A web based growth and yield systems for southeastern pine and hardwood stands

Treesearch

Jacob R. Beard; Thomas G. Matney; Emily B. Schultz; Stephen C. Grado; Charles O. Sabatia

2016-01-01

Faced with the challenges of maintaining customer-specified objectives and meeting deadlines, forest land managers must integrate various mensurational information sources for developing management scenarios. Cost efficient measures are a consideration to save both time and money for a client. While inventory data collection is time and money intensive, data processing...

Use of dominant tree heights in determining site index for Douglas-fir.

Treesearch

George R. Staebler

1948-01-01

Measuring heights of Douglas-fir trees for the determination of site index is a time-consuming job, especially in dense stands. Both dominant and codominant trees must be measured since site index curves represent the average height of dominants and codominants. It has been suggested that considerable time might be saved if only dominant trees were measured, since...

Metalclad Airship Hull Study. Volume 1 and Volume 2

DTIC Science & Technology

1976-12-01

37.5% weight saving of the hull skin with a maximim pressure of 8.75 in. of water column and maximum-minimum pressure ratio still at comfortable 3.5. The...overall height of 118.98 in.to no more than 100.Oin. with considerable weight saving . Instead of the geometrical height of main frames equal to (.108...changed slightly to obtain uniform spacing. This has negligible effect on the result, but saves a considerable analysis timie. For the purpose of this

Ideas that Work!. Retuning the Building Automation System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parker, Steven

A building automation system (BAS) can save considerable energy by effectively and efficiently operating building energy systems (fans, pumps, chillers boilers, etc.), but only when the BAS is properly set up and operated. Tuning, or retuning, the BAS is a cost effective process worthy of your time and attention.

Peer Taught Microcomputer Skills: An Untapped Resource for Stretching the Budget.

ERIC Educational Resources Information Center

Teer, Harold B., Jr.; And Others

1988-01-01

Discussion of the use of peer teachers to provide college students with microcomputer education focuses on a video course used to teach Lotus 1-2-3 spreadsheet software. Budget considerations are discussed, student and faculty reactions are described, and potential time savings to faculty are examined. (LRW)

Realization of the Energy Saving of the Environmental Examination Device Temperature Control System in Consideration of Temperature Characteristics

NASA Astrophysics Data System (ADS)

Onogaki, Hitoshi; Yokoyama, Shuichi

The temperature control of the environmental examination device has loss of the energy consumption to cool it while warming it. This paper proposed a tempareture control system method with energy saving for the enviromental examination device without using cooling in consideration of temperature characteristics.

31 CFR Appendix D to Part 359 - Tax Considerations

Code of Federal Regulations, 2011 CFR

2011-07-01

..., SERIES I Pt. 359, App. D Appendix D to Part 359—Tax Considerations 1. What are some general tax... subsequently acquired, and to any other obligations purchased on a discount basis, such as savings bonds of... owner. (d) The purchase of a Series I savings bonds as a gift may have gift tax consequences for the...

31 CFR Appendix D to Part 359 - Tax Considerations

Code of Federal Regulations, 2010 CFR

2010-07-01

..., SERIES I Pt. 359, App. D Appendix D to Part 359—Tax Considerations 1. What are some general tax... subsequently acquired, and to any other obligations purchased on a discount basis, such as savings bonds of... owner. (d) The purchase of a Series I savings bonds as a gift may have gift tax consequences for the...

[ASPECTS OF HEALTH-SAVING MOTIVATION IN CHILDREN OF THE PRESCHOOL GROUP].

PubMed

Grosheva, E S; Kartysheva, S I; Popova, O A

2015-01-01

The problem of education of culture of health in children ofpreschool age is actual and sufficiently complicated. It is important at this age stage to create in children the first knowledge and practical skills of a healthy lifestyle. The example of parents has considerable impact on adoption of health saving behavior of a child. For identification of motivations of parents in the sphere of protection and strengthening of health of their children there was performed questionnaire survey of parents of preschool children according to specially developed questionnaire. A half of parents are established to be unable to devote sufficient time to health of the child due to engrossment. A considerable portion of parents doesn't keep a healthy lifestyle, differs in low medical and sports activity. The main motivation of parents is the motivation on recovery of the child after the disease, but not on preservation, strengthening and development of health.

[Preparation and administration of cytotoxic drugs: prickly innovation].

PubMed

Mullot, H; Simon, L; Payen, C; Gentes, P

2005-06-01

The requirement for safe and optimal administration of cytotoxic drugs led us to test a new product manufactured by Codan. The transfer set (CONNECT SET) and the administration set (CYTO-AD-SET) were assessed successively by pharmacist assistance within a centralized unit for cytotoxic drug preparation and by the nursing staff in an ambulatory unit. Transfer sets can be handled in the centralized units without using needles, but with an increased sterilization load and production cost. Assessment of the administration sets demonstrated time saving for the nursing staff. These materials require significant expenditures, careful training, and a change in treatment routine, but provide important time savings for the nursing staff and considerable improvement in the safety of handling cytotoxic drugs.

32 CFR 644.23 - Real Estate Planning Documents.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Department of the Air Force land acquisition programs for runways and approach zones and are not applicable... the Chief of Engineers except in those cases in which the major command submits a copy to Headquarters.... Considerable time, effort and funds can be saved if REPRs are foregone in those cases involving acquisition of...

32 CFR 644.23 - Real Estate Planning Documents.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Department of the Air Force land acquisition programs for runways and approach zones and are not applicable... the Chief of Engineers except in those cases in which the major command submits a copy to Headquarters.... Considerable time, effort and funds can be saved if REPRs are foregone in those cases involving acquisition of...

32 CFR 644.23 - Real Estate Planning Documents.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Department of the Air Force land acquisition programs for runways and approach zones and are not applicable... the Chief of Engineers except in those cases in which the major command submits a copy to Headquarters.... Considerable time, effort and funds can be saved if REPRs are foregone in those cases involving acquisition of...

Don't Gamble with Y2K Compliance.

ERIC Educational Resources Information Center

Sturgeon, Julie

1999-01-01

Examines one school district's (Clark County, Nevada) response to the Y2K computer problem and provides tips on time-saving Y2K preventive measures other school districts can use. Explains how the district de-bugged its computer system including mainframe considerations and client-server applications. Highlights office equipment and teaching…

The Budget Impact of Biosimilar Infliximab (Remsima®) for the Treatment of Autoimmune Diseases in Five European Countries.

PubMed

Jha, Ashok; Upton, Alex; Dunlop, William C N; Akehurst, Ron

2015-08-01

Inflammatory autoimmune diseases (rheumatoid arthritis, ankylosing spondylitis, Crohn's disease, ulcerative colitis, psoriasis, and psoriatic arthritis) have a considerable impact on patients' quality of life and healthcare budgets. Biosimilar infliximab (Remsima(®)) has been authorized by the European Medicines Agency for the management of inflammatory autoimmune diseases based on a data package demonstrating efficacy, safety, and quality comparable to the reference infliximab product (Remicade(®)). This analysis aims to estimate the 1-year budget impact of the introduction of Remsima in five European countries. A budget impact model for the introduction of Remsima in Germany, the UK, Italy, the Netherlands, and Belgium was developed over a 1-year time horizon. Infliximab-naïve and switch patient groups were considered. Only direct drug costs were included. The model used the drug-acquisition cost of Remicade. The list price of Remsima was not known at the time of the analysis, and was assumed to be 10-30% less than that of Remicade. Key variables were tested in the sensitivity analysis. The annual cost savings resulting from the introduction of Remsima were projected to range from €2.89 million (Belgium, 10% discount) to €33.80 million (Germany, 30% discount). If any such savings made were used to treat additional patients with Remsima, 250 (Belgium, 10% discount) to 2602 (Germany, 30% discount) additional patients could be treated. The cumulative cost savings across the five included countries and the six licensed disease areas were projected to range from €25.79 million (10% discount) to €77.37 million (30% discount). Sensitivity analyses showed the number of patients treated with infliximab to be directly correlated with projected cost savings, with disease prevalence and patient weight having a smaller impact, and incidence the least impact. The introduction of Remsima could lead to considerable drug cost-related savings across the six licensed disease areas in the five European countries. Mundipharma International Ltd.

The High Cost of Saving Energy Dollars.

ERIC Educational Resources Information Center

Rose, Patricia

1985-01-01

In alternative financing a private company provides the capital and expertise for improving school energy efficiency. Savings are split between the school system and the company. Options for municipal leasing, cost sharing, and shared savings are explained along with financial, procedural, and legal considerations. (MLF)

Reagent and labor cost optimization through automation of fluorescence in situ hybridization (FISH) with the VP 2000: an Italian case study.

PubMed

Zanatta, Lucia; Valori, Laura; Cappelletto, Eleonora; Pozzebon, Maria Elena; Pavan, Elisabetta; Dei Tos, Angelo Paolo; Merkle, Dennis

2015-02-01

In the modern molecular diagnostic laboratory, cost considerations are of paramount importance. Automation of complex molecular assays not only allows a laboratory to accommodate higher test volumes and throughput but also has a considerable impact on the cost of testing from the perspective of reagent costs, as well as hands-on time for skilled laboratory personnel. The following study tracked the cost of labor (hands-on time) and reagents for fluorescence in situ hybridization (FISH) testing in a routine, high-volume pathology and cytogenetics laboratory in Treviso, Italy, over a 2-y period (2011-2013). The laboratory automated FISH testing with the VP 2000 Processor, a deparaffinization, pretreatment, and special staining instrument produced by Abbott Molecular, and compared hands-on time and reagent costs to manual FISH testing. The results indicated significant cost and time saving when automating FISH with VP 2000 when more than six FISH tests were run per week. At 12 FISH assays per week, an approximate total cost reduction of 55% was observed. When running 46 FISH specimens per week, the cost saving increased to 89% versus manual testing. The results demonstrate that the VP 2000 processor can significantly reduce the cost of FISH testing in diagnostic laboratories. © 2014 Society for Laboratory Automation and Screening.

Cost-minimization analysis favors outpatient quick diagnosis unit over hospitalization for the diagnosis of potentially serious diseases.

PubMed

Sanclemente-Ansó, Carmen; Bosch, Xavier; Salazar, Albert; Moreno, Ramón; Capdevila, Cristina; Rosón, Beatriz; Corbella, Xavier

2016-05-01

Quick diagnosis units (QDUs) are a promising alternative to conventional hospitalization for the diagnosis of suspected serious diseases, most commonly cancer and severe anemia. Although QDUs are as effective as hospitalization in reaching a timely diagnosis, a full economic evaluation comparing both approaches has not been reported. To evaluate the costs of QDU vs. conventional hospitalization for the diagnosis of cancer and anemia using a cost-minimization analysis on the proven assumption that health outcomes of both approaches were equivalent. Patients referred to the QDU of Bellvitge University Hospital of Barcelona over 51 months with a final diagnosis of severe anemia (unrelated to malignancy), lymphoma, and lung cancer were compared with patients hospitalized for workup with the same diagnoses. The total cost per patient until diagnosis was analyzed. Direct and non-direct costs of QDU and hospitalization were compared. Time to diagnosis in QDU patients (n=195) and length-of-stay in hospitalized patients (n=237) were equivalent. There were considerable costs savings from hospitalization. Highest savings for the three groups were related to fixed direct costs of hospital stays (66% of total savings). Savings related to fixed non-direct costs of structural and general functioning were 33% of total savings. Savings related to variable direct costs of investigations were 1% of total savings. Overall savings from hospitalization of all patients were €867,719.31. QDUs appear to be a cost-effective resource for avoiding unnecessary hospitalization in patients with anemia and cancer. Internists, hospital executives, and healthcare authorities should consider establishing this model elsewhere. Copyright © 2015. Published by Elsevier B.V.

Oral health promotion: the economic benefits to the NHS of increased use of sugarfree gum in the UK.

PubMed

Claxton, L; Taylor, M; Kay, E

2016-02-12

The effect of sugarfree gum (SFG) on the prevention of dental caries has been established for some time. With increased constraints placed on healthcare budgets, the importance of economic considerations in decision-making about oral health interventions has increased. The aim of this study was to demonstrate the potential cost savings in dental care associated with increased levels of SFG usage. The analysis examined the amount of money which would hypothetically be saved if the UK 12-year-old population chewed more SFG. The number of sticks chewed per year and the caries risk reduction were modelled to create a dose response curve. The costs of tooth restoration, tooth extraction in primary care settings and under general anaesthetic were considered, and the effects of caries reduction on these costs calculated. If all members of the UK 12-year-old population chewed SFG frequently (twice a day), the potential cost savings for the cohort over the course of one year were estimated to range from £1.2 to £3.3 million and if they chewed three times a day, £8.2 million could be saved each year. Sensitivity analyses of the key parameters demonstrated that cost savings would still be likely to be observed even in scenarios with less significant increases in SFG use. This study shows that if levels of SFG usage in the teenage population in the UK could be increased, substantial cost savings might be achieved.

The Displacement Effect of Public Pensions on the Accumulation of Financial Assets

PubMed Central

HURD, MICHAEL; MICHAUD, PIERRE-CARL; ROHWEDDER, SUSANN

2013-01-01

The generosity of public pensions may depress private savings and provide incentives to retire early. While there is plenty of evidence supporting the latter effect, there remains considerable controversy whether public pensions crowd out private savings. This paper uses international micro-datasets collected over recent years to investigate whether public pensions displace private savings. The identification strategy relies not only on cross-country differences in generosity but also on differences in the progressivity or non-linearity of pension formulas across countries. We estimate that an extra dollar of pension wealth depresses accumulated financial assets around the time of retirement by 22 cents. An extra ten thousand dollars in public pension wealth reduces the average retirement age by roughly one month which implies an elasticity of retirement years with respect to pension wealth of −0.15. PMID:23606775

Evaluation of ERTS-1 data for acquiring land use data of northern Megalopolis. [New England

NASA Technical Reports Server (NTRS)

Simpson, R. B.; Lindgren, D. T.; Goldstein, W. D.

1974-01-01

State planners are increasingly becoming interested in ERTS as a possible method for acquiring land use data. An important consideration to them is whether ERTS can provide such data at a savings in both time and money over alternative systems. A preliminary evaluation of ERTS as a planning tool is given.

The impact of labor-saving technology on first birth intervals in rural Ethiopia.

PubMed

Gibson, Mhairi; Mace, Ruth

2002-02-01

Across the developing world labor-saving technologies introduce considerable savings in the time and energy that women allocate to work. Hormonal studies on natural fertility populations indicate that such a reduction in energetic expenditure (rather than improved nutritional status alone) can lead to increased ovarian function. Other qualitative studies have highlighted a link between labor-saving technology and behavioral changes affecting subsequent age at marriage, which may affect fertility. This biodemographic study was designed to investigate whether these physiological and behavioral changes affect fertility at a population level by focusing on a recent water development scheme in Southern Ethiopia. The demographic consequences of a reduction in women's workload following the installation of water points, specifically the variation in length of first birth interval (time lapsed between marriage and first birth), are investigated. First birth interval length is closely associated with lifetime fertility in populations that do not practice contraception, longer intervals being associated with lower fertility. Using life tables and multivariate hazard modeling techniques a number of significant predictors of first birth interval length are identified. Covariates such as age at marriage, season of marriage, village ecology, and access to improved water supply have significant effects on variation in first birth intervals. When entered into models as a time-varying covariate, access to a water tap stand is associated with an immediate reduction in length of first birth intervals.

Scheduling for energy and reliability management on multiprocessor real-time systems

NASA Astrophysics Data System (ADS)

Qi, Xuan

Scheduling algorithms for multiprocessor real-time systems have been studied for years with many well-recognized algorithms proposed. However, it is still an evolving research area and many problems remain open due to their intrinsic complexities. With the emergence of multicore processors, it is necessary to re-investigate the scheduling problems and design/develop efficient algorithms for better system utilization, low scheduling overhead, high energy efficiency, and better system reliability. Focusing cluster schedulings with optimal global schedulers, we study the utilization bound and scheduling overhead for a class of cluster-optimal schedulers. Then, taking energy/power consumption into consideration, we developed energy-efficient scheduling algorithms for real-time systems, especially for the proliferating embedded systems with limited energy budget. As the commonly deployed energy-saving technique (e.g. dynamic voltage frequency scaling (DVFS)) will significantly affect system reliability, we study schedulers that have intelligent mechanisms to recuperate system reliability to satisfy the quality assurance requirements. Extensive simulation is conducted to evaluate the performance of the proposed algorithms on reduction of scheduling overhead, energy saving, and reliability improvement. The simulation results show that the proposed reliability-aware power management schemes could preserve the system reliability while still achieving substantial energy saving.

Aerodynamics of a Cycling Team in a Time Trial: Does the Cyclist at the Front Benefit?

ERIC Educational Resources Information Center

Iniguez-de-la Torre, A.; Iniguez, J.

2009-01-01

When seasonal journeys take place in nature, birds and fishes migrate in groups. This provides them not only with security but also a considerable saving of energy. The power they need to travel requires overcoming aerodynamic or hydrodynamic drag forces, which can be substantially reduced when the group travels in an optimal arrangement. Also in…

Save Social Security Act

THOMAS, 112th Congress

Rep. McCotter, Thaddeus G. [R-MI-11

2011-09-12

House - 09/19/2011 Referred for a period ending not later than September 19, 2011, (or for a later time if the Chairman so designates) to the Subcommittee on Social Security, in each case for consideration of such provisions as fall within the jurisdiction of the subcommittee... (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Oral health promotion: the economic benefits to the NHS of increased use of sugarfree gum in the UK

PubMed Central

Claxton, L.; Taylor, M.; Kay, E.

2016-01-01

Introduction The effect of sugarfree gum (SFG) on the prevention of dental caries has been established for some time. With increased constraints placed on healthcare budgets, the importance of economic considerations in decision-making about oral health interventions has increased. The aim of this study was to demonstrate the potential cost savings in dental care associated with increased levels of SFG usage. Methods The analysis examined the amount of money which would hypothetically be saved if the UK 12-year-old population chewed more SFG. The number of sticks chewed per year and the caries risk reduction were modelled to create a dose response curve. The costs of tooth restoration, tooth extraction in primary care settings and under general anaesthetic were considered, and the effects of caries reduction on these costs calculated. Results If all members of the UK 12-year-old population chewed SFG frequently (twice a day), the potential cost savings for the cohort over the course of one year were estimated to range from £1.2 to £3.3 million and if they chewed three times a day, £8.2 million could be saved each year. Sensitivity analyses of the key parameters demonstrated that cost savings would still be likely to be observed even in scenarios with less significant increases in SFG use. Conclusion This study shows that if levels of SFG usage in the teenage population in the UK could be increased, substantial cost savings might be achieved. PMID:26868801

A model for consolidation of clinical microbiology laboratory services within a multihospital health-care system.

PubMed

Carter, Elliot; Stubbs, James R; Bennett, Betsy

2004-01-01

To determine the cost-effectiveness of consolidating clinical microbiology services in a three-hospital health-care network while maintaining high-quality laboratory services, a retrospective review of the total costs of maintaining separate clinical microbiology laboratories within our health-care system was compared to the cost of providing these services after consolidation. Turnaround times before and after consolidation were compared to assess efficiency of the consolidated services. Input of clinicians was also solicited to ensure that quality of services and customer satisfaction remained high. The results of the consolidation project show that the net fiscal saving because of consolidation of clinical microbiology services within our health-care system will be approximately 100,000 dollars per fiscal year. This value includes increased courier charges as well as personnel savings. Although fiscal savings are an integral part of any laboratory consolidation plan, the financial considerations must be balanced by quality of service. The response to consolidation from clinicians was decidedly mixed before implementation of the plan because of fear of increased turnaround times and limited access to laboratory information. The consolidation process, however, was smooth with few physician complaints. The consolidation of our clinical microbiology services illustrates that significant financial savings can be achieved without compromise of efficiency or quality of service.

Dynamic modeling of potentially conflicting energy reduction strategies for residential structures in semi-arid climates.

PubMed

Hester, Nathan; Li, Ke; Schramski, John R; Crittenden, John

2012-04-30

Globally, residential energy consumption continues to rise due to a variety of trends such as increasing access to modern appliances, overall population growth, and the overall increase of electricity distribution. Currently, residential energy consumption accounts for approximately one-fifth of total U.S. energy consumption. This research analyzes the effectiveness of a range of energy-saving measures for residential houses in semi-arid climates. These energy-saving measures include: structural insulated panels (SIP) for exterior wall construction, daylight control, increased window area, efficient window glass suitable for the local weather, and several combinations of these. Our model determined that energy consumption is reduced by up to 6.1% when multiple energy savings technologies are combined. In addition, pre-construction technologies (structural insulated panels (SIPs), daylight control, and increased window area) provide roughly 4 times the energy savings when compared to post-construction technologies (window blinds and efficient window glass). The model also illuminated the importance variations in local climate and building configuration; highlighting the site-specific nature of this type of energy consumption quantification for policy and building code considerations. Published by Elsevier Ltd.

Program Helps Decompose Complex Design Systems

NASA Technical Reports Server (NTRS)

Rogers, James L., Jr.; Hall, Laura E.

1994-01-01

DeMAID (A Design Manager's Aid for Intelligent Decomposition) computer program is knowledge-based software system for ordering sequence of modules and identifying possible multilevel structure for design problem. Groups modular subsystems on basis of interactions among them. Saves considerable money and time in total design process, particularly in new design problem in which order of modules has not been defined. Available in two machine versions: Macintosh and Sun.

Optimal Self-Tuning PID Controller Based on Low Power Consumption for a Server Fan Cooling System.

PubMed

Lee, Chengming; Chen, Rongshun

2015-05-20

Recently, saving the cooling power in servers by controlling the fan speed has attracted considerable attention because of the increasing demand for high-density servers. This paper presents an optimal self-tuning proportional-integral-derivative (PID) controller, combining a PID neural network (PIDNN) with fan-power-based optimization in the transient-state temperature response in the time domain, for a server fan cooling system. Because the thermal model of the cooling system is nonlinear and complex, a server mockup system simulating a 1U rack server was constructed and a fan power model was created using a third-order nonlinear curve fit to determine the cooling power consumption by the fan speed control. PIDNN with a time domain criterion is used to tune all online and optimized PID gains. The proposed controller was validated through experiments of step response when the server operated from the low to high power state. The results show that up to 14% of a server's fan cooling power can be saved if the fan control permits a slight temperature response overshoot in the electronic components, which may provide a time-saving strategy for tuning the PID controller to control the server fan speed during low fan power consumption.

Implicit discount rates of vascular surgeons in the management of abdominal aortic aneurysms.

PubMed

Enemark, U; Lyttkens, C H; Troëng, T; Weibull, H; Ranstam, J

1998-01-01

A growing empirical literature has investigated attitudes towards discounting of health benefits with regard to social choices of life-saving and health-improving measures and individuals' time preferences for the management of their own health. In this study, the authors elicited the time preferences of vascular surgeons in the context of management of small abdominal aortic aneurysms, for which the choice between early elective surgery and watchful waiting is not straightforward. They interviewed 25 of a random sample of 30 Swedish vascular surgeons. Considerable variation in the time preferences was found in the choices between watchful waiting and surgical intervention among the otherwise very homogeneous group of surgeons. The discount rates derived ranged from 5.3% to 19.4%. The median discount rate (10.4%) is similar to those usually reported for social choices concerning life-saving measures. The surgeons who were employed in university hospitals had higher discount rates than did their colleagues in county and district hospitals.

Clinical pharmacists in general practice: an initial evaluation of activity in one English primary care organisation.

PubMed

Bush, Joseph; Langley, Christopher A; Jenkins, Duncan; Johal, Jaspal; Huckerby, Clair

2017-12-27

This aim of this research was to characterise the breadth and volume of activity conducted by clinical pharmacists in general practice in Dudley Clinical Commissioning Group (CCG), and to provide quantitative estimates of both the savings in general practitioner (GP) time and the financial savings attributable to such activity. This descriptive observational study retrospectively analysed quantitative data collected by Dudley CCG concerning the activity of clinical pharmacists in GP practices during 2015. Over the 9-month period for which data were available, the 5.4 whole time equivalent clinical pharmacists operating in GP practices within Dudley CCG identified 23 172 interventions. Ninety-five per cent of the interventions identified were completed within the study period saving the CCG in excess of £1 000 000. During the 4 months for which resource allocation data were available, the clinical pharmacists saved 628 GP appointments plus an additional 647 h that GPs currently devote to medication review and the management of repeat prescribing. This research suggests that clinical pharmacists in general practice in Dudley CCG are able to deliver clinical interventions efficiently and in high volume. In doing so, clinical pharmacists were able to generate considerable financial returns on investment. Further work is recommended to examine the effectiveness and cost-effectiveness of clinical pharmacists in general practice in improving outcomes for patients. © 2017 Royal Pharmaceutical Society.

Laser Peening Effects on Friction Stir Welding

NASA Technical Reports Server (NTRS)

Hatameleh, Omar

2009-01-01

The laser peening process can result in considerable improvement to crack initiation, propagation, and mechanical properties in FSW which equates to longer hardware service life Processed hardware safety is improved by producing higher failure tolerant hardware, and reducing risk. Lowering hardware maintenance cost produces longer hardware service life, and lower hardware down time. Application of this proposed technology will result in substantial benefits and savings throughout the life of the treated components

An effective online data monitoring and saving strategy for large-scale climate simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xian, Xiaochen; Archibald, Rick; Mayer, Benjamin

Large-scale climate simulation models have been developed and widely used to generate historical data and study future climate scenarios. These simulation models often have to run for a couple of months to understand the changes in the global climate over the course of decades. This long-duration simulation process creates a huge amount of data with both high temporal and spatial resolution information; however, how to effectively monitor and record the climate changes based on these large-scale simulation results that are continuously produced in real time still remains to be resolved. Due to the slow process of writing data to disk,more » the current practice is to save a snapshot of the simulation results at a constant, slow rate although the data generation process runs at a very high speed. This study proposes an effective online data monitoring and saving strategy over the temporal and spatial domains with the consideration of practical storage and memory capacity constraints. Finally, our proposed method is able to intelligently select and record the most informative extreme values in the raw data generated from real-time simulations in the context of better monitoring climate changes.« less

An effective online data monitoring and saving strategy for large-scale climate simulations

DOE PAGES

Xian, Xiaochen; Archibald, Rick; Mayer, Benjamin; ...

2018-01-22

Large-scale climate simulation models have been developed and widely used to generate historical data and study future climate scenarios. These simulation models often have to run for a couple of months to understand the changes in the global climate over the course of decades. This long-duration simulation process creates a huge amount of data with both high temporal and spatial resolution information; however, how to effectively monitor and record the climate changes based on these large-scale simulation results that are continuously produced in real time still remains to be resolved. Due to the slow process of writing data to disk,more » the current practice is to save a snapshot of the simulation results at a constant, slow rate although the data generation process runs at a very high speed. This study proposes an effective online data monitoring and saving strategy over the temporal and spatial domains with the consideration of practical storage and memory capacity constraints. Finally, our proposed method is able to intelligently select and record the most informative extreme values in the raw data generated from real-time simulations in the context of better monitoring climate changes.« less

Nonlinear Analysis of a Bolted Marine Riser Connector Using NASTRAN Substructuring

NASA Technical Reports Server (NTRS)

Fox, G. L.

1984-01-01

Results of an investigation of the behavior of a bolted, flange type marine riser connector is reported. The method used to account for the nonlinear effect of connector separation due to bolt preload and axial tension load is described. The automated multilevel substructing capability of COSMIC/NASTRAN was employed at considerable savings in computer run time. Simplified formulas for computer resources, i.e., computer run times for modules SDCOMP, FBS, and MPYAD, as well as disk storage space, are presented. Actual run time data on a VAX-11/780 is compared with the formulas presented.

THE AUXILIARY TREATMENT OF PSYCHOTIC WOMEN—Group Therapy for Their Husbands

PubMed Central

Gordon, Gene; Bowman, Karl M.

1953-01-01

Group therapy for the husbands of hospitalized psychotic women relieved the anxiety and feeling of guilt of the husbands and led to better communication between husband and wife. It was particularly helpful just before and after the wife came home from the hospital. The group meetings saved various members of the hospital staff considerable time which they otherwise would have had to devote to the husbands individually. PMID:13042665

Economic considerations in the use of inhaled anesthetic agents.

PubMed

Golembiewski, Julie

2010-04-15

To describe the components of and factors contributing to the costs of inhaled anesthesia, basis for quantifying and comparing these costs, and practical strategies for performing pharmacoeconomic analyses and reducing the costs of inhaled anesthetic agents. Inhaled anesthesia can be costly, and some of the variable costs, including fresh gas flow rates and vaporizer settings, are potential targets for cost savings. The use of a low fresh gas flow rate maximizes rebreathing of exhaled anesthetic gas and is less costly than a high flow rate, but it provides less control of the level of anesthesia. The minimum alveolar concentration (MAC) hour is a measure that can be used to compare the cost of inhaled anesthetic agents at various fresh gas flow rates. Anesthesia records provide a sense of patterns of inhaled anesthetic agent use, but the amount of detail can be limited. Cost savings have resulted from efforts to reduce the direct costs of inhaled anesthetic agents, but reductions in indirect costs through shortened times to patient recovery and discharge following the judicious use of these agents are more difficult to demonstrate. The patient case mix, fresh gas flow rates typically used during inhaled anesthesia, availability and location of vaporizers, and anesthesia care provider preferences and practices should be taken into consideration in pharmacoeconomic evaluations and recommendations for controlling the costs of inhaled anesthesia. Understanding factors that contribute to the costs of inhaled anesthesia and considering those factors in pharmacoeconomic analyses and recommendations for use of these agents can result in cost savings.

Restricted Collision List method for faster Direct Simulation Monte-Carlo (DSMC) collisions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Macrossan, Michael N., E-mail: m.macrossan@uq.edu.au

The ‘Restricted Collision List’ (RCL) method for speeding up the calculation of DSMC Variable Soft Sphere collisions, with Borgnakke–Larsen (BL) energy exchange, is presented. The method cuts down considerably on the number of random collision parameters which must be calculated (deflection and azimuthal angles, and the BL energy exchange factors). A relatively short list of these parameters is generated and the parameters required in any cell are selected from this list. The list is regenerated at intervals approximately equal to the smallest mean collision time in the flow, and the chance of any particle re-using the same collision parameters inmore » two successive collisions is negligible. The results using this method are indistinguishable from those obtained with standard DSMC. The CPU time saving depends on how much of a DSMC calculation is devoted to collisions and how much is devoted to other tasks, such as moving particles and calculating particle interactions with flow boundaries. For 1-dimensional calculations of flow in a tube, the new method saves 20% of the CPU time per collision for VSS scattering with no energy exchange. With RCL applied to rotational energy exchange, the CPU saving can be greater; for small values of the rotational collision number, for which most collisions involve some rotational energy exchange, the CPU may be reduced by 50% or more.« less

The effect of new biosimilars in rheumatology and gastroenterology specialities on UK healthcare budgets: Results of a budget impact analysis.

PubMed

Aladul, Mohammed I; Fitzpatrick, Raymond W; Chapman, Stephen R

2018-05-15

The approval of new biosimilars of infliximab, etanercept and adalimumab by the European Medicines Agency is expected to produce further cost savings to the healthcare system budget. This study aimed to estimate the budget impact of the introduction of new biosimilars Flixabi ® , Erelzi ® , Solymbic ® , Amgevita ® and Imraldi ® in rheumatology and gastroenterology specialities in the UK. A published budget impact model was adapted to estimate the expected cost savings following the entry of new biosimilars Flixabi ® , Erelzi ® , Solymbic ® , Amgevita ® and Imraldi ® in the UK over three-year time horizon. This model was based on retrospective market shares of biologics used in rheumatology and gastroenterology which were derived from DEFINE Software and healthcare professional perspectives. The model predicted that infliximab and etanercept biosimilars would replace their corresponding reference agents by 2020. Adalimumab biosimilars were predicted to achieve 19% of the rheumatology and gastroenterology market by 2020. Without the introduction of further biosimilars, the model predicted a reduction in expenditure of £44 million on biologics over the next three years. With the entry of Flixabi ® , Erelzi ® , Solymbic ® , Amgevita ® and Imraldi ® the model estimates cumulative savings of £285 million by 2020. The introduction of new infliximab, etanercept and adalimumab biosimilars will be associated with considerable cost savings and have a substantial favourable impact on the UK NHS budget. The number of biosimilars and time of entry of is critical to create competition which will result in maximum cost savings. Copyright © 2018 Elsevier Inc. All rights reserved.

31 CFR Appendix to Part 351 - Tax Considerations

Code of Federal Regulations, 2010 CFR

2010-07-01

.... 351, App. A Appendix to Part 351—Tax Considerations 1. What are some general tax considerations... any other obligations purchased on a discount basis. (b) Changing methods. If you use the cash basis... primary owner. (d) The purchase of a Series EE savings bond as a gift may have gift tax consequences. ...

31 CFR Appendix to Part 351 - Tax Considerations

Code of Federal Regulations, 2011 CFR

2011-07-01

.... 351, App. A Appendix to Part 351—Tax Considerations 1. What are some general tax considerations... any other obligations purchased on a discount basis. (b) Changing methods. If you use the cash basis... primary owner. (d) The purchase of a Series EE savings bond as a gift may have gift tax consequences. ...

Software engineering with application-specific languages

NASA Technical Reports Server (NTRS)

Campbell, David J.; Barker, Linda; Mitchell, Deborah; Pollack, Robert H.

1993-01-01

Application-Specific Languages (ASL's) are small, special-purpose languages that are targeted to solve a specific class of problems. Using ASL's on software development projects can provide considerable cost savings, reduce risk, and enhance quality and reliability. ASL's provide a platform for reuse within a project or across many projects and enable less-experienced programmers to tap into the expertise of application-area experts. ASL's have been used on several software development projects for the Space Shuttle Program. On these projects, the use of ASL's resulted in considerable cost savings over conventional development techniques. Two of these projects are described.

Historic Schools: A Roadmap for Saving Your School.

ERIC Educational Resources Information Center

National Trust for Historic Preservation, Washington, DC.

This brief suggests that not every historic school can or even should be saved, but all too often, historicschools and options for renovation are routinely dismissed without full consideration of alternatives or community input. The article further asserts that many schools are either abandoned ordemolished simply because of their age, as school…

Compressive behavior of energy-saving fired facing brick composite wall

NASA Astrophysics Data System (ADS)

Guo, Kai; Wu, Cai

2018-03-01

The energy-saving fired facing brick composite wall has a broad development prospects due to its merits of thermal insulation, energy conservation, beautiful, and natural. The construction and characteristics of this wall are introduced and analyzed in this paper. Experimental studies of samples are also conducted to investigate its compressive performance. The results show that the energy-saving fired facing brick composite wall has high compressive capacity. It has considerable application prospect, the study in this paper provides foundation to further studies.

Strategic Design for Delivery with Linked Transportation Assets : Trucks and Drones

DOT National Transportation Integrated Search

2018-01-01

Home delivery by drones as an alternative or complement to traditional delivery by trucks is attracting considerable attention from major retailers and services, as well as startups. While drone delivery may offer considerable economic savings, the f...

Practical use of a word processor in a histopathology laboratory.

PubMed Central

Briggs, J C; Ibrahim, N B; Mackintosh, I; Norris, D

1982-01-01

Some of the facilities available with a commercially purchased word processing program, linked to a DEC PDP 11/23 computer are described, together with an account of the practical histopathological use. The system is based on a share of the computer with a Clinical Chemistry Department. Development was time-consuming and required the constant availability of the Department of Physics. However, once working, considerable saving in secretarial time has resulted and a number of projects have been started which would not have been contemplated without the use of the word processor and its linked computer. Images PMID:7068906

Technology Prioritization: Transforming the U.S. Building Stock to Embrace Energy Efficiency

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abdelaziz, Omar; Farese, Philip; Abramson, Alexis

2013-01-01

The U.S. Buildings sector is responsible for about 40% of the national energy expenditures. This is due in part to wasteful use of resources and limited considerations made for energy efficiency during the design and retrofit phases. Recent studies have indicated the potential for up to 30-50% energy savings in the U.S. buildings sector using currently available technologies. This paper discusses efforts to accelerate the transformation in the U.S. building energy efficiency sector using a new technology prioritization framework. The underlying analysis examines building energy use micro segments using the Energy Information Administration Annual Energy Outlook and other publically availablemore » information. The tool includes a stock-and-flow model to track stock vintage and efficiency levels with time. The tool can be used to investigate energy efficiency measures under a variety of scenarios and has a built-in energy accounting framework to prevent double counting of energy savings within any given portfolio. This tool is developed to inform decision making and estimate long term potential energy savings for different market adoption scenarios.« less

Practical aspects of telehealth: financial considerations.

PubMed

Loh, P K; Sabesan, S; Allen, D; Caldwell, P; Mozer, R; Komesaroff, P A; Talman, P; Williams, M; Shaheen, N; Grabinski, O; Withnall, D

2013-07-01

The second in a series of articles about the practical aspects of telehealth, this paper includes information and a case history on the cost-benefits for patients and practitioners using telehealth. The case history demonstrates that telehealth can save travel time for patients, carers and specialists, and can reduce out-of-pocket expenses. The practical aspects of telehealth article series considers the contextual, clinical, technical and ethical components of online video consultations. © 2013 The Authors; Internal Medicine Journal © 2013 Royal Australasian College of Physicians.

Technical-economic feasibility of orbiting sunlight reflectors

NASA Astrophysics Data System (ADS)

Alferov, Z.; Minin, V.

1986-02-01

The use of deflectors in orbit as a means of providing artificial illumination is examined. Considerations of technical and economic feasibility are addressed. Three main areas of application are distinguished: reflecting sunlight onto the surface of the Earth; concentration of the flow of solar energy on an orbiting receiver; and retransmission of optical radiation. The advantages of the artificial Earth illumination application of the orbiting reflector scheme in terms of energy savings in lighting cities, and additional daylight time for critical periods of farming operations are discussed.

Ground testing and simulation. II - Aerodynamic testing and simulation: Saving lives, time, and money

NASA Technical Reports Server (NTRS)

Dayman, B., Jr.; Fiore, A. W.

1974-01-01

The present work discusses in general terms the various kinds of ground facilities, in particular, wind tunnels, which support aerodynamic testing. Since not all flight parameters can be simulated simultaneously, an important problem consists in matching parameters. It is pointed out that there is a lack of wind tunnels for a complete Reynolds-number simulation. Using a computer to simulate flow fields can result in considerable reduction of wind-tunnel hours required to develop a given flight vehicle.

Vapor port and groundwater sampling well

DOEpatents

Hubbell, Joel M.; Wylie, Allan H.

1996-01-01

A method and apparatus has been developed for combining groundwater monitoring wells with unsaturated-zone vapor sampling ports. The apparatus allows concurrent monitoring of both the unsaturated and the saturated zone from the same well at contaminated areas. The innovative well design allows for concurrent sampling of groundwater and volatile organic compounds (VOCs) in the vadose (unsaturated) zone from a single well, saving considerable time and money. The sample tubes are banded to the outer well casing during installation of the well casing.

Vapor port and groundwater sampling well

DOEpatents

Hubbell, J.M.; Wylie, A.H.

1996-01-09

A method and apparatus have been developed for combining groundwater monitoring wells with unsaturated-zone vapor sampling ports. The apparatus allows concurrent monitoring of both the unsaturated and the saturated zone from the same well at contaminated areas. The innovative well design allows for concurrent sampling of groundwater and volatile organic compounds (VOCs) in the vadose (unsaturated) zone from a single well, saving considerable time and money. The sample tubes are banded to the outer well casing during installation of the well casing. 10 figs.

Design of Orion Soil Impact Study using the Modern Design of Experiments

NASA Technical Reports Server (NTRS)

DeLoach, Richard

2010-01-01

Two conventional One Factor At a Time (OFAT) test matrices under consideration for an Orion Landing System subscale soil impact study are reviewed. Certain weaknesses in the designs, systemic to OFAT experiment designs generally, are identified. An alternative test matrix is proposed that is based in the Modern Design of Experiments (MDOE), which achieves certain synergies by combining the original two test matrices into one. The attendant resource savings are quantified and the impact on uncertainty is discussed.

Wastewater recycling and heat reclamation project: Red Lion Central Laundry, Portland, Oregon

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garlick, T.F.; Halverson, M.A.; Ledbetter, M.R.

1997-06-01

This report discusses water, energy, and cost savings that can be achieved in a commercial laundry through the use of a wastewater recycling and heat recovery system. Cost savings are achieved through reductions in water use, reduction in sewage charges (typically based on water use), reductions in water heating energy, and potential reductions in water treatment chemicals because the recycled water has already been treated with soaps and conditioners. A recovery system saves water by recycling wash water that would normally be dumped into the city sewage system. Recycling the wash water produces considerable energy savings because the recycled watermore » has a higher temperature than fresh water. As a result, a hot water heater consumes less energy to heat the recycled water. The demonstration project discussed in this report was based in a large commercial laundry in Portland, Oregon. The laundry serves a large hotel/motel chain and processes an average of 25,000 pounds of laundry per day. A wastewater recovery system using a membrane microfiltration unit (MFU) was installed in the laundry in September 1995. Time series data of the water and energy consumption of the laundry were taken before and after installation of the MFU. Energy savings were measured by performing a thermal energy balance around the washing machines. Water savings were calculated by metering volumetric flow rates. After a period of approximately five months, the MFU has achieved final results of 52 percent savings in water consumption and 44 percent savings in energy to heat water. This five-month period represents a learning curve during which several small technical improvements were made to the MFU and laundry staff adjusted laundry operations to maximize the benefits of the MFU. An economic analysis discusses the impact of capital investment, daily consumption, and local utility rates on the payback period.« less

On The Determination of Shadow Boundaries and Relevant Eigenrays For Sound Propagation In Stratified Moving Media

NASA Technical Reports Server (NTRS)

Mcaninch, Gerry L.; Heath, Stephanie L.

2006-01-01

The eiconal and ray equations for a stratified moving medium are analyzed to determine which rays connect a source located at an altitude z = z(sub s) to an observer on the ground plane. The characteristics of all available rays are ascertained. Further, the rays which determine the shadow boundary are found. Thus, the shadow boundary may be easily calculated and any observers for which an eigenray does not exist eliminated from further consideration. Therefore, the analysis may be applied to save computer time in two ways. First, rays that do not reach the ground may be eliminated before they are traced, and observers for which no eigenray exists may be eliminated from consideration.

[Atosiban treatment for preterm labor--financial considerations and savings by implementing clinical guidelines].

PubMed

Hadar, Eran; Mansur, Nariman; Ambar, Irit; Hod, Moshe

2011-06-01

Preterm delivery is a significant cause of neonatal morbidity and mortality. Pregnant women, with symptoms and signs consistent with preterm labor, can be treated with various tocolytic drugs. Atosiban is one of many drugs indicated to arrest imminent preterm labor. Various studies show that the efficacy of atosiban is similar to other tocolytic drugs. The main advantage of atosiban is a relativeLy low incidence of adverse maternal reactions. Its considerable shortcoming is the financial cost, compared to other available drugs. In view of its cost, we have decided to implement a strict protocol to direct the use of atosiban, with the intent to reduce costs, without hampering quality of care. The protocol was implemented from July 2009, and it outlines the medical and procedural terms to use atosiban. We compared similar time periods before and after implementation of the protocol. The outcomes compared included: treatment success, rates of preterm deliveries and financial costs. Within the timeframe that the protocol was implemented, we have been able to demonstrate a 40% reduction in atosiban related costs, compared to a parallel period, when the clinical guidelines were not implemented. This translates into savings of about NIS 40,000 (New Israeli Shekel) (approximately $10,000). This was achieved without an increase in the rate of preterm deliveries. Implementing and enforcing a simple protocol of supervision on the use of atosiban enables a considerable reduction of financial costs related to atosiban, without hampering medical care.

Running with horizontal pulling forces: the benefits of towing.

PubMed

Grabowski, Alena M; Kram, Rodger

2008-10-01

Towing, or running with a horizontal pulling force, is a common technique used by adventure racing teams. During an adventure race, the slowest person on a team determines the team's overall performance. To improve overall performance, a faster runner tows a slower runner with an elastic cord attached to their waists. Our purpose was to create and validate a model that predicts the optimal towing force needed by two runners to achieve their best overall performance. We modeled the effects of towing forces between two runners that differ in solo 10-km performance time and/or body mass. We calculated the overall time that could be saved with towing for running distances of 10, 20, and 42.2-km based on equations from previous research. Then, we empirically tested our 10-km model on 15 runners. Towing improved overall running performance considerably and our model accurately predicted this performance improvement. For example, if two runners (a 70 kg runner with a 35 min solo 10-km time and a 70-kg runner with a 50-min solo 10-km time) maintain an optimal towing force throughout a 10-km race, they can improve overall performance by 15%, saving almost 8 min. Ultimately, the race performance time and body mass of each runner determine the optimal towing force.

The influence of multiple goals on driving behavior: the case of safety, time saving, and fuel saving.

PubMed

Dogan, Ebru; Steg, Linda; Delhomme, Patricia

2011-09-01

Due to the innate complexity of the task drivers have to manage multiple goals while driving and the importance of certain goals may vary over time leading to priority being given to different goals depending on the circumstances. This study aimed to investigate drivers' behavioral regulation while managing multiple goals during driving. To do so participants drove on urban and rural roads in a driving simulator while trying to manage fuel saving and time saving goals, besides the safety goals that are always present during driving. A between-subjects design was used with one group of drivers managing two goals (safety and fuel saving) and another group managing three goals (safety, fuel saving, and time saving) while driving. Participants were provided continuous feedback on the fuel saving goal via a meter on the dashboard. The results indicate that even when a fuel saving or time saving goal is salient, safety goals are still given highest priority when interactions with other road users take place and when interacting with a traffic light. Additionally, performance on the fuel saving goal diminished for the group that had to manage fuel saving and time saving together. The theoretical implications for a goal hierarchy in driving tasks and practical implications for eco-driving are discussed. Copyright © 2011 Elsevier Ltd. All rights reserved.

Creating mold-free buildings: a key to avoiding health effects of indoor molds.

PubMed

Small, Bruce M

2003-08-01

In view of the high costs of building diagnostics and repair subsequent to water damage--as well as the large medical diagnostic and healthcare costs associated with mold growth in buildings--commitment to a philosophy of proactive preventive maintenance for home, apartment, school, and commercial buildings could result in considerable cost savings and avoidance of major health problems among building occupants. The author identifies common causes of mold growth in buildings and summarizes key building design and construction principles essential for preventing mold contamination indoors. Physicians and healthcare workers must be made aware of conditions within buildings that can give rise to mold growth, and of resulting health problems. Timely advice provided to patients already sensitized by exposure to molds could save these individuals, and their families, from further exposures as a result of inadequate building maintenance or an inappropriate choice of replacement housing.

Bats on a Budget: Torpor-Assisted Migration Saves Time and Energy

PubMed Central

McGuire, Liam P.; Jonasson, Kristin A.; Guglielmo, Christopher G.

2014-01-01

Bats and birds must balance time and energy budgets during migration. Migrating bats face similar physiological challenges to birds, but nocturnality creates special challenges for bats, such as a conflict between travelling and refueling, which many birds avoid by feeding in daylight and flying at night. As endothermic animals, bats and birds alike must expend substantial amounts of energy to maintain high body temperatures. For migratory birds refueling at stopovers, remaining euthermic during inactive periods reduces the net refuelling rate, thereby prolonging stopover duration and delaying subsequent movement. We hypothesized that bats could mitigate similar ambient-temperature dependent costs by using a torpor-assisted migration strategy. We studied silver-haired bats Lasionycteris noctivagans during autumn migration using a combination of respirometry and temperature-sensitive radiotelemetry to estimate energy costs incurred under ambient temperature conditions, and the energy that bats saved by using torpor during daytime roosting periods. All bats, regardless of sex, age, or body condition used torpor at stopover and saved up to 91% of the energy they would have expended to remain euthermic. Furthermore, bats modulated use of torpor depending on ambient temperature. By adjusting the time spent torpid, bats achieved a rate of energy expenditure independent of the ambient temperature encountered at stopover. By lowering body temperature during inactive periods, fuel stores are spared, reducing the need for refuelling. Optimal migration models consider trade-offs between time and energy. Heterothermy provides a physiological strategy that allows bats to conserve energy without paying a time penalty as they migrate. Although uncommon, some avian lineages are known to use heterothermy, and current theoretical models of migration may not be appropriate for these groups. We propose that thermoregulatory strategies should be an important consideration of future migration studies of both bats and birds. PMID:25551615

Occupancy Fire Record. Libraries.

ERIC Educational Resources Information Center

National Fire Protection Association, Boston, MA.

Considerations essential to adequate protection for library facilities have been assembled in the form of recommendations and related to specific examples. Five steps are given which outline the procedures to follow in order to achieve fire safety. With regard to planning, six considerations are dealt with in detail--(1) the saving of lives, (2)…

Impact of Extended Daylight Saving Time on National Energy Consumption Report to Congress

DOE Office of Scientific and Technical Information (OSTI.GOV)

Belzer, D. B.; Hadley, S. W.; Chin, S-M.

2008-10-01

The Energy Policy Act of 2005 (Pub. L. No. 109-58; EPAct 2005) amended the Uniform Time Act of 1966 (Pub. L. No. 89-387) to increase the portion of the year that is subject to Daylight Saving Time. (15 U.S.C. 260a note) EPAct 2005 extended the duration of Daylight Saving Time in the spring by changing its start date from the first Sunday in April to the second Sunday in March, and in the fall by changing its end date from the last Sunday in October to the first Sunday in November. (15 U.S.C. 260a note) EPAct 2005 also called formore » the Department of Energy to evaluate the impact of Extended Daylight Saving Time on energy consumption in the United States and to submit a report to Congress. (15 U.S.C. 260a note) This report presents the results of impacts of Extended Daylight Saving Time on the national energy consumption in the United States. The key findings are: (1) The total electricity savings of Extended Daylight Saving Time were about 1.3 Tera Watt-hour (TWh). This corresponds to 0.5 percent per each day of Extended Daylight Saving Time, or 0.03 percent of electricity consumption over the year. In reference, the total 2007 electricity consumption in the United States was 3,900 TWh. (2) In terms of national primary energy consumption, the electricity savings translate to a reduction of 17 Trillion Btu (TBtu) over the spring and fall Extended Daylight Saving Time periods, or roughly 0.02 percent of total U.S. energy consumption during 2007 of 101,000 TBtu. (3) During Extended Daylight Saving Time, electricity savings generally occurred over a three- to five-hour period in the evening with small increases in usage during the early-morning hours. On a daily percentage basis, electricity savings were slightly greater during the March (spring) extension of Extended Daylight Saving Time than the November (fall) extension. On a regional basis, some southern portions of the United States exhibited slightly smaller impacts of Extended Daylight Saving Time on energy savings compared to the northern regions, a result possibly due to a small, offsetting increase in household air conditioning usage. (4) Changes in national traffic volume and motor gasoline consumption for passenger vehicles in 2007 were determined to be statistically insignificant and therefore, could not be attributed to Extended Daylight Saving Time.« less

Performance Dependences of Multiplication Layer Thickness for InP/InGaAs Avalanche Photodiodes Based on Time Domain Modeling

NASA Technical Reports Server (NTRS)

Xiao, Yegao; Bhat, Ishwara; Abedin, M. Nurul

2005-01-01

InP/InGaAs avalanche photodiodes (APDs) are being widely utilized in optical receivers for modern long haul and high bit-rate optical fiber communication systems. The separate absorption, grading, charge, and multiplication (SAGCM) structure is an important design consideration for APDs with high performance characteristics. Time domain modeling techniques have been previously developed to provide better understanding and optimize design issues by saving time and cost for the APD research and development. In this work, performance dependences on multiplication layer thickness have been investigated by time domain modeling. These performance characteristics include breakdown field and breakdown voltage, multiplication gain, excess noise factor, frequency response and bandwidth etc. The simulations are performed versus various multiplication layer thicknesses with certain fixed values for the areal charge sheet density whereas the values for the other structure and material parameters are kept unchanged. The frequency response is obtained from the impulse response by fast Fourier transformation. The modeling results are presented and discussed, and design considerations, especially for high speed operation at 10 Gbit/s, are further analyzed.

Design and evaluation of Continuous Descent Approach as a fuel-saving procedure

NASA Astrophysics Data System (ADS)

Jin, Li

Continuous Descent Approach (CDA), which is among the key concepts of the Next Generation Air Transportation System (NextGen), is a fuel economical procedure, but requires increased separation to accommodate spacing uncertainties among arriving aircraft. Such negative impact is often overlooked when benefits are estimated. Although a considerable number of researches have been devoted to the estimation of potential fuel saving of CDA, few have attempted to explain the fuel saving observed in field tests from an analytical point of view. This research gives insights into the reasons why CDA saves fuel, and a number of design guidelines for CDA procedures are derived. The analytical relationship between speed, altitude, and time-cumulative fuel consumption is derived based on Base of Aircraft Data (BADA) Total Energy Model. Theoretical analysis implies that speed profile has an impact as substantial as, if not more than, vertical profile on the fuel consumption in the terminal area. In addition, CDA is not intrinsically a fuel-saving procedure: whether CDA saves fuel or not is contingent upon whether the speed profile is properly designed or not. Based on this model, the potential fuel savings due to CDA at San Francisco International Airport were estimated, and the accuracy of this estimation is analyzed. Possible uncertainties in this fuel estimation primarily resulted from the modeled CDA procedure and the inaccuracy of BADA. This thesis also investigates the fuel savings due to CDAs under high traffic conditions, counting not only the savings benefiting from optimal vertical profiles but also the extra fuel burn resulting from the increased separations. The simulated CDAs traffic is based on radar track data, and deconflicted by a scheduling algorithm that targets minimized delays. The delays are absorbed by speed change and path stretching, accounting for the air traffic controls that are entailed by CDAs. The fuel burn statistics calculated based on the BADA Total Energy Model reveals that the CDAs save on average 171.87 kg per arrival, but the number is discounted by delay absorption. The savings diminish as the arrival demand increases, and could be even negative due to large delays. The throughput analysis demonstrated that the impact of CDA on airport capacity is insignificant and tolerable. The Atlanta International Airport was used as the testbed for sensitivity analysis, and the New York Metroplex was used as the test bed for throughput analysis.

The Impact of Rate Design and Net Metering on the Bill Savings from Distributed PV for Residential Customers in California

DOE Office of Scientific and Technical Information (OSTI.GOV)

Darghouth, Naim; Barbose, Galen; Wiser, Ryan

2010-03-30

Net metering has become a widespread policy in the U.S. for supporting distributed photovoltaics (PV) adoption. Though specific design details vary, net metering allows customers with PV to reduce their electric bills by offsetting their consumption with PV generation, independent of the timing of the generation relative to consumption - in effect, compensating the PV generation at retail electricity rates (Rose et al. 2009). While net metering has played an important role in jump-starting the residential PV market in the U.S., challenges to net metering policies have emerged in a number of states and contexts, and alternative compensation methods aremore » under consideration. Moreover, one inherent feature of net metering is that the value of the utility bill savings it provides to customers with PV depends heavily on the structure of the underlying retail electricity rate, as well as on the characteristics of the customer and PV system. Consequently, the value of net metering - and the impact of moving to alternative compensation mechanisms - can vary substantially from one customer to the next. For these reasons, it is important for policymakers and others that seek to support the development of distributed PV to understand both how the bill savings varies under net metering, and how the bill savings under net metering compares to other possible compensation mechanisms. To advance this understanding, we analyze the bill savings from PV for residential customers of California's two largest electric utilities, Pacific Gas and Electric (PG&E) and Southern California Edison (SCE). The analysis is based on hourly load data from a sample of 215 residential customers located in the service territories of the two utilities, matched with simulated hourly PV production for the same time period based on data from the nearest of 73 weather stations in the state.« less

The costs and benefits of reducing racial-ethnic disparities in mental health care.

PubMed

Cook, Benjamin Lê; Liu, Zimin; Lessios, Anna Sophia; Loder, Stephen; McGuire, Thomas

2015-04-01

Previous studies have found that timely mental health treatment can result in savings in both mental health and general medical care expenditures. This study examined whether reducing racial-ethnic disparities in mental health care offsets costs of care. Data were from a subsample of 6,206 individuals with probable mental illness from the 2004-2010 Medical Expenditure Panel Survey (MEPS). First, disparities in mental health treatment were analyzed. Second, two-year panel data were used to determine the offset of year 1 mental health outpatient and pharmacy treatment on year 2 mental and general medical expenditures. Third, savings were estimated by combining results from steps 1 and 2. Compared with whites, blacks and Latinos with year 1 outpatient mental health care spent less on inpatient and emergency general medical care in year 2. Latinos receiving mental health care in year 1 spent less than others on inpatient general medical care in year 2. Latinos taking psychotropic drugs in year 1 showed reductions in inpatient general medical care. Reducing racial-ethnic disparities in mental health care and in psychotropic drug use led to savings in acute medical care expenditures. Savings in acute care expenditures resulting from eliminating disparities in racial-ethnic mental health care access were greater than costs in some but not all areas of acute mental health and general medical care. For blacks and Latinos, the potential savings from eliminating disparities in inpatient general medical expenditures are substantial (as much as $1 billion nationwide), suggesting that financial and equity considerations can be aligned when planning disparity reduction programs.

Potential savings in prescription drug costs for hypertension, hyperlipidemia, and diabetes mellitus by equivalent drug substitution in Austria: a nationwide cohort study.

PubMed

Heinze, Georg; Hronsky, Milan; Reichardt, Berthold; Baumgärtel, Christoph; Müllner, Marcus; Bucsics, Anna; Winkelmayer, Wolfgang C

2015-04-01

Healthcare systems spend considerable proportions of their budgets on pharmaceutical treatment of hypertension, hyperlipidemia, and diabetes mellitus. From data on almost all residents of Austria, a country with mandatory health insurance and universal health coverage, we estimated potential cost savings by substituting prescribed medicines with the cheapest medicines that were of the same chemical substance and strength, and available during the same time. Data from 8.3 million persons (98.5 % of the total Austrian insured population) from 2009-2012 were analyzed. Real prescription costs for antihypertensive, lipid-lowering, and hypoglycemic medicines achievable by same-substance, same-strength drug substitution were computed for each active ingredient, and per gender and 1-year age category of patients. In 2012, health insurance providers spent 231.3 million, 77.8 million, and 91.9 million for antihypertensive, lipid-lowering, and diabetes medications, of which 52.2 million (22.6 %), 15.9 million (20.5 %), and 4.1 million (4.5 %), respectively, could have been saved by same-substance drug substitution. Highest potential savings were calculated for amlodipine (8.0 million, 65.4 %), simvastatin (12.2 million, 59.3 %), and metformin (2.4 million, 54.6 %), respectively. Higher savings for men than for women resulted from differing prescribed cumulative dosages and proportions of patients with co-payment waiver. Potential cost savings in antihypertensive and lipid-lowering drugs increased from 2009-2012. Our study highlights the cost-savings potential from arguably the most acceptable of interventions, simply switching to the cheapest available same-substance, same-strength product. In 2012, this strategy could have reduced costs for antihypertensive, lipid-lowering, and hypoglycemic treatment by up to 18.0 %.

Stapled hemorrhoidopexy, an innovative surgical procedure for hemorrhoidal prolapse: cost-utility analysis.

PubMed

Ribarić, Goran; Kofler, Justus; Jayne, David G

2011-08-15

To undertake full economic evaluation of stapled hemorrhoidopexy (PPH) to establish its cost-effectiveness and investigate whether PPH can become cost-saving compared to conventional excisional hemorrhoidectomy (CH). A cost-utility analysis in hospital and health care system (UK) was undertaken using a probabilistic, cohort-based decision tree to compare the use of PPH with CH. Sensitivity analyses allowed showing outcomes in regard to the variations in clinical practice of PPH procedure. The participants were patients undergoing initial surgical treatment of third and fourth degree hemorrhoids within a 1-year time-horizon. Data on clinical effectiveness were obtained from a systematic review of the literature. Main outcome measures were the cost per procedure at the hospital level, total direct costs from the health care system perspective, quality adjusted life years (QALY) gained and incremental cost per QALY gained. A decrease in operating theater time and hospital stay associated with PPH led to a cost saving compared to CH of GBP 27 (US $43.11, €30.50) per procedure at the hospital level and to an incremental cost of GBP 33 (US $52.68, €37.29) after one year from the societal perspective. Calculation of QALYs induced an incremental QALY of 0.0076 and showed an incremental cost-effective ratio (ICER) of GBP 4316 (US $6890.47, €4878.37). Taking into consideration recent literature on clinical outcomes, PPH becomes cost saving compared to CH for the health care system. PPH is a cost-effective procedure with an ICER of GBP 4136 and it seems that an innovative surgical procedure could be cost saving in routine clinical practice.

Energy-efficient approach to minimizing the energy consumption in an extended job-shop scheduling problem

NASA Astrophysics Data System (ADS)

Tang, Dunbing; Dai, Min

2015-09-01

The traditional production planning and scheduling problems consider performance indicators like time, cost and quality as optimization objectives in manufacturing processes. However, environmentally-friendly factors like energy consumption of production have not been completely taken into consideration. Against this background, this paper addresses an approach to modify a given schedule generated by a production planning and scheduling system in a job shop floor, where machine tools can work at different cutting speeds. It can adjust the cutting speeds of the operations while keeping the original assignment and processing sequence of operations of each job fixed in order to obtain energy savings. First, the proposed approach, based on a mixed integer programming mathematical model, changes the total idle time of the given schedule to minimize energy consumption in the job shop floor while accepting the optimal solution of the scheduling objective, makespan. Then, a genetic-simulated annealing algorithm is used to explore the optimal solution due to the fact that the problem is strongly NP-hard. Finally, the effectiveness of the approach is performed smalland large-size instances, respectively. The experimental results show that the approach can save 5%-10% of the average energy consumption while accepting the optimal solution of the makespan in small-size instances. In addition, the average maximum energy saving ratio can reach to 13%. And it can save approximately 1%-4% of the average energy consumption and approximately 2.4% of the average maximum energy while accepting the near-optimal solution of the makespan in large-size instances. The proposed research provides an interesting point to explore an energy-aware schedule optimization for a traditional production planning and scheduling problem.

On numerical solution of the Schrödinger equation: the shooting method revisited

NASA Astrophysics Data System (ADS)

Indjin, D.; Todorović, G.; Milanović, V.; Ikonić, Z.

1995-09-01

An alternative formulation of the "shooting" method for a numerical solution of the Schrödinger equation is described for cases of general asymmetric one-dimensional potential (planar geometry), and spherically symmetric potential. The method relies on matching the asymptotic wavefunctions and the potential core region wavefunctions, in course of finding bound states energies. It is demonstrated in the examples of Morse and Kratzer potentials, where a high accuracy of the calculated eigenvalues is found, together with a considerable saving of the computation time.

Wang-Landau sampling: Saving CPU time

NASA Astrophysics Data System (ADS)

Ferreira, L. S.; Jorge, L. N.; Leão, S. A.; Caparica, A. A.

2018-04-01

In this work we propose an improvement to the Wang-Landau (WL) method that allows an economy in CPU time of about 60% leading to the same results with the same accuracy. We used the 2D Ising model to show that one can initiate all WL simulations using the outputs of an advanced WL level from a previous simulation. We showed that up to the seventh WL level (f6) the simulations are not biased yet and can proceed to any value that the simulation from the very beginning would reach. As a result the initial WL levels can be simulated just once. It was also observed that the saving in CPU time is larger for larger lattice sizes, exactly where the computational cost is considerable. We carried out high-resolution simulations beginning initially from the first WL level (f0) and another beginning from the eighth WL level (f7) using all the data at the end of the previous level and showed that the results for the critical temperature Tc and the critical static exponents β and γ coincide within the error bars. Finally we applied the same procedure to the 1/2-spin Baxter-Wu model and the economy in CPU time was of about 64%.

Wireless Occupancy Sensors for Lighting Controls: An Applications Guide for Federal Facility Managers

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

This guide provides federal facility managers with an overview of the energy savings potential of wireless lighting occupancy sensors for various room types, cost considerations, key steps to successful installation of wireless sensors, pros and cons of various technology options, light source considerations, and codes and standards.

Industrial waste exchange: a mechanism for saving energy and money

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gaines, L.L.

1983-01-01

Although considerable savings of both energy and money are possible through waste exchange, several major impediments limit the number of actual exchanges that take place. These impediments include the lack of economical separation technology, the small quantities of material available at each site, restrictive or uncertain regulation, and lack of knowledge on the part of potential waste users. None of these barriers is insurmountable if appropriate action is taken.

Historical declines and disparities in cigarette coupon saving among adolescents in the United States, 1997-2013.

PubMed

Owotomo, Olusegun; Maslowsky, Julie; Pasch, Keryn E

2017-07-01

Exposure to cigarette coupons is associated with smoking initiation and likelihood of cigarette purchase among adolescents. Some adolescents who are exposed to cigarette coupons take a step further by choosing to save or collect these coupons, a further risk factor for cigarette smoking. This study examines historical trends and disparities in cigarette coupon saving among adolescents in the United States from 1997 to 2013. National samples of 10th and 12th grade students (n=129,111) were obtained from Monitoring the Future surveys in 1997-2013. Prevalence of lifetime and current cigarette coupon saving was estimated in each year in the overall adolescent population, and in race/ethnicity, parent education level, sex, and urban/rural subgroups. Prevalence of lifetime and current cigarette coupon saving was then estimated in each year based on smoking status. Prevalence of cigarette coupon saving has decreased dramatically among adolescents; only 1.2% reported currently saving coupons in 2013. However, disparities in cigarette coupon saving remain with prevalence higher among rural, White, and low parental education level students. Adolescent smokers continue to save coupons at high rates; 21.2% had ever saved coupons and 6.9% currently saved coupons as of 2013. Despite overall declines in adolescent cigarette coupon saving, existing sociodemographic disparities and the considerably high prevalence of coupon saving among adolescent smokers suggest that cigarette coupons remain a threat to smoking prevention among youth. Additional research is needed to further elucidate longitudinal associations between cigarette coupon saving and smoking initiation and maintenance among adolescents. Copyright © 2017 Elsevier Inc. All rights reserved.

Drones may be used to save lives in out of hospital cardiac arrest due to drowning.

PubMed

Claesson, A; Svensson, L; Nordberg, P; Ringh, M; Rosenqvist, M; Djarv, T; Samuelsson, J; Hernborg, O; Dahlbom, P; Jansson, A; Hollenberg, J

2017-05-01

Drowning leading to out-of-hospital cardiac arrest (OHCA) and death is a major public health concern. Submersion with duration of less than 10min is associated with favorable neurological outcome and nearby bystanders play a considerable role in rescue and resuscitation. Drones can provide a visual overview of an accident scene, their potential as lifesaving tools in drowning has not been evaluated. The aim of this simulation study was to evaluate the efficiency of a drone for providing earlier location of a submerged possible drowning victim in comparison with standard procedure. This randomized simulation study used a submerged manikin placed in a shallow (<2m) 100×100-m area at Tylösand beach, Sweden. A search party of 14 surf-lifeguards (control) was compared to a drone transmitting video to a tablet (intervention). Time from start to contact with the manikin was the primary endpoint. Twenty searches were performed in total, 10 for each group. The median time from start to contact with the manikin was 4:34min (IQR 2:56-7:48) for the search party (control) and 0:47min (IQR 0:38-0:58) for the drone-system (intervention) respectively (p<0.001). The median time saved by using the drone was 3:38min (IQR 2:02-6:38). A drone transmitting live video to a tablet is feasible, time saving in comparison to traditional search parties and may be used for providing earlier location of submerged victims at a beach. Drone search can possibly contribute to earlier onset of CPR in drowning victims. Copyright © 2017 Elsevier B.V. All rights reserved.

Interactive internet-based clinical education: an efficient and cost-savings approach to point-of-care test training.

PubMed

Knapp, Herschel; Chan, Kee; Anaya, Henry D; Goetz, Matthew B

2011-06-01

We successfully created and implemented an effective HIV rapid testing training and certification curriculum using traditional in-person training at multiple sites within the U.S. Department of Veterans Affairs (VA) Healthcare System. Considering the multitude of geographically remote facilities in the nationwide VA system, coupled with the expansion of HIV diagnostics, we developed an alternate training method that is affordable, efficient, and effective. Using materials initially developed for in-person HIV rapid test in-services, we used a distance learning model to offer this training via live audiovisual online technology to educate clinicians at a remote outpatient primary care VA facility. Participants' evaluation metrics showed that this form of remote education is equivalent to in-person training; additionally, HIV testing rates increased considerably in the months following this intervention. Although there is a one-time setup cost associated with this remote training protocol, there is potential cost savings associated with the point-of-care nurse manager's time productivity by using the Internet in-service learning module for teaching HIV rapid testing. If additional in-service training modules are developed into Internet-based format, there is the potential for additional cost savings. Our cost analysis demonstrates that the remote in-service method provides a more affordable and efficient alternative compared with in-person training. The online in-service provided training that was equivalent to in-person sessions based on first-hand supervisor observation, participant satisfaction surveys, and follow-up results. This method saves time and money, requires fewer personnel, and affords access to expert trainers regardless of geographic location. Further, it is generalizable to training beyond HIV rapid testing. Based on these consistent implementation successes, we plan to expand use of online training to include remote VA satellite facilities spanning several states for a variety of diagnostic devices. Ultimately, Internet-based training has the potential to provide "big city" quality of care to patients at remote (rural) clinics.

Riding the Electricity Market as an Energy Management Strategy: Savings from Real-Time Pricing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chiles, Thomas; Shutika, Kenneth; Coleman, Philip

Dynamic pricing of electricity, in which retail prices facing customers are responsive to changes in the underlying wholesale markets, represents a step towards economic efficiency in that customers get exposed to some or all of the costs facing wholesale market players. But what do customers who opt for this greater exposure – available in the roughly 15 “de-regulated” states, as well as, to some extent, from some regulated utilities – get in return for their risks? The U.S. General Services Administration (GSA) took a retrospective eight-year look at what the savings would have been had they let the loads formore » which they purchase electricity in the Washington, DC area buy electricity on the real-time pricing (RTP) market – the dynamic pricing option with the highest risk – as opposed to the strategy they chose in actuality, which was fixing flat prices with 3rd-party providers. We found that opting for RTP for the eight years of the study (2005 through 2012) would have resulted in 17% savings, or almost a quarter of a billion dollars, relative to GSA’s actual prices from the 3rd-party suppliers. This is particularly astonishing given that GSA appeared to have timed the market well during the study period, consistently beating the standard offer products provided by the distribution utilities. The issue of budgetary predictability poses an obstacle for customers (especially government ones) considering RTP and, to a lesser extent, other dynamic pricing options. Indeed, GSA would have lost money with RTP in two of the eight years, one of them substantially. But the magnitude of the savings is indisputably compelling and, even if it may be somewhat aberrational due to high congestion in the DC market, begs consideration by large electricity users currently paying to “lock in” fixed flat prices.« less

Innovative project management on the basis of programme-and-target approach for energy saving in the construction complex

NASA Astrophysics Data System (ADS)

Mottaeva, Angela

2017-10-01

Article is devoted to the consideration of the existing approaches to energy saving. According to the author’s opinion,the system approach is not enough for the achievement of the goal of the increase in energy efficiency and economy of energy, which is quite relevant for the world scientific community today, when the mankind has reached the certain power and ecological threshold. The author reasons the need of programme-and-target approach to energy saving and the increase in energy efficiency of buildings. The problems of the energy saving in current conditions are revealed. The provisional algorithm of the programme-and-target approach to energy efficiency. The expected results from introduction of the programme-and-target approach are presented in the article.

Considerations in change management related to technology.

PubMed

Luo, John S; Hilty, Donald M; Worley, Linda L; Yager, Joel

2006-01-01

The authors describe the complexity of social processes for implementing technological change. Once a new technology is available, information about its availability and benefits must be made available to the community of users, with opportunities to try the innovations and find them worthwhile, despite organizational resistances. The authors reviewed the literature from psychiatry, psychology, sociology, business, and technology to distill common denominators for success and failure related to implementing technology. Beneficial technological innovations that are simple to use and obviously save everyone time and effort are easy to inaugurate. However, innovations that primarily serve management rather than subordinates or front-line utilizers may fail, despite considerable institutional effort. This article reviews and outlines several of the more prominent theoretical models governing successful institutional change. Successful implementation of difficult technological changes requires visionary leadership that has carefully considered the benefits, consulted with influence leaders at all organizational levels to spot unintended consequences and sources of resistance, and developed a detailed plan and continuous quality assurance process to foster implementation over time.

Solar energy system performance evaluation. Seasonal report for Wormser, Columbia, South Carolina

NASA Technical Reports Server (NTRS)

1980-01-01

The Wormser Solar Energy System's operational performance from April 1979 through March 1980 was evaluated. The space heating subsystem met 42 percent of the measured space heating load and the hot water subsystem met 23 percent of the measured hot water demand. Net electrical energy savings were 4.36 million Btu's or 1277 kwh. Fossil energy savings will increase considerably if the uncontrolled solar energy input to the building is considered.

Information transfer in verbal presentations at scientific meetings

NASA Astrophysics Data System (ADS)

Flinn, Edward A.

The purpose of this note is to suggest a quantitative approach to deciding how much time to give a speaker at a scientific meeting. The elementary procedure is to use the preacher's rule of thumb that no souls are saved after the first 20 minutes. This is in qualitative agreement with the proverb that one cannot listen to a single voice for more than an hour without going to sleep. A refinement of this crude approach can be made by considering the situation from the point of view of a linear physical system with an input, a transfer function, and an output. We attempt here to derive an optimum speaking time through these considerations.

The Design Manager's Aid for Intelligent Decomposition (DeMAID)

NASA Technical Reports Server (NTRS)

Rogers, James L.

1994-01-01

Before the design of new complex systems such as large space platforms can begin, the possible interactions among subsystems and their parts must be determined. Once this is completed, the proposed system can be decomposed to identify its hierarchical structure. The design manager's aid for intelligent decomposition (DeMAID) is a knowledge based system for ordering the sequence of modules and identifying a possible multilevel structure for design. Although DeMAID requires an investment of time to generate and refine the list of modules for input, it could save considerable money and time in the total design process, particularly in new design problems where the ordering of the modules has not been defined.

Cloud Computing: A model Construct of Real-Time Monitoring for Big Dataset Analytics Using Apache Spark

NASA Astrophysics Data System (ADS)

Alkasem, Ameen; Liu, Hongwei; Zuo, Decheng; Algarash, Basheer

2018-01-01

The volume of data being collected, analyzed, and stored has exploded in recent years, in particular in relation to the activity on the cloud computing. While large-scale data processing, analysis, storage, and platform model such as cloud computing were previously and currently are increasingly. Today, the major challenge is it address how to monitor and control these massive amounts of data and perform analysis in real-time at scale. The traditional methods and model systems are unable to cope with these quantities of data in real-time. Here we present a new methodology for constructing a model for optimizing the performance of real-time monitoring of big datasets, which includes a machine learning algorithms and Apache Spark Streaming to accomplish fine-grained fault diagnosis and repair of big dataset. As a case study, we use the failure of Virtual Machines (VMs) to start-up. The methodology proposition ensures that the most sensible action is carried out during the procedure of fine-grained monitoring and generates the highest efficacy and cost-saving fault repair through three construction control steps: (I) data collection; (II) analysis engine and (III) decision engine. We found that running this novel methodology can save a considerate amount of time compared to the Hadoop model, without sacrificing the classification accuracy or optimization of performance. The accuracy of the proposed method (92.13%) is an improvement on traditional approaches.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zodtner, H. H.

There is an interest in discovering the various peace time uses of nuclear explosives. One of the proposals is the building of harbors. There are several ports along the west coast of South America where lighterage is necessary. This implies a need for expanded harbor facilities. The problem is to find a good location for creating a harbor, and the feasibility of accomplishing this with the use of nuclear force. Feasibility includes blast effects, radiation hazards, the number of weapons needed, and economic considerations. Economic considerations include the cost of treating a harbor of sufficient depth and area, the buildingmore » of harbor facilities, and the estimated savings and advantages of the new harbor. Several meetings were held with naval personnel of the Military Liaison group at UCRL to discuss the general problems of harbors. Thirty-three different ports were given a preliminary investigation.« less

Print quality analysis for ink-saving algorithms

NASA Astrophysics Data System (ADS)

Ortiz Segovia, Maria V.; Bonnier, Nicolas; Allebach, Jan P.

2012-01-01

Ink-saving strategies for CMYK printers have evolved from their earlier stages where the 'draft' print mode was the main option available to control ink usage. The savings were achieved by printing alternate dots in an image at the expense of reducing print quality considerably. Nowadays, customers are not only unwilling to compromise quality but have higher expectations regarding both visual print quality and ink reduction solutions. Therefore, the need for more intricate ink-saving solutions with lower impact on print quality is evident. Printing-related factors such as the way the printer places the dots on the paper and the ink-substrate interaction play important and complex roles in the characterization and modeling of the printing process that make the ink reduction topic a challenging problem. In our study, we are interested in benchmarking ink-saving algorithms to find the connections between different ink reduction levels of a given ink-saving method and a set of print quality attributes. This study is mostly related to CMYK printers that use dispersed dot halftoning algorithms. The results of our efforts to develop such an evaluation scheme are presented in this paper.

Valuation of travel time savings in viewpoint of WTA.

PubMed

Shao, Chang-Qiao; Liu, Yang; Liu, Xiao-Ming

2014-01-01

In order to investigate the issues in measurement of value of travel time savings (VTTS), the willingness-to-accept (WTA) for the private car owner is studied by using surveyed data. It is convincing that trip purpose, trip length, time savings, cost savings, income, and allowance from employee have effects on the WTA. Moreover, influences of these variables are not the same for different trip purposes. For commuting trips, effects of income and allowance from employee are significant while time savings and cost savings are dominated for leisure and shopping trips. It is also found that WTA is much higher than expected which implies that there are a group of drivers who are not prone to switching to other trip modes other than passenger car.

17 CFR 232.13 - Date of filing; adjustment of filing date.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Standard Time or Eastern Daylight Saving Time, whichever is currently in effect, shall be deemed filed on.... Eastern Standard Time or Eastern Daylight Saving Time, whichever is currently in effect, shall be deemed... Daylight Savings Time, whichever is currently in effect, shall be deemed filed on the same business day. (4...

17 CFR 232.13 - Date of filing; adjustment of filing date.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Standard Time or Eastern Daylight Saving Time, whichever is currently in effect, shall be deemed filed on.... Eastern Standard Time or Eastern Daylight Saving Time, whichever is currently in effect, shall be deemed... Daylight Savings Time, whichever is currently in effect, shall be deemed filed on the same business day. (4...

17 CFR 232.13 - Date of filing; adjustment of filing date.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Standard Time or Eastern Daylight Saving Time, whichever is currently in effect, shall be deemed filed on.... Eastern Standard Time or Eastern Daylight Saving Time, whichever is currently in effect, shall be deemed... Daylight Savings Time, whichever is currently in effect, shall be deemed filed on the same business day. (4...

17 CFR 232.13 - Date of filing; adjustment of filing date.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Standard Time or Eastern Daylight Saving Time, whichever is currently in effect, shall be deemed filed on.... Eastern Standard Time or Eastern Daylight Saving Time, whichever is currently in effect, shall be deemed... Daylight Savings Time, whichever is currently in effect, shall be deemed filed on the same business day. (4...

Future Warfare: Anthology Revised Edition

DTIC Science & Technology

2001-06-01

film “ Saving Private Ryan ” are compelling and chilling. But the information age promises to make ground combat considerably less destructive that the...116 Saving Private Ryan , 80–81 Schwarzkopf, Norman, 242, 243–244 Science and technology, 191–202 Scipio, 44 Security beyond the year 2010, 128–131, 137... Private Ryan ” where the true horror of face-to-face ground combat is driven into the psyche of the movie goer. I am increasingly convinced, however

Comparison of joint space versus task force load distribution optimization for a multiarm manipulator system

NASA Technical Reports Server (NTRS)

Soloway, Donald I.; Alberts, Thomas E.

1989-01-01

It is often proposed that the redundancy in choosing a force distribution for multiple arms grasping a single object should be handled by minimizing a quadratic performance index. The performance index may be formulated in terms of joint torques or in terms of the Cartesian space force/torque applied to the body by the grippers. The former seeks to minimize power consumption while the latter minimizes body stresses. Because the cost functions are related to each other by a joint angle dependent transformation on the weight matrix, it might be argued that either method tends to reduce power consumption, but clearly the joint space minimization is optimal. A comparison of these two options is presented with consideration given to computational cost and power consumption. Simulation results using a two arm robot system are presented to show the savings realized by employing the joint space optimization. These savings are offset by additional complexity, computation time and in some cases processor power consumption.

Additional reductions in Medicare spending growth will likely require shifting costs to beneficiaries.

PubMed

Chernew, Michael E

2013-05-01

Policy makers have considerable interest in reducing Medicare spending growth. Clarity in the debate on reducing Medicare spending growth requires recognition of three important distinctions: the difference between public and total spending on health, the difference between the level of health spending and rate of health spending growth, and the difference between growth per beneficiary and growth in the number of beneficiaries in Medicare. The primary policy issue facing the US health care system is the rate of spending growth in public programs, and solving that problem will probably require reforms to the entire health care sector. The Affordable Care Act created a projected trajectory for Medicare spending per beneficiary that is lower than historical growth rates. Although opportunities for one-time savings exist, any long-term savings from Medicare, beyond those already forecast, will probably require a shift in spending from taxpayers to beneficiaries via higher beneficiary premium contributions (overall or via means testing), changes in eligibility, or greater cost sharing at the point of service.

Launching a medicare advantage plan: smart planning saves headaches.

PubMed

Abrams, Robert J; Mullaney, Teri L

2007-11-01

If you're considering setting up a Medicare Advantage plan, the following are important considerations: Financial analysis. Payment rates. Medical costs. Marketing and operational costs. Technology infrastructure. Staffing.

The impact of early discharge laws on the health of newborns.

PubMed

Evans, William N; Garthwaite, Craig; Wei, Heng

2008-07-01

Using an interrupted time series design and a census of births in California over a 6-year period, we show that state and federal laws passed in the late 1990s designed to increase the length of postpartum hospital stays reduced considerably the fraction of newborns that were discharged early. The law had little impact on re-admission rates for privately insured, vaginally delivered newborns, but reduced re-admission rates for privately insured c-section-delivered and Medicaid-insured vaginally delivered newborns by statistically significant amounts. Our calculations suggest the program was not cost saving.

When all else fails: 21st century Amateur Radio as an emergency communications medium.

PubMed

Nollet, Kenneth E; Ohto, Hitoshi

2013-12-01

Twenty-first century demand for radio spectrum continues to increase with the explosive growth of wireless devices, but authorities reserve slices of the spectrum for licensed Amateur Radio operators, recognizing their value to the public, particularly with respect to providing emergency communications. Blood banking and transfusion medicine are among the specialties that should also recognize the value of Amateur Radio as an emergency communications medium, because blood collection, testing, processing, storage, and transfusion are life-saving activities that in modern times can be separated by considerable distance. Copyright © 2013 Elsevier Ltd. All rights reserved.

Survey of multi-function display and control technology

NASA Technical Reports Server (NTRS)

Spiger, R. J.; Farrell, R. J.; Tonkin, M. H.

1982-01-01

The NASA orbiter spacecraft incorporates a complex array of systems, displays and controls. The incorporation of discrete dedicated controls into a multi-function display and control system (MFDCS) offers the potential for savings in weight, power, panel space and crew training time. The technology applicable to the development of a MFDCS for orbiter application is surveyed. Technology thought to be applicable presently or in the next five years is highlighted. Areas discussed include display media, data handling and processing, controls and operator interactions and the human factors considerations which are involved in a MFDCS design. Several examples of applicable MFDCS technology are described.

Preparing a poster.

PubMed

White, Adrian; White, Leon

2003-06-01

Well prepared posters are an effective means to communicate a simple message and stimulate discussion. A good poster requires considerable effort in identifying the vital ingredients and rejecting any superfluous material. The conventional structure for papers and abstracts is a suitable basis for posters on many subjects, with modification if necessary. Suitable topics include clinical trials, surveys, qualitative studies and case reports. Suggestions are made for contents that should be considered for each section. Careful planning of size, shape, flow and content will save time in preparation, and several technical graphical points are made, which may improve the attractiveness and readability of the poster.

Prehospital administration of tenecteplase for ST-segment elevation myocardial infarction in a rural EMS system.

PubMed

Crowder, Joseph S; Hubble, Michael W; Gandhi, Sanjay; McGinnis, Henderson; Zelman, Stacie; Bozeman, William; Winslow, James

2011-01-01

In the setting of ST-segment elevation myocardial infarction (STEMI), early reperfusion yields better patient outcomes. Emergency medical services (EMS) is the first medical contact for half of the afflicted population, and prehospital thrombolysis may result in considerably faster reperfusion compared with percutaneous coronary intervention (PCI) in rural settings. However, there are few reports of prehospital thrombolysis in rural EMS systems. To describe a rural EMS system's experience with tenecteplase in STEMI. Data were retrospectively abstracted from the medical records of patients receiving tenecteplase using standard chart review guidelines. Primary outcomes included time saved by EMS-initiated thrombolysis, aborted infarctions, serious bleeding events, and in-hospital mortality. Secondary outcomes included reinfarction, rescue angioplasty, and appropriateness of treatment. Time savings was defined as transport time after tenecteplase administration plus 90 minutes, which is the typical door-to-balloon time for PCI laboratories. Aborted infarction was defined as resolution of the cumulative ST-segment elevation to ≤ 50% of that on the initial electrocardiogram (ECG) within two hours after treatment, and peak creatine kinase (CK)/CK-MB levels less than or equal to twice the upper limit of normal. Seventy-three patients received prehospital tenecteplase; this treatment was determined to be appropriate in 86.4% of cases. The mean patient age was 59 years, and 71.6% of the patients were male. Mean (± standard deviation) scene-arrival-to-drug time was 26.2 (± 11.4) minutes, the mean scene-arrival-to-hospital-arrival time was 73.0 (± 20.6) minutes, and the mean transport time was 46.0 (± 11.1) minutes. Tenecteplase was administered 35.9 (± 25.0) minutes prior to hospital arrival, and the estimated reperfusion time savings over PCI was 125.9 (± 25.0) minutes. Aborted infarctions were observed in 24.1% of patients, whereas 9.6% suffered reinfarction, 47.9% underwent rescue angioplasty, and 16.7% required coronary artery bypass grafting (CABG). Serious bleeding events occurred in 15 patients (20.5%), and four (5.5%) died. In this retrospective review of rural STEMI patients, tenecteplase was administered 36 minutes prior to hospital arrival, saving approximately two hours over typical PCI strategies and resulting in aborted infarctions in one-fourth of patients. In a rural setting with lengthy transport times to PCI facilities, tenecteplase appears to be a feasible prehospital intervention. Randomized controlled trials are needed to fully evaluate the safety and effectiveness of this intervention prior to widespread adoption.

Year-Round Daylight Saving Time Study : Volume 1. Interim Report on the Operation and Effects of Daylight Saving Time

DOT National Transportation Integrated Search

1975-06-01

The analyses of the effects of Year-Round Daylight Saving Time were not conslusive because they could not be reliablyseparated from other changes occuring simultaneously including fuel availability constraints, speed limit reductions, Sunday gasoline...

Future Propulsion Opportunities for Commuter Airplanes

NASA Technical Reports Server (NTRS)

Strack, W. C.

1982-01-01

Commuter airplane propulsion opportunities are summarized. Consideration is given to advanced technology conventional turboprop engines, advanced propellers, and several unconventional alternatives: regenerative turboprops, rotaries, and diesels. Advanced versions of conventional turboprops (including propellers) offer 15-20 percent savings in fuel and 10-15 percent in DOC compared to the new crop of 1500-2000 SHP engines currently in development. Unconventional engines could boost the fuel savings to 30-40 percent. The conclusion is that several important opportunities exist and, therefore, powerplant technology need not plateau.

Titanium fasteners. [for aircraft industry

NASA Technical Reports Server (NTRS)

Phillips, J. L.

1972-01-01

Titanium fasteners are used in large quantities throughout the aircraft industry. Most of this usage is in aluminum structure; where titanium structure exists, titanium fasteners are logically used as well. Titanium fasteners offer potential weight savings to the designer at a cost of approximately $30 per pound of weight saved. Proper and least cost usage must take into consideration type of fastener per application, galvanic couples and installation characteristics of protective coatings, cosmetic appearance, paint adhesion, installation forces and methods available and fatigue performance required.

The Impact of an Electronic Expensive Test Notification.

PubMed

Riley, Jacquelyn D; Stanley, Glenn; Wyllie, Robert; Kottke-Marchant, Kandice; Procop, Gary W

2018-04-25

The impact of clinical decision support tools (CDSTs) that display test cost information has been variable. We retrospectively analyzed the 3-year impact of a passive CDST that notified providers when the test order cost was $1,000 or more. We determined the most common expensive tests ordered, the frequency with which providers abandoned the order after notification, and the costs saved through this intervention. The average monthly abandonment rate was 12.5% (2014), 12.9% (2015), and 14.3% (2016). The cost savings from tests not performed for this 3-year period was $696,007. Molecular hematopathology assays were the most frequently ordered tests, with variable abandonment rates. Although this CDST was passive (ie, could be overridden at the point of order entry) and was associated with a relatively low abandonment rate, it achieved a considerable cost savings each year since each abandoned test saved the institution $1,000 or more.

Chapter 10: Peak Demand and Time-Differentiated Energy Savings Cross-Cutting Protocol. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurnik, Charles W; Stern, Frank; Spencer, Justin

Savings from electric energy efficiency measures and programs are often expressed in terms of annual energy and presented as kilowatt-hours per year (kWh/year). However, for a full assessment of the value of these savings, it is usually necessary to consider the measure or program's impact on peak demand as well as time-differentiated energy savings. This cross-cutting protocol describes methods for estimating the peak demand and time-differentiated energy impacts of measures implemented through energy efficiency programs.

Valuing Our Communities: Ethical Considerations for Economic Evaluation of Community-Based Prevention.

PubMed

Crowley, Max; Jones, Damon

2017-12-01

Restricted public budgets and increasing efforts to link the impact of community interventions to public savings have increased the use of economic evaluation. While this type of evaluation can be important for program planning, it also raises important ethical issues about how we value the time of local stakeholders who support community interventions. In particular, researchers navigate issues of scientific accuracy, institutional inequality, and research utility in their pursuit of even basic cost estimates. We provide an example of how we confronted these issues when estimating the costs of a large-scale community-based intervention. Principles for valuing community members' time and conducting economic evaluations of community programs are discussed. © Society for Community Research and Action 2017.

Thermoelectric property measurements with computer controlled systems

NASA Technical Reports Server (NTRS)

Chmielewski, A. B.; Wood, C.

1984-01-01

A joint JPL-NASA program to develop an automated system to measure the thermoelectric properties of newly developed materials is described. Consideration is given to the difficulties created by signal drift in measurements of Hall voltage and the Large Delta T Seebeck coefficient. The benefits of a computerized system were examined with respect to error reduction and time savings for human operators. It is shown that the time required to measure Hall voltage can be reduced by a factor of 10 when a computer is used to fit a curve to the ratio of the measured signal and its standard deviation. The accuracy of measurements of the Large Delta T Seebeck coefficient and thermal diffusivity was also enhanced by the use of computers.

Robotics in rehabilitation: technology as destiny.

PubMed

Stein, Joel

2012-11-01

Robotic aids for rehabilitation hold considerable promise but have not yet achieved widespread clinical adoption. Barriers to adoption include the limited data on efficacy, the single-purpose design of existing robots, financial considerations, and clinician lack of familiarity with this technology. Although the path forward to clinical adoption may be slow and have several false starts, the labor-saving aspect of robotic technology will ultimately ensure its adoption.

Expedited Consideration of Cuts, Consolidations, and Savings Act of 2013

THOMAS, 113th Congress

Rep. Peters, Gary C. [D-MI-14

2013-04-24

House - 04/24/2013 Referred to the Committee on the Budget, and in addition to the Committee on Rules, for a period to be subsequently determined by the Speaker, in each case for consideration of such provisions as fall within the jurisdiction of the committee concerned. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Marine microorganisms as potential biofactories for synthesis of metallic nanoparticles.

PubMed

Manivasagan, Panchanathan; Nam, Seung Yun; Oh, Junghwan

2016-11-01

The use of marine microorganisms as potential biofactories for green synthesis of metallic nanoparticles is a relatively new field of research with considerable prospects. This method is eco-friendly, time saving, and inexpensive and can be easily scaled up for large-scale synthesis. The increasing need to develop simple, nontoxic, clean, and environmentally safe production methods for nanoparticles and to decrease environmental impact, minimize waste, and increase energy productivity has become important in this field. Marine microorganisms are tiny organisms that live in marine ecosystems and account for >98% of biomass of the world's ocean. Marine microorganisms synthesize metallic nanoparticles either intracellularly or extracellularly. Marine microbially-produced metallic nanoparticles have received considerable attention in recent years because of their expected impact on various applications such as medicine, energy, electronic, and space industries. The present review discusses marine microorganisms as potential biofactories for the green synthesis of metallic nanoparticles and their potential applications.

Estimated time of arrival and debiasing the time saving bias.

PubMed

Eriksson, Gabriella; Patten, Christopher J D; Svenson, Ola; Eriksson, Lars

2015-01-01

The time saving bias predicts that the time saved when increasing speed from a high speed is overestimated, and underestimated when increasing speed from a slow speed. In a questionnaire, time saving judgements were investigated when information of estimated time to arrival was provided. In an active driving task, an alternative meter indicating the inverted speed was used to debias judgements. The simulated task was to first drive a distance at a given speed, and then drive the same distance again at the speed the driver judged was required to gain exactly 3 min in travel time compared with the first drive. A control group performed the same task with a speedometer and saved less than the targeted 3 min when increasing speed from a high speed, and more than 3 min when increasing from a low speed. Participants in the alternative meter condition were closer to the target. The two studies corroborate a time saving bias and show that biased intuitive judgements can be debiased by displaying the inverted speed. Practitioner Summary: Previous studies have shown a cognitive bias in judgements of the time saved by increasing speed. This simulator study aims to improve driver judgements by introducing a speedometer indicating the inverted speed in active driving. The results show that the bias can be reduced by presenting the inverted speed and this finding can be used when designing in-car information systems.

Effects of daylight savings time changes on stock market volatility.

PubMed

Berument, M Hakan; Dogan, Nukhet; Onar, Bahar

2010-04-01

The presence of daylight savings time effects on stock returns and on stock volatility was investigated using an EGARCH specification to model the conditional variance. The evidence gathered from the major United States stock markets for the period between 1967 and 2007 did not support the existence of the daylight savings time effect on stock returns or on volatility. Returns on the first business day following daylight savings time changes were not lower nor was the volatility higher, as would be expected if there were an effect.

The Impact of Social and Financial Education on Savings Attitudes and Behavior Among Primary School Children in Uganda.

PubMed

Supanantaroek, Suthinee; Lensink, Robert; Hansen, Nina

2016-09-07

Saving plays a crucial role in the process of economic growth. However, one main reason why poor people often do not save is that they lack financial knowledge. Improving the savings culture of children through financial education is a promising way to develop savings attitudes and behavior early in life. This study is one of the first that examines the effects of social and financial education training and a children's club developed by Aflatoun on savings attitudes and behavior among primary school children in Uganda, besides Berry, Karlan, and Pradhan. A randomized phase in approach was used by randomizing the order in which schools implemented the program (school-level randomization). The treatment group consisted of students in schools where the program was implemented, while in the control group the program was not yet implemented. The program lasted 3 months including 16 hours. We compared posttreatment variables for the treatment and control group. Study participants included 1,746 students, of which 936 students were from 22 schools that were randomly assigned to receive the program between May and July 2011; the remaining 810 students attended 22 schools that did not implement the program during the study period. Indicators for children's savings attitudes and behavior were key outcomes. The intervention increased awareness of money, money recording, and savings attitudes. It also provides some evidence-although less robust-that the intervention increased actual savings. A short financial literacy and social training can improve savings attitudes and behavior of children considerably. © The Author(s) 2016.

A SIEPON based transmitter sleep mode energy-efficient mechanism in EPON

NASA Astrophysics Data System (ADS)

Nikoukar, AliAkbar; Hwang, I.-Shyan; Wang, Chien-Jung; Ab-Rahman, Mohammad Syuhaimi; Liem, Andrew Tanny

2015-06-01

The main energy consumption in computer networks is the access networks. The passive optical network (PON) has the least energy consumption among access network technologies. In addition, the time division multiplexing (TDM) Ethernet PON (EPON) is one of the best candidates to improve energy consumption by time utilization. The optical network unit (ONU) can utilize the time and save the energy in the EPON by turning off its transmitter/receiver when there is no upstream/downstream traffic. The ITU-T and IEEE organizations are published standards for energy-saving in the TDM-PON. Although their standards provide the framework to accomplish the energy-saving, the algorithms/criteria to generate events to accommodate various operational policies, time to wake up, parameter values for timers are out of scope of the standards. Many studies have proposed schemes for energy-saving in TDM-PON to achieve maximum energy saving. Even so, these schemes increase the mean packet delay and consequently, reduce the quality of service (QoS). In this paper, first we take a look to the state of the art for PON energy-saving. Additionally, a mechanism based on SIEPON standard in EPON with new components in the ONUs and optical line terminal (OLT) is proposed to save the transmitter energy and guarantee QoS. The proposed mechanism follows the SIEPON standard, considers the QoS first, and then saves the energy as far as possible. The ONU sleep controller unit (OSC) and green dynamic bandwidth allocation (GDBA) are used to calculate the ONU transmitter sleep (Tx) duration and grant the proper time to the ONUs. Simulation results show that the proposed energy-saving mechanism not only promises the QoS performance in terms of mean packet delay, packet loss, throughput, and jitter, but also saves energy in different maximum cycle times.

Modal shifts in short-haul passenger travel and the consequent energy impacts. [Intercity travel under 500 miles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1980-03-01

A study was performed to evaluate the impacts of strategies to effect modal shifts in short-haul passenger travel (defined herein as intercity travel under 500 miles) from energy-intensive modes to those modes that are less energy-intensive. A series of individual strategies, ranging from incentives to the less energy-intensive modes (bus, rail) to penalties to the more energy-intensive modes (auto, air) was examined to determine energy saved and policy implications relative to strategy implementation. The most effective of the individual strategies were then combined in all permutations, and the analysis was repeated. As part of the analytical process, effects of factorsmore » other than energy (user cost and time, emissions, government subsidy, and travel fatailities) were examined in a benefit/cost analysis. Finally, energy savings, benefit/cost impacts, implementation considerations, and policy implications were evaluated to arrive at conclusions as to the effectiveness of the more-influential strategies and to the overall effectiveness of induced modal shifts. The principal conclusion of the study is that the maximum 1980 energy saving that might be realized by modal shifts, discounting the concurrent effects of demand suppression and improvement of mode efficiency, is approximately 83 x 10/sup 12/ Btu (46,500 bbl gasoline per day), 3.8% of the total projected 1980 energy consumption in the short-haul transportation sector and 0.23% of the total US petroleum use. It was also concluded that strategies to achieve these small savings by modal shifts would result in significant economic, social, and business disruptions.« less

Cost-Effective Experiments on the Diffraction and Interference of Light.

ERIC Educational Resources Information Center

Sprigham, S. V.

2000-01-01

Presents an alternative experimental arrangement that results in a considerable cost savings by reducing the number of sensors and other apparati required while giving excellent quantitative results for comparison with theory. (Author/CCM)

Designing to Save Energy

ERIC Educational Resources Information Center

Santamaria, Joseph W.

1977-01-01

While tripling the campus size of Alvin Community College in Texas, architects and engineers cut back on nonessential lighting, recaptured waste heat, insulated everything possible, and let energy considerations dictate the size and shape of the building. (Author/MLF)

Energy Efficient Operation of Ammonia Refrigeration Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mohammed, Abdul Qayyum; Wenning, Thomas J; Sever, Franc

Ammonia refrigeration systems typically offer many energy efficiency opportunities because of their size and complexity. This paper develops a model for simulating single-stage ammonia refrigeration systems, describes common energy saving opportunities, and uses the model to quantify those opportunities. The simulation model uses data that are typically available during site visits to ammonia refrigeration plants and can be calibrated to actual consumption and performance data if available. Annual electricity consumption for a base-case ammonia refrigeration system is simulated. The model is then used to quantify energy savings for six specific energy efficiency opportunities; reduce refrigeration load, increase suction pressure, employmore » dual suction, decrease minimum head pressure set-point, increase evaporative condenser capacity, and reclaim heat. Methods and considerations for achieving each saving opportunity are discussed. The model captures synergistic effects that result when more than one component or parameter is changed. This methodology represents an effective method to model and quantify common energy saving opportunities in ammonia refrigeration systems. The results indicate the range of savings that might be expected from common energy efficiency opportunities.« less

Reports.

ERIC Educational Resources Information Center

Science, 1980

1980-01-01

Proposes that human comfort could be provided in otherwise chilly surroundings by filling the occupied space with electromagnetic energy of cm wavelength. Considerable energy savings could be realized from the resultant ability to lower interior temperatures and maintain comfort in the building. (Author/RE)

LIGHTWEIGHT GREEN ROOF SYSTEMS

EPA Science Inventory

Applying a Lightweight Green Roof System to a building can achieve in managing storm water runoff, decreasing heat gain, yielding energy savings, and mitigating the heat island effect. Currently, Most green roof systems are considerably heavy and require structural reinforceme...

Neutron skyshine calculations for the PDX tokamak

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wheeler, F.J.; Nigg, D.W.

1979-01-01

The Poloidal Divertor Experiment (PDX) at Princeton will be the first operating tokamak to require a substantial radiation shield. The PDX shielding includes a water-filled roof shield over the machine to reduce air scattering skyshine dose in the PDX control room and at the site boundary. During the design of this roof shield a unique method was developed to compute the neutron source emerging from the top of the roof shield for use in Monte Carlo skyshine calculations. The method is based on simple, one-dimensional calculations rather than multidimensional calculations, resulting in considerable savings in computer time and input preparationmore » effort. This method is described.« less

Combining Thermal And Structural Analyses

NASA Technical Reports Server (NTRS)

Winegar, Steven R.

1990-01-01

Computer code makes programs compatible so stresses and deformations calculated. Paper describes computer code combining thermal analysis with structural analysis. Called SNIP (for SINDA-NASTRAN Interfacing Program), code provides interface between finite-difference thermal model of system and finite-element structural model when no node-to-element correlation between models. Eliminates much manual work in converting temperature results of SINDA (Systems Improved Numerical Differencing Analyzer) program into thermal loads for NASTRAN (NASA Structural Analysis) program. Used to analyze concentrating reflectors for solar generation of electric power. Large thermal and structural models needed to predict distortion of surface shapes, and SNIP saves considerable time and effort in combining models.

Program Helps Decompose Complex Design Systems

NASA Technical Reports Server (NTRS)

Rogers, James L., Jr.; Hall, Laura E.

1995-01-01

DeMAID (Design Manager's Aid for Intelligent Decomposition) computer program is knowledge-based software system for ordering sequence of modules and identifying possible multilevel structure for design problems such as large platforms in outer space. Groups modular subsystems on basis of interactions among them. Saves considerable amount of money and time in total design process, particularly in new design problem in which order of modules has not been defined. Originally written for design problems, also applicable to problems containing modules (processes) that take inputs and generate outputs. Available in three machine versions: Macintosh written in Symantec's Think C 3.01, Sun, and SGI IRIS in C language.

GAUGING APPARATUS

DOEpatents

Ruggles, C.A.

1957-08-27

A swinging arm gage designed to measure radial angles, tapering, sloping, or arcuate concave surfaces is described. The principle of the swinging arm gage is that in any spherical system, radii and radial lines established by them pass through the center of the sphere. Thus if an arm be made to pivot at the sphere center, the path of the swinging end can be guided by a can so set as to establish the proper center angle, and dial indicators on the arm can be zeroed on a master object, angular and dimensional manufacturing errors can be determined on a duplicate object. This device makes possible a considerable saving of time in measuring complex arcuate contours.

Some considerations in the design of transport aircraft /The W. Rupert Turnbull Lecture for 1975/

NASA Technical Reports Server (NTRS)

Jones, R. T.

1975-01-01

The slow landing speeds (30 mph, 65 mph) and light wing loading required for safety in the early days of aviation are shown to be irrelevant to safe landings of propeller-driven aircraft, while increases in wing loading and landing speed have been accompanied by improved safety records. This is attributed to length of runway and time available for approach maneuvers, plus immunity to wind gusts and turbulence conferred by higher wing loadings. Aerodynamical and mechanical aspects of safe landing are discussed, with no mention of instruments. Fuel savings achievable through high aspect ratio, variable sweep angle, and supercritical airfoils are also considered.

Accounting for location and timing in NO{sub x} emission trading programs. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nichols, A.L.

1997-12-01

This report describes approaches to designing emission trading programs for nitrogen oxides (NO{sub x}) to account for the locations of emission sources. When a trading region is relatively small, program managers can assume that the location of the sources engaging in trades has little or no effect. However, if policy makers extend the program to larger regions, this assumption may be questioned. Therefore, EPRI has undertaken a survey of methods for incorporating location considerations into trading programs. Application of the best method may help to preserve, and even enhance, the flexibility and savings afforded utilities by emission trading.

Minimizing Dispersion in FDTD Methods with CFL Limit Extension

NASA Astrophysics Data System (ADS)

Sun, Chen

The CFL extension in FDTD methods is receiving considerable attention in order to reduce the computational effort and save the simulation time. One of the major issues in the CFL extension methods is the increased dispersion. We formulate a decomposition of FDTD equations to study the behaviour of the dispersion. A compensation scheme to reduce the dispersion in CFL extension is constructed and proposed. We further study the CFL extension in a FDTD subgridding case, where we improve the accuracy by acting only on the FDTD equations of the fine grid. Numerical results confirm the efficiency of the proposed method for minimising dispersion.

Energy Savings by Treating Buildings as Systems

NASA Astrophysics Data System (ADS)

Harvey, L. D. Danny

2008-09-01

This paper reviews the opportunities for dramatically reducing energy use in buildings by treating buildings as systems, rather than focusing on device efficiencies. Systems-level considerations are relevant for the operation of heat pumps (where the temperatures at which heat or coldness are distributed are particularly important); the joint or separate provision of heating, cooling, and ventilation; the joint or separate removal of sensible heat and moisture; and in the operation of fluid systems having pumps. Passive heating, cooling, and ventilation, as well as daylighting (use of sunlight for lighting purposes) also require consideration of buildings as systems. In order to achieve the significant (50-75%) energy savings that are possible through a systems approach, the design process itself has to involve a high degree of integration between the architect and various engineering disciplines (structural, mechanical, electrical), and requires the systematic examination and adjustment of alternative designs using computer simulation models.

Holistic Design for Total Product Well Being

NASA Technical Reports Server (NTRS)

Adams, Chris W.; Hamilton, George S.

2004-01-01

Recent hardware development work at NASA's Marshall Space Flight Center creates and argument for the use of a holistic design approach as opposed to a piece part design approach. A piece part design approach being one where individual pieces are developed to their finished state having to meet certain interface and human engineering requirements without much consideration to the final product as a whole. A holistic design approach being one where the final product is evaluated early and frequently during the design process, and individual parts are developed with consideration to how they interact a whole,and how they interact with the user and environment. Examples from the development of the Materials Science Research Rack - 1 will illustrate: a design failure due to piece part design; a design save, due to a failure of piece part design, but saved by evaluating the design holistically; and a design success due to a holistic design approach.

Impact of a University-Based Outpatient Telemedicine Program on Time Savings, Travel Costs, and Environmental Pollutants.

PubMed

Dullet, Navjit W; Geraghty, Estella M; Kaufman, Taylor; Kissee, Jamie L; King, Jesse; Dharmar, Madan; Smith, Anthony C; Marcin, James P

2017-04-01

The objective of this study was to estimate travel-related and environmental savings resulting from the use of telemedicine for outpatient specialty consultations with a university telemedicine program. The study was designed to retrospectively analyze the telemedicine consultation database at the University of California Davis Health System (UCDHS) between July 1996 and December 2013. Travel distances and travel times were calculated between the patient home, the telemedicine clinic, and the UCDHS in-person clinic. Travel cost savings and environmental impact were calculated by determining differences in mileage reimbursement rate and emissions between those incurred in attending telemedicine appointments and those that would have been incurred if a visit to the hub site had been necessary. There were 19,246 consultations identified among 11,281 unique patients. Telemedicine visits resulted in a total travel distance savings of 5,345,602 miles, a total travel time savings of 4,708,891 minutes or 8.96 years, and a total direct travel cost savings of $2,882,056. The mean per-consultation round-trip distance savings were 278 miles, average travel time savings were 245 minutes, and average cost savings were $156. Telemedicine consultations resulted in a total emissions savings of 1969 metric tons of CO 2 , 50 metric tons of CO, 3.7 metric tons of NO x , and 5.5 metric tons of volatile organic compounds. This study demonstrates the positive impact of a health system's outpatient telemedicine program on patient travel time, patient travel costs, and environmental pollutants. Copyright © 2017 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Energy savings opportunity survey at Walter Reed Army Medical Center, Washington, DC. Final Submittal report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1987-10-22

This Energy Savings Opportunity Survey (ESOS) was performed for sixteen (16) buildings at Walter Reed Army Medical Center (WPAMC) in Washington, D.C. This survey was intended to reevaluate and update projects from a previous Energy Engineering Analysis Program (EEAP) survey performed at WRAMC. However, the previous EEAP survey was determined by the contracting officer to be incomplete and not worthy of further consideration. Therefore, this survey involved the complete reevaluation of the buildings to determine their potential energy cost savings. Six (6) projects and nine (9) low cost/no cost energy conservation opportunities (ECO`s) are recommended for implementation in the buildings.more » These projects and ECO`s are projected to annually save $448,263 at an implementation cost of $891,659. The simple payback (i.e., implementation cost divided by cost savings) for the recommendations in the survey is 1.99 years. The two (2) projects with the greatest cost savings are a stack heat recovery system (Project Number 5) and HVAC modifications (Project Number 1). These two (2) projects will provide 67% of the projected total savings for the survey. The sixteen (16) buildings in this survey represent only 22% of the total floor area of the Walter Reed Army Medical Center complex. It is believed that significant potential energy cost savings amounting to two (2) million dollars may be achieved in the remaining buildings in the complex not included in this survey. Specifically it is believed the main hospital building contains many opportunities for substantial cost savings.« less

Productivity Savings from Colorectal Cancer Prevention and Control Strategies

PubMed Central

Bradley, Cathy J.; Lansdorp-Vogelaar, Iris; Yabroff, K. Robin; Dahman, Bassam; Mariotto, Angela; Feuer, Eric J.; Brown, Martin L.

2011-01-01

Background Lost productivity represents a considerable portion of the total economic burden of colorectal cancer (CRC), but cost-effectiveness studies of CRC prevention and control have not included these costs and therefore underestimate potential savings from CRC prevention and control. Purpose To use microsimulation modeling study to estimate and project productivity costs of CRC and to model the savings from four approaches to reducing CRC incidence and mortality: risk factor reduction, improved screening, improved treatment, and a simultaneous approach where all three strategies are implemented. Methods A model was developed to project productivity losses from CRC using the U.S. population with CRC incidence and mortality projected through the year 2020. Outcome measures were CRC mortality, morbidity, and productivity savings. Results With 2005 levels in risk factors, screening, and treatment, 48,748 CRC deaths occurred in 2010, amounting to $21 billion of lost productivity. Using prevention and treatment strategies simultaneously, 3586 deaths could have been avoided in 2010, leading to a savings of $1.4 billion. Cumulatively, by 2020, simultaneous strategies that reduce risk factors and increase screening and treatment could result in 101,353 deaths avoided and $33.9 billion in savings in reduced productivity loss. Improved screening rates alone led to nearly $14.7 billion in savings between 2005 and 2020, followed by risk factor reduction ($12.4 billion) and improved treatment ($8.4 billion). Conclusions The savings in productivity loss from strategies to reduce CRC incidence and mortality are substantial, providing evidence that CRC prevention and control strategies are likely to be cost-saving. PMID:21767717

Productivity savings from colorectal cancer prevention and control strategies.

PubMed

Bradley, Cathy J; Lansdorp-Vogelaar, Iris; Yabroff, K Robin; Dahman, Bassam; Mariotto, Angela; Feuer, Eric J; Brown, Martin L

2011-08-01

Lost productivity represents a considerable portion of the total economic burden of colorectal cancer (CRC), but cost-effectiveness studies of CRC prevention and control have not included these costs and therefore underestimate potential savings from CRC prevention and control. To use microsimulation modeling study to estimate and project productivity costs of CRC and to model the savings from four approaches to reducing CRC incidence and mortality: risk factor reduction, improved screening, improved treatment, and a simultaneous approach where all three strategies are implemented. A model was developed to project productivity losses from CRC using the U.S. population with CRC incidence and mortality projected through the year 2020. Outcome measures were CRC mortality, morbidity, and productivity savings. With 2005 levels in risk factors, screening, and treatment, 48,748 CRC deaths occurred in 2010, amounting to $21 billion of lost productivity. Using prevention and treatment strategies simultaneously, 3586 deaths could have been avoided in 2010, leading to a savings of $1.4 billion. Cumulatively, by 2020, simultaneous strategies that reduce risk factors and increase screening and treatment could result in 101,353 deaths avoided and $33.9 billion in savings in reduced productivity loss. Improved screening rates alone led to nearly $14.7 billion in savings between 2005 and 2020, followed by risk factor reduction ($12.4 billion) and improved treatment ($8.4 billion). The savings in productivity loss from strategies to reduce CRC incidence and mortality are substantial, providing evidence that CRC prevention and control strategies are likely to be cost-saving. Copyright © 2011 American Journal of Preventive Medicine. All rights reserved.

Weight and power savings shaft encoder interfacing techniques for aerospace applications

NASA Technical Reports Server (NTRS)

Breslow, Donald H.

1986-01-01

Many aerospace applications for shaft angle digitizers such as optical shaft encoders require special features that are not usually required on commercial products. Among the most important user considerations are the lowest possible weight and power consumption. A variety of mechanical and electrical interface techniques that have large potential weight and power savings are described. The principles to be presented apply to a wide variety of encoders, ranging from 16 to 22 bit resolution and with diameters from 152 to 380 mm (6 to 15 in.).

Health care costs: saving in the private sector.

PubMed

Robeson, F E

1979-01-01

Robeson offers a number of options to employers to help reduce the impact of increasing health care costs. He points out that large organizations which employ hundreds of people have considerable market power which can be exerted to contain costs. It is suggested that the risk management departments assume the responsibility for managing the effort to reduce the costs of medical care and of the health insurance programs of these organizations since that staff is experienced at evaluating premiums and negotiating with third-party payors. The article examines a number of short-run strategies for firms to pursue to contain health care costs: (1) use alternative delivery systems such as health maintenance organizations (HMOs) which have cost-cutting potential but require marketing efforts to persuade employees of their desirability; (2) contracts with third-party payors which require a second opinion (peer review), a practice which saved one labor union over $2 million from 1972 to 1976; (3) implementation of insurance coverage for less expensive outpatient care; and (4) the use of claims review. These strategies are compared in terms of four criteria: supply of demand for health services; management effort; cost; and time necessary for realized savings. Robeson concludes that development of a management plan for containing health care costs requires an extensive analysis of alternatives, organizational objectives, existing policies, and resources, and offers a table summarizing the cost-containment strategies that a firm should consider.

Safety and cost savings of reducing adult dengue hospitalization in a tertiary care hospital in Singapore.

PubMed

Lee, Linda K; Earnest, Arul; Carrasco, Luis R; Thein, Tun L; Gan, Victor C; Lee, Vernon J; Lye, David C; Leo, Yee-Sin

2013-01-01

Previously, most dengue cases in Singapore were hospitalized despite low incidence of dengue hemorrhagic fever (DHF) or death. To minimize hospitalization, the Communicable Disease Centre at Tan Tock Seng Hospital (TTSH) in Singapore implemented new admission criteria which included clinical, laboratory, and DHF predictive parameters in 2007. All laboratory-confirmed dengue patients seen at TTSH during 2006-2008 were retrospectively reviewed for clinical data. Disease outcome and clinical parameters were compared over the 3 years. There was a 33.0% mean decrease in inpatients after the new criteria were implemented compared with the period before (p < 0.001). The proportion of inpatients with DHF increased significantly from 31.7% in 2006 to 34.4% in 2008 (p = 0.008); 68 DHF cases were managed safely on an outpatient basis after compared with none before implementation. DHF inpatients had more serious signs such as clinical fluid accumulation (15.5% vs 2.9% of outpatients), while most DHF outpatients had hypoproteinemia (92.7% vs 81.3% of inpatients). The eight intensive care unit admissions and five deaths during this time period all occurred among inpatients. The new criteria resulted in a median cost saving of US$1.4 million to patients in 2008. The new dengue admission criteria were effective in sustainably reducing length of hospitalization, yielding considerable cost savings. A minority of DHF patients with mild symptoms recovered uneventfully through outpatient management.

Reducing the length of postnatal hospital stay: implications for cost and quality of care.

PubMed

Bowers, John; Cheyne, Helen

2016-01-15

UK health services are under pressure to make cost savings while maintaining quality of care. Typically reducing the length of time patients stay in hospital and increasing bed occupancy are advocated to achieve service efficiency. Around 800,000 women give birth in the UK each year making maternity care a high volume, high cost service. Although average length of stay on the postnatal ward has fallen substantially over the years there is pressure to make still further reductions. This paper explores and discusses the possible cost savings of further reductions in length of stay, the consequences for postnatal services in the community, and the impact on quality of care. We draw on a range of pre-existing data sources including, national level routinely collected data, workforce planning data and data from national surveys of women's experience. Simulation and a financial model were used to estimate excess demand, work intensity and bed occupancy to explore the quantitative, organisational consequences of reducing the length of stay. These data are discussed in relation to findings of national surveys to draw inferences about potential impacts on cost and quality of care. Reducing the length of time women spend in hospital after birth implies that staff and bed numbers can be reduced. However, the cost savings may be reduced if quality and access to services are maintained. Admission and discharge procedures are relatively fixed and involve high cost, trained staff time. Furthermore, it is important to retain a sufficient bed contingency capacity to ensure a reasonable level of service. If quality of care is maintained, staffing and bed capacity cannot be simply reduced proportionately: reducing average length of stay on a typical postnatal ward by six hours or 17% would reduce costs by just 8%. This might still be a significant saving over a high volume service however, earlier discharge results in more women and babies with significant care needs at home. Quality and safety of care would also require corresponding increases in community based postnatal care. Simply reducing staffing in proportion to the length of stay increases the workload for each staff member resulting in poorer quality of care and increased staff stress. Many policy debates, such as that about the length of postnatal hospital-stay, demand consideration of multiple dimensions. This paper demonstrates how diverse data sources and techniques can be integrated to provide a more holistic analysis. Our study suggests that while earlier discharge from the postnatal ward may achievable, it may not generate all of the anticipated cost savings. Some useful savings may be realised but if staff and bed capacity are simply reduced in proportion to the length of stay, care quality may be compromised.

Are breast cancer navigation programs cost-effective? Evidence from the Chicago Cancer Navigation Project.

PubMed

Markossian, Talar W; Calhoun, Elizabeth A

2011-01-01

One of the aims of the Chicago Cancer Navigation Project (CCNP) is to reduce the interval of time between abnormal breast cancer screening and definitive diagnosis in patients who are navigated as compared to usual care. In this article, we investigate the extent to which total costs of breast cancer navigation can be offset by survival benefits and savings in lifetime breast cancer-attributable costs. Data sources for the cost-effectiveness analysis include data from published literature, secondary data from the NCI's Surveillance Epidemiology and End Results (SEER) program, and primary data from the CCNP. If women enrolled in CCNP receive breast cancer diagnosis earlier by 6 months as compared to usual care, then navigation is borderline cost-effective for $95,625 per life-year saved. Results from sensitivity analyses suggest that the cost-effectiveness of navigation is sensitive to: the interval of time between screening and diagnosis, percent increase in number of women who receive cancer diagnosis and treatment, women's age, and the positive predictive value of a mammogram. In planning cost-effective navigation programs, special considerations should be made regarding the characteristics of the disease, program participants, and the initial screening test that determines program eligibility. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Disk space and load time requirements for eye movement biometric databases

NASA Astrophysics Data System (ADS)

Kasprowski, Pawel; Harezlak, Katarzyna

2016-06-01

Biometric identification is a very popular area of interest nowadays. Problems with the so-called physiological methods like fingerprints or iris recognition resulted in increased attention paid to methods measuring behavioral patterns. Eye movement based biometric (EMB) identification is one of the interesting behavioral methods and due to the intensive development of eye tracking devices it has become possible to define new methods for the eye movement signal processing. Such method should be supported by an efficient storage used to collect eye movement data and provide it for further analysis. The aim of the research was to check various setups enabling such a storage choice. There were various aspects taken into consideration, like disk space usage, time required for loading and saving whole data set or its chosen parts.

Fatal alcohol-related traffic crashes increase subsequent to changes to and from daylight savings time.

PubMed

Hicks, G J; Davis, J W; Hicks, R A

1998-06-01

On the hypothesis that sleepiness and alcohol interact to increase the risk of alcohol-related traffic fatalities, the percentages of alcohol-related fatal traffic crashes were assessed for the entire state of New Mexico for the years 1989-1992, for each of the seven days that preceded the changes to and from Daylight Savings Time and for each of the 14 days which followed the changes to and from Daylight Savings Time. Consistent with our hypothesis the percentage of alcohol-related fatal crashes increased significantly during the first seven days after these changes in Daylight Savings Time.

Daylight saving time transitions and hospital treatments due to accidents or manic episodes

PubMed Central

Lahti, Tuuli A; Haukka, Jari; Lönnqvist, Jouko; Partonen, Timo

2008-01-01

Background Daylight saving time affects millions of people annually but its impacts are still widely unknown. Sleep deprivation and the change of circadian rhythm can trigger mental illness and cause higher accident rates. Transitions into and out of daylight saving time changes the circadian rhythm and may cause sleep deprivation. Thus it seems plausible that the prevalence of accidents and/or manic episodes may be higher after transition into and out of daylight saving time. The aim of this study was to explore the effects of transitions into and out of daylight saving time on the incidence of accidents and manic episodes in the Finnish population during the years of 1987 to 2003. Methods The nationwide data were derived from the Finnish Hospital Discharge Register. From the register we obtained the information about the hospital-treated accidents and manic episodes during two weeks before and two weeks after the transitions in 1987–2003. Results The results were negative, as the transitions into or out of daylight saving time had no significant effect on the incidence of accidents or manic episodes. Conclusion One-hour transitions do not increase the incidence of manic episodes or accidents which require hospital treatment. PMID:18302734

Energy & Cost Savings | Efficient Windows Collaborative

Science.gov Websites

Foundry Foundry New Construction Windows Window Selection Tool Selection Process Design Guidance Installation Replacement Windows Window Selection Tool Assessing Options Selection Process Design Guidance Installation Understanding Windows Benefits Design Considerations Measuring Performance Performance Standards

Solar Schematic

NASA Technical Reports Server (NTRS)

1979-01-01

The home shown at right is specially designed to accommodate solar heating units; it has roof planes in four directions, allowing placement of solar collectors for best exposure to the sun. Plans (bottom) and complete working blueprints for the solar-heated house are being marketed by Home Building Plan Service, Portland, Oregon. The company also offers an inexpensive schematic (center) showing how a homeowner only moderately skilled in the use of tools can build his own solar energy system, applicable to new or existing structures. The schematic is based upon the design of a low-cost solar home heating system built and tested by NASA's Langley Research Center; used to supplement a warm-air heating system, it can save the homeowner about 40 percent of his annual heating bill for a modest investment in materials and components. Home Building Plan Service saved considerable research time by obtaining a NASA technical report which details the Langley work. The resulting schematic includes construction plans and simplified explanations of solar heat collection, collectors and other components, passive heat factors, domestic hot water supply and how to work with local heating engineers.

Achieving cost-neutrality with long-acting reversible contraceptive methods.

PubMed

Trussell, James; Hassan, Fareen; Lowin, Julia; Law, Amy; Filonenko, Anna

2015-01-01

This analysis aimed to estimate the average annual cost of available reversible contraceptive methods in the United States. In line with literature suggesting long-acting reversible contraceptive (LARC) methods become increasingly cost-saving with extended duration of use, it aimed to also quantify minimum duration of use required for LARC methods to achieve cost-neutrality relative to other reversible contraceptive methods while taking into consideration discontinuation. A three-state economic model was developed to estimate relative costs of no method (chance), four short-acting reversible (SARC) methods (oral contraceptive, ring, patch and injection) and three LARC methods [implant, copper intrauterine device (IUD) and levonorgestrel intrauterine system (LNG-IUS) 20 mcg/24 h (total content 52 mg)]. The analysis was conducted over a 5-year time horizon in 1000 women aged 20-29 years. Method-specific failure and discontinuation rates were based on published literature. Costs associated with drug acquisition, administration and failure (defined as an unintended pregnancy) were considered. Key model outputs were annual average cost per method and minimum duration of LARC method usage to achieve cost-savings compared to SARC methods. The two least expensive methods were copper IUD ($304 per women, per year) and LNG-IUS 20 mcg/24 h ($308). Cost of SARC methods ranged between $432 (injection) and $730 (patch), per women, per year. A minimum of 2.1 years of LARC usage would result in cost-savings compared to SARC usage. This analysis finds that even if LARC methods are not used for their full durations of efficacy, they become cost-saving relative to SARC methods within 3 years of use. Previous economic arguments in support of using LARC methods have been criticized for not considering that LARC methods are not always used for their full duration of efficacy. This study calculated that cost-savings from LARC methods relative to SARC methods, with discontinuation rates considered, can be realized within 3 years. Copyright © 2014 Elsevier Inc. All rights reserved.

Achieving cost-neutrality with long-acting reversible contraceptive methods⋆

PubMed Central

Trussell, James; Hassan, Fareen; Lowin, Julia; Law, Amy; Filonenko, Anna

2014-01-01

Objectives This analysis aimed to estimate the average annual cost of available reversible contraceptive methods in the United States. In line with literature suggesting long-acting reversible contraceptive (LARC) methods become increasingly cost-saving with extended duration of use, it aimed to also quantify minimum duration of use required for LARC methods to achieve cost-neutrality relative to other reversible contraceptive methods while taking into consideration discontinuation. Study design A three-state economic model was developed to estimate relative costs of no method (chance), four short-acting reversible (SARC) methods (oral contraceptive, ring, patch and injection) and three LARC methods [implant, copper intrauterine device (IUD) and levonorgestrel intrauterine system (LNG-IUS) 20 mcg/24 h (total content 52 mg)]. The analysis was conducted over a 5-year time horizon in 1000 women aged 20–29 years. Method-specific failure and discontinuation rates were based on published literature. Costs associated with drug acquisition, administration and failure (defined as an unintended pregnancy) were considered. Key model outputs were annual average cost per method and minimum duration of LARC method usage to achieve cost-savings compared to SARC methods. Results The two least expensive methods were copper IUD ($304 per women, per year) and LNG-IUS 20 mcg/24 h ($308). Cost of SARC methods ranged between $432 (injection) and $730 (patch), per women, per year. A minimum of 2.1 years of LARC usage would result in cost-savings compared to SARC usage. Conclusions This analysis finds that even if LARC methods are not used for their full durations of efficacy, they become cost-saving relative to SARC methods within 3 years of use. Implications Previous economic arguments in support of using LARC methods have been criticized for not considering that LARC methods are not always used for their full duration of efficacy. This study calculated that cost-savings from LARC methods relative to SARC methods, with discontinuation rates considered, can be realized within 3 years. PMID:25282161

Unmet need for specialised rehabilitation following neurosurgery: can we maximise the potential cost-benefits?

PubMed

Singh, Rajiv; Sinha, Saurabh; Bill, Alan; Turner-Stokes, Lynne

2017-04-01

To identify the needs for specialised rehabilitation provision in a cohort of neurosurgical patients; to determine if these were met, and to estimate the potential cost implications and cost-benefits of meeting any unmet rehabilitation needs. A prospective study of in-patient admissions to a regional neurosurgical ward. Assessment of needs for specialised rehabilitation (Category A or B needs) was made with the Patient Categorisation Tool. The number of patients who were referred and admitted for specialised rehabilitation was calculated. Data from the unit's submission to the UK Rehabilitation Outcomes Collaborative (UKROC) national clinical database 2012-2015 were used to estimate the potential mean lifetime savings generated through reduction in the costs of on-going care in the community. Of 223 neurosurgical in-patients over 3 months, 156 (70%) had Category A or B needs. Out of the 105 patients who were eligible for admission to the local specialised rehabilitation service, only 20 (19%) were referred and just 11 (10%) were actually admitted. The mean transfer time was 70.2 (range 28-127) days, compared with the national standard of 42 days. In the 3-year sample, mean savings in the cost of on-going care were £568 per week. Assuming a 10-year reduction in life expectancy, the approximate net lifetime saving for post-neurosurgical patients was estimated as at least £600K per patient. We calculated that provision of additional bed capacity in the specialist rehabilitation unit could generate net savings of £3.6M/bed-year. This preliminary single-centre study identified a considerable gap in provision of specialised rehabilitation for neurosurgical patients, which must be addressed if patients are to fulfil their potential for recovery. A 5-fold increase in bed capacity would cost £9.3m/year, but could lead to potential net savings of £24m/year. Our findings now require confirmation on a wider scale through prospective multi-centre studies.

Beer, Wood, and Welfare ‒ The Impact of Improved Stove Use Among Dolo-Beer Breweries

PubMed Central

2015-01-01

Local beer breweries in Burkina Faso absorb a considerable amount of urban woodfuel demand. We assess the woodfuel savings caused by the adoption of improved brewing stoves by these micro-breweries and estimate the implied welfare effects through the woodfuel market on private households as well as the environmental effect. We find substantial wood savings among the breweries, 36% to 38% if they fully switch to an improved stove. In absolute amounts, they save about 0.176 kg of fuelwood per litre of dolo brewed. These savings imply huge reductions in CO2-emissions and reduce the overall demand for woodfuel, which is predominantly used by the poorer strata for cooking purposes. We provide estimates for the price decrease that might result from this and show that the urban poor are likely to benefit. Thus, the intervention under study is an example for a green growth intervention with pro-poor welfare gains – something green growth strategies should look for. PMID:26244341

The usage of waste heat recovery units with improved heat engineering rates: theory and experimental research

NASA Astrophysics Data System (ADS)

Chebotarev, Victor; Koroleva, Alla; Pirozhnikova, Anastasia

2017-10-01

Use of recuperator in heat producing plants for utilization of natural gas combustion products allows to achieve the saving of gas fuel and also provides for environmental sanitation. Decrease of the volumes of natural gas combustion due to utilization of heat provides not only for reduction of harmful agents in the combustion products discharged into the atmosphere, but also creates conditions for increase of energy saving in heating processes of heat producing plants due to air overheating in the recuperator. Grapho-analytical method of determination of energy saving and reduction of discharges of combustion products into the atmosphere is represented in the article. Multifunctional diagram is developed, allowing to determine simultaneously savings from reduction of volumes of natural gas combusted and from reduction of amounts of harmful agents in the combustion products discharged into the atmosphere. Calculation of natural gas economy for heat producing plant taking into consideration certain capacity is carried out.

[Saving motives in young, middle-aged, and older adults. Preliminary results of a new inventory for exploring lifespan saving motives].

PubMed

Rager, B; Lang, F R; Wagner, G G

2012-12-01

There is some research on personal reasons for saving money in the economic sciences. However, not much is known about the age differences of saving motives. In this vein, the future time perspective (FTP) is known to play a critical role for motivation across the life span. In this study, we introduce a new Saving Motive Inventory (SMI), which also covers saving goals after retirement. Furthermore, it is argued that additional saving motives that are not based on economic models of life-cycle saving also exist. In accordance with the socio-emotional selectivity theory, we explored age differences in an online survey with 496 participants from young (19-44 years), middle-aged (45-64 years), and older (65-86 years) adulthood, who completed a questionnaire on saving motives, personality, and future-related thinking (e.g., Future Time Perspective Scale, Life Orientation Test). Results of the explorative Factor Analysis (EFA) are consistent with the theoretical expectations. The factors are generativity, educational investment, consumption, indifference, and provision for death and dying. Together these five factors account for 67% of the variance. In general, the inventory is reliable and valid with respect to the expected internal and external criteria. It contributes to better understanding of saving motives over the lifespan, especially with respect to effects of the future time perspective.

The effectiveness of the 55 MPH national maximum speed limit as a life saving benefit

DOT National Transportation Integrated Search

1980-10-01

The report contains an analysis of the life saving benefits resulting from the 55 mph NMSL from 1974-1979. Monthly fatality data from 1970-1979 was used in a time series model to arrive at the estimated safety benefits (lives saved). The time series ...

The New Jersey Medicaid ACO Demonstration Project: seeking opportunities for better care and lower costs among complex low-income patients.

PubMed

Cantor, Joel C; Chakravarty, Sujoy; Tong, Jian; Yedidia, Michael J; Lontok, Oliver; DeLia, Derek

2014-12-01

A small but growing number of states are turning to accountable care concepts to improve their Medicaid programs. In 2011 New Jersey enacted the Medicaid Accountable Care Organization (ACO) Demonstration Project to offer local provider coalitions the opportunity to share any savings they generate. Impetus came from initiatives in Camden that aim to reduce costs through improved care coordination among hospital high users and that have received considerable media attention and substantial federal and private grant support. Though broadly similar to Medicare and commercial ACOs, the New Jersey demonstration addresses the unique concerns faced by Medicaid populations. Using hospital all-payer billing data, we estimate savings from care improvement efforts among inpatient and emergency department high users in thirteen communities that are candidates for participation in the New Jersey demonstration. We also examine their characteristics to inform Medicaid accountable care strategies. We find substantial variation in the share of high-user hospital patients across the study communities and high rates of avoidable use and costs among these patients. The potential savings among Medicaid enrollees are considerable, particularly if Medicaid ACOs can develop ways to successfully address the high burden of chronic illness and behavioral health conditions prevalent in the prospective demonstration communities. Copyright © 2014 by Duke University Press.

An energy saving mechanism of EPON networks for real time video transmission

NASA Astrophysics Data System (ADS)

Liu, Chien-Ping; Wu, Ho-Ting; Chiang, Yun-Ting; Chien, Shieh-Chieh; Ke, Kai-Wei

2015-07-01

Modern access networks are constructed widely by passive optical networks (PONs) to meet the growing bandwidth demand. However, higher bandwidth means more energy consumption. To save energy, a few research works propose the dual-mode energy saving mechanism that allows the ONU to operate between active and sleep modes periodically. However, such dual-mode energy saving design may induce unnecessary power consumption or packet delay increase in the case where only downstream data exist for most of the time. In this paper, we propose a new tri-mode energy saving scheme for Ethernet PON (EPON). The new tri-mode energy saving design, combining the dual-mode saving mechanism with the doze mode, allows the ONU to switch among these three modes alternatively. In the doze mode, the ONU may receive downstream data while keeping its transmitter close. Such scenario is often observed for real time video downstream transmission. Furthermore, the low packet delay of high priority upstream data can be attained through the use of early wake-up mechanism employed in both energy saving modes. The energy saving and system efficiency can thus be achieved jointly while maintaining the differentiated QoS for data with various priorities. Performance results via simulation have demonstrated the effectiveness of such mechanism.

Reinforcement Learning and Savings Behavior.

PubMed

Choi, James J; Laibson, David; Madrian, Brigitte C; Metrick, Andrew

2009-12-01

We show that individual investors over-extrapolate from their personal experience when making savings decisions. Investors who experience particularly rewarding outcomes from saving in their 401(k)-a high average and/or low variance return-increase their 401(k) savings rate more than investors who have less rewarding experiences with saving. This finding is not driven by aggregate time-series shocks, income effects, rational learning about investing skill, investor fixed effects, or time-varying investor-level heterogeneity that is correlated with portfolio allocations to stock, bond, and cash asset classes. We discuss implications for the equity premium puzzle and interventions aimed at improving household financial outcomes.

Modeling the cost-effectiveness of insect rearing on artificial diets: A test with a tephritid fly used in the sterile insect technique.

PubMed

Pascacio-Villafán, Carlos; Birke, Andrea; Williams, Trevor; Aluja, Martín

2017-01-01

We modeled the cost-effectiveness of rearing Anastrepha ludens, a major fruit fly pest currently mass reared for sterilization and release in pest control programs implementing the sterile insect technique (SIT). An optimization model was generated by combining response surface models of artificial diet cost savings with models of A. ludens pupation, pupal weight, larval development time and adult emergence as a function of mixtures of yeast, a costly ingredient, with corn flour and corncob fractions in the diet. Our model revealed several yeast-reduced mixtures that could be used to prepare diets that were considerably cheaper than a standard diet used for mass rearing. Models predicted a similar production of insects (pupation and adult emergence), with statistically similar pupal weights and larval development times between yeast-reduced diets and the standard mass rearing diet formulation. Annual savings from using the modified diets could be up to 5.9% of the annual cost of yeast, corn flour and corncob fractions used in the standard diet, representing a potential saving of US $27.45 per ton of diet (US $47,496 in the case of the mean annual production of 1,730.29 tons of artificial diet in the Moscafrut mass rearing facility at Metapa, Chiapas, Mexico). Implementation of the yeast-reduced diet on an experimental scale at mass rearing facilities is still required to confirm the suitability of new mixtures of artificial diet for rearing A. ludens for use in SIT. This should include the examination of critical quality control parameters of flies such as adult flight ability, starvation resistance and male sexual competitiveness across various generations. The method used here could be useful for improving the cost-effectiveness of invertebrate or vertebrate mass rearing diets worldwide.

Modeling the cost-effectiveness of insect rearing on artificial diets: A test with a tephritid fly used in the sterile insect technique

PubMed Central

Birke, Andrea; Williams, Trevor; Aluja, Martín

2017-01-01

We modeled the cost-effectiveness of rearing Anastrepha ludens, a major fruit fly pest currently mass reared for sterilization and release in pest control programs implementing the sterile insect technique (SIT). An optimization model was generated by combining response surface models of artificial diet cost savings with models of A. ludens pupation, pupal weight, larval development time and adult emergence as a function of mixtures of yeast, a costly ingredient, with corn flour and corncob fractions in the diet. Our model revealed several yeast-reduced mixtures that could be used to prepare diets that were considerably cheaper than a standard diet used for mass rearing. Models predicted a similar production of insects (pupation and adult emergence), with statistically similar pupal weights and larval development times between yeast-reduced diets and the standard mass rearing diet formulation. Annual savings from using the modified diets could be up to 5.9% of the annual cost of yeast, corn flour and corncob fractions used in the standard diet, representing a potential saving of US $27.45 per ton of diet (US $47,496 in the case of the mean annual production of 1,730.29 tons of artificial diet in the Moscafrut mass rearing facility at Metapa, Chiapas, Mexico). Implementation of the yeast-reduced diet on an experimental scale at mass rearing facilities is still required to confirm the suitability of new mixtures of artificial diet for rearing A. ludens for use in SIT. This should include the examination of critical quality control parameters of flies such as adult flight ability, starvation resistance and male sexual competitiveness across various generations. The method used here could be useful for improving the cost-effectiveness of invertebrate or vertebrate mass rearing diets worldwide. PMID:28257496

Evaluation of an automatic segmentation algorithm for definition of head and neck organs at risk.

PubMed

Thomson, David; Boylan, Chris; Liptrot, Tom; Aitkenhead, Adam; Lee, Lip; Yap, Beng; Sykes, Andrew; Rowbottom, Carl; Slevin, Nicholas

2014-08-03

The accurate definition of organs at risk (OARs) is required to fully exploit the benefits of intensity-modulated radiotherapy (IMRT) for head and neck cancer. However, manual delineation is time-consuming and there is considerable inter-observer variability. This is pertinent as function-sparing and adaptive IMRT have increased the number and frequency of delineation of OARs. We evaluated accuracy and potential time-saving of Smart Probabilistic Image Contouring Engine (SPICE) automatic segmentation to define OARs for salivary-, swallowing- and cochlea-sparing IMRT. Five clinicians recorded the time to delineate five organs at risk (parotid glands, submandibular glands, larynx, pharyngeal constrictor muscles and cochleae) for each of 10 CT scans. SPICE was then used to define these structures. The acceptability of SPICE contours was initially determined by visual inspection and the total time to modify them recorded per scan. The Simultaneous Truth and Performance Level Estimation (STAPLE) algorithm created a reference standard from all clinician contours. Clinician, SPICE and modified contours were compared against STAPLE by the Dice similarity coefficient (DSC) and mean/maximum distance to agreement (DTA). For all investigated structures, SPICE contours were less accurate than manual contours. However, for parotid/submandibular glands they were acceptable (median DSC: 0.79/0.80; mean, maximum DTA: 1.5 mm, 14.8 mm/0.6 mm, 5.7 mm). Modified SPICE contours were also less accurate than manual contours. The utilisation of SPICE did not result in time-saving/improve efficiency. Improvements in accuracy of automatic segmentation for head and neck OARs would be worthwhile and are required before its routine clinical implementation.

Whole exome sequencing in neurogenetic odysseys: An effective, cost- and time-saving diagnostic approach.

PubMed

Córdoba, Marta; Rodriguez-Quiroga, Sergio Alejandro; Vega, Patricia Analía; Salinas, Valeria; Perez-Maturo, Josefina; Amartino, Hernán; Vásquez-Dusefante, Cecilia; Medina, Nancy; González-Morón, Dolores; Kauffman, Marcelo Andrés

2018-01-01

Diagnostic trajectories for neurogenetic disorders frequently require the use of considerable time and resources, exposing patients and families to so-called "diagnostic odysseys". Previous studies have provided strong evidence for increased diagnostic and clinical utility of whole-exome sequencing in medical genetics. However, specific reports assessing its utility in a setting such as ours- a neurogeneticist led academic group serving in a low-income country-are rare. To assess the diagnostic yield of WES in patients suspected of having a neurogenetic condition and explore the cost-effectiveness of its implementation in a research group located in an Argentinean public hospital. This is a prospective study of the clinical utility of WES in a series of 40 consecutive patients selected from a Neurogenetic Clinic of a tertiary Hospital in Argentina. We evaluated patients retrospectively for previous diagnostic trajectories. Diagnostic yield, clinical impact on management and economic diagnostic burden were evaluated. We demonstrated the clinical utility of Whole Exome Sequencing in our patient cohort, obtaining a diagnostic yield of 40% (95% CI, 24.8%-55.2%) among a diverse group of neurological disorders. The average age at the time of WES was 23 (range 3-70). The mean time elapsed from symptom onset to WES was 11 years (range 3-42). The mean cost of the diagnostic workup prior to WES was USD 1646 (USD 1439 to 1853), which is 60% higher than WES cost in our center. WES for neurogenetics proved to be an effective, cost- and time-saving approach for the molecular diagnosis of this heterogeneous and complex group of patients.

48 CFR 48.101 - General.

Code of Federal Regulations, 2013 CFR

2013-10-01

... engineering effort is applied to areas of the contract that offer opportunities for considerable savings... ENGINEERING Policies and Procedures 48.101 General. (a) Value engineering is the formal technique by which... performing more economically. Value engineering attempts to eliminate, without impairing essential functions...

48 CFR 48.101 - General.

Code of Federal Regulations, 2014 CFR

2014-10-01

... engineering effort is applied to areas of the contract that offer opportunities for considerable savings... ENGINEERING Policies and Procedures 48.101 General. (a) Value engineering is the formal technique by which... performing more economically. Value engineering attempts to eliminate, without impairing essential functions...

48 CFR 48.101 - General.

Code of Federal Regulations, 2012 CFR

2012-10-01

... engineering effort is applied to areas of the contract that offer opportunities for considerable savings... ENGINEERING Policies and Procedures 48.101 General. (a) Value engineering is the formal technique by which... performing more economically. Value engineering attempts to eliminate, without impairing essential functions...

Energy Savings Lifetimes and Persistence

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoffman, Ian M.; Schiller, Steven R.; Todd, Annika

2016-02-01

This technical brief explains the concepts of energy savings lifetimes and savings persistence and discusses how program administrators use these factors to calculate savings for efficiency measures, programs and portfolios. Savings lifetime is the length of time that one or more energy efficiency measures or activities save energy, and savings persistence is the change in savings throughout the functional life of a given efficiency measure or activity. Savings lifetimes are essential for assessing the lifecycle benefits and cost effectiveness of efficiency activities and for forecasting loads in resource planning. The brief also provides estimates of savings lifetimes derived from amore » national collection of costs and savings for electric efficiency programs and portfolios.« less

Operating Room Time Savings with the Use of Splint Packs: A Randomized Controlled Trial

PubMed Central

Gonzalez, Tyler A.; Bluman, Eric M.; Palms, David; Smith, Jeremy T.; Chiodo, Christopher P.

2016-01-01

Background: The most expensive variable in the operating room (OR) is time. Lean Process Management is being used in the medical field to improve efficiency in the OR. Streamlining individual processes within the OR is crucial to a comprehensive time saving and cost-cutting health care strategy. At our institution, one hour of OR time costs approximately $500, exclusive of supply and personnel costs. Commercially prepared splint packs (SP) contain all components necessary for plaster-of-Paris short-leg splint application and have the potential to decrease splint application time and overall costs by making it a more lean process. We conducted a randomized controlled trial comparing OR time savings between SP use and bulk supply (BS) splint application. Methods: Fifty consecutive adult operative patients on whom post-operative short-leg splint immobilization was indicated were randomized to either a control group using BS or an experimental group using SP. One orthopaedic surgeon (EMB) prepared and applied all of the splints in a standardized fashion. Retrieval time, preparation time, splint application time, and total splinting time for both groups were measured and statistically analyzed. Results: The retrieval time, preparation time and total splinting time were significantly less (p<0.001) in the SP group compared with the BS group. There was no significant difference in application time between the SP group and BS group. Conclusion: The use of SP made the process of splinting more lean. This has resulted in an average of 2 minutes 52 seconds saved in total splinting time compared to BS, making it an effective cost-cutting and time saving technique. For high volume ORs, use of splint packs may contribute to substantial time and cost savings without impacting patient safety. PMID:26894212

[Influenza vaccination in the elderly population in Mexico: economic considerations].

PubMed

Gutiérrez, Juan Pablo; Bertozzi, Stefano M

2005-01-01

To estimate costs and health outcomes that could be attained by an influenza vaccination program in adults 65 years of age and older in Mexico. Between June and October 2004, a model was constructed to estimate the number of life years lost due to influenza and the fraction that could be prevented by vaccination among adults 65 years of age and older. The model also allowed the estimation of the net cost of a vaccination program, including both the cost of delivering the vaccine and savings from prevented infections and their treatment costs. Using two scenarios of vaccine effectiveness, between 7 454 and 11 169 life years could saved by the vaccine if given to all adults 65 years and older in Mexico, with a net cost per life year saved between 13 301 and 21 037 Mexican pesos (about dollar 1 210 and dollar 1 910 US dollars). Influenza vaccination among the elderly in Mexico would result in savings per life year saved well below the Mexican gross domestic product (GDP) per capita, suggesting, even without examining alternative uses for these resources, that this is a cost effective intervention in Mexico and probably also in other middle-income developing countries.

31 CFR 315.10 - Limitations.

Code of Federal Regulations, 2013 CFR

2013-07-01

... each series of bonds and savings notes for each specific year, which has varied from time to time, can..., DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT REGULATIONS GOVERNING U.S. SAVINGS BONDS, SERIES A, B, C.... Specific limitations have been placed on the amounts of bonds of each series and savings notes that might...

31 CFR 315.10 - Limitations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... each series of bonds and savings notes for each specific year, which has varied from time to time, can..., DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT REGULATIONS GOVERNING U.S. SAVINGS BONDS, SERIES A, B, C.... Specific limitations have been placed on the amounts of bonds of each series and savings notes that might...

31 CFR 315.10 - Limitations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... each series of bonds and savings notes for each specific year, which has varied from time to time, can..., DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT REGULATIONS GOVERNING U.S. SAVINGS BONDS, SERIES A, B, C.... Specific limitations have been placed on the amounts of bonds of each series and savings notes that might...

31 CFR 315.10 - Limitations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... each series of bonds and savings notes for each specific year, which has varied from time to time, can..., DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT REGULATIONS GOVERNING U.S. SAVINGS BONDS, SERIES A, B, C.... Specific limitations have been placed on the amounts of bonds of each series and savings notes that might...

31 CFR 321.27 - Supplements, amendments, or revisions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... FINANCIAL INSTITUTIONS OF UNITED STATES SAVINGS BONDS AND UNITED STATES SAVINGS NOTES (FREEDOM SHARES... any time or from time to time, revise, supplement, amend or withdraw, in whole or in part, the...

Reinforcement Learning and Savings Behavior*

PubMed Central

Choi, James J.; Laibson, David; Madrian, Brigitte C.; Metrick, Andrew

2009-01-01

We show that individual investors over-extrapolate from their personal experience when making savings decisions. Investors who experience particularly rewarding outcomes from saving in their 401(k)—a high average and/or low variance return—increase their 401(k) savings rate more than investors who have less rewarding experiences with saving. This finding is not driven by aggregate time-series shocks, income effects, rational learning about investing skill, investor fixed effects, or time-varying investor-level heterogeneity that is correlated with portfolio allocations to stock, bond, and cash asset classes. We discuss implications for the equity premium puzzle and interventions aimed at improving household financial outcomes. PMID:20352013

Saving in cycles: how to get people to save more money.

PubMed

Tam, Leona; Dholakia, Utpal

2014-02-01

Low personal savings rates are an important social issue in the United States. We propose and test one particular method to get people to save more money that is based on the cyclical time orientation. In contrast to conventional, popular methods that encourage individuals to ignore past mistakes, focus on the future, and set goals to save money, our proposed method frames the savings task in cyclical terms, emphasizing the present. Across the studies, individuals who used our proposed cyclical savings method, compared with individuals who used a linear savings method, provided an average of 74% higher savings estimates and saved an average of 78% more money. We also found that the cyclical savings method was more efficacious because it increased implementation planning and lowered future optimism regarding saving money.

31 CFR 351.6 - When may I redeem my Series EE savings bond?

Code of Federal Regulations, 2012 CFR

2012-07-01

... before January 1, 2003. You may redeem your Series EE savings bond at any time beginning six months after... 31 Money and Finance:Treasury 2 2012-07-01 2012-07-01 false When may I redeem my Series EE savings... SAVINGS BONDS, SERIES EE Maturities, Redemption Values, and Investment Yields of Series EE Savings Bonds...

31 CFR 351.6 - When may I redeem my Series EE savings bond?

Code of Federal Regulations, 2013 CFR

2013-07-01

... before January 1, 2003. You may redeem your Series EE savings bond at any time beginning six months after... 31 Money and Finance:Treasury 2 2013-07-01 2013-07-01 false When may I redeem my Series EE savings... SAVINGS BONDS, SERIES EE Maturities, Redemption Values, and Investment Yields of Series EE Savings Bonds...

31 CFR 351.6 - When may I redeem my Series EE savings bond?

Code of Federal Regulations, 2011 CFR

2011-07-01

... before January 1, 2003. You may redeem your Series EE savings bond at any time beginning six months after... 31 Money and Finance:Treasury 2 2011-07-01 2011-07-01 false When may I redeem my Series EE savings... SAVINGS BONDS, SERIES EE Maturities, Redemption Values, and Investment Yields of Series EE Savings Bonds...

Application of multi-function display and control technology

NASA Technical Reports Server (NTRS)

Spiger, R. J.; Farrell, R. J.; Holcomb, G. A.

1982-01-01

The NASA orbiter spacecraft incorporates a complex array of systems, displays, and controls. The incorporation of discrete dedicated controls into a multifunction display and control system (MFDCS) offers the potential for savings in weight, power, panel space, and crew training time. Technology identified as applicable to a MFDCS is applied to the orbiter orbital maneuvering system (OMS) and the electrical power distribution and control system (EPDCS) to derive concepts for a MFDCS design. Several concepts of varying degrees of performance and complexity are discussed and a suggested concept for further development is presented in greater detail. Both the hardware and software aspects and the human factors considerations of the designs are included.

Inspection of care: Findings from an innovative demonstration

PubMed Central

Morris, John N.; Sherwood, Clarence C.; Dreyer, Paul

1989-01-01

In this article, information is presented concerning the efficacy of a sample-based approach to completing inspection of care reviews of Medicaid-supported nursing home residents. Massachusetts nursing homes were randomly assigned to full (the control group) or sample (the experimental group) review conditions. The primary research focus was to determine whether the proportion of facilities found to be deficient (based on quality of care and level of care criteria) in the experimental sample was comparable to the proportion in the control sample. The findings supported such a hypothesis: Deficient facilities appear to be equally identifiable using the random or full-sampling protocols, and the process can be completed with a considerable savings of surveyor time. PMID:10313458

Impact of backwashing procedures on deep bed filtration productivity in drinking water treatment.

PubMed

Slavik, Irene; Jehmlich, Alexander; Uhl, Wolfgang

2013-10-15

Backwash procedures for deep bed filters were evaluated and compared by means of a new integrated approach based on productivity. For this, different backwash procedures were experimentally evaluated by using a pilot plant for direct filtration. A standard backwash mode as applied in practice served as a reference and effluent turbidity was used as the criterion for filter run termination. The backwash water volumes needed, duration of the filter-to-waste period, time out of operation, total volume discharged and filter run-time were determined and used to calculate average filtration velocity and average productivity. Results for filter run-times, filter backwash volumes, and filter-to-waste volumes showed considerable differences between the backwash procedures. Thus, backwash procedures with additional clear flushing phases were characterised by an increased need for backwash water. However, this additional water consumption could not be compensated by savings during filter ripening. Compared to the reference backwash procedure, filter run-times were longer for both single-media and dual-media filters when air scour and air/water flush were optimised with respect to flow rates and the proportion of air and water. This means that drinking water production time is longer and less water is needed for filter bed cleaning. Also, backwashing with additional clear flushing phases resulted in longer filter run-times before turbidity breakthrough. However, regarding the productivity of the filtration process, it was shown that it was almost the same for all of the backwash procedures investigated in this study. Due to this unexpected finding, the relationships between filter bed cleaning, filter ripening and filtration performance were considered and important conclusions and new approaches for process optimisation and resource savings were derived. Copyright © 2013 Elsevier Ltd. All rights reserved.

VA Telemedicine: An Analysis of Cost and Time Savings.

PubMed

Russo, Jack E; McCool, Ryan R; Davies, Louise

2016-03-01

The Veterans Affairs (VA) healthcare system provides beneficiary travel reimbursement ("travel pay") to qualifying patients for traveling to appointments. Travel pay is a large expense for the VA and hence the U.S. Government, projected to cost nearly $1 billion in 2015. Telemedicine in the VA system has the potential to save money by reducing patient travel and thus the amount of travel pay disbursed. In this study, we quantify this savings and also report trends in VA telemedicine volumes over time. All telemedicine visits based at the VA Hospital in White River Junction, VT between 2005 and 2013 were reviewed (5,695 visits). Travel distance and time saved as a result of telemedicine were calculated. Clinical volume in the mental health department, which has had the longest participation in telemedicine, was analyzed. Telemedicine resulted in an average travel savings of 145 miles and 142 min per visit. This led to an average travel payment savings of $18,555 per year. Telemedicine volume grew significantly over the study period such that by the final year the travel pay savings had increased to $63,804, or about 3.5% of the total travel pay disbursement for that year. The number of mental health telemedicine visits rose over the study period but remained small relative to the number of face-to-face visits. A higher proportion of telemedicine visits involved new patients. Telemedicine at the VA saves travel distance and time, although the reduction in travel payments remains modest at current telemedicine volumes.

New numerical method for radiation heat transfer in nonhomogeneous participating media

DOE Office of Scientific and Technical Information (OSTI.GOV)

Howell, J.R.; Tan, Zhiqiang

A new numerical method, which solves the exact integral equations of distance-angular integration form for radiation transfer, is introduced in this paper. By constructing and prestoring the numerical integral formulas for the distance integral for appropriate kernel functions, this method eliminates the time consuming evaluations of the kernels of the space integrals in the formal computations. In addition, when the number of elements in the system is large, the resulting coefficient matrix is quite sparse. Thus, either considerable time or much storage can be saved. A weakness of the method is discussed, and some remedies are suggested. As illustrations, somemore » one-dimensional and two-dimensional problems in both homogeneous and inhomogeneous emitting, absorbing, and linear anisotropic scattering media are studied. Some results are compared with available data. 13 refs.« less

Integrated control of emission reductions, energy-saving, and cost-benefit using a multi-objective optimization technique in the pulp and paper industry.

PubMed

Wen, Zongguo; Xu, Chang; Zhang, Xueying

2015-03-17

Reduction of water pollutant emissions and energy consumption is regarded as a key environmental objective for the pulp and paper industry. The paper develops a bottom-up model called the Industrial Water Pollutant Control and Technology Policy (IWPCTP) based on an industrial technology simulation system and multiconstraint technological optimization. Five policy scenarios covering the business as usual (BAU) scenario, the structural adjustment (SA) scenario, the cleaner technology promotion (CT) scenario, the end-treatment of pollutants (EOP) scenario, and the coupling measures (CM) scenario have been set to describe future policy measures related to the development of the pulp and paper industry from 2010-2020. The outcome of this study indicates that the energy saving amount under the CT scenario is the largest, while that under the SA scenario is the smallest. Under the CT scenario, savings by 2020 include 70 kt/year of chemical oxygen demand (COD) emission reductions and savings of 7443 kt of standard coal, 539.7 ton/year of ammonia nitrogen (NH4-N) emission reductions, and savings of 7444 kt of standard coal. Taking emission reductions, energy savings, and cost-benefit into consideration, cleaner technologies like highly efficient pulp washing, dry and wet feedstock preparation, and horizontal continuous cooking, medium and high consistency pulping and wood dry feedstock preparation are recommended.

Energy Efficiency Handbook for Driver's Education.

ERIC Educational Resources Information Center

Berlowitz, Dan; And Others

Presented are suggestions to help the automobile driver attain the saving of fuel and money. Discussed are starting and stopping; anticipation of traffic conditions; use of accessories; trip planning; and accomodation of pedestrians and cyclists. Additional topics covered include systematic car maintenance and safety considerations. (RE)

Considerations When Upgrading and Renovating Window Systems

ERIC Educational Resources Information Center

Gille, Steve

2010-01-01

Today's educational facilities managers face many challenges. As stewards of their campus' physical assets, these professionals are charged with improving students' learning environments, saving money, and maintaining the historical and aesthetic integrity of their buildings. For schools and universities that have not replaced their windows in…

The Base 32 Method: An Improved Method for Coding Sibling Constellations.

ERIC Educational Resources Information Center

Perfetti, Lawrence J. Carpenter

1990-01-01

Offers new sibling constellation coding method (Base 32) for genograms using binary and base 32 numbers that saves considerable microcomputer memory. Points out that new method will result in greater ability to store and analyze larger amounts of family data. (Author/CM)

Terrestrial adaptation of the thermal heliotrope.

NASA Technical Reports Server (NTRS)

Fairbanks, J. W.; Morse, F. H.

1971-01-01

The principle of using bimetal helical coils to cause solar arrays to track the sun in space is presently under consideration for array orientation on several spacecraft. Adaptation of this thermal heliotrope to terrestrial applications introduces additional design considerations. The dominance of solar-radiation energy input to the helical coil over convective energy losses has to be ensured, and wind effects must be minimized. As long as the cost of solar cells remains high, orientation will always result in a significant cost saving for the converter.

Autonomous Vehicles Require Socio-Political Acceptance—An Empirical and Philosophical Perspective on the Problem of Moral Decision Making

PubMed Central

Bergmann, Lasse T.; Schlicht, Larissa; Meixner, Carmen; König, Peter; Pipa, Gordon; Boshammer, Susanne; Stephan, Achim

2018-01-01

Autonomous vehicles, though having enormous potential, face a number of challenges. As a computer system interacting with society on a large scale and human beings in particular, they will encounter situations, which require moral assessment. What will count as right behavior in such situations depends on which factors are considered to be both morally justified and socially acceptable. In an empirical study we investigated what factors people recognize as relevant in driving situations. The study put subjects in several “dilemma” situations, which were designed to isolate different and potentially relevant factors. Subjects showed a surprisingly high willingness to sacrifice themselves to save others, took the age of potential victims in a crash into consideration and were willing to swerve onto a sidewalk if this saved more lives. The empirical insights are intended to provide a starting point for a discussion, ultimately yielding societal agreement whereby the empirical insights should be balanced with philosophical considerations. PMID:29541023

Autonomous Vehicles Require Socio-Political Acceptance-An Empirical and Philosophical Perspective on the Problem of Moral Decision Making.

PubMed

Bergmann, Lasse T; Schlicht, Larissa; Meixner, Carmen; König, Peter; Pipa, Gordon; Boshammer, Susanne; Stephan, Achim

2018-01-01

Autonomous vehicles, though having enormous potential, face a number of challenges. As a computer system interacting with society on a large scale and human beings in particular, they will encounter situations, which require moral assessment. What will count as right behavior in such situations depends on which factors are considered to be both morally justified and socially acceptable. In an empirical study we investigated what factors people recognize as relevant in driving situations. The study put subjects in several "dilemma" situations, which were designed to isolate different and potentially relevant factors. Subjects showed a surprisingly high willingness to sacrifice themselves to save others, took the age of potential victims in a crash into consideration and were willing to swerve onto a sidewalk if this saved more lives. The empirical insights are intended to provide a starting point for a discussion, ultimately yielding societal agreement whereby the empirical insights should be balanced with philosophical considerations.

The economic costs of routine INR monitoring in infants and children--examining point-of-care devices used within the home setting compared to traditional anticoagulation clinic monitoring.

PubMed

Gaw, James R; Crowley, Steven; Monagle, Paul; Jones, Sophie; Newall, Fiona

2013-07-01

The use of point-of-care (POC) devices within the home for routine INR monitoring has demonstrated reliability, safety and effectiveness in the management of infants and children requiring long-term warfarin therapy. However, a comprehensive cost-analysis of using this method of management, compared to attending anticoagulation clinics has not been reported. The aim of this study was to compare the estimated societal costs of attending anticoagulation clinics for routine INR monitoring to using a POC test in the home. This study used a comparative before-and-after design that included 60 infants and children managed via the Haematology department at a tertiary paediatric centre. Each participant was exposed to both modes of management at various times for a period of ≥3 months. A questionnaire, consisting of 25 questions was sent to families to complete and return. Data collected included: the frequency of monitoring, mode of travel to and from clinics, total time consumed, and primary carer's income level. The home monitoring cohort saved a total of 1 hour 19 minutes per INR test compared to attending anticoagulation clinics and had a cost saving to society of $66.83 (AUD) per INR test compared to traditional care; incorporating health sector costs, travel expenses and lost time. The traditional model of care requires a considerable investment of time per test from both child and carer. Home INR monitoring in infants and children provides greater societal economic benefits compared to traditional models. Copyright © 2013 Elsevier Ltd. All rights reserved.

Short-term versus long-term rainfall time series in the assessment of potable water savings by using rainwater in houses.

PubMed

Ghisi, Enedir; Cardoso, Karla Albino; Rupp, Ricardo Forgiarini

2012-06-15

The main objective of this article is to assess the possibility of using short-term instead of long-term rainfall time series to evaluate the potential for potable water savings by using rainwater in houses. The analysis was performed considering rainfall data from 1960 to 1995 for the city of Santa Bárbara do Oeste, located in the state of São Paulo, southeastern Brazil. The influence of the rainfall time series, roof area, potable water demand and percentage rainwater demand on the potential for potable water savings was evaluated. The potential for potable water savings was estimated using computer simulations considering a set of long-term rainfall time series and different sets of short-term rainfall time series. The ideal rainwater tank capacity was also assessed for some cases. It was observed that the higher the percentage rainwater demand and the shorter the rainfall time series, the larger the difference between the potential for potable water savings and the greater the variation in the ideal rainwater tank size. The sets of short-term rainfall time series considered adequate for different scenarios ranged from 1 to 13 years depending on the roof area, percentage rainwater demand and potable water demand. The main finding of the research is that sets of short-term rainfall time series can be used to assess the potential for potable water savings by using rainwater, as the results obtained are similar to those obtained from the long-term rainfall time series. Copyright © 2012 Elsevier Ltd. All rights reserved.

Leyla loop: a time-saving suture technique for robotic atrial closure

PubMed Central

Kılıç, Leyla; Şenay, Şahin; Ümit Güllü, A.; Alhan, Cem

2013-01-01

The longer durations of cardiopulmonary bypass and aortic cross-clamp times remain the disadvantages of robotic or minimally invasive cardiac surgery. For this reason, every small contribution to speeding up these procedures is of the utmost importance. Here, we present a practical, easy and time-saving suture technique for atrial closure. It consists of a hand-made loop at one end of the suture and saves the time otherwise consumed by knotting. It may also be used during conventional or minimally invasive cardiac surgery. PMID:23760357

Energy-efficient fault tolerance in multiprocessor real-time systems

NASA Astrophysics Data System (ADS)

Guo, Yifeng

The recent progress in the multiprocessor/multicore systems has important implications for real-time system design and operation. From vehicle navigation to space applications as well as industrial control systems, the trend is to deploy multiple processors in real-time systems: systems with 4 -- 8 processors are common, and it is expected that many-core systems with dozens of processing cores will be available in near future. For such systems, in addition to general temporal requirement common for all real-time systems, two additional operational objectives are seen as critical: energy efficiency and fault tolerance. An intriguing dimension of the problem is that energy efficiency and fault tolerance are typically conflicting objectives, due to the fact that tolerating faults (e.g., permanent/transient) often requires extra resources with high energy consumption potential. In this dissertation, various techniques for energy-efficient fault tolerance in multiprocessor real-time systems have been investigated. First, the Reliability-Aware Power Management (RAPM) framework, which can preserve the system reliability with respect to transient faults when Dynamic Voltage Scaling (DVS) is applied for energy savings, is extended to support parallel real-time applications with precedence constraints. Next, the traditional Standby-Sparing (SS) technique for dual processor systems, which takes both transient and permanent faults into consideration while saving energy, is generalized to support multiprocessor systems with arbitrary number of identical processors. Observing the inefficient usage of slack time in the SS technique, a Preference-Oriented Scheduling Framework is designed to address the problem where tasks are given preferences for being executed as soon as possible (ASAP) or as late as possible (ALAP). A preference-oriented earliest deadline (POED) scheduler is proposed and its application in multiprocessor systems for energy-efficient fault tolerance is investigated, where tasks' main copies are executed ASAP while backup copies ALAP to reduce the overlapped execution of main and backup copies of the same task and thus reduce energy consumption. All proposed techniques are evaluated through extensive simulations and compared with other state-of-the-art approaches. The simulation results confirm that the proposed schemes can preserve the system reliability while still achieving substantial energy savings. Finally, for both SS and POED based Energy-Efficient Fault-Tolerant (EEFT) schemes, a series of recovery strategies are designed when more than one (transient and permanent) faults need to be tolerated.

Energy Efficient Engine Program: Technology Benefit/Cost Study, Volume II

NASA Technical Reports Server (NTRS)

Gray, D. E.; Gardner, W. B.

1983-01-01

The Benefit/Cost Study portion of the NASA-sponsored Energy Efficient Engine Component Development and Integration program was successful in achieving its objectives: identification of air transport propulsion system technology requirements for the years 2000 and 2010, and formulation of programs for developing these technologies. It is projected that the advanced technologies identified, when developed to a state of readiness, will provide future commercial and military turbofan engines with significant savings in fuel consumption and related operating costs. These benefits are significant and far from exhausted. The potential savings translate into billions of dollars in annual savings for the airlines. Analyses indicate that a significant portion of the overall savings is attributed to aerodynamic and structure advancements. Another important consideration in acquiring these benefits is developing a viable reference technology base that will permit engines to operate at substantially higher overall pressure ratios and bypass ratios. Results have pointed the direction for future research and a comprehensive program plan for achieving this was formulated. The next major step is initiating the program effort that will convert the advanced technologies into the expected benefits.

Determining the Cost-Savings Threshold and Alignment Accuracy of Patient-Specific Instrumentation in Total Ankle Replacements.

PubMed

Hamid, Kamran S; Matson, Andrew P; Nwachukwu, Benedict U; Scott, Daniel J; Mather, Richard C; DeOrio, James K

2017-01-01

Traditional intraoperative referencing for total ankle replacements (TARs) involves multiple steps and fluoroscopic guidance to determine mechanical alignment. Recent adoption of patient-specific instrumentation (PSI) allows for referencing to be determined preoperatively, resulting in less steps and potentially decreased operative time. We hypothesized that usage of PSI would result in decreased operating room time that would offset the additional cost of PSI compared with standard referencing (SR). In addition, we aimed to compare postoperative radiographic alignment between PSI and SR. Between August 2014 and September 2015, 87 patients undergoing TAR were enrolled in a prospectively collected TAR database. Patients were divided into cohorts based on PSI vs SR, and operative times were reviewed. Radiographic alignment parameters were retrospectively measured at 6 weeks postoperatively. Time-driven activity-based costing (TDABC) was used to derive direct costs. Cost vs operative time-savings were examined via 2-way sensitivity analysis to determine cost-saving thresholds for PSI applicable to a range of institution types. Cost-saving thresholds defined the price of PSI below which PSI would be cost-saving. A total of 35 PSI and 52 SR cases were evaluated with no significant differences identified in patient characteristics. Operative time from incision to completion of casting in cases without adjunct procedures was 127 minutes with PSI and 161 minutes with SR ( P < .05). PSI demonstrated similar postoperative accuracy to SR in coronal tibial-plafond alignment (1.1 vs 0.3 degrees varus, P = .06), tibial-plafond alignment (0.3 ± 2.1 vs 1.1 ± 2.1 degrees varus, P = .06), and tibial component sagittal alignment (0.7 vs 0.9 degrees plantarflexion, P = .14). The TDABC method estimated a PSI cost-savings threshold range at our institution of $863 below which PSI pricing would provide net cost-savings. Two-way sensitivity analysis generated a globally applicable cost-savings threshold model based on institution-specific costs and surgeon-specific time-savings. This study demonstrated equivalent postoperative TAR alignment with PSI and SR referencing systems but with a significant decrease in operative time with PSI. Based on TDABC and associated sensitivity analysis, a cost-savings threshold of $863 was identified for PSI pricing at our institution below which PSI was less costly than SR. Similar internal cost accounting may benefit health care systems for identifying cost drivers and obtaining leverage during price negotiations. Level III, therapeutic study.

I-SAVE: AN INTERACTIVE REAL-TIME MONITOR AND CONTROLLER TO INFLUENCE ENERGY CONSERVATION BEHAVIOR BY IMPULSE SAVING

EPA Science Inventory

Simulation-based model to explore the benefits of monitoring and control to energy saving opportunities in residential homes; an adaptive algorithm to predict the type of electrical loads; a prototype user friendly interface monitoring and control device to save energy; a p...

Enhanced identification of eligibility for depression research using an electronic medical record search engine.

PubMed

Seyfried, Lisa; Hanauer, David A; Nease, Donald; Albeiruti, Rashad; Kavanagh, Janet; Kales, Helen C

2009-12-01

Electronic medical records (EMRs) have become part of daily practice for many physicians. Attempts have been made to apply electronic search engine technology to speed EMR review. This was a prospective, observational study to compare the speed and clinical accuracy of a medical record search engine vs. manual review of the EMR. Three raters reviewed 49 cases in the EMR to screen for eligibility in a depression study using the electronic medical record search engine (EMERSE). One week later raters received a scrambled set of the same patients including 9 distractor cases, and used manual EMR review to determine eligibility. For both methods, accuracy was assessed for the original 49 cases by comparison with a gold standard rater. Use of EMERSE resulted in considerable time savings; chart reviews using EMERSE were significantly faster than traditional manual review (p=0.03). The percent agreement of raters with the gold standard (e.g. concurrent validity) using either EMERSE or manual review was not significantly different. Using a search engine optimized for finding clinical information in the free-text sections of the EMR can provide significant time savings while preserving clinical accuracy. The major power of this search engine is not from a more advanced and sophisticated search algorithm, but rather from a user interface designed explicitly to help users search the entire medical record in a way that protects health information.

Enhanced Identification of Eligibility for Depression Research Using an Electronic Medical Record Search Engine

PubMed Central

Seyfried, Lisa; Hanauer, David; Nease, Donald; Albeiruti, Rashad; Kavanagh, Janet; Kales, Helen C.

2009-01-01

Purpose Electronic medical records (EMR) have become part of daily practice for many physicians. Attempts have been made to apply electronic search engine technology to speed EMR review. This was a prospective, observational study to compare the speed and accuracy of electronic search engine vs. manual review of the EMR. Methods Three raters reviewed 49 cases in the EMR to screen for eligibility in a depression study using the electronic search engine (EMERSE). One week later raters received a scrambled set of the same patients including 9 distractor cases, and used manual EMR review to determine eligibility. For both methods, accuracy was assessed for the original 49 cases by comparison with a gold standard rater. Results Use of EMERSE resulted in considerable time savings; chart reviews using EMERSE were significantly faster than traditional manual review (p=0.03). The percent agreement of raters with the gold standard (e.g. concurrent validity) using either EMERSE or manual review was not significantly different. Conclusions Using a search engine optimized for finding clinical information in the free-text sections of the EMR can provide significant time savings while preserving reliability. The major power of this search engine is not from a more advanced and sophisticated search algorithm, but rather from a user interface designed explicitly to help users search the entire medical record in a way that protects health information. PMID:19560962

Solar Heating Considerations for Green Schools

ERIC Educational Resources Information Center

Kelley, Brian; Fiedler, Lon

2012-01-01

As energy costs continue to rise, many schools and universities are considering energy-saving solutions, including solar heating options, to lower costs and to attract students and staff that support environmentally friendly practices. However, administrators and facility engineers should take several issues into account before pursuing a solar…

Occupancy Fire Record: Schools.

ERIC Educational Resources Information Center

National Fire Protection Association, Boston, MA.

The considerations of human safety and preservation of facilities are examined in relation to school fires. Various aspects of planning which would decrease the probability of fires and thereby save life and property are reviewed and include--(1) causes, (2) automatic protection devices, (3) evacuation and fire drills, and (4) construction…

Interpreting cost of ownership for mix-and-match lithography

NASA Astrophysics Data System (ADS)

Levine, Alan L.; Bergendahl, Albert S.

1994-05-01

Cost of ownership modeling is a critical and emerging tool that provides significant insight into the ways to optimize device manufacturing costs. The development of a model to deal with a particular application, mix-and-match lithography, was performed in order to determine the level of cost savings and the optimum ways to create these savings. The use of sensitivity analysis with cost of ownership allows the user to make accurate trade-offs between technology and cost. The use and interpretation of the model results are described in this paper. Parameters analyzed include several manufacturing considerations -- depreciation, maintenance, engineering and operator labor, floorspace, resist, consumables and reticles. Inherent in this study is the ability to customize this analysis for a particular operating environment. Results demonstrate the clear advantages of a mix-and-match approach for three different operating environments. These case studies also demonstrate various methods to efficiently optimize cost savings strategies.

Improving value of travel time savings estimation for more effective transportation project evaluation.

DOT National Transportation Integrated Search

2012-12-01

Estimates of value of time (VOT) and value of travel time savings (VTTS) are critical elements in benefitcost : analyses of transportation projects and in developing congestion pricing policies. In addition, : differences in VTTS among various modes ...

Whole exome sequencing in neurogenetic odysseys: An effective, cost- and time-saving diagnostic approach

PubMed Central

Córdoba, Marta; Rodriguez-Quiroga, Sergio Alejandro; Vega, Patricia Analía; Salinas, Valeria; Perez-Maturo, Josefina; Amartino, Hernán; Vásquez-Dusefante, Cecilia; Medina, Nancy; González-Morón, Dolores; Kauffman, Marcelo Andrés

2018-01-01

Background Diagnostic trajectories for neurogenetic disorders frequently require the use of considerable time and resources, exposing patients and families to so-called “diagnostic odysseys”. Previous studies have provided strong evidence for increased diagnostic and clinical utility of whole-exome sequencing in medical genetics. However, specific reports assessing its utility in a setting such as ours- a neurogeneticist led academic group serving in a low-income country—are rare. Objectives To assess the diagnostic yield of WES in patients suspected of having a neurogenetic condition and explore the cost-effectiveness of its implementation in a research group located in an Argentinean public hospital. Methods This is a prospective study of the clinical utility of WES in a series of 40 consecutive patients selected from a Neurogenetic Clinic of a tertiary Hospital in Argentina. We evaluated patients retrospectively for previous diagnostic trajectories. Diagnostic yield, clinical impact on management and economic diagnostic burden were evaluated. Results We demonstrated the clinical utility of Whole Exome Sequencing in our patient cohort, obtaining a diagnostic yield of 40% (95% CI, 24.8%-55.2%) among a diverse group of neurological disorders. The average age at the time of WES was 23 (range 3–70). The mean time elapsed from symptom onset to WES was 11 years (range 3–42). The mean cost of the diagnostic workup prior to WES was USD 1646 (USD 1439 to 1853), which is 60% higher than WES cost in our center. Conclusions WES for neurogenetics proved to be an effective, cost- and time-saving approach for the molecular diagnosis of this heterogeneous and complex group of patients. PMID:29389947

A Compendium of Energy Conservation: Success Stories 90

DOE R&D Accomplishments Database

1990-12-01

The Department of Energy's (DOE) Office of Conservation and Renewable Energy proudly presents this summary of some its most successful projects and activities. The projects included in this document have made significant contributions to improving energy efficiency and fuel flexibility in the United States. The energy savings that can be realized from these projects are considerable. Americans have shown an impressive ability to reduce energy consumption since 1973. Studies show that 34 quadrillion Btus (quads) of energy were saved in 1988 alone as a result of energy conservation and other factors. These savings, worth approximately $180 billion, represent more energy than the United States obtains from any other single source. The availability of new, energy-efficient technologies has been an important ingredient in achieving these savings. Federal efforts to develop and commercialize energy-saving technologies and processes are a part of the reason for this progress. Over the past 10 years, DOE has carefully invested more than $2 billion in hundreds of research and development (R&D) projects to ensure the availability of advanced technology in the marketplace. These energy-efficient projects are carried out through DOE's Office of Conservation and Renewable Energy and reflect opportunities in the three energy-consuming, end-use sectors of the economy: buildings, transportation, and industry.

Application of automated measurement and verification to utility energy efficiency program data

DOE PAGES

Granderson, Jessica; Touzani, Samir; Fernandes, Samuel; ...

2017-02-17

Trustworthy savings calculations are critical to convincing regulators of both the cost-effectiveness of energy efficiency program investments and their ability to defer supply-side capital investments. Today’s methods for measurement and verification (M&V) of energy savings constitute a significant portion of the total costs of energy efficiency programs. They also require time-consuming data acquisition. A spectrum of savings calculation approaches is used, with some relying more heavily on measured data and others relying more heavily on estimated, modeled, or stipulated data. The increasing availability of “smart” meters and devices that report near-real time data, combined with new analytical approaches to quantifymore » savings, offers the potential to conduct M&V more quickly and at lower cost, with comparable or improved accuracy. Commercial energy management and information systems (EMIS) technologies are beginning to offer these ‘M&V 2.0’ capabilities, and program administrators want to understand how they might assist programs in quickly and accurately measuring energy savings. This paper presents the results of recent testing of the ability to use automation to streamline the M&V process. In this paper, we apply an automated whole-building M&V tool to historic data sets from energy efficiency programs to begin to explore the accuracy, cost, and time trade-offs between more traditional M&V, and these emerging streamlined methods that use high-resolution energy data and automated computational intelligence. For the data sets studied we evaluate the fraction of buildings that are well suited to automated baseline characterization, the uncertainty in gross savings that is due to M&V 2.0 tools’ model error, and indications of labor time savings, and how the automated savings results compare to prior, traditionally determined savings results. The results show that 70% of the buildings were well suited to the automated approach. In a majority of the cases (80%) savings and uncertainties for each individual building were quantified to levels above the criteria in ASHRAE Guideline 14. In addition the findings suggest that M&V 2.0 methods may also offer time-savings relative to traditional approaches. Lastly, we discuss the implications of these findings relative to the potential evolution of M&V, and pilots currently being launched to test how M&V automation can be integrated into ratepayer-funded programs and professional implementation and evaluation practice.« less

Application of automated measurement and verification to utility energy efficiency program data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Granderson, Jessica; Touzani, Samir; Fernandes, Samuel

Trustworthy savings calculations are critical to convincing regulators of both the cost-effectiveness of energy efficiency program investments and their ability to defer supply-side capital investments. Today’s methods for measurement and verification (M&V) of energy savings constitute a significant portion of the total costs of energy efficiency programs. They also require time-consuming data acquisition. A spectrum of savings calculation approaches is used, with some relying more heavily on measured data and others relying more heavily on estimated, modeled, or stipulated data. The increasing availability of “smart” meters and devices that report near-real time data, combined with new analytical approaches to quantifymore » savings, offers the potential to conduct M&V more quickly and at lower cost, with comparable or improved accuracy. Commercial energy management and information systems (EMIS) technologies are beginning to offer these ‘M&V 2.0’ capabilities, and program administrators want to understand how they might assist programs in quickly and accurately measuring energy savings. This paper presents the results of recent testing of the ability to use automation to streamline the M&V process. In this paper, we apply an automated whole-building M&V tool to historic data sets from energy efficiency programs to begin to explore the accuracy, cost, and time trade-offs between more traditional M&V, and these emerging streamlined methods that use high-resolution energy data and automated computational intelligence. For the data sets studied we evaluate the fraction of buildings that are well suited to automated baseline characterization, the uncertainty in gross savings that is due to M&V 2.0 tools’ model error, and indications of labor time savings, and how the automated savings results compare to prior, traditionally determined savings results. The results show that 70% of the buildings were well suited to the automated approach. In a majority of the cases (80%) savings and uncertainties for each individual building were quantified to levels above the criteria in ASHRAE Guideline 14. In addition the findings suggest that M&V 2.0 methods may also offer time-savings relative to traditional approaches. Lastly, we discuss the implications of these findings relative to the potential evolution of M&V, and pilots currently being launched to test how M&V automation can be integrated into ratepayer-funded programs and professional implementation and evaluation practice.« less

Expressing the sense of the House of Representatives that the Congress should not pass any legislation that would tax or confiscate personal savings accounts, including retirement accounts such as Individual Retirement Accounts (IRAs) and 401k plans, certificates of deposit (CDs), or other personal savings to provide financial relief for private businesses.

THOMAS, 113th Congress

Rep. Long, Billy [R-MO-7

2013-03-19

House - 03/19/2013 Referred to the Committee on Ways and Means, and in addition to the Committee on Financial Services, for a period to be subsequently determined by the Speaker, in each case for consideration of such provisions as fall within the jurisdiction of the committee... (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Water use and time analysis in ablution from taps

NASA Astrophysics Data System (ADS)

Zaied, Roubi A.

2017-09-01

There is a lack of water resources and an extreme use of potable water in our Arab region. Ablution from taps was studied since it is a repeated daily activity that consumes more water. Five different tap types are investigated for water consumption fashions including traditional mixing tap and automatic tap. Analyzing 100 experimental observations revealed that 22.7-28.8 % of ablution water is used for washing of feet and the largest water waste occurs during washing of face portions. Moreover, 30-47 % amount of water consumed in ablution from taps is wasted which can be saved if tap releases water only at moments of need. The push-type tap is being spread recently especially in airports. If it is intended for use in ablution facilities, batch duration and volume must be tuned. When each batch is 0.25 L of water and lasts for 3 s, 3 L are sufficient for one complete ablution in average which means considerable saving. A cost-benefit model is proposed for using different tap types and an economic feasibility study is performed on a case study. This analysis can help us to design better ablution systems.

Study and Implementation of White Power-LED Based Indoor Lighting Application for the Healthcare Sector

NASA Astrophysics Data System (ADS)

Chakraborty, A.; Ganguly, R.

With the current technological growth in the field of device fabrication, white power-LED's are available for solid state lighting applications. This is a paradigm shift from electrical lighting to electronic lighting. The implemented systems are showing some promise by saving a considerable amount of energy as well as providing a good and acceptable illumination level. However, the `useful life' of such devices is an important parameter. If the proper device is not chosen, the desired reliability and performance will not be obtained. In the present work, different parameters associated with reliability of such LED's are studied. Four different varieties of LED's are put to test the `useful life' as per IESNA LM 79 standard. From the results obtained, the proper LED is chosen for further application. Subsequently, lighting design is done for a hospital waiting room (indoor application) with 24 × 7 lighting requirements for replacement of existing CFLs there. The calculations show that although the initial cost is higher for LED based lighting, yet the savings on energy and replacement of the lamp results in a payback time of less than a year.

Field Assessment of Energy Audit Tools for Retrofit Programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Edwards, J.; Bohac, D.; Nelson, C.

2013-07-01

This project focused on the use of home energy ratings as a tool to promote energy retrofits in existing homes. A home energy rating provides a quantitative appraisal of a home's asset performance, usually compared to a benchmark such as the average energy use of similar homes in the same region. Home rating systems can help motivate homeowners in several ways. Ratings can clearly communicate a home's achievable energy efficiency potential, provide a quantitative assessment of energy savings after retrofits are completed, and show homeowners how they rate compared to their neighbors, thus creating an incentive to conform to amore » social standard. An important consideration is how rating tools for the retrofit market will integrate with existing home energy service programs. For residential programs that target energy savings only, home visits should be focused on key efficiency measures for that home. In order to gain wide adoption, a rating tool must be easily integrated into the field process, demonstrate consistency and reasonable accuracy to earn the trust of home energy technicians, and have a low monetary cost and time hurdle for homeowners. Along with the Home Energy Score, this project also evaluated the energy modeling performance of SIMPLE and REM/Rate.« less

Efficient Kill-Save Ratios Ease Up the Cognitive Demands on Counterintuitive Moral Utilitarianism.

PubMed

Trémolière, Bastien; Bonnefon, Jean-François

2014-07-01

The dual-process model of moral judgment postulates that utilitarian responses to moral dilemmas (e.g., accepting to kill one to save five) are demanding of cognitive resources. Here we show that utilitarian responses can become effortless, even when they involve to kill someone, as long as the kill-save ratio is efficient (e.g., 1 is killed to save 500). In Experiment 1, participants responded to moral dilemmas featuring different kill-save ratios under high or low cognitive load. In Experiments 2 and 3, participants responded at their own pace or under time pressure. Efficient kill-save ratios promoted utilitarian responding and neutered the effect of load or time pressure. We discuss whether this effect is more easily explained by a parallel-activation model or by a default-interventionist model. © 2014 by the Society for Personality and Social Psychology, Inc.

31 CFR 351.6 - When may I redeem my Series EE savings bond?

Code of Federal Regulations, 2014 CFR

2014-07-01

... before January 1, 2003. You may redeem your Series EE savings bond at any time beginning six months after... 31 Money and Finance: Treasury 2 2014-07-01 2014-07-01 false When may I redeem my Series EE... SAVINGS BONDS, SERIES EE Maturities, Redemption Values, and Investment Yields of Series EE Savings Bonds...

31 CFR 351.6 - When may I redeem my Series EE savings bond?

Code of Federal Regulations, 2010 CFR

2010-07-01

... before January 1, 2003. You may redeem your Series EE savings bond at any time beginning six months after... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false When may I redeem my Series EE... SAVINGS BONDS, SERIES EE Maturities, Redemption Values, and Investment Yields of Series EE Savings Bonds...

47 CFR 73.99 - Presunrise service authorization (PSRA) and postsunset service authorization (PSSA).

Code of Federal Regulations, 2013 CFR

2013-10-01

... authorization. (c) Extended Daylight Saving Time Pre-Sunrise Authorizations: (1) Between the first Sunday in... presunrise operations during extended daylight saving time and shall issue conforming authorizations. These...

47 CFR 73.99 - Presunrise service authorization (PSRA) and postsunset service authorization (PSSA).

Code of Federal Regulations, 2011 CFR

2011-10-01

... authorization. (c) Extended Daylight Saving Time Pre-Sunrise Authorizations: (1) Between the first Sunday in... presunrise operations during extended daylight saving time and shall issue conforming authorizations. These...

MINISITE PREPARATION FOR REFORESTATION OF STRIP-MINED LANDS

EPA Science Inventory

The purpose of this work was to test the hypothesis that site preparation of a minisite (20x60 cm cylinder) would be effective in promoting seedling survival and growth and still save considerable cost compared to area-wide site preparation. Spoil within the cylinder was mixed wi...

The Complete Guide to Job Sharing.

ERIC Educational Resources Information Center

Hohn, Marcia D.

This booklet provides information on job sharing that resulted from the research and experience of the Merrimack Valley Job Sharing Project. An overview of the topic considers the need for job sharing, employer benefits, types of jobs shared, job division, benefits, employer costs and savings, financial considerations for job sharers, perspectives…

Systematic Experimental Designs For Mixed-species Plantings

Treesearch

Jeffery C. Goelz

2001-01-01

Systematic experimental designs provide splendid demonstration areas for scientists and land managers to observe the effects of a gradient of species composition. Systematic designs are based on large plots where species composition varies gradually. Systematic designs save considerable space and require many fewer seedlings than conventional mixture designs. One basic...

Feed Fish Effluent and Reel in Savings

ERIC Educational Resources Information Center

Wert, Frank S.; Henderson, Upton B.

1978-01-01

Discusses the ways in which aquaculture can be a cost-effective wastewater treatment alternative. Fifteen strategies were selected as being appropriate and technologically feasible wastewater treatment systems to compare for the size of community under consideration. Costs for each stage of each strategy were estimated and compared. (Author/MA)

College Savings Accounts 101. Policy Page. No. 08-325

ERIC Educational Resources Information Center

Center for Public Policy Priorities, 2008

2008-01-01

An educated and skilled workforce is critical to Texas' economic vitality and competitiveness. However, Texas' low educational attainment poses tremendous challenges for the future. Rising tuition and limited financial aid also present Texas families and students with considerable barriers in paying for college and postsecondary training. Without…

Benefits of Leapfrogging to Superefficiency and Low Global Warming Potential Refrigerants in Room Air Conditioning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shah, Nihar; Wei, Max; Letschert, Virginie

2015-10-01

Hydrofluorocarbons (HFCs) emitted from uses such as refrigerants and thermal insulating foam, are now the fastest growing greenhouse gases (GHGs), with global warming potentials (GWP) thousands of times higher than carbon dioxide (CO2). Because of the short lifetime of these molecules in the atmosphere, mitigating the amount of these short-lived climate pollutants (SLCPs) provides a faster path to climate change mitigation than control of CO2 alone. This has led to proposals from Africa, Europe, India, Island States, and North America to amend the Montreal Protocol on Substances that Deplete the Ozone Layer (Montreal Protocol) to phase-down high-GWP HFCs. Simultaneously, energymore » efficiency market transformation programs such as standards, labeling and incentive programs are endeavoring to improve the energy efficiency for refrigeration and air conditioning equipment to provide life cycle cost, energy, GHG, and peak load savings. In this paper we provide an estimate of the magnitude of such GHG and peak electric load savings potential, for room air conditioning, if the refrigerant transition and energy efficiency improvement policies are implemented either separately or in parallel. We find that implementing HFC refrigerant transition and energy efficiency improvement policies in parallel for room air conditioning, roughly doubles the benefit of either policy implemented separately. We estimate that shifting the 2030 world stock of room air conditioners from the low efficiency technology using high-GWP refrigerants to higher efficiency technology and low-GWP refrigerants in parallel would save between 340-790 gigawatts (GW) of peak load globally, which is roughly equivalent to avoiding 680-1550 peak power plants of 500MW each. This would save 0.85 GT/year annually in China equivalent to over 8 Three Gorges dams and over 0.32 GT/year annually in India equivalent to roughly twice India’s 100GW solar mission target. While there is some uncertainty associated with emissions and growth projections, moving to efficient room air conditioning (~30% more efficient than current technology) in parallel with low-GWP refrigerants in room air conditioning could avoid up to ~25 billion tonnes of CO2 in 2030, ~33 billion in 2040, and ~40 billion in 2050, i.e. cumulative savings up to 98 billion tonnes of CO2 by 2050. Therefore, superefficient room ACs using low-GWP refrigerants merit serious consideration to maximize peak load reduction and GHG savings.« less

Cost savings of reduced constipation rates attributed to increased dietary fiber intakes: a decision-analytic model

PubMed Central

2014-01-01

Background Nearly five percent of Americans suffer from functional constipation, many of whom may benefit from increasing dietary fiber consumption. The annual constipation-related healthcare cost savings associated with increasing intakes may be considerable but have not been examined previously. The objective of the present study was to estimate the economic impact of increased dietary fiber consumption on direct medical costs associated with constipation. Methods Literature searches were conducted to identify nationally representative input parameters for the U.S. population, which included prevalence of functional constipation; current dietary fiber intakes; proportion of the population meeting recommended intakes; and the percentage that would be expected to respond, in terms of alleviation of constipation, to a change in dietary fiber consumption. A dose–response analysis of published data was conducted to estimate the percent reduction in constipation prevalence per 1 g/day increase in dietary fiber intake. Annual direct medical costs for constipation were derived from the literature and updated to U.S. $ 2012. Sensitivity analyses explored the impact on adult vs. pediatric populations and the robustness of the model to each input parameter. Results The base case direct medical cost-savings was $12.7 billion annually among adults. The base case assumed that 3% of men and 6% of women currently met recommended dietary fiber intakes; each 1 g/day increase in dietary fiber intake would lead to a reduction of 1.9% in constipation prevalence; and all adults would increase their dietary fiber intake to recommended levels (mean increase of 9 g/day). Sensitivity analyses, which explored numerous alternatives, found that even if only 50% of the adult population increased dietary fiber intake by 3 g/day, annual medical costs savings exceeded $2 billion. All plausible scenarios resulted in cost savings of at least $1 billion. Conclusions Increasing dietary fiber consumption is associated with considerable cost savings, potentially exceeding $12 billion, which is a conservative estimate given the exclusion of lost productivity costs in the model. The finding that $12.7 billion in direct medical costs of constipation could be averted through simple, realistic changes in dietary practices is promising and highlights the need for strategies to increase dietary fiber intakes. PMID:24739472

Measuring scarce water saving from interregional virtual water flows in China

NASA Astrophysics Data System (ADS)

Zhao, X.; Li, Y. P.; Yang, H.; Liu, W. F.; Tillotson, M. R.; Guan, D.; Yi, Y.; Wang, H.

2018-05-01

Trade of commodities can lead to virtual water flows between trading partners. When commodities flow from regions of high water productivity to regions of low water productivity, the trade has the potential to generate water saving. However, this accounting of water saving does not account for the water scarcity status in different regions. It could be that the water saving generated from this trade occurs at the expense of the intensified water scarcity in the exporting region, and exerts limited effect on water stress alleviation in importing regions. In this paper, we propose an approach to measure the scarce water saving associated with virtual water trade (measuring in water withdrawal/use). The scarce water is quantified by multiplying the water use in production with the water stress index (WSI). We assessed the scarce water saving/loss through interprovincial trade within China using a multi-region input-output table from 2010. The results show that interprovincial trade resulted in 14.2 km3 of water loss without considering water stress, but only 0.4 km3 scarce water loss using the scarce water concept. Among the 435 total connections of virtual water flows, 254 connections contributed to 20.2 km3 of scarce water saving. Most of these connections are virtual water flows from provinces with lower WSI to that with higher WSI. Conversely, 175 connections contributed to 20.6 km3 of scarce water loss. The virtual water flow connections between Xinjiang and other provinces stood out as the biggest contributors, accounting for 66% of total scarce water loss. The results show the importance of assessing water savings generated from trade with consideration of both water scarcity status and water productivity across regions. Identifying key connections of scarce water saving is useful in guiding interregional economic restructuring towards water stress alleviation, a major goal of China’s sustainable development strategy.

Potential savings from redetermining disability among children receiving supplemental security income benefits.

PubMed

Pulcini, Christian D; Kotelchuck, Milton; Kuhlthau, Karen A; Nozzolillo, Alixandra A; Perrin, James M

2012-01-01

To compare the costs of redetermining disability to potential savings in Supplemental Security Income payments associated with different strategies for implementing Continuing Disability Reviews (CDRs) among children potentially enrolled in SSI from 2012 to 2021. We reviewed publicly available reports from the Social Security Administration and Government Accountability Office to estimate costs and savings. We considered CDRs for children ages 1-17 years, excluding mandated low-birth weight and age 18 redeterminations that SSA routinely has performed. If in 2012 the Social Security Administration performs the same number of CDRs for children as in 2010 (16,677, 1% of eligibles) at a cessation rate of 15%, the agency would experience net savings of approximately $145 million in benefit payments. If CDR numbers increased to the greatest level ever (183,211, 22% of eligibles, in 1999) at the same cessation rate, the agency would save approximately $1.6 billion in benefit payments. Increasing the numbers of CDRs for children represents a considerable opportunity for savings. Recognizing the dynamic nature of disability, the agency could reassess the persistence of disability systematically; doing so could free up resources from children who are no longer eligible and help the agency better direct its benefits to recipients with ongoing disability and whose families need support to meet the extra costs associated with raising a child with a major disability. Copyright © 2012 Academic Pediatric Association. Published by Elsevier Inc. All rights reserved.

The long-term fiscal impact of funding cuts to Danish public fertility clinics.

PubMed

Connolly, Mark P; Postma, Maarten J; Crespi, Simone; Andersen, Anders Nyboe; Ziebe, Søren

2011-12-01

This study evaluated the fiscal impact attributed to recent policy changes that limited funding to public fertility clinics in Denmark. Taking into consideration that introducing patient co-payments will influence the numbers of couples treated, the number of children born every year from assisted reproductive technology will be affected. To reflect the government perspective, the model assessed the average life course of a cohort of assisted-conception singletons taking into consideration age-specific, per-capita government transfers (e.g. education, health care, family allowances, education, pensions) and lifetime gross tax contributions to derive the discounted net tax contribution from assisted-conception singletons. An investment of €11,078 in a mother aged <40 to achieve an assisted-conception singleton was valued at €154,100 in cumulative discounted net tax revenue when the child reaches age 50. A reduction in the number of live births generated additional savings of €67-112 million due to reduced government transfers by age 25. However, by age 50, because of fewer children born and consequently fewer tax payers, a €74-123 million loss to government was estimated. The projected discounted net tax revenue attributed to assisted-conception children suggests that publicly funded treatment provides economic benefits to government over the lifetime of the conceived children. In January 2011, the Danish Parliament introduced a law that limited reimbursement to publicly funded fertility clinics in Denmark. Because reimbursement for fertility services can influence couples' ability to receive treatment, this will consequently result in fewer children being born each year. To inform the policy decision, this study assessed the fiscal consequences of the policy change on the government over many generations. The analytical framework discussed here estimates the net tax revenue of a cohort of assisted-conception children and the discounted net tax revenue that these children pay to the Danish government over their lifetime. The analysis illustrates that the government will save more costs than those directly related to public fertility services because fewer children are likely to be born and consequently to require government services (e.g. education, health care, family allowances). However, over time as the assisted-conception cohort matures and enters the work force. the reduced number of assisted-conception children, attributed to the funding cuts, will negatively impact government accounts due to lost tax revenue. The policy analysis described here suggests that the economic impact of the fertility policy change is dependent on the time frame over which the analysis is considered. In the short term, it is possible to save on assisted reproduction treatment costs; however, taking into consideration the life course of the diminished size of the assisted-conception cohort, this will negatively influence government accounts in the future. Copyright © 2011 Reproductive Healthcare Ltd. Published by Elsevier Ltd. All rights reserved.

Travelers’ Value of Time and Reliability as Measured on Katy Freeway : Final Report.

DOT National Transportation Integrated Search

2016-09-01

The value of travel time savings (VOT) is an estimate of what travelers would be willing to pay in order to save time on a particular trip. If travelers would pay $1 to reduce their travel time by six minutes, then they have a VOT of $10 per hour. VO...

Efficiency and Accuracy in Thermal Simulation of Powder Bed Fusion of Bulk Metallic Glass

NASA Astrophysics Data System (ADS)

Lindwall, J.; Malmelöv, A.; Lundbäck, A.; Lindgren, L.-E.

2018-05-01

Additive manufacturing by powder bed fusion processes can be utilized to create bulk metallic glass as the process yields considerably high cooling rates. However, there is a risk that reheated material set in layers may become devitrified, i.e., crystallize. Therefore, it is advantageous to simulate the process to fully comprehend it and design it to avoid the aforementioned risk. However, a detailed simulation is computationally demanding. It is necessary to increase the computational speed while maintaining accuracy of the computed temperature field in critical regions. The current study evaluates a few approaches based on temporal reduction to achieve this. It is found that the evaluated approaches save a lot of time and accurately predict the temperature history.

The Beliefs, Myths, and Reality Surrounding the Word Hema (Blood) from Homer to the Present

PubMed Central

Meletis, John; Konstantopoulos, Kostas

2010-01-01

All ancient nations hinged their beliefs about hema (blood) on their religious dogmas as related to mythology or the origins of religion. The Hellenes (Greeks) especially have always known hema as the well-known red fluid of the human body. Greek scientific considerations about blood date from Homeric times. The ancient Greeks considered hema as synonymous with life. In Greek myths and historical works, one finds the first references to the uninterrupted vascular circulation of blood, the differences between venous and arterial blood, and the bone marrow as the site of blood production. The Greeks also speculated about mechanisms of blood coagulation and the use of blood transfusion to save life. PMID:21490910

Asynchronous sampled-data approach for event-triggered systems

NASA Astrophysics Data System (ADS)

Mahmoud, Magdi S.; Memon, Azhar M.

2017-11-01

While aperiodically triggered network control systems save a considerable amount of communication bandwidth, they also pose challenges such as coupling between control and event-condition design, optimisation of the available resources such as control, communication and computation power, and time-delays due to computation and communication network. With this motivation, the paper presents separate designs of control and event-triggering mechanism, thus simplifying the overall analysis, asynchronous linear quadratic Gaussian controller which tackles delays and aperiodic nature of transmissions, and a novel event mechanism which compares the cost of the aperiodic system against a reference periodic implementation. The proposed scheme is simulated on a linearised wind turbine model for pitch angle control and the results show significant improvement against the periodic counterpart.

Housing flexibility effects on rotor stability

NASA Technical Reports Server (NTRS)

Davis, L. B.; Wolfe, E. A.; Beatty, R. F.

1985-01-01

Preliminary rotordynamic evaluations are performed with a housing stiffness assumption that is typically determined only after the hardware is built. In addressing rotor stability, a rigid housing assumption was shown to predict an instability at a lower spin speed than a comparable flexible housing analysis. This rigid housing assumption therefore provides a conservative estimate of the stability threshold speed. A flexible housing appears to act as an energy absorber and dissipated some of the destabilizing force. The fact that a flexible housing is usually asymmetric and considerably heavier than the rotor was related to this apparent increase in rotor stability. Rigid housing analysis is proposed as a valuable screening criteria and may save time and money in construction of elaborate housing finite element models for linear stability analyses.

[Beyond moral education: the modern transformation of traditional medical charity].

PubMed

Zhang, T T

2017-09-28

In traditional society, medical charity had strong moral and educational purposes. But this pursuit of morality faded away in modern times. As to the charity purpose, unlike the medical charity organizations that were eager to rebuild the morality and public ethics, instead, more and more interests were paid to utilitarian consideration and secular benefits. As to the social function of charity, "diseases" were no longer regarded as the extension of "poverty" , but the most direct index of rehabilitation. Medical activities became increasingly simple and developed towards professionalization, leading to the advent, to certain extent, of modern medical system. Medical charity, as a strategic approach for saving the nation and social reform, went beyond moral education, embodying national responsibility and political intention.

Penetrating cardiac injury: sustaining health by building team resilience in growing civilian violence.

PubMed

Pol, Manjunath Maruti; Prasad, K Shiv Krishna; Deo, Vishant; Uniyal, Madhur

2016-09-02

Penetrating cardiac injury (PCI) is gradually increasing in developing countries owing to large-scale manufacturing of illegal country-made weapons. These injuries are associated with significant morbidity and mortality. Logistically it is difficult to have all organ-based specialists arrive together and attend every critically injured patient round-the-clock in developing countries. It is therefore important for doctors (physicians, surgeons and anaesthetists) to be trained for adequate management of critically injured patients following trauma. We report the approach towards 2 cases of haemodynamically unstable PCI managed by a team of trauma doctors. Time lag (duration between injury and arrival at hospital) and quick horizontal resuscitation are important considerations in the treatment. By not referring these patients to different hospitals the team actually reduced the time lag, and a quick life-saving surgery by trauma surgeons (trained in torso surgery) offered these almost dying patients a chance of survival. 2016 BMJ Publishing Group Ltd.

Development and experimental validation of a frying model to estimate acrylamide levels in French fries.

PubMed

Palazoğlu, T K; Gökmen, V

2008-04-01

In this study, a numerical model was developed to simulate frying of potato strips and estimate acrylamide levels in French fries. Heat and mass transfer parameters determined during frying of potato strips and the formation and degradation kinetic parameters of acrylamide obtained with a sugar-asparagine model system were incorporated within the model. The effect of reducing sugar content (0.3 to 2.15 g/100 g dry matter), strip thickness (8.5 x 8.5 mm and 10 x 10 mm), and frying time (3, 4, 5, and 6 min) and temperature (150, 170, and 190 degrees C) on resultant acrylamide level in French fries was investigated both numerically and experimentally. The model appeared to closely estimate the acrylamide contents, and thereby may potentially save considerable time, money, and effort during the stages of process design and optimization.

Aerodynamics of a cycling team in a time trial: does the cyclist at the front benefit?

NASA Astrophysics Data System (ADS)

Íñiguez-de-la Torre, A.; Íñiguez, J.

2009-11-01

When seasonal journeys take place in nature, birds and fishes migrate in groups. This provides them not only with security but also a considerable saving of energy. The power they need to travel requires overcoming aerodynamic or hydrodynamic drag forces, which can be substantially reduced when the group travels in an optimal arrangement. Also in this area, humans imitate nature, which is especially evident in the practice of outdoor sports and motor competitions. Cycle races, in which speeds of up to 15 m s-1 are frequent, offer great opportunities to appreciate the advantage of travelling in a group. Here we present a brief analysis of the aerodynamics of a cycling team in a time-trial challenge, showing how each rider is favoured according to his position in the group. We conclude that the artificial tail wind created by the team also benefits the cyclist at the front by about 5%.

Testing an Asset-Building Approach for Young People: Early Access to Savings Predicts Later Savings

ERIC Educational Resources Information Center

Friedline, Terri; Elliott, William; Chowa, Gina A. N.

2013-01-01

A major hypothesis of asset-building is that early access to savings accounts leads to continued and improved educational and economic outcomes over time. This study asks whether or not young adults (ages 18-22) in 2007, particularly among lower income households, are significantly more likely to own savings accounts and to accumulate more savings…

Daylight Savings Time Transitions and the Incidence Rate of Unipolar Depressive Episodes.

PubMed

Hansen, Bertel T; Sønderskov, Kim M; Hageman, Ida; Dinesen, Peter T; Østergaard, Søren D

2017-05-01

Daylight savings time transitions affect approximately 1.6 billion people worldwide. Prior studies have documented associations between daylight savings time transitions and adverse health outcomes, but it remains unknown whether they also cause an increase in the incidence rate of depressive episodes. This seems likely because daylight savings time transitions affect circadian rhythms, which are implicated in the etiology of depressive disorder. Therefore, we investigated the effects of daylight savings time transitions on the incidence rate of unipolar depressive episodes. Using time series intervention analysis of nationwide data from the Danish Psychiatric Central Research Register from 1995 to 2012, we compared the observed trend in the incidence rate of hospital contacts for unipolar depressive episodes after the transitions to and from summer time to the predicted trend in the incidence rate. The analyses were based on 185,419 hospital contacts for unipolar depression and showed that the transition from summer time to standard time were associated with an 11% increase (95% CI = 7%, 15%) in the incidence rate of unipolar depressive episodes that dissipated over approximately 10 weeks. The transition from standard time to summer time was not associated with a parallel change in the incidence rate of unipolar depressive episodes. This study shows that the transition from summer time to standard time was associated with an increase in the incidence rate of unipolar depressive episodes. Distress associated with the sudden advancement of sunset, marking the coming of a long period of short days, may explain this finding. See video abstract at, http://links.lww.com/EDE/B179.

Insights from Smart Meters: Identifying Specific Actions, Behaviors, and Characteristics That Drive Savings in Behavior-Based Programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Todd, A.; Perry, M.; Smith, B.

2014-12-01

In this report, we use smart meter data to analyze specific actions, behaviors, and characteristics that drive energy savings in a BB program. Specifically, we examine a Home Energy Report (HER) program. These programs typically obtain 1% to 3% annual savings, and recent studies have shown hourly savings of between 0.5% and 3%.1 But what is driving these savings? What types of households tend to be “high-savers,” and what behaviors are they adopting? There are several possibilities: one-time behaviors (e.g., changing thermostat settings), reoccurring habitual behaviors (e.g., turning off lights), and equipment purchase behaviors (e.g., energy efficient appliances); these maymore » vary across households, regions, and over time.« less

Insights from Smart Meters. Identifying Specific Actions, Behaviors and Characteristics that drive savings in Behavior-Based Programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Todd, Annika; Perry, Michael; Smith, Brian

2014-12-01

In this report, we use smart meter data to analyze specific actions, behaviors, and characteristics that drive energy savings in a behavior-based (BB) program. Specifically, we examine a Home Energy Report (HER) program. These programs typically obtain 1% to 3% annual savings, and recent studies have shown hourly savings of between 0.5% and 3%. But what is driving these savings? What types of households tend to be “high-savers”, and what behaviors are they adopting? There are several possibilities: one-time behaviors (e.g., changing thermostat settings); reoccurring habitual behaviors (e.g., turning off lights); and equipment purchase behaviors (e.g., energy efficient appliances), andmore » these may vary across households, regions, and over time.« less

The Impact of Diabetes on the Labour Force Participation, Savings and Retirement Income of Workers Aged 45-64 Years in Australia

PubMed Central

Schofield, Deborah; Cunich, Michelle; Kelly, Simon; Passey, Megan E.; Shrestha, Rupendra; Callander, Emily; Tanton, Robert; Veerman, Lennert

2015-01-01

Background Diabetes is a debilitating and costly condition. The costs of reduced labour force participation due to diabetes can have severe economic impacts on individuals by reducing their living standards during working and retirement years. Methods A purpose-built microsimulation model of Australians aged 45-64 years in 2010, Health&WealthMOD2030, was used to estimate the lost savings at age 65 due to premature exit from the labour force because of diabetes. Regression models were used to examine the differences between the projected savings and retirement incomes of people at age 65 for those currently working full or part time with no chronic health condition, full or part time with diabetes, and people not in the labour force due to diabetes. Results All Australians aged 45-65 years who are employed full time in 2010 will have accumulated some savings at age 65; whereas only 90.5% of those who are out of the labour force due to diabetes will have done so. By the time they reach age 65, those who retire from the labour force early due to diabetes have a median projected savings of less than $35,000. This is far lower than the median value of total savings for those who remained in the labour force full time with no chronic condition, projected to have $638,000 at age 65. Conclusions Not only does premature retirement due to diabetes limit the immediate income available to individuals with this condition, but it also reduces their long-term financial capacity by reducing their accumulated savings and the income these savings could generate in retirement. Policies designed to support the labour force participation of those with diabetes, or interventions to prevent the onset of the disease itself, should be a priority to preserve living standards comparable with others who do not suffer from this condition. PMID:25706941

A New Method to Directly Observe Tuberculosis Treatment: Skype Observed Therapy, a Patient-Centered Approach.

PubMed

Buchman, Tavora; Cabello, Celina

Tuberculosis (TB) treatment completion is in part determined by patient's adherence to long-term drug regimens. To best ensure compliance, directly observed therapy (DOT) is considered the standard of practice. Nassau County Department of Health TB Control is responsible for providing DOT to patients with TB. Tuberculosis Control sought to use and evaluate Skype Observed Therapy (SOT) as an alternative to DOT for eligible patients. The evaluation included analysis of patient's acceptance and adherence to drug regimen using SOT. Tuberculosis Control assessed staff efficiency and cost savings for this program. Percentages of SOT of patients and successful SOT visits, mileage, and travel time savings. Twenty percent of the caseload used SOT and 100% of patients who were eligible opted in. Average SOT success was 79%. Total mileage savings and time saved were $9,929.07 and 614 hours. Because SOT saves cost and time and is a suitable alternative to DOT for patients, it should be considered as part of new policies and practices in TB control programs.

White Nail Radio Transmitter: Billion Dollar Savings through Energy Efficiency

DTIC Science & Technology

2011-05-10

increase efficiency and reduce overall energy consumption ashore by 50 percent CNO, Navy Energy Vision, P 10 White Nail Vision Your Cell Phone Cell...Estimated Total Number of transmitters 3,000,000 Estimated total power saved Watt 1,250,000,000 Cell Phone Transmitter Efficiency 1.25 Gigawatts saved...Greenhouse Gas Power 4 1 Energy Navy Use 7.3 Billion kWh White Nail Cell Phone Savings 11 Billion kWh One and a half times!!! Saves the output of four of

Evaluating the benefits of digital pathology implementation: Time savings in laboratory logistics.

PubMed

Baidoshvili, Alexi; Bucur, Anca; van Leeuwen, Jasper; van der Laak, Jeroen; Kluin, Philip; van Diest, Paul J

2018-06-20

The benefits of digital pathology for workflow improvement and thereby cost savings in pathology, at least partly outweighing investment costs, are increasingly recognized. Successful implementations in a variety of scenarios start to demonstrate cost benefits of digital pathology for both research and routine diagnostics, contributing to a sound business case encouraging further adoption. To further support new adopters, there is still a need for detailed assessment of the impact this technology has on the relevant pathology workflows with emphasis on time saving. To assess the impact of digital pathology adoption on logistic laboratory tasks (i.e. not including pathologists' time for diagnosis making) in LabPON, a large regional pathology laboratory in The Netherlands. To quantify the benefits of digitization we analyzed the differences between the traditional analog and new digital workflows, carried out detailed measurements of all relevant steps in key analog and digital processes, and compared time spent. We modeled and assessed the logistic savings in five workflows: (1) Routine diagnosis, (2) Multi-disciplinary meeting, (3) External revision requests, (4) Extra stainings and (5) External consultation. On average over 19 working hours were saved on a typical day by working digitally, with the highest savings in routine diagnosis and multi-disciplinary meeting workflows. By working digitally, a significant amount of time could be saved in a large regional pathology lab with a typical case mix. We also present the data in each workflow per task and concrete logistic steps to allow extrapolation to the context and case mix of other laboratories. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

31 CFR 315.93 - Supplements, amendments, or revisions.

Code of Federal Regulations, 2014 CFR

2014-07-01

.... SAVINGS BONDS, SERIES A, B, C, D, E, F, G, H, J, AND K, AND U.S. SAVINGS NOTES Miscellaneous Provisions § 315.93 Supplements, amendments, or revisions. The Secretary of the Treasury may at any time, or from time to time, prescribe additional, supplemental, amendatory, or revised rules and regulations...

A time-cost augmented economic evaluation of oral deferasirox versus infusional deferoxamine [corrected] for patients with iron overload in South Korea.

PubMed

Kim, Jinhyun; Kim, Younhee

2009-01-01

This study aims to conduct an economic evaluation of oral deferasirox (DSX) compared with infusional deferoxamine (DFO) in patients with transfusional iron overload. Depending on the methods for measuring time-cost and convenience associated with the mode of administration, either cost-utility analysis or cost-effectiveness analysis was undertaken. The difference in compliance rate between DSX and DFO was applied. Although the drug cost of DSX was US$124,070 higher than that of DFO (US$96,039 vs. US$220,199), all other costs were lower in patients with DSX than in patients with DFO. In the cost-utility analysis, DSX resulted in US$3197 savings with a gain of 2.63 quality-adjusted life-years per patient. The result of the cost-effectiveness analysis also showed that DSX dominated DFO. With a considerable improvement in convenience and injection time rather than efficacy, DSX is considered as a dominant therapy for patients with iron overload.

Differential and relaxed image foresting transform for graph-cut segmentation of multiple 3D objects.

PubMed

Moya, Nikolas; Falcão, Alexandre X; Ciesielski, Krzysztof C; Udupa, Jayaram K

2014-01-01

Graph-cut algorithms have been extensively investigated for interactive binary segmentation, when the simultaneous delineation of multiple objects can save considerable user's time. We present an algorithm (named DRIFT) for 3D multiple object segmentation based on seed voxels and Differential Image Foresting Transforms (DIFTs) with relaxation. DRIFT stands behind efficient implementations of some state-of-the-art methods. The user can add/remove markers (seed voxels) along a sequence of executions of the DRIFT algorithm to improve segmentation. Its first execution takes linear time with the image's size, while the subsequent executions for corrections take sublinear time in practice. At each execution, DRIFT first runs the DIFT algorithm, then it applies diffusion filtering to smooth boundaries between objects (and background) and, finally, it corrects possible objects' disconnection occurrences with respect to their seeds. We evaluate DRIFT in 3D CT-images of the thorax for segmenting the arterial system, esophagus, left pleural cavity, right pleural cavity, trachea and bronchi, and the venous system.

In-line monitoring of granule moisture in fluidized-bed dryers using microwave resonance technology.

PubMed

Buschmüller, Caroline; Wiedey, Wolfgang; Döscher, Claas; Dressler, Jochen; Breitkreutz, Jörg

2008-05-01

This is the first report on in-line moisture measurement of pharmaceutical products by microwave resonance technology. In order to meet the FDA's PAT approach, a microwave resonance sensor appropriate for pharmaceutical use was developed and implemented into two different fluidized-bed dryers. The novel sensor enables a continuous moisture measurement independent from the product density. Hence, for the first time precise real time determination of the moisture in pharmaceutical granules becomes possible. The qualification of the newly developed sensor was performed by drying placebo granules under experimental conditions and the validation using drug loaded granules under real process conditions. The results of the investigations show good correlations between water content of the granules determined by the microwave resonance sensor and both reference methods, loss on drying by infrared light exposure and Karl Fischer titration. Furthermore, a considerable time saving in the drying process was achieved through monitoring the residual water content continuously by microwave resonance technology instead of the formerly used discontinuous methods.

Growth Inhibition Test for Identification of Mycoplasma Species Utilizing Dried Antiserum-Impregnated Paper Discs

PubMed Central

Stanbridge, Eric; Hayflick, Leonard

1967-01-01

The growth inhibition test for identifying Mycoplasma species has been modified by drying antibody-impregnated paper discs at 5 C. When stored at −20 C, these discs have been found to retain their inhibitory activity for longer than 7 months. Since these discs can be stored for long period of time, significant advantages over present methods result. When, for example, discs are arranged on a ring, a single test can be used for the identification of an unknown human species. Valuable antisera can be distributed to other laboratories on paper discs in much less volume than can fluid antiserum. Considerable savings of time result from prior preparation of many discs that can then be stored and used over a long period of time. The growth-inhibiting antibody is stable, and the activity is not enhanced by a heat-labile accessory factor from fresh guinea pig serum which increases the antibody titer in the metabolic inhibition test. Images PMID:5340308

Design of an MR image processing module on an FPGA chip

NASA Astrophysics Data System (ADS)

Li, Limin; Wyrwicz, Alice M.

2015-06-01

We describe the design and implementation of an image processing module on a single-chip Field-Programmable Gate Array (FPGA) for real-time image processing. We also demonstrate that through graphical coding the design work can be greatly simplified. The processing module is based on a 2D FFT core. Our design is distinguished from previously reported designs in two respects. No off-chip hardware resources are required, which increases portability of the core. Direct matrix transposition usually required for execution of 2D FFT is completely avoided using our newly-designed address generation unit, which saves considerable on-chip block RAMs and clock cycles. The image processing module was tested by reconstructing multi-slice MR images from both phantom and animal data. The tests on static data show that the processing module is capable of reconstructing 128 × 128 images at speed of 400 frames/second. The tests on simulated real-time streaming data demonstrate that the module works properly under the timing conditions necessary for MRI experiments.

Design of an MR image processing module on an FPGA chip

PubMed Central

Li, Limin; Wyrwicz, Alice M.

2015-01-01

We describe the design and implementation of an image processing module on a single-chip Field-Programmable Gate Array (FPGA) for real-time image processing. We also demonstrate that through graphical coding the design work can be greatly simplified. The processing module is based on a 2D FFT core. Our design is distinguished from previously reported designs in two respects. No off-chip hardware resources are required, which increases portability of the core. Direct matrix transposition usually required for execution of 2D FFT is completely avoided using our newly-designed address generation unit, which saves considerable on-chip block RAMs and clock cycles. The image processing module was tested by reconstructing multi-slice MR images from both phantom and animal data. The tests on static data show that the processing module is capable of reconstructing 128 × 128 images at speed of 400 frames/second. The tests on simulated real-time streaming data demonstrate that the module works properly under the timing conditions necessary for MRI experiments. PMID:25909646

Estimated saving of antibiotics in pharyngitis and lower respiratory tract infections if general practitioners used rapid tests and followed guidelines.

PubMed

Llor, Carles; Moragas, Ana; Cots, Josep M; López-Valcárcel, Beatriz González

General practitioners (GP) in Spain do not have access to rapid tests and adherence to guidelines is usually suboptimal. The aim of the study is to evaluate the estimated number of antibiotics that could have been saved if GPs had appropriately used these tests and had followed the guidelines. Observational study. Primary care centres from eight Autonomous Communities in Spain. GPs who had not participated in previous studies on rational use of antibiotics. GPs registered all the cases of pharyngitis and lower respiratory tract infections (LRTI) during 15 working days in 2015, by means of a 47-item audit. Actual GPs' antibiotic prescription and estimated number of antibiotics that could have been saved according to recent guidelines. A total of 126 GPs registered 1012 episodes of pharyngitis and 1928 LRTIs. Antibiotics were given or patients were referred in 497 patients with pharyngitis (49.1%) and 963 patients with LRTI (49.9%). If GPs had appropriately used rapid antigen detection tests and C-reactive protein tests and had strictly followed current guidelines, antibiotics would have been given to 7.6% and 15.1%, respectively, with an estimated saving of 420 antibiotics in patients with sore throat (estimated saving of 84.5%; 95% CI: 81.1-87.4%) and 672 antibiotics in LRTIs (estimated saving of 69.8%,95% CI: 67.1-72.5%). GP adherence to guidelines and a correct introduction of rapid tests in clinical practice in Spain could result in a considerable saving of unnecessary prescription of antibiotics in pharyngitis and LRTIs. Copyright © 2016 Elsevier España, S.L.U. All rights reserved.

Threshold analysis of reimbursing physicians for the application of fluoride varnish in young children.

PubMed

Hendrix, Kristin S; Downs, Stephen M; Brophy, Ginger; Carney Doebbeling, Caroline; Swigonski, Nancy L

2013-01-01

Most state Medicaid programs reimburse physicians for providing fluoride varnish, yet the only published studies of cost-effectiveness do not show cost-savings. Our objective is to apply state-specific claims data to an existing published model to quickly and inexpensively estimate the cost-savings of a policy consideration to better inform decisions - specifically, to assess whether Indiana Medicaid children's restorative service rates met the threshold to generate cost-savings. Threshold analysis was based on the 2006 model by Quiñonez et al. Simple calculations were used to "align" the Indiana Medicaid data with the published model. Quarterly likelihoods that a child would receive treatment for caries were annualized. The probability of a tooth developing a cavitated lesion was multiplied by the probability of using restorative services. Finally, this rate of restorative services given cavitation was multiplied by 1.5 to generate the threshold to attain cost-savings. Restorative services utilization rates, extrapolated from available Indiana Medicaid claims, were compared with these thresholds. For children 1-2 years old, restorative services utilization was 2.6 percent, which was below the 5.8 percent threshold for cost-savings. However, for children 3-5 years of age, restorative services utilization was 23.3 percent, exceeding the 14.5 percent threshold that suggests cost-savings. Combining a published model with state-specific data, we were able to quickly and inexpensively demonstrate that restorative service utilization rates for children 36 months and older in Indiana are high enough that fluoride varnish regularly applied by physicians to children starting at 9 months of age could save Medicaid funds over a 3-year horizon. © 2013 American Association of Public Health Dentistry.

17 CFR 240.0-2 - Business hours of the Commission.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Eastern Daylight Saving Time, whichever currently is in effect in Washington, DC, provided that hours for... 8 a.m. to 10 p.m., Eastern Standard Time or Eastern Daylight Saving Time, whichever is currently in... Saturdays, Sundays and federal holidays, from 8 a.m. to 5:30 p.m., Eastern Standard Time or Eastern Daylight...

17 CFR 240.0-2 - Business hours of the Commission.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Eastern Daylight Saving Time, whichever currently is in effect in Washington, DC, provided that hours for... 8 a.m. to 10 p.m., Eastern Standard Time or Eastern Daylight Saving Time, whichever is currently in... Saturdays, Sundays and federal holidays, from 8 a.m. to 5:30 p.m., Eastern Standard Time or Eastern Daylight...

Weighing the cost of educational inflation in undergraduate medical education.

PubMed

Cusano, Ronald; Busche, Kevin; Coderre, Sylvain; Woloschuk, Wayne; Chadbolt, Karen; McLaughlin, Kevin

2017-08-01

Despite the fact that the length of medical school training has remained stable for many years, the expectations of graduating medical students (and the schools that train them) continue to increase. In this Reflection, the authors discuss motives for educational inflation and suggest that these are likely innocent, well-intentioned, and subconscious-and include both a propensity to increase expectations of ourselves and others over time, and a reluctance to reduce training content and expectations. They then discuss potential risks of educational inflation, including reduced emphasis on core knowledge and clinical skills, and adverse effects on the emotional, psychological, and financial wellbeing of students. While acknowledging the need to change curricula to improve learning and clinical outcomes, the authors proffer that it is naïve to assume that we can inflate educational expectations at no additional cost. They suggest that before implementing and/or mandating change, we should consider of all the costs that medical schools and students might incur, including opportunity costs and the impact on the emotional and financial wellbeing of students. They propose a cost-effectiveness framework for medical education and advocate prioritization of interventions that improve learning outcomes with no additional costs or are cost-saving without adversely impacting learning outcomes. When there is an additional cost for improved learning outcomes or a decline in learning outcomes as a result of cost saving interventions, they suggest careful consideration and justification of this trade-off. And when there are neither improved learning outcomes nor cost savings they recommend resisting the urge to change.

Modeling potential effects of reduced calories in kids' meals with toy giveaways.

PubMed

Freij, Maysoun Y; Sell, Randall L; Bozack, Anne K; Weiss, Linda J; Garcia, Ana C

2014-02-01

Given the large proportion of daily calories attributable to fast food, there is growing interest in considering whether ordinances that restrict calories in kids' meals with toy giveaways could avert weight gain among children. Based upon a literature review and stakeholder feedback, a model was developed to estimate the potential number of children that could be affected by a statewide toy giveaway ordinance and the caloric savings should such a policy effectively reduce the number of calories in kids' meals with toy giveaways. Assumptions included the estimated number of children that eat fast food each day, the proportion that choose a kids' meal with a toy, the caloric savings of a kids' meal that meets nutrition standards, and the degree to which these savings could result in weight gain averted per child per year. Using New York as a case study, the model estimates that, on a typical day, 5% (163,571) of children 0-12 years of age in New York could be affected by a toy ordinance. A child who typically consumes fast food two times per week could avoid gaining approximately 2 pounds per year with an ordinance requiring kids' meals to be ≤550 calories. The amount of weight gain averted would vary according to the calorie limit set by the law and the frequency of consumption per week. Our model indicates that a reduction in calories in kids' meals with toy giveaways has the potential to positively affect weight gain in a considerable percentage of children. Limitations of the model are considered.

The Potential Cost-Effectiveness and Equity Impacts of Restricting Television Advertising of Unhealthy Food and Beverages to Australian Children.

PubMed

Brown, Vicki; Ananthapavan, Jaithri; Veerman, Lennert; Sacks, Gary; Lal, Anita; Peeters, Anna; Backholer, Kathryn; Moodie, Marjory

2018-05-15

Television (TV) advertising of food and beverages high in fat, sugar and salt (HFSS) influences food preferences and consumption. Children from lower socioeconomic position (SEP) have higher exposure to TV advertising due to more time spent watching TV. This paper sought to estimate the cost-effectiveness of legislation to restrict HFSS TV advertising until 9:30 pm, and to examine how health benefits and healthcare cost-savings differ by SEP. Cost-effectiveness modelling was undertaken (i) at the population level, and (ii) by area-level SEP. A multi-state multiple-cohort lifetable model was used to estimate obesity-related health outcomes and healthcare cost-savings over the lifetime of the 2010 Australian population. Incremental cost-effectiveness ratios (ICERs) were reported, with assumptions tested through sensitivity analyses. An intervention restricting HFSS TV advertising would cost AUD5.9M (95% UI AUD5.8M⁻AUD7M), resulting in modelled reductions in energy intake (mean 115 kJ/day) and body mass index (BMI) (mean 0.352 kg/m²). The intervention is likely to be cost-saving, with 1.4 times higher total cost-savings and 1.5 times higher health benefits in the most disadvantaged socioeconomic group (17,512 HALYs saved (95% UI 10,372⁻25,155); total cost-savings AUD126.3M (95% UI AUD58.7M⁻196.9M) over the lifetime) compared to the least disadvantaged socioeconomic group (11,321 HALYs saved (95% UI 6812⁻15,679); total cost-savings AUD90.9M (95% UI AUD44.3M⁻136.3M)). Legislation to restrict HFSS TV advertising is likely to be cost-effective, with greater health benefits and healthcare cost-savings for children with low SEP.

The Potential Cost-Effectiveness and Equity Impacts of Restricting Television Advertising of Unhealthy Food and Beverages to Australian Children

PubMed Central

Veerman, Lennert; Lal, Anita; Peeters, Anna; Backholer, Kathryn; Moodie, Marjory

2018-01-01

Television (TV) advertising of food and beverages high in fat, sugar and salt (HFSS) influences food preferences and consumption. Children from lower socioeconomic position (SEP) have higher exposure to TV advertising due to more time spent watching TV. This paper sought to estimate the cost-effectiveness of legislation to restrict HFSS TV advertising until 9:30 pm, and to examine how health benefits and healthcare cost-savings differ by SEP. Cost-effectiveness modelling was undertaken (i) at the population level, and (ii) by area-level SEP. A multi-state multiple-cohort lifetable model was used to estimate obesity-related health outcomes and healthcare cost-savings over the lifetime of the 2010 Australian population. Incremental cost-effectiveness ratios (ICERs) were reported, with assumptions tested through sensitivity analyses. An intervention restricting HFSS TV advertising would cost AUD5.9M (95% UI AUD5.8M–AUD7M), resulting in modelled reductions in energy intake (mean 115 kJ/day) and body mass index (BMI) (mean 0.352 kg/m2). The intervention is likely to be cost-saving, with 1.4 times higher total cost-savings and 1.5 times higher health benefits in the most disadvantaged socioeconomic group (17,512 HALYs saved (95% UI 10,372–25,155); total cost-savings AUD126.3M (95% UI AUD58.7M–196.9M) over the lifetime) compared to the least disadvantaged socioeconomic group (11,321 HALYs saved (95% UI 6812–15,679); total cost-savings AUD90.9M (95% UI AUD44.3M–136.3M)). Legislation to restrict HFSS TV advertising is likely to be cost-effective, with greater health benefits and healthcare cost-savings for children with low SEP. PMID:29762517

Energy efficiency in California laboratory-type facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mills, E.; Bell, G.; Sartor, D.

The central aim of this project is to provide knowledge and tools for increasing the energy efficiency and performance of new and existing laboratory-type facilities in California. We approach the task along three avenues: (1) identification of current energy use and savings potential, (2) development of a {ital Design guide for energy- Efficient Research Laboratories}, and (3) development of a research agenda for focused technology development and improving out understanding of the market. Laboratory-type facilities use a considerable amount of energy resources. They are also important to the local and state economy, and energy costs are a factor in themore » overall competitiveness of industries utilizing laboratory-type facilities. Although the potential for energy savings is considerable, improving energy efficiency in laboratory-type facilities is no easy task, and there are many formidable barriers to improving energy efficiency in these specialized facilities. Insufficient motivation for individual stake holders to invest in improving energy efficiency using existing technologies as well as conducting related R&D is indicative of the ``public goods`` nature of the opportunity to achieve energy savings in this sector. Due to demanding environmental control requirements and specialized processes, laboratory-type facilities epitomize the important intersection between energy demands in the buildings sector and the industrial sector. Moreover, given the high importance and value of the activities conducted in laboratory-type facilities, they represent one of the most powerful contexts in which energy efficiency improvements stand to yield abundant non-energy benefits if properly applied.« less

Estimating the Value of Life, Injury, and Travel Time Saved Using a Stated Preference Framework.

PubMed

Niroomand, Naghmeh; Jenkins, Glenn P

2016-06-01

The incidence of fatality over the period 2010-2014 from automobile accidents in North Cyprus is 2.75 times greater than the average for the EU. With the prospect of North Cyprus entering the EU, many investments will need to be undertaken to improve road safety in order to reach EU benchmarks. The objective of this study is to provide local estimates of the value of a statistical life and injury along with the value of time savings. These are among the parameter values needed for the evaluation of the change in the expected incidence of automotive accidents and time savings brought about by such projects. In this study we conducted a stated choice experiment to identify the preferences and tradeoffs of automobile drivers in North Cyprus for improved travel times, travel costs, and safety. The choice of route was examined using mixed logit models to obtain the marginal utilities associated with each attribute of the routes that consumers choose. These estimates were used to assess the individuals' willingness to pay (WTP) to avoid fatalities and injuries and to save travel time. We then used the results to obtain community-wide estimates of the value of a statistical life (VSL) saved, the value of injury (VI) prevented, and the value per hour of travel time saved. The estimates for the VSL range from €315,293 to €1,117,856 and the estimates of VI from € 5,603 to € 28,186. These values are consistent, after adjusting for differences in incomes, with the median results of similar studies done for EU countries. Copyright © 2016 Elsevier Ltd. All rights reserved.

Costs of Neisseria meningitidis Group A Disease and Economic Impact of Vaccination in Burkina Faso

PubMed Central

Colombini, Anaïs; Trotter, Caroline; Madrid, Yvette; Karachaliou, Andromachi; Preziosi, Marie-Pierre

2015-01-01

Background. Five years since the successful introduction of MenAfriVac in a mass vaccination campaign targeting 1- to 29-year-olds in Burkina Faso, consideration must be given to the optimal strategies for sustaining population protection. This study aims to estimate the economic impact of a range of vaccination strategies in Burkina Faso. Methods. We performed a cost-of-illness study, comparing different vaccination scenarios in terms of costs to both households and health systems over a 26-year time horizon. These scenarios are (1) reactive vaccination campaign (baseline comparator); (2) preventive vaccination campaign; (3) routine immunization at 9 months; and (4) a combination of routine and an initial catchup campaign of children under 5. Costs were estimated from a literature review, which included unpublished programmatic documents and peer-reviewed publications. The future disease burden for each vaccination strategy was predicted using a dynamic transmission model of group A Neisseria meningitidis. Results. From 2010 to 2014, the total costs associated with the preventive campaign targeting 1- to 29-year-olds with MenAfriVac were similar to the estimated costs of the reactive vaccination strategy (approximately 10 million US dollars [USD]). Between 2015 and 2035, routine immunization with or without a catch-up campaign of 1- to 4-year-olds is cost saving compared with the reactive strategy, both with and without discounting costs and cases. Most of the savings are accrued from lower costs of case management and household costs resulting from a lower burden of disease. After the initial investment in the preventive strategy, 1 USD invested in the routine strategy saves an additional 1.3 USD compared to the reactive strategy. Conclusions. Prevention strategies using MenAfriVac will be significantly cost saving in Burkina Faso, both for the health system and for households, compared with the reactive strategy. This will protect households from catastrophic expenditures and increase the development capacity of the population. PMID:26553677

Design and Development of an Intelligent Energy Controller for Home Energy Saving in Heating/Cooling System

NASA Astrophysics Data System (ADS)

Abaalkhail, Rana

Energy is consumed every day at home as we perform simple tasks, such as watching television, washing dishes and heating/cooling home spaces during season of extreme weather conditions, using appliances, or turning on lights. Most often, the energy resources used in residential systems are obtained from natural gas, coal and oil. Moreover, climate change has increased awareness of a need for expendable, energy resources. As a result, carbon dioxide emissions are increasing and creating a negative effect on our environment and on our health. In fact, growing energy demands and limited natural resource might have negative impacts on our future. Therefore, saving energy is becoming an important issue in our society and it is receiving more attention from the research community. This thesis introduces a intelligent energy controller algorithm based on software agent approach that reduce the energy consumption at home for both heating and cooling spaces by considering the user's occupancy, outdoor temperature and user's preferences as input to the system. Thus the proposed approach takes into consideration the occupant's preferred temperature, the occupied and unoccupied spaces, as well as the time spent in each area of the home. A Java based simulator has been implemented to simulate the algorithm for saving energy in heating and cooling systems. The results from the simulator are compared to the results of using HOT2000, which is Canada's leading residential energy analysis and rating software developed by CanmetENERGY's Housing, Buildings, Communities and Simulation (HBCS) group. We have calculated how much energy a home modelled will use under emulated conditions. The results showed that the implementation of the proposed energy controller algorithm can save up to 50% in energy consumption in homes dedicated to heating and cooling systems compared to the results obtained by using HOT2000.

Ethical considerations during times of conflict: challenges and pitfalls for the psychiatrist.

PubMed

Strous, Rael D

2013-01-01

Despite the advances of civilization, conflict remains in many areas around the world. Often psychiatry finds itself playing an essential role in dealing with the consequences of conflict or influencing the process. Along with this involvement comes great responsibility as well as many associated ethical dilemmas. Although bound by professional medical oaths, many physicians disregard fundamental medical ethical principles during times of conflict and situations of "dual loyalty." The phenomenon should be addressed so that ethical awareness and sensitivity to these issues are nurtured. Important factors for psychiatrists during times of conflict to consider include their "social contract" with the community, dangers of boundary violations, the ethics of media contact, involvement in governmental and political activities and confidentiality. In addition, their role in conflict resolution and unique ethical considerations in the military should be considered. While as regular citizens, psychiatrists in their individual capacity may involve themselves in political activism, at an organizational level it should be discouraged. A physician's skills should only be exploited to save lives and provide comfort as entrusted by society, and any other pursuit, even in the name of the state, should be proscribed. Rather than engage in political activism, psychiatrists can promote the rights of patients, especially if these rights are limited during conflict. Responsibility and ethically-driven commitment needs to be primary for the psychiatrist who involves himself either directly or indirectly with patients during times of conflict. Trauma and its effects during conflict should be addressed without any unbalanced attention to pathological responses.

17 CFR 229.904 - (Item 904) Risk factors and other considerations.

Code of Federal Regulations, 2014 CFR

2014-04-01

...-up transaction on investors in each partnership, including, but not limited to: (1) The potential... difference(s). Instruction to Item 904. The requirement to quantify the effects of the roll-up transaction... partnerships is identified as a potential benefit of the roll-up transaction, the amount of cost savings and a...

17 CFR 229.904 - (Item 904) Risk factors and other considerations.

Code of Federal Regulations, 2012 CFR

2012-04-01

...-up transaction on investors in each partnership, including, but not limited to: (1) The potential... difference(s). Instruction to Item 904. The requirement to quantify the effects of the roll-up transaction... partnerships is identified as a potential benefit of the roll-up transaction, the amount of cost savings and a...

17 CFR 229.904 - (Item 904) Risk factors and other considerations.

Code of Federal Regulations, 2013 CFR

2013-04-01

...-up transaction on investors in each partnership, including, but not limited to: (1) The potential... difference(s). Instruction to Item 904. The requirement to quantify the effects of the roll-up transaction... partnerships is identified as a potential benefit of the roll-up transaction, the amount of cost savings and a...

Thermal energy storage for industrial waste heat recovery

NASA Technical Reports Server (NTRS)

Hoffman, H. W.; Kedl, R. J.; Duscha, R. A.

1978-01-01

Thermal energy storage systems designed for energy conservation through the recovery, storage, and reuse of industrial process waste heat are reviewed. Consideration is given to systems developed for primary aluminum, cement, the food processing industry, paper and pulp, and primary iron and steel. Projected waste-heat recovery and energy savings are listed for each category.

Use of Biographical and Interview Information in Predicting Naval Academy Disenrollment.

ERIC Educational Resources Information Center

Dann, Joyce E.; Abrahams, Norman M.

Given the attrition rate of nearly 30 percent for each entering U.S. Naval Academy class an attrition prediction instrument for use in selection could represent considerable monetary savings. In previous research, the Naval Academy Personal History Booklet (PHB) has shown some validity as a predictor of Academy disenrollment. The present research…

LearningCounts Portfolio Assessment Means Cost Savings for Students…and Employers

ERIC Educational Resources Information Center

Olson, Richard; Klein-Collins, Rebecca

2014-01-01

Adults who pursue postsecondary education often bring with them considerable college-level learning that they acquired from their work, military, or life experience. Through prior learning assessment (PLA), they may be able to have this learning evaluated for college credit. One form of PLA is individualized assessment, in which students prepare a…

Should you outsource your hospital's security services? Some things to consider.

PubMed

DiNapoli, David V

2014-01-01

The author, who has managed both in-house and contracted security services, states unequivocally that hospitals can save money by hiring a security company, but cautions that there may be other considerations involved. In this article he provides guidance on making valid and meaningful comparisons between the two options.

Modular container assembled from fiber reinforced thermoplastic sandwich panels

DOEpatents

Donnelly, Mathew William; Kasoff, William Andrew; Mcculloch, Patrick Carl; Williams, Frederick Truman

2007-12-25

An improved, load bearing, modular design container structure assembled from thermoformed FRTP sandwich panels in which is utilized the unique core-skin edge configuration of the present invention in consideration of improved load bearing performance, improved useful load volume, reduced manufacturing costs, structural weight savings, impact and damage tolerance and repair and replace issues.

Incorporating indirect costs into a cost-benefit analysis of laparoscopic adjustable gastric banding.

PubMed

Finkelstein, Eric A; Allaire, Benjamin T; Dibonaventura, Marco Dacosta; Burgess, Somali M

2012-01-01

The objective of this study was to estimate the time to breakeven and 5-year net costs of laparoscopic adjustable gastric banding (LAGB) taking both direct and indirect costs and cost savings into account. Estimates of direct cost savings from LAGB were available from the literature. Although longitudinal data on indirect cost savings were not available, these estimates were generated by quantifying the relationship between medical expenditures and absenteeism and between medical expenditures and presenteeism (reduced on-the-job productivity) and combining these elasticity estimates with estimates of the direct cost savings to generate total savings. These savings were then combined with the direct and indirect costs of the procedure to quantify net savings. By including indirect costs, the time to breakeven was reduced by half a year, from 16 to 14 quarters. After 5 years, net savings in medical expenditures from a gastric banding procedure were estimated to be $4970 (±$3090). Including absenteeism increased savings to $6180 (±$3550). Savings were further increased to $10,960 (±$5864) when both absenteeism and presenteeism estimates were included. This study presented a novel approach for including absenteeism and presenteeism estimates in cost-benefit analyses. Application of the approach to gastric banding among surgery-eligible obese employees revealed that the inclusion of indirect costs and cost savings improves the business case for the procedure. This approach can easily be extended to other populations and treatments. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Logic of energy conservation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schipper, L.; Darmstadter, J.

1978-01-01

Energy conservation is seen as a complex mix of economic and moral considerations, which should be applied to specific strategies for changing waste handling, lifestyle, growth, etc., after meaningful payoffs have been researched and identified. The author recommends measuring energy conservation in terms of primary energy resources saved, and evaluating changes in consumption patterns on the basis of indirect as well as direct energy use. He feels consideration should be given to the intensity of energy use as well as to before-and-after comparisons. Human factors and wellbeing need to be included in shifts from energy-intensive to labor-intensive equipment. Curtailment ofmore » energy supplies as a conservation technique is seen as less effective than substitution, changes in habit and attitude, and changes in the types of goods and services demanded. While add-on investments have short-term value, new capital-equipment investments offer greater energy and economic savings in the long run. The author cautions against using strict rules to determine energy efficiency by relating energy to gross national product. Conservation is seen as an economic stimulus when compared to the costs of not conserving. 14 references. (DCK)« less

A Study on the Optimal Duration of Daylight Saving Time (DST) in Korea

NASA Astrophysics Data System (ADS)

Mihn, Byeong-Hee; Ahn, Young Sook; Kim, Dong-Bin; Yang, Hong-Jin

2009-09-01

Daylight saving time aims at spending effective daylight in summer season. Korea had enforced daylight saving time twelve times from 1948 to 1988. Since 1988, it is not executed, but it is recently discussed the resumption of DST. In this paper, we investigate the trend of DST in other countries, review the history of DST in Korea, and suggest the optimal DST duration in terms of astronomical aspects (times of sunrise and sunset). We find that the starting day of DST in Korea is apt for the second Sunday in May or the second Sunday in April according to the time of sunrise or to the difference between Korean standard meridian and observer's, respectively. We also discuss time friction that might be caused by time difference between DST and Korea Standard Time (KST).

Towards an energy-friendly and cleaner solvent-extraction of vegetable oil.

PubMed

Kong, Weibin; Baeyens, Jan; Qin, Peiyong; Zhang, Huili; Tan, Tianwei

2018-07-01

The extraction of vegetable oils is an energy-intensive process. It has moreover a significant environmental impact through hexane emissions and through the production of organic-loaded wastewater. A rice bran oil process was selected as the basis, since full data were available. By using Aspen Plus v8.2 simulation, with additional scripts, several improvements were examined, such as using heat exchanger networks, integrating a Vapor Recompression Heat Pump after the evaporation and stripping, and examining a nitrogen stripping of hexane in the rice bran meal desolventizing unit followed by a gas membrane to recover hexane. Energy savings by the different individual and combined improvements are calculated, and result in a 94.2% gain in steam consumption and a 73.8% overall energy saving. The power consumption of the membrane unit reduces the overall energy savings by about 5%. Hexane separation and enrichment by gas membranes facilitates its condensation and re-use, while achieving a reduction of hexane emissions by over 50%. Through the considerable reduction of required steam flow rates, 61% of waste water is eliminated, mostly as organic-loaded steam condensate. Through overall energy savings, 52% of related CO 2 emissions are eliminated. Copyright © 2018 Elsevier Ltd. All rights reserved.

The economic considerations of patients and caregivers in choice of dialysis modality

PubMed Central

Howard, Kirsten; Tong, Allison; Palmer, Suetonia C.; Marshall, Mark R.; Morton, Rachael L.

2016-01-01

Abstract Introduction Broader adoption of home dialysis could lead to considerable cost savings for health services. Globally, however, uptake remains low. The aim of this study was to describe patient and caregiver perspectives of the economic considerations that influence dialysis modality choice, and elicit policy‐relevant recommendations. Methods Semistructured interviews with predialysis or dialysis patients and their caregivers, at three hospitals in New Zealand. Interview transcripts were analyzed thematically. Findings 43 patients and 9 caregivers (total n = 52) participated. The three themes related to economic considerations were: (i) productivity losses associated with changes in employment; (ii) the need for personal subsidization of home dialysis expenses; and (iii) the role of socio‐economic disadvantage as a barrier to home dialysis. Patients weighed the flexibility of home dialysis which allowed them to remain employed, against time required for training and out‐of‐pocket costs. Patients saw the lack of reimbursement of home dialysis costs as unjust and suggested that reimbursement would incentivize home dialysis uptake. Social disadvantage was a barrier to home dialysis as patients’ housing was often unsuitable; they could not afford the additional treatment costs. Home hemodialysis was considered to have the highest out‐of‐pocket costs and was sometimes avoided for this reason. Discussion Our data suggests that economic considerations underpin the choices patients make about dialysis treatments, however these are rarely reported. To promote home dialysis, strategies to improve employment retention and housing, and to minimize out‐of‐pocket costs, need to be addressed directly by healthcare providers and payers. PMID:27196634

Chapter 9: Metering Cross-Cutting Protocol. The Uniform Methods Project: Methods for Determining Energy-Efficiency Savings for Specific Measures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mort, Dan

Estimated energy savings are calculated as the difference between the energy use during the baseline period and the energy use during the post installation period of the EEM. This chapter describes the physical properties measured in the process of evaluating EEMs and the specific metering methods for several types of measurements. Skill-level requirements and other operating considerations are discussed, including where, when, and how often measurements should be made. The subsequent section identifies metering equipment types and their respective measurement accuracies. This is followed by sections containing suggestions regarding proper data handling procedures and the categorization and definition of severalmore » load types.« less

Solar energy system performance evaluation. Seasonal report for Colt Pueblo, Pueblo, Colorado

NASA Technical Reports Server (NTRS)

1980-01-01

The Colt-Pueblo solar energy system, designed to provide space heating and hot water preheating, is described and its operational performance for a 12 month period from February 1979 through January 1980 is evaluated. The space heating subsystem met 31 percent of the measured space heating load which was close to the expected 34 percent solar fraction. Although the hot water solar fraction was 79 percent, the overall energy saving capability was reduced because of the low hot water demand. The measured heating subsystem performance would have improved considerably if the uncontrolled losses primarily from transport piping could have been reduced to an inconsequential level. Fossil energy savings of 70.31 million BTUs are estimated.

Defense.gov Special Report: The Virtual Worlds of DOD

Science.gov Websites

for training, research and a growing number of other activities to save money, time and lives. May 9 Defense Department will save money, time, and ultimately, lives, he said, and it's his job to make that

Practical Considerations of Waste Heat Reuse for a Mars Mission Advanced Life Support System

NASA Technical Reports Server (NTRS)

Levri, Julie; Finn, Cory; Luna, Bernadette (Technical Monitor)

2000-01-01

Energy conservation is a key issue in design optimization of Advanced Life Support Systems (ALSS) for long-term space missions. By considering designs for conservation at the system level, energy saving opportunities arise that would otherwise go unnoticed. This paper builds on a steady-state investigation of system-level waste heat reuse in an ALSS with a low degree of crop growth for a Mars mission. In past studies, such a system has been defined in terms of technology types, hot and cold stream identification and stream energy content. The maximum steady-state potential for power and cooling savings within the system was computed via the Pinch Method. In this paper, several practical issues are considered for achieving a pragmatic estimate of total system savings in terms of equivalent system mass (ESM), rather than savings solely in terms of power and cooling. In this paper, more realistic ESM savings are computed by considering heat transfer inefficiencies during material transfer. An estimate of the steady-state mass, volume and crewtime requirements associated with heat exchange equipment is made by considering heat exchange equipment material type and configuration, stream flow characteristics and associated energy losses during the heat exchange process. Also, previously estimated power and cooling savings are adjusted to reflect the impact of such energy losses. This paper goes one step further than the traditional Pinch Method of considering waste heat reuse in heat exchangers to include ESM savings that occur with direct reuse of a stream. For example, rather than exchanging heat between crop growth lamp cooling air and air going to a clothes dryer, air used to cool crop lamps might be reused directly for clothes drying purposes. When thermodynamically feasible, such an approach may increase ESM savings by minimizing the mass, volume and crewtime requirements associated with stream routing equipment.

Oral ciprofloxacin: a pharmacoeconomic evaluation of its use in the treatment of serious infections.

PubMed

Balfour, J A; Faulds, D

1993-05-01

The broad spectrum of antibacterial activity and favourable pharmacokinetic profile of ciprofloxacin permit oral treatment of many serious infections which have traditionally necessitated parenteral antibacterial therapy. This has been demonstrated in comparative studies, in which ciprofloxacin was as effective and well tolerated as standard parenteral therapies (usually aminoglycoside/beta-lactam combinations or broad spectrum cephalosporins) in small numbers of patients with infections of the lower respiratory tract, urinary tract, skin and soft tissue, and bones and joints. Oral ciprofloxacin is considerably less expensive than most parenteral therapies, does not necessitate therapeutic drug monitoring and can be administered on an outpatient basis. In addition, administration by the oral route is more comfortable and convenient for the patient. Pharmacoeconomic studies have confirmed that substitution of oral ciprofloxacin for parenteral therapy in the treatment of serious infections can achieve considerable savings in drug acquisition costs, and labour and supplies associated with parenteral drug administration, and may allow early discharge from hospital, resulting in even greater savings. Mean reductions of 43 to 83% were achieved in antibacterial costs in 3 randomised prospective studies, when patients received oral ciprofloxacin instead of various parenteral agents, from the beginning of treatment, or after 3 days' parenteral therapy. It can be concluded that oral ciprofloxacin offers considerable scope for cost avoidance when appropriately substituted for parenteral therapy in the treatment of serious infections.

Contemplating the ultimate sacrifice: identity fusion channels pro-group affect, cognition, and moral decision making.

PubMed

Swann, William B; Gómez, Angel; Buhrmester, Michael D; López-Rodríguez, Lucía; Jiménez, Juan; Vázquez, Alexandra

2014-05-01

Although most people acknowledge the moral virtue in sacrificing oneself to save others, few actually endorse self-sacrifice. Seven experiments explored the cognitive and emotional mechanisms that underlie such endorsements. Participants responded to 1 of 2 moral dilemmas in which they could save 5 members of their country only by sacrificing themselves. Over 90% of participants acknowledged that the moral course of action was to sacrifice oneself to save others (Experiment 1), yet only those who were strongly fused with the group preferentially endorsed self-sacrifice (Experiments 2-7). The presence of a concern with saving group members rather than the absence of a concern with self-preservation motivated strongly fused participants to endorse sacrificing themselves for the group (Experiment 3). Analyses of think aloud protocols suggested that saving others was motivated by emotional engagement with the group among strongly fused participants but by utilitarian concerns among weakly fused participants (Experiment 4). Hurrying participants' responses increased self-sacrifice among strongly fused participants but decreased self-sacrifice among weakly fused participants (Experiment 5). Priming the personal self increased endorsement of self-sacrifice among strongly fused participants but further reduced endorsement of self-sacrifice among weakly fused participants (Experiment 6). Strongly fused participants ignored utilitarian considerations, but weakly fused persons endorsed self-sacrifice more when it would save more people (Experiment 7). Apparently, the emotional engagement with the group experienced by strongly fused persons overrides the desire for self-preservation and compels them to translate their moral beliefs into self-sacrificial behavior.

Operating room waste reduction in plastic and hand surgery.

PubMed

Albert, Mark G; Rothkopf, Douglas M

2015-01-01

Operating rooms (ORs), combined with labour and delivery suites, account for approximately 70% of hospital waste. Previous studies have reported that recycling can have a considerable financial impact on a hospital-wide basis; however, its importance in the OR has not been demonstrated. To propose a method of decreasing cost through judicious selection of instruments and supplies, and initiation of recycling in plastic and hand surgery. The authors identified disposable supplies and instruments that are routinely opened and wasted in common plastic and hand surgery procedures, and calculated the savings that can result from eliminating extraneous items. A cost analysis was performed, which compared the expense of OR waste versus single-stream recycling and the benefit of recycling HIPAA documents and blue wrap. Fifteen total items were removed from disposable plastic packs and seven total items from hand packs. A total of US$17,381.05 could be saved per year from these changes alone. Since initiating single-stream recycling, the authors' institution has saved, on average, US$3,487 per month at the three campuses. After extrapolating at the current savings rate, one would expect to save a minimum of US$41,844 per year. OR waste reduction is an effective method of decreasing cost in the surgical setting. By revising the contents of current disposable packs and instrument sets designated for plastic and hand surgery, hospitals can reduce the amount of opened and unused material. Significant financial savings and environmental benefit can result from this judicious supply and instrument selection, as well as implementation of recycling.

Clinical impact and value of workstation single sign-on.

PubMed

Gellert, George A; Crouch, John F; Gibson, Lynn A; Conklin, George S; Webster, S Luke; Gillean, John A

2017-05-01

CHRISTUS Health began implementation of computer workstation single sign-on (SSO) in 2015. SSO technology utilizes a badge reader placed at each workstation where clinicians swipe or "tap" their identification badges. To assess the impact of SSO implementation in reducing clinician time logging in to various clinical software programs, and in financial savings from migrating to a thin client that enabled replacement of traditional hard drive computer workstations. Following implementation of SSO, a total of 65,202 logins were sampled systematically during a 7day period among 2256 active clinical end users for time saved in 6 facilities when compared to pre-implementation. Dollar values were assigned to the time saved by 3 groups of clinical end users: physicians, nurses and ancillary service providers. The reduction of total clinician login time over the 7day period showed a net gain of 168.3h per week of clinician time - 28.1h (2.3 shifts) per facility per week. Annualized, 1461.2h of mixed physician and nursing time is liberated per facility per annum (121.8 shifts of 12h per year). The annual dollar cost savings of this reduction of time expended logging in is $92,146 per hospital per annum and $1,658,745 per annum in the first phase implementation of 18 hospitals. Computer hardware equipment savings due to desktop virtualization increases annual savings to $2,333,745. Qualitative value contributions to clinician satisfaction, reduction in staff turnover, facilitation of adoption of EHR applications, and other benefits of SSO are discussed. SSO had a positive impact on clinician efficiency and productivity in the 6 hospitals evaluated, and is an effective and cost-effective method to liberate clinician time from repetitive and time consuming logins to clinical software applications. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

Atlanta congestion reduction demonstration. National evaluation : cost benefit analysis test plan.

DOT National Transportation Integrated Search

2001-01-01

Initiatives to evaluate the impact of Advanced Traveler Information Services (ATIS) over the last ten years have returned what appears to be contradictory results with respect to the time savings of ATIS users: large perceived time savings reported b...

Help!

ERIC Educational Resources Information Center

Adams, Caralee

2006-01-01

This article presents ten time-saving ideas for teachers. One great time-saving tip is to come in an hour early once or twice a week for grading papers. It is also a great idea if teachers will not give tests on Friday in order to reduce their weekend work.

Energy saving analysis on mine-water source heat pump in a residential district of Henan province, central China

NASA Astrophysics Data System (ADS)

Wang, Hong; Duan, Huanlin; Chen, Aidong

2018-02-01

In this paper, the mine-water source heat pump system is proposed in residential buildings of a mining community. The coefficient of performance (COP) and the efficiency of exergy are analyzed. The results show that the COP and exergy efficiency of the mine-water source heat pump are improved, the exergy efficiency of mine-water source heat pump is more than 10% higher than that of the air source heat pump.The electric power conservation measure of “peak load shifting” is also emphasized in this article. It shows that itis a very considerable cost in the electric saving by adopting the trough period electricity to produce hot water. Due to the proper temperature of mine water, the mine-watersource heat pump unit is more efficient and stable in performance, which further shows the advantage of mine-water source heat pump in energy saving and environmental protection. It provides reference to the design of similar heat pump system as well.

Colorado's Alternative School Calendar Program.

ERIC Educational Resources Information Center

Stiverson, C. L.

1982-01-01

Colorado's 22 school districts on a four-day week schedule, as authorized by Colorado Senate Bill 78, show comparable student achievement levels as those on a five-day schedule; support from parents, teachers; and students; improved energy savings and/or time savings; and cost savings. Five other possible benefits are listed. (LC)

31 CFR 315.10 - Limitations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... applicable to each series of bonds and savings notes for each specific year, which has varied from time to..., DEPARTMENT OF THE TREASURY BUREAU OF THE FISCAL SERVICE REGULATIONS GOVERNING U.S. SAVINGS BONDS, SERIES A, B... Limitations. Specific limitations have been placed on the amounts of bonds of each series and savings notes...

Economic considerations in coverting from oil/gas firing to coal

NASA Technical Reports Server (NTRS)

Rau, J. G.

1978-01-01

Economic considerations involved in fuel conversion such as from oil and/or gas firing to coal are discussed including investments costs for new facilities and equipment (including air pollution control equipment), operation and maintenance costs, and purchased fuel costs. An analytical approach to assessing the cost effectiveness of fuel conversion in terms of the annual net cost of conversion, the equivalent annual number of barrels of oil saved, and the integral rate of return of the conversion investment is presented. Illustrative numerical examples are presented for typical utility boilers and industrial boiler facilities. A further consideration addressed deals with the impacts of these costs on the overall financial structure of the firm and the ability of the firm to raise the necessary investment captial.

Critical early mission design considerations for lunar data systems architecture

NASA Technical Reports Server (NTRS)

Hei, Donald J., Jr.; Stephens, Elaine

1992-01-01

This paper outlines recent early mission design activites for a lunar data systems architecture. Each major functional element is shown to be strikingly similar when viewed in a common reference system. While this similarity probably deviates with lower levels of decomposition, the sub-functions can always be arranged into similar and dissimilar categories. Similar functions can be implemented as objects - implemented once and reused several times like today's advanced integrated circuits. This approach to mission data systems, applied to other NASA programs, may result in substantial agency implementation and maintenance savings. In today's zero-sum-game budgetary environment, this approach could help to enable a lunar exploration program in the next decade. Several early mission studies leading to such an object-oriented data systems design are recommended.

SSL Pricing and Efficacy Trend Analysis for Utility Program Planning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tuenge, Jason R.

2013-10-01

An LED lamp or luminaire can generally be found that matches or exceeds the efficacy of benchmark technologies in a given product category, and LED products continue to expand into ever-higher lumen output niches. However, the price premium for LED continues to pose a barrier to adoption in many applications, in spite of expected savings from reduced energy use and maintenance. Other factors—such as dimmability and quality of light—can also present challenges. The appropriate type, timing, and magnitude of energy efficiency activities will vary from organization to organization based on local variables and the method of evaluation. A number ofmore » factors merit consideration when prioritizing activities for development. Category-specific projections for pricing and efficacy are provided herein to assist in efficiency program planning efforts.« less

Dynamic Weather Routes: A Weather Avoidance Concept for Trajectory-Based Operations

NASA Technical Reports Server (NTRS)

McNally, B. David; Love, John

2011-01-01

The integration of convective weather modeling with trajectory automation for conflict detection, trial planning, direct routing, and auto resolution has uncovered a concept that could help controllers, dispatchers, and pilots identify improved weather routes that result in significant savings in flying time and fuel burn. Trajectory automation continuously and automatically monitors aircraft in flight to find those that could potentially benefit from improved weather reroutes. Controllers, dispatchers, and pilots then evaluate reroute options to assess their suitability given current weather and traffic. In today's operations aircraft fly convective weather avoidance routes that were implemented often hours before aircraft approach the weather and automation does not exist to automatically monitor traffic to find improved weather routes that open up due to changing weather conditions. The automation concept runs in real-time and employs two keysteps. First, a direct routing algorithm automatically identifies flights with large dog legs in their routes and therefore potentially large savings in flying time. These are common - and usually necessary - during convective weather operations and analysis of Fort Worth Center traffic shows many aircraft with short cuts that indicate savings on the order of 10 flying minutes. The second and most critical step is to apply trajectory automation with weather modeling to determine what savings could be achieved by modifying the direct route such that it avoids weather and traffic and is acceptable to controllers and flight crews. Initial analysis of Fort Worth Center traffic suggests a savings of roughly 50% of the direct route savings could be achievable.The core concept is to apply trajectory automation with convective weather modeling in real time to identify a reroute that is free of weather and traffic conflicts and indicates enough time and fuel savings to be considered. The concept is interoperable with today's integrated FMS/datalink. Auxiliary(lat/long) waypoints define a minimum delay reroute between current position and a downstream capture fix beyond the weather. These auxiliary waypoints can be uplinked to equipped aircraft and auto-loaded into the FMS. Alternatively, for unequipped aircraft, auxiliary waypoints can be replaced by nearby named fixes, but this could reduce potential savings. The presentation includes an overview of the automation approach and focuses on several cases in terms of potential savings, reroute complexity, best auxiliary waypoint solution vs. named fix solution, and other metrics.

Electrocatalyst advances for hydrogen oxidation in phosphoric acid fuel cells

NASA Technical Reports Server (NTRS)

Stonehart, P.

1984-01-01

The important considerations that presently exist for achieving commercial acceptance of fuel cells are centered on cost (which translates to efficiency) and lifetime. This paper addresses the questions of electrocatalyst utilization within porous electrode structures and the preparation of low-cost noble metal electrocatalyst combinations with extreme dispersions of the metal. Now that electrocatalyst particles can be prepared with dimensions of 10 A, either singly or in alloy combinations, a very large percentage of the noble metal atoms in a crystallite are available for reaction. The cost savings for such electrocatalysts in the present commercially driven environment are considerable.

ENERGY STAR® Retail Products Platform (RPP): Conditions and Considerations in Evaluating Market Transformation Programs and Evaluation Guidance for RPP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Michael; Banwell, Peter

2018-01-09

The purpose of this guide is to provide a resource for state utility regulators, utilities, the evaluation community and regulatory stakeholders on methods to measure energy savings from the ENERGY STAR Retail Products Platform (link is external). The guidelines outlined in this document were developed by evaluation experts.

Price and Value: Considerations for College Shoppers

ERIC Educational Resources Information Center

Broh, C. Anthony; Ansel, Dana

2010-01-01

Parents and students recognize the value of a college degree. Increasingly, they are borrowing large sums of money to invest in the future. Their choices about how to save for college, where to attend college, how much and from where to borrow for college, and how to repay their loans, have grown more complex. Yet families work with incomplete…

Drying Milk With Boiler Exhaust

NASA Technical Reports Server (NTRS)

Broussard, M. R.

1984-01-01

Considerable energy saved in powdered-milk industry. Only special requirement boiler fired with natural gas or other clean fuel. Boiler flue gas fed to spray drier where it directly contacts product to be dried. Additional heat supplied by auxillary combustor when boiler output is low. Approach adaptable to existing plants with minimal investment because most already equipped with natural-gas-fired boilers.

New trends in metal forming in the USA

NASA Astrophysics Data System (ADS)

1982-05-01

The use of lasers in sheet metal stamping, hydraulic presses, cold pressing, and deformation of titanium alloy to produce components which do not require subsequent machining are discussed. Superplastic deformation techniques could lead to cost savings of 90% in the aerospace industry. Precision forging and welding technologies can considerably reduce raw material costs, but investment costs are high.

Closing the Loop--Improving Energy Management in Schools. Energy Research Group Report.

ERIC Educational Resources Information Center

Isaacs, Nigel; Donn, Michael

A study of the energy savings potential in New Zealand schools demonstrates that considerable reductions in energy costs can be achieved through energy management. An initial examination of available 1985 light, heat, and water expenditures for 268 secondary schools (84 percent of the secondary schools in New Zealand) is followed by the selection…

Increase of the Specific Load Under Tension, Compression, and Buckling of Welded Steel Tubes in Airplane Construction by Suitable Treatment of Structural Steel and by Proper Design

NASA Technical Reports Server (NTRS)

Muller, J

1939-01-01

The new construction method indicated, which makes possible a considerably better material utilization and hence a saving in weight, has been tested in a number of Focke-Wulf types also in series production and has fully justified itself.

Effect of rising chemotherapy costs on the cost savings of colorectal cancer screening.

PubMed

Lansdorp-Vogelaar, Iris; van Ballegooijen, Marjolein; Zauber, Ann G; Habbema, J Dik F; Kuipers, Ernst J

2009-10-21

Although colorectal cancer screening is cost-effective, it requires a considerable net investment by governments or insurance companies. If screening was cost saving, governments and insurance companies might be more inclined to invest in colorectal cancer screening programs. We examined whether colorectal cancer screening would become cost saving with the widespread use of the newer, more expensive chemotherapies. We used the MISCAN-Colon microsimulation model to assess whether widespread use of new chemotherapies would affect the treatment savings of colorectal cancer screening in the general population. We considered three scenarios for chemotherapy use: the past, the present, and the near future. We assumed that survival improved and treatment costs for patients diagnosed with advanced stages of colorectal cancer increased over the scenarios. Screening strategies considered were annual guaiac fecal occult blood testing (FOBT), annual immunochemical FOBT, sigmoidoscopy every 5 years, colonoscopy every 10 years, and the combination of sigmoidoscopy every 5 years and annual guaiac FOBT. Analyses were conducted from the perspective of the health-care system for a cohort of 50-year-old individuals who were at average risk of colorectal cancer and were screened with 100% adherence from age 50 years to age 80 years and followed up until death. Compared with no screening, the treatment savings from preventing advanced colorectal cancer and colorectal cancer deaths by screening more than doubled with the widespread use of new chemotherapies. The lifetime average treatment savings were larger than the lifetime average screening costs for screening with Hemoccult II, immunochemical FOBT, sigmoidoscopy, and the combination of sigmoidoscopy and Hemoccult II (average savings vs costs per individual in the population: Hemoccult II, $1398 vs $859; immunochemical FOBT, $1756 vs $1565; sigmoidoscopy, $1706 vs $1575; sigmoidoscopy and Hemoccult II $1931 vs $1878). Colonoscopy did not become cost saving, but the total net costs of this strategy decreased from $1317 to $296 per individual in the population. With the increase in chemotherapy costs for advanced colorectal cancer, most colorectal cancer screening strategies have become cost saving. As a consequence, screening is a desirable approach not only to reduce colorectal cancer incidence and mortality but also to control the costs of colorectal cancer treatment.

Study on a Simple Method for Controlling the Engine Output Power of Hybrid Powered Railway Vehicles with Electric Double Layer Capacitors

NASA Astrophysics Data System (ADS)

Okano, Shota; Shibuya, Hiroyuki; Kondo, Keiichiro

This paper presents a simple and energy-saving method for controlling hybrid powered railway vehicles that run on rural non-electrified railway lines and have diesel engine and electrical double layer capacitors (EDLCs). The aim this study is to reduce both the fuel consumption and the capacitance of EDLCs. A basic idea proposed in this paper is that EDLCs supply and absorb the kinetic energy of the vehicle and the engine output compensates supply the energy loss with the vehicle running. Thus, the energy loss is not taken into consideration while expressing the EDLC voltage reference (equation 1); energy loss is considered when the engine is in operating mode. The proposed method is examined by performing numerical simulations for various values of engine operation time, load, and grade section. The results of this study reveal the relationship between the capacitance of the EDLCs and the fuel consumption. Using this proposed control methods, excessive charging of EDLCs can be avoided. The results of this study are expected to expedite the development of energy-saving railway vehicles for the non-electrified lines. Finally, the results of this study increase the possibility of developing hybrid powered railway vehicles.

The Status and Promise of Advanced M&V: An Overview of “M&V 2.0” Methods, Tools, and Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Franconi, Ellen; Gee, Matt; Goldberg, Miriam

Advanced measurement and verification (M&V) of energy efficiency savings, often referred to as M&V 2.0 or advanced M&V, is currently an object of much industry attention. Thus far, however, there has been a lack of clarity about what techniques M&V 2.0 includes, how those techniques differ from traditional approaches, what the key considerations are for their use, and what value propositions M&V 2.0 presents to different stakeholders. The objective of this paper is to provide background information and frame key discussion points related to advanced M&V. The paper identifies the benefits, methods, and requirements of advanced M&V and outlines keymore » technical issues for applying these methods. It presents an overview of the distinguishing elements of M&V 2.0 tools and of how the industry is addressing needs for tool testing, consistency, and standardization, and it identifies opportunities for collaboration. In this paper, we consider two key features of M&V 2.0: (1) automated analytics that can provide ongoing, near-real-time savings estimates, and (2) increased data granularity in terms of frequency, volume, or end-use detail. Greater data granularity for large numbers of customers, such as that derived from comprehensive implementation of advanced metering infrastructure (AMI) systems, leads to very large data volumes. This drives interest in automated processing systems. It is worth noting, however, that automated processing can provide value even when applied to less granular data, such as monthly consumption data series. Likewise, more granular data, such as interval or end-use data, delivers value with or without automated processing, provided the processing is manageable. But it is the combination of greater data detail with automated processing that offers the greatest opportunity for value. Using M&V methods that capture load shapes together with automated processing1 can determine savings in near-real time to provide stakeholders with more timely and detailed information. This information can be used to inform ongoing building operations, provide early input on energy efficiency program design, or assess the impact of efficiency by location and time of day. Stakeholders who can make use of such information include regulators, energy efficiency program administrators, program evaluators, contractors and aggregators, building owners, the investment community, and grid planners. Although each stakeholder has its own priorities and challenges related to savings measurement and verification, the potential exists for all to draw from a single set of efficiency valuation data. Such an integrated approach could provide a base consistency across stakeholder uses.« less

Clinical and economic impact of infliximab one-hour infusion protocol in patients with inflammatory bowel diseases: A multicenter study

PubMed Central

Viola, Anna; Costantino, Giuseppe; Privitera, Antonino Carlo; Bossa, Fabrizio; Lauria, Angelo; Grossi, Laurino; Principi, Maria Beatrice; Della Valle, Nicola; Cappello, Maria

2017-01-01

AIM To assess the impact of short infliximab (IFX) infusion on hospital resource utilization and costs. METHODS All inflammatory bowel diseases (IBD) patients who received IFX 1 h infusion from March 2007 to September 2014 in eight centers from Southern Italy were included in the analysis. Demographic, clinical and infusion related data were collected. The potential benefits related to the short infusion protocol were assessed both in terms of time saving and increased infusion unit capacity. In addition, indirect patient-related cost savings were evaluated. RESULTS One hundred and twenty-five patients were recruited (64 with ulcerative colitis and 61 with Crohn’s disease). Median duration of disease was of 53 mo and mean age of pts at diagnosis was of 34 years (SD: ± 13). Adverse infusion reactions were reported in less than 4% both before and after short infusion. The total number of infusions across the selected centers was of 2501 (30.5% short infusions). In the analyzed cohort, 1143 h were saved (762 in the infusion and 381 in observation phases) through the rapid IFX infusion protocol. This time saving (-15% compared to the standard protocol in infusion phase) represents, from the hospital perspective, an opportunity to optimize infusion unit capacity by allocating the saved time in alternative cost-effective treatments. This is the case of opportunity cost that represents the value of forgone benefit which could be obtained from a resource in its next-best alternative use. Hence, an extra hour of infusion in the case of standard 2-h IFX represents a loss in opportunity to provide other cost effective services. The analysis showed that the short infusion increased the infusion units capacity up to 50% on days when the IFX infusions were scheduled (infusion phase). Furthermore, the analysis showed that the short IFX infusion protocol leads to time savings also in the post-infusion phase (observation) leading to a time saving of 10% on average among the analyzed centers. Finally, the short infusion protocol has been demonstrated to lead to indirect cost savings of €138/patient (average -€17.300 on the whole cohort). CONCLUSION A short IFX infusion protocol can be considered time and cost saving in comparison to the standard infusion protocol both from the hospital’s perspective, as it contributes to increase infusion units capacity, and the patients’ perspective, as it reduces indirect costs and the impact of treatment on everyday life and work productivity. PMID:28533923

Time- and cost-saving apparatus for analytical sample filtration

Treesearch

William R. Kenealy; Joseph C. Destree

2005-01-01

Simple and cost-effective protocols were developed for removing particulates from samples prior to analysis by high performance liquid chromatography and gas chromatography. A filter and vial holder were developed for use with a 96-well filtration plate. The device saves preparation time and costs.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Engelmeier, R.L.

A technique has been described for fabrication of a radiation therapy stent that can help to stabilize the head when adjustable alignment devices are used to position a patient during radiation therapy. The technique can save time for the radiotherapist, enhance accuracy in treatment, increase patient comfort, and save the dentist time in stent fabrication.

Spectral Analysis of the Effects of Daylight Saving Time on Motor Vehicle Fatal Traffic Accidents

DOT National Transportation Integrated Search

1977-04-01

This report shows that Daylight Saving Time (DST) reduces the number of persons killed in motor vehicle fatal traffic accidents by about one percent. This estimate is based on a spectral (Fourier) analysis of these fatalities which utilizes a filteri...

The effectiveness of the 55 MPH national maximum speed limit as a life saving benefit : executive summary

DOT National Transportation Integrated Search

1981-01-01

The following report contains an analysis of the life saving benefits resulting from the 55 mph NMSL from 1974-1979. Monthly fatality data from 1970-1979 was used in a time series model to arrive at the estimated safety benefits (lives saved). The ti...

Energy Savings Forecast of SSL in General Illumination Report Summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2016-09-30

Summary of the DOE report Energy Savings Forecast of Solid-State Lighting in General Illumination Applications, a biannual report that models the adoption of LEDs in the U.S. general-lighting market, along with associated energy savings, based on the full potential DOE has determined to be technically feasible over time.

31 CFR 363.171 - How do I redeem a converted savings bond?

Code of Federal Regulations, 2014 CFR

2014-07-01

... converted savings bond? (a) Before final maturity—(1) Savings bond of any series registered in the single... bond of any series registered either in the single owner, owner with beneficiary, or entity form of registration any time prior to final maturity after the minimum holding period through your TreasuryDirect...

31 CFR 363.171 - How do I redeem a converted savings bond?

Code of Federal Regulations, 2011 CFR

2011-07-01

... converted savings bond? (a) Before final maturity—(1) Savings bond of any series registered in the single... bond of any series registered either in the single owner, owner with beneficiary, or entity form of registration any time prior to final maturity after the minimum holding period through your TreasuryDirect...

31 CFR 359.72 - May the United States supplement or amend the offering of Series I savings bonds?

Code of Federal Regulations, 2010 CFR

2010-07-01

... terms of this offering of Series I bonds at any time. ... amend the offering of Series I savings bonds? 359.72 Section 359.72 Money and Finance: Treasury... PUBLIC DEBT OFFERING OF UNITED STATES SAVINGS BONDS, SERIES I Miscellaneous Provisions § 359.72 May the...

31 CFR 359.72 - May the United States supplement or amend the offering of Series I savings bonds?

Code of Federal Regulations, 2011 CFR

2011-07-01

... terms of this offering of Series I bonds at any time. ... amend the offering of Series I savings bonds? 359.72 Section 359.72 Money and Finance: Treasury... PUBLIC DEBT OFFERING OF UNITED STATES SAVINGS BONDS, SERIES I Miscellaneous Provisions § 359.72 May the...

31 CFR 321.12 - Redemption value of securities.

Code of Federal Regulations, 2014 CFR

2014-07-01

... value of each savings security is determined by the terms of its offering and the length of time it has been outstanding. The Bureau of the Fiscal Service determines redemption values for Series A-E bonds, eligible Series EE and I bonds, and savings notes, that should be used in redeeming savings securities. [63...

31 CFR 359.72 - May the United States supplement or amend the offering of Series I savings bonds?

Code of Federal Regulations, 2013 CFR

2013-07-01

... terms of this offering of Series I bonds at any time. ... amend the offering of Series I savings bonds? 359.72 Section 359.72 Money and Finance: Treasury... PUBLIC DEBT OFFERING OF UNITED STATES SAVINGS BONDS, SERIES I Miscellaneous Provisions § 359.72 May the...

31 CFR 363.171 - How do I redeem a converted savings bond?

Code of Federal Regulations, 2010 CFR

2010-07-01

... converted savings bond? (a) Before final maturity—(1) Savings bond of any series registered in the single... bond of any series registered either in the single owner, owner with beneficiary, or entity form of registration any time prior to final maturity after the minimum holding period through your TreasuryDirect...

31 CFR 363.171 - How do I redeem a converted savings bond?

Code of Federal Regulations, 2013 CFR

2013-07-01

... converted savings bond? (a) Before final maturity—(1) Savings bond of any series registered in the single... bond of any series registered either in the single owner, owner with beneficiary, or entity form of registration any time prior to final maturity after the minimum holding period through your TreasuryDirect...

31 CFR 363.171 - How do I redeem a converted savings bond?

Code of Federal Regulations, 2012 CFR

2012-07-01

... converted savings bond? (a) Before final maturity—(1) Savings bond of any series registered in the single... bond of any series registered either in the single owner, owner with beneficiary, or entity form of registration any time prior to final maturity after the minimum holding period through your TreasuryDirect...

31 CFR 359.72 - May the United States supplement or amend the offering of Series I savings bonds?

Code of Federal Regulations, 2012 CFR

2012-07-01

... terms of this offering of Series I bonds at any time. ... amend the offering of Series I savings bonds? 359.72 Section 359.72 Money and Finance: Treasury... PUBLIC DEBT OFFERING OF UNITED STATES SAVINGS BONDS, SERIES I Miscellaneous Provisions § 359.72 May the...

77 FR 42489 - Notice of Submission for OMB Review; Office of Postsecondary Education; Application for Gaining...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-19

... with the collection results from a program change to run this one-time college savings account...; Application for Gaining Early Awareness and Readiness for Undergraduate Programs (GEAR UP) College Savings... pairing federally supported college savings accounts with GEAR UP activities as part of an overall college...

Cloud field classification based upon high spatial resolution textural features. II - Simplified vector approaches

NASA Technical Reports Server (NTRS)

Chen, D. W.; Sengupta, S. K.; Welch, R. M.

1989-01-01

This paper compares the results of cloud-field classification derived from two simplified vector approaches, the Sum and Difference Histogram (SADH) and the Gray Level Difference Vector (GLDV), with the results produced by the Gray Level Cooccurrence Matrix (GLCM) approach described by Welch et al. (1988). It is shown that the SADH method produces accuracies equivalent to those obtained using the GLCM method, while the GLDV method fails to resolve error clusters. Compared to the GLCM method, the SADH method leads to a 31 percent saving in run time and a 50 percent saving in storage requirements, while the GLVD approach leads to a 40 percent saving in run time and an 87 percent saving in storage requirements.

Energy Savings in Cellular Networks Based on Space-Time Structure of Traffic Loads

NASA Astrophysics Data System (ADS)

Sun, Jingbo; Wang, Yue; Yuan, Jian; Shan, Xiuming

Since most of energy consumed by the telecommunication infrastructure is due to the Base Transceiver Station (BTS), switching off BTSs when traffic load is low has been recognized as an effective way of saving energy. In this letter, an energy saving scheme is proposed to minimize the number of active BTSs based on the space-time structure of traffic loads as determined by principal component analysis. Compared to existing methods, our approach models traffic loads more accurately, and has a much smaller input size. As it is implemented in an off-line manner, our scheme also avoids excessive communications and computing overheads. Simulation results show that the proposed method has a comparable performance in energy savings.

Household water saving: Evidence from Spain

NASA Astrophysics Data System (ADS)

Aisa, Rosa; Larramona, Gemma

2012-12-01

This article focuses on household water use in Spain by analyzing the influence of a detailed set of factors. We find that, although the presence of both water-saving equipment and water-conservation habits leads to water savings, the factors that influence each are not the same. In particular, our results show that those individuals most committed to the adoption of water-saving equipment and, at the same time, less committed to water-conservation habits tend to have higher incomes.

Efficient method of evaluation for Gaussian Hartree-Fock exchange operator for Gau-PBE functional

NASA Astrophysics Data System (ADS)

Song, Jong-Won; Hirao, Kimihiko

2015-07-01

We previously developed an efficient screened hybrid functional called Gaussian-Perdew-Burke-Ernzerhof (Gau-PBE) [Song et al., J. Chem. Phys. 135, 071103 (2011)] for large molecules and extended systems, which is characterized by the usage of a Gaussian function as a modified Coulomb potential for the Hartree-Fock (HF) exchange. We found that the adoption of a Gaussian HF exchange operator considerably decreases the calculation time cost of periodic systems while improving the reproducibility of the bandgaps of semiconductors. We present a distance-based screening scheme here that is tailored for the Gaussian HF exchange integral that utilizes multipole expansion for the Gaussian two-electron integrals. We found a new multipole screening scheme helps to save the time cost for the HF exchange integration by efficiently decreasing the number of integrals of, specifically, the near field region without incurring substantial changes in total energy. In our assessment on the periodic systems of seven semiconductors, the Gau-PBE hybrid functional with a new screening scheme has 1.56 times the time cost of a pure functional while the previous Gau-PBE was 1.84 times and HSE06 was 3.34 times.

Efficient method of evaluation for Gaussian Hartree-Fock exchange operator for Gau-PBE functional

DOE Office of Scientific and Technical Information (OSTI.GOV)

Song, Jong-Won; Hirao, Kimihiko, E-mail: hirao@riken.jp

2015-07-14

We previously developed an efficient screened hybrid functional called Gaussian-Perdew–Burke–Ernzerhof (Gau-PBE) [Song et al., J. Chem. Phys. 135, 071103 (2011)] for large molecules and extended systems, which is characterized by the usage of a Gaussian function as a modified Coulomb potential for the Hartree-Fock (HF) exchange. We found that the adoption of a Gaussian HF exchange operator considerably decreases the calculation time cost of periodic systems while improving the reproducibility of the bandgaps of semiconductors. We present a distance-based screening scheme here that is tailored for the Gaussian HF exchange integral that utilizes multipole expansion for the Gaussian two-electron integrals.more » We found a new multipole screening scheme helps to save the time cost for the HF exchange integration by efficiently decreasing the number of integrals of, specifically, the near field region without incurring substantial changes in total energy. In our assessment on the periodic systems of seven semiconductors, the Gau-PBE hybrid functional with a new screening scheme has 1.56 times the time cost of a pure functional while the previous Gau-PBE was 1.84 times and HSE06 was 3.34 times.« less

Turtle: identifying frequent k-mers with cache-efficient algorithms.

PubMed

Roy, Rajat Shuvro; Bhattacharya, Debashish; Schliep, Alexander

2014-07-15

Counting the frequencies of k-mers in read libraries is often a first step in the analysis of high-throughput sequencing data. Infrequent k-mers are assumed to be a result of sequencing errors. The frequent k-mers constitute a reduced but error-free representation of the experiment, which can inform read error correction or serve as the input to de novo assembly methods. Ideally, the memory requirement for counting should be linear in the number of frequent k-mers and not in the, typically much larger, total number of k-mers in the read library. We present a novel method that balances time, space and accuracy requirements to efficiently extract frequent k-mers even for high-coverage libraries and large genomes such as human. Our method is designed to minimize cache misses in a cache-efficient manner by using a pattern-blocked Bloom filter to remove infrequent k-mers from consideration in combination with a novel sort-and-compact scheme, instead of a hash, for the actual counting. Although this increases theoretical complexity, the savings in cache misses reduce the empirical running times. A variant of method can resort to a counting Bloom filter for even larger savings in memory at the expense of false-negative rates in addition to the false-positive rates common to all Bloom filter-based approaches. A comparison with the state-of-the-art shows reduced memory requirements and running times. The tools are freely available for download at http://bioinformatics.rutgers.edu/Software/Turtle and http://figshare.com/articles/Turtle/791582. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Use of benchmarking techniques to justify the evolution of antibiotic management programs in healthcare systems.

PubMed

Schentag, J J; Paladino, J A; Birmingham, M C; Zimmer, G; Carr, J R; Hanson, S C

1995-01-01

To apply basic benchmarking techniques to hospital antibiotic expenditures and clinical pharmacy personnel and their duties, to identify cost savings strategies for clinical pharmacy services. Prospective survey of 18 hospitals ranging in size from 201 to 942 beds. Each was asked to provide antibiotic expenditures, an overview of their clinical pharmacy services, and to describe the duties of clinical pharmacists involved in antibiotic management activities. Specific information was sought on the use of pharmacokinetic dosing services, antibiotic streamlining, and oral switch in each of the hospitals. Most smaller hospitals (< 300 beds) did not employ clinical pharmacists with the specific duties of antibiotic management or streamlining. At these institutions, antibiotic management services consisted of formulary enforcement and aminoglycoside and/or vancomycin dosing services. The larger hospitals we surveyed employed clinical pharmacists designated as antibiotic management specialists, but their usual activities were aminoglycoside and/or vancomycin dosing services and formulary enforcement. In virtually all hospitals, the yearly expenses for antibiotics exceeded those of Millard Fillmore Hospitals by $2,000-3,000 per occupied bed. In a 500-bed hospital, this difference in expenditures would exceed $1.5 million yearly. Millard Fillmore Health System has similar types of patients, but employs clinical pharmacists to perform streamlining and/or switch functions at days 2-4, when cultures come back from the laboratory. The antibiotic streamlining and oral switch duties of clinical pharmacy specialists are associated with the majority of cost savings in hospital antibiotic management programs. The savings are considerable to the extent that most hospitals with 200-300 beds could readily cost-justify a full-time clinical pharmacist to perform these activities on a daily basis. Expenses of the program would be offset entirely by the reduction in the actual pharmacy expenditures on antibiotics.

Cost Savings from Palliative Care Teams and Guidance for a Financially Viable Palliative Care Program

PubMed Central

McCarthy, Ian M; Robinson, Chessie; Huq, Sakib; Philastre, Martha; Fine, Robert L

2015-01-01

Objectives To quantify the cost savings of palliative care (PC) and identify differences in savings according to team structure, patient diagnosis, and timing of consult. Data Sources Hospital administrative records on all inpatient stays at five hospital campuses from January 2009 through June 2012. Study Design The analysis matched PC patients to non-PC patients (separately by discharge status) using propensity score methods. Weighted generalized linear model regressions of hospital costs were estimated for the matched groups. Data Collection Data were restricted to patients at least 18 years old with inpatient stays of between 7 and 30 days. Variables available included patient demographics, primary and secondary diagnoses, hospital costs incurred for the inpatient stay, and when/if the patient had a PC consult. Principal Findings We found overall cost savings from PC of $3,426 per patient for those dying in the hospital. No significant cost savings were found for patients discharged alive; however, significant cost savings for patients discharged alive could be achieved for certain diagnoses, PC team structures, or if consults occurred within 10 days of admission. Conclusions Appropriately selected and timed PC consults with physician and RN involvement can help ensure a financially viable PC program via cost savings to the hospital. PMID:25040226

Space Vehicle Powerdown Philosophies Derived from the Space Shuttle Program

NASA Technical Reports Server (NTRS)

Willsey, Mark; Bailey, Brad

2011-01-01

In spaceflight, electrical power is a vital but limited resource. Almost every spacecraft system, from avionics to life support systems, relies on electrical power. Since power can be limited by the generation system s performance, available consumables, solar array shading, or heat rejection capability, vehicle power management is a critical consideration in spacecraft design, mission planning, and real-time operations. The purpose of this paper is to capture the powerdown philosophies used during the Space Shuttle Program. This paper will discuss how electrical equipment is managed real-time to adjust the overall vehicle power level to ensure that systems and consumables will support changing mission objectives, as well as how electrical equipment is managed following system anomalies. We will focus on the power related impacts of anomalies in the generation systems, air and liquid cooling systems, and significant environmental events such as a fire, decrease in cabin pressure, or micrometeoroid debris strike. Additionally, considerations for executing powerdowns by crew action or by ground commands from Mission Control will be presented. General lessons learned from nearly 30 years of Space Shuttle powerdowns will be discussed, including an in depth case-study of STS-117. During this International Space Station (ISS) assembly mission, a failure of computers controlling the ISS guidance, navigation, and control system required that the Space Shuttle s maneuvering system be used to maintain attitude control. A powerdown was performed to save power generation consumables, thus extending the docked mission duration and allowing more time to resolve the issue.

Analyzing the effect of the longwave emissivity and solar reflectance of building envelopes on energy-saving in buildings in various climates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shi, Zhiyang; Zhang, Xiong

A dynamic computer simulation is carried out in the climates of 35 cities distributed around the world. The variation of the annual air-conditioning energy loads due to changes in the longwave emissivity and the solar reflectance of the building envelopes is studied to find the most appropriate exterior building finishes in various climates (including a tropical climate, a subtropical climate, a mountain plateau climate, a frigid-temperate climate and a temperate climate). Both the longwave emissivity and the solar reflectance are set from 0.1 to 0.9 with an interval of 0.1 in the simulation. The annual air-conditioning energy loads trends ofmore » each city are listed in a chart. The results show that both the longwave emissivity and the solar reflectance of building envelopes play significant roles in energy-saving for buildings. In tropical climates, the optical parameters of the building exterior surface affect the building energy-saving most significantly. In the mountain plateau climates and the subarctic climates, the impacts on energy-saving in buildings due to changes in the longwave emissivity and the solar reflectance are still considerable, but in the temperate continental climates and the temperate maritime climates, only limited effects are seen. (author)« less

Cost Savings and Patient Experiences of a Clinic-Based, Wide-Awake Hand Surgery Program at a Military Medical Center: A Critical Analysis of the First 100 Procedures.

PubMed

Rhee, Peter C; Fischer, Michelle M; Rhee, Laura S; McMillan, Ha; Johnson, Anthony E

2017-03-01

Wide-awake, local anesthesia, no tourniquet (WALANT) hand surgery was developed to improve access to hand surgery care while optimizing medical resources. Hand surgery in the clinic setting may result in substantial cost savings for the United States Military Health Care System (MHS) and provide a safe alternative to performing similar procedures in the operating room. A prospective cohort study was performed on the first 100 consecutive clinic-based WALANT hand surgery procedures performed at a military medical center from January 2014 to September 2015 by a single hand surgeon. Cost savings analysis was performed by using the Medical Expense and Performance Reporting System, the standard cost accounting system for the MHS, to compare procedures performed in the clinic versus the operating room during the study period. A study specific questionnaire was obtained for 66 procedures to evaluate the patient's experience. For carpal tunnel release (n = 34) and A1 pulley release (n = 33), there were 85% and 70% cost savings by having the procedures performed in clinic under WALANT compared with the main operating room, respectively. During the study period, carpal tunnel release, A1 pulley release, and de Quervain release performed in the clinic instead of the operating room amounted to $393,100 in cost savings for the MHS. There were no adverse events during the WALANT procedure. A clinic-based WALANT hand surgery program at a military medical center results in considerable cost savings for the MHS. Economic/Decision Analysis IV. Copyright © 2017 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

Implementation Costs of an Enhanced Recovery After Surgery Program in the United States: A Financial Model and Sensitivity Analysis Based on Experiences at a Quaternary Academic Medical Center.

PubMed

Stone, Alexander B; Grant, Michael C; Pio Roda, Claro; Hobson, Deborah; Pawlik, Timothy; Wu, Christopher L; Wick, Elizabeth C

2016-03-01

Despite positive results from several international Enhanced Recovery After Surgery (ERAS) protocols, the United States has been slow to adopt ERAS protocols, in part due to concern regarding the expenses of such a program. We sought to evaluate the potential annual net cost savings of implementing a US-based ERAS program. Using data from existing publications and experience with an ERAS program, a model of net financial costs was developed for surgical groups of escalating numbers of annual cases. Our example scenario provided a financial analysis of the implementation of an ERAS program at a United States academic institution based on data from the ERAS Program for Colorectal Surgery at The Johns Hopkins Hospital. Based on available data from the United States, ERAS programs lead to reductions in lengths of hospital stay that range from 0.7 to 2.7 days and substantial direct cost savings. Using example data from a quaternary hospital, the considerable cost of $552,783 associated with implementation of an ERAS program was offset by even greater savings in the first year of nearly $948,500, yielding a net savings of $395,717. Sensitivity analysis across several caseload and direct cost scenarios yielded similar savings in 20 of the 27 projections. Enhanced Recovery After Surgery protocols have repeatedly led to reduction in length of hospital stay and improved surgical outcomes. A financial model, based on published data and experience, projects that investment in an ERAS program can also lead to net financial savings for US hospitals. Copyright © 2016 American College of Surgeons. Published by Elsevier Inc. All rights reserved.

31 CFR 359.72 - May the United States supplement or amend the offering of Series I savings bonds?

Code of Federal Regulations, 2014 CFR

2014-07-01

... amend the terms of this offering of Series I bonds at any time. ... amend the offering of Series I savings bonds? 359.72 Section 359.72 Money and Finance: Treasury... FISCAL SERVICE OFFERING OF UNITED STATES SAVINGS BONDS, SERIES I Miscellaneous Provisions § 359.72 May...

Saving billions of dollars--and physicians' time--by streamlining billing practices.

PubMed

Blanchfield, Bonnie B; Heffernan, James L; Osgood, Bradford; Sheehan, Rosemary R; Meyer, Gregg S

2010-06-01

The U.S. system of billing third parties for health care services is complex, expensive, and inefficient. Physicians end up using nearly 12 percent of their net patient service revenue to cover the costs of excessive administrative complexity. A single transparent set of payment rules for multiple payers, a single claim form, and standard rules of submission, among other innovations, would reduce the burden on the billing offices of physician organizations. On a national scale, our hypothetical modeling of these changes would translate into $7 billion of savings annually for physician and clinical services. Four hours of professional time per physician and five hours of practice support staff time could be saved each week.

An economic appraisal of the Australian Medical Sheepskin for the prevention of sacral pressure ulcers from a nursing home perspective

PubMed Central

2010-01-01

Background Many devices are in use to prevent pressure ulcers, but from most little is known about their effects and costs. One such preventive device is the Australian Medical Sheepskin that has been proven effective in three randomized trials. In this study the costs and savings from the use of the Australian Medical Sheepskin were investigated from the perspective of a nursing home. Methods An economic model was developed in which monetary costs and monetary savings in respect of the sheepskin were balanced against each other. The model was applied to a fictional (Dutch) nursing home with 100 beds for rehabilitation patients and a time horizon of one year. Input variables for the model consisted of investment costs for using the sheepskin (purchase and laundry), and savings through the prevented cases of pressure ulcers. The input values for the investment costs and for the effectiveness were empirically based on a trial with newly admitted rehabilitation patients from eight nursing homes. The input values for the costs of pressure ulcer treatment were estimated by means of four different approaches. Results Investment costs for using the Australian Medical Sheepskin were larger than the monetary savings obtained by preventing pressure ulcers. Use of the Australian Medical Sheepskin involves an additional cost of approximately €2 per patient per day. Preventing one case of a sacral pressure ulcer by means of the Australian Medical Sheepskin involves an investment of €2,974 when the sheepskin is given to all patients. When the sheepskin is selectively used for more critical patients only, the investment to prevent one case of sacral pressure ulcers decreases to €2,479 (pressure ulcer risk patients) or €1,847 (ADL-severely impaired patients). The factors with the strongest influence on the balance are the frequency of changing the sheepskin and the costs of washing related to this. The economic model was hampered by considerable uncertainty in the estimations of the costs of pressure ulcer treatment. Conclusions From a nursing home perspective, the investment costs for use of the Australian Medical Sheepskin in newly admitted rehabilitation patients are larger than the monetary savings obtained by preventing pressure ulcers. PMID:20687915

Energy Saving Melting and Revert Reduction Technology: Improved Die Casting Process to Preserve the Life of the Inserts

DOE Office of Scientific and Technical Information (OSTI.GOV)

David Schwam, PI; Xuejun Zhu, Sr. Research Associate

2012-09-30

The goal of this project was to study the combined effects of die design, proper internal cooling and efficient die lubricants on die life. The project targeted improvements in die casting insert life by: Optomized Die Design for Reduced Surface Temperature: The life of die casting dies is significantly shorter when the die is exposed to elevated temperature for significant periods of time. Any die operated under conditions leading to surface temperature in excess of 1050oF undergoes structural changes that reduce its strength. Optimized die design can improve die life significantly. This improvement can be accomplished by means of coolingmore » lines, baffles and bubblers in the die. A key objective of the project was to establish criteria for the minimal distance of the cooling lines from the surface. This effort was supported with alloys and machining by BohlerUddeholm, Dunn Steel, HH Stark and Rex Buckeye. In plant testing and evaluation was conducted as in-kind cost share at St. Clair Die Casting. The Uddeholm Dievar steel evaluated in this program showed superior resistance to thermal fatigue resistance. Based on the experimental evidence, cooling lines could be placed as close as 0.5" from the surface. Die Life Extension by Optimized Die Lubrication: The life of die casting dies is affected by additions made to its surface with the proper lubricants. These lubricants will protect the surface from the considerable temperature peaks that occur when the molten melt enters the die. Dies will reach a significantly higher temperature without this lubricant being applied. The amount and type of the lubricant are critical variables in the die casting process. However, these lubricants must not corrode the die surface. This effort was supported with alloys and machining by BohlerUddeholm, Dunn Steel, HH Stark and Rex Buckeye. In plant testing and evaluation was conducted as in-kind cost share at St. Clair Die Casting. Chem- Trend participated in the program with die lubricants and technical support. Experiments conducted with these lubricants demonstrated good protection of the substrate steel. Graphite and boron nitride used as benchmarks are capable of completely eliminating soldering and washout. However, because of cost and environmental considerations these materials are not widely used in industry. The best water-based die lubricants evaluated in this program were capable of providing similar protection from soldering and washout. In addition to improved part quality and higher production rates, improving die casting processes to preserve the life of the inserts will result in energy savings and a reduction in environmental wastes. Improving die life by means of optimized cooling line placement, baffles and bubblers in the die will allow for reduced die temperatures during processing, saving energy associated with production. The utilization of optimized die lubricants will also reduce heat requirements in addition to reducing waste associated with soldering and washout. This new technology was predicted to result in an average energy savings of 1.1 trillion BTU's/year over a 10 year period. Current (2012) annual energy saving estimates, based on commercial introduction in 2010, a market penetration of 70% by 2020 is 1.26 trillion BTU's/year. Along with these energy savings, reduction of scrap and improvement in casting yield will result in a reduction of the environmental emissions associated with the melting and pouring of the metal which will be saved as a result of this technology. The average annual estimate of CO2 reduction per year through 2020 is 0.025 Million Metric Tons of Carbon Equivalent (MM TCE).« less

SAVE Right Whales Act

THOMAS, 112th Congress

Rep. Moulton, Seth [D-MA-6

2018-06-08

House - 06/08/2018 Referred to the Committee on Natural Resources, and in addition to the Committee on the Budget, for a period to be subsequently determined by the Speaker, in each case for consideration of such provisions as fall within the jurisdiction of the committee concerned. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

SAVE Act of 2014

THOMAS, 113th Congress

Rep. Kind, Ron [D-WI-3

2014-12-11

House - 12/11/2014 Referred to the Committee on Ways and Means, and in addition to the Committee on Education and the Workforce, for a period to be subsequently determined by the Speaker, in each case for consideration of such provisions as fall within the jurisdiction of the... (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Pressure Regulators as Valves for Saving Compressed Air and their Influence on System Dynamics

NASA Astrophysics Data System (ADS)

Dvořák, Lukáš; Fojtášek, Kamil

2015-05-01

Pressure regulators in the field of pneumatic mechanisms can be used as valves for saving compressed air. For example it can be used to reduce the pressure when the piston rod is retracting unloaded and thus it is possible to save some energy. However the problem is that saving valve can significantly affect the dynamics of the pneumatic system. The lower pressure in the piston rod chamber causes extension of time for retraction of the piston rod. This article compare the air consumption experimentally determined and calculated, measured curves of pressure in cylinder chambers and piston speed when saving valve is set up differently.

Improving employee productivity through improved health.

PubMed

Mitchell, Rebecca J; Ozminkowski, Ronald J; Serxner, Seth

2013-10-01

The objective of this study was to estimate productivity-related savings associated with employee participation in health promotion programs. Propensity score weighting and multiple regression techniques were used to estimate savings. These techniques were adjusted for demographic and health status differences between participants who engaged in one or more telephonic health management programs and nonparticipants who were eligible for but did not engage in these programs. Employees who participated in a program and successfully improved their health care or lifestyle showed significant improvements in lost work time. These employees saved an average of $353 per person per year. This reflects about 10.3 hours in additional productive time annually, compared with similar, but nonparticipating employees. Participating in health promotion programs can help improve productivity levels among employees and save money for their employers.

Cost of illness of atopic dermatitis in children: a societal perspective.

PubMed

Kemp, Andrew S

2003-01-01

Childhood atopic dermatitis is a disorder with considerable social and financial costs. Consideration of these costs is increasingly important in view of the growing prevalence of atopic dermatitis, particularly in developed countries over recent decades. The family stress related to the care of children with moderate or severe atopic dermatitis is significantly greater than that of the care of children with type 1 diabetes mellitus. The factors contributing to family stress include sleep deprivation, loss of employment, time taken for care of atopic dermatitis and financial costs. The financial costs for the family and community include medical and hospital direct costs of treatments and indirect costs from loss of employment. There are many interventions utilised in the treatment of childhood atopic dermatitis which involve not only medical practitioners but nurses, pharmacists, dieticians, psychologists and purveyors of so-called alternative therapies such as naturopathy, aromatherapy and bioresonance, all of which contribute to the financial burdens on the parents and the community. It is possible that appropriate interventions directed to reducing trigger factors might produce worthwhile savings, although the cost benefit of these measures has not been demonstrated. In conclusion, atopic dermatitis should not be regarded as a minor skin disorder but as a condition which has the potential to be a major handicap with considerable personal, social and financial consequences both to the family and the community.

Potential time savings to radiology department personnel in a PACS-based environment

NASA Astrophysics Data System (ADS)

Saarinen, Allan O.; Wilson, M. C.; Iverson, Scott C.; Loop, John W.

1990-08-01

A purported benefit of digital imaging and archiving of radiographic procedures is the presumption of time savings to radiologists, radiology technologists, and radiology departmentpersonnel involved with processingfilms and managing theflimfile room. As part of the University of Washington's evaluation of Picture Archiving and Communication Systems (PACS)for the U.S. Army Medical Research and Development Command, a study was performed which evaluated the current operationalpractices of the film-based radiology department at the University of Washington Medical Center (UWMC). Industrial engineering time and motion studies were conducted to document the length of time requiredforfilm processing in various modalities, the proportion of the total exam time usedforfilm processing, the amount of time radiologists spent searchingfor and looking at images, and the amount of time file room personnel spent collating reports, making loans, updatingfilm jacket information, and purging files. This evaluation showed that better than one-half of the tasks in the file room may be eliminated with PACS and radiologists may save easily 10 percent of the time they spend reading films by no longer having to searchforfilms. Radiology technologists may also save as much as 10 percent of their time with PACS, although this estimate is subject to significant patient mix aberrations and measurement error. Given that the UWMC radiology department operates efficiently, similar improvements are forecast for other radiology departments and larger improvements areforecastfor less efficient departments.

Outsourcing of Domestic Tasks and Time-Saving Effects

ERIC Educational Resources Information Center

van der Lippe, Tanja; Tijdens, Kea; de Ruijter, Esther

2004-01-01

The increased participation of women in paid labor has changed the organization of domestic work. This article deals with a strategy to cope with remaining domestic duties; to what extent are domestic tasks outsourced, what are the main determinants, and does it indeed save time spent on housework? Five outsourcing options are investigated:…

The Interplay of Energy Balance and Daily Timing of Activity in a Subterranean Rodent: A Laboratory and Field Approach.

PubMed

Tachinardi, Patricia; Valentinuzzi, Verónica S; Oda, Gisele A; Buck, C Loren

The tuco-tuco (Ctenomys aff. knighti) is among the rodent species known to be nocturnal under standard laboratory conditions and diurnal under natural conditions. The circadian thermoenergetics (CTE) hypothesis postulates that switches in activity timing are a response to energetic challenges; daytime activity reduces thermoregulatory costs by consolidating activity to the warmest part of the day. Studying wild animals under both captive and natural conditions can increase understanding of how temporal activity patterns are shaped by the environment and could serve as a test of the CTE hypothesis. We estimated the effects of activity timing on energy expenditure for the tuco-tuco by combining laboratory measurements of metabolic rate with environmental temperature records in both winter and summer. We showed that, in winter, there would be considerable energy savings if activity is allocated at least partially during daylight, lending support to the CTE hypothesis. In summer, the impact of activity timing on energy expenditure is small, suggesting that during this season other factors, such as predation risk, water balance, and social interaction, may have more important roles than energetics in the determination of activity time.

Impact of the Removal of the Monthly Liver Function Test Requirement for Ambrisentan

PubMed Central

Durst, Louise A.; Carlsen, John; Kuchinski, Megan; Harner, Lauren; Neves, Daniel; Harris, Stephanie J.; Traiger, Glenna L.

2012-01-01

Background The management of patients with pulmonary arterial hypertension (PAH) requires extensive coordination between patients, their support system, third-party payers, and healthcare professionals. For patients with PAH who are receiving endothelin receptor antagonists (ERAs), such cross-stakeholder coordination was needed to ensure compliance with a US Food and Drug Administration (FDA) Risk Evaluation and Mitigation Strategy (REMS) requirement for monthly liver function tests (LFTs). In March 2011, the FDA removed this requirement for ambrisentan (Letairis) in conjunction with a change to the product label. Objective This study sought to explore the impact of the ambrisentan label change on payers, providers who treat PAH, and specialty pharmacies. Methods This study, conducted in June and July 2011, involved telephone interviews with 5 medical/pharmacy directors in commercial health plans (representing 78,345,000 covered lives collectively); written surveys and telephone interviews with 6 nurses managing patients with PAH; and written surveys and telephone interviews with 4 staff members from specialty pharmacies to determine direct and indirect cost-savings associated with the removal of the monthly LFT requirement for ambrisentan. Qualitative telephone interviews with payer decision makers informed the cost-savings for payers. Direct cost-savings were calculated from the responses of the nurses managing PAH regarding the prescribing trends of their practices and the frequency of LFTs. Indirect cost-savings were calculated using time-savings data collected from the PAH-managing nurses and the specialty pharmacy staff, as well as from the US Bureau of Labor Statistics data regarding national wage averages for the respective staff. Results: Payers reported that REMS requirements did not play a large role in their plan's coverage or management of ERAs; although direct cost-savings resulting from the label change were an estimated $28 per patient per month, this amount is relatively small compared with the overall cost of PAH treatment for payers. The impact of the ambrisentan label change was more significant for providers and specialty pharmacies. The label change resulted in a significant, average 69% reduction in the frequency of LFTs for patients using ambrisentan. The average monthly time-savings realized by providers as a result of the label change was 12 minutes per patient receiving ambrisentan, and the average monthly direct and indirect cost-savings totaled $10.75 and $29.75, respectively, per patient taking ambrisentan. Telephone interviews with specialty pharmacies indicated that the average monthly time-savings for the 4 specialty pharmacies surveyed was 14 minutes per patient using ambrisentan, representing an 86.7% decrease in the amount of time specialty pharmacies spent on LFT-related administrative tasks for patients using ambrisentan. Conclusion Findings from this study indicate that the ambrisentan label change significantly reduced the number of LFTs for patients with PAH, resulting in time-savings or cost-savings for payers, providers, and specialty pharmacies. PMID:24991314

Flight contaminant trace analyser. Phase 1: Chromatographic input system

NASA Technical Reports Server (NTRS)

1975-01-01

The development of a chromatographic column capable of resolving compounds associated with spacecraft atmospheres is presented. Consideration is given to sampling techniques, column parameters and operation, and column interface with a mass spectrometer. A capillary column coated with a mixture of polyalkylene glycols is found to provide the best selectivity for resolving multicomponent mixtures found in spacecraft atmospheres. Temperature programming and isothermal operation of the column are evaluated and it is found that temperature programming has a shorter analysis time for a given carrier gas flow rate and overall superior resolution. It is observed that hydrogen provides a 15% savings in analysis time over helium. Following the optimization of column operational parameters, a mixed phase Ucon capillary is prepared for evaluation during the column test period in which the test sample is automatically analyzed. Analysis of the multicomponent test mixture is completed within 45 minutes provided temperature programming is used. All but two of the test compounds are well resolved.

Design ATE systems for complex assemblies

NASA Astrophysics Data System (ADS)

Napier, R. S.; Flammer, G. H.; Moser, S. A.

1983-06-01

The use of ATE systems in radio specification testing can reduce the test time by approximately 90 to 95 percent. What is more, the test station does not require a highly trained operator. Since the system controller has full power over all the measurements, human errors are not introduced into the readings. The controller is immune to any need to increase output by allowing marginal units to pass through the system. In addition, the software compensates for predictable, repeatable system errors, for example, cabling losses, which are an inherent part of the test setup. With no variation in test procedures from unit to unit, there is a constant repeatability factor. Preparing the software, however, usually entails considerable expense. It is pointed out that many of the problems associated with ATE system software can be avoided with the use of a software-intensive, or computer-intensive, system organization. Its goal is to minimize the user's need for software development, thereby saving time and money.

Automatic Differentiation in Quantum Chemistry with Applications to Fully Variational Hartree-Fock.

PubMed

Tamayo-Mendoza, Teresa; Kreisbeck, Christoph; Lindh, Roland; Aspuru-Guzik, Alán

2018-05-23

Automatic differentiation (AD) is a powerful tool that allows calculating derivatives of implemented algorithms with respect to all of their parameters up to machine precision, without the need to explicitly add any additional functions. Thus, AD has great potential in quantum chemistry, where gradients are omnipresent but also difficult to obtain, and researchers typically spend a considerable amount of time finding suitable analytical forms when implementing derivatives. Here, we demonstrate that AD can be used to compute gradients with respect to any parameter throughout a complete quantum chemistry method. We present DiffiQult , a Hartree-Fock implementation, entirely differentiated with the use of AD tools. DiffiQult is a software package written in plain Python with minimal deviation from standard code which illustrates the capability of AD to save human effort and time in implementations of exact gradients in quantum chemistry. We leverage the obtained gradients to optimize the parameters of one-particle basis sets in the context of the floating Gaussian framework.

Energy saving through LED in signaling functions for automotive exterior lighting

NASA Astrophysics Data System (ADS)

Bony, Alexis; Hamami, Khaled; Tebbe, Frank; Mertens, Jens

2011-05-01

Safety considerations have always driven the way for improving exterior automotive lighting legal requirements. With the recent adoption of day-time running lamps for passenger cars, the steadily increasing need for reduction of vehicle power consumption has led to the introduction of LED-based day-time running lamps. Solutions with incandescent bulbs have also been implemented, as they present price advantages while offering limited design perspectives. In the meantime, technology developments has turned LED sources into ideal candidates for daytime running lamps by increasing their lumen per watt efficiency ratio towards values around 100 lm/W or higher. In this work, taking as an example the new Mercedes-Benz roadster SLK (R172), we present the first single LED daytime- running lamp, with a total power consumption below 5W per vehicle. After reviewing legal requirements, the optical and electronic concepts are discussed. Details on the tail lamp LED functions are also discussed, and particularly the advantages from the realization of fog lamp with LEDs.

Compile-time estimation of communication costs in multicomputers

NASA Technical Reports Server (NTRS)

Gupta, Manish; Banerjee, Prithviraj

1991-01-01

An important problem facing numerous research projects on parallelizing compilers for distributed memory machines is that of automatically determining a suitable data partitioning scheme for a program. Any strategy for automatic data partitioning needs a mechanism for estimating the performance of a program under a given partitioning scheme, the most crucial part of which involves determining the communication costs incurred by the program. A methodology is described for estimating the communication costs at compile-time as functions of the numbers of processors over which various arrays are distributed. A strategy is described along with its theoretical basis, for making program transformations that expose opportunities for combining of messages, leading to considerable savings in the communication costs. For certain loops with regular dependences, the compiler can detect the possibility of pipelining, and thus estimate communication costs more accurately than it could otherwise. These results are of great significance to any parallelization system supporting numeric applications on multicomputers. In particular, they lay down a framework for effective synthesis of communication on multicomputers from sequential program references.

Comparison of a new GIS-based technique and a manual method for determining sinkhole density: An example from Illinois' sinkhole plain

USGS Publications Warehouse

Angel, J.C.; Nelson, D.O.; Panno, S.V.

2004-01-01

A new Geographic Information System (GIS) method was developed as an alternative to the hand-counting of sinkholes on topographic maps for density and distribution studies. Sinkhole counts were prepared by hand and compared to those generated from USGS DLG data using ArcView 3.2 and the ArcInfo Workstation component of ArcGIS 8.1 software. The study area for this investigation, chosen for its great density of sinkholes, included the 42 public land survey sections that reside entirely within the Renault Quadrangle in southwestern Illinois. Differences between the sinkhole counts derived from the two methods for the Renault Quadrangle study area were negligible. Although the initial development and refinement of the GIS method required considerably more time than counting sinkholes by hand, the flexibility of the GIS method is expected to provide significant long-term benefits and time savings when mapping larger areas and expanding research efforts. ?? 2004 by The National Speleological Society.

Fuel optimal maneuvers for spacecraft with fixed thrusters

NASA Technical Reports Server (NTRS)

Carter, T. C.

1982-01-01

Several mathematical models, including a minimum integral square criterion problem, were used for the qualitative investigation of fuel optimal maneuvers for spacecraft with fixed thrusters. The solutions consist of intervals of "full thrust" and "coast" indicating that thrusters do not need to be designed as "throttleable" for fuel optimal performance. For the primary model considered, singular solutions occur only if the optimal solution is "pure translation". "Time optimal" singular solutions can be found which consist of intervals of "coast" and "full thrust". The shape of the optimal fuel consumption curve as a function of flight time was found to depend on whether or not the initial state is in the region admitting singular solutions. Comparisons of fuel optimal maneuvers in deep space with those relative to a point in circular orbit indicate that qualitative differences in the solutions can occur. Computation of fuel consumption for certain "pure translation" cases indicates that considerable savings in fuel can result from the fuel optimal maneuvers.

Automatic Differentiation in Quantum Chemistry with Applications to Fully Variational Hartree–Fock

PubMed Central

2018-01-01

Automatic differentiation (AD) is a powerful tool that allows calculating derivatives of implemented algorithms with respect to all of their parameters up to machine precision, without the need to explicitly add any additional functions. Thus, AD has great potential in quantum chemistry, where gradients are omnipresent but also difficult to obtain, and researchers typically spend a considerable amount of time finding suitable analytical forms when implementing derivatives. Here, we demonstrate that AD can be used to compute gradients with respect to any parameter throughout a complete quantum chemistry method. We present DiffiQult, a Hartree–Fock implementation, entirely differentiated with the use of AD tools. DiffiQult is a software package written in plain Python with minimal deviation from standard code which illustrates the capability of AD to save human effort and time in implementations of exact gradients in quantum chemistry. We leverage the obtained gradients to optimize the parameters of one-particle basis sets in the context of the floating Gaussian framework.

PCI: A PATRAN-NASTRAN model translator

NASA Technical Reports Server (NTRS)

Sheerer, T. J.

1990-01-01

The amount of programming required to develop a PATRAN-NASTRAN translator was surprisingly small. The approach taken produced a highly flexible translator comparable with the PATNAS translator and superior to the PATCOS translator. The coding required varied from around ten lines for a shell element to around thirty for a bar element, and the time required to add a feature to the program is typically less than an hour. The use of a lookup table for element names makes the translator also applicable to other versions of NASTRAN. The saving in time as a result of using PDA's Gateway utilities was considerable. During the writing of the program it became apparent that, with a somewhat more complex structure, it would be possible to extend the element data file to contain all data required to define the translation from PATRAN to NASTRAN by mapping of data between formats. Similar data files on property, material and grid formats would produce a completely universal translator from PATRAN to any FEA program, or indeed any CAE system.

A cost/benefit analysis of commercial fusion-fission hybrid reactor development

NASA Astrophysics Data System (ADS)

Kostoff, Ronald N.

1983-04-01

A simple algorithm was developed that allows rapid computation of the ratio, R, of present worth of benefits to present worth of hybrid R&D program costs as a function of potential hybrid unit electricity cost savings, discount rate, electricity demand growth rate, total hybrid R&D program cost, and time to complete a demonstration reactor. In the sensitivity study, these variables were assigned nominal values (unit electricity cost savings of 4 mills/kW-hr, discount rate of 4%/year, growth rate of 2.25%/year, total R&D program cost of 20 billion, and time to complete a demonstration reactor of 30 years), and the variable of interest was varied about its nominal value. Results show that R increases with decreasing discount rate and increasing unit electricity savings and ranges from 4 to 94 as discount rate ranges from 5 to 3%/year and unit electricity savings range from 2 to 6 mills/kW-hr. R increases with increasing growth rate and ranges from 3 to 187 as growth rate ranges from 1 to 3.5%/year and unit electricity cost savings range from 2 to 6 mills/kW-hr. R attains a maximum value when plotted against time to complete a demonstration reactor. The location of this maximum value occurs at shorter completion times as discount rate increases, and this optimal completion time ranges from 20 years for a discount rate of 4%/year to 45 years for a discount rate of 3%/year.

Looking at IT through a New Lens: Achieving Cost Savings in a Fiscally Challenging Time

ERIC Educational Resources Information Center

Claffey, George F., Jr.

2009-01-01

Information technology (IT) departments must cut costs and justify expenditures in the face of shrinking budgets. To promote greater cost savings, it is important to look at IT through a new "lens." This article discusses four broad categories that can be evaluated to determine if IT resource alignment is appropriate and if savings can…

12 CFR 391.13 - Issuance of orders to correct deficiencies and to take or refrain from taking other actions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... general. The FDIC shall provide a State savings association prior written notice of the FDIC's intention to issue an order requiring the State savings association to correct a safety and soundness... savings association shall have such time to respond to a proposed order as provided by the FDIC under...

12 CFR 391.13 - Issuance of orders to correct deficiencies and to take or refrain from taking other actions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... general. The FDIC shall provide a State savings association prior written notice of the FDIC's intention to issue an order requiring the State savings association to correct a safety and soundness... savings association shall have such time to respond to a proposed order as provided by the FDIC under...

12 CFR 391.13 - Issuance of orders to correct deficiencies and to take or refrain from taking other actions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... general. The FDIC shall provide a State savings association prior written notice of the FDIC's intention to issue an order requiring the State savings association to correct a safety and soundness... savings association shall have such time to respond to a proposed order as provided by the FDIC under...

Impact of isotropic constitutive descriptions on the predicted peak wall stress in abdominal aortic aneurysms.

PubMed

Man, V; Polzer, S; Gasser, T C; Novotny, T; Bursa, J

2018-03-01

Biomechanics-based assessment of Abdominal Aortic Aneurysm (AAA) rupture risk has gained considerable scientific and clinical momentum. However, computation of peak wall stress (PWS) using state-of-the-art finite element models is time demanding. This study investigates which features of the constitutive description of AAA wall are decisive for achieving acceptable stress predictions in it. Influence of five different isotropic constitutive descriptions of AAA wall is tested; models reflect realistic non-linear, artificially stiff non-linear, or artificially stiff pseudo-linear constitutive descriptions of AAA wall. Influence of the AAA wall model is tested on idealized (n=4) and patient-specific (n=16) AAA geometries. Wall stress computations consider a (hypothetical) load-free configuration and include residual stresses homogenizing the stresses across the wall. Wall stress differences amongst the different descriptions were statistically analyzed. When the qualitatively similar non-linear response of the AAA wall with low initial stiffness and subsequent strain stiffening was taken into consideration, wall stress (and PWS) predictions did not change significantly. Keeping this non-linear feature when using an artificially stiff wall can save up to 30% of the computational time, without significant change in PWS. In contrast, a stiff pseudo-linear elastic model may underestimate the PWS and is not reliable for AAA wall stress computations. Copyright © 2018 IPEM. Published by Elsevier Ltd. All rights reserved.

Design of an MR image processing module on an FPGA chip.

PubMed

Li, Limin; Wyrwicz, Alice M

2015-06-01

We describe the design and implementation of an image processing module on a single-chip Field-Programmable Gate Array (FPGA) for real-time image processing. We also demonstrate that through graphical coding the design work can be greatly simplified. The processing module is based on a 2D FFT core. Our design is distinguished from previously reported designs in two respects. No off-chip hardware resources are required, which increases portability of the core. Direct matrix transposition usually required for execution of 2D FFT is completely avoided using our newly-designed address generation unit, which saves considerable on-chip block RAMs and clock cycles. The image processing module was tested by reconstructing multi-slice MR images from both phantom and animal data. The tests on static data show that the processing module is capable of reconstructing 128×128 images at speed of 400 frames/second. The tests on simulated real-time streaming data demonstrate that the module works properly under the timing conditions necessary for MRI experiments. Copyright © 2015 Elsevier Inc. All rights reserved.

Corrosion/erosion detection of boiler tubes utilizing pulsed infrared imaging

NASA Astrophysics Data System (ADS)

Bales, Maurice J.; Bishop, Chip C.

1995-05-01

This paper discusses a new technique for locating and detecting wall thickness reduction in boiler tubes caused by erosion/corrosion. Traditional means for this type of defect detection utilizes ultrasonics (UT) to perform a point by point measurement at given intervals of the tube length, which requires extensive and costly shutdown or `outage' time to complete the inspection, and has led to thin areas going undetected simply because they were located in between the sampling points. Pulsed infrared imaging (PII) can provide nearly 100% inspection of the tubes in a fraction of the time needed for UT. The IR system and heat source used in this study do not require any special access or fixed scaffolding, and can be remotely operated from a distance of up to 100 feet. This technique has been tried experimentally in a laboratory environment and verified in an actual field application. Since PII is a non-contact technique, considerable time and cost savings should be realized as well as the ability to predict failures rather than repairing them once they have occurred.

Scripting human animations in a virtual environment

NASA Technical Reports Server (NTRS)

Goldsby, Michael E.; Pandya, Abhilash K.; Maida, James C.

1994-01-01

The current deficiencies of virtual environment (VE) are well known: annoying lag time in drawing the current view, drastically simplified environments to reduce that time lag, low resolution and narrow field of view. Animation scripting is an application of VE technology which can be carried out successfully despite these deficiencies. The final product is a smoothly moving high resolution animation displaying detailed models. In this system, the user is represented by a human computer model with the same body proportions. Using magnetic tracking, the motions of the model's upper torso, head and arms are controlled by the user's movements (18 degrees of freedom). The model's lower torso and global position and orientation are controlled by a spaceball and keypad (12 degrees of freedom). Using this system human motion scripts can be extracted from the user's movements while immersed in a simplified virtual environment. Recorded data is used to define key frames; motion is interpolated between them and post processing adds a more detailed environment. The result is a considerable savings in time and a much more natural-looking movement of a human figure in a smooth and seamless animation.

Multi-body modeling method for rollover using MADYMO

NASA Astrophysics Data System (ADS)

Liu, Changye; Lin, Zhigui; Lv, Juncheng; Luo, Qinyue; Qin, Zhenyao; Zhang, Pu; Chen, Tao

2017-04-01

Rollovers are complex road accidents causing a big deal of fatalities. FE model for rollover study will costtoo much time due to its long duration.A new multi-body modeling method is proposed in this paper which can save a lot of time and has high-fidelity meanwhile. Following works were carried out to validate this new method. First, a small van was tested following the FMVSS 208 protocol for the validation of the proposed modeling method. Second, a MADYMO model of this small van was reconstructed. The vehicle body was divided into two main parts, the deformable upper body and the rigid lower body, modeled by different waysbased on an FE model. The specific method of modeling is offered in this paper. Finally, the trajectories of the vehicle from test and simulation were comparedand the match was very good. Acceleration of left B pillar was taken into consideration, which turned out fitting the test result well in the time of event. The final deformation status of the vehicle in test and simulation showed similar trend. This validated model provides a reliable wayfor further research in occupant injuries during rollovers.

Avoiding Medical Identity Theft

MedlinePlus

... was not received, even when there is no money owed Maintain copies of your healthcare records Beware ... learned that a PHR saves time, energy, and money. And it saved my life! A woman's Facebook ...

[Is Herceptin(®) (trastuzumab) by subcutaneous a mini revolution? Pharmaco-economic study].

PubMed

Lieutenant, Vincent; Toulza, Émilie; Pommier, Martine; Lortal-Canguilhem, Barbara

2015-03-01

Herceptin(®) injected by intravenous (IV) is one of the key treatment of breast cancer HER2+. The improvement of galenic form allowed a new way of administration, the sub-cutaneous way (SC), authorized by EMEA in 2013. This new way enables a 5-minute infusion, a fixed dose and a fixed volume of preparation. On 2012, saving-time and financial impacts were calculated by extrapolation of the IV way in a cancer treatment center. The study showed a preparing time-saving of 7.5min/loading dose and of 6.5min/maintenance dose, and a nurse time-saving of 4.5min/loading dose and 4.25min/maintenance dose. Moreover, it can be added a saving of consumable of 13,31€ per injection in case of monotherapy. The SC leads to a new adaptation and reorganization in the preparation of monoclonal antibodies and day hospitals. Copyright © 2015 Société Française du Cancer. Published by Elsevier Masson SAS. All rights reserved.

The Spin Move: A Reliable and Cost-Effective Gowning Technique for the 21st Century.

PubMed

Ochiai, Derek H; Adib, Farshad

2015-04-01

Operating room efficiency (ORE) and utilization are considered one of the most crucial components of quality improvement in every hospital. We introduced a new gowning technique that could optimize ORE. The Spin Move quickly and efficiently wraps a surgical gown around the surgeon's body. This saves the operative time expended through the traditional gowning techniques. In the Spin Move, while the surgeon is approaching the scrub nurse, he or she uses the left heel as the fulcrum. The torque, which is generated by twisting the right leg around the left leg, helps the surgeon to close the gown as quickly and safely as possible. From 2003 to 2012, the Spin Move was performed in 1,725 consecutive procedures with no complication. The estimated average time was 5.3 and 7.8 seconds for the Spin Move and traditional gowning, respectively. The estimated time saving for the senior author during this period was 71.875 minutes. Approximately 20,000 orthopaedic surgeons practice in the United States. If this technique had been used, 23,958 hours could have been saved. The money saving could have been $14,374,800.00 (23,958 hours × $600/operating room hour) during the past 10 years. The Spin Move is easy to perform and reproducible. It saves operating room time and increases ORE.

The Spin Move: A Reliable and Cost-Effective Gowning Technique for the 21st Century

PubMed Central

Ochiai, Derek H.; Adib, Farshad

2015-01-01

Operating room efficiency (ORE) and utilization are considered one of the most crucial components of quality improvement in every hospital. We introduced a new gowning technique that could optimize ORE. The Spin Move quickly and efficiently wraps a surgical gown around the surgeon's body. This saves the operative time expended through the traditional gowning techniques. In the Spin Move, while the surgeon is approaching the scrub nurse, he or she uses the left heel as the fulcrum. The torque, which is generated by twisting the right leg around the left leg, helps the surgeon to close the gown as quickly and safely as possible. From 2003 to 2012, the Spin Move was performed in 1,725 consecutive procedures with no complication. The estimated average time was 5.3 and 7.8 seconds for the Spin Move and traditional gowning, respectively. The estimated time saving for the senior author during this period was 71.875 minutes. Approximately 20,000 orthopaedic surgeons practice in the United States. If this technique had been used, 23,958 hours could have been saved. The money saving could have been $14,374,800.00 (23,958 hours × $600/operating room hour) during the past 10 years. The Spin Move is easy to perform and reproducible. It saves operating room time and increases ORE. PMID:26052490

Information for Caregivers

MedlinePlus

... learned that a PHR saves time, energy, and money. And it saved my life! A woman's Facebook ... Doctor’s Visit A Reference Guide Blue Button Resources Mobile PHRs Blog FAQ © 2018 AHIMA, All Rights Reserved | ...

Common Privacy Myths

MedlinePlus

... learned that a PHR saves time, energy, and money. And it saved my life! A woman's Facebook ... Doctor’s Visit A Reference Guide Blue Button Resources Mobile PHRs Blog FAQ © 2018 AHIMA, All Rights Reserved | ...

Sequence History Update Tool

NASA Technical Reports Server (NTRS)

Khanampompan, Teerapat; Gladden, Roy; Fisher, Forest; DelGuercio, Chris

2008-01-01

The Sequence History Update Tool performs Web-based sequence statistics archiving for Mars Reconnaissance Orbiter (MRO). Using a single UNIX command, the software takes advantage of sequencing conventions to automatically extract the needed statistics from multiple files. This information is then used to populate a PHP database, which is then seamlessly formatted into a dynamic Web page. This tool replaces a previous tedious and error-prone process of manually editing HTML code to construct a Web-based table. Because the tool manages all of the statistics gathering and file delivery to and from multiple data sources spread across multiple servers, there is also a considerable time and effort savings. With the use of The Sequence History Update Tool what previously took minutes is now done in less than 30 seconds, and now provides a more accurate archival record of the sequence commanding for MRO.

Automated Monitoring and Analysis of Social Behavior in Drosophila

PubMed Central

Dankert, Heiko; Wang, Liming; Hoopfer, Eric D.; Anderson, David J.; Perona, Pietro

2009-01-01

We introduce a method based on machine vision for automatically measuring aggression and courtship in Drosophila melanogaster. The genetic and neural circuit bases of these innate social behaviors are poorly understood. High-throughput behavioral screening in this genetically tractable model organism is a potentially powerful approach, but it is currently very laborious. Our system monitors interacting pairs of flies, and computes their location, orientation and wing posture. These features are used for detecting behaviors exhibited during aggression and courtship. Among these, wing threat, lunging and tussling are specific to aggression; circling, wing extension (courtship “song”) and copulation are specific to courtship; locomotion and chasing are common to both. Ethograms may be constructed automatically from these measurements, saving considerable time and effort. This technology should enable large-scale screens for genes and neural circuits controlling courtship and aggression. PMID:19270697

Energy Savings Through Thermally Efficient Crucible Technology: Fundamentals, Process Modeling, and Applications

NASA Astrophysics Data System (ADS)

Shi, Wenwu; Pinto, Brian

2017-12-01

Melting and holding molten metals within crucibles accounts for a large portion of total energy demand in the resource-intensive nonferrous foundry industry. Multivariate mathematical modeling aided by detailed material characterization and advancements in crucible technologies can make a significant impact in the areas of cost-efficiency and carbon footprint reduction. Key thermal properties such as conductivity and specific heat capacity were studied to understand their influence on crucible furnace energy consumption during melting and holding processes. The effects of conductivity on thermal stresses and longevity of crucibles were also evaluated. With this information, accurate theoretical models using finite element analysis were developed to study total energy consumption and melting time. By applying these findings to recent crucible developments, considerable improvements in field performance were reported and documented as case studies in applications such as aluminum melting and holding.

Active-learning strategies in computer-assisted drug discovery.

PubMed

Reker, Daniel; Schneider, Gisbert

2015-04-01

High-throughput compound screening is time and resource consuming, and considerable effort is invested into screening compound libraries, profiling, and selecting the most promising candidates for further testing. Active-learning methods assist the selection process by focusing on areas of chemical space that have the greatest chance of success while considering structural novelty. The core feature of these algorithms is their ability to adapt the structure-activity landscapes through feedback. Instead of full-deck screening, only focused subsets of compounds are tested, and the experimental readout is used to refine molecule selection for subsequent screening cycles. Once implemented, these techniques have the potential to reduce costs and save precious materials. Here, we provide a comprehensive overview of the various computational active-learning approaches and outline their potential for drug discovery. Copyright © 2014 Elsevier Ltd. All rights reserved.

Light Pipe Energy Savings Calculator

NASA Astrophysics Data System (ADS)

Owens, Erin; Behringer, Ernest R.

2009-04-01

Dependence on fossil fuels is unsustainable and therefore a shift to renewable energy sources such as sunlight is required. Light pipes provide a way to utilize sunlight for interior lighting, and can reduce the need for fossil fuel-generated electrical energy. Because consumers considering light pipe installation may be more strongly motivated by cost considerations than by sustainability arguments, an easy means to examine the corresponding costs and benefits is needed to facilitate informed decision-making. The purpose of this American Physical Society Physics and Society Fellowship project is to create a Web-based calculator to allow users to quantify the possible cost savings for their specific light pipe application. Initial calculations show that the illumination provided by light pipes can replace electric light use during the day, and in many cases can supply greater illumination levels than those typically given by electric lighting. While the installation cost of a light pipe is significantly greater than the avoided cost of electricity over the lifetime of the light pipe at current prices, savings may be realized if electricity prices increase.

Performance analysis of male handball goalkeepers at the World Handball championship 2015

PubMed Central

Hansen, Clint; Sanz-Lopez, Fernando; Whiteley, Rodney; Popovic, Nebojsa; Ahmed, Hosny Abdelrahman

2017-01-01

Goalkeepers have a very important role in handball. In coaching communities it is well recognized that goalkeepers’ performances can predict team ranking in major tournaments. Despite this, few studies have been conducted on elite goalkeepers participating in World Championships. Therefore, the purpose of this study was to analyse goalkeepers’ save performance during the 88 matches of the 2015 men’s World Championships tournament. Goalkeepers from 24 national teams were analysed using a tracking camera system and bespoke software (Prozone Handball V.1.2, Prozone, Leeds, UK). The purpose of this study was to examine time-motion performance parameters and to evaluate the save rates for each goalkeeper. The mean total distance covered in a game by the goalkeepers was 1634±999 m. Goalkeepers spent most of the time walking or standing. The total amount of shots to the goal was 6893, with a mean save percentage of 30% (2088 saves). A significant relationship was identified between the goalkeepers’ save statistics and the final team rankings. The save rate is important for teams to achieve a higher ranking, and therefore the selection and training of goalkeepers requires more than just assessing physical abilities. The throwing distribution and success/save rate during the Qatar 2015 Men Handball World Championships suggest strong and weak parts of the goal area, and coaches can use this information to adjust their training approaches for both goalkeepers and shooters. PMID:29472743

Performance analysis of male handball goalkeepers at the World Handball championship 2015.

PubMed

Hansen, Clint; Sanz-Lopez, Fernando; Whiteley, Rodney; Popovic, Nebojsa; Ahmed, Hosny Abdelrahman; Cardinale, Marco

2017-12-01

Goalkeepers have a very important role in handball. In coaching communities it is well recognized that goalkeepers' performances can predict team ranking in major tournaments. Despite this, few studies have been conducted on elite goalkeepers participating in World Championships. Therefore, the purpose of this study was to analyse goalkeepers' save performance during the 88 matches of the 2015 men's World Championships tournament. Goalkeepers from 24 national teams were analysed using a tracking camera system and bespoke software (Prozone Handball V.1.2, Prozone, Leeds, UK). The purpose of this study was to examine time-motion performance parameters and to evaluate the save rates for each goalkeeper. The mean total distance covered in a game by the goalkeepers was 1634±999 m. Goalkeepers spent most of the time walking or standing. The total amount of shots to the goal was 6893, with a mean save percentage of 30% (2088 saves). A significant relationship was identified between the goalkeepers' save statistics and the final team rankings. The save rate is important for teams to achieve a higher ranking, and therefore the selection and training of goalkeepers requires more than just assessing physical abilities. The throwing distribution and success/save rate during the Qatar 2015 Men Handball World Championships suggest strong and weak parts of the goal area, and coaches can use this information to adjust their training approaches for both goalkeepers and shooters.

Adaptive model-predictive controller for magnetic resonance guided focused ultrasound therapy.

PubMed

de Bever, Joshua; Todd, Nick; Payne, Allison; Christensen, Douglas A; Roemer, Robert B

2014-11-01

Minimising treatment time and protecting healthy tissues are conflicting goals that play major roles in making magnetic resonance image-guided focused ultrasound (MRgFUS) therapies clinically practical. We have developed and tested in vivo an adaptive model-predictive controller (AMPC) that reduces treatment time, ensures safety and efficacy, and provides flexibility in treatment set-up. The controller realises time savings by modelling the heated treatment cell's future temperatures and thermal dose accumulation in order to anticipate the optimal time to switch to the next cell. Selected tissues are safeguarded by a configurable temperature constraint. Simulations quantified the time savings realised by each controller feature as well as the trade-offs between competing safety and treatment time parameters. In vivo experiments in rabbit thighs established the controller's effectiveness and reliability. In all in vivo experiments the target thermal dose of at least 240 CEM43 was delivered everywhere in the treatment volume. The controller's temperature safety limit reliably activated and constrained all protected tissues to <9 CEM43. Simulations demonstrated the path independence of the controller, and that a path which successively proceeds to the hottest untreated neighbouring cell leads to significant time savings, e.g. when compared to a concentric spiral path. Use of the AMPC produced a compounding time-saving effect; reducing the treatment cells' heating times concurrently reduced heating of normal tissues, which eliminated cooling periods. Adaptive model-predictive control can automatically deliver safe, effective MRgFUS treatments while significantly reducing treatment times.

A survey of personal digital assistant use in a sample of New Zealand doctors.

PubMed

Menzies, Oliver H; Thwaites, John

2012-03-30

To gather information about handheld computing hardware and software usage by hospital based doctors in New Zealand (NZ). An online tool (SurveyMonkey) was used to conduct the survey from 27 June to 10 September 2010. Distribution of the survey was via an email to all NZ District Health Boards (DHBs). There were 850 responses. About half of respondents (52%) used a personal digital assistant (PDA), 90% using it at least once daily. Usage varied greatly between DHBs (27-100%), perhaps related to institutional support. Among PDA users, the most common applications were the non-clinical; Scheduler (95%), Contacts (97%), and Tasks (83%). Users felt PDAs helped considerably with organisation and time saving. For non-users there were a range of barriers to usage, cost being a large factor. Another major barrier identified by both users and non-users was lack of organisational integration and support. Half of survey respondents used a PDA. PDA usage of responders from different DHBs varied considerably. Perceived barriers to PDA use included cost and lack of institutional support. A collaborative approach between clinical leadership and Information Technology teams to address barriers may result in increased utility and usage of PDAs in the NZ health system.

Change in the Classroom Deportment of Children Following Change From Daylight Saving Time.

ERIC Educational Resources Information Center

Hicks, Robert A.; And Others

1980-01-01

The deportment of each student in a third-grade classroom was rated by the teacher before and after the fall change from daylight savings time, to see if this disruption in circadian rhythms alters behavior. The deportment of boys improved significantly while the deportment of girls was significantly disrupted. (Author/SJL)

Save the World on Your Own Time

ERIC Educational Resources Information Center

Fish, Stanley

2008-01-01

What should be the role of our institutions of higher education? To promote good moral character? To bring an end to racism, sexism, economic oppression, and other social ills? To foster diversity and democracy and produce responsible citizens? In "Save the World On Your Own Time", Stanley Fish argues that, however laudable these goals might be,…

76 FR 71437 - Mutual Savings Association Advisory Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-17

... the public interest in order for the OCC to study the needs of and challenges facing mutual savings... for their time, but are eligible for reimbursement of travel expenses in accordance with applicable...

[The organizational benefits of the Kaizen approach at the Centre Hospitalier Universitaire de Sherbrooke (CHUS)].

PubMed

Comtois, Jonathan; Paris, Yvon; Poder, Thomas G; Chaussé, Sylvain

2013-01-01

The purpose of this study was to calculate the cost savings associated with using the kaizen approach in our hospital. Originally developed in Japan, the kaizen approach, based on the idea of continuous improvement, has considerable support in North America, including in the Quebec health care system. This study assessed the first fifteen kaizen projects at the CHUS. Based on an economic evaluation, we showed that using the kaizen approach can result in substantial cost savings. The success of the kaizen approach requires compliance with specific prerequisites. The future of the approach will depend on our ability to comply with these prerequisites. More specifically, such compliance will determine whether the approach is merely a passing fad or a strategy for improving our management style to promote greater efficiency.

Policy Framework for Covering Preventive Services Without Cost Sharing: Saving Lives and Saving Money?

PubMed

Chen, Stephanie C; Pearson, Steven D

2016-08-01

The US Affordable Care Act mandates that private insurers cover a list of preventive services without cost sharing. The list is determined by 4 expert committees that evaluate the overall health effect of preventive services. We analyzed the process by which the expert committees develop their recommendations. Each committee uses different criteria to evaluate preventive services and none of the committees consider cost systematically. We propose that the existing committees adopt consistent evidence review methodologies and expand the scope of preventive services reviewed and that a separate advisory committee be established to integrate economic considerations into the final selection of free preventive services. The comprehensive framework and associated criteria are intended to help policy makers in the future develop a more evidence-based, consistent, and ethically sound approach.

Comparison of in-situ delay monitors for use in Adaptive Voltage Scaling

NASA Astrophysics Data System (ADS)

Pour Aryan, N.; Heiß, L.; Schmitt-Landsiedel, D.; Georgakos, G.; Wirnshofer, M.

2012-09-01

In Adaptive Voltage Scaling (AVS) the supply voltage of digital circuits is tuned according to the circuit's actual operating condition, which enables dynamic compensation to PVTA variations. By exploiting the excessive safety margins added in state-of-the-art worst-case designs considerable power saving is achieved. In our approach, the operating condition of the circuit is monitored by in-situ delay monitors. This paper presents different designs to implement the in-situ delay monitors capable of detecting late but still non-erroneous transitions, called Pre-Errors. The developed Pre-Error monitors are integrated in a 16 bit multiplier test circuit and the resulting Pre-Error AVS system is modeled by a Markov chain in order to determine the power saving potential of each Pre-Error detection approach.

12 CFR 170.4 - Issuance of orders to correct deficiencies and to take or refrain from taking other actions.

Code of Federal Regulations, 2013 CFR

2013-01-01

...) Notice of intent to issue order—(1) In general. The OCC shall provide a Federal savings association prior written notice of the OCC's intention to issue an order requiring the savings association to correct a... the FDI Act. The savings association shall have such time to respond to a proposed order as provided...

12 CFR 170.4 - Issuance of orders to correct deficiencies and to take or refrain from taking other actions.

Code of Federal Regulations, 2014 CFR

2014-01-01

...) Notice of intent to issue order—(1) In general. The OCC shall provide a Federal savings association prior written notice of the OCC's intention to issue an order requiring the savings association to correct a... the FDI Act. The savings association shall have such time to respond to a proposed order as provided...

12 CFR 170.4 - Issuance of orders to correct deficiencies and to take or refrain from taking other actions.

Code of Federal Regulations, 2012 CFR

2012-01-01

...) Notice of intent to issue order—(1) In general. The OCC shall provide a Federal savings association prior written notice of the OCC's intention to issue an order requiring the savings association to correct a... the FDI Act. The savings association shall have such time to respond to a proposed order as provided...

Social Security and Saving: A Time-Series Econometrics Pedagogical Example (With "R" Code)

ERIC Educational Resources Information Center

Wassell, Charles S., Jr.

2018-01-01

In 1974, and then again in 1996, Martin Feldstein published studies of the impact of the Social Security system on private saving in the U.S. economy. He found that Social Security depressed personal saving by a substantial amount--up to 50 percent. The author uses the Feldstein data and empirical models in this article to illustrate the steps in…

USSR Report, Engineering and Equipment

DTIC Science & Technology

1987-01-22

savings were to be considerable: the designers and manufacturers promised an hourly output of almost twice that of the old conveyor . It is easy to...superficialities than with the effec- tiveness of their designs . NPO VTTIIlitmash transfers technical documentation for series production of new...accumulation of articles on the conveyor or when using a robot, transfer of articles from the conveyor to ceramic plates of the furnace for baking

Investment Savings Access After Catastrophes Act of 2013

THOMAS, 113th Congress

Rep. Cassidy, Bill [R-LA-6

2013-02-04

House - 02/04/2013 Referred to the Committee on Ways and Means, and in addition to the Committee on Appropriations, for a period to be subsequently determined by the Speaker, in each case for consideration of such provisions as fall within the jurisdiction of the committee concerned. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Computer analysis of effects of altering jet fuel properties on refinery costs and yields

NASA Technical Reports Server (NTRS)

Breton, T.; Dunbar, D.

1984-01-01

This study was undertaken to evaluate the adequacy of future U.S. jet fuel supplies, the potential for large increases in the cost of jet fuel, and to what extent a relaxation in jet fuel properties would remedy these potential problems. The results of the study indicate that refiners should be able to meet jet fuel output requirements in all regions of the country within the current Jet A specifications during the 1990-2010 period. The results also indicate that it will be more difficult to meet Jet A specifications on the West Coast, because the feedstock quality is worse and the required jet fuel yield (jet fuel/crude refined) is higher than in the East. The results show that jet fuel production costs could be reduced by relaxing fuel properties. Potential cost savings in the East (PADDs I-IV) through property relaxation were found to be about 1.3 cents/liter (5 cents/gallon) in January 1, 1981 dollars between 1990 and 2010. However, the savings from property relaxation were all obtained within the range of current Jet A specifications, so there is no financial incentive to relax Jet A fuel specifications in the East. In the West (PADD V) the potential cost savings from lowering fuel quality were considerably greater than in the East. Cost savings from 2.7 to 3.7 cents/liter (10-14 cents/gallon) were found. In contrast to the East, on the West Coast a significant part of the savings was obtained through relaxation of the current Jet A fuel specifications.

Freight Wing Trailer Aerodynamics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Graham, Sean; Bigatel, Patrick

2004-10-17

Freight Wing Incorporated utilized the opportunity presented by this DOE category one Inventions and Innovations grant to successfully research, develop, test, patent, market, and sell innovative fuel and emissions saving aerodynamic attachments for the trucking industry. A great deal of past scientific research has demonstrated that streamlining box shaped semi-trailers can significantly reduce a truck's fuel consumption. However, significant design challenges have prevented past concepts from meeting industry needs. Market research early in this project revealed the demands of truck fleet operators regarding aerodynamic attachments. Products must not only save fuel, but cannot interfere with the operation of the truck,more » require significant maintenance, add significant weight, and must be extremely durable. Furthermore, SAE/TMC J1321 tests performed by a respected independent laboratory are necessary for large fleets to even consider purchase. Freight Wing used this information to create a system of three practical aerodynamic attachments for the front, rear and undercarriage of standard semi trailers. SAE/TMC J1321 Type II tests preformed by the Transportation Research Center (TRC) demonstrated a 7% improvement to fuel economy with all three products. If Freight Wing is successful in its continued efforts to gain market penetration, the energy and environmental savings would be considerable. Each truck outfitted saves approximately 1,100 gallons of fuel every 100,000 miles, which prevents over 12 tons of CO2 from entering the atmosphere. If all applicable trailers used the technology, the country could save approximately 1.8 billion gallons of diesel fuel, 18 million tons of emissions and 3.6 billion dollars annually.« less

Value-based assessment of robotic pancreas and liver surgery

PubMed Central

Patti, James C.; Ore, Ana Sofia; Barrows, Courtney; Velanovich, Vic

2017-01-01

Current healthcare economic evaluations are based only on the perspective of a single stakeholder to the healthcare delivery process. A true value-based decision incorporates all of the outcomes that could be impacted by a single episode of surgical care. We define the value proposition for robotic surgery using a stakeholder model incorporating the interests of all groups participating in the provision of healthcare services: patients, surgeons, hospitals and payers. One of the developing and expanding fields that could benefit the most from a complete value-based analysis is robotic hepatopancreaticobiliary (HPB) surgery. While initial robot purchasing costs are high, the benefits over laparoscopic surgery are considerable. Performing a literature search we found a total of 18 economic evaluations for robotic HPB surgery. We found a lack of evaluations that were carried out from a perspective that incorporates all of the impacts of a single episode of surgical care and that included a comprehensive hospital cost assessment. For distal pancreatectomies, the two most thorough examinations came to conflicting results regarding total cost savings compared to laparoscopic approaches. The most thorough pancreaticoduodenectomy evaluation found non-significant savings for total hospital costs. Robotic hepatectomies showed no cost savings over laparoscopic and only modest savings over open techniques. Lastly, robotic cholecystectomies were found to be more expensive than the gold-standard laparoscopic approach. Existing cost accounting data associated with robotic HPB surgery is incomplete and unlikely to reflect the state of this field in the future. Current data combines the learning curves for new surgical procedures being undertaken by HPB surgeons with costs derived from a market dominated by a single supplier of robotic instruments. As a result, the value proposition for stakeholders in this process cannot be defined. In order to solve this problem, future studies must incorporate (I) quality of life, survival, and return to independent function alongside data such as (II) intent-to-treat analysis of minimally-invasive surgery accounting for conversions to open, (III) surgeon and institution experience and operative time as surrogates for the learning curve; and (IV) amortization and maintenance costs as well as direct costs of disposables and instruments. PMID:28848747

Value-based assessment of robotic pancreas and liver surgery.

PubMed

Patti, James C; Ore, Ana Sofia; Barrows, Courtney; Velanovich, Vic; Moser, A James

2017-08-01

Current healthcare economic evaluations are based only on the perspective of a single stakeholder to the healthcare delivery process. A true value-based decision incorporates all of the outcomes that could be impacted by a single episode of surgical care. We define the value proposition for robotic surgery using a stakeholder model incorporating the interests of all groups participating in the provision of healthcare services: patients, surgeons, hospitals and payers. One of the developing and expanding fields that could benefit the most from a complete value-based analysis is robotic hepatopancreaticobiliary (HPB) surgery. While initial robot purchasing costs are high, the benefits over laparoscopic surgery are considerable. Performing a literature search we found a total of 18 economic evaluations for robotic HPB surgery. We found a lack of evaluations that were carried out from a perspective that incorporates all of the impacts of a single episode of surgical care and that included a comprehensive hospital cost assessment. For distal pancreatectomies, the two most thorough examinations came to conflicting results regarding total cost savings compared to laparoscopic approaches. The most thorough pancreaticoduodenectomy evaluation found non-significant savings for total hospital costs. Robotic hepatectomies showed no cost savings over laparoscopic and only modest savings over open techniques. Lastly, robotic cholecystectomies were found to be more expensive than the gold-standard laparoscopic approach. Existing cost accounting data associated with robotic HPB surgery is incomplete and unlikely to reflect the state of this field in the future. Current data combines the learning curves for new surgical procedures being undertaken by HPB surgeons with costs derived from a market dominated by a single supplier of robotic instruments. As a result, the value proposition for stakeholders in this process cannot be defined. In order to solve this problem, future studies must incorporate (I) quality of life, survival, and return to independent function alongside data such as (II) intent-to-treat analysis of minimally-invasive surgery accounting for conversions to open, (III) surgeon and institution experience and operative time as surrogates for the learning curve; and (IV) amortization and maintenance costs as well as direct costs of disposables and instruments.

How rebates, copayments, and administration costs affect the cost-effectiveness of osteoporosis therapies.

PubMed

Ferko, Nicole C; Borisova, Natalie; Airia, Parisa; Grima, Daniel T; Thompson, Melissa F

2012-11-01

Because of rising drug expenditures, cost considerations have become essential, necessitating the requirement for cost-effectiveness analyses for managed care organizations (MCOs). The study objective is to examine the impact of various drug-cost components, in addition to wholesale acquisition cost (WAC), on the cost-effectiveness of osteoporosis therapies. A Markov model of osteoporosis was used to exemplify different drug cost scenarios. We examined the effect of varying rebates for oral bisphosphonates--risedronate and ibandronate--as well as considering the impact of varying copayments and administration costs for intravenous zoledronate. The population modeled was 1,000 American women, > or = 50 years with osteoporosis. Patients were followed for 1 year to reflect an annual budget review of formularies by MCOs. The cost of therapy was based on an adjusted WAC, and is referred to as net drug cost. The total annual cost incurred by an MCO for each drug regimen was calculated using the net drug cost and fracture cost. We estimated cost on a quality adjusted life year (QALY) basis. When considering different rebates, results for risedronate versus ibandronate vary from cost-savings (i.e., costs less and more effective) to approximately $70,000 per QALY. With no risedronate rebate, an ibandronate rebate of approximately 65% is required before cost per QALY surpasses $50,000. With rebates greater than 25% for risedronate, irrespective of ibandronate rebates, results become cost-saving. Results also showed the magnitude of cost savings to the MCO varied by as much as 65% when considering no administration cost and the highest coinsurance rate for zoledronate. Our study showed that cost-effectiveness varies considerably when factors in addition to the WAC are considered. This paper provides recommendations for pharmaceutical manufacturers and MCOs when developing and interpreting such analyses.

Simple Myths and Basic Maths about Greening Irrigation

NASA Astrophysics Data System (ADS)

Dionisio Pérez-Blanco, C.; Gómez, C. Mario

2014-05-01

Managing water is a very complex societal issue that needs to involve legal, environmental, technological, financial and political considerations that are difficult to co-ordinate in an effective manner. This complexity and the lack of an agreed assessment framework have often implied that political decisions, largely driven by transaction costs (especially the bargaining costs required to come to an acceptable agreement with all the parties involved), have overshadowed and prevailed over other considerations. As a result, (financially) expensive solutions such as irrigation modernization programmes have been preferred to their inexpensive alternatives to save water, such as quotas or pricing policies. However, greening the economy is mostly about improving water governance and not only about putting the existing resource saving technical alternatives into practice. Focusing on the second and forgetting the first risks finishing with a highly efficient use of water services at the level of each individual user but with an unsustainable amount of water use for the entire economy. This might be happening already in many places with the modernization of irrigated agriculture, the world's largest water user and the one offering the most promising water saving opportunities. In spite of high expectations, costly modern irrigation techniques seem not to be contributing to reduce water scarcity and increase drought resiliency. In fact, according to the little evidence available, in some areas they are resulting in higher water use. Building on basic economic principles this study aims to show the conditions under which this apparently paradoxical outcome, known as the Jevons' Paradox, might appear. This basic model is expected to serve as guidance for assessing the actual outcomes of increasing irrigation efficiency and to discuss the changes in water governance that would be required for this to make a real contribution to sustainable water management.

Synthesized Attributes of Water Use by Regional Vegetation: A Key to Cognition of “Water Pump” Viewpoint

PubMed Central

Huang, Xin-hui; Yu, Fu-ke; Li, Xiao-ying; Zheng, Yuan; Yuan, Hua; Ma, Jian-gang; Wang, Yan-xia; Qi, Dan-hui; Shao, Hong-bo

2014-01-01

Recently, the frequent seasonal drought in Southwest China has brought considerable concerns and continuous heated arguments on the “water pump” viewpoint (i.e., the water demand from Hevea spp. and Eucalyptus spp. can be treated as a water pump) once again. However, such viewpoint just focused on water consumption from vegetation transpiration and its ecoenvironment impacts, which had not considered other attributes of vegetation, namely, water saving and drought resistance, and hydrological regulation (water conservation) into consideration. Thus, in this paper, the synthesized attributes of regional vegetation water use had been mainly discussed. The results showed that the study on such aspects as the characters of water consumption from vegetation transpiration, the potential of water saving and drought resistance, and the effects of hydrological regulation in Southwest China lagged far behind, let alone the report on synthesized attributes of water utilization with the organic combination of the three aspects above or the paralleled analysis. Accordingly, in this paper, the study on the synthesized attributes of water use by regional vegetation in Southwest China was suggested, and the objectives of such a special study were clarified, targeting the following aspects: (i) characters of water consumption from transpiration of regional typical artificial vegetation; (ii) potential of water saving and drought resistance of regional typical artificial vegetation; (iii) effects of hydrological regulation of regional typical artificial vegetation; (iv) synthesized attributes of water use by regional typical artificial vegetation. It is expected to provide a new idea for the scientific assessment on the regional vegetation ecoenvironment effects and theoretical guidance for the regional vegetation reconstruction and ecological restoration. PMID:25302337

Synthesized attributes of water use by regional vegetation: a key to cognition of "water pump" viewpoint.

PubMed

Huang, Xin-hui; Yu, Fu-ke; Li, Xiao-ying; Zheng, Yuan; Yuan, Hua; Ma, Jian-gang; Wang, Yan-xia; Qi, Dan-hui; Shao, Hong-bo

2014-01-01

Recently, the frequent seasonal drought in Southwest China has brought considerable concerns and continuous heated arguments on the "water pump" viewpoint (i.e., the water demand from Hevea spp. and Eucalyptus spp. can be treated as a water pump) once again. However, such viewpoint just focused on water consumption from vegetation transpiration and its ecoenvironment impacts, which had not considered other attributes of vegetation, namely, water saving and drought resistance, and hydrological regulation (water conservation) into consideration. Thus, in this paper, the synthesized attributes of regional vegetation water use had been mainly discussed. The results showed that the study on such aspects as the characters of water consumption from vegetation transpiration, the potential of water saving and drought resistance, and the effects of hydrological regulation in Southwest China lagged far behind, let alone the report on synthesized attributes of water utilization with the organic combination of the three aspects above or the paralleled analysis. Accordingly, in this paper, the study on the synthesized attributes of water use by regional vegetation in Southwest China was suggested, and the objectives of such a special study were clarified, targeting the following aspects: (i) characters of water consumption from transpiration of regional typical artificial vegetation; (ii) potential of water saving and drought resistance of regional typical artificial vegetation; (iii) effects of hydrological regulation of regional typical artificial vegetation; (iv) synthesized attributes of water use by regional typical artificial vegetation. It is expected to provide a new idea for the scientific assessment on the regional vegetation ecoenvironment effects and theoretical guidance for the regional vegetation reconstruction and ecological restoration.

Effect of savings-led economic empowerment on HIV preventive practices among orphaned adolescents in rural Uganda: results from the Suubi-Maka randomized experiment

PubMed Central

Jennings, Larissa; Ssewamala, Fred M.; Nabunya, Proscovia

2015-01-01

Improving economic resources of impoverished youth may alter intentions to engage in sexual risk behaviors by motivating positive future planning to avoid HIV risk and by altering economic contexts contributing to HIV risk. Yet, few studies have examined the effect of economic-strengthening on economic and sexual behaviors of orphaned youth, despite high poverty and high HIV infection in this population. Hierarchal longitudinal regressions were used to examine the effect of a savings-led economic empowerment intervention, the Suubi-Maka Project, on changes in orphaned adolescents’ cash savings and attitudes toward savings and HIV-preventive practices over time. We randomized 346 Ugandan adolescents, aged 10–17 years, to either the control group receiving usual orphan care plus mentoring (n = 167) or the intervention group receiving usual orphan care plus mentoring, financial education, and matched savings accounts (n = 179). Assessments were conducted at baseline, 12, and 24 months. Results indicated that intervention adolescents significantly increased their cash savings over time (b = $US12.32, ±1.12, p < .001) compared to adolescents in the control group. At 24 months post-baseline, 92% of intervention adolescents had accumulated savings compared to 43% in the control group (p < .001). The largest changes in savings goals were the proportion of intervention adolescents valuing saving for money to buy a home (ΔT1−T0 = +14.9, p < .001), pursue vocational training (ΔT1−T0 = +8.8, p < .01), and start a business (T1−T0 = +6.7, p < .01). Intervention adolescents also had a significant relative increase over time in HIV-preventive attitudinal scores (b = +0.19, ±0.09, p < .05), most commonly toward perceived risk of HIV (95.8%, n = 159), sexual abstinence or postponement (91.6%, n = 152), and consistent condom use (93.4%, n = 144). In addition, intervention adolescents had 2.017 significantly greater odds of a maximum HIV-prevention score (OR = 2.017, 95%CI: 1.43–2.84). To minimize HIV risk throughout the adolescent and young adult periods, long-term strategies are needed to integrate youth economic development, including savings and income generation, with age-appropriate combination prevention interventions. PMID:26548549

Navigation API Route Fuel Saving Opportunity Assessment on Large-Scale Real-World Travel Data for Conventional Vehicles and Hybrid Electric Vehicles: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhu, Lei; Holden, Jacob; Gonder, Jeffrey D

The green routing strategy instructing a vehicle to select a fuel-efficient route benefits the current transportation system with fuel-saving opportunities. This paper introduces a navigation API route fuel-saving evaluation framework for estimating fuel advantages of alternative API routes based on large-scale, real-world travel data for conventional vehicles (CVs) and hybrid electric vehicles (HEVs). The navigation APIs, such Google Directions API, integrate traffic conditions and provide feasible alternative routes for origin-destination pairs. This paper develops two link-based fuel-consumption models stratified by link-level speed, road grade, and functional class (local/non-local), one for CVs and the other for HEVs. The link-based fuel-consumption modelsmore » are built by assigning travel from a large number of GPS driving traces to the links in TomTom MultiNet as the underlying road network layer and road grade data from a U.S. Geological Survey elevation data set. Fuel consumption on a link is calculated by the proposed fuel consumption model. This paper envisions two kinds of applications: 1) identifying alternate routes that save fuel, and 2) quantifying the potential fuel savings for large amounts of travel. An experiment based on a large-scale California Household Travel Survey GPS trajectory data set is conducted. The fuel consumption and savings of CVs and HEVs are investigated. At the same time, the trade-off between fuel saving and time saving for choosing different routes is also examined for both powertrains.« less

How to Create a Personal Health Record

MedlinePlus

... learned that a PHR saves time, energy, and money. And it saved my life! A woman's Facebook ... Doctor’s Visit A Reference Guide Blue Button Resources Mobile PHRs Blog FAQ © 2018 AHIMA, All Rights Reserved | ...

A properly adjusted forage harvester can save time and money

USDA-ARS?s Scientific Manuscript database

A properly adjusted forage harvester can save fuel and increase the realizable milk per ton of your silage. This article details the adjustments necessary to minimize energy while maximizing productivity and forage quality....

31 CFR 360.12 - Disposition of excess.

Code of Federal Regulations, 2010 CFR

2010-07-01

... STATES SAVINGS BONDS, SERIES I Limitations on Annual Purchases § 360.12 Disposition of excess. If any person at any time has savings bonds issued during any one calendar year in excess of the prescribed...

31 CFR 360.12 - Disposition of excess.

Code of Federal Regulations, 2014 CFR

2014-07-01

... STATES SAVINGS BONDS, SERIES I Limitations on Annual Purchases § 360.12 Disposition of excess. If any person at any time has savings bonds issued during any one calendar year in excess of the prescribed...

31 CFR 353.12 - Disposition of excess.

Code of Federal Regulations, 2013 CFR

2013-07-01

... STATES SAVINGS BONDS, SERIES EE AND HH Limitations on Annual Purchases § 353.12 Disposition of excess. If any person at any time has savings bonds issued during any one calendar year in excess of the...

31 CFR 353.12 - Disposition of excess.

Code of Federal Regulations, 2014 CFR

2014-07-01

... STATES SAVINGS BONDS, SERIES EE AND HH Limitations on Annual Purchases § 353.12 Disposition of excess. If any person at any time has savings bonds issued during any one calendar year in excess of the...

31 CFR 353.12 - Disposition of excess.

Code of Federal Regulations, 2010 CFR

2010-07-01

... STATES SAVINGS BONDS, SERIES EE AND HH Limitations on Annual Purchases § 353.12 Disposition of excess. If any person at any time has savings bonds issued during any one calendar year in excess of the...

31 CFR 360.12 - Disposition of excess.

Code of Federal Regulations, 2013 CFR

2013-07-01

... STATES SAVINGS BONDS, SERIES I Limitations on Annual Purchases § 360.12 Disposition of excess. If any person at any time has savings bonds issued during any one calendar year in excess of the prescribed...

Use of models to map potential capture of surface water

USGS Publications Warehouse

Leake, Stanley A.

2006-01-01

The effects of ground-water withdrawals on surface-water resources and riparian vegetation have become important considerations in water-availability studies. Ground water withdrawn by a well initially comes from storage around the well, but with time can eventually increase inflow to the aquifer and (or) decrease natural outflow from the aquifer. This increased inflow and decreased outflow is referred to as “capture.” For a given time, capture can be expressed as a fraction of withdrawal rate that is accounted for as increased rates of inflow and decreased rates of outflow. The time frames over which capture might occur at different locations commonly are not well understood by resource managers. A ground-water model, however, can be used to map potential capture for areas and times of interest. The maps can help managers visualize the possible timing of capture over large regions. The first step in the procedure to map potential capture is to run a ground-water model in steady-state mode without withdrawals to establish baseline total flow rates at all sources and sinks. The next step is to select a time frame and appropriate withdrawal rate for computing capture. For regional aquifers, time frames of decades to centuries may be appropriate. The model is then run repeatedly in transient mode, each run with one well in a different model cell in an area of interest. Differences in inflow and outflow rates from the baseline conditions for each model run are computed and saved. The differences in individual components are summed and divided by the withdrawal rate to obtain a single capture fraction for each cell. Values are contoured to depict capture fractions for the time of interest. Considerations in carrying out the analysis include use of realistic physical boundaries in the model, understanding the degree of linearity of the model, selection of an appropriate time frame and withdrawal rate, and minimizing error in the global mass balance of the model.

Estimating the Energy, Demand and Cost Savings from a Geothermal Heat Pump ESPC Project at Fort Polk, LA Through Utility Bill Analysis.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shonder, John A; Hughes, Patrick

2006-01-01

Energy savings performance contracts (ESPCs) are a method of financing energy conservation projects using the energy cost savings generated by the conservation measures themselves. Ideally, reduced energy costs are visible as reduced utility bills, but in fact this is not always the case. On large military bases, for example, a single electric meter typically covers hundreds of individual buildings. Savings from an ESPC involving only a small number of these buildings will have little effect on the overall utility bill. In fact, changes in mission, occupancy, and energy prices could cause substantial increases in utility bills. For this reason, other,more » more practical, methods have been developed to measure and verify savings in ESPC projects. Nevertheless, increasing utility bills--when ESPCs are expected to be reducing them--are problematic and can lead some observers to question whether savings are actually being achieved. In this paper, the authors use utility bill analysis to determine energy, demand, and cost savings from an ESPC project that installed geothermal heat pumps in the family housing areas of the military base at Fort Polk, Louisiana. The savings estimates for the first year after the retrofits were found to be in substantial agreement with previous estimates that were based on submetered data. However, the utility bills also show that electrical use tended to increase as time went on. Since other data show that the energy use in family housing has remained about the same over the period, the authors conclude that the savings from the ESPC have persisted, and increases in electrical use must be due to loads unassociated with family housing. This shows that under certain circumstances, and with the proper analysis, utility bills can be used to estimate savings from ESPC projects. However, these circumstances are rare and over time the comparison may be invalidated by increases in energy use in areas unaffected by the ESPC.« less

Architectural Analysis of Complex Evolving Systems of Systems

NASA Technical Reports Server (NTRS)

Lindvall, Mikael; Stratton, William C.; Sibol, Deane E.; Ray, Arnab; Ackemann, Chris; Yonkwa, Lyly; Ganesan, Dharma

2009-01-01

The goal of this collaborative project between FC-MD, APL, and GSFC and supported by NASA IV&V Software Assurance Research Program (SARP), was to develop a tool, Dynamic SAVE, or Dyn-SAVE for short, for analyzing architectures of systems of systems. The project team was comprised of the principal investigator (PI) from FC-MD and four other FC-MD scientists (part time) and several FC-MD students (full time), as well as, two APL software architects (part time), and one NASA POC (part time). The PI and FC-MD scientists together with APL architects were responsible for requirements analysis, and for applying and evaluating the Dyn-SAVE tool and method. The PI and a group of FC-MD scientists were responsible for improving the method and conducting outreach activities, while another group of FC-MD scientists were responsible for development and improvement of the tool. Oversight and reporting was conducted by the PI and NASA POC. The project team produced many results including several prototypes of the Dyn-SAVE tool and method, several case studies documenting how the tool and method was applied to APL s software systems, and several published papers in highly respected conferences and journals. Dyn-SAVE as developed and enhanced throughout this research period, is a software tool intended for software developers and architects, software integration testers, and persons who need to analyze software systems from the point of view of how it communicates with other systems. Using the tool, the user specifies the planned communication behavior of the system modeled as a sequence diagram. The user then captures and imports the actual communication behavior of the system, which is then converted and visualized as a sequence diagram by Dyn-SAVE. After mapping the planned to the actual and specifying parameter and timing constraints, Dyn-SAVE detects and highlights deviations between the planned and the actual behavior. Requirements based on the need to analyze two inter-system communication protocols that are representative of protocols used in the Aerospace industry have been specified. The protocols are related: APL s Common Ground System (CGS) as used in the MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) and the Radiation Belt Space Probes (RBSP) missions. The analyzed communications were implementations of the Telemetry protocol and the CCSDS File Delivery Protocol (CFDP) protocol. Based on these requirements, three prototypes of Dyn-SAVE were developed and applied to these protocols. The application of Dyn-SAVE to these protocols resulted in the detection of several issues. Dyn-SAVE was also applied to several Testbeds that have previously been used for experimentation earlier on this project, as well as, to other protocols and logs for testing its broader applicability. For example, Dyn-SAVE was used to analyze 1) the communication pattern between a web browser and a web server, 2) the system log of a computer in order to detect offnominal computer shut-down behavior, and 3) the actual test cases of NASA Goddard s Core Flight System (CFS) and automatically generated test cases in order to determine the overlap between the two sets of test cases. In all cases, Dyn-SAVE assisted in providing insightful conclusions about each of the cases identified above.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steffen, Jason H.; Hotchkiss, Jon

We report the results of an experimental comparison of different airplane boarding methods. This test was conducted in a mock 757 fuselage, located on a Southern California soundstage, with 12 rows of six seats and a single aisle. Five methods were tested using 72 passengers of various ages. We found a significant reduction in the boarding times of optimized methods over traditional methods. These improved methods, if properly implemented, could result in a significant savings to airline companies. The process of boarding an airplane is of interest to a variety of groups. The public is interested both as a curiosity,more » as it is something that they may regularly experience, and as a consumer, as their experiences good or bad can affect their loyalties. Airline companies and their employees also have a stake in an efficient boarding procedure as time saved in the boarding process may result is monetary savings, in the quality of interactions with passengers, and in the application of human resources to the general process of preparing an airplane for departure. A recent study (Nyquist and McFadden, 2008) indicates that the average cost to an airline company for each minute of time spent at the terminal is roughly $30. Thus, each minute saved in the turn-around time of a flight has the potential to generate over $16,000,000 in annual savings (assuming an average of 1500 flights per day). While the boarding process may not be the primary source of delay in returning an airplane to the skies, reducing the boarding time may effectively eliminate passenger boarding as a contributor in any meaningful measure. Consequently, subsequent efforts to streamline the other necessary tasks, such as refueling and maintenance, would be rewarded with a material reduction in time at the gate for each flight.« less

Experimental test of airplane boarding methods

DOE PAGES

Steffen, Jason H.; Hotchkiss, Jon

2011-10-26

We report the results of an experimental comparison of different airplane boarding methods. This test was conducted in a mock 757 fuselage, located on a Southern California soundstage, with 12 rows of six seats and a single aisle. Five methods were tested using 72 passengers of various ages. We found a significant reduction in the boarding times of optimized methods over traditional methods. These improved methods, if properly implemented, could result in a significant savings to airline companies. The process of boarding an airplane is of interest to a variety of groups. The public is interested both as a curiosity,more » as it is something that they may regularly experience, and as a consumer, as their experiences good or bad can affect their loyalties. Airline companies and their employees also have a stake in an efficient boarding procedure as time saved in the boarding process may result is monetary savings, in the quality of interactions with passengers, and in the application of human resources to the general process of preparing an airplane for departure. A recent study (Nyquist and McFadden, 2008) indicates that the average cost to an airline company for each minute of time spent at the terminal is roughly $30. Thus, each minute saved in the turn-around time of a flight has the potential to generate over $16,000,000 in annual savings (assuming an average of 1500 flights per day). While the boarding process may not be the primary source of delay in returning an airplane to the skies, reducing the boarding time may effectively eliminate passenger boarding as a contributor in any meaningful measure. Consequently, subsequent efforts to streamline the other necessary tasks, such as refueling and maintenance, would be rewarded with a material reduction in time at the gate for each flight.« less

Chinese hotel general managers' perspectives on energy-saving practices

NASA Astrophysics Data System (ADS)

Zhu, Yidan

As hotels' concern about sustainability and budget-control is growing steadily, energy-saving issues have become one of the important management concerns hospitality industry face. By executing proper energy-saving practices, previous scholars believed that hotel operation costs can decrease dramatically. Moreover, they believed that conducting energy-saving practices may eventually help the hotel to gain other benefits such as an improved reputation and stronger competitive advantage. The energy-saving issue also has become a critical management problem for the hotel industry in China. Previous research has not investigated energy-saving in China's hotel segment. To achieve a better understanding of the importance of energy-saving, this document attempts to present some insights into China's energy-saving practices in the tourist accommodations sector. Results of the study show the Chinese general managers' attitudes toward energy-saving issues and the differences among the diverse hotel managers who responded to the study. Study results indicate that in China, most of the hotels' energy bills decrease due to the implementation of energy-saving equipments. General managers of hotels in operation for a shorter period of time are typically responsible for making decisions about energy-saving issues; older hotels are used to choosing corporate level concerning to this issue. Larger Chinese hotels generally have official energy-saving usage training sessions for employees, but smaller Chinese hotels sometimes overlook the importance of employee training. The study also found that for the Chinese hospitality industry, energy-saving practices related to electricity are the most efficient and common way to save energy, but older hotels also should pay attention to other ways of saving energy such as water conservation or heating/cooling system.

Computer Simulations Improve University Instructional Laboratories1

PubMed Central

2004-01-01

Laboratory classes are commonplace and essential in biology departments but can sometimes be cumbersome, unreliable, and a drain on time and resources. As university intakes increase, pressure on budgets and staff time can often lead to reduction in practical class provision. Frequently, the ability to use laboratory equipment, mix solutions, and manipulate test animals are essential learning outcomes, and “wet” laboratory classes are thus appropriate. In others, however, interpretation and manipulation of the data are the primary learning outcomes, and here, computer-based simulations can provide a cheaper, easier, and less time- and labor-intensive alternative. We report the evaluation of two computer-based simulations of practical exercises: the first in chromosome analysis, the second in bioinformatics. Simulations can provide significant time savings to students (by a factor of four in our first case study) without affecting learning, as measured by performance in assessment. Moreover, under certain circumstances, performance can be improved by the use of simulations (by 7% in our second case study). We concluded that the introduction of these simulations can significantly enhance student learning where consideration of the learning outcomes indicates that it might be appropriate. In addition, they can offer significant benefits to teaching staff. PMID:15592599

Urban Telemedicine: The Applicability of Teleburns in the Rehabilitative Phase.

PubMed

Liu, Yuk Ming; Mathews, Katie; Vardanian, Andrew; Bozkurt, Taylan; Schneider, Jeffrey C; Hefner, Jaye; Schulz, John T; Fagan, Shawn P; Goverman, Jeremy

Telemedicine has been successfully used in many areas of medicine, including triage and evaluation of the acute burn patient. The utility of telemedicine during the rehabilitative phase of burn care has yet to be evaluated; therefore, we expanded our telemedicine program to link our burn center with a rehabilitation facility. The goal of this project was to demonstrate cost-effective improvements in the transition and quality of care. A retrospective review was performed on all patients enrolled in our telemedicine/rehabilitation program between March 2013 and March 2014. Data collected included total number of encounters, visits, type of visit, physician time, and readmissions. Transportation costs were based on local ambulance rates between the two facilities. The impact of telemedicine was evaluated with respect to the time saved for the physician, burn center, and burn clinic, as well as rehabilitative days saved. A patient satisfaction survey was also administered. A total of 29 patients participated in 73 virtual visits through the telemedicine project. Virtual visits included new consults, preoperative evaluations, and postoperative follow-ups. A total of 146 ambulance transports were averted during the study period, totaling $101,110. Virtual visits saved 6.8 outpatient burn clinic days, or 73 clinic appointments of 30-min duration. The ability to perform more outpatient surgery resulted in 80 inpatient bed days saved at the burn hospital. The rehabilitation hospital saved an average of 2 to 3 patient days secondary to unnecessary travel. Satisfaction surveys demonstrated patient satisfaction with the encounters, primarily related to time saved. The decrease in travel time for the patient from the rehabilitation hospital to outpatient burn clinic improved adherence to the rehabilitation care plan and resulted in increased throughput at the rehabilitation facility. Videoconferencing between a burn center and rehabilitation hospital streamlined patient care and reduced health care costs, while maintaining quality of care and patient satisfaction. This program has improved inpatient burn rehabilitation by maximizing time spent in therapy and avoiding unnecessary patient travel to offsite appointments.

[Global MED-NET].

PubMed

Slatina, E

2000-01-01

This poster will show a concept as well as some practical solutions for the database which is intended to be used by all members and institutions of the Emergency Medical Care international institutions network. This poster shows how data is automatically processed in a rapid and good quality way, while in the same time the lives are saved and time and money are saved too.

Assessing Your Assets: Systems for Tracking and Managing IT Assets Can Save Time and Dollars

ERIC Educational Resources Information Center

Holub, Patricia A.

2007-01-01

The average school district loses more than $80,000 per year because of lost or damaged IT assets, according to a QED survey cosponsored by Follett Software Company. And many districts--59 percent--still use manual systems to track assets. Enter asset management systems. Software for managing assets, when implemented properly, can save time,…

31 CFR 315.35 - Payment (redemption).

Code of Federal Regulations, 2014 CFR

2014-07-01

... and Savings Notes. A Series E bond will be paid at any time after two months from issue date at the... time after six (6) months from issue date. In any case where Series H bonds are surrendered to a..., SERIES A, B, C, D, E, F, G, H, J, AND K, AND U.S. SAVINGS NOTES General Provisions for Payment § 315.35...

Implementation and evaluation of an automated dispensing system.

PubMed

Schwarz, H O; Brodowy, B A

1995-04-15

An institution's experience in replacing a traditional unit dose cassette-exchange system with an automated dispensing system is described. A 24-hour unit dose cassette-exchange system was replaced with an automated dispensing system (Pyxis's Medstation Rx) on a 36-bed cardiovascular surgery unit and an 8-bed cardiovascular intensive care unit. Significantly fewer missing doses were reported after Medstation Rx was implemented. No conclusions could be made about the impact of the system on the reporting of medication errors. The time savings for pharmacy associated with the filling, checking, and delivery of new medication orders equated to about 0.5 full-time equivalent (FTE). Medstation Rx also saved substantial nursing time for acquisition of controlled substances and for controlled-substance inventory taking at shift changes. A financial analysis showed that Medstation Rx could save the institution about $1 million over five years if all personnel time savings could be translated into FTE reductions. The automated system was given high marks by the nurses in a survey; 80% wanted to keep the system on their unit. Pilot implementation of an automated dispensing system improved the efficiency of drug distribution over that of the traditional unit dose cassette-exchange system.

Cost analysis of school-based intermittent screening and treatment of malaria in Kenya

PubMed Central

2011-01-01

Background The control of malaria in schools is receiving increasing attention, but there remains currently no consensus as to the optimal intervention strategy. This paper analyses the costs of intermittent screening and treatment (IST) of malaria in schools, implemented as part of a cluster-randomized controlled trial on the Kenyan coast. Methods Financial and economic costs were estimated using an ingredients approach whereby all resources required in the delivery of IST are quantified and valued. Sensitivity analysis was conducted to investigate how programme variation affects costs and to identify potential cost savings in the future implementation of IST. Results The estimated financial cost of IST per child screened is US$ 6.61 (economic cost US$ 6.24). Key contributors to cost were salary costs (36%) and malaria rapid diagnostic tests (RDT) (22%). Almost half (47%) of the intervention cost comprises redeployment of existing resources including health worker time and use of hospital vehicles. Sensitivity analysis identified changes to intervention delivery that can reduce programme costs by 40%, including use of alternative RDTs and removal of supervised treatment. Cost-effectiveness is also likely to be highly sensitive to the proportion of children found to be RDT-positive. Conclusion In the current context, school-based IST is a relatively expensive malaria intervention, but reducing the complexity of delivery can result in considerable savings in the cost of intervention. (Costs are reported in US$ 2010). PMID:21933376

Practical Issues in Delivery of Clinician-to-Patient Telemental Health in an Academic Medical Center.

PubMed

Abrams, Jessica; Sossong, Sarah; Schwamm, Lee H; Barsanti, Lauren; Carter, Michael; Kling, Naomi; Kotarski, Meghan; Leddy, Jaclyn; Meller, Benjamin; Simoni, Marcy; Sullivan, Michael; Wozniak, Janet

In the age of online communication, psychiatric care can now be provided via videoconferencing technologies. While virtual visits as a part of telepsychiatry and telemental health provide a highly efficient and beneficial modality of care, the implementation of virtual visits requires attention to quality and safety issues. As practitioners continue to utilize this technology, issues of clinician licensing, treatment outcomes of virtual visits versus in-person visits, and cost offset require ongoing study. This review provides an overview of the topics of technology, legal and regulatory issues, clinical issues, and cost savings as they relate to practicing psychiatry and psychology via virtual visits in an academic medical center. We review the telepsychiatry/telemental health effectiveness literature from 2013 to the present. Our literature searches used the following terms: telemental health effective, telepsychiatry effective, telepsychiatry efficacy, and telemental health efficacy. These searches produced 58 articles, reduced to 16 when including only articles that address effectiveness of clinician-to-patient services. The technological, legal, and regulatory issues vary from state to state and over time. The emerging research addressing diverse populations and disorders provides strong evidence for the effectiveness of telepsychiatry. Cost savings are difficult to precisely determine and depend on the scope of the cost and benefit measured. Establishing a telepsychiatry program requires a comprehensive approach with up-to-date legal and technological considerations.

Bim for Cultural Heritage

NASA Astrophysics Data System (ADS)

Del Giudice, M.; Osello, A.

2013-07-01

When you think about the Architecture, Engineering and Construction (AEC) Industry people tend to refers to new buildings, but nowadays the recovery of existing ones is increasingly the subject of the research. The current historical context raises this issue at the center of numerous thought due both to economic and environmental conditions. So, the need to refurbish the cultural heritage is becoming more important than the construction of new buildings. Modern technologies allow professionals to do this to turn the buildings into structures capable to meet the users' confort with a considerable energy saving. Italy is trying to make a change to the construction industry through the national InnovANCE project, which aims to develop the first national database able to share information among professionals through the help of Building Information Modeling (BIM). In this way the subject involved in a construction process can update their way of working, with a consequent time and cost saving. This paper aims to present the way in which the InnovANCE project can be considered as the key for Italy to change the way to conceive the building industry, using a case study such as the old thermal power of Politecnico di Torino, starting from the survey step. The methodology followed to obtain the 3D model will be described, starting from the data of a topographic and a laser scanner survey and from an archival documents research.

Self-monitoring induced savings on type 2 diabetes patients' travel and healthcare costs.

PubMed

Leminen, Aapeli; Tykkyläinen, Markku; Laatikainen, Tiina

2018-07-01

Type 2 diabetes (T2DM) is a major health concern in most regions. In addition to direct healthcare costs, diabetes causes many indirect costs that are often ignored in economic analyses. Patients' travel and time costs associated with the follow-up of T2DM patients have not been previously calculated systematically over an entire healthcare district. The aim of the study was to develop a georeferenced cost model that could be used to measure healthcare accessibility and patient travel and time costs in a sparsely populated healthcare district in Finland. Additionally, the model was used to test whether savings in the total costs of follow-up of T2DM patients are achieved by increasing self-monitoring and implementing electronic feedback practices between healthcare staff and patients. Patient data for this study was obtained from the regional electronic patient database Mediatri. A georeferenced cost model of linear equations was developed with ESRI ArcGIS 10.3 software and ModelBuilder tool. The Model utilizes OD Cost Matrix method of network analysis to calculate optimal routes for primary-care follow-up visits. In the study region of North Karelia, the average annual total costs of T2DM follow-up screening of HbA1c (9070 patients) conforming to the national clinical guidelines are 280 EUR/297 USD per patient. Combined travel and time costs are 21 percent of the total costs. Implementing self-monitoring for a half of the follow-up still within the guidelines, the average annual total costs of HbA1c screening could be reduced by 57 percent from 280 EUR/297 USD to 121 EUR/129 USD per patient. Travel costs related to HbA1c screening of T2DM patients constitute a substantial cost item, the consideration of which in healthcare planning would enable the societal cost-efficiency of T2DM care to be improved. Even more savings in both travel costs and healthcare costs of T2DM can be achieved by utilizing more self-monitoring and electronic feedback practices. Additionally, the cost model composed in the study can be developed and expanded further to address other healthcare processes and patient groups. Copyright © 2018 The Authors. Published by Elsevier B.V. All rights reserved.

Community Savings Groups, Financial Security, and HIV Risk Among Female Sex Workers in Iringa, Tanzania.

PubMed

Mantsios, Andrea; Galai, Noya; Mbwambo, Jessie; Likindikoki, Samuel; Shembilu, Catherine; Mwampashi, Ard; Beckham, S W; Leddy, Anna; Davis, Wendy; Sherman, Susan; Kennedy, Caitlin; Kerrigan, Deanna

2018-02-24

This study assessed the association between community savings group participation and consistent condom use (CCU) among female sex workers (FSW) in Iringa, Tanzania. Using cross-sectional data from a survey of venue-based FSW (n = 496), logistic regression was used to examine the associations between financial indicators including community savings group participation and CCU. Over one-third (35%) of the women participated in a savings group. Multivariable regression results indicated that participating in a savings group was significantly associated with nearly two times greater odds of CCU with new clients in the last 30 days (aOR = 1.77, 95% CI 1.10-2.86). Exploratory mediation analysis indicated that the relationship between savings group participation and CCU was partially mediated by financial security, as measured by monthly income. Findings indicate that community savings groups may play an important role in reducing sexual risk behaviors of FSW and hold promise as part of comprehensive, community-led HIV prevention strategies among FSW.

Energy Savings Performance Contract Energy Sales Agreement Toolkit

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

FEMP developed the Energy Savings Performance Contracting Energy Sales Agreement (ESPC ESA) Toolkit to provide federal agency contracting officers and other acquisition team members with information that will facilitate the timely execution of ESPC ESA projects.

Pan Am gets big savings at no cost

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tanz, D.

Pan American World Airways' contract with an energy management control systems distributor enabled the company's terminal and maintenance facilities at JFK airport in New York to shift from housekeeping to major savings without additional cost. Energy savings from a pneumatic control system were split almost equally between Pan Am and Thomas S. Brown Associates (TSBA) Inc., and further savings are expected from a planned computer-controlled system. A full-time energy manager, able to give top priority to energy-consumption problems, was considered crucial to the program's success. Early efforts in light-level reduction and equipment scheduling required extensive persuasion and policing, but successfulmore » energy savings allowed the manager to progress to the more-extensive plants with TSBA.« less

Microwave-assisted extraction of total bioactive saponin fraction from Gymnema sylvestre with reference to gymnemagenin: a potential biomarker.

PubMed

Mandal, Vivekananda; Dewanjee, Saikat; Mandal, Subhash C

2009-01-01

To develop a fast and ecofriendly microwave assisted extraction (MAE) technique for the effective and exhaustive extraction of gymnemagenin as an indicative biomarker for the quality control of Gymnema sylvestre. Several extraction parameters such as microwave power, extraction time, solvent composition, pre-leaching time, loading ratio and extraction cycle were studied for the determination of the optimum extraction condition. Scanning electron micrographs were obtained to elucidate the mechanism of extraction. The final optimum extraction conditions as obtained from the study were: 40% microwave power, 6 min irradiation time, 85% v/v methanol as the extraction solvent, 15 min pre-leaching time and 25 : 1 (mL/g) as the solvent-to-material loading ratio. The proposed extraction technique produced a maximum yield of 4.3% w/w gymnemagenin in 6 min which was 1.3, 2.5 and 1.95 times more efficient than 6 h of heat reflux, 24 h of maceration and stirring extraction, respectively. A synergistic heat and mass transfer theory was also proposed to support the extraction mechanism. Comparison with conventional extraction methods revealed that MAE could save considerable amounts of time and energy, whilst the reduction of volume of organic solvent consumed provides an ecofriendly feature.

On the economic growth theory with Kadiyala production function

NASA Astrophysics Data System (ADS)

Grassetti, Francesca; Hunanyan, Gevorg

2018-05-01

We study the discrete time neoclassical one-sector growth model with differential savings while assuming Kadiyala production function which shows a variable elasticity of substitution symmetric with respect to capital and labor. We show that, if workers save more than shareholders, then the growth path is bounded from above and the boundary is independent from the savings rate of shareholders. Moreover, the growth path for non-developed countries is influenced only by the savings rate of shareholders while level of capital per capita of developed economies is influenced by the savings rate of workers. We also show that multistability phenomena may occur so that the model is able to explain co-existence of under-developed, developing and developed economies. We prove that fluctuations and complex dynamics may arise when the elasticity of substitution between production factors is lower than one and shareholders save more than workers.

Saving Time, Saving Money: The Economics of Unclogging America's Worst Bottlenecks

DOT National Transportation Integrated Search

2000-01-01

A 1999 study by the American Highway Users Alliance entitled "Unclogging America's Arteries: Prescriptions for Healthier Highways" identified the 166 worst bottlenecks in the country and evaluated the benefits of removing them. By assigning monetary ...

Rhetoric vs. reality: employer views on consumer-driven health care.

PubMed

Trude, Sally; Conwell, Leslie

2004-07-01

Because of rising premiums, employers are investigating new health insurance approaches that maintain workers' broad choice of providers while raising awareness of health care costs through increased patient financial responsibility. Employers' knowledge of new health plan products, including consumer-driven health plans and tiered-provider networks, has grown considerably in recent years, according to findings from the Center for Studying Health System Change's (HSC) 2002-03 site visit to 12 nationally representative communities. But employers are concerned that consumer-driven health plans would take considerable effort to implement without much cost savings. They also are skeptical that tiered-provider networks can adequately capture both cost and quality information in a way that is understandable to patients.

Building a Thriving Nation: 21st-Century Vision and Practice to Advance Health and Equity

ERIC Educational Resources Information Center

Cohen, Larry

2016-01-01

It is a great time for prevention. As the United States explores what health in our country should look like, it is an extraordinary time to highlight the role of prevention in improving health, saving lives, and saving money. The Affordable Care Act's investment in prevention has spurred innovation by communities and states to keep people healthy…

31 CFR 315.35 - Payment (redemption).

Code of Federal Regulations, 2013 CFR

2013-07-01

... and Savings Notes. A Series E bond will be paid at any time after two months from issue date at the... interest is $6.90 per $500. (e) Series H. A Series H bond will be redeemed at face value at any time after..., SERIES A, B, C, D, E, F, G, H, J, AND K, AND U.S. SAVINGS NOTES General Provisions for Payment § 315.35...

31 CFR 315.35 - Payment (redemption).

Code of Federal Regulations, 2010 CFR

2010-07-01

... and Savings Notes. A Series E bond will be paid at any time after two months from issue date at the... interest is $6.90 per $500. (e) Series H. A Series H bond will be redeemed at face value at any time after..., SERIES A, B, C, D, E, F, G, H, J, AND K, AND U.S. SAVINGS NOTES General Provisions for Payment § 315.35...

31 CFR 315.35 - Payment (redemption).

Code of Federal Regulations, 2012 CFR

2012-07-01

... and Savings Notes. A Series E bond will be paid at any time after two months from issue date at the... interest is $6.90 per $500. (e) Series H. A Series H bond will be redeemed at face value at any time after..., SERIES A, B, C, D, E, F, G, H, J, AND K, AND U.S. SAVINGS NOTES General Provisions for Payment § 315.35...

31 CFR 315.35 - Payment (redemption).

Code of Federal Regulations, 2011 CFR

2011-07-01

... and Savings Notes. A Series E bond will be paid at any time after two months from issue date at the... interest is $6.90 per $500. (e) Series H. A Series H bond will be redeemed at face value at any time after..., SERIES A, B, C, D, E, F, G, H, J, AND K, AND U.S. SAVINGS NOTES General Provisions for Payment § 315.35...

U.S. Navy Advanced Receiving: A Better Approach to the Basics.

DTIC Science & Technology

1987-04-01

the Navy and DLA should begin now to plan for electronic interchange of data between their inventory management systems. This would eliminate the...labor savings from work simplification, improved material handling, and better work load planning 0 Material savings from reduced packaging and use of... planning purposes, source distribution managers use the following equa- tion to determine maximum consolidation time: Maximum consolidation time = 21

Performance of UN Military Observer Teams: Does Victim Proximity Escalate Commitment to Saving Lives?

DTIC Science & Technology

2010-01-01

conflict resolution behavior in peacekeeping. VICTIM PROXIMITY AND EFFORT TO INTERVENE The power of seemingly minor situational forces to influence human...fleeting as it was in duration (a mere 15 s on average), had a powerful effect on UNMO teams’ ultimate behavioral response. Consistent with previous...demonstrates the principle that situational forces, fortuitous or otherwise, may exact considerable influence over individual and group behaviors that

Solar-Driven Liquid-Metal MHD Generator

NASA Technical Reports Server (NTRS)

Hohl, F.; Lee, J. H.

1982-01-01

Liquid-metal magnetohydrodynamic (MHD) power generator with solar oven as its heat source has potential to produce electric power in space and on Earth at high efficiency. Generator focuses radiation from Sun to heat driving gas that pushes liquid metal past magnetic coil. Power is extracted directly from electric currents set up in conducting liquid. Using solar energy as fuel can save considerable costs and payload weight, compared to previous systems.

Low-Income Community Solar: Utility Return Considerations for Electric Cooperatives

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aznar, Alexandra Y; Gagne, Douglas A

The objective of this short report is to identify project structures that make low-income community solar projects more cost-effective, replicable, and scalable, for electric cooperative and municipal utilities. This report explores the tradeoffs between providing energy bill savings for low-income subscribers and utility project returns, as well as some of the key lessons learned from existing successful low-income community solar pilot projects.

Environmental Analysis

NASA Technical Reports Server (NTRS)

1980-01-01

Burns & McDonnell Engineering's environmental control study is assisted by NASA's Computer Software Management and Information Center's programs in environmental analyses. Company is engaged primarily in design of such facilities as electrical utilities, industrial plants, wastewater treatment systems, dams and reservoirs and aviation installations. Company also conducts environmental engineering analyses and advises clients as to the environmental considerations of a particular construction project. Company makes use of many COSMIC computer programs which have allowed substantial savings.

An Evaluation of Economists’ Influence on Electric Utility Rate Reforms,

DTIC Science & Technology

1982-01-01

PURPA ) of 1978 required all 50 state utility commissions and more than 150 other jurisdictions regulating electric utility rates to con- sider the...complex rate structure). The "cost effectiveness" language of PURPA suggests such an evaluation criterion based on long term considerations without...detailing the components of benefit; see Joskow. Individual hearings under PURPA have generally employed three standards: fuel or energy savings (if a TOU

To save at least $10,000,000,000 by consolidating some duplicative and overlapping Government programs.

THOMAS, 113th Congress

Rep. Culberson, John Abney [R-TX-7

2013-02-05

House - 02/05/2013 Referred to the Committee on Oversight and Government Reform, and in addition to the Committee on Appropriations, for a period to be subsequently determined by the Speaker, in each case for consideration of such provisions as fall within the jurisdiction of the... (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Hospital steam sterilizer usage: could we switch off to save electricity and water?

PubMed

McGain, Forbes; Moore, Graham; Black, Jim

2016-07-01

Steam sterilization in hospitals is an energy and water intensive process. Our aim was to identify opportunities to improve electricity and water use. The objectives were to find: the time sterilizers spent active, idle and off; the variability in sterilizer use with the time of day and day of the week; and opportunities to switch off sterilizers instead of idling when no loads were waiting, and the resultant electricity and water savings. Analyses of routine data for one year of the activity of the four steam sterilizers in one hospital in Melbourne, Australia. We examined active sterilizer cycles, routine sterilizer switch-offs, and when sterilizers were active, idle and off. Several switch-off strategies were examined to identify electricity and water savings: switch off idle sterilizers when no loads are waiting and switch off one sterilizer after 10:00 h and a second sterilizer after midnight on all days. Sterilizers were active for 13,430 (38%) sterilizer-hours, off for 4822 (14%) sterilizer-hours, and idle for 16,788 (48%) sterilizer-hours. All four sterilizers were simultaneously active 9% of the time, and two or more sterilizers were idle for 69% of the time. A sterilizer was idle for two hours or less 13% of the time and idle for more than 2 h 87% of the time. A strategy to switch off idle sterilizers would reduce electricity use by 66 MWh and water use by 1004 kl per year, saving 26% electricity use and 13% of water use, resulting in financial savings of AUD$13,867 (UK£6,517) and a reduction in 79 tonnes of CO2 emissions per year. An alternative switch-off strategy of one sterilizer from 10:00 h onwards and a second from midnight would have saved 30 MWh and 456 kl of water. The methodology used of how hospital sterilizer use could be improved could be applied to all hospitals and more broadly to other equipment used in hospitals. © The Author(s) 2016.

Practical considerations for transitioning early childhood interventions to scale: lessons from the Saving Brains portfolio.

PubMed

Radner, James M; Ferrer, Marvin J S; McMahon, Dominique; Shankar, Anuraj H; Silver, Karlee L

2018-05-01

Small pilot studies of young children have frequently shown promise, but very few have been successfully scaled to the regional or national levels. How can we ensure that these promising approaches move from a suite of pilots to full-scale implementation that can deliver sustainable impact for hundreds of millions of children? To elucidate concrete lessons learned and suggestions on accelerating the transition to impact at scale, we reviewed the Saving Brains portfolio to better understand three points: (1) the extent to which useful signals of impact could be extracted from data at the seed phase, (2) the ways in which innovators (project leaders) were approaching human resource challenges critical for scaling, and (3) the multisector diversity of the portfolio and the way innovators entered partnerships. The findings suggest key considerations for transitioning early childhood development interventions to scale and sustainability: strong entrepreneurial leadership, rigorous measurement and active use of data in support of adaptive learning, and champions acting at subnational levels. Together, these can enable flexible, iterative learning that can make the scaling process an opportunity to increase the level of benefit each child receives from an intervention. © 2018 The Authors. Annals of the New York Academy of Sciences published by Wiley Periodicals, Inc. on behalf of The New York Academy of Sciences.

E-procurement and automatic identification: enhancing supply chain management in the healthcare industry.

PubMed

Smith, Alan D; Flanegin, Frank R

2004-01-01

The concepts of automated e-procurement, or electronic B2B (business-to-business) trade, are grounded in the strategic leveraging of both tangible/intangible assets for successful implementation and execution of electronic trade, resulting in significant financial benefits for firms. Some of the major reasons for this growth include significant process savings from automation, compliance, and purchasing advantage; and reduced costs that organisations can experience by conducting transactions electronically. Although these are the basic benefits associated with generic e-commerce strategies, a majority of these B2B transactions have focused on the purchase of indirect materials (especially office products and travel services). In fact, more than 93% of medical supplies on hospital shelves appear to have universal product numbers on them--at least while still in their boxes and there is a great potential for huge savings in e-procurement in the healthcare field. However, other types of supply chain-related purchases, including maintenance, repair, and operating and replacement parts, and direct material purchases, are becoming more important operational management considerations. In addition, several other key considerations are: existing procurement strategy, the vendor, technology, suppliers, and total costs of ownership. Companies need to analyse their current procurement strategy before developing an e-procurement plan.

Biosimilars for the management of inflammatory bowel diseases: economic considerations.

PubMed

Gulacsi, Laszlo; Pentek, Marta; Rencz, Fanni; Brodszky, Valentin; Baji, Petra; Vegh, Zsuzsanna; Gecse, Krisztina B; Danese, Silvio; Peyrin-Biroulet, Laurent; Lakatos, Peter L

2017-04-06

Biological drugs revolutionized the treatment of inflammatory bowel diseases (IBD) such as Crohn's disease and ulcerative colitis. However, not all clinically eligible patients have access to biologicals, due to significant costs and budget impact. Biosimilars are highly comparable to their originator product in terms of clinical efficacy and safety. Biosimilars are priced 15-75% lower than their reference product, which makes them a less costly alternative and is expected to offer better patients access to biologicals. The total projected cost savings are significant. If the achieved budget savings were used to cover more biological therapy, several additional IBD patients could be treated. Currently, the main barriers to the increasing uptake of biosimilars are the few incentives of the key stakeholders, while physicians' and patients' skepticism towards biosimilars seems to be changing. Over the coming years, biosimilars are expected to gain a growing importance in the treatment of IBD, contributing to a better access to treatment, improving population-level health gain and sustainability of health systems. This review summarizes the results of the literature on the economic considerations of biosimilars in IBD and the role of biosimilar infliximab in the treatment of IBD. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Examination of the costs, benefits and enery conservation aspects of the NASA aircraft fuel conservation technology program

NASA Technical Reports Server (NTRS)

1975-01-01

The costs and benefits of the NASA Aircraft Fuel Conservation Technology Program are discussed. Consideration is given to a present worth analysis of the planned program expenditures, an examination of the fuel savings to be obtained by the year 2005 and the worth of this fuel savings relative to the investment required, a comparison of the program funding with that planned by other Federal agencies for energy conservation, an examination of the private industry aeronautical research and technology financial posture for the period FY 76 - FY 85, and an assessment of the potential impacts on air and noise pollution. To aid in this analysis, a computerized fleet mix forecasting model was developed. This model enables the estimation of fuel consumption and present worth of fuel expenditures for selected commerical aircraft fleet mix scenarios.

Quantifying Adoption Rates and Energy Savings Over Time for Advanced Manufacturing Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hanes, Rebecca; Carpenter Petri, Alberta C; Riddle, Matt

Energy-efficient manufacturing technologies can reduce energy consumption and lower operating costs for an individual manufacturing facility, but increased process complexity and the resulting risk of disruption means that manufacturers may be reluctant to adopt such technologies. In order to quantify potential energy savings at scales larger than a single facility, it is necessary to account for how quickly and how widely the technology will be adopted by manufacturers. This work develops a methodology for estimating energy-efficient manufacturing technology adoption rates using quantitative, objectively measurable technology characteristics, including energetic, economic and technical criteria. Twelve technology characteristics are considered, and each characteristicmore » is assigned an importance weight that reflects its impact on the overall technology adoption rate. Technology characteristic data and importance weights are used to calculate the adoption score, a number between 0 and 1 that represents how quickly the technology is likely to be adopted. The adoption score is then used to estimate parameters for the Bass diffusion curve, which quantifies the change in the number of new technology adopters in a population over time. Finally, energy savings at the sector level are calculated over time by multiplying the number of new technology adopters at each time step with the technology's facility-level energy savings. The proposed methodology will be applied to five state-of-the-art energy-efficient technologies in the carbon fiber composites sector, with technology data obtained from the Department of Energy's 2016 bandwidth study. Because the importance weights used in estimating the Bass curve parameters are subjective, a sensitivity analysis will be performed on the weights to obtain a range of parameters for each technology. The potential energy savings for each technology and the rate at which each technology is adopted in the sector are quantified and used to identify the technologies which offer the greatest cumulative sector-level energy savings over a period of 20 years. Preliminary analysis indicates that relatively simple technologies, such as efficient furnaces, will be adopted more quickly and result in greater cumulative energy savings compared to more complex technologies that require process retrofitting, such as advanced control systems.« less

Soft-copy sonography: cost reduction sensitivity analysis in a pediatric hospital.

PubMed

Don, S; Albertina, M J; Ammann, D

1998-03-01

Our objective was to determine whether interpreting sonograms of pediatric patients using soft-copy (computer workstation) instead of laser-printed film could reduce costs for a pediatric radiology department. We used theoretic models of growth to analyze costs. The costs of a sonographic picture archiving and communication system (three interface devices, two workstations, a network server, maintenance expenses, and storage media costs) were compared with the potential savings of eliminating film and increasing technologist efficiency or reducing the number of technologists. The model was based on historic trends and future capitation estimates that will reduce fee-for-service reimbursement. The effects of varying the study volume and reducing technologists' work hours were analyzed. By converting to soft-copy interpretation, we saved 6 min 32 sec per examination by eliminating film processing waiting time, thus reducing examination time from 30 min to 24 min. During an average day of 27 examinations, 176 min were saved. However, 33 min a day were spent retrieving prior studies from long-term storage; thus, 143 extra minutes a day were available for scanning. This improved efficiency could result in five more sonograms a day obtained by converting to soft-copy interpretation, using existing staff and equipment. Alternatively, five examinations a day would equate to one half of a full-time equivalent technologists position. Our analysis of costs considered that the hospital's anticipated growth of sonography and the depreciation of equipment during 5 years resulted in a savings of more than $606,000. Increasing the examinations by just 200 sonograms in the first year and no further growth resulted in a savings of more than $96,000. If the number of sonograms stayed constant, elimination of film printing alone resulted in a loss of approximately $157,000; reduction of one half of a full-time equivalent technologist's position would recuperate approximately $134,000 of that loss. Soft-copy sonography can save money through improved technologist efficiency, thereby increasing the number of sonograms obtained and revenue generated. If the number of sonograms does not increase, elimination of printing costs and reduction of staff technologists will not result in a savings.

DOD Civilian and Contractor Workforces: Additional Cost Savings Data and Efficiencies Plan are Needed

DTIC Science & Technology

2016-10-01

reductions reported in average strength bNumber of reductions reported in full-time equivalents Note: DOD costs savings provided for the prior FY are...comparing costs from FY 2012 to FY 2017, and not each year in between. Further, officials stated that DOD did not include full- time equivalents ...Application FTE Full-time Equivalent NDAA National Defense Authorization Act This is a work of the U.S. government and is not subject to copyright

Determination of fluoride in oxides with the fluoride-ion activity electrode.

PubMed

Peters, M A; Ladd, D M

1971-07-01

The application of the fluoride-ion activity electrode to the determination of fluoride in various samples has been studied. Samples are decomposed by fusion and the fluoride concentration is determined by a standard-addition or a direct method. The standard-addition method is unsuitable, owing to a positive bias. The direct method, however, is rapid, accurate and precise. The fluoride content of exploration ores, fluorspar, opal glass, phosphate rock and various production samples, has been successfully determined. The success of the direct method depends on the effectiveness of the system used to buffer pH and ionic strength and complex possible interferences (Al(3+), Ca(2+), Fe(3+)). The effect of interferences has been studied and found to be minimal. The procedures are rapid and accurate and may be substituted for the traditional Willard and Winter or pyro hydrolysis methods, with considerable saving of time.

An efficient method for computing unsteady transonic aerodynamics of swept wings with control surfaces

NASA Technical Reports Server (NTRS)

Liu, D. D.; Kao, Y. F.; Fung, K. Y.

1989-01-01

A transonic equivalent strip (TES) method was further developed for unsteady flow computations of arbitrary wing planforms. The TES method consists of two consecutive correction steps to a given nonlinear code such as LTRAN2; namely, the chordwise mean flow correction and the spanwise phase correction. The computation procedure requires direct pressure input from other computed or measured data. Otherwise, it does not require airfoil shape or grid generation for given planforms. To validate the computed results, four swept wings of various aspect ratios, including those with control surfaces, are selected as computational examples. Overall trends in unsteady pressures are established with those obtained by XTRAN3S codes, Isogai's full potential code and measured data by NLR and RAE. In comparison with these methods, the TES has achieved considerable saving in computer time and reasonable accuracy which suggests immediate industrial applications.

Modeling Pilot Behavior for Assessing Integrated Alert and Notification Systems on Flight Decks

NASA Technical Reports Server (NTRS)

Cover, Mathew; Schnell, Thomas

2010-01-01

Numerous new flight deck configurations for caution, warning, and alerts can be conceived; yet testing them with human-in-the-Ioop experiments to evaluate each one would not be practical. New sensors, instruments, and displays are being put into cockpits every day and this is particularly true as we enter the dawn of the Next Generation Air Transportation System (NextGen). By modeling pilot behavior in a computer simulation, an unlimited number of unique caution, warning, and alert configurations can be evaluated 24/7 by a computer. These computer simulations can then identify the most promising candidate formats to further evaluate in higher fidelity, but more costly, Human-in-the-Ioop (HITL) simulations. Evaluations using batch simulations with human performance models saves time, money, and enables a broader consideration of possible caution, warning, and alerting configurations for future flight decks.

Digital transceiver implementation for wavelet packet modulation

NASA Astrophysics Data System (ADS)

Lindsey, Alan R.; Dill, Jeffrey C.

1998-03-01

Current transceiver designs for wavelet-based communication systems are typically reliant on analog waveform synthesis, however, digital processing is an important part of the eventual success of these techniques. In this paper, a transceiver implementation is introduced for the recently introduced wavelet packet modulation scheme which moves the analog processing as far as possible toward the antenna. The transceiver is based on the discrete wavelet packet transform which incorporates level and node parameters for generalized computation of wavelet packets. In this transform no particular structure is imposed on the filter bank save dyadic branching, and a maximum level which is specified a priori and dependent mainly on speed and/or cost considerations. The transmitter/receiver structure takes a binary sequence as input and, based on the desired time- frequency partitioning, processes the signal through demultiplexing, synthesis, analysis, multiplexing and data determination completely in the digital domain - with exception of conversion in and out of the analog domain for transmission.

From Picas to Pixels: An Astro 101 e-book

NASA Astrophysics Data System (ADS)

Shawl, Stephen J.; Byrd, Gene G.; Deustua, Susana E.; LoPresto, Michael C.

2015-01-01

What to do when a publisher discontinues publishing a textbook? That was the dilemma we were presented with. Given that we know we have a high quality product that can contribute to student understanding of science in general and astronomy in particular, and that significant efforts had already been expended on the project, we decided to self-publish, even knowing that the challenges, and the gamble in terms of time and personal expense, were great.Self publication provides an opportunity to produce an updated edition at great cost savings to students---something faculty often say is an important consideration in their choice of a book.We present the end result: a completed publication in various e-book formats and with links to the Discovering Astronomy Concept Videos made for the book. The Discovering Astronomy Activities Manual will again be available. Details of the book, a sample chapter, and other information are available at discoveringastronomy@weebly.com.

Probabilistic track coverage in cooperative sensor networks.

PubMed

Ferrari, Silvia; Zhang, Guoxian; Wettergren, Thomas A

2010-12-01

The quality of service of a network performing cooperative track detection is represented by the probability of obtaining multiple elementary detections over time along a target track. Recently, two different lines of research, namely, distributed-search theory and geometric transversals, have been used in the literature for deriving the probability of track detection as a function of random and deterministic sensors' positions, respectively. In this paper, we prove that these two approaches are equivalent under the same problem formulation. Also, we present a new performance function that is derived by extending the geometric-transversal approach to the case of random sensors' positions using Poisson flats. As a result, a unified approach for addressing track detection in both deterministic and probabilistic sensor networks is obtained. The new performance function is validated through numerical simulations and is shown to bring about considerable computational savings for both deterministic and probabilistic sensor networks.

Effect of Geometric Parameters on Formability and Strain Path During Tube Hydrforming Process

NASA Astrophysics Data System (ADS)

Omar, A.; Harisankar, K. R.; Tewari, Asim; Narasimhan, K.

2016-08-01

Forming limit diagram (FLD) is an important tool to measure the material's formability for metal forming processes. In order to successfully manufacture a component through tube hydroforming process it is very important to know the effect of material properties, process and geometrical parameters on the outcome of finished product. This can be obtained by running a finite element code which not only saves time and money but also gives a result with considerable accuracy. Therefore, in this paper the mutual effect of diameter as well as thickness has been studied. Firstly the finite element based prediction is carried out to assess the formability of seamless and welded tubes with varying thickness. Later on, effect of varying diameter and thickness on strain path is predicted using statistical based regression analysis. Finally, the mutual effect of varying material property alongwith varying thickness and diameter on constraint factor is studied.

A comparison of neural network architectures for the prediction of MRR in EDM

NASA Astrophysics Data System (ADS)

Jena, A. R.; Das, Raja

2017-11-01

The aim of the research work is to predict the material removal rate of a work-piece in electrical discharge machining (EDM). Here, an effort has been made to predict the material removal rate through back-propagation neural network (BPN) and radial basis function neural network (RBFN) for a work-piece of AISI D2 steel. The input parameters for the architecture are discharge-current (Ip), pulse-duration (Ton), and duty-cycle (τ) taken for consideration to obtained the output for material removal rate of the work-piece. In the architecture, it has been observed that radial basis function neural network is comparatively faster than back-propagation neural network but logically back-propagation neural network results more real value. Therefore BPN may consider as a better process in this architecture for consistent prediction to save time and money for conducting experiments.

Flow in nonrotating passages of radial inflow turbines

NASA Technical Reports Server (NTRS)

Baskharone, E.; Hamed, A.; Tabakoff, W.

1979-01-01

The analysis of irrotational incompressible flow field in the stator unit of a radial inflow turbine is presented. The solution in the combined scroll-nozzle assembly is complicated by the domain geometry and by its multiconnectivity. This model is necessary, however, in order to provide a better understanding of the mutual interaction effects of these two components on the flow field. The finite element method is used in the solution which is limited to the two dimensional case. A substructuring technique is adopted in the computational procedure and results in considerable savings in both computer time and core storage requirements. The results are presented for the flow velocity magnitude and direction in the scroll and through the various nozzles, for two nozzle blade geometries. In addition, the mass flow rates in the different nozzles are computed and their deviations from the mean value determined.

Improvement of Groundwater Regime Through Innovative Rainwater Harvesting Along Road Sides

NASA Astrophysics Data System (ADS)

Jain, S. K.

The paper deals about viable and immediate solution of shortage of drinking water in the countries like India, Asian, and African continents. The paper highlights rainwater harvesting along both the sides of roads with the help of suitable, simple structures, which are easy to maintain. This may turn out to be long-term solution for the areas, which are draught prone, or having below normal rainfall. The example given in the paper for “Golden Quadrilateral” project of express national highways in India is quite illustrative and is applicable to other countries also falling in almost similar kind of climatic zones. The concept given in the paper would enhance water availability 8—10 times compared to natural process of rainfall infiltration. It would also improve quality of ground water and would save considerable energy in lifting the water due to the rise in water levels.

Dynamics of the recovery of damaged tundra vegetation. Annual progress report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Amundsen, C.C.

1976-01-01

A study, begun in 1971, continues to document the environmental factors which affect the recovery of damaged tundra landscapes. A measurement technique was developed on Amchitka Island to allow the rapid acquisition of data on species presence and frequency across areas disturbed at various times and in various ways. Samples across all examples of aspect, slope steepness and exposure are taken. Studies now include Adak Island and the Point Barrow area. We have concluded that there was no directional secondary succession on the Aleutian tundra, although there was vigorous recovery on organic soils. Our study led to recommendations which resultedmore » in less intensive reclamation management at a considerable financial saving and without further biological perturbation. Because of the increasing activity on tundra landscapes, for energy extraction, transportation or production, military or other reasons, we have expanded our sampling to other tundra areas where landscape disruption is occurring or is predicted.« less

Unlocking the potential of smart grid technologies with behavioral science

PubMed Central

Sintov, Nicole D.; Schultz, P. Wesley

2015-01-01

Smart grid systems aim to provide a more stable and adaptable electricity infrastructure, and to maximize energy efficiency. Grid-linked technologies vary widely in form and function, but generally share common potentials: to reduce energy consumption via efficiency and/or curtailment, to shift use to off-peak times of day, and to enable distributed storage and generation options. Although end users are central players in these systems, they are sometimes not central considerations in technology or program design, and in some cases, their motivations for participating in such systems are not fully appreciated. Behavioral science can be instrumental in engaging end-users and maximizing the impact of smart grid technologies. In this paper, we present emerging technologies made possible by a smart grid infrastructure, and for each we highlight ways in which behavioral science can be applied to enhance their impact on energy savings. PMID:25914666

From Picas to Pixels: An Astro 101 e-Book

NASA Astrophysics Data System (ADS)

Shawl, S.; Byrd, G.; Deustua, S.; LoPresto, M.

2015-11-01

What happens when a publisher discontinues publishing a textbook? That was the dilemma we were presented. Given that we know we have a high quality product that can contribute to student understanding of science in general and astronomy in particular, and that significant efforts had already been expended on the project, we decided to self-publish, even knowing that the challenges, and the gamble in terms of time and personal expense, were great. Self publication provides an opportunity to produce an updated edition at great cost savings to students— something faculty often say is an important consideration in their choice of a book. We discuss the many significant challenges, the greatest of which is marketing. We present the end result: a completed publication in various e-book formats and with links to the Discovering Astronomy Concept Videos made for the book (Figure 1). Details of the book, a sample chapter, and other information are available online.

The underappreciated potential of peatlands in global climate change mitigation strategies.

PubMed

Leifeld, J; Menichetti, L

2018-03-14

Soil carbon sequestration and avoidable emissions through peatland restoration are both strategies to tackle climate change. Here we compare their potential and environmental costs regarding nitrogen and land demand. In the event that no further areas are exploited, drained peatlands will cumulatively release 80.8 Gt carbon and 2.3 Gt nitrogen. This corresponds to a contemporary annual greenhouse gas emission of 1.91 (0.31-3.38) Gt CO 2 -eq. that could be saved with peatland restoration. Soil carbon sequestration on all agricultural land has comparable mitigation potential. However, additional nitrogen is needed to build up a similar carbon pool in organic matter of mineral soils, equivalent to 30-80% of the global fertilizer nitrogen application annually. Restoring peatlands is 3.4 times less nitrogen costly and involves a much smaller land area demand than mineral soil carbon sequestration, calling for a stronger consideration of peatland rehabilitation as a mitigation measure.

Unlocking the potential of smart grid technologies with behavioral science.

PubMed

Sintov, Nicole D; Schultz, P Wesley

2015-01-01

Smart grid systems aim to provide a more stable and adaptable electricity infrastructure, and to maximize energy efficiency. Grid-linked technologies vary widely in form and function, but generally share common potentials: to reduce energy consumption via efficiency and/or curtailment, to shift use to off-peak times of day, and to enable distributed storage and generation options. Although end users are central players in these systems, they are sometimes not central considerations in technology or program design, and in some cases, their motivations for participating in such systems are not fully appreciated. Behavioral science can be instrumental in engaging end-users and maximizing the impact of smart grid technologies. In this paper, we present emerging technologies made possible by a smart grid infrastructure, and for each we highlight ways in which behavioral science can be applied to enhance their impact on energy savings.

Unlocking the potential of smart grid technologies with behavioral science

DOE PAGES

Sintov, Nicole D.; Schultz, P. Wesley

2015-04-09

Smart grid systems aim to provide a more stable and adaptable electricity infrastructure, and to maximize energy efficiency. Grid-linked technologies vary widely in form and function, but generally share common potentials: to reduce energy consumption via efficiency and/or curtailment, to shift use to off-peak times of day, and to enable distributed storage and generation options. Although end users are central players in these systems, they are sometimes not central considerations in technology or program design, and in some cases, their motivations for participating in such systems are not fully appreciated. Behavioral science can be instrumental in engaging end-users and maximizingmore » the impact of smart grid technologies. In this study, we present emerging technologies made possible by a smart grid infrastructure, and for each we highlight ways in which behavioral science can be applied to enhance their impact on energy savings.« less

Unlocking the potential of smart grid technologies with behavioral science

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sintov, Nicole D.; Schultz, P. Wesley

Smart grid systems aim to provide a more stable and adaptable electricity infrastructure, and to maximize energy efficiency. Grid-linked technologies vary widely in form and function, but generally share common potentials: to reduce energy consumption via efficiency and/or curtailment, to shift use to off-peak times of day, and to enable distributed storage and generation options. Although end users are central players in these systems, they are sometimes not central considerations in technology or program design, and in some cases, their motivations for participating in such systems are not fully appreciated. Behavioral science can be instrumental in engaging end-users and maximizingmore » the impact of smart grid technologies. In this study, we present emerging technologies made possible by a smart grid infrastructure, and for each we highlight ways in which behavioral science can be applied to enhance their impact on energy savings.« less

Interactive visualization tools for the structural biologist.

PubMed

Porebski, Benjamin T; Ho, Bosco K; Buckle, Ashley M

2013-10-01

In structural biology, management of a large number of Protein Data Bank (PDB) files and raw X-ray diffraction images often presents a major organizational problem. Existing software packages that manipulate these file types were not designed for these kinds of file-management tasks. This is typically encountered when browsing through a folder of hundreds of X-ray images, with the aim of rapidly inspecting the diffraction quality of a data set. To solve this problem, a useful functionality of the Macintosh operating system (OSX) has been exploited that allows custom visualization plugins to be attached to certain file types. Software plugins have been developed for diffraction images and PDB files, which in many scenarios can save considerable time and effort. The direct visualization of diffraction images and PDB structures in the file browser can be used to identify key files of interest simply by scrolling through a list of files.

Occupational risk identification using hand-held or laptop computers.

PubMed

Naumanen, Paula; Savolainen, Heikki; Liesivuori, Jyrki

2008-01-01

This paper describes the Work Environment Profile (WEP) program and its use in risk identification by computer. It is installed into a hand-held computer or a laptop to be used in risk identification during work site visits. A 5-category system is used to describe the identified risks in 7 groups, i.e., accidents, biological and physical hazards, ergonomic and psychosocial load, chemicals, and information technology hazards. Each group contains several qualifying factors. These 5 categories are colour-coded at this stage to aid with visualization. Risk identification produces visual summary images the interpretation of which is facilitated by colours. The WEP program is a tool for risk assessment which is easy to learn and to use both by experts and nonprofessionals. It is especially well adapted to be used both in small and in larger enterprises. Considerable time is saved as no paper notes are needed.

Moral Hypocrisy on the Basis of Construal Level: To Be a Utilitarian Personal Decision Maker or to Be a Moral Advisor?

PubMed Central

Xiao, Wei; Wu, Qing; Yang, Qun; Zhou, Liang; Jiang, Yuan; Zhang, Jiaxi; Miao, Danmin; Peng, Jiaxi

2015-01-01

Background People encounter various moral issues that involve making decisions for others by giving advice. Objective This study investigated the characteristics of providing suggestions for oneself versus providing suggestions for others in ethical decision-making and the differences between them based on Construal Level Theory (CLT). Methods A total of 768 undergraduate students from three universities in China were randomly assigned to eight groups on the basis of a grid of two Construal Levels (self or others) by two different numbers of people saved (5 people or 15 people) by two problem situations (trolley problem vs. footbridge problem). The investigation examined participants’ decisions to opt to take action or refrain from action that would have the consequence of saving more people. Results The main effects of Construal Level (F1, 752 = 6.46, p = .011), saving number (F1, 752 = 35.81, p < .001), and problem situation type (F1, 752 = 330.55, p < .001) were all significant. The interaction of the problem situation and saving number (F1, 752 = 1.01, p = .31), and social distance and saving number (F1, 752 = 0.85, p = .36), and interaction of the three independent factors (F1, 752 = 0.47, p = .49) were not significant. However, the interaction of social distance and problem situation (F1, 752 = 9.46, p = .002) was significant. Results indicated the participants utilized a component of utilitarian reasoning in the decision-making, and their behaviors appeared more utilitarian at low Construal Levels (CLs) compared to high. Conclusion CLs, saving numbers, and problem situation significantly affected moral decision-making and exhibited significant interaction. Making decisions for oneself (low-construal) rather than giving advice to others (high-construal) was one important factor that determined whether the people were utilitarian or not. Utilitarian considerations are more relevant in impersonal dilemmas. PMID:25689521

Optimizing MRI Logistics: Focused Process Improvements Can Increase Throughput in an Academic Radiology Department.

PubMed

O'Brien, Jeremy J; Stormann, Jeremy; Roche, Kelli; Cabral-Goncalves, Ines; Monks, Annamarie; Hallett, Donna; Mortele, Koenraad J

2017-02-01

The purpose of this study was to describe and evaluate the effect of focused process improvements on protocol selection and scheduling in the MRI division of a busy academic medical center, as measured by examination and room times, magnet fill rate, and potential revenue increases and cost savings to the department. Focused process improvements, led by a multidisciplinary team at a large academic medical center, were directed at streamlining MRI protocols and optimizing matching protocol ordering to scheduling while maintaining or improving image quality. Data were collected before (June 2013) and after (March 2015) implementation of focused process improvements and divided by subspecialty on type of examination, allotted examination time, actual examination time, and MRI parameters. Direct and indirect costs were compiled and analyzed in consultation with the business department. Data were compared with evaluated effects on selected outcome and efficiency measures, as well as revenue and cost considerations. Statistical analysis was performed using a t test. During the month of June 2013, 2145 MRI examinations were performed at our center; 2702 were performed in March 2015. Neuroradiology examinations were the most common (59% in June 2013, 56% in March 2015), followed by body examinations (25% and 27%). All protocols and parameters were analyzed and streamlined for each examination, with slice thickness, TR, and echo train length among the most adjusted parameters. Mean time per examination decreased from 43.4 minutes to 36.7 minutes, and mean room time per patient decreased from 46.3 to 43.6 minutes (p = 0.009). Potential revenue from increased throughput may yield up to $3 million yearly (at $800 net revenue per scan) or produce cost savings if the facility can reduce staffed scanner hours or the number of scanners in its fleet. Actual revenue and expense impacts depend on the facility's fixed and variable cost structure, payer contracts, MRI fleet composition, and unmet MRI demand. Focused process improvements in selecting MRI protocols and scheduling examinations significantly increased throughput in the MRI division, thereby increasing capacity and revenue. Shorter scan and department times may also improve patient experience.

Year-Round Daylight Saving Time Study : Volume 2. Supporting Studies

DOT National Transportation Integrated Search

1975-06-01

This volume contains detailed background material in support of findings of the Interim Report. It includes the findings of a survey of attifudes towards daylight saving conducted by the National Opinion Research Center; description of sunrise and su...

Cost-savings for biosimilars in the United States: a theoretical framework and budget impact case study application using filgrastim.

PubMed

Grewal, Simrun; Ramsey, Scott; Balu, Sanjeev; Carlson, Josh J

2018-05-18

Biosimilars can directly reduce the cost of treating patients for whom a reference biologic is indicated by offering a highly similar, lower priced alternative. We examine factors related to biosimilar regulatory approval, uptake, pricing, and financing and the potential impact on drug expenditures in the U.S. We developed a framework to illustrate how key factors including regulatory policies, provider and patient perception, pricing, and payer policies impact biosimilar cost-savings. Further, we developed a budget impact cost model to estimate savings from filgrastim biosimilars under various scenarios. The model uses publicly available data on disease incidence, treatment patterns, market share, and drug prices to estimate the cost-savings over a 5-year time horizon. We estimate five-year cost savings of $256 million, of which 18% ($47 million) are from reduced patient out-of-pocket costs, 34% ($86 million) are savings to commercial payers, and 48% ($123 million) are savings for Medicare. Additional scenarios demonstrate the impact of uncertain factors, including price, uptake, and financing policies. A variety or interrelated factors influence the development, uptake, and cost-savings for Biosimilars use in the U.S. The filgrastim case is a useful example that illustrates these factors and the potential magnitude of costs savings.

Cost-Savings Analysis of Renal Scintigraphy, Stratified by Renal Function Thresholds: Mercaptoacetyltriglycine Versus Diethylene Triamine Penta-Acetic Acid.

PubMed

Parikh, Kushal R; Davenport, Matthew S; Viglianti, Benjamin L; Hubers, David; Brown, Richard K J

2016-07-01

To determine the financial implications of switching technetium (Tc)-99m mercaptoacetyltriglycine (MAG-3) to Tc-99m diethylene triamine penta-acetic acid (DTPA) at certain renal function thresholds before renal scintigraphy. Institutional review board approval was obtained, and informed consent was waived for this HIPAA-compliant, retrospective, cohort study. Consecutive adult subjects (27 inpatients; 124 outpatients) who underwent MAG-3 renal scintigraphy, in the period from July 1, 2012 to June 30, 2013, were stratified retrospectively by hypothetical serum creatinine and estimated glomerular filtration rate (eGFR) thresholds, based on pre-procedure renal function. Thresholds were used to estimate the financial effects of using MAG-3 when renal function was at or worse than a given cutoff value, and DTPA otherwise. Cost analysis was performed with consideration of raw material and preparation costs, with radiotracer costs estimated by both vendor list pricing and proprietary institutional pricing. The primary outcome was a comparison of each hypothetical threshold to the clinical reality in which all subjects received MAG-3, and the results were supported by univariate sensitivity analysis. Annual cost savings by serum creatinine threshold were as follows (threshold given in mg/dL): $17,319 if ≥1.0; $33,015 if ≥1.5; and $35,180 if ≥2.0. Annual cost savings by eGFR threshold were as follows (threshold given in mL/min/1.73 m(2)): $21,649 if ≤60; $28,414 if ≤45; and $32,744 if ≤30. Cost-savings inflection points were approximately 1.25 mg/dL (serum creatinine) and 60 mL/min/1.73m(2) (eGFR). Secondary analysis by proprietary institutional pricing revealed similar trends, and cost savings of similar magnitude. Sensitivity analysis confirmed cost savings at all tested thresholds. Reserving MAG-3 utilization for patients who have impaired renal function can impart substantial annual cost savings to a radiology department. Copyright © 2016 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Life-cycle models of saving and the effect of the timing of divorce on retirement economic well-being.

PubMed

Fethke, C C

1989-05-01

The long-term effect of the current high rate of divorce upon the future economic status of individuals has not been thoroughly analyzed. This study reviews the retirement, precautionary, and bequest motives for saving, then evaluates how marriage dissolution may (a) decrease the family's savings rate, (b) cause shifts in the family's portfolio to assets with lower rates of return, and (c) destroy or deplete existing family assets. Whether divorce interrupts the savings process or destroys assets, it is unlikely that most individuals will be able to save enough in later life to overcome the loss. The long-term effect may well be that, in future years, we will recognize a new category of elderly poor, those who have experienced the dissolution of their marriage.

Complex technology of vacuum-arc processing of structural material surface

NASA Astrophysics Data System (ADS)

Arustamov, V. N.; Ashurov, Kh. B.; Kadyrov, Kh. Kh.; Khudoikulov, I. Kh.

2015-08-01

The development of environmentally friendly and energy-resource-saving technologies based on vacuum arc discharge is a topical problem in science and engineering. In view of their unique properties, cathode spots of a vacuum arc induce cleaning of the surface of an article (cathode) from various contaminations and pulsed thermal action on the surface layers. These processes occur in complex with vacuum-arc deposition of coatings in the same technological cycle, which makes it possible to considerably increase the efficiency of methods for changing physical, mechanical, and chemical properties of the surface of steel articles, which considerably increase their service life. Analysis of the formation of the temperature regime of the surface during vacuum arc action and of the parameters of the deposited coating will make it possible to optimize the regimes of complex treatment of the surfaces of articles and is of considerable theoretical and practical importance.

Benefits of Operational Consideration into the Guidance, Navigation, and Control Design of Spacecraft

NASA Technical Reports Server (NTRS)

Morris, Mark C.; Holt, Greg N.

2011-01-01

The following paper points out historical examples where operational consideration into the GN&C design could have helped avoid operational complexity, reduce costs, ensure the ability for a GN&C system to be able to adapt to failures, and in some cases might have helped save mission objectives. A costly repeat of mistakes could befall a program if previous operational lessons, especially from operators of vehicles with similar GN&C systems, are not considered during the GN&C design phase of spacecraft. The information gained from operational consideration during the design can lead to improvements of the design, allow less ground support during operations, and prevent repetition of previous mistakes. However, this benefit can only occur if spacecraft operators adequately capture lessons learned that would improve future designs for operations and those who are designing spacecraft incorporate inputs from those that have previously operated similar GN&C systems.

Principles of continuous quality improvement applied to intravenous therapy.

PubMed

Dunavin, M K; Lane, C; Parker, P E

1994-01-01

Documentation of the application of the principles of continuous quality improvement (CQI) to the health care setting is crucial for understanding the transition from traditional management models to CQI models. A CQI project was designed and implemented by the IV Therapy Department at Lawrence Memorial Hospital to test the application of these principles to intravenous therapy and as a learning tool for the entire organization. Through a prototype inventory project, significant savings in cost and time were demonstrated using check sheets, flow diagrams, control charts, and other statistical tools, as well as using the Plan-Do-Check-Act cycle. As a result, a primary goal, increased time for direct patient care, was achieved. Eight hours per week in nursing time was saved, relationships between two work areas were improved, and $6,000 in personnel costs, storage space, and inventory were saved.

Solid oral forms availability in children: a cost saving investigation

PubMed Central

Lajoinie, Audrey; Henin, Emilie; Kassai, Behrouz; Terry, David

2014-01-01

Aim To assess the suitability and potential cost savings, from both the hospital and community perspective, of prescribed oral liquid medicine substitution with acceptable solid forms for children over 2 years. Method Oral liquid medicines dispensed from a paediatric hospital (UK) in 1 week were assessed by screening for existence of the solid form alternative and evaluating the acceptability of the available solid form, firstly related to the prescribed dose and secondly to acceptable size depending on the child's age. Costs were calculated based on providing treatment for 28 days or prescribed duration for short term treatments. Results Over 90% (440/476) of liquid formulations were available as a marketed solid form. Considering dosage acceptability (maximum of 10% deviation from prescribed dosage or 0% for narrow therapeutic range drugs, maximum tablet divisions into quarters) 80% of liquids could be substituted with a solid form. The main limitation for liquid substitution would be solid form size. However, two-thirds of prescribed liquids could have been substituted with a suitable solid form for dosage and size, with estimated savings being of £5K and £8K in 1 week, respectively based on hospital and community costs, corresponding to a projected annual saving of £238K and £410K (single institution). Conclusion Whilst not all children over 2 years will be able to swallow tablets, drug cost savings if oral liquid formulations were substituted with suitable solid dosage forms would be considerable. Given the numerous advantages of solid forms compared with liquids, this study may provide a theoretical basis for investing in supporting children to swallow tablets/capsules. PMID:24965935

Cost-effectiveness of vaccination against pneumococcal bacteremia among elderly people.

PubMed

Sisk, J E; Moskowitz, A J; Whang, W; Lin, J D; Fedson, D S; McBean, A M; Plouffe, J F; Cetron, M S; Butler, J C

Clinical, epidemiologic, and policy considerations support updating the cost-effectiveness of pneumococcal vaccination for elderly people and targeting the evaluation only to prevention of pneumococcal bacteremia. To assess the implications for medical costs and health effects of vaccination against pneumococcal bacteremia in elderly people. Cost-effectiveness analysis of pneumococcal vaccination compared with no vaccination, from a societal perspective. The elderly population aged 65 years and older in the United States in 3 geographic areas: metropolitan Atlanta, Ga; Franklin County, Ohio; and Monroe County, New York. Incremental medical costs and health effects, expressed in quality-adjusted life-years per person vaccinated. Vaccination was cost saving, ie, it both reduced medical expenses and improved health, for all age groups and geographic areas analyzed in the base case. For people aged 65 years and older, vaccination saved $8.27 and gained 1.21 quality-adjusted days of life per person vaccinated. Vaccination of the 23 million elderly people unvaccinated in 1993 would have gained about 78000 years of healthy life and saved $194 million. In univariate sensitivity analysis, the results remained cost saving except for doubling vaccination costs, including future medical costs of survivors, and lowering vaccination effectiveness. With assumptions most unfavorable to vaccination, cost per quality-adjusted life-year ranged from $35 822 for ages 65 to 74 years to $598 487 for ages 85 years and older. In probabilistic sensitivity analysis, probability intervals were more narrow, with less than 5% probability that the ratio for ages 85 years and older would exceed $100000. Pneumococcal vaccination saves costs in the prevention of bacteremia alone and is greatly underused among the elderly population, on both health and economic grounds. These results support recent recommendations of the Advisory Committee on Immunization Practices and public and private efforts under way to improve vaccination rates.

Chapter 2: Commercial and Industrial Lighting Evaluation Protocol. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurnik, Charles W; Gowans, Dakers; Telarico, Chad

The Commercial and Industrial Lighting Evaluation Protocol (the protocol) describes methods to account for gross energy savings resulting from the programmatic installation of efficient lighting equipment in large populations of commercial, industrial, and other nonresidential facilities. This protocol does not address savings resulting from changes in codes and standards, or from education and training activities. A separate Uniform Methods Project (UMP) protocol, Chapter 3: Commercial and Industrial Lighting Controls Evaluation Protocol, addresses methods for evaluating savings resulting from lighting control measures such as adding time clocks, tuning energy management system commands, and adding occupancy sensors.

Novel techniques for data decomposition and load balancing for parallel processing of vision systems: Implementation and evaluation using a motion estimation system

NASA Technical Reports Server (NTRS)

Choudhary, Alok Nidhi; Leung, Mun K.; Huang, Thomas S.; Patel, Janak H.

1989-01-01

Computer vision systems employ a sequence of vision algorithms in which the output of an algorithm is the input of the next algorithm in the sequence. Algorithms that constitute such systems exhibit vastly different computational characteristics, and therefore, require different data decomposition techniques and efficient load balancing techniques for parallel implementation. However, since the input data for a task is produced as the output data of the previous task, this information can be exploited to perform knowledge based data decomposition and load balancing. Presented here are algorithms for a motion estimation system. The motion estimation is based on the point correspondence between the involved images which are a sequence of stereo image pairs. Researchers propose algorithms to obtain point correspondences by matching feature points among stereo image pairs at any two consecutive time instants. Furthermore, the proposed algorithms employ non-iterative procedures, which results in saving considerable amounts of computation time. The system consists of the following steps: (1) extraction of features; (2) stereo match of images in one time instant; (3) time match of images from consecutive time instants; (4) stereo match to compute final unambiguous points; and (5) computation of motion parameters.

A cost-consequences analysis of a primary care librarian question and answering service.

PubMed

McGowan, Jessie; Hogg, William; Zhong, Jianwei; Zhao, Xue

2012-01-01

Cost consequences analysis was completed from randomized controlled trial (RCT) data for the Just-in-time (JIT) librarian consultation service in primary care that ran from October 2005 to April 2006. The service was aimed at providing answers to clinical questions arising during the clinical encounter while the patient waits. Cost saving and cost avoidance were also analyzed. The data comes from eighty-eight primary care providers in the Ottawa area working in Family Health Networks (FHNs) and Family Health Groups (FHGs). We conducted a cost consequences analysis based on data from the JIT project. We also estimated the potential economic benefit of JIT librarian consultation service to the health care system. The results show that the cost per question for the JIT service was $38.20. The cost could be as low as $5.70 per question for a regular service. Nationally, if this service was implemented and if family physicians saw additional patients when the JIT service saved them time, up to 61,100 extra patients could be seen annually. A conservative estimate of the cost savings and cost avoidance per question for JIT was $11.55. The cost per question, if the librarian service was used at full capacity, is quite low. Financial savings to the health care system might exceed the cost of the service. Saving physician's time during their day could potentially lead to better access to family physicians by patients. Implementing a librarian consultation service can happen quickly as the time required to train professional librarians to do this service is short.