Small scale photo probability sampling and vegetation classification in southeast Arizona as an ecological base for resource inventory. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Johnson, J. R. (Principal Investigator)

1974-01-01

The author has identified the following significant results. The broad scale vegetation classification was developed for a 3,200 sq mile area in southeastern Arizona. The 31 vegetation types were derived from association tables which contained information taken at about 500 ground sites. The classification provided an information base that was suitable for use with small scale photography. A procedure was developed and tested for objectively comparing photo images. The procedure consisted of two parts, image groupability testing and image complexity testing. The Apollo and ERTS photos were compared for relative suitability as first stage stratification bases in two stage proportional probability sampling. High altitude photography was used in common at the second stage.

Development of a Meso-Scale SMA-Based Torsion Actuator for Image-Guided Procedures.

PubMed

Sheng, Jun; Gandhi, Dheeraj; Gullapalli, Rao; Simard, J Marc; Desai, Jaydev P

2017-02-01

This paper presents the design, modeling, and control of a meso-scale torsion actuator based on shape memory alloy (SMA) for image-guided surgical procedures. Developing a miniature torsion actuator is challenging, but it opens the possibility of significantly enhancing the robot agility and maneuverability. The proposed torsion actuator is bi-directionally actuated by a pair of antagonistic SMA torsion springs through alternate Joule heating and natural cooling. The torsion actuator is integrated into a surgical robot prototype to demonstrate its working performance in the humid environment under C-Arm CT image guidance.

Development of a Meso-Scale SMA-Based Torsion Actuator for Image-Guided Procedures

PubMed Central

Sheng, Jun; Gandhi, Dheeraj; Gullapalli, Rao; Simard, J. Marc; Desai, Jaydev P.

2016-01-01

This paper presents the design, modeling, and control of a meso-scale torsion actuator based on shape memory alloy (SMA) for image-guided surgical procedures. Developing a miniature torsion actuator is challenging, but it opens the possibility of significantly enhancing the robot agility and maneuverability. The proposed torsion actuator is bi-directionally actuated by a pair of antagonistic SMA torsion springs through alternate Joule heating and natural cooling. The torsion actuator is integrated into a surgical robot prototype to demonstrate its working performance in the humid environment under C-Arm CT image guidance. PMID:28210189

Predicting Wanton Assault in a General Youth Sample via the HEW Youth Development Model's Community Program Impact Scales, Age and Sex.

ERIC Educational Resources Information Center

Truckenmiller, James L.

The former HEW National Strategy for Youth Development Model was a community-based planning and procedural tool designed to enhance positive youth development and prevent delinquency through a process of youth needs assessment, development of targeted programs, and program impact evaluation. A series of 12 Impact Scales most directly reflect the…

Scaling earthquake ground motions for performance-based assessment of buildings

USGS Publications Warehouse

Huang, Y.-N.; Whittaker, A.S.; Luco, N.; Hamburger, R.O.

2011-01-01

The impact of alternate ground-motion scaling procedures on the distribution of displacement responses in simplified structural systems is investigated. Recommendations are provided for selecting and scaling ground motions for performance-based assessment of buildings. Four scaling methods are studied, namely, (1)geometric-mean scaling of pairs of ground motions, (2)spectrum matching of ground motions, (3)first-mode-period scaling to a target spectral acceleration, and (4)scaling of ground motions per the distribution of spectral demands. Data were developed by nonlinear response-history analysis of a large family of nonlinear single degree-of-freedom (SDOF) oscillators that could represent fixed-base and base-isolated structures. The advantages and disadvantages of each scaling method are discussed. The relationship between spectral shape and a ground-motion randomness parameter, is presented. A scaling procedure that explicitly considers spectral shape is proposed. ?? 2011 American Society of Civil Engineers.

EXAMINING THE DIMENSIONALITY OF COLQUITT'S ORGANIZATIONAL JUSTICE SCALE IN A PUBLIC HEALTH SECTOR CONTEXT.

PubMed

Enoksen, Elisabeth

2015-06-01

In 2001, Colquitt developed an Organizational Justice Scale that intended to measure procedural, distributive, interpersonal, and informational justice. The dimensionality of the scale has been tested in subsequent studies with diverging results. Given the fact that contextual differences may account for more variation across research sites than individual differences, the deviating research findings may be due to context. This study examined the dimensionality of Colquitt's Organizational Justice Scale in a new context: the public health sector. The procedural and informational justice dimensions were highly correlated, but confirmatory factor analysis showed that a four-factor solution provided a better fit than a three-factor solution. All fit indices for the four-factor model were consistent with a good model. There was, however, evidence of a potential omitted factor, procedural-voice justice, which has also been found in a previous examination of the measure in the public sector.

Evaluation of Currently Used Dental Management Indicators and Development of New Management and Performance Indicators.

DTIC Science & Technology

1981-07-01

for selected procedures g. Pericdontal Procedures Per Dentist Formula: Number of Perio Procedures Comr’.neted* Nunber of Dentists Assigned *See appendi...02336 - Resin, Complex A-2 Selected Endodontic Procedures for Endo teeth per assigned DDS ratio: 03311 - Anterior, 1 Canal Filled 03312 - Anterior, 2 or...04271 - Free Soft Tissue Graft 04272 - Vestibulo.-lasty 04340 - Perio Scale and Root Planning *Some or these procedures are not end-item entities as are

US National Large-scale City Orthoimage Standard Initiative

USGS Publications Warehouse

Zhou, G.; Song, C.; Benjamin, S.; Schickler, W.

2003-01-01

The early procedures and algorithms for National digital orthophoto generation in National Digital Orthophoto Program (NDOP) were based on earlier USGS mapping operations, such as field control, aerotriangulation (derived in the early 1920's), the quarter-quadrangle-centered (3.75 minutes of longitude and latitude in geographic extent), 1:40,000 aerial photographs, and 2.5 D digital elevation models. However, large-scale city orthophotos using early procedures have disclosed many shortcomings, e.g., ghost image, occlusion, shadow. Thus, to provide the technical base (algorithms, procedure) and experience needed for city large-scale digital orthophoto creation is essential for the near future national large-scale digital orthophoto deployment and the revision of the Standards for National Large-scale City Digital Orthophoto in National Digital Orthophoto Program (NDOP). This paper will report our initial research results as follows: (1) High-precision 3D city DSM generation through LIDAR data processing, (2) Spatial objects/features extraction through surface material information and high-accuracy 3D DSM data, (3) 3D city model development, (4) Algorithm development for generation of DTM-based orthophoto, and DBM-based orthophoto, (5) True orthophoto generation by merging DBM-based orthophoto and DTM-based orthophoto, and (6) Automatic mosaic by optimizing and combining imagery from many perspectives.

Spectral Upscaling for Graph Laplacian Problems with Application to Reservoir Simulation

DOE PAGES

Barker, Andrew T.; Lee, Chak S.; Vassilevski, Panayot S.

2017-10-26

Here, we consider coarsening procedures for graph Laplacian problems written in a mixed saddle-point form. In that form, in addition to the original (vertex) degrees of freedom (dofs), we also have edge degrees of freedom. We extend previously developed aggregation-based coarsening procedures applied to both sets of dofs to now allow more than one coarse vertex dof per aggregate. Those dofs are selected as certain eigenvectors of local graph Laplacians associated with each aggregate. Additionally, we coarsen the edge dofs by using traces of the discrete gradients of the already constructed coarse vertex dofs. These traces are defined on themore » interface edges that connect any two adjacent aggregates. The overall procedure is a modification of the spectral upscaling procedure developed in for the mixed finite element discretization of diffusion type PDEs which has the important property of maintaining inf-sup stability on coarse levels and having provable approximation properties. We consider applications to partitioning a general graph and to a finite volume discretization interpreted as a graph Laplacian, developing consistent and accurate coarse-scale models of a fine-scale problem.« less

Contemporary Militant Extremism: A Linguistic Approach to Scale Development

ERIC Educational Resources Information Center

Stankov, Lazar; Higgins, Derrick; Saucier, Gerard; Knezevic, Goran

2010-01-01

In this article, the authors describe procedures used in the development of a new scale of militant extremist mindset. A 2-step approach consisted of (a) linguistic analysis of the texts produced by known terrorist organizations and selection of statements from these texts that reflect the mindset of those belonging to these organizations and (b)…

Developing survey grids to substantiate freedom from exotic pests

Treesearch

John W. Coulston; Frank H. Koch; William D. Smith

2009-01-01

Systematic, hierarchical intensification of the Environmental Monitoring and Assessment Program hexagon for North America yields a simple procedure for developing national-scale survey grids. In this article, we describe the steps to create a national-scale survey grid using a risk map as the starting point. We illustrate the steps using an exotic pest example in which...

Delinquency Level Classification Via the HEW Community Program Youth Impact Scales.

ERIC Educational Resources Information Center

Truckenmiller, James L.

The former HEW National Strategy for Youth Development (NSYD) model was created as a community-based planning and procedural tool to promote youth development and prevent delinquency. To assess the predictive power of NSYD Impact Scales in classifying youths into low, medium, and high delinquency levels, male and female students aged 10-19 years…

Development of the Horse Grimace Scale (HGS) as a Pain Assessment Tool in Horses Undergoing Routine Castration

PubMed Central

Dalla Costa, Emanuela; Minero, Michela; Lebelt, Dirk; Stucke, Diana; Canali, Elisabetta; Leach, Matthew C.

2014-01-01

Background The assessment of pain is critical for the welfare of horses, in particular when pain is induced by common management procedures such as castration. Existing pain assessment methods have several limitations, which reduce the applicability in everyday life. Assessment of facial expression changes, as a novel means of pain scoring, may offer numerous advantages and overcome some of these limitations. The objective of this study was to develop and validate a standardised pain scale based on facial expressions in horses (Horse Grimace Scale [HGS]). Methodology/Principal Findings Forty stallions were assigned to one of two treatments and all animals underwent routine surgical castration under general anaesthesia. Group A (n = 19) received a single injection of Flunixin immediately before anaesthesia. Group B (n = 21) received Flunixin immediately before anaesthesia and then again, as an oral administration, six hours after the surgery. In addition, six horses were used as anaesthesia controls (C). These animals underwent non-invasive, indolent procedures, received the same treatment as group A, but did not undergo surgical procedures that could be accompanied with surgical pain. Changes in behaviour, composite pain scale (CPS) scores and horse grimace scale (HGS) scores were assessed before and 8-hours post-procedure. Only horses undergoing castration (Groups A and B) showed significantly greater HGS and CPS scores at 8-hours post compared to pre operatively. Further, maintenance behaviours such as explorative behaviour and alertness were also reduced. No difference was observed between the two analgesic treatment groups. Conclusions The Horse Grimace Scale potentially offers an effective and reliable method of assessing pain following routine castration in horses. However, auxiliary studies are required to evaluate different painful conditions and analgesic schedules. PMID:24647606

Evaluation of treatment related fear using a newly developed fear scale for children: "Fear assessment picture scale" and its association with physiological response.

PubMed

Tiwari, Nishidha; Tiwari, Shilpi; Thakur, Ruchi; Agrawal, Nikita; Shashikiran, N D; Singla, Shilpy

2015-01-01

Dental treatment is usually a poignant phenomenon for children. Projective scales are preferred over psychometric scales to recognize it, and to obtain the self-report from children. The aims were to evaluate treatment related fear using a newly developed fear scale for children, fear assessment picture scale (FAPS), and anxiety with colored version of modified facial affective scale (MFAS) - three faces along with physiologic responses (pulse rate and oxygen saturation) obtained by pulse oximeter before and during pulpectomy procedure. Total, 60 children of age 6-8 years who were visiting the dental hospital for the first time and needed pulpectomy treatment were selected. Children selected were of sound physical, physiological, and mental condition. Two projective scales were used; one to assess fear - FAPS and to assess anxiety - colored version of MFAS - three faces. These were co-related with the physiological responses (oxygen saturation and pulse rate) of children obtained by pulse oximeter before and during the pulpectomy procedure. Shapiro-Wilk test, McNemar's test, Wilcoxon signed ranks test, Kruskal-Wallis test, Mann-Whitney test were applied in the study. The physiological responses showed association with FAPS and MFAS though not significant. However, oxygen saturation with MFAS showed a significant change between "no anxiety" and "some anxiety" as quantified by Kruskal-Wallis test value 6.287, P = 0.043 (<0.05) before pulpectomy procedure. The FAPS can prove to be a pragmatic tool in spotting the fear among young children. This test is easy and fast to apply on children and reduces the chair-side time.

Documentation for assessment of modal pushover-based scaling procedure for nonlinear response history analysis of "ordinary standard" bridges

USGS Publications Warehouse

Kalkan, Erol; Kwong, Neal S.

2010-01-01

The earthquake engineering profession is increasingly utilizing nonlinear response history analyses (RHA) to evaluate seismic performance of existing structures and proposed designs of new structures. One of the main ingredients of nonlinear RHA is a set of ground-motion records representing the expected hazard environment for the structure. When recorded motions do not exist (as is the case for the central United States), or when high-intensity records are needed (as is the case for San Francisco and Los Angeles), ground motions from other tectonically similar regions need to be selected and scaled. The modal-pushover-based scaling (MPS) procedure recently was developed to determine scale factors for a small number of records, such that the scaled records provide accurate and efficient estimates of 'true' median structural responses. The adjective 'accurate' refers to the discrepancy between the benchmark responses and those computed from the MPS procedure. The adjective 'efficient' refers to the record-to-record variability of responses. Herein, the accuracy and efficiency of the MPS procedure are evaluated by applying it to four types of existing 'ordinary standard' bridges typical of reinforced-concrete bridge construction in California. These bridges are the single-bent overpass, multi span bridge, curved-bridge, and skew-bridge. As compared to benchmark analyses of unscaled records using a larger catalog of ground motions, it is demonstrated that the MPS procedure provided an accurate estimate of the engineering demand parameters (EDPs) accompanied by significantly reduced record-to-record variability of the responses. Thus, the MPS procedure is a useful tool for scaling ground motions as input to nonlinear RHAs of 'ordinary standard' bridges.

Review of edgematchimg procedures for digital cartographic data used in Geographic Information Systems (GIS)

USGS Publications Warehouse

Nebert, D.D.

1989-01-01

In the process of developing a continuous hydrographic data layer for water resources applications in the Pacific Northwest, map-edge discontinuities in the U.S. Geological Survey 1:100 ,000-scale digital data that required application of computer-assisted edgematching procedures were identified. The spatial data sets required by the project must have line features that match closely enough across map boundaries to ensure full line topology when adjacent files are joined by the computer. Automated edgematching techniques are evaluated as to their effects on positional accuracy. Interactive methods such as selective node-matching and on-screen editing are also reviewed. Interactive procedures complement automated methods by allowing supervision of edgematching in a cartographic and hydrologic context. Common edge conditions encountered in the preparation of the Northwest Rivers data base are described, as are recommended processing solutions. Suggested edgematching procedures for 1:100,000-scale hydrography data are included in an appendix to encourage consistent processing of this theme on a national scale. (USGS)

NASA/FAA general aviation crash dynamics program

NASA Technical Reports Server (NTRS)

Thomson, R. G.; Hayduk, R. J.; Carden, H. D.

1981-01-01

The program involves controlled full scale crash testing, nonlinear structural analyses to predict large deflection elastoplastic response, and load attenuating concepts for use in improved seat and subfloor structure. Both analytical and experimental methods are used to develop expertise in these areas. Analyses include simplified procedures for estimating energy dissipating capabilities and comprehensive computerized procedures for predicting airframe response. These analyses are developed to provide designers with methods for predicting accelerations, loads, and displacements on collapsing structure. Tests on typical full scale aircraft and on full and subscale structural components are performed to verify the analyses and to demonstrate load attenuating concepts. A special apparatus was built to test emergency locator transmitters when attached to representative aircraft structure. The apparatus is shown to provide a good simulation of the longitudinal crash pulse observed in full scale aircraft crash tests.

Category identification of changed land-use polygons in an integrated image processing/geographic information system

NASA Technical Reports Server (NTRS)

Westmoreland, Sally; Stow, Douglas A.

1992-01-01

A framework is proposed for analyzing ancillary data and developing procedures for incorporating ancillary data to aid interactive identification of land-use categories in land-use updates. The procedures were developed for use within an integrated image processsing/geographic information systems (GIS) that permits simultaneous display of digital image data with the vector land-use data to be updated. With such systems and procedures, automated techniques are integrated with visual-based manual interpretation to exploit the capabilities of both. The procedural framework developed was applied as part of a case study to update a portion of the land-use layer in a regional scale GIS. About 75 percent of the area in the study site that experienced a change in land use was correctly labeled into 19 categories using the combination of automated and visual interpretation procedures developed in the study.

Evaluation of low-cost commercial-off-the-shelf autopilot systems for SUAS operations

NASA Astrophysics Data System (ADS)

Brown, Calvin Thomas

With this increase in unmanned aircraft system (UAS) operations, there is a need for a structured process to evaluate different commercially available systems, particularly autopilots. The Remotely Operated Aircraft Management, Interpretation, and Navigation from Ground or ROAMING scale was developed to meet this need. This scale is a modification of the widely accepted Handling Qualities Rating scale developed by George Cooper and Robert Harper Jr. The Cooper-Harper scale allows pilots to rate a vehicle's performance in completing some task. Similarly, the ROAMING scale allows UAS operators to evaluate the management and observability of UAS in completing some task. The standardized evaluative process consists of cost, size, weight, and power (SWAP) analysis, ease of implementation through procedural description of setup, ROAMING scale rating, a slightly modified NASA TLX rating, and comparison of manual operation to autonomous operation of the task. This standard for evaluation of autopilots and their software will lead to better understanding of the workload placed on UAS operators and indicate where improvements to design and operational procedures can be made. An assortment of low-cost commercial-off-the-shelf (COTS) autopilots were selected for use in the development of the evaluation and results of these tests demonstrate the commonalities and differences in these systems.

Predicting Vandalism in a General Youth Sample via the HEW Youth Development Model's Community Program Impact Scales, Age, and Sex.

ERIC Educational Resources Information Center

Truckenmiller, James L.

The former HEW National Strategy for Youth Development model was a community-based planning and procedural tool to enhance and to prevent delinquency through a process of youth needs assessments, needs targeted programs, and program impact evaluation. The program's 12 Impact Scales have been found to have acceptable reliabilities, substantial…

Causal Attribution: A New Scale Developed to Minimize Existing Methodological Problems.

ERIC Educational Resources Information Center

Bull, Kay Sather; Feuquay, Jeffrey P.

In order to facilitate research on the construct of causal attribution, this paper details developmental procedures used to minimize previous deficiencies and proposes a new scale. The first version of the scale was in ipsative form and provided two basic sets of indices: (1) ability, effort, luck, and task difficulty indices in success and…

A Factor Analytic Study of a Scale Designed to Measure Death Anxiety.

ERIC Educational Resources Information Center

Thorson, James A.; Perkins, Mark

A death anxiety scale developed in 1973 by Nehrke was administered to 655 adult subjects. Their responses were differentiated according to age, sex, race, and level of education. Data were also analyzed using the varimax rotated factor matrix procedure to determine significant factors that the scale was, in fact, measuring. Loadings on four…

The SERGISAI procedure for seismic risk assessment

NASA Astrophysics Data System (ADS)

Zonno, G.; Garcia-Fernandez, M.; Jimenez, M.J.; Menoni, S.; Meroni, F.; Petrini, V.

The European project SERGISAI developed a computational tool where amethodology for seismic risk assessment at different geographical scales hasbeen implemented. Experts of various disciplines, including seismologists,engineers, planners, geologists, and computer scientists, co-operated in anactual multidisciplinary process to develop this tool. Standard proceduralcodes, Geographical Information Systems (GIS), and Artificial Intelligence(AI) techniques compose the whole system, that will enable the end userto carry out a complete seismic risk assessment at three geographical scales:regional, sub-regional and local. At present, single codes or models thathave been incorporated are not new in general, but the modularity of theprototype, based on a user-friendly front-end, offers potential users thepossibility of updating or replacing any code or model if desired. Theproposed procedure is a first attempt to integrate tools, codes and methodsfor assessing expected earthquake damage, and it was mainly designedto become a useful support for civil defence and land use planning agencies.Risk factors have been treated in the most suitable way for each one, interms of level of detail, kind of parameters and units of measure.Identifying various geographical scales is not a mere question of dimension;since entities to be studied correspond to areas defined by administrativeand geographical borders. The procedure was applied in the following areas:Toscana in Italy, for the regional scale, the Garfagnana area in Toscana, forthe sub-regional scale, and a part of Barcelona city, Spain, for the localscale.

An evaluation of methods for scaling aircraft noise perception

NASA Technical Reports Server (NTRS)

Ollerhead, J. B.

1971-01-01

One hundred and twenty recorded sounds, including jets, turboprops, piston engined aircraft and helicopters were rated by a panel of subjects in a paired comparison test. The results were analyzed to evaluate a number of noise rating procedures in terms of their ability to accurately estimate both relative and absolute perceived noise levels. It was found that the complex procedures developed by Stevens, Zwicker and Kryter are superior to other scales. The main advantage of these methods over the more convenient weighted sound pressure level scales lies in their ability to cope with signals over a wide range of bandwidth. However, Stevens' loudness level scale and the perceived noise level scale both overestimate the growth of perceived level with intensity because of an apparent deficiency in the band level summation rule. A simple correction is proposed which will enable these scales to properly account for the experimental observations.

Assessment methods for rehabilitation.

PubMed

Biefang, S; Potthoff, P

1995-09-01

Diagnostics and evaluation in medical rehabilitation should be based on methods that are as objective as possible. In this context quantitative methods are an important precondition. We conducted for the German Pensions Insurance Institutions (which are in charge of the medical and vocational rehabilitation of workers and employees) a survey on assessment methods for rehabilitation which included an evaluation of American literature, with the aim to indicate procedures that can be considered for adaptation in Germany and to define further research requirements. The survey identified: (1) standardized procedures and instrumented tests for the assessment of musculoskeletal, cardiopulmonary and neurophysiological function; (2) personality, intelligence, achievement, neuropsychological and alcoholism screening tests for the assessment of mental or cognitive function; (3) rating scales and self-administered questionnaires for the assessment of Activities of Daily Living and Instrumental Activities of Daily Living (ADL/IADL Scales); (4) generic profiles and indexes as well as disease-specific measures for the assessment of health-related quality of life and health status; and (5) rating scales for vocational assessment. German equivalents or German versions exist only for a part of the procedures identified. Translation and testing of Anglo-Saxon procedures should have priority over the development of new German methods. The following procedures will be taken into account: (a) instrumented tests for physical function, (b) IADL Scales, (c) generic indexes of health-related quality of life, (d) specific quality of life and health status measures for disorders of the circulatory system, metabolic system, digestive organs, respiratory tract and for cancer, and (e) vocational rating scales.

SS/RCS surface tension propellant acquisition/expulsion tankage technology

NASA Technical Reports Server (NTRS)

1975-01-01

The analysis, design, fabrication, and testing of a propellant tank that satisfies the requirements of the space shuttle is presented. This mission presents very stringent and sometimes conflicting requirements. A compartmented-tank device was developed and various ground and drop tower test techniques were employed to verify the design using both subscale and full-scale hardware. Performance was established with scale models and further substantiation was obtained with the full-scale tankage. Fabrication, acceptance, fill and drain, inspection, and other ground handling procedures were developed.

STREAM TEMPERATURE SIMULATION OF FORESTED RIPARIAN AREAS: I. WATERSHED-SCALE MODEL DEVELOPMENT

EPA Science Inventory

To simulate stream temperatures on a watershed scale, shading dynamics of topography and riparian vegetation must be computed for estimating the amount of solar radiation that is actually absorbed by water for each stream reach. A series of computational procedures identifying th...

Research on Mathematical Techniques in Psychology. Final Report.

ERIC Educational Resources Information Center

Gulliksen, Harold

Mathematical techniques are developed for studying psychological problems in three fields: (1) psychological scaling, (2) learning and concept formation, and (3) mental measurement. Psychological scaling procedures are demonstrated to be useful in many areas, ranging from sensory discrimination of physical stimuli, such as colors, sounds, etc.,…

The Construction and Utility of Three Indexes of Intellectual Achievement: An Intellectual-Development (ID) Index; A Socio-Intellectual-Status (SIS) Index; A Differential-Intellectual-Development (DID) Index. U.S. Children and Youths, 6-17 Years. Vital and Health Statistics. Data Evaluation and Methods Research. Series 2-Number 74.

ERIC Educational Resources Information Center

Dupuy, Harold J.; Gruvaeus, Gunnar

Although the Intellectual Development (ID) index was constructed using standard psychometric procedures, the derivation of the other two indexes, Socio Intellectual Status (SIS) and Differential Intellectual Development (DID), by criterion scaling should have applications in diverse areas of scale or index construction. The ID is basically…

NASTRAN analysis of the 1/8-scale space shuttle dynamic model

NASA Technical Reports Server (NTRS)

Bernstein, M.; Mason, P. W.; Zalesak, J.; Gregory, D. J.; Levy, A.

1973-01-01

The space shuttle configuration has more complex structural dynamic characteristics than previous launch vehicles primarily because of the high model density at low frequencies and the high degree of coupling between the lateral and longitudinal motions. An accurate analytical representation of these characteristics is a primary means for treating structural dynamics problems during the design phase of the shuttle program. The 1/8-scale model program was developed to explore the adequacy of available analytical modeling technology and to provide the means for investigating problems which are more readily treated experimentally. The basic objectives of the 1/8-scale model program are: (1) to provide early verification of analytical modeling procedures on a shuttle-like structure, (2) to demonstrate important vehicle dynamic characteristics of a typical shuttle design, (3) to disclose any previously unanticipated structural dynamic characteristics, and (4) to provide for development and demonstration of cost effective prototype testing procedures.

New Mexico Standards Based Assessment (NMSBA) Technical Report: 2006 Spring Administration

ERIC Educational Resources Information Center

Griph, Gerald W.

2006-01-01

The purpose of the NMSBA technical report is to provide users and other interested parties with a general overview of and technical characteristics of the 2006 NMSBA. The 2006 technical report contains the following information: (1) Test development; (2) Scoring procedures; (3) Calibration, scaling, and equating procedures; (4) Standard setting;…

Recent Developments in Assessment Procedures in England and Wales.

ERIC Educational Resources Information Center

Goldstein, Harvey; Nuttall, Desmond

Focusing on technical issues, this paper critiques proposed changes in assessment procedures at the further educational level (ages 16 through 18) in England and Wales. Major structural changes are taking place at this educational level, partly because of large scale youth unemployment. The two current examination systems for the final year of…

Bi-Factor MIRT Observed-Score Equating for Mixed-Format Tests

ERIC Educational Resources Information Center

Lee, Guemin; Lee, Won-Chan

2016-01-01

The main purposes of this study were to develop bi-factor multidimensional item response theory (BF-MIRT) observed-score equating procedures for mixed-format tests and to investigate relative appropriateness of the proposed procedures. Using data from a large-scale testing program, three types of pseudo data sets were formulated: matched samples,…

A Model-Based Approach for Visualizing the Dimensional Structure of Ordered Successive Categories Preference Data

ERIC Educational Resources Information Center

DeSarbo, Wayne S.; Park, Joonwook; Scott, Crystal J.

2008-01-01

A cyclical conditional maximum likelihood estimation procedure is developed for the multidimensional unfolding of two- or three-way dominance data (e.g., preference, choice, consideration) measured on ordered successive category rating scales. The technical description of the proposed model and estimation procedure are discussed, as well as the…

Designing of network planning system for small-scale manufacturing

NASA Astrophysics Data System (ADS)

Kapulin, D. V.; Russkikh, P. A.; Vinnichenko, M. V.

2018-05-01

The paper presents features of network planning in small-scale discrete production. The procedure of explosion of the production order, considering multilevel representation, is developed. The software architecture is offered. Approbation of the network planning system is carried out. This system allows carrying out dynamic updating of the production plan.

Sensitivity analysis for large-scale problems

NASA Technical Reports Server (NTRS)

Noor, Ahmed K.; Whitworth, Sandra L.

1987-01-01

The development of efficient techniques for calculating sensitivity derivatives is studied. The objective is to present a computational procedure for calculating sensitivity derivatives as part of performing structural reanalysis for large-scale problems. The scope is limited to framed type structures. Both linear static analysis and free-vibration eigenvalue problems are considered.

The ordering of milestones in language development for children from 1 to 6 years of age.

PubMed

Luinge, Margreet R; Post, Wendy J; Wit, Hero P; Goorhuis-Brouwer, Sieneke M

2006-10-01

To scale language milestones in a group of 527 children to provide an instrument for screening language development. Procedure The questionnaire regarding these milestones was completed by parental report. It was evaluated whether the scaled milestones satisfied the assumptions of the Mokken item response model. The scalability of the final scale of 14 milestones was strong (H = .95), its reliability was high (rho = .96), and it satisfied the assumptions of the Mokken model. A single, unidimensional scale of diverse milestones was developed. It taps lexical, syntactic, and phonological skills, as well as both receptive and expressive language skills, and is well suited for mapping progress in language ability.

Assessment of modal-pushover-based scaling procedure for nonlinear response history analysis of ordinary standard bridges

USGS Publications Warehouse

Kalkan, E.; Kwong, N.

2012-01-01

The earthquake engineering profession is increasingly utilizing nonlinear response history analyses (RHA) to evaluate seismic performance of existing structures and proposed designs of new structures. One of the main ingredients of nonlinear RHA is a set of ground motion records representing the expected hazard environment for the structure. When recorded motions do not exist (as is the case in the central United States) or when high-intensity records are needed (as is the case in San Francisco and Los Angeles), ground motions from other tectonically similar regions need to be selected and scaled. The modal-pushover-based scaling (MPS) procedure was recently developed to determine scale factors for a small number of records such that the scaled records provide accurate and efficient estimates of “true” median structural responses. The adjective “accurate” refers to the discrepancy between the benchmark responses and those computed from the MPS procedure. The adjective “efficient” refers to the record-to-record variability of responses. In this paper, the accuracy and efficiency of the MPS procedure are evaluated by applying it to four types of existing Ordinary Standard bridges typical of reinforced concrete bridge construction in California. These bridges are the single-bent overpass, multi-span bridge, curved bridge, and skew bridge. As compared with benchmark analyses of unscaled records using a larger catalog of ground motions, it is demonstrated that the MPS procedure provided an accurate estimate of the engineering demand parameters (EDPs) accompanied by significantly reduced record-to-record variability of the EDPs. Thus, it is a useful tool for scaling ground motions as input to nonlinear RHAs of Ordinary Standard bridges.

Automated riverine landscape characterization: GIS-based tools for watershed-scale research, assessment, and management.

PubMed

Williams, Bradley S; D'Amico, Ellen; Kastens, Jude H; Thorp, James H; Flotemersch, Joseph E; Thoms, Martin C

2013-09-01

River systems consist of hydrogeomorphic patches (HPs) that emerge at multiple spatiotemporal scales. Functional process zones (FPZs) are HPs that exist at the river valley scale and are important strata for framing whole-watershed research questions and management plans. Hierarchical classification procedures aid in HP identification by grouping sections of river based on their hydrogeomorphic character; however, collecting data required for such procedures with field-based methods is often impractical. We developed a set of GIS-based tools that facilitate rapid, low cost riverine landscape characterization and FPZ classification. Our tools, termed RESonate, consist of a custom toolbox designed for ESRI ArcGIS®. RESonate automatically extracts 13 hydrogeomorphic variables from readily available geospatial datasets and datasets derived from modeling procedures. An advanced 2D flood model, FLDPLN, designed for MATLAB® is used to determine valley morphology by systematically flooding river networks. When used in conjunction with other modeling procedures, RESonate and FLDPLN can assess the character of large river networks quickly and at very low costs. Here we describe tool and model functions in addition to their benefits, limitations, and applications.

Micro-scale experimental study of Microbial-Induced Carbonate Precipitation (MICP) by using microfluidic devices

NASA Astrophysics Data System (ADS)

Wang, Y.; Soga, K.; DeJong, J. T.; Kabla, A.

2017-12-01

Microbial-induced carbonate precipitation (MICP), one of the bio-mineralization processes, is an innovative subsurface improvement technique for enhancing the strength and stiffness of soils, and controlling their hydraulic conductivity. These macro-scale engineering properties of MICP treated soils controlled by micro-scale factors of the precipitated carbonate, such as its content, amount and distribution in the soil matrix. The precipitation process itself is affected by bacteria amount, reaction kinetics, porous medium geometry and flow distribution in the soils. Accordingly, to better understand the MICP process at the pore scale a new experimental technique that can observe the entire process of MICP at the pore-scale was developed. In this study, a 2-D transparent microfluidic chip made of Polydimethylsiloxane (PDMS) representing the soil matrix was designed and fabricated. A staged-injection MICP treatment procedure was simulated inside the microfluidic chip while continuously monitored using microscopic techniques. The staged-injection MICP treatment procedure started with the injection of bacteria suspension, followed with the bacteria setting for attachment, and then ended with the multiple injections of cementation liquid. The main MICP processes visualized during this procedure included the bacteria transport and attachment during the bacteria injection, the bacteria attachment and growth during the bacteria settling, the bacteria detachment during the cementation liquid injection, the cementation development during the cementation liquid injection, and the cementation development after the completion of cementation liquid injection. It is suggested that the visualization of the main MICP processes using the microfluidic technique can improve understating of the fundamental mechanisms of MICP and consequently help improve the treatment technique for in situ implementation of MICP.

Procedures for estimation of the livestock ecological footprint of US drylands

Treesearch

Robert A. Washington-Allen; John E. Mitchell

2008-01-01

The ecological condition and trend of the United States' 3,902,000 of Drylands and the extent to which human management actions contribute to degradation are unknown at the national spatial scale. (Washington-Allen et al. 2006). Our research seeks to develop procedures for determining the impact or ecological footprint of livestock grazing on the productive...

Comparative Validity of the Shedler and Westen Assessment Procedure-200

ERIC Educational Resources Information Center

Mullins-Sweatt, Stephanie N.; Widiger, Thomas A.

2008-01-01

A predominant dimensional model of general personality structure is the five-factor model (FFM). Quite a number of alternative instruments have been developed to assess the domains of the FFM. The current study compares the validity of 2 alternative versions of the Shedler and Westen Assessment Procedure (SWAP-200) FFM scales, 1 that was developed…

Development and Validation of the Elder Learning Barriers Scale Among Older Chinese Adults.

PubMed

Wang, Renfeng; De Donder, Liesbeth; De Backer, Free; He, Tao; Van Regenmortel, Sofie; Li, Shihua; Lombaerts, Koen

2017-12-01

This study describes the development and validation of the Elder Learning Barriers (ELB) scale, which seeks to identify the obstacles that affect the level of educational participation of older adults. The process of item pool design and scale development is presented, as well as the testing and scale refinement procedure. The data were collected from a sample of 579 older Chinese adults (aged over 55) in the Xi'an region of China. After randomly splitting the sample for cross-validation purposes, the construct validity of the ELB scale was confirmed containing five dimensions: dispositional, informational, physical, situational, and institutional barriers. Furthermore, developmental differences in factor structure have been examined among older age groups. The results indicated that the scale demonstrated good reliability and validity. We conclude in general that the ELB scale appears to be a valuable instrument for examining the learning barriers that older Chinese citizens experience for participating in organized educational activities.

Patients' perceptions and responses to procedural pain: results from Thunder Project II.

PubMed

Puntillo, K A; White, C; Morris, A B; Perdue, S T; Stanik-Hutt, J; Thompson, C L; Wild, L R

2001-07-01

Little is known about the painfulness of procedures commonly performed in acute and critical care settings. To describe pain associated with turning, wound drain removal, tracheal suctioning, femoral catheter removal, placement of a central venous catheter, and nonburn wound dressing change and frequency of use of analgesics during procedures. A comparative, descriptive design was used. Numeric rating scales were used to measure pain intensity and procedural distress; word lists, to measure pain quality. Data were obtained from 6201 patients: 176 younger than 18 years and 5957 adults. Mean pain intensity scores for turning and tracheal suctioning were 2.80 and 3.00, respectively (scale, 0-5), for 4- to 7-year-olds and 52.0 and 28.1 (scale, 0-100) for 8- to 12-year-olds. For adolescents, mean pain intensity scores for wound dressing change, turning, tracheal suctioning, and wound drain removal were 5 to 7 (scale, 0-10); mean procedural distress scores were 4.83 to 6.00 (scale, 0-10). In adults, mean pain intensity scores for all procedures were 2.65 to 4.93 (scale, 0-10); mean procedural distress scores were 1.89 to 3.47 (scale, 0-10). The most painful and distressing procedures were turning for adults and wound care for adolescents. Procedural pain was often described as sharp, stinging, stabbing, shooting, and awful. Less than 20% of patients received opiates before procedures. Procedural pain varies considerably and is procedure specific. Because procedures are performed so often, more individualized attention to preparation for and control of procedural pain is warranted.

Consensus-based training and assessment model for general surgery.

PubMed

Szasz, P; Louridas, M; de Montbrun, S; Harris, K A; Grantcharov, T P

2016-05-01

Surgical education is becoming competency-based with the implementation of in-training milestones. Training guidelines should reflect these changes and determine the specific procedures for such milestone assessments. This study aimed to develop a consensus view regarding operative procedures and tasks considered appropriate for junior and senior trainees, and the procedures that can be used as technical milestone assessments for trainee progression in general surgery. A Delphi process was followed where questionnaires were distributed to all 17 Canadian general surgery programme directors. Items were ranked on a 5-point Likert scale, with consensus defined as Cronbach's α of at least 0·70. Items rated 4 or above on the 5-point Likert scale by 80 per cent of the programme directors were included in the models. Two Delphi rounds were completed, with 14 programme directors taking part in round one and 11 in round two. The overall consensus was high (Cronbach's α = 0·98). The training model included 101 unique procedures and tasks, 24 specific to junior trainees, 68 specific to senior trainees, and nine appropriate to all. The assessment model included four procedures. A system of operative procedures and tasks for junior- and senior-level trainees has been developed along with an assessment model for trainee progression. These can be used as milestones in competency-based assessments. © 2016 BJS Society Ltd Published by John Wiley & Sons Ltd.

Conditional standard errors of measurement for composite scores on the Wechsler Preschool and Primary Scale of Intelligence-Third Edition.

PubMed

Price, Larry R; Raju, Nambury; Lurie, Anna; Wilkins, Charles; Zhu, Jianjun

2006-02-01

A specific recommendation of the 1999 Standards for Educational and Psychological Testing by the American Educational Research Association, the American Psychological Association, and the National Council on Measurement in Education is that test publishers report estimates of the conditional standard error of measurement (SEM). Procedures for calculating the conditional (score-level) SEM based on raw scores are well documented; however, few procedures have been developed for estimating the conditional SEM of subtest or composite scale scores resulting from a nonlinear transformation. Item response theory provided the psychometric foundation to derive the conditional standard errors of measurement and confidence intervals for composite scores on the Wechsler Preschool and Primary Scale of Intelligence-Third Edition.

Measuring Engagement in Later Life Activities: Rasch-Based Scenario Scales for Work, Caregiving, Informal Helping, and Volunteering

ERIC Educational Resources Information Center

Ludlow, Larry H.; Matz-Costa, Christina; Johnson, Clair; Brown, Melissa; Besen, Elyssa; James, Jacquelyn B.

2014-01-01

The development of Rasch-based "comparative engagement scenarios" based on Guttman's facet theory and sentence mapping procedures is described. The scenario scales measuring engagement in work, caregiving, informal helping, and volunteering illuminate the lived experiences of role involvement among older adults and offer multiple…

Developing and Validating a Rapid Small-Scale Column Test Procedure for GAC Selection using Reconstituted Lyophilized NOM

EPA Science Inventory

Cost effective design and operation of Granular Activated Carbon (GAC) facilities requires the selection of GAC that is optimal for a specific site. Rapid small-scale column tests (RSSCTs) are widely used for GAC assessment due to several advantages, including the ability to simu...

Evaluation of Scale Reliability with Binary Measures Using Latent Variable Modeling

ERIC Educational Resources Information Center

Raykov, Tenko; Dimitrov, Dimiter M.; Asparouhov, Tihomir

2010-01-01

A method for interval estimation of scale reliability with discrete data is outlined. The approach is applicable with multi-item instruments consisting of binary measures, and is developed within the latent variable modeling methodology. The procedure is useful for evaluation of consistency of single measures and of sum scores from item sets…

Developing and Validating a Rapid Small-Scale Column Test Procedure for GAC Selection using Reconstituted Lyophilized NOM - Portland, OR

EPA Science Inventory

Cost effective design and operation of Granular Activated Carbon (GAC) facilities requires the selection of GAC that is optimal for a specific site. Rapid small-scale column tests (RSSCTs) are widely used for GAC assessment due to several advantages, including the ability to simu...

Regional-scale integration of hydrological and geophysical data using Bayesian sequential simulation: application to field data

NASA Astrophysics Data System (ADS)

Ruggeri, Paolo; Irving, James; Gloaguen, Erwan; Holliger, Klaus

2013-04-01

Significant progress has been made with regard to the quantitative integration of geophysical and hydrological data at the local scale. However, extending corresponding approaches to the regional scale still represents a major challenge, yet is critically important for the development of groundwater flow and contaminant transport models. To address this issue, we have developed a regional-scale hydrogeophysical data integration technique based on a two-step Bayesian sequential simulation procedure. The objective is to simulate the regional-scale distribution of a hydraulic parameter based on spatially exhaustive, but poorly resolved, measurements of a pertinent geophysical parameter and locally highly resolved, but spatially sparse, measurements of the considered geophysical and hydraulic parameters. To this end, our approach first involves linking the low- and high-resolution geophysical data via a downscaling procedure before relating the downscaled regional-scale geophysical data to the high-resolution hydraulic parameter field. We present the application of this methodology to a pertinent field scenario, where we consider collocated high-resolution measurements of the electrical conductivity, measured using a cone penetrometer testing (CPT) system, and the hydraulic conductivity, estimated from EM flowmeter and slug test measurements, in combination with low-resolution exhaustive electrical conductivity estimates obtained from dipole-dipole ERT meausurements.

Psychometric properties of the Tuckman Procrastination Scale in a Turkish sample.

PubMed

Ozer, Bilge Uzun; Saçkes, Mesut; Tuckman, Bruce W

2013-12-01

A stepwise validation procedure was carried out to translate and develop a Turkish version of the Tuckman Procrastination Scale. A total of 858 college students completed the Tuckman Procrastination Scale, the Academic Self-efficacy Scale, and the Rosenberg Self-esteem Scale. Two items in the original scale loaded on a different factor and were removed from the measure. The 14-item scale had a one-factor solution as supported by subsequent confirmatory factor analysis. The Turkish version of the Tuckman Procrastination Scale scores correlated negatively with academic self-efficacy and self-esteem scores. Overall results provided evidence for the validity and the reliability of the scale scores.

Identification and evaluation of software measures

NASA Technical Reports Server (NTRS)

Card, D. N.

1981-01-01

A large scale, systematic procedure for identifying and evaluating measures that meaningfully characterize one or more elements of software development is described. The background of this research, the nature of the data involved, and the steps of the analytic procedure are discussed. An example of the application of this procedure to data from real software development projects is presented. As the term is used here, a measure is a count or numerical rating of the occurrence of some property. Examples of measures include lines of code, number of computer runs, person hours expended, and degree of use of top down design methodology. Measures appeal to the researcher and the manager as a potential means of defining, explaining, and predicting software development qualities, especially productivity and reliability.

Establishing Reliable Cognitive Change in Children with Epilepsy: The Procedures and Results for a Sample with Epilepsy

ERIC Educational Resources Information Center

van Iterson, Loretta; Augustijn, Paul B.; de Jong, Peter F.; van der Leij, Aryan

2013-01-01

The goal of this study was to investigate reliable cognitive change in epilepsy by developing computational procedures to determine reliable change index scores (RCIs) for the Dutch Wechsler Intelligence Scales for Children. First, RCIs were calculated based on stability coefficients from a reference sample. Then, these RCIs were applied to a…

Assessing Competence in Pediatric Cardiology

ERIC Educational Resources Information Center

Johnson, Apul E.; And Others

1976-01-01

In response to the need to assure physician competence, a rating scale was developed at the University of Minnesota Medical School for use in evaluating clinical competence in pediatric cardiology. It was tested on first- and second-year specialists. Development and testing procedures are described. (JT)

High-throughput process development of an alternative platform for the production of virus-like particles in Escherichia coli.

PubMed

Ladd Effio, Christopher; Baumann, Pascal; Weigel, Claudia; Vormittag, Philipp; Middelberg, Anton; Hubbuch, Jürgen

2016-02-10

The production of safe vaccines against untreatable or new diseases has pushed the research in the field of virus-like particles (VLPs). Currently, a large number of commercial VLP-based human vaccines and vaccine candidates are available or under development. A promising VLP production route is the controlled in vitro assembly of virus proteins into capsids. In the study reported here, a high-throughput screening (HTS) procedure was implemented for the upstream process development of a VLP platform in bacterial cell systems. Miniaturized cultivations were carried out in 48-well format in the BioLector system (m2p-Labs, Germany) using an Escherichia coli strain with a tac promoter producing the murine polyomavirus capsid protein (VP1). The screening procedure incorporated micro-scale cultivations, HTS cell disruption by sonication and HTS-compatible analytics by capillary gel electrophoresis. Cultivation temperatures, shaking speeds, induction and medium conditions were varied to optimize the product expression in E. coli. The most efficient system was selected based on an evaluation of soluble and insoluble product concentrations as well as on the percentage of product in the total soluble protein fraction. The optimized system was scaled up to cultivation 2.5L shaker flask scale and purified using an anion exchange chromatography membrane adsorber, followed by a size exclusion chromatography polishing procedure. For proof of concept, purified VP1 capsomeres were assembled under defined buffer conditions into empty capsids and characterized using transmission electron microscopy (TEM). The presented HTS procedure allowed for a fast development of an efficient production process of VLPs in E. coli. Under optimized cultivation conditions, the VP1 product totalled up to 43% of the total soluble protein fraction, yielding 1.63 mg VP1 per mL of applied cultivation medium. The developed production process strongly promotes the murine polyoma-VLP platform, moving towards an industrially feasible technology for new chimeric vaccines. Copyright © 2015 Elsevier B.V. All rights reserved.

Proposal of a framework for scale-up life cycle inventory: A case of nanofibers for lithium iron phosphate cathode applications.

PubMed

Simon, Bálint; Bachtin, Krystyna; Kiliç, Ali; Amor, Ben; Weil, Marcel

2016-07-01

Environmental assessments are crucial for the management of the environmental impacts of a product in a rapidly developing world. The design phase creates opportunities for acting on the environmental issues of products using life cycle assessment (LCA). However, the LCA is hampered by a lack of information originating from distinct scales along the product or technology value chain. Many studies have been undertaken to handle similar problems, but these studies are case-specific and do not analyze the development options in the initial design phase. Thus, systematic studies are needed to determine the possible scaling. Knowledge from such screening studies would open the door for developing new methods that can tackle a given scaling problem. The present article proposes a scale-up procedure that aims to generate a new life cycle inventory (LCI) on a theoretical industrial scale, based on information from laboratory experiments. Three techniques are described to obtain the new LCI. Investigation of a laboratory-scale procedure is discussed to find similar industrial processes as a benchmark for describing a theoretical large-scale production process. Furthermore, LCA was performed on a model system of nanofiber electrospinning for Li-ion battery cathode applications. The LCA results support material developers in identifying promising development pathways. For example, the present study pointed out the significant impacts of dimethylformamide on suspension preparation and the power requirements of distinct electrospinning subprocesses. Nanofiber-containing battery cells had greater environmental impacts than did the reference cell, although they had better electrochemical performance, such as better wettability of the electrode, improving the electrode's electrosorption capacity, and longer expected lifetime. Furthermore, material and energy recovery throughout the production chain could decrease the environmental impacts by 40% to 70%, making the nanofiber a promising battery cathode. Integr Environ Assess Manag 2016;12:465-477. © 2016 SETAC. © 2016 SETAC.

[Multimodal distraction to relieve pain in children undergoing acute medical procedures].

PubMed

Miller, Kate; Rodger, Sylvia; Bucolo, Sam; Wang, Xue-Qing; Kimble, Roy M

2009-10-01

Non-pharmacological approaches to pain management have been used by therapists for decades to reduce the anxiety and pain experienced by children during burn care procedures. With a greater understanding of pain and the principles behind what causes a child to be distracted, combined with access to state of the art technology, we have developed an easy to use, hand held multimodal distraction device (MMD). MMD is an interactive device that prepares the child for a procedure and uses developmentally appropriate distraction stories and games during the procedures to alleviate anxiety and pain. This paper summarizes the results of three randomized control trials. The trials aimed to understand the effectiveness of MMD as a distraction and preparation tool in reducing anxiety and pain in children undergoing burns and non-burns medical procedures compared to pure pharmacological approaches Standard Distraction (SD) and off the shelf video games (VG). Three separate prospective randomized control trials involving 182 children having 354 dressing changes were conducted in the burns and orthopedic departments at Royal Children's Hospital, Brisbane, Australia, to address the above aims. Pain and anxiety scores were completed for the child, caregiver and nursing staff according to the Modified Faces, Legs, Activity, Cry and Consolability Scale, Faces Pain Scale-Revised, Visual Analogue Scale and Wong-Baker Faces Pain Rating Scale. Procedural length was recorded. MMD as a preparation and distraction tool were shown to have a significant impact on child, parent and nursing staff reported anxiety and pain during procedures compared to standard care and video games (P < 0.01). The MMD had a positive effect on clinical time and was shown to sustain its impact on pain and time with further dressing changes. MMD is more effective in reducing the pain and anxiety experienced by children in acute medical procedures as compared with SD and VG. MMD is continuing to be trialed and is continuing to show positive clinical outcomes.

Scaling of Performance in Liquid Propellant Rocket Engine Combustors

NASA Technical Reports Server (NTRS)

Hulka, James R.

2007-01-01

This paper discusses scaling of combustion and combustion performance in liquid propellant rocket engine combustion devices. In development of new combustors, comparisons are often made between predicted performance in a new combustor and measured performance in another combustor with different geometric and thermodynamic characteristics. Without careful interpretation of some key features, the comparison can be misinterpreted and erroneous information used in the design of the new device. This paper provides a review of this performance comparison, including a brief review of the initial liquid rocket scaling research conducted during the 1950s and 1960s, a review of the typical performance losses encountered and how they scale, a description of the typical scaling procedures used in development programs today, and finally a review of several historical development programs to see what insight they can bring to the questions at hand.

Scaling of Performance in Liquid Propellant Rocket Engine Combustion Devices

NASA Technical Reports Server (NTRS)

Hulka, James R.

2008-01-01

This paper discusses scaling of combustion and combustion performance in liquid propellant rocket engine combustion devices. In development of new combustors, comparisons are often made between predicted performance in a new combustor and measured performance in another combustor with different geometric and thermodynamic characteristics. Without careful interpretation of some key features, the comparison can be misinterpreted and erroneous information used in the design of the new device. This paper provides a review of this performance comparison, including a brief review of the initial liquid rocket scaling research conducted during the 1950s and 1960s, a review of the typical performance losses encountered and how they scale, a description of the typical scaling procedures used in development programs today, and finally a review of several historical development programs to see what insight they can bring to the questions at hand.

Designing an External Evaluation of a Large-Scale Software Development Project.

ERIC Educational Resources Information Center

Collis, Betty; Moonen, Jef

This paper describes the design and implementation of the evaluation of the POCO Project, a large-scale national software project in the Netherlands which incorporates the perspective of an evaluator throughout the entire span of the project, and uses the experiences gained from it to suggest an evaluation procedure that could be applied to other…

Evaluation of Hydrogel Technologies for the Decontamination ...

EPA Pesticide Factsheets

Report This current research effort was developed to evaluate intermediate level (between bench-scale and large-scale or wide-area implementation) decontamination procedures, materials, technologies, and techniques used to remove radioactive material from different surfaces. In the event of such an incident, application of this technology would primarily be intended for decontamination of high-value buildings, important infrastructure, and landmarks.

Adaptive Assessment of Young Children with Visual Impairment

ERIC Educational Resources Information Center

Ruiter, Selma; Nakken, Han; Janssen, Marleen; Van Der Meulen, Bieuwe; Looijestijn, Paul

2011-01-01

The aim of this study was to assess the effect of adaptations for children with low vision of the Bayley Scales, a standardized developmental instrument widely used to assess development in young children. Low vision adaptations were made to the procedures, item instructions and play material of the Dutch version of the Bayley Scales of Infant…

Measuring the Quality of Life of University Students. Research Monograph Series. Volume 1.

ERIC Educational Resources Information Center

Roberts, Lance W.; Clifton, Rodney A.

This study sought to develop a valid set of scales in the cognitive and affective domains for measuring the quality of life of university students. In addition the study attempted to illustrate the usefulness of Thomas Piazza's procedures for constructing valid scales in educational research. Piazza's method involves a multi-step construction of…

Assessing Psychosocial Impairment in Children and Adolescents: A Review of the Barkley Functional Impairment Scale (BFIS)

ERIC Educational Resources Information Center

McGill, Ryan J.

2014-01-01

Appraising psychosocial impairment is an essential enterprise of diagnostic decision-making in the field of school psychology. Despite its importance, few practitioners utilize systematic procedures when engaging in this process, despite the fact that a number of impairment measures and scales have been developed specifically for this purpose. The…

Interval Estimation of Revision Effect on Scale Reliability via Covariance Structure Modeling

ERIC Educational Resources Information Center

Raykov, Tenko

2009-01-01

A didactic discussion of a procedure for interval estimation of change in scale reliability due to revision is provided, which is developed within the framework of covariance structure modeling. The method yields ranges of plausible values for the population gain or loss in reliability of unidimensional composites, which results from deletion or…

Modeling Change in Large-Scale Longitudinal Studies of Educational Growth: Four Decades of Contributions to the Assessment of Educational Growth. ETC R&D Scientific and Policy Contributions Series. ETS SPC-12-01. Research Report No. RR-12-04

ERIC Educational Resources Information Center

Rock, Donald A.

2012-01-01

This paper provides a history of ETS's role in developing assessment instruments and psychometric procedures for measuring change in large-scale national assessments funded by the Longitudinal Studies branch of the National Center for Education Statistics. It documents the innovations developed during more than 30 years of working with…

Modeling Change in Large-Scale Longitudinal Studies of Educational Growth: Four Decades of Contributions to the Assessment of Educational Growth. Research Report. ETS RR-12-04. ETS R&D Scientific and Policy Contributions Series. ETS SPC-12-01

ERIC Educational Resources Information Center

Rock, Donald A.

2012-01-01

This paper provides a history of ETS's role in developing assessment instruments and psychometric procedures for measuring change in large-scale national assessments funded by the Longitudinal Studies branch of the National Center for Education Statistics. It documents the innovations developed during more than 30 years of working with…

False Discovery Control in Large-Scale Spatial Multiple Testing

PubMed Central

Sun, Wenguang; Reich, Brian J.; Cai, T. Tony; Guindani, Michele; Schwartzman, Armin

2014-01-01

Summary This article develops a unified theoretical and computational framework for false discovery control in multiple testing of spatial signals. We consider both point-wise and cluster-wise spatial analyses, and derive oracle procedures which optimally control the false discovery rate, false discovery exceedance and false cluster rate, respectively. A data-driven finite approximation strategy is developed to mimic the oracle procedures on a continuous spatial domain. Our multiple testing procedures are asymptotically valid and can be effectively implemented using Bayesian computational algorithms for analysis of large spatial data sets. Numerical results show that the proposed procedures lead to more accurate error control and better power performance than conventional methods. We demonstrate our methods for analyzing the time trends in tropospheric ozone in eastern US. PMID:25642138

Audiovisual distraction for pain relief in paediatric inpatients: A crossover study.

PubMed

Oliveira, N C A C; Santos, J L F; Linhares, M B M

2017-01-01

Pain is a stressful experience that can have a negative impact on child development. The aim of this crossover study was to examine the efficacy of audiovisual distraction for acute pain relief in paediatric inpatients. The sample comprised 40 inpatients (6-11 years) who underwent painful puncture procedures. The participants were randomized into two groups, and all children received the intervention and served as their own controls. Stress and pain-catastrophizing assessments were initially performed using the Child Stress Scale and Pain Catastrophizing Scale for Children, with the aim of controlling these variables. The pain assessment was performed using a Visual Analog Scale and the Faces Pain Scale-Revised after the painful procedures. Group 1 received audiovisual distraction before and during the puncture procedure, which was performed again without intervention on another day. The procedure was reversed in Group 2. Audiovisual distraction used animated short films. A 2 × 2 × 2 analysis of variance for 2 × 2 crossover study was performed, with a 5% level of statistical significance. The two groups had similar baseline measures of stress and pain catastrophizing. A significant difference was found between periods with and without distraction in both groups, in which scores on both pain scales were lower during distraction compared with no intervention. The sequence of exposure to the distraction intervention in both groups and first versus second painful procedure during which the distraction was performed also significantly influenced the efficacy of the distraction intervention. Audiovisual distraction effectively reduced the intensity of pain perception in paediatric inpatients. The crossover study design provides a better understanding of the power effects of distraction for acute pain management. Audiovisual distraction was a powerful and effective non-pharmacological intervention for pain relief in paediatric inpatients. The effects were detected in subsequent acute painful procedures. © 2016 European Pain Federation - EFIC®.

Factors explaining children's responses to intravenous needle insertions.

PubMed

McCarthy, Ann Marie; Kleiber, Charmaine; Hanrahan, Kirsten; Zimmerman, M Bridget; Westhus, Nina; Allen, Susan

2010-01-01

Previous research shows that numerous child, parent, and procedural variables affect children's distress responses to procedures. Cognitive-behavioral interventions such as distraction are effective in reducing pain and distress for many children undergoing these procedures. The purpose of this report was to examine child, parent, and procedural variables that explain child distress during a scheduled intravenous insertion when parents are distraction coaches for their children. A total of 542 children, between 4 and 10 years of age, and their parents participated. Child age, gender, diagnosis, and ethnicity were measured by questions developed for this study. Standardized instruments were used to measure child experience with procedures, temperament, ability to attend, anxiety, coping style, and pain sensitivity. Questions were developed to measure parent variables, including ethnicity, gender, previous experiences, and expectations, and procedural variables, including use of topical anesthetics and difficulty of procedure. Standardized instruments were used to measure parenting style and parent anxiety, whereas a new instrument was developed to measure parent performance of distraction. Children's distress responses were measured with the Observation Scale of Behavioral Distress-Revised (behavioral), salivary cortisol (biological), Oucher Pain Scale (self-report), and parent report of child distress (parent report). Regression methods were used for data analyses. Variables explaining behavioral, child-report and parent-report measures include child age, typical coping response, and parent expectation of distress (p < .01). Level of parents' distraction coaching explained a significant portion of behavioral, biological, and parent-report distress measures (p < .05). Child impulsivity and special assistance at school also significantly explained child self-report of pain (p < .05). Additional variables explaining cortisol response were child's distress in the morning before clinic, diagnoses of attention deficit hyperactivity disorder or anxiety disorder, and timing of preparation for the clinic visit. The findings can be used to identify children at risk for high distress during procedures. This is the first study to find a relationship between child behavioral distress and level of parent distraction coaching.

Micro-telerobotic applications for microsurgery

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ford, W.E.; Morimoto, A.K.; Kozlowski, D.M.

MicroDexterity Systems Inc. and Sandia National Laboratories are collaborating on the design of a six degree-of-freedom surgeon-controlled micropositioner and a six degree-of-freedom surgeon-controlled master for use in microsurgery. A control system will provide the linkage between the force-reflecting master and micropositioner for force scaling, position scaling, and tremor filtering. The technologies developed by this project are expected to enhance the skills of surgeons, improve the success rates for existing microsurgical procedures, make new high-dexterity procedures possible, and ultimately reduce surgical costs by increasing the precision and speed of operations. This paper discusses the motivation, approach, and accomplishments to date.

Development of a School Bus Fuel System Integrity Compliance Procedure. Final Report.

ERIC Educational Resources Information Center

Morrow, G. W.; Johnson, N. B.

This report presents a program that derived a compliance test procedure for school buses with a gross vehicle weight of 10,000 pounds or greater. The objective of this program was to evaluate Fuel System Integrity (FMVSS 301) in relation to school buses, conduct a limited state-of-the-art survey and run full-scale dynamic tests to produce an…

Application of the Flood-IMPAT procedure in the Valle d'Aosta Region, Italy

NASA Astrophysics Data System (ADS)

Minucci, Guido; Mendoza, Marina Tamara; Molinari, Daniela; Atun, Funda; Menoni, Scira; Ballio, Francesco

2016-04-01

Flood Risk Management Plans (FRMPs) established by European "Floods" Directive (Directive 2007/60/EU) to Member States in order to address all aspects of flood risk management, taking into account costs and benefits of proposed mitigation tools must be reviewed by the same law every six years. This is aimed at continuously increasing the effectiveness of risk management, on the bases of the most advanced knowledge of flood risk and most (economically) feasible solutions, also taking into consideration achievements of the previous management cycle. Within this context, the Flood-IMPAT (i.e. Integrated Meso-scale Procedure to Assess Territorial flood risk) procedure has been developed aiming at overcoming limits of risk maps produced by the Po River Basin Authority and adopted for the first version of the Po River FRMP. The procedure allows the estimation of flood risk at the meso-scale and it is characterized by three main peculiarities. First is its feasibility for the entire Italian territory. Second is the possibility to express risk in monetary terms (i.e. expected damage), at least for those categories of damage for which suitable models are available. Finally, independent modules compose the procedure: each module allows the estimation of a certain type of damage (i.e. direct, indirect, intangibles) on a certain sector (e.g. residential, industrial, agriculture, environment, etc.) separately, guaranteeing flexibility in the implementation. This paper shows the application of the Flood-IMPAT procedure and the recent advancements in the procedure, aiming at increasing its reliability and usability. Through a further implementation of the procedure in the Dora Baltea River Basin (North of Italy), it was possible to test the sensitivity of risk estimates supplied by Flood-IMPAT with respect to different damage models and different approaches for the estimation of assets at risk. Risk estimates were also compared with observed damage data in the investigated areas to identify the most suitable damage model/exposure assessment approach to be implemented in the procedure. In the end, the procedure was adapted to be applied at the micro-scale, in such a way to supply risk estimates, which are coherent with those at the meso-scale. This way the procedure can be first implemented in the whole catchment to identify hotspots; the micro-scale approach can be implemented in a second run to investigate in depth (i) the most risk prone areas and (ii) the possible risk mitigation strategies.

Prospective Cohort Study Investigating Changes in Body Image, Quality of Life, and Self-Esteem Following Minimally Invasive Cosmetic Procedures.

PubMed

Sobanko, Joseph F; Dai, Julia; Gelfand, Joel M; Sarwer, David B; Percec, Ivona

2018-04-13

Minimally invasive cosmetic injectable procedures are increasingly common. However, a few studies have investigated changes in psychosocial functioning following these treatments. To assess changes in body image, quality of life, and self-esteem following cosmetic injectable treatment with soft tissue fillers and neuromodulators. Open, prospective study of 75 patients undergoing cosmetic injectable procedures for facial aging to evaluate changes in psychosocial functioning within 6 weeks of treatment. Outcome measures included the Derriford appearance scale (DAS-24), body image quality of life inventory (BIQLI), and the Rosenberg self-esteem scale. Body image dissatisfaction, as assessed by the DAS-24, improved significantly 6 weeks after the treatment. Body image quality of life, as assessed by the BIQLI, improved, but the change did not reach statistical significance. Self-esteem was unchanged after the treatment. Minimally invasive cosmetic injectable procedures were associated with reductions in body image dissatisfaction. Future research, using recently developed cosmetic surgery-specific instruments, may provide further insight into the psychosocial benefits of minimally invasive procedures.

TU-D-209-03: Alignment of the Patient Graphic Model Using Fluoroscopic Images for Skin Dose Mapping

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oines, A; Oines, A; Kilian-Meneghin, J

2016-06-15

Purpose: The Dose Tracking System (DTS) was developed to provide realtime feedback of skin dose and dose rate during interventional fluoroscopic procedures. A color map on a 3D graphic of the patient represents the cumulative dose distribution on the skin. Automated image correlation algorithms are described which use the fluoroscopic procedure images to align and scale the patient graphic for more accurate dose mapping. Methods: Currently, the DTS employs manual patient graphic selection and alignment. To improve the accuracy of dose mapping and automate the software, various methods are explored to extract information about the beam location and patient morphologymore » from the procedure images. To match patient anatomy with a reference projection image, preprocessing is first used, including edge enhancement, edge detection, and contour detection. Template matching algorithms from OpenCV are then employed to find the location of the beam. Once a match is found, the reference graphic is scaled and rotated to fit the patient, using image registration correlation functions in Matlab. The algorithm runs correlation functions for all points and maps all correlation confidences to a surface map. The highest point of correlation is used for alignment and scaling. The transformation data is saved for later model scaling. Results: Anatomic recognition is used to find matching features between model and image and image registration correlation provides for alignment and scaling at any rotation angle with less than onesecond runtime, and at noise levels in excess of 150% of those found in normal procedures. Conclusion: The algorithm provides the necessary scaling and alignment tools to improve the accuracy of dose distribution mapping on the patient graphic with the DTS. Partial support from NIH Grant R01-EB002873 and Toshiba Medical Systems Corp.« less

Toward Developing a Relative Value Scale for Medical and Surgical Services

PubMed Central

Hsiao, William C.; Stason, William B.

1979-01-01

A methodology has been developed to determine the relative values of surgical procedures and medical office visits on the basis of resource costs. The time taken to perform the service and the complexity of that service are the most critical variables. Interspecialty differences in the opportunity costs of training and overhead expenses are also considered. Results indicate some important differences between the relative values based on resource costs and existing standards, prevailing Medicare charges, and California Relative Value Study values. Most dramatic are discrepancies between existing reimbursement levels and resource cost values for office visits compared to surgical procedures. These vary from procedure to procedure and specialty to specialty but indicate that, on the average, office visits are undervalued (or surgical procedures overvalued) by four- to five-fold. After standardizing the variations in the complexity of different procedures, the hourly reimbursement rate in 1978 ranged from $40 for a general practitioner to $200 for surgical specialists. PMID:10309112

Large space telescope engineering scale model optical design

NASA Technical Reports Server (NTRS)

Facey, T. A.

1973-01-01

The objective is to develop the detailed design and tolerance data for the LST engineering scale model optical system. This will enable MSFC to move forward to the optical element procurement phase and also to evaluate tolerances, manufacturing requirements, assembly/checkout procedures, reliability, operational complexity, stability requirements of the structure and thermal system, and the flexibility to change and grow.

An aquatic multiscale assessment and planning framework approach—forest plan revision case study

Treesearch

Kerry Overton; Ann D. Carlson; Cynthia Tait

2010-01-01

The Aquatic Multiscale Assessment and Planning Framework is a Web-based decision-support tool developed to assist aquatic practitioners in managing fisheries and watershed information. This tool, or framework, was designed to assist resource assessments and planning efforts from the broad scale to the fine scale, to document procedures, and to link directly to relevant...

Development and Validation of the Meaning of Work Inventory among French Workers

ERIC Educational Resources Information Center

Arnoux-Nicolas, Caroline; Sovet, Laurent; Lhotellier, Lin; Bernaud, Jean-Luc

2017-01-01

The purpose of this study was to validate a psychometric instrument among French workers for assessing the meaning of work. Following an empirical framework, a two-step procedure consisted of exploring and then validating the scale among distinctive samples. The consequent Meaning of Work Inventory is a 15-item scale based on a four-factor model,…

Scale development of safety management system evaluation for the airline industry.

PubMed

Chen, Ching-Fu; Chen, Shu-Chuan

2012-07-01

The airline industry relies on the implementation of Safety Management System (SMS) to integrate safety policies and augment safety performance at both organizational and individual levels. Although there are various degrees of SMS implementation in practice, a comprehensive scale measuring the essential dimensions of SMS is still lacking. This paper thus aims to develop an SMS measurement scale from the perspective of aviation experts and airline managers to evaluate the performance of company's safety management system, by adopting Schwab's (1980) three-stage scale development procedure. The results reveal a five-factor structure consisting of 23 items. The five factors include documentation and commands, safety promotion and training, executive management commitment, emergency preparedness and response plan and safety management policy. The implications of this SMS evaluation scale for practitioners and future research are discussed. Copyright © 2012 Elsevier Ltd. All rights reserved.

Static Aeroelastic Scaling and Analysis of a Sub-Scale Flexible Wing Wind Tunnel Model

NASA Technical Reports Server (NTRS)

Ting, Eric; Lebofsky, Sonia; Nguyen, Nhan; Trinh, Khanh

2014-01-01

This paper presents an approach to the development of a scaled wind tunnel model for static aeroelastic similarity with a full-scale wing model. The full-scale aircraft model is based on the NASA Generic Transport Model (GTM) with flexible wing structures referred to as the Elastically Shaped Aircraft Concept (ESAC). The baseline stiffness of the ESAC wing represents a conventionally stiff wing model. Static aeroelastic scaling is conducted on the stiff wing configuration to develop the wind tunnel model, but additional tailoring is also conducted such that the wind tunnel model achieves a 10% wing tip deflection at the wind tunnel test condition. An aeroelastic scaling procedure and analysis is conducted, and a sub-scale flexible wind tunnel model based on the full-scale's undeformed jig-shape is developed. Optimization of the flexible wind tunnel model's undeflected twist along the span, or pre-twist or wash-out, is then conducted for the design test condition. The resulting wind tunnel model is an aeroelastic model designed for the wind tunnel test condition.

[Development of the theoretical framework and the item pool of the peri-operative recovery scale for integrative medicine].

PubMed

Su, Bi-ying; Liu, Shao-nan; Li, Xiao-yan

2011-11-01

To study the train of thoughts and procedures for developing the theoretical framework and the item pool of the peri-operative recovery scale for integrative medicine, thus making preparation for the development of this scale and psychometric testing. Under the guidance for Chinese medicine theories and the guidance for developing psychometric scale, the theoretical framework and the item pool of the scale were initially laid out by literature retrieval, and expert consultation, etc. The scale covered the domains of physical function, mental function, activity function, pain, and general assessment. Besides, social function is involved, which is suitable for pre-operative testing and long-term therapeutic efficacy testing after discharge from hospital. Each domain should cover correlated Zang-Fu organs, qi, blood, and the patient-reported outcomes. Totally 122 items were initially covered in the item pool according to theoretical framework of the scale. The peri-operative recovery scale of integrative medicine was the embodiment of the combination of Chinese medicine theories and patient-reported outcome concepts. The scale could reasonably assess the peri-operative recovery outcomes of patients treated by integrative medicine.

Recent developments in large-scale structural optimization

NASA Technical Reports Server (NTRS)

Venkayya, Vipperla B.

1989-01-01

A brief discussion is given of mathematical optimization and the motivation for the development of more recent numerical search procedures. A review of recent developments and issues in multidisciplinary optimization is also presented. These developments are discussed in the context of the preliminary design of aircraft structures. A capability description of programs FASTOP, TSO, STARS, LAGRANGE, ELFINI and ASTROS is included.

Designing an Energy Literacy Questionnaire for Middle and High School Youth

ERIC Educational Resources Information Center

DeWaters, Jan; Qaqish, Basil; Graham, Mary; Powers, Susan

2013-01-01

A measurement scale has been developed to assess secondary students' energy literacy--a citizenship understanding of energy that includes cognitive as well as affective and behavioral items. Instrument development procedures followed psychometric principles from educational and social psychology research. Initial exploration of the measure yielded…

Standardized Evaluation for Multi-National Development Programs.

ERIC Educational Resources Information Center

Farrell, W. Timothy

This paper takes the position that standardized evaluation formats and procedures for multi-national development programs are not only desirable but possible in diverse settings. The key is the localization of standard systems, which involves not only the technical manipulation of items and scales, but also the contextual interpretation of…

The Development of Technology for Higher Education Institution's Administrative Personnel Assessment

ERIC Educational Resources Information Center

Bakhtina, Olga Yurevna; Kirillov, Andrey Vladimirovich; Matyash, Sergey Askoldovich; Urzha, Olga Aleksandrovna

2015-01-01

The main approaches for development of assessment technology of higher education institution's administrative personnel are considered in this article. Alongside with it the following is defined: purposes, formation principles, indicators and criteria of the assessment system, rating scale, the procedure and order of assessment process of higher…

Scaling the Library Collection; A Simplified Method for Weighing the Variables

ERIC Educational Resources Information Center

Vagianos, Louis

1973-01-01

On the assumption that the physical properties of any information stock (book, etc.) offer the best foundation on which to develop satisfactory measurements for assessing library operations and developing library procedures, weight is suggested as the most useful variable for assessment and standardization. Advantages of this approach are…

15 CFR 970.514 - Scale requiring application procedures.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Scale requiring application procedures. 970.514 Section 970.514 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade... § 970.514 Scale requiring application procedures. (a) A proposal by the Administrator to modify a term...

Development of a Scale for Measuring Parental Satisfaction with Services Available for Disabled Children in Jordan

ERIC Educational Resources Information Center

Hyassat, Mizyed A.; Akhayat, Majed M.; Alzyoud, Nwaf

2015-01-01

Undoubtedly, parents of children with disabilities are better knowing than anyone else about their children's development and progress. Therefore, considering their perspectives on the services may lead to enhancing service delivery to their disabled children. In this paper, we described the procedure of developing an instrument for measuring…

Integrating Mobile Phones into Science Teaching to Help Students Develop a Procedure to Evaluate the Corrosion Rate of Iron in Simulated Seawater

ERIC Educational Resources Information Center

Moraes, Edgar P.; Confessor, Mario R.; Gasparotto, Luiz H. S.

2015-01-01

This article proposes an indirect method to evaluate the corrosion rate of iron nail in simulated seawater. The official procedure is based on the direct measurement of the specimen's weight loss over time; however, a highly precise scale is required and such equipment may not be easily available. On the other hand, mobile phones equipped with…

The development of methods for predicting and measuring distribution patterns of aerial sprays

NASA Technical Reports Server (NTRS)

Ormsbee, A. I.; Bragg, M. B.; Maughmer, M. D.

1979-01-01

The capability of conducting scale model experiments which involve the ejection of small particles into the wake of an aircraft close to the ground is developed. A set of relationships used to scale small-sized dispersion studies to full-size results are experimentally verified and, with some qualifications, basic deposition patterns are presented. In the process of validating these scaling laws, the basic experimental techniques used in conducting such studies, both with and without an operational propeller, were developed. The procedures that evolved are outlined. The envelope of test conditions that can be accommodated in the Langley Vortex Research Facility, which were developed theoretically, are verified using a series of vortex trajectory experiments that help to define the limitations due to wall interference effects for models of different sizes.

A framework for the evaluation of new interventional procedures.

PubMed

Lourenco, Tania; Grant, Adrian M; Burr, Jennifer M; Vale, Luke

2012-03-01

The introduction of new interventional procedures is less regulated than for other health technologies such as pharmaceuticals. Decisions are often taken on evidence of efficacy and short-term safety from small-scale usually observational studies. This reflects the particular challenges of evaluating interventional procedures - the extra facets of skill and training and the difficulty defining a 'new' technology. Currently, there is no framework to evaluate new interventional procedures before they become available in clinical practice as opposed to new pharmaceuticals. This paper proposes a framework to guide the evaluation of a new interventional procedure. A framework was developed consisting of a four-stage progressive evaluation for a new interventional procedure: Stage 1: Development; Stage 2: Efficacy and short-term safety; Stage 3: Effectiveness and cost-effectiveness; and Stage 4: Implementation. The framework also suggests the types of studies or data collection methods that can be used to satisfy each stage. This paper makes a first step on a framework for generating evidence on new interventional procedures. The difficulties and limitations of applying such a framework are discussed. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Examination of factor structure for the consumers' responses to the Value Consciousness Scale.

PubMed

Conrad, C A; Williams, J R

2000-12-01

The psychometric properties of the Value Consciousness Scale developed by Lichtenstein, Netemeyer, and Burton in 1990 were examined in a retail grocery study (N = 497). Original assessment of scale properties was undertaken using two convenience samples in a nonretail setting and additional scale performance has been documented by the scale authors. This study furthers previous research by (1) examining performance on the items in the retail grocery setting and (2) utilizing an appropriately rigorous sampling procedure. A confirmatory factor analysis indicated that the Value Consciousness Scale does not exhibit unidimensional properties, and one must be cautious if this scale is used in applications of market segmentation until further clarification can be provided.

Optimal Roux-en-Y reconstruction after distal gastrectomy for early gastric cancer as assessed using the newly developed PGSAS-45 scale.

PubMed

Kawahira, Hiroshi; Kodera, Yasuhiro; Hiki, Naoki; Takahashi, Masazumi; Itoh, Seiji; Mitsumori, Norio; Kawashima, Yoshiyuki; Namikawa, Tsutomu; Inada, Takao; Nakada, Koji

2015-10-01

The optimal surgical procedure for distal gastrectomy with Roux-en-Y reconstruction (DGRY) remains to be determined. Recently, a self-report assessment instrument, the Postgastrectomy Syndrome Assessment Scale-45 (PGSAS-45), was compiled to evaluate symptoms, the living status and the quality of life of patients who have undergone gastrectomy. We used this scale to evaluate procedures used for DGRY. The subjects included 475 patients who underwent DGRY for stage IA/IB gastric cancer. We evaluated whether the size of the remnant stomach, length of the Roux limb, reconstruction route and anastomotic procedure affected the patients' symptoms, living status and quality of life assessed using the PGSAS-45. Patients with a residual stomach of more than half had significantly worse esophageal reflux scores than the patients with a smaller residual stomach (P = 0.0462); a residual stomach of one-third or one-fourth was favorable. A shorter length of the Roux limb was shown to be preferable to a longer Roux limb based on the results of the PGSAS-45. In addition, antecolic reconstruction and the anastomotic procedure using a linear stapler were found to be more favorable. The size of the remnant stomach and the length and route of the Roux limb significantly influence the patient-reported DGRY outcomes.

Simulating the impacts of disturbances on forest carbon cycling in North America: Processes, data, models, and challenges

USGS Publications Warehouse

Liu, Shuguang; Bond-Lamberty, Ben; Hicke, Jeffrey A.; Vargas, Rodrigo; Zhao, Shuqing; Chen, Jing; Edburg, Steven L.; Hu, Yueming; Liu, Jinxun; McGuire, A. David; Xiao, Jingfeng; Keane, Robert; Yuan, Wenping; Tang, Jianwu; Luo, Yiqi; Potter, Christopher; Oeding, Jennifer

2011-01-01

Forest disturbances greatly alter the carbon cycle at various spatial and temporal scales. It is critical to understand disturbance regimes and their impacts to better quantify regional and global carbon dynamics. This review of the status and major challenges in representing the impacts of disturbances in modeling the carbon dynamics across North America revealed some major advances and challenges. First, significant advances have been made in representation, scaling, and characterization of disturbances that should be included in regional modeling efforts. Second, there is a need to develop effective and comprehensive process‐based procedures and algorithms to quantify the immediate and long‐term impacts of disturbances on ecosystem succession, soils, microclimate, and cycles of carbon, water, and nutrients. Third, our capability to simulate the occurrences and severity of disturbances is very limited. Fourth, scaling issues have rarely been addressed in continental scale model applications. It is not fully understood which finer scale processes and properties need to be scaled to coarser spatial and temporal scales. Fifth, there are inadequate databases on disturbances at the continental scale to support the quantification of their effects on the carbon balance in North America. Finally, procedures are needed to quantify the uncertainty of model inputs, model parameters, and model structures, and thus to estimate their impacts on overall model uncertainty. Working together, the scientific community interested in disturbance and its impacts can identify the most uncertain issues surrounding the role of disturbance in the North American carbon budget and develop working hypotheses to reduce the uncertainty

Parallel Domain Decomposition Formulation and Software for Large-Scale Sparse Symmetrical/Unsymmetrical Aeroacoustic Applications

NASA Technical Reports Server (NTRS)

Nguyen, D. T.; Watson, Willie R. (Technical Monitor)

2005-01-01

The overall objectives of this research work are to formulate and validate efficient parallel algorithms, and to efficiently design/implement computer software for solving large-scale acoustic problems, arised from the unified frameworks of the finite element procedures. The adopted parallel Finite Element (FE) Domain Decomposition (DD) procedures should fully take advantages of multiple processing capabilities offered by most modern high performance computing platforms for efficient parallel computation. To achieve this objective. the formulation needs to integrate efficient sparse (and dense) assembly techniques, hybrid (or mixed) direct and iterative equation solvers, proper pre-conditioned strategies, unrolling strategies, and effective processors' communicating schemes. Finally, the numerical performance of the developed parallel finite element procedures will be evaluated by solving series of structural, and acoustic (symmetrical and un-symmetrical) problems (in different computing platforms). Comparisons with existing "commercialized" and/or "public domain" software are also included, whenever possible.

Segmented Domain Decomposition Multigrid For 3-D Turbomachinery Flows

NASA Technical Reports Server (NTRS)

Celestina, M. L.; Adamczyk, J. J.; Rubin, S. G.

2001-01-01

A Segmented Domain Decomposition Multigrid (SDDMG) procedure was developed for three-dimensional viscous flow problems as they apply to turbomachinery flows. The procedure divides the computational domain into a coarse mesh comprised of uniformly spaced cells. To resolve smaller length scales such as the viscous layer near a surface, segments of the coarse mesh are subdivided into a finer mesh. This is repeated until adequate resolution of the smallest relevant length scale is obtained. Multigrid is used to communicate information between the different grid levels. To test the procedure, simulation results will be presented for a compressor and turbine cascade. These simulations are intended to show the ability of the present method to generate grid independent solutions. Comparisons with data will also be presented. These comparisons will further demonstrate the usefulness of the present work for they allow an estimate of the accuracy of the flow modeling equations independent of error attributed to numerical discretization.

Renormalization Group scale-setting in astrophysical systems

NASA Astrophysics Data System (ADS)

Domazet, Silvije; Štefančić, Hrvoje

2011-09-01

A more general scale-setting procedure for General Relativity with Renormalization Group corrections is proposed. Theoretical aspects of the scale-setting procedure and the interpretation of the Renormalization Group running scale are discussed. The procedure is elaborated for several highly symmetric systems with matter in the form of an ideal fluid and for two models of running of the Newton coupling and the cosmological term. For a static spherically symmetric system with the matter obeying the polytropic equation of state the running scale-setting is performed analytically. The obtained result for the running scale matches the Ansatz introduced in a recent paper by Rodrigues, Letelier and Shapiro which provides an excellent explanation of rotation curves for a number of galaxies. A systematic explanation of the galaxy rotation curves using the scale-setting procedure introduced in this Letter is identified as an important future goal.

Goal Attainment Scaling Manual, RUL #5. Materials Development Center Reprint 18.

ERIC Educational Resources Information Center

White, Buffy; And Others

This manual consists of three parts: (1) an introduction to Goal Attainment Scaling (GAS) as an evaluation tool in rehabilitation, (2) a workbook, and (3) a report of a pilot study of GAS. Chapter 1 discusses GAS as an evaluation procedure and defines it as a way of arranging and expressing time-based treatment cr service goals so that results can…

Combustion Characterization and Model Fuel Development for Micro-tubular Flame-assisted Fuel Cells.

PubMed

Milcarek, Ryan J; Garrett, Michael J; Baskaran, Amrish; Ahn, Jeongmin

2016-10-02

Combustion based power generation has been accomplished for many years through a number of heat engine systems. Recently, a move towards small scale power generation and micro combustion as well as development in fuel cell research has created new means of power generation that combine solid oxide fuel cells with open flames and combustion exhaust. Instead of relying upon the heat of combustion, these solid oxide fuel cell systems rely on reforming of the fuel via combustion to generate syngas for electrochemical power generation. Procedures were developed to assess the combustion by-products under a wide range of conditions. While theoretical and computational procedures have been developed for assessing fuel-rich combustion exhaust in these applications, experimental techniques have also emerged. The experimental procedures often rely upon a gas chromatograph or mass spectrometer analysis of the flame and exhaust to assess the combustion process as a fuel reformer and means of heat generation. The experimental techniques developed in these areas have been applied anew for the development of the micro-tubular flame-assisted fuel cell. The protocol discussed in this work builds on past techniques to specify a procedure for characterizing fuel-rich combustion exhaust and developing a model fuel-rich combustion exhaust for use in flame-assisted fuel cell testing. The development of the procedure and its applications and limitations are discussed.

Multivariate Analysis of the Visual Information Processing of Numbers

ERIC Educational Resources Information Center

Levine, David M.

1977-01-01

Nonmetric multidimensional scaling and hierarchical clustering procedures are applied to a confusion matrix of numerals. Two dimensions were interpreted: straight versus curved, and locus of curvature. Four major clusters of numerals were developed. (Author/JKS)

Development of coring procedures applied to Si, CdTe, and CIGS solar panels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moutinho, H. R.; Johnston, S.; To, B.

Most of the research on the performance and degradation of photovoltaic modules is based on macroscale measurements of device parameters such as efficiency, fill factor, open-circuit voltage, and short-circuit current. Our goal is to develop the capabilities to allow us to study the degradation of these parameters in the micro- and nanometer scale and to relate our results to performance parameters. To achieve this objective, the first step is to be able to access small samples from specific areas of the solar panels without changing the properties of the material. In this paper, we describe two coring procedures that wemore » developed and applied to Si, CIGS, and CdTe solar panels. In the first procedure, we cored full samples, whereas in the second we performed a partial coring that keeps the tempered glass intact. The cored samples were analyzed by different analytical techniques before and after coring, at the same locations, and no damage during the coring procedure was observed.« less

Development of coring procedures applied to Si, CdTe, and CIGS solar panels

DOE PAGES

Moutinho, H. R.; Johnston, S.; To, B.; ...

2018-01-04

Most of the research on the performance and degradation of photovoltaic modules is based on macroscale measurements of device parameters such as efficiency, fill factor, open-circuit voltage, and short-circuit current. Our goal is to develop the capabilities to allow us to study the degradation of these parameters in the micro- and nanometer scale and to relate our results to performance parameters. To achieve this objective, the first step is to be able to access small samples from specific areas of the solar panels without changing the properties of the material. In this paper, we describe two coring procedures that wemore » developed and applied to Si, CIGS, and CdTe solar panels. In the first procedure, we cored full samples, whereas in the second we performed a partial coring that keeps the tempered glass intact. The cored samples were analyzed by different analytical techniques before and after coring, at the same locations, and no damage during the coring procedure was observed.« less

An analysis of ratings: A guide to RMRATE

Treesearch

Thomas C. Brown; Terry C. Daniel; Herbert W. Schroeder; Glen E. Brink

1990-01-01

This report describes RMRATE, a computer program for analyzing rating judgments. RMRATE scales ratings using several scaling procedures, and compares the resulting scale values. The scaling procedures include the median and simple mean, standardized values, scale values based on Thurstone's Law of Categorical Judgment, and regression-based values. RMRATE also...

Subgrid-scale scalar flux modelling based on optimal estimation theory and machine-learning procedures

NASA Astrophysics Data System (ADS)

Vollant, A.; Balarac, G.; Corre, C.

2017-09-01

New procedures are explored for the development of models in the context of large eddy simulation (LES) of a passive scalar. They rely on the combination of the optimal estimator theory with machine-learning algorithms. The concept of optimal estimator allows to identify the most accurate set of parameters to be used when deriving a model. The model itself can then be defined by training an artificial neural network (ANN) on a database derived from the filtering of direct numerical simulation (DNS) results. This procedure leads to a subgrid scale model displaying good structural performance, which allows to perform LESs very close to the filtered DNS results. However, this first procedure does not control the functional performance so that the model can fail when the flow configuration differs from the training database. Another procedure is then proposed, where the model functional form is imposed and the ANN used only to define the model coefficients. The training step is a bi-objective optimisation in order to control both structural and functional performances. The model derived from this second procedure proves to be more robust. It also provides stable LESs for a turbulent plane jet flow configuration very far from the training database but over-estimates the mixing process in that case.

Climate, orography and scale controls on flood frequency in Triveneto (Italy)

NASA Astrophysics Data System (ADS)

Persiano, Simone; Castellarin, Attilio; Salinas, Jose Luis; Domeneghetti, Alessio; Brath, Armando

2016-05-01

The growing concern about the possible effects of climate change on flood frequency regime is leading Authorities to review previously proposed reference procedures for design-flood estimation, such as national flood frequency models. Our study focuses on Triveneto, a broad geographical region in North-eastern Italy. A reference procedure for design flood estimation in Triveneto is available from the Italian NCR research project "VA.PI.", which considered Triveneto as a single homogeneous region and developed a regional model using annual maximum series (AMS) of peak discharges that were collected up to the 1980s by the former Italian Hydrometeorological Service. We consider a very detailed AMS database that we recently compiled for 76 catchments located in Triveneto. All 76 study catchments are characterized in terms of several geomorphologic and climatic descriptors. The objective of our study is threefold: (1) to inspect climatic and scale controls on flood frequency regime; (2) to verify the possible presence of changes in flood frequency regime by looking at changes in time of regional L-moments of annual maximum floods; (3) to develop an updated reference procedure for design flood estimation in Triveneto by using a focused-pooling approach (i.e. Region of Influence, RoI). Our study leads to the following conclusions: (1) climatic and scale controls on flood frequency regime in Triveneto are similar to the controls that were recently found in Europe; (2) a single year characterized by extreme floods can have a remarkable influence on regional flood frequency models and analyses for detecting possible changes in flood frequency regime; (3) no significant change was detected in the flood frequency regime, yet an update of the existing reference procedure for design flood estimation is highly recommended and we propose the RoI approach for properly representing climate and scale controls on flood frequency in Triveneto, which cannot be regarded as a single homogeneous region.

The MMPI-2-RF Personality Psychopathology Five (PSY-5-RF) scales: development and validity research.

PubMed

Harkness, Allan R; McNulty, John L; Finn, Jacob A; Reynolds, Shannon M; Shields, Susan M; Arbisi, Paul

2014-01-01

This article describes the development, internal psychometric, and external validation studies on scales designed to measure the Personality Psychopathology Five (PSY-5) from MMPI-2 Restructured Form (MMPI-2-RF) items. Diverse and comprehensive data sets, representing various clinical and nonclinical populations, were classified into development and validation research samples. Item selection, retention, and exclusion procedures are detailed. The final set of PSY-5-RF scales contain 104 items, with no item overlap between scales (same as the original MMPI-2 PSY-5 scales), and no item overlap with the Demoralization scale. Internal consistency estimates are comparable to the longer MMPI-2 PSY-5 scales. Appropriate convergent and discriminant validity findings utilizing various self-report, collateral rating, and record review data are reported and discussed. A particular emphasis is offered for the unique aspects of the PSY-5 model: psychoticism and disconstraint. The findings are connected to the broader PSY-5 literature and the recommended review of systems (Harkness, Reynolds, & Lilienfeld, this issue) presented in this series of articles.

Statistical Ensemble of Large Eddy Simulations

NASA Technical Reports Server (NTRS)

Carati, Daniele; Rogers, Michael M.; Wray, Alan A.; Mansour, Nagi N. (Technical Monitor)

2001-01-01

A statistical ensemble of large eddy simulations (LES) is run simultaneously for the same flow. The information provided by the different large scale velocity fields is used to propose an ensemble averaged version of the dynamic model. This produces local model parameters that only depend on the statistical properties of the flow. An important property of the ensemble averaged dynamic procedure is that it does not require any spatial averaging and can thus be used in fully inhomogeneous flows. Also, the ensemble of LES's provides statistics of the large scale velocity that can be used for building new models for the subgrid-scale stress tensor. The ensemble averaged dynamic procedure has been implemented with various models for three flows: decaying isotropic turbulence, forced isotropic turbulence, and the time developing plane wake. It is found that the results are almost independent of the number of LES's in the statistical ensemble provided that the ensemble contains at least 16 realizations.

Development and validation of the irritable bowel syndrome scale under the system of quality of life instruments for chronic diseases QLICD-IBS: combinations of classical test theory and generalizability theory.

PubMed

Lei, Pingguang; Lei, Guanghe; Tian, Jianjun; Zhou, Zengfen; Zhao, Miao; Wan, Chonghua

2014-10-01

This paper is aimed to develop the irritable bowel syndrome (IBS) scale of the system of Quality of Life Instruments for Chronic Diseases (QLICD-IBS) by the modular approach and validate it by both classical test theory and generalizability theory. The QLICD-IBS was developed based on programmed decision procedures with multiple nominal and focus group discussions, in-depth interview, and quantitative statistical procedures. One hundred twelve inpatients with IBS were used to provide the data measuring QOL three times before and after treatments. The psychometric properties of the scale were evaluated with respect to validity, reliability, and responsiveness employing correlation analysis, factor analyses, multi-trait scaling analysis, t tests and also G studies and D studies of generalizability theory analysis. Multi-trait scaling analysis, correlation, and factor analyses confirmed good construct validity and criterion-related validity when using SF-36 as a criterion. Test-retest reliability coefficients (Pearson r and intra-class correlation (ICC)) for the overall score and all domains were higher than 0.80; the internal consistency α for all domains at two measurements were higher than 0.70 except for the social domain (0.55 and 0.67, respectively). The overall score and scores for all domains/facets had statistically significant changes after treatments with moderate or higher effect size standardized response mean (SRM) ranging from 0.72 to 1.02 at domain levels. G coefficients and index of dependability (Ф coefficients) confirmed the reliability of the scale further with more exact variance components. The QLICD-IBS has good validity, reliability, responsiveness, and some highlights and can be used as the quality of life instrument for patients with IBS.

Clinical-scale validation of a new efficient procedure for cryopreservation of ex vivo expanded cord blood hematopoietic stem and progenitor cells.

PubMed

Duchez, Pascale; Rodriguez, Laura; Chevaleyre, Jean; De La Grange, Philippe Brunet; Ivanovic, Zoran

2016-12-01

Survival of ex vivo expanded hematopoietic stem cells (HSC) and progenitor cells is low with the standard cryopreservation procedure. We recently showed that the efficiency of cryopreservation of these cells may be greatly enhanced by adding a serum-free xeno-free culture medium (HP01 Macopharma), which improves the antioxidant and biochemical properties of the cryopreservation solution. Here we present the clinical-scale validation of this cryopreservation procedure. The hematopoietic cells expanded in clinical-scale cultures were cryopreserved applying the new HP01-based procedure. The viability, apoptosis rate and number of functional committed progenitors (methyl-cellulose colony forming cell test), short-term repopulating HSCs (primary recipient NSG mice) and long-term HSCs (secondary recipient NSG mice) were tested before and after thawing. The efficiency of clinical-scale procedure reproduced the efficiency of cryopreservation obtained earlier in miniature sample experiments. Furthermore, the full preservation of short- and long-term HSCs was obtained in clinical scale conditions. Because the results obtained in clinical-scale volume are comparable to our earlier results in miniature-scale cultures, the clinical-scale procedure should be considered validated. It allows cryopreservation of the whole ex vivo expanded culture content, conserving full short- and long-term HSC activity. Copyright © 2016 International Society for Cellular Therapy. Published by Elsevier Inc. All rights reserved.

Towards large-scale, human-based, mesoscopic neurotechnologies.

PubMed

Chang, Edward F

2015-04-08

Direct human brain recordings have transformed the scope of neuroscience in the past decade. Progress has relied upon currently available neurophysiological approaches in the context of patients undergoing neurosurgical procedures for medical treatment. While this setting has provided precious opportunities for scientific research, it also has presented significant constraints on the development of new neurotechnologies. A major challenge now is how to achieve high-resolution spatiotemporal neural recordings at a large scale. By narrowing the gap between current approaches, new directions tailored to the mesoscopic (intermediate) scale of resolution may overcome the barriers towards safe and reliable human-based neurotechnology development, with major implications for advancing both basic research and clinical translation. Copyright © 2015 Elsevier Inc. All rights reserved.

Are Delinquents Different? Predictive Patterns for Low, Mid and High Delinquency Levels in a General Youth Sample via the HEW Youth Development Model's Impact Scales.

ERIC Educational Resources Information Center

Truckenmiller, James L.

The Health, Education and Welfare (HEW) Office of Youth Development's National Strategy for Youth Development model was promoted as a community-based planning and procedural tool for enhancing positive youth development and reducing delinquency. To test the applicability of the model as a function of delinquency level, the program's Impact Scales…

Quality by design: scale-up of freeze-drying cycles in pharmaceutical industry.

PubMed

Pisano, Roberto; Fissore, Davide; Barresi, Antonello A; Rastelli, Massimo

2013-09-01

This paper shows the application of mathematical modeling to scale-up a cycle developed with lab-scale equipment on two different production units. The above method is based on a simplified model of the process parameterized with experimentally determined heat and mass transfer coefficients. In this study, the overall heat transfer coefficient between product and shelf was determined by using the gravimetric procedure, while the dried product resistance to vapor flow was determined through the pressure rise test technique. Once model parameters were determined, the freeze-drying cycle of a parenteral product was developed via dynamic design space for a lab-scale unit. Then, mathematical modeling was used to scale-up the above cycle in the production equipment. In this way, appropriate values were determined for processing conditions, which allow the replication, in the industrial unit, of the product dynamics observed in the small scale freeze-dryer. This study also showed how inter-vial variability, as well as model parameter uncertainty, can be taken into account during scale-up calculations.

Assessment of change in dynamic psychotherapy.

PubMed

Høglend, P; Bøgwald, K P; Amlo, S; Heyerdahl, O; Sørbye, O; Marble, A; Sjaastad, M C; Bentsen, H

2000-01-01

Five scales have been developed to assess changes that are consistent with the therapeutic rationales and procedures of dynamic psychotherapy. Seven raters evaluated 50 patients before and 36 patients again after brief dynamic psychotherapy. A factor analysis indicated that the scales represent a dimension that is discriminable from general symptoms. A summary measure, Dynamic Capacity, was rated with acceptable reliability by a single rater. However, average scores of three raters were needed for good reliability of change ratings. The scales seem to be sufficiently fine-grained to capture statistically and clinically significant changes during brief dynamic psychotherapy.

The Milwaukee Inventory for Styles of Trichotillomania-Child Version (MIST-C): Initial Development and Psychometric Properties

ERIC Educational Resources Information Center

Flessner, Christopher A.; Woods, Douglas W.; Franklin, Martin E.; Keuthen, Nancy J.; Piacentini, John; Cashin, Susan E.; Moore, Phoebe S.

2007-01-01

This article describes the development and initial psychometric properties of the Milwaukee Inventory for Styles of Trichotillomania-Child Version (MIST-C), a self-report scale designed to assess styles of hair pulling in children and adolescents diagnosed with trichotillomania (TTM). Using Internet sampling procedures, the authors recruited 164…

Hypertension Knowledge-Level Scale (HK-LS): a study on development, validity and reliability.

PubMed

Erkoc, Sultan Baliz; Isikli, Burhanettin; Metintas, Selma; Kalyoncu, Cemalettin

2012-03-01

This study was conducted to develop a scale to measure knowledge about hypertension among Turkish adults. The Hypertension Knowledge-Level Scale (HK-LS) was generated based on content, face, and construct validity, internal consistency, test re-test reliability, and discriminative validity procedures. The final scale had 22 items with six sub-dimensions. The scale was applied to 457 individuals aged ≥ 18 years, and 414 of them were re-evaluated for test-retest reliability. The six sub-dimensions encompassed 60.3% of the total variance. Cronbach alpha coefficients were 0.82 for the entire scale and 0.92, 0.59, 0.67, 0.77, 0.72, and 0.76 for the sub-dimensions of definition, medical treatment, drug compliance, lifestyle, diet, and complications, respectively. The scale ensured internal consistency in reliability and construct validity, as well as stability over time. Significant relationships were found between knowledge score and age, gender, educational level, and history of hypertension of the participants. No correlation was found between knowledge score and working at an income-generating job. The present scale, developed to measure the knowledge level of hypertension among Turkish adults, was found to be valid and reliable.

The SCALE Verified, Archived Library of Inputs and Data - VALID

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marshall, William BJ J; Rearden, Bradley T

The Verified, Archived Library of Inputs and Data (VALID) at ORNL contains high quality, independently reviewed models and results that improve confidence in analysis. VALID is developed and maintained according to a procedure of the SCALE quality assurance (QA) plan. This paper reviews the origins of the procedure and its intended purpose, the philosophy of the procedure, some highlights of its implementation, and the future of the procedure and associated VALID library. The original focus of the procedure was the generation of high-quality models that could be archived at ORNL and applied to many studies. The review process associated withmore » model generation minimized the chances of errors in these archived models. Subsequently, the scope of the library and procedure was expanded to provide high quality, reviewed sensitivity data files for deployment through the International Handbook of Evaluated Criticality Safety Benchmark Experiments (IHECSBE). Sensitivity data files for approximately 400 such models are currently available. The VALID procedure and library continue fulfilling these multiple roles. The VALID procedure is based on the quality assurance principles of ISO 9001 and nuclear safety analysis. Some of these key concepts include: independent generation and review of information, generation and review by qualified individuals, use of appropriate references for design data and documentation, and retrievability of the models, results, and documentation associated with entries in the library. Some highlights of the detailed procedure are discussed to provide background on its implementation and to indicate limitations of data extracted from VALID for use by the broader community. Specifically, external users of data generated within VALID must take responsibility for ensuring that the files are used within the QA framework of their organization and that use is appropriate. The future plans for the VALID library include expansion to include additional experiments from the IHECSBE, to include experiments from areas beyond criticality safety, such as reactor physics and shielding, and to include application models. In the future, external SCALE users may also obtain qualification under the VALID procedure and be involved in expanding the library. The VALID library provides a pathway for the criticality safety community to leverage modeling and analysis expertise at ORNL.« less

Specialty Training's Organizational Readiness for curriculum Change (STORC): development of a questionnaire in a Delphi study.

PubMed

Bank, Lindsay; Jippes, Mariëlle; van Luijk, Scheltus; den Rooyen, Corry; Scherpbier, Albert; Scheele, Fedde

2015-08-05

In postgraduate medical education (PGME), programs have been restructured according to competency-based frameworks. The scale and implications of these adjustments justify a comprehensive implementation plan. Organizational Readiness for Change (ORC) is seen as a critical precursor for a successful implementation of change initiatives. Though, ORC in health care settings is mostly assessed in small scale settings and in relation to new policies and practices rather than educational change. Therefore our aim with this work was to develop an instrument to asses Specialty Training's Organizational Readiness for curriculum Change (STORC). A Delphi procedure was conducted to examine the applicability of a preliminary questionnaire in PGME, which was based on existing instruments designed for business and health care organizations. The 41 panellists (19 trainees and 22 supervisors from 6 specialties) from four different countries who were confronted with an apparent curriculum change, or would be in the near future, were asked to rate the relevance of a 89-item web-based questionnaire with regard to changes in specialty training on a 5-point Likert scale. Furthermore, they were invited to make qualitative comments on the items. In two rounds the 89-item preliminary questionnaire was reduced to 44 items. Items were either removed, kept, adapted or added based on individual item scores and qualitative comments. In the absence of a gold standard, this Delphi procedure was considered complete when the overall questionnaire rating exceeded 4.0 (scale 0-5). The overall item score reached 4.1 in the second round, meeting our criteria for completion of this Delphi procedure. This Delphi study describes the initial validating step in the development of an instrument to asses Specialty Training's Organisational Readiness for curriculum Change (STORC). Since ORC is measured on various subscales and presented as such, its strength lies in analysing these subscales. The latter makes it possible for educational leaders to identify and anticipate on hurdles in the implementation process and subsequently optimize efforts for successful curriculum change.

Development and validation of the coronary heart disease scale under the system of quality of life instruments for chronic diseases QLICD-CHD: combinations of classical test theory and Generalizability Theory.

PubMed

Wan, Chonghua; Li, Hezhan; Fan, Xuejin; Yang, Ruixue; Pan, Jiahua; Chen, Wenru; Zhao, Rong

2014-06-04

Quality of life (QOL) for patients with coronary heart disease (CHD) is now concerned worldwide with the specific instruments being seldom and no one developed by the modular approach. This paper is aimed to develop the CHD scale of the system of Quality of Life Instruments for Chronic Diseases (QLICD-CHD) by the modular approach and validate it by both classical test theory and Generalizability Theory. The QLICD-CHD was developed based on programmed decision procedures with multiple nominal and focus group discussions, in-depth interview, pre-testing and quantitative statistical procedures. 146 inpatients with CHD were used to provide the data measuring QOL three times before and after treatments. The psychometric properties of the scale were evaluated with respect to validity, reliability and responsiveness employing correlation analysis, factor analyses, multi-trait scaling analysis, t-tests and also G studies and D studies of Genralizability Theory analysis. Multi-trait scaling analysis, correlation and factor analyses confirmed good construct validity and criterion-related validity when using SF-36 as a criterion. The internal consistency α and test-retest reliability coefficients (Pearson r and Intra-class correlations ICC) for the overall instrument and all domains were higher than 0.70 and 0.80 respectively; The overall and all domains except for social domain had statistically significant changes after treatments with moderate effect size SRM (standardized response mea) ranging from 0.32 to 0.67. G-coefficients and index of dependability (Ф coefficients) confirmed the reliability of the scale further with more exact variance components. The QLICD-CHD has good validity, reliability, and moderate responsiveness and some highlights, and can be used as the quality of life instrument for patients with CHD. However, in order to obtain better reliability, the numbers of items for social domain should be increased or the items' quality, not quantity, should be improved.

Collaborative simulations and experiments for a novel yield model of coal devolatilization in oxy-coal combustion conditions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Iavarone, Salvatore; Smith, Sean T.; Smith, Philip J.

Oxy-coal combustion is an emerging low-cost “clean coal” technology for emissions reduction and Carbon Capture and Sequestration (CCS). The use of Computational Fluid Dynamics (CFD) tools is crucial for the development of cost-effective oxy-fuel technologies and the minimization of environmental concerns at industrial scale. The coupling of detailed chemistry models and CFD simulations is still challenging, especially for large-scale plants, because of the high computational efforts required. The development of scale-bridging models is therefore necessary, to find a good compromise between computational efforts and the physical-chemical modeling precision. This paper presents a procedure for scale-bridging modeling of coal devolatilization, inmore » the presence of experimental error, that puts emphasis on the thermodynamic aspect of devolatilization, namely the final volatile yield of coal, rather than kinetics. The procedure consists of an engineering approach based on dataset consistency and Bayesian methodology including Gaussian-Process Regression (GPR). Experimental data from devolatilization tests carried out in an oxy-coal entrained flow reactor were considered and CFD simulations of the reactor were performed. Jointly evaluating experiments and simulations, a novel yield model was validated against the data via consistency analysis. In parallel, a Gaussian-Process Regression was performed, to improve the understanding of the uncertainty associated to the devolatilization, based on the experimental measurements. Potential model forms that could predict yield during devolatilization were obtained. The set of model forms obtained via GPR includes the yield model that was proven to be consistent with the data. Finally, the overall procedure has resulted in a novel yield model for coal devolatilization and in a valuable evaluation of uncertainty in the data, in the model form, and in the model parameters.« less

Collaborative simulations and experiments for a novel yield model of coal devolatilization in oxy-coal combustion conditions

DOE PAGES

Iavarone, Salvatore; Smith, Sean T.; Smith, Philip J.; ...

2017-06-03

Oxy-coal combustion is an emerging low-cost “clean coal” technology for emissions reduction and Carbon Capture and Sequestration (CCS). The use of Computational Fluid Dynamics (CFD) tools is crucial for the development of cost-effective oxy-fuel technologies and the minimization of environmental concerns at industrial scale. The coupling of detailed chemistry models and CFD simulations is still challenging, especially for large-scale plants, because of the high computational efforts required. The development of scale-bridging models is therefore necessary, to find a good compromise between computational efforts and the physical-chemical modeling precision. This paper presents a procedure for scale-bridging modeling of coal devolatilization, inmore » the presence of experimental error, that puts emphasis on the thermodynamic aspect of devolatilization, namely the final volatile yield of coal, rather than kinetics. The procedure consists of an engineering approach based on dataset consistency and Bayesian methodology including Gaussian-Process Regression (GPR). Experimental data from devolatilization tests carried out in an oxy-coal entrained flow reactor were considered and CFD simulations of the reactor were performed. Jointly evaluating experiments and simulations, a novel yield model was validated against the data via consistency analysis. In parallel, a Gaussian-Process Regression was performed, to improve the understanding of the uncertainty associated to the devolatilization, based on the experimental measurements. Potential model forms that could predict yield during devolatilization were obtained. The set of model forms obtained via GPR includes the yield model that was proven to be consistent with the data. Finally, the overall procedure has resulted in a novel yield model for coal devolatilization and in a valuable evaluation of uncertainty in the data, in the model form, and in the model parameters.« less

Vero cell technology for rapid development of inactivated whole virus vaccines for emerging viral diseases.

PubMed

Barrett, P Noel; Terpening, Sara J; Snow, Doris; Cobb, Ronald R; Kistner, Otfried

2017-09-01

Rapid development and production of vaccines against emerging diseases requires well established, validated, robust technologies to allow industrial scale production and accelerated licensure of products. Areas covered: A versatile Vero cell platform has been developed and utilized to deliver a wide range of candidate and licensed vaccines against emerging viral diseases. This platform builds on the 35 years' experience and safety record with inactivated whole virus vaccines such as polio vaccine. The current platform has been optimized to include a novel double inactivation procedure in order to ensure a highly robust inactivation procedure for novel emerging viruses. The utility of this platform in rapidly developing inactivated whole virus vaccines against pandemic (-like) influenza viruses and other emerging viruses such as West Nile, Chikungunya, Ross River and SARS is reviewed. The potential of the platform for development of vaccines against other emerging viruses such as Zika virus is described. Expert commentary: Use of this platform can substantially accelerate process development and facilitate licensure because of the substantial existing data set available for the cell matrix. However, programs to provide vaccines against emerging diseases must allow alternative clinical development paths to licensure, without the requirement to carry out large scale field efficacy studies.

Modal-pushover-based ground-motion scaling procedure

USGS Publications Warehouse

Kalkan, Erol; Chopra, Anil K.

2011-01-01

Earthquake engineering is increasingly using nonlinear response history analysis (RHA) to demonstrate the performance of structures. This rigorous method of analysis requires selection and scaling of ground motions appropriate to design hazard levels. This paper presents a modal-pushover-based scaling (MPS) procedure to scale ground motions for use in a nonlinear RHA of buildings. In the MPS method, the ground motions are scaled to match to a specified tolerance, a target value of the inelastic deformation of the first-mode inelastic single-degree-of-freedom (SDF) system whose properties are determined by the first-mode pushover analysis. Appropriate for first-mode dominated structures, this approach is extended for structures with significant contributions of higher modes by considering elastic deformation of second-mode SDF systems in selecting a subset of the scaled ground motions. Based on results presented for three actual buildings-4, 6, and 13-story-the accuracy and efficiency of the MPS procedure are established and its superiority over the ASCE/SEI 7-05 scaling procedure is demonstrated.

A comparative study on assessment procedures and metric properties of two scoring systems of the Coma Recovery Scale-Revised items: standard and modified scores.

PubMed

Sattin, Davide; Lovaglio, Piergiorgio; Brenna, Greta; Covelli, Venusia; Rossi Sebastiano, Davide; Duran, Dunja; Minati, Ludovico; Giovannetti, Ambra Mara; Rosazza, Cristina; Bersano, Anna; Nigri, Anna; Ferraro, Stefania; Leonardi, Matilde

2017-09-01

The study compared the metric characteristics (discriminant capacity and factorial structure) of two different methods for scoring the items of the Coma Recovery Scale-Revised and it analysed scale scores collected using the standard assessment procedure and a new proposed method. Cross sectional design/methodological study. Inpatient, neurological unit. A total of 153 patients with disorders of consciousness were consecutively enrolled between 2011 and 2013. All patients were assessed with the Coma Recovery Scale-Revised using standard (rater 1) and inverted (rater 2) procedures. Coma Recovery Scale-Revised score, number of cognitive and reflex behaviours and diagnosis. Regarding patient assessment, rater 1 using standard and rater 2 using inverted procedures obtained the same best scores for each subscale of the Coma Recovery Scale-Revised for all patients, so no clinical (and statistical) difference was found between the two procedures. In 11 patients (7.7%), rater 2 noted that some Coma Recovery Scale-Revised codified behavioural responses were not found during assessment, although higher response categories were present. A total of 51 (36%) patients presented the same Coma Recovery Scale-Revised scores of 7 or 8 using a standard score, whereas no overlap was found using the modified score. Unidimensionality was confirmed for both score systems. The Coma Recovery Scale Modified Score showed a higher discriminant capacity than the standard score and a monofactorial structure was also supported. The inverted assessment procedure could be a useful evaluation method for the assessment of patients with disorder of consciousness diagnosis.

Bimetallic Cobalt-Rhodium Nanoparticle-Catalyzed Reductive Amination of Aldehydes with Nitroarenes Under Atmospheric Hydrogen.

PubMed

Choi, Isaac; Chun, Supill; Chung, Young Keun

2017-12-01

A cobalt-rhodium heterobimetallic nanoparticle (Co 2 Rh 2 /C)-catalyzed tandem reductive amination of aldehydes with nitroaromatics to sec-amines has been developed. The tandem reaction proceeds without any additives under mild conditions (1 atm H 2 and 25 °C). This procedure can be scaled up to the gram scale, and the catalyst can be reused more than six times without loss of activity.

Needle aspiration of calcific deposits (NACD) for calcific tendinitis is safe and effective: Six months follow-up of clinical results and complications in a series of 431 patients.

PubMed

Oudelaar, Bart W; Schepers-Bok, Relinde; Ooms, Edwin M; Huis In 't Veld, Rianne; Vochteloo, Anne J H

2016-04-01

Although needle aspiration of calcific deposits (NACD) has proven to be an effective treatment for calcific tendinitis of the rotator cuff (CTRC) in patients who are resistant to conservative treatment, little is known about the effectiveness of NACD in terms of complete relief of symptoms and the effectiveness of repeated NACD procedures. Furthermore, analyses of complications of the procedure in large series are scarce. 431 consecutive patients with symptomatic CTRC treated by NACD were included in this retrospective cohort study. Short-term effects were assessed at two weeks post-treatment by using an 11-point numeric rating scale (NRS). The six months outcome was determined on a dichotomous symptom scale (symptom free or persistence of symptoms). NACD procedures performed within six months of a previous NACD procedure were considered repeated procedures. All complications that occurred within six months of the NACD procedure were registered. At two weeks post-treatment, a significant improvement of pain scores was noted (mean reduction of NRS: 4.4 points; p<0.001). 74% of patients had complete relief of symptoms at six months post-treatment. 143 (33.2%) patients required multiple treatments. These repeated procedures were equally effective as the primary procedure. Complications of the NACD procedure were seen in 31 (7.2%) patients: 21 patients (4.9%) developed a subacromial bursitis, seven patients (1.6%) a frozen shoulder and three patients (0.7%) developed a septic bursitis. Needle aspiration of calcific deposits (NACD) is an effective treatment for calcific tendinitis of the rotator cuff in the majority of patients. Approximately one third of the patients will require multiple treatments, which were equally effective as the primary procedure. Based on this, patients should not be withheld a second or even a third treatment in case of persistent symptoms. Furthermore, NACD has a low complication rate, the risk of infection should, however, always be accounted for. Retrospective study, level IV. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Minimum Sample Size Requirements for Mokken Scale Analysis

ERIC Educational Resources Information Center

Straat, J. Hendrik; van der Ark, L. Andries; Sijtsma, Klaas

2014-01-01

An automated item selection procedure in Mokken scale analysis partitions a set of items into one or more Mokken scales, if the data allow. Two algorithms are available that pursue the same goal of selecting Mokken scales of maximum length: Mokken's original automated item selection procedure (AISP) and a genetic algorithm (GA). Minimum…

The development, design and test of a 66 W/kg (30-W/lb) roll-up solar array

NASA Technical Reports Server (NTRS)

Hasbach, W. A.; Ross, R. G., Jr.

1972-01-01

A program to develop a 250 square foot roll-up solar array with a power-to-weight ratio exceeding 30 watts per pound is described. The system design and fabrication of a full scale engineering development model are discussed. The system and development test program results are presented. Special test equipment and test procedures are included, together with comparisons of experimental and analytical results.

Beyond student ratings: peer observation of classroom and clinical teaching.

PubMed

Berk, Ronald A; Naumann, Phyllis L; Appling, Susan E

2004-01-01

Peer observation of classroom and clinical teaching has received increased attention over the past decade in schools of nursing to augment student ratings of teaching effectiveness. One essential ingredient is the scale used to evaluate performance. A five-step systematic procedure for adapting, writing, and building any peer observation scale is described. The differences between the development of a classroom observation scale and an appraisal scale to observe clinical instructors are examined. Psychometric issues peculiar to observation scales are discussed in terms of content validity, eight types of response bias, and interobserver reliability. The applications of the scales in one school of nursing as part of the triangulation of methods with student ratings and the teaching portfolio are illustrated. Copies of the scales are also provided.

Application of remote sensing in regional scale estimates of vegetation carbon budgets: The Belfix project

NASA Technical Reports Server (NTRS)

Veroustraete, Frank; Patyn, Johan; Myneni, R. B.

1994-01-01

A concept for coupling the remote sensing derived fraction of the absorbed photosynthetic active radiation (FAPAR) with a functional ecosystem model was developed. The study was named the Belfix procedure. The quantification of changes in carbon dynamics at the ecosystem level is a key issue in studies of global climatic change effects at the vegetation atmosphere interface. An operational procedure, for the determination of carbon fluxes at the regional scale (Belgian territory), is presented. The approach allows for the determination of the sink function of vegetation for carbon (dioxide). The phyto- and litter mass, photosynthetic assimilation, autotroph and heterotroph carbon fluxes and net ecosystem exchange (NEE) of carbon, were evaluated. The results suggest that a single solution can be obtained for ecosystem rates and states, applying an iterative procedure, based on minimizing the change in maximal seasonal green phytomass in function of yearly FAPAR temporal profiles. Total phytomass values obtained are in close range with those obtained by ground sampling.

Clinical pathway across tertiary and community care after an interventional cardiology procedure.

PubMed

Doran, K; Sampson, B; Staus, R; Ahern, C; Schiro, D

1997-01-01

Many patients who receive medical interventional cardiology procedures at a tertiary hospital live outside the metropolitan area and may experience fragmentation in care, less emotional support by family members, inaccurate and delayed communication, and lack of educational follow-up on discharge from the hospital. A clinical pathway titled "Heart Health Care Patterns" was developed to link acute phase, recovery phase, rehabilitation phase, and enhancement/maintenance phase. The 12-month clinical pathway combines Gordon's Functional Health Patterns and the Omaha System developed by the Omaha Visiting Nurse Association. The rating scale for outcomes assesses the patient at different phases to provide objective data and information throughout the year.

A comprehensive study on urban true orthorectification

USGS Publications Warehouse

Zhou, G.; Chen, W.; Kelmelis, J.A.; Zhang, Dongxiao

2005-01-01

To provide some advanced technical bases (algorithms and procedures) and experience needed for national large-scale digital orthophoto generation and revision of the Standards for National Large-Scale City Digital Orthophoto in the National Digital Orthophoto Program (NDOP), this paper presents a comprehensive study on theories, algorithms, and methods of large-scale urban orthoimage generation. The procedures of orthorectification for digital terrain model (DTM)-based and digital building model (DBM)-based orthoimage generation and their mergence for true orthoimage generation are discussed in detail. A method of compensating for building occlusions using photogrammetric geometry is developed. The data structure needed to model urban buildings for accurately generating urban orthoimages is presented. Shadow detection and removal, the optimization of seamline for automatic mosaic, and the radiometric balance of neighbor images are discussed. Street visibility analysis, including the relationship between flight height, building height, street width, and relative location of the street to the imaging center, is analyzed for complete true orthoimage generation. The experimental results demonstrated that our method can effectively and correctly orthorectify the displacements caused by terrain and buildings in urban large-scale aerial images. ?? 2005 IEEE.

Development and content validation of performance assessments for endoscopic third ventriculostomy.

PubMed

Breimer, Gerben E; Haji, Faizal A; Hoving, Eelco W; Drake, James M

2015-08-01

This study aims to develop and establish the content validity of multiple expert rating instruments to assess performance in endoscopic third ventriculostomy (ETV), collectively called the Neuro-Endoscopic Ventriculostomy Assessment Tool (NEVAT). The important aspects of ETV were identified through a review of current literature, ETV videos, and discussion with neurosurgeons, fellows, and residents. Three assessment measures were subsequently developed: a procedure-specific checklist (CL), a CL of surgical errors, and a global rating scale (GRS). Neurosurgeons from various countries, all identified as experts in ETV, were then invited to participate in a modified Delphi survey to establish the content validity of these instruments. In each Delphi round, experts rated their agreement including each procedural step, error, and GRS item in the respective instruments on a 5-point Likert scale. Seventeen experts agreed to participate in the study and completed all Delphi rounds. After item generation, a total of 27 procedural CL items, 26 error CL items, and 9 GRS items were posed to Delphi panelists for rating. An additional 17 procedural CL items, 12 error CL items, and 1 GRS item were added by panelists. After three rounds, strong consensus (>80% agreement) was achieved on 35 procedural CL items, 29 error CL items, and 10 GRS items. Moderate consensus (50-80% agreement) was achieved on an additional 7 procedural CL items and 1 error CL item. The final procedural and error checklist contained 42 and 30 items, respectively (divided into setup, exposure, navigation, ventriculostomy, and closure). The final GRS contained 10 items. We have established the content validity of three ETV assessment measures by iterative consensus of an international expert panel. Each measure provides unique assessment information and thus can be used individually or in combination, depending on the characteristics of the learner and the purpose of the assessment. These instruments must now be evaluated in both the simulated and operative settings, to determine their construct validity and reliability. Ultimately, the measures contained in the NEVAT may prove suitable for formative assessment during ETV training and potentially as summative assessment measures during certification.

An anatomically sound surgical simulation model for myringotomy and tympanostomy tube insertion.

PubMed

Hong, Paul; Webb, Amanda N; Corsten, Gerard; Balderston, Janet; Haworth, Rebecca; Ritchie, Krista; Massoud, Emad

2014-03-01

Myringotomy and tympanostomy tube insertion (MT) is a common surgical procedure. Although surgical simulation has proven to be an effective training tool, an anatomically sound simulation model for MT is lacking. We developed such a model and assessed its impact on the operating room performance of senior medical students. Prospective randomized trial. A randomized single-blind controlled study of simulation training with the MT model versus no simulation training. Each participant was randomized to either the simulation model group or control group, after performing an initial MT procedure. Within two weeks of the first procedure, the students performed a second MT. All procedures were performed on real patients and rated with a Global Rating Scale by two attending otolaryngologists. Time to complete the MT was also recorded. Twenty-four senior medical students were enrolled. Control and intervention groups did not differ at baseline on their Global Rating Scale score or time to complete the MT procedure. Following simulation training, the study group received significantly higher scores (P=.005) and performed the MT procedure in significantly less time (P=.034). The control group did not improve their performance scores (P>.05) or the time to complete the procedure (P>.05). Our surgical simulation model shows promise for being a valuable teaching tool for MT for senior medical students. Such anatomically appropriate physical simulators may benefit teaching of junior trainees. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Hot-bench simulation of the active flexible wing wind-tunnel model

NASA Technical Reports Server (NTRS)

Buttrill, Carey S.; Houck, Jacob A.

1990-01-01

Two simulations, one batch and one real-time, of an aeroelastically-scaled wind-tunnel model were developed. The wind-tunnel model was a full-span, free-to-roll model of an advanced fighter concept. The batch simulation was used to generate and verify the real-time simulation and to test candidate control laws prior to implementation. The real-time simulation supported hot-bench testing of a digital controller, which was developed to actively control the elastic deformation of the wind-tunnel model. Time scaling was required for hot-bench testing. The wind-tunnel model, the mathematical models for the simulations, the techniques employed to reduce the hot-bench time-scale factors, and the verification procedures are described.

The development of fears of compassion scale Japanese version.

PubMed

Asano, Kenichi; Tsuchiya, Masao; Ishimura, Ikuo; Lin, Shuzhen; Matsumoto, Yuki; Miyata, Haruko; Kotera, Yasuhiro; Shimizu, Eiji; Gilbert, Paul

2017-01-01

Cultivation of compassion is a useful way to treat mental problems, but some individuals show resistance. Fears of compassion can be an obstacle for clinicians when providing psychotherapy, and for clients when engaging in interpersonal relationships. Despite its importance, a Japanese version of fears of compassion scales (for others, from others, and for self) has not yet been developed. This study developed a Japanese version of the Fears of Compassion Scales and tested its reliability and validity. This study used a cross-sectional design, and a self-report procedure for collecting data. A total of 485 students (121 males and 364 females) answered self-report questionnaires, including the draft Fears of Compassion Scales-Japanese version. There were distinctive factor structures for fear of compassion from others, and for self. The fear of compassion from others scale consisted of concern about compassion from others and avoidance of compassion from others. All scales had good internal consistency, test-retest reliability, face validity, and construct validity. Discrimination and difficulty were also calculated. These results indicate that the Fears of Compassion Scales-Japanese version is a well-constructed and useful measure to assess fears of compassion and the existence of cultural differences in fears of compassion.

A Methodology for Studying the Relationship between Comprehension and Second Language Development in a Comprehension-Based ESL Program.

ERIC Educational Resources Information Center

Paribakht, T. Sima; Wesche, Marjorie Bingham

A study investigated the role of comprehension of meaningful language input in young adults' second language learning, focusing on: (1) what kinds of measurement instruments and procedures can be used in tracking student gains in specific aspects of target language proficiency; (2) development of a reliable self-report scale capturing different…

The Standardized Letter of Recommendation: Implications for Selection. Research Report. ETS RR-07-38

ERIC Educational Resources Information Center

Liu, Ou Lydia; Minsky, Jennifer; Ling, Guangming; Kyllonen, Patrick

2007-01-01

In an effort to standardize academic application procedures, the Standardized Letter of Recommendation (SLR) was developed to capture important cognitive and noncognitive qualities of graduate school candidates. The SLR consists of seven scales ("knowledge," "analytical skills," "communication skills,"…

Fluid dynamic modelling of renal pelvic pressure during endoscopic stone removal

NASA Astrophysics Data System (ADS)

Oratis, Alexandros; Subasic, John; Bird, James; Eisner, Brian

2015-11-01

Endoscopic kidney stone removal procedures are known to increase internal pressure in the renal pelvis, the kidney's urinary collecting system. High renal pelvic pressure incites systemic absorption of irrigation fluid, which can increase the risk of postoperative fever and sepsis or the unwanted absorption of electrolytes. Urologists choose the appropriate surgical procedure based on patient history and kidney stone size. However, no study has been conducted to compare the pressure profiles of each procedure, nor is there a precise sense of how the renal pelvic pressure scales with various operational parameters. Here we develop physical models for the flow rates and renal pelvic pressure for various procedures. We show that the results of our models are consistent with existing urological data on each procedure and that the models can predict pressure profiles where data is unavailable.

Conceptual hierarchical modeling to describe wetland plant community organization

USGS Publications Warehouse

Little, A.M.; Guntenspergen, G.R.; Allen, T.F.H.

2010-01-01

Using multivariate analysis, we created a hierarchical modeling process that describes how differently-scaled environmental factors interact to affect wetland-scale plant community organization in a system of small, isolated wetlands on Mount Desert Island, Maine. We followed the procedure: 1) delineate wetland groups using cluster analysis, 2) identify differently scaled environmental gradients using non-metric multidimensional scaling, 3) order gradient hierarchical levels according to spatiotem-poral scale of fluctuation, and 4) assemble hierarchical model using group relationships with ordination axes and post-hoc tests of environmental differences. Using this process, we determined 1) large wetland size and poor surface water chemistry led to the development of shrub fen wetland vegetation, 2) Sphagnum and water chemistry differences affected fen vs. marsh / sedge meadows status within small wetlands, and 3) small-scale hydrologic differences explained transitions between forested vs. non-forested and marsh vs. sedge meadow vegetation. This hierarchical modeling process can help explain how upper level contextual processes constrain biotic community response to lower-level environmental changes. It creates models with more nuanced spatiotemporal complexity than classification and regression tree procedures. Using this process, wetland scientists will be able to generate more generalizable theories of plant community organization, and useful management models. ?? Society of Wetland Scientists 2009.

The Korean Spinal Neurosurgery Society ; Are We Reimbursed Properly for Spinal Neurosurgical Practices under the Korean Resource Based Relative Value Scale Service?

PubMed Central

Kwon, Woo-Keun; Kim, Joo Han; Moon, Hong Joo; Park, Youn-Kwan

2017-01-01

Objectives The Korean Resource Based Relative Value Scale (K-RBRVS) was introduced in 2001 as an alternative of the previous medical fee schedule. Unfortunately, most neurosurgeons are unfamiliar with the details of the K-RBRVS and how it affects the reimbursement rates for the surgical procedures we perform. We summarize the K-RBRVS in brief, and discuss on how the relative value (RV) of the spinal neurosurgical procedures have changed since the introduction in 2001. Methods We analyzed the change of spinal procedure RVs since 2001, and compared it with the change of values in the brain neurosurgical procedures. RVs of 88 neurospinal procedures on the list of K-RBRVS were analyzed, while 24 procedures added during annual revisions were excluded. Results During the past 15 years, RVs for spinal procedures have increased 62.8%, which is not so different with the cumulative increase of consumer prices during this time period or the increase rate of 92.3% for brain surgeries. When comparing the change of RVs in more complex procedures between spinal and brain neurosurgery, the increase rate was 125.3% and 133%, respectively. Conclusion More effort of the society of spinal surgeons seems to be needed to get adequate reimbursement, as there have been some discrimination compared to brain surgeons in the increase of RVs. And considering the relative underestimation of spinal neurosurgeons’ labor, more objective measures of neurospinal surgeons’ work and productivity should be developed for impartial reimbursement. PMID:28061492

Relational databases: a transparent framework for encouraging biology students to think informatically.

PubMed

Rice, Michael; Gladstone, William; Weir, Michael

2004-01-01

We discuss how relational databases constitute an ideal framework for representing and analyzing large-scale genomic data sets in biology. As a case study, we describe a Drosophila splice-site database that we recently developed at Wesleyan University for use in research and teaching. The database stores data about splice sites computed by a custom algorithm using Drosophila cDNA transcripts and genomic DNA and supports a set of procedures for analyzing splice-site sequence space. A generic Web interface permits the execution of the procedures with a variety of parameter settings and also supports custom structured query language queries. Moreover, new analytical procedures can be added by updating special metatables in the database without altering the Web interface. The database provides a powerful setting for students to develop informatic thinking skills.

Virtual reality for health care: a survey.

PubMed

Moline, J

1997-01-01

This report surveys the state of the art in applications of virtual environments and related technologies for health care. Applications of these technologies are being developed for health care in the following areas: surgical procedures (remote surgery or telepresence, augmented or enhanced surgery, and planning and simulation of procedures before surgery); medical therapy; preventive medicine and patient education; medical education and training; visualization of massive medical databases; skill enhancement and rehabilitation; and architectural design for health-care facilities. To date, such applications have improved the quality of health care, and in the future they will result in substantial cost savings. Tools that respond to the needs of present virtual environment systems are being refined or developed. However, additional large-scale research is necessary in the following areas: user studies, use of robots for telepresence procedures, enhanced system reality, and improved system functionality.

Relational Databases: A Transparent Framework for Encouraging Biology Students To Think Informatically

PubMed Central

2004-01-01

We discuss how relational databases constitute an ideal framework for representing and analyzing large-scale genomic data sets in biology. As a case study, we describe a Drosophila splice-site database that we recently developed at Wesleyan University for use in research and teaching. The database stores data about splice sites computed by a custom algorithm using Drosophila cDNA transcripts and genomic DNA and supports a set of procedures for analyzing splice-site sequence space. A generic Web interface permits the execution of the procedures with a variety of parameter settings and also supports custom structured query language queries. Moreover, new analytical procedures can be added by updating special metatables in the database without altering the Web interface. The database provides a powerful setting for students to develop informatic thinking skills. PMID:15592597

The development of positive psychology outcome measures and their uses in dementia research: A systematic review.

PubMed

Stoner, Charlotte R; Stansfeld, Jacki; Orrell, Martin; Spector, Aimee

2017-01-01

Positive psychology is gaining credence within dementia research but currently there is a lack of outcome measures within this area developed specifically for people with dementia. Authors have begun adopting positive psychology measures developed with other populations but there is no consensus around which are more appropriate or psychometrically robust. A systematic search identified measures used between 1998 and 2017 and an appraisal of the development procedure was undertaken using standardised criteria enabling the awarding of scores based on reporting of psychometric information. Twelve measures within the constructs of identity, hope, religiosity/spirituality, life valuation, self-efficacy, community and wellbeing were identified as being used within 17 dementia studies. Development procedures were variable and scores on development criterion reflected this variability. Of the measures included, the Herth Hope Index, Systems of Belief Inventory and Psychological Wellbeing Scale appeared to be the most robustly developed and appropriate for people with dementia.

Homogenization of Large-Scale Movement Models in Ecology

USGS Publications Warehouse

Garlick, M.J.; Powell, J.A.; Hooten, M.B.; McFarlane, L.R.

2011-01-01

A difficulty in using diffusion models to predict large scale animal population dispersal is that individuals move differently based on local information (as opposed to gradients) in differing habitat types. This can be accommodated by using ecological diffusion. However, real environments are often spatially complex, limiting application of a direct approach. Homogenization for partial differential equations has long been applied to Fickian diffusion (in which average individual movement is organized along gradients of habitat and population density). We derive a homogenization procedure for ecological diffusion and apply it to a simple model for chronic wasting disease in mule deer. Homogenization allows us to determine the impact of small scale (10-100 m) habitat variability on large scale (10-100 km) movement. The procedure generates asymptotic equations for solutions on the large scale with parameters defined by small-scale variation. The simplicity of this homogenization procedure is striking when compared to the multi-dimensional homogenization procedure for Fickian diffusion,and the method will be equally straightforward for more complex models. ?? 2010 Society for Mathematical Biology.

The development of methods for predicting and measuring distribution patterns of aerial sprays. [Langley Vortex Research Facility

NASA Technical Reports Server (NTRS)

Ormsbee, A. I.; Bragg, M. B.; Maughmer, M. D.

1981-01-01

A set of relationships used to scale small sized dispersion studies to full size results are experimentally verified and, with some qualifications, basic deposition patterns are presented. In the process of validating these scaling laws, the basic experimental techniques used in conducting such studies both with and without an operational propeller were developed. The procedures that evolved are outlined in some detail. The envelope of test conditions that can be accommodated in the Langley Vortex Research Facility, which were developed theoretically, are verified using a series of vortex trajectory experiments that help to define the limitations due to wall interference effects for models of different sizes.

A dynamic regularized gradient model of the subgrid-scale stress tensor for large-eddy simulation

NASA Astrophysics Data System (ADS)

Vollant, A.; Balarac, G.; Corre, C.

2016-02-01

Large-eddy simulation (LES) solves only the large scales part of turbulent flows by using a scales separation based on a filtering operation. The solution of the filtered Navier-Stokes equations requires then to model the subgrid-scale (SGS) stress tensor to take into account the effect of scales smaller than the filter size. In this work, a new model is proposed for the SGS stress model. The model formulation is based on a regularization procedure of the gradient model to correct its unstable behavior. The model is developed based on a priori tests to improve the accuracy of the modeling for both structural and functional performances, i.e., the model ability to locally approximate the SGS unknown term and to reproduce enough global SGS dissipation, respectively. LES is then performed for a posteriori validation. This work is an extension to the SGS stress tensor of the regularization procedure proposed by Balarac et al. ["A dynamic regularized gradient model of the subgrid-scale scalar flux for large eddy simulations," Phys. Fluids 25(7), 075107 (2013)] to model the SGS scalar flux. A set of dynamic regularized gradient (DRG) models is thus made available for both the momentum and the scalar equations. The second objective of this work is to compare this new set of DRG models with direct numerical simulations (DNS), filtered DNS in the case of classic flows simulated with a pseudo-spectral solver and with the standard set of models based on the dynamic Smagorinsky model. Various flow configurations are considered: decaying homogeneous isotropic turbulence, turbulent plane jet, and turbulent channel flows. These tests demonstrate the stable behavior provided by the regularization procedure, along with substantial improvement for velocity and scalar statistics predictions.

The learning effect of intraoperative video-enhanced surgical procedure training.

PubMed

van Det, M J; Meijerink, W J H J; Hoff, C; Middel, L J; Koopal, S A; Pierie, J P E N

2011-07-01

The transition from basic skills training in a skills lab to procedure training in the operating theater using the traditional master-apprentice model (MAM) lacks uniformity and efficiency. When the supervising surgeon performs parts of a procedure, training opportunities are lost. To minimize this intervention by the supervisor and maximize the actual operating time for the trainee, we created a new training method called INtraoperative Video-Enhanced Surgical Training (INVEST). Ten surgical residents were trained in laparoscopic cholecystectomy either by the MAM or with INVEST. Each trainee performed six cholecystectomies that were objectively evaluated on an Objective Structured Assessment of Technical Skills (OSATS) global rating scale. Absolute and relative improvements during the training curriculum were compared between the groups. A questionnaire evaluated the trainee's opinion on this new training method. Skill improvement on the OSATS global rating scale was significantly greater for the trainees in the INVEST curriculum compared to the MAM, with mean absolute improvement 32.6 versus 14.0 points and mean relative improvement 59.1 versus 34.6% (P=0.02). INVEST significantly enhances technical and procedural skill development during the early learning curve for laparoscopic cholecystectomy. Trainees were positive about the content and the idea of the curriculum.

Behavior analytic approaches to problem behavior in intellectual disabilities.

PubMed

Hagopian, Louis P; Gregory, Meagan K

2016-03-01

The purpose of the current review is to summarize recent behavior analytic research on problem behavior in individuals with intellectual disabilities. We have focused our review on studies published from 2013 to 2015, but also included earlier studies that were relevant. Behavior analytic research on problem behavior continues to focus on the use and refinement of functional behavioral assessment procedures and function-based interventions. During the review period, a number of studies reported on procedures aimed at making functional analysis procedures more time efficient. Behavioral interventions continue to evolve, and there were several larger scale clinical studies reporting on multiple individuals. There was increased attention on the part of behavioral researchers to develop statistical methods for analysis of within subject data and continued efforts to aggregate findings across studies through evaluative reviews and meta-analyses. Findings support continued utility of functional analysis for guiding individualized interventions and for classifying problem behavior. Modifications designed to make functional analysis more efficient relative to the standard method of functional analysis were reported; however, these require further validation. Larger scale studies on behavioral assessment and treatment procedures provided additional empirical support for effectiveness of these approaches and their sustainability outside controlled clinical settings.

Functional outcome after the Hoffer procedure.

PubMed

Murabit, Amera; Gnarra, Maria; O'Grady, Kathleen; Morhart, Michael; Olson, Jaret L

2013-06-01

Children with obstetrical brachial plexus injury often develop an internal rotation and adduction contracture about the shoulder as a secondary deformity, resulting in an inability to externally rotate and abduct the shoulder. The Hoffer procedure is evaluated for its potential benefit in improving shoulder abduction and external rotation and its impact on activities of daily living. This is a retrospective review of patients treated in brachial plexus injury clinic who underwent tendon transfer procedures about the shoulder. Preoperative and postoperative active movement and active range of motion were measured and recorded using the Mallet scale and the Active Movement Scale. Twenty patients were included in the study. Average age at time of surgery was 6.35 years. Thirteen patients had primary brachial plexus reconstructive surgery and four patients had concomitant wrist extension tendon transfer procedures. All patients had full passive range of motion preoperatively. The average follow-up period was 25.45 months. Average differences in pre-Hoffer and post-Hoffer Mallet scale scores are as follows: active abduction, 1.20; external rotation, 1.35; hand-to-neck, 1.25; hand-to-back, 0.75; hand-to-mouth, 0.65; and aggregate score, 5.20 (p<0.001 for all). Average differences in relevant pre-Hoffer and post-Hoffer Active Movement Scale scores are as follows: shoulder abduction, 2.10; shoulder external rotation, 4.25; and shoulder internal rotation, -0.80. All patients maintained full range of motion passively; thus, no functional loss was experienced. These results showed very high statistical significance (p<0.001 for all) and clinical significance. Younger patients (≤6 years) and those with better preoperative shoulder flexion and shoulder internal rotation yielded better postoperative results. The Hoffer procedure provides clinically and statistically significant improvement in external rotation and abduction while preserving functional internal rotation range in the child with obstetrical brachial plexus palsy and secondary shoulder deformity. Therapeutic, IV.

Assessment of Change in Dynamic Psychotherapy

PubMed Central

Høglend, Per; Bøgwald, Kjell-Petter; Amlo, Svein; Heyerdahl, Oscar; Sørbye, Øystein; Marble, Alice; Sjaastad, Mary Cosgrove; Bentsen, Håvard

2000-01-01

Five scales have been developed to assess changes that are consistent with the therapeutic rationales and procedures of dynamic psychotherapy. Seven raters evaluated 50 patients before and 36 patients again after brief dynamic psychotherapy. A factor analysis indicated that the scales represent a dimension that is discriminable from general symptoms. A summary measure, Dynamic Capacity, was rated with acceptable reliability by a single rater. However, average scores of three raters were needed for good reliability of change ratings. The scales seem to be sufficiently fine-grained to capture statistically and clinically significant changes during brief dynamic psychotherapy. PMID:11069131

A non-invasive technique for rapid extraction of DNA from fish scales.

PubMed

Kumar, Ravindra; Singh, Poonam Jayant; Nagpure, N S; Kushwaha, Basdeo; Srivastava, S K; Lakra, W S

2007-11-01

DNA markers are being increasingly used in studies related to population genetics and conservation biology of endangered species. DNA isolation for such studies requires a source of biological material that is easy to collect, non-bulky and reliable. Further, the sampling strategies based on non-invasive procedures are desirable, especially for the endangered fish species. In view of above, a rapid DNA extraction method from fish scales has been developed with the use of a modified lysis buffer that require about 2 hr duration. This methodology is non-invasive, less expensive and reproducible with high efficiency of DNA recovery. The DNA extracted by this technique, have been found suitable for performing restriction enzyme digestion and PCR amplification. Therefore, the present DNA extraction procedure can be used as an alternative technique in population genetic studies pertaining to endangered fish species. The technique was also found equally effective for DNA isolation from fresh, dried and ethanol preserved scales.

Network placement optimization for large-scale distributed system

NASA Astrophysics Data System (ADS)

Ren, Yu; Liu, Fangfang; Fu, Yunxia; Zhou, Zheng

2018-01-01

The network geometry strongly influences the performance of the distributed system, i.e., the coverage capability, measurement accuracy and overall cost. Therefore the network placement optimization represents an urgent issue in the distributed measurement, even in large-scale metrology. This paper presents an effective computer-assisted network placement optimization procedure for the large-scale distributed system and illustrates it with the example of the multi-tracker system. To get an optimal placement, the coverage capability and the coordinate uncertainty of the network are quantified. Then a placement optimization objective function is developed in terms of coverage capabilities, measurement accuracy and overall cost. And a novel grid-based encoding approach for Genetic algorithm is proposed. So the network placement is optimized by a global rough search and a local detailed search. Its obvious advantage is that there is no need for a specific initial placement. At last, a specific application illustrates this placement optimization procedure can simulate the measurement results of a specific network and design the optimal placement efficiently.

Geometry in flipbook multimedia, a role of technology to improve mathematics learning quality: the case in madiun, east java

NASA Astrophysics Data System (ADS)

Andini, S.; Fitriana, L.; Budiyono

2018-04-01

This research is aimed to describe the process and to get product development of learning material using flipbook. The learning material is developed in geometry, especially quadrilateral. This research belongs to Research and Development (R&D). The procedure includes the steps of Budiyono Model such as conducting preliminary research, planning and developing a theoretical and prototype product, and determining product quality (validity, practicality, and effectiveness). The average assessment result of the theoretical product by the experts gets 4,54, while validity result of prototype product by the experts is 4,62. Practicability is obtained by the implementation of flipbook prototype in each meeting of limited-scale try out based on learning observation, with the average score of 4,10 and increasing of 4,50 in wide-scale try out. The effectiveness of the prototype product is obtained by the result from pretest and posttest on a limited-scale and a wide-scale try out. The limited-scale pre-test result showed a significant increase in average score of wide-scale pre-test of 25,2, and there is an increase in the average score of posttest on limited-scale try out and wide-scale try out is 8,16. The result of product quality can be concluded that flipbook media can be used in the geometry learning in elementary school which implemented curriculum 2013.

Micro- and meso-scale simulations of magnetospheric processes related to the aurora and substorm morphology

NASA Technical Reports Server (NTRS)

Swift, Daniel W.

1991-01-01

The primary methodology during the grant period has been the use of micro or meso-scale simulations to address specific questions concerning magnetospheric processes related to the aurora and substorm morphology. This approach, while useful in providing some answers, has its limitations. Many of the problems relating to the magnetosphere are inherently global and kinetic. Effort during the last year of the grant period has increasingly focused on development of a global-scale hybrid code to model the entire, coupled magnetosheath - magnetosphere - ionosphere system. In particular, numerical procedures for curvilinear coordinate generation and exactly conservative differencing schemes for hybrid codes in curvilinear coordinates have been developed. The new computer algorithms and the massively parallel computer architectures now make this global code a feasible proposition. Support provided by this project has played an important role in laying the groundwork for the eventual development or a global-scale code to model and forecast magnetospheric weather.

Light-induced quantitative microprinting of biomolecules

NASA Astrophysics Data System (ADS)

Strale, Pierre-Olivier; Azioune, Ammar; Bugnicourt, Ghislain; Lecomte, Yohan; Chahid, Makhlad; Studer, Vincent

2017-02-01

Printing of biomolecules on substrates has developed tremendously in the past few years. The existing methods either rely on slow serial writing processes or on parallelized photolithographic techniques where cumbersome mask alignment procedures usually impair the ability to generate multi-protein patterns. We recently developed a new technology allowing for high resolution multi protein micro-patterning. This technology named "Light-Induced Molecular Adsorption of Proteins (LIMAP)" is based on a water-soluble photo-initiator able to reverse the antifouling property of polymer brushes when exposed to UV light. We developed a wide-field pattern projection system based on a DMD coupled to a conventional microscope which permits to generate arbitrary grayscale patterns of UV light at the micron scale. Interestingly, the density of adsorbed molecules scales with the dose of UV light thus allowing the quantitative patterning of biomolecules. The very low non specific background of biomolecules outside of the UV-exposed areas allows for the sequential printing of multiple proteins without alignment procedures. Protein patterns ranging from 500 nm up to 1 mm can be performed within seconds, as well as gradients of arbitrary shapes. The range of applications of the LIMAP approach extends from the single molecule up to the multicellular scale with an exquisite control over local protein density. We show that it can be used to generate complex protein landscapes useful to study protein-protein, cell-cell and cell-matrix interactions.

A proposed method to estimate premorbid full scale intelligence quotient (FSIQ) for the Canadian Wechsler Intelligence Scale for Children-Fourth Edition (WISC-IV) using demographic and combined estimation procedures.

PubMed

Schoenberg, Mike R; Lange, Rael T; Saklofske, Donald H

2007-11-01

Establishing a comparison standard in neuropsychological assessment is crucial to determining change in function. There is no available method to estimate premorbid intellectual functioning for the Wechsler Intelligence Scale for Children-Fourth Edition (WISC-IV). The WISC-IV provided normative data for both American and Canadian children aged 6 to 16 years old. This study developed regression algorithms as a proposed method to estimate full-scale intelligence quotient (FSIQ) for the Canadian WISC-IV. Participants were the Canadian WISC-IV standardization sample (n = 1,100). The sample was randomly divided into two groups (development and validation groups). The development group was used to generate regression algorithms; 1 algorithm only included demographics, and 11 combined demographic variables with WISC-IV subtest raw scores. The algorithms accounted for 18% to 70% of the variance in FSIQ (standard error of estimate, SEE = 8.6 to 14.2). Estimated FSIQ significantly correlated with actual FSIQ (r = .30 to .80), and the majority of individual FSIQ estimates were within +/-10 points of actual FSIQ. The demographic-only algorithm was less accurate than algorithms combining demographic variables with subtest raw scores. The current algorithms yielded accurate estimates of current FSIQ for Canadian individuals aged 6-16 years old. The potential application of the algorithms to estimate premorbid FSIQ is reviewed. While promising, clinical validation of the algorithms in a sample of children and/or adolescents with known neurological dysfunction is needed to establish these algorithms as a premorbid estimation procedure.

Development of Subscale Fast Cookoff Test (PREPRINT)

DTIC Science & Technology

2006-09-21

The hazards classification procedures have been harmonized with both the UN Test and Criteria Manual for UN Series 1...aimed at the development of a sub-scale alternate test protocol to the external fire test currently required for final hazards classification (HC...external fire test currently required for final hazards classification (HC) of an ordnance system. The specific goal of this part of the task was

Habitat Suitability Index Models: Black-shouldered kite

USGS Publications Warehouse

Faanes, Craig A.; Howard, Rebecca J.

1987-01-01

A review and synthesis of existing information were used to develop a model for evaluating black-shouldered kite habitat quality. The model is scaled to produce an index between 0 (unsuitable habitat) to 1.0 (optimal habitat). Habitat suitability index models are designed for use with the Habitat Evaluation Procedures previously developed by the U.S. Fish and Wildlife Service. Guidelines for model application are provided.

Investigation of the effects of external current systems on the MAGSAT data utilizing grid cell modeling techniques

NASA Technical Reports Server (NTRS)

Klumpar, D. M. (Principal Investigator)

1981-01-01

Progress is reported in reading MAGSAT tapes in modeling procedure developed to compute the magnetic fields at satellite orbit due to current distributions in the ionosphere. The modeling technique utilizes a linear current element representation of the large-scale space-current system.

SYNTHESIS OF HIGHLY FLUORINATED CHLOROFORMATES AND THEIR USE AS DERIVATIZING AGENTS FOR HYDROPHILIC COMPOUNDS AND DRINKING WATER DISINFECTION BY-PRODUCTS

EPA Science Inventory

A rapid, safe and efficient procedure was developed to synthesize perfluorinated chloroformates in the small scale generally required to perform analytical derivatizations. This new family of derivatizing agents allows straightforward derivatization of highly polar compounds, co...

Building Reliable Forecasts of Solar Activity

NASA Technical Reports Server (NTRS)

Kitiashvili, Irina; Wray, Alan; Mansour, Nagi

2017-01-01

Solar ionizing radiation critically depends on the level of the Sun’s magnetic activity. For robust physics-based forecasts, we employ the procedure of data assimilation, which combines theoretical modeling and observational data such that uncertainties in both the model and the observations are taken into account. Currently we are working in two major directions: 1) development of a new long-term forecast procedure on time-scales of the 11-year solar cycle, using a 2-dimensional mean-field dynamo model and synoptic magnetograms; 2) development of 3-dimensional radiative MHD (Magnetohydrodynamic) simulations to investigate the origin and precursors of local manifestations of magnetic activity, such as the formation of magnetic structures and eruptive dynamics.

Two time scale output feedback regulation for ill-conditioned systems

NASA Technical Reports Server (NTRS)

Calise, A. J.; Moerder, D. D.

1986-01-01

Issues pertaining to the well-posedness of a two time scale approach to the output feedback regulator design problem are examined. An approximate quadratic performance index which reflects a two time scale decomposition of the system dynamics is developed. It is shown that, under mild assumptions, minimization of this cost leads to feedback gains providing a second-order approximation of optimal full system performance. A simplified approach to two time scale feedback design is also developed, in which gains are separately calculated to stabilize the slow and fast subsystem models. By exploiting the notion of combined control and observation spillover suppression, conditions are derived assuring that these gains will stabilize the full-order system. A sequential numerical algorithm is described which obtains output feedback gains minimizing a broad class of performance indices, including the standard LQ case. It is shown that the algorithm converges to a local minimum under nonrestrictive assumptions. This procedure is adapted to and demonstrated for the two time scale design formulations.

Compiler-aided systematic construction of large-scale DNA strand displacement circuits using unpurified components

NASA Astrophysics Data System (ADS)

Thubagere, Anupama J.; Thachuk, Chris; Berleant, Joseph; Johnson, Robert F.; Ardelean, Diana A.; Cherry, Kevin M.; Qian, Lulu

2017-02-01

Biochemical circuits made of rationally designed DNA molecules are proofs of concept for embedding control within complex molecular environments. They hold promise for transforming the current technologies in chemistry, biology, medicine and material science by introducing programmable and responsive behaviour to diverse molecular systems. As the transformative power of a technology depends on its accessibility, two main challenges are an automated design process and simple experimental procedures. Here we demonstrate the use of circuit design software, combined with the use of unpurified strands and simplified experimental procedures, for creating a complex DNA strand displacement circuit that consists of 78 distinct species. We develop a systematic procedure for overcoming the challenges involved in using unpurified DNA strands. We also develop a model that takes synthesis errors into consideration and semi-quantitatively reproduces the experimental data. Our methods now enable even novice researchers to successfully design and construct complex DNA strand displacement circuits.

Bringing the CMS distributed computing system into scalable operations

NASA Astrophysics Data System (ADS)

Belforte, S.; Fanfani, A.; Fisk, I.; Flix, J.; Hernández, J. M.; Kress, T.; Letts, J.; Magini, N.; Miccio, V.; Sciabà, A.

2010-04-01

Establishing efficient and scalable operations of the CMS distributed computing system critically relies on the proper integration, commissioning and scale testing of the data and workload management tools, the various computing workflows and the underlying computing infrastructure, located at more than 50 computing centres worldwide and interconnected by the Worldwide LHC Computing Grid. Computing challenges periodically undertaken by CMS in the past years with increasing scale and complexity have revealed the need for a sustained effort on computing integration and commissioning activities. The Processing and Data Access (PADA) Task Force was established at the beginning of 2008 within the CMS Computing Program with the mandate of validating the infrastructure for organized processing and user analysis including the sites and the workload and data management tools, validating the distributed production system by performing functionality, reliability and scale tests, helping sites to commission, configure and optimize the networking and storage through scale testing data transfers and data processing, and improving the efficiency of accessing data across the CMS computing system from global transfers to local access. This contribution reports on the tools and procedures developed by CMS for computing commissioning and scale testing as well as the improvements accomplished towards efficient, reliable and scalable computing operations. The activities include the development and operation of load generators for job submission and data transfers with the aim of stressing the experiment and Grid data management and workload management systems, site commissioning procedures and tools to monitor and improve site availability and reliability, as well as activities targeted to the commissioning of the distributed production, user analysis and monitoring systems.

Development of clean coal and clean soil technologies using advanced agglomeration techniques

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ignasiak, B.; Ignasiak, T.; Szymocha, K.

1990-01-01

Three major topics are discussed in this report: (1) Upgrading of Low Rank Coals by the Agflotherm Process. Test data, procedures, equipment, etc., are described for co-upgrading of subbituminous coals and heavy oil; (2) Upgrading of Bituminous Coals by the Agflotherm Process. Experimental procedures and data, bench and pilot scale equipments, etc., for beneficiating bituminous coals are described; (3) Soil Clean-up and Hydrocarbon Waste Treatment Process. Batch and pilot plant tests are described for soil contaminated by tar refuse from manufactured gas plant sites. (VC)

[Singing as an aid in neonatology].

PubMed

Medrano Poullain, Chrystelle; Milou, Catherine

2015-01-01

Health professionals expect the beneficial effects of singing in neonatology, but remain reluctant to use it. The sensorimotor behaviour of newborns has been analysed when a professional or a mother sings. The results of a qualitative study show that singing before performing a care procedure can modify alertness by favouring interaction and have a positive impact on the behavioural assessment score. During the procedure, singing can help the baby's stability. A factor of well-being for the newborn, this practice could be developed on a wider scale. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Development and validation of the Chinese version of dry eye related quality of life scale.

PubMed

Zheng, Bang; Liu, Xiao-Jing; Sun, Yue-Qian Fiona; Su, Jia-Zeng; Zhao, Yang; Xie, Zheng; Yu, Guang-Yan

2017-07-17

To develop the Chinese version of quality of life scale for dry eye patients based on the Impact of Dry Eye on Everyday Life (IDEEL) questionnaire and to assess the reliability and validity of the developed scale. The original IDEEL was adapted cross-culturally to Chinese language and further developed following standard procedures. A total of 100 Chinese patients diagnosed with dry eye syndrome were included to investigate the psychometric properties of the Chinese version of scale. Psychometric tests included internal consistency (Cronbach's ɑ coefficients), construct validity (exploratory factor analysis), and known-groups validity (the analysis of variance). The Chinese version of Dry Eye Related Quality of Life (CDERQOL) Scale contains 45 items classified into 5 domains. Good to excellent internal consistency reliability was demonstrated for all 5 domains (Cronbach's ɑ coefficients range from 0.716 to 0.913). Construct validity assessment indicated a consistent factorial structure of the CDERQOL scale with hypothesized construct, with the exception of "Dry Eye Symptom-Bother" domain. All domain scores were detected with significant difference across three severity groups of dry eye patients (P < 0.05) except for "Satisfaction with Treatment" domain, indicating good known-groups validity. The results indicated that the CDERQOL scale is a reliable and valid instrument for patients with dry eye syndrome among Chinese population, and could be used as a supplementary diagnostic and treatment-effectiveness measure.

Developing clinical practice guidelines: target audiences, identifying topics for guidelines, guideline group composition and functioning and conflicts of interest

PubMed Central

2012-01-01

Clinical practice guidelines are one of the foundations of efforts to improve health care. In 1999, we authored a paper about methods to develop guidelines. Since it was published, the methods of guideline development have progressed both in terms of methods and necessary procedures and the context for guideline development has changed with the emergence of guideline clearing houses and large scale guideline production organisations (such as the UK National Institute for Health and Clinical Excellence). It therefore seems timely to, in a series of three articles, update and extend our earlier paper. In this first paper we discuss: the target audience(s) for guidelines and their use of guidelines; identifying topics for guidelines; guideline group composition (including consumer involvement) and the processes by which guideline groups function and the important procedural issue of managing conflicts of interest in guideline development. PMID:22762776

Developing clinical practice guidelines: target audiences, identifying topics for guidelines, guideline group composition and functioning and conflicts of interest.

PubMed

Eccles, Martin P; Grimshaw, Jeremy M; Shekelle, Paul; Schünemann, Holger J; Woolf, Steven

2012-07-04

Clinical practice guidelines are one of the foundations of efforts to improve health care. In 1999, we authored a paper about methods to develop guidelines. Since it was published, the methods of guideline development have progressed both in terms of methods and necessary procedures and the context for guideline development has changed with the emergence of guideline clearing houses and large scale guideline production organisations (such as the UK National Institute for Health and Clinical Excellence). It therefore seems timely to, in a series of three articles, update and extend our earlier paper. In this first paper we discuss: the target audience(s) for guidelines and their use of guidelines; identifying topics for guidelines; guideline group composition (including consumer involvement) and the processes by which guideline groups function and the important procedural issue of managing conflicts of interest in guideline development.

Development of a full-scale transmission testing procedure to evaluate advanced lubricants

NASA Technical Reports Server (NTRS)

Lewicki, David G.; Decker, Harry J.; Shimski, John T.

1992-01-01

Experimental tests were performed on the OH-58A helicopter main rotor transmission in the NASA Lewis 500-hp Helicopter Transmission Test Stand. The testing was part of a joint Navy/NASA/Army lubrication program. The objective of the program was to develop a separate lubricant for gearboxes and demonstrate an improved performance in life and load-carrying capacity. The goal of the experiments was to develop a testing procedure to fail certain transmission components using a MIL-L-23699 base reference oil, then run identical tests with improved lubricants and demonstrate performance. The tests were directed at failing components that the Navy has had problems with due to marginal lubrication. These failures included mast shaft bearing micropitting, sun gear and planet bearing fatigue, and spiral bevel gear scoring. A variety of tests were performed and over 900 hours of total run time accumulated for these tests. Some success was achieved in developing a testing procedure to produce sun gear and planet bearing fatigue failures. Only marginal success was achieved in producing mast shaft bearing micropitting and spiral bevel gear scoring.

Technological hurdles to the application of intercalated graphite fibers

NASA Technical Reports Server (NTRS)

Gaier, James R.

1988-01-01

Before intercalated graphite fibers can be developed as an effective power material, there are several technological hurdles which must be overcome. These include the environmental stability, homogeneity and bulk properties, connection procedures, and costs. Strides were made within the last several years in stability and homogeneity of intercalated graphite fibers. Bulk properties and connection procedures are areas of active research now. Costs are still prohibitive for all but the most demanding applications. None of these problems, however, appear to be unsolvable, and their solution may result in wide spread GOC application. The development of a relatively simple technology application, such as EMI shielding, would stimulate the solution of scale-up problems. Once this technology is developed, then more demanding applications, such as power bus bars, may be possible.

Error due to unresolved scales in estimation problems for atmospheric data assimilation

NASA Astrophysics Data System (ADS)

Janjic, Tijana

The error arising due to unresolved scales in data assimilation procedures is examined. The problem of estimating the projection of the state of a passive scalar undergoing advection at a sequence of times is considered. The projection belongs to a finite- dimensional function space and is defined on the continuum. Using the continuum projection of the state of a passive scalar, a mathematical definition is obtained for the error arising due to the presence, in the continuum system, of scales unresolved by the discrete dynamical model. This error affects the estimation procedure through point observations that include the unresolved scales. In this work, two approximate methods for taking into account the error due to unresolved scales and the resulting correlations are developed and employed in the estimation procedure. The resulting formulas resemble the Schmidt-Kalman filter and the usual discrete Kalman filter, respectively. For this reason, the newly developed filters are called the Schmidt-Kalman filter and the traditional filter. In order to test the assimilation methods, a two- dimensional advection model with nonstationary spectrum was developed for passive scalar transport in the atmosphere. An analytical solution on the sphere was found depicting the model dynamics evolution. Using this analytical solution the model error is avoided, and the error due to unresolved scales is the only error left in the estimation problem. It is demonstrated that the traditional and the Schmidt- Kalman filter work well provided the exact covariance function of the unresolved scales is known. However, this requirement is not satisfied in practice, and the covariance function must be modeled. The Schmidt-Kalman filter cannot be computed in practice without further approximations. Therefore, the traditional filter is better suited for practical use. Also, the traditional filter does not require modeling of the full covariance function of the unresolved scales, but only modeling of the covariance matrix obtained by evaluating the covariance function at the observation points. We first assumed that this covariance matrix is stationary and that the unresolved scales are not correlated between the observation points, i.e., the matrix is diagonal, and that the values along the diagonal are constant. Tests with these assumptions were unsuccessful, indicating that a more sophisticated model of the covariance is needed for assimilation of data with nonstationary spectrum. A new method for modeling the covariance matrix based on an extended set of modeling assumptions is proposed. First, it is assumed that the covariance matrix is diagonal, that is, that the unresolved scales are not correlated between the observation points. It is postulated that the values on the diagonal depend on a wavenumber that is characteristic for the unresolved part of the spectrum. It is further postulated that this characteristic wavenumber can be diagnosed from the observations and from the estimate of the projection of the state that is being estimated. It is demonstrated that the new method successfully overcomes previously encountered difficulties.

How many records should be used in ASCE/SEI-7 ground motion scaling procedure?

USGS Publications Warehouse

Reyes, Juan C.; Kalkan, Erol

2012-01-01

U.S. national building codes refer to the ASCE/SEI-7 provisions for selecting and scaling ground motions for use in nonlinear response history analysis of structures. Because the limiting values for the number of records in the ASCE/SEI-7 are based on engineering experience, this study examines the required number of records statistically, such that the scaled records provide accurate, efficient, and consistent estimates of “true” structural responses. Based on elastic–perfectly plastic and bilinear single-degree-of-freedom systems, the ASCE/SEI-7 scaling procedure is applied to 480 sets of ground motions; the number of records in these sets varies from three to ten. As compared to benchmark responses, it is demonstrated that the ASCE/SEI-7 scaling procedure is conservative if fewer than seven ground motions are employed. Utilizing seven or more randomly selected records provides more accurate estimate of the responses. Selecting records based on their spectral shape and design spectral acceleration increases the accuracy and efficiency of the procedure.

Management of Patients with Orthopaedic Implants Undergoing Dental Procedures.

PubMed

Quinn, Robert H; Murray, Jayson N; Pezold, Ryan; Sevarino, Kaitlyn S

2017-07-01

The American Academy of Orthopaedic Surgeons, in collaboration with the American Dental Association, has developed Appropriate Use Criteria (AUC) for the Management of Patients with Orthopaedic Implants Undergoing Dental Procedures. Evidence-based information, in conjunction with the clinical expertise of physicians, was used to develop the criteria to improve patient care and obtain best outcomes while considering the subtleties and distinctions necessary in making clinical decisions. The Management of Patients with Orthopaedic Implants Undergoing Dental Procedures AUC clinical patient scenarios were derived from indications of patients with orthopaedic implants presenting for dental procedures, as well as from current evidence-based clinical practice guidelines and supporting literature to identify the appropriateness of the use of prophylactic antibiotics. The 64 patient scenarios and 1 treatment were developed by the writing panel, a group of clinicians who are specialists in this AUC topic. Next, a separate, multidisciplinary, voting panel (made up of specialists and nonspecialists) rated the appropriateness of treatment of each patient scenario using a 9-point scale to designate a treatment as Appropriate (median rating, 7 to 9), May Be Appropriate (median rating, 4 to 6), or Rarely Appropriate (median rating, 1 to 3).

Physical activity problem-solving inventory for adolescents: development and initial validation.

PubMed

Thompson, Debbe; Bhatt, Riddhi; Watson, Kathy

2013-08-01

Youth encounter physical activity barriers, often called problems. The purpose of problem solving is to generate solutions to overcome the barriers. Enhancing problem-solving ability may enable youth to be more physically active. Therefore, a method for reliably assessing physical activity problem-solving ability is needed. The purpose of this research was to report the development and initial validation of the physical activity problem-solving inventory for adolescents (PAPSIA). Qualitative and quantitative procedures were used. The social problem-solving inventory for adolescents guided the development of the PAPSIA scale. Youth (14- to 17-year-olds) were recruited using standard procedures, such as distributing flyers in the community and to organizations likely to be attended by adolescents. Cognitive interviews were conducted in person. Adolescents completed pen and paper versions of the questionnaire and/or scales assessing social desirability, self-reported physical activity, and physical activity self-efficacy. An expert panel review, cognitive interviews, and a pilot study (n = 129) established content validity. Construct, concurrent, and predictive validity were also established (n = 520 youth). PAPSIA is a promising measure for assessing youth physical activity problem-solving ability. Future research will assess its validity with objectively measured physical activity.

Computer modelling of cyclic deformation of high-temperature materials. Technical progress report, 1 September-30 November 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duesbery, M.S.

1993-11-30

This program aims at improving current methods of lifetime assessment by building in the characteristics of the micro-mechanisms known to be responsible for damage and failure. The broad approach entails the integration and, where necessary, augmentation of the micro-scale research results currently available in the literature into a macro-sale model with predictive capability. In more detail, the program will develop a set of hierarchically structured models at different length scales, from atomic to macroscopic, at each level taking as parametric input the results of the model at the next smaller scale. In this way the known microscopic properties can bemore » transported by systematic procedures to the unknown macro-scale region. It may mot be possible to eliminate empiricism completely, because some of the quantities involved cannot yet be estimated to the required degree of precision. In this case the aim will be at least to eliminate functional empiricism. Restriction of empiricism to the choice of parameters to be input to known functional forms permits some confidence in extrapolation procedures and has the advantage that the models can readily be updated as better estimates of the parameters become available.« less

A Surgical Procedure for Resecting the Mouse Rib: A Model for Large-Scale Long Bone Repair

PubMed Central

Funnell, John W.; Thein, Thu Zan Tun; Mariani, Francesca V.

2015-01-01

This protocol introduces researchers to a new model for large-scale bone repair utilizing the mouse rib. The procedure details the following: preparation of the animal for surgery, opening the thoracic body wall, exposing the desired rib from the surrounding intercostal muscles, excising the desired section of rib without inducing a pneumothorax, and closing the incisions. Compared to the bones of the appendicular skeleton, the ribs are highly accessible. In addition, no internal or external fixator is necessary since the adjacent ribs provide a natural fixation. The surgery uses commercially available supplies, is straightforward to learn, and well-tolerated by the animal. The procedure can be carried out with or without removing the surrounding periosteum, and therefore the contribution of the periosteum to repair can be assessed. Results indicate that if the periosteum is retained, robust repair occurs in 1 - 2 months. We expect that use of this protocol will stimulate research into rib repair and that the findings will facilitate the development of new ways to stimulate bone repair in other locations around the body. PMID:25651082

Habitat Suitability Index Models: Muskellunge

USGS Publications Warehouse

Cook, Mark F.; Solomon, R. Charles

1987-01-01

A review and synthesis of existing information were used to develop a Habitat Suitability Index (HSI) model for the muskellunge (Esox masquinongy Mitchell). The model consolidates habitat use information into a framework appropriate for field application, and is scaled to produce an index between 0.0 (unsuitable habitat) to 1.0 (optimum habitat). HSI models are designed to be used with Habitat Evaluation Procedures previously developed by the U.S. Fish and Wildlife Service.

A Rapid Approach to Modeling Species-Habitat Relationships

NASA Technical Reports Server (NTRS)

Carter, Geoffrey M.; Breinger, David R.; Stolen, Eric D.

2005-01-01

A growing number of species require conservation or management efforts. Success of these activities requires knowledge of the species' occurrence pattern. Species-habitat models developed from GIS data sources are commonly used to predict species occurrence but commonly used data sources are often developed for purposes other than predicting species occurrence and are of inappropriate scale and the techniques used to extract predictor variables are often time consuming and cannot be repeated easily and thus cannot efficiently reflect changing conditions. We used digital orthophotographs and a grid cell classification scheme to develop an efficient technique to extract predictor variables. We combined our classification scheme with a priori hypothesis development using expert knowledge and a previously published habitat suitability index and used an objective model selection procedure to choose candidate models. We were able to classify a large area (57,000 ha) in a fraction of the time that would be required to map vegetation and were able to test models at varying scales using a windowing process. Interpretation of the selected models confirmed existing knowledge of factors important to Florida scrub-jay habitat occupancy. The potential uses and advantages of using a grid cell classification scheme in conjunction with expert knowledge or an habitat suitability index (HSI) and an objective model selection procedure are discussed.

Upscaling Cement Paste Microstructure to Obtain the Fracture, Shear, and Elastic Concrete Mechanical LDPM Parameters.

PubMed

Sherzer, Gili; Gao, Peng; Schlangen, Erik; Ye, Guang; Gal, Erez

2017-02-28

Modeling the complex behavior of concrete for a specific mixture is a challenging task, as it requires bridging the cement scale and the concrete scale. We describe a multiscale analysis procedure for the modeling of concrete structures, in which material properties at the macro scale are evaluated based on lower scales. Concrete may be viewed over a range of scale sizes, from the atomic scale (10 -10 m), which is characterized by the behavior of crystalline particles of hydrated Portland cement, to the macroscopic scale (10 m). The proposed multiscale framework is based on several models, including chemical analysis at the cement paste scale, a mechanical lattice model at the cement and mortar scales, geometrical aggregate distribution models at the mortar scale, and the Lattice Discrete Particle Model (LDPM) at the concrete scale. The analysis procedure starts from a known chemical and mechanical set of parameters of the cement paste, which are then used to evaluate the mechanical properties of the LDPM concrete parameters for the fracture, shear, and elastic responses of the concrete. Although a macroscopic validation study of this procedure is presented, future research should include a comparison to additional experiments in each scale.

Upscaling Cement Paste Microstructure to Obtain the Fracture, Shear, and Elastic Concrete Mechanical LDPM Parameters

PubMed Central

Sherzer, Gili; Gao, Peng; Schlangen, Erik; Ye, Guang; Gal, Erez

2017-01-01

Modeling the complex behavior of concrete for a specific mixture is a challenging task, as it requires bridging the cement scale and the concrete scale. We describe a multiscale analysis procedure for the modeling of concrete structures, in which material properties at the macro scale are evaluated based on lower scales. Concrete may be viewed over a range of scale sizes, from the atomic scale (10−10 m), which is characterized by the behavior of crystalline particles of hydrated Portland cement, to the macroscopic scale (10 m). The proposed multiscale framework is based on several models, including chemical analysis at the cement paste scale, a mechanical lattice model at the cement and mortar scales, geometrical aggregate distribution models at the mortar scale, and the Lattice Discrete Particle Model (LDPM) at the concrete scale. The analysis procedure starts from a known chemical and mechanical set of parameters of the cement paste, which are then used to evaluate the mechanical properties of the LDPM concrete parameters for the fracture, shear, and elastic responses of the concrete. Although a macroscopic validation study of this procedure is presented, future research should include a comparison to additional experiments in each scale. PMID:28772605

Interest in Aesthetic Rhinoplasty Scale.

PubMed

Naraghi, Mohsen; Atari, Mohammad

2017-04-01

Interest in cosmetic surgery is increasing, with rhinoplasty being one of the most popular surgical procedures. It is essential that surgeons identify patients with existing psychological conditions before any procedure. This study aimed to develop and validate the Interest in Aesthetic Rhinoplasty Scale (IARS). Four studies were conducted to develop the IARS and to evaluate different indices of validity (face, content, construct, criterion, and concurrent validities) and reliability (internal consistency, split-half coefficient, and temporal stability) of the scale. The four study samples included a total of 463 participants. Statistical analysis revealed satisfactory psychometric properties in all samples. Scores on the IARS were negatively correlated with self-esteem scores ( r  = -0.296; p  < 0.01) and positively associated with scores for psychopathologic symptoms ( r  = 0.164; p  < 0.05), social dysfunction ( r  = 0.268; p  < 0.01), and depression ( r  = 0.308; p  < 0.01). The internal and test-retest coefficients of consistency were found to be high (α = 0.93; intraclass coefficient = 0.94). Rhinoplasty patients were found to have significantly higher IARS scores than nonpatients ( p  < 0.001). Findings of the present studies provided evidence for face, content, construct, criterion, and concurrent validities and internal and test-retest reliability of the IARS. This evidence supports the use of the scale in clinical and research settings. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Identifying Differential Item Functioning of Rating Scale Items with the Rasch Model: An Introduction and an Application

ERIC Educational Resources Information Center

Myers, Nicholas D.; Wolfe, Edward W.; Feltz, Deborah L.; Penfield, Randall D.

2006-01-01

This study (a) provided a conceptual introduction to differential item functioning (DIF), (b) introduced the multifaceted Rasch rating scale model (MRSM) and an associated statistical procedure for identifying DIF in rating scale items, and (c) applied this procedure to previously collected data from American coaches who responded to the coaching…

Inverse finite-size scaling for high-dimensional significance analysis

NASA Astrophysics Data System (ADS)

Xu, Yingying; Puranen, Santeri; Corander, Jukka; Kabashima, Yoshiyuki

2018-06-01

We propose an efficient procedure for significance determination in high-dimensional dependence learning based on surrogate data testing, termed inverse finite-size scaling (IFSS). The IFSS method is based on our discovery of a universal scaling property of random matrices which enables inference about signal behavior from much smaller scale surrogate data than the dimensionality of the original data. As a motivating example, we demonstrate the procedure for ultra-high-dimensional Potts models with order of 1010 parameters. IFSS reduces the computational effort of the data-testing procedure by several orders of magnitude, making it very efficient for practical purposes. This approach thus holds considerable potential for generalization to other types of complex models.

Pilot interaction with automated airborne decision making systems

NASA Technical Reports Server (NTRS)

Rouse, W. B.; Hammer, J. M.; Morris, N. M.; Brown, E. N.; Yoon, W. C.

1983-01-01

The use of advanced software engineering methods (e.g., from artificial intelligence) to aid aircraft crews in procedure selection and execution is investigated. Human problem solving in dynamic environments as effected by the human's level of knowledge of system operations is examined. Progress on the development of full scale simulation facilities is also discussed.

Investigation of the effects of external current systems on the MAGSAT data utilizing grid cell modeling techniques

NASA Technical Reports Server (NTRS)

Klumpar, D. M. (Principal Investigator)

1982-01-01

The status of the initial testing of the modeling procedure developed to compute the magnetic fields at satellite orbit due to current distributions in the ionosphere and magnetosphere is reported. The modeling technique utilizes a linear current element representation of the large scale space-current system.

Strategies for Impact: Enabling E-Learning Project Initiatives

ERIC Educational Resources Information Center

Csete, Josephine; Evans, Jennifer

2013-01-01

Purpose: The paper aims to focus on institutional initiatives to embed e-learning in a university in Hong Kong, from 2006-12, through large-scale funding of 43 e-learning projects. It outlines the guiding principles behind the university's e-learning development and discusses the significance of various procedures and practices in project…

Data Cleaning in Mathematics Education Research: The Overlooked Methodological Step

ERIC Educational Resources Information Center

Hubbard, Aleata

2017-01-01

The results of educational research studies are only as accurate as the data used to produce them. Drawing on experiences conducting large-scale efficacy studies of classroom-based algebra interventions for community college and middle school students, I am developing practice-based data cleaning procedures to support scholars in conducting…

Development of the Glass Electrode and the pH Response

ERIC Educational Resources Information Center

Graham, Daniel J.; Jaselskis, Bruno; Moore, Carl E.

2013-01-01

The glass electrode is the most commonly used device to access the pH of an aqueous solution. It attains highly accurate measurements via simple and well-established procedures. However, the reasons why the glass electrode potential scales with hydrogen ion concentration according to almost Nernstian potential values have been long-standing…

Interpretation of the Rasch Ability and Difficulty Scales for Educational Purposes.

ERIC Educational Resources Information Center

Woodcock, Richard W.

Though many test developers have utilized item response theory in their work, few have taken advantage of the potential of item response theory for providing new interpretation procedures that accentuate the educational implications to be drawn from test scores. This paper describes several features, based upon the Rasch difficulty and ability…

NetVLAD: CNN Architecture for Weakly Supervised Place Recognition.

PubMed

Arandjelovic, Relja; Gronat, Petr; Torii, Akihiko; Pajdla, Tomas; Sivic, Josef

2018-06-01

We tackle the problem of large scale visual place recognition, where the task is to quickly and accurately recognize the location of a given query photograph. We present the following four principal contributions. First, we develop a convolutional neural network (CNN) architecture that is trainable in an end-to-end manner directly for the place recognition task. The main component of this architecture, NetVLAD, is a new generalized VLAD layer, inspired by the "Vector of Locally Aggregated Descriptors" image representation commonly used in image retrieval. The layer is readily pluggable into any CNN architecture and amenable to training via backpropagation. Second, we create a new weakly supervised ranking loss, which enables end-to-end learning of the architecture's parameters from images depicting the same places over time downloaded from Google Street View Time Machine. Third, we develop an efficient training procedure which can be applied on very large-scale weakly labelled tasks. Finally, we show that the proposed architecture and training procedure significantly outperform non-learnt image representations and off-the-shelf CNN descriptors on challenging place recognition and image retrieval benchmarks.

Modelling municipal solid waste generation: a review.

PubMed

Beigl, Peter; Lebersorger, Sandra; Salhofer, Stefan

2008-01-01

The objective of this paper is to review previously published models of municipal solid waste generation and to propose an implementation guideline which will provide a compromise between information gain and cost-efficient model development. The 45 modelling approaches identified in a systematic literature review aim at explaining or estimating the present or future waste generation using economic, socio-demographic or management-orientated data. A classification was developed in order to categorise these highly heterogeneous models according to the following criteria--the regional scale, the modelled waste streams, the hypothesised independent variables and the modelling method. A procedural practice guideline was derived from a discussion of the underlying models in order to propose beneficial design options concerning regional sampling (i.e., number and size of observed areas), waste stream definition and investigation, selection of independent variables and model validation procedures. The practical application of the findings was demonstrated with two case studies performed on different regional scales, i.e., on a household and on a city level. The findings of this review are finally summarised in the form of a relevance tree for methodology selection.

Evaluating flow cytometer performance with weighted quadratic least squares analysis of LED and multi-level bead data

PubMed Central

Parks, David R.; Khettabi, Faysal El; Chase, Eric; Hoffman, Robert A.; Perfetto, Stephen P.; Spidlen, Josef; Wood, James C.S.; Moore, Wayne A.; Brinkman, Ryan R.

2017-01-01

We developed a fully automated procedure for analyzing data from LED pulses and multi-level bead sets to evaluate backgrounds and photoelectron scales of cytometer fluorescence channels. The method improves on previous formulations by fitting a full quadratic model with appropriate weighting and by providing standard errors and peak residuals as well as the fitted parameters themselves. Here we describe the details of the methods and procedures involved and present a set of illustrations and test cases that demonstrate the consistency and reliability of the results. The automated analysis and fitting procedure is generally quite successful in providing good estimates of the Spe (statistical photoelectron) scales and backgrounds for all of the fluorescence channels on instruments with good linearity. The precision of the results obtained from LED data is almost always better than for multi-level bead data, but the bead procedure is easy to carry out and provides results good enough for most purposes. Including standard errors on the fitted parameters is important for understanding the uncertainty in the values of interest. The weighted residuals give information about how well the data fits the model, and particularly high residuals indicate bad data points. Known photoelectron scales and measurement channel backgrounds make it possible to estimate the precision of measurements at different signal levels and the effects of compensated spectral overlap on measurement quality. Combining this information with measurements of standard samples carrying dyes of biological interest, we can make accurate comparisons of dye sensitivity among different instruments. Our method is freely available through the R/Bioconductor package flowQB. PMID:28160404

Invasive Procedures in Preterm Children: Brain and Cognitive Development at School Age

PubMed Central

Vinall, Jillian; Miller, Steven P.; Bjornson, Bruce H.; Fitzpatrick, Kevin P.V.; Poskitt, Kenneth J.; Brant, Rollin; Synnes, Anne R.; Cepeda, Ivan L.

2014-01-01

BACKGROUND: Very preterm infants (born 24–32 weeks’ gestation) undergo numerous invasive procedures during neonatal care. Repeated skin-breaking procedures in rodents cause neuronal cell death, and in human preterm neonates higher numbers of invasive procedures from birth to term-equivalent age are associated with abnormal brain development, even after controlling for other clinical risk factors. It is unknown whether higher numbers of invasive procedures are associated with long-term alterations in brain microstructure and cognitive outcome at school age in children born very preterm. METHODS: Fifty children born very preterm underwent MRI and cognitive testing at median age 7.6 years (interquartile range, 7.5–7.7). T1- and T2-weighted images were assessed for the severity of brain injury. Magnetic resonance diffusion tensor sequences were used to measure fractional anisotropy (FA), an index of white matter (WM) maturation, from 7 anatomically defined WM regions. Child cognition was assessed using the Wechsler Intelligence Scale for Children–IV. Multivariate modeling was used to examine relationships between invasive procedures, brain microstructure, and cognition, adjusting for clinical confounders (eg, infection, ventilation, brain injury). RESULTS: Greater numbers of invasive procedures were associated with lower FA values of the WM at age 7 years (P = .01). The interaction between the number of procedures and FA was associated with IQ (P = .02), such that greater numbers of invasive procedures and lower FA of the superior WM were related to lower IQ. CONCLUSIONS: Invasive procedures during neonatal care contribute to long-term abnormalities in WM microstructure and lower IQ. PMID:24534406

A decision support system for adaptive real-time management ofseasonal wetlands in California

DOE Office of Scientific and Technical Information (OSTI.GOV)

Quinn, Nigel W.T.; Hanna, W. Mark

This paper describes the development of a comprehensive flow and salinity monitoring system and application of a decision support system (DSS) to improve management of seasonal wetlands in the San Joaquin Valley of California. The Environmental Protection Agency regulates salinity discharges from non-point sources to the San Joaquin River using a procedure known as the Total Maximum Daily Load (TMDL) to allocate the assimilative capacity of the River for salt among watershed sources. Management of wetland sources of salt load will require the development of monitoring systems, more integrative management strategies and coordination with other entities. To obtain local cooperationmore » the Grassland Water District, whose primary function is to supply surface water to private duck clubs and managed wetlands, needs to communicate to local landowners the likely impacts of salinity regulation on the long term health and function of wildfowl habitat. The project described in this paper will also provide this information. The models that form the backbone of the DSS develop salinity balances at both a regional and local scale. The regional scale concentrates on deliveries to and exports from the Grasland Water District while the local scale focuses on an individual wetland unit where more intensive monitoring is being conducted. The design of the DSS is constrained to meet the needs of busy wetland managers and is being designed from the bottom up utilizing tools and procedures familiar to these individuals.« less

Task analysis exemplified: the process of resolving unfinished business.

PubMed

Greenberg, L S; Foerster, F S

1996-06-01

The steps of a task-analytic research program designed to identify the in-session performances involved in resolving lingering bad feelings toward a significant other are described. A rational-empirical methodology of repeatedly cycling between rational conjecture and empirical observations is demonstrated as a method of developing an intervention manual and the components of client processes of resolution. A refined model of the change process developed by these procedures is validated by comparing 11 successful and 11 unsuccessful performances. Four performance components-intense expression of feeling, expression of need, shift in representation of other, and self-validation or understanding of the other-were found to discriminate between resolution and nonresolution performances. These components were measured on 4 process measures: the Structural Analysis of Social Behavior, the Experiencing Scale, the Client's Emotional Arousal Scale, and a need scale.

[Measuring job satisfaction: development of a multidimensional scale].

PubMed

Faraci, Palmira; Valenti, Giusy

2016-01-01

Although numerous studies have been done on the topic ofjob satisfaction, as regards the Italian research, the construction of specific psychometric instruments is lacking. The present paper is aimed to develop a scale to measure job satisfaction referring to our cultural context. Participants were 222 workers (36.5% males, 63.5% females) with an average age of 38.39 years (SD = 10.91). The formulated items were selected from a large item pool on the basis of the evaluation by a group of expert judges, and the item analysis procedure. In order to establish test validity, the following instruments were also administered: Occupational Stress Indicator, Satisfaction With Life Scale, Rosenberg Self-Esteem Scale, Multidimensional Scale of Perceived Social Support, and Beck Depression Inventory. Both exploratory and confirmatory factor analyses highlighted a 6-factor structure. Those factors were responsible for 51.30% of the total variance. Reliability analyses indicated satisfying internal consistency (ranging from alpha = .73 to alpha = .86). Construct validity was supported by results obtained calculating correlations with the theoretically associated variables. Our findings suggest promising psychometric properties for the presented measure. The instrument could be used in specific programs developed to promote well-being conditions in work settings.

Development of a Dynamically Scaled Generic Transport Model Testbed for Flight Research Experiments

NASA Technical Reports Server (NTRS)

Jordan, Thomas; Langford, William; Belcastro, Christine; Foster, John; Shah, Gautam; Howland, Gregory; Kidd, Reggie

2004-01-01

This paper details the design and development of the Airborne Subscale Transport Aircraft Research (AirSTAR) test-bed at NASA Langley Research Center (LaRC). The aircraft is a 5.5% dynamically scaled, remotely piloted, twin-turbine, swept wing, Generic Transport Model (GTM) which will be used to provide an experimental flight test capability for research experiments pertaining to dynamics modeling and control beyond the normal flight envelope. The unique design challenges arising from the dimensional, weight, dynamic (inertial), and actuator scaling requirements necessitated by the research community are described along with the specific telemetry and control issues associated with a remotely piloted subscale research aircraft. Development of the necessary operational infrastructure, including operational and safety procedures, test site identification, and research pilots is also discussed. The GTM is a unique vehicle that provides significant research capacity due to its scaling, data gathering, and control characteristics. By combining data from this testbed with full-scale flight and accident data, wind tunnel data, and simulation results, NASA will advance and validate control upset prevention and recovery technologies for transport aircraft, thereby reducing vehicle loss-of-control accidents resulting from adverse and upset conditions.

A reproducible and scalable procedure for preparing bacterial extracts for cell-free protein synthesis.

PubMed

Katsura, Kazushige; Matsuda, Takayoshi; Tomabechi, Yuri; Yonemochi, Mayumi; Hanada, Kazuharu; Ohsawa, Noboru; Sakamoto, Kensaku; Takemoto, Chie; Shirouzu, Mikako

2017-11-01

Cell-free protein synthesis is a useful method for preparing proteins for functional or structural analyses. However, batch-to-batch variability with regard to protein synthesis activity remains a problem for large-scale production of cell extract in the laboratory. To address this issue, we have developed a novel procedure for large-scale preparation of bacterial cell extract with high protein synthesis activity. The developed procedure comprises cell cultivation using a fermentor, harvesting and washing of cells by tangential flow filtration, cell disruption with high-pressure homogenizer and continuous diafiltration. By optimizing and combining these methods, ∼100 ml of the cell extract was prepared from 150 g of Escherichia coli cells. The protein synthesis activities, defined as the yield of protein per unit of absorbance at 260 nm of the cell extract, were shown to be reproducible, and the average activity of several batches was twice that obtained using a previously reported method. In addition, combinatorial use of the high-pressure homogenizer and diafiltration increased the scalability, indicating that the cell concentration at disruption varies from 0.04 to 1 g/ml. Furthermore, addition of Gam protein and examinations of the N-terminal sequence rendered the extract prepared here useful for rapid screening with linear DNA templates. © The Authors 2017. Published by Oxford University Press on behalf of the Japanese Biochemical Society. All rights reserved.

A Permutation Approach for Selecting the Penalty Parameter in Penalized Model Selection

PubMed Central

Sabourin, Jeremy A; Valdar, William; Nobel, Andrew B

2015-01-01

Summary We describe a simple, computationally effcient, permutation-based procedure for selecting the penalty parameter in LASSO penalized regression. The procedure, permutation selection, is intended for applications where variable selection is the primary focus, and can be applied in a variety of structural settings, including that of generalized linear models. We briefly discuss connections between permutation selection and existing theory for the LASSO. In addition, we present a simulation study and an analysis of real biomedical data sets in which permutation selection is compared with selection based on the following: cross-validation (CV), the Bayesian information criterion (BIC), Scaled Sparse Linear Regression, and a selection method based on recently developed testing procedures for the LASSO. PMID:26243050

Quantification of Ice Accretions for Icing Scaling Evaluations

NASA Technical Reports Server (NTRS)

Ruff, Gary A.; Anderson, David N.

2003-01-01

The comparison of ice accretion characteristics is an integral part of aircraft icing research. It is often necessary to compare an ice accretion obtained from a flight test or numerical simulation to one produced in an icing wind tunnel or for validation of an icing scaling method. Traditionally, this has been accomplished by overlaying two-dimensional tracings of ice accretion shapes. This paper addresses the basic question of how to compare ice accretions using more quantitative methods. For simplicity, geometric characteristics of the ice accretions are used for the comparison. One method evaluated is a direct comparison of the percent differences of the geometric measurements. The second method inputs these measurements into a fuzzy inference system to obtain a single measure of the goodness of the comparison. The procedures are demonstrated by comparing ice shapes obtained in the Icing Research Tunnel at NASA Glenn Research Center during recent icing scaling tests. The results demonstrate that this type of analysis is useful in quantifying the similarity of ice accretion shapes and that the procedures should be further developed by expanding the analysis to additional icing data sets.

Estimating human-equivalent no observed adverse-effect levels for VOCs (volatile organic compounds) based on minimal knowledge of physiological parameters. Technical paper

DOE Office of Scientific and Technical Information (OSTI.GOV)

Overton, J.H.; Jarabek, A.M.

1989-01-01

The U.S. EPA advocates the assessment of health-effects data and calculation of inhaled reference doses as benchmark values for gauging systemic toxicity to inhaled gases. The assessment often requires an inter- or intra-species dose extrapolation from no observed adverse effect level (NOAEL) exposure concentrations in animals to human equivalent NOAEL exposure concentrations. To achieve this, a dosimetric extrapolation procedure was developed based on the form or type of equations that describe the uptake and disposition of inhaled volatile organic compounds (VOCs) in physiologically-based pharmacokinetic (PB-PK) models. The procedure assumes allometric scaling of most physiological parameters and that the value ofmore » the time-integrated human arterial-blood concentration must be limited to no more than to that of experimental animals. The scaling assumption replaces the need for most parameter values and allows the derivation of a simple formula for dose extrapolation of VOCs that gives equivalent or more-conservative exposure concentrations values than those that would be obtained using a PB-PK model in which scaling was assumed.« less

The Consumer Motivation Scale: A detailed review of item generation, exploration, confirmation, and validation procedures.

PubMed

Barbopoulos, I; Johansson, L-O

2017-08-01

This data article offers a detailed description of analyses pertaining to the development of the Consumer Motivation Scale (CMS), from item generation and the extraction of factors, to confirmation of the factor structure and validation of the emergent dimensions. The established goal structure - consisting of the sub-goals Value for Money, Quality, Safety, Stimulation, Comfort, Ethics, and Social Acceptance - is shown to be related to a variety of consumption behaviors in different contexts and for different products, and should thereby prove useful in standard marketing research, as well as in the development of tailored marketing strategies, and the segmentation of consumer groups, settings, brands, and products.

Preparative scale separation of thulium from erbium for neutron capture cross section measurements - Part: Preparative scale

DOE PAGES

Birnbaum, Eva R.; Bene, Balazs J.; Taylor, Wayne Allen; ...

2016-06-04

Here, this paper discusses the development of a separation method for isolation of Tm-171 from a half-gram irradiated erbium target in support of stockpile stewardship and astrophysics research. The developed procedure is based on cation exchange separation using alpha-hydroxyisobutyric acid (α-HIBA) as chelating agent. It is able to achieve either a decontamination factor of 1.4(4) × 10 5 with 68.9(3) % recovery or 95.4(3) % recovery with a decontamination factor of 5.82(7) × 10 3 for a mock 500-mg target containing 17.9 mg thulium in a single pass-through at room temperature.

Rapid Two-Step Procedure for Large-Scale Purification of Pediocin-Like Bacteriocins and Other Cationic Antimicrobial Peptides from Complex Culture Medium

PubMed Central

Uteng, Marianne; Hauge, Håvard Hildeng; Brondz, Ilia; Nissen-Meyer, Jon; Fimland, Gunnar

2002-01-01

A rapid and simple two-step procedure suitable for both small- and large-scale purification of pediocin-like bacteriocins and other cationic peptides has been developed. In the first step, the bacterial culture was applied directly on a cation-exchange column (1-ml cation exchanger per 100-ml cell culture). Bacteria and anionic compounds passed through the column, and cationic bacteriocins were subsequently eluted with 1 M NaCl. In the second step, the bacteriocin fraction was applied on a low-pressure, reverse-phase column and the bacteriocins were detected as major optical density peaks upon elution with propanol. More than 80% of the activity that was initially in the culture supernatant was recovered in both purification steps, and the final bacteriocin preparation was more than 90% pure as judged by analytical reverse-phase chromatography and capillary electrophoresis. PMID:11823243

Linear regression in astronomy. II

NASA Technical Reports Server (NTRS)

Feigelson, Eric D.; Babu, Gutti J.

1992-01-01

A wide variety of least-squares linear regression procedures used in observational astronomy, particularly investigations of the cosmic distance scale, are presented and discussed. The classes of linear models considered are (1) unweighted regression lines, with bootstrap and jackknife resampling; (2) regression solutions when measurement error, in one or both variables, dominates the scatter; (3) methods to apply a calibration line to new data; (4) truncated regression models, which apply to flux-limited data sets; and (5) censored regression models, which apply when nondetections are present. For the calibration problem we develop two new procedures: a formula for the intercept offset between two parallel data sets, which propagates slope errors from one regression to the other; and a generalization of the Working-Hotelling confidence bands to nonstandard least-squares lines. They can provide improved error analysis for Faber-Jackson, Tully-Fisher, and similar cosmic distance scale relations.

Are we really measuring what we say we're measuring? Using video techniques to supplement traditional construct validation procedures.

PubMed

Podsakoff, Nathan P; Podsakoff, Philip M; Mackenzie, Scott B; Klinger, Ryan L

2013-01-01

Several researchers have persuasively argued that the most important evidence to consider when assessing construct validity is whether variations in the construct of interest cause corresponding variations in the measures of the focal construct. Unfortunately, the literature provides little practical guidance on how researchers can go about testing this. Therefore, the purpose of this article is to describe how researchers can use video techniques to test whether their scales measure what they purport to measure. First, we discuss how researchers can develop valid manipulations of the focal construct that they hope to measure. Next, we explain how to design a study to use this manipulation to test the validity of the scale. Finally, comparing and contrasting traditional and contemporary perspectives on validation, we discuss the advantages and limitations of video-based validation procedures. PsycINFO Database Record (c) 2013 APA, all rights reserved.

Projector-based virtual reality dome environment for procedural pain and anxiety in young children with burn injuries: a pilot study.

PubMed

Khadra, Christelle; Ballard, Ariane; Déry, Johanne; Paquin, David; Fortin, Jean-Simon; Perreault, Isabelle; Labbe, David R; Hoffman, Hunter G; Bouchard, Stéphane; LeMay, Sylvie

2018-01-01

Virtual reality (VR) is a non-pharmacological method to distract from pain during painful procedures. However, it was never tested in young children with burn injuries undergoing wound care. We aimed to assess the feasibility and acceptability of the study process and the use of VR for procedural pain management. From June 2016 to January 2017, we recruited children from 2 months to 10 years of age with burn injuries requiring a hydrotherapy session in a pediatric university teaching hospital in Montreal. Each child received the projector-based VR intervention in addition to the standard pharmacological treatment. Data on intervention and study feasibility and acceptability in addition to measures on pain (Face, Legs, Activity, Cry, Consolability scale), baseline (Modified Smith Scale) and procedural (Procedure Behavior Check List) anxiety, comfort (OCCEB-BECCO [behavioral observational scale of comfort level for child burn victims]), and sedation (Ramsay Sedation Scale) were collected before, during, and after the procedure. Data analyses included descriptive and non-parametric inferential statistics. We recruited 15 children with a mean age of 2.2±2.1 years and a mean total body surface area of 5% (±4). Mean pain score during the procedure was low (2.9/10, ±3), as was the discomfort level (2.9/10, ±2.8). Most children were cooperative, oriented, and calm. Assessing anxiety was not feasible with our sample of participants. The prototype did not interfere with the procedure and was considered useful for procedural pain management by most health care professionals. The projector-based VR is a feasible and acceptable intervention for procedural pain management in young children with burn injuries. A larger trial with a control group is required to assess its efficacy.

Projector-based virtual reality dome environment for procedural pain and anxiety in young children with burn injuries: a pilot study

PubMed Central

Khadra, Christelle; Ballard, Ariane; Déry, Johanne; Paquin, David; Fortin, Jean-Simon; Perreault, Isabelle; Labbe, David R; Hoffman, Hunter G; Bouchard, Stéphane

2018-01-01

Background Virtual reality (VR) is a non-pharmacological method to distract from pain during painful procedures. However, it was never tested in young children with burn injuries undergoing wound care. Aim We aimed to assess the feasibility and acceptability of the study process and the use of VR for procedural pain management. Methods From June 2016 to January 2017, we recruited children from 2 months to 10 years of age with burn injuries requiring a hydrotherapy session in a pediatric university teaching hospital in Montreal. Each child received the projector-based VR intervention in addition to the standard pharmacological treatment. Data on intervention and study feasibility and acceptability in addition to measures on pain (Face, Legs, Activity, Cry, Consolability scale), baseline (Modified Smith Scale) and procedural (Procedure Behavior Check List) anxiety, comfort (OCCEB-BECCO [behavioral observational scale of comfort level for child burn victims]), and sedation (Ramsay Sedation Scale) were collected before, during, and after the procedure. Data analyses included descriptive and non-parametric inferential statistics. Results We recruited 15 children with a mean age of 2.2±2.1 years and a mean total body surface area of 5% (±4). Mean pain score during the procedure was low (2.9/10, ±3), as was the discomfort level (2.9/10, ±2.8). Most children were cooperative, oriented, and calm. Assessing anxiety was not feasible with our sample of participants. The prototype did not interfere with the procedure and was considered useful for procedural pain management by most health care professionals. Conclusion The projector-based VR is a feasible and acceptable intervention for procedural pain management in young children with burn injuries. A larger trial with a control group is required to assess its efficacy. PMID:29491717

Habitat Suitability Index Models: Hairy woodpecker

USGS Publications Warehouse

Sousa, Patrick J.

1987-01-01

A review and synthesis of existing information were used to develop a Habitat Suitability Index (HSI) model for the hairy woodpecker (Picoides villosus). The model consolidates habitat use information into a framework appropriate for field application, and is scaled to produce an index between 0.0 (unsuitable habitat) to 1.0 (optimum habitat). HSI models are designed to be used with Habitat Evaluation Procedures previously developed by the U.S. Fish and Wildlife Service.

Habitat Suitability Index Models: Diamondback terrapin (nesting) - Atlantic coast

USGS Publications Warehouse

Palmer, William M.; Cordes, Carroll L.

1988-01-01

A review and synthesis of existing information were used to develop a Habitat Suitability Index (HSI) model for the diamondback terrapin (Malaclemys terrapin). The model consolidates habitat use information into a framework appropriate for field application, and is scaled to produce an index between 0.0 (unsuitable habitat) to 1.0 (optimum habitat). HSI models are designed to be used with Habitat Evaluation Procedures previously developed by the U.S. Fish and Wildlife Service.

Habitat Suitability Index Models: Snapping turtle

USGS Publications Warehouse

Graves, Brent M.; Anderson, Stanley H.

1987-01-01

A review and synthesis of existing information were used to develop a Habitat Suitability Index (HSI) model for the snapping turtle (Chelydra serpentina). The model consolidates habitat use information into a framework appropriate for field application, and is scaled to produce an index between 0.0 (unsuitable habitat) and 1.0 (optimum habitat). HSI models are designed to be used with Habitat Evaluation Procedures previously developed by the U.S. Fish and Wildlife Service.

Habitat Suitability Index Models: Red-winged blackbird

USGS Publications Warehouse

Short, Henry L.

1985-01-01

A review and synthesis of existing information were used to develop a Habitat Suitability Index (HSI) model for the red-winged blackbird (Agelaius phoeniceus L.). The model consolidates habitat use information into a framework appropriate for field application, and is scaled to produce an index between 0.0 (unsuitable habitat) to 1.0 (optimum habitat). HSI models are designed to be used with Habitat Evaluation Procedures previously developed by the U.S. Fish and Wildlife Service.

Habitat Suitability Index Models: Spotted owl

USGS Publications Warehouse

Laymon, Stephen A.; Salwasser, Hal; Barrett, Reginald H.

1985-01-01

A review and synthesis of existing information were used to develop a Habitat Suitability Index (HSI) model for the spotted owl (Strix occidentalis). The model consolidates habitat use information into a framework appropriate for field application, and is scaled to produce an index between 0.0 (unsuitable habitat) to 1.0 (optimum habitat). HSI models are designed to be used with Habitat Evaluation Procedures previously developed by the U.S. Fish and Wildlife Service.

Improvement of burn pain management through routine pain monitoring and pain management protocol.

PubMed

Yang, Hyeong Tae; Hur, Giyeun; Kwak, In-Suk; Yim, Haejun; Cho, Yong Suk; Kim, Dohern; Hur, Jun; Kim, Jong Hyun; Lee, Boung Chul; Seo, Cheong Hoon; Chun, Wook

2013-06-01

Pain management is an important aspect of burn management. We developed a routine pain monitoring system and pain management protocol for burn patients. The purpose of this study is to evaluate the effectiveness of our new pain management system. From May 2011 to November 2011, the prospective study was performed with 107 burn patients. We performed control group (n=58) data analysis and then developed the pain management protocol and monitoring system. Next, we applied our protocol to patients and performed protocol group (n=49) data analysis, and compared this to control group data. Data analysis was performed using the Numeric Rating Scale (NRS) of background pain and procedural pain, Clinician-Administered PTSD Scale (CAPS), Hamilton Depression Rating Scale (HDRS), State-Trait Anxiety Inventory Scale (STAIS), and Holmes and Rahe Stress Scale (HRSS). The NRS of background pain for the protocol group was significantly decreased compared to the control group (2.8±2.0 versus 3.9±1.9), and the NRS of procedural pain of the protocol group was significantly decreased compared to the control group (4.8±2.8 versus 3.7±2.5). CAPS and HDRS were decreased in the protocol group, but did not have statistical significance. STAIS and HRSS were decreased in the protocol group, but only the STAIS had statistical significance. Our new pain management system was effective in burn pain management. However, adequate pain management can only be accomplished by a continuous and thorough effort. Therefore, pain control protocol and pain monitoring systems need to be under constant revision and improvement using creative ideas and approaches. Copyright © 2012 Elsevier Ltd and ISBI. All rights reserved.

Evaluation of Three Pain Assessment Scales Used for Ventilated Neonates.

PubMed

Huang, Xiao-Zhi; Li, Li; Zhou, Jun; He, Fang; Zhong, Chun-Xia; Wang, Bin

2018-06-26

To compare and evaluate the reliability, validity, feasibility, clinical utility, and nurses' preference of the Premature Infant Pain Profile-Revised (PIPP-R), the Neonatal Pain, Agitation, and Sedation Scale (N-PASS), and the Neonatal Infant Acute Pain Assessment Scale (NIAPAS) used for procedural pain in ventilated neonates. Procedural pain is a common phenomenon but is undermanaged and underassessed in hospitalized neonates. Information for clinician selecting pain measurements to improve neonatal care and outcomes are still limited. A prospective observational study and adheres to the relevant EQUATOR guidelines. A total of 1080 pain assessments were made at 90 neonates by two nurses independently, using three scales viewing three phases of videotaped painful (arterial blood sampling) and non-painful procedures (diaper change). Internal consistency, inter-rater reliability, discriminant validity, concurrent validity and convergent validity of scales were analyzed. Feasibility, clinical utility, and nurses' preference of scales were also investigated. All three scales showed excellent inter-raters coefficients (from 0.991 to 0.992) and good internal consistency (0.733 for the PIPP-R, 0.837 for the N-PASS and 0.836 for the NIAPAS, respectively). Scores of painful and nonpainful procedures on the three scales changed significantly across the phases. There was a strong correlation between the three scales with adequate limits of agreement. The mean scores of the N-PASS for feasibility and utility were significantly higher than those of the NIAPAS, but not significantly higher than those of the PIPP-R. The N-PASS was mostly preferred by 55.9% of the nurses, followed by the NIAPAS (23.5%) and the PIPP-R (20.6%). The three scales are all reliable and valid, but the N-PASS and the NIAPAS performs better in reliability. The N-PASS appears to be a better choice for frontier nurses to assess procedural pain in ventilated neonates based on its good feasibility, utility, and nurses' preference. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Development and inter-rater reliability of a standardized verbal instruction manual for the Chinese Geriatric Depression Scale-short form.

PubMed

Wong, M T P; Ho, T P; Ho, M Y; Yu, C S; Wong, Y H; Lee, S Y

2002-05-01

The Geriatric Depression Scale (GDS) is a common screening tool for elderly depression in Hong Kong. This study aimed at (1) developing a standardized manual for the verbal administration and scoring of the GDS-SF, and (2) comparing the inter-rater reliability between the standardized and non-standardized verbal administration of GDS-SF. Two studies were reported. In Study 1, the process of developing the manual was described. In Study 2, we compared the inter-rater reliabilities of GDS-SF scores using the standardized verbal instructions and the traditional non-standardized administration. Results of Study 2 indicated that the standardized procedure in verbal administration and scoring improved the inter-rater reliabilities of GDS-SF. Copyright 2002 John Wiley & Sons, Ltd.

Research on solar pumped liquid lasers

NASA Technical Reports Server (NTRS)

Cox, J. D.; Kurzweg, U. H.; Weinstein, N. H.; Schneider, R. T.

1985-01-01

A solar pumped liquid laser that can be scaled up to high power (10 mW CW) for space applications was developed. Liquid lasers have the advantage over gases in that they provide much higher lasant densities and thus high-power densities. Liquids also have advantages over solids in that they have much higher damage thresholds and are much cheaper to produce for large scale applications. Among the liquid laser media that are potential candidates for solar pumping, the POC13: Nd sup 3+:ZrC14 liquid was chosen for its high intrinsic efficiency and its relatively good stability against decomposition due to protic contamination. The development of a manufacturing procedure and performance testing of the laser, liquid and the development of an inexpensive large solar concentrator to pump the laser are examined.

Structural Tailoring of Advanced Turboprops (STAT)

NASA Technical Reports Server (NTRS)

Brown, Kenneth W.

1988-01-01

This interim report describes the progress achieved in the structural Tailoring of Advanced Turboprops (STAT) program which was developed to perform numerical optimizations on highly swept propfan blades. The optimization procedure seeks to minimize an objective function, defined as either direct operating cost or aeroelastic differences between a blade and its scaled model, by tuning internal and external geometry variables that must satisfy realistic blade design constraints. This report provides a detailed description of the input, optimization procedures, approximate analyses and refined analyses, as well as validation test cases for the STAT program. In addition, conclusions and recommendations are summarized.

A methodology for small scale rural land use mapping in semi-arid developing countries using orbital imagery. Part 5: Experimental and operational techniques of mapping land use

NASA Technical Reports Server (NTRS)

Vangenderen, J. L. (Principal Investigator); Lock, B. F.

1976-01-01

The author has identified the following significant results. Scope of the preprocessing techniques was restricted to standard material from the EROS Data Center accompanied by some enlarging procedures and the use of the diazo process. Investigation has shown that the most appropriate sampling strategy for this study is the stratified random technique. A viable sampling procedure, together with a method for determining minimum number of sample points in order to test results of any interpretation are presented.

Need for Initiatives to Promote Procedural Understanding in Physics among School Teachers

NASA Astrophysics Data System (ADS)

Khaparde, Rajesh B.

2010-07-01

It is believed that there are three essential abilities which a student develops through a set of introductory physics laboratory courses. These abilities include 1) conceptual understanding, 2) experimental skills, and 3) procedural understanding. While the first two are well accepted, the third one is often implicit and goes behind the planning and execution of experimental physics. Procedural understanding has been described by a number of researchers including R. Gott and S. Duggan [1], and R. Roberts [2]. The author in his work [3] has adopted the approach of these researchers and extended it to physics laboratory training at the university level. Procedural understanding is the understanding of a set of ideas or concepts related to the `knowing how' of science and needed to put science into practice. It is the understanding of `concepts of evidence' like variable identification, sample size, variable types, relative scale, range, interval, choice of instruments, repeatability, graph type, etc. It is the thinking behind the doing and is a kind of cognitive understanding in its own right. It has been observed that while school (Grade 1-12) teachers are reasonably prepared to help students with respect to the development of conceptual understanding and experimental skills, a few are aware of the contents, methods and strategies related to the development of procedural understanding. It is felt that school teachers can play a very important role in helping students to develop procedural understanding at an early stage of their education and before students enter university courses. A need was felt to initiate and promote well-planned teacher improvement programmes at various levels of school education, with an objective to develop procedural understanding and understand the strategies of teaching suitable for various regions and learning environments. The author has initiated one such programme in India and will present details of a workshop organized at Mumbai, India.

Experimental evaluation of tool run-out in micro milling

NASA Astrophysics Data System (ADS)

Attanasio, Aldo; Ceretti, Elisabetta

2018-05-01

This paper deals with micro milling cutting process focusing the attention on tool run-out measurement. In fact, among the effects of the scale reduction from macro to micro (i.e., size effects) tool run-out plays an important role. This research is aimed at developing an easy and reliable method to measure tool run-out in micro milling based on experimental tests and an analytical model. From an Industry 4.0 perspective this measuring strategy can be integrated into an adaptive system for controlling cutting forces, with the objective of improving the production quality, the process stability, reducing at the same time the tool wear and the machining costs. The proposed procedure estimates the tool run-out parameters from the tool diameter, the channel width, and the phase angle between the cutting edges. The cutting edge phase measurement is based on the force signal analysis. The developed procedure has been tested on data coming from micro milling experimental tests performed on a Ti6Al4V sample. The results showed that the developed procedure can be successfully used for tool run-out estimation.

Production and characterization of alginate microcapsules produced by a vibrational encapsulation device.

PubMed

Mazzitelli, S; Tosi, A; Balestra, C; Nastruzzi, C; Luca, G; Mancuso, F; Calafiore, R; Calvitti, M

2008-09-01

The optimization, through a Design of Experiments (DoE) approach, of a microencapsulation procedure for isolated neonatal porcine islets (NPI) is described. The applied method is based on the generation of monodisperse droplets by a vibrational nozzle. An alginate/polyornithine encapsulation procedure, developed and validated in our laboratory for almost a decade, was used to embody pancreatic islets. We analyzed different experimental parameters including frequency of vibration, amplitude of vibration, polymer pumping rate, and distance between the nozzle and the gelling bath. We produced calcium-alginate gel microbeads with excellent morphological characteristics as well as a very narrow size distribution. The automatically produced microcapsules did not alter morphology, viability and functional properties of the enveloped NPI. The optimization of this automatic procedure may provide a novel approach to obtain a large number of batches possibly suitable for large scale production of immunoisolated NPI for in vivo cell transplantation procedures in humans.

A new tool for the evaluation of the analytical procedure: Green Analytical Procedure Index.

PubMed

Płotka-Wasylka, J

2018-05-01

A new means for assessing analytical protocols relating to green analytical chemistry attributes has been developed. The new tool, called GAPI (Green Analytical Procedure Index), evaluates the green character of an entire analytical methodology, from sample collection to final determination, and was created using such tools as the National Environmental Methods Index (NEMI) or Analytical Eco-Scale to provide not only general but also qualitative information. In GAPI, a specific symbol with five pentagrams can be used to evaluate and quantify the environmental impact involved in each step of an analytical methodology, mainly from green through yellow to red depicting low, medium to high impact, respectively. The proposed tool was used to evaluate analytical procedures applied in the determination of biogenic amines in wine samples, and polycyclic aromatic hydrocarbon determination by EPA methods. GAPI tool not only provides an immediately perceptible perspective to the user/reader but also offers exhaustive information on evaluated procedures. Copyright © 2018 Elsevier B.V. All rights reserved.

The Multiple-Minima Problem in Protein Folding

NASA Astrophysics Data System (ADS)

Scheraga, Harold A.

1991-10-01

The conformational energy surface of a polypeptide or protein has many local minima, and conventional energy minimization procedures reach only a local minimum (near the starting point of the optimization algorithm) instead of the global minimum (the multiple-minima problem). Several procedures have been developed to surmount this problem, the most promising of which are: (a) build up procedure, (b) optimization of electrostatics, (c) Monte Carlo-plus-energy minimization, (d) electrostatically-driven Monte Carlo, (e) inclusion of distance restraints, (f) adaptive importance-sampling Monte Carlo, (g) relaxation of dimensionality, (h) pattern-recognition, and (i) diffusion equation method. These procedures have been applied to a variety of polypeptide structural problems, and the results of such computations are presented. These include the computation of the structures of open-chain and cyclic peptides, fibrous proteins and globular proteins. Present efforts are being devoted to scaling up these procedures from small polypeptides to proteins, to try to compute the three-dimensional structure of a protein from its amino sequence.

Teacher Beliefs about Implementing Guided-Inquiry Laboratory Experiments for Secondary School Chemistry

ERIC Educational Resources Information Center

Cheung, Derek

2011-01-01

One of the characteristics of teaching chemistry through inquiry is that teachers need to encourage students to design their experimental procedures. Although the benefits of inquiry teaching are well documented in the literature, few teachers implement it in schools. The purpose of this study was to develop a guided-inquiry scale (GIS) to measure…

One Approach to Accountability: Program Assessment by Recent Graduates Using a Two Scaled Instrument.

ERIC Educational Resources Information Center

Rosser, Stephen R.; Denton, Jon J.

The development and documentation of procedures to conduct a comprehensive follow-up survey in addition to the compilation of the perceptions of recent graduates regarding the quality of their preparation for teaching were the goals of this investigation. The sample consisted of 196 1973-74 graduates of teacher preparation programs under the aegis…

Measuring Perceived Procedural Justice and Coercion among Persons with Mental Illness in Police Encounters: The Police Contact Experience Scale

ERIC Educational Resources Information Center

Watson, Amy C.; Angell, Beth; Vidalon, Theresa; Davis, Kristin

2010-01-01

Despite increased recent attention to improving the quality of encounters between police officers and people with serious mental illness, there are no measures available for assessing how consumers perceive their interactions with police officers. Drawing upon conceptual frameworks developed within social psychology, this study reports the…

A Graphical Approach to Evaluating Equating Using Test Characteristic Curves

ERIC Educational Resources Information Center

Wyse, Adam E.; Reckase, Mark D.

2011-01-01

An essential concern in the application of any equating procedure is determining whether tests can be considered equated after the tests have been placed onto a common scale. This article clarifies one equating criterion, the first-order equity property of equating, and develops a new method for evaluating equating that is linked to this…

A Manual for Assessment and Training of Severely Multiply Handicapped Deaf-Blind Students.

ERIC Educational Resources Information Center

Burton, Rosemarie A.; And Others

Intended for teacher use, the manual provides for the assessment and training of severely multiply handicapped deaf-blind students with sections on self help, motor development, and sensory stimulation training. Included for each skill are an individual rating scale for periodic assessments, a task analysis, and an actual teaching procedure. Found…

Experimental procedures characterizing firebrand generation in wildland fires

Treesearch

Mohamad El Houssami; Eric Mueller; Alexander Filkov; Jan C Thomas; Nicholas Skowronski; Michael R Gallagher; Ken Clark; Robert Kremens; Albert Simeoni

2016-01-01

This study aims to develop a series of robust and efficient methodologies, which can be applied to understand and estimate firebrand generation and to evaluate firebrand showers close to a fire front. A field scale high intensity prescribed fire was conducted in the New Jersey Pine Barrens in March 2013. Vegetation was characterised with field and remotely sensed data...

Screening for Psychosocial Distress amongst War-Affected Children: Cross-Cultural Construct Validity of the CPDS

ERIC Educational Resources Information Center

Jordans, M. J. D.; Komproe, I. H.; Tol, W. A.; De Jong, J. T. V. M.

2009-01-01

Background: Large-scale psychosocial interventions in complex emergencies call for a screening procedure to identify individuals at risk. To date there are no screening instruments that are developed within low- and middle-income countries and validated for that purpose. The present study assesses the cross-cultural validity of the brief,…

Meaning-Related and Print-Related Interactions between Preschoolers and Parents during Shared Book Reading and Their Associations with Emergent Literacy Skills

ERIC Educational Resources Information Center

Han, Jisu; Neuharth-Pritchett, Stacey

2015-01-01

This study examined interactions between preschool children and parents during shared book reading by analyzing parental self-report data. Using confirmatory factor analytic procedures and structural equation modeling, this study developed a scale measuring meaning-related and print-related reading interactions and examined their associations with…

Integrated Primary Care Readiness and Behaviors Scale: Development and validation in behavioral health professionals.

PubMed

Blaney, Cerissa L; Redding, Colleen A; Paiva, Andrea L; Rossi, Joseph S; Prochaska, James O; Blissmer, Bryan; Burditt, Caitlin T; Nash, Justin M; Bayley, Keri Dotson

2018-03-01

Although integrated primary care (IPC) is growing, several barriers remain. Better understanding of behavioral health professionals' (BHPs') readiness for and engagement in IPC behaviors could improve IPC research and training. This study developed measures of IPC behaviors and stage of change. The sample included 319 licensed, practicing BHPs with a range of interests and experience with IPC. Sequential measurement development procedures, with split-half cross-validation were conducted. Exploratory principal components analyses (N = 152) and confirmatory factor analyses (N = 167) yielded a 12-item scale with 2 factors: consultation/practice management (CPM) and intervention/knowledge (IK). A higher-order Integrated Primary Care Behavior Scale (IPCBS) model showed good fit to the data, and excellent internal consistencies. The multivariate analysis of variance (MANOVA) on the IPCBS demonstrated significant large-sized differences across stage and behavior groups. The IPCBS demonstrated good psychometric properties and external validation, advancing research, education, and training for IPC practice. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

The development of the Nurse Workplace Scale: self-advocating behaviors and beliefs in the professional workplace.

PubMed

DeMarco, Rosanna; Roberts, Susan Jo; Norris, Anne; McCurry, Mary K

2008-01-01

This project developed and tested the Nurse Workplace Scale (NWS) using data from a random sample of registered nurses in Massachusetts (n = 904). The NWS was adapted from an earlier checklist that measured group behaviors and beliefs in the workplace of a variety of nurses. Nurses have been thought to display non-self-advocating behaviors and beliefs that have contributed to disempowering their contribution in health care systems, but no tool has been available to assist nurse managers or clinical nurse leaders to test outcomes that measure progress toward changing these behaviors. A cross-validation procedure was used to establish the reliability and validity of the NWS to measure behaviors in nurses that are counterproductive in the workplace. Two components, "internalized sexism" and "minimization of self" behaviors, were established. Scores on the scales were shown to vary with the age and practice settings of the nurses. The NWS can be used in professional development settings and nurse workplace intervention studies to measure outcomes congruent with nurse empowerment.

Combining states without scale hierarchies with ordered parton showers

DOE PAGES

Fischer, Nadine; Prestel, Stefan

2017-09-12

Here, we present a parameter-free scheme to combine fixed-order multi-jet results with parton-shower evolution. The scheme produces jet cross sections with leading-order accuracy in the complete phase space of multiple emissions, resumming large logarithms when appropriate, while not arbitrarily enforcing ordering on momentum configurations beyond the reach of the parton-shower evolution equation. This then requires the development of a matrix-element correction scheme for complex phase-spaces including ordering conditions as well as a systematic scale-setting procedure for unordered phase-space points. Our algorithm does not require a merging-scale parameter. We implement the new method in the Vincia framework and compare to LHCmore » data.« less

Development and use of computational techniques in Army Aviation research and development programs for crash resistant helicopter technology

NASA Technical Reports Server (NTRS)

Burrows, Leroy T.

1993-01-01

During the 1960's over 30 full-scale aircraft crash tests were conducted by the Flight Safety Foundation under contract to the Aviation Applied Technology Directorate (AATD) of the U.S. Army Aviation Systems Command (AVSCOM). The purpose of these tests were to conduct crash injury investigations that would provide a basis for the formulation of sound crash resistance design criteria for light fixed-wing and rotary wing aircraft. This resulted in the Crash Survival Design Criteria Designer's Guide which was first published in 1967 and has been revised numerous times, the last being in 1989. Full-scale aircraft crash testing is an expensive way to investigate structural deformations of occupied spaces and to determine the decelerative loadings experienced by occupants in a crash. This gave initial impetus to the U.S. Army to develop analytical methods to predict the dynamic response of aircraft structures in a crash. It was believed that such analytical tools could be very useful in the preliminary design stage of a new helicopter system which is required to demonstrate a level of crash resistance and had to be more cost effective than full-scale crash tests or numerous component design support tests. From an economic point of view, it is more efficient to optimize for the incorporation of crash resistance features early in the design stage. However, during preliminary design it is doubtful if sufficient design details, which influence the exact plastic deformation shape of structural elements, will be available. The availability of simple procedures to predict energy absorption and load-deformation characteristics will allow the designer to initiate valuable cost, weight, and geometry tradeoff studies. The development of these procedures will require some testing of typical specimens. This testing should, as a minimum, verify the validity of proposed procedures for providing pertinent nonlinear load-deformation data. It was hoped that through the use of these analytical models, the designer could optimize aircraft design for crash resistance from both a weight and cost increment standpoint, thus enhancing the acceptance of the design criteria for crash resistance.

[Further development and validation of a clinical auditing procedure for rehabilitation facilities].

PubMed

Meixner, K; Lubenow, B; Brückner, U; Gerdes, N

2006-06-01

Visitations (audits) are considered an instrument of external quality assurance by which the structural and organizational set-up of health facilities can be assessed on site by external experts. The Deutsche Rentenversicherung Bund (including the former Bundesversicherungsanstalt für Angestellte, BfA, the statutory pension insurance agency for white collar employees) is the largest body responsible for rehabilitation in Germany, and it regularly carries out visitations in the approximately 650 rehab centres it sends its patients to. The project presented in this article aimed at developing a manual with detailed descriptions of the procedures and criteria of the assessment, as well as at checking the inter-rater-reliability of the assessment. The manual was developed in cooperation with experts of the Deutsche Rentenversicherung Bund. It contains a description of the areas to be assessed during a visitation as well as leading questions and criteria for the evaluation of single features. The manual was examined in "test visitations" in 10 centres, each of which was visited by three visitation teams (1 medical and 1 administrative expert) simultaneously. When the resulting 30 assessments were compared, the criterion "overall quality of the centre" (which was assessed on a 10-point scale) showed precise agreement in 47 %, and a deviation by 1 point in 33 % of the cases. Single features assessed on a three-point scale (no improvement needed/improvement recommended/immediate improvement obligatory) resulted in precise agreement in between 80 % ("medical and therapeutic processes") and 86 % ("structural features") of the cases. Two-point scales (condition fulfilled or not fulfilled) showed an agreement between 89 % ("internal quality management") and 97 % ("single structural features"). In order to maintain and further develop this good inter-rater-reliability, the visitors of Deutsche Rentenversicherung Bund are continually trained in applying the visitation manual. In addition to transferring knowledge, these internal training courses are aimed at exchanging views and experience in order to enhance consensus among the visitors. This approach of Deutsche Rentenversicherung Bund could be regarded as "internal quality assurance" of its visitation procedure.

Validity of scale-modeling for gamma-ray attenuation. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Verser, F.A.; Donnert, H.J.

1973-09-01

An adjoint Monte Carlo code (GADJET) was used to calculate the exposure rate in full-scale and model structures located in the center of plane fallout fields (1 Ci/square ft of cobalt-60). Problems were run for a standard detector, an open basement, a basement with two thicknesses of covers, and a blockhouse with two thicknesses of walls. For all configurations investigated, the effects of nonscaling of the ground does not cause any problem and a procedure was developed to minimize the error introduced by non-scaling of the air. If the solid angle subtended by the roof remains unchanged, scaling of roofmore » contamination offers no problems. The lip effect can be significant in structures with the detector below grade. (GRA)« less

Psychometric properties of a four-component Norwegian Organizational Justice Scale.

PubMed

Olsen, Olav Kjellevold; Myrseth, Helga; Eidhamar, Are; Hystad, Sigurd W

2012-04-01

Organizational justice has attracted attention as a predictor of employees' mental and physical health as well as commitment and work outcomes. The lack of a Norwegian translation of an organizational justice scale has precluded its use in Norway. Four dimensions of the organizational justice construct were examined in a Norwegian military context, including facet measures of distributional, interpersonal, and informational justice developed by Colquitt in 2001, in addition to procedural justice developed by Moorman in 1991. Confirmatory factor analyses supported a four-dimensional structure with good internal consistency. Follow-up analyses have suggested that the four dimensions were nested beneath a general, latent organizational justice factor. A positive relationship between organizational justice and self-sacrificial behavior was found, indicating satisfactory construct validity. The results demonstrate that the Norwegian Organizational Justice Scale is a reliable and construct-valid measure of organizational justice in a Norwegian setting.

Contemporary militant extremism: a linguistic approach to scale development.

PubMed

Stankov, Lazar; Higgins, Derrick; Saucier, Gerard; Knežević, Goran

2010-06-01

In this article, the authors describe procedures used in the development of a new scale of militant extremist mindset. A 2-step approach consisted of (a) linguistic analysis of the texts produced by known terrorist organizations and selection of statements from these texts that reflect the mindset of those belonging to these organizations and (b) analyses of the structural properties of the scales based on 132 selected statements. Factor analysis of militant extremist statements with participants (N = 452) from Australia, Serbia, and the United States produced 3 dimensions: (a) justification and advocacy of violence (War factor), (b) violence in the name of God (God factor), and (c) blaming Western nations for the problems in the world today (West factor). We also report the distributions of scores for the 3 subscales, mean differences among the 3 national samples, and correlations with a measure of dogmatism (M. Rokeach, 1956).

Battery Test Manual For Plug-In Hybrid Electric Vehicles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jeffrey R. Belt

2010-09-01

This battery test procedure manual was prepared for the United States Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Program. It is based on technical targets established for energy storage development projects aimed at meeting system level DOE goals for Plug-in Hybrid Electric Vehicles (PHEV). The specific procedures defined in this manual support the performance and life characterization of advanced battery devices under development for PHEV’s. However, it does share some methods described in the previously published battery test manual for power-assist hybrid electric vehicles. Due to the complexity of some of the proceduresmore » and supporting analysis, a revision including some modifications and clarifications of these procedures is expected. As in previous battery and capacitor test manuals, this version of the manual defines testing methods for full-size battery systems, along with provisions for scaling these tests for modules, cells or other subscale level devices.« less

Battery Test Manual For Plug-In Hybrid Electric Vehicles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jeffrey R. Belt

2010-12-01

This battery test procedure manual was prepared for the United States Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Program. It is based on technical targets established for energy storage development projects aimed at meeting system level DOE goals for Plug-in Hybrid Electric Vehicles (PHEV). The specific procedures defined in this manual support the performance and life characterization of advanced battery devices under development for PHEV’s. However, it does share some methods described in the previously published battery test manual for power-assist hybrid electric vehicles. Due to the complexity of some of the proceduresmore » and supporting analysis, a revision including some modifications and clarifications of these procedures is expected. As in previous battery and capacitor test manuals, this version of the manual defines testing methods for full-size battery systems, along with provisions for scaling these tests for modules, cells or other subscale level devices.« less

Spatialized Application of Remotely Sensed Data Assimilation Methods for Farmland Drought Monitoring Using Two Different Crop Models

NASA Astrophysics Data System (ADS)

Silvestro, Paolo Cosmo; Casa, Raffaele; Pignatti, Stefano; Castaldi, Fabio; Yang, Hao; Guijun, Yang

2016-08-01

The aim of this work was to develop a tool to evaluate the effect of water stress on yield losses at the farmland and regional scale, by assimilating remotely sensed biophysical variables into crop growth models. Biophysical variables were retrieved from HJ1A, HJ1B and Landsat 8 images, using an algorithm based on the training of artificial neural networks on PROSAIL.For the assimilation, two crop models of differing degree of complexity were used: Aquacrop and SAFY. For Aquacrop, an optimization procedure to reduce the difference between the remotely sensed and simulated CC was developed. For the modified version of SAFY, the assimilation procedure was based on the Ensemble Kalman Filter.These procedures were tested in a spatialized application, by using data collected in the rural area of Yangling (Shaanxi Province) between 2013 and 2015Results were validated by utilizing yield data both from ground measurements and statistical survey.

Ten Steps to Conducting a Large, Multi-Site, Longitudinal Investigation of Language and Reading in Young Children

PubMed Central

Farquharson, Kelly; Murphy, Kimberly A.

2016-01-01

Purpose: This paper describes methodological procedures involving execution of a large-scale, multi-site longitudinal study of language and reading comprehension in young children. Researchers in the Language and Reading Research Consortium (LARRC) developed and implemented these procedures to ensure data integrity across multiple sites, schools, and grades. Specifically, major features of our approach, as well as lessons learned, are summarized in 10 steps essential for successful completion of a large-scale longitudinal investigation in early grades. Method: Over 5 years, children in preschool through third grade were administered a battery of 35 higher- and lower-level language, listening, and reading comprehension measures (RCM). Data were collected from children, their teachers, and their parents/guardians at four sites across the United States. Substantial and rigorous effort was aimed toward maintaining consistency in processes and data management across sites for children, assessors, and staff. Conclusion: With appropriate planning, flexibility, and communication strategies in place, LARRC developed and executed a successful multi-site longitudinal research study that will meet its goal of investigating the contribution and role of language skills in the development of children's listening and reading comprehension. Through dissemination of our design strategies and lessons learned, research teams embarking on similar endeavors can be better equipped to anticipate the challenges. PMID:27064308

Procedure for Determining Turbulence Length Scales Using Hotwire Anemometry

NASA Technical Reports Server (NTRS)

El-Gabry, Lamyaa A.; Thurman, Douglas R.; Poinsatte, Philip E.

2014-01-01

Hotwire anemometers are used to measure instantaneous velocity from which the mean velocity and the velocity fluctuation can be determined. Using a hotwire system, it is possible to deduce not only the velocity components and their fluctuation but to also analyze the energy spectra and from that the turbulence length scales. In this experiment, hotwire anemometry is used to measure the flow field turbulence for an array of film cooling holes. The objective of this paper is to document the procedure that is used to reduce the instantaneous velocity measurements to determine the turbulence length scales using data from the film-cooling experiments to illustrate the procedure.

Equation-of-State Scaling Factors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scannapieco, Anthony J.

2016-06-28

Equation-of-State scaling factors are needed when using a tabular EOS in which the user de ned material isotopic fractions di er from the actual isotopic fractions used by the table. Additionally, if a material is dynamically changing its isotopic structure, then an EOS scaling will again be needed, and will vary in time and location. The procedure that allows use of a table to obtain information about a similar material with average atomic mass Ms and average atomic number Zs is described below. The procedure is exact for a fully ionized ideal gas. However, if the atomic number is replacemore » by the e ective ionization state the procedure can be applied to partially ionized material as well, which extends the applicability of the scaling approximation continuously from low to high temperatures.« less

A Two-Stage Procedure Toward the Efficient Implementation of PANS and Other Hybrid Turbulence Models

NASA Technical Reports Server (NTRS)

Abdol-Hamid, Khaled S.; Girimaji, Sharath S.

2004-01-01

The main objective of this article is to introduce and to show the implementation of a novel two-stage procedure to efficiently estimate the level of scale resolution possible for a given flow on a given grid for Partial Averaged Navier-Stokes (PANS) and other hybrid models. It has been found that the prescribed scale resolution can play a major role in obtaining accurate flow solutions. The first step is to solve the unsteady or steady Reynolds Averaged Navier-Stokes (URANS/RANS) equations. From this preprocessing step, the turbulence length-scale field is obtained. This is then used to compute the characteristic length-scale ratio between the turbulence scale and the grid spacing. Based on this ratio, we can assess the finest scale resolution that a given grid for a given flow can support. Along with other additional criteria, we are able to analytically identify the appropriate hybrid solver resolution for different regions of the flow. This procedure removes the grid dependency issue that affects the results produced by different hybrid procedures in solving unsteady flows. The formulation, implementation methodology, and validation example are presented. We implemented this capability in a production Computational Fluid Dynamics (CFD) code, PAB3D, for the simulation of unsteady flows.

Performance Prediction Relationships for AM2 Airfield Matting Developed from Full-Scale Accelerated Testing and Laboratory Experimentation

DTIC Science & Technology

2018-01-01

work, the prevailing methods used to predict the performance of AM2 were based on the CBR design procedure for flexible pavements using a small number...suitable for design and evaluation frameworks currently used for airfield pavements and matting systems. DISCLAIMER: The contents of this report...methods used to develop the equivalency curves equated the mat-surfaced area to an equivalent thickness of flexible pavement using the CBR design

Habitat Suitability Index Models: Northern Gulf of Mexico brown shrimp and white shrimp

USGS Publications Warehouse

Turner, Robert Eugene; Brody, Michael S.

1983-01-01

A review and synthesis of existing information were used to develop estuarine habitat models for brown shrimp (Penaeus aztecus) and white shrimp (Penaeus setiferus). The models are scaled to produce an index of habitat suitability between 0 (unsuitable habitat) to 1 (optimally suitable habitat) for estuarine areas of the northern Gulf of Mexico. Habitat suitability indexes are designed for use with the habitat evaluation procedures developed by the U.S. Fish and Wildlife Service.

Ideals of patient autonomy in clinical decision making: a study on the development of a scale to assess patients' and physicians' views.

PubMed

Stiggelbout, A M; Molewijk, A C; Otten, W; Timmermans, D R M; van Bockel, J H; Kievit, J

2004-06-01

Evidence based patient choice seems based on a strong liberal individualist interpretation of patient autonomy; however, not all patients are in favour of such an interpretation. The authors wished to assess whether ideals of autonomy in clinical practice are more in accordance with alternative concepts of autonomy from the ethics literature. This paper describes the development of a questionnaire to assess such concepts of autonomy. A questionnaire, based on six moral concepts from the ethics literature, was sent to aneurysm patients and their surgeons. The structure of the questionnaire was assessed by factor analysis, and item reduction was based on reliability. Ninety six patients and 58 surgeons participated. The questionnaire consisted of four scales. Two of the scales reflected the paternalistic and consumerist poles of the liberal individualist model, one scale reflected concepts of Socratic autonomy and of procedural independence, and the fourth scale reflected ideals of risk disclosure. The Ideal Patient Autonomy Scale is a 14 item normative instrument. It is clearly distinct from the generally used psychological preference questionnaires that assess preferences for physician-patient roles.

Ideals of patient autonomy in clinical decision making: a study on the development of a scale to assess patients' and physicians' views

PubMed Central

Stiggelbout, A; Molewijk, A; Otten, W; Timmermans, D; van Bockel, J H; Kievit, J

2004-01-01

Objectives: Evidence based patient choice seems based on a strong liberal individualist interpretation of patient autonomy; however, not all patients are in favour of such an interpretation. The authors wished to assess whether ideals of autonomy in clinical practice are more in accordance with alternative concepts of autonomy from the ethics literature. This paper describes the development of a questionnaire to assess such concepts of autonomy. Methods: A questionnaire, based on six moral concepts from the ethics literature, was sent to aneurysm patients and their surgeons. The structure of the questionnaire was assessed by factor analysis, and item reduction was based on reliability. Results: Ninety six patients and 58 surgeons participated. The questionnaire consisted of four scales. Two of the scales reflected the paternalistic and consumerist poles of the liberal individualist model, one scale reflected concepts of Socratic autonomy and of procedural independence, and the fourth scale reflected ideals of risk disclosure. Discussion: The Ideal Patient Autonomy Scale is a 14 item normative instrument. It is clearly distinct from the generally used psychological preference questionnaires that assess preferences for physician-patient roles. PMID:15173361

Aqueous Two-Phase Systems at Large Scale: Challenges and Opportunities.

PubMed

Torres-Acosta, Mario A; Mayolo-Deloisa, Karla; González-Valdez, José; Rito-Palomares, Marco

2018-06-07

Aqueous two-phase systems (ATPS) have proved to be an efficient and integrative operation to enhance recovery of industrially relevant bioproducts. After ATPS discovery, a variety of works have been published regarding their scaling from 10 to 1000 L. Although ATPS have achieved high recovery and purity yields, there is still a gap between their bench-scale use and potential industrial applications. In this context, this review paper critically analyzes ATPS scale-up strategies to enhance the potential industrial adoption. In particular, large-scale operation considerations, different phase separation procedures, the available optimization techniques (univariate, response surface methodology, and genetic algorithms) to maximize recovery and purity and economic modeling to predict large-scale costs, are discussed. ATPS intensification to increase the amount of sample to process at each system, developing recycling strategies and creating highly efficient predictive models, are still areas of great significance that can be further exploited with the use of high-throughput techniques. Moreover, the development of novel ATPS can maximize their specificity increasing the possibilities for the future industry adoption of ATPS. This review work attempts to present the areas of opportunity to increase ATPS attractiveness at industrial levels. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Evaluating flow cytometer performance with weighted quadratic least squares analysis of LED and multi-level bead data.

PubMed

Parks, David R; El Khettabi, Faysal; Chase, Eric; Hoffman, Robert A; Perfetto, Stephen P; Spidlen, Josef; Wood, James C S; Moore, Wayne A; Brinkman, Ryan R

2017-03-01

We developed a fully automated procedure for analyzing data from LED pulses and multilevel bead sets to evaluate backgrounds and photoelectron scales of cytometer fluorescence channels. The method improves on previous formulations by fitting a full quadratic model with appropriate weighting and by providing standard errors and peak residuals as well as the fitted parameters themselves. Here we describe the details of the methods and procedures involved and present a set of illustrations and test cases that demonstrate the consistency and reliability of the results. The automated analysis and fitting procedure is generally quite successful in providing good estimates of the Spe (statistical photoelectron) scales and backgrounds for all the fluorescence channels on instruments with good linearity. The precision of the results obtained from LED data is almost always better than that from multilevel bead data, but the bead procedure is easy to carry out and provides results good enough for most purposes. Including standard errors on the fitted parameters is important for understanding the uncertainty in the values of interest. The weighted residuals give information about how well the data fits the model, and particularly high residuals indicate bad data points. Known photoelectron scales and measurement channel backgrounds make it possible to estimate the precision of measurements at different signal levels and the effects of compensated spectral overlap on measurement quality. Combining this information with measurements of standard samples carrying dyes of biological interest, we can make accurate comparisons of dye sensitivity among different instruments. Our method is freely available through the R/Bioconductor package flowQB. © 2017 International Society for Advancement of Cytometry. © 2017 International Society for Advancement of Cytometry.

A revisitation of TRIX for trophic status assessment in the light of the European Water Framework Directive: application to Italian coastal waters.

PubMed

Pettine, Maurizio; Casentini, Barbara; Fazi, Stefano; Giovanardi, Franco; Pagnotta, Romano

2007-09-01

The trophic status classification of coastal waters at the European scale requires the availability of harmonised indicators and procedures. The composite trophic status index (TRIX) provides useful metrics for the assessment of the trophic status of coastal waters. It was originally developed for Italian coastal waters and then applied in many European seas (Adriatic, Tyrrhenian, Baltic, Black and Northern seas). The TRIX index does not fulfil the classification procedure suggested by the WFD for two reasons: (a) it is based on an absolute trophic scale without any normalization to type-specific reference conditions; (b) it makes an ex ante aggregation of biological (Chl-a) and physico-chemical (oxygen, nutrients) quality elements, instead of an ex post integration of separate evaluations of biological and subsequent chemical quality elements. A revisitation of the TRIX index in the light of the European Water Framework Directive (WFD, 2000/60/EC) and new TRIX derived tools are presented in this paper. A number of Italian coastal sites were grouped into different types based on a thorough analysis of their hydro-morphological conditions, and type-specific reference sites were selected. Unscaled TRIX values (UNTRIX) for reference and impacted sites have been calculated and two alternative UNTRIX-based classification procedures are discussed. The proposed procedures, to be validated on a broader scale, provide users with simple tools that give an integrated view of nutrient enrichment and its effects on algal biomass (Chl-a) and on oxygen levels. This trophic evaluation along with phytoplankton indicator species and algal blooms contribute to the comprehensive assessment of phytoplankton, one of the biological quality elements in coastal waters.

Validation of the group nuclear safety climate questionnaire.

PubMed

Navarro, M Felisa Latorre; Gracia Lerín, Francisco J; Tomás, Inés; Peiró Silla, José María

2013-09-01

Group safety climate is a leading indicator of safety performance in high reliability organizations. Zohar and Luria (2005) developed a Group Safety Climate scale (ZGSC) and found it to have a single factor. The ZGSC scale was used as a basis in this study with the researchers rewording almost half of the items on this scale, changing the referents from the leader to the group, and trying to validate a two-factor scale. The sample was composed of 566 employees in 50 groups from a Spanish nuclear power plant. Item analysis, reliability, correlations, aggregation indexes and CFA were performed. Results revealed that the construct was shared by each unit, and our reworded Group Safety Climate (GSC) scale showed a one-factor structure and correlated to organizational safety climate, formalized procedures, safety behavior, and time pressure. This validation of the one-factor structure of the Zohar and Luria (2005) scale could strengthen and spread this scale and measure group safety climate more effectively. Copyright © 2013 National Safety Council and Elsevier Ltd. All rights reserved.

Spatial and spectral simulation of LANDSAT images of agricultural areas

NASA Technical Reports Server (NTRS)

Pont, W. F., Jr. (Principal Investigator)

1982-01-01

A LANDSAT scene simulation capability was developed to study the effects of small fields and misregistration on LANDSAT-based crop proportion estimation procedures. The simulation employs a pattern of ground polygons each with a crop ID, planting date, and scale factor. Historical greenness/brightness crop development profiles generate the mean signal values for each polygon. Historical within-field covariances add texture to pixels in each polygon. The planting dates and scale factors create between-field/within-crop variation. Between field and crop variation is achieved by the above and crop profile differences. The LANDSAT point spread function is used to add correlation between nearby pixels. The next effect of the point spread function is to blur the image. Mixed pixels and misregistration are also simulated.

Bioreactor Expansion of Skin-Derived Precursor Schwann Cells.

PubMed

Walsh, Tylor; Biernaskie, Jeff; Midha, Rajiv; Kallos, Michael S

2016-01-01

Scaling up the production of cells in a culture process is a critical step when trying to develop cell-based regenerative therapies. Static cultures often cannot be easily scaled up to clinically relevant cell numbers. Alternatively, bioreactors offer a highly valuable means to develop a clinical-ready process. To culture adherent cells in suspension, such as skin-derived precursor Schwann cells (SKP-SCs), microcarriers need to be used. Microcarriers are small spherical beads suspended within the vessel that allow for higher growth surface area to volume ratio. Here we describe the procedure of combining microcarriers with the controllability of bioreactors to generate higher cell densities in smaller reactor volumes leading to a more efficient and cost-effective cell production for applications in regenerative medicine.

[Cross-cultural adaptation of the Pregnancy and Weight Gain Attitude Scale].

PubMed

Oliboni, Carolina Marques; Galletta, Marco Aurelio Knippel; Francisco, Rossana Pulcineli Vieira; Alvarenga, Marle dos Santos

2014-07-01

To present the cross-cultural adaptation to Brazilian Portuguese language of the Pregnancy and Weight Gain Attitude Scale. This scale was developed in order to verify whether attitude toward thinness affects weight gain during pregnancy and contains statements that express different attitudes of pregnant women regarding their own weight gain. The procedures were: translation, back translation, comprehension evaluation, preparation of a final version, application of the scale to 180 pregnant women (mean age=29.6, gestational age=25.7 weeks) and psychometric analysis. Satisfactory equivalence between the versions and satisfactory internal consistency (Cronbach's alpha 0.7) were detected. The exploratory factor analysis suggested four subscales with 51.4% total variance explained. The scale proved to be valid and can be used in studies with pregnant women in Brazil to assess attitudes toward weight gain and to detect and prevent dysfunctional behaviors during pregnancy.

Utilization of Neurophysiological Protocols to Characterize Soldier Response to Irritant Gases. Phase 1.

DTIC Science & Technology

1990-02-15

electrical activity mapping procedures. It is necessary to employ approximately 20 electrodes to conduct full- scale brain mapping procedures, using a...animal groups, likewise, showed no observable differences in the animal’s exploratory behavior, nuzzle response, lid-corneal and ear reflexes, pain ...SPECIFICATIONS FOR THE ENVIRONICS SERIES 100 GAS STANDARDS GENERATOR Accuracy of Flow 0.15 % of Full Scale Linearity 0.15 % of Full Scale Repeatability 0.10

Research on solar pumped liquid lasers. Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cox, J.D.; Kurzweg, U.H.; Weinstein, N.H.

1985-04-01

A solar pumped liquid laser that can be scaled up to high power (10 mW CW) for space applications was developed. Liquid lasers have the advantage over gases in that they provide much higher lasant densities and thus high-power densities. Liquids also have advantages over solids in that they have much higher damage thresholds and are much cheaper to produce for large scale applications. Among the liquid laser media that are potential candidates for solar pumping, the POC13: Nd sup 3+:ZrCl4 liquid was chosen for its high intrinsic efficiency and its relatively good stability against decomposition due to protic contamination.more » The development of a manufacturing procedure and performance testing of the laser liquid and the development of an inexpensive large solar concentrator to pump the laser are examined.« less

Projection-Based Reduced Order Modeling for Spacecraft Thermal Analysis

NASA Technical Reports Server (NTRS)

Qian, Jing; Wang, Yi; Song, Hongjun; Pant, Kapil; Peabody, Hume; Ku, Jentung; Butler, Charles D.

2015-01-01

This paper presents a mathematically rigorous, subspace projection-based reduced order modeling (ROM) methodology and an integrated framework to automatically generate reduced order models for spacecraft thermal analysis. Two key steps in the reduced order modeling procedure are described: (1) the acquisition of a full-scale spacecraft model in the ordinary differential equation (ODE) and differential algebraic equation (DAE) form to resolve its dynamic thermal behavior; and (2) the ROM to markedly reduce the dimension of the full-scale model. Specifically, proper orthogonal decomposition (POD) in conjunction with discrete empirical interpolation method (DEIM) and trajectory piece-wise linear (TPWL) methods are developed to address the strong nonlinear thermal effects due to coupled conductive and radiative heat transfer in the spacecraft environment. Case studies using NASA-relevant satellite models are undertaken to verify the capability and to assess the computational performance of the ROM technique in terms of speed-up and error relative to the full-scale model. ROM exhibits excellent agreement in spatiotemporal thermal profiles (<0.5% relative error in pertinent time scales) along with salient computational acceleration (up to two orders of magnitude speed-up) over the full-scale analysis. These findings establish the feasibility of ROM to perform rational and computationally affordable thermal analysis, develop reliable thermal control strategies for spacecraft, and greatly reduce the development cycle times and costs.

The development of fears of compassion scale Japanese version

PubMed Central

Asano, Kenichi; Tsuchiya, Masao; Ishimura, Ikuo; Lin, Shuzhen; Matsumoto, Yuki; Miyata, Haruko; Kotera, Yasuhiro; Shimizu, Eiji; Gilbert, Paul

2017-01-01

Objectives Cultivation of compassion is a useful way to treat mental problems, but some individuals show resistance. Fears of compassion can be an obstacle for clinicians when providing psychotherapy, and for clients when engaging in interpersonal relationships. Despite its importance, a Japanese version of fears of compassion scales (for others, from others, and for self) has not yet been developed. This study developed a Japanese version of the Fears of Compassion Scales and tested its reliability and validity. Design This study used a cross-sectional design, and a self-report procedure for collecting data. Methods A total of 485 students (121 males and 364 females) answered self-report questionnaires, including the draft Fears of Compassion Scales—Japanese version. Results There were distinctive factor structures for fear of compassion from others, and for self. The fear of compassion from others scale consisted of concern about compassion from others and avoidance of compassion from others. All scales had good internal consistency, test-retest reliability, face validity, and construct validity. Discrimination and difficulty were also calculated. Conclusions These results indicate that the Fears of Compassion Scales—Japanese version is a well-constructed and useful measure to assess fears of compassion and the existence of cultural differences in fears of compassion. PMID:29023461

Teacher Ratings of Young Children with and without ADHD: Construct Validity of Two Child Behavior Rating Scales

ERIC Educational Resources Information Center

Carney, Amy G.; Merrell, Kenneth W.

2005-01-01

This study examined teachers' behavioral ratings of young children (ages 5 and 6) with and without attention-deficit/hyperactivity disorder (ADHD). A study group consisting of 30 children with formal diagnoses of ADHD and a comparison group of 30 children without ADHD were developed using randomized matching procedures. Teachers of these children…

Comparison of rotation algorithms for digital images

NASA Astrophysics Data System (ADS)

Starovoitov, Valery V.; Samal, Dmitry

1999-09-01

The paper presents a comparative study of several algorithms developed for digital image rotation. No losing generality we studied gray scale images. We have tested methods preserving gray values of the original images, performing some interpolation and two procedures implemented into the Corel Photo-paint and Adobe Photoshop soft packages. By the similar way methods for rotation of color images may be evaluated also.

Using Assessment to Drive the Reform of Schooling: Time to Stop Pursuing the Chimera?

ERIC Educational Resources Information Center

Torrance, Harry

2011-01-01

Internationally, over the last 20-30 years, changing the procedures and processes of assessment has come to be seen, by many educators as well as policy-makers, as a way to frame the curriculum and drive the reform of schooling. Such developments have often been manifested in large scale, high stakes testing programmes. At the same time…

Do Two or More Multicomponent Instruments Measure the Same Construct? Testing Construct Congruence Using Latent Variable Modeling

ERIC Educational Resources Information Center

Raykov, Tenko; Marcoulides, George A.; Tong, Bing

2016-01-01

A latent variable modeling procedure is discussed that can be used to test if two or more homogeneous multicomponent instruments with distinct components are measuring the same underlying construct. The method is widely applicable in scale construction and development research and can also be of special interest in construct validation studies.…

A Multi-Scale Approach to Assess and Restore Ecosystems in a Watershed Context

DTIC Science & Technology

2013-09-01

Laguna Formation .. Mehrten Formation .. Metamorphic Rocks , Undifferentiated .. Modesto Formation. Upper Unit c=J North Merced Gravel .. Riverbank...distribution is unlimited. The US Army Engineer Research and Development Center (ERDC) solves the nation’s toughest engineering and environmental...watershed assessment procedure that can be used to evaluate existing ecological conditions as well as proposed changes. The approach employs indicators

Registration procedure for spatial correlation of physical energy deposition of particle irradiation and cellular response utilizing cell-fluorescent ion track hybrid detectors

NASA Astrophysics Data System (ADS)

Niklas, M.; Zimmermann, F.; Schlegel, J.; Schwager, C.; Debus, J.; Jäkel, O.; Abdollahi, A.; Greilich, S.

2016-09-01

The hybrid technology cell-fluorescent ion track hybrid detector (Cell-Fit-HD) enables the investigation of radiation-related cellular events along single ion tracks on the subcellular scale in clinical ion beams. The Cell-Fit-HD comprises a fluorescent nuclear track detector (FNTD, the physical compartment), a device for individual particle detection and a substrate for viable cell-coating, i.e. the biological compartment. To date both compartments have been imaged sequentially in situ by confocal laser scanning microscopy (CLSM). This is yet in conflict with a functional read-out of the Cell-Fit-HD utilizing a fast live-cell imaging of the biological compartment with low phototoxicity on greater time scales. The read-out of the biological from the physical compartment was uncoupled. A read-out procedure was developed to image the cell layer by conventional widefield microscopy whereas the FNTD was imaged by CLSM. Point mapping registration of the confocal and widefield imaging data was performed. Non-fluorescent crystal defects (spinels) visible in both read-outs were used as control point pairs. The accuracy achieved was on the sub-µm scale. The read-out procedure by widefield microscopy does not impair the unique ability of spatial correlation by the Cell-Fit-HD. The uncoupling will enlarge the application potential of the hybrid technology significantly. The registration allows for an ultimate correlation of microscopic physical beam parameters and cell kinetics on greater time scales. The method reported herein will be instrumental for the introduction of a novel generation of compact detectors facilitating biodosimetric research towards high-throughput analysis.

Ultrasonic Doppler blood flow meter for extracorporeal circulation

NASA Astrophysics Data System (ADS)

Dantas, Ricardo G.; Costa, Eduardo T.; Maia, Joaquim M.; Nantes Button, Vera L. d. S.

2000-04-01

In cardiac surgeries it is frequently necessary to carry out interventions in internal heart structures, and where the blood circulation and oxygenation are made by artificial ways, out of the patient's body, in a procedure known as extracorporeal circulation (EC). During this procedure, one of the most important parameters, and that demands constant monitoring, is the blood flow. In this work, an ultrasonic pulsed Doppler blood flowmeter, to be used in an extracorporeal circulation system, was developed. It was used a 2 MHz ultrasonic transducer, measuring flows from 0 to 5 liters/min, coupled externally to the EC arterial line destined to adults perfusion (diameter of 9.53 mm). The experimental results using the developed flowmeter indicated a maximum deviation of 3.5% of full scale, while the blood flow estimator based in the rotation speed of the peristaltic pump presented deviations greater than 20% of full scale. This ultrasonic flowmeter supplies the results in a continuous and trustworthy way, and it does not present the limitations found in those flowmeters based in other transduction methods. Moreover, due to the fact of not being in contact with the blood, it is not disposable and it does not need sterilization, reducing operational costs and facilitating its use.

Lab-on-a-chip modules for detection of highly pathogenic bacteria: from sample preparation to detection

NASA Astrophysics Data System (ADS)

Julich, S.; Kopinč, R.; Hlawatsch, N.; Moche, C.; Lapanje, A.; Gärtner, C.; Tomaso, H.

2014-05-01

Lab-on-a-chip systems are innovative tools for the detection and identification of microbial pathogens in human and veterinary medicine. The major advantages are small sample volume and a compact design. Several fluidic modules have been developed to transform analytical procedures into miniaturized scale including sampling, sample preparation, target enrichment, and detection procedures. We present evaluation data for single modules that will be integrated in a chip system for the detection of pathogens. A microfluidic chip for purification of nucleic acids was established for cell lysis using magnetic beads. This assay was evaluated with spiked environmental aerosol and swab samples. Bacillus thuringiensis was used as simulant for Bacillus anthracis, which is closely related but non-pathogenic for humans. Stationary PCR and a flow-through PCR chip module were investigated for specific detection of six highly pathogenic bacteria. The conventional PCR assays could be transferred into miniaturized scale using the same temperature/time profile. We could demonstrate that the microfluidic chip modules are suitable for the respective purposes and are promising tools for the detection of bacterial pathogens. Future developments will focus on the integration of these separate modules to an entire lab-on-a-chip system.

Attachment and caregiver-infant interaction: a review of observational-assessment tools.

PubMed

Tryphonopoulos, Panagiota D; Letourneau, Nicole; Ditommaso, Enrico

2014-01-01

The relationship between maternal-infant interaction and attachment quality to infant developmental outcomes has long been established. As children mature, problems stemming from troubled caregiver-infant relations may result in referral to mental health or child protection services. The accurate and appropriate assessment of attachment is critical for early recognition of problematic relations and for informing suitable treatment modalities. Evaluating the quality of attachment poses a challenge for researchers and clinicians seeking to explore the association between infant development and the quality of early caregiving experiences. Although providing a definitive answer to the question of which of these assessment procedures is the single universal standard for measuring attachment quantity is beyond the scope of this article, readers will be provided with a description and comparison of strengths and limitations of the most commonly used measures of attachment, including the Strange Situation Procedure (M.D.S. Ainsworth, M.C. Blehar, E. Waters, & S. Wall, 1978), Attachment Q-Sort (E. Waters & K.E. Deane, 1985), Toddler Attachment Sort (TAS-45; J. Kirkland, D. Bimler, A. Drawneek, M. McKim, & A. Scholmerich, 2004), CARE-Index (P. Crittenden, 1985), Atypical Maternal Behavior Instrument for Assessment and Classification (AMBIANCE; E. Bronfman, E. Parsons, & K. Lyons-Ruth, 1999), Massie-Campbell Scale of Mother-Infant Attachment Indicators During Stress Scale (Attachment During Stress Scale; H.N. Massie & B.K. Campbell, 1983), and the Risky Situation Procedure (D. Paquette & M. Bigras, 2010). © 2014 Michigan Association for Infant Mental Health.

Structural tailoring of advanced turboprops

NASA Technical Reports Server (NTRS)

Brown, K. W.; Hopkins, Dale A.

1988-01-01

The Structural Tailoring of Advanced Turboprops (STAT) computer program was developed to perform numerical optimization on highly swept propfan blades. The optimization procedure seeks to minimize an objective function defined as either: (1) direct operating cost of full scale blade or, (2) aeroelastic differences between a blade and its scaled model, by tuning internal and external geometry variables that must satisfy realistic blade design constraints. The STAT analysis system includes an aerodynamic efficiency evaluation, a finite element stress and vibration analysis, an acoustic analysis, a flutter analysis, and a once-per-revolution forced response life prediction capability. STAT includes all relevant propfan design constraints.

Multi-Functional Composite Fatigue

NASA Technical Reports Server (NTRS)

Minnetyan, Levon; Chamis, Christos C.

2008-01-01

Damage and fracture of composites subjected to monotonically increasing static, tension-tension cyclic, pressurization, and flexural cyclic loading are evaluated via a recently developed composite mechanics code that allows the user to focus on composite response at infinitely small scales. Constituent material properties, stress and strain limits are scaled up to the laminate level to evaluate the overall damage and durability. Results show the number of cycles to failure at different temperatures. A procedure is outlined for use of computational simulation data in the assessment of damage tolerance, determination of sensitive parameters affecting fracture, and interpretation of results with insight for design decisions.

Refurbishment of SRB aluminum components by walnut hull blast removal of protective coatings

NASA Technical Reports Server (NTRS)

Colberg, W. R.; Gordon, G. H.; Jackson, C. H.

1982-01-01

A test program was conducted to develop, optimize, and scale up an abrasive blasting procedure was developed for refurbishment of specific SRB components: aft skirt, forward skirt, frustrum, and painted piece parts. Test specimens utilizing 2219 T87 aluminum substrate of varying thicknesses were prepared and blasted at progressively increasing pressures with selected abrasives. Specimens were analyzed for material response. The optimum blasting parameters were determined on panel specimens and verified on a large cylindrical integrated test bed.

Habitat Suitability Index Models: Laughing gull

USGS Publications Warehouse

Zale, Alexander V.; Mulholland, Rosemarie

1985-01-01

A review and synthesis of existing information were used to develop a habitat model for laughing gull (Larus atricilla). The model is scaled to produce an index of habitat suitability between 0 (unsuitable habitat) and 1.0 (optimally suitable habitat) for areas along the Gulf of Mexico coast. Habitat suitability indices are designed for use with the Habitat Evaluation Procedures previously developed by the U.S. Fish and Wildlife Service. Guidelines for application of the model and techniques for measuring model variables are described.

Scaled-up production of poacic acid, a plant-derived antifungal agent

DOE PAGES

Yue, Fengxia; Gao, Ruili; Piotrowski, Jeff S.; ...

2017-09-01

Poacic acid, a decarboxylated product from 8–5-diferulic acid that is commonly found in monocot lignocellulosic hydrolysates, has been identified as a natural antifungal agent against economically significant fungi and oomycete plant pathogens. Starting from commercially available or monocot-derivable ferulic acid, a three-step synthetic procedure has been developed for the production of poacic acid needed for field testing in a controlled agricultural setting. First, ferulic acid was esterified to produce ethyl ferulate in 92% yield. Second, peroxidase-catalyzed free radical dehydrodimerization of ethyl ferulate produced crude diferulates, mainly 8–5-diferulate, in 91% yield. Finally, crystalline poacic acid was obtained in 25% yield viamore » alkaline hydrolysis of the crude diferulates after purification by flash-column chromatography. Thus, this new procedure offers two key improvements relevant to large-scale production: 1) bubbling air through the reaction mixture in the second step to remove acetone greatly improves the recovery efficiency of the crude diferulates; and 2) telescoping minor impurities directly into the alkaline hydrolysis step eliminates the need for additional column purifications, thus reducing the overall cost of production and removing a major impediment to process scale-up.« less

Scaled-up production of poacic acid, a plant-derived antifungal agent

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yue, Fengxia; Gao, Ruili; Piotrowski, Jeff S.

Poacic acid, a decarboxylated product from 8–5-diferulic acid that is commonly found in monocot lignocellulosic hydrolysates, has been identified as a natural antifungal agent against economically significant fungi and oomycete plant pathogens. Starting from commercially available or monocot-derivable ferulic acid, a three-step synthetic procedure has been developed for the production of poacic acid needed for field testing in a controlled agricultural setting. First, ferulic acid was esterified to produce ethyl ferulate in 92% yield. Second, peroxidase-catalyzed free radical dehydrodimerization of ethyl ferulate produced crude diferulates, mainly 8–5-diferulate, in 91% yield. Finally, crystalline poacic acid was obtained in 25% yield viamore » alkaline hydrolysis of the crude diferulates after purification by flash-column chromatography. Thus, this new procedure offers two key improvements relevant to large-scale production: 1) bubbling air through the reaction mixture in the second step to remove acetone greatly improves the recovery efficiency of the crude diferulates; and 2) telescoping minor impurities directly into the alkaline hydrolysis step eliminates the need for additional column purifications, thus reducing the overall cost of production and removing a major impediment to process scale-up.« less

Clinimetrics and clinical psychometrics: macro- and micro-analysis.

PubMed

Tomba, Elena; Bech, Per

2012-01-01

Clinimetrics was introduced three decades ago to specify the domain of clinical markers in clinical medicine (indexes or rating scales). In this perspective, clinical validity is the platform for selecting the various indexes or rating scales (macro-analysis). Psychometric validation of these indexes or rating scales is the measuring aspect (micro-analysis). Clinical judgment analysis by experienced psychiatrists is included in the macro-analysis and the item response theory models are especially preferred in the micro-analysis when using the total score as a sufficient statistic. Clinical assessment tools covering severity of illness scales, prognostic measures, issues of co-morbidity, longitudinal assessments, recovery, stressors, lifestyle, psychological well-being, and illness behavior have been identified. The constructive dialogue in clinimetrics between clinical judgment and psychometric validation procedures is outlined for generating developments of clinical practice in psychiatry. Copyright © 2012 S. Karger AG, Basel.

Parametric Study of the Effect of Membrane Tension on Sunshield Dynamics

NASA Technical Reports Server (NTRS)

Ross, Brian; Johnston, John D.; Smith, James

2002-01-01

The NGST sunshield is a lightweight, flexible structure consisting of pretensioned membranes supported by deployable booms. The structural dynamic behavior of the sunshield must be well understood in order to predict its influence on observatory performance. A 1/10th scale model of the sunshield has been developed for ground testing to provide data to validate modeling techniques for thin film membrane structures. The validated models can then be used to predict the behaviour of the full scale sunshield. This paper summarizes the most recent tests performed on the 1/10th scale sunshield to study the effect of membrane preload on sunshield dynamics. Topics to be covered include the test setup, procedures, and a summary of results.

The art and science of rotary wing data correlation

NASA Technical Reports Server (NTRS)

Drees, J. M.

1976-01-01

This paper presents an overview of the correlation of helicopter rotor performance and loads data from various tests and analyses. Information is included from U.S. Army-sponsored tests conducted by Bell Helicopter Company for free-flight full-scale tests in the NASA-Ames 40 x 80 wind tunnel, one-fifth scale tests in the NASA-Langley Transonic Dynamics Tunnel, and small-scale tests of a rotor in air. These test data are compared with each other, where appropriate, and with calculated results. Typical examples illustrate the state of the art for correlation and indicate anomalies encountered. It is concluded that a procedure using theoretical analyses to aid in interpretation and evaluation of test results is essential to developing a science of correlation.

Next generation initiation techniques

NASA Technical Reports Server (NTRS)

Warner, Tom; Derber, John; Zupanski, Milija; Cohn, Steve; Verlinde, Hans

1993-01-01

Four-dimensional data assimilation strategies can generally be classified as either current or next generation, depending upon whether they are used operationally or not. Current-generation data-assimilation techniques are those that are presently used routinely in operational-forecasting or research applications. They can be classified into the following categories: intermittent assimilation, Newtonian relaxation, and physical initialization. It should be noted that these techniques are the subject of continued research, and their improvement will parallel the development of next generation techniques described by the other speakers. Next generation assimilation techniques are those that are under development but are not yet used operationally. Most of these procedures are derived from control theory or variational methods and primarily represent continuous assimilation approaches, in which the data and model dynamics are 'fitted' to each other in an optimal way. Another 'next generation' category is the initialization of convective-scale models. Intermittent assimilation systems use an objective analysis to combine all observations within a time window that is centered on the analysis time. Continuous first-generation assimilation systems are usually based on the Newtonian-relaxation or 'nudging' techniques. Physical initialization procedures generally involve the use of standard or nonstandard data to force some physical process in the model during an assimilation period. Under the topic of next-generation assimilation techniques, variational approaches are currently being actively developed. Variational approaches seek to minimize a cost or penalty function which measures a model's fit to observations, background fields and other imposed constraints. Alternatively, the Kalman filter technique, which is also under investigation as a data assimilation procedure for numerical weather prediction, can yield acceptable initial conditions for mesoscale models. The third kind of next-generation technique involves strategies to initialize convective scale (non-hydrostatic) models.

Development and evaluation of a simulation-based continuing medical education course: beyond lectures and credit hours.

PubMed

Pugh, Carla M; Arafat, Fahd O; Kwan, Calvin; Cohen, Elaine R; Kurashima, Yo; Vassiliou, Melina C; Fried, Gerald M

2015-10-01

The aim of our study was to modify our previously developed laparoscopic ventral hernia (LVH) simulator to increase difficulty and then reassess validity and feasibility for using the simulator in a newly developed simulation-based continuing medical education course. Participants (N = 30) were practicing surgeons who signed up for a hands-on postgraduate laparoscopic hernia course. An LVH simulator, with prior validity evidence, was modified for the course to increase difficulty. Participants completed 1 of the 3 variations in hernia anatomy: incarcerated omentum, incarcerated bowel, and diffuse adhesions. During the procedure, course faculty and peer observers rated surgeon performance using Global Operative Assessment of Laparoscopic Skills-Incisional Hernia and Global Operative Assessment of Laparoscopic Skills rating scales with prior validity evidence. Rating scale reliability was reassessed for internal consistency. Peer and faculty raters' scores were compared. In addition, quality and completeness of the hernia repairs were rated. Internal consistency on the general skills performance (peer α = .96, faculty α = .94) and procedure-specific performance (peer α = .91, faculty α = .88) scores were high. Peers were more lenient than faculty raters on all LVH items in both the procedure-specific skills and general skills ratings. Overall, participants scored poorly on the quality and completeness of their hernia repairs (mean = 3.90/16, standard deviation = 2.72), suggesting a mismatch between course attendees and hernia difficulty and identifying a learning need. Simulation-based continuing medical education courses provide hands-on experiences that can positively affect clinical practice. Although our data appear to show a significant mismatch between clinical skill and simulator difficulty, these findings also underscore significant learning needs in the surgical community. Copyright © 2015 Elsevier Inc. All rights reserved.

An Exploratory Investigation of the Factor Structure of the Reynolds Intellectual Assessment Scales (RIAS)

ERIC Educational Resources Information Center

Dombrowski, Stefan C.; Watkins, Marley W.; Brogan, Michael J.

2009-01-01

This study investigated the factor structure of the Reynolds Intellectual Assessment Scales (RIAS) using rigorous exploratory factor analytic and factor extraction procedures. The results of this study indicate that the RIAS is a single factor test. Despite these results, higher order factor analysis using the Schmid-Leiman procedure indicates…

Justifying scale type for a latent variable: Formative or reflective?

NASA Astrophysics Data System (ADS)

Liu, Hao; Bahron, Arsiah; Bagul, Awangku Hassanal Bahar Pengiran

2015-12-01

The study attempted to explore the possibilities to create a procedure at the experimental level to double confirm whether manifest variables scale type is formative or reflective. Now, the criteria of making such a decision are heavily depended on researchers' judgment at the conceptual and operational level. The study created an experimental procedure that seems could double confirm the decisions from the conceptual and operational level judgments. The experimental procedure includes the following tests, Variance Inflation Factor (VIF), Tolerance (TOL), Ridge Regression, Cronbach's alpha, Dillon-Goldstein's rho, and first and second eigenvalue. The procedure considers manifest variables' both multicollinearity and consistency. As the result, the procedure received the same judgment with the carefully established decision making at the concept and operational level.

A Reaction Time Experiment on Adult Attachment: The Development of a Measure for Neurophysiological Settings

PubMed Central

Wichmann, Theresia; Buchheim, Anna; Menning, Hans; Schenk, Ingmar; George, Carol; Pokorny, Dan

2016-01-01

In the last few decades, there has been an increase of experimental research on automatic unconscious processes concerning the evaluation of the self and others. Previous research investigated implicit aspects of romantic attachment using self-report measures as explicit instruments for assessing attachment style. There is a lack of experimental procedures feasible for neurobiological settings. We developed a reaction time (RT) experiment using a narrative attachment measure with an implicit nature and were interested to capture automatic processes, when the individuals’ attachment system is activated. We aimed to combine attachment methodology with knowledge from implicit measures by using a decision RT paradigm. This should serve as a means to capture implicit aspects of attachment. This experiment evaluated participants’ response to prototypic attachment sentences in association with their own attachment classification, measured with the Adult Attachment Projective Picture System (AAP). First the AAP was administered as the standardized interview procedure to 30 healthy participants, which were classified into a secure or insecure group. In the following experimental session, both experimenter and participants were blind with respect to classifications. One hundred twenty eight prototypically secure or insecure sentences related to the eight pictures of the AAP were presented to the participants. Their response and RTs were recorded. Based on the response (accept, reject) a continuous security scale was defined. Both the AAP classification and security scale were related to the RTs. Differentiated study hypotheses were confirmed for insecure sentences, which were accepted faster by participants from the insecure attachment group (or with lower security scale), and rejected faster by participants from secure attachment group (or with higher security scale). The elaborating unconscious processes were more activated by insecure sentences with potential attachment conflicts. The introduced paradigm is able to contribute to an experimental approach in attachment research. The RT analysis with the narrative procedure might be of interest for a broader variety of questions in experimental and neurophysiological settings to capture unconscious processes in association with internal working models of attachment. An electrophysiological model based on preliminary research is proposed for assessing the preconscious neuronal network related to secure or insecure attachment representations. PMID:27853426

Estimating Soil Organic Carbon stocks and uncertainties at the regional scale following a legacy sampling strategy - a case study from southern Belgium

NASA Astrophysics Data System (ADS)

Chartin, Caroline; Krüger, Inken; Goidts, Esther; Carnol, Monique; van Wesemael, Bas

2017-04-01

The quantification and the spatialisation of reliable SOC stocks (Mg C ha-1) and total stock (Tg C) baselines and associated uncertainties are fundamental to detect the gains or losses in SOC, and to locate sensitive areas with low SOC levels. Here, we aim to both quantify and spatialize SOC stocks at regional scale (southern Belgium) based on data from one non-design-based nor model-based sampling scheme. To this end, we developed a computation procedure based on Digital Soil Mapping techniques and stochastic simulations (Monte-Carlo) allowing the estimation of multiple (here, 10,000) independent spatialized datasets. The computation of the prediction uncertainty accounts for the errors associated to the both estimations of i) SOC stock at the pixel-related area scale and ii) parameters of the spatial model. Based on these 10,000 individuals, median SOC stocks and 90% prediction intervals were computed for each pixel, as well as total SOC stocks and their 90% prediction intervals for selected sub-areas and for the entire study area. Hence, a Generalised Additive Model (GAM) explaining 69.3 % of the SOC stock variance was calibrated and then validated (R2 = 0.64). The model overestimated low SOC stock (below 50 Mg C ha-1) and underestimated high SOC stock (especially those above 100 Mg C kg-1). A positive gradient of SOC stock occurred from the northwest to the center of Wallonia with a slight decrease on the southernmost part, correlating to the evolution of precipitation and temperature (along with elevation) and dominant land use. At the catchment scale higher SOC stocks were predicted on valley bottoms, especially for poorly drained soils under grassland. Mean predicted SOC stocks for cropland and grassland in Wallonia were of 26.58 Tg C (SD 1.52) and 43.30 Tg C (2.93), respectively. The procedure developed here allowed to predict realistic spatial patterns of SOC stocks all over agricultural lands of southern Belgium and to produce reliable statistics of total SOC stocks for each of the 20 combinations of land use / agricultural regions of Wallonia. This procedure appears useful to produce soil maps as policy tools in conducting sustainable management at regional and national scales, and to compute statistics which comply with specific requirements of reporting activities.

Large-scale purification and characterization of recombinant human stem cell factor in Escherichia coli.

PubMed

Chen, Liang-Hua; Cai, Feng; Zhang, Dan-Ju; Zhang, Li; Zhu, Peng; Gao, Shun

2017-07-01

The pharmacological importance of recombinant human stem cell factor (rhSCF) has increased the demand to establish effective and large-scale production and purification processes. A good source of bioactive recombinant protein with capability of being scaled-up without losing activity has always been a challenge. The objectives of the study were the rapid and efficient pilot-scale expression and purification of rhSCF. The gene encoding stem cell factor (SCF) was cloned into pBV220 and transformed into Escherichia coli. The recombinant SCF was expressed and isolated using a procedure consisting of isolation of inclusion bodies (IBs), denaturation, and refolding followed by chromatographic steps toward purification. The yield of rhSCF reached 835.6 g/20 L, and the expression levels of rhSCF were about 33.9% of the total E. coli protein content. rhSCF was purified by isolation of IBs, denaturation, and refolding, followed by SP-Sepharose chromatography, Source 30 reversed-phase chromatography, and Q-Sepharose chromatography. This procedure was developed to isolate 5.5 g of rhSCF (99.5% purity) with specific activity at 0.96 × 10 6  IU/mg, endotoxin levels of pyrogen at 1.0 EU/mg, and bacterial DNA at 10 ng/mg. Pilot-scale fermentations and purifications were set up for the production of rhSCF that can be upscaled for industry. © 2016 International Union of Biochemistry and Molecular Biology, Inc.

Schinus terebinthifolius scale-up countercurrent chromatography (Part I): High performance countercurrent chromatography fractionation of triterpene acids with off-line detection using atmospheric pressure chemical ionization mass spectrometry.

PubMed

Vieira, Mariana Neves; Costa, Fernanda das Neves; Leitão, Gilda Guimarães; Garrard, Ian; Hewitson, Peter; Ignatova, Svetlana; Winterhalter, Peter; Jerz, Gerold

2015-04-10

'Countercurrent chromatography' (CCC) is an ideal technique for the recovery, purification and isolation of bioactive natural products, due to the liquid nature of the stationary phase, process predictability and the possibility of scale-up from analytical to preparative scale. In this work, a method developed for the fractionation of Schinus terebinthifolius Raddi berries dichloromethane extract was thoroughly optimized to achieve maximal throughput with minimal solvent and time consumption per gram of processed crude extract, using analytical, semi-preparative and preparative 'high performance countercurrent chromatography' (HPCCC) instruments. The method using the biphasic solvent system composed of n-heptane-ethyl acetate-methanol-water (6:1:6:1, v/v/v/v) was volumetrically scaled up to increase sample throughput up to 120 times, while maintaining separation efficiency and time. As a fast and specific detection alternative, the fractions collected from the CCC-separations were injected to an 'atmospheric pressure chemical ionization mass-spectrometer' (APCI-MS/MS) and reconstituted molecular weight MS-chromatograms of the APCI-ionizable compounds from S. terebinthifolius were obtained. This procedure led to the direct isolation of tirucallane type triterpenes such as masticadienonic and 3β-masticadienolic acids. Also oleanonic and moronic acids have been identified for the first time in the species. In summary, this approach can be used for other CCC scale-up processes, enabling MS-target-guided isolation procedures. Copyright © 2015 Elsevier B.V. All rights reserved.

Characterization of iron carbonate scales developed under carbon dioxide corrosion conditions

NASA Astrophysics Data System (ADS)

de Moraes, Flavio Dias

1999-11-01

Carbon steel CO2 corrosion is a common and very serious problem in the oil industry. It often results in severe damage to pipes and equipment. Besides controlling direct costs associated with loss of production and replacement or repair to the equipment damaged by corrosion, life and environmental safety must be protected with the thorough study of this type of corrosion. For a given type of steel, the CO2 corrosion rates are strongly influenced by many mechanical and environmental factors, such as flow velocity, temperature, gas-liquid ratio, oil-water ratio, CO2 partial pressure, and the chemical composition of the produced water. Under specific conditions, a corrosion product, the iron carbonate (FeCO3), can deposit over the corroding metal as a scale and dramatically reduce the CO2 corrosion rates on carbon steels. The ability to reliably predict the protective characteristics of such scales so that this knowledge may be used to mitigate the CO2 corrosion problem is the main objective of this research. CO2 corrosion tests performed under various CO2 corrosion flowing conditions in a flow loop were used to generate and study FeCO3 scales. In situ Electrochemical Impedance Spectroscopy (EIS) techniques were successfully used to monitor the development of the scales throughout the duration of the tests. The EIS monitoring enabled the identification of the type of scales being formed and the quantification of the protection they give. A procedure using EIS, SEM and X-ray diffraction was developed to electrochemically and morphologically characterize the scales formed. In this work, morphology of the scales was proved to be the most important characteristic related to CO2 corrosion protection, and temperature was found to be the main environmental parameter controlling the morphology of the scales. For the environmental conditions tested, a correlation was developed to predict the type of iron carbonate scales that would be formed and the amount of CO2 corrosion protection these scales would provide to carbon steels.

Science guides search and rescue after the 2006 Philippine landslide.

PubMed

Lagmay, Alfredo Mahar A; Tengonciang, Arlene Mae P; Rodolfo, Raymond S; Soria, Janneli Lea A; Baliatan, Eden G; Paguican, Engielle R; Ong, John Burtkenley T; Lapus, Mark R; Fernandez, Dan Ferdinand D; Quimba, Zareth P; Uichanco, Christopher L

2008-09-01

A rockslide-debris avalanche destroyed the remote village of Guinsaugon in Southern Leyte, Philippines, on 17 February 2006. Although search and rescue procedures were implemented immediately, the scale of the landslide and a lack of information about its nature resulted in unfocused and imprecise efforts in the early days of the operation. Technical support was only introduced five days after the event, provided by a team of volunteer geologists, geophysicists, and meteorologists. By the time search and rescue operations were transferred to specific target sites, however, the chances of finding survivors trapped under the rubble had diminished. In such critical situations, speed, accuracy, and the maximum appropriation of resources are crucial. We emphasise here the need for a systematic and technically informed approach to search and rescue missions in large-scale landslide disaster contexts, and the formulation of better disaster management policies in general. Standard procedures must be developed and enforced to improve how civil authorities respond to natural calamities.

Excited state TBA and renormalized TCSA in the scaling Potts model

NASA Astrophysics Data System (ADS)

Lencsés, M.; Takács, G.

2014-09-01

We consider the field theory describing the scaling limit of the Potts quantum spin chain using a combination of two approaches. The first is the renormalized truncated conformal space approach (TCSA), while the second one is a new thermodynamic Bethe Ansatz (TBA) system for the excited state spectrum in finite volume. For the TCSA we investigate and clarify several aspects of the renormalization procedure and counter term construction. The TBA system is first verified by comparing its ultraviolet limit to conformal field theory and the infrared limit to exact S matrix predictions. We then show that the TBA and the renormalized TCSA match each other to a very high precision for a large range of the volume parameter, providing both a further verification of the TBA system and a demonstration of the efficiency of the TCSA renormalization procedure. We also discuss the lessons learned from our results concerning recent developments regarding the low-energy scattering of quasi-particles in the quantum Potts spin chain.

Scaling of Two-Phase Flows to Partial-Earth Gravity

NASA Technical Reports Server (NTRS)

Hurlbert, Kathryn M.; Witte, Larry C.

2003-01-01

A report presents a method of scaling, to partial-Earth gravity, of parameters that describe pressure drops and other characteristics of two-phase (liquid/ vapor) flows. The development of the method was prompted by the need for a means of designing two-phase flow systems to operate on the Moon and on Mars, using fluid-properties and flow data from terrestrial two-phase-flow experiments, thus eliminating the need for partial-gravity testing. The report presents an explicit procedure for designing an Earth-based test bed that can provide hydrodynamic similarity with two-phase fluids flowing in partial-gravity systems. The procedure does not require prior knowledge of the flow regime (i.e., the spatial orientation of the phases). The method also provides for determination of pressure drops in two-phase partial-gravity flows by use of a generalization of the classical Moody chart (previously applicable to single-phase flow only). The report presents experimental data from Mars- and Moon-activity experiments that appear to demonstrate the validity of this method.

Reconstructing high-dimensional two-photon entangled states via compressive sensing

PubMed Central

Tonolini, Francesco; Chan, Susan; Agnew, Megan; Lindsay, Alan; Leach, Jonathan

2014-01-01

Accurately establishing the state of large-scale quantum systems is an important tool in quantum information science; however, the large number of unknown parameters hinders the rapid characterisation of such states, and reconstruction procedures can become prohibitively time-consuming. Compressive sensing, a procedure for solving inverse problems by incorporating prior knowledge about the form of the solution, provides an attractive alternative to the problem of high-dimensional quantum state characterisation. Using a modified version of compressive sensing that incorporates the principles of singular value thresholding, we reconstruct the density matrix of a high-dimensional two-photon entangled system. The dimension of each photon is equal to d = 17, corresponding to a system of 83521 unknown real parameters. Accurate reconstruction is achieved with approximately 2500 measurements, only 3% of the total number of unknown parameters in the state. The algorithm we develop is fast, computationally inexpensive, and applicable to a wide range of quantum states, thus demonstrating compressive sensing as an effective technique for measuring the state of large-scale quantum systems. PMID:25306850

Modular Engine Noise Component Prediction System (MCP) Program Users' Guide

NASA Technical Reports Server (NTRS)

Golub, Robert A. (Technical Monitor); Herkes, William H.; Reed, David H.

2004-01-01

This is a user's manual for Modular Engine Noise Component Prediction System (MCP). This computer code allows the user to predict turbofan engine noise estimates. The program is based on an empirical procedure that has evolved over many years at The Boeing Company. The data used to develop the procedure include both full-scale engine data and small-scale model data, and include testing done by Boeing, by the engine manufacturers, and by NASA. In order to generate a noise estimate, the user specifies the appropriate engine properties (including both geometry and performance parameters), the microphone locations, the atmospheric conditions, and certain data processing options. The version of the program described here allows the user to predict three components: inlet-radiated fan noise, aft-radiated fan noise, and jet noise. MCP predicts one-third octave band noise levels over the frequency range of 50 to 10,000 Hertz. It also calculates overall sound pressure levels and certain subjective noise metrics (e.g., perceived noise levels).

Distinguishing centrarchid genera by use of lateral line scales

USGS Publications Warehouse

Roberts, N.M.; Rabeni, C.F.; Stanovick, J.S.

2007-01-01

Predator-prey relations involving fishes are often evaluated using scales remaining in gut contents or feces. While several reliable keys help identify North American freshwater fish scales to the family level, none attempt to separate the family Centrarchidae to the genus level. Centrarchidae is of particular concern in the midwestern United States because it contains several popular sport fishes, such as smallmouth bass Micropterus dolomieu, largemouth bass M. salmoides, and rock bass Ambloplites rupestris, as well as less-sought-after species of sunfishes Lepomis spp. and crappies Pomoxis spp. Differentiating sport fish from non-sport fish has important management implications. Morphological characteristics of lateral line scales (n = 1,581) from known centrarchid fishes were analyzed. The variability of measurements within and between genera was examined to select variables that were the most useful in further classifying unknown centrarchid scales. A linear discriminant analysis model was developed using 10 variables. Based on this model, 84.4% of Ambloplites scales, 81.2% of Lepomis scales, and 86.6% of Micropterus scales were classified correctly using a jackknife procedure. ?? Copyright by the American Fisheries Society 2007.

Development of the Assessment of Belief Conflict in Relationship-14 (ABCR-14).

PubMed

Kyougoku, Makoto; Teraoka, Mutsumi; Masuda, Noriko; Ooura, Mariko; Abe, Yasushi

2015-01-01

Nurses and other healthcare workers frequently experience belief conflict, one of the most important, new stress-related problems in both academic and clinical fields. In this study, using a sample of 1,683 nursing practitioners, we developed The Assessment of Belief Conflict in Relationship-14 (ABCR-14), a new scale that assesses belief conflict in the healthcare field. Standard psychometric procedures were used to develop and test the scale, including a qualitative framework concept and item-pool development, item reduction, and scale development. We analyzed the psychometric properties of ABCR-14 according to entropy, polyserial correlation coefficient, exploratory factor analysis, confirmatory factor analysis, average variance extracted, Cronbach's alpha, Pearson product-moment correlation coefficient, and multidimensional item response theory (MIRT). The results of the analysis supported a three-factor model consisting of 14 items. The validity and reliability of ABCR-14 was suggested by evidence from high construct validity, structural validity, hypothesis testing, internal consistency reliability, and concurrent validity. The result of the MIRT offered strong support for good item response of item slope parameters and difficulty parameters. However, the ABCR-14 Likert scale might need to be explored from the MIRT point of view. Yet, as mentioned above, there is sufficient evidence to support that ABCR-14 has high validity and reliability. The ABCR-14 demonstrates good psychometric properties for nursing belief conflict. Further studies are recommended to confirm its application in clinical practice.

Commercialization of veterinary viral vaccines.

PubMed

Flore, P H

2004-12-01

If vaccines are to reliably prevent disease, they must be developed, produced and quality-controlled according to very strict regulations and procedures. Veterinary viral vaccine registrations are governed by different rules in different countries, but these rules all emphasize that the quality of the raw materials--the cells, eggs, animals or plants that are used in production--need to be carefully controlled. The veterinary vaccine business is also very cost-conscious. Emphasis over the last 5-10 years has therefore been to develop culture systems that minimize labor and sterility problems and thus provide for reliable and cost-effective production. Implementing these often more complex systems in a production environment takes considerable effort, first in scale-up trials and further down the line in convincing production personnel to change their familiar system for something new and possibly untried. To complete scale-up trials successfully, it is absolutely necessary to understand the biochemistry of the cells and the influence of the virus on the cells under scale-up and later production conditions. Once a viral product can be produced on a large scale, it is imperative that the quality of the end-product is controlled in an intelligent way. One needs to know whether the end-product performs in the animal as was intended during its conception in the research and development department. The development of the appropriate tests to demonstrate this plays an important role in the successful development of a vaccine.

Clearing up the hazy road from bench to bedside: a framework for integrating the fourth hurdle into translational medicine.

PubMed

Rogowski, Wolf H; Hartz, Susanne C; John, Jürgen H

2008-09-24

New products evolving from research and development can only be translated to medical practice on a large scale if they are reimbursed by third-party payers. Yet the decision processes regarding reimbursement are highly complex and internationally heterogeneous. This study develops a process-oriented framework for monitoring these so-called fourth hurdle procedures in the context of product development from bench to bedside. The framework is suitable both for new drugs and other medical technologies. The study is based on expert interviews and literature searches, as well as an analysis of 47 websites of coverage decision-makers in England, Germany and the USA. Eight key steps for monitoring fourth hurdle procedures from a company perspective were determined: entering the scope of a healthcare payer; trigger of decision process; assessment; appraisal; setting level of reimbursement; establishing rules for service provision; formal and informal participation; and publication of the decision and supplementary information. Details are given for the English National Institute for Health and Clinical Excellence, the German Federal Joint Committee, Medicare's National and Local Coverage Determinations, and for Blue Cross Blue Shield companies. Coverage determination decisions for new procedures tend to be less formalized than for novel drugs. The analysis of coverage procedures and requirements shows that the proof of patient benefit is essential. Cost-effectiveness is likely to gain importance in future.

How Do Observational Scales Correlate the Ratings of Children's Behavior during Pediatric Procedural Sedation?

PubMed Central

Moura, Larissa da Silva

2016-01-01

Background. There is little information regarding the ability of observational scales to properly assess children's behavior during procedural sedation. Aim. To evaluate the characteristics of the Houpt scales, the Ohio State University Behavioral Rating Scale (OSUBRS) and the Venham Behavior Rating Scale when applied to preschool children undergoing conscious dental sedation. Design. This study included 27 children, 4–6 years old with early childhood caries that participated in a clinical trial (NCT02284204) that investigated two sedative regimes using oral midazolam/ketamine. Dental appointments were video-recorded; five calibrated observers assessed 1,209 minutes of video recording to score the children's behavior, following the instructions of the investigated scales. Data were analyzed by descriptive analysis and Spearman correlation tests (P < 0.05). Results. The Houpt overall behavior and the Venham scale were highly correlated (rho = −0.87; P < 0.001). OSUBRS scores were better correlated with Houpt overall behavior and Venham ratings, when compared to Houpt scores in the categories for movement and crying. Conclusions. The Houpt overall behavior and the Venham scores are global scales that properly measure children's behavior during dental sedation. Continuous assessment with OSUBRS through videos has a chance to give more precise data, while the Houpt categories can easily demonstrate children's behavior during procedures. PMID:28116299

Small scale rainfall simulators: Challenges for a future use in soil erosion research

NASA Astrophysics Data System (ADS)

Ries, Johannes B.; Iserloh, Thomas; Seeger, Manuel

2013-04-01

Rainfall simulation on micro-plot scale is a method used worldwide to assess the generation of overland flow, soil erosion, infiltration and interrelated processes such as soil sealing, crusting, splash and redistribution of solids and solutes. The produced data are of great significance not only for the analysis of the simulated processes, but also as a source of input-data for soil erosion modelling. The reliability of the data is therefore of paramount importance, and quality management of rainfall simulation procedure a general responsibility of the rainfall simulation community. This was an accepted outcome at the "International Rainfall Simulator Workshop 2011" at Trier University. The challenges of the present and near future use of small scale rainfall simulations concern the comparability of results and scales, the quality of the data for soil erosion modelling, and further technical developments to overcome physical limitations and constraints. Regarding the high number of research questions, different fields of application, and due to the great technical creativity of researchers, a large number of different types of rainfall simulators is available. But each of the devices produces a different rainfall, leading to different kinetic energy values influencing soil surface and erosion processes. Plot sizes are also variable, as well as the experimental simulation procedures. As a consequence, differing runoff and erosion results are produced. The presentation summarises the three important aspects of rainfall simulations, following a processual order: 1. Input-factor "rain" and its calibration 2. Surface-factor "plot" and its documentation 3. Output-factors "runoff" and "sediment concentration" Finally, general considerations about the limitations and challenges for further developments and applications of rainfall simulation data are presented.

Success criteria in pediatric neuroendoscopic procedures. Proposal for classification of results after 67 operations.

PubMed

Ros, Bienvenido; Romero, Lorena; Ibáñez, Guillermo; Iglesias, Sara; Rius, Francisca; Pérez, Sandra; Arráez, Miguel A

2012-05-01

Controversial issues exist concerning criteria for patient selection and long-term success in pediatric neuroendoscopic procedures. We designed a classification of success grades applicable to high-pressure and chronic hydrocephalus and also to those cases in which different endoscopic maneuvers are performed during the same procedure. We then evaluated the success rate and complications in our series. A total of 59 patients underwent 67 neuroendoscopic procedures between January 2003 and January 2011. A retrospective study was made of the preoperative history, operative reports, and postoperative imaging findings and medical records. A 5-grade scale was developed to assess the type of success depending on clinical and radiological data. Complications related to the surgical procedure were also recorded. Two patients were excluded from the success analysis due to insufficient follow-up time. The final results for the first procedures in 57 patients were complete and permanent success (grade I) in 49.1%, complete but transitory success (grade II) in 10.5%, partial success (grade III) in 12.3%, doubtful success (grade IV) in 5.3%, and failure (grade V) in 22.8%. In eight cases a second procedure followed the failure of the first: grade I success was achieved in seven cases (87.5%) and grade V in one case (12.5%). The highest success rates were achieved in cases of hydrocephalus caused by tumors or arachnoid cysts and the lowest in slit ventricle syndrome. A common classification of degrees of success, such as that proposed here, would aid the development of comparative and cooperative studies.

Development and initial validation of the Impression Motivation in Sport Questionnaire-Team.

PubMed

Payne, Simon Mark; Hudson, Joanne; Akehurst, Sally; Ntoumanis, Nikos

2013-06-01

Impression motivation is an important individual difference variable that has been under-researched in sport psychology, partly due to having no appropriate measure. This study was conducted to design a measure of impression motivation in team-sport athletes. Construct validity checks decreased the initial pool of items, factor analysis (n = 310) revealed the structure of the newly developed scale, and exploratory structural equation modeling procedures (n = 406) resulted in a modified scale that retained theoretical integrity and psychometric parsimony. This process produced a 15-item, 4-factor model; the Impression Motivation in Sport Questionnaire-Team (IMSQ-T) is forwarded as a valid measure of the respondent's dispositional strength of motivation to use self-presentation in striving for four distinct interpersonal objectives: self-development, social identity development, avoidance of negative outcomes, and avoidance of damaging impressions. The availability of this measure has contributed to theoretical development, will facilitate research, and offers a tool for use in applied settings.

Can Regional Climate Models be used in the assessment of vulnerability and risk caused by extreme events?

NASA Astrophysics Data System (ADS)

Nunes, Ana

2015-04-01

Extreme meteorological events played an important role in catastrophic occurrences observed in the past over densely populated areas in Brazil. This motived the proposal of an integrated system for analysis and assessment of vulnerability and risk caused by extreme events in urban areas that are particularly affected by complex topography. That requires a multi-scale approach, which is centered on a regional modeling system, consisting of a regional (spectral) climate model coupled to a land-surface scheme. This regional modeling system employs a boundary forcing method based on scale-selective bias correction and assimilation of satellite-based precipitation estimates. Scale-selective bias correction is a method similar to the spectral nudging technique for dynamical downscaling that allows internal modes to develop in agreement with the large-scale features, while the precipitation assimilation procedure improves the modeled deep-convection and drives the land-surface scheme variables. Here, the scale-selective bias correction acts only on the rotational part of the wind field, letting the precipitation assimilation procedure to correct moisture convergence, in order to reconstruct South American current climate within the South American Hydroclimate Reconstruction Project. The hydroclimate reconstruction outputs might eventually produce improved initial conditions for high-resolution numerical integrations in metropolitan regions, generating more reliable short-term precipitation predictions, and providing accurate hidrometeorological variables to higher resolution geomorphological models. Better representation of deep-convection from intermediate scales is relevant when the resolution of the regional modeling system is refined by any method to meet the scale of geomorphological dynamic models of stability and mass movement, assisting in the assessment of risk areas and estimation of terrain stability over complex topography. The reconstruction of past extreme events also helps the development of a system for decision-making, regarding natural and social disasters, and reducing impacts. Numerical experiments using this regional modeling system successfully modeled severe weather events in Brazil. Comparisons with the NCEP Climate Forecast System Reanalysis outputs were made at resolutions of about 40- and 25-km of the regional climate model.

Battery Test Manual For Electric Vehicles, Revision 3

DOE Office of Scientific and Technical Information (OSTI.GOV)

Christophersen, Jon P.

2015-06-01

This battery test procedure manual was prepared for the United States Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Office. It is based on technical targets for commercial viability established for energy storage development projects aimed at meeting system level DOE goals for Electric Vehicles (EV). The specific procedures defined in this manual support the performance and life characterization of advanced battery devices under development for EVs. However, it does share some methods described in the previously published battery test manual for plug-in hybrid electric vehicles. Due to the complexity of some of themore » procedures and supporting analysis, future revisions including some modifications and clarifications of these procedures are expected. As in previous battery and capacitor test manuals, this version of the manual defines testing methods for full-size battery systems, along with provisions for scaling these tests for modules, cells or other subscale level devices. The DOE-United States Advanced Battery Consortium (USABC), Technical Advisory Committee (TAC) supported the development of the manual. Technical Team points of contact responsible for its development and revision are Chul Bae of Ford Motor Company and Jon P. Christophersen of the Idaho National Laboratory. The development of this manual was funded by the Unites States Department of Energy, Office of Energy Efficiency and Renewable Energy, Vehicle Technologies Office. Technical direction from DOE was provided by David Howell, Energy Storage R&D Manager and Hybrid Electric Systems Team Leader. Comments and questions regarding the manual should be directed to Jon P. Christophersen at the Idaho National Laboratory (jon.christophersen@inl.gov).« less

Variability in the American Society of Anesthesiologists (ASA) Physical Status (PS) Classification Scale

DTIC Science & Technology

2000-01-03

was altered by several variables (patient condition, planned surgical procedure, experience and skill of surgeon and anesthetist, and attention to...be developed. Variables in addition to the patient physical status ( experience of the surgeon, anesthetist, and hospital personnel) could be entered...specific surgery. Surgical risks include experience of the surgical team, the medical institution, elective versus emergent, availability of

An Efficient Referencing And Sample Positioning System To Investigate Heterogeneous Substances With Combined Microfocused Synchrotron X-ray Techniques

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spangenberg, Thomas; Goettlicher, Joerg; Steininger, Ralph

2009-01-29

A referencing and sample positioning system has been developed to transfer object positions measured with an offline microscope to a synchrotron experimental station. The accuracy should be sufficient to deal with heterogeneous samples on micrometer scale. Together with an online fluorescence mapping visualisation the optical alignment helps to optimize measuring procedures for combined microfocused X-ray techniques.

Scale-space for empty catheter segmentation in PCI fluoroscopic images.

PubMed

Bacchuwar, Ketan; Cousty, Jean; Vaillant, Régis; Najman, Laurent

2017-07-01

In this article, we present a method for empty guiding catheter segmentation in fluoroscopic X-ray images. The guiding catheter, being a commonly visible landmark, its segmentation is an important and a difficult brick for Percutaneous Coronary Intervention (PCI) procedure modeling. In number of clinical situations, the catheter is empty and appears as a low contrasted structure with two parallel and partially disconnected edges. To segment it, we work on the level-set scale-space of image, the min tree, to extract curve blobs. We then propose a novel structural scale-space, a hierarchy built on these curve blobs. The deep connected component, i.e. the cluster of curve blobs on this hierarchy, that maximizes the likelihood to be an empty catheter is retained as final segmentation. We evaluate the performance of the algorithm on a database of 1250 fluoroscopic images from 6 patients. As a result, we obtain very good qualitative and quantitative segmentation performance, with mean precision and recall of 80.48 and 63.04% respectively. We develop a novel structural scale-space to segment a structured object, the empty catheter, in challenging situations where the information content is very sparse in the images. Fully-automatic empty catheter segmentation in X-ray fluoroscopic images is an important and preliminary step in PCI procedure modeling, as it aids in tagging the arrival and removal location of other interventional tools.

Quantitative evaluation of geodiversity: development of methodological procedures with application to territorial management

NASA Astrophysics Data System (ADS)

Forte, J.; Brilha, J.; Pereira, D.; Nolasco, M.

2012-04-01

Although geodiversity is considered the setting for biodiversity, there is still a huge gap in the social recognition of these two concepts. The concept of geodiversity, less developed, is now making its own way as a robust and fundamental idea concerning the abiotic component of nature. From a conservationist point of view, the lack of a broader knowledge concerning the type and spatial variation of geodiversity, as well as its relationship with biodiversity, makes the protection and management of natural or semi-natural areas incomplete. There is a growing need to understand the patterns of geodiversity in different landscapes and to translate this knowledge for territorial management in a practical and effective point of view. This kind of management can also represent an important tool for the development of sustainable tourism, particularly geotourism, which can bring benefits not only for the environment, but also for social and economic purposes. The quantification of geodiversity is an important step in all this process but still few researchers are investing in the development of a proper methodology. The assessment methodologies that were published so far are mainly focused on the evaluation of geomorphological elements, sometimes complemented with information about lithology, soils, hidrology, morphometric variables, climatic surfaces and geosites. This results in very dissimilar areas at very different spatial scales, showing the complexity of the task and the need of further research. This current work aims the development of an effective methodology for the assessment of the maximum elements of geodiversity possible (rocks, minerals, fossils, landforms, soils), based on GIS routines. The main determinant factor for the quantitative assessment is scale, but other factors are also very important, such as the existence of suitable spatial data with sufficient degree of detail. It is expected to attain the proper procedures in order to assess geodiversity at different scales and to produce maps with the spatial representation of the geodiversity index, which could be an inestimable contribute for land-use management.

Annual Research Briefs, 1992

NASA Technical Reports Server (NTRS)

Spinks, Debra (Compiler)

1993-01-01

This report contains the 1992 annual progress reports of the Research Fellows and students of the Center for Turbulence Research. Considerable effort was focused on the large eddy simulation technique for computing turbulent flows. This increased activity has been inspired by the recent predictive successes of the dynamic subgrid scale modeling procedure which was introduced during the 1990 Summer Program. Several Research Fellows and students are presently engaged in both the development of subgrid scale models and their applications to complex flows. The first group of papers in this report contain the findings of these studies. They are followed by reports grouped in the general areas of modeling, turbulence physics, and turbulent reacting flows. The last contribution in this report outlines the progress made on the development of the CTR post-processing facility.

A rational approach to the use of Prandtl's mixing length model in free turbulent shear flow calculations

NASA Technical Reports Server (NTRS)

Rudy, D. H.; Bushnell, D. M.

1973-01-01

Prandtl's basic mixing length model was used to compute 22 test cases on free turbulent shear flows. The calculations employed appropriate algebraic length scale equations and single values of mixing length constant for planar and axisymmetric flows, respectively. Good agreement with data was obtained except for flows, such as supersonic free shear layers, where large sustained sensitivity changes occur. The inability to predict the more gradual mixing in these flows is tentatively ascribed to the presence of a significant turbulence-induced transverse static pressure gradient which is neglected in conventional solution procedures. Some type of an equation for length scale development was found to be necessary for successful computation of highly nonsimilar flow regions such as jet or wake development from thick wall flows.

General aviation crash safety program at Langley Research Center

NASA Technical Reports Server (NTRS)

Thomson, R. G.

1976-01-01

The purpose of the crash safety program is to support development of the technology to define and demonstrate new structural concepts for improved crash safety and occupant survivability in general aviation aircraft. The program involves three basic areas of research: full-scale crash simulation testing, nonlinear structural analyses necessary to predict failure modes and collapse mechanisms of the vehicle, and evaluation of energy absorption concepts for specific component design. Both analytical and experimental methods are being used to develop expertise in these areas. Analyses include both simplified procedures for estimating energy absorption capabilities and more complex computer programs for analysis of general airframe response. Full-scale tests of typical structures as well as tests on structural components are being used to verify the analyses and to demonstrate improved design concepts.

Validation of the XDP-MDSP rating scale for the evaluation of patients with X-linked dystonia-parkinsonism.

PubMed

Pasco, Paul Matthew D; Jamora, Roland Dominic G; Rosales, Raymond L; Diesta, Cid Czarina E; Ng, Arlene R; Teleg, Rosalia A; Go, Criscely L; Lee, Lillian; Fernandez, Hubert H

2017-01-01

X-linked dystonia-parkinsonism(XDP) is a neurodegenerative disorder endemic to the Philippines. A rating scale was developed by the authors under the guidance of the Movement Disorder Society of the Philippines (MDSP) to assess XDP severity and progression, functional impact, and response to treatment in future clinical trials. Our main objective was to validate our new scale, the XDP-MDSP scale. The initial validation process included pragmatic testing to XDP patients followed by a modified Delphi procedure with an international advisory panel of dystonia, parkinsonism and scale development experts. Pearson correlation was used to assess construct validity of our new scale versus the assess construct validity of our new scale versus standard dystonia, parkinsonism, non-motor and functional scales; and also to assess divergent validity against behavioral and cognitive scales. The 37-item XDP-MDSP scale has five parts: I-dystonia, II-parkinsonism, III-non-motor features, IV-ADL, and V-global impression. After initial validation, the scale was administered to 204 XDP patients. Inter-domain correlation for the first four parts was acceptable. The correlation between these domains and the global rating was slightly lower. Correlations between Parts I, II, III, and IV versus standard dystonia, parkinsonism, non-motor and functional scales were acceptable with values ranging from 0.323 to 0.428. For divergent validity, a significant correlation was seen with behavioral scales. No significant correlation was noted with the cognitive scale. The proposed XDP-MDSP scale is internally valid but the global rating subscale may need to be modified or eliminated. While there is convergent validity, divergent validation was successful only on cognitive and not behavioral scales. The frequent co-occurrence of anxiety and depression, and its effect on the motor and functional state, may explain this finding.

A Testbed for Model Development

NASA Astrophysics Data System (ADS)

Berry, J. A.; Van der Tol, C.; Kornfeld, A.

2014-12-01

Carbon cycle and land-surface models used in global simulations need to be computationally efficient and have a high standard of software engineering. These models also make a number of scaling assumptions to simplify the representation of complex biochemical and structural properties of ecosystems. This makes it difficult to use these models to test new ideas for parameterizations or to evaluate scaling assumptions. The stripped down nature of these models also makes it difficult to "connect" with current disciplinary research which tends to be focused on much more nuanced topics than can be included in the models. In our opinion/experience this indicates the need for another type of model that can more faithfully represent the complexity ecosystems and which has the flexibility to change or interchange parameterizations and to run optimization codes for calibration. We have used the SCOPE (Soil Canopy Observation, Photochemistry and Energy fluxes) model in this way to develop, calibrate, and test parameterizations for solar induced chlorophyll fluorescence, OCS exchange and stomatal parameterizations at the canopy scale. Examples of the data sets and procedures used to develop and test new parameterizations are presented.

Development of a large-scale, outdoor, ground-based test capability for evaluating the effect of rain on airfoil lift

NASA Technical Reports Server (NTRS)

Bezos, Gaudy M.; Campbell, Bryan A.

1993-01-01

A large-scale, outdoor, ground-based test capability for acquiring aerodynamic data in a simulated rain environment was developed at the Langley Aircraft Landing Dynamics Facility (ALDF) to assess the effect of heavy rain on airfoil performance. The ALDF test carriage was modified to transport a 10-ft-chord NACA 64210 wing section along a 3000-ft track at full-scale aircraft approach speeds. An overhead rain simulation system was constructed along a 525-ft section of the track with the capability of producing simulated rain fields of 2, 10, 30, and 40 in/hr. The facility modifications, the aerodynamic testing and rain simulation capability, the design and calibration of the rain simulation system, and the operational procedures developed to minimize the effect of wind on the simulated rain field and aerodynamic data are described in detail. The data acquisition and reduction processes are also presented along with sample force data illustrating the environmental effects on data accuracy and repeatability for the 'rain-off' test condition.

Toolbox of assessment tools of technical skills in otolaryngology-head and neck surgery: A systematic review.

PubMed

Labbé, Mathilde; Young, Meredith; Nguyen, Lily H P

2017-10-08

To support the development of programs of assessment of technical skills in the operating room (OR), we systematically reviewed the literature to identify assessment tools specific to otolaryngology-head and neck surgery (OTL-HNS) core procedures and summarized their characteristics. We systematically searched Embase, MEDLINE, PubMed, and Cochrane to identify and report on assessment tools that can be used to assess residents' technical surgical skills in the operating room for OTL-HNS core procedures. Of the 736 unique titles retrieved, 16 articles met inclusion criteria, covering 11 different procedures (in otology, rhinology, laryngology, head and neck, and general otolaryngology). The tools were composed of a task-specific checklist and/or global rating scale and were developed in the OR, on human cadavers, or in a simulation setting. Our study reports on published tools for assessing technical skills for OTL-HNS residents during core procedures conducted in the OR. These assessment tools could facilitate the provision of timely feedback to trainees including specific goals for improvement. However, the paucity of publications suggests little agreement on how to best perform work-based direct-observation assessment for core surgical procedures in OTL-HNS. The sparsity of tools specific to OTL-HNS may become a barrier to a fluid transition to competency-based medical education. Laryngoscope, 2017. © 2017 The American Laryngological, Rhinological and Otological Society, Inc.

Toward Better Physics Labs for Future Biologists

NASA Astrophysics Data System (ADS)

Giannini, John; Moore, Kim; Losert, Wolfgang

2014-03-01

We have developed a set of laboratories and hands on activities to accompany a new two-semester interdisciplinary physics course that has been successfully developed and tested in two small test classes of students at the University of Maryland, College Park (UMD) in 2012-2013, and is currently being used on a wider scale. We have designed the laboratories to be taken accompanying a reformed course in the student's second year, with calculus, biology, and chemistry as prerequisites. This permits the laboratories to include significant content on physics relevant to cellular scales, from chemical interactions to random motion and charge screening in fluids. One major focus of the laboratories is to introduce the students to research-grade equipment and modern physics analysis tools in contexts relevant to biology, while maintaining the pedagogically valuable open-ended laboratory structure of reformed laboratories. Lab development procedures along with some preliminary student results from these two small test classes are discussed.

Research on solar pumped liquid lasers

NASA Technical Reports Server (NTRS)

Schneider, R. T.; Kurzweg, U. H.; Cox, J. D.; Weinstein, N. H.

1983-01-01

A solar pumped liquid laser that can be scaled up to high power (10Mw CW) for space applications was developed. Liquid lasers have the inherent advantage over gases in that they provide much higher lasant densities and thus high power densities. Liquids also have inherent advantages over solids in that they have much higher damage thresholds and are much cheaper to produce for large scale applications. Among the liquid laser media that are potential candidates for solar pumping, the POC13:Nd(3+):ZrC14 liquid was chosen for its high intrinsic efficiency as well as its relatively good stability against decomposition due to protic contamination. The development and testing of the laser liquid and the development of a large solar concentrator to pump the laser was emphasized. The procedure to manufacture the laser liquid must include diagnostic tests of the solvent purity (from protic contamination) at various stages in the production process.

An Integrated Experimental-Modelling Procedure Applied to the Design of a Field Scale Goethite Nanoparticle Injection for the Remediation of Contaminated Sites

NASA Astrophysics Data System (ADS)

Bianco, C.; Tosco, T.; Sethi, R.

2017-12-01

Nanoremediation is a promising in-situ technology for the reclamation of contaminated aquifers. It consists in the subsurface injection of a reactive colloidal suspension for the in-situ treatment of pollutants. The overall success of this technology at the field scale is strictly related to the achievement of an effective and efficient emplacement of the nanoparticles (NP) inside the contaminated area. Mathematical models can be used to support the design of nanotechnology-based remediation by effectively assessing the expected NP mobility at the field scale. Several analytical and numerical tools have been developed in recent years to model the transport of NPs in simplified geometry and boundary conditions. The numerical tool MNMs was developed by the authors of this work to simulate colloidal transport in 1D Cartesian and radial coordinates. A new modelling tool, MNM3D (Micro and Nanoparticle transport Model in 3D geometries), was also proposed for the simulation of injection and transport of NP suspensions in generic complex scenarios. MNM3D accounts for the simultaneous dependency of NP transport on water ionic strength and velocity. The software was developed to predict the NP mobility at different stages of a nanoremediation application, from the design stage to the prediction of the long-term fate after injection. In this work an integrated experimental-modelling procedure is applied to support the design of a field scale injection of goethite NPs carried out in the framework of the H2020 European project Reground. Column tests are performed at different injection flowrates using natural sand collected at the contaminated site as porous medium. The tests are interpreted using MNMs to characterize the NP mobility and derive the constitutive equations describing the suspension behavior in the natural porous medium. MNM3D is then used to predict NP behavior during the field scale injection and to assess the long-term mobility of the injected slurry. Finally, different injection scenarios were simulated to get a reliable estimation of several operating parameters, e.g. particle distribution around the injection well, radius of influence, number of required wells.

Toward Increasing Fairness in Score Scale Calibrations Employed in International Large-Scale Assessments

ERIC Educational Resources Information Center

Oliveri, Maria Elena; von Davier, Matthias

2014-01-01

In this article, we investigate the creation of comparable score scales across countries in international assessments. We examine potential improvements to current score scale calibration procedures used in international large-scale assessments. Our approach seeks to improve fairness in scoring international large-scale assessments, which often…

Additional Results of Glaze Icing Scaling in SLD Conditions

NASA Technical Reports Server (NTRS)

Tsao, Jen-Ching

2016-01-01

New guidance of acceptable means of compliance with the super-cooled large drops (SLD) conditions has been issued by the U.S. Department of Transportation's Federal Aviation Administration (FAA) in its Advisory Circular AC 25-28 in November 2014. The Part 25, Appendix O is developed to define a representative icing environment for super-cooled large drops. Super-cooled large drops, which include freezing drizzle and freezing rain conditions, are not included in Appendix C. This paper reports results from recent glaze icing scaling tests conducted in NASA Glenn Icing Research Tunnel (IRT) to evaluate how well the scaling methods recommended for Appendix C conditions might apply to SLD conditions. The models were straight NACA 0012 wing sections. The reference model had a chord of 72 inches and the scale model had a chord of 21 inches. Reference tests were run with airspeeds of 100 and 130.3 knots and with MVD's of 85 and 170 microns. Two scaling methods were considered. One was based on the modified Ruff method with scale velocity found by matching the Weber number W (sub eL). The other was proposed and developed by Feo specifically for strong glaze icing conditions, in which the scale liquid water content and velocity were found by matching reference and scale values of the non-dimensional water-film thickness expression and the film Weber number W (sub ef). All tests were conducted at 0 degrees angle of arrival. Results will be presented for stagnation freezing fractions of 0.2 and 0.3. For non-dimensional reference and scale ice shape comparison, a new post-scanning ice shape digitization procedure was developed for extracting 2-dimensional ice shape profiles at any selected span-wise location from the high fidelity 3-dimensional scanned ice shapes obtained in the IRT.

Additional Results of Glaze Icing Scaling in SLD Conditions

NASA Technical Reports Server (NTRS)

Tsao, Jen-Ching

2016-01-01

New guidance of acceptable means of compliance with the super-cooled large drops (SLD) conditions has been issued by the U.S. Department of Transportation's Federal Aviation Administration (FAA) in its Advisory Circular AC 25-28 in November 2014. The Part 25, Appendix O is developed to define a representative icing environment for super-cooled large drops. Super-cooled large drops, which include freezing drizzle and freezing rain conditions, are not included in Appendix C. This paper reports results from recent glaze icing scaling tests conducted in NASA Glenn Icing Research Tunnel (IRT) to evaluate how well the scaling methods recommended for Appendix C conditions might apply to SLD conditions. The models were straight NACA 0012 wing sections. The reference model had a chord of 72 in. and the scale model had a chord of 21 in. Reference tests were run with airspeeds of 100 and 130.3 kn and with MVD's of 85 and 170 micron. Two scaling methods were considered. One was based on the modified Ruff method with scale velocity found by matching the Weber number WeL. The other was proposed and developed by Feo specifically for strong glaze icing conditions, in which the scale liquid water content and velocity were found by matching reference and scale values of the nondimensional water-film thickness expression and the film Weber number Wef. All tests were conducted at 0 deg AOA. Results will be presented for stagnation freezing fractions of 0.2 and 0.3. For nondimensional reference and scale ice shape comparison, a new post-scanning ice shape digitization procedure was developed for extracting 2-D ice shape profiles at any selected span-wise location from the high fidelity 3-D scanned ice shapes obtained in the IRT.

Estimation of skeletal muscle mass from body creatine content

NASA Technical Reports Server (NTRS)

Pace, N.; Rahlmann, D. F.

1982-01-01

Procedures have been developed for studying the effect of changes in gravitational loading on skeletal muscle mass through measurements of the body creatine content. These procedures were developed for studies of gravitational scale effects in a four-species model, comprising the hamster, rat, guinea pig, and rabbit, which provides a sufficient range of body size for assessment of allometric parameters. Since intracellular muscle creatine concentration varies among species, and with age within a given species, the concentration values for metabolically mature individuals of these four species were established. The creatine content of the carcass, skin, viscera, smooth muscle, and skeletal muscle was determined for each species. In addition, the skeletal muscle mass of the major body components was determined, as well as the total and fat-free masses of the body and carcass, and the percent skeletal muscle in each. It is concluded that these procedures are particularly useful for studying the effect of gravitational loading on the skeletal muscle content of the animal carcass, which is the principal weight-bearing organ of the body.

Psychometric Development of the Research and Knowledge Scale.

PubMed

Powell, Lauren R; Ojukwu, Elizabeth; Person, Sharina D; Allison, Jeroan; Rosal, Milagros C; Lemon, Stephenie C

2017-02-01

Many research participants are misinformed about research terms, procedures, and goals; however, no validated instruments exist to assess individual's comprehension of health-related research information. We propose research literacy as a concept that incorporates understanding about the purpose and nature of research. We developed the Research and Knowledge Scale (RaKS) to measure research literacy in a culturally, literacy-sensitive manner. We describe its development and psychometric properties. Qualitative methods were used to assess perspectives of research participants and researchers. Literature and informed consent reviews were conducted to develop initial items. These data were used to develop initial domains and items of the RaKS, and expert panel reviews and cognitive pretesting were done to refine the scale. We conducted psychometric analyses to evaluate the scale. The cross-sectional survey was administered to a purposive community-based sample (n=430) using a Web-based data collection system and paper. We did classic theory testing on individual items and assessed test-retest reliability and Kuder-Richardson-20 for internal consistency. We conducted exploratory factor analysis and analysis of variance to assess differences in mean research literacy scores in sociodemographic subgroups. The RaKS is comprised of 16 items, with a Kuder-Richardson-20 estimate of 0.81 and test-retest reliability 0.84. There were differences in mean scale scores by race/ethnicity, age, education, income, and health literacy (all P<0.01). This study provides preliminary evidence for the reliability and validity of the RaKS. This scale can be used to measure research participants' understanding about health-related research processes and identify areas to improve informed decision-making about research participation.

A rainfall disaggregation scheme for sub-hourly time scales: Coupling a Bartlett-Lewis based model with adjusting procedures

NASA Astrophysics Data System (ADS)

Kossieris, Panagiotis; Makropoulos, Christos; Onof, Christian; Koutsoyiannis, Demetris

2018-01-01

Many hydrological applications, such as flood studies, require the use of long rainfall data at fine time scales varying from daily down to 1 min time step. However, in the real world there is limited availability of data at sub-hourly scales. To cope with this issue, stochastic disaggregation techniques are typically employed to produce possible, statistically consistent, rainfall events that aggregate up to the field data collected at coarser scales. A methodology for the stochastic disaggregation of rainfall at fine time scales was recently introduced, combining the Bartlett-Lewis process to generate rainfall events along with adjusting procedures to modify the lower-level variables (i.e., hourly) so as to be consistent with the higher-level one (i.e., daily). In the present paper, we extend the aforementioned scheme, initially designed and tested for the disaggregation of daily rainfall into hourly depths, for any sub-hourly time scale. In addition, we take advantage of the recent developments in Poisson-cluster processes incorporating in the methodology a Bartlett-Lewis model variant that introduces dependence between cell intensity and duration in order to capture the variability of rainfall at sub-hourly time scales. The disaggregation scheme is implemented in an R package, named HyetosMinute, to support disaggregation from daily down to 1-min time scale. The applicability of the methodology was assessed on a 5-min rainfall records collected in Bochum, Germany, comparing the performance of the above mentioned model variant against the original Bartlett-Lewis process (non-random with 5 parameters). The analysis shows that the disaggregation process reproduces adequately the most important statistical characteristics of rainfall at wide range of time scales, while the introduction of the model with dependent intensity-duration results in a better performance in terms of skewness, rainfall extremes and dry proportions.

Managing multiple roles: development of the Work-Family Conciliation Strategies Scale.

PubMed

Matias, Marisa; Fontaine, Anne Marie

2014-07-17

Juggling the demands of work and family is becoming increasingly difficult in today's world. As dual-earners are now a majority and men and women's roles in both the workplace and at home have changed, questions have been raised regarding how individuals and couples can balance family and work. Nevertheless, research addressing work-family conciliation strategies is limited to a conflict-driven approach and context-specific instruments are scarce. This study develops an instrument for assessing how dual-earners manage their multiple roles detaching from a conflict point of view highlighting the work-family conciliation strategies put forward by these couples. Through qualitative and quantitative procedures the Work-Family Conciliation Strategies Scales was developed and is composed by 5 factors: Couple Coping; Positive Attitude Towards Multiple Roles, Planning and Management Skills, Professional Adjustments and Institutional Support; with good adjustment [χ2/df = 1.22; CFI = .90, RMSEA = .04, SRMR = .08.] and good reliability coefficients [from .67 to .87]. The developed scale contributes to research because of its specificity to the work-family framework and its focus on the proactive nature of balancing work and family roles. The results support further use of this instrument.

'Losing my touch': decline in self-reported confidence in performing practical procedures in consultant oncologists.

PubMed

Thomson, A H; Foy, C J W; Benstead, K

2006-08-01

This study aimed to compare the confidence of oncology consultants and specialist registrars (SpRs) in the performance of practical procedures, to contrast this with confidence in other areas of practice and to determine at what grade they felt most confident. Questionnaires were sent to all 57 oncology consultants and SpRs in the South-West region. Respondents scored confidence on a five-point Likert scale. The response rate was 70%. SpRs were significantly more confident in cardiopulmonary resuscitation (p = 0.003) and central line insertion (p = 0.006). Consultants were significantly more confident in developing management plans (p = 0.001) and performing committee work (p = 0.002). Only 6% of consultants felt most confident performing practical procedures as a consultant, and were less confident about these than other tasks (p = 0.001). Some 86% of SpRs considered they were more confident performing practical procedures as senior house officers (SHOs). In conclusion, self-reported confidence in performing practical procedures declines during career progression in oncology. This raises questions about the teaching and supervision of these procedures. If there is a greater emphasis on a consultant-provided service, their educational needs will need to be recognized and retraining or outsourcing of these procedures to other specialties may be necessary.

Justice in Health Care Decision-Making: Patients’ Appraisals of Health Care Providers and Health Plan Representatives

PubMed Central

Fondacaro, Mark; Frogner, Bianca; Moos, Rudolf

2010-01-01

This study describes the development of two versions of a Health Care Justice Inventory (HCJI). One version focuses on patients’ interactions with their providers (HCJI-P) and the other focuses on patients’ interactions with the representatives of their health plans (HCJI-HP). Each version of the HCJI assesses patients’ appraisals of their interactions (with either their Provider or representatives of their Health Plan) along three common dimensions of procedural justice: Trust, Impartiality, and Participation. Both the Provider and Health Plan scales assess indices that are relatively independent of patients’ demographic characteristics. In addition, patients’ appraisals of their interactions with their provider were only moderately related to their appraisals of their interactions with representatives of their health plan, indicating that the Provider and Health Plan scales tap distinct aspects of patients’ overall experience with the health care system. Overall, procedural justice dimensions were significantly related to patient satisfaction in both the Provider and the Health Plan contexts. As predicted, procedural justice factors were more strongly tied to patient satisfaction in the Provider than in the Health Plan context, and health care decisions based on distributive justice principles of Need (rather than Equity or Equality) were most closely tied to patient satisfaction in both contexts. PMID:16021741

An integrated cell culture lab on a chip: modular microdevices for cultivation of mammalian cells and delivery into microfluidic microdroplets.

PubMed

Hufnagel, Hansjörg; Huebner, Ansgar; Gülch, Carina; Güse, Katharina; Abell, Chris; Hollfelder, Florian

2009-06-07

We present a modular system of microfluidic PDMS devices designed to incorporate the steps necessary for cell biological assays based on mammalian tissue culture 'on-chip'. The methods described herein include the on-chip immobilization and culturing of cells as well as their manipulation by transfection. Assessment of cell viability by flow cytrometry suggests low attrition rates (<3%) and excellent growth properties in the device for up to 7 days for CHO-K1 cells. To demonstrate that key procedures from the repertoire of cell biology are possible in this format, transfection of a reporter gene (encoding green fluorescent protein) was carried out. The modular design enables efficient detachment and recollection of cells and allows assessment of the success of transfection achieved on-chip. The transfection levels (20%) are comparable to standard large scale procedures and more than 500 cells could be transfected. Finally, cells are transferred into microfluidic microdoplets, where in principle a wide range of subsequent assays can be carried out at the single cell level in droplet compartments. The procedures developed for this modular device layout further demonstrate that commonly used methods in cell biology involving mammalian cells can be reliably scaled down to allow single cell investigations in picolitre volumes.

Novel Sorbent Development and Evaluation for the Capture of Krypton and Xenon from Nuclear Fuel Reprocessing Off-Gas Streams

DOE Office of Scientific and Technical Information (OSTI.GOV)

Troy G. Garn; Mitchell R. Greenhalgh; Jack D. Law

2013-10-01

The release of volatile radionuclides generated during Used Nuclear Fuel reprocessing in the US will most certainly need to be controlled to meet US regulatory emission limits. A US DOE sponsored Off-Gas Sigma Team has been tasked with a multi-lab collaborative research and development effort to investigate and evaluate emissions and immobilization control technologies for the volatile radioactive species generated from commercial Used Nuclear Fuel (UNF) Reprocessing. Physical Adsorption technology is a simpler and potential economical alternative to cryogenic distillation processes that can be used for the capture of krypton and xenon and has resulted in a novel composite sorbentmore » development procedure using synthesized mordenite as the active material. Utilizing the sorbent development procedure, INL sigma team members have developed two composite sorbents that have been evaluated for krypton and xenon capacities at ambient and 191 K temperature using numerous test gas compositions. Adsorption isotherms have been generated to predict equilibration and maximum capacities enabling modeling to support process equipment scale-up.« less

Novel Sorbent Development and Evaluation for the Capture of Krypton and Xenon from Nuclear Fuel Reprocessing Off-Gas Streams

DOE Office of Scientific and Technical Information (OSTI.GOV)

Troy G. Garn; Mitchell R. Greenhalgh; Jack D. Law

2013-09-01

The release of volatile radionuclides generated during Used Nuclear Fuel reprocessing in the US will most certainly need to be controlled to meet US regulatory emission limits. A US DOE sponsored Off-Gas Sigma Team has been tasked with a multi-lab collaborative research and development effort to investigate and evaluate emissions and immobilization control technologies for the volatile radioactive species generated from commercial Used Nuclear Fuel (UNF) Reprocessing. Physical Adsorption technology is a simpler and potential economical alternative to cryogenic distillation processes that can be used for the capture of krypton and xenon and has resulted in a novel composite sorbentmore » development procedure using synthesized mordenite as the active material. Utilizing the sorbent development procedure, INL sigma team members have developed two composite sorbents that have been evaluated for krypton and xenon capacities at ambient and 191 K temperature using numerous test gas compositions. Adsorption isotherms have been generated to predict equilibration and maximum capacities enabling modeling to support process equipment scale-up.« less

A therapist version of the Alliance Negotiation Scale.

PubMed

Doran, Jennifer M; Gómez-Penedo, Juan Martín; Safran, Jeremy D; Roussos, Andrés

2018-05-02

The aim of the current study was to design and evaluate a therapist version of the Alliance Negotiation Scale (ANS). The ANS was created in order to operationalize the construct of dyadic negotiation in psychotherapy and to augment existing conceptualizations of the working alliance. The ANS has existed only as a client self-report form since its inception and has demonstrated promise as a psychotherapy process measure. This research intended to develop a complementary therapist self-report version of the measure. The scale creation process is discussed in detail, and the results of a preliminary psychometric investigation are reported. The ANS-Therapist version (ANS-T) was developed using a sample of therapists (n = 114) through a principal components analysis procedure. The ANS-T contains 9 unidimensional items and was moderately correlated with therapist-reported working alliance (r = .468). The results of the study support the composition of the ANS-T and provide initial support for the reliability and validity of the measure. Copyright © 2018 John Wiley & Sons, Ltd.

A U.S. Army CH-47 Chinook helicopter slowly lowers the X-40 sub-scale technology demonstrator to the ground under the watchful eyes of ground crew at the conclusion of a captive-carry test flight

NASA Image and Video Library

2000-12-08

A U.S. Army CH-47 Chinook helicopter slowly lowers the X-40 sub-scale technology demonstrator to the ground under the watchful eyes of ground crew at the conclusion of a captive-carry test flight at NASA's Dryden Flight Research Center, Edwards, California. Several captive-carry flights were conducted to check out all operating systems and procedures before the X-40 made its first free flight at Edwards, gliding to a fully-autonomous approach and landing on the Edwards runway. The X-40 is an unpowered 82 percent scale version of the X-37, a Boeing-developed spaceplane designed to demonstrate various advanced technologies for development of future lower-cost access to space vehicles. Flight tests of the X-40 are designed to reduce the risks associated with research flights of the larger, more complex X-37.

Compression based entropy estimation of heart rate variability on multiple time scales.

PubMed

Baumert, Mathias; Voss, Andreas; Javorka, Michal

2013-01-01

Heart rate fluctuates beat by beat in a complex manner. The aim of this study was to develop a framework for entropy assessment of heart rate fluctuations on multiple time scales. We employed the Lempel-Ziv algorithm for lossless data compression to investigate the compressibility of RR interval time series on different time scales, using a coarse-graining procedure. We estimated the entropy of RR interval time series of 20 young and 20 old subjects and also investigated the compressibility of randomly shuffled surrogate RR time series. The original RR time series displayed significantly smaller compression entropy values than randomized RR interval data. The RR interval time series of older subjects showed significantly different entropy characteristics over multiple time scales than those of younger subjects. In conclusion, data compression may be useful approach for multiscale entropy assessment of heart rate variability.

Using Agent Base Models to Optimize Large Scale Network for Large System Inventories

NASA Technical Reports Server (NTRS)

Shameldin, Ramez Ahmed; Bowling, Shannon R.

2010-01-01

The aim of this paper is to use Agent Base Models (ABM) to optimize large scale network handling capabilities for large system inventories and to implement strategies for the purpose of reducing capital expenses. The models used in this paper either use computational algorithms or procedure implementations developed by Matlab to simulate agent based models in a principal programming language and mathematical theory using clusters, these clusters work as a high performance computational performance to run the program in parallel computational. In both cases, a model is defined as compilation of a set of structures and processes assumed to underlie the behavior of a network system.

DIALOG: An executive computer program for linking independent programs

NASA Technical Reports Server (NTRS)

Glatt, C. R.; Hague, D. S.; Watson, D. A.

1973-01-01

A very large scale computer programming procedure called the DIALOG executive system was developed for the CDC 6000 series computers. The executive computer program, DIALOG, controls the sequence of execution and data management function for a library of independent computer programs. Communication of common information is accomplished by DIALOG through a dynamically constructed and maintained data base of common information. Each computer program maintains its individual identity and is unaware of its contribution to the large scale program. This feature makes any computer program a candidate for use with the DIALOG executive system. The installation and uses of the DIALOG executive system are described.

Diffusional aspects of the high-temperature oxidation of protective coatings

NASA Technical Reports Server (NTRS)

Nesbitt, J. A.

1989-01-01

The role of diffusional transport associated with the high-temperature oxidation of coatings is examined, with special attention given to the low-pressure plasma spraying MCrAl-type overlay coatings and similar Ni-base alloys which form protective AlO3 scales. The use of diffusional analysis to predict the minimum solute concentration necessary to form and grow a solute oxide scale is illustrated. Modeling procedures designed to simulate the diffusional transport in coatings and substrates are presented to show their use in understanding coating degradation, predicting the protective life of a coating, and evaluating various coating parameters to guide coating development.

A methodology for small scale rural land use mapping in semi-arid developing countries using orbital imagery. Part 4: Review of land use surveys using orbital imagery outside of the USA

NASA Technical Reports Server (NTRS)

Vangenderen, J. L. (Principal Investigator); Lock, B. F.

1976-01-01

The author has identified the following significant results. Outside the U.S., various attempts were made to investigate the feasibility of utilizing orbital MSS imagery in the production of small scale land use maps. Overall, these studies are not as elaborate or extensive in their scope as the U.S. ones, and generally the non-U.S. investigators have employed nonsophisticated and less expensive techniques. A representative range of studies is presented to demonstrate the approaches and trends dealing with reprocessing, interpretation, classification, sampling, and ground truth procedures.

Completely automated modal analysis procedure based on the combination of different OMA methods

NASA Astrophysics Data System (ADS)

Ripamonti, Francesco; Bussini, Alberto; Resta, Ferruccio

2018-03-01

In this work a completely automated output-only Modal Analysis procedure is presented and all its benefits are listed. Based on the merging of different Operational Modal Analysis methods and a statistical approach, the identification process has been improved becoming more robust and giving as results only the real natural frequencies, damping ratios and mode shapes of the system. The effect of the temperature can be taken into account as well, leading to the creation of a better tool for automated Structural Health Monitoring. The algorithm has been developed and tested on a numerical model of a scaled three-story steel building present in the laboratories of Politecnico di Milano.

Agricultural soil moisture experiment, Colby, Kansas 1978: Measured and predicted hydrological properties of the soil

NASA Technical Reports Server (NTRS)

Arya, L. M. (Principal Investigator)

1980-01-01

Predictive procedures for developing soil hydrologic properties (i.e., relationships of soil water pressure and hydraulic conductivity to soil water content) are presented. Three models of the soil water pressure-water content relationship and one model of the hydraulic conductivity-water content relationship are discussed. Input requirements for the models are indicated, and computational procedures are outlined. Computed hydrologic properties for Keith silt loam, a soil typer near Colby, Kansas, on which the 1978 Agricultural Soil Moisture Experiment was conducted, are presented. A comparison of computed results with experimental data in the dry range shows that analytical models utilizing a few basic hydrophysical parameters can produce satisfactory data for large-scale applications.

The Implicit Relational Assessment Procedure as a Measure of Implicit Depression and the Role of Psychological Flexibility

ERIC Educational Resources Information Center

Hussey, Ian; Barnes-Holmes, Dermot

2012-01-01

A broad implicit measure of depressive emotional reactions was created by mapping the content of the depression scale from the Depression Anxiety and Stress Scale (DASS) on to the Implicit Relational Assessment Procedure (IRAP). Participants were asked to relate pairings of antecedents and emotional reactions that followed the formula "When X…

The PrOSTE: identifying key components of effective procedural teaching.

PubMed

McSparron, Jakob I; Ricotta, Daniel N; Moskowitz, Ari; Volpicelli, Frank M; Roberts, David H; Schwartzstein, Richard M; Huang, Grace C

2015-02-01

Novel approaches for faculty development and assessment of procedural teaching skills are needed to improve the procedural education of trainees. The Objective Structured Teaching Exercise (OSTE) entails a simulated encounter in which faculty are observed teaching a standardized student and has been used to evaluate teaching skills. Use of an OSTE to assess the teaching of central venous catheterization has not been reported. The purpose of this study was to develop a procedural OSTE for subclavian central venous catheter (CVC) insertion and to determine specific aspects of procedural teaching associated with improved skills in novices. Critical care faculty/fellows taught a standardized student to insert a CVC in a simulator. We assessed the instructor's teaching skills using rating scales to generate a procedural teaching score. After this encounter, the instructor taught novice medical students to place CVCs in simulators. Novices then independently placed catheters in simulators and were evaluated by trained observers using a checklist. Generalized estimating equations were used to examine the correlation between specific teaching behaviors and the novices' skills in CVC placement. We recruited 10 participants to serve as teachers and 30 preclinical medical students to serve as novice learners. The overall mean procedural teaching score was 85.5 (±15.4). Improved student performance was directly related to the degree to which the teacher "provided positive feedback" (β = 1.53, SE = 0.44, P = 0.001), "offered learner suggestions for improvement" (β = 1.40, SE = 0.35, P < 0.001), and "demonstrated the procedure in a step-by-step manner" (β = 2.50, SE = 0.45, P < 0.001). There was no significant correlation between total scores and student skills (β = 0.06, SE = 0.46, P = 0.18). The OSTE is a standardized method to assess procedural teaching skills. Our findings suggest that specific aspects of procedural teaching should be emphasized to ensure effective transfer of psychomotor skills to trainees.

AOT Retrieval Procedure for Distributed Measurements With Low-Cost Sun Photometers

NASA Astrophysics Data System (ADS)

Toledo, F.; Garrido, C.; Díaz, M.; Rondanelli, R.; Jorquera, S.; Valdivieso, P.

2018-01-01

We propose a new application of inexpensive light-emitting diode (LED)-based Sun photometers, consisting of measuring the aerosol optical thickness (AOT) with high resolution within metropolitan scales. Previously, these instruments have been used at continental scales by the GLOBE program, but this extension is already covered by more expensive and higher-precision instruments of the AERONET global network. For this we built an open source two-channeled LED-based Sun photometer based on previous developments, with improvements in the hardware, software, and modifications on the calibration procedure. Among these we highlight the use of MODTRAN to characterize the effect introduced by using LED sensors in the AOT retrieval, an open design available for the scientific community and a calibration procedure that takes advantage of a CIMEL Sun photometer located within the city, enables the intercomparison of several LED Sun photometers with a common reference. We estimated the root-mean-square error in the AOT retrieved by the prototypes as 0.006 at the 564 nm and 0.009 at the 408 nm. This error is way under the magnitude of the AOT daily cycle variability measured by us in our campaigns, even for distances closer than 15 km. In addition to inner city campaigns, we also show aerosol-tracing applications by measuring AOT variations from the city of Santiago to the Andes glaciers. Measuring AOT at high spatial resolution in urban areas can improve our understanding of urban scale aerosol circulation, providing information for solar energy planning, health policies, and climatological studies, among others.

Semi-automatic assessment of skin capillary density: proof of principle and validation.

PubMed

Gronenschild, E H B M; Muris, D M J; Schram, M T; Karaca, U; Stehouwer, C D A; Houben, A J H M

2013-11-01

Skin capillary density and recruitment have been proven to be relevant measures of microvascular function. Unfortunately, the assessment of skin capillary density from movie files is very time-consuming, since this is done manually. This impedes the use of this technique in large-scale studies. We aimed to develop a (semi-) automated assessment of skin capillary density. CapiAna (Capillary Analysis) is a newly developed semi-automatic image analysis application. The technique involves four steps: 1) movement correction, 2) selection of the frame range and positioning of the region of interest (ROI), 3) automatic detection of capillaries, and 4) manual correction of detected capillaries. To gain insight into the performance of the technique, skin capillary density was measured in twenty participants (ten women; mean age 56.2 [42-72] years). To investigate the agreement between CapiAna and the classic manual counting procedure, we used weighted Deming regression and Bland-Altman analyses. In addition, intra- and inter-observer coefficients of variation (CVs), and differences in analysis time were assessed. We found a good agreement between CapiAna and the classic manual method, with a Pearson's correlation coefficient (r) of 0.95 (P<0.001) and a Deming regression coefficient of 1.01 (95%CI: 0.91; 1.10). In addition, we found no significant differences between the two methods, with an intercept of the Deming regression of 1.75 (-6.04; 9.54), while the Bland-Altman analysis showed a mean difference (bias) of 2.0 (-13.5; 18.4) capillaries/mm(2). The intra- and inter-observer CVs of CapiAna were 2.5% and 5.6% respectively, while for the classic manual counting procedure these were 3.2% and 7.2%, respectively. Finally, the analysis time for CapiAna ranged between 25 and 35min versus 80 and 95min for the manual counting procedure. We have developed a semi-automatic image analysis application (CapiAna) for the assessment of skin capillary density, which agrees well with the classic manual counting procedure, is time-saving, and has a better reproducibility as compared to the classic manual counting procedure. As a result, the use of skin capillaroscopy is feasible in large-scale studies, which importantly extends the possibilities to perform microcirculation research in humans. © 2013.

A scaling procedure for the response of an isolated system with high modal overlap factor

NASA Astrophysics Data System (ADS)

De Rosa, S.; Franco, F.

2008-10-01

The paper deals with a numerical approach that reduces some physical sizes of the solution domain to compute the dynamic response of an isolated system: it has been named Asymptotical Scaled Modal Analysis (ASMA). The proposed numerical procedure alters the input data needed to obtain the classic modal responses to increase the frequency band of validity of the discrete or continuous coordinates model through the definition of a proper scaling coefficient. It is demonstrated that the computational cost remains acceptable while the frequency range of analysis increases. Moreover, with reference to the flexural vibrations of a rectangular plate, the paper discusses the ASMA vs. the statistical energy analysis and the energy distribution approach. Some insights are also given about the limits of the scaling coefficient. Finally it is shown that the linear dynamic response, predicted with the scaling procedure, has the same quality and characteristics of the statistical energy analysis, but it can be useful when the system cannot be solved appropriately by the standard Statistical Energy Analysis (SEA).

Grindability determination of torrefied biomass materials using the Hybrid Work index

DOE Office of Scientific and Technical Information (OSTI.GOV)

Van Essendelft, D.T.; Zhou, X.; Kang, B.S.-J.

2012-01-01

The grindability of torrefied biomass materials is a difficult parameter to evaluate due to its inhomogeneous character and non-uniform morphology. However, it is necessary to develop a grinding test that is representative of the wide ranging character of biomass and torrefied biomass materials. Previous research has shown that Resistance to Impact Milling (RIM) can be linearly correlated to thermally driven weight loss in biomass. In particular, the RIM equipment was found to supply the right energy level to physically break down structurally deficient biomass materials while leaving the un-touched material relatively intact [1–3]. However, the RIM procedure was not designedmore » to extract the comminution energy. Alternatively, the Bond Work Index (BWI) procedure was developed to accurately assess the grinding energy of brittle materials [4,5]. However, the milling energy is too low to be effective for biomass comminution. In this research, the BWI procedure was utilized with the ball–mill approach in the RIM test to evaluate torrefied biomass materials. The hybridized procedure has been shown to be both highly correlated to energy consumption and sensitive to degree of torrefaction. The proposed Hybrid Work Index (HWI) is certainly useful for assessing torrefaction in a laboratory environment, but it may also be correlated to grinding energy at industrial scales.« less

Intra-opeartive OCT imaging and sensing devices for clinical translation (Conference Presentation)

NASA Astrophysics Data System (ADS)

Chen, Yu

2017-02-01

Stereotactic procedures that require insertion of needle-based instruments into the brain serve important roles in a variety of neurosurgical interventions, such as biopsy, catheterization, and electrode placement. A fundamental limitation of these stereotactic procedures is that they are blind procedures in that the operator does not have real-time feedback as to what lies immediately ahead of the advancing needle. Therefore, there is a great clinical need to navigate the instrument safely and accurately to the targets. Towards that end, we developed a forwarding-imaging needle-type optical coherence tomography (OCT) probe for avoiding the hemorrhage and guiding neurosurgical interventions. The needle probe has a thin diameter of 0.7 mm. The feasibility of vessel detection and neurosurgical guidance were demonstrated on sheep brain in vivo and human brain ex vivo. In addition, we further reduced the probe size to 0.3 mm using an optical Doppler sensing (ODS) fiber probe that can integrate with microelectrode recording (MER) to detect the blood vessels lying ahead to improve the safety of this procedure. Furthermore, to overcome the field-of-view limitation of OCT probe, we developed an MRI-compatible OCT imaging probe for neurosurgery. MRI/OCT multi-scale imaging integrates micro-resolution optical imaging with wide-field MRI imaging, and has potential to further improve the targeting accuracy.

Isolation of Microarray-Grade Total RNA, MicroRNA, and DNA from a Single PAXgene Blood RNA Tube

PubMed Central

Kruhøffer, Mogens; Dyrskjøt, Lars; Voss, Thorsten; Lindberg, Raija L.P.; Wyrich, Ralf; Thykjaer, Thomas; Orntoft, Torben F.

2007-01-01

We have developed a procedure for isolation of microRNA and genomic DNA in addition to total RNA from whole blood stabilized in PAXgene Blood RNA tubes. The procedure is based on automatic extraction on a BioRobot MDx and includes isolation of DNA from a fraction of the stabilized blood and recovery of small RNA species that are otherwise lost. The procedure presented here is suitable for large-scale experiments and is amenable to further automation. Procured total RNA and DNA was tested using Affymetrix Expression and single-nucleotide polymorphism GeneChips, respectively, and isolated microRNA was tested using spotted locked nucleic acid-based microarrays. We conclude that the yield and quality of total RNA, microRNA, and DNA from a single PAXgene blood RNA tube is sufficient for downstream microarray analysis. PMID:17690207

A simple Lagrangian forecast system with aviation forecast potential

NASA Technical Reports Server (NTRS)

Petersen, R. A.; Homan, J. H.

1983-01-01

A trajectory forecast procedure is developed which uses geopotential tendency fields obtained from a simple, multiple layer, potential vorticity conservative isentropic model. This model can objectively account for short-term advective changes in the mass field when combined with fine-scale initial analyses. This procedure for producing short-term, upper-tropospheric trajectory forecasts employs a combination of a detailed objective analysis technique, an efficient mass advection model, and a diagnostically proven trajectory algorithm, none of which require extensive computer resources. Results of initial tests are presented, which indicate an exceptionally good agreement for trajectory paths entering the jet stream and passing through an intensifying trough. It is concluded that this technique not only has potential for aiding in route determination, fuel use estimation, and clear air turbulence detection, but also provides an example of the types of short range forecasting procedures which can be applied at local forecast centers using simple algorithms and a minimum of computer resources.

Safety climate and the distracted driving experiences of truck drivers.

PubMed

Swedler, David I; Pollack, Keshia M; Agnew, Jacqueline

2015-07-01

For truck drivers, distracted driving is a workplace behavior that increases occupational injury risk. We propose safety climate as an appropriate lens through which researchers can examine occupational distracted driving. Using a mixed methods study design, we surveyed truck drivers using the Safety Climate Questionnaire (SCQ) complemented by semi-structured interviews of experts on distracted driving and truck safety. Safety climate was assessed by using the entire SCQ as an overall climate score, followed by factor analysis that identified the following safety climate factors: Communications and Procedures; Management Commitment; and Work Pressure. In multivariate regression, the overall safety climate scale was associated with having ever experienced a crash and/or distraction-involved swerving. Interview participants described how these SCQ constructs could affect occupational distracted driving. To reduce distraction-related crashes in their organizations, management can adhere to safe policies and procedures, invest in engineering controls, and develop safer communication procedures. © 2015 Wiley Periodicals, Inc.

Computer modelling of cyclic deformation of high-temperature materials. Technical progress report, 16 November 1992-15 February 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duesbery, M.S.

1993-02-26

This program aims at improving current methods of lifetime assessment by building in the characteristics of the micro-mechanisms known to be responsible for damage and failure. The broad approach entails the integration and, where necessary, augmentation of the micro-scale research results currently available in the literature into a macro-scale model with predictive capability. In more detail, the program will develop a set of hierarchically structured models at different length scales, from atomic to macroscopic, at each level taking as parametric input the results of the model at the next smaller scale. In this way the known microscopic properties can bemore » transported by systematic procedures to the unknown macro-scale region. It may not be possible to eliminate empiricism completely, because some of the quantities involved cannot yet be estimated to the required degree of precision. In this case the aim will be at least to eliminate functional empiricism.« less

Item Response Theory Applied to Factors Affecting the Patient Journey Towards Hearing Rehabilitation

PubMed Central

Chenault, Michelene; Berger, Martijn; Kremer, Bernd; Anteunis, Lucien

2016-01-01

To develop a tool for use in hearing screening and to evaluate the patient journey towards hearing rehabilitation, responses to the hearing aid rehabilitation questionnaire scales aid stigma, pressure, and aid unwanted addressing respectively hearing aid stigma, experienced pressure from others; perceived hearing aid benefit were evaluated with item response theory. The sample was comprised of 212 persons aged 55 years or more; 63 were hearing aid users, 64 with and 85 persons without hearing impairment according to guidelines for hearing aid reimbursement in the Netherlands. Bias was investigated relative to hearing aid use and hearing impairment within the differential test functioning framework. Items compromising model fit or demonstrating differential item functioning were dropped. The aid stigma scale was reduced from 6 to 4, the pressure scale from 7 to 4, and the aid unwanted scale from 5 to 4 items. This procedure resulted in bias-free scales ready for screening purposes and application to further understand the help-seeking process of the hearing impaired. PMID:28028428

Development of a gene synthesis platform for the efficient large scale production of small genes encoding animal toxins.

PubMed

Sequeira, Ana Filipa; Brás, Joana L A; Guerreiro, Catarina I P D; Vincentelli, Renaud; Fontes, Carlos M G A

2016-12-01

Gene synthesis is becoming an important tool in many fields of recombinant DNA technology, including recombinant protein production. De novo gene synthesis is quickly replacing the classical cloning and mutagenesis procedures and allows generating nucleic acids for which no template is available. In addition, when coupled with efficient gene design algorithms that optimize codon usage, it leads to high levels of recombinant protein expression. Here, we describe the development of an optimized gene synthesis platform that was applied to the large scale production of small genes encoding venom peptides. This improved gene synthesis method uses a PCR-based protocol to assemble synthetic DNA from pools of overlapping oligonucleotides and was developed to synthesise multiples genes simultaneously. This technology incorporates an accurate, automated and cost effective ligation independent cloning step to directly integrate the synthetic genes into an effective Escherichia coli expression vector. The robustness of this technology to generate large libraries of dozens to thousands of synthetic nucleic acids was demonstrated through the parallel and simultaneous synthesis of 96 genes encoding animal toxins. An automated platform was developed for the large-scale synthesis of small genes encoding eukaryotic toxins. Large scale recombinant expression of synthetic genes encoding eukaryotic toxins will allow exploring the extraordinary potency and pharmacological diversity of animal venoms, an increasingly valuable but unexplored source of lead molecules for drug discovery.

Preliminary development of the adolescent students' basic psychological needs at school scale.

PubMed

Tian, Lili; Han, Mengmeng; Huebner, E Scott

2014-04-01

The aim of the present study was to develop and provide evidence for the validity of a new measure of adolescent students' psychological need satisfaction at school, using a sample of Chinese students. We conducted four studies with four independent samples (total n = 1872). The first study aimed to develop items for the new instrument and to ascertain its factorial structure using exploratory factor analysis procedures. The second study aimed to examine the instrument's factorial structure using confirmatory factor analysis procedures as well as to assess its internal consistency reliability, convergent and divergent validity. The third study aimed to assess its measurement invariance across gender and age. The fourth study aimed to test its test-retest reliability over time and predictive validity. These preliminary results showed that the new instrument has promising psychometric properties. The potential contributions of the new instrument for future research and educational practices were discussed. Copyright © 2014 The Foundation for Professionals in Services for Adolescents. Published by Elsevier Ltd. All rights reserved.

Full-scale transmission testing to evaluate advanced lubricants

NASA Technical Reports Server (NTRS)

Lewicki, David G.; Decker, Harry J.; Shimski, John T.

1992-01-01

Experimental tests were performed on the OH-58A helicopter main rotor transmission in the NASA Lewis 500 hp helicopter transmission test stand. The testing was part of a lubrication program. The objectives are to develop and show a separate lubricant for gearboxes with improved performance in life and load carrying capacity. The goal was to develop a testing procedure to fail certain transmission components using a MIL-L-23699 based reference oil and then to run identical tests with improved lubricants and show improved performance. The tests were directed at parts that failed due to marginal lubrication from Navy field experience. These failures included mast shaft bearing micropitting, sun gear and planet bearing fatigue, and spiral bevel gear scoring. A variety of tests were performed and over 900 hrs of total run time accumulated for these tests. Some success was achieved in developing a testing procedure to produce sun gear and planet bearing fatigue failures. Only marginal success was achieved in producing mast shaft bearing micropitting and spiral bevel gear scoring.

Improving Healthcare Transition Planning and Health-Related Independence for Youth with ASD and their Families

DTIC Science & Technology

2015-10-01

volunteers) recruited Objective 5: Develop and test focus group & individual interview guide; train staff on protocol and procedure • Caregiver and young...and individual items will then be evaluated and revised based on finds from cognitive interviewing and full-scale pretesting . 15. SUBJECT TERMS...first modality assessed caregiver perspectives on health-related transitioning using focus groups . The second modality included individual interviews

Improving Preschool Teachers Attitude towards the Persona Doll Approach and Determining the Effectiveness of Persona Doll Training Procedures

ERIC Educational Resources Information Center

Acar, Ebru Aktan; Çetin, Hilal

2017-01-01

The study features two basic steps. The first step of the research aims to develop a scale to measure the attitude of preschool teachers towards the Persona Dolls Approach and to verify its validity/reliability through a general survey. The cohort employed in the research was drawn from a pool of preschool teachers working in and around the cities…

Variability in the American Society of Anesthesiologists (ASA) Physical Status (PS) Classifcation Scale

DTIC Science & Technology

1999-10-01

instrument, and was deemed unsuitable because it was altered by several variables (patient condition, planned surgical procedure, experience and skill...index of anesthetic risk could be developed. Variables in addition to the patient physical status ( experience of the surgeon, anesthetist, and hospital...and other concurrent illnesses), but also by risk inherent to the specific surgery. Surgical risks include experience of the surgical team, the

Relationship between affective determinants and achievement in science for seventeen-year-olds

NASA Astrophysics Data System (ADS)

Napier, John D.; Riley, Joseph P.

Data collected in the 1976-1977 NAEP survey of seventeen-year-olds was used to reanalyze the hypothesis that there are affective determinates of science achievement. Factor and item analysis procedures were used to examine affective and cognitive items from Booklet 4. Eight affective scales and one cognitive achievement scale were identified. Using stepwise multiple regression procedures, the four affective scales of Motivation, Anxiety, Student Choice, and Teacher Support were found to account for the majority of the correlation between the affective determinants and achievement.

Containment of composite fan blades

NASA Technical Reports Server (NTRS)

Stotler, C. L.; Coppa, A. P.

1979-01-01

A lightweight containment was developed for turbofan engine fan blades. Subscale ballistic-type tests were first run on a number of concepts. The most promising configuration was selected and further evaluated by larger scale tests in a rotating test rig. Weight savings made possible by the use of this new containment system were determined and extrapolated to a CF6-size engine. An analytical technique was also developed to predict the released blades motion when involved in the blade/casing interaction process. Initial checkout of this procedure was accomplished using several of the tests run during the program.

Habitat Suitability Index Models: Red king crab

USGS Publications Warehouse

Jewett, Stephen C.; Onuf, Christopher P.

1988-01-01

A review and synthesis of existing information were used to develop a Habitat Suitability Index (HSI) model for evaluating habitat of different life stages of red king crab (Paralithodes camtschatica). A model consolidates habitat use information into a framework appropriate for field application, and is scaled to produce an index between 0.0 (unsuitable habitat) and 1.0 (optimum habitat) in Alaskan coastal waters, especially in the Gulf of Alaska and the southeastern Bering Sea. HSI models are designed to be used with Habitat Evaluation Procedures previously developed by the U.S. Fish and Wildlife Service.

Developing Physiologic Models for Emergency Medical Procedures Under Microgravity

NASA Technical Reports Server (NTRS)

Parker, Nigel; O'Quinn, Veronica

2012-01-01

Several technological enhancements have been made to METI's commercial Emergency Care Simulator (ECS) with regard to how microgravity affects human physiology. The ECS uses both a software-only lung simulation, and an integrated mannequin lung that uses a physical lung bag for creating chest excursions, and a digital simulation of lung mechanics and gas exchange. METI s patient simulators incorporate models of human physiology that simulate lung and chest wall mechanics, as well as pulmonary gas exchange. Microgravity affects how O2 and CO2 are exchanged in the lungs. Procedures were also developed to take into affect the Glasgow Coma Scale for determining levels of consciousness by varying the ECS eye-blinking function to partially indicate the level of consciousness of the patient. In addition, the ECS was modified to provide various levels of pulses from weak and thready to hyper-dynamic to assist in assessing patient conditions from the femoral, carotid, brachial, and pedal pulse locations.

Developing Physiologic Models for Emergency Medical Procedures Under Microgravity

NASA Technical Reports Server (NTRS)

Parker, Nigel; OQuinn, Veronica

2012-01-01

Several technological enhancements have been made to METI's commercial Emergency Care Simulator (ECS) with regard to how microgravity affects human physiology. The ECS uses both a software-only lung simulation, and an integrated mannequin lung that uses a physical lung bag for creating chest excursions, and a digital simulation of lung mechanics and gas exchange. METI's patient simulators incorporate models of human physiology that simulate lung and chest wall mechanics, as well as pulmonary gas exchange. Microgravity affects how O2 and CO2 are exchanged in the lungs. Procedures were also developed to take into affect the Glasgow Coma Scale for determining levels of consciousness by varying the ECS eye-blinking function to partially indicate the level of consciousness of the patient. In addition, the ECS was modified to provide various levels of pulses from weak and thready to hyper-dynamic to assist in assessing patient conditions from the femoral, carotid, brachial, and pedal pulse locations.

Investigation of electroforming techniques. [fabrication of regeneratively cooled thrust chambers

NASA Technical Reports Server (NTRS)

Malone, G. A.

1975-01-01

Copper and nickel electroforming was examined for the purpose of establishing the necessary processes and procedures for repeatable, successful fabrication of the outer structures of regeneratively cooled thrust chambers. The selection of electrolytes for copper and nickel deposition is described. The development studies performed to refine and complete the processes necessary for successful chamber shell fabrication and the testing employed to verify the applicability of the processes and procedures to small scale hardware are described. Specifications were developed to afford a guideline for the electroforming of high quality outer shells on regeneratively cooled thrust chamber liners. Test results indicated repeatable mechanical properties could be produced in copper deposits from the copper sulfate electrolyte with periodic current reversal and in nickel deposits from the sulfamate solution. Use of inert, removable channel fillers and the conductivizing of such is described. Techniques (verified by test) which produce high integrity bonds to copper and copper alloy liners are discussed.

Studies of fly ash using thermal analysis techniques

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Hanxu; Shen, Xiang-Zhong; Sisk, B.

1996-12-31

Improved thermoanalytical methods have been developed that are capable of quantitative identification of various components of fly ash from a laboratory-scale fluidized bed combustion system. The thermogravimetric procedure developed can determine quantities of H{sub 2}O, Ca(OH){sub 2}, CaCO{sub 3}, CaSO{sub 4} and carbonaceous matter in fly ash with accuracy comparable to more time-consuming ASTM methods. This procedure is a modification of the Mikhail-Turcotte methods that can accurately analyze bed ash, with higher accuracy regarding the greater amount of carbonaceous matter in fly ash. In addition, in conjunction with FTIR and SEM/EDS analysis, the reduction mechanism of CaSO{sub 4} as CaSO{submore » 4} + 4H{sub 2} = CaS + 4H{sub 2}O has been confirmed in this study. This mechanism is important in analyzing and evaluating sulfur capture in fluidized-bed combustion systems.« less

Matched asymptotic expansion of the Hamilton-Jacobi-Bellman equation for aeroassisted plane-change maneuvers

NASA Technical Reports Server (NTRS)

Calise, Anthony J.; Melamed, Nahum

1993-01-01

In this paper we develop a general procedure for constructing a matched asymptotic expansion of the Hamilton-Jacobi-Bellman equation based on the method of characteristics. The development is for a class of perturbation problems whose solution exhibits two-time-scale behavior. A regular expansion for problems of this type is inappropriate since it is not uniformly valid over a narrow range of the independent variable. Of particular interest here is the manner in which matching and boundary conditions are enforced when the expansion is carried out to first order. Two cases are distinguished - one where the left boundary condition coincides with or lies to the right of the singular region and one where the left boundary condition lies to the left of the singular region. A simple example is used to illustrate the procedure, and its potential application to aeroassisted plane change is described.

Using Hybrid Techniques for Generating Watershed-scale Flood Models in an Integrated Modeling Framework

NASA Astrophysics Data System (ADS)

Saksena, S.; Merwade, V.; Singhofen, P.

2017-12-01

There is an increasing global trend towards developing large scale flood models that account for spatial heterogeneity at watershed scales to drive the future flood risk planning. Integrated surface water-groundwater modeling procedures can elucidate all the hydrologic processes taking part during a flood event to provide accurate flood outputs. Even though the advantages of using integrated modeling are widely acknowledged, the complexity of integrated process representation, computation time and number of input parameters required have deterred its application to flood inundation mapping, especially for large watersheds. This study presents a faster approach for creating watershed scale flood models using a hybrid design that breaks down the watershed into multiple regions of variable spatial resolution by prioritizing higher order streams. The methodology involves creating a hybrid model for the Upper Wabash River Basin in Indiana using Interconnected Channel and Pond Routing (ICPR) and comparing the performance with a fully-integrated 2D hydrodynamic model. The hybrid approach involves simplification procedures such as 1D channel-2D floodplain coupling; hydrologic basin (HUC-12) integration with 2D groundwater for rainfall-runoff routing; and varying spatial resolution of 2D overland flow based on stream order. The results for a 50-year return period storm event show that hybrid model (NSE=0.87) performance is similar to the 2D integrated model (NSE=0.88) but the computational time is reduced to half. The results suggest that significant computational efficiency can be obtained while maintaining model accuracy for large-scale flood models by using hybrid approaches for model creation.

Virtual Simulation in Enhancing Procedural Training for Fluoroscopy-guided Lumbar Puncture: A Pilot Study.

PubMed

Ali, Saad; Qandeel, Monther; Ramakrishna, Rishi; Yang, Carina W

2018-02-01

Fluoroscopy-guided lumbar puncture (FGLP) is a basic procedural component of radiology residency and neuroradiology fellowship training. Performance of the procedure with limited experience is associated with increased patient discomfort as well as increased radiation dose, puncture attempts, and complication rate. Simulation in health care is a developing field that has potential for enhancing procedural training. We demonstrate the design and utility of a virtual reality simulator for performing FGLP. An FGLP module was developed on an ImmersiveTouch platform, which digitally reproduces the procedural environment with a hologram-like projection. From computed tomography datasets of healthy adult spines, we constructed a 3-D model of the lumbar spine and overlying soft tissues. We assigned different physical characteristics to each tissue type, which the user can experience through haptic feedback while advancing a virtual spinal needle. Virtual fluoroscopy as well as 3-D images can be obtained for procedural planning and guidance. The number of puncture attempts, the distance to the target, the number of fluoroscopic shots, and the approximate radiation dose can be calculated. Preliminary data from users who participated in the simulation were obtained in a postsimulation survey. All users found the simulation to be a realistic replication of the anatomy and procedure and would recommend to a colleague. On a scale of 1-5 (lowest to highest) rating the virtual simulator training overall, the mean score was 4.3 (range 3-5). We describe the design of a virtual reality simulator for performing FGLP and present the initial experience with this new technique. Copyright © 2018 The Association of University Radiologists. Published by Elsevier Inc. All rights reserved.

Reverse-Time Imaging Based on Full-Waveform Inverted Velocity Model for Nondestructive Testing of Heterogeneous Engineered Structures

NASA Astrophysics Data System (ADS)

Nguyen, L. T.; Modrak, R. T.; Saenger, E. H.; Tromp, J.

2017-12-01

Reverse-time migration (RTM) can reconstruct reflectors and scatterers by cross-correlating the source wavefield and the receiver wavefield given a known velocity model of the background. In nondestructive testing, however, the engineered structure under inspection is often composed of layers of various materials and the background material has been degraded non-uniformly because of environmental or operational effects. On the other hand, ultrasonic waveform tomography based on the principles of full-waveform inversion (FWI) has succeeded in detecting anomalous features in engineered structures. But the building of the wave velocity model of the comprehensive small-size and high-contrast defect(s) is difficult because it requires computationally expensive high-frequency numerical wave simulations and an accurate understanding of large-scale background variations of the engineered structure.To reduce computational cost and improve detection of small defects, a useful approach is to divide the waveform tomography procedure into two steps: first, a low-frequency model-building step aimed at recovering background structure using FWI, and second, a high-frequency imaging step targeting defects using RTM. Through synthetic test cases, we show that the two-step procedure appears more promising in most cases than a single-step inversion. In particular, we find that the new workflow succeeds in the challenging scenario where the defect lies along preexisting layer interface in a composite bridge deck and in related experiments involving noisy data or inaccurate source parameters. The results reveal the potential of the new wavefield imaging method and encourage further developments in data processing, enhancing computation power, and optimizing the imaging workflow itself so that the procedure can efficiently be applied to geometrically complex 3D solids and waveguides. Lastly, owing to the scale invariance of the elastic wave equation, this imaging procedure can be transferred to applications in regional scales as well.

Effect of music care on depression and behavioral problems in elderly people with dementia in Taiwan: a quasi-experimental, longitudinal study.

PubMed

Wang, Su-Chin; Yu, Ching-Len; Chang, Su-Hsien

2017-02-01

The purpose was to examine the effectiveness of music care on cognitive function, depression, and behavioral problems among elderly people with dementia in long-term care facilities in Taiwan. The study had a quasi-experimental, longitudinal research design and used two groups of subjects. Subjects were not randomly assigned to experimental group (n = 90) or comparison group (n = 56). Based on Bandura's social cognition theory, subjects in the experimental group received Kagayashiki music care (KMC) twice per week for 24 weeks. Subjects in the comparison group were provided with activities as usual. Results found, using the control score of the Clifton Assessment Procedures for the Elderly Behavior Rating Scale (baseline) and time of attending KMC activities as a covariate, the two groups of subjects had statistically significant differences in the mini-mental state examination (MMSE). Results also showed that, using the control score of the Cornell Scale for Depression in Dementia (baseline) and MMSE (baseline) as a covariate, the two groups of subjects had statistically significant differences in the Clifton Assessment Procedures for the Elderly Behavior Rating Scale. These findings provide information for staff caregivers in long-term care facilities to develop a non-invasive care model for elderly people with dementia to deal with depression, anxiety, and behavioral problems.

Effects of reservoir heterogeneity on scaling of effective mass transfer coefficient for solute transport

NASA Astrophysics Data System (ADS)

Leung, Juliana Y.; Srinivasan, Sanjay

2016-09-01

Modeling transport process at large scale requires proper scale-up of subsurface heterogeneity and an understanding of its interaction with the underlying transport mechanisms. A technique based on volume averaging is applied to quantitatively assess the scaling characteristics of effective mass transfer coefficient in heterogeneous reservoir models. The effective mass transfer coefficient represents the combined contribution from diffusion and dispersion to the transport of non-reactive solute particles within a fluid phase. Although treatment of transport problems with the volume averaging technique has been published in the past, application to geological systems exhibiting realistic spatial variability remains a challenge. Previously, the authors developed a new procedure where results from a fine-scale numerical flow simulation reflecting the full physics of the transport process albeit over a sub-volume of the reservoir are integrated with the volume averaging technique to provide effective description of transport properties. The procedure is extended such that spatial averaging is performed at the local-heterogeneity scale. In this paper, the transport of a passive (non-reactive) solute is simulated on multiple reservoir models exhibiting different patterns of heterogeneities, and the scaling behavior of effective mass transfer coefficient (Keff) is examined and compared. One such set of models exhibit power-law (fractal) characteristics, and the variability of dispersion and Keff with scale is in good agreement with analytical expressions described in the literature. This work offers an insight into the impacts of heterogeneity on the scaling of effective transport parameters. A key finding is that spatial heterogeneity models with similar univariate and bivariate statistics may exhibit different scaling characteristics because of the influence of higher order statistics. More mixing is observed in the channelized models with higher-order continuity. It reinforces the notion that the flow response is influenced by the higher-order statistical description of heterogeneity. An important implication is that when scaling-up transport response from lab-scale results to the field scale, it is necessary to account for the scale-up of heterogeneity. Since the characteristics of higher-order multivariate distributions and large-scale heterogeneity are typically not captured in small-scale experiments, a reservoir modeling framework that captures the uncertainty in heterogeneity description should be adopted.

Green Chemistry Metrics with Special Reference to Green Analytical Chemistry.

PubMed

Tobiszewski, Marek; Marć, Mariusz; Gałuszka, Agnieszka; Namieśnik, Jacek

2015-06-12

The concept of green chemistry is widely recognized in chemical laboratories. To properly measure an environmental impact of chemical processes, dedicated assessment tools are required. This paper summarizes the current state of knowledge in the field of development of green chemistry and green analytical chemistry metrics. The diverse methods used for evaluation of the greenness of organic synthesis, such as eco-footprint, E-Factor, EATOS, and Eco-Scale are described. Both the well-established and recently developed green analytical chemistry metrics, including NEMI labeling and analytical Eco-scale, are presented. Additionally, this paper focuses on the possibility of the use of multivariate statistics in evaluation of environmental impact of analytical procedures. All the above metrics are compared and discussed in terms of their advantages and disadvantages. The current needs and future perspectives in green chemistry metrics are also discussed.

Genetic engineering approach to toxic waste management: case study for organophosphate waste treatment.

PubMed

Coppella, S J; DelaCruz, N; Payne, G F; Pogell, B M; Speedie, M K; Karns, J S; Sybert, E M; Connor, M A

1990-01-01

Currently, there has been limited use of genetic engineering for waste treatment. In this work, we are developing a procedure for the in situ treatment of toxic organophosphate wastes using the enzyme parathion hydrolase. Since this strategy is based on the use of an enzyme and not viable microorganisms, recombinant DNA technology could be used without the problems associated with releasing genetically altered microorganisms into the environment. The gene coding for parathion hydrolase was cloned into a Streptomyces lividans, and this transformed bacterium was observed to express and excrete this enzyme. Subsequently, fermentation conditions were developed to enhance enzyme production, and this fermentation was scaled-up to the pilot scale. The cell-free culture fluid (i.e., a nonpurified enzyme solution) was observed to be capable of effectively hydrolyzing organophosphate compounds under laboratory and simulated in situ conditions.

NASA/FAA general aviation crash dynamics program - An update

NASA Technical Reports Server (NTRS)

Hayduk, R. J.; Thomson, R. G.; Carden, H. D.

1979-01-01

Work in progress in the NASA/FAA General Aviation Crash Dynamics Program for the development of technology for increased crash-worthiness and occupant survivability of general aviation aircraft is presented. Full-scale crash testing facilities and procedures are outlined, and a chronological summary of full-scale tests conducted and planned is presented. The Plastic and Large Deflection Analysis of Nonlinear Structures and Modified Seat Occupant Model for Light Aircraft computer programs which form part of the effort to predict nonlinear geometric and material behavior of sheet-stringer aircraft structures subjected to large deformations are described, and excellent agreement between simulations and experiments is noted. The development of structural concepts to attenuate the load transmitted to the passenger through the seats and subfloor structure is discussed, and an apparatus built to test emergency locator transmitters in a realistic environment is presented.

Development of the Assessment of Belief Conflict in Relationship-14 (ABCR-14)

PubMed Central

Kyougoku, Makoto; Teraoka, Mutsumi; Masuda, Noriko; Ooura, Mariko; Abe, Yasushi

2015-01-01

Purpose Nurses and other healthcare workers frequently experience belief conflict, one of the most important, new stress-related problems in both academic and clinical fields. Methods In this study, using a sample of 1,683 nursing practitioners, we developed The Assessment of Belief Conflict in Relationship-14 (ABCR-14), a new scale that assesses belief conflict in the healthcare field. Standard psychometric procedures were used to develop and test the scale, including a qualitative framework concept and item-pool development, item reduction, and scale development. We analyzed the psychometric properties of ABCR-14 according to entropy, polyserial correlation coefficient, exploratory factor analysis, confirmatory factor analysis, average variance extracted, Cronbach’s alpha, Pearson product-moment correlation coefficient, and multidimensional item response theory (MIRT). Results The results of the analysis supported a three-factor model consisting of 14 items. The validity and reliability of ABCR-14 was suggested by evidence from high construct validity, structural validity, hypothesis testing, internal consistency reliability, and concurrent validity. The result of the MIRT offered strong support for good item response of item slope parameters and difficulty parameters. However, the ABCR-14 Likert scale might need to be explored from the MIRT point of view. Yet, as mentioned above, there is sufficient evidence to support that ABCR-14 has high validity and reliability. Conclusion The ABCR-14 demonstrates good psychometric properties for nursing belief conflict. Further studies are recommended to confirm its application in clinical practice. PMID:26247356

A review of downscaling procedures - a contribution to the research on climate change impacts at city scale

NASA Astrophysics Data System (ADS)

Smid, Marek; Costa, Ana; Pebesma, Edzer; Granell, Carlos; Bhattacharya, Devanjan

2016-04-01

Human kind is currently predominantly urban based, and the majority of ever continuing population growth will take place in urban agglomerations. Urban systems are not only major drivers of climate change, but also the impact hot spots. Furthermore, climate change impacts are commonly managed at city scale. Therefore, assessing climate change impacts on urban systems is a very relevant subject of research. Climate and its impacts on all levels (local, meso and global scale) and also the inter-scale dependencies of those processes should be a subject to detail analysis. While global and regional projections of future climate are currently available, local-scale information is lacking. Hence, statistical downscaling methodologies represent a potentially efficient way to help to close this gap. In general, the methodological reviews of downscaling procedures cover the various methods according to their application (e.g. downscaling for the hydrological modelling). Some of the most recent and comprehensive studies, such as the ESSEM COST Action ES1102 (VALUE), use the concept of Perfect Prog and MOS. Other examples of classification schemes of downscaling techniques consider three main categories: linear methods, weather classifications and weather generators. Downscaling and climate modelling represent a multidisciplinary field, where researchers from various backgrounds intersect their efforts, resulting in specific terminology, which may be somewhat confusing. For instance, the Polynomial Regression (also called the Surface Trend Analysis) is a statistical technique. In the context of the spatial interpolation procedures, it is commonly classified as a deterministic technique, and kriging approaches are classified as stochastic. Furthermore, the terms "statistical" and "stochastic" (frequently used as names of sub-classes in downscaling methodological reviews) are not always considered as synonymous, even though both terms could be seen as identical since they are referring to methods handling input modelling factors as variables with certain probability distributions. In addition, the recent development is going towards multi-step methodologies containing deterministic and stochastic components. This evolution leads to the introduction of new terms like hybrid or semi-stochastic approaches, which makes the efforts to systematically classifying downscaling methods to the previously defined categories even more challenging. This work presents a review of statistical downscaling procedures, which classifies the methods in two steps. In the first step, we describe several techniques that produce a single climatic surface based on observations. The methods are classified into two categories using an approximation to the broadest consensual statistical terms: linear and non-linear methods. The second step covers techniques that use simulations to generate alternative surfaces, which correspond to different realizations of the same processes. Those simulations are essential because there is a limited number of real observational data, and such procedures are crucial for modelling extremes. This work emphasises the link between statistical downscaling methods and the research of climate change impacts at city scale.

U.S. Department of Energy Vehicle Technologies Program: Battery Test Manual For Plug-In Hybrid Electric Vehicles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Christophersen, Jon P.

2014-09-01

This battery test procedure manual was prepared for the United States Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Office. It is based on technical targets for commercial viability established for energy storage development projects aimed at meeting system level DOE goals for Plug-in Hybrid Electric Vehicles (PHEV). The specific procedures defined in this manual support the performance and life characterization of advanced battery devices under development for PHEV’s. However, it does share some methods described in the previously published battery test manual for power-assist hybrid electric vehicles. Due to the complexity of somemore » of the procedures and supporting analysis, future revisions including some modifications and clarifications of these procedures are expected. As in previous battery and capacitor test manuals, this version of the manual defines testing methods for full-size battery systems, along with provisions for scaling these tests for modules, cells or other subscale level devices. The DOE-United States Advanced Battery Consortium (USABC), Technical Advisory Committee (TAC) supported the development of the manual. Technical Team points of contact responsible for its development and revision are Renata M. Arsenault of Ford Motor Company and Jon P. Christophersen of the Idaho National Laboratory. The development of this manual was funded by the Unites States Department of Energy, Office of Energy Efficiency and Renewable Energy, Vehicle Technologies Office. Technical direction from DOE was provided by David Howell, Energy Storage R&D Manager and Hybrid Electric Systems Team Leader. Comments and questions regarding the manual should be directed to Jon P. Christophersen at the Idaho National Laboratory (jon.christophersen@inl.gov).« less

Regional flood frequency analysis in Triveneto (Italy): climate and scale controls

NASA Astrophysics Data System (ADS)

Persiano, Simone; Castellarin, Attilio; Domeneghetti, Alessio; Brath, Armando

2016-04-01

The growing concern about the possible effects of climate change on flood frequency regime is leading Authorities to review previously proposed procedures for design-flood estimation, such as national regionalization approaches. Our study focuses on the Triveneto region, a broad geographical area in North-eastern Italy consisting of the administrative regions of Trentino-Alto Adige, Veneto and Friuli-Venezia Giulia. A reference procedure for design flood estimation in Triveneto is available from the Italian NCR research project "VA.PI.", which developed a regional model using annual maximum series (AMS) of peak discharges that were collected up to the 80s by the former Italian Hydrometeorological Service. We consider a very detailed AMS database that we recently compiled for ~80 catchments located in Triveneto. Our dataset includes the historical data mentioned above, together with more recent data obtained from Regional Services and annual maximum peak streamflows extracted from inflow series to artificial reservoirs and provided by dam managers. All ~80 study catchments are characterized in terms of several geomorphologic and climatic descriptors. The main objectives of our study are: (1) to check whether climatic and scale controls on flood frequency regime in Triveneto are similar to the controls that were recently found in Europe; (2) to verify the possible presence of trends as well as abrupt changes in the intensity and frequency of flood extremes by looking at changes in time of regional L-moments of annual maximum floods; (3) to assess the reliability and representativeness of the reference procedure for design flood estimation relative to flood data that were not included in the VA.PI. dataset (i.e. more recent data collected after the 80s and historical data provided by dam managers); (4) to develop an updated reference procedure for design flood estimation in Triveneto by using a focused-pooling approach (i.e. Region of Influence, RoI).

Required number of records for ASCE/SEI 7 ground-motion scaling procedure

USGS Publications Warehouse

Reyes, Juan C.; Kalkan, Erol

2011-01-01

The procedures and criteria in 2006 IBC (International Council of Building Officials, 2006) and 2007 CBC (International Council of Building Officials, 2007) for the selection and scaling ground-motions for use in nonlinear response history analysis (RHA) of structures are based on ASCE/SEI 7 provisions (ASCE, 2005, 2010). According to ASCE/SEI 7, earthquake records should be selected from events of magnitudes, fault distance, and source mechanisms that comply with the maximum considered earthquake, and then scaled so that the average value of the 5-percent-damped response spectra for the set of scaled records is not less than the design response spectrum over the period range from 0.2Tn to 1.5Tn sec (where Tn is the fundamental vibration period of the structure). If at least seven ground-motions are analyzed, the design values of engineering demand parameters (EDPs) are taken as the average of the EDPs determined from the analyses. If fewer than seven ground-motions are analyzed, the design values of EDPs are taken as the maximum values of the EDPs. ASCE/SEI 7 requires a minimum of three ground-motions. These limits on the number of records in the ASCE/SEI 7 procedure are based on engineering experience, rather than on a comprehensive evaluation. This study statistically examines the required number of records for the ASCE/SEI 7 procedure, such that the scaled records provide accurate, efficient, and consistent estimates of" true" structural responses. Based on elastic-perfectly-plastic and bilinear single-degree-of-freedom systems, the ASCE/SEI 7 scaling procedure is applied to 480 sets of ground-motions. The number of records in these sets varies from three to ten. The records in each set were selected either (i) randomly, (ii) considering their spectral shapes, or (iii) considering their spectral shapes and design spectral-acceleration value, A(Tn). As compared to benchmark (that is, "true") responses from unscaled records using a larger catalog of ground-motions, it is demonstrated that the ASCE/SEI 7 scaling procedure is overly conservative if fewer than seven ground-motions are employed. Utilizing seven or more randomly selected records provides a more accurate estimate of the EDPs accompanied by reduced record-to-record variability of the responses. Consistency in accuracy and efficiency is achieved only if records are selected on the basis of their spectral shape and A(Tn).

Descriptive sensory analysis in different classes of orange juice by a robust free-choice profile method.

PubMed

Pérez Aparicio, Jesús; Toledano Medina, M Angeles; Lafuente Rosales, Victoria

2007-07-09

Free-choice profile (FCP), developed in the 1980s, is a sensory analysis method that can be carried out by untrained panels. The participants need only to be able to use a scale and be consumers of the product under evaluation. The data are analysed by sophisticated statistical methodologies like Generalized Procrustean Analysis (GPA) or STATIS. To facilitate a wider use of the free-choice profiling procedure, different authors have advocated simpler methods based on principal components analysis (PCA) of merged data sets. The purpose of this work was to apply another easy procedure to this type of data by means of a robust PCA. The most important characteristic of the proposed method is that quality responsible managers could use this methodology without any scale evaluation. Only the free terms generated by the assessors are necessary to apply the script, thus avoiding the error associated with scale utilization by inexpert assessors. Also, it is possible to use the application with missing data and with differences in the assessors' attendance at sessions. An example was performed to generate the descriptors from different orange juice types. The results were compared with the STATIS method and with the PCA on the merged data sets. The samples evaluated were fresh orange juices with differences in storage days and pasteurized, concentrated and orange nectar drinks from different brands. Eighteen assessors with a low-level training program were used in a six-session free-choice profile framework. The results proved that this script could be of use in marketing decisions and product quality program development.

Large-scale Isolation of Highly Pure "Untouched" Regulatory T Cells in a GMP Environment for Adoptive Cell Therapy.

PubMed

Haase, Doreen; Puan, Kia Joo; Starke, Mireille; Lai, Tuck Siong; Soh, Melissa Yan Ling; Karunanithi, Iyswariya; San Luis, Boris; Poh, Tuang Yeow; Yusof, Nurhashikin; Yeap, Chun Hsien; Phang, Chew Yen; Chye, Willis Soon Yuan; Chan, Marieta; Koh, Mickey Boon Chai; Goh, Yeow Tee; Bertin-Maghit, Sebastien; Nardin, Alessandra; Ho, Liam Pock; Rotzschke, Olaf

2015-01-01

Adoptive cell therapy is an emerging treatment strategy for a number of serious diseases. Regulatory T (Treg) cells represent 1 cell type of particular interest for therapy of inflammatory conditions, as they are responsible for controlling unwanted immune responses. Initial clinical trials of adoptive transfer of Treg cells in patients with graft-versus-host disease were shown to be safe. However, obtaining sufficient numbers of highly pure and functional Treg cells with minimal contamination remains a challenge. We developed a novel approach to isolate "untouched" human Treg cells from healthy donors on the basis of negative selection using the surface markers CD49d and CD127. This procedure, which uses an antibody cocktail and magnetic beads for separation in an automated system (RoboSep), was scaled up and adapted to be compatible with good manufacturing practice conditions. With this setup we performed 9 Treg isolations from large-scale leukapheresis samples in a good manufacturing practice facility. These runs yielded sufficient numbers of "untouched" Treg cells for immediate use in clinical applications. The cell preparations consisted of viable highly pure FoxP3-positive Treg cells that were functional in suppressing the proliferation of effector T cells. Contamination with CD4 effector T cells was <10%. All other cell types did not exceed 2% in the final product. Remaining isolation reagents were reduced to levels that are considered safe. Treg cells isolated with this procedure will be used in a phase I clinical trial of adoptive transfer into leukemia patients developing graft-versus-host disease after stem cell transplantation.

Air quality: from observation to applied studies

NASA Astrophysics Data System (ADS)

Weber, Christiane H.; Wania, Annett; Hirsch, Jacky; Bruse, Michael

2004-10-01

Air qualities studies in urban areas embrace several directions that are strongly associated with urban complexity. In the last centuries cities evolution implied changes in urbanization trends: urban sprawl has modified the relationship between cities and surroundings settlements. The existence and protection of urban green and open areas is promoted as a mean to improve the quality of life of their citizens and increase the satisfactory level of the inhabitants against pollution and noise adverse effects. This paper outlines the methods and approaches used in the EU research project Benefits of Urban Green Space (BUGS). The main target of BUGS is to assess the role of urban green spaces in alleviating the adverse effects of urbanization trends by developing an integrative methodology, ranging from participatory planning tools to numerical simulation models. The influence of urban structures on atmospheric pollutants distribution is investigated as a multi-scale problem ranging from micro to macro/regional scale. Traditionally, air quality models are applied on a single scale, seldom considering the joint effects of traffic network and urban development together. In BUGS, several numerical models are applied to cope with urban complexity and to provide quantitative and qualitative results. The differing input data requirements for the various models demanded a methodology which ensures a coherent data extraction and application procedure. In this paper, the stepwise procedure used for BUGS is presented after a general presentation of the research project and the models implied. A discussion part will highlight the statements induced by the choices made and a conclusive part bring to the stage some insights for future investigations.

Large scale modulation of high frequency acoustic waves in periodic porous media.

PubMed

Boutin, Claude; Rallu, Antoine; Hans, Stephane

2012-12-01

This paper deals with the description of the modulation at large scale of high frequency acoustic waves in gas saturated periodic porous media. High frequencies mean local dynamics at the pore scale and therefore absence of scale separation in the usual sense of homogenization. However, although the pressure is spatially varying in the pores (according to periodic eigenmodes), the mode amplitude can present a large scale modulation, thereby introducing another type of scale separation to which the asymptotic multi-scale procedure applies. The approach is first presented on a periodic network of inter-connected Helmholtz resonators. The equations governing the modulations carried by periodic eigenmodes, at frequencies close to their eigenfrequency, are derived. The number of cells on which the carrying periodic mode is defined is therefore a parameter of the modeling. In a second part, the asymptotic approach is developed for periodic porous media saturated by a perfect gas. Using the "multicells" periodic condition, one obtains the family of equations governing the amplitude modulation at large scale of high frequency waves. The significant difference between modulations of simple and multiple mode are evidenced and discussed. The features of the modulation (anisotropy, width of frequency band) are also analyzed.

Parents' and Adolescents' Attitudes about Parental Involvement in Clinical Research.

PubMed

Rosenthal, Susan L; de Roche, Ariel M; Catallozzi, Marina; Breitkopf, Carmen Radecki; Ipp, Lisa S; Chang, Jane; Francis, Jenny K R; Hu, Mei-Chen

2016-08-01

To understand parent and adolescent attitudes toward parental involvement during clinical trials and factors related to those attitudes. As part of a study on willingness to participate in a hypothetical microbicide study, adolescents and their parents were interviewed separately. Adolescent medicine clinics in New York City. There were 301 dyads of adolescents (ages 14-17 years; 62% female; 72% Hispanic) and their parents. None. The interview included questions on demographic characteristics, sexual history, and family environment (subscales of the Family Environment Scale) that were associated with attitudes about parental involvement. Factor analysis of the parental involvement scale yielded 2 factors: LEARN, reflecting gaining knowledge about study test results and behaviors (4 items) and PROCEDURE, reflecting enrollment and permissions (4 items). Adolescents endorsed significantly fewer items on the LEARN scale and the PROCEDURE scale indicating that adolescents believed in less parental involvement. There was no significant concordance between adolescents and their own parents on the LEARN scale and the PROCEDURE scale. In final multivariate models predicting attitudes, adolescents who were female and had sexual contact beyond kissing, and non-Hispanic parents had lower LEARN scores. Adolescents who were older, had previous research experience, and reported less moral or religious emphasis in their family had lower PROCEDURE scores; there were no significant predictors for parents in the multivariate analyses. Parents wanted greater involvement in the research process than adolescents. Recruitment and retention might be enhanced by managing these differing expectations. Copyright © 2016 North American Society for Pediatric and Adolescent Gynecology. Published by Elsevier Inc. All rights reserved.

Studing Regional Wave Source Time Functions Using A Massive Automated EGF Deconvolution Procedure

NASA Astrophysics Data System (ADS)

Xie, J. "; Schaff, D. P.

2010-12-01

Reliably estimated source time functions (STF) from high-frequency regional waveforms, such as Lg, Pn and Pg, provide important input for seismic source studies, explosion detection, and minimization of parameter trade-off in attenuation studies. The empirical Green’s function (EGF) method can be used for estimating STF, but it requires a strict recording condition. Waveforms from pairs of events that are similar in focal mechanism, but different in magnitude must be on-scale recorded on the same stations for the method to work. Searching for such waveforms can be very time consuming, particularly for regional waves that contain complex path effects and have reduced S/N ratios due to attenuation. We have developed a massive, automated procedure to conduct inter-event waveform deconvolution calculations from many candidate event pairs. The procedure automatically evaluates the “spikiness” of the deconvolutions by calculating their “sdc”, which is defined as the peak divided by the background value. The background value is calculated as the mean absolute value of the deconvolution, excluding 10 s around the source time function. When the sdc values are about 10 or higher, the deconvolutions are found to be sufficiently spiky (pulse-like), indicating similar path Green’s functions and good estimates of the STF. We have applied this automated procedure to Lg waves and full regional wavetrains from 989 M ≥ 5 events in and around China, calculating about a million deconvolutions. Of these we found about 2700 deconvolutions with sdc greater than 9, which, if having a sufficiently broad frequency band, can be used to estimate the STF of the larger events. We are currently refining our procedure, as well as the estimated STFs. We will infer the source scaling using the STFs. We will also explore the possibility that the deconvolution procedure could complement cross-correlation in a real time event-screening process.

Early diagnostic of concurrent gear degradation processes progressing under time-varying loads

NASA Astrophysics Data System (ADS)

Guilbault, Raynald; Lalonde, Sébastien

2016-08-01

This study develops a gear diagnostic procedure for the detection of multi- and concurrent degradation processes evolving under time-varying loads. Instead of a conventional comparison between a descriptor and an alarm level, this procedure bases its detection strategy on a descriptor evolution tracking; a lasting descriptor increase denotes the presence of ongoing degradation mechanisms. The procedure works from time domain residual signals prepared in the frequency domain, and accepts any gear conditions as reference signature. To extract the load fluctuation repercussions, the procedure integrates a scaling factor. The investigation first examines a simplification assuming a linear connection between the load and the dynamic response amplitudes. However, while generally valuable, the precision losses associated with large load variations may mask the contribution of tiny flaws. To better reflect the real non-linear relation, the paper reformulates the scaling factor; a power law with an exponent value of 0.85 produces noticeable improvements of the load effect extraction. To reduce the consequences of remaining oscillations, the procedure also includes a filtering phase. During the validation program, a synthetic wear progression assuming a commensurate relation between the wear depth and friction assured controlled evolutions of the surface degradation influence, whereas the fillet crack growth remained entirely determined by the operation conditions. Globally, the tested conditions attest that the final strategy provides accurate monitoring of coexisting isolated damages and general surface deterioration, and that its tracking-detection capacities are unaffected by severe time variations of external loads. The procedure promptly detects the presence of evolving abnormal phenomena. The tests show that the descriptor curve shapes virtually describe the constant wear progression superimposed on the crack length evolution. At the tooth fracture, the mean values of the residual signal evince strong perturbations, while after this episode, the monitoring curves continue signaling the ongoing wear process.

Application of historical mobility testing to sensor-based robotic performance

NASA Astrophysics Data System (ADS)

Willoughby, William E.; Jones, Randolph A.; Mason, George L.; Shoop, Sally A.; Lever, James H.

2006-05-01

The USA Engineer Research and Development Center (ERDC) has conducted on-/off-road experimental field testing with full-sized and scale-model military vehicles for more than fifty years. Some 4000 acres of local terrain are available for tailored field evaluations or verification/validation of future robotic designs in a variety of climatic regimes. Field testing and data collection procedures, as well as techniques for quantifying terrain in engineering terms, have been developed and refined into algorithms and models for predicting vehicle-terrain interactions and resulting forces or speeds of military-sized vehicles. Based on recent experiments with Matilda, Talon, and Pacbot, these predictive capabilities appear to be relevant to most robotic systems currently in development. Utilization of current testing capabilities with sensor-based vehicle drivers, or use of the procedures for terrain quantification from sensor data, would immediately apply some fifty years of historical knowledge to the development, refinement, and implementation of future robotic systems. Additionally, translation of sensor-collected terrain data into engineering terms would allow assessment of robotic performance a priori deployment of the actual system and ensure maximum system performance in the theater of operation.

Process metallurgy simulation for metal drawing process optimization by using two-scale finite element method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nakamachi, Eiji; Yoshida, Takashi; Yamaguchi, Toshihiko

2014-10-06

We developed two-scale FE analysis procedure based on the crystallographic homogenization method by considering the hierarchical structure of poly-crystal aluminium alloy metal. It can be characterized as the combination of two-scale structure, such as the microscopic polycrystal structure and the macroscopic elastic plastic continuum. Micro polycrystal structure can be modeled as a three dimensional representative volume element (RVE). RVE is featured as by 3×3×3 eight-nodes solid finite elements, which has 216 crystal orientations. This FE analysis code can predict the deformation, strain and stress evolutions in the wire drawing processes in the macro- scales, and further the crystal texture andmore » hardening evolutions in the micro-scale. In this study, we analyzed the texture evolution in the wire drawing processes by our two-scale FE analysis code under conditions of various drawing angles of dice. We evaluates the texture evolution in the surface and center regions of the wire cross section, and to clarify the effects of processing conditions on the texture evolution.« less

Process metallurgy simulation for metal drawing process optimization by using two-scale finite element method

NASA Astrophysics Data System (ADS)

Nakamachi, Eiji; Yoshida, Takashi; Kuramae, Hiroyuki; Morimoto, Hideo; Yamaguchi, Toshihiko; Morita, Yusuke

2014-10-01

We developed two-scale FE analysis procedure based on the crystallographic homogenization method by considering the hierarchical structure of poly-crystal aluminium alloy metal. It can be characterized as the combination of two-scale structure, such as the microscopic polycrystal structure and the macroscopic elastic plastic continuum. Micro polycrystal structure can be modeled as a three dimensional representative volume element (RVE). RVE is featured as by 3×3×3 eight-nodes solid finite elements, which has 216 crystal orientations. This FE analysis code can predict the deformation, strain and stress evolutions in the wire drawing processes in the macro- scales, and further the crystal texture and hardening evolutions in the micro-scale. In this study, we analyzed the texture evolution in the wire drawing processes by our two-scale FE analysis code under conditions of various drawing angles of dice. We evaluates the texture evolution in the surface and center regions of the wire cross section, and to clarify the effects of processing conditions on the texture evolution.

Financial and testamentary capacity evaluations: procedures and assessment instruments underneath a functional approach.

PubMed

Sousa, Liliana B; Simões, Mário R; Firmino, Horácio; Peisah, Carmelle

2014-02-01

Mental health professionals are frequently involved in mental capacity determinations. However, there is a lack of specific measures and well-defined procedures for these evaluations. The main purpose of this paper is to provide a review of financial and testamentary capacity evaluation procedures, including not only the traditional neuropsychological and functional assessment but also the more recently developed forensic assessment instruments (FAIs), which have been developed to provide a specialized answer to legal systems regarding civil competencies. Here the main guidelines, papers, and other references are reviewed in order to achieve a complete and comprehensive selection of instruments used in the assessment of financial and testamentary capacity. Although some specific measures for financial abilities have been developed recently, the same is not true for testamentary capacity. Here are presented several instruments or methodologies for assessing financial and testamentary capacity, including neuropsychological assessment, functional assessment scales, performance based functional assessment instruments, and specific FAIs. FAIs are the only specific instruments intended to provide a specific and direct answer to the assessment of financial capacity based on legal systems. Considering the need to move from a diagnostic to a functional approach in financial and testamentary capacity evaluations, it is essential to consider both general functional examination as well as cognitive functioning.

Interdisciplinary Development of an Improved Emergency Department Procedural Work Surface Through Iterative Design and Use Testing in Simulated and Clinical Environments.

PubMed

Zhang, Xiao C; Bermudez, Ana M; Reddy, Pranav M; Sarpatwari, Ravi R; Chheng, Darin B; Mezoian, Taylor J; Schwartz, Victoria R; Simmons, Quinneil J; Jay, Gregory D; Kobayashi, Leo

2017-03-01

A stable and readily accessible work surface for bedside medical procedures represents a valuable tool for acute care providers. In emergency department (ED) settings, the design and implementation of traditional Mayo stands and related surface devices often limit their availability, portability, and usability, which can lead to suboptimal clinical practice conditions that may affect the safe and effective performance of medical procedures and delivery of patient care. We designed and built a novel, open-source, portable, bedside procedural surface through an iterative development process with use testing in simulated and live clinical environments. The procedural surface development project was conducted between October 2014 and June 2016 at an academic referral hospital and its affiliated simulation facility. An interdisciplinary team of emergency physicians, mechanical engineers, medical students, and design students sought to construct a prototype bedside procedural surface out of off-the-shelf hardware during a collaborative university course on health care design. After determination of end-user needs and core design requirements, multiple prototypes were fabricated and iteratively modified, with early variants featuring undermattress stabilizing supports or ratcheting clamp mechanisms. Versions 1 through 4 underwent 2 hands-on usability-testing simulation sessions; version 5 was presented at a design critique held jointly by a panel of clinical and industrial design faculty for expert feedback. Responding to select feedback elements over several surface versions, investigators arrived at a near-final prototype design for fabrication and use testing in a live clinical setting. This experimental procedural surface (version 8) was constructed and then deployed for controlled usability testing against the standard Mayo stands in use at the study site ED. Clinical providers working in the ED who opted to participate in the study were provided with the prototype surface and just-in-time training on its use when performing bedside procedures. Subjects completed the validated 10-point System Usability Scale postshift for the surface that they had used. The study protocol was approved by the institutional review board. Multiple prototypes and recursive design revisions resulted in a fully functional, portable, and durable bedside procedural surface that featured a stainless steel tray and intuitive hook-and-lock mechanisms for attachment to ED stretcher bed rails. Forty-two control and 40 experimental group subjects participated and completed questionnaires. The median System Usability Scale score (out of 100; higher scores associated with better usability) was 72.5 (interquartile range [IQR] 51.3 to 86.3) for the Mayo stand; the experimental surface was scored at 93.8 (IQR 84.4 to 97.5 for a difference in medians of 17.5 (95% confidence interval 10 to 27.5). Subjects reported several usability challenges with the Mayo stand; the experimental surface was reviewed as easy to use, simple, and functional. In accordance with experimental live environment deployment, questionnaire responses, and end-user suggestions, the project team finalized the design specification for the experimental procedural surface for open dissemination. An iterative, interdisciplinary approach was used to generate, evaluate, revise, and finalize the design specification for a new procedural surface that met all core end-user requirements. The final surface design was evaluated favorably on a validated usability tool against Mayo stands when use tested in simulated and live clinical settings. Copyright © 2016 American College of Emergency Physicians. Published by Elsevier Inc. All rights reserved.

Propofol-alfentanyl versus midazolam-alfentanyl in inducing procedural amnesia of upper gastrointestinal endoscopy in children--blind randomised trial.

PubMed

Sienkiewicz, Edyta; Albrecht, Piotr; Ziółkowski, Janusz; Dziechciarz, Piotr

2015-11-01

In paediatric patients, esophagogastroduodenoscopy (EGD) is commonly performed with the use of sedation. The aim of the study was to compare the effectiveness of propofol and midazolam in providing procedural amnesia and controlling behaviour in children undergoing diagnostic EGD. Children (9-16 years), classified to the first or second class of the American Society of Anaesthesiologists' physical status classification referred for EGD, were randomly assigned to receive propofol with alfentanyl or midazolam with alfentanyl for sedation during the procedure. Within 120 min after the procedure, patients were repeatedly investigated for memory of the procedure and for memory of pain intensity during EGD with the use of the visual analogue scale. Activity and cooperation of the patient during the procedure was assessed with the relative adequacy scale. Of the 51 children, 48 completed the study. Propofol was significantly better than midazolam in inducing amnesia of procedural pain (mean difference 11.53 mm; 95 % confidence interval [CI] 0.96 to 22.10), loss of memory of the procedure (relative risk 0.4; 95 % CI 0.21 to 0.59) and controlling behaviour (relative risk 2.12; 95 % CI 1.33 to 3.36). In children sedated for EGD, propofol is significantly better than midazolam at providing procedural amnesia and controlling behaviour during the procedure.

Achieving Consistent Doppler Measurements from SDO/HMI Vector Field Inversions

NASA Technical Reports Server (NTRS)

Schuck, Peter W.; Antiochos, S. K.; Leka, K. D.; Barnes, Graham

2016-01-01

NASA's Solar Dynamics Observatory is delivering vector magnetic field observations of the full solar disk with unprecedented temporal and spatial resolution; however, the satellite is in a highly inclined geosynchronous orbit. The relative spacecraft-Sun velocity varies by +/-3 kms-1 over a day, which introduces major orbital artifacts in the Helioseismic Magnetic Imager (HMI) data. We demonstrate that the orbital artifacts contaminate all spatial and temporal scales in the data. We describe a newly developed three-stage procedure for mitigating these artifacts in the Doppler data obtained from the Milne-Eddington inversions in the HMI pipeline. The procedure ultimately uses 32 velocity-dependent coefficients to adjust 10 million pixels-a remarkably sparse correction model given the complexity of the orbital artifacts. This procedure was applied to full-disk images of AR 11084 to produce consistent Dopplergrams. The data adjustments reduce the power in the orbital artifacts by 31 dB. Furthermore, we analyze in detail the corrected images and show that our procedure greatly improves the temporal and spectral properties of the data without adding any new artifacts. We conclude that this new procedure makes a dramatic improvement in the consistency of the HMI data and in its usefulness for precision scientific studies.

Post-surgical infections: prevalence associated with various periodontal surgical procedures.

PubMed

Powell, Charles A; Mealey, Brian L; Deas, David E; McDonnell, Howard T; Moritz, Alan J

2005-03-01

Of the various adverse outcomes that may be encountered following periodontal surgery, the risk of infection stands at the forefront of concern to the surgeon, since infection can lead to morbidity and poor healing outcomes. This paper describes a large-scale retrospective study of multiple surgical modalities in a diverse periodontal practice undertaken to explore the prevalence of clinical infections post-surgically and the relationship between diverse treatment variables and infection rates. A retrospective review of all available periodontal surgical records of patients treated in the Department of Periodontics at Wilford Hall Medical Center, San Antonio, Texas, was conducted. The sample comprised 395 patients and included 1,053 fully documented surgical procedures. Surgical techniques reviewed included osseous resective surgery, flap curettage, distal wedge procedures, gingivectomy, root resection, guided tissue regeneration, dental implant surgery, epithelialized free soft tissue autografts, subepithelial connective tissue autografts, coronally positioned flaps, sinus augmentations, and ridge preservation or augmentation procedures. Infection was defined as increasing and progressive swelling with the presence of suppuration. The impact of various treatment variables was examined including the use of bone grafts, membranes, soft tissue grafts, post-surgical chlorhexidine rinses, systemic antibiotics, and dressings. Results were analyzed using Fisher's exact test and Pearson's chi-square test. Of the 1,053 surgical procedures evaluated in this study, there were a total of 22 infections for an overall prevalence of 2.09%. Patients who received antibiotics as part of the surgical protocol (pre- and/ or post-surgically) developed eight infections in 281 procedures (2.85%) compared to 14 infections in 772 procedures (1.81%) where antibiotics were not used. Procedures in which chlorhexidine was used during post-surgical care had a lower infection rate (17 infections in 900 procedures, 1.89%) compared to procedures after which chlorhexidine was not used as part of post-surgical care (five infections in 153 procedures, 3.27%). The use of a post-surgical dressing demonstrated a slightly higher rate of infection (eight infections in 300 procedures, 2.67%) than non-use of a dressing (14 infections in 753 procedures, 1.86%). Despite these trends, no statistically significant relationship was found between post-surgical infection and any of the treatment variables examined, including the use of perioperative antibiotics. The results of this study confirm previous research demonstrating a low rate of postoperative infection following periodontal surgical procedures. Although perioperative antibiotics are commonly used when performing certain regenerative and implant surgical procedures, data from this and other studies suggest that there may be no benefit in using antibiotics for the sole purpose of preventing post-surgical infections. Further large-scale, controlled clinical studies are warranted to determine the role of perioperative antibiotics in the prevention of periodontal post-surgical infections.

Personal Variation in Preference for Sweetness: Effects of Age and Obesity.

PubMed

Bobowski, Nuala; Mennella, Julie A

2017-10-01

Use of nonnutritive sweeteners (NNSs), which provide sweet taste with few to no calories, has increased, but data on whether children's hedonic responses to NNSs differ from nutritive sugars or from adults' hedonic responses are limited. Most preferred levels of sucrose and the NNS sucralose were determined via a forced-choice tracking procedure in 48 children, 7-14 years (mean = 10 years), and 34 adults. Each participant also rated the liking of these taste stimuli, as well as varying concentrations of aspartame on 3- and 5-point facial hedonic scales. Anthropometric measures were obtained, and motives for palatable food intake were assessed with the Palatable Eating Motives Scale (PEMS, adults) and Kids PEMS. While use of the 3-point scale showed no age-related differences in liking of sweeteners, the 5-point scale showed that more children than adults liked higher concentrations of sucrose, sucralose, and aspartame, and the tracking procedure showed that children most preferred higher concentrations of sucrose and sucralose than adults. Regardless of age, sweet preference did not differ between obese and nonobese participants and showed no association with motives for eating palatable foods. Children's body mass index z-scores were positively associated with social and conformity motive scores for eating palatable foods. Research should move beyond measures of variation in sweet taste hedonics to include identifying motives, and the physiological and psychological consequences of eating sweets, to shed light on what children are more vulnerable to develop unfavorable eating habits, increasing risk for obesity, and other diseases.

USEPA MANUAL OF METHODS FOR VIROLOGY | Science ...

EPA Pesticide Factsheets

This chapter describes procedures for the detection of coliphases in water matrices. These procedures are based on those presented in the Supplement to the 20th Edition of Standard Methods for the Examination of Water and Eastewater and EPA Methods 1601 and 1602. Two quantitative procedures and one qualitative, presence-absence procedures are presented. The procedures can be used, without supplementary methods, to assay small volumes of water (10 mL to 1L). For larger volumes (>100L), large-scale concentration methods such as described in Chapter 14 may be incorporated into the assay scheme. However, as some concentration procedures may result in appreciable loss or inactivation of coliphage, it is recommended that the suitability of any large volume concentration method be evaluated in measured recovery trials before implementation. Develop sensitive techniques to detect and identify emerging human waterborne pathogenic viruses and viruses on the CCL.Determine effectiveness of viral indicators to measure microbial quality in water matrices.Support activities: (a) culture and distribution of mammalian cells for Agency and scientific community research needs, (b) provide operator expertise for research requiring confocal and electron microscopy, (c) glassware cleaning, sterilization and biological waste disposal for the Cincinnati EPA facility, (d) operation of infectious pathogenic suite, (e) maintenance of walk-in constant temperature rooms and (f) provid

A numerical procedure for failure mode detection of masonry arches reinforced with fiber reinforced polymeric materials

NASA Astrophysics Data System (ADS)

Galassi, S.

2018-05-01

In this paper a mechanical model of masonry arches strengthened with fibre-reinforced composite materials and the relevant numerical procedure for the analysis are proposed. The arch is modelled by using an assemblage of rigid blocks that are connected together and, also to the supporting structures, by mortar joints. The presence of the reinforcement, usually a sheet placed at the intrados or the extrados, prevents the occurrence of cracks that could activate possible collapse mechanisms, due to tensile failure of the mortar joints. Therefore, in a reinforced arch failure generally occurs in a different way from the URM arch. The numerical procedure proposed checks, as a function of an external incremental load, the inner stress state in the arch, in the reinforcement and in the adhesive layer. In so doing, it then provides a prediction of failure modes. Results obtained from experimental tests, carried out on four in-scale models performed in a laboratory, have been compared with those provided by the numerical procedure, implemented in ArchiVAULT, a software developed by the author. In this regard, the numerical procedure is an extension of previous works. Although additional experimental investigations are necessary, these former results confirm that the proposed numerical procedure is promising.

Synthesis of Aromatic Thiolate-Protected Gold Nanomolecules by Core Conversion: The Case of Au36(SPh-tBu)24.

PubMed

Theivendran, Shevanuja; Dass, Amala

2017-08-01

Ultrasmall nanomolecules (<2 nm) such as Au 25 (SCH 2 CH 2 Ph) 18 , Au 38 (SCH 2 CH 2 Ph) 24 , and Au 144 (SCH 2 CH 2 Ph) 60 are well studied and can be prepared using established synthetic procedures. No such synthetic protocols that result in high yield products from commercially available starting materials exist for Au 36 (SPh-X) 24 . Here, we report a synthetic procedure for the large-scale synthesis of highly stable Au 36 (SPh-X) 24 with a yield of ∼42%. Au 36 (SPh-X) 24 was conveniently synthesized by using tert-butylbenzenethiol (HSPh-tBu, TBBT) as the ligand, giving a more stable product with better shelf life and higher yield than previously reported for making Au 36 (SPh) 24 from thiophenol (PhSH). The choice of thiol, solvent, and reaction conditions were modified for the optimization of the synthetic procedure. The purposes of this work are to (1) optimize the existing procedure to obtain stable product with better yield, (2) develop a scalable synthetic procedure, (3) demonstrate the superior stability of Au 36 (SPh-tBu) 24 when compared to Au 36 (SPh) 24 , and (4) demonstrate the reproducibility and robustness of the optimized synthetic procedure.

Characterization of Two Ton NaI Scintillator

NASA Astrophysics Data System (ADS)

Maier, Alleta; Coherent Collaboration

2017-09-01

The COHERENT collaboration is dedicated to measuring Coherent Elastic Neutrino-Nucleus Scattering (CE νNS), an interaction predicted by the standard model that ultimately serves as a background floor for dark matter detection. In the pursuit of observing the N2 scaling predicted, COHERENT is deploying two tons of NaI[Tl] detector to observe CE νNS recoils of sodium nuclei. Before the two tons of this NaI[Tl] scintillator are deployed, however, all crystals and PMTs must be characterized to understand the individual properties vital to precision in the measurement of CE νNS. This detector is also expected to allow COHERENT to observe charged current and CE νNS interactions with 127I. A standard operating procedure is developed to characterize each detector based on seven properties relevant to precision in the measurement of CE νNS: energy scale, energy resolution, low-energy light yield non-linearity, decay time energy dependence, position variance, time variance, and background levels. Crystals will be tested and characterized for these properties in the context of a ton-scale NaI[Tl] detector. Preliminary development of the SOP has allowed for greater understanding of optimization methods needed for characterization for the ton scale detector. TUNL, NSF, Duke University.

Comparison of methods for dealing with missing values in the EPV-R.

PubMed

Paniagua, David; Amor, Pedro J; Echeburúa, Enrique; Abad, Francisco J

2017-08-01

The development of an effective instrument to assess the risk of partner violence is a topic of great social relevance. This study evaluates the scale of “Predicción del Riesgo de Violencia Grave Contra la Pareja” –Revisada– (EPV-R - Severe Intimate Partner Violence Risk Prediction Scale-Revised), a tool developed in Spain, which is facing the problem of how to treat the high rate of missing values, as is usual in this type of scale. First, responses to the EPV-R in a sample of 1215 male abusers who were reported to the police were used to analyze the patterns of occurrence of missing values, as well as the factor structure. Second, we analyzed the performance of various imputation methods using simulated data that emulates the missing data mechanism found in the empirical database. The imputation procedure originally proposed by the authors of the scale provides acceptable results, although the application of a method based on the Item Response Theory could provide greater accuracy and offers some additional advantages. Item Response Theory appears to be a useful tool for imputing missing data in this type of questionnaire.

Dimensionality and construct validity of an instrument designed to measure the metacognitive orientation of science classroom learning environments.

PubMed

Thomas, Gregory P

2004-01-01

The purpose of this study was to establish the factorial construct validity and dimensionality of the Metacognitive Orientation Learning Environment Scale-Science (MOLES-S) which was designed to measure the metacognitive orientation of science classroom learning environments. The metacognitive orientation of a science classroom learning environment is the extent to which psychosocial conditions that are known to enhance students' metacognition are evident within that classroom. The development of items comprising this scale was based on a theoretical understanding of metacognition, learning environments and the development of previous learning environments instruments. Four possible hypothesized structure models, each consistent with the literature, were reviewed and their merits were compared on the basis of empirical data drawn from two populations of 1026 and 1223 Hong Kong secondary school students using confirmatory factor analysis procedures. The scale was calibrated using the Rasch rating scale model using data from the 1223 student sample. The results suggest that there is strong evidence to support the factorial construct validity of the MOLES-S but that, on the basis of the Rasch analysis, there are still suggestions for further refinement and improvement of the MOLES-S.

Limitations of subjective cognitive load measures in simulation-based procedural training.

PubMed

Naismith, Laura M; Cheung, Jeffrey J H; Ringsted, Charlotte; Cavalcanti, Rodrigo B

2015-08-01

The effective implementation of cognitive load theory (CLT) to optimise the instructional design of simulation-based training requires sensitive and reliable measures of cognitive load. This mixed-methods study assessed relationships between commonly used measures of total cognitive load and the extent to which these measures reflected participants' experiences of cognitive load in simulation-based procedural skills training. Two groups of medical residents (n = 38) completed three questionnaires after participating in simulation-based procedural skills training sessions: the Paas Cognitive Load Scale; the NASA Task Load Index (TLX), and a cognitive load component (CLC) questionnaire we developed to assess total cognitive load as the sum of intrinsic load (how complex the task is), extraneous load (how the task is presented) and germane load (how the learner processes the task for learning). We calculated Pearson's correlation coefficients to assess agreement among these instruments. Group interviews explored residents' perceptions about how the simulation sessions contributed to their total cognitive load. Interviews were audio-recorded, transcribed and subjected to qualitative content analysis. Total cognitive load scores differed significantly according to the instrument used to assess them. In particular, there was poor agreement between the Paas Scale and the TLX. Quantitative and qualitative findings supported intrinsic cognitive load as synonymous with mental effort (Paas Scale), mental demand (TLX) and task difficulty and complexity (CLC questionnaire). Additional qualitative themes relating to extraneous and germane cognitive loads were not reflected in any of the questionnaires. The Paas Scale, TLX and CLC questionnaire appear to be interchangeable as measures of intrinsic cognitive load, but not of total cognitive load. A more complete understanding of the sources of extraneous and germane cognitive loads in simulation-based training contexts is necessary to determine how best to measure and assess their effects on learning and performance outcomes. © 2015 John Wiley & Sons Ltd.

Long-term variations of fluxes of solar protons and helium isotopes

NASA Astrophysics Data System (ADS)

Anufriev, G. S.

2012-11-01

The fluxes of hydrogen and helium isotopes in the solar wind are reconstructed over a long time scale since the present time up to 600 million years back. Abundances of helium isotopes, obtained in the helium isotopic analysis made for 8 lunar soil samples, were used as initial data in the reconstruction procedure. Samples were taken off from various levels of the 1.6-m core of lunar soil delivered by the automatic Luna-24 station in 1976. The data on modern hydrogen and helium fluxes were used as well. The developed reconstruction procedure allowed one to select various solar wind components in a "gross" composition. Proton flux variations over the interval of 600 million years do not exceed a value of 40 %. Helium flux variations reach a value of 1.5-2 relative to the average value. Most likely, this circumstance is caused by considerable variations of a number of coronal mass ejections ( CME) enriched by helium. The arguments in favor of solar activity polycyclicity on a long time scale are discussed.

Design of a general methodology for the evaluation and categorization of an environmental program with special reference to Costa Rica

DOE Office of Scientific and Technical Information (OSTI.GOV)

Castillo, H.

1982-01-01

The Government of Costa Rica has stated the need for a formal procedure for the evaluation and categorization of an environmental program. Methodological studies were prepared as the basis for the development of the general methodology by which each government or institution can adapt and implement the procedure. The methodology was established by using different techniques according to their contribution to the evaluation process, such as: Systemic Approach, Delphi, and Saaty Methods. The methodology consists of two main parts: 1) evaluation of the environmental aspects by using different techniques; 2) categorization of the environmental aspects by applying the methodology tomore » the Costa Rican Environmental affairs using questionnaire answers supplied by experts both inside and outside of the country. The second part of the research includes Appendixes in which is presented general information concerning institutions related to environmental affairs; description of the methods used; results of the current status evaluation and its scale; the final scale of categorization; and the questionnaires and a list of experts. The methodology developed in this research will have a beneficial impact on environmental concerns in Costa Rica. As a result of this research, a Commission Office of Environmental Affairs, providing links between consumers, engineers, scientists, and the Government, is recommended. Also there is significant potential use of this methodology in developed countries for a better balancing of the budgets of major research programs such as cancer, heart, and other research areas.« less

Estimating Anesthesia Time Using the Medicare Claim: A Validation Study

PubMed Central

Silber, Jeffrey H.; Rosenbaum, Paul R.; Even-Shoshan, Orit; Mi, Lanyu; Kyle, Fabienne; Teng, Yun; Bratzler, Dale W.; Fleisher, Lee A.

2012-01-01

Introduction Procedure length is a fundamental variable associated with quality of care, though seldom studied on a large scale. We sought to estimate procedure length through information obtained in the anesthesia claim submitted to Medicare to validate this method for future studies. Methods The Obesity and Surgical Outcomes Study enlisted 47 hospitals located across New York, Texas and Illinois to study patients undergoing hip, knee, colon and thoracotomy procedures. 15,914 charts were abstracted to determine body mass index and initial patient physiology. Included in this abstraction were induction, cut, close and recovery room times. This chart information was merged to Medicare claims which included anesthesia Part B billing information. Correlations between chart times and claim times were analyzed, models developed, and median absolute differences in minutes calculated. Results Of the 15,914 eligible patients, there were 14,369 where both chart and claim times were available for analysis. In these 14,369, the Spearman correlation between chart and claim time was 0.94 (95% CI 0.94, 0.95) and the median absolute difference between chart and claim time was only 5 minutes (95% CI: 5.0, 5.5). The anesthesia claim can also be used to estimate surgical procedure length, with only a modest increase in error. Conclusion The anesthesia bill found in Medicare claims provides an excellent source of information for studying operative time on a vast scale throughout the United States. However, errors in both chart abstraction and anesthesia claims can occur. Care must be taken in the handling of outliers in this data. PMID:21720242

Integral-geometry characterization of photobiomodulation effects on retinal vessel morphology

PubMed Central

Barbosa, Marconi; Natoli, Riccardo; Valter, Kriztina; Provis, Jan; Maddess, Ted

2014-01-01

The morphological characterization of quasi-planar structures represented by gray-scale images is challenging when object identification is sub-optimal due to registration artifacts. We propose two alternative procedures that enhances object identification in the integral-geometry morphological image analysis (MIA) framework. The first variant streamlines the framework by introducing an active contours segmentation process whose time step is recycled as a multi-scale parameter. In the second variant, we used the refined object identification produced in the first variant to perform the standard MIA with exact dilation radius as multi-scale parameter. Using this enhanced MIA we quantify the extent of vaso-obliteration in oxygen-induced retinopathic vascular growth, the preventative effect (by photobiomodulation) of exposure during tissue development to near-infrared light (NIR, 670 nm), and the lack of adverse effects due to exposure to NIR light. PMID:25071966

Social-Emotional Learning Competency (SELC) Scale: Development of an Instrument to Measure School Counselors' Perceptions of Implementation, Impact, Involvement, and Importance of School-Wide Social & Emotional Learning Practices

ERIC Educational Resources Information Center

Bikowsky, Bella A.

2013-01-01

Concerns have arisen in the field of education regarding the social-emotional needs of students accompanied by an outcry for more effective discipline procedures in an effort to support not only the academic learning but also the social and emotional learning (SEL) of students. Initially, this study intended to examine the psychometric properties…

Can microbes economically remove sulfur

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fox, J.L.

Researchers have reported that refiners who now rely on costly physic-chemical procedures to desulfurize petroleum will soon have an alternative microbial-enzyme-based approach to this process. This new approach is still under development and considerable number chemical engineering problems need to be solved before this process is ready for large-scale use. This paper reviews the several research projects dedicated solving the problems that keep a biotechnology-based alternative from competing with chemical desulfurization.

The development of pyro shock test requirements for Viking Lander Capsule components

NASA Technical Reports Server (NTRS)

Barrett, S.

1975-01-01

The procedure used to derive component-level pyro shock specifications for the Viking Lander Capsule (VLC) is described. Effects of shock path distance and mechanical joints between the device and the point at which the environment is to be estimated are accounted for in the method. The validity of the prediction technique was verified by a series of shock tests on a full-scale structural model of the lander body.

Copper catalyzed oxidative coupling reactions for trifluoromethylselenolations--synthesis of R-SeCF3 compounds using air stable tetramethylammonium trifluoromethylselenate.

PubMed

Lefebvre, Quentin; Pluta, Roman; Rueping, Magnus

2015-03-14

The aerobic, room-temperature coupling of tetramethylammonium trifluoromethylselenate with readily available boronic acids, boronic esters, and terminal alkynes has been developed. The method permits direct access to valuable trifluoromethylselenoarenes and alkynes under mild conditions. A convenient one-pot reaction, a scale up procedure as well as an extension to perfluoroalkylselenates are also presented to further demonstrate the synthetic utility of this reaction.

Box-Counting Dimension Revisited: Presenting an Efficient Method of Minimizing Quantization Error and an Assessment of the Self-Similarity of Structural Root Systems

PubMed Central

Bouda, Martin; Caplan, Joshua S.; Saiers, James E.

2016-01-01

Fractal dimension (FD), estimated by box-counting, is a metric used to characterize plant anatomical complexity or space-filling characteristic for a variety of purposes. The vast majority of published studies fail to evaluate the assumption of statistical self-similarity, which underpins the validity of the procedure. The box-counting procedure is also subject to error arising from arbitrary grid placement, known as quantization error (QE), which is strictly positive and varies as a function of scale, making it problematic for the procedure's slope estimation step. Previous studies either ignore QE or employ inefficient brute-force grid translations to reduce it. The goals of this study were to characterize the effect of QE due to translation and rotation on FD estimates, to provide an efficient method of reducing QE, and to evaluate the assumption of statistical self-similarity of coarse root datasets typical of those used in recent trait studies. Coarse root systems of 36 shrubs were digitized in 3D and subjected to box-counts. A pattern search algorithm was used to minimize QE by optimizing grid placement and its efficiency was compared to the brute force method. The degree of statistical self-similarity was evaluated using linear regression residuals and local slope estimates. QE, due to both grid position and orientation, was a significant source of error in FD estimates, but pattern search provided an efficient means of minimizing it. Pattern search had higher initial computational cost but converged on lower error values more efficiently than the commonly employed brute force method. Our representations of coarse root system digitizations did not exhibit details over a sufficient range of scales to be considered statistically self-similar and informatively approximated as fractals, suggesting a lack of sufficient ramification of the coarse root systems for reiteration to be thought of as a dominant force in their development. FD estimates did not characterize the scaling of our digitizations well: the scaling exponent was a function of scale. Our findings serve as a caution against applying FD under the assumption of statistical self-similarity without rigorously evaluating it first. PMID:26925073

Objective assessment of induced acute pain in neonatology with the Newborn Infant Parasympathetic Evaluation index.

PubMed

Cremillieux, C; Makhlouf, A; Pichot, V; Trombert, B; Patural, H

2018-07-01

Objective tools are needed to improve pain assessment in newborns. The aim of this study was to assess the correlation between the Newborn Infant Parasympathetic Evaluation (NIPE) index and two pain scales during a painful procedure in premature infants. Each baby born at least at 26 weeks of gestational age (GA) undergoing a planned painful procedure in the Neonatal Intensive Care Unit (NICU) was eligible. NIPE index, heart rate variability (HRV) indices and Neonatal Acute Pain scale (DAN) were recorded across three periods: the first at rest 5 min before the painful procedure (T1), the second during it (T2) and the third 3 min after the end of it (T3). The Premature Infant Pain Profile-Revised (PIPP-R) pain scale was recorded at T2. Sixty-four recordings were performed in 29 preterm infants (mean GA = 29.9 ± 4.2 weeks). Twenty-eight tachograms were coupled to NIPE for analysis. We did not find a correlation between the NIPE index and DAN and PIPP-R at the pain time T2. Between T1 and T2, heart rate was higher (159 ± 16 vs. 169 ± 12, p < 0.001). Considering the linear HRV indices, we did not observe a modification in parasympathetic or sympathetic activity, while for the nonlinear HRV indices (H exponent, Approximate and conditional Entropy), a significant change towards a loss of physiological chaotic cardiac behaviour was detected. The NIPE index seems to be not reliable to assess acute pain in the preterm infant, but other HRV indices could be explored as additional tools next to pain scales in NICUs. The NIPE monitor was developed for objective pain assessment in neonates based on HFnu variations, but it does not seem reliable enough for assessing acute pain in real time in preterm neonates. Pain assessment in preterm babies still relies on pain scales. © 2018 European Pain Federation - EFIC®.

Development of a tool to measure person-centered maternity care in developing settings: validation in a rural and urban Kenyan population.

PubMed

Afulani, Patience A; Diamond-Smith, Nadia; Golub, Ginger; Sudhinaraset, May

2017-09-22

Person-centered reproductive health care is recognized as critical to improving reproductive health outcomes. Yet, little research exists on how to operationalize it. We extend the literature in this area by developing and validating a tool to measure person-centered maternity care. We describe the process of developing the tool and present the results of psychometric analyses to assess its validity and reliability in a rural and urban setting in Kenya. We followed standard procedures for scale development. First, we reviewed the literature to define our construct and identify domains, and developed items to measure each domain. Next, we conducted expert reviews to assess content validity; and cognitive interviews with potential respondents to assess clarity, appropriateness, and relevance of the questions. The questions were then refined and administered in surveys; and survey results used to assess construct and criterion validity and reliability. The exploratory factor analysis yielded one dominant factor in both the rural and urban settings. Three factors with eigenvalues greater than one were identified for the rural sample and four factors identified for the urban sample. Thirty of the 38 items administered in the survey were retained based on the factors loadings and correlation between the items. Twenty-five items load very well onto a single factor in both the rural and urban sample, with five items loading well in either the rural or urban sample, but not in both samples. These 30 items also load on three sub-scales that we created to measure dignified and respectful care, communication and autonomy, and supportive care. The Chronbach alpha for the main scale is greater than 0.8 in both samples, and that for the sub-scales are between 0.6 and 0.8. The main scale and sub-scales are correlated with global measures of satisfaction with maternity services, suggesting criterion validity. We present a 30-item scale with three sub-scales to measure person-centered maternity care. This scale has high validity and reliability in a rural and urban setting in Kenya. Validation in additional settings is however needed. This scale will facilitate measurement to improve person-centered maternity care, and subsequently improve reproductive outcomes.

Self-stigma among concealable minorities in Hong Kong: conceptualization and unified measurement.

PubMed

Mak, Winnie W S; Cheung, Rebecca Y M

2010-04-01

Self-stigma refers to the internalized stigma that individuals may have toward themselves as a result of their minority status. Not only can self-stigma dampen the mental health of individuals, it can deter them from seeking professional help lest disclosing their minority status lead to being shunned by service providers. No unified instrument has been developed to measure consistently self-stigma that could be applied to different concealable minority groups. The present study presented findings based on 4 studies on the development and validation of the Self-Stigma Scale, conducted in Hong Kong with community samples of mental health consumers, recent immigrants from Mainland China, and sexual minorities. Upon a series of validation procedures, a 9-item Self-Stigma Scale-Short Form was developed. Initial support on its reliability and construct validity (convergent and criterion validities) were found among 3 stigmatized groups. Utility of this unified measure was to establish an empirical basis upon which self-stigma of different concealable minority groups could be assessed under the same dimensions. Health-care professionals could make use of this short scale to assess potential self-stigmatization among concealable minorities, which may hamper their treatment process as well as their overall well-being.

QUEST+: A general multidimensional Bayesian adaptive psychometric method.

PubMed

Watson, Andrew B

2017-03-01

QUEST+ is a Bayesian adaptive psychometric testing method that allows an arbitrary number of stimulus dimensions, psychometric function parameters, and trial outcomes. It is a generalization and extension of the original QUEST procedure and incorporates many subsequent developments in the area of parametric adaptive testing. With a single procedure, it is possible to implement a wide variety of experimental designs, including conventional threshold measurement; measurement of psychometric function parameters, such as slope and lapse; estimation of the contrast sensitivity function; measurement of increment threshold functions; measurement of noise-masking functions; Thurstone scale estimation using pair comparisons; and categorical ratings on linear and circular stimulus dimensions. QUEST+ provides a general method to accelerate data collection in many areas of cognitive and perceptual science.

Strategy, structure, and patient quality outcomes in ambulatory surgery centers (1997-2004).

PubMed

Chukmaitov, Askar; Devers, Kelly J; Harless, David W; Menachemi, Nir; Brooks, Robert G

2011-04-01

The purpose of this study was to examine potential associations among ambulatory surgery centers' (ASCs) organizational strategy, structure, and quality performance. The authors obtained several large-scale, all-payer claims data sets for the 1997 to 2004 period. The authors operationalized quality performance as unplanned hospitalizations at 30 days after outpatient arthroscopy and colonoscopy procedures. The authors draw on related organizational theory, behavior, and health services research literatures to develop their conceptual framework and hypotheses and fitted fixed and random effects Poisson regression models with the count of unplanned hospitalizations. Consistent with the key hypotheses formulated, the findings suggest that higher levels of specialization and the volume of procedures may be associated with a decrease in unplanned hospitalizations at ASCs.

High-dimensional entanglement certification

PubMed Central

Huang, Zixin; Maccone, Lorenzo; Karim, Akib; Macchiavello, Chiara; Chapman, Robert J.; Peruzzo, Alberto

2016-01-01

Quantum entanglement is the ability of joint quantum systems to possess global properties (correlation among systems) even when subsystems have no definite individual property. Whilst the 2-dimensional (qubit) case is well-understood, currently, tools to characterise entanglement in high dimensions are limited. We experimentally demonstrate a new procedure for entanglement certification that is suitable for large systems, based entirely on information-theoretics. It scales more efficiently than Bell’s inequality and entanglement witness. The method we developed works for arbitrarily large system dimension d and employs only two local measurements of complementary properties. This procedure can also certify whether the system is maximally entangled. We illustrate the protocol for families of bipartite states of qudits with dimension up to 32 composed of polarisation-entangled photon pairs. PMID:27311935

Composite Structures and Materials Research at NASA Langley Research Center

NASA Technical Reports Server (NTRS)

Starnes, James H., Jr.; Dexter, H. Benson; Johnston, Norman J.; Ambur, Damodar R.; Cano, roberto J.

2003-01-01

A summary of recent composite structures and materials research at NASA Langley Research Center is presented. Fabrication research to develop low-cost automated robotic fabrication procedures for thermosetting and thermoplastic composite materials, and low-cost liquid molding processes for preformed textile materials is described. Robotic fabrication procedures discussed include ply-by-ply, cure-on-the-fly heated placement head and out-of-autoclave electron-beam cure methods for tow and tape thermosetting and thermoplastic materials. Liquid molding fabrication processes described include Resin Film Infusion (RFI), Resin Transfer Molding (RTM) and Vacuum-Assisted Resin Transfer Molding (VARTM). Results for a full-scale composite wing box are summarized to identify the performance of materials and structures fabricated with these low-cost fabrication methods.

Tetrahedron Formation Control

NASA Technical Reports Server (NTRS)

Petruzzo, Charles; Guzman, Jose

2004-01-01

This paper considers the preliminary development of a general optimization procedure for tetrahedron formation control. The maneuvers are assumed to be impulsive and a multi-stage optimization method is employed. The stages include (1) targeting to a fixed tetrahedron location and orientation, and (2) rotating and translating the tetrahedron. The number of impulsive maneuvers can also be varied. As the impulse locations and times change, new arcs are computed using a differential corrections scheme that varies the impulse magnitudes and directions. The result is a continuous trajectory with velocity discontinuities. The velocity discontinuities are then used to formulate the cost function. Direct optimization techniques are employed. The procedure is applied to the NASA Goddard Magnetospheric Multi-Scale (MMS) mission to compute preliminary formation control fuel requirements.

Composite Structures and Materials Research at NASA Langley Research Center

NASA Technical Reports Server (NTRS)

Starnes, James H., Jr.; Dexter, H. Benson; Johnston, Norman J.; Ambur, Damodar R.; Cano, Roberto J.

2001-01-01

A summary of recent composite structures and materials research at NASA Langley Research Center is presented. Fabrication research to develop low-cost automated robotic fabrication procedures for thermosetting and thermoplastic composite materials, and low-cost liquid molding processes for preformed textile materials is described. Robotic fabrication procedures discussed include ply-by-ply, cure-on-the-fly heated placement head and out-of-autoclave electron-beam cure methods for tow and tape thermosetting and thermoplastic materials. Liquid molding fabrication processes described include Resin Film Infusion (RFI) Resin Transfer Molding (RTM) and Vacuum-Assisted Resin Transfer Molding (VARTM). Results for a full-scale composite wing box are summarized to identify the performance of materials and structures fabricated with these low-cost fabrication methods.

High-dimensional entanglement certification

NASA Astrophysics Data System (ADS)

Huang, Zixin; Maccone, Lorenzo; Karim, Akib; Macchiavello, Chiara; Chapman, Robert J.; Peruzzo, Alberto

2016-06-01

Quantum entanglement is the ability of joint quantum systems to possess global properties (correlation among systems) even when subsystems have no definite individual property. Whilst the 2-dimensional (qubit) case is well-understood, currently, tools to characterise entanglement in high dimensions are limited. We experimentally demonstrate a new procedure for entanglement certification that is suitable for large systems, based entirely on information-theoretics. It scales more efficiently than Bell’s inequality and entanglement witness. The method we developed works for arbitrarily large system dimension d and employs only two local measurements of complementary properties. This procedure can also certify whether the system is maximally entangled. We illustrate the protocol for families of bipartite states of qudits with dimension up to 32 composed of polarisation-entangled photon pairs.

An Engineering Solution for Solving Mesh Size Effects in the Simulation of Delamination with Cohesive Zone Models

NASA Technical Reports Server (NTRS)

Turon, A.; Davila, C. G.; Camanho, P. P.; Costa, J.

2007-01-01

This paper presents a methodology to determine the parameters to be used in the constitutive equations of Cohesive Zone Models employed in the simulation of delamination in composite materials by means of decohesion finite elements. A closed-form expression is developed to define the stiffness of the cohesive layer. A novel procedure that allows the use of coarser meshes of decohesion elements in large-scale computations is also proposed. The procedure ensures that the energy dissipated by the fracture process is computed correctly. It is shown that coarse-meshed models defined using the approach proposed here yield the same results as the models with finer meshes normally used for the simulation of fracture processes.

The visual analogue thermometer and the graphic numeric rating scale: a comparison of self-report instruments for pain measurement in adults with burns.

PubMed

de Jong, A E E; Bremer, M; Hofland, H W C; Schuurmans, M J; Middelkoop, E; van Loey, N E E

2015-03-01

To evaluate the adequacy of pain management in burn care, pain measurement is essential. The visual analogue thermometer (VAT) and graphic numeric rating scale (GNRS) are frequently used self-report instruments for burn pain. To legitimise their interchangeable use in research and practice, we aimed to compare self-reports obtained by the VAT and GNRS, the ability of the scales to differentiate background from procedural pain, and to compare potential cutpoints. Adults with acute burns (N=319) participated in the study (67% male, mean age 40.3 years (SD 16), mean TBSA 9.9% (SD 10.4). Correlation coefficients between VAT and GNRS were 0.64 and 0.55 for, respectively, morning and afternoon background pain and 0.51 for procedural pain (p<0.01). VAT scores were lower than GNRS scores for all pain types (p<0.01). Both scales could differentiate background from procedural pain: procedural pain was higher (p<0.01). The standardized response mean was moderate (0.518 for VAT and 0.571 for GNRS). Self-reported thresholds for 'unacceptable pain' by GNRS were higher than by VAT (p<0.001). ROC analyses showed that the highest sensitivity was reached for pain score 2 for both scales. The results suggest that the instruments cannot be used interchangeably without taking their differences into account. Copyright © 2014 Elsevier Ltd and ISBI. All rights reserved.

A rapid and simple procedure to detect the presence of MVM in conditioned cell fluids or culture media.

PubMed

Chang, A; Havas, S; Borellini, F; Ostrove, J M; Bird, R E

1997-12-01

During the manufacture of biopharmaceuticals, numerous adventitious agents have been detected in Master Cell Banks, end-of-production cells as well as bulk harvest fluid. Recently, a number of large-scale production bioreactors have become infected with Minute Virus of Mice (MVM) during cGMP (current good manufacturing practices) operations, and this has resulted in both the loss of product and the need for major cleaning validation procedures to be put in place. We have developed a simple DNA extraction/PCR assay to detect the presence of MVM in cell culture supernatant (conditioned cell fluids). This highly specific assay can detect 10 or fewer genome equivalents (copies) of MVM following PCR and gel electrophoresis visualization. For routine high-throughput detection, 300-100 copies could be consistently detected. The extraction procedure was shown to reliably detect MVM at a concentration of 1 TCID50/ml. The combination of the extraction/PCR procedure establishes a powerful, sensitive, specific assay that can detect the presence of MVM sequences with a 1-day turnaround time.

Correlation of ground tests and analyses of a dynamically scaled Space Station model configuration

NASA Technical Reports Server (NTRS)

Javeed, Mehzad; Edighoffer, Harold H.; Mcgowan, Paul E.

1993-01-01

Verification of analytical models through correlation with ground test results of a complex space truss structure is demonstrated. A multi-component, dynamically scaled space station model configuration is the focus structure for this work. Previously established test/analysis correlation procedures are used to develop improved component analytical models. Integrated system analytical models, consisting of updated component analytical models, are compared with modal test results to establish the accuracy of system-level dynamic predictions. Design sensitivity model updating methods are shown to be effective for providing improved component analytical models. Also, the effects of component model accuracy and interface modeling fidelity on the accuracy of integrated model predictions is examined.

Development and application of operational techniques for the inventory and monitoring of resources and uses for the Texas coastal zone. [Galvaston Bay and San Antonio test sites

NASA Technical Reports Server (NTRS)

Jones, R. (Principal Investigator); Harwood, P.; Finley, R.; Clements, G.; Lodwick, L.; Mcculloch, S.; Marphy, D.

1976-01-01

The author has identified the following significant results. The most significant ADP result was the modification of the DAM package to produce classified printouts, scaled and registered to U.S.G.S., 71/2 minute topographic maps from LARSYS-type classification files. With this modification, all the powerful scaling and registration capabilities of DAM become available for multiclass classification files. The most significant results with respect to image interpretation were the application of mapping techniques to a new, more complex area, and the refinement of an image interpretation procedure which should yield the best results.

Acoustic Measurements for Small Solid Rocket Motors

NASA Technical Reports Server (NTRS)

Vargas, Magda B.; Kenny, R. Jeremy

2010-01-01

Models have been developed to predict large solid rocket motor acoustic loads based on the scaling of small solid rocket motors. MSFC has measured several small solid rocket motors in horizontal and launch configurations to anchor these models. Solid Rocket Test Motor (SRTM) has ballistics similar to the Reusable Solid Rocket Motor (RSRM) therefore a good choice for acoustic scaling. Acoustic measurements were collected during the test firing of the Insulation Configuration Extended Length (ICXL) 7,6, and 8 (in firing order) in order to compare to RSRM horizontal firing data. The scope of this presentation includes: Acoustic test procedures and instrumentation implemented during the three SRTM firings and Data analysis method and general trends observed in the data.

Arthroscopic Surgical Procedures Versus Sham Surgery for Patients With Femoroacetabular Impingement and/or Labral Tears: Study Protocol for a Randomized Controlled Trial (HIPARTI) and a Prospective Cohort Study (HARP).

PubMed

Risberg, May Arna; Ageberg, Eva; Nilstad, Agnethe; Lund, Bent; Nordsletten, Lars; Løken, Sverre; Ludvigsen, Tom; Kierkegaard, Signe; Carsen, Sasha; Kostogiannis, Ioannis; Crossley, Kay M; Glyn-Jones, Sion; Kemp, Joanne L

2018-04-01

Study Design Study protocol for a randomized controlled trial and a prospective cohort. Background The number of arthroscopic surgical procedures for patients with femoroacetabular impingement syndrome (FAIS) has significantly increased worldwide, but high-quality evidence of the effect of such interventions is lacking. Objectives The primary objective will be to determine the efficacy of hip arthroscopic procedures compared to sham surgery on patient-reported outcomes for patients with FAIS (HIP ARThroscopy International [HIPARTI] Study). The secondary objective will be to evaluate prognostic factors for long-term outcome after arthroscopic surgical interventions in patients with FAIS (Hip ARthroscopy Prospective [HARP] Study). Methods The HIPARTI Study will include 140 patients and the HARP Study will include 100 patients. The international Hip Outcome Tool-33 will be the primary outcome measure at 1 year. Secondary outcome measures will be the Hip disability and Osteoarthritis Outcome Score, Arthritis Self-Efficacy Scale, fear of movement (Tampa Scale of Kinesiophobia), Patient-Specific Functional Scale, global rating of change score, and expectations. Other outcomes will include active hip range of motion, hip muscle strength tests, functional performance tests, as well as radiological assessments using radiographs and magnetic resonance imaging. Conclusion To determine the true effect of surgery, beyond that of placebo, double-blinded placebo-controlled trials including sham surgery are needed. The HIPARTI Study will direct future evidence-based treatment of FAIS. Predictors for long-term development and progression of degenerative changes in the hip are also needed for this young patient group with FAIS; hence, responders and nonresponders to treatment could be determined. J Orthop Sports Phys Ther 2018;48(4):325-335. doi:10.2519/jospt.2018.7931.

A procedure for scaling sensory attributes based on multidimensional measurements: application to sensory sharpness of kitchen knives

NASA Astrophysics Data System (ADS)

Takatsuji, Toshiyuki; Tanaka, Ken-ichi

1996-06-01

A procedure is derived by which sensory attributes can be scaled as a function of various physical and/or chemical properties of the object to be tested. This procedure consists of four successive steps: (i) design and experiment, (ii) fabrication of specimens according to the design parameters, (iii) assessment of a sensory attribute using sensory evaluation and (iv) derivation of the relationship between the parameters and the sensory attribute. In these steps an experimental design using orthogonal arrays, analysis of variance and regression analyses are used strategically. When a specimen with the design parameters cannot be physically fabricated, an alternative specimen having parameters closest to the design is selected from a group of specimens which can be physically made. The influence of the deviation of actual parameters from the desired ones is also discussed. A method of confirming the validity of the regression equation is also investigated. The procedure is applied to scale the sensory sharpness of kitchen knives as a function of the edge angle and the roughness of the cutting edge.

Large eddy simulation of a boundary layer with concave streamwise curvature

NASA Technical Reports Server (NTRS)

Lund, Thomas S.

1993-01-01

One of the most exciting recent developments in the field of large eddy simulation (LES) is the dynamic subgrid-scale model. The dynamic model concept is a general procedure for evaluating model constants by sampling a band of the smallest scales actually resolved in the simulation. To date, the procedure has been used primarily in conjunction with the Smagorinsky model. The dynamic procedure has the advantage that the value of the model constant need not be specified a priori, but rather is calculated as a function of space and time as the simulation progresses. This feature makes the dynamic model especially attractive for flows in complex geometries where it is difficult or impossible to calibrate model constants. The dynamic model was highly successful in benchmark tests involving homogeneous and channel flows. Having demonstrated the potential of the dynamic model in these simple flows, the overall direction of the LES effort at CTR shifted toward an evaluation of the model in more complex situations. The current test cases are basic engineering-type flows for which Reynolds averaged approaches were unable to model the turbulence to within engineering accuracy. Flows currently under investigation include a backward-facing step, wake behind a circular cylinder, airfoil at high angles of attack, separated flow in a diffuser, and boundary layer over a concave surface. Preliminary results from the backward-facing step and cylinder wake simulations are encouraging. Progress on the LES of a boundary layer on a concave surface is discussed. Although the geometry of a concave wall is not very complex, the boundary layer that develops on its surface is difficult to model due to the presence of streamwise Taylor-Gortler vortices. These vortices arise as a result of a centrifugal instability associated with the convex curvature.

Acute inhalative exposure assessment: derivation of guideline levels with special regard to sensitive subpopulations and time scaling.

PubMed

Mielke, Hans; Gundert, Anna; Abraham, Klaus; Gundert-Remy, Ursula

2005-10-30

Risk assessment for acute airborne exposure to volatile organic compounds (VOCs), including exposure to chemical warfare agents, requires consideration of local and systemic effects at high concentrations. The operating procedure developed by the US Acute Exposure Guideline Level (AEGL) committee has gained special attention, in part because of the international collaboration in the project. The procedure defines three levels (AEGL-1: discomfort; AEGL-2: irreversible or other serious, long-lasting adverse effects; AEGL-3: life-threatening effects or death) for different exposure times (10 and 30 min, and 1, 4 and 8 h). In this article, the methodology for deriving AEGL values is reported. Extending the areas covered by the existing AEGL methodology, sensitive subpopulations are dealt with in more detail. Sensitive persons are expected to suffer from stronger effects when exposed to a given external concentration. Using a kinetic model with the sample substance dichloromethane (DCM), the higher internal exposure of children is quantified and compared to a healthy, young adult. The difference is shown to depend on age, on dose, and on duration of exposure. Furthermore, several ways are presented to derive AEGL values for exposure times which differ from the exposure duration in animal studies ('time scaling'). In comparison to the conventional procedure, the alternative approaches are based on mechanistic models of the toxicodynamic effect. Use of these models results in AEGL values which are biologically justified.

Optimization of Large-Scale Daily Hydrothermal System Operations With Multiple Objectives

NASA Astrophysics Data System (ADS)

Wang, Jian; Cheng, Chuntian; Shen, Jianjian; Cao, Rui; Yeh, William W.-G.

2018-04-01

This paper proposes a practical procedure for optimizing the daily operation of a large-scale hydrothermal system. The overall procedure optimizes a monthly model over a period of 1 year and a daily model over a period of up to 1 month. The outputs from the monthly model are used as inputs and boundary conditions for the daily model. The models iterate and update when new information becomes available. The monthly hydrothermal model uses nonlinear programing (NLP) to minimize fuel costs, while maximizing hydropower production. The daily model consists of a hydro model, a thermal model, and a combined hydrothermal model. The hydro model and thermal model generate the initial feasible solutions for the hydrothermal model. The two competing objectives considered in the daily hydrothermal model are minimizing fuel costs and minimizing thermal emissions. We use the constraint method to develop the trade-off curve (Pareto front) between these two objectives. We apply the proposed methodology on the Yunnan hydrothermal system in China. The system consists of 163 individual hydropower plants with an installed capacity of 48,477 MW and 11 individual thermal plants with an installed capacity of 12,400 MW. We use historical operational records to verify the correctness of the model and to test the robustness of the methodology. The results demonstrate the practicability and validity of the proposed procedure.

Development of a parallel FE simulator for modeling the whole trans-scale failure process of rock from meso- to engineering-scale

NASA Astrophysics Data System (ADS)

Li, Gen; Tang, Chun-An; Liang, Zheng-Zhao

2017-01-01

Multi-scale high-resolution modeling of rock failure process is a powerful means in modern rock mechanics studies to reveal the complex failure mechanism and to evaluate engineering risks. However, multi-scale continuous modeling of rock, from deformation, damage to failure, has raised high requirements on the design, implementation scheme and computation capacity of the numerical software system. This study is aimed at developing the parallel finite element procedure, a parallel rock failure process analysis (RFPA) simulator that is capable of modeling the whole trans-scale failure process of rock. Based on the statistical meso-damage mechanical method, the RFPA simulator is able to construct heterogeneous rock models with multiple mechanical properties, deal with and represent the trans-scale propagation of cracks, in which the stress and strain fields are solved for the damage evolution analysis of representative volume element by the parallel finite element method (FEM) solver. This paper describes the theoretical basis of the approach and provides the details of the parallel implementation on a Windows - Linux interactive platform. A numerical model is built to test the parallel performance of FEM solver. Numerical simulations are then carried out on a laboratory-scale uniaxial compression test, and field-scale net fracture spacing and engineering-scale rock slope examples, respectively. The simulation results indicate that relatively high speedup and computation efficiency can be achieved by the parallel FEM solver with a reasonable boot process. In laboratory-scale simulation, the well-known physical phenomena, such as the macroscopic fracture pattern and stress-strain responses, can be reproduced. In field-scale simulation, the formation process of net fracture spacing from initiation, propagation to saturation can be revealed completely. In engineering-scale simulation, the whole progressive failure process of the rock slope can be well modeled. It is shown that the parallel FE simulator developed in this study is an efficient tool for modeling the whole trans-scale failure process of rock from meso- to engineering-scale.

Communication Network Analysis Methods.

ERIC Educational Resources Information Center

Farace, Richard V.; Mabee, Timothy

This paper reviews a variety of analytic procedures that can be applied to network data, discussing the assumptions and usefulness of each procedure when applied to the complexity of human communication. Special attention is paid to the network properties measured or implied by each procedure. Factor analysis and multidimensional scaling are among…

Development and Validation of a Risk Scale for Emergence Agitation After General Anesthesia in Children: A Prospective Observational Study.

PubMed

Hino, Maai; Mihara, Takahiro; Miyazaki, Saeko; Hijikata, Toshiyuki; Miwa, Takaaki; Goto, Takahisa; Ka, Koui

2017-08-01

Emergence agitation (EA) is a common complication in children after general anesthesia. The goal of this 2-phase study was (1) to develop a predictive model (EA risk scale) for the incidence of EA in children receiving sevoflurane anesthesia by performing a retrospective analysis of data from our previous study (phase 1) and (2) to determine the validity of the EA risk scale in a prospective observational cohort study (phase 2). Using data collected from 120 patients in our previous study, logistic regression analysis was used to predict the incidence of EA in phase 1. The optimal combination of the predictors was determined by a stepwise selection procedure using Akaike information criterion. The β-coefficient for the selected predictors was calculated, and scores for predictors determined. The predictive ability of the EA risk scale was assessed by a receiver operating characteristic (ROC) curve, and the area under the ROC curve (c-index) was calculated with a 95% confidence interval (CI). In phase 2, the validity of the EA risk scale was confirmed using another data set of 100 patients (who underwent minor surgery under general anesthesia). The ROC curve, the c-index, the best cutoff point, and the sensitivity and specificity at the point were calculated. In addition, we calculated the gray zone, which ranges between the two points where sensitivity and specificity, respectively, become 90%. In phase 1, the final model of the multivariable logistic regression analysis included the following 4 predictors: age (logarithm odds ratios [OR], -0.38; 95% CI, -0.81 to 0.00), Pediatric Anesthesia Behavior score (logarithm OR, 0.65; 95% CI, -0.09 to 1.40), anesthesia time (logarithm OR, 0.60; 95% CI, -0.18 to 1.19), and operative procedure (logarithm OR, 2.53; 95% CI, 1.30-3.75 for strabismus surgery and logarithm OR, 2.71; 95% CI, 0.99-4.45 for tonsillectomy). The EA risk scale included these 4 predictors and ranged from 1 to 23 points. In phase 2, the incidence of EA was 39%. The c-index of phase 1 was 0.84 (95% CI, 0.74-0.94), and the c-index of phase 2 was 0.81 (95% CI, 0.72-0.89). The best cutoff point for the EA risk scale was 11 (sensitivity = 87% and specificity = 61%). The gray zone ranged from 10 to 13 points, and included 38% of patients. We developed and validated an EA risk scale for children receiving sevoflurane anesthesia. In our validation cohort, this scale has excellent predictive performance (c-index > 0.8). The EA risk scale could be used to predict EA in children and adopt a preventive strategy for those at high risk. This score-based preventive approach should be studied prospectively to assess the safety and efficacy of such a strategy.

Renormalization group scale-setting from the action—a road to modified gravity theories

NASA Astrophysics Data System (ADS)

Domazet, Silvije; Štefančić, Hrvoje

2012-12-01

The renormalization group (RG) corrected gravitational action in Einstein-Hilbert and other truncations is considered. The running scale of the RG is treated as a scalar field at the level of the action and determined in a scale-setting procedure recently introduced by Koch and Ramirez for the Einstein-Hilbert truncation. The scale-setting procedure is elaborated for other truncations of the gravitational action and applied to several phenomenologically interesting cases. It is shown how the logarithmic dependence of the Newton's coupling on the RG scale leads to exponentially suppressed effective cosmological constant and how the scale-setting in particular RG-corrected gravitational theories yields the effective f(R) modified gravity theories with negative powers of the Ricci scalar R. The scale-setting at the level of the action at the non-Gaussian fixed point in Einstein-Hilbert and more general truncations is shown to lead to universal effective action quadratic in the Ricci tensor.

Carbothermal Production of Magnesium: Csiro's Magsonic™ Process

NASA Astrophysics Data System (ADS)

Prentice, Leon H.; Nagle, Michael W.; Barton, Timothy R. D.; Tassios, Steven; Kuan, Benny T.; Witt, Peter J.; Constanti-Carey, Keri K.

Carbothermal production has been recognized as conceptually the simplest and cleanest route to magnesium metal, but has suffered from technical challenges of development and scale-up. Work by CSIRO has now successfully demonstrated the technology using supersonic quenching of magnesium vapor (the MagSonic™ Process). Key barriers to process development have been overcome: the experimental program has achieved sustained operation, no nozzle blockage, minimal reversion, and safe handling of pyrophoric powders. The laboratory equipment has been operated at industrially relevant magnesium vapor concentrations (>25% Mg) for multiple runs with no blockage. Novel computational fluid dynamics (CFD) modeling of the shock quenching and metal vapor condensation has informed nozzle design and is supported by experimental data. Reversion below 10% has been demonstrated, and magnesium successfully purified (>99.9%) from the collected powder. Safe operating procedures have been developed and demonstrated, minimizing the risk of powder explosion. The MagSonic™ Process is now ready to progress to significantly larger scale and continuous operation.

A transparently scalable visualization architecture for exploring the universe.

PubMed

Fu, Chi-Wing; Hanson, Andrew J

2007-01-01

Modern astronomical instruments produce enormous amounts of three-dimensional data describing the physical Universe. The currently available data sets range from the solar system to nearby stars and portions of the Milky Way Galaxy, including the interstellar medium and some extrasolar planets, and extend out to include galaxies billions of light years away. Because of its gigantic scale and the fact that it is dominated by empty space, modeling and rendering the Universe is very different from modeling and rendering ordinary three-dimensional virtual worlds at human scales. Our purpose is to introduce a comprehensive approach to an architecture solving this visualization problem that encompasses the entire Universe while seeking to be as scale-neutral as possible. One key element is the representation of model-rendering procedures using power scaled coordinates (PSC), along with various PSC-based techniques that we have devised to generalize and optimize the conventional graphics framework to the scale domains of astronomical visualization. Employing this architecture, we have developed an assortment of scale-independent modeling and rendering methods for a large variety of astronomical models, and have demonstrated scale-insensitive interactive visualizations of the physical Universe covering scales ranging from human scale to the Earth, to the solar system, to the Milky Way Galaxy, and to the entire observable Universe.

A General Procedure to Assess the Internal Structure of a Noncognitive Measure--The Student360 Insight Program (S360) Time Management Scale. Research Report. ETS RR-11-42

ERIC Educational Resources Information Center

Ling, Guangming; Rijmen, Frank

2011-01-01

The factorial structure of the Time Management (TM) scale of the Student 360: Insight Program (S360) was evaluated based on a national sample. A general procedure with a variety of methods was introduced and implemented, including the computation of descriptive statistics, exploratory factor analysis (EFA), and confirmatory factor analysis (CFA).…

Nonlinear filtering properties of detrended fluctuation analysis

NASA Astrophysics Data System (ADS)

Kiyono, Ken; Tsujimoto, Yutaka

2016-11-01

Detrended fluctuation analysis (DFA) has been widely used for quantifying long-range correlation and fractal scaling behavior. In DFA, to avoid spurious detection of scaling behavior caused by a nonstationary trend embedded in the analyzed time series, a detrending procedure using piecewise least-squares fitting has been applied. However, it has been pointed out that the nonlinear filtering properties involved with detrending may induce instabilities in the scaling exponent estimation. To understand this issue, we investigate the adverse effects of the DFA detrending procedure on the statistical estimation. We show that the detrending procedure using piecewise least-squares fitting results in the nonuniformly weighted estimation of the root-mean-square deviation and that this property could induce an increase in the estimation error. In addition, for comparison purposes, we investigate the performance of a centered detrending moving average analysis with a linear detrending filter and sliding window DFA and show that these methods have better performance than the standard DFA.

Nutritional considerations in project planning.

PubMed

Mason, J; Garcia, M; Mitchell, J; Test, K; Henderson, C; Tabatabai, H

1985-05-01

This paper discusses procedures for "ex ante" assessment of likely nutritional effects of development projects. Reported are results of 1 field trial in the Philippines of the "ex ante" assessment procedure in terms of: its feasibility and timeliness and the recommendations for project design that can be made and their influence. In the procedure described, emphasis is placed on assessing likely direct effects--through income, environmental changes and access to services. Indirect effects through food output and prices are assessed qualitatievly. 2 primary questions are addressed in the "ex ante" assessment: 1) who is to benefit directly from the project, in relation to their need (measured in terms of nutrition) and 2) is there reason to suppose that these benefits will not improve their nutrition? The procedure began with an initial assessment to identify the main issues based on reviewing existing data and a short field visit; since there was insufficient information, a rapid nutrition survey was conducted and analyzed; recommendations for project design were made within the necessary time for inclusion. The assessment of the large-scale development project in the Philippines indicates priority to remote areas, small farmers and subsistence fishermen. It is concluded that production-oriented components (e.g., agricultural and infrastructure development) of the project appear likely to improve nutrition insofar as they reach the priority groups defiend above. There is little reason to believe that increased income will not improve nutrition. Finally, there is evidence that an intervention to improve water supply is likely to be effective. Limitations of the procedure are that the assessment is limitied to direct, microlevel effects; long-term influences on nutrition, through changes in the overall economy of the area, are not assessed. Also, the data used cannot easily quantify expected effects on nutrition of project participants. Future application of such procedures are seen to be important if they can be fully integrated with the overall project planning.

Improved Variable Selection Algorithm Using a LASSO-Type Penalty, with an Application to Assessing Hepatitis B Infection Relevant Factors in Community Residents

PubMed Central

Guo, Pi; Zeng, Fangfang; Hu, Xiaomin; Zhang, Dingmei; Zhu, Shuming; Deng, Yu; Hao, Yuantao

2015-01-01

Objectives In epidemiological studies, it is important to identify independent associations between collective exposures and a health outcome. The current stepwise selection technique ignores stochastic errors and suffers from a lack of stability. The alternative LASSO-penalized regression model can be applied to detect significant predictors from a pool of candidate variables. However, this technique is prone to false positives and tends to create excessive biases. It remains challenging to develop robust variable selection methods and enhance predictability. Material and methods Two improved algorithms denoted the two-stage hybrid and bootstrap ranking procedures, both using a LASSO-type penalty, were developed for epidemiological association analysis. The performance of the proposed procedures and other methods including conventional LASSO, Bolasso, stepwise and stability selection models were evaluated using intensive simulation. In addition, methods were compared by using an empirical analysis based on large-scale survey data of hepatitis B infection-relevant factors among Guangdong residents. Results The proposed procedures produced comparable or less biased selection results when compared to conventional variable selection models. In total, the two newly proposed procedures were stable with respect to various scenarios of simulation, demonstrating a higher power and a lower false positive rate during variable selection than the compared methods. In empirical analysis, the proposed procedures yielding a sparse set of hepatitis B infection-relevant factors gave the best predictive performance and showed that the procedures were able to select a more stringent set of factors. The individual history of hepatitis B vaccination, family and individual history of hepatitis B infection were associated with hepatitis B infection in the studied residents according to the proposed procedures. Conclusions The newly proposed procedures improve the identification of significant variables and enable us to derive a new insight into epidemiological association analysis. PMID:26214802

Pain perception of children undergoing nasendoscopy for investigation of voice and resonance disorders.

PubMed

Hay, Imogen; Oates, Jennifer; Giannini, Alessandra; Berkowitz, Robert; Rotenberg, Brian

2009-05-01

The primary objective of this descriptive and correlational study was to determine the level of pain and discomfort perceived by children undergoing nasendoscopy for investigation of voice and resonance disorders. The secondary objective was to explore whether gender, age, previous experience of painful or distressing medical procedures, and previous experience of nasendoscopy influenced the perception of pain during nasendoscopy. Twenty-three children self-reported the degree of pain perceived during nasendoscopy using the Wong-Baker Faces Pain Rating Scale. Parents also used this scale to rate their child's perceived pain. Otolaryngologists and speech pathologists rated the intensity and frequency of observed pain-related behaviors using the Child-Adult Medical Procedure Interaction Scale-Revised and the Procedure Behavior Checklist. Children perceived the procedure, on average, to be moderately painful, as did their parents. Only two children reported perceiving no pain during the procedure. The most frequently observed pain-related behaviors were muscle tension (86.96%), physical resistance (69.57%), requiring physical restraint (60.87%), crying (43.48%), and expressions of verbal pain (39.13%). No significant correlations were found between self-reported pain or observed pain and the variables of age, gender, previous experience of nasendoscopy, and previous experience of painful or distressing medical procedures, although children aged 4-7 years reported significantly more pain than children aged 8-18 years. Most children perceive nasendoscopy to be painful to some degree. This perceived pain occurred in conjunction with several observable pain-related behaviors that have the potential to interfere with the success of the procedure.

Immobilized lysozyme for the continuous lysis of lactic bacteria in wine: Bench-scale fluidized-bed reactor study.

PubMed

Cappannella, Elena; Benucci, Ilaria; Lombardelli, Claudio; Liburdi, Katia; Bavaro, Teodora; Esti, Marco

2016-11-01

Lysozyme from hen egg white (HEWL) was covalently immobilized on spherical supports based on microbial chitosan in order to develop a system for the continuous, efficient and food-grade enzymatic lysis of lactic bacteria (Oenococcus oeni) in white and red wine. The objective is to limit the sulfur dioxide dosage required to control malolactic fermentation, via a cell concentration typical during this process. The immobilization procedure was optimized in batch mode, evaluating the enzyme loading, the specific activity, and the kinetic parameters in model wine. Subsequently, a bench-scale fluidized-bed reactor was developed, applying the optimized process conditions. HEWL appeared more effective in the immobilized form than in the free one, when the reactor was applied in real white and red wine. This preliminary study suggests that covalent immobilization renders the enzyme less sensitive to the inhibitory effect of wine flavans. Copyright © 2016 Elsevier Ltd. All rights reserved.

Taming tosyl azide: the development of a scalable continuous diazo transfer process.

PubMed

Deadman, Benjamin J; O'Mahony, Rosella M; Lynch, Denis; Crowley, Daniel C; Collins, Stuart G; Maguire, Anita R

2016-04-07

Heat and shock sensitive tosyl azide was generated and used on demand in a telescoped diazo transfer process. Small quantities of tosyl azide were accessed in a 'one pot' batch procedure using shelf stable, readily available reagents. For large scale diazo transfer reactions tosyl azide was generated and used in a telescoped flow process, to mitigate the risks associated with handling potentially explosive reagents on scale. The in situ formed tosyl azide was used to rapidly perform diazo transfer to a range of acceptors, including β-ketoesters, β-ketoamides, malonate esters and β-ketosulfones. An effective in-line quench of sulfonyl azides was also developed, whereby a sacrificial acceptor molecule ensured complete consumption of any residual hazardous diazo transfer reagent. The telescoped diazo transfer process with in-line quenching was used to safely prepare over 21 g of an α-diazocarbonyl in >98% purity without any column chromatography.

The building blocks of a 'Liveable Neighbourhood': Identifying the key performance indicators for walking of an operational planning policy in Perth, Western Australia.

PubMed

Hooper, Paula; Knuiman, Matthew; Foster, Sarah; Giles-Corti, Billie

2015-11-01

Planning policy makers are requesting clearer guidance on the key design features required to build neighbourhoods that promote active living. Using a backwards stepwise elimination procedure (logistic regression with generalised estimating equations adjusting for demographic characteristics, self-selection factors, stage of construction and scale of development) this study identified specific design features (n=16) from an operational planning policy ("Liveable Neighbourhoods") that showed the strongest associations with walking behaviours (measured using the Neighbourhood Physical Activity Questionnaire). The interacting effects of design features on walking behaviours were also investigated. The urban design features identified were grouped into the "building blocks of a Liveable Neighbourhood", reflecting the scale, importance and sequencing of the design and implementation phases required to create walkable, pedestrian friendly developments. Copyright © 2015 Elsevier Ltd. All rights reserved.

Investigation of the effects of external current systems on the MAGSAT data utilizing grid cell modeling techniques

NASA Technical Reports Server (NTRS)

Klumpar, D. M. (Principal Investigator)

1982-01-01

Efforts in support of the development of a model of the magnetic fields due to ionospheric and magnetospheric electrical currents are discussed. Specifically, progress made in reading MAGSAT tapes and plotting the deviation of the measured magnetic field components with respect to a spherical harmonic model of the main geomagnetic field is reported. Initial tests of the modeling procedure developed to compute the ionosphere/magnetosphere-induced fields at satellite orbit are also described. The modeling technique utilizes a liner current element representation of the large scale current system.

Habitat Suitability Index Models: Yellow perch

USGS Publications Warehouse

Krieger, Douglas A.; Terrell, James W.; Nelson, Patrick C.

1983-01-01

A review and synthesis of existing information were used to develop riverine and lacustrine habitat models for yellow perch (Perca flavescens). The models are scaled to produce an index of habitat suitability between 0 (unsuitable habitat) to 1 (optimally suitable habitat) for riverine, lacustrine, and palustrine habitat in the 48 contiguous United States. Habitat Suitability Indexes (HSI's) are designed for use with the Habitat Evaluation Procedures developed by the U.S. Fish and Wildlife Service. Also included are discussions of Suitability Index (SI) curves as used in the Instream Flow Incremental Methodology (IFIM) and SI curves available for an IFIM analysis of yellow perch habitat.

Light aircraft crash safety program

NASA Technical Reports Server (NTRS)

Thomson, R. G.; Hayduk, R. J.

1974-01-01

NASA is embarked upon research and development tasks aimed at providing the general aviation industry with a reliable crashworthy airframe design technology. The goals of the NASA program are: reliable analytical techniques for predicting the nonlinear behavior of structures; significant design improvements of airframes; and simulated full-scale crash test data. The analytical tools will include both simplified procedures for estimating energy absorption characteristics and more complex computer programs for analysis of general airframe structures under crash loading conditions. The analytical techniques being developed both in-house and under contract are described, and a comparison of some analytical predictions with experimental results is shown.

Measuring the quality of structure and process in end-of-life care from the bereaved family perspective.

PubMed

Morita, Tatsuya; Hirai, Kei; Sakaguchi, Yukihiro; Maeyama, Etsuko; Tsuneto, Satoru; Shima, Yasuo

2004-06-01

Measurement of the structure/process of care is the first step in improving end-of-life care. The primary aim of this study was to psychometrically validate an instrument for directly measuring the bereaved family's perception of the necessity for improvement in structural/procedural aspects of palliative care. Different sets of questionnaires were sent to 800 and 425 families who lost family members at one of 70 certified palliative care units in Japan in the development and validation phases, respectively, and 281 families of the latter group in the follow-up phase. The participants were requested to fill out a newly-developed Care Evaluation Scale (CES), along with outcome measures (the perceived experience and satisfaction levels) and potential covariates (the degree of expectation, the Center for Epidemiologic Studies Depression Scale, and the Social Desirability Scale). We obtained 485, 310, and 202 responses in the development, validation, and follow-up phases (response rates: 64%, 75%, and 72%, respectively). The 28-item CES had an overall Cronbach's coefficient alpha of 0.98; the intra-class correlation coefficient in the test-retest examination was 0.57. A confirmatory factor analysis revealed 10 subscales: physical care (by physicians, by nurses), psycho-existential care, help with decision-making (for patients, for family), environment, family burden, cost, availability, and coordination/consistency. The CES subscales were only moderately correlated with the perceived-experience and satisfaction levels of corresponding areas (r=0.36-0.52 and 0.39-0.60, respectively). The CES score was not significantly associated with the degree of expectation, the changes of depression, or the Social Desirability Scale. The CES is a useful tool to measure the bereaved family's perception of the necessity for improvement in structural/procedural aspects of palliative care. The advantages of the CES are: 1) it specifically evaluates the structure and process of care, 2) it directly identifies needed improvements, 3) it is not affected by the degree of expectation, depression, or social desirability, and 4) it has satisfactory psychometric properties.

Theory and modeling of atmospheric turbulence, part 1

NASA Technical Reports Server (NTRS)

1984-01-01

The cascade transfer which is the only function to describe the mode coupling as the result of the nonlinear hydrodynamic state of turbulence is discussed. A kinetic theory combined with a scaling procedure was developed. The transfer function governs the non-linear mode coupling in strong turbulence. The master equation is consistent with the hydrodynamical system that describes the microdynamic state of turbulence and has the advantages to be homogeneous and have fewer nonlinear terms. The modes are scaled into groups to decipher the governing transport processes and statistical characteristics. An equation of vorticity transport describes the microdynamic state of two dimensional, isotropic and homogeneous, geostrophic turbulence. The equation of evolution of the macrovorticity is derived from group scaling in the form of the Fokker-Planck equation with memory. The microdynamic state of turbulence is transformed into the Liouville equation to derive the kinetic equation of the singlet distribution in turbulence. The collision integral contains a memory, which is analyzed with pair collision and the multiple collision. Two other kinetic equations are developed in parallel for the propagator and the transition probability for the interaction among the groups.

Psychometric properties of the Chinese-version Quality of Nursing Work Life Scale.

PubMed

Lee, Ya-Wen; Dai, Yu-Tzu; McCreary, Linda L; Yao, Grace; Brooks, Beth A

2014-09-01

In this study, we developed and tested the psychometric properties of the Chinese-version Quality of Nursing Work Life Scale along seven subscales: supportive milieu with security and professional recognition, work arrangement and workload, work/home life balance, head nurse's/supervisor's management style, teamwork and communication, nursing staffing and patient care, and milieu of respect and autonomy. An instrument-development procedure with three phases was conducted in seven hospitals in 2010-2011. Phase I comprised translation and the cultural-adaptation process, phase II comprised a pilot study, and phase III comprised a field-testing process. Purposive sampling was used in the pilot study (n = 150) and the large field study (n = 1254). Five new items were added, and 85.7% of the original items were retained in the 41 item Chinese version. Principal component analysis revealed that a model accounted for 56.6% of the variance with acceptable internal consistency, concurrent validity, and discriminant validity. This study gave evidence of reliability and validity of the 41 item Chinese-version Quality of Nursing Work Life Scale. © 2014 Wiley Publishing Asia Pty Ltd.

Neurodevelopmental Outcome and Health-related Quality of Life in Children With Single-ventricle Heart Disease Before Fontan Procedure.

PubMed

Reich, Bettina; Heye, Kristina; Tuura, Ruth; Beck, Ingrid; Wetterling, Kristina; Hahn, Andreas; Hofmann, Karoline; Schranz, Dietmar; Akintürk, Hakan; Latal, Beatrice; Knirsch, Walter

2017-12-05

Neurodevelopmental impairment and impaired quality of life constitute a major source of morbidity among children with complex congenital heart disease, in particular for single-ventricle (SV) morphologies. Risk factors and quality of life determining clinical and neurodevelopmental outcome at 2 years of age are examined. In a 2-center cohort study, 48 patients with SV morphology (26 hypoplastic left heart syndrome and 22 other types of univentricular heart defect) have been examined before Fontan procedure between 2010 and 2015. Patients were assessed with the Bayley Scales of Infant and Toddler Development, Third Version (Bayley-III), and the Preschool Children Quality of Life (TAPQOL) questionnaire. A total of 44 patients underwent hybrid procedure (n = 25), Norwood procedure (n = 7), or shunt or banding procedure (n = 12) as first surgery before subsequent bidirectional cavopulmonary anastomosis (n = 48). Median cognitive, language, and motor composite scores on the Bayley-III were 100 (range 65-120), 97 (68-124), and 97 (55-124), respectively. The language composite score was significantly below the norm (P = 0.025). Risk factors for poorer neurodevelopmental outcome were prolonged mechanical ventilation, longer days of hospital stay, and more reinterventions (all P < 0.05). Parents reported a good quality of life for their children. Children undergoing Fontan procedure show a favorable development and good quality of life. More complicated postoperative course and reinterventions constitute risk factors for impaired neurodevelopment. Improving postoperative management and implementing routine follow-up assessments aremeasures to further improve the neurodevelopmental outcome of this high-risk patient population. Copyright © 2017 Elsevier Inc. All rights reserved.

Effectiveness of external cold and vibration for procedural pain relief during peripheral intravenous cannulation in pediatric patients.

PubMed

Canbulat, Nejla; Ayhan, Fatma; Inal, Sevil

2015-02-01

The aim of this study was to investigate the effect of external cold and vibration stimulation via Buzzy on the pain and anxiety level of children during peripheral intravenous (IV) cannulation. This study was a prospective, randomized controlled trial. The sample consisted of 176 children ages 7 to 12 years who were randomly assigned to two groups: a control group that received no peripheral IV cannulation intervention and an experimental group that received external cold and vibration via Buzzy. The same nurse conducted the peripheral IV cannulation in all the children, and the same researcher applied the external cold and vibration to all the children. The external cold and the vibration were applied 1 minute before the peripheral IV cannulation procedure and continued until the end of the procedure. Preprocedural anxiety was assessed using the Children's Fear Scale, along with reports by the children, their parents, and an observer. Procedural anxiety was assessed with the Children's Fear Scale and the parents' and the observer's reports. Procedural pain was assessed using the Wong Baker Faces Scale and the visual analog scale self-reports of the children. Preprocedural anxiety did not differ significantly. Comparison of the two groups showed significantly lower pain and anxiety levels in the experimental group than in the control group during the peripheral IV cannulation. Buzzy can be considered to provide an effective combination of coldness and vibration. This method can be used during pediatric peripheral IV cannulation by pediatric nurses. Copyright © 2015 American Society for Pain Management Nursing. Published by Elsevier Inc. All rights reserved.

The renormalization scale-setting problem in QCD

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wu, Xing-Gang; Brodsky, Stanley J.; Mojaza, Matin

2013-09-01

A key problem in making precise perturbative QCD predictions is to set the proper renormalization scale of the running coupling. The conventional scale-setting procedure assigns an arbitrary range and an arbitrary systematic error to fixed-order pQCD predictions. In fact, this ad hoc procedure gives results which depend on the choice of the renormalization scheme, and it is in conflict with the standard scale-setting procedure used in QED. Predictions for physical results should be independent of the choice of the scheme or other theoretical conventions. We review current ideas and points of view on how to deal with the renormalization scalemore » ambiguity and show how to obtain renormalization scheme- and scale-independent estimates. We begin by introducing the renormalization group (RG) equation and an extended version, which expresses the invariance of physical observables under both the renormalization scheme and scale-parameter transformations. The RG equation provides a convenient way for estimating the scheme- and scale-dependence of a physical process. We then discuss self-consistency requirements of the RG equations, such as reflexivity, symmetry, and transitivity, which must be satisfied by a scale-setting method. Four typical scale setting methods suggested in the literature, i.e., the Fastest Apparent Convergence (FAC) criterion, the Principle of Minimum Sensitivity (PMS), the Brodsky–Lepage–Mackenzie method (BLM), and the Principle of Maximum Conformality (PMC), are introduced. Basic properties and their applications are discussed. We pay particular attention to the PMC, which satisfies all of the requirements of RG invariance. Using the PMC, all non-conformal terms associated with the β-function in the perturbative series are summed into the running coupling, and one obtains a unique, scale-fixed, scheme-independent prediction at any finite order. The PMC provides the principle underlying the BLM method, since it gives the general rule for extending BLM up to any perturbative order; in fact, they are equivalent to each other through the PMC–BLM correspondence principle. Thus, all the features previously observed in the BLM literature are also adaptable to the PMC. The PMC scales and the resulting finite-order PMC predictions are to high accuracy independent of the choice of the initial renormalization scale, and thus consistent with RG invariance. The PMC is also consistent with the renormalization scale-setting procedure for QED in the zero-color limit. The use of the PMC thus eliminates a serious systematic scale error in perturbative QCD predictions, greatly improving the precision of empirical tests of the Standard Model and their sensitivity to new physics.« less

Modelling strategies to predict the multi-scale effects of rural land management change

NASA Astrophysics Data System (ADS)

Bulygina, N.; Ballard, C. E.; Jackson, B. M.; McIntyre, N.; Marshall, M.; Reynolds, B.; Wheater, H. S.

2011-12-01

Changes to the rural landscape due to agricultural land management are ubiquitous, yet predicting the multi-scale effects of land management change on hydrological response remains an important scientific challenge. Much empirical research has been of little generic value due to inadequate design and funding of monitoring programmes, while the modelling issues challenge the capability of data-based, conceptual and physics-based modelling approaches. In this paper we report on a major UK research programme, motivated by a national need to quantify effects of agricultural intensification on flood risk. Working with a consortium of farmers in upland Wales, a multi-scale experimental programme (from experimental plots to 2nd order catchments) was developed to address issues of upland agricultural intensification. This provided data support for a multi-scale modelling programme, in which highly detailed physics-based models were conditioned on the experimental data and used to explore effects of potential field-scale interventions. A meta-modelling strategy was developed to represent detailed modelling in a computationally-efficient manner for catchment-scale simulation; this allowed catchment-scale quantification of potential management options. For more general application to data-sparse areas, alternative approaches were needed. Physics-based models were developed for a range of upland management problems, including the restoration of drained peatlands, afforestation, and changing grazing practices. Their performance was explored using literature and surrogate data; although subject to high levels of uncertainty, important insights were obtained, of practical relevance to management decisions. In parallel, regionalised conceptual modelling was used to explore the potential of indices of catchment response, conditioned on readily-available catchment characteristics, to represent ungauged catchments subject to land management change. Although based in part on speculative relationships, significant predictive power was derived from this approach. Finally, using a formal Bayesian procedure, these different sources of information were combined with local flow data in a catchment-scale conceptual model application , i.e. using small-scale physical properties, regionalised signatures of flow and available flow measurements.

Evaluation of Expert Systems in Decisionmaking Organizations

DTIC Science & Technology

1988-07-01

Abacus Press, Tunbridge Wells. Levis, A. H., 1984. "Information Processing and Decisionmaking Organizations: A Mathematical Description." I Large Scale Systems , Vol. 7, pp. 151-163. hI2 II I, Ie ... intelligence and especially expert systems. This paper presents a procedure for assessing to what extent the measures of performance of an organization are...aids that is receiving attention in the development community is based on artificial intelligence and especially expert systems. This paper presents a

Development of a Laboratory-scale Test Facility to Investigate Armor Solutions against Buried Explosive Threats

DTIC Science & Technology

2009-12-01

Centro de Estudios Superiores Navales Mexican Navy México, DF México 5. Dr. Jose O. Sinibaldi Naval Postgraduate School Monterey, CA. 6. Dr. Robert S. Hixson Naval Postgraduate School Monterey, CA ...EXPERIMENTAL SETUP AND PROCEDURE............................................. 67 A. HIGH-SPEED VISION SYSTEM...Mexican Navy, “Con la Satisfacción del Deber Cumplido.” To all of them, I am sincerely grateful. xviii THIS PAGE INTENTIONALLY LEFT BLANK xix

Quantum Tomography via Compressed Sensing: Error Bounds, Sample Complexity and Efficient Estimators

DTIC Science & Technology

2012-09-27

particular, we require no entangling gates or ancillary systems for the procedure. In contrast with [19], our method is not restricted to processes that are...of states, such as those recently developed for use with permutation-invariant states [60], matrix product states [61] or multi-scale entangled states...process tomography: first prepare the Jamiołkowski state ρE (by adjoining an ancilla, preparing the maximally entangled state |ψ0, and applying E); then

Concepts for a global resources information system

NASA Technical Reports Server (NTRS)

Billingsley, F. C.; Urena, J. L.

1984-01-01

The objective of the Global Resources Information System (GRIS) is to establish an effective and efficient information management system to meet the data access requirements of NASA and NASA-related scientists conducting large-scale, multi-disciplinary, multi-mission scientific investigations. Using standard interfaces and operating guidelines, diverse data systems can be integrated to provide the capabilities to access and process multiple geographically dispersed data sets and to develop the necessary procedures and algorithms to derive global resource information.

A quality assessment tool for markup-based clinical guidelines.

PubMed

Shalom, Erez; Shahar, Yuval; Taieb-Maimon, Meirav; Lunenfeld, Eitan

2008-11-06

We introduce a tool for quality assessment of procedural and declarative knowledge. We developed this tool for evaluating the specification of mark-up-based clinical GLs. Using this graphical tool, the expert physician and knowledge engineer collaborate to perform scoring, using pre-defined scoring scale, each of the knowledge roles of the mark-ups, comparing it to a gold standard. The tool enables scoring the mark-ups simultaneously at different sites by different users at different locations.

An In Vitro Evaluation of Alumina, Zirconia, and Lithium Disilicate Surface Roughness Caused by Two Scaling Instruments.

PubMed

Vigolo, Paolo; Buzzo, Ottavia; Buzzo, Maurizio; Mutinelli, Sabrina

2017-02-01

Plaque control is crucial for the prevention of inflammatory periodontal disease. Hand scaling instruments have been shown to be efficient for the removal of plaque; however, routine periodontal prophylactic procedures may modify the surface profile of restorative materials. The purpose of this study was to assess in vitro the changes in roughness of alumina, zirconia, and lithium disilicate surfaces treated by two hand scaling instruments. Forty-eight alumina specimens, 48 zirconia specimens, and 48 lithium disilicate specimens, were selected. All specimens were divided into three groups of 16 each; one group for each material was considered the control group and no scaling procedures were performed; the second group of each material was exposed to scaling with steel curettes simulating standard clinical conditions; the third group of each material was exposed to scaling with titanium curettes. After scaling, the surface roughness of the specimens was evaluated with a profilometer. First, a statistical test was carried out to evaluate the difference in surface roughness before the scaling procedure of the three materials was effected (Kruskal-Wallis test). Subsequently, the effect of curette material (steel and titanium) on roughness difference and roughness ratio was analyzed throughout the entire sample and within each material group, and a nonparametric test for dependent values was conducted (Wilcoxon signed-rank test). Finally, the roughness ratios of the three material groups were compared by means of a Kruskal-Wallis test and a Wilcoxon signed-rank test. Upon completion of profilometric evaluation, representative specimens from each group were prepared for SEM evaluation to evaluate the effects of the two scaling systems on the different surfaces qualitatively. After scaling procedure, the roughness profile value increased in all disks. Classifying the full sample according to curette used, the roughness of the disks treated with a steel curette reached a higher median value than that of the titanium group. Zirconia demonstrated the least significant increase in surface roughness. The result was 3.9 times of the initial value as compared to 4.3 times for alumina and 4.6 times for lithium disilicate. Comparison of profilometer readings before and after instrumentation, carried out with different hand scaling instruments, highlighted both a statistically and clinically relevant increase in material roughness. © 2015 by the American College of Prosthodontists.

A quasi randomized-controlled trial to evaluate the effectiveness of clowntherapy on children's anxiety and pain levels in emergency department.

PubMed

Felluga, Margherita; Rabach, Ingrid; Minute, Marta; Montico, Marcella; Giorgi, Rita; Lonciari, Isabella; Taddio, Andrea; Barbi, Egidio

2016-05-01

The aim of the study is to investigate if the presence of medical clowns during painful procedures in the emergency department (ED) affects children's anxiety and pain. Forty children (4-11 years) admitted to the ED with the need of painful procedures were prospectively enrolled. They were randomly assigned to the clown group, where children interacted with clowns or to the control group in which they were entertained by parents and ED nurses. The children's anxiety was assessed by the Children's Anxiety and Pain Scales; pain was evaluated with the Numerical Rating Scale and Wong-Backer Scale, according to the children's age. Staff and clown's opinions were evaluated by means of dedicated questionnaires. Children's anxiety levels in the clown group were significantly lower than those compared with the control group, while children's pain levels did not change between the two groups. The presence of clowns in the ED before and during painful procedures was effective in reducing children's anxiety. • Anxiety and fear caused by medical procedures exacerbate children's pain and may interfere with the procedure. • To reduce anxiety, fear, and pain and to facilitate patient's evaluation, different non-pharmacological approaches have been proposed and positive effects of laughter and humor have been reported. What is New: • The presence of clowns in the waiting room and in the ED during medical evaluation and painful procedures helps to reduce children's anxiety.

Development of a standardized training course for laparoscopic procedures using Delphi methodology.

PubMed

Bethlehem, Martijn S; Kramp, Kelvin H; van Det, Marc J; ten Cate Hoedemaker, Henk O; Veeger, Nicolaas J G M; Pierie, Jean Pierre E N

2014-01-01

Content, evaluation, and certification of laparoscopic skills and procedure training lack uniformity among different hospitals in The Netherlands. Within the process of developing a new regional laparoscopic training curriculum, a uniform and transferrable curriculum was constructed for a series of laparoscopic procedures. The aim of this study was to determine regional expert consensus regarding the key steps for laparoscopic appendectomy and cholecystectomy using Delphi methodology. Lists of suggested key steps for laparoscopic appendectomy and cholecystectomy were created using surgical textbooks, available guidelines, and local practice. A total of 22 experts, working for teaching hospitals throughout the region, were asked to rate the suggested key steps for both procedures on a Likert scale from 1-5. Consensus was reached with Crohnbach's α ≥ 0.90. Of the 22 experts, 21 completed and returned the survey (95%). Data analysis already showed consensus after the first round of Delphi on the key steps for laparoscopic appendectomy (Crohnbach's α = 0.92) and laparoscopic cholecystectomy (Crohnbach's α = 0.90). After the second round, 15 proposed key steps for laparoscopic appendectomy and 30 proposed key steps for laparoscopic cholecystectomy were rated as important (≥4 by at least 80% of the expert panel). These key steps were used for the further development of the training curriculum. By using the Delphi methodology, regional consensus was reached on the key steps for laparoscopic appendectomy and cholecystectomy. These key steps are going to be used for standardized training and evaluation purposes in a new regional laparoscopic curriculum. Copyright © 2014 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Measuring pretest-posttest change with a Rasch Rating Scale Model.

PubMed

Wolfe, E W; Chiu, C W

1999-01-01

When measures are taken on the same individual over time, it is difficult to determine whether observed differences are the result of changes in the person or changes in other facets of the measurement situation (e.g., interpretation of items or use of rating scale). This paper describes a method for disentangling changes in persons from changes in the interpretation of Likert-type questionnaire items and the use of rating scales (Wright, 1996a). The procedure relies on anchoring strategies to create a common frame of reference for interpreting measures that are taken at different times and provides a detailed illustration of how to implement these procedures using FACETS.

FT-IR spectra of the anti-HIV nucleoside analogue d4T (Stavudine). Solid state simulation by DFT methods and scaling by different procedures

NASA Astrophysics Data System (ADS)

Alcolea Palafox, M.; Kattan, D.; Afseth, N. K.

2018-04-01

A theoretical and experimental vibrational study of the anti-HIV d4T (stavudine or Zerit) nucleoside analogue was carried out. The predicted spectra in the three most stable conformers in the biological active anti-form of the isolated state were compared. Comparison of the conformers with those of the natural nucleoside thymidine was carried out. The calculated spectra were scaled by using different scaling procedures and three DFT methods. The TLSE procedure leads to the lowest error and is thus recommended for scaling. With the population of these conformers the IR gas-phase spectra were predicted. The crystal unit cell of the different polymorphism forms of d4T were simulated through dimer forms by using DFT methods. The scaled spectra of these dimer forms were compared. The FT-IR spectrum was recorded in the solid state in the 400-4000 cm-1 range. The respective vibrational bands were analyzed and assigned to different normal modes of vibration by comparison with the scaled vibrational values of the different dimer forms. Through this comparison, the polymorphous form of the solid state sample was identified. The study indicates that d4T exist only in the ketonic form in the solid state. The results obtained were in agreement with those determined in related anti-HIV nucleoside analogues.

PROC IRT: A SAS Procedure for Item Response Theory

PubMed Central

Matlock Cole, Ki; Paek, Insu

2017-01-01

This article reviews the procedure for item response theory (PROC IRT) procedure in SAS/STAT 14.1 to conduct item response theory (IRT) analyses of dichotomous and polytomous datasets that are unidimensional or multidimensional. The review provides an overview of available features, including models, estimation procedures, interfacing, input, and output files. A small-scale simulation study evaluates the IRT model parameter recovery of the PROC IRT procedure. The use of the IRT procedure in Statistical Analysis Software (SAS) may be useful for researchers who frequently utilize SAS for analyses, research, and teaching.

Conditional Standard Errors of Measurement for Scale Scores.

ERIC Educational Resources Information Center

Kolen, Michael J.; And Others

1992-01-01

A procedure is described for estimating the reliability and conditional standard errors of measurement of scale scores incorporating the discrete transformation of raw scores to scale scores. The method is illustrated using a strong true score model, and practical applications are described. (SLD)

Structure-based conformational preferences of amino acids

PubMed Central

Koehl, Patrice; Levitt, Michael

1999-01-01

Proteins can be very tolerant to amino acid substitution, even within their core. Understanding the factors responsible for this behavior is of critical importance for protein engineering and design. Mutations in proteins have been quantified in terms of the changes in stability they induce. For example, guest residues in specific secondary structures have been used as probes of conformational preferences of amino acids, yielding propensity scales. Predicting these amino acid propensities would be a good test of any new potential energy functions used to mimic protein stability. We have recently developed a protein design procedure that optimizes whole sequences for a given target conformation based on the knowledge of the template backbone and on a semiempirical potential energy function. This energy function is purely physical, including steric interactions based on a Lennard-Jones potential, electrostatics based on a Coulomb potential, and hydrophobicity in the form of an environment free energy based on accessible surface area and interatomic contact areas. Sequences designed by this procedure for 10 different proteins were analyzed to extract conformational preferences for amino acids. The resulting structure-based propensity scales show significant agreements with experimental propensity scale values, both for α-helices and β-sheets. These results indicate that amino acid conformational preferences are a natural consequence of the potential energy we use. This confirms the accuracy of our potential and indicates that such preferences should not be added as a design criterion. PMID:10535955

A multi-scale homogenization model for fine-grained porous viscoplastic polycrystals: I - Finite-strain theory

NASA Astrophysics Data System (ADS)

Song, Dawei; Ponte Castañeda, P.

2018-06-01

We make use of the recently developed iterated second-order homogenization method to obtain finite-strain constitutive models for the macroscopic response of porous polycrystals consisting of large pores randomly distributed in a fine-grained polycrystalline matrix. The porous polycrystal is modeled as a three-scale composite, where the grains are described by single-crystal viscoplasticity and the pores are assumed to be large compared to the grain size. The method makes use of a linear comparison composite (LCC) with the same substructure as the actual nonlinear composite, but whose local properties are chosen optimally via a suitably designed variational statement. In turn, the effective properties of the resulting three-scale LCC are determined by means of a sequential homogenization procedure, utilizing the self-consistent estimates for the effective behavior of the polycrystalline matrix, and the Willis estimates for the effective behavior of the porous composite. The iterated homogenization procedure allows for a more accurate characterization of the properties of the matrix by means of a finer "discretization" of the properties of the LCC to obtain improved estimates, especially at low porosities, high nonlinearties and high triaxialities. In addition, consistent homogenization estimates for the average strain rate and spin fields in the pores and grains are used to develop evolution laws for the substructural variables, including the porosity, pore shape and orientation, as well as the "crystallographic" and "morphological" textures of the underlying matrix. In Part II of this work has appeared in Song and Ponte Castañeda (2018b), the model will be used to generate estimates for both the instantaneous effective response and the evolution of the microstructure for porous FCC and HCP polycrystals under various loading conditions.

Techniques for computer-aided analysis of ERTS-1 data, useful in geologic, forest and water resource surveys. [Colorado Rocky Mountains

NASA Technical Reports Server (NTRS)

Hoffer, R. M.

1974-01-01

Forestry, geology, and water resource applications were the focus of this study, which involved the use of computer-implemented pattern-recognition techniques to analyze ERTS-1 data. The results have proven the value of computer-aided analysis techniques, even in areas of mountainous terrain. Several analysis capabilities have been developed during these ERTS-1 investigations. A procedure to rotate, deskew, and geometrically scale the MSS data results in 1:24,000 scale printouts that can be directly overlayed on 7 1/2 minutes U.S.G.S. topographic maps. Several scales of computer-enhanced "false color-infrared" composites of MSS data can be obtained from a digital display unit, and emphasize the tremendous detail present in the ERTS-1 data. A grid can also be superimposed on the displayed data to aid in specifying areas of interest.

Applying Superresolution Localization-Based Microscopy to Neurons

PubMed Central

ZHONG, HAINING

2016-01-01

Proper brain function requires the precise localization of proteins and signaling molecules on a nanometer scale. The examination of molecular organization at this scale has been difficult in part because it is beyond the reach of conventional, diffraction-limited light microscopy. The recently developed method of superresolution, localization-based fluorescent microscopy (LBM), such as photoactivated localization microscopy (PALM) and stochastic optical reconstruction microscopy (STORM), has demonstrated a resolving power at a 10 nm scale and is poised to become a vital tool in modern neuroscience research. Indeed, LBM has revealed previously unknown cellular architectures and organizational principles in neurons. Here, we discuss the principles of LBM, its current applications in neuroscience, and the challenges that must be met before its full potential is achieved. We also present the unpublished results of our own experiments to establish a sample preparation procedure for applying LBM to study brain tissue. PMID:25648102

Use of the Morlet mother wavelet in the frequency-scale domain decomposition technique for the modal identification of ambient vibration responses

NASA Astrophysics Data System (ADS)

Le, Thien-Phu

2017-10-01

The frequency-scale domain decomposition technique has recently been proposed for operational modal analysis. The technique is based on the Cauchy mother wavelet. In this paper, the approach is extended to the Morlet mother wavelet, which is very popular in signal processing due to its superior time-frequency localization. Based on the regressive form and an appropriate norm of the Morlet mother wavelet, the continuous wavelet transform of the power spectral density of ambient responses enables modes in the frequency-scale domain to be highlighted. Analytical developments first demonstrate the link between modal parameters and the local maxima of the continuous wavelet transform modulus. The link formula is then used as the foundation of the proposed modal identification method. Its practical procedure, combined with the singular value decomposition algorithm, is presented step by step. The proposition is finally verified using numerical examples and a laboratory test.

In-Situ Dating on Mars: The Potential of OSL Dating

NASA Technical Reports Server (NTRS)

Blair, M. W.; Kalchgruber, R.; Yukihara, E. G.; Bulur, E.; Kim, S. S.; McKeever, W. S.

2004-01-01

More and more evidence is being accumulated that Mars has experienced aeolian, fluvial, and periglacial activity in the (relatively) recent past [1, 2, 3]. However, the temporal scale on which these processes took place is very poorly constrained since crater counting has errors comparable to the age for younger terrains (approx. 1 Ma). Consequently, many researchers have called for methods to establish the climatic and geomorphic history of Mars [4]. Lepper and McKeever [5] suggested developing optically stimulated luminescence (OSL) dating techniques for in-situ dating of martian sediments. Electron paramagnetic resonance (EPR) is closely related to OSL and could easily be incorporated on the same instrument platform [6]. These two methods can aid in developing a geological and climatic history of Mars over the last approx. one million years. Since the initial investigations, work has been carried out to develop OSL instrumentation and dating procedures that are suitable to the unique challenges of the martian environment. In this paper, we highlight the advances made in this project, focusing on OSL dating principles, assumptions, and procedures.

An improved filter elution and cell culture assay procedure for evaluating public groundwater systems for culturable enteroviruses.

PubMed

Dahling, Daniel R

2002-01-01

Large-scale virus studies of groundwater systems require practical and sensitive procedures for both sample processing and viral assay. Filter adsorption-elution procedures have traditionally been used to process large-volume water samples for viruses. In this study, five filter elution procedures using cartridge filters were evaluated for their effectiveness in processing samples. Of the five procedures tested, the third method, which incorporated two separate beef extract elutions (one being an overnight filter immersion in beef extract), recovered 95% of seeded poliovirus compared with recoveries of 36 to 70% for the other methods. For viral enumeration, an expanded roller bottle quantal assay was evaluated using seeded poliovirus. This cytopathic-based method was considerably more sensitive than the standard plaque assay method. The roller bottle system was more economical than the plaque assay for the evaluation of comparable samples. Using roller bottles required less time and manipulation than the plaque procedure and greatly facilitated the examination of large numbers of samples. The combination of the improved filter elution procedure and the roller bottle assay for viral analysis makes large-scale virus studies of groundwater systems practical. This procedure was subsequently field tested during a groundwater study in which large-volume samples (exceeding 800 L) were processed through the filters.

Development of a Hybrid RANS/LES Method for Turbulent Mixing Layers

NASA Technical Reports Server (NTRS)

Georgiadis, Nicholas J.; Alexander, J. Iwan D.; Reshotko, Eli

2001-01-01

Significant research has been underway for several years in NASA Glenn Research Center's nozzle branch to develop advanced computational methods for simulating turbulent flows in exhaust nozzles. The primary efforts of this research have concentrated on improving our ability to calculate the turbulent mixing layers that dominate flows both in the exhaust systems of modern-day aircraft and in those of hypersonic vehicles under development. As part of these efforts, a hybrid numerical method was recently developed to simulate such turbulent mixing layers. The method developed here is intended for configurations in which a dominant structural feature provides an unsteady mechanism to drive the turbulent development in the mixing layer. Interest in Large Eddy Simulation (LES) methods have increased in recent years, but applying an LES method to calculate the wide range of turbulent scales from small eddies in the wall-bounded regions to large eddies in the mixing region is not yet possible with current computers. As a result, the hybrid method developed here uses a Reynolds-averaged Navier-Stokes (RANS) procedure to calculate wall-bounded regions entering a mixing section and uses a LES procedure to calculate the mixing-dominated regions. A numerical technique was developed to enable the use of the hybrid RANS-LES method on stretched, non-Cartesian grids. With this technique, closure for the RANS equations is obtained by using the Cebeci-Smith algebraic turbulence model in conjunction with the wall-function approach of Ota and Goldberg. The LES equations are closed using the Smagorinsky subgrid scale model. Although the function of the Cebeci-Smith model to replace all of the turbulent stresses is quite different from that of the Smagorinsky subgrid model, which only replaces the small subgrid turbulent stresses, both are eddy viscosity models and both are derived at least in part from mixing-length theory. The similar formulation of these two models enables the RANS and LES equations to be solved with a single solution scheme and computational grid. The hybrid RANS-LES method has been applied to a benchmark compressible mixing layer experiment in which two isolated supersonic streams, separated by a splitter plate, provide the flows to a constant-area mixing section. Although the configuration is largely two dimensional in nature, three-dimensional calculations were found to be necessary to enable disturbances to develop in three spatial directions and to transition to turbulence. The flow in the initial part of the mixing section consists of a periodic vortex shedding downstream of the splitter plate trailing edge. This organized vortex shedding then rapidly transitions to a turbulent structure, which is very similar to the flow development observed in the experiments. Although the qualitative nature of the large-scale turbulent development in the entire mixing section is captured well by the LES part of the current hybrid method, further efforts are planned to directly calculate a greater portion of the turbulence spectrum and to limit the subgrid scale modeling to only the very small scales. This will be accomplished by the use of higher accuracy solution schemes and more powerful computers, measured both in speed and memory capabilities.

What Do You Think You Are Measuring? A Mixed-Methods Procedure for Assessing the Content Validity of Test Items and Theory-Based Scaling

PubMed Central

Koller, Ingrid; Levenson, Michael R.; Glück, Judith

2017-01-01

The valid measurement of latent constructs is crucial for psychological research. Here, we present a mixed-methods procedure for improving the precision of construct definitions, determining the content validity of items, evaluating the representativeness of items for the target construct, generating test items, and analyzing items on a theoretical basis. To illustrate the mixed-methods content-scaling-structure (CSS) procedure, we analyze the Adult Self-Transcendence Inventory, a self-report measure of wisdom (ASTI, Levenson et al., 2005). A content-validity analysis of the ASTI items was used as the basis of psychometric analyses using multidimensional item response models (N = 1215). We found that the new procedure produced important suggestions concerning five subdimensions of the ASTI that were not identifiable using exploratory methods. The study shows that the application of the suggested procedure leads to a deeper understanding of latent constructs. It also demonstrates the advantages of theory-based item analysis. PMID:28270777