Sample records for salud atribuibles al

  1. Manténgase saludable al elegir pescado y mariscos de manera inteligente

    EPA Pesticide Factsheets

    Los pescados y mariscos son una parte importante de una dieta saludable. Algunos pescados y mariscos pueden contener sustancias químicas que presenten un riesgo para la salud. Información sobre el consumo seguro de pescado y mariscos.

  2. FACTORES SOCIO-ESTRUCTURALES Y EL ESTIGMA HACIA EL VIH/SIDA: EXPERIENCIAS DE PUERTORRIQUEÑOS/AS CON VIH/SIDA AL ACCEDER SERVICIOS DE SALUD

    PubMed Central

    RIVERA-DIAZ, MARINILDA; VARAS-DIAZ, NELSON; REYES-ESTRADA, MARCOS; SURO, BEATRIZ; CORIANO, DORALIS

    2013-01-01

    RESUMEN El estigma relacionado al VIH/SIDA continúa afectando la prestación de servicios de salud y el bienestar físico y mental de las personas con VIH/SIDA (PVS). Recientemente la literatura científica ha señalado la importancia de comprender las manifestaciones de estigma más allá de las interacciones individuales. Por tal razón, investigaciones recientes en y fuera de Puerto Rico enfatizan la importancia de entender cómo factores socio-estructurales (FSE) influyen en los procesos de estigmatización social. Con el propósito de examinar los FSE que influyen en las manifestaciones de estigma relacionado al VIH/SIDA, realizamos y analizamos nueve grupos focales compuestos por hombres y mujeres en tratamiento para el VIH/SIDA que habían tenido experiencias estigmatizantes. Los participantes identificaron FSE relacionados a las manifestaciones de estigma, tales como el uso de viviendas especializadas, descentralización de los servicios de salud y el desarrollo de protocolos administrativos excluyentes en los servicios de salud. Los resultados demuestran la importancia de considerar los FSE en el desarrollo e implementación de intervenciones dirigidas a la población. PMID:24639599

  3. Los incendios y su salud

    EPA Pesticide Factsheets

    El humo de los incendios puede tener un efecto adverso en la salud de las personas, especialmente en aquellas que padecen de enfermedades cardíacas y pulmonares. Vea cómo minimizar su exposición al humo.

  4. Efectos del material particulado (PM) sobre la salud y el medioambiente

    EPA Pesticide Factsheets

    El tamaño de las partículas se encuentra directamente vinculado con el potencial para provocar problemas de salud. La exposición a estas partículas puede afectar tanto a los pulmones como al corazón. También afectan el medioambiente.

  5. Obstáculos a la adherencia y retención en los sistemas de salud público y privado según pacientes y personal de salud

    PubMed Central

    Arístegui, Inés; Dorigo, Analía; Bofill, Lina; Bordatto, Alejandra; Lucas, Mar; Cabanillas, Graciela Fernández; Sued, Omar; Cahn, Pedro; Cassetti, Isabel; Weiss, Stephen; Jones., Deborah

    2016-01-01

    Resumen Introducción el Programa Nacional de Sida garantiza el acceso universal a los antirretrovirales, aun así las personas que reciben medicamentos a través del sistema público no logran obtener una carga viral indetectable en la misma proporción que los pacientes del sistema privado. Este estudio cualitativo tiene como objeto identificar los factores asociados a la adherencia y retención en la cascada de atención de VIH de los sistemas de salud público y privado de Buenos Aires, según las percepciones de pacientes y del personal de salud. Métodos se registraron datos cualitativos de 12 entrevistas semi-estructuradas a informantes clave y 4 grupos focales de pacientes y personal de salud tanto del sistema público como privado. Se codificaron y analizaron temas predeterminados sobre adherencia, utilizando el software QRS Nvivo9® de análisis de datos cualitativos. Resultados pacientes y personal de salud de ambos sistemas coinciden en la importancia del estigma asociado al VIH, la relación médicopaciente, la comunicación entre ambos y la división de responsabilidades en relación al tratamiento como aspectos fundamentales para la adherencia y retención en la cascada de atención. Se observan diferencias entre los sistemas en la forma en que algunos de estos aspectos actúan. Las barreras estructurales se presentan como principales obstáculos del sistema público. Discusión se resalta la necesidad de intervenciones focalizadas en la díada médico-paciente que considere las particularidades de cada sistema de atención para facilitar el compromiso del paciente en la adherencia. PMID:26878024

  6. Explicación de las disparidades raciales en la salud neonatal en Brasil*

    PubMed Central

    Nyarko, Kwame A.; López-Camelo, Jorge; Castilla, Eduardo E.; Wehby, George L.

    2015-01-01

    Objetivos. Buscamos cuantificar la manera en que los efectos socioeconómicos, demográficos, geográficos y de atención de salud explican las disparidades raciales en las tasas de bajo peso al nacer y prematuridad en Brasil. Métodos. Utilizamos una muestra de 8 949 niños nacidos entre 1995 y el 2009 en 15 ciudades y 7 provincias de Brasil. Nos centramos en las disparidades en la prevalencia de bajo peso al nacer (< 2 500 g) y prematuridad (< 37 semanas de gestación) en recién nacidos de ascendencia solo africana o mezclada con otras ascendencias y de ascendencia solo europea. Usamos un modelo de descomposición para cuantificar la contribución de los factores conceptualmente pertinentes a esas disparidades. Resultados. El modelo permitió explicar entre 45% y 94% de las disparidades en cuanto al bajo peso al nacer y entre 64% y 94% de las disparidades en cuanto a la prematuridad entre los grupos de ascendencia africana y de ascendencia europea. Las diferencias en el uso de atención prenatal y en la ubicación geográfica fueron los factores más importantes, seguidos por las diferencias socioeconómicas. El modelo permitió explicar la mayoría de las disparidades en los recién nacidos de ascendencia africana mezclada y parte de las disparidades en los de ascendencia solo africana. Conclusiones. En las políticas públicas para mejorar la salud infantil se deben abordar las diferencias en cuanto a la atención prenatal y la ubicación geográfica a fin de reducir las disparidades en materia de salud entre los recién nacidos de ascendencia africana y los de ascendencia europea en Brasil.

  7. Translation and adaptation of the Competencias Esenciales en Salud Pública para los recursos humanos en salud.

    PubMed

    Almeida, Maria de Lourdes de; Peres, Aida Maris; Ferreira, Maria Manuela Frederico; Mantovani, Maria de Fátima

    2017-06-05

    ática da atenção à saúde pública/coletiva no Brasil. realizar la traducción y adaptación cultural del Marco Regional de Competencias Esenciales en Salud Pública para los Recursos Humanos en Salud de la Región de las Américas, del español para el idioma portugués de Brasil. investigación metodológica, que siguió las fases: autorización para traducción; traducción inicial; síntesis de las traducciones y consenso; y, retrotraducción y composición de un comité de especialistas. en la traducción de los nombres de los dominios, no hubo diferencia en 66,7 % (N=4); en la traducción de la descripción de los dominios y de las competencias ocurrieron divergencias en 100 % de estos (N=6, N=56), se obtuvo consenso arriba de 80%, durante la traducción y perfeccionamiento, en el comité de especialistas, en la alteración de palabras y expresiones para aproximar los significados al contexto brasileño. el documento traducido y adaptado posee potencial de aplicación en investigaciones y de utilización en la práctica de la atención a la salud pública/colectiva en Brasil.

  8. Back Cover: NIH MedlinePlus Salud

    MedlinePlus

    ... page please turn Javascript on. ¡A su salud! Los Institutos Nacionales de la Salud (NIH, por sus ... Amigos de la Biblioteca Nacional de Medicina de los Estados Unidos y la Alianza Nacional para la ...

  9. Disparidad en Salud: Un Fenómeno Multidimensional

    PubMed Central

    Urrutia, Maria-Teresa; Cianelli, Rosina

    2012-01-01

    La Disparidad en Salud (DS) ha llamado la atención pública desde el siglo pasado, ha sido analizada desde diversas perspectivas y enfoques incluso variados términos han sido utilizados como sinónimos pudiendo llevar a confusión e inequidades al momento de su operacionalización. Sin embargo es importante señalar que las publicaciones coinciden en que la DS es uno de las determinantes esenciales a considerar al momento de definir polĺticas públicas. El propósito de esta publicación es analizar la disparidad en salud incorporando; a) los aspectos claves de su conceptualización, b) la evolución histórica del concepto, c) las estrategias que se han generado para enfrentarla, d) los factores considerados determinantes, y e) los aspectos éticos y la contribución de la investigación en la disminución de la DS. Health Disparities (HD) have been at the center of public attention for the past century. They have been analyzed from diverse perspectives utilizing various terms as synonyms that can lead to confusion and inequality at the moment of operationalization. Despite this, it is important to indicate that publications agree that HD are essential determinants that must be considered in the definition of public policy. The objective of this publication is to analyze health disparities incorporating; (a) key aspects in their conceptualization, (b) the historic evolution of the concept, (c) strategies that have been generated to confront them, (d) determining factors, and (e) ethical aspects and the contribution of research in decreasing HD. PMID:22581053

  10. Disparidad en Salud: Un Fenómeno Multidimensional.

    PubMed

    Urrutia, Maria-Teresa; Cianelli, Rosina

    2010-03-01

    La Disparidad en Salud (DS) ha llamado la atención pública desde el siglo pasado, ha sido analizada desde diversas perspectivas y enfoques incluso variados términos han sido utilizados como sinónimos pudiendo llevar a confusión e inequidades al momento de su operacionalización. Sin embargo es importante señalar que las publicaciones coinciden en que la DS es uno de las determinantes esenciales a considerar al momento de definir polĺticas públicas. El propósito de esta publicación es analizar la disparidad en salud incorporando; a) los aspectos claves de su conceptualización, b) la evolución histórica del concepto, c) las estrategias que se han generado para enfrentarla, d) los factores considerados determinantes, y e) los aspectos éticos y la contribución de la investigación en la disminución de la DS.Health Disparities (HD) have been at the center of public attention for the past century. They have been analyzed from diverse perspectives utilizing various terms as synonyms that can lead to confusion and inequality at the moment of operationalization. Despite this, it is important to indicate that publications agree that HD are essential determinants that must be considered in the definition of public policy. The objective of this publication is to analyze health disparities incorporating; (a) key aspects in their conceptualization, (b) the historic evolution of the concept, (c) strategies that have been generated to confront them, (d) determining factors, and (e) ethical aspects and the contribution of research in decreasing HD.

  11. Home | Departamento de Salud de Puerto Rico

    Science.gov Websites

    Publicaciones Registros Suicidio Tuberculosis Centro de Aprendizaje Virtual sobre temas de Preparación en Salud Tuberculosis Centro de Aprendizaje Virtual sobre temas de Preparación en Salud Pública Informe de Casos de Departamento de Salud Search... Search It looks like your browser does not have JavaScript enabled

  12. El contexto de la familia y el vecindario en la salud de los ancianos del estudio EPESE hispano

    PubMed Central

    Reyes-Ortiz, Carlos A.; Camacho, María E.; Eschbach, Karl; Markides, Kyriakos S.

    2014-01-01

    RESUMEN En este artículo se discute el papel de la familia y el vecindario en la salud de los ancianos méjico-americanos del estudio EPESE (Established Populations for Epidemiologic Studies of the Elderly) hispano. La paradoja epidemiológica consiste en que, a pesar de estar en desventaja socioeconómica, los ancianos hispanos tienen mortalidad relativamente menor que los ancianos de raza blanca. Esto es especialmente cierto cuando el anciano vive en los vecindarios donde hay un porcentaje alto de méjico-americanos. La familia también juega un papel importante en estos ancianos al disminuir el riesgo de institucionalización o de morbilidad. Asimismo, el estrés originado en problemas económicos o al depender económicamente de la familia, habiendo inmigrado en edades tardías, puede sobrepasar la capacidad de amortiguamiento del estrés y afectar la salud del anciano méjico-americano. PMID:25190897

  13. [History of Instituto Nacional de Salud Ocupacional del Peru].

    PubMed

    Cossio-Brazzan, Juan M

    2012-06-01

    In Peru, the industry's development has made economic improvements but at the same time, it has had a major impact on the health of the workers; for that reason, it was necessary to generate control mechanisms. So, in 1940 it was created the Departmento de Higiene Industrial, which in 1956 was changed to Instituto de Salud Ocupacional, but it was deactivated in 1994. However, in 2001 it reappeared into the Ministerio de Salud organizational structure with the name of Instituto de Salud Ocupacional "Alberto Hurtado Abadía". Actually, it is the Centro Nacional de Salud Ocupacional y Protección del Ambiente para la Salud (CENSOPAS), organ of the Instituto Nacional de Salud which continues working in synergy with other institutions and sectors, making research to protect the health of exposed persons (workers and community) to contamination and risks associated with economic activities.

  14. Percepción de competencia y adiestramiento profesional especializado relativos al VIH/SIDA en estudiantes y profesionales de la salud: el estigma como un indicador de necesidad

    PubMed Central

    RODRÍGUEZ, Yarimar ROSA; DÍAZ, Nelson VARAS

    2009-01-01

    El proceso de estigmatización asume una devaluación de la persona debido a una característica o marca que haya sido identificada socialmente y que permita que se le describa como diferente. Desde que se desató la epidemia del VIH/SIDA, vivir con la enfermedad ha sido señalado de manera social como una marca estigmatizante. Las manifestaciones de dicha estigmatización se han documentado entre profesionales de la salud. Este estigma puede afectar los servicios de salud que las personas que viven con VIH/SIDA reciben de estos profesionales. Los objetivos de esta investigación fueron explorar: 1) la percepción que tienen estudiantes y profesionales de la salud sobre su nivel de competencia para ofrecer servicios a personas que viven con VIH/SIDA, 2) las opiniones de éstos sobre el tipo de adiestramiento profesional recibido y la necesidad del mismo, y 3) la manifestación de actitudes estigmatizantes como indicadores de necesidad de adiestramiento profesional. La muestra total del estudio estuvo compuesta por 80 de diversas profesiones de la salud. Los resultados reflejan que algunos/as de los/as participantes han recibido formación en VIH pero ésta no ha sido suficiente para contrarrestar las nociones estigmatizantes. Discutimos las implicaciones de los resultados para investigaciones futuras y el desarrollo de intervenciones con vías de minimizar las nociones estigmatizantes en los escenarios de salud. PMID:20011236

  15. [Cambios en la salud sexual de los pacientes obesos tras cirugía bariátrica].

    PubMed

    Pomares-Callejón, María A; Ferrer-Márquez, Manuel; Solvas-Salmerón, María J

    2018-01-01

    Los objetivos del estudio fueron: 1) evaluar la salud sexual en pacientes con obesidad grave/mórbida candidatos a cirugía bariátrica; y 2) valorar la evolución de la salud sexual tras 12 meses de la cirugía. Estudio descriptivo, prospectivo desde febrero de 2011 hasta junio de 2014. Se valoró la actividad sexual en los hombres a través del cuestionario EVAS-H y la función sexual en la mujer a través de la escala FSM (44 pacientes). Durante el estudio basal en los hombres, un 21% de la muestra presentó disfunción sexual en diferentes dimensiones, mientras que un 43% presentó problemas de eyaculación precoz. Tras 12 meses de la intervención, se observó un incremento de la actividad sexual global (p = 0.026). En torno al 70-89% de las mujeres, previamente a la cirugía, no presentaban trastorno. En la evolución no se observaron cambios medios relevantes (p > 0.05). Los pacientes con obesidad grave/mórbida candidatos a cirugía bariátrica presentan alteraciones considerables en diversas dimensiones de la salud sexual. Después de 12 meses de seguimiento, la salud sexual parece mejorar en los hombres. The aims of the study were: 1) to assess sexual health patients severe/morbid obesity patients candidates for bariatric surgery; and 2) to assess sexual health evolution after 12 months of surgery. Descriptive, prospective study from February 2011 to June 2014. Sexual activity in men was valued through EVAS-H questionnaire and through FSM scale on women (44 patients). During the basal study in men, a 21% of the sample showed sexual disfunction in different dimensions, while a 43% showed problems with premature ejaculation. 12 months after surgery, global sexual activity was improved significantly (p = 0,026). Approximately 70-89% of women presented no disturbance before surgery. No average relevant changes were observed within the evolution (p > 0.05). Morbid/severe obesity patients candidates to bariatric surgery, show considerable alterations on diverse

  16. ENVEJECIMIENTO, SALUD Y ECONOMÍA: La Encuesta Nacional sobre Salud y Envejecimiento en México*

    PubMed Central

    2017-01-01

    RESUMEN México vive una transición demográfica en la cual el porcentaje de la población mayor de 50 años de edad crece aceleradamente como resultado de un aumento considerable en la esperanza de vida. Dicha población tiene necesidades particulares que deben ser tomadas en cuenta en la formulación de políticas, sobre todo en materia de acceso a servicios de salud y seguridad social. En este artículo presentamos una descripción general de la Encuesta Nacional de Salud y Envejecimiento (Enasem), un estudio de panel que comenzó en 2001 y que ofrece una oportunidad única para abordar temas demográficos y económicos complejos por medio de la exploración de las características personales, transferencias socioeconómicas e indicadores de salud para una muestra de 15 186 adultos de edad media y avanzada. También presentamos los resultados más relevantes de diferentes estudios que han utilizado la Enasem hasta la fecha. Nuestra revisión indica que México enfrenta desafíos considerables para satisfacer la demanda de servicios médicos para una población que es amenazada por una creciente presencia de enfermedades crónicas, sobre todo para la población de edad avanzada que no cuenta con cobertura de seguro médico. PMID:29375164

  17. Una Red de Expertos en Salud Ambiental de Niños (2015)

    EPA Pesticide Factsheets

    Unidades Pediátricas de Especialidad en Salud Ambiental (PEHSU) tiene expertos en pediatria, alergias e inmunologia, desarrollo neural, toxicologia, y otras, ya que existen varios factores que afectan la salud de los ninos.

  18. Regulando la Enfermedad a través de la Definición y la Restricción: Profesionales de la Salud Hablan sobre el VIH/SIDA1

    PubMed Central

    Rivera, Souhail Malavé; Díaz, Nelson Varas

    2009-01-01

    Resumen Las profesiones de la salud tienen un papel social dual. Por un lado, velan por el mantenimiento de la salud de la población protegiendo el bien común. Por el otro, dictaminan las formas saludables, y por lo tanto socialmente apropiadas, de ser, actuar y pensar. Este último papel, está más ligado al control social de la población que a una preocupación altruista hacia la misma. A través de esta supervisión y control, se construyen los sujetos a los cuales todos/as debemos aspirar a ser para gozar de aceptación social. Los/as profesionales de la salud han jugado un rol protagónico en dicho proceso, siendo los agentes que delimitan y definen lo que es enfermo vs. saludable, útil vs. inútil, apropiado vs. inapropiado. En el caso de la epidemia del VIH, este esfuerzo se ha hecho cada vez más vigente ya que estos/as profesionales juegan un papel importante en el tratamiento de las personas que viven con VIH/SIDA (PVVS). Sin embargo, su función está plasmada de definiciones que sirven para criminalizar a las PVVS. El objetivo de este estudio fue explorar la manera en que una muestra de profesionales de la salud en Puerto Rico construyen a las PVVS. Con este propósito, entrevistamos 80 profesionales de la salud y estudiantes de estas profesiones. Estas entrevistas fueron grabadas, transcritas y sometidas a un análisis de discurso. Los resultados reflejaron que según las personas participantes: 1) la PVVS no es una persona “normal” o funcional bajo los estándares sociales debido a que su salud no se los permite, 2) representa una carga para la sociedad incluyendo familiares, amigos/as, el mundo del trabajo, e incluso para el gobierno, 3) debe ser vigilada porque representa un riesgo para la persona seronegativa que es descrita como saludable y productiva, y 4) necesita que su salud y conducta sexual sean controladas por vía legal y/o por las personas que representan las instituciones sociales, como lo son los/as profesionales de la salud

  19. El medioambiente y su salud

    EPA Pesticide Factsheets

    Las acciones que usted toda en su diario vivir tienen un impacto en su medioambiente y su salud. La Agencia de Protección Ambiental de EE.UU. (EPA, por sus siglas en inglés) ofrece información sobre los pasos que puede tomar para protegerse a usted y prote

  20. La salud en personas con discapacidad intelectual en España: estudio europeo POMONA-II

    PubMed Central

    Martínez-Leal, Rafael; Salvador-Carulla, Luis; Gutiérrez-Colosía, Mencía Ruiz; Nadal, Margarida; Novell-Alsina, Ramón; Martorell, Almudena; González-Gordón, Rodrigo G.; Mérida-Gutiérrez, M. Reyes; Ángel, Silvia; Milagrosa-Tejonero, Luisa; Rodríguez, Alicia; García-Gutiérrez, Juan C.; Pérez-Vicente, Amado; García-Ibáñez, José; Aguilera-Inés, Francisco

    2011-01-01

    Introducción Estudios internacionales demuestran que existe un patrón diferenciado de salud y una disparidad en la atención sanitaria entre personas con discapacidad intelectual (DI) y población general. Objetivo Obtener datos sobre el estado de salud de las personas con DI y compararlos con datos de población general. Pacientes y métodos Se utilizó el conjunto de indicadores de salud P15 en una muestra de 111 sujetos con DI. Los datos de salud encontrados se compararon según el tipo de residencia de los sujetos y se utilizó la Encuesta Nacional de Salud 2006 para comparar estos datos con los de la población general. Resultados La muestra con DI presentó 25 veces más casos de epilepsia y el doble de obesidad. Un 20% presentó dolor bucal, y existió una alta presencia de problemas sensoriales, de movilidad y psicosis. Sin embargo, encontramos una baja presencia de patologías como la diabetes, la hipertensión, la osteoartritis y la osteoporosis. También presentaron una menor participación en programas de prevención y promoción de la salud, un mayor número de ingresos hospitalarios y un uso menor de los servicios de urgencia. Conclusiones El patrón de salud de las personas con DI difiere del de la población general, y éstas realizan un uso distinto de los servicios sanitarios. Es importante el desarrollo de programas de promoción de salud y de formación profesional específicamente diseñados para la atención de personas con DI, así como la implementación de encuestas de salud que incluyan datos sobre esta población. PMID:21948011

  1. Incentivos para atraer y retener personal de salud de zonas rurales del Perú: un estudio cualitativo

    PubMed Central

    Huicho, Luis; Canseco, Francisco Díez; Lema, Claudia; Miranda, J. Jaime; Lescano, Andrés G.

    2014-01-01

    El objetivo fue identificar incentivos de atracción y retención en zonas rurales y distantes de Ayacucho, Perú. Fueron realizadas entrevistas en profundidad con 80 médicos, enfermeras, obstetras y técnicos (20 por grupo) de las zonas más pobres y con 11 funcionarios. No existen políticas sistemáticas de atracción y retención de personal de salud en Ayacucho. Los principales incentivos, en orden de importancia, fueron mejoras salariales, oportunidades de formación y capacitación, estabilidad laboral y nombramiento, mejoras en infraestructura y equipos, e incremento del personal. Se mencionaron también mejoras en la vivienda y alimentación, mayor cercanía con la familia y reconocimiento por el sistema de salud. Existen coincidencias y singularidades entre los distintos grupos sobre los incentivos clave para estimular el trabajo rural, que deben considerarse al diseñar políticas públicas. Las iniciativas del Estado deben comprender procesos rigurosos de monitoreo y evaluación, para asegurar que las mismas tengan el impacto deseado. PMID:22488318

  2. Engaging Community With Promotores de Salud to Support Infant Nutrition and Breastfeeding Among Latinas Residing in Los Angeles County: Salud con Hyland's.

    PubMed

    Rios-Ellis, Britt; Nguyen-Rodriguez, Selena T; Espinoza, Lilia; Galvez, Gino; Garcia-Vega, Melawhy

    2015-01-01

    The Salud con Hyland's Project: Comienzo Saludable, Familia Sana [Health With Hyland's Project: Healthy Start, Healthy Family],was developed to provide education and support to Latina mothers regarding healthy infant feeding practices and maternal health. The promotora-delivered intervention was comprised of two charlas (educational sessions) and a supplemental, culturally and linguistically relevant infant feeding and care rolling calendar. Results indicate that the intervention increased intention to breastfeed exclusively, as well as to delay infant initiation of solids by 5 to 6 months. Qualitative feedback identified barriers to maternal and child health education as well as highlighted several benefits of the intervention.

  3. Strengthening rural Latinos' civic engagement for health: The Voceros de Salud project.

    PubMed

    López-Cevallos, Daniel; Dierwechter, Tatiana; Volkmann, Kelly; Patton-López, Megan

    2013-11-01

    This article describes the Latino Health Ambassadors Network (Voceros de Salud ) project created to support and mobilize Latino community leaders to address health inequalities in a rural Oregon county. Voceros de Salud is discussed as a model that other rural communities may implement towards strengthening Latino civic engagement for health.

  4. A promotora de salud model for addressing cardiovascular disease risk factors in the US-Mexico border region.

    PubMed

    Balcázar, Héctor; Alvarado, Matilde; Cantu, Frank; Pedregon, Veronica; Fulwood, Robert

    2009-01-01

    In 2002, the National Heart, Lung, and Blood Institute partnered with the Health Resources and Services Administration's (HRSA's) Bureau of Primary Health Care and Office of Rural Health Policy to address cardiovascular health in the US-Mexico border region. From 2003 through 2005, the 2 agencies agreed to conduct an intervention program using Salud para su Corazón with promotores de salud (community health workers) in high-risk Hispanic communities served by community health centers (CHCs) in the border region to reduce risk factors and improve health behaviors. Promotores de salud from each CHC delivered lessons from the curriculum Your Heart, Your Life. Four centers implemented a 1-group pretest-posttest study design. Educational sessions were delivered for 2 to 3 months. To test Salud para su Corazón-HRSA health objectives, the CHCs conducted the program and assessed behavioral and clinical outcomes at baseline, 3 months, 6 months, and 12 months after the intervention. A 2-sample paired t test and analyses of variance were used to evaluate differences from baseline to postintervention. Changes in heart-healthy behaviors were observed, as they have been in previous Salud para su Corazón studies, lending credibility to the effectiveness of a promotores de salud program in a clinical setting. Positive changes were also observed in low-density lipoprotein cholesterol level, triglyceride level, waist circumference, diastolic blood pressure, weight, and glycated hemoglobin (HbA1c). Results suggest that integrating promotores de salud into clinical practices is a promising strategy for culturally competent and effective service delivery. Promotores de salud build coalitions and partnerships in the community. The Salud para su Corazón-HRSA initiative was successful in helping to develop an infrastructure to support a promotores de salud workforce in the US-Mexico border region.

  5. [Batas Nómadas in Madrid Salud: art and artists in professional community health teams].

    PubMed

    Castillejo, Mar; Fernández-Cedena, Jorge; Siles, Silvia; Claver, María Dolores; Ávila, Noemí

    2018-06-14

    This article describes the strategy of incorporating artists into the teams of community health in the city of Madrid, specifically in the Madrid Salud Centers. The artistic colletive, Batas Nómadas, formed by three artists expertized in visual arts, has developed performances and participatory aproach to explain the incorporation of art and artists in these teams of professionals of Madrid Salud. Batas Nómadas has carried out sessions in 14 work teams of the Madrid Salud Centers and has collected data in a creative way from the 179 professionals that have participated in these sessions. These actions have shown some needs in community health, and have noticed a meaningful reflection on the usefulness of the art to develop participative strategies into the Madrid Salud teams. Copyright © 2018. Publicado por Elsevier España, S.L.U.

  6. Translation and adaptation of the Competencias Esenciales en Salud Pública para los recursos humanos en salud 1

    PubMed Central

    de Almeida, Maria de Lourdes; Peres, Aida Maris; Ferreira, Maria Manuela Frederico; Mantovani, Maria de Fátima

    2017-01-01

    ABSTRACT Objective: to perform the translation and cultural adaptation of the document named Marco Regional de Competencias Esenciales en Salud Pública para los Recursos Humanos en Salud de la Región de las Américas (Regional Framework of Core Competencies in Public Health for Health Human Resources in the Region of Americas) from Spanish to Brazilian Portuguese. Method: a methodological study comprising the following phases: authorization for translation; initial translation; synthesis of translations and consensus; back-translation and formation of an expert committee. Result: in the translation of domain names, there was no difference in 66.7% (N = 4); in the translation of domain description and competencies there were divergences in 100% of them (N = 6, N = 56). A consensus of more than 80% was obtained in the translation and improvement in the expert committee by the change of words and expressions for approximation of meanings to the Brazilian context. Conclusion: the translated and adapted document has the potential of application in research, and use in the practice of collective/public health care in Brazil. PMID:28591302

  7. Sentido de coherencia y mapa de activos para la salud en jóvenes presos de la Comunidad Valenciana en España.

    PubMed

    Vera-Remartínez, Enrique J; Paredes-Carbonell, Joan J; Aviñó Juan-Ulpiano, Dory; Jiménez-Pérez, Mercedes; Araujo Pérez, Rosa; Agulló-Cantos, José M; Mora Notario, Almudena

    2017-09-01

    Estudio realizado desde el enfoque de la salutogénesis que pretende determinar el sentido de coherencia (SOC) en jóvenes presos de la Comunidad Valenciana en España y elaborar un mapa de activos para la salud dirigido a promover la salud en esta población. Se utilizó el test "SOC-13" y un cuestionario de preguntas abiertas elaborado ad hoc, el cual autocompletaron los internos de 18 a 22 años de edad, de los tres centros penitenciarios de la región. Participaron 124 jóvenes varones (ya que no había ninguna mujer) y se recogieron variables sociodemográficas y penitenciarias. En el análisis cuantitativo, las variables categóricas se expresaron como frecuencias absolutas y relativas; y las cuantitativas, mediante medias con intervalos de confianza (IC) al 95%. Se realizó un estudio comparativo bivariante, utilizando las siguientes pruebas: Student t-test, análisis de variación (ANOVA), Wilcoxon y Ji-cuadrado. Del cuestionario de preguntas abiertas, se realizó un análisis cualitativo descriptivo temático de los activos identificados, clasificándolos en: internos (recursos personales, en relación con los demás y capacidad para realizar comportamientos saludables) y externos (personas, grupos, instituciones y espacios físicos, situados tanto dentro como fuera de prisión). La edad media fue de 21,1 años (IC 95%: 20,8-21,3); y el SOC de 52,4 (IC 95%: 50,5-54,3), de entre un valor mínimo de 13 y máximo de 91 para la prueba. Los internos del centro penitenciario que ofrecía más actividades escolares y deportivas obtuvieron una puntuación mayor en la dimensión de significatividad del SOC ( p = 0,024), y los internos inmigrantes presentaron un SOC superior ( p = 0,037) a los españoles, en los tres centros. Los jóvenes identificaron los activos internos que cualitativamente se vinculan con las dimensiones de comprensibilidad, manejabilidad y significatividad del SOC; y los activos externos, sobre todo los amigos, familiares y espacios

  8. Representaciones sociales sobre la problemática de Chagas en un servicio de salud comunitaria del Gran La Plata, Buenos Aires, Argentina.

    PubMed

    Sanmartino, Mariana; Amieva, Carolina; Medone, Y Paula

    2017-03-01

    Hablar de Chagas es hablar de una problemática compleja, definida por elementos de carácter biomédico, epidemiológico, sociocultural y político, que se conjugan dinámicamente. En este trabajo buscamos identificar y analizar las representaciones sobre Chagas de los integrantes del equipo de salud de un centro de atención periurbano de la ciudad de La Plata, Argentina. Mediante un abordaje cualitativo, se realizaron entrevistas semiestructuradas y se analizaron las respuestas con la técnica del análisis de contenido. Los resultados mostraron que la mayor parte de las personas entrevistadas no contempla al Chagas como una problemática en su contexto laboral cotidiano y manifiestan un fuerte sesgo biologicista en su formación profesional. Con este trabajo señalamos la urgente necesidad de reflexionar críticamente en torno a la formación de los profesionales de la salud en relación a problemáticas socioambientales complejas de importancia regional, como lo es el Chagas.

  9. Perspectivas para mejorar la salud sexual de las minorías sexuales y de identidad de género en Guatemala

    PubMed Central

    Alonzo, Jorge; Mann, Lilli; Simán, Florence; Sun, Christina J.; Andrade, Mario; Villatoro, Guillermo; Rhodes, Scott D.

    2016-01-01

    Resumen Las minorías sexuales y de identidad de género en Guatemala son afectadas de manera desproporcionada por el VIH y otras infecciones transmitidas sexualmente (ITS). Sin embargo, poco se sabe de los factores que contribuyen al riesgo de infección en estas minorías. Investigadores de Estados Unidos y Guatemala quisimos informarnos sobre las necesidades de salud sexual e identificar características de programas de prevención de VIH/ITS para estas minorías. Llevamos a cabo 8 grupos focales con hombres gay, bisexuales y personas transgénero y entrevistas en profundidad con líderes comunitarios. Utilizamos el Método Comparativo Constante para analizar las transcripciones. Identificamos 24 factores que influyen en la salud sexual y 16 características de programas para reducir el riesgo de VIH/ITS en estas poblaciones. La identificación de factores de conductas sexuales de riesgo y de características de programas potencialmente efectivos ofrece gran potencial para desarrollar intervenciones que contribuyan a reducir el riesgo de infección por VIH/ITS en estas minorías en Guatemala. PMID:27494000

  10. Significado de psicólogas/os de atención primaria de salud sobre la intervención psicosocial de grupo en el tratamiento de la depresión en Chile.

    PubMed

    Andrade, Gonzalo; Espinoza, Adriana

    2017-11-01

    En Chile, el tratamiento de la depresión en salud pública promueve la realización de Intervenciones Psicosociales en Grupo (IPG) para todos los casos diagnosticados, no obstante, se observa una baja implementación de estas prestaciones. El presente artículo describe y caracteriza, desde el punto de vista de la disciplina psicológica, el significado de psicólogas/os que trabajan en consultorios de atención primaria de salud (APS) sobre las IPG en el tratamiento de la depresión. Se entrevistaron a ocho psicólogas/os de los distintos Servicios de Salud de la Región Metropolitana de Santiago. Este estudio se basó en las premisas de la Teoría Fundamentada, utilizando sus estrategias de análisis. La categoría "los grupos no nos resultan" expone las principales barreras que impiden la realización de estas intervenciones. La carga laboral centrada en atenciones individuales, el escaso presupuesto destinado a su implementación, y la falta de instalaciones adecuadas para realizar las IPG emergen como barreras institucionales. Asi mismo, la "poca fe" en la efectividad del trabajo en grupo, la figura de las/os psicólogas/os como únicas/os profesionales capacitadas/os para trabajar con las emociones, la idea de que la baja adherencia al tratamiento no depende de su ejercicio laboral, y el hecho de que la implementación de las IPG dependa del interés individual de algunas/os profesionales, emergen como las principales resistencias profesionales a su realización. Se discuten los alcances de estas barreras, y se proponen soluciones que favorezcan el cambio cultural necesario para que las/los profesionales e instituciones de salud puedan alinearse en plenitud con el modelo comunitario de salud propuesto por el Plan Nacional de Salud Mental y Psiquiatría (PNSMP).

  11. Folic Acid Education for Hispanic Women: The Promotora de Salud Model.

    PubMed

    Flores, Alina L; Isenburg, Jennifer; Hillard, Christina L; deRosset, Leslie; Colen, Lisa; Bush, Troy; Mai, Cara T

    2017-02-01

    Although rates of neural tube defects (NTDs) have declined in the United States since fortification, disparities still exist with Hispanic women having the highest risk of giving birth to a baby with a NTD. The Promotora de Salud model using community lay health workers has been shown to be an effective tool for reaching Hispanics for a variety of health topics; however, literature on its effectiveness in folic acid interventions is limited. An intervention using the Promotora de Salud model was implemented in four U.S. counties with large populations of Hispanic women. The study comprised the following: (1) a written pretest survey to establish baseline levels of folic acid awareness, knowledge, and consumption; (2) a small group education intervention along with a 90-day supply of multivitamins; and (3) a postintervention (posttest) assessment conducted 4 months following the intervention. Statistically significant differences in pre- and posttests were observed for general awareness about folic acid and vitamins and specific knowledge about the benefits of folic acid. Statistically significant changes were also seen in vitamin consumption and multivitamin consumption. Folic acid supplement consumption increased dramatically by the end of the study. The Promotora de Salud model relies on interpersonal connections forged between promotoras and the communities they serve to help drive positive health behaviors. The findings underscore the positive impact that these interpersonal connections can have on increasing awareness, knowledge, and consumption of folic acid. Utilizing the Promotora de Salud model to reach targeted populations might help organizations successfully implement their programs in a culturally appropriate manner.

  12. Folic Acid Education for Hispanic Women: The Promotora de Salud Model

    PubMed Central

    Flores, Alina L.; Isenburg, Jennifer; Hillard, Christina L.; deRosset, Leslie; Colen, Lisa; Bush, Troy; Mai, Cara T.

    2017-01-01

    Background Although rates of neural tube defects (NTDs) have declined in the United States since fortification, disparities still exist with Hispanic women having the highest risk of giving birth to a baby with a NTD. The Promotora de Salud model has been shown to be an effective tool for reaching Hispanics for a variety of health topics; however, literature on its effectiveness in folic acid interventions is limited. Methods An intervention using the Promotora de Salud model was implemented in four U.S. counties with large populations of Hispanic women. The study comprised: 1) a written pre-test survey to establish baseline levels of folic acid awareness, knowledge, and consumption; 2) a small group education intervention along with a 90-day supply of multivitamins; and 3) a post-intervention (post-test) assessment conducted four months following the intervention. Results Statistically significant differences in pre- and post-tests were observed for general awareness about folic acid and vitamins, and specific knowledge about the benefits of folic acid. Statistically significant changes were also seen in vitamin consumption and multivitamin consumption. Folic acid supplement consumption increased dramatically by the end of the study. Conclusions The Promotora de Salud model relies on interpersonal connections forged between promotoras and the communities they serve to help drive positive health behaviors. The findings underscore the positive impact that these interpersonal connections can have on increasing awareness, knowledge, and consumption of folic acid. Utilizing the Promotora de Salud model to reach targeted populations might help organizations successfully implement their programs in a culturally appropriate manner. PMID:28067585

  13. Bioética y justicia ambiental en la salud de los pobladores andinos de Perú

    PubMed Central

    Alcantara Zapata, Diana E.; Mazzei Pimental, Marinella

    2018-01-01

    Este artículo intenta plasmar el panorama bioético-ambiental de la salud del poblador que habita en la sierra peruana, remarcando la inequidad en el acceso a los servicios de salud que existe en esta región y reflexionando sobre las posibles causas contextuales, históricas y actuales que han originado diferencias entre el poblador andino del incanato y el poblador andino actual, el cambio de cosmovisón sobre el ambiente y los recursos, el deterioro del enfoque de justicia, solidaridad, bienestar y respeto hacia el ser humano y la naturaleza. Además, se describe la salud desde el escenario histórico de esta región, donde la salud pública tiene y tendrá como desafío la aplicación de programas que respondan a las necesidades específicas de esta población, con un enfoque dirigido hacia lo ambiental. PMID:29708219

  14. CONTAMINACIÓN AMBIENTAL, VARIABILIDAD CLIMÁTICA Y CAMBIO CLIMÁTICO: UNA REVISIÓN DEL IMPACTO EN LA SALUD DE LA POBLACIÓN PERUANA

    PubMed Central

    Gonzales, Gustavo F.; Zevallos, Alisson; Gonzales-Castañeda, Cynthia; Nuñez, Denisse; Gastañaga, Carmen; Cabezas, César; Naeher, Luke; Levy, Karen; Steenland, Kyle

    2015-01-01

    RESUMEN El presente artículo es una revisión sobre la contaminación del agua, el aire y el efecto del cambio climático en la salud de la población peruana. Uno de los principales contaminantes del aire es el material particulado menor de 2,5 μ (PM 2,5), en la ciudad de Lima, anualmente 2300 muertes prematuras son atribuibles a este contaminante. Otro problema es la contaminación del aire domiciliario por el uso de cocinas con combustible de biomasa, donde la exposición excesiva a PM 2,5 dentro de las casas es responsable de aproximadamente 3000 muertes prematuras anuales entre adultos, con otro número desconocido de muertes entre niños debido a infecciones respiratorias. La contaminación del agua tiene como principales causas los desagües vertidos directamente a los ríos, minerales (arsénico) de varias fuentes, y fallas de las plantas de tratamiento. En el Perú, el cambio climático puede impactar en la frecuencia y severidad del fenómeno de El Niño oscilación del sur (ENSO) que se ha asociado con un incremento en los casos de enfermedades como cólera, malaria y dengue. El cambio climático incrementa la temperatura y puede extender las áreas afectadas por enfermedades transmitidas por vectores, además de tener efecto en la disponibilidad del agua y en la contaminación del aire. En conclusión, el Perú, pasa por una transición de factores de riesgo ambientales, donde coexisten riesgos tradicionales y modernos, y persisten los problemas infecciosos y crónicos, algunos de los cuales se asocian con problemas de contaminación de agua y de aire. PMID:25418656

  15. Effectiveness of a Brief Home Parenting Intervention for Reducing Early Sexual Risks Among Latino Adolescents: Salud y Éxito.

    PubMed

    O'Donnell, Lydia; Fuxman, Shai

    2017-11-01

    Teen pregnancy rates and related risks remain elevated among Latino teens. We tested the impact on youth sexual behaviors of a brief, culturally targeted, bilingual media intervention designed for parents of young adolescents. Salud y éxito (Health & Success) uses dramatic audio stories to model positive parenting practices. After completing classroom surveys, 27 urban schools in the Northeast and Southwest serving low-income Latino communities were randomized so that all families of seventh grade students were sent either: (1) booklets on healthy eating and exercise; (2) Salud-50, where families either received booklets or the intervention, or (3) Salud-100, where all families received the intervention. Postintervention follow-up surveys were conducted at 3- and 12-months. Multilevel analyses tested intervention effects, controlling for sociodemographics. Compared with controls, at 12-months postintervention (8th grade spring), youth in Salud-100 report lower sexual risks (touching, AOR 1.46, CI 1.19-0.84, p < .001; lifetime sex (AOR 0.74, CI 0.61-0.90, p < .01); and sex intentions (AOR 0.78, CI 0.63-0.96, p < .05). Consistent with a dose-response, Salud-50 results are between those from Salud-100 and control schools. Salud y éxito is an effective parenting intervention that can augment school-based health and sexuality education and help Latino parents support their children during early adolescence. © 2017, American School Health Association.

  16. The Agua Salud Project, Central Panama

    NASA Astrophysics Data System (ADS)

    Stallard, R. F.; Elsenbeer, H.; Ogden, F. L.; Hall, J. S.

    2007-12-01

    The Agua Salud Project utilizes the Panama Canal's central role in world commerce to focus global attention on the ecosystem services provided by tropical forests. It will be the largest field experiment of its kind in the tropics aimed at quantifying the environmental services (water, carbon, and biodiversity) provided by tropical forests. The Agua Salud Watershed is our principal field site. This watershed and the headwaters of several adjacent rivers include both protected mature forests and a wide variety of land uses that are typical of rural Panama. Experiments at the scale of entire catchments will permit complete water and carbon inventories and exchanges for different landscape uses. The following questions will be addressed: (1) How do landscape treatments and management approaches affect ecosystem services such as carbon storage, water quality and quantity, dry- season water supply, and biodiversity? (2) Can management techniques be designed to optimize forest production along with ecosystem services during reforestation? (3) Do different tree planting treatments and landscape management approaches influence groundwater storage, which is thought to be critical to maintaining dry-season flow, thus insuring the full operation of the Canal during periods of reduced rainfall and severe climatic events such as El Niño. In addition we anticipate expanding this project to address biodiversity, social, and economic values of these forests.

  17. Salud Para Su Corazon (Health for Your Heart) Community Health Worker Model

    PubMed Central

    Balcazar, H.; Alvarado, M.; Ortiz, G.

    2012-01-01

    This article describes 6 Salud Para Su Corazon (SPSC) family of programs that have addressed cardiovascular disease risk reduction in Hispanic communities facilitated by community health workers (CHWs) or Promotores de Salud (PS). A synopsis of the programs illustrates the designs and methodological approaches that combine community-based participatory research for 2 types of settings: community and clinical. Examples are provided as to how CHWs can serve as agents of change in these settings. A description is presented of a sustainability framework for the SPSC family of programs. Finally, implications are summarized for utilizing the SPSC CHW/PS model to inform ambulatory care management and policy. PMID:21914992

  18. EXPERIENCIAS RELACIONADAS A UNA INTERVENCIÓN PARA REDUCIR EL ESTIGMA RELACIONADO AL VIH/SIDA ENTRE ESTUDIANTES DE MEDICINA EN PUERTO RICO

    PubMed Central

    Cintrón-Bou, Francheska; Varas-Díaz, Nelson; Marzán-Rodríguez, Melissa; Neilands, Torsten B.

    2016-01-01

    Existe estigma relacionado al VIH. A las personas con VIH/SIDA-PCVS se les viola sus derechos y obstaculiza su bienestar mental/físico. Profesionales de la salud-PS son fuente de apoyo primordial, sin embargo estos/as le estigmatizan. Es útil adiestrar a PS en relación al estigma social. Implantamos la intervención para reducir el estigma relacionado al VIH/SIDA con 507 estudiantes de medicina. Resultó ser una intervención efectiva, hubo reducción en los niveles de estigma a partir de nuestra intervención y diferencias significativas con el grupo control (p≤.05). Generar espacios de adiestramiento para atender el estigma relacionado al VIH/SIDA es pertinente para la psicología comunitaria porque colaboramos en la reducción de actitudes estigmatizantes que afectan adversamente la prevención de nuevas infecciones, la adherencia al tratamiento antirretroviral y la calidad de vida. PMID:27829690

  19. Efectos de la radiación UV en la salud

    EPA Pesticide Factsheets

    La reducción de la capa de ozono disminuye la protección natural que ofrece nuestra atmósfera contra la radiación ultravioleta (UV) perjudicial del sol. Esta página web proporciona una descripción general de los principales problemas de salud relacionados

  20. Evaluation of the community-based chronic disease prevention program Meta Salud in Northern Mexico, 2011-2012.

    PubMed

    Denman, Catalina A; Rosales, Cecilia; Cornejo, Elsa; Bell, Melanie L; Munguía, Diana; Zepeda, Tanyha; Carvajal, Scott; Guernsey de Zapien, Jill

    2014-09-11

    Meta Salud is a community health worker-facilitated intervention in Hermosillo, Sonora, Mexico, and was adapted from Pasos Adelante, a similar evidence-based intervention developed for a Latino population in the United States-Mexico border region. The objective of this study was to examine outcomes for Meta Salud and compare them with outcomes for Pasos Adelante. This pretest-posttest study took place during 13 weeks among low-income residents of an urban area. The program provided information on topics such as heart health, physical activity, nutrition, diabetes, healthy weight, community health, and emotional well-being; included individual and group activities aimed at motivating behavior change; and encouraged participants to engage in brisk physical activity. We found significant decreases from baseline to conclusion in body mass index, waist circumference, hip circumference, weight, triglycerides, and low-density lipoprotein (LDL) cholesterol. From baseline to 3-month follow-up, we found significant decreases in body mass index, waist circumference, weight, LDL cholesterol, and glucose, and an increase in high-density lipoprotein cholesterol. Outcomes for Meta Salud were similar to those found for Pasos Adelante. The physiological improvements found among participants in Meta Salud and comparable changes among participants in Pasos Adelante suggest a scalable and effective behavioral intervention for regions of the United States and Mexico that share a common boundary or have similar cultural and linguistic characteristics.

  1. Salud mental en desastres naturales: estrategias interventivas con adultos mayores en sectores rurales de Chile.

    PubMed

    Osorio-Parraguez, Paulina; Espinoza, Adriana

    2016-06-01

    En el presente artículo se da a conocer una estrategia de intervención llevada a cabo con adultos mayores en la comuna de Paredones, sexta región de Chile, con posterioridad al terremoto y tsunami del 27 de febrero 2010 en Chile, en el contexto de una investigación sobre fortalezas y vulnerabilidades desplegadas por este grupo etario, con posterioridad a un desastre natural. Se presenta una descripción del desarrollo metodológico de la intervención y de los sustentos teóricos y conceptuales en los que se basa. Como resultado de este proceso, se propone una estrategia que trabaje a través de la identificación de las propias experiencias y fortalezas de los sujetos. De tal forma se minimizan los efectos negativos de los determinantes sociales de la salud (como la edad y el lugar de residencia) en contexto de crisis; permitiendo a los adultos mayores fortalecer sus recursos individuales y colectivos, en pro de su bienestar psicosocial. © The Author(s) 2015.

  2. Effectiveness of personalized face-to-face and telephone nursing counseling interventions for cardiovascular risk factors: a controlled clinical trial.

    PubMed

    Vílchez Barboza, Vivian; Klijn, Tatiana Paravic; Salazar Molina, Alide; Sáez Carrillo, Katia Lorena

    2016-08-08

    participantes; grupo intervención con consulta tradicional más consejería de enfermería personalizada y telefónica durante 7 meses (n=53); y grupo control (n=56); siguiendo la declaración del Consolidated Standards of Reporting Trials. mujeres del grupo intervención, presentaron aumento significativo con respecto al grupo control, en componentes de salud física y mental; disminución de: peso, circunferencia abdominal, colesterol total, colesterol lipoproteínas de baja densidad e índice de aterogenicidad. En hombres del grupo intervención se reflejó como efectos atribuibles a la intervención: 1) aumento en dimensiones del rol físico y emocional; 2) disminución: presión sistólica y diastólica, circunferencia abdominal, colesterol total, colesterol lipoproteínas de baja densidad, índice de aterogenicidad, factor de riesgo cardiovascular y riesgo coronario a 10 años. esta intervención es una estrategia efectiva para el control de tres factores de riesgo cardiovascular y mejoría de calidad de vida relacionada con la salud. avaliar o efeito e as diferenças por sexo de uma intervenção inovadora: o aconselhamento personalizado e por telefone em enfermagem, visando o controle de fatores de risco cardiovascular (hipertensão arterial, dislipidemia e sobrepeso) e a melhora na qualidade de vida relacionada à saúde, fortalecendo a autoeficácia e o apoio social a pessoas que usam o programa de saúde cardiovascular de Centros Municipais de Saúde. ensaio clínico controlado e randomizado, participantes randomizados, grupo de intervenção: consulta tradicional mais aconselhamento personalizado e por telefone em enfermagem por 7 meses (n = 53); e grupo de controle (n = 56); seguindo a declaração Consolidated Standards of Reporting Trials Statement. mulheres do grupo intervenção apresentaram um aumento significativo, em relação ao grupo controle, nos componentes de saúde mental e física, com diminuição do peso, circunferência abdominal, colesterol total

  3. Evaluation of the Community-Based Chronic Disease Prevention Program Meta Salud in Northern Mexico, 2011–2012

    PubMed Central

    Rosales, Cecilia; Cornejo, Elsa; Bell, Melanie L.; Munguía, Diana; Zepeda, Tanyha; Carvajal, Scott; Guernsey de Zapien, Jill

    2014-01-01

    Introduction Meta Salud is a community health worker–facilitated intervention in Hermosillo, Sonora, Mexico, and was adapted from Pasos Adelante, a similar evidence-based intervention developed for a Latino population in the United States–Mexico border region. The objective of this study was to examine outcomes for Meta Salud and compare them with outcomes for Pasos Adelante. Methods This pretest–posttest study took place during 13 weeks among low-income residents of an urban area. The program provided information on topics such as heart health, physical activity, nutrition, diabetes, healthy weight, community health, and emotional well-being; included individual and group activities aimed at motivating behavior change; and encouraged participants to engage in brisk physical activity. Results We found significant decreases from baseline to conclusion in body mass index, waist circumference, hip circumference, weight, triglycerides, and low-density lipoprotein (LDL) cholesterol. From baseline to 3-month follow-up, we found significant decreases in body mass index, waist circumference, weight, LDL cholesterol, and glucose, and an increase in high-density lipoprotein cholesterol. Outcomes for Meta Salud were similar to those found for Pasos Adelante. Conclusion The physiological improvements found among participants in Meta Salud and comparable changes among participants in Pasos Adelante suggest a scalable and effective behavioral intervention for regions of the United States and Mexico that share a common boundary or have similar cultural and linguistic characteristics. PMID:25211502

  4. I choose health (Elijo Salud: impacting youth through parish nursing.

    PubMed

    Oakley, Janet; Hoebeke, Roberta

    2014-01-01

    The 2009-2010 National Health and Nutritional Examination Survey (NHANES) found that 34% of adolescents are overweight and 18% obese. The chance of an overweight/obese adolescent becoming an overweight/obese adult by age 35 is 60%. Hispanic youth are at risk for becoming obese related to eating habits. This paper describes an intervention, I Choose Health (Elijo Salud), with Hispanic church youth.

  5. Avisos de salud sobre el PFOA y PFOS en el agua potable

    EPA Pesticide Factsheets

    La EPA estableció avisos de salud sobre el ácido perfluorooctanoico (PFOA) y el sulfonato de perfluorooctano (PFOS) para proporcionar información a los operadores de sistemas de agua potable y funcionarios estatales, tribales y locales sobre los riesgos de

  6. A pilot study of Trabajadora de salud, a lay health worker intervention for Latinas/os with traumatic brain injuries and their caregivers.

    PubMed

    Linton, Kristen F; Kim, Bum Jung

    2018-01-01

    Latinas/os with traumatic brain injuries (TBIs) and their caregivers experience worse outcomes than others. The study aimed to assess the acceptability and promise of Trabajadora de Salud on the functional abilities, hospital readmission, rehabilitation, employment, depression, somatic symptoms, and caregiver burden among Latinas/os with TBIs and their caregivers. A pre-posttest experimental pilot study was conducted. A total of eight Latina/o adult patients (50% female) with mild or moderate TBI and six of their caregivers (66.7% female) were randomized to receive Trabajadora de Salud or a telephone only control group. Trabajadora de Salud, a three-month, in-home intervention administered by bilingual lay health workers, focused on: 1) providing empathy and validation of TBI symptoms, 2) addressing basic needs, 3) goal setting, and 4) improving communication with healthcare providers. Trabajadora de Salud was widely accepted by patients, caregivers, and health professionals. The functional, depression, and somatic symptoms of the patients as well as the somatic symptoms and caregiver burden of the caregivers improved more for participants in the intervention group than the control group. Trabajadora de Salud demonstrated promise in improving outcomes of Latinas/os with TBIs and their caregivers and should be further studied. Copyright © 2017 Elsevier Inc. All rights reserved.

  7. Adaptaciones al ejercicio físico en el perfil lipídico y la salud cardiovascular de obesos mórbidos.

    PubMed

    Delgado-Floody, Pedro; Caamaño-Navarrete, Felipe; Jerez-Mayorga, Daniel; Martínez-Salazar, Cristian; García-Pinillos, Felipe; Latorre-Román, Pedro

    2017-01-01

    To assess the effects of a physical exercise program on the lipid profile, weight status and the cardiovascular health of obese candidates for bariatric surgery. 22 morbidly obese patients participated in a 6-month physical exercise program. 16 formed the adherent group (attendance ≥ 80%; age: 37.81 ± 11.90 years) and six the non-adherent group (attendance < 80%; age: 45.83 ± 14.23 years). Before and 72 h after the last session were evaluated: weight, body mass index (BMI), contour waist, blood pressure, fasting, cardio respiratory fitness, cholesterol and triglycerides. Weight, BMI and WC showed significant changes (p < 0.05) in both groups, with the results of the adherent group being better. In the adherent group, cardiorespiratory capacity (p = 0.001) was also increased, while diastolic pressure (p = 0.011), basal glycemia (p = 0.021) and triglycerides decreased significantly (p < 0.001). The non-adherent group did not present significant changes in these variables (p ≥ 0.05). The intervention was feasible to perform without negative effects for the participants, and it is possible to recommend improving the cardiovascular health of these of patients. Copyright: © 2017 SecretarÍa de Salud

  8. Caries prevalence after cessation of water fluoridation in La Salud, Cuba.

    PubMed

    Künzel, W; Fischer, T

    2000-01-01

    In the past, caries has usually increased after cessation of water fluoridation. More recently an opposite trend could be observed: DMFT remaining stable or even decreasing further. The aim of the present study conducted in La Salud (Province of Habana) in March 1997 was to analyse the current caries trend under the special climatic and nutritional conditions of the subtropical sugar island Cuba, following the cessation, in 1990, of water fluoridation (0.8 ppm F). Diagnostic evaluations were carried out using the same methods as in 1973 and 1982. Boys and girls aged 6-13 years (N = 414), lifelong residents in La Salud, were examined. Between 1973 and 1982 the mean DMFT had decreased by 71.4%, the mean DMFS by 73. 3% and the percentage of caries-free children had increased from 26. 3 to 61.6%. In 1997, following the cessation of drinking water fluoridation, in contrast to an expected rise in caries prevalence, DMFT and DMFS values remained at a low level for the 6- to 9-year-olds and appeared to decrease for the 10/11-year-olds (from 1. 1 to 0.8) and DMFS (from 1.5 to 1.2). In the 12/13-year-olds, there was a significant decrease (DMFT from 2.1 to 1.1; DMFS from 3.1 to 1. 5), while the percentage of caries-free children of this age group had increased from 4.8 (1973) and 33.3 (1982) up to 55.2%. A possible explanation for this unexpected finding and for the good oral health status of the children in La Salud is the effect of the school mouthrinsing programme, which has involved fortnightly mouthrinses with 0.2% NaF solutions (i.e. 15 times/year) since 1990.

  9. Promotores de salud and community health workers: an annotated bibliography.

    PubMed

    WestRasmus, Emma K; Pineda-Reyes, Fernando; Tamez, Montelle; Westfall, John M

    2012-01-01

    For underserved and disenfranchised communities in the United States, affordable, effective health care can be nearly inaccessible, which often leads to the exclusion of these communities from relevant medical information and care. Barriers to care are especially salient in minority communities, where language, traditions and customs, socioeconomics, and access to education can serve as additional roadblocks to accessing health care information and services. These factors have contributed to a national health disparity crisis that unnecessarily places some communities in a vulnerable position without adequate prevention and treatment opportunities. One solution to the exclusion some communities face in the health care system may be the promotores de salud (PdS)/community health worker (CHW), an approach to culturally competent health care delivery whose popularity in the mainstream health care system has been steadily growing in recent decades. Known by a wide variety of names and broad in the spectrum of health issues they address, the PdS/CHW serves as cultural brokers between their own community and the formal health care system and can play a crucial role in promoting health and wellness within their community. This annotated bibliography was created to educate the reader about the history, definition, key features, utility, outcomes, and broad potential of the CHW approach in a variety of populations. Intended to serve as a reference point to a vast body of information on the CHW/PdS approach, this document is a resource for those wishing to effect change in the disparities within the health care system, and to improve the access to, quality, and cost of health care for underserved patients and their communities. Promotores de Salud is a Spanish term that translates to Health Promoter. A female health worker may be referred to as a Promotora, a male as a Promotor, and the plural of both is Promotores. For the purposes of this bibliography, the terms community

  10. Attitude and knowledge about foot health: a spanish view.

    PubMed

    López-López, Daniel; García-Mira, Ricardo; Palomo-López, Patricia; Sánchez-Gómez, Rubén; Ramos-Galván, José; Tovaruela-Carrión, Natalia; García-Sánchez, Matilde

    2017-04-06

    saúde do pé. os participantes do estudo revelaram uma atitude positiva em relação à saúde do pé e comportamento responsável. explorar las actitudes relacionadas con datos autoinformados sobre las creencias de la salud del pie desde una perspectiva actitudinal. una muestra de 282 participantes edad media 39.46 ± 16.026 acudieron a un centro de salud donde se registraron datos autoinformados de las características demográficas, características clínicas y creencias relacionadas con la salud del pie, completándose todas las etapas del proceso de investigación. los resultados del análisis revelaron una estructura factorial de 8 factores basado en (1) conductas podológicas, (2) la intención de llevar a cabo una conducta de protección, (3) las creencias actitudinales, (4) las creencias normativas, (5) las necesidades, (6) la apatía, (7) el autocuidado, y (8) la percepción general de salud podal. Todos ellos explicaron un 62,78% de la varianza, y fueron considerados como variables independientes en una ecuación de regresión para determinar cuáles de ellos explicaban mejor la importancia atribuida a la salud del pie. los participantes en el estudio revelaron una actitud positiva en relación al cuidado de la salud del pie y al comportamiento responsable.

  11. Oportunidades y Retos Metodológicos en Investigaciones de Salud en el Contexto Carcelario de Puerto Rico

    PubMed Central

    Previdi, Irene Lafarga; Guzzi Vasques, Ana C.; Varas-Díaz, Nelson; Albizu García, Carmen E.

    2017-01-01

    Resumen La población carcelaria de Puerto Rico en 2013 se compone de aproximadamente 13,000 personas. En la literatura no se encuentran documentos que describan los facilitadores y las limitaciones para realizar estudios relacionados con la salud mental en las cárceles. El artículo es una reflexión en torno a situaciones que facilitan o retan la investigación en cárceles según identificaron los/las miembros del equipo de investigación de un proyecto cuyo objetivo era validar una escala para medir estrés en los confinados. En este artículo presentamos elementos facilitadores y retantes del trabajo investigativo en prisión, que sirven para afrontar los retos que presenta este escenario particular. Estas verbalizaciones pueden servir de guía para futuras investigaciones con la población penal. Los hallazgos y recomendaciones preparan al grupo de investigación para afrontar los retos que presenta este escenario particular y a saber cómo maximizar los facilitadores para obtener productos satisfactorios. PMID:28316510

  12. Madres para la Salud: design of a theory-based intervention for postpartum Latinas.

    PubMed

    Keller, Colleen; Records, Kathie; Ainsworth, Barbara; Belyea, Michael; Permana, Paska; Coonrod, Dean; Vega-López, Sonia; Nagle-Williams, Allison

    2011-05-01

    Weight gain in young women suggests that childbearing may be an important contributor to the development of obesity in women. Depressive symptoms can interfere with resumption of normal activity levels following childbirth or with the initiation of or adherence to physical activity programs essential for losing pregnancy weight. Depression symptoms may function directly to promote weight gain through a physiologic mechanism. Obesity and its related insulin resistance may contribute to depressed mood physiologically. Although physical activity has well-established beneficial effects on weight management and depression, women tend to under participate in physical activity during childbearing years. Further, the mechanisms underpinning the interplay of overweight, obesity, physical activity, depression, and inflammatory processes are not clearly explained. This report describes the theoretical rationale, design considerations, and cultural relevance for "Madres para la Salud" [Mothers for Health]. Madres para la Salud is a 12 month prospective, randomized controlled trial exploring the effectiveness of a culturally specific intervention using "bouts" of physical activity to effect changes in body fat, systemic and fat tissue inflammation, and postpartum depression symptoms in sedentary postpartum Latinas. The significance and innovation of Madres para la Salud includes use of a theory-driven approach to intervention, specification and cultural relevance of a social support intervention, use of a Promotora model to incorporate cultural approaches, use of objective measures of physical activity in post partum Latinas women, and the examination of biomarkers indicative of cardiovascular risk related to physical activity behaviors in postpartum Latinas. Copyright © 2011 Elsevier Inc. All rights reserved.

  13. Transferable Training Modules: Building Environmental Education Opportunities With and for Mexican Community Health Workers (Promotores de Salud).

    PubMed

    Ramírez, Denise Moreno; Vea, Lourdes; Field, James A; Baker, Paul B; Gandolfi, A Jay; Maier, Raina M

    Community health workers (promotores de salud) have the ability to empower communities to mitigate negative health outcomes. Current training efforts in environmental topics are lacking. This project addressed this gap by developing 4 transferable training modules on environmental health. By applying a series of surveys, interviews, and trainings, we evaluated their relevance. Partners provided favorable feedback for 3 of the 4 modules. It was also learned that the development method could be improved by engaging technically trained promotores de salud in the role of co-creators. This project has implications for environmental justice communities as it can lessen information disparities.

  14. La contribución de los Centros Colaboradores de la OMS/OPS en los avances de la promoción de la salud en América Latina.

    PubMed

    Arroyo, Hiram V; Mantilla Uribe, Blanca P; Contreras Rengifo, Adolfo; Westphal, Marcia F; Mendes, Rosilda

    2016-09-01

    Los "Centros Colaboradores" de la Organización Mundial de la Salud (OMS) son instituciones designadas para prestar apoyo estratégico en el desarrollo de los objetivos y la ejecución de las actividades de la OMS, y para generar capacidad institucional en países y regiones. En las Américas existen ocho Centros Colaboradores directamente relacionados a la promoción de la salud. Cuatro centros se ubican en Norteamérica y los otros cuatro en América Latina. El propósito de este artículo es describir los Centros Colaboradores de la Región de América Latina. Los centros han sido importantes en el desarrollo de la agenda de promoción de la salud de la región, la consolidación de la estrategia de entornos saludables y el fortalecimiento de las redes académicas y profesionales de promoción de la salud. © The Author(s) 2015.

  15. [Effects of SaludArte program in feeding and nutrition components in school children in Mexico City].

    PubMed

    Shamah-Levy, Teresa; Cuevas-Nasu, Lucía; Gómez-Acosta, Luz María; Morales-Ruan, Ma Del Carmen; Méndez-Gómez Humarán, Ignacio; Robles-Villaseñor, Mara Nadiezhda; Hernández-Ávila, Mauricio

    2017-01-01

    To assess the effect of Education in Nutrition and Food Assistance components of the SaludArte program in participant schools during 2013-2015. A three cohort comparative study was used, with two type of follow-up panel structures: a complete panel and a continuous time, with a total of consisting on 1620 scholar children from 144 schools. Information on food intake, feeding behaviors, food preservation and hygiene, physical activity (PI) and anthropometry was registered. To stablish effect estimates, a difference in difference method combined with propensity score matching was carried out; as an alternative procedure, logistic-multinomial and logistic regression models were also used. Program attributable estimated effects were as follows: an increase in personal hygiene (p=0.045), increase in nutrition knowledges (p=0.003), PI (p=0.002 2013-2014; p=0.032 2015) and increase in fiber Intake (p=0.064). Sugar intake, contrary to the expected showed a significant increase (p=0.012 continuous time and; p=0.037 complete time). SaludArte shows positive effects over some components as expected. However in order to institutionalize the SaludArte program, it is necessary to consider these learned lessons, give it permanence and impulse it in the schools.

  16. HOJA INFORMATIVA Presencia de PFOA y PFOS en el agua potable Avisos de salud

    EPA Pesticide Factsheets

    La EPA estableció avisos de salud sobre el ácido perfluorooctanoico (PFOA) y el sulfonato de perfluorooctano (PFOS) para proporcionar información a los operadores de sistemas de agua potable y funcionarios estatales y locales para que puedan adoptar las me

  17. Salud Tiene Sabor: a model for healthier restaurants in a Latino community.

    PubMed

    Nevarez, Carmen R; Lafleur, Mariah S; Schwarte, Liz U; Rodin, Beth; de Silva, Pri; Samuels, Sarah E

    2013-03-01

    The prevalence of overweight and obesity in children has risen nationally in recent decades, and is exceptionally high in low-income communities of color such as South Los Angeles CA. Independently owned restaurants participating in the Salud Tiene Sabor program at ethnic foods marketplace Mercado La Paloma in South Los Angeles are responding to the childhood obesity crisis by posting calories for menu items and providing nutrition information to patrons. To evaluate whether menu labeling and nutrition information at point of purchase have an influence on availability of healthy food options, patron awareness of calorie information, and restaurant owners' support of the program. A case-study design using mixed methods included restaurant owner and stakeholder interviews, patron surveys, and environmental assessments. Data were collected using originally designed tools, and analyzed in 2009-2011. Healthy eating options were available at the Mercado La Paloma; restaurant owners and the larger community supported the Salud Tiene Sabor program; 33% of patrons reported calorie information-influenced purchase decisions. Owners of independent restaurants have an important role in improving access to healthy foods in low-income, Latino communities. Copyright © 2013 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

  18. United States-Mexico cross-border health insurance initiatives: Salud Migrante and Medicare in Mexico.

    PubMed

    Vargas Bustamante, Arturo; Laugesen, Miriam; Caban, Mabel; Rosenau, Pauline

    2012-01-01

    While U.S. health care reform will most likely reduce the overall number of uninsured Mexican-Americans, it does not address challenges related to health care coverage for undocumented Mexican immigrants, who will remain uninsured under the measures of the reform; documented low-income Mexican immigrants who have not met the five-year waiting period required for Medicaid benefits; or the growing number of retired U.S. citizens living in Mexico, who lack easy access to Medicare-supported services. This article reviews two promising binational initiatives that could help address these challenges-Salud Migrante and Medicare in Mexico; discusses their prospective applications within the context of U.S. health care reform; and identifies potential challenges to their implementation (legal, political, and regulatory), as well as the possible benefits, including coverage of uninsured Mexican immigrants, and their integration into the U.S. health care system (through Salud Migrante), and access to lower-cost Medicare-supported health care for U.S. retirees in Mexico (Medicare in Mexico).

  19. United States-Mexico cross-border health insurance initiatives: Salud Migrante and Medicare in Mexico

    PubMed Central

    Bustamante, Arturo Vargas; Laugesen, Miriam; Caban, Mabel; Rosenau, Pauline

    2014-01-01

    While U.S. health care reform will most likely reduce the overall number of uninsured Mexican-Americans, it does not address challenges related to health care coverage for undocumented Mexican immigrants, who will remain uninsured under the measures of the reform; documented low-income Mexican immigrants who have not met the five-year waiting period required for Medicaid benefits; or the growing number of retired U.S. citizens living in Mexico, who lack easy access to Medicare-supported services. This article reviews two promising binational initiatives that could help address these challenges—Salud Migrante and Medicare in Mexico; discusses their prospective applications within the context of U.S. health care reform; and identifies potential challenges to their implementation (legal, political, and regulatory), as well as the possible benefits, including coverage of uninsured Mexican immigrants, and their integration into the U.S. health care system (through Salud Migrante), and access to lower-cost Medicare-supported health care for U.S. retirees in Mexico (Medicare in Mexico). PMID:22427168

  20. Biosafety evaluation of the DNA extraction protocol for Mycobacterium tuberculosis complex species, as implemented at the Instituto Nacional de Salud, Colombia.

    PubMed

    Castro, Claudia; González, Liliana; Rozo, Juan Carlos; Puerto, Gloria; Ribón, Wellman

    2009-12-01

    Manipulating Mycobacterium tuberculosis clinical specimens and cultures represents a risk factor for laboratory personnel. One of the processes that requires high concentrations of microorganisms is DNA extraction for molecular procedures. Pulmonary tuberculosis cases have occurred among professionals in charge of molecular procedures that require manipulation of massive quantities of microorganisms. This has prompted research studies on biosafety aspects of extraction protocols; however, as yet, no consensus has been reached regarding risks associated with the process. The biosafety was evaluated for the DNA extraction protocol of van Soolingen, et al. 2002 by determining M. tuberculosis viability at each process stage. Eight hundred eighty cultures were grown from 220 M. tuberculosis clinical isolates that had been processed through the first three DNA extraction stages. Molecular identifications of positive cultures used a PCR isolation of a fragment of the heat shock protein PRA-hsp65 and examination of its restriction enzyme profile (spoligotyping). Growth was seen in one culture with one of the procedures used. The molecular characterization did not correspond to the initially analyzed isolate, and therefore was deduced to be the product of a cross-contamination. The DNA extraction protocol, as described by van Soolingen, et al. 2002 and as implemented at the Instituto Nacional de Salud, was established to be safe for laboratory personnel as well as for the environment.

  1. Promotora de salud: promoting folic acid use among Hispanic women.

    PubMed

    deRosset, Leslie; Mullenix, Amy; Flores, Alina; Mattia-Dewey, Daniel; Mai, Cara T

    2014-06-01

    The U.S. Public Health Service recommends that all women in the United States capable of becoming pregnant consume 400 μg of folic acid daily to reduce their risk of having a pregnancy affected by a neural tube defect (NTD). However, disparities exist in the consumption of folic acid, with Hispanic women having lower rates of folic acid consumption than non-Hispanic white women. A community-based feasibility study was designed to assess the utility of the promotora de salud model to promote consumption of multivitamins containing folic acid for the prevention of NTDs among Spanish-speaking Hispanic women in North Carolina. The study consisted of an educational intervention given by a promotora (a lay, community health worker), with data collection occurring at baseline and four months post-intervention to measure changes in knowledge and behavior. Overall, 52% (n=303) of participants completed all components of the study. Self-reported daily multivitamin consumption increased from 24% at baseline to 71% four months post-intervention. During the same time frame, awareness of folic acid increased from 78% to 98% and knowledge of the role of folic acid in the prevention of birth defects increased from 82% to 92%. The results of this study indicate that the promotora de salud model may be effective in reaching a subpopulation of women with the folic acid message. Additional studies with larger population sizes are warranted to validate these findings.

  2. Desarrollo de la Escala sobre el Estigma Relacionado con el VIH/SIDA para Profesionales de la Salud mediante el uso de métodos mixtos123

    PubMed Central

    Varas-Díaz, Nelson; Neilands, Torsten B.; Guilamo-Ramos, Vincent; Cintrón Bou, Francheska N.

    2009-01-01

    El estigma relacionado con el VIH/SIDA continúa siendo un obstáculo para la prevención primaria y secundaria del VIH. Las consecuencias para las personas que viven con la enfermedad han sido muy documentadas y continúan siendo una gran preocupación para las personas que proveen servicios de salud y para aquellas que investigan el tema. Estas consecuencias son preocupantes cuando el estigma emana de profesionales de la salud porque se puede limitar el acceso a los servicios. Uno de los principales obstáculos para la investigación del estigma relacionado con el VIH en Puerto Rico es la falta de instrumentos cuantitativos para evaluar las manifestaciones del estigma entre profesionales de la salud. El objetivo principal de este estudio fue desarrollar y probar las propiedades psicométricas de una escala sobre el estigma relacionado con el VIH/SIDA culturalmente apropiada para personas que proveen servicios de salud puertorriqueñas y desarrollar una versión corta de la escala que pudiera usarse en escenarios clínicos con tiempo limitado. El instrumento desarrollado estuvo basado en evidencia cualitativa recopilada entre profesionales y estudiantes de profesiones de la salud puertorriqueños/as (n=80) y administrado a una muestra de 421 profesionales de la salud en adiestramiento. La escala contenía 12 dimensiones del estigma relacionado con el VIH/SIDA. El análisis cuantitativo corroboró 11 de ellas, teniendo como resultado un instrumento con validez y confiabilidad satisfactoria. Estas dimensiones, a su vez, fueron subcomponentes de un factor de estigma general superior. PMID:20333258

  3. SaludABLEOmaha: improving readiness to address obesity through healthy lifestyle in a Midwestern Latino community, 2011-2013.

    PubMed

    Frerichs, Leah; Brittin, Jeri; Robbins, Regina; Steenson, Sharalyn; Stewart, Catherine; Fisher, Christopher; Huang, Terry T-K

    2015-02-12

    A community's readiness for change is a precursor to the effective application of evidence-based practices for health promotion. Research is lacking regarding potential strategies to improve readiness to address obesity-related health issues in underserved communities. This case study describes SaludABLEOmaha, an initiative to increase readiness of residents in a Midwestern Latino community to address obesity and adopt healthy lifestyles. SaludABLEOmaha emphasized 2 core approaches, youth activism and collaboration among public and private institutions, which we applied to planning and implementing tactics in support of 3 interconnected strategies: 1) social marketing and social media, 2) service learning in schools (ie, curricula that integrate hands-on community service with instruction and reflection), and 3) community and business engagement. Following the Community Readiness Model protocol (http://triethniccenter.colostate.edu/communityReadiness.htm), structured interviews were conducted with community leaders and analyzed before and 2.5 years after launch of the program. The community increased in readiness from stage 3 of the Community Readiness Model, "vague awareness," at baseline to stage 5, "preparation," at follow-up. SaludABLEOmaha improved community readiness (eg, community knowledge, community climate), which probably contributed to the observed increase in readiness to address obesity through healthy lifestyle. Community mobilization approaches such as youth activism integrated with social marketing and social media tactics can improve community responsiveness to obesity prevention and diminish health disparities.

  4. Comunicación y empoderamiento ciudadano en salud: un caso de investigación-acción en la Venezuela polarizada

    PubMed Central

    NAHÓN SERFATY, Isaac; EID, Mahmoud

    2016-01-01

    En el marco de un proyecto de investigación-acción que se implementó en Venezuela de 2009 a 2013 se buscó empoderar (empower) a activistas sociales y pacientes en la lucha contra el cáncer de mama (CM). Este proyecto se puso en marcha en un contexto de alta polarización política y social en el marco de la llamada «Revolución bolivariana». A partir de una perspectiva ecológica de la comunicación y el activismo en salud, que integra los niveles interpersonal, grupal y social, se celebraron una serie de actividades orientadas a desarrollar las habilidades de vocería de ciudadanos, especialmente de mujeres, y ampliar las redes de cooperación entre diversos sectores, al mismo tiempo que se perfiló una visión consensuada entre actores sociales e institucionales sobre una respuesta nacional contra el CM. Una comunicación horizontal y participativa permitió que se escuchara la voz de actores usualmente marginalizados en las políticas sanitarias. PMID:27867911

  5. SaludableOmaha: development of a youth advocacy initiative to increase community readiness for obesity prevention, 2011-2012.

    PubMed

    Frerichs, Leah; Brittin, Jeri; Stewart, Catherine; Robbins, Regina; Riggs, Cara; Mayberger, Susan; Cervantes, Alberto; Huang, Terry T-K

    2012-01-01

    Childhood obesity rates in minority populations continue to rise despite leveling national trends. Although interventions that address social and environmental factors exist, processes that create demand for policy and environmental change within communities have not been identified. We developed a pilot program in South Omaha, a Nebraska Latino community, based on the community readiness model (CRM), called SaludableOmaha. We used CRM to explore the potential of youth advocacy to shift individual and community norms regarding obesity prevention in South Omaha and to advocate for health-promoting community environments. We used CRM to assess supply and demand for health programs, engage the community, determine the community's baseline readiness to address childhood obesity, and guide youth advocacy program development. We conducted our project in 2 phases. In the first, we trained a cohort of youth. In the second, the youth cohort created and launched a Latino health movement, branded as SaludableOmaha. A third phase, which is currently under way, is directed at institutionalizing youth advocacy in communities. At baseline, the community studied was at a low stage of readiness for change. Our program generated infrastructure and materials to support the growth and institutionalization of youth advocacy as a means of increasing community readiness for addressing obesity prevention. CRM is an important tool for addressing issues such as childhood obesity in underserved communities because it provides a framework for matching interventions to the community. Community partnerships such as SaludableOmaha can aid the adoption of obesity prevention programs.

  6. BIOÉTICA EN NICARAGUA

    PubMed Central

    Gonzálezy, Armando Ulloa; Monge, Melba de la Cruz Barrantes

    2009-01-01

    Este trabajo describe la situación de la bioética en Nicaragua, caracterizando las circunstancias y el contexto de las actividades de educación médica y las unidades prestadoras de servicios de salud. El desarrollo de un nuevo modelo de atención integral en salud, la implementación de políticas de salud que garanticen a la población el mayor acceso y gratuidad a los servicios, y los cambios acontecidos en los cuidados médicos, debidos en parte al reconocimiento creciente de una mayor autonomía de los pacientes y al uso creciente de nuevas tecnologías médicas, hace que se presenten algunas limitantes y dilemas en las unidades asistenciales y entre el personal de salud. La bioética en Nicaragua tiene un desarrollo incipiente: no está institucionalizada ni se han previsto los mecanismos formales que permitan resolver los problemas éticamente complejos, por lo tanto, constituye un gran reto por parte de las instituciones educativas y rectoras de la salud. PMID:20352016

  7. PubMed

    Beas, Renato; Anduaga-Beramendi, Alexander; Maticorena-Quevedo, Jesus; Mayta-Tristán, Percy

    2018-03-26

    Objetivo: Identificar los factores asociados al Síndrome de Burnout (SB) en trabajadores de salud del Perú en el año 2014.Métodos: Estudio transversal analítico mediante un análisis secundario de la Encuesta Nacional de Usuarios de Salud del año 2014 en Perú. El SB fue medido mediante el Maslach Burnout Inventory - Human Services Survey (MBI-HSS). Se realizó un análisis descriptivo, también un análisis bivariado y multivariado calculando los valores de p y los OR crudos y ajustados mediante Regresión Logística.Resultados: La prevalencia del SB en los profesionales de la salud fue 2,8%, encontrándose asociadas las variables: género, tiempo en el sector salud, horas de trabajo e ingreso mensual total.Conclusiones: Se encontró que los factores asociados al SB en el personal de Perú en el año 2014 fueron el género, el tiempo en el sector salud, las horas de trabajo y el ingreso mensual total.

  8. NutriNet-Salud México. Prospective study online: 2018-2028. Relationship between nutrition and health and determinants of dietary habits and nutritional status.

    PubMed

    Barriguete-Meléndez, Jorge Armando; Hercberg, Serge; Galán, Pilar; Parodi, André; Baulieux, Jacques

    2018-01-01

    NutriNet-Salud Mexico is a digital health information system, e-epidemiology instrument, online, open and free, to recording and analysis the determinants of dietary habits and nutritional status of the Mexican population, for the prevention of overweight, obesity and noncommunicable diseases for the period 2018-2028. Describe the design, development and implementation of NutriNet-Salud Mexico from the French model NutriNet-Santé France 2008-2018. NutriNet-Salud Mexico platform is the basis for the development of health information system for prospective cohort study, scheduled for a period of 10 years (2018-2028), with a dedicated website, and its development will enable to have multiple study populations within an initial set of five self-applicable questionnaires validated in Mexican population. The information will enable to develop applied research, learn and monitor food contributions and nutritional status of the population, assess the impact of public health actions on feeding behavior and nutritional status, comparing populations between countries (Mexico, France, Belgium and Switzerland) and national institutes, universities and states. NutriNet-Salud Mexico will provide information for assist in research and public action, especially to guide public policies on nutrition Mexico. The scientific elements will make appropriate nutritional recommendations to different populations and access to a representative nominal population sample with low-cost, in real-time, and with dual approach to e-epidemiology: cohort study to identify causality and cross-sectional studies (descriptive research, monitoring and evaluation). Copyright: © 2018 Permanyer.

  9. SaludABLEOmaha: Improving Readiness to Address Obesity Through Healthy Lifestyle in a Midwestern Latino Community, 2011–2013

    PubMed Central

    Frerichs, Leah; Brittin, Jeri; Robbins, Regina; Steenson, Sharalyn; Stewart, Catherine; Fisher, Christopher

    2015-01-01

    Background A community’s readiness for change is a precursor to the effective application of evidence-based practices for health promotion. Research is lacking regarding potential strategies to improve readiness to address obesity-related health issues in underserved communities. Community Context This case study describes SaludABLEOmaha, an initiative to increase readiness of residents in a Midwestern Latino community to address obesity and adopt healthy lifestyles. Methods SaludABLEOmaha emphasized 2 core approaches, youth activism and collaboration among public and private institutions, which we applied to planning and implementing tactics in support of 3 interconnected strategies: 1) social marketing and social media, 2) service learning in schools (ie, curricula that integrate hands-on community service with instruction and reflection), and 3) community and business engagement. Following the Community Readiness Model protocol (http://triethniccenter.colostate.edu/communityReadiness.htm), structured interviews were conducted with community leaders and analyzed before and 2.5 years after launch of the program. Outcome The community increased in readiness from stage 3 of the Community Readiness Model, “vague awareness,” at baseline to stage 5, “preparation,” at follow-up. Interpretation SaludABLEOmaha improved community readiness (eg, community knowledge, community climate), which probably contributed to the observed increase in readiness to address obesity through healthy lifestyle. Community mobilization approaches such as youth activism integrated with social marketing and social media tactics can improve community responsiveness to obesity prevention and diminish health disparities. PMID:25674679

  10. Cobertura de los sistemas de pensiones y factores asociados al acceso a una pensión de jubilación en México

    PubMed Central

    Murillo-López, Sandra; Venegas-Martínez, Francisco

    2016-01-01

    Resumen Objetivos: obtener estimaciones de indicadores de cobertura de las pensiones por jubilación o retiro para la población mexicana de 65 y más años, y evaluar el impacto que tienen los sistemas de pensiones en las transiciones al retiro de los adultos en edades medias y avanzadas en México. Para ello se utilizan datos microeconómicos provenientes de la Encuesta Nacional de Salud y Envejecimiento. Mediante análisis econométrico se identifican los factores sociodemográficos, económicos, laborales e institucionales que están asociados al acceso a una pensión de jubilación, o bien, a la dependencia de otras fuentes de ingresos. Se encontró que, en México, las transiciones al retiro del mercado de trabajo en las etapas avanzadas del ciclo de vida son limitadas debido a las características eminentemente contributivas de los esquemas de pensiones, los cuales favorecen a la población con trayectorias laborales formales y más estables asociadas a: características de género, oportunidades educativas y posibilidades de inserción en el mercado laboral. PMID:27524936

  11. SaludableOmaha: Development of a Youth Advocacy Initiative to Increase Community Readiness for Obesity Prevention, 2011–2012

    PubMed Central

    Frerichs, Leah; Brittin, Jeri; Stewart, Catherine; Robbins, Regina; Riggs, Cara; Mayberger, Susan; Cervantes, Alberto

    2012-01-01

    Background Childhood obesity rates in minority populations continue to rise despite leveling national trends. Although interventions that address social and environmental factors exist, processes that create demand for policy and environmental change within communities have not been identified. Community Context We developed a pilot program in South Omaha, a Nebraska Latino community, based on the community readiness model (CRM), called SaludableOmaha. We used CRM to explore the potential of youth advocacy to shift individual and community norms regarding obesity prevention in South Omaha and to advocate for health-promoting community environments. Methods We used CRM to assess supply and demand for health programs, engage the community, determine the community’s baseline readiness to address childhood obesity, and guide youth advocacy program development. We conducted our project in 2 phases. In the first, we trained a cohort of youth. In the second, the youth cohort created and launched a Latino health movement, branded as SaludableOmaha. A third phase, which is currently under way, is directed at institutionalizing youth advocacy in communities. Outcome At baseline, the community studied was at a low stage of readiness for change. Our program generated infrastructure and materials to support the growth and institutionalization of youth advocacy as a means of increasing community readiness for addressing obesity prevention. Interpretation CRM is an important tool for addressing issues such as childhood obesity in underserved communities because it provides a framework for matching interventions to the community. Community partnerships such as SaludableOmaha can aid the adoption of obesity prevention programs. PMID:23217590

  12. A Path Analysis of a Randomized "Promotora de Salud" Cardiovascular Disease-Prevention Trial among At-Risk Hispanic Adults

    ERIC Educational Resources Information Center

    de Heer, Hendrik Dirk; Balcazar, Hector G.; Castro, Felipe; Schulz, Leslie

    2012-01-01

    This study assessed effectiveness of an educational community intervention taught by "promotoras de salud" in reducing cardiovascular disease (CVD) risk among Hispanics using a structural equation modeling (SEM) approach. Model development was guided by a social ecological framework proposing CVD risk reduction through improvement of…

  13. Amor y Salud (Love and Health): a preconception health campaign for second-generation Latinas in Oregon.

    PubMed

    Dixon-Gray, Lesa A; Mobley, Allison; McFarlane, Julie M; Rosenberg, Kenneth D

    2013-01-01

    To develop, and implement, a social marketing campaign to increase preconception health knowledge among second-generation Latinas in Oregon. Social marketing demonstration project. Latino communities in five Oregon counties. Target populations included young Latinas (18-29 years old) born in the United States of immigrant parents in five Oregon counties, and their family members. Intervention. A radionovela, Amor y Salud, was developed that featured a Latina and her fiancé preparing for marriage and family. Social media, Web sites, and culturally relevant print materials promoted the radio campaign. Process data, social media metrics, Google analytics, online and intercept surveys were collected. Basic frequencies and descriptive statistics were used. Twelve episodes were produced in English and Spanish and played on nine radio stations a total of 2098 times. The Facebook page was viewed 11,000 times, and radionovela episodes were played a total of 776 times. Amor y Salud used mixed media--radio, social media, print materials--to encourage Latinas to consider their preconception health. Anecdotally, we heard positive comments from community members and local media regarding the radionovela; however, evaluation challenges prevent us from saying conclusively that knowledge on this topic increased.

  14. Synthesizing (ZrAl3 + AlN)/Mg-Al composites by a 'matrix exchange' method

    NASA Astrophysics Data System (ADS)

    Gao, Tong; Li, Zengqiang; Hu, Kaiqi; Han, Mengxia; Liu, Xiangfa

    2018-06-01

    A method named 'matrix exchange' to synthesize ZrAl3 and AlN reinforced Mg-Al composite was developed in this paper. By inserting Al-10ZrN master alloy into Mg matrix and reheating the cooled ingot to 550 °C, Al and Mg atoms diffuse to the opposite side. As a result, liquid melt occurs once the interface areas reach to proper compositions. Then dissolved Al atoms react with ZrN, leading to the in-situ formation of ZrAl3 and AlN particles, while the Al matrix is finally replaced by Mg. This study provides a new insight for preparing Mg composites.

  15. Effectiveness of a Brief Home Parenting Intervention for Reducing Early Sexual Risks among Latino Adolescents: "Salud y Éxito"

    ERIC Educational Resources Information Center

    O'Donnell, Lydia; Fuxman, Shai

    2017-01-01

    Background: Teen pregnancy rates and related risks remain elevated among Latino teens. We tested the impact on youth sexual behaviors of a brief, culturally targeted, bilingual media intervention designed for parents of young adolescents. Methods: "Salud y éxito" (Health & Success) uses dramatic audio stories to model positive…

  16. Madres para la Salud: Design of a Theory-based Intervention for Postpartum Latinas

    PubMed Central

    Keller, Colleen; Records, Kathie; Ainsworth, Barbara; Belyea, Michael; Permana, Paska; Coonrod, Dean; Vega-López, Sonia; Nagle-Williams, Allison

    2011-01-01

    Background Weight gain in young women suggests that childbearing may be an important contributor to the development of obesity in women. Depressive symptoms can interfere with resumption of normal activity levels following childbirth or with the initiation of or adherence to physical activity programs essential for losing pregnancy weight. Depression symptoms may function directly to promote weight gain through a physiologic mechanism. Obesity and its related insulin resistance may contribute to depressed mood physiologically. Although physical activity has well-established beneficial effects on weight management and depression, women tend to under participate in physical activity during childbearing years. Further, the mechanisms underpinning the interplay of overweight, obesity, physical activity, depression, and inflammatory processes are not clearly explained. Objectives This report describes the theoretical rationale, design considerations, and cultural relevance for “Madres para la Salud” [Mothers for Health]. Design and Methods Madres para la Salud is a 12 month prospective, randomized controlled trial exploring the effectiveness of a culturally specific intervention using “bouts” of physical activity to effect changes in body fat, systemic and fat tissue inflammation, and postpartum depression symptoms in sedentary postpartum Latinas. Summary The significance and innovation of Madres para la Salud includes use of a theory-driven approach to intervention, specification and cultural relevance of a social support intervention, use of a Promotora model to incorporate cultural approaches, use of objective measures of physical activity in post partum Latinas women, and the examination of biomarkers indicative of cardiovascular risk related to physical activity behaviors in postpartum Latinas. PMID:21238614

  17. Evaluation of Salud Para Su Corazón (Health for your Heart) -- National Council of La Raza Promotora Outreach Program.

    PubMed

    Balcázar, Héctor; Alvarado, Matilde; Hollen, Mary Luna; Gonzalez-Cruz, Yanira; Pedregón, Verónica

    2005-07-01

    In 2001, the National Heart, Lung, and Blood Institute partnered with the National Council of La Raza to conduct a pilot test of its community-based outreach program Salud Para Su Corazón (Health for Your Heart), which aims to reduce the burden of morbidity and mortality associated with cardiovascular disease among Latinos. The effectiveness of promotores de salud (community health workers) in improving heart-healthy behaviors among Latino families participating in the pilot program at seven sites was evaluated. Data on the characteristics of the promotores in the Salud Para Su Corazón program were compiled. Promotores collected data on family risk factors, health habits, referrals and screenings, information sharing, and program satisfaction from 223 participating Latino families (320 individual family members) through questionnaires. Paired t tests and chi-square tests were used to measure pretest-posttest differences among program participants. Results demonstrated the effectiveness of the promotora model in improving heart-healthy behaviors, promoting community referrals and screenings, enhancing information sharing beyond families, and satisfying participants' expectations of the program. The main outcome of interest was the change in heart-healthy behaviors among families. The community outreach model worked well in the seven pilot programs because of the successes of the promotores and the support of the community-based organizations. Successes stemmed in part from the train-the-trainer approach. Promotoria, as implemented in this program, has the potential to be integrated with a medical model of patient care for primary, secondary, and tertiary prevention.

  18. Salud Para Su Corazon (health for your heart) community health worker model: community and clinical approaches for addressing cardiovascular disease risk reduction in Hispanics/Latinos.

    PubMed

    Balcazar, H; Alvarado, M; Ortiz, G

    2011-01-01

    This article describes 6 Salud Para Su Corazon (SPSC) family of programs that have addressed cardiovascular disease risk reduction in Hispanic communities facilitated by community health workers (CHWs) or Promotores de Salud (PS). A synopsis of the programs illustrates the designs and methodological approaches that combine community-based participatory research for 2 types of settings: community and clinical. Examples are provided as to how CHWs can serve as agents of change in these settings. A description is presented of a sustainability framework for the SPSC family of programs. Finally, implications are summarized for utilizing the SPSC CHW/PS model to inform ambulatory care management and policy.

  19. A Process Evaluation of an Efficacious Family-Based Intervention to Promote Healthy Eating: The "Entre Familia: Reflejos de Salud" Study

    ERIC Educational Resources Information Center

    Schmied, Emily; Parada, Humberto; Horton, Lucy; Ibarra, Leticia; Ayala, Guadalupe

    2015-01-01

    "Entre Familia: Reflejos de Salud" was a successful family-based randomized controlled trial designed to improve dietary behaviors and intake among U.S. Latino families, specifically fruit and vegetable intake. The novel intervention design merged a community health worker ("promotora") model with an entertainment-education…

  20. Magnetism of Al-substituted magnetite reduced from Al-hematite

    NASA Astrophysics Data System (ADS)

    Jiang, Zhaoxia; Liu, Qingsong; Zhao, Xiang; Roberts, Andrew P.; Heslop, David; Barrón, Vidal; Torrent, José

    2016-06-01

    Aluminum-substituted magnetite (Al-magnetite) reduced from Al-substituted hematite or goethite (Al-hematite or Al-goethite) is an environmentally important constituent of magnetically enhanced soils. In order to characterize the magnetic properties of Al-magnetite, two series of Al-magnetite samples were synthesized through reduction of Al-hematite by a mixed gas (80% CO2 and 20% CO) at 395°C for 72 h in a quartz tube furnace. Al-magnetite samples inherited the morphology of their parent Al-hematite samples, but only those transformed from Al-hematite synthesized at low temperature possessed surficial micropores, which originated from the release of structural water during heating. Surface micropores could thus serve as a practical fingerprint of fire or other high-temperature mineralogical alteration processes in natural environments, e.g., shear friction in seismic zones. In addition, Al substitution greatly affects the magnetic properties of Al-magnetite. For example, coercivity (Bc) increases with increasing Al content and then decreases slightly, while the saturation magnetization (Ms), Curie temperature (Tc), and Verwey transition temperature (Tv) all decrease with increasing Al content due to crystal defect formation and dilution of magnetic ions caused by Al incorporation. Moreover, different trends in the correlation between Tc and Bc can be used to discriminate titanomagnetite from Al-magnetite, which is likely to be important in environmental and paleomagnetic studies, particularly in soil.

  1. Familial ALS

    PubMed Central

    Boylan, Kevin

    2015-01-01

    Synopsis Genes linked to ALS susceptibility are being identified at an increasing rate owing to advances in molecular genetic technology. Genetic mechanisms in ALS pathogenesis appear to exert major effects in ~10% of patients, but genetic factors at some level may be important components of disease risk in most ALS patients. Identification of gene variants associated with ALS has informed concepts of the pathogenesis of ALS, aided the identification of therapeutic targets, facilitated research to develop new ALS biomarkers, and supported the establishment of clinical diagnostic tests for ALS-linked genes. Translation of this knowledge to ALS therapy development is ongoing. PMID:26515623

  2. Ab initio modeling of zincblende AlN layer in Al-AlN-TiN multilayers

    DOE PAGES

    Yadav, S. K.; Wang, J.; Liu, X. -Y.

    2016-06-13

    An unusual growth mechanism of metastable zincblende AlN thin film by diffusion of nitrogen atoms into Al lattice is established. Using first-principles density functional theory, we studied the possibility of thermodynamic stability of AlN as a zincblende phase due to epitaxial strains and interface effect, which fails to explain the formation of zincblende AlN. We then compared the formation energetics of rocksalt and zincblende AlN in fcc Al through direct diffusion of nitrogen atoms to Al octahedral and tetrahedral interstitials. Furthermore, the formation of a zincblende AlN thin film is determined to be a kinetically driven process, not a thermodynamicallymore » driven process.« less

  3. Interfacial characterization of Al-Al thermocompression bonds

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Malik, N., E-mail: nishantmalik1987@gmail.com; SINTEF ICT, Department of Microsystems and Nanotechnology, P.O. Box 124 Blindern, N-0314 Oslo; Carvalho, P. A.

    2016-05-28

    Interfaces formed by Al-Al thermocompression bonding were studied by the transmission electron microscopy. Si wafer pairs having patterned bonding frames were bonded using Al films deposited on Si or SiO{sub 2} as intermediate bonding media. A bond force of 36 or 60 kN at bonding temperatures ranging from 400–550 °C was applied for a duration of 60 min. Differences in the bonded interfaces of 200 μm wide sealing frames were investigated. It was observed that the interface had voids for bonding with 36 kN at 400 °C for Al deposited both on Si and on SiO{sub 2}. However, the dicing yield was 33% for Al onmore » Si and 98% for Al on SiO{sub 2}, attesting for the higher quality of the latter bonds. Both a bond force of 60 kN applied at 400 °C and a bond force of 36 kN applied at 550 °C resulted in completely bonded frames with dicing yields of, respectively, 100% and 96%. A high density of long dislocations in the Al grains was observed for the 60 kN case, while the higher temperature resulted in grain boundary rotation away from the original Al-Al interface towards more stable configurations. Possible bonding mechanisms and reasons for the large difference in bonding quality of the Al films deposited on Si or SiO{sub 2} are discussed.« less

  4. Thermal Modeling of Al-Al and Al-Steel Friction Stir Spot Welding

    NASA Astrophysics Data System (ADS)

    Jedrasiak, P.; Shercliff, H. R.; Reilly, A.; McShane, G. J.; Chen, Y. C.; Wang, L.; Robson, J.; Prangnell, P.

    2016-09-01

    This paper presents a finite element thermal model for similar and dissimilar alloy friction stir spot welding (FSSW). The model is calibrated and validated using instrumented lap joints in Al-Al and Al-Fe automotive sheet alloys. The model successfully predicts the thermal histories for a range of process conditions. The resulting temperature histories are used to predict the growth of intermetallic phases at the interface in Al-Fe welds. Temperature predictions were used to study the evolution of hardness of a precipitation-hardened aluminum alloy during post-weld aging after FSSW.

  5. Proton irradiation studies on Al and Al5083 alloy

    NASA Astrophysics Data System (ADS)

    Bhattacharyya, P.; Gayathri, N.; Bhattacharya, M.; Gupta, A. Dutta; Sarkar, Apu; Dhar, S.; Mitra, M. K.; Mukherjee, P.

    2017-10-01

    The change in the microstructural parameters and microhardness values in 6.5 MeV proton irradiated pure Al and Al5083 alloy samples have been evaluated using different model based techniques of X-ray diffraction Line Profile Analysis (XRD) and microindendation techniques. The detailed line profile analysis of the XRD data showed that the domain size increases and saturates with irradiation dose both in the case of Al and Al5083 alloy. The corresponding microstrain values did not show any change with irradiation dose in the case of the pure Al but showed an increase at higher irradiation doses in the case of Al5083 alloy. The microindendation results showed that unirradiated Al5083 alloy has higher hardness value compared to that of unirradiated pure Al. The hardness increased marginally with irradiation dose in the case of Al5083, whereas for pure Al, there was no significant change with dose.

  6. Combustion synthesis of AlB2-Al2O3 composite powders with AlB2 nanowire structures

    NASA Astrophysics Data System (ADS)

    Yang, Pan; Xiao, Guoqing; Ding, Donghai; Ren, Yun; Yang, Shoulei; Lv, Lihua; Hou, Xing

    2018-05-01

    Using of Al and B2O3 powders as starting materials, and Mg-Al alloy as additives, AlB2-Al2O3 composite powders with AlB2 nanowire structures were successfully fabricated via combustion synthesis method in Ar atmosphere at a pressure of 1.5 MPa. The effect of different amount of Mg-Al alloy on the phase compositions and morphology of the combustion products was investigated. The results revealed that AlB2 and Al2O3 increased, whereas Al decreased with the content of Mg-Al alloy increasing. The impurities MgAl2O4 and AlB12 would exist in the sample with adding of 18 wt% Mg-Al alloy. Interestingly, FESEM/TEM/EDS results showed that AlB2 nanowires were observed in the products when the content of Mg-Al alloy is 6 wt% and 12 wt%. The more AlB2 nanowires can be found as the content of Mg-Al alloy increased. And the yield of AlB2 nanowires with the diameter of about 200 nanometers (nm) and the length up to several tens of micrometers (μm) in the combustion product is highest when the content of Mg-Al alloy is 12 wt%. The vapor, such as Mg-Al (g), B2O2 (g), AlO (g) and Al2O (g), produced during the process of combustion synthesis, reacted with each other to yield AlB2 nanowires by vapor-solid (VS) mechanism and the corresponding model was also proposed.

  7. Interfacial Phenomena in Al/Al, Al/Cu, and Cu/Cu Joints Soldered Using an Al-Zn Alloy with Ag or Cu Additions

    NASA Astrophysics Data System (ADS)

    Pstruś, Janusz; Gancarz, Tomasz

    2014-05-01

    The studies of soldered joints were carried out in systems: Al/solder/Al, Al/solder/Cu, Cu/solder/Cu, where the solder was (Al-Zn)EUT, (Al-Zn)EUT with 0.5, 1.0, and 1.5 at.% of Ag and (Al-Zn)EUT with 0.5, 1.0, and 1.5 at.% of Cu addition. Brazing was performed at 500 °C for 3 min. The EDS analysis indicated that the composition of the layers starting from the Cu pad was CuZn, Cu5Zn8, and CuZn4, respectively. Wetting tests were performed at 500 °C for 3, 8, 15, and 30 min, respectively. Thickness of the layers and their kinetics of growth were measured based on the SEM micrographs. The formation of interlayers was not observed from the side of Al pads. On the contrary, dissolution of the Al substrate and migration of Al-rich particles into the bulk of the solder were observed.

  8. Orientation relationship of eutectoid FeAl and FeAl2.

    PubMed

    Scherf, A; Kauffmann, A; Kauffmann-Weiss, S; Scherer, T; Li, X; Stein, F; Heilmaier, M

    2016-04-01

    Fe-Al alloys in the aluminium range of 55-65 at.% exhibit a lamellar microstructure of B2-ordered FeAl and triclinic FeAl 2 , which is caused by a eutectoid decomposition of the high-temperature Fe 5 Al 8 phase, the so-called ∊ phase. The orientation relationship of FeAl and FeAl 2 has previously been studied by Bastin et al. [ J. Cryst. Growth (1978 ▸), 43 , 745] and Hirata et al. [ Philos. Mag. Lett. (2008 ▸), 88 , 491]. Since both results are based on different crystallographic data regarding FeAl 2 , the data are re-evaluated with respect to a recent re-determination of the FeAl 2 phase provided by Chumak et al. [ Acta Cryst. (2010 ▸), C 66 , i87]. It is found that both orientation relationships match subsequent to a rotation operation of 180° about a 〈112〉 crystallographic axis of FeAl or by applying the inversion symmetry of the FeAl 2 crystal structure as suggested by the Chumak data set. Experimental evidence for the validity of the previously determined orientation relationships was found in as-cast fully lamellar material (random texture) as well as directionally solidified material (∼〈110〉 FeAl || solidification direction) by means of orientation imaging microscopy and global texture measurements. In addition, a preferential interface between FeAl and FeAl 2 was identified by means of trace analyses using cross sectioning with a focused ion beam. On the basis of these habit planes the orientation relationship between the two phases can be described by ([Formula: see text]01) FeAl || (114)[Formula: see text] and [111] FeAl || [1[Formula: see text]0][Formula: see text]. There is no evidence for twinning within FeAl lamellae or alternating orientations of FeAl lamellae. Based on the determined orientation and interface data, an atomistic model of the structure relationship of Fe 5 Al 8 , FeAl and FeAl 2 in the vicinity of the eutectoid decomposition is derived. This model is analysed with respect to the strain which has to be

  9. Ohmic contacts to Al-rich AlGaN heterostructures

    DOE PAGES

    Douglas, E. A.; Reza, S.; Sanchez, C.; ...

    2017-06-06

    Due to the ultra-wide bandgap of Al-rich AlGaN, up to 5.8 eV for the structures in this study, obtaining low resistance ohmic contacts is inherently difficult to achieve. A comparative study of three different fabrication schemes is presented for obtaining ohmic contacts to an Al-rich AlGaN channel. Schottky-like behavior was observed for several different planar metallization stacks (and anneal temperatures), in addition to a dry-etch recess metallization contact scheme on Al 0.85Ga 0.15N/Al 0.66Ga 0.34N. However, a dry etch recess followed by n +-GaN regrowth fabrication process is reported as a means to obtain lower contact resistivity ohmic contacts onmore » a Al 0.85Ga 0.15N/Al 0.66Ga 0.34N heterostructure. In conclusion, specific contact resistivity of 5×10 -3 Ω cm 2 was achieved after annealing Ti/Al/Ni/Au metallization.« less

  10. Growth and stress-induced transformation of zinc blende AlN layers in Al-AlN-TiN multilayers

    DOE PAGES

    Li, Nan; Yadav, Satyesh K.; Wang, Jian; ...

    2015-12-18

    We report that AlN nanolayers in sputter deposited {111}Al/AlN/TiN multilayers exhibit the metastable zinc-blende-structure (z-AlN). Based on density function theory calculations, the growth of the z-AlN is ascribed to the kinetically and energetically favored nitridation of the deposited aluminium layer. In situ nanoindentation of the as-deposited {111}Al/AlN/TiN multilayers in a high-resolution transmission electron microscope revealed the z-AlN to wurzite AlN phase transformation through collective glide of Shockley partial dislocations on every two {111} planes of the z-AlN.

  11. Innovations in graduate public health education: the Instituto Nacional de Salud Pública.

    PubMed

    Valladares, Laura Magaña; Ávila, Mauricio Hernández

    2015-03-01

    During the past 10 years, the Instituto Nacional de Salud Pública (National Institute of Public Health) in Mexico has meticulously revised its educational model. This analysis resulted in the transformation of its educational model by tracing a new path in the pedagogical structure and faculty development to meet current challenges and students' needs. The first stage dealt with the national and international accreditation standards that came with the 21st century. The second stage responded to evidence of cognitive research showing that students are better prepared when they are engaged, active, and responsible for their own learning. This transformation was grounded on the use of information and communication technologies and on a competency-based educational approach that has led the expansion and innovation of educational practice.

  12. An Eco-hydrologic Assessment of Small Experimental Catchments with Various Land Uses within the Panama Canal Watershed: Agua Salud Project

    NASA Astrophysics Data System (ADS)

    Crouch, T. D.; Ogden, F. L.; Stallard, R. F.; Smithsonian Tropical Research Institute, Panama Canal Watershed Experiment, Agua Salud Project

    2010-12-01

    Hydrological processes in the humid tropics are poorly understood and an important topic when it comes to water management in the seasonal tropics. The Smithsonian Tropical Research Institute, Panama Canal Watershed Experiment, Agua Salud Project, seeks to understand these processes and quantify the long-term effects of different land cover and uses across the Panama Canal Watershed. One of the project’s main objectives is to understand how reforestation effects seasonal stream flows. To meet this objective, a baseline characterization of hydrology on the small catchment scale is being assessed across different land uses typical in rural Panama. The small experimental catchments are found within Panama’s protected Soberania National Park and the adjacent headwaters of the Agua Salud and Mendoza Rivers, all of which are part of the greater Panama Canal Watershed. The land uses being monitored include a variety of control catchments as well as treated pasture sites. The catchments used for this study include a mature old regrowth forest, a 50% deforested or mosaic regrowth site, an active pasture and a monoculture invasive grass site (saccharum spontaneum) as experimental controls and two treated catchments that were recently abandoned pastures converted to teak and native species timber plantations. Installed instrumentation includes a network of rain gauges, v-notched weirs, atmometers, an eddy covariance system and an assortment of meteorological and automated geochemical sampling systems. Spatial, rainfall, runoff and ET data across these six geologically and topographically similar catchments are available from 2009 and 2010. Classic water balance and paired catchment techniques were used to compare the catchments on an annual, seasonal, and event basis. This study sets the stage for hydrologic modeling and for better understanding the effects of vegetation and land-use history on rainfall-runoff processes for the Agua Salud Project and Panama Canal

  13. Comparing the Thermodynamic Behaviour of Al(1)+ZrO2(s) to Al(1)+Al2O3(s)

    NASA Technical Reports Server (NTRS)

    Copland, Evan

    2004-01-01

    In an effort to better determine the thermodynamic properties of Al(g) and Al2O(g). the vapor in equilibrium with Al(l)+ZrO2(s) was compared to the vapor in equilibrium with Al(l)+Al2O3(s) over temperature range 1197-to-1509K. The comparison was made directly by Knudsen effusion-cell mass spectrometry with an instrument configured for a multiple effusion-cell vapor source (multi-cell KEMS). Second law enthalpies of vaporization of Al(g) and Al2O(g) together with activity measurements show that Al(l)+ZrO2(s) is thermodynamically equivalent to Al(l)+Al2O3(s), indicating Al(l) remained pure and Al2O3(s) was present in the ZrO2-cell. Subsequent observation of the Al(l)/ZrO2 and vapor/ZrO2 interfaces revealed a thin Al2O3-layer had formed, separating the ZrO2-cell from Al(l) and Al(g)+Al2O(g), effectively transforming it into an Al2O3 effusion-cell. This behavior agrees with recent observations made for Beta-NiAl(Pt) alloys measured in ZrO2 effusion-cell.

  14. Salud America! Developing a National Latino Childhood Obesity Research Agenda.

    PubMed

    Ramirez, Amelie G; Chalela, Patricia; Gallion, Kipling J; Green, Lawrence W; Ottoson, Judith

    2011-06-01

    U.S. childhood obesity has reached epidemic proportions, with one third of children overweight or obese. Latino children have some of the highest obesity rates, a concern because they are part of the youngest and fastest-growing U.S. minority group. Unfortunately, scarce research data on Latinos hinders the development and implementation of evidence-based, culturally appropriate childhood obesity interventions. In response, the Salud America! network conducted a national Delphi survey among researchers and stakeholders to identify research priorities to address Latino childhood obesity and compare differences by occupation and race or ethnicity. The resulting first-ever National Latino Childhood Obesity Research Agenda provides a framework to stimulate research and collaboration among investigators, providers, and communities, and inform policy makers about the epidemic's seriousness and specific needs for priority funding. The agenda ranks family as the main ecological level to prevent Latino childhood obesity--followed by community, school, society, and individual-and ranks top research priorities in each level.

  15. Diseño de un programa basado en la promoción del desarrollo positivo en la infancia para la prevención temprana de la violencia en Colombia.

    PubMed

    Hernández Holguín, Dora M; Páez Zapata, Esteban; Múnera Restrepo, Laura M; Duque Ramírez, Luis F

    2017-03-01

    Aunque algunos informes identifiquen a Colombia como ejemplo de un país que ha logrado revertir los niveles crecientes de violencia, estos siguen siendo altos. Por este motivo se han convocado acciones de promoción de la convivencia y prevención de la violencia, a las cuales responde el programa que presentamos en este artículo. Este programa está basado en la perspectiva contextual-evolutiva del modelo ecológico y en la educación para la salud, tendiente al cuidado de sí en los padres o cuidadores, y al ejercicio de una crianza, centrada en los derechos de los niños, el desarrollo infantil y la promoción de la salud mental, con el fin de promover el desarrollo saludable y prevenir comportamientos agresivos en los niños; éste es presentado como una alternativa de orientación psicosocial para el fortalecimiento de estrategias y programas dirigidos a la primera infancia.

  16. Nanoporous Al sandwich foils using size effect of Al layer thickness during Cu/Al/Cu laminate rolling

    NASA Astrophysics Data System (ADS)

    Yu, Hailiang; Lu, Cheng; Tieu, A. Kiet; Li, Huijun; Godbole, Ajit; Kong, Charlie

    2018-06-01

    The roll bonding technique is one of the most widely used methods to produce metal laminate sheets. Such sheets offer interesting research opportunities for both scientists and engineers. In this paper, we report on an experimental investigation of the 'thickness effect' during laminate rolling for the first time. Using a four-high multifunction rolling mill, Cu/Al/Cu laminate sheets were fabricated with a range of thicknesses (16, 40, 70 and 130 μm) of the Al layer. The thickness of the Cu sheets was a constant 300 μm. After rolling, TEM images show good bonding quality between the Cu and Al layers. However, there are many nanoscale pores in the Al layer. The fraction of nanoscale pores in the Al layer increases with a reduction in the Al layer thickness. The finite element method was used to simulate the Cu/Al/Cu rolling process. The simulation results reveal the effect of the Al layer thickness on the deformation characteristics of the Cu/Al/Cu laminate. Finally, we propose that the size effect of the Al layer thickness during Cu/Al/Cu laminate rolling may offer a method to fabricate 'nanoporous' Al sandwich laminate foils. Such foils can be used in electromagnetic shielding of electrical devices and noisy shielding of building.

  17. Ti{sub 2}AlN thin films synthesized by annealing of (Ti+Al)/AlN multilayers

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Cabioch, Thierry, E-mail: Thierry.cabioch@univ-poitiers.fr; Alkazaz, Malaz; Beaufort, Marie-France

    2016-08-15

    Highlights: • Epitaxial thin films of the MAX phase Ti{sub 2}AlN are obtained by thermal annealing. • A new metastable (Ti,Al,N) solid solution with the structure of α-T is evidenced. • The formation of the MAX phase occurs at low temperature (600 °C). - Abstract: Single-phase Ti{sub 2}AlN thin films were obtained by annealing in vacuum of (Ti + Al)/AlN multilayers deposited at room temperature by magnetron sputtering onto single-crystalline (0001) 4H-SiC and (0001) Al{sub 2}O{sub 3} substrates. In-situ X-ray diffraction experiments combined with ex-situ cross-sectional transmission electron microscopy observations reveal that interdiffusion processes occur in the multilayer at amore » temperature of ∼400 °C leading to the formation of a (Ti, Al, N) solid solution, having the hexagonal structure of α-Ti, whereas the formation of Ti{sub 2}AlN occurs at 550–600 °C. Highly oriented (0002) Ti{sub 2}AlN thin films can be obtained after an annealing at 750 °C.« less

  18. Efectos combinados de la ampliación de la atención primaria de salud y de las transferencias condicionadas de dinero en efectivo sobre la mortalidad infantil en Brasil, 1998–2010*

    PubMed Central

    Guanais, Frederico C.

    2015-01-01

    Objetivos. Examiné los efectos combinados del acceso a la atención primaria mediante el Programa de Salud Familiar (PSF) y las transferencias condicionadas de dinero en efectivo del Programa Bolsa Familia (PBF) sobre la mortalidad infantil posneonatal (MIPN) en Brasil. Métodos. Empleé un análisis ecológico longitudinal usando datos en panel de 4 583 municipios brasileños de 1998 al 2010, con 54 253 observaciones en total. Estimé modelos de regresión de efectos fijos por mínimos cuadrados ordinarios, con la tasa de MIPN como la variable dependiente y el PSF, el PBF y sus interacciones como las principales variables independientes de interés. Resultados. La asociación de una mayor cobertura del PSF con una menor tasa de MIPN se volvió más fuerte conforme aumentaba la cobertura del PBF. En los promedios de todas las demás variables, cuando la cobertura de PBF era 25%, la MIPN predicha fue 5,24 (intervalo de confianza [IC] de 95% = 4,95, 5,53) para una cobertura del PSF de 0%, y de 3,54 (IC de 95% = 2,77, 4,31) para una cobertura del PSF de 100%. Cuando la cobertura del PBF era de 60%, la MIPN predicha fue 4,65 (IC de 95% = 4,36, 4,94) para una cobertura del PSF de 0%, y de 1,38 (IC de 95% = 0,88, 1,89) para una cobertura del PSF de 100%. Conclusiones. El efecto del PSF depende de la ampliación del PBF. Para las poblaciones empobrecidas y subatendidas, la combinación de intervenciones tanto del lado de la oferta como del lado de la demanda podría ser necesaria para mejorar los resultados en salud.

  19. Innovations in Graduate Public Health Education: The Instituto Nacional de Salud Pública

    PubMed Central

    Ávila, Mauricio Hernández

    2015-01-01

    During the past 10 years, the Instituto Nacional de Salud Pública (National Institute of Public Health) in Mexico has meticulously revised its educational model. This analysis resulted in the transformation of its educational model by tracing a new path in the pedagogical structure and faculty development to meet current challenges and students’ needs. The first stage dealt with the national and international accreditation standards that came with the 21st century. The second stage responded to evidence of cognitive research showing that students are better prepared when they are engaged, active, and responsible for their own learning. This transformation was grounded on the use of information and communication technologies and on a competency-based educational approach that has led the expansion and innovation of educational practice. PMID:25706028

  20. Innovative Tuberculosis Symposium held during Cuba Salud 2015.

    PubMed

    Chapman, Helena J; Armas Pérez, Luisa

    2016-12-01

    The fourth Tuberculosis (TB) Symposium, held during the Cuba Salud 2015 International Convention, highlighted advancements in research on TB and Mycobacterium tuberculosis (Mtb) by interdisciplinary teams from academic and federal institutions in Cuba, Colombia, Mexico, and the Dominican Republic. Delegates focused on the targets presented in the World Health Organization End TB Strategy for 2016-2035 and elaborated on four primary themes: 1) attention to vulnerable populations such as immunocompromised individuals, health care workers, and residents of long-term institutions such as prisons and nursing homes; 2) identification of active and latent TB cases through contact investigations; 3) spread and control of drug-resistant Mtb strains; and 4) advancements in the development of novel vaccines or "booster" immunizations. This international TB forum served as a platform for experts in diverse disciplines in these Latin American countries to discuss challenges faced by TB research and control programs, proposing novel research initiatives and promoting collaborative teamwork strategies for TB elimination. In solidarity, collaborative efforts in TB control require identification of symptomatic individuals, rapid diagnostic testing for TB, drug susceptibility assays on Mtb strains, and management that provide universal and gratuitous access to directly observed short-course therapy. Copyright © 2016 Elsevier Ltd. All rights reserved.

  1. ALS Association

    MedlinePlus

    ... toward a world without ALS! Walk to Defeat ALS® Walk to Defeat ALS® draws people of all ... We need your help. I Will Advocate National ALS Registry The National ALS Registry is a congressionally ...

  2. [Bibliometric study of the original articles published in the Revista Española de Salud Pública (1991-2000). I. General indicators].

    PubMed

    Pérez Andrés, Cristina; Estrada Lorenzo, José Manuel; Villar Alvarez, Fernando; Rebollo Rodríguez, M José

    2002-01-01

    For some time, the most of reports have been being disseminated by way of scientific journals, bibliometric studies therefore being fundamental to the characterization and evaluation thereof. The purpose of this study is that of characterizing the Revista Española de Salud Pública based on the original articles published therein throughout the 1991-2000 period. Original articles published in the Revista Española de Salud Pública throughout the 1991-2000 period, all inclusive. A study has been made of the following variables: number of original articles, collaboration index or number of signing authors per study, productivity index, geographical spread and main subject. Throughout the 1991-2000 period, 290 original studies (52.3%) of a total of 555 studies were published. The number of originals averaged 29 originals/year A 4.5 degree of collaboration was found to exist for this journal (number signing authors/number originals) for the period under study. The annual of originals by Autonomous Community reveals in the Autonomous Community of Madrid (20.7%), Autonomous Community of Valencia (16.4%), Andalusia (16.1%) and Catalunya (10.0%) have published studies every year throughout the ten-year period under study. The most prevalent subject of all was that related to "Communicable disease" (86 originals), Primary Health Care" (34) and "Environmental pollution" (21). Generally speaking, it apparently follows that the Revista Española de Salud Pública continues to fall within the output-related indicators of other Spanish and foreign journals and that it has also evolved in keeping with the trend proper of scientific output in the biomedical field. Although "Communicable diseases" are not the main cause of mortality, they continue being the main subject more frequently studied.

  3. Piezo-tunnel effect in Al/Al2O3/Al junctions elaborated by atomic layer deposition

    NASA Astrophysics Data System (ADS)

    Rafael, R.; Puyoo, E.; Malhaire, C.

    2017-11-01

    In this work, the electrical transport in Al/Al2O3/Al junctions under mechanical stress is investigated in the perspective to use them as strain sensors. The metal/insulator/metal junctions are elaborated with a low temperature process (≤200 °C) fully compatible with CMOS back-end-of-line. The conduction mechanism in the structure is found to be Fowler-Nordheim tunneling, and efforts are made to extract the relevant physical parameters. Gauge factors up to -32.5 were found in the fabricated devices under tensile stress. Finally, theoretical mechanical considerations give strong evidence that strain sensitivity in Al/Al2O3/Al structures originates not only from geometrical deformations but also from the variation of interface barrier height and/or effective electronic mass in the tunneling oxide layer.

  4. Influence of AlN(0001) Surface Reconstructions on the Wettability of an Al/AlN System: A First-Principle Study.

    PubMed

    Cao, Junhua; Liu, Yang; Ning, Xiao-Shan

    2018-05-11

    A successful application of a hot dip coating process that coats aluminum (Al) on aluminum nitride (AlN) ceramics, revealed that Al had a perfect wettability to the ceramics under specific circumstances, which was different from previous reports. In order to elucidate the mechanism that controlled the supernormal wetting phenomenon during the dip coating, a first-principle calculation of an Al(111)/AlN(0001) interface, based on the density functional theory (DFT), was employed. The wettability of the Al melt on the AlN(0001) surface, as well as the effect that the surface reconstruction of AlN and the oxygen adsorption had on Al for the adhesion and the wettability of the Al/AlN system, were studied. The results revealed that a LCM (laterally contracted monolayer) reconstruction could improve the adhesion and wettability of the system. Oxygen adsorption on the free surface of Al decreased the contact angle, because the adsorption reduced of the surface tension of Al. A prefect wetting was obtained only after some of the oxygen atoms adsorbed on the free surface of Al. The supernormal wetting phenomenon came from the surface reconstruction of the AlN and the adsorption of oxygen atoms on the Al melt surface.

  5. Japanese version of the ALS-FTD-Questionnaire (ALS-FTD-Q-J).

    PubMed

    Watanabe, Yasuhiro; Beeldman, Emma; Raaphorst, Joost; Izumi, Yuishin; Yoshino, Hiide; Masuda, Michihito; Atsuta, Naoki; Ito, Satoru; Adachi, Tadashi; Adachi, Yoshiki; Yokota, Osamu; Oda, Masaya; Hanashima, Ritsuko; Ogino, Mieko; Ichikawa, Hiroo; Hasegawa, Kazuko; Kimura, Hideki; Shimizu, Toshio; Aiba, Ikuko; Yabe, Hayato; Kanba, Makoto; Kusumi, Kimiyoshi; Aoki, Tetsuya; Hiroe, Yu; Watanabe, Hirohisa; Nishiyama, Kazutoshi; Nomoto, Masahiro; Sobue, Gen; Nakashima, Kenji

    2016-08-15

    Amyotrophic lateral sclerosis (ALS) and frontotemporal dementia (FTD) share common clinical, genetic and neuropathological features. Some ALS patients have behavioral/personality changes, which could result in significant obstacles in the care provided by family members and caregivers. An easy screening tool would contribute greatly to the evaluation of these symptoms. We translated the ALS-FTD-Questionnaire, developed in the Netherlands, into Japanese (ALS-FTD-Q-J) and examined the clinimetric properties (internal consistency, construct and clinical validity). Patients with ALS and/or behavioral variant FTD (bvFTD) were evaluated alongside healthy controls in this multicenter study. All ALS patients, regardless of bvFTD status, were further evaluated by the frontal behavioral inventory (FBI) and for frontal/executive function, cognition, anxiety/depression, and motor functions. Data from 146 subjects were analyzed: ALS (92), ALS-bvFTD (6), bvFTD (16), and healthy controls (32). The internal consistency of the ALS-FTD-Q-J was good (Cronbach α=0.92). The ALS-FTD-Q-J showed construct validity as it exhibited a high correlation with the FBI (r=0.79). However, correlations were moderate with anxiety/depression and low with cognitive scales, in contrast to the original report, i.e. a moderate correlation with cognition and a low correlation with anxiety/depression. The ALS-FTD-Q-J discriminated ALS patients from (ALS-)bvFTD patients and controls. Thus, the ALS-FTD-Q-J is useful for evaluating Japanese ALS/FTD patients. Copyright © 2016 Elsevier B.V. All rights reserved.

  6. 3-Dimensional Microstructure of Al-Al3Ti Alloy Severely Deformed by ECAP

    NASA Astrophysics Data System (ADS)

    Sato, Hisashi; Hishikawa, Takahisa; Makino, Yuuki; Kunimine, Takahiro; Watanabe, Yoshimi

    Microstructure of Al-Al3Ti alloy deformed by Equal-Channel-Angular Pressing (ECAP) is 3-dimensionally investigated. Especially, distribution of Al3Ti particles is focused in this study. The Al-Al3Ti alloy has coarse Al3Ti platelet particles in α-Al matrix. When the Al-Al3Ti alloy is deformed by ECAP under route A, fine Al3Ti platelet particles are observed. These Al3Ti platelet particles are aligned along to deformation axis, and its plane normal is perpendicular to the deformation axis. On the other hand, Al-Al3Ti alloy ECAPed under route Bc forms several groups consisted of fine Al3Ti platelet particles. Moreover, longitudinal size of the Al3Ti particle groups is close to that of initial Al3Ti particles with 4-pass ECAP specimen. These distribution behaviors of the Al3Ti particle can be explained by plastic flow of α-Al matrix. Finally, it is concluded that distribution of Al3Ti particle in Al-Al3Ti alloy by ECAP is controlled by plastic deformation of α-Al matrix.

  7. Abu al-Layth al-Libi

    DTIC Science & Technology

    2015-02-01

    in the region and apparently “showed brilliance in this regard through his perfect memorization , clever understanding, persistence, and patience...Taliban’s officials quietly left the capital without informing 73 Vernie Liebl, “Al-Qaida on the US Invasion of Afghanistan in Their Own Words ,” Small Wars... memorization . A talented and charismatic orator, he also used to deliver eulogies and `Id sermons. As to `Abdallah Sa`id al-Libi, his profile is similar

  8. Defect structures in ordered intermetallics; grain boundaries and surfaces in FeAl, NiAl, CoAl and TiAl

    NASA Astrophysics Data System (ADS)

    Mutasa, Batsirai Manyara

    Ordered intermetallics based on transition metal aluminides have been proposed as structural materials for advanced aerospace applications. The development of these materials, which have the advantages of low density and high operating temperatures, have been focused on the aluminides of titanium, nickel and iron. Though these materials exhibit attractive properties at elevated temperatures, their utilization is limited due to their propensity for low temperature fracture and susceptibility to decreased ductility due to environmental effects. A major embrittlement mechanism at ambient temperatures in these aluminides has been by the loss of cohesive strength at the interfaces (intergranular failure). This study focuses on this mechanism of failure, by undertaking a systematic study of the energies and structures of specific grain boundaries in some of these compounds. The relaxed atomistic grain boundary structures in B2 aluminides, FeAl, NiAl and CoAl and L10 gamma-TiAl were investigated using molecular statics and embedded atom potentials in order to explore general trends for a series of B2 compounds as well as TiAl. The potentials used correctly predict the proper mechanism of compositional disorder of these compounds. Using these potentials, point defects, free surface energies and various grain boundary structures of similar energies in three B2 compounds, FeAl, NiAl and CoAl were studied. These B2 alloys exhibited increasing anti-phase boundary energies respectively. The misorientations chosen for detailed study correspond to the Sigma5(310) and Sigma5(210) boundaries. These boundaries were investigated with consideration given to possible variations in the local chemical composition. The effects of both boundary stoichiometry and bulk stoichiometry on grain boundary energetics were also considered. Defect energies were calculated for boundaries contained in both stoichiometric and off-stoichiometric bulk. The surface energies for these aluminides were also

  9. A Rechargeable Al/S Battery with an Ionic-Liquid Electrolyte.

    PubMed

    Gao, Tao; Li, Xiaogang; Wang, Xiwen; Hu, Junkai; Han, Fudong; Fan, Xiulin; Suo, Liumin; Pearse, Alex J; Lee, Sang Bok; Rubloff, Gary W; Gaskell, Karen J; Noked, Malachi; Wang, Chunsheng

    2016-08-16

    Aluminum metal is a promising anode material for next generation rechargeable batteries owing to its abundance, potentially dendrite-free deposition, and high capacity. The rechargeable aluminum/sulfur (Al/S) battery is of great interest owing to its high energy density (1340 Wh kg(-1) ) and low cost. However, Al/S chemistry suffers poor reversibility owing to the difficulty of oxidizing AlSx . Herein, we demonstrate the first reversible Al/S battery in ionic-liquid electrolyte with an activated carbon cloth/sulfur composite cathode. Electrochemical, spectroscopic, and microscopic results suggest that sulfur undergoes a solid-state conversion reaction in the electrolyte. Kinetics analysis identifies that the slow solid-state sulfur conversion reaction causes large voltage hysteresis and limits the energy efficiency of the system. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Growth of Ni-Al alloys on Ni(1 1 1), from Al deposits of various thicknesses: (II) Formation of NiAl over a Ni 3Al interfacial layer

    NASA Astrophysics Data System (ADS)

    Le Pévédic, S.; Schmaus, D.; Cohen, C.

    2007-01-01

    This paper describes the second part of a study devoted to the growth of thin Ni-Al alloys after deposition of Al on Ni(1 1 1). In the previous paper [S. Le Pévédic, D. Schmaus, C. Cohen, Surf. Sci. 600 (2006) 565] we have described the results obtained for ultra-thin Al deposits, leading, after annealing at 750 K, to an epitaxial layer of Ni 3Al(1 1 1). In the present paper we show that this regime is only observed for Al deposits smaller than 8 × 10 15 Al/cm 2 and we describe the results obtained for Al deposits exceeding this critical thickness, up to 200 × 10 15 Al/cm 2. Al deposition was performed at low temperature (around 130 K) and the alloying process was followed in situ during subsequent annealing, by Auger electron spectroscopy, low energy electron diffraction and ion beam analysis-channeling measurements, in an ultra-high vacuum chamber connected to a Van de Graaff accelerator. We evidence the formation, after annealing at 750 K, of a crystallographically and chemically well-ordered NiAl(1 1 0) layer (whose thickness depends on the deposited Al amount), over a Ni 3Al "interfacial" layer (whose thickness—about 18 (1 1 1) planes—is independent of the deposited Al amount). The NiAl overlayer is composed of three variants, at 120° from each other in the surface plane, in relation with the respective symmetries of NiAl(1 1 0) and Ni 3Al(1 1 1). The NiAl layer is relaxed (the lattice parameters of cc-B2 NiAl and fcc-L1 2 Ni 3Al differ markedly), and we have determined its epitaxial relationship. In the case of the thickest alloyed layer formed the results concerning the structure of the NiAl layer have been confirmed and refined by ex situ X-ray diffraction and information on its grain size has been obtained by ex situ Atomic Force Microscopy. The kinetics of the alloying process is complex. It corresponds to an heterogeneous growth leading, above the thin Ni 3Al interfacial layer, to a mixture of Al and NiAl over the whole Al film, up to the

  11. Multidisciplinary ALS care improves quality of life in patients with ALS.

    PubMed

    Van den Berg, J P; Kalmijn, S; Lindeman, E; Veldink, J H; de Visser, M; Van der Graaff, M M; Wokke, J H J; Van den Berg, L H

    2005-10-25

    To examine the effect of multidisciplinary ALS care on the quality-of-life (QoL) in patients with ALS and their caregivers. In a cross-sectional study, 208 patients with ALS and their caregivers were interviewed. QoL was assessed using the 36-item Short Form Health Survey (SF-36) and two visual analogue scales (VAS). Criteria for multidisciplinary ALS care were: an ALS team headed by a consultant in rehabilitation medicine and consisting of at least a physical therapist, occupational therapist, speech pathologist, dietician and a social worker; use of the Dutch ALS consensus guidelines for ALS care; and at least six incident ALS patients per year. Clinical characteristics and functional loss of the 133 patients receiving multidisciplinary ALS care and the 75 patients receiving general ALS care were similar. The percentage of patients with adequate aids and appliances was higher in those with multidisciplinary ALS care (93.1 vs 81.3%, p = 0.008), whereas the number of visits to professional caregivers was similar in both groups. Patients in the multidisciplinary ALS care group had a better mental QoL on the SF-36 Mental Summary Score than those in the general care group (p = 0.01). The difference in QoL was most pronounced in the domains of Social Functioning and Mental Health, and was independent of the presence of aids and appliances. No significant differences were found in the SF-36 Physical Summary Score, VAS, or in QoL of caregivers of patients with ALS. High standard of care improves mental quality-of-life in patients with ALS.

  12. "Sitting in different chairs:" roles of the community health workers in the Poder es Salud/Power for Health Project.

    PubMed

    Farquhar, S A; Wiggins, N; Michael, Y L; Luhr, G; Jordan, J; Lopez, A

    2008-07-01

    Evaluations of Community Health Worker programs consistently document improvements in health, yet few articles clearly describe the roles of Community Health Workers (CHWs) from the CHWs' perspective. This article presents the CHWs' points of view regarding the various roles they played in a community-based participatory research (CBPR) project, Poder es Salud/Power for Health in Portland, Oregon, including their roles as community organizers and co-researchers. Authors draw from an analysis of transcript data from in-depth interviews conducted with CHWs to present a description of the strategies employed by the CHWs to build leadership skills and knowledge among community members. CHWs also discuss their own personal and professional development. The analysis of the interviews suggests that CHWs valued their multiple roles with Poder es Salud/Power for Health and their participation on the project's Steering Committee. Based on CHWs' descriptions of their work, this type of involvement appears to build the CHWs' leadership skills and sense of efficacy to create change in their communities. By serving as community organizers and participating as producers of research, rather than acting merely as a deliverer of the intervention activities, the CHWs were able to build skills that make them more successful as CHWs.

  13. AlGaN-based ultraviolet light-emitting diodes on sputter-deposited AlN templates with epitaxial AlN/AlGaN superlattices

    NASA Astrophysics Data System (ADS)

    Zhao, Lu; Zhang, Shuo; Zhang, Yun; Yan, Jianchang; Zhang, Lian; Ai, Yujie; Guo, Yanan; Ni, Ruxue; Wang, Junxi; Li, Jinmin

    2018-01-01

    We demonstrate AlGaN-based ultraviolet light-emitting diodes (UV-LEDs) grown by metalorganic chemical vapor deposition (MOCVD) on sputter-deposited AlN templates upon sapphire substrates. An AlN/AlGaN superlattices structure is inserted as a dislocation filter between the LED structure and the AlN template. The full width at half maximum values for (0002) and (10 1 bar 2) X-ray rocking curves of the n-type Al0.56Ga0.44N layer are 513 and 1205 arcsec, respectively, with the surface roughness of 0.52 nm. The electron concentration and mobility measured by Hall measurement are 9.3 × 1017cm-3 and 54 cm2/V·s at room temperature, respectively. The light output power of a 282-nm LED reaches 0.28 mW at 20 mA with an external quantum efficiency of 0.32%. And the values of leakage current and forward voltage of the LEDs are ∼3 nA at -10 V and 6.9 V at 20 mA, respectively, showing good electrical performance. It is expected that the cost of the UV-LED can be reduced by using sputter-deposited AlN template.

  14. Cyclic oxidation resistance of a reaction milled NiAl-AlN composite

    NASA Technical Reports Server (NTRS)

    Lowell, Carl E.; Barrett, Charles A.; Whittenberger, J. D.

    1990-01-01

    Based upon recent mechanical property tests a NiAl-AlN composite produced by cryomilling has very attractive high temperature strength. This paper focuses on the oxidation resistance of the NiAl-AlN composite at 1473 and 1573 K as compared to that of Ni-47Al-0.15Zr, one of the most oxidation resistant intermetallics. The results of cyclic oxidation tests show that the NiAl-AlN composite has excellent properties although not quite as good as those of Ni-47Al-0.15Zr. The onset of failure of the NiAl-AlN was unique in that it was not accompanied by a change in scale composition from alumina to less protective oxides. Failure in the composite appears to be related to the entrapment of AlN particles within the alumina scale.

  15. ALS-Plus Syndrome: Non-Pyramidal Features in a Large ALS Cohort

    PubMed Central

    McCluskey, Leo; Vandriel, Shannon; Elman, Lauren; Van Deerlin, Vivianna M.; Powers, John; Boller, Ashley; Wood, Elisabeth McCarty; Woo, John; McMillan, Corey T.; Rascovsky, Katya; Grossman, Murray

    2014-01-01

    Objective Autopsy studies show widespread pathology in amyotrophic lateral sclerosis (ALS), but clinical surveys of multisystem disease in ALS are rare. We investigated ALS-Plus syndrome, an understudied group of patients with clinical features extending beyond pyramidal and neuromuscular systems with or without cognitive/behavioral deficits. Methods In a large, consecutively-ascertained cohort of 550 patients with ALS, we documented atypical clinical manifestations. Genetic screening for C9orf72 hexanucleotide expansions was performed in 343 patients, and SOD1, TARDBP, and VCP were tested in the subgroup of patients with a family history of ALS. Gray matter and white matter imaging was available in a subgroup of 30 patients. Results Seventy-five (13.6%) patients were identified with ALS-Plus syndrome. We found disorders of ocular motility, cerebellar, extrapyramidal and autonomic functioning. Relative to those without ALS-Plus, cognitive impairment (8.0% vs 2.9%, p=0.029), bulbar-onset (49.3% vs 23.2%, p<0.001), and pathogenic mutations (20.0% vs 8.4%, p=0.015) were more than twice as common in ALS-Plus. Survival was significantly shorter in ALS-Plus (29.66 months vs 42.50 months, p=0.02), regardless of bulbar-onset or mutation status. Imaging revealed significantly greater cerebellar and cerebral disease in ALS-Plus compared to those without ALS-Plus. Conclusions ALS-Plus syndrome is not uncommon, and the presence of these atypical features is consistent with neuropathological observations that ALS is a multisystem disorder. ALS-Plus syndrome is associated with increased risk for poor survival and the presence of a pathogenic mutation. PMID:25086858

  16. Implementing a Randomized Controlled Trial through a Community-Academia Partnered Participatory Research: Arte con Salud Research-Informed Intervention.

    PubMed

    Noboa-Ortega, Patricia; Figueroa-Cosme, Wanda I; Feldman-Soler, Alana; Miranda-Díaz, Christine

    2017-06-01

    "Arte con Salud" is an HIV/AIDS prevention intervention tailored for Puerto Rican women who have sex with men. The intervention curriculum was refined through a community-academic collaboration between Taller Salud, the UPRCayey Campus, and the UCC-School of Medicine, subsided in 2012-13 by PRCTRC. The collaboration has been crucial to validate the impact of using art as a tool to facilitate sexual negotiation skills and safer sexual practices among adult women have sex with men participating in HIV prevention education. This article describes the vision, valley, victory phases endured to establish a community-academia partnership based on the CPPR framework as an effective mean to implement a randomized controlled trial intervention (RCT). We also discuss the barriers, outcomes, and lessons learned from this partnership. Some of the identified solutions include: setting goals to secure funding, regular meetings, and the inclusion of undergraduate level students to assist in the implementation of the intervention. These solutions helped to build trust among the community and academic partners. As a result of this collaboration, a total of 86 participants were enrolled and 5 competitive research grants have been submitted. The community-academic collaboration was essential in order to build a solid research infrastructure that addresses the complexities of HIV prevention education among groups of Puerto Rican women.

  17. Valence subband coupling effect on polarization of spontaneous emissions from Al-rich AlGaN/AlN quantum wells.

    PubMed

    Lu, Huimin; Yu, Tongjun; Yuan, Gangcheng; Jia, Chuanyu; Chen, Genxiang; Zhang, Guoyi

    2012-12-03

    The optical polarization properties of Al-rich AlGaN/AlN quantum wells (QWs) were investigated using the theoretical model based on the k·p method. Numerical results show that there is valence subband coupling which can influence the peak emission wavelength and emission intensity for TE and TM polarization components from Al-rich AlGaN/AlN QWs. Especially the valence subband coupling could be strong enough when CH1 is close to HH1 and LH1 subbands to modulate the critical Al content switching dominant emissions from TE to TM polarization. It is believed that the valence subband coupling may give important influence on polarization properties of spontaneous emissions and should be considered in designing high efficiency AlGaN-based ultraviolet (UV) LEDs.

  18. Modulating optical polarization properties of Al-rich AlGaN/AlN quantum well by controlling wavefunction overlap

    NASA Astrophysics Data System (ADS)

    Chen, X. J.; Yu, T. J.; Lu, H. M.; Yuan, G. C.; Shen, B.; Zhang, G. Y.

    2013-10-01

    Using modified k.p perturbation method, the optical polarization properties of Al-rich AlGaN/AlN quantum wells (QWs) are studied. It is found that change of wavefunction overlaps between conduction band and valance subbands of heavy hole, light hole, and crystal-field split off hole is different. Such difference leads to the overturn of polarization degree and modulates optical polarization properties as well width and strain vary. This prompts that changing wavefunction overlaps of electron and hole can lead to a way to modulate optical polarization properties of Al-rich AlGaN/AlN QWs, on no condition that valence band order changes.

  19. Effect of AlB2 on the P-threshold in Al-Si alloy

    NASA Astrophysics Data System (ADS)

    Wu, Yuying; Liu, Xiangfa

    2018-06-01

    The nucleation of primary Si in Al-Si alloys has been investigated in this work. It was found that there was a threshold concentration of P, below which AlP can not heterogeneous nucleate primary Si in Al-12 wt%Si alloy. AlB2 can not nucleate primary Si directly, but the presence of AlB2 may assist the nucleation of AlP leading to the nucleation of primary Si particles. In addition, with addition of AlB2, the nucleation efficiency of AlP can be improved in Al-18 wt%Si alloy. The orientation relationship between AlB2 and AlP has been calculated, and the adsorption model for AlB2 and AlP was proposed in this work.

  20. The applicability of the concept of treatment adherence in the context of the Brazilian mental health system.

    PubMed

    Alvarez, Patricia Elizabeth Sanz de; Rosendo, Ernestina; Alchieri, João Carlos

    2016-06-01

    To present reflections on the type of research conducted on a treatment adherence among users of Public Mental Health System in Brazil and discuss the applicability of the concept of adherence to treatment in this context. Literature review in SciELO, LILACS, Cochrane Library and PubMed / MEDLINE using the Health Sciences Descriptors (DeCS) treatment, adhesion and "mental health" and the specific vocabulary of the Medical Subject Headings (MeSH) "patient compliance/psychologist" y "mental health". They were included for review the complete texts and theses published between 2007-2012 in Portuguese, English and Spanish. 127 articles were recovered, 32 specifically related to mental health. Eight were excluded for duplicates and after reading the remaining 24 articles were selected for this study 10 conducted in the field of Mental Health in Brazil. No investigations have been identified with focus on adherence to psychosocial treatment offered in public mental health. disregard of the mental health legislation and reinforce the asylum model of assistance. Presentar reflexiones sobre el tipo de investigaciones realizadas en Brasil sobre la adhesión al tratamiento de los usuarios del Sistema Público de Salud Mental y discutir la aplicabilidad del concepto de adhesión al tratamiento en dicho contexto. Revisión bibliográfica en las bases SciELO, LILACS, Biblioteca Cochrane y PubMed/MEDLINE utilizando los descriptores de Ciencias de la Salud (DeCS) adhesión, tratamiento y "salud mental" y el vocabulario específico de Medical Subject Headings (MeSH) "patient compliance/psychologist" y "mental health". Se incluyeron los textos completos y las tesis publicadas entre 2007-2012, en portugués, inglés y español. F1eron recuperados 127 artículos, 32 específicamente de la salud mental. Se excluyeron los 8 duplicados y de los 24 restantes fueron seleccionados para el presente trabajo los 10 realizados en Brasil. No se identificaron enfoques sobre la adhesión al

  1. High temperature deformation of NiAl and CoAl

    NASA Technical Reports Server (NTRS)

    Nix, W. D.

    1982-01-01

    The high temperature mechanical properties of the aluminides are reviewed with respect to their potential as high temperature structural materials. It is shown that NiAl and CoAl are substantially stronger than the pure metals Ni and Co at high temperatures and approach the strength of some superalloys, particularly when those superalloys are tested in "weak" directions. The factors that limit and control the high temperature strengths of NiAl and CoAl are examined to provide a basis for the development of intermetallic alloys of this type.

  2. Ventanillas de Salud: A Collaborative and Binational Health Access and Preventive Care Program.

    PubMed

    Rangel Gomez, Maria Gudelia; Tonda, Josana; Zapata, G Rogelio; Flynn, Michael; Gany, Francesca; Lara, Juanita; Shapiro, Ilan; Rosales, Cecilia Ballesteros

    2017-01-01

    While individuals of Mexican origin are the largest immigrant group living in the U.S., this population is also the highest uninsured. Health disparities related to access to health care, among other social determinants, continue to be a challenge for this population. The government of Mexico, in an effort to address these disparities and improve the quality of life of citizens living abroad, has partnered with governmental and non-governmental health-care organizations in the U.S. by developing and implementing an initiative known as Ventanillas de Salud -Health Windows-(VDS). The VDS is located throughout the Mexican Consular network and aim to increase access to health care and health literacy, provide health screenings, and promote healthy lifestyle choices among low-income and immigrant Mexican populations in the U.S.

  3. Using Adult Mosquitoes to Transfer Insecticides to Aedes Aegypti Larval Habitats

    DTIC Science & Technology

    2009-07-14

    Playa , a municipality belonging to Ciudad de La Habana, Cuba. Rev Panam Salud Publica Pan Am J Public Health 19:379–384. 33. Harrington LC, et al...United Kingdom; bLaboratorio de Salud Publica, Iquitos, Peru; cIfakara Health Institute, Dar es Salaam, United Republic of Tanzania; dVector Group...Liverpool School of Tropical Medicine, Liverpool L3 5QA, United Kingdom; eNaval Medical Research Center Detachment, United States Navy, Lima , Peru; and f

  4. Atomistic Modeling of RuAl and (RuNi) Al Alloys

    NASA Technical Reports Server (NTRS)

    Gargano, Pablo; Mosca, Hugo; Bozzolo, Guillermo; Noebe, Ronald D.; Gray, Hugh R. (Technical Monitor)

    2002-01-01

    Atomistic modeling of RuAl and RuAlNi alloys, using the BFS (Bozzolo-Ferrante-Smith) method for alloys is performed. The lattice parameter and energy of formation of B2 RuAl as a function of stoichiometry and the lattice parameter of (Ru(sub 50-x)Ni(sub x)Al(sub 50)) alloys as a function of Ni concentration are computed. BFS based Monte Carlo simulations indicate that compositions close to Ru25Ni25Al50 are single phase with no obvious evidence of a miscibility gap and separation of the individual B2 phases.

  5. Al6H18: A baby crystal of γ-AlH3

    NASA Astrophysics Data System (ADS)

    Kiran, B.; Kandalam, Anil K.; Xu, Jing; Ding, Y. H.; Sierka, M.; Bowen, K. H.; Schnöckel, H.

    2012-10-01

    Using global-minima search methods based on the density functional theory calculations of (AlH3)n (n = 1-8) clusters, we show that the growth pattern of alanes for n ≥ 4 is dominated by structures containing hexa-coordinated Al atoms. This is in contrast to the earlier studies where either linear or ring structures of AlH3 were predicted to be the preferred structures in which the Al atoms can have a maximum of five-fold coordination. Our calculations also reveal that the Al6H18 cluster, with its hexa-coordination of the Al atoms, resembles the unit-cell of γ-AlH3, thus Al6H18 is designated as the "baby crystal." The fragmentation energies of the (AlH3)n (n = 2-8) along with the dimerization energies for even n clusters indicate an enhanced stability of the Al6H18 cluster. Both covalent (hybridization) and ionic (charge) contribution to the bonding are the driving factors in stabilizing the isomers containing hexa-coordinated Al atoms.

  6. 27Al MQMAS of the δ-Al 13-Keggin

    DOE PAGES

    Pilgrim, C. D.; Callahan, J. R.; Colla, C. A.; ...

    2017-01-20

    Here, one-dimensional 27Al, 23Na Magic-Angle-Spinning (MAS) NMR and 27Al Multiple-Quantum Magic-Angle-Spinning NMR (MQMAS) measurements are reported for the δ-isomer of the Al 13 Keggin structure at high spinning speed and 14.1 T field. Values for the CQ and η parameters are on the same scale as those seen in other isomers of the Al 13 structure. Density functional theory (DFT) calculations are performed for comparison to the experimental fits using the B3PW91/6-31+G* and PBE0/6-31+G* levels of theory, with the Polarizable Continuum Model (PCM).

  7. Pressure induced coordination change of Al in silicate melts from Al K edge XANES of high pressure NaAlSi2O6-NaAlSi3O8 glasses

    NASA Astrophysics Data System (ADS)

    Li, Dien; Secco, R. A.; Bancroft, G. M.; Fleet, M. E.

    Aluminum K-edge XANES spectra of high pressure and high temperature (4.4 GPa and 1575°C) glasses along the NaAlSi2O6 (Jd)-NaAlSi3O8 (Ab) join are reported using synchrotron radiation, and shown to provide direct experimental evidence for the pressure-induced coordination change of Al. Five- and six-fold coordinated Al (5Al and 6Al), characterized by Al K-edge positions at 1567.8 and 1568.7 eV, respectively, first appear in glass of composition Jd60Ab40 and increase in proportion progressively with increasing Jd content. The end-member jadeite glass contains about 6% of each of 5Al and 6Al. The present direct measurements confirm literature suggestions for the important role of Al in controlling viscosity and diffusion in mantle melts.

  8. Assessing behavioural changes in ALS: cross-validation of ALS-specific measures.

    PubMed

    Pinto-Grau, Marta; Costello, Emmet; O'Connor, Sarah; Elamin, Marwa; Burke, Tom; Heverin, Mark; Pender, Niall; Hardiman, Orla

    2017-07-01

    The Beaumont Behavioural Inventory (BBI) is a behavioural proxy report for the assessment of behavioural changes in ALS. This tool has been validated against the FrSBe, a non-ALS-specific behavioural assessment, and further comparison of the BBI against a disease-specific tool was considered. This study cross-validates the BBI against the ALS-FTD-Q. Sixty ALS patients, 8% also meeting criteria for FTD, were recruited. All patients were evaluated using the BBI and the ALS-FTD-Q, completed by a carer. Correlational analysis was performed to assess construct validity. Precision, sensitivity, specificity, and overall accuracy of the BBI when compared to the ALS-FTD-Q, were obtained. The mean score of the whole sample on the BBI was 11.45 ± 13.06. ALS-FTD patients scored significantly higher than non-demented ALS patients (31.6 ± 14.64, 9.62 ± 11.38; p < 0.0001). A significant large positive correlation between the BBI and the ALS-FTD-Q was observed (r = 0.807, p < 0.0001), and no significant correlations between the BBI and other clinical/demographic characteristics indicate good convergent and discriminant validity, respectively. 72% of overall concordance was observed. Precision, sensitivity, and specificity for the classification of severely impaired patients were adequate. However, lower concordance in the classification of mild behavioural changes was observed, with higher sensitivity using the BBI, most likely secondary to BBI items which endorsed behavioural aspects not measured by the ALS-FTD-Q. Good construct validity has been further confirmed when the BBI is compared to an ALS-specific tool. Furthermore, the BBI is a more comprehensive behavioural assessment for ALS, as it measures the whole behavioural spectrum in this condition.

  9. Doping and compensation in Al-rich AlGaN grown on single crystal AlN and sapphire by MOCVD

    NASA Astrophysics Data System (ADS)

    Bryan, Isaac; Bryan, Zachary; Washiyama, Shun; Reddy, Pramod; Gaddy, Benjamin; Sarkar, Biplab; Breckenridge, M. Hayden; Guo, Qiang; Bobea, Milena; Tweedie, James; Mita, Seiji; Irving, Douglas; Collazo, Ramon; Sitar, Zlatko

    2018-02-01

    In order to understand the influence of dislocations on doping and compensation in Al-rich AlGaN, thin films were grown by metal organic chemical vapor deposition (MOCVD) on different templates on sapphire and low dislocation density single crystalline AlN. AlGaN grown on AlN exhibited the highest conductivity, carrier concentration, and mobility for any doping concentration due to low threading dislocation related compensation and reduced self-compensation. The onset of self-compensation, i.e., the "knee behavior" in conductivity, was found to depend only on the chemical potential of silicon, strongly indicating the cation vacancy complex with Si as the source of self-compensation. However, the magnitude of self-compensation was found to increase with an increase in dislocation density, and consequently, AlGaN grown on AlN substrates demonstrated higher conductivity over the entire doping range.

  10. The Existence of a Designer Al=Al Double Bond in the LiAl2 H4- Cluster Formed by Electronic Transmutation.

    PubMed

    Lundell, Katie A; Zhang, Xinxing; Boldyrev, Alexander I; Bowen, Kit H

    2017-12-22

    The Al=Al double bond is elusive in chemistry. Herein we report the results obtained via combined photoelectron spectroscopy and ab initio studies of the LiAl 2 H 4 - cluster that confirm the formation of a conventional Al=Al double bond. Comprehensive searches for the most stable structures of the LiAl 2 H 4 - cluster have shown that the global minimum isomer I possesses a geometric structure which resembles that of Si 2 H 4 , demonstrating a successful example of the transmutation of Al atoms into Si atoms by electron donation. Theoretical simulations of the photoelectron spectrum discovered the coexistence of two isomers in the ion beam, including the one with the Al=Al double bond. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. Lou Gehrig's Disease (ALS)

    MedlinePlus

    ... for Educators Search English Español Lou Gehrig's Disease (ALS) KidsHealth / For Kids / Lou Gehrig's Disease (ALS) What's ... with ALS in the 1930s. What Happens in ALS? ALS damages motor neurons in the brain and ...

  12. Characterization of N-polar AlN in GaN/AlN/(Al,Ga)N heterostructures grown by metal-organic chemical vapor deposition

    NASA Astrophysics Data System (ADS)

    Li, Haoran; Mazumder, Baishakhi; Bonef, Bastien; Keller, Stacia; Wienecke, Steven; Speck, James S.; Denbaars, Steven P.; Mishra, Umesh K.

    2017-11-01

    In GaN/(Al,Ga)N high-electron-mobility transistors (HEMT), AlN interlayer between GaN channel and AlGaN barrier suppresses alloy scattering and significantly improves the electron mobility of the two-dimensional electron gas. While high concentrations of gallium were previously observed in Al-polar AlN interlayers grown by metal-organic chemical vapor deposition, the N-polar AlN (Al x Ga1-x N) films examined by atom probe tomography in this study exhibited aluminum compositions (x) equal to or higher than 95% over a wide range of growth conditions. The also investigated AlN interlayer in a N-polar GaN/AlN/AlGaN/ S.I. GaN HEMT structure possessed a similarly high x content.

  13. Pure AlN layers in metal-polar AlGaN/AlN/GaN and AlN/GaN heterostructures grown by low-temperature ammonia-based molecular beam epitaxy

    NASA Astrophysics Data System (ADS)

    Kaun, Stephen W.; Mazumder, Baishakhi; Fireman, Micha N.; Kyle, Erin C. H.; Mishra, Umesh K.; Speck, James S.

    2015-05-01

    When grown at a high temperature (820 °C) by ammonia-based molecular beam epitaxy (NH3-MBE), the AlN layers of metal-polar AlGaN/AlN/GaN heterostructures had a high GaN mole fraction (∼0.15), as identified by atom probe tomography in a previous study (Mazumder et al 2013 Appl. Phys. Lett. 102 111603). In the study presented here, growth at low temperature (<740 °C) by NH3-MBE yielded metal-polar AlN layers that were essentially pure at the alloy level. The improved purity of the AlN layers grown at low temperature was correlated to a dramatic increase in the sheet density of the two-dimensional electron gas (2DEG) at the AlN/GaN heterointerface. Through application of an In surfactant, metal-polar AlN(3.5 nm)/GaN and AlGaN/AlN(2.5 nm)/GaN heterostructures grown at low temperature yielded low 2DEG sheet resistances of 177 and 285 Ω/□, respectively.

  14. Interdiffusion in U 3Si-Al, U 3Si 2-Al, and USi-Al dispersion fuels during irradiation

    NASA Astrophysics Data System (ADS)

    Kim, Yeon Soo; Hofman, Gerard L.

    2011-03-01

    Uranium-silicide compound fuel dispersion in an Al matrix is used in research and test reactors worldwide. Interaction layer (IL) growth between fuel particles and the matrix is one of performance issues. The interaction layer growth data for U 3Si, U 3Si 2 and USi dispersions in Al were obtained from both out-of-pile and in-pile tests. The IL is dominantly U(AlSi) 3 from out-of-pile tests, but its (Al + Si)/U ratio from in-pile tests is higher than the out-of-pile data, because of amorphous behavior of the ILs. IL growth correlations were developed for U 3Si-Al and U 3Si 2-Al. The IL growth rates were dependent on the U/Si ratio of the fuel compounds. During irradiation, however, the IL growth rates did not decrease with the decreasing U/Si ratio by fission. It is reasoned that transition metal fission products in the IL compensate the loss of U atoms by providing chemical potential for Al diffusion and volume expansion by solid swelling and gas bubble swelling. The addition of Mo in U 3Si 2 reduces the IL growth rate, which is similar to that of UMo alloy dispersion in a silicon-added Al matrix.

  15. ALS - resources

    MedlinePlus

    Resources - ALS ... The following organizations are good resources for information on amyotrophic lateral sclerosis : Muscular Dystrophy Association -- www.mda.org/disease/amyotrophic-lateral-sclerosis National Amyotrophic Lateral Sclerosis (ALS) ...

  16. Study of the Al m 26 ( d , p ) Al 27 Reaction and the Influence of the Al 26 0 + Isomer on the Destruction of Al 26 in the Galaxy

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Almaraz-Calderon, S.; Rehm, K. E.; Gerken, N.

    The existence of 26Al (t 1/2 = 7.17 × 10 5 yr) in the interstellar medium provides a direct confirmation of ongoing nucleosynthesis in the Galaxy. The presence of a low-lying 0 + isomer ( 26Al m), however, severely complicates the astrophysical calculations. Here we present for the first time a study of the 26Al m (d, p) 27 Al reaction using an isomeric 26Al beam. The selectivity of this reaction allowed the study of ℓ = 0 transfers to T = 1/2, and T = 3/2 states in 27Al . Mirror symmetry arguments were then used to constrain themore » 26Al m (p,γ) 27Si reaction rate and provide an experimentally determined upper limit of the rate for the destruction of isomeric 26Al via radiative proton capture reactions, which is expected to dominate the destruction path of 26Al m in asymptotic giant branch stars, classical novae, and core collapse supernovae.« less

  17. Study of the Al m 26 ( d , p ) Al 27 Reaction and the Influence of the Al 26 0 + Isomer on the Destruction of Al 26 in the Galaxy

    DOE PAGES

    Almaraz-Calderon, S.; Rehm, K. E.; Gerken, N.; ...

    2017-08-17

    The existence of 26Al (t 1/2 = 7.17 × 10 5 yr) in the interstellar medium provides a direct confirmation of ongoing nucleosynthesis in the Galaxy. The presence of a low-lying 0 + isomer ( 26Al m), however, severely complicates the astrophysical calculations. Here we present for the first time a study of the 26Al m (d, p) 27 Al reaction using an isomeric 26Al beam. The selectivity of this reaction allowed the study of ℓ = 0 transfers to T = 1/2, and T = 3/2 states in 27Al . Mirror symmetry arguments were then used to constrain themore » 26Al m (p,γ) 27Si reaction rate and provide an experimentally determined upper limit of the rate for the destruction of isomeric 26Al via radiative proton capture reactions, which is expected to dominate the destruction path of 26Al m in asymptotic giant branch stars, classical novae, and core collapse supernovae.« less

  18. Study of the ^{26}Al^{m}(d,p)^{27}Al Reaction and the Influence of the ^{26}Al 0^{+} Isomer on the Destruction of ^{26}Al in the Galaxy.

    PubMed

    Almaraz-Calderon, S; Rehm, K E; Gerken, N; Avila, M L; Kay, B P; Talwar, R; Ayangeakaa, A D; Bottoni, S; Chen, A A; Deibel, C M; Dickerson, C; Hanselman, K; Hoffman, C R; Jiang, C L; Kuvin, S A; Nusair, O; Pardo, R C; Santiago-Gonzalez, D; Sethi, J; Ugalde, C

    2017-08-18

    The existence of ^{26}Al (t_{1/2}=7.17×10^{5}  yr) in the interstellar medium provides a direct confirmation of ongoing nucleosynthesis in the Galaxy. The presence of a low-lying 0^{+} isomer (^{26}Al^{m}), however, severely complicates the astrophysical calculations. We present for the first time a study of the ^{26}Al^{m}(d,p)^{27}Al reaction using an isomeric ^{26}Al beam. The selectivity of this reaction allowed the study of ℓ=0 transfers to T=1/2, and T=3/2 states in ^{27}Al. Mirror symmetry arguments were then used to constrain the ^{26}Al^{m}(p,γ)^{27}Si reaction rate and provide an experimentally determined upper limit of the rate for the destruction of isomeric ^{26}Al via radiative proton capture reactions, which is expected to dominate the destruction path of ^{26}Al^{m} in asymptotic giant branch stars, classical novae, and core collapse supernovae.

  19. Reduced electron back-injection in Al2O3/AlOx/Al2O3/graphene charge-trap memory devices

    NASA Astrophysics Data System (ADS)

    Lee, Sejoon; Song, Emil B.; Min Kim, Sung; Lee, Youngmin; Seo, David H.; Seo, Sunae; Wang, Kang L.

    2012-12-01

    A graphene charge-trap memory is devised using a single-layer graphene channel with an Al2O3/AlOx/Al2O3 oxide stack, where the ion-bombarded AlOx layer is intentionally added to create an abundance of charge-trap sites. The low dielectric constant of AlOx compared to Al2O3 reduces the potential drop in the control oxide Al2O3 and suppresses the electron back-injection from the gate to the charge-storage layer, allowing the memory window of the device to be further extended. This shows that the usage of a lower dielectric constant in the charge-storage layer compared to that of the control oxide layer improves the memory performance for graphene charge-trap memories.

  20. La función de la EPA para la protección contra la radiación

    EPA Pesticide Factsheets

    Conforme al mandato congresional, la Agencia de Protección Ambiental de EE.UU. el la entidad responsable de establecer normas para proteger la salud humana y el medioambiente de materiales radioactivos.

  1. 77 FR 73732 - In the Matter of Amendment of the Designation of al-Qa'ida in Iraq, aka Jam'at al Tawhid wa'al...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-11

    ...'ida in Iraq, aka Jam'at al Tawhid wa'al-Jihad, aka The Monotheism and Jihad Group, aka The al-Zarqawi Network, aka al-Tawhid, aka Tanzim Qa`idat al-Jihad fi Bilad al-Rafidayn, aka The Organization of al-Jihad... Rivers, aka al-Qaida of Jihad Organization in the Land of the Two Rivers, aka al- Qaida Group of Jihad in...

  2. Phenotypic and genotypic studies of ALS cases in ALS-SMA families.

    PubMed

    Corcia, Philippe; Vourc'h, Patrick; Blasco, Helene; Couratier, Philippe; Dangoumau, Audrey; Bellance, Remi; Desnuelle, Claude; Viader, Fausto; Pautot, Vivien; Millecamps, Stephanie; Bakkouche, Salah; Salachas, FranÇois; Andres, Christian R; Meininger, Vincent; Camu, William

    2018-08-01

    Amyotrophic lateral sclerosis (ALS) and spinal muscular atrophy (SMA) are the most frequent motor neuron disorders in adulthood and infancy, respectively. There is a growing literature supporting common pathophysiological patterns between those disorders. One important clinical issue for that is the co-occurrence of both diseases within a family. To collect families in which ALS and SMA patients co-exist and describe the phenotype and the genotype of ALS patients. Nine families with co-occurrence of SMA and ALS have been gathered over the last 15 years. Epidemiological, phenotype and genetic status were collected. Out of the nine families, six corresponded to the criteria of familial ALS (FALS). Clinical data were available for 11 patients out of the 15 ALS cases. Mean age of onset was 58.5 years, site of onset was lower limbs in nine cases (81.8%), median duration was 22 months. Four ALS patients carried a mutation: three mutations in SOD1 gene (G147N in two cases and one with E121G) and one repeat expansion in the C9ORF72 gene. Three patients had abnormal SMN1 copy numbers. While the high proportion of familial history of ALS cases in these ALS-SMA pedigrees could have suggested that these familial clusters of the two most frequent MND rely on a genetic background, we failed to exclude that this occurred by chance.

  3. Distribution and size of lava shields on the Al Haruj al Aswad and the Al Haruj al Abyad Volcanic Systems, Central Libya

    NASA Astrophysics Data System (ADS)

    Elshaafi, Abdelsalam; Gudmundsson, Agust

    2017-05-01

    The Al Haruj Volcanic Province (AHVP) consists of two distinct volcanic systems. In the north is the system of Al Haruj al Aswad, covering an area of 34,200 km2, while in the south the system of Al Haruj al Abyad, covering an area of 7,850 km2. The systems have produced some 432 monogenetic volcanoes, primarily scoria (cinder) cones, lava shields, and maars. The density distribution of the volcanoes in each system, plotted as eruption points or sites, has a roughly elliptical surface expression, suggesting similar plan-view geometry of the magma sources, here suggested as deep-seated reservoirs. More specifically, the Al Haruj al Aswad magma reservoir has major and minor axes of 210 km and 119 km, respectively, and an area of 19,176 km2, the corresponding figures for the Haruj al Abyad reservoir being 108 km and 74 km, for the axes, and 6209 km2 for the area. We measured 55 lava shields on the AHVP. They are mostly restricted to the northern and southern parts of AHVP and date from late Miocene to (at least) the end of Pleistocene, while some may have been active into Holocene. In fact, although primarily monogenetic, some of the lava shields show evidence of (possibly Holocene) fissure eruptions in the summit parts. The early lava shields tend to be located at the edges of volcanic systems and with greater volumes than later (more central) shields. The average lava shield basal diameter is 4.5 km and height 63 m. There is strong linear correlation between lava shield volume and basal area, the coefficient of determination (R2) being about 0.75. When 22 Holocene Icelandic lava shields are added to the dataset, for comparison, the correlation between volume and basal area becomes R2 = 0.95. Numerical models suggest that the local stress fields favoured rupture and dyke injection at the margins of the source reservoirs during late Miocene - early Pliocene, in agreement with the distribution of the early, large-volume shields.

  4. Formation of gamma'-Ni3Al via the Peritectoid Reaction: gamma plus beta (+Al2O3) equals gamma'(+Al2O3)

    NASA Technical Reports Server (NTRS)

    Copland, Evan

    2008-01-01

    The activities of Al and Ni were measured using multi-cell Knudsen effusion-cell mass spectrometry (multi-cell KEMS), over the composition range 8 - 32 at.%Al and temperature range T = 1400 - 1750 K in the Ni-Al-O system. These measurements establish that equilibrium solidification of gamma'-Ni3Al-containing alloys occurs by the eutectic reaction, L (+ Al2O3) = gamma + beta (+ Al2O3), at 1640 plus or minus 1 K and a liquid composition of 24.8 plus or minus 0.2 at.%Al (at an unknown oxygen content). The {gamma + beta + Al2O3} phase field is stable over the temperature range 1633 - 1640 K, and gamma'-Ni3Al forms via the peritectiod, gamma + beta (+ Al2O3) = gamma'(+ Al2O3), at 1633 plus or minus 1 K. This behavior is inconsistent with the current Ni-Al phase diagram and a new diagram is proposed. This new Ni-Al phase diagram explains a number of unusual steady state solidification structures reported previously and provides a much simpler reaction scheme in the vicinity of the gamma'-Ni3Al phase field.

  5. Directional Solidification and Mechanical Properties of NiAl-NiAlTa Alloys

    NASA Technical Reports Server (NTRS)

    Johnson, D. R.; Chen, X. F.; Oliver, B. F.; Noebe, R. D.; Whittenberger, J. D.

    1995-01-01

    Directional solidification of eutectic alloys is a promising technique for producing in-situ composite materials exhibiting a balance of properties. Consequently, the microstructure, creep strength and fracture toughness of directionally solidified NiAl-NiAlTa alloys were investigated. Directional solidification was performed by containerless processing techniques to minimize alloy contamination. The eutectic composition was found to be NiAl-15.5 at% Ta and well-aligned microstructures were produced at this composition. A near-eutectic alloy of NiAl-14.5Ta was also investigated. Directional solidification of the near-eutectic composition resulted in microstructures consisting of NiAl dendrites surrounded by aligned eutectic regions. The off-eutectic alloy exhibited promising compressive creep strengths compared to other NiAl-based intermetallics, while preliminary testing indicated that the eutectic alloy was competitive with Ni-base single crystal superalloys. The room temperature toughness of these two-phase alloys was similar to that of polycrystalline NiAl even with the presence of the brittle Laves phase NiAlTa.

  6. Theory and X-ray Absorption Spectroscopy for Aluminum Coordination Complexes – Al K-Edge Studies of Charge and Bonding in (BDI)Al, (BDI)AlR2, and (BDI)AlX2 Complexes.

    PubMed

    Altman, Alison B; Pemmaraju, C D; Camp, Clément; Arnold, John; Minasian, Stefan G; Prendergast, David; Shuh, David K; Tyliszczak, Tolek

    2015-08-19

    Polarized aluminum K-edge X-ray absorption near edge structure (XANES) spectroscopy and first-principles calculations were used to probe electronic structure in a series of (BDI)Al, (BDI)AlX2, and (BDI)AlR2 coordination compounds (X = F, Cl, I; R = H, Me; BDI = 2,6-diisopropylphenyl-β-diketiminate). Spectral interpretations were guided by examination of the calculated transition energies and polarization-dependent oscillator strengths, which agreed well with the XANES spectroscopy measurements. Pre-edge features were assigned to transitions associated with the Al 3p orbitals involved in metal-ligand bonding. Qualitative trends in Al 1s core energy and valence orbital occupation were established through a systematic comparison of excited states derived from Al 3p orbitals with similar symmetries in a molecular orbital framework. These trends suggested that the higher transition energies observed for (BDI)AlX2 systems with more electronegative X(1-) ligands could be ascribed to a decrease in electron density around the aluminum atom, which causes an increase in the attractive potential of the Al nucleus and concomitant increase in the binding energy of the Al 1s core orbitals. For (BDI)Al and (BDI)AlH2 the experimental Al K-edge XANES spectra and spectra calculated using the eXcited electron and Core-Hole (XCH) approach had nearly identical energies for transitions to final state orbitals of similar composition and symmetry. These results implied that the charge distributions about the aluminum atoms in (BDI)Al and (BDI)AlH2 are similar relative to the (BDI)AlX2 and (BDI)AlMe2 compounds, despite having different formal oxidation states of +1 and +3, respectively. However, (BDI)Al was unique in that it exhibited a low-energy feature that was attributed to transitions into a low-lying p-orbital of b1 symmetry that is localized on Al and orthogonal to the (BDI)Al plane. The presence of this low-energy unoccupied molecular orbital on electron-rich (BDI)Al distinguishes

  7. The effectiveness of a community health program in improving diabetes knowledge in the Hispanic population: Salud y Bienestar (Health and Wellness).

    PubMed

    Cruz, Yanira; Hernandez-Lane, Maria-Eugenia; Cohello, Janet I; Bautista, Christian T

    2013-12-01

    We evaluated the effectiveness of the Salud y Bienestar program to deliver diabetes education in the Hispanic population in the United States. This program uses a community outreach model where community health promoters are trained and then they deliver education to other community members regarding diabetes disease, risk factors, and ways to prevent and control disease. This intervention applies a one-group pre- and post-test design to improve diabetes knowledge. The intervention carried out in the states of California, Texas, and Washington DC. A total of 1,413 participants were enrolled. Of these, 73% were females, 46% were 65 years or older, 59% were Mexican, 64% had at least elementary education, 56% had lived in the US for more than 20 years, and 38% participants were self-reported diabetic. Among diabetic participants, a significant improvement was observed on diabetes knowledge when comparing pre- and post-test scores (13.7 vs. 18.6, P < 0.001; Cohen's d = 1.2). Among non-diabetic participants, diabetes knowledge also increased significantly after one-single training session (12.9 vs. 18.2, P < 0.001; Cohen's d = 1.2). The Salud y Bienestar program conducted by community health workers was effective approach to improving diabetes knowledge in the Hispanic population.

  8. Development of Al2O3 fiber-reinforced Al2O3-based ceramics.

    PubMed

    Tanimoto, Yasuhiro; Nemoto, Kimiya

    2004-09-01

    The purpose of this study was to use a tape casting technique to develop an Al2O3 fiber-reinforced Al2O3-based ceramic material (Al2O3-fiber/Al2O3 composite) into a new type of dental ceramic. The Al2O3-based ceramic used a matrix consisting of 60 wt% Al2O3 powder and 40 wt% SiO2-B2O3 powder. The prepreg sheets of Al2O3-fiber/Al2O3 composite (in which uniaxially aligned Al2O3 fibers were infiltrated with the Al2O3-based matrix) were fabricated continuously using tape casting technique with a doctor blade system. Multilayer preforms of Al2O3-fiber/Al2O3 composite sheets were then sintered at a maximum temperature of 1000 degrees C under an atmospheric pressure in a furnace. The results showed that the shrinkage and bending properties of Al2O3-fiber/Al2O3 composite exceeded those of unreinforced Al2O3--hence demonstrating the positive effects of fiber reinforcement. In conclusion, the tape casting technique has been utilized to successfully develop a new type of dental ceramic material.

  9. NiAl-base composite containing high volume fraction of AlN for advanced engines

    NASA Technical Reports Server (NTRS)

    Hebsur, Mohan (Inventor); Whittenbeger, John D. (Inventor); Lowell, Carl F. (Inventor)

    1994-01-01

    A particulate reinforced NiAl-AlN composite alloy has a NiAl matrix and greater than about 13 volume percent fine particles of AlN within the matrix. The particles preferably have a diameter from about 15 nanometers to about 50 nanometers. The particulate reinforced NiAl-AlN composite alloy may be prepared by cryomilling prealloyed NiAl in liquid nitrogen using grinding media having a diameter of from about 2 to 6 mm at an impeller speed of from about 450 RPM to about 800 RPM. The cryomilling may be done for a duration of from about 4 hours to about 20 hours to obtain a cryomilled powder. The cryomilled powder may be consolidated to form the particulate reinforced NiAl-AlN composite alloy. The particulate reinforced alloy can further include a toughening alloy. The toughening alloy may include NiCrAlY, FeCrAlY, and FeAl.

  10. Molecular dynamics study of Al and Ni 3Al sputtering by Al clusters bombardment

    NASA Astrophysics Data System (ADS)

    Zhurkin, Eugeni E.; Kolesnikov, Anton S.

    2002-06-01

    The sputtering of Al and Ni 3Al (1 0 0) surfaces induced by impact of Al ions and Al N clusters ( N=2,4,6,9,13,55) with energies of 100 and 500 eV/atom is studied at atomic scale by means of classical molecular dynamics (MD). The MD code we used implements many-body tight binding potential splined to ZBL at short distances. Special attention has been paid to model dense cascades: we used quite big computation cells with lateral periodic and damped boundary conditions. In addition, long simulation times (10-25 ps) and representative statistics (up to 1000 runs per each case) were considered. The total sputtering yields, energy and time spectrums of sputtered particles, as well as preferential sputtering of compound target were analyzed, both in the linear and non-linear regimes. The significant "cluster enhancement" of sputtering yield was found for cluster sizes N⩾13. In parallel, we estimated collision cascade features depending on cluster size in order to interpret the nature of observed non-linear effects.

  11. Barriers to Breast Cancer Screening among Latinas in the U.S.-Mexico Border Region

    DTIC Science & Technology

    2011-05-01

    la Salud : A breast and cervical... en in g E ve r ha d a m am m og ra m H ad a M am m og ra m w ith in th e la st 2 ye ar s H ad a m am m og ra m w ith in th e la st ye ar U na dj us...Cancer Society, Atlanta, GA 22. Fernandez ME, Gonzales A, Tortolero-Luna G et al (2009) Effectiveness of Cultivando la Salud : a breast and cervical

  12. Salud para su Corazón: a community-based Latino cardiovascular disease prevention and outreach model.

    PubMed

    Alcalay, R; Alvarado, M; Balcazar, H; Newman, E; Huerta, E

    1999-10-01

    Cardiovascular disease (CVD) is the leading cause of death for Latinos living in the United States. This population is generally unaware of important lifestyle or behavioral changes that can prevent CVD. The National Heart, Lung, and Blood Institute (NHLBI) designed and implemented Salud para su Corazón (Health for Your Heart), a culturally appropriate, community-based, theory-driven intervention model. NHLBI's goals were: (1) to design an intervention model appropriate to Latino populations; (2) to pilot test the model in a specific community with the objectives of increasing awareness about heart disease, raising knowledge about CVD prevention, and promoting heart-healthy lifestyles; and (3) to disseminate the model and the materials developed to other communities with similar needs. An agency-community partnership, under the leadership of the Community Alliance for Heart Health, guided all stages of the community intervention project. The multimedia bilingual community intervention included television telenovela format public service announcements (PSAs), radio programs, brochures, recipe booklets, charlas, a promotores training manual, and motivational videos. An evaluation survey assessed the impact of the intervention. A pre-post intervention survey was conducted with more than 300 participants, and results showed that the respondents were substantially more aware of risk factors for CVD, and had greatly increased their knowledge of ways to prevent heart disease. Dissemination efforts have resulted in numerous requests by health organizations, universities, and health maintenance organizations (HMOs) for educational materials and communication strategies produced by Salud para su Corazón. In addition, Univision, the largest Spanish-language broadcast television network, is airing the initiative's PSAs. Also, training seminars for promotores are being conducted in different regions of the United States, and several locations are planning to replicate this

  13. Nb/Al-AlOx/Nb Edge Junctions for Distributed Mixers

    NASA Astrophysics Data System (ADS)

    Amos, R. S.; Lichtenberger, A. W.; Tong, C. E.; Blundell, R.; Pan, S.-K.; Kerr, A. R.

    We have fabricated high quality Nb/Al-oxide/Al/Nb edge junctions using a Nb/SiO/sub 2/ bi-layer film as the base electrode, suitable for use as traveling wave mixers. An edge is cut in the bi-layer with an ion gun at a 45 degree angle using a photoresist mask. The wafer is then cleaned in-situ with a physical ion gun clean followed by the deposition of a thin Al (a1) film, which is then thermally oxidized, an optional second Al (a2) layer, and a Nb counter electrode. It was found that devices with an a2 layer resulted in superior electrical characteristics, though proximity effects increased strongly with a2 thickness. The counter electrode is defined with an SF/sub 6/+N/sub 2/ reactive ion etch, using the Al barrier layer as an etch stop. The Al barrier layer is then either removed with an Al wet etch to isolate the individual devices, or the devices are separated with an anodization process. Various ion gun cleaning conditions have been examined; in addition, both wet and plasma etch bi-layer edge surface pre-treatments were investigated. It was found that edge junctions with large widths (i.e., those more suitable for traveling wave mixers) typically benefited more from such treatments. Initial receiver results at 260 GHz have yielded a DSB noise temperature of 60 K.

  14. Photoelectrical, photophysical and photocatalytic properties of Al based MOFs: MIL-53(Al) and MIL-53-NH{sub 2}(Al)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    An, Yang; Li, Huiliang; Liu, Yuanyuan, E-mail: yyliu@sdu.edu.cn

    Two Al based MOFs (MIL-53(Al) and MIL-53-NH{sub 2} (Al)) were synthesized, and their photoelectrical, photophysical and photocatalytic properties towards oxygen evolution from water were investigated. Different from the ligand to metal charge transfer process previously reported, we proposes a new photocatalytic mechanism based on electron tunneling according to the results of theoretical calculation, steady state and time resolved fluorescence spectra. The organic linkers absorb photons, giving rise to electrons and holes. Then, the photogenerated electrons tunnel through the AlO{sub 6}-octahedra, which not only inhibit the recombination of photogenerated charge carriers, but also is a key factor to the photocatalytic activitymore » of Al based MOFs. - Graphical abstract: The photoelectrical, photophysical and photocatalytic properties towards oxygen evolution from water of two Al based MOFs were investigated. A new photocatalytic mechanism was proposed based on electron tunneling according to the results of both theoretical calculation and steady state, time resolved fluorescence spectra. The electron tunneling process not only inhibit the recombination of photogenerated charge carriers, but also is a key factor to the photocatalytic activity of Al based MOFs.« less

  15. Oxidation of Al2O3 continuous fiber-reinforced/NiAl composites

    NASA Technical Reports Server (NTRS)

    Doychak, J.; Nesbitt, J. A.; Noebe, R. D.; Bowman, R. R.

    1992-01-01

    The 1200 C and 1300 C isothermal and cyclic oxidation behavior of Al2O3 continuous fiber-reinforced/NiAl composites were studied. Oxidation resulted in formation of Al2O3 external scales in a similar manner as scales formed on monolithic NiAl. The isothermal oxidation of an Al2O3/NiAl composite resulted in oxidation of the matrix along the fiber/matrix interface near the fiber ends. This oxide acted as a wedge between the fiber and the matrix, and, under cyclic oxidation conditions, led to further oxidation along the fiber lengths and eventual cracking of the composite. The oxidation behavior of composites in which the Al2O3 fibers were sputter coated with nickel prior to processing was much more severe. This was attributed to open channels around the fibers which formed during processing, most likely as a result of the diffusion of the nickel coating into the matrix.

  16. Structure of oxides prepared by decomposition of layered double Mg–Al and Ni–Al hydroxides

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Cherepanova, Svetlana V.; Novosibirsk State University, Novosibirsk; Leont’eva, Natalya N., E-mail: n_n_leonteva@list.ru

    2015-05-15

    Abstracts: Thermal decomposition of Mg–Al and Ni–Al layered double hydroxides LDH at temperatures lower than 800 °C leads to the formation of oxides with different structures. Mg–Al oxide has a very defective structure and consists of octahedral layers as in periclase MgO and mixed octahedral–tetrahedral layers as in spinel MgAl{sub 2}O{sub 4}. Mixed Ni–Al oxide has a sandwich-like structure, consisting of a core with Al-doped NiO-like structure and some surface layers with spinel NiAl{sub 2}O{sub 4} structure epitaxial connected with the core. Suggested models were verified by simulation of X-ray diffraction patterns using DIFFaX code, as well as HRTEM, IR-,more » UV-spectroscopies, and XPS. - Graphical abstract: In the Mg–Al layered double hydroxide Al{sup 3+} ions migrate into interlayers during decomposition. The Mg–Al oxide represents sequence of octahedral and octahedral–tetrahedral spinel layers with vacancies. The Ni–Al oxide has a sandwich-like structure with NiO-like core and surface spinel layers as a result of migration of Al{sup 3+} ions on the surface. The models explain the presence and absence of “memory effect” for the Mg–Al and Ni–Al oxides, respectively. - Highlights: • We study products of Mg(Ni)–Al LDH decomposition by calcination at 500(400)–800 °C. • In Mg–Al/Ni–Al LDH Al ions migrate into interlayers/on the surface during decomposition. • Mg–Al oxide represents sequence of periclase- and spinel-like layers with vacancies. • Ni–Al oxide has a sandwich-like structure with NiO-like core and surface spinel layers. • The models explain the presence/absence of “memory effect” for Mg–Al/Ni–Al oxides.« less

  17. Molecular structure of Mg-Al, Mn-Al and Zn-Al halotrichites-type double sulfates--an infrared spectroscopic study.

    PubMed

    Palmer, Sara J; Frost, Ray L

    2011-05-01

    Near infrared (NIR), X-ray diffraction (XRD) and infrared (IR) spectroscopy have been applied to halotrichites of the formula MgAl(2)(SO(4))(4)·22H(2)O, MnAl(2)(SO(4))(4)·22H(2)O and ZnAl(2)(SO(4))(4)·22H(2)O. Comparison of the halotrichites in different spectral regions has shown that the incorporation of a divalent transition metal into the halotrichite structure causes a shift in OH stretching band positions to lower wavenumbers. Therefore, an increase of the hydrogen bond strength of the bonded water is observed for divalent cations with a larger molecular mass. XRD has confirmed the formation of halotrichite for all three samples and characteristic peaks of halotrichite have been identified for each halotrichite-type compound. It has been observed that Mg-Al and Mn-Al halotrichite are very similar in structure, while Zn-Al showed several differences particularly in the NIR spectra. This work has shown that compounds with halotrichite structures can be synthesised and characterised by infrared and NIR spectroscopy. Copyright © 2011 Elsevier B.V. All rights reserved.

  18. Mechanisms of elevated-temperature deformation in the B2 aluminides NiAl and CoAl

    NASA Technical Reports Server (NTRS)

    Yaney, D. L.; Nix, W. D.

    1988-01-01

    A strain rate change technique, developed previously for distinguishing between pure-metal and alloy-type creep behavior, was used to study the elevated-temperature deformation behavior of the intermetallic compounds NiAl and CoAl. Tests on NiAl were conducted at temperatures between 1100 and 1300 K while tests on CoAl were performed at temperatures ranging from 1200 to 1400 K. NiAl exhibits pure-metal type behavior over the entire temperature range studied. CoAl, however, undergoes a transition from pure-metal to alloy-type deformation behavior as the temperature is decreased from 1400 to 1200 K. Slip appears to be inherently more difficult in CoAl than in NiAl, with lattice friction effects limiting the mobility of dislocations at a much higher tmeperature in CoAl than in NiAl. The superior strength of CoAl at elevated temperatures may, therefore, be related to a greater lattice friction strengthening effect in CoAl than in NiAl.

  19. CVD Fiber Coatings for Al2O3/NiAl Composites

    NASA Technical Reports Server (NTRS)

    Boss, Daniel E.

    1995-01-01

    While sapphire-fiber-reinforced nickel aluminide (Al2O3/NiAl) composites are an attractive candidate for high-temperature structures, the significant difference in the coefficient of thermal expansion between the NiAl matrix and the sapphire fiber creates substantial residual stresses in the composite. This study seeks to produce two fiber-coating systems with the potential to reduce the residual stresses in the sapphire/NiAl composite system. Chemical vapor deposition (CVD) was used to produce both the compensating and compliant-fiber coatings for use in sapphire/NiAl composites. A special reactor was designed and built to produce the FGM and to handle the toxic nickel precursors. This process was successfully used to produce 500-foot lengths of fiber with coating thicknesses of approximately 3 microns, 5 microns, and 10 microns.

  20. Study on Mg/Al Weld Seam Based on Zn–Mg–Al Ternary Alloy

    PubMed Central

    Liu, Liming; Liu, Fei; Zhu, Meili

    2014-01-01

    Based on the idea of alloying welding seams, a series of Zn–xAl filler metals was calculated and designed for joining Mg/Al dissimilar metals by gas tungsten arc (GTA) welding. An infrared thermography system was used to measure the temperature of the welding pool during the welding process to investigate the solidification process. It was found that the mechanical properties of the welded joints were improved with the increasing of the Al content in the Zn–xAl filler metals, and when Zn–30Al was used as the filler metal, the ultimate tensile strength could reach a maximum of 120 MPa. The reason for the average tensile strength of the joint increasing was that the weak zone of the joint using Zn–30Al filler metal was generated primarily by α-Al instead of MgZn2. When Zn–40Al was used as the filler metal, a new transition zone, about 20 μm-wide, appeared in the edge of the fusion zone near the Mg base metal. Due to the transition zones consisting of MgZn2- and Al-based solid solution, the mechanical property of the joints was deteriorated. PMID:28788508

  1. Chemical failure modes of AlQ3-based OLEDs: AlQ3 hydrolysis.

    PubMed

    Knox, John E; Halls, Mathew D; Hratchian, Hrant P; Schlegel, H Bernhard

    2006-03-28

    Tris(8-hydroxyquinoline)aluminum(III), AlQ3, is used in organic light-emitting diodes (OLEDs) as an electron-transport material and emitting layer. The reaction of AlQ3 with trace H2O has been implicated as a major failure pathway for AlQ3-based OLEDs. Hybrid density functional calculations have been carried out to characterize the hydrolysis of AlQ3. The thermochemical and atomistic details for this important reaction are reported for both the neutral and oxidized AlQ3/AlQ3+ systems. In support of experimental conclusions, the neutral hydrolysis reaction pathway is found to be a thermally activated process, having a classical barrier height of 24.2 kcal mol(-1). First-principles infrared and electronic absorption spectra are compared to further characterize AlQ3 and the hydrolysis pathway product, AlQ2OH. The activation energy for the cationic AlQ3 hydrolysis pathway is found to be 8.5 kcal mol(-1) lower than for the neutral reaction, which is significant since it suggests a role for charge imbalance in promoting chemical failure modes in OLED devices.

  2. Optical, structural, and nuclear scientific studies of AlGaN with high Al composition

    NASA Astrophysics Data System (ADS)

    Lin, Tse Yang; Chung, Yee Ling; Li, Lin; Yao, Shude; Lee, Y. C.; Feng, Zhe Chuan; Ferguson, Ian T.; Lu, Weijie

    2010-08-01

    AlGaN epilayers with higher Al-compositions were grown by Metalorganic Chemical Vapor Deposition (MOCVD) on (0001) sapphire. Trimethylgallium (TMGa), trimethylaluminium (TMAl) and NH3 were used as the source precursors for Ga, Al, and N, respectively. A 25 nm AlN nucleation layer was first grown at low-temperature of 590 °C at 300 Torr. Followed, AlxGa1-xN layers were grown at 1080 °C on low-temperature AlN nucleation layers. The heterostructures were characterized by a series of techniques, including x-ray diffraction (XRD), Rutherford backscattering (RBS), photoluminescence (PL), scanning electron microscopy (SEM) and Raman scattering. Precise Al compositions were determined through XRD, RBS, and SEM combined measurements. Room Temperature Raman Scattering spectra shows three major bands from AlGaN alloys, which are AlN-like, A1 longitudinal optical (LO) phonon modes, and E2 transverse optical (TO) band, respectively, plus several peak comes from the substrate. Raman spectral line shape analysis lead to an optical determination of the electrical property free carrier concentration of AlGaN. The optical properties of AlGaN with high Al composition were presented here.

  3. Epitaxial growth of Al9Ir2 intermetallic compound on Al(100): Mechanism and interface structure

    NASA Astrophysics Data System (ADS)

    Kadok, J.; Pussi, K.; Šturm, S.; Ambrožič, B.; Gaudry, É.; de Weerd, M.-C.; Fournée, V.; Ledieu, J.

    2018-04-01

    The adsorption of Ir adatoms on Al(100) has been investigated under various exposures and temperature conditions. The experimental and theoretical results reveal a diffusion of Ir adatoms within the Al(100) surface selvedge already at 300 K. Above 593 K, two domains of a (√{5 }×√{5 }) R 26 .6∘ phase are identified by low energy electron diffraction (LEED) and scanning tunneling microscopy measurements. This phase corresponds to the initial growth of an Al9Ir2 compound at the Al(100) surface. The Al9Ir2 intermetallic domains are terminated by bulklike pure Al layers. The structural stability of Al9Ir2 (001) grown on Al(100) has been analyzed by density functional theory based calculations. Dynamical LEED analysis is consistent with an Ir adsorption leading to the growth of an Al9Ir2 intermetallic compound. We propose that the epitaxial relationship Al9Ir2(001 ) ∥Al (100) and Al9Ir2[100 ] ∥Al [031 ]/[013 ] originates from a matching of Al atomic arrangements present both on Al(100) and on pure Al(001) layers present in the Al9Ir2 compound. Finally, the interface between Al9Ir2 precipitates and the Al matrix has been characterized by transmission electron microscopy measurements. The cross-sectional observations are consistent with the formation of Al9Ir2 (001) compounds. These measurements indicate an important Ir diffusion within Al(100) near the surface region. The coherent interface between Al9Ir2 and the Al matrix is sharp.

  4. Formation of gamma(sup prime)-Ni3Al via the Peritectoid Reaction: gamma + beta (+ Al2O3)=gamma(sup prime)(+ Al2O3)

    NASA Technical Reports Server (NTRS)

    Copeland, Evan

    2008-01-01

    The activities of Al and Ni were measured using multi-cell Knudsen effusion-cell mass spectrometry (multi-cell KEMS), over the composition range 8-32 at.%Al and temperature range T=1400-1750 K in the Ni-Al-O system. These measurements establish that equilibrium solidification of gamma(sup prime)-Ni3Al-containing alloys occurs by the eutectic reaction, L (+ Al2O3)=gamma + Beta(+ Al2O3), at 1640 +/- 1 K and a liquid composition of 24.8 +/- 0.2 at.%al (at an unknown oxygen content). The {gamma + Beta (+Al2O3} phase field is stable over the temperature range 1633-1640 K, and gamma(sup prime)-Ni3Al forms via the peritectoid, gamma + Beta (+ Al2O3)=gamma(sup prime) (+ Al2O3), at 1633 +/- 1 K. This behavior is consistent with the current Ni-Al phase diagram and a new diagram is proposed. This new Ni-Al phase diagram explains a number of unusual steady-state solidification structures reported previously and provides a much simpler reaction scheme in the vicinity of the gamma(sup prime)-Ni2Al phase field.

  5. Chemical trend of superconducting transition temperature in hole-doped delafossite of CuAlO2, AgAlO2 and AuAlO2

    NASA Astrophysics Data System (ADS)

    Nakanishi, Akitaka; Katayama-Yoshida, Hiroshi

    2012-12-01

    We have performed the first-principles calculations about the superconducting transition temperature Tc of hole-doped delafossite CuAlO2, AgAlO2 and AuAlO2. Calculated Tc are about 50 K (CuAlO2), 40 K (AgAlO2) and 3 K(AuAlO2) at maximum in the optimum hole-doping concentration. The low Tc of AuAlO2 is attributed to the weak electron-phonon interaction caused by the low covalency and heavy atomic mass.

  6. Atomistic simulation of Al-graphene thin film growth on polycrystalline Al substrate

    NASA Astrophysics Data System (ADS)

    Zhang, Lan; Zhu, Yongchao; Li, Na; Rong, Yan; Xia, Huimin; Ma, Huizhong

    2018-03-01

    The growth of Al-Graphene composite coatings on polycrystalline Al substrate was investigated by using classical molecular dynamics (MD) simulations. Unlike the diffusion behaviors on single crystal surface, most of adatoms were easily bound by the steps on polycrystalline Al surface, owing to the local accelerated energy. Both Ehrlich-Schwoebel (ES) barriers and the steering effect backed up the volmer-weber growth mode, which was consistent with the dynamic growth process observed in the deposit. The morphology of composite coatings was significantly affected by graphene flakes. Enrichment of graphene flakes gave rise to an increase of the local thickness, and graphene flakes only existed in Al grain boundaries. The size of Al grains in the composite coating visibly decreased when compared with that in the pure Al coating. This grain refinement and the mechanical property can be reinforced by the increase of graphene flakes.

  7. Insulator-semiconductor interface fixed charges in AlGaN/GaN metal-insulator-semiconductor devices with Al2O3 or AlTiO gate dielectrics

    NASA Astrophysics Data System (ADS)

    Le, Son Phuong; Nguyen, Duong Dai; Suzuki, Toshi-kazu

    2018-01-01

    We have investigated insulator-semiconductor interface fixed charges in AlGaN/GaN metal-insulator-semiconductor (MIS) devices with Al2O3 or AlTiO (an alloy of Al2O3 and TiO2) gate dielectrics obtained by atomic layer deposition on AlGaN. Analyzing insulator-thickness dependences of threshold voltages for the MIS devices, we evaluated positive interface fixed charges, whose density at the AlTiO/AlGaN interface is significantly lower than that at the Al2O3/AlGaN interface. This and a higher dielectric constant of AlTiO lead to rather shallower threshold voltages for the AlTiO gate dielectric than for Al2O3. The lower interface fixed charge density also leads to the fact that the two-dimensional electron concentration is a decreasing function of the insulator thickness for AlTiO, whereas being an increasing function for Al2O3. Moreover, we discuss the relationship between the interface fixed charges and interface states. From the conductance method, it is shown that the interface state densities are very similar at the Al2O3/AlGaN and AlTiO/AlGaN interfaces. Therefore, we consider that the lower AlTiO/AlGaN interface fixed charge density is not owing to electrons trapped at deep interface states compensating the positive fixed charges and can be attributed to a lower density of oxygen-related interface donors.

  8. 26Al- 26Mg and 207Pb- 206Pb systematics of Allende CAIs: Canonical solar initial 26Al/ 27Al ratio reinstated

    NASA Astrophysics Data System (ADS)

    Jacobsen, Benjamin; Yin, Qing-zhu; Moynier, Frederic; Amelin, Yuri; Krot, Alexander N.; Nagashima, Kazuhide; Hutcheon, Ian D.; Palme, Herbert

    2008-07-01

    The precise knowledge of the initial 26Al/ 27Al ratio [( 26Al/ 27Al) 0] is crucial if we are to use the very first solid objects formed in our Solar System, calcium-aluminum-rich inclusions (CAIs) as the "time zero" age-anchor and guide future work with other short-lived radio-chronometers in the early Solar System, as well as determining the inventory of heat budgets from radioactivities for early planetary differentiation. New high-precision multi-collector inductively-coupled plasma mass spectrometry (MC-ICP-MS) measurements of 27Al/ 24Mg ratios and Mg-isotopic compositions of nine whole-rock CAIs (six mineralogically characterized fragments and three micro-drilled inclusions) from the CV carbonaceous chondrite, Allende yield a well-defined 26Al- 26Mg fossil isochron with an ( 26Al/ 27Al) 0 of (5.23 ± 0.13) × 10 - 5 . Internal mineral isochrons obtained for three of these CAIs ( A44A, AJEF, and A43) are consistent with the whole-rock CAI isochron. The mineral isochron of AJEF with ( 26Al/ 27Al) 0 = (4.96 ± 0.25) × 10 - 5 , anchored to our precisely determined absolute 207Pb- 206Pb age of 4567.60 ± 0.36 Ma for the same mineral separates, reinstate the "canonical" ( 26Al/ 27Al) 0 of 5 × 10 - 5 for the early Solar System. The uncertainty in ( 26Al/ 27Al) 0 corresponds to a maximum time span of ± 20 Ka (thousand years), suggesting that the Allende CAI formation events were culminated within this time span. Although all Allende CAIs studied experienced multistage formation history, including melting and evaporation in the solar nebula and post-crystallization alteration likely on the asteroidal parent body, the 26Al- 26Mg and U-Pb-isotopic systematics of the mineral separates and bulk CAIs behaved largely as closed-system since their formation. Our data do not support the "supra-canonical" 26Al/ 27Al ratio of individual minerals or their mixtures in CV CAIs, suggesting that the supra-canonical 26Al/ 27Al ratio in the CV CAIs may have resulted from post

  9. Effects of Al(III) and Nano-Al13 Species on Malate Dehydrogenase Activity

    PubMed Central

    Yang, Xiaodi; Cai, Ling; Peng, Yu; Li, Huihui; Chen, Rong Fu; Shen, Ren Fang

    2011-01-01

    The effects of different aluminum species on malate dehydrogenase (MDH) activity were investigated by monitoring amperometric i-t curves for the oxidation of NADH at low overpotential using a functionalized multi-wall nanotube (MWNT) modified glass carbon electrode (GCE). The results showed that Al(III) and Al13 can activate the enzymatic activity of MDH, and the activation reaches maximum levels as the Al(III) and Al13 concentration increase. Our study also found that the effects of Al(III) and Al13 on the activity of MDH depended on the pH value and aluminum speciation. Electrochemical and circular dichroism spectra methods were applied to study the effects of nano-sized aluminum compounds on biomolecules. PMID:22163924

  10. Effects of Al(III) and nano-Al13 species on malate dehydrogenase activity.

    PubMed

    Yang, Xiaodi; Cai, Ling; Peng, Yu; Li, Huihui; Chen, Rong Fu; Shen, Ren Fang

    2011-01-01

    The effects of different aluminum species on malate dehydrogenase (MDH) activity were investigated by monitoring amperometric i-t curves for the oxidation of NADH at low overpotential using a functionalized multi-wall nanotube (MWNT) modified glass carbon electrode (GCE). The results showed that Al(III) and Al(13) can activate the enzymatic activity of MDH, and the activation reaches maximum levels as the Al(III) and Al(13) concentration increase. Our study also found that the effects of Al(III) and Al(13) on the activity of MDH depended on the pH value and aluminum speciation. Electrochemical and circular dichroism spectra methods were applied to study the effects of nano-sized aluminum compounds on biomolecules.

  11. [Use of evidence in heath policies and programs contributions of the instituto nacional de salud].

    PubMed

    Gutierrez, Ericson L; Piazza, Marina; Gutierrez-Aguado, Alfonso; Hijar, Gisely; Carmona, Gloria; Caballero, Patricia; Reyes, Nora; Canelo, Carlos; Aparco, Juan Pablo; Tejada, Romina A; Bolaños-Díaz, Rafael; Saravia, Silvia; Gozzer, Ernesto

    2016-01-01

    This article analyzes some examples about how the Ministry of Health of Peru has used evidence for policy and program formulation, implementation and evaluation. It describes the process by which health budget programs are based and strengthened with scientific evidence. Provides an overview about how the development of clinical guidelines methodology is facilitating the generation of high quality evidence based clinical guidelines.It presents some examples of specific information needs of the Ministry of Health to which the Instituto Nacional de Salud has responded, and the impact of that collaboration. Finally, the article proposes future directions for the use of research methodology especially relevant for the development and evaluation of policy and programs, as well as the development of networks of health technology assessment at the national and international level.

  12. Fracture toughness of Ti-Al3Ti-Al-Al3Ti laminate composites under static and cyclic loading conditions

    NASA Astrophysics Data System (ADS)

    Patselov, A. M.; Gladkovskii, S. V.; Lavrikov, R. D.; Kamantsev, I. S.

    2015-10-01

    The static and cyclic fracture toughnesses of a Ti-Al3Ti-Al-Al3Ti laminate composite material containing at most 15 vol % intermetallic compound are studied. Composite specimens are prepared by terminating reaction sintering of titanium and aluminum foils under pressure. The fracture of the titanium layers is quasi-cleavage during cyclic crack growth and is ductile during subsequent static loading.

  13. [Bibliometric study of original articles in the Revista Española de Salud Pública (1991-2000). Part II: authors' productivity, their institutions and geographical areas].

    PubMed

    Estrada Lorenzo, José Manuel; Villar Alvarez, Fernando; Pérez Andrés, Cristina; Rebollo Rodríguez, M José

    2003-01-01

    When characterizing a scientific journal from the bibliometric standpoint, it is of importance to know how many authors were involved in the studies published as well as the geographical areas where these authors are located and the type of institutions by which they are employed. The aim of this article is that of analyzing the geographical spread of these authors and the institutions by which they are employed, as well as its evolution as regards the original articles published in the Revista Española de Salud Pública throughout the 1991-2000 period. Of the original articles published in the Revista Española de Salud Pública throughout the studied ten-year period, a calculation has been made as to the total number of authors, the number of occasional authors (authors having published solely one article), transitivity index, the ratio between the number of male and female authors, the productivity of the authors and their institutions and the spread of authors and the institutions by which they are employed by Autonomous Communities. Of the original articles published in the Revista Española de Salud Pública throughout the 1991-2000 period, a total of 1,052 different authors were involved, 1,000 of whom were Spanish and 52 foreigners. The ratio of male authors to female authors for the period in question was 1.29. The Autonomous Communities from which the largest number of authors came were Community of Madrid (16.3%), Andalusia (13.4%) and the Community of Valencia (12.5%). The institutions by which the authors are employed are located most often in Community of Madrid (16.5%), in Community of Valencia (11.3%) and Andalusia and Catalonia (10.5%). A total of 37.6% of the authors work at centers devoted to health care, followed by authors who work at Universities (26.3%). On calculating the spread of the type of institution by Autonomous Communities, in the Community of Madrid and in the Community of Valencia and Andalusia, the most frequent institution is

  14. Co-existence of a few and sub micron inhomogeneities in Al-rich AlGaN/AlN quantum wells

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Iwata, Yoshiya; Oto, Takao; Banal, Ryan G.

    2015-03-21

    Inhomogeneity in Al-rich AlGaN/AlN quantum wells is directly observed using our custom-built confocal microscopy photoluminescence (μ-PL) apparatus with a reflective system. The μ-PL system can reach the AlN bandgap in the deep ultra-violet spectral range with a spatial resolution of 1.8 μm. In addition, cathodoluminescence (CL) measurements with a higher spatial resolution of about 100 nm are performed. A comparison of the μ-PL and CL measurements reveals that inhomogeneities, which have different spatial distributions of a few- and sub-micron scales that are superimposed, play key roles in determining the optical properties.

  15. Training medical students in the social determinants of health: the Health Scholars Program at Puentes de Salud.

    PubMed

    O'Brien, Matthew J; Garland, Joseph M; Murphy, Katie M; Shuman, Sarah J; Whitaker, Robert C; Larson, Steven C

    2014-01-01

    Given the large influence of social conditions on health, physicians may be more effective if they are trained to identify and address social factors that impact health. Despite increasing interest in teaching the social determinants of health in undergraduate medical education, few models exist. We present a 9-month pilot course on the social determinants of health for medical and other health professional students, which is based at Puentes de Salud, Philadelphia, PA, USA, a community health center serving a Latino immigrant population. This service-learning course, called the Health Scholars Program (HSP), was developed and implemented by volunteer medical and public health faculty in partnership with the community-based clinic. The HSP curriculum combines didactic instruction with service experiences at Puentes de Salud and opportunities for critical reflection. The HSP curriculum also includes a longitudinal project where students develop, implement, and evaluate an intervention to address a community-defined need. In our quantitative evaluation, students reported high levels of agreement with the HSP meeting stated course goals, including developing an understanding of the social determinants of health and working effectively with peers to implement community-based projects. Qualitative assessments revealed students' perception of learning more about this topic in the HSP than in their formal medical training and of developing a long-term desire to serve vulnerable communities as a result. Our experience with the HSP suggests that partnerships between academic medical centers and community-based organizations can create a feasible, effective, and sustainable platform for teaching medical students about the social determinants of health. Similar medical education programs in the future should seek to achieve a larger scale and to evaluate both students' educational experiences and community-defined outcomes.

  16. smokeSALUD: exploring the effect of demographic change on the smoking prevalence at municipality level in Austria.

    PubMed

    Tomintz, Melanie; Kosar, Bernhard; Clarke, Graham

    2016-10-07

    Reducing the smoking population is still high on the policy agenda, as smoking leads to many preventable diseases, such as lung cancer, heart disease, diabetes, and more. In Austria, data on smoking prevalence only exists at the federal state level. This provides an interesting overview about the current health situation, but for regional planning authorities these data are often insufficient as they can hide pockets of high and low smoking prevalence in certain municipalities. This paper presents a spatial-temporal change of estimated smokers for municipalities from 2001 and 2011. A synthetic dataset of smokers is built by combining individual large-scale survey data and small area census data using a deterministic spatial microsimulation approach. Statistical analysis, including chi-square test and binary logistic regression, are applied to find the best variables for the simulation model and to validate its results. As no easy-to-use spatial microsimulation software for non-programmers is available yet, a flexible web-based spatial microsimulation application for health decision support (called simSALUD) has been developed and used for these analyses. The results of the simulation show in general a decrease of smoking prevalence within municipalities between 2001 and 2011 and differences within areas are identified. These results are especially valuable to policy decision makers for future planning strategies. This case study shows the application of smokeSALUD to model the spatial-temporal changes in the smoking population in Austria between 2001 and 2011. This is important as no data on smoking exists at this geographical scale (municipality). However, spatial microsimulation models are useful tools to estimate small area health data and to overcome these problems. The simulations and analysis should support health decision makers to identify hot spots of smokers and this should help to show where to spend health resources best in order to reduce health

  17. Aluminium (Al) speciation in serum and urine after subcutaneous venom immunotherapy with Al as adjuvant.

    PubMed

    Michalke, Bernhard; Kramer, Matthias F; Brehler, Randolf

    2018-02-21

    Aluminium is associated with disorders and is the commonly used vaccine adjuvant. Understanding the mechanisms of how Al is transported, metabolized or of its toxicity depends on the knowledge of Al-interactions with bioligands, i.e. Al-species. Al-speciation in serum is difficult because of low concentration and the risk of exogenous Al contamination. Furthermore, Al-measurements may be hampered according to various interferences. This study aims for developing quality controlled protocols for reliable Al- and Al-species determination and for investigating probable differences in Al (-speciation) after Al-containing subcutaneous immunotherapy (SIT). Sample donors were recruited either for the control group ("class-0", they never had been treated with SIT containing an Al-depot extract) or for the SIT-group ("class-1", they previously had been treated with SIT for insect venom allergy with an Al-depot extract). Blood was drawn for medical reasons and serum prepared. Additionally, some sample donors collected 24-h-urine. They had been informed (and they consented) about the scientific use of their samples. The study was approved by the ethic committee of the "Medical Association Westphalia-Lippe" and of the University of Münster, evaluating the study positively (No. 2013-667-f-S). We applied quality controlled sample preparation and interference-free Al detection by ICP sectorfield-mass spectrometry. Al-species were analysed using size-exclusion-chromatography-ICP-qMS. Al-concentrations or speciation in urine samples showed no differences between class-0 and class-1. Al-citrate was the main uric Al-species. In serum elevated Al-concentrations were found for both classes, with class-1 samples being significantly higher than class-0 (p = 0.041), but class-0 samples being approximately 10-fold too high compared to reference values from non-exposed persons. We identified gel-monovettes as contamination source. In contamination-free samples from HNO 3 -prewashed gel

  18. Synthesis of core-shell AlOOH hollow nanospheres by reacting Al nanoparticles with water

    NASA Astrophysics Data System (ADS)

    Lozhkomoev, A. S.; Glazkova, E. A.; Bakina, O. V.; Lerner, M. I.; Gotman, I.; Gutmanas, E. Y.; Kazantsev, S. O.; Psakhie, S. G.

    2016-05-01

    A novel route for the synthesis of boehmite nanospheres with a hollow core and the shell composed of highly crumpled AlOOH nanosheets by oxidizing Al nanopowder in pure water under mild processing conditions is described. The stepwise events of Al transformation into boehmite are followed by monitoring the pH in the reaction medium. A mechanism of formation of hollow AlOOH nanospheres with a well-defined shape and crystallinity is proposed which includes the hydration of the Al oxide passivation layer, local corrosion of metallic Al accompanied by hydrogen evolution, the rupture of the protective layer, the dissolution of Al from the particle interior and the deposition of AlOOH nanosheets on the outer surface. In contrast to previously reported methods of boehmite nanoparticle synthesis, the proposed method is simple, and environmentally friendly and allows the generation of hydrogen gas as a by-product. Due to their high surface area and high, slit-shaped nanoporosity, the synthesized AlOOH nanostructures hold promise for the development of more effective catalysts, adsorbents, vaccines and drug carriers.

  19. Millimeter distance effects of surface plasmon polaritons in electroformed Al-Al2O3-Ag diodes

    NASA Astrophysics Data System (ADS)

    Hickmott, T. W.

    2017-02-01

    Electroforming of metal-insulator-metal diodes is a soft dielectric breakdown that changes the high resistance of as-prepared diodes to a low resistance state. Electroforming of Al-Al2O3-metal diodes with anodic Al2O3 results in voltage-controlled negative resistance in the current-voltage (I-V) characteristics, electroluminescence (EL), and electron emission into vacuum (EM). EL is due to electrons injected at the Al-Al2O3 interface combining with radiative defects in Al2O3. Surface plasmon polaritons (SPPs) are electromagnetic waves that can be excited by photons or electrons. SPPs are confined to a metal-dielectric interface, cause large electric fields in the metal and dielectric, and have ranges of micrometers. The temperature dependence of I-V curves, EL, and EM of a group of electroformed Al-Al2O3-Ag diodes with Al2O3 thicknesses between 12 nm and 20 nm, group A, was measured between 200 K and 300 K. After a sequence of temperature measurements, the Al-Al2O3-Ag diodes, the Al-Al2O3 regions between diodes, and portions of the Ag on the glass region that provides contacts to the diodes are darkened. The range of darkening is >7 mm in a diode with 12 nm of Al2O3 and 2.0-3.5 mm in diodes with Al2O3 thicknesses between 14 nm and 20 nm. Darkening is attributed to the occurrence of SPPs generated by EL photons at the Ag-Al2O3 and Al-Al2O3 interfaces. The results are compared to a second group of Al-Al2O3-Ag diodes with identical Al2O3 thicknesses, group B, that were prepared in the same way as the diodes of group A except for a difference in the deposition of Al films for the two groups. Al-Al2O3-Ag diodes of group B exhibit enhanced EL, which is attributed to spontaneous emission of recombination centers in Al2O3 being enhanced by large electromagnetic fields that are due to SPPs that are generated by EL photons.

  20. Electronic transport through Al/InN nanowire/Al junctions

    DOE PAGES

    Lu, Tzu -Ming; Wang, George T.; Pan, Wei; ...

    2016-02-10

    We report non-linear electronic transport measurement of Al/Si-doped n-type InN nanowire/Al junctions performed at T = 0.3 K, below the superconducting transition temperature of the Al electrodes. The proximity effect is observed in these devices through a strong dip in resistance at zero bias. In addition to the resistance dip at zero bias, several resistance peaks can be identified at bias voltages above the superconducting gap of the electrodes, while no resistance dip is observed at the superconducting gap. The resistance peaks disappear as the Al electrodes turn normal beyond the critical magnetic field except one which remains visible atmore » fields several times higher than critical magnetic field. An unexpected non-monotonic magnetic field dependence of the peak position is observed. As a result, we discuss the physical origin of these observations and propose that the resistance peaks could be the McMillan-Rowell oscillations arising from different closed paths localized near different regions of the junctions.« less

  1. Rechargeable Al/Cl2 battery with molten AlCl4/-/ electrolyte.

    NASA Technical Reports Server (NTRS)

    Holleck, G. L.; Giner, J.; Burrows, B.

    1972-01-01

    A molten salt system based on Al- and Cl2 carbon electrodes, with an AlCl3 alkali chloride eutectic as electrolyte, offers promise as a rechargeable, high energy density battery which can operate at a relatively low temperature. Electrode kinetic studies showed that the electrode reactions at the Al anode were rapid and that the observed passivation phenomena were due to the formation at the electrode surface of a solid salt layer resulting from concentration changes on anodic or cathodic current flow. It was established that carbon electrodes were intrinsically active for chlorine reduction in AlCl3-alkali chloride melts. By means of a rotating vitreous carbon disk electrode, the kinetic parameters were determined.

  2. Two-Phase Eutectic Growth in Al-Cu and Al-Cu-Ag

    NASA Astrophysics Data System (ADS)

    Senninger, Oriane; Peters, Matthew; Voorhees, Peter W.

    2018-02-01

    The microstructure developed by two-phase lamellar eutectics (α ) -(θ {-Al}2{Cu}) in Al-Cu and Al-Cu-Ag alloys is analyzed. A model of two-phase eutectic growth in multicomponent alloys is used to determine the scaling law of the eutectic microstructure using the alloy thermophysical properties. The application of the model to these alloys shows that the addition of Ag to Al-Cu alloys does not significantly change the length scale of the microstructure, which is in agreement with previous experimental studies. This is explained by the combined phenomena of the decrease in interface energies with the addition of Ag and the superheating of the (α ) phase interface induced by the Ag composition profile.

  3. Hot Corrosion Behavior of Stainless Steel with Al-Si/Al-Si-Cr Coating

    NASA Astrophysics Data System (ADS)

    Fu, Guangyan; Wu, Yongzhao; Liu, Qun; Li, Rongguang; Su, Yong

    2017-03-01

    The 1Cr18Ni9Ti stainless steel with Al-Si/Al-Si-Cr coatings is prepared by slurry process and vacuum diffusion, and the hot corrosion behavior of the stainless steel with/without the coatings is studied under the condition of Na2SO4 film at 950 °C in air. Results show that the corrosion kinetics of stainless steel, the stainless steel with Al-Si coating and the stainless steel with Al-Si-Cr coating follow parabolic laws in several segments. After 24 h corrosion, the sequence of the mass gain for the three alloys is the stainless steel with Al-Si-Cr coating < the stainless steel with Al-Si coating < the stainless steel without any coating. The corrosion products of the three alloys are layered. Thereinto, the corrosion products of stainless steel without coating are divided into two layers, where the outside layer contains a composite of Fe2O3 and FeO, and the inner layer is Cr2O3. The corrosion products of the stainless steel with Al-Si coating are also divided into two layers, of which the outside layer mainly consists of Cr2O3, and the inner layer is mainly SiO2. The corrosion film of the stainless steel with Al-Si-Cr coating is thin and dense, which combines well with substrate. Thereinto, the outside layer is mainly Cr2O3, and the inside layer is Al2O3. In the matrix of all of the three alloys, there exist small amount of sulfides. Continuous and protective films of Cr2O3, SiO2 and Al2O3 form on the surface of the stainless steel with Al-Si and Al-Si-Cr coatings, which prevent further oxidation or sulfide corrosion of matrix metals, and this is the main reason for the much smaller mass gain of the two alloys than that of the stainless steel without any coatings in the 24 h hot corrosion process.

  4. Microstructural and Phase Composition Differences Across the Interfaces in Al/Ti/Al Explosively Welded Clads

    NASA Astrophysics Data System (ADS)

    Fronczek, Dagmara Malgorzata; Chulist, Robert; Litynska-Dobrzynska, Lidia; Lopez, Gabriel Alejandro; Wierzbicka-Miernik, Anna; Schell, Norbert; Szulc, Zygmunt; Wojewoda-Budka, Joanna

    2017-09-01

    The microstructure and phase composition of Al/Ti/Al interfaces with respect to their localization were investigated. An aluminum-flyer plate exhibited finer grains located close to the upper interface than those present within the aluminum-base plate. The same tendency, but with a higher number of twins, was observed for titanium. Good quality bonding with a wavy shape and four intermetallic phases, namely, TiAl3, TiAl, TiAl2, and Ti3Al, was only obtained at the interface closer to the explosive material. The other interface was planar with three intermetallic compounds, excluding the metastable TiAl2 phase. As a result of a 100-hour annealing at 903 K (630 °C), an Al/TiAl3/Ti/TiAl3/Al sandwich was manufactured, formed with single crystalline Al layers. A substantial difference between the intermetallic layer thicknesses was measured, with 235.3 and 167.4 µm obtained for the layers corresponding to the upper and lower interfaces, respectively. An examination by transmission electron microscopy of a thin foil taken from the interface area after a 1-hour annealing at 825 K (552 °C) showed a mixture of randomly located TiAl3 grains within the aluminum. Finally, the hardness results were correlated with the microstructural changes across the samples.

  5. [Knowledge and practices regarding cystic echinococcosis and trichinellosis in users and companions of users of the Hospital Comunitario de Salud Familiar El Carmen, Biobio Region, Chile].

    PubMed

    Lisboa-Navarro, Raúl; González, Jorge; Junod, Tania; Melín-Coloma, Millaray; Landaeta-Aqueveque, Carlos

    2016-08-01

    We surveyed users of the Hospital Comunitario de Salud Familiar El Carmen and their companions to analyze knowledge and practices regarding cystic echinococcosis and trichinellosis. Most people recognized risky practices. Previous attendance at talks and working in agricultural-livestock enhanced the knowledge. Age, sex and formal education were not associated with the knowledge. Knowledge was not associated with practices.

  6. Response of rice to Al stress and identification of quantitative trait Loci for Al tolerance.

    PubMed

    Ma, Jian Feng; Shen, Renfang; Zhao, Zhuqing; Wissuwa, Matthias; Takeuchi, Yoshinobu; Ebitani, Takeshi; Yano, Masahiro

    2002-06-01

    Rice (Oryza sativa L.) shows the highest tolerance to Al toxicity among small-grain cereal crops, however, the mechanisms and genetics responsible for its high Al tolerance are not yet well understood. We investigated the response of rice to Al stress using the japonica variety Koshihikari in comparison to the indica variety Kasalath. Koshihikari showed higher tolerance at various Al concentrations than Kasalath. The Al content in root apexes was less in Koshihikari than in Kasalath, suggesting that exclusion mechanisms rather than internal detoxification are acting in Koshihikari. Al-induced secretion of citrate was observed in both Koshihikari and Kasalath, however, it is unlikely to be the mechanism for Al tolerance because there was no significant difference in the amount of citrate secreted between Koshihikari and Kasalath. Quantitative trait loci (QTLs) for Al tolerance were mapped in a population of 183 backcross inbred lines (BILs) derived from a cross of Koshihikari and Kasalath. Three putative QTLs controlling Al tolerance were detected on chromosomes 1, 2 and 6. Kasalath QTL alleles on chromosome 1 and 2 reduced Al tolerance but increased tolerance on chromosome 6. The three QTLs explained about 27% of the phenotypic variation in Al tolerance. The existence of QTLs for Al tolerance was confirmed in substitution lines for corresponding chromosomal segments.

  7. An epidemiological study of cutaneous leishmaniasis in Al-jabal Al-gharbi, Libya.

    PubMed

    Abdellatif, Manal Z M; El-Mabrouk, Khamis; Ewis, Ashraf A

    2013-02-01

    Cutaneous leishmaniasis (CL) is an endemic parasitic infection in the Mediterranean region, including Libya and its Al-jabal Al-gharbi province. We aimed at studying the occupational relevance as well as other epidemiological aspects of CL. We investigated 140 CL cases who attended at Gharyan outpatient polyclinic during a period of 6 months in 2009. CL infection was clinically diagnosed and confirmed by demonstration of Leishmania parasites on smears from lesions. Our findings showed that males were more affected than females (P=0.04), and people above 10-years were more affected than younger ones (P=0.0001). A significant percent of CL cases belonged to Al-Kawasem subprovince (P=0.0001). Farm-related activities were the most frequent occupations among CL cases (P=0.04). In addition to farm workers, housewives and students are at risk groups since they are engaged at farm activities. Moreover, those who have occupations that require staying outdoors for a part of night, e.g., policemen, are also at risk. Compared to children, adult CL patients had multiple lesions (P=0.001) that were more prevalent in their upper and lower extremities than the face (P=0.0001). We conclude that CL is a major health problem in Al-jabal Al-gharbi province of Libya. The presence of rodents and sandflies makes it a suitable environment for Leishmania to spread in an endemic epidemiological pattern. Being engaged in farming activities or outdoor occupations increases the risk of infection. Various clinical patterns of CL suggest the presence of more than 1 species of Leishmania at Al-jabal Al-gharbi province. We propose that the 2 species responsible for CL in this area are L. major and L. tropica. Further investigations to identify the leishmanial species responsible for CL at Al-jabal Al-gharbi together with adoption of preventive and control programs are needed.

  8. An Epidemiological Study of Cutaneous Leishmaniasis in Al-Jabal Al-Gharbi, Libya

    PubMed Central

    Abdellatif, Manal Z. M.; El-Mabrouk, Khamis

    2013-01-01

    Cutaneous leishmaniasis (CL) is an endemic parasitic infection in the Mediterranean region, including Libya and its Al-jabal Al-gharbi province. We aimed at studying the occupational relevance as well as other epidemiological aspects of CL. We investigated 140 CL cases who attended at Gharyan outpatient polyclinic during a period of 6 months in 2009. CL infection was clinically diagnosed and confirmed by demonstration of Leishmania parasites on smears from lesions. Our findings showed that males were more affected than females (P=0.04), and people above 10-years were more affected than younger ones (P=0.0001). A significant percent of CL cases belonged to Al-Kawasem subprovince (P=0.0001). Farm-related activities were the most frequent occupations among CL cases (P=0.04). In addition to farm workers, housewives and students are at risk groups since they are engaged at farm activities. Moreover, those who have occupations that require staying outdoors for a part of night, e.g., policemen, are also at risk. Compared to children, adult CL patients had multiple lesions (P=0.001) that were more prevalent in their upper and lower extremities than the face (P=0.0001). We conclude that CL is a major health problem in Al-jabal Al-gharbi province of Libya. The presence of rodents and sandflies makes it a suitable environment for Leishmania to spread in an endemic epidemiological pattern. Being engaged in farming activities or outdoor occupations increases the risk of infection. Various clinical patterns of CL suggest the presence of more than 1 species of Leishmania at Al-jabal Al-gharbi province. We propose that the 2 species responsible for CL in this area are L. major and L. tropica. Further investigations to identify the leishmanial species responsible for CL at Al-jabal Al-gharbi together with adoption of preventive and control programs are needed. PMID:23467624

  9. Formation of epitaxial Al 2O 3/NiAl(1 1 0) films: aluminium deposition

    NASA Astrophysics Data System (ADS)

    Lykhach, Y.; Moroz, V.; Yoshitake, M.

    2005-02-01

    Structure of epitaxial Al 2O 3 layers formed on NiAl(1 1 0) substrates has been studied by means of reflection high-energy electron diffraction (RHEED). The elucidated structure was compared to the model suggested for 0.5 nm-thick Al 2O 3 layers [K. Müller, H. Lindner, D.M. Zehner, G. Ownby, Verh. Dtsch. Phys. Ges. 25 (1990) 1130; R.M. Jaeger, H. Kuhlenbeck, H.J. Freund, Surf. Sci. 259 (1991) 235]. The stepwise growth of Al 2O 3 film, involving deposition and subsequent oxidation of aluminium onto epitaxial 0.5 nm-thick Al 2O 3 layers, has been investigated. Aluminium was deposited at room temperature, whereas its oxidation took place during annealing at 1070 K. The Al 2O 3 thickness was monitored by means of Auger electron spectroscopy (AES). It was found that Al 2O 3 layer follows the structure of 0.5 nm thick Al 2O 3 film, although a tilting of Al 2O 3(1 1 1) surface plane with respect to NiAl(1 1 0) surface appeared after Al deposition.

  10. Amyotrophic lateral sclerosis (ALS)

    MedlinePlus

    Lou Gehrig disease; ALS; Upper and lower motor neuron disease; Motor neuron disease ... One out of 10 cases of ALS is due to a genetic defect. The cause is unknown in most other cases. In ALS, motor nerve cells (neurons) waste away ...

  11. All About ALS

    MedlinePlus

    ... by storm with videos of people pouring ice water on themselves for the Ice Bucket Challenge. The worldwide phenomenon raised awareness—and millions of research dollars—for a fatal disease called ALS. ALS ...

  12. Oxidation behavior of Al/Cr coating on Ti2AlNb alloy at 900 °C

    NASA Astrophysics Data System (ADS)

    Yang, Zhengang; Liang, Wenping; Miao, Qiang; Chen, Bowen; Ding, Zheng; Roy, Nipon

    2018-04-01

    In this paper, the Al/Cr coating was fabricated on the surface of Ti2AlNb alloy via rf magnetron sputtering and double glow treatment to enhance oxidation resistance. The protective coating with an outer layer of Al and inner layer of Cr has great bonding strength due to the in-diffusion of Cr and the inter-diffusion between Al and Cr to form Al-Cr alloyed layer which has great hardness. Acoustic emission curve which was detected via WS-2005 scratch tester indicates the bonding strength between Al/Cr coating and substrate is great. Morphology of Ti2AlNb alloy with Al/Cr coating after scratch test shows that the scratch is smooth without disbanding, and the depth and breadth of scratch are changed uniformly. The mass change was reduced after oxidation test due to the Al/Cr protective coating. Isothermal oxidation test at 900 °C was researched. Results indicate that Al/Cr coating provided oxidation resistance of Ti2AlNb alloy with prolonged air exposure at 900 °C. Al2O3 was detected by XRD patterns and SEM images, and was formed on the surface of Ti2AlNb alloy to protect substrate during oxidation test. A certain content of Cr is beneficial for the formation of Al2O3. Besides, Cr2O3 was produced under Al2O3 by outward diffusion of Cr to protect substrate sequentially, no cracks were discovered on Al/Cr protective coating. The process of Ti outward diffusion into surface was suppressive due to integration of Cr-Ti and Al-Ti intermetallics. A steady, adherent and continuous coated layer of Al/Cr on Ti2AlNb alloy increases oxidation resistance.

  13. Estándar para la Protección del Trabajador Agrícola Revisado

    EPA Pesticide Factsheets

    Estas revisiones al Estándar de Protección a los Trabajadores Agrícolas, promulgado en 1992, proporcionarán protecciones de salud a los trabajadores agrícolas similares a las que ya disponen trabajadores en otras industrias.

  14. Elastocaloric effect in CuAlZn and CuAlMn shape memory alloys under compression

    PubMed Central

    Qian, Suxin; Wang, Yi; Pillsbury, Thomas E.; Hada, Yoshiharu; Yamaguchi, Yuki; Fujimoto, Kenjiro; Hwang, Yunho; Radermacher, Reinhard; Cui, Jun; Yuki, Yoji; Toyotake, Koutaro; Takeuchi, Ichiro

    2016-01-01

    This paper reports the elastocaloric effect of two Cu-based shape memory alloys: Cu68Al16Zn16 (CuAlZn) and Cu73Al15Mn12 (CuAlMn), under compression at ambient temperature. The compression tests were conducted at two different rates to approach isothermal and adiabatic conditions. Upon unloading at a strain rate of 0.1 s−1 (adiabatic condition) from 4% strain, the highest adiabatic temperature changes (ΔTad) of 4.0 K for CuAlZn and 3.9 K for CuAlMn were obtained. The maximum stress and hysteresis at each strain were compared. The stress at the maximum recoverable strain of 4.0% for CuAlMn was 120 MPa, which is 70% smaller than that of CuAlZn. A smaller hysteresis for the CuAlMn alloy was also obtained, about 70% less compared with the CuAlZn alloy. The latent heat, determined by differential scanning calorimetry, was 4.3 J g−1 for the CuAlZn alloy and 5.0 J g−1 for the CuAlMn alloy. Potential coefficients of performance (COPmat) for these two alloys were calculated based on their physical properties of measured latent heat and hysteresis, and a COPmat of approximately 13.3 for CuAlMn was obtained. This article is part of the themed issue ‘Taking the temperature of phase transitions in cool materials’. PMID:27402936

  15. Structural and compositional evolution of Al{sub 3}(Zr,Y) precipitates in Al-Zr-Y alloy

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Gao, Haiyan, E-mail: gaohaiyan@sjtu.edu.cn

    Structural and compositional evolution of Al{sub 3}(Zr,Y) precipitates in aged Al-Zr-Y alloy was investigated through atom probe tomography (APT) and transmission electron microscope (TEM) analysis and first principles calculations. The results show that short-bar-shaped D0{sub 19}-Al{sub 3}Y with some Zr atoms dissolved in precipitated at the very beginning of decomposition and worked as heterogeneous nuclei for L1{sub 2}-Al{sub 3}Zr with spherical morphology after being aged at 400 °C for 2 h. Quasi-static coarsening happened as the aging treatment lasted from 2 h to 200 h. However, distribution of Zr and Y atoms in Al{sub 3}(Zr,Y) is nearly uniform and Al{submore » 3}(Zr,Y) do not have the typical “Al{sub 3}RE core-Al{sub 3}Zr shell” structure which observed in other RE containing Al-Zr-RE alloys with L1{sub 2}-Al{sub 3}RE as nuclei. First principles calculations revealed that binding energy between Y and Zr is strong during the growth of Al{sub 3}(Zr,Y), which led to the co-precipitation of Y and Zr atoms and attribute to the evolution of Al{sub 3}(Zr,Y). - Highlights: •Al{sub 3}Y precipitated firstly and then became nuclei for Al{sub 3}Zr during aging of Al-Zr-Y. •Al{sub 3}(Zr,Y) precipitates do not have the typical “Al{sub 3}Y core-Al{sub 3}Zr shell” structure. •Strong binding between Y and Zr led to the co-precipitation of Y and Zr atoms.« less

  16. Revisiting Deng et al.'s Multiparty Quantum Secret Sharing Protocol

    NASA Astrophysics Data System (ADS)

    Hwang, Tzonelih; Hwang, Cheng-Chieh; Yang, Chun-Wei; Li, Chuan-Ming

    2011-09-01

    The multiparty quantum secret sharing protocol [Deng et al. in Chin. Phys. Lett. 23: 1084-1087, 2006] is revisited in this study. It is found that the performance of Deng et al.'s protocol can be much improved by using the techniques of block-transmission and decoy single photons. As a result, the qubit efficiency is improved 2.4 times and only one classical communication, a public discussion, and two quantum communications between each agent and the secret holder are needed rather than n classical communications, n public discussions, and 3n/2 quantum communications required in the original scheme.

  17. Fabrication of Al/Mg/Al Composites via Accumulative Roll Bonding and Their Mechanical Properties

    PubMed Central

    Nie, Jinfeng; Liu, Mingxing; Wang, Fang; Zhao, Yonghao; Li, Yusheng; Cao, Yang; Zhu, Yuntian

    2016-01-01

    Al(1060)/Mg(AZ31)/Al(1060) multilayered composite was successfully produced using an accumulative roll bonding (ARB) process for up to four cycles at an elevated temperature (400 °C). The microstructure evolution of the composites and the bonding characteristics at the interfaces between Al and Mg layers with increasing ARB cycles were characterized through optical microscopy, field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM). It was found that the grains of Al and Mg layers were significantly refined and Al3Mg2 and Al12 Mg17 intermetallic compound layers formed at the Al/Mg bonding interfaces. The strength increased gradually and the ultimate tensile strength (UTS) reached a maximum value of about 240 MPa at the third pass. Furthermore, the strengthening mechanism of the composite was analyzed based on the fracture morphologies. PMID:28774072

  18. Suppression of gate leakage current in in-situ grown AlN/InAlN/AlN/GaN heterostructures based on the control of internal polarization fields

    NASA Astrophysics Data System (ADS)

    Kotani, Junji; Yamada, Atsushi; Ishiguro, Tetsuro; Yamaguchi, Hideshi; Nakamura, Norikazu

    2017-03-01

    This paper investigates the gate leakage characteristics of in-situ AlN capped InAlN/AlN/GaN heterostructures grown by metal-organic vapor phase epitaxy. It was revealed that the leakage characteristics of AlN capped InAlN/AlN/GaN heterostructures are strongly dependent on the growth temperature of the AlN cap. For an AlN capped structure with an AlN growth temperature of 740 °C, the leakage current even increased although there exists a large bandgap material on InAlN/AlN/GaN heterostructures. On the other hand, a large reduction of the gate leakage current by 4-5 orders of magnitudes was achieved with a very low AlN growth temperature of 430 °C. X-ray diffraction analysis of the AlN cap grown at 740 °C indicated that the AlN layer is tensile-strained. In contrast to this result, the amorphous structure was confirmed for the AlN cap grown at 430 °C by transmission electron microscopy. Furthermore, theoretical analysis based on one-dimensional band simulation was carried out, and the large increase in two-dimensional electron gas (2DEG) observed in Hall measurements was well reproduced by taking into account the spontaneous and piezo-electric polarization in the AlN layer grown at 740 °C. For the AlN capped structure grown at 430 °C, it is believed that the reduced polarization field in the AlN cap suppressed the penetration of 2DEG into the InAlN barrier layer, resulting in a small impact on 2DEG mobility and density. We believe that an in-situ grown AlN cap with a very low growth temperature of 430 °C is a promising candidate for high-frequency/high-power GaN-based devices with low gate leakage current.

  19. Cambios al Estándar de Protección a los Trabajadores Agrícolas de la EPA

    EPA Pesticide Factsheets

    Estos cambios proporcionarán protecciones de salud a los trabajadores agrícolas similares a las que ya disponen trabajadores en otras industrias, teniendo en cuenta el entorno laboral único de muchos trabajos agrícolas.

  20. Depolarization currents in Al 2O 3 and MgAl 2O 4 oxides

    NASA Astrophysics Data System (ADS)

    Carvalhaes, R. P. M.; Rocha, M. S.; de Souza, S. S.; Blak, A. R.

    2004-06-01

    In the present work, dipole defects in γ-irradiated and thermally treated samples of Al 2O 3 and MgAl 2O 4 oxides are investigated, applying the thermally stimulated depolarisation currents technique (TSDC). The TSDC spectra of MgAl 2O 4 doped with Fe 2+, Fe 3+, Co 2+, Cr 3+ and Mn 2+ show four bands at 130 K, 160 K, 250 K and 320 K, and the spectra of Al 2O 3 doped with Mg 2+, Cr 3+ and Fe 3+ show bands between 230 K and 260 K. It has been observed that the bands at 130 K, 160 K and 250 K in MgAl 2O 4 spinel and that the 230 K and 240 K bands in Al 2O 3 are related to dipole defects. The other bands are possibly related to different types of charge storage mechanisms (space-charge and interfacial polarisation) or deal with distributions in activation energies and/or in relaxation times. A thermal decrease of the TSDC bands for heat treatments above 1000 K has been observed. In MgAl 2O 4 spinel, the 250 K band could be recovered after γ-irradiation and the two dipole peaks in Al 2O 3 were partially recovered. Thermal treatments affect the dipole aggregation processes in both oxides. Optical absorption (AO) results indicate that the presence of bands of water molecules in the infrared region obstructs the appearance of the TSDC bands in both Al 2O 3 and MgAl 2O 4. The 250 K peak in MgAl 2O 4 was correlated to V-type centres and the 250 K peak in Al 2O 3 to a substitutional Mg 2+ ion near a trapped hole localised on an adjacent oxygen ion.

  1. The growth of high-Al-content InAlGaN quaternary alloys by RF-MBE

    NASA Astrophysics Data System (ADS)

    Wang, B. Z.; Wang, X. L.; Wang, X. Y.; Guo, L. C.; Wang, X. H.; Xiao, H. L.; Liu, H. X.

    2007-02-01

    High-Al-content InxAlyGa1-x-yN (x = 1-10%, y = 34-45%) quaternary alloys were grown on sapphire by radio-frequency plasma-excited molecular beam epitaxy. Rutherford back-scattering spectrometry, high resolution x-ray diffraction and cathodoluminescence were used to characterize the InAlGaN alloys. The experimental results show that InAlGaN with an appropriate Al/In ratio (near 4.7, which is a lattice-match to the GaN under-layer) has better crystal and optical quality than the InAlGaN alloys whose Al/In ratios are far from 4.7. Some cracks and V-defects occur in high-Al/In-ratio InAlGaN alloys. In the CL image, the cracks and V-defect regions are the emission-enhanced regions.

  2. Preparation, deformation, and failure of functional Al-Sn and Al-Sn-Pb nanocrystalline alloys

    NASA Astrophysics Data System (ADS)

    Noskova, N. I.; Vil'Danova, N. F.; Filippov, Yu. I.; Churbaev, R. V.; Pereturina, I. A.; Korshunov, L. G.; Korznikov, A. V.

    2006-12-01

    Changes in the structure, hardness, mechanical properties, and friction coefficient of Al-30% Sn, Al-15% Sn-25% Pb, and Al-5% Sn-35% Pb (wt %) alloys subjected to severe plastic deformation by equal-channel angular pressing (with a force of 40 tonne) and by shear at a pressure of 5 GPa have been studied. The transition into the nanocrystalline state was shown to occur at different degrees of plastic deformation. The hardness exhibits nonmonotonic variations, namely, first it increases and subsequently decreases. The friction coefficient of the Al-30% Sn, Al-15% Sn-25% Pb, and Al-5% Sn-35% Pb alloys quenched from the melt was found to be 0.33; the friction coefficients of these alloys in the submicrocrystalline state (after equal-channel angular pressing) equal 0.24, 0.32, and 0.35, respectively. The effect of disintegration into nano-sized powders was found to occur in the Al-15% Sn-25% Pb, and Al-5% Sn-35% Pb alloys after severe plastic deformation to ɛ = 6.4 and subsequent short-time holding.

  3. Temperature dependence of the dielectric response of anodized Al-Al2O3-metal capacitors

    NASA Astrophysics Data System (ADS)

    Hickmott, T. W.

    2003-03-01

    The temperature dependence of capacitance, CM, and conductance, GM, of Al-Al2O3-metal capacitors with Cu, Ag, and Au electrodes has been measured between 100 and 340 K at seven frequencies between 10 kHz and 1 MHz. Al2O3 films between 15 and 64 nm thick were formed by anodizing evaporated Al films in borate-glycol or borate-H2O electrolyte. The interface capacitance at the Al2O3-metal interface, CI, which is in series with the capacitance CD due to the Al2O3 dielectric, is determined from plots of 1/CM versus insulator thickness. CI is not fixed for a given metal-insulator interface but depends on the vacuum system used to deposit the metal electrode. CI is nearly temperature independent. When CI is taken into account the dielectric constant of Al2O3 determined from capacitance measurements is ˜8.3 at 295 K. The dielectric constant does not depend on anodizing electrolyte, insulator thickness, metal electrode, deposition conditions for the metal electrode or measurement frequency. By contrast, GM of Al-Al2O3-metal capacitors depends on both the deposition conditions of the metal and on the metal. For Al-Al2O3-Cu capacitors, GM is larger for capacitors with large values of 1/CI that result when Cu is evaporated in an oil-pumped vacuum system. For Al-Al2O3-Ag capacitors, GM does not depend on the Ag deposition conditions.

  4. From Snow to Hill to ALS: An epidemiological odyssey in search of ALS causation.

    PubMed

    Armon, Carmel

    2018-05-21

    Establishing mechanisms of disease causation in neurodegenerative diseases has long seemed to be beyond the pale of traditional epidemiological tools. Establishing a plausible mechanism for initiation of amyotrophic lateral sclerosis (ALS) has appeared a particularly elusive goal. This review shows that a likely mechanism for ALS initiation may be inferred by applying classical methods of epidemiological inference. Advances in characterizing the biology of ALS suggest that most cases of ALS are cortically-generated, part of the ALS-FTD spectrum, with focal onset and spread by contiguity within the motor super-network. Evidence-based methods identified the most credible exogenous risk factor - smoking. AB Hill's nine viewpoints to inferring causation from association were invoked. The most likely mechanism consistent with smoking being a risk factor for ALS was inferred: cumulative DNA damage, akin to cumulative somatic mutations in carcinogenesis. Focal onset supports the concept that these changes, occurring in a single cell, may trigger the cascade leading to clinical ALS. The plausibility of this mechanism was affirmed by its coherence/consistency with other observations in sporadic, familial and western Pacific ALS. Application of traditional epidemiological reasoning suggests that cumulative DNA damage may contribute to disease onset in ALS. Copyright © 2018 Elsevier B.V. All rights reserved.

  5. Polarization and Fowler-Nordheim tunneling in anodized Al-Al2O3-Au diodes

    NASA Astrophysics Data System (ADS)

    Hickmott, T. W.

    2000-06-01

    Polarization in anodic Al2O3 films is measured by using quasi-dc current-voltage (I-V) curves of Al-Al2O3-Au diodes. A reproducible polarization state is established by applying a negative voltage to the Au electrode of a rectifying Al-Al2O3-Au diode. The difference between subsequent I-V curves with Au positive is a measure of polarization in the sample. The magnitude of polarization charge in Al2O3 depends on the anodizing electrolyte. Al2O3 films formed in H2O-based electrolytes have approximately ten times the polarization charge of Al2O3 films formed in ethylene glycol-based electrolyte. Anodizing conditions that produce greater polarizing charge in anodic Al2O3 result in voltage-time curves during anodization under galvanostatic conditions that are nonlinear. Anodic films with greater polarizing charge also have a greater apparent interface capacitance which is independent of Al2O3 thickness. I-V curves of Al-Al2O3-Au diodes for increasing voltage are dominated by polarization. I-V curves for decreasing voltage are reproducible and parallel but depend on the maximum current and voltage reached during the measurement. There is no single current corresponding to a given voltage. I-V curves for decreasing voltage are analyzed assuming that the conduction mechanism is Fowler-Nordheim (FN) tunneling. There is a qualitative difference between the FN tunneling parameters for Al2O3 films formed in H2O-based electrolytes and those formed in ethylene glycol-based electrolyte. For the former the value of the exponential term in the FN analysis increases as the value of maximum voltage and current in an I-V characteristic increases, while the value of the pre-exponential term is nearly constant. For the latter, the exponential term is nearly constant as maximum voltage and current increase, but the pre-exponential term decreases by about 5 decades. Thus polarization charge incorporated during formation of anodized Al2O3 strongly affects the formation of the insulating

  6. CuAlO2 and CuAl2O4 thin films obtained by stacking Cu and Al films using physical vapor deposition

    NASA Astrophysics Data System (ADS)

    Castillo-Hernández, G.; Mayén-Hernández, S.; Castaño-Tostado, E.; DeMoure-Flores, F.; Campos-González, E.; Martínez-Alonso, C.; Santos-Cruz, J.

    2018-06-01

    CuAlO2 and CuAl2O4 thin films were synthesized by the deposition of the precursor metals using the physical vapor deposition technique and subsequent annealing. Annealing was carried out for 4-6 h in open and nitrogen atmospheres respectively at temperatures of 900-1000 °C with control of heating and cooling ramps. The band gap measurements ranged from 3.3 to 4.5 eV. Electrical properties were measured using the van der Pauw technique. The preferred orientations of CuAlO2 and CuAl2O4 were found to be along the (1 1 2) and (3 1 1) planes, respectively. The phase percentages were quantified using a Rietveld refinement simulation and the energy dispersive X-ray spectroscopy indicated that the composition is very close to the stoichiometry of CuAlO2 samples and with excess of aluminum and deficiency of copper for CuAl2O4 respectively. High resolution transmission electron microscopy identified the principal planes in CuAlO2 and in CuAl2O4. Higher purities were achieved in nitrogen atmosphere with the control of the cooling ramps.

  7. Three-Dimensional FIB/EBSD Characterization of Irradiated HfAl3-Al Composite

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hua, Zilong; Guillen, Donna Post; Harris, William

    2016-09-01

    A thermal neutron absorbing material, comprised of 28.4 vol% HfAl3 in an Al matrix, was developed to serve as a conductively cooled thermal neutron filter to enable fast flux materials and fuels testing in a pressurized water reactor. In order to observe the microstructural change of the HfAl3-Al composite due to neutron irradiation, an EBSD-FIB characterization approach is developed and presented in this paper. Using the focused ion beam (FIB), the sample was fabricated to 25µm × 25µm × 20 µm and mounted on the grid. A series of operations were carried out repetitively on the sample top surface tomore » prepare it for scanning electron microscopy (SEM). First, a ~100-nm layer was removed by high voltage FIB milling. Then, several cleaning passes were performed on the newly exposed surface using low voltage FIB milling to improve the SEM image quality. Last, the surface was scanned by Electron Backscattering Diffraction (EBSD) to obtain the two-dimensional image. After 50 to 100 two-dimensional images were collected, the images were stacked to reconstruct a three-dimensional model using DREAM.3D software. Two such reconstructed three-dimensional models were obtained from samples of the original and post-irradiation HfAl3-Al composite respectively, from which the most significant microstructural change caused by neutron irradiation apparently is the size reduction of both HfAl3 and Al grains. The possible reason is the thermal expansion and related thermal strain from the thermal neutron absorption. This technique can be applied to three-dimensional microstructure characterization of irradiated materials.« less

  8. The Genyornis Egg: Response to Miller et al.'s commentary on Grellet-Tinner et al., 2016

    NASA Astrophysics Data System (ADS)

    Grellet-Tinner, Gerald; Spooner, Nigel A.; Handley, Warren D.; Worthy, Trevor H.

    2017-04-01

    Williams (1981) and Williams and Rich (1991) attributed Australian Quaternary fossil eggshell that differed from that of emu Dromaius novaehollandiae to the extinct bird Genyornis newtoni without any osteological or embryonic support. Such association by proximity or abundance mirrors the case of the mistaken association of oviraptor eggs to Protoceratops in the 1920's by Andrews (Grellet-Tinner and Makovicky, 2006). No other candidate species was considered, and this attribution has been unchallenged and followed by everyone thereafter. Much research has been done on this Australian eggshell, with one result being that the extinction of the parent of this eggshell is the most well documented for a taxon in Australia (e.g., Miller et al., 1999, 2005). Grellet-Tinner et al. (2016) raised several problems with the identity of the eggshell Williams (1981) attributed to Genyornis newtoni and suggested that extinct megapodes of the genus Progura were the more likely layer of this eggshell type, therein referred to as ;putative Genyornis oological material; (PGOM). Miller et al. (2017) challenged our hypothesis stating that ;Based on the dimensions of the reconstructed Spooner Egg,Grellet-Tinner et al. (2016)argue that PGOM is too small for a bird with the body mass estimated for Genyornis (168-275 kg) … …[and] …. None of the additional PGOM observations reported byGrellet-Tinner et al. (2016)are inconsistent with a Genyornis parent;. Here we take the opportunity to respond to their critique, the basis of which resolves into a few points, which we address in turn.

  9. Mowafak Al-Jassim | NREL

    Science.gov Websites

    Mowafak Al-Jassim Photo of Mowafak Al-Jassim Mowafak Al-Jassim Group Research Manager III-Materials researcher and advancing to a principal scientist and a technical manager. His research group has contributed numerous international conferences. Research Interests His research interests include the multiscale

  10. Data supporting Al-Abed et al., Environ. Sci.: Nano, 2016,

    EPA Pesticide Factsheets

    Data files representing each of the Figures and Tables published in Al-Abed et al., Environ. Sci.: Nano, 2016,3, 593. The data file names identify the Figure or Table and each file contains an internal set of data definitionsThis dataset is associated with the following publication:Al-Abed, S.R., J. Virkutyte, J. Ortenzio , R.M. McCarrick, L. Degn, R. Zucker , N. Coates , K. Cleveland, H. Ma, S. Diamond, K. Dreher , and W. Boyes. Environmental aging alters AI(OH)3 coating of TiO2 nanoparticles enhancing their photocatalytic and phototoxicity activities. Environmental Science: Nano. RSC Publishing, Cambridge, UK, N/A, (2016).

  11. Two-Phase (TiAl+TiCrAl) Coating Alloys for Titanium Aluminides

    NASA Technical Reports Server (NTRS)

    Brady, Michael P. (Inventor); Smialek, James L. (Inventor); Brindley, William J. (Inventor)

    1998-01-01

    A coating for protecting titanium aluminide alloys, including the TiAl gamma + Ti3Al (alpha(sub 2)) class, from oxidative attack and interstitial embrittlement at temperatures up to at least 1000 C. is disclosed. This protective coating consists essentially of titanium, aluminum. and chromium in the following approximate atomic ratio: Ti(41.5-34.5)Al(49-53)Cr(9.5-12.5)

  12. Labor Force Participation of Mexican Elderly: the Importance of Health*

    PubMed Central

    van Gameren, Edwin

    2017-01-01

    Se analizan los factores determinantes de la participación en la fuerza de trabajo de la póblacion mexicana de 50 años o más, con datos de la Encuesta nacional sobre salud y envejecimiento en México, ENASEM. Se estudió en particular la importancia de la salud en la decisión sobre la participación, tomando en cuenta la endogeneidad potencial de la salud. Los resultados indican que una mejor salud causa un mayor apego al mercado laboral. No se encontró evidencia clara de que el empleo afecte la salud, pero no puede descartarse que los efectos de las malas condiciones laborales y la justificación se eliminen mutuamente. Existen indicadores de que la autoevaluación de la salud no captura todos los aspectos relevantes de la salud. En la toma de decisiones para establecer políticas, la importancia directa de las circunstancias financieras podría ser más relevante que el papel de la salud. The determinants of the labor force participation of people in Mexico aged 50 and over are analyzed using data of the Mexican Health and Aging Study (MHAS). In particular we study the importance of health in the participation decision, taking into account the potential endogeneity of health. The results indicate that a better health causes a stronger attachment to the labor market. We find no clear evidence that employment affects health, but it cannot be ruled out that the effects of bad labor circumstances and justification eliminate each other. There are indications that self-assessed health does not capture all relevant aspects of health. For policy decisions the direct importance of financial circumstances could be more relevant than the role of health. PMID:29375171

  13. Labor Force Participation of Mexican Elderly: the Importance of Health.

    PubMed

    van Gameren, Edwin

    2008-01-01

    Se analizan los factores determinantes de la participación en la fuerza de trabajo de la póblacion mexicana de 50 años o más, con datos de la Encuesta nacional sobre salud y envejecimiento en México, ENASEM. Se estudió en particular la importancia de la salud en la decisión sobre la participación, tomando en cuenta la endogeneidad potencial de la salud. Los resultados indican que una mejor salud causa un mayor apego al mercado laboral. No se encontró evidencia clara de que el empleo afecte la salud, pero no puede descartarse que los efectos de las malas condiciones laborales y la justificación se eliminen mutuamente. Existen indicadores de que la autoevaluación de la salud no captura todos los aspectos relevantes de la salud. En la toma de decisiones para establecer políticas, la importancia directa de las circunstancias financieras podría ser más relevante que el papel de la salud. The determinants of the labor force participation of people in Mexico aged 50 and over are analyzed using data of the Mexican Health and Aging Study (MHAS). In particular we study the importance of health in the participation decision, taking into account the potential endogeneity of health. The results indicate that a better health causes a stronger attachment to the labor market. We find no clear evidence that employment affects health, but it cannot be ruled out that the effects of bad labor circumstances and justification eliminate each other. There are indications that self-assessed health does not capture all relevant aspects of health. For policy decisions the direct importance of financial circumstances could be more relevant than the role of health.

  14. Al Qaeda in the Arabian Peninsula (AQAP): An Al Qaeda Affiliate Case Study

    DTIC Science & Technology

    2017-10-01

    Underwear Bombing ” and an unsuccessful 2010 plan to put parcel bombs on U.S.-bound airplanes. AQAP also seeks to inspire “lone jihad” attacks in the... bomb -maker,5 and Sudanese national Ibrahim al-Qosi, a former bookkeeper for Osama Bin Laden.6 Below the emir are regional commanders and heads of...5 “Profile: Al-Qaeda ‘ Bomb Maker’ Ibrahim al-Asiri,” BBC News, July 4, 2014, http://www.bbc.com/news/world-middle-east-11662143. See also al-Asiri

  15. Screw dislocation-induced growth spirals as emissive exciton localization centers in Al-rich AlGaN/AlN quantum wells

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Funato, Mitsuru, E-mail: funato@kuee.kyoto-u.ac.jp; Banal, Ryan G.; Kawakami, Yoichi

    2015-11-15

    Screw dislocations in Al-rich AlGaN/AlN quantum wells cause growth spirals with an enhanced Ga incorporation, which create potential minima. Although screw dislocations and their surrounding potential minima suggest non-radiative recombination processes within growth spirals, in reality, screw dislocations are not major non-radiative sinks for carriers. Consequently, carriers localized within growth spirals recombine radiatively without being captured by non-radiative recombination centers, resulting in intense emissions from growth spirals.

  16. Transformation to Ni5Al3 in a 63.0 at. pct Ni-Al alloy

    NASA Technical Reports Server (NTRS)

    Khadkikar, P. S.; Locci, I. E.; Vedula, K.; Michal, G. M.

    1993-01-01

    Microstructures of 63 at. pct P/M Ni-Al alloys with a composition close to the stoichiometry of the Ni5Al3 phase were investigated using homogenized and quenched specimens aged at low temperatures for various times. Results of analyses of XRD data and electron microscopy observations were used for quantitative phase analysis, performed to calculate the (NiAl + Ni5Al3)/Ni5Al3 phase boundary locations. The measured lattice parameters of Ni5Al3 phase formed at 823, 873, and 923 K indicated an increase in tetragonality of the phase with increasing nickel content.

  17. Formation of Al3Ti/Mg composite by powder metallurgy of Mg-Al-Ti system.

    PubMed

    Yang, Zi R; Qi Wang, Shu; Cui, Xiang H; Zhao, Yu T; Gao, Ming J; Wei, Min X

    2008-07-01

    An in situ titanium trialuminide (Al 3 Ti)-particle-reinforced magnesium matrix composite has been successfully fabricated by the powder metallurgy of a Mg-Al-Ti system. The reaction processes and formation mechanism for synthesizing the composite were studied by differential scanning calorimetry (DSC), x-ray diffractometry (XRD), scanning electron microscopy (SEM) and energy-dispersive x-ray spectroscopy (EDS). Al 3 Ti particles are found to be synthesized in situ in the Mg alloy matrix. During the reaction sintering of the Mg-Al-Ti system, Al 3 Ti particles are formed through the reaction of liquid Al with as-dissolved Ti around the Ti particles. The formed intermetallic particles accumulate at the original sites of the Ti particles. As sintering time increases, the accumulated intermetallic particles disperse and reach a relatively homogeneous distribution in the matrix. It is found that the reaction process of the Mg-Al-Ti system is almost the same as that of the Al-Ti system. Mg also acts as a catalytic agent and a diluent in the reactions and shifts the reactions of Al and Ti to lower temperatures. An additional amount of Al is required for eliminating residual Ti and solid-solution strengthening of the Mg matrix.

  18. Biblioteca Virtual de Salud Enfermería Regional: Trayectoria de Construcción, Fuentes de Información, Estrategias y Próximos Pasos.

    PubMed Central

    Lana, Francisco C. F.; Malvárez, Silvina

    2012-01-01

    Resumen La BVS Enfermeria constituye un nuevo paradigma en enfermería una vez que o modelo representa una expansión de la cooperación técnica y ha como objetivos centrales promover la ampliación del acceso la información sobre enfermería la través del acceso universal equitativo y construir un patrimonio informacional en enfermería, ayudando la mejorar la formación y práctica de enfermería a actuar con compromiso ético-social en el área de educación, investigación y atención a la salud. Como resultado del proceso de sensibilización, verifica-se la construcción de Bibliotecas Virtuales de Enfermería en varios países (Brasil, Argentina, Bolívia y Uruguay). La expectativa es que las BVS’s nacionais convergen a un gran portal que se está construyendo en una colaboración con BIREME/OPS/OMS, de la Asesoría Regional de Enfermería de la OPS-Washington y de Ministerio de Salud del Brasil, así como instituciones líderes en la producción del conocimiento en enfermería Iberoamérica. PMID:24199093

  19. Bulk Al-Al3Zr composite prepared by mechanical alloying and hot extrusion for high-temperature applications

    NASA Astrophysics Data System (ADS)

    Pourkhorshid, E.; Enayati, M. H.; Sabooni, S.; Karimzadeh, F.; Paydar, M. H.

    2017-08-01

    Bulk Al/Al3Zr composite was prepared by a combination of mechanical alloying (MA) and hot extrusion processes. Elemental Al and Zr powders were milled for up to 10 h and heat treated at 600°C for 1 h to form stable Al3Zr. The prepared Al3Zr powder was then mixed with the pure Al powder to produce an Al-Al3Zr composite. The composite powder was finally consolidated by hot extrusion at 550°C. The mechanical properties of consolidated samples were evaluated by hardness and tension tests at room and elevated temperatures. The results show that annealing of the 10-h-milled powder at 600°C for 1 h led to the formation of a stable Al3Zr phase. Differential scanning calorimetry (DSC) results confirmed that the formation of Al3Zr began with the nucleation of a metastable phase, which subsequently transformed to the stable tetragonal Al3Zr structure. The tension yield strength of the Al-10wt%Al3Zr composite was determined to be 103 MPa, which is approximately twice that for pure Al (53 MPa). The yield stress of the Al/Al3Zr composite at 300°C is just 10% lower than that at room temperature, which demonstrates the strong potential for the prepared composite to be used in high-temperature structural applications.

  20. On the Solar Stimuli That Initiate Makkah Al Mukaramah, Al-Madinah Al-Munawarah And Jeddah Flash Floods

    NASA Astrophysics Data System (ADS)

    Elfaki, H.; Yousef, S.; Mawad, Ramy; Algafari, Y. H. O.; Amer, M.; Abdel-Sattar, W.

    2017-12-01

    Severe solar events manifested as highly energetic X-Ray events accompanied by coronal mass ejections ( CMEs) and proton flares caused flash floods in Makkah Al-Mukaramah, Al-Madinah Al-Munawarah and Jeddah. In the case of the 20 January 2005 CME that initiated severe flash on the 22 of January. it is shown that the CME lowered the pressure in the polar region and extended the low pressure regime to Saudi Arabia passing by the Mediterranean. Such passage accelerated evaporation and caused Cumulonimbus clouds to form and discharge flash floods over Makkah Al-Mukaramah. On the other hand, solar forcing due coronal holes have a different technique in initiating flash floods. The November 25 2009 and the 13-15 January 2011 Jeddah flash floods are attributed to prompt events due to fast solar streams emanated from two coronal holes that arrived the Earth on 24 November 2009 and 13 January 2011. We present evidences that those streams penetrated the Earth's magnetosphere and hit the troposphere at the western part of the Red Sea, dissipated their energy at 925mb geopotential height and left two hot spots. It follows that the air in the hot spots expanded and developed spots of low pressure air that spread over the Red Sea to its eastern coast. Accelerated evaporation due to reduced pressure caused quick formation of Cumulonimbus clouds that caused flash floods over Makkah Al-Mukaramah and Jeddah.

  1. Ultrafast decay of hot phonons in an AlGaN/AlN/AlGaN/GaN camelback channel

    NASA Astrophysics Data System (ADS)

    Leach, J. H.; Wu, M.; Morkoç, H.; Liberis, J.; Šermukšnis, E.; Ramonas, M.; Matulionis, A.

    2011-11-01

    A bottleneck for heat dissipation from the channel of a GaN-based heterostructure field-effect transistor is treated in terms of the lifetime of nonequilibrium (hot) longitudinal optical phonons, which are responsible for additional scattering of electrons in the voltage-biased quasi-two-dimensional channel. The hot-phonon lifetime is measured for an Al0.33Ga0.67N/AlN/Al0.1Ga0.9N/GaN heterostructure where the mobile electrons are spread in a composite Al0.1Ga0.9N/GaN channel and form a camelback electron density profile at high electric fields. In accordance with plasmon-assisted hot-phonon decay, the parameter of importance for the lifetime is not the total charge in the channel (the electron sheet density) but rather the electron density profile. This is demonstrated by comparing two structures with equal sheet densities (1 × 1013 cm-2), but with different density profiles. The camelback channel profile exhibits a shorter hot-phonon lifetime of ˜270 fs as compared with ˜500 fs reported for a standard Al0.33Ga0.67N/AlN/GaN channel at low supplied power levels. When supplied power is sufficient to heat the electrons > 600 K, ultrafast decay of hot phonons is observed in the case of the composite channel structure. In this case, the electron density profile spreads to form a camelback profile, and hot-phonon lifetime reduces to ˜50 fs.

  2. A promotores de salud intervention to reduce cardiovascular disease risk in a high-risk Hispanic border population, 2005-2008.

    PubMed

    Balcázar, Héctor G; de Heer, Hendrik; Rosenthal, Lee; Aguirre, Melissa; Flores, Leticia; Puentes, Flor A; Cardenas, Victor M; Duarte, Maria O; Ortiz, Melchor; Schulz, Leslie O

    2010-03-01

    The high prevalence of cardiovascular disease (CVD) in the Hispanic population of the United States, together with low rates of health insurance coverage, suggest a potential cardiovascular health crisis. The objective of Project HEART (Health Education Awareness Research Team) was to promote behavior changes to decrease CVD risk factors in a high-risk Hispanic border population. Project HEART took place from 2005 through 2008 as a randomized community trial with a community-based participatory research framework using promotores de salud (community health workers). A total of 328 participants with at least 1 CVD risk factor were selected by randomizing 10 US Census tracts in El Paso, Texas, to either the experimental or the control group. The experimental group (n = 192) was assigned to a series of 8 health classes using the Su Corazón, Su Vida curriculum. After 2 months of educational sessions, the group was followed for 2 months. The control group (n = 136) was given basic educational materials at baseline, and no other intervention was used. Main outcomes of interest included changes in health behaviors and clinical measures. Participants in the experimental group showed more awareness of CVD risk factors, more confidence in the control of these factors, and improved dietary habits (ie, lower salt and cholesterol intake, better weight-control practices) compared with the control group. Total cholesterol was 3% lower in the experimental than in the control participants, and nonhigh-density lipoprotein cholesterol and low-density lipoprotein cholesterol were both 5% lower. The HEART trial suggests that community health education using promotores de salud is a viable strategy for CVD risk reduction in a Hispanic border community.

  3. Enhancing phosphate adsorption by Mg/Al layered double hydroxide functionalized biochar with different Mg/Al ratios.

    PubMed

    Li, Ronghua; Wang, Jim J; Zhou, Baoyue; Awasthi, Mukesh Kumar; Ali, Amjad; Zhang, Zengqiang; Gaston, Lewis A; Lahori, Altaf Hussain; Mahar, Amanullah

    2016-07-15

    Mg/Al ratio plays a significant role for anion adsorption by Mg/Al-layered double hydroxides (Mg/Al-LDHs) modified biochar. In this study, Mg/Al-LDHs biochar with different Mg/Al ratios (2, 3, 4) were prepared by co-precipitation for phosphate removal from aqueous solution. Factors on phosphate adsorption including Mg/Al ratio, pH, and the presence of other inorganic anions were investigated through batch experiments. Increasing Mg/Al ratio in the Mg/Al-LDHs biochar composites generally enhanced phosphate adsorption with Langmuir adsorption maximum calculated at 81.83mg phosphorous (P) per gram of 4:1Mg/Al-LDHs biochar at pH3.0. The adsorption process was best described by the pseudo-second-order kinetic model. Solution pH had greater effects on the phosphate adsorption by Mg/Al LDHs biochar composites with lower Mg/Al ratios. The presence of other inorganic anions decreased the phosphate adsorption efficiency in the order of F(-) > SO4(2-) > NO2(-) >Cl(-). Phosphate adsorption mechanism involves ion exchange, electrostatic attraction and surface inner-sphere complex formation. Overall, Mg/Al-LDHs biochar composites offer a potential alternative of carbon-based adsorbent for phosphate removal from aqueous solution. Copyright © 2016 Elsevier B.V. All rights reserved.

  4. Electronic structures of Al-Si clusters and the magic number structure Al8Si4

    NASA Astrophysics Data System (ADS)

    Du, Ning; Su, Mingzhi; Chen, Hongshan

    2018-02-01

    The low-energy structures of Al8Sim (m = 1-6) have been determined by using the genetic algorithm combined with density functional theory and the Second-order Moller-Plesset perturbation theory (MP2) models. The results show that the close-packed structures are preferable in energy for Al-Si clusters and in most cases there exist a few isomers with close energies. The valence molecular orbitals, the orbital level structures and the electron localisation function (ELF) consistently demonstrate that the electronic structures of Al-Si clusters can be described by the jellium model. Al8Si4 corresponds to a magic number structure with pronounced stability and large energy gap; the 40 valence electrons form closed 1S21P61D102S21F142P6 shells. The ELF attractors also suggest weak covalent Si-Si, Si-Al and Al-Al bonding, and doping Si in aluminium clusters promotes the covalent interaction between Al atoms.

  5. Sintering of (Ni,Mg)(Al,Fe)2O4 Materials and their Corrosion Process in Na3AlF6-AlF3-K3AlF6 Electrolyte

    NASA Astrophysics Data System (ADS)

    Xu, Yibiao; Li, Yawei; Yang, Jianhong; Sang, Shaobai; Wang, Qinghu

    2017-06-01

    The application of ledge-free sidewalls in the Hall-Héroult cells can potentially reduce the energy requirement of aluminum production by about 30 pct (Nightingale et al. in J Eur Ceram, 33:2761-2765, 2013). However, this approach poses great material challenges since such sidewalls are in direct contact with corrosive electrolyte. In the present paper, (Ni,Mg)(Al,Fe)2O4 materials were prepared using fused magnesia, reactive alumina, nickel oxide, and iron oxide powders as the starting materials. The sintering behaviors of specimens as well as their corrosion resistance to molten electrolyte have been investigated by means of X-ray diffraction and scanning electron microscope. The results show that after firing at temperature ranging from 1673 K (1400 °C) up to 1873 K (1600 °C), all the specimens prepared are composed of single-phase (Ni,Mg)(Al,Fe)2O4 composite spinel, the lattice parameter of which increases with increasing Fe3+ ion concentration. Increasing the iron oxide content enhances densification of the specimens, which is accompanied by the formation of homogeneously distributed smaller pores in the matrix. The corrosion tests show that corrosion layers consist of fluoride and Ni(Al,Fe)2O4 composite spinel grains are produced in specimens with Fe/Al mole ratio no more than 1, whereas dense Ni(Al,Fe)2O4 composite spinel layers are formed on the surface of the specimens with Fe/Al mole ratio more than 1. The dense Ni(Al,Fe)2O4 composite spinel layers formed improve the corrosion resistance of the specimens by inhibiting the infiltration of electrolyte and hindering the chemical reaction between the specimen and electrolyte.

  6. Relationship between Al content and substitution mechanism of Al-bearing anhydrous bridgmanites

    NASA Astrophysics Data System (ADS)

    Noda, M.; Inoue, T.; Kakizawa, S.

    2017-12-01

    It is considered that two substitution mechanisms, Tschermak substitution and oxygen vacancy substitution, exist in MgSiO3 bridgmanite for the incorporation of Al in anhydrous condition. Kubo and Akaogi (2000) has conducted the phase equilibrium experiment in the system MgSiO3-Al2O3, and established the phase diagram up to 28 GPa. However the careful observation in the bridgmanite shows that the chemical compositions are slightly deviated from Tschermak substitution join. The same tendency can be also observed in the run products by Irifune et al. (1996). This result indicates that pure Tschermak substitution bridgmanite cannot be stable even in the MgSiO3-Al2O3 join experiment. However, the previous studies used powder samples as the starting materials, so the absorbed water may affect the results. Therefore, we tried to conduct the experiment in the join MgSiO3-Al2O3 in extremely anhydrous condition to clarify whether the pure Tschermak substitution bridgmanite can be stable or not. In addition, we also examined the stability of oxygen vacancy bridgmanite in the extremely anhydrous condition for the comparison. The high pressure synthesis experiments were conducted at 28 GPa and 1600-1700° for 1hour using a Kawai-type multi-anvil apparatus. Four different Al content samples were prepared as the starting materials along the ideal substitution line of Tschermak (Al=0.025, 0.05, 0.1, 0.15 mol) and oxygen-vacancy (Al=0.025, 0.05, 0.075, 0.1 mol) substitutions, respectively (when total cation of 2). The glass rods were used as the starting materials to eliminate the absorbed water on the sample surface. The chemical compositions of the synthesized bridgmanite could not be measured by EPMA because of small grain size less than submicron. Therefore the chemical compositions were estimated from the result of the XRD pattern by subtracting the amount of the other phases. The estimated chemical compositions of Tschermak substitution bridgmanites were consistent with the

  7. Acoustic resonator with Al electrodes on an AlN layer and using a GaAs substrate

    DOEpatents

    Kline, Gerald R.; Lakin, Kenneth M.

    1985-12-03

    A method of fabricating an acoustic wave resonator wherein all processing steps are accomplished from a single side of said substrate. The method involves deposition of a multi-layered Al/AlN structure on a GaAs substrate followed by a series of fabrication steps to define a resonator from said composite. The resulting resonator comprises an AlN layer between two Al layers and another layer of AlN on an exterior of one of said Al layers.

  8. Imaging of Al/Fe ratios in synthetic Al-goethite revealed by nanoscale secondary ion mass spectrometry.

    PubMed

    Pohl, Lydia; Kölbl, Angelika; Werner, Florian; Mueller, Carsten W; Höschen, Carmen; Häusler, Werner; Kögel-Knabner, Ingrid

    2018-04-30

    Aluminium (Al)-substituted goethite is ubiquitous in soils and sediments. The extent of Al-substitution affects the physicochemical properties of the mineral and influences its macroscale properties. Bulk analysis only provides total Al/Fe ratios without providing information with respect to the Al-substitution of single minerals. Here, we demonstrate that nanoscale secondary ion mass spectrometry (NanoSIMS) enables the precise determination of Al-content in single minerals, while simultaneously visualising the variation of the Al/Fe ratio. Al-substituted goethite samples were synthesized with increasing Al concentrations of 0.1, 3, and 7 % and analysed by NanoSIMS in combination with established bulk spectroscopic methods (XRD, FTIR, Mössbauer spectroscopy). The high spatial resolution (50-150 nm) of NanoSIMS is accompanied by a high number of single-point measurements. We statistically evaluated the Al/Fe ratios derived from NanoSIMS, while maintaining the spatial information and reassigning it to its original localization. XRD analyses confirmed increasing concentration of incorporated Al within the goethite structure. Mössbauer spectroscopy revealed 11 % of the goethite samples generated at high Al concentrations consisted of hematite. The NanoSIMS data show that the Al/Fe ratios are in agreement with bulk data derived from total digestion and demonstrated small spatial variability between single-point measurements. More advantageously, statistical analysis and reassignment of single-point measurements allowed us to identify distinct spots with significantly higher or lower Al/Fe ratios. NanoSIMS measurements confirmed the capacity to produce images, which indicated the uniform increase in Al-concentrations in goethite. Using a combination of statistical analysis with information from complementary spectroscopic techniques (XRD, FTIR and Mössbauer spectroscopy) we were further able to reveal spots with lower Al/Fe ratios as hematite. Copyright © 2018 John

  9. REFORZANDO LAS CAPACIDADES EN INVESTIGACIÓN EN INFORMÁTICA PARA LA SALUD GLOBAL EN LA REGIÓN ANDINA A TRAVÉS DE LA COLABORACIÓN INTERNACIONAL

    PubMed Central

    Curioso, Walter H.; García, Patricia J.; Castillo, Greta M.; Blas, Magaly M.; Perez-Brumer, Amaya; Zimic, Mirko

    2011-01-01

    RESUMEN Para mejorar la salud global y bienestar de una población se requiere de recursos humanos capacitados, no solo en el campo de la medicina y salud, sino también en el campo de la informática. Desafortunadamente, los programas de entrenamiento e investigación en informática biomédica en países en desarrollo son escasos y poco documentados. El objetivo del presente trabajo es reportar los resultados del primer Taller Internacional de Expertos en Informática para la región andina que se llevó a cabo en marzo de 2010 en Lima y que incluye la descripción de nueve casos de estudio procedentes de instituciones de América Latina. En el taller participaron 23 expertos latinoamericanos, quienes discutieron la necesidad de entrenamiento e investigación multidisciplinaria en informática biomédica en áreas prioritarias para América Latina. Además, se estableció la Red QUIPU debido a la necesidad de ampliar y consolidar una red de investigación y entrenamiento a nivel regional y global. PMID:21152740

  10. Burden of rare variants in ALS genes influences survival in familial and sporadic ALS.

    PubMed

    Pang, Shirley Yin-Yu; Hsu, Jacob Shujui; Teo, Kay-Cheong; Li, Yan; Kung, Michelle H W; Cheah, Kathryn S E; Chan, Danny; Cheung, Kenneth M C; Li, Miaoxin; Sham, Pak-Chung; Ho, Shu-Leong

    2017-10-01

    Genetic variants are implicated in the development of amyotrophic lateral sclerosis (ALS), but it is unclear whether the burden of rare variants in ALS genes has an effect on survival. We performed whole genome sequencing on 8 familial ALS (FALS) patients with superoxide dismutase 1 (SOD1) mutation and whole exome sequencing on 46 sporadic ALS (SALS) patients living in Hong Kong and found that 67% had at least 1 rare variant in the exons of 40 ALS genes; 22% had 2 or more. Patients with 2 or more rare variants had lower probability of survival than patients with 0 or 1 variant (p = 0.001). After adjusting for other factors, each additional rare variant increased the risk of respiratory failure or death by 60% (p = 0.0098). The presence of the rare variant was associated with the risk of ALS (Odds ratio 1.91, 95% confidence interval 1.03-3.61, p = 0.03), and ALS patients had higher rare variant burden than controls (MB, p = 0.004). Our findings support an oligogenic basis with the burden of rare variants affecting the development and survival of ALS. Copyright © 2017 The Author(s). Published by Elsevier Inc. All rights reserved.

  11. Impact of the 26mAl(p, γ) reaction to galactic 26Al yield

    NASA Astrophysics Data System (ADS)

    Kahl, D.; Shimizu, H.; Yamaguchi, H.; Abe, K.; Beliuskina, O.; Cha, S. M.; Chae, K. Y.; Chen, A. A.; Ge, Z.; Hayakawa, S.; Imai, N.; Iwasa, N.; Kim, A.; Kim, D. H.; Kim, M. J.; Kubono, S.; Kwag, M. S.; Liang, J.; Moon, J. Y.; Nishimura, S.; Oka, S.; Park, S. Y.; Psaltis, A.; Teranishi, T.; Ueno, Y.; Yang, L.

    2018-04-01

    Astrophysical observables that are directly linked to nuclear physics inputs provide critical and stringent constraints on nucleosynthetic models. As 26Al was the first specific radioactivity observed in the Galaxy, its origin has fascinated the nuclear astrophysics community for nearly forty years. Despite extensive research, the precise origins of 26Al remain elusive. At present, the sum of all putative stellar contributions generally overestimates the 26Al mass in the interstellar medium. Among the many reactions that influence the yield of 26Al, radiative proton capture on its isomer 26mAl is one of the least constrained reactions by experimental data. To this end, we developed a 26Al isomeric beam and performed proton elastic scattering to search for low-spin states in 27Si. The experimental method and the preliminary results of this on-going study will be presented.

  12. Removal of metallic Al and Al/Zn alloys in MSWI bottom ash by alkaline treatment.

    PubMed

    Xuan, Dongxing; Poon, Chi Sun

    2018-02-15

    In order to reduce the leaching of pollutants and remove the Al and Zn/Al alloy from municipal solid waste incineration bottom ash (MSWIBA), an optimized alkaline pre-treatment procedure was developed in this study. The influences of alkaline conditions on the removal rate of Al and Zn/Al alloy were investigated, including [OH] - concentration, temperature, particle size, liquid/solid ratio and treatment duration. The experimental results showed that the optimized alkaline pre-treatment conditions to efficiently remove the Al and Zn/Al alloy was by using a minimum of 1.0mol/l [OH] - , at 55°C and with a minimal liquid/solid ratio of 5. The removal rate of Al and Zn/Al alloy followed an S-shape curve, in which the slow beginning stage was attributed to the protection of the oxidation layer and the quenched product around the Al and Al/Zn alloy. After 3h of the optimized alkaline pre-treatment, the leaching of Cr, Cu, Pb and Zn of the treated MSWIBA was reduced by more than 90% of that of the original MSWIBA. The alkali-silica reaction test further indicated that the expansion of concrete prepared with the pre-treated MSWIBA was significantly reduced and there was no macro-crack or spalling damage on the surface of the tested specimens. Copyright © 2017 Elsevier B.V. All rights reserved.

  13. Current transport mechanism in graphene/AlGaN/GaN heterostructures with various Al mole fractions

    NASA Astrophysics Data System (ADS)

    Pandit, Bhishma; Seo, Tae Hoon; Ryu, Beo Deul; Cho, Jaehee

    2016-06-01

    The current transport mechanism of graphene formed on AlxGa1-xN/GaN heterostructures with various Al mole fractions (x = 0.15, 0.20, 0.30, and 0.40) is investigated. The current-voltage measurement from graphene to AlGaN/GaN shows an excellent rectifying property. The extracted Schottky barrier height of the graphene/AlGaN/GaN contacts increases with the Al mole fraction in AlGaN. However, the current transport mechanism deviates from the Schottky-Mott theory owing to the deterioration of AlGaN crystal quality at high Al mole fractions confirmed by reverse leakage current measurement.

  14. Comparison of ALS functionality and plant growth in ALS-inhibitor susceptible and resistant Myosoton aquaticum L.

    PubMed

    Liu, Weitang; Bai, Shuang; Jia, Sisi; Guo, Wenlei; Zhang, Lele; Li, Wei; Wang, Jinxin

    2017-10-01

    Herbicide target-site resistance mutations may cause pleiotropic effects on plant ecology and physiology. The effect of several known (Pro197Ser, Pro197Leu Pro197Ala, and Pro197Glu) target-site resistance mutations of the ALS gene on both ALS functionality and plant vegetative growth of weed Myosoton aquaticum L. (water chickweed) have been investigated here. The enzyme kinetics of ALS from four purified water chickweed populations that each homozygous for the specific target-site resistance-endowing mutations were characterized and the effect of these mutations on plant growth was assessed via relative growth rate (RGR) analysis. Plants homozygous for Pro197Ser and Pro197Leu exhibited higher extractable ALS activity than susceptible (S) plants, while all ALS mutations with no negative change in ALS kinetics. The Pro197Leu mutation increased ALS sensitivity to isoleucine and valine, and Pro197Glu mutation slightly increased ALS sensitivity to isoleucine. RGR results indicated that none of these ALS resistance mutations impose negative pleiotropic effects on relative growth rate. However, resistant (R) seeds had a lowed germination rate than S seeds. This study provides baseline information on ALS functionality and plant growth characteristics associated with ALS inhibitor resistance-endowing mutations in water chickweed. Copyright © 2017. Published by Elsevier Inc.

  15. Structural inheritance and difference between Ti 2AlC, Ti 3AlC 2  and Ti 5Al 2C 3 under pressure from first principles

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Gao, Qing -He; Du, An; Yang, Ze -Jin

    The structural inheritance and difference between Ti 2AlC, Ti 3AlC 2 and Ti 5Al 2C 3 under pressure from first principles are studied. The results indicate that the lattice parameter a are almost the same within Ti 2AlC, Ti 3AlC 2 and Ti 5Al 2C 3, and the value of c in Ti 5Al 2C 3 is the sum of Ti 2AlC and Ti 3AlC 2 which is revealed by the covalently bonded chain in the electron density difference: Al–Ti–C–Ti–Al for Ti 2AlC, Al–Ti 2–C–Ti 1–C–Ti 2–Al for Ti 3AlC 2 and Al–Ti 3–C 2–Ti 3–Al–Ti 2–C 1–Ti 1–C 1–Timore » 2–Al for Ti 5Al 2C 3. The calculated axial compressibilities, volumetric shrinkage, elastic constant c 11, c 33/c 11 ratio, bulk modulus, shear modulus, and Young’s modulus of Ti 5Al 2C 3 are within the range of the end members (Ti 2AlC and Ti 3AlC 2) in a wide pressure range of 0–100 GPa. Only Ti 2AlC is isotropic crystal at about 50 GPa within the Ti–Al–C compounds. All of the Ti 3 d density of states curves of the three compounds move from lower energy to higher energy level with pressure increasing. The similarities of respective bond length, bond overlap population (Ti–C, Ti–Al and Ti–Ti), atom Mulliken charges under pressure as well as the electron density difference for the three compounds are discovered. Among the Ti–Al–C ternary compounds, Ti–Ti bond behaves least compressibility, whereas the Ti–Al bond is softer than that of Ti–C bonds, which can also been confirmed by the density of states and electron density difference. Bond overlap populations of Ti–Ti, Ti–C and Ti–Al indicate that the ionicity interaction becomes more and more stronger in the three structures as the pressure increasing. Lastly, Mulliken charges of Ti 1, Ti 2, Ti 3, C and Al are 0.65, 0.42, 0.39, –0.73, –0.04 at 0 GPa, respectively, which are consistent with the Pauling scale.« less

  16. Structural inheritance and difference between Ti 2AlC, Ti 3AlC 2  and Ti 5Al 2C 3 under pressure from first principles

    DOE PAGES

    Gao, Qing -He; Du, An; Yang, Ze -Jin

    2017-02-08

    The structural inheritance and difference between Ti 2AlC, Ti 3AlC 2 and Ti 5Al 2C 3 under pressure from first principles are studied. The results indicate that the lattice parameter a are almost the same within Ti 2AlC, Ti 3AlC 2 and Ti 5Al 2C 3, and the value of c in Ti 5Al 2C 3 is the sum of Ti 2AlC and Ti 3AlC 2 which is revealed by the covalently bonded chain in the electron density difference: Al–Ti–C–Ti–Al for Ti 2AlC, Al–Ti 2–C–Ti 1–C–Ti 2–Al for Ti 3AlC 2 and Al–Ti 3–C 2–Ti 3–Al–Ti 2–C 1–Ti 1–C 1–Timore » 2–Al for Ti 5Al 2C 3. The calculated axial compressibilities, volumetric shrinkage, elastic constant c 11, c 33/c 11 ratio, bulk modulus, shear modulus, and Young’s modulus of Ti 5Al 2C 3 are within the range of the end members (Ti 2AlC and Ti 3AlC 2) in a wide pressure range of 0–100 GPa. Only Ti 2AlC is isotropic crystal at about 50 GPa within the Ti–Al–C compounds. All of the Ti 3 d density of states curves of the three compounds move from lower energy to higher energy level with pressure increasing. The similarities of respective bond length, bond overlap population (Ti–C, Ti–Al and Ti–Ti), atom Mulliken charges under pressure as well as the electron density difference for the three compounds are discovered. Among the Ti–Al–C ternary compounds, Ti–Ti bond behaves least compressibility, whereas the Ti–Al bond is softer than that of Ti–C bonds, which can also been confirmed by the density of states and electron density difference. Bond overlap populations of Ti–Ti, Ti–C and Ti–Al indicate that the ionicity interaction becomes more and more stronger in the three structures as the pressure increasing. Lastly, Mulliken charges of Ti 1, Ti 2, Ti 3, C and Al are 0.65, 0.42, 0.39, –0.73, –0.04 at 0 GPa, respectively, which are consistent with the Pauling scale.« less

  17. A study on wear resistance and microcrack of the Ti 3Al/TiAl + TiC ceramic layer deposited by laser cladding on Ti-6Al-4V alloy

    NASA Astrophysics Data System (ADS)

    Li, Jianing; Chen, Chuanzhong; Squartini, Tiziano; He, Qingshan

    2010-12-01

    Laser cladding of the Al + TiC alloy powder on Ti-6Al-4V alloy can form the Ti 3Al/TiAl + TiC ceramic layer. In this study, TiC particle-dispersed Ti 3Al/TiAl matrix ceramic layer on the Ti-6Al-4V alloy by laser cladding has been researched by means of X-ray diffraction, scanning electron microscope, electron probe micro-analyzer, energy dispersive spectrometer. The main difference from the earlier reports is that Ti 3Al/TiAl has been chosen as the matrix of the composite coating. The wear resistance of the Al + 30 wt.% TiC and the Al + 40 wt.% TiC cladding layer was approximately 2 times greater than that of the Ti-6Al-4V substrate due to the reinforcement of the Ti 3Al/TiAl + TiC hard phases. However, when the TiC mass percent was above 40 wt.%, the thermal stress value was greater than the materials yield strength limit in the ceramic layer, the microcrack was present and its wear resistance decreased.

  18. Al-Mg isotopic evidence for episodic alteration of Ca-Al-rich inclusions from Allende

    NASA Astrophysics Data System (ADS)

    Fagan, T. J.; Guan, Y.; MacPherson, G. J.

    2007-08-01

    Textures, mineral assemblages, and Al-Mg isotope systematics indicate a protracted, episodic secondary mineralization history for Allende Ca-Al-rich inclusions (CAIs). Detailed observations from one type B1 CAI, one B2, one compact type A (CTA), and one fluffy type A (FTA) indicate that these diverse types of CAIs are characterized by two distinct textural and mineralogic types of secondary mineralization: (1) grossular-rich domains, concentrated along melilite grain boundaries in CAI interiors, and (2) feldspathoid-bearing domains, confined mostly to CAI margins just interior to the Wark-Lovering rim sequence. The Al-Mg isotopic compositions of most secondary minerals in the type B1 CAI, and some secondary minerals in the other CAIs, show no resolvable excesses of 26Mg, whereas the primary CAI phases mostly yield correlated excesses of 26Mg with increasing Al/Mg corresponding to "canonical" initial 26Al/27Al ˜ 4.5-5 × 10-5. These secondary minerals formed at least 3 Ma after the primary CAI minerals. All but two analyses of secondary minerals from the fluffy type-A CAI define a correlated increase in 26Mg/24Mg with increasing Al/Mg, yielding (26Al/27Al)0 = (4.9 ± 2.8) × 10-6. The secondary minerals in this CAI formed 1.8-3.2 Ma after the primary CAI minerals. In both cases, the timing of secondary alteration is consistent with, but does not necessarily require, alteration in an asteroidal setting. One grossular from the type B2 CAI, and several grossular and secondary feldspar analyses from the compact type A CAI, have excesses of 26Mg consistent with initial 26Al/27Al ˜ 4.5 × 10-5. Especially in the compact type A CAI, where 26Mg/24Mg in grossular correlates with increasing Al/Mg, these 26Mg excesses are almost certainly due to in situ decay of 26Al. They indicate a nebular setting for formation of the grossular. The preservation of these diverse isotopic patterns indicates that heating on the Allende parent body was not pervasive enough to reset isotopic

  19. Experimental evidences for reducing Mg activation energy in high Al-content AlGaN alloy by MgGa δ doping in (AlN)m/(GaN)n superlattice

    PubMed Central

    Wang, Xiao; Wang, Wei; Wang, Jingli; Wu, Hao; Liu, Chang

    2017-01-01

    P-type doping in high Al-content AlGaN alloys is a main challenge for realizing AlGaN-based deep ultraviolet optoelectronics devices. According to the first-principles calculations, Mg activation energy may be reduced so that a high hole concentration can be obtained by introducing nanoscale (AlN)5/(GaN)1 superlattice (SL) in Al0.83Ga0.17N disorder alloy. In this work, experimental evidences were achieved by analyzing Mg doped high Al-content AlGaN alloys and Mg doped AlGaN SLs as well as MgGa δ doped AlGaN SLs. Mg acceptor activation energy was significantly reduced from 0.378 to 0.331 eV by using MgGa δ doping in SLs instead of traditional doping in alloys. This new process was confirmed to be able to realize high p-type doping in high Al-content AlGaN. PMID:28290480

  20. Experimental evidences for reducing Mg activation energy in high Al-content AlGaN alloy by MgGa δ doping in (AlN)m/(GaN)n superlattice

    NASA Astrophysics Data System (ADS)

    Wang, Xiao; Wang, Wei; Wang, Jingli; Wu, Hao; Liu, Chang

    2017-03-01

    P-type doping in high Al-content AlGaN alloys is a main challenge for realizing AlGaN-based deep ultraviolet optoelectronics devices. According to the first-principles calculations, Mg activation energy may be reduced so that a high hole concentration can be obtained by introducing nanoscale (AlN)5/(GaN)1 superlattice (SL) in Al0.83Ga0.17N disorder alloy. In this work, experimental evidences were achieved by analyzing Mg doped high Al-content AlGaN alloys and Mg doped AlGaN SLs as well as MgGa δ doped AlGaN SLs. Mg acceptor activation energy was significantly reduced from 0.378 to 0.331 eV by using MgGa δ doping in SLs instead of traditional doping in alloys. This new process was confirmed to be able to realize high p-type doping in high Al-content AlGaN.

  1. Experimental evidences for reducing Mg activation energy in high Al-content AlGaN alloy by MgGa δ doping in (AlN)m/(GaN)n superlattice.

    PubMed

    Wang, Xiao; Wang, Wei; Wang, Jingli; Wu, Hao; Liu, Chang

    2017-03-14

    P-type doping in high Al-content AlGaN alloys is a main challenge for realizing AlGaN-based deep ultraviolet optoelectronics devices. According to the first-principles calculations, Mg activation energy may be reduced so that a high hole concentration can be obtained by introducing nanoscale (AlN) 5 /(GaN) 1 superlattice (SL) in Al 0.83 Ga 0.17 N disorder alloy. In this work, experimental evidences were achieved by analyzing Mg doped high Al-content AlGaN alloys and Mg doped AlGaN SLs as well as Mg Ga δ doped AlGaN SLs. Mg acceptor activation energy was significantly reduced from 0.378 to 0.331 eV by using Mg Ga δ doping in SLs instead of traditional doping in alloys. This new process was confirmed to be able to realize high p-type doping in high Al-content AlGaN.

  2. Evaporación dinámica del cinturón de asteroides original

    NASA Astrophysics Data System (ADS)

    Brunini, A.

    Hemos integrado numéricamente un enjambre de 3000 partículas en la región del cinturón de asteroides, sujetas a las perturbaciones gravitatorias de Júpiter y Saturno. Al cabo de 107 años, se han formado ya todos los gaps de Kirkwood observados en el cinturón actual. El grupo en la resonancia 3/2 es, aunque en menor grado, también visible. Los tiempos de Lyapunov computados para los asteroides sobrevivientes, nos ha permitido encontrar la fracción de ellos que es capaz de sobrevivir por toda la edad del sistema solar, merced a la aplicacion de la relación empírica que vincula dichos tiempos al tiempo en el cual se manifiestan grandes transiciones orbitales. La fracción de supervivientes es de aproximadamente 1/100. El resto de la masa faltante en el cinturón, es atribuible a colisiones catastróficas con cometas en etapas primordiales.

  3. Al-centered icosahedral ordering in Cu46Zr46Al8 bulk metallic glass

    NASA Astrophysics Data System (ADS)

    Fang, H. Z.; Hui, X.; Chen, G. L.; Liu, Z. K.

    2009-03-01

    Icosahedral short-range order, of which Al atoms are caged in the center of icosahedra with Cu and Zr atoms being the vertices, has been evidenced in the Cu46Zr46Al8 glassy structure by ab initio molecular dynamics simulation. These Al-centered clusters distribute irregularly in the three-dimensional space and form a "backbone" structure of the Cu46Zr46Al8 glass alloy. It is suggested that this kind of local structural feature is attributed to the requirement of efficient dense packing and the chemical affinity between Zr-Zr, Zr-Al, and Cu-Zr atoms. Our calculated results are found to be in good agreement with the experimental data.

  4. Al Basrah, Iraq

    NASA Image and Video Library

    2017-12-08

    Al Basrah, Iraq Sensor: L7 ETM+ Acquisition Date: April 4, 2003 Path/Row: 166/39 Lat/Long: 30.486/47.811 Smoke drifts south in this image of Al Basrah, located in southeastern Iraq. The green circles from the center to the left of the image represent irrigated crops.

  5. Al Speciation in Silicate Melts: AlV a new Network Former?

    NASA Astrophysics Data System (ADS)

    Neuville, D. R.; Florian, P.; de Ligny, D.; Montouillout, V.; Massiot, D.

    2009-05-01

    The first human glasses were made 3500 BC. It was essentially sodo-lime silicate glass. To improve the chemical resistance, the thermal properties and increase the viscosity it is interesting to add aluminum in these silicates. But what is the speciation of the aluminum and how it varies according to the chemical composition and to the temperature? The aluminum appears essentially in four or five fold coordination in glasses and melts melted. The proportion of [5]Al varies according to the alkaline or to the earth-alkaline content and to the temperature. We shall present in a first part the influence of the network-modifier on the proportion of [5]Al and then we shall present some new results of absorption of high-temperature using NMR and XANES spectroscopy at the Al K-edge. Finally, from glass transition temperature measurements we propose to explain that [5]Al can be a new network former.

  6. Microstructure and Properties of 5083 Al/1060 Al/AZ31 Composite Plate Fabricated by Explosive Welding

    NASA Astrophysics Data System (ADS)

    Yang, Suyuan; Bao, Jiawei

    2018-03-01

    A 5083 Al/1060 Al/AZ31 composite plate was fabricated by explosive welding. The microstructure and properties of the composite plate were investigated after explosive welding. The results showed that all bonding interfaces were wavy interfaces. With an increasing distance from the detonation point, the wavelength and the amplitude also increased. The EDS results indicated that a 5-μm diffusion layer was observed at the 1060 Al/AZ31 layer, including the Mg2Al3 phase. Adiabatic shear bands and twin structures were observed in AZ31. The shear bond strength of the 5083 Al/1060 Al interface was 60 MPa, and the shear bond strength of the 1060 Al/AZ31 interface was 84 MPa.

  7. NEK1 genetic variability in a Belgian cohort of ALS and ALS-FTD patients.

    PubMed

    Nguyen, Hung Phuoc; Van Mossevelde, Sara; Dillen, Lubina; De Bleecker, Jan L; Moisse, Matthieu; Van Damme, Philip; Van Broeckhoven, Christine; van der Zee, Julie

    2018-01-01

    We evaluated the genetic impact of the amyotrophic lateral sclerosis (ALS) risk gene never in mitosis gene a-related kinase 1 (NEK1) in a Belgian cohort of 278 patients with ALS (n = 245) or ALS with frontotemporal dementia (ALS-FTD, n = 33) and 609 control individuals. We identified 2 ALS patients carrying a loss-of-function (LOF) mutation, p.Leu854Tyrfs*2 and p.Tyr871Valfs*17, that was absent in the control group. A third LOF variant p.Ser1036* was present in 2 sibs with familial ALS but also in an unrelated control person. Missense variants were common in both patients (3.6%) and controls (3.0%). The missense variant, p.Arg261His, which was previously associated with ALS risk, was detected with a minor allele frequency of 0.90% in patients compared to 0.33% in controls. Taken together, NEK1 LOF variants accounted for 1.1% of patients, although interpretation of pathogenicity and penetrance is complicated by the observation of occasional LOF variants in unaffected individuals (0.16%). Furthermore, enrichment of additional ALS gene mutations was observed in NEK1 carriers, suggestive of a "second hit" model were NEK1 variants may modify disease presentation of driving mutations. Copyright © 2017 The Author(s). Published by Elsevier Inc. All rights reserved.

  8. Arsenic entrapment by nanocrystals of Al-magnetite: The role of Al in crystal growth and As retention.

    PubMed

    Freitas, Erico T F; Stroppa, Daniel G; Montoro, Luciano A; de Mello, Jaime W V; Gasparon, Massimo; Ciminelli, Virginia S T

    2016-09-01

    The nature of As-Al-Fe co-precipitates aged for 120 days are investigated in detail by High Resolution Transmission Electron Microscopy (HRTEM), Scanning TEM (STEM), electron diffraction, Energy Dispersive X-Ray Spectroscopy (EDS), Electron Energy-Loss Spectroscopy (EELS), and Energy Filtered Transmission Electron Microscopy (EFTEM). The Al present in magnetite is shown to favour As incorporation (up to 1.10 wt%) relative to Al-free magnetite and Al-goethite, but As uptake by Al-magnetite decreases with increasing Al substitution (3.53-11.37 mol% Al). Arsenic-bearing magnetite and goethite mesocrystals (MCs) are formed by oriented aggregation (OA) of primary nanoparticles (NPs). Well-crystalline magnetite likely formed by Otswald ripening was predominant in the Al-free system. The As content in Al-goethite MCs (having approximately 13% substituted Al) was close to the EDS detection limit (0.1 wt% As), but was below detection in Al-goethites with 23.00-32.19 mol% Al. Our results show for the first time the capacity of Al-magnetite to incorporate more As than Al-free magnetite, and the role of Al in favouring OA-based crystal growth under the experimental conditions, and therefore As retention in the formed MCs. The proposed mechanism of As incorporation involves adsorption of As onto the newly formed NPs. Arsenic is then trapped in the MCs as they grow by self-assembly OA upon attachment of the NPs. We conclude that Al may diffuse to the crystal faces with high surface energy to reduce the total energy of the system during the attachment events, thus favouring the oriented aggregation. Copyright © 2016 Elsevier Ltd. All rights reserved.

  9. Electronic circuits having NiAl and Ni.sub.3 Al substrates

    DOEpatents

    Deevi, Seetharama C.; Sikka, Vinod K.

    1999-01-01

    An electronic circuit component having improved mechanical properties and thermal conductivity comprises NiAl and/or Ni.sub.3 Al, upon which an alumina layer is formed prior to applying the conductive elements. Additional layers of copper-aluminum alloy or copper further improve mechanical strength and thermal conductivity.

  10. Transcriptome Analysis of Al-Induced Genes in Buckwheat (Fagopyrum esculentum Moench) Root Apex: New Insight into Al Toxicity and Resistance Mechanisms in an Al Accumulating Species

    PubMed Central

    Xu, Jia Meng; Fan, Wei; Jin, Jian Feng; Lou, He Qiang; Chen, Wei Wei; Yang, Jian Li; Zheng, Shao Jian

    2017-01-01

    Relying on Al-activated root oxalate secretion, and internal detoxification and accumulation of Al, buckwheat is highly Al resistant. However, the molecular mechanisms responsible for these processes are still poorly understood. It is well-known that root apex is the critical region of Al toxicity that rapidly impairs a series of events, thus, resulting in inhibition of root elongation. Here, we carried out transcriptome analysis of the buckwheat root apex (0–1 cm) with regards to early response (first 6 h) to Al stress (20 μM), which is crucial for identification of both genes and processes involved in Al toxicity and tolerance mechanisms. We obtained 34,469 unigenes with 26,664 unigenes annotated in the NCBI database, and identified 589 up-regulated and 255 down-regulated differentially expressed genes (DEGs) under Al stress. Functional category analysis revealed that biological processes differ between up- and down-regulated genes, although ‘metabolic processes’ were the most affected category in both up- and down-regulated DEGs. Based on the data, it is proposed that Al stress affects a variety of biological processes that collectively contributes to the inhibition of root elongation. We identified 30 transporter genes and 27 transcription factor (TF) genes induced by Al. Gene homology analysis highlighted candidate genes encoding transporters associated with Al uptake, transport, detoxification, and accumulation. We also found that TFs play critical role in transcriptional regulation of Al resistance genes in buckwheat. In addition, gene duplication events are very common in the buckwheat genome, suggesting a possible role for gene duplication in the species’ high Al resistance. Taken together, the transcriptomic analysis of buckwheat root apex shed light on the processes that contribute to the inhibition of root elongation. Furthermore, the comprehensive analysis of both transporter genes and TF genes not only deep our understanding on the responses

  11. Transcriptome Analysis of Al-Induced Genes in Buckwheat (Fagopyrum esculentum Moench) Root Apex: New Insight into Al Toxicity and Resistance Mechanisms in an Al Accumulating Species.

    PubMed

    Xu, Jia Meng; Fan, Wei; Jin, Jian Feng; Lou, He Qiang; Chen, Wei Wei; Yang, Jian Li; Zheng, Shao Jian

    2017-01-01

    Relying on Al-activated root oxalate secretion, and internal detoxification and accumulation of Al, buckwheat is highly Al resistant. However, the molecular mechanisms responsible for these processes are still poorly understood. It is well-known that root apex is the critical region of Al toxicity that rapidly impairs a series of events, thus, resulting in inhibition of root elongation. Here, we carried out transcriptome analysis of the buckwheat root apex (0-1 cm) with regards to early response (first 6 h) to Al stress (20 μM), which is crucial for identification of both genes and processes involved in Al toxicity and tolerance mechanisms. We obtained 34,469 unigenes with 26,664 unigenes annotated in the NCBI database, and identified 589 up-regulated and 255 down-regulated differentially expressed genes (DEGs) under Al stress. Functional category analysis revealed that biological processes differ between up- and down-regulated genes, although 'metabolic processes' were the most affected category in both up- and down-regulated DEGs. Based on the data, it is proposed that Al stress affects a variety of biological processes that collectively contributes to the inhibition of root elongation. We identified 30 transporter genes and 27 transcription factor (TF) genes induced by Al. Gene homology analysis highlighted candidate genes encoding transporters associated with Al uptake, transport, detoxification, and accumulation. We also found that TFs play critical role in transcriptional regulation of Al resistance genes in buckwheat. In addition, gene duplication events are very common in the buckwheat genome, suggesting a possible role for gene duplication in the species' high Al resistance. Taken together, the transcriptomic analysis of buckwheat root apex shed light on the processes that contribute to the inhibition of root elongation. Furthermore, the comprehensive analysis of both transporter genes and TF genes not only deep our understanding on the responses of

  12. Some TEM observations of Al2O3 scales formed on NiCrAl alloys

    NASA Technical Reports Server (NTRS)

    Smialek, J.; Gibala, R.

    1979-01-01

    The microstructural development of Al2O3 scales on NiCrAl alloys has been examined by transmission electron microscopy. Voids were observed within grains in scales formed on a pure NiCrAl alloy. Both voids and oxide grains grew measurably with oxidation time at 1100 C. The size and amount of porosity decreased towards the oxide-metal growth interface. The voids resulted from an excess number of oxygen vacancies near the oxidemetal interface. Short-circuit diffusion paths were discussed in reference to current growth stress models for oxide scales. Transient oxidation of pure, Y-doped, and Zr-doped NiCrAl was also examined. Oriented alpha-(Al, Cr)2O3 and Ni(Al, Cr)2O4 scales often coexisted in layered structures on all three alloys. Close-packed oxygen planes and directions in the corundum and spinel layers were parallel. The close relationship between oxide layers provided a gradual transition from initial transient scales to steady state Al2O3 growth.

  13. Transitions in Al Coordination during Gibbsite Crystallization Using High-Field 27 Al and 23 Na MAS NMR Spectroscopy

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hu, Jian Zhi; Zhang, Xin; Jaegers, Nicholas R.

    Mechanisms of nucleation and growth of Al hydroxides such as gibbsite from aqueous solution, particularly in highly alkaline conditions, remain poorly understood. In this work, quantitative 27Al and 22Na MAS NMR experiments were conducted on solid samples extracted from the crystallization of gibbsite from an amorphous aluminum hydroxide gel precursor. The use of high magnetic field and fast sample spinning allowed transitional tetrahedral (AlT) and pentahedral (AlP) aluminum species to be observed along with the octahedral aluminum (AlO) that dominates the gibbsite product. Low-coordinated Al species could be detected at concentrations as low as 0.1% of the total Al sites.more » It is established that (a) AlT and AlP coexist on the surface of growing gibbsites even with a combined percentage over the total Al sites of less than 1%; (b) Different synthesis methods generate gibbsite with varying amounts of low-coordinated Al; (c) the amorphous gel precursor contains a significant amount of low-coordinated Al sites with AO: AlP: AlT ratios of approximately 4:2:1; (d) upon hydration, the external, low-coordinated Al sites become six-fold coordinated by interacting with the oxygen in H2O and the 27Al MAS NMR peak position shifts to that for the AlO sites; (e) gibbsite with increased long range order is synthesized over longer times by gradually incorporating residual AlP and AlT sites into octahedrally-coordinated AlO sites; (f) trace Na is predominantly a surface species on gibbsite particles. These findings provide a basis for understanding the gibbsite crystallization mechanism, along with a general means of characterizing gibbsite surface properties that are of equal importance for understanding related processes such as dissolution behavior.« less

  14. Adhesive and tribocorrosive behavior of TiAlPtN/TiAlN/TiAl multilayers sputtered coatings over CoCrMo

    NASA Astrophysics Data System (ADS)

    Canto, C. E.; Andrade, E.; Rocha, M. F.; Alemón, B.; Flores, M.

    2017-09-01

    The tribocorrosion resistance and adherence of multilayer coatings of TiAlPtN/TiAlN/TiAl synthesized by PVD reactive magnetron sputtering over a CoCrMo alloy substrate in 10 periods of 30 min each were analyzed and compared to those of the substrate alone and to that of a TiAlPtN single layer coating of the same thickness. The objective of the present work was to create multilayers with different amounts of Pt in order to enhance the tribocorrosion resistance of a biomedical alloy of CoCrMo. Tribocorrosion tests were performed using Simulated Body Fluid (SBF) at typical body temperature with a tribometer in a pin on disk test. The elemental composition and thickness of the coating which behave better at the tribocorrosion tests were evaluated by means of RBS (Rutherford Backscattering Spectroscopy) IBA (Ion Beam Analysis) technique, using an alpha particles beam of 1.8 MeV, before and after the reciprocating motion in the tribocorrosion test. In order to simulate the elemental profile of the samples, the SIMNRA simulation computer code was used. Measurements of the adhesion of the coatings to the substrate were carried on by means of a scratch test using a tribometer. By taking micrographs of the produced tracks, the critical loads at which the coatings are fully separated from the substrate were determined. From these tests it was observed that a coating with 10 min of TiAlPtN in a TiAlPtN/TiAl period of 30 min in multilayers of 10 periods and with an average thickness of 145 nm for the TiAlPtN nanolayers had the best tribocorrosion resistance behavior, compared to that of the CoCrMo alloy. The RBS experiments showed a reduction of the thickness of the films along with some loss of the multilayer structure after the reciprocating motion. The adhesion tests indicated that the multilayer with the average TiAlPtN thickness of 145 nm displayed the highest critical load. These results indicate a high correlation between the adherence and the tribocorrosion behavior.

  15. Microstructure of Reaction Zone Formed During Diffusion Bonding of TiAl with Ni/Al Multilayer

    NASA Astrophysics Data System (ADS)

    Simões, Sónia; Viana, Filomena; Koçak, Mustafa; Ramos, A. Sofia; Vieira, M. Teresa; Vieira, Manuel F.

    2012-05-01

    In this article, the characterization of the interfacial structure of diffusion bonding a TiAl alloy is presented. The joining surfaces were modified by Ni/Al reactive multilayer deposition as an alternative approach to conventional diffusion bonding. TiAl substrates were coated with alternated Ni and Al nanolayers. The nanolayers were deposited by dc magnetron sputtering with 14 nm of period (bilayer thickness). Joining experiments were performed at 900 °C for 30 and 60 min with a pressure of 5 MPa. Cross sections of the joints were prepared for characterization of their interfaces by scanning electron microscopy (SEM), transmission electron microscopy (TEM), scanning transmission electron microscopy (STEM), high resolution TEM (HRTEM), energy dispersive x-ray spectroscopy (EDS), and electron backscatter diffraction (EBSD). Several intermetallic compounds form at the interface, assuring the bonding of the TiAl. The interface can be divided into three distinct zones: zone 1 exhibits elongated nanograins, very small equiaxed grains are observed in zone 2, while zone 3 has larger equiaxed grains. EBSD analysis reveals that zone 1 corresponds to the intermetallic Al2NiTi and AlNiTi, and zones 2 and 3 to NiAl.

  16. Processing of In-Situ Al-AlN Metal Matrix Composites via Direct Nitridation Method

    DTIC Science & Technology

    1998-04-01

    to prepare the aluminum melts with desired chemical compositions. Table 1. Chemical compositions of the starting materials. Alloy Mg Fe Cr Si Ni Al...Al 0.001 0.11 0.001 0.04 0.005 bal. Alloy Al Fe Cr Si Ni Mg Mg 0.01 0.12 0.001 0.03 0.006 bal. The ingots were initially cut to chunks with...hours. Figure 26 shows the optical micrographs obtained from the ingots after nitridation reaction of the alloys initially containing Al- 5wt .% Si

  17. Revealing heterogeneous nucleation of primary Si and eutectic Si by AlP in hypereutectic Al-Si alloys.

    PubMed

    Li, Jiehua; Hage, Fredrik S; Liu, Xiangfa; Ramasse, Quentin; Schumacher, Peter

    2016-04-28

    The heterogeneous nucleation of primary Si and eutectic Si can be attributed to the presence of AlP. Although P, in the form of AlP particles, is usually observed in the centre of primary Si, there is still a lack of detailed investigations on the distribution of P within primary Si and eutectic Si in hypereutectic Al-Si alloys at the atomic scale. Here, we report an atomic-scale experimental investigation on the distribution of P in hypereutectic Al-Si alloys. P, in the form of AlP particles, was observed in the centre of primary Si. However, no significant amount of P was detected within primary Si, eutectic Si and the Al matrix. Instead, P was observed at the interface between the Al matrix and eutectic Si, strongly indicating that P, in the form of AlP particles (or AlP 'patch' dependent on the P concentration), may have nucleated on the surface of the Al matrix and thereby enhanced the heterogeneous nucleation of eutectic Si. The present investigation reveals some novel insights into heterogeneous nucleation of primary Si and eutectic Si by AlP in hypereutectic Al-Si alloys and can be used to further develop heterogeneous nucleation mechanisms based on adsorption.

  18. Assessment of phase constitution on the Al-rich region of rapidly solidified Al-Co-Fe-Cr alloys

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wolf, W., E-mail: witorw@gmail.com

    The formation of quasicrystalline approximants in rapidly solidified Al-Co-Fe-Cr alloys was investigated. Alloys of atomic composition Al{sub 71}Co{sub 13}Fe{sub 8}Cr{sub 8}, Al{sub 77}Co{sub 11}Fe{sub 6}Cr{sub 6} and Al{sub 76}Co{sub 19}Fe{sub 4}Cr{sub 1} were produced using melt spinning and arc melting methods and their microstructural characterization was carried out by X-ray diffraction, scanning electron microscopy and transmission electron microscopy. Up to the present there is no consensus in the literature regarding the formation of quasicrystalline phase or quasicrystalline approximants in the Al{sub 71}Co{sub 13}Fe{sub 8}Cr{sub 8} alloy. This work presents, for the first time, a detailed structural characterization of selected alloysmore » in the Al-Co-Fe-Cr system close to the atomic composition Al{sub 71}Co{sub 13}Fe{sub 8}Cr{sub 8}. The results indicated the samples to be composed, mostly, by two intermetallic phases, which are quaternary extensions of Al{sub 5}Co{sub 2} and Al{sub 13}Co{sub 4} and are quasicrystalline approximants. Although the Al{sub 5}Co{sub 2} phase has already been reported in the Al{sub 71}Co{sub 13}Fe{sub 8}Cr{sub 8} alloy, the presence of the monoclinic Al{sub 13}Co{sub 4} is now identified for the first time in the as cast state. In the binary Al-Co system a quasicrystalline phase is known to form in a rapidly solidified alloy with composition close to the monoclinic and orthorhombic Al{sub 13}Co{sub 4} phases. This binary quasicrystalline phase presents an average valence electron per atom (e/a) between 1.7 and 1.9; thus, in addition to the Al{sub 71}Co{sub 13}Fe{sub 8}Cr{sub 8} alloy, the compositions Al{sub 77}Co{sub 11}Fe{sub 6}Cr{sub 6} and Al{sub 76}Co{sub 19}Fe{sub 4}Cr{sub 1} were chosen to be within the region of formation of the quaternary extension of the Al{sub 13}Co{sub 4} phase and also within the (e/a) of 1.7 to 1.9. However, no quasicrystalline phase is present in any of the studied alloys. The Al

  19. Statins: Do They Cause ALS?

    MedlinePlus

    Statins: Do they cause ALS? Do statins cause amyotrophic lateral sclerosis (ALS)? Answers from Francisco Lopez-Jimenez, M.D. ... D. Ingre C, et al. Risk factors for amyotrophic lateral sclerosis. Clinical Epidemiology. 2015; 7:181. Riva N, et ...

  20. 1000 to 1300 K slow plastic compression properties of Al-deficient NiAl

    NASA Technical Reports Server (NTRS)

    Whittenberger, J. D.; Kumar, K. S.; Mannan, S. K.

    1991-01-01

    Nickel aluminides containing 37, 38.5 and 40 at. pct Al have been fabricated by XD synthesis and hot pressing. Such materials were compression tested in air under constant velocity conditions between 1000 and 1300 K. Examination of the microstructures of hot pressed and compression tested aluminides indicated that the structure consisted of two phases, gamma-prime and NiAl, for essentially all conditions, where gamma-prime was usually found on the NiAl grain boundaries. The stress-strain behavior of all three intermetallics was similar where flow at a nominally constant stress occurred after about two-percent plastic deformation. Furthermore, the 1000 to 1300 K flow stress-strain rate properties are nearly identical for these materials, and they are much lower than those for XD processed Ni-50Al. The overall deformation of the two phase nickel aluminides appears to be controlled by dislocation climb in NiAl rather than processes in gamma-prime.

  1. Fabrication of SiC-Particles-Shielded Al Spheres upon Recycling Al/SiC Composites

    NASA Astrophysics Data System (ADS)

    Madarasz, D.; Budai, I.; Kaptay, G.

    2011-06-01

    Wettability of liquid A359 alloy on SiC particles under molten salt NaCl-KCl-NaF is found at 180 deg, meaning that SiC particles prefer the molten salt phase against the Al phase or the Al/molten salt interface. Thus, this molten salt can be used for recycling, i.e., to separate the phases in the SiC reinforced Al matrix composites. If the separation process is interrupted, Al droplets (submillimeter solidified powder) can be produced, stabilized/surrounded by a monolayer of shielding SiC particles.

  2. Advanced life support (ALS) instructors experience of ALS education in Western Australia: a qualitative exploratory research study.

    PubMed

    Taplin, John; McConigley, Ruth

    2015-04-01

    When cardiac arrest occurs, timely competent advanced life support (ALS) interventions by nursing staff can influence patient outcomes. Ongoing ALS education influences maintenance of competency and avoids skill decay. To explore the methods of ALS education delivery for nurses in the workplace; describe the issues relating to maintaining ALS competency; explore ALS competency decay for nurses and develop recommendations for the provision of continuing ALS education. A qualitative exploratory design was used to study ALS education provision in the workplace. Data were collected from ALS nurse experts in Western Australia by face-to-face and phone interviews. Semi-structured interviews were conducted and organised around a set of predetermined questions. Two major themes were identified; the first theme Demand and Supply describes the increasing demand for ALS education for nurses and the challenges with providing timely cost effective traditional face-to-face ALS education. The second theme, Choosing The Best Education Options describes new ways to provide ALS education using emerging technologies. The study suggested that using e-learning methods would assist with educating the maximum amount of nurses in a timely manner and e-learning and teleconferencing offer opportunities to reach nurses in distant locations. Delivering ALS education more frequently than annually would increase skills maintenance and lessen skill decay. Further research is required to explore which blended e-learning model is best suited to ALS education. Copyright © 2014 Elsevier Ltd. All rights reserved.

  3. Processing and characterization of Al-Al3Nb prepared by mechanical alloying and equal channel angular pressing

    NASA Astrophysics Data System (ADS)

    Chandran, P.; Zafari, A.; Lui, E. W.; Xia, K.

    2017-05-01

    Mechanically alloyed Al with immiscible elements such as Nb can lead to a uniform distribution of nanoscaled precipitates which are highly stable compared to conventional alloying and with excellent interface, resulting in significant increase in strength without problems associated with nano ceramic particles in metal matrix composites. Although immiscible, Nb can be alloyed with Al through mechanical milling, forming trialuminide (Al3Nb), either directly or upon subsequent precipitation, which possesses high strength, stiffness and stability at elevated temperatures. In the present study, Al-5 at.% Nb supersaturated solid solution was achieved after prolonged ball milling and nano Al3Nb precipitates were formed during subsequent ageing at 530°C. The Al-Al3Nb powder was consolidated by equal channel angular pressing (ECAP) at 400°C, resulting in a fully dense material with a uniform distribution of nanoscaled Al3Nb precipitates in the Al matrix.

  4. Deformation mechanisms of nanotwinned Al

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zhang, Xinghang

    The objective of this project is to investigate the role of different types of layer interfaces on the formation of high density stacking fault (SF) in Al in Al/fcc multilayers, and understand the corresponding deformation mechanisms of the films. Stacking faults or twins can be intentionally introduced (via growth) into certain fcc metals with low stacking fault energy (such as Cu, Ag and 330 stainless steels) to achieve high strength, high ductility, superior thermal stability and good electrical conductivity. However it is still a major challenge to synthesize these types of defects into metals with high stacking fault energy, suchmore » as Al. Although deformation twins have been observed in some nanocrystalline Al powders by low temperature, high strain rate cryomilling or in Al at the edge of crack tip or indentation (with the assistance of high stress intensity factor), these deformation techniques typically introduce twins sporadically and the control of deformation twin density in Al is still not feasible. This project is designed to test the following hypotheses: (1) Certain type of layer interfaces may assist the formation of SF in Al, (2) Al with high density SF may have deformation mechanisms drastically different from those of coarse-grained Al and nanotwinned Cu. To test these hypotheses, we have performed the following tasks: (i) Investigate the influence of layer interfaces, stresses and deposition parameters on the formation and density of SF in Al. (ii) Understand the role of SF on the deformation behavior of Al. In situ nanoindentation experiments will be performed to probe deformation mechanisms in Al. The major findings related to the formation mechanism of twins and mechanical behavior of nanotwinned metals include the followings: 1) Our studies show that nanotwins can be introduced into metals with high stacking fault energy, in drastic contrast to the general anticipation. 2) We show two strategies that can effectively introduce growth

  5. Study on Microstructure and Mechanical Properties of Hypereutectic Al-18Si Alloy Modified with Al-3B.

    PubMed

    Gong, Chunjie; Tu, Hao; Wu, Changjun; Wang, Jianhua; Su, Xuping

    2018-03-20

    An hypereutectic Al-18Si alloy was modified via an Al-3B master alloy. The effect of the added Al-3B and the modification temperature on the microstructure, tensile fracture morphologies, and mechanical properties of the alloy were investigated using an optical microscope, Image-Pro Plus 6.0, a scanning electron microscope, and a universal testing machine. The results show that the size of the primary Si and its fraction decreased at first, and then increased as an additional amount of Al-3B was added. When the added Al-3B reached 0.2 wt %, the fraction of the primary Si in the Al-18Si alloy decreased with an increase in temperature. Compared with the unmodified Al-18Si alloy, the tensile strength and elongation of the alloy modified at 850 °C with 0.2 wt % Al-3B increased by 25% and 81%, respectively. The tensile fracture of the modified Al-18Si alloy exhibited partial ductile fracture characteristics, but there were more areas with ductile characteristics compared with that of the unmodified Al-18Si alloy.

  6. Electron Trap Energy Distribution in ALD Al2O3, LaAl4Ox, and GdyAl2-yO3 Layers on Silicon

    NASA Astrophysics Data System (ADS)

    Wang, W. C.; Badylevich, M.; Adelmann, C.; Swerts, J.; Kittl, J. A.; Afanas'ev, V. V.

    2012-12-01

    The energy distribution of electron trap density in atomic layer deposited Al2O3, LaAl4Ox and GdyAl2-yO3 insulating layers was studied by using the exhaustive photodepopulation spectroscopy. Upon filling the traps by electron tunneling from Si substrate, a broad energy distribution of trap levels in the energy range 2-4 eV is found in all studied insulators with trap densities in the range of 1012 cm-2eV-1. The incorporation of La and Gd cations reduces the trap density in aluminate layers as compared to Al2O3. Crystallization of the insulator by the post-deposition annealing is found to increase the trap density while the energy distribution remains unchanged. The similar trap spectra in the Al2O3 and La or Gd aluminate layers suggest the common nature of the traps, probably originating from imperfections in the AlOx sub-network.

  7. Al-Si-Cu/TiN multilayer interconnection and Al-Ge reflow sputtering technologies for quarter-micron devices

    NASA Astrophysics Data System (ADS)

    Kikkawa, Takamaro; Kikuta, Kuniko

    1993-05-01

    Issues of interconnection technologies for quarter-micron devices are the reliability of metal lines with quarter-micron feature sizes and the formation of contact-hole-plugs with high aspect ratios. This paper describes a TiN/Al-Si-Cu/TiN/Al-Si-Cu/TiN/Ti multilayer conductor structure as a quarter-micron interconnection technology and aluminum-germanium (Al-Ge) reflow sputtering as a contact-hole filling technology. The TiN/Al-Si-Cu/TiN/Al-Si-Cu/TiN/Ti multilayer conductor structure could suppress stress-induced voiding and improve the electromigration mean-time to failure. These improvements are attributed to the fact that the grain boundaries for the Al-Si-Cu film and the interfaces between the Al-Si-Cu and the TiN films are strengthened by the rigid intermetallic compound, TiAl3. The Al-Ge alloy reflow sputtering is a candidate for contact- and via-hole filling technologies in terms of reducing fabrication costs. The Al-Ge reflow sputtering achieved low temperature contact hole filling at 300 degree(s)C. Contact holes with a diameter of 0.25 micrometers and aspect ratio of 4 could be filled. This is attributed to the low eutectic temperature for Al-Ge (424 degree(s)C) and the effect of thin polysilicon underlayer on the enhancement of Al-Ge reflow.

  8. Electrical conductivity optimization of the Na3AlF6-Al2O3-Sm2O3 molten salts system for Al-Sm intermediate binary alloy production

    NASA Astrophysics Data System (ADS)

    Liao, Chun-fa; Jiao, Yun-fen; Wang, Xu; Cai, Bo-qing; Sun, Qiang-chao; Tang, Hao

    2017-09-01

    Metal Sm has been widely used in making Al-Sm magnet alloy materials. Conventional distillation technology to produce Sm has the disadvantages of low productivity, high costs, and pollution generation. The objective of this study was to develop a molten salt electrolyte system to produce Al-Sm alloy directly, with focus on the electrical conductivity and optimal operating conditions to minimize the energy consumption. The continuously varying cell constant (CVCC) technique was used to measure the conductivity for the Na3AlF6-AlF3-LiF-MgF2-Al2O3-Sm2O3 electrolysis medium in the temperature range from 905 to 1055°C. The temperature ( t) and the addition of Al2O3 ( W(Al2O3)), Sm2O3 ( W(Sm2O3)), and a combination of Al2O3 and Sm2O3 into the basic fluoride system were examined with respect to their effects on the conductivity ( κ) and activation energy. The experimental results showed that the molten electrolyte conductivity increases with increasing temperature ( t) and decreases with the addition of Al2O3 or Sm2O3 or both. We concluded that the optimal operation conditions for Al-Sm intermediate alloy production in the Na3AlF6-AlF3-LiF-MgF2-Al2O3-Sm2O3 system are W(Al2O3) + W(Sm2O3) = 3wt%, W(Al2O3): W(Sm2O3) = 7:3, and a temperature of 965 to 995°C, which results in satisfactory conductivity, low fluoride evaporation losses, and low energy consumption.

  9. Characterization of Al/crystallized Al-based metallic glass composites produced by repeated roll bonding process

    NASA Astrophysics Data System (ADS)

    Alizadeh, Morteza; Khoramkhorshid, Saba; Taghvaei, Amir Hossein; Gokuldoss, Prashanth Konda

    2017-07-01

    Devitrified Al84Gd6Ni7Co3 glassy particles have been used to reinforce Al-matrix composites through repeated roll bonding (RRB) process. Microstructural characterization of the produced composites after various rolling cycles was performed by scanning electron microscopy. Mechanical properties of the fabricated composites were evaluated by the tensile and microhardness tests. The results indicate that the RRB process is successful to produce composites with the negligible amount of flaws and porosity, and it is followed by homogeneous distribution of Al84Gd6Ni7Co3 particles in the Al matrix after nine rolling passes. Elongation of the composites improves significantly upon RRB cycles and the tensile strength and microhardness of them increase more than two times compared to unreinforced Al. According to fractography results, the enhanced mechanical properties are correlated with formation of excellent bonding at the interface of Al84Gd6Ni7Co3 particles and Al matrix. The theoretical values of composites hardness and yield strength calculated based on iso-strain model show a good agreement with respect to the experimental results.

  10. Inductively coupled BCl 3/Cl 2 /Ar plasma etching of Al-rich AlGaN

    DOE PAGES

    Douglas, Erica A.; Sanchez, Carlos A.; Kaplar, Robert J.; ...

    2016-12-01

    Varying atomic ratios in compound semiconductors is well known to have large effects on the etching properties of the material. The use of thin device barrier layers, down to 25 nm, adds to the fabrication complexity by requiring precise control over etch rates and surface morphology. The effects of bias power and gas ratio of BCl 3 to Cl 2 for inductively coupled plasma etching of high Al content AlGaN were contrasted with AlN in this study for etch rate, selectivity, and surface morphology. Etch rates were greatly affected by both bias power and gas chemistry. Here we detail themore » effects of small variations in Al composition for AlGaN and show substantial changes in etch rate with regards to bias power as compared to AlN.« less

  11. Potential skin involvement in ALS: revisiting Charcot's observation - a review of skin abnormalities in ALS.

    PubMed

    Paré, Bastien; Gros-Louis, François

    2017-07-26

    Amyotrophic lateral sclerosis (ALS) is a neurodegenerative disease affecting motor neurons of the brain and spinal cord, leading to progressive paralysis and death. Interestingly, many skin changes have been reported in ALS patients, but never as yet fully explained. These observations could be due to the common embryonic origin of the skin and neural tissue known as the ectodermal germ layer. Following the first observation in ALS patients' skin by Dr Charcot in the 19th century, in the absence of bedsores unlike other bedridden patients, other morphological and molecular changes have been observed. Thus, the skin could be of interest in the study of ALS and other neurodegenerative diseases. This review summarizes skin changes reported in the literature over the years and discusses about a novel in vitro ALS tissue-engineered skin model, derived from patients, for the study of ALS.

  12. Unveiling the Semicoherent Interface with Definite Orientation Relationships between Reinforcements and Matrix in Novel Al3BC/Al Composites.

    PubMed

    Zhao, Yongfeng; Qian, Zhao; Ma, Xia; Chen, Houwen; Gao, Tong; Wu, Yuying; Liu, Xiangfa

    2016-10-05

    High-strength lightweight Al-based composites are promising materials for a wide range of applications. To provide high performance, a strong bonding interface for effective load transfer from the matrix to the reinforcement is essential. In this work, the novel Al 3 BC reinforced Al composites have been in situ fabricated through a liquid-solid reaction method and the bonding interface between Al 3 BC and Al matrix has been unveiled. The HRTEM characterizations on the Al 3 BC/Al interface verify it to be a semicoherent bonding structure with definite orientation relationships: (0001) Al 3 BC //(11̅1) Al ;[112̅0] Al 3 BC //[011] Al . Periodic arrays of geometrical misfit dislocations are also observed along the interface at each (0001) Al 3 BC plane or every five (11̅1) Al planes. This kind of interface between the reinforcement and the matrix is strong enough for effective load transfer, which would lead to the evidently improved strength and stiffness of the introduced new Al 3 BC/Al composites.

  13. 27Al-NMR studies of the structural phase transition in LaPd2Al2

    NASA Astrophysics Data System (ADS)

    Aoyama, Taisuke; Kobayashi, Fumiaki; Kotegawa, Hisashi; Tou, Hideki; Doležal, Petr; Kriegner, Dominik; Javorský, Pavel; Uhlířová, Klára

    2018-05-01

    We performed 27Al-NMR measurements for the CaBe2Ge2 type single crystalline LaPd2Al2 in the temperature range from 100 K to 5 K to investigate the origin of the structural phase transition. We found that the line profile of the 27Al-NMR spectrum does not change entirely on passing through the structural phase transition at Tst. Meanwhile, the peak position of the central line slightly change (≈ 30 ppm) below 70 K, suggesting the orbital shift changes below Tst. The present 27Al-NMR studies evidence that the local electronic state at Al site is hardly affected by the structural phase transition.

  14. [Levels of dissatisfaction of external users of the Instituto Nacional de Salud del Niño (National Institute of Child Health) in Lima, Peru].

    PubMed

    Shimabuku, Roberto; Huicho, Luis; Fernández, Danitza; Nakachi, Graciela; Maldonado, Ruth; Barrientos, Armando

    2012-01-01

    To determine the changes in the levels of dissatisfaction of the external users of the Instituto Nacional de Salud del Niño, in Lima, Peru. Observational study based on a software to evaluate surveys completed by health care users (Software de Evaluación de Encuestas de Usuarios en Salud - SEEUS). The population consisted of every person accompanying external users to outpatient visits, inpatient visits or emergency treatment in the years 2008, 2009 and 2010. To calculate the sample size, last year's proportion of users dissatisfied with each service was used, with an estimated error of 5% at a 95% confidence level. A sample of 2051 people was obtained, which revealed a decreasing trend in the levels of dissatisfaction with outpatient visits, and an increased dissatisfaction in the medical capabilities dimension for hospitalization and emergency services. In addition, a dissatisfaction index lower than 0.20 was registered in the medical capabilities dimension for outpatient visits. In contrast, the highest dissatisfaction indexes were registered in the hygiene dimension for 2009 (0.25) and 2010 (0.25), and in the others dimension for emergency services in 2009 (0.25). The dimensions showing an increase in the dissatisfaction index were tangible aspects, hygiene and others for hospitalization and emergency services. On the other hand, the medical capabilities dimension for outpatient visits showed a decrease in the level of dissatisfaction over the evaluated period.

  15. Al-Cu-Li and Al-Mg-Li alloys: Phase composition, texture, and anisotropy of mechanical properties (Review)

    NASA Astrophysics Data System (ADS)

    Betsofen, S. Ya.; Antipov, V. V.; Knyazev, M. I.

    2016-04-01

    The results of studying the phase transformations, the texture formation, and the anisotropy of the mechanical properties in Al-Cu-Li and Al-Mg-Li alloys are generalized. A technique and equations are developed to calculate the amounts of the S1 (Al2MgLi), T1 (Al2CuLi), and δ' (Al3Li) phases. The fraction of the δ' phase in Al-Cu-Li alloys is shown to be significantly higher than in Al-Mg-Li alloys. Therefore, the role of the T1 phase in the hardening of Al-Cu-Li alloys is thought to be overestimated, especially in alloys with more than 1.5% Li. A new model is proposed to describe the hardening of Al-Cu-Li alloys upon aging, and the results obtained with this model agree well with the experimental data. A texture, which is analogous to that in aluminum alloys, is shown to form in sheets semiproducts made of Al-Cu-Li and Al-Mg-Li alloys. The more pronounced anisotropy of the properties of lithium-containing aluminum alloys is caused by a significant fraction of the ordered coherent δ' phase, the deformation mechanism in which differs radically from that in the solid solution.

  16. TUBERCULOSIS COMO ENFERMEDAD OCUPACIONAL

    PubMed Central

    Mendoza-Ticona, Alberto

    2014-01-01

    Existe evidencia suficiente para declarar a la tuberculosis como enfermedad ocupacional en diversos profesionales especialmente entre los trabajadores de salud. En el Perú están normados y reglamentados los derechos laborales inherentes a la tuberculosis como enfermedad ocupacional, como la cobertura por discapacidad temporal o permanente. Sin embargo, estos derechos aún no han sido suficientemente socializados. En este trabajo se presenta información sobre el riesgo de adquirir tuberculosis en el lugar de trabajo, se revisan las evidencias para declarar a la tuberculosis como enfermedad ocupacional en trabajadores de salud y se presenta la legislación peruana vigente al respecto. PMID:22858771

  17. effect of the parameters of AlN/GaN/AlGaN and AlN/GaN/InAlN heterostructures with a two-dimensional electron gas on their electrical properties and the characteristics of transistors on their basis

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Tsatsulnikov, A. F., E-mail: andrew@beam.ioffe.ru; Lundin, V. W.; Zavarin, E. E.

    The effect of the layer thickness and composition in AlGaN/AlN/GaN and InAlN/AlN/GaN transistor heterostructures with a two-dimensional electron gas on their electrical and the static parameters of test transistors fabricated from such heterostructures are experimentally and theoretically studied. It is shown that the use of an InAlN barrier layer instead of AlGaN results in a more than twofold increase in the carrier concentration in the channel, which leads to a corresponding increase in the saturation current. In situ dielectric-coating deposition on the InAlN/AlN/GaN heterostructure surface during growth process allows an increase in the maximum saturation current and breakdown voltages whilemore » retaining high transconductance.« less

  18. Hot-electron real-space transfer and longitudinal transport in dual AlGaN/AlN/{AlGaN/GaN} channels

    NASA Astrophysics Data System (ADS)

    Šermukšnis, E.; Liberis, J.; Matulionis, A.; Avrutin, V.; Ferreyra, R.; Özgür, Ü.; Morkoç, H.

    2015-03-01

    Real-space transfer of hot electrons is studied in dual-channel GaN-based heterostructure operated at or near plasmon-optical phonon resonance in order to attain a high electron drift velocity at high current densities. For this study, pulsed electric field is applied in the channel plane of a nominally undoped Al0.3Ga0.7N/AlN/{Al0.15Ga0.85N/GaN} structure with a composite channel of Al0.15Ga0.85N/GaN, where the electrons with a sheet density of 1.4 × 1013 cm-2, estimated from the Hall effect measurements, are confined. The equilibrium electrons are situated predominantly in the Al0.15Ga0.85N layer as confirmed by capacitance-voltage experiment and Schrödinger-Poisson modelling. The main peak of the electron density per unit volume decreases as more electrons occupy the GaN layer at high electric fields. The associated decrease in the plasma frequency induces the plasmon-assisted decay of non-equilibrium optical phonons (hot phonons) confirmed by the decrease in the measured hot-phonon lifetime from 0.95 ps at low electric fields down below 200 fs at fields of E \\gt 4 kV cm-1 as the plasmon-optical phonon resonance is approached. The onset of real-space transfer is resolved from microwave noise measurements: this source of noise dominates for E \\gt 8 kV cm-1. In this range of fields, the longitudinal current exceeds the values measured for a mono channel reference Al0.3Ga0.7N/AlN/GaN structure. The results are explained in terms of the ultrafast decay of hot phonons and reduced alloy scattering caused by the real-space transfer in the composite channel.

  19. An AlN/Al 0.85Ga 0.15N high electron mobility transistor

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Baca, Albert G.; Armstrong, Andrew M.; Allerman, Andrew A.

    2016-07-22

    An AlN barrier high electron mobility transistor (HEMT) based on the AlN/Al 0.85Ga 0.15N heterostructure was grown, fabricated, and electrically characterized, thereby extending the range of Al composition and bandgap for AlGaN channel HEMTs. An etch and regrowth procedure was implemented for source and drain contact formation. A breakdown voltage of 810 V was achieved without a gate insulator or field plate. Excellent gate leakage characteristics enabled a high I on/I off current ratio greater than 10 7 and an excellent subthreshold slope of 75 mV/decade. A large Schottky barrier height of 1.74 eV contributed to these results. In conclusion,more » the room temperature voltage-dependent 3-terminal off-state drain current was adequately modeled with Frenkel-Poole emission.« less

  20. Unprecedented Al supersaturation in single-phase rock salt structure VAlN films by Al+ subplantation

    NASA Astrophysics Data System (ADS)

    Greczynski, G.; Mráz, S.; Hans, M.; Primetzhofer, D.; Lu, J.; Hultman, L.; Schneider, J. M.

    2017-05-01

    Modern applications of refractory ceramic thin films, predominantly as wear-protective coatings on cutting tools and on components utilized in automotive engines, require a combination of excellent mechanical properties, thermal stability, and oxidation resistance. Conventional design approaches for transition metal nitride coatings with improved thermal and chemical stability are based on alloying with Al. It is well known that the solubility of Al in NaCl-structure transition metal nitrides is limited. Hence, the great challenge is to increase the Al concentration substantially while avoiding precipitation of the thermodynamically favored wurtzite-AlN phase, which is detrimental to mechanical properties. Here, we use VAlN as a model system to illustrate a new concept for the synthesis of metastable single-phase NaCl-structure thin films with the Al content far beyond solubility limits obtained with conventional plasma processes. This supersaturation is achieved by separating the film-forming species in time and energy domains through synchronization of the 70-μs-long pulsed substrate bias with intense periodic fluxes of energetic Al+ metal ions during reactive hybrid high power impulse magnetron sputtering of the Al target and direct current magnetron sputtering of the V target in the Ar/N2 gas mixture. Hereby, Al is subplanted into the cubic VN grains formed by the continuous flux of low-energy V neutrals. We show that Al subplantation enables an unprecedented 42% increase in metastable Al solubility limit in V1-xAlxN, from x = 0.52 obtained with the conventional method to 0.75. The elastic modulus is 325 ± 5 GPa, in excellent agreement with density functional theory calculations, and approximately 50% higher than for corresponding films grown by dc magnetron sputtering. The extension of the presented strategy to other Al-ion-assisted vapor deposition methods or materials systems is straightforward, which opens up the way for producing supersaturated single

  1. Corrosion Studies of 2195 Al-Li Alloy and 2219 Al Alloy with Differing Surface Treatments

    NASA Technical Reports Server (NTRS)

    Danford, M. D.; Mendrek, M. J.

    1998-01-01

    Corrosion studies of 2195 Al-Li and 2219 Al alloys have been conducted using the scanning reference electrode technique (SRET) and the polarization resistance (PR) technique. The SRET was used to study corrosion mechanisms, while corrosion rate measurements were studied with the PR technique. Plates of Al203 blasted, soda blasted and conversion coated 2219 Al were coated with Deft primer and the corrosion rates studied with the EIS technique. Results from all of these studies are presented.

  2. Effect of Cooling Rate on Morphology of TiAl3 Particles in Al-4Ti Master Alloy.

    PubMed

    Zhao, Jianhua; Wang, Tao; Chen, Jing; Fu, Lu; He, Jiansheng

    2017-02-27

    The Al-4Ti master alloy was fabricated by aluminum (Al) and sponge titanium particle in a resistance furnace at different cooling rates. This work aims to investigate the relationship between the cooling rate and morphology of TiAl3. The microstructure and composition of master alloys at different cooling rates were characterized and analyzed by optical microscopy (OM), X-ray diffraction (XRD), differential scanning calorimetry (DSC), and SEM with energy dispersive spectroscopy (EDS). The results showed that various morphologies of TiAl3 particles in the Al-4Ti master alloy could be acquired at different cooling rates. Petal-like, blocky, and flake-like TiAl3 particles in the Al-4Ti master alloy were respectively acquired at the cooling rates of 3.36 K/s, 2.57 K/s, and 0.31 K/s. It was also found that the morphology of TiAl3 particles in the prepared master alloy changed from petal-like to blocky, then finally to flake-like, with the decrease of cooling rate. In addition, the morphology of the TiAl3 particles has no effect on the phase inversion temperature of Al-4Ti master alloy.

  3. Las mujeres saludables: reaching Latinas for breast, cervical and colorectal cancer prevention and screening.

    PubMed

    Larkey, Linda

    2006-02-01

    Community health advisors have effectively promoted breast and cervical cancer prevention and screening among low-income Latina women. Specific elements of such programs, such as enhanced social support, may explain successes. Promotion of colorectal cancer screening has been less studied. Promotoras de Salud (i.e., Latina health advisors) implemented a 12-week program among women recruited from community-based organizations. The program educated 366 Latinas in breast, cervical and colorectal cancer prevention and screening and emphasized social support among class members. Pre- and post-intervention assessments demonstrated significant increases for fruit and vegetable consumption (3.05 to 3.60 servings/day), and physical activity (65.15 to 122.40 minutes/week). Of women previously non-compliant, 39 percent, 31 percent and 4 percent received Pap tests, mammography, and fecal occult blood test (FOBT), respectively. A culturally aligned education program using community health advisors and emphasizing social support among participants may improve prevention and selected screening behaviors, but more intensive interventions may be required for colorectal cancer screening compliance.

  4. The structural and optical properties of high-Al-content AlInGaN epilayers grown by RF-MBE

    NASA Astrophysics Data System (ADS)

    Wang, Baozhu; An, Tao; Wen, Huanming; Wu, Ruihong; An, Shengbiao; Zhang, Xiuqing; Wang, Xiaoliang

    2008-11-01

    AlInGaN Quaternary Alloys were successfully grown on sapphire substrate by radio-frequency plasma-excited molecular beam epitaxy (RF-MBE). Different Al content AlInGaN quaternary alloys were acquired by changing the Al cell's temperature. The streaky RHEED pattern observed during AlInGaN growth showed the layer-by-layer growth mode. Rutherford back-scattering spectrometry (RBS), X-Ray diffraction (XRD) and Cathodoluminescence (CL) were used to characterize the structural and optical properties of the AlInGaN alloys. The experimental results show that the AlInGaN with appropriate Al cell's temperature, could acquire Al/In ratio near 4.7, then could acquire better crystal and optical quality. The samllest X-ray and CL full-width at half-maximum (FWHM) of the AlInGaN are 5arcmin and 25nm, respectivly. There are some cracks and V-defects occur in high-Al/In-ratio AlInGaN alloys. In the CL image, the cracks and V-defect regions are the emission-enhanced regions. The emission enhancement of the cracked and V-defect regions may be related to the In-segregation.

  5. Structures and stabilities of Al(n) (+), Al(n), and Al(n) (-) (n=13-34) clusters.

    PubMed

    Aguado, Andrés; López, José M

    2009-02-14

    Putative global minima of neutral (Al(n)) and singly charged (Al(n) (+) and Al(n) (-)) aluminum clusters with n=13-34 have been located from first-principles density functional theory structural optimizations. The calculations include spin polarization and employ the generalized gradient approximation of Perdew, Burke, and Ernzerhof to describe exchange-correlation electronic effects. Our results show that icosahedral growth dominates the structures of aluminum clusters for n=13-22. For n=23-34, there is a strong competition between decahedral structures, relaxed fragments of a fcc crystalline lattice (some of them including stacking faults), and hexagonal prismatic structures. For such small cluster sizes, there is no evidence yet for a clear establishment of the fcc atomic packing prevalent in bulk aluminum. The global minimum structure for a given number of atoms depends significantly on the cluster charge for most cluster sizes. An explicit comparison is made with previous theoretical results in the range n=13-30: for n=19, 22, 24, 25, 26, 29, 30 we locate a lower energy structure than previously reported. Sizes n=32, 33 are studied here for the first time by an ab initio technique.

  6. Optical microcavities and enhanced electroluminescence from electroformed Al-Al{sub 2}O{sub 3}-Ag diodes

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hickmott, T. W.

    Electroluminescence (EL) and electron emission into vacuum (EM) occur when a non-destructive dielectric breakdown of Al-Al{sub 2}O{sub 3}-Ag diodes, electroforming, results in the development of a filamentary region in which current-voltage (I-V) characteristics exhibit voltage-controlled negative resistance. The temperature dependence of I-V curves, EM, and, particularly, EL of Al-Al{sub 2}O{sub 3}-Ag diodes with anodic Al{sub 2}O{sub 3} thicknesses between 12 nm and 30 nm, has been studied. Two filters, a long-pass (LP) filter with transmission of photons with energies less than 3.0 eV and a short-pass (SP) filter with photon transmission between 3.0 and 4.0 eV, have been used to characterize EL. The voltagemore » threshold for EL with the LP filter, V{sub LP}, is ∼1.5 V. V{sub LP} is nearly independent of Al{sub 2}O{sub 3} thickness and of temperature and is 0.3–0.6 V less than the threshold voltage for EL for the SP filter, V{sub SP}. EL intensity is primarily between 1.8 and 3.0 eV when the bias voltage, V{sub S} ≲ 7 V. EL in the thinnest diodes is enhanced compared to EL in thicker diodes. For increasing V{sub S}, for diodes with the smallest Al{sub 2}O{sub 3} thicknesses, there is a maximum EL intensity, L{sub MX}, at a voltage, V{sub LMX}, followed by a decrease to a plateau. L{sub MX} and EL intensity at 4.0 V in the plateau region depend exponentially on Al{sub 2}O{sub 3} thickness. The ratio of L{sub MX} at 295 K for a diode with 12 nm of Al{sub 2}O{sub 3} to L{sub MX} for a diode with 25 nm of Al{sub 2}O{sub 3} is ∼140. The ratio of EL intensity with the LP filter to EL intensity with the SP filter, LP/SP, varies between ∼3 and ∼35; it depends on Al{sub 2}O{sub 3} thickness and V{sub S}. Enhanced EL is attributed to the increase of the spontaneous emission rate of a dipole in a non-resonant optical microcavity. EL photons interact with the Ag and Al films to create surface plasmon polaritons (SPPs) at the metal-Al

  7. Misfit paradox on nucleation potency of MgO and MgAl{sub 2}O{sub 4} for Al

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zhang, D.; Wang, L.

    MgO and MgAl{sub 2}O{sub 4} are believed to be effective heterogeneous nuclei for Al based alloys due to their small lattice misfits with Al. However, there is a strong evidence to suggest that liquid Al reacts with MgO and MgAl{sub 2}O{sub 4} phases but the heterogeneous nucleation behavior of such phases is rarely discussed. In order to identify the nucleation mechanism of Al, under the interference of the chemical reaction, the heterogeneous nucleation process is systematically investigated through thermal analysis and high resolution transmission electron microscopy (HRTEM). The observed multi-nucleation interfaces (Al/MgO, Al/MgAl{sub 2}O{sub 4} and Al/Al{sub 2}O{sub 3}) andmore » scattered experimental undercooling data indicate an independent multi-phase nucleation process in these systems. - Highlights: •Theoretical lattice misfit doesn’t always disclose nucleation potency. •The nucleation of liquid can be triggered by multi-nucleation interfaces. •An independent multi-agents nucleation was verified in the study.« less

  8. Microstructure and Properties of Fe3Al-Fe3AlC x Composite Prepared by Reactive Liquid Processing

    NASA Astrophysics Data System (ADS)

    Verona, Maria Nalu; Setti, Dalmarino; Paredes, Ramón Sigifredo Cortés

    2018-04-01

    A Fe3Al-Fe3AlC x composite was prepared using reactive liquid processing (RLP) through controlled mixture of carbon steel and aluminum in the liquid state. The microstructure and phases of the composite were assessed using X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, optical microscopy, and differential scanning calorimetry. In addition, the density, hardness, microhardness, and elastic modulus were evaluated. The Fe3Al-Fe3AlC x composite consisted of 65 vol pct Fe3Al and 35 vol pct Fe3AlC x ( κ). The κ phase contained 10.62 at. pct C, resulting in the stoichiometry Fe3AlC0.475. The elastic modulus of the Fe3Al-Fe3AlC0.475 composite followed the rule of mixtures. The RLP technique was shown to be capable of producing Fe3Al-Fe3AlC0.475 with a microstructure and properties similar to those achieved using other processing techniques reported in the literature.

  9. Studies of Al-Ti Alloys by SEM

    NASA Astrophysics Data System (ADS)

    Yildiz, K.; Atici, Y.; Keşlİ Oǧlu, K.; Yaşar, E.

    2007-04-01

    Al-Ti (1, 2 wt. %) alloys were investigated by Scanning Electron Microscopy (SEM). SEM observations and energy-dispersive x-ray analyses (EDX) showed that the phase structure of Al-Ti (1 %) alloy at 165 μm/s is composed of Al matrix and C, Ni, Fe and Si particles and the Al-Ti (1 %) alloys at 16 and 8 μm/s have only the Al matrix and C particles. It was also found that the Al-Ti (2 %) form the Al matrix and intermetallic TiAl.

  10. Initial Symptoms of ALS

    MedlinePlus

    ... Chapters Certified Centers and Clinics Support Groups About ALS About Us Our Research In Your Community Advocate ... Diagnosis En español Symptoms The initial symptoms of ALS can be quite varied in different people. One ...

  11. X-ray and optical crystallographic parameters investigations of high frequency induction melted Al-(alpha-Al(2)O(3)) alloys.

    PubMed

    Bourbia, A; Draissia, M; Bedboudi, H; Boulkhessaim, S; Debili, M Y

    2010-01-01

    This article deals with the microstructural strengthening mechanisms of aluminium by means of hard alpha-Al(2)O(3) alumina fine particles. A broad of understanding views covering materials preparations, elaboration process, characterization techniques and associated microstructural characteristic parameters measurements is given. In order to investigate the microstructural characteristic parameters and the mechanical strengthening mechanisms of pure aluminium by hard fine particles, a set of Al-(alpha-Al(2)O(3)) alloys samples were made under vacuum by high fusion temperature melting, the high frequency (HF) process, and rapidly solidified under ambient temperature from a mixture of cold-compacted high-pure fine Al and alpha-Al(2)O(3) powders. The as-solidified Al-(alpha-Al(2)O(3)) alloys were characterized by means of X-ray diffraction (XRD) analyses, optical microscopy observations and Vickers microhardness tests in both brut and heat-treated states. It was found that the as-solidified HF Al-(alpha-Al(2)O(3)) alloys with compositions below 4 wt.% (alpha-Al(2)O(3)) are single-phase microstructures of the solid solution FCC Al phase and over two-phase microstructures of the solid solution FCC Al and the Rhombohedral alpha-Al(2)O(3) phases. The optical micrographs reveal the presence of a grain size refinement in these alloys. Vickers microhardness of the as-solidified Al-(alpha-Al(2)O(3)) is increased by means of pure fine alpha-Al(2)O(3) alumina particles. These combined effects of strengthening and grain size refinement observed in the as-solidified Al-(alpha-Al(2)O(3)) alloys are essentially due to a strengthening of Al by the alpha-Al(2)O(3) alumina particles insertion in the (HF) melted and rapidly solidified alloys.

  12. Applications and non-idealities of submicron Al-AlOx-Nb tunnel junctions

    NASA Astrophysics Data System (ADS)

    Julin, J. K.; Maasilta, I. J.

    2016-10-01

    We have developed a technique to fabricate sub-micron, 0.6 μ {{m}}× 0.6 μ {{m}} Al-AlOx-Nb tunnel junctions using a standard e-beam resist, angle evaporation and double oxidation of the tunneling barrier, resulting in high quality niobium, as determined by the the high measured values of the critical temperature {T}{{C}}˜ 7.5 K and the gap {{Δ }}˜ 1.3 meV. The devices show great promise for local nanoscale thermometry in the temperature range 1-7.5 K. Electrical characterization of the junctions was performed at sub-Kelvin temperatures both with and without an external magnetic field, which was used to suppress superconductivity in Al and thus bring the junction into a normal-metal-insulator-superconductor configuration. We observed excess sub-gap current, which could not be explained by the standard tunneling theory. Evidence points towards materials science issues of the barrier or Nb/AlOx interface as the culprit.

  13. Spectra of surface plasmon polariton enhanced electroluminescence from electroformed Al-Al{sub 2}O{sub 3}-Ag diodes

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hickmott, T. W.

    Narrow band-pass filters have been used to measure the spectral distribution of electroluminescent photons with energies between 1.8 eV and 3.0 eV from electroformed Al-Al{sub 2}O{sub 3}-Ag diodes with anodic Al{sub 2}O{sub 3} thicknesses between 12 nm and 18 nm. Electroforming of metal-insulator-metal (MIM) diodes is a non-destructive dielectric breakdown that results in a conducting channel in the insulator and changes the initial high resistance of the MIM diode to a low resistance state. It is a critical step in the development of resistive-switching memories that utilize MIM diodes as the active element. Electroforming of Al-Al{sub 2}O{sub 3}-Ag diodes in vacuum results in voltage-controlledmore » negative resistance (VCNR) in the current-voltage (I-V) characteristics. Electroluminescence (EL) and electron emission into vacuum (EM) develop simultaneously with the current increase that results in VCNR in the I-V characteristics. EL is due to recombination of electrons injected at the Al-Al{sub 2}O{sub 3} interface with radiative defect centers in Al{sub 2}O{sub 3}. Measurements of EL photons between 1.8 eV and 3.0 eV using a wide band-pass filter showed that EL intensity is exponentially dependent on Al{sub 2}O{sub 3} thickness for Al-Al{sub 2}O{sub 3}-Ag diodes between 12 nm and 20 nm thick. Enhanced El intensity in the thinnest diodes is attributed to an increase in the spontaneous emission rate of recombination centers due to high electromagnetic fields generated in Al{sub 2}O{sub 3} when EL photons interact with electrons in Ag or Al to form surface plasmon polaritons at the Al{sub 2}O{sub 3}-Ag or Al{sub 2}O{sub 3}-Al interface. El intensity is a maximum at 2.0–2.2 eV for Al-Al{sub 2}O{sub 3}-Ag diodes with Al{sub 2}O{sub 3} thicknesses between 12 nm and 18 nm. EL in diodes with 12 nm or 14 nm of Al{sub 2}O{sub 3} is enhanced by factors of 8–10 over EL from a diode with 18 nm of Al{sub 2}O{sub 3}. The extent of EL

  14. Room temperature radiolytic synthesized Cu@CuAlO(2)-Al(2)O(3) nanoparticles.

    PubMed

    Abedini, Alam; Saion, Elias; Larki, Farhad; Zakaria, Azmi; Noroozi, Monir; Soltani, Nayereh

    2012-01-01

    Colloidal Cu@CuAlO(2)-Al(2)O(3) bimetallic nanoparticles were prepared by a gamma irradiation method in an aqueous system in the presence of polyvinyl pyrrolidone (PVP) and isopropanol respectively as a colloidal stabilizer and scavenger of hydrogen and hydroxyl radicals. The gamma irradiation was carried out in a (60)Co gamma source chamber with different doses up to 120 kGy. The formation of Cu@CuAlO(2)-Al(2)O(3) nanoparticles was observed initially by the change in color of the colloidal samples from colorless to brown. Fourier transform infrared spectroscopy (FTIR) confirmed the presence of bonds between polymer chains and the metal surface at all radiation doses. Results of transmission electron microscopy (TEM), energy dispersive X-ray spectrometry (EDX), and X-ray diffraction (XRD) showed that Cu@CuAlO(2)-Al(2)O(3) nanoparticles are in a core-shell structure. By controlling the absorbed dose and precursor concentration, nanoclusters with different particle sizes were obtained. The average particle diameter increased with increased precursor concentration and decreased with increased dose. This is due to the competition between nucleation, growth, and aggregation processes in the formation of nanoclusters during irradiation.

  15. Nuestra misión y lo que hacemos

    EPA Pesticide Factsheets

    La misión de la Agencia de Protección Ambiental de EE. UU. (EPA, por sus siglas en inglés) es proteger la salud humana y el medioambiente. Cuando el Congreso escribe una ley ambiental, nosotros la implementamos al escribir los reglamentos y las normas.

  16. A Comparison of the Behaviour of AlTiB and AlTiC Grain Refiners

    NASA Astrophysics Data System (ADS)

    Schneider, W.; Kearns, M. A.; McGarry, M. J.; Whitehead, A. J.

    AlTiC master alloys present a new alternative to AlTiB grain refiners which have enjoyed pre-eminence in cast houses for several decades. Recent investigations have shown that, under defined casting conditions, AlTiC is a more efficient grain refiner than AlTiB, is less prone to agglomeration and is more resistant to poisoning by Zr, Cr. Moreover it is observed that there are differences in the mechanism of grain refinement for the different alloys. This paper describes the influence of melt temperature and addition rate on the performance of both types of grain refiner in DC casting tests on different wrought alloys. Furthermore the effects of combined additions of the grain refiners and the recycling behaviour of the treated alloys are presented. Results are compared with laboratory test data. Finally, mechanisms of grain refinement are discussed which are consistent with the observed differences in behaviour with AlTiC and AlTiB.

  17. Room-Temperature Quantum Ballistic Transport in Monolithic Ultrascaled Al-Ge-Al Nanowire Heterostructures.

    PubMed

    Sistani, Masiar; Staudinger, Philipp; Greil, Johannes; Holzbauer, Martin; Detz, Hermann; Bertagnolli, Emmerich; Lugstein, Alois

    2017-08-09

    Conductance quantization at room temperature is a key requirement for the utilizing of ballistic transport for, e.g., high-performance, low-power dissipating transistors operating at the upper limit of "on"-state conductance or multivalued logic gates. So far, studying conductance quantization has been restricted to high-mobility materials at ultralow temperatures and requires sophisticated nanostructure formation techniques and precise lithography for contact formation. Utilizing a thermally induced exchange reaction between single-crystalline Ge nanowires and Al pads, we achieved monolithic Al-Ge-Al NW heterostructures with ultrasmall Ge segments contacted by self-aligned quasi one-dimensional crystalline Al leads. By integration in electrostatically modulated back-gated field-effect transistors, we demonstrate the first experimental observation of room temperature quantum ballistic transport in Ge, favorable for integration in complementary metal-oxide-semiconductor platform technology.

  18. Interfacial Characterization of Dissimilar Joints Between Al/Mg/Al-Trilayered Clad Sheet to High-Strength Low-Alloy Steel

    NASA Astrophysics Data System (ADS)

    Macwan, A.; Jiang, X. Q.; Chen, D. L.

    2015-07-01

    Magnesium (Mg) alloys are increasingly used in the automotive and aerospace sectors to reduce vehicle weight. Al/Mg/Al tri-layered clad sheets are deemed as a promising alternative to improve the corrosion resistance and formability of Mg alloys. The structural application of Al/Mg/Al tri-layered clad sheets inevitably involves welding and joining in the multi-material vehicle body manufacturing. This study aimed to characterize the bonding interface microstructure of the Al/Mg/Al-clad sheet to high-strength low-alloy steel with and without Zn coating using ultrasonic spot welding at different levels of welding energy. It was observed that the presence of Zn coating improved the bonding at the interface due to the formation of Al-Zn eutectic structure via enhanced diffusion. At a higher level of welding energy, characteristic flow patterns of Zn into Al-clad layer were observed with an extensive penetration mainly along some high angle grain boundaries. The dissimilar joints without Zn coating made at a high welding energy of 800 J failed partially from the Al/Fe weld interface and partially from the Al/Mg clad interface, while the joints with Zn coating failed from the Al/Mg clad interface due to the presence of brittle Al12Mg17 phase.

  19. The investigation of Al0.29Ga0.71N/GaN/AlN and AlN/GaN/AlN thin films grown on Si (111) by RF plasma-assisted MBE

    NASA Astrophysics Data System (ADS)

    Yusoff, Mohd Zaki Mohd; Mahyuddin, Azzafeerah; Hassan, Zainuriah; Hassan, Haslan Abu; Abdullah, Mat Johar

    2012-06-01

    Recently, gallium nitride (GaN) and its related compounds involving Al and In have attracted much attention because of their potential to be used as high-efficiency UV light emitting devices, and as high frequency and high power electronic devices. Consequently, the growth and physics of GaN-based materials have attracted remarkable scientific attention. In this work, the growth and characterization of epitaxial Al0.29Ga0.71N and AlN layers grown on Si (111) by RF-plasma assisted molecular beam epitaxy (MBE) are described. The Al mole fraction was derived from the HR-XRD symmetric rocking curve (RC) ω/2θ scans of (0002) plane as x = 0.29. For AlN/GaN/AlN sample, the maximum Raman intensity at 521.53 cm-1 is attributed to crystalline silicon. It was found that the allowed Raman optical phonon mode of GaN, the E1 (high) is clearly visible, which is located at 570.74 cm-1. Photoluminscence (PL) spectrums of both samples have shown sharp and intense band edge emission of GaN without the existence of yellow emission band, showing good crystal quality of the samples have been successfully grown on Si substrate.

  20. Effects of substituting ytterbium for scandium on the microstructure and properties of Al-Sc and Al-Mg-Sc alloys =

    NASA Astrophysics Data System (ADS)

    Tuan, Nguyen Quoc

    Al(Sc) alloys represent a new class of potential alloys for high performance structural applications. The excellent properties obtained from the combination of solid-solution hardening and precipitation hardening in Al-Mg-Sc alloys make these alloys very attractive to automotive, aerospace, and structural applications. However, the Sc high cost limits the applications and the addition of cheaper alloying elements that substitutes partially Sc are not only desirable but crucial. In order to reduce the cost of Sc-containing Al alloys and maintain their mechanical properties, the microstructure and mechanical properties of Al-Sc-Yb and Al-Mg-Sc-Yb alloys in comparison with Al-Sc and Al-Mg-Sc alloys were studied. The results showed the similarity of microstructure, hardness and aging behaviour of Al-0.24Sc-0.07Yb alloy in comparison with Al-0.28Sc alloy and Al-4 wt% Mg-0.3 wt% Sc alloy with Al-4 wt% Mg-0.24 wt% Sc-0.06 wt% Yb alloy. The approximately spheroidal Al3Sc and Al3(Sc,Yb) precipitates were uniformly distributed throughout the alpha-Al matrix. The precipitates remain fully coherent with alpha-Al matrix even after aging at high temperature for long time. In another aspect, the grain refinement in Al-Mg-Sc alloys with and without ultrasonic treatment at various pouring temperatures was investigated. The average grain size of Al-Mg-Sc alloy remarkably decreases by increasing the content of Mg or by adding 0.3 wt% of Sc. The pouring temperature has a strong effect on the microstructure of Al-1Mg-0.3Sc alloy. Lower pouring temperature leads to smaller grain size and more homogeneous microstructure. Ultrasonic vibration proved to be a potential grain refinement technique of Al-1Mg-0.3Sc. Significant grain refinement was obtained by applying ultrasonic treatment within the temperature range from 700 to 740 °C. The corrosion behaviour of Al-Sc, Al-Sc-Yb, Al-Mg, Al-Mg-Sc and Al-Mg-Sc-Yb alloys in 3.5 wt% NaCl solution was investigated by immersion and potentiodynamic

  1. Al-Shebab: An Al-Qaeda Affiliate Case Study (2Rev)

    DTIC Science & Technology

    2017-10-01

    explosives and car bombs . Al-Shebab’s joining Al-Qaeda had mutual benefits: AQ’s presence in East Africa dates to Osama Bin Laden’s time in Sudan...1992–1996) and the establishment of cells that perpetrated the August 7, 1998 bombings of the U.S. embassies in Nairobi, Kenya, and Dar es Salaam...to build an emirate in the Gedo region, but the project was crushed by Ethiopian forces after AIAI perpetrated several bombings in Ethiopia.25 The

  2. Nonequilibrium synthesis of NbAl3 and Nb-Al-V alloys by laser cladding. II - Oxidation behavior

    NASA Technical Reports Server (NTRS)

    Haasch, R. T.; Tewari, S. K.; Sircar, S.; Loxton, C. M.; Mazumder, J.

    1992-01-01

    Isothermal oxidation behaviors of NbAl3 alloy synthesized by laser cladding were investigated at temperatures between 800 and 1400 C, and the effect of vanadium microalloying on the oxidation of the laser-clad alloy was examined. The oxidation kinetics of the two alloys were monitored using thermal gravimetric weight gain data, and the bulk and surface chemistries were analyzed using XRD and XPS, respectively. It was found that NbAl3 did not form an exclusive layer of protective Al2O3. The oxidation products at 800 C were found to be a mixture of Nb2O5 and Al2O3. At 1200 C, a mixture of NbAlO4, Nb2O5, and Al2O3 formed; and at 1400 C, a mixture of NbAlO4, Al2O3, NbO2, NbO(2.432), and Nb2O5 formed. The addition of V led to a dramatic increase of the oxidation rate, which may be related to the formation of (Nb, V)2O5 and VO2, which grows in preference to protective Al2O3.

  3. Completing the Heterocubane Family [Cp*AlE]4 (E = O, S, Se, and Te) by Selective Oxygenation and Sulfuration of [Cp*Al]4: Density Functional Theory Calculations of [Cp*AlE]4 and Reactivity of [Cp*AlO]4 toward Hydrolysis.

    PubMed

    Stelzer, Adrian C; Hrobárik, Peter; Braun, Thomas; Kaupp, Martin; Braun-Cula, Beatrice

    2016-05-16

    The subvalent aluminum compound [Cp*Al]4 (1) reacts with dioxygen, N2O, or sulfur to yield the heterocubane complexes [Cp*AlX]4 [X = O (2) and S (3)]. Treatment of [Cp*AlO]4 (2) with (tBuO)3SiOH gave [(tBuO)3SiOAlO]4 (6) and Cp*H. The structures and spectroscopic data of the Al clusters are supported by density functional theory (DFT) calculations, which also demonstrate the importance of noncovalent interactions (NCI) in oligomeric Al(I) complexes as well as in [Cp*AlS]4 and the heavier homologues of Se and Te. The computed (27)Al NMR shifts indicate a deshielding at the Al centers with increasing electronegativity of the chalcogen atom as well as significant spin-orbit shielding effects within the heavier heterocubane [Al4E4] cores. Further hydrolysis of 6 with an additional amount of silanol in the presence of water resulted in the formation of [Al4(OH)6(OH2)2(OSiOtBu3)6] (7), which shows a structural motif found in boehmite and diaspore.

  4. Revisiting the Al/Al 2O 3 Interface: Coherent Interfaces and Misfit Accommodation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Pilania, Ghanshyam; Thijsse, Barend J.; Hoagland, Richard G.

    We report the coherent and semi-coherent Al/α-Al 2O 3 interfaces using molecular dynamics simulations with a mixed, metallic-ionic atomistic model. For the coherent interfaces, both Al-terminated and O-terminated nonstoichiometric interfaces have been studied and their relative stability has been established. To understand the misfit accommodation at the semi-coherent interface, a 1-dimensional (1D) misfit dislocation model and a 2-dimensional (2D) dislocation network model have been studied. For the latter case, our analysis reveals an interface dislocation structure with a network of three sets of parallel dislocations, each with pure-edge character, giving rise to a pattern of coherent and stacking-fault-like regions atmore » the interface. Structural relaxation at elevated temperatures leads to a further change of the dislocation pattern, which can be understood in terms of a competition between the stacking fault energy and the dislocation interaction energy at the interface. In conclusion, our results are expected to serve as an input for the subsequent dislocation dynamics models to understand and predict the macroscopic mechanical behavior of Al/α-Al 2O 3 composite heterostructures.« less

  5. Revisiting the Al/Al 2O 3 Interface: Coherent Interfaces and Misfit Accommodation

    DOE PAGES

    Pilania, Ghanshyam; Thijsse, Barend J.; Hoagland, Richard G.; ...

    2014-03-27

    We report the coherent and semi-coherent Al/α-Al 2O 3 interfaces using molecular dynamics simulations with a mixed, metallic-ionic atomistic model. For the coherent interfaces, both Al-terminated and O-terminated nonstoichiometric interfaces have been studied and their relative stability has been established. To understand the misfit accommodation at the semi-coherent interface, a 1-dimensional (1D) misfit dislocation model and a 2-dimensional (2D) dislocation network model have been studied. For the latter case, our analysis reveals an interface dislocation structure with a network of three sets of parallel dislocations, each with pure-edge character, giving rise to a pattern of coherent and stacking-fault-like regions atmore » the interface. Structural relaxation at elevated temperatures leads to a further change of the dislocation pattern, which can be understood in terms of a competition between the stacking fault energy and the dislocation interaction energy at the interface. In conclusion, our results are expected to serve as an input for the subsequent dislocation dynamics models to understand and predict the macroscopic mechanical behavior of Al/α-Al 2O 3 composite heterostructures.« less

  6. Application of Al-2La-1B Grain Refiner to Al-10Si-0.3Mg Casting Alloy

    NASA Astrophysics Data System (ADS)

    Jing, Lijun; Pan, Ye; Lu, Tao; Li, Chenlin; Pi, Jinhong; Sheng, Ningyue

    2018-05-01

    This paper reports the application and microstructure refining effect of an Al-2La-1B grain refiner in Al-10Si-0.3Mg casting alloy. Compared with the traditional Al-5Ti-1B refiner, Al-2La-1B refiner shows better performances on the grain refinement of Al-10Si-0.3Mg alloy. Transmission electron microscopy analysis suggests that the crystallite structure features of LaB6 are beneficial to the heterogeneous nucleation of α-Al grains. Regarding the mechanical performances, tensile properties of Al-10Si-0.3Mg casting alloy are prominently improved, due to the refined microstructures.

  7. Theoretical analysis of compatibility of several reinforcement materials with NiAl and FeAl matrices

    NASA Technical Reports Server (NTRS)

    Misra, Ajay K.

    1989-01-01

    Several potential reinforcement materials were assessed for their chemical, coefficient of thermal expansion (CTE), and mechanical compatibility with the intermetallic matrices based on NiAl and FeAl. Among the ceramic reinforcement materials, Al2O3, TiC, and TiB2, appear to be the optimum choices for NiAl and FeAl matrices. However, the problem of CTE mismatch with the matrix needs to be solved for these three reinforcement materials. Beryllium-rich intermetallic compounds can be considered as potential reinforcement materials provided suitable reaction barrier coatings can be developed for these. Based on preliminary thermodynamic calculations, Sc2O3 and TiC appear to be suitable as reaction barrier coatings for the beryllides. Several reaction barrier coatings are also suggested for the currently available SiC fibers.

  8. Low resistance ohmic contacts to n-GaN and n-AlGaN using NiAl

    NASA Astrophysics Data System (ADS)

    Ingerly, D. B.; Chen, Y.; William, R. S.; Takeuchi, T.; Chang, Y. A.

    2000-07-01

    The intermetallic compound NiAl (50:50 at. %) has been shown to be a low-resistance ohmic contact to n-GaN and n-AlGaN. NiAl contacts on n-GaN (n=2.5×1017cm-3) had a specific contact resistance of 9.4×10-6 Ω cm2 upon annealing at 850 °C for 5 min. NiAl contacts annealed at 900 °C for 5 min in n-Al0.12Ga0.88N (n=2.4×1018cm-3) and n-Al0.18Ga0.82N (n=2.7×1018cm-3) had specific contact resistances of 2.1×10-5 Ω cm2 and 4.7×10-5 Ω cm2, respectively. Additionally, these contacts were subjected to long-term annealing at 600 °C for 100 h. On n-GaN, the contact specific contact resistance degraded from 9.4×10-6 Ω cm2 to 5.3×10-5 Ω cm2 after the long-term anneal. Contacts to n-Al0.18Ga0.82N showed only slight degradation with a change in contact resistance, from 4.7×10-5 Ω cm2 to 9.2×10-5 Ω cm2. These results demonstrate the NiAl has great promise as a stable, low-resistance contact, particularly to n-AlGaN used in high-temperature applications.

  9. How well can wave runup be predicted? comment on Laudier et al. (2011) and Stockdon et al. (2006)

    USGS Publications Warehouse

    Plant, Nathaniel G.; Stockdon, Hilary F.

    2015-01-01

    Laudier et al. (2011) suggested that there may be a systematic bias error in runup predictions using a model developed by Stockdon et al. (2006). Laudier et al. tested cases that sampled beach and wave conditions that differed from those used to develop the Stockdon et al. model. Based on our re-analysis, we found that in two of the three Laudier et al. cases observed overtopping was actually consistent with the Stockdon et al. predictions. In these cases, the revised predictions indicated substantial overtopping with, in one case, a freeboard deficit of 1 m. In the third case, the revised prediction had a low likelihood of overtopping, which reflected a large uncertainty due to wave conditions that included a broad and bi-modal frequency distribution. The discrepancy between Laudier et al. results and our re-analysis appear to be due, in part, to simplifications made by Laudier et al. when they implemented a reduced version of the Stockdon et al. model.

  10. Room Temperature Radiolytic Synthesized Cu@CuAlO2-Al2O3 Nanoparticles

    PubMed Central

    Abedini, Alam; Saion, Elias; Larki, Farhad; Zakaria, Azmi; Noroozi, Monir; Soltani, Nayereh

    2012-01-01

    Colloidal Cu@CuAlO2-Al2O3 bimetallic nanoparticles were prepared by a gamma irradiation method in an aqueous system in the presence of polyvinyl pyrrolidone (PVP) and isopropanol respectively as a colloidal stabilizer and scavenger of hydrogen and hydroxyl radicals. The gamma irradiation was carried out in a 60Co gamma source chamber with different doses up to 120 kGy. The formation of Cu@CuAlO2-Al2O3 nanoparticles was observed initially by the change in color of the colloidal samples from colorless to brown. Fourier transform infrared spectroscopy (FTIR) confirmed the presence of bonds between polymer chains and the metal surface at all radiation doses. Results of transmission electron microscopy (TEM), energy dispersive X-ray spectrometry (EDX), and X-ray diffraction (XRD) showed that Cu@CuAlO2-Al2O3 nanoparticles are in a core-shell structure. By controlling the absorbed dose and precursor concentration, nanoclusters with different particle sizes were obtained. The average particle diameter increased with increased precursor concentration and decreased with increased dose. This is due to the competition between nucleation, growth, and aggregation processes in the formation of nanoclusters during irradiation. PMID:23109893

  11. Structure of Li5AlS4 and comparison with other lithium-containing metal sulfides

    NASA Astrophysics Data System (ADS)

    Lim, Hanjin; Kim, Sung-Chul; Kim, Jaegyeom; Kim, Young-Il; Kim, Seung-Joo

    2018-01-01

    Lithium aluminum sulfide (Li5AlS4) was synthesized by solid state reaction, and its crystal structure was characterized by ab initio structure determination on the basis of powder neutron diffraction (ND) data. Li5AlS4 was found to have monoclinic unit cell (space group, P21/m) with the lattice parameters: a = 6.8583(4) Å, b = 7.8369(4) Å, c = 6.2488(4) Å, and β = 90.333(4)°. This structure is built from a hexagonal close-packed (hcp) arrangement of sulfur atoms with a stacking sequence of …ABAB…. The hcp sulfide lattice consists of two different double-sulfide layers alternately stacked along the c-axis. Between the first pair of sulfur layers all the tetrahedral interstices (T+ and T- sites) are filled with lithium and aluminum atoms. All octahedral interstices between the second pair of sulfur layers are occupied by the remaining lithium atoms. The structure of Li5AlS4 is compared with those of various lithium-containing metal sulfides like Li2FeS2, NaLiMS2 (M = Zn, Cd), Li4GeS4, LiM‧S2 (M‧ = Al, Ga, In) and γ-Li3PS4. Each sulfide represents a specific distribution of lithium atoms in the lattice depending on how the octahedral and tetrahedral interstitial sites are filled. The low ionic conductivity of Li5AlS4 (9.7 × 10-9 S cm-1 at 323 K) relative to other sulfides may be due to the highly-ordered distribution of the lithium atoms in the layered structure and the lack of adjacent void spaces that can be used for lithium ion hopping.

  12. Investigation on Tribological Properties of the Pre-oxidized Ti2AlN/TiAl Composite

    NASA Astrophysics Data System (ADS)

    Wang, Daqun; Sun, Dongli; Han, Xiuli; Wang, Qing; Wang, Guangwei

    2018-03-01

    Different oxidation layers on the Ti2AlN/TiAl substrate which was fabricated by in situ synthesis were prepared through thermal oxidation process. The microstructure, phase identification and elements distribution of the oxidation layers were analyzed. The tribological performance of pre-oxidized composites against Si3N4 ball at 25 and 600 °C, as well as the effect of pre-oxidation layers on tribological performance was systematically investigated. The results show that, compared to Ti2AlN/TiAl, the pre-oxidized composites present more excellent tribological properties, especially the wear resistance at 600 °C. It is a significant finding that, different from severe abrasive wear and plastic deformation of Ti2AlN/TiAl, the tribo-films formed by the pre-oxidation layers on the worn surface of pre-oxidized composites weaken abrasive wear and suppress the development of plastic deformation to protect the underlying composite substrate from wear. Moreover, the stable cooperation on the interface between tribo-films and Si3N4 ball results in the relatively steady friction coefficient.

  13. Luminescence of delafossite-type CuAlO2 fibers with Eu substitution for Al cations

    PubMed Central

    Liu, Yin; Gong, Yuxuan; Mellott, Nathan P.; Wang, Bu; Ye, Haitao; Wu, Yiquan

    2016-01-01

    Abstract CuAlO2 has been examined as a potential luminescent material by substituting Eu for Al cations in the delafossite structure. CuAlO2:Eu3+ nanofibers have been prepared via electrospinning for the ease of mitigating synthesis requirements and for future optoelectronics and emerging applications. Single-phase CuAlO2 fibers could be obtained at a temperature of 1100 °C in air. The Eu was successfully doped in the delafossite structure and two strong emission bands at ~405 and 610 nm were observed in the photoluminescence spectra. These bands are due to the intrinsic near-band-edge transition of CuAlO2 and the f-f transition of the Eu3+ activator, respectively. Further electrical characterization indicated that these fibers exhibit semiconducting behavior and the introduction of Eu could act as band-edge modifiers, thus changing the thermal activation energies. In light of this study, CuAlO2:Eu3+ fibers with both strong photoluminescence and p-type conductivity could be produced by tailoring the rare earth doping concentrations. PMID:27877870

  14. Luminescence of delafossite-type CuAlO2 fibers with Eu substitution for Al cations

    NASA Astrophysics Data System (ADS)

    Liu, Yin; Gong, Yuxuan; Mellott, Nathan P.; Wang, Bu; Ye, Haitao; Wu, Yiquan

    2016-01-01

    CuAlO2 has been examined as a potential luminescent material by substituting Eu for Al cations in the delafossite structure. CuAlO2:Eu3+ nanofibers have been prepared via electrospinning for the ease of mitigating synthesis requirements and for future optoelectronics and emerging applications. Single-phase CuAlO2 fibers could be obtained at a temperature of 1100 °C in air. The Eu was successfully doped in the delafossite structure and two strong emission bands at 405 and 610 nm were observed in the photoluminescence spectra. These bands are due to the intrinsic near-band-edge transition of CuAlO2 and the f-f transition of the Eu3+ activator, respectively. Further electrical characterization indicated that these fibers exhibit semiconducting behavior and the introduction of Eu could act as band-edge modifiers, thus changing the thermal activation energies. In light of this study, CuAlO2:Eu3+ fibers with both strong photoluminescence and p-type conductivity could be produced by tailoring the rare earth doping concentrations.

  15. Luminescence of delafossite-type CuAlO2 fibers with Eu substitution for Al cations.

    PubMed

    Liu, Yin; Gong, Yuxuan; Mellott, Nathan P; Wang, Bu; Ye, Haitao; Wu, Yiquan

    2016-01-01

    CuAlO 2 has been examined as a potential luminescent material by substituting Eu for Al cations in the delafossite structure. CuAlO 2 :Eu 3+ nanofibers have been prepared via electrospinning for the ease of mitigating synthesis requirements and for future optoelectronics and emerging applications. Single-phase CuAlO 2 fibers could be obtained at a temperature of 1100 °C in air. The Eu was successfully doped in the delafossite structure and two strong emission bands at ~405 and 610 nm were observed in the photoluminescence spectra. These bands are due to the intrinsic near-band-edge transition of CuAlO 2 and the f-f transition of the Eu 3+ activator, respectively. Further electrical characterization indicated that these fibers exhibit semiconducting behavior and the introduction of Eu could act as band-edge modifiers, thus changing the thermal activation energies. In light of this study, CuAlO 2 :Eu 3+ fibers with both strong photoluminescence and p-type conductivity could be produced by tailoring the rare earth doping concentrations.

  16. Al-Qaeda in Iraq (AQI): An Al-Qaeda Affiliate Case Study

    DTIC Science & Technology

    2017-10-01

    a comparative methodology that included eight case studies on groups affiliated or associated with Al-Qaeda. These case studies were then used as a... methodology that included eight case studies on groups affiliated or associated with Al-Qaeda. These case studies were then used as a dataset for cross...Case Study Zack Gold With contributions from Pamela G. Faber October 2017 This work was performed under Federal Government

  17. RETRACTED ARTICLE: Microstructure of carbide precipitates in L12-Ni3Al and L10-TiAl

    NASA Astrophysics Data System (ADS)

    Han, Chang Suk

    2008-04-01

    The crystallographic structures of carbide formed in Ni3Al- and TiAl-based intermetallics containing carbon are investigated in this study using transmission electron microscopy. In an L12-ordered Ni3Al alloy with 4 mol.% of chromium and 0.2 mol.% to 3.0 mol.% of carbon, fine octahedral precipitates of M23C6 type carbide were formed in the matrix by aging at temperatures around 973 K after solution annealing at 1423 K. TEM examination revealed that the M23C6 phase and the matrix lattices have a cube-cube orientation relationship and maintain partial atomic matching at the {111} interface. After prolonged aging or by aging at higher temperatures, the M23C6 precipitates adopt a rod-like morphology elongated parallel to the <100> directions. In L10-ordered TiAl containing from 0.1 mol.% to 2.0 mol.% carbon, TEM observations reveal that needle-like precipitates, which lie only in one direction parallel to the [001] axis of the L10 matrix appear in the matrix mainly at dislocations. Selected-area electron diffraction (SAED) patterns analyses showed that the needle-shaped precipitate is perovskite-type Ti3AlC. The orientation relationship between the Ti3AlC and the L10 matrix was found to be (001)Ti3AlC//(001)L10 matrix and [010]Ti3AlC//[010]L10 matrix. By aging at higher temperatures or for a longer period at 1073 K, plate-like precipitates of Ti2AlC with a hexagonal structure form on the {111} planes of the L10 matrix. The orientation relationship between the Ti2AlC and the L10 matrix is (0001)Ti2AlC//(111)L10 matrix and Ti2AlC//L10 matrix.

  18. Structure and Mechanical Properties of CrTiAlN/TiAlN Composite Coatings Deposited by Multi-Arc Ion Plating

    NASA Astrophysics Data System (ADS)

    Yan, Shaojian; Tian, Canxin; Huang, Zhihong; Yang, Bing; Fu, Dejun

    2014-10-01

    CrTiAlN/TiAlN composite coatings were deposited on cemented carbide by using a home-made industrial scale multi-arc ion plating system. The samples were studied by X-ray diffraction, scanning electron microscopy (SEM), microhardness and ball-on-disk testing. The properties of the CrTiAlN/TiAlN coatings were significantly influenced by the microstructure and the deposition time ratio of TiAlN over CrTiAlN layers. With the increase of deposition time ratio, the microhardness of CrTiAlN/TiAlN increased from 28.6 GPa to 37.5 GPa, much higher than that of CrTiAlN coatings. The friction coefficients of the CrTiAlN/TiAlN coatings were higher than those of CrTiAlN coatings against a cemented carbide ball. The microhardness of the CrTiAlN/TiAlN coatings was changed after annealing at 800°C, and the friction coefficients of the annealed coatings were increased against the cemented carbide ball.

  19. First principles study of α2-Ti3Al(0 0 0 1) surface and γ-TiAl(1 1 1)/α2-Ti3Al(0 0 0 1) interfaces

    NASA Astrophysics Data System (ADS)

    Wang, Lu; Shang, Jia-Xiang; Wang, Fu-He; Zhang, Yue

    2013-07-01

    The α2-Ti3Al(0 0 0 1) surface and γ-TiAl(1 1 1)/α2-Ti3Al(0 0 0 1) interfaces with six orientation relationships are studied by using the first-principle density functional theory. The calculated results indicate that the Ti3Al(0 0 0 1) surface has a higher surface energy (1.964 J/m2) and larger surface relaxations, compared with the γ-TiAl(1 1 1) surface. For the γ-TiAl(1 1 1)/α2-Ti3Al(0 0 0 1) interface structures, the work of separation along Ti3Al(0 0 0 1) cleavage plane is larger than that along TiAl(1 1 1) plane. In the interface region, the bonding strengths between Ti3Al layers and between TiAl layers are smaller than those along Ti3Al(0 0 0 1) plane and TiAl(1 1 1) plane in the bulk materials, respectively. The heterogeneous interface would be the weak link in the material, and the bonding strength of interface depends on the weaker one of the two phases. The bonding characteristics of interface are analyzed by the electron local function.

  20. Inclined dislocation arrays in AlGaN/AlGaN quantum well structures emitting at 290 nm

    NASA Astrophysics Data System (ADS)

    Chang, T. Y.; Moram, M. A.; McAleese, C.; Kappers, M. J.; Humphreys, C. J.

    2010-12-01

    We report on the structural and optical properties of deep ultraviolet emitting AlGaN/AlGaN multiple quantum wells (MQWs) grown on (0001) sapphire by metal-organic vapor phase epitaxy using two different buffer layer structures, one containing a thin (1 μm) AlN layer combined with a GaN interlayer and the other a thick (4 μm) AlN layer. Transmission electron microscopy analysis of both structures showed inclined arrays of dislocations running through the AlGaN layers at an angle of ˜30°, originating at bunched steps at the AlN surface and terminating at bunched steps at the surface of the MQW structure. In all layers, these inclined dislocation arrays are surrounded by AlGaN with a relatively higher Ga content, consistent with plan-view cathodoluminescence maps in which the bunched surface steps are associated with longer emission wavelengths. The structure with the 4 μm-thick AlN buffer layer had a dislocation density lower by a factor of 2 (at (1.7±0.1)×109 cm-2) compared to the structure with the 1 μm thick AlN buffer layer, despite the presence of the inclined dislocation arrays.

  1. EARLY SOLAR NEBULA CONDENSATES WITH CANONICAL, NOT SUPRACANONICAL, INITIAL {sup 26}Al/{sup 27}Al RATIOS

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    MacPherson, G. J.; Bullock, E. S.; Janney, P. E.

    2010-03-10

    The short-lived radionuclide {sup 26}Al existed throughout the solar nebula 4.57 Ga ago, and the initial abundance ratio ({sup 26}Al/{sup 27}Al){sub 0}, as inferred from magnesium isotopic compositions of calcium-aluminum-rich inclusions (CAIs) in chondritic meteorites, has become a benchmark for understanding early solar system chronology. Internal mineral isochrons in most CAIs measured by secondary ion mass spectrometry (SIMS) give ({sup 26}Al/{sup 27}Al){sub 0} {approx} (4-5) x 10{sup -5}, called 'canonical'. Some recent high-precision analyses of (1) bulk CAIs measured by multicollector inductively coupled plasma mass spectrometry (MC-ICPMS), (2) individual CAI minerals and their mixtures measured by laser-ablation MC-ICPMS, and (3)more » internal isochrons measured by multicollector (MC)-SIMS indicated a somewhat higher 'supracanonical' ({sup 26}Al/{sup 27}Al){sub 0} ranging from (5.85 {+-} 0.05) x 10{sup -5} to >7 x 10{sup -5}. These measurements were done on coarse-grained Type B and Type A CAIs that probably formed by recrystallization and/or melting of fine-grained condensate precursors. Thus the supracanonical ratios might record an earlier event, the actual nebular condensation of the CAI precursors. We tested this idea by performing in situ high-precision magnesium isotope measurements of individual minerals in a fine-grained CAI whose structures and volatility-fractionated trace element abundances mark it as a primary solar nebula condensate. Such CAIs are ideal candidates for the fine-grained precursors to the coarse-grained CAIs, and thus should best preserve a supracanonical ratio. Yet, our measured internal isochron yields ({sup 26}Al/{sup 27}Al){sub 0} = (5.27 {+-} 0.17) x 10{sup -5}. Thus our data do not support the existence of supracanonical ({sup 26}Al/{sup 27}Al){sub 0} = (5.85-7) x 10{sup -5}. There may not have been a significant time interval between condensation of the CAI precursors and their subsequent melting into coarse

  2. In situ microscopy of rapidly heated nano-Al and nano-Al/WO{sub 3} thermites

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sullivan, Kyle T.; Zachariah, Michael R.; Chiou, Wen-An

    2010-09-27

    The initiation and reaction mechanism of nano-Al and nano-Al thermites in rapid heating environments is investigated in this work. A semiconductor-based grid/stage was used, capable of in situ heating of a sample from room temperature to 1473 K, and at a rate of 10{sup 6} K/s, inside an electron microscope. Nano-Al was rapidly heated in a transmission electron microscope, and before and after images indicate that the aluminum migrates through the shell, consistent with a diffusion-based mechanism. A nano-Al/WO{sub 3} composite was then heated in a scanning electron microscope. The results indicate that a reactive sintering mechanism is occurring formore » the nano-Al/WO{sub 3} thermite, as the products are found to be in surface contact and significantly deformed after the heating pulse.« less

  3. Effect of Al content on impact resistance behavior of Al-Ti-B4C composite fabricated under air atmosphere.

    PubMed

    Zhao, Qian; Liang, Yunhong; Zhang, Zhihui; Li, Xiujuan; Ren, Luquan

    2016-12-01

    Reaction behavior, mechanical property and impact resistance of TiC-TiB 2 /Al composite reacted from Al-Ti-B 4 C system with various Al content via combination method of combustion synthesis and hot pressed sintering under air was investigated. Al content was the key point to the variation of mechanical property and impact resistance. Increasing Al content could increase the density, strength and toughness of the composite. Due to exorbitant ceramic content, 10wt.% and 20wt.% Al-Ti-B 4 C composites exhibited poor molding ability and machinability. Flexural strength, fracture toughness, compressive strength and impact toughness of 30-50wt.% Al-Ti-B 4 C composite were higher than those of Al matrix. The intergranular fracture dispersed and defused impact load and restricted crack extension, enhancing the impact resistance of the composite. The composite with 50wt.% Al content owned highest mechanical properties and impact resistance. The results were useful for the application of TiC-TiB 2 /Al composite in impact resistance field of ceramic reinforced Al matrix composite. Copyright © 2016 Elsevier Ltd. All rights reserved.

  4. Presymptomatic ALS genetic counseling and testing

    PubMed Central

    Stanislaw, Christine; Reyes, Eliana; Hussain, Sumaira; Cooley, Anne; Fernandez, Maria Catalina; Dauphin, Danielle D.; Michon, Sara-Claude; Andersen, Peter M.; Wuu, Joanne

    2016-01-01

    Remarkable advances in our understanding of the genetic contributions to amyotrophic lateral sclerosis (ALS) have sparked discussion and debate about whether clinical genetic testing should routinely be offered to patients with ALS. A related, but distinct, question is whether presymptomatic genetic testing should be offered to family members who may be at risk for developing ALS. Existing guidelines for presymptomatic counseling and testing are mostly based on small number of individuals, clinical judgment, and experience from other neurodegenerative disorders. Over the course of the last 8 years, we have provided testing and 317 genetic counseling sessions (including predecision, pretest, posttest, and ad hoc counseling) to 161 first-degree family members participating in the Pre-Symptomatic Familial ALS Study (Pre-fALS), as well as testing and 75 posttest counseling sessions to 63 individuals with familial ALS. Based on this experience, and the real-world challenges we have had to overcome in the process, we recommend an updated set of guidelines for providing presymptomatic genetic counseling and testing to people at high genetic risk for developing ALS. These recommendations are especially timely and relevant given the growing interest in studying presymptomatic ALS. PMID:27194384

  5. Slow positrons in single-crystal samples of Al and Al-AlxOy

    NASA Astrophysics Data System (ADS)

    Lynn, K. G.; Lutz, H.

    1980-11-01

    Well-characterized Al(111) and Al(100) samples were studied with monoenergetic positrons before and after exposure to oxygen. Both positronium-formation and positron-emission curves were obtained for various incident positron energies at sample temperatures ranging from 160-900 K. The orthopositronium decay signal provides a unique signature that the positron has emerged from the surface region of a clean metal. In the clean Al crystals part of the positronium formed near the surface is found to be associated with a temperature-activated process described as the thermally activated detrapping of a positron from a surface state. A simple positron diffusion model, including surface and vacancy trapping, is fitted to the positronium data and an estimate of the binding energy of the positron in this trap is made. The positron diffusion constant is found to have a negative temperature dependence before the onset of positron trapping at thermally generated monovacancies (>500 K), in reasonable agreement with theoretical predictions. The depth of the positron surface state is reduced or positronium is formed in the chemisorbed layer as oxygen is adsorbed on both Al sample surfaces, thus increasing the positronium fraction and decreasing the positron emission. At higher oxygen exposures [>500 L (1 L = 10-6 torr sec)] positron or positronium traps are generated in the overlayer and the positronium fraction is reduced. The amorphous-to-crystalline surface transition of AlxOy on Al is observed between 650 and 800 K by the change in the positronium fraction and is interpreted as the removal of trapping centers in the metal-oxide overlayer. At the higher temperatures and incident energies vacancy trapping is observed by the decrease in the positron diffusion length in both the clean and the underlying Al of the oxygen-exposed samples. Similar vacancy formation enthalpies for Al are extracted in both the clean and oxygen-covered samples by a simple model and are in good

  6. AL Amyloidosis

    PubMed Central

    2012-01-01

    Definition of the disease AL amyloidosis results from extra-cellular deposition of fibril-forming monoclonal immunoglobulin (Ig) light chains (LC) (most commonly of lambda isotype) usually secreted by a small plasma cell clone. Most patients have evidence of isolated monoclonal gammopathy or smoldering myeloma, and the occurrence of AL amyloidosis in patients with symptomatic multiple myeloma or other B-cell lymphoproliferative disorders is unusual. The key event in the development of AL amyloidosis is the change in the secondary or tertiary structure of an abnormal monoclonal LC, which results in instable conformation. This conformational change is responsible for abnormal folding of the LC, rich in β leaves, which assemble into monomers that stack together to form amyloid fibrils. Epidemiology AL amyloidosis is the most common type of systemic amyloidois in developed countries with an estimated incidence of 9 cases/million inhabitant/year. The average age of diagnosed patients is 65 years and less than 10% of patients are under 50. Clinical description The clinical presentation is protean, because of the wide number of tissues or organs that may be affected. The most common presenting symptoms are asthenia and dyspnoea, which are poorly specific and may account for delayed diagnosis. Renal manifestations are the most frequent, affecting two thirds of patients at presentation. They are characterized by heavy proteinuria, with nephrotic syndrome and impaired renal function in half of the patients. Heart involvement, which is present at diagnosis in more than 50% of patients, leading to restrictive cardiopathy, is the most serious complication and engages prognosis. Diagnostic methods The diagnosis relies on pathological examination of an involved site showing Congo red-positive amyloid deposits, with typical apple-green birefringence under polarized light, that stain positive with an anti-LC antibody by immunohistochemistry and/or immunofluorescence. Due to the

  7. Referral bias in ALS epidemiological studies.

    PubMed

    Logroscino, Giancarlo; Marin, Benoit; Piccininni, Marco; Arcuti, Simona; Chiò, Adriano; Hardiman, Orla; Rooney, James; Zoccolella, Stefano; Couratier, Philippe; Preux, Pierre-Marie; Beghi, Ettore

    2018-01-01

    Despite concerns about the representativeness of patients from ALS tertiary centers as compared to the ALS general population, the extent of referral bias in clinical studies remains largely unknown. Using data from EURALS consortium we aimed to assess nature, extent and impact of referral bias. Four European ALS population-based registries located in Ireland, Piedmont, Puglia, Italy, and Limousin, France, covering 50 million person-years, participated. Demographic and clinic characteristics of ALS patients diagnosed in tertiary referral centers were contrasted with the whole ALS populations enrolled in registries in the same geographical areas. Patients referred to ALS centers were younger (with difference ranging from 1.1 years to 2.4 years), less likely to present a bulbar onset, with a higher proportion of familial antecedents and a longer survival (ranging from 11% to 15%) when compared to the entire ALS population in the same geographic area. A trend for referral bias is present in cohorts drawn from ALS referral centers. The magnitude of the possible referral bias in a particular tertiary center can be estimated through a comparison with ALS patients drawn from registry in the same geographic area. Studies based on clinical cohorts should be cautiously interpreted. The presence of a registry in the same area may improve the complete ascertainment in the referral center.

  8. Referral bias in ALS epidemiological studies

    PubMed Central

    Marin, Benoit; Piccininni, Marco; Arcuti, Simona; Chiò, Adriano; Hardiman, Orla; Rooney, James; Zoccolella, Stefano; Couratier, Philippe; Preux, Pierre-Marie; Beghi, Ettore

    2018-01-01

    Background Despite concerns about the representativeness of patients from ALS tertiary centers as compared to the ALS general population, the extent of referral bias in clinical studies remains largely unknown. Using data from EURALS consortium we aimed to assess nature, extent and impact of referral bias. Methods Four European ALS population-based registries located in Ireland, Piedmont, Puglia, Italy, and Limousin, France, covering 50 million person-years, participated. Demographic and clinic characteristics of ALS patients diagnosed in tertiary referral centers were contrasted with the whole ALS populations enrolled in registries in the same geographical areas. Results Patients referred to ALS centers were younger (with difference ranging from 1.1 years to 2.4 years), less likely to present a bulbar onset, with a higher proportion of familial antecedents and a longer survival (ranging from 11% to 15%) when compared to the entire ALS population in the same geographic area. Conclusions A trend for referral bias is present in cohorts drawn from ALS referral centers. The magnitude of the possible referral bias in a particular tertiary center can be estimated through a comparison with ALS patients drawn from registry in the same geographic area. Studies based on clinical cohorts should be cautiously interpreted. The presence of a registry in the same area may improve the complete ascertainment in the referral center. PMID:29659621

  9. Oxygen-induced Al surface segregation in Al(x)Ga(1-x)As and the effect of Y overlayers on the oxidation of the Y/Al(x)Ga(1-x)As interface

    NASA Technical Reports Server (NTRS)

    Mesarwi, A.; Ignatiev, A.

    1992-01-01

    The oxidation of Al(x)Ga(1-x)As (x = 0.15, AlGaAs) was studied by AES and XPS at 350 C and different oxygen exposures (up to 5 x 10 exp 4 L). Also studied were the effects of yttrium overlayers (theta = 3 ML) on the oxidation of the AlGaAs surface. Substantial oxygen-induced Al surface segregation has been observed for both yttriated and nonyttriated AlGaAs surfaces which increased with increasing oxygen exposure. Also observed is a significant Y-enhanced oxidation of the AlGaAs surface. Oxidation of the yttriated AlGaAs surface was found to be a factor of 4 greater than that of the nonyttriated surface. Also, while oxidation of the nonyttriated AlGaAs yielded mainly Al2O(x) (x less than 3) and only little Ga2O3, the yttriated AlGaAs surface oxide layer was principally Ga2O3 and stoichiometric Al2O3. However, both the yttriated and nonyttriated surfaces were found to contain metallic As within the oxide layer.

  10. An Experimental Investigation of Effects of Fluxes (Na3AlF6 and K2TiF6), Element Alloys (Mg), and Composite Powders ((Al + TiC)CP and (Al + B4C)CP) on Distribution of Particles and Phases in Al-B4C and Al-TiC Composites

    NASA Astrophysics Data System (ADS)

    Mazaheri, Younes; Emadi, Rahmatollah; Meratian, Mahmood; Zarchi, Mehdi Karimi

    2017-04-01

    The wettability, incorporation, and gravity segregation of TiC and B4C particles into molten aluminum are important problems in the production of Al-TiC and Al-B4C composites by the casting techniques. In order to solve these problems, different methods consisting of adding the Na3AlF6 and K2TiF6 fluxes and Mg (as the alloying element) into the molten aluminum and injection of the (Al + TiC)CP and (Al + B4C)CP composite powders instead of B4C and TiC particles are evaluated. In this work, the conditions of sample preparation, such as particle addition temperature, stirring speed, and stirring time, are determined after many studies and tests. Microstructural characterizations of samples are investigated by scanning electron microscopy equipped with energy dispersive spectroscopy (EDS) and X-ray diffractometry. The results show better distribution and incorporation of TiCp and B4Cp in aluminum matrix when the fluxes are used, as well as EDS analysis of the interface between the matrix and reinforcement-strengthened formation of the different phases such as Al4C3 in the Al-TiC composites and Al3BC, TiB2 in the Al-B4C composites.

  11. Surgery for Gynecomastia in the Islamic Golden Age: Al-Tasrif of Al-Zahrawi (936-1013 AD).

    PubMed

    Chavoushi, Seyed Hadi; Ghabili, Kamyar; Kazemi, Abdolhassan; Aslanabadi, Arash; Babapour, Sarah; Ahmedli, Rafail; Golzari, Samad E J

    2012-01-01

    The rise of European science during the Renaissance is greatly indebted to the flourishing of the sciences during the Islamic Golden Age. However, some believe that medieval Islamic physicians and in particular surgeons had been merely a medium for Greco-Roman ideas. Contrarily, in some medieval Islamic medical books, such as Al-Tasrif of Al-Zahrawi (936-1013), the surgical instructions represent a change in the usual techniques or are accompanied by a case history, implying that the procedure was actually undertaken. Along with the hundreds of chapters on different diseases and related medical and surgical treatments, Al-Tasrif includes a chapter on surgical techniques for gynecomastia. The present paper is a review of the description of the surgical management of gynecomastia by Al-Zahrawi as well as that of the ancient Greek, medieval, and modern medicine. Although Al-Zahrawi seemed to base his descriptions of surgery for gynecomastia upon those of Paulus of Aegina, his modification of the procedure and application of the medicinal substances might be indicative of Al-Zahrawi's own practice of the procedure. Al-Zahrawi's surgical procedures remained unchanged for many centuries thenceforward until the technological evolution in the recent centuries.

  12. Cost-Effective TiAl based Materials

    NASA Technical Reports Server (NTRS)

    Moxson, V. S.; Sun, Fusheng; Draper, Susan L.; Froes, F. H.; Duz, V.

    2003-01-01

    Because of their inherent low ductility, TiAl-based materials are difficult to fabricate, especially thin gage titanium gamma aluminide (TiAl) sheet and foil. In this paper, an innovative powder metallurgy approach for producing cost-effective thin gage TiAl sheets (with 356 mm long and 235 mm wide, and a thickness of 0.74, 1.09, 1.55, and 2.34 mm, respectively) is presented. The microstructures and tensile properties at room and elevated temperatures of the thin gage TiAl are studied. Results show that these TiAl sheets have a relatively homogenous chemistry, uniform microstructure, and acceptable mechanical properties. This work demonstrates a cost-effective method for producing both flat products (sheet/foil) and complex chunky parts of TiAl for various advanced applications including aerospace and automotive industries.

  13. Systems Engineering Techniques for ALS Decision Making

    NASA Technical Reports Server (NTRS)

    Rodriquez, Luis F.; Drysdale, Alan E.; Jones, Harry; Levri, Julie A.

    2004-01-01

    The Advanced Life Support (ALS) Metric is the predominant tool for predicting the cost of ALS systems. Metric goals for the ALS Program are daunting, requiring a threefold increase in the ALS Metric by 2010. Confounding the problem, the rate new ALS technologies reach the maturity required for consideration in the ALS Metric and the rate at which new configurations are developed is slow, limiting the search space and potentially giving the perspective of a ALS technology, the ALS Metric may remain elusive. This paper is a sequel to a paper published in the proceedings of the 2003 ICES conference entitled, "Managing to the metric: an approach to optimizing life support costs." The conclusions of that paper state that the largest contributors to the ALS Metric should be targeted by ALS researchers and management for maximum metric reductions. Certainly, these areas potentially offer large potential benefits to future ALS missions; however, the ALS Metric is not the only decision-making tool available to the community. To facilitate decision-making within the ALS community a combination of metrics should be utilized, such as the Equivalent System Mass (ESM)-based ALS metric, but also those available through techniques such as life cycle costing and faithful consideration of the sensitivity of the assumed models and data. Often a lack of data is cited as the reason why these techniques are not considered for utilization. An existing database development effort within the ALS community, known as OPIS, may provide the opportunity to collect the necessary information to enable the proposed systems analyses. A review of these additional analysis techniques is provided, focusing on the data necessary to enable these. The discussion is concluded by proposing how the data may be utilized by analysts in the future.

  14. Evaluation of aerial microbial pollutants in Al-Haram Al-Nabawi during pilgrimage of 2013.

    PubMed

    Alananbeh, Kholoud M; Boquellah, Nahla; Kaff, Nadia Al; Ahmadi, Majid Al

    2017-01-01

    Al-Madinah Al-Munawwarah is the second holiest site in Islam. The possibility of new emerging microbes is valid due to the increased number of pilgrims. The objectives of the current study were to estimate the numbers of fungi and bacteria inside and outside Al-Haram Al-Nabawi and to find whether new bacterial and fungal species have emerged compared to previous studies. Air samples were collected twice a day from 12 spots and four directions during the pilgrim year of 2013 for four consecutive weeks by using the sedimentation method. Thirty five genera and fifty eight species were identified. The most recovered bacterial genera were Staphylococcus, Micrococcus, Bacillus, and Dermacoccus with 32.47%, 18.18%, 12.85%, and 11.23%, respectively. Fifty nine isolates of fungi were molecularly identified. Aspergillus species had the highest percentage (78%). The other fungal genera identified ( Alternaria triticina , Emericella nidulans , Emericella striata , Mucor circinelloides , Penicillium chrysogenum , Penicillium minioluteum , Rhizopus arrhizus , Rhizopus oryzae , and Syncephalastrum racemosum ) had less than 5% frequency. In places such as Al-Haram Al-Nabawi, a large and crowded public (millions) exist especially during pilgrimages and Ramadan, thus, exposure to microorganisms is high. On the other hand, microorganism infectivity depends on many factors including their virulence, landing site, and person's immunity. For those reasons, many aspects should be considered to avoid aerosol contaminants.

  15. AlN and Al oxy-nitride gate dielectrics for reliable gate stacks on Ge and InGaAs channels

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Guo, Y.; Li, H.; Robertson, J.

    2016-05-28

    AlN and Al oxy-nitride dielectric layers are proposed instead of Al{sub 2}O{sub 3} as a component of the gate dielectric stacks on higher mobility channels in metal oxide field effect transistors to improve their positive bias stress instability reliability. It is calculated that the gap states of nitrogen vacancies in AlN lie further away in energy from the semiconductor band gap than those of oxygen vacancies in Al{sub 2}O{sub 3}, and thus AlN might be less susceptible to charge trapping and have a better reliability performance. The unfavourable defect energy level distribution in amorphous Al{sub 2}O{sub 3} is attributed tomore » its larger coordination disorder compared to the more symmetrically bonded AlN. Al oxy-nitride is also predicted to have less tendency for charge trapping.« less

  16. Influence of Content of Al2O3 on Structure and Properties of Nanocomposite Nb-B-Al-O films

    NASA Astrophysics Data System (ADS)

    Liu, Na; Dong, Lei; Dong, Lei; Yu, Jiangang; Pan, Yupeng; Wan, Rongxin; Gu, Hanqing; Li, Dejun

    2015-11-01

    Nb-B-Al-O nanocomposite films with different power of Al2O3 were successfully deposited on the Si substrate via multi-target magnetron co-sputtering method. The influences of Al2O3's content on structure and properties of obtained nanocomposite films through controlling Al2O3's power were investigated. Increasing the power of Al2O3 can influence the bombarding energy and cause the momentum transfer of NbB2. This can lead to the decreasing content of Al2O3. Furthermore, the whole films showed monocrystalline NbB2's (100) phase, and Al2O3 shaded from amorphous to weak cubic-crystalline when decreasing content of Al2O3. This structure and content changes were proof by X-ray diffraction (XRD) and high-resolution transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). When NbB2 grains were far from each other in lower power of Al2O3, the whole films showed a typical nanocomposite microstructure with crystalline NbB2 grains embedded in a matrix of an amorphous Al2O3 phase. Continuing increasing the power of Al2O3, the less content of Al2O3 tended to cause crystalline of cubic-Al2O3 between the close distances of different crystalline NbB2 grains. The appearance of cubic-crystallization Al2O3 can help to raise the nanocomposite films' mechanical properties to some extent. The maximum hardness and elastic modulus were up to 21.60 and 332.78 GPa, which were higher than the NbB2 and amorphous Al2O3 monolithic films. Furthermore, this structure change made the chemistry bond of O atom change from the existence of O-Nb, O-B, and O-Al bonds to single O-Al bond and increased the specific value of Al and O. It also influenced the hardness in higher temperature, which made the hardness variation of different Al2O3 content reduced. These results revealed that it can enhance the films' oxidation resistance properties and keep the mechanical properties at high temperature. The study highlighted the importance of controlling the Al2O3's content to prepare

  17. Microstructural analysis of Ti/Al/Ti/Au ohmic contacts to n-AlGaN/GaN

    NASA Astrophysics Data System (ADS)

    Chen, J.; Ivey, D. G.; Bardwell, J.; Liu, Y.; Tang, H.; Webb, J. B.

    2002-05-01

    To develop high quality AlGaN/GaN heterostructure field effect transistors for use in high power, high frequency, and high temperature applications, low resistance, thermal stable ohmic contacts with good surface morphology are essential. Low specific contact resistances have been achieved using an Au/Ti/Al/Ti contact: a minimum value of 6.33×10-6 Ω cm2 was attained after annealing at 700 °C for 30 s. Microstructural analysis using transmission electron microscopy indicated that there is significant interaction between the metallization components and the semiconductor during annealing. The optimum electrical properties correspond to a microstructure that consists of Au2Ti and TiAl layers as well as of a thin Ti-rich layer (~10 nm thick) at the metallization/AlGaN interface. Degradation of the contact occurred for annealing temperatures in excess of 750 °C, and was accompanied by decomposition of the AlGaN layer and formation of a Au-Ti-Al-Ga quaternary phase.

  18. Characterization of oxide nanoparticles in Al-free and Al-containing oxide dispersion strengthened ferritic steels.

    PubMed

    Lee, Jae Hoon; Kim, Jeoung Han

    2013-09-01

    Oxide nanoparticles in oxide dispersion strengthened (ODS) ferritic steels with and without Al have been characterized by transmission electron microscopy. It is confirmed that most of the complex oxide particles consist of Y2TiO5 for 18Cr-ODS steel and YAlO3 or YAl5O12 for 18Cr5Al-ODS steel, respectivley. The addition of 5% Al in 18Cr-ODS steel leads to the formation of larger oxide particles and the reduction in their number density. For 18Cr-ODS steel, 87% of the oxide particles are coherent. The misfit strain of the coherent particles and a few semi-coherent particles is about 0.034 and 0.056, respectively. For 18Cr5Al-ODS steel, 75% of the oxide particles are semi-coherent, of which the misfit strain is 0.091 and 0.125, respectively. These results suggest that for the Al-containing ODS steel the Al addition accelerates the formation of semi-coherent oxide particles and its larger coherent and semi-coherent particles result in the larger misfit strain between the oxide particle and alloy matrix, indicating that the coherence of oxide nanoparticles in ODS steels is size-dependent.

  19. Microstructural evolution of single Ni 2TiAl or hierarchical NiAl/Ni 2 TiAl precipitates in Fe-Ni-Al-Cr-Ti ferritic alloys during thermal treatment for elevated-temperature applications

    DOE PAGES

    Song, Gian; Sun, Zhiqian; Poplawsky, Jonathan D.; ...

    2017-01-07

    Precipitate features, such as the size, morphology, and distribution, are important parameters determining the mechanical properties of semi- or fully-coherent precipitatehardened alloys at elevated temperatures. In this study, the microstructural formation and evolution of recently-developed Fe-Ni-Al-Cr-Ti alloys with superior creep resistance have been systematically investigated using transmission-electron microscopy (TEM), scanning-electron microscopy (SEM), and atom-probe tomography (APT). These alloys were designed by adding 2 or 4 weight percent (wt. %) Ti into a NiAl-hardened ferritic alloy with a nominal composition of Fe-6.5Al-10Cr-10Ni-3.4Mo-0.25Zr-0.005B in wt. %. These alloys were, then, subjected to a homogenization treatment at 1,473 K for 0.5 hour, followedmore » by aging treatments at 973 K for 1 ~ 500 hours. In the homogenization-treated case, both alloys contain a primary L21-type Ni 2TiAl precipitate, but with the distinct size and morphology of the precipitates and precipitate/matrix interface structures. In the subsequent aging treatments, the 2 wt. % Ti alloy establishes a hierarchical-precipitate structure consisting of a fine network of a B2-type NiAl phase within the parent L2 1-type Ni2TiAl precipitate, while the 4 wt. % Ti alloy retains the single Ni 2TiAl precipitate. It was found that the hierarchical structure is more effective in remaining the coherent interface during the growth/coarsening of the precipitate. The formation of the different types of the precipitates, and their effects on the microstructural evolution are discussed, and the driving forces for these features are identified from the competition between the interface energy and elastic interactions due to the lattice misfit and misfit dislocations.« less

  20. Microstructural evolution of single Ni 2TiAl or hierarchical NiAl/Ni 2 TiAl precipitates in Fe-Ni-Al-Cr-Ti ferritic alloys during thermal treatment for elevated-temperature applications

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Song, Gian; Sun, Zhiqian; Poplawsky, Jonathan D.

    Precipitate features, such as the size, morphology, and distribution, are important parameters determining the mechanical properties of semi- or fully-coherent precipitatehardened alloys at elevated temperatures. In this study, the microstructural formation and evolution of recently-developed Fe-Ni-Al-Cr-Ti alloys with superior creep resistance have been systematically investigated using transmission-electron microscopy (TEM), scanning-electron microscopy (SEM), and atom-probe tomography (APT). These alloys were designed by adding 2 or 4 weight percent (wt. %) Ti into a NiAl-hardened ferritic alloy with a nominal composition of Fe-6.5Al-10Cr-10Ni-3.4Mo-0.25Zr-0.005B in wt. %. These alloys were, then, subjected to a homogenization treatment at 1,473 K for 0.5 hour, followedmore » by aging treatments at 973 K for 1 ~ 500 hours. In the homogenization-treated case, both alloys contain a primary L21-type Ni 2TiAl precipitate, but with the distinct size and morphology of the precipitates and precipitate/matrix interface structures. In the subsequent aging treatments, the 2 wt. % Ti alloy establishes a hierarchical-precipitate structure consisting of a fine network of a B2-type NiAl phase within the parent L2 1-type Ni2TiAl precipitate, while the 4 wt. % Ti alloy retains the single Ni 2TiAl precipitate. It was found that the hierarchical structure is more effective in remaining the coherent interface during the growth/coarsening of the precipitate. The formation of the different types of the precipitates, and their effects on the microstructural evolution are discussed, and the driving forces for these features are identified from the competition between the interface energy and elastic interactions due to the lattice misfit and misfit dislocations.« less

  1. Influence of Al grain boundaries segregations and La-doping on embrittlement of intermetallic NiAl

    NASA Astrophysics Data System (ADS)

    Kovalev, Anatoly I.; Wainstein, Dmitry L.; Rashkovskiy, Alexander Yu.

    2015-11-01

    The microscopic nature of intergranular fracture of NiAl was experimentally investigated by the set of electron spectroscopy techniques. The paper demonstrates that embrittlement of NiAl intermetallic compound is caused by ordering of atomic structure that leads to formation of structural aluminum segregations at grain boundaries (GB). Such segregations contain high number of brittle covalent interatomic bonds. The alloying by La increases the ductility of material avoiding Al GB enrichment and disordering GB atomic structure. The influence of La alloying on NiAl mechanical properties was investigated. GB chemical composition, atomic and electronic structure transformations after La doping were investigated by AES, XPS and EELFS techniques. To qualify the interatomic bonds metallicity the Fermi level (EF) position and electrons density (neff) in conduction band were determined in both undoped and doped NiAl. Basing on experimental results the physical model of GB brittleness formation was proposed.

  2. Molecular and phenotypic characterization of Als1 and Als2 mutations conferring tolerance to acetolactate synthase herbicides in soybean

    PubMed Central

    Walter, Kay L; Strachan, Stephen D; Ferry, Nancy M; Albert, Henrik H; Castle, Linda A; Sebastian, Scott A

    2014-01-01

    BACKGROUND Sulfonylurea (SU) herbicides are effective because they inhibit acetolactate synthase (ALS), a key enzyme in branched-chain amino acid synthesis required for plant growth. A soybean line known as W4-4 was developed through rounds of seed mutagenesis and was demonstrated to have a high degree of ALS-based resistance to both post-emergence and pre-emergence applications of a variety of SU herbicides. This report describes the molecular and phenotypic characterization of the Als1 and Als2 mutations that confer herbicide resistance to SUs and other ALS inhibitors. RESULTS The mutations are shown to occur in two different ALS genes that reside on different chromosomes: Als1 (P178S) on chromosome 4 and Als2 (W560L) on chromosome 6 (P197S and W574L in Arabidopsis thaliana). CONCLUSION Although the Als1 and Als2 genes are unlinked, the combination of these two mutations is synergistic for improved tolerance of soybeans to ALS-inhibiting herbicides. © 2014 DuPont Pioneer. Pest Management Science published by JohnWiley & Sons Ltd on behalf of Society of Chemical Industry. PMID:24425499

  3. Effect of in-situ formed Al3Ti particles on the microstructure and mechanical properties of 6061 Al alloy

    NASA Astrophysics Data System (ADS)

    Gupta, Rahul; Chaudhari, G. P.; Daniel, B. S. S.

    2018-03-01

    In this study, in situ Titanium-tri-aluminide (Al3Ti) particles reinforced Al 6061 alloy matrix composites were fabricated by the reaction of potassium hexafluorotitanate (K2TiF6) inorganic salt with molten Al 6061 alloy via liquid metallurgy route. The development of in-situ Al3Ti particles and their effects on the mechanical properties such as yield strength (YS), ductility, ultimate tensile strength (UTS) and hardness, and microstructure of Al 6061 alloy were studied. It was observed from the results that in-situ formed Al3Ti particles were blocky in morphology whose average size was around 2.6 ± 1.1 μm. Microstructure studies showed that grain size of Al matrix was reduced due to the nucleating effect of Al3Ti particles. It was observed from the mechanical properties analysis that when the volume fraction of Al3Ti particles was increased, the hardness, UTS and YS of the composites were also increased as compared to that of Al 6061 alloy. An improvement in ductility was observed with the dispersion of Al3Ti particles in base alloy which is contrary to many other composites.

  4. Ab-initio thermodynamic and elastic properties of AlNi and AlNi3 intermetallic compounds

    NASA Astrophysics Data System (ADS)

    Yalameha, Shahram; Vaez, Aminollah

    2018-04-01

    In this paper, thermodynamic and elastic properties of the AlNi and AlNi3 were investigated using density functional theory (DFT). The full-potential linearized augmented plane-wave (APW) in the framework of the generalized gradient approximation as used as implemented in the Wien2k package. The temperature dependence of thermal expansion coefficient, bulk modulus and heat capacity in a wide range of temperature (0-1600 K) were investigated. The calculated elastic properties of the compounds show that both intermetallic compounds of AlNi and AlNi3 have surprisingly negative Poisson’s ratio (NPR). The results were compared with other experimental and computational data.

  5. NQRS Data for AlDO2 [Al(OD)O] (Subst. No. 0032)

    NASA Astrophysics Data System (ADS)

    Chihara, H.; Nakamura, N.

    This document is part of Subvolume A `Substances Containing Ag … C10H15' of Volume 48 `Nuclear Quadrupole Resonance Spectroscopy Data' of Landolt-Börnstein - Group III `Condensed Matter'. It contains an extract of Section `3.2 Data tables' of the Chapter `3 Nuclear quadrupole resonance data' providing the NQRS data for AlDO2 [Al(OD)O] (Subst. No. 0032)

  6. Solidification processing of intermetallic Nb-Al alloys

    NASA Technical Reports Server (NTRS)

    Smith, Preston P.; Oliver, Ben F.; Noebe, Ronald D.

    1992-01-01

    Several Nb-Al alloys, including single-phase NbAl3 and the eutectic of Nb2Al and NbAl3, were prepared either by nonconsumable arc melting in Ar or by zone processing in He following initial induction melting and rod casting, and the effect of the solidification route on the microstructure and room-temperature mechanical properties of these alloys was investigated. Automated control procedures and melt conditions for directional solidification of NbAl3 and the Nb2Al/Nb3Al eutectic were developed; high purity and stoichiometry were obtained. The effects of ternary additions of Ti and Ni are described.

  7. Oxidation Resistant Ti-Al-Fe Diffusion Barrier for FeCrAlY Coatings on Titanium Aluminides

    NASA Technical Reports Server (NTRS)

    Brady, Michael P. (Inventor); Smialke, James L. (Inventor); Brindley, William J. (Inventor)

    1996-01-01

    A diffusion barrier to help protect titanium aluminide alloys, including the coated alloys of the TiAl gamma + Ti3Al (alpha2) class, from oxidative attack and interstitial embrittlement at temperatures up to at least 1000 C is disclosed. The coating may comprise FeCrAlX alloys. The diffusion barrier comprises titanium, aluminum, and iron in the following approximate atomic percent: Ti-(50-55)Al-(9-20)Fe. This alloy is also suitable as an oxidative or structural coating for such substrates.

  8. Transplacental passage of 26Al from pregnant rats to fetuses and 26Al transfer through maternal milk to suckling rats

    NASA Astrophysics Data System (ADS)

    Yumoto, S.; Nagai, H.; Matsuzaki, H.; Kobayashi, T.; Tada, W.; Ohki, Y.; Kakimi, S.; Kobayashi, K.

    2000-10-01

    Aluminium (Al) is toxic to the growth of fetuses and sucklings. However, the incorporation of Al into fetuses and sucklings in the periods of gestation and lactation has not been well clarified because Al lacks a suitable isotope for a tracer experiment. In this study, we used 26Al (a radioisotope of Al with half-life of 716,000 yr) as a tracer, and measured 26Al incorporation into fetuses and sucklings by accelerator mass spectrometry (AMS). To investigate Al incorporation into fetuses through transplacental passage, 26Al ( 26AlCl 3) was subcutaneously injected into pregnant rats on day 15 of gestation. 26Al was also subcutaneoulsy injected into lactating rats from day 1 to day 20 postpartum. By day 20 of gestation, 0.2% of the 26Al injected into a pregnant rat had been transferred to the fetuses, and 26Al was detected in the brain and liver of the fetuses. On day 9 postpartum, high levels of 26Al were demonstrated in the brain, liver, kidneys and blood of suckling rats. It is concluded that 26Al subcutaneously injected into pregnant rats and/or lactating rats is incorporated into their offspring through transplacental passage and/or maternal milk.

  9. Durability Assessment of TiAl Alloys

    NASA Technical Reports Server (NTRS)

    Draper, Susan L.; Lerch, Bradley A.

    2008-01-01

    The durability of TiAl is a prime concern for the implementation of TiAl into aerospace engines. Two durability issues, the effect of high temperature exposure on mechanical properties and impact resistance, have been investigated and the results are summarized in this paper. Exposure to elevated temperatures has been shown to be detrimental to the room temperature ductility of gamma alloys with the most likely mechanisms being the ingress of interstitials from the surface. Fluorine ion implantation has been shown to improve the oxidation resistance of gamma alloys, and ideally it could also improve the environmental embrittlement of high Nb content TiAl alloys. The effect of F ion implantation on the surface oxidation and embrittlement of a third generation, high Nb content TiAl alloy (Ti-45Al-5Nb-B-C) were investigated. Additionally, the ballistic impact resistance of a variety of gamma alloys, including Ti-48Al-2Cr- 2Nb, Ti-47Al-2Cr-2Nb, ABB-2, ABB-23, NCG359E, 95A and Ti-45Al-5Nb-B-C was accessed. Differences in the ballistic impact properties of the various alloys will be discussed, particularly with respect to their manufacturing process, microstructure, and tensile properties.

  10. Microarray analysis of peripheral blood lymphocytes from ALS patients and the SAFE detection of the KEGG ALS pathway

    PubMed Central

    2011-01-01

    Background Sporadic amyotrophic lateral sclerosis (sALS) is a motor neuron disease with poorly understood etiology. Results of gene expression profiling studies of whole blood from ALS patients have not been validated and are difficult to relate to ALS pathogenesis because gene expression profiles depend on the relative abundance of the different cell types present in whole blood. We conducted microarray analyses using Agilent Human Whole Genome 4 × 44k Arrays on a more homogeneous cell population, namely purified peripheral blood lymphocytes (PBLs), from ALS patients and healthy controls to identify molecular signatures possibly relevant to ALS pathogenesis. Methods Differentially expressed genes were determined by LIMMA (Linear Models for MicroArray) and SAM (Significance Analysis of Microarrays) analyses. The SAFE (Significance Analysis of Function and Expression) procedure was used to identify molecular pathway perturbations. Proteasome inhibition assays were conducted on cultured peripheral blood mononuclear cells (PBMCs) from ALS patients to confirm alteration of the Ubiquitin/Proteasome System (UPS). Results For the first time, using SAFE in a global gene ontology analysis (gene set size 5-100), we show significant perturbation of the KEGG (Kyoto Encyclopedia of Genes and Genomes) ALS pathway of motor neuron degeneration in PBLs from ALS patients. This was the only KEGG disease pathway significantly upregulated among 25, and contributing genes, including SOD1, represented 54% of the encoded proteins or protein complexes of the KEGG ALS pathway. Further SAFE analysis, including gene set sizes >100, showed that only neurodegenerative diseases (4 out of 34 disease pathways) including ALS were significantly upregulated. Changes in UBR2 expression correlated inversely with time since onset of disease and directly with ALSFRS-R, implying that UBR2 was increased early in the course of ALS. Cultured PBMCs from ALS patients accumulated more ubiquitinated proteins

  11. Comparative research on the influence of varied Al component on the active layer of AlGaN photocathode

    NASA Astrophysics Data System (ADS)

    He, Minyou; Chen, Liang; Su, Lingai; Yin, Lin; Qian, Yunsheng

    2017-06-01

    To theoretically research the influence of a varied Al component on the active layer of AlGaN photocathodes, the first principle based on density functional theory is used to calculate the formation energy and band structure of Al x Ga1-x N with x at 0, 0.125, 0.25, 0.325, and 0.5. The calculation results show that the formation energy declines along with the Al component rise, while the band gap is increasing with Al component increasing. Al x Ga1-x N with x at 0, 0.125, 0.25, 0.325, and 0.5 are direct band gap semiconductors, and their absorption coefficient curves have the same variation tendency. For further study, we designed two kinds of reflection-mode AlGaN photocathode samples. Sample 1 has an Al x Ga1-x N active layer with varied Al component ranging from 0.5 to 0 and decreasing from the bulk to the surface, while sample 2 has an Al x Ga1-x N active layer with the fixed Al component of 0.25. Using the multi-information measurement system, we measured the spectral response of the activated samples at room temperature. Their photocathode parameters were obtained by fitting quantum efficiency curves. Results show that sample 1 has a better spectral response than sample 2 at the range of short-wavelength. This work provides a reference for the structure design of the AlGaN photocathode. Project supported by the National Natural Science Foundation of China (Nos. 61308089, 6144005) and the Public Technology Applied Research Project of Zhejiang Province (No. 2013C31068).

  12. FTD and ALS: genetic ties that bind.

    PubMed

    Orr, Harry T

    2011-10-20

    Curiously, amyotrophic lateral sclerosis (ALS) and frontotemporal dementia (FTD), seemingly disparate neurodegenerative disorders, can be inherited together. Two groups (DeJesus-Hernandez et al. and Renton et al.) show that the long sought after ALS/FTD mutation on chromosomal region 9p is a hexanucleotide expansion in C90RF72. These studies, plus a study on X-linked ALS/FTD, provide molecular starting points for identifying pathways that link ALS and FTD pathogenesis. Copyright © 2011 Elsevier Inc. All rights reserved.

  13. Effect of Al gate on the electrical behaviour of Al-doped Ta2O5 stacks

    NASA Astrophysics Data System (ADS)

    Skeparovski, A.; Novkovski, N.; Atanassova, E.; Paskaleva, A.; Lazarov, V. K.

    2011-06-01

    The electrical behaviour of Al-doped Ta2O5 films on nitrided silicon and implemented in Al-gated MIS capacitors has been studied. The dopant was introduced into the Ta2O5 through its surface by deposing a thin Al layer on the top of Ta2O5 followed by an annealing process. The HRTEM images reveal that the initial double-layer structure of the stacks composed of doped Ta2O5 and interfacial SiON layer undergoes changes during the formation of the Al gate and transforms into a three-layer structure with an additional layer between the Al electrode and the doped Ta2O5. This layer, being a result of reaction between the Al gate and the Al-doped Ta2O5, affects the overall electrical properties of the stacks. Strong charge trapping/detrapping processes have been established in the vicinity of the doped Ta2O5/SiON interface resulting in a large C-V hysteresis effect. The charge trapping also influences the current conduction in the layers keeping the current density level rather low even at high electric fields (J < 10-6 A cm-2 at 7 MV cm-1). By employing a three-layer model of the stack, the permittivity of both, the Al-doped Ta2O5 and the additional layer, has been estimated and the corresponding conduction mechanisms identified.

  14. ALS-linked mutant SOD1 proteins promote Aβ aggregates in ALS through direct interaction with Aβ.

    PubMed

    Jang, Ja-Young; Cho, Hyungmin; Park, Hye-Yoon; Rhim, Hyangshuk; Kang, Seongman

    2017-11-04

    Amyotrophic lateral sclerosis (ALS) is a neurodegenerative disease characterized by progressive degeneration of motor neurons. Aggregation of ALS-linked mutant Cu/Zn superoxide dismutase (SOD1) is a hallmark of a subset of familial ALS (fALS). Recently, intracellular amyloid-β (Aβ) is detected in motor neurons of both sporadic and familial ALS. We have previously shown that intracellular Aβ specifically interacts with G93A, an ALS-linked SOD1 mutant. However, little is known about the pathological and biological effect of this interaction in neurons. In this study, we have demonstrated that the Aβ-binding region is exposed on the SOD1 surface through the conformational changes due to misfolding of SOD1. Interestingly, we found that the intracellular aggregation of Aβ is enhanced through the direct interaction of Aβ with the Aβ-binding region exposed to misfolded SOD1. Ultimately, increased Aβ aggregation by this interaction promotes neuronal cell death. Consistent with this result, Aβ aggregates was three-fold higher in the brains of G93A transgenic mice than those of non Tg. Our study provides the first direct evidence that Aβ, an AD-linked factor, is associated to the pathogenesis of ALS and provides molecular clues to understand common aggregation mechanisms in the pathogenesis of neurodegenerative diseases. Furthermore, it will provide new insights into the development of therapeutic approaches for ALS. Copyright © 2017 Elsevier Inc. All rights reserved.

  15. [Productivity, visibility and citation analysis of the Revista Peruana de Medicina Experimental y Salud Pública, 2002-2009].

    PubMed

    Huamaní, Charles

    2010-09-01

    Biomedical journals are the most used and important venue to disseminate and interchange scientific information, and evaluation is an important component. A bibliometric study was conducted on the productivity, visibility and citation analysis of the Revista Peruana de Medicina Experimental y Salud Pública (RPMESP), from 2002 to 2009. During this period, the RPMESP published about 62 documents per year, 55.3% were research articles. The visibility of RPMESP, determined among three databases (SISBIB-UNMSM, SciELO-Peru, and REDALYC), was irregular, increasing on July 2006, with the highest access on October 2009 (117,618 hits). 43.0% of publications were cited. The calculated impact factor in ISI journals was 0.04 in 2009. In conclusion, the citation of RPMESP shows a slowly growing during the period 2002-2009. It is hoped that the RPMESP increase its visibility and impact after its inclusion in MEDLINE.

  16. Grain refinement of 7075Al alloy microstructures by inoculation with Al-Ti-B master alloy

    NASA Astrophysics Data System (ADS)

    Hotea, V.; Juhasz, J.; Cadar, F.

    2017-05-01

    This paper aims to bring some clarification on grain refinement and modification of high strength alloys used in aerospace technique. In this work it was taken into account 7075 Al alloy, and the melt treatment was carried out by placing in the form of master alloy wire ternary AlTiB the casting trough at 730°C. The morphology of the resulting microstructures was characterized by optical microscopy. Micrographs unfinished and finished with pre-alloy containing ternary Al5Ti1B evidence fine crystals, crystal containing no columnar structure and highlights the size of the dendrites, and intermetallic phases occurring at grain boundaries in Al-Zn-Mg-Cu alloy. It has been found that these intermetallic compounds are MgZn2 type. AlTiB master alloys finishing ensures a fine eutectic structure, which determines the properties of hardware and improving the mechanical properties of aluminum alloys used in aeronautical engineering.

  17. ALS syndrome in patients with HIV-1 infection.

    PubMed

    Verma, Ashok; Berger, Joseph R

    2006-01-15

    A viral etiology of amyotrophic lateral sclerosis (ALS) has been proposed because of the selective vulnerability of motor neurons to certain viruses. During the last 20 years, at least 19 cases of ALS or ALS-like disease have been reported in HIV-1 (HIV) seropositive individuals. To describe two cases of clinically definite ALS in patients with HIV infection and to review the previously reported cases of HIV-associated ALS syndrome. A multidisciplinary ALS center and Neuro-AIDS clinic at a tertiary care university hospital. We investigated and prospectively monitored two patients who had developed clinically definite ALS by El Escorial criteria several years after acquiring the HIV infection. The previously reported cases of ALS or ALS-like disease in patients with HIV infection were reviewed for comparison and contrast with the characteristics of sporadic ALS. The clinical course of ALS in our two HIV seropositive individuals mirrored that of classical sporadic ALS. A review of previously described 19 patients with ALS syndrome revealed clinically definite ALS in 4 cases and clinically probable or possible ALS in 15. ALS commenced at different stages of the HIV disease; in 7 patients, HIV infection was discovered contemporaneously with diagnosis of ALS. CD4+ T cell count ranged from 2 to 560 cells/mm3. Three (1 definite ALS) of the fatal cases were studied at autopsy and all exhibited pathology outside the motor neuron pool. Unlike our patients, 7 of 8 patients with HIV-associated ALS syndrome receiving HAART demonstrated at least partial recovery of their motor deficit. ALS-like syndrome can occur in association with HIV infection; however, the causal relationship remains uncertain. Patients with ALS syndrome related to HIV infection are generally younger in age and often demonstrate pathology outside the motor neuron system. Patients with HIV-associated ALS syndrome may improve following antiretroviral therapy. An aggressive HAART regimen to reduce viral load

  18. A conduction model for contacts to Si-doped AlGaN grown on sapphire and single-crystalline AlN

    NASA Astrophysics Data System (ADS)

    Haidet, Brian B.; Bryan, Isaac; Reddy, Pramod; Bryan, Zachary; Collazo, Ramón; Sitar, Zlatko

    2015-06-01

    Ohmic contacts to AlGaN grown on sapphire substrates have been previously demonstrated for various compositions of AlGaN, but contacts to AlGaN grown on native AlN substrates are more difficult to obtain. In this paper, a model is developed that describes current flow through contacts to Si-doped AlGaN. This model treats the current through reverse-biased Schottky barriers as a consequence of two different tunneling-dependent conduction mechanisms in parallel, i.e., Fowler-Nordheim emission and defect-assisted Frenkel-Poole emission. At low bias, the defect-assisted tunneling dominates, but as the potential across the depletion region increases, tunneling begins to occur without the assistance of defects, and the Fowler-Nordheim emission becomes the dominant conduction mechanism. Transfer length method measurements and temperature-dependent current-voltage (I-V) measurements of Ti/Al-based contacts to Si-doped AlGaN grown on sapphire and AlN substrates support this model. Defect-assisted tunneling plays a much larger role in the contacts to AlGaN on sapphire, resulting in nearly linear I-V characteristics. In contrast, contacts to AlGaN on AlN show limited defect-assisted tunneling appear to be only semi-Ohmic.

  19. EFFECT OF Mg AND TEMPERATURE ON Fe-Al ALLOY LAYER IN Fe/(Zn-6%Al-x%Mg) SOLID-LIQUID DIFFUSION COUPLES

    NASA Astrophysics Data System (ADS)

    Liang, Liu; Liu, Ya-Ling; Liu, Ya; Peng, Hao-Ping; Wang, Jian-Hua; Su, Xu-Ping

    Fe/(Zn-6%Al-x%Mg) solid-liquid diffusion couples were kept at various temperatures for different periods of time to investigate the formation and growth of the Fe-Al alloy layer. Scanning electron microscopy (SEM), energy dispersive spectrometry (EDS) and X-ray diffraction (XRD) were used to study the constituents and morphology of the Fe-Al alloy layer. It was found that the Fe2Al5Znx phase layer forms close to the iron sheet and the FeAl3Znx phase layer forms near the side of the melted Zn-6%Al-3%Mg in diffusion couples. When the Fe/(Zn-6%Al-3%Mg) diffusion couple is kept at 510∘C for more than 15min, a continuous Fe-Al alloy layer is formed on the interface of the diffusion couple. Among all Fe/(Zn-6%Al-x%Mg) solid-liquid diffusion couples, the Fe-Al alloy layer on the interface of the Fe/(Zn-6% Al-3% Mg) diffusion couple is the thinnest. The Fe-Al alloy layer forms only when the diffusion temperature is above 475∘. These results show that the Fe-Al alloy layer in Fe/(Zn-6%Al-x%Mg) solid-liquid diffusion couples is composed of Fe2Al5Znx and FeAl3Znx phase layers. Increasing the diffusing temperature and time period would promote the formation and growth of the Fe-Al alloy layer. When the Mg content in the Fe/(Zn-6%Al-x%Mg) diffusion couples is 3%, the growth of the Fe-Al alloy layer is inhibited. These results may explain why there is no obvious Fe-Al alloy layer formed on the interface of steel with a Zn-6%Al-3%Mg coating.

  20. 78 FR 6172 - In the Matter of the Designation of Ahmed Abdullah Saleh al-Khazmari al-Zahrani Also Known as Abu...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-29

    ... DEPARTMENT OF STATE [Public Notice 8168] In the Matter of the Designation of Ahmed Abdullah Saleh al- Khazmari al-Zahrani Also Known as Abu Maryam al-Saudi Also Known as Ahmed Abdullah S al-Zahrani... Abu Maryam al-Saudi; also known as Ahmed Abdullah S al-Zahrani, also known as Ahmad Abdullah Salih Al...

  1. Raman studies of nanocomposites catalysts: temperature and pressure effects of CeAl, CeMn and NiAl oxides

    NASA Astrophysics Data System (ADS)

    da Silva, Antonio N.; Neto, Antonio B. S.; Oliveira, Alcemira C.; Junior, Manoel C.; Junior, Jose A. L.; Freire, Paulo T. C.; Filho, Josué M.; Oliveira, Alcineia C.; Lang, Rossano

    2018-06-01

    High temperature and pressure effects on the physicochemical properties of binary oxides catalysts were investigated. The nanocomposites catalysts comprising of CeAl, CeMn and NiAl were characterized through various physicochemical techniques. A study of the temperature and pressure induced phenomena monitored by Raman spectroscopy was proposed and discussed. Spectral modifications of the Raman modes belonging to the CeMn suggest structural changes in the solid due to the MnO2 phase oxidation with increasing temperature. The thermal expansion and lattice anharmonicity effects were observed on CeMn due to lack of stability of the lattice vacancies. The CeAl and NiAl composites presented crystallographic stability at low temperatures however, undertake a phase transformation of NiO/Al2O3 into NiAl2O4, mostly without any deformation in its structure with increasing the temperature. It was also inferred that the binary oxides are more stables in comparison with monoxides. Detailed pressure-dependent Raman measurements of the T2g phonon mode of CeMn and NiAl revealed that the pressure contributes to modify bonds length and reduces the particles sizes of the solids. On the contrary, high pressure on CeAl sample improved the stability with addition of Al2O3 in the CeO2 lattice. The results then suggest a good stability of CeAl and NiAl composite catalysts at high pressure and low temperature and show how to prospect of tuning the catalysis for surface reactions entirely through in situ spectroscopic investigations means.

  2. Improving heart healthy lifestyles among participants in a Salud para su Corazón promotores model: the Mexican pilot study, 2009-2012.

    PubMed

    Balcázar, Héctor; Fernández-Gaxiola, Ana Cecilia; Pérez-Lizaur, Ana Bertha; Peyron, Rosa Adriana; Ayala, Carma

    2015-03-12

    In Mexico, cardiovascular disease and its risk factors are growing problems and major public health concerns. The objective of this study was to implement cardiovascular health promotion and disease prevention activities of the Salud para su Corazón model in a high-risk, impoverished, urban community in Mexico City. We used a pretest-posttest (baseline to 12-week follow-up) design without a control group. Material from Salud para su Corazón was validated and delivered by promotores (community health workers) to community members from 6 geographic areas. Two validated, self-administered questionnaires that assessed participants' knowledge and behaviors relating to heart health were administered. We used t tests and χ(2) tests to evaluate pretest and posttest differences, by age group (≤60 and >60 years), for participants' 3 heart-healthy habits, 3 types of physical activity, performance skills, and anthropometric and clinical measurements. A total of 452 (82%) adult participants completed the program. Heart-healthy habits from pretest to posttest varied by age group. "Taking action" to modify lifestyle behaviors increased among adults aged 60 or younger from 31.5% to 63.0% (P < .001) and among adults older than 60 from 30.0% to 45.0% (P < .001). Positive responses for cholesterol and fat consumption reduction were seen among participants 60 or younger (P = .03). Among those older than 60, salt reduction and weight control increased (P = .008). Mean blood glucose concentration among adults older than 60 decreased postintervention (P = .03). Significant improvements in some heart-healthy habits were seen among adult participants. The model has potential to improve heart-healthy habits and facilitate behavioral change among high-risk adults.

  3. Phase Constituents and Microstructure of Ti3Al/Fe3Al + TiN/TiB2 Composite Coating on Titanium Alloy

    NASA Astrophysics Data System (ADS)

    Li, Jianing; Chen, Chuanzhong; Zhang, Cuifang

    Laser cladding of the Fe3Al + B4C/TiN + Al2O3 pre-placed powders on the Ti-6Al-4V alloy can form the Ti3Al/Fe3Al + TiN/TiB2 composite coating, which improved the wear resistance of the Ti-6Al-4V alloy surface. In this study, the Ti3Al/Fe3Al + TiN/TiB2 composite coating has been researched by means of X-ray diffraction and scanning electron microscope. It was found that during the laser cladding process, Al2O3 can react with TiB2, leading to the formations of Ti3Al and B. This principle can be used to improve the Fe3Al + B4C/TiN laser-cladded coating on the Ti-6Al-4V alloy. Furthermore, during the cladding process, C consumed the oxygen in Fe3Al + B4C /TiN + Al2O3 molten pool, which retarded the productions of the redundant metal oxides.

  4. The cyclic oxidation resistance at 1200 C of beta-NiAl, FeAl, and CoAl alloys with selected third element additions

    NASA Technical Reports Server (NTRS)

    Barrett, C. A.; Titran, R. H.

    1992-01-01

    The intermetallic compounds Beta-NiAl, FeAl, and CoAl were tested in cyclic oxidation with selected third element alloy additions. Tests in static air for 200 1-hr cycles at 1200 C indicated by specific weight change/time data and x-ray diffraction analysis that the 5 at percent alloy additions did not significantly improve the oxidation resistance over the alumina forming baseline alloys without the additions. Many of the alloy additions were actually deleterious. Ta and Nb were the only alloy additions that actually altered the nature of the oxide(s) formed and still maintained the oxidation resistance of the protective alumina scale.

  5. Candida albicans Agglutinin-Like Sequence (Als) Family Vignettes: A Review of Als Protein Structure and Function

    PubMed Central

    Hoyer, Lois L.; Cota, Ernesto

    2016-01-01

    Approximately two decades have passed since the description of the first gene in the Candida albicans ALS (agglutinin-like sequence) family. Since that time, much has been learned about the composition of the family and the function of its encoded cell-surface glycoproteins. Solution of the structure of the Als adhesive domain provides the opportunity to evaluate the molecular basis for protein function. This review article is formatted as a series of fundamental questions and explores the diversity of the Als proteins, as well as their role in ligand binding, aggregative effects, and attachment to abiotic surfaces. Interaction of Als proteins with each other, their functional equivalence, and the effects of protein abundance on phenotypic conclusions are also examined. Structural features of Als proteins that may facilitate invasive function are considered. Conclusions that are firmly supported by the literature are presented while highlighting areas that require additional investigation to reveal basic features of the Als proteins, their relatedness to each other, and their roles in C. albicans biology. PMID:27014205

  6. The implementation of health promotion in primary and community care: a qualitative analysis of the 'Prescribe Vida Saludable' strategy.

    PubMed

    Martinez, Catalina; Bacigalupe, Gonzalo; Cortada, Josep M; Grandes, Gonzalo; Sanchez, Alvaro; Pombo, Haizea; Bully, Paola

    2017-02-17

    The impact of lifestyle on health is undeniable and effective healthy lifestyle promotion interventions do exist. However, this is not a fundamental part of routine primary care clinical practice. We describe factors that determine changes in performance of primary health care centers involved in piloting the health promotion innovation 'Prescribe Vida Saludable' (PVS) phase II. We engaged four primary health care centers of the Basque Healthcare Service in an action research project aimed at changing preventive health practices. Prescribe Healthy Life (PVS from the Spanish "Prescribe Vida Saludable) is focused on designing, planning, implementing and evaluating innovative programs to promote multiple healthy habits, feasible to be performed in routine primary health care conditions. After 2 years of piloting, centers were categorized as having high, medium, or low implementation effectiveness. We completed qualitative inductive and deductive analysis of five focus groups with the staff of the centers. Themes generated through consensual grounded qualitative analysis were compared between centers to identify the dimensions that explain the variation in actual implementation of PVS, and retrospectively organized and assessed against the Consolidated Framework for Implementation Research (CFIR). Of the 36 CFIR constructs, 11 were directly related to the level of implementation performance: intervention source, evidence strength and quality, adaptability, design quality and packaging, tension for change, learning climate, self-efficacy, planning, champions, executing, and reflecting and evaluating, with -organizational tracking added as a new sub-construct. Additionally, another seven constructs emerged in the participants' discourse but were not related to center performance: relative advantage, complexity, patients' needs and resources, external policy and incentives, structural characteristics, available resources, and formally appointed internal implementation

  7. Preparation and Bond Properties of Thermal Barrier Coatings on Mg Alloy with Sprayed Al or Diffused Mg-Al Intermetallic Interlayer

    NASA Astrophysics Data System (ADS)

    Fan, Xizhi; Wang, Ying; Zou, Binglin; Gu, Lijian; Huang, Wenzhi; Cao, Xueqiang

    2014-02-01

    Sprayed Al or diffused Mg-Al layer was designed as interlayer between the thermal barrier coatings (TBCs) and Mg alloy substrate. The effects of the interlayer on the bond properties of the coats were investigated. Al layers were prepared by arc spraying and atmospheric plasma spraying (APS), respectively. Mg-Al diffused layer was obtained after the heat treatment of the sprayed sample (Mg alloy with APS Al coat) at 400 °C. The results show that sprayed Al interlayer does not improve the bond stability of TBCs. The failure of the TBCs on Mg alloy with Al interlayer occurs mainly due to the low strength of Al layer. Mg-Al diffused layer improves corrosion resistance of substrate and the bond interface. The TBCs on Mg alloy with Mg-Al diffused interlayer shows better bond stability than the sample of which the TBCs is directly sprayed on Mg alloy substrate by APS.

  8. [Bibliometric study of the original articles published in Revista Española de Salud Púiblica (1991-2000). Part III: reference analysis].

    PubMed

    Villar Alvarez, Fernando; Estrada Lorenzo, José Manuel; Peréz Andrés, Christina; Rebollo Rodríguez, M José

    2007-01-01

    The advancement of knowledge is based on the results of previously conducted research studies, which are reflected in the reference sources listed in a scientific article. This study is aimed at studying the scientific information used in the Revista Española de Salud Pública based on the references cited in the original articles published during the 1991-2000 period. The data regarding the year and where published, document type, language and country in which published was taken from the reference sources listed in the 290 original articles published, the obsolescence, Price and isolation indexes being calculated, and the Bradford core distribution being established according to the source journals. The self-citing rate was also calculated. A total of 7465 references were cited in the Reference section of the 290 original articles. An average of 25.7 references were cited per article. The Price index was 40.7. The scientific articles showed an obsolescence index of 5, the books and book chapters having an index of 6. A total 50.6% of the citations were from studies published in Spanish. The isolation index of the references was 48.1. The first Bradford core is comprised of 10 journals, the first four of which are Spanish. The self-citing rate was 3.8%. The information consumption of the original articles published in the Revista Española de Salud Pública show parameters similar to those of other Spanish health sciences journals for those same years, and the parameters regarding which this Journal differs from other Spanish health sciences journals seem to be justified by those particular aspects unique to public health, which does not fall within the patterns inherent to the clinical disciplines.

  9. Lattice crossover and phase transitions in NdAlO{sub 3}-GdAlO{sub 3} system

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Vasylechko, L., E-mail: crystal-lov@polynet.lviv.ua; Shmanko, H.; Ohon, N.

    2013-02-15

    Phase and structural behaviour in the (1-x)NdAlO{sub 3}-xGdAlO{sub 3} system in a whole concentration range has been studied by means of in situ high-resolution X-ray synchrotron powder diffraction technique and differential thermal analysis. Two kinds of solid solutions Nd{sub 1-x}Gd{sub x}AlO{sub 3} have been found at room temperature: one with rhombohedral (x<0.15) and one with orthorhombic (x{>=}0.20) symmetry. A morphotropic phase transition occurs at x Almost-Equal-To 0.15, where the co-existence of both phases was observed. Peculiarity of the orthorhombic solid solution is the lattice parameter crossover at the compositions with x=0.33, 0.49 and 0.62. First-order structural transition Pbnm{r_reversible}R3{sup Macron }cmore » has been detected both from in situ powder diffraction and thermal analysis data. Continuous phase transformation R3{sup Macron }c{r_reversible}Pm3{sup Macron }m above 2140 K has been predicted for Nd-rich sample Nd{sub 0.85}Gd{sub 0.15}AlO{sub 3} from the extrapolation of high-temperature behaviour of the lattice parameter ratio of the rhombohedral phase. Based on the experimental data, the phase diagram of the pseudo-binary system NdAlO{sub 3}-GdAlO{sub 3} has been constructed. - Graphical abstract: Concentration dependencies of normalized lattice parameters of Nd{sub 1-x}Gd{sub x}AlO{sub 3} perovskite solid solutions. Highlights: Black-Right-Pointing-Pointer Two kinds of solid solutions Nd{sub 1-x}Gd{sub x}AlO{sub 3} were found in the NdAlO{sub 3}-GdAlO{sub 3} system. Black-Right-Pointing-Pointer Morphotropic transition between both perovskite phases occurs at x Almost-Equal-To 0.15. Black-Right-Pointing-Pointer Lattice parameter crossover was found in orthorhombic solid solution. Black-Right-Pointing-Pointer Temperature driven first-order phase transition Pbnm{r_reversible}R3{sup Macron }c was found in Nd{sub 1-x}Gd{sub x}AlO{sub 3}. Black-Right-Pointing-Pointer Phase diagram of the pseudo-binary system NdAlO{sub 3}-GdAlO{sub 3

  10. Emission mechanisms in Al-rich AlGaN/AlN quantum wells assessed by excitation power dependent photoluminescence spectroscopy

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Iwata, Yoshiya; Banal, Ryan G.; Ichikawa, Shuhei

    2015-02-21

    The optical properties of Al-rich AlGaN/AlN quantum wells are assessed by excitation-power-dependent time-integrated (TI) and time-resolved (TR) photoluminescence (PL) measurements. Two excitation sources, an optical parametric oscillator and the 4th harmonics of a Ti:sapphire laser, realize a wide range of excited carrier densities between 10{sup 12} and 10{sup 21 }cm{sup −3}. The emission mechanisms change from an exciton to an electron-hole plasma as the excitation power increases. Accordingly, the PL decay time is drastically reduced, and the integrated PL intensities increase in the following order: linearly, super-linearly, linearly again, and sub-linearly. The observed results are well accounted for by rate equationsmore » that consider the saturation effect of non-radiative recombination processes. Using both TIPL and TRPL measurements allows the density of non-radiative recombination centers, the internal quantum efficiency, and the radiative recombination coefficient to be reliably extracted.« less

  11. Growth of crack-free GaN films on Si(111) substrate by using Al-rich AlN buffer layer

    NASA Astrophysics Data System (ADS)

    Lu, Yuan; Cong, Guangwei; Liu, Xianglin; Lu, Da-Cheng; Zhu, Qinsheng; Wang, Xiaohui; Wu, Jiejun; Wang, Zhanguo

    2004-11-01

    GaN epilayers were grown on Si(111) substrate by metalorganic chemical vapor deposition. By using the Al-rich AlN buffer which contains Al beyond stoichiometry, crack-free GaN epilayers with 1 μm thickness were obtained. Through x-ray diffraction (XRD) and secondary ion mass spectroscopy analyses, it was found that a lot of Al atoms have diffused into the under part of the GaN epilayer from the Al-rich AlN buffer, which results in the formation of an AlxGa1-xN layer at least with 300 nm thickness in the 1 μm thick GaN epilayer. The Al fraction x was estimated by XRD to be about 2.5%. X-ray photoelectron spectroscopy depth analysis was also applied to investigate the stoichiometry in the Al-rich buffer before GaN growth. It is suggested that the underlayer AlxGa1-xN originated from Al diffusion probably provides a compressive stress to the upper part of the GaN epilayer, which counterbalances a part of tensile stress in the GaN epilayer during cooling down and consequently reduces the cracks of the film effectively. The method using the Al diffusion effect to form a thick AlGaN layer is really feasible to achieve the crack-free GaN films and obtain a high crystal quality simultaneously.

  12. Unusual Oxidative Limitations for Al-MAX Phases

    NASA Technical Reports Server (NTRS)

    Smialek, James L.

    2017-01-01

    Alumina-forming MAX phases are well-known for their excellent oxidation resistance, rivaling many metallic NiAl, NiCrAl, and FeCrAl counterparts and with upper temperature capability possible to approximately1400C. However a number of limitations have been emerging that need to be acknowledged to permit robust performance in demanding applications. Ti2AlC and Ti3AlC2 possess excellent scale adhesion, cyclic oxidation/moisture/volatility resistance, and TBC compatibility. However they are very sensitive to Al content and flux in order to maintain an exclusive Al2O3 scale without runaway oxidation of ubiquitous TiO2 transient scales. Accelerated oxidation has been shown to occur for Al-depleted, damaged, or roughened surfaces at temperatures less than 1200C. Conversely, Cr2AlC is less sensitive to transients, but exhibits volatile losses at 1200C or above if common Cr7C3 impurity phases are present. Poor scale adhesion is exhibited after oxidation at 1150C or above, where spallation occurs at the Cr7C3 (depletion zone) interface. Delayed spallation is significant and suggests a moisture-induced phenomenon similar to non-adherent metallic systems. Re-oxidation of this surface does not reproduce the initial pure Al2O3 behavior, but initiates a less-protective scale. Cr2AlC has also been shown to have good long term bonding with superalloys at 800C, but exhibits significant Beta-NiAl + Cr7C3 diffusion zones at 1100C and above. This may set limits on Cr2AlC as a high temperature TBC bond coat on Ni-based superalloys, while improving corrosion resistance in lower temperature applications.

  13. An AlN/Al{sub 0.85}Ga{sub 0.15}N high electron mobility transistor

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Baca, Albert G.; Armstrong, Andrew M.; Allerman, Andrew A.

    2016-07-18

    An AlN barrier high electron mobility transistor (HEMT) based on the AlN/Al{sub 0.85}Ga{sub 0.15}N heterostructure was grown, fabricated, and electrically characterized, thereby extending the range of Al composition and bandgap for AlGaN channel HEMTs. An etch and regrowth procedure was implemented for source and drain contact formation. A breakdown voltage of 810 V was achieved without a gate insulator or field plate. Excellent gate leakage characteristics enabled a high I{sub on}/I{sub off} current ratio greater than 10{sup 7} and an excellent subthreshold slope of 75 mV/decade. A large Schottky barrier height of 1.74 eV contributed to these results. The room temperature voltage-dependent 3-terminalmore » off-state drain current was adequately modeled with Frenkel-Poole emission.« less

  14. The Effectiveness of Al-Si Coatings for Preventing Interfacial Reaction in Al-Mg Dissimilar Metal Welding

    NASA Astrophysics Data System (ADS)

    Wang, Yin; Al-Zubaidy, Basem; Prangnell, Philip B.

    2018-01-01

    The dissimilar welding of aluminum to magnesium is challenging because of the rapid formation of brittle intermetallic compounds (IMC) at the weld interface. An Al-Si coating interlayer was selected to address this problem, based on thermodynamic calculations which predicted that silicon would change the reaction path to avoid formation of the normally observed binary Al-Mg IMC phases ( β-Al3Mg2 and γ-Al12Mg17). Long-term static heat treatments confirmed that a Si-rich coating will preferentially produce the Mg2Si phase in competition with the less stable, β-Al3Mg2 and γ-Al12Mg17 binary IMC phases, and this reduced the overall reaction layer thickness. However, when an Al-Si clad sheet was tested in a real welding scenario, using the Refill™ friction stir spot welding (FSSW) technique, Mg2Si was only produced in very small amounts owing to the much shorter reaction time. Surprisingly, the coating still led to a significant reduction in the IMC reaction layer thickness and the welds exhibited enhanced mechanical performance, with improved strength and fracture energy. This beneficial behavior has been attributed to the softer coating material both reducing the welding temperature and giving rise to the incorporation of Si particles into the reaction layer, which toughened the brittle interfacial IMC phases during crack propagation.

  15. Epidemiological Trends of Cutaneous Leishmaniasis in Al-Madinah Al-Munawarah Province, Western Region of Saudi Arabia.

    PubMed

    Elmekki, Miskelyemen Abdelatti; Elhassan, Mogahid M; Ozbak, Hani A; Qattan, Ilham T; Saleh, Satti M; Alharbi, Ali H

    2017-01-01

    To investigate the epidemiological trends of cutaneous leishmaniasis (CL) in Al-Madinah Al-Munawarah, western region of KSA. Four hundred and sixty-seven parasitologically confirmed CL cases attending Al-Meeqat Hospital, Al-Madinah, during 2012-2015, were included in this study. Both Saudi and non-Saudi nationals were infected, with the highest infection rate being among Saudis (68.7%). Males were more affected than females as 86.9% of the total CL cases were males. Moreover, CL was prevalent in all age groups with higher frequency among young adults and adolescents (23.1% and 22.7%, respectively). Interestingly, almost all the patients in the adolescent and child age groups were Saudis (96.2% and 93.5%, respectively). Considering geographical distribution, the highest percentage of the cases (40.5%) were from the northern parts of Al-Madinah province while the eastern parts reported the least infection rate (7.3%). Few cases (2.5%) were supposed to encounter the infection abroad. Additionally, the frequency of infection was found to follow a seasonal distribution. Regarding treatment, pentostam, ketoconazole, or cryotherapy were the treatment options usually used. CL is prevalent in Al-Madinah Al-Munawarah area and new foci are being introduced. Thus, detailed studies with large surveillances regarding vector and reservoir hosts in and around the area are needed.

  16. Epidemiological Trends of Cutaneous Leishmaniasis in Al-Madinah Al-Munawarah Province, Western Region of Saudi Arabia

    PubMed Central

    Elmekki, Miskelyemen Abdelatti; Elhassan, Mogahid M; Ozbak, Hani A; Qattan, Ilham T; Saleh, Satti M; Alharbi, Ali H

    2017-01-01

    Objective: To investigate the epidemiological trends of cutaneous leishmaniasis (CL) in Al-Madinah Al-Munawarah, western region of KSA. Materials and Methods: Four hundred and sixty-seven parasitologically confirmed CL cases attending Al-Meeqat Hospital, Al-Madinah, during 2012–2015, were included in this study. Results: Both Saudi and non-Saudi nationals were infected, with the highest infection rate being among Saudis (68.7%). Males were more affected than females as 86.9% of the total CL cases were males. Moreover, CL was prevalent in all age groups with higher frequency among young adults and adolescents (23.1% and 22.7%, respectively). Interestingly, almost all the patients in the adolescent and child age groups were Saudis (96.2% and 93.5%, respectively). Considering geographical distribution, the highest percentage of the cases (40.5%) were from the northern parts of Al-Madinah province while the eastern parts reported the least infection rate (7.3%). Few cases (2.5%) were supposed to encounter the infection abroad. Additionally, the frequency of infection was found to follow a seasonal distribution. Regarding treatment, pentostam, ketoconazole, or cryotherapy were the treatment options usually used. Conclusion: CL is prevalent in Al-Madinah Al-Munawarah area and new foci are being introduced. Thus, detailed studies with large surveillances regarding vector and reservoir hosts in and around the area are needed. PMID:29302149

  17. PubMed

    Rivera, Souhail Malavé; Díaz, Nelson Varas

    2006-01-01

    Las profesiones de la salud tienen un papel social dual. Por un lado, velan por el mantenimiento de la salud de la población protegiendo el bien común. Por el otro, dictaminan las formas saludables, y por lo tanto socialmente apropiadas, de ser, actuar y pensar. Este último papel, está más ligado al control social de la población que a una preocupación altruista hacia la misma. A través de esta supervisión y control, se construyen los sujetos a los cuales todos/as debemos aspirar a ser para gozar de aceptación social. Los/as profesionales de la salud han jugado un rol protagónico en dicho proceso, siendo los agentes que delimitan y definen lo que es enfermo vs. saludable, útil vs. inútil, apropiado vs. inapropiado. En el caso de la epidemia del VIH, este esfuerzo se ha hecho cada vez más vigente ya que estos/as profesionales juegan un papel importante en el tratamiento de las personas que viven con VIH/SIDA (PVVS). Sin embargo, su función está plasmada de definiciones que sirven para criminalizar a las PVVS. El objetivo de este estudio fue explorar la manera en que una muestra de profesionales de la salud en Puerto Rico construyen a las PVVS. Con este propósito, entrevistamos 80 profesionales de la salud y estudiantes de estas profesiones. Estas entrevistas fueron grabadas, transcritas y sometidas a un análisis de discurso. Los resultados reflejaron que según las personas participantes: 1) la PVVS no es una persona "normal" o funcional bajo los estándares sociales debido a que su salud no se los permite, 2) representa una carga para la sociedad incluyendo familiares, amigos/as, el mundo del trabajo, e incluso para el gobierno, 3) debe ser vigilada porque representa un riesgo para la persona seronegativa que es descrita como saludable y productiva, y 4) necesita que su salud y conducta sexual sean controladas por vía legal y/o por las personas que representan las instituciones sociales, como lo son los/as profesionales de la salud. En este art

  18. Near ultraviolet InGaN/AlGaN-based light-emitting diodes with highly reflective tin-doped indium oxide/Al-based reflectors.

    PubMed

    Choi, Chang-Hoon; Han, Jaecheon; Park, Jae-Seong; Seong, Tae-Yeon

    2013-11-04

    The enhanced light output power of a InGaN/AlGaN-based light-emitting diodes (LEDs) using three different types of highly reflective Sn-doped indium oxide (ITO)/Al-based p-type reflectors, namely, ITO/Al, Cu-doped indium oxide (CIO)/s-ITO(sputtered)/Al, and Ag nano-dots(n-Ag)/CIO/s-ITO/Al, is presented. The ITO/Al-based reflectors exhibit lower reflectance (76 - 84% at 365 nm) than Al only reflector (91.1%). However, unlike Al only n-type contact, the ITO/Al-based contacts to p-GaN show good ohmic characteristics. Near-UV (365 nm) InGaN/AlGaN-based LEDs with ITO/Al, CIO/s-ITO/Al, and n-Ag/CIO/s-ITO/Al reflectors exhibit forward-bias voltages of 3.55, 3.48, and 3.34 V at 20 mA, respectively. The LEDs with the ITO/Al and CIO/s-ITO/Al reflectors exhibit 9.5% and 13.5% higher light output power (at 20 mA), respectively, than the LEDs with the n-Ag/CIO/s-ITO/Al reflector. The improved performance of near UV LEDs is attributed to the high reflectance and low contact resistivity of the ITO/Al-based reflectors, which are better than those of conventional Al-based reflectors.

  19. Using the Lewis Acid Me3 Si-F-Al(ORF )3 To Prepare Phosphino-Phosphonium Cations with the Least-Coordinating Anion [(RF O)3 Al-F-Al(ORF )3 ].

    PubMed

    Possart, Josephine; Martens, Arthur; Schleep, Mario; Ripp, Alexander; Scherer, Harald; Kratzert, Daniel; Krossing, Ingo

    2017-09-07

    By reaction of two equivalents of Me 3 Si-F-Al(OR F ) 3 1 with an equimolar amount of PPh 2 Cl, the salt [Ph 2 P-PPh 2 Cl] + [(R F O) 3 Al-F-Al(OR F ) 3 ] - 2 is prepared smoothly in 91 % yield (NMR, XRD). The synthesis of [Ph 2 P-PPh 3 ] + [(R F O) 3 Al-F-Al(OR F ) 3 ] - 3 is best achieved by a two-step reaction: first, two equivalents of 1 react with one PPh 3 to give [Me 3 Si-PPh 3 ] + [(R F O) 3 Al-F-Al(OR F ) 3 ] - 4 (NMR, XRD), which, upon reaction with PPh 2 Cl, yields pure 3 and Me 3 SiCl (NMR, XRD). Typically, a stoichiometry of two equivalents of 1 with respect to one equivalent of the chloride donor should be used. Otherwise, the residual strong Lewis acidity of the [(R F O) 3 Al-F-Al(OR F ) 3 ] - anion in the presence of the [F-Al(OR F ) 3 ] - anion-that forms with less than two equivalents of 1-leads to further chloride exchange reactions that complicate work-up. This route presents the easiest way to introduce the least-coordinating [(R F O) 3 Al-F-Al(OR F ) 3 ] - anion into a system. We expect a wide use of this route in all areas, in which chloride-bond heterolysis in combination with very weakly coordinating anions is desirable. Additionally, we performed calculations on the bond dissociation mechanisms of [R 2 P-PMe 3 ] + and the isoelectronic Me 2 P-SiMe 3 and Me 2 Si-PMe 3 in dependence of the solvent permittivity. These calculations show, especially for the neutral reference compounds, a heavy influence of the solvent on the dissociation mechanism, which is why we suggest investigating these properties in solution instead of gas phase. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. Surgery for Gynecomastia in the Islamic Golden Age: Al-Tasrif of Al-Zahrawi (936–1013 AD)

    PubMed Central

    Chavoushi, Seyed Hadi; Ghabili, Kamyar; Kazemi, Abdolhassan; Aslanabadi, Arash; Babapour, Sarah; Ahmedli, Rafail; Golzari, Samad E. J.

    2012-01-01

    The rise of European science during the Renaissance is greatly indebted to the flourishing of the sciences during the Islamic Golden Age. However, some believe that medieval Islamic physicians and in particular surgeons had been merely a medium for Greco-Roman ideas. Contrarily, in some medieval Islamic medical books, such as Al-Tasrif of Al-Zahrawi (936–1013), the surgical instructions represent a change in the usual techniques or are accompanied by a case history, implying that the procedure was actually undertaken. Along with the hundreds of chapters on different diseases and related medical and surgical treatments, Al-Tasrif includes a chapter on surgical techniques for gynecomastia. The present paper is a review of the description of the surgical management of gynecomastia by Al-Zahrawi as well as that of the ancient Greek, medieval, and modern medicine. Although Al-Zahrawi seemed to base his descriptions of surgery for gynecomastia upon those of Paulus of Aegina, his modification of the procedure and application of the medicinal substances might be indicative of Al-Zahrawi's own practice of the procedure. Al-Zahrawi's surgical procedures remained unchanged for many centuries thenceforward until the technological evolution in the recent centuries. PMID:23050167

  1. Identification of phases in the interaction layer between U-Mo-Zr/Al and U-Mo-Zr/Al-Si

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Varela, C.L. Komar; Arico, S.F.; Mirandou, M.

    Out-of-pile diffusion experiments were performed between U-7wt.% Mo-1wt.% Zr and Al or Al A356 (7,1wt.% Si) at 550 deg. C. In this work morphological characterization and phase identification on both interaction layer are presented. They were carried out by the use of different techniques: optical and scanning electron microscopy, X-Ray diffraction and WDS microanalysis. In the interaction layer U-7wt.% Mo-1wt.% Zr/Al, the phases UAl{sub 3}, UAl{sub 4}, Al{sub 20}Mo{sub 2}U and Al{sub 43}Mo{sub 4}U{sub 6} were identified. In the interaction layer U-7wt.% Mo-1wt.% Zr/Al A356, the phases U(Al, Si) with 25at.% Si and Si{sub 5}U{sub 3} were identified. This lastmore » phase, with a higher Si concentration, was identified with XRD Synchrotron radiation performed at the National Synchrotron Light Laboratory (LNLS), Campinas, Brasil. (author)« less

  2. Cenomanian-Turonian biostratigraphy of the Jardas Al Abid area, Al Jabal Al Akhdar, northeast Libya

    NASA Astrophysics Data System (ADS)

    El Qot, Gamal M.; Abdulsamad, Esam O.

    2016-09-01

    The Upper Cenomanian-Turonian succession exposed at Jardas al'Abid area consists mainly of carbonates with siliciclastic intercalations. This succession is subdivided lithostratigraphically into: Qasr al'Abid (Late Cenomanian) and Al Baniyah (Late Cenomanian-Coniacian) formations. This sequence is relatively rich in macrofossil assemblages especially bivalves, gastropods, and echinoids with rare ammonites. Based on the first occurrence (FO) and last occurrence (LO) of some index species of these macrofossil groups, an integrated biostratigraphic framework has been constructed. The studied Cenomanian-Turonian sequence is subdivided biostratigraphically into three ammonite biozones; Pseudaspidoceras pseudonodosoides Total Range Zone, Choffaticeras segne Total Range Zone, and Coilopoceras requienianum Total Range Zone. Based on the rest of macrofossil assemblages other than the ammonites, eight biozones were recognized; Mecaster batnensis Total Range Zone, Ceratostreon flabellatum-Neithea dutrugei Acme Zone, Costagyra olisiponensis Acme Zone, Pycnodonte (Phygraea) vesicularis vesiculosa Acme Zone, Mytiloides labiatus Total Range Zone = Mecaster turonensis Acme Zone, Rachiosoma rectilineatum-Curvostrea rouvillei-Tylostoma (T.) globosum Assemblage Zone, Radiolites sp.-Apricardia? matheroni Total Range Zone, and Nerinea requieniana Total Range Zone. Most of the proposed biozones are recorded for the first time from Libya. The integration among these biozones as well as local and inter-regional correlation of the biozones have been discussed. The stage boundaries of the studied stratigraphic intervals are discussed, where the Cenomanian/Turonian boundary is delineated at the last occurrence (LO) of Pseudaspidoceras pseudonodosoides (Choffat), while the Turonian/Coniacian boundary is delineated arbitrary being agree with the LO of the Turonian fauna.

  3. Cyclic Oxidation of FeCrAlY/Al2O3 Composites

    NASA Technical Reports Server (NTRS)

    Nesbitt, James A.; Draper, Susan L.; Barrett, Charles A.

    1999-01-01

    Three-ply FeCrAlY/Al2O3 composites and FeCrAlY matrix-only samples were cyclically oxidized at 1000 C and 1100 C for up to 1000 1-hr cycles. Fiber ends were exposed at the ends of the composite samples. Following cyclic oxidation, cracks running parallel to and perpendicular to the fibers were observed on the large surface of the composite. In addition, there was evidence of increased scale damage and spallation around the exposed fiber ends, particularly around the middle ply fibers. This damage was more pronounced at the higher temperature. The exposed fiber ends showed cracking between fibers in the outer plies, occasionally with Fe and Cr-rich oxides growing out of the cracks. Large gaps developed at the fiber/matrix interface around many of the fibers, especially those in the outer plies. Oxygen penetrated many of these gaps resulting in significant oxide formation at the fiber/matrix interface far within the composite sample. Around several fibers, the matrix was also internally oxidized showing Al2O3 precipitates in a radial band around the fibers. The results show that these composites have poor cyclic oxidation resistance due to the CTE mismatch and inadequate fiber/matrix bond strength at temperatures of 1000 C and above.

  4. Computational materials design of negative effective U system in the hole-doped Delafossite of CuAlO2, AgAlO2 and AuAlO2

    NASA Astrophysics Data System (ADS)

    Nakanishi, Akitaka; Fukushima, Tetsuya; Uede, Hiroki; Katayama-Yoshida, Hiroshi

    2015-03-01

    In order to realize the super-high-TC superconductors (TC>1,000K) based on the general design rules for the negative Ueff system, we have performed computational materials design for theUeff<0 system in the hole-doped two-dimensional (2D) Delafossite CuAlO2, AgAlO2 and AuAlO2 from the first principles. We find the interesting chemical trend of TC in 2D and 3D systems; where the TC increases exponentially in the weak coupling regime (|Ueff (-0.44eV)|< W(2eV), W is the band width) for hole-doped CuFeS2, then the TC goes through a maximum when |Ueff (-4.88eV, -4.14eV)| ~ W (2.8eV, 3.5eV) for hole-doped AgAlO2 and AuAlO2, and the TC decreases with increasing |Ueff|in strong coupling regime, where |Ueff (-4.53eV)|> W(1.7eV) for hole-doped CuAlO2

  5. Step buffer layer of Al0.25Ga0.75N/Al0.08Ga0.92N on P-InAlN gate normally-off high electron mobility transistors

    NASA Astrophysics Data System (ADS)

    Shrestha, Niraj M.; Li, Yiming; Chang, E. Y.

    2016-07-01

    Normally-off AlGaN/GaN high electron mobility transistors (HEMTs) are indispensable devices for power electronics as they can greatly simplify circuit designs in a cost-effective way. In this work, the electrical characteristics of p-type InAlN gate normally-off AlGaN/GaN HEMTs with a step buffer layer of Al0.25Ga0.75N/Al0.1Ga0.9N is studied numerically. Our device simulation shows that a p-InAlN gate with a step buffer layer allows the transistor to possess normally-off behavior with high drain current and high breakdown voltage simultaneously. The gate modulation by the p-InAlN gate and the induced holes appearing beneath the gate at the GaN/Al0.25Ga0.75N interface is because a hole appearing in the p-InAlN layer can effectively vary the threshold voltage positively. The estimated threshold voltage of the normally-off HEMTs explored is 2.5 V at a drain bias of 25 V, which is 220% higher than the conventional p-AlGaN normally-off AlGaN/GaN gate injection transistor (GIT). Concurrently, the maximum current density of the explored HEMT at a drain bias of 10 V slightly decreases by about 7% (from 240 to 223 mA mm-1). At a drain bias of 15 V, the current density reached 263 mA mm-1. The explored structure is promising owing to tunable positive threshold voltage and the maintenance of similar current density; notably, its breakdown voltage significantly increases by 36% (from 800 V, GIT, to 1086 V). The engineering findings of this study indicate that novel p-InAlN for both the gate and the step buffer layer can feature a high threshold voltage, large current density and high operating voltage for advanced AlGaN/GaN HEMT devices.

  6. Defect characterization of MOCVD grown AlN/AlGaN films on sapphire substrates by TEM and TKD

    NASA Astrophysics Data System (ADS)

    O'Connell, J. H.; Lee, M. E.; Westraadt, J.; Engelbrecht, J. A. A.

    2018-04-01

    High resolution transmission electron microscopy (TEM) has been used to characterize defects structures in AlN/AlGaN epilayers grown by metal-organic chemical vapour deposition (MOCVD) on c-plane sapphire (Al2O3) substrates. The AlN buffer layer was shown to be epitaxially grown on the sapphire substrate with the two lattices rotated relatively through 30°. The AlN layer had a measured thickness of 20-30 nm and was also shown to contain nano-sized voids. The misfit dislocations in the buffer layer have been shown to be pure edge with a spacing of 1.5 nm. TEM characterization of the AlGaN epilayers was shown to contain a higher than expected threading dislocation density of the order 1010 cm-2 as well as the existence of "nanopipes". TEM analysis of the planar lamella for AlGaN has presented evidence for the possibility of columnar growth. The strain and misorientation mapping in the AlGaN epilayer by transmission Kikuchi diffraction (TKD) using the FIB lamella has also been demonstrated to be complimentary to data obtained by TEM imaging.

  7. Comments to Nordmo et al.'s article: effect of hardiness.

    PubMed

    Lucavei, Júlia; Pougnet, Laurence; Dewitte, Jean-Dominique; Loddé, Brice; Pougnet, Richard

    2017-01-01

    We would like to comment on Nordmo et al.'s article on hardiness among Norwegian Royal Navy seamen. The article is very interesting. Understanding the sleep disorders of the military can indeed make it possible to favour the preservation of their health and their competencies. The authors have highlighted the limitations of their study. They will take into account the sleep disorder factors already described in literature, such as: noise, comfort on board, shift organisations, etc. We would like to make two comments: on the one hand, highlight another limit to help future studies; on the other hand, open another perspective of prevention, not described in this article.

  8. Reaction diffusion in the NiCrAl and CoCrAl systems

    NASA Technical Reports Server (NTRS)

    Levine, S. R.

    1978-01-01

    The paper assesses the effect of overlay coating and substrate composition on the kinetics of coating depletion by interdiffusion. This is accomplished by examining the constitution, kinetics and activation energies for a series of diffusion couples primarily of the NiCrAl/Ni-10Cr or CoCrAl/Ni-10Cr type annealed at temperatures in the range 1000-1205 C for times up to 500 hr. A general procedure is developed for analyzing diffusion in multicomponent multiphase systems. It is shown that by introducing the concept of beta-source strength, which can be determined from appropriate phase diagrams, the Wagner solution for consumption of a second phase in a semiinfinite couple is successfully applied to the analysis of MCrAl couples. Thus, correlation of beta-recession rate constants with couple composition, total and diffusional activation energies, and interdiffusion coefficients are determined.

  9. ALS superbend magnet performance

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Marks, Steve; Zbasnik, John; Byrne, Warren

    2001-12-10

    The Lawrence Berkeley National Laboratory has been engaged in the design, construction and testing of four superconducting dipoles (Superbends) that are installed in three arcs of the Advanced Light Source (ALS), with the fourth magnet as a spare. This represents a major upgrade to the ALS providing an enhanced flux and brightness at photon energies above 10 keV. In preparation for installation, an extensive set of tests and measurements have been conducted to characterize the magnetic and cryogenic performance of the Superbends and to fiducialize them for accurate placement in the ALS storage ring. The magnets are currently installed, andmore » the storage ring is undergoing final commissioning. This paper will present the results of magnetic and cryogenic testing.« less

  10. Investigation of partitionless growth of ɛ-Al60Sm11 phase in Al-10 at% Sm liquid

    NASA Astrophysics Data System (ADS)

    Sun, Yang; Ye, Zhuo; Zhang, Feng; Ding, Ze Jun; Wang, Cai-Zhuang; Kramer, Matthew J.; Ho, Kai-Ming

    2018-01-01

    Recent experiments on devitrification of Al90Sm10 amorphous alloys revealed an unusual polymorphic transformation to a complex cubic crystal structure called the ɛ-Al60Sm11 phase. Molecular dynamics simulations of the growth of the stoichiometric ɛ-phase seed in contact with an undercooled Al-10 at% Sm liquid are performed to elucidate the microscopic process of transformation. The as-grown crystal and undercooled liquid possess similar local order around Al atoms whereas a rigid network defined by the Sm sub-lattice develops during the growth. Using a template-cluster alignment method, we define an order parameter to characterize the structural evolution in the system. Estimates of the attachment rate is {R}{{a}}=8.70× {10}-4 Å-2 ns-1 and detachment rate is {R}{{d}}=3.83× {10}-4 Å-2 ns-1 at the interface between ɛ-Al60Sm11 and Al-10 at% Sm liquid at 800 K.

  11. Synthesis and characterization of CuAlO(2) and AgAlO(2) delafossite oxides through low-temperature hydrothermal methods.

    PubMed

    Xiong, Dehua; Zeng, Xianwei; Zhang, Wenjun; Wang, Huan; Zhao, Xiujian; Chen, Wei; Cheng, Yi-Bing

    2014-04-21

    In this work, we present one-step low temperature hydrothermal synthesis of submicrometer particulate CuAlO2 and AgAlO2 delafossite oxides, which are two important p-type transparent conducting oxides. The synthesis parameters that affect the crystal formation processes and the product morphologies, including the selection of starting materials and their molar ratios, the pH value of precursors, the hydrothermal temperature, pressure, and reaction time, have been studied. CuAlO2 crystals have been synthesized from the starting materials of CuCl and NaAlO2 at 320-400 °C, and from Cu2O and Al2O3 at 340-400 °C, respectively. AgAlO2 crystals have been successfully synthesized at the low temperature of 190 °C, using AgNO3 and Al(NO3)3 as the starting materials and NaOH as the mineralizer. The detailed elemental compositions, thermal stability, optical properties, and synthesis mechanisms of CuAlO2 and AgAlO2 also have been studied. Noteworthy is the fact that both CuAlO2 and AgAlO2 can be stabilized up to 800 °C, and their optical transparency can reach 60%-85% in the visible range. Besides, it is believed the crystal formation mechanisms uncovered in the synthesis of CuAlO2 and AgAlO2 will prove insightful guildlines for the preparation of other delafossite oxides.

  12. Als2 mRNA splicing variants detected in KO mice rescue severe motor dysfunction phenotype in Als2 knock-down zebrafish.

    PubMed

    Gros-Louis, Francois; Kriz, Jasna; Kabashi, Edor; McDearmid, Jonathan; Millecamps, Stéphanie; Urushitani, Makoto; Lin, Li; Dion, Patrick; Zhu, Qinzhang; Drapeau, Pierre; Julien, Jean-Pierre; Rouleau, Guy A

    2008-09-01

    Recessive ALS2 mutations are linked to three related but slightly different neurodegenerative disorders: amyotrophic lateral sclerosis, hereditary spastic paraplegia and primary lateral sclerosis. To investigate the function of the ALS2 encoded protein, we generated Als2 knock-out (KO) mice and zAls2 knock-down zebrafish. The Als2(-/-) mice lacking exon 2 and part of exon 3 developed mild signs of neurodegeneration compatible with axonal transport deficiency. In contrast, zAls2 knock-down zebrafish had severe developmental abnormalities, swimming deficits and motor neuron perturbation. We identified, by RT-PCR, northern and western blotting novel Als2 transcripts in mouse central nervous system. These Als2 transcripts were present in Als2 null mice as well as in wild-type littermates and some rescued the zebrafish phenotype. Thus, we speculate that the newly identified Als2 mRNA species prevent the Als2 KO mice from developing severe neurodegenerative disease and might also regulate the severity of the motor neurons phenotype observed in ALS2 patients.

  13. Epitaxial growth of GaN/AlN/InAlN heterostructures for HEMTs in horizontal MOCVD reactors with different designs

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Tsatsulnikov, A. F., E-mail: andrew@beam.ioffe.ru; Lundin, W. V.; Sakharov, A. V.

    2016-09-15

    The epitaxial growth of InAlN layers and GaN/AlN/InAlN heterostructures for HEMTs in growth systems with horizontal reactors of the sizes 1 × 2', 3 × 2', and 6 × 2' is investigated. Studies of the structural properties of the grown InAlN layers and electrophysical parameters of the GaN/AlN/InAlN heterostructures show that the optimal quality of epitaxial growth is attained upon a compromise between the growth conditions for InGaN and AlGaN. A comparison of the epitaxial growth in different reactors shows that optimal conditions are realized in small-scale reactors which make possible the suppression of parasitic reactions in the gas phase.more » In addition, the size of the reactor should be sufficient to provide highly homogeneous heterostructure parameters over area for the subsequent fabrication of devices. The optimal compositions and thicknesses of the InAlN layer for attaining the highest conductance in GaN/AlN/InAlN transistor heterostructures.« less

  14. Multiscale Experimental and Numerical Approach to the Powder Particle Shape Effect on Al-Al2O3 Coating Build-Up

    NASA Astrophysics Data System (ADS)

    Leger, P. E.; Sennour, M.; Delloro, F.; Borit, F.; Debray, A.; Gaslain, F.; Jeandin, M.; Ducos, M.

    2017-10-01

    Aluminum (Al) powders with spherical and irregular particle shapes were mixed with two alumina (Al2O3) powders with either a spherical or an angular particle shape to achieve high-performance cold-sprayed coatings onto steel. Two effects of the aluminum particle shape were observed. First, coating microstructure observation showed impinging heterogeneity depending on particle shape. Second, particle jet differences depending on particle morphology were shown by velocity maps. From the latter, SEM and XRD, three effects of the alumina particle shape were also shown, i.e., higher in-flight velocity of angular particles, fragmentation of spherical hollow particles and embedding of alumina particles with aluminum. Numerical simulation of particle impacts was developed to study the densification of Al coating due to Al2O3 addition through elucidation of Al-Al2O3 interaction behavior at the scale of the coating. Al/Al and Al/Al2O3 interfaces were investigated using TEM to understand coating strengthening effects due to alumina addition at the scale of the particle. As a whole, Al and Al2O3 particle shape effects were claimed to explain coating mechanical properties, e.g., microhardness and coating-substrate bond strength. This study resulted in specifying criteria to help cold spray users in selecting powders for their applications, to meet economic and technical requirements.

  15. Microscopic potential fluctuations in Si-doped AlGaN epitaxial layers with various AlN molar fractions and Si concentrations

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kurai, Satoshi, E-mail: kurai@yamaguchi-u.ac.jp; Yamada, Yoichi; Miyake, Hideto

    2016-01-14

    Nanoscopic potential fluctuations of Si-doped AlGaN epitaxial layers with the AlN molar fraction varying from 0.42 to 0.95 and Si-doped Al{sub 0.61}Ga{sub 0.39}N epitaxial layers with Si concentrations of 3.0–37 × 10{sup 17 }cm{sup −3} were investigated by cathodoluminescence (CL) imaging combined with scanning electron microscopy. The spot CL linewidths of AlGaN epitaxial layers broadened as the AlN molar fraction was increased to 0.7, and then narrowed at higher AlN molar fractions. The experimental linewidths were compared with the theoretical prediction from the alloy broadening model. The trends displayed by our spot CL linewidths were consistent with calculated results at AlN molar fractionsmore » of less than about 0.60, but the spot CL linewidths were markedly broader than the calculated linewidths at higher AlN molar fractions. The dependence of the difference between the spot CL linewidth and calculated line broadening on AlN molar fraction was found to be similar to the dependence of reported S values, indicating that the vacancy clusters acted as the origin of additional line broadening at high AlN molar fractions. The spot CL linewidths of Al{sub 0.61}Ga{sub 0.39}N epitaxial layers with the same Al concentration and different Si concentrations were nearly constant in the entire Si concentration range tested. From the comparison of reported S values, the increase of V{sub Al} did not contribute to the linewidth broadening, unlike the case of the V{sub Al} clusters.« less

  16. Analysis of NiAlTa precipitates in beta-NiAl + 2 at. pct Ta alloy

    NASA Technical Reports Server (NTRS)

    Pathare, V.; Michal, G. M.; Vedula, K.; Nathal, M. V.

    1987-01-01

    Results are reported from experiments performed to identify the precipitates, and their orientation in the matrix, in a beta-NiAl alloy containing 2 at. pct. Ta after undergoing creep test at 1300 K. Test specimens formed by extruding hot powders were compressed at 1300 K for about 50 hr at a strain rate averaging 6/1 million per sec. The specimens were then thinned and examined under an electron microscope and by X-ray diffractometry. An intermetallic NiAlTa compound with a hexagonal Cl4 structure appeared as second phase precipitates in the samples, exhibiting plate-like shapes and a habit plane close to (012). The prism planes of the hexagonal NiAlTa precipitates paralleled the closest packed planes in the cubic beta-NiAl matrix.

  17. Engaging men as promotores de salud: perceptions of community health workers among Latino men in North Carolina.

    PubMed

    Villa-Torres, Laura; Fleming, Paul J; Barrington, Clare

    2015-02-01

    The promotor de salud, or community health worker (CHW) role, is highly feminized and little is known about how men view their participation in CHW programs. We conducted in-depth interviews with Latino men in North Carolina to explore this gap. We used systematic coding and display procedures informed by Grounded Theory to analyze the data. Men described their communities as lacking cohesion, making integration of Latino immigrants difficult. Most did not consider themselves leaders or feel they had leaders in their communities. Their perceptions of the feminized CHW role as well as the volunteer or low-paid nature of CHW work conflicted with men's provider role. They also did not think they could perform the CHW role because they lacked education, skills, and broad networks. Efforts to increase male participation in CHW programs in new Latino immigrant destinations will need to understand and address these gender and migration-related dynamics in order to engage both women and men in improving the health of their communities.

  18. Salud Para Su Corazon-NCLR: a comprehensive Promotora outreach program to promote heart-healthy behaviors among hispanics.

    PubMed

    Balcazar, Hector; Alvarado, Matilde; Hollen, Mary Luna; Gonzalez-Cruz, Yanira; Hughes, Odelinda; Vazquez, Esperanza; Lykens, Kristine

    2006-01-01

    This article describes results of year-1 implementation of the Salud Para Su Corazón (Health For Your Heart)-National Council of la Raza (NCLR) promotora (lay health worker) program for promoting heart-healthy behaviors among Latinos. Findings of this community outreach initiative include data from promotora pledges and self-skill behaviors, cardiovascular disease risk factors of Latino families, family heart-health education delivery, and program costs associated with promotora time. Participation included 29 trained promotoras serving 188 families from three NCLR affiliates in Escondido, California; Chicago, Illinois; and Ojo Caliente, New Mexico. Using several evaluation tools, the results showed that the promotora approach worked based on evidence obtained from the following indicators: changes in promotora's pre-post knowledge and performance skills, progress toward their pledge goals following training, recruiting and teaching families, providing follow-up, and organizing or participating in community events. Strengths and limitations of the promotora model approach are also discussed.

  19. Control of Defects in Aluminum Gallium Nitride ((Al)GaN) Films on Grown Aluminum Nitride (AlN) Substrates

    DTIC Science & Technology

    2013-02-01

    Nord, J.; Albe, K.; Erhart, P.; Nordlund, K. Modelling of Compound Semiconductors: Analytical Bond-order Potential for Gallium , Nitrogen and Gallium ...Control of Defects in Aluminum Gallium Nitride ((Al)GaN) Films on Grown Aluminum Nitride (AlN) Substrates by Iskander G. Batyrev, Chi-Chin Wu...Aluminum Gallium Nitride ((Al)GaN) Films on Grown Aluminum Nitride (AlN) Substrates Iskander G. Batyrev and N. Scott Weingarten Weapons and

  20. A high-temperature neutron diffraction study of Nb 2AlC and TiNbAlC

    DOE PAGES

    Bentzel, Grady W.; Lane, Nina J.; Vogel, Sven C.; ...

    2014-12-16

    In this paper, we report on the crystal structures of Nb 2AlC and TiNbAlC actual composition (Ti 0.45,Nb 0.55) 2AlC compounds determined from Rietveld analysis of neutron diffraction patterns in the 300-1173 K temperature range. The average linear thermal expansion coefficients of a Nb 2AlC sample in the a and c directions are, respectively, 7.9(5)x10 -6 K -1 and 7.7(5)x10 -6 K -1 on one neutron diffractometer and 7.3(3)x10 -6 K -1 and 7.0(2)x10 -6 K -1 on a second diffractometer. The respective values for the (Ti 0.45,Nb 0.55) 2AlC composition - only tested on one diffractometer - are 8.5(3)x10more » -6 K -1 and 7.5(5)x10 -6 K -1. These values are relatively low compared to other MAX phases. Like other MAX phases, however, the atomic displacement parameters show that the Al atoms vibrate with higher amplitudes than the Ti and C atoms, and 1 more along the basal planes than normal to them. In addition, when the predictions of the atomic displacement parameters obtained from density functional theory are compared to the experimental results, good quantitative agreement is found for the Al atoms. In case of the Nb and C atoms, the agreement was more qualitative.« less

  1. Cross-resistance to herbicides of five ALS-inhibiting groups and sequencing of the ALS gene in Cyperus difformis L.

    PubMed

    Merotto, Aldo; Jasieniuk, Marie; Osuna, Maria D; Vidotto, Francesco; Ferrero, Aldo; Fischer, Albert J

    2009-02-25

    Resistance to ALS-inhibiting herbicides in Cyperus difformis has evolved rapidly in many rice areas worldwide. This study identified the mechanism of resistance, assessed cross-resistance patterns to all five chemical groups of ALS-inhibiting herbicides in four C. difformis biotypes, and attempted to sequence the ALS gene. Whole-plant and ALS enzyme activity dose-response assays indicated that the WA biotype was resistant to all ALS-inhibiting herbicides evaluated. The IR biotype was resistant to bensulfuron-methyl, orthosulfamuron, imazethapyr, and propoxycarbazone-sodium and less resistant to bispyribac-sodium and halosulfuron-methyl, and susceptible to penoxsulam. ALS enzyme activity assays indicated that resistance is due to an altered target site yet mutations previously found to endow target-site resistance in weeds were not detected in the sequences obtained. The inability to detect resistance mutations in C. difformis may result from the presence of additional ALS genes, which were not amplified by the primers used. This study reports the first ALS gene sequence from Cyperus difformis. Certain ALS-inhibiting herbicides can still be used to control some resistant C. difformis biotypes. However, because cross-resistance to all five classes of ALS-inhibitors was detected in other resistant biotypes, these herbicides should only be used within an integrated weed management program designed to delay the evolution of herbicide resistance.

  2. Identifying the Distribution of Al 3+ in LiNi 0.8 Co 0.15 Al 0.05 O 2

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Trease, Nicole M.; Seymour, Ieuan D.; Radin, Maxwell D.

    2016-11-22

    The doping of Al into layered Li transition metal (TM) oxide cathode materials, LiTMO 2, is known to improve the structural and thermal stability, although the origin of the enhanced properties is not well understood. The effect of aluminum doping on layer stabilization has been investigated using a combination of techniques to measure the aluminum distribution in layered LiNi 0.8Co 0.15Al 0.05O 2 (NCA) over multiple length scales with 27Al and 7Li MAS NMR, local electrode atom probe (APT) tomography, X-ray and neutron diffraction, DFT, and SQUID magnetic susceptibility measurements. APT ion maps show a homogenous distribution of Ni, Co,more » Al and O 2 throughout the structure at the single particle level in agreement with the high-temperature phase diagram. 7Li and 27Al NMR indicates that the Ni 3+ ions undergo a dynamic Jahn-Teller (JT) distortion. 27Al NMR spectra indicate that the Al reduces the strain associated with the JT distortion, by preferential electronic ordering of the JT long bonds directed toward the Al 3+ ion. The ability to understand the complex atomic and orbital ordering around Al 3+ demonstrated in the current method will be useful for studying the local environment of Al 3+ in a range of transition metal oxide battery materials.« less

  3. Identifying the Distribution of Al 3+ in LiNi 0.8 Co 0.15 Al 0.05 O 2

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Trease, Nicole M.; Seymour, Ieuan D.; Radin, Maxwell D.

    2016-10-07

    The doping of Al into layered Li transition metal (TM) oxide cathode materials, LiTMO 2, is known to improve the structural and thermal stability, although the origin of the enhanced properties is not well understood. We have investigated the effect of aluminum doping on layer stabilization using a combination of techniques to measure the aluminum distribution in layered LiNi 0.8Co 0.15Al 0.05O 2 (NCA) over multiple length scales with 27Al and 7Li MAS NMR, local electron atom probe (LEAP) tomography, X-ray and neutron diffraction, DFT, and SQUID magnetic susceptibility measurements. LEAP tomographic maps show a homogenous distribution of Ni, Co,more » Al and O 2 throughout the structure at the particle level in agreement with the hightemperature phase diagram. 7Li and 27Al NMR indicates that the Ni 3+ ions undergo a dynamic Jahn-Teller (JT) distortion. 27Al NMR spectra indicate that the Al reduces the strain associated with the JT distortion, by preferential electronic ordering of the JT long bonds directed toward the Al 3+ ion. Our ability to understand the complex atomic and orbital ordering around Al 3+ demonstrated in the current method will be useful for studying the local environment of Al 3+ in a range of transition metal oxide battery materials.« less

  4. 77 FR 4082 - Review and Amendment of the Designation of al-Qa'ida in Iraq, et al. as a Foreign Terrorist...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-26

    ... Operations in Iraq, aka al-Qaida of Jihad in Iraq, aka al-Qaida in Iraq, aka al-Qaida in Mesopotamia, aka al... of al-Jihad's Base in the Land of the Two Rivers, aka The Organization Base of Jihad/Mesopotamia, aka...

  5. 75 FR 2920 - In the Matter of the Designation of al-Qa'ida in the Arabian Peninsula (AQAP), Also Known as al...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-19

    ... Known as Tanzim Qa'idat al-Jihad fi Jazirat al- Arab, Also Known as al-Qa'ida Organization in the... Tanzim Qa'idat al- Jihad fi Jazirat al-Arab, also known as al-Qa'ida Organization in the Arabian...

  6. Growth of C60 thin films on Al2O3/NiAl(100) at early stages

    NASA Astrophysics Data System (ADS)

    Hsu, S.-C.; Liao, C.-H.; Hung, T.-C.; Wu, Y.-C.; Lai, Y.-L.; Hsu, Y.-J.; Luo, M.-F.

    2018-03-01

    The growth of thin films of C60 on Al2O3/NiAl(100) at the earliest stage was studied with scanning tunneling microscopy and synchrotron-based photoelectron spectroscopy under ultrahigh-vacuum conditions. C60 molecules, deposited from the vapor onto an ordered thin film of Al2O3/NiAl(100) at 300 K, nucleated into nanoscale rectangular islands, with their longer sides parallel to direction either [010] or [001] of NiAl. The particular island shape resulted because C60 diffused rapidly, and adsorbed and nucleated preferentially on the protrusion stripes of the crystalline Al2O3 surface. The monolayer C60 film exhibited linear protrusions of height 1-3 Å, due to either the structure of the underlying Al2O3 or the lattice mismatch at the boundaries of the coalescing C60 islands; such protrusions governed also the growth of the second layer. The second layer of the C60 film grew only for a C60 coverage >0.60 ML, implying a layer-by-layer growth mode, and also ripened in rectangular shapes. The thin film of C60 was thermally stable up to 400 K; above 500 K, the C60 islands dissociated and most C60 desorbed.

  7. Shock induced reaction of Ni/Al nanopowder mixture.

    PubMed

    Meng, C M; Wei, J J; Chen, Q Y

    2012-11-01

    Nanopowder Ni/Al mixture (mixed in Al:Ni = 2:1 stoichiometry) was shock compressed by employing single and two-stage light gas gun. The particle size of Al and Ni are 100-200 nm and 50-70 nm respectively, morphologies of Al and Ni are sphere like either. Recovered product was characterized by scanning electron microscope (SEM) and X-ray diffraction (XRD) analysis. According to the XRD spectrum, the mixed powder undergo complete reaction under shock compression, reaction product consist of Ni2Al3, NiAl and corundum structure Al2O3 compound. Grain size of Ni-Al compound is less than 100 nm. With the shock pressure increasing, the ratio of Ni2Al3 decreased obviously. The corundum crystal size is 400-500 nm according to the SEM observation. The results of shock recovery experiments and analysis show that the threshold pressure for reaction of nano size powder Ni/Al mixture is much less than that of micro size powder.

  8. MCrAlY bond coat with enhanced yttrium

    DOEpatents

    Jablonski, Paul D.; Hawk, Jeffrey A.

    2016-08-30

    One or more embodiments relates to a method of producing an MCrAlY bond coat comprising an MCrAlY layer in contact with a Y--Al.sub.2O.sub.3 layer. The MCrAlY layer is comprised of a .gamma.-M solid solution, a .beta.-MAl intermetallic phase, and Y-type intermetallics. The Y--Al.sub.2O.sub.3 layer is comprised of Yttrium atoms coordinated with oxygen atoms comprising the Al.sub.2O.sub.3 lattice. The method comprises depositing an MCrAlY material on a substrate, applying an Y.sub.2O.sub.3 paste, and heating the substrate in a non-oxidizing atmosphere at a temperature between 400-1300.degree. C. for a time sufficient to generate the Y--Al.sub.2O.sub.3 layer. Both the MCrAlY layer and the Y--Al.sub.2O.sub.3 layer have a substantial absence of Y.sub.2O.sub.3, YAG, and YAP phases.

  9. 77 FR 4083 - Amendment of the Designation of al-Qa'ida in Iraq, et al. as a Specially Designated Global...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-26

    ... Iraq, aka al-Qaida in Iraq, aka al-Qaida in Mesopotamia, aka al-Qaida in the Land of the Two Rivers... the Two Rivers, aka The Organization Base of Jihad/Mesopotamia, aka The Organization of al-Jihad's...

  10. Al3+ environments in nanostructured ZnAl2O4 and their effects on the luminescence properties.

    PubMed

    da Silva, Alison A; Gonçalves, Agnaldo S; Davolos, Marian R; Santagneli, Silvia H

    2008-11-01

    Single-phase zinc aluminate (ZnAl2O4) with the spinel structure was successfully obtained by the Pechini method at different calcining temperatures for 4 hours. The nanoparticles are highly crystalline with no impurities related to ZnO or Al2O3 residues. The microstructural environment of aluminium ions changes with heat treatment temperature, as observed by Fourier transform infrared spectroscopy. The spinel structure might present two different AlO6 sites as evidenced by 27Al solid-state magic-angle-spinning nuclear magnetic resonance spectra. Some AlO4 sites were also detected for samples calcined at a temperature lower than 900 degrees C. The photoluminescence spectra show that the emission can be tuned depending on the calcining temperature. This effect was discussed on the basis of symmetry and oxygen vacancies.

  11. Development of B2 Shape Memory Intermetallics Beyond NiAl, CoNiAl and CoNiGa

    NASA Astrophysics Data System (ADS)

    Gerstein, G.; Firstov, G. S.; Kosorukova, T. A.; Koval, Yu. N.; Maier, H. J.

    2018-06-01

    The present study describes the development of shape memory alloys based on NiAl. Initially, this system was considered a promising but unsuccessful neighbour of NiTi. Later, however, shape memory alloys like CoNiAl or CoNiGa were developed that can be considered as NiAl derivatives and already demonstrated good mechanical properties. Yet, these alloys were still inferior to NiTi in most respects. Lately, using a multi-component approach, a CoNiCuAlGaIn high entropy intermetallic compound was developed from the NiAl prototype. This new alloy featured a B2 phase and a martensitic transformation along with a remarkable strength in the as-cast state. In the long-term, this new approach might led to a breakthrough for shape memory alloys in general.

  12. Cathodoluminescence study on local high-energy emissions at dark spots in AlGaN/AlGaN multiple quantum wells

    NASA Astrophysics Data System (ADS)

    Kurai, Satoshi; Imura, Nobuto; Jin, Li; Miyake, Hideto; Hiramatsu, Kazumasa; Yamada, Yoichi

    2018-06-01

    We investigated the spatial distribution of luminescence near threading dislocations in AlGaN/AlGaN multiple quantum wells (MQWs) by cathodoluminescence mapping. Emission at the higher-energy side of the AlGaN MQW peak was locally observed near the threading dislocations, which were not accompanied by any surface V-pits. Such higher-energy emission was not observed in the AlGaN epilayers. The energy difference between the AlGaN MQW peak and the higher-energy emission peak increased with increasing barrier-layer Al composition. These results suggest that the origin of the higher-energy emission is likely local thickness fluctuation around dislocations in very thin AlGaN MQWs.

  13. Temperature dependent DC characterization of InAlN/(AlN)/GaN HEMT for improved reliability

    NASA Astrophysics Data System (ADS)

    Takhar, K.; Gomes, U. P.; Ranjan, K.; Rathi, S.; Biswas, D.

    2015-02-01

    InxAl1-xN/AlN/GaN HEMT device performance is analysed at various temperatures with the help of physics based 2-D simulation using commercially available BLAZE and GIGA modules from SILVACO. Various material parameters viz. band-gap, low field mobility, density of states, velocity saturation, and substrate thermal conductivity are considered as critical parameters for predicting temperature effect in InxAl1-xN/AlN/GaN HEMT. Reduction in drain current and transconductance has been observed due to the decrease of 2-DEG mobility and effective electron velocity with the increase in temperature. Degradation in cut-off frequency follows the transconductance profile as variation in gate-source/gate-drain capacitances observed very small.

  14. Using Job Analysis Techniques to Understand Training Needs for Promotores de Salud.

    PubMed

    Ospina, Javier H; Langford, Toshiko A; Henry, Kimberly L; Nelson, Tristan Q

    2018-04-01

    Despite the value of community health worker programs, such as Promotores de Salud, for addressing health disparities in the Latino community, little consensus has been reached to formally define the unique roles and duties associated with the job, thereby creating unique job training challenges. Understanding the job tasks and worker attributes central to this work is a critical first step for developing the training and evaluation systems of promotores programs. Here, we present the process and findings of a job analysis conducted for promotores working for Planned Parenthood. We employed a systematic approach, the combination job analysis method, to define the job in terms of its work and worker requirements, identifying key job tasks, as well as the worker attributes necessary to effectively perform them. Our results suggest that the promotores' job encompasses a broad range of activities and requires an equally broad range of personal characteristics to perform. These results played an important role in the development of our training and evaluation protocols. In this article, we introduce the technique of job analysis, provide an overview of the results from our own application of this technique, and discuss how these findings can be used to inform a training and performance evaluation system. This article provides a template for other organizations implementing similar community health worker programs and illustrates the value of conducting a job analysis for clarifying job roles, developing and evaluating job training materials, and selecting qualified job candidates.

  15. Luminescence of Eu:Y3Al5O12, Eu:Lu3Al5O12, and Eu:GdAlO3 Nanocrystals Synthesized by Solution Combustion

    NASA Astrophysics Data System (ADS)

    Vilejshikova, E. V.; Khort, A. A.; Podbolotov, K. B.; Loiko, P. A.; Shimanski, V. I.; Shashkov, S. N.; Yumashev, K. V.

    2017-11-01

    Nanocrystals of rare-earth garnets Y3Al5O12 and Lu3Al5O12 and perovskite GdAlO3 highly doped (10-20 at%) with Eu3+ are synthesized by the solution combustion technique and subsequent annealing in air at 800 and 1300oC. Their structure, morphology, and phase composition are studied. These materials exhibit intense red luminescence under UV excitation. Eu:GdAlO3 luminescence has CIE 1931 color coordinates (0.632, 0.368); dominant wavelength, 599.6 nm; and color purity, >99%. Judd-Ofelt parameters, luminescence branching ratios, and lifetimes of the Eu3+ 5D0 state are determined. The luminescence quantum yield for Eu:GdAlO3 (10 at%) reaches 74% with a lifetime of 1.4 ms for the 5D0 state. The synthesized materials are promising for red ceramic phosphors.

  16. The oxidation of Ni-rich Ni-Al intermetallics

    NASA Technical Reports Server (NTRS)

    Doychak, Joseph; Smialek, James L.; Barrett, Charles A.

    1988-01-01

    The oxidation of Ni-Al intermetallic alloys in the beta-NiAl phase field and in the two phase beta-NiAl/gamma'-Ni3Al phase field has been studied between 1000 and 1400 C. The stoichiometric beta-NiAl alloy doped with Zr was superior to other alloy compositions under cyclic and isothermal oxidation. The isothermal growth rates did not increase monotonically as the alloy Al content was decreased. The characteristically ridged alpha-Al2O3 scale morphology, consisting of cells of thin, textured oxide with thick growth ridges at cell boundaries, forms on oxidized beta-NiAl alloys. The correlation of scale features with isothermal growth rates indicates a predominant grain boundary diffusion growth mechanism. The 1200 C cyclic oxidation resistance decreases near the lower end of the beta-NiAl phase field.

  17. Chemical Bonding of AlH3 Hydride by Al-L2,3 Electron Energy-Loss Spectra and First-Principles Calculations

    PubMed Central

    Tatsumi, Kazuyoshi; Muto, Shunsuke; Ikeda, Kazutaka; Orimo, Shin-Ichi

    2012-01-01

    In a previous study, we used transmission electron microscopy and electron energy-loss (EEL) spectroscopy to investigate dehydrogenation of AlH3 particles. In the present study, we systematically examine differences in the chemical bonding states of Al-containing compounds (including AlH3) by comparing their Al-L2,3 EEL spectra. The spectral chemical shift and the fine peak structure of the spectra were consistent with the degree of covalent bonding of Al. This finding will be useful for future nanoscale analysis of AlH3 dehydrogenation toward the cell. PMID:28816996

  18. Overdamped Nb/Al-AlO{sub x}/Nb Josephson junctions

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lacquaniti, V.; Cagliero, C.; Maggi, S.

    2005-01-24

    We report the fabrication and characterization of overdamped Nb/Al-AlO{sub x}/Nb superconductor-insulator-superconductor Josephson junction whose fabrication process derives from that of the well-known hysteretic junctions. These junctions are an intermediate state between the superconductor-normal metal-superconductor and the superconductor-insulator-superconductor Josephson junctions. Stable and reproducible nonhysteretic current-voltage characteristics are obtained with a proper choice of the fabrication parameters. We have measured critical current densities J{sub C} from 10{sup 3} up to 2x10{sup 4} A/cm{sup 2}, with characteristic voltages from 80 to nearly 450 {mu}V. The junctions are stable against time and repeated thermal cycling.

  19. Influence of Al content on non-equilibrium solidification behavior of Ni-Al-Ta model single crystal alloys

    NASA Astrophysics Data System (ADS)

    Ai, Cheng; Zhou, Jian; Zhang, Heng; Zhao, Xinbao; Pei, Yanling; Li, Shusuo; Gong, Shengkai

    2016-01-01

    The non-equilibrium solidification behaviors of five Ni-Al-Ta ternary model single crystal alloys with different Al contents were investigated by experimental analysis and theoretical calculation (by JMatPro) in this study. These model alloys respectively represented the γ' phase with various volume fractions (100%, 75%, 50%, 25% and 0%) at 900 °C. It was found that with decreasing Al content, liquidus temperature of experimental alloys first decreased and then increased. Meanwhile, the solidification range showed a continued downward trend. In addition, with decreasing Al content, the primary phases of non-equilibrium solidified model alloys gradually transformed from γ' phase to γ phase, and the area fraction of which first decreased and then increased. Moreover, the interdendritic/intercellular precipitation of model alloys changed from β phase (for 100% γ') to (γ+γ')Eutectic (for 75% γ'), (γ+γ')Eutectic+γ' (for 50% γ' and 25% γ') and none interdendritic precipitation (for 0% γ'), and the last stage non-equilibrium solidification sequence of model alloys was determined by the nominal Al content and different microsegregation behaviors of Al element.

  20. Forward Current Transport Mechanisms of Ni/Au—InAlN/AlN/GaN Schottky Diodes

    NASA Astrophysics Data System (ADS)

    Wang, Xiao-Feng; Shao, Zhen-Guang; Chen, Dun-Jun; Lu, Hai; Zhang, Rong; Zheng, You-Dou

    2014-05-01

    We fabricate two Ni/Au-In0.17Al0.83N/AlN/GaN Schottky diodes on substrates of sapphire and Si, respectively, and investigate their forward-bias current transport mechanisms by temperature-dependent current-voltage measurements. In the temperature range of 300-485 K, the Schottky barrier heights (SBHs) calculated by using the conventional thermionic-emission (TE) model are strongly positively dependent on temperature, which is in contrast to the negative-temperature-dependent characteristic of traditional semiconductor Schottky diodes. By fitting the forward-bias I-V characteristics using different current transport models, we find that the tunneling current model can describe generally the I-V behaviors in the entire measured range of temperature. Under the high forward bias, the traditional TE mechanism also gives a good fit to the measured I-V data, and the actual barrier heights calculated according to the fitting TE curve are 1.434 and 1.413 eV at 300K for InAlN/AlN/GaN Schottky diodes on Si and the sapphire substrate, respectively, and the barrier height shows a slightly negative temperature coefficient. In addition, a formula is given to estimate SBHs of Ni/Au—InAlN/AlN/GaN Schottky diodes taking the Fermi-level pinning effect into account.

  1. Using intervention mapping to develop a breast and cervical cancer screening program for Hispanic farmworkers: Cultivando La Salud.

    PubMed

    Fernández, Maria E; Gonzales, Alicia; Tortolero-Luna, Guillermo; Partida, Sylvia; Bartholomew, L Kay

    2005-10-01

    This article describes the development of the Cultivando La Salud program, an intervention to increase breast and cervical cancer screening for Hispanic farmworker women. Processes and findings of intervention mapping (IM), a planning process for development of theory and evidence-informed program are discussed. The six IM steps are presented: needs assessment, preparation of planning matrices, election of theoretic methods and practical strategies, program design, implementation planning, and evaluation. The article also describes how qualitative and quantitative findings informed intervention development. IM helped ensure that theory and evidence guided (a) the identification of behavioral and environmental factors related to a target health problem and (b) the selection of the most appropriate methods and strategies to address the identified determinants. IM also guided the development of program materials and implementation by lay health workers. Also reported are findings of the pilot study and effectiveness trial.

  2. Improved Energetic-Behaviors of Spontaneously Surface-Mediated Al Particles.

    PubMed

    Kim, Dong Won; Kim, Kyung Tae; Min, Tae Sik; Kim, Kyung Ju; Kim, Soo Hyung

    2017-07-05

    Surface-mediated Al particles are synthesized by incorporating the stable fluoride reaction of Al-F on a pure Al surface in place of natural oxides. Al particles with fluoro-polymer directly adsorbed on the surface show a considerable capability to overcome limitations caused by the surface oxide. Here, we report that Al fluoride when spontaneously formed at the poly(vinylidene fluoride)/Al interface serves as an oxidation-protecting layer while also providing an efficient combustion path along which the internal Al rapidly reacts with external oxygen atoms. Both thermal oxidation and explosion tests of the poly(vinylidene fluoride)/Al particles show superior exothermic enthalpy energy and simultaneously rapid oxidation reactivity compared to those of Al 2 O 3 passivated Al particles. It is clearly elucidated that the enhanced energetic properties of Al particles mediated by poly(vinylidene fluoride) originate from the extraordinary pyrolytic process of Al fluoride occurring at a low temperature compared to Al 2 O 3 passivated Al. Hence, these results clarify that the surface mediation of Al particles can be significantly considered as advanced technology for many energetic applications.

  3. Temperature-dependent OSL properties of nano-phosphors LiAlO2:C and α-Al2O3:C

    NASA Astrophysics Data System (ADS)

    Agarwal, Mini; Garg, Sandeep K.; Asokan, K.; Kumar, Pratik

    2018-06-01

    The present study focuses on the synthesis and characterization of carbon doped nano-phosphors, LiAlO2 and α-Al2O3 and their temperature-dependent optically stimulated luminescence (TA-OSL) characteristics in the temperature ranges of 25-350 °C. These nano-phosphors with the carbon concentration of 0.01 mol% exhibits high luminescent intensity for LiAlO2:C in the low dose range of 1 mGy-7 Gy and for α-Al2O3:C in the range of 100 mGy-1 kGy. Both these nano-phosphors are of polycrystalline in nature, having grain size 15-50 nm as confirmed by the X-ray diffraction (XRD) and Transmission Electron Microscopy (TEM), respectively. The maximum TA-OSL intensities are observed at 125 °C for LiAlO2:C and 200 °C for Al2O3:C, and reveal the presence of deep defect centres. The Arrhenius analysis shows the activation energies Ea = 0.06 ± 0.02 eV for LiAlO2:C and Ea = 0.04 ± 0.01 eV, & Eb = 0.48 ± 0.07 eV for Al2O3:C. The TA-OSL and OSL characteristics are discussed with special reference to the medical and high radiation dosimetry. These compounds, LiAlO2:C and α-Al2O3:C, are non-toxic, robust and are potential candidates for reusable dosimetry.

  4. Genotypic differences in Al resistance and the role of cell-wall pectin in Al exclusion from the root apex in Fagopyrum tataricum

    PubMed Central

    Yang, Jian Li; Zhu, Xiao Fang; Zheng, Cheng; Zhang, Yue Jiao; Zheng, Shao Jian

    2011-01-01

    Background and Aims Aluminium (Al) toxicity is one of the factors limiting crop production on acid soils. However, genotypic differences exist among plant species or cultivars in response to Al toxicity. This study aims to investigate genotypic differences among eight cultivars of tatary buckwheat (Fagopyrum tataricum) for Al resistance and explore the possible mechanisms of Al resistance. Methods Al resistance was evaluated based on relative root elongation (root elongation with Al/root elongation without Al). Root apex Al content, pectin content and exudation of root organic acids were determined and compared. Key Results Genotypic differences among the eight cultivars were correlated with exclusion of Al from the root apex. However, there was a lack of correlation between Al exclusion and Al-induced oxalate secretion. Interestingly, cell-wall pectin content of the root apex was generally lower in Al-resistant cultivars than in Al-sensitive cultivars. Although we were unable to establish a significant correlation between Al exclusion and pectin content among the eight cultivars, a strong correlation could be established among six cultivars, in which the pectin content in the most Al-resistant cultivar ‘Chuan’ was significantly lower than that in the most Al-sensitive cultivar ‘Liuku2’. Furthermore, root apex cell-wall pectin methylesterase activity (PME) was similar in ‘Chuan’ and ‘Liuku2’ in the absence of Al, but Al treatment resulted in increased PME activity in ‘Liuku2’ compared with ‘Chuan’. Immunolocalization of pectins also showed that the two cultivars had similar amounts of either low-methyl-ester pectins or high-methyl-ester pectins in the absence of Al, but Al treatment resulted in a more significant increase of low-methyl-ester pectins and decrease of high-methyl-ester pectins in ‘Liuku2’. Conclusions Cell-wall pectin content may contribute, at least in part, to differential Al resistance among tatary buckwheat cultivars

  5. Seguridad Laboral al Usar Pesticidas

    EPA Pesticide Factsheets

    Para proteger a la gente que trabaja con pesticidas y quienes laboran en áreas tratadas con pesticidas; para educar al personal médico y al público acerca de cómo reconocer y tratar las enfermedades relacionadas a los pesticidas.

  6. Fosetyl-al

    Integrated Risk Information System (IRIS)

    Integrated Risk Information System ( IRIS ) Chemical Assessment Summary U.S . Environmental Protection Agency National Center for Environmental Assessment This IRIS Summary has been removed from the IRIS database and is available for historical reference purposes . ( July 2016 ) Fosetyl - al ; CASRN

  7. Sporadic and hereditary amyotrophic lateral sclerosis (ALS).

    PubMed

    Ajroud-Driss, Senda; Siddique, Teepu

    2015-04-01

    Genetic discoveries in ALS have a significant impact on deciphering molecular mechanisms of motor neuron degeneration. The identification of SOD1 as the first genetic cause of ALS led to the engineering of the SOD1 mouse, the backbone of ALS research, and set the stage for future genetic breakthroughs. In addition, careful analysis of ALS pathology added valuable pieces to the ALS puzzle. From this joint effort, major pathogenic pathways emerged. Whereas the study of TDP43, FUS and C9ORF72 pointed to the possible involvement of RNA biology in motor neuron survival, recent work on P62 and UBQLN2 refocused research on protein degradation pathways. Despite all these efforts, the etiology of most cases of sporadic ALS remains elusive. Newly acquired genomic tools now allow the identification of genetic and epigenetic factors that can either increase ALS risk or modulate disease phenotype. These developments will certainly allow for better disease modeling to identify novel therapeutic targets for ALS. This article is part of a Special Issue entitled: Neuromuscular Diseases: Pathology and Molecular Pathogenesis. Copyright © 2014 Elsevier B.V. All rights reserved.

  8. Formation of (Ti,Al)N/Ti{sub 2}AlN multilayers after annealing of TiN/TiAl(N) multilayers deposited by ion beam sputtering

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Dolique, V.; Jaouen, M.; Cabioc'h, T.

    2008-04-15

    By using ion beam sputtering, TiN/TiAl(N) multilayers of various modulation wavelengths ({lambda}=8, 13, and 32 nm) were deposited onto silicon substrates at room temperature. After annealing at 600 deg. C in vacuum, one obtains for {lambda}=13 nm a (Ti,Al)N/Ti{sub 2}AlN multilayer as it is evidenced from x-ray diffraction, high resolution transmission electron microscopy, and energy filtered electron imaging experiments. X-ray photoelectron spectroscopy (XPS) experiments show that the as-deposited TiAl sublayers contain a noticeable amount of nitrogen atoms which mean concentration varies with the period {lambda}. They also evidenced the diffusion of aluminum into TiN sublayers after annealing. Deduced from thesemore » observations, we propose a model to explain why this solid-state phase transformation depends on the period {lambda} of the multilayer.« less

  9. An Alternative Perspective on von Winterfeldt et al.'s (1997) Test of Consequence Monotonicity

    ERIC Educational Resources Information Center

    Ho, Moon-Ho R.; Regenwetter, Michel; Niederee, Reinhard; Heyer, Dieter

    2005-01-01

    D. von Winterfeldt, N.-K. Chung, R. D. Luce, and Y. Cho (see record 1997-03378-008) provided several tests for consequence monotonicity of choice or judgment, using certainty equivalents of gambles. The authors reaxiomatized consequence monotonicity in a probabilistic framework and reanalyzed von Winterfeldt et al.'s main experiment via a…

  10. Hydrometric, Hydrochemical, and Hydrogeophysical Runoff Characterization Across Multiple Land Covers in the Agua Salud Project, Panama

    NASA Astrophysics Data System (ADS)

    Litt, Guy Finley

    As the Panama Canal Authority faces sensitivity to water shortages, managing water resources becomes crucial for the global shipping industry's security. These studies address knowledge gaps in tropical water resources to aid hydrological model development and validation. Field-based hydrological investigations in the Agua Salud Project within the Panama Canal Watershed employed multiple tools across a variety of land covers to investigate hydrological processes. Geochemical tracers informed where storm runoff in a stream comes from and identified electrical conductivity (EC) as an economical, high sample frequency tracer during small storms. EC-based hydrograph separation coupled with hydrograph recession rate analyses identified shallow and deep groundwater storage-discharge relationships that varied by season and land cover. A series of plot-scale electrical resistivity imaging geophysical experiments coupled with rainfall simulation characterized subsurface flow pathway behavior and quantified respectively increasing infiltration rates across pasture, 10 year old secondary succession forest, teak (tectona grandis), and 30 year old secondary succession forest land covers. Additional soil water, groundwater, and geochemical studies informed conceptual model development in subsurface flow pathways and groundwater, and identified future research needs.

  11. Ti2Al(C, N) Solid Solution Reinforcing TiAl-Based Composites: Evolution of a Core-Shell Structure, Interfaces, and Mechanical Properties.

    PubMed

    Song, Xiaojie; Cui, Hongzhi; Han, Ye; Ding, Lei; Song, Qiang

    2018-05-16

    In this work, Ti 2 Al(C, N) solid solution with lamellar structure-enhanced TiAl matrix composites was synthesized by vacuum arc melting, using bulk g-C 3 N 4 , Ti, and Al powders as raw materials. The phases, microstructures, interfaces, and mechanical properties were investigated. MAX phase of Ti 2 Al(C, N) solid solution with lamellar structure was formed. During the melting process, first, C 3 N 4 reacted with Ti to form Ti(C, N) by Ti + C 3 N 4 → Ti(C, N). Then Ti 2 Al(C, N) was formed by a peritectic reaction of TiAl(l) + Ti(C, N)(s) → Ti 2 Al(C, N). C 3 N 4 is the single reactant that provides C and N simultaneously to final product of Ti 2 Al(C, N). The interfaces of TiAl//Ti 2 Al(C, N) and Ti 2 Al(C, N)//Ti(C, N) display perfect orientation relationships with low misfit values. The microhardness, compressive strength, and strain of best-performing TiAl-10 mol % Ti 2 Al(C, N) composite were improved by 45%, 55.7%, and 50% compared with the TiAl alloy, respectively. Uniformly distributed Ti 2 Al(C, N) and unreacted Ti(C, N) particles contributed to the grain refinement and reinforcement of the TiAl matrix. Laminated tearing, particle pull-out, and the crack-arresting of Ti 2 Al(C, N) are crucial for the improvement in compressive strength and plasticity of the composites.

  12. [Al-Biruni--a universal scientist].

    PubMed

    Kujundzić, E; Masić, I

    1999-01-01

    Al-Biruni's was of Persian descent. He was born in Horesmiya and had studied mathematics, history and medicine. Acquiring knowledge from these sciences, he wrote an outstanding work on chronology of several nations and devoted it to Ziyarit ruler Kabus. He made a chronological overview of calendars from many nations, including Persians, Greeks, Egyptians, Jews, Melkitian and Nestorian Christians, Sabeyaans as well as the old Arabs. Data presented in the work, according to the later authors, were taken from very reliable sources. He was contemporary of Ibn-Sina, and thanks to their friendship, they have discussed very much miscellaneous topics. He belonged to the group of scholars, taken by Gaznevian Soultan Mahmud to a long journey to India. Afterwards Al-Biruni wrote and published detailed work "Description of India"--a work on cultural history of India. Due to excellent abilities of Al-Biruni as a philosopher and scholar, there are still significant and reliable notes about buddhistic philosophy, structure of castes and Brahmans' life style. In this Al-Biruni's masterpiece, there are many comparative analysis of Suffism and certain Indian philosophical methods. Al-Biruni's most important work is "Pharmacopoeia"--"Kitab al-saydala", which brilliantly describes all medicaments. This work has been published in many languages. He also wrote few works on astronomy and astrology. In those works he has explained some astrological events through scientific approach in a such peculiar way that nobody has ever explained before. He was also interested in sciences like geology, mineralology, geography, mathematics, psychology and many others.

  13. Als1 and Als3 regulate the intracellular uptake of copper ions when Candida albicans biofilms are exposed to metallic copper surfaces.

    PubMed

    Zheng, Sha; Chang, Wenqiang; Li, Chen; Lou, Hongxiang

    2016-05-01

    Copper surfaces possess efficient antimicrobial effect. Here, we reported that copper surfaces could inactivate Candida albicans biofilms within 40 min. The intracellular reactive oxygen species in C. albicans biofilms were immediately stimulated during the contact of copper surfaces, which might be an important factor for killing the mature biofilms. Copper release assay demonstrated that the copper ions automatically released from the surface of 1 mm thick copper coupons with over 99.9% purity are not the key determinant for the copper-mediated killing action. The susceptibility test to copper surfaces by using C. albicans mutant strains, which were involved in efflux pumps, adhesins, biofilms formation or osmotic stress response showed that als1/als1 and als3/als3 displayed higher resistance to the copper surface contact than other mutants did. The intracellular concentration of copper ions was lower in als1/als1 and als3/als3 than that in wild-type strain. Transcriptional analysis revealed that the expression of copper transporter-related gene, CRP1, was significantly increased in als1/als1, als3/als3, suggesting a potential role of ALS1 and ALS3 in absorbing ions by regulating the expression of CRP1 This study provides a potential application in treating pathogenic fungi by using copper surfaces and uncovers the roles of ALS1 and ALS3 in absorbing copper ions for C. albicans. © FEMS 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  14. Cryptanalysis and improvement of Yan et al.'s biometric-based authentication scheme for telecare medicine information systems.

    PubMed

    Mishra, Dheerendra; Mukhopadhyay, Sourav; Chaturvedi, Ankita; Kumari, Saru; Khan, Muhammad Khurram

    2014-06-01

    Remote user authentication is desirable for a Telecare Medicine Information System (TMIS) for the safety, security and integrity of transmitted data over the public channel. In 2013, Tan presented a biometric based remote user authentication scheme and claimed that his scheme is secure. Recently, Yan et al. demonstrated some drawbacks in Tan's scheme and proposed an improved scheme to erase the drawbacks of Tan's scheme. We analyze Yan et al.'s scheme and identify that their scheme is vulnerable to off-line password guessing attack, and does not protect anonymity. Moreover, in their scheme, login and password change phases are inefficient to identify the correctness of input where inefficiency in password change phase can cause denial of service attack. Further, we design an improved scheme for TMIS with the aim to eliminate the drawbacks of Yan et al.'s scheme.

  15. RHEED and EELS study of Pd/Al bimetallic thin film growth on different α-Al 2O 3 substrates

    NASA Astrophysics Data System (ADS)

    Moroz, V.; Rajs, K.; Mašek, K.

    2002-06-01

    Pd/Al bimetallic thin films were grown by molecular beam epitaxy on single-crystalline α-Al 2O 3(0 0 0 1) and (1 1 2¯ 0) surfaces. Substrate and deposit crystallographic structures and evolution of deposit lattice parameter during the growth were studied by reflection high-energy electron diffraction. The electron energy loss spectroscopy was used as an auxiliary method for chemical analysis. The bimetallic films were prepared by successive deposition of both Pd and Al metals. The structure of Pd and Al deposits in early stages of the growth and its dependence on the preparation conditions were studied. Two phases of Pd clusters covered by Al overlayer have been found. The formation of Al overlayer strongly influenced the lattice parameter of Pd clusters.

  16. SiO2/AlON stacked gate dielectrics for AlGaN/GaN MOS heterojunction field-effect transistors

    NASA Astrophysics Data System (ADS)

    Watanabe, Kenta; Terashima, Daiki; Nozaki, Mikito; Yamada, Takahiro; Nakazawa, Satoshi; Ishida, Masahiro; Anda, Yoshiharu; Ueda, Tetsuzo; Yoshigoe, Akitaka; Hosoi, Takuji; Shimura, Takayoshi; Watanabe, Heiji

    2018-06-01

    Stacked gate dielectrics consisting of wide bandgap SiO2 insulators and thin aluminum oxynitride (AlON) interlayers were systematically investigated in order to improve the performance and reliability of AlGaN/GaN metal–oxide–semiconductor (MOS) devices. A significantly reduced gate leakage current compared with that in a single AlON layer was achieved with these structures, while maintaining the superior thermal stability and electrical properties of the oxynitride/AlGaN interface. Consequently, distinct advantages in terms of the reliability of the gate dielectrics, such as an improved immunity against electron injection and an increased dielectric breakdown field, were demonstrated for AlGaN/GaN MOS capacitors with optimized stacked structures having a 3.3-nm-thick AlON interlayer.

  17. Influence of impact speed on water droplet erosion of TiAl compared with Ti6Al4V

    PubMed Central

    Mahdipoor, M.S.; Kirols, H.S.; Kevorkov, D.; Jedrzejowski, P.; Medraj, M.

    2015-01-01

    Water Droplet Erosion (WDE) as a material degradation phenomenon has been a concern in power generation industries for decades. Steam turbine blades and the compressor blades of gas turbines that use water injection usually suffer from WDE. The present work focuses on studying erosion resistance of TiAl as a potential alloy for turbine blades compared to Ti6Al4V, a frequently used blade alloy. Their erosion behaviour is investigated at different droplet impact speeds to determine the relation between erosion performance and impact speed. It is found that the relationship is governed by a power law equation, ER ~ Vn, where the speed exponent is 7–9 for Ti6Al4V and 11–13 for TiAl. There is a contrast between the observed speed exponent in this work and the ones reported in the literature for Ti6Al4V. It is attributed to the different erosion setups and impingement conditions such as different droplet sizes. To verify this, the erosion experiments were performed at two different droplet sizes, 464 and 603 μm. TiAl showed superior erosion resistance in all erosion conditions; however, its erosion performance exhibits higher sensitivity to the impact speed compared to Ti6Al4V. It means that aggressive erosion conditions decrease the WDE resistance superiority of TiAl. PMID:26391370

  18. Influence of impact speed on water droplet erosion of TiAl compared with Ti6Al4V.

    PubMed

    Mahdipoor, M S; Kirols, H S; Kevorkov, D; Jedrzejowski, P; Medraj, M

    2015-09-22

    Water Droplet Erosion (WDE) as a material degradation phenomenon has been a concern in power generation industries for decades. Steam turbine blades and the compressor blades of gas turbines that use water injection usually suffer from WDE. The present work focuses on studying erosion resistance of TiAl as a potential alloy for turbine blades compared to Ti6Al4V, a frequently used blade alloy. Their erosion behaviour is investigated at different droplet impact speeds to determine the relation between erosion performance and impact speed. It is found that the relationship is governed by a power law equation, ER ~ V(n), where the speed exponent is 7-9 for Ti6Al4V and 11-13 for TiAl. There is a contrast between the observed speed exponent in this work and the ones reported in the literature for Ti6Al4V. It is attributed to the different erosion setups and impingement conditions such as different droplet sizes. To verify this, the erosion experiments were performed at two different droplet sizes, 464 and 603 μm. TiAl showed superior erosion resistance in all erosion conditions; however, its erosion performance exhibits higher sensitivity to the impact speed compared to Ti6Al4V. It means that aggressive erosion conditions decrease the WDE resistance superiority of TiAl.

  19. The Evolution of Al Qaeda

    DTIC Science & Technology

    2007-06-15

    Al Qaeda is a product of the forces of globalization. Increasing access to global finances , international travel, and sophisticated technology is...evolution. Al Qaeda is a product of the forces of globalization. Increasing access to global finances , international travel, and sophisticated technology...75 Finance

  20. Ti, Al and N adatom adsorption and diffusion on rocksalt cubic AlN (001) and (011) surfaces: Ab initio calculations

    NASA Astrophysics Data System (ADS)

    Mastail, C.; David, M.; Nita, F.; Michel, A.; Abadias, G.

    2017-11-01

    We use ab initio calculations to determine the preferred nucleation sites and migration pathways of Ti, Al and N adatoms on cubic NaCl-structure (B1) AlN surfaces, primary inputs towards a further thin film growth modelling of the TiAlN alloy system. The potential energy landscape is mapped out for both metallic species and nitrogen adatoms for two different AlN surface orientations, (001) and (110), using density functional theory. For all species, the adsorption energies on AlN(011) surface are larger than on AlN(001) surface. Ti and Al adatom adsorption energy landscapes determined at 0 K by ab initio show similar features, with stable binding sites being located in, or near, epitaxial surface positions, with Ti showing a stronger binding compared to Al. In direct contrast, N adatoms (Nad) adsorb preferentially close to N surface atoms (Nsurf), thus forming strong N2-molecule-like bonds on both AlN(001) and (011). Similar to N2 desorption mechanisms reported for other cubic transition metal nitride surfaces, in the present work we investigate Nad/Nsurf desorption on AlN(011) using a drag calculation method. We show that this process leaves a Nsurf vacancy accompanied with a spontaneous surface reconstruction, highlighting faceting formation during growth.

  1. Decoding ALS: From Genes to Mechanism

    PubMed Central

    Taylor, J. Paul; Brown, Robert H.; Cleveland, Don W.

    2017-01-01

    Preface Amyotrophic lateral sclerosis (ALS) is a progressive and uniformly fatal neurodegenerative disease. A plethora of genetic factors underlying ALS have now been identified that drive motor neuron degeneration, increase susceptibility to the disease, or influence the rate of progression. Emerging themes include dysfunction in RNA metabolism and protein homeostasis, with specific defects in nucleocytoplasmic trafficking, induction of endoplasmic reticulum stress, and impaired dynamics of ribonucleoprotein bodies such as RNA granules that assemble through the process of liquid-liquid phase separation. Extraordinary recent progress in understanding the biology of ALS provides new grounds for optimism that meaningful therapies for ALS will be identified. PMID:27830784

  2. Current issues in ALS epidemiology: Variation of ALS occurrence between populations and physical activity as a risk factor.

    PubMed

    Luna, J; Logroscino, G; Couratier, P; Marin, B

    2017-05-01

    Amyotrophic lateral sclerosis (ALS) is a rare neurodegenerative disease with a fatal outcome. This review aims to report key epidemiological features of ALS in relation to the hypothesis of variation between populations, to summarize environmental hypothesis and to highlight current issues that deserve much considerations. Epidemiological ALS studies have shown a variation of incidence, mortality and prevalence between geographical areas and different populations. These data could support the notion that genetic factors, especially populations' ancestries, along with environmental and lifestyle factors, play a significant role in the occurrence of the disease. To date, there is no strong evidence to confirm an association between a particular environmental factor and ALS. Physical activity (PA) has been extensively evaluated. Recent studies support with the best evidence level that PA in general population is not a risk factor for ALS. However, further research is needed to clarify the association of PA in some occupations and some athletic activities. Epidemiological research based on multicenter international collaboration is essential to provide new data on ALS especially in some regions of the world that are to date poorly represented in the ALS literature. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

  3. Combustion synthesis of ceramic-metal composite materials - The TiC-Al2O3-Al system

    NASA Technical Reports Server (NTRS)

    Feng, H. J.; Moore, John J.; Wirth, D. G.

    1992-01-01

    Combustion synthesis was applied for producing ceramic-metal composites with reduced levels of porosity, by allowing an excess amount of liquid metal, generated by the exothermic reaction during synthesis, to infiltrate the pores. It is shown that this method, when applied to TiC-Al2O3 system, led to a decreased level of porosity in the resulting TiC-Al2O3-Al product, as compared with that of TiC-Al2O3 system. This in situ procedure is more efficient than the two-stage conventional processes (i.e., sintering followed by liquid metal infiltration), although there are limitations with respect to total penetration of the liquid metal and maintaining a stable propagation of the combustion reaction.

  4. White matter pathology in ALS and lower motor neuron ALS variants: a diffusion tensor imaging study using tract-based spatial statistics.

    PubMed

    Prudlo, Johannes; Bißbort, Charlotte; Glass, Aenne; Grossmann, Annette; Hauenstein, Karlheinz; Benecke, Reiner; Teipel, Stefan J

    2012-09-01

    The aim of this work was to investigate white-matter microstructural changes within and outside the corticospinal tract in classical amyotrophic lateral sclerosis (ALS) and in lower motor neuron (LMN) ALS variants by means of diffusion tensor imaging (DTI). We investigated 22 ALS patients and 21 age-matched controls utilizing a whole-brain approach with a 1.5-T scanner for DTI. The patient group was comprised of 15 classical ALS- and seven LMN ALS-variant patients (progressive muscular atrophy, flail arm and flail leg syndrome). Disease severity was measured by the revised version of the functional rating scale. White matter fractional anisotropy (FA) was assessed using tract-based spatial statistics (TBSS) and a region of interest (ROI) approach. We found significant FA reductions in motor and extra-motor cerebral fiber tracts in classical ALS and in the LMN ALS-variant patients compared to controls. The voxel-based TBSS results were confirmed by the ROI findings. The white matter damage correlated with the disease severity in the patient group and was found in a similar distribution, but to a lesser extent, among the LMN ALS-variant subgroup. ALS and LMN ALS variants are multisystem degenerations. DTI shows the potential to determine an earlier diagnosis, particularly in LMN ALS variants. The statistically identical findings of white matter lesions in classical ALS and LMN variants as ascertained by DTI further underline that these variants should be regarded as part of the ALS spectrum.

  5. [Lessons from Guam ALS/PDC study].

    PubMed

    Asao, Hirano

    2007-11-01

    An extraordinarily high incidence of amyotrophic lateral sclerosis (ALS) and parkinsonism-dementia complex (PDC) affecting the native population was discovered on the island of Guam a half century ago. Guam ALS is identical to classic ALS clinically and pathologically while PDC is marked by progressive parkinsonism and dementia. The unusual histological finding in these fetal neurodegenerative diseases is the presence of numerous neurofibrillary tangles in a selective topographic distribution unassociated with senile plaques. There have been remarkable advances in field of age-associated neurodegenerative disease after our initial study of Guam cases. Four noteworthy topics are presented in this communication. 1) Clinically, the coexistence of parkinsonism and dementia was frequently recognized in Parkinson disease and Alzheimer disease. Some other new disease entities characterized by coexistence of parkinsonism and dementia have been reported. These include progressive supranuclear palsy, frontotemporal dementia and parkinsonism linked to chromosome 17. 2) Neuropathologically, abundant neurofibrillary tangles unassociated with senile plaques were demonstrated in many diseases such as aftermath of boxing and tangle-only dementia. Furthermore, tau-positive structures were recognized not only in neurons but in glial cells in certain diseases. Tauopathy is one of the current hot research subjects. 3) Familial aggregation of Guam ALS patients provoked investigation of familial ALS elsewhere. Familial motor neuron disease with SOD1 mutation is the target of worldwide intense investigation at the present time. SOD1 gene mutation is, however, not found in Guam ALS. 4) The most striking findings of the Guam study is the gradual decline in the incidence of ALS on Guam during a quarter century and virtual disappearance of new patients. This may be linked to a remarkable change in environment and life style of the Chamorro population. The etiology of ALS is still unknown and

  6. Preparation and characterization of α-Al2O3 film by low temperature thermal oxidation of Al8Cr5 coating

    NASA Astrophysics Data System (ADS)

    Zhang, Min; Xu, Bajin; Ling, Guoping

    2015-03-01

    In this paper, α-Al2O3 film was prepared by low temperature thermal oxidation of Al8Cr5 coating. The Al8Cr5 alloy coating was prepared on SUS430 stainless steel through a two-step approach including electrodepositing Cr/Al composite coating and subsequent heat treatment at 740 °C for 16 h. After mechanical polishing removal of voids on the surface, the Al8Cr5 coating was thermal oxidized at 720 °C in argon for 100 h. The samples were characterized by SEM, EDX, XRD, XPS and TEM. XPS detection on the surface of oxidized Al8Cr5 coating showed that the oxide film mainly consisted of Al2O3. TEM characterization of the oxide film showed that it was α-Al2O3 films ca. 110 nm. The formation of α-Al2O3 films at low temperature can be attributed to the formation of Cr2O3 nuclei at the initial stage of oxidation which lowers the nucleation energy barrier of α-Al2O3.

  7. [A set of quality and safety indicators for hospitals of the "Agencia Valenciana de Salud"].

    PubMed

    Nebot-Marzal, C M; Mira-Solves, J J; Guilabert-Mora, M; Pérez-Jover, V; Pablo-Comeche, D; Quirós-Morató, T; Cuesta Peredo, D

    2014-01-01

    To prepare a set of quality and safety indicators for Hospitals of the «Agencia Valenciana de Salud». The qualitative technique Metaplan® was applied in order to gather proposals on sustainability and nursing. The catalogue of the «Spanish Society of Quality in Healthcare» was adopted as a starting point for clinical indicators. Using the Delphi technique, 207 professionals were invited to participate in the selecting the most reliable and feasible indicators. Lastly, the resulting proposal was validated with the managers of 12 hospitals, taking into account the variability, objectivity, feasibility, reliability and sensitivity, of the indicators. Participation rates varied between 66.67% and 80.71%. Of the 159 initial indicators, 68 were prioritized and selected (21 economic or management indicators, 22 nursing indicators, and 25 clinical or hospital indicators). Three of them were common to all three categories and two did not match the specified criteria during the validation phase, thus obtaining a final catalogue of 63 indicators. A set of quality and safety indicators for Hospitals was prepared. They are currently being monitored using the hospital information systems. Copyright © 2013 SECA. Published by Elsevier Espana. All rights reserved.

  8. Gasto catastrófico en salud en México y sus factores determinantes, 2002-2014.

    PubMed

    Rodríguez-Aguilar, Román; Rivera-Peña, Gustavo

    2017-01-01

    To assess the financial protection of public health insurance by analyzing the percentage of households with catastrophic health expenditure (HCHE) in Mexico and its relationship with poverty status, size of locality, federal entity, insurance status and items of health spending. Mexican National Survey of Income and Expenditures 2002-2014 was used to estimate the percentage of HCHE. Through a probit model, factors associated with the occurrence of catastrophic spending are identified. Analysis was performed using Stata-SE 12. In 2014 there were 2.08% of HCHE (1.82-2.34%; N = 657,474). The estimated probit model correctly classified 98.2% of HCHE (Pr (D) ≥ 0.5). Factors affecting the catastrophic expenditures were affiliation, presence of chronic disease, hospitalization expenditure, rural condition and that the household is below the food poverty line. The percentage of HCHE decreased in recent years, improving financial protection in health. This decline seems to have stalled, keeping inequities in access to health services, especially in rural population without affiliation to any health institution, below the food poverty line and suffering from chronic diseases. Copyright: © 2017 SecretarÍa de Salud

  9. 77 FR 61046 - The Amendment of the Designation of Al-Qa'ida in the Arabian Peninsula, aka Al-Qa'ida of Jihad...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-05

    ... DEPARTMENT OF STATE [Public Notice 8054] The Amendment of the Designation of Al-Qa'ida in the Arabian Peninsula, aka Al-Qa'ida of Jihad Organization in the Arabian Peninsula, aka Tanzim Qa'idat al-Jihad fi Jazirat al-Arab, aka Al- Qa'ida in Yemen, aka Al-Qa'ida in the South Arabian Peninsula, as a...

  10. 77 FR 61046 - The Review and Amendment of the Designation of Al-Qa'ida in the Arabian Peninsula, aka Al-Qa'ida...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-05

    ... DEPARTMENT OF STATE [Public Notice 8055] The Review and Amendment of the Designation of Al-Qa'ida in the Arabian Peninsula, aka Al-Qa'ida of Jihad Organization in the Arabian Peninsula, aka Tanzim Qa'idat al-Jihad fi Jazirat al-Arab, aka Al- Qa'ida in Yemen, aka Al-Qa'ida in the South Arabian Peninsula...

  11. Reply to Gopalswamy et al.

    NASA Technical Reports Server (NTRS)

    Cane, H. V.; Richardson, I. G.

    2003-01-01

    The comment of Gopalswamy et al. (thereafter GMY) relates to a letter discussing coronal mass ejections (CMEs), interplanetary ejecta and geomagnetic storms. GMY contend that Cane et al. incorrectly identified ejecta (interplanetary CMEs) and hypothesize that this is because Cane et al. fail to understand how to separate ejecta from "shock sheaths" when interpreting solar wind and energetic particle data sets. They (GMY) are wrong be cause the relevant section of the paper was concerned with the propagation time to 1 AU of any potentially geoeffective structures caused by CMEs, i.e. upstream compression regions with or without shocks, or ejecta. In other words, the travel times used by Cane et al. were purposefully and deliberately distinct from ejecta travel times (except for those slow ejecta, approx. 30% of their events, which generated no upstream features), and no error in identification was involved. The confusion of GMY stems from the description did not characterize the observations sufficiently clearly.

  12. The ALS patient care database: goals, design, and early results. ALS C.A.R.E. Study Group.

    PubMed

    Miller, R G; Anderson, F A; Bradley, W G; Brooks, B R; Mitsumoto, H; Munsat, T L; Ringel, S P

    2000-01-11

    The ALS Patient Care Database was created to improve the quality of care for patients with ALS by 1) providing neurologists with data to evaluate and improve their practices, 2) publishing data on temporal trends in the care of patients with ALS, and 3) developing hypotheses to be tested during formal clinical trials. Substantial variations exist in managing ALS, but there has been no North American database to measure outcomes in ALS until now. This observational database is open to all neurologists practicing in North America, who are encouraged to enroll both incident and prevalent ALS patients. Longitudinal data are collected at intervals of 3 to 6 months by using standard data collection instruments. Forms are submitted to a central data coordinating center, which mails quarterly reports to participating neurologists. Beginning in September 1996 through November 30, 1998, 1,857 patients were enrolled at 83 clinical sites. On enrollment, patients had a mean age of 58.6 years +/-12.9 (SD) years (range, 20.1 to 95.1 years), 92% were white, and 61% were men. The mean interval between onset of symptoms and diagnosis was 1.2+/-1.6 years (range, 0 to 31.9 years). Riluzole was the most frequently used disease-specific therapy (48%). Physical therapy was the most common nonpharmacologic intervention (45%). The primary caregiver was generally the spouse (77%). Advance directives were in place at the time of death for 70% of 213 enrolled patients who were reported to have died. The ALS Patient Care Database appears to provide valuable data on physician practices and patient-focused outcomes in ALS.

  13. Lattice damage and Al-metal precipitation in 2.5 MeV-electron-irradiated AlH3

    NASA Astrophysics Data System (ADS)

    Zogal, O. J.; Vajda, P.; Beuneu, F.; Pietraszko, A.

    1998-04-01

    AlH3 powder was bombarded with energetic electrons at 20 K and at room temperature and investigated by EPR, NMR, X-ray diffractometry, and microwave dielectric-constant measurements. The EPR spectra of the irradiated powder and of a selected single crystal cuboid of ˜ {10^{ - 1}} mm edge show a complex asymmetric line centered at g = 2.009, with a Curie-like temperature dependence, attributed to radiation-induced color centers and/or their agglomerates. At the same time, the grains, which have become shiny black after irradiation, exhibit an increase of both the real and the imaginary part of ɛ. 27Al-NMR spectra of the irradiated powder present a Knight-shifted line at 1600(50) ppm, close to the position of bulk metallic Al, and corresponding to a concentration of c(Al) ˜ {10^{ - 1}}. In addition, the main hydride line differs from that before irradiation, demonstrating an alteration of environmental symmetry. The irradiation induces also a change in shape and width of the 1H-NMR line, another indication of symmetry change in the lattice. Finally, a refined X-ray single-crystal structure analysis of the irradiated cuboid indicates a change of structure from trigonal R -3 c to R -3, with a loss of mirror symmetry for the two Al sites caused by the introduction of Al-defects in the vicinity of one of them.

  14. Origin of hydrogen-inclusion-induced critical current deviation in Nb/AlOx/Al/Nb Josephson junctions

    NASA Astrophysics Data System (ADS)

    Hinode, Kenji; Satoh, Tetsuro; Nagasawa, Shuichi; Hidaka, Mutsuo

    2010-04-01

    We investigated the mechanisms that change the critical current density (Jc) of Nb/AlOx/Al/Nb Josephson junctions due to the inclusion of hydrogen in the Nb electrodes. Our investigations were performed according to three aspects: the superconductivity change, the change in thickness of the barrier layer, and the change in the barrier height due to the electronic effect. The results are as follows: (a) the hydrogen-inclusion-accompanied changes in the superconductivity parameters, such as the junction gap voltage, were much less than those of the critical current density, (b) the effect of hydrogen inclusion on Jc varied depending on the electrodes, i.e., the upper electrode above the barrier layer was the most affected, (c) the junctions with increased Ics due to hydrogen exclusion showed the identical amount of decrease in the junction resistance measured at room temperature, and (d) the hydrogen exclusion from the junction electrodes had no influence on the Nb/Al/AlOx/Al/Nb junctions, which had an extra Al layer. Based on these results we conclude that the Jc change is mainly caused by the change in junction resistance. A one order of magnitude smaller effect is caused by the superconductivity change. We believe the Jc change is caused by a Nb work function increase due to the hydrogen inclusion, resulting in an increase in barrier height.

  15. Tribological properties of thermally sprayed TiAl-Al2O3 composite coating

    NASA Astrophysics Data System (ADS)

    Salman, A.; Gabbitas, B.; Li, J.; Zhang, D.

    2009-08-01

    The use of thermal spray coatings provides protection to the surfaces operating in severe environments. The main goal of the current work is to investigate the possibility of using a high velocity oxy fuel (HVOF) thermally sprayed wear resistant TiAl/Al2O3 coating on tool steel (H13) which is used for making dies for aluminium high pressure die casting. A feedstock of TiAl/Al2O3 composite powder was produced from a mixture of Al and TiO2 powders by high energy mechanical milling, followed by a thermal reaction process. The feedstock was then thermally sprayed using a high velocity oxy-fuel (HVOF) technique onto H13 steel substrates to produce a composite coating. The present study describes and compares the tribological properties such as friction and sliding wear rate of the coating both at room and high temperature (700°C). The results showed that the composite coating has lower wear rate at high temperature (700°C) than the uncoated H13 sample. At Room temperature without using lubricant there is no much significant difference between the wear rate of the coated and uncoated samples. The experimental results showed that the composite coating has great potential for high temperature application due to its lower wear rate at high temperature in comparison with the uncoated sample at the same temperature. The composite coating was characterized using scanning electron microscopy (SEM), optical microscopy and X-ray diffractometry (XRD). This paper reports the experimental observations and discusses the wear resistance performance of the coatings at room and high temperatures.

  16. Oxidation Kinetics of Cast TiAl3

    NASA Technical Reports Server (NTRS)

    Smialek, J. L.; Humphrey, D. L.

    1992-01-01

    The isothermal oxidation kinetics of the TiAl3 compound over a wide temperature range is documented, and these rates are related to exclusive alpha-Al2O3 scale growth. The specific weight change vs time curves are shown. Two abnormalities are immediately apparent. One is that a rapid initial uptake of oxygen occurs at times less than 5 h, followed by a lower oxidation rate at longer times, for tests at 900 C and below. The other is that the final weight changes for the 700, 800, and 900 C tests are not in the sequence expected with respect to temperature. Isothermal oxidation of drop cast TiAl above 1000 C was found to exhibit parabolic oxidation controlled by protective alpha-Al2O3 scale formation. TiAl is the only phase in the binary Ti-Al system that forms exclusive scales of alpha-Al2O3 in isothermal oxidation. High anomalous rates at short times and at temperatures below 1000 C resulted from the internal oxidation of a second phase of aluminum.

  17. Electrodeposition of Al-Ta alloys in NaCl-KCl-AlCl3 molten salt containing TaCl5

    NASA Astrophysics Data System (ADS)

    Sato, Kazuki; Matsushima, Hisayoshi; Ueda, Mikito

    2016-12-01

    To form Al-Ta alloys for high temperature oxidation resistance components, molten salt electrolysis was carried out in an AlCl3-NaCl-KCl melt containing TaCl5 at 423 K. The voltammogram showed two cathodic waves at 0.45 V and 0.7 V vs. Al/Al(III), which may correspond to reduction from Ta(V) to Ta(III) and from Ta(III) to tantalum metal, respectively. Electrodeposits of Al and Ta were obtained in the range from -0.05 to 0.3 V and the highest concentration of Ta in the electrodeposit was 72 at% at 0.3 V. With increasing Ta content in the alloy, the morphology of the electrodeposits became powdery and the particle size smaller.

  18. Predictions of thermomagnetic properties of Laves phase compounds: TbAl2, GdAl2 and SmAl2 performed with ATOMIC MATTERS MFA computation system

    NASA Astrophysics Data System (ADS)

    Michalski, Rafał; Zygadło, Jakub

    2018-04-01

    Recent calculations of properties of TbAl2 GdAl2 and SmAl2 single crystals, performed with our new computation system called ATOMIC MATTERS MFA are presented. We applied localized electron approach to describe the thermal evolution of Fine Electronic Structure of Tb3+, Gd3+ and Sm3+ ions over a wide temperature range and estimate Magnetocaloric Effect (MCE). Thermomagnetic properties of TbAl2, GdAl2 and SmAl2 were calculated based on the fine electronic structure of the 4f8, 4f7 and 4f5 electronic configuration of the Tb3+ and Gd3+ and Sm3+ ions, respectively. Our calculations yielded: magnetic moment value and direction; single-crystalline magnetization curves in zero field and in external magnetic field applied in various directions m(T,Bext); the 4f-electronic components of specific heat c4f(T,Bext); and temperature dependence of the magnetic entropy and isothermal entropy change with external magnetic field - ΔS(T,Bext). The cubic universal CEF parameters values used for all CEF calculations was taken from literature and recalculated for universal cubic parameters set for the RAl2 series: A4 = +7.164 Ka04 and A6 = -1.038 Ka06. Magnetic properties were found to be anisotropic due to cubic Laves phase C15 crystal structure symmetry. These studies reveal the importance of multipolar charge interactions when describing thermomagnetic properties of real 4f electronic systems and the effectiveness of an applied self-consistent molecular field in calculations for magnetic phase transition simulation.

  19. Control Al/Mg intermetallic compound formation during ultrasonic-assisted soldering Mg to Al.

    PubMed

    Xu, Zhiwu; Li, Zhengwei; Li, Jiaqi; Ma, Zhipeng; Yan, Jiuchun

    2018-09-01

    To prevent the formation of Al/Mg intermetallic compounds (IMCs) of Al 3 Mg 2 and Al 12 Mg 17 , dissimilar Al/Mg were ultrasonic-assisted soldered using Sn-based filler metals. A new IMC of Mg 2 Sn formed in the soldered joints during this process and it was prone to crack at large thickness. The thickness of Mg 2 Sn was reduced to 22 μm at 285 °C when using Sn-3Cu as the filler metal. Cracks were still observed inside the blocky Mg 2 Sn. The thickness of Mg 2 Sn was significantly reduced when using Sn-9Zn as the filler metal. A 17 μm Mg 2 Sn layer without crack was obtained at a temperature of 200 °C, ultrasonic power of Mode I, and ultrasonic time of 2 s. The shear strengths of the joints using Sn-9Zn was much higher than those using Sn-3Cu because of the thinner Mg 2 Sn layer in the former joints. Sn whiskers were prevented by using Sn-9Zn. A cavitation model during ultrasonic assisted soldering was proposed. Copyright © 2018 Elsevier B.V. All rights reserved.

  20. Structure and magnetic properties of FeSiAl-based soft magnetic composite with AlN and Al2O3 insulating layer prepared by selective nitridation and oxidation

    NASA Astrophysics Data System (ADS)

    Zhong, Xiaoxi; Liu, Ying; Li, Jun; Wang, Yiwei

    2012-08-01

    FeSiAl is widely used in switching power supply, filter inductors and pulse transformers. But when used under higher frequencies in some particular condition, it is required to reduce its high-frequency loss. Preparing a homogeneous insulating coating with good heat resistance and high resistivity, such as AlN and Al2O3, is supposed to be an effective way to reduce eddy current loss, which is less focused on. In this project, mixed AlN and Al2O3 insulating layers were prepared on the surface of FeSiAl powders after 30 min exposure at 1100 °C in high purity nitrogen atmosphere, by means of surface nitridation and oxidation. The results revealed that the insulating layers increase the electrical resistivity, and hence decrease the loss factor, improve the frequency stability and increase the quality factor, especially in the high-frequency range. The morphologies, microstructure and compositions of the oxidized and nitrided products on the surface were characterized by Scanning Electron Microscopy/Energy Disperse Spectroscopy, X-Ray Diffraction, Transmission Electron Microscopy, Selected Area Electron Diffraction and X-ray Photoelectron Spectroscopy.

  1. Efficiency of "Prescribe Vida Saludable", a health promotion innovation. Pilot phase.

    PubMed

    Sanz-Guinea, Aitor; Espinosa, Maite; Grandes, Gonzalo; Sáncheza, Álvaro; Martínez, Catalina; Pombo, Haizea; Bully, Paola; Cortada, Josep

    "Prescribe Vida Saludable" (PVS) is an organisational innovation designed to optimise the promotion of multiple healthy habits in primary healthcare. It aims to estimate the cost effectiveness and cost-utility of prescribing physical activity in the pilot phase of the PVS programme, compared to the routine clinical practice of promoting physical activity in primary healthcare. An economic evaluation of the quasi-experimental pilot phase of PVS was carried out. In the four control centres, a systematic sample was selected of 194 patients who visited the centre in a single year and who did not comply with physical activity recommendations. In the four intervention centres, 122 patients who received their first physical activity prescription were consecutively enrolled. The costs were evaluated from the perspective of the PVS programme using bottom-up methodology. The effectiveness (proportion of patients who changed their physical activity) as well as the utility were evaluated at baseline and after 3 months. The incremental cost-utility ratio (ICUR) and the incremental cost-effectiveness ratio (ICER) were calculated and a sensitivity analysis was performed with bootstrapping and 1,000 replications. Information was obtained from 35% of control cases and 62% of intervention cases. The ICUR was €1,234.66/Quality Adjusted Life Years (QALY) and the ICER was €4.12. In 98.3% of the simulations, the ICUR was below the €30,000/QALY threshold. The prescription of physical activity was demonstrably within acceptable cost-utility limits in the pilot PVS phase, even from a conservative perspective. Copyright © 2017 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

  2. The in vitro biocompatibility and macrophage phagocytosis of Mg17Al12 phase in Mg-Al-Zn alloys.

    PubMed

    Liu, Chen; He, Peng; Wan, Peng; Li, Mei; Wang, Kehong; Tan, Lili; Zhang, Yu; Yang, Ke

    2015-07-01

    Mg alloys are gaining interest for applications as biodegradable medical implant, including Mg-Al-Zn series alloys with good combination of mechanical properties and reasonable corrosion resistance. However, whether the existence of second phase particles in the alloys exerts influence on the biocompatibility is still not clear. A deeper understanding of how the particles regulate specific biological responses is becoming a crucial requirement for their subsequent biomedical application. In this work, the in vitro biocompatibility of Mg17Al12 as a common second phase in biodegradable Mg-Al-Zn alloys was investigated via hemolysis, cytotoxicity, cell proliferation, and cell adhesion tests. Moreover, osteogenic differentiation was evaluated by the extracellular matrix mineralization assay. The Mg17Al12 particles were also prepared to simulate the real situation of second phase in the in vivo environment in order to estimate the cellular response in macrophages to the Mg17Al12 particles. The experimental results indicated that no hemolysis was found and an excellent cytocompatibility was also proved for the Mg17Al12 second phase when co-cultured with L929 cells, MC3T3-E1 cells and BMSCs. Macrophage phagocytosis co-culture test revealed that Mg17Al12 particles exerted no harmful effect on RAW264.7 macrophages and could be phagocytized by the RAW264.7 cells. Furthermore, the possible inflammatory reaction and metabolic way for Mg17Al12 phase were also discussed in detail. © 2014 Wiley Periodicals, Inc.

  3. Free-energy based pair-additive potentials for bulk Ni-Al systems: Application to study Ni-Al reactive alloying

    NASA Astrophysics Data System (ADS)

    Izvekov, Sergei; Rice, Betsy M.

    2012-09-01

    We present new numerical pair-additive Al, Ni, and Al-Ni potentials by force-matching (FM) ionic force and virial data from single (bulk liquid) phase ab initio molecular dynamics (MD) simulations using the Born-Oppenheimer method. The potentials are represented by piece-wise functions (splines) and, therefore, are not constrained to a particular choice of analytical functional form. The FM method with virial constraint naturally yields a potential which maps out the ionic free-energy surface of the reference ensemble. To further improve the free energetics of the FM ensemble, the FM procedure is modified to bias the potentials to reproduce the experimental melting temperatures of the reference (FCC-Al, FCC-Ni, B2-NiAl) phases, the only macroscopic data included in the fitting set. The performance of the resultant potentials in simulating bulk metallic phases is then evaluated. The new model is applied to perform MD simulations of self-propagating exothermic reaction in Ni-Al bilayers at P = 0-5 GPa initiated at T = 1300 K. Consistent with experimental observations, the new model describes realistically a sequence of peritectic phase transformations throughout the reaction and at a realistic rate. The reaction proceeds through interlayer diffusion of Al and Ni atoms at the interface with formation of B2-NiAl in the Al melt. Such material responses have, in the past, been proven to be difficult to observe with then-existing potentials.

  4. MCrAlY bond coat with enhanced Yttrium layer

    DOEpatents

    Jablonski, Paul D; Hawk, Jeffrey A

    2015-04-21

    One or more embodiments relates to an MCrAlY bond coat comprising an MCrAlY layer in contact with a Y--Al.sub.2O.sub.3 layer. The MCrAlY layer is comprised of a .gamma.-M solid solution, a .beta.-MAl intermetallic phase, and Y-type intermetallics. The Y--Al.sub.2O.sub.3 layer is comprised of Yttrium atoms coordinated with oxygen atoms comprising the Al.sub.2O.sub.3 lattice. Both the MCrAlY layer and the Y--Al.sub.2O.sub.3 layer have a substantial absence of Y--Al oxides, providing advantage in the maintainability of the Yttrium reservoir within the MCrAlY bulk. The MCrAlY bond coat may be fabricated through application of a Y.sub.2O.sub.3 paste to an MCrAlY material, followed by heating in a non-oxidizing environment.

  5. Alleviation of Al Toxicity by Si Is Associated with the Formation of Al-Si Complexes in Root Tissues of Sorghum.

    PubMed

    Kopittke, Peter M; Gianoncelli, Alessandra; Kourousias, George; Green, Kathryn; McKenna, Brigid A

    2017-01-01

    Silicon is reported to reduce the toxic effects of Al on root elongation but the in planta mechanism by which this occurs remains unclear. Using seedlings of soybean ( Glycine max ) and sorghum ( Sorghum bicolor ), we examined the effect of up to 2 mM Si on root elongation rate (RER) in Al-toxic nutrient solutions. Synchrotron-based low energy X-ray fluorescence (LEXRF) was then used for the in situ examination of the distribution of Al and Si within cross-sections cut from the apical tissues of sorghum roots. The addition of Si potentially increased RER in Al-toxic solutions, with RER being up to ca. 0.3 mm h -1 (14%) higher for soybean and ca. 0.2 mm h -1 (17%) higher for sorghum relative to solutions without added Si. This improvement in RER could not be attributed to a change in Al-chemistry of the bulk nutrient solution, nor was it due to a change in the concentration of Al within the apical (0-10 mm) root tissues. Using LEXRF to examine sorghum, it was demonstrated that in roots exposed to both Al and Si, much of the Al was co-located with Si in the mucigel and outer apoplast. These observations suggest that Si reduces the toxicity of Al in planta through formation of Al-Si complexes in mucigel and outer cellular tissues, thereby decreasing the binding of Al to the cell wall where it is known to inhibit wall loosening as required for cell elongation.

  6. Effect of Al2O3sf addition on the friction and wear properties of (SiCp+Al2O3sf)/Al2024 composites fabricated by pressure infiltration

    NASA Astrophysics Data System (ADS)

    Xu, Hui; Zhang, Gong-zhen; Cui, Wei; Ren, Shu-bin; Wang, Qian-jin; Qu, Xuan-hui

    2018-03-01

    Aluminum (Al) 2024 matrix composites reinforced with alumina short fibers (Al2O3sf) and silicon carbide particles (SiCp) as wear-resistant materials were prepared by pressure infiltration in this study. Further, the effect of Al2O3sf on the friction and wear properties of the as-synthesized composites was systematically investigated, and the relationship between volume fraction and wear mechanism was discussed. The results showed that the addition of Al2O3sf, characterized by the ratio of Al2O3sf to SiCp, significantly affected the properties of the composites and resulted in changes in wear mechanisms. When the volume ratio of Al2O3sf to SiCp was increased from 0 to 1, the rate of wear mass loss ( K m) and coefficients of friction (COFs) of the composites decreased, and the wear mechanisms were abrasive wear and furrow wear. When the volume ratio was increased from 1 to 3, the COF decreased continuously; however, the K m increased rapidly and the wear mechanism became adhesive wear.

  7. Evidence for Al/Si tetrahedral network in aluminosilicate glasses from Al K-edge x-ray-absorption spectroscopy

    NASA Astrophysics Data System (ADS)

    Wu, Ziyu; Romano, C.; Marcelli, A.; Mottana, A.; Cibin, G.; della Ventura, G.; Giuli, G.; Courtial, P.; Dingwell, D. B.

    1999-10-01

    The structure of aluminosilicate melts and/or glasses plays a key role in the earth sciences for the understanding of rock-forming igneous processes, as well as in the materials sciences for their technical applications. In particular, the alkaline-earth aluminosilicate glasses are an extremely important group of materials, with a wide range of commercial application, as well as serving as an analog for natural basaltic melts. However, definition of their structure and properties is still controversial, and in particular the role and effect of Al has long been a subject of debate. Here we report a series of experimental x-ray absorption near-edge structure spectra at the Al K edge on a series of synthetic glasses of peralkaline composition in the CaO-Al2O3-SiO2 system, together with a general theoretical framework for data analysis based on an ab initio full multiple-scattering theory. We propose an Al/Si tetrahedral network model for aluminosilicate glasses based on distorted polyhedra, with varying both the T-O (T=Al or Si) bond lengths and the T-O-T angles, and with different Al/Si composition. This model achieves a significant agreement between experiments and simulations. In these glasses, experimental data and theoretical results concur to support a model in which Al is network former with a comparatively well ordered local medium-range order (up to 5 Å).

  8. Clinical trials for neuroprotection in ALS.

    PubMed

    Siciliano, G; Carlesi, C; Pasquali, L; Piazza, S; Pietracupa, S; Fornai, F; Ruggieri, S; Murri, L

    2010-07-01

    Owing to uncertainty on the pathogenic mechanisms underlying motor neuron degeneration in amyotrophic lateral sclerosis (ALS) riluzole remains the only available therapy, with only marginal effects on disease survival. Here we review some of the recent advances in the search for disease-modifying drugs for ALS based on their putative neuroprotective effetcs. A number of more or less established agents have recently been investigated also in ALS for their potential role in neuroprotection and relying on antiglutamatergic, antioxidant or antiapoptotic strategies. Among them Talampanel, beta-lactam antibiotics, Coenzyme Q10, and minocycline have been investigated. Progress has also been made in exploiting growth factors for the treatment of ALS, partly due to advances in developing effective delivery systems to the central nervous system. A number of new therapies have also been identified, including a novel class of compounds, such as heat-shock protein co-inducers, which upregulate cell stress responses, and agents promoting autophagy and mitochondriogenesis, such as lithium and rapamycin. More recently, alterations of mRNA processing were described as a pathogenic mechanism in genetically defined forms of ALS, as those related to TDP-43 and FUS-TLS gene mutations. This knowledge is expected to improve our understanding of the pathogenetic mechanism in ALS and developing more effective therapies.

  9. The fecal microbiome of ALS patients.

    PubMed

    Brenner, David; Hiergeist, Andreas; Adis, Carolin; Mayer, Benjamin; Gessner, André; Ludolph, Albert C; Weishaupt, Jochen H

    2018-01-01

    Amyotrophic lateral sclerosis (ALS) is a fatal neurodegenerative motor neuron disease accompanied by both systemic and central nervous system-specific inflammation as well as deregulated energy metabolism. These potential pathogenetic factors have recently been found to mutually interact with the gut microbiota, raising the hypothesis of a link between microbiome alterations and ALS pathogenesis. The aim of our study was to assess whether ALS is associated with an altered composition of the fecal microbiota. We compared the fecal microbiota of 25 ALS patients with 32 age- and gender-matched healthy persons using 16S rRNA gene sequencing analysis. Confounding factors and secondary disease effects on the microbiome were minimized by selection of patients without dysphagia, gastrostomy, noninvasive ventilation, or reduced body mass index. Comparing the 2 carefully matched groups, the diversity and the abundance of the bacterial taxa on the different taxonomic levels as well as PICRUSt-predicted metagenomes were almost indistinguishable. Significant differences between ALS patients and healthy controls were only observed with regard to the overall number of microbial species (operational taxonomic units) and in the abundance of uncultured Ruminococcaceae. Conclusively, ALS patients do not exhibit a substantial alteration of the gut microbiota composition. Copyright © 2017 Elsevier Inc. All rights reserved.

  10. Microstructure and properties of Ti-Al intermetallic/Al2O3 layers produced on Ti6Al2Mo2Cr titanium alloy by PACVD method

    NASA Astrophysics Data System (ADS)

    Sitek, R.; Bolek, T.; Mizera, J.

    2018-04-01

    The paper presents investigation of microstructure and corrosion resistance of the multi-component surface layers built of intermetallic phases of the Ti-Al system and an outer Al2O3 ceramic sub-layer. The layers were produced on a two phase (α + β) Ti6Al2Mo2Cr titanium alloy using the PACVD method with the participation of trimethylaluminum vapors. The layers are characterized by a high surface hardness and good corrosion, better than that of these materials in the starting state. In order to find the correlation between their structure and properties, the layers were subjected to examinations using optical microscopy, X-ray diffraction analysis (XRD), surface analysis by XPS, scanning electron microscopy (SEM), and analyses of the chemical composition (EDS). The properties examined included: the corrosion resistance and the hydrogen absorptiveness. Moreover growth of the Al2O3 ceramic layer and its influence on the residual stress distribution was simulated using finite element method [FEM]. The results showed that the produced layer has amorphous-nano-crystalline structure, improved corrosion resistance and reduces the permeability of hydrogen as compared with the base material of Ti6Al2Mo2Cr -titanium alloy.

  11. Physical and electrical characterizations of AlGaN/GaN MOS gate stacks with AlGaN surface oxidation treatment

    NASA Astrophysics Data System (ADS)

    Yamada, Takahiro; Watanabe, Kenta; Nozaki, Mikito; Shih, Hong-An; Nakazawa, Satoshi; Anda, Yoshiharu; Ueda, Tetsuzo; Yoshigoe, Akitaka; Hosoi, Takuji; Shimura, Takayoshi; Watanabe, Heiji

    2018-06-01

    The impacts of inserting ultrathin oxides into insulator/AlGaN interfaces on their electrical properties were investigated to develop advanced AlGaN/GaN metal–oxide–semiconductor (MOS) gate stacks. For this purpose, the initial thermal oxidation of AlGaN surfaces in oxygen ambient was systematically studied by synchrotron radiation X-ray photoelectron spectroscopy (SR-XPS) and atomic force microscopy (AFM). Our physical characterizations revealed that, when compared with GaN surfaces, aluminum addition promotes the initial oxidation of AlGaN surfaces at temperatures of around 400 °C, followed by smaller grain growth above 850 °C. Electrical measurements of AlGaN/GaN MOS capacitors also showed that, although excessive oxidation treatment of AlGaN surfaces over around 700 °C has an adverse effect, interface passivation with the initial oxidation of the AlGaN surfaces at temperatures ranging from 400 to 500 °C was proven to be beneficial for fabricating high-quality AlGaN/GaN MOS gate stacks.

  12. Atomistic simulation study of influence of Al2O3-Al interface on dislocation interaction and prismatic loop formation during nano-indentation on Al2O3-coated aluminum.

    PubMed

    Mishra, Srishti; Meraj, Md; Pal, Snehanshu

    2018-06-19

    A large-scale molecular dynamics (MD) simulation of nano-indentation was carried out to provide insight into the influence of the Al-Al 2 O 3 interface on dislocation evolution and deformation behavior of Al substrate coated with Al 2 O 3 thin film. Adaptive common neighbor analysis (a-CNA), centro-symmetry parameter (CSP) estimation, and dislocation extraction algorithm (DXA) were implemented to represent structural evolution during nano-indentation deformation. The absence of elastic regime was observed in the P-h curve for this simulated nano-indentation test of Al 2 O 3 thin film coated Al specimen. The displacement of oxygen atoms from Al 2 O 3 to Al partly through the interface greatly influences the plastic deformation behavior of the specimen during nano-indentation. Prismatic dislocation loops, which are formed due to pinning of Shockley partials (1/6 < 112>) by Stair-rod (1/6 < 110>) and Hirth dislocation (1/3 < 001>), were observed in all cases studied in this work. Pile-up of atoms was also observed and the extent of the pile-up was found to vary with the test temperature. A distorted stacking fault tetrahedron (SFT) is formed when a nano-indentation test is carried out at 100 K. The presence of a prismatic dislocation loop, SFT and dislocation forest caused strain hardening and, consequently, there is an increase in hardness as indentation depth increases. Graphical abstract Figure illustrates nano-indentation model set up along with load vs. depth curve and distorted stacking fault tetrahedron.

  13. AL(0) in municipal waste incinerator ash

    NASA Astrophysics Data System (ADS)

    Stipp, S. L.; Ronsbo, J. G.; Zunic, T. B.; Christensen, T. H.

    2003-04-01

    Disposal of municipal waste is a challenge to society. Waste volume is substantially decreased by incineration but residual ash usually contains a number of toxic components which must be immobilised to insure environmental protection. One element, chromium, is mobile and toxic in its oxidised state as Cr(VI) but it can be reduced to Cr(III) and immobilised. Reduction can be promoted by ash treatment with Fe(0) or Fe(II), but recent evidence shows that at least some Cr(VI) is reduced spontaneously in the ash. Aspects of ash behaviour suggest metallic aluminium as the reducing agent, but no direct evidence of Al(0) has been found until now. We examined filter ash from an energy-producing, municipal-waste incinerator (Vest-forbrænding) near Copenhagen. X-ray diffraction (XRD) identified expected salts of Na, K and Ca such as halite, sylvite, calcite, anhydrite and gypsum as well as quartz, feldspar and some hematite. Wave-dispersive electron microprobe produced elemen-tal maps of the ash; Al-rich areas were analysed quantitatively by comparison with standards. We identified metallic Al particles, averaging 50 to 100 micrometers in di-ameter, often with a fractured, glassy border of aluminum oxide. The particles were porous, explaining fast Cr(VI) reduction and they contained thin exsolution lamellae of Al-alloys of Pb and Cu or Mn, Fe and Ag, which provide clues of the Al(0) origin in the waste. Sometimes Al(0) occurred inside glassy globes of Al2O3. Time-of-flight secondary ion mass spectroscopy (TOF-SIMS) and X-ray photoelectron spectroscopy (XPS) proved that surface Al concentrations on ash particles were below detection, confirming reactivity of the Al(0) bulk. The persistence of reduced Al through the highly oxidising combustion procedure comes as a surprise and is a benefit in the immobilisation of Cr(VI) from municipal-waste incineration residues.

  14. Al-to-oxide and Ti-to-organic linkages in biogenic sediment: relationships to paleo-export production and bulk Al/Ti

    NASA Astrophysics Data System (ADS)

    Kryc, K. A.; Murray, R. W.; Murray, D. W.

    2003-06-01

    To increase our understanding of the mechanisms that control the distribution of Al and Ti within marine sediment, we performed sequential extractions targeting the chemical signatures of the loosely bound, exchangeable, carbonate, oxide, organic, opal, and residual fraction of sediment from a carbonate-dominated regime (equatorial Pacific) and from a mixed opal-terrigenous regime (West Antarctic Peninsula). We observe a systematic partitioning of Al and Ti between sediment phases that is related to bulk Al/Ti. We show that, where we can quantify an Alexcess component, the dissolved Al is preferentially affiliated with the oxide fraction, resulting in Al/Ti molar ratios of 500-3000. This is interpreted as the result of surface complexation in the water column of dissolved Al onto oxyhydroxides. We also observe a previously undetected Tiexcess with as much as 80% of the total Ti in the organic fraction, which is most likely a function of metal-organic colloidal removal from the water column. In samples where the excess metals are obscured by the detrital load, the Al and Ti are almost exclusively found in the residual phase. This argues for the paired removal of Al (preferentially by the oxide component) and Ti (preferentially by the organic component) from the water column by settling particulate matter. This research builds upon earlier work that shows changes in the bulk ratio of Al to Ti in carbonate sediment from the central-equatorial Pacific that coincide with changes in the sedimentary bulk accumulation rate (BAR). The ratios that are observed are as much as three times higher than typical shale values, and were interpreted as the result of scavenging of dissolved Al onto particles settling in the water column. Because this non-terrigenous Alexcess accounts for up to 50% of the total sedimentary Al inventory and correlates best with BAR, the bulk Al/Ti may be a sensitive tracer of particle flux and, therefore, export production. Because we show that the

  15. Capacitance-voltage characterization of Al/Al2O3/PVA-PbSe MIS diode

    NASA Astrophysics Data System (ADS)

    Gawri, Isha; Sharma, Mamta; Jindal, Silky; Singh, Harpreet; Tripathi, S. K.

    2018-05-01

    The present paper reports the capacitance-voltage characterization of Al/Al2O3/PVA-PbSe MIS diode using chemical bath deposition method. Here anodic alumina layer prepared using electrolytic deposition method on Al substrate is used as insulating material. Using the capacitance-voltage variation at a fixed frequency, the different parameters such as Depletion layer width, Barrier height, Built-in voltage and Carrier concentration has been calculated at room temperature as well as at temperature range from 123 K to 323 K. With the increase in temperature the barrier height and depletion layer width follow a decreasing trend. Therefore, the capacitance-voltage characterization at different temperatures characterization provides strong evidence that the properties of MIS diode are primarily affected by diode parameters.

  16. Al-Qaeda Core: A Case Study

    DTIC Science & Technology

    2017-10-01

    near-simultaneous bombings of the U.S. embassies in Kenya and Tanzania in August 1998 that killed 224 people and wounded more than 5,000; the October...Yemeni Al-Qaeda members attempted unsuccessfully to bomb the USS The Sullivans, anchored in Yemen’s port of Aden. But ten months later, Al-Qaeda... bombing of a synagogue in Tunisia, Al-Qaeda operatives carried out major attacks in Casablanca (May 16, 2003), Istanbul (December 20, 2003), Madrid

  17. Structural and mechanical characterization of Al/Al2O3 nanotube thin film on TiV alloy

    NASA Astrophysics Data System (ADS)

    Sarraf, M.; Zalnezhad, E.; Bushroa, A. R.; Hamouda, A. M. S.; Baradaran, S.; Nasiri-Tabrizi, B.; Rafieerad, A. R.

    2014-12-01

    In this study, the fabrication and characterization of Al/Al2O3 nanotubular arrays on Ti-6Al-4V substrate were carried out. To this end, aluminum thin films were deposited as a first coating layer by direct current (DC) magnetron sputtering with the coating conditions of 300 W, 150 °C and 75 V substrate bias voltage. Al2O3 nanotube array as a second layer was grown on the Al layer by electrochemical anodisation at the constant potential of 20 V within different time periods in an electrolyte solution. For annealing the coated substrates, plasma treatment (PT) technique was utilized under various conditions to get the best adhesion strength of coating to the substrate. To characterize the coating layers, micro scratch test, Vickers hardness and field emission of scanning electron microscopy (FESEM) were used. Results show that after the deposition of pure aluminum on the substrate the scratch length, load and failure point were 794.37 μm, 1100 mN and 411.43 μm, respectively. After PT, the best adhesion strength (2038 mN) was obtained at RF power of 60 W. With the increase of the RF power up to 80 W, a reduction in adhesion strength was observed (1525.22 mN). From the microstructural point of view, a homogenous porous structure with an average pore size of 40-60 nm was formed after the anodisation for 10-45 min. During PT, the porous structure was converted to dense alumina layer when the RF power rose from 40 to 80 W. This led to an increase in hardness value from 2.7 to 3.4 GPa. Based on the obtained data, the RF power of 60 W was the optimum condition for plasma treatment of Al/Al2O3 nanotubular arrays on Ti-6Al-4V substrate.

  18. A first-principles study of the structural, mechanical and electronic properties of precipitates of Al2Cu in Al-Cu alloys.

    PubMed

    Ouyang, Y F; Chen, H M; Tao, X M; Gao, F; Peng, Q; Du, Y

    2018-01-03

    The properties of precipitates are important in understanding the strengthening mechanism via precipitation during heat treatment and the aging process in Al-Cu based alloys, where the formation of precipitates is sensitive to temperature and pressure. Here we report a first-principles investigation of the effect of temperature and pressure on the structural stability, elastic constants and formation free energy for precipitates of Al 2 Cu, as well as their mechanical properties. Based on the formation enthalpy of Guinier-Preston (GP(I)) zones, the size of the GP(I) zone is predicted to be about 1.4 nm in diameter, which is in good agreement with experimental observations. The formation enthalpies of the precipitates are all negative, suggesting that they are all thermodynamically stable. The present calculations reveal that entropy plays an important role in stabilizing θ-Al 2 Cu compared with θ C '-Al 2 Cu. The formation free energies of θ''-Al 3 Cu, θ C '-Al 2 Cu, θ D '-Al 5 Cu 3 and θ t '-Al 11 Cu 7 increase with temperature, while those of θ'-Al 2 Cu, θ O '-Al 2 Cu and θ-Al 2 Cu decrease. The same trend is observed with the effect of pressure. The calculated elastic constants for the considered precipitation phases indicate that they are all mechanically stable and anisotropic, except θ C '-Al 2 Cu. θ D '-Al 5 Cu 3 has the highest Vicker's hardness. The electronic structures are also calculated to gain insight into the bonding characteristics. The present results can help in understanding the formation of precipitates by different treatment processes.

  19. The Transcription Factor AlsR Binds and Regulates the Promoter of the alsSD Operon Responsible for Acetoin Formation in Bacillus subtilis

    PubMed Central

    Frädrich, Claudia; March, Anika; Fiege, Kerstin; Hartmann, Anja; Jahn, Dieter

    2012-01-01

    Bacillus subtilis forms acetoin under anaerobic fermentative growth conditions and as a product of the aerobic carbon overflow metabolism. Acetoin formation from pyruvate requires α-acetolactate synthase and acetolactate decarboxylase, both encoded by the alsSD operon. The alsR gene, encoding the LysR-type transcriptional regulator AlsR, was found to be essential for the in vivo expression of alsSD in response to anaerobic acetate accumulation, the addition of acetate, low pH, and the aerobic stationary phase. The expressions of the alsSD operon and the alsR regulatory gene were independent of other regulators of the anaerobic regulatory network, including ResDE, Fnr, and ArfM. A negative autoregulation of alsR was observed. In vitro transcription from the alsSD promoter using purified B. subtilis RNA polymerase required AlsR. DNA binding studies with purified recombinant AlsR in combination with promoter mutagenesis experiments identified a 19-bp high-affinity palindromic binding site (TAAT-N11-ATTA) at positions −76 to −58 (regulatory binding site [RBS]) and a low-affinity site (AT-N11-AT) at positions −41 to −27 (activator binding site [ABS]) upstream of the transcriptional start site of alsSD. The RBS and ABS were found to be essential for in vivo alsSD transcription. AlsR binding to both sites induced the formation of higher-order, transcription-competent complexes. The AlsR protein carrying the S100A substitution at the potential coinducer binding site still bound to the RBS and ABS. However, AlsR(S100A) failed to form the higher-order complex and to initiate in vivo and in vitro transcription. A model for AlsR promoter binding and transcriptional activation was deduced. PMID:22178965

  20. Modulus, strength and thermal exposure studies of FP-Al2O3/aluminum and FP-Al2O3/magnesium composites

    NASA Technical Reports Server (NTRS)

    Bhatt, R. T.

    1981-01-01

    The mechanical properties of FP-Al2O3 fiber reinforced composites prepared by liquid infiltration techniques are improved. A strengthening addition, magnesium, was incorporated with the aluminum-lithium matrix alloy usually selected for these composites because of its good wetting characteristics. This ternary composite, FP-Al2O3/Al-(2-3)Li-(3-5)Mg, showed improved transverse strength compared with FP-Al2O3/Al-(2-3)Li composites. The lower axial strengths found for the FP-Al2O3/Al-(2-3)Li-(3-5)Mg composites were attributed to fabrication related defects. Another technique was the use of Ti/B coated FP-Al2O3 fibers in the composites. This coating is readily wet by molten aluminum and permitted the use of more conventional aluminum alloys in the composites. However, the anticipated improvements in the axial and transverse strengths were not obtained due to poor bonding between the fiber coating and the matrix. A third approach studied to improve the strengths of FP-Al2O3 reinforced composites was the use of magnesium alloys as matrix materials. While these alloys wet fibers satisfactorily, the result indicated that the magnesium alloy composites used offered no axial strength or modulus advantage over FP-Al2O3/Al-(2-3)Li composites.

  1. Partial oxidation of dimethyl ether using the structured catalyst Rh/Al2O3/Al prepared through the anodic oxidation of aluminum.

    PubMed

    Yu, B Y; Lee, K H; Kim, K; Byun, D J; Ha, H P; Byun, J Y

    2011-07-01

    The partial oxidation of dimethyl ether (DME) was investigated using the structured catalyst Rh/Al2O3/Al. The porous Al2O3 layer was synthesized on the aluminum plate through anodic oxidation in an oxalic-acid solution. It was observed that about 20 nm nanopores were well developed in the Al2O3 layer. The thickness of Al2O3 layer can be adjusted by controlling the anodizing time and current density. After pore-widening and hot-water treatment, the Al2O3/Al plate was calcined at 500 degrees C for 3 h. The obtained delta-Al2O3 had a specific surface area of 160 m2/g, making it fit to be used as a catalyst support. A microchannel reactor was designed and fabricated to evaluate the catalytic activity of Rh/Al2O3/Al in the partial oxidation of DME. The structured catalyst showed an 86% maximum hydrogen yield at 450 degrees C. On the other hand, the maximum syngas yield by a pack-bed-type catalyst could be attained by using a more than fivefold Rh amount compared to that used in the structured Rh/Al2O3/Al catalyst.

  2. Creep and Toughness of Cryomilled NiAl Containing Cr

    NASA Technical Reports Server (NTRS)

    Whittenberger, J. Daniel; Aikin, Beverly; Salem, Jon

    2000-01-01

    NiAl-AlN + Cr composites were produced by blending cryomilled NiAl powder with approx. 10 vol % Cr flakes. In comparison to the as-consolidated matrices, hot isostatically pressed Cr-modified materials did not demonstrate any significant improvement in toughness. Hot extruded NiAl-AlN+10.5Cr, however, possessed a toughness twice that determine for the base NiAl-AlN alloy. Measurement of the 1200 to 1400 K plastic flow properties revealed that the strength of the composites was completely controlled by the properties of the NiAl-AlN matrices. This behavior could be successfully modeled by the Rule-of-Mixtures, where load is shed from the weak Cr to the strong matrix.

  3. Al cation induces aggregation of serum proteins.

    PubMed

    Chanphai, P; Kreplak, L; Tajmir-Riahi, H A

    2017-07-15

    Al cation is known to induce protein fibrillation and causes several neurodegenerative disorders. We report the spectroscopic, thermodynamic analysis and AFM imaging for the Al cation binding process with human serum albumin (HSA), bovine serum albumin (BSA) and milk beta-lactoglobulin (b-LG) in aqueous solution at physiological pH. Hydrophobicity played a major role in Al-protein interactions with more hydrophobic b-LG forming stronger Al-protein complexes. Thermodynamic parameters ΔS, ΔH and ΔG showed Al-protein bindings occur via hydrophobic and H-bonding contacts for b-LG, while van der Waals and H-bonding interactions prevail in HSA and BSA adducts. AFM clearly indicated that aluminum cations are able to force BSA and b-LG into larger or more robust aggregates than HSA, with HSA 4±0.2 (SE, n=801) proteins per aggregate, for BSA 17±2 (SE, n=148), and for b-LG 12±3 (SE, n=151). Thioflavin T test showed no major protein fibrillation in the presence of Al cation. Al complexation induced major alterations of protein conformations with the order of perturbations b-LG>BSA>HSA. Copyright © 2017 Elsevier B.V. All rights reserved.

  4. Short-wavelength InAlGaAs/AlGaAs quantum dot superluminescent diodes

    NASA Astrophysics Data System (ADS)

    Liang, De-Chun; An, Qi; Jin, Peng; Li, Xin-Kun; Wei, Heng; Wu, Ju; Wang, Zhan-Guo

    2011-10-01

    This paper reports the fabrication of J-shaped bent-waveguide superluminescent diodes utilizing an InAlGaAs/AlGaAs quantum dot active region. The emission spectrum of the device is centred at 884 nm with a full width at half maximum of 37 nm and an output power of 18 mW. By incorporating an Al composition into the quantum dot active region, short-wavelength superluminescent diode devices can be obtained. An intersection was found for the light power-injection current curves measured from the straight-waveguide facet and the bent-waveguide facet, respectively. The result is attributed to the conjunct effects of the gain and the additional loss of the bent waveguide. A numerical simulation is performed to verify the qualitative explanation. It is shown that bent waveguide loss is an important factor that affects the output power of J-shaped superluminescent diode devices.

  5. al-Qaida Strategy, Ideology, Doctrine, and Media

    ScienceCinema

    Dr. Jarret Brachman

    2017-12-09

    Dr. Jarret Brachman, an internationally recognized al-Qaida specialist, author and public lecturer, shares his thoughts on a range of topics, including the differences involved in fighting insurgent groups versus terrorist organizations, the future of the global al-Qaida movement, and assessing America's efforts to combat al-Qaida. In his talk, Brachman focuses specifically on current trends in al-Qaida's military and messaging strategies, both from the perspective of the group's senior leadership and its regional commands. Presented on June 17, 2010.

  6. al-Qaida Strategy, Ideology, Doctrine, and Media

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Dr. Jarret Brachman

    Dr. Jarret Brachman, an internationally recognized al-Qaida specialist, author and public lecturer, shares his thoughts on a range of topics, including the differences involved in fighting insurgent groups versus terrorist organizations, the future of the global al-Qaida movement, and assessing America's efforts to combat al-Qaida. In his talk, Brachman focuses specifically on current trends in al-Qaida's military and messaging strategies, both from the perspective of the group's senior leadership and its regional commands. Presented on June 17, 2010.

  7. Liver X Receptor Genes Variants Modulate ALS Phenotype.

    PubMed

    Mouzat, Kevin; Molinari, Nicolas; Kantar, Jovana; Polge, Anne; Corcia, Philippe; Couratier, Philippe; Clavelou, Pierre; Juntas-Morales, Raul; Pageot, Nicolas; Lobaccaro, Jean -Marc A; Raoul, Cedric; Lumbroso, Serge; Camu, William

    2018-03-01

    Amyotrophic lateral sclerosis (ALS) is one of the most severe motor neuron (MN) disorders in adults. Phenotype of ALS patients is highly variable and may be influenced by modulators of energy metabolism. Recent works have implicated the liver X receptors α and β (LXRs), either in the propagation process of ALS or in the maintenance of MN survival. LXRs are nuclear receptors activated by oxysterols, modulating cholesterol levels, a suspected modulator of ALS severity. In a cohort of 438 ALS patients and 330 healthy controls, the influence of LXR genes on ALS risk and phenotype was studied using single nucleotide polymorphisms (SNPs). The two LXRα SNPs rs2279238 and rs7120118 were shown to be associated with age at onset in ALS patients. Consistently, homozygotes were twice more correlated than were heterozygotes to delayed onset. The onset was thus delayed by 3.9 years for rs2279238 C/T carriers and 7.8 years for T/T carriers. Similar results were obtained for rs7120118 (+2.1 years and +6.7 years for T/C and C/C genotypes, respectively). The LXRβ SNP rs2695121 was also shown to be associated with a 30% increase of ALS duration (p = 0.0055, FDR = 0.044). The tested genotypes were not associated with ALS risk. These findings add further evidence to the suspected implication of LXR genes in the disease process of ALS and might open new perspectives in ALS therapeutics.

  8. Kinetics of Al + H2O reaction: theoretical study.

    PubMed

    Sharipov, Alexander; Titova, Nataliya; Starik, Alexander

    2011-05-05

    Quantum chemical calculations were carried out to study the reaction of Al atom in the ground electronic state with H(2)O molecule. Examination of the potential energy surface revealed that the Al + H(2)O → AlO + H(2) reaction must be treated as a complex process involving two steps: Al + H(2)O → AlOH + H and AlOH + H → AlO + H(2). Activation barriers for these elementary reaction channels were calculated at B3LYP/6-311+G(3df,2p), CBS-QB3, and G3 levels of theory, and appropriate rate constants were estimated by using a canonical variational theory. Theoretical analysis exhibited that the rate constant for the Al + H(2)O → products reaction measured by McClean et al. must be associated with the Al + H(2)O → AlOH + H reaction path only. The process of direct HAlOH formation was found to be negligible at a pressure smaller than 100 atm.

  9. 27Al, 63Cu NMR spectroscopy and electrical transport in Heusler Cu-Mn-Al alloy powders

    NASA Astrophysics Data System (ADS)

    Nadutov, V. M.; Perekos, A. O.; Kokorin, V. V.; Trachevskii, V. V.; Konoplyuk, S. M.; Vashchuk, D. L.

    2018-02-01

    The ultrafine powder of the Heusler Cu-13,1Mn-12,6Al (wt.%) alloy produced by electrical spark dispersion (ESD) in ethanol and the pellets prepared by pressing of the powders and aged in various gas environment (air, Ar, vacuum) were studied by XRD, nuclear magnetic resonance, magnetic and electric transport methods. The constituent phases were identified as b.c.c. α-Cu-Mn-Al, f.c.c. γ-Cu-Mn-Al, Cu2MnAl, and oxides. The sizes of the coherently scattering domains (CSD) and the saturation magnetizations were in the range of 4-90 nm and 0-1.5 Am2/kg, respectively. 27Al and 63Cu NMR spectra of the powders and pellets have shown hyperfine structure caused by contributions from atomic nuclei of the constituent phases. The aging of pellets in different gas environments had effect on their phase composition but no effect on dispersion of the phases. In contrast to the as-cast alloy, electrical resistance of the pellets evidenced semiconducting behavior at elevated temperatures due to the presence of metal oxides formed on the surfaces of nanoparticles.

  10. Semisolid Microstructural Evolution during Partial Remelting of a Bulk Alloy Prepared by Cold Pressing of the Ti-Al-2024Al Powder Mixture

    PubMed Central

    Qin, Yahong; Chen, Tijun; Wang, Yingjun; Zhang, Xuezheng; Li, Pubo

    2016-01-01

    A new method, powder thixoforming, has been proposed to fabricate an in situ Al3Tip/2024Al composite. During partial remelting, the microstructural evolution of the bulk alloy prepared by cold pressing of the Ti, Al, 2024Al powder mixture was investigated, and the formation mechanism of the Al3Ti particles produced by the reaction between the Ti powder and the Al alloy melt is also discussed in detail. The results indicate that the microstructural evolution of the 2024 alloy matrix can be divided into three stages: a rapid coarsening of the powder grains; a formation of primary α-Al particles surrounded with a continuous liquid film; and a slight coarsening of the primary α-Al particles. Simultaneously, a reaction layer of Al3Ti can be formed on the Ti powder surface when the bulk is heated for 10 min at 640 °C The thickness (X) of the reaction layer increases with the time according to the parabolic law of X=−0.43t2+4.21t+0.17. The stress generated in the reaction layer due to the volume dilatation can be calculated by using the equation σAl3Ti=−EAl3Ti6(1−υAl3Ti)t2Al3TitTi(1R−1R0). Comparing the obtained data with the results of the drip experiment, the reaction rate for the Ti powder and Al powder mixture is greater than that for the Ti plate and Al alloy mixture, respectively.

  11. Effects of GaN/AlGaN/Sputtered AlN nucleation layers on performance of GaN-based ultraviolet light-emitting diodes

    PubMed Central

    Hu, Hongpo; Zhou, Shengjun; Liu, Xingtong; Gao, Yilin; Gui, Chengqun; Liu, Sheng

    2017-01-01

    We report on the demonstration of GaN-based ultraviolet light-emitting diodes (UV LEDs) emitting at 375 nm grown on patterned sapphire substrate (PSS) with in-situ low temperature GaN/AlGaN nucleation layers (NLs) and ex-situ sputtered AlN NL. The threading dislocation (TD) densities in GaN-based UV LEDs with GaN/AlGaN/sputtered AlN NLs were determined by high-resolution X-ray diffraction (XRD) and cross-sectional transmission electron microscopy (TEM), which revealed that the TD density in UV LED with AlGaN NL was the highest, whereas that in UV LED with sputtered AlN NL was the lowest. The light output power (LOP) of UV LED with AlGaN NL was 18.2% higher than that of UV LED with GaN NL owing to a decrease in the absorption of 375 nm UV light in the AlGaN NL with a larger bandgap. Using a sputtered AlN NL instead of the AlGaN NL, the LOP of UV LED was further enhanced by 11.3%, which is attributed to reduced TD density in InGaN/AlInGaN active region. In the sputtered AlN thickness range of 10–25 nm, the LOP of UV LED with 15-nm-thick sputtered AlN NL was the highest, revealing that optimum thickness of the sputtered AlN NL is around 15 nm. PMID:28294166

  12. Compatibility of AlN with liquid lithium

    NASA Astrophysics Data System (ADS)

    Terai, T.; Suzuki, A.; Yoneoka, T.; Mitsuyama, T.

    2000-12-01

    Development of ceramic coatings is one of the most important subjects in liquid blanket research and development. Compatibility of sintered AlN and AlN coatings with liquid lithium, a candidate breeding material, was investigated. Sintered AlN with or without the sintering aid of Y 2O 3 examined in lithium at 773 K for 1390 h showed a slight decrease in electrical resistivity because of a reduction in Al 2O 3 impurity, though AlN and Y 2O 3 components themselves were subject to no severe corrosion. On the other hand, AlN ceramic coatings on SUS430 with high resistivity (> 10 11 Ω m) fabricated by the RF sputtering method disappeared in liquid lithium at 773 K in 56 h. This may be because cracks were formed due to the difference in thermal expansion between the coatings and the substrate or because the oxide formed between the two was removed by liquid lithium.

  13. Trabajo Social en la Micro y Macro Práctica en el Contexto de la Tuberculosis

    PubMed Central

    Moya, Eva M.; Chavez-Baray, Silvia M.; Martínez, Omar

    2017-01-01

    Resumen El estudio de la problemática relacionada con la infección de tuberculosis (TB) en la frontera México-Estadounidense implica la consideración de tres aspectos complejos y entrelazados: la TB, una entidad patológica que debido a sus características epidemiológicas y patogénicas, resulta difícil de seguir y atender de manera completa; la zona fronteriza, zona geográfica y epidemiológica que entrelaza dos naciones, dos culturas, dos sistemas de salud y leyes diferentes; además del estigma, que implica más que tratamientos clínicos y abordajes de categorías de riesgo debido a la condición social y bajo conocimiento. Este trabajo narra diez estrategias realizadas en México y la frontera México-Estadounidense del año 2006 al 2013 como un esfuerzo de ampliar la comprensión de este fenómeno social y de salud pública conformado por una infección, un entorno físico y personas, también de la identificación y aplicación de prácticas competentes de abogacía y movilización social. Los trabajos realizados y presentados dan a conocer diferentes intervenciones para generar adherencia al tratamiento, mitigar el estigma relacionado con la infección de TB, mejorar la atención centrada en la persona e informar la relevancia del abordaje micro y macro de la salud y el trabajador social. PMID:29503982

  14. Improving Heart Healthy Lifestyles Among Participants in a Salud Para Su Corazón Promotores Model: The Mexican Pilot Study, 2009–2012

    PubMed Central

    Fernández-Gaxiola, Ana Cecilia; Pérez-Lizaur, Ana Bertha; Peyron, Rosa Adriana; Ayala, Carma

    2015-01-01

    Introduction In Mexico, cardiovascular disease and its risk factors are growing problems and major public health concerns. The objective of this study was to implement cardiovascular health promotion and disease prevention activities of the Salud para su Corazón model in a high-risk, impoverished, urban community in Mexico City. Methods We used a pretest–posttest (baseline to 12-week follow-up) design without a control group. Material from Salud para su Corazón was validated and delivered by promotores (community health workers) to community members from 6 geographic areas. Two validated, self-administered questionnaires that assessed participants’ knowledge and behaviors relating to heart health were administered. We used t tests and χ2 tests to evaluate pretest and posttest differences, by age group (≤60 and >60 years), for participants’ 3 heart-healthy habits, 3 types of physical activity, performance skills, and anthropometric and clinical measurements. Results A total of 452 (82%) adult participants completed the program. Heart-healthy habits from pretest to posttest varied by age group. “Taking action” to modify lifestyle behaviors increased among adults aged 60 or younger from 31.5% to 63.0% (P < .001) and among adults older than 60 from 30.0% to 45.0% (P < .001). Positive responses for cholesterol and fat consumption reduction were seen among participants 60 or younger (P = .03). Among those older than 60, salt reduction and weight control increased (P = .008). Mean blood glucose concentration among adults older than 60 decreased postintervention (P = .03). Conclusion Significant improvements in some heart-healthy habits were seen among adult participants. The model has potential to improve heart-healthy habits and facilitate behavioral change among high-risk adults. PMID:25764140

  15. Improved p-type conductivity in Al-rich AlGaN using multidimensional Mg-doped superlattices

    PubMed Central

    Zheng, T. C.; Lin, W.; Liu, R.; Cai, D. J.; Li, J. C.; Li, S. P.; Kang, J. Y.

    2016-01-01

    A novel multidimensional Mg-doped superlattice (SL) is proposed to enhance vertical hole conductivity in conventional Mg-doped AlGaN SL which generally suffers from large potential barrier for holes. Electronic structure calculations within the first-principle theoretical framework indicate that the densities of states (DOS) of the valence band nearby the Fermi level are more delocalized along the c-axis than that in conventional SL, and the potential barrier significantly decreases. Hole concentration is greatly enhanced in the barrier of multidimensional SL. Detailed comparisons of partial charges and decomposed DOS reveal that the improvement of vertical conductance may be ascribed to the stronger pz hybridization between Mg and N. Based on the theoretical analysis, highly conductive p-type multidimensional Al0.63Ga0.37N/Al0.51Ga0.49N SLs are grown with identified steps via metalorganic vapor-phase epitaxy. The hole concentration reaches up to 3.5 × 1018 cm−3, while the corresponding resistivity reduces to 0.7 Ω cm at room temperature, which is tens times improvement in conductivity compared with that of conventional SLs. High hole concentration can be maintained even at 100 K. High p-type conductivity in Al-rich structural material is an important step for the future design of superior AlGaN-based deep ultraviolet devices. PMID:26906334

  16. Comparison of dry sliding wear and friction behavior of Al6061/SiC PMMC with Al6061 alloy

    NASA Astrophysics Data System (ADS)

    Murthy, A. G. Shankara; Mehta, N. K.; Kumar, Pradeep

    2018-04-01

    Dry sliding wear and friction behavior tests were conducted on Al6061 alloy and Al6061/SiC particle reinforced metal matrix composites (PMMCs) reinforced with fine particles of 5, 10 and 15 µm size having 5,7.5 and 10% weight content fabricated by stir-casting route. Cylindrical sample pins produced as per ASTM standard were tested for various parameters like SiC size, weight content, load and sliding distance affecting the wear rate or resistance and friction. Results indicated that Al6061/SiCp composites exhibited good wear resistance compared to Al6061 alloy for the tested parameters.

  17. Constitutive Model Constants for Al7075-T651 and Al7075-T6

    NASA Astrophysics Data System (ADS)

    Brar, Nachhatter; Joshi, Vasant; Harris, Bryan

    2009-06-01

    Aluminum 7075-T651 and 7075-T6 are characterized at quasi-static and high strain rates to determine Johnson-Cook (J-C) strength and fracture model constants. Constitutive model constants are required as input to computer codes to simulate projectile (fragment) impact or similar impact events on structural components made of these material. J-C strength model constants (A, B, n, C, and m) for the two alloys are determined from tension stress-strain data at room and high temperature to 250^oC. J-C strength model constants for Al7075-T651 are: A=527 MPa, B=676 MPa, n=0.71, C=0.017, and m=1.61 and for Al7075-T6: A = 546 MPa, B = 674 MPa, n = 0.72, C = 0.059, and m =1.56. J-C fracture model constants are determined form quasi-static and high strain rate/high temperature tests on notched and smooth tension specimens. J-C fracture model constants for the two alloys are: Al7075-T651; D1 = 0.110, D2 = 0.573, D3= -3.4446, D4 = 0.016, and D 5= 1.099 and Al7075-T6; D1= 0.451 D2= -0.952 D3= -.068, D4 =0.036, and D5 = 0.697.

  18. Elevated Temperature Corrosion Studies of AlCrN and TiAlN Coatings by PAPVD on T91 Boiler Steel

    NASA Astrophysics Data System (ADS)

    Goyal, Lucky; Chawla, Vikas; Hundal, Jasbir Singh

    2017-11-01

    The present investigation discusses the hot corrosion behavior of AlCrN and TiAlN nano-coatings on T91 boiler steel by PAPVD process subjected to molten salt of Na2SO4-60%V2O5 at 900 °C for 50 cycles. Surface and cross-sectional studies were performed by AFM, SEM/EDS and XRD techniques to understand the corrosion kinetics and mechanism. T91 bare boiler steel as well as TiAlN-coated specimen has shown higher internal oxidation as well as weight gain. The better corrosion resistance of AlCrN-coated specimen has been observed by virtue of higher availability of Cr and Al in the oxide scale as well as adherent and dense coating. The betterment of AlCrN coating can be attributed to low internal oxidation as well as movement of Cr and Al toward oxide scale to form protective corrosion barriers.

  19. FREQUENCY OF ANTI- Toxocara spp. ANTIBODIES IN INDIVIDUALS ATTENDED BY THE CENTRO DE SALUD FAMILIAR AND ENVIRONMENTAL CONTAMINATION WITH Toxocara canis EGGS IN DOG FECES, IN THE COASTAL NIEBLA TOWN, CHILE

    PubMed Central

    VARGAS, Catalina; TORRES, Patricio; JERCIC, María Isabel; LOBOS, Marta; OYARCE, Alan; MIRANDA, Juan Carlos; AYALA, Salvador

    2016-01-01

    SUMMARY The frequency of anti-Toxocara spp. antibodies in individuals attended by the Centro de Salud Familiar in the coastal Niebla town, Chile, was related to the host and to environmental factors. IgG anti- Toxocara antibodies were detected with a commercial ELISA kit (SCIMEDX Corporation, USA). Samples with undetermined absorbance values were subjected to an additional ELISA standardized by the Instituto de Salud Pública, Chilean Health Ministry, a commercial ELISA (NOVATEC, Germany), and a commercial Western blot kit (LDBio Diagnostics, France). Hematological exams were performed using an automated blood counter and blood smears. Dog feces were collected from the ground along the main road in Niebla, including rural and urban locations. Ninety (25.4%) of the 355 examined individuals were positive by the ELISA test. The frequency of anti-Toxocara antibodies and the infection risk were significantly higher (p < 0.05) among those individuals ≥ 40 years old with respect to the 20-39 years old group, in individuals from rural locations, those who did not have a safe drinking water supply in the house or who presented blood eosinophilia. The proportion of positive samples of dog feces and the mean number of Toxocara canis eggs/g of feces in urban and rural areas were similar (p > 0.05). PMID:27680167

  20. FREQUENCY OF ANTI- Toxocara spp. ANTIBODIES IN INDIVIDUALS ATTENDED BY THE CENTRO DE SALUD FAMILIAR AND ENVIRONMENTAL CONTAMINATION WITH Toxocara canis EGGS IN DOG FECES, IN THE COASTAL NIEBLA TOWN, CHILE.

    PubMed

    Vargas, Catalina; Torres, Patricio; Jercic, María Isabel; Lobos, Marta; Oyarce, Alan; Miranda, Juan Carlos; Ayala, Salvador

    2016-09-22

    The frequency of anti-Toxocara spp. antibodies in individuals attended by the Centro de Salud Familiar in the coastal Niebla town, Chile, was related to the host and to environmental factors. IgG anti- Toxocara antibodies were detected with a commercial ELISA kit (SCIMEDX Corporation, USA). Samples with undetermined absorbance values were subjected to an additional ELISA standardized by the Instituto de Salud Pública, Chilean Health Ministry, a commercial ELISA (NOVATEC, Germany), and a commercial Western blot kit (LDBio Diagnostics, France). Hematological exams were performed using an automated blood counter and blood smears. Dog feces were collected from the ground along the main road in Niebla, including rural and urban locations. Ninety (25.4%) of the 355 examined individuals were positive by the ELISA test. The frequency of anti-Toxocara antibodies and the infection risk were significantly higher (p < 0.05) among those individuals ≥ 40 years old with respect to the 20-39 years old group, in individuals from rural locations, those who did not have a safe drinking water supply in the house or who presented blood eosinophilia. The proportion of positive samples of dog feces and the mean number of Toxocara canis eggs/g of feces in urban and rural areas were similar (p > 0.05).