A Life Cycle Assessment Framework for Pavement Maintenance and Rehabilitation Technologies : or An Integrated Life Cycle Assessment (LCA) – Life Cycle Cost Analysis (LCCA) Framework for Pavement Maintenance and Rehabilitation

DOT National Transportation Integrated Search

2018-02-01

Qing Lu (ORCID ID 0000-0002-9120-9218) Given a huge amount of annual investment and large inputs of energy and natural resources in pavement maintenance and rehabilitation (M&R) activities, significant environmental improvement and budget saving can ...

WinHPC System Policies | High-Performance Computing | NREL

Science.gov Websites

requiring high CPU utilization or large amounts of memory should be run on the worker nodes. WinHPC02 is not associated data are removed when NREL worker status is discontinued. Users should make arrangements to save other users. Licenses are returned to the license pool when other users close the application or after

31 CFR 360.10 - Amounts which may be purchased.

Code of Federal Regulations, 2013 CFR

2013-07-01

... STATES SAVINGS BONDS, SERIES I Limitations on Annual Purchases § 360.10 Amounts which may be purchased. The amount of savings bonds of Series I which may be purchased and held, in the name of any one person....13, at any time during the calendar year in which the bonds are issued. [63 FR 38049, July 14, 1998...

31 CFR 360.10 - Amounts which may be purchased.

Code of Federal Regulations, 2010 CFR

2010-07-01

... UNITED STATES SAVINGS BONDS, SERIES I Limitations on Annual Purchases § 360.10 Amounts which may be purchased. The amount of savings bonds of Series I which may be purchased and held, in the name of any one....13, at any time during the calendar year in which the bonds are issued. [63 FR 38049, July 14, 1998...

31 CFR 360.10 - Amounts which may be purchased.

Code of Federal Regulations, 2014 CFR

2014-07-01

... UNITED STATES SAVINGS BONDS, SERIES I Limitations on Annual Purchases § 360.10 Amounts which may be purchased. The amount of savings bonds of Series I which may be purchased and held, in the name of any one....13, at any time during the calendar year in which the bonds are issued. [63 FR 38049, July 14, 1998...

Evaluating the benefits of digital pathology implementation: Time savings in laboratory logistics.

PubMed

Baidoshvili, Alexi; Bucur, Anca; van Leeuwen, Jasper; van der Laak, Jeroen; Kluin, Philip; van Diest, Paul J

2018-06-20

The benefits of digital pathology for workflow improvement and thereby cost savings in pathology, at least partly outweighing investment costs, are increasingly recognized. Successful implementations in a variety of scenarios start to demonstrate cost benefits of digital pathology for both research and routine diagnostics, contributing to a sound business case encouraging further adoption. To further support new adopters, there is still a need for detailed assessment of the impact this technology has on the relevant pathology workflows with emphasis on time saving. To assess the impact of digital pathology adoption on logistic laboratory tasks (i.e. not including pathologists' time for diagnosis making) in LabPON, a large regional pathology laboratory in The Netherlands. To quantify the benefits of digitization we analyzed the differences between the traditional analog and new digital workflows, carried out detailed measurements of all relevant steps in key analog and digital processes, and compared time spent. We modeled and assessed the logistic savings in five workflows: (1) Routine diagnosis, (2) Multi-disciplinary meeting, (3) External revision requests, (4) Extra stainings and (5) External consultation. On average over 19 working hours were saved on a typical day by working digitally, with the highest savings in routine diagnosis and multi-disciplinary meeting workflows. By working digitally, a significant amount of time could be saved in a large regional pathology lab with a typical case mix. We also present the data in each workflow per task and concrete logistic steps to allow extrapolation to the context and case mix of other laboratories. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

A Study on the Saving Method of Plate Jigs in Hull Block Butt Welding

NASA Astrophysics Data System (ADS)

Ko, Dae-Eun

2017-11-01

A large amount of plate jigs is used for alignment of welding line and control of welding deformations in hull block assembly stage. Besides material cost, the huge working man-hours required for working process of plate jigs is one of the obstacles in productivity growth of shipyard. In this study, analysis method was proposed to simulate the welding deformations of block butt joint with plate jigs setting. Using the proposed analysis method, an example simulation was performed for actual panel block joint to investigate the saving method of plate jigs. Results show that it is possible to achieve two objectives of quality accuracy of the hull block and saving the plate jig usage at the same time by deploying the plate jigs at the right places. And the proposed analysis method can be used in establishing guidelines for the proper use of plate jigs in block assembly stage.

Optical smart packaging to reduce transmitted information.

PubMed

Cabezas, Luisa; Tebaldi, Myrian; Barrera, John Fredy; Bolognini, Néstor; Torroba, Roberto

2012-01-02

We demonstrate a smart image-packaging optical technique that uses what we believe is a new concept to save byte space when transmitting data. The technique supports a large set of images mapped into modulated speckle patterns. Then, they are multiplexed into a single package. This operation results in a substantial decreasing of the final amount of bytes of the package with respect to the amount resulting from the addition of the images without using the method. Besides, there are no requirements on the type of images to be processed. We present results that proof the potentiality of the technique.

Daylight Saving Time Transitions and Road Traffic Accidents

PubMed Central

Lahti, Tuuli; Nysten, Esa; Haukka, Jari; Sulander, Pekka; Partonen, Timo

2010-01-01

Circadian rhythm disruptions may have harmful impacts on health. Circadian rhythm disruptions caused by jet lag compromise the quality and amount of sleep and may lead to a variety of symptoms such as fatigue, headache, and loss of attention and alertness. Even a minor change in time schedule may cause considerable stress for the body. Transitions into and out of daylight saving time alter the social and environmental timing twice a year. According to earlier studies, this change in time-schedule leads to sleep disruption and fragmentation of the circadian rhythm. Since sleep deprivation decreases motivation, attention, and alertness, transitions into and out of daylight saving time may increase the amount of accidents during the following days after the transition. We studied the amount of road traffic accidents one week before and one week after transitions into and out of daylight saving time during years from 1981 to 2006. Our results demonstrated that transitions into and out of daylight saving time did not increase the number of traffic road accidents. PMID:20652036

VA Telemedicine: An Analysis of Cost and Time Savings.

PubMed

Russo, Jack E; McCool, Ryan R; Davies, Louise

2016-03-01

The Veterans Affairs (VA) healthcare system provides beneficiary travel reimbursement ("travel pay") to qualifying patients for traveling to appointments. Travel pay is a large expense for the VA and hence the U.S. Government, projected to cost nearly $1 billion in 2015. Telemedicine in the VA system has the potential to save money by reducing patient travel and thus the amount of travel pay disbursed. In this study, we quantify this savings and also report trends in VA telemedicine volumes over time. All telemedicine visits based at the VA Hospital in White River Junction, VT between 2005 and 2013 were reviewed (5,695 visits). Travel distance and time saved as a result of telemedicine were calculated. Clinical volume in the mental health department, which has had the longest participation in telemedicine, was analyzed. Telemedicine resulted in an average travel savings of 145 miles and 142 min per visit. This led to an average travel payment savings of $18,555 per year. Telemedicine volume grew significantly over the study period such that by the final year the travel pay savings had increased to $63,804, or about 3.5% of the total travel pay disbursement for that year. The number of mental health telemedicine visits rose over the study period but remained small relative to the number of face-to-face visits. A higher proportion of telemedicine visits involved new patients. Telemedicine at the VA saves travel distance and time, although the reduction in travel payments remains modest at current telemedicine volumes.

Saving Salmon Through Advances in Fluvial Remote Sensing: Applying the Optimal Band Ratio Analysis (OBRA) for Bathymetric Mapping of Over 250 km of River Channel and Habitat Classification

NASA Astrophysics Data System (ADS)

Richardson, R.; Legleiter, C. J.; Harrison, L.

2015-12-01

Salmonids are threatened with extinction across the world from the fragmentation of riverine ecosystems from dams and diversions. In California, efforts to expand the range of spawnable habitat for native salmon by transporting fish around reservoirs is a potentially species saving idea. But, strong scientific evidence of the amount of high quality habitat is required to make these difficult management decisions. Remote sensing has long been used in fluvial settings to identify physical parameters that drive the quality of aquatic habitat; however, the true strength of remote sensing to cover large spatial extents has not been applied with the resolution that is relevant to salmonids. This project utilizes hyperspectral data of over 250 km of the Tuolumne and Merced Rivers to extract depth and bed slope from the wetted channel and NIR LiDAR for the surrounding topography. The Optimal Band Ratio Analysis (OBRA) has proven as an effective tool to create bathymetric maps of river channels in ideal settings with clear water, high amounts of bottom reflectance, and less than 3 meters deep over short distances. Results from this study show that OBRA can be applied over larger riverscapes at high resolutions (0.5 m). The depth and bed slope estimations are used to classify habitat units that are crucial to quantifying the quality and amount of habitat in these river that once produced large populations of native salmonids. As more managers look to expand habitat for these threatened species the tools developed here will be cost effective over the large extents that salmon migrate to spawn.

Telemedicine can make healthcare greener.

PubMed

Yellowlees, Peter M; Chorba, Kathy; Burke Parish, Michelle; Wynn-Jones, Hannah; Nafiz, Najia

2010-03-01

The American healthcare industry is generally lacking environmentally sustainable practices. The environmental impact of healthcare practices in the country has been largely disregarded due to ambivalence, ignorance, and fears of additional costs and regulations. The current practices continue to pollute the environment by requiring large amounts of travel and paperwork by both the patient and the clinician. Telemedicine and health information technology help save time, energy, raw materials (such as paper and plastic), and fuel, thereby lowering the carbon footprint of the health industry. By implementing green practices, for instance, by engaging in carbon credit programs, the health industry could benefit financially as well as reduce its negative impact on the health of our planet. Companies that reduce their carbon emissions by implementing energy-saving practices can sell their carbon credits to companies that emit more carbon than permissible by their legally binding commitment. These carbon profits can then be used for healthcare research or to provide healthcare to the underserved. Alternatively, the savings could be used for green purchasing and to implement other carbon-reducing activities. This report reviews the numerous possible options for the American health industry to become greener and lower its carbon footprint while at the same time becoming more time- and cost efficient.

30 CFR 260.102 - What definitions apply to this subpart?

Code of Federal Regulations, 2011 CFR

2011-07-01

... United States, as specified in the lease, in the amount or value of the production saved, removed, or..., in the amount or value of the production saved, removed, or sold. OCS lease sale means the Department... minutes West longitude. (See part 203 of this title.) Production period means the period during which the...

24 CFR 242.43 - Application of cost savings.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Application of cost savings. 242.43... MORTGAGE INSURANCE FOR HOSPITALS Endorsement for Insurance § 242.43 Application of cost savings. At the sole discretion of HUD, any cost savings shall be used to: (a) Reduce the principal amount of the...

How America Saves for College, 2014: Sallie Mae's National Study of Parents with Children under Age 18

ERIC Educational Resources Information Center

Sallie Mae, Inc., 2014

2014-01-01

This is the fourth report in the Sallie Mae series "How America Saves for College," which launched in 2009. To understand how American families are planning for their children's education, the study captures data on parents' decision-making about savings, the use of savings vehicles, and the amount they save, as well as attitudes toward…

Cloud-Based Distributed Control of Unmanned Systems

DTIC Science & Technology

2015-04-01

during mission execution. At best, the data is saved onto hard-drives and is accessible only by the local team. Data history in a form available and...following open source technologies: GeoServer, OpenLayers, PostgreSQL , and PostGIS are chosen to implement the back-end database and server. A brief...geospatial map data. 3. PostgreSQL : An SQL-compliant object-relational database that easily scales to accommodate large amounts of data - upwards to

Energy Savings Measure Packages. Existing Homes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Casey, Sean; Booten, Chuck

2011-11-01

This document presents the most cost effective Energy Savings Measure Packages (ESMP) for existing mixed-fuel and all electric homes to achieve 15% and 30% savings for each BetterBuildings grantee location across the United States. These packages are optimized for minimum cost to homeowners for source energy savings given the local climate and prevalent building characteristics (i.e. foundation types). Maximum cost savings are typically found between 30% and 50% energy savings over the reference home; this typically amounts to $300 - $700/year.

Energy and Economic Impacts of U.S. Federal Energy and Water Conservation Standards Adopted From 1987 Through 2015

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meyers, Stephen; Williams, Alison; Chan, Peter

This paper presents estimates of the key impacts of Federal energy and water conservation standards adopted from 1987 through 2015. The standards for consumer products and commercial and industrial equipment include those set by legislation as well as standards adopted by DOE through rulemaking. In 2015, the standards saved an estimated 4.49 quads of primary energy, which is equivalent to 5% of total U.S. energy consumption. The savings in operating costs for households and businesses totaled $63.4 billion. The average household saved $320 in operating costs as a result of residential appliance standards. The estimated reduction in CO2 emissions associatedmore » with the standards in 2015 was 238 million metric tons, which is equivalent to 4.3% of total U.S. CO2 emissions. The estimated cumulative energy savings over the period 1990-2090 amount to 216.9 quads. Accounting for the increased upfront costs of more-efficient products and the operating cost (energy and water) savings over the products’ lifetime, the standards have a cumulative net present value (NPV) of consumer benefit of between $1,627 billion and $1,887 billion, using 7 percent and 3 percent discount rates, respectively. The water conservation standards, together with energy conservation standards that also save water, reduced water use by 1.9 trillion gallons in 2015 and estimated cumulative water savings by 2090 amount to 55 trillion gallons. The estimated consumer savings in 2015 from reduced water use amounted to $12 billon.« less

31 CFR 351.44 - What amount of definitive Series EE savings bonds may I purchase per year?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false What amount of definitive Series EE savings bonds may I purchase per year? 351.44 Section 351.44 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) FISCAL SERVICE, DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC...

31 CFR 359.50 - What amount of book-entry Series I savings bonds may I acquire per year?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false What amount of book-entry Series I savings bonds may I acquire per year? 359.50 Section 359.50 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) FISCAL SERVICE, DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC...

31 CFR 359.29 - What amount of definitive Series I savings bonds may I purchase per year?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false What amount of definitive Series I savings bonds may I purchase per year? 359.29 Section 359.29 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) FISCAL SERVICE, DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC...

The Timmons Savings Plan: A Working Document on a Plan to Encourage Families to Save for College.

ERIC Educational Resources Information Center

Tierney, Michael L.

The Timmons Savings Plan, which encourages families to save toward college costs, is analyzed. This plan allows for periodic (non-tax deductible) contributions to an account administered by the U.S. Department of the Treasury. The amount deposited would be matched by the federal government in exchange for the government's earning the interest on…

Energy 101: Energy Efficient Data Centers

ScienceCinema

None

2018-04-16

Data centers provide mission-critical computing functions vital to the daily operation of top U.S. economic, scientific, and technological organizations. These data centers consume large amounts of energy to run and maintain their computer systems, servers, and associated high-performance components—up to 3% of all U.S. electricity powers data centers. And as more information comes online, data centers will consume even more energy. Data centers can become more energy efficient by incorporating features like power-saving "stand-by" modes, energy monitoring software, and efficient cooling systems instead of energy-intensive air conditioners. These and other efficiency improvements to data centers can produce significant energy savings, reduce the load on the electric grid, and help protect the nation by increasing the reliability of critical computer operations.

31 CFR 315.10 - Limitations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... applicable to each series of bonds and savings notes for each specific year, which has varied from time to..., DEPARTMENT OF THE TREASURY BUREAU OF THE FISCAL SERVICE REGULATIONS GOVERNING U.S. SAVINGS BONDS, SERIES A, B... Limitations. Specific limitations have been placed on the amounts of bonds of each series and savings notes...

Immunoinformatics: an integrated scenario

PubMed Central

Tomar, Namrata; De, Rajat K

2010-01-01

Genome sequencing of humans and other organisms has led to the accumulation of huge amounts of data, which include immunologically relevant data. A large volume of clinical data has been deposited in several immunological databases and as a result immunoinformatics has emerged as an important field which acts as an intersection between experimental immunology and computational approaches. It not only helps in dealing with the huge amount of data but also plays a role in defining new hypotheses related to immune responses. This article reviews classical immunology, different databases and prediction tools. It also describes applications of immunoinformatics in designing in silico vaccination and immune system modelling. All these efforts save time and reduce cost. PMID:20722763

31 CFR 359.33 - What happens if I purchase definitive Series I savings bonds in excess of the maximum amount?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false What happens if I purchase definitive Series I savings bonds in excess of the maximum amount? 359.33 Section 359.33 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) FISCAL SERVICE, DEPARTMENT OF THE TREASURY BUREAU OF THE...

Use of cloud computing in biomedicine.

PubMed

Sobeslav, Vladimir; Maresova, Petra; Krejcar, Ondrej; Franca, Tanos C C; Kuca, Kamil

2016-12-01

Nowadays, biomedicine is characterised by a growing need for processing of large amounts of data in real time. This leads to new requirements for information and communication technologies (ICT). Cloud computing offers a solution to these requirements and provides many advantages, such as cost savings, elasticity and scalability of using ICT. The aim of this paper is to explore the concept of cloud computing and the related use of this concept in the area of biomedicine. Authors offer a comprehensive analysis of the implementation of the cloud computing approach in biomedical research, decomposed into infrastructure, platform and service layer, and a recommendation for processing large amounts of data in biomedicine. Firstly, the paper describes the appropriate forms and technological solutions of cloud computing. Secondly, the high-end computing paradigm of cloud computing aspects is analysed. Finally, the potential and current use of applications in scientific research of this technology in biomedicine is discussed.

Evaluation of Irrigation Water Use Efficiency and Water-saving in the Middle Oasis of Heihe River Basin Using a Distributed Agro-hydrological Model

NASA Astrophysics Data System (ADS)

Jiang, Y.; Huang, G., Sr.; Xu, X.; Huang, Q.; Huo, Z.

2015-12-01

Severe water scarcity and unreasonable allocation are threatening the eco-environment in the Heihe River basin (HRB), an arid and semi-arid watershed in Northwest China. The water use in the middle oasis accounts for about 70% of the total water use in the HRB, in which over 85% are consumed by irrigated agriculture. Thus the regional assessment and improvement of irrigation water use are quite essential for water-saving and eco-environmental sustainability. This paper applied a distributed agro-hydrological model (SWAP-EPIC) integrated with ArcGIS to investigate the irrigation water use efficiency (WUE) in the middle oasis. The detailed distributed data in 2012, including soil properties, irrigation schedules, crop pattern and calendar, were collected and used in the regional simulation. The spatial-temporal distribution of LAI and evapotranspiration (ETa) from remote sensing were used as observations to calibrate the model. Results showed that the simulation data was in a good agreement with the observation one. The relative WUE (i.e. divided by the mean value) ranged from 0.77 to 1.33 in different canal command areas. Large spatial variations of WUE were mainly caused by the non-uniform distribution of irrigation water. The present irrigation performance was poor, and only 50% of total irrigation amount was finally utilized through evapotranspiration in the whole district. While nearly 24% of the irrigation water were lost through field deep percolation and 26% were wasted in canal conveyance. Further analysis of water-saving scenarios was conducted through applying the improved irrigation schedule for each crop-soil unites and increasing the canal conveyance efficiency. Prediction showed that 15% of total irrigation amount can be saved without reduction of crop yield.

32 CFR Appendix to Part 162 - Reporting Procedures

Code of Federal Regulations, 2014 CFR

2014-07-01

... generated. e. Projected Life-Cycle Savings. For each PIF project provide the estimated amount of savings the project is projected to earn over the project's economic life. f. Projected Life-Cycle Cost Avoidance. For... Projected Life-Cycle Savings. e. Total Projected Life-Cycle Cost Avoidance. 3. CSI. Each DoD Component that...

31 CFR 315.10 - Limitations.

Code of Federal Regulations, 2013 CFR

2013-07-01

... each series of bonds and savings notes for each specific year, which has varied from time to time, can..., DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT REGULATIONS GOVERNING U.S. SAVINGS BONDS, SERIES A, B, C.... Specific limitations have been placed on the amounts of bonds of each series and savings notes that might...

31 CFR 315.10 - Limitations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... each series of bonds and savings notes for each specific year, which has varied from time to time, can..., DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT REGULATIONS GOVERNING U.S. SAVINGS BONDS, SERIES A, B, C.... Specific limitations have been placed on the amounts of bonds of each series and savings notes that might...

31 CFR 315.10 - Limitations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... each series of bonds and savings notes for each specific year, which has varied from time to time, can..., DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT REGULATIONS GOVERNING U.S. SAVINGS BONDS, SERIES A, B, C.... Specific limitations have been placed on the amounts of bonds of each series and savings notes that might...

31 CFR 315.10 - Limitations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... each series of bonds and savings notes for each specific year, which has varied from time to time, can..., DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT REGULATIONS GOVERNING U.S. SAVINGS BONDS, SERIES A, B, C.... Specific limitations have been placed on the amounts of bonds of each series and savings notes that might...

A method for data handling numerical results in parallel OpenFOAM simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anton, Alin; Muntean, Sebastian

Parallel computational fluid dynamics simulations produce vast amount of numerical result data. This paper introduces a method for reducing the size of the data by replaying the interprocessor traffic. The results are recovered only in certain regions of interest configured by the user. A known test case is used for several mesh partitioning scenarios using the OpenFOAM toolkit{sup ®}[1]. The space savings obtained with classic algorithms remain constant for more than 60 Gb of floating point data. Our method is most efficient on large simulation meshes and is much better suited for compressing large scale simulation results than the regular algorithms.

Social factors of mental disorder and suicide in Japan-for understanding circumstance of suicides in each prefecture-.

PubMed

Motohashi, Hideyuki; Fujimoto, Atsuko; Sakane, Toshiyasu; Yamamoto, Akira; Yano, Yoshitaka

2013-01-01

In recent years there have been over 30000 suicides annually in Japan. This is one of the most serious problems for Japanese society. Because mental disorder is closely associated with suicide, factors related to the increase in mental disorders and suicides should be clarified. In this study, various data regarding social factors were evaluated to assess the correlation of the number of patients with mental disorders and suicides among the 47 prefectures of Japan. Various data regarding social factors, such as income, savings, or rate of divorce, were obtained from the database of the Ministry of Health, Labour and Welfare of Japan. Among the factors, the annual income and the amount of savings were significantly correlated with the number of patients with mental disorder. On the other hand, while the annual income did not have a significant correlation with suicides, the amount of savings had a significant correlation with suicides. In conclusion, the annual income and amount of savings may both be one of the important factors involved in mental disorders, and the savings may also be a factor affecting suicides. These analyses are valuable in helping to clarify the causes of mental disease, and can hopefully contribute to the health and welfare of Japanese.

Fire-Resistant Hydrogel-Fabric Laminates: A Simple Concept That May Save Lives.

PubMed

Illeperuma, Widusha R K; Rothemund, Philipp; Suo, Zhigang; Vlassak, Joost J

2016-01-27

There is a large demand for fabrics that can survive high-temperature fires for an extended period of time, and protect the skin from burn injuries. Even though fire-resistant polymer fabrics are commercially available, many of these fabrics are expensive, decompose rapidly, and/or become very hot when exposed to high temperatures. We have developed a new class of fire-retarding materials by laminating a hydrogel and a fabric. The hydrogel contains around 90% water, which has a large heat capacity and enthalpy of vaporization. When the laminate is exposed to fire, a large amount of energy is absorbed as water heats up and evaporates. The temperature of the hydrogel cannot exceed 100 °C until it is fully dehydrated. The fabric has a low thermal conductivity and maintains the temperature gradient between the hydrogel and the skin. The laminates are fabricated using a recently developed tough hydrogel to ensure integrity of the laminate during processing and use. A thermal model predicts the performance of the laminates and shows that they have excellent heat resistance in good agreement with experiments, making them viable candidates in life saving applications such as fire-resistant blankets or apparel.

RESULTS FROM THE U.S. DOE 2006 SAVE ENERGY NOW ASSESSMENT INITIATIVE: DOE's Partnership with U.S. Industry to Reduce Energy Consumption, Energy Costs, and Carbon Dioxide Emissions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wright, Anthony L; Martin, Michaela A; Gemmer, Bob

In the wake of Hurricane Katrina and other severe storms in 2005, natural gas supplies were restricted, prices rose, and industry sought ways to reduce its natural gas use and costs. In October 2005, U.S. Department of Energy (DOE) Energy Secretary Bodman launched his Easy Ways to Save Energy campaign with a promise to provide energy assessments to 200 of the largest U.S. manufacturing plants. A major thrust of the campaign was to ensure that the nation's natural gas supplies would be adequate for all Americans, especially during home heating seasons. In a presentation to the National Press Club onmore » October 3, 2005, Secretary Bodman said: 'America's businesses, factories, and manufacturing facilities use massive amounts of energy. To help them during this period of tightening supply and rising costs, our Department is sending teams of qualified efficiency experts to 200 of the nation's most energy-intensive factories. Our Energy Saving Teams will work with on-site managers on ways to conserve energy and use it more efficiently.' DOE's Industrial Technologies Program (ITP) responded to the Secretary's campaign with its Save Energy Now initiative, featuring a new and highly cost-effective form of energy assessments. The approach for these assessments drew heavily on the existing resources of ITP's Technology Delivery component. Over the years, ITP-Technology Delivery had worked with industry partners to assemble a suite of respected software decision tools, proven assessment protocols, training curricula, certified experts, and strong partnerships for deployment. Because of the program's earlier activities and the resources that had been developed, ITP was prepared to respond swiftly and effectively to the sudden need to promote improved industrial energy efficiency. Because of anticipated supply issues in the natural gas sector, the Save Energy Now initiative strategically focused on natural gas savings and targeted the nation's largest manufacturing plants--those that consume a total of 1 trillion British thermal units (Btu) or more annually. The approximately 6800 U.S. facilities that fall into this category collectively account for about 53% of all energy consumed by industry in the United States. The 2006 Save Energy Now energy assessments departed from earlier DOE plant assessments by concentrating solely on steam and process heating systems, which are estimated to account for approximately 74% of all natural gas use for manufacturing. The assessments also integrated a strong training component designed to teach industrial plant personnel how to use DOE's steam or process heating opportunity assessment software tools. This approach had the advantages of promoting strong buy-in of plant personnel for the assessment and its outcomes and preparing them better to independently replicate the assessment process at the company's other facilities. The Save Energy Now initiative also included provisions to help plants that applied for but did not qualify for assessments (based on the 1 trillion Btu criterion). Services offered to these plants included (1) an assessment by one of DOE's 26 university-based Industrial Assessment Centers (IACs), (2) a telephone consultation with a systems expert at the DOE's Energy Efficiency and Renewable Energy Information Center, or (3) other technical materials and services available through ITP (e.g., the Save Energy Now CD). By the end of 2006, DOE had completed all 200 of the promised assessments, identifying potential natural gas savings of more than 50 trillion Btu and energy cost savings of about $500 million. These savings, if fully implemented, could reduce CO2 emissions by 4.04 million metric tons annually. These results, along with the fact that a large percentage of U.S. energy is used by a relatively small number of very large plants, clearly suggest that assessments are an expedient and cost-effective way to significantly affect large amounts of energy use. Building on the success of the 2006 initiative, ITP has expanded the effort in 2007 with the goal of conducting 250 more assessments in large U.S. industrial plants. The 2007 assessments are addressing not only steam and process heating, but also pumping, compressed air, and fan systems. The full report reviews the tools and resources developed by the DOE ITP program before 2006, which are the foundation and catalyst for the Save Energy Now assessment efforts. The report describes the process by which industrial plants applied to obtain assessments in 2006 and the overall process and philosophy of conducting assessments. A comprehensive review of the results from the 2006 assessments is presented, along with a summary of key accomplishments and findings.« less

Reversible Parallel Discrete-Event Execution of Large-scale Epidemic Outbreak Models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Perumalla, Kalyan S; Seal, Sudip K

2010-01-01

The spatial scale, runtime speed and behavioral detail of epidemic outbreak simulations together require the use of large-scale parallel processing. In this paper, an optimistic parallel discrete event execution of a reaction-diffusion simulation model of epidemic outbreaks is presented, with an implementation over themore » $$\\mu$$sik simulator. Rollback support is achieved with the development of a novel reversible model that combines reverse computation with a small amount of incremental state saving. Parallel speedup and other runtime performance metrics of the simulation are tested on a small (8,192-core) Blue Gene / P system, while scalability is demonstrated on 65,536 cores of a large Cray XT5 system. Scenarios representing large population sizes (up to several hundred million individuals in the largest case) are exercised.« less

ACON: a multipurpose production controller for plasma physics codes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Snell, C.

1983-01-01

ACON is a BCON controller designed to run large production codes on the CTSS Cray-1 or the LTSS 7600 computers. ACON can also be operated interactively, with input from the user's terminal. The controller can run one code or a sequence of up to ten codes during the same job. Options are available to get and save Mass storage files, to perform Historian file updating operations, to compile and load source files, and to send out print and film files. Special features include ability to retry after Mass failures, backup options for saving files, startup messages for the various codes,more » and ability to reserve specified amounts of computer time after successive code runs. ACON's flexibility and power make it useful for running a number of different production codes.« less

31 CFR 363.55 - May I transfer my book-entry savings bonds to another person?

Code of Federal Regulations, 2010 CFR

2010-07-01

... REGULATIONS GOVERNING SECURITIES HELD IN TREASURYDIRECT Book-Entry Savings Bonds Purchased Through Treasury... a minimum amount of $25. The transfer may only be made as a gift or in response to a final judgment... is a gift or a specified exception. (b) We do not permit the transfer of savings bonds for...

Directions for lunar construction - A derivation of requirements from a construction scenario analysis

NASA Technical Reports Server (NTRS)

Dias, William S.; Matijevic, Jacob R.; Venkataraman, Subramani T.; Smith, Jeffrey H.; Lindemann, Randel A.; Levin, Richard R.

1992-01-01

This paper provides an initial trade-off study among several lunar construction options available to the Space Exploration Initiative. The relative time effectiveness of Extra-Vehicular Activity (EVA), Intra-Vehicular Activity (IVA), and Earth-based remote control assembly and construction methods are studied. Also considered is whether there is any construction time savings to building roads in advance, or surveying the construction sites with orbiters or rovers in advance. The study was conducted by adding detail to a potentially real scenario - a nuclear power plant - and applying time multipliers for the various control options and terrain alternatives, provided by roboticists among the authors. The authors conclude that IVA is a faster construction method than either EVA or construction conducted remotely from Earth. Surveying proposed sites in advance, with orbiters and rovers, provides a significant time savings through adding to certainty, and therefore may be cost effective. Developing a heavy-lift launch capability and minimizing assembly and construction processes by landing large payloads is probably worthwhile to the degree possible, as construction activities would use a large amount of surface operations time.

Impact of the Removal of the Monthly Liver Function Test Requirement for Ambrisentan

PubMed Central

Durst, Louise A.; Carlsen, John; Kuchinski, Megan; Harner, Lauren; Neves, Daniel; Harris, Stephanie J.; Traiger, Glenna L.

2012-01-01

Background The management of patients with pulmonary arterial hypertension (PAH) requires extensive coordination between patients, their support system, third-party payers, and healthcare professionals. For patients with PAH who are receiving endothelin receptor antagonists (ERAs), such cross-stakeholder coordination was needed to ensure compliance with a US Food and Drug Administration (FDA) Risk Evaluation and Mitigation Strategy (REMS) requirement for monthly liver function tests (LFTs). In March 2011, the FDA removed this requirement for ambrisentan (Letairis) in conjunction with a change to the product label. Objective This study sought to explore the impact of the ambrisentan label change on payers, providers who treat PAH, and specialty pharmacies. Methods This study, conducted in June and July 2011, involved telephone interviews with 5 medical/pharmacy directors in commercial health plans (representing 78,345,000 covered lives collectively); written surveys and telephone interviews with 6 nurses managing patients with PAH; and written surveys and telephone interviews with 4 staff members from specialty pharmacies to determine direct and indirect cost-savings associated with the removal of the monthly LFT requirement for ambrisentan. Qualitative telephone interviews with payer decision makers informed the cost-savings for payers. Direct cost-savings were calculated from the responses of the nurses managing PAH regarding the prescribing trends of their practices and the frequency of LFTs. Indirect cost-savings were calculated using time-savings data collected from the PAH-managing nurses and the specialty pharmacy staff, as well as from the US Bureau of Labor Statistics data regarding national wage averages for the respective staff. Results: Payers reported that REMS requirements did not play a large role in their plan's coverage or management of ERAs; although direct cost-savings resulting from the label change were an estimated $28 per patient per month, this amount is relatively small compared with the overall cost of PAH treatment for payers. The impact of the ambrisentan label change was more significant for providers and specialty pharmacies. The label change resulted in a significant, average 69% reduction in the frequency of LFTs for patients using ambrisentan. The average monthly time-savings realized by providers as a result of the label change was 12 minutes per patient receiving ambrisentan, and the average monthly direct and indirect cost-savings totaled $10.75 and $29.75, respectively, per patient taking ambrisentan. Telephone interviews with specialty pharmacies indicated that the average monthly time-savings for the 4 specialty pharmacies surveyed was 14 minutes per patient using ambrisentan, representing an 86.7% decrease in the amount of time specialty pharmacies spent on LFT-related administrative tasks for patients using ambrisentan. Conclusion Findings from this study indicate that the ambrisentan label change significantly reduced the number of LFTs for patients with PAH, resulting in time-savings or cost-savings for payers, providers, and specialty pharmacies. PMID:24991314

Spaceport Command and Control System Software Development

NASA Technical Reports Server (NTRS)

Glasser, Abraham

2017-01-01

The Spaceport Command and Control System (SCCS) is the National Aeronautics and Space Administration's (NASA) launch control system for the Orion capsule and Space Launch System, the next generation manned rocket currently in development. This large system requires a large amount of intensive testing that will properly measure the capabilities of the system. Automating the test procedures would save the project money from human labor costs, as well as making the testing process more efficient. Therefore, the Exploration Systems Division (formerly the Electrical Engineering Division) at Kennedy Space Center (KSC) has recruited interns for the past two years to work alongside full-time engineers to develop these automated tests, as well as innovate upon the current automation process.

Should the next standby power target be 0-watt?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meier, Alan; Siderius, Hans-Paul

The standby power use of appliances continues to consume large amounts of electricity. Considerable success has been made in reducing each device’s use, but these savings have been offset by a huge increase in the number of products using standby power and new power requirements for maintaining network connections. Current strategies to reduce standby have limitations and may not be most appropriate for emerging energy consumption trends. A new strategy for further reductions in standby, the “Standzero” option, encourages electrical products to be designed to operate for short periods without relying on mains-supplied electricity. Energy savings are achieved through enhancedmore » efficiency and by harvesting ambient energy. A sensitivity analysis suggests many appliances could be designed to operate for at least an hour without relying on mains power and, in some cases, may be able to operate indefinitely at zero watts until activated.« less

Social Security and Saving: A Time-Series Econometrics Pedagogical Example (With "R" Code)

ERIC Educational Resources Information Center

Wassell, Charles S., Jr.

2018-01-01

In 1974, and then again in 1996, Martin Feldstein published studies of the impact of the Social Security system on private saving in the U.S. economy. He found that Social Security depressed personal saving by a substantial amount--up to 50 percent. The author uses the Feldstein data and empirical models in this article to illustrate the steps in…

Economical ground data delivery

NASA Technical Reports Server (NTRS)

Markley, Richard W.; Byrne, Russell H.; Bromberg, Daniel E.

1994-01-01

Data delivery in the Deep Space Network (DSN) involves transmission of a small amount of constant, high-priority traffic and a large amount of bursty, low priority data. The bursty traffic may be initially buffered and then metered back slowly as bandwidth becomes available. Today both types of data are transmitted over dedicated leased circuits. The authors investigated the potential of saving money by designing a hybrid communications architecture that uses leased circuits for high-priority network communications and dial-up circuits for low-priority traffic. Such an architecture may significantly reduce costs and provide an emergency backup. The architecture presented here may also be applied to any ground station-to-customer network within the range of a common carrier. The authors compare estimated costs for various scenarios and suggest security safeguards that should be considered.

Optimization of cDNA-AFLP experiments using genomic sequence data.

PubMed

Kivioja, Teemu; Arvas, Mikko; Saloheimo, Markku; Penttilä, Merja; Ukkonen, Esko

2005-06-01

cDNA amplified fragment length polymorphism (cDNA-AFLP) is one of the few genome-wide level expression profiling methods capable of finding genes that have not yet been cloned or even predicted from sequence but have interesting expression patterns under the studied conditions. In cDNA-AFLP, a complex cDNA mixture is divided into small subsets using restriction enzymes and selective PCR. A large cDNA-AFLP experiment can require a substantial amount of resources, such as hundreds of PCR amplifications and gel electrophoresis runs, followed by manual cutting of a large number of bands from the gels. Our aim was to test whether this workload can be reduced by rational design of the experiment. We used the available genomic sequence information to optimize cDNA-AFLP experiments beforehand so that as many transcripts as possible could be profiled with a given amount of resources. Optimization of the selection of both restriction enzymes and selective primers for cDNA-AFLP experiments has not been performed previously. The in silico tests performed suggest that substantial amounts of resources can be saved by the optimization of cDNA-AFLP experiments.

Pattern Recognition for a Flight Dynamics Monte Carlo Simulation

NASA Technical Reports Server (NTRS)

Restrepo, Carolina; Hurtado, John E.

2011-01-01

The design, analysis, and verification and validation of a spacecraft relies heavily on Monte Carlo simulations. Modern computational techniques are able to generate large amounts of Monte Carlo data but flight dynamics engineers lack the time and resources to analyze it all. The growing amounts of data combined with the diminished available time of engineers motivates the need to automate the analysis process. Pattern recognition algorithms are an innovative way of analyzing flight dynamics data efficiently. They can search large data sets for specific patterns and highlight critical variables so analysts can focus their analysis efforts. This work combines a few tractable pattern recognition algorithms with basic flight dynamics concepts to build a practical analysis tool for Monte Carlo simulations. Current results show that this tool can quickly and automatically identify individual design parameters, and most importantly, specific combinations of parameters that should be avoided in order to prevent specific system failures. The current version uses a kernel density estimation algorithm and a sequential feature selection algorithm combined with a k-nearest neighbor classifier to find and rank important design parameters. This provides an increased level of confidence in the analysis and saves a significant amount of time.

12 CFR 567.11 - Reservation of authority.

Code of Federal Regulations, 2010 CFR

2010-01-01

... assigned risk weight for any asset, or credit equivalent amount or credit conversion factor for any off... require the savings association to apply another risk-weight, credit equivalent amount, or credit..., credit equivalent amount, or credit conversion factor, OTS may assign any risk weight, credit equivalent...

12 CFR 3.300 - Transitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... amount. (2) Beginning January 1, 2016 through December 31, 2018 a national bank's or Federal savings.... Calendar year 2018 Greater than 1.875 percent (plus 75 percent of any applicable countercyclical capital..., 2018, a national bank or Federal savings association must make all regulatory capital adjustments and...

Beer, Wood, and Welfare ‒ The Impact of Improved Stove Use Among Dolo-Beer Breweries

PubMed Central

2015-01-01

Local beer breweries in Burkina Faso absorb a considerable amount of urban woodfuel demand. We assess the woodfuel savings caused by the adoption of improved brewing stoves by these micro-breweries and estimate the implied welfare effects through the woodfuel market on private households as well as the environmental effect. We find substantial wood savings among the breweries, 36% to 38% if they fully switch to an improved stove. In absolute amounts, they save about 0.176 kg of fuelwood per litre of dolo brewed. These savings imply huge reductions in CO2-emissions and reduce the overall demand for woodfuel, which is predominantly used by the poorer strata for cooking purposes. We provide estimates for the price decrease that might result from this and show that the urban poor are likely to benefit. Thus, the intervention under study is an example for a green growth intervention with pro-poor welfare gains – something green growth strategies should look for. PMID:26244341

Estimates of associated outdoor particulate matter health risk and costs reductions from alternative building, ventilation and filtration scenarios.

PubMed

Sultan, Zuraimi M

2007-05-01

Although many studies have reported calculations of outdoor particulate matter (PM) associated externalities using ambient data, there is little information on the role buildings, their ventilation and filtration play. This study provides the framework to evaluate the health risk and cost reduction of building, ventilation and filtration strategies from outdoor PM pollution on a nationwide level and applied it to a case study in Singapore. Combining Indoor Air Quality (IAQ) and time weighted exposure models, with established concentration-response functions and monetary valuation methods, mortality and morbidity effects of outdoor PM on the population of Singapore under different building, ventilation and filtration strategies were estimated. Different interventions were made to compare the effects from the current building conditions. The findings demonstrate that building protection effect reduced approximately half the attributable health cases amounting to US$17.7 billion due to PM pollution when compared to levels computed using outdoor data alone. For residential buildings, nationwide adoption of natural ventilation from current state is associated with 28% higher cases of mortality and 13 to 38% higher cases for different morbidities, amounting to US$6.7 billion. The incurred cost is negligible compared to energy costs of air-conditioning. However, nationwide adoption of closed residence and air-conditioning are associated with outcomes including fewer mortality (10 and 6% respectively), fewer morbidities (8 and 4% respectively) and economic savings of US$1.5 and 0.9 billion respectively. The related savings were about a factor of 9 the energy cost for air-conditioning. Nationwide adoption of mechanical ventilation and filtration from current natural ventilation in schools is associated with fewer asthma hospital admissions and exacerbations; although the economic impact is not substantial. Enhanced workplace filtration reduces the mortality and morbidity cases by 14 and 13% respectively amounting to savings of up to US$2.4 billion. The huge costs savings are comparable to the average worker salary and insignificant to energy, installation and rental cost. Despite uncertainty about accurate benefits, this study shows that health and economic gain via different building, ventilation and filtration designs in minimizing ingress of outdoor PM applied to a nationwide scale can be very large. Importantly, the results suggest that PM associated externalities and legislative efforts should not only focus on ambient PM reduction policies but also include building-informed decisions.

Energy and Economic Impacts of U.S. Federal Energy and Water Conservation Standards Adopted From 1987 Through 2013

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meyers, Stephen; Williams, Alison; Chan, Peter

This paper presents estimates of the key impacts of Federal energy and water conservation standards adopted from 1987 through 2013. The standards for consumer products and commercial and industrial equipment include those set by legislation as well as standards adopted by DOE through rulemaking. In 2013, the standards saved an estimated 4.05 quads of primary energy, which is equivalent to 4% of total U.S. energy consumption. The savings in operating costs for households and businesses totaledmore » $56 billion. The average household saved $$361 in operating costs as a result of residential and plumbing product standards. The estimated reduction in CO{sub 2} emissions associated with the standards in 2013 was 218 million metric tons, which is equivalent to 4% of total U.S. CO{sub 2} emissions. The estimated cumulative energy savings over the period 1990-2090 amount to 181 quads. Accounting for the increased upfront costs of more-efficient products and the operating cost (energy and water) savings over the products’ lifetime, the standards have a past and projected cumulative net present value (NPV) of consumer benefit of between $$1,271 billion and $1,487 billion, using 7 percent and 3 percent discount rates, respectively. The water conservation standards, together with energy conservation standards that also save water, reduced water use by 1.9 trillion gallons in 2013, and will achieve cumulative water savings by 2090 of 55 trillion gallons. The estimated consumer savings in 2013 from reduced water use amounted to $16 billon.« less

Energy and Economic Impacts of U.S. Federal Energy and Water Conservation Standards Adopted From 1987 through 2012

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meyers, Stephen; Williams, Alison; Chan, Peter

This paper presents estimates of the key impacts of Federal energy and water conservation standards adopted from 1987 through 2012. The standards for consumer products and commercial and industrial equipment include those set by legislation as well as standards adopted by DOE through rulemaking. In 2012, the standards saved an estimated 3.6 quads of primary energy, which is equivalent to 3% of total U.S. energy consumption. The savings in operating costs for households and businesses totaled $51.4 billion. The average household saved $347 in operating costs as a result of residential and plumbing product standards. The estimated reduction in CO2more » emissions associated with the standards in 2012 was 198 million metric tons, which is equivalent to 3% of total U.S. CO2 emissions. The estimated cumulative energy savings over the period 1990-2070 amount to 179 quads. Accounting for the increased upfront costs of more-efficient products and the operating cost (energy and water) savings over the products’ lifetime, the standards have a past and projected cumulative net present value (NPV) of consumer benefit of between $1,104 billion and $1,390 billion, using 7 percent and 3 percent discount rates, respectively. The water conservation standards, together with energy conservation standards that also save water, reduced water use by 1.8 trillion gallons in 2012, and will achieve cumulative water savings by 2040 of 54 trillion gallons. The estimated consumer savings in 2012 from reduced water use amounted to $13 billon.« less

12 CFR 362.11 - Activities of insured State savings associations.

Code of Federal Regulations, 2011 CFR

2011-01-01

... amount exceeding that described in section 5(c)(2)(B) of HOLA (12 U.S.C. 1464(c)(2)(B)), unless one of... section 5(c)(2)(B) of HOLA, if the savings association files a notice in compliance with § 303.141 of this...

Comparative study of irrigation water use and groundwater recharge under various irrigation schemes in an agricultural region, central Taiwan

NASA Astrophysics Data System (ADS)

Chen, Shih-Kai; Jang, Cheng-Shin; Tsai, Cheng-Bin

2016-04-01

The risk of rice production has increased notably due to climate change in Taiwan. To respond to growing agricultural water shortage without affecting normal food production in the future, the application of water-saving irrigation will be a substantial resolution. However, the adoption of water-saving irrigation may result in the reducing of groundwater recharge because continuous flooding in the paddy fields could be regarded as an important source for groundwater recharge. The aim of this study was to evaluate the irrigation water-saving benefit and groundwater recharge deficit when adopting the System of Rice Intensification, known as SRI methodology, in the Choushui River alluvial fan (the largest groundwater pumping and the most important rice-cropping region in central Taiwan). The three-dimensional finite element groundwater model, FEMWATER, was applied to simulate the infiltration process and groundwater recharge under SRI methodology and traditional irrigation schemes including continuous irrigation, and rotational irrigation in two rice-crop periods with hydro-climatic data of 2013. The irrigation water use was then calculated by water balance. The results showed that groundwater recharge amount of SRI methodology was slightly lower than those of traditional irrigation schemes, reduced 3.6% and 1.6% in the first crop period, and reduced 3.2% and 1.6% in the second crop period, compared with continuous irrigation and rotational irrigation, respectively. However, the SRI methodology achieved notably water-saving benefit compared to the disadvantage of reducing the groundwater recharge amount. The field irrigation requirement amount of SRI methodology was significantly lower than those of traditional irrigation schemes, saving 37% and 20% of irrigation water in the first crop period, and saving 53% and 35% in the second crop period, compared with continuous irrigation and rotational irrigation, respectively. Therefore, the amount of groundwater pumping for irrigation water use can be reduced when adopting the SRI methodology in the future. The reducing of groundwater recharge could be supplemented by using 1,500 hectares of fallow paddy fields, located at proximal-fan region, as recharge pools in the wet season. The adoption of water-saving irrigation would be helpful for the relevant government agency to formulate the integral water resource management strategies in this region. Keywords:Groundwater recharge, SRI, FEMWATER, Field irrigation requirement

Coordinated platooning with multiple speeds

DOE PAGES

Luo, Fengqiao; Larson, Jeffrey; Munson, Todd

2018-03-22

In a platoon, vehicles travel one after another with small intervehicle distances; trailing vehicles in a platoon save fuel because they experience less aerodynamic drag. This work presents a coordinated platooning model with multiple speed options that integrates scheduling, routing, speed selection, and platoon formation/dissolution in a mixed-integer linear program that minimizes the total fuel consumed by a set of vehicles while traveling between their respective origins and destinations. The performance of this model is numerically tested on a grid network and the Chicago-area highway network. We find that the fuel-savings factor of a multivehicle system significantly depends on themore » time each vehicle is allowed to stay in the network; this time affects vehicles’ available speed choices, possible routes, and the amount of time for coordinating platoon formation. For problem instances with a large number of vehicles, we propose and test a heuristic decomposed approach that applies a clustering algorithm to partition the set of vehicles and then routes each group separately. When the set of vehicles is large and the available computational time is small, the decomposed approach finds significantly better solutions than does the full model.« less

Coordinated platooning with multiple speeds

DOE Office of Scientific and Technical Information (OSTI.GOV)

Luo, Fengqiao; Larson, Jeffrey; Munson, Todd

In a platoon, vehicles travel one after another with small intervehicle distances; trailing vehicles in a platoon save fuel because they experience less aerodynamic drag. This work presents a coordinated platooning model with multiple speed options that integrates scheduling, routing, speed selection, and platoon formation/dissolution in a mixed-integer linear program that minimizes the total fuel consumed by a set of vehicles while traveling between their respective origins and destinations. The performance of this model is numerically tested on a grid network and the Chicago-area highway network. We find that the fuel-savings factor of a multivehicle system significantly depends on themore » time each vehicle is allowed to stay in the network; this time affects vehicles’ available speed choices, possible routes, and the amount of time for coordinating platoon formation. For problem instances with a large number of vehicles, we propose and test a heuristic decomposed approach that applies a clustering algorithm to partition the set of vehicles and then routes each group separately. When the set of vehicles is large and the available computational time is small, the decomposed approach finds significantly better solutions than does the full model.« less

12 CFR 7.1018 - Automatic payment plan account.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7.1018 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY BANK ACTIVITIES AND... dividends at the current rate paid on regular savings accounts. The depositor, upon reaching a previously designated age, receives his or her accumulated savings and earned interest in installments of equal amounts...

31 CFR 363.59 - What is a payroll savings plan?

Code of Federal Regulations, 2013 CFR

2013-07-01

... recurring basis to your payroll savings plan through the ACH method to purchase a payroll zero-percent certificate of indebtedness. (See Subpart D for more information about a payroll zero-percent certificate of indebtedness.) When you have accumulated a sufficient amount of payroll zero-percent certificate of...

31 CFR 363.59 - What is a payroll savings plan?

Code of Federal Regulations, 2011 CFR

2011-07-01

... recurring basis to your payroll savings plan through the ACH method to purchase a payroll zero-percent certificate of indebtedness. (See Subpart D for more information about a payroll zero-percent certificate of indebtedness.) When you have accumulated a sufficient amount of payroll zero-percent certificate of...

Water consumption and allocation strategies along the river oases of Tarim River based on large-scale hydrological modelling

NASA Astrophysics Data System (ADS)

Yu, Yang; Disse, Markus; Yu, Ruide

2016-04-01

With the mainstream of 1,321km and located in an arid area in northwest China, the Tarim River is China's longest inland river. The Tarim basin on the northern edge of the Taklamakan desert is an extremely arid region. In this region, agricultural water consumption and allocation management are crucial to address the conflicts among irrigation water users from upstream to downstream. Since 2011, the German Ministry of Science and Education BMBF established the Sino-German SuMaRiO project, for the sustainable management of river oases along the Tarim River. The project aims to contribute to a sustainable land management which explicitly takes into account ecosystem functions and ecosystem services. SuMaRiO will identify realizable management strategies, considering social, economic and ecological criteria. This will have positive effects for nearly 10 million inhabitants of different ethnic groups. The modelling of water consumption and allocation strategies is a core block in the SuMaRiO cluster. A large-scale hydrological model (MIKE HYDRO Basin) was established for the purpose of sustainable agricultural water management in the main stem Tarim River. MIKE HYDRO Basin is an integrated, multipurpose, map-based decision support tool for river basin analysis, planning and management. It provides detailed simulation results concerning water resources and land use in the catchment areas of the river. Calibration data and future predictions based on large amount of data was acquired. The results of model calibration indicated a close correlation between simulated and observed values. Scenarios with the change on irrigation strategies and land use distributions were investigated. Irrigation scenarios revealed that the available irrigation water has significant and varying effects on the yields of different crops. Irrigation water saving could reach up to 40% in the water-saving irrigation scenario. Land use scenarios illustrated that an increase of farmland area in the lower reach gravely aggravated the water deficit, while a decrease of farmland in the upper reaches resulted in considerable benefits for all sub-catchments. A substitution of crops was also investigated, which demonstrated the potential for saving considerable amounts of irrigation water in upper and middle reaches. Overall, the results of this study provide a scientific basis for decision-making on the water consumption and allocation strategies in this arid region.

Energy management system saves $250,000 + fuel -with 4-mo payback

DOE Office of Scientific and Technical Information (OSTI.GOV)

Massey, C.L.; Robe, K.

1980-09-01

Innovations made at Hershey Chocolate Company's Oakdale, California plant eliminated simultaneous cool-reheat-cycles by incorporating dead band controls into existing HVAC systems. Calculated savings of the project are about 90% of former heating and cooling energy usage for HVAC operation. Electric power savings amount to about $75,000/y, and natural gas savings about $185,000/y, using 1980 fuel costs, with an approximate 4-month payback. Because of the reduced demand for chilled water, a smaller water chiller carries full plant load for 4 to 5 months of the year without operating two existing 500-ton units.

New workers' compensation legislation: expected pharmaceutical cost savings.

PubMed

Wilson, Leslie; Gitlin, Matthew

2005-10-01

California Workers' Compensation (WC) system costs are under review. With recently approved California State Assembly Bill (AB) 749 and Senate Bill (SB) 228, an assessment of proposed pharmaceutical cost savings is needed. A large workers' compensation database provided by the California Workers' Compensation Institute (CWCI) and Medi-Cal pharmacy costs obtained from the State Drug Utilization Project are utilized to compare frequency, costs and savings to Workers' Compensation in 2002 with the new pharmacy legislation. Compared to the former California Workers' Compensation fee schedule, the newly implemented 100% Medi-Cal fee schedule will result in savings of 29.5% with a potential total pharmacy cost savings of $125 million. Further statistical analysis demonstrated that a large variability in savings across drugs could not be controlled with this drug pricing system. Despite the large savings in pharmaceuticals, inconsistencies between the two pharmaceutical payment systems could lead to negative incentives and uncertainty for long-term savings. Proposed alternative pricing systems could be considered. However, pain management implemented along with other cost containment strategies could more effectively reduce overall drug spending in the workers' compensation system.

Review of capital investment in economic growth cycle

NASA Astrophysics Data System (ADS)

Shaffie, Siti Salihah; Jaaman, Saiful Hafizah; Mohamad, Daud

2016-11-01

The study of linkages of macroeconomics factors is prominent in order to understand how the economic cycle affects one another. These factors include interest rate, growth rate, saving and capital investment which are mutually correlated to stabilize the GDP. Part of this study, it will look upon the impact of investment which emphasize the efficiency of capital investment to the economic growth. Capital investment is one investment appraisal that gives impact to the economic growth. It is a long term investment and involve with large amount of capital to incorporate the development of private and public capital investment.

Converting information from paper to optical media

NASA Technical Reports Server (NTRS)

Deaton, Timothy N.; Tiller, Bruce K.

1990-01-01

The technology of converting large amounts of paper into electronic form is described for use in information management systems based on optical disk storage. The space savings and photographic nature of microfiche are combined in these systems with the advantages of computerized data (fast and flexible retrieval of graphics and text, simultaneous instant access for multiple users, and easy manipulation of data). It is noted that electronic imaging systems offer a unique opportunity to dramatically increase the productivity and profitability of information systems. Particular attention is given to the CALS (Computer-aided Aquisition and Logistic Support) system.

Clustering-based energy-saving algorithm in ultra-dense network

NASA Astrophysics Data System (ADS)

Huang, Junwei; Zhou, Pengguang; Teng, Deyang; Zhang, Renchi; Xu, Hao

2017-06-01

In Ultra-dense Networks (UDN), dense deployment of low power small base stations will cause serious small cells interference and a large amount of energy consumption. The purpose of this paper is to explore the method of reducing small cells interference and energy saving system in UDN, and we innovatively propose a sleep-waking-active (SWA) scheme. The scheme decreases the user outage causing by failure to detect users’ service requests, shortens the opening time of active base stations directly switching to sleep mode; we further proposes a Vertex Surrounding Clustering(VSC) algorithm, which first colours the small cells with the most strongest interference and next extends to the adjacent small cells. VSC algorithm can use the least colour to stain the small cell, reduce the number of iterations and promote the efficiency of colouring. The simulation results show that SWA scheme can effectively improve the system Energy Efficiency (EE), the VSC algorithm can reduce the small cells interference and optimize the users’ Spectrum Efficiency (SE) and throughput.

Time and moral judgment.

PubMed

Suter, Renata S; Hertwig, Ralph

2011-06-01

Do moral judgments hinge on the time available to render them? According to a recent dual-process model of moral judgment, moral dilemmas that engage emotional processes are likely to result in fast deontological gut reactions. In contrast, consequentialist responses that tot up lives saved and lost in response to such dilemmas would require cognitive control to override the initial response. Cognitive control, however, takes time. In two experiments, we manipulated the time available to arrive at moral judgments in two ways: by allotting a fixed short or large amount of time, and by nudging people to answer swiftly or to deliberate thoroughly. We found that faster responses indeed lead to more deontological responses among those moral dilemmas in which the killing of one to save many necessitates manhandling an innocent person and in which this action is depicted as a means to an end. Thus, our results are the first demonstration that inhibiting cognitive control through manipulations of time alters moral judgments. Copyright © 2011 Elsevier B.V. All rights reserved.

Study on energy saving of subway station based on orthogonal experimental method

NASA Astrophysics Data System (ADS)

Guo, Lei

2017-05-01

With the characteristics of quick, efficient and large amount transport, the subway has become an important way to solve urban traffic congestion. As the subway environment will follow the change of external environment factors such as temperature and load of personnel changes, three-dimensional numerical simulations study is conducted by using CFD software for air distribution of subway platform. The influence of different loads (the supply air temperature and velocity of air condition, personnel load, heat flux of the wall) on the subway platform flow field are also analysed. The orthogonal experiment method is applied to the numerical simulation analysis for human comfort under different parameters. Based on those results, the functional relationship between human comfort and the boundary conditions of the platform is produced by multiple linear regression fitting method, the order of major boundary conditions which affect human comfort is obtained. The above study provides a theoretical basis for the final energy-saving strategies.

Maximizing Energy Savings for Small Businesses | Buildings | NREL

Science.gov Websites

significant amounts of money and energy, increase profits, promote their business, and cut greenhouse gas goals and save money: NREL's four-page lender's guide with discussion on timing and low-cost methods for information and design and decision support guides, available for free download The USDA's Business and

31 CFR Appendix A to Part 359 - Redemption Value Calculations

Code of Federal Regulations, 2010 CFR

2010-07-01

... book-entry Series I savings bonds redemption value calculation? Assume a New Treasury Direct par investment amount in a book-entry Series I savings bonds of $34.59, with an issue date of May, 2001, and a..., 2001 and redeemed December, 2001 = $101.96. Calculation: [(Book-entry par investment) ÷ (100)] × CRV...

31 CFR 316.5 - Limitation on holdings.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., DEPARTMENT OF THE TREASURY BUREAU OF THE FISCAL SERVICE OFFERING OF UNITED STATES SAVINGS BONDS, SERIES E § 316.5 Limitation on holdings. (a) General limitation. The amount of Series E bonds, originally issued... any employee savings plan, as defined in paragraph (b)(1) of this section, at any time during the year...

31 CFR 316.5 - Limitation on holdings.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT OFFERING OF UNITED STATES SAVINGS BONDS, SERIES E § 316.5 Limitation on holdings. (a) General limitation. The amount of Series E bonds, originally issued... any employee savings plan, as defined in paragraph (b)(1) of this section, at any time during the year...

31 CFR 316.5 - Limitation on holdings.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT OFFERING OF UNITED STATES SAVINGS BONDS, SERIES E § 316.5 Limitation on holdings. (a) General limitation. The amount of Series E bonds, originally issued... any employee savings plan, as defined in paragraph (b)(1) of this section, at any time during the year...

12 CFR 195.42 - Data collection, reporting, and disclosure.

Code of Federal Regulations, 2012 CFR

2012-01-01

... calendar year: (1) Small business and small farm loan data. For each geography in which the savings association originated or purchased a small business or small farm loan, the aggregate number and amount of... each small business or small farm loan originated or purchased by the savings association: (1) A unique...

12 CFR 195.42 - Data collection, reporting, and disclosure.

Code of Federal Regulations, 2013 CFR

2013-01-01

... calendar year: (1) Small business and small farm loan data. For each geography in which the savings association originated or purchased a small business or small farm loan, the aggregate number and amount of... each small business or small farm loan originated or purchased by the savings association: (1) A unique...

12 CFR 195.42 - Data collection, reporting, and disclosure.

Code of Federal Regulations, 2014 CFR

2014-01-01

... calendar year: (1) Small business and small farm loan data. For each geography in which the savings association originated or purchased a small business or small farm loan, the aggregate number and amount of... each small business or small farm loan originated or purchased by the savings association: (1) A unique...

Research of intelligent bus coin box

NASA Astrophysics Data System (ADS)

Xin, Shihao

2017-03-01

In the energy-saving emission reduction of the social context, in response to low-carbon travel, buses become the majority of people choose. We have designed this sorting machine for the present situation that the bus company has received a large amount of mixed zero coins and employed a large amount of manpower to sort out and lower the efficiency. Its function is to separate the coins and notes mixed, and the coins sort storage, the display shows the value of the received coins, so that the whole mechanized inventory classification, reduce the cost of clearing up and improve the efficiency of zero cash recycling, use Simple mechanical principles for classification, to be efficient, accurate and practical. Really meet the current city bus companies, commerce and banking and other industries in order to zero notes, zero coins in the actual demand. The size and specification of this machine are designed according to the size of the bus coin box. It is suitable for almost all buses. It can be installed in the coin box directly, real-time sorting and real-time counting. The difficulty of clearing change.

CAPITAL FLOWS, CONSUMPTION BOOMS AND ASSET BUBBLES: A BEHAVIOURAL ALTERNATIVE TO THE SAVINGS GLUT HYPOTHESIS

PubMed Central

Laibson, David; Mollerstrom, Johanna

2012-01-01

Bernanke (2005) hypothesized that a “global savings glut” was causing large trade imbalances. However, we show that the global savings rates did not show a robust upward trend during the relevant period. Moreover, if there had been a global savings glut there should have been a large investment boom in the countries that imported capital. Instead, those countries experienced consumption booms. National asset bubbles explain the international imbalances. The bubbles raised consumption, resulting in large trade deficits. In a sample of 18 OECD countries plus China, movements in home prices alone explain half of the variation in trade deficits. PMID:23750045

Renewable energy recovery through selected industrial wastes

NASA Astrophysics Data System (ADS)

Zhang, Pengchong

Typically, industrial waste treatment costs a large amount of capital, and creates environmental concerns as well. A sound alternative for treating these industrial wastes is anaerobic digestion. This technique reduces environmental pollution, and recovers renewable energy from the organic fraction of those selected industrial wastes, mostly in the form of biogas (methane). By applying anaerobic technique, selected industrial wastes could be converted from cash negative materials into economic energy feed stocks. In this study, three kinds of industrial wastes (paper mill wastes, brown grease, and corn-ethanol thin stillage) were selected, their performance in the anaerobic digestion system was studied and their applicability was investigated as well. A pilot-scale system, including anaerobic section (homogenization, pre-digestion, and anaerobic digestion) and aerobic section (activated sludge) was applied to the selected waste streams. The investigation of selected waste streams was in a gradually progressive order. For paper mill effluents, since those effluents contain a large amount of recalcitrant or toxic compounds, the anaerobic-aerobic system was used to check its treatability, including organic removal efficiency, substrate utilization rate, and methane yield. The results showed the selected effluents were anaerobically treatable. For brown grease, as it is already well known as a treatable substrate, a high rate anaerobic digester were applied to check the economic effect of this substrate, including methane yield and substrate utilization rate. These data from pilot-scale experiment have the potential to be applied to full-scale plant. For thin stillage, anaerobic digestion system has been incorporated to the traditional ethanol making process as a gate-to-gate process. The performance of anaerobic digester was applied to the gate-to-gate life-cycle analysis to estimate the energy saving and industrial cost saving in a typical ethanol plant.

A post-crisis assessment of retirement income adequacy for Baby Boomers and Gen Xers.

PubMed

VanDerhei, Jack

2011-02-01

DETERMINING THOSE "AT RISK" OF INSUFFICIENT RETIREMENT INCOME: The analysis in this paper was designed to answer two questions: 1) What percentage of U.S. households became "at risk" of insufficient retirement income as a result of the financial market and real estate crisis in 2008 and 2009? 2) Of those who are at risk, what additional savings do they need to make each year until retirement age to make up for their losses from the crisis? The results are from the 2010 EBRI Retirement Security Projection Model by the Employee Benefit Research Institute. Range at risk: The percentage of households that would not have been "at risk" without the 2008-2009 crisis but that ended up "at risk" varies from a low of 3.8 percent to a high of 14.3 percent. 50-50 chance of adequacy: Looking at all Early Boomer households that would need to save an additional amount (over and above the savings already factored into the baseline model), the median percentage of additional compensation for these households desiring a 50 percent probability of retirement income adequacy would be 3.0 percent of compensation each year until retirement age to account for the financial and housing market crisis in 2008 and 2009. 90 percent chance of adequacy: Looking at all Early Boomer households that would need to save an additional amount (over and above the savings already factored into the baseline model), the median percentage of additional compensation for these households desiring a 90 percent probability of retirement income adequacy would be 4.3 percent of compensation. Range of adequacy: Looking only at Early Boomer households that would need to save an additional amount (over and above the savings already factored into the baseline model), that had account balances in defined contribution plans and IRAs as well as exposure to the real estate crisis in 2008 and 2009 shows a median percentage for of 5.6 percent for a 50 percent probability and 6.7 percent for a 90 percent probability of retirement income adequacy.

Cloud Computing: A model Construct of Real-Time Monitoring for Big Dataset Analytics Using Apache Spark

NASA Astrophysics Data System (ADS)

Alkasem, Ameen; Liu, Hongwei; Zuo, Decheng; Algarash, Basheer

2018-01-01

The volume of data being collected, analyzed, and stored has exploded in recent years, in particular in relation to the activity on the cloud computing. While large-scale data processing, analysis, storage, and platform model such as cloud computing were previously and currently are increasingly. Today, the major challenge is it address how to monitor and control these massive amounts of data and perform analysis in real-time at scale. The traditional methods and model systems are unable to cope with these quantities of data in real-time. Here we present a new methodology for constructing a model for optimizing the performance of real-time monitoring of big datasets, which includes a machine learning algorithms and Apache Spark Streaming to accomplish fine-grained fault diagnosis and repair of big dataset. As a case study, we use the failure of Virtual Machines (VMs) to start-up. The methodology proposition ensures that the most sensible action is carried out during the procedure of fine-grained monitoring and generates the highest efficacy and cost-saving fault repair through three construction control steps: (I) data collection; (II) analysis engine and (III) decision engine. We found that running this novel methodology can save a considerate amount of time compared to the Hadoop model, without sacrificing the classification accuracy or optimization of performance. The accuracy of the proposed method (92.13%) is an improvement on traditional approaches.

30 CFR 260.102 - What definitions apply to this subpart?

Code of Federal Regulations, 2010 CFR

2010-07-01

... amount or value of the production saved, removed, or sold. Lease period means the time from lease... rate payable to the United States, as specified in the lease, in the amount or value of the production... title.) Production period means the period during which the amount of oil and gas produced from a tract...

Predicting energy savings attributed to daylighting

NASA Astrophysics Data System (ADS)

Robbins, C. L.

1983-11-01

A method for estimating a building's energy savings attributable to daylighting by predicting the percentage of the year that the electric lighting system is not in use is described. This method depends upon the particular control stragegy chosen, a standard work year, and the amount of light (as a daylight factor, DF) reaching any given station in the building.

Applications of data compression techniques in modal analysis for on-orbit system identification

NASA Technical Reports Server (NTRS)

Carlin, Robert A.; Saggio, Frank; Garcia, Ephrahim

1992-01-01

Data compression techniques have been investigated for use with modal analysis applications. A redundancy-reduction algorithm was used to compress frequency response functions (FRFs) in order to reduce the amount of disk space necessary to store the data and/or save time in processing it. Tests were performed for both single- and multiple-degree-of-freedom (SDOF and MDOF, respectively) systems, with varying amounts of noise. Analysis was done on both the compressed and uncompressed FRFs using an SDOF Nyquist curve fit as well as the Eigensystem Realization Algorithm. Significant savings were realized with minimal errors incurred by the compression process.

Deconflicting Wind-Optimal Aircraft Trajectories in North Atlantic Oceanic Airspace

NASA Technical Reports Server (NTRS)

Rodionova, Olga; Delahaye, Daniel; Sridhar, Banavar; Ng, Hok K.

2016-01-01

North Atlantic oceanic airspace accommodates more than 1000 flights daily, and is subjected to very strong winds. Flying wind-optimal trajectories yields time and fuel savings for each individual flight. However, when taken together, these trajectories induce a large amount of potential en-route conflicts. This paper analyses the detected conflicts, figuring out conflict distribution in time and space. It further describes an optimization algorithm aimed at reducing the number of conflicts for a daily set of flights on strategic level. Several trajectory modification strategies are discussed, followed with simulation results. Finally, an algorithm improvement is presented aiming at better preserving the trajectory optimality.

Program Helps Decompose Complex Design Systems

NASA Technical Reports Server (NTRS)

Rogers, James L., Jr.; Hall, Laura E.

1995-01-01

DeMAID (Design Manager's Aid for Intelligent Decomposition) computer program is knowledge-based software system for ordering sequence of modules and identifying possible multilevel structure for design problems such as large platforms in outer space. Groups modular subsystems on basis of interactions among them. Saves considerable amount of money and time in total design process, particularly in new design problem in which order of modules has not been defined. Originally written for design problems, also applicable to problems containing modules (processes) that take inputs and generate outputs. Available in three machine versions: Macintosh written in Symantec's Think C 3.01, Sun, and SGI IRIS in C language.

Poor Families Striving to Save in Matched Children's Savings Accounts: Findings from a Randomized Experimental Design in Uganda.

PubMed

Karimli, Leyla; Ssewamala, Fred M; Neilands, Torsten B

2014-12-01

This study examines participants' savings in children's savings accounts (CSAs) set up for AIDS-orphaned children ages 10-15 in Uganda. Using a cluster randomized experimental design, we examine the extent to which families participating in a CSA program report more savings than their counterparts not participating in the program, explore the extent to which families who participate in the CSA program report using formal financial institutions compared with families who do not have a CSA, and consider whether families participating in the CSA program bring new money into the CSA or whether they reshuffle existing household assets. We find that participating in a CSA increased families' likelihood to report having saved money. However, our results show no intervention effect either on the amount of self-reported savings or on the likelihood of using formal financial institutions. Further research is needed to understand whether use of a CSA helps families generate new wealth.

Poor Families Striving to Save in Matched Children’s Savings Accounts: Findings from a Randomized Experimental Design in Uganda

PubMed Central

Karimli, Leyla; Ssewamala, Fred M.; Neilands, Torsten B.

2014-01-01

This study examines participants’ savings in children’s savings accounts (CSAs) set up for AIDS-orphaned children ages 10–15 in Uganda. Using a cluster randomized experimental design, we examine the extent to which families participating in a CSA program report more savings than their counterparts not participating in the program, explore the extent to which families who participate in the CSA program report using formal financial institutions compared with families who do not have a CSA, and consider whether families participating in the CSA program bring new money into the CSA or whether they reshuffle existing household assets. We find that participating in a CSA increased families’ likelihood to report having saved money. However, our results show no intervention effect either on the amount of self-reported savings or on the likelihood of using formal financial institutions. Further research is needed to understand whether use of a CSA helps families generate new wealth. PMID:25525282

The M77 Highway: saving lives and money.

PubMed

Crane, Evan O T; Augustine, Angelica; Tait, Gavin R

2008-09-01

Upgrading of a stretch of the A77, a major road in South West Scotland to Highway status has resulted in a significant reduction in the incidence of serious and fatal road traffic accidents on a major international route. Notwithstanding the pain and suffering prevented, the annual economic savings amount to over pound 6.1 Million ($12.14 M/euro 7.96 M) The Highway, with an effective central reservation barrier, will pay for itself in 17 years and will continue to prevent serious injury and save lives.

31 CFR 359.46 - What are the denominations and prices of book-entry Series I savings bonds?

Code of Federal Regulations, 2014 CFR

2014-07-01

... 31 Money and Finance: Treasury 2 2014-07-01 2014-07-01 false What are the denominations and prices of book-entry Series I savings bonds? 359.46 Section 359.46 Money and Finance: Treasury Regulations... a minimum amount of $25, with additional increments of one cent. Book-entry bonds are sold at par...

31 CFR 359.46 - What are the denominations and prices of book-entry Series I savings bonds?

Code of Federal Regulations, 2012 CFR

2012-07-01

... 31 Money and Finance:Treasury 2 2012-07-01 2012-07-01 false What are the denominations and prices of book-entry Series I savings bonds? 359.46 Section 359.46 Money and Finance: Treasury Regulations... a minimum amount of $25, with additional increments of one cent. Book-entry bonds are sold at par...

31 CFR 359.46 - What are the denominations and prices of book-entry Series I savings bonds?

Code of Federal Regulations, 2013 CFR

2013-07-01

... 31 Money and Finance:Treasury 2 2013-07-01 2013-07-01 false What are the denominations and prices of book-entry Series I savings bonds? 359.46 Section 359.46 Money and Finance: Treasury Regulations... a minimum amount of $25, with additional increments of one cent. Book-entry bonds are sold at par...

Predicting energy savings attributed to daylighting

NASA Astrophysics Data System (ADS)

Robbins, C. L.

1982-08-01

A method is described for estimating a building's energy savings attributed to daylighting by predicting the percentage of the year that the electric lighting system is not in use. This depends on the particular control strategy chosen, a standard work year, and the amount of light (as a daylight factor) reaching on daylight and sunlight availability for selected cities in the United States.

Alternative Fuels Data Center: Techniques for Drivers to Conserve Fuel

Science.gov Websites

techniques to save fuel and money. The amount of fuel your vehicle consumes depends heavily on how you drive and money. Vehicles use the most energy when accelerating. Using cruise control on the highway can trips can save you time and money by avoiding unnecessary stopping and starting of your vehicle, which

31 CFR 359.55 - How are redemption values calculated for book-entry Series I savings bonds?

Code of Federal Regulations, 2010 CFR

2010-07-01

... prorated to the book-entry par investment amount for the corresponding issue and redemption dates... to $25.04; calculated value of $25.045 rounds to $25.05. [Book-entry par investment ÷ 100] × [CRV... for book-entry Series I savings bonds? 359.55 Section 359.55 Money and Finance: Treasury Regulations...

Food waste disposal units in UK households: the need for policy intervention.

PubMed

Iacovidou, Eleni; Ohandja, Dieudonne-Guy; Voulvoulis, Nikolaos

2012-04-15

The EU Landfill Directive requires Member States to reduce the amount of biodegradable waste disposed of to landfill. This has been a key driver for the establishment of new waste management options, particularly in the UK, which in the past relied heavily on landfill for the disposal of municipal solid waste (MSW). MSW in the UK is managed by Local Authorities, some of which in a less conventional way have been encouraging the installation and use of household food waste disposal units (FWDs) as an option to divert food waste from landfill. This study aimed to evaluate the additional burden to water industry operations in the UK associated with this option, compared with the benefits and related savings from the subsequent reductions in MSW collection and disposal. A simple economic analysis was undertaken for different FWD uptake scenarios, using the Anglian Region as a case study. Results demonstrated that the significant savings from waste collection arising from a large-scale uptake of FWDs would outweigh the costs associated with the impacts to the water industry. However, in the case of a low uptake, such savings would not be enough to cover the increased costs associated with the wastewater provision. As a result, this study highlights the need for policy intervention in terms of regulating the use of FWDs, either promoting them as an alternative to landfill to increase savings from waste management, or banning them as a threat to wastewater operations to reduce potential costs to the water industry. Copyright © 2012 Elsevier B.V. All rights reserved.

Incorporation of catalytic dehydrogenation into fischer-tropsch synthesis to significantly reduce carbon dioxide emissions

DOEpatents

Huffman, Gerald P.

2012-11-13

A new method of producing liquid transportation fuels from coal and other hydrocarbons that significantly reduces carbon dioxide emissions by combining Fischer-Tropsch synthesis with catalytic dehydrogenation is claimed. Catalytic dehydrogenation (CDH) of the gaseous products (C1-C4) of Fischer-Tropsch synthesis (FTS) can produce large quantities of hydrogen while converting the carbon to multi-walled carbon nanotubes (MWCNT). Incorporation of CDH into a FTS-CDH plant converting coal to liquid fuels can eliminate all or most of the CO.sub.2 emissions from the water-gas shift (WGS) reaction that is currently used to elevate the H.sub.2 level of coal-derived syngas for FTS. Additionally, the FTS-CDH process saves large amounts of water used by the WGS reaction and produces a valuable by-product, MWCNT.

National Weatherization Assistance Program Impact Evaluation: Energy Impacts for Large Multifamily Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blasnik, Michael; Dalhoff, Greg; Carroll, David

This report estimates energy savings, energy cost savings, and cost effectiveness attributable to weatherizing large multifamily buildings under the auspices of the Department of Energy's Weatherization Assistance Program during Program Year 2008.

31 CFR 351.45 - What happens if I purchase definitive Series EE savings bonds in excess of the maximum annual...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false What happens if I purchase definitive Series EE savings bonds in excess of the maximum annual amount? 351.45 Section 351.45 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) FISCAL SERVICE, DEPARTMENT OF THE TREASURY...

75 FR 82217 - Community Reinvestment Act Regulations

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-30

...The OCC, the Board, the FDIC, and the OTS (collectively, the ``agencies'') are amending their Community Reinvestment Act (CRA) regulations to adjust the asset-size thresholds used to define ``small bank'' or ``small savings association'' and ``intermediate small bank'' or ``intermediate small savings association.'' As required by the CRA regulations, the adjustment to the threshold amount is based on the annual percentage change in the Consumer Price Index.

76 FR 79529 - Community Reinvestment Act Regulations

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-22

...The OCC, the Board, and the FDIC (collectively, the ``agencies'') are amending their Community Reinvestment Act (CRA) regulations to adjust the asset-size thresholds used to define ``small bank'' or ``small savings association'' and ``intermediate small bank'' or ``intermediate small savings association.'' As required by the CRA regulations, the adjustment to the threshold amount is based on the annual percentage change in the Consumer Price Index.

A Large-Scale Design Integration Approach Developed in Conjunction with the Ares Launch Vehicle Program

NASA Technical Reports Server (NTRS)

Redmon, John W.; Shirley, Michael C.; Kinard, Paul S.

2012-01-01

This paper presents a method for performing large-scale design integration, taking a classical 2D drawing envelope and interface approach and applying it to modern three dimensional computer aided design (3D CAD) systems. Today, the paradigm often used when performing design integration with 3D models involves a digital mockup of an overall vehicle, in the form of a massive, fully detailed, CAD assembly; therefore, adding unnecessary burden and overhead to design and product data management processes. While fully detailed data may yield a broad depth of design detail, pertinent integration features are often obscured under the excessive amounts of information, making them difficult to discern. In contrast, the envelope and interface method results in a reduction in both the amount and complexity of information necessary for design integration while yielding significant savings in time and effort when applied to today's complex design integration projects. This approach, combining classical and modern methods, proved advantageous during the complex design integration activities of the Ares I vehicle. Downstream processes, benefiting from this approach by reducing development and design cycle time, include: Creation of analysis models for the Aerodynamic discipline; Vehicle to ground interface development; Documentation development for the vehicle assembly.

Gender and the Effects of an Economic Empowerment Program on Attitudes Toward Sexual Risk-Taking Among AIDS-Orphaned Adolescent Youth in Uganda

PubMed Central

Ssewamala, Fred; Ismayilova, Leyla; McKay, Mary; Sperber, Elizabeth; Bannon, William; Alicea, Stacey

2009-01-01

Purpose This paper examines gender differences in attitudes towards sexual risk-taking behaviors of AIDS-orphaned youth participating in a randomized control trial testing an economic empowerment intervention in rural Uganda. Methods Adolescents (average age 13.7 years) who had lost one or both parents to AIDS from fifteen comparable schools were randomly assigned to either an experimental (n=135) or control condition (n=142). Adolescents in the experimental condition, in addition to usual care, also received support and incentives to save money toward secondary education. Results Findings indicate that although adolescent boys and girls within the experimental condition saved comparable amounts, the intervention appears to have benefited girls, in regards to the attitudes towards sexual risk-taking behavior, in a different way and to a lesser extent than boys. Conclusions Future research should investigate the possibility that adolescent girls might be able to develop equally large improvements in protective attitudes towards sexual risk-taking through additional components that address gendered social norms. PMID:20307827

Taiwan Ascii and Idl_save Data Archives (AIDA) for THEMIS

NASA Astrophysics Data System (ADS)

Lee, B.; Hsieh, W.; Shue, J.; Angelopoulos, V.; Glassmeier, K. H.; McFadden, J. P.; Larson, D.

2008-12-01

THEMIS (Time History of Events and their Macroscopic Interactions during Substorms) is a satellite mission that aims to determine where and how substorms are triggered. The space research team in Taiwan has been involved in data promotion and scientific research. Taiwan Ascii and Idl_save Data Archives (AIDA) for THEMIS is the main work of the data promotion. Taiwan AIDA is developed for those who are not familiar with the Interactive Data Language (IDL) data analysis and visualization software, and those who have some basic IDL concepts and techniques and want more flexibilities in reading and plotting the THEMIS data. Two kinds of data format are stored in Taiwan AIDA: one is ASCII format for most users and the other is IDL SAVE format for IDL users. The public can download THEMIS data in either format through the Taiwan AIDA web site, http://themis.ss.ncu.edu.tw/e_data_download.php. Taiwan AIDA provides (1) plasma data including number density, average temperature, and velocity of ions and electrons, (2) magnetic field data, and (3) state information including the position and velocity of five THEMIS probes. On the Taiwan AIDA web site there are two data-downloading options. The public can download a large amount of data for a particular instrument in the FTP equivalent option; the public can also download all the data for a particular date in the Data Search option.

Dedicated Orthogeriatric Service Saves the HSE a Million Euro.

PubMed

Shanahan, E; Henderson, C; Butler, A; Lenehan, B; Sheehy, T; Costelloe, A; Carew, S; Peters, C; O'Connor, M; Lyons, D; Ryan, J

2016-04-11

Hip fracture is common in older adults and is associated with high morbidity, mortality and significant health care costs. A pilot orthogeriatrics service was established in an acute hospital. We aimed to establish the cost effectiveness of this service. Length of hospital stay, discharge destination and rehabilitation requirements were analysed for a one year period and compared to patients who received usual care prior to the service. We calculated the costs incurred and savings produced by the orthogeriatric service. Median length of stay was reduced by 3 days (p < 0.001) saving €266,976. There was a 19% reduction in rehabilitation requirements saving €192,600. Median rehabilitation length of stay was reduced by 6.5 days saving €171,093. Reductions in long term care requirements led to savings of €10,934 per week. Costs to establish such a service amount to €171,564. The introduction of this service led to improved patient outcomes in a cost effective manner.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baxter, Van D.; Munk, Jeffrey D.; Gehl, Anthony C.

The field study is planned to continue through the 2016 cooling season with the draft final project report due by September 30, 2016. This report provides a description of both installations and preliminary 2015 cooling and fall season performance results for the Knoxville site. For the August 18 through December 14 period, the Knoxville site GS-IHP provided 53.6% total source energy savings compared to a baseline electric RTU/heat pump and electric WH. Peak demand savings ranged from 33% to 59% per month. Energy cost savings of 53.1% have been achieved to date with more than half of that coming frommore » reduced demand charges. Data on installation and maintenance costs are being collected and will be combined with total test period energy savings data for a payback analysis to be included in the project final report. The GS-IHP also saved a significant amount of carbon emissions. The total emission savings for the Knoxville site for the August-December 2015 period were ~0.8 metric tons. If trading for carbon credits ever becomes a reality, additional cost savings would be realized.« less

Accrued Cost Savings of a Free Clinic Using Quality-Adjusted Life Years Saved and Return on Investment.

PubMed

Sanders, Jim; Lacey, Marcus; Guse, Clare E

2017-01-01

Savings garnered through the provision of preventive services is a form of profit for health systems. Free clinics have been using this logic to demonstrate their cost-savings. The Community-Based Chronic Disease Management (CCDM) clinic treats hypertension using nurse-led teams, clinical protocols, and community-based settings. We calculated CCDM's cost-effectiveness from 2007 to 2013 using 2 metrics: Quality-adjusted life years (QALYs) saved and return on investment (ROI). QALYs were calculated using the Clinical Preventive Burden (CPB) score for hypertension care. ROI was calculated by tallying the savings from prevented heart attacks, strokes, and emergency department visits against the total operating costs. Using conservative assumptions for cost estimates, hypertension care resulted in a value of QALYs saved of $711,000 to $2,133,000 and an ROI ratio range of 0.35 to 1.20. Our study shows that when using conservative assumptions to calculate cost-savings, our free clinic did not save money. Cost-savings did occur, but the amount was modest, was less than that of cost-inputs, and was not likely captured by any single health entity. Although free clinics remain a vital health care access point for many Americans, it has yet to be demonstrated that they generate a net savings. © Copyright 2017 by the American Board of Family Medicine.

Budget impact of secondary hyperparathyroidism treatment in chronic kidney disease in an Ecuadorian social security hospital.

PubMed

Manjarres, Luis; Sanchez, Pilar; Cabezas, María C; Fornasini, Marco; Freire, Valeria; Albert, Adelin

2016-08-26

Chronic kidney disease (CKD) is a disorder with high morbidity and mortality worldwide whose complications generate multiple costs. In Ecuador, only a few healthcare institutions have implemented management protocols aimed to reduce costs and to improve the quality of life of patients. The aim of this study is to evaluate the short-term (1-year) and long-term (5-year) costs and savings in the management of secondary hyperparathyroidism (SHPT) of hemodialyzed CKD patients by comparing calcitriol and paricalcitol in a large social security hospital in Quito, Ecuador. The estimation model assessed the resources used in the management of SHPT by comparing prospectively the cost savings within 1-year and 5-year time horizon with calcitriol and paricalcitol. Hospitalization, erythropoietin (EPO), treatment doses, intravenous iron consumption, and medical supplies were estimated according international references, based on the initial parathormone level (iPTH) of patients. The Ecuadorian National Reference costs (2014-2015) and institutional costs were used to calculate treatment costs. A statistical sensitivity analysis was also performed. The study was based on data from 354 patients of whom 147 (41.4 %) had a value of iPTH in the range 300-600 pg/ml, 45 (12.8 %) in the range 601-800 pg/ml, and 162 (45.7 %) over 800 pg/ml. The 1-year estimated costs per patient for calcitriol and paricalcitol, respectively, were: medication, 63.88 USD and 1,123.44 USD; EPO, 19,522.95 USD and 16,478 USD; intravenous iron 143.21 USD and 187.76 USD. Yearly hospitalization costs per patient were 11,647.99 USD with calcitriol and 8,019.41 USD with paricalcitol. Total yearly costs per patient amounted to 31,378.02 USD with calcitriol and 25,809.50 USD with paricalcitol. Total savings using paricalcitol were 5,568.52 USD per patient compared with calcitriol. The 5-year cumulative medication costs were 319 USD for calcitriol and 2,403 USD for paricalcitol; EPO with calcitriol was 97,615 USD and with paricalcitol 82,394 USD; intravenous iron with calcitriol was 716 USD and paricalcitol 939 USD. Hospitalization costs for patients with calcitriol and paricalcitol were 43,095 USD and 62,595 USD, respectively. Total savings using paricalcitol amounted 32,414 USD per patient compared with calcitriol. Paricalcitol use generated more cost savings than calcitriol after 1 and 5 years.

Microwash or macrowash technique to maintain a clear cornea during cataract surgery.

PubMed

Amjadi, Shahriar; Roufas, Athena; Figueira, Edwin C; Bhardwaj, Gaurav; Francis, Katherine E; Masselos, Katherine; Francis, Ian C

2010-09-01

We describe a technique of irrigating and thereby rapidly and effectively clearing the cornea of relatively large amounts of surface contaminants that reduce surgical visibility and may contribute to endophthalmitis. This technique is referred to as "macrowash." If the technique is required, it is usually at the commencement of cataract surgery, immediately after placement of the surgical drape. The technique not only saves time, but also reduces the volume of irrigating solution required by the "microwash" technique, which is traditionally carried out by the scrub nurse/surgical assistant using a Rycroft cannula attached to a 15 mL container of irrigating solution. Copyright (c) 2010 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.

Food-related energy requirements.

PubMed

Hirst, E

1974-04-12

I have used data from input-output studies to determine the quantities of primary and electric energy consumed in the agricultural, processing, transportation, wholesale and retail trade, and household sectors for personal consumption of food. Before one draws conclusions from these results, it is important to note the assumptions and approximations used in this analysis. First, the economic input-output data published by the Department of Commerce are subject to a number of inaccuracies, including lack of complete coverage for an industry, restriction of data for proprietary reasons, and use of different time periods for different data. Second, aggregation can combine within the same sector industries whose energy intensities differ widely. For example, eating and drinking establishments probably consume more energy per dollar of sales (because of refrigerators, stoves, and freezers) than do department stores. However, both types of establishment are included in retail trade. Thus energy use for food-related retail trade may be underestimated because of aggregation. Third, the energy coefficients are subject to error. In particular, the coefficients for the agricultural and trade sectors are vulnerable because energy use within these sectors is not well documented. Finally, the scaling factor used to estimate food-related energy use for the 1960's is approximate, in that it neglects the possibility that these energy coefficients changed differently with time. Because of these limitations, which are described more fully by Herendeen (6), a number of important issues were not addressed here. such as relative energy requirements for fresh, frozen, and canned vegetables; and for soybeans as compared to beef. This analysis shows that the U.S. food cycle consumes a considerable amount of energy, about 12 percent of the total national energy budget. The residential sector, which accounts for 30 percent of the total, is the most energy-intensive sector in terms of energy consumed per dollar of food-related expenditure. This is because food-related expenditures in homes are primarily for fuel to operate kitchen appliances and automobiles. The electricity consumed in these activities constitutes 22 percent of the total amount used in the United States. More than half of the electricity is used in homes, and more than two-thirds in the trade and household sectors. Thus agriculture and processing consume little electricity relative to the total amount used. From past trends, it appears that the amount of energy used in food-related activities will continue to increase at a rate faster than the population, principally because of growing affluence, that is, the use of processed foods, purchase of meals away from home, and the use of kitchen appliances equipped with energy-intensive devices, such as refrigerators with automatic icemakers. However, fuel shortages, rapidly increasing fuel prices, the growing need to import oil, and a host of other problems related to our use of energy suggest that these past trends will not continue. Fortunately, there are many ways to reduce the amounts of energy used for food-related activities. In the home, for example, smaller refrigerators with thicker insulation would use less electricity than do present units. If closer attention were given to the use of ranges and ovens (for example, if oven doors were not opened so often) energy would be saved. Changes in eating habits could also result in energy savings. Greater reliance on vegetable and grain products, rather than meats, for protein would reduce fuel use. Similarly, a reduction in the amounts of heavily processcd foods consumed-TV dinners and frozen desserts-would save energy. Retailers could save energy by using closed freezers to store food and by reducing the amount of lighting they use. Processors could use heat recovery methods, more efficient processes, and less packaging. Shipping more food by train rather than by truck would also cut energy use. Farmers could reduce their fuel use by combining operations (for example, by harrowing, planting, and fertilizing in the same operation), by reducing tillage practices, by increasing thc use of diesel rather than gasoline engines, and by increasing labor inputs. A partial return to organic farming (that is, greater use of animal manure and crop rotation) would save energy because chemical fertilizers require large energy inputs for their production.

Clean and Green: Saving Water in the Operating Theatre

PubMed Central

Jehle, Karlheinz; Jarrett, Nick; Matthews, Shaun

2008-01-01

INTRODUCTION There is a growing trend to use alcohol-based hand disinfectants in clinical practice. In addition to their antibacterial efficacy, these disinfectants offer an alternative to traditional surgical hand disinfection agents that can save water in the operating theatre. MATERIALS AND METHODS The amounts of water and soap used during traditional surgical hand disinfection with antiseptic soap preparations were measured and water usage over a 1-year period was estimated. Costs of traditional disinfection agents were compared with alcohol-based agents. RESULTS One surgical hand disinfection episode with traditional agents used 18.5 l of water. During 15,500 procedures performed at our institution over a 1-year period, 931,938 l of water were used which could have been saved had alcohol-based agents been used. Cost per episode of hand disinfection depends on the amounts used and is not higher compared to traditional agents. CONCLUSIONS The benefits of using an alcohol-based surgical hand disinfectant may include significant water savings, in addition to previously published advantages of improved efficacy. When deciding on the method of surgical hand disinfection, careful thought should be given to the use of water as a resource. Surgeons should be aware of the environmental impact of their profession. PMID:18201493

Surgical vampires and rising health care expenditure: reducing the cost of daily phlebotomy.

PubMed

Stuebing, Elizabeth A; Miner, Thomas J

2011-05-01

To determine whether simply being made continually aware of the hospital costs of daily phlebotomy would reduce the amount of phlebotomy ordered for nonintensive care unit surgical patients. Prospective observational study. Tertiary care hospital in an urban setting. All nonintensive care unit patients on 3 general surgical services. A weekly announcement to surgical house staff and attending physicians of the dollar amount charged to nonintensive care unit patients for laboratory services during the previous week. Dollars charged per patient per day for routine blood work. At baseline, the charges for daily phlebotomy were $147.73/patient/d. After 11 weeks of residents being made aware of the daily charges for phlebotomy, the charges dropped as low as $108.11/patient/d. This had a correlation coefficient of -0.76 and significance of P = .002. Over 11 weeks of intervention, the dollar amount saved was $54,967. Health care providers being made aware of the cost of phlebotomy can decrease the amount of these tests ordered and result in significant savings for the hospital.

Maximizing Energy Savings Reliability in BC Hydro Industrial Demand-side Management Programs: An Assessment of Performance Incentive Models

NASA Astrophysics Data System (ADS)

Gosman, Nathaniel

For energy utilities faced with expanded jurisdictional energy efficiency requirements and pursuing demand-side management (DSM) incentive programs in the large industrial sector, performance incentive programs can be an effective means to maximize the reliability of planned energy savings. Performance incentive programs balance the objectives of high participation rates with persistent energy savings by: (1) providing financial incentives and resources to minimize constraints to investment in energy efficiency, and (2) requiring that incentive payments be dependent on measured energy savings over time. As BC Hydro increases its DSM initiatives to meet the Clean Energy Act objective to reduce at least 66 per cent of new electricity demand with DSM by 2020, the utility is faced with a higher level of DSM risk, or uncertainties that impact the costeffective acquisition of planned energy savings. For industrial DSM incentive programs, DSM risk can be broken down into project development and project performance risks. Development risk represents the project ramp-up phase and is the risk that planned energy savings do not materialize due to low customer response to program incentives. Performance risk represents the operational phase and is the risk that planned energy savings do not persist over the effective measure life. DSM project development and performance risks are, in turn, a result of industrial economic, technological and organizational conditions, or DSM risk factors. In the BC large industrial sector, and characteristic of large industrial sectors in general, these DSM risk factors include: (1) capital constraints to investment in energy efficiency, (2) commodity price volatility, (3) limited internal staffing resources to deploy towards energy efficiency, (4) variable load, process-based energy saving potential, and (5) a lack of organizational awareness of an operation's energy efficiency over time (energy performance). This research assessed the capacity of alternative performance incentive program models to manage DSM risk in BC. Three performance incentive program models were assessed and compared to BC Hydro's current large industrial DSM incentive program, Power Smart Partners -- Transmission Project Incentives, itself a performance incentive-based program. Together, the selected program models represent a continuum of program design and implementation in terms of the schedule and level of incentives provided, the duration and rigour of measurement and verification (M&V), energy efficiency measures targeted and involvement of the private sector. A multi criteria assessment framework was developed to rank the capacity of each program model to manage BC large industrial DSM risk factors. DSM risk management rankings were then compared to program costeffectiveness, targeted energy savings potential in BC and survey results from BC industrial firms on the program models. The findings indicate that the reliability of DSM energy savings in the BC large industrial sector can be maximized through performance incentive program models that: (1) offer incentives jointly for capital and low-cost operations and maintenance (O&M) measures, (2) allow flexible lead times for project development, (3) utilize rigorous M&V methods capable of measuring variable load, process-based energy savings, (4) use moderate contract lengths that align with effective measure life, and (5) integrate energy management software tools capable of providing energy performance feedback to customers to maximize the persistence of energy savings. While this study focuses exclusively on the BC large industrial sector, the findings of this research have applicability to all energy utilities serving large, energy intensive industrial sectors.

Modeling and assessing field irrigation water use in a canal system of Hetao, upper Yellow River basin: Application to maize, sunflower and watermelon

NASA Astrophysics Data System (ADS)

Ren, Dongyang; Xu, Xu; Hao, Yuanyuan; Huang, Guanhua

2016-01-01

Water saving in irrigation is a key issue in the upper Yellow River basin. Excessive irrigation leads to water waste, water table rising and increased salinity. Land fragmentation associated with a large dispersion of crops adds to the agro-hydrological complexity of the irrigation system. The model HYDRUS-1D, coupled with the FAO-56 dual crop coefficient approach (dualKc), was applied to simulate the water and salt movement processes. Field experiments were conducted for maize, sunflower and watermelon crops in the command area of a typical irrigation canal system in Hetao Irrigation District during 2012 and 2013. The model was calibrated and validated in three crop fields using two-year experimental data. Simulations of soil moisture, salinity concentration and crop yield fitted well with the observations. The irrigation water use was then evaluated and results showed that large amounts of irrigation water percolated due to over-irrigation but their reuse through capillary rise was also quite large. That reuse was facilitated by the dispersion of crops throughout largely fragmented field, thus with fields reusing water percolated from nearby areas due to the rapid lateral migration of groundwater. Beneficial water use could be improved when taking this aspect into account, which was not considered in previous researches. The non-beneficial evaporation and salt accumulation into the root zone were found to significantly increase during non-growth periods due to the shallow water tables. It could be concluded that when applying water saving measures, close attention should be paid to cropping pattern distribution and groundwater control in association with irrigation scheduling and technique improvement.

State Approaches to Demand Reduction Induced Price Effects: Examining How Energy Efficiency Can Lower Prices for All

DOE Office of Scientific and Technical Information (OSTI.GOV)

Taylor, Colin; Hedman, Bruce; Goldberg, Amelie

Effects (DRIPE) as a real, quantifiable benefit of energy efficiency and demand response programs. DRIPE is a measurement of the value of demand reductions in terms of the decrease in wholesale energy prices, resulting in lower total expenditures on electricity or natural gas across a given grid. Crucially for policymakers and consumer advocates, DRIPE savings accrue not only to the subset of customers who consume less, but to all consumers. Rate-paying customers realize DRIPE savings when price reductions across an electricity or natural gas system are passed on to all retail customers as lower rates (depending upon regulation and marketmore » structure, residual savings may be wholly or partially retained by utilities). DRIPE savings, though seemingly small in terms of percent price reductions or dollars per household, can amount to hundreds of millions of dollars per year across entire states or grids. Therefore, accurately assessing DRIPE benefits can help to ensure appropriate programs are designed and implemented for energy efficiency measures. This paper reviews the existing knowledge and experience from select U.S. states regarding DRIPE (including New York and Ohio), and the potential for expanded application of the concept of DRIPE by regulators. Policymakers and public utility commissions have a critical role to play in setting the methodology for determining DRIPE, encouraging its capture by utilities, and allocating DRIPE benefits among utilities, various groups of customers, and/or society at large. While the methodologies for estimating DRIPE benefits are still being perfected, policymakers can follow the examples of states such as Maryland and Vermont in including conservative DRIPE estimates in their resource planning.« less

Performance of a large building rainwater harvesting system.

PubMed

Ward, S; Memon, F A; Butler, D

2012-10-15

Rainwater harvesting is increasingly becoming an integral part of the sustainable water management toolkit. Despite a plethora of studies modelling the feasibility of the utilisation of rainwater harvesting (RWH) systems in particular contexts, there remains a significant gap in knowledge in relation to detailed empirical assessments of performance. Domestic systems have been investigated to a limited degree in the literature, including in the UK, but there are few recent longitudinal studies of larger non-domestic systems. Additionally, there are few studies comparing estimated and actual performance. This paper presents the results of a longitudinal empirical performance assessment of a non-domestic RWH system located in an office building in the UK. Furthermore, it compares actual performance with the estimated performance based on two methods recommended by the British Standards Institute - the Intermediate (simple calculations) and Detailed (simulation-based) Approaches. Results highlight that the average measured water saving efficiency (amount of mains water saved) of the office-based RWH system was 87% across an 8-month period, due to the system being over-sized for the actual occupancy level. Consequently, a similar level of performance could have been achieved using a smaller-sized tank. Estimated cost savings resulted in capital payback periods of 11 and 6 years for the actual over-sized tank and the smaller optimised tank, respectively. However, more detailed cost data on maintenance and operation is required to perform whole life cost analyses. These findings indicate that office-scale RWH systems potentially offer significant water and cost savings. They also emphasise the importance of monitoring data and that a transition to the use of Detailed Approaches (particularly in the UK) is required to (a) minimise over-sizing of storage tanks and (b) build confidence in RWH system performance. Copyright © 2012 Elsevier Ltd. All rights reserved.

A weight based genetic algorithm for selecting views

NASA Astrophysics Data System (ADS)

Talebian, Seyed H.; Kareem, Sameem A.

2013-03-01

Data warehouse is a technology designed for supporting decision making. Data warehouse is made by extracting large amount of data from different operational systems; transforming it to a consistent form and loading it to the central repository. The type of queries in data warehouse environment differs from those in operational systems. In contrast to operational systems, the analytical queries that are issued in data warehouses involve summarization of large volume of data and therefore in normal circumstance take a long time to be answered. On the other hand, the result of these queries must be answered in a short time to enable managers to make decisions as short time as possible. As a result, an essential need in this environment is in improving the performances of queries. One of the most popular methods to do this task is utilizing pre-computed result of queries. In this method, whenever a new query is submitted by the user instead of calculating the query on the fly through a large underlying database, the pre-computed result or views are used to answer the queries. Although, the ideal option would be pre-computing and saving all possible views, but, in practice due to disk space constraint and overhead due to view updates it is not considered as a feasible choice. Therefore, we need to select a subset of possible views to save on disk. The problem of selecting the right subset of views is considered as an important challenge in data warehousing. In this paper we suggest a Weighted Based Genetic Algorithm (WBGA) for solving the view selection problem with two objectives.

Quit for My Finances | Smokefree 60+

Cancer.gov

You can save money by quitting smoking. Why should you quit now? The cost of smoking adds up quickly. If you smoke a pack a day, you're spending at least $43 per week. Use the calculator to find out how much you could save if you quit today. These amounts are based on a 2015 national average price of about $6.25 per pack. Depending on where you live, the cost of cigarettes could be more.

A Study of Organizational Downsizing and Information Management Strategies.

DTIC Science & Technology

1992-09-01

Projected $100,000 at plants. per month savings from using miniframes . Networked Standardized "Best practices." 3 mainframes and applications. Whatever worked...The projected $1.2 million savings realized from going from mainframes to miniframes is to avoid having to reduce the budget by that amount in other...network hardware Turned in mainframe and replaced it with two miniframes ; networked new minis with systems at plants Networked mainframes and PCs Acquired

Don't ban PVC: incinerate and recycle it instead!

PubMed

Menke, Doris; Fiedler, Hiltrud; Zwahr, Heiner

2003-04-01

Plastics are making a growing contribution to sustainable development. For example, over an expected lifetime of 50 years, the use of window frames and insulating materials made of plastic in buildings save many times the energy required to manufacture them. Plastics for packaging purposes provide protection against damage and dirt contamination, thereby saving considerable amounts of material and energy. Choosing appropriate disposal strategies for plastic waste also helps to protect the environment (Mark 2000).

Quit for My Finances | Smokefree 60+

Cancer.gov

You can save money by quitting smoking. Why should you quit now? The cost of smoking adds up quickly. If you smoke a pack a day, you're spending at least $45 per week. Use the calculator to find out how much you could save if you quit today. These amounts are based on a 2018 national average price of about $6.35 per pack. Depending on where you live, the cost of cigarettes could be more.

Green Routing Fuel Saving Opportunity Assessment: A Case Study on California Large-Scale Real-World Travel Data: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhu, Lei; Holden, Jacob; Gonder, Jeff

New technologies, such as connected and automated vehicles, have attracted more and more researchers for improving the energy efficiency and environmental impact of current transportation systems. The green routing strategy instructs a vehicle to select the most fuel-efficient route before the vehicle departs. It benefits the current transportation system with fuel saving opportunity through identifying the greenest route. This paper introduces an evaluation framework for estimating benefits of green routing based on large-scale, real-world travel data. The framework has the capability to quantify fuel savings by estimating the fuel consumption of actual routes and comparing to routes procured by navigationmore » systems. A route-based fuel consumption estimation model, considering road traffic conditions, functional class, and road grade is proposed and used in the framework. An experiment using a large-scale data set from the California Household Travel Survey global positioning system trajectory data base indicates that 31% of actual routes have fuel savings potential with a cumulative estimated fuel savings of 12%.« less

Green Routing Fuel Saving Opportunity Assessment: A Case Study on California Large-Scale Real-World Travel Data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhu, Lei; Holden, Jacob; Gonder, Jeffrey D

New technologies, such as connected and automated vehicles, have attracted more and more researchers for improving the energy efficiency and environmental impact of current transportation systems. The green routing strategy instructs a vehicle to select the most fuel-efficient route before the vehicle departs. It benefits the current transportation system with fuel saving opportunity through identifying the greenest route. This paper introduces an evaluation framework for estimating benefits of green routing based on large-scale, real-world travel data. The framework has the capability to quantify fuel savings by estimating the fuel consumption of actual routes and comparing to routes procured by navigationmore » systems. A route-based fuel consumption estimation model, considering road traffic conditions, functional class, and road grade is proposed and used in the framework. An experiment using a large-scale data set from the California Household Travel Survey global positioning system trajectory data base indicates that 31% of actual routes have fuel savings potential with a cumulative estimated fuel savings of 12%.« less

26 CFR 1.221-1 - Deduction for interest paid on qualified education loans after December 31, 2001.

Code of Federal Regulations, 2010 CFR

2010-04-01

... education loans after December 31, 2001. 1.221-1 Section 1.221-1 Internal Revenue INTERNAL REVENUE SERVICE... otherwise includible amount distributed from a Coverdell education savings account and excluded from gross income under section 530(d)(2); or (G) Any otherwise includible amount distributed from a qualified...

26 CFR 1.221-1 - Deduction for interest paid on qualified education loans after December 31, 2001.

Code of Federal Regulations, 2011 CFR

2011-04-01

... education loans after December 31, 2001. 1.221-1 Section 1.221-1 Internal Revenue INTERNAL REVENUE SERVICE... otherwise includible amount distributed from a Coverdell education savings account and excluded from gross income under section 530(d)(2); or (G) Any otherwise includible amount distributed from a qualified...

12 CFR 572.7 - Forced placement of flood insurance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Forced placement of flood insurance. 572.7... HAVING SPECIAL FLOOD HAZARDS § 572.7 Forced placement of flood insurance. If a savings association, or a... not covered by flood insurance or is covered by flood insurance in an amount less than the amount...

12 CFR 502.10 - How does OTS calculate the semi-annual assessment for savings associations?

Code of Federal Regulations, 2010 CFR

2010-01-01

... §§ 502.15 through 502.25 of this part. (b) OTS uses the September 30 Thrift Financial Report to determine amounts due at the January 31 assessment; and the March 31 Thrift Financial Report to determine amounts... your total assets as reported on Thrift Financial Reports filed with OTS. ...

The Impact of Large, Multi-Function/Multi-Site Competitions

DTIC Science & Technology

2003-08-01

this approach generates larger savings and improved service quality , and is less expensive to implement. Moreover, it is a way to meet the President s...of the study is to assess the degree to which large-scale competitions completed have resulted in increased savings and service quality and decreased

Saving Energy in Industrial Companies: Case Studies of Energy Efficiency Programs in Large U.S. Industrial Corporations and the Role of Ratepayer-Funded Support

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

This paper is designed for companies looking to cut costs through energy savings, ratepayer-funded program administrators interested in increasing large industrial company participation in energy efficiency program offerings, and state utility commissions.

[Implementation of a new electronic patient record in surgery].

PubMed

Eggli, S; Holm, J

2001-12-01

The increasing amount of clinical data, intensified interest of patients in medical information, medical quality management and the recent cost explosion in health care systems have forced medical institutions to improve their strategy in handling medical data. In the orthopedic department (3,600 surgeries, 75 beds, 14,000 consultations) software application for comprehensive patient data management has been developed. When implementing the electronic patient history following criteria were evaluated: 1. software evaluation, 2. implementation, 3. work flow, 4. data security/system stability. In the first phase the functional character was defined. Implementation required 3 months after parametrization. The expense amounted to 130,000 DM (30 clients). The training requirements were one afternoon for the secretaries and a 2-h session for the residents. The access speed on medically relevant data averaged under 3 s. The average saving in working hours was approximately 5 h/week for the secretaries and 4 h/week for the residents. The saving in paper amounted to 36,000 sheets/year. In 3 operational years there were 3 server breakdowns. Evaluation of the saving on working hours showed that such a system can amortize within a year. The latest improvements in hardware and software technology made the electronic medical record with integrated quality-control practicable without massive expenditure. The system supplies an extensive platform of information for patient treatment and an instrument to evaluate the efficiency of therapy strategies independent of the clinical field.

Quantifying Behavior Driven Energy Savings for Hotels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dong, Bing; Wang, Na; Hooks, Edward

2016-08-12

Hotel facilities present abundant opportunities for energy savings. In the United States, there are around 25,000 hotels that spend on an average of $2,196 on energy costs per room each year. This amounts to about 6% of the total annual hotel operating cost. However, unlike offices, there are limited studies on establishing appropriate baselines and quantifying hotel energy savings given the variety of services and amenities, unpredictable customer behaviors, and the around-the-clock operation hours. In this study, we investigate behavior driven energy savings for three medium-size (around 90,000 sf2) hotels that offer similar services in different climate zones. We firstmore » used Department of Energy Asset Scoring Tool to establish baseline models. We then conducted energy saving analysis in EnergyPlus based on a behavior model that defines the upper bound and lower bound of customer and hotel staff behavior. Lastly, we presented a probabilistic energy savings outlook for each hotel. The analysis shows behavior driven energy savings up to 25%. We believe this is the first study to incorporate behavioral factors into energy analysis for hotels. It also demonstrates a procedure to quickly create tailored baselines and identify improvement opportunities for hotels.« less

7 CFR 1944.407 - Limitations.

Code of Federal Regulations, 2011 CFR

2011-01-01

... REGULATIONS (CONTINUED) HOUSING Self-Help Technical Assistance Grants § 1944.407 Limitations. The amount of... typical needed repairs, and the cost savings between self-help and contractor rehabilitation and repair...

Public perceptions of energy consumption and savings

PubMed Central

Attari, Shahzeen Z.; DeKay, Michael L.; Davidson, Cliff I.; Bruine de Bruin, Wändi

2010-01-01

In a national online survey, 505 participants reported their perceptions of energy consumption and savings for a variety of household, transportation, and recycling activities. When asked for the most effective strategy they could implement to conserve energy, most participants mentioned curtailment (e.g., turning off lights, driving less) rather than efficiency improvements (e.g., installing more efficient light bulbs and appliances), in contrast to experts’ recommendations. For a sample of 15 activities, participants underestimated energy use and savings by a factor of 2.8 on average, with small overestimates for low-energy activities and large underestimates for high-energy activities. Additional estimation and ranking tasks also yielded relatively flat functions for perceived energy use and savings. Across several tasks, participants with higher numeracy scores and stronger proenvironmental attitudes had more accurate perceptions. The serious deficiencies highlighted by these results suggest that well-designed efforts to improve the public's understanding of energy use and savings could pay large dividends. PMID:20713724

Use of Occupancy Sensors in LED Parking Lot and Garage Applications: Early Experiences

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kinzey, Bruce R.; Myer, Michael; Royer, Michael P.

2012-11-07

Occupancy sensor systems are gaining traction as an effective technological approach to reducing energy use in exterior commercial lighting applications. Done correctly, occupancy sensors can substantially enhance the savings from an already efficient lighting system. However, this technology is confronted by several potential challenges and pitfalls that can leave a significant amount of the prospective savings on the table. This report describes anecdotal experiences from field installations of occupancy sensor controlled light-emitting diode (LED) lighting at two parking structures and two parking lots. The relative levels of success at these installations reflect a marked range of potential outcomes: from anmore » additional 76% in energy savings to virtually no additional savings. Several issues that influenced savings were encountered in these early stage installations and are detailed in the report. Ultimately, care must be taken in the design, selection, and commissioning of a sensor-controlled lighting installation, else the only guaranteed result may be its cost.« less

Evaluation of Savings in Energy-Efficient Public Housing in the Pacific Northwest

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2013-10-01

This report presents the results of an energy performance and cost-effectiveness analysis. The Salishan phase 7 and demonstration homes were compared to Salishan phase 6 homes built to 2006 Washington State Energy Code specifications 2. Predicted annual energy savings (over Salishan phase 6) was 19% for Salishan phase 7, and between 19-24% for the demonstration homes (depending on ventilation strategy). Approximately two-thirds of the savings are attributable to the DHP. Working with the electric utility provider, Tacoma Public Utilities, researchers conducted a billing analysis for Salishan phase 7. Median energy use for the development is 11,000 kWh; annual energy costsmore » are $780, with a fair amount of variation dependent on size of home. Preliminary analysis of savings between Salishan 7 and previous phases (4 through 6) suggest savings of between 20 and 30 percent. A more comprehensive comparison between Salishan 7 and previous phases will take place in year two of this project.« less

Evaluation of Savings in Energy-Efficient Public Housing in the Pacific Northwest

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gordon, A.; Lubliner, M.; Howard, L.

2013-10-01

This report presents the results of an energy performance and cost-effectiveness analysis. The Salishan phase 7 and demonstration homes were compared to Salishan phase 6 homes built to 2006 Washington State Energy Code specifications 2. Predicted annual energy savings (over Salishan phase 6) was 19% for Salishan phase 7, and between 19-24% for the demonstration homes (depending on ventilationstrategy). Approximately two-thirds of the savings are attributable to the DHP. Working with the electric utility provider, Tacoma Public Utilities, researchers conducted a billing analysis for Salishan phase 7. Median energy use for the development is 11,000 kWh; annual energy costs aremore » $780, with a fair amount of variation dependent on size of home. Preliminary analysis of savings betweenSalishan 7 and previous phases (4 through 6) suggest savings of between 20 and 30 percent. A more comprehensive comparison between Salishan 7 and previous phases will take place in year two of this project.« less

Oilwell Power Controller (OPC)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-08-01

The Oil Well Power Controller (OPC) prototype units is nearing completion. This device is an oilwell beam pump controller and data logger. Applications for this device have been for an electrical power saving device, pump off control, parafffin detection, demand power load control, chemical treatment data, dynamometer and pump efficiency data. Preliminary results appear vary promising. A total of ten OPC rod pump controllers were assembled and installed on oilwells in several areas of Central and Western United States. Data was analyzed on these wells and forwarded to the participating oil companies. Cost savings on each individual oil well participatingmore » in the OPC testing vary considerably, savings on some situations have been outstanding. In situations where the pump efficiency was determined to be low, the cost savings have been considerable. Cost savings due to preventive maintenance are also present, but are difficult to pin point an exact dollar amount at the present time. A break out of actual cost data obtained on some of the oilwells controlled and monitored with the oilwell power controller.« less

Energy Extra: Energy Savings vs. Comfort - and the Effect of Humidity.

ERIC Educational Resources Information Center

CEFP Journal, 1979

1979-01-01

Proper humidity will, in a large number of cases, save money for the user. This saving could show up directly because of reduced infiltration and lower thermostat settings. It could show up indirectly in reduced costs for maintenance and preservation and in increased productivity and decreased absenteeism. (Author)

Conducting polymers: Synthesis and industrial applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gottesfeld, S.

1997-04-01

The Conducting Polymer project funded by the AIM Program has developed new methods for the synthesis of conducting polymers and evaluated new industrial applications for these materials which will result in significant reductions in energy usage or industrial waste. The applications specifically addressed during FY 1996 included two ongoing efforts on membranes for gas separation and on electrochemical capacitors and a third new application: electrochemical reactors (ECRs) based on polymeric electrolytes. As a gas separation membrane, conducting polymers offer high selectivity and the potential to chemically or electrically adapt the membrane for specific gas combinations. Potential energy savings in themore » US for this application are estimated at 1 to 3 quads/yr. As an active material in electrochemical capacitors, electronically conducting polymers have the potential of storing large amounts of electric energy in low cost materials. Potential energy savings estimated at 1 quad/yr would result from introduction of electrochemical capacitors as energy storage devices in power trains of electric and hybrid vehicles, once such vehicles reach 20% of the total transportation market in the US. In the chlor-alkali industry, electrochemical reactors based on polymer electrolyte membranes consume around 1 % of the total electric power in the US. A new activity, started in FY 1996, is devoted to energy efficient ECRs. In the case of the chlor-alkali industry, energy savings as high as 50% seem possible with the novel ECR technology demonstrated by the author in 1996.« less

Potential time savings to radiology department personnel in a PACS-based environment

NASA Astrophysics Data System (ADS)

Saarinen, Allan O.; Wilson, M. C.; Iverson, Scott C.; Loop, John W.

1990-08-01

A purported benefit of digital imaging and archiving of radiographic procedures is the presumption of time savings to radiologists, radiology technologists, and radiology departmentpersonnel involved with processingfilms and managing theflimfile room. As part of the University of Washington's evaluation of Picture Archiving and Communication Systems (PACS)for the U.S. Army Medical Research and Development Command, a study was performed which evaluated the current operationalpractices of the film-based radiology department at the University of Washington Medical Center (UWMC). Industrial engineering time and motion studies were conducted to document the length of time requiredforfilm processing in various modalities, the proportion of the total exam time usedforfilm processing, the amount of time radiologists spent searchingfor and looking at images, and the amount of time file room personnel spent collating reports, making loans, updatingfilm jacket information, and purging files. This evaluation showed that better than one-half of the tasks in the file room may be eliminated with PACS and radiologists may save easily 10 percent of the time they spend reading films by no longer having to searchforfilms. Radiology technologists may also save as much as 10 percent of their time with PACS, although this estimate is subject to significant patient mix aberrations and measurement error. Given that the UWMC radiology department operates efficiently, similar improvements are forecast for other radiology departments and larger improvements areforecastfor less efficient departments.

ResStock Analysis Tool | Buildings | NREL

Science.gov Websites

Energy and Cost Savings for U.S. Homes Contact Eric Wilson to learn how ResStock can benefit your approach to large-scale residential energy analysis by combining: Large public and private data sources uncovered $49 billion in potential annual utility bill savings through cost-effective energy efficiency

A Computationally Efficient Visual Saliency Algorithm Suitable for an Analog CMOS Implementation.

PubMed

D'Angelo, Robert; Wood, Richard; Lowry, Nathan; Freifeld, Geremy; Huang, Haiyao; Salthouse, Christopher D; Hollosi, Brent; Muresan, Matthew; Uy, Wes; Tran, Nhut; Chery, Armand; Poppe, Dorothy C; Sonkusale, Sameer

2018-06-27

Computer vision algorithms are often limited in their application by the large amount of data that must be processed. Mammalian vision systems mitigate this high bandwidth requirement by prioritizing certain regions of the visual field with neural circuits that select the most salient regions. This work introduces a novel and computationally efficient visual saliency algorithm for performing this neuromorphic attention-based data reduction. The proposed algorithm has the added advantage that it is compatible with an analog CMOS design while still achieving comparable performance to existing state-of-the-art saliency algorithms. This compatibility allows for direct integration with the analog-to-digital conversion circuitry present in CMOS image sensors. This integration leads to power savings in the converter by quantizing only the salient pixels. Further system-level power savings are gained by reducing the amount of data that must be transmitted and processed in the digital domain. The analog CMOS compatible formulation relies on a pulse width (i.e., time mode) encoding of the pixel data that is compatible with pulse-mode imagers and slope based converters often used in imager designs. This letter begins by discussing this time-mode encoding for implementing neuromorphic architectures. Next, the proposed algorithm is derived. Hardware-oriented optimizations and modifications to this algorithm are proposed and discussed. Next, a metric for quantifying saliency accuracy is proposed, and simulation results of this metric are presented. Finally, an analog synthesis approach for a time-mode architecture is outlined, and postsynthesis transistor-level simulations that demonstrate functionality of an implementation in a modern CMOS process are discussed.

Steam dispatching control system demonstration at Fort Benjamin Harrison. Final technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Diks, C.L.; Moshage, R.E.; Lin, M.C.

1993-07-01

Currently most Army Central steam heating systems operate by maintaining a constant steam pressure regardless of actual steam demand. This method offers some operational convenience, but is often the cause of significant energy losses. Researchers at the U.S. Army Construction Engineering Research Laboratories (USACERL) have investigated the Steam Dispatching Control System (SDCS), a control system that lowers supply steam pressure-and therefore steam temperature-to slightly above the amount needed to meet the steam demand. The lower Steam temperature and reduction in steam loss (from leaks and faulty traps) result in lower heat losses and higher energy savings. Limiting steam pressure canmore » diminish the amount of excess heat loss in the distribution system while still meeting the demand. The Army's Facilities Engineering Applications Program (FEAP) chose Fort Benjamin Harrison, IN, as the Army demonstration site for SDCS. Researchers found that use of SDCS is technically and economically viable improvement over current operating procedures. Analysis based on demonstration results show that the simple payback for SDCS is less than 1 year. The results of this demonstration are generally applicable to installations with a large central heating plant and a substantial steam distribution system. Findings, indicate that energy savings form SDCS are significant regardless of what type of fuel powers the boiler. The authors note that, during the initial evaluation of a potential SDCS application, attention must be paid to the condensate return to ensure that it will operate properly. Fort Benjamin Harrison, IN, Steam Dispatching Control System(SDCS), Central heating plants, energy conservation.« less

Moonlight project promotes energy-saving technology

NASA Astrophysics Data System (ADS)

Ishihara, A.

1986-01-01

In promoting energy saving, development of energy conservation technologies aimed at raising energy efficiency in the fields of energy conversion, its transportation, its storage, and its consumption is considered, along with enactment of legal actions urging rational use of energies and implementation of an enlightenment campaign for energy conservation to play a crucial role. Under the Moonlight Project, technical development is at present being centered around the following six pillars: (1) large scale energy saving technology; (2) pioneering and fundamental energy saving technology; (3) international cooperative research project; (4) research and survey of energy saving technology; (5) energy saving technology development by private industry; and (6) promotion of energy saving through standardization. Heat pumps, magnetohydrodynamic generators and fuel cells are discussed.

Characteristics of MSW and heat energy recovery between residential and commercial areas in Seoul.

PubMed

Yi, Sora; Yoo, Kee-Young; Hanaki, Keisuke

2011-03-01

This paper analyzes the amount and characteristics of municipal solid waste (MSW) according to the inhabitant density of population and the business concentration in 25 districts in Seoul. Further, the heat energy recovery and avoided CO(2) emissions of four incineration plants located in residential and commercial areas in Seoul are examined. The amount of residential waste per capita tended to increase as the density of inhabitants decreased. The amount of commercial waste per capita tended to increase as the business concentration increased. The examination of the heat energy recovery characteristics indicated that the four incineration plants produced heat energy that depended on residential or commercial areas based on population and business. The most important result regarding avoided CO(2) emissions was that commercial areas with many office-type businesses had the most effective CO(2) emission savings by combusting 1 kg of waste. Assuming the full-scale operation of the four incineration plants, the amount of saved CO(2) emissions per year was 444 Gg CO(2) and 57,006 households in Seoul can be provided with heat energy equivalent to 542,711 Nm(3) of LNG. Copyright © 2010 Elsevier Ltd. All rights reserved.

Electrically switchable polymer stabilised broadband infrared reflectors and their potential as smart windows for energy saving in buildings.

PubMed

Khandelwal, Hitesh; Loonen, Roel C G M; Hensen, Jan L M; Debije, Michael G; Schenning, Albertus P H J

2015-07-01

Electrically switchable broadband infrared reflectors that are relatively transparent in the visible region have been fabricated using polymer stabilised cholesteric liquid crystals. The IR reflectors can change their reflection/transmission properties by applying a voltage in response to changes in environmental conditions. Simulations predict that a significant amount of energy can be saved on heating, cooling and lighting of buildings in places such as Madrid by using this switchable IR reflector. We have also fabricated a switchable IR reflector which can also generate electricity. These polymer based switchable IR reflectors are of high potential as windows of automobiles and buildings to control interior temperatures and save energy.

Electrically switchable polymer stabilised broadband infrared reflectors and their potential as smart windows for energy saving in buildings

PubMed Central

Khandelwal, Hitesh; Loonen, Roel C. G. M.; Hensen, Jan L. M.; Debije, Michael G.; Schenning, Albertus P. H. J.

2015-01-01

Electrically switchable broadband infrared reflectors that are relatively transparent in the visible region have been fabricated using polymer stabilised cholesteric liquid crystals. The IR reflectors can change their reflection/transmission properties by applying a voltage in response to changes in environmental conditions. Simulations predict that a significant amount of energy can be saved on heating, cooling and lighting of buildings in places such as Madrid by using this switchable IR reflector. We have also fabricated a switchable IR reflector which can also generate electricity. These polymer based switchable IR reflectors are of high potential as windows of automobiles and buildings to control interior temperatures and save energy. PMID:26132328

Energy savings potential in air conditioners and chiller systems

DOE PAGES

Kaya, Durmus; Alidrisi, Hisham

2014-01-22

In the current paper we quantified and evaluated the energy saving potential in air conditioners and chiller systems. Here, we also showed how to reduce the cost of air conditioners and chiller systems in existing facilities on the basis of payback periods. Among the measures investigated were: (1) installing higher efficiency air conditioners, (2) installing higher efficiency chillers, (3) duty cycling air conditioning units, and (4) utilizing existing economizers on air conditioning units. For each method, examples were provided from Arizona, USA. In these examples, the amount of saved energy, the financial evaluation of this energy, and the investment costmore » and pay back periods were calculated.« less

Cost effectiveness of a screen-and-treat program for asymptomatic vaginal infections in pregnancy: towards a significant reduction in the costs of prematurity.

PubMed

Kiss, H; Pichler, Eva; Petricevic, L; Husslein, P

2006-08-01

The purpose of this investigation was to determine the cost-saving potential of a simple screen-and-treat program for vaginal infection, which has previously been shown to lead to a reduction of 50% in the rate of preterm births. To determine the potential cost savings, we compared the direct costs of preterm delivery of infants with a birth weight below 1900g with the costs of the screen-and-treat program. We used a cut-off birth weight of 1900g because, in our population, all infants with a birth weight below 1900g were transferred to the neonatal intensive care unit. The direct costs associated with preterm delivery were defined to include the costs of the initial hospitalization of both mother and infant and the costs of outpatient follow-up throughout the first 6 years of life of the former preterm infant. The costs of the screen-and-treat program were defined to include the costs of the screening examination and the resulting costs of antimicrobial treatment and follow-up. All calculations were based on health-economic data obtained in the metropolitan area of Vienna, Austria. The number of preterm infants with a birth weight below 1900g was 12 (0.5%) in the intervention group (N=2058) and 29 (1.3%) in the control group (N=2097). The direct costs per preterm birth were found to amount to EUR (euro) 60262. Overall, the expected total savings in direct costs achieved by the screen-and-treat program and the ensuing 50% reduction in the number preterm births with a birth weight below 1900g amounted to more than euro 11 million. The costs of screening and treatment were found to amount to merely 7% of the direct costs saved as a result of the screen-and-treat program. A simple preterm prevention program, consisting of screening and antimicrobial treatment and follow-up of women with asymptomatic vaginal infection, leads not only to a significant reduction in the rate of preterm births but also to substantial savings in the direct costs associated with prematurity.

Energy and Cost Savings of Retro-Commissioning and Retrofit Measures for Large Office Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Weimin; Zhang, Jian; Moser, Dave

2012-08-03

This paper evaluates the energy and cost savings of seven retro-commissioning measures and 29 retrofit measures applicable to most large office buildings. The baseline model is for a hypothetical building with characteristics of large office buildings constructed before 1980. Each retro-commissioning measure is evaluated against the original baseline in terms of its potential of energy and cost savings while each retrofit measure is evaluated against the commissioned building. All measures are evaluated in five locations (Miami, Las Vegas, Seattle, Chicago and Duluth) to understand the impact of weather conditions on energy and cost savings. The results show that implementation ofmore » the seven operation and maintenance measures as part of a retro-commissioning process can yield an average of about 22% of energy use reduction and 14% of energy cost reduction. Widening zone temperature deadband, lowering VAV terminal minimum air flow set points and lighting upgrades are effective retrofit measures to be considered.« less

Medical savings accounts make waves.

PubMed

Gardner, J

1995-02-27

MSAs: the theory. Medical savings account legislation would allow consumers to set aside pre-tax dollars to pay for day-to-day healthcare costs. The accounts are to be backed up by a catastropic policy with a deductible roughly equal to the maximum amount allowed in the MSA. The aim is to reduce healthcare cost inflation by making consumers more aware of the costs of healthcare than they are under comprehensive policies and enabling them to shop for the lowest-cost, highest-quality care.

Efficient transformer study: Analysis of manufacture and utility data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burkes, Klaehn; Cordaro, Joe; McIntosh, John

Distribution transformers convert power from the distribution system voltage to the end-customer voltage, which consists of residences, businesses, distributed generation, campus systems, and manufacturing facilities. Amorphous metal distribution transformers (AMDT) are also more expensive and heavier than conventional silicon steel distribution transformers. This and the difficulty to measure the benefit from energy efficiency and low awareness of the technology have hindered the adoption of AMDT. This report presents the cost savings for installing AMDT and the amount of energy saved based on the improved efficiency.

Program Helps Decompose Complicated Design Problems

NASA Technical Reports Server (NTRS)

Rogers, James L., Jr.

1993-01-01

Time saved by intelligent decomposition into smaller, interrelated problems. DeMAID is knowledge-based software system for ordering sequence of modules and identifying possible multilevel structure for design problem. Displays modules in N x N matrix format. Requires investment of time to generate and refine list of modules for input, it saves considerable amount of money and time in total design process, particularly new design problems in which ordering of modules has not been defined. Program also implemented to examine assembly-line process or ordering of tasks and milestones.

Budgetary and Economic Outcomes Under Paths for Federal Revenues and Noninterest Spending Specified in the Conference Report on the 2016 Budget Resolution

DTIC Science & Technology

2015-04-01

excluding interest savings and macroeconomic effects, would be roughly $5 trillion lower than in CBO’s current-law baseline, as adjusted to...and spending—and the resulting amount of federal borrow- ing—under those paths would affect the economy and how those macroeconomic effects (or...baseline projections. With interest savings included and the resulting macroeconomic effects incorpo- rated, the cumulative deficit over the 2016–2025

Clustering methods for the optimization of atomic cluster structure

NASA Astrophysics Data System (ADS)

Bagattini, Francesco; Schoen, Fabio; Tigli, Luca

2018-04-01

In this paper, we propose a revised global optimization method and apply it to large scale cluster conformation problems. In the 1990s, the so-called clustering methods were considered among the most efficient general purpose global optimization techniques; however, their usage has quickly declined in recent years, mainly due to the inherent difficulties of clustering approaches in large dimensional spaces. Inspired from the machine learning literature, we redesigned clustering methods in order to deal with molecular structures in a reduced feature space. Our aim is to show that by suitably choosing a good set of geometrical features coupled with a very efficient descent method, an effective optimization tool is obtained which is capable of finding, with a very high success rate, all known putative optima for medium size clusters without any prior information, both for Lennard-Jones and Morse potentials. The main result is that, beyond being a reliable approach, the proposed method, based on the idea of starting a computationally expensive deep local search only when it seems worth doing so, is capable of saving a huge amount of searches with respect to an analogous algorithm which does not employ a clustering phase. In this paper, we are not claiming the superiority of the proposed method compared to specific, refined, state-of-the-art procedures, but rather indicating a quite straightforward way to save local searches by means of a clustering scheme working in a reduced variable space, which might prove useful when included in many modern methods.

Gradient boosting machine for modeling the energy consumption of commercial buildings

DOE PAGES

Touzani, Samir; Granderson, Jessica; Fernandes, Samuel

2017-11-26

Accurate savings estimations are important to promote energy efficiency projects and demonstrate their cost-effectiveness. The increasing presence of advanced metering infrastructure (AMI) in commercial buildings has resulted in a rising availability of high frequency interval data. These data can be used for a variety of energy efficiency applications such as demand response, fault detection and diagnosis, and heating, ventilation, and air conditioning (HVAC) optimization. This large amount of data has also opened the door to the use of advanced statistical learning models, which hold promise for providing accurate building baseline energy consumption predictions, and thus accurate saving estimations. The gradientmore » boosting machine is a powerful machine learning algorithm that is gaining considerable traction in a wide range of data driven applications, such as ecology, computer vision, and biology. In the present work an energy consumption baseline modeling method based on a gradient boosting machine was proposed. To assess the performance of this method, a recently published testing procedure was used on a large dataset of 410 commercial buildings. The model training periods were varied and several prediction accuracy metrics were used to evaluate the model's performance. The results show that using the gradient boosting machine model improved the R-squared prediction accuracy and the CV(RMSE) in more than 80 percent of the cases, when compared to an industry best practice model that is based on piecewise linear regression, and to a random forest algorithm.« less

Gradient boosting machine for modeling the energy consumption of commercial buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Touzani, Samir; Granderson, Jessica; Fernandes, Samuel

Accurate savings estimations are important to promote energy efficiency projects and demonstrate their cost-effectiveness. The increasing presence of advanced metering infrastructure (AMI) in commercial buildings has resulted in a rising availability of high frequency interval data. These data can be used for a variety of energy efficiency applications such as demand response, fault detection and diagnosis, and heating, ventilation, and air conditioning (HVAC) optimization. This large amount of data has also opened the door to the use of advanced statistical learning models, which hold promise for providing accurate building baseline energy consumption predictions, and thus accurate saving estimations. The gradientmore » boosting machine is a powerful machine learning algorithm that is gaining considerable traction in a wide range of data driven applications, such as ecology, computer vision, and biology. In the present work an energy consumption baseline modeling method based on a gradient boosting machine was proposed. To assess the performance of this method, a recently published testing procedure was used on a large dataset of 410 commercial buildings. The model training periods were varied and several prediction accuracy metrics were used to evaluate the model's performance. The results show that using the gradient boosting machine model improved the R-squared prediction accuracy and the CV(RMSE) in more than 80 percent of the cases, when compared to an industry best practice model that is based on piecewise linear regression, and to a random forest algorithm.« less

Optimisation of solar synoptic observations

NASA Astrophysics Data System (ADS)

Klvaña, Miroslav; Sobotka, Michal; Švanda, Michal

2012-09-01

The development of instrumental and computer technologies is connected with steadily increasing needs for archiving of large data volumes. The current trend to meet this requirement includes the data compression and growth of storage capacities. This approach, however, has technical and practical limits. A further reduction of the archived data volume can be achieved by means of an optimisation of the archiving that consists in data selection without losing the useful information. We describe a method of optimised archiving of solar images, based on the selection of images that contain a new information. The new information content is evaluated by means of the analysis of changes detected in the images. We present characteristics of different kinds of image changes and divide them into fictitious changes with a disturbing effect and real changes that provide a new information. In block diagrams describing the selection and archiving, we demonstrate the influence of clouds, the recording of images during an active event on the Sun, including a period before the event onset, and the archiving of long-term history of solar activity. The described optimisation technique is not suitable for helioseismology, because it does not conserve the uniform time step in the archived sequence and removes the information about solar oscillations. In case of long-term synoptic observations, the optimised archiving can save a large amount of storage capacities. The actual capacity saving will depend on the setting of the change-detection sensitivity and on the capability to exclude the fictitious changes.

Energy Saving Melting and Revert Reduction Technology (Energy SMARRT): Development of CCT Diagrams

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chumbley, L Scott

2011-08-20

One of the most energy intensive industries in the U.S. today is in the melting and casting of steel alloys for use in our advanced technological society. While the majority of steel castings involve low or mild carbon steel for common construction materials, highly-alloyed steels constitute a critical component of many industries due to their excellent properties. However, as the amount of alloying additions increases, the problems associated with casting these materials also increases, resulting in a large waste of energy due to inefficiency and a lack of basic information concerning these often complicated alloy systems. Superaustenitic stainless steels constitutemore » a group of Fe-based alloys that are compositionally balanced to have a purely austenitic matrix and exhibit favorable pitting and crevice corrosion resistant properties and mechanical strength. However, intermetallic precipitates such as sigma (³) and Laves can form during casting or exposure to high-temperature processing, which degrade the corrosion and mechanical properties of the material. Knowledge of the times and temperatures at which these detrimental phases form is imperative if a company is to efficiently produce castings of high quality in the minimum amount of time, using the lowest amount of energy possible, while producing the least amount of material waste. Anecdotal evidence from company representatives revealed that large castings frequently had to be scrapped due to either lower than expected corrosion resistance or extremely low fracture toughness. It was suspected that these poor corrosion and / or mechanical properties were directly related to the type, amount, and location of various intermetallic phases that formed during either the cooling cycle of the castings or subsequent heat treatments. However, no reliable data existed concerning either the time-temperature-transformation (TTT) diagrams or the continuous-cooling-transformation (CCT) diagrams of the super-austenitics. The goal of this study was to accurately characterize the solid-solid phase transformations seen in cast superaustenitic stainless steels. Heat treatments were performed to understand the time and temperature ranges for intermetallic phase formations in alloys CN3MN and CK3McuN. Microstructures were characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy and wavelength dispersive spectroscopy (EDS, WDS). In this way TTT and CCT diagrams could be developed for the matrix of samples chosen. As this study consisted of basic research into the development of TTT and CCT diagrams as an aid to the US steel casting industry, there is no formal commercialization plan associated with this task other than presentations and publications via the Steel Founders Society of America to their members. The author is confident that the data contained in this report can be used by steel foundries to refine their casting procedures in such a way as to reduce the amount of waste produced and energy wasted by significantly reducing or eliminating the need for remelting or recasting of material due to unwanted, premature intermetallic formation. This development of high alloy steel CCT diagrams was predicted to result in an average energy savings of 0.05 trillion BTU's/year over a 10 year period (with full funding). With 65% of the proposed funding, current (2011) annual energy saving estimates, based on initial dissemination to the casting industry in 2011and market penetration of 97% by 2020, is 0.14 trillion BTU's/year. The reduction of scrap and improvement in casting yield will also result in a reduction of environmental emissions associated with the melting and pouring of the steel. The average annual estimate of CO2 reduction per year through 2020 is 0.003 Million Metric Tons of Carbon Equivalent (MM TCE)« less

Saving Watts of Energy

ERIC Educational Resources Information Center

Raloff, Janet

1978-01-01

Presented are different research program developments aimed at reducing the consumption of electrical energy for artificial lights. Explains the idea of the dimmers, where the amount of incoming daylight regulates the current needed for the lamp. (GA)

Costs and benefits of bicycling investments in Portland, Oregon.

PubMed

Gotschi, Thomas

2011-01-01

Promoting bicycling has great potential to increase overall physical activity; however, significant uncertainty exists with regard to the amount and effectiveness of investment needed for infrastructure. The objective of this study is to assess how costs of Portland's past and planned investments in bicycling relate to health and other benefits. Costs of investment plans are compared with 2 types of monetized health benefits, health care cost savings and value of statistical life savings. Levels of bicycling are estimated using past trends, future mode share goals, and a traffic demand model. By 2040, investments in the range of $138 to $605 million will result in health care cost savings of $388 to $594 million, fuel savings of $143 to $218 million, and savings in value of statistical lives of $7 to $12 billion. The benefit-cost ratios for health care and fuel savings are between 3.8 and 1.2 to 1, and an order of magnitude larger when value of statistical lives is used. This first of its kind cost-benefit analysis of investments in bicycling in a US city shows that such efforts are cost-effective, even when only a limited selection of benefits is considered.

Technical Support Document: Development of the Advanced Energy Design Guide for Large Hospitals - 50% Energy Savings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bonnema, E.; Leach, M.; Pless, S.

2013-06-01

This Technical Support Document describes the process and methodology for the development of the Advanced Energy Design Guide for Large Hospitals: Achieving 50% Energy Savings Toward a Net Zero Energy Building (AEDG-LH) ASHRAE et al. (2011b). The AEDG-LH is intended to provide recommendations for achieving 50% whole-building energy savings in large hospitals over levels achieved by following Standard 90.1-2004. The AEDG-LH was created for a 'standard' mid- to large-size hospital, typically at least 100,000 ft2, but the strategies apply to all sizes and classifications of new construction hospital buildings. Its primary focus is new construction, but recommendations may be applicablemore » to facilities undergoing total renovation, and in part to many other hospital renovation, addition, remodeling, and modernization projects (including changes to one or more systems in existing buildings).« less

Chapter 3: Commercial and Industrial Lighting Controls Evaluation Protocol. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurnik, Charles W.; Carlson, Stephen

This Commercial and Industrial Lighting Controls Evaluation Protocol (the protocol) describes methods to account for energy savings resulting from programmatic installation of lighting control equipment in large populations of commercial, industrial, government, institutional, and other nonresidential facilities. This protocol does not address savings resulting from changes in codes and standards, or from education and training activities. When lighting controls are installed in conjunction with a lighting retrofit project, the lighting control savings must be calculated parametrically with the lighting retrofit project so savings are not double counted.

Application of food industry waste to agricultural soils mitigates green house gas emissions.

PubMed

Rashid, M T; Voroney, R P; Khalid, M

2010-01-01

Application of organic waste materials such as food processing and serving industry cooking oil waste (OFW) can recycle soil nitrate nitrogen (NO(3)-N), which is otherwise prone to leaching after the harvest of crop. Nitrogen (N) recycling will not only reduce the amount of N fertilizer application for corn crop production but is also expected to mitigate green house gas (GHG) emissions by saving energy to be used for the production of the same amount of industrial fertilizer N required for the growth of corn crop. Application of OFW at 10Mg solid ha(-1)y(-1) conserved 68 kg N ha(-1)y(-1) which ultimately saved 134 L diesel ha(-1)y(-1), which would otherwise be used for the production of fertilizer N as urea. Average fossil energy substitution value (FESV) of N conserved/recycled was calculated to be 93 US$ ha(-1)y(-1), which is about 13 million US$y(-1). Potential amount of GHG mitigation through the application of OFW to agricultural soils in Canada is estimated to be 57 Gg CO(2)Eq y(-1).

Willingness to pay per quality-adjusted life year for life-saving treatments in Thailand

PubMed Central

Nimdet, Khachapon; Ngorsuraches, Surachat

2015-01-01

Objective To estimate the willingness to pay (WTP) per quality-adjusted life year (QALY) value for life-saving treatments and to determine factors affecting the WTP per QALY value. Design A cross-sectional survey with multistage sampling and face-to-face interviews. Setting General population in the southern part of Thailand. Participants A total of 600 individuals were included in the study. Only 554 (92.3%) responses were usable for data analyses. Outcome measure Participants were asked for the maximum amount of WTP value for life-saving treatments by an open-ended question. EQ-5D-3L and visual analogue scale (VAS) were used to estimate additional QALY. Results The amount of WTP values varied from 0 to 720 000 Baht/year (approximately 32 Baht=US$1). The averages of additional QALY obtained from VAS and EQ-5D-3L were only slightly different (0.872 and 0.853, respectively). The averages of WTP per QALY obtained from VAS and EQ-5D-3L were 244720 and 243120 Baht/QALY, respectively. As compared to male participants, female participants were more likely to pay less for an additional QALY (p=0.007). In addition, participants with higher household incomes tended to have higher WTP per QALY values (p<0.001). Conclusions Our study added another WTP per QALY value specifically for life-saving treatments, which would complement the current cost-effectiveness threshold used in Thailand and optimise patient access to innovative treatments or technologies. PMID:26438135

A probabilistic and adaptive approach to modeling performance of pavement infrastructure

DOT National Transportation Integrated Search

2007-08-01

Accurate prediction of pavement performance is critical to pavement management agencies. Reliable and accurate predictions of pavement infrastructure performance can save significant amounts of money for pavement infrastructure management agencies th...

40 CFR 79.8 - Penalties.

Code of Federal Regulations, 2010 CFR

2010-07-01

... shall be liable to the United States for a civil penalty of not more than the sum of $25,000 for every day of such violation and the amount of economic benefit or savings resulting from the violation...

24 CFR 241.540 - Method of loan payment and amortization period.

Code of Federal Regulations, 2011 CFR

2011-04-01

...-Supplemental Loans To Finance Purchase and Installation of Energy Conserving Improvements, Solar Energy Systems.... No energy saving loan shall have an amortization period in excess of 15 years unless the amount of...

24 CFR 241.540 - Method of loan payment and amortization period.

Code of Federal Regulations, 2010 CFR

2010-04-01

...-Supplemental Loans To Finance Purchase and Installation of Energy Conserving Improvements, Solar Energy Systems.... No energy saving loan shall have an amortization period in excess of 15 years unless the amount of...

24 CFR 241.540 - Method of loan payment and amortization period.

Code of Federal Regulations, 2014 CFR

2014-04-01

...-Supplemental Loans To Finance Purchase and Installation of Energy Conserving Improvements, Solar Energy Systems.... No energy saving loan shall have an amortization period in excess of 15 years unless the amount of...

24 CFR 241.540 - Method of loan payment and amortization period.

Code of Federal Regulations, 2012 CFR

2012-04-01

...-Supplemental Loans To Finance Purchase and Installation of Energy Conserving Improvements, Solar Energy Systems.... No energy saving loan shall have an amortization period in excess of 15 years unless the amount of...

24 CFR 241.540 - Method of loan payment and amortization period.

Code of Federal Regulations, 2013 CFR

2013-04-01

...-Supplemental Loans To Finance Purchase and Installation of Energy Conserving Improvements, Solar Energy Systems.... No energy saving loan shall have an amortization period in excess of 15 years unless the amount of...

Standardization and program effect analysis (Study 2.4). Volume 2: Equipment commonality analysis. [cost savings of using flight-proven components in designing spacecraft

NASA Technical Reports Server (NTRS)

Shiokari, T.

1975-01-01

The feasibility and cost savings of using flight-proven components in designing spacecraft were investigated. The components analyzed were (1) large space telescope, (2) stratospheric aerosol and gas equipment, (3) mapping mission, (4) solar maximum mission, and (5) Tiros-N. It is concluded that flight-proven hardware can be used with not-too-extensive modification, and significant savings can be realized. The cost savings for each component are presented.

ReSeqTools: an integrated toolkit for large-scale next-generation sequencing based resequencing analysis.

PubMed

He, W; Zhao, S; Liu, X; Dong, S; Lv, J; Liu, D; Wang, J; Meng, Z

2013-12-04

Large-scale next-generation sequencing (NGS)-based resequencing detects sequence variations, constructs evolutionary histories, and identifies phenotype-related genotypes. However, NGS-based resequencing studies generate extraordinarily large amounts of data, making computations difficult. Effective use and analysis of these data for NGS-based resequencing studies remains a difficult task for individual researchers. Here, we introduce ReSeqTools, a full-featured toolkit for NGS (Illumina sequencing)-based resequencing analysis, which processes raw data, interprets mapping results, and identifies and annotates sequence variations. ReSeqTools provides abundant scalable functions for routine resequencing analysis in different modules to facilitate customization of the analysis pipeline. ReSeqTools is designed to use compressed data files as input or output to save storage space and facilitates faster and more computationally efficient large-scale resequencing studies in a user-friendly manner. It offers abundant practical functions and generates useful statistics during the analysis pipeline, which significantly simplifies resequencing analysis. Its integrated algorithms and abundant sub-functions provide a solid foundation for special demands in resequencing projects. Users can combine these functions to construct their own pipelines for other purposes.

Development of Improved Burnable Poisons for Commercial Nuclear Power Reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Renier, J.A.

2002-04-17

Burnable poisons are used in all modern nuclear reactors to permit higher loading of fuel without the necessity of an overly large control rod system. This not only permits a longer core life but can also be used to level the power distribution. Commercial nuclear reactors commonly use B{sub 4}C in separate non-fueled rods and more recently, zirconium boride coatings on the fuel pellets or gadolinium oxide mixed with the fuel. Although the advantages are great, there are problems with using these materials. Boron, which is an effective neutron absorber, transmutes to lithium and helium upon absorption of a neutron.more » Helium is insoluble and is eventually released to the interior of the fuel rod, where it produces an internal pressure. When sufficiently high, this pressure stress could cause separation of the cladding from the fuel, causing overly high centerline temperatures. Gadolinium has several very strongly absorbing isotopes, but not all have large cross sections and result in residual burnable poison reactivity worth at the end of the fuel life. Even if the amount of this residual absorber is small and the penalty in operation small, the cost of this penalty, even if only several days, can be very high. The objective of this investigation was to study the performance of single isotopes in order to reduce the residual negative reactivity left over at the end of the fuel cycle. Since the behavior of burnable poisons can be strongly influenced by their configuration, four forms for the absorbers were studied: homogeneously mixed with the fuel, mixed with only the outer one-third of the fuel pellet, coated on the perimeter of the fuel pellets, and alloyed with the cladding. In addition, the numbers of fuel rods containing burnable poison were chosen as 8, 16, 64, and 104. Other configurations were chosen for a few special cases. An enrichment of 4.5 wt% {sup 235}U was chosen for most cases for study in order to achieve a 4-year fuel cycle. A standard pressurized water reactor fuel core was chosen for the study, and state-of-the-art neutronic reactor core computer codes were used for analysis. Power distribution, fuel burnup, reactivity due to burnable poisons and other fission products, spectrum shift, core reactivity, moderator void coefficients, as well as other parameters were calculated as a function of time and fuel burnup. The results not only showed advantages of separation of burnable poison isotopes but revealed benefits to be achieved by careful selection of the configuration of even naturally occurring elements used as burnable poisons. The savings in terms of additional days of operation is shown in Figure 1, where the savings is plotted for each of six favorable isotopes in the four configurations. The benefit of isotope separation is most dramatic for dysprosium, but even the time savings in the case of gadolinium is several days. For a modern nuclear plant, one day's worth of electricity is worth about one million dollars, so the resulting savings of only a few days is considerable. It is also apparent that the amount of savings depends upon the configuration of the burnable poison.« less

Savings needed to fund health insurance and health care expenses in retirement: findings from a simulation model.

PubMed

Fronstin, Paul; Salisbury, Dallas; VanDerhei, Jack

2008-05-01

MODELING RETIREE HEALTH COSTS: This Issue Brief examines the uncertainty of health care expenses in retirement by using a Monte Carlo simulation model to estimate the amount of savings needed to cover health insurance premiums and out-of-pocket health care expenses. This type of simulation is able to account for the uncertainty related to individual mortality and rates of return, and computes the present value of the savings needed to cover health insurance premiums and out-of-pocket expenses in retirement. These observations were used to determine asset targets for having adequate savings to cover retiree health costs 50, 75, and 90 percent of the time. NOT ENOUGH SAVINGS: Many individuals will need more money than the amounts reported in this Issue Brief because this analysis does not factor in the savings needed to cover long-term care expenses, nor does it take into account the fact that many individuals retire prior to becoming eligible for Medicare. However, some workers will need to save less than what is reported if they keep working in retirement and receive health benefits as active workers. WHO HAS RETIREE HEALTH BENEFITS BEYOND MEDICARE?: About 12 percent of private-sector employers report offering any Medicare supplemental health insurance. This increases to about 40 percent among large employers. Overall, nearly 22 percent of retirees age 65 and older had retiree health benefits in 2005 to supplement Medicare coverage. As recently as 2006, 53 percent of retirees age 65 and older were covered by Medicare Part D, 24 percent had outpatient prescription drug coverage through an employment-based plan. Only 10 percent had no prescription drug coverage. INDIVIDUALLY PURCHASED MEDICARE SUPPLEMENTS, 2008: Among those who purchase Medigap and Medicare Part D prescription drug coverage at age 65 in 2008, men would need between $79,000 and $159,000 with median prescription drug expenses (50th percentile and 90th percentiles, respectively), and between $156,000 and $331,000 with prescription spending that is at the 90th percentile. Women would need between $108,000 and $184,000 with median prescription drug expenses (50th and 90th percentiles, respectively), and between $217,000 and $390,000 with prescription spending that is at the 90th percentile. The savings needed for couples would range from $194,000 at the 50th percentile to $635,000 at the 90th percentile. EMPLOYMENT-BASED BENEFITS, 2008: Among those who have employment-based retiree health benefits to supplement Medicare, but who must pay their own premiums, men would need between $102,000 and $196,000 in current savings (50th and 90th percentiles, respectively) to cover health care costs in retirement. Women would need between $137,000 and $224,000, respectively, due to their greater longevity. The savings needed for couples would range from $154,000 to $376,000. INDIVIDUALLY PURCHASED MEDICARE SUPPLEMENTS, 2018: Among those who purchase Medigap and Medicare Part D prescription drug coverage at age 65 in 2018 (currently age 55), men would need between $132,000 and $266,000 with median prescription drug expenses (50th and 90th percentiles, respectively), and between $261,000 and $555,000 with prescription spending that is at the 90th percentile. Women would need between $181,000 and S308,000 with median prescription drug expenses (50th and 90th percentiles), and between S364,000 and $654,000 with prescription spending that is at the 90th percentile. The savings needed for couples would range from $325,000 at the 50th percentile to S1,064,000 at the 90th percentile. RETIREE HEALTH MAY BE DRIVING LONGER TIME IN THE WORK FORCE: The declining availability of retiree health benefits may partly explain the rising labor force participation rate among individuals ages 55-64. Between 1996 and 2006, the labor force participation rate increased from 67 percent to 69.6 percent for men and from 49.6 percent to 58.2 percent for women.

Research on memory management in embedded systems

NASA Astrophysics Data System (ADS)

Huang, Xian-ying; Yang, Wu

2005-12-01

Memory is a scarce resource in embedded system due to cost and size. Thus, applications in embedded systems cannot use memory randomly, such as in desktop applications. However, data and code must be stored into memory for running. The purpose of this paper is to save memory in developing embedded applications and guarantee running under limited memory conditions. Embedded systems often have small memory and are required to run a long time. Thus, a purpose of this study is to construct an allocator that can allocate memory effectively and bear a long-time running situation, reduce memory fragmentation and memory exhaustion. Memory fragmentation and exhaustion are related to the algorithm memory allocated. Static memory allocation cannot produce fragmentation. In this paper it is attempted to find an effective allocation algorithm dynamically, which can reduce memory fragmentation. Data is the critical part that ensures an application can run regularly, which takes up a large amount of memory. The amount of data that can be stored in the same size of memory is relevant with the selected data structure. Skills for designing application data in mobile phone are explained and discussed also.

Failure to protect: why the individual insurance market is not a viable option for most U.S. families: findings from the Commonwealth Fund Biennial Health Insurance Survey, 2007.

PubMed

Doty, Michelle M; Collins, Sara R; Nicholson, Jennifer L; Rustgi, Sheila D

2009-07-01

Between 2001 and 2007, an increasing share of adults with private insurance--whether employer-based coverage or individual market plans--spent a large amount of their income on premiums and out-of-pocket medical costs, were underinsured, and/or avoided needed health care because of costs. Those with coverage obtained in the individual market were the most affected. Over the last three years, nearly three-quarters of people who tried to buy coverage in this market never actually purchased a plan, either because they could not find one that fit their needs or that they could afford, or because they were turned down due to a preexisting condition. Even people enrolled in employer-based plans are spending larger amounts of their income on health care and curtailing their use of needed services to save money. The findings underscore the need for an expansion of affordable health insurance options, particularly during a time of mounting job losses.

Applying science and mathematics to big data for smarter buildings.

PubMed

Lee, Young M; An, Lianjun; Liu, Fei; Horesh, Raya; Chae, Young Tae; Zhang, Rui

2013-08-01

Many buildings are now collecting a large amount of data on operations, energy consumption, and activities through systems such as a building management system (BMS), sensors, and meters (e.g., submeters and smart meters). However, the majority of data are not utilized and are thrown away. Science and mathematics can play an important role in utilizing these big data and accurately assessing how energy is consumed in buildings and what can be done to save energy, make buildings energy efficient, and reduce greenhouse gas (GHG) emissions. This paper discusses an analytical tool that has been developed to assist building owners, facility managers, operators, and tenants of buildings in assessing, benchmarking, diagnosing, tracking, forecasting, and simulating energy consumption in building portfolios. © 2013 New York Academy of Sciences.

Core-Shell Columns in High-Performance Liquid Chromatography: Food Analysis Applications

PubMed Central

Preti, Raffaella

2016-01-01

The increased separation efficiency provided by the new technology of column packed with core-shell particles in high-performance liquid chromatography (HPLC) has resulted in their widespread diffusion in several analytical fields: from pharmaceutical, biological, environmental, and toxicological. The present paper presents their most recent applications in food analysis. Their use has proved to be particularly advantageous for the determination of compounds at trace levels or when a large amount of samples must be analyzed fast using reliable and solvent-saving apparatus. The literature hereby described shows how the outstanding performances provided by core-shell particles column on a traditional HPLC instruments are comparable to those obtained with a costly UHPLC instrumentation, making this novel column a promising key tool in food analysis. PMID:27143972

The Electric Speaking Practice: A Telephone Workload Study

PubMed Central

Westbury, R. C.

1974-01-01

The telephone workload in a family practice was studied for two recording periods separated by a 12 month interval. A record was kept of the number of calls, their length, the day of the week on which they were made, to whom they were made, and for what purpose. The telephone practice accounts for about 20 percent of the total practice workload. Calls to the patients and to their representatives were about equally common and account for most of the workload, but a large amount of telephone work is devoted to ‘backing up’ these direct contacts. The use of the telephone for medical purposes saves much time for the patients and much money for the paying agency. A plea is made for intensive study of this aspect of family medicine. PMID:20469032

Modeling potential effects of reduced calories in kids' meals with toy giveaways.

PubMed

Freij, Maysoun Y; Sell, Randall L; Bozack, Anne K; Weiss, Linda J; Garcia, Ana C

2014-02-01

Given the large proportion of daily calories attributable to fast food, there is growing interest in considering whether ordinances that restrict calories in kids' meals with toy giveaways could avert weight gain among children. Based upon a literature review and stakeholder feedback, a model was developed to estimate the potential number of children that could be affected by a statewide toy giveaway ordinance and the caloric savings should such a policy effectively reduce the number of calories in kids' meals with toy giveaways. Assumptions included the estimated number of children that eat fast food each day, the proportion that choose a kids' meal with a toy, the caloric savings of a kids' meal that meets nutrition standards, and the degree to which these savings could result in weight gain averted per child per year. Using New York as a case study, the model estimates that, on a typical day, 5% (163,571) of children 0-12 years of age in New York could be affected by a toy ordinance. A child who typically consumes fast food two times per week could avoid gaining approximately 2 pounds per year with an ordinance requiring kids' meals to be ≤550 calories. The amount of weight gain averted would vary according to the calorie limit set by the law and the frequency of consumption per week. Our model indicates that a reduction in calories in kids' meals with toy giveaways has the potential to positively affect weight gain in a considerable percentage of children. Limitations of the model are considered.

Energy savings opportunity survey at Walter Reed Army Medical Center, Washington, DC. Final Submittal report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1987-10-22

This Energy Savings Opportunity Survey (ESOS) was performed for sixteen (16) buildings at Walter Reed Army Medical Center (WPAMC) in Washington, D.C. This survey was intended to reevaluate and update projects from a previous Energy Engineering Analysis Program (EEAP) survey performed at WRAMC. However, the previous EEAP survey was determined by the contracting officer to be incomplete and not worthy of further consideration. Therefore, this survey involved the complete reevaluation of the buildings to determine their potential energy cost savings. Six (6) projects and nine (9) low cost/no cost energy conservation opportunities (ECO`s) are recommended for implementation in the buildings.more » These projects and ECO`s are projected to annually save $448,263 at an implementation cost of $891,659. The simple payback (i.e., implementation cost divided by cost savings) for the recommendations in the survey is 1.99 years. The two (2) projects with the greatest cost savings are a stack heat recovery system (Project Number 5) and HVAC modifications (Project Number 1). These two (2) projects will provide 67% of the projected total savings for the survey. The sixteen (16) buildings in this survey represent only 22% of the total floor area of the Walter Reed Army Medical Center complex. It is believed that significant potential energy cost savings amounting to two (2) million dollars may be achieved in the remaining buildings in the complex not included in this survey. Specifically it is believed the main hospital building contains many opportunities for substantial cost savings.« less

Productivity Savings from Colorectal Cancer Prevention and Control Strategies

PubMed Central

Bradley, Cathy J.; Lansdorp-Vogelaar, Iris; Yabroff, K. Robin; Dahman, Bassam; Mariotto, Angela; Feuer, Eric J.; Brown, Martin L.

2011-01-01

Background Lost productivity represents a considerable portion of the total economic burden of colorectal cancer (CRC), but cost-effectiveness studies of CRC prevention and control have not included these costs and therefore underestimate potential savings from CRC prevention and control. Purpose To use microsimulation modeling study to estimate and project productivity costs of CRC and to model the savings from four approaches to reducing CRC incidence and mortality: risk factor reduction, improved screening, improved treatment, and a simultaneous approach where all three strategies are implemented. Methods A model was developed to project productivity losses from CRC using the U.S. population with CRC incidence and mortality projected through the year 2020. Outcome measures were CRC mortality, morbidity, and productivity savings. Results With 2005 levels in risk factors, screening, and treatment, 48,748 CRC deaths occurred in 2010, amounting to $21 billion of lost productivity. Using prevention and treatment strategies simultaneously, 3586 deaths could have been avoided in 2010, leading to a savings of $1.4 billion. Cumulatively, by 2020, simultaneous strategies that reduce risk factors and increase screening and treatment could result in 101,353 deaths avoided and $33.9 billion in savings in reduced productivity loss. Improved screening rates alone led to nearly $14.7 billion in savings between 2005 and 2020, followed by risk factor reduction ($12.4 billion) and improved treatment ($8.4 billion). Conclusions The savings in productivity loss from strategies to reduce CRC incidence and mortality are substantial, providing evidence that CRC prevention and control strategies are likely to be cost-saving. PMID:21767717

Productivity savings from colorectal cancer prevention and control strategies.

PubMed

Bradley, Cathy J; Lansdorp-Vogelaar, Iris; Yabroff, K Robin; Dahman, Bassam; Mariotto, Angela; Feuer, Eric J; Brown, Martin L

2011-08-01

Lost productivity represents a considerable portion of the total economic burden of colorectal cancer (CRC), but cost-effectiveness studies of CRC prevention and control have not included these costs and therefore underestimate potential savings from CRC prevention and control. To use microsimulation modeling study to estimate and project productivity costs of CRC and to model the savings from four approaches to reducing CRC incidence and mortality: risk factor reduction, improved screening, improved treatment, and a simultaneous approach where all three strategies are implemented. A model was developed to project productivity losses from CRC using the U.S. population with CRC incidence and mortality projected through the year 2020. Outcome measures were CRC mortality, morbidity, and productivity savings. With 2005 levels in risk factors, screening, and treatment, 48,748 CRC deaths occurred in 2010, amounting to $21 billion of lost productivity. Using prevention and treatment strategies simultaneously, 3586 deaths could have been avoided in 2010, leading to a savings of $1.4 billion. Cumulatively, by 2020, simultaneous strategies that reduce risk factors and increase screening and treatment could result in 101,353 deaths avoided and $33.9 billion in savings in reduced productivity loss. Improved screening rates alone led to nearly $14.7 billion in savings between 2005 and 2020, followed by risk factor reduction ($12.4 billion) and improved treatment ($8.4 billion). The savings in productivity loss from strategies to reduce CRC incidence and mortality are substantial, providing evidence that CRC prevention and control strategies are likely to be cost-saving. Copyright © 2011 American Journal of Preventive Medicine. All rights reserved.

Performance analysis of male handball goalkeepers at the World Handball championship 2015

PubMed Central

Hansen, Clint; Sanz-Lopez, Fernando; Whiteley, Rodney; Popovic, Nebojsa; Ahmed, Hosny Abdelrahman

2017-01-01

Goalkeepers have a very important role in handball. In coaching communities it is well recognized that goalkeepers’ performances can predict team ranking in major tournaments. Despite this, few studies have been conducted on elite goalkeepers participating in World Championships. Therefore, the purpose of this study was to analyse goalkeepers’ save performance during the 88 matches of the 2015 men’s World Championships tournament. Goalkeepers from 24 national teams were analysed using a tracking camera system and bespoke software (Prozone Handball V.1.2, Prozone, Leeds, UK). The purpose of this study was to examine time-motion performance parameters and to evaluate the save rates for each goalkeeper. The mean total distance covered in a game by the goalkeepers was 1634±999 m. Goalkeepers spent most of the time walking or standing. The total amount of shots to the goal was 6893, with a mean save percentage of 30% (2088 saves). A significant relationship was identified between the goalkeepers’ save statistics and the final team rankings. The save rate is important for teams to achieve a higher ranking, and therefore the selection and training of goalkeepers requires more than just assessing physical abilities. The throwing distribution and success/save rate during the Qatar 2015 Men Handball World Championships suggest strong and weak parts of the goal area, and coaches can use this information to adjust their training approaches for both goalkeepers and shooters. PMID:29472743

Performance analysis of male handball goalkeepers at the World Handball championship 2015.

PubMed

Hansen, Clint; Sanz-Lopez, Fernando; Whiteley, Rodney; Popovic, Nebojsa; Ahmed, Hosny Abdelrahman; Cardinale, Marco

2017-12-01

Goalkeepers have a very important role in handball. In coaching communities it is well recognized that goalkeepers' performances can predict team ranking in major tournaments. Despite this, few studies have been conducted on elite goalkeepers participating in World Championships. Therefore, the purpose of this study was to analyse goalkeepers' save performance during the 88 matches of the 2015 men's World Championships tournament. Goalkeepers from 24 national teams were analysed using a tracking camera system and bespoke software (Prozone Handball V.1.2, Prozone, Leeds, UK). The purpose of this study was to examine time-motion performance parameters and to evaluate the save rates for each goalkeeper. The mean total distance covered in a game by the goalkeepers was 1634±999 m. Goalkeepers spent most of the time walking or standing. The total amount of shots to the goal was 6893, with a mean save percentage of 30% (2088 saves). A significant relationship was identified between the goalkeepers' save statistics and the final team rankings. The save rate is important for teams to achieve a higher ranking, and therefore the selection and training of goalkeepers requires more than just assessing physical abilities. The throwing distribution and success/save rate during the Qatar 2015 Men Handball World Championships suggest strong and weak parts of the goal area, and coaches can use this information to adjust their training approaches for both goalkeepers and shooters.

The cost-effectiveness of life-saving interventions in Japan. Do chemical regulations cost too much?

PubMed

Kishimoto, Atsuo; Oka, Tosihiro; Nakanishi, Junko

2003-10-01

This paper compares the cost-effectiveness of life-saving interventions in Japan, based on information collected from the health, safety and environmental literature. More than 50 life-saving interventions are analyzed. Cost-effectiveness is defined as the cost per life-year saved or as the cost per quality-adjusted life-year saved. Finding a large cost-effectiveness disparity between chemical controls and health care intervention, we raise the question of whether chemical regulations cost society too much. We point out the limitations of this study and propose a way to improve the incorporation of morbidity effects in cost-effectiveness analysis.

Reducing CO2 emissions and energy consumption of heat-integrated distillation systems.

PubMed

Gadalla, Mamdouh A; Olujic, Zarko; Jansens, Peter J; Jobson, Megan; Smith, Robin

2005-09-01

Distillation systems are energy and power intensive processes and contribute significantly to the greenhouse gases emissions (e.g. carbon dioxide). Reducing CO2 emissions is an absolute necessity and expensive challenge to the chemical process industries in orderto meetthe environmental targets as agreed in the Kyoto Protocol. A simple model for the calculation of CO2 emissions from heat-integrated distillation systems is introduced, considering typical process industry utility devices such as boilers, furnaces, and turbines. Furnaces and turbines consume large quantities of fuels to provide electricity and process heats. As a result, they produce considerable amounts of CO2 gas to the atmosphere. Boilers are necessary to supply steam for heating purposes; besides, they are also significant emissions contributors. The model is used in an optimization-based approach to optimize the process conditions of an existing crude oil atmospheric tower in order to reduce its CO2 emissions and energy demands. It is also applied to generate design options to reduce the emissions from a novel internally heat-integrated distillation column (HIDiC). A gas turbine can be integrated with these distillation systems for larger emissions reduction and further energy savings. Results show that existing crude oil installations can save up to 21% in energy and 22% in emissions, when the process conditions are optimized. Additionally, by integrating a gas turbine, the total emissions can be reduced further by 48%. Internal heat-integrated columns can be a good alternative to conventional heat pump and other energy intensive close boiling mixtures separations. Energy savings can reach up to 100% with respect to reboiler heat requirements. Emissions of these configurations are cut down by up to 83%, compared to conventional units, and by 36%, with respect to heat pump alternatives. Importantly, cost savings and more profit are gained in parallel to emissions minimization.

Designing a low-cost pollution prevention plan to pay off at the University of Houston.

PubMed

Bialowas, Yurika Diaz; Sullivan, Emmett C; Schneller, Robert D

2006-09-01

The University of Houston is located just south of downtown Houston, TX. Many different chemical substances are used in scientific research and teaching activities throughout the campus. These activities generate a significant amount of waste materials that must be discarded as regulated hazardous waste per U.S. Environmental Protection Agency (EPA) rules. The Texas Commission on Environmental Quality (TCEQ) is the state regulatory agency that has enforcement authority for EPA hazardous waste rules in Texas. Currently, the University is classified as a large quantity generator and generates >1000 kg per month of hazardous waste. In addition, the University has experienced a major surge in research activities during the past several years, and overall the quantity of the hazardous waste generated has increased. The TCEQ requires large quantity generators to prepare a 5-yr Pollution Prevention (P2) Plan, which describes efforts to eliminate or minimize the amount of hazardous waste generated. This paper addresses the design and development of a low-cost P2 plan with minimal implementation obstacles and strong payoff potentials for the University. The projects identified can be implemented with existing University staff resources. This benefits the University by enhancing its environmental compliance efforts, and the disposal cost savings can be used for other purposes. Other educational institutions may benefit by undertaking a similar process.

An expert system for diagnosing environmentally induced spacecraft anomalies

NASA Technical Reports Server (NTRS)

Rolincik, Mark; Lauriente, Michael; Koons, Harry C.; Gorney, David

1992-01-01

A new rule-based, machine independent analytical tool was designed for diagnosing spacecraft anomalies using an expert system. Expert systems provide an effective method for saving knowledge, allow computers to sift through large amounts of data pinpointing significant parts, and most importantly, use heuristics in addition to algorithms, which allow approximate reasoning and inference and the ability to attack problems not rigidly defined. The knowledge base consists of over two-hundred (200) rules and provides links to historical and environmental databases. The environmental causes considered are bulk charging, single event upsets (SEU), surface charging, and total radiation dose. The system's driver translates forward chaining rules into a backward chaining sequence, prompting the user for information pertinent to the causes considered. The use of heuristics frees the user from searching through large amounts of irrelevant information and allows the user to input partial information (varying degrees of confidence in an answer) or 'unknown' to any question. The modularity of the expert system allows for easy updates and modifications. It not only provides scientists with needed risk analysis and confidence not found in algorithmic programs, but is also an effective learning tool, and the window implementation makes it very easy to use. The system currently runs on a Micro VAX II at Goddard Space Flight Center (GSFC). The inference engine used is NASA's C Language Integrated Production System (CLIPS).

EPA Science Matters Newsletter: EPA Recovery Champions Help Effort to Save Threatened Owl (Published January 2014)

EPA Pesticide Factsheets

Learn abut HexSim, a program developed by the EPA, that incorporates vast amounts of available data about dwindling wildlife species, such as spotted owls, to create scenarios involving virtual populations

Detecting driver fatigue through the use of advanced face monitoring techniques

DOT National Transportation Integrated Search

2001-09-01

Driver fatigue is an important factor in many vehicular accidents.Reducing the number of fatigue-related accidents would save : society a significant amount financially,in addition to reducing personal suffering.The researchers developed a driver fat...

5 CFR 1690.14 - Checks made payable to the Thrift Savings Plan.

Code of Federal Regulations, 2010 CFR

2010-01-01

... and satisfaction. The TSP does not agree to accept less than the total amount due by negotiating an... full” or “submitted in full satisfaction of claims”), or by negotiating an instrument that is...

Behavioral economics perspectives on public sector pension plans.

PubMed

Beshears, John; Choi, James J; Laibson, David; Madrian, Brigitte C

2011-04-01

We describe the pension plan features of the states and the largest cities and counties in the U.S. Unlike in the private sector, defined benefit (DB) pensions are still the norm in the public sector. However, a few jurisdictions have shifted toward defined contribution (DC) plans as their primary savings plan, and fiscal pressures are likely to generate more movement in this direction. Holding fixed a public employee's work and salary history, we show that DB retirement income replacement ratios vary greatly across jurisdictions. This creates large variation in workers' need to save for retirement in other accounts. There is also substantial heterogeneity across jurisdictions in the savings generated in primary DC plans because of differences in the level of mandatory employer and employee contributions. One notable difference between public and private sector DC plans is that public sector primary DC plans are characterized by required employee or employer contributions (or both), whereas private sector plans largely feature voluntary employee contributions that are supplemented by an employer match. We conclude by applying lessons from savings behavior in private sector savings plans to the design of public sector plans.

SBIR Phase II Final Report - Multi-Protocol Energy Management Gateway for Home-Area Networks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hanna, Jason

Significant amounts of electricity, natural gas, and heating oil are wasted by homeowners due to inefficient operation and inadequate maintenance of heating, ventilation, and air conditioning (HVAC) equipment. Coincident’s work under this award reduces energy waste, saves consumers money, and reduces carbon emissions. It does so in three ways: First, Coincident’s approach replaces the traditional thermostat with a wireless network of sensors and controllers that measure temperature, humidity and occupancy in multiple rooms in the house. The “Internet of Things” is a technology trend holding the promise of ubiquitous inexpensive sensors. The reality, however, is that energy and HVAC monitoringmore » and management is a patchwork of incompatible protocols and expensive proprietary technologies. Coincident’s multi-protocol architecture, developed in part under this award tackles this problem and brings low cost interoperable sensor and control devices to market. Second, the Coincident system eliminates hard-to-program and rigid thermostat schedules and instead provides automatic operation of heating and cooling by combining individual temperature and comfort preferences with energy-saving targets, real-time utility use information, weather data, and room utilization patterns. Energy efficiency technology must be appealing to consumers otherwise it will not be used. The Coincident user interface has engaging features such as remote control from any smart phone or web browser and per-room performance breakdowns. Expected energy savings resulting from more efficient operation of heating and air conditioning equipment are in the range of 10-20%. Third, the Coincident system provides heating and air-conditioning contractors with fine-grained performance data for every residence they support (subject to customer privacy controls). This data is integrated from diverse networks within the residence and includes HVAC performance and fuel use data. This information allows the partner to validate energy savings and identify potential system faults (whether from installation problems or maintenance issues). When combined with professional installation as part of high-efficiency HVAC upgrade, energy savings levels of 20-30% can be achieved. Economic feasibility of energy efficiency technology is one of the key challenges addressed in this award. The Coincident system is engineered to be delivered at a disruptive price point, making the system financially feasible for new and retrofit homes of all types and sizes. The Coincident system is intended to be sold through the HVAC professional—the industry most capable of improving HVAC efficiency. Providing HVAC contractors with detailed home performance data motivates them to sell the product, provides them with maintenance and upgrade revenue opportunities, and therefore delivers customer savings and environmental benefits. Having demonstrated technical and financial feasibility, Coincident has won additional grants and awards, participated in pilot projects, started partnership discussions with several HVAC equipment vendors, and has lined up several large channel partners ready to participate in large pilot rollouts.« less

The usage of waste heat recovery units with improved heat engineering rates: theory and experimental research

NASA Astrophysics Data System (ADS)

Chebotarev, Victor; Koroleva, Alla; Pirozhnikova, Anastasia

2017-10-01

Use of recuperator in heat producing plants for utilization of natural gas combustion products allows to achieve the saving of gas fuel and also provides for environmental sanitation. Decrease of the volumes of natural gas combustion due to utilization of heat provides not only for reduction of harmful agents in the combustion products discharged into the atmosphere, but also creates conditions for increase of energy saving in heating processes of heat producing plants due to air overheating in the recuperator. Grapho-analytical method of determination of energy saving and reduction of discharges of combustion products into the atmosphere is represented in the article. Multifunctional diagram is developed, allowing to determine simultaneously savings from reduction of volumes of natural gas combusted and from reduction of amounts of harmful agents in the combustion products discharged into the atmosphere. Calculation of natural gas economy for heat producing plant taking into consideration certain capacity is carried out.

31 CFR 363.99 - What is the minimum amount of a bond that I may transfer or deliver as a gift in any one...

Code of Federal Regulations, 2010 CFR

2010-07-01

... Savings Bonds Purchased Through TreasuryDirect Gifts § 363.99 What is the minimum amount of a bond that I may transfer or deliver as a gift in any one transaction? You may transfer or deliver gift bonds in... that I may transfer or deliver as a gift in any one transaction? 363.99 Section 363.99 Money and...

A regression-based approach to estimating retrofit savings using the Building Performance Database

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walter, Travis; Sohn, Michael D.

Retrofitting building systems is known to provide cost-effective energy savings. This article addresses how the Building Performance Database is used to help identify potential savings. Currently, prioritizing retrofits and computing their expected energy savings and cost/benefits can be a complicated, costly, and an uncertain effort. Prioritizing retrofits for a portfolio of buildings can be even more difficult if the owner must determine different investment strategies for each of the buildings. Meanwhile, we are seeing greater availability of data on building energy use, characteristics, and equipment. These data provide opportunities for the development of algorithms that link building characteristics and retrofitsmore » empirically. In this paper we explore the potential of using such data for predicting the expected energy savings from equipment retrofits for a large number of buildings. We show that building data with statistical algorithms can provide savings estimates when detailed energy audits and physics-based simulations are not cost- or time-feasible. We develop a multivariate linear regression model with numerical predictors (e.g., operating hours, occupant density) and categorical indicator variables (e.g., climate zone, heating system type) to predict energy use intensity. The model quantifies the contribution of building characteristics and systems to energy use, and we use it to infer the expected savings when modifying particular equipment. We verify the model using residual analysis and cross-validation. We demonstrate the retrofit analysis by providing a probabilistic estimate of energy savings for several hypothetical building retrofits. We discuss the ways understanding the risk associated with retrofit investments can inform decision making. The contributions of this work are the development of a statistical model for estimating energy savings, its application to a large empirical building dataset, and a discussion of its use in informing building retrofit decisions.« less

Diffusion Dynamics of Energy Saving Practices in Large Heterogeneous Online Networks

PubMed Central

Mohammadi, Neda; Wang, Qi; Taylor, John E.

2016-01-01

Online social networks are today’s fastest growing communications channel and a popular source of information for many, so understanding their contribution to building awareness and shaping public perceptions of climate change is of utmost importance. Today’s online social networks are composed of complex combinations of entities and communication channels and it is not clear which communicators are the most influential, what the patterns of communication flow are, or even whether the widely accepted two-step flow of communication model applies in this new arena. This study examines the diffusion of energy saving practices in a large online social network across organizations, opinion leaders, and the public by tracking 108,771 communications on energy saving practices among 1,084 communicators, then analyzing the flow of information and influence over a 28 day period. Our findings suggest that diffusion networks of messages advocating energy saving practices are predominantly led by the activities of dedicated organizations but their attempts do not result in substantial public awareness, as most of these communications are effectively trapped in organizational loops in which messages are simply shared between organizations. Despite their comparably significant influential values, opinion leaders played a weak role in diffusing energy saving practices to a wider audience. Thus, the two-step flow of communication model does not appear to describe the sharing of energy conservation practices in large online heterogeneous networks. These results shed new light on the underlying mechanisms driving the diffusion of important societal issues such as energy efficiency, particularly in the context of large online social media outlets. PMID:27736912

Diffusion Dynamics of Energy Saving Practices in Large Heterogeneous Online Networks.

PubMed

Mohammadi, Neda; Wang, Qi; Taylor, John E

2016-01-01

Online social networks are today's fastest growing communications channel and a popular source of information for many, so understanding their contribution to building awareness and shaping public perceptions of climate change is of utmost importance. Today's online social networks are composed of complex combinations of entities and communication channels and it is not clear which communicators are the most influential, what the patterns of communication flow are, or even whether the widely accepted two-step flow of communication model applies in this new arena. This study examines the diffusion of energy saving practices in a large online social network across organizations, opinion leaders, and the public by tracking 108,771 communications on energy saving practices among 1,084 communicators, then analyzing the flow of information and influence over a 28 day period. Our findings suggest that diffusion networks of messages advocating energy saving practices are predominantly led by the activities of dedicated organizations but their attempts do not result in substantial public awareness, as most of these communications are effectively trapped in organizational loops in which messages are simply shared between organizations. Despite their comparably significant influential values, opinion leaders played a weak role in diffusing energy saving practices to a wider audience. Thus, the two-step flow of communication model does not appear to describe the sharing of energy conservation practices in large online heterogeneous networks. These results shed new light on the underlying mechanisms driving the diffusion of important societal issues such as energy efficiency, particularly in the context of large online social media outlets.

Dexterity: A MATLAB-based analysis software suite for processing and visualizing data from tasks that measure arm or forelimb function.

PubMed

Butensky, Samuel D; Sloan, Andrew P; Meyers, Eric; Carmel, Jason B

2017-07-15

Hand function is critical for independence, and neurological injury often impairs dexterity. To measure hand function in people or forelimb function in animals, sensors are employed to quantify manipulation. These sensors make assessment easier and more quantitative and allow automation of these tasks. While automated tasks improve objectivity and throughput, they also produce large amounts of data that can be burdensome to analyze. We created software called Dexterity that simplifies data analysis of automated reaching tasks. Dexterity is MATLAB software that enables quick analysis of data from forelimb tasks. Through a graphical user interface, files are loaded and data are identified and analyzed. These data can be annotated or graphed directly. Analysis is saved, and the graph and corresponding data can be exported. For additional analysis, Dexterity provides access to custom scripts created by other users. To determine the utility of Dexterity, we performed a study to evaluate the effects of task difficulty on the degree of impairment after injury. Dexterity analyzed two months of data and allowed new users to annotate the experiment, visualize results, and save and export data easily. Previous analysis of tasks was performed with custom data analysis, requiring expertise with analysis software. Dexterity made the tools required to analyze, visualize and annotate data easy to use by investigators without data science experience. Dexterity increases accessibility to automated tasks that measure dexterity by making analysis of large data intuitive, robust, and efficient. Copyright © 2017 Elsevier B.V. All rights reserved.

Green survivability in Fiber-Wireless (FiWi) broadband access network

NASA Astrophysics Data System (ADS)

Liu, Yejun; Guo, Lei; Gong, Bo; Ma, Rui; Gong, Xiaoxue; Zhang, Lincong; Yang, Jiangzi

2012-03-01

Fiber-Wireless (FiWi) broadband access network is a promising "last mile" access technology, because it integrates wireless and optical access technologies in terms of their respective merits, such as high capacity and stable transmission from optical access technology, and easy deployment and flexibility from wireless access technology. Since FiWi is expected to carry a large amount of traffic, numerous traffic flows may be interrupted by the failure of network components. Thus, survivability in FiWi is a key issue aiming at reliable and robust service. However, the redundant deployment of backup resource required for survivability usually causes huge energy consumption, which aggravates the global warming and accelerates the incoming of energy crisis. Thus, the energy-saving issue should be considered when it comes to survivability design. In this paper, we focus on the green survivability in FiWi, which is an innovative concept and remains untouched in the previous works to our best knowledge. We first review and discuss some challenging issues about survivability and energy-saving in FiWi, and then we propose some instructive solutions for its green survivability design. Therefore, our work in this paper will provide the technical references and research motivations for the energy-efficient and survivable FiWi development in the future.

Skin-Tissue-sparing Excision with Electrosurgical Peeling (STEEP): a surgical treatment option for severe hidradenitis suppurativa Hurley stage II/III.

PubMed

Blok, J L; Spoo, J R; Leeman, F W J; Jonkman, M F; Horváth, B

2015-02-01

Surgery is the only curative treatment for removal of the persistent sinus tracts in the skin that are characteristic of severe hidradenitis suppurativa (HS). Complete resection of the affected tissue by wide excision is currently regarded as the preferred surgical technique in these cases. However, relatively large amounts of healthy tissue are removed with this method and suitable skin-tissue-saving techniques aiming at creating less-extensive surgical defects are therefore needed in severe HS. We describe a skin-tissue-saving surgical technique for HS Hurley stage II-III disease: the Skin-Tissue-sparing Excision with Electrosurgical Peeling (STEEP) procedure. In contrast to wide excisions that generally reach into the deep subcutaneous fat, the fat is maximally spared with the STEEP procedure by performing successive tangential excisions of lesional tissue until the epithelialized bottom of the sinus tracts has been reached. From here, secondary intention healing can occur. In addition, fibrotic tissue is completely removed in the same manner as this also serves as a source of recurrence. This tissue-sparing technique results in low recurrence rates, high patient satisfaction with relatively short healing times and favourable cosmetic outcomes without contractures. © 2014 European Academy of Dermatology and Venereology.

Rigorous Results for the Distribution of Money on Connected Graphs

NASA Astrophysics Data System (ADS)

Lanchier, Nicolas; Reed, Stephanie

2018-05-01

This paper is concerned with general spatially explicit versions of three stochastic models for the dynamics of money that have been introduced and studied numerically by statistical physicists: the uniform reshuffling model, the immediate exchange model and the model with saving propensity. All three models consist of systems of economical agents that consecutively engage in pairwise monetary transactions. Computer simulations performed in the physics literature suggest that, when the number of agents and the average amount of money per agent are large, the limiting distribution of money as time goes to infinity approaches the exponential distribution for the first model, the gamma distribution with shape parameter two for the second model and a distribution similar but not exactly equal to a gamma distribution whose shape parameter depends on the saving propensity for the third model. The main objective of this paper is to give rigorous proofs of these conjectures and also extend these conjectures to generalizations of the first two models and a variant of the third model that include local rather than global interactions, i.e., instead of choosing the two interacting agents uniformly at random from the system, the agents are located on the vertex set of a general connected graph and can only interact with their neighbors.

Analysis of Multi-Flight Common Routes for Traffic Flow Management

NASA Technical Reports Server (NTRS)

Sheth, Kapil; Clymer, Alexis; Morando, Alex; Shih, Fu-Tai

2016-01-01

This paper presents an approach for creating common weather avoidance reroutes for multiple flights and the associated benefits analysis, which is an extension of the single flight advisories generated using the Dynamic Weather Routes (DWR) concept. These multiple flight advisories are implemented in the National Airspace System (NAS) Constraint Evaluation and Notification Tool (NASCENT), a nation-wide simulation environment to generate time- and fuel-saving alternate routes for flights during severe weather events. These single flight advisories are clustered together in the same Center by considering parameters such as a common return capture fix. The clustering helps propose routes called, Multi-Flight Common Routes (MFCR), that avoid weather and other airspace constraints, and save time and fuel. It is expected that these routes would also provide lower workload for traffic managers and controllers since a common route is found for several flights, and presumably the route clearances would be easier and faster. This study was based on 30-days in 2014 and 2015 each, which had most delays attributed to convective weather. The results indicate that many opportunities exist where individual flight routes can be clustered to fly along a common route to save a significant amount of time and fuel, and potentially reducing the amount of coordination needed.

Hot topic: Definition and implementation of a breeding value for feed efficiency in dairy cows.

PubMed

Pryce, J E; Gonzalez-Recio, O; Nieuwhof, G; Wales, W J; Coffey, M P; Hayes, B J; Goddard, M E

2015-10-01

A new breeding value that combines the amount of feed saved through improved metabolic efficiency with predicted maintenance requirements is described. The breeding value includes a genomic component for residual feed intake (RFI) combined with maintenance requirements calculated from either a genomic or pedigree estimated breeding value (EBV) for body weight (BW) predicted using conformation traits. Residual feed intake is only available for genotyped Holsteins; however, BW is available for all breeds. The RFI component of the "feed saved" EBV has 2 parts: Australian calf RFI and Australian lactating cow RFI. Genomic breeding values for RFI were estimated from a reference population of 2,036 individuals in a multi-trait analysis including Australian calf RFI (n=843), Australian lactating cow RFI (n=234), and UK and Dutch lactating cow RFI (n=958). In all cases, the RFI phenotypes were deviations from a mean of 0, calculated by correcting dry matter intake for BW, growth, and milk yield (in the case of lactating cows). Single nucleotide polymorphism effects were calculated from the output of genomic BLUP and used to predict breeding values of 4,106 Holstein sires that were genotyped but did not have RFI phenotypes themselves. These bulls already had BW breeding values calculated from type traits, from which maintenance requirements in kilograms of feed per year were inferred. Finally, RFI and the feed required for maintenance (through BW) were used to calculate a feed saved breeding value and expressed as the predicted amount of feed saved per year. Animals that were 1 standard deviation above the mean were predicted to eat 66 kg dry matter less per year at the same level of milk production. In a data set of genotyped Holstein sires, the mean reliability of the feed saved breeding value was 0.37. For Holsteins that are not genotyped and for breeds other than Holsteins, feed saved is calculated using BW only. From April 2015, feed saved has been included as part of the Australian national selection index, the Balanced Performance Index (BPI). Selection on the BPI is expected to lead to modest gains in feed efficiency. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

7 CFR 1944.407 - Limitations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... REGULATIONS (CONTINUED) HOUSING Self-Help Technical Assistance Grants § 1944.407 Limitations. The amount of... Regulations of the Department of Agriculture (Continued) RURAL HOUSING SERVICE, RURAL BUSINESS-COOPERATIVE... typical needed repairs, and the cost savings between self-help and contractor rehabilitation and repair...

Estimating Medicare and patient savings from the use of bevacizumab for the treatment of exudative age-related macular degeneration.

PubMed

Rosenfeld, Philip J; Windsor, Matthew A; Feuer, William J; Sun, Sissi J J; Frick, Kevin D; Swanson, Eric A; Huang, David

2018-04-12

The Medicare cost savings from the use of bevacizumab in the United States for the treatment of exudative age-related macular degeneration (AMD) were estimated by replacing the use of bevacizumab with ranibizumab and aflibercept. Retrospective trend study. Main outcome measures were spending by Medicare as tracked by Current Procedural Terminology (CPT) codes for intravitreal injections (67028) and treatment-specific J-codes (J0178, J2778, J9035, J3490 and J3590) for inhibitors of vascular endothelial growth factor. These claims were identified from the Medicare Provider Utilization and Payment Data from the Centers for Medicare and Medicaid Services among fee-for-service (FFS) Medicare beneficiaries from 2012 - 2015. The 2008 claims were acquired from the 100% fee-for-service (FFS) Part B Medicare Claims File. The use of bevacizumab from 2008 to 2015 resulted in an estimated savings of $17.3 billion, which corresponded to a $13.8 billion savings to Medicare and a $3.5 billion savings to patients. This amount underestimated the actual cost-savings to Medicare providers since approximately 30% of Medicare-eligible recipients received care within Medicare Advantage plans and were not included in this analysis. The cost savings from the use of bevacizumab from 2008-2015 for Medicare fee-for-service patients undergoing treatment for exudative AMD was estimated at $17.3 billion. Additional savings over the $17.3 billion would have accrued from the use of bevacizumab if diagnostic categories such as diabetic macular edema and retinal vein occlusion were included in this study. Copyright © 2018. Published by Elsevier Inc.

Laser blood saving campaign and world federation of societies for laser medicine and surgery

NASA Astrophysics Data System (ADS)

Ohshiro, Toshio

2004-09-01

Blood Saving Campaign is a campaign to lessen the risk of intra- and post-operative blood transfusion by decreasing the amount of blood loss during surgery and at the same time will lessen the risk of transmission of blood born diseases. The blood saved can be used to treat those afflicted with diseases such as hemophilia and aplastic anemia where blood transfusion is imperative for the survival of the patient. At the 7th forum of WFSLMS held in Germany 2003, the steering committee has evolved to an organizing committee of WFSLMS. The aim of WFSLMS is to contribute to the health and welfare of mankind through the merit of minimum tissue damage and high efficacy of hemostasis in laser medicine. Therefore we also organized a Laser Blood Saving Campaign (Laser B-SAC) committee within WFSLMS at the same congress. The methods of laser blood saving are divided into 4 categories. 1. Surgical Laser Treatment (HLLT). 2. Non-surgical Laser Therapy (LLLT). 3. Laser Treatment with Newly Developed Laser Machines. 4. Laser Treatment with Newly Developed Techniques. I will mention on the History of B-SAC, Action Plan of B-SAC and so on.

Drug product selection: the Florida experience.

PubMed Central

Vuturo, G J; Krischer, J P; McCormick, W C

1980-01-01

Drug product selection, the act of selecting and dispensing a lower cost generically equivalent product to that prescribed, is made possible in 46 states through recently enacted legislation. Florida's legislation is unique in that it requires pharmacists to product select under certain circumstances. This study reports on the results of a review of the Florida experience approximately one year after enactment of its drug product selection legislation. Nearly 132,000 prescriptions were sampled from 60 pharmacies during a four-month study period. This represents one per cent of all new prescriptions in the state and a three per cent sample of community pharmacies. Study results indicate that drug product selection on the average saves the consumer $1.92 per prescription. Further, under the provisions of this law the majority of cost savings (average reductions in acquisition costs between prescribed and dispensed products) are being passed along as savings to the consumer. During the four-month study period this amounted to a total prescription cost savings of nearly $425,000. Drug product selection occurs in approximately two per cent of all new prescriptions which compares favorably with results reported from other states but also suggests that additional savings can be realized under such legislation. PMID:7377418

A mobile asset sharing policy for hospitals with real time locating systems.

PubMed

Demircan-Yıldız, Ece Arzu; Fescioglu-Unver, Nilgun

2016-01-01

Each year, hospitals lose a considerable amount of time and money due to misplaced mobile assets. In addition the assets which remain in departments that frequently use them depreciate early, while other assets of the same type in different departments are rarely used. A real time locating system can prevent these losses when used with appropriate asset sharing policies. This research quantifies the amount of time a medium size hospital saves by using real time locating system and proposes an asset selection rule to eliminate the asset usage imbalance problem. The asset selection rule proposed is based on multi objective optimization techniques. The effectiveness of this rule on asset to patient time and asset utilization rate variance performance measures were tested using discrete event simulation method. Results show that the proposed asset selection rule improved the usage balance significantly. Sensitivity analysis showed that the proposed rule is robust to changes in demand rates and user preferences. Real time locating systems enable saving considerable amount of time in hospitals, and they can still be improved by integrating decision support mechanisms. Combining tracking technology and asset selection rules helps improve healthcare services.

Calibrated energy simulations of potential energy savings in actual retail buildings

NASA Astrophysics Data System (ADS)

Alhafi, Zuhaira

Retail stores are commercial buildings with high energy consumption due to their typically large volumes and long hours of operation. This dissertation assesses heating, ventilating and air conditioning saving strategies based on energy simulations with input parameters from actual retail buildings. The dissertation hypothesis is that "Retail store buildings will save a significant amount of energy by (1) modifying ventilation rates, and/or (2) resetting set point temperatures. These strategies have shown to be beneficial in previous studies. As presented in the literature review, potential energy savings ranged from 0.5% to 30% without compromising indoor thermal comfort and indoor air quality. The retail store buildings can be ventilated at rates significantly lower than rates called for in the ASHRAE Standard 62.1-2010 while maintaining acceptable indoor air quality. Therefore, two dissertation objectives are addressed: (1) Investigate opportunities to reduce ventilation rates that do not compromise indoor air quality in retail stores located in Central Pennsylvania, (2) Investigate opportunities to increase (in summer) and decrease (in winter) set point temperatures that do not compromise thermal comfort. This study conducted experimental measurements of ventilation rates required to maintain acceptable air quality and indoor environmental conditions requirements for two retail stores using ASHRAE Standard 62.1_2012. More specifically, among other parameters, occupancy density, indoor and outdoor pollutant concentrations, and indoor temperatures were measured continuously for one week interval. One of these retail stores were tested four times for a yearlong time period. Pollutants monitored were formaldehyde, carbon dioxide, particle size distributions and concentrations, as well as total volatile organic compounds. As a part of the base protocol, the number of occupants in each store was hourly counted during the test, and the results reveal that the occupant densities were approximately 20% to 30% of that called by ASHRAE 62.1. Formaldehyde was the most important contaminant of concern in retail stores investigated. Both stores exceeded the most conservative health guideline for formaldehyde (OEHHA TWA REL = 7.3 ppb). This study found that source removal and reducing the emission rate, as demonstrated in retail stores sampled in this study, is a viable strategy to meet the health guideline. Total volatile compound were present in retail stores at low concentrations well below health guidelines suggested by Molhave (1700microg /m 2) and Bridges (1000 microg /m2). Based on these results and through mass--balance modeling, different ventilation rate reduction scenarios were proposed, and for these scenarios the differences in energy consumption were estimated. Findings of all phases of this desertion have contributed to understanding (a) the trade-off between energy savings and ventilation rates that do not compromise indoor air quality, and (b) the trade-off between energy savings and resets of indoor air temperature that do not compromise thermal comfort. Two models for retail stores were built and calibrated and validated against actual utility bills. Energy simulation results indicated that by lowering the ventilation rates from measured and minimum references would reduce natural gas energy use by estimated values of 6% to 19%. Also, this study found that the electrical cooling energy consumption was not significantly sensitive to different ventilation rates. However, increasing indoor air temperature by 3°C in summer had a significant effect on the energy savings. In winter, both energy savings strategies, ventilation reduction and decrease in set points, had a significant effect on natural gas consumption. Specially, when the indoor air temperature 21°C was decreased to 19.4°C with the same amount of ventilation rate of Molhaves guideline for both cases. Interestingly, the temperature of 23.8°C (75°F), which is the lowest value of ASHRAE 55 thermal comfort for sedentary people (cashiers) and the highest value for thermal comfort adjustments due to activity level (customers and workers) that are calculated by using empirical equation, was the optimum temperature for sedentary and active people in Retail store buildings.

Development of Ulta-Efficient Electric Motors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shoykhet, B.; Schiferl, R.; Duckworth, R.

2008-05-01

Electric motors utilize a large amount of electrical energy in utility and industrial applications. Electric motors constructed with high temperature superconducting (HTS) materials have the potential to dramatically reduce electric motor size and losses. HTS motors are best suited for large motor applications at ratings above 1000 horsepower (hp), where the energy savings from the efficiency improvement can overcome the additional power required to keep the superconductors on the rotor cooled. Large HTS based motors are expected to be half the volume and have half the losses of conventional induction motors of the same rating. For a 5000 hp industrialmore » motor, this energy savings can result in $50,000 in operating cost savings over the course of a single year of operation. Since large horsepower motors utilize (or convert) about 30% of the electrical power generated in the United States and about 70% of large motors are candidates for replacement by HTS motors, the annual energy savings potential through the utilization of HTS motors can be up to $1 Billion in the United States alone. Research in the application of HTS materials to electric motors has lead to a number of HTS motor prototypes yet no industrial HTS motor product has yet been introduced. These motor demonstrations have been synchronous motors with HTS field windings, on the rotor. Figure 1-1 shows a solid model rendering of this type of motor. The rotor winding is made with HTS coils that are held at cryogenic temperature by introducing cooling fluid from the cryocooler to the rotor through a transfer coupling. The stator winding is made of copper wire. The HTS winding is thermally isolated from the warm armature and motor shafts by a vacuum insulation space and through the use of composite torque tubes. The stator in Figure 1-1 is an air core stator in that the stator teeth and a small part of the yoke is made up of nonmagnetic material so the magnetic fields distribute themselves as if in air. Between the HTS field winding and the physical air gap is a series of concentric cylinders that act as vacuum insulation space walls as well as conducting paths for induced currents to flow in order to shield the HTS winding and the rotor cold space from time dependent fields. These time dependent fields may be caused by rotor hunting, during a change in motor load, or by non-fundamental component voltages and currents applied by the inverter. These motors are variable speed controlled by the inverter. Common large motor utility and industrial applications are pump and fan drives that are best suited by a variable speed motor. Inverter control of the HTS motor eliminates the need to design the rotor for line starting, which would dump a large amount of heat into the rotor that would then heavily tax the cryogenic cooling system. The field winding is fed by a brushless exciter that provides DC current to the HTS rotor winding. The stator winding is air or water cooled. Technical and commercial hurdles to industrial HTS motor product introduction and customer acceptance include (1) the high cost of HTS wire and the cryogenic cooling system components, (2) customer concerns about reliability of HTS motors, and (3) the ability to attain the loss reduction potential of large HTS motors. Reliance Electric has demonstrated a number of HTS based electric motors up to a 1000 hp, variable speed synchronous motor with an HTS field winding in the year 2000. In 2001 this motor was tested to 1600 hp with a sinusoidal (constant frequency) supply. Figure 1-2 shows the HTS motor on the dynamometer test stand in the Reliance Electric test lab. The extensive test program of the 1000 hp motor successfully demonstrated the technical feasibility of large HTS motors and the basic technologies involved, however the test results did indicate the need for design refinements. In addition, test results served to identify other more fundamental critical technology issues, and revealed the need to continue research efforts in order to improve future HTS motor first cost, reliability, and performance. The lessons learned from the development and testing of the 1000 hp motor were the basis for the tasks proposed for the project that is being described in this final report. These eight tasks and the technology and commercial issues they address are listed in Table 1-1.« less

Impact of low cost refurbishable and standard spacecraft upon future NASA space programs. Payload effects follow-on study

NASA Technical Reports Server (NTRS)

1972-01-01

The study has concluded that there are very large space program cost savings to be obtained by use of low cost, refurbishable, and standard spacecraft in conjunction with the shuttle transportation system. The range of space program cost savings for three different groups of programs are shown in quantitative terms. The total savings for the 91 programs will range from $13.4 billion to $18.0 billion depending on the degree of hardware standardization. These savings, principally resulting from payload cost reductions, tangibly support the development costs of the shuttle system.

Why Nations Become Wealthy: The Effects of Adult Longevity on Saving

PubMed Central

Kinugasa, Tomoko; Mason, Andrew

2007-01-01

We analyze steady state and out-of-steady-state effects of the transition in adult longevity on the national saving rate using historical data and international panel data. The rise in adult life expectancy has a large and statistically significant effect on aggregate saving. The effects have been especially pronounced in East Asia because its mortality transition was very rapid. Gains in life expectancy are much more important than declines in child dependency. Population aging may not lead to lower saving rates in the future if life expectancy and the duration of retirement continue to increase. PMID:18167514

Disaster Response Modeling Through Discrete-Event Simulation

NASA Technical Reports Server (NTRS)

Wang, Jeffrey; Gilmer, Graham

2012-01-01

Organizations today are required to plan against a rapidly changing, high-cost environment. This is especially true for first responders to disasters and other incidents, where critical decisions must be made in a timely manner to save lives and resources. Discrete-event simulations enable organizations to make better decisions by visualizing complex processes and the impact of proposed changes before they are implemented. A discrete-event simulation using Simio software has been developed to effectively analyze and quantify the imagery capabilities of domestic aviation resources conducting relief missions. This approach has helped synthesize large amounts of data to better visualize process flows, manage resources, and pinpoint capability gaps and shortfalls in disaster response scenarios. Simulation outputs and results have supported decision makers in the understanding of high risk locations, key resource placement, and the effectiveness of proposed improvements.

Neonatal heart rate prediction.

PubMed

Abdel-Rahman, Yumna; Jeremic, Aleksander; Tan, Kenneth

2009-01-01

Technological advances have caused a decrease in the number of infant deaths. Pre-term infants now have a substantially increased chance of survival. One of the mechanisms that is vital to saving the lives of these infants is continuous monitoring and early diagnosis. With continuous monitoring huge amounts of data are collected with so much information embedded in them. By using statistical analysis this information can be extracted and used to aid diagnosis and to understand development. In this study we have a large dataset containing over 180 pre-term infants whose heart rates were recorded over the length of their stay in the Neonatal Intensive Care Unit (NICU). We test two types of models, empirical bayesian and autoregressive moving average. We then attempt to predict future values. The autoregressive moving average model showed better results but required more computation.

[Information exchange via internet--possibilities, limits, future].

PubMed

Schmiedl, S; Geishauser, M; Klöppel, M; Biemer, E

1998-01-01

Today, the exchange of information in the Internet is dominated by the WWW and e-mail. Discussion groups like mailing lists and newsgroups also permit communication in groups. Information retrieval becomes a crucial challenge in using the Internet. In the field of medicine, three more aspects are of special importance: privacy, legal requirements, and the necessity of transferring large amounts of data. For these problems, today's Internet doesn't provide a sufficient solution yet. Future developments will not only improve the existing services, but also lead to fundamental changes in the transfer technologies: Safer data transfer is to be ensured by new encrypting software together with the planned transfer protocol IPv6. Introducing the new transfer mode ATM will lead to better and resource saving transmission. Computer, telephone and TV networks will grow together, resulting in convergence of media.

Evaluation of subgrid-scale turbulence models using a fully simulated turbulent flow

NASA Technical Reports Server (NTRS)

Clark, R. A.; Ferziger, J. H.; Reynolds, W. C.

1977-01-01

An exact turbulent flow field was calculated on a three-dimensional grid with 64 points on a side. The flow simulates grid-generated turbulence from wind tunnel experiments. In this simulation, the grid spacing is small enough to include essentially all of the viscous energy dissipation, and the box is large enough to contain the largest eddy in the flow. The method is limited to low-turbulence Reynolds numbers, in our case R sub lambda = 36.6. To complete the calculation using a reasonable amount of computer time with reasonable accuracy, a third-order time-integration scheme was developed which runs at about the same speed as a simple first-order scheme. It obtains this accuracy by saving the velocity field and its first-time derivative at each time step. Fourth-order accurate space-differencing is used.

Atlanta congestion reduction demonstration. National evaluation : cost benefit analysis test plan.

DOT National Transportation Integrated Search

2001-01-01

Initiatives to evaluate the impact of Advanced Traveler Information Services (ATIS) over the last ten years have returned what appears to be contradictory results with respect to the time savings of ATIS users: large perceived time savings reported b...

Home Energy Assessments

ScienceCinema

Dispenza, Jason

2017-12-27

A home energy assessment, also known as a home energy audit, is the first step to assess how much energy your home consumes and to evaluate what measures you can take to make your home more energy efficient. An assessment will show you problems that may, when corrected, save you significant amounts of money over time. This video shows some of the ways that a contractor may test your home during an assessment, and helps you understand how an assessment can help you move toward energy savings. Find out more at: http://www.energysavers.gov/your_home/energy_audits/index.cfm/mytopic=11160

The energy impacts of solar heating.

PubMed

Whipple, C

1980-04-18

The energy required to build and install solar space- and water-heating equipment is compared to the energy it saves under two solar growth paths corresponding to high and low rates of implementation projected by the Domestic Policy Review of Solar Energy. For the rapid growth case, the cumulative energy invested to the year 2000 is calculated to be (1/2) to 1(1/2) times the amount saved. An impact of rapid solar heating implementation is to shift energy demand from premium heating fuels (natural gas and oil) to coal and nuclear power use in the industries that provide materials for solar equipment.

77 FR 16165 - United States Savings Bonds and Notes; Payments

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-20

... security by imprinting the word ``PAID'' on its face and entering the amount and date of the actual payment... imprint of a payment stamp. The stamp may not exceed 1\\1/8\\ inches in any dimension and must include the...

LabVIEW: a software system for data acquisition, data analysis, and instrument control.

PubMed

Kalkman, C J

1995-01-01

Computer-based data acquisition systems play an important role in clinical monitoring and in the development of new monitoring tools. LabVIEW (National Instruments, Austin, TX) is a data acquisition and programming environment that allows flexible acquisition and processing of analog and digital data. The main feature that distinguishes LabVIEW from other data acquisition programs is its highly modular graphical programming language, "G," and a large library of mathematical and statistical functions. The advantage of graphical programming is that the code is flexible, reusable, and self-documenting. Subroutines can be saved in a library and reused without modification in other programs. This dramatically reduces development time and enables researchers to develop or modify their own programs. LabVIEW uses a large amount of processing power and computer memory, thus requiring a powerful computer. A large-screen monitor is desirable when developing larger applications. LabVIEW is excellently suited for testing new monitoring paradigms, analysis algorithms, or user interfaces. The typical LabVIEW user is the researcher who wants to develop a new monitoring technique, a set of new (derived) variables by integrating signals from several existing patient monitors, closed-loop control of a physiological variable, or a physiological simulator.

Discrete Event Modeling and Massively Parallel Execution of Epidemic Outbreak Phenomena

DOE Office of Scientific and Technical Information (OSTI.GOV)

Perumalla, Kalyan S; Seal, Sudip K

2011-01-01

In complex phenomena such as epidemiological outbreaks, the intensity of inherent feedback effects and the significant role of transients in the dynamics make simulation the only effective method for proactive, reactive or post-facto analysis. The spatial scale, runtime speed, and behavioral detail needed in detailed simulations of epidemic outbreaks make it necessary to use large-scale parallel processing. Here, an optimistic parallel execution of a new discrete event formulation of a reaction-diffusion simulation model of epidemic propagation is presented to facilitate in dramatically increasing the fidelity and speed by which epidemiological simulations can be performed. Rollback support needed during optimistic parallelmore » execution is achieved by combining reverse computation with a small amount of incremental state saving. Parallel speedup of over 5,500 and other runtime performance metrics of the system are observed with weak-scaling execution on a small (8,192-core) Blue Gene / P system, while scalability with a weak-scaling speedup of over 10,000 is demonstrated on 65,536 cores of a large Cray XT5 system. Scenarios representing large population sizes exceeding several hundreds of millions of individuals in the largest cases are successfully exercised to verify model scalability.« less

Simple Myths and Basic Maths about Greening Irrigation

NASA Astrophysics Data System (ADS)

Dionisio Pérez-Blanco, C.; Gómez, C. Mario

2014-05-01

Managing water is a very complex societal issue that needs to involve legal, environmental, technological, financial and political considerations that are difficult to co-ordinate in an effective manner. This complexity and the lack of an agreed assessment framework have often implied that political decisions, largely driven by transaction costs (especially the bargaining costs required to come to an acceptable agreement with all the parties involved), have overshadowed and prevailed over other considerations. As a result, (financially) expensive solutions such as irrigation modernization programmes have been preferred to their inexpensive alternatives to save water, such as quotas or pricing policies. However, greening the economy is mostly about improving water governance and not only about putting the existing resource saving technical alternatives into practice. Focusing on the second and forgetting the first risks finishing with a highly efficient use of water services at the level of each individual user but with an unsustainable amount of water use for the entire economy. This might be happening already in many places with the modernization of irrigated agriculture, the world's largest water user and the one offering the most promising water saving opportunities. In spite of high expectations, costly modern irrigation techniques seem not to be contributing to reduce water scarcity and increase drought resiliency. In fact, according to the little evidence available, in some areas they are resulting in higher water use. Building on basic economic principles this study aims to show the conditions under which this apparently paradoxical outcome, known as the Jevons' Paradox, might appear. This basic model is expected to serve as guidance for assessing the actual outcomes of increasing irrigation efficiency and to discuss the changes in water governance that would be required for this to make a real contribution to sustainable water management.

Integrated control of emission reductions, energy-saving, and cost-benefit using a multi-objective optimization technique in the pulp and paper industry.

PubMed

Wen, Zongguo; Xu, Chang; Zhang, Xueying

2015-03-17

Reduction of water pollutant emissions and energy consumption is regarded as a key environmental objective for the pulp and paper industry. The paper develops a bottom-up model called the Industrial Water Pollutant Control and Technology Policy (IWPCTP) based on an industrial technology simulation system and multiconstraint technological optimization. Five policy scenarios covering the business as usual (BAU) scenario, the structural adjustment (SA) scenario, the cleaner technology promotion (CT) scenario, the end-treatment of pollutants (EOP) scenario, and the coupling measures (CM) scenario have been set to describe future policy measures related to the development of the pulp and paper industry from 2010-2020. The outcome of this study indicates that the energy saving amount under the CT scenario is the largest, while that under the SA scenario is the smallest. Under the CT scenario, savings by 2020 include 70 kt/year of chemical oxygen demand (COD) emission reductions and savings of 7443 kt of standard coal, 539.7 ton/year of ammonia nitrogen (NH4-N) emission reductions, and savings of 7444 kt of standard coal. Taking emission reductions, energy savings, and cost-benefit into consideration, cleaner technologies like highly efficient pulp washing, dry and wet feedstock preparation, and horizontal continuous cooking, medium and high consistency pulping and wood dry feedstock preparation are recommended.

Behavioral economics perspectives on public sector pension plans

PubMed Central

BESHEARS, JOHN; CHOI, JAMES J.; LAIBSON, DAVID; MADRIAN, BRIGITTE C.

2011-01-01

We describe the pension plan features of the states and the largest cities and counties in the U.S. Unlike in the private sector, defined benefit (DB) pensions are still the norm in the public sector. However, a few jurisdictions have shifted toward defined contribution (DC) plans as their primary savings plan, and fiscal pressures are likely to generate more movement in this direction. Holding fixed a public employee’s work and salary history, we show that DB retirement income replacement ratios vary greatly across jurisdictions. This creates large variation in workers’ need to save for retirement in other accounts. There is also substantial heterogeneity across jurisdictions in the savings generated in primary DC plans because of differences in the level of mandatory employer and employee contributions. One notable difference between public and private sector DC plans is that public sector primary DC plans are characterized by required employee or employer contributions (or both), whereas private sector plans largely feature voluntary employee contributions that are supplemented by an employer match. We conclude by applying lessons from savings behavior in private sector savings plans to the design of public sector plans. PMID:21789032

NREL Technical Reports Guide the Way to 50% Energy Savings in Hospitals, Office Buildings (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2011-02-01

Researchers at the National Renewable Energy Laboratory (NREL) have developed two technical reports that provide recommendations to help designers and operators of large office buildings and hospitals achieve at least a 50% energy savings using existing technology.

Assessment of the greenhouse effect impact of technologies used for energy recovery from municipal waste: a case for England.

PubMed

Papageorgiou, A; Barton, J R; Karagiannidis, A

2009-07-01

Waste management activities contribute to global greenhouse gas emissions approximately by 4%. In particular the disposal of waste in landfills generates methane that has high global warming potential. Effective mitigation of greenhouse gas emissions is important and could provide environmental benefits and sustainable development, as well as reduce adverse impacts on public health. The European and UK waste policy force sustainable waste management and especially diversion from landfill, through reduction, reuse, recycling and composting, and recovery of value from waste. Energy from waste is a waste management option that could provide diversion from landfill and at the same time save a significant amount of greenhouse gas emissions, since it recovers energy from waste which usually replaces an equivalent amount of energy generated from fossil fuels. Energy from waste is a wide definition and includes technologies such as incineration of waste with energy recovery, or combustion of waste-derived fuels for energy production or advanced thermal treatment of waste with technologies such as gasification and pyrolysis, with energy recovery. The present study assessed the greenhouse gas emission impacts of three technologies that could be used for the treatment of Municipal Solid Waste in order to recover energy from it. These technologies are Mass Burn Incineration with energy recovery, Mechanical Biological Treatment via bio-drying and Mechanical Heat Treatment, which is a relatively new and uninvestigated method, compared to the other two. Mechanical Biological Treatment and Mechanical Heat Treatment can turn Municipal Solid Waste into Solid Recovered Fuel that could be combusted for energy production or replace other fuels in various industrial processes. The analysis showed that performance of these two technologies depends strongly on the final use of the produced fuel and they could produce GHG emissions savings only when there is end market for the fuel. On the other hand Mass Burn Incineration generates greenhouse gas emission savings when it recovers electricity and heat. Moreover the study found that the expected increase on the amount of Municipal Solid Waste treated for energy recovery in England by 2020 could save greenhouse gas emission, if certain Energy from Waste technologies would be applied, under certain conditions.

Experiences of using the GMP audit preparation tool in pharmaceutical contract manufacturer audits.

PubMed

Linna, Anu; Korhonen, Mirka; Airaksinen, Marja; Juppo, Anne Mari

2010-06-01

Use of external contractors is nowadays inevitable in the pharmaceutical industry. Therefore the amount of current good manufacturing practice audits has been increasing. During the audit, a large amount of items should be covered in a limited amount of time. Consequently, pharmaceutical companies should have systematic and effective ways to manage and prepare for the audits. This study is a continuation to the earlier study, where a tool for the preparation of cGMP audit was developed and its content was validated. The objective of this study was to evaluate the usefulness of the developed tool in audit preparation and during the actual cGMP audit. Three qualitative research methods were used in this study (observation, interviews, and opinion survey). First, the validity of the information given through the tool was examined by comparing the responses to the actual conditions observed during the contract manufacturer audits (n = 15). Additionally the opinions of the contract manufacturers of the tool were gathered (n = 10) and the auditors were interviewed (n = 2). The developed tool was proven to be useful in audit preparation phase from both the auditor's and the contract manufacturers' point of view. Furthermore, using the tool can also save some time when performing the audit. The results show that using the tool can give significant support in audit preparation phase and also during the actual audit.

Estimating customer electricity savings from projects installed by the U.S. ESCO industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carvallo, Juan Pablo; Larsen, Peter H.; Goldman, Charles A.

The U.S. energy service company (ESCO) industry has a well-established track record of delivering substantial energy and dollar savings in the public and institutional facilities sector, typically through the use of energy savings performance contracts (ESPC) (Larsen et al. 2012; Goldman et al. 2005; Hopper et al. 2005, Stuart et al. 2013). This ~$6.4 billion industry, which is expected to grow significantly over the next five years, may play an important role in achieving demand-side energy efficiency under local/state/federal environmental policy goals. To date, there has been little or no research in the public domain to estimate electricity savings formore » the entire U.S. ESCO industry. Estimating these savings levels is a foundational step in order to determine total avoided greenhouse gas (GHG) emissions from demand-side energy efficiency measures installed by U.S. ESCOs. We introduce a method to estimate the total amount of electricity saved by projects implemented by the U.S. ESCO industry using the Lawrence Berkeley National Laboratory (LBNL) /National Association of Energy Service Companies (NAESCO) database of projects and LBNL’s biennial industry survey. We report two metrics: incremental electricity savings and savings from ESCO projects that are active in a given year (e.g., 2012). Overall, we estimate that in 2012 active U.S. ESCO industry projects generated about 34 TWh of electricity savings—15 TWh of these electricity savings were for MUSH market customers who did not rely on utility customer-funded energy efficiency programs (see Figure 1). This analysis shows that almost two-thirds of 2012 electricity savings in municipal, local and state government facilities, universities/colleges, K-12 schools, and healthcare facilities (i.e., the so-called “MUSH” market) were not supported by a utility customer-funded energy efficiency program.« less

A Novel Sensor Platform Matching the Improved Version of IPMVP Option C for Measuring Energy Savings

PubMed Central

Tseng, Yen-Chieh; Lee, Da-Sheng; Lin, Cheng-Fang; Chang, Ching-Yuan

2013-01-01

It is easy to measure energy consumption with a power meter. However, energy savings cannot be directly computed by the powers measured using existing power meter technologies, since the power consumption only reflects parts of the real energy flows. The International Performance Measurement and Verification Protocol (IPMVP) was proposed by the Efficiency Valuation Organization (EVO) to quantify energy savings using four different methodologies of A, B, C and D. Although energy savings can be estimated following the IPMVP, there are limitations on its practical implementation. Moreover, the data processing methods of the four IPMVP alternatives use multiple sensors (thermometer, hygrometer, Occupant information) and power meter readings to simulate all facilities, in order to determine an energy usage benchmark and the energy savings. This study proposes a simple sensor platform to measure energy savings. Using usually the Electronic Product Code (EPC) global standard, an architecture framework for an information system is constructed that integrates sensors data, power meter readings and occupancy conditions. The proposed sensor platform is used to monitor a building with a newly built vertical garden system (VGS). A VGS shields solar radiation and saves on energy that would be expended on air-conditioning. With this platform, the amount of energy saved in the whole facility is measured and reported in real-time. The data are compared with those obtained from detailed measurement and verification (M&V) processes. The discrepancy is less than 1.565%. Using measurements from the proposed sensor platform, the energy savings for the entire facility are quantified, with a resolution of ±1.2%. The VGS gives an 8.483% daily electricity saving for the building. Thus, the results show that the simple sensor platform proposed by this study is more widely applicable than the four complicated IPMVP alternatives and the VGS is an effective tool in reducing the carbon footprint of a building. PMID:23698273

41 CFR 105-56.025 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... GSA provides financial support services to the other agency on a reimbursable basis. Financial support... programs, including contributions to the Thrift Savings Plan (TSP); premiums for life (excluding amounts...) Pay means basic pay, special pay, incentive pay, retired pay, retainer pay, or in the case of an...

Exploratory study of hot-in-place recycling of asphalt pavements, volume II : appendices.

DOT National Transportation Integrated Search

1994-11-01

Hot-in-place recycling (HIR) is a method for rehabilitation of asphalt pavements. Potential for cost savings and resource preservation are high because existing pavement materials are processed on-site, with only the addition of small amounts of recy...

The Base 32 Method: An Improved Method for Coding Sibling Constellations.

ERIC Educational Resources Information Center

Perfetti, Lawrence J. Carpenter

1990-01-01

Offers new sibling constellation coding method (Base 32) for genograms using binary and base 32 numbers that saves considerable microcomputer memory. Points out that new method will result in greater ability to store and analyze larger amounts of family data. (Author/CM)

WAGE INCENTIVES FOR SOLID WASTE COLLECTION PERSONNEL

EPA Science Inventory

An assessment was made of a time and wage incentive program for solid waste collection and supervisory personnel in the test city, Covington, Kentucky. On an annualized basis, cost savings amounting to $113,000 (19 percent of budget) resulted from implementation of the new progra...

Repayment policy for multiple loans

PubMed Central

2017-01-01

The Repayment Policy for Multiple Loans is about a given set of loans and a monthly incoming cash flow: what is the best way to allocate the monthly income to repay such loans? In this article, we close the almost 20-year-old open question about how to model the repayment policy for multiple loans problem together with its computational complexity. Thus, we propose a mixed integer linear programming model that establishes an optimal repayment schedule by minimizing the total amount of cash required to repay the loans. We prove that the most employed repayment strategies, such as the highest interest debt and the debt snowball methods, are not optimal. Experimental results on simulated cases based on real data show that our methodology obtains on average more than 4% of savings, that is, the debtor pays approximately 4% less to the bank or loaner, which is a considerable amount in finances. In certain cases, the debtor can save up to 40%. PMID:28430786

Energy Reduction Effect of the South-to-North Water Diversion Project in China.

PubMed

Zhao, Yong; Zhu, Yongnan; Lin, Zhaohui; Wang, Jianhua; He, Guohua; Li, Haihong; Li, Lei; Wang, Hao; Jiang, Shan; He, Fan; Zhai, Jiaqi; Wang, Lizhen; Wang, Qingming

2017-11-21

The North China Plain, with a population of approximately 150 million, is facing severe water scarcity. The over-exploitation of groundwater in the region, with accumulation amounts reaching more than 150 billion m 3 , causes a series of hydrological and geological problems together with the consumption of a significant amount of energy. Here, we highlight the energy and greenhouse gas-related environmental co-benefits of the South-to-North Water Diversion Project (SNWDP). Moreover, we evaluate the energy-saving effect of SNWDP on groundwater exploitation based on the groundwater-exploitation reduction program implemented by the Chinese government. Our results show that the transferred water will replace about 2.97 billion m 3 of exploited groundwater in the water reception area by 2020 and hence reduce energy consumption by 931 million kWh. Further, by 2030, 6.44 billion m 3 of groundwater, which accounts for 27% of the current groundwater withdrawal, will save approximately 7% of Beijing's current thermal power generation output.

Willingness to pay per quality-adjusted life year for life-saving treatments in Thailand.

PubMed

Nimdet, Khachapon; Ngorsuraches, Surachat

2015-10-05

To estimate the willingness to pay (WTP) per quality-adjusted life year (QALY) value for life-saving treatments and to determine factors affecting the WTP per QALY value. A cross-sectional survey with multistage sampling and face-to-face interviews. General population in the southern part of Thailand. A total of 600 individuals were included in the study. Only 554 (92.3%) responses were usable for data analyses. Participants were asked for the maximum amount of WTP value for life-saving treatments by an open-ended question. EQ-5D-3L and visual analogue scale (VAS) were used to estimate additional QALY. The amount of WTP values varied from 0 to 720,000 Baht/year (approximately 32 Baht=US$1). The averages of additional QALY obtained from VAS and EQ-5D-3L were only slightly different (0.872 and 0.853, respectively). The averages of WTP per QALY obtained from VAS and EQ-5D-3L were 244,720 and 243,120 Baht/QALY, respectively. As compared to male participants, female participants were more likely to pay less for an additional QALY (p=0.007). In addition, participants with higher household incomes tended to have higher WTP per QALY values (p<0.001). Our study added another WTP per QALY value specifically for life-saving treatments, which would complement the current cost-effectiveness threshold used in Thailand and optimise patient access to innovative treatments or technologies. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Performance Contracting: Taking School Technology Green

ERIC Educational Resources Information Center

Taival, Dane

2009-01-01

Energy efficiency makes fiscal and environmental sense, and so does energy savings performance contracting. Because an energy savings performance contract can create a self-funding package of products and services that reduce energy and operating costs, over time, school districts' sometimes-large initial investment in emerging technologies saves…

Concept for a power system controller for large space electrical power systems

NASA Technical Reports Server (NTRS)

Lollar, L. F.; Lanier, J. R., Jr.; Graves, J. R.

1981-01-01

The development of technology for a fail-operatonal power system controller (PSC) utilizing microprocessor technology for managing the distribution and power processor subsystems of a large multi-kW space electrical power system is discussed. The specific functions which must be performed by the PSC, the best microprocessor available to do the job, and the feasibility, cost savings, and applications of a PSC were determined. A limited function breadboard version of a PSC was developed to demonstrate the concept and potential cost savings.

How to Study Biofilms after Microbial Colonization of Materials Used in Orthopaedic Implants.

PubMed

Drago, Lorenzo; Agrappi, Serse; Bortolin, Monica; Toscano, Marco; Romanò, Carlo Luca; De Vecchi, Elena

2016-02-26

Over the years, various techniques have been proposed for the quantitative evaluation of microbial biofilms. Spectrophotometry after crystal violet staining is a widespread method for biofilm evaluation, but several data indicate that it does not guarantee a good specificity, although it is rather easy to use and cost saving. Confocal laser microscopy is one of the most sensitive and specific tools to study biofilms, and it is largely used for research. However, in some cases, no quantitative measurement of the matrix thickness or of the amount of embedded microorganisms has been performed, due to limitation in availability of dedicated software. For this reason, we have developed a protocol to evaluate the microbial biofilm formed on sandblasted titanium used for orthopaedic implants, that allows measurement of biomass volume and the amount of included cells. Results indicate good reproducibility in terms of measurement of biomass and microbial cells. Moreover, this protocol has proved to be applicable for evaluation of the efficacy of different anti-biofilm treatments used in the orthopaedic setting. Summing up, the protocol here described is a valid and inexpensive method for the study of microbial biofilm on prosthetic implant materials.

Chapter 2: Commercial and Industrial Lighting Evaluation Protocol. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurnik, Charles W; Gowans, Dakers; Telarico, Chad

The Commercial and Industrial Lighting Evaluation Protocol (the protocol) describes methods to account for gross energy savings resulting from the programmatic installation of efficient lighting equipment in large populations of commercial, industrial, and other nonresidential facilities. This protocol does not address savings resulting from changes in codes and standards, or from education and training activities. A separate Uniform Methods Project (UMP) protocol, Chapter 3: Commercial and Industrial Lighting Controls Evaluation Protocol, addresses methods for evaluating savings resulting from lighting control measures such as adding time clocks, tuning energy management system commands, and adding occupancy sensors.

Financing physical therapy doctoral education: methods used by entry-level students and the financial impact after graduation.

PubMed

Thompson, Kris; Coon, Jill; Handford, Leandrea

2011-01-01

With the move to the doctor of physical therapy (DPT) degree and increasing tuition costs, there is concern about financing entry-level education. The purposes of this study were to identify how students finance their DPT education and to describe the financial impact after graduation. A written survey was used to collect data on financing DPT education, student debt, and the financial impact on graduates. There were 92 subjects who had graduated from one program. Frequencies as well as nonparametric statistics using cross-tabulations and chi-squared statistics were calculated. The response rate was 55%. Of the respondents, 86% had student loans, 66% worked during school, 57% received some family assistance, and 21% had some scholarship support. The amount of monthly loan repayment was not statistically related to the ability to save for a house, the ability to obtain a loan for a house or car, or the decision to have children. Saving for the future (p = 0.016) and lifestyle choices (p = 0.035) were related to the amount of monthly loan repayment. Major sources of funding were student loans, employment income, and/or family assistance. Respondent's ability to save for the future and lifestyle choices were negatively impacted when loan debt increased. Physical therapist education programs should consider offering debt planning and counseling.

Application of neural networks to group technology

NASA Astrophysics Data System (ADS)

Caudell, Thomas P.; Smith, Scott D. G.; Johnson, G. C.; Wunsch, Donald C., II

1991-08-01

Adaptive resonance theory (ART) neural networks are being developed for application to the industrial engineering problem of group technology--the reuse of engineering designs. Two- and three-dimensional representations of engineering designs are input to ART-1 neural networks to produce groups or families of similar parts. These representations, in their basic form, amount to bit maps of the part, and can become very large when the part is represented in high resolution. This paper describes an enhancement to an algorithmic form of ART-1 that allows it to operate directly on compressed input representations and to generate compressed memory templates. The performance of this compressed algorithm is compared to that of the regular algorithm on real engineering designs and a significant savings in memory storage as well as a speed up in execution is observed. In additions, a `neural database'' system under development is described. This system demonstrates the feasibility of training an ART-1 network to first cluster designs into families, and then to recall the family when presented a similar design. This application is of large practical value to industry, making it possible to avoid duplication of design efforts.

Remote sensing techniques in cultural resource management archaeology

NASA Astrophysics Data System (ADS)

Johnson, Jay K.; Haley, Bryan S.

2003-04-01

Cultural resource management archaeology in the United States concerns compliance with legislation set in place to protect archaeological resources from the impact of modern activities. Traditionally, surface collection, shovel testing, test excavation, and mechanical stripping are used in these projects. These methods are expensive, time consuming, and may poorly represent the features within archaeological sites. The use of remote sensing techniques in cultural resource management archaeology may provide an answer to these problems. Near-surface geophysical techniques, including magnetometry, resistivity, electromagnetics, and ground penetrating radar, have proven to be particularly successful at efficiently locating archaeological features. Research has also indicated airborne and satellite remote sensing may hold some promise in the future for large-scale archaeological survey, although this is difficult in many areas of the world where ground cover reflect archaeological features in an indirect manner. A cost simulation of a hypothetical data recovery project on a large complex site in Mississippi is presented to illustrate the potential advantages of remote sensing in a cultural resource management setting. The results indicate these techniques can save a substantial amount of time and money for these projects.

Healthcare cost savings estimator tool for chronic disease self-management program: a new tool for program administrators and decision makers.

PubMed

Ahn, SangNam; Smith, Matthew Lee; Altpeter, Mary; Post, Lindsey; Ory, Marcia G

2015-01-01

Chronic disease self-management education (CDSME) programs have been delivered to more than 100,000 older Americans with chronic conditions. As one of the Stanford suite of evidence-based CDSME programs, the chronic disease self-management program (CDSMP) has been disseminated in diverse populations and settings. The objective of this paper is to introduce a practical, universally applicable tool to assist program administrators and decision makers plan implementation efforts and make the case for continued program delivery. This tool was developed utilizing data from a recent National Study of CDSMP to estimate national savings associated with program participation. Potential annual healthcare savings per CDSMP participant were calculated based on averted emergency room visits and hospitalizations. While national data can be utilized to estimate cost savings, the tool has built-in features allowing users to tailor calculations based on their site-specific data. Building upon the National Study of CDSMP's documented potential savings of $3.3 billion in healthcare costs by reaching 5% of adults with one or more chronic conditions, two heuristic case examples were also explored based on different population projections. The case examples show how a small county and large metropolitan city were not only able to estimate healthcare savings ($38,803 for the small county; $732,290 for the large metropolitan city) for their existing participant populations but also to project significant healthcare savings if they plan to reach higher proportions of middle-aged and older adults. Having a tool to demonstrate the monetary value of CDSMP can contribute to the ongoing dissemination and sustainability of such community-based interventions. Next steps will be creating a user-friendly, internet-based version of Healthcare Cost Savings Estimator Tool: CDSMP, followed by broadening the tool to consider cost savings for other evidence-based programs.

Staging Airliner Service

NASA Technical Reports Server (NTRS)

Hahn, Andrew S.

2007-01-01

There is a general consensus building that historically high fuel prices and greater public awareness of the emissions that result from burning fuel are going to be long-term concerns for those who design, build, and operate airliners. The possibility of saving both fuel and reducing emissions has rekindled interest in breaking very long-range airline flights into multiple stages or even adopting in-flight refueling. It is likely that staging will result in lower fuel burn, and recent published reports have suggested that the savings are substantial, particularly if the airliner is designed from the outset for this kind of operation. Given that staging runs against the design and operation historical trend, this result begs for further attention. This paper will examine the staging question, examining both analytic and numeric performance estimation methodologies to quantify the likely amount of fuel savings that can be expected and the resulting design impacts on the airliner.

Dryer cuts fuel usage by equivalent of 6-million scf/yr

DOE Office of Scientific and Technical Information (OSTI.GOV)

List, K.H.; Powers, J.

Drying is an integral part of the production of ZnO pellets, a specific requirement for producing a uniform end product. The dryer has to be able to cure the product for a finite period at temperatures up to 500/sup 0/C in the same unit. Substantial savings have been realized because the dryer has enabled the user to optimize operating conditions. Continuous on-stream operations requiring minimum operator attendance, automatic controls, simplicity of design contruction, and the unit's ability to use waste heat also contribute to these savings. Gas exhausted from a nearby kiln provides the total heat requirement for the dryer.more » Positive delivery of the hot flue gas is assured by a blower and automatically controlled dampers. Annual fuel savings based on the use of waste heat, amounts to an equiv of 6 million scf of natural gas. 1 figure.« less

Take charge of your e-mail!

PubMed

Mehta, Neil B; Atreja, Ashish; Jain, Anil

2008-08-01

Although e-mail is supposed to help save time and increase efficiency, for many it has become a burden. You can fight e-mail overload by taking steps to decrease the amount of unwanted e-mail you receive and by managing your in-box in an organized manner.

12 CFR 544.1 - Federal mutual charter.

Code of Federal Regulations, 2010 CFR

2010-01-01

... (“Office”). Section 5. Capital. The association may raise capital by accepting payments on savings and... her delegate. Section 8. Capital, surplus, and distribution of earnings. The association shall maintain for the purpose of meeting losses the amount of capital required by section 5 of the Home Owners...

Planning A Town To Save the Environment

EPA Science Inventory

Much of the environment is compromised due to land-use change and development to meet human needs. Because the environment also sustains human life, the amount of the environment that can be compromised is limited by how much must remain to meet human needs. Although people can...

31 CFR 363.59 - What is a payroll savings plan?

Code of Federal Regulations, 2014 CFR

2014-07-01

... zero-percent certificate of indebtedness. (See Subpart D for more information about a payroll zero-percent certificate of indebtedness.) When you have accumulated a sufficient amount of payroll zero... that you selected, the TreasuryDirect® system will automatically redeem your payroll zero-percent...

Efficient Memory Access with NumPy Global Arrays using Local Memory Access

DOE Office of Scientific and Technical Information (OSTI.GOV)

Daily, Jeffrey A.; Berghofer, Dan C.

This paper discusses the work completed working with Global Arrays of data on distributed multi-computer systems and improving their performance. The tasks completed were done at Pacific Northwest National Laboratory in the Science Undergrad Laboratory Internship program in the summer of 2013 for the Data Intensive Computing Group in the Fundamental and Computational Sciences DIrectorate. This work was done on the Global Arrays Toolkit developed by this group. This toolkit is an interface for programmers to more easily create arrays of data on networks of computers. This is useful because scientific computation is often done on large amounts of datamore » sometimes so large that individual computers cannot hold all of it. This data is held in array form and can best be processed on supercomputers which often consist of a network of individual computers doing their computation in parallel. One major challenge for this sort of programming is that operations on arrays on multiple computers is very complex and an interface is needed so that these arrays seem like they are on a single computer. This is what global arrays does. The work done here is to use more efficient operations on that data that requires less copying of data to be completed. This saves a lot of time because copying data on many different computers is time intensive. The way this challenge was solved is when data to be operated on with binary operations are on the same computer, they are not copied when they are accessed. When they are on separate computers, only one set is copied when accessed. This saves time because of less copying done although more data access operations were done.« less

Plant operation planning and scheduling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jammar, R.J.

When properly designed, planning and scheduling can actually add millions of dollars per year to the bottom line. Planning and scheduling is a continuum of decisions starting with crude selection and ending with establishing short-term targets for crude processing and blending. It also includes maintaining optimization and operation simulation models. It is thought that conservatively, a refinery may save from $5 million to $10 million a year if it pays more attention to the processes behind proper planning and scheduling. Of course, the amount of savings can reach staggering proportions for companies now at the bottom of the Solomon Associatesmore » Inc. refinery performance ranking.« less

Insurers’ Negotiating Leverage and the External Effects of Medicare Part D*

PubMed Central

Lakdawalla, Darius; Yin, Wesley

2014-01-01

By influencing the size and bargaining power of private insurers, public subsidization of private health insurance may project effects beyond the subsidized population. We test for such spillovers by analyzing how increases in insurer size resulting from the implementation of Medicare Part D affected drug prices negotiated in the non-Medicare commercial market. On average, Part D lowered prices for commercial enrollees by 3.7%. The external commercial market savings amount to $1.5 billion per year, which, if passed to consumers, approximates the internal cost-savings of newly-insured subsidized beneficiaries. If retained by insurers, it corresponds to a 5% average increase in profitability. PMID:25937676

Cost-effective control of nitrogen loadings in Long Island Sound

NASA Astrophysics Data System (ADS)

Bennett, Lynne L.; Thorpe, Steven G.; Guse, A. Joseph

2000-12-01

Long Island Sound is plagued by conditions of severe hypoxia (low levels of dissolved oxygen) during the summer months because of the existence of excessive amounts of nitrogen. A new proposal that would allow sewage treatment plants to buy or sell nitrogen discharge credits is currently being evaluated by the states of Connecticut and New York. Existing theory suggests that a trading program for nitrogen emissions would be a cost-effective means of addressing the problem. We estimate the costs associated with several trading scenarios and find that the potential for cost savings is substantial and that cost savings rise as the scope of trading expands.

Standby Conservation Plan No. 3: Emergency advertising lighting restrictions. Economic analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This report analyzes the potential economic impacts of the Emergency Advertising Lighting Restrictions Plan. The on-premise signs located within the confines of a business and off-premise located outside the confines of a business are affected. Illuminated signs essential to direct customers to an open business by identifying it and/or to inform customers of a product or service supplied by the open business are not restricted. The economic impact of implementing this plan is evaluated by first estimating the amount of petroleum saved by the lighting restrictions and to evaluate the economic impacts that would result. The amount of oil thatmore » could be diverted to other uses by implementation of this plan is estimated in Chapter 2, and amounts to about 4,000 barrels per day (the period analyzed is the fourth quarter of 1980 through the third quarter of 1981). Redistribution of petroleum saved by this measure is expected to result in small increases in GNP, personal consumption, and employment. The effects on inflation are negligible. Economic impacts for the businesses are evaluated in Chapter 3. Costs of implementing the measure are estimated to be about $3.1 million, including the cost of reimbursing the states for functions delegated to them. (MCW)« less

Water Use by Urban Landscapes in Semi-Arid Environments

NASA Astrophysics Data System (ADS)

Litvak, E.; Pataki, D. E.

2017-12-01

Water use by urban trees and lawns constitutes a significant yet uncertain portion of urban water budgets. Reducing this uncertainty is essential for developing effective water conservation strategies that are critically needed in dry regions. Landscape water use is particularly difficult to estimate in semi-arid cities with diverse plant compositions and large proportions of non-native species sustained by irrigation. We developed an empirical model of urban evapotranspiration based on in situ measurements of 11 lawns and 108 trees that we previously collected in the greater Los Angeles area. The model in its current state considers urban landscapes as two-component systems comprised of lawns and trees, which have contrasting patterns of water use. Turfgrass lawns consume large amounts of irrigation water (up to 10 mm/d) that may be effectively reduced by the shade from trees. Trees consume much smaller amounts of water at common urban planting densities (0.1-2.6 mm/d), and provide shade over lawns. We estimated water use by irrigated landscapes in Los Angeles by combining this model with remotely sensed estimates of vegetation cover and ground-based vegetation surveys and weather data. According to our estimates, water use by Los Angeles landscapes was close to potential evapotranspiration ( 1,100 mm/yr), with turfgrass responsible for 64-84% of total water use. Landscape water use linearly increased with median household income across Los Angeles, where wealthier parts of the city were consistently more vegetated than less affluent parts. Our results indicate extremely high water use by urban landscapes in semi-arid environments, largely owing to high spatial coverage of excessively irrigated lawns. These results have important implications for constraining municipal water budgets and developing water-saving landscaping practices.

Industrial application of green chromatography - II. Separation and analysis of preservatives in skincare products using subcritical water chromatography.

PubMed

Yang, Y; Kapalavavi, B; Gujjar, L; Hadrous, S; Marple, R; Gamsky, C

2012-10-01

Several high-temperature liquid chromatography (HTLC) and subcritical water chromatography (SBWC) methods have been successfully developed in this study for separation and analysis of preservatives contained in Olay skincare creams. Efficient separation and quantitative analysis of preservatives have been achieved on four commercially available ZirChrom and Waters XBridge columns at temperatures ranging from 100 to 200°C. The quantification results obtained by both HTLC and SBWC methods developed for preservatives analysis are accurate and reproducible. A large number of replicate HTLC and SBWC runs also indicate no significant system building-up or interference for skincare cream analysis. Compared with traditional HPLC separation carried out at ambient temperature, the HTLC methods can save up to 90% methanol required in the HPLC mobile phase. However, the SBWC methods developed in this project completely eliminated the use of toxic organic solvents required in the HPLC mobile phase, thus saving a significant amount of money and making the environment greener. Although both homemade and commercial systems can accomplish SBWC separations, the SBWC methods using the commercial system for preservative analysis are recommended for industrial applications because they can be directly applied in industrial plant settings. © 2012 The Authors ICS © 2012 Society of Cosmetic Scientists and the Société Française de Cosmétologie.

Task-focused modeling in automated agriculture

NASA Astrophysics Data System (ADS)

Vriesenga, Mark R.; Peleg, K.; Sklansky, Jack

1993-01-01

Machine vision systems analyze image data to carry out automation tasks. Our interest is in machine vision systems that rely on models to achieve their designed task. When the model is interrogated from an a priori menu of questions, the model need not be complete. Instead, the machine vision system can use a partial model that contains a large amount of information in regions of interest and less information elsewhere. We propose an adaptive modeling scheme for machine vision, called task-focused modeling, which constructs a model having just sufficient detail to carry out the specified task. The model is detailed in regions of interest to the task and is less detailed elsewhere. This focusing effect saves time and reduces the computational effort expended by the machine vision system. We illustrate task-focused modeling by an example involving real-time micropropagation of plants in automated agriculture.

Simultaneous personnel and vehicle shift scheduling in the waste management sector.

PubMed

Ghiani, Gianpaolo; Guerriero, Emanuela; Manni, Andrea; Manni, Emanuele; Potenza, Agostino

2013-07-01

Urban waste management is becoming an increasingly complex task, absorbing a huge amount of resources, and having a major environmental impact. The design of a waste management system consists in various activities, and one of these is related to the definition of shift schedules for both personnel and vehicles. This activity has a great incidence on the tactical and operational cost for companies. In this paper, we propose an integer programming model to find an optimal solution to the integrated problem. The aim is to determine optimal schedules at minimum cost. Moreover, we design a fast and effective heuristic to face large-size problems. Both approaches are tested on data from a real-world case in Southern Italy and compared to the current practice utilized by the company managing the service, showing that simultaneously solving these problems can lead to significant monetary savings. Copyright © 2013 Elsevier Ltd. All rights reserved.

REUSABLE PROPULSION ARCHITECTURE FOR SUSTAINABLE LOW-COST ACCESS TO SPACE

NASA Technical Reports Server (NTRS)

Bonometti, J. A.; Dankanich, J. W.; Frame, K. L.

2005-01-01

The primary obstacle to any space-based mission is, and has always been, the cost of access to space. Even with impressive efforts toward reusability, no system has come close to lowering the cost a significant amount. It is postulated here, that architectural innovation is necessary to make reusability feasible, not incremental subsystem changes. This paper shows two architectural approaches of reusability that merit further study investments. Both #inherently# have performance increases and cost advantages to make affordable access to space a near term reality. A rocket launched from a subsonic aircraft (specifically the Crossbow methodology) and a momentum exchange tether, reboosted by electrodynamics, offer possibilities of substantial reductions in the total transportation architecture mass - making access-to-space cost-effective. They also offer intangible benefits that reduce risk or offer large growth potential. The cost analysis indicates that approximately a 50% savings is obtained using today#s aerospace materials and practices.

Tips and tricks for using the internet for professional purposes.

PubMed

Ceylan, Hasan Huseyin; Güngören, Nurdan; Küçükdurmaz, Fatih

2017-05-01

Online resources provide access to large amounts of information which is expanding every day. Using search engines for reaching the relevant, updated and complete literature that is indexed in various bibliographical databases has already become part of the medical professionals' everyday life.However, most researchers often fail to conduct a efficient literature search on the internet. The right techniques in literature search save time and improve the quality of the retrieved data.Efficient literature search is not a talent but a learnable skill, which should be a formal part of medical education.This review briefly outlines the commonly used bibliographic databases, namely Pubmed, Cochrane Library, Web of Science, Scopus, EMBASE, CINAHL and Google Scholar. Also the definition of grey literature and its features are summarised. Cite this article: EFORT Open Rev 2017;2. DOI: 10.1302/2058-5241.2.160066. Originally published online at www.efortopenreviews.org.

Automated indexing for making of a newspaper article database

NASA Astrophysics Data System (ADS)

Kamio, Tatsuo

Automated indexing has been widely employed in the process of making newspaper article databases. It is essential to speed up the compiling time of the said databases for the large amount of articles come out daily, and save manpower involved in it, with the aid of computers. However, indexed terms which are extracted by the current automated indexing systems have no links with subject analysis, so that they are not considered to be keywords in a strict sense. Thus, the system of Nihon Keizai Shimbun KK enables to justify keywords to certain extent based on the two clues ; 1) at which location the extracted term occurred, and 2) whether or not subject area of the article corresponds to thesaurus class of the extracted term, by using characteristics peculiar to newspaper articles. Also the experiment of assigning keywords which are not occurred in articles was conducted. The fairly good result was obtained.

Influence analysis of Github repositories.

PubMed

Hu, Yan; Zhang, Jun; Bai, Xiaomei; Yu, Shuo; Yang, Zhuo

2016-01-01

With the support of cloud computing techniques, social coding platforms have changed the style of software development. Github is now the most popular social coding platform and project hosting service. Software developers of various levels keep entering Github, and use Github to save their public and private software projects. The large amounts of software developers and software repositories on Github are posing new challenges to the world of software engineering. This paper tries to tackle one of the important problems: analyzing the importance and influence of Github repositories. We proposed a HITS based influence analysis on graphs that represent the star relationship between Github users and repositories. A weighted version of HITS is applied to the overall star graph, and generates a different set of top influential repositories other than the results from standard version of HITS algorithm. We also conduct the influential analysis on per-month star graph, and study the monthly influence ranking of top repositories.

Semi-supervised Learning for Phenotyping Tasks.

PubMed

Dligach, Dmitriy; Miller, Timothy; Savova, Guergana K

2015-01-01

Supervised learning is the dominant approach to automatic electronic health records-based phenotyping, but it is expensive due to the cost of manual chart review. Semi-supervised learning takes advantage of both scarce labeled and plentiful unlabeled data. In this work, we study a family of semi-supervised learning algorithms based on Expectation Maximization (EM) in the context of several phenotyping tasks. We first experiment with the basic EM algorithm. When the modeling assumptions are violated, basic EM leads to inaccurate parameter estimation. Augmented EM attenuates this shortcoming by introducing a weighting factor that downweights the unlabeled data. Cross-validation does not always lead to the best setting of the weighting factor and other heuristic methods may be preferred. We show that accurate phenotyping models can be trained with only a few hundred labeled (and a large number of unlabeled) examples, potentially providing substantial savings in the amount of the required manual chart review.

Tips and tricks for using the internet for professional purposes

PubMed Central

Ceylan, Hasan Huseyin; Güngören, Nurdan; Küçükdurmaz, Fatih

2017-01-01

Online resources provide access to large amounts of information which is expanding every day. Using search engines for reaching the relevant, updated and complete literature that is indexed in various bibliographical databases has already become part of the medical professionals’ everyday life. However, most researchers often fail to conduct a efficient literature search on the internet. The right techniques in literature search save time and improve the quality of the retrieved data. Efficient literature search is not a talent but a learnable skill, which should be a formal part of medical education. This review briefly outlines the commonly used bibliographic databases, namely Pubmed, Cochrane Library, Web of Science, Scopus, EMBASE, CINAHL and Google Scholar. Also the definition of grey literature and its features are summarised. Cite this article: EFORT Open Rev 2017;2. DOI: 10.1302/2058-5241.2.160066. Originally published online at www.efortopenreviews.org PMID:28630750

Microscale Organic Lab Course Has Many Assets.

ERIC Educational Resources Information Center

Rawls, Rebecca

1984-01-01

Describes a microscale laboratory course in which students perform many classic organic reactions using only one-hundredth to one-thousandth the amount of starting material usual in student experiments. Reduction of toxic chemicals concentration in laboratory air and savings in chemical costs and experimental time are benefits of the novel course.…

Decentralized School vs. Centralized School. Investigation No. 3.

ERIC Educational Resources Information Center

Paseur, C. Herbert

A report is presented of a comparative investigation of a decentralized and a centralized school facility. Comparative data are provided regarding costs of the facilities, amount of educational area provided by the facilities, and types of educational areas provided. Evaluative comments are included regarding cost savings versus educational…

12 CFR 209.4 - Amounts and payments.

Code of Federal Regulations, 2010 CFR

2010-01-01

... number of shares required to be canceled and shall pay therefor a sum equal to the cash subscription paid... subscription. The total subscription of a member bank (other than a mutual savings bank) shall equal six... Reserve Bank capital stock subscription to equal six percent of the member bank's capital and surplus...

12 CFR 3.173 - Disclosures by certain advanced approaches national banks or Federal savings associations.

Code of Federal Regulations, 2014 CFR

2014-01-01

... funds or total capital within the group. Quantitative disclosures (d) The aggregate amount of surplus... and conditions of the main features of all regulatory capital instruments. Quantitative disclosures (b... capital to support current and future activities. Quantitative disclosures (b) Risk-weighted assets for...

12 CFR 567.5 - Components of capital.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Requirements § 567.5 Components of capital. (a) Core Capital. (1) The following elements, 3 less the amount of any deductions pursuant to paragraph (a)(2) of this section, comprise a savings association' s core... includable in core capital. (iii) Minority interests in the equity accounts of the subsidiaries that are...

Hawaii Schools See Green

ERIC Educational Resources Information Center

Jacobson, Linda

2008-01-01

This article discusses Hawaii's energy conservation efforts. Faced with high electricity costs, the Hawaii Department of Education instituted a pilot program in which schools could earn back half the amount they saved in electricity over the course of a semester. As a result, one school's electricity use decreased by more than 10% for the…

Listen! Native Radio Can Save Languages.

ERIC Educational Resources Information Center

Martin, Kallen

1996-01-01

In the United States and Canada, the number of radio stations operated by Native Americans has greatly increased in recent years, as have the amount of programming in native languages and the number of native language instructional programs. Such programming can play a role in maintaining vigorous native languages and revitalizing endangered…

5 CFR 1653.4 - Calculating entitlements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... PROCESSES AFFECTING THRIFT SAVINGS PLAN ACCOUNTS Retirement Benefits Court Orders § 1653.4 Calculating... purchased as of the effective date; and (iii) Multiplying the price per share as of the payment date by the... estimate the amount of a payee's entitlement when it prepares the court order decision letter and will...

Oral health promotion: the economic benefits to the NHS of increased use of sugarfree gum in the UK.

PubMed

Claxton, L; Taylor, M; Kay, E

2016-02-12

The effect of sugarfree gum (SFG) on the prevention of dental caries has been established for some time. With increased constraints placed on healthcare budgets, the importance of economic considerations in decision-making about oral health interventions has increased. The aim of this study was to demonstrate the potential cost savings in dental care associated with increased levels of SFG usage. The analysis examined the amount of money which would hypothetically be saved if the UK 12-year-old population chewed more SFG. The number of sticks chewed per year and the caries risk reduction were modelled to create a dose response curve. The costs of tooth restoration, tooth extraction in primary care settings and under general anaesthetic were considered, and the effects of caries reduction on these costs calculated. If all members of the UK 12-year-old population chewed SFG frequently (twice a day), the potential cost savings for the cohort over the course of one year were estimated to range from £1.2 to £3.3 million and if they chewed three times a day, £8.2 million could be saved each year. Sensitivity analyses of the key parameters demonstrated that cost savings would still be likely to be observed even in scenarios with less significant increases in SFG use. This study shows that if levels of SFG usage in the teenage population in the UK could be increased, substantial cost savings might be achieved.

Analysis of optimal design of low temperature economizer

NASA Astrophysics Data System (ADS)

Song, J. H.; Wang, S.

2017-11-01

This paper has studied the Off-design characteristic of low temperature economizer system based on thermodynamics analysis. Based on the data from one 1000 MW coal-fired unit, two modes of operation are contrasted and analyzed. One is to fix exhaust gas temperature and the other one is to take into account both of the average temperature difference and the exhaust gas temperature. Meanwhile, the cause of energy saving effect change is explored. Result shows that: in mode 1, the amount of decrease in coal consumption reduces from 1.11 g/kWh (under full load) to 0.54 g/kWh (under half load), and in mode 2, when the load decreases from 90% to 50%, the decrease in coal consumption reduces from 1.29 g/kWh to 0.84 g/kWh. From the result, under high load, the energy saving effect is superior, and under lower work load, energy saving effect declines rapidly when load is reduced. When load changes, the temperature difference of heat transfer, gas flow, the flue gas heat rejection and the waste heat recovery change. The energy saving effect corresponding changes result in that the energy saving effect under high load is superior and more stable. However, rational adjustment to the temperature of outlet gas can alleviate the decline of the energy saving effect under low load. The result provides theoretical analysis data for the optimal design and operation of low temperature economizer system of power plant.

OpenStudio: A Platform for Ex Ante Incentive Programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roth, Amir; Brackney, Larry; Parker, Andrew

Many utilities operate programs that provide ex ante (up front) incentives for building energy conservation measures (ECMs). A typical incentive program covers two kinds of ECMs. ECMs that deliver similar savings in different contexts are associated with pre-calculated 'deemed' savings values. ECMs that deliver different savings in different contexts are evaluated on a 'custom' per-project basis. Incentive programs often operate at less than peak efficiency because both deemed ECMs and custom projects have lengthy and effort-intensive review processes--deemed ECMs to gain confidence that they are sufficiently context insensitive, custom projects to ensure that savings are claimed appropriately. DOE's OpenStudio platformmore » can be used to automate ex ante processes and help utilities operate programs more efficiently, consistently, and transparently, resulting in greater project throughput and energy savings. A key concept of the platform is the OpenStudio Measure, a script that queries and transforms building energy models. Measures can be simple or surgical, e.g., applying different transformations based on space-type, orientation, etc. Measures represent ECMs explicitly and are easier to review than ECMs that are represented implicitly as the difference between a with-ECM and without-ECM models. Measures can be automatically applied to large numbers of prototype models--and instantiated from uncertainty distributions--facilitating the large scale analysis required to develop deemed savings values. For custom projects, Measures can also be used to calibrate existing building models, to automatically create code baseline models, and to perform quality assurance screening.« less

Greenhouse gas emissions of an agro-biogas energy system: Estimation under the Renewable Energy Directive.

PubMed

Rana, Roberto; Ingrao, Carlo; Lombardi, Mariarosaria; Tricase, Caterina

2016-04-15

Agro-biogas from energy crops and by-products is a renewable energy carrier that can potentially contribute to climate change mitigation. In this context, application of the methodology defined by the Renewable Energy Directive 2009/28/EC (RED) was performed in order to estimate the 100-year Global Warming Potential (GWP100) associated with an agro-biogas supply chain (SC) in Southern Italy. Doing so enabled calculation of Greenhouse Gas (GHG) emission saving in order to verify if it is at least equal to 35% compared to the fossil fuel reference system, as specified by the RED. For the assessment, an attributional Life Cycle Assessment (LCA) approach (International Organization for Standardization (ISO), 2006a,b) was integrated with the RED methodology applied following the guidelines reported in COM(2010)11 and updated by SWD(2014)259 and Report EUR 27215 EN (2015). Moreover, primary data were collected with secondary data extrapolated from the Ecoinvent database system. Results showed that the GWP100 associated with electricity production through the biogas plant investigated was equal to 111.58gCO2eqMJe(-1) and so a 40.01% GHG-emission saving was recorded compared to the RED reference. The highest contribution comes from biomass production and, in particular, from crop cultivation due to production of ammonium nitrate in the overall amount used for crop cultivation. Based upon the findings of the study, the GHG saving calculated slightly exceeds the related minimum proposed by the RED: therefore, improvements are needed anyway. In particular, the authors documented that through replacement of ammonium nitrate with urea the GHG-emission saving would increase to almost 68%, thus largely satisfying the RED limit. In addition, the study highlighted that conservation practices, such as NT, can significantly enable reduction of the GHG-emissions coming from agricultural activities. Therefore, those practices should be increasingly adopted for cultivation of energy crops, because the latter significantly contribute to biogas production yield enhancement. Copyright © 2016 Elsevier B.V. All rights reserved.

A simple tool for estimating city-wide annual electrical energy savings from cooler surfaces

DOE PAGES

Pomerantz, Melvin; Rosado, Pablo J.; Levinson, Ronnen

2015-07-26

We present a simple method to estimate the maximum possible energy saving that might be achieved by increasing the albedo of surfaces in a large city. We restrict this to the "indirect effect", the cooling of outside air that lessens the demand for air conditioning (AC). Given the power demand of the electric utilities and data about the city, we can use a single linear equation to estimate the maximum saving. For example, the result for an albedo change of 0.2 of pavements in a typical warm city in California, such as Sacramento, is that the saving is less thanmore » about 2 kWh per m 2 per year. This may help decision makers choose which heat island mitigation techniques are economical from an energy-saving perspective.« less

After-hours Power Status of Office Equipment and Inventory of Miscellaneous Plug-load Equipment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roberson, Judy A.; Webber, Carrie A.; McWhinney, Marla C.

2004-01-22

This research was conducted in support of two branches of the EPA ENERGY STAR program, whose overall goal is to reduce, through voluntary market-based means, the amount of carbon dioxide emitted in the U.S. The primary objective was to collect data for the ENERGY STAR Office Equipment program on the after-hours power state of computers, monitors, printers, copiers, scanners, fax machines, and multi-function devices. We also collected data for the ENERGY STAR Commercial Buildings branch on the types and amounts of ''miscellaneous'' plug-load equipment, a significant and growing end use that is not usually accounted for by building energy managers.more » This data set is the first of its kind that we know of, and is an important first step in characterizing miscellaneous plug loads in commercial buildings. The main purpose of this study is to supplement and update previous data we collected on the extent to which electronic office equipment is turned off or automatically enters a low power state when not in active use. In addition, it provides data on numbers and types of office equipment, and helps identify trends in office equipment usage patterns. These data improve our estimates of typical unit energy consumption and savings for each equipment type, and enables the ENERGY STAR Office Equipment program to focus future effort on products with the highest energy savings potential. This study expands our previous sample of office buildings in California and Washington DC to include education and health care facilities, and buildings in other states. We report data from twelve commercial buildings in California, Georgia, and Pennsylvania: two health care buildings, two large offices (> 500 employees each), three medium offices (50-500 employees), four education buildings, and one ''small office'' that is actually an aggregate of five small businesses. Two buildings are in the San Francisco Bay area of California, five are in Pittsburgh, Pennsylvania, and five are in Atlanta, Georgia.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ludi-Herrera, Katlyn D.

Sandia National Laboratories (SNL) is working to conserve water through recycling. This report will focus on the water conservation that has been accumulated through the recycling of paper, ceiling tiles, compost, and plastic. It will be discussed the use of water in the process of manufacturing these materials and the amount of water that is used. The way that water is conserved will be reviewed. From the stand point of SNL it will be discussed the amount of material that has been accumulated from 2010 to the first two quarters of 2013 and how much water this material has saved.

Can digital pathology result in cost savings? A financial projection for digital pathology implementation at a large integrated health care organization.

PubMed

Ho, Jonhan; Ahlers, Stefan M; Stratman, Curtis; Aridor, Orly; Pantanowitz, Liron; Fine, Jeffrey L; Kuzmishin, John A; Montalto, Michael C; Parwani, Anil V

2014-01-01

Digital pathology offers potential improvements in workflow and interpretive accuracy. Although currently digital pathology is commonly used for research and education, its clinical use has been limited to niche applications such as frozen sections and remote second opinion consultations. This is mainly due to regulatory hurdles, but also to a dearth of data supporting a positive economic cost-benefit. Large scale adoption of digital pathology and the integration of digital slides into the routine anatomic/surgical pathology "slide less" clinical workflow will occur only if digital pathology will offer a quantifiable benefit, which could come in the form of more efficient and/or higher quality care. As a large academic-based health care organization expecting to adopt digital pathology for primary diagnosis upon its regulatory approval, our institution estimated potential operational cost savings offered by the implementation of an enterprise-wide digital pathology system (DPS). Projected cost savings were calculated for the first 5 years following implementation of a DPS based on operational data collected from the pathology department. Projected savings were based on two factors: (1) Productivity and lab consolidation savings; and (2) avoided treatment costs due to improvements in the accuracy of cancer diagnoses among nonsubspecialty pathologists. Detailed analyses of incremental treatment costs due to interpretive errors, resulting in either a false positive or false negative diagnosis, was performed for melanoma and breast cancer and extrapolated to 10 other common cancers. When phased in over 5-years, total cost savings based on anticipated improvements in pathology productivity and histology lab consolidation were estimated at $12.4 million for an institution with 219,000 annual accessions. The main contributing factors to these savings were gains in pathologist clinical full-time equivalent capacity impacted by improved pathologist productivity and workload distribution. Expanding the current localized specialty sign-out model to an enterprise-wide shared general/subspecialist sign-out model could potentially reduce costs of incorrect treatment by $5.4 million. These calculations were based on annual over and under treatment costs for breast cancer and melanoma estimated to be approximately $26,000 and $11,000/case, respectively, and extrapolated to $21,500/case for other cancer types. The projected 5-year total cost savings for our large academic-based health care organization upon fully implementing a DPS was approximately $18 million. If the costs of digital pathology acquisition and implementation do not exceed this value, the return on investment becomes attractive to hospital administrators. Furthermore, improved patient outcome enabled by this technology strengthens the argument supporting adoption of an enterprise-wide DPS.

Can Digital Pathology Result In Cost Savings? A Financial Projection For Digital Pathology Implementation At A Large Integrated Health Care Organization

PubMed Central

Ho, Jonhan; Ahlers, Stefan M.; Stratman, Curtis; Aridor, Orly; Pantanowitz, Liron; Fine, Jeffrey L.; Kuzmishin, John A.; Montalto, Michael C.; Parwani, Anil V.

2014-01-01

Background: Digital pathology offers potential improvements in workflow and interpretive accuracy. Although currently digital pathology is commonly used for research and education, its clinical use has been limited to niche applications such as frozen sections and remote second opinion consultations. This is mainly due to regulatory hurdles, but also to a dearth of data supporting a positive economic cost-benefit. Large scale adoption of digital pathology and the integration of digital slides into the routine anatomic/surgical pathology “slide less” clinical workflow will occur only if digital pathology will offer a quantifiable benefit, which could come in the form of more efficient and/or higher quality care. Aim: As a large academic-based health care organization expecting to adopt digital pathology for primary diagnosis upon its regulatory approval, our institution estimated potential operational cost savings offered by the implementation of an enterprise-wide digital pathology system (DPS). Methods: Projected cost savings were calculated for the first 5 years following implementation of a DPS based on operational data collected from the pathology department. Projected savings were based on two factors: (1) Productivity and lab consolidation savings; and (2) avoided treatment costs due to improvements in the accuracy of cancer diagnoses among nonsubspecialty pathologists. Detailed analyses of incremental treatment costs due to interpretive errors, resulting in either a false positive or false negative diagnosis, was performed for melanoma and breast cancer and extrapolated to 10 other common cancers. Results: When phased in over 5-years, total cost savings based on anticipated improvements in pathology productivity and histology lab consolidation were estimated at $12.4 million for an institution with 219,000 annual accessions. The main contributing factors to these savings were gains in pathologist clinical full-time equivalent capacity impacted by improved pathologist productivity and workload distribution. Expanding the current localized specialty sign-out model to an enterprise-wide shared general/subspecialist sign-out model could potentially reduce costs of incorrect treatment by $5.4 million. These calculations were based on annual over and under treatment costs for breast cancer and melanoma estimated to be approximately $26,000 and $11,000/case, respectively, and extrapolated to $21,500/case for other cancer types. Conclusions: The projected 5-year total cost savings for our large academic-based health care organization upon fully implementing a DPS was approximately $18 million. If the costs of digital pathology acquisition and implementation do not exceed this value, the return on investment becomes attractive to hospital administrators. Furthermore, improved patient outcome enabled by this technology strengthens the argument supporting adoption of an enterprise-wide DPS. PMID:25250191

Wastewater recycling and heat reclamation project: Red Lion Central Laundry, Portland, Oregon

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garlick, T.F.; Halverson, M.A.; Ledbetter, M.R.

1997-06-01

This report discusses water, energy, and cost savings that can be achieved in a commercial laundry through the use of a wastewater recycling and heat recovery system. Cost savings are achieved through reductions in water use, reduction in sewage charges (typically based on water use), reductions in water heating energy, and potential reductions in water treatment chemicals because the recycled water has already been treated with soaps and conditioners. A recovery system saves water by recycling wash water that would normally be dumped into the city sewage system. Recycling the wash water produces considerable energy savings because the recycled watermore » has a higher temperature than fresh water. As a result, a hot water heater consumes less energy to heat the recycled water. The demonstration project discussed in this report was based in a large commercial laundry in Portland, Oregon. The laundry serves a large hotel/motel chain and processes an average of 25,000 pounds of laundry per day. A wastewater recovery system using a membrane microfiltration unit (MFU) was installed in the laundry in September 1995. Time series data of the water and energy consumption of the laundry were taken before and after installation of the MFU. Energy savings were measured by performing a thermal energy balance around the washing machines. Water savings were calculated by metering volumetric flow rates. After a period of approximately five months, the MFU has achieved final results of 52 percent savings in water consumption and 44 percent savings in energy to heat water. This five-month period represents a learning curve during which several small technical improvements were made to the MFU and laundry staff adjusted laundry operations to maximize the benefits of the MFU. An economic analysis discusses the impact of capital investment, daily consumption, and local utility rates on the payback period.« less

Restricting patients' medication supply to one month: saving or wasting money?

PubMed

Domino, Marisa Elena; Olinick, Joshua; Sleath, Betsy; Leinwand, Sharman; Byrns, Patricia J; Carey, Tim

2004-07-01

A state Medicaid program's pharmacy expenditures associated with dispensing one- and three-month supplies of drugs were examined. We simulated the effect of a policy change from a maximum of a 100-day supply of prescription medication to one where only a 34-day supply was allowed. All North Carolina prescription claims from Medicaid enrollees who filled a prescription for at least one of six medication categories during fiscal years 1999 and 2000 were included. The six categories were angiotensin-converting-enzyme inhibitors, antiulcers, antipsychotics, nonsteroidal antiinflammatory drugs, selective serotonin-reuptake inhibitors, and sulfonylureas. The dollar value of the medication wasted, the amount of medication wastage diverted after a change to a shorter prescription length, and the total costs incurred by the increases in prescription refills were calculated. For each therapeutic category, 255,000-783,000 prescription drug claims were analyzed. No valid drug claims were excluded for any reason. Although 5-14% of total drug wastage, attributed to switches of drug therapy, could be saved by dispensing a 34-day supply, this saving could not make up for a larger increase in dispensing costs, as consumers would fill prescriptions more often. In addition, reducing the amount of drug dispensed each time may be costly to consumers through increased transportation and other expenses. Simulated calculation showed that the cost of drug therapy to North Carolina's Medicaid program would probably increase if 34-day rather than 100-day supplies of medications are dispensed to patients.

Young people, money, and access to tobacco.

PubMed

Wong, Grace; Glover, Marewa; Nosa, Vili; Freeman, Becky; Paynter, Janine; Scragg, Robert

2007-12-14

The social and family processes involved in children's sources and use of money in relation to buying cigarettes are not well understood. Hence this study investigated how Maori, Pacific Island, European, and Asian school students access cigarettes, with a special focus on their disposable income. Students aged 11-15 years, recruited through schools, participated in 12 focus groups run by ethnically matched senior student facilitators and researchers. Topics discussed included sources of student money, parental monitoring of the use of money and student access to cigarettes. Students reported that young people can easily buy cigarettes from tobacco retailers. They could also be bought cheaply (50 cents for a roll-your-own) and/or on an "I owe you" basis from friends and social suppliers. Students used money from family, and money that was earned, "scabbed", and borrowed from friends. Cigarettes were also obtained freely from family members or from adults on the street. Whilst parents monitored students' use of large amounts of money, participants experienced relative freedom to spend small amounts which they saved out of money provided by parents for lunches and other purposes. Students were open to parental advice on how to use money but felt they should have the final say. Cigarettes continue to be accessible to children free or at affordable prices. Adults and family members must be discouraged from supplying cigarettes to children. Parents should be made aware of the way children use small amounts of money and advised to monitor, educate, and guide them to discourage cigarette purchase.

Cost Analysis of a Novel Enzymatic Debriding Agent for Management of Burn Wounds.

PubMed

Giudice, Giuseppe; Filoni, Angela; Maggio, Giulio; Bonamonte, Domenico; Vestita, Michelangelo

2017-01-01

Introduction . Given its efficacy and safety, NexoBrid™ (NXB) has become part of our therapeutic options in burns treatment with satisfactory results. However, no cost analysis comparing NXB to the standard of care (SOC) has been carried out as of today. Aim . To assess the cost of treatment with NXB and compare it to the SOC cost. Methods . 20 patients with 14-22% of TBSA with an intermediate-deep thermal burn related injury were retrospectively and consecutively included. 10 of these patients were treated with the SOC, while the other 10 with NXB. The cost analysis was performed in accordance with the weighted average Italian Health Ministry DRGs and with Conferenza Stato/Regioni 2003 and the study by Tan et al. For each cost, 95% confidence intervals have been evaluated. Results . Considering the 10 patients treated with NXB, the overall savings (total net saving) amounted to 53300 euros. The confidence interval analysis confirmed the savings. Discussion . As shown by our preliminary results, significant savings are obtained with the use of NXB. The limit of our study is that it is based on Italian health care costs and assesses a relative small cohort of patients. Further studies on larger multinational cohorts are warranted.

Window Treatment Phase I and Other Energy II Conservation Measures.

ERIC Educational Resources Information Center

Donohue, Philip E.

Six different energy-saving treatments for large window areas were tested by Tompkins-Cortland Community College (TCCC) to coordinate energy saving with building design. The TCCC building has an open space design with 33,000 square feet of external glass and other features causing heating problems and high energy costs. Phase I of the…

Cost Analysis of a High Support Housing Initiative for Persons with Severe Mental Illness and Long-Term Psychiatric Hospitalization.

PubMed

Rudoler, David; de Oliveira, Claire; Jacob, Binu; Hopkins, Melonie; Kurdyak, Paul

2018-01-01

The objective of this article was to conduct a cost analysis comparing the costs of a supportive housing intervention to inpatient care for clients with severe mental illness who were designated alternative-level care while inpatient at the Centre for Addiction and Mental Health in Toronto. The intervention, called the High Support Housing Initiative, was implemented in 2013 through a collaboration between 15 agencies in the Toronto area. The perspective of this cost analysis was that of the Ontario Ministry of Health and Long-Term Care. We compared the cost of inpatient mental health care to high-support housing. Cost data were derived from a variety of sources, including health administrative data, expenditures reported by housing providers, and document analysis. The High Support Housing Initiative was cost saving relative to inpatient care. The average cost savings per diem were between $140 and $160. This amounts to an annual cost savings of approximately $51,000 to $58,000. When tested through sensitivity analysis, the intervention remained cost saving in most scenarios; however, the result was highly sensitive to health system costs for clients of the High Support Housing Initiative program. This study suggests the High Support Housing Initiative is potentially cost saving relative to inpatient hospitalization at the Centre for Addiction and Mental Health.

Potential Energy Cost Savings from Increased Commercial Energy Code Compliance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosenberg, Michael I.; Hart, Philip R.; Athalye, Rahul A.

2016-08-22

An important question for commercial energy code compliance is: “How much energy cost savings can better compliance achieve?” This question is in sharp contrast to prior efforts that used a checklist of code requirements, each of which was graded pass or fail. Percent compliance for any given building was simply the percent of individual requirements that passed. A field investigation method is being developed that goes beyond the binary approach to determine how much energy cost savings is not realized. Prototype building simulations were used to estimate the energy cost impact of varying levels of non-compliance for newly constructed officemore » buildings in climate zone 4C. Field data collected from actual buildings on specific conditions relative to code requirements was then applied to the simulation results to find the potential lost energy savings for a single building or for a sample of buildings. This new methodology was tested on nine office buildings in climate zone 4C. The amount of additional energy cost savings they could have achieved had they complied fully with the 2012 International Energy Conservation Code is determined. This paper will present the results of the test, lessons learned, describe follow-on research that is needed to verify that the methodology is both accurate and practical, and discuss the benefits that might accrue if the method were widely adopted.« less

17 CFR 229.904 - (Item 904) Risk factors and other considerations.

Code of Federal Regulations, 2014 CFR

2014-04-01

...-up transaction on investors in each partnership, including, but not limited to: (1) The potential... difference(s). Instruction to Item 904. The requirement to quantify the effects of the roll-up transaction... partnerships is identified as a potential benefit of the roll-up transaction, the amount of cost savings and a...

17 CFR 229.904 - (Item 904) Risk factors and other considerations.

Code of Federal Regulations, 2012 CFR

2012-04-01

...-up transaction on investors in each partnership, including, but not limited to: (1) The potential... difference(s). Instruction to Item 904. The requirement to quantify the effects of the roll-up transaction... partnerships is identified as a potential benefit of the roll-up transaction, the amount of cost savings and a...

17 CFR 229.904 - (Item 904) Risk factors and other considerations.

Code of Federal Regulations, 2013 CFR

2013-04-01

...-up transaction on investors in each partnership, including, but not limited to: (1) The potential... difference(s). Instruction to Item 904. The requirement to quantify the effects of the roll-up transaction... partnerships is identified as a potential benefit of the roll-up transaction, the amount of cost savings and a...

12 CFR 567.6 - Risk-based capital credit risk-weight categories.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., but only if the originating bank remains liable to the customer or beneficiary for the full amount of... considered timely if they are not 30 days past due; (D) Qualifying residential construction loans as defined...) Indemnification of customers whose securities the savings association has lent as agent. If the customer is not...

26 CFR 1.166-6 - Sale of mortgaged or pledged property.

Code of Federal Regulations, 2010 CFR

2010-04-01

...-6 Sale of mortgaged or pledged property. (a) Deficiency deductible as bad debt—(1) Principal amount... been returned by him) as a bad debt for the taxable year in which it becomes wholly worthless or is... mortgaged or pledged property by certain mutual savings banks, domestic building and loan associations, and...

26 CFR 1.62-1T - Adjusted gross income (temporary).

Code of Federal Regulations, 2011 CFR

2011-04-01

..., cooperative bank or homestead association as a penalty for premature withdrawal of funds from a time savings... business expenses for meals and entertainment. If— (i) The facts and circumstances do not make clear— (A) That a reimbursement does not apply to business expenses for meals or entertainment, or (B) The amount...

16 CFR 502.100 - “Cents-off” representations.

Code of Federal Regulations, 2012 CFR

2012-01-01

... the retailer represents the savings in the amount of the “cents-off” the retailer's regular price, e.g... Package”; provided, the package or label may in addition bear in the usual pricing spot a form reflecting... deception or for frustration of value comparison, e.g., where the retailer charges a price which does not...

Mathematical models of water application for a variable rate irrigating hill-seeder

USDA-ARS?s Scientific Manuscript database

A variable rate irrigating hill-seeder can adjust water application automatically according to the difference in soil moisture content in the field to alleviate drought and save water. Two key problems to realize variable rate water application are how to determine the right amount of water for the ...

Mathematic models of water application for a variable rate irrigating hill-seeder

USDA-ARS?s Scientific Manuscript database

A variable rate irrigating hill-seeder can adjust water application automatically according to the difference in soil moisture content in the field to alleviate drought and save water. Two key problems to realize variable rate water application are how to determine the right amount of water for the ...

Visa Cards Save Thousands.

ERIC Educational Resources Information Center

Schafer, Eldon G.

A thorough review of Lane Community College's purchase order system revealed that 62% of all purchase orders processed in 1981-82 were for amounts under $100; that these orders made up only 3.5% of the dollars expended in acquiring materials and services for college operations; and that each purchase order cost the college $75 in supplies and…

40 CFR 80.5 - Penalties.

Code of Federal Regulations, 2010 CFR

2010-07-01

... violation for each and every day in the averaging period. Civil penalties shall be assessed in accordance... shall be liable to the United States for a civil penalty of not more than the sum of $25,000 for every day of such violation and the amount of economic benefit or savings resulting from the violation. Any...

Study of the Acquisition of Peripheral Equipment for Use with Automatic Data Processing Systems.

ERIC Educational Resources Information Center

Comptroller General of the U.S., Washington, DC.

The General Accounting Office (GAO) performed this study because: preliminary indications showed that significant savings could be achieved in the procurement of selected computer components; the Federal Government is investing increasing amounts of money in Automatic Data Processing (ADP) equipment; and there is a widespread congressional…

12 CFR 567.9 - Tangible capital requirement.

Code of Federal Regulations, 2010 CFR

2010-01-01

... capital, a savings association must deduct from assets, and, thus, from capital: (1) Intangible assets (as defined in § 567.1) except for mortgage servicing assets to the extent they are includable in tangible... maintain tangible capital in an amount equal to at least 1.5% of adjusted total assets. (b) The following...

12 CFR 8.2 - Semiannual assessment.

Code of Federal Regulations, 2013 CFR

2013-01-01

... over— Column A Column B Column C Column D Column E Million Million Million (dollars) (dollars) (dollars... into one of the asset-size brackets denoted by Columns A and B. A bank's or Federal savings association... the lower endpoint (Column A) of the bracket in which it falls. This base amount of the assessment is...

12 CFR 8.2 - Semiannual assessment.

Code of Federal Regulations, 2014 CFR

2014-01-01

... over— Column A Column B Column C Column D Column E Million Million Million (dollars) (dollars) (dollars... into one of the asset-size brackets denoted by Columns A and B. A bank's or Federal savings association... the lower endpoint (Column A) of the bracket in which it falls. This base amount of the assessment is...

12 CFR 8.2 - Semiannual assessment.

Code of Federal Regulations, 2012 CFR

2012-01-01

... over— Column A Column B Column C Column D Column E Million Million Million (dollars) (dollars) (dollars... into one of the asset-size brackets denoted by Columns A and B. A bank's or Federal savings association... the lower endpoint (Column A) of the bracket in which it falls. This base amount of the assessment is...

31 CFR 332.5 - Limitation on holdings.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., DEPARTMENT OF THE TREASURY BUREAU OF THE FISCAL SERVICE OFFERING OF UNITED STATES SAVINGS BONDS, SERIES H § 332.5 Limitation on holdings. The amount of Series H bonds, originally issued during any one calendar year, that could be held by any one person, at any one time, computed in accordance with the governing...

31 CFR 332.5 - Limitation on holdings.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT OFFERING OF UNITED STATES SAVINGS BONDS, SERIES H § 332.5 Limitation on holdings. The amount of Series H bonds, originally issued during any one calendar year, that could be held by any one person, at any one time, computed in accordance with the governing...

31 CFR 332.5 - Limitation on holdings.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT OFFERING OF UNITED STATES SAVINGS BONDS, SERIES H § 332.5 Limitation on holdings. The amount of Series H bonds, originally issued during any one calendar year, that could be held by any one person, at any one time, computed in accordance with the governing...

31 CFR 332.5 - Limitation on holdings.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT OFFERING OF UNITED STATES SAVINGS BONDS, SERIES H § 332.5 Limitation on holdings. The amount of Series H bonds, originally issued during any one calendar year, that could be held by any one person, at any one time, computed in accordance with the governing...

31 CFR 332.5 - Limitation on holdings.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT OFFERING OF UNITED STATES SAVINGS BONDS, SERIES H § 332.5 Limitation on holdings. The amount of Series H bonds, originally issued during any one calendar year, that could be held by any one person, at any one time, computed in accordance with the governing...

Establishment of a total liquid ventilation system using saline-based oxygen micro/nano-bubble dispersions in rats.

PubMed

Kakiuchi, Kenta; Matsuda, Kenichi; Harii, Norikazu; Sou, Keitaro; Aoki, Junko; Takeoka, Shinji

2015-09-01

Micro/nano-bubbles are practical nanomaterials designed to increase the gas content in liquids. We attempted to use oxygen micro/nano-bubble dispersions as an oxygen-rich liquid as a means for total liquid ventilation. To determine the oxygen content in the bubble dispersion, a new method based on a spectrophotometric change between oxy- and deoxy-hemoglobin was established. The oxygen micro/nano-bubble dispersion was supplied to an experimental total ventilation liquid in anesthetic rats. Though the amount of dissolving oxygen was as low as 6 mg/L in physiological saline, the oxygen content in the oxygen micro/nano-bubble dispersion was increased to 45 mg/L. The positive correlation between the oxygen content and the life-saving time under liquid ventilation clearly indicates that the life-saving time is prolonged by increasing the oxygen content in the oxygen micro/nano-bubble dispersion. This is the first report indicating that the oxygen micro/nano-bubbles containing a sufficient amount of oxygen are useful in producing oxygen-rich liquid for the process of liquid ventilation.

Assessing the changes of groundwater recharge / irrigation water use between SRI and traditional irrigation schemes in Central Taiwan

NASA Astrophysics Data System (ADS)

Chen, Shih-Kai; Jang, Cheng-Shin; Tsai, Cheng-Bin

2015-04-01

To respond to agricultural water shortage impacted by climate change without affecting rice yield in the future, the application of water-saving irrigation, such as SRI methodology, is considered to be adopted in rice-cultivation in Taiwan. However, the flooded paddy fields could be considered as an important source of groundwater recharge in Central Taiwan. The water-saving benefit of this new methodology and its impact on the reducing of groundwater recharge should be integrally assessed in this area. The objective of this study was to evaluate the changes of groundwater recharge/ irrigation water use between the SRI and traditional irrigation schemes (continuous irrigation, rotational irrigation). An experimental paddy field located in the proximal area of the Choushui River alluvial fan (the largest groundwater pumping region in Taiwan) was chosen as the study area. The 3-D finite element groundwater model (FEMWATER) with the variable boundary condition analog functions, was applied in simulating groundwater recharge process and amount under traditional irrigation schemes and SRI methodology. The use of effective rainfall was taken into account or not in different simulation scenarios for each irrigation scheme. The simulation results showed that there were no significant variations of infiltration rate in the use of effective rainfall or not, but the low soil moisture setting in deep soil layers resulted in higher infiltration rate. Taking the use of effective rainfall into account, the average infiltration rate for continuous irrigation, rotational irrigation, and SRI methodology in the first crop season of 2013 were 4.04 mm/day, 4.00 mm/day and 3.92 mm/day, respectively. The groundwater recharge amount of SRI methodology was slightly lower than those of traditional irrigation schemes, reducing 4% and 2% compared with continuous irrigation and rotational irrigation, respectively. The field irrigation requirement amount of SRI methodology was significantly lower than those of traditional irrigation schemes, saving 35% and 9% compared with continuous irrigation and rotational irrigation, respectively. The SRI methodology significantly improved water-saving benefit compared with the disadvantage of reducing groundwater recharge. The results could be used as a basis for the relevant government agency to formulate the integral water resource management strategies in this area. Keywords: SRI, Paddy field, Infiltration, Groundwater recharge

Integrating the Clearance in NPP Residual Material Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garcia-Bermejo, R.; Lamela, B.

Previous Experiences in decommissioning projects are being used to optimize the residual material management in NPP, metallic scrap usually. The approach is based in the availability of a materials Clearance MARSSIM-based methodology developed and licensed in Spain. A typical project includes the integration of segregation, decontamination, clearance, quality control and quality assurance activities. The design is based in the clearance methodology features translating them into standard operational procedures. In terms of ecological taxes and final disposal costs, significant amounts of money could be saved with this type of approaches. The last clearance project managed a total amount of 405 tonsmore » scrap metal and a similar amount of other residual materials occupying a volume of 1500 m{sup 3}. After less than a year of field works 251 tons were finally recycled in a non-licensed smelting facility. The balance was disposed as LILW. In the planning phase the estimated cost savings were 4.5 Meuro. However, today a VLLW option is available in European countries so, the estimated cost savings are reduced to 1.2 Meuro. In conclusion: the application of materials clearance in NPP decommissioning lessons learnt to the NPP residual material management is an interesting management option. This practice is currently going on in Spanish NPP and, in a preliminary view, is consistent with the new MARSAME Draft. An interesting parameter is the cost of 1 m3 of recyclable scrap. The above estimates are very project specific because in the segregation process other residual materials were involved. If the effect of this other materials is removed the estimated Unit Cost were in this project around 1700 euro/m{sup 3}, this figure is clearly below the above VLLW disposal cost of 2600 euro. In a future project it appears feasible to descend to 839 euro/m{sup 3} and if it became routine values and is used in big Decommissioning projects, around 600 euro/m{sup 3} or below possibly could be achieved. A rough economical analysis permits to estimate a saving around 2000 US$ to 13000 US$ per cubic meter of steel scrap according the variability of materials and disposal costs. Many learnt lessons of this practice were used as a feed back in the planning of characterization activities for decommissioning a Spanish NPP and today are considered as a significant reference in our Decommissioning engineering approaches.« less

Mental health and retirement savings: Confounding issues with compounding interest.

PubMed

Bogan, Vicki L; Fertig, Angela R

2018-02-01

The questionable ability of the U.S. pension system to provide for the growing elderly population combined with the rising number of people affected by depression and other mental health issues magnifies the need to understand how these household characteristics affect retirement. Mental health problems have a large and significant negative effect on retirement savings. Specifically, psychological distress is associated with decreasing the probability of holding retirement accounts by as much as 24 percentage points and decreasing retirement savings as a share of financial assets by as much as 67 percentage points. The magnitude of these effects underscores the importance of employer management policy and government regulation of these accounts to help ensure households have adequate retirement savings. Copyright © 2017 John Wiley & Sons, Ltd.

How much drinking water can be saved by using rainwater harvesting on a large urban area? application to Paris agglomeration.

PubMed

Belmeziti, Ali; Coutard, Olivier; de Gouvello, Bernard

2014-01-01

This paper is based on a prospective scenario of development of rainwater harvesting (RWH) on a given large urban area (such as metropolitan area or region). In such a perspective, a new method is proposed to quantify the related potential of potable water savings (PPWS) indicator on this type of area by adapting the reference model usually used on the building level. The method is based on four setting-up principles: gathering (definition of buildings-types and municipalities-types), progressing (use of an intermediate level), increasing (choice of an upper estimation) and prioritizing (ranking the stakes of RWH). Its application to the Paris agglomeration shows that is possible to save up to 11% of the total current potable water through the use of RWH. It also shows that the residential sector offers the most important part because it holds two-thirds of the agglomeration PPWS.

Characteristics of Patient-Centered Medical Home Initiatives that Generated Savings for Medicare: a Qualitative Multi-Case Analysis.

PubMed

Burton, Rachel A; Lallemand, Nicole M; Peters, Rebecca A; Zuckerman, Stephen

2018-02-05

Through the Multi-Payer Advanced Primary Care Practice (MAPCP) Demonstration, Medicare, Medicaid, and private payers offered supplemental payments to 849 primary care practices that became patient-centered medical homes (PCMHs) in eight states; practices also received technical assistance and data reports. Average Medicare payments were capped at $10 per beneficiary per month in each state. Since there was variation in the eight participating states' demonstration designs, experiences, and outcomes, we conducted a qualitative multi-case analysis to identify the key factors that differentiated states that were estimated to have generated net savings for Medicare from states that did not. States' MAPCP Demonstration initiatives were comprehensively profiled in case studies based on secondary document review, three rounds of annual interviews with state staff, payers, practices, and other stakeholders, and other data sources. Case study findings were summarized in a case-ordered predictor-outcome matrix, which identified the presence or absence of key demonstration design features and experiences and arrayed states based on the amount of net savings or losses they generated for Medicare. We then used this matrix to identify initiative features that were present in at least three of the four states that generated net savings and absent from at least three of the four states that did not generate savings. A majority of the states that generated net savings: required practices to be recognized PCMHs to enter the demonstration, did not allow late entrants into the demonstration, used a consistent demonstration payment model across participating payers, and offered practices opportunities to earn performance bonuses. Practices in states that generated net savings also tended to report receiving the demonstration payments and bonuses they expected to receive, without any issues. Designers of future PCMH initiatives may increase their likelihood of generating net savings by incorporating the demonstration features we identified.

Cost effectiveness of recycling: A systems model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tonjes, David J., E-mail: david.tonjes@stonybrook.edu; Waste Reduction and Management Institute, School of Marine and Atmospheric Sciences, Stony Brook University, Stony Brook, NY 11794-5000; Center for Bioenergy Research and Development, Advanced Energy Research and Technology Center, Stony Brook University, 1000 Innovation Rd., Stony Brook, NY 11794-6044

Highlights: • Curbside collection of recyclables reduces overall system costs over a range of conditions. • When avoided costs for recyclables are large, even high collection costs are supported. • When avoided costs for recyclables are not great, there are reduced opportunities for savings. • For common waste compositions, maximizing curbside recyclables collection always saves money. - Abstract: Financial analytical models of waste management systems have often found that recycling costs exceed direct benefits, and in order to economically justify recycling activities, externalities such as household expenses or environmental impacts must be invoked. Certain more empirically based studies have alsomore » found that recycling is more expensive than disposal. Other work, both through models and surveys, have found differently. Here we present an empirical systems model, largely drawn from a suburban Long Island municipality. The model accounts for changes in distribution of effort as recycling tonnages displace disposal tonnages, and the seven different cases examined all show that curbside collection programs that manage up to between 31% and 37% of the waste stream should result in overall system savings. These savings accrue partially because of assumed cost differences in tip fees for recyclables and disposed wastes, and also because recycling can result in a more efficient, cost-effective collection program. These results imply that increases in recycling are justifiable due to cost-savings alone, not on more difficult to measure factors that may not impact program budgets.« less

Oral health promotion: the economic benefits to the NHS of increased use of sugarfree gum in the UK

PubMed Central

Claxton, L.; Taylor, M.; Kay, E.

2016-01-01

Introduction The effect of sugarfree gum (SFG) on the prevention of dental caries has been established for some time. With increased constraints placed on healthcare budgets, the importance of economic considerations in decision-making about oral health interventions has increased. The aim of this study was to demonstrate the potential cost savings in dental care associated with increased levels of SFG usage. Methods The analysis examined the amount of money which would hypothetically be saved if the UK 12-year-old population chewed more SFG. The number of sticks chewed per year and the caries risk reduction were modelled to create a dose response curve. The costs of tooth restoration, tooth extraction in primary care settings and under general anaesthetic were considered, and the effects of caries reduction on these costs calculated. Results If all members of the UK 12-year-old population chewed SFG frequently (twice a day), the potential cost savings for the cohort over the course of one year were estimated to range from £1.2 to £3.3 million and if they chewed three times a day, £8.2 million could be saved each year. Sensitivity analyses of the key parameters demonstrated that cost savings would still be likely to be observed even in scenarios with less significant increases in SFG use. Conclusion This study shows that if levels of SFG usage in the teenage population in the UK could be increased, substantial cost savings might be achieved. PMID:26868801

Financial Impact of Cancer Drug Wastage and Potential Cost Savings From Mitigation Strategies.

PubMed

Leung, Caitlyn Y W; Cheung, Matthew C; Charbonneau, Lauren F; Prica, Anca; Ng, Pamela; Chan, Kelvin K W

2017-07-01

Cancer drug wastage occurs when a parenteral drug within a fixed vial is not administered fully to a patient. This study investigated the extent of drug wastage, the financial impact on the hospital budget, and the cost savings associated with current mitigation strategies. We conducted a cross-sectional study in three University of Toronto-affiliated hospitals of various sizes. We recorded the actual amount of drug wasted over a 2-week period while using current mitigation strategies. Single-dose vial cancer drugs with the highest wastage potentials were identified (14 drugs). To calculate the hypothetical drug wastage with no mitigation strategies, we determined how many vials of drugs would be needed to fill a single prescription. The total drug costs over the 2 weeks ranged from $50,257 to $716,983 in the three institutions. With existing mitigation strategies, the actual drug wastage over the 2 weeks ranged from $928 to $5,472, which was approximately 1% to 2% of the total drug costs. In the hypothetical model with no mitigation strategies implemented, the projected drug cost wastage would have been $11,232 to $149,131, which accounted for 16% to 18% of the total drug costs. As a result, the potential annual savings while using current mitigation strategies range from 15% to 17%. The financial impact of drug wastage is substantial. Mitigation strategies lead to substantial cost savings, with the opportunity to reinvest those savings. More research is needed to determine the appropriate methods to minimize risk to patients while using the cost-saving mitigation strategies.

Operating room waste reduction in plastic and hand surgery.

PubMed

Albert, Mark G; Rothkopf, Douglas M

2015-01-01

Operating rooms (ORs), combined with labour and delivery suites, account for approximately 70% of hospital waste. Previous studies have reported that recycling can have a considerable financial impact on a hospital-wide basis; however, its importance in the OR has not been demonstrated. To propose a method of decreasing cost through judicious selection of instruments and supplies, and initiation of recycling in plastic and hand surgery. The authors identified disposable supplies and instruments that are routinely opened and wasted in common plastic and hand surgery procedures, and calculated the savings that can result from eliminating extraneous items. A cost analysis was performed, which compared the expense of OR waste versus single-stream recycling and the benefit of recycling HIPAA documents and blue wrap. Fifteen total items were removed from disposable plastic packs and seven total items from hand packs. A total of US$17,381.05 could be saved per year from these changes alone. Since initiating single-stream recycling, the authors' institution has saved, on average, US$3,487 per month at the three campuses. After extrapolating at the current savings rate, one would expect to save a minimum of US$41,844 per year. OR waste reduction is an effective method of decreasing cost in the surgical setting. By revising the contents of current disposable packs and instrument sets designated for plastic and hand surgery, hospitals can reduce the amount of opened and unused material. Significant financial savings and environmental benefit can result from this judicious supply and instrument selection, as well as implementation of recycling.

A comparison of efficiency of birth control input between China and India.

PubMed

Liang, J; Wang, H

1994-01-01

Global world population in mid-1991 would have been 6.9% higher (an additional 366 million births) without the effective birth control programs in India and China. 260 million births in China and 110 million births in India were averted. These averted births relieved population pressure on the food supply. Without birth control, output would have decreased by 20% in China to 302 kg in 1991 and by 12% in India to 189 kg in 1991. Both India and China have between 1000 and 2000 married and fertile women per birth control worker. The manpower-input efficiency is higher by 2 times in China than in India, but the gap is closing. In China, public expenses for birth control include family planning operating expenses, family planning workers, and bonuses for single child families. World Bank estimation has determined the ratio of government to grassroots investment to be 1:2. Total investment in 1980 was RMB 1.4596 billion or about $10.00 per person. In 1980 the allowance was RMB 60.00 per year per single child family, and in 1989 the allowance should have been RMB 120.00 per year per family but was actually RMB 48.00 due to local poverty areas and low economic performance. Data were provided annually between 1971 and 1991 on total revenue, grassroots revenue, bonuses, foreign aid, and expenses per person. The expenses per person increased from RMB 2.46 in 1971 to 5.23 in 1991 or US $6.53 in 1990. Investment in birth control totaled over 21 years RMB 50.10186 billion (US $16.6557 billion), which included RMB 49.9696 from China and $40 million in foreign aid. The cost of preventing 259.585 births over this period was RMB 193.01 or US $64.16 per birth. Savings would also accrue from child rearing costs. Government savings would have amounted to RMB 3,461 billion in rural and urban areas, or 2 times China's gross national product in 1988. State costs amount to 36.5% and family costs amount to 63.5% of child rearing until 16 years of age in urban areas; the proportion in rural areas would be 20.03% and 79.97%. The prevention of 260 million births would have saved RMB 932.1 billion for the state and collectives and RMB 2,528.9 billion for families. Over 21 years, savings were RMB 50.1 billion by the state and RMB 932.1 billion by collectives. The efficiency yield would be 1:18.60 and including family savings 1:69.08. The ratio was computed for shadow prices and with a discount factor. For India, the efficiency yield was 1:57.37.

Option pricing: a flexible tool to disseminate shared savings contracts.

PubMed

Friedberg, Mark W; Buendia, Anthony M; Lauderdale, Katherine E; Hussey, Peter S

2013-08-01

Due to volatility in healthcare costs, shared savings contracts can create systematic financial losses for payers, especially when contracting with smaller providers. To improve the business case for shared savings, we calculated the prices of financial options that payers can "sell" to providers to offset these losses. Using 2009 to 2010 member-level total cost of care data from a large commercial health plan, we calculated option prices by applying a bootstrap simulation procedure. We repeated these simulations for providers of sizes ranging from 500 to 60,000 patients and for shared savings contracts with and without key design features (minimum savings thresholds,bonus caps, cost outlier truncation, and downside risk) and under assumptions of zero, 1%, and 2% real cost reductions due to the shared savings contracts. Assuming no real cost reduction and a 50% shared savings rate, per patient option prices ranged from $225 (3.1% of overall costs) for 500-patient providers to $23 (0.3%) for 60,000-patient providers. Introducing minimum savings thresholds, bonus caps, cost outlier truncation, and downside risk reduced these option prices. Option prices were highly sensitive to the magnitude of real cost reductions. If shared savings contracts cause 2% reductions in total costs, option prices fall to zero for all but the smallest providers. Calculating the prices of financial options that protect payers and providers from downside risk can inject flexibility into shared savings contracts, extend such contracts to smaller providers, and clarify the tradeoffs between different contract designs, potentially speeding the dissemination of shared savings.

Review of the Fuel Saving, Life Cycle GHG Emission, and Ownership Cost Impacts of Lightweighting Vehicles with Different Powertrains.

PubMed

Luk, Jason M; Kim, Hyung Chul; De Kleine, Robert; Wallington, Timothy J; MacLean, Heather L

2017-08-01

The literature analyzing the fuel saving, life cycle greenhouse gas (GHG) emission, and ownership cost impacts of lightweighting vehicles with different powertrains is reviewed. Vehicles with lower powertrain efficiencies have higher fuel consumption. Thus, fuel savings from lightweighting internal combustion engine vehicles can be higher than those of hybrid electric and battery electric vehicles. However, the impact of fuel savings on life cycle costs and GHG emissions depends on fuel prices, fuel carbon intensities and fuel storage requirements. Battery electric vehicle fuel savings enable reduction of battery size without sacrificing driving range. This reduces the battery production cost and mass, the latter results in further fuel savings. The carbon intensity of electricity varies widely and is a major source of uncertainty when evaluating the benefits of fuel savings. Hybrid electric vehicles use gasoline more efficiently than internal combustion engine vehicles and do not require large plug-in batteries. Therefore, the benefits of lightweighting depend on the vehicle powertrain. We discuss the value proposition of the use of lightweight materials and alternative powertrains. Future assessments of the benefits of vehicle lightweighting should capture the unique characteristics of emerging vehicle powertrains.

Energy savings potential from improved building controls for the US commercial building sector

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fernandez, Nick; Katipamula, Srinivas; Wang, Weimin

The U.S. Department of Energy’s (DOE’s) Building Technologies Office (BTO) sponsored a study to determine the potential national savings achievable in the commercial building sector through widespread deployment of best practice controls, elimination of system and component faults, and use of better sensing. Detailed characterization of potential savings was one source of input to set research, development, and deployment (RD&D) goals in the field of building sensors and controls. DOE’s building energy simulation software, EnergyPlus, was employed to estimate the potential savings from 34 measures in 9 building types and across 16 climates representing almost 57% of commercial building sectormore » energy consumption. In addition to estimating savings from individual measures, three packages of measures were created to estimate savings from the packages. These packages represented an 1) efficient building, 2) typical building, and 3) inefficient building. To scale the results from individual measures or a package to the national scale, building weights by building type and climate locations from the Energy Information Administration’s 2012 Commercial Building Energy Consumption Survey (CBECS) were used. The results showed significant potential for energy savings across all building types and climates. The total site potential savings from individual measures by building type and climate location ranged between 0% and 25%. The total site potential savings by building type aggregated across all climates (using the CBECS building weights) for each measure varied between 0% and 16%. The total site potential savings aggregated across all building types and climates for each measure varied between 0% and 11%. Some individual measures had negative savings because correcting underlying operational problems (e.g., inadequate ventilation) resulted in increased energy consumption. When combined into packages, the overall national savings potential is estimated to be 29%; seven of the nine building types were in the range of 23 to 29% and two exceeded 40%. The total potential national site savings in for each building type ranged between 95x106 GJ (0.09 Quadrillion British thermal units [Quads]; Large Hotels) to 222x106 GJ (0.21 Quads; Large Office, Hospital Administrative areas, and College/University), resulting in total site savings of 1,393x106 GJ (1.32 Quads) when the three packages are applied to the U.S. commercial buildings stock. Using the source (or primary) energy conversion factors of 1.05 for natural gas and 3.14 for electricity resulted in an approximate potential primary energy savings of 2,912x106 GJ (2.76 Quads), which would be 15% of the sector’s 2015 use of approximately 18,991x106 GJ (18 Quads). Extrapolating the results for other building types not analyzed as part of this study, the primary energy savings could be in the range of 4,220x106 GJ to 5,275x106 GJ (4 to 5 Quads). If this savings potential is realized, it would be equivalent to not combusting 180 to 230 million tons of coal or reducing the energy impacts, at today’s energy intensities, of the per capita consumption of 12 to 15 million people in the U.S. To realize most of this potential savings, many gaps can be addressed through RD&D, as recommended in this paper.« less

[Psychiatric polypharmacy: hazard through drug-drug-interaction and possibilities for prevention].

PubMed

Hahn, M; Braus, D F

2012-09-01

Psychiatric diseases and comorbidity have increased over the past years. Commonly used psychotropic drugs contain a high risk of drug interactions and adverse drug events (ADE). With a frequency of 10-12% psychotropic drugs are, among all pharmaceuticals, the most common cause of hospitalisation due to ADE. During a hospital stay the application of psychotropic drugs can also lead to adverse drug events--sometimes due to drug interactions. Currently, ADEs and drug interactions are the most frequent cause of death for in-patients (18% of all causes of death) with an overall mortality of 0.95%. As studies have shown, hospitals as well as insurers could save a considerable amount of resources by implementing a system with on-ward pharmacists, hereby reducing ADE and re-hospitalisation rates. In recent studies a large amount of current ADEs were rated as preventable. Patient impairment due to ADE is leading to an increase in liability cases with an expected 5% increase of compensation payments in 2011. To evaluate these ADE-related cases, a pharmaceutical assessment should be included in the expert trials, especially since a lack of awareness of medication errors is prevalent. When aiming towards a successful drug therapy, physicians must also consider that cheaper substances may often have an unfavourable drug interaction profile.

Central Neuraxial Blockade-Assisted External Cephalic Version in Reducing Caesarean Section Rate: Systematic Review and Meta-Analysis

PubMed Central

Bolaji, Ibrahim; Alabi-Isama, Lillian

2009-01-01

We review the medical literature on the success, safety and economic value of central neuraxial blockade-assisted (CNB) external cephalic version from randomized controlled studies identified from 1951 to 2009. The result showed that more women had successful ECV with regional anaesthesia with corresponding reduction in caesarean section rate. They were 1.5 times more likely than women not receiving anaesthesia to have a successful ECV. The number to treat is six women needed to receive anaesthesia for 1 baby to be turned from breech to cephalic presentation. Feto-maternal morbidity was not increased in the CNB-aided group consisting of only transient bradycardia. Although the appropriate amount of force for safe version has not been quantified, there was no report of uterine rupture despite removal of these patients from “excessive force-pain biofeedback loop” induced through motor nerve blockade. We can attribute 30% of cost savings amounting to £42,150.00 directly to CNB using the most up to date Health Resource Group Code (HRG4). The initial results are encouraging but until the benefits and safety of CNB-aided ECV are substantiated by large randomized, blinded controlled trials, this practice cannot be universally recommended. PMID:20069044

Possibilities of heat energy recovery from greywater systems

NASA Astrophysics Data System (ADS)

Niewitecka, Kaja

2018-02-01

Waste water contains a large amount of heat energy which is irretrievably lost, so it is worth thinking about the possibilities of its recovery. It is estimated that in a residential building with full sanitary fittings, about 70% of the total tap water supplied is discharged as greywater and could be reused. The subject of the work is the opportunity to reuse waste water as an alternative source of heat for buildings. For this purpose, the design of heat exchangers used in the process of greywater heat recovery in indoor sewage systems, public buildings as well as in industrial plants has been reviewed. The possibility of recovering heat from waste water transported in outdoor sewage systems was also taken into consideration. An exemplary waste water heat recovery system was proposed, and the amount of heat that could be obtained using a greywater heat recovery system in a residential building was presented. The work shows that greywater heat recovery systems allow for significant savings in preheating hot tap water, and the rate of cost reimbursement depends on the purpose of the building and the type of installation. At the same time, the work shows that one should adjust the construction solutions of heat exchangers and indoor installations in buildings to the quality of the medium flowing, which is greywater.

Denitrifying capability and community dynamics of glycogen accumulating organisms during sludge granulation in an anaerobic-aerobic sequencing batch reactor

PubMed Central

Bin, Zhang; Bin, Xue; Zhigang, Qiu; Zhiqiang, Chen; Junwen, Li; Taishi, Gong; Wenci, Zou; Jingfeng, Wang

2015-01-01

Denitrifying capability of glycogen accumulating organisms (GAOs) has received great attention in environmental science and microbial ecology. Combining this ability with granule processes would be an interesting attempt. Here, a laboratory-scale sequencing batch reactor (SBR) was operated to enrich GAOs and enable sludge granulation. The results showed that the GAO granules were cultivated successfully and the granules had denitrifying capability. The batch experiments demonstrated that all NO3−-N could be removed or reduced, some amount of NO2−-N were accumulated in the reactor, and N2 was the main gaseous product. SEM analysis suggested that the granules were tightly packed with a large amount of tetrad-forming organisms (TFOs); filamentous bacteria served as the supporting structures for the granules. The microbial community structure of GAO granules was differed substantially from the inoculant conventional activated sludge. Most of the bacteria in the seed sludge grouped with members of Proteobacterium. FISH analysis confirmed that GAOs were the predominant members in the granules and were distributed evenly throughout the granular space. In contrast, PAOs were severely inhibited. Overall, cultivation of the GAO granules and utilizing their denitrifying capability can provide us with a new approach of nitrogen removal and saving more energy. PMID:26257096

Denitrifying capability and community dynamics of glycogen accumulating organisms during sludge granulation in an anaerobic-aerobic sequencing batch reactor.

PubMed

Bin, Zhang; Bin, Xue; Zhigang, Qiu; Zhiqiang, Chen; Junwen, Li; Taishi, Gong; Wenci, Zou; Jingfeng, Wang

2015-08-10

Denitrifying capability of glycogen accumulating organisms (GAOs) has received great attention in environmental science and microbial ecology. Combining this ability with granule processes would be an interesting attempt. Here, a laboratory-scale sequencing batch reactor (SBR) was operated to enrich GAOs and enable sludge granulation. The results showed that the GAO granules were cultivated successfully and the granules had denitrifying capability. The batch experiments demonstrated that all NO3(-)-N could be removed or reduced, some amount of NO2(-)-N were accumulated in the reactor, and N2 was the main gaseous product. SEM analysis suggested that the granules were tightly packed with a large amount of tetrad-forming organisms (TFOs); filamentous bacteria served as the supporting structures for the granules. The microbial community structure of GAO granules was differed substantially from the inoculant conventional activated sludge. Most of the bacteria in the seed sludge grouped with members of Proteobacterium. FISH analysis confirmed that GAOs were the predominant members in the granules and were distributed evenly throughout the granular space. In contrast, PAOs were severely inhibited. Overall, cultivation of the GAO granules and utilizing their denitrifying capability can provide us with a new approach of nitrogen removal and saving more energy.

Denitrifying capability and community dynamics of glycogen accumulating organisms during sludge granulation in an anaerobic-aerobic sequencing batch reactor

NASA Astrophysics Data System (ADS)

Bin, Zhang; Bin, Xue; Zhigang, Qiu; Zhiqiang, Chen; Junwen, Li; Taishi, Gong; Wenci, Zou; Jingfeng, Wang

2015-08-01

Denitrifying capability of glycogen accumulating organisms (GAOs) has received great attention in environmental science and microbial ecology. Combining this ability with granule processes would be an interesting attempt. Here, a laboratory-scale sequencing batch reactor (SBR) was operated to enrich GAOs and enable sludge granulation. The results showed that the GAO granules were cultivated successfully and the granules had denitrifying capability. The batch experiments demonstrated that all NO3--N could be removed or reduced, some amount of NO2--N were accumulated in the reactor, and N2 was the main gaseous product. SEM analysis suggested that the granules were tightly packed with a large amount of tetrad-forming organisms (TFOs); filamentous bacteria served as the supporting structures for the granules. The microbial community structure of GAO granules was differed substantially from the inoculant conventional activated sludge. Most of the bacteria in the seed sludge grouped with members of Proteobacterium. FISH analysis confirmed that GAOs were the predominant members in the granules and were distributed evenly throughout the granular space. In contrast, PAOs were severely inhibited. Overall, cultivation of the GAO granules and utilizing their denitrifying capability can provide us with a new approach of nitrogen removal and saving more energy.

An Analysis of the Cost and Performance of Photovoltaic Systems as a Function of Module Area

DOE Office of Scientific and Technical Information (OSTI.GOV)

Horowitz, Kelsey A.W.; Fu, Ran; Silverman, Tim

We investigate the potential effects of module area on the cost and performance of photovoltaic systems. Applying a bottom-up methodology, we analyzed the costs associated with mc-Si and thin-film modules and systems as a function of module area. We calculate a potential for savings of up to $0.04/W, $0.10/W, and $0.13/W in module manufacturing costs for mc-Si, CdTe, and CIGS respectively, with large area modules. We also find that an additional $0.05/W savings in balance-of-systems costs may be achieved. However, these savings are dependent on the ability to maintain efficiency and manufacturing yield as area scales. Lifetime energy yield mustmore » also be maintained to realize reductions in the levelized cost of energy. We explore the possible effects of module size on efficiency and energy production, and find that more research is required to understand these issues for each technology. Sensitivity of the $/W cost savings to module efficiency and manufacturing yield is presented. We also discuss non-cost barriers to adoption of large area modules.« less

Identification of cost effective energy conservation measures

NASA Technical Reports Server (NTRS)

Bierenbaum, H. S.; Boggs, W. H.

1978-01-01

In addition to a successful program of readily implemented conservation actions for reducing building energy consumption at Kennedy Space Center, recent detailed analyses have identified further substantial savings for buildings representative of technical facilities designed when energy costs were low. The techniques employed for determination of these energy savings consisted of facility configuration analysis, power and lighting measurements, detailed computer simulations and simulation verifications. Use of these methods resulted in identification of projected energy savings as large as $330,000 a year (approximately two year break-even period) in a single building. Application of these techniques to other commercial buildings is discussed

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Jie; Cui, Mingjian; Hodge, Bri-Mathias

The large variability and uncertainty in wind power generation present a concern to power system operators, especially given the increasing amounts of wind power being integrated into the electric power system. Large ramps, one of the biggest concerns, can significantly influence system economics and reliability. The Wind Forecast Improvement Project (WFIP) was to improve the accuracy of forecasts and to evaluate the economic benefits of these improvements to grid operators. This paper evaluates the ramp forecasting accuracy gained by improving the performance of short-term wind power forecasting. This study focuses on the WFIP southern study region, which encompasses most ofmore » the Electric Reliability Council of Texas (ERCOT) territory, to compare the experimental WFIP forecasts to the existing short-term wind power forecasts (used at ERCOT) at multiple spatial and temporal scales. The study employs four significant wind power ramping definitions according to the power change magnitude, direction, and duration. The optimized swinging door algorithm is adopted to extract ramp events from actual and forecasted wind power time series. The results show that the experimental WFIP forecasts improve the accuracy of the wind power ramp forecasting. This improvement can result in substantial costs savings and power system reliability enhancements.« less

Isosurface Extraction in Time-Varying Fields Using a Temporal Hierarchical Index Tree

NASA Technical Reports Server (NTRS)

Shen, Han-Wei; Gerald-Yamasaki, Michael (Technical Monitor)

1998-01-01

Many high-performance isosurface extraction algorithms have been proposed in the past several years as a result of intensive research efforts. When applying these algorithms to large-scale time-varying fields, the storage overhead incurred from storing the search index often becomes overwhelming. this paper proposes an algorithm for locating isosurface cells in time-varying fields. We devise a new data structure, called Temporal Hierarchical Index Tree, which utilizes the temporal coherence that exists in a time-varying field and adoptively coalesces the cells' extreme values over time; the resulting extreme values are then used to create the isosurface cell search index. For a typical time-varying scalar data set, not only does this temporal hierarchical index tree require much less storage space, but also the amount of I/O required to access the indices from the disk at different time steps is substantially reduced. We illustrate the utility and speed of our algorithm with data from several large-scale time-varying CID simulations. Our algorithm can achieve more than 80% of disk-space savings when compared with the existing techniques, while the isosurface extraction time is nearly optimal.

Automated Slide Scanning and Segmentation in Fluorescently-labeled Tissues Using a Widefield High-content Analysis System.

PubMed

Poon, Candice C; Ebacher, Vincent; Liu, Katherine; Yong, Voon Wee; Kelly, John James Patrick

2018-05-03

Automated slide scanning and segmentation of fluorescently-labeled tissues is the most efficient way to analyze whole slides or large tissue sections. Unfortunately, many researchers spend large amounts of time and resources developing and optimizing workflows that are only relevant to their own experiments. In this article, we describe a protocol that can be used by those with access to a widefield high-content analysis system (WHCAS) to image any slide-mounted tissue, with options for customization within pre-built modules found in the associated software. Not originally intended for slide scanning, the steps detailed in this article make it possible to acquire slide scanning images in the WHCAS which can be imported into the associated software. In this example, the automated segmentation of brain tumor slides is demonstrated, but the automated segmentation of any fluorescently-labeled nuclear or cytoplasmic marker is possible. Furthermore, there are a variety of other quantitative software modules including assays for protein localization/translocation, cellular proliferation/viability/apoptosis, and angiogenesis that can be run. This technique will save researchers time and effort and create an automated protocol for slide analysis.

Facile synthesis of concentrated gold nanoparticles with low size-distribution in water: temperature and pH controls

NASA Astrophysics Data System (ADS)

Li, Chunfang; Li, Dongxiang; Wan, Gangqiang; Xu, Jie; Hou, Wanguo

2011-07-01

The citrate reduction method for the synthesis of gold nanoparticles (GNPs) has known advantages but usually provides the products with low nanoparticle concentration and limits its application. Herein, we report a facile method to synthesize GNPs from concentrated chloroauric acid (2.5 mM) via adding sodium hydroxide and controlling the temperature. It was found that adding a proper amount of sodium hydroxide can produce uniform concentrated GNPs with low size distribution; otherwise, the largely distributed nanoparticles or instable colloids were obtained. The low reaction temperature is helpful to control the nanoparticle formation rate, and uniform GNPs can be obtained in presence of optimized NaOH concentrations. The pH values of the obtained uniform GNPs were found to be very near to neutral, and the pH influence on the particle size distribution may reveal the different formation mechanism of GNPs at high or low pH condition. Moreover, this modified synthesis method can save more than 90% energy in the heating step. Such environmental-friendly synthesis method for gold nanoparticles may have a great potential in large-scale manufacturing for commercial and industrial demand.

Self Righting Life Raft

NASA Technical Reports Server (NTRS)

1982-01-01

The Givens Buoy Raft was designed and manufactured for inventor Jim Givens of Givens Marine Survival Co. Inc., by RPR Industries, Inc. The Raft consists of a canopied topside and an underwater hemispheric ballast chamber. It has a heavy ballast stabilization system, adopted from NASA technology, which negates the capsizing problem. A "flapper valve" admits large amounts of water to the hemisphere chamber providing ballast to keep the center of gravity constant; stabilization system compensates for changes in wave angle and weight shifting of raft occupants. Mr. Givens has an exclusive patent license for use of the NASA technology. Produced in various sizes, capacities range from six to 20 persons. Raft is housed in a canister, available in several configurations. A pull on a line triggers the automatic inflation process, which takes 12 seconds. The raft has been credited with saving 230 lives in the last five years. It has found wide acceptance with operators of fishing boats, pleasure craft and other vessels. The Coast Guard is purchasing the rafts for use on its rescue helicopters and the Navy has a development program to adapt the system. The Coast Guard last year announced a proposed amendment of its regulations that would require large ballast chambers on inflatable life rafts.

Fuel savings potential of the NASA Advanced Turboprop Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whitlow, J.B. Jr.; Sievers, G.K.

1984-01-01

The NASA Advanced Turboprop (ATP) Program is directed at developing new technology for highly loaded, multibladed propellers for use at Mach 0.65 to 0.85 and at altitudes compatible with the air transport system requirements. Advanced turboprop engines offer the potential of 15 to 30 percent savings in aircraft block fuel relative to advanced turbofan engines (50 to 60 percent savings over today's turbofan fleet). The concept, propulsive efficiency gains, block fuel savings and other benefits, and the program objectives through a systems approach are described. Current program status and major accomplishments in both single rotation and counter rotation propeller technologymore » are addressed. The overall program from scale model wind tunnel tests to large scale flight tests on testbed aircraft is discussed.« less

40 CFR 80.1163 - What penalties apply under the RFS program?

Code of Federal Regulations, 2010 CFR

2010-07-01

..., for every day of each such violation and the amount of economic benefit or savings resulting from each... obligation, during any averaging period, is subject to a separate day of violation for each day in the..., a requirement of any provision of this subpart is liable for a separate day of violation for each...

Teaching Time Value of Money Using an Excel Retirement Model

ERIC Educational Resources Information Center

Arellano, Fernando; Mulig, Liz; Rhame, Susan

2012-01-01

The time value of money (TVM) is required knowledge for all business students. It is traditionally taught in finance and accounting classes for use in various applications in the business curriculum. These concepts are also very useful in real life situations such as calculating the amount to save for retirement. This paper details a retirement…

12 CFR 3.131 - Mechanics for calculating total wholesale and retail risk-weighted assets.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 1 2014-01-01 2014-01-01 false Mechanics for calculating total wholesale and...: (1) Phase 1—categorization of exposures; (2) Phase 2—assignment of wholesale obligors and exposures... amounts. (b) Phase 1—Categorization. The national bank or Federal savings association must determine which...

12 CFR 390.254 - How may a subsidiary of a State savings association issue securities?

Code of Federal Regulations, 2012 CFR

2012-01-01

... days that the notice presents supervisory concerns or raises significant issues of law or policy, you... made available to the subsidiary; the percentage that such amount represents of the current book value of your assets on an unconsolidated basis; and the current book value of all such assets of the...

12 CFR 390.254 - How may a subsidiary of a State savings association issue securities?

Code of Federal Regulations, 2013 CFR

2013-01-01

... days that the notice presents supervisory concerns or raises significant issues of law or policy, you... made available to the subsidiary; the percentage that such amount represents of the current book value of your assets on an unconsolidated basis; and the current book value of all such assets of the...

12 CFR 390.254 - How may a subsidiary of a State savings association issue securities?

Code of Federal Regulations, 2014 CFR

2014-01-01

... days that the notice presents supervisory concerns or raises significant issues of law or policy, you... made available to the subsidiary; the percentage that such amount represents of the current book value of your assets on an unconsolidated basis; and the current book value of all such assets of the...

31 CFR 363.6 - What special terms do I need to know to understand this part?

Code of Federal Regulations, 2011 CFR

2011-07-01

... bond. Legacy Treasury Direct® system is a non-Internet-based book-entry system maintained by Treasury... to purchase a payroll zero-percent certificate of indebtedness until a sufficient amount of payroll zero-percent certificate of indebtedness is accumulated to enable the purchase of a savings bond in an...

Hide and vanish: data sets where the most parsimonious tree is known but hard to find, and their implications for tree search methods.

PubMed

Goloboff, Pablo A

2014-10-01

Three different types of data sets, for which the uniquely most parsimonious tree can be known exactly but is hard to find with heuristic tree search methods, are studied. Tree searches are complicated more by the shape of the tree landscape (i.e. the distribution of homoplasy on different trees) than by the sheer abundance of homoplasy or character conflict. Data sets of Type 1 are those constructed by Radel et al. (2013). Data sets of Type 2 present a very rugged landscape, with narrow peaks and valleys, but relatively low amounts of homoplasy. For such a tree landscape, subjecting the trees to TBR and saving suboptimal trees produces much better results when the sequence of clipping for the tree branches is randomized instead of fixed. An unexpected finding for data sets of Types 1 and 2 is that starting a search from a random tree instead of a random addition sequence Wagner tree may increase the probability that the search finds the most parsimonious tree; a small artificial example where these probabilities can be calculated exactly is presented. Data sets of Type 3, the most difficult data sets studied here, comprise only congruent characters, and a single island with only one most parsimonious tree. Even if there is a single island, missing entries create a very flat landscape which is difficult to traverse with tree search algorithms because the number of equally parsimonious trees that need to be saved and swapped to effectively move around the plateaus is too large. Minor modifications of the parameters of tree drifting, ratchet, and sectorial searches allow travelling around these plateaus much more efficiently than saving and swapping large numbers of equally parsimonious trees with TBR. For these data sets, two new related criteria for selecting taxon addition sequences in Wagner trees (the "selected" and "informative" addition sequences) produce much better results than the standard random or closest addition sequences. These new methods for Wagner trees and for moving around plateaus can be useful when analyzing phylogenomic data sets formed by concatenation of genes with uneven taxon representation ("sparse" supermatrices), which are likely to present a tree landscape with extensive plateaus. Copyright © 2014 Elsevier Inc. All rights reserved.

The VLSI design of the sub-band filterbank in MP3 decoding

NASA Astrophysics Data System (ADS)

Liu, Jia-Xin; Luo, Li

2018-03-01

The sub-band filterbank is one of the most important modules which has the largest amount of calculation in MP3 decoding. In order to save CPU resources and integrate the sub-band filterbank part into MP3 IP core, the hardware circuit of the sub-band filterbank module is designed in this paper. A fast algorithm suit for hardware implementation is proposed and achieved on FPGA development board. The results show that the sub-band filterbank function is correct in the case of using very few registers and the amount of calculation and ROM resources are reduced greatly.

Lightning Mapping and Leader Propagation Reconstruction using LOFAR-LIM

NASA Astrophysics Data System (ADS)

Hare, B.; Ebert, U.; Rutjes, C.; Scholten, O.; Trinh, G. T. N.

2017-12-01

LOFAR (LOw Frequency ARray) is a radio telescope that consists of a large number of dual-polarized antennas spread over the northern Netherlands and beyond. The LOFAR for Lightning Imaging project (LOFAR-LIM) has successfully used LOFAR to map out lightning in the Netherlands. Since LOFAR covers a large frequency range (10-90 MHz), has antennas spread over a large area, and saves the raw trace data from the antennas, LOFAR-LIM can combine all the strongest aspects of both lightning mapping arrays and lightning interferometers. These aspects include a nanosecond resolution between pulses, nanosecond timing accuracy, and an ability to map lightning in all 3 spatial dimensions and time. LOFAR should be able to map out overhead lightning with a spatial accuracy on the order of meters. The large amount of complex data provide by LOFAR has presented new data processing challenges, such as handling the time offsets between stations with large baselines and locating as many sources as possible. New algorithms to handle these challenges have been developed and will be discussed. Since the antennas are dual-polarized, all three components of the electric field can be extracted and the structure of the R.F. pulses can be investigated at a large number of distances and angles relative to the lightning source, potentially allowing for modeling of lightning current distributions relevant to the 10 to 90 MHz frequency range. R.F. pulses due to leader propagation will be presented, which show a complex sub-structure, indicating intricate physics that could potentially be reconstructed.

The value of value-based insurance design: savings from eliminating drug co-payments.

PubMed

Maeng, Daniel D; Pitcavage, James M; Snyder, Susan R; Davis, Duane E

2016-02-01

To estimate the cost impact of a $0 co-pay prescription drug program implemented by a large healthcare employer as a part of its employee wellness program. A $0 co-pay program that included approximately 200 antihypertensive, antidiabetic, and antilipid medications was offered to Geisinger Health System (GHS) employees covered by Geisinger Health Plan (GHP) in 2007. Claims data from GHP for the years 2005 to 2011 were obtained. The sample was restricted to continuously enrolled members with Geisinger primary care providers throughout the study period. The intervention group, defined as 2251 GHS employees receiving any of the drugs eligible for $0 co-pay, was propensity score matched based on 2 years of pre-intervention claims data to a comparison group, which was defined as 3857 non-GHS employees receiving the same eligible drugs at the same time. Generalized linear models were used to estimate differences in terms of per-member-per-month (PMPM) claims amounts related to prescription drugs and medical care. Total healthcare spending (medical plus prescription drug spending) among the GHS employees was lower by $144 PMPM (13%; 95% CI, $38-$250) during the months when they were taking any of the eligible drugs. Considering the drug acquisition cost and the forgone co-pay, the estimated return on investment over a 5-year period was 1.8. This finding suggests that VBID implementation within the context of a wider employee wellness program targeting the appropriate population can potentially lead to positive cost savings.

Health and Economic Impacts of Eight Different Dietary Salt Reduction Interventions

PubMed Central

Nghiem, Nhung; Blakely, Tony; Cobiac, Linda J.; Pearson, Amber L.; Wilson, Nick

2015-01-01

Background Given the high importance of dietary sodium (salt) as a global disease risk factor, our objective was to compare the impact of eight sodium reduction interventions, including feasible and more theoretical ones, to assist prioritisation. Methods Epidemiological modelling and cost-utility analysis were performed using a Markov macro-simulation model. The setting was New Zealand (NZ) (2.3 million citizens, aged 35+ years) which has detailed individual-level administrative cost data. Results Of the most feasible interventions, the largest health gains were from (in descending order): (i) mandatory 25% reduction in sodium levels in all processed foods; (ii) the package of interventions performed in the United Kingdom (UK); (iii) mandatory 25% reduction in sodium levels in bread, processed meats and sauces; (iv) media campaign (as per a previous UK one); (v) voluntary food labelling as currently used in NZ; (vi) dietary counselling as currently used in NZ. Even larger health gains came from the more theoretical options of a “sinking lid” on the amount of food salt released to the national market to achieve an average adult intake of 2300 mg sodium/day (211,000 QALYs gained, 95% uncertainty interval: 170,000 – 255,000), and from a salt tax. All the interventions produced net cost savings (except counselling – albeit still cost-effective). Cost savings were especially large with the sinking lid (NZ$ 1.1 billion, US$ 0.7 billion). Also the salt tax would raise revenue (up to NZ$ 452 million/year). Health gain per person was greater for Māori (indigenous population) men and women compared to non-Māori. Conclusions This study substantially expands on the range of previously modelled salt reduction interventions and suggests that some of these might achieve major health gains and major cost savings (particularly the regulatory interventions). They could also reduce ethnic inequalities in health. PMID:25910259

Novel Binders and Methods for Agglomeration of Ore

DOE Office of Scientific and Technical Information (OSTI.GOV)

S. K. Kawatra; T. C. Eisele; K. A. Lewandowski

2006-09-30

Heap leaching is one of the methods being used to recover metal from low grade ore deposits. The main problem faced during heap leaching is the migration of fine grained particles through the heap, forming impermeable beds which result in poor solution flow. The poor solution flow leads to less contact between the leach solution and the ore, resulting in low recovery rates. Agglomeration of ore into coarse, porous masses prevents fine particles from migrating and clogging the spaces and channels between the larger ore particles. Currently, there is one facility in the United States which uses agglomeration. This operationmore » agglomerates their ore using leach solution (raffinate), but is still experiencing undesirable metal recovery from the heaps due to agglomerate breakdown. The use of a binder, in addition to the leach solution, during agglomeration would help to produce stronger agglomerates that did not break down during processing. However, there are no known binders that will work satisfactorily in the acidic environment of a heap, at a reasonable cost. As a result, operators of many facilities see a large loss of process efficiency due to their inability to take advantage of agglomeration. Increasing copper recovery in heap leaching by the use of binders and agglomeration would result in a significant decrease in the amount of energy consumed. Assuming that 70% of all the leaching heaps would convert to using agglomeration technology, as much as 1.64*10{sup 12} BTU per year would be able to be saved if a 25% increase in copper recovery was experienced, which is equivalent to saving approximately 18% of the energy currently being used in leaching heaps. For every week a leach cycle was decreased, a savings of as much as 1.23*10{sup 11} BTU per week would result. This project has identified several acid-resistant binders and agglomeration procedures. These binders and experimental procedures will be able to be used for use in improving the energy efficiency of heap leaching.« less

Cost comparison between ultrasound-guided 14-g large core breast biopsy and open surgical biopsy: an analysis for Austria.

PubMed

Gruber, R; Walter, E; Helbich, T H

2010-06-01

To examine the budget impact of ultrasound-guided 14-g large core breast biopsy (US-guided LCBB) by comparing the costs of US-guided LCBB and open surgical biopsy (OSB); to calculate the cost savings attributable to US-guided LCBB; and to assess the frequency with which US-guided LCBB obviates the need for an OSB. In a retrospective study, we reviewed 399 suspicious breast lesions on which US-guided LCBB and OSB or, in cases of benign histology, clinical follow-up, were performed. Cost savings were calculated using nationally allowed flat rates (A-drg) and patient charges. Costs were measured from both, a hospital and a socioeconomic perspective. Deterministic sensitivity analyses were simulated to assess the extent of achievable cost savings. Overall cost savings for US-guided LCBB over OSB were euro 977 (euro 2,337/euro 3,314) per case from a hospital perspective, resulting in a total cost decrease of 30% for the diagnosis of suspicious breast lesions. From a socioeconomic perspective, cost savings were euro 1,542 (euro 2,600/euro 4,142) per case, resulting in a 37% reduction in biopsy cost. US-guided LCBB obviated the need for a surgical procedure in 240 (60%) of 399 women. In all four sensitivity analyses, costs of US-guided LCBB remained lower than that of OSB. From an economic perspective, US-guided LCBB is highly recommended for the diagnosis of suspicious breast lesions, as this procedure reduces the cost of diagnosis substantially. In Austria, annual cost savings would be euro 18.5 million. Copyright (c) 2009 Elsevier Ireland Ltd. All rights reserved.

Wealth Accumulation and Factors Accounting for Success

PubMed Central

Pawasutipaisit, Anan; Townsend, Robert M.

2010-01-01

We use detailed income, balance sheet, and cash flow statements constructed for households in a long monthly panel in an emerging market economy, and some recent contributions in economic theory, to document and better understand the factors underlying success in achieving upward mobility in the distribution of net worth. Wealth inequality is decreasing over time, and many households work their way out of poverty and lower wealth over the seven year period. The accounts establish that, mechanically, this is largely due to savings rather than incoming gifts and remittances. In turn, the growth of net worth can be decomposed household by household into the savings rate and how productively that savings is used, the return on assets (ROA). The latter plays the larger role. ROA is, in turn, positively correlated with higher education of household members, younger age of the head, and with a higher debt/asset ratio and lower initial wealth, so it seems from cross-sections that the financial system is imperfectly channeling resources to productive and poor households. Household fixed effects account for the larger part of ROA, and this success is largely persistent, undercutting the story that successful entrepreneurs are those that simply get lucky. Persistence does vary across households, and in at least one province with much change and increasing opportunities, ROA changes as households move over time to higher-return occupations. But for those households with high and persistent ROA, the savings rate is higher, consistent with some micro founded macro models with imperfect credit markets. Indeed, high ROA households save by investing in their own enterprises and adopt consistent financial strategies for smoothing fluctuations. More generally growth of wealth, savings levels and/or rates are correlated with TFP and the household fixed effects that are the larger part of ROA. PMID:21643466

Wealth Accumulation and Factors Accounting for Success.

PubMed

Pawasutipaisit, Anan; Townsend, Robert M

2011-03-01

We use detailed income, balance sheet, and cash flow statements constructed for households in a long monthly panel in an emerging market economy, and some recent contributions in economic theory, to document and better understand the factors underlying success in achieving upward mobility in the distribution of net worth. Wealth inequality is decreasing over time, and many households work their way out of poverty and lower wealth over the seven year period. The accounts establish that, mechanically, this is largely due to savings rather than incoming gifts and remittances. In turn, the growth of net worth can be decomposed household by household into the savings rate and how productively that savings is used, the return on assets (ROA). The latter plays the larger role. ROA is, in turn, positively correlated with higher education of household members, younger age of the head, and with a higher debt/asset ratio and lower initial wealth, so it seems from cross-sections that the financial system is imperfectly channeling resources to productive and poor households. Household fixed effects account for the larger part of ROA, and this success is largely persistent, undercutting the story that successful entrepreneurs are those that simply get lucky. Persistence does vary across households, and in at least one province with much change and increasing opportunities, ROA changes as households move over time to higher-return occupations. But for those households with high and persistent ROA, the savings rate is higher, consistent with some micro founded macro models with imperfect credit markets. Indeed, high ROA households save by investing in their own enterprises and adopt consistent financial strategies for smoothing fluctuations. More generally growth of wealth, savings levels and/or rates are correlated with TFP and the household fixed effects that are the larger part of ROA.

The Adoption of an Open Textbook in a Large Physics Course: An Analysis of Cost, Outcomes, Use, and Perceptions

ERIC Educational Resources Information Center

Hendricks, Christina; Reinsberg, Stefan A.; Rieger, Georg

2017-01-01

Assigning open textbooks in college and university courses can help students save money on increasingly expensive commercial textbooks, and recent research shows that this savings can often be achieved with little to no sacrifice in textbook quality or student learning outcomes. We add to this body of research by examining the use of an open…

How changes to the Medicare Benefits Schedule could improve the practice of cardiology and save taxpayer money.

PubMed

Harper, Richard W; Nasis, Arthur; Sundararajan, Vijaya

2015-09-21

Rising health care costs above inflation are placing serious strains on the sustainability of the Australian Medicare system in its current structure. The Medicare Benefits Schedule (MBS), which lists rebates payable to patients for private medical services provided on a fee-for-service basis, is the cornerstone of the Australian health care system. Introduced in the 1980s, the MBS has changed little despite major advances in the evidence base for the practice of cardiology. We outline how we believe sensible changes to the MBS listings for four cardiac services--invasive coronary angiography, computed tomography coronary angiography, stress testing and percutaneous coronary intervention--would improve the clinical practice of cardiology and save substantial amounts of taxpayer money.

Cost-benefit analysis of Xpert MTB/RIF for tuberculosis suspects in German hospitals.

PubMed

Diel, Roland; Nienhaus, Albert; Hillemann, Doris; Richter, Elvira

2016-02-01

Our objective was to assess the cost-benefit of enhancing or replacing the conventional sputum smear with the real-time PCR Xpert MTB/RIF method in the inpatient diagnostic schema for tuberculosis (TB).Recent data from published per-case cost studies for TB/multidrug-resistant (MDR)-TB and from comparative analyses of sputum microscopy, mycobacterial culture, Xpert MTB/RIF and drug susceptibility testing, performed at the German National Reference Center for Mycobacteria, were used. Potential cost savings of Xpert MTB/RIF, based on test accuracy and multiple cost drivers, were calculated for diagnosing TB/MDR-TB suspects from the hospital perspective.Implementing Xpert MTB/RIF as an add-on in smear-positive and smear-negative TB suspects saves on average €48.72 and €503, respectively, per admitted patient as compared with the conventional approach. In smear-positive and smear-negative MDR-TB suspects, cost savings amount to €189.56 and €515.25 per person, respectively. Full replacement of microscopy by Xpert MTB/RIF saves €449.98. In probabilistic Monte-Carlo simulation, adding Xpert MTB/RIF is less costly in 46.4% and 76.2% of smear-positive TB and MDR-TB suspects, respectively, but 100% less expensive in all smear-negative suspects. Full replacement by Xpert MTB/RIF is also consistently cost-saving.Using Xpert MTB/RIF as an add-on to and even as a replacement for sputum smear examination may significantly reduce expenditures in TB suspects. Copyright ©ERS 2016.

Implementing Six Sigma in The Netherlands.

PubMed

van den Heuvel, Jaap; Does, Ronald J M M; Bogers, Ad J J C; Berg, Marc

2006-07-01

Six Sigma, a process-focused strategy and methodology for business improvement, can be used to improve care processes, eliminate waste, reduce costs, and enhance patient satisfaction. Six Sigma was introduced in 2001 at the 384-bed Red Cross Hospital (Beverwijk). During the Green Belt training, every participant was required to participate in at least one Six Sigma project. The hospital's total savings in 2004 amounted to 1.4 million dollars, for an average savings of 67,000 dollars for each of the completed 21 projects. In one project, the team designed a new admission process for the operating rooms, resulting in an average starting time nine minutes earlier. This relatively minor improvement made it possible to operate on an additional 400 patients a year and to achieve a net savings of >273,000 dollars. A second project reduced the number of patients receiving intravenous (IV) antibiotics by switching to oral administration, yielding annual savings, based on medication costs alone, of >75,000 dollars. A third project reduced the length of stay in the delivery room from 11.9 to 3.4 hours, yielding an annual savings of 68,000 dollars. The "Ultimate Cure?": Six Sigma, which entails involvement of health care workers; use of improvement tools (from industry); creation of trained project teams to tackle complex, often cross-departmental processes; data analyses; and investment in quality improvement may prove the "ultimate cure" to the current cost, quality, and safety issues that challenge health care.

Darbepoetin alfa therapeutic interchange protocol for anemia in dialysis.

PubMed

Brophy, Donald F; Ripley, Elizabeth Bd; Kockler, Denise R; Lee, Seina; Proeschel, Lori A

2005-11-01

Erythropoiesis-stimulating proteins, such as erythropoietin alfa and darbepoetin alfa, have positively impacted anemia management. These medications improve patient outcomes and quality of life. Their costs, however, remain a major barrier for health systems. To evaluate the development, implementation, and cost-effectiveness of an inpatient therapeutic interchange protocol for erythropoiesis-stimulating proteins at a large, tertiary care, university-affiliated health system. Virginia Commonwealth University Health System (VCUHS) developed and implemented a therapeutic interchange program to convert therapy for all inpatients undergoing dialysis from erythropoietin alfa to darbepoetin alfa for treatment of chronic kidney disease-related anemia. An evaluation of the economic impact of this program on drug expenditures over a fiscal quarter (2003) was conducted using historical comparator data (2002). Preliminary evaluation of the program demonstrated cost-savings and reduced drug utilization of erythropoiesis-stimulating proteins in hospitalized dialysis patients. For the first quarter of 2003 compared with the first quarter of 2002, VCUHS realized a cost-savings of nearly 10,000 US dollars, which was related to the program's aggressive screening procedure. When these data were normalized for equal numbers of patients in each group receiving one of the drugs, the actual cost-savings was over 2000 US dollars. These cost-savings are largely due to reduced utilization of these expensive biotechnology products with implementation of a dosing protocol. VCUHS has successfully developed and implemented a darbepoetin alfa therapeutic interchange protocol for hospitalized dialysis patients. This has translated into reduced use of erythropoiesis-stimulating proteins, resulting in cost-savings for the health system.

Saving energy for the data collection point in WBAN network

NASA Astrophysics Data System (ADS)

Nguyen-Duc, Toan; Kamioka, Eiji

2017-11-01

Wireless sensor networking (WSN) has been rapidly developed and become essential in various domains including health care systems. Such systems use WSN to collect real-time medical sensed data, aiming at improving the patient safety. For instance, patients suffered from adverse events, i.e., cardiac or respiratory arrests, are monitored so as to prevent them from getting harm. Sensors are placed on, in or near the patients' body to continuously collect sensing data such as the electrocardiograms, blood oxygenation, breathing, and heart rate. In this case, the sensors form a subcategory of WSN called wireless body area network (WBAN). In WBAN, sensing data are sent to one or more data collection points called personal server (PS). The role of PS is important since it forwards sensed data, to a medical server via a Bluetooth/WLAN connection in real time to support storage of information and real-time diagnosis, the device can also issue a notification of an emergency status. Since PS is a battery-based device, when its battery is empty, it will disconnect the sensed medical data with the rest network. To best of our knowledge, very few studies that focus on saving energy for the PS. To this end, this work investigates the trade-off between energy consumption for wireless communication and the amount of sensing data. An energy consumption model for wireless communication has been proposed based on direct measurement using real testbed. According to our findings, it is possible to save energy for the PS by selecting suitable wireless technology to be used based on the amount of data to be transmitted.

Data management using the personal digital assistant in an acute pain service.

PubMed

Chan, S S; Chu, C P; Cheng, B C; Chen, P P

2004-02-01

Handheld personal digital assistants (PDA) are increasingly being used by physicians for a variety of information and data management purposes. We evaluated a PDA-based data management system for our acute pain service. A structured questionnaire survey was conducted to assess staff experience and attitude towards the paper system before the introduction of the PDA, and three months after introduction of the PDA system. We compared the time taken to conduct the acute pain round before and after the implementation of the PDA. The time saved in data management and the amount of paper saved were estimated. Data from 177 patients with a total of 635 acute pain follow-up visits were entered over a three-month period. User satisfaction, ease of access to drug reference and clinical guidelines were similar between the two systems. The respondents found that the PDA was easy to use but less so than the paper system (P = 0.007), in particular, when accessing a patient's cumulative data (P = 0.007). There was no missed follow-up or data entry with the use of PDA. The time taken to attend follow-up visits was similar for the two systems (Paper: 8.8 +/- 3.2 compared to PDA: 7.0 +/- 2.0 minutes, P = 0.151). The estimated annual amount of paper and time saved in data management was 650 sheets and 130 man-hours respectively. Our experience with the use of the PDA in APS was satisfactory. The PDA system can potentially reduce time and paper use and missed data entry and patient follow-up.

Development of demand forecasting tool for natural resources recouping from municipal solid waste.

PubMed

Zaman, Atiq Uz; Lehmann, Steffen

2013-10-01

Sustainable waste management requires an integrated planning and design strategy for reliable forecasting of waste generation, collection, recycling, treatment and disposal for the successful development of future residential precincts. The success of the future development and management of waste relies to a high extent on the accuracy of the prediction and on a comprehensive understanding of the overall waste management systems. This study defies the traditional concepts of waste, in which waste was considered as the last phase of production and services, by putting forward the new concept of waste as an intermediate phase of production and services. The study aims to develop a demand forecasting tool called 'zero waste index' (ZWI) for measuring the natural resources recouped from municipal solid waste. The ZWI (ZWI demand forecasting tool) quantifies the amount of virgin materials recovered from solid waste and subsequently reduces extraction of natural resources. In addition, the tool estimates the potential amount of energy, water and emissions avoided or saved by the improved waste management system. The ZWI is tested in a case study of waste management systems in two developed cities: Adelaide (Australia) and Stockholm (Sweden). The ZWI of waste management systems in Adelaide and Stockholm is 0.33 and 0.17 respectively. The study also enumerates per capita energy savings of 2.9 GJ and 2.83 GJ, greenhouse gas emissions reductions of 0.39 tonnes (CO2e) and 0.33 tonnes (CO2e), as well as water savings of 2.8 kL and 0.92 kL in Adelaide and Stockholm respectively.

Cost Savings and Patient Experiences of a Clinic-Based, Wide-Awake Hand Surgery Program at a Military Medical Center: A Critical Analysis of the First 100 Procedures.

PubMed

Rhee, Peter C; Fischer, Michelle M; Rhee, Laura S; McMillan, Ha; Johnson, Anthony E

2017-03-01

Wide-awake, local anesthesia, no tourniquet (WALANT) hand surgery was developed to improve access to hand surgery care while optimizing medical resources. Hand surgery in the clinic setting may result in substantial cost savings for the United States Military Health Care System (MHS) and provide a safe alternative to performing similar procedures in the operating room. A prospective cohort study was performed on the first 100 consecutive clinic-based WALANT hand surgery procedures performed at a military medical center from January 2014 to September 2015 by a single hand surgeon. Cost savings analysis was performed by using the Medical Expense and Performance Reporting System, the standard cost accounting system for the MHS, to compare procedures performed in the clinic versus the operating room during the study period. A study specific questionnaire was obtained for 66 procedures to evaluate the patient's experience. For carpal tunnel release (n = 34) and A1 pulley release (n = 33), there were 85% and 70% cost savings by having the procedures performed in clinic under WALANT compared with the main operating room, respectively. During the study period, carpal tunnel release, A1 pulley release, and de Quervain release performed in the clinic instead of the operating room amounted to $393,100 in cost savings for the MHS. There were no adverse events during the WALANT procedure. A clinic-based WALANT hand surgery program at a military medical center results in considerable cost savings for the MHS. Economic/Decision Analysis IV. Copyright © 2017 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

Refractive Outcomes, Contrast Sensitivity, HOAs, and Patient Satisfaction in Moderate Myopia: Wavefront-Optimized Versus Tissue-Saving PRK.

PubMed

Nassiri, Nader; Sheibani, Kourosh; Azimi, Abbas; Khosravi, Farinaz Mahmoodi; Heravian, Javad; Yekta, Abasali; Moghaddam, Hadi Ostadi; Nassiri, Saman; Yasseri, Mehdi; Nassiri, Nariman

2015-10-01

To compare refractive outcomes, contrast sensitivity, higher-order aberrations (HOAs), and patient satisfaction after photorefractive keratectomy for correction of moderate myopia with two methods: tissue saving versus wavefront optimized. In this prospective, comparative study, 152 eyes (80 patients) with moderate myopia with and without astigmatism were randomly divided into two groups: the tissue-saving group (Technolas 217z Zyoptix laser; Bausch & Lomb, Rochester, NY) (76 eyes of 39 patients) or the wavefront-optimized group (WaveLight Allegretto Wave Eye-Q laser; Alcon Laboratories, Inc., Fort Worth, TX) (76 eyes of 41 patients). Preoperative and 3-month postoperative refractive outcomes, contrast sensitivity, HOAs, and patient satisfaction were compared between the two groups. The mean spherical equivalent was -4.50 ± 1.02 diopters. No statistically significant differences were detected between the groups in terms of uncorrected and corrected distance visual acuity and spherical equivalent preoperatively and 3 months postoperatively. No statistically significant differences were seen in the amount of preoperative to postoperative contrast sensitivity changes between the two groups in photopic and mesopic conditions. HOAs and Q factor increased in both groups postoperatively (P = .001), with the tissue-saving method causing more increases in HOAs (P = .007) and Q factor (P = .039). Patient satisfaction was comparable between both groups. Both platforms were effective in correcting moderate myopia with or without astigmatism. No difference in refractive outcome, contrast sensitivity changes, and patient satisfaction between the groups was observed. Postoperatively, the tissue-saving method caused a higher increase in HOAs and Q factor compared to the wavefront-optimized method, which could be due to larger optical zone sizes in the tissue-saving group. Copyright 2015, SLACK Incorporated.

Exploring Northwest China's agricultural water-saving strategy: analysis of water use efficiency based on an SE-DEA model conducted in Xi'an, Shaanxi Province.

PubMed

Mu, L; Fang, L; Wang, H; Chen, L; Yang, Y; Qu, X J; Wang, C Y; Yuan, Y; Wang, S B; Wang, Y N

Worldwide, water scarcity threatens delivery of water to urban centers. Increasing water use efficiency (WUE) is often recommended to reduce water demand, especially in water-scarce areas. In this paper, agricultural water use efficiency (AWUE) is examined using the super-efficient data envelopment analysis (DEA) approach in Xi'an in Northwest China at a temporal and spatial level. The grey systems analysis technique was then adopted to identify the factors that influenced the efficiency differentials under the shortage of water resources. From the perspective of temporal scales, the AWUE increased year by year during 2004-2012, and the highest (2.05) was obtained in 2009. Additionally, the AWUE was the best in the urban area at the spatial scale. Moreover, the key influencing factors of the AWUE are the financial situations and agricultural water-saving technology. Finally, we identified several knowledge gaps and proposed water-saving strategies for increasing AWUE and reducing its water demand by: (1) improving irrigation practices (timing and amounts) based on compatible water-saving techniques; (2) maximizing regional WUE by managing water resources and allocation at regional scales as well as enhancing coordination among Chinese water governance institutes.

Energy-saving approaches to solid state street lighting

NASA Astrophysics Data System (ADS)

Vitta, Pranciškus; Stanikūnas, Rytis; Tuzikas, Arūnas; Reklaitis, Ignas; Stonkus, Andrius; Petrulis, Andrius; Vaitkevičius, Henrikas; Žukauskas, Artūras

2011-10-01

We consider the energy-saving potential of solid-state street lighting due to improved visual performance, weather sensitive luminance control and tracking of pedestrians and vehicles. A psychophysical experiment on the measurement of reaction time with a decision making task was performed under mesopic levels of illumination provided by a highpressure sodium (HPS) lamp and different solid-state light sources, such as daylight and warm-white phosphor converted light-emitting diodes (LEDs) and red-green-blue LED clusters. The results of the experiment imply that photopic luminances of road surface provided by solid-state light sources with an optimized spectral power distribution might be up to twice as low as those provided by the HPS lamp. Dynamical correction of road luminance against road surface conditions typical of Lithuanian climate was estimated to save about 20% of energy in comparison with constant-level illumination. The estimated energy savings due to the tracking of pedestrians and vehicles amount at least 25% with the cumulative effect of intelligent control of at least 40%. A solid-state street lighting system with intelligent control was demonstrated using a 300 m long test ground consisting of 10 solid-state street luminaires, a meteorological station and microwave motion sensor network operated via power line communication.

The Economics of Provider Payment Reform: Are Accountable Care Organizations the Answer?

PubMed

Feldman, Roger

2015-08-01

A remarkable consensus has developed that the fee-for-service (FFS) approach for paying medical providers must be replaced. This payment approach is said to increase the volume of services without improving care coordination. In response to these calls, Medicare and private payers are experimenting with payment systems that combine the basic element of FFS - a fee for each service - with arrangements that allow providers to share the savings if they hold total spending per patient below a targeted amount. Medicare's accountable care organizations (ACOs) embody the shared savings approach to payment reform. Private payers have introduced total cost of care contracting (TCOC) in several locations. This article questions the consensus that FFS must go. If the fees are too high, then someone needs to "bite the bullet" and reduce fees in key areas. Hoping to control overspending by investment in ACOs is wishful thinking. I describe the theory and practice of shared savings payment systems and summarize recent TCOC contracting initiatives in the private sector. Medicare's shared savings approach is likely to be less effective than private contracts. Cutting providers' fees would be more efficient. Finally, the new payment models in the Affordable Care Act will not ease the problem of high prices for private payers. Copyright © 2015 by Duke University Press.

Are cooler surfaces a cost-effect mitigation of urban heat islands?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pomerantz, Melvin

Much research has gone into technologies to mitigate urban heat islands by making urban surfaces cooler by increasing their albedos. To be practical, the benefit of the technology must be greater than its cost. Here, this report provides simple methods for quantifying the maxima of some benefits that albedo increases may provide. The method used is an extension of an earlier paper that estimated the maximum possible electrical energy saving achievable in an entire city in a year by a change of albedo of its surfaces. The present report estimates the maximum amounts and monetary savings of avoided CO 2more » emissions and the decreases in peak power demands. As examples, for several warm cities in California, a 0.2 increase in albedo of pavements is found to reduce CO 2 emissions by < 1 kg per m 2 per year. At the current price of CO 2 reduction in California, the monetary saving is < US$ 0.01 per year per m 2 modified. The resulting maximum peak-power reductions are estimated to be < 7% of the base power of the city. In conclusion, the magnitudes of the savings are such that decision-makers should choose carefully which urban heat island mitigation techniques are cost effective.« less

Cost Analysis of a Novel Enzymatic Debriding Agent for Management of Burn Wounds

PubMed Central

Giudice, Giuseppe; Filoni, Angela; Maggio, Giulio

2017-01-01

Introduction. Given its efficacy and safety, NexoBrid™ (NXB) has become part of our therapeutic options in burns treatment with satisfactory results. However, no cost analysis comparing NXB to the standard of care (SOC) has been carried out as of today. Aim. To assess the cost of treatment with NXB and compare it to the SOC cost. Methods. 20 patients with 14–22% of TBSA with an intermediate-deep thermal burn related injury were retrospectively and consecutively included. 10 of these patients were treated with the SOC, while the other 10 with NXB. The cost analysis was performed in accordance with the weighted average Italian Health Ministry DRGs and with Conferenza Stato/Regioni 2003 and the study by Tan et al. For each cost, 95% confidence intervals have been evaluated. Results. Considering the 10 patients treated with NXB, the overall savings (total net saving) amounted to 53300 euros. The confidence interval analysis confirmed the savings. Discussion. As shown by our preliminary results, significant savings are obtained with the use of NXB. The limit of our study is that it is based on Italian health care costs and assesses a relative small cohort of patients. Further studies on larger multinational cohorts are warranted. PMID:28293640

Are cooler surfaces a cost-effect mitigation of urban heat islands?

DOE PAGES

Pomerantz, Melvin

2017-04-20

Much research has gone into technologies to mitigate urban heat islands by making urban surfaces cooler by increasing their albedos. To be practical, the benefit of the technology must be greater than its cost. Here, this report provides simple methods for quantifying the maxima of some benefits that albedo increases may provide. The method used is an extension of an earlier paper that estimated the maximum possible electrical energy saving achievable in an entire city in a year by a change of albedo of its surfaces. The present report estimates the maximum amounts and monetary savings of avoided CO 2more » emissions and the decreases in peak power demands. As examples, for several warm cities in California, a 0.2 increase in albedo of pavements is found to reduce CO 2 emissions by < 1 kg per m 2 per year. At the current price of CO 2 reduction in California, the monetary saving is < US$ 0.01 per year per m 2 modified. The resulting maximum peak-power reductions are estimated to be < 7% of the base power of the city. In conclusion, the magnitudes of the savings are such that decision-makers should choose carefully which urban heat island mitigation techniques are cost effective.« less

Improving energy efficiency of Embedded DRAM Caches for High-end Computing Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mittal, Sparsh; Vetter, Jeffrey S; Li, Dong

2014-01-01

With increasing system core-count, the size of last level cache (LLC) has increased and since SRAM consumes high leakage power, power consumption of LLCs is becoming a significant fraction of processor power consumption. To address this, researchers have used embedded DRAM (eDRAM) LLCs which consume low-leakage power. However, eDRAM caches consume a significant amount of energy in the form of refresh energy. In this paper, we propose ESTEEM, an energy saving technique for embedded DRAM caches. ESTEEM uses dynamic cache reconfiguration to turn-off a portion of the cache to save both leakage and refresh energy. It logically divides the cachemore » sets into multiple modules and turns-off possibly different number of ways in each module. Microarchitectural simulations confirm that ESTEEM is effective in improving performance and energy efficiency and provides better results compared to a recently-proposed eDRAM cache energy saving technique, namely Refrint. For single and dual-core simulations, the average saving in memory subsystem (LLC+main memory) on using ESTEEM is 25.8% and 32.6%, respectively and average weighted speedup are 1.09X and 1.22X, respectively. Additional experiments confirm that ESTEEM works well for a wide-range of system parameters.« less

Assessing the urban water balance: the Urban Water Flow Model and its application in Cyprus.

PubMed

Charalambous, Katerina; Bruggeman, Adriana; Lange, Manfred A

2012-01-01

Modelling the urban water balance enables the understanding of the interactions of water within an urban area and allows for better management of water resources. However, few models today provide a comprehensive overview of all water sources and uses. The objective of the current paper was to develop a user-friendly tool that quantifies and visualizes all water flows, losses and inefficiencies in urban environments. The Urban Water Flow Model was implemented in a spreadsheet and includes a water-savings application that computes the contributions of user-selected saving options to the overall water balance. The model was applied to the coastal town of Limassol, Cyprus, for the hydrologic years 2003/04-2008/09. Data were collected from the different authorities and hydrologic equations and estimations were added to complete the balance. Average precipitation was 363 mm/yr, amounting to 25.4 × 10(6)m(3)/yr, more than double the annual potable water supply to the town. Surface runoff constituted 29.6% of all outflows, while evapotranspiration from impervious areas was 21.6%. Possible potable water savings for 2008/09 were estimated at 5.3 × 10(3) m(3), which is 50% of the total potable water provided to the area. This saving would also result in a 6% reduction of surface runoff.

Energy savings modelling of re-tuning energy conservation measures in large office buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fernandez, Nick; Katipamula, Srinivas; Wang, Weimin

Today, many large commercial buildings use sophisticated building automation systems (BASs) to manage a wide range of building equipment. While the capabilities of BASs have increased over time, many buildings still do not fully use the BAS’s capabilities and are not properly commissioned, operated or maintained, which leads to inefficient operation, increased energy use, and reduced lifetimes of the equipment. This paper investigates the energy savings potential of several common HVAC system re-tuning measures on a typical large office building, using the Department of Energy’s building energy modeling software, EnergyPlus. The baseline prototype model uses roughly as much energy asmore » an average large office building in existing building stock, but does not utilize any re-tuning measures. Individual re-tuning measures simulated against this baseline include automatic schedule adjustments, damper minimum flow adjustments, thermostat adjustments, as well as dynamic resets (set points that change continuously with building and/or outdoor conditions) to static pressure, supply-air temperature, condenser water temperature, chilled and hot water temperature, and chilled and hot water differential pressure set points. Six combinations of these individual measures have been formulated – each designed to conform to limitations to implementation of certain individual measures that might exist in typical buildings. All the individual measures and combinations were simulated in 16 climate locations representative of specific U.S. climate zones. The modeling results suggest that the most effective energy savings measures are those that affect the demand-side of the building (air-systems and schedules). Many of the demand-side individual measures were capable of reducing annual total HVAC system energy consumption by over 20% in most cities that were modeled. Supply side measures affecting HVAC plant conditions were only modestly successful (less than 5% annual HVAC energy savings for most cities for all measures). Combining many of the re-tuning measures revealed deep savings potential. Some of the more aggressive combinations revealed 35-75% reductions in annual HVAC energy consumption, depending on climate and building vintage.« less

Energy efficiency in the U.S. residential sector: An engineering and economic assessment of opportunities for large energy savings and greenhouse gas emissions reductions

NASA Astrophysics Data System (ADS)

Lima de Azevedo, Ines Margarida

Energy efficiency and conservation is a very promising part of a portfolio of the needed strategies to mitigate climate change. Several technologies and energy efficiency measures in the residential sector offer potential for large energy savings. However, while energy efficiency options are currently considered as a means of reducing carbon emissions, there is still large uncertainty about the effect of such measures on overall carbon savings. The first part of this thesis provides a national assessment of the energy efficiency potential in the residential sector under several different scenarios, which include the perspectives of different economic agents (consumers, utilities, ESCOs, and a society). The scenarios also include maximizing energy, electricity or carbon dioxide savings. The second part of this thesis deals with a detailed assessment of the potential for white-light LEDs for energy and carbon dioxide savings in the U.S. commercial and residential sectors. Solid-state lighting shows great promise as a source of efficient, affordable, color-balanced white light. Indeed, assuming market discount rates, the present work demonstrates that white solid-state lighting already has a lower levelized annual cost (LAC) than incandescent bulbs and that it will be lower than that of the most efficient fluorescent bulbs by the end of this decade. However, a large literature indicates that households do not make their decisions in terms of simple expected economic value. The present analysis shows that incorporating the findings from literature on high implicit discount rates from households when performing decisions towards efficient technologies delays the adoption of white LEDs by a couple of years. After a review of the technology, the present work compares the electricity consumption, carbon emissions and cost-effectiveness of current lighting technologies, when accounting for expected performance evolution through 2015. Simulations of lighting electricity consumption and implicit greenhouse gases emissions for the U.S. residential and commercial sectors through 2015 under different policy scenarios (voluntary solid-state lighting adoption, implementation of lighting standards in new construction and rebate programs or equivalent subsidies) are also included.

Dynamic Weather Routes: A Weather Avoidance Concept for Trajectory-Based Operations

NASA Technical Reports Server (NTRS)

McNally, B. David; Love, John

2011-01-01

The integration of convective weather modeling with trajectory automation for conflict detection, trial planning, direct routing, and auto resolution has uncovered a concept that could help controllers, dispatchers, and pilots identify improved weather routes that result in significant savings in flying time and fuel burn. Trajectory automation continuously and automatically monitors aircraft in flight to find those that could potentially benefit from improved weather reroutes. Controllers, dispatchers, and pilots then evaluate reroute options to assess their suitability given current weather and traffic. In today's operations aircraft fly convective weather avoidance routes that were implemented often hours before aircraft approach the weather and automation does not exist to automatically monitor traffic to find improved weather routes that open up due to changing weather conditions. The automation concept runs in real-time and employs two keysteps. First, a direct routing algorithm automatically identifies flights with large dog legs in their routes and therefore potentially large savings in flying time. These are common - and usually necessary - during convective weather operations and analysis of Fort Worth Center traffic shows many aircraft with short cuts that indicate savings on the order of 10 flying minutes. The second and most critical step is to apply trajectory automation with weather modeling to determine what savings could be achieved by modifying the direct route such that it avoids weather and traffic and is acceptable to controllers and flight crews. Initial analysis of Fort Worth Center traffic suggests a savings of roughly 50% of the direct route savings could be achievable.The core concept is to apply trajectory automation with convective weather modeling in real time to identify a reroute that is free of weather and traffic conflicts and indicates enough time and fuel savings to be considered. The concept is interoperable with today's integrated FMS/datalink. Auxiliary(lat/long) waypoints define a minimum delay reroute between current position and a downstream capture fix beyond the weather. These auxiliary waypoints can be uplinked to equipped aircraft and auto-loaded into the FMS. Alternatively, for unequipped aircraft, auxiliary waypoints can be replaced by nearby named fixes, but this could reduce potential savings. The presentation includes an overview of the automation approach and focuses on several cases in terms of potential savings, reroute complexity, best auxiliary waypoint solution vs. named fix solution, and other metrics.

Quantifying the benefits of a building retrofit using an integrated system approach: A case study

DOE PAGES

Regnier, Cynthia; Sun, Kaiyu; Hong, Tianzhen; ...

2017-11-11

Building retrofits provide a large opportunity to significantly reduce energy consumption in the buildings sector. Traditional building retrofits focus on equipment upgrades, often at the end of equipment life or failure, and result in replacement with marginally improved similar technology and limited energy savings. The Integrated System (IS) retrofit approach enables much greater energy savings by leveraging interactive effects between end use systems, enabling downsized or lower energy technologies. This work presents a case study in Hawaii quantifying the benefits of an IS retrofit approach compared to two traditional retrofit approaches: a Standard Practice of upgrading equipment to meet minimummore » code requirements, and an Improved Practice of upgrading equipment to a higher efficiency. The IS approach showed an energy savings of 84% over existing building energy use, much higher than the traditional approaches of 13% and 33%. The IS retrofit also demonstrated the greatest energy cost savings potential. While the degree of savings realized from the IS approach will vary by building and climate, these findings indicate that savings on the order of 50% and greater are not possible without an IS approach. It is therefore recommended that the IS approach be universally adopted to achieve deep energy savings.« less

Quantifying the benefits of a building retrofit using an integrated system approach: A case study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Regnier, Cynthia; Sun, Kaiyu; Hong, Tianzhen

Building retrofits provide a large opportunity to significantly reduce energy consumption in the buildings sector. Traditional building retrofits focus on equipment upgrades, often at the end of equipment life or failure, and result in replacement with marginally improved similar technology and limited energy savings. The Integrated System (IS) retrofit approach enables much greater energy savings by leveraging interactive effects between end use systems, enabling downsized or lower energy technologies. This work presents a case study in Hawaii quantifying the benefits of an IS retrofit approach compared to two traditional retrofit approaches: a Standard Practice of upgrading equipment to meet minimummore » code requirements, and an Improved Practice of upgrading equipment to a higher efficiency. The IS approach showed an energy savings of 84% over existing building energy use, much higher than the traditional approaches of 13% and 33%. The IS retrofit also demonstrated the greatest energy cost savings potential. While the degree of savings realized from the IS approach will vary by building and climate, these findings indicate that savings on the order of 50% and greater are not possible without an IS approach. It is therefore recommended that the IS approach be universally adopted to achieve deep energy savings.« less

Chapter 17: Residential Behavior Evaluation Protocol. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurnik, Charles W.; Stewart, James; Todd, Annika

Residential behavior-based (BB) programs use strategies grounded in the behavioral and social sciences to influence household energy use. These may include providing households with real-time or delayed feedback about their energy use; supplying energy efficiency education and tips; rewarding households for reducing their energy use; comparing households to their peers; and establishing games, tournaments, and competitions. BB programs often target multiple energy end uses and encourage energy savings, demand savings, or both. Savings from BB programs are usually a small percentage of energy use, typically less than 5 percent. Utilities will continue to implement residential BB programs as large-scale, randomizedmore » control trials (RCTs); however, some are now experimenting with alternative program designs that are smaller scale; involve new communication channels such as the web, social media, and text messaging; or that employ novel strategies for encouraging behavior change (for example, Facebook competitions). These programs will create new evaluation challenges and may require different evaluation methods than those currently employed to verify any savings they generate. Quasi-experimental methods, however, require stronger assumptions to yield valid savings estimates and may not measure savings with the same degree of validity and accuracy as randomized experiments.« less

Chapter 11: Sample Design Cross-Cutting Protocol. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurnik, Charles W; Khawaja, M. Sami; Rushton, Josh

Evaluating an energy efficiency program requires assessing the total energy and demand saved through all of the energy efficiency measures provided by the program. For large programs, the direct assessment of savings for each participant would be cost-prohibitive. Even if a program is small enough that a full census could be managed, such an undertaking would almost always be an inefficient use of evaluation resources. The bulk of this chapter describes methods for minimizing and quantifying sampling error. Measurement error and regression error are discussed in various contexts in other chapters.

Health Care Savings: The Economic Value of Diagnostic and Therapeutic Care for Obstructive Sleep Apnea

PubMed Central

Watson, Nathaniel F.

2016-01-01

Two new white papers commissioned by the American Academy of Sleep Medicine (AASM) provide an in-depth, detailed analysis of the vast economic burden associated with undiagnosed and untreated obstructive sleep apnea among adults in the United States. While the individual health benefits of treating OSA are well established, these papers emphasize the value of comprehensive OSA testing and treatment, which can provide dramatic health care savings for payors and large employers. Citation: Watson NF. Health care savings: the economic value of diagnostic and therapeutic care for obstructive sleep apnea. J Clin Sleep Med 2016;12(8):1075–1077. PMID:27448424

Economic Analysis of the Return-on-Investment of a Worksite Wellness Program for a Large Multistate Retail Grocery Organization.

PubMed

Light, Emily M W; Kline, Allison S; Drosky, Megan A; Chapman, Larry S

2015-08-01

The objective of this study is to measure the return on investment (ROI) of the Price Chopper/Golub Corporation employee population who participate in wellness programs available to them. Medical claims data, risk level, and presence of comorbidities such as diabetes and heart disease were compared in a matched retrospective cohort of participants and nonparticipants, with 2008, 2009, and 2010 serving as measurement years. Program costs and estimated savings were used to calculate an ROI of $4.33 for every dollar invested in wellness programs. Reductions in medical costs were observed at several risk and participation levels, with an average savings of $133 per participant and a 3-year savings estimate of $285,706. The positive ROI and savings estimate indicate that wellness interventions added economic value to Price Chopper/Golub Corporation.

Sara Lee: Improved Compressed Air System Increases Efficiency and Saves Energy at an Industrial Bakery

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This case study was prepared for the Industrial Technologies Program of the U.S. Department of Energy (DOE); it describes the energy and costs savings resulting from improving the compressed air system of a large Sara Lee bakery in Sacramento, California. The compressed air system supports many operations of the bread-making machines, and it had been performing poorly. A specialist from Draw Professional Services, a DOE Allied Partner, evaluated the system, and his suggestions included repairing a controller, fixing leaks, and replacing a compressor with a new one fitted with an energy-saving variable-speed drive. As a result, the bakery has reducedmore » its energy use by 471,000 kilowatt-hours annually and is saving $50,000 per year in operating and maintenance costs.« less

Cost savings through implementation of an integrated home-based record: a case study in Vietnam.

PubMed

Aiga, Hirotsugu; Pham Huy, Tuan Kiet; Nguyen, Vinh Duc

2018-03-01

In Vietnam, there are three major home-based records (HBRs) for maternal and child health (MCH) that have been already nationally scaled up, i.e., Maternal and Child Health Handbook (MCH Handbook), Child Vaccination Handbook, and Child Growth Monitoring Chart. The MCH Handbook covers all the essential recording items that are included in the other two. This overlapping of recording items between the HBRs is likely to result in inefficient use of both financial and human resources. This study is aimed at estimating the magnitude of cost savings that are expected to be realized through implementing exclusively the MCH Handbook by terminating the other two. Secondary data collection and analyses on HBR production and distribution costs and health workers' opportunity costs. Through multiplying the unit costs by their respective quantity multipliers, recurrent costs of operations of three HBRs were estimated. Moreover, magnitude of cost savings likely to be realized was estimated, by calculating recurrent costs overlapping between the three HBRs. It was estimated that implementing exclusively the MCH Handbook would lead to cost savings of United States dollar 3.01 million per annum. The amount estimated is minimum cost savings because only recurrent cost elements (HBR production and distribution costs and health workers' opportunity costs) were incorporated into the estimation. Further indirect cost savings could be expected through reductions in health expenditures, as the use of the MCH Handbook would contribute to prevention of maternal and child illnesses by increasing antenatal care visits and breastfeeding practices. To avoid wasting financial and human resources, the MCH Handbook should be exclusively implemented by abolishing the other two HBRs. This study is globally an initial attempt to estimate cost savings to be realized through avoiding overlapping operations between multiple HBRs for MCH. Copyright © 2017 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

Perceived financial retirement preparedness and its correlates: a national study in Israel.

PubMed

Segel-Karpas, Dikla; Werner, Perla

2014-01-01

Studies suggest that a large proportion of adults do not manage to save enough for retirement. Correlates of retirement saving behaviors have yet to be fully understood. The goal of this study was to examine perceived financial preparedness for retirement and its correlates. We studied the effect of perceived financial knowledge and involvement, social and institutional support, and attitudes toward retirement in a national sample of 227 non-retired Israeli adults (mean age = 44; 53% female; 81% Jewish). Results indicated that only about 20% perceived themselves as financially prepared for retirement. The main correlates of financial preparedness were financial knowledge and involvement in financial activities. The results show that a large proportion of the Israeli population feel underprepared for retirement. Those who perceive themselves as having high levels of financial knowledge are less predisposed to feel underprepared. Future research should examine the relationship between perceived financial preparedness and actual savings. © The Author(s) 2015 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Estimating the Effects of Module Area on Thin-Film Photovoltaic System Costs: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Horowitz, Kelsey A; Fu, Ran; Silverman, Timothy J

We investigate the potential effects of module area on the cost and performance of photovoltaic systems. Applying a bottom-up methodology, we analyzed the costs associated with thin-film modules and systems as a function of module area. We calculate a potential for savings of up to 0.10 dollars/W and 0.13 dollars/W in module manufacturing costs for CdTe and CIGS respectively, with large area modules. We also find that an additional 0.04 dollars/W savings in balance-of-systems costs may be achieved. Sensitivity of the dollar/W cost savings to module efficiency, manufacturing yield, and other parameters is presented. Lifetime energy yield must also bemore » maintained to realize reductions in the levelized cost of energy; the effects of module size on energy yield for monolithic thin-film modules are not yet well understood. Finally, we discuss possible non-cost barriers to adoption of large area modules.« less

31 CFR 351.3 - What special terms do I need to know to understand this part?

Code of Federal Regulations, 2010 CFR

2010-07-01

... the face of the bond. Interest, as used in this part, is the difference between the principal amount... potential or actual redemption. In the case of a book-entry Series EE savings bond, it also refers to a... of potential or actual redemption. Registration means that the names of all persons named on the bond...

31 CFR 359.55 - How are redemption values calculated for book-entry Series I savings bonds?

Code of Federal Regulations, 2013 CFR

2013-07-01

... 31 Money and Finance:Treasury 2 2013-07-01 2013-07-01 false How are redemption values calculated... prorated to the book-entry par investment amount for the corresponding issue and redemption dates... to $25.04; calculated value of $25.045 rounds to $25.05. [Book-entry par investment ÷ 100] × [CRV...

31 CFR 359.55 - How are redemption values calculated for book-entry Series I savings bonds?

Code of Federal Regulations, 2012 CFR

2012-07-01

... 31 Money and Finance:Treasury 2 2012-07-01 2012-07-01 false How are redemption values calculated... prorated to the book-entry par investment amount for the corresponding issue and redemption dates... to $25.04; calculated value of $25.045 rounds to $25.05. [Book-entry par investment ÷ 100] × [CRV...

31 CFR 359.55 - How are redemption values calculated for book-entry Series I savings bonds?

Code of Federal Regulations, 2014 CFR

2014-07-01

... 31 Money and Finance: Treasury 2 2014-07-01 2014-07-01 false How are redemption values calculated... prorated to the book-entry par investment amount for the corresponding issue and redemption dates... to $25.04; calculated value of $25.045 rounds to $25.05. [Book-entry par investment ÷ 100] × [CRV...

Welfare Reform, Saving, and Vehicle Ownership: Do Asset Limits and Vehicle Exemptions Matter?

ERIC Educational Resources Information Center

Sullivan, James X.

2006-01-01

This paper examines whether AFDC/TANF asset tests affect the asset holdings of low-educated single mothers. Special emphasis is given to vehicle assets that make up a very significant share of total wealth for poor families. Consistent with other recent research, the author finds little evidence that asset limits have an effect on the amount of…

USDA's Vick tells radio audience wind farms mean huge water savings

USDA-ARS?s Scientific Manuscript database

Since most of the electricity in the U.S. is generated using coal and natural gas as fuel, almost every wind farm announcement includes the estimated amount of carbon dioxide which was not released to the atmosphere. According to Wikipedia, 2.25 tons of CO2 and 1.14 tons of CO2 were released for eve...

31 CFR 359.52 - What happens if any person purchases book-entry Series I savings bonds in excess of the maximum...

Code of Federal Regulations, 2010 CFR

2010-07-01

... the maximum amount? We reserve the right to take any action we deem necessary to adjust the excess, including the right to remove the excess bonds from your New Treasury Direct account and refund the payment price to your bank account of record using the ACH method of payment. ...

11 CFR 104.3 - Contents of reports (2 U.S.C. 434(b), 439a).

Code of Federal Regulations, 2010 CFR

2010-01-01

... reporting period, including: currency; balance on deposit in banks, savings and loan institutions, and other... expenditure; (A) As used in 11 CFR 104.3(b)(3), purpose means a brief statement or description of why the... expenses, together with the date, amount and purpose of each expenditure. (A) As used in this paragraph...

12 CFR 159.12 - How may a subsidiary of a Federal savings association issue securities?

Code of Federal Regulations, 2014 CFR

2014-01-01

... establishing or acquiring a new subsidiary. If the OCC notifies you within 30 days that the notice presents... subsidiary; the percentage that such amount represents of the current book value of your assets on an unconsolidated basis; and the current book value of all such assets of the subsidiary; (2) The terms of any...

12 CFR 559.12 - How may a subsidiary of a savings association issue securities?

Code of Federal Regulations, 2012 CFR

2012-01-01

... acquiring a new subsidiary. If OTS notifies you within 30 days that the notice presents supervisory concerns... amount represents of the current book value of your assets on an unconsolidated basis; and the current book value of all such assets of the subsidiary; (2) The terms of any guarantee(s) issued by you or any...

12 CFR 559.12 - How may a subsidiary of a savings association issue securities?

Code of Federal Regulations, 2011 CFR

2011-01-01

... acquiring a new subsidiary. If OTS notifies you within 30 days that the notice presents supervisory concerns... amount represents of the current book value of your assets on an unconsolidated basis; and the current book value of all such assets of the subsidiary; (2) The terms of any guarantee(s) issued by you or any...

12 CFR 159.12 - How may a subsidiary of a Federal savings association issue securities?

Code of Federal Regulations, 2012 CFR

2012-01-01

... establishing or acquiring a new subsidiary. If the OCC notifies you within 30 days that the notice presents... subsidiary; the percentage that such amount represents of the current book value of your assets on an unconsolidated basis; and the current book value of all such assets of the subsidiary; (2) The terms of any...

12 CFR 559.12 - How may a subsidiary of a savings association issue securities?

Code of Federal Regulations, 2013 CFR

2013-01-01

... acquiring a new subsidiary. If OTS notifies you within 30 days that the notice presents supervisory concerns... amount represents of the current book value of your assets on an unconsolidated basis; and the current book value of all such assets of the subsidiary; (2) The terms of any guarantee(s) issued by you or any...

12 CFR 159.12 - How may a subsidiary of a Federal savings association issue securities?

Code of Federal Regulations, 2013 CFR

2013-01-01

... establishing or acquiring a new subsidiary. If the OCC notifies you within 30 days that the notice presents... subsidiary; the percentage that such amount represents of the current book value of your assets on an unconsolidated basis; and the current book value of all such assets of the subsidiary; (2) The terms of any...

Economic benefit analysis of cultivating Pleurotus ostreatus with rape straw

NASA Astrophysics Data System (ADS)

Guan, Qinlan; Gong, Mingfu; Tang, Mei

2018-04-01

The cultivation of Pleurotus ostreatus with rape straw not only can save the cultivation cost of P. ostreatus, but also can reuse the resources and protect the environment. By adding different proportion of rape straw to the cultivation material of P. ostreatus, the reasonable amount of rape straw was selected and the economic benefit of P. ostreatus cultivated with the optimum amount of rape straw was analyzed. The results showed that adding 10% to 40% rape straw to the cultivation material of P. ostreatus did not affect the yield and biological conversion rate of P. ostreatus, and the ratio of production and investment of the amount of rape straw in the range of 10% to 50% was higher than of cottonseed husk alone as the main material of the formula.

Cross-layer Energy Optimization Under Image Quality Constraints for Wireless Image Transmissions.

PubMed

Yang, Na; Demirkol, Ilker; Heinzelman, Wendi

2012-01-01

Wireless image transmission is critical in many applications, such as surveillance and environment monitoring. In order to make the best use of the limited energy of the battery-operated cameras, while satisfying the application-level image quality constraints, cross-layer design is critical. In this paper, we develop an image transmission model that allows the application layer (e.g., the user) to specify an image quality constraint, and optimizes the lower layer parameters of transmit power and packet length, to minimize the energy dissipation in image transmission over a given distance. The effectiveness of this approach is evaluated by applying the proposed energy optimization to a reference ZigBee system and a WiFi system, and also by comparing to an energy optimization study that does not consider any image quality constraint. Evaluations show that our scheme outperforms the default settings of the investigated commercial devices and saves a significant amount of energy at middle-to-large transmission distances.

Review on water leakage control in distribution networks and the associated environmental benefits.

PubMed

Xu, Qiang; Liu, Ruiping; Chen, Qiuwen; Li, Ruonan

2014-05-01

Water supply is the primary element of an urban system. Due to rapid urbanization and water scarcity, maintaining a stable and safe water supply has become a challenge to many cities, whereas a large amount of water is lost from the pipes of distribution systems. Water leakage is not only a waste of water resources, but also incurs great socio-economic costs. This article presents a comprehensive review on the potential water leakage control approaches and specifically discusses the benefits of each to environmental conservation. It is concluded that water leakage could be further reduced by improving leakage detection capability through a combination of predictive modeling and monitoring instruments, optimizing pipe maintenance strategy, and developing an instant pressure regulation system. The environment could benefit from these actions because of water savings and the reduction of energy consumption as well as greenhouse gas emissions. Copyright © 2014 The Research Centre for Eco-Environmental Sciences, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved.

A Model of Regularization Parameter Determination in Low-Dose X-Ray CT Reconstruction Based on Dictionary Learning.

PubMed

Zhang, Cheng; Zhang, Tao; Zheng, Jian; Li, Ming; Lu, Yanfei; You, Jiali; Guan, Yihui

2015-01-01

In recent years, X-ray computed tomography (CT) is becoming widely used to reveal patient's anatomical information. However, the side effect of radiation, relating to genetic or cancerous diseases, has caused great public concern. The problem is how to minimize radiation dose significantly while maintaining image quality. As a practical application of compressed sensing theory, one category of methods takes total variation (TV) minimization as the sparse constraint, which makes it possible and effective to get a reconstruction image of high quality in the undersampling situation. On the other hand, a preliminary attempt of low-dose CT reconstruction based on dictionary learning seems to be another effective choice. But some critical parameters, such as the regularization parameter, cannot be determined by detecting datasets. In this paper, we propose a reweighted objective function that contributes to a numerical calculation model of the regularization parameter. A number of experiments demonstrate that this strategy performs well with better reconstruction images and saving of a large amount of time.

Sweet sixteen: changing time preferences in the transition from middle school to high school, for different scenarios.

PubMed

Lahav, Eyal; Shavit, Tal; Benzion, Uri

2015-01-01

Teenagers earn, save and spend large amounts of money. Therefore, understanding teenagers' time preference and how it affects their economic behavior is very important. The current study investigates time preferences of high school and middle school students, and the effect of different intertemporal choice scenarios on teenagers' subjective discount rate. One scenario used a standard intertemporal choice question while the other was a wage scenario. We found higher future orientation (lower subjective discount rate) among high school students than among middle school students when using a standard scenario but found no difference between groups in the wage scenario. For both groups, we found the subjective discount rates increased when the teenagers are asked to delay receipt of wages they earned by working (wage scenario). Other variables, like participation in sports and an allowance given by parents, were found to affect teenagers' time preferences. © Society for the Experimental Analysis of Behavior.

A Low-Cost and Energy-Efficient Multiprocessor System-on-Chip for UWB MAC Layer

NASA Astrophysics Data System (ADS)

Xiao, Hao; Isshiki, Tsuyoshi; Khan, Arif Ullah; Li, Dongju; Kunieda, Hiroaki; Nakase, Yuko; Kimura, Sadahiro

Ultra-wideband (UWB) technology has attracted much attention recently due to its high data rate and low emission power. Its media access control (MAC) protocol, WiMedia MAC, promises a lot of facilities for high-speed and high-quality wireless communication. However, these benefits in turn involve a large amount of computational load, which challenges the traditional uniprocessor architecture based implementation method to provide the required performance. However, the constrained cost and power budget, on the other hand, makes using commercial multiprocessor solutions unrealistic. In this paper, a low-cost and energy-efficient multiprocessor system-on-chip (MPSoC), which tackles at once the aspects of system design, software migration and hardware architecture, is presented for the implementation of UWB MAC layer. Experimental results show that the proposed MPSoC, based on four simple RISC processors and shared-memory infrastructure, achieves up to 45% performance improvement and 65% power saving, but takes 15% less area than the uniprocessor implementation.

Fast Adaptive Thermal Camouflage Based on Flexible VO₂/Graphene/CNT Thin Films.

PubMed

Xiao, Lin; Ma, He; Liu, Junku; Zhao, Wei; Jia, Yi; Zhao, Qiang; Liu, Kai; Wu, Yang; Wei, Yang; Fan, Shoushan; Jiang, Kaili

2015-12-09

Adaptive camouflage in thermal imaging, a form of cloaking technology capable of blending naturally into the surrounding environment, has been a great challenge in the past decades. Emissivity engineering for thermal camouflage is regarded as a more promising way compared to merely temperature controlling that has to dissipate a large amount of excessive heat. However, practical devices with an active modulation of emissivity have yet to be well explored. In this letter we demonstrate an active cloaking device capable of efficient thermal radiance control, which consists of a vanadium dioxide (VO2) layer, with a negative differential thermal emissivity, coated on a graphene/carbon nanotube (CNT) thin film. A slight joule heating drastically changes the emissivity of the device, achieving rapid switchable thermal camouflage with a low power consumption and excellent reliability. It is believed that this device will find wide applications not only in artificial systems for infrared camouflage or cloaking but also in energy-saving smart windows and thermo-optical modulators.

Layered Location-Based Security Mechanism for Mobile Sensor Networks: Moving Security Areas.

PubMed

Wang, Ze; Zhang, Haijuan; Wu, Luqiang; Zhou, Chang

2015-09-25

Network security is one of the most important issues in mobile sensor networks (MSNs). Networks are particularly vulnerable in hostile environments because of many factors, such as uncertain mobility, limitations on computation, and the need for storage in mobile nodes. Though some location-based security mechanisms can resist some malicious attacks, they are only suitable for static networks and may sometimes require large amounts of storage. To solve these problems, using location information, which is one of the most important properties in outdoor wireless networks, a security mechanism called a moving security area (MSA) is proposed to resist malicious attacks by using mobile nodes' dynamic location-based keys. The security mechanism is layered by performing different detection schemes inside or outside the MSA. The location-based private keys will be updated only at the appropriate moments, considering the balance of cost and security performance. By transferring parts of the detection tasks from ordinary nodes to the sink node, the memory requirements are distributed to different entities to save limited energy.

Neural Network Training by Integration of Adjoint Systems of Equations Forward in Time

NASA Technical Reports Server (NTRS)

Toomarian, Nikzad (Inventor); Barhen, Jacob (Inventor)

1999-01-01

A method and apparatus for supervised neural learning of time dependent trajectories exploits the concepts of adjoint operators to enable computation of the gradient of an objective functional with respect to the various parameters of the network architecture in a highly efficient manner. Specifically. it combines the advantage of dramatic reductions in computational complexity inherent in adjoint methods with the ability to solve two adjoint systems of equations together forward in time. Not only is a large amount of computation and storage saved. but the handling of real-time applications becomes also possible. The invention has been applied it to two examples of representative complexity which have recently been analyzed in the open literature and demonstrated that a circular trajectory can be learned in approximately 200 iterations compared to the 12000 reported in the literature. A figure eight trajectory was achieved in under 500 iterations compared to 20000 previously required. Tbc trajectories computed using our new method are much closer to the target trajectories than was reported in previous studies.

Neural network training by integration of adjoint systems of equations forward in time

NASA Technical Reports Server (NTRS)

Toomarian, Nikzad (Inventor); Barhen, Jacob (Inventor)

1992-01-01

A method and apparatus for supervised neural learning of time dependent trajectories exploits the concepts of adjoint operators to enable computation of the gradient of an objective functional with respect to the various parameters of the network architecture in a highly efficient manner. Specifically, it combines the advantage of dramatic reductions in computational complexity inherent in adjoint methods with the ability to solve two adjoint systems of equations together forward in time. Not only is a large amount of computation and storage saved, but the handling of real-time applications becomes also possible. The invention has been applied it to two examples of representative complexity which have recently been analyzed in the open literature and demonstrated that a circular trajectory can be learned in approximately 200 iterations compared to the 12000 reported in the literature. A figure eight trajectory was achieved in under 500 iterations compared to 20000 previously required. The trajectories computed using our new method are much closer to the target trajectories than was reported in previous studies.

Recovery of ammonia from swine manure using gas-permeable membranes: effect of aeration.

PubMed

García-González, M C; Vanotti, M B; Szogi, A A

2015-04-01

The gas-permeable membrane process can recover ammonia from manure, reducing pollution whilst converting ammonia into an ammonium salt fertilizer. The process involves manure pH control to increase ammonium (NH4(+)) recovery rate that is normally carried out using an alkali. In this study a new strategy to avoid the use of alkali was tested applying low-rate aeration and nitrification inhibition. The wastewater used was raw swine manure with 2390 mg NH4(+)-N/L. Results showed that aeration increased pH above 8.5 allowing quick transformation of NH4(+) into gaseous ammonia (NH3) and efficient recovery by permeation through the submerged membrane. The overall NH4(+) recovery obtained with aeration was 98% and ammonia emissions losses were less than 1.5%. The new approach can substitute large amounts of alkali chemicals needed to obtain high NH4(+) recovery with important economic and environmental savings. Copyright © 2015 Elsevier Ltd. All rights reserved.

Sealing ducts to save energy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Siuru, B.

1996-07-01

Large amounts of energy are wasted when heat leaks through ductwork located in uninsulated spaces. The Electric Power Research INstitute recently did a study that accurately measured these losses, then substantially reduced them by sealing the leaky ductwork. Six homes in the Pacific Northwest with significant duct leakage to the outside were selected for the study. The homes had electric resistance or heat pump, forced-air heating systems with a major portion of the supply and return ductwork in crawl spaces, attics, garages, etc. Measurements of duct leakage and heating system efficiency were done on all the homes before starting themore » duct sealing. Retrofitting included finding holes, gaps, cracks and disconnected joints in supply and return ducts as well as in plenums. When necessary, plenums were cut open for repairs. Leaks were sealed with Latex mastic and fiberglass tape. Outside ducts were covered or wrapped with insulation. Unducted returns were sealed with duct board. In some cases, leakage was corrected by merely reconnecting ducts and boots.« less

50% Advanced Energy Design Guides: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bonnema, E.; Leach, M.; Pless, S.

2012-07-01

This paper presents the process, methodology, and assumptions for the development of the 50% Energy Savings Advanced Energy Design Guides (AEDGs), a design guidance document that provides specific recommendations for achieving 50% energy savings above the requirements of ANSI/ASHRAE/IESNA Standard 90.1-2004 in four building types: (1) Small to medium office buildings, (2) K-12 school buildings, (3) Medium to big box retail buildings, (4) Large hospital buildings.

Building America Case Study: Performance of a Hot-Dry Climate Whole House Retrofit, Stockton, California (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

ARBI

2014-09-01

The Stockton house retrofit is a two-story tudor style single family deep retrofit in the hot-dry climate of Stockton, CA. The home is representative of a deep retrofit option of the scaled home energy upgrade packages offered to targeted neighborhoods under the pilot Large-Scale Retrofit Program (LSRP) administered by the Alliance for Residential Building Innovation (ARBI). Deep retrofit packages expand on the standard package by adding HVAC, water heater and window upgrades to the ducting, attic and floor insulation, domestic hot water insulation, envelope sealing, lighting and ventilation upgrades. Site energy savings with the deep retrofit were 23% compared tomore » the pre-retrofit case, and 15% higher than the savings estimated for the standard retrofit package. Energy savings were largely a result of the water heater upgrade, and a combination of the envelope sealing, insulation and HVAC upgrade. The HVAC system was of higher efficiency than the building code standard. Overall the financed retrofit would have been more cost effective had a less expensive HVAC system been selected and barriers to wall insulation remedied. The homeowner experienced improved comfort throughout the monitored period and was satisfied with the resulting utility bill savings.« less

The Impact of Rate Design and Net Metering on the Bill Savings from Distributed PV for Residential Customers in California

DOE Office of Scientific and Technical Information (OSTI.GOV)

Energy and Resources Group, University of California, Berkeley; Darghouth, Naim R.; Barbose, Galen

2011-06-01

Net metering has become a widespread mechanism in the U.S. for supporting customer adoption of distributed photovoltaics (PV), but has faced challenges as PV installations grow to a larger share of generation in a number of states. This paper examines the value of the bill savings that customers receive under net metering, and the associated role of retail rate design, based on a sample of approximately two hundred residential customers of California's two largest electric utilities. We find that the bill savings per kWh of PV electricity generated varies by more than a factor of four across the customers inmore » the sample, which is largely attributable to the inclining block structure of the utilities' residential retail rates. We also compare the bill savings under net metering to that received under three potential alternative compensation mechanisms, based on California's Market Price Referent (MPR). We find that net metering provides significantly greater bill savings than a full MPR-based feed-in tariff, but only modestly greater savings than alternative mechanisms under which hourly or monthly net excess generation is compensated at the MPR rate.« less

Beyond Widgets -- Systems Incentive Programs for Utilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Regnier, Cindy; Mathew, Paul; Robinson, Alastair

Utility incentive programs remain one of the most significant means of deploying commercialized, but underutilized building technologies to scale. However, these programs have been largely limited to component-based products (e.g., lamps, RTUs). While some utilities do provide ‘custom’ incentive programs with whole building and system level technical assistance, these programs require deeper levels of analysis, resulting in higher program costs. This results in custom programs being restricted to utilities with greater resources, and are typically applied mainly to large or energy-intensive facilities, leaving much of the market without cost effective access and incentives for these solutions. In addition, with increasinglymore » stringent energy codes, cost effective component-based solutions that achieve significant savings are dwindling. Building systems (e.g., integrated façade, HVAC and/or lighting solutions) can deliver higher savings that translate into large sector-wide savings if deployed at the scale of these programs. However, systems application poses a number of challenges – baseline energy use must be defined and measured; the metrics for energy and performance must be defined and tested against; in addition, system savings must be validated under well understood conditions. This paper presents a sample of findings of a project to develop validated utility incentive program packages for three specific integrated building systems, in collaboration with Xcel Energy (CO, MN), ComEd, and a consortium of California Public Owned Utilities (CA POUs) (Northern California Power Agency(NCPA) and the Southern California Public Power Authority(SCPPA)). Furthermore, these program packages consist of system specifications, system performance, M&V protocols, streamlined assessment methods, market assessment and implementation guidance.« less

Randomized, controlled pilot study comparing large-volume paracentesis using wall suction and traditional glass vacuum bottle methods.

PubMed

Konerman, Monica A; Price, Jennifer; Torres, Dawn; Li, Zhiping

2014-09-01

Large-volume paracentesis (LVP) can be time and labor intensive depending on the amount of ascites removed and the method of drainage. Wall suction has been adopted as the preferred method of drainage at many centers, though the safety and benefits of this technique have not been formally evaluated. The primary objective of this study was to define the cost and time savings of wall suction over the traditional glass vacuum bottle method for ascites drainage. The secondary objective was to compare the safety profile and patient satisfaction using these two techniques. We conducted a randomized, controlled pilot study of the wall suction versus vacuum bottle methods for LVP in hospitalized patients. All LVPs were performed under ultrasound guidance by a single proceduralist. Patients with at least 4 liters removed received 25% intravenous albumin, 8 g/liter fluid removed. Demographic, clinical characteristics, and procedure details were recorded. Laboratory and hemodynamic data were recorded for 24 h prior to and 24-48 h post LVP. An electronic chart review was conducted to evaluate procedure-related complications. Data were compared using Fisher's exact test, t test, or Mann-Whitney U test. Thirty-four patients were randomized to wall suction at 200 mmHg (n = 17) or glass vacuum bottle drainage (n = 17). Wall suction was significantly faster and less costly than vacuum bottle drainage (7 versus 15 min, p = 0.002; $4.59 versus $12.73, p < 0.001). There were no differences in outcomes at 24 and 48 h post LVP, or at 60-day follow up. Performing LVP using wall suction resulted in significantly shorter procedure time and supply cost savings. There were no differences in outcomes between the groups, suggesting equivalent safety, though larger studies powered to detect small differences are needed. Given its efficiency, convenience, and cost effectiveness, wall suction may be a superior method of ascites drainage for LVP.

Life cycle environmental evaluation of kettles: Recommendations for the development of eco-design regulations in the European Union.

PubMed

Gallego-Schmid, Alejandro; Jeswani, Harish Kumar; Mendoza, Joan Manuel F; Azapagic, Adisa

2018-06-01

Between 117 and 200 million kettles are used in the European Union (EU) every year. However, the full environmental impacts of kettles remain largely unknown. This paper presents a comprehensive life cycle assessment of conventional plastic and metallic kettles in comparison with eco-kettles. The results show that the use stage contributes 80% to the impacts. For this reason, the eco-kettle has over 30% lower environmental impacts due to a greater water efficiency and related lower energy consumption. These results have been extrapolated to the EU level to consider the implications for proposed eco-design regulations. For these purposes, the effects on the impacts of durability of kettles and improvements in their energy and water efficiency have been assessed as they have been identified as two key parameters in the proposed regulations. The results suggest that increasing the current average durability from 4.4 to seven years would reduce the impacts by less than 5%. Thus, improving durability is not a key issue for improving the environmental performance of kettles and does not justify the need for an eco-design regulation based exclusively on it. However, improvements in water and energy efficiency through eco-design can bring relevant environmental savings. Boiling the exact amount of water needed would reduce the impacts by around a third and using water temperature control by further 2%-5%. The study has also considered the effects of reducing significantly the number of kettles in use after the UK (large user of kettles) leaves the EU and reducing the excess water typically boiled by the consumer. Even under these circumstances, the environmental savings justify the development of a specific EU eco-design regulation for kettles. However, consumer engagement will be key to the implementation and achievement of the expected environmental benefits. Copyright © 2017 Elsevier B.V. All rights reserved.

The practical application of adaptive study design in early phase clinical trials: a retrospective analysis of time savings.

PubMed

Lorch, U; Berelowitz, K; Ozen, C; Naseem, A; Akuffo, E; Taubel, J

2012-05-01

The interest in adaptive study design is evident from the growing amount of clinical research employing this model in the mid to later stages of medicines development. Little has been published on the practical application and merits of adaptive study design in early phase clinical research. This paper describes a retrospective analysis performed on a sample of 29 industry lead adaptive early phase studies commencing between 1 January 2006 and 31 December 2010 in a clinical trials unit in London, England. All studies containing at least one adaptive feature in the original protocol were included in the analysis. The scope of the analysis was to assess whether the use of adaptive study designs provided tangible benefits over the use of conventional study designs using time savings as the main measure. We conclude that the use of adaptive study design saves time in early phase research programs. This is achieved by abolishing the need for substantial amendments or by mitigating their impact on timelines and by using adaptive scheduling efficiencies.

Multiple Power-Saving MSSs Scheduling Methods for IEEE802.16e Broadband Wireless Networks

PubMed Central

2014-01-01

This work proposes two enhanced multiple mobile subscriber stations (MSSs) power-saving scheduling methods for IEEE802.16e broadband wireless networks. The proposed methods are designed for the Unsolicited Grant Service (UGS) of IEEE802.16e. To reduce the active periods of all power-saving MSSs, the base station (BS) allocates each MSS fewest possible transmission frames to retrieve its data from the BS. The BS interlaces the active periods of each MSS to increase the amount of scheduled MSSs and splits the overflowing transmission frames to maximize the bandwidth utilization. Simulation results reveal that interlacing the active periods of MSSs can increase the number of scheduled MSSs to more than four times of that in the Direct scheduling method. The bandwidth utilization can thus be improved by 60%–70%. Splitting the overflowing transmission frames can improve bandwidth utilization by more than 10% over that achieved using the method of interlacing active periods, with a sacrifice of only 1% of the sleep periods in the interlacing active period method. PMID:24523656

Commercial Internet Adoption in China: Comparing the Experience of Small, Medium and Large Businesses.

ERIC Educational Resources Information Center

Riquelme, Hernan

2002-01-01

Describes a study of small, medium, and large enterprises in Shanghai, China that investigated which size companies benefit the most from the Internet. Highlights include leveling the ground for small and medium enterprises (SMEs); increased sales and cost savings for large companies; and competitive advantages. (LRW)

A novel method to reduce time investment when processing videos from camera trap studies.

PubMed

Swinnen, Kristijn R R; Reijniers, Jonas; Breno, Matteo; Leirs, Herwig

2014-01-01

Camera traps have proven very useful in ecological, conservation and behavioral research. Camera traps non-invasively record presence and behavior of animals in their natural environment. Since the introduction of digital cameras, large amounts of data can be stored. Unfortunately, processing protocols did not evolve as fast as the technical capabilities of the cameras. We used camera traps to record videos of Eurasian beavers (Castor fiber). However, a large number of recordings did not contain the target species, but instead empty recordings or other species (together non-target recordings), making the removal of these recordings unacceptably time consuming. In this paper we propose a method to partially eliminate non-target recordings without having to watch the recordings, in order to reduce workload. Discrimination between recordings of target species and non-target recordings was based on detecting variation (changes in pixel values from frame to frame) in the recordings. Because of the size of the target species, we supposed that recordings with the target species contain on average much more movements than non-target recordings. Two different filter methods were tested and compared. We show that a partial discrimination can be made between target and non-target recordings based on variation in pixel values and that environmental conditions and filter methods influence the amount of non-target recordings that can be identified and discarded. By allowing a loss of 5% to 20% of recordings containing the target species, in ideal circumstances, 53% to 76% of non-target recordings can be identified and discarded. We conclude that adding an extra processing step in the camera trap protocol can result in large time savings. Since we are convinced that the use of camera traps will become increasingly important in the future, this filter method can benefit many researchers, using it in different contexts across the globe, on both videos and photographs.

NEMO: Extraction and normalization of organization names from PubMed affiliations.

PubMed

Jonnalagadda, Siddhartha Reddy; Topham, Philip

2010-10-04

Today, there are more than 18 million articles related to biomedical research indexed in MEDLINE, and information derived from them could be used effectively to save the great amount of time and resources spent by government agencies in understanding the scientific landscape, including key opinion leaders and centers of excellence. Associating biomedical articles with organization names could significantly benefit the pharmaceutical marketing industry, health care funding agencies and public health officials and be useful for other scientists in normalizing author names, automatically creating citations, indexing articles and identifying potential resources or collaborators. Large amount of extracted information helps in disambiguating organization names using machine-learning algorithms. We propose NEMO, a system for extracting organization names in the affiliation and normalizing them to a canonical organization name. Our parsing process involves multi-layered rule matching with multiple dictionaries. The system achieves more than 98% f-score in extracting organization names. Our process of normalization that involves clustering based on local sequence alignment metrics and local learning based on finding connected components. A high precision was also observed in normalization. NEMO is the missing link in associating each biomedical paper and its authors to an organization name in its canonical form and the Geopolitical location of the organization. This research could potentially help in analyzing large social networks of organizations for landscaping a particular topic, improving performance of author disambiguation, adding weak links in the co-author network of authors, augmenting NLM's MARS system for correcting errors in OCR output of affiliation field, and automatically indexing the PubMed citations with the normalized organization name and country. Our system is available as a graphical user interface available for download along with this paper.

The TSX Gives a Short Course in Health Economics: It's the Prices, Stupid!

PubMed Central

Evans, Robert G.

2010-01-01

The fall in Shoppers Drug Mart shares last April 8 gave a crystal-clear demonstration of the link between health expenditures and health incomes. Reacting (finally) to the excessive retail prices of generic drugs, the Ontario government effectively halved the rate of reimbursement of ingredient costs and banned the “professional allowances” (kickbacks) paid to pharmacies by generic manufacturers. Taxpayers and private payers will save hundreds of millions of dollars, and pharmacy revenues will fall by an equivalent amount. Patients will still get their drugs, with no loss of quantity, quality or even convenience; no one's health is threatened. But investor profits will fall. There are similar savings opportunities throughout the health system. Health costs are primarily a political, not an economic, problem. PMID:22043220

Potential benefits of a ceramic thermal barrier coating on large power generation gas turbine

NASA Technical Reports Server (NTRS)

Clark, J. S.; Nainiger, J. J.

1977-01-01

Thermal barrier coating design option offers benefit in terms of reduced electricity costs when used in utility gas turbines. Options considered include: increased firing temperature, increased component life, reduced cooling air requirements, and increased corrosion resistance (resulting in increased tolerance for dirty fuels). Performance and cost data were obtained. Simple, recuperated and combined cycle applications were considered, and distillate and residual fuels were assumed. The results indicate that thermal barrier coatings could produce large electricity cost savings if these coatings permit turbine operation with residual fuels at distillate-rated firing temperatures. The results also show that increased turbine inlet temperature can result in substantial savings in fuel and capital costs.

Costs and benefits of influenza vaccination and work productivity in a Colombian company from the employer's perspective.

PubMed

Morales, Alvaro; Martinez, Maria M; Tasset-Tisseau, Anne; Rey, Elena; Baron-Papillon, Florence; Follet, Alain

2004-01-01

This study was designed to evaluate the effects of an employee influenza vaccination campaign, measured in terms of health and economic benefits. Colombian bank employees volunteered to take part in this prospective observational study involving two groups: vaccinated and nonvaccinated. Socioeconomic and health status information, including influenza-like symptoms, sick leave, and postvaccination adverse events, were collected via questionnaires. Cost-benefit analyses were performed to determine whether the employer would save money overall by paying for the vaccination program. Between October 2000 and May 2001, 424 vaccinated subjects and 335 nonvaccinated subjects volunteered to join the study. Cumulative incidence of influenza-like illness (ILI) was lower among vaccinated (14.6%) than nonvaccinated subjects (39.4%). Fever was the most common ILI symptom (93% of all reported ILI). Absence rates because of ILI were similar in the two groups (2.59%-2.69%). Assuming that employees with ILI who continue to work have reduced effectiveness (30%-70% of normal) the employer can save 6.4 US dollars to 25.8 US dollars per vaccinated employee based on labor costs alone. This saving increases to 89.3 US dollars to 237.8 US dollars when operating income is also considered. Sensitivity analyses indicate that the vaccination program will be cost saving for vaccination coverage above 20% and ILI rates above 10%. Among the studied volunteers, ILI has significant impact on work productivity in terms of indirect costs. Implementing an influenza vaccination program would reduce the burden of ILI and save substantial amounts of money for the company.

Application of Energy Integration Techniques to the Design of Advanced Life Support Systems

NASA Technical Reports Server (NTRS)

Levri, Julie; Finn, Cory

2000-01-01

Exchanging heat between hot and cold streams within an advanced life support system can save energy. This savings will reduce the equivalent system mass (ESM) of the system. Different system configurations are examined under steady-state conditions for various percentages of food growth and waste treatment. The scenarios investigated represent possible design options for a Mars reference mission. Reference mission definitions are drawn from the ALSS Modeling and Analysis Reference Missions Document, which includes definitions for space station evolution, Mars landers, and a Mars base. For each scenario, streams requiring heating or cooling are identified and characterized by mass flow, supply and target temperatures and heat capacities. The Pinch Technique is applied to identify good matches for energy exchange between the hot and cold streams and to calculate the minimum external heating and cooling requirements for the system. For each pair of hot and cold streams that are matched, there will be a reduction in the amount of external heating and cooling required, and the original heating and cooling equipment will be replaced with a heat exchanger. The net cost savings can be either positive or negative for each stream pairing, and the priority for implementing each pairing can be ranked according to its potential cost savings. Using the Pinch technique, a complete system heat exchange network is developed and heat exchangers are sized to allow for calculation of ESM. The energy-integrated design typically has a lower total ESM than the original design with no energy integration. A comparison of ESM savings in each of the scenarios is made to direct future Pinch Analysis efforts.

31 CFR 351.67 - What happens if any person purchases book-entry Series EE savings bonds in excess of the maximum...

Code of Federal Regulations, 2010 CFR

2010-07-01

... bonds in excess of the maximum annual amount? We reserve the right to take any action we deem necessary to adjust the excess, including the right to remove the excess bonds from your New Treasury Direct account and refund the payment price to your bank account of record using the ACH method of payment. ...

Tooling Converts Stock Bearings To Custom Bearings

NASA Technical Reports Server (NTRS)

Fleenor, E. N., Jr.

1983-01-01

Technique for reworking stock bearings saves time and produces helicopter-rotor bearings ground more precisely. Split tapered ring at one end of threaded bolt expands to hold inside of inner race bearing assembly; nut, at other end of bolt, adjusts amount of spring tension. Piece of hardware grasps bearing firmly without interfering with grinding operation. Operation produces bearing of higher quality than commercially available bearings.

Combat Trauma -- Placing Surgeons to Save the Most Lives

DTIC Science & Technology

2007-11-06

principles, and contradicts common beliefs passed down through generations of military personnel. The approach is to first discuss the...to get the patient to the right care in the shortest amount of time. For example, taking a patient with penetrating head trauma to a general ...The volume and synergy facilitate good outcomes and develop future generations of combat surgeons. Another counter intuitive concept of

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mittal, Sparsh; Zhang, Zhao; Vetter, Jeffrey S

Recent trends of CMOS scaling and use of large last level caches (LLCs) have led to significant increase in the leakage energy consumption of LLCs and hence, managing their energy consumption has become extremely important in modern processor design. The conventional cache energy saving techniques require offline profiling or provide only coarse granularity of cache allocation. We present FlexiWay, a cache energy saving technique which uses dynamic cache reconfiguration. FlexiWay logically divides the cache sets into multiple (e.g. 16) modules and dynamically turns off suitable and possibly different number of cache ways in each module. FlexiWay has very small implementationmore » overhead and it provides fine-grain cache allocation even with caches of typical associativity, e.g. an 8-way cache. Microarchitectural simulations have been performed using an x86-64 simulator and workloads from SPEC2006 suite. Also, FlexiWay has been compared with two conventional energy saving techniques. The results show that FlexiWay provides largest energy saving and incurs only small loss in performance. For single, dual and quad core systems, the average energy saving using FlexiWay are 26.2%, 25.7% and 22.4%, respectively.« less

After-hours power status of office equipment and energy use of miscellaneous plug-load equipment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roberson, Judy A.; Webber, Carrie A.; McWhinney, Marla C.

2004-05-27

This research was conducted in support of two branches of the EPA ENERGY STAR program, whose overall goal is to reduce, through voluntary market-based means, the amount of carbon dioxide emitted in the U.S. The primary objective was to collect data for the ENERGY STAR Office Equipment program on the after-hours power state of computers, monitors, printers, copiers, scanners, fax machines, and multi-function devices. We also collected data for the ENERGY STAR Commercial Buildings branch on the types and amounts of miscellaneous plug-load equipment, a significant and growing end use that is not usually accounted for by building energy managers.more » For most types of miscellaneous equipment, we also estimated typical unit energy consumption in order to estimate total energy consumption of the miscellaneous devices within our sample. This data set is the first of its kind that we know of, and is an important first step in characterizing miscellaneous plug loads in commercial buildings. The main purpose of this study is to supplement and update previous data we collected on the extent to which electronic office equipment is turned off or automatically enters a low power state when not in active use. In addition, it provides data on numbers and types of office equipment, and helps identify trends in office equipment usage patterns. These data improve our estimates of typical unit energy consumption and savings for each equipment type, and enables the ENERGY STAR Office Equipment program to focus future effort on products with the highest energy savings potential. This study expands our previous sample of office buildings in California and Washington DC to include education and health care facilities, and buildings in other states. We report data from sixteen commercial buildings in California, Georgia, and Pennsylvania: four education buildings, two medical buildings, two large offices (> 500 employees each), three medium offices (50-500 employees each), and five small business offices (< 50 employees each). Two buildings are in the San Francisco Bay are a of California, nine (including the five small businesses) are in Pittsburgh, Pennsylvania, and five are in Atlanta, Georgia.« less

A real-time regional adaptive exposure method for saving dose-area product in x-ray fluoroscopy

PubMed Central

Burion, Steve; Speidel, Michael A.; Funk, Tobias

2013-01-01

Purpose: Reduction of radiation dose in x-ray imaging has been recognized as a high priority in the medical community. Here the authors show that a regional adaptive exposure method can reduce dose-area product (DAP) in x-ray fluoroscopy. The authors' method is particularly geared toward providing dose savings for the pediatric population. Methods: The scanning beam digital x-ray system uses a large-area x-ray source with 8000 focal spots in combination with a small photon-counting detector. An imaging frame is obtained by acquiring and reconstructing up to 8000 detector images, each viewing only a small portion of the patient. Regional adaptive exposure was implemented by varying the exposure of the detector images depending on the local opacity of the object. A family of phantoms ranging in size from infant to obese adult was imaged in anteroposterior view with and without adaptive exposure. The DAP delivered to each phantom was measured in each case, and noise performance was compared by generating noise arrays to represent regional noise in the images. These noise arrays were generated by dividing the image into regions of about 6 mm2, calculating the relative noise in each region, and placing the relative noise value of each region in a one-dimensional array (noise array) sorted from highest to lowest. Dose-area product savings were calculated as the difference between the ratio of DAP with adaptive exposure to DAP without adaptive exposure. The authors modified this value by a correction factor that matches the noise arrays where relative noise is the highest to report a final dose-area product savings. Results: The average dose-area product saving across the phantom family was (42 ± 8)% with the highest dose-area product saving in the child-sized phantom (50%) and the lowest in the phantom mimicking an obese adult (23%). Conclusions: Phantom measurements indicate that a regional adaptive exposure method can produce large DAP savings without compromising the noise performance in the image regions with highest noise. PMID:23635281

The economic benefits of reducing cardiovascular disease mortality in Quebec, Canada.

PubMed

Boisclair, David; Décarie, Yann; Laliberté-Auger, François; Michaud, Pierre-Carl; Vincent, Carole

2018-01-01

We assess how different scenarios of cardiovascular disease (CVD) prevention, aimed at meeting targets set by the World Health Organization (WHO) for 2025), may impact healthcare spending in Quebec, Canada over the 2050 horizon. We provide long-term forecasts of healthcare use and costs at the Quebec population level using a novel dynamic microsimulation model. Using both survey and administrative data, we simulate the evolution of the Quebec population's health status until death, through a series of dynamic transitions that accounts for social and demographic characteristics associated with CVD risk factors. A 25% reduction in CVD mortality between 2012 and 2025 achieved through decreased incidence could contain the pace of healthcare cost growth towards 2050 by nearly 7 percentage points for consultations with a physician, and by almost 9 percentage points for hospitalizations. Over the 2012-2050 period, the present value of cost savings is projected to amount to C$13.1 billion in 2012 dollars. The years of life saved due to improved life expectancy could be worth another C$38.2 billion. Addressing CVD mortality directly instead would bring about higher healthcare costs, but would generate more value in terms of years of life saved, at C$69.6 billion. Potential savings associated with plausible reductions in CVD, aimed at reaching a World Health Organization target over a 12-year period, are sizeable and may help address challenges associated with an aging population.

Fabrication and characterization of Aerogel-Polydimethyl siloxane (PDMS) Insulation Film

NASA Astrophysics Data System (ADS)

Noh, Yeoung ah; Song, Sinae; Taik Kim, Hee

2018-03-01

The building has a large impact on the space heating demand and the indoor environment is affected by climate or daylight. Hence, silica aerogel has generally used as a film to reduce the coefficient of the window in the building. Silica aerogel is a suitable material to apply for insulation material with lower thermal conductivity than that of air to save interior energy. However expensive precursor and drying process were the main issue of the silica aerogel synthesis and practical usage. We attempt to fabricate aerogel insulation film for energy saving through the economic process under ambient pressure. Silica aerogel was synthesized from rice husk ash, which was an agricultural waste to be able to recycle. Taguchi design was used to optimize the parameters (amount of rice husk ash, pH, aging time) controlling the surface area of silica aerogel. The silica aerogel is prepared by sol-gel processing through acidic treatment and aging. The silica aerogel was obtained by modification of silica hydrogel surface and dry at ambient pressure. Finally, aerogel film was respectively fabricated by the different content of aerogel in polydimethylsiloxane (PDMS). Silica aerogel obtained 21 – 24nm average particle size was analyzed by SEM and silica aerogel with high surface area (832.26 m2/g), pore size ( 3.30nm ) was characterized by BET. Then silica Aerogel – PDMS insulation film with thermal conductivity (0.002 W/mK) was analyzed by thermal wave system. The study demonstrates an eco-friendly and low-cost route toward silica – PDMS insulation film with low thermal conductivity (0.002 W/mK).

Return-to-work intervention for cancer survivors: budget impact and allocation of costs and returns in the Netherlands and six major EU-countries.

PubMed

Mewes, Janne C; Steuten, Lotte M G; Groeneveld, Iris F; de Boer, Angela G E M; Frings-Dresen, Monique H W; IJzerman, Maarten J; van Harten, Wim H

2015-11-12

Return-to-work (RTW)-interventions support cancer survivors in resuming work, but come at additional healthcare costs. The objective of this study was to assess the budget impact of a RTW-intervention, consisting of counselling sessions with an occupational physician and an exercise-programme. The secondary objective was to explore how the costs of RTW-interventions and its financial revenues are allocated among the involved stakeholders in several EU-countries. The budget impact (BI) of a RTW-intervention versus usual care was analysed yearly for 2015-2020 from a Dutch societal- and from the perspective of a large cancer centre. The allocation of the expected costs and financial benefits for each of the stakeholders involved was compared between the Netherlands, Belgium, England, France, Germany, Italy, and Sweden. The average intervention costs in this case were €1,519/patient. The BI for the Netherlands was €-14.7 m in 2015, rising to €-71.1 m in 2020, thus the intervention is cost-saving as the productivity benefits outweigh the intervention costs. For cancer centres the BI amounts to €293 k in 2015, increasing to €1.1 m in 2020. Across European countries, we observed differences regarding the extent to which stakeholders either invest or receive a share of the benefits from offering a RTW-intervention. The RTW-intervention is cost-saving from a societal perspective. Yet, the total intervention costs are considerable and, in many European countries, mainly covered by care providers that are not sufficiently reimbursed.

Pilot test of Pickliq{reg_sign} process to determine energy and environmental benefits & economic feasibility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Olsen, D.R.

Green Technology Group (GTG) was awarded Grant No. DE-FG01-96EE 15657 in the amount of $99,904 for a project to advance GTG`s Pickliq{reg_sign} Process in the Copper and Steel Industries. The use of the Pickliq{reg_sign} Process can significantly reduce the production of waste acids containing metal salts. The Pickliq{reg_sign} Process can save energy and eliminate hazardous waste in a typical copper rod or wire mill or a typical steel wire mill. The objective of this pilot project was to determine the magnitude of the economic, energy and environmental benefits of the Pickliq{reg_sign} Process in two applications within the metal processing industry.more » The effectiveness of the process has already been demonstrated at facilities cleaning iron and steel with sulfuric acid. 9207 companies are reported to use sulfuric and hydrochloric acid in the USA. The USEPA TRI statistics of acid not recycled in the US is 2.4 x 10{sup 9} lbs (net) for Hydrochloric Acid and 2.0 x 10{sup 9} lbs (net) for Sulfuric Acid. The energy cost of not reclaiming acid is 10.7 x 10{sup 6} BTU/ton for Hydrochloric Acid and 21.6 x 10{sup 6} BTU/Ton for Sulfuric Acid. This means that there is a very large market for the application of the Pickliq{reg_sign} Process and the widespread use of the process will bring significant world wide savings of energy to the environment.« less

Two stage hydrolysis of corn stover at high solids content for mixing power saving and scale-up applications.

PubMed

Liu, Ke; Zhang, Jian; Bao, Jie

2015-11-01

A two stage hydrolysis of corn stover was designed to solve the difficulties between sufficient mixing at high solids content and high power input encountered in large scale bioreactors. The process starts with the quick liquefaction to convert solid cellulose to liquid slurry with strong mixing in small reactors, then followed the comprehensive hydrolysis to complete saccharification into fermentable sugars in large reactors without agitation apparatus. 60% of the mixing energy consumption was saved by removing the mixing apparatus in large scale vessels. Scale-up ratio was small for the first step hydrolysis reactors because of the reduced reactor volume. For large saccharification reactors in the second step, the scale-up was easy because of no mixing mechanism was involved. This two stage hydrolysis is applicable for either simple hydrolysis or combined fermentation processes. The method provided a practical process option for industrial scale biorefinery processing of lignocellulose biomass. Copyright © 2015 Elsevier Ltd. All rights reserved.

Interior and Exterior Low-E Storm Window Installation

ScienceCinema

Witters, Sarah

2018-01-16

Until recently, energy-efficient window retrofit options have largely been limited to repair or replacement; leaving the homeowner to decide between affordability and deeper energy savings. A new and improved low-e storm window boasts a combination of curb appeal and energy efficiency, all for a fraction of the cost of window replacement. A recent whole-home experiment performed by PNNL suggests that attaching low-e storm windows can result in as much energy savings replacing the windows.

USAF Logistics Process Optimization Study for the Aircraft Asset Sustainment Process. Volume 1.

DTIC Science & Technology

1998-12-31

solely to have a record that could be matched with the CMOS receipt data. (This problem is caused by DLA systems that currently do not populate CMOS with...unable to obtain passwords to the Depot D035 systems. Figure 16 shows daily savings as of 30 September 1998 (current time frame ) and projects savings...Engineering, modeling, and systems/software development company LAN Local Area Network LFA Large Frame Aircraft LMA Logistics Management Agency LMR

Effect of electron beam irradiation on bacterial and Ascaris ova loads and volatile organic compounds in municipal sewage sludge

NASA Astrophysics Data System (ADS)

Engohang-Ndong, Jean; Uribe, R. M.; Gregory, Roger; Gangoda, Mahinda; Nickelsen, Mike G.; Loar, Philip

2015-07-01

Wastewater treatment plants produce large amounts of biosolids that can be utilized for land applications. However, prior to their use, these biosolids must be treated to eliminate risks of infections and to reduce upsetting odors. In this study, microbiological and chemical analyzes were performed before and after treatment of sewage sludge with 3 MeV of an electron beam accelerator in a pilot processing plant. Thus, we determined that dose 4.5 kGy was required to reduce fecal coliform counts to safe levels for land applications of sludge while, 14.5 kGy was necessary to decrease Ascaris ova counts to safe levels. Furthermore, at low doses, electron beam irradiation showed little effect on the concentrations of volatile organic compounds, while some increase were recorded at high doses. The concentration of dimethyl sulfide was reduced by 50-70% at irradiation doses of 25.7 kGy and 30.7 kGy respectively. By contrast, electron beam irradiation increased dimethyl disulfide concentrations. We also showed that electron beam treatment was less energy-consuming with shorter processing times than conventional techniques used to decontaminate sludge. Hence opening new avenues for large urban agglomerations to save money and time when treating biosolids for land application.

Building energy information systems: Synthesis of costs, savings, and best-practice uses

DOE PAGES

Granderson, Jessica; Lin, Guanjing

2016-02-19

Building energy information systems (EIS) are a powerful customer-facing monitoring and analytical technology that can enable up to 20% site energy savings for buildings. Few technologies are as heavily marketed, but in spite of their potential, EIS remain an under-adopted emerging technology. One reason is the lack of information on purchase costs and associated energy savings. While insightful, the growing body of individual case studies has not provided industry the information needed to establish the business case for investment. Vastly different energy and economic metrics prevent generalizable conclusions. This paper addresses three common questions concerning EIS use: what are themore » costs, what have users saved, and which best practices drive deeper savings? We present a large-scale assessment of the value proposition for EIS use based on data from over two-dozen organizations. Participants achieved year-over-year median site and portfolio savings of 17% and 8%, respectively; they reported that this performance would not have been possible without the EIS. The median five-year cost of EIS software ownership (up-front and ongoing costs) was calculated to be $1,800 per monitoring point (kilowatt meter points were most common), with a median portfolio-wide implementation size of approximately 200 points. In this paper, we present an analysis of the relationship between key implementation factors and achieved energy reductions. Extent of efficiency projects, building energy performance prior to EIS installation, depth of metering, and duration of EIS were strongly correlated with greater savings. As a result, we also identify the best practices use of EIS associated with greater energy savings.« less

Building energy information systems: Synthesis of costs, savings, and best-practice uses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Granderson, Jessica; Lin, Guanjing

Building energy information systems (EIS) are a powerful customer-facing monitoring and analytical technology that can enable up to 20% site energy savings for buildings. Few technologies are as heavily marketed, but in spite of their potential, EIS remain an under-adopted emerging technology. One reason is the lack of information on purchase costs and associated energy savings. While insightful, the growing body of individual case studies has not provided industry the information needed to establish the business case for investment. Vastly different energy and economic metrics prevent generalizable conclusions. This paper addresses three common questions concerning EIS use: what are themore » costs, what have users saved, and which best practices drive deeper savings? We present a large-scale assessment of the value proposition for EIS use based on data from over two-dozen organizations. Participants achieved year-over-year median site and portfolio savings of 17% and 8%, respectively; they reported that this performance would not have been possible without the EIS. The median five-year cost of EIS software ownership (up-front and ongoing costs) was calculated to be $1,800 per monitoring point (kilowatt meter points were most common), with a median portfolio-wide implementation size of approximately 200 points. In this paper, we present an analysis of the relationship between key implementation factors and achieved energy reductions. Extent of efficiency projects, building energy performance prior to EIS installation, depth of metering, and duration of EIS were strongly correlated with greater savings. As a result, we also identify the best practices use of EIS associated with greater energy savings.« less

More efficient irrigation may compensate for increases in irrigation water requirements due to climate change in the Mediterranean area

NASA Astrophysics Data System (ADS)

Fader, Marianela; Shi, Sinan; von Bloh, Werner; Bondeau, Alberte; Cramer, Wolfgang

2017-04-01

Irrigation in the Mediterranean is of vital importance for food security, employment and economic development. We will present a recently published study1 that estimates the current level of water demand for Mediterranean agriculture and simulates the potential impacts of climate change, population growth and transitions to water-saving irrigation and conveyance technologies. The results indicate that, at present, Mediterranean region could save 35% of water by implementing more efficient irrigation and conveyance systems, with large differences in the saving potentials across countries. Under climate change, more efficient irrigation is of vital importance for counteracting increases in irrigation water requirements. The Mediterranean area as a whole might face an increase in gross irrigation requirements between 4% and 18% from climate change alone by the end of the century if irrigation systems and conveyance are not improved. Population growth increases these numbers to 22% and 74%, respectively, affecting mainly the Southern and Eastern Mediterranean. However, improved irrigation technologies and conveyance systems have large water saving potentials, especially in the Eastern Mediterranean. Both the Eastern and the Southern Mediterranean would need around 35% more water than today if they could afford some degree of modernization of irrigation and conveyance systems and benefit from the CO2-fertilization effect. However, in some scenarios water scarcity may constrain the supply of the irrigation water needed in future in Algeria, Libya, Israel, Jordan, Lebanon, Syria, Serbia, Morocco, Tunisia and Spain. In this study, vegetation growth, phenology, agricultural production and irrigation water requirements and withdrawal were simulated with the process-based ecohydrological and agro-ecosystem model LPJmL ("Lund-Potsdam-Jena managed Land") after a large development2 that comprised the improved representation of Mediterranean crops.

The Cost Effectiveness of Embedding a Behavioral Health Clinician into an Existing Primary Care Practice to Facilitate the Integration of Care: A Prospective, Case-Control Program Evaluation.

PubMed

Ross, Kaile M; Klein, Betsy; Ferro, Katherine; McQueeney, Debra A; Gernon, Rebecca; Miller, Benjamin F

2018-04-30

This project evaluated the cost effectiveness of integrating behavioral health services into a primary care practice using a prospective, case-control design. New Directions Behavioral Health collaborated with a large Kansas City primary care practice to integrate a licensed psychologist (i.e., behavioral health clinician) into the practice. Patient claims data were examined 21 months prior to and 14 months after the psychologist began providing full-time behavioral health services within the practice. Claims data from patients with Blue Cross Blue Shield of Kansas City insurance (BCBSKC) who had at least one encounter with the psychologist (N = 239) were compared to control patients (BCBSKC fully insured patients at large) to calculate cost savings. The results demonstrated that integrating behavioral health services into the practice was associated with $860.16 per member per year savings or 10.8% savings in costs for BCBSKC patients. Integrating behavioral health services into primary care may lead to reductions in health care costs.

Fuel savings and emissions reductions from light duty fuel cell vehicles

NASA Astrophysics Data System (ADS)

Mark, J.; Ohi, J. M.; Hudson, D. V., Jr.

1994-04-01

Fuel cell vehicles (FCV's) operate efficiently, emit few pollutants, and run on nonpetroleum fuels. Because of these characteristics, the large-scale deployment of FCV's has the potential to lessen U.S. dependence on foreign oil and improve air quality. This study characterizes the benefits of large-scale FCV deployment in the light duty vehicle market. Specifically, the study assesses the potential fuel savings and emissions reductions resulting from large-scale use of these FCV's and identifies the key parameters that affect the scope of the benefits from FCV use. The analysis scenario assumes that FCV's will compete with gasoline-powered light trucks and cars in the new vehicle market for replacement of retired vehicles and will compete for growth in the total market. Analysts concluded that the potential benefits from FCV's, measured in terms of consumer outlays for motor fuel and the value of reduced air emissions, are substantial.

Efficacy of the SU(3) scheme for ab initio large-scale calculations beyond the lightest nuclei

DOE PAGES

Dytrych, T.; Maris, P.; Launey, K. D.; ...

2016-06-22

We report on the computational characteristics of ab initio nuclear structure calculations in a symmetry-adapted no-core shell model (SA-NCSM) framework. We examine the computational complexity of the current implementation of the SA-NCSM approach, dubbed LSU3shell, by analyzing ab initio results for 6Li and 12C in large harmonic oscillator model spaces and SU3-selected subspaces. We demonstrate LSU3shell’s strong-scaling properties achieved with highly-parallel methods for computing the many-body matrix elements. Results compare favorably with complete model space calculations and significant memory savings are achieved in physically important applications. In particular, a well-chosen symmetry-adapted basis affords memory savings in calculations of states withmore » a fixed total angular momentum in large model spaces while exactly preserving translational invariance.« less

Efficacy of the SU(3) scheme for ab initio large-scale calculations beyond the lightest nuclei

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dytrych, T.; Maris, Pieter; Launey, K. D.

2016-06-09

We report on the computational characteristics of ab initio nuclear structure calculations in a symmetry-adapted no-core shell model (SA-NCSM) framework. We examine the computational complexity of the current implementation of the SA-NCSM approach, dubbed LSU3shell, by analyzing ab initio results for 6Li and 12C in large harmonic oscillator model spaces and SU(3)-selected subspaces. We demonstrate LSU3shell's strong-scaling properties achieved with highly-parallel methods for computing the many-body matrix elements. Results compare favorably with complete model space calculations and signi cant memory savings are achieved in physically important applications. In particular, a well-chosen symmetry-adapted basis a ords memory savings in calculations ofmore » states with a fixed total angular momentum in large model spaces while exactly preserving translational invariance.« less

Ice ages and the thermal equilibrium of the earth, II

USGS Publications Warehouse

Adam, D.P.

1975-01-01

The energy required to sustain midlatitude continental glaciations comes from solar radiation absorbed by the oceans. It is made available through changes in relative amounts of energy lost from the sea surface as net outgoing infrared radiation, sensible heat loss, and latent heat loss. Ice sheets form in response to the initial occurrence of a large perennial snowfield in the subarctic. When such a snowfield forms, it undergoes a drastic reduction in absorbed solar energy because of its high albedo. When the absorbed solar energy cannot supply local infrared radiation losses, the snowfield cools, thus increasing the energy gradient between itself and external, warmer areas that can act as energy sources. Cooling of the snowfield progresses until the energy gradients between the snowfield and external heat sources are sufficient to bring in enough (latent plus sensible) energy to balance the energy budget over the snowfield. Much of the energy is imported as latent heat. The snow that falls and nourishes the ice sheet is a by-product of the process used to satisfy the energy balance requirements of the snowfield. The oceans are the primary energy source for the ice sheet because only the ocean can supply large amounts of latent heat. At first, some of the energy extracted by the ice sheet from the ocean is stored heat, so the ocean cools. As it cools, less energy is lost as net outgoing infrared radiation, and the energy thus saved is then available to augment evaporation. The ratio between sensible and latent heat lost by the ocean is the Bowen ratio; it depends in part on the sea surface temperature. As the sea surface temperature falls during a glaciation, the Bowen ratio increases, until most of the available energy leaves the oceans as sensible, rather than latent heat. The ice sheet starves, and an interglacial period begins. The oscillations between stadial and interstadial intervals within a glaciation are caused by the effects of varying amounts of glacial meltwater entering the oceans as a surface layer that acts to reduce the amount of energy available for glacial nourishment. This causes the ice sheet to melt back, which continues the supply of meltwater until the ice sheet diminishes to a size consistent with the reduced rate of nourishment. The meltwater supply then decreases, the rate of nourishment increases, and a new stadial begins. ?? 1975.

Determinants of success in Shared Savings Programs: An analysis of ACO and market characteristics.

PubMed

Ouayogodé, Mariétou H; Colla, Carrie H; Lewis, Valerie A

2017-03-01

Medicare's Accountable Care Organization (ACO) programs introduced shared savings to traditional Medicare, which allow providers who reduce health care costs for their patients to retain a percentage of the savings they generate. To examine ACO and market factors associated with superior financial performance in Medicare ACO programs. We obtained financial performance data from the Centers for Medicare and Medicaid Services (CMS); we derived market-level characteristics from Medicare claims; and we collected ACO characteristics from the National Survey of ACOs for 215 ACOs. We examined the association between ACO financial performance and ACO provider composition, leadership structure, beneficiary characteristics, risk bearing experience, quality and process improvement capabilities, physician performance management, market competition, CMS-assigned financial benchmark, and ACO contract start date. We examined two outcomes from Medicare ACOs' first performance year: savings per Medicare beneficiary and earning shared savings payments (a dichotomous variable). When modeling the ACO ability to save and earn shared savings payments, we estimated positive regression coefficients for a greater proportion of primary care providers in the ACO, more practicing physicians on the governing board, physician leadership, active engagement in reducing hospital re-admissions, a greater proportion of disabled Medicare beneficiaries assigned to the ACO, financial incentives offered to physicians, a larger financial benchmark, and greater ACO market penetration. No characteristic of organizational structure was significantly associated with both outcomes of savings per beneficiary and likelihood of achieving shared savings. ACO prior experience with risk-bearing contracts was positively correlated with savings and significantly increased the likelihood of receiving shared savings payments. In the first year, performance is quite heterogeneous, yet organizational structure does not consistently predict performance. Organizations with large financial benchmarks at baseline have greater opportunities to achieve savings. Findings on prior risk bearing suggest that ACOs learn over time under risk-bearing contracts. Given the lack of predictive power for organizational characteristics, CMS should continue to encourage diversity in organizational structures for ACO participants, and provide alternative funding and risk bearing mechanisms to continue to allow a diverse group of organizations to participate. III. Copyright © 2016 Elsevier Inc. All rights reserved.

Determinants of Success in Shared Savings Programs: An Analysis of ACO and Market Characteristics

PubMed Central

Colla, Carrie H.; Lewis, Valerie A.

2016-01-01

Background Medicare’s Accountable Care Organization (ACO) programs introduced shared savings to traditional Medicare, which allow providers who reduce health care costs for their patients to retain a percentage of the savings they generate. Objective To examine ACO and market factors associated with superior financial performance in Medicare ACO programs. Methods We obtained financial performance data from the Centers for Medicare and Medicaid Services (CMS); we derived market-level characteristics from Medicare claims; and we collected ACO characteristics from the National Survey of ACOs for 215 ACOs. We examined the association between ACO financial performance and ACO provider composition, leadership structure, beneficiary characteristics, risk bearing experience, quality and process improvement capabilities, physician performance management, market competition, CMS-assigned financial benchmark, and ACO contract start date. We examined two outcomes from Medicare ACOs’ first performance year: savings per Medicare beneficiary and earning shared savings payments (a dichotomous variable). Results When modeling the ACO ability to save and earn shared savings payments, we estimated positive regression coefficients for a greater proportion of primary care providers in the ACO, more practicing physicians on the governing board, physician leadership, active engagement in reducing hospital re-admissions, a greater proportion of disabled Medicare beneficiaries assigned to the ACO, financial incentives offered to physicians, a larger financial benchmark, and greater ACO market penetration. No characteristic of organizational structure was significantly associated with both outcomes of savings per beneficiary and likelihood of achieving shared savings. ACO prior experience with risk-bearing contracts was positively correlated with savings and significantly increased the likelihood of receiving shared savings payments. Conclusions In the first year performance is quite heterogeneous, yet organizational structure does not consistently predict performance. Organizations with large financial benchmarks at baseline have greater opportunities to achieve savings. Findings on prior risk bearing suggest that ACOs learn over time under risk-bearing contracts. Implications Given the lack of predictive power for organizational characteristics, CMS should continue to encourage diversity in organizational structures for ACO participants, and provide alternative funding and risk bearing mechanisms to continue to allow a diverse group of organizations to participate. Level of evidence III PMID:27687917

Choosing the right amount of healthcare information technologies investments.

PubMed

Meyer, Rodolphe; Degoulet, Patrice

2010-04-01

Choosing and justifying the right amount of investment in healthcare information technologies (HITECH or HIT) in hospitals is an ever increasing challenge. Our objectives are to assess the financial impact of HIT on hospital outcome, and propose decision-helping tools that could be used to rationalize the distribution of hospital finances. We used a production function and microeconomic tools on data of 21 Paris university hospitals recorded from 1998 to 2006 to compute the elasticity coefficients of HIT versus non-HIT capital and labor as regards to hospital financial outcome and optimize the distribution of investments according to the productivity associated with each input. HIT inputs and non-HIT inputs both have a positive and significant impact on hospital production (elasticity coefficients respectively of 0.106 and 0.893; R(2) of 0.92). We forecast 2006 results from the 1998 to 2005 dataset with an accuracy of +0.61%. With the model used, the best proportion of HIT investments was estimated to be 10.6% of total input and this was predicted to lead to a total saving of 388 million Euros for the 2006 dataset. Considering HIT investment from the point of view of a global portfolio and applying econometric and microeconomic tools allow the required confidence level to be attained for choosing the right amount of HIT investments. It could also allow hospitals using these tools to make substantial savings, and help them forecast their choices for the following year for better HITECH governance in the current stimulation context. (c) 2010 Elsevier Ireland Ltd. All rights reserved.

Increasing Resiliency Through Renewable Energy Microgrids

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, Katherine H; DiOrio, Nicholas A; Cutler, Dylan S

This paper describes a methodology to quantify the economic and resiliency benefit provided by renewable energy (RE) in a hybrid RE-storage-diesel microgrid. We present a case study to show how this methodology is applied to a multi-use/ multi-function telecommunications facility in southern California. In the case study, we first identify photovoltaic (PV) and battery energy storage system (BESS) technologies that minimize the lifecycle cost of energy at the site under normal, grid-connected operation. We then evaluate how those technologies could be incorporated alongside existing diesel generators in a microgrid to increase resiliency at the site, where resiliency is quantified inmore » terms of the amount of time that the microgrid can sustain the critical load during a grid outage. We find that adding PV and BESS to the existing backup diesel generators with a fixed fuel supply extends the amount of time the site could survive an outage by 1.8 days, from 1.7 days for the existing diesel-only backup system to 3.5 days for the PV/diesel/BESS hybrid system. Furthermore, even after diesel fuel supplies are exhausted, the site can continue to operate critical loads during daytime hours using just the PV/BESS when there is sufficient solar resource. We find that the site can save approximately $100,000 in energy costs over the 25-year lifecycle while doubling the amount of time they can survive an outage. The methodology presented here provides a template for increasing resiliency at telecomm sites by implementing renewable energy solutions, which provide additional benefits of carbon emission reduction and energy cost savings.« less

Rebound Effects in the Context of Developing Country Efficiency

DOE Office of Scientific and Technical Information (OSTI.GOV)

de la Rue du Can, Stephane; McNeil, Michael A.; Leventis, Greg

Energy efficiency-related “rebound effects” usually refer to the tendency of most consumers to increase their use of energy services in response to efficiency measures that have reduced their energy costs. This phenomenon is one reason why energy efficiency policies often result in lower energy savings than engineering-based estimates predict. Rebound effects have been the subject of intense debate in the field of energy efficiency policy for many years.1 In the past, the focus of this debate has been on the perceived loss of the expected energy savings and related benefits resulting from the rebound effects. However, more recently, there hasmore » been a growing recognition that policymakers need to consider the health, economic and other non-energy benefits that often result from the increase in energy services represented by user “rebound effects”. This is especially true in developing countries where basic energy service demands—such as lighting, heating, cooling, and refrigeration of food—are often not being met. As economic conditions improve and household incomes increase, demand for increased energy services (such as space conditioning and appliances) tends to rise rapidly. Improving energy efficiency reduces the amount of energy needed to produce one unit of energy service output (for example an hour of cooling at 21°C delivered for X vs Y kWh). Greater efficiency therefore often enables more rapid increased in energy services (and sometimes access), expanding the amount of services that can be provided by a fixed amount (or cost) of energy.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilson, Eric J

The ResStock analysis tool is helping states, municipalities, utilities, and manufacturers identify which home upgrades save the most energy and money. Across the country there's a vast diversity in the age, size, construction practices, installed equipment, appliances, and resident behavior of the housing stock, not to mention the range of climates. These variations have hindered the accuracy of predicting savings for existing homes. Researchers at the National Renewable Energy Laboratory (NREL) developed ResStock. It's a versatile tool that takes a new approach to large-scale residential energy analysis by combining: large public and private data sources, statistical sampling, detailed subhourly buildingmore » simulations, high-performance computing. This combination achieves unprecedented granularity and most importantly - accuracy - in modeling the diversity of the single-family housing stock.« less

Hydraulic hoisting and backfilling

NASA Astrophysics Data System (ADS)

Sauermann, H. B.

In a country such as South Africa, with its large deep level mining industry, improvements in mining and hoisting techniques could result in substantial savings. Hoisting techniques, for example, may be improved by the introduction of hydraulic hoisting. The following are some of the advantages of hydraulic hoisting as against conventional skip hoisting: (1) smaller shafts are required because the pipes to hoist the same quantity of ore hydraulically require less space in the shaft than does skip hoisting equipment; (2) the hoisting capacity of a mine can easily be increased without the necessity of sinking new shafts. Large savings in capital costs can thus be made; (3) fully automatic control is possible with hydraulic hoisting and therefore less manpower is required; and (4) health and safety conditions will be improved.

Estimating the Energy, Demand and Cost Savings from a Geothermal Heat Pump ESPC Project at Fort Polk, LA Through Utility Bill Analysis.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shonder, John A; Hughes, Patrick

2006-01-01

Energy savings performance contracts (ESPCs) are a method of financing energy conservation projects using the energy cost savings generated by the conservation measures themselves. Ideally, reduced energy costs are visible as reduced utility bills, but in fact this is not always the case. On large military bases, for example, a single electric meter typically covers hundreds of individual buildings. Savings from an ESPC involving only a small number of these buildings will have little effect on the overall utility bill. In fact, changes in mission, occupancy, and energy prices could cause substantial increases in utility bills. For this reason, other,more » more practical, methods have been developed to measure and verify savings in ESPC projects. Nevertheless, increasing utility bills--when ESPCs are expected to be reducing them--are problematic and can lead some observers to question whether savings are actually being achieved. In this paper, the authors use utility bill analysis to determine energy, demand, and cost savings from an ESPC project that installed geothermal heat pumps in the family housing areas of the military base at Fort Polk, Louisiana. The savings estimates for the first year after the retrofits were found to be in substantial agreement with previous estimates that were based on submetered data. However, the utility bills also show that electrical use tended to increase as time went on. Since other data show that the energy use in family housing has remained about the same over the period, the authors conclude that the savings from the ESPC have persisted, and increases in electrical use must be due to loads unassociated with family housing. This shows that under certain circumstances, and with the proper analysis, utility bills can be used to estimate savings from ESPC projects. However, these circumstances are rare and over time the comparison may be invalidated by increases in energy use in areas unaffected by the ESPC.« less

Use of a grid simulation model for longer-term analysis of wind energy integration

NASA Astrophysics Data System (ADS)

Bossanyi, E.

A simulation model of an electricity generating system is used to study the integration of wind energy onto the system. Most of the system cost savings achieved are due to the savings of fossil fuels, but in the long term additional savings result from re-optimization of the plant mix. Break-even costs are calculated for wind turbines to become economically viable as fossil fuel savers. This allows the optimum economic penetration level for wind turbines of any given cost to be derived. Break-even costs up to reasonably large penetrations appear to be within reach with modern technology. Results are also given with scenarios of increasing fossil fuel prices and increased nuclear capacity.

A theoretical framework to guide a study of patients' bowel symptoms and self-care strategies following sphincter-saving surgery for rectal cancer.

PubMed

Landers, Margaret; McCarthy, Geraldine; Savage, Eileen

2013-08-01

A paucity of research is available on patients' bowel symptom experiences and self-care strategies following sphincter-saving surgery for rectal cancer. Most research undertaken to date on patients' bowel symptoms following surgery for rectal cancer has been largely atheoretical. The purpose of this paper is to describe the process of choosing a theoretical framework to guide a study of patients' bowel symptoms and self-care strategies following sphincter-saving surgery for rectal cancer. As a result of a thorough literature review, we determined that the Symptom Management Theory provided the most comprehensive framework to guide our research. Copyright © 2013 Elsevier Inc. All rights reserved.

The House that NASA Built

NASA Technical Reports Server (NTRS)

1977-01-01

Tech House, located at NASA's Langley Research Center, Hampton, Virginia, is a demonstration project in which aerospace and commercial building technology are combined to produce an energy-efficient home. Advanced technology offers savings to the family in utility costs and energy conservation. Solar panels on the roof of tech house provide the principal energy saving. They capture the sun's rays to heat water in pipes that run through the solar collectors. The heated water is then stored in a large, well insulated underground tank. A heat exchanger extracts beat from the water and blows it through ducts to warm the house. Tech House is well insulated for energy savings. The principal insulation is fireproof Tripolymer foam which is sprayed onto walls and ceilings in thicknesses up to six inches.

Evaluation of Potential Energy Loss Reduction and Savings for U. S. Army Electrical Distribution Systems

DTIC Science & Technology

1993-09-01

Different Size Transformers (Per Transformer ) 41 15 Additional Energy Losses for Mis-Sized Transformers (Per Transformer ) 42 16 Power System ...directly affects the amount of neutral line power loss in the system . Since most Army three-phase loads are distribution transformers spread out over a...61 Balancing Three-Phase Loads Balancing Feeder Circuit Loads Power Factor Correction Optimal Transformer Sizing Conductor Sizing Combined

The importance of cavity roosting and hypothermia to the energy balance of the winter acclimatized Carolina chickadee

NASA Astrophysics Data System (ADS)

Mayer, L.; Lustick, S.; Battersby, B.

1982-09-01

Noctural hypothermia and cavity roosting account for a significant reduction in energy expenditure in winter acclimatized Carolina chickadees. As much as 10‡C hypothermia amounted to a 33.0% reduction in metabolic requirements. Noctural hypothermia combined with a reduction in radiative and convective heat loss due to cavity roosting accounted for as much as a 50% savings in energy expenditure.

A Feasibility Study to Determine the Possibility of Teaching Freshman Composition and Rhetoric with a Programmed Text. Final Report.

ERIC Educational Resources Information Center

Lutz, William D.

The question of whether a significant amount of time could be saved if freshman composition were taught with a programed text was studied. Two sections of English I were randomly selected from the regular class schedule. Class A was taught using the usual syllabus and texts. Class B was taught using the same syllabus and texts with one exception.…

Opportunities to Reduce Potential Duplication in Government Programs, Save Tax Dollars, and Enhance Revenue

DTIC Science & Technology

2011-03-03

inflation, and round appropriately, the fixed- dollar amounts of the civil penalties to account for the decrease in real value over time and so that...policy, and funding decisions. GAO’s commitment to good government is reflected in its core values of accountability , integrity, and reliability. The...United States Government Accountability Office GAO Testimony Before the House Committee on Oversight and Government Reform

26 CFR 1.593-8 - Allocation of pre-1952 surplus to opening balance of reserve for losses on qualifying real...

Code of Federal Regulations, 2011 CFR

2011-04-01

... 26 Internal Revenue 7 2011-04-01 2009-04-01 true Allocation of pre-1952 surplus to opening balance... (CONTINUED) Mutual Savings Banks, Etc. § 1.593-8 Allocation of pre-1952 surplus to opening balance of reserve... the opening balance of the reserve for losses on qualifying real property loans is less than an amount...

26 CFR 1.593-8 - Allocation of pre-1952 surplus to opening balance of reserve for losses on qualifying real...

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 7 2010-04-01 2010-04-01 true Allocation of pre-1952 surplus to opening balance... (CONTINUED) Mutual Savings Banks, Etc. § 1.593-8 Allocation of pre-1952 surplus to opening balance of reserve... the opening balance of the reserve for losses on qualifying real property loans is less than an amount...

Federal Debt and Interests Costs

DTIC Science & Technology

1993-05-01

relatively small amount of bond to Argentina as part of a comprehensive debt issued directly to foreign governments in debt reduction agreement with commercial...their investments because of an economic crisis needs of the private sector, propped up interest or as part of a coordinated political action. U.S...Zero-Coupon Bonds. Similar to savings and loan crisis . Because REFCORP is the foreign zero-coupon bonds described above technically private, the money

Disposable laparoscopic surgical instruments and the economic effects of repackaging.

PubMed

Takeuchi, Hiroyuki; Kikuchi, Iwaho; Kitade, Mari; Kumakiri, Jun; Kinoshita, Katsuyuki; Takehiro, Yuka; Tanimura, Emiko

2005-04-01

The purpose of this study was to evaluate the economic effects of repackaging disposable laparoscopic surgical instruments. We repacked a total of 28 disposable instruments for gynecologic laparoscopic surgery into one package. The time of preparation of surgical instruments, the amount of medical waste, and other economic effects were compared before and after the repackaging of disposable instruments. The time required for the preparation of surgical instruments was shortened by 22 minutes per operation, and medical waste decreased by 400 g, by repackaging the instruments, resulting in an estimated direct economic saving of $10,000 per year. Indirect economic effects might include savings due to a reduced inventory of surgical instruments and simplified cost-accounting for each operation. It is likely that preparation for surgery can be significantly improved and the cost reduced by repackaging the laparoscopic surgical instruments.

Analyzing the Efficiency of Introduction of the Intermittent Heating Mode

NASA Astrophysics Data System (ADS)

Anisimova, E.; Shcherbak, A.

2017-11-01

The efficiency of introduction of an optimal intermittent heating mode for a service center building in Chelyabinsk is estimated. The optimal intermittent heating mode ensures heat energy saving while maintaining the required microclimate parameters. The graphical dependencies of the amount of heat energy saving on the heat retention of the building and the outdoor air temperature are shown. The fundamental formulas which were the basis for calculating the periods of cooling, warming and expenditures of heat energy for the two heating modes are given. The literature on the issue is reviewed, the main points, advantages and disadvantages in the works of both Russian and foreign authors are revealed. The calculation was carried out in compliance with the modern state standards and regulatory documents. The capital costs of a system construction with an intermittent heating mode are determined.

What are the potential benefits of including latent storage in common wallboard?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stovall, T.K.; Tomlinson, J.J.

1995-11-01

Previous work has shown that wallboard can be successfully manufactured to contain up to 30% phase-change material (PCM), or wax, thus enabling this common building material to serve as a thermal energy storage device. The PCM wallboard was analyzed for passive solar applications and found to save energy with a reasonable payback time period of five years. Further evaluations of the wallboard are reported in this paper. This analysis looks at potential applications of PCM wallboard as a load management device and as a comfort enhancer. Results show that the wallboard is ineffective in modifying the comfort level but canmore » provide significant load management relief. In some applications the load management strategy also serves to save a small amount of energy, in others there is a small energy penalty.« less

Cost implications for changing candidacy or access to service within a publicly funded healthcare system?

PubMed

O'Neill, Ciaran; Lamb, Brian; Archbold, Sue

2016-04-01

Undue attention in the allocation of healthcare resources can be given to expenditures as opposed to expenditures avoided. This can be particularly apparent when expenditures avoided fall across different budget holders and budgetary pressures are strained. The paper presents estimates of the potential savings attributable to the adoption of new hearing assistive technologies in Britain between 1992 and 2014 based on multivariate analyses of survey data. The reduction in service use among the hearing impaired between 1992 and 2014 is estimated to amount to between £53 and £92 million per annum. Issues in estimating the impact of widening candidature for cochlear implants on costs exist related to potential savings. This research begins to lay a firmer evidence base for such work as well as identifying some of the challenges.

Variation of magnetic properties with mischmetal content in the resource saving magnets of MM-Fe-B ribbons

NASA Astrophysics Data System (ADS)

Li, Zhu-bai; Wang, Li-chen; Geng, Xiao-peng; Hu, Feng-xia; Sun, Ji-rong; Shen, Bao-gen

2017-03-01

Magnetic materials of MM-Fe-B (MM=mischmetal) ribbons were prepared using melt spinning method by varying the content of MM. The ribbons contain minor phases besides the main phase of Re2Fe14B. X-ray techniques show that the diffraction peak intensities of the minor phase Fe3B vary with the content of constituent elements, indicating that the amount of minor phase could be tunable. The squareness of hysteresis loop is the best in MM13Fe80.5B6.5 ribbons, which should mainly ascribe to the less amount of minor phase. Henkel plots verify the more uniform magnetization reversals in MM13Fe80.5B6.5 ribbons, and the energy product achieves to the maximum of 12.74 MGOe with the coercivity of 6.50 kOe. With the increase of MM content the coercivity increases monotonically, and reaches to 9.13 kOe in MM15Fe77.5B7.5 ribbons, which should be related with the nature of the defects in the main phase. These investigations show that optimizing the content of constituent elements and phase constitution could improve magnetic properties in the resource-saving magnets of MM-Fe-B ribbons.

Starting Up a Company in a Mature Market: Wise or Foolish ?

NASA Astrophysics Data System (ADS)

Biberger, Maximilian

SDCmaterials, Inc. (SDC) is a venture backed, mature start up in the automotive sector. Moreover: Catalytic Converters for vehicles and stationary applications. The company has invented and developed environmentally friendly, novel materials as well as material integration techniques for catalytic converters based on a proprietary and patented nanotechnology. Traditionally catalysts require large amounts of PGMs (Platinum Group Metals), more than USD 10B per year, in order to treat vehicle emissions. Due to that, the catalytic converter is the single most expensive piece part in a vehicle. The currently used technologies have served the industry well. However, as emission standards dramatically tighten, particularly in China, the demand for more fuel efficient and Hybrid vehicles increases, this technology begins to start showing limitations as it can meet the aforementioned demands only by increasing the PGM amount per vehicle. This in turn will increase the cost per vehicle and / or reduce margins for the automotive industry, and in addition to that impact the environment negatively. In contrast to existing technologies, the SDC based technology can meet future emission goals by maintaining, or even reducing, the PGM amount required to treat exhaust emissions. This results in tremendous savings for the consumer and the automotive industry, as well as a significantly better stewardship of natural resources and clean manufacturing. In the present paper the pros and cons of starting a nanotechnology company in a mature market are presented. Both from a business & economics, as well as from a technology point of view. The case is made that it is possible to start a company in a mature market and that novel technologies can compete economically with 40+ old year technologies.

Water-saving interventions assessment framework: an application for the Urmia Lake Restoration Program

NASA Astrophysics Data System (ADS)

Shadkam, Somayeh; Oel, Pieter; Kabat, Pavel; Ludwig, Fulco

2017-04-01

Increasing water demand often results in unsustainable water use leaving insufficient amounts of water for sustaining natural environments. Therefore, to save natural resources water-saving interventions have been introduced to the environmental policy agenda in many (semi)-arid regions. Many policies, however, have failed reaching their objectives to increase water availability for the environment. This calls for a comprehensive tool to assess water-saving policies. Therefore, this study introduces a constructive framework to assess the policies by estimating five components: 1) Total water demand under socio-economic scenarios, 2) Water supply under climate change scenarios, 3) Water withdrawal for different sectors, 4) Water depletion and 5) Environmental flow. The framework, was applied to assess Urmia Lake Restoration Program (ULRP), which aims to restore the drying Urmia Lake in north-western Iran by increasing the lake inflow by 3.1×106m3yr-1. Results suggest that although the ULRP helps to increase inflow by up to 57% it is unlikely to fully reach its target. The analysis shows that there are three main reasons for the potential poor performance. The first reason is decreasing return flows due to increasing irrigation efficiency. This means that the expected increase in lake inflow volume is smaller than the volume saved by increasing irrigation efficiency. The second reason is increased depletion which is due to neglecting the fact that agricultural water demand is currently higher than available water for agriculture. As a result, increasing water use efficiency may result in increased water depletion. The third reason is ignoring the potential impact of climate change, which might decrease future water availability by 3% to 15%. Our analysis suggests that to reach the intervention target, measures need to focus on reducing Water demand and Water depletion rather than on reducing Water withdrawals. The assessment framework can be used to comprehensively assess water-saving intervention plans, particularly in water-stressed basins.

Titanium fasteners. [for aircraft industry

NASA Technical Reports Server (NTRS)

Phillips, J. L.

1972-01-01

Titanium fasteners are used in large quantities throughout the aircraft industry. Most of this usage is in aluminum structure; where titanium structure exists, titanium fasteners are logically used as well. Titanium fasteners offer potential weight savings to the designer at a cost of approximately $30 per pound of weight saved. Proper and least cost usage must take into consideration type of fastener per application, galvanic couples and installation characteristics of protective coatings, cosmetic appearance, paint adhesion, installation forces and methods available and fatigue performance required.