit operations to ensure the successful integration of viral clearance into the continuous processing of biological products. Biotechnol. Bioeng. 2017;114: 21-32. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Safety in construction--a comprehensive description of the characteristics of high safety standards in construction work, from the combined perspective of supervisors and experienced workers.

PubMed

Törner, Marianne; Pousette, Anders

2009-01-01

The often applied engineering approach to safety management in the construction industry needs to be supplemented by organizational measures and measures based on how people conceive and react to their social environment. This requires in-depth knowledge of the broad preconditions for high safety standards in construction. The aim of the study was to comprehensively describe the preconditions and components of high safety standards in the construction industry from the perspective of both experienced construction workers and first-line managers. Five worker safety representatives and 19 first-line managers were interviewed, all strategically selected from within a large Swedish construction project. Phenomenographic methodology was used for data acquisition and analysis and to categorize the information. Nine informants verified the results. The study identified four main categories of work safety preconditions and components: (1) Project characteristics and nature of the work, which set the limits of safety management; (2) Organization and structures, with the subcategories planning, work roles, procedures, and resources; (3) Collective values, norms, and behaviors, with the subcategories climate and culture, and interaction and cooperation; and (4) Individual competence and attitudes, with the subcategories knowledge, ability and experience, and individual attitudes. The results comprehensively describe high safety standards in construction, incorporating organizational, group, individual, and technical aspects. High-quality interaction between different organizational functions and hierarchical levels stood out as important aspects of safety. The results are discussed in relation to previous research into safety and into the social-psychological preconditions for other desired outcomes in occupational settings. The results can guide construction companies in planning and executing construction projects to a high safety standard.

Lost working days, productivity, and restraint use among occupants of motor vehicles that crashed in the United States.

PubMed

Ebel, B E; Mack, C; Diehr, P; Rivara, F P

2004-10-01

In 2001, 6.3 million passengers were involved in motor vehicle crashes. This study aimed to determine the number of work days lost as a result of motor vehicle crashes and factors that influenced people's return to work. This was a retrospective, population based cohort study of occupants in motor vehicles involved in crashes from the 1993-2001 Crashworthiness Data System produced by the National Highway Traffic Safety Administration. The sample population of people aged 18-65 years included two groups: occupants who survived and were working before the crash and occupants who were injured fatally and were estimated to have been working before the crash. Multivariate linear regression was used to analyze the impact of restraint use and injury type on return to work. Overall, 30.1% of occupants of vehicles that crashed missed one or more days of work. A crash resulted in a mean 28.0 (95% confidence interval 15.8 to 40.1) days lost from work, including losses associated with fatalities. The 2.1 million working occupants of vehicles that crashed in 2001 lost a total of 60 million days of work, resulting in annual productivity losses of over $7.5 billion (2964 to 12 075). Unrestrained vehicle occupants accounted for $5.6 billion in lost productivity. Motor vehicle crashes result in large and potentially preventable productive losses that are mostly attributable to fatal injuries.

Assessment of contributions to patient safety knowledge by the Agency for Healthcare Research and Quality-funded patient safety projects.

PubMed

Sorbero, Melony E S; Ricci, Karen A; Lovejoy, Susan; Haviland, Amelia M; Smith, Linda; Bradley, Lily A; Hiatt, Liisa; Farley, Donna O

2009-04-01

To characterize the activities of projects funded in Agency for Healthcare Research and Quality (AHRQ)'s patient safety portfolio and assess their aggregate potential to contribute to knowledge development. Information abstracted from proposals for projects funded in AHRQ's patient safety portfolio, information on safety practices from the AHRQ Evidence Report on Patient Safety Practices, and products produced by the projects. This represented one part of the process evaluation conducted as part of a longitudinal evaluation based on the Context–Input–Process–Product model. The 234 projects funded through AHRQ's patient safety portfolio examined a wide variety of patient safety issues and extended their work beyond the hospital setting to less studied parts of the health care system. Many of the projects implemented and tested practices for which the patient safety evidence report identified a need for additional evidence. The funded projects also generated a substantial body of new patient safety knowledge through a growing number of journal articles and other products. The projects funded in AHRQ's patient safety portfolio have the potential to make substantial contributions to the knowledge base on patient safety. The full value of this new knowledge remains to be confirmed through the synthesis of results

Guide to active vaccine safety surveillance: Report of CIOMS working group on vaccine safety - executive summary.

PubMed

Heininger, U; Holm, K; Caplanusi, I; Bailey, S R

2017-07-13

In 2013, the Council for International Organizations of Medical Sciences (CIOMS) created a Working Group on Vaccine Safety (WG) to address unmet needs in the area of vaccine pharmacovigilance. Generating reliable data about specific vaccine safety concerns is becoming a priority due to recent progress in the development and deployment of new vaccines of global importance, as well as novel vaccines targeting diseases specifically endemic to many resource-limited countries (RLCs), e.g. malaria, dengue. The WG created a Guide to Active Vaccine Safety Surveillance (AVSS) to assist national regulatory authorities and national immunization program officers in RLCs in determining the best course of action with regards to non-routine pharmacovigilance activities, when confronted with a launch of a new vaccine or a vaccine that is new to their country. Here we summarize the results of the WG, further detailed in the Guide, which for the first time provides a structured approach to identifying and analyzing specific vaccines safety knowledge gaps, while considering all available sources of information, in order to determine whether AVSS is an appropriate solution. If AVSS is confirmed as being the appropriate tool, the Guide provides additional essential information on AVSS, a detailed overview of common types of AVSS and practical implementation considerations. It also provides a framework for a well-constructed and informative AVSS when needed, thus aiming to ensure the best possible safety of immunization in this new landscape. Copyright © 2017 Elsevier Ltd. All rights reserved.

Productivity and safety in worker cooperatives and conventional firms.

PubMed

Grunberg, L; Everard, J; O'Toole, M

1984-01-01

This paper examines the relationship between productivity and workers' safety in firms characterized by very different types of relations in production. Arguments are developed to explain why worker cooperatives are expected to have higher productivity and lower accident rates than conventional capitalist firms. Workers who own and control their firms are expected to have a greater incentive to be efficient and a greater ability to safeguard their health than workers employed under hierarchical and alienating conditions. The hypotheses are tested by comparing carefully matched conventional and cooperative plywood companies. Preliminary results suggest that while cooperatives may be more productive they are not safer, indicating the limits of the isolated cooperative form in capitalist market economies.

9 CFR 354.90 - Report of inspection work.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Report of inspection work. 354.90 Section 354.90 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE... Report of inspection work. Reports of the work of inspection carried on within official plants shall be...

FDA working to ensure the safety of medical devices used in the pediatric population.

PubMed

Flack, Marilyn Neder; Gross, Thomas P; Reid, Joy Samuels; Mills, Thalia T; Francis, Jacqueline

2012-12-01

Special initiatives exist in FDA's Center for Devices and Radiological Health (CDRH), the Center for Drug Evaluation and Research, and the Center for Biologics Evaluation and Research to ensure the safety and effectiveness of medical products used in the vulnerable pediatric population. This article focuses on the special programs, projects, and special studies implemented by CDRH to ensure this safety and effectiveness in devices used in pediatric patients throughout the devices' total product life-cycles. Pediatricians play a major role in keeping medical devices safe for use in children by reporting device problems to FDA. Published by Elsevier Inc.

The Work Design Method for Human Friendly

NASA Astrophysics Data System (ADS)

Harada, Narumi; Sasaki, Masatoshi; Ichikawa, Masami

In order to realize “the product life cycle with respect for human nature". we ought to make work design so that work environment should be configured to be sound in mind and body, with due consideration of not only physical but also mental factors from the viewpoint of workers. The former includes too heavy work, unreasonable working posture, local fatigue of the body, the safety, and working comfort, and the latter includes work motivation, work worthiness, stress, etc. For the purpose of evaluating the degree of working comfort and safety at human-oriented production lines, we acknowledged, for the work design, the effectiveness of the work designing technique with working time variation duly considered. And, we formulated a model for a mental factor experienced by workers from the degree of working delays. This study covers a work design technique we developed with the effect of the factor as the value of evaluation.

Key aspects in managing safety when working with multiple contractors: A case study.

PubMed

Drupsteen, Linda; Rasmussen, Hanna B; Ustailieva, Erika; van Kampen, Jakko

2015-01-01

Working with multiple contractors in a shared workplace can introduce and increase safety risks due to complexity. The aim of this study was to explore how safety issues are recognized in a specific case and to identify whether clients and contractors perceive problems similarly. The safety issues are explored through a brief survey and a workshop in the maintenance department of a logistics company. The results indicate that culture and behavior are recognized differently by clients and by contractors. The contractors and client had different perceptions of involvement of contractors by the client. The contractors complained on lack of involvement, which was not fully recognized by the client. The case study used a practical approach to show differences in perception of safety within a project. The study illustrates the need for more applied studies and interventions on contractor safety.

9 CFR 352.9 - Report of inspection work.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Report of inspection work. 352.9 Section 352.9 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE... inspection work. Reports of the work of inspection carried on within the field ante-mortem inspection area of...

Safety Issues at the Defense Production Reactors. A Report to the U.S. Department of Energy.

ERIC Educational Resources Information Center

National Academy of Sciences - National Research Council, Washington, DC. Commission on Physical Sciences, Mathematics, and Resources.

This report provides an assessment of safety management, safety review, and safety methodology employed by the Department of Energy (DOE) and private contractors. Chapter 1, "The DOE Safety Framework," examines safety objectives for production reactors and processes to implement the objectives. Chapter 2, "Technical Issues,"…

16 CFR 1500.88 - Exemptions from lead limits under section 101 of the Consumer Product Safety Improvement Act for...

Code of Federal Regulations, 2010 CFR

2010-01-01

... 101 of the Consumer Product Safety Improvement Act for certain electronic devices. 1500.88 Section... from lead limits under section 101 of the Consumer Product Safety Improvement Act for certain electronic devices. (a) The Consumer Product Safety Improvement Act (CPSIA) provides for specific lead limits...

100 years of occupational safety research: From basic protections and work analysis to a multilevel view of workplace safety and risk.

PubMed

Hofmann, David A; Burke, Michael J; Zohar, Dov

2017-03-01

Starting with initiatives dating back to the mid-1800s, we provide a high-level review of the key trends and developments in the application of applied psychology to the field of occupational safety. Factory laws, basic worker compensation, and research on accident proneness comprised much of the early work. Thus, early research and practice very much focused on the individual worker, the design of their work, and their basic protection. Gradually and over time, the focus began to navigate further into the organizational context. One of the early efforts to broaden beyond the individual worker was a significant focus on safety-related training during the middle of the 20th century. Toward the latter years of the 20th century and continuing the move from the individual worker to the broader organizational context, there was a significant increase in leadership and organizational climate (safety climate) research. Ultimately, this resulted in the development of a multilevel model of safety culture/climate. After discussing these trends, we identify key conclusions and opportunities for future research. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Sex work and health: a question of safety in the workplace.

PubMed

Alexander, P

1998-01-01

Sex work is an occupation or trade involving exchange of sexual services for economic compensation. Although health problems associated with prostitution, such as sexually transmitted diseases and violence, are commonly assumed to be "risks of the trade," the illegality and stigma of prostitution have prevented the medical establishment from viewing it through the lens of occupational safety and health. They have also resulted in a failure to look at such day-to-day conditions and illnesses as repetitive stress injuries and other musculoskeletal problems, bladder infections, and work-related stress that may be of more immediate concern to sex workers. This paper reviews what is known about the safety and health hazards associated with prostitution through some formal research, but primarily through informal discussions with sex workers over two decades. The overarching factor affecting the health of sex workers is the legal context, thus that is reviewed first; then I look at occupational hazards and conclude with some suggestions for immediate action and further research.

Patient Drug Safety Reporting: Diabetes Patients' Perceptions of Drug Safety and How to Improve Reporting of Adverse Events and Product Complaints.

PubMed

Patel, Puja; Spears, David; Eriksen, Betina Østergaard; Lollike, Karsten; Sacco, Michael

2018-03-01

Global health care manufacturer Novo Nordisk commissioned research regarding awareness of drug safety department activities and potential to increase patient feedback. Objectives were to examine patients' knowledge of pharmaceutical manufacturers' responsibilities and efforts regarding drug safety, their perceptions and experiences related to these efforts, and how these factors influence their thoughts and behaviors. Data were collected before and after respondents read a description of a drug safety department and its practices. We conducted quantitative survey research across 608 health care consumers receiving treatment for diabetes in the United States, Germany, United Kingdom, and Italy. This research validated initial, exploratory qualitative research (across 40 comparable consumers from the same countries) which served to guide design of the larger study. Before reading a drug safety department description, 55% of respondents were unaware these departments collect safety information on products and patients. After reading the description, 34% reported the department does more than they expected to ensure drug safety, and 56% reported "more confidence" in the industry as a whole. Further, 66% reported themselves more likely to report an adverse event or product complaint, and 60% reported that they were more likely to contact a drug safety department with questions. The most preferred communication methods were websites/online forums (39%), email (27%), and telephone (25%). Learning about drug safety departments elevates consumers' confidence in manufacturers' safety efforts and establishes potential for patients to engage in increased self-monitoring and reporting. Study results reveal potentially actionable insights for the industry across patient and physician programs and communications.

Improving Student Concern for Safety in a Production Technology Lab through the Use of Teambuilding.

ERIC Educational Resources Information Center

Lacina, Dale Robert

The effectiveness of team building as a strategy for improving students' concern for safety in a production technology laboratory was examined in a study involving a group of grade 9 and 10 production technology students from an urban, lower-middle-class community in western Illinois. Students' safety test scores, teacher checklists, and…

77 FR 51912 - Safety Zone; Tom Lyons Productions Fireworks, Long Island Sound, Sands Point, NY

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-28

... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 165 [Docket Number USCG-2012-0618] RIN 1625-AA00 Safety Zone; Tom Lyons Productions Fireworks, Long Island Sound, Sands Point, NY AGENCY.... 165.T01-0618 to read as follows: Sec. 165.T01-0618 Safety Zone; Tom Lyons Productions Fireworks, Long...

Work-team implementation.

PubMed

Reiste, K K; Hubrich, A

1996-02-01

The authors describe the implementation of the Work-Team Concept at the Frigidaire plans in Jefferson, Iowa. By forming teams, plant staff have made significant improvements in worker safety, product quality, customer service, cost-effectiveness, and overall employee well-being.

Chemical safety of cassava products in regions adopting cassava production and processing--experience from Southern Africa.

PubMed

Nyirenda, D B; Chiwona-Karltun, L; Chitundu, M; Haggblade, S; Brimer, L

2011-03-01

The cassava belt area in Southern Africa is experiencing an unforeseen surge in cassava production, processing and consumption. Little documentation exists on the effects of this surge on processing procedures, the prevailing levels of cyanogenic glucosides of products consumed and the levels of products commercially available on the market. Risk assessments disclose that effects harmful to the developing central nervous system (CNS) may be observed at a lower exposure than previously anticipated. We interviewed farmers in Zambia and Malawi about their cultivars, processing procedures and perceptions concerning cassava and chemical food safety. Chips, mixed biscuits and flour, procured from households and markets in three regions of Zambia (Luapula-North, Western and Southern) as well as products from the Northern, Central and Southern regions of Malawi, were analyzed for total cyanogenic potential (CNp). Processed products from Luapula showed a low CNp, <10 mg HCN equiv./kg air dried weight, while samples from Mongu, Western Province, exhibited high levels of CNp, varying from 50 to 290 mg HCN equiv./kg. Even the lowest level is five times higher than the recommended safety level of 10mg/kg decided on for cassava flour. Our results call for concerted efforts in promoting gender oriented processing technologies. Copyright © 2010 Elsevier Ltd. All rights reserved.

Comprehensive safety document/product.

DOT National Transportation Integrated Search

2013-06-01

With 100 counties and more than 800 cities, towns, and township governments in North Carolina, there is a tremendous need to : disseminate road safety information at the local level. For safety gains to be made in NC communities there needs to be bot...

A Review of the Poultry Meat Production Industry for Food Safety in Indonesia

NASA Astrophysics Data System (ADS)

Wahyono, N. D.; Utami, M. M. D.

2018-01-01

Poultry meat is an indispensable source of animal protein in human growth and development, so it is in great demand by people all over the world. Poultry meat has several advantages, namely the quality of nutrition is good enough, delicious taste, relatively affordable price, easy to get and accepted all levels of society with diverse backgrounds. The era of globalization requires competitive products, such as chicken meat in Indonesia, the current chicken meat industry is not only based on high production capacity and decreased production costs but also chicken products are safe to eat. As a consequence of trade liberalization, the poultry industry faces the threat of competition with cheaper products with better quality. The food safety of chicken meat starts from the farm, processing process until consumed. Food safety is a requirement of food products that must be handled by involving government, industry and consumers.

Do nurse and patient injuries share common antecedents? An analysis of associations with safety climate and working conditions.

PubMed

Taylor, Jennifer A; Dominici, Francesca; Agnew, Jacqueline; Gerwin, Daniel; Morlock, Laura; Miller, Marlene R

2012-02-01

Safety climate and nurses' working conditions may have an impact on both patient outcomes and nurse occupational health, but these outcomes have rarely been examined concurrently. To examine the association of unit-level safety climate and specific nurse working conditions with injury outcomes for both nurses and patients in a single hospital. A cross-sectional study was conducted using nursing-unit level and individual-level data at an urban, level-one trauma centre in the USA. Multilevel logistic regressions were used to examine associations among injury outcomes, safety climate and working conditions on 29 nursing units, including a total of 723 nurses and 28 876 discharges. Safety climate was measured in 2004 using the Safety Attitudes Questionnaire (SAQ). Working conditions included registered nursing hours per patient day (RNHPPD) and unit turnover. Patient injuries included 290 falls, 167 pulmonary embolism/deep vein thrombosis (PE/DVT), and 105 decubitus ulcers. Nurse injury was defined as a reported needle-stick, splash, slip, trip, or fall (n=78). Working conditions and outcomes were measured in 2005. The study found a negative association between two SAQ domains, Safety and Teamwork, with the odds of both decubitus ulcers and nurse injury. RNHPPD showed a negative association with patient falls and decubitus ulcers. Unit turnover was positively associated with nurse injury and PE/DVT, but negatively associated with falls and decubitus ulcers. Safety climate was associated with both patient and nurse injuries, suggesting that patient and nurse safety may actually be linked outcomes. The findings also indicate that increased unit turnover should be considered a risk factor for nurse and patient injuries.

Self-employed individuals performing different types of work have different occupational safety and health problems.

PubMed

Park, Jungsun; Han, Boyoung; Kim, Yangho

2018-05-22

We assessed the occupational safety and health (OSH) issues of self-employed individuals in Korea. The working conditions and OSH issues in three groups were analyzed using the Korean Working Conditions Survey of 2014. Among self-employed individuals, "Physical work" was more common among males, whereas "Emotional work" was more common among females. Self-employed individuals performing "Mental work" had more education, higher incomes, and the lowest exposure to physical/chemical and ergonomic hazards in the workplace. In contrast, those performing "Physical work" were older, had less education, lower incomes, greater exposure to physical/chemical and ergonomic hazards in the workplace, and more health problems. Individuals performing "Physical work" were most vulnerable to OSH problems. The self-employed are a heterogeneous group of individuals. We suggest development of specific strategies that focus on workers performing "Physical work" to improve the health and safety of self-employed workers in Korea. © 2018 Wiley Periodicals, Inc.

77 FR 61513 - Information Disclosure Under Section 6(b) of the Consumer Product Safety Act

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-10

... CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Part 1101 Information Disclosure Under Section 6(b) of the Consumer Product Safety Act CFR Correction 0 In Title 16 of the Code of Federal Regulations, Part 1000 to End, revised as of January 1, 2012, on page 147, in Sec. 1101.25 (a) and (b), the words ``5...

A work observation study of nuclear medicine technologists: interruptions, resilience and implications for patient safety.

PubMed

Larcos, George; Prgomet, Mirela; Georgiou, Andrew; Westbrook, Johanna

2017-06-01

Errors by nuclear medicine technologists during the preparation of radiopharmaceuticals or at other times can cause patient harm and may reflect the impact of interruptions, busy work environments and deficient systems or processes. We aimed to: (a) characterise the rate and nature of interruptions technologists experience and (b) identify strategies that support safety. We performed 100 hours of observation of 11 technologists at a major public hospital and measured the proportions of time spent in eight categories of work tasks, location of task, interruption rate and type and multitasking (tasks conducted in parallel). We catalogued specific safety-oriented strategies used by technologists. Technologists completed 5227 tasks and experienced 569 interruptions (mean, 4.5 times per hour; 95% CI 4.1 to 4.9). The highest interruption rate occurred when technologists were in transit between rooms (10.3 per hour (95% CI 8.3 to 12.5)). Interruptions during radiopharmaceutical preparation occurred a mean of 4.4 times per hour (95% CI 3.3 to 5.6). Most (n=426) tasks were interrupted once only and all tasks were resumed after interruption. Multitasking occurred 16.6% of the time. At least some interruptions were initiated by other technologists to convey important information and/or to render assistance. Technologists employed a variety of verbal and non-verbal strategies in all work areas (notably in the hot-lab) to minimise the impact of interruptions and optimise the safe conduct of procedures. Although most were due to individual choices, some strategies reflected overt or subliminal departmental policy. Some interruptions appear beneficial. Technologists' self-initiated strategies to support safe work practices appear to be an important element in supporting a resilient work environment in nuclear medicine. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

The importance of job control for workers with decreased work ability to remain productive at work.

PubMed

van den Berg, Tilja I; Robroek, Suzan J; Plat, Jan F; Koopmanschap, Marc A; Burdorf, Alex

2011-08-01

Workers with decreased work ability are at greater risk of reduced productivity at work. We hypothesized that work-related characteristics play an important role in supporting workers to remain productive despite decreased work ability. The study population consisted of 10,542 workers in 49 different companies in the Netherlands in 2005-2009. Productivity loss at work was defined on a 10-point scale by asking how much work was actually performed during regular hours on the last regular workday when compared with normal. Independent variables in the logistic regression analysis were individual characteristics, work-related factors, and the work ability index. Additive interactions between work-related factors and decreased work ability were evaluated by the relative excess risk due to interaction (RERI). The odds ratios and 95% confidence intervals (CI) for the likelihood of productivity loss at work were 2.03 (1.85-2.22), 3.50 (3.10-3.95), and 5.54 (4.37-7.03) for a good, moderate, and poor work ability, compared with an excellent work ability (reference group). Productivity loss at work was associated with lack of job control, poor skill discretion, and high work demands. There was a significant interaction between decreased work ability and lack of job control (RERI = 0.63 95% CI 0.11-1.16) with productivity loss at work. The negative effects on work performance of decreased work ability may be partly counterbalanced by increased job control. This suggests that interventions among workers with (chronic) disease that cause a decreased work ability should include enlargement of possibilities to plan and pace their own activities at work.

Perceived Safety at Work in the Wake of Terror: The Importance of Security Measures and Emergency Preparedness.

PubMed

Nissen, Alexander; Heir, Trond

2016-12-01

We aimed to explore how perceived safety after terrorism is connected to views on security measures and emergency preparedness in a workplace setting. Using a questionnaire-based, cross-sectional study of ministerial employees in Norway who were targeted in a terrorist attack in 2011 (n=3344), we investigated how employees' perceived safety at work 9 to 10 months after the attack was associated with their perceptions of whether security measures were sufficiently prioritized at work, whether there had been sufficient escape and evacuation training, and whether they were confident with evacuation procedures. We found strong evidence of increasing perceived safety at work the more employees believed security measures were sufficiently prioritized at work (partially confounded by post-traumatic stress disorder), and the better their knowledge of evacuation procedures (modified by gender and education). The present study suggests that employers may enhance perceived safety at work for terror-exposed employees by showing a commitment to security measures and by ensuring employees know evacuation procedures well. More research is needed to investigate causality patterns behind the associations found in this cross-sectional study. (Disaster Med Public Health Preparedness. 2016;10:805-811).

75 FR 47602 - Clinical Studies of Safety and Effectiveness of Orphan Products Research Project Grant (R01)

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-06

...] Clinical Studies of Safety and Effectiveness of Orphan Products Research Project Grant (R01) AGENCY: Food... product will be superior to the existing therapy. FDA provides grants for clinical studies on safety and... vaccine annually) and an explanation of how the proposed study will either help support product approval...

Impact of Long Farm Working Hours on Child Safety Practices in Agricultural Settings

ERIC Educational Resources Information Center

Marlenga, Barbara; Pahwa, Punam; Hagel, Louise; Dosman, James; Pickett, William

2010-01-01

Objectives: To characterize working hours of adult farm owner-operators and their spouses by season, and to examine associations between working hours and farm safety practices affecting children. Methods: We conducted a secondary analysis of cross-sectional survey data collected as part of an existing study of injury and its determinants.…

Assessment of Contributions to Patient Safety Knowledge by the Agency for Healthcare Research and Quality-Funded Patient Safety Projects

PubMed Central

Sorbero, Melony E S; Ricci, Karen A; Lovejoy, Susan; Haviland, Amelia M; Smith, Linda; Bradley, Lily A; Hiatt, Liisa; Farley, Donna O

2009-01-01

Objective To characterize the activities of projects funded in Agency for Healthcare Research and Quality (AHRQ)' patient safety portfolio and assess their aggregate potential to contribute to knowledge development. Data Sources Information abstracted from proposals for projects funded in AHRQ' patient safety portfolio, information on safety practices from the AHRQ Evidence Report on Patient Safety Practices, and products produced by the projects. Study Design This represented one part of the process evaluation conducted as part of a longitudinal evaluation based on the Context–Input–Process–Product model. Principal Findings The 234 projects funded through AHRQ' patient safety portfolio examined a wide variety of patient safety issues and extended their work beyond the hospital setting to less studied parts of the health care system. Many of the projects implemented and tested practices for which the patient safety evidence report identified a need for additional evidence. The funded projects also generated a substantial body of new patient safety knowledge through a growing number of journal articles and other products. Conclusions The projects funded in AHRQ' patient safety portfolio have the potential to make substantial contributions to the knowledge base on patient safety. The full value of this new knowledge remains to be confirmed through the synthesis of results. PMID:21456108

Food safety issues associated with products from aquaculture. Report of a Joint FAO/NACA/WHO Study Group.

PubMed

1999-01-01

The past decade has seen rapid expansion in aquaculture production. In the fisheries sector, as in animal production, farming is replacing hunting as the primary food production strategy. In future, farmed fish will be an even more important source of protein foods than they are today, and the safety for human consumption of products from aquaculture is of public health significance. This is the report of a Study Group that considered food safety issues associated with farmed finfish and crustaceans. The principal conclusion was that an integrated approach--involving close collaboration between the aquaculture, agriculture, food safety, health and education sectors--is needed to identify and control hazards associated with products from aquaculture. Food safety assurance should be included in fish farm management and form an integral part of the farm-to-table food safety continuum. Where appropriate, measures should be based on Hazard Analysis and Critical Control Point (HACCP) methods; however, difficulties in applying HACCP principles to small-scale farming systems were recognized. Food safety hazards associated with products from aquaculture differ according to region, habitat and environmental conditions, as well as methods of production and management. Lack of awareness of hazards can hinder risk assessment and the application of risk management strategies to aquaculture production, and education is therefore needed. Chemical and biological hazards that should to be taken into account in public health policies concerning products from aquaculture are discussed in this report, which should be of use to policy-makers and public health officials. The report will also assist fish farmers to identify hazards and develop appropriate hazard-control strategies.

Working with Persistent Pain: An Exploration of Strategies Utilised to Stay Productive at Work.

PubMed

Oakman, Jodi; Kinsman, Natasha; Briggs, Andrew M

2017-03-01

Purpose Maintaining productive employment for people with persistent pain conditions is challenging. This study aims to explore supports-work and non-work- used by employees to assist them in maintaining productive employment. Methods An exploratory, mixed-methods study comprising a questionnaire battery followed by semi-structured interviews to collect in-depth qualitative data was undertaken. The questionnaires measured descriptive variables used to select participants for interviews based on maximum heterogeneity sampling. Thirty-five semi-structured interviews were undertaken (14 males; 21 females). The interview schedule covered: employment situation, workplace challenges, workplace supports, coping strategies, motivations, future employment options and any other resources utilised. Inductive content analysis was undertaken using a grounded theory approach to systematically explore the data. Results Three key themes were identified: barriers to working productively, enablers to working productively, disclosing my condition at work. A key determinant of maintaining productive employment was a supportive employer. In addition, flexibility in the work organisation was also pivotal in maintaining sustainable, productive employment. An important issue emerged with regard to disclosure of one's condition to an employer. For some, this was a significant barrier to employment. Conclusions To ensure sustainable employment is attainable for those with persistent pain conditions, a good match is required between an employee and their work. Workplace accommodations may assist with improving job fit but this requires disclosure of a condition to an employer. Weighing up the risks and benefits of disclosure is difficult, and may be assisted by knowledge of available supports to assist with maintaining ongoing employment.

Work life and patient safety culture in Canadian healthcare: connecting the quality dots using national accreditation results.

PubMed

Mitchell, Jonathan I

2012-01-01

Fostering quality work life is paramount to building a strong patient safety culture in healthcare organizations. Data from two patient safety culture and work-life questionnaires used for Accreditation Canada's national program were analyzed. Strong team leadership was reported in that units were doing a good job of identifying, assessing and managing risks to patients. Seventy-one percent of respondents gave their unit a positive overall grade on patient safety, and 79% of respondents felt that they could often do their best-quality work in their job. However, healthcare workers felt that they did not have enough time to do their jobs adequately and indicated that co-workers were cutting corners in patient care in order to save time. This article discusses engaging both senior leadership and the entire organization in the change process, ensuring supervisory support, and using performance measures to focus organizational efforts on key priorities all as improvement strategies relevant to these findings. These strategies can be used by organizations across sectors and jurisdictions and by healthcare leaders to positively affect work life and patient safety.

Safety and health in biomass production, transportation, and storage: a commentary based on the biomass and biofuels session at the 2013 North American Agricultural Safety Summit.

PubMed

Yoder, Aaron M; Schwab, Charles; Gunderson, Paul; Murphy, Dennis

2014-01-01

There is significant interest in biomass production ranging from government agencies to the private sector, both inside and outside of the traditional production agricultural setting. This interest has led to an increase in the development and production of biomass crops. Much of this effort has focused on specific segments of the process, and more specifically on the mechanics of these individual segments. From a review of scientific literature, it is seen that little effort has been put into identifying, classifying and preventing safety hazards in on-farm biomass production systems. This commentary describes the current status of the knowledge pertaining to health and safety factors of biomass production and storage in the US and identifies areas of standards development that the biomass industry needs from the agricultural safety and health community.

Prisoner reentry: a public health or public safety issue for social work practice?

PubMed

Patterson, George T

2013-01-01

A significant literature identifies the policy, economic, health, and social challenges that confront released prisoners. This literature also describes the public health and public safety risks associated with prisoner reentry, provides recommendations for improving the reentry process, and describes the effectiveness of prison-based programs on recidivism rates. Public health and public safety risks are particularly significant in communities where large numbers of prisoners are released and few evidence-based services exist. The purpose of this article is to describe the public health and public safety risks that released prisoners experience when they reenter communities, and to discuss the social justice issues relevant for social work practice.

Safety assessment of personal care products/cosmetics and their ingredients.

PubMed

Nohynek, Gerhard J; Antignac, Eric; Re, Thomas; Toutain, Herve

2010-03-01

We attempt to review the safety assessment of personal care products (PCP) and ingredients that are representative and pose complex safety issues. PCP are generally applied to human skin and mainly produce local exposure, although skin penetration or use in the oral cavity, on the face, lips, eyes and mucosa may also produce human systemic exposure. In the EU, US and Japan, the safety of PCP is regulated under cosmetic and/or drug regulations. Oxidative hair dyes contain arylamines, the most chemically reactive ingredients of PCP. Although arylamines have an allergic potential, taking into account the high number of consumers exposed, the incidence and prevalence of hair dye allergy appears to be low and stable. A recent (2001) epidemiology study suggested an association of oxidative hair dye use and increased bladder cancer risk in consumers, although this was not confirmed by subsequent or previous epidemiologic investigations. The results of genetic toxicity, carcinogenicity and reproductive toxicity studies suggest that modern hair dyes and their ingredients pose no genotoxic, carcinogenic or reproductive risk. Recent reports suggest that arylamines contained in oxidative hair dyes are N-acetylated in human or mammalian skin resulting in systemic exposure to traces of detoxified, i.e. non-genotoxic, metabolites, whereas human hepatocytes were unable to transform hair dye arylamines to potentially carcinogenic metabolites. An expert panel of the International Agency on Research of Cancer (IARC) concluded that there is no evidence for a causal association of hair dye exposure with an elevated cancer risk in consumers. Ultraviolet filters have important benefits by protecting the consumer against adverse effects of UV radiation; these substances undergo a stringent safety evaluation under current international regulations prior to their marketing. Concerns were also raised about the safety of solid nanoparticles in PCP, mainly TiO(2) and ZnO in sunscreens. However

Safety assessment of personal care products/cosmetics and their ingredients

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nohynek, Gerhard J., E-mail: gnohynec@rd.loreal.co; Antignac, Eric; Re, Thomas

2010-03-01

We attempt to review the safety assessment of personal care products (PCP) and ingredients that are representative and pose complex safety issues. PCP are generally applied to human skin and mainly produce local exposure, although skin penetration or use in the oral cavity, on the face, lips, eyes and mucosa may also produce human systemic exposure. In the EU, US and Japan, the safety of PCP is regulated under cosmetic and/or drug regulations. Oxidative hair dyes contain arylamines, the most chemically reactive ingredients of PCP. Although arylamines have an allergic potential, taking into account the high number of consumers exposed,more » the incidence and prevalence of hair dye allergy appears to be low and stable. A recent (2001) epidemiology study suggested an association of oxidative hair dye use and increased bladder cancer risk in consumers, although this was not confirmed by subsequent or previous epidemiologic investigations. The results of genetic toxicity, carcinogenicity and reproductive toxicity studies suggest that modern hair dyes and their ingredients pose no genotoxic, carcinogenic or reproductive risk. Recent reports suggest that arylamines contained in oxidative hair dyes are N-acetylated in human or mammalian skin resulting in systemic exposure to traces of detoxified, i.e. non-genotoxic, metabolites, whereas human hepatocytes were unable to transform hair dye arylamines to potentially carcinogenic metabolites. An expert panel of the International Agency on Research of Cancer (IARC) concluded that there is no evidence for a causal association of hair dye exposure with an elevated cancer risk in consumers. Ultraviolet filters have important benefits by protecting the consumer against adverse effects of UV radiation; these substances undergo a stringent safety evaluation under current international regulations prior to their marketing. Concerns were also raised about the safety of solid nanoparticles in PCP, mainly TiO{sub 2} and ZnO in

Dermal safety assessment of Arm & Hammer laundry products formulated for sensitive skin.

PubMed

Frederick, Douglas M; Vorwerk, Linda; Gupta, Archana; Ghassemi, Annahita

2017-09-01

The prevalence of sensitive skin among the general population in industrialized countries is reported to be over 50%. Sensitive skin subjects often report significant reactions to contact with cosmetics, soaps and other consumer products. This paper describes the overall skin compatibility and mildness program for a newly developed, lightly fragranced, colorant free laundry product (i.e. Arm & Hammer™ Sensitive Skin plus Skin-Friendly Fresh Scent), specially formulated for individuals with sensitive skin. The skin mildness of the product was compared to Arm & Hammer™ Free & Clear liquid laundry detergent with no fragrance or colorant, and an established history of safe use by sensitive skin consumers. The test material was a liquid laundry product with a light scent formulated for sensitive skin consumers (Arm & Hammer™ Sensitive Skin plus Skin-Friendly Fresh Scent). The product was compared to commercially marketed products for sensitive skin with a history of skin safety in the marketplace, including: a very similar product formulation (Arm & Hammer™ Free & Clear with no fragrance), and several selected competitors' products. Studies were conducted among individuals with self-assessed sensitive skin (based on a questionnaire) using standard protocols for the Human Repeat Insult Patch Test (HRIPT), 10-Day Cumulative Irritation, the Wrist Band Wear test, and the Safety In-Use testing. Responses in all protocols were evaluated by visual scoring of potential dermatologic reactions, and recording any sensory effects at the time of the examination. In addition, sensory effects collected from panelists' daily diaries were also evaluated. The HRIPT confirmed that neither the fragrance alone, nor the product formulation with fragrance, induced contact sensitization in sensitive skin subjects. The 10-Day cumulative irritation study conducted using sensitive skin subjects showed highly favorable skin compatibility, and the test product was comparable to the control

Deriving and Validating a Road Safety Performance Indicator for Vehicle Fleet Passive Safety

PubMed Central

Page, Marianne; Rackliff, Lucy

2006-01-01

Road safety performance indicators (RSPI) are policy tools which describe the extent of insecure operational safety conditions within traffic systems. This study describes the production of an RSPI which represents the presence within a country’s vehicle fleet, of vehicles that may not effectively protect an occupant in a collision. This work is highly original, as it uses the entire vehicle database of European Union Member States in order to estimate the average level of passive safety offered by the entire fleet in each country. The EuroNCAP safety ratings and vehicle age of each vehicle in each fleet have been obtained to calculate the RSPI. The methodology used could be adopted as an international standard. PMID:16968645

Recognizing and Responding to the "Toxic" Work Environment: Worker Safety, Patient Safety, and Abuse/Neglect in Nursing Homes.

PubMed

Pickering, Carolyn E Z; Nurenberg, Katie; Schiamberg, Lawrence

2017-10-01

This grounded theory study examined how the certified nursing assistant (CNA) understands and responds to bullying in the workplace. Constant comparative analysis was used to analyze data from in-depth telephone interviews with CNAs ( N = 22) who experienced bullying while employed in a nursing home. The result of the analysis is a multistep model describing CNA perceptions of how, over time, they recognized and responded to the "toxic" work environment. The strategies used in responding to the "toxic" environment affected their care provision and were attributed to the development of several resident and worker safety outcomes. The data suggest that the etiology of abuse and neglect in nursing homes may be better explained by institutional cultures rather than individual traits of CNAs. Findings highlight the relationship between worker and patient safety, and suggest worker safety outcomes may be an indicator of quality in nursing homes.

Safety aspects of the production of foods and food ingredients from insects.

PubMed

Schlüter, Oliver; Rumpold, Birgit; Holzhauser, Thomas; Roth, Angelika; Vogel, Rudi F; Quasigroch, Walter; Vogel, Stephanie; Heinz, Volker; Jäger, Henry; Bandick, Nils; Kulling, Sabine; Knorr, Dietrich; Steinberg, Pablo; Engel, Karl-Heinz

2017-06-01

At present, insects are rarely used by the European food industry, but they are a subject of growing interest as an alternative source of raw materials. The risks associated with the use of insects in the production of foods and food ingredients have not been sufficiently investigated. There is a lack of scientifically based knowledge of insect processing to ensure food safety, especially when these processes are carried out on an industrial scale. This review focuses on the safety aspects that need to be considered regarding the fractionation of insects for the production of foods and food ingredients. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Understanding procedural violations using Safety-I and Safety-II: The case of community pharmacies.

PubMed

Jones, Christian E L; Phipps, Denham L; Ashcroft, Darren M

2018-06-01

Procedural violations are known to occur in a range of work settings, and are an important topic of interest with regard to safety management. A Safety-I perspective sees violations as undesirable digressions from standardised procedures, while a Safety-II perspective sees violations as adaptations to a complex work system. This study aimed to apply both perspectives to the examination of violations in community pharmacies. Twenty-four participants (13 pharmacists and 11 pharmacy support staff) were purposively sampled to participate in semi-structured interviews using the critical incident technique. Participants described violations they made during the course of their work. Interviews were digitally recorded, transcribed verbatim and analysed using template analysis. Community pharmacies located in England and Wales. 31 procedural violations were described during the interviews revealing multiple reasons for violations in this setting. Our findings suggest that from a Safety-II perspective, staff violated to adapt to situations and to manage safety. However, participants also violated procedures in order to maintain productivity which was found to increase risk in some, but not all situations. Procedural violations often relied on the context in which staff were working, resulting in the violation being deemed rational to the individual making the violation, yet the behaviour may be difficult to justify from an outside perspective. Combining Safety-I and Safety-II perspectives provided a detailed understanding of the underlying reasons for procedural violations. Our findings identify aspects of practice that could benefit from targeted interventions to help support staff in providing safe patient care.

48 CFR 52.222-4 - Contract Work Hours and Safety Standards Act-Overtime Compensation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... work over 40 hours in any workweek unless they are paid at least 1 and 1/2 times the basic rate of pay... excess of the standard workweek of 40 hours without paying overtime wages required by the Contract Work... CLAUSES Text of Provisions and Clauses 52.222-4 Contract Work Hours and Safety Standards Act—Overtime...

Subjective perception of safety in healthy individuals working with 7 T MRI scanners: a retrospective multicenter survey.

PubMed

Fatahi, Mahsa; Demenescu, Liliana Ramona; Speck, Oliver

2016-06-01

To retrospectively assess perception of safety of healthy individuals working with human 7 Tesla (T) magnetic resonance imaging (MRI) scanners. A total of 66 healthy individuals with a mean age of 31 ± 7 years participated in this retrospective multicentre survey study. Nonparametric correlation analysis was conducted to evaluate the relation between self-reported perception of safety and prevalence of sensory effects while working with 7 T MRI scanners for an average 47 months. The results indicated that 98.5 % of the study participants had a neutral or positive feeling about safety aspects at 7 T MRI scanners. 45.5 % reported that they feel very safe and none of the participants stated that they feel moderately or very unsafe while working with 7 T MRI scanners. Perception of safety was not affected by the number of hours per week spent in the vicinity of the 7 T MRI scanner or the duration of experience with 7 T MRI. More than 50 % of individuals experienced vertigo and metallic taste while working with 7 T MRI scanners. However, participants' perceptions of safety were not affected by the prevalence of MR-related symptoms. The overall data indicated an average perception of a moderately safe work environment. To our knowledge, this study delineates the first attempt to assess the subjective safety perception among 7 T MRI workers and suggests further investigations are indicated.

Example of a Human Factors Engineering approach to a medication administration work system: potential impact on patient safety.

PubMed

Beuscart-Zéphir, Marie-Catherine; Pelayo, Sylvia; Bernonville, Stéphanie

2010-04-01

procedures that might be impaired by the implementation of the CPOE. In this context, a careful redesign of the work situation and of the entire work system is necessary to actually benefit from the installation of the product in terms of patient safety and human performances. In parallel, a usability assessment of the product to be implemented is mandatory to identify potentially dangerous usability flaws and to fix them before the installation. (c) 2009 Elsevier Ireland Ltd. All rights reserved.

76 FR 58049 - Atomic Safety and Licensing Board; Honeywell International, Inc.; Metropolis Works Uranium...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-19

... NUCLEAR REGULATORY COMMISSION [Docket No. 40-3392-MLA; ASLBP No. 11-910-01-MLA-BD01] Atomic Safety and Licensing Board; Honeywell International, Inc.; Metropolis Works Uranium Conversion Facility... assurance for its Metropolis Works uranium conversion facility in Metropolis, Illinois. \\1\\ LBP-11-19, 74...

[Alcohol and work: the role of the company physician in the occupational health and safety management systems].

PubMed

Patussi, V; Muran, A

2010-01-01

The organization of safety in the working places and the increasing attention to behaviours and life styles of workers that may lead to increasing occupational risks are the pick innovative aspects of the recent changes in our country's legislation about occupational safety. In this organization, the role of the company physician is becoming more and more important and his work of evaluation beginning with the knowledge both of the working places and of the workers's lifestyles, is irreplaceable. His role in organizing the managing standards of occupational safety and health cannot be limited to health supervision but must be an essential element in risk assessment in the prevision of workplaces and of safe working conditions, in workers training and information, in organizing the control system of each business. The present paper examines--referring to the current regulation--the duties and functions of a company physician when facing the problems concerning the working risks tied to alcohol assumption.

[Expert investigation on food safety standard system framework construction in China].

PubMed

He, Xiang; Yan, Weixing; Fan, Yongxiang; Zeng, Biao; Peng, Zhen; Sun, Zhenqiu

2013-09-01

Through investigating food safety standard framework among food safety experts, to summarize the basic elements and principles of food safety standard system, and provide policy advices for food safety standards framework. A survey was carried out among 415 experts from government, professional institutions and the food industry/enterprises using the National Food Safety Standard System Construction Consultation Questionnaire designed in the name of the Secretariat of National Food Safety Standard Committee. Experts have different advices in each group about the principles of food product standards, food additive product standards, food related product standards, hygienic practice, test methods. According to the results, the best solution not only may reflect experts awareness of the work of food safety standards situation, but also provide advices for setting and revision of food safety standards for the next. Through experts investigation, the framework and guiding principles of food safety standard had been built.

Process safety improvement--quality and target zero.

PubMed

Van Scyoc, Karl

2008-11-15

Process safety practitioners have adopted quality management principles in design of process safety management systems with positive effect, yet achieving safety objectives sometimes remain a distant target. Companies regularly apply tools and methods which have roots in quality and productivity improvement. The "plan, do, check, act" improvement loop, statistical analysis of incidents (non-conformities), and performance trending popularized by Dr. Deming are now commonly used in the context of process safety. Significant advancements in HSE performance are reported after applying methods viewed as fundamental for quality management. In pursuit of continual process safety improvement, the paper examines various quality improvement methods, and explores how methods intended for product quality can be additionally applied to continual improvement of process safety. Methods such as Kaizen, Poke yoke, and TRIZ, while long established for quality improvement, are quite unfamiliar in the process safety arena. These methods are discussed for application in improving both process safety leadership and field work team performance. Practical ways to advance process safety, based on the methods, are given.

76 FR 6765 - Consumer Product Safety Act: Notice of Commission Action on the Stay of Enforcement of Testing...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-08

... Stay of Enforcement of Testing and Certification Requirements AGENCY: Consumer Product Safety... enforcement of certain testing and certification provisions of section 14 of the Consumer Product Safety Act..., standard, or regulation. For nonchildren's products, the certification must be based on a test of each...

Implementing the 2009 Institute of Medicine recommendations on resident physician work hours, supervision, and safety.

PubMed

Blum, Alexander B; Shea, Sandra; Czeisler, Charles A; Landrigan, Christopher P; Leape, Lucian

2011-01-01

Institute of Medicine report has been largely confined to the medical education community, led by the Accreditation Council for Graduate Medical Education (ACGME). To begin gathering these perspectives and developing a plan to implement safer work hours for resident physicians, a conference entitled "Enhancing sleep, supervision and safety: What will it take to implement the Institute of Medicine recommendations?" was held at Harvard Medical School on June 17-18, 2010. This White Paper is a product of a diverse group of 26 representative stakeholders bringing relevant new information and innovative practices to bear on a critical patient safety problem. Given that our conference included experts from across disciplines with diverse perspectives and interests, not every recommendation was endorsed by each invited conference participant. However, every recommendation made here was endorsed by the majority of the group, and many were endorsed unanimously. Conference members participated in the process, reviewed the final product, and provided input before publication. Participants provided their individual perspectives, which do not necessarily represent the formal views of any organization. In September 2010 the ACGME issued new rules to go into effect on July 1, 2011. Unfortunately, they stop considerably short of the Institute of Medicine's recommendations and those endorsed by this conference. In particular, the ACGME only applied the limitation of 16 hours to first-year resident physicans. Thus, it is clear that policymakers, hospital administrators, and residency program directors who wish to implement safer health care systems must go far beyond what the ACGME will require. We hope this White Paper will serve as a guide and provide encouragement for that effort. RESIDENT PHYSICIAN WORKLOAD AND SUPERVISION: By the end of training, a resident physician should be able to practice independently. Yet much of resident physicians' time is dominated by tasks with little

New technologies and worker safety in western agriculture.

PubMed

Fenske, Richard A

2009-01-01

The New Paths: Health and Safety in Western Agriculture conference, November 11-13, 2008, highlighted the role of technological innovation in agricultural production. The tree fruit industry in the Pacific Northwest has adopted a "technology road map" to reduce production costs and improve efficiency. An agricultural tour provided field demonstrations and discussions on such topics as mobile work platforms in orchards, traumatic and musculoskeletal injuries, and new pest control technologies. Occupational safety and health research will need to adapt to and keep pace with rapid changes in agricultural production processes.

Microbiological quality and safety assessment of lettuce production in Brazil.

PubMed

Ceuppens, Siele; Hessel, Claudia Titze; de Quadros Rodrigues, Rochele; Bartz, Sabrina; Tondo, Eduardo César; Uyttendaele, Mieke

2014-07-02

The microbiological quality and safety of lettuce during primary production in Brazil were determined by enumeration of hygiene indicators Escherichia coli, coliforms and enterococci and detection of enteric pathogens Salmonella and E. coli O157:H7 in organic fertilizers, soil, irrigation water, lettuce crops, harvest boxes and worker's hands taken from six different lettuce farms throughout the crop growth cycle. Generic E. coli was a suitable indicator for the presence of Salmonella and E. coli O157:H7, while coliforms and enterococci were not. Few pathogens were detected: 5 salmonellae and 2 E. coli O157:H7 from 260 samples, of which only one was lettuce and the others were manure, soil and water. Most (5/7) pathogens were isolated from the same farm and all were from organic production. Statistical analysis revealed the following environmental and agro-technical risk factors for increased microbial load and pathogen prevalence in lettuce production: high temperature, flooding of lettuce fields, application of contaminated organic fertilizer, irrigation with water of inferior quality and large distances between the field and toilets. Control of the composting process of organic fertilizers and the irrigation water quality appear most crucial to improve and/or maintain the microbiological quality and safety during the primary production of lettuce. Copyright © 2014 Elsevier B.V. All rights reserved.

Parallel computation safety analysis irradiation targets fission product molybdenum in neutronic aspect using the successive over-relaxation algorithm

NASA Astrophysics Data System (ADS)

Susmikanti, Mike; Dewayatna, Winter; Sulistyo, Yos

2014-09-01

One of the research activities in support of commercial radioisotope production program is a safety research on target FPM (Fission Product Molybdenum) irradiation. FPM targets form a tube made of stainless steel which contains nuclear-grade high-enrichment uranium. The FPM irradiation tube is intended to obtain fission products. Fission materials such as Mo99 used widely the form of kits in the medical world. The neutronics problem is solved using first-order perturbation theory derived from the diffusion equation for four groups. In contrast, Mo isotopes have longer half-lives, about 3 days (66 hours), so the delivery of radioisotopes to consumer centers and storage is possible though still limited. The production of this isotope potentially gives significant economic value. The criticality and flux in multigroup diffusion model was calculated for various irradiation positions and uranium contents. This model involves complex computation, with large and sparse matrix system. Several parallel algorithms have been developed for the sparse and large matrix solution. In this paper, a successive over-relaxation (SOR) algorithm was implemented for the calculation of reactivity coefficients which can be done in parallel. Previous works performed reactivity calculations serially with Gauss-Seidel iteratives. The parallel method can be used to solve multigroup diffusion equation system and calculate the criticality and reactivity coefficients. In this research a computer code was developed to exploit parallel processing to perform reactivity calculations which were to be used in safety analysis. The parallel processing in the multicore computer system allows the calculation to be performed more quickly. This code was applied for the safety limits calculation of irradiated FPM targets containing highly enriched uranium. The results of calculations neutron show that for uranium contents of 1.7676 g and 6.1866 g (× 106 cm-1) in a tube, their delta reactivities are the still

The impact of the work environment of nurses on patient safety outcomes: a multi-level modelling approach.

PubMed

Kirwan, Marcia; Matthews, Anne; Scott, P Anne

2013-02-01

Patient safety is a priority for health services in all countries. The importance of the nurse's role in patient safety has been established. Effective nurse staffing levels, nurse education levels, and a positive work environment for nurses are factors which are known to impact on patient safety outcomes. This study sought to explore the relationship between the ward environment in which nurses practice and specific patient safety outcomes, using ward level variables as well as nurse level variables. The outcomes were nurse-reported patient safety levels in the wards in which they work, and numbers of formal adverse events reports submitted by nurses in the last year. This cross-sectional quantitative study was carried out within a European FP7 project: Nurse Forecasting: Human Resources Planning in Nursing (RN4CAST) project. 108 general medical and surgical wards in 30 hospitals throughout Ireland. All nurses in direct patient care in the study wards were invited to participate. Data from 1397 of these nurses were used in this analysis. A nurse survey was carried out using a questionnaire incorporating the Practice Environment Scale of the Nursing Work Index (PES-NWI). Ethical approval was obtained from the authors' institution and all ethics committees representing the 30 study hospitals. Multilevel modelling was carried out to examine the impact of ward level factors on patient safety. These included proportions of nurses on the ward educated to degree level, and aggregated ward-level mean for PES-NWI scores. The study results support other research findings indicating that a positive practice environment enhances patient safety outcomes. Specifically at ward level, factors such as the ward practice environment and the proportion of nurses with degrees were found to significantly impact safety outcomes. The models developed for this study predicted 76% and 51% of the between-ward variance of these outcomes. The results can be used to enhance patient safety

Global harmonization of food safety regulation from the perspective of Korea and a novel fast automatic product recall system.

PubMed

Sohn, Mun-Gi; Oh, Sangsuk

2014-08-01

Efforts have been made for global harmonization of food safety regulations among countries through international organizations such as WTO and WHO/FAO. Global harmonization of food safety regulations is becoming increasingly important for Korean consumers because more than half of food and agricultural products are imported and consumed. Through recent reorganization of the Korean government, a consolidated national food safety authority-the Ministry of Food and Drug Safety (MFDS)-has been established for more efficient food safety control and better communication with consumers. The Automatic Sales Blocking System (ASBS), which blocks the sales of the recalled food products at the point of sale, has been implemented at over 40,000 retail food stores around the nation using state-of-the art information and communication technology (ICT) for faster recall of adulterated food products, and the e-Food Safety Control System has been developed for more efficient monitoring of national food safety surveillance situations. The National Food Safety Information Service was also established for monitoring and collecting food safety information and incidents worldwide, and shares relevant information with all stakeholders. The new approaches adopted by the Korean Food Safety Authority are expected to enhance public trust with regard to food safety issues and expedite the recall process of adulterated products from the market. © 2013 Society of Chemical Industry.

Safety climate and culture: Integrating psychological and systems perspectives.

PubMed

Casey, Tristan; Griffin, Mark A; Flatau Harrison, Huw; Neal, Andrew

2017-07-01

Safety climate research has reached a mature stage of development, with a number of meta-analyses demonstrating the link between safety climate and safety outcomes. More recently, there has been interest from systems theorists in integrating the concept of safety culture and to a lesser extent, safety climate into systems-based models of organizational safety. Such models represent a theoretical and practical development of the safety climate concept by positioning climate as part of a dynamic work system in which perceptions of safety act to constrain and shape employee behavior. We propose safety climate and safety culture constitute part of the enabling capitals through which organizations build safety capability. We discuss how organizations can deploy different configurations of enabling capital to exert control over work systems and maintain safe and productive performance. We outline 4 key strategies through which organizations to reconcile the system control problems of promotion versus prevention, and stability versus flexibility. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

RFID in the blood supply chain--increasing productivity, quality and patient safety.

PubMed

Briggs, Lynne; Davis, Rodeina; Gutierrez, Alfonso; Kopetsky, Matthew; Young, Kassandra; Veeramani, Raj

2009-01-01

As part of an overall design of a new, standardized RFID-enabled blood transfusion medicine supply chain, an assessment was conducted for two hospitals: the University of Iowa Hospital and Clinics (UIHC) and Mississippi Baptist Health System (MBHS). The main objectives of the study were to assess RFID technological and economic feasibility, along with possible impacts to productivity, quality and patient safety. A step-by-step process analysis focused on the factors contributing to process "pain points" (errors, inefficiency, product losses). A process re-engineering exercise produced blueprints of RFID-enabled processes to alleviate or eliminate those pain-points. In addition, an innovative model quantifying the potential reduction in adverse patient effects as a result of RFID implementation was created, allowing improvement initiatives to focus on process areas with the greatest potential impact to patient safety. The study concluded that it is feasible to implement RFID-enabled processes, with tangible improvements to productivity and safety expected. Based on a comprehensive cost/benefit model, it is estimated for a large hospital (UIHC) to recover investment from implementation within two to three years, while smaller hospitals may need longer to realize ROI. More importantly, the study estimated that RFID technology could reduce morbidity and mortality effects substantially among patients receiving transfusions.

Improving construction site safety through leader-based verbal safety communication.

PubMed

Kines, Pete; Andersen, Lars P S; Spangenberg, Soren; Mikkelsen, Kim L; Dyreborg, Johnny; Zohar, Dov

2010-10-01

The construction industry is one of the most injury-prone industries, in which production is usually prioritized over safety in daily on-site communication. Workers have an informal and oral culture of risk, in which safety is rarely openly expressed. This paper tests the effect of increasing leader-based on-site verbal safety communication on the level of safety and safety climate at construction sites. A pre-post intervention-control design with five construction work gangs is carried out. Foremen in two intervention groups are coached and given bi-weekly feedback about their daily verbal safety communications with their workers. Foremen-worker verbal safety exchanges (experience sampling method, n=1,693 interviews), construction site safety level (correct vs. incorrect, n=22,077 single observations), and safety climate (seven dimensions, n=105 questionnaires) are measured over a period of up to 42 weeks. Baseline measurements in the two intervention and three control groups reveal that foremen speak with their workers several times a day. Workers perceive safety as part of their verbal communication with their foremen in only 6-16% of exchanges, and the levels of safety at the sites range from 70-87% (correct observations). Measurements from baseline to follow-up in the two intervention groups reveal that safety communication between foremen and workers increases significantly in one of the groups (factor 7.1 increase), and a significant yet smaller increase is found when the two intervention groups are combined (factor 4.6). Significant increases in the level of safety are seen in both intervention groups (7% and 12% increases, respectively), particularly in regards to 'access ways' and 'railings and coverings' (39% and 84% increases, respectively). Increases in safety climate are seen in only one of the intervention groups with respect to their 'attention to safety.' No significant trend changes are seen in the three control groups on any of the three measures

Work, Train, Win: Work-Based Learning Design and Management for Productivity Gains. OECD Education Working Papers, No. 135

ERIC Educational Resources Information Center

Kis, Viktoria

2016-01-01

Realising the potential of work-based learning schemes as a driver of productivity requires careful design and support. The length of work-based learning schemes should be adapted to the profile of productivity gains. A scheme that is too long for a given skill set might be unattractive for learners and waste public resources, but a scheme that is…

The effect of autoimmune blistering diseases on work productivity.

PubMed

Wang, E Q; Radjenovic, M; Castrillón, M A; Feng, G H Y; Murrell, D F

2018-05-06

Autoimmune blistering diseases (AIBD) are known to negatively impact upon quality of life (QoL); however, there is a paucity of research on the effect of AIBD on work productivity. AIBD can be quite disfiguring in terms of a patient's appearance due to their blistering nature. To determine the impact of AIBD on work productivity and to determine whether patients are stigmatized at work due to their appearance. Sixty-one patients with AIBD completed the Work Productivity and Activity Impairment Questionnaire-Specific Health Problem (WPAIQ-SHP), the Dermatology Life Quality Index (DLQI), the Autoimmune Bullous Disease Quality of Life (ABQOL) and the Treatment of Autoimmune Bullous Disease Quality of Life questionnaires (TABQOL). Non-responders to treatment had more work and activity impairment compared to responders. Worse WPAIQ-SHP scores were correlated with higher ABQOL, TABQOL and DLQI scores. Approximately 14.8% of subjects experienced stigmatization at work due to their appearance. The most common body areas stigmatized were easily visible sites, particularly the hands, arms and feet, with the majority of occurrences related to co-workers; for some patients, this stigmatization occurred on a daily basis. Loss of productivity at work was statistically much higher in those with higher disease severity, ABQOL & TABQOL scores and in non-responders to treatment. Autoimmune blistering diseases negatively impacts upon work productivity and activity. Stigmatization was common in the workplace which leads to increased stress, itself a stimulator of pemphigus. © 2018 European Academy of Dermatology and Venereology.

29 CFR 778.318 - Productive and nonproductive hours of work.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 3 2011-07-01 2011-07-01 false Productive and nonproductive hours of work. 778.318 Section... nonproductive hours of work. (a) Failure to pay for nonproductive time worked. Some agreements provide for payment only for the hours spent in productive work; the work hours spent in waiting time, time spent in...

Safety at work: a meta-analytic investigation of the link between job demands, job resources, burnout, engagement, and safety outcomes.

PubMed

Nahrgang, Jennifer D; Morgeson, Frederick P; Hofmann, David A

2011-01-01

In this article, we develop and meta-analytically test the relationship between job demands and resources and burnout, engagement, and safety outcomes in the workplace. In a meta-analysis of 203 independent samples (N = 186,440), we found support for a health impairment process and for a motivational process as mechanisms through which job demands and resources relate to safety outcomes. In particular, we found that job demands such as risks and hazards and complexity impair employees' health and positively relate to burnout. Likewise, we found support for job resources such as knowledge, autonomy, and a supportive environment motivating employees and positively relating to engagement. Job demands were found to hinder an employee with a negative relationship to engagement, whereas job resources were found to negatively relate to burnout. Finally, we found that burnout was negatively related to working safely but that engagement motivated employees and was positively related to working safely. Across industries, risks and hazards was the most consistent job demand and a supportive environment was the most consistent job resource in terms of explaining variance in burnout, engagement, and safety outcomes. The type of job demand that explained the most variance differed by industry, whereas a supportive environment remained consistent in explaining the most variance in all industries.

Countermeasures that work : a highway safety countermeasure guide for state highway safety offices

DOT National Transportation Integrated Search

2007-01-01

This guide is a basic reference to assist State Highway Safety Offices (SHSOs) in selecting : effective, science-based traffic safety countermeasures for major highway safety problem areas. : The guide describes major strategies and countermeasures t...

Countermeasures that work : a highway safety countermeasure guide for state highway safety offices

DOT National Transportation Integrated Search

2005-01-01

This guide is a basic reference to assist State Highway Safety Offices (SHSOs) in selecting effective, science-based traffic safety countermeasures for major highway safety problem areas. The guide: describes major strategies and countermeasures that...

Countermeasures that work : a highway safety countermeasure guide for state highway safety offices

DOT National Transportation Integrated Search

2009-01-01

This guide is a basic reference to assist State Highway Safety Offices (SHSOs) in selecting effective, science-based traffic safety countermeasures for major highway safety problem areas. The guide: describes major strategies and countermeasures that...

Countermeasures that work : a highway safety countermeasure guide for state highway safety offices

DOT National Transportation Integrated Search

2008-01-01

This guide is a basic reference to assist State Highway Safety Offices (SHSOs) in selecting effective, science-based traffic safety countermeasures for major highway safety problem areas. The guide: describes major strategies and countermeasures that...

Digital drug safety surveillance: monitoring pharmaceutical products in twitter.

PubMed

Freifeld, Clark C; Brownstein, John S; Menone, Christopher M; Bao, Wenjie; Filice, Ross; Kass-Hout, Taha; Dasgupta, Nabarun

2014-05-01

Traditional adverse event (AE) reporting systems have been slow in adapting to online AE reporting from patients, relying instead on gatekeepers, such as clinicians and drug safety groups, to verify each potential event. In the meantime, increasing numbers of patients have turned to social media to share their experiences with drugs, medical devices, and vaccines. The aim of the study was to evaluate the level of concordance between Twitter posts mentioning AE-like reactions and spontaneous reports received by a regulatory agency. We collected public English-language Twitter posts mentioning 23 medical products from 1 November 2012 through 31 May 2013. Data were filtered using a semi-automated process to identify posts with resemblance to AEs (Proto-AEs). A dictionary was developed to translate Internet vernacular to a standardized regulatory ontology for analysis (MedDRA(®)). Aggregated frequency of identified product-event pairs was then compared with data from the public FDA Adverse Event Reporting System (FAERS) by System Organ Class (SOC). Of the 6.9 million Twitter posts collected, 4,401 Proto-AEs were identified out of 60,000 examined. Automated, dictionary-based symptom classification had 86 % recall and 72 % precision [corrected]. Similar overall distribution profiles were observed, with Spearman rank correlation rho of 0.75 (p < 0.0001) between Proto-AEs reported in Twitter and FAERS by SOC. Patients reporting AEs on Twitter showed a range of sophistication when describing their experience. Despite the public availability of these data, their appropriate role in pharmacovigilance has not been established. Additional work is needed to improve data acquisition and automation.

Safety of stationary grinding machines - impact resistance of work zone enclosures.

PubMed

Mewes, Detlef; Adler, Christian

2017-09-01

Guards on machine tools are intended to protect persons from being injured by parts ejected with high kinetic energy from the work zone of the machine. Stationary grinding machines are a typical example. Generally such machines are provided with abrasive product guards closely enveloping the grinding wheel. However, many machining tasks do not allow the use of abrasive product guards. In such cases, the work zone enclosure has to be dimensioned so that, in case of failure, grinding wheel fragments remain inside the machine's working zone. To obtain data for the dimensioning of work zone enclosures on stationary grinding machines, which must be operated without an abrasive product guard, burst tests were conducted with vitrified grinding wheels. The studies show that, contrary to widely held opinion, narrower grinding wheels can be more critical concerning the impact resistance than wider wheels although their fragment energy is smaller.

The impact of nurse working hours on patient safety culture: a cross-national survey including Japan, the United States and Chinese Taiwan using the Hospital Survey on Patient Safety Culture.

PubMed

Wu, Yinghui; Fujita, Shigeru; Seto, Kanako; Ito, Shinya; Matsumoto, Kunichika; Huang, Chiu-Chin; Hasegawa, Tomonori

2013-10-07

A positive patient safety culture (PSC) is one of the most critical components to improve healthcare quality and safety. The Hospital Survey on Patient Safety Culture (HSOPS), developed by the US Agency for Healthcare Research and Quality, has been used to assess PSC in 31 countries. However, little is known about the impact of nurse working hours on PSC. We hypothesized that long nurse working hours would deteriorate PSC, and that the deterioration patterns would vary between countries. Moreover, the common trends observed in Japan, the US and Chinese Taiwan may be useful to improve PSC in other countries. The purpose of this study was to clarify the impact of long nurse working hours on PSC in Japan, the US, and Chinese Taiwan using HSOPS. The HSOPS questionnaire measures 12 sub-dimensions of PSC, with higher scores indicating a more positive PSC. Odds ratios (ORs) were calculated using a generalized linear mixed model to evaluate the impact of working hours on PSC outcome measures (patient safety grade and number of events reported). Tukey's test and Cohen's d values were used to verify the relationships between nurse working hours and the 12 sub-dimensions of PSC. Nurses working ≥60 h/week in Japan and the US had a significantly lower OR for patient safety grade than those working <40 h/week. In the three countries, nurses working ≥40 h/week had a significantly higher OR for the number of events reported. The mean score on 'staffing' was significantly lower in the ≥60-h group than in the <40-h group in all the three countries. The mean score for 'teamwork within units' was significantly lower in the ≥60-h group than in the <40-h group in Japan and Chinese Taiwan. Patient safety grade deteriorated and the number of events reported increased with long working hours. Among the 12 sub-dimensions of PSC, long working hours had an impact on 'staffing' and 'teamwork within units' in Japan, the US and Chinese Taiwan.

Researchers' Roles in Patient Safety Improvement.

PubMed

Pietikäinen, Elina; Reiman, Teemu; Heikkilä, Jouko; Macchi, Luigi

2016-03-01

In this article, we explore how researchers can contribute to patient safety improvement. We aim to expand the instrumental role researchers have often occupied in relation to patient safety improvement. We reflect on our own improvement model and experiences as patient safety researchers in an ongoing Finnish multi-actor innovation project through self-reflective narration. Our own patient safety improvement model can be described as systemic. Based on the purpose of the innovation project, our improvement model, and the improvement models of the other actors in the project, we have carried out a wide range of activities. Our activities can be summarized in 8 overlapping patient safety improvement roles: modeler, influencer, supplier, producer, ideator, reflector, facilitator, and negotiator. When working side by side with "practice," researchers are offered and engage in several different activities. The way researchers contribute to patient safety improvement and balance between different roles depends on the purpose of the study, as well as on the underlying patient safety improvement models. Different patient safety research paradigms seem to emphasize different improvement roles, and thus, they also face different challenges. Open reflection on the underlying improvement models and roles can help researchers with different backgrounds-as well as other actors involved in patient safety improvement-in structuring their work and collaborating productively.

Work-based Assessment and Co-production in Postgraduate Medical Training

PubMed Central

Holmboe, Eric S.

2017-01-01

Assessment has always been an essential component of postgraduate medical education and for many years focused predominantly on various types of examinations. While examinations of medical knowledge and more recently of clinical skills with standardized patients can assess learner capability in controlled settings and provide a level of assurance for the public, persistent and growing concerns regarding quality of care and patient safety worldwide has raised the importance and need for better work-based assessments. Work-based assessments, when done effectively, can more authentically capture the abilities of learners to actually provide safe, effective, patient-centered care. Furthermore, we have entered the era of interprofessional care where effective teamwork among multiple health care professionals is now paramount. Work-based assessment methods are now essential in an interprofessional healthcare world. To better prepare learners for these newer competencies and the ever-growing complexity of healthcare, many post-graduate medical education systems across the globe have turned to outcomes-based models of education, codified through competency frameworks. This commentary provides a brief overview on key methods of work-based assessment such as direct observation, multisource feedback, patient experience surveys and performance measures that are needed in a competency-based world that places a premium on educational and clinical outcomes. However, the full potential of work-based assessments will only be realized if post-graduate learners play an active role in their own assessment program. This will require a substantial culture change, and culture change only occurs through actions and changed behaviors. Co-production offers a practical and philosophical approach to engaging postgraduate learners to be active, intrinsically motivated agents for their own professional development, help to change learning culture and contribute to improving programmatic

Work-based Assessment and Co-production in Postgraduate Medical Training.

PubMed

Holmboe, Eric S

2017-01-01

Assessment has always been an essential component of postgraduate medical education and for many years focused predominantly on various types of examinations. While examinations of medical knowledge and more recently of clinical skills with standardized patients can assess learner capability in controlled settings and provide a level of assurance for the public, persistent and growing concerns regarding quality of care and patient safety worldwide has raised the importance and need for better work-based assessments. Work-based assessments, when done effectively, can more authentically capture the abilities of learners to actually provide safe, effective, patient-centered care. Furthermore, we have entered the era of interprofessional care where effective teamwork among multiple health care professionals is now paramount. Work-based assessment methods are now essential in an interprofessional healthcare world. To better prepare learners for these newer competencies and the ever-growing complexity of healthcare, many post-graduate medical education systems across the globe have turned to outcomes-based models of education, codified through competency frameworks. This commentary provides a brief overview on key methods of work-based assessment such as direct observation, multisource feedback, patient experience surveys and performance measures that are needed in a competency-based world that places a premium on educational and clinical outcomes. However, the full potential of work-based assessments will only be realized if post-graduate learners play an active role in their own assessment program. This will require a substantial culture change, and culture change only occurs through actions and changed behaviors. Co-production offers a practical and philosophical approach to engaging postgraduate learners to be active, intrinsically motivated agents for their own professional development, help to change learning culture and contribute to improving programmatic

Biological safety cabinetry.

PubMed Central

Kruse, R H; Puckett, W H; Richardson, J H

1991-01-01

The biological safety cabinet is the one piece of laboratory and pharmacy equipment that provides protection for personnel, the product, and the environment. Through the history of laboratory-acquired infections from the earliest published case to the emergence of hepatitis B and AIDS, the need for health care worker protection is described. A brief description with design, construction, function, and production capabilities is provided for class I and class III safety cabinets. The development of the high-efficiency particulate air filter provided the impetus for clean room technology, from which evolved the class II laminar flow biological safety cabinet. The clean room concept was advanced when the horizontal airflow clean bench was manufactured; it became popular in pharmacies for preparing intravenous solutions because the product was protected. However, as with infectious microorganisms and laboratory workers, individual sensitization to antibiotics and the advent of hazardous antineoplastic agents changed the thinking of pharmacists and nurses, and they began to use the class II safety cabinet to prevent adverse personnel reactions to the drugs. How the class II safety cabinet became the mainstay in laboratories and pharmacies is described, and insight is provided into the formulation of National Sanitation Foundation standard number 49 and its revisions. The working operations of a class II cabinet are described, as are the variations of the four types with regard to design, function, air velocity profiles, and the use of toxins. The main certification procedures are explained, with examples of improper or incorrect certifications. The required levels of containment for microorganisms are given. Instructions for decontaminating the class II biological safety cabinet of infectious agents are provided; unfortunately, there is no method for decontaminating the cabinet of antineoplastic agents. Images PMID:2070345

Assessment of Primary Production of Horticultural Safety Management Systems of Mushroom Farms in South Africa.

PubMed

Dzingirayi, Garikayi; Korsten, Lise

2016-07-01

Growing global consumer concern over food safety in the fresh produce industry requires producers to implement necessary quality assurance systems. Varying effectiveness has been noted in how countries and food companies interpret and implement food safety standards. A diagnostic instrument (DI) for global fresh produce industries was developed to measure the compliancy of companies with implemented food safety standards. The DI is made up of indicators and descriptive grids for context factors and control and assurance activities to measure food safety output. The instrument can be used in primary production to assess food safety performance. This study applied the DI to measure food safety standard compliancy of mushroom farming in South Africa. Ten farms representing almost half of the industry farms and more than 80% of production were independently assessed for their horticultural safety management system (HSMS) compliance via in-depth interviews with each farm's quality assurance personnel. The data were processed using Microsoft Office Excel 2010 and are represented in frequency tables. The diagnosis revealed that the mushroom farming industry had an average food safety output. The farms were implementing an average-toadvanced HSMS and operating in a medium-risk context. Insufficient performance areas in HSMSs included inadequate hazard analysis and analysis of control points, low specificity of pesticide assessment, and inadequate control of suppliers and incoming materials. Recommendations to the industry and current shortcomings are suggested for realization of an improved industry-wide food safety assurance system.

Dangerous Products, Dangerous Places: An AARP Report on Home Safety and Older Consumers.

ERIC Educational Resources Information Center

Fise, Mary Ellen R.

This report was written to identify the safety problems confronting older persons and to educate readers about product and home hazards and appropriate preventive measures. It was written for older consumers, their families, policymakers, and manufacturers. Information on the incidence of home accidents and consumer product accidents among the…

Measurement and standardization of eye safety for optical radiation of LED products

NASA Astrophysics Data System (ADS)

Mou, Tongsheng; Peng, Zhenjian

2013-06-01

The blue light hazard (BLH) to human eye's retina is now a new issue emerging in applications of artificial light sources. Especially for solid state lighting sources based on the blue chip-LED(GaN), the photons with their energy more than 2.4 eV show photochemical effects on the retina significantly, raising damage both in photoreceptors and retinal pigment epithelium. The photobiological safety of artificial light sources emitting optical radiation has gained more and more attention worldwide and addressed by international standards IEC 62471-2006(CIE S009/E: 2002). Meanwhile, it is involved in IEC safety specifications of LED lighting products and covered by European Directive 2006/25/EC on the minimum health and safety requirements regarding the exposure of the workers to artificial optical radiation. In practical applications of the safety standards, the measuring methods of optical radiation from LED products to eyes are important in establishment of executable methods in the industry. In 2011, a new project to develop the international standard of IEC TR62471-4,that is "Measuring methods of optical radiation related to photobiological safety", was approved and are now under way. This paper presents the concerned methods for the assessment of optical radiation hazards in the standards. Furthermore, a retina radiance meter simulating eye's optical geometry is also described, which is a potential tool for blue light hazard assessment of retinal exposure to optical radiation. The spectroradiometric method integrated with charge-coupled device(CCD) imaging system is introduced to provide more reliable results.

The effect of leader communication style on safety-conscious work environments at domestic nuclear power plants

NASA Astrophysics Data System (ADS)

Goldberg, Edward Michael

Public risk from unsafe nuclear power plant operations increases when plant workers are reluctant to raise issues and concerns. The effect of leader communication style on the safety-conscious work environment (SCWE) at domestic nuclear power plants was evaluated using a descriptive quantitative research study. A sample of 379 plant employees was surveyed to determine leader communication style elements that foster SCWE. The results reveal that leader communication style significantly affects a safety-conscious work environment. Specific attributes such as wit, articulation, self-disclosure, and social composure, confirmation, and experience, were proven to directly affect worker's likelihood to raise issues and concerns. The direct effect of leader, communication style on safe plant operations and the communication actions leaders can take to improve the safety of those operations is discussed.

30 CFR 250.804 - Production safety-system testing and records.

Code of Federal Regulations, 2010 CFR

2010-07-01

... OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Production Safety... minute or a gas leakage rate in excess of 5 cubic feet per minute is observed, the device shall be... cubic centimeters per minute or a gas leakage rate in excess of 5 cubic feet per minute is observed, the...

Communication breakdown: How working teens' perceptions of their supervisors impact safety and injury.

PubMed

Zierold, Kristina M; McGeeney, Teresa J

2016-04-07

Every nine minutes a young worker is injured on the job. Adult supervision is recommended to prevent injury among teen workers, yet limited research exists on supervision or the supervisor-teen relationship. The objectives of this study were to: (a) explore teens' perceptions of supervision and supervisors, (b) characterize teen-supervisor communication, and (c) investigate the role of communication in injury and workplace safety. In spring 2010, focus groups and interviews were conducted with working teenagers, 15-19 years old. Fifty-two percent of teens were injured at work and most did not report their injuries to their supervisors. The majority of teenagers perceived supervision as "being watched" to make sure you are "staying on task." Teens viewed their supervisors as uninterested and uncaring, which greatly impacted communication. As one 15-year old female who was severely burned stated: "they don't care." Self-blame after teens sustained an injury further complicated the teen-supervisor relationship and communication. Working teenagers have complicated relationships with their supervisors. Many liked their supervisors, but felt their supervisors were apathetic towards them. Supervisors who engage teens in a mentoring relationship may be successful in resolving uncomfortable power dynamics which may increase communication and; therefore, safety for working teens.

A risk-based, product-level approach for assuring aquatic environmental safety of cleaning products in the context of sustainability: The Environmental Safety Check (ESC) scheme of the A.I.S.E. Charter for Sustainable Cleaning.

PubMed

Pickup, John Alexander; Dewaele, Joost; Furmanski, Nicola L; Kowalczyk, Agnieszka; Luijkx, Gerard Ca; Mathieu, Sophie; Stelter, Norbert

2017-01-01

Cleaning products have long been a focus of efforts to improve sustainability and assure safety for the aquatic environment when disposed of after use. The latter is addressed at ingredient level through environmental risk assessment, including in formal frameworks such as REACH. Nevertheless, in the context of programs to improve overall sustainability, stakeholders demand both environmental safety assurance and progress at product level. Current product-level approaches for aquatic toxicity (e.g., USEtox™, Critical Dilution Volume) can be seen as predominantly hazard-based. The more logical approach would be risk-based, because ecotoxicity is generally threshold-dependent and hazard-based assessment produces conflicts with risk-based learnings. The development of a risk-based approach to assess formulated products is described: the International Association for Soaps, Detergents and Maintenance Products (A.I.S.E.) Charter Environmental Safety Check (ESC), which is consistent with the scientific principles underlying REACH. This is implemented through a simple spreadsheet tool and internal database of ingredient parameters including predicted no-effect concentration (PNEC) and removal rate. A novel feature is applying market volume information for both product types and ingredients to permit a risk-based calculation. To pass the ESC check, the projected environmental safety ratio (PESR) for each ingredient as formulated and dosed (unless cleared by a published risk assessment or exempted as inherently low risk) must be less than 1. The advantages of a risk-based approach are discussed. The strengths and limitations of various possible approaches to standard-setting, product-ranking and driving continuous improvement in respect of potential ecotoxic impacts on the aquatic environment are considered. It is proposed that as ecotoxicity is generally accepted to be threshold-dependent, with no effect below the threshold, the most constructive approach to continuous

Agency perspectives on food safety for the products of animal biotechnology.

PubMed

Howard, H J; Jones, K M; Rudenko, L

2012-08-01

Animal biotechnology represents one subset of tools among a larger set of technologies for potential use to meet increasing world demands for food. Assisted reproductive technologies (ART) such as artificial insemination and embryo transfer continue to make positive contributions in food animal production. The US Food and Drug Administration (FDA) performed a comprehensive risk assessment to identify potential food consumption or animal health risks associated with animal cloning, an emerging ART. At that time, FDA concluded that animal cloning posed no unique risks either to animal health or to food consumption, and food from animal clones and their sexually reproduced offspring required no additional federal regulation beyond that applicable to conventionally bred animals of the species examined. At this time, no new information has arisen that would necessitate a change in FDA's conclusions on food from animal clones or their sexually reproduced offspring. Use of recombinant DNA technologies to produce genetically engineered (GE) animals represents another emerging technology with potential to impact food animal production. In its regulation of GE animals, FDA follows a cumulative, risk-based approach to address scientific questions related to the GE animals. FDA evaluates data and information on the safety, effectiveness and stability of the GE event. FDA carries out its review at several levels (e.g. molecular biology, animal safety, food safety, environmental safety and claim validation). GE animal sponsors provide data to address risk questions for each level. This manuscript discusses FDA's role in evaluation of animal cloning and GE animals. © 2012 Blackwell Verlag GmbH.

The Quality and Food Safety of Dry Smoke Garfish (Hemirhamphus far) Product From Maluku

NASA Astrophysics Data System (ADS)

Marthina Tapotubun, Alfonsina; Reiuwpassa, Fredrik; Apituley, Yolanda M. T. N.; Nanlohy, Hellen; Matrutty, Theodora E. A. A.

2017-10-01

Dry garfish is product of smoked process of “ikan julung” (Hemirhamphus far) and slowly the product getting dry, stiff and its colour become gold yellow-brown. The aim of this study is to find out quality and food safety of dry smoked “julung” from Maluku. The sample of this study is taken from production Keffing village, East Seram Regency, Maluku. Parameters to be analyzed are degrees of protein, fat, water, ash, TPC, Escherichia coli, Salmonella, Vibrio and total Staphylococcus aureus used standard analysis method for proximate (AOAC. 2005), sensosy parameters (BSN.2009) and food safety (BSN. 2006). Spreadsheet Ms Excel (Microsoft Inc., USA) is used for data processing; data is being analyzed descriptively to be interpreted in the research report. Dry smoked “julung” Keffing village, Maluku meet the good quality and food safety, that are ingredient degrees of water content 12.43%, protein 61.55%, fat 12.58%, ash 9.3%, TPC [6,8] × 101 CFU, total Staphylococcus sp [1,7] × 102, total E.coli 6.4 APM/g. and negatively for Salmonella and Vibrio.

Strategies to reduce safety violations for working from heights in construction companies: study protocol for a randomized controlled trial.

PubMed

van der Molen, Henk F; Frings-Dresen, Monique H W

2014-05-31

Safety measures should be applied to reduce work-related fatal and non-fatal fall injuries. However, according to the labor inspectorate, more than 80% of Dutch construction sites violate safety regulations for working from heights. To increase compliance with safety regulations, employers and workers have to select, implement and monitor safety measures. To facilitate this behavioral change, stimulating knowledge awareness and personalized feedback are frequently advocated behavior change techniques. For this study, two behavior change strategies have been developed in addition to the announcement of safety inspections by the labor inspectorate. These strategies consist of 1) face-to-face contacts with safety consultants and 2) direct mail with access to internet facilities. The objective of this study is to evaluate the effectiveness of these two strategies on the safety violations for working from heights, the process and the cost measures. This study is a block randomized intervention trial in 27 cities to establish the effects of the face-to-face guidance strategy (N = 9), a direct mailing strategy (N = 9) and a control condition of no guidance (N = 9) on safety violations to record by labor inspectors after three months. A process evaluation for both strategies will be performed to determine program implementation (reach, dose delivered and dose received), satisfaction, knowledge and perceived safety behavior. A cost analysis will be performed to establish the financial costs for both strategies. The present study is in accordance with the CONSORT statement. This study increases insight into performing practice-based randomized controlled trials. The outcome will help to evaluate the effect of two guidance strategies on safety violations. If these strategies are effective, implementation of these strategies through the national institute of safety and health or labor inspectorate can take place to guide construction companies in complying with

77 FR 35747 - Highway Safety Programs; Conforming Products List of Evidential Breath Alcohol Measurement Devices

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-14

...-0061] Highway Safety Programs; Conforming Products List of Evidential Breath Alcohol Measurement... Evidential Breath Alcohol Measurement Devices dated, September 17, 1993 (58 FR 48705). DATES: Effective Date... Safety Administration (NHTSA) published the Standards for Devices to Measure Breath Alcohol (38 FR 30459...

Evaluation of Electrical Characteristics of Protective Equipment - a Prerequisite for Ensuring Safety and Health of Workers at Work

NASA Astrophysics Data System (ADS)

Buică, G.; Beiu, C.; Antonov, A.; Dobra, R.; Păsculescu, D.

2017-06-01

The protecting electrical equipment in use are subject to various factors generated by the use, maintenance, storage and working environment, which may change the characteristics of protection against electric shock. The study presents the results of research on the behaviour over time of protective characteristics of insulating covers of material of work equipment in use, in order to determine the type and periodicity of safety tests. There were tested and evaluated safety equipment with plastic and insulating rubber covers used in operations of verifying functionality, safety and maintenance of machinery used in manufacturing industries and specific services from electric, energy and food sector.

Safety Harness For Work Under Suspended Load

NASA Technical Reports Server (NTRS)

Sunoo, Su Young

1994-01-01

Safety device protects worker under suspended engine or other heavy load. Mechanically linked with load so if load should fall, worker yanked safely away. Worker wears chest-plate vest with straps crossing eye on back. Lower safety cable connected to eye extends horizontally away from worker to nearby wall, wrapped on pulley and extends upward to motion amplifier or reducer. Safety cables transform any sudden downward motion of overhanging load into rapid sideways motion of worker. Net catches worker, preventing worker from bumping against wall.

Impact of overactive bladder on work productivity.

PubMed

Coyne, Karin S; Sexton, Chris C; Thompson, Christine L; Clemens, J Quentin; Chen, Chieh I; Bavendam, Tamara; Dmochowski, Roger

2012-07-01

To evaluate the impact of overactive bladder (OAB) on work productivity in a large, population-based study in the United States, with an overrepresentation of minorities. This cross-sectional, Internet-based survey was conducted among men and women aged 18-70. The lower urinary tract symptoms (LUTS) tool was used to assess symptoms over past 4 weeks. OAB was defined by urinary urgency of at least "sometimes" and/or urgency urinary incontinence (UUI). Outcomes included work status, Work Productivity and Activity Impairment Questionnaire--General Health (WPAI-GH) and Specific Health (WPAI-SH), and questions about the impact of urinary symptoms on work. Descriptive statistics were used to evaluate group differences (no/minimal symptoms [NMS] vs OAB). Logistic regressions evaluated predictors of unemployment status controlling for comorbid conditions, risk factors, and demographic variables. The response rate was 57%. A total of 5795 men and women were included in the analysis (OAB, 2323; NMS, 3472). OAB cases were significantly more likely to be unemployed (men, 44%; women, 54%) compared to those with NMS (men, 24%; women, 41%). Mean work productivity and activity impairment (WPAI) percent impairment while working was as follows: 19% and 21% among men and women with OAB; NMS, 4% and 7%. Significant differences were found for all urinary-specific WPAI-SHP items and other condition-specific outcomes. Men with OAB were 1.5 times more likely to be unemployed as compared to those with NMS when covariates were controlled for, whereas the association between OAB and unemployment in multivariate analysis was nonsignificant among women. Comparison with other outcomes suggests that OAB impairs work at levels comparable to other serious chronic conditions, including rheumatoid arthritis and asthma. Copyright © 2012 Elsevier Inc. All rights reserved.

Safety inspection of plant products

USDA-ARS?s Scientific Manuscript database

Advances in hyperspectral imaging technology have provided enormous opportunity for the food industry and research community to develop rapid and non-invasive inspection methods for food safety inspection. This chapter reviews and discusses different aspects of using this technology in safety inspec...

Working Safely at Some Times and Unsafely at Others: A Typology and Within-Person Process Model of Safety-Related Work Behaviors.

PubMed

Beus, Jeremy M; Taylor, William D

2017-06-22

Why do individuals choose to work safely in some instances and unsafely in others? Though this inherently within-person question is straightforward, the preponderance of between-person theory and research in the workplace safety literature is not equipped to answer it. Additionally, the limited way in which safety-related behaviors tend to be conceptualized further restricts understanding of why individuals vary in their safety-related actions. We use a goal-focused approach to conceptually address this question of behavioral variability and contribute to workplace safety research in 2 key ways. First, we establish an updated typology of safety-related behaviors that differentiates behaviors based on goal choice (i.e., safe vs. unsafe behaviors), goal-directedness (i.e., intentional vs. unintentional behaviors), and the means of goal pursuit (i.e., commission vs. omission and promotion vs. prevention-focused behaviors). Second, using an expectancy-value theoretical framework to explain variance in goal choice, we establish within-person propositions stating that safety-related goal choice and subsequent behaviors are a function of the target of safety-related behaviors, the instrumentality and resource requirement of behaviors, and the perceived severity, likelihood, and immediacy of the threats associated with behaviors. Taken together, we define what safety-related behaviors are, explain how they differ, and offer propositions concerning when and why they may vary within-persons. We explore potential between-person moderators of our theoretical propositions and discuss the practical implications of our typology and process model of safety-related behavior. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Promoting job safety for workers with intellectual disabilities: the staying safe at work training curriculum.

PubMed

Dewey, Robin

2011-01-01

In the United States, approximately 125,000 people with disabilities are employed through Community Rehabilitation Programs in manufacturing, assembly, and service jobs. These jobs have significant hazards and, consequently, the workers are at risk of injury. Training that empowers workers to participate in prevention efforts can help reduce work-related injuries. In general this kind of health and safety training in the United States is limited. It is even more so for workers with intellectual disabilities, in part because there have not been programs for teaching individuals with cognitive challenges health and safety skills, adapted to their learning needs. This paper describes the development and promotion of the Staying Safe at Work curriculum of UC Berkeley's Labor Occupational Health Program, which is designed for use by support agencies and employers of workers with intellectual disabilities. The goal of this program is to teach these workers essential occupational safety and health skills in a manner they can understand.

Work productivity improvement after acid suppression in patients with uninvestigated dyspepsia.

PubMed

Bytzer, Peter; Langkilde, Lars K; Christensen, Erik; Meineche-Schmidt, Villy

2012-07-01

Lost productivity accounts for a significant part of the costs caused by gastrointestinal symptoms. We aimed to describe selfreported productivity in patients presenting with dyspepsia. Data were sourced from a randomized, double-blinded study of two weeks of esomeprazole 40 mg or placebo in 805 primary-care patients with uninvestigated dyspepsia. Work productivity was tested using the Work Productivity and Activity Impairment questionnaire. Treatment effect on work productivity loss was tested according to the likelihood of treatment response. A total of 401/805 employed patients were included in the analysis. The average work productivity loss in the past seven days was 10.5 working hours/week. The productivity loss grew with increasing severity of symptoms at baseline. Following two weeks of treatment, the mean improvement in work productivity was significantly higher for both absenteeism (1 hour versus 0.1 hour, p < 0.05) and presenteeism (5.3 hours versus 4.3 hours, p < 0.05) in patients treated with esomeprazole versus placebo. The most substantial improvement was seen in patients who, based on baseline symptoms, were assessed to be likely treatment responders. Dyspepsia symptoms represent a significant economic burden in terms of lost productivity. The RESPONSE algorithm is successful in determining which patients will benefit from acid suppression in terms of enhanced productivity.

Influence of indoor work environments on health, safety, and human rights among migrant sex workers at the Guatemala-Mexico Border: a call for occupational health and safety interventions.

PubMed

Goldenberg, Shira M; Rocha Jiménez, Teresita; Brouwer, Kimberly C; Morales Miranda, Sonia; Silverman, Jay G

2018-02-02

Migrant women are over-represented in the sex industry, and migrant sex workers experience disproportionate health inequities, including those related to health access, HIV and sexually transmitted infections (STIs), and violence. Despite calls for occupational sex work interventions situated in labour rights frameworks, there remains a paucity of evidence pertaining to migrant sex workers' needs and realities, particularly within Mexico and Central America. This study investigated migrant sex workers' narratives regarding the ways in which structural features of work environments shape vulnerability and agency related to HIV/STI prevention and violence at the Guatemala-Mexico border. Drawing on theoretical perspectives on risk environments and structural determinants of HIV in sex work, we analyzed in-depth interviews, focus groups, and ethnographic fieldwork conducted with 39 migrant sex workers in indoor work environments between 2012 and 2015 in Tecún Umán, Guatemala. Participant narratives revealed the following intersecting themes to be most closely linked to safety and agency to engage in HIV/STI prevention: physical features of indoor work environments (e.g., physical layout of venue, proximity to peers and third parties); social norms and practices for alcohol use within the workplace; the existence and nature of management practices and policies on health and safety practices; and economic influences relating to control over earnings and clients. Across work environments, health and safety were greatly shaped by human rights concerns stemming from workplace interactions with police, immigration authorities, and health authorities. Physical isolation, establishment norms promoting alcohol use, restricted economic agency, and human rights violations related to sex work policies and immigration enforcement were found to exacerbate risks. However, some establishment policies and practices promoted 'enabling environments' for health and safety, supporting

Increased Capacity for Work and Productivity After Breast Reduction.

PubMed

Cabral, Isaias Vieira; Garcia, Edgard da Silva; Sobrinho, Rebecca Neponucena; Pinto, Natália Lana Larcher; Juliano, Yara; Veiga-Filho, Joel; Ferreira, Lydia Masako; Veiga, Daniela Francescato

2017-01-01

Breast hypertrophy is a prevalent condition among women worldwide, which can affect different aspects of their quality of life. The physical and emotional impact of breast hypertrophy may harm daily activities, including work. To assess the impact of reduction mammaplasty on the ability to work and productivity of women with breast hypertrophy. A total of 60 patients with breast hypertrophy, already scheduled for breast reduction, aged 18 to 60 years and who had formal or autonomous employment were prospectively enrolled. The Brazilian versions of two validated tools, Work Productivity and Activity Impairment - General Health (WPAI-GH) and Work Limitations Questionnaire (WLQ) were self-administered at the preoperative evaluation and six months following surgery. The median age was 33 years, median body mass index was 24 kg/m 2 , and the median total weight of resected breast tissue was 617.5 g. According to the Brazilian classification of occupation, most patients (53%) had technical, scientific, artistic and similar occupations. There was a significant improvement in work capacity and productivity six months after the reduction mammaplasty, denoted by a decrease in presenteeism, absenteeism, and WLQ Productivity Loss Score (Wilcoxon analysis of variance: P < .0001 for each of these domains). Reduction mammaplasty increases the work capacity and productivity of Brazilian women with breast hypertrophy. LEVEL OF EVIDENCE 4. © 2016 The American Society for Aesthetic Plastic Surgery, Inc. Reprints and permission: journals.permissions@oup.com.

Work productivity in rheumatoid arthritis: relationship with clinical and radiological features.

PubMed

Chaparro Del Moral, Rafael; Rillo, Oscar Luis; Casalla, Luciana; Morón, Carolina Bru; Citera, Gustavo; Cocco, José A Maldonado; Correa, María de Los Ángeles; Buschiazzo, Emilio; Tamborenea, Natalia; Mysler, Eduardo; Tate, Guillermo; Baños, Andrea; Herscovich, Natalia

2012-01-01

Objective. To assess the relationship between work productivity with disease activity, functional capacity, life quality and radiological damage in patients with rheumatoid arthritis (RA). Methods. The study included consecutive employed patients with RA (ACR'87), aged over 18. Demographic, disease-related, and work-related variables were determined. The reduction of work productivity was assessed by WPAI-RA. Results. 90 patients were evaluated, 71% women. Age average is 50 years old, DAS28 4, and RAQoL 12. Median SENS is 18 and HAQ-A 0.87. Mean absenteeism was of 14%, presenting an average of 6.30 work hours wasted weekly. The reduction in performance at work or assistance was of 38.4% and the waste of productivity was of 45%. Assistance correlated with DAS28 (r = 0.446; P < 0.001), HAQ-A (r = 0.545; P < 0.001) and RAQoL (r = 0.475; P < 0.001). Lower total productivity was noticed in higher levels of activity and functional disability. Patients with SENS > 18 showed lower work productivity than those with SENS < 18 (50 versus 34; P = 0.04). In multiple regression analysis, variables associated with reduction of total work productivity were HAQ-A and RAQoL. Conclusion. RA patients with higher disease severity showed higher work productivity compromise.

Work Productivity in Rheumatoid Arthritis: Relationship with Clinical and Radiological Features

PubMed Central

Chaparro del Moral, Rafael; Rillo, Oscar Luis; Casalla, Luciana; Morón, Carolina Bru; Citera, Gustavo; Cocco, José A. Maldonado; Correa, María de los Ángeles; Buschiazzo, Emilio; Tamborenea, Natalia; Mysler, Eduardo; Tate, Guillermo; Baños, Andrea; Herscovich, Natalia

2012-01-01

Objective. To assess the relationship between work productivity with disease activity, functional capacity, life quality and radiological damage in patients with rheumatoid arthritis (RA). Methods. The study included consecutive employed patients with RA (ACR'87), aged over 18. Demographic, disease-related, and work-related variables were determined. The reduction of work productivity was assessed by WPAI-RA. Results. 90 patients were evaluated, 71% women. Age average is 50 years old, DAS28 4, and RAQoL 12. Median SENS is 18 and HAQ-A 0.87. Mean absenteeism was of 14%, presenting an average of 6.30 work hours wasted weekly. The reduction in performance at work or assistance was of 38.4% and the waste of productivity was of 45%. Assistance correlated with DAS28 (r = 0.446; P < 0.001), HAQ-A (r = 0.545; P < 0.001) and RAQoL (r = 0.475; P < 0.001). Lower total productivity was noticed in higher levels of activity and functional disability. Patients with SENS > 18 showed lower work productivity than those with SENS < 18 (50 versus 34; P = 0.04). In multiple regression analysis, variables associated with reduction of total work productivity were HAQ-A and RAQoL. Conclusion. RA patients with higher disease severity showed higher work productivity compromise. PMID:23320166