ERIC Educational Resources Information Center
Alexander, George
1984-01-01
Discusses small-scale integrated (SSI), medium-scale integrated (MSI), large-scale integrated (LSI), very large-scale integrated (VLSI), and ultra large-scale integrated (ULSI) chips. The development and properties of these chips, uses of gallium arsenide, Josephson devices (two superconducting strips sandwiching a thin insulator), and future…
Microfluidic large-scale integration: the evolution of design rules for biological automation.
Melin, Jessica; Quake, Stephen R
2007-01-01
Microfluidic large-scale integration (mLSI) refers to the development of microfluidic chips with thousands of integrated micromechanical valves and control components. This technology is utilized in many areas of biology and chemistry and is a candidate to replace today's conventional automation paradigm, which consists of fluid-handling robots. We review the basic development of mLSI and then discuss design principles of mLSI to assess the capabilities and limitations of the current state of the art and to facilitate the application of mLSI to areas of biology. Many design and practical issues, including economies of scale, parallelization strategies, multiplexing, and multistep biochemical processing, are discussed. Several microfluidic components used as building blocks to create effective, complex, and highly integrated microfluidic networks are also highlighted.
Report on phase 1 of the Microprocessor Seminar. [and associated large scale integration
NASA Technical Reports Server (NTRS)
1977-01-01
Proceedings of a seminar on microprocessors and associated large scale integrated (LSI) circuits are presented. The potential for commonality of device requirements, candidate processes and mechanisms for qualifying candidate LSI technologies for high reliability applications, and specifications for testing and testability were among the topics discussed. Various programs and tentative plans of the participating organizations in the development of high reliability LSI circuits are given.
LSI logic for phase-control rectifiers
NASA Technical Reports Server (NTRS)
Dolland, C.
1980-01-01
Signals for controlling phase-controlled rectifier circuit are generated by combinatorial logic than can be implemented in large-scale integration (LSI). LSI circuit saves space, weight, and assembly time compared to previous controls that employ one-shot multivibrators, latches, and capacitors. LSI logic functions by sensing three phases of ac power source and by comparing actual currents with intended currents.
Recent developments in microfluidic large scale integration.
Araci, Ismail Emre; Brisk, Philip
2014-02-01
In 2002, Thorsen et al. integrated thousands of micromechanical valves on a single microfluidic chip and demonstrated that the control of the fluidic networks can be simplified through multiplexors [1]. This enabled realization of highly parallel and automated fluidic processes with substantial sample economy advantage. Moreover, the fabrication of these devices by multilayer soft lithography was easy and reliable hence contributed to the power of the technology; microfluidic large scale integration (mLSI). Since then, mLSI has found use in wide variety of applications in biology and chemistry. In the meantime, efforts to improve the technology have been ongoing. These efforts mostly focus on; novel materials, components, micromechanical valve actuation methods, and chip architectures for mLSI. In this review, these technological advances are discussed and, recent examples of the mLSI applications are summarized. Copyright © 2013 Elsevier Ltd. All rights reserved.
Shao, Chenzhong; Tanaka, Shuji; Nakayama, Takahiro; Hata, Yoshiyuki; Muroyama, Masanori
2018-01-15
For installing many sensors in a limited space with a limited computing resource, the digitization of the sensor output at the site of sensation has advantages such as a small amount of wiring, low signal interference and high scalability. For this purpose, we have developed a dedicated Complementary Metal-Oxide-Semiconductor (CMOS) Large-Scale Integration (LSI) (referred to as "sensor platform LSI") for bus-networked Micro-Electro-Mechanical-Systems (MEMS)-LSI integrated sensors. In this LSI, collision avoidance, adaptation and event-driven functions are simply implemented to relieve data collision and congestion in asynchronous serial bus communication. In this study, we developed a network system with 48 sensor platform LSIs based on Printed Circuit Board (PCB) in a backbone bus topology with the bus length being 2.4 m. We evaluated the serial communication performance when 48 LSIs operated simultaneously with the adaptation function. The number of data packets received from each LSI was almost identical, and the average sampling frequency of 384 capacitance channels (eight for each LSI) was 73.66 Hz.
Analyzing CMOS/SOS fabrication for LSI arrays
NASA Technical Reports Server (NTRS)
Ipri, A. C.
1978-01-01
Report discusses set of design rules that have been developed as result of work with test arrays. Set of optimum dimensions is given that would maximize process output and would correspondingly minimize costs in fabrication of large-scale integration (LSI) arrays.
Shao, Chenzhong; Tanaka, Shuji; Nakayama, Takahiro; Hata, Yoshiyuki
2018-01-01
For installing many sensors in a limited space with a limited computing resource, the digitization of the sensor output at the site of sensation has advantages such as a small amount of wiring, low signal interference and high scalability. For this purpose, we have developed a dedicated Complementary Metal-Oxide-Semiconductor (CMOS) Large-Scale Integration (LSI) (referred to as “sensor platform LSI”) for bus-networked Micro-Electro-Mechanical-Systems (MEMS)-LSI integrated sensors. In this LSI, collision avoidance, adaptation and event-driven functions are simply implemented to relieve data collision and congestion in asynchronous serial bus communication. In this study, we developed a network system with 48 sensor platform LSIs based on Printed Circuit Board (PCB) in a backbone bus topology with the bus length being 2.4 m. We evaluated the serial communication performance when 48 LSIs operated simultaneously with the adaptation function. The number of data packets received from each LSI was almost identical, and the average sampling frequency of 384 capacitance channels (eight for each LSI) was 73.66 Hz. PMID:29342923
Custom large scale integrated circuits for spaceborne SAR processors
NASA Technical Reports Server (NTRS)
Tyree, V. C.
1978-01-01
The application of modern LSI technology to the development of a time-domain azimuth correlator for SAR processing is discussed. General design requirements for azimuth correlators for missions such as SEASAT-A, Venus orbital imaging radar (VOIR), and shuttle imaging radar (SIR) are summarized. Several azimuth correlator architectures that are suitable for implementation using custom LSI devices are described. Technical factors pertaining to selection of appropriate LSI technologies are discussed, and the maturity of alternative technologies for spacecraft applications are reported in the context of expected space mission launch dates. The preliminary design of a custom LSI time-domain azimuth correlator device (ACD) being developed for use in future SAR processors is detailed.
Effect of Bypass Capacitor in Common-mode Noise Reduction Technique for Automobile PCB
NASA Astrophysics Data System (ADS)
Uno, Takanori; Ichikawa, Kouji; Mabuchi, Yuichi; Nakamura, Atushi
In this letter, we studied the use of common mode noise reduction technique for in-vehicle electronic equipment, each comprising large-scale integrated circuit (LSI), printed circuit board (PCB), wiring harnesses, and ground plane. We have improved the model circuit of the common mode noise that flows to the wire harness to add the effect of by-pass capacitors located near an LSI.
The Making of a Government LSI - From Warfare Capability to Operational System
2015-04-30
continues to evolve and implement Lead System Integrator (LSI) acquisition strategies, they have started to define numerous program initiatives that...employ more integrated engineering and management processes and techniques. These initiatives are developing varying acquisition approaches that define (1...government LSI transformation. Navy Systems Commands have begun adding a higher level of integration into their acquisition process with the
Jiang, Chao; Zhang, Hongyan; Wang, Jia; Wang, Yaru; He, Heng; Liu, Rui; Zhou, Fangyuan; Deng, Jialiang; Li, Pengcheng; Luo, Qingming
2011-11-01
Laser speckle imaging (LSI) is a noninvasive and full-field optical imaging technique which produces two-dimensional blood flow maps of tissues from the raw laser speckle images captured by a CCD camera without scanning. We present a hardware-friendly algorithm for the real-time processing of laser speckle imaging. The algorithm is developed and optimized specifically for LSI processing in the field programmable gate array (FPGA). Based on this algorithm, we designed a dedicated hardware processor for real-time LSI in FPGA. The pipeline processing scheme and parallel computing architecture are introduced into the design of this LSI hardware processor. When the LSI hardware processor is implemented in the FPGA running at the maximum frequency of 130 MHz, up to 85 raw images with the resolution of 640×480 pixels can be processed per second. Meanwhile, we also present a system on chip (SOC) solution for LSI processing by integrating the CCD controller, memory controller, LSI hardware processor, and LCD display controller into a single FPGA chip. This SOC solution also can be used to produce an application specific integrated circuit for LSI processing.
Microprocessor Seminar, phase 2
NASA Technical Reports Server (NTRS)
Scott, W. R.
1977-01-01
Workshop sessions and papers were devoted to various aspects of microprocessor and large scale integrated circuit technology. Presentations were made on advanced LSI developments for high reliability military and NASA applications. Microprocessor testing techniques were discussed, and test data were presented. High reliability procurement specifications were also discussed.
Space transportation booster engine thrust chamber technology, large scale injector
NASA Technical Reports Server (NTRS)
Schneider, J. A.
1993-01-01
The objective of the Large Scale Injector (LSI) program was to deliver a 21 inch diameter, 600,000 lbf thrust class injector to NASA/MSFC for hot fire testing. The hot fire test program would demonstrate the feasibility and integrity of the full scale injector, including combustion stability, chamber wall compatibility (thermal management), and injector performance. The 21 inch diameter injector was delivered in September of 1991.
Interactive graphical computer-aided design system
NASA Technical Reports Server (NTRS)
Edge, T. M.
1975-01-01
System is used for design, layout, and modification of large-scale-integrated (LSI) metal-oxide semiconductor (MOS) arrays. System is structured around small computer which provides real-time support for graphics storage display unit with keyboard, slave display unit, hard copy unit, and graphics tablet for designer/computer interface.
Hokuto, Toshiki; Yasukawa, Tomoyuki; Kunikata, Ryota; Suda, Atsushi; Inoue, Kumi Y; Ino, Kosuke; Matsue, Tomokazu; Mizutani, Fumio
2016-06-01
Electrochemical imaging is an excellent technique to characterize an activity of biomaterials, such as enzymes and cells. Large scale integration-based amperometric sensor (Bio-LSI) has been developed for the simultaneous and continuous detection of the concentration distribution of redox species generated by reactions of biomolecules. In this study, the Bio-LSI system was demonstrated to be applicable for simultaneous detection of different anaytes in multiple specimens. The multiple specimens containing human immunoglobulin G (hIgG) and mouse IgG (mIgG) were introduced into each channel of the upper substrate across the antibody lines for hIgG and mIgG on the lower substrate. Hydrogen peroxide generated by the enzyme reaction of glucose oxidase captured at intersections was simultaneously detected by 400 microelectrodes of Bio-LSI chip. The oxidation current increased with increasing the concentrations of hIgG, which can be detected in the range of 0.01-1.0 µg mL(-1) . Simultaneous detection of hIgG and mIgG in multiple specimens was achieved by using line pattern of both antibodies. Therefore, the presence of different target molecules in the multiple samples would be quantitatively and simultaneously visualized as a current image by the Bio-LSI system. Copyright © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Cancio, Leopoldo C.; Batchinsky, Andriy I.; Baker, William L.; Necsoiu, Corina; Salinas, José; Goldberger, Ary L.; Costa, Madalena D.
2013-01-01
Purpose We found that heart-rate (HR) complexity metrics, such as sample entropy (SampEn), identified trauma patients receiving lifesaving interventions (LSIs). We now aimed: 1) to test a new multiscale entropy (MSE) index; 2) to compare it to single-scale measures including SampEn; and 3) to assess different parameter values for calculation of SampEn and MSE. Methods This was a study of combat casualties in an Emergency Department (ED) in Iraq. ECGs of 70 acutely injured adults were recorded. Twelve underwent LSIs and 58 did not. LSIs included endotracheal intubation (9); tube thoracostomy (9); and emergency transfusion (4). From each ECG, a segment of 800 consecutive beats was selected. Off-line, R waves were detected and R-to-R (RR) interval time series were generated. SampEn, MSE, and time-domain measures of HR variability (mean HR, standard deviation, pNN20, pNN50, rMSSD) were computed. Results Differences in mean HR (LSI=111±33, NonLSI=90±17) were not significant. Systolic arterial pressure was statistically but not clinically different (LSI=123±19, NonLSI=135±19). SampEn (LSI=0.90±0.42, NonLSI=1.19±0.35, p<0.05) and MSE index (LSI = 2.58±2.55, NonLSI=5.67±2.48, p<0.001) differed significantly. Conclusions Complexity of HR dynamics over a range of time scales was lower in high-risk than in low-risk combat casualties and outperformed traditional vital signs. PMID:24140167
Chip level modeling of LSI devices
NASA Technical Reports Server (NTRS)
Armstrong, J. R.
1984-01-01
The advent of Very Large Scale Integration (VLSI) technology has rendered the gate level model impractical for many simulation activities critical to the design automation process. As an alternative, an approach to the modeling of VLSI devices at the chip level is described, including the specification of modeling language constructs important to the modeling process. A model structure is presented in which models of the LSI devices are constructed as single entities. The modeling structure is two layered. The functional layer in this structure is used to model the input/output response of the LSI chip. A second layer, the fault mapping layer, is added, if fault simulations are required, in order to map the effects of hardware faults onto the functional layer. Modeling examples for each layer are presented. Fault modeling at the chip level is described. Approaches to realistic functional fault selection and defining fault coverage for functional faults are given. Application of the modeling techniques to single chip and bit slice microprocessors is discussed.
NASA Astrophysics Data System (ADS)
Chan, YinThai
2016-03-01
Colloidal semiconductor nanocrystals are ideal fluorophores for clinical diagnostics, therapeutics, and highly sensitive biochip applications due to their high photostability, size-tunable color of emission and flexible surface chemistry. The relatively recent development of core-seeded semiconductor nanorods showed that the presence of a rod-like shell can confer even more advantageous physicochemical properties than their spherical counterparts, such as large multi-photon absorption cross-sections and facet-specific chemistry that can be exploited to deposit secondary nanoparticles. It may be envisaged that these highly fluorescent nanorods can be integrated with large scale integrated (LSI) microfluidic systems that allow miniaturization and integration of multiple biochemical processes in a single device at the nanoliter scale, resulting in a highly sensitive and automated detection platform. In this talk, I will describe a LSI microfluidic device that integrates RNA extraction, reverse transcription to cDNA, amplification and target pull-down to detect histidine decarboxylase (HDC) gene directly from human white blood cells samples. When anisotropic colloidal semiconductor nanorods (NRs) were used as the fluorescent readout, the detection limit was found to be 0.4 ng of total RNA, which was much lower than that obtained using spherical quantum dots (QDs) or organic dyes. This was attributed to the large action cross-section of NRs and their high probability of target capture in a pull-down detection scheme. The combination of large scale integrated microfluidics with highly fluorescent semiconductor NRs may find widespread utility in point-of-care devices and multi-target diagnostics.
1983-11-01
compound operations, with status. (h) Pre-programmed CRC and double-precision multiply/divide algo- rithms. (i) Double length accumulator with full...IH1.25 _ - MICROCOP ’ RESOLUTION TEST CHART NATIONAL BUREAU OF STANDARDS-1963-A .4 ’* • • . - . .. •. . . . . . . . . . . . . . • - -. .• ,. o. . . .- "o
Shao, Chenzhong; Tanaka, Shuji; Nakayama, Takahiro; Hata, Yoshiyuki; Bartley, Travis; Nonomura, Yutaka; Muroyama, Masanori
2017-08-28
Robot tactile sensation can enhance human-robot communication in terms of safety, reliability and accuracy. The final goal of our project is to widely cover a robot body with a large number of tactile sensors, which has significant advantages such as accurate object recognition, high sensitivity and high redundancy. In this study, we developed a multi-sensor system with dedicated Complementary Metal-Oxide-Semiconductor (CMOS) Large-Scale Integration (LSI) circuit chips (referred to as "sensor platform LSI") as a framework of a serial bus-based tactile sensor network system. The sensor platform LSI supports three types of sensors: an on-chip temperature sensor, off-chip capacitive and resistive tactile sensors, and communicates with a relay node via a bus line. The multi-sensor system was first constructed on a printed circuit board to evaluate basic functions of the sensor platform LSI, such as capacitance-to-digital and resistance-to-digital conversion. Then, two kinds of external sensors, nine sensors in total, were connected to two sensor platform LSIs, and temperature, capacitive and resistive sensing data were acquired simultaneously. Moreover, we fabricated flexible printed circuit cables to demonstrate the multi-sensor system with 15 sensor platform LSIs operating simultaneously, which showed a more realistic implementation in robots. In conclusion, the multi-sensor system with up to 15 sensor platform LSIs on a bus line supporting temperature, capacitive and resistive sensing was successfully demonstrated.
Nakazato, Kazuo
2014-03-28
By integrating chemical reactions on a large-scale integration (LSI) chip, new types of device can be created. For biomedical applications, monolithically integrated sensor arrays for potentiometric, amperometric and impedimetric sensing of biomolecules have been developed. The potentiometric sensor array detects pH and redox reaction as a statistical distribution of fluctuations in time and space. For the amperometric sensor array, a microelectrode structure for measuring multiple currents at high speed has been proposed. The impedimetric sensor array is designed to measure impedance up to 10 MHz. The multimodal sensor array will enable synthetic analysis and make it possible to standardize biosensor chips. Another approach is to create new functional devices by integrating molecular systems with LSI chips, for example image sensors that incorporate biological materials with a sensor array. The quantum yield of the photoelectric conversion of photosynthesis is 100%, which is extremely difficult to achieve by artificial means. In a recently developed process, a molecular wire is plugged directly into a biological photosynthetic system to efficiently conduct electrons to a gold electrode. A single photon can be detected at room temperature using such a system combined with a molecular single-electron transistor.
Standard Transistor Array (STAR). Volume 1: Placement technique
NASA Technical Reports Server (NTRS)
Cox, G. W.; Caroll, B. D.
1979-01-01
A large scale integration (LSI) technology, the standard transistor array uses a prefabricated understructure of transistors and a comprehensive library of digital logic cells to allow efficient fabrication of semicustom digital LSI circuits. The cell placement technique for this technology involves formation of a one dimensional cell layout and "folding" of the one dimensional placement onto the chip. It was found that, by use of various folding methods, high quality chip layouts can be achieved. Methods developed to measure of the "goodness" of the generated placements include efficient means for estimating channel usage requirements and for via counting. The placement and rating techniques were incorporated into a placement program (CAPSTAR). By means of repetitive use of the folding methods and simple placement improvement strategies, this program provides near optimum placements in a reasonable amount of time. The program was tested on several typical LSI circuits to provide performance comparisons both with respect to input parameters and with respect to the performance of other placement techniques. The results of this testing indicate that near optimum placements can be achieved by use of the procedures incurring severe time penalties.
Technical Reliability Studies. EOS/ESD Technology Abstracts
1982-01-01
RESISTANT BIPOLAR TRANSISTOR DESIGN AND ITS APPLICATIONS TO LINEAR INTEGRATED CIRCUITS 16145 MODULE ELECTROSTATIC DISCHARGE SIMULATOR 15786 SOME...T.M. 16476 STATIC DISCHARGE MODELING TECHNIQUES FOR EVALUATION OF INTEGRATED (FET) CIRCUIT DESTRUCTION 16145 MODULE ELECTAOSTATIC DISCHARGE SIMULATOR...PLASTIC LSI CIRCUITS PRklE, L.A., II 16145 MODULE ELECTROSTATIC DISCHARGE SIMULATOR PRICE, R.D. 13455 EVALUATION OF PLASTIC LSI CIRCUITS PSHAENICH, A
Shao, Chenzhong; Tanaka, Shuji; Nakayama, Takahiro; Hata, Yoshiyuki; Bartley, Travis; Muroyama, Masanori
2017-01-01
Robot tactile sensation can enhance human–robot communication in terms of safety, reliability and accuracy. The final goal of our project is to widely cover a robot body with a large number of tactile sensors, which has significant advantages such as accurate object recognition, high sensitivity and high redundancy. In this study, we developed a multi-sensor system with dedicated Complementary Metal-Oxide-Semiconductor (CMOS) Large-Scale Integration (LSI) circuit chips (referred to as “sensor platform LSI”) as a framework of a serial bus-based tactile sensor network system. The sensor platform LSI supports three types of sensors: an on-chip temperature sensor, off-chip capacitive and resistive tactile sensors, and communicates with a relay node via a bus line. The multi-sensor system was first constructed on a printed circuit board to evaluate basic functions of the sensor platform LSI, such as capacitance-to-digital and resistance-to-digital conversion. Then, two kinds of external sensors, nine sensors in total, were connected to two sensor platform LSIs, and temperature, capacitive and resistive sensing data were acquired simultaneously. Moreover, we fabricated flexible printed circuit cables to demonstrate the multi-sensor system with 15 sensor platform LSIs operating simultaneously, which showed a more realistic implementation in robots. In conclusion, the multi-sensor system with up to 15 sensor platform LSIs on a bus line supporting temperature, capacitive and resistive sensing was successfully demonstrated. PMID:29061954
Simulation Tools for Digital LSI (Large Scale Integration) Design.
1983-09-01
potential paths e:,,t from a t.,sde to t alnd (,A I isl gc’, , that It iioht he coton ilci, ilt d I:eriniiie d f ’ Ti.. ’he o diti ns for %0l’h , i p th...the flag is set during an execution of the code, another iteration is performed; otherwise, the subroutine is finished . The following is an extended
VHSIC Electronics and the Cost of Air Force Avionics in the 1990s
1990-11-01
circuit. LRM Line replaceable module. LRU Line replaceable unit. LSI Large-scale integration. LSTTL Tow-power Schottky Transitor -to-Transistor Logic...displays, communications/navigation/identification, electronic combat equipment, dispensers, and computers. These CERs, which statistically relate the...some of the reliability numbers, and adding the F-15 and F-16 to obtain the data sample shown in Table 6. Both suite costs and reliability statistics
Evaluation of advanced microelectronics for inclusion in MIL-STD-975
NASA Technical Reports Server (NTRS)
Scott, W. Richard
1991-01-01
The approach taken by NASA and JPL (Jet Propulsion Laboratory) in the development of a MIL-STD-975 section which contains advanced technology such as Large Scale Integration and Very Large Scale Integration (LSI/VLSI) microelectronic devices is described. The parts listed in this section are recommended as satisfactory for NASA flight applications, in the absence of alternate qualified devices, based on satisfactory results of a vendor capability audit, the availability of sufficient characterization and reliability data from the manufacturers and users and negotiated detail procurement specifications. The criteria used in the selection and evaluation of the vendors and candidate parts, the preparation of procurement specifications, and the status of this activity are discussed.
NASA Astrophysics Data System (ADS)
Kobayashi, Takuma; Tagawa, Ayato; Noda, Toshihiko; Sasagawa, Kiyotaka; Tokuda, Takashi; Hatanaka, Yumiko; Tamura, Hideki; Ishikawa, Yasuyuki; Shiosaka, Sadao; Ohta, Jun
2010-11-01
The combination of optical imaging with voltage-sensitive dyes is a powerful tool for studying the spatiotemporal patterns of neural activity and understanding the neural networks of the brain. To visualize the potential status of multiple neurons simultaneously using a compact instrument with high density and a wide range, we present a novel measurement system using an implantable biomedical photonic LSI device with a red absorptive light filter for voltage-sensitive dye imaging (BpLSI-red). The BpLSI-red was developed for sensing fluorescence by the on-chip LSI, which was designed by using complementary metal-oxide-semiconductor (CMOS) technology. A micro-electro-mechanical system (MEMS) microfabrication technique was used to postprocess the CMOS sensor chip; light-emitting diodes (LEDs) were integrated for illumination and to enable long-term cell culture. Using the device, we succeeded in visualizing the membrane potential of 2000-3000 cells and the process of depolarization of pheochromocytoma cells (PC12 cells) and mouse cerebral cortical neurons in a primary culture with cellular resolution. Therefore, our measurement application enables the detection of multiple neural activities simultaneously.
Regan, Caitlin; Hayakawa, Carole; Choi, Bernard
2017-12-01
Due to its simplicity and low cost, laser speckle imaging (LSI) has achieved widespread use in biomedical applications. However, interpretation of the blood-flow maps remains ambiguous, as LSI enables only limited visualization of vasculature below scattering layers such as the epidermis and skull. Here, we describe a computational model that enables flexible in-silico study of the impact of these factors on LSI measurements. The model uses Monte Carlo methods to simulate light and momentum transport in a heterogeneous tissue geometry. The virtual detectors of the model track several important characteristics of light. This model enables study of LSI aspects that may be difficult or unwieldy to address in an experimental setting, and enables detailed study of the fundamental origins of speckle contrast modulation in tissue-specific geometries. We applied the model to an in-depth exploration of the spectral dependence of speckle contrast signal in the skin, the effects of epidermal melanin content on LSI, and the depth-dependent origins of our signal. We found that LSI of transmitted light allows for a more homogeneous integration of the signal from the entire bulk of the tissue, whereas epi-illumination measurements of contrast are limited to a fraction of the light penetration depth. We quantified the spectral depth dependence of our contrast signal in the skin, and did not observe a statistically significant effect of epidermal melanin on speckle contrast. Finally, we corroborated these simulated results with experimental LSI measurements of flow beneath a thin absorbing layer. The results of this study suggest the use of LSI in the clinic to monitor perfusion in patients with different skin types, or inhomogeneous epidermal melanin distributions.
Regan, Caitlin; Hayakawa, Carole; Choi, Bernard
2017-01-01
Due to its simplicity and low cost, laser speckle imaging (LSI) has achieved widespread use in biomedical applications. However, interpretation of the blood-flow maps remains ambiguous, as LSI enables only limited visualization of vasculature below scattering layers such as the epidermis and skull. Here, we describe a computational model that enables flexible in-silico study of the impact of these factors on LSI measurements. The model uses Monte Carlo methods to simulate light and momentum transport in a heterogeneous tissue geometry. The virtual detectors of the model track several important characteristics of light. This model enables study of LSI aspects that may be difficult or unwieldy to address in an experimental setting, and enables detailed study of the fundamental origins of speckle contrast modulation in tissue-specific geometries. We applied the model to an in-depth exploration of the spectral dependence of speckle contrast signal in the skin, the effects of epidermal melanin content on LSI, and the depth-dependent origins of our signal. We found that LSI of transmitted light allows for a more homogeneous integration of the signal from the entire bulk of the tissue, whereas epi-illumination measurements of contrast are limited to a fraction of the light penetration depth. We quantified the spectral depth dependence of our contrast signal in the skin, and did not observe a statistically significant effect of epidermal melanin on speckle contrast. Finally, we corroborated these simulated results with experimental LSI measurements of flow beneath a thin absorbing layer. The results of this study suggest the use of LSI in the clinic to monitor perfusion in patients with different skin types, or inhomogeneous epidermal melanin distributions. PMID:29296499
A review of aspects relating to the improvement of holographic memory technology
NASA Astrophysics Data System (ADS)
Vyukhina, N. N.; Gibin, I. S.; Dombrovsky, V. A.; Dombrovsky, S. A.; Pankov, B. N.; Pen, E. F.; Potapov, A. N.; Sinyukov, A. M.; Tverdokhleb, P. E.; Shelkovnikov, V. V.
1996-06-01
Results of studying a holographic memory to write/read digital data pages are presented. The research has been carried out in Novosibirsk, Russia. Great attention was paid to methods of improving recording density and the reliability of data reading, the development of 'dry' photopolymers that provide recording of superimposed three-dimensional phase holograms, and the designing of parallel optic input large-scale integration (LSI) for reading and logical processing of data arriving from the holographic memory.
Leister, Iris; Mattiassich, Georg; Kindermann, Harald; Ortmaier, Reinhold; Barthofer, Jürgen; Vasvary, Imre; Katzensteiner, Klaus; Stelzhammer, Christine; Kulnik, Stefan Tino
2018-01-01
There is sparse evidence for return to sport criteria after knee injury. Functional performance deficits, particularly in fatigued muscular condition, should be verified prior to the attempt to return to high-risk pivoting sports. The purpose of this study was to generate reference values for the limb symmetry index (LSI) of healthy subjects in fatigued and non-fatigued muscular condition in a newly designed test battery. Forty-two healthy subjects [22 females, 20 males; mean (SD) age 30.4 (6.6) years] were evaluated using a test battery consisting of an isometric strength test, a series of five single-leg hop tests and an integrated fatigue protocol. Subjective physical activity was assessed with the Tegner Activity Scale (TAS). The cut-off values for healthy subjects were calculated considering the fifth percentile as the minimum reference value for the LSI and single-leg hop distance. The mean (SD) overall LSI was 98.8% (4.6). No significant gender or age specific differences in limb symmetry were observed. The comparison of the non-fatigued LSI with the overall LSI revealed no clinically relevant change due to muscular fatigue. Repeated measures ANOVA revealed a significant within effect on fatigue/non-fatigue condition ( F (1,38) = 18.000; p < 0.001, η 2 = 0.321) on absolute single-leg hop distance. Moreover, a significant between effect on the TAS-parameter ( F (1,38) = 5.928; p = 0.020, η 2 = 0.135 between: TAS ≤ 5/TAS > 5) and on gender ( F (1,38) = 23.956; p < 0.001, η 2 = 0.387) could be detected. The absolute jumping distance in the single-leg hop for distance was significantly reduced due to fatigue. No clinically relevant effect of muscular fatigue was observed on limb symmetry in our study sample. Gender and physical activity are important factors to be considered when interpreting reference values.
2014-04-30
cost to acquire systems as design maturity could be verified incrementally as the system was developed vice waiting for specific large “ big bang ...Framework (MBAF) be applied to simulate or optimize process variations on programs? LSI Roles and Responsibilities A review of the roles and...the model/process optimization process. It is the current intent that NAVAIR will use the model to run simulations on process changes in an attempt to
Design, processing and testing of LSI arrays, hybrid microelectronics task
NASA Technical Reports Server (NTRS)
Himmel, R. P.; Stuhlbarg, S. M.; Ravetti, R. G.; Zulueta, P. J.; Rothrock, C. W.
1979-01-01
Mathematical cost models previously developed for hybrid microelectronic subsystems were refined and expanded. Rework terms related to substrate fabrication, nonrecurring developmental and manufacturing operations, and prototype production are included. Sample computer programs were written to demonstrate hybrid microelectric applications of these cost models. Computer programs were generated to calculate and analyze values for the total microelectronics costs. Large scale integrated (LST) chips utilizing tape chip carrier technology were studied. The feasibility of interconnecting arrays of LSU chips utilizing tape chip carrier and semiautomatic wire bonding technology was demonstrated.
Zhukhorov, L S; Voronaia, Iu L
2002-12-01
With the help of differential blood count analysis and velocity of erythrocyte sedimentation (VES), 30 healthy persons (donors), 30 patients with chronic ischemic hearty disease (IHD) and 34 patients with acute myocardial infarction (AMI) underwent the procedure of calculation for leukocyte index (LI), leukocyte intoxication index (LII), leukocyte shift index (LSI), leukocyte and VES ratio (LVESR), leukocytic and granulocytic index (LGI), general index (GI), neurophil-lymphocyte ratio (NLR), neurophil-monocyte ratio (NMR), lymphocyte-monocyte ratio (LMR) and lymphocyte-eosinophil ratio (LER). Unlike healthy people, patients with chronic IHD had higher indices of LVESR, GI and LER while patients with AMI had increasing indices of LII, LSI, NLR, LER and decreasing indices of LI, LGI, GI, LMI. In case of AMI compared with chronic IHD, average indices of LII, LSI, NLR were higher and indices of LI, LGI, LVESR, GI, LMR were lower. The obtained results show expansion of possibilities to get information about the state of non-specific immunologic reactivity in patients with various IHD forms with the help of integral indices in blood leukogram.
INTEGRAL and XMM-Newton observations of the puzzling binary system LSI +61 303
NASA Astrophysics Data System (ADS)
Chernyakova, Masha; Neronov, A.; Walter, R.
LSI +61° 303 is one of the few X-ray binaries with Be star companion from which both radio and high-energy gamma-ray emission have been observed. We present XMM-Newton and INTE- GRAL observations which reveal variability of the X-ray spectral index of the system. The X-ray spectrum is hard (photon index Γ ≃ 1.5) during the orbital phases of both high and low X-ray flux. However, the spectrum softens at the moment of transition from high to low X-ray state. The spectrum of the system in the hard X-ray band does not reveal the presence of a cut-off (or, at least a spectral break) at 10-60 keV energies, expected if the compact object is an accreting neu- tron star. The observed spectrum and spectral variability can be explained if the compact object in the system is a rotation powered pulsar. In this case the recently found X-ray spectral variability of the system on the several kiloseconds time scale can be explained by the clumpy structure of the Be star disk.
Opportunities of CMOS-MEMS integration through LSI foundry and open facility
NASA Astrophysics Data System (ADS)
Mita, Yoshio; Lebrasseur, Eric; Okamoto, Yuki; Marty, Frédéfic; Setoguchi, Ryota; Yamada, Kentaro; Mori, Isao; Morishita, Satoshi; Imai, Yoshiaki; Hosaka, Kota; Hirakawa, Atsushi; Inoue, Shu; Kubota, Masanori; Denoual, Matthieu
2017-06-01
Since the 2000s, several countries have established micro- and nanofabrication platforms for the research and education community as national projects. By combining such platforms with VLSI multichip foundry services, various integrated devices, referred to as “CMOS-MEMS”, can be realized without constructing an entire cleanroom. In this paper, we summarize MEMS-last postprocess schemes for CMOS devices on a bulk silicon wafer as well as on a silicon-on-insulator (SOI) wafer using an open-access cleanroom of the Nanotechnology Platform of MEXT Japan. The integration devices presented in this article are free-standing structures and postprocess isolated LSI devices. Postprocess issues are identified with their solutions, such as the reactive ion etching (RIE) lag for dry release and the impact of the deep RIE (DRIE) postprocess on transistor characteristics. Integration with nonsilicon materials is proposed as one of the future directions.
[Rosenberg self-esteem scale: validation in a representative sample of Chilean adults].
Rojas-Barahona, Cristian A; Zegers, Beatriz; Förster, Carla E
2009-06-01
Self-esteem is positively associated to the well being of people and could be a good mental health indicator. To determine the reliability and validity of the Rosenberg Self-esteem Scale in a Chilean adult sample. The instrument was applied to 473 subjects living in the Metropolitan Region of Santiago, evenly distributed according to gender, age, educational level and income. The Neugarten Life Satisfaction index (LSI-A) was also applied to the sample. Cronbach's alpha for reliability of the scale was 0.754. There was no gender bias and factor analysis grouped items into two factors (5 positive and 5 negative). The instrument had a correlation of 0.455 with the LSI-A. The Rosenberg Self-esteem Scale meets the criteria for validity and reliability of a quality instrument to measure self-esteem in Chile.
Simon, Valdecir Antonio; Zanoteli, Edmar; Simon, Margarete Andreozzi Vaz Pereira; Resende, Maria Bernadete Dutra de; Reed, Umbertina Conti
2017-08-01
To validate the Life Satisfaction Index for Adolescents (LSI-A) scale, parent version and patient version, for Duchenne muscular dystrophy (DMD), spinal muscular atrophy (SMA) and limb-girdle muscular dystrophy (LGMD). The parent version of the instrument was divided into Groups A, B, C and D; and the patient version, divided into B, C and D. For the statistical calculation, the following tests were used: Cronbach's α, ICC, Pearson and the ROC Curve. The parent and patient versions of the instrument are presented, with the following results in the overall score, respectively: Cronbach's α, 0.87 and 0.89; reliability, r 0.98 and 0.97; reproducibility, ICC 0.69 and 0.80; sensitivity, 0.78 and 0.72; specificity, 0.5 and 0.69; and accuracy, 64% and 70.4%. According to the validity and reproducibility values, the LSI-A Brazil parent and patient versions, are clinically useful to assess quality of life in DMD, SMA or LGMD and may also be useful for other neuromuscular disorders.
Identification of Maize Silicon Influx Transporters
Mitani, Namiki; Yamaji, Naoki; Ma, Jian Feng
2009-01-01
Maize (Zea mays L.) shows a high accumulation of silicon (Si), but transporters involved in the uptake and distribution have not been identified. In the present study, we isolated two genes (ZmLsi1 and ZmLsi6), which are homologous to rice influx Si transporter OsLsi1. Heterologous expression in Xenopus laevis oocytes showed that both ZmLsi1 and ZmLsi6 are permeable to silicic acid. ZmLsi1 was mainly expressed in the roots. By contrast, ZmLsi6 was expressed more in the leaf sheaths and blades. Different from OsLsi1, the expression level of both ZmLsi1 and ZmLsi6 was unaffected by Si supply. Immunostaining showed that ZmLsi1 was localized on the plasma membrane of the distal side of root epidermal and hypodermal cells in the seminal and crown roots, and also in cortex cells in lateral roots. In the shoots, ZmLsi6 was found in the xylem parenchyma cells that are adjacent to the vessels in both leaf sheaths and leaf blades. ZmLsi6 in the leaf sheaths and blades also exhibited polar localization on the side facing towards the vessel. Taken together, it can be concluded that ZmLsi1 is an influx transporter of Si, which is responsible for the transport of Si from the external solution to the root cells and that ZmLsi6 mainly functions as a Si transporter for xylem unloading. PMID:18676379
NASA Astrophysics Data System (ADS)
Mori, Takahiro; Asai, Hidehiro; Fukuda, Koichi; Matsukawa, Takashi
2018-04-01
A tunnel FET (TFET) is a candidate replacement for conventional MOSFETs to realize low-power LSI. The most significant issue with the practical application of TFETs concerns their low tunneling current. Si is an indirect-gap material with a low band-to-band tunneling probability and is not favored for the channel. However, a new technology has recently been proposed to enhance the tunneling current in Si-TFETs by utilizing isoelectronic trap (IET) technology. IET technology provides an innovative approach to realizing low-power LSI with TFETs. In this paper, state-of-the-art research on Si-TFETs with IET technology from the viewpoint of process and device integration is reviewed.
Highest integration in microelectronics: Development of digital ASICs for PARS3-LR
NASA Astrophysics Data System (ADS)
Scholler, Peter; Vonlutz, Rainer
Essential electronic system components by PARS3-LR, show high requirements in calculation power, power consumption and reliability, by immediately increasing integration thicknesses. These problems are solved by using integrated circuits, developed by LSI LOGIC, that uses the technical and economic advantages of this leading edge technology.
NASA Astrophysics Data System (ADS)
Higashino, Satoru; Kobayashi, Shoei; Yamagami, Tamotsu
2007-06-01
High data transfer rate has been demanded for data storage devices along increasing the storage capacity. In order to increase the transfer rate, high-speed data processing techniques in read-channel devices are required. Generally, parallel architecture is utilized for the high-speed digital processing. We have developed a new architecture of Interpolated Timing Recovery (ITR) to achieve high-speed data transfer rate and wide capture-range in read-channel devices for the information storage channels. It facilitates the parallel implementation on large-scale-integration (LSI) devices.
NASA Technical Reports Server (NTRS)
Shiva, S. G.; Shah, A. M.
1980-01-01
The details of digital systems can be conveniently input into the design automation system by means of hardware description language (HDL). The computer aided design and test (CADAT) system at NASA MSFC is used for the LSI design. The digital design language (DDL) was selected as HDL for the CADAT System. DDL translator output can be used for the hardware implementation of the digital design. Problems of selecting the standard cells from the CADAT standard cell library to realize the logic implied by the DDL description of the system are addressed.
Laser speckle imaging of rat retinal blood flow with hybrid temporal and spatial analysis method
NASA Astrophysics Data System (ADS)
Cheng, Haiying; Yan, Yumei; Duong, Timothy Q.
2009-02-01
Noninvasive monitoring of blood flow in retinal circulation will reveal the progression and treatment of ocular disorders, such as diabetic retinopathy, age-related macular degeneration and glaucoma. A non-invasive and direct BF measurement technique with high spatial-temporal resolution is needed for retinal imaging. Laser speckle imaging (LSI) is such a method. Currently, there are two analysis methods for LSI: spatial statistics LSI (SS-LSI) and temporal statistical LSI (TS-LSI). Comparing these two analysis methods, SS-LSI has higher signal to noise ratio (SNR) and TSLSI is less susceptible to artifacts from stationary speckle. We proposed a hybrid temporal and spatial analysis method (HTS-LSI) to measure the retinal blood flow. Gas challenge experiment was performed and images were analyzed by HTS-LSI. Results showed that HTS-LSI can not only remove the stationary speckle but also increase the SNR. Under 100% O2, retinal BF decreased by 20-30%. This was consistent with the results observed with laser Doppler technique. As retinal blood flow is a critical physiological parameter and its perturbation has been implicated in the early stages of many retinal diseases, HTS-LSI will be an efficient method in early detection of retina diseases.
RETRACTED — PMD mitigation through interleaving LDPC codes with polarization scramblers
NASA Astrophysics Data System (ADS)
Han, Dahai; Chen, Haoran; Xi, Lixia
2012-11-01
The combination of forward error correction (FEC) and distributed fast polarization scramblers (D-FPSs) is approved as an effective method to mitigate polarization mode dispersion (PMD) in high-speed optical fiber communication system. The low-density parity-check (LDPC) codes are newly introduced into the PMD mitigation scheme with D-FPSs in this paper as one of the promising FEC codes to achieve better performance. The scrambling speed of FPS for LDPC (2040, 1903) codes system is discussed, and the reasonable speed 10 MHz is obtained from the simulation results. For easy application in practical large scale integrated (LSI) circuit, the number of iterations in decoding LDPC codes is also investigated. The PMD tolerance and cut-off optical signal-to-noise ratio (OSNR) of LDPC codes are compared with Reed-Solomon (RS) codes in different conditions. In the simulation, the interleaving LDPC codes brings incremental performance of error correction, and the PMD tolerance is 10 ps at OSNR=11.4 dB. The results show that the meaning of the work is that LDPC codes are a substitute for traditional RS codes with D-FPSs and all of the executable code files are open for researchers who have practical LSI platform for PMD mitigation.
PMD mitigation through interleaving LDPC codes with polarization scramblers
NASA Astrophysics Data System (ADS)
Han, Dahai; Chen, Haoran; Xi, Lixia
2013-09-01
The combination of forward error correction (FEC) and distributed fast polarization scramblers (D-FPSs) is approved an effective method to mitigate polarization mode dispersion (PMD) in high-speed optical fiber communication system. The low-density parity-check (LDPC) codes are newly introduced into the PMD mitigation scheme with D-FPSs in this article as one of the promising FEC codes to achieve better performance. The scrambling speed of FPS for LDPC (2040, 1903) codes system is discussed, and the reasonable speed 10MHz is obtained from the simulation results. For easy application in practical large scale integrated (LSI) circuit, the number of iterations in decoding LDPC codes is also investigated. The PMD tolerance and cut-off optical signal-to-noise ratio (OSNR) of LDPC codes are compared with Reed-Solomon (RS) codes in different conditions. In the simulation, the interleaving LDPC codes bring incremental performance of error correction, and the PMD tolerance is 10ps at OSNR=11.4dB. The results show the meaning of the work is that LDPC codes are a substitute for traditional RS codes with D-FPSs and all of the executable code files are open for researchers who have practical LSI platform for PMD mitigation.
Isolation and functional characterization of CsLsi1, a silicon transporter gene in Cucumis sativus.
Sun, Hao; Guo, Jia; Duan, Yaoke; Zhang, Tiantian; Huo, Heqiang; Gong, Haijun
2017-02-01
Cucumber (Cucumis sativus) is a widely grown cucurbitaceous vegetable that exhibits a relatively high capacity for silicon (Si) accumulation, but the molecular mechanism for silicon uptake remains to be clarified. Here we isolated and characterized CsLsi1, a gene encoding a silicon transporter in cucumber (cv. Mch-4). CsLsi1 shares 55.70 and 90.63% homology with the Lsi1s of a monocot and dicot, rice (Oryza sativa) and pumpkin (Cucurbita moschata), respectively. CsLsi1 was predominantly expressed in the roots, and application of exogenous silicon suppressed its expression. Transient expression in cucumber protoplasts showed that CsLsi1 was localized in the plasma membrane. Heterologous expression in Xenopus laevis oocytes showed that CsLsi1 evidenced influx transport activity for silicon but not urea or glycerol. Expression of cucumber CsLsi1-mGFP under its own promoter showed that CsLsi1 was localized at the distal side of the endodermis and the cortical cells in the root tips as well as in the root hairs near the root tips. Heterologous expression of CsLsi1 in a rice mutant defective in silicon uptake and the over-expression of this gene in cucumber further confirmed the role of CsLsi1 in silicon uptake. Our results suggest that CsLsi1 is a silicon influx transporter in cucumber. The cellular localization of CsLsi1 in cucumber roots is different from that in other plants, implying the possible effect of transporter localization on silicon uptake capability. © 2016 Scandinavian Plant Physiology Society.
Laser speckle imaging based on photothermally driven convection.
Regan, Caitlin; Choi, Bernard
2016-02-01
Laser speckle imaging (LSI) is an interferometric technique that provides information about the relative speed of moving scatterers in a sample. Photothermal LSI overcomes limitations in depth resolution faced by conventional LSI by incorporating an excitation pulse to target absorption by hemoglobin within the vascular network. Here we present results from experiments designed to determine the mechanism by which photothermal LSI decreases speckle contrast. We measured the impact of mechanical properties on speckle contrast, as well as the spatiotemporal temperature dynamics and bulk convective motion occurring during photothermal LSI. Our collective data strongly support the hypothesis that photothermal LSI achieves a transient reduction in speckle contrast due to bulk motion associated with thermally driven convection. The ability of photothermal LSI to image structures below a scattering medium may have important preclinical and clinical applications.
Laser speckle imaging based on photothermally driven convection
Regan, Caitlin; Choi, Bernard
2016-01-01
Abstract. Laser speckle imaging (LSI) is an interferometric technique that provides information about the relative speed of moving scatterers in a sample. Photothermal LSI overcomes limitations in depth resolution faced by conventional LSI by incorporating an excitation pulse to target absorption by hemoglobin within the vascular network. Here we present results from experiments designed to determine the mechanism by which photothermal LSI decreases speckle contrast. We measured the impact of mechanical properties on speckle contrast, as well as the spatiotemporal temperature dynamics and bulk convective motion occurring during photothermal LSI. Our collective data strongly support the hypothesis that photothermal LSI achieves a transient reduction in speckle contrast due to bulk motion associated with thermally driven convection. The ability of photothermal LSI to image structures below a scattering medium may have important preclinical and clinical applications. PMID:26927221
Discovery of extra-terrestrial life: assessment by scales of its importance and associated risks.
Almár, Iván; Race, Margaret S
2011-02-13
The Rio Scale accepted by the SETI Committee of the International Academy of Astronautics in 2002 is intended for use in evaluating the impact on society of any announcement regarding the discovery of evidence of extra-terrestrial (ET) intelligence. The Rio Scale is mathematically defined using three parameters (class of phenomenon, type of discovery and distance) and a δ factor, the assumed credibility of a claim. This paper proposes a new scale applicable to announcements alleging evidence of ET life within or outside our Solar System. The London Scale for astrobiology has mathematical structure and logic similar to the Rio Scale, and uses four parameters (life form, nature of phenomenon, type of discovery and distance) as well as a credibility factor δ to calculate a London Scale index (LSI) with values ranging from 0 to 10. The level of risk or biohazard associated with a purported discovery is evaluated independently of the LSI value and may be ranked in four categories. The combined information is intended to provide a scalar assessment of the scientific importance, validity and potential risks associated with putative evidence of ET life discovered on Earth, on nearby bodies in the Solar System or in our Galaxy.
Design automation techniques for custom LSI arrays
NASA Technical Reports Server (NTRS)
Feller, A.
1975-01-01
The standard cell design automation technique is described as an approach for generating random logic PMOS, CMOS or CMOS/SOS custom large scale integration arrays with low initial nonrecurring costs and quick turnaround time or design cycle. The system is composed of predesigned circuit functions or cells and computer programs capable of automatic placement and interconnection of the cells in accordance with an input data net list. The program generates a set of instructions to drive an automatic precision artwork generator. A series of support design automation and simulation programs are described, including programs for verifying correctness of the logic on the arrays, performing dc and dynamic analysis of MOS devices, and generating test sequences.
Sample entropy predicts lifesaving interventions in trauma patients with normal vital signs.
Naraghi, L; Mejaddam, A Y; Birkhan, O A; Chang, Y; Cropano, C M; Mesar, T; Larentzakis, A; Peev, M; Sideris, A C; Van der Wilden, G M; Imam, A M; Hwabejire, J O; Velmahos, G C; Fagenholz, P J; Yeh, D; de Moya, M A; King, D R
2015-08-01
Heart rate complexity, commonly described as a "new vital sign," has shown promise in predicting injury severity, but its use in clinical practice is not yet widely adopted. We previously demonstrated the ability of this noninvasive technology to predict lifesaving interventions (LSIs) in trauma patients. This study was conducted to prospectively evaluate the utility of real-time, automated, noninvasive, instantaneous sample entropy (SampEn) analysis to predict the need for an LSI in a trauma alert population presenting with normal vital signs. Prospective enrollment of patients who met criteria for trauma team activation and presented with normal vital signs was conducted at a level I trauma center. High-fidelity electrocardiogram recording was used to calculate SampEn and SD of the normal-to-normal R-R interval (SDNN) continuously in real time for 2 hours with a portable, handheld device. Patients who received an LSI were compared to patients without any intervention (non-LSI). Multivariable analysis was performed to control for differences between the groups. Treating clinicians were blinded to results. Of 129 patients enrolled, 38 (29%) received 136 LSIs within 24 hours of hospital arrival. Initial systolic blood pressure was similar in both groups. Lifesaving intervention patients had a lower Glasgow Coma Scale. The mean SampEn on presentation was 0.7 (0.4-1.2) in the LSI group compared to 1.5 (1.1-2.0) in the non-LSI group (P < .0001). The area under the curve with initial SampEn alone was 0.73 (95% confidence interval [CI], 0.64-0.81) and increased to 0.93 (95% CI, 0.89-0.98) after adding sedation to the model. Sample entropy of less than 0.8 yields sensitivity, specificity, negative predictive value, and positive predictive value of 58%, 86%, 82%, and 65%, respectively, with an overall accuracy of 76% for predicting an LSI. SD of the normal-to-normal R-R interval had no predictive value. In trauma patients with normal presenting vital signs, decreased SampEn is an independent predictor of the need for LSI. Real-time SampEn analysis may be a useful adjunct to standard vital signs monitoring. Adoption of real-time, instantaneous SampEn monitoring for trauma patients, especially in resource-constrained environments, should be considered. Copyright © 2015 Elsevier Inc. All rights reserved.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Sadoh, Taizoh, E-mail: sadoh@ed.kyushu-u.ac.jp; Chikita, Hironori; Miyao, Masanobu
2015-09-07
Ultra-low temperature (≤300 °C) growth of Ge-rich SiGe on Si substrates is strongly desired to realize advanced electronic and optical devices, which can be merged onto Si large-scale integrated circuits (LSI). To achieve this, annealing characteristics of a-GeSn/c-Si structures are investigated under wide ranges of the initial Sn concentrations (0%–26%) and annealing conditions (300–1000 °C, 1 s–48 h). Epitaxial growth triggered by SiGe mixing is observed after annealing, where the annealing temperatures necessary for epitaxial growth significantly decrease with increasing initial Sn concentration and/or annealing time. As a result, Ge-rich (∼80%) SiGe layers with Sn concentrations of ∼2% are realized by ultra-low temperature annealingmore » (300 °C, 48 h) for a sample with the initial Sn concentration of 26%. The annealing temperature (300 °C) is in the solid-liquid coexisting temperature region of the phase diagram for Ge-Sn system. From detailed analysis of crystallization characteristics and composition profiles in grown layers, it is suggested that SiGe mixing is generated by a liquid-phase reaction even at ultra-low temperatures far below the melting temperature of a-GeSn. This ultra-low-temperature growth technique of Ge-rich SiGe on Si substrates is expected to be useful to realize next-generation LSI, where various multi-functional devices are integrated on Si substrates.« less
Physiological and molecular characterization of Si uptake in wild rice species.
Mitani-Ueno, Namiki; Ogai, Hisao; Yamaji, Naoki; Ma, Jian Feng
2014-07-01
Cultivated rice (Oryza sativa) accumulates high concentration of silicon (Si), which is required for its high and sustainable production. High Si accumulation in cultivated rice is achieved by a high expression of both influx (Lsi1) and efflux (Lsi2) Si transporters in roots. Herein, we physiologically investigated Si uptake, isolated and functionally characterized Si transporters in six wild rice species with different genome types. Si uptake by the roots was lower in Oryza rufipogon, Oryza barthii (AA genome), Oryza australiensis (EE genome) and Oryza punctata (BB genome), but similar in Oryza glumaepatula and Oryza meridionalis (AA genome) compared with the cultivated rice (cv. Nipponbare). However, all wild rice species and the cultivated rice showed similar concentration of Si in the shoots when grown in a field. All species with AA genome showed the same amino acid sequence of both Lsi1 and Lsi2 as O. sativa, whereas species with EE and BB genome showed several nucleotide differences in both Lsi1 and Lsi2. However, proteins encoded by these genes also showed transport activity for Si in Xenopus oocyte. The mRNA expression of Lsi1 in all wild rice species was lower than that in the cultivated rice, whereas the expression of Lsi2 was lower in O. rufipogon and O. barthii but similar in other species. Similar cellular localization of Lsi1 and Lsi2 was observed in all wild rice as the cultivated rice. These results indicate that superior Si uptake, the important trait for rice growth, is basically conserved in wild and cultivated rice species. © 2013 Scandinavian Plant Physiology Society.
Real-time blood flow visualization using the graphics processing unit
NASA Astrophysics Data System (ADS)
Yang, Owen; Cuccia, David; Choi, Bernard
2011-01-01
Laser speckle imaging (LSI) is a technique in which coherent light incident on a surface produces a reflected speckle pattern that is related to the underlying movement of optical scatterers, such as red blood cells, indicating blood flow. Image-processing algorithms can be applied to produce speckle flow index (SFI) maps of relative blood flow. We present a novel algorithm that employs the NVIDIA Compute Unified Device Architecture (CUDA) platform to perform laser speckle image processing on the graphics processing unit. Software written in C was integrated with CUDA and integrated into a LabVIEW Virtual Instrument (VI) that is interfaced with a monochrome CCD camera able to acquire high-resolution raw speckle images at nearly 10 fps. With the CUDA code integrated into the LabVIEW VI, the processing and display of SFI images were performed also at ~10 fps. We present three video examples depicting real-time flow imaging during a reactive hyperemia maneuver, with fluid flow through an in vitro phantom, and a demonstration of real-time LSI during laser surgery of a port wine stain birthmark.
Real-time blood flow visualization using the graphics processing unit
Yang, Owen; Cuccia, David; Choi, Bernard
2011-01-01
Laser speckle imaging (LSI) is a technique in which coherent light incident on a surface produces a reflected speckle pattern that is related to the underlying movement of optical scatterers, such as red blood cells, indicating blood flow. Image-processing algorithms can be applied to produce speckle flow index (SFI) maps of relative blood flow. We present a novel algorithm that employs the NVIDIA Compute Unified Device Architecture (CUDA) platform to perform laser speckle image processing on the graphics processing unit. Software written in C was integrated with CUDA and integrated into a LabVIEW Virtual Instrument (VI) that is interfaced with a monochrome CCD camera able to acquire high-resolution raw speckle images at nearly 10 fps. With the CUDA code integrated into the LabVIEW VI, the processing and display of SFI images were performed also at ∼10 fps. We present three video examples depicting real-time flow imaging during a reactive hyperemia maneuver, with fluid flow through an in vitro phantom, and a demonstration of real-time LSI during laser surgery of a port wine stain birthmark. PMID:21280915
NASA Astrophysics Data System (ADS)
Popov, V. D.; Khamidullina, N. M.
2006-10-01
In developing radio-electronic devices (RED) of spacecraft operating in the fields of ionizing radiation in space, one of the most important problems is the correct estimation of their radiation tolerance. The “weakest link” in the element base of onboard microelectronic devices under radiation effect is the integrated microcircuits (IMC), especially of large scale (LSI) and very large scale (VLSI) degree of integration. The main characteristic of IMC, which is taken into account when making decisions on using some particular type of IMC in the onboard RED, is the probability of non-failure operation (NFO) at the end of the spacecraft’s lifetime. It should be noted that, until now, the NFO has been calculated only from the reliability characteristics, disregarding the radiation effect. This paper presents the so-called “reliability” approach to determination of radiation tolerance of IMC, which allows one to estimate the probability of non-failure operation of various types of IMC with due account of radiation-stimulated dose failures. The described technique is applied to RED onboard the Spektr-R spacecraft to be launched in 2007.
Vatansever, Recep; Ozyigit, Ibrahim Ilker; Filiz, Ertugrul; Gozukirmizi, Nermin
2017-04-01
Silicon (Si) is a nonessential, beneficial micronutrient for plants. It increases the plant stress tolerance in relation to its accumulation capacity. In this work, root Si transporter genes were characterized in 17 different plants and inferred for their Si-accumulation status. A total of 62 Si transporter genes (31 Lsi1 and 31 Lsi2) were identified in studied plants. Lsi1s were 261-324 residues protein with a MIP family domain whereas Lsi2s were 472-547 residues with a citrate transporter family domain. Lsi1s possessed characteristic sequence features that can be employed as benchmark in prediction of Si-accumulation status/capacity of the plants. Silicic acid selectivity in Lsi1s was associated with two highly conserved NPA (Asn-Pro-Ala) motifs and a Gly-Ser-Gly-Arg (GSGR) ar/R filter. Two NPA regions were present in all Lsi1 members but some Ala substituted with Ser or Val. GSGR filter was only available in the proposed high and moderate Si accumulators. In phylogeny, Lsi1s formed three clusters as low, moderate and high Si accumulators based on tree topology and availability of GSGR filter. Low-accumulators contained filters WIGR, AIGR, FAAR, WVAR and AVAR, high-accumulators only with GSGR filter, and moderate-accumulators mostly with GSGR but some with A/CSGR filters. A positive correlation was also available between sequence homology and Si-accumulation status of the tested plants. Thus, availability of GSGR selectivity filter and sequence homology degree could be used as signatures in prediction of Si-accumulation status in experimentally uncharacterized plants. Moreover, interaction partner and expression profile analyses implicated the involvement of Si transporters in plant stress tolerance.
Correcting for motion artifact in handheld laser speckle images
NASA Astrophysics Data System (ADS)
Lertsakdadet, Ben; Yang, Bruce Y.; Dunn, Cody E.; Ponticorvo, Adrien; Crouzet, Christian; Bernal, Nicole; Durkin, Anthony J.; Choi, Bernard
2018-03-01
Laser speckle imaging (LSI) is a wide-field optical technique that enables superficial blood flow quantification. LSI is normally performed in a mounted configuration to decrease the likelihood of motion artifact. However, mounted LSI systems are cumbersome and difficult to transport quickly in a clinical setting for which portability is essential in providing bedside patient care. To address this issue, we created a handheld LSI device using scientific grade components. To account for motion artifact of the LSI device used in a handheld setup, we incorporated a fiducial marker (FM) into our imaging protocol and determined the difference between highest and lowest speckle contrast values for the FM within each data set (Kbest and Kworst). The difference between Kbest and Kworst in mounted and handheld setups was 8% and 52%, respectively, thereby reinforcing the need for motion artifact quantification. When using a threshold FM speckle contrast value (KFM) to identify a subset of images with an acceptable level of motion artifact, mounted and handheld LSI measurements of speckle contrast of a flow region (KFLOW) in in vitro flow phantom experiments differed by 8%. Without the use of the FM, mounted and handheld KFLOW values differed by 20%. To further validate our handheld LSI device, we compared mounted and handheld data from an in vivo porcine burn model of superficial and full thickness burns. The speckle contrast within the burn region (KBURN) of the mounted and handheld LSI data differed by <4 % when accounting for motion artifact using the FM, which is less than the speckle contrast difference between superficial and full thickness burns. Collectively, our results suggest the potential of handheld LSI with an FM as a suitable alternative to mounted LSI, especially in challenging clinical settings with space limitations such as the intensive care unit.
Full-field, nonscanning, optical imaging for perfusion indication
NASA Astrophysics Data System (ADS)
Chou, Nee-Yin; Winchester, L. W., Jr.; Naramore, W. J.; Alley, M. S.; Lesnick, A. J.
2010-04-01
Laser speckle imaging (LSI) has been gaining popularity for the past few years. Like other optical imaging modalities such as optical coherence tomography (OCT), orthogonal polarization spectroscopy (OPS), and laser Doppler imaging (LDI), LSI utilizes nonionizing radiation. In LSI, blood flow velocity is obtained by analyzing, temporally or spatially, laser speckle (LS) patterns generated when an expanded laser beam illuminates the tissue. The advantages of LSI are that it is fast, does not require scanning, and provides full-field LS images to extract realtime, quantitative hemodynamic information of subtle changes in the tissue vasculature. For medical applications, LSI has been used for obtaining blood velocities in human retina, skin flaps, wounds, and cerebral and sublingual areas. When coupled with optical fibers, LSI can be used for endoscopic measurements for a variety of applications. This paper describes the application of LSI in retinal, sublingual, and skin flap measurements. Evaluation of retinal hemodynamics provides very important diagnostic information, since the human retina offers direct optical access to both the central nervous system (CNS) and afferent and efferent CNS vasculature. The performance of an LSI-based fundus imager for measuring retinal hemodynamics is presented. Sublingual microcirculation may have utility for sepsis indication, since inherent in organ injury caused by sepsis is a profound change in microvascular hemodynamics. Sublingual measurement results using an LSI scope are reported. A wound imager for imaging LS patterns of wounds and skin flaps is described, and results are presented.
Efficient Matrix Models for Relational Learning
2009-10-01
74 4.5.3 Comparison to pLSI- pHITS . . . . . . . . . . . . . . . . . . . . 76 5 Hierarchical Bayesian Collective...Behaviour of Newton vs. Stochastic Newton on a three-factor model. 4.5.3 Comparison to pLSI- pHITS Caveat: Collective Matrix Factorization makes no guarantees...leads to better results; and another where a co-clustering model, pLSI- pHITS , has the advantage. pLSI- pHITS [24] is a relational clustering technique
Ultra high speed image processing techniques. [electronic packaging techniques
NASA Technical Reports Server (NTRS)
Anthony, T.; Hoeschele, D. F.; Connery, R.; Ehland, J.; Billings, J.
1981-01-01
Packaging techniques for ultra high speed image processing were developed. These techniques involve the development of a signal feedthrough technique through LSI/VLSI sapphire substrates. This allows the stacking of LSI/VLSI circuit substrates in a 3 dimensional package with greatly reduced length of interconnecting lines between the LSI/VLSI circuits. The reduced parasitic capacitances results in higher LSI/VLSI computational speeds at significantly reduced power consumption levels.
Design, processing and testing of LSI arrays hybrid microelectronics task
NASA Technical Reports Server (NTRS)
Himmel, R. P.; Stuhlbarg, S. M.; Salmassy, S.
1978-01-01
Those factors affecting the cost of electronic subsystems utilizing LSI microcircuits were determined and the most efficient methods for low cost packaging of LSI devices as a function of density and reliability were developed.
NASA Astrophysics Data System (ADS)
He, Yongli; Huang, Jianping; Li, Dongdong; Xie, Yongkun; Zhang, Guolong; Qi, Yulei; Wang, Shanshan; Totz, Sonja
2017-11-01
The influence of winter and summer land-sea surface thermal contrast on blocking for 1948-2013 is investigated using observations and the coupled model intercomparison project outputs. The land-sea index (LSI) is defined to measure the changes of zonal asymmetric thermal forcing under global warming. The summer LSI shows a slower increasing trend than winter during this period. For the positive of summer LSI, the EP flux convergence induced by the land-sea thermal forcing in the high latitude becomes weaker than normal, which induces positive anomaly of zonal-mean westerly and double-jet structure. Based on the quasiresonance amplification mechanism, the narrow and reduced westerly tunnel between two jet centers provides a favor environment for more frequent blocking. Composite analysis demonstrates that summer blocking shows an increasing trend of event numbers and a decreasing trend of durations. The numbers of the short-lived blocking persisting for 5-9 days significantly increases and the numbers of the long-lived blocking persisting for longer than 10 days has a weak increase than that in negative phase of summer LSI. The increasing transient wave activities induced by summer LSI is responsible for the decreasing duration of blockings. The increasing blocking due to summer LSI can further strengthen the continent warming and increase the summer LSI, which forms a positive feedback. The opposite dynamical effect of LSI on summer and winter blocking are discussed and found that the LSI-blocking negative feedback partially reduces the influence of the above positive feedback and induce the weak summer warming rate.
Walters, Glenn D
2011-06-01
Recidivism was evaluated in 178 male inmates administered the Psychological Inventory of Criminal Thinking Styles (PICTS) and scored on the Level of Service Inventory-Revised: Screening Version (LSI-R:SV) 1-55 months before their release from prison. Age, prior charges, the LSI-R:SV total score, and the PICTS General Criminal Thinking (GCT), Proactive Criminal Thinking (P), and Reactive Criminal Thinking (R) scores served as predictors of recidivism in follow-ups spanning 1-53 months. Age, prior charges, and the PICTS GCT and R scales consistently and incrementally predicted general recidivism (all charges), whereas prior charges and the PICTS R scale consistently and incrementally predicted serious recidivism (more serious charges). Although these results support the predictive efficacy and incremental validity of content-relevant self-report measures of criminality like the PICTS, they also indicate that the effect is modest and in need of further clarification. One area requiring further investigation is the potential role of the PICTS, particularly the R scale, as a dynamic risk factor.
Effect of rebamipide ophthalmic suspension on the success of lacrimal stent intubation.
Mimura, Masashi; Ueki, Mari; Oku, Hidehiro; Sato, Bunpei; Ikeda, Tsunehiko
2016-02-01
To evaluate the effect of the postoperative administration of rebamipide ophthalmic suspension on the success rate of lacrimal stent intubation (LSI) for the treatment of primary acquired nasolacrimal duct obstruction (PANDO). This comparative interventional cohort study investigated 110 consecutive patients with PANDO who were treated with LSI and followed up for 12 months postoperatively at one institution. LSI was performed by one surgeon, and all patients received identical postoperative care. Among the total 110 patients, 71 underwent LSI with postoperative administration of rebamipide ophthalmic suspension, and 39 underwent LSI without administration of the suspension. Data related to patient age, gender, laterality, and postoperative administration of rebamipide ophthalmic suspension were collected and used as independent variables, and logistic regression analyses were performed to compare the anatomical success rate at 12 months postoperatively between patients with and without postoperative administration of the suspension. The anatomical success rate of LSI in patients with and without postoperative administration of rebamipide ophthalmic suspension was 90.1 and 69.2 %, respectively. A comparison of these success rates showed statistical significance, in that the rate of treatment success was higher in PANDO patients who underwent LSI with postoperative administration of the suspension [odds ratio (OR), 3.37; P < 0.05]. The findings of this study show that postoperative administration of rebamipide ophthalmic suspension increases the rate of anatomical success in patients who undergo LSI for the treatment of PANDO.
Correcting for motion artifact in handheld laser speckle images.
Lertsakdadet, Ben; Yang, Bruce Y; Dunn, Cody E; Ponticorvo, Adrien; Crouzet, Christian; Bernal, Nicole; Durkin, Anthony J; Choi, Bernard
2018-03-01
Laser speckle imaging (LSI) is a wide-field optical technique that enables superficial blood flow quantification. LSI is normally performed in a mounted configuration to decrease the likelihood of motion artifact. However, mounted LSI systems are cumbersome and difficult to transport quickly in a clinical setting for which portability is essential in providing bedside patient care. To address this issue, we created a handheld LSI device using scientific grade components. To account for motion artifact of the LSI device used in a handheld setup, we incorporated a fiducial marker (FM) into our imaging protocol and determined the difference between highest and lowest speckle contrast values for the FM within each data set (Kbest and Kworst). The difference between Kbest and Kworst in mounted and handheld setups was 8% and 52%, respectively, thereby reinforcing the need for motion artifact quantification. When using a threshold FM speckle contrast value (KFM) to identify a subset of images with an acceptable level of motion artifact, mounted and handheld LSI measurements of speckle contrast of a flow region (KFLOW) in in vitro flow phantom experiments differed by 8%. Without the use of the FM, mounted and handheld KFLOW values differed by 20%. To further validate our handheld LSI device, we compared mounted and handheld data from an in vivo porcine burn model of superficial and full thickness burns. The speckle contrast within the burn region (KBURN) of the mounted and handheld LSI data differed by <4 % when accounting for motion artifact using the FM, which is less than the speckle contrast difference between superficial and full thickness burns. Collectively, our results suggest the potential of handheld LSI with an FM as a suitable alternative to mounted LSI, especially in challenging clinical settings with space limitations such as the intensive care unit. (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE).
Brazeau, Daniel A; Lesser, Michael P; Slattery, Marc
2013-01-01
Mesophotic coral reefs (30-150 m) have recently received increased attention as a potential source of larvae (e.g., the refugia hypothesis) to repopulate a select subset of the shallow water (<30 m) coral fauna. To test the refugia hypothesis we used highly polymorphic Amplified Fragment Length Polymorphism (AFLP) markers as a means to assess small-scale genetic heterogeneity between geographic locations and across depth clines in the Caribbean coral, Montastraea cavernosa. Zooxanthellae-free DNA extracts of coral samples (N = 105) were analyzed from four depths, shallow (3-10 m), medium (15-25 m), deep (30-50 m) and very deep (60-90 m) from Little Cayman Island (LCI), Lee Stocking Island (LSI), Bahamas and San Salvador (SS), Bahamas which range in distance from 170 to 1,600 km apart. Using AMOVA analysis there were significant differences in ΦST values in pair wise comparisons between LCI and LSI. Among depths at LCI, there was significant genetic differentiation between shallow and medium versus deep and very deep depths in contrast there were no significant differences in ΦST values among depths at LSI. The assignment program AFLPOP, however, correctly assigned 95.7% of the LCI and LSI samples to the depths from which they were collected, differentiating among populations as little as 10 to 20 m in depth from one another. Discriminant function analysis of the data showed significant differentiation among samples when categorized by collection site as well as collection depth. FST outlier analyses identified 2 loci under positive selection and 3 under balancing selection at LCI. At LSI 2 loci were identified, both showing balancing selection. This data shows that adult populations of M. cavernosa separated by depths of tens of meters exhibits significant genetic structure, indicative of low population connectivity among and within sites and are not supplying successful recruits to adjacent coral reefs less than 30 m in depth.
Handheld, point-of-care laser speckle imaging
Farraro, Ryan; Fathi, Omid; Choi, Bernard
2016-01-01
Abstract. Laser speckle imaging (LSI) enables measurement of relative changes in blood flow in biological tissues. We postulate that a point-of-care form factor will lower barriers to routine clinical use of LSI. Here, we describe a first-generation handheld LSI device based on a tablet computer. The coefficient of variation of speckle contrast was <2% after averaging imaging data collected over an acquisition period of 5.3 s. With a single, experienced user, handheld motion artifacts had a negligible effect on data collection. With operation by multiple users, we did not identify any significant difference (p>0.05) between the measured speckle contrast values using either a handheld or mounted configuration. In vivo data collected during occlusion experiments demonstrate that a handheld LSI is capable of both quantitative and qualitative assessment of changes in blood flow. Finally, as a practical application of handheld LSI, we collected data from a 53-day-old neonate with confirmed compromised blood flow in the hand. We readily identified with LSI a region of diminished blood flow in the thumb of the affected hand. Our data collectively suggest that handheld LSI is a promising technique to enable clinicians to obtain point-of-care measurements of blood flow. PMID:27579578
Design and evaluation of a miniature laser speckle imaging device to assess gingival health
Regan, Caitlin; White, Sean M.; Yang, Bruce Y.; Takesh, Thair; Ho, Jessica; Wink, Cherie; Wilder-Smith, Petra; Choi, Bernard
2016-01-01
Abstract. Current methods used to assess gingivitis are qualitative and subjective. We hypothesized that gingival perfusion measurements could provide a quantitative metric of disease severity. We constructed a compact laser speckle imaging (LSI) system that could be mounted in custom-made oral molds. Rigid fixation of the LSI system in the oral cavity enabled measurement of blood flow in the gingiva. In vitro validation performed in controlled flow phantoms demonstrated that the compact LSI system had comparable accuracy and linearity compared to a conventional bench-top LSI setup. In vivo validation demonstrated that the compact LSI system was capable of measuring expected blood flow dynamics during a standard postocclusive reactive hyperemia and that the compact LSI system could be used to measure gingival blood flow repeatedly without significant variation in measured blood flow values (p<0.05). Finally, compact LSI system measurements were collected from the interdental papilla of nine subjects and compared to a clinical assessment of gingival bleeding on probing. A statistically significant correlation (ρ=0.53; p<0.005) was found between these variables, indicating that quantitative gingival perfusion measurements performed using our system may aid in the diagnosis and prognosis of periodontal disease. PMID:27787545
Design and evaluation of a miniature laser speckle imaging device to assess gingival health
NASA Astrophysics Data System (ADS)
Regan, Caitlin; White, Sean M.; Yang, Bruce Y.; Takesh, Thair; Ho, Jessica; Wink, Cherie; Wilder-Smith, Petra; Choi, Bernard
2016-10-01
Current methods used to assess gingivitis are qualitative and subjective. We hypothesized that gingival perfusion measurements could provide a quantitative metric of disease severity. We constructed a compact laser speckle imaging (LSI) system that could be mounted in custom-made oral molds. Rigid fixation of the LSI system in the oral cavity enabled measurement of blood flow in the gingiva. In vitro validation performed in controlled flow phantoms demonstrated that the compact LSI system had comparable accuracy and linearity compared to a conventional bench-top LSI setup. In vivo validation demonstrated that the compact LSI system was capable of measuring expected blood flow dynamics during a standard postocclusive reactive hyperemia and that the compact LSI system could be used to measure gingival blood flow repeatedly without significant variation in measured blood flow values (p<0.05). Finally, compact LSI system measurements were collected from the interdental papilla of nine subjects and compared to a clinical assessment of gingival bleeding on probing. A statistically significant correlation (ρ=0.53 p<0.005) was found between these variables, indicating that quantitative gingival perfusion measurements performed using our system may aid in the diagnosis and prognosis of periodontal disease.
Handheld, point-of-care laser speckle imaging
NASA Astrophysics Data System (ADS)
Farraro, Ryan; Fathi, Omid; Choi, Bernard
2016-09-01
Laser speckle imaging (LSI) enables measurement of relative changes in blood flow in biological tissues. We postulate that a point-of-care form factor will lower barriers to routine clinical use of LSI. Here, we describe a first-generation handheld LSI device based on a tablet computer. The coefficient of variation of speckle contrast was <2% after averaging imaging data collected over an acquisition period of 5.3 s. With a single, experienced user, handheld motion artifacts had a negligible effect on data collection. With operation by multiple users, we did not identify any significant difference (p>0.05) between the measured speckle contrast values using either a handheld or mounted configuration. In vivo data collected during occlusion experiments demonstrate that a handheld LSI is capable of both quantitative and qualitative assessment of changes in blood flow. Finally, as a practical application of handheld LSI, we collected data from a 53-day-old neonate with confirmed compromised blood flow in the hand. We readily identified with LSI a region of diminished blood flow in the thumb of the affected hand. Our data collectively suggest that handheld LSI is a promising technique to enable clinicians to obtain point-of-care measurements of blood flow.
Relational Learning via Collective Matrix Factorization
2008-06-01
well-known example of such a schema is pLSI- pHITS [13], which models document-word counts and document-document citations: E1 = words and E2 = E3...relational co- clustering include pLSI, pLSI- pHITS , the symmetric block models of Long et. al. [23, 24, 25], and Bregman tensor clustering [5] (which can...to pLSI- pHITS In this section we provide an example where the additional flexibility of collective matrix factorization leads to better results; and
Life satisfaction, loneliness and related factors during female midlife.
Fernández-Alonso, Ana M; Trabalón-Pastor, Martina; Vara, Carmen; Chedraui, Peter; Pérez-López, Faustino R
2012-05-01
Studies assessing life satisfaction and feelings of loneliness in mid-aged women are scarce. To assess loneliness, life satisfaction and related factors in mid-aged Spanish women. This was a cross sectional study in which 182 women aged 40 to 65 completed the menopause rating scale (MRS), the University of California at Los Angeles loneliness scale (UCLA-LS), the life satisfaction index A (LSI-A), and a general socio-demographic questionnaire containing personal/partner data. Internal consistency of each tool was also computed. Median [interquartile range] age of the sample was 51 [9.0] years. A 55.5% were postmenopausal, 47.3% had increased body mass index (BMI) values, 57.7% were abdominally obese, 1.6% had hypertension and 86.3% had a stable partner. In addition, 4.9% used hormone therapy and 19.2% psychotropic drugs. Multiple linear regression analysis found that higher UCLA-LS scores (more loneliness) correlated with MRS psychological scores, partner alcohol abuse, living in urban areas, lower LSI-A scores (less life satisfaction) and not having a stable partner. Lower LSI-A scores (worse life satisfaction) correlated with severe female economical problems, BMI values and UCLA-LS and MRS psychological scores. Loneliness and life satisfaction in this mid-aged female sample was influenced by personal and partner issues which seem to play a much more relevant role than biological aspects. More research is warranted in this regard. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.
Advanced Optical Technologies for Defense Trauma and Critical Care
2014-02-04
conventional LSI. We also demonstrated that mcLSI enables improved characterization of curved surfaces of the body by positioning LSI modules at...Implementation of an LED based clinical spatial frequency domain imaging 17 system. Proc SPIE Vol. 8254, Emerging Digital Micromirror Device Based
Phosphinosilylenes as a novel ligand system for heterobimetallic complexes.
Breit, Nora C; Eisenhut, Carsten; Inoue, Shigeyoshi
2016-04-25
A dihydrophosphinosilylene iron complex [LSi{Fe(CO)4}PH2] has been prepared and utilized in the synthesis of novel heterobimetallic complexes. The phosphine moiety in this phosphinosilylene complex allows coordination towards tungsten leading to the iron-tungsten heterobimetallic complex [LSi{Fe(CO)4}PH2{W(CO)5}]. In contrast, the reaction of [LSi{Fe(CO)4}PH2] with ethylenebis(triphenylphosphine)platinum(0) results in the formation of the iron-platinum heterobimetallic complex [LSi{Fe(CO)4}PH{PtH(PPh3)2}] via oxidative addition.
Hecht, Nils; Woitzik, Johannes; König, Susanne; Horn, Peter; Vajkoczy, Peter
2013-07-01
Currently, there is no adequate technique for intraoperative monitoring of cerebral blood flow (CBF). To evaluate laser speckle imaging (LSI) for assessment of relative CBF, LSI was performed in 30 patients who underwent direct surgical revascularization for treatment of arteriosclerotic cerebrovascular disease (ACVD), Moyamoya disease (MMD), or giant aneurysms, and in 8 control patients who underwent intracranial surgery for reasons other than hemodynamic compromise. The applicability and sensitivity of LSI was investigated through baseline perfusion and CO2 reactivity testing. The dynamics of LSI were assessed during bypass test occlusion and flow initiation procedures. Laser speckle imaging permitted robust (pseudo-) quantitative assessment of relative microcirculatory flow and standard bypass grafting resulted in significantly higher postoperative baseline perfusion values in ACVD and MMD. The applicability and sensitivity of LSI was shown by a significantly reduced CO2 reactivity in ACVD (9.6±9%) and MMD (8.5±8%) compared with control (31.2±5%; P<0.0001). In high- and intermediate-flow bypass patients, LSI was characterized by a dynamic real-time response to acute perfusion changes and ultimately confirmed a sufficient flow substitution through the bypass graft. Thus, LSI can be used for sensitive and continuous, non-invasive real-time visualization and measurement of relative cortical CBF in excellent spatial-temporal resolution.
NASA Technical Reports Server (NTRS)
Ratner, R. S.; Shapiro, E. B.; Zeidler, H. M.; Wahlstrom, S. E.; Clark, C. B.; Goldberg, J.
1973-01-01
This final report summarizes the work on the design of a fault tolerant digital computer for aircraft. Volume 2 is composed of two parts. Part 1 is concerned with the computational requirements associated with an advanced commercial aircraft. Part 2 reviews the technology that will be available for the implementation of the computer in the 1975-1985 period. With regard to the computation task 26 computations have been categorized according to computational load, memory requirements, criticality, permitted down-time, and the need to save data in order to effect a roll-back. The technology part stresses the impact of large scale integration (LSI) on the realization of logic and memory. Also considered was module interconnection possibilities so as to minimize fault propagation.
Synchronized voltage contrast display analysis system
NASA Technical Reports Server (NTRS)
Johnston, M. F.; Shumka, A.; Miller, E.; Evans, K. C. (Inventor)
1982-01-01
An apparatus and method for comparing internal voltage potentials of first and second operating electronic components such as large scale integrated circuits (LSI's) in which voltage differentials are visually identified via an appropriate display means are described. More particularly, in a first embodiment of the invention a first and second scanning electron microscope (SEM) are configured to scan a first and second operating electronic component respectively. The scan pattern of the second SEM is synchronized to that of the first SEM so that both simultaneously scan corresponding portions of the two operating electronic components. Video signals from each SEM corresponding to secondary electron signals generated as a result of a primary electron beam intersecting each operating electronic component in accordance with a predetermined scan pattern are provided to a video mixer and color encoder.
LSI-based amperometric sensor for bio-imaging and multi-point biosensing.
Inoue, Kumi Y; Matsudaira, Masahki; Kubo, Reyushi; Nakano, Masanori; Yoshida, Shinya; Matsuzaki, Sakae; Suda, Atsushi; Kunikata, Ryota; Kimura, Tatsuo; Tsurumi, Ryota; Shioya, Toshihito; Ino, Kosuke; Shiku, Hitoshi; Satoh, Shiro; Esashi, Masayoshi; Matsue, Tomokazu
2012-09-21
We have developed an LSI-based amperometric sensor called "Bio-LSI" with 400 measurement points as a platform for electrochemical bio-imaging and multi-point biosensing. The system is comprised of a 10.4 mm × 10.4 mm CMOS sensor chip with 20 × 20 unit cells, an external circuit box, a control unit for data acquisition, and a DC power box. Each unit cell of the chip contains an operational amplifier with a switched-capacitor type I-V converter for in-pixel signal amplification. We successfully realized a wide dynamic range from ±1 pA to ±100 nA with a well-organized circuit design and operating software. In particular, in-pixel signal amplification and an original program to control the signal read-out contribute to the lower detection limit and wide detection range of Bio-LSI. The spacial resolution is 250 μm and the temporal resolution is 18-125 ms/400 points, which depends on the desired current detection range. The coefficient of variance of the current for 400 points is within 5%. We also demonstrated the real-time imaging of a biological molecule using Bio-LSI. The LSI coated with an Os-HRP film was successfully applied to the monitoring of the changes of hydrogen peroxide concentration in a flow. The Os-HRP-coated LSI was spotted with glucose oxidase and used for bioelectrochemical imaging of the glucose oxidase (GOx)-catalyzed oxidation of glucose. Bio-LSI is a promising platform for a wide range of analytical fields, including diagnostics, environmental measurements and basic biochemistry.
The Role of Laser Speckle Imaging in Port-Wine Stain Research: Recent Advances and Opportunities
Choi, Bernard; Tan, Wenbin; Jia, Wangcun; White, Sean M.; Moy, Wesley J.; Yang, Bruce Y.; Zhu, Jiang; Chen, Zhongping; Kelly, Kristen M.; Nelson, J. Stuart
2016-01-01
Here, we review our current knowledge on the etiology and treatment of port-wine stain (PWS) birthmarks. Current treatment options have significant limitations in terms of efficacy. With the combination of 1) a suitable preclinical microvascular model, 2) laser speckle imaging (LSI) to evaluate blood-flow dynamics, and 3) a longitudinal experimental design, rapid preclinical assessment of new phototherapies can be translated from the lab to the clinic. The combination of photodynamic therapy (PDT) and pulsed-dye laser (PDL) irradiation achieves a synergistic effect that reduces the required radiant exposures of the individual phototherapies to achieve persistent vascular shutdown. PDL combined with anti-angiogenic agents is a promising strategy to achieve persistent vascular shutdown by preventing reformation and reperfusion of photocoagulated blood vessels. Integration of LSI into the clinical workflow may lead to surgical image guidance that maximizes acute photocoagulation, is expected to improve PWS therapeutic outcome. Continued integration of noninvasive optical imaging technologies and biochemical analysis collectively are expected to lead to more robust treatment strategies. PMID:27013846
Okabe, Kenji; Jeewan, Horagodage Prabhath; Yamagiwa, Shota; Kawano, Takeshi; Ishida, Makoto; Akita, Ippei
2015-12-16
In this paper, a co-design method and a wafer-level packaging technique of a flexible antenna and a CMOS rectifier chip for use in a small-sized implantable system on the brain surface are proposed. The proposed co-design method optimizes the system architecture, and can help avoid the use of external matching components, resulting in the realization of a small-size system. In addition, the technique employed to assemble a silicon large-scale integration (LSI) chip on the very thin parylene film (5 μm) enables the integration of the rectifier circuits and the flexible antenna (rectenna). In the demonstration of wireless power transmission (WPT), the fabricated flexible rectenna achieved a maximum efficiency of 0.497% with a distance of 3 cm between antennas. In addition, WPT with radio waves allows a misalignment of 185% against antenna size, implying that the misalignment has a less effect on the WPT characteristics compared with electromagnetic induction.
Okabe, Kenji; Jeewan, Horagodage Prabhath; Yamagiwa, Shota; Kawano, Takeshi; Ishida, Makoto; Akita, Ippei
2015-01-01
In this paper, a co-design method and a wafer-level packaging technique of a flexible antenna and a CMOS rectifier chip for use in a small-sized implantable system on the brain surface are proposed. The proposed co-design method optimizes the system architecture, and can help avoid the use of external matching components, resulting in the realization of a small-size system. In addition, the technique employed to assemble a silicon large-scale integration (LSI) chip on the very thin parylene film (5 μm) enables the integration of the rectifier circuits and the flexible antenna (rectenna). In the demonstration of wireless power transmission (WPT), the fabricated flexible rectenna achieved a maximum efficiency of 0.497% with a distance of 3 cm between antennas. In addition, WPT with radio waves allows a misalignment of 185% against antenna size, implying that the misalignment has a less effect on the WPT characteristics compared with electromagnetic induction. PMID:26694407
Yoo, Hye Jin; Hong, Jin Pyo; Cho, Maeng Je; Fava, Maurizio; Mischoulon, David; Heo, Jung-Yoon; Kim, Kiwon; Jeon, Hong Jin
2016-10-01
Major depressive disorder (MDD) is a well-known risk factor for suicidality, but depressed mood has been used non-specifically to describe the emotional state. We sought to compare influence of MDD versus sustained depressed mood on suicidality. A total of 12,532 adults, randomly selected through the one-person-per-household method, completed a face-to-face interview using the Korean version of Composite International Diagnostic Interview (K-CIDI) and a questionnaire for lifetime suicidal ideation (LSI) and lifetime suicidal attempt (LSA). Of 12,361 adults, 565 were assessed as 'sustained depressed mood group' having depressed mood for more than two weeks without MDD (4.6%), and 810 adults were assessed as having full MDD (6.55%) which consisted of 'MDD with depressed mood group' (6.0%) and 'MDD without depressed mood group' (0.5%). The MDD with depressed mood group showed higher odds ratios for LSI and LSA than the sustained depressed mood group. Contrarily, no significant differences were found in LSI and LSA between the MDD group with and without depressed mood. MDD showed significant associations with LSI (AOR=2.83, 95%CI 2.12-3.78) and LSA (AOR=2.17, 95%CI 1.34-3.52), whereas sustained depressed mood showed significant associations with neither LSI nor LSA after adjusting for MDD and other psychiatric comorbidities. Interaction effect of sustained depressed mood with MDD was significant for LSI but not for LSA. Sustained depressed mood was not related to LSI and LSA after adjusting for psychiatric comorbidities, whereas MDD was significantly associated with both LSI and LSA regardless of the presence of sustained depressed mood. Copyright © 2016 Elsevier B.V. All rights reserved.
NASA Technical Reports Server (NTRS)
1981-01-01
The set of computer programs described allows for data definition, data input, and data transfer between the LSI-11 microcomputers and the VAX-11/780 minicomputer. Program VAXCOM allows for a simple method of textual file transfer from the LSI to the VAX. Program LSICOM allows for easy file transfer from the VAX to the LSI. Program TTY changes the LSI-11 operators console to the LSI's printing device. Program DICTIN provides a means for defining a data set for input to either computer. Program DATAIN is a simple to operate data entry program which is capable of building data files on either machine. Program LEDITV is an extremely powerful, easy to use, line oriented text editor. Program COPYSBF is designed to print out textual files on the line printer without character loss from FORTRAN carriage control or wide record transfer.
Magnetomotive laser speckle imaging
Kim, Jeehyun; Oh, Junghwan; Choi, Bernard
2010-01-01
Laser speckle imaging (LSI) involves analysis of reflectance images collected during coherent optical excitation of an object to compute wide-field maps of tissue blood flow. An intrinsic limitation of LSI for resolving microvascular architecture is that its signal depends on relative motion of interrogated red blood cells. Hence, with LSI, small-diameter arterioles, venules, and capillaries are difficult to resolve due to the slow flow speeds associated with such vasculature. Furthermore, LSI characterization of subsurface blood flow is subject to blurring due to scattering, further limiting the ability of LSI to resolve or quantify blood flow in small vessels. Here, we show that magnetic activation of superparamagnetic iron oxide (SPIO) nanoparticles modulate the speckle flow index (SFI) values estimated from speckle contrast analysis of collected images. With application of an ac magnetic field to a solution of stagnant SPIO particles, an apparent increase in SFI is induced. Furthermore, with application of a focused dc magnetic field, a focal decrease in SFI values is induced. Magnetomotive LSI may enable wide-field mapping of suspicious tissue regions, enabling subsequent high-resolution optical interrogation of these regions. Similarly, subsequent photoactivation of intravascular SPIO nanoparticles could then be performed to induce selective photothermal destruction of unwanted vasculature. PMID:20210436
Laser Speckle Imaging of Blood Flow Beneath Static Scattering Media
NASA Astrophysics Data System (ADS)
Regan, Caitlin Anderson
Laser speckle imaging (LSI) is a wide-field optical imaging technique that provides information about the movement of scattering particles in biological samples. LSI is used to create maps of relative blood flow and perfusion in samples such as the skin, brain, teeth, gingiva, and other biological tissues. The presence of static, or non-moving, optical scatterers affects the ability of LSI to provide true quantitative and spatially resolved measurements of blood flow. With in vitro experiments using tissue-simulating phantoms, we determined that temporal analysis of raw speckle image sequences improved the quantitative accuracy of LSI to measure flow beneath a static scattering layer. We then applied the temporal algorithm to assess the potential of LSI to monitor oral health. We designed and tested two generations of miniature LSI devices to measure flow in the pulpal chamber of teeth and in the gingiva. Our preliminary clinical pilot data indicated that speckle contrast may correlate with gingival health. To improve visualization of subsurface blood vessels, we developed a technique called photothermal LSI. We applied a short pulse of laser energy to selectively perturb the motion of red blood cells, increasing the signal from vasculature relative to the surroundings. To study the spectral and depth dependence of laser speckle contrast, we developed a Monte Carlo model of light and momentum transport to simulate speckle contrast. With an increase in the thickness of the overlying static-scattering layer, we observed a quadratic decrease in the quantity of dynamically scattered light collected by the detector. We next applied the model to study multi-exposure speckle imaging (MESI), a method that purportedly improves quantitative accuracy of subsurface blood flow measurements. We unexpectedly determined that MESI faced similar depth limitations as conventional LSI, findings that were supported by in vitro experimental data. Finally, we used the model to study the effects of epidermal melanin absorption on LSI, and demonstrated that speckle contrast is less sensitive to varying melanin content than reflectance. We then proposed a two-wavelength measurement protocol that may enable melanin-independent LSI measurements of blood flow in patients with varying skin types. In conclusion, through in vitro and in silico experiments, we were able to further the understanding of the depth dependent origins of laser speckle contrast as well as the inherent limitations of this technology.
Brorsson, Annelie; Willy, Richard W; Tranberg, Roy; Grävare Silbernagel, Karin
2017-11-01
It is unknown whether the height of a heel-rise performed in the single-leg standing heel-rise test 1 year after an Achilles tendon rupture (ATR) correlates with ankle biomechanics during walking, jogging, and jumping in the long-term. To explore the differences in ankle biomechanics, tendon length, calf muscle recovery, and patient-reported outcomes at a mean of 6 years after ATR between 2 groups that, at 1-year follow-up, had less than 15% versus greater than 30% differences in heel-rise height. Cohort study; Level of evidence, 3. Seventeen patients with less than 15% (<15% group) and 17 patients with greater than 30% (>30% group) side-to-side difference in heel-rise height at 1 year after ATR were evaluated at a mean (SD) 6.1 (2.0) years after their ATR. Ankle kinematics and kinetics were sampled via standard motion capture procedures during walking, jogging, and jumping. Patient-reported outcome was evaluated with Achilles tendon Total Rupture Score (ATRS), Physical Activity Scale (PAS), and Foot and Ankle Outcome Score (FAOS). Tendon length was evaluated by ultrasonography. The Limb Symmetry Index (LSI = [Injured Side ÷ Healthy Side] × 100) was calculated for side differences. The >30% group had significantly more deficits in ankle kinetics during all activities compared with patients in the <15% group at a mean of 6 years after ATR (LSI, 70%-149% and 84%-106%, respectively; P = .010-.024). The >30% group, compared with the <15% group, also had significantly lower values in heel-rise height (LSI, 72% and 95%, respectively; P < .001) and heel-rise work (LSI, 58% and 91%, respectively; P < .001) and significantly larger side-to-side difference in tendon length (114% and 106%, respectively; P = .012). Achilles tendon length correlated with ankle kinematic variables ( r = 0.38-0.44; P = .015-.027) whereas heel-rise work correlated with kinetic variables ( r = -0.57 to 0.56; P = .001-.047). LSI tendon length correlated negatively with LSI heel-rise height ( r = -0.41; P = .018). No differences were found between groups in patient-reported outcome ( P = .143-.852). Height obtained during the single-leg standing heel-rise test performed 1 year after ATR related to the long-term ability to regain normal ankle biomechanics. Minimizing tendon elongation and regaining heel-rise height may be important for the long-term recovery of ankle biomechanics, particularly during more demanding activities such as jumping.
Empirical molecular-dynamics study of diffusion in liquid semiconductors
NASA Astrophysics Data System (ADS)
Yu, W.; Wang, Z. Q.; Stroud, D.
1996-11-01
We report the results of an extensive molecular-dynamics study of diffusion in liquid Si and Ge (l-Si and l-Ge) and of impurities in l-Ge, using empirical Stillinger-Weber (SW) potentials with several choices of parameters. We use a numerical algorithm in which the three-body part of the SW potential is decomposed into products of two-body potentials, thereby permitting the study of large systems. One choice of SW parameters agrees very well with the observed l-Ge structure factors. The diffusion coefficients D(T) at melting are found to be approximately 6.4×10-5 cm2/s for l-Si, in good agreement with previous calculations, and about 4.2×10-5 and 4.6×10-5 cm2/s for two models of l-Ge. In all cases, D(T) can be fitted to an activated temperature dependence, with activation energies Ed of about 0.42 eV for l-Si, and 0.32 or 0.26 eV for two models of l-Ge, as calculated from either the Einstein relation or from a Green-Kubo-type integration of the velocity autocorrelation function. D(T) for Si impurities in l-Ge is found to be very similar to the self-diffusion coefficient of l-Ge. We briefly discuss possible reasons why the SW potentials give D(T)'s substantially lower than ab initio predictions.
EMSE at TREC 2015 Clinical Decision Support Track
2015-11-20
pseudo relevant documents, semantic ressources of UMLS , and a hybrid approach called SMERA that combines LSI and UMLS based approaches. Only three of...approach to query expansion uses ontologies ( UMLS ) and a lo- cal approach based on pseudo relevant feedback documents using LSI. A brief description of...pseudo relevance feedback documents, and a semantic method based on UMLS concepts. The LSI-based method was used only to expand summary terms that can’t
Next-generation digital camera integration and software development issues
NASA Astrophysics Data System (ADS)
Venkataraman, Shyam; Peters, Ken; Hecht, Richard
1998-04-01
This paper investigates the complexities associated with the development of next generation digital cameras due to requirements in connectivity and interoperability. Each successive generation of digital camera improves drastically in cost, performance, resolution, image quality and interoperability features. This is being accomplished by advancements in a number of areas: research, silicon, standards, etc. As the capabilities of these cameras increase, so do the requirements for both hardware and software. Today, there are two single chip camera solutions in the market including the Motorola MPC 823 and LSI DCAM- 101. Real time constraints for a digital camera may be defined by the maximum time allowable between capture of images. Constraints in the design of an embedded digital camera include processor architecture, memory, processing speed and the real-time operating systems. This paper will present the LSI DCAM-101, a single-chip digital camera solution. It will present an overview of the architecture and the challenges in hardware and software for supporting streaming video in such a complex device. Issues presented include the development of the data flow software architecture, testing and integration on this complex silicon device. The strategy for optimizing performance on the architecture will also be presented.
Study of silicon carbide formation by liquid silicon infiltration of porous carbon structures
NASA Astrophysics Data System (ADS)
Margiotta, Jesse C.
Silicon carbide (SiC) materials are prime candidates for high temperature heat exchangers for next generation nuclear reactors due to their refractory nature and high thermal conductivity at elevated temperatures. This research has focused on demonstrating the potential of liquid silicon infiltration (LSI) for making SiC to achieve this goal. The major advantage of this method over other ceramic processing techniques is the enhanced capability of making fully dense, high purity SiC materials in complex net shapes. For successful formation of net shape SiC using LSI techniques, the carbon preform reactivity and pore structure must be controlled to allow the complete infiltration of the porous carbon structure followed by conversion of this carbon to SiC. We have established a procedure for achieving desirable carbon properties by using carbon precursors consisting of two readily available high purity organic materials, crystalline cellulose and phenolic resin. Phenolic resin yields a glassy carbon with low reactivity and porosity, and cellulose carbon is highly reactive and porous. By adjusting the ratio of these two materials in the precursor mixtures, the properties of the carbons produced can be controlled. We have identified the most favorable carbon precursor composition to be a cellulose:resin mass ratio of 6:4 for LSI formation of SiC. The optimum reaction conditions are a temperature of 1800°C, a pressure of 0.5 Torr of argon, and a time of 120 minutes. The fully dense net shape SiC material produced has a density of 2.96 g cm-3 (about 92% of pure SiC) and a SiC volume fraction of over 0.82. Kinetics of the LSI SiC formation process were studied by optical microscopy and quantitative digital image analysis. This study identified six reaction stages and provided important understanding of the process. Such knowledge can be used to further refine the LSI technique. Although the thermal conductivity of pure SiC at elevated temperatures is very high, thermal conductivities of most commercial SiC materials are much lower due to phonon scattering by impurities (e.g., sintering aids located at the grain boundaries of these materials). The thermal conductivity of our SiC was determined using the laser flash method and it is 214 W/mK at 373 K and 64 W/mK at 1273 K. These values are very close to those of pure SiC and are much higher than those of SiC materials made by industrial processes. Thus, SiC made by our LSI process is an ideally suited material for use in high temperature heat exchanger applications. Electron probe microanalysis (EPMA) and Auger electron spectroscopy (AES) were used to study the chemical composition of LSI SiC materials. Optimized low voltage microanalysis conditions for EPMA of SiC were theoretically determined. EPMA and AES measurements indicate that the SiC phase in our materials is slightly carbon rich. Carbon contamination was identified as a possible source of error during EPMA of SiC, and this error was corrected by using high purity SiC standards. Cellulose and phenolic resin carbons lack the well-defined atomic structures associated with common carbon allotropes. Atomic-scale structure was studied using high resolution transmission electron microscopy (HRTEM), nitrogen gas adsorption and helium gas pycnometry. These studies revealed that cellulose carbon exhibits a very high degree of atomic disorder and angstrom-scale porosity. It has a density of only 93% of that of pure graphite, with primarily sp2 bonding character and a low concentration of graphene clusters. Phenolic resin carbon shows more structural order and substantially less angstrom-scale porosity. Its density is 98% of that of pure graphite, and Fourier transform analysis of its TEM micrographs has revealed high concentrations of sp3 diamond and sp 2 graphene nano-clusters. This is the first time that diamond nano-clusters have been observed in carbons produced from phenolic resin.
NASA Astrophysics Data System (ADS)
Ponticorvo, A.; Rowland, R.; Yang, B.; Lertsakdadet, B.; Crouzet, C.; Bernal, N.; Choi, B.; Durkin, A. J.
2017-02-01
Burn wounds are often characterized by injury depth, which then dictates wound management strategy. While most superficial burns and full thickness burns can be diagnosed through visual inspection, clinicians experience difficulty with accurate diagnosis of burns that fall between these extremes. Accurately diagnosing burn severity in a timely manner is critical for starting the appropriate treatment plan at the earliest time points to improve patient outcomes. To address this challenge, research groups have studied the use of commercial laser Doppler imaging (LDI) systems to provide objective characterization of burn-wound severity. Despite initial promising findings, LDI systems are not commonplace in part due to long acquisition times that can suffer from artifacts in moving patients. Commercial LDI systems are being phased out in favor of laser speckle imaging (LSI) systems that can provide similar information with faster acquisition speeds. To better understand the accuracy and usefulness of commercial LSI systems in burn-oriented research, we studied the performance of a commercial LSI system in three different sample systems and compared its results to a research-grade LSI system in the same environments. The first sample system involved laboratory measurements of intralipid (1%) flowing through a tissue simulating phantom, the second preclinical measurements in a controlled burn study in which wounds of graded severity were created on a Yorkshire pig, and the third clinical measurements involving a small sample of clinical patients. In addition to the commercial LSI system, a research grade LSI system that was designed and fabricated in our labs was used to quantitatively compare the performance of both systems and also to better understand the "Perfusion Unit" output of commercial systems.
Travers, Karin; Sallum, Rachel H; Burns, Meghan D; Barr, Charles E; Beattie, Mary S; Pashos, Chris L; Luce, Bryan R
2015-01-01
Purpose Patient registries are used to monitor safety, examine real-world effectiveness, and may potentially contribute to comparative effectiveness research. To our knowledge, life sciences industry (LSI)-sponsored registries have not been systematically categorized. This study represents a first step toward understanding such registries over time. Methods Studies described as registries were identified in the ClinicalTrials.gov database. Characteristics from these registry records were abstracted and analyzed. Results Of 1202 registries identified, approximately 47% reported LSI sponsorship. These 562 LSI registries varied in focus: medical devices (n = 193, 34%), specific drugs (n = 173, 31%), procedures (n = 29, 5%), or particular diseases (n = 139, 25%). Thirty-three registries (<6%) evaluated pregnancy outcomes. The most common therapeutic area was cardiovascular (n = 234, 42%); others included endocrinology, immunology, oncology, musculoskeletal disorders, and neurology. The two most often measured outcomes were clinical effectiveness and safety, each of which appeared in 363/562 (65%) of LSI registries. Other outcomes included real-world clinical practice patterns (n = 122, 22%), patient-reported outcomes (n = 106, 19%), disease epidemiology/natural history (n = 69, 12%), and economic outcomes (n = 30, 5%). The number of LSI registries and their geographic diversity has increased over time. Conclusions The LSI registries represent a substantial proportion of all patient registries documented in ClinicalTrials.gov. These prospective studies are growing in number and encompass diverse therapeutic areas and geographic regions. Most registries measure multiple outcomes and capture real-world data that may be unavailable through other study designs. This classification of LSI registries documents their use for studying heterogeneity of diseases, examining treatment patterns, measuring patient-reported outcomes, examining economic outcomes, and performing comparative effectiveness research. © 2014 The Authors. Pharmacoepidemiology and Drug Safety published by John Wiley & Sons, Ltd. PMID:25079108
Chen, Defu; Ren, Jie; Wang, Ying; Zhao, Hongyou; Li, Buhong; Gu, Ying
2016-03-01
Laser Doppler imaging (LDI) and laser speckle imaging (LSI) are two major optical techniques aiming at non-invasively imaging the skin blood perfusion. However, the relationship between perfusion values determined by LDI and LSI has not been fully explored. 8 healthy volunteers and 13 PWS patients were recruited. The perfusions in normal skin on the forearm of 8 healthy volunteers were simultaneously measured by both LDI and LSI during post-occlusive reactive hyperemia (PORH). Furthermore, the perfusions of port wine stains (PWS) lesions and contralateral normal skin of 10 PWS patients were also determined. In addition, the perfusions for PWS lesions from 3 PWS patients were successively monitored at 0, 10 and 20min during vascular-targeted photodynamic therapy (V-PDT). The average perfusion values determined by LSI were compared with those of LDI for each subject. In the normal skin during PORH, power function provided better fits of perfusion values than linear function: powers for individual subjects go from 1.312 to 1.942 (R(2)=0.8967-0.9951). There was a linear relationship between perfusion values determined by LDI and LSI in PWS and contralateral normal skin (R(2)=0.7308-0.9623), and in PWS during V-PDT (R(2)=0.8037-0.9968). The perfusion values determined by LDI and LSI correlate closely in normal skin and PWS over a broad range of skin perfusion. However, it still suggests that perfusion range and characteristics of the measured skin should be carefully considered if LDI and LSI measures are compared. Copyright © 2015 Elsevier B.V. All rights reserved.
Use of a Microprocessor to Implement an ADCCP Protocol (Federal Standard 1003).
1980-07-01
results of other studies, to evaluate the operational and economic impact of incorporating various options in Federal Standard 1003. The effort...the LSI interface and the microprocessor; the LSI chip deposits bytes in its buffer as the producer, and the MPU reads this data as the consumer...on the interface between the MPU and the LSI protocol chip. This requires two main processes to be running at the same time--transmit and receive. The
NASA Technical Reports Server (NTRS)
1974-01-01
The work is described which was accomplished during the investigation of the application of dry-tuned gimbal gyroscopes to strapdown navigation systems. A conventional strapdown configuration, employing analog electronics in conjunction with digital attitude and navigation computation, was examined using various levels of redundancy and both orthogonal and nonorthogonal sensor orientations. It is concluded that the cost and reliability performance constraints which had been established could not be met simultaneously with such a system. This conclusion led to the examination of an alternative system configuration which utilizes an essentially new strapdown system concept. This system employs all-digital signal processing in conjunction with the newly-developed large scale integration (LSI) electronic packaging techniques and a new two-degree-of-freedom dry tuned-gimbal instrument which is capable of providing both angular rate and acceleration information. Such a system is capable of exceeding the established performance goals.
Breadboard linear array scan imager using LSI solid-state technology
NASA Technical Reports Server (NTRS)
Tracy, R. A.; Brennan, J. A.; Frankel, D. G.; Noll, R. E.
1976-01-01
The performance of large scale integration photodiode arrays in a linear array scan (pushbroom) breadboard was evaluated for application to multispectral remote sensing of the earth's resources. The technical approach, implementation, and test results of the program are described. Several self scanned linear array visible photodetector focal plane arrays were fabricated and evaluated in an optical bench configuration. A 1728-detector array operating in four bands (0.5 - 1.1 micrometer) was evaluated for noise, spectral response, dynamic range, crosstalk, MTF, noise equivalent irradiance, linearity, and image quality. Other results include image artifact data, temporal characteristics, radiometric accuracy, calibration experience, chip alignment, and array fabrication experience. Special studies and experimentation were included in long array fabrication and real-time image processing for low-cost ground stations, including the use of computer image processing. High quality images were produced and all objectives of the program were attained.
NASA Technical Reports Server (NTRS)
Roth, J. P.
1972-01-01
The following problems are considered: (1) methods for development of logic design together with algorithms, so that it is possible to compute a test for any failure in the logic design, if such a test exists, and developing algorithms and heuristics for the purpose of minimizing the computation for tests; and (2) a method of design of logic for ultra LSI (large scale integration). It was discovered that the so-called quantum calculus can be extended to render it possible: (1) to describe the functional behavior of a mechanism component by component, and (2) to compute tests for failures, in the mechanism, using the diagnosis algorithm. The development of an algorithm for the multioutput two-level minimization problem is presented and the program MIN 360 was written for this algorithm. The program has options of mode (exact minimum or various approximations), cost function, cost bound, etc., providing flexibility.
NASA Technical Reports Server (NTRS)
Shyy, Dong-Jye; Redman, Wayne
1993-01-01
For the next-generation packet switched communications satellite system with onboard processing and spot-beam operation, a reliable onboard fast packet switch is essential to route packets from different uplink beams to different downlink beams. The rapid emergence of point-to-point services such as video distribution, and the large demand for video conference, distributed data processing, and network management makes the multicast function essential to a fast packet switch (FPS). The satellite's inherent broadcast features gives the satellite network an advantage over the terrestrial network in providing multicast services. This report evaluates alternate multicast FPS architectures for onboard baseband switching applications and selects a candidate for subsequent breadboard development. Architecture evaluation and selection will be based on the study performed in phase 1, 'Onboard B-ISDN Fast Packet Switching Architectures', and other switch architectures which have become commercially available as large scale integration (LSI) devices.
Evaluating the effectiveness of a logger safety training program.
Bell, Jennifer L; Grushecky, Shawn T
2006-01-01
Logger safety training programs are rarely, if ever, evaluated as to their effectiveness in reducing injuries. Workers' compensation claim rates were used to evaluate the effectiveness of a logger safety training program, the West Virginia Loggers' Safety Initiative (LSI). There was no claim rate decline detected in the majority (67%) of companies that participated in all 4 years of the LSI. Furthermore, their rate did not differ from the rest of the WV logging industry that did not participate in the LSI. Worker turnover was significantly related to claim rates; companies with higher turnover of employees had higher claim rates. Companies using feller bunchers to harvest trees at least part of the time had a significantly lower claim rate than companies not using them. Companies that had more inspections per year had lower claim rates. High injury rates persist even in companies that receive safety training; high employee turnover may affect the efficacy of training programs. The logging industry should be encouraged to facilitate the mechanization of logging tasks, to address barriers to employee retention, and to increase the number of in-the-field performance monitoring inspections. Impact on industry There are many states whose logger safety programs include only about 4-8 hours of safe work practices training. These states may look to West Virginia's expanded training program (the LSI) as a model for their own programs. However, the LSI training may not be reaching loggers due to the delay in administering training to new employees and high levels of employee turnover. Regardless of training status, loggers' claim rates decline significantly the longer they work for a company. It may be that high injury rates in the state of West Virginia would be best addressed by finding ways to encourage and facilitate companies to become more mechanized in their harvesting practices, and to increase employee tenure. Increasing the number of yearly performance inspections may also be a venue to reduce claim rates. Future research could investigate in better detail the working conditions of West Virginia loggers and identify barriers to job tenure, particularly for workers whose primary job task is chainsaw operation. A larger-scale study of the effect of performance monitoring inspections on claim rates is also warranted.
Investigation of transient thermal dissipation in thinned LSI for advanced packaging
NASA Astrophysics Data System (ADS)
Araga, Yuuki; Shimamoto, Haruo; Melamed, Samson; Kikuchi, Katsuya; Aoyagi, Masahiro
2018-04-01
Thinning of LSI is necessary for superior form factor and performance in dense cutting-edge packaging technologies. At the same time, degradation of thermal characteristics caused by the steep thermal gradient on LSIs with thinned base silicon is a concern. To manage a thermal environment in advanced packages, thermal characteristics of the thinned LSIs must be clarified. In this study, static and dynamic thermal dissipations were analyzed before and after thinning silicon to determine variations of thermal characteristics in thinned LSI. Measurement results revealed that silicon thinning affects dynamic thermal characteristics as well as static one. The transient variations of thermal characteristics of thinned LSI are precisely verified by analysis using an equivalent model based on the thermal network method. The results of analysis suggest that transient thermal characteristics can be easily estimated by employing the equivalent model.
Using SVD on Clusters to Improve Precision of Interdocument Similarity Measure.
Zhang, Wen; Xiao, Fan; Li, Bin; Zhang, Siguang
2016-01-01
Recently, LSI (Latent Semantic Indexing) based on SVD (Singular Value Decomposition) is proposed to overcome the problems of polysemy and homonym in traditional lexical matching. However, it is usually criticized as with low discriminative power for representing documents although it has been validated as with good representative quality. In this paper, SVD on clusters is proposed to improve the discriminative power of LSI. The contribution of this paper is three manifolds. Firstly, we make a survey of existing linear algebra methods for LSI, including both SVD based methods and non-SVD based methods. Secondly, we propose SVD on clusters for LSI and theoretically explain that dimension expansion of document vectors and dimension projection using SVD are the two manipulations involved in SVD on clusters. Moreover, we develop updating processes to fold in new documents and terms in a decomposed matrix by SVD on clusters. Thirdly, two corpora, a Chinese corpus and an English corpus, are used to evaluate the performances of the proposed methods. Experiments demonstrate that, to some extent, SVD on clusters can improve the precision of interdocument similarity measure in comparison with other SVD based LSI methods.
Using SVD on Clusters to Improve Precision of Interdocument Similarity Measure
Xiao, Fan; Li, Bin; Zhang, Siguang
2016-01-01
Recently, LSI (Latent Semantic Indexing) based on SVD (Singular Value Decomposition) is proposed to overcome the problems of polysemy and homonym in traditional lexical matching. However, it is usually criticized as with low discriminative power for representing documents although it has been validated as with good representative quality. In this paper, SVD on clusters is proposed to improve the discriminative power of LSI. The contribution of this paper is three manifolds. Firstly, we make a survey of existing linear algebra methods for LSI, including both SVD based methods and non-SVD based methods. Secondly, we propose SVD on clusters for LSI and theoretically explain that dimension expansion of document vectors and dimension projection using SVD are the two manipulations involved in SVD on clusters. Moreover, we develop updating processes to fold in new documents and terms in a decomposed matrix by SVD on clusters. Thirdly, two corpora, a Chinese corpus and an English corpus, are used to evaluate the performances of the proposed methods. Experiments demonstrate that, to some extent, SVD on clusters can improve the precision of interdocument similarity measure in comparison with other SVD based LSI methods. PMID:27579031
Causality and Information Dynamics in Networked Systems with Many Agents
2017-05-11
representation, the LSI filter given by A(τ) must be invertible, and a sufficient condition for this invertibility is that there is some c > 0 such that the...linear shift-invariant (LSI) filter B̃ij(z) = ∑p τ=1Bij(τ)z −τ whose coefficients are arranged into a column vector B̃ij = (Bij(1), . . . , Bij(p)). In...to the adjacency matrix of the underlying graph, so that looking “depth-wise” at location ij gives the coefficients B̃ij ∈ IRp of the LSI filter from
Laser Speckle Imaging of Cerebral Blood Flow
NASA Astrophysics Data System (ADS)
Luo, Qingming; Jiang, Chao; Li, Pengcheng; Cheng, Haiying; Wang, Zhen; Wang, Zheng; Tuchin, Valery V.
Monitoring the spatio-temporal characteristics of cerebral blood flow (CBF) is crucial for studying the normal and pathophysiologic conditions of brain metabolism. By illuminating the cortex with laser light and imaging the resulting speckle pattern, relative CBF images with tens of microns spatial and millisecond temporal resolution can be obtained. In this chapter, a laser speckle imaging (LSI) method for monitoring dynamic, high-resolution CBF is introduced. To improve the spatial resolution of current LSI, a modified LSI method is proposed. To accelerate the speed of data processing, three LSI data processing frameworks based on graphics processing unit (GPU), digital signal processor (DSP), and field-programmable gate array (FPGA) are also presented. Applications for detecting the changes in local CBF induced by sensory stimulation and thermal stimulation, the influence of a chemical agent on CBF, and the influence of acute hyperglycemia following cortical spreading depression on CBF are given.
Laser speckle imaging in the spatial frequency domain
Mazhar, Amaan; Cuccia, David J.; Rice, Tyler B.; Carp, Stefan A.; Durkin, Anthony J.; Boas, David A.; Choi, Bernard; Tromberg, Bruce J.
2011-01-01
Laser Speckle Imaging (LSI) images interference patterns produced by coherent addition of scattered laser light to map subsurface tissue perfusion. However, the effect of longer path length photons is typically unknown and poses a limitation towards absolute quantification. In this work, LSI is integrated with spatial frequency domain imaging (SFDI) to suppress multiple scattering and absorption effects. First, depth sensitive speckle contrast is shown in phantoms by separating a deep source (4 mm) from a shallow source (2 mm) of speckle contrast by using a high spatial frequency of illumination (0.24 mm−1). We develop an SFD adapted correlation diffusion model and show that with high frequency (0.24 mm−1) illumination, doubling of absorption contrast results in only a 1% change in speckle contrast versus 25% change using a planar unmodulated (0 mm−1) illumination. Similar absorption change is mimicked in vivo imaging a finger occlusion and the relative speckle contrast change from baseline is 10% at 0.26 mm−1 versus 60% at 0 mm−1 during a finger occlusion. These results underscore the importance of path length and optical properties in determining speckle contrast. They provide an integrated approach for simultaneous mapping of blood flow (speckle contrast) and oxygenation (optical properties) which can be used to inform tissue metabolism. PMID:21698018
CEOS Land Surface Imaging Constellation Mid-Resolution Optical Guidelines
NASA Technical Reports Server (NTRS)
Keyes, Jennifer P.; Killough, B.
2011-01-01
The LSI community of users is large and varied. To reach all these users as well as potential instrument contributors this document has been organized by measurement parameters of interest such as Leaf Area Index and Land Surface Temperature. These measurement parameters and the data presented in this document are drawn from multiple sources, listed at the end of the document, although the two primary ones are "The Space-Based Global Observing System in 2010 (GOS-2010)" that was compiled for the World Meteorological Organization (WMO) by Bizzarro Bizzarri, and the CEOS Missions, Instruments, and Measurements online database (CEOS MIM). For each measurement parameter the following topics will be discussed: (1) measurement description, (2) applications, (3) measurement spectral bands, and (4) example instruments and mission information. The description of each measurement parameter starts with a definition and includes a graphic displaying the relationships to four general land surface imaging user communities: vegetation, water, earth, and geo-hazards, since the LSI community of users is large and varied. The vegetation community uses LSI data to assess factors related to topics such as agriculture, forest management, crop type, chlorophyll, vegetation land cover, and leaf or canopy differences. The water community analyzes snow and lake cover, water properties such as clarity, and body of water delineation. The earth community focuses on minerals, soils, and sediments. The geo-hazards community is designed to address and aid in emergencies such as volcanic eruptions, forest fires, and large-scale damaging weather-related events.
Federal Register 2010, 2011, 2012, 2013, 2014
2010-02-01
... inclusion of the standard formula). This is because, in developing the minimum franchise fee to be included... acquiring the existing LSI (and any required new LSI improvements). The minimum franchise fee, accordingly...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-10-31
... are applicable to fleets comprised of four or more pieces of equipment powered by LSI engines... comment. If you send an email comment directly to EPA without going through http://www.regulations.gov...
NASA Technical Reports Server (NTRS)
Clark, R. T.; Mccallister, R. D.
1982-01-01
The particular coding option identified as providing the best level of coding gain performance in an LSI-efficient implementation was the optimal constraint length five, rate one-half convolutional code. To determine the specific set of design parameters which optimally matches this decoder to the LSI constraints, a breadboard MCD (maximum-likelihood convolutional decoder) was fabricated and used to generate detailed performance trade-off data. The extensive performance testing data gathered during this design tradeoff study are summarized, and the functional and physical MCD chip characteristics are presented.
Screening and Expression of a Silicon Transporter Gene (Lsi1) in Wild-Type Indica Rice Cultivars.
Sahebi, Mahbod; Hanafi, Mohamed M; Rafii, M Y; Azizi, Parisa; Abiri, Rambod; Kalhori, Nahid; Atabaki, Narges
2017-01-01
Silicon (Si) is one of the most prevalent elements in the soil. It is beneficial for plant growth and development, and it contributes to plant defense against different stresses. The Lsi1 gene encodes a Si transporter that was identified in a mutant Japonica rice variety. This gene was not identified in fourteen Malaysian rice varieties during screening. Then, a mutant version of Lsi1 was substituted for the native version in the three most common Malaysian rice varieties, MR219, MR220, and MR276, to evaluate the function of the transgene. Real-time PCR was used to explore the differential expression of Lsi1 in the three transgenic rice varieties. Silicon concentrations in the roots and leaves of transgenic plants were significantly higher than in wild-type plants. Transgenic varieties showed significant increases in the activities of the enzymes SOD, POD, APX, and CAT; photosynthesis; and chlorophyll content; however, the highest chlorophyll A and B levels were observed in transgenic MR276. Transgenic varieties have shown a stronger root and leaf structure, as well as hairier roots, compared to the wild-type plants. This suggests that Lsi1 plays a key role in rice, increasing the absorption and accumulation of Si, then alters antioxidant activities, and improves morphological properties.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kuester, W.; Seidl, G.; Linkesch, W.
1981-10-01
For the diagnosis of primary osteoporosis, various semiquantitative radiologic methods were compared in 149 unselected patients, aged over 50 years. Crush fracture syndrome (CFS), lumbar spine index (LSI), and Singh Index (SI) were assessed by three radiologists and after reevaluation, the intra- and interobserver errors were calculated. The reliability of the subjective grading was improved by joint and repeated reading of the radiographs. Additionally, the peripheral trabecular bone content was measured by photon absorption densitometry (PAD). To test the value of the various semiquantitative methods. LSI, Si, and PAD have been compared with sex-matching before and after separation into agemore » in decades in CFS-positive and CFS-negative patients. In an attempt to differentiate osteoporotics and non-osteoporotics by CFS, our results indicate that CFS-positive and CFS-negative males cannot be separated by LSI, Si, and PAD, whereas in females these methods can discriminate irrespective of the age in decades. However, in age related groups, only SI can discriminate significantly between CFS-positive and CFS-negative females. Correlation of the semiquantitative methods, regardless of the diagnosis of a CFS, revealed a significant correlation-between SI and PAD, but no correlation between LSI and SI, and LSI and PAD, respectively.« less
Development of an LSI for Tactile Sensor Systems on the Whole-Body of Robots
NASA Astrophysics Data System (ADS)
Muroyama, Masanori; Makihata, Mitsutoshi; Nakano, Yoshihiro; Matsuzaki, Sakae; Yamada, Hitoshi; Yamaguchi, Ui; Nakayama, Takahiro; Nonomura, Yutaka; Fujiyoshi, Motohiro; Tanaka, Shuji; Esashi, Masayoshi
We have developed a network type tactile sensor system, which realizes high-density tactile sensors on the whole-body of nursing and communication robots. The system consists of three kinds of nodes: host, relay and sensor nodes. Roles of the sensor node are to sense forces and, to encode the sensing data and to transmit the encoded data on serial channels by interruption handling. Relay nodes and host deal with a number of the encoded sensing data from the sensor nodes. A sensor node consists of a capacitive MEMS force sensor and a signal processing/transmission LSI. In this paper, details of an LSI for the sensor node are described. We designed experimental sensor node LSI chips by a commercial 0.18µm standard CMOS process. The 0.18µm LSIs were supplied in wafer level for MEMS post-process. The LSI chip area is 2.4mm × 2.4mm, which includes logic, CF converter and memory circuits. The maximum clock frequency of the chip with a large capacitive load is 10MHz. Measured power consumption at 10MHz clock is 2.23mW. Experimental results indicate that size, response time, sensor sensitivity and power consumption are all enough for practical tactile sensor systems.
Screening and Expression of a Silicon Transporter Gene (Lsi1) in Wild-Type Indica Rice Cultivars
Abiri, Rambod; Kalhori, Nahid; Atabaki, Narges
2017-01-01
Silicon (Si) is one of the most prevalent elements in the soil. It is beneficial for plant growth and development, and it contributes to plant defense against different stresses. The Lsi1 gene encodes a Si transporter that was identified in a mutant Japonica rice variety. This gene was not identified in fourteen Malaysian rice varieties during screening. Then, a mutant version of Lsi1 was substituted for the native version in the three most common Malaysian rice varieties, MR219, MR220, and MR276, to evaluate the function of the transgene. Real-time PCR was used to explore the differential expression of Lsi1 in the three transgenic rice varieties. Silicon concentrations in the roots and leaves of transgenic plants were significantly higher than in wild-type plants. Transgenic varieties showed significant increases in the activities of the enzymes SOD, POD, APX, and CAT; photosynthesis; and chlorophyll content; however, the highest chlorophyll A and B levels were observed in transgenic MR276. Transgenic varieties have shown a stronger root and leaf structure, as well as hairier roots, compared to the wild-type plants. This suggests that Lsi1 plays a key role in rice, increasing the absorption and accumulation of Si, then alters antioxidant activities, and improves morphological properties. PMID:28191468
Klijn, Eva; Hulscher, Hester C; Balvers, Rutger K; Holland, Wim P J; Bakker, Jan; Vincent, Arnaud J P E; Dirven, Clemens M F; Ince, Can
2013-02-01
The goal of awake neurosurgery is to maximize resection of brain lesions with minimal injury to functional brain areas. Laser speckle imaging (LSI) is a noninvasive macroscopic technique with high spatial and temporal resolution used to monitor changes in capillary perfusion. In this study, the authors hypothesized that LSI can be useful as a noncontact method of functional brain mapping during awake craniotomy for tumor removal. Such a modality would be an advance in this type of neurosurgery since current practice involves the application of invasive intraoperative single-point electrocortical (electrode) stimulation and measurements. After opening the dura mater, patients were woken up, and LSI was set up to image the exposed brain area. Patients were instructed to follow a rest-activation-rest protocol in which activation consisted of the hand-clenching motor task. Subsequently, exposed brain areas were mapped for functional motor areas by using standard electrocortical stimulation (ECS). Changes in the LSI signal were analyzed offline and compared with the results of ECS. In functional motor areas of the hand mapped with ECS, cortical blood flow measured using LSI significantly increased from 2052 ± 818 AU to 2471 ± 675 AU during hand clenching, whereas capillary blood flow did not change in the control regions (areas mapped using ECS with no functional activity). The main finding of this study was that changes in laser speckle perfusion as a measure of cortical microvascular blood flow when performing a motor task with the hand relate well to the ECS map. The authors have shown the feasibility of using LSI for direct visualization of cortical microcirculatory blood flow changes during neurosurgery.
Hao, Yi-Qi; Zhao, Xin-Feng; She, Deng-Ying; Xu, Bing; Zhang, Da-Yong; Liao, Wan-Jin
2012-01-01
Reduced seed yields following self-pollination have repeatedly been observed, but the underlying mechanisms remain elusive when self-pollen tubes can readily grow into ovaries, because pre-, post-zygotic late-acting self-incompatibility (LSI), or early-acting inbreeding depression (ID) can induce self-sterility. The main objective of this study was to differentiate these processes in Aconitum kusnezoffii, a plant lacking stigmatic or stylar inhibition of self-pollination. We performed a hand-pollination experiment in a natural population of A. kusnezoffii, compared seed set among five pollination treatments, and evaluated the distribution of seed size and seed set. Embryonic development suggested fertilization following self-pollination. A partial pre-zygotic LSI was suggested to account for the reduced seed set by two lines of evidence. The seed set of chase-pollination treatment significantly exceeded that of self-pollination treatment, and the proportion of unfertilized ovules was the highest following self-pollination. Meanwhile, early-acting ID, rather than post-zygotic LSI, was suggested by the findings that the size of aborted selfed seeds varied continuously and widely; and the selfed seed set both exhibited a continuous distribution and positively correlated with the crossed seed set. These results indicated that the embryos were aborted at different stages due to the expression of many deleterious alleles throughout the genome during seed maturation. No signature of post-zygotic LSI was found. Both partial pre-zygotic LSI and early-acting ID contribute to the reduction in selfed seed set in A. kusnezoffii, with pre-zygotic LSI rejecting part of the self-pollen and early-acting ID aborting part of the self-fertilized seeds. PMID:23056570
Tijssen, Marsha; van Cingel, Robert; de Visser, Enrico; Nijhuis-van der Sanden, Maria
2016-07-01
To describe data of short- and midterm results of hip arthroscopy patients based on patient-reported hip function, hip functional performance and return to sports activities. Observational cohort study. Sports medical center. 37 recreational athletes (21 men) at least six months after finishing rehabilitation for hip arthroscopy. International Hip Outcome Tool 33 (IHOT-33), Pain Visual Analogue Scale (VAS), Global Perceived Effect Scale (GPE), sports questionnaires and hip functional performance tests. At a mean follow-up time of 2.3 years, 81% of participants reported improvement on the GPE and 84% returned to sports activities. The mean IHOT-33 score was 69.3; the mean VAS score was 35.0. Range of motion (ROM) and strength were within the 90% Limb Symmetry Index (LSI) limit, except for hip internal rotation ROM. A full recovery of hip functional performance, as measured with balance and hop tests, was established based on the 90% LSI limit. The overall short- and midterm results of these follow-up data show good recovery of hip arthroscopy patients on patient-reported outcomes, functional performance and return to sports activities. The functional performance tests used in this study seem adequate for measuring recovery in hip arthroscopy patients. Copyright © 2016 Elsevier Ltd. All rights reserved.
VizieR Online Data Catalog: Hα observations of LSI+61 303 (Zamanov+, 2013)
NASA Astrophysics Data System (ADS)
Zamanov, R.; Stoyanov, K.; Marti, J.; Tomov, N. A.; Belcheva, G.; Luque-Escamilla, P. L.; Latev, G.
2013-09-01
Optical spectroscopic observations of the Hα emission line (137 spectra obtained during the period of September 1998 - January 2013) are presented for the the radio- and gamma-ray-emitting Be/X-ray binary LSI+61 303. (2 data files).
Burmeister, David M.; Ponticorvo, Adrien; Yang, Bruce; Becerra, Sandra C.; Choi, Bernard; Durkin, Anthony J.; Christy, Robert J.
2015-01-01
Surgical intervention of second degree burns is often delayed because of the difficulty in visual diagnosis, which increases the risk of scarring and infection. Non-invasive metrics have shown promise in accurately assessing burn depth. Here, we examine the use of spatial frequency domain imaging (SFDI) and laser speckle imaging (LSI) for predicting burn depth. Contact burn wounds of increasing severity were created on the dorsum of a Yorkshire pig, and wounds were imaged with SFDI/LSI starting immediately after-burn and then daily for the next 4 days. In addition, on each day the burn wounds were biopsied for histological analysis of burn depth, defined by collagen coagulation, apoptosis, and adnexal/vascular necrosis. Histological results show that collagen coagulation progressed from day 0 to day 1, and then stabilized. Results of burn wound imaging using non-invasive techniques were able to produce metrics that correlate to different predictors of burn depth. Collagen coagulation and apoptosis correlated with SFDI scattering coefficient parameter ( μs′) and adnexal/vascular necrosis on the day of burn correlated with blood flow determined by LSI. Therefore, incorporation of SFDI scattering coefficient and blood flow determined by LSI may provide an algorithm for accurate assessment of the severity of burn wounds in real time. PMID:26138371
Ithurburn, Matthew P; Paterno, Mark V; Ford, Kevin R; Hewett, Timothy E; Schmitt, Laura C
2017-09-01
Previous work shows that young athletes after anterior cruciate ligament reconstruction (ACLR) demonstrate single-leg (SL) landing movement asymmetries at the time of return to sport (RTS); however, the effect of movement asymmetries on longitudinal knee-related function after ACLR has not been examined. Hypothesis/Purpose: The purpose of this study was to examine the effect of SL drop-landing movement symmetry at the time of RTS on knee-related function 2 years later in young athletes after ACLR. The first hypothesis was that young athletes who demonstrated SL drop-landing asymmetries at RTS would demonstrate decreased knee function 2 years later compared with those who demonstrated symmetric SL drop-landing mechanics. The second hypothesis was that SL drop-landing movement symmetry at RTS would be associated with knee functional recovery 2 years later. Cohort study; Level of evidence, 2. This study included 48 young athletes who had undergone ACLR and were assessed at the time of RTS (77% female; mean [±SD] age at RTS, 17.6 ± 2.6 years) and followed for 2 years after RTS. Three sagittal-plane landing variables of interest were calculated using 3-dimensional motion analysis during an SL drop-landing task at the time of RTS: knee flexion excursion, peak internal knee extension moment, and peak trunk flexion. The limb symmetry index (LSI) was calculated for each landing variable using the following: LSI = (involved/uninvolved) × 100%. The LSI was used to divide the cohort into symmetric (SYM) and asymmetric (ASYM) groups for each landing variable: knee flexion excursion (SYM: LSI ≥ 90% [n = 23]; ASYM: LSI < 85% [n = 18]), peak internal knee extension moment (SYM: LSI ≥ 90% [n = 19]; ASYM: LSI < 85% [n = 22]), and peak trunk flexion (SYM: LSI ≤ 105% [n = 25]; ASYM: LSI > 115% [n = 19]). At 2 years after RTS, knee-related function was evaluated using the Knee Injury and Osteoarthritis Outcome Score (KOOS), International Knee Documentation Committee (IKDC) subjective knee form, and performance on SL hop tests. Functional recovery was defined based on literature cutoffs for knee-related functional measures. Differences in 2-year function were compared between the symmetry groups using Mann-Whitney U tests because of nonnormality. Logistic regression was used to determine if landing symmetry at the time of RTS would be associated with 2-year knee functional recovery after RTS. The ASYM knee flexion excursion group demonstrated decreased function at 2 years after RTS compared with the SYM group on the KOOS-Pain (ASYM: 93.0 ± 8.2; SYM: 98.4 ± 3.0; P = .008) and the KOOS-Quality of Life (ASYM: 81.6 ± 16.1; SYM: 94.1 ± 9.7; P = .008). Knee flexion excursion was associated with knee functional recovery on the KOOS-Pain and the KOOS-Quality of Life ( P = .033 and P = .012, respectively) at 2 years after RTS, after controlling for the quadriceps strength LSI and graft type. Young athletes after ACLR with asymmetries in knee kinematics at the time of RTS reported decreased self-reported function 2 years later; however, the clinical importance of these differences needs to be further understood.
Product assurance technology for custom LSI/VLSI electronics
NASA Technical Reports Server (NTRS)
Buehler, M. G.; Blaes, B. R.; Jennings, G. A.; Moore, B. T.; Nixon, R. H.; Pina, C. A.; Sayah, H. R.; Sievers, M. W.; Stahlberg, N. F.
1985-01-01
The technology for obtaining custom integrated circuits from CMOS-bulk silicon foundries using a universal set of layout rules is presented. The technical efforts were guided by the requirement to develop a 3 micron CMOS test chip for the Combined Release and Radiation Effects Satellite (CRRES). This chip contains both analog and digital circuits. The development employed all the elements required to obtain custom circuits from silicon foundries, including circuit design, foundry interfacing, circuit test, and circuit qualification.
Accuracy of a Screening Tool for Early Identification of Language Impairment
ERIC Educational Resources Information Center
Uilenburg, Noëlle; Wiefferink, Karin; Verkerk, Paul; van Denderen, Margot; van Schie, Carla; Oudesluys-Murphy, Ann-Marie
2018-01-01
Purpose: A screening tool called the "VTO Language Screening Instrument" (VTO-LSI) was developed to enable more uniform and earlier detection of language impairment. This report, consisting of 2 retrospective studies, focuses on the effects of using the VTO-LSI compared to regular detection procedures. Method: Study 1 retrospectively…
El Bcheraoui, Charbel; Sutton, Madeline Y; Hardnett, Felicia P; Jones, Sandra B
2013-01-01
Over 1.1 million Americans are living with human immunodeficiency virus (HIV), and African-American youth and young adults are disproportionately affected. Condoms are the most effective prevention tool, yet data regarding condom use patterns for African-American college youth are lacking. To inform and strengthen HIV prevention strategies with African-American college-age youth, we surveyed students attending 24 historically Black colleges and universities regarding condom use patterns. Students were administered anonymous questionnaires online to explore knowledge, attitudes, and practices related to condom use during last sexual intercourse (LSI). Among 824 sexually active respondents (51.8% female, median age 20 years, 90.6% heterosexuals), 526 (63.8%) reported condom use during LSI. Students who used condoms for disease prevention, whose mothers completed high school or had some college education or completed college were more likely to have used a condom during LSI. Spontaneity of sexual encounters, not feeling at risk of HIV, and partner-related perceptions were associated with condom non-use during LSI (p<0.05). Over a third of our college youth sample did not use a condom during LSI and may benefit from increased condom education efforts. These efforts should highlight condoms' effectiveness in protection from HIV. Future HIV education and prevention strategies with similar groups of young adults should explore the implications of maternal education, clarify perceptions of HIV risk, and consider strategies that increase consistent condom use to interrupt sexual transmission of HIV.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Zhovtobriukh, Iurii; Besley, Nicholas A.; Fransson, Thomas
Here, the connection between specific features in the water X-ray absorption spectrum and X-ray emission spectrum (XES) and the local H-bond coordination is studied based on structures obtained from path-integral molecular dynamics simulations using either the opt-PBE-vdW density functional or the MB-pol force field. Computing the XES spectrum using all molecules in a snapshot results in only one peak in the lone-pair (1b 1) region, while the experiment shows two peaks separated by 0.8-0.9 eV. Different H-bond configurations were classified based on the local structure index (LSI) and a geometrical H-bond cone criterion. We find that tetrahedrally coordinated molecules characterizedmore » by high LSI values and two strong donated and two strong accepted H-bonds contribute to the low energy 1b 1 emission peak and to the post-edge region in absorption. Molecules with the asymmetric H-bond environment with one strong accepted H-bond and one strong donated H-bond and low LSI values give rise to the high energy 1b 1 peak in the emission spectrum and mainly contribute to the pre-edge and main-edge in the absorption spectrum. The 1b 1 peak splitting can be increased to 0.62 eV by imposing constraints on the H-bond length, i.e., for very tetrahedral structures short H-bonds (less than 2.68 Å) and for very asymmetric structures elongated H-bonds (longer than 2.8 Å). Such structures are present, but underrepresented, in the simulations which give more of an average of the two extremes.« less
Zhovtobriukh, Iurii; Besley, Nicholas A.; Fransson, Thomas; ...
2018-04-14
Here, the connection between specific features in the water X-ray absorption spectrum and X-ray emission spectrum (XES) and the local H-bond coordination is studied based on structures obtained from path-integral molecular dynamics simulations using either the opt-PBE-vdW density functional or the MB-pol force field. Computing the XES spectrum using all molecules in a snapshot results in only one peak in the lone-pair (1b 1) region, while the experiment shows two peaks separated by 0.8-0.9 eV. Different H-bond configurations were classified based on the local structure index (LSI) and a geometrical H-bond cone criterion. We find that tetrahedrally coordinated molecules characterizedmore » by high LSI values and two strong donated and two strong accepted H-bonds contribute to the low energy 1b 1 emission peak and to the post-edge region in absorption. Molecules with the asymmetric H-bond environment with one strong accepted H-bond and one strong donated H-bond and low LSI values give rise to the high energy 1b 1 peak in the emission spectrum and mainly contribute to the pre-edge and main-edge in the absorption spectrum. The 1b 1 peak splitting can be increased to 0.62 eV by imposing constraints on the H-bond length, i.e., for very tetrahedral structures short H-bonds (less than 2.68 Å) and for very asymmetric structures elongated H-bonds (longer than 2.8 Å). Such structures are present, but underrepresented, in the simulations which give more of an average of the two extremes.« less
Gomez-Huelgas, R; Jansen-Chaparro, S; Baca-Osorio, A J; Mancera-Romero, J; Tinahones, F J; Bernal-López, M R
2015-06-01
The impact of a lifestyle intervention (LSI) program for the long-term management of subjects with metabolic syndrome in a primary care setting is not known. This 3-year prospective controlled trial randomized adult subjects with metabolic syndrome to receive intensive LSI or to usual care in a community health centre in Malaga, Spain. LSI subjects received instruction on Mediterranean diet and a regular aerobic exercise program by their primary care professionals. Primary outcome included changes from baseline on different components of metabolic syndrome (abdominal circumference, blood pressure, HDL-cholesterol, fasting plasma glucose and triglycerides). Among the 2,492 subjects screened, 601 subjects with metabolic syndrome (24.1%) were randomized to LSI (n = 298) or to usual care (n = 303); of them, a 77% and a 58%, respectively, completed the study. At the end of the study period, LSI resulted in significant differences vs. usual care in abdominal circumference (-0.4 ± 6 cm vs. + 2.1 ± 6.7 cm, p < 0.001), systolic blood pressure (-5.5 ± 15 mmHg vs. -0.6 ± 19 mmHg, p = 0.004), diastolic blood pressure (-4.6 ± 10 mmHg vs. -0.2 ± 13 mmHg, p < 0.001) and HDL-cholesterol (+4 ± 12 mg/dL vs. + 2 ± 12 mg/dL, p = 0.05); however, there were no differences in fasting plasma glucose and triglyceride concentration (-4 ± 35 mg/dl vs. -1 ± 32 mg/dl, p = 0.43 and -0.4 ± 83 mg/dl vs. +6 ± 113 mg/dl, p = 0.28). Intensive LSI counseling provided by primary care professionals resulted in significant improvements in abdominal circumference, blood pressure and HDL-cholesterol but had limited effects on glucose and triglyceride levels in patients with metabolic syndrome. Copyright © 2015 European Federation of Internal Medicine. Published by Elsevier B.V. All rights reserved.
A Coherent VLSI Design Environment
1987-12-31
contract the total research volume in VLSI rose from an estimated $3,000,000 to over 3 $10,000,000, and a state-of-the-art VLSI fabrication facility costing...Research" 11:30 John Melngailic , "Submicron Structures Research at M.I.T." 11:55 Dimitri A. Antoniadis, "Status of the M.I.T. LSI Fabrication Facility ...1984. Contributions were made by Prof. Antoniadis and, to a small degree, Pro£ Glasser. Objective: • To develop techniques for fabricating integrated
Federal Register 2010, 2011, 2012, 2013, 2014
2012-04-04
...: (1) there is inadequate lead time to permit the development of the necessary technology giving... with section 209(e)(1) of the Clean Air Act, California's LSI regulations must not affect new farming... Act if there is inadequate lead-time to permit the development of technology necessary to meet those...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-05-22
... franchise fee payable to the Government that is based upon consideration of the probable value to the... depreciation. Thus, if we use the standard LSI formula to establish the required minimum franchise fee for the... franchise fee that we would establish under the standard LSI formula, this business decision relies on...
Periodicities in the high-mass X-ray binary system RXJ0146.9+6121/LSI+61°235
NASA Astrophysics Data System (ADS)
Sarty, Gordon E.; Kiss, László L.; Huziak, Richard; Catalan, Lionel J. J.; Luciuk, Diane; Crawford, Timothy R.; Lane, David J.; Pickard, Roger D.; Grzybowski, Thomas A.; Closas, Pere; Johnston, Helen; Balam, David; Wu, Kinwah
2009-01-01
The high-mass X-ray binary RXJ0146.9+6121, with optical counterpart LSI+61°235 (V831Cas), is an intriguing system on the outskirts of the open cluster NGC663. It contains the slowest Be type X-ray pulsar known with a pulse period of around 1400s and, primarily from the study of variation in the emission line profile of Hα, it is known to have a Be decretion disc with a one-armed density wave period of approximately 1240d. Here we present the results of an extensive photometric campaign, supplemented with optical spectroscopy, aimed at measuring short time-scale periodicities. We find three significant periodicities in the photometric data at, in order of statistical significance, 0.34, 0.67 and 0.10d. We give arguments to support the interpretation that the 0.34 and 0.10d periods could be due to stellar oscillations of the B-type primary star and that the 0.67d period is the spin period of the Be star with a spin axis inclination of 23+10-8 degrees. We measured a systemic velocity of -37.0 +/- 4.3kms-1 confirming that LSI+61°235 has a high probability of membership in the young cluster NGC663 from which the system's age can be estimated as 20-25Myr. From archival RXTE All Sky Monitor (ASM) data we further find `super' X-ray outbursts roughly every 450d. If these super outbursts are caused by the alignment of the compact star with the one-armed decretion disc enhancement, then the orbital period is approximately 330d.
Sensitivity of subject-specific models to errors in musculo-skeletal geometry.
Carbone, V; van der Krogt, M M; Koopman, H F J M; Verdonschot, N
2012-09-21
Subject-specific musculo-skeletal models of the lower extremity are an important tool for investigating various biomechanical problems, for instance the results of surgery such as joint replacements and tendon transfers. The aim of this study was to assess the potential effects of errors in musculo-skeletal geometry on subject-specific model results. We performed an extensive sensitivity analysis to quantify the effect of the perturbation of origin, insertion and via points of each of the 56 musculo-tendon parts contained in the model. We used two metrics, namely a Local Sensitivity Index (LSI) and an Overall Sensitivity Index (OSI), to distinguish the effect of the perturbation on the predicted force produced by only the perturbed musculo-tendon parts and by all the remaining musculo-tendon parts, respectively, during a simulated gait cycle. Results indicated that, for each musculo-tendon part, only two points show a significant sensitivity: its origin, or pseudo-origin, point and its insertion, or pseudo-insertion, point. The most sensitive points belong to those musculo-tendon parts that act as prime movers in the walking movement (insertion point of the Achilles Tendon: LSI=15.56%, OSI=7.17%; origin points of the Rectus Femoris: LSI=13.89%, OSI=2.44%) and as hip stabilizers (insertion points of the Gluteus Medius Anterior: LSI=17.92%, OSI=2.79%; insertion point of the Gluteus Minimus: LSI=21.71%, OSI=2.41%). The proposed priority list provides quantitative information to improve the predictive accuracy of subject-specific musculo-skeletal models. Copyright © 2012 Elsevier Ltd. All rights reserved.
The CEOS constellation for land surface imaging
Bailey, G.B.; Berger, Marsha; Jeanjean, H.; Gallo, K.P.
2007-01-01
A constellation of satellites that routinely and frequently images the Earth's land surface in consistently calibrated wavelengths from the visible through the microwave and in spatial detail that ranges from sub-meter to hundreds of meters would offer enormous potential benefits to society. A well-designed and effectively operated land surface imaging satellite constellation could have great positive impact not only on the quality of life for citizens of all nations, but also on mankind's very ability to sustain life as we know it on this planet long into the future. The primary objective of the Committee on Earth Observation Satellites (CEOS) Land Surface Imaging (LSI) Constellation is to define standards (or guidelines) that describe optimal future LSI Constellation capabilities, characteristics, and practices. Standards defined for a LSI Constellation will be based on a thorough understanding of user requirements, and they will address at least three fundamental areas of the systems comprising a Land Surface Imaging Constellation: the space segments, the ground segments, and relevant policies and plans. Studies conducted by the LSI Constellation Study Team also will address current and shorter-term problems and issues facing the land remote sensing community today, such as seeking ways to work more cooperatively in the operation of existing land surface imaging systems and helping to accomplish tangible benefits to society through application of land surface image data acquired by existing systems. 2007 LSI Constellation studies are designed to establish initial international agreements, develop preliminary standards for a mid-resolution land surface imaging constellation, and contribute data to a global forest assessment.
C-MOS bulk metal design handbook. [LSI standard cell (circuits)
NASA Technical Reports Server (NTRS)
Edge, T. M.
1977-01-01
The LSI standard cell array technique was used in the fabrication of more than 20 CMOS custom arrays. This technique consists of a series of computer programs and design automation techniques referred to as the Computer Aided Design And Test (CADAT) system that automatically translate a partitioned logic diagram into a set of instructions for driving an automatic plotter which generates precision mask artwork for complex LSI arrays of CMOS standard cells. The standard cell concept for producing LSI arrays begins with the design, layout, and validation of a group of custom circuits called standard cells. Once validated, these cells are given identification or pattern numbers and are permanently stored. To use one of these cells in a logic design, the user calls for the desired cell by pattern number. The Place, Route in Two Dimension (PR2D) computer program is then used to automatically generate the metalization and/or tunnels to interconnect the standard cells into the required function. Data sheets that describe the function, artwork, and performance of each of the standard cells, the general procedure for implementation of logic in CMOS standard cells, and additional detailed design information are presented.
Heterogeneous integration of low-temperature metal-oxide TFTs
NASA Astrophysics Data System (ADS)
Schuette, Michael L.; Green, Andrew J.; Leedy, Kevin D.; McCandless, Jonathan P.; Jessen, Gregg H.
2017-02-01
The breadth of circuit fabrication opportunities enabled by metal-oxide thin-film transistors (MO-TFTs) is unprecedented. Large-area deposition techniques and high electron mobility are behind their adoption in the display industry, and substrate agnosticism and low process temperatures enabled the present wave of flexible electronics research. Reports of circuits involving complementaryMO-TFTs, oxide-organic hybrid combinations, and even MO-TFTs integrated onto Si LSI back end of line interconnects demonstrate this technology's utility in 2D and 3D monolithic heterogeneous integration (HI). In addition to a brief literature review focused on functional HI between MO-TFTs and a variety of dissimilar active devices, we share progress toward integrating MO-TFTs with compound semiconductor devices, namely GaN HEMTs. A monolithically integrated cascode topology was used to couple a HEMT's >200 V breakdown characteristic with the gate driving characteristic of an IGZO TFT, effectively shifting the HEMT threshold voltage from -3 V to +1 V.
Custom LSI plus hybrid equals cost effectiveness
NASA Astrophysics Data System (ADS)
Friedman, S. N.
The possibility to combine various technologies, such as Bi-Polar linear and CMOS/Digital makes it feasible to create systems with a tailored performance not available on a single monolithic circuit. The custom LSI 'BLOCK', especially if it is universal in nature, is proving to be a cost effective way for the developer to improve his product. The custom LSI represents a low price part in contrast to the discrete components it will replace. In addition, the hybrid assembly can realize a savings in labor as a result of the reduced parts handling and associated wire bonds. The possibility of the use of automated system manufacturing techniques leads to greater reliability as the human factor is partly eliminated. Attention is given to reliability predictions, cost considerations, and a product comparison study.
Chen, Hongyu; Martin, Bronwen; Daimon, Caitlin M; Maudsley, Stuart
2013-01-01
Text mining is rapidly becoming an essential technique for the annotation and analysis of large biological data sets. Biomedical literature currently increases at a rate of several thousand papers per week, making automated information retrieval methods the only feasible method of managing this expanding corpus. With the increasing prevalence of open-access journals and constant growth of publicly-available repositories of biomedical literature, literature mining has become much more effective with respect to the extraction of biomedically-relevant data. In recent years, text mining of popular databases such as MEDLINE has evolved from basic term-searches to more sophisticated natural language processing techniques, indexing and retrieval methods, structural analysis and integration of literature with associated metadata. In this review, we will focus on Latent Semantic Indexing (LSI), a computational linguistics technique increasingly used for a variety of biological purposes. It is noted for its ability to consistently outperform benchmark Boolean text searches and co-occurrence models at information retrieval and its power to extract indirect relationships within a data set. LSI has been used successfully to formulate new hypotheses, generate novel connections from existing data, and validate empirical data.
FPGA Implementation of Metastability-Based True Random Number Generator
NASA Astrophysics Data System (ADS)
Hata, Hisashi; Ichikawa, Shuichi
True random number generators (TRNGs) are important as a basis for computer security. Though there are some TRNGs composed of analog circuit, the use of digital circuits is desired for the application of TRNGs to logic LSIs. Some of the digital TRNGs utilize jitter in free-running ring oscillators as a source of entropy, which consume large power. Another type of TRNG exploits the metastability of a latch to generate entropy. Although this kind of TRNG has been mostly implemented with full-custom LSI technology, this study presents an implementation based on common FPGA technology. Our TRNG is comprised of logic gates only, and can be integrated in any kind of logic LSI. The RS latch in our TRNG is implemented as a hard-macro to guarantee the quality of randomness by minimizing the signal skew and load imbalance of internal nodes. To improve the quality and throughput, the output of 64-256 latches are XOR'ed. The derived design was verified on a Xilinx Virtex-4 FPGA (XC4VFX20), and passed NIST statistical test suite without post-processing. Our TRNG with 256 latches occupies 580 slices, while achieving 12.5Mbps throughput.
Moya-Angeler, Joaquín; Vaquero, Javier; Forriol, Francisco
2017-06-01
The purpose of this study was to evaluate the functional status prior to and at different times after anterior cruciate ligament reconstruction (ACLR), and to analyze the changes in the kinetic patterns of the involved and uninvolved lower limb during gait, sprint and three hop tests. Seventy-four male patients with an ACL injury were included in the study. All patients performed a standardized kinetic protocol including gait, sprint and three hop tests (single-leg hop, drop vertical jump and vertical jump tests), preoperatively and at 3, 6, and 12 months after ACLR with a semitendinosus gracilis tendon autograft. Measurements were performed with two force plates. The lower limb symmetry index (LSI) was calculated to determine whether a side-to-side leg difference was classified as normal (LSI >90%) or abnormal (LSI <90%). The LSI presented high values (>90%) at almost all times before and after ACLR in gait, sprint and single-leg hop tests (p < 0.005), with a tendency to increase postoperatively. A lower LSI was observed (<90%) in tests where both extremities were tested simultaneously, such as the drop vertical jump and vertical hop tests (p < 0.05). We observed a tendency to increase symmetry restoration in the kinetics of the involved and uninvolved limb up to twelve months after ACLR, especially in those tests, in which, both limbs were tested individually (gait analysis, sprint and single-leg hop tests). Therefore, the isolation of the involved and uninvolved limb seems to be a critical component in the functional rehabilitation and evaluation of patients before and after ACLR. level III.
NASA Astrophysics Data System (ADS)
Morishita, Tetsuya
2012-07-01
We report a first-principles molecular-dynamics study of the relaxation dynamics in liquid silicon (l-Si) over a wide temperature range (1000-2200 K). We find that the intermediate scattering function for l-Si exhibits a compressed exponential decay above 1200 K including the supercooled regime, which is in stark contrast to that for normal "dense" liquids which typically show stretched exponential decay in the supercooled regime. The coexistence of particles having ballistic-like motion and those having diffusive-like motion is demonstrated, which accounts for the compressed exponential decay in l-Si. An attempt to elucidate the crossover from the ballistic to the diffusive regime in the "time-dependent" diffusion coefficient is made and the temperature-independent universal feature of the crossover is disclosed.
A natural command language for C/3/I applications
NASA Astrophysics Data System (ADS)
Mergler, J. P.
1980-03-01
The article discusses the development of a natural command language and a control and analysis console designed to simplify the task of the operator in field of Command, Control, Communications, and Intelligence. The console is based on a DEC LSI-11 microcomputer, supported by 16-K words of memory and a serial interface component. Discussion covers the language, which utilizes English and a natural syntax, and how it is integrated with the hardware. It is concluded that results have demonstrated the effectiveness of this natural command language.
Lee, Ji-Hyun; Cynn, Heon-Seock; Choi, Woo-Jeong; Jeong, Hyo-Jung; Yoon, Tae-Lim
2016-05-01
The objective of this study was to introduce levator scapulae (LS) measurement using a caliper and the levator scapulae index (LSI) and to investigate intra- and interrater reliability of the LSI in subjects with and without scapular downward rotation syndrome (SDRS). Two raters measured LS length twice in 38 subjects (19 with SDRS and 19 without SDRS). For reliability testing, intraclass correlation coefficients (ICCs), standard error of measurement (SEM), and minimal detectable change (MDC) were calculated. Intrarater reliability analysis resulted with ICCs ranging from 0.94 to 0.98 in subjects with SDRS and 0.96 to 0.98 in subjects without SDRS. These results represented that intrarater reliability in both groups were excellent for measuring LS length with the LSI. Interrater reliability was good (ICC: 0.82) in subjects with SDRS; however, interrater reliability was moderate (ICC: 0.75) in subjects without SDRS. Additionally, SEM and MDC were 0.13% and 0.36% in subjects with SDRS and 0.35% and 0.97% in subjects without SDRS. In subjects with SDRS, low dispersion of the measurement errors and MDC were shown. This study suggested that the LSI is a reliable method to measure LS length and is more reliable for subjects with SDRS. Copyright © 2015 Elsevier Ltd. All rights reserved.
Jeong, Hyo-Jung; Cynn, Heon-Seock; Yi, Chung-Hwi; Yoon, Jang-Whon; Lee, Ji-Hyun; Yoon, Tae-Lim; Kim, Bo-Been
2017-07-01
Levator scapulae (LS) muscle stretching exercises are a common method of lengthening a shortened muscle; however, the appropriate stretching position for lengthening the LS in people with a shortened LS remains unclear. The purpose of this study was to compare the effects of different stretching exercise positions on the LS and introduce effective stretching exercise methods to clinicians. Twenty-four university students (12 men, 12 women) with a shortened LS were recruited. LS muscle activity, LS index (LSI), and cervical range of motion (ROM) were measured pre (baseline) and post three different stretching exercise positions (sitting, quadruped, and prone). The LSI and cervical ROM exceeded the minimal detectable change and had significant changes. The LSI was greater in the sitting position than at the baseline (p = 0.01), quadruped position (p < 0.01); the LSI in the prone position presented a higher increase than the quadruped position (p = 0.01). The cervical ROM increased in the sitting position when compared to the baseline (p < 0.01) and quadruped position (p < 0.01). Stretching the LS in the sitting position was the most effective exercise for improving LS muscle length and cervical ROM. Copyright © 2017 Elsevier Ltd. All rights reserved.
BiCMOS circuit technology for a 704 MHz ATM switch LSI
NASA Astrophysics Data System (ADS)
Ohtomo, Yusuke; Yasuda, Sadayuki; Togashi, Minoru; Ino, Masayuki; Tanabe, Yasuyuki; Inoue, Jun-Ichi; Nogawa, Masafumi; Hino, Shigeki
1994-05-01
This paper describes BiCMOS level-converter circuits and clock circuits that increase VLSI interface speed to 1 GHz, and their application to a 704 MHz ATM switch LSI. An LSI with high speed interface requires a BiCMOS multiplexer/demultiplexer (MUX/DEMUX) on the chip to reduce internal operation speed. A MUX/DEMUX with minimum power dissipation and a minimum pattern area can be designed using the proposed converter circuits. The converter circuits, using weakly cross-coupled CMOS inverters and a voltage regulator circuit, can convert signal levels between LCML and positive CMOS at a speed of 500 MHz. Data synchronization in the high speed region is ensured by a new BiCMOS clock circuit consisting of a pure ECL path and retiming circuits. The clock circuit reduces the chip latency fluctuation of the clock signal and absorbs the delay difference between the ECL clock and data through the CMOS circuits. A rerouting-Banyan (RRB) ATM switch, employing both the proposed converter circuits and the clock circuits, has been fabricated with 0.5 micron BiCMOS technology. The LSI, composed of CMOS 15 K gate LOGIC, 8 Kb RAM, 1 Kb FIFO and ECL 1.6 K gate LOGIC, achieved an operation speed of 704-MHz with power dissipation of 7.2 W.
Thomas, Stuart D M; Daffern, Michael; Martin, Trish; Ogloff, James R P; Thomson, Lindsay D G; Ferguson, Murray
2009-02-01
Despite seclusion being described as one of the most ethically- and legally-controversial management options available, it remains a widely-used clinical strategy for managing disruptive, aggressive, and violent behaviour. This study sought to determine how frequently seclusion was used, the common characteristics of those secluded and not secluded, and the degree to which the Level of Service Inventory - Revised: Screening Version (LSI-R: SV) could predict seclusion. The study was retrospective, covering the first 2 years of operation of a statewide forensic psychiatry hospital in Victoria, Australia. Data were collected from individual case files, electronic databases, and paper copies of records pertaining to violent incidents and episodes of seclusion. Eighty five (44%) of the 193 patients admitted during this period were secluded. Those secluded were significantly younger and had a more established psychiatric history. LSI-R: SV scores were significantly and positively associated with being secluded. A statistical model containing three LSI-R: SV items, along with age on admission and psychiatric history, achieved an area under the curve of 0.74. Seclusion is used on a regular basis in response to a range of different forms of aggressive behaviour of different severity. The LSI-R: SV demonstrated moderate-to-good accuracy in predicting seclusion and warrants further research using detailed prospective methodologies.
Proton upsets in LSI memories in space
NASA Technical Reports Server (NTRS)
Mcnulty, P. J.; Wyatt, R. C.; Filz, R. C.; Rothwell, P. L.; Farrell, G. E.
1980-01-01
Two types of large scale integrated dynamic random access memory devices were tested and found to be subject to soft errors when exposed to protons incident at energies between 18 and 130 MeV. These errors are shown to differ significantly from those induced in the same devices by alphas from an Am-241 source. There is considerable variation among devices in their sensitivity to proton-induced soft errors, even among devices of the same type. For protons incident at 130 MeV, the soft error cross sections measured in these experiments varied from 10 to the -8th to 10 to the -6th sq cm/proton. For individual devices, however, the soft error cross section consistently increased with beam energy from 18-130 MeV. Analysis indicates that the soft errors induced by energetic protons result from spallation interactions between the incident protons and the nuclei of the atoms comprising the device. Because energetic protons are the most numerous of both the galactic and solar cosmic rays and form the inner radiation belt, proton-induced soft errors have potentially serious implications for many electronic systems flown in space.
Distributed EDLSI, BM25, and Power Norm at TREC 2008
2008-11-01
LSI would work on the IIT Complex Document Information Processing (IIT CDIP ) test collection, which contains approximately 7 million documents (57 GB...requirements, specifically the memory, for EDLSI are reduced over LSI, they are still significant, especially for a corpus the size of IIT CDIP . After...data, for training purposes. Initially we ran the 2006 and 2007 queries against the IIT CDIP corpus and developed a pseudo submis- sion file containing
Distributed Sensor Systems and Electromechanical Analog Facility
1980-01-01
interfaces (parallel I/O, modems , etc.) real time operating systems (perhaps a short survey of what is available in the industry today), data...consists of a LSI-11 microprocessor, 56K bytes of memory, and serial and parallel I/O boards. 2.1.7 Disk controller The standard disk controller...with MTS via the modems connected to the LSI-lls. This pseudodevice cannot be reassigned. OSWIT I/O AND INTERRUPT STRUCTURE 137 OSWIT
MIL-STD-1553B Marconi LSI chip set in a remote terminal application
NASA Astrophysics Data System (ADS)
Dimarino, A.
1982-11-01
Marconi Avionics is utilizing the MIL-STD-1553B LSI Chip Set in the SCADC Air Data Computer application to perform all of the required remote terminal MIL-STD-1553B protocol functions. Basic components of the RTU are the dual redundant chip set, CT3231 Transceivers, 256 x 16 RAM and a Z8002 microprocessor. Basic transfers are to/from the RAM command of the bus controller or Z8002 processor. During transfers from the processor to the RAM, the chip set busy bit is set for a period not exceeding 250 microseconds. When the transfer is complete, the busy bit is released and transfers to the data bus occur on command. The LSI Chip Set word count lines are used to locate each data word in the local memory and 4 mode codes are used in the application: reset remote terminal, transmit status word, transmitter shut-down, and override transmitter shutdown.
Suo, An-ning; Wang, Tian-ming; Wang, Hui; Yu, Bo; Ge, Jian-ping
2006-12-01
Non-point sources pollution is one of main pollution modes which pollutes the earth surface environment. Aimed at soil water loss (a typical non-point sources pollution problem) on the Losses Plateau in China, the paper applied a landscape patternevaluation method to twelve watersheds of Jinghe River Basin on the Loess Plateau by means of location-weighted landscape contrast index(LCI) and landscape slope index(LSI). The result showed that LSI of farm land, low density grass land, forest land and LCI responded significantly to soil erosion modulus and responded to depth of runoff, while the relationship between these landscape index and runoff variation index and erosion variation index were not statistically significant. This tell us LSI and LWLCI are good indicators of soil water loss and thus have big potential in non-point source pollution risk evaluation.
LSI/VLSI design for testability analysis and general approach
NASA Technical Reports Server (NTRS)
Lam, A. Y.
1982-01-01
The incorporation of testability characteristics into large scale digital design is not only necessary for, but also pertinent to effective device testing and enhancement of device reliability. There are at least three major DFT techniques, namely, the self checking, the LSSD, and the partitioning techniques, each of which can be incorporated into a logic design to achieve a specific set of testability and reliability requirements. Detailed analysis of the design theory, implementation, fault coverage, hardware requirements, application limitations, etc., of each of these techniques are also presented.
Radiation evaluation study of LSI RAM technologies
NASA Astrophysics Data System (ADS)
Dinger, G. L.; Knoll, M. G.
1980-01-01
Five commercial LSI static random access memory technologies having a 1 kilobit capacity were radiation characterized. Arrays from the transistor-transistor-logic (TTL), Schottky TTL, n-channel metal oxide semiconductor, complementary metal oxide semiconductor (CMOS), and CMOS/silicon on sapphire families were evaluated. Radiation failure thresholds for gamma doserate logic upset, total gamma dose survivability, and neutron fluence survivability were determined. A brief analysis of the radiation failure mechanism for each of the logic families tested is included.
Design, processing and testing of LSI arrays: Hybrid microelectronics task
NASA Technical Reports Server (NTRS)
Himmel, R. P.; Stuhlbarg, S. M.; Ravetti, R. G.; Zulueta, P. J.
1979-01-01
Mathematical cost factors were generated for both hybrid microcircuit and printed wiring board packaging methods. A mathematical cost model was created for analysis of microcircuit fabrication costs. The costing factors were refined and reduced to formulae for computerization. Efficient methods were investigated for low cost packaging of LSI devices as a function of density and reliability. Technical problem areas such as wafer bumping, inner/outer leading bonding, testing on tape, and tape processing, were investigated.
Familial 18 centromere variant resulting in difficulties in interpreting prenatal interphase FISH.
Bourthoumieu, S; Esclaire, F; Terro, F; Brosset, P; Fiorenza, M; Aubard, V; Beguet, M; Yardin, C
2010-08-01
We report here on a familial case of centromeric heteromorphism of chromosome 18 detected by prenatal interphase fluorescence in situ hybridization (FISH) analysis transmitted by the mother to her fetus, and resulting in complete loss of one 18 signal. The prenatal diagnosis was performed by interphase FISH (AneuVysion probe set, and LSI DiGeorge 22q11.2 kit) because of the presence of an isolated fetal cardiac abnormality, and was first difficult to interpret: only one centromeric 18 signal was detectable on prenatal interphase nuclei, along with one signal for the Y and one for the X chromosome. The LSI DiGeorge 22q11.2 kit also showed the absence of one TUPLE 1 signal on all examined nuclei. In fact, the FISH performed on maternal buccal smear displayed the same absence of one chromosome 18 centromeric signal, combined with the presence of two TUPLE1 signals. All these results led to the diagnosis of an isolated 22q11.2 fetal microdeletion that was confirmed on metaphases spreads. This case illustrates once again that the locus specific (LSI) probes are more effective than the alpha centromeric probes for interphase analysis. The development of high-quality LSI probes for chromosomes 18, X and Y could avoid the misinterpretation of prenatal interphase FISH leading to numerous additional and expensive investigations. Copyright 2010 Elsevier Masson SAS. All rights reserved.
Liu, Weihua; Yang, Yi; Xu, Haitao; Liu, Xiaoyan; Wang, Yijia; Liang, Zhicheng
2014-01-01
In mass customization logistics service, reasonable scheduling of the logistics service supply chain (LSSC), especially time scheduling, is benefit to increase its competitiveness. Therefore, the effect of a customer order decoupling point (CODP) on the time scheduling performance should be considered. To minimize the total order operation cost of the LSSC, minimize the difference between the expected and actual time of completing the service orders, and maximize the satisfaction of functional logistics service providers, this study establishes an LSSC time scheduling model based on the CODP. Matlab 7.8 software is used in the numerical analysis for a specific example. Results show that the order completion time of the LSSC can be delayed or be ahead of schedule but cannot be infinitely advanced or infinitely delayed. Obtaining the optimal comprehensive performance can be effective if the expected order completion time is appropriately delayed. The increase in supply chain comprehensive performance caused by the increase in the relationship coefficient of logistics service integrator (LSI) is limited. The relative concern degree of LSI on cost and service delivery punctuality leads to not only changes in CODP but also to those in the scheduling performance of the LSSC.
Yang, Yi; Xu, Haitao; Liu, Xiaoyan; Wang, Yijia; Liang, Zhicheng
2014-01-01
In mass customization logistics service, reasonable scheduling of the logistics service supply chain (LSSC), especially time scheduling, is benefit to increase its competitiveness. Therefore, the effect of a customer order decoupling point (CODP) on the time scheduling performance should be considered. To minimize the total order operation cost of the LSSC, minimize the difference between the expected and actual time of completing the service orders, and maximize the satisfaction of functional logistics service providers, this study establishes an LSSC time scheduling model based on the CODP. Matlab 7.8 software is used in the numerical analysis for a specific example. Results show that the order completion time of the LSSC can be delayed or be ahead of schedule but cannot be infinitely advanced or infinitely delayed. Obtaining the optimal comprehensive performance can be effective if the expected order completion time is appropriately delayed. The increase in supply chain comprehensive performance caused by the increase in the relationship coefficient of logistics service integrator (LSI) is limited. The relative concern degree of LSI on cost and service delivery punctuality leads to not only changes in CODP but also to those in the scheduling performance of the LSSC. PMID:24715818
Ratigan, Amanda; Kritz-Silverstein, Donna; Barrett-Connor, Elizabeth
2016-07-01
This study examines the cross-sectional associations of cognitive and physical function with life satisfaction in middle-class, community-dwelling adults aged 60 and older. Participants were 632 women and 410 men who had cognitive function tests (CFT) and physical function tasks (PFT) assessed at a clinic visit between 1988 and 1992, and who responded in 1992 to a mailed survey that included life satisfaction measures. Cognitive impairment was defined as ≤24 on MMSE, ≥132 on Trails B, ≤12 on Category Fluency, ≤13 on Buschke long-term recall, and ≤7 on Heaton immediate recall. Physical impairment was defined as participants' self-reported difficulty (yes/no) in performing 10 physical functions. Multiple linear regression examined associations between life satisfaction and impairment on ≥1 CFT or difficulty with ≥1 PFT. The Satisfaction with Life Scale (SWLS; range:0-26) and Life Satisfaction Index-Z (LSI-Z; range:5-35). Participants' average age was 73.4 years (range=60-94). Categorically defined cognitive impairment was present in 40% of men and 47% of women. Additionally, 30% of men and 43% of women reported difficulty performing any PFT. Adjusting for age and impairment on ≥1 CFT, difficulty performing ≥1 PFT was associated with lower LSI-Z and SWLS scores in men (β=-1.73, -1.26, respectively, p<0.05) and women (β=-1.79, -1.93, respectively, p<0.01). However, impairment on ≥ 1 CFT was not associated with LSI-Z or SWLS score after adjusting for age and difficulty with ≥1 PFT. Limited cognitive function was more common than limited physical function; however, limited physical function was more predictive of lower life satisfaction. Interventions to increase or maintain mobility among older adults may improve overall life satisfaction. Copyright © 2016. Published by Elsevier Ireland Ltd.
NASA Astrophysics Data System (ADS)
Licht, Otavio Augusto Boni
2018-04-01
The statistical analysis of a lithogeochemical database from whole Paraná Igneous Province (PIP), containing 5974 outcrop and drillhole samples, stresses natural gaps separating SiO2, Zr, TiO2 and P2O5 in high and low values. Their combination delimits 16 chemical types, which have been adopted to classify a sub-set of extrusive rocks with < 2% LOI, comprising 3296 samples. The SiO2 × Zr diagram, where only extrusive rock samples were plotted, shows two major trends connecting low silica (LSi) with high silica (HSi) types. The set formed by Type 4 (LSi-LZr-HTi-HP) + Type 3 (LSi-LZr-HTi-LP) + Type 2 (LSi-LZr-LTi-HP) outcrop samples constitutes a continuous strip that contours the North-Central portion of the Paraná Igneous Province - PIP, subdividing the Type 1 (LSi-LZr-LTi-LP) into Type 1 (Southern) and Type 1 (Central-Northern). The rocks of Type 9 (HSi-LZr-LTi-LP) are mainly exposed in the Central-Southern region and the Zr contents divide them into Type 9 (Central-Southern) < 303 ppm Zr and Type 9 (South-East) ≥ 303 ppm Zr. Both Type 13 (HSi-HZr-LTi-LP) and Type 14 (HSi-HZr-LTi-HP) are exposed on the eastern rim of the PIP. Types are characterized and correlated by typical major and minor elemental associations as well as specific geographical locations throughout the province, composing a robust 3-D model. The combination of maps, cross-sections and 40Ar/39Ar and U/Pb ages found in the literature resulted in a 4-D model (spatial and temporal) for the province. Thus, it is proposed to subdivide the PIP into Southern Sub-province and Central-Northern Sub-province, each one with its own evolution, based on the chemo- and chrono-stratigraphy of its volcanic sequence.
Enhanced heterotetrameric assembly of potato ADP-glucose pyrophosphorylase using reverse genetics.
Seferoglu, A Bengisu; Koper, Kaan; Can, F Betul; Cevahir, Gul; Kavakli, I Halil
2014-08-01
ADP-glucose pyrophosphorylase (AGPase) is a key allosteric enzyme in plant starch biosynthesis. Plant AGPase is a heterotetrameric enzyme that consists of large (LS) and small subunits (SS), which are encoded by two different genes. Computational and experimental studies have revealed that the heterotetrameric assembly of AGPase is thermodynamically weak. Modeling studies followed by the mutagenesis of the LS of the potato AGPase identified a heterotetramer-deficient mutant, LS(R88A). To enhance heterotetrameric assembly, LS(R88A) cDNA was subjected to error-prone PCR, and second-site revertants were identified according to their ability to restore glycogen accumulation, as assessed with iodine staining. Selected mutations were introduced into the wild-type (WT) LS and co-expressed with the WT SS in Escherichia coli glgC(-). The biochemical characterization of revertants revealed that LS(I90V)SS(WT), LS(Y378C)SS(WT) and LS(D410G)SS(WT) mutants displayed enhanced heterotetrameric assembly with the WT SS. Among these mutants, LS(Y378C)SS(WT) AGPase displayed increased heat stability compared with the WT enzyme. Kinetic characterization of the mutants indicated that the LS(I90V)SS(WT) and LS(Y378C)SS(WT) AGPases have comparable allosteric and kinetic properties. However, the LS(D410G)SS(WT) mutant exhibited altered allosteric properties of being less responsive and more sensitive to 3-phosphoglyceric acid activation and inorganic phosphate inhibition. This study not only enhances our understanding of the interaction between the SS and the LS of AGPase but also enables protein engineering to obtain enhanced assembled heat-stable variants of AGPase, which can be used for the improvement of plant yields. © The Author 2014. Published by Oxford University Press on behalf of Japanese Society of Plant Physiologists. All rights reserved. For permissions, please email: journals.permissions@oup.com.
SEM Analysis Techniques for LSI Microcircuits. Volume 2
1980-08-01
4~, 1 v’ ’ RADC-TR80-250, Vol 11 (of two), Final Technical -Report, Augut1980 SEM, ANALYSIS TECHNIQUES, FOR LSI MICROCIRCUITS: ’Martin...Bit Static ’RAM.. Volume II - 1024 Bit Stat’i RAM, 4096 Bit Dynamic RAM (SiGATE WOS,)., 4096 Bit -Dynamic RAM ( 1 2 L Bipolar)., ,Summary. RADC-TR-80-250...States, ithout.irst obtani an export nse, is a violation t Internatio 1 Tr ffic in A . eguiations. Such violation is subject o penalty of to 2 years impr
2014-09-08
used SFDI and LSI to investigate controlled burn wounds of graded severity in a Yorkshire pig model. Burn wounds were imaged starting at one hour...10–15 (1992). 39. M. Chvapil, D. P. Speer, J. A. Owen, and T. A. Chvapil, “Identification of the depth of burn injury by collagen stainability... collagen denaturation (via scattering changes), hemodynamics and vascular damage each of which have the potential to provide clinicians with
An Analysis of the Small and Disadvantaged Business Set-Aside Program in the US Air Force
1990-09-01
O pftno" 911 ~5 O7 1/ AFIT/GSM/LSY/90S-30 AN ANALYSIS OF THE SMALL AND DISADVANTAGED BUSINESS SET-ASIDE PROGRAM IN THE US AIR FORCE THESIS Kenneth L...For NTIS GRA & t DTIC TAB 0 Unannounced ;Arl an~d/or Uist I Sp o3ia -. . . AFIT/GSM/LSY/90S-30 AN ANALYSIS OF THE SMALL AND DISADVANTAGED BUSINESS... Disadvantages ............. 29 Effectiveness .................. 31 Alternatives. .................. 32 Conclusion. ................... 33 III. Methodology
X-ray properties of the Be/X-ray system 28 0114+650 = LSI +65deg 010
NASA Technical Reports Server (NTRS)
Koenigsberger, G.; Swank, J. H.; Szymkowiak, A. E.; White, N. E.
1983-01-01
Results are presented from experiments on the Einstein Observatory, HEAO 1, and OSO 8 on the temporal and spectral properties of 2S 0114+650. In a 12 hr Einstein monitor proportional counter and solid state spectrometer observation, two episodes of flaring occurred by an order of magnitude over about 1 hr. Variability on shorter time scales showed a preferred period of 14.9 minutes, but periodic pulsations were not seen in the HEAO 1 and OSO 8 data. The spectra above 1 keV were typical of accreting X-ray pulsars; the power law was E exp -alpha with alpha of about 1.2 for the number spectrum up to a cutoff at 14 keV. There is some evidence that the spectrum is steeper when the source is quiescent at low luminosity, but no large spectral changes attended the flares. Absorption column densities were consistent with interstellar reddening of the proposed companion, the Be star LSI +65 deg010. In the minute and hour variability and in the spectral character, 2S0114+650 is similar to other Be star-neutron star binary X-ray sources. Variations over several days in the OSO 8 data suggest orbital effects.
Kim, Woo-Keun; Jung, Jinho
2016-06-01
The integration of biomarker responses ranging from the molecular to the individual level is of great interest for measuring the toxic effects of hazardous chemicals or effluent mixtures on aquatic organisms. This study evaluated the effects of wastewater treatment plant (WWTP) effluents on the freshwater pale chub Zacco platypus by using multi-level biomarker responses at molecular [mRNA expression of catalase (CAT), superoxide dismutase (SOD), glutathione S-transferase (GST), and metallothionein (MT)], biochemical (enzyme activities of CAT, SOD, GST, and concentration of MT), and physiological [condition factor (CF) and liver somatic index (LSI)] levels. The mRNA expression levels of GST and MT in Z. platypus from a site downstream of a WWTP significantly increased by 2.2- and 4.5-fold (p<0.05) when compared with those from an upstream site. However, the enzyme activities of CAT, SOD, and GST in fish from the downstream site significantly decreased by 43%, 98%, and 13%, respectively (p<0.05), except for an increase in MT concentration (41%). In addition, a significant increase in LSI (46%) was observed in Z. platypus from the downstream site (p<0.05). Concentrations of Cu, Zn, Cd, and Pb in the liver of Z. platypus were higher (530%, 353%, 800%, and 2,200%, respectively) in fish from a downstream site than in fish from an upstream location, and several multi-level biomarker responses were significantly correlated with the accumulated metals in Z. platypus (p<0.05). Integrated biomarker responses at molecular, biochemical, and physiological levels (multi-level IBR) were much higher (about 4-fold) at the downstream site than at the upstream site. This study suggests that the multi-level IBR approach is very useful for quantifying in situ adverse effects of WWTP effluents. Copyright © 2016 Elsevier Inc. All rights reserved.
Enkvist, Åsa; Ekström, Henrik; Elmståhl, Sölve
2013-01-01
Introduction Studies on the associations between cognitive abilities and life satisfaction (LS) in the oldest-old are few. The aim of this study was to explore whether abilities in six different cognitive domains could predict LS in the oldest-old 3 years later. Methods The study population consisted of 681 individuals aged 78–98 years, drawn from the longitudinal population study “Good Aging in Skåne,” which is part of a national survey (The Swedish National Study on Aging and Care). Scores on 13 cognitive tests were related to scores on Neugartens’ LS index A (LSI-A) 3 years later. The cognitive tests were added into six different cognitive domains. A multiple regression analysis was constructed for each cognitive domain separately, with scores on the LSI-A as the dependent variable. The model was adjusted stepwise for sex, age, education, functional capacity, and depressive mood. Results Significant correlations were found between digit cancellation, word recall, verbal fluency (VF) A, VF animals, VF occupations, and mental rotations at baseline, as well as LSI-A at follow-up. The domains of spatial abilities (B = 0.453, P = 0.014) and processing speed (B = 0.118, P = 0.020) remained significantly associated with LSI-A 3 years later after adjustment. Conclusion The cognitive domains of spatial abilities and processing speed predicted LS 3 years later in the oldest-old. Clinical implications are discussed. PMID:23874091
Staging Options for the Air Force’s Electronic Combat Test Capability: a Cost Analysis
1990-09-01
strategic in nature and completely different than daily operating decisions (20:6). Horngren , in his book Cost Accounting : A Managerial Emphasis...AFIT/GCA/LSY/90S-3 DTTC S E-191 J) C, STAGING OPTIONS FOR THE AIR FORCE’S ELECTRONIC COMBAT TEST CAPABILITY: A COST ANALYSIS THESIS Joseph J. Landino...Alternative Costs ......... 56 v AFIT/GCA/LSY/90S-3 Abstract This study’s purpose was to identify the lowest cost aircraft staging base( s ) for the Air
Oda, Shinobu; Michihata, Sayumi; Sakamoto, Naoki; Horibe, Hideo; Kono, Akihiko; Ohashi, Shinichi
2012-12-01
The addition of anion-exchange resin microparticles into a polyacrylonitrile (PAN) ballooned microsphere layer drastically enhanced the fermentative activity of Trichoderma atroviride AG2755-5NM398 in an extractive liquid-surface immobilization (Ext-LSI) system. The production of 6-pentyl-α-pyrone (6PP), a fungicidal secondary metabolite, was 1.92-fold higher than the control (PAN alone). Copyright © 2012 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.
Mongoose: Creation of a Rad-Hard MIPS R3000
NASA Technical Reports Server (NTRS)
Lincoln, Dan; Smith, Brian
1993-01-01
This paper describes the development of a 32 Bit, full MIPS R3000 code-compatible Rad-Hard CPU, code named Mongoose. Mongoose progressed from contract award, through the design cycle, to operational silicon in 12 months to meet a space mission for NASA. The goal was the creation of a fully static device capable of operation to the maximum Mil-883 derated speed, worst-case post-rad exposure with full operational integrity. This included consideration of features for functional enhancements relating to mission compatibility and removal of commercial practices not supported by Rad-Hard technology. 'Mongoose' developed from an evolution of LSI Logic's MIPS-I embedded processor, LR33000, code named Cobra, to its Rad-Hard 'equivalent', Mongoose. The term 'equivalent' is used to infer that the core of the processor is functionally identical, allowing the same use and optimizations of the MIPS-I Instruction Set software tool suite for compilation, software program trace, etc. This activity was started in September of 1991 under a contract from NASA-Goddard Space Flight Center (GSFC)-Flight Data Systems. The approach affected a teaming of NASA-GSFC for program development, LSI Logic for system and ASIC design coupled with the Rad-Hard process technology, and Harris (GASD) for Rad-Hard microprocessor design expertise. The program culminated with the generation of Rad-Hard Mongoose prototypes one year later.
NASA Astrophysics Data System (ADS)
Othman, A. A.; Gloaguen, R.; Andreani, L.; Rahnama, M.
2015-03-01
During the last decades, expansion of settlements into areas prone to landslides in Iraq has increased the importance of accurate hazard assessment. Susceptibility mapping provides information about hazardous locations and thus helps to potentially prevent infrastructure damage due to mass wasting. The aim of this study is to evaluate and compare frequency ratio (FR), weight of evidence (WOE), logistic regression (LR) and probit regression (PR) approaches in combination with new geomorphological indices to determine the landslide susceptibility index (LSI). We tested these four methods in Mawat area, Kurdistan Region, NE Iraq, where landslides occur frequently. For this purpose, we evaluated 16 geomorphological, geological and environmental predicting factors mainly derived from the advanced spaceborne thermal emission and reflection radiometer (ASTER) satellite. The available reference inventory includes 351 landslides representing a cumulative surface of 3.127 km2. This reference inventory was mapped from QuickBird data by manual delineation and partly verified by field survey. The areas under curve (AUC) of the receiver operating characteristic (ROC), and relative landslide density (R index) show that all models perform similarly and that focus should be put on the careful selection of proxies. The results indicate that the lithology and the slope aspects play major roles for landslide occurrences. Furthermore, this paper demonstrates that using hypsometric integral as a prediction factor instead of slope curvature gives better results and increases the accuracy of the LSI.
Müller, Ulrike; Krüger-Franke, Michael; Schmidt, Michael; Rosemeyer, Bernd
2015-12-01
The aim of the study was to find predictive parameters for a successful resumption of pre-injury level of sport 6 months post anterior cruciate ligament (ACL) reconstruction. In a prospective study, 40 patients with a ruptured ACL were surgically treated with semitendinosus tendon autograft. Six months after surgery, strength of knee extensors and flexors, four single-leg hop tests, Anterior Cruciate Ligament-Return to Sport after Injury Scale (ACL-RSI), subjective International Knee Documentation Committee (IKDC) 2000 and the Tampa Scale of Kinesiophobia-11 (TSK-11) were assessed. Seven months post-operatively, a standardized interview was conducted to identify "return to sport" (RS) and "non-return to sport" (nRS) patients. Logistic regression and "Receiver Operating Characteristic" (ROC) analyses were used to determine predictive parameters. No significant differences could be detected between RS and nRS patients concerning socio-demographic data, muscle tests, square hop and TSK-11. In nRS patients, the Limb Symmetry Index (LSI) of single hop for distance (p = 0.005), crossover hop (p = 0.008) and triple hop (p = 0.001) were significantly lower, in addition to the ACL-RSI (p = 0.013) and IKDC 2000 (p = 0.037). The cut-off points for LSI single hop for distance were 75.4 % (sensitivity 0.74; specificity 0.88), and for ACL-RSI 51.3 points (sensitivity 0.97; specificity 0.63). Logistic regression distinguished between RS and nRS subjects (sensitivity 0.97; specificity 0.63). The single hop for distance and ACL-RSI were found to be the strongest predictive parameters, assessing both the objective functional and the subjective psychological aspects of returning to sport. Both tests may help to identify patients at risk of not returning to pre-injury sport. II.
The Evolution of Silicon Transport in Eukaryotes
Marron, Alan O.; Ratcliffe, Sarah; Wheeler, Glen L.; Goldstein, Raymond E.; King, Nicole; Not, Fabrice; de Vargas, Colomban; Richter, Daniel J.
2016-01-01
Biosilicification (the formation of biological structures from silica) occurs in diverse eukaryotic lineages, plays a major role in global biogeochemical cycles, and has significant biotechnological applications. Silicon (Si) uptake is crucial for biosilicification, yet the evolutionary history of the transporters involved remains poorly known. Recent evidence suggests that the SIT family of Si transporters, initially identified in diatoms, may be widely distributed, with an extended family of related transporters (SIT-Ls) present in some nonsilicified organisms. Here, we identify SITs and SIT-Ls in a range of eukaryotes, including major silicified lineages (radiolarians and chrysophytes) and also bacterial SIT-Ls. Our evidence suggests that the symmetrical 10-transmembrane-domain SIT structure has independently evolved multiple times via duplication and fusion of 5-transmembrane-domain SIT-Ls. We also identify a second gene family, similar to the active Si transporter Lsi2, that is broadly distributed amongst siliceous and nonsiliceous eukaryotes. Our analyses resolve a distinct group of Lsi2-like genes, including plant and diatom Si-responsive genes, and sequences unique to siliceous sponges and choanoflagellates. The SIT/SIT-L and Lsi2 transporter families likely contribute to biosilicification in diverse lineages, indicating an ancient role for Si transport in eukaryotes. We propose that these Si transporters may have arisen initially to prevent Si toxicity in the high Si Precambrian oceans, with subsequent biologically induced reductions in Si concentrations of Phanerozoic seas leading to widespread losses of SIT, SIT-L, and Lsi2-like genes in diverse lineages. Thus, the origin and diversification of two independent Si transporter families both drove and were driven by ancient ocean Si levels. PMID:27729397
Neuroanatomy and sex differences of the lordosis-inhibiting system in the lateral septum
Tsukahara, Shinji; Kanaya, Moeko; Yamanouchi, Korehito
2014-01-01
Female sexual behavior in rodents, termed lordosis, is controlled by facilitatory and inhibitory systems in the brain. It has been well demonstrated that a neural pathway from the ventromedial hypothalamic nucleus (VMN) to the midbrain central gray (MCG) is essential for facilitatory regulation of lordosis. The neural pathway from the arcuate nucleus to the VMN, via the medial preoptic nucleus, in female rats mediates transient suppression of lordosis, until female sexual receptivity is induced. In addition to this pathway, other regions are involved in inhibitory regulation of lordosis in female rats. The lordosis-inhibiting systems exist not only in the female brain but also in the male brain. The systems contribute to suppression of heterotypical sexual behavior in male rats, although they have the potential ability to display lordosis. The lateral septum (LS) exerts an inhibitory influence on lordosis in both female and male rats. This review focuses on the neuroanatomy and sex differences of the lordosis-inhibiting system in the LS. The LS functionally and anatomically links to the MCG to exert suppression of lordosis. Neurons of the intermediate part of the LS (LSi) serve as lordosis-inhibiting neurons and project axons to the MCG. The LSi-MCG neural connection is sexually dimorphic, and formation of the male-like LSi-MCG neural connection is affected by aromatized testosterone originating from the testes in the postnatal period. The sexually dimorphic LSi-MCG neural connection may reflect the morphological basis of sex differences in the inhibitory regulation of lordosis in rats. PMID:25278832
Preprototype Vapor Compression Distillation Subsystem development
NASA Technical Reports Server (NTRS)
Thompson, C. D.; Ellis, G. S.; Schubert, F. H.
1981-01-01
Vapor Compression Distillation (VCD) has evolved as the most promising approach to reclaim potable water from wastewater for future long-term manned space missions. Life Systems, Inc. (LSI), working with NASA, has developed a preprototype Vapor Compression Distillation Subsystem (VCDS) which processes wastewater at 1.4 kg/h. The preprototype unit weighs 143 kg, occupies a volume of 0.47 cu m, and will reclaim 96 percent of the available wastewater. This unit has been tested by LSI and is scheduled for further testing at NASA-JSC. This paper presents the preprototype VCDS design, configuration, performance data, test results and flight system projections.
Hardware synthesis from DDL. [Digital Design Language for computer aided design and test of LSI
NASA Technical Reports Server (NTRS)
Shah, A. M.; Shiva, S. G.
1981-01-01
The details of the digital systems can be conveniently input into the design automation system by means of Hardware Description Languages (HDL). The Computer Aided Design and Test (CADAT) system at NASA MSFC is used for the LSI design. The Digital Design Language (DDL) has been selected as HDL for the CADAT System. DDL translator output can be used for the hardware implementation of the digital design. This paper addresses problems of selecting the standard cells from the CADAT standard cell library to realize the logic implied by the DDL description of the system.
Duarte, M O; Mendes-Rodrigues, C; Alves, M F; Oliveira, P E; Sampaio, D S
2017-03-01
Mixed cross and self-pollen load on the stigma (mixed pollination) of species with late-acting self-incompatibility system (LSI) can lead to self-fertilized seed production. This "cryptic self-fertility" may allow selfed seedling development in species otherwise largely self-sterile. Our aims were to check if mixed pollinations would lead to fruit set in LSI Adenocalymma peregrinum, and test for evidence of early-acting inbreeding depression in putative selfed seeds from mixed pollinations. Experimental pollinations were carried out in a natural population. Fruit and seed set from self-, cross and mixed pollinations were analysed. Further germination tests were carried out for the seeds obtained from treatments. Our results confirm self-incompatibility, and fruit set from cross-pollinations was three-fold that from mixed pollinations. This low fruit set in mixed pollinations is most likely due to a greater number of self- than cross-fertilized ovules, which promotes LSI action and pistil abortion. Likewise, higher percentage of empty seeds in surviving fruits from mixed pollinations compared with cross-pollinations is probably due to ovule discounting caused by self-fertilization. Moreover, germinability of seeds with developed embryos was lower in fruits from mixed than from cross-pollinations, and the non-viable seeds from mixed pollinations showed one-third of the mass of those from cross-pollinations. The great number of empty seeds, lower germinability, lower mass of non-viable seeds, and higher variation in seed mass distribution in mixed pollinations, strongly suggests early-acing inbreeding depression in putative selfed seeds. In this sense, LSI and inbreeding depression acting together probably constrain self-fertilized seedling establishment in A. peregrinum. © 2016 German Botanical Society and The Royal Botanical Society of the Netherlands.
Vivancos, Julien; Labbé, Caroline; Menzies, James G; Bélanger, Richard R
2015-08-01
On absorption by plants, silicon (Si) offers protection against many fungal pathogens, including powdery mildews. The mechanisms by which Si exerts its prophylactic role remain enigmatic, although a prevailing hypothesis suggests that Si positively influences priming. Attempts to decipher Si properties have been limited to plants able to absorb Si, which excludes the model plant Arabidopsis because it lacks Si influx transporters. In this work, we were able to engineer Arabidopsis plants with an Si transporter from wheat (TaLsi1) and to exploit mutants (pad4 and sid2) deficient in salicylic acid (SA)-dependent defence responses to study their phenotypic response and changes in defence expression against Golovinomyces cichoracearum (Gc) following Si treatment. Our results showed that TaLsi1 plants contained significantly more Si and were significantly more resistant to Gc infection than control plants when treated with Si, the first such demonstration in a plant transformed with a heterologous Si transporter. The resistant plants accumulated higher levels of SA and expressed higher levels of transcripts encoding defence genes, thus suggesting a role for Si in the process. However, TaLsi1 pad4 and TaLsi1 sid2 plants were also more resistant to Gc than were pad4 and sid2 plants following Si treatment. Analysis of the resistant phenotypes revealed a significantly reduced production of SA and expression of defence genes comparable with susceptible controls. These results indicate that Si contributes to Arabidopsis defence priming following pathogen infection, but highlight that Si will confer protection even when priming is altered. We conclude that Si-mediated protection involves mechanisms other than SA-dependent defence responses. © 2014 BSPP AND JOHN WILEY & SONS LTD.
Pontigo, Sofía; Godoy, Karina; Jiménez, Héctor; Gutiérrez-Moraga, Ana; Mora, María de la Luz; Cartes, Paula
2017-01-01
Silicon (Si) has been well documented to alleviate aluminum (Al) toxicity in vascular plants. However, the mechanisms underlying these responses remain poorly understood. Here, we assessed the effect of Si on the modulation of Si/Al uptake and the antioxidant performance of ryegrass plants hydroponically cultivated with Al (0 and 0.2 mM) in combination with Si (0, 0.5, and 2.0 mM). Exposure to Al significantly increased Al concentration, mainly in the roots, with a consequent reduction in root growth. However, Si applied to the culture media steadily diminished the Al concentration in ryegrass, which was accompanied by an enhancement in root dry matter production. A reduced concentration of Si in plant tissues was also observed when plants were simultaneously supplied with Al and Si. Interestingly, Si transporter genes ( Lsi1 and Lsi2 ) were down-regulated in roots after Si or Al was applied alone; however, both Lsi1 and Lsi2 were up-regulated as a consequence of Si application to Al-treated plants, denoting that there is an increase in Si requirement in order to cope with Al stress in ryegrass. Whereas Al addition triggered lipid peroxidation, Si contributed to an attenuation of Al-induced oxidative stress by increasing phenols concentration and modulating the activities of superoxide dismutase (SOD), catalase, peroxidase, and ascorbate peroxidase antioxidant enzymes. Differential changes in gene expression of SOD isoforms ( Mn-SOD, Cu/Zn-SOD , and Fe-SOD ) and the profile of peroxide (H 2 O 2 ) generation were also induced by Si in Al-stressed plants. This, to the best of our knowledge, is the first study to present biochemical and molecular evidence supporting the effect of Si on the alleviation of Al toxicity in ryegrass plants.
Application of microbial electrolysis cells to treat spent yeast from an alcoholic fermentation.
Sosa-Hernández, Ornella; Popat, Sudeep C; Parameswaran, Prathap; Alemán-Nava, Gibrán Sidney; Torres, César I; Buitrón, Germán; Parra-Saldívar, Roberto
2016-01-01
Spent yeast (SY), a major challenge for the brewing industry, was treated using a microbial electrolysis cell to recover energy. Concentrations of SY from bench alcoholic fermentation and ethanol were tested, ranging from 750 to 1500mgCOD/L and 0 to 2400mgCOD/L respectively. COD removal efficiency (RE), coulombic efficiency (CE), coulombic recovery (CR), hydrogen production and current density were evaluated. The best treatment condition was 750mgCOD/LSY+1200mgCOD/L ethanol giving higher COD RE, CE, CR (90±1%, 90±2% and 81±1% respectively), as compared with 1500mgCOD/LSY (76±2%, 63±7% and 48±4% respectively); ethanol addition was significantly favorable (p value=0.011), possibly due to electron availability and SY autolysis. 1500mgCOD/LSY+1200mgCOD/L ethanol achieved higher current density (222.0±31.3A/m(3)) and hydrogen production (2.18±0.66 [Formula: see text] ) but with lower efficiencies (87±2% COD RE, 71.0±.4% CE). Future work should focus on electron sinks, acclimation and optimizing SY breakdown. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.
NASA Astrophysics Data System (ADS)
Matsuda, Shinpei; Kikuchi, Erumu; Yamane, Yasumasa; Okazaki, Yutaka; Yamazaki, Shunpei
2015-04-01
Field-effect transistors (FETs) with c-axis-aligned crystalline In-Ga-Zn-O (CAAC-IGZO) active layers have extremely low off-state leakage current. Exploiting this feature, we investigated the application of CAAC-IGZO FETs to LSI memories. A high on-state current is required for the high-speed operation of these LSI memories. The field-effect mobility μFE of a CAAC-IGZO FET is relatively low compared with the electron mobility of single-crystal Si (sc-Si). In this study, we measured and calculated the channel length L dependence of μFE for CAAC-IGZO and sc-Si FETs. For CAAC-IGZO FETs, μFE remains almost constant, particularly when L is longer than 0.3 µm, whereas that of sc-Si FETs decreases markedly as L shortens. Thus, the μFE difference between both FET types is reduced by miniaturization. This difference in μFE behavior is attributed to the different susceptibilities of electrons to phonon scattering. On the basis of this result and the extremely low off-state leakage current of CAAC-IGZO FETs, we expect high-speed LSI memories with low power consumption.
Discussion on the progress and future of satellite communication (Japan)
NASA Technical Reports Server (NTRS)
Ogata, M.; Mizusawa, H.; Irie, K.
1985-01-01
The current status of communications satellite development in Japan is presented. It is shown that beginning with research on satellite communucations in the late 1950's, progress was made in the areas of communications, remote sensing, and technology experimentation. The current status of communication satellites is presented, stressing development in the areas of CFRP construction elements, the use of LSI and MIC circuits, advanced multibeam antenna systems, Ku and Ka band transmission systems, and the shift to small-scale earth stations. Methods for reducing costs and increasing transmission efficiency are shown. The technical specifications of all satellite projects currently under development are given. Users of Japanese communications satellite are presented.
In vivo optical imaging of cortical spreading depression in rat
NASA Astrophysics Data System (ADS)
Chen, Shangbin; Li, Pengcheng; Luo, Weihua; Gong, Hui; Cheng, Haiying; Luo, Qingming
2003-12-01
Intrinsic optical signals imaging (IOSI) and laser speckle imaging (LSI) are both novel techniques for functional neuroimaging in vivo. Combining them to study cortical spreading depression (CSD) which is an important disease model for migraine and other neurological disorders. CSD were induced by pinprick in Sprague-Dawley rats. Intrinsic optical signals (IOS) at 540 nm showed CSD evolution happened in one hemisphere cortex at speeds of 3.7+/-0.4 mm/min, and the vasodilation closely correlated a four-phasic response. By LSI, we observed a transient and significant increase cerebral blood flow (CBF). In this paper, optical imaging would be showed as a powerful tool for describing the hemodynamic character during CSD in rat.
C-MOS array design techniques: SUMC multiprocessor system study
NASA Technical Reports Server (NTRS)
Clapp, W. A.; Helbig, W. A.; Merriam, A. S.
1972-01-01
The current capabilities of LSI techniques for speed and reliability, plus the possibilities of assembling large configurations of LSI logic and storage elements, have demanded the study of multiprocessors and multiprocessing techniques, problems, and potentialities. Evaluated are three previous systems studies for a space ultrareliable modular computer multiprocessing system, and a new multiprocessing system is proposed that is flexibly configured with up to four central processors, four 1/0 processors, and 16 main memory units, plus auxiliary memory and peripheral devices. This multiprocessor system features a multilevel interrupt, qualified S/360 compatibility for ground-based generation of programs, virtual memory management of a storage hierarchy through 1/0 processors, and multiport access to multiple and shared memory units.
Holm, Thomas; Gallo, Kevin P.; Bailey, Bryan
2010-01-01
The Committee on Earth Observation Satellites is an international group that coordinates civil space-borne observations of the Earth, and provides the space component of the Global Earth Observing System of Systems (GEOSS). The CEOS Virtual Constellations concept was implemented in an effort to engage and coordinate disparate Earth observing programs of CEOS member agencies and ultimately facilitate their contribution in supplying the space-based observations required to satisfy the requirements of the GEOSS. The CEOS initially established Study Teams for four prototype constellations that included precipitation, land surface imaging, ocean surface topography, and atmospheric composition. The basic mission of the Land Surface Imaging (LSI) Constellation [1] is to promote the efficient, effective, and comprehensive collection, distribution, and application of space-acquired image data of the global land surface, especially to meet societal needs of the global population, such as those addressed by the nine Group on Earth Observations (GEO) Societal Benefit Areas (SBAs) of agriculture, biodiversity, climate, disasters, ecosystems, energy, health, water, and weather. The LSI Constellation Portal is the result of an effort to address important goals within the LSI Constellation mission and provide resources to assist in planning for future space missions that might further contribute to meeting those goals.
NASA Astrophysics Data System (ADS)
Uno, Takanori; Ichikawa, Kouji; Mabuchi, Yuichi; Nakamura, Atsushi; Okazaki, Yuji; Asai, Hideki
In this paper, we studied the use of common-mode noise reduction technique for in-vehicle electronic equipment in an actual instrument design. We have improved the circuit model of the common-mode noise that flows to the wire harness to add the effect of a bypass capacitor located near the LSI. We analyzed the improved circuit model using a circuit simulator and verified the effectiveness of the noise reduction condition derived from the circuit model. It was also confirmed that offsetting the impedance mismatch in the PCB section requires to make a circuit constant larger than that necessary for doing the impedance mismatch in the LSI section. An evaluation circuit board comprising an automotive microcomputer was prototyped to experiment on the common-mode noise reduction effect of the board. The experimental results showed the noise reduction effect of the board. The experimental results also revealed that the degree of impedance mismatch in the LSI section can be estimated by using a PCB having a known impedance. We further inquired into the optimization of impedance parameters, which is difficult for actual products at present. To satisfy the noise reduction condition composed of numerous parameters, we proposed a design method using an optimization algorithm and an electromagnetic field simulator, and confirmed its effectiveness.
Pietrosimone, Brian; Loeser, Richard F; Blackburn, J Troy; Padua, Darin A; Harkey, Matthew S; Stanley, Laura E; Luc-Harkey, Brittney A; Ulici, Veronica; Marshall, Stephen W; Jordan, Joanne M; Spang, Jeffery T
2017-10-01
The purpose of our study was to determine the association between biomechanical outcomes of walking gait (peak vertical ground reaction force [vGRF], vGRF loading rate [vGRF-LR], and knee adduction moment [KAM]) 6 months following anterior cruciate ligament reconstruction (ACLR) and biochemical markers of serum type-II collagen turnover (collagen type-II cleavage product to collagen type-II C-propeptide [C2C:CPII]), plasma degenerative enzymes (matrix metalloproteinase-3 [MMP-3]), and a pro-inflammatory cytokine (interleukin-6 [IL-6]). Biochemical markers were evaluated within the first 2 weeks (6.5 ± 3.8 days) following ACL injury and again 6 months following ACLR in eighteen participants. All peak biomechanical outcomes were extracted from the first 50% of the stance phase of walking gait during a 6-month follow-up exam. Limb symmetry indices (LSI) were used to normalize the biomechanical outcomes in the ACLR limb to that of the contralateral limb (ACLR/contralateral). Bivariate correlations were used to assess associations between biomechanical and biochemical outcomes. Greater plasma MMP-3 concentrations after ACL injury and at the 6-month follow-up exam were associated with lesser KAM LSI. Lesser KAM was associated with greater plasma IL-6 at the 6-month follow-up exam. Similarly, lesser vGRF-LR LSI was associated with greater plasma MMP-3 concentrations at the 6-month follow-up exam. Lesser peak vGRF LSI was associated with higher C2C:CPII after ACL injury, yet this association was not significant after accounting for walking speed. Therefore, lesser biomechanical loading in the ACLR limb, compared to the contralateral limb, 6 months following ACLR may be related to deleterious joint tissue metabolism that could influence future cartilage breakdown. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:2288-2297, 2017. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.
Ribas, Talita Fernanda Augusto; Rodrigues, Luis Reginaldo Ribeiro; Nagamachi, Cleusa Yoshiko; Gomes, Anderson José Baia; Rissino, Jorge das Dores; O'Brien, Patricia Caroline Mary; Yang, Fengtang; Ferguson-Smith, Malcolm Andrew; Pieczarka, Julio Cesar
2015-01-01
The subfamily Phyllostominae comprises taxa with a variety of feeding strategies. From the cytogenetic point of view, Phyllostominae shows different rates of chromosomal evolution between genera, with Phyllostomus hastatus probably retaining the ancestral karyotype for the subfamily. Since chromosomal rearrangements occur rarely in the genome and have great value as phylogenetic markers and in taxonomic characterization, we analyzed three species: Lophostoma silvicola (LSI), Phyllostomus discolor (PDI) and Tonatia saurophila (TSA), representing the tribe Phyllostomini, collected in the Amazon region, by classic and molecular cytogenetic techniques in order to reconstruct the phylogenetic relationships within this tribe. LSA has a karyotype of 2n=34 and FN=60, PDI has 2n=32 and FN=60 and TSA has 2n=16 and FN=20. Comparative analysis using G-banding and chromosome painting show that the karyotypic complement of TSA is highly rearranged relative to LSI and PHA, while LSI, PHA and PDI have similar karyotypes, differing by only three chromosome pairs. Nearly all chromosomes of PDI and PHA were conserved in toto, except for chromosome 15 that was changed by a pericentric inversion. A strongly supported phylogeny (bootstrap=100 and Bremer=10 steps), confirms the monophyly of Phyllostomini. In agreement with molecular topologies, TSA was in the basal position, while PHA and LSI formed sister taxa. A few ancestral syntenies are conserved without rearrangements and most associations are autapomorphic traits for Tonatia or plesiomorphic for the three genera analyzed here. The karyotype of TSA is highly derived in relation to that of other phyllostomid bats, differing from the supposed ancestral karyotype of Phyllostomidae by multiple rearrangements. Phylogenies based on chromosomal data are independent evidence for the monophyly of tribe Phyllostomini as determined by molecular topologies and provide additional support for the paraphyly of the genus Tonatia by the exclusion of the genus Lophostoma.
Pietrosimone, Brian; Blackburn, J Troy; Padua, Darin A; Pfeiffer, Steven J; Davis, Hope C; Luc-Harkey, Brittney A; Harkey, Matthew S; Stanley, Laura E; Frank, Barnett S; Creighton, R Alexander; Kamath, Ganesh M; Spang, Jeffery T
2018-05-21
The study sought to determine the association between gait biomechanics (vertical ground reaction force [vGRF], vGRF loading rate [vGRF-LR]) collected six months following anterior cruciate ligament reconstruction (ACLR) with patient-reported outcomes at twelve months following ACLR. Walking gait mechanics and all subsections of the Knee Injury and Osteoarthritis Outcomes Score (KOOS) were collected at six and twelve months following ACLR, respectively, in 25 individuals with a unilateral ACLR. Peak vGRF and peak instantaneous vGRF-LR were extracted from the first 50% of the stance phase. Limb symmetry indices (LSI) were used to normalize outcomes in the ACLR limb to that of the uninjured limb (ACLR /uninjured). Linear regression analyses were used to determine associations between biomechanical outcomes and KOOS while accounting for walking speed. Receiver operator characteristic curves were used to determine the accuracy of 6-month biomechanical outcomes for identifying individuals with acceptable patient-reported outcomes, using previously defined KOOS cut-off scores,12 months post-ACLR. Individuals with lower peak vGRF LSI 6 months post-ACLR demonstrated worse patient-reported outcomes (KOOS Pain, Activities of Daily life, Sport and Recreation, Quality of Life) at the 12-month exam. A peak vGRF LSI ≥0.99 6 months following ACLR associated with 13.33x higher odds of reporting acceptable patient-reported outcomes 12 months post-ACLR. Lesser peak vGRF LSI during walking at 6-months post-ACLR may be a critical indicator of worse future patient-reported outcomes. Achieving early symmetrical lower extremity loading and minimizing under-loading of the ACLR limb during walking may be a potential therapeutic target for improving patient-reported outcomes post-ACLR. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.
Ribas, Talita Fernanda Augusto; Rodrigues, Luis Reginaldo Ribeiro; Nagamachi, Cleusa Yoshiko; Gomes, Anderson José Baia; Rissino, Jorge das Dores; O'Brien, Patricia Caroline Mary; Yang, Fengtang; Ferguson-Smith, Malcolm Andrew; Pieczarka, Julio Cesar
2015-01-01
The subfamily Phyllostominae comprises taxa with a variety of feeding strategies. From the cytogenetic point of view, Phyllostominae shows different rates of chromosomal evolution between genera, with Phyllostomus hastatus probably retaining the ancestral karyotype for the subfamily. Since chromosomal rearrangements occur rarely in the genome and have great value as phylogenetic markers and in taxonomic characterization, we analyzed three species: Lophostoma silvicola (LSI), Phyllostomus discolor (PDI) and Tonatia saurophila (TSA), representing the tribe Phyllostomini, collected in the Amazon region, by classic and molecular cytogenetic techniques in order to reconstruct the phylogenetic relationships within this tribe. LSA has a karyotype of 2n=34 and FN=60, PDI has 2n=32 and FN=60 and TSA has 2n=16 and FN=20. Comparative analysis using G-banding and chromosome painting show that the karyotypic complement of TSA is highly rearranged relative to LSI and PHA, while LSI, PHA and PDI have similar karyotypes, differing by only three chromosome pairs. Nearly all chromosomes of PDI and PHA were conserved in toto, except for chromosome 15 that was changed by a pericentric inversion. A strongly supported phylogeny (bootstrap=100 and Bremer=10 steps), confirms the monophyly of Phyllostomini. In agreement with molecular topologies, TSA was in the basal position, while PHA and LSI formed sister taxa. A few ancestral syntenies are conserved without rearrangements and most associations are autapomorphic traits for Tonatia or plesiomorphic for the three genera analyzed here. The karyotype of TSA is highly derived in relation to that of other phyllostomid bats, differing from the supposed ancestral karyotype of Phyllostomidae by multiple rearrangements. Phylogenies based on chromosomal data are independent evidence for the monophyly of tribe Phyllostomini as determined by molecular topologies and provide additional support for the paraphyly of the genus Tonatia by the exclusion of the genus Lophostoma. PMID:25806812
Stradley, Stephanie L.; Buckley, Bernadette D.; Kaminski, Thomas W.; Horodyski, MaryBeth; Fleming, David; Janelle, Christopher M.
2002-01-01
Objective: To identify the learning styles and preferred environmental characteristics of undergraduate athletic training students in Commission on Accreditation of Allied Health Education Programs (CAAHEP)-accredited athletic training education programs and to determine if learning-style differences existed among geographic regions of the country. Design and Setting: Fifty CAAHEP-accredited athletic training programs were randomly selected in proportion to the number of programs in each geographic region. Ten students from each school were selected to complete the Kolb Learning Style Inventory (LSI) and the Productivity Environmental Preference Survey (PEPS). Subjects: A total of 193 undergraduate athletic training students (84 men, 109 women) with a mean age of 22.3 ± 2.8 years completed the PEPS, while 188 students completed the LSI. Measurements: We used chi-square analyses to determine if differences existed in learning-style type and if these differences were based on geographic location. We calculated analysis of variance to determine if there were any geographic differences in the mean overall combination scores of the LSI. Descriptive statistics were used to evaluate the PEPS. Results: The overall return rate was 38%. The chi-square analyses revealed no significant difference in learning-style type for athletic training students, regardless of the geographic region. The LSI yielded a relatively even distribution of learning styles: 29.3% of the students were accommodators, 19.7% were divergers, 21.8% were convergers, and 29.3% were assimilators. The overall mean combination scores were 4.9 (abstract-concrete) and 4.9 (active-reflective), and analysis of variance indicated no significant difference in the mean combination scores among the geographic regions. The PEPS revealed that undergraduate athletic training students demonstrated a strong preference for learning in the afternoon. Conclusions: Undergraduate athletic training students demonstrated great diversity in learning style. Educators must strongly consider this diversity and incorporate teaching methods that will benefit all types of learners. PMID:12937535
Ponticorvo, Adrien; Burmeister, David M.; Rowland, Rebecca; Baldado, Melissa; Kennedy, Gordon T.; Saager, Rolf; Bernal, Nicole; Choi, Bernard; Durkin, Anthony J.
2017-01-01
The current standard for diagnosis of burn severity and subsequent wound healing is through clinical examination, which is highly subjective. Several new technologies are shifting focus to burn care in an attempt to help quantify not only burn depth but also the progress of healing. While accurate early assessment of partial thickness burns is critical for dictating the course of treatment, the ability to quantitatively monitor wound status over time is critical for understanding treatment efficacy. SFDI and LSI are both non-invasive imaging modalities that have been shown to have great diagnostic value for burn severity, but have yet to be tested over the course of wound healing. In this study, a hairless rat model (n=6, 300-450g) was used with a four pronged comb to create four identical partial thickness burns (superficial n=3 and deep n=3) that were used to monitor wound healing over a 28 day period. Weekly biopsies were taken for histological analysis to verify wound progression. Both SFDI and LSI were performed weekly to track the evolution of hemodynamic (blood flow and oxygen saturation) and structural (reduced scattering coefficient) properties for the burns. LSI showed significant changes in blood flow from baseline to 220% in superficial and 165% in deep burns by day 7. In superficial burns, blood flow returned to baseline levels by day 28, but not for deep burns where blood flow remained elevated. Smaller increases in blood flow were also observed in the surrounding tissue over the same time period. Oxygen saturation values measured with SFDI showed a progressive increase from baseline values of 66% to 74% in superficial burns and 72% in deep burns by day 28. Additionally, SFDI showed significant decreases in the reduced scattering coefficient shortly after the burns were created. The scattering coefficient progressively decreased in the wound area, but returned towards baseline conditions at the end of the 28 day period. Scattering changes in the surrounding tissue remained constant despite the presence of hemodynamic changes. Here we show that LSI and SFDI are capable of monitoring changes in hemodynamic and scattering properties in burn wounds over a 28 day period. These results highlight the potential insights that can be gained by using noninvasive imaging technologies to study wound healing. Further development of these technologies could be revolutionary for wound monitoring and studying the efficacy of different treatments. PMID:28220508
NASA Astrophysics Data System (ADS)
Ponticorvo, A.; Rowland, R.; Baldado, M.; Burmeister, D. M.; Christy, R. J.; Bernal, N.; Durkin, A. J.
2018-02-01
The current standard for assessment of burn severity and subsequent wound healing is through clinical examination, which is highly subjective. Accurate early assessment of burn severity is critical for dictating the course of wound management. Complicating matters is the fact that burn wounds are often large and can have multiple regions that vary in severity. In order to manage the treatment more effectively, a tool that can provide spatially resolved information related to mapping burn severity could aid clinicians when making decisions. Several new technologies focus on burn care in an attempt to help clinicians objectively determine burn severity. By quantifying perfusion, laser speckle imaging (LSI) has had success in categorizing burn wound severity at earlier time points than clinical assessment alone. Additionally, spatial frequency domain imaging (SFDI) is a new technique that can quantify the tissue structural damage associated with burns to achieve earlier categorization of burn severity. Here we compared the performance of a commercial LSI device (PeriCam PSI, Perimed Inc.), a SFDI device (Reflect RSTM, Modulated Imaging Inc.) and conventional clinical assessment in a controlled (porcine) model of graded burn wound severity over the course of 28 days. Specifically we focused on the ability of each system to predict the spatial heterogeneity of the healed wound at 28 days, based on the images at an early time point. Spatial heterogeneity was defined by clinical assessment of distinct regions of healing on day 28. Across six pigs, 96 burn wounds (3 cm diameter) were created. Clinical assessment at day 28 indicated that 39 had appeared to heal in a heterogeneous manner. Clinical observation at day 1 found 35 / 39 (90%) to be spatially heterogeneous in terms of burn severity. The LSI system was able to detect spatial heterogeneity of burn severity in 14 / 39 (36%) cases on day 1 and 23 / 39 cases (59%) on day 7. By contrast the SFDI system was able to detect spatial heterogeneity of burn severity in 39 / 39 (100%) cases on day 1. Here we have demonstrated that for the purposes of predicting heterogeneity in wound healing, SFDI generated scattering properties were a significantly more effective tool than perfusion images measured using LSI. This indicates that SFDI may be better suited to help clinicians categorize different burns earlier, ultimately informing treatment strategy to improve patient outcomes.
Circannual body reserve dynamics and metabolic profile changes in Romane ewes grazing on rangelands.
González-García, E; Gozzo de Figuereido, V; Foulquie, D; Jousserand, E; Autran, P; Camous, S; Tesniere, A; Bocquier, F; Jouven, M
2014-01-01
Throughout an entire year, 41 Romane ewes reared in an extensive rangeland were used to investigate temporal changes in body reserves (BRs) and profiles of related metabolites and metabolic hormones. Ewes were allocated to homogeneous groups according to BW and BCS and were distributed by parity (primiparous [PRIM], n = 21; multiparous [MULT], n = 20) and litter size (LSi; lambing singletons [SING], n = 21 or TWINS, n = 20). The feeding system was based on rotational grazing of rangeland paddocks and progressive supplementation with hay, silage, and barley at late pregnancy during the winter. Individual BW, BCS, plasma NEFA, β-hydroxybutyrate (β-OHB), glucose, insulin, leptin, and triiodothyronine (T3) were monitored at -56, -12, 8, 49, 76, 107, 156, 195, 216, 246, and 301 d relative to lambing. The BR mobilization was observed from late pregnancy to the end of suckling and varied as a function of the ewe energy balance but also because of transitions from fertilized to native rangeland paddocks and by supplementation. Contrarily, BR accretion occurred from weaning, during the dry-off, and until the start of the next pregnancy. Lipolysis was well reflected by NEFA, β-OHB, and T3 kinetics. Mean BW (but not mean BCS) was affected by parity (MULT > PRIM), whereas both BW and BCS were influenced by LSi (SING > TWINS) but only for MULT. The most drastic BW loss was observed during the mid-suckling period (49 d in milk [DIM]) in all ewes. The lack of effects of LSi in PRIM but not in MULT was also evident in the majority of blood plasma kinetics, which were affected (P < 0.0001) by physiological stage in all ewes. A tendency to ketosis (β-OHB) was found in ewes nursing TWINS around lambing, irrespective of parity. Glucose concentrations were greater during suckling and dry-off, and a peak (0.96 ± 0.05 g/L) was attained at 156 DIM in MULT nursing TWINS. The highest plasma leptin concentration was observed during the start and the middle of the next pregnancy in MULT (107-216 DIM; 9.6 ± 0.44 ng/mL). In all ewes the physiological stage affected T3, which was affected by LSi just in MULT (from late pregnancy, MULT by SING > MULT by TWINS; 99.91 vs 85.52 ng/dL) and during suckling (111.7 ± 4.18 ng/dL). Lamb BW was affected at birth and weaning by parity (MULT > PRIM) and LSi (SING > TWINS). Overall, temporal changes in BR were directly affected by the transition of physiological states and feeding levels, whereas individual responses were predetermined by parity. In MULT, the reactivity and magnitude of response was influenced by LSi. The whole set of parameters allowed us to detect sensitive and critical periods throughout the entire annual cycle. We thus identified opportunities for improved nutritional management, for example, during physiological states usually underestimated such as early and mid-pregnancy. This work indicates the applicability of long-term studies about BR dynamics in ruminants as a potential component contributing to farm economic resilience. Copyright © 2014 Elsevier Inc. All rights reserved.
NASA Astrophysics Data System (ADS)
Konishi, Toshifumi; Yamane, Daisuke; Matsushima, Takaaki; Masu, Kazuya; Machida, Katsuyuki; Toshiyoshi, Hiroshi
2014-01-01
This paper reports the design and evaluation results of a capacitive CMOS-MEMS sensor that consists of the proposed sensor circuit and a capacitive MEMS device implemented on the circuit. To design a capacitive CMOS-MEMS sensor, a multi-physics simulation of the electromechanical behavior of both the MEMS structure and the sensing LSI was carried out simultaneously. In order to verify the validity of the design, we applied the capacitive CMOS-MEMS sensor to a MEMS accelerometer implemented by the post-CMOS process onto a 0.35-µm CMOS circuit. The experimental results of the CMOS-MEMS accelerometer exhibited good agreement with the simulation results within the input acceleration range between 0.5 and 6 G (1 G = 9.8 m/s2), corresponding to the output voltages between 908.6 and 915.4 mV, respectively. Therefore, we have confirmed that our capacitive CMOS-MEMS sensor and the multi-physics simulation will be beneficial method to realize integrated CMOS-MEMS technology.
Takdastan, Afshin; Mirzabeygi Radfard, Majid; Yousefi, Mahmood; Abbasnia, Abbas; Khodadadia, Rouhollah; Soleimani, Hamed; Mahvi, Amir Hossein; Naghan, Davood Jalili
2018-06-01
According to World Health Organization guidelines, corrosion control is an important aspect of safe drinking-water supplies. Water always includes ingredients, dissolved gases and suspended materials. Although some of these water ingredients is indispensable for human beings, these elements more than permissible limits, could be endanger human health. The aim of this study is to assess physical and chemical parameters of drinking water in the rural areas of Lordegan city, also to determine corrosion indices. This cross-sectional study has carried out with 141 taken samples during 2017 with 13 parameters, which has been analyzed based on standard method and to estimate the water quality indices from groundwater using ANFIS. Also with regard to standard conditions, results of this paper are compared with Environmental Protection Agency and Iran national standards. Five indices, Ryznar Stability Index (RSI), Langlier Saturation Index (LSI), Larson-Skold Index (LS), Puckorius Scaling Index (PSI), and Aggressive Index (AI) programmed by using Microsoft Excel software. Owing to its simplicity, the program, can easily be used by researchers and operators. Parameters included Sulfate, Sodium, Chloride, and Electrical Conductivity respectively were 13.5, 28, 10.5, and 15% more than standard level. The amount of Nitrate, in 98% of cases were in permissible limits and about 2% were more than standard level. Result of presented research indicate that water is corrosive at 10.6%,89.4%,87.2%,59.6% and 14.9% of drinking water supply reservoirs, according to LSI, RSI, PSI, LS and AI, respectively.
Repeat sample intraocular pressure variance in induced and naturally ocular hypertensive monkeys.
Dawson, William W; Dawson, Judyth C; Hope, George M; Brooks, Dennis E; Percicot, Christine L
2005-12-01
To compare repeat-sample means variance of laser induced ocular hypertension (OH) in rhesus monkeys with the repeat-sample mean variance of natural OH in age-range matched monkeys of similar and dissimilar pedigrees. Multiple monocular, retrospective, intraocular pressure (IOP) measures were recorded repeatedly during a short sampling interval (SSI, 1-5 months) and a long sampling interval (LSI, 6-36 months). There were 5-13 eyes in each SSI and LSI subgroup. Each interval contained subgroups from the Florida with natural hypertension (NHT), induced hypertension (IHT1) Florida monkeys, unrelated (Strasbourg, France) induced hypertensives (IHT2), and Florida age-range matched controls (C). Repeat-sample individual variance means and related IOPs were analyzed by a parametric analysis of variance (ANOV) and results compared to non-parametric Kruskal-Wallis ANOV. As designed, all group intraocular pressure distributions were significantly different (P < or = 0.009) except for the two (Florida/Strasbourg) induced OH groups. A parametric 2 x 4 design ANOV for mean variance showed large significant effects due to treatment group and sampling interval. Similar results were produced by the nonparametric ANOV. Induced OH sample variance (LSI) was 43x the natural OH sample variance-mean. The same relationship for the SSI was 12x. Laser induced ocular hypertension in rhesus monkeys produces large IOP repeat-sample variance mean results compared to controls and natural OH.
Lithium Alkaline Halides—Next Generation of Dual Mode Scintillators
NASA Astrophysics Data System (ADS)
Soundara-Pandian, L.; Hawrami, R.; Glodo, J.; Ariesanti, E.; van Loef, E. V.; Shah, K.
2016-04-01
We report on a new family of scintillators - Lithium alkaline halides, developed based on the alkaline halides by introducing lithium for dual mode gamma-neutron detection. Many different compositions were grown, among which LiSr2I5 (LSI), LiCa2I5 (LCI), LiSr2Br5 (LSB) activated with divalent Europium show good gamma and neutron detection properties. LSI shows the main emission at 497 nm under X-ray excitation. It also shows good proportionality, which in combination with the light yield as high as 60000 photons/MeV, results in an energy resolution of 3.5% at 662 keV. The electron or gamma equivalent energy (GEE) of the thermal neutron peak due to the 6Li neutron capture is 4.1 MeV, which amounts to a very high neutron light yield of 245000 photons. The decay times for neutrons are faster compared to that for gamma-rays, hence we achieved good pulse shape discrimination (PSD) between gamma and neutron events. Our initial studies on the effects of Eu concentration on the properties of LSI show that 3%-4% Eu concentration is optimal for the best performance in terms of gamma and neutron light yields and pulse shape discrimination. LCI shows the main emission at 475 nm under X-ray excitation and a very high gamma light yield of 90000 photons/MeV. The measured energy resolution is 6% at 662 keV. The electron equivalent energy for neutron detection has been measured to be around 3 MeV, which gives a neutron light yield of 270 000 photons. The measured decay times for neutrons are faster compared to gamma decays and the PSD between the gamma-rays and neutrons is not as good as LSI. LSB shows two emissions at 410 and 475 nm under X-ray excitation. The measured light yield is 32000 ph/MeV gamma-ray with an energy resolution of 6% at 662 keV. The electron equivalent energy of the 6Li capture peak was measured to be 3.3 MeV.
Seawater intrusion vulnerability indicators for freshwater lenses in strip islands
NASA Astrophysics Data System (ADS)
Morgan, L.; Werner, A. D.
2014-12-01
Freshwater lenses on small islands have been described as some of the most vulnerable aquifer systems in the world. Yet, little guidance is available regarding methods for rapidly assessing the vulnerability of freshwater lenses to the potential effects of climate change. To address this gap we employ a steady-state analytic modelling approach to develop seawater intrusion (SWI) vulnerability indicator equations. The vulnerability indicator equations quantify the propensity for SWI to occur in strip islands due to both recharge change and sea-level rise (SLR) (incorporating the effect of land surface inundation (LSI)). This work extends that of Werner et al. (2012) who developed SWI vulnerability indicator equations for unconfined and confined continental aquifers, and did not consider LSI. Flux-controlled and head-controlled conceptualisations of freshwater lenses are adopted. Under flux-controlled conditions the water table is able to rise unencumbered by land surface effects. Under head-controlled conditions the head is fixed at the centre of the lens due to, for example, centrally located topographic controls, surface water features or pumping. A number of inferences about SWI vulnerability in freshwater lenses can be made from the analysis: (1) SWI vulnerability indicators for SLR (under flux-controlled conditions) are proportional to lens thickness (or volume) and the rate of LSI and inversely proportional to island width; (2) SWI vulnerability indicators for recharge change (under flux-controlled conditions) are proportional to lens thickness (or volume) and inversely proportional to recharge; (3) SLR has greater impact under head-controlled conditions rather than flux-controlled conditions, whereas the opposite is the case for LSI and recharge change. Example applications to several case studies illustrate use of the method for rapidly ranking lenses according to vulnerability, thereby allowing for prioritisation of areas where further and more detailed SWI investigations may be required. References Werner, A.D., Ward, J.D., Morgan, L.K., Simmons, C.T., Robinson, N.I., Teubner, M.D., 2012. Vulnerability indicators of seawater intrusion. Ground Water 50(1), 48-58. doi:10.1111/j.1745-6584.2011.00817.x.
Usefulness of the Shock Index as a secondary triage tool.
Vassallo, James; Horne, S; Ball, S; Smith, Je
2015-03-01
Secondary triage at a major incident allows for a more detailed assessment of the patient. In the UK, the Triage Sort (TSO) is the preferred method, combining GCS, systolic BP (SBP) and RR to categorise Priority 1 casualties. The Shock Index (SI) is calculated by dividing HR by SBP (HR/SBP). This study examines whether SI is better at predicting need for life-saving intervention (LSI) following trauma than TSO. A prospective observational study was undertaken. Physiological data and interventions performed in the Emergency Department and operating theatre were prospectively collected for 482 consecutive adult trauma patients presenting to Camp Bastion, Afghanistan, over a 6-month period. A patient was deemed to have required LSI if they received any intervention from a set described previously. Complete data were available for 345 patients (71.6%). Of these, 203 (58.8%) were gold standard P1, and 142 (41.2%) were non-P1. The TSO predicted need for LSI with a sensitivity of 58.6% (95% CI 51.8% to 65.4%) and specificity of 88.7% (95% CI 83.5% to 93.9%). Using an SI cut-off >0.75 provided greater sensitivity of 70.0% (95% CI 63.6% to 76.3%) while maintaining an acceptably high (although lower than TSO) specificity of 74.7% (95% CI 67.5% to 81.8%). At this SI cut-off, there was evidence of a difference between TSO and SI in terms of the way in which patients were triaged (p<0.0001). Our study showed that a SI >0.75 more accurately predicted the need for LSI, while maintaining acceptable specificity. SI may be more useful than TSO for secondary triage in a mass-casualty situation; this relationship in civilian trauma should be examined to clarify whether these results can be more widely translated into civilian practice. RCDM/Res/Audit/1036/12/0050. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.
[The Life Style Index: correlations with psychological distress and hostility].
Hyphantis, T; Floros, G D; Goulia, P; Iconomou, G; Assimakopoulos, K
2011-01-01
The Life Style Index (LSI) was designed to assess defense mechanisms, assuming that their use is related to specific emotional states and diagnostic concepts. Aiming to further investigate the psychometric properties of the Greek version of the LSI, the aim of the present study was to investigate the relationship of specific defense mechanisms with dimensions of psychological distress and hostility features in three different populations. The sample comprised 1261 adults (410 healthy participants, 723 medical patients and 128 psychiatric patients). Along with defense mechanisms (LSI), Psychological Distress (General Health Questionnaire, GHQ-28) and Hostility features (Hostility and Direction of Hostility Questionnaire, HDHQ) were also assessed. The results showed that increased psychological distress is related with increased use of all defenses except Denial, with which psychological distress is negatively associated. Regression is constantly related with psychological distress and differentiates psychiatric patients from the other groups of participants, while Compensation and Reaction Formation are related to depressive symptomatology. In medical patients, Repression was found to increase the physical dimension of psychological distress and the social dysfunction. On the contrary,Denial was negatively associated with these dimensions of psychological distress. In the psychiatric patient and healthy participant samples, Projection plays the most detrimental role. Regarding hostility and direction of hostility, those who were found to introvert their hostility presented with higher scores in Denial, indicating that they possibly 'deny' their hostility, and the degree of the Denial was found to be negatively associated with the degree of Introverted Hostility. Those who directed their hostility towards the others, presented with higher rates of Projection, while neither Denial nor Reaction Formation seemed sufficient enough to temper the degree of Extroverted Hostility. In conclusion,the present results strengthen further the validity of the Greek version of the LSI and provide additional evidence about the relation of defence mechanisms with dimensions of psychological distress and the direction of hostility in different populations, indicating that the empirical assessment of defense mechanisms can contribute significantly in the study of the factors that mediate or moderate the course or the outcome of medical or psychiatric disorders.
Acharya, Sanigdha; Sharma, S K; Khandegar, Vinita
2018-06-01
In the present study, hydro-geochemical characteristics of groundwater samples collected from South West Delhi, India, have been assessed. 50 sampling locations were recorded with the help of global positioning system, to assess the groundwater quality and evaluate the corrosion and scaling potential. Hydro-geochemical characterization for different parameters such as pH, temperature (T), electrical conductivity (EC), total dissolved solids (TDS), salinity (SA), total hardness (TH), total alkalinity ( H C O 3 - ), levels of anions such as calcium (Ca +2 ), magnesium (Mg +2 ), sodium (Na + ), potassium (K + ) and cations which include chloride (Cl - ), Flouride (F - ), sulfates ( S O 4 - 2 ), Nitrates ( N O 3 - ) was done using standard APHA methods. The corrosion and scaling potential of groundwater was evaluated by five stability indices: Langelier saturation index (LSI), Ryznar stability index (RSI), Aggressive index (AI), Learson-Skold index (Ls) and Puckorius scaling index (PSI). The dataset classified groundwater as polluted and this indicates that the water is not safe for domestic, agricultural and industrial usage and will need further treatment. This dataset is beneficial for policymakers, and researchers in the field of water purification, quality management and in preventing the economic and safety concerns related to corrosion and scaling of groundwater.
A Single Chip Automotive Control LSI Using SOI Bipolar Complimentary MOS Double-Diffused MOS
NASA Astrophysics Data System (ADS)
Kawamoto, Kazunori; Mizuno, Shoji; Abe, Hirofumi; Higuchi, Yasushi; Ishihara, Hideaki; Fukumoto, Harutsugu; Watanabe, Takamoto; Fujino, Seiji; Shirakawa, Isao
2001-04-01
Using the example of an air bag controller, a single chip solution for automotive sub-control systems is investigated, by using a technological combination of improved circuits, bipolar complimentary metal oxide silicon double-diffused metal oxide silicon (BiCDMOS) and thick silicon on insulator (SOI). For circuits, an automotive specific reduced instruction set computer (RISC) center processing unit (CPU), and a novel, all integrated system clock generator, dividing digital phase-locked loop (DDPLL) are proposed. For the device technologies, the authors use SOI-BiCDMOS with trench dielectric-isolation (TD) which enables integration of various devices in an integrated circuit (IC) while avoiding parasitic miss operations by ideal isolation. The structures of the SOI layer and TD, are optimized for obtaining desired device characteristics and high electromagnetic interference (EMI) immunity. While performing all the air bag system functions over a wide range of supply voltage, and ambient temperature, the resulting single chip reduces the electronic parts to about a half of those in the conventional air bags. The combination of single chip oriented circuits and thick SOI-BiCDMOS technologies offered in this work is valuable for size reduction and improved reliability of automotive electronic control units (ECUs).
Abbasnia, Abbas; Alimohammadi, Mahmood; Mahvi, Amir Hossein; Nabizadeh, Ramin; Yousefi, Mahmood; Mohammadi, Ali Akbar; Pasalari, Hassan; Mirzabeigi, Majid
2018-02-01
The aims of this study were to assess and analysis of drinking water quality of Chabahar villages in Sistan and Baluchistan province by water quality index (WQI) and to investigate the water stability in subjected area. The results illustrated that the average values of LSI, RSI, PSI, LS, and AI was 0.5 (±0.34), 6.76 (±0.6), 6.50 (±0.99), 2.71 (±1.59), and 12.63 (±0.34), respectively. The calculation of WQI for groundwater samples indicated that 25% of the samples could be considered as excellent water, 50% of the samples were classified as good water category and 25% of the samples showed poor water category.
77 FR 23277 - Proposed Leasehold Surrender Interest Guide
Federal Register 2010, 2011, 2012, 2013, 2014
2012-04-18
... Harvey, Asset Management Branch Chief, 202-513-7150. Before including your address, phone number, email... Management Improvement Act of 1998 (Pub. L. 105-391; 36 CFR part 51), the proposed LSI Guide provides...
Rice, Tyler B; Kwan, Elliott; Hayakawa, Carole K; Durkin, Anthony J; Choi, Bernard; Tromberg, Bruce J
2013-01-01
Laser Speckle Imaging (LSI) is a simple, noninvasive technique for rapid imaging of particle motion in scattering media such as biological tissue. LSI is generally used to derive a qualitative index of relative blood flow due to unknown impact from several variables that affect speckle contrast. These variables may include optical absorption and scattering coefficients, multi-layer dynamics including static, non-ergodic regions, and systematic effects such as laser coherence length. In order to account for these effects and move toward quantitative, depth-resolved LSI, we have developed a method that combines Monte Carlo modeling, multi-exposure speckle imaging (MESI), spatial frequency domain imaging (SFDI), and careful instrument calibration. Monte Carlo models were used to generate total and layer-specific fractional momentum transfer distributions. This information was used to predict speckle contrast as a function of exposure time, spatial frequency, layer thickness, and layer dynamics. To verify with experimental data, controlled phantom experiments with characteristic tissue optical properties were performed using a structured light speckle imaging system. Three main geometries were explored: 1) diffusive dynamic layer beneath a static layer, 2) static layer beneath a diffuse dynamic layer, and 3) directed flow (tube) submerged in a dynamic scattering layer. Data fits were performed using the Monte Carlo model, which accurately reconstructed the type of particle flow (diffusive or directed) in each layer, the layer thickness, and absolute flow speeds to within 15% or better.
SEM analysis of ionizing radiation effects in an analog to digital converter /AD571/
NASA Technical Reports Server (NTRS)
Gauthier, M. K.; Perret, J.; Evans, K. C.
1981-01-01
The considered investigation is concerned with the study of the total-dose degradation mechanisms in an IIL analog to digital (A/D) converter. The A/D converter is a 10 digit device having nine separate functional units on the chip which encompass several hundred transistors and circuit elements. It was the objective of the described research to find the radiation sensitive elements by a systematic search of the devices on the LSI chip. The employed technique using a scanning electron microscope to determine the functional blocks of an integrated circuit which are sensitive to ionizing radiation and then progressively zeroing in on the soft components within those blocks, proved extremely successful on the AD571. Four functional blocks were found to be sensitive to radiation, including the Voltage Reference, DAC, IIL Clock, and IIL SAR.
Distributed asynchronous microprocessor architectures in fault tolerant integrated flight systems
NASA Technical Reports Server (NTRS)
Dunn, W. R.
1983-01-01
The paper discusses the implementation of fault tolerant digital flight control and navigation systems for rotorcraft application. It is shown that in implementing fault tolerance at the systems level using advanced LSI/VLSI technology, aircraft physical layout and flight systems requirements tend to define a system architecture of distributed, asynchronous microprocessors in which fault tolerance can be achieved locally through hardware redundancy and/or globally through application of analytical redundancy. The effects of asynchronism on the execution of dynamic flight software is discussed. It is shown that if the asynchronous microprocessors have knowledge of time, these errors can be significantly reduced through appropiate modifications of the flight software. Finally, the papear extends previous work to show that through the combined use of time referencing and stable flight algorithms, individual microprocessors can be configured to autonomously tolerate intermittent faults.
Holocene climatic fluctuations and periodic changes in the Asian southwest monsoon region
NASA Astrophysics Data System (ADS)
Zhang, Wenxiang; Niu, Jie; Ming, Qingzhong; Shi, Zhengtao; Lei, Guoliang; Huang, Linpei; Long, Xian'e.; Chang, Fengqin
2018-05-01
Climatic changes in the Asian southwest monsoon (ASWM) during the Holocene have become a topic of recent studies. It is important to understand the patterns and causes of Holocene climatic changes and their relationship with global changes. Based on the climate proxies and wavelet analysis of Lugu Lake in the ASWM region, the climatic fluctuations and periodic changes in the ASWM region during the Holocene have been reconstructed with a high-precision chronology. The results indicate the intensification of ASWM began to increase with Northern Hemisphere low-latitude solar insolation (LSI) and solar activity during the early Holocene, and gradually decreased during the late Holocene, exhibiting an apparent synchrony with numerous records of ASWM region. Meanwhile, an apparent 1000-a quasi-periodic signal is present in the environment proxies, and it demonstrates that the environmental change in the ASWM region has been driven mainly by LSI and solar activity.
Relationships among condition indices, feeding and growth of walleye in Lake Erie
Hartman, K.J.; Margraf, F.J.
2006-01-01
Condition indices are often used as surrogates of fish health, growth, and feeding and to compare ecological well-being among fish populations. In an effort to identify easily measured indices, growth and food consumption were compared with gonadal-somatic index, liver-somatic index (LSI), fat-somatic index and relative weight (Wr) for ages 1-3 walleye, Sander vitreus (Mitchill), in Lake Erie from 1986 to 1988. The LSI and Wr were significantly correlated with growth rate or food consumption, but correlations were too small to be considered biologically meaningful. Furthermore, no consistent relationships between condition indices and growth or consumption were found among combinations of fish age and season. None of the indices are considered reliable surrogates for more laborious estimates of growth and food consumption for Lake Erie walleye. Significant relationships between Wr and relative abundance of key prey species warrant further investigation. ?? 2006 Blackwell Publishing Ltd.
NASA Astrophysics Data System (ADS)
Liu, Ke; Wang, Jiannian; Wang, Hai; Li, Yanqiu
2018-07-01
For the multi-lateral shearing interferometers (multi-LSIs), the measurement accuracy can be enhanced by estimating the wavefront under test with the multidirectional phase information encoded in the shearing interferogram. Usually the multi-LSIs reconstruct the test wavefront from the phase derivatives in multiple directions using the discrete Fourier transforms (DFT) method, which is only suitable to small shear ratios and relatively sensitive to noise. To improve the accuracy of multi-LSIs, wavefront reconstruction from the multidirectional phase differences using the difference Zernike polynomials fitting (DZPF) method is proposed in this paper. For the DZPF method applied in the quadriwave LSI, difference Zernike polynomials in only two orthogonal shear directions are required to represent the phase differences in multiple shear directions. In this way, the test wavefront can be reconstructed from the phase differences in multiple shear directions using a noise-variance weighted least-squares method with almost no extra computational burden, compared with the usual recovery from the phase differences in two orthogonal directions. Numerical simulation results show that the DZPF method can maintain high reconstruction accuracy in a wider range of shear ratios and has much better anti-noise performance than the DFT method. A null test experiment of the quadriwave LSI has been conducted and the experimental results show that the measurement accuracy of the quadriwave LSI can be improved from 0.0054 λ rms to 0.0029 λ rms (λ = 632.8 nm) by substituting the DFT method with the proposed DZPF method in the wavefront reconstruction process.
The Use of Social Media to Recruit Participants With Rare Conditions: Lynch Syndrome as an Example
Parker, Wendy M; Hennig, Kelsey; Sisson, Faith; Bruzzone, Linda L
2017-01-01
Background Social media is increasingly being used as a means of recruiting participants, particularly for investigators whose areas of interest involve rare conditions or hard-to-reach populations. However, much of the literature to date has focused on paid advertisement recruitment. Objective We used Lynch syndrome (LS), a rare hereditary cancer syndrome, as a model to demonstrate the successful partnership between researchers and a Web-based patient education and advocacy organization to facilitate participant recruitment. Methods Recruitment was undertaken in partnership with Lynch Syndrome International (LSI), an advocacy organization with a strong social media presence. After LSI published our study information, participants followed up via email or phone call. Following prescreening and consent, interested and eligible participants were then sent a secure survey link. Results Within 36 hours of a single Facebook post by the site administrators for LSI, over 150 individuals responded via phone or email. Sixty-five individuals were sent the survey link and 57 individuals completed the survey (88% response rate). Of note, these 57 individuals were geographically diverse within the Unites States, representing LS patients from 26 different states. Conclusions This approach has several advantages, including recruitment through a trusted source outside of a clinical setting, higher response rates, and cost-effectiveness with a small research team in a relatively short amount of time. Overall, social media recruitment with a trusted online partner can be highly effective in hard-to-reach clinical populations, such as patients with LS. However, this approach requires additional effort for eligibility screening. PMID:28115298
Cui, Han; Chen, Yi; Zhong, Weizheng; Yu, Haibo; Li, Zhifeng; He, Yuhai; Yu, Wenlong; Jin, Lei
2016-01-01
Bell's palsy is a kind of peripheral neural disease that cause abrupt onset of unilateral facial weakness. In the pathologic study, it was evidenced that ischemia of facial nerve at the affected side of face existed in Bell's palsy patients. Since the direction of facial nerve blood flow is primarily proximal to distal, facial skin microcirculation would also be affected after the onset of Bell's palsy. Therefore, monitoring the full area of facial skin microcirculation would help to identify the condition of Bell's palsy patients. In this study, a non-invasive, real time and full field imaging technology - laser speckle imaging (LSI) technology was applied for measuring facial skin blood perfusion distribution of Bell's palsy patients. 85 participants with different stage of Bell's palsy were included. Results showed that Bell's palsy patients' facial skin perfusion of affected side was lower than that of the normal side at the region of eyelid, and that the asymmetric distribution of the facial skin perfusion between two sides of eyelid is positively related to the stage of the disease (P < 0.001). During the recovery, the perfusion of affected side of eyelid was increasing to nearly the same with the normal side. This study was a novel application of LSI in evaluating the facial skin perfusion of Bell's palsy patients, and we discovered that the facial skin blood perfusion could reflect the stage of Bell's palsy, which suggested that microcirculation should be investigated in patients with this neurological deficit. It was also suggested LSI as potential diagnostic tool for Bell's palsy.
NASA Astrophysics Data System (ADS)
Agawa, Kenichi; Ishizuka, Shinichiro; Majima, Hideaki; Kobayashi, Hiroyuki; Koizumi, Masayuki; Nagano, Takeshi; Arai, Makoto; Shimizu, Yutaka; Maki, Asuka; Urakawa, Go; Terada, Tadashi; Itoh, Nobuyuki; Hamada, Mototsugu; Fujii, Fumie; Kato, Tadamasa; Yoshitomi, Sadayuki; Otsuka, Nobuaki
A 2.4GHz 0.13µm CMOS transceiver LSI, supporting Bluetooth V2.1 + enhanced data rate (EDR) standard, has achieved a high reception sensitivity and high-quality transmission signals between -40°C and +90°C. A low-IF receiver and direct-conversion transmitter architecture are employed. A temperature compensated receiver chain including a low-noise amplifier accomplishes a sensitivity of -90dBm at frequency shift keying modulation even in the worst environmental condition. Design optimization of phase noise in a local oscillator and linearity of a power amplifier improves transmission signals and enables them to meet Bluetooth radio specifications. Fabrication in scaled 0.13µm CMOS and operation at a low supply voltage of 1.5V result in small area and low power consumption.
NASA Astrophysics Data System (ADS)
The subjects discussed are related to LSI/VLSI based subscriber transmission and customer access for the Integrated Services Digital Network (ISDN), special applications of fiber optics, ISDN and competitive telecommunication services, technical preparations for the Geostationary-Satellite Orbit Conference, high-capacity statistical switching fabrics, networking and distributed systems software, adaptive arrays and cancelers, synchronization and tracking, speech processing, advances in communication terminals, full-color videotex, and a performance analysis of protocols. Advances in data communications are considered along with transmission network plans and progress, direct broadcast satellite systems, packet radio system aspects, radio-new and developing technologies and applications, the management of software quality, and Open Systems Interconnection (OSI) aspects of telematic services. Attention is given to personal computers and OSI, the role of software reliability measurement in information systems, and an active array antenna for the next-generation direct broadcast satellite.
NASA Astrophysics Data System (ADS)
Saint-Jalmes, Hervé; Barjhoux, Yves
1982-01-01
We present a 10 line-7 MHz timing generator built on a single board around two LSI timer chips interfaced to a 16-bit microcomputer. Once programmed from the host computer, this device is able to generate elaborate logic sequences on its 10 output lines without further interventions from the CPU. Powerful architecture introduces new possibilities over conventional memory-based timing simulators and word generators. Loop control on a given sequence of events, loop nesting, and various logic combinations can easily be implemented through a software interface, using a symbolic command language. Typical applications of such a device range from development, emulation, and test of integrated circuits, circuit boards, and communication systems to pulse-controlled instrumentation (radar, ultrasonic systems). A particular application to a pulsed Nuclear Magnetic Resonance (NMR) spectrometer is presented, along with customization of the device for generating four-channel radio-frequency pulses and the necessary sequence for subsequent data acquisition.
The revolution in data gathering systems. [mini and microcomputers in NASA wind tunnels
NASA Technical Reports Server (NTRS)
Cambra, J. M.; Trover, W. F.
1975-01-01
This paper gives a review of the data-acquisition systems used in NASA's wind tunnels from the 1950's to the present as a basis for assessing the impact of minicomputers and microcomputers on data acquisition and processing. The operation and disadvantages of wind-tunnel data systems are summarized for the period before 1950, the early 1950's, the early and late 1960's, and the early 1970's. Some significant advances discussed include the use or development of solid-state components, minicomputer systems, large central computers, on-line data processing, autoranging DC amplifiers, MOS-FET multiplexers, MSI and LSI logic, computer-controlled programmable amplifiers, solid-state remote multiplexing, integrated circuits, and microprocessors. The distributed system currently in use with the 40-ft by 80-ft wind tunnel at Ames Research Center is described in detail. The expected employment of distributed systems and microprocessors in the next decade is noted.
Antisubmarine Warfare (ASW) Lexicon
1990-01-01
Communications Satellite CRT Cathode Ray Tube COMNAVSURFLANT Commander, CS Combat System; Computer Subsystem Naval Surface Force, U.S. Atlantic Fleet CSA Close...Sideband Low-Frequency Acoustic Vernier Analyzer LSD Large Screen Display LC Launch Control LSI Low Ship Impact 24 LSNSR Line-of-Bearing Sensor NCA
NASA Technical Reports Server (NTRS)
Pitts, E. R.
1976-01-01
The DJANAL (DisJunct ANALyzer) Program provides a means for the LSI designer to format output from the Mask Analysis Program (MAP) for input to the FETLOG (FETSIM/LOGSIM) processor. This document presents a brief description of the operation of DJANAL and provides comprehensive instruction for its use.
Radiation Characteristics of a 0.11 Micrometer Modified Commercial CMOS Process
NASA Technical Reports Server (NTRS)
Poivey, Christian; Kim, Hak; Berg, Melanie D.; Forney, Jim; Seidleck, Christina; Vilchis, Miguel A.; Phan, Anthony; Irwin, Tim; LaBel, Kenneth A.; Saigusa, Rajan K.;
2006-01-01
We present radiation data, Total Ionizing Dose and Single Event Effects, on the LSI Logic 0.11 micron commercial process and two modified versions of this process. Modified versions include a buried layer to guarantee Single Event Latchup immunity.
Hip Strength in Patients with Quadriceps Strength Deficits after ACL Reconstruction.
Bell, David R; Trigsted, Stephanie M; Post, Eric G; Walden, Courtney E
2016-10-01
Quadriceps strength deficits persist for years after anterior cruciate ligament (ACL) reconstruction, and patients with these deficits often shift torque demands away from the knee extensors to the hip during functional tasks. However, it is not clear how quadriceps strength deficits may affect hip strength. Therefore, the purpose of this study was to investigate differences in lower extremity strength in individuals with ACL reconstruction with differing levels of quadriceps strength asymmetry. Isometric strength was recorded bilaterally in 135 participants (73 control and 62 with unilateral ACL reconstruction, time from surgery = 30.9 ± 17.6 months) from the knee extensors and flexors, hip extensors and abductors, and hip internal and external rotator muscle groups. Symmetry indices (limb symmetry index (LSI)) were created based on quadriceps strength, and subjects with ACL reconstruction were subdivided (high quadriceps (LSI ≥ 90%), n = 37; low quadriceps (LSI < 85%), n = 18). Individual group (control vs high quadriceps vs low quadriceps) by limb (reconstructed/nondominant vs healthy/dominant) repeated-measures ANOVA was used to compare strength (%BW) for each of the six joint motions of interest (knee extensors/flexors, hip abductors/extensors/external, and internal rotators) while controlling for time from surgery. An interaction was observed for quadriceps strength (P < 0.001), and the reconstructed limb in the low quadriceps group was weaker than all other limbs. A main effect for group was observed with the low quadriceps group having greater hip extension (P = 0.007) strength in both limbs compared with the other groups. Knee flexion strength was weaker in the reconstructed limb of the high quadriceps group (P = 0.047) compared with all other groups and limbs. Individuals with ACL reconstruction and involved limb quadriceps weakness have greater hip extension strength in both limbs compared with patients with bilateral strength symmetry and controls.
The Use of Social Media to Recruit Participants With Rare Conditions: Lynch Syndrome as an Example.
Burton-Chase, Allison M; Parker, Wendy M; Hennig, Kelsey; Sisson, Faith; Bruzzone, Linda L
2017-01-23
Social media is increasingly being used as a means of recruiting participants, particularly for investigators whose areas of interest involve rare conditions or hard-to-reach populations. However, much of the literature to date has focused on paid advertisement recruitment. We used Lynch syndrome (LS), a rare hereditary cancer syndrome, as a model to demonstrate the successful partnership between researchers and a Web-based patient education and advocacy organization to facilitate participant recruitment. Recruitment was undertaken in partnership with Lynch Syndrome International (LSI), an advocacy organization with a strong social media presence. After LSI published our study information, participants followed up via email or phone call. Following prescreening and consent, interested and eligible participants were then sent a secure survey link. Within 36 hours of a single Facebook post by the site administrators for LSI, over 150 individuals responded via phone or email. Sixty-five individuals were sent the survey link and 57 individuals completed the survey (88% response rate). Of note, these 57 individuals were geographically diverse within the Unites States, representing LS patients from 26 different states. This approach has several advantages, including recruitment through a trusted source outside of a clinical setting, higher response rates, and cost-effectiveness with a small research team in a relatively short amount of time. Overall, social media recruitment with a trusted online partner can be highly effective in hard-to-reach clinical populations, such as patients with LS. However, this approach requires additional effort for eligibility screening. ©Allison M Burton-Chase, Wendy M Parker, Kelsey Hennig, Faith Sisson, Linda L Bruzzone. Originally published in JMIR Research Protocols (http://www.researchprotocols.org), 23.01.2017.
Functional cohesion of gene sets determined by latent semantic indexing of PubMed abstracts.
Xu, Lijing; Furlotte, Nicholas; Lin, Yunyue; Heinrich, Kevin; Berry, Michael W; George, Ebenezer O; Homayouni, Ramin
2011-04-14
High-throughput genomic technologies enable researchers to identify genes that are co-regulated with respect to specific experimental conditions. Numerous statistical approaches have been developed to identify differentially expressed genes. Because each approach can produce distinct gene sets, it is difficult for biologists to determine which statistical approach yields biologically relevant gene sets and is appropriate for their study. To address this issue, we implemented Latent Semantic Indexing (LSI) to determine the functional coherence of gene sets. An LSI model was built using over 1 million Medline abstracts for over 20,000 mouse and human genes annotated in Entrez Gene. The gene-to-gene LSI-derived similarities were used to calculate a literature cohesion p-value (LPv) for a given gene set using a Fisher's exact test. We tested this method against genes in more than 6,000 functional pathways annotated in Gene Ontology (GO) and found that approximately 75% of gene sets in GO biological process category and 90% of the gene sets in GO molecular function and cellular component categories were functionally cohesive (LPv<0.05). These results indicate that the LPv methodology is both robust and accurate. Application of this method to previously published microarray datasets demonstrated that LPv can be helpful in selecting the appropriate feature extraction methods. To enable real-time calculation of LPv for mouse or human gene sets, we developed a web tool called Gene-set Cohesion Analysis Tool (GCAT). GCAT can complement other gene set enrichment approaches by determining the overall functional cohesion of data sets, taking into account both explicit and implicit gene interactions reported in the biomedical literature. GCAT is freely available at http://binf1.memphis.edu/gcat.
Ren, Jie; Li, Pengcheng; Zhao, Hongyou; Chen, Defu; Zhen, Jie; Wang, Ying; Wang, Yucheng; Gu, Ying
2014-03-01
The occlusion effect of vascular targeted photodynamic therapy (V-PDT) for malformed vessels in port wine stains (PWS) often last for some time after the treatment. A relatively longer period after V-PDT is needed to accurately assess the final response of PWS microcirculation to the treatment. In this study, we intended to use laser speckle imaging (LSI) to assess the tissue perfusion changes of PWS at follow-up after V-PDT and preliminarily analyze the relationship between perfusion change and color bleaching. Seventeen patients with 40 PWS lesions were scanned by LSI before and 3-6 months after they received V-PDT. The speckle flow indices of PWS lesions and normal skin before and at follow-up after V-PDT were recorded. We also performed analyses on the correlation between perfusion changes and color bleaching. Before V-PDT, the 40 PWS lesions showed higher perfusion than the normal skin (1,421 ± 463 and 1,115 ± 386 perfusion unit (PU), respectively, P < 0.01). The PWS lesions scanned at follow-up showed decreased perfusion level compared to the preoperative values (1,282 ± 460 and 1,421 ± 463 PU, respectively, P < 0.01). After V-PDT, the perfusion change rates coincide well with the color bleaching rates (correlation coefficient, 0.73). In conclusion, the LSI system is capable of imaging PWS perfusion precisely, and it has shown promising results in assessing the changes of tissue perfusion of V-PDT for PWS, with objective and quantitative data, real-time images, and a shorter detection time. It may also provide an effectiveness assessment method for the treatment of PWS.
NASA Astrophysics Data System (ADS)
Abookasis, David; Moshe, Tomer
2014-11-01
This paper demonstrates the insertion of lens array in the front of a CCD camera in a laser speckle imaging (LSI) like-technique to acquire multiple speckle reflectance projections for imaging blood flow in an intact biological tissue. In some of LSI applications, flow imaging is obtained by thinning or removing of the upper tissue layers to access blood vessels. In contrast, with the proposed approach flow imaging can be achieved while the tissue is intact. In the system, each lens from an hexagonal lens array observed the sample from slightly different perspectives and captured with a CCD camera. In the computer, these multiview raw images are converted to speckled contrast maps. Then, a self-deconvolution shift-and-add algorithm is employed for processing yields high contrast flow information. The method is experimentally validated first with a plastic tube filled with scattering liquid running at different controlled flow rates hidden in a biological tissue and then extensively tested for imaging of cerebral blood flow in an intact rodent head experience different conditions. A total of fifteen mice were used in the experiments divided randomly into three groups as follows: Group 1 (n=5) consisted of injured mice experience hypoxic ischemic brain injury monitored for ~40 min. Group 2 (n=5) injured mice experience anoxic brain injury monitored up to 20 min. Group 3 (n=5) experience functional activation monitored up to ~35 min. To increase tissue transparency and the penetration depth of photons through head tissue layers, an optical clearing method was employed. To our knowledge, this work presents for the first time the use of lens array in LSI scheme.
Jin, Shengyu; Wang, Yixiu; Motlag, Maithilee; Gao, Shengjie; Xu, Jin; Nian, Qiong; Wu, Wenzhuo; Cheng, Gary J
2018-03-01
Ongoing efforts in triboelectric nanogenerators (TENGs) focus on enhancing power generation, but obstacles concerning the economical and cost-effective production of TENGs continue to prevail. Micro-/nanostructure engineering of polymer surfaces has been dominantly utilized for boosting the contact triboelectrification, with deposited metal electrodes for collecting the scavenged energy. Nevertheless, this state-of-the-art approach is limited by the vague potential for producing 3D hierarchical surface structures with conformable coverage of high-quality metal. Laser-shock imprinting (LSI) is emerging as a potentially scalable approach for directly surface patterning of a wide range of metals with 3D nanoscale structures by design, benefiting from the ultrahigh-strain-rate forming process. Here, a TENG device is demonstrated with LSI-processed biomimetic hierarchically structured metal electrodes for efficient harvesting of water-drop energy in the environment. Mimicking and transferring hierarchical microstructures from natural templates, such as leaves, into these water-TENG devices is effective regarding repelling water drops from the device surface, since surface hydrophobicity from these biomicrostructures maximizes the TENG output. Among various leaves' microstructures, hierarchical microstructures from dried bamboo leaves are preferable regarding maximizing power output, which is attributed to their unique structures, containing both dense nanostructures and microscale features, compared with other types of leaves. Also, the triboelectric output is significantly improved by closely mimicking the hydrophobic nature of the leaves in the LSI-processed metal surface after functionalizing it with low-surface-energy self-assembled-monolayers. The approach opens doors to new manufacturable TENG technologies for economically feasible and ecologically friendly production of functional devices with directly patterned 3D biomimic metallic surfaces in energy, electronics, and sensor applications. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Mothering occupations when parenting children with feeding concerns: a mixed methods study.
Winston, Kristin A; Dunbar, Sandra B; Reed, Carol N; Francis-Connolly, Elizabeth
2010-06-01
The occupations of mothering have gained attention in occupation-based research and literature; however, many aspects of mothering remain unexplored. PURPOSE; The purpose of this study was to gain insight into mothers' perceptions of their occupations when mothering a child with feeding difficulties. Study design used mixed methodology utilizing the Parental Stress Scale (PSS), Life Satisfaction Index for Parents (LSI-P), and phenomenological interviews. Comparison of the datasets illuminated the quantitative findings with the words of the women interviewed. Although there was only one statistically significant finding in the quantitative data in terms of satisfaction with leisure and recreation, the qualitative data provided rich descriptions of mothers' perceptions of stress and life satisfaction. Mixed methods data analysis revealed the complex nature of the interaction between mothering occupations and mothering a child with feeding concerns as well as how these concerns might influence occupational therapy practice.
Unitary Operators on the Document Space.
ERIC Educational Resources Information Center
Hoenkamp, Eduard
2003-01-01
Discusses latent semantic indexing (LSI) that would allow search engines to reduce the dimension of the document space by mapping it into a space spanned by conceptual indices. Topics include vector space models; singular value decomposition (SVD); unitary operators; the Haar transform; and new algorithms. (Author/LRW)
Functional laser speckle imaging of cerebral blood flow under hypothermia
NASA Astrophysics Data System (ADS)
Li, Minheng; Miao, Peng; Zhu, Yisheng; Tong, Shanbao
2011-08-01
Hypothermia can unintentionally occur in daily life, e.g., in cardiovascular surgery or applied as therapeutics in the neurosciences critical care unit. So far, the temperature-induced spatiotemporal responses of the neural function have not been fully understood. In this study, we investigated the functional change in cerebral blood flow (CBF), accompanied with neuronal activation, by laser speckle imaging (LSI) during hypothermia. Laser speckle images from Sprague-Dawley rats (n = 8, male) were acquired under normothermia (37°C) and moderate hypothermia (32°C). For each animal, 10 trials of electrical hindpaw stimulation were delivered under both temperatures. Using registered laser speckle contrast analysis and temporal clustering analysis (TCA), we found a delayed response peak and a prolonged response window under hypothermia. Hypothermia also decreased the activation area and the amplitude of the peak CBF. The combination of LSI and TCA is a high-resolution functional imaging method to investigate the spatiotemporal neurovascular coupling in both normal and pathological brain functions.
Fredette, Jenna; O'Brien, Corinne; Poole, Christy; Nomura, Jason
2015-04-01
Experiential learning theory and the Kolb Learning Style Inventory (Kolb LSI) have influenced educators worldwide for decades. Knowledge of learning styles can create efficient learning environments, increase information retention, and improve learner satisfaction. Learning styles have been examined in medicine previously, but not specifically with Emergency Medicine (EM) residents and attendings. Using the Kolb LSI, the learning styles of Emergency Medicine residents and attendings were assessed. The findings showed that the majority of EM residents and attendings shared the accommodating learning style. This result was different than prior studies that found the majority of medical professionals had a converging learning style and other studies that found attendings often have different learning styles than residents. The issue of learning styles among emergency medical residents and attendings is important because learning style knowledge may have an impact on how a residency program structures curriculum and how EM residents are successfully, efficiently, and creatively educated.
Design, processing, and testing of lsi arrays for space station
NASA Technical Reports Server (NTRS)
Lile, W. R.; Hollingsworth, R. J.
1972-01-01
The design of a MOS 256-bit Random Access Memory (RAM) is discussed. Technological achievements comprise computer simulations that accurately predict performance; aluminum-gate COS/MOS devices including a 256-bit RAM with current sensing; and a silicon-gate process that is being used in the construction of a 256-bit RAM with voltage sensing. The Si-gate process increases speed by reducing the overlap capacitance between gate and source-drain, thus reducing the crossover capacitance and allowing shorter interconnections. The design of a Si-gate RAM, which is pin-for-pin compatible with an RCA bulk silicon COS/MOS memory (type TA 5974), is discussed in full. The Integrated Circuit Tester (ICT) is limited to dc evaluation, but the diagnostics and data collecting are under computer control. The Silicon-on-Sapphire Memory Evaluator (SOS-ME, previously called SOS Memory Exerciser) measures power supply drain and performs a minimum number of tests to establish operation of the memory devices. The Macrodata MD-100 is a microprogrammable tester which has capabilities of extensive testing at speeds up to 5 MHz. Beam-lead technology was successfully integrated with SOS technology to make a simple device with beam leads. This device and the scribing are discussed.
GaAs integrated circuits and heterojunction devices
NASA Astrophysics Data System (ADS)
Fowlis, Colin
1986-06-01
The state of the art of GaAs technology in the U.S. as it applies to digital and analog integrated circuits is examined. In a market projection, it is noted that whereas analog ICs now largely dominate the market, in 1994 they will amount to only 39 percent vs. 57 percent for digital ICs. The military segment of the market will remain the largest (42 percent in 1994 vs. 70 percent today). ICs using depletion-mode-only FETs can be constructed in various forms, the closest to production being BFL or buffered FET logic. Schottky diode FET logic - a lower power approach - can reach higher complexities and strong efforts are being made in this direction. Enhancement type devices appear essential to reach LSI and VLSI complexity, but process control is still very difficult; strong efforts are under way, both in the U.S. and in Japan. Heterojunction devices appear very promising, although structures are fairly complex, and special fabrication techniques, such as molecular beam epitaxy and MOCVD, are necessary. High-electron-mobility-transistor (HEMT) devices show significant performance advantages over MESFETs at low temperatures. Initial results of heterojunction bipolar transistor devices show promise for high speed A/D converter applications.
Experiential Education: Enhancing the Liberal Arts Curriculum
ERIC Educational Resources Information Center
Graff, Elissa R.
2013-01-01
This mixed-methods study combined a survey instrument, the Learning Style Inventory (LSI), with a selected group of follow-up interviews for the purpose of determining how experiential practices affected student engagement and learning. Quantitative data analysis established students' preferences for more active involvement in learning practices…
The School Dropout: Implications for Counselors.
ERIC Educational Resources Information Center
Gadwa, Karol; Griggs, Shirley A.
1985-01-01
Assessed learning style of secondary students, categorized as dropout (N=345), alternative (N=214), or traditional students (N=213) using the Learning Style Inventory (LSI). The groups were differentiated on 17 of 23 variables, with dropouts being motivated, peer and teacher oriented, easily bored, preferring evening for learning, preferring…
A Survey of European Robotics Research.
1984-01-27
laboratory had an ASEA est in robotics began with kinetic robot, several machines for automatic sculpture design. He was looking at the forging, and an LSI 11...developed several tools which Davies had constructed two- and three- eased the programming of the ASEA robot. degrees-of-freedom hydraulic manipula
2008-04-11
Lunar Science Institute (LSI) Grand Opening. Ribbon Cutting, L-R: James Green, Director, Planetary Programs, NASA Headquarters, Mike Honda, U.S. Congressman,15th District, Apollo Astronaut Buzz Aldrin, S. Pete Worden, Director, NASA Ames Research Center, David Morrison, Interiu Director, NASA Lunar Science Institute. David Morse at podium.
NASA Astrophysics Data System (ADS)
Hamann, Christopher; Hecht, Lutz; Ebert, Matthias; Wirth, Richard
2013-11-01
Impact glasses are usually strongly affected by secondary alteration and chemical weathering. Thus, in order to understand relevant formation processes, detailed petrographic studies on unweathered impact glasses are necessary as preserved heterogeneities in quenched impact glasses may serve as a tool to better understand their genesis. Here, we report on petrography and microchemistry of impact glasses from the Wabar impact craters (Saudi Arabia) that, with an age of ∼300 years, are among the youngest terrestrial impact craters. The fact that parts of the IIIAB iron meteorite have survived impact and subsequent weathering is granting Wabar a special role among the presently 184 confirmed terrestrial impact structures. Electron microprobe analysis (EMPA) and transmission electron microscopy (TEM) obtained on the black impact melt/glass variety at Wabar suggest that meteoritic Fe was selectively mixed with high-silica target melt at high temperatures due to selective oxidation, resulting in high Fe/Ni ratios for the black melt (37 on average, individual values range from 13 to 449) and low Fe/Ni ratios for projectile droplets ("FeNi spheres" with a Fe/Ni ratio of 3 on average; Fe/Ni ratio for the meteorite is ∼12). The black melt shows emulsion textures that are the result of silicate liquid immiscibility. Liquid-liquid phase-separation resulted in the formation of a poorly polymerized, ultrabasic melt (Lfe) rich in divalent cations like Fe2+, Ca2+, or Mg2+, that is dispersed in a highly polymerized, high-silica melt (Lsi) matrix. The typical Wabar black melt emulsion displays a spheres-in-a-matrix texture of ∼10-20% Lfe homogeneously dispersed in the form of two sets of spheres and droplets (10-30 nm and 0.1-0.4 μm in diameter) in ∼80-90% Lsi matrix, plus occasionally disseminated FeNi spheres. Around large (>10 μm) FeNi spheres, however, the typical emulsion texture changes to ∼21% Lsi dispersed in ∼79% Lfe. This change of texture is interpreted as evidence for the transfer of meteoritic Fe from the meteoritic FeNi spheres into the target melt due to selective oxidation of Fe over Ni and Co. Variations in the bulk composition of Wabar black melt largely depend on the volume ratios between immiscible ultrabasic Lfe, felsic Lsi, and remains of meteoritic FeNi spheres. Based on natural occurrences of phase-separated glasses (this work and literature) and quenching experiments (literature), there is growing evidence that liquid immiscibility is a major process in the formation of glassy impactites.
The Snowball Blizzard Incident: A Reality Rub Life Space Interview.
ERIC Educational Resources Information Center
Long, Nicholas J.; Pinciotti, Dennis
1992-01-01
Focuses on Reality Rub Interview, one type of Life Space Interview (LSI), effective intervention strategy for use during crisis work with troubled students. Presents actual Reality Rub Interview, used with students who have "social blindness, social myopia, and tunnel vision" and who, when upset, misinterpret words and behaviors of…
Perceptions of the Training Needs of the Newest Members of the Extension Family
ERIC Educational Resources Information Center
Bruce, Jacklyn A.; Anderson, Jessica
2012-01-01
The study reported here investigated the perceived importance and proficiency of leadership skills to new North Carolina Cooperative Extension agents. The researchers utilized a Web-based survey questionnaire that incorporated Leadership Skills Inventory (LSI) developed by Jones (2006). According to Moore (2003), the leadership skills are…
Reframing Reality: Christmas at the Mall.
ERIC Educational Resources Information Center
Long, Nicholas J.; Daniels, Doug
1993-01-01
Presents Life Space Interview (LSI), effective intervention strategy for use during crisis work with troubled students, as it was applied to case of eight-year-old boy attending Option III class for emotionally handicapped students when he accompanied class to mall for holiday shopping trip. Following interview are instructional comments on the…
Problems and Inconsistencies with Kolb's Learning Styles.
ERIC Educational Resources Information Center
Garner, Iain
2000-01-01
Argues that there are substantial problems with the theoretical foundations of David Kolb's Learning Style Inventory (LSI). Notes anomalies with the relationship between Carl Jung's style and Kolb's use of possibility processing. Argues that these anomalies make it impossible for defining firm conclusions about the nature of Kolb's learning style.…
Optical Computing 88. Book of Summaries. August 29 - September 2, 1988.
1988-09-02
useveravlabW le.faomputpaeconsiof alineaavalaachpidode array driving anOff c1iP etsuaialdreetiama shift regste. 7M two suell.chamasl acoso *optc devices...LSI), automated systems have been demanded for the inspection of patterned wafers to replace the time-consuming and pains taking labor work. The
Managing Parallelism and Resources in Scientific Dataflow Programs
1990-03-01
1983. [52] K. Hiraki , K. Nishida, S. Sekiguchi, and T. Shimada. Maintainence architecture and its LSI implementation of a dataflow computer with a... Hiraki , and K. Nishida. An architecture of a data flow machine and its evaluation. In Proceedings of CompCon 84, pages 486-490. IEEE, 1984. [84] N
A Reality Rub Crisis Intervention: "I Wish There Was a Law against Belts."
ERIC Educational Resources Information Center
Long, Nicholas J.; Techet, Bonnie
1994-01-01
Presents Life Space Interview (LSI) or Life Space Crisis Intervention (LSCI) with second-grade student from threatening home environment. Uses Reality Rub Intervention Interview, focusing on five variations: distorted perceptions, tunnel vision, faulty thinking, avoidance, and alibi. Describes incident that led to intervention, interview itself,…
Photometric Characteristics of Sprites and Elves Derived from JEM-GLIMS Nadir Observations (Invited)
NASA Astrophysics Data System (ADS)
Sato, M.; Takahashi, Y.; Adachi, T.; Kobayashi, N.; Mihara, M.; Ushio, T.; Morimoto, T.; Suzuki, M.; Yamazaki, A.; Inan, U.; Linscott, I.
2013-12-01
The main goal of the JEM-GLIMS mission is to identify the horizontal structures of Transient Luminous Events (TLEs) and spatiotemporal relationship between TLEs and their parent lightning discharges based on the nadir observations from the International Space Station (ISS). For this purpose JEM-GLIMS equips two sets of optical instruments (LSI: CMOS camera, and PH: spectrophotometers) and two sets of radio wave receivers (VLFR: VLF receiver, and VITF: VHF interferometer). As all these instruments are installed at the bottom plane of the bus module facing to the Earth, JEM-GLIMS can carry out the nadir observations continuously. JEM-GLIMS was launched by HTV3 and was successfully installed at the exposed facility of the Japanese Experiment Module (JEM) on August 9, 2012. After the initial checkout operations, JEM-GLIMS finally started continuous observations on November 20, 2012. In the period from November 20, 2012 to June 30, 2013, totally 1597 transient optical events related to lightning flashes and/or TLE emissions were detected by the optical instruments. In 578 of these events, both LSI and PH detected clear transient optical signals well above the noise level. In order to derive sprite events from the detected transient optical events, we analyzed PH light-curve data first and estimated the peak irradiance related to the transient optical flashes. Then, we compared these intensities with the atmospheric transmittance. Finally, LSI image data are examined to clarify the morphological properties of the optical emission. We analyzed a transient optical event detected at 00:56:29.198 UT on December 15, 2012. The peak intensities of PH channels are estimated to be 1.4E-2 W/m2 (150-280 nm), 2.3E-4 W/m2 (316 nm), 5.9E-4 W/m2 (337 nm), 4.0E-4 W/m2 (392 nm), 4.2E-4 W/m2 (762 nm), and 6.3E-2 W/m2 (600-900 nm), respectively. It is found that all these intensities are significantly stronger than the lightning emission affected by the atmospheric transmittance. This fact implies that the light sources exist not only in the troposphere but also in the mesosphere. At the image data obtained by the narrow-band filter camera (LSI-2), a pancake structure with bright spots was confirmed. Thus, we attributed the pancake structure and bright spots to a sprite halo and sprite streamers, respectively. We further analyzed a transient optical event obtained at 01:41:00.466 UT on March 30, 2013. In this event very strong pulse signals are detected only by PH1 (150-280 nm) and PH4 (600-900 nm). Since the field-of-view (FOV) of PH4 is 86.8 deg., which is larger than that of other PH channels (FOV=42.7 deg.), a lightning discharge seems to be occurred within PH4 FOV but without FOV of the other PH channels. Nevertheless, the existence of the strong FUV emission detected by PH1 means the occurrence of elves. At the presentation, we will show the results derived from LSI and PH data analysis and will discuss the photometric characteristics more in detail.
The role of savannas in the terrestrial Si cycle: A case-study from Lamto, Ivory Coast
NASA Astrophysics Data System (ADS)
Alexandre, Anne; Bouvet, Mickael; Abbadie, Luc
2011-08-01
Savannas currently occupy a fifth of the earth's land surface and are predicted to expand in the next few centuries at the expense of tropical forests, mainly as a result of deforestation and human fires. Can such a vegetation trend impact, through changes in plant Si cycling, the lithogenic silicon (LSi) release into soils (through chemical weathering) and the net dissolved Si (DSi) outputs from soils to stream water (through chemical denudation)? The first step of an investigation requires quantifying the net Si fluxes involved in the plant/soil system. Here, a schematic steady-state Si cycle, established for a tropical humid savanna (Lamto, Ivory Coast) that developed on a ferruginous soil and is subjected to annual fires, is presented. Erosion was assumed to be insignificant. LSi and biogenic Si (BSi under the form of phytoliths) pools were measured, and Si fluxes were estimated from Si concentrations and mass balance calculation. Identification of plant and soil phytoliths indicated that the soil BSi pool is in equilibrium with the current BSi input by the savanna. In the soil column, mixing between a young rapidly recycled BSi pool and an old stable BSi pool is attested by a mixing line equation. Storage of the old BSi pool is assimilated as a BSi output from the plant/soil system. A BSi output additionally occurs after annual fires, when ashes are exported. Both BSi outputs decrease as much the BSi dissolution. In order to uptake constant DSi flux, the savanna increases by three to eight times the net LSi release, depending upon the post-fire ash exportation scenario. A comparison between savanna and rainforest Si cycles that maximizes the differences in plant/soil systems and minimizes differences in climate is presented. The comparison revealed that BSi storage is higher in the savanna soil than in the rainforest soil, mainly due to BSi production that is twice higher in the savanna (127 vs 67 kg/ha/yr). The resulting LSi release that is enhanced by plant uptake is more than 1.5 higher in the savanna than in the rainforest (from 33 to 85 kg/ha/yr in the savanna vs 21 kg/ha/yr in the rainforest). On the contrary, DSi output from soils to stream water, which is not controlled by plant Si cycling but more likely by the soil hydrological regime (or meteoric weathering), is close to twice as high in the rainforest/ferrallitic soil ecosystem (16 vs 9 kg/ha/yr). This case study suggests that the predicted expansion of savannas at the expense of forests should significantly increase DSi uptake by plants, BSi storage in soils, BSi output with ash exportation, and, hence, LSi release through chemical weathering, without direct impact on DSi outputs from soils to stream water. Tracks for further assessing the role of plant Si cycling on chemical weathering, Si and C cycles were suggested: 1) estimates of BSi fluxes that were wrongly based on the assumption that the amount of DSi leached out from soils is linked to the magnitude of plant Si cycling and/or to BSi concentration in soils should be reappraised and 2) changes in the magnitude of plant Si cycling should be accounted in geochemical carbon cycle models, for one of the plant-induced weathering mechanisms.
The role of savannas in the terrestrial Si cycle: A case-study from Lamto, Ivory Coast
NASA Astrophysics Data System (ADS)
Alexandre, A. E.; Abbadie, L.
2011-12-01
Savannas currently occupy a fifth of the earth's land surface and are predicted to expand in the next few centuries at the expense of tropical forests, mainly as a result of deforestation and human fires. Can such a vegetation trend impact, through changes in plant Si cycling, the lithogenic silicon (LSi) release into soils (through chemical weathering) and the net dissolved Si (DSi) outputs from soils to stream water (through chemical denudation)? The first step of an investigation requires quantifying the net Si fluxes involved in the plant/soil system. Here, a schematic steady-state Si cycle, established for a tropical humid savanna (Lamto, Ivory Coast) that developed on a ferruginous soil and is subjected to annual fires, is presented. Erosion was assumed to be insignificant. LSi and biogenic Si (BSi under the form of phytoliths) pools were measured, and Si fluxes were estimated from Si concentrations and mass balance calculation. Identification of plant and soil phytoliths indicated that the soil BSi pool is in equilibrium with the current BSi input by the savanna. In the soil column, mixing between a young rapidly recycled BSi pool and an old stable BSi pool is attested by a mixing line equation. Storage of the old BSi pool is assimilated as a BSi output from the plant/soil system. A BSi output additionally occurs after annual fires, when ashes are exported. Both BSi outputs decrease as much the BSi dissolution. In order to uptake constant DSi flux, the savanna increases by three to eight times the net LSi release, depending upon the post-fire ash exportation scenario. A comparison between savanna and rainforest Si cycles that maximizes the differences in plant/soil systems and minimizes differences in climate is presented. The comparison revealed that BSi storage is higher in the savanna soil than in the rainforest soil, mainly due to BSi production that is twice higher in the savanna (127 vs 67 kg/ha/yr). The resulting LSi release that is enhanced by plant uptake is more than 1.5 higher in the savanna than in the rainforest (from 33 to 85 kg/ha/yr in the savanna vs 21 kg/ha/yr in the rainforest). On the contrary, DSi output from soils to stream water, which is not controlled by plant Si cycling but more likely by the soil hydrological regime (or meteoric weathering), is close to twice as high in the rainforest/ferrallitic soil ecosystem (16 vs 9 kg/ha/yr). This case study suggests that the predicted expansion of savannas at the expense of forests should significantly increase DSi uptake by plants, BSi storage in soils, BSi output with ash exportation, and, hence, LSi release through chemical weathering, without direct impact on DSi outputs from soils to stream water. Tracks for further assessing the role of plant Si cycling on chemical weathering, Si and C cycles were suggested: 1) estimates of BSi fluxes that were wrongly based on the assumption that the amount of DSi leached out from soils is linked to the magnitude of plant Si cycling and/or to BSi concentration in soils should be reappraised and 2) changes in the magnitude of plant Si cycling should be accounted in geochemical carbon cycle models, for one of the plant-induced weathering mechanisms.
Evolving Kolb: Experiential Education in the Age of Neuroscience
ERIC Educational Resources Information Center
Schenck, Jeb; Cruickshank, Jessie
2015-01-01
In pursuing a refined Learning Styles Inventory (LSI), Kolb has moved away from the original cyclical nature of his model of experiential learning. Kolb's model has not adapted to current research and has failed to increase understanding of learning. A critical examination of Kolb's experiential learning theory in terms of epistemology,…
Formal Operations and Learning Style Predict Success in Statistics and Computer Science Courses.
ERIC Educational Resources Information Center
Hudak, Mary A.; Anderson, David E.
1990-01-01
Studies 94 undergraduate students in introductory statistics and computer science courses. Applies Formal Operations Reasoning Test (FORT) and Kolb's Learning Style Inventory (LSI). Finds that substantial numbers of students have not achieved the formal operation level of cognitive maturity. Emphasizes need to examine students learning style and…
NASA Technical Reports Server (NTRS)
1980-01-01
Detailed software and hardware documentation for the Cardiopulmonary Data Acquisition System is presented. General wiring and timing diagrams are given including those for the LSI-11 computer control panel and interface cables. Flowcharts and complete listings of system programs are provided along with the format of the floppy disk file.
Federal Register 2010, 2011, 2012, 2013, 2014
2012-01-11
... we include in concession contracts a franchise fee payable to the Government that is based upon... establish the required minimum franchise fee for the new contract, that fee will reflect speculative... concessioner offers to meet or exceed the minimum franchise fee that we would establish under the standard LSI...
Induction of Fish Biomarkers by Synthetic-Based Drilling Muds
Gagnon, Marthe Monique; Bakhtyar, Sajida
2013-01-01
The study investigated the effects of chronic exposure of pink snapper (Pagrus auratus Forster), to synthetic based drilling muds (SBMs). Fish were exposed to three mud systems comprised of three different types of synthetic based fluids (SBFs): an ester (E), an isomerized olefin (IO) and linear alpha olefin (LAO). Condition factor (CF), liver somatic index (LSI), hepatic detoxification (EROD activity), biliary metabolites, DNA damage and stress proteins (HSP-70) were determined. Exposure to E caused biologically significant effects by increasing CF and LSI, and triggered biliary metabolite accumulation. While ester-based SBFs have a rapid biodegradation rate in the environment, they caused the most pronounced effects on fish health. IO induced EROD activity and biliary metabolites and LAO induced EROD activity and stress protein levels. The results demonstrate that while acute toxicity of SBMs is generally low, chronic exposure to weathering cutting piles has the potential to affect fish health. The study illustrates the advantages of the Western Australian government case-by-case approach to drilling fluid management, and highlights the importance of considering the receiving environment in the selection of SBMs. PMID:23894492
Laser Speckle Imaging to Monitor Microvascular Blood Flow: A Review.
Vaz, Pedro G; Humeau-Heurtier, Anne; Figueiras, Edite; Correia, Carlos; Cardoso, Joao
2016-01-01
Laser speckle is a complex interference phenomenon that can easily be understood, in concept, but is difficult to predict mathematically, because it is a stochastic process. The use of laser speckle to produce images, which can carry many types of information, is called laser speckle imaging (LSI). The biomedical applications of LSI started in 1981 and, since then, many scientists have improved the laser speckle theory and developed different imaging techniques. During this process, some inconsistencies have been propagated up to now. These inconsistencies should be clarified in order to avoid errors in future works. This review presents a review of the laser speckle theory used in biomedical applications. Moreover, we also make a review of the practical concepts that are useful in the construction of laser speckle imagers. This study is not only an exposition of the concepts that can be found in the literature but also a critical analysis of the investigations presented so far. Concepts like scatterers velocity distribution, effect of static scatterers, optimal speckle size, light penetration angle, and contrast computation algorithms are discussed in detail.
Quantifying Libya-4 Surface Reflectance Heterogeneity With WorldView-1, 2 and EO-1 Hyperion
NASA Technical Reports Server (NTRS)
Neigh, Christopher S. R.; McCorkel, Joel; Middleton, Elizabeth M.
2015-01-01
The land surface imaging (LSI) virtual constellation approach promotes the concept of increasing Earth observations from multiple but disparate satellites. We evaluated this through spectral and spatial domains, by comparing surface reflectance from 30-m Hyperion and 2-m resolution WorldView-2 (WV-2) data in the Libya-4 pseudoinvariant calibration site. We convolved and resampled Hyperion to WV-2 bands using both cubic convolution and nearest neighbor (NN) interpolation. Additionally, WV-2 and WV-1 same-date imagery were processed as a cross-track stereo pair to generate a digital terrain model to evaluate the effects from large (>70 m) linear dunes. Agreement was moderate to low on dune peaks between WV-2 and Hyperion (R2 <; 0.4) but higher in areas of lower elevation and slope (R2 > 0.6). Our results provide a satellite sensor intercomparison protocol for an LSI virtual constellation at high spatial resolution, which should start with geolocation of pixels, followed by NN interpolation to avoid tall dunes that enhance surface reflectance differences across this internationally utilized site.
OPC model generation procedure for different reticle vendors
NASA Astrophysics Data System (ADS)
Jost, Andrew M.; Belova, Nadya; Callan, Neal P.
2003-12-01
The challenge of delivering acceptable semiconductor products to customers in timely fashion becomes more difficult as design complexity increases. The requirements of current generation designs tax OPC engineers greater than ever before since the readiness of high-quality OPC models can delay new process qualifications or lead to respins, which add to the upward-spiraling costs of new reticle sets, extend time-to-market, and disappoint customers. In their efforts to extend the printability of new designs, OPC engineers generally focus on the data-to-wafer path, ignoring data-to-mask effects almost entirely. However, it is unknown whether reticle makers' disparate processes truly yield comparable reticles, even with identical tools. This approach raises the question of whether a single OPC model is applicable to all reticle vendors. LSI Logic has developed a methodology for quantifying vendor-to-vendor reticle manufacturing differences and adapting OPC models for use at several reticle vendors. This approach allows LSI Logic to easily adapt existing OPC models for use with several reticle vendors and obviates the generation of unnecessary models, allowing OPC engineers to focus their efforts on the most critical layers.
NASA Astrophysics Data System (ADS)
Carrassi, A.; Weber, R. J. T.; Guemas, V.; Doblas-Reyes, F. J.; Asif, M.; Volpi, D.
2014-04-01
Initialization techniques for seasonal-to-decadal climate predictions fall into two main categories; namely full-field initialization (FFI) and anomaly initialization (AI). In the FFI case the initial model state is replaced by the best possible available estimate of the real state. By doing so the initial error is efficiently reduced but, due to the unavoidable presence of model deficiencies, once the model is let free to run a prediction, its trajectory drifts away from the observations no matter how small the initial error is. This problem is partly overcome with AI where the aim is to forecast future anomalies by assimilating observed anomalies on an estimate of the model climate. The large variety of experimental setups, models and observational networks adopted worldwide make it difficult to draw firm conclusions on the respective advantages and drawbacks of FFI and AI, or to identify distinctive lines for improvement. The lack of a unified mathematical framework adds an additional difficulty toward the design of adequate initialization strategies that fit the desired forecast horizon, observational network and model at hand. Here we compare FFI and AI using a low-order climate model of nine ordinary differential equations and use the notation and concepts of data assimilation theory to highlight their error scaling properties. This analysis suggests better performances using FFI when a good observational network is available and reveals the direct relation of its skill with the observational accuracy. The skill of AI appears, however, mostly related to the model quality and clear increases of skill can only be expected in coincidence with model upgrades. We have compared FFI and AI in experiments in which either the full system or the atmosphere and ocean were independently initialized. In the former case FFI shows better and longer-lasting improvements, with skillful predictions until month 30. In the initialization of single compartments, the best performance is obtained when the stabler component of the model (the ocean) is initialized, but with FFI it is possible to have some predictive skill even when the most unstable compartment (the extratropical atmosphere) is observed. Two advanced formulations, least-square initialization (LSI) and exploring parameter uncertainty (EPU), are introduced. Using LSI the initialization makes use of model statistics to propagate information from observation locations to the entire model domain. Numerical results show that LSI improves the performance of FFI in all the situations when only a portion of the system's state is observed. EPU is an online drift correction method in which the drift caused by the parametric error is estimated using a short-time evolution law and is then removed during the forecast run. Its implementation in conjunction with FFI allows us to improve the prediction skill within the first forecast year. Finally, the application of these results in the context of realistic climate models is discussed.
DiFabio, Melissa; Slater, Lindsay V; Norte, Grant; Goetschius, John; Hart, Joseph M; Hertel, Jay
2018-03-01
After ACL reconstruction (ACLR), deficits are often assessed using a variety of functional tests, which can be time consuming. It is unknown whether these tests provide redundant or unique information. To explore relationships between components of a battery of functional tests, the Lower Extremity Assessment Protocol (LEAP) was created to aid in developing the most informative, concise battery of tests for evaluating ACLR patients. Descriptive, cross-sectional. Laboratory. 76 ACLR patients (6.86±3.07 months postoperative) and 54 healthy participants. Isokinetic knee flexion and extension at 90 and 180 degrees/second, maximal voluntary isometric contraction for knee extension and flexion, single leg balance, 4 hopping tasks (single, triple, crossover, and 6-meter timed hop), and a bilateral drop vertical jump that was scored with the Landing Error Scoring System (LESS). Peak torque, average torque, average power, total work, fatigue indices, center of pressure area and velocity, hop distance and time, and LESS score. A series of factor analyses were conducted to assess grouping of functional tests on the LEAP for each limb in the ACLR and healthy groups and limb symmetry indices (LSI) for both groups. Correlations were run between measures that loaded on retained factors. Isokinetic and isometric strength tests for knee flexion and extension, hopping, balance, and fatigue index were identified as unique factors for all limbs. The LESS score loaded with various factors across the different limbs. The healthy group LSI analysis produced more factors than the ACLR LSI analysis. Individual measures within each factor had moderate to strong correlations. Isokinetic and isometric strength, hopping, balance, and fatigue index provided unique information. Within each category of measures, not all tests may need to be included for a comprehensive functional assessment of ACLR patients due to the high amount of shared variance between them.
The learning styles of orthopedic residents, faculty, and applicants at an academic program.
Richard, Raveesh Daniel; Deegan, Brian Francis; Klena, Joel Christian
2014-01-01
To train surgeons effectively, it is important to understand how they are learning. The Kolb Learning Style Inventory (LSI) is based on the theory of experiential learning, which divides the learning cycle into 4 stages: active experimentation (AE), abstract conceptualization (AC), concrete experience, and reflective observation. The purpose of this investigation was to assess the learning styles of orthopedic residents, faculty, and applicants at an east-coast residency program. A total of 90 Kolb LSI, Version 3.1 surveys, and demographic questionnaires were distributed to all residency applicants, residents, and faculty at an academic program. Data collected included age, sex, type of medical school (MD or DO), foreign medical graduate status, and either year since college graduation, postgraduate year level (residents only), or years since completion of residency (faculty only). Seventy-one completed Kolb LSI surveys (14 residents, 14 faculty members, and 43 applicants) were recorded and analyzed for statistical significance. The most prevalent learning style among all participants was converging (53.5%), followed by accommodating (18.3%), diverging (18.3%), and assimilating (9.9%) (p = 0.13). The applicant and resident groups demonstrated a high tendency toward AE followed by AC. The faculty group demonstrated a high tendency toward AC followed by AE. None of the 24 subjects who were 26 years or under had assimilating learning styles, in significant contrast to the 12% of 27- to 30-year-olds and 18% of 31 and older group (p < 0.01). The majority of applicants, residents, and faculty in the orthopedic residency program were "convergers." The converging learning style involves problem solving and decision making, with the practical application of ideas and the use of hypothetical-deductive reasoning. Learning through AE decreased with age, whereas learning through AC increased. Copyright © 2014 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.
Initial Results Derived from JEM-GLIMS Observations
NASA Astrophysics Data System (ADS)
Sato, M.; Ushio, T.; Morimoto, T.; Kobayashi, N.; Takahashi, Y.; Suzuki, M.; Yamazaki, A.; Inan, U.; Linscott, I.; Hobara, Y.
2012-12-01
In order to identify the spatial distributions and occurrence conditions of TLEs, JEM-GLIMS (Global Lightning and sprIte MeasurementS on JEM-EF) observations from Japanese Experiment Module - Exposed Facility (JEM-EF) at International Space Station (ISS) will start this year. Science instruments of JEM-GLIMS consist of two kinds of optical detectors and two kinds of radio receivers. The optical instruments are two wide FOV CMOS cameras (LSI) and six-channel spectrophotometers (PH). LSI uses a CMOS device with 512x512 pixels as an imaging sensor and uses a CCTV lens with =25 mm/F=1.4 which becomes 28.3x28.3 deg. FOV. LSI-1 equips a wide band optical filter (766-832 nm) and mainly measures lightning emission, while LSI-2 equips a narrowband optical filter (762+/-7 nm) and mainly measures TLE emission. Five of six PH channels employ the optics with 42.7 deg. conical FOV and use photomultiplier tubes (PMTs) as photon detectors. Each channel of these photometers equips an optical band-pass filter to measure N2 1P, 2P, and LBH emissions. One of six photometers employs a wide-FOV optics (86.8 deg.) and wide-band filter to measure N2 1P lightning emission. All these optical instruments are pointed to the nadir direction. In order to detect whistler wave excited by lightning discharges, one VLF receiver (VLFR) is installed. VLFR consists of a 15 cm nadir-directing monopole antenna and an electronics unit recording waveform data with a sampling frequency of 100 kHz with 14-bit resolution. In addition to this, two sets of VHF receivers (VITF) are also installed to measure VHF pulses emitted by lightning discharges. VITF consists of two patch-type antennas separated by 1.5 m and an electronics unit which records pulse data with a sampling frequency of 200 MHz with 8-bit resolution. Thus, the spatial and temporal evolution of lightning and TLEs can be measured by the two optical instruments, while the electrical characteristics of sprite-inducing lightning discharges can be measured by two radio receivers. JEM-GIMS was successfully launched by H-IIB rocket at 02:06:18 UT on July 21, 2012 and transported to ISS by the HTV-3 cargo transfer spaceship. HTV-3 successfully arrived at ISS on July 27 and our JEM-GLIMS instruments will be installed at JEM-EF on August 9. For the period from September 15 to 21 we will carry out the initial checkout operation, and finally we will start continuous TLE observations from the middle of October. At the presentation we will show the test results obtained during the checkout operations and will present the initial results derived from JEM-GLIMS lightning/TLE observations.
Matthaios, Vasileios N; Triantafyllou, Athanasios G; Koutrakis, Petros
2017-01-01
Periods of abnormally high concentrations of atmospheric pollutants, defined as air pollution episodes, can cause adverse health effects. Southern European countries experience high particulate matter (PM) levels originating from local and distant sources. In this study, we investigated the occurrence and nature of extreme PM 10 (PM with an aerodynamic diameter ≤10 μm) pollution episodes in Greece. We examined PM 10 concentration data from 18 monitoring stations located at five sites across the country: (1) an industrial area in northwestern Greece (Western Macedonia Lignite Area, WMLA), which includes sources such as lignite mining operations and lignite power plants that generate a high percentage of the energy in Greece; (2) the greater Athens area, the most populated area of the country; and (3) Thessaloniki, (4) Patra, and (5) Volos, three large cities in Greece. We defined extreme PM 10 pollution episodes (EEs) as days during which PM 10 concentrations at all five sites exceeded the European Union (EU) 24-hr PM 10 standards. For each EE, we identified the corresponding prevailing synoptic and local meteorological conditions, including wind surface data, for the period from January 2009 through December 2011. We also analyzed data from remote sensing and model simulations. We recorded 14 EEs that occurred over 49 days and could be grouped into two categories: (1) Local Source Impact (LSI; 26 days, 53%) and (2) African Dust Impact (ADI; 23 days, 47%). Our analysis suggested that the contribution of local sources to ADI EEs was relatively small. LSI EEs were observed only in the cold season, whereas ADI EEs occurred throughout the year, with a higher frequency during the cold season. The EEs with the highest intensity were recorded during African dust intrusions. ADI episodes were found to contribute more than local sources in Greece, with ADI and LSI fraction contribution ranging from 1.1 to 3.10. The EE contribution during ADI fluctuated from 41 to 83 μg/m 3 , whereas during LSI it varied from 14 to 67 μg/m 3 . This paper examines the occurrence and nature of extreme PM 10 pollution episodes (EEs) in Greece during a 3-yr period (2009-2011). Fourteen EEs were found of 49 days total duration, classified into two main categories: Local Source Impact (53%) and African Dust Impact (47%). All the above extreme PM 10 air pollution episodes were the result of specific synoptic prevailing conditions. Specific information on the linkages between the synoptic weather patterns and PM 10 concentrations could be used in the development of weather/health-warning system to alert the public that a synoptic episode is imminent.
Detection Method of Lightning and TLEs by JEM-GLIMS Nadir Observation
NASA Astrophysics Data System (ADS)
Adachi, T.; Sato, M.; Ushio, T.; Yamazaki, A.; Suzuki, M.; Masayuki, K.; Takahashi, Y.; Inan, U.; Linscott, I.; Hobara, Y.
2013-12-01
A scientific payload named JEM-GLIMS aboard the International Space Station (ISS) is aimed at observing lightning and Transient Luminous Events (TLEs) globally. Keeping its field-of-view toward the nadir direction, GLIMS clarifies the horizontal structures of lightning and TLEs, which is a crucial issue to understand the electrodynamic coupling between the troposphere and ionosphere. A difficult point, however, is that careful analyses are necessary to separate the emissions of lightning and TLEs which spatially overlap along the line-of-sights in the case of nadir observation. In this study, we analyze the multi-wavelength optical data obtained by GLIMS to identify lightning and TLEs. The main data analyzed are those of imager (LSI) and spectrophotometer (PH). LSI consists of two cameras equipped with a broadband red filter and a narrowband 762-nm filter, respectively, and obtains imagery at a spatial resolution of 400 m/pixel on the ground surface. PH detects time-resolved emission intensity at a sampling rate of 20 kHz by six photometer channels measuring at 150-280, 337, 762, 600-900, 316 and 392 nm, respectively. During a period between November 2012 and June 2013, GLIMS observed 815 lightning and/or TLE events, and in 494 of them, both LSI and PH data showed clear signals above the noise level. As the first step, we carried out case study using an event observed at 09:50:47UT on Jan 29 2013 which did not cause strong saturation on the LSI and PH data. The estimated peak irradiance was 1.38x10^(-3) W/m^(2) at 600-900 nm, which is equivalent to the top 10 % bright lightning events observed by FORTE satellite in the past. This finding suggests that GLIMS selectively observes the most optically-powerful events. The peak irradiance was estimated also for the other PH channels. At all visible channels other than a far ultra violet (FUV) channel, the peak irradiance was estimated to be in good agreement with the atmospheric transmittance curve calculated between 10 km and ISS altitude. We therefore primarily attribute the visible emissions of this event to lightning discharge occurring in the troposphere. Interestingly, GLIMS also detected the FUV emission which is significantly stronger than that expected for tropospheric lightning. This finding suggests that TLE also occurred at higher altitudes where the FUV emission is not affected by atmospheric attenuation. As such, it is clear that GLIMS is able to discriminate optical emissions of lightning and TLEs occurring in the nadir direction. In the conference, we will examine the identification technique in details and, by applying it to all the events, will discuss the validity and limitation.
ERIC Educational Resources Information Center
Tully, Derek; Dunn, Rita; Hlawaty, Heide
2006-01-01
This research compared the effects of a Programmed Learning Sequence (PLS) (Dunn & Dunn, 1993) versus Traditional Teaching (TT) on 100 sixth-grade Bermudian students' test scores on a Fractions Unit. Fifty-three males' and forty-seven females' learning styles were identified with the "Learning Style Inventory" (LSI) (Dunn, Dunn,…
ERIC Educational Resources Information Center
Manolis, Chris; Burns, David J.; Assudani, Rashmi; Chinta, Ravi
2013-01-01
To understand experiential learning, many have reiterated the need to be able to identify students' learning styles. Kolb's Learning Style Model is the most widely accepted learning style model and has received a substantial amount of empirical support. Kolb's Learning Style Inventory (LSI), although one of the most widely utilized instruments to…
ERIC Educational Resources Information Center
Nguyen, Dat-Dao; Zhang, Yue
2011-01-01
This study uses the Learning-Style Inventory--LSI (Smith & Kolb, 1985) to explore to what extent student attitudes toward learning process and outcome of online instruction and Distance Learning are affected by their cognitive styles and learning behaviors. It finds that there are not much statistically significant differences in perceptions…
Middle Grade Students of Iris County: A Descriptive Study from Southern Appalachia.
ERIC Educational Resources Information Center
Phelps, Margaret S.; And Others
Sixth, seventh, and eighth grade students (N=301) from a rural county in Tennessee (Iris County is a pseudonym) completed a Rural School Success Inventory (RSSI) and the Learning Styles Inventory (LSI). The study explored differences between low Socioeconomic Status (SES) students and middle/high SES students. The RSSI provided information about…
Online Education of Older Adults and Its Relation to Life Satisfaction
ERIC Educational Resources Information Center
Dorin, Michelle
2007-01-01
The purpose of this research was to study the effect of participation in online education on the life satisfaction of the older adult. Life satisfaction was assessed by scores obtained using questions the from Nuegarten, Havighurst, and Tobin (1961) Life Satisfaction Index-A (LSI-A). Other data was obtained using demographic and procedural…
The Intersection of Imagery Ability, Imagery Use, and Learning Style: An Exploratory Study
ERIC Educational Resources Information Center
Bolles, Gina; Chatfield, Steven J.
2009-01-01
This study explores the intersection of the individual's imagery ability, imagery use in dance training and performance, and learning style. Thirty-four intermediate-level ballet and modern dance students at the University of Oregon completed the Movement Imagery Questionnaire-Revised (MIQ-R) and Kolb's Learning Style Inventory-3 (LSI-3). The four…
NASA Astrophysics Data System (ADS)
Tsai, Cheng-Han; Wu, Xuanye; Kuan, Da-Han; Zimmermann, Stefan; Zengerle, Roland; Koltay, Peter
2018-08-01
In order to culture and analyze individual living cells, microfluidic cultivation and manipulation of cells become an increasingly important topic. Such microfluidic systems allow for exploring the phenotypic differences between thousands of genetically identical cells or pharmacological tests in parallel, which is impossible to achieve by traditional macroscopic cell culture methods. Therefore, plenty of microfluidic systems and devices have been developed for cell biological studies like cell culture, cell sorting, and cell lysis in the past. However, these microfluidic systems are still limited by the external pressure sources which most of the time are large in size and have to be connected by fluidic tubing leading to complex and delicate systems. In order to provide a miniaturized, more robust actuation system a novel, compact and low power consumption digital hydraulic drive (DHD) has been developed that is intended for use in portable and automated microfluidic systems for various applications. The DHD considered in this work consists of a shape memory alloy (SMA) actuator and a pneumatic cylinder. The switching time of the digital modes (pressure ON versus OFF) can be adjusted from 1 s to min. Thus, the DHDs might have many applications for driving microfluidic devices. In this work, different implementations of DHDs are presented and their performance is characterized by experiments. In particular, it will be shown that DHDs can be used for microfluidic large-scale integration (mLSI) valve control (256 valves in parallel) as well as potentially for droplet-based microfluidic systems. As further application example, high-throughput mixing of cell cultures (96 wells in parallel) is demonstrated employing the DHD to drive a so-called ‘functional lid’ (FL), to enable a miniaturized micro bioreactor in a regular 96-well micro well plate.
Age Stereotypes in Middle-Aged through Old-Old Adults
ERIC Educational Resources Information Center
Davis, Neil Carter; Friedrich, Douglas
2010-01-01
The primary goal of the study was to compare adult age groups on aging bias, with measures of knowledge of aging in the physical, psychological, and social domains and life satisfaction. The study sample, consisting of 752 men and women, 40 to 95 years of age, was tested using Neugarten, Havighurst, and Tobin's (1961) Life Satisfaction Index (LSI)…
Scoping Report: AI-Driven Wargame Replicator
2010-12-01
Evans, 2003 Without training involving external input Responsive to verbal instructions Clark & Karmiloff-Smith, 1993 Associative Rule-based Sloman...Applied to Clustering. Online available on January 21, 2010, at http://laboratorios.fi.uba.ar/lsi/rgm/ comunicaciones /c-AGsclustering-ORLANDO96.pdf...systems for associative recall and recognition. Psychological Review, 91:281-294. [214] Polk, T.A. and Newell, A. (1995). Deduction as verbal reasoning
ERIC Educational Resources Information Center
Metallidou, Panayiota; Platsidou, Maria
2008-01-01
This study aimed at investigating: (a) the psychometric properties of Kolb's LSI-1985 in a Greek sample of pre-service and in-service teachers (N=338), (b) group differences in their learning styles and (c) possible relations between the participants' learning styles and their metacognitive knowledge about the frequency of using various…
ERIC Educational Resources Information Center
Çakiroglu, Ünal
2014-01-01
This study examined the relationships among learning styles, study habits, and learning performances in an online programming language course. Sixty-two sophomore students who enrolled in an online introductory programming course participated in the study. Kolb's Learning Style Inventory (LSI) was used to measure the students' learning styles.…
Kosmala, A; Migeon, B; Flammarion, P; Garric, J
1998-09-01
The impact of a wastewater treatment plant (WWTP) effluent was assessed with the fish biomarker ethoxyresorufin-O-deethylase (EROD) using field and on-site laboratory experiments. EROD activity was measured in chub (Leuciscus cephalus) and stone loach (Noemacheilus barbatulus) caught at three sites of the Chalaronne River (southeast France). Liver somatic index (LSI) and organochloride bioaccumulation in muscle were estimated for chub only. In September, EROD activity and LSI of chub increased significantly between the sites above and below the WWTP effluent discharge. EROD induction detected in chub was confirmed by on-site tank experiments. EROD levels were determined in juvenile rainbow trout (Oncorhynchus mykiss) and mirror carp (Cyprinus carpio) exposed to different concentrations of the WWTP effluent and river water for 16 days. After a 4-day exposure, EROD activities of the carp exposed to the effluent increased significantly compared with the control. The response was linked to the effluent concentration and was stable with exposure time. WWTP effluent induced EROD activity, whereas organic and metal analyses, performed on fish muscle and sediment, did not indicate any difference between upstream and downstream of the discharge. Copyright 1998 Academic Press.
Day, David M; Wilson, Holly A; Bodwin, Kelly; Monson, Candice M
2017-10-01
The dynamic nature of risk to re-offend is an important issue in the management of offenders and has stimulated extensive research into dynamic risk factors that can alter an individual's overall risk to re-offend if addressed. However, few studies have examined the relative importance of these dynamic risk factors, complicating the task of developing case management and treatment plans that will effect the most change. Using a large, high-risk sample and multi-wave data of a common risk assessment tool, the Level of Service Inventory-Ontario Revised (LSI-OR), the current study investigated the relationship among criminogenic risk factors and their role in influencing the overall risk score. Results indicated a diverse pattern of effects on the eight subscale scores, specifically suggesting that changes on Procriminal Attitude/Orientation, Criminal History, and Leisure/Recreation subscales resulted in a quicker rate of change to the overall risk score over time. These results suggest that some factors may be driving the change in overall risk and could potentially effect the most change if prioritized for intervention. Practical implications and implications for further research are discussed.
Population status and habitat associations of the King Rail in the midwestern United States
Bolenbaugh, Jason R.; Cooper, Tom; Brady, Ryan S.; Willard, Karen L.; Krementz, David G.
2012-01-01
The migratory population of the King Rail (Rallus elegans) has declined dramatically during the past 50 years, emphasizing the need to document the distribution and status of this species to help guide conservation efforts. In an effort to guide King Rail breeding habitat protection and restoration, a landscape suitability index (LSI) model was developed for the Upper Mississippi River and Great Lakes Region Joint Venture (JV). To validate this model, 264 sites were surveyed across the JV region in 2008 and 2009 using the National Marshbird Monitoring protocol. Two other similarly collected data sets from Wisconsin (250 sites) and Ohio (259 sites) as well as data from the Cornell Laboratory of Ornithology's eBird database were added to our data set. Sampling effort was not uniform across the study area. King Rails were detected at 29 sites with the greatest concentration in southeastern Wisconsin and northeastern Illinois. Too few detections were made to validate the LSI model. King Rail detection sites tended to have microtopographic heterogeneity, more emergent herbaceous wetland vegetation and less woody vegetation. The migrant population of the King Rail is rare and warrants additional conservation efforts to achieve stated conservation population targets.
Calf Muscle Performance Deficits Remain 7 Years After an Achilles Tendon Rupture.
Brorsson, Annelie; Grävare Silbernagel, Karin; Olsson, Nicklas; Nilsson Helander, Katarina
2018-02-01
Optimizing calf muscle performance seems to play an important role in minimizing impairments and symptoms after an Achilles tendon rupture (ATR). The literature lacks long-term follow-up studies after ATR that describe calf muscle performance over time. The primary aim was to evaluate calf muscle performance and patient-reported outcomes at a mean of 7 years after ATR in patients included in a prospective, randomized controlled trial. A secondary aim was to evaluate whether improvement in calf muscle performance continued after the 2-year follow-up. Cohort study; Level of evidence, 2. Sixty-six subjects (13 women, 53 men) with a mean age of 50 years (SD, 8.5 years) were evaluated at a mean of 7 years (SD, 1 year) years after their ATR. Thirty-four subjects had surgical treatment and 32 had nonsurgical treatment. Patient-reported outcomes were evaluated with Achilles tendon Total Rupture Score (ATRS) and Physical Activity Scale (PAS). Calf muscle performance was evaluated with single-leg standing heel-rise test, concentric strength power heel-rise test, and single-legged hop for distance. Limb Symmetry Index (LSI = injured side/healthy side × 100) was calculated for side-to-side differences. Seven years after ATR, the injured side showed decreased values in all calf muscle performance tests ( P < .001-.012). Significant improvement in calf muscle performance did not continue after the 2-year follow-up. Heel-rise height increased significantly ( P = .002) between the 1-year (10.8 cm) and the 7-year (11.5 cm) follow-up assessments. The median ATRS was 96 (of a possible score of 100) and the median PAS was 4 (of a possible score of 6), indicating minor patient-reported symptoms and fairly high physical activity. No significant differences were found in calf muscle performance or patient-reported outcomes between the treatment groups except for the LSI for heel-rise repetitions. Continued deficits in calf muscle endurance and strength remained 7 years after ATR. No continued improvement in calf muscle performance occurred after the 2-year follow-up except for heel-rise height.
Toole, Allison R; Ithurburn, Matthew P; Rauh, Mitchell J; Hewett, Timothy E; Paterno, Mark V; Schmitt, Laura C
2017-11-01
Study Design Prospective cohort study. Background While meeting objective criterion cutoffs is recommended prior to return to sports following anterior cruciate ligament (ACL) reconstruction, the number of young athletes who meet recommended cutoffs and the impact of cutoffs on longitudinal sports participation are unknown. Objectives To test the hypothesis that a higher proportion of young athletes who meet recommended cutoffs will maintain the same level of sports participation over the year following return-to-sport clearance compared to those who do not meet recommended cutoffs. Methods At the time of return-to-sport clearance, the International Knee Documentation Committee Subjective Knee Evaluation Form (IKDC), quadriceps and hamstring strength limb symmetry index (LSI), and single-leg hop test LSI were assessed. Proportions of participants who met individual (IKDC score of 90 or greater; strength and hop test LSIs of 90% or greater) and combined cutoffs were calculated. Proportions of participants who continued at the same level of sports participation over the year following return-to-sport clearance (assessed using the Tegner activity scale) were compared between those who met and did not meet cutoffs. Results Participants included 115 young athletes (88 female). The proportions meeting individual cutoffs ranged from 43.5% to 78.3%. The proportions meeting cutoffs for all hop tests, all strength tests, and all combined measures were 53.0%, 27.8%, and 13.9%, respectively. A higher proportion of participants who met cutoffs for both strength tests maintained the same level of sports participation over the year following return-to-sport clearance than those who did not (81.3% versus 60.2%, P = .02). Conclusion The proportions of young athletes after ACL reconstruction recently cleared for return to sports who met the combined criterion cutoffs were low. Those who met the criterion cutoffs for both strength tests maintained the same level of sports participation at higher proportions than those who did not. Level of Evidence Prognosis, level 2b. J Orthop Sports Phys Ther 2017;47(11):825-833. Epub 7 Oct 2017. doi:10.2519/jospt.2017.7227.
JPRS Report Science & Technology Japan
1989-06-02
Electronics •Superconducting Wiring in LSI •One Wafer Computer •Josephson Devices •SQUID Devices Infrared Sensor Magnetic Sensor •Superconducting...Guinier- de Wolff monochromatic focusing camera (CoK* radiation) and with Philips APD-10 auto-powder diffractometer (CuKÄ radiation). Pure Si was used as...crystallized and smooth surface. The values indicated in Fig. 2 were the thickness monitored by a quartz oscillating sensor located near the
Bioimaging with micro/nanoelectrode systems.
Matsue, Tomokazu
2013-01-01
This article presents an overview of the recent progress made by our group in the development of bioelectrochemical imaging devices and systems with micro/nanoelectrodes. The topics include bioimaging of enzymes and live cells by scanning electrochemical microscopy (SECM), high-resolution bioimaging by SECM equipped with a nanoprobe, comprehensive measurements and bioimaging with local-redox cycling-based electrochemical (LRC-EC) devices, and rapid and sensitive bioimaging with BioLSI.
Geokinetic Environment Investigations.
1981-03-31
geoceivers. Small DC solenoids had to be incorporated on each tiltmeter to overcome the Y tilt component stiction after geosensor azimuth slews... tiltmeter data during the sample period. Devel- opment of a LSI-11 executable multiple regression program was also initiated. Several runs of the ALS units...understanding of tilt and temperature data in- side the STM units, tilt and temperature data were collected at various locations on the tiltmeter and its
The Use of a Context-Based Information Retrieval Technique
2009-07-01
provided in context. Latent Semantic Analysis (LSA) is a statistical technique for inferring contextual and structural information, and previous studies...WAIS). 10 DSTO-TR-2322 1.4.4 Latent Semantic Analysis LSA, which is also known as latent semantic indexing (LSI), uses a statistical and...1.4.6 Language Models In contrast, natural language models apply algorithms that combine statistical information with semantic information. Semantic
1982-10-01
e.g., providing voters in TMR systems and detection-switching requirements in standby-sparing sys- tems. The application of mathematical thoery of...and time redundancy required for error detection and correction, are interrelated. Mathematical modeling, when applied to fault tolerant systems, can...9 1.1 Some Fundamental Principles............................. 11 1.2 Mathematical Theory of
ERIC Educational Resources Information Center
Courtright, Joachim
2017-01-01
INTRODUCTION. The learning style of a student is an important factor in their ability to gain knowledge. This is especially important in challenging curriculums such as the Doctor of Physical Therapy (DPT) program. A common tool to assess one's learning style is The Kolb Learning Styles Inventory (LSI). A common tool used to measure the…
Federal Register 2010, 2011, 2012, 2013, 2014
2012-08-23
..., Inc. (MRI), a noncarrier, has filed a verified notice of exemption under 49 CFR 1150.31 to acquire...). MRI now seeks to reinstitute rail service over Segment 2 as a successor in interest to LSI, an action... recreational trail and is not at issue here.\\1\\ \\1\\ MRI simultaneously filed a petition for partial vacation of...
A lightweight electronically commutated dc motor for electric passenger vehicles
NASA Technical Reports Server (NTRS)
Echolds, E. F.; Walla, P. S.
1982-01-01
A functional model breadboard converter and a rare-earth-cobalt, permanent magnet motor; as well as an engineering model converter and PM motor suitable for vehicle installations were developed and tested. The converter and motor achieved an 88% peak efficiency, a maximum output of 26 kW at 26,000 rpm, and a continuous rating of 15 kW. The system also generated power to the source during braking, with a demonstrated peak power available at the converter terminals of approximately 26 kW at 88% efficiency. Major conclusions include: (1) the SAE J227a(D) driving cycle efficiency for the converter/motor is 86% to 88% when energy available for recovery at the converter terminals is included; (2) the converter initial cost is approximately five times that of the permanent magnet motor, but can be reduced by means of LSI logic and integrated liquid cooled semiconductor packages; and (3) an electronically commutated motor with a liquid cooled converter will operate reliably without service or maintenance for the life of a passenger vehicle.
A lightweight electronically commutated dc motor for electric passenger vehicles
NASA Astrophysics Data System (ADS)
Echolds, E. F.; Walla, P. S.
1982-09-01
A functional model breadboard converter and a rare-earth-cobalt, permanent magnet motor; as well as an engineering model converter and PM motor suitable for vehicle installations were developed and tested. The converter and motor achieved an 88% peak efficiency, a maximum output of 26 kW at 26,000 rpm, and a continuous rating of 15 kW. The system also generated power to the source during braking, with a demonstrated peak power available at the converter terminals of approximately 26 kW at 88% efficiency. Major conclusions include: (1) the SAE J227a(D) driving cycle efficiency for the converter/motor is 86% to 88% when energy available for recovery at the converter terminals is included; (2) the converter initial cost is approximately five times that of the permanent magnet motor, but can be reduced by means of LSI logic and integrated liquid cooled semiconductor packages; and (3) an electronically commutated motor with a liquid cooled converter will operate reliably without service or maintenance for the life of a passenger vehicle.
NASA Technical Reports Server (NTRS)
Lim, R. S.
1974-01-01
The first-in-first-out memory buffer (FIFO), is an elastic digital memory whose main application is in data buffering between devices operating at different rates. Data written into the top is moved autonomously down toward the bottom of the FIFO to the lowest unoccupied location, and data read from the bottom of the FIFO will cause data from the top to move autonomously down toward the bottom. The FIFO is available in MOS LSI asynchronous form with data rate in the 1 MHz region. The FIFO described yields a simple high-speed iterative implementation, either synchronous of asynchronous. Because of this simple iterative structure, the FIFO is expandable in both number of words and bits per word, and it is attractive from the viewpoint of integrated-circuit production. For the synchronous FIFO, a model was built and successfully used in the controller for the UNICON laser memory. For the asynchronous FIFO, a model was built and also successfully used in a high-performance magnetic tape controller.
NASA Astrophysics Data System (ADS)
Kurokawa, Ami; Doshida, Tomoki; Hagihara, Yukito; Suzuki, Hiroshi; Takai, Kenichi
2018-05-01
Though intergranular (IG) and quasi-cleavage (QC) fractures have been widely recognized as typical fracture modes of the hydrogen-induced cracking in high-strength steels, the main factor has been unclarified yet. In the present study, the hydrogen content dependence on the main factor causing hydrogen-induced cracking has been examined through the fracture mode transition from QC to IG at the crack initiation site in the tempered martensitic steels. Two kinds of tempered martensitic steels were prepared to change the cohesive force due to the different precipitation states of Fe3C on the prior γ grain boundaries. A high amount of Si (H-Si) steel has a small amount of Fe3C on the prior austenite grain boundaries. Whereas, a low amount of Si (L-Si) steel has a large amount of Fe3C sheets on the grain boundaries. The fracture modes and initiations were observed using FE-SEM (Field Emission-Scanning Electron Microscope). The crack initiation sites of the H-Si steel were QC fracture at the notch tip under various hydrogen contents. While the crack initiation of the L-Si steel change from QC fracture at the notch tip to QC and IG fractures from approximately 10 µm ahead of the notch tip as increasing in hydrogen content. For L-Si steels, two possibilities are considered that the QC or IG fracture occurred firstly, or the QC and IG fractures occurred simultaneously. Furthermore, the principal stress and equivalent plastic strain distributions near the notch tip were calculated with FEM (Finite Element Method) analysis. The plastic strain was the maximum at the notch tip and the principle stress was the maximum at approximately 10 µm from the notch tip. The position of the initiation of QC and IG fracture observed using FE-SEM corresponds to the position of maximum strain and stress obtained with FEM, respectively. These findings indicate that the main factors causing hydrogen-induced cracking are different between QC and IG fractures.
NASA Astrophysics Data System (ADS)
Adams, Kenneth Mark
The purpose of this research was to investigate the relationship between the learning style perceptual preferences of fourth grade urban students and the attainment of selected physical science concepts for three simple machines as taught using learning cycle methodology. The sample included all fourth grade children from one urban elementary school (N = 91). The research design followed a quasi-experimental format with a single group, equivalent teacher demonstration and student investigation materials, and identical learning cycle instructional treatment. All subjects completed the Understanding Simple Machines Test (USMT) prior to instructional treatment, and at the conclusion of treatment to measure student concept attainment related to the pendulum, the lever and fulcrum, and the inclined plane. USMT pre and post-test scores, California Achievement Test (CAT-5) percentile scores, and Learning Style Inventory (LSI) standard scores for four perceptual elements for each subject were held in a double blind until completion of the USMT post-test. The hypothesis tested in this study was: Learning style perceptual preferences of fourth grade students as measured by the Dunn, Dunn, and Price Learning Style Inventory (LSI) are significant predictors of success in the acquisition of physical science concepts taught through use of the learning cycle. Analysis of pre and post USMT scores, 18.18 and 30.20 respectively, yielded a significant mean gain of +12.02. A controlled stepwise regression was employed to identify significant predictors of success on the USMT post-test from among USMT pre-test, four CAT-5 percentile scores, and four LSI perceptual standard scores. The CAT -5 Total Math and Total Reading accounted for 64.06% of the variance in the USMT post-test score. The only perceptual element to act as a significant predictor was the Kinesthetic standard score, accounting for 1.72% of the variance. The study revealed that learning cycle instruction does not appear to be sensitive to different perceptual preferences. Students with different preferences for auditory, visual, and tactile modalities, when learning, seem to benefit equally from learning cycle exposure. Increased use of a double blind for future learning styles research was recommended.
Abourezk, Matthew N; Ithurburn, Matthew P; McNally, Michael P; Thoma, Louise M; Briggs, Matthew S; Hewett, Timothy E; Spindler, Kurt P; Kaeding, Christopher C; Schmitt, Laura C
2017-01-01
Anterior cruciate ligament reconstruction (ACLR) using a hamstring tendon autograft often results in hamstring muscle strength asymmetry. However, the effect of hamstring muscle strength asymmetry on knee mechanics has not been reported. Participants with hamstring strength asymmetry would demonstrate altered involved limb knee mechanics during walking and jogging compared with those with more symmetric hamstring strength at least 2 years after ACLR with a hamstring tendon autograft. Controlled laboratory study. There were a total of 45 participants at least 2 years after ACLR (22 male, 23 female; mean time after ACLR, 34.6 months). A limb symmetry index (LSI) was calculated for isometric hamstring strength to subdivide the sample into symmetric hamstring (SH) (LSI ≥90%; n = 18) and asymmetric hamstring (AH) (LSI <85%; n = 18) groups. Involved knee kinematic and kinetic data were collected using 3-dimensional motion analysis during gait and jogging. Peak sagittal-, frontal-, and transverse-plane knee angles and sagittal-plane knee moments and knee powers were calculated. Independent-samples t tests and analyses of covariance were used to compare involved knee kinematic and kinetic variables between the groups. There were no differences in sagittal- and frontal-plane knee angles between the groups ( P > .05 for all). The AH group demonstrated decreased tibial internal rotation during weight acceptance during gait ( P = .01) and increased tibial external rotation during jogging at initial contact ( P = .03) and during weight acceptance ( P = .02) compared with the SH group. In addition, the AH group demonstrated decreased peak negative knee power during midstance ( P = .01) during gait compared with the SH group, after controlling for gait speed, which differed between groups. Participants with hamstring strength asymmetry showed altered involved knee mechanics in the sagittal plane during gait and in the transverse plane during gait and jogging compared with those with more symmetric hamstring strength. Hamstring strength asymmetry is common at 3 years after ACLR with a hamstring tendon autograft and affects involved knee mechanics during gait and jogging. Additional research is warranted to further investigate the longitudinal effect of these alterations on knee function and joint health after ACLR.
Preece, Ryan A; Cope, Alexandra C
2016-01-01
Medical students and surgical trainees differ considerably in both their preferential learning styles and personality traits. This study compares the personality profiles and learning styles of surgical trainees with a cohort of medical students specifically intent on pursuing a surgical career. A cross-sectional study was conducted contrasting surgical trainees with medical students specifying surgical career intent. The 50-item International Personality Item Pool Big-Five Factor Marker (FFM) questionnaire was used to score 5 personality domains (extraversion, conscientiousness, agreeableness, openness to experience, and neuroticism). The 24-item Learning Style Inventory (LSI) Questionnaire was used to determine the preferential learning styles (visual, auditory, or tactile). χ(2) Analysis and independent samples t-test were used to compare LSI and FFM scores, respectively. Surgical trainees from several UK surgical centers were contrasted to undergraduate medical students. A total of 53 medical students who had specifically declared desire to pursue a surgical career and were currently undertaking an undergraduate intercalated degree in surgical sciences were included and contrasted to 37 UK core surgical trainees (postgraduate years 3-4). The LSI questionnaire was completed by 53 students and 37 trainees. FFM questionnaire was completed by 29 medical students and 34 trainees. No significant difference for learning styles preference was detected between the 2 groups (p = 0.139), with the visual modality being the preferred learning style for both students and trainees (69.8% and 54.1%, respectively). Neuroticism was the only personality trait to differ significantly between the 2 groups, with medical students scoring significantly higher than trainees (2.9 vs. 2.6, p = 0.03). Medical students intent on pursuing a surgical career exhibit similar personality traits and learning styles to surgical trainees, with both groups preferring the visual learning modality. These findings facilitate future research into potential ways of improving both the training and selection of students and junior trainees onto residency programs. Copyright © 2016 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.
2015-03-01
min of pulse oximeter photopletysmograph waveforms and extracted features to predict LSIs. We compared this with clinical judgment of LSIs by...Curve (AUROC). We obtained clinical judgment of need for LSI from 405 expert clinicians in135 trauma patients. The pulse oximeter algorithm...15 min of pulse oximeter waveforms predicts the need for LSIs during initial trauma resuscitation as accurately as judgment of expert trauma
2008-07-30
NASA Ames Robotics Academy Interns at the Lunar Science Institute (LSI) building 17 Interns: David Black, Michael Zwach, Guy Chriqui, Mark Mordarski Jr., Katy Levinson, Daniela Buchman, Scott Strutner, Patrick Crownover, Neil Bhateja, Michael Buchman, John Mueller, Michelle Grau, Ben Silver, Jacques Dolan, Alex Golec Windell Jones, Colin Wilson, Joe DeBlasio, Nick Hayes, Jordan Olive, William Shaw, Ames Education Dept., Mark Leon, Ames Robotics, Josh Weiner, jack Biesiadecki, Andrew Pilloud
Development of a Communications Front End Processor (FEP) for the VAX-11/780 Using an LSI-11/23.
1983-12-01
9 Approach . . . . . . . . . . . . . . . . . . 11 Software Development Life Cycle . . . . . . . 11 Requirements Analysis...proven to be useful (25] during the Software Development Life Cycle of a project. Development tools and documentation aids used throughout this effort...include "Structure Charts" ( ref Appendix B ), a "Data Dictionary" ( ref Appendix C ),and Program Design Language CPDL). 1.5.1 Software Development- Life
1982-07-01
of emula- tion in more detail. System components such as memories and I/O interfaces are also represen- ted in the emulation so that the complete...engineeAing Aupp4t wUn a..u oi teeicA. Cmpete ia lp’ovUed to ESP Pu a f 1c ( POe1 mid otbtA ESP eteMeftb. The Pt.Lnept tesf&A Uif dn 0 M e 4c.Ou~w~C. 04
2008-09-30
grass, Thalassia testudinum) and in Monterey Bay (eel grass, Zostera marina). Assess how the microbial community affects the flux of photons to and...optical properties and photosynthetic potential of the seagrasses Thalassia testudinum and Zostera marina”. The manuscript will be submitted to the...crystals in Thalassia from LSI. We have pursued this serendipitous discovery, and at the Estuarine Research Federation meeting this fall, we will
High Frequency Analog LSI Development.
1979-11-12
made to incorporate more optimal values through appropriate series or parallel connection of the four capacitors embedded on chip. The use of SPICE-2...collector of Q4 to about 50Q with some inductive reactance at the output. An external capacitor in series with the chip output serves as a DC block...by Under authority of CE Holland, Head CD Pierson, Jr, Head Advanced Applications Electronics Engineering Division and Sciences Department / f
Krishnan, Rahul; Arora, Rajan P; Alexander, Michael; White, Sean M; Lamb, Morgan W; Foster, Clarence E; Choi, Bernard; Lakey, Jonathan R T
2014-01-01
Alginate encapsulation reduces the risk of transplant rejection by evading immune-mediated cell injury and rejection; however, poor vascular perfusion results in graft failure. Since existing imaging models are incapable of quantifying the vascular response to biomaterial implants after transplantation, in this study, we demonstrate the use of in vivo laser speckle imaging (LSI) and wide-field functional imaging (WiFI) to monitor the microvascular environment surrounding biomaterial implants. The vascular response to two islet-containing biomaterial encapsulation devices, alginate microcapsules and a high-guluronate alginate sheet, was studied and compared after implantation into the mouse dorsal window chamber (N = 4 per implant group). Images obtained over a 14-day period using LSI and WiFI were analyzed using algorithms to quantify blood flow, hemoglobin oxygen saturation and vascular density. Using our method, we were able to monitor the changes in the peri-implant microvasculature noninvasively without the use of fluorescent dyes. Significant changes in blood flow, hemoglobin oxygen saturation and vascular density were noted as early as the first week post-transplant. The dorsal window chamber model enables comparison of host responses to transplanted biomaterials. Future experiments will study the effect of changes in alginate composition on the vascular and immune responses. Copyright © 2013 Elsevier Ltd. All rights reserved.
NASA Astrophysics Data System (ADS)
Peuser, Jörn; Belhaj-Saif, Abderraouf; Hamadjida, Adjia; Schmidlin, Eric; Gindrat, Anne-Dominique; Völker, Andreas Charles; Zakharov, Pavel; Hoogewoud, Henri-Marcel; Rouiller, Eric M.; Scheffold, Frank
2011-09-01
The nonhuman primate model is suitable to study mechanisms of functional recovery following lesion of the cerebral cortex (motor cortex), on which therapeutic strategies can be tested. To interpret behavioral data (time course and extent of functional recovery), it is crucial to monitor the properties of the experimental cortical lesion, induced by infusion of the excitotoxin ibotenic acid. In two adult macaque monkeys, ibotenic acid infusions produced a restricted, permanent lesion of the motor cortex. In one monkey, the lesion was monitored over 3.5 weeks, combining laser speckle imaging (LSI) as metabolic readout (cerebral blood flow) and anatomical assessment with magnetic resonance imaging (T2-weighted MRI). The cerebral blood flow, measured online during subsequent injections of the ibotenic acid in the motor cortex, exhibited a dramatic increase, still present after one week, in parallel to a MRI hypersignal. After 3.5 weeks, the cerebral blood flow was strongly reduced (below reference level) and the hypersignal disappeared from the MRI scan, although the lesion was permanent as histologically assessed post-mortem. The MRI data were similar in the second monkey. Our experiments suggest that LSI and MRI, although they reflect different features, vary in parallel during a few weeks following an excitotoxic cortical lesion.
Rice, Tyler B.; Konecky, Soren D.; Owen, Christopher; Choi, Bernard; Tromberg, Bruce J.
2012-01-01
Laser Speckle Imaging (LSI) is fast, noninvasive technique to image particle dynamics in scattering media such as biological tissue. While LSI measurements are independent of the overall intensity of the laser source, we find that spatial variations in the laser source profile can impact measured flow rates. This occurs due to differences in average photon path length across the profile, and is of significant concern because all lasers have some degree of natural Gaussian profile in addition to artifacts potentially caused by projecting optics. Two in vivo measurement are performed to show that flow rates differ based on location with respect to the beam profile. A quantitative analysis is then done through a speckle contrast forward model generated within a coherent Spatial Frequency Domain Imaging (cSFDI) formalism. The model predicts remitted speckle contrast as a function of spatial frequency, optical properties, and scattering dynamics. Comparison with experimental speckle contrast images were done using liquid phantoms with known optical properties for three common beam shapes. cSFDI is found to accurately predict speckle contrast for all beam shapes to within 5% root mean square error. Suggestions for improving beam homogeneity are given, including a widening of the natural beam Gaussian, proper diffusing glass spreading, and flat top shaping using microlens arrays. PMID:22741080
Assessing learning styles of Saudi dental students using Kolb's Learning Style Inventory.
ALQahtani, Dalal A; Al-Gahtani, Sara M
2014-06-01
Experiential learning theory (ELT), a theory developed by David Kolb that considers experience to be very important for learning, classifies learners into four categories: Divergers, Assimilators, Convergers, and Accommodators. Kolb used his Learning Style Inventory (LSI) to validate ELT. Knowing the learning styles of students facilitates their understanding of themselves and thereby increases teaching efficiency. Few studies have been conducted that investigate learning preferences of students in the field of dentistry. This study was designed to distinguish learning styles among Saudi dental students and interns utilizing Kolb's LSI. The survey had a response rate of 62 percent (424 of 685 dental students), but surveys with incomplete answers or errors were excluded, resulting in 291 usable surveys (42 percent of the student population). The independent variables of this study were gender, clinical experience level, academic achievement as measured by grade point average (GPA), and specialty interest. The Diverging learning style was the dominant style among those in the sample. While the students preferred the Assimilating style during their early preclinical years, they preferred the Diverging style during their later clinical years. No associations were found between students' learning style and their gender, GPA, or specialty interest. Further research is needed to support these findings and demonstrate the impact of learning styles on dental students' learning.
Late-acting self-incompatibility--the pariah breeding system in flowering plants.
Gibbs, Peter E
2014-08-01
It is estimated that around half of all species of flowering plants show self-incompatibility (SI). However, the great majority of species alleged to have SI simply comply with 'the inability of a fully fertile hermaphrodite plant to produce zygotes when self-pollinated'--a definition that is neutral as to cause. Surprisingly few species have been investigated experimentally to determine whether their SI has the type of genetic control found in one of the three established mechanisms, that is, homomorphic gametophytic, homomorphic sporophytic or heteromorphic SI. Furthermore, our knowledge of the molecular basis of homomorphic SI derives from a few species in just five families--a small sample that has nevertheless revealed the existence of three different molecular mechanisms. Importantly, a sizeable cohort of species are self-sterile despite the fact that self-pollen tubes reach the ovary and in most cases penetrate ovules, a phenomenon called late-acting self-incompatibility (LSI). This review draws attention to the confusion between species that show 'self-incompatibility' and those that possess one of the 'conventional SI mechanisms' and to argue the case for recognition of LSI as having a widespread occurrence and as a mechanism that inhibits selfing and promotes outbreeding in many plant species. © 2014 The Authors. New Phytologist © 2014 New Phytologist Trust.
Confocal observations of late-acting self-incompatibility in Theobroma cacao L.
Ford, Caroline S; Wilkinson, Mike J
2012-09-01
Cocoa (Theobroma cacao) has an idiosyncratic form of late-acting self-incompatibility that operates through the non-fusion of incompatible gametes. Here, we used high-resolution confocal microscopy to define fine level changes to the embryo sac of the strongly self-incompatible cocoa genotype SCA 24 in the absence of pollination, and following compatible and incompatible pollination. All sperm nuclei had fused with the female nuclei by 48 h following compatible pollinations. However, following incompatible pollinations, we observed divergence in the behaviour of sperm nuclei following release into the embryo sac. Incomplete sperm nucleus migration occurred in approximately half of the embryo sacs, where the sperm nuclei had so far failed to reach the female gamete nuclei. Sperm nuclei reached but did not fuse with the female gamete nuclei in the residual cases. We argue that the cellular mechanisms governing sperm nucleus migration to the egg nucleus and those controlling subsequent nuclear fusion are likely to differ and should be considered independently. Accordingly, we recommend that future efforts to characterise the genetic basis of LSI in cocoa should take care to differentiate between these two events, both of which contribute to failed karyogamy. Implications of these results for continuing efforts to gain better understanding of the genetic control of LSI in cocoa are discussed.
Tanner Stapleton, Lynlee R; Dunkel Schetter, Christine; Dooley, Larissa N; Guardino, Christine M; Huynh, Jan; Paek, Cynthia; Clark-Kauffman, Elizabeth; Schafer, Peter; Woolard, Richard; Lanzi, Robin Gaines
2016-07-01
Chronic stress is implicated in many theories as a contributor to a wide range of physical and mental health problems. The current study describes the development of a chronic stress measure that was based on the UCLA Life Stress Interview (LSI) and adapted in collaboration with community partners for use in a large community health study of low-income, ethnically diverse parents of infants in the USA (Community Child Health Network [CCHN]). We describe the instrument, its purpose and adaptations, implementation, and results of a reliability study in a subsample of the larger study cohort. Interviews with 272 mothers were included in the present study. Chronic stress was assessed using the CCHN LSI, an instrument designed for administration by trained community interviewers to assess four domains of chronic stress, each rated by interviewers. Significant correlations ranging from small to moderate in size between chronic stress scores on this measure, other measures of stress, biomarkers of allostatic load, and mental health provide initial evidence of construct and concurrent validity. Reliability data for interviewer ratings are also provided. This relatively brief interview (15 minutes) is available for use and may be a valuable tool for researchers seeking to measure chronic stress reliably and validly in future studies with time constraints.
Modernization of the NASA IRTF Telescope Control System
NASA Astrophysics Data System (ADS)
Pilger, Eric J.; Harwood, James V.; Onaka, Peter M.
1994-06-01
We describe the ongoing modernization of the NASA IR Telescope Facility Telescope Control System. A major mandate of this project is to keep the telescope available for observations throughout. Therefore, we have developed an incremental plan that will allow us to replace components of the software and hardware without shutting down the system. The current system, running under FORTH on a DEC LSI 11/23 minicomputer interfaced to a Bus and boards developed in house, will be replaced with a combination of a Sun SPARCstation running SunOS, a MicroSPARC based Single Board Computer running LynxOS, and various intelligent VME based peripheral cards. The software is based on a design philosophy originally developed by Pat Wallace for use on the Anglo Australian Telescope. This philosophy has gained wide acceptance, and is currently used in a number of observatories around the world. A key element of this philosophy is the division of the TCS into `Virtual' and `Real' parts. This will allow us to replace the higher level functions of the TCS with software running on the Sun, while still relying on the LSI 11/23 for performance of the lower level functions. Eventual transfer of lower level functions to the MicroSPARC system will then proceed incrementally through use of a Q-Bus to VME-Bus converter.
Hunt-Shanks, Tiffany; Blanchard, Christopher; Reid, Robert D
2009-05-01
Female cardiac patients frequently experience greater anxiety and depression and engage in less exercise when compared with their male counterparts. This study considered whether exercise had similar effects on male and female cardiac patients' autonomic anxiety, negative affect and depression, and whether exercise behavior explained the gender difference in their affective functioning (e.g. autonomic anxiety, negative affect and depression). Eight hundred one participants completed the Hospital and Anxiety Depression Scale (HADS) and the leisure score index (LSI) of the Godin Leisure-Time Exercise Questionnaire at baseline, 6 months, 12 months, and 24 months. Female cardiac patients had greater autonomic anxiety, negative affect and depression and reduced exercise when compared with male cardiac patients at all time points. Although exercise was significantly related to affective outcomes at various time points for both men and women, gender did not moderate any of the exercise/affective relationships, and exercise did not mediate any of the gender/affective relationships. Further research is needed to clarify the complex relationships between gender, exercise, and the affective functioning of cardiac patients.
Leisure activities and attitude of institutionalized elderly people: a basis for nursing practice.
de Castro, Vivian Carla; Carreira, Lígia
2015-01-01
to identify the leisure activities performed in Long-Stay Institutions for the Elderly (LSIEs), registered in the city of Maringá-PR, Brazil, and to analyze the attitude of the elderly people toward leisure promoted by the institutions. this was a descriptive and transversal study with a quantitative approach, carried out with 97 elderly people, through the establishment of the socio-demographic profile and the application of the Leisure Attitude Scale. The data was subjected to descriptive statistical analysis, association tests (chi-square or Fisher's) and Spearman's correlation. males, aged 80 or over, widowed, with one to eight years of study, who had a monthly income were predominant. Age group and income were significantly associated with the performance of leisure activities. The results reflected the positive attitude of the elderly people in relation to leisure activities, except in the behavioral component. the findings of this study indicate the need for further investigation into the difficulties linked to the attitude toward leisure in the behavioral component, considering aspects such as individual concepts of leisure and the health status of the elderly people.
Translocation (10;17)(p15;q21) is a recurrent anomaly in acute myeloblastic leukemia.
Tempescul, Adrian; Guillerm, Gaëlle; Douet-Guilbert, Nathalie; Morel, Frédéric; Le Bris, Marie-Josée; De Braekeleer, Marc
2007-01-01
We report here two cases of patients with acute myeloblastic leukemia, type M1 (FAB classification), associated with a t(10;17)(p15;q21). Fluorescence in situ hybridization with the LSI PML/RARA dual-color probe showed the breakpoint to be distal to the RARA locus. Four other patients with this translocation have been reported, three of them having acute undifferentiated or poorly differentiated leukemia.
GaAs digital dynamic IC's for applications up to 10 GHz
NASA Astrophysics Data System (ADS)
Rocchi, M.; Gabillard, B.
1983-06-01
To evaluate the potentiality of GaAs MESFET's as transmitting gates, dynamic TT-bar flip-flops have been fabricated using a self-aligned planar process. The maximum operating frequency is 10.2 GHz, which is the best speed performance ever reported for a digital circuit. The performance of the transmitting gates within the circuits are discussed in detail. Speed improvement and topological simplification of fully static LSI subsystems are investigated.
Feasibility of a special-purpose computer to solve the Navier-Stokes equations
NASA Technical Reports Server (NTRS)
Gritton, E. C.; King, W. S.; Sutherland, I.; Gaines, R. S.; Gazley, C., Jr.; Grosch, C.; Juncosa, M.; Petersen, H.
1978-01-01
Orders-of-magnitude improvements in computer performance can be realized with a parallel array of thousands of fast microprocessors. In this architecture, wiring congestion is minimized by limiting processor communication to nearest neighbors. When certain standard algorithms are applied to a viscous flow problem and existing LSI technology is used, performance estimates of this conceptual design show a dramatic decrease in computational time when compared to the CDC 7600.
Design, processing, and testing of LSI arrays for space station
NASA Technical Reports Server (NTRS)
Schneider, W. C.
1974-01-01
At wafer probe, units of the TA6567 circuit, a beam leaded COS/MOS/SOS 256-bit RAM, were demonstrated to be functionally perfect. An aluminum gate current-sense version and a silicon-gate voltage-sense version of this memory were developed. Initial base line data for the beam lead SOS process using the TA5388 circuit show the stability of the dc device characteristics through the beam lead processing.
Helicopter In-Flight Monitoring System Second Generation (HIMS II).
1983-08-01
acquisition cycle. B. Computer Chassis CPU (DEC LSI-II/2) -- Executes instructions contained in the memory. 32K memory (DEC MSVII-DD) --Contains program...when the operator executes command #2, 3, or 5 (display data). New cartridges can be inserted as required for truly unlimited, continuous data...is called bootstrapping. The software, which is stored on a tape cartridge, is loaded into memory by execution of a small program stored in read-only
2008-09-16
interests are strategic resource management, strategic control, and corporate financial reporting. Joseph G. San Miguel Professor Graduate School of...Missile Defense PEO – Program Executive Officer PM – Program Manager SAIC – Science Applications International Corporation SAP – Systems Applications...International Corporation (SAIC) team (DoD, 2002). In addition to providing important personnel, the LSI team would provide an important advantage in
Sea-level rise impacts on seawater intrusion in coastal aquifers: Review and integration
NASA Astrophysics Data System (ADS)
Ketabchi, Hamed; Mahmoodzadeh, Davood; Ataie-Ashtiani, Behzad; Simmons, Craig T.
2016-04-01
Sea-level rise (SLR) influences groundwater hydraulics and in particular seawater intrusion (SWI) in many coastal aquifers. The quantification of the combined and relative impacts of influential factors on SWI has not previously been considered in coastal aquifers. In the present study, a systematic review of the available literature on this topic is first provided. Then, the potential remaining challenges are scrutinized. Open questions on the effects of more realistic complexities such as gradual SLR, parameter uncertainties, and the associated influences in decision-making models are issues requiring further investigation. We assess and quantify the seawater toe location under the impacts of SLR in combination with recharge rate variations, land-surface inundation (LSI) due to SLR, aquifer bed slope variation, and changing landward boundary conditions (LWBCs). This is the first study to include all of these factors in a single analysis framework. Both analytical and numerical models are used for these sensitivity assessments. It is demonstrated that (1) LSI caused by SLR has a significant incremental impact on the seawater toe location, especially in the flatter coasts and the flux-controlled (FC) LWBCs, however this impact is less than the reported orders of magnitude differences which were estimated using only analytical solutions; (2) LWBCs significantly influence the SLR impacts under almost all conditions considered in this study; (3) The main controlling factors of seawater toe location are the magnitudes of fresh groundwater discharge to sea and recharge rate. Regional freshwater flux entering from the landward boundary and the groundwater hydraulic gradient are the major contributors of fresh groundwater discharge to sea for both FC and head-controlled (HC) systems, respectively; (4) A larger response of the aquifer and larger seawater toe location changes are demonstrable for a larger ratio of the aquifer thickness to the aquifer length particularly in the HC systems; (5) The lowest sensitivity of seawater toe location is found for the density difference ratio of the seawater and freshwater, and also for the aquifer bed slope; (6) The early-time observations show seawater fingers below the inundated lands due to SLR which are diminished and ultimately extinguished; and (7) A less than 2% reversal effect on the seawater toe location after overshoot mechanism is observed in the transient simulations which suggests that this mechanism is an insignificant and impractical factor compared to other more significant factors.
NASA Astrophysics Data System (ADS)
Hagevik, Rita Anne
This study investigated the effects of using Geographic Information Systems (GIS) to improve middle school students' and their teachers' understanding of environmental content and GIS. Constructivism provided the theoretical framework with Bonnstetter's inquiry evolution and Swartz's problem solving as the conceptual framework for designing these GIS units and interpreting the results. Teachers from nine schools in five counties attended a one-week workshop and follow-up session, where they learned how to teach the online Mapping Our School Site (www.ncsu.edu/scilink/studysite) and CITYgreen GIS inquiry-based problem-solving units. Two years after the workshop, two teachers from the workshop taught the six week Mapping Our School Site (MOSS) unit in the fall and one teacher from a different school taught the MOSS unit in the fall and the CITYgreen GIS unit in the spring. The students in the MOSS experimental group (n = 131) and the CITYgreen GIS comparison group (n = 33) were compared for differences in understanding of environmental content. Other factors were investigated such as students' spatial abilities, experiences, and learning preferences. Teachers and students completed the online Learning Styles Inventory (LSI), Spatial Experience Survey (SES), and the Purdue Spatial Visualization Test: Rotations (PSVT:R). Using qualitative and quantitative analyses, results indicated that the CITYgreen GIS group learned the environmental content better than the MOSS group. The MOSS group better understood how to design experiments and to use GIS to analyze problem questions. Both groups improved in problem identification and problem solving, data accuracy, and hypothesis testing. The spatial reasoning score was compared to learning style as reported on the LSI, and other spatial experiences as reported on the SES. Males scored higher than females on the spatial reasoning test, the more computer games played the higher the score, and the fewer shop classes taken the higher the score. Results indicated that 75% of the teachers' integrated GIS into classroom instruction two years after the GIS workshop. Even though teaching experience was negatively related to spatial reasoning test scores, implementation of GIS by teachers in the workshop was not influenced by years of teaching experience. The results indicate that GIS can be universally used for classroom instruction.
González-García, E; Tesniere, A; Camous, S; Bocquier, F; Barillet, F; Hassoun, P
2015-01-01
Effects of parity (primiparous, PRIM vs multiparous, MULT) and litter size (singletons, SING vs twins, TWIN) on metabolic profiles from 1 wk before lambing to the end of lactation were studied in 48 Lacaune dairy ewes reared in confinement during most of the year and grazed on improved pastures at the end of lactation (summer). Another group of 48 ewes was incorporated during the milking period (ie, from 1 wk after weaning), to measure the effects of milking frequency (1 vs 2 milkings per day) on intake, milk production and composition, and body energy usage. Thus, in a 2 × 2 × 2 factorial design, ewes (n = 96) were allocated to homogeneous groups according to body weight (BW) and body condition score (BCS) and were monitored from late pregnancy to late lactation as a function of parity (PRIM, n = 48; MULT, n = 48), litter size (LSi) (SING, n = 40; TWIN, n = 56) and daily milking frequency (FREQ; milked once, ONE; n = 48; or twice, TWO; n = 48). Individual BW, BCS, plasma metabolites, and metabolic hormones were measured regularly (ie, 9 consecutive sampling dates). The BW was higher in MULT but no differences because of LSi or FREQ were detected at the intra-parity group level. The BCS was higher in MULT and in ewes with SING throughout the experiment. The latter was related to the demands for body reserves mobilization, as expressed by higher nonesterified fatty acids and β-hydroxybutyrate concentrations in ewes with TWIN from late pregnancy to weaning (35 d postpartum) in both PRIM and MULT ewes. This was consistent with higher insulin in MULT and higher triiodothyronine, leptin and insulin-like growth factor 1 in ewes with SING during this period. Differences in energy balance because of FREQ were evident after interpretation of plasma nonesterified fatty acids, glucose, insulin, and leptin concentration during the milking period. At similar feed intakes, ewes in ONE were in positive balance with regard to TWO. Overall, clear effects of parity, LSi, physiological states, and FREQ on metabolic profiles were found because of differences in nutrient partitioning when combining these experimental factors. Without considering FREQ, changes in metabolic measures in milking period were marginal compared with the periparturient adjustments performed until weaning to compensate energy deficiencies. Copyright © 2015 Elsevier Inc. All rights reserved.
Myer, Gregory D.; Martin, Larry; Ford, Kevin R.; Paterno, Mark V.; Schmitt, Laura C.; Heidt, Robert S.; Colosimo, Angelo; Hewett, Timothy E.
2014-01-01
Background Release for full activity and return to sport after anterior cruciate ligament reconstruction (ACLR) is often dictated by time from surgery and subjective opinion by the medical team. Temporal guidelines for return to sport may not accurately identify impaired strength and neuromuscular control, which are associated with increased risk for second injury (contralateral and/or ipsilateral limb) after ACLR in athletes. Hypotheses Athletes undergoing ACLR and returning to sport would demonstrate functional deficits that would not be associated with time from surgery. Study Design Controlled laboratory study. Methods Thirty-three male (n = 10) and female (n = 23) athletes with unilateral ACLR, who were cleared by a physician to return to their sport after surgery and rehabilitation, performed the single-legged vertical hop test for 10 seconds on a portable force plate. Matched teammates of each patient were recruited to serve as sex-, sport-, and age-matched controls (CTRL; n = 67). Maximum vertical ground-reaction force (VGRF) was measured during each single-limb landing. Single-limb symmetry index (LSI) was calculated as the ratio of the involved divided by uninvolved limb, expressed as a percentage. Results The single-limb vertical jump height LSI was reduced in the ACLR group, 89% (95% confidence interval [CI], 83%–95%), compared with the matched CTRL group, 101% (95% CI, 96%–105%; P<.01). The LSI for VGRF normalized to potential energy achieved during flight of the hop was increased in ACLR at 112% (95% CI, 106%–117%) relative to the CTRL group at 102% (95% CI, 98%–106%; P<.01). Linear regression analysis indicated that time from surgery was not associated with limb symmetry deficits in the ACLR group (P >.05; R2 = .002–.01). Conclusion Deficits in unilateral force development (vertical jump height) and absorption (normalized VGRF) persist in an athlete’s single-limb performance after ACLR and full return to sports. These symmetry deficits appear to be independent of time after reconstruction. Clinical Relevance On the basis of these results, clinicians should consider assessment of single-limb power performance in the decision-making process for return-to-sport release. Persistent side-to-side asymmetries may increase the risk of contralateral and/or ipsilateral injury. PMID:22879403
Learning styles of medical students change in relation to time.
Gurpinar, Erol; Bati, Hilal; Tetik, Cihat
2011-09-01
The aim of the present study was to investigate if any changes exist in the learning styles of medical students over time and in relation to different curriculum models with these learning styles. This prospective cohort study was conducted in three different medical faculties, which implement problem-based learning (PBL), hybrid, and integrated curriculum models. The study instruments were Kolb's Learning Style Inventory (LSI) and a questionnaire describing the students' demographic characteristics. Sample selection was not done, and all first-year students (n = 547) were targeted. This study was designed in two phases. In the first year, the study instruments were delivered to the target group. The next year, the same instruments were delivered again to those who had fully completed the first questionnaire (n = 525). Of these, 455 students had completed the instruments truly and constituted the study group. The majority of the students were assimilators and convergers in both the first and second years. A change in learning style was observed between 2 yr in 46.9% of the students in the integrated curriculum, in 49.3% of the students in the hybrid curriculum, and 56.4% of the students in the PBL curriculum. The least and most changes observed between the learning style groups were in assimilators and divergers, respectively. Curriculum models and other independent variables had no significant effect on the change between learning styles. The learning styles of medical students may change over time. Further followup studies in larger groups are needed to clarify this relation.
An Inquiry into the Cost of Post Deployment Software Support (PDSS)
1989-09-01
Equations .......... ii vi AFIT/GLM/LSY/835- I0 The increasing cost of software maintenance is taking a larger share of the military bidget each year... increments as needed (3:59). The second page of tne Form 75 starts with a section stating how the hours, and consequently the funds, will be allocated to...length of time required, the timeline can be in hourly, weekly, mnunthly, or quarterly increments . Some milestones included are formal approval, test
Lessons from the Army’s Future Combat Systems Program
2012-01-01
FCS, from the Aviation Center at Fort Rucker, Alabama, to the Chemical and Engineer Schools at Fort Leonard Wood , Mis- souri.75 The objective was to...Engineer) and Robert Woods (MGV LSI Chief Engineer), “MGV Platform Review,” circa February 2009. Not available to the general public. 22 Daniel Wasserbly...Acquisition Decision Memo- randum,” memorandum for Secretary of the Army, June 23, 2009. 59 Matt Donohue, Kris Gardner, and Major Scot Greig, “Future Combat
Methods, Software and Tools for Three Numerical Applications. Final report
DOE Office of Scientific and Technical Information (OSTI.GOV)
E. R. Jessup
2000-03-01
This is a report of the results of the authors work supported by DOE contract DE-FG03-97ER25325. They proposed to study three numerical problems. They are: (1) the extension of the PMESC parallel programming library; (2) the development of algorithms and software for certain generalized eigenvalue and singular value (SVD) problems, and (3) the application of techniques of linear algebra to an information retrieval technique known as latent semantic indexing (LSI).
Advanced Electrical Test Techniques for LSI Microcircuits.
1982-03-01
high resistance polysilicon load resistors stacked in the "Z" direction for higher packing density. Featuring resistors typically in the gigaohm range...are made up of "N" diffusions, metal and/or polysilicon lines, and transistors, they are subject to leakage defects. If the leakage of the nonconducting...reference 7) show- ing a poor connection from the FF lead resistor ( Polysilicon ) to the Vcc or the transistor. The FF layout of Figure 1B shows that
Cytogenetic investigations of chronic lymphocytic leukemia.
Wren, Catherine; Moriarty, Helen; Marsden, Katherine; Tegg, Elizabeth
2010-04-15
This study aimed to determine which culture method would yield the highest culture success rate, mitotic index, banding resolution, and abnormality rate in investigation of patients with chronic lymphocytic leukemia (CLL). A range of culture techniques for conventional cytogenetic (CC) analyses was compared: 24-hour unstimulated, 72 hours incubation with additional fetal calf serum, 72 hours stimulation with interleukin 4, 72 hours stimulation with lipopolysaccharide (LPS), 72 hours stimulation with TPA (12-O-tetradecanoylphorbol 13-acetate), and 72 hours stimulation with CpG-oligonucleotide DSP30 + Interleukin-2 (IL-2). CC abnormality rates were also compared to fluorescence in situ hybridization (FISH) results using probes for CLL (LSI D13S319/13q34/CEP 12: LSI ATM/p53). Forty-five samples from 24 patients (consisting of 11 newly diagnosed and 13 previously diagnosed patients) were included. For CC, a 100.0% culture success rate was achieved (n = 45) by means of an EDTA (ethylenediaminetetraacetic acid) peripheral blood sample with an associated 62.5% CC abnormality rate (n = 24). FISH detected an abnormality rate of 75.0% (n = 24). The combined CC and FISH abnormality rate was 87.5% (n = 24). This study demonstrates that CC that uses TPA and DSP30 + IL-2 on EDTA peripheral blood is effective in the investigation of CLL and may be used as a supplement to FISH studies. Copyright 2010 Elsevier Inc. All rights reserved.
Involvement of Silicon Influx Transporter OsNIP2;1 in Selenite Uptake in Rice1[W][OA
Zhao, Xue Qiang; Mitani, Namiki; Yamaji, Naoki; Shen, Ren Fang; Ma, Jian Feng
2010-01-01
Rice (Oryza sativa) as a staple food, provides a major source of dietary selenium (Se) for humans, which essentially requires Se, however, the molecular mechanism for Se uptake is still poorly understood. Herein, we show evidence that the uptake of selenite, a main bioavailable form of Se in paddy soils, is mediated by a silicon (Si) influx transporter Lsi1 (OsNIP2;1) in rice. Defect of OsNIP2;1 resulted in a significant decrease in the Se concentration of the shoots and xylem sap when selenite was given. However, there was no difference in the Se concentration between the wild-type rice and mutant of OsNIP2;1 when selenate was supplied. A short-term uptake experiment showed that selenite uptake greatly increased with decreasing pH in the external solution. Si as silicic acid did not inhibit the Se uptake from selenite in both rice and yeast (Saccharomyces cerevisiae) at low pHs. Expression of OsNIP2;1 in yeast enhanced the selenite uptake at pH 3.5 and 5.5 but not at pH 7.5. On the other hand, defect of Si efflux transporter Lsi2 did not affect the uptake of Se either from selenite or selenate. Taken together, our results indicate that Si influx transporter OsNIP2;1 is permeable to selenite. PMID:20498338
FIR: An Effective Scheme for Extracting Useful Metadata from Social Media.
Chen, Long-Sheng; Lin, Zue-Cheng; Chang, Jing-Rong
2015-11-01
Recently, the use of social media for health information exchange is expanding among patients, physicians, and other health care professionals. In medical areas, social media allows non-experts to access, interpret, and generate medical information for their own care and the care of others. Researchers paid much attention on social media in medical educations, patient-pharmacist communications, adverse drug reactions detection, impacts of social media on medicine and healthcare, and so on. However, relatively few papers discuss how to extract useful knowledge from a huge amount of textual comments in social media effectively. Therefore, this study aims to propose a Fuzzy adaptive resonance theory network based Information Retrieval (FIR) scheme by combining Fuzzy adaptive resonance theory (ART) network, Latent Semantic Indexing (LSI), and association rules (AR) discovery to extract knowledge from social media. In our FIR scheme, Fuzzy ART network firstly has been employed to segment comments. Next, for each customer segment, we use LSI technique to retrieve important keywords. Then, in order to make the extracted keywords understandable, association rules mining is presented to organize these extracted keywords to build metadata. These extracted useful voices of customers will be transformed into design needs by using Quality Function Deployment (QFD) for further decision making. Unlike conventional information retrieval techniques which acquire too many keywords to get key points, our FIR scheme can extract understandable metadata from social media.
Batchelar, Katharina L; Kidd, Karen A; Drevnick, Paul E; Munkittrick, Kelly R; Burgess, Neil M; Roberts, Aaron P; Smith, James D
2013-03-01
Few studies have investigated the effects of mercury (Hg) on wild fish from remote areas, even though these fish can have high total Hg concentrations. In Kejimkujik National Park and National Historic Site (KNPNHS), Nova Scotia, Canada, concentrations of total Hg in many yellow perch (Perca flavescens) currently exceed the estimated threshold level for adverse effects in fish (0.2 µg Hg g(-1) (wet wt), whole body). To determine whether Hg exposure is adversely affecting the general health of these fish, the authors collected male and female perch in the fall of 2009 and 2010 from 12 lakes within KNPNHS. The health endpoints condition, liver somatic index (LSI), and macrophage aggregates (MAs; indicators of oxidative stress and tissue damage) in the liver, kidney, and spleen were examined, and in female perch were compared between lakes and related to Hg concentrations measured in the muscle and liver tissue. No negative relationships between fish condition or LSI and Hg were found. However, within the liver, kidney, and spleen tissues of females, the relative area occupied by MAs was positively related to both muscle and liver Hg concentrations, indicating the health of these perch was adversely affected at the cellular level. These findings raise concerns for the health of these perch as well as for other wild fish populations known to have similarly elevated Hg concentrations. Copyright © 2013 SETAC.
Material deprivation and health: a longitudinal study.
Tøge, Anne Grete; Bell, Ruth
2016-08-08
Does material deprivation affect the consequences of ill health? Answering this question requires that we move beyond the effects of income. Longitudinal data on material deprivation, longstanding illness and limiting longstanding illness enables investigations of the effects of material deprivation on risk of limiting longstanding illness. This study investigates whether a shift from affording to not affording a car predicts the probability of limiting longstanding ill (LLSI). The 2008-2011 longitudinal panel of Statistics on Income, Social Inclusion and Living Conditions (EU-SILC) is utilised. Longitudinal fixed effects logit models are applied, using LLSI as dependent variable. Transition from affording a car to not affording a car is used as a proxy for material deprivation. All models are controlled for whether the person becomes longstanding ill (LSI) as well as other time-variant covariates that could affect the results. The analysis shows a statistically significant increased odds ratio of LLSI when individuals no longer can afford a car, after controlling for confounders and LSI in the previous year (1.129, CI = 1.022-1.248). However, when restricting the sample to observations where respondents report longstanding illness the results are no longer significant (1.032, CI = 0.910-1.171). The results indicate an individual level effect of material deprivation on LLSI, suggesting that material resources can affect the consequences of ill health.
Rapid Damage Assessment. Volume II. Development and Testing of Rapid Damage Assessment System.
1981-02-01
pixels/s Camera Line Rate 732.4 lines/s Pixels per Line 1728 video 314 blank 4 line number (binary) 2 run number (BCD) 2048 total Pixel Resolution 8 bits...sists of an LSI-ll microprocessor, a VDI -200 video display processor, an FD-2 dual floppy diskette subsystem, an FT-I function key-trackball module...COMPONENT LIST FOR IMAGE PROCESSOR SYSTEM IMAGE PROCESSOR SYSTEM VIEWS I VDI -200 Display Processor Racks, Table FD-2 Dual Floppy Diskette Subsystem FT-l
Micromachining technology for thermal ink-jet products
NASA Astrophysics Data System (ADS)
Verdonckt-Vandebroek, Sophie
1997-09-01
This paper reviews recent trends and evolutions in the low- end color printing market which is currently dominated by thermal inkjet (TIJ) based products. Micro electromechanical systems technology has been an enabler for the unprecedented cost/performance ratio of these printing products. The generic TIJ operating principles are based on an intimate blend of thermodynamics, fluid dynamics and LSI electronics. The key principles and design issues are outlined and the fabrication of TIJ printheads illustrated with an implementation by the Xerox Corporation.
CAMAC: A Unique Application with a Pocket Terminal.
1982-09-16
POCKET TERMINAL S. PERFORMING ORG. REPORT NUMSIER I. AUTWOR(o) S. CONTRACT OR GRANT NUMU41’e() A.D. Elmond S. PERFORMING ORGANIZATION NAME AND ADORIESS 10...port of any CAMAC crate. In addition to being a maintenance device, the HHTT is a " smart " device that can control operations in a CAMAC crate. The...system LSI 11/23 microprocessor through an Asynchronous Serial Port (ASP) interface module. This ASP interface consists of: 1) Crystal Clock 2) MIK -Bus
South Atlantic Islands. Section 23. Weather and Climate
1960-05-01
NOT RELEPASABLE TO FOREIGN NATIONALS PAav 23-13 NIS 64 AIR FORCE -MAY 1960 to 0000 Ist I00 W 0000 151O IS 200 LSI so no so 8 40 40 #0 40 40 40 40...IAV JV’Nit .1 11(1 SI (-ri NO o IKv A N N ViHS IWOi Asceiilon Island ...... Niux 85 87 88 88 87 85 84 83 82 83 83 84 88 20) MmN11 73 74 75 75 74 73 72
Method of examining microcircuit patterns
NASA Technical Reports Server (NTRS)
Suszko, S. F. (Inventor)
1986-01-01
Examination of microstructures of LSI and VLSI devices is facilitated by employing a method in which the device is photographed through a darkfield illumination optical microscope and the resulting negative subjected to inverse processing to form a positive on a photographic film. The film is then developed to form photographic prints or transparencies which clearly illustrate the structure of the device. The entire structure of a device may be examined by alternately photographing the device and selectively etching layers of the device in order to expose underlying layers.
Spring, 1980, DECUS symposium review
DOE Office of Scientific and Technical Information (OSTI.GOV)
Allen, M.J.; Duffy, J.M.; McDonald, W.M.
1980-10-24
The Digital Equipment Computer Users Society (DECUS) holds biannual symposia where its membership and the host company can exchange ideas, problems, and solutions. This report by the newly formed DECUS Local User Group at LLL collects information gathered at the Spring '80 symposium in Chicago on April 22-25. Information is presented for the following special interest groups (SIGs): RSX/IAS SIG, VAX/VSM SIG, PASCAL (languages) SIG, networks SIG, TECO SIG, LSI-11 SIG, RT-11 SIG, site manager SIG, and database SIG. (RWR)
Automating the Transformational Development of Software. Volume 2. Appendices.
1983-03-01
reposled) Equivalence declaration lists AddNewVa r 1 6.20 Map mwaoulsdjuckagefiestinaion~a * UnfoldDemon 2 6.21 Unfold miisroifld~package*esination.. est ...forall reference-loctiontRRR,sp*c- do Remove RR from spec 2) Apply PmovE.~Fuanecam~ATI~m( N) [ You can remove a relation Nf you can remove all...Reformulate V as =lsi(name(*)) fi you can find a sequence containing the same type of objects as V then you may be able to change V into a specific
Baseband processor development/test performance for 30/20 GHz SS-TDMA communication system
NASA Technical Reports Server (NTRS)
Brown, L.; Sabourin, D.; Attwood, S.
1984-01-01
The baseband processor (BBP) development for the 30/20 GHz Satellite Communication System is described. The SS-TDMA concept for future satellite communications is reviewed, describing the overall system, the satellite payload, and the frequency plan. A brief general description of the BBP is given, and the proof-of-concept model of the BBP is summarized. Key technologies and custom LSI developed for the BBP are listed. Finally, key technology developments and test data are reported for the BBP.
A Signal Averager Interface between a Biomation 6500 Transient Recorder and a LSI-11 Microcomputer.
1980-06-01
decode the proper bus synchronizing signals. SA data lines 1 and 2 are decoded to produce SELO L - SEL4 L which select one of four SA registers. The...J42 A > SACCI..N.. 31 is41 4--.----(~~#I)I MMELYH-[@- T~. S5 46NI INI 404 II CSkN M.3 > ____ ____47 INWO L 3CSRRD L U SEL4 L MRPLY L t5CSRWHB H OUTHB L
An Approach to Providing a User Interface for Military Computer-Aided- Instruction in 1980
1975-11-01
commercial terminals is the use of a microprocessor unit ( MPU ) LSI chip controller. This technology is flexible and economical •nd can be expected to...various «•gmentt. By using an MPU and developing a software capability, tha vendor can quickly and economically satisfy a large spsctrum of user...the basis for an effective and economical jser interface to military CAI systems. •a. sicumrv CLAMincATioH or THIS P**;:^*— D*. K*fn4) ^vmm m m r
1975-10-01
If A-5 (ItA) gym IpA) Em (jpA) I point 8 POWntC TIME (me) Threshold - Figure A-1, Reapauise of Filter Sytm No. 2 to Prototype (aIide Slope Fat No. 1...II A-51 (ft (,sA) (pA) (pA) * ICt . IMDAt TO Cot A DH TIME~)FFareJ Figura A-21. Responses of the CV-880 Aircraft wil~h LSI Automatic Landing System and
PNPN Latchup in Bipolar LSI Devices.
1982-01-01
6611, J. Ritter ATTN: STEWS -TE-N, T. Arellanes ATTN: Code 6612, G. McLane ATTN: STEWS -TE-AN, R. Dutchover ATTN: Code 6816, H. Hughes ATTN: STEWS -TE...AN, R. Hays ATTN: Code 6653, A. Namenson * ATTN: STEWS -TE-N, K. Cummings ATTN: Code 6611, L. August ATTN: STEWS -TE-NT, M. Squires ATTN: Code 6813, J...Killiany ATTN: STEWS -TE-AN, J. Meason ATTN: Code 6600, J. Schriempf ATTN: STEWS -TE-AN, A. De La Paz ATTN: Code 6610, R. Marlow USA MATTN: Code 2627USA
DOE Office of Scientific and Technical Information (OSTI.GOV)
Iga, K.
1996-12-31
Vertical optical interconnects of LSI chips and circuit boards and multiple fiber systems may be the most interesting field related to SE lasers. From this point of view, the device should be small as possible. The future process technology for it including epitaxy and etching will drastically change the situation of SE lasers. Dome optical technologies are already introduced in various subsystems, but the arrayed microoptic technology would be very helpful for advanced systems.
NASA Astrophysics Data System (ADS)
Krishna Kumar, S.; Hari Babu, S.; Eswar Rao, P.; Selvakumar, S.; Thivya, C.; Muralidharan, S.; Jeyabal, G.
2017-09-01
Water quality of Tiruvallur Taluk of Tiruvallur district, Tamil Nadu, India has been analysed to assess its suitability in relation to domestic and agricultural uses. Thirty water samples, including 8 surface water (S), 22 groundwater samples [15 shallow ground waters (SW) and 7 deep ground waters (DW)], were collected to assess the various physico-chemical parameters such as Temperature, pH, Electrical conductivity (EC), Total dissolved solids (TDS), cations (Ca, Mg, Na, K), anions (CO3, HCO3, Cl, SO4, NO3, PO4) and trace elements (Fe, Mn, Zn). Various irrigation water quality diagrams and parameters such as United states salinity laboratory (USSL), Wilcox, sodium absorption ratio (SAR), sodium percentage (Na %), Residual sodium carbonate (RSC), Residual Sodium Bicarbonate (RSBC) and Kelley's ratio revealed that most of the water samples are suitable for irrigation. Langelier Saturation Index (LSI) values suggest that the water is slightly corrosive and non-scale forming in nature. Gibbs plot suggests that the study area is dominated by evaporation and rock-water dominance process. Piper plot indicates the chemical composition of water, chiefly controlled by dissolution and mixing of irrigation return flow.
Leisure activities and attitude of institutionalized elderly people: a basis for nursing practice1
de Castro, Vivian Carla; Carreira, Lígia
2015-01-01
Aim: to identify the leisure activities performed in Long-Stay Institutions for the Elderly (LSIEs), registered in the city of Maringá-PR, Brazil, and to analyze the attitude of the elderly people toward leisure promoted by the institutions. METHOD: this was a descriptive and transversal study with a quantitative approach, carried out with 97 elderly people, through the establishment of the socio-demographic profile and the application of the Leisure Attitude Scale. The data was subjected to descriptive statistical analysis, association tests (chi-square or Fisher's) and Spearman's correlation. RESULTS: males, aged 80 or over, widowed, with one to eight years of study, who had a monthly income were predominant. Age group and income were significantly associated with the performance of leisure activities. The results reflected the positive attitude of the elderly people in relation to leisure activities, except in the behavioral component. CONCLUSION: the findings of this study indicate the need for further investigation into the difficulties linked to the attitude toward leisure in the behavioral component, considering aspects such as individual concepts of leisure and the health status of the elderly people. PMID:26039302
Quantitative analysis of a scar's pliability, perfusion and metrology
NASA Astrophysics Data System (ADS)
Gonzalez, Mariacarla; Sevilla, Nicole; Chue-Sang, Joseph; Ramella-Roman, Jessica C.
2017-02-01
The primary effect of scarring is the loss of function in the affected area. Scarring also leads to physical and psychological problems that could be devastating to the patient's life. Currently, scar assessment is highly subjective and physician dependent. The examination relies on the expertise of the physician to determine the characteristics of the scar by touch and visual examination using the Vancouver scar scale (VSS), which categorizes scars depending on pigmentation, pliability, height and vascularity. In order to establish diagnostic guidelines for scar formation, a quantitative, accurate assessment method needs to be developed. An instrument capable of measuring all categories was developed; three of the aforementioned parameters will be explored. In order to look at pliability, a durometer which measures the amount of resistance a surface exerts to prevent the permanent indentation of the surface is used due to its simplicity and quantitative output. To look at height and vascularity, a profilometry system that collects the location of the scar in three-dimensions and laser speckle imaging (LSI), which shows the dynamic changes in perfusion, respectively, are used. Gelatin phantoms were utilized to measure pliability. Finally, dynamic changes in skin perfusion of volunteers' forearms undergoing pressure cuff occlusion were measured, along with incisional scars.
Ní Mhaoláin, Aine M; Gallagher, Damien; O Connell, Henry; Chin, A V; Bruce, Irene; Hamilton, Fiona; Teehee, Erin; Coen, Robert; Coakley, Davis; Cunningham, Conal; Walsh, J B; Lawlor, Brian A
2012-02-01
Life satisfaction is a subjective expression of well-being and successful aging. Subjective well-being is a major determinant of health outcomes in older people. The aim of this study was to determine which factors predicted well-being in older people living in the community as measured by their satisfaction with life. The relationship between life satisfaction, as measured by the Life Satisfaction Index (LSI-A) and physical, cognitive and demographic variables was examined in 466 older people living in the community using a stepwise regression model. Depression, loneliness, neuroticism, extraversion, recent participation in physical activity, age and self-reported exhaustion, were the independent predictors of life satisfaction in our elderly cohort. Subjective well-being, as measured by the Life Satisfaction Scale, is predicted by depression, loneliness, personality traits, recent participation in physical activity and self-reported exhaustion. The mental and emotional status of older individuals, as well as their engagement in physical activity, are as important as physical functionality when it comes to life satisfaction as a measure of well-being and successful aging. These areas represent key targets for intervention.
Wu, Xiaoying; Yu, Yaoguang; Baerson, Scott R.; Song, Yuanyuan; Liang, Guohua; Ding, Chaohui; Niu, Jinbo; Pan, Zhiqiang; Zeng, Rensen
2017-01-01
Nitrogen (N) and silicon (Si) are two important nutritional elements required for plant growth, and both impact host plant resistance toward insect herbivores. The interaction between the two elements may therefore play a significant role in determining host plant resistance. We investigated this interaction in rice (Oryza sativa L.) and its effect on resistance to the herbivore brown planthopper Nilaparvata lugens (BPH). Our results indicate that high-level (5.76 mM) N fertilization reduced Si accumulation in rice leaves, and furthermore, this decrease was likely due to decreased expression of Si transporters OsLsi1 and OsLsi2. Conversely, reduced N accumulation was observed at high N fertilization levels when Si was exogenously provided, and this was associated with down-regulation of OsAMT1;1 and OsGS1;1, which are involved in ammonium uptake and assimilation, respectively. Under lower N fertilization levels (0.72 and/or 1.44 mM), Si amendment resulted in increased OsNRT1:1, OsGS2, OsFd-GOGAT, OsNADH-GOGAT2, and OsGDH2 expression. Additionally, bioassays revealed that high N fertilization level significantly decreased rice resistance to BPH, and the opposite effect was observed when Si was provided. These results provide additional insight into the antagonistic interaction between Si and N accumulation in rice, and the effects on plant growth and susceptibility to herbivores. PMID:28167952
Potential corrosivity of untreated groundwater in the United States
Belitz, Kenneth; Jurgens, Bryant C.; Johnson, Tyler D.
2016-07-12
Corrosive groundwater, if untreated, can dissolve lead and other metals from pipes and other components in water distribution systems. Two indicators of potential corrosivity—the Langelier Saturation Index (LSI) and the Potential to Promote Galvanic Corrosion (PPGC)—were used to identify which areas in the United States might be more susceptible to elevated concentrations of metals in household drinking water and which areas might be less susceptible. On the basis of the LSI, about one-third of the samples collected from about 21,000 groundwater sites are classified as potentially corrosive. On the basis of the PPGC, about two-thirds of the samples collected from about 27,000 groundwater sites are classified as moderate PPGC, and about one-tenth as high PPGC. Potentially corrosive groundwater occurs in all 50 states and the District of Columbia.National maps have been prepared to identify the occurrence of potentially corrosive groundwater in the 50 states and the District of Columbia. Eleven states and the District of Columbia were classified as having a very high prevalence of potentially corrosive groundwater, 14 states as having a high prevalence of potentially corrosive groundwater, 19 states as having a moderate prevalence of potentially corrosive groundwater, and 6 states as having a low prevalence of potentially corrosive groundwater. These findings have the greatest implication for people dependent on untreated groundwater for drinking water, such as the 44 million people that are self-supplied and depend on domestic wells or springs for their water supply.
Sedinger, James S.; Schamber, Jason L.; Ward, David H.; Nicolai, Christopher A.; Conant, Bruce
2011-01-01
We used observations of individually marked female black brant geese (Branta bernicla nigricans; brant) at three wintering lagoons on the Pacific coast of Baja California—Laguna San Ignacio (LSI), Laguna Ojo de Liebre (LOL), and Bahía San Quintín (BSQ)—and the Tutakoke River breeding colony in Alaska to assess hypotheses about carryover effects on breeding and distribution of individuals among wintering areas. We estimated transition probabilities from wintering locations to breeding and nonbreeding by using multistratum robust-design capture-mark-recapture models. We also examined the effect of breeding on migration to wintering areas to assess the hypothesis that individuals in family groups occupied higher-quality wintering locations. We used 4,538 unique female brant in our analysis of the relationship between winter location and breeding probability. All competitive models of breeding probability contained additive effects of wintering location and the 1997–1998 El Niño–Southern Oscillation (ENSO) event on probability of breeding. Probability of breeding in non-ENSO years was 0.98 ± 0.02, 0.68 ± 0.04, and 0.91 ± 0.11 for females wintering at BSQ, LOL, and LSI, respectively. After the 1997–1998 ENSO event, breeding probability was between 2% (BSQ) and 38% (LOL) lower than in other years. Individuals that bred had the highest probability of migrating the next fall to the wintering area producing the highest probability of breeding.
Abnormal lung sounds in patients with asthma during episodes with normal lung function.
Schreur, H J; Vanderschoot, J; Zwinderman, A H; Dijkman, J H; Sterk, P J
1994-07-01
Even in patients with clinically stable asthma with normal lung function, the airways are characterized by inflammatory changes, including mucosal swelling. In order to investigate whether lung sounds can distinguish these subjects from normal subjects, we compared lung sound characteristics between eight normal and nine symptom-free subjects with mild asthma. All subjects underwent simultaneous recordings of airflow, lung volume changes, and lung sounds during standardized quiet breathing, and during forced maneuvers. Flow-dependent power spectra were computed using fast Fourier transform. For each spectrum we determined lung sound intensity (LSI), frequencies (Q25%, Q50%, Q75%) wheezing (W), and W%. The results were analyzed by ANOVA. During expiration, LSI was lower in patients with asthma than in healthy controls, in particular at relatively low airflow values. During quiet expiration, Q25% to Q75% were higher in asthmatics than in healthy controls, while the change of Q25% to Q75% with flow was greater in asthmatic than in normal subjects. The W and W% were not different between the subject groups. The results indicate that at given airflows, lung sounds are lower in intensity and higher in pitch in asthmatics as compared with controls. This suggests that the generation and/or transmission of lung sounds in symptom-free patients with stable asthma differ from that in normal subjects, even when lung function is within the normal range. Therefore, airflow standardized phonopneumography might reflect morphologic changes in airways of patients with asthma.
Lai, Yue-Yun; Feng, Lin; Wang, Zheng; Lü, Shan; Dang, Hui; Shi, Yan; He, Qi; Huang, Xiao-Jun
2010-02-01
This study was aimed to verify the efficacy of home-made LSI bcr/abl ES probe for detection of bcr/abl fusion gene and derivative chromosome 9 deletions in chronic myeloid leukemia (CML). Fluorescence in situ hybridization (FISH) was carried out with dual color bcr/abl extra signal (ES) probe in 97 cases of CML based on morphology and cytogenetic karyotype and 129 cases of non-hematological malignancies/non-myeloproliferative diseases with normal cytogenetic karyotype. For the patients with signals of 1R1G1F indicating der(9) deletions, FISH were done using ASS DNA probe. The results showed that 91 cases with standard t(9;22) and 6 cases with variant translocation of t(9;22) were detected by conventional G banding technique. All of the 97 patients displayed bcr/abl fusion gene by ES-FISH, including 16 cases with signal patterns of 1R1G1F showing der(9) deletions. Among the 16 cases with der(9) deletions, 13 cases were detected to have deletions of ASS gene. Meanwhile, none of the 129 cases of negative control showed bcr/abl fusion gene by ES-FISH. It is concluded that home-made LSI bcr/abl ES probe is effective to identify the bcr/abl fusion gene and der(9) deletions in CML, and the ES-FISH results are consistent with conventional cytogenetic karyotype.
Szyperski, Piotr D
2018-06-01
The purpose of this research was to evaluate the applicability of the fractal dimension (FD) estimators to assess lateral shearing interferometric (LSI) measurements of tear film surface quality. Retrospective recordings of tear film measured with LSI were used: 69 from healthy subjects and 41 from patients diagnosed with dry eye syndrome. Five surface quality descriptors were considered, four based on FD and a previously reported descriptor operating in a spatial frequency domain (M 2 ), presenting temporal kinetics of post-blink tear film. A set of 12 regression parameters has been extracted and analyzed for classification purposes. The classifiers are assessed in terms of receiver operating characteristics and areas under their curves (AUC). Also, the computational loads are estimated. The maximum AUC of 82.4% was achieved for M 2 , closely followed by the binary box-counting (BBC) FD estimator with AUC=78.6%. For all descriptors, statistically significant differences between the subject groups were found (p<0.05). The BBC FD estimator was characterized with the highest empirical computational efficiency that was about 30% faster than that of M 2 , while that based on the differential box-counting exhibited the lowest efficiency (4.5 times slower than the best one). Concluding, FD estimators can be utilized for quantitative assessment of tear film kinetics. They provide a viable alternative to previously used spectral counter parameters, and at the same time allow higher computational efficiency.
2014-01-01
Background Silicon (Si) application has been known to enhance the tolerance of plants against abiotic stresses. However, the protective mechanism of Si under heavy metals contamination is poorly understood. The aim of this study was to assess the role of Si in counteracting toxicity due to cadmium (Cd) and copper (Cu) in rice plants (Oryza sativa). Results Si significantly improved the growth and biomass of rice plants and reduced the toxic effects of Cd/Cu after different stress periods. Si treatment ameliorated root function and structure compared with non-treated rice plants, which suffered severe root damage. In the presence of Si, the Cd/Cu concentration was significantly lower in rice plants, and there was also a reduction in lipid peroxidation and fatty acid desaturation in plant tissues. The reduced uptake of metals in the roots modulated the signaling of phytohormones involved in responses to stress and host defense, such as abscisic acid, jasmonic acid, and salicylic acid. Furthermore, the low concentration of metals significantly down regulated the mRNA expression of enzymes encoding heavy metal transporters (OsHMA2 and OsHMA3) in Si-metal-treated rice plants. Genes responsible for Si transport (OsLSi1 and OsLSi2), showed a significant up-regulation of mRNA expression with Si treatment in rice plants. Conclusion The present study supports the active role of Si in the regulation of stresses from heavy metal exposure through changes in root morphology. PMID:24405887
Development of a simultaneous optical/PET imaging system for awake mice
NASA Astrophysics Data System (ADS)
Takuwa, Hiroyuki; Ikoma, Yoko; Yoshida, Eiji; Tashima, Hideaki; Wakizaka, Hidekatsu; Shinaji, Tetsuya; Yamaya, Taiga
2016-09-01
Simultaneous measurements of multiple physiological parameters are essential for the study of brain disease mechanisms and the development of suitable therapies to treat them. In this study, we developed a measurement system for simultaneous optical imaging and PET for awake mice. The key elements of this system are the OpenPET, optical imaging and fixation apparatus for an awake mouse. The OpenPET is our original open-type PET geometry, which can be used in combination with another device because of the easily accessible open space of the former. A small prototype of the axial shift single-ring OpenPET was used. The objective lens for optical imaging with a mounted charge-coupled device camera was placed inside the open space of the AS-SROP. Our original fixation apparatus to hold an awake mouse was also applied. As a first application of this system, simultaneous measurements of cerebral blood flow (CBF) by laser speckle imaging (LSI) and [11C]raclopride-PET were performed under control and 5% CO2 inhalation (hypercapnia) conditions. Our system successfully obtained the CBF and [11C]raclopride radioactivity concentration simultaneously. Accumulation of [11C]raclopride was observed in the striatum where the density of dopamine D2 receptors is high. LSI measurements could be stably performed for more than 60 minutes. Increased CBF induced by hypercapnia was observed while CBF under the control condition was stable. We concluded that our imaging system should be useful for investigating the mechanisms of brain diseases in awake animal models.
Hoog, Philipp; Warren, Meghan; Smith, Craig A.
2016-01-01
Background Although functional tests including the single leg hop (SLH), triple hop (TH), cross over hop (COH) for distance, and the tuck jump assessment (TJA) are used for return to play (RTP) criteria for post anterior cruciate ligament (ACL) injury, sport-specific baseline measurements are limited. Purpose The purpose of this study was to examine differences in SLH, TH, and COH distance and limb symmetry index (LSI), as well as total scores, number of jumps, and individual flaws of the TJA in 97 injury-free Division I (DI) collegiate female student athletes participating in ACL injury prone vs. non ACL injury prone sports. The hypothesis was that significant mean differences and asymmetries (LSI) would exist between the two groups in SLH, TH, COH and TJA. Study Design Cross sectional. Methods Due to research suggesting inherent ACL injury risk associated with specific sport involvement, participants were grouped into high (HR, n=57) and low (LR, n=40) ACL injury risk based on participating in a sport with high or low ACL injury rates. The HR group was composed of athletes participating in soccer, basketball, and volleyball, while the LR group athletes participated in diving, cross country, and track and field. Participants performed all standard functional tests (SFT) and side-to-side differences for each participant as well as between group differences were assessed for the hop tests. The LSI, a ratio frequently used to gauge athletes’ readiness for RTP post injury, was also assessed for between group differences. The TJA was compared between the groups on individual flaws, overall scores, and number of jumps performed. Results No between group differences for hop distances were found, with medium to large effect sizes for SLH, TH, and COH. The HR group had a higher TJA score, number of jumps, and higher proportion of the flaw of ‘foot placement not shoulder width apart’. Conclusion Although most SFT's showed no significant differences between athlete groups, some differences were seen in the TJA; the HR group showed an increase in ‘foot placement not shoulder width apart’ flaw, higher overall flaw scores, and overall jumped more times compared to the LR group. These results may warrant caution in relying solely on SFT for RTP decisions, due to potential asymmetries seen in an uninjured population with baseline testing. Level of Evidence 4 PMID:27904796
Jet Engine Operating and Support Cost Estimating Relationship Development.
1985-09-01
0 H COX UCSSFE SEP 85 RFIT/GSM/LSY/85S-S F/G 14/1 M liiiI~ 1.8 2. I...~ 0 1.8 11111 ~ *& 11110 .8 MICR~OCOPY RESOLUTION TEST CHART N AT-N AL BUEA O... testing equipment, and more highly skilled laborers to maintain the engines. Variables indicative of technology and performance are specific fuel...Qualification Test (MlOT) date. October 1942 was slected because it was the date when the first US turbojet- 50 powered aircraft -Flew (26s14. Another time
Microcircuit Device Reliability Memory/Digital LSI
1982-01-01
has been performed. Each failure event record reveals the particular device and test characteristics, as well as associated stress values and other...given by: « s logio (Vxp) where X0 is the observed failure rate Xp is the predicted failure rate « is the residual Values of « are then plotted...n...... ||^||tpMMMWiWMM*i»""l’’ iŕŕ" ’• of failures per point). Some "funnelling" in Figure 17 shows this, although there is a fair amount of
Feasibility of developing LSI microcircuit reliability prediction models
NASA Technical Reports Server (NTRS)
Ryerson, C. M.
1972-01-01
In the proposed modeling approach, when any of the essential key factors are not known initially, they can be approximated in various ways with a known impact on the accuracy of the final predictions. For example, on any program where reliability predictions are started at interim states of project completion, a-priori approximate estimates of the key factors are established for making preliminary predictions. Later these are refined for greater accuracy as subsequent program information of a more definitive nature becomes available. Specific steps to develop, validate and verify these new models are described.
2012-09-01
regulated by miR-99a/let7c/125b-2 cluster. Using bioinformatic prediction algorithm TargetScan, we identified 7 genes that are commonly targeted by miR-99a...HPeak, a Hidden Markov Model (HMM)-based peak identifying algorithm (http://www.sph.umich.edu/csg/qin/HPeak/). Seven AR binding sites were reported by...and ARBS2 by ALGGEN- PROMO, a matrix algorithm for predicting transcription factor binding sites based on TRANSFAC (http://alggen.lsi.upc.es/cgi- bin
1984-09-01
OF’ COMMISSIONED SERVICE AND THE PERCEIVED IMPORTANCE OF THE MILITARY COMPENSATION PACKAGE TO AIR FORCE OFFICERS THESIS Daniel A. Ovelbar Captain, USAF... THESIS Daniel A. Cvelbar Captain, USAF AFI T/GSM/LSY/84S-8 DTICSLECTE3 Approved for public release; distribution unlimited The contents of the document...OF THE MILITARY COMPENSATION PACKAGE TO AIR FORCE OFFICERS THESIS Presented to the Faculty of the School of Systems and Logistics of the Air Force
Effect of 5-S-GAD on UV-B-induced cataracts in rats.
Kawada, Hiroyoshi; Kojima, Masami; Kimura, Takahito; Natori, Shunji; Sasaki, Kazuyuki; Sasaki, Hiroshi
2009-09-01
5-S-Glutathionyl-N-beta-alanyl-3,4-dihydroxyphenylalanine (5-S-GAD) is a novel antibacterial substance purified from Sarcophaga peregrina (flesh fly) that has both a radical scavenging activity and antioxidative activity. This is a report of an investigation of the effect of 5-S-GAD (eyedrops) on UVB-induced cataracts in rats. Brown Norway male rats (n = 32; 7 weeks old) were treated with either 5-S-GAD 0.1%, 5-SGAD 1%, astaxanthin (AST) 0.1% suspension eyedrops or the vehicle alone (the solution without 5-S-GAD) three times a day (three doses at 5-min intervals each time). The treatment was scheduled 2 days before UV-B exposure and 2 days after UV-B exposure. Exposure to 100-200 mJ/cm(2) UV-B was performed once a week between drug treatments for 9 consecutive weeks, with a total dose of 1200 mJ/cm(2) UV-B. Ocular penetration of 5-S-GAD was analyzed using high-pressure liquid chromatography (HPLC). Cataract formation was documented by an anterior eye segment analysis system once a week under mydriasis. The light-scattering intensity (LSI) of the anterior superficial cortex region was measured. In the eighth to ninth week after the start of UV-B exposure, the LSI of anterior subcapsular lenses of 5-S-GAD-treated groups, as detected by HPLC, was significantly lower (P < 0.05) than that of the control, whereas no such difference was found in the AST-treated group. 5-S-GAD eyedrop application may delay the progression of UV-B-induced cataract in rats.
Jones, Kenneth B; Afram, Joseph D; Benotti, Peter N; Capella, Rafael F; Cooper, C Gary; Flanagan, Latham; Hendrick, Steven; Howell, L Michael; Jaroch, Mark T; Kole, Kerry; Lirio, Oscar C; Sapala, James A; Schuhknecht, Michael P; Shapiro, Robert P; Sweet, William A; Wood, Michael H
2006-06-01
Laparoscopic bariatric surgery has experienced a rapid expansion of interest over the past 5 years, with a 470% increase. This rapid expansion has markedly increased overall cost, reducing surgical access. Many surgeons believe that the traditional open approach is a cheaper, safer, equally effective alternative. 16 highly experienced "open" bariatric surgeons with a combined total of 25,759 cases representing >200 surgeon years of experience, pooled their open Roux-en-Y gastric bypass (ORYGBP) data, and compared their results to the leading laparoscopic (LRYGBP) papers in the literature. In the overall series, the incisional hernia rate was 6.4% using the standard midline incision. Utilizing the left subcostal incision (LSI), it was only 0.3%. Return to surgery in <30 days was 0.7%, deaths 0.25%, and leaks 0.4%. Average length of stay was 3.4 days, and return to usual activity 21 days. Small bowel obstruction was significantly higher with the LRYGBP. Surgical equipment costs averaged approximately $3,000 less for "open" cases. LRYGBP had an added expense for longer operative time. This more than made up for the shorter length of stay with the laparoscopic approach. The higher cost, higher leak rate, higher rate of small bowel obstruction, and similar long-term weight loss results make the "open" RYGBP our preferred operation. If the incision is taken out of the equation (i.e. use of the LSI), the significant advantages of the open technique become even more obvious.
NASA Astrophysics Data System (ADS)
Ponticorvo, Adrien; Rowland, Rebecca A.; Baldado, Melissa L.; Kennedy, Gordon T.; Saager, Rolf B.; Choi, Bernard; Durkin, Anthony J.
2016-04-01
The ability to accurately assess burn wound severity in a timely manner is a critical component of wound management as it dictates the course of treatment. While full thickness and superficial burns can be easily diagnosed through visual inspection, burns that fall in between these categories are difficult to classify. Additionally, the ability to better quantify different stages of wound healing from a burn of any severity would be important for evaluating the efficacy of different treatment options. Here we present a longitudinal (28 day) study that employs spatial frequency domain imaging (SFDI) and laser speckle imaging (LSI) as non-invasive technologies to characterize in-vivo burn wounds and healing in a murine model. Burn wounds were created using an established technique of a brass comb heated to a given temperature and applied for a set amount of time. They were imaged immediately after the initial injury and then at 2, 4, 7, 14, 21, and 28 days following the injury. Biopsies were taken on the day of the injury in order to verify the extent of the burn damage as well as at different time points after the injury in order to visualize different stages of inflammation and healing. The results of this study suggest that the reduced scattering coefficient measured using SFDI and blood flow as measured using LSI have the potential to provide useful metrics for quantifying the severity of burn injuries as well as track the different stages associated with wound healing progression.
B-H Bond Activation by an Amidinate-Stabilized Amidosilylene: Non-Innocent Amidinate Ligand.
Khoo, Sabrina; Shan, Yu-Liang; Yang, Ming-Chung; Li, Yongxin; Su, Ming-Der; So, Cheuk-Wai
2018-05-21
The activation of B-H and B-Cl bonds in boranes by base-stabilized low-valent silicon compounds is described. The reaction of the amidinato amidosilylene-borane adduct [L{Ar(Me 3 Si)N}SiBH 3 ] [1; L = PhC(N tBu) 2 , and Ar = 2,6- iPr 2 C 6 H 3 ] with MeOTf in toluene at room temperature formed [L{Ar(Me 3 Si)N}SiBH 2 OTf] (2). [LSiN(SiMe 3 )Ar] in compound 2 then underwent a B-H bond activation with BH 2 OTf in refluxing toluene to afford the B-H bond activation product [LB(H)Si(H)(OTf){N(SiMe 3 )Ar}] (3). On the other hand, when compound 2 was reacted with 4-dimethylaminopyridine in refluxing toluene, another B-H bond activation product [(μ-κ1:κ1-L)B(H)(DMAP)Si(H){N(Ar)SiMe 3 }]OTf (4) was afforded. Mechanistic studies show that "(μ-κ1:κ1-L)B(H)(OTf)Si(H){N(Ar)SiMe 3 }" (2A) is the key intermediate in the reactions mentioned above. The formation of 2A is further evidenced by the activation of the B-Cl bond in PhBCl 2 by the amidinato silicon(I) dimer [LSi:] 2 to form the B-Cl bond activation product [(μ-κ1:κ1-L)B(Cl)(Ph)Si(Cl)] 2 (6). Compounds 2-4 and 6 were characterized by nuclear magnetic resonance spectroscopy and X-ray crystallography.
NASA Astrophysics Data System (ADS)
Hosono, Kunihiro; Kato, Kokoro
2008-10-01
This is a report on a panel discussion organized in Photomask Japan 2008, where the challenges about "Mask Complexities, Cost, and Cycle Time in 32-nm System LSI Generation" were addressed to have a look over the possible solutions from the standpoints of chipmaker, commercial mask shop, DA tool vendor and equipments makers. The wrap-up is as follows: Mask complexities justify the mask cost, while the acceptable increase rate of 32nm-mask cost significantly differs between mask suppliers or users side. The efficiency progress by new tools or DFM has driven their cycle-time reductions. Mask complexities and cost will be crucial issues prior to cycle time, and there seems to be linear correlation between them. Controlling complexity and cycle time requires developing a mix of advanced technologies, and especially for cost reduction, shot prices in writers and processing rates in inspection tools have been improved remarkably by tool makers. In addition, activities of consortium in Japan (Mask D2I) are expected to enhance the total optimization of mask design, writing and inspection. The cycle-time reduction potentially drives the lowering of mask cost, and, on the other, the pattern complexities and tighter mask specifications get in the way to 32nm generation as well as the nano-economics and market challenges. There are still many difficult problems in mask manufacturing now, and we are sure to go ahead to overcome a 32nm hurdle with the advances of technologies and collaborations by not only technologies but also finance.
Assessment of Tibetan grassland degeneration via landscape analysis
NASA Astrophysics Data System (ADS)
Sun, Jian; Hou, Ge; Ma, Baibing; Zang, Wenqian
2017-04-01
Desertification as one of the most severity social-economic-environmental issues has been extensive researched, and the assessments of desertification can be implemented accurately and efficiently based on the landscape indicators of vegetation coverage. Consequently, we explored the relationships of the degeneration index of the grassland with climate factors (temperature and precipitation), and human disturbance factors (livestock quantity and animal husbandry output value) via a landscape assessment approach across Tibet. The results showed that the vegetation coverage presented an increase tendency in the central region of Tibet, but the adverse phenomenon was observed in the northwest region. Meanwhile, the correlation of vegetation coverage with precipitation presented as positive effect in most region of Tibet except some regions of the alpine steppe, and the positive correlation of vegetation coverage with temperature also was observed in the less northwest region of Tibet. In addition, we found that the livestock quantity play a key roles in regulating vegetation coverage of the central region. Furthermore, the landscape indexes [number of patches (NP), patch density (PD), contagion index (CONTAG), landscape shape index (LSI), aggregation index (AI)] of grasslands were analyzed, the results exposed that vegetation coverage (1%-20%) has the positive influences on CONTAG and AI, but negative affects LSI, PD and NP. Morreover, there are opposite correlations among vegetation coverage and landscape indexes when vegetation coverage is 21%-40%. We concluded that overgrazing is the main reason of grassland degradation in Tibet, especially the number of livestock aggravates the landscape fragmentation. The results highlighted the alpine grassland management in future.
NASA Astrophysics Data System (ADS)
Gomes, Allan Silva; Licht, Otavio Augusto Boni; Vasconcellos, Eleonora Maria Gouvêa; Soares, Jan Savaris
2018-04-01
Analysis of borehole samples offers the potential to investigate the chemostratigraphic variations of a large igneous province in subsurface. New geochemical data based on multielement analyses of 829 chip samples that were obtained during the drilling of seven deep boreholes is presented for the central area of the Paraná Igneous Province (PIP). In order to detail the compositional variations found within the two main types from the Central-Northern Subprovince (CNSP), simple statistical treatment was carried out for part this database. Thus, the combination of low (L) and high (H) contents of Th, Nb, La and Yb was used as a means to create 16 geochemical subtypes for the Type 4 (LSi-LZr-HTi-HP) sequence. Likewise, other four elements (Cr, Ni, Cu and Pd) were selected with the same intention for the Type 1 (Central-Northern) (LSi-LZr-LTi-LP) sequence. When subtypes are plotted in the cross section, it is possible to observe that those with similar characteristics tend to be associated in groups (cycles). This analysis showed that the volcanic pile can be divided into at least eleven different cycles and also that they are laterally continuous throughout the section. The compositional changes observed in these volcanic cycles also display correlations with Mg#, Zr, Ti/Y and La/SmN ratios, for example. Therefore, since the reservoir is marked by periods of injection of more differentiated or more mafic magmas, it could be suggested that it was periodically recharged with batches of magma from the parental source.
Milleman, Jeffery L; Milleman, Kimberly R; Kleber, Carl J; Proskin, Howard M; Dodds, Michael; Kelley, Michael; Ramirez, Lilian
2014-01-01
The purpose of this clinical investigation was to evaluate the effectiveness of a marketed whitening chewing gum compared to a no-gum control in preventing the formation of extrinsic stains on the teeth of stain-forming subjects when chewed over a 12-week period of regular unsupervised use in conjunction with daily tooth brushing. This was a single-center, examiner-blind, randomized, 12-week crossover clinical trial. Stain-forming (after smoking or drinking coffee or tea) adults, starting with a stain-free baseline, either chewed the test gum (Orbit White) unsupervised four times per day, 15 minutes/chew, or used no gum along with daily brushing with a commercially available toothbrush and dentifrice for 12 weeks. At the crossover, all procedures were repeated with subjects assigned the opposite treatment. Extrinsic stain was measured at six and 12 weeks by both the Lobene Stain Index (LSI) and the Modified Lobene Stain Index (MLSI) using separate experienced examiners. After 12 weeks, LSI stain scores showed a significant 25% reduction (p = 0.0008) in new stain formation for subjects using the test chewing gum along with tooth brushing versus tooth brushing alone (no-gum control). The corresponding MLSI stain scores demonstrated a 36% reduction (p < 0.0001) in the formation of extrinsic stain on the teeth. The overall findings of this clinical study demonstrated that regular use of Orbit White chewing gum, soon after smoking or drinking coffee or tea, will supplement daily tooth brushing in preventing unsightly stains from forming on the anterior teeth compared to brushing alone.
NASA Astrophysics Data System (ADS)
Zhang, Yan-yu; Wang, Jing; Shi, Yan-xi; Li, Yu-huan; Lv, Chun-yan
2005-10-01
The Crisscross Region of Wind-drift Sand Regions along the Great Wall and Loess Plateau locates in southern Ordos Plateau and northern Chinese Loess Plateau, where wind erosion and water erosion coexist and specified environmental and socio-economic factors, especially human activities induce serious land degradation. However, there are only a few studies provide an overall assessment consequences. Integrated land quality assessment considering impacts of soil, topography, vegetation, environmental hazards, social-economic factors and land managements are imperative to the regional sustainable land managements. A pilot study was made in Hengshan County (Shanxi Province) with the objective of developing comprehensive land quality evaluation model integrating data from farmers' survey and Remote Sensing. Surveys were carried out in 107 households of study area in 2003 and 2004 to get farmers' perceptions of land quality and to collect correlative information. It was found out that farmers evaluated land quality by slope, water availability, soil texture, yields, amount of fertilizer, crop performance, sandy erosion degree and water erosion degree. Scientists' indicators which emphasize on getting information by RS technology were introduced to reflecting above indicators information for the sake of developing a rapid, efficient and local-fitted land quality assessment model including social-economic, environmental and anthropogenic factors. Data from satellite and surveys were integrated with socio-economic statistic data using geographical information system (GIS) and three indexes, namely Production Press Index (PPI), Land State Index (LSI) and Farmer Behavior Index (FBI) were proposed to measure different aspects of land quality. A model was further derived from the three indexes to explore the overall land quality of the study area. Results suggest that local land prevalently had a poor quality. This paper shows that whilst the model was competent for its work in the study area and evaluation results would supply beneficial information for management decisions.
GenExp: an interactive web-based genomic DAS client with client-side data rendering.
Gel Moreno, Bernat; Messeguer Peypoch, Xavier
2011-01-01
The Distributed Annotation System (DAS) offers a standard protocol for sharing and integrating annotations on biological sequences. There are more than 1000 DAS sources available and the number is steadily increasing. Clients are an essential part of the DAS system and integrate data from several independent sources in order to create a useful representation to the user. While web-based DAS clients exist, most of them do not have direct interaction capabilities such as dragging and zooming with the mouse. Here we present GenExp, a web based and fully interactive visual DAS client. GenExp is a genome oriented DAS client capable of creating informative representations of genomic data zooming out from base level to complete chromosomes. It proposes a novel approach to genomic data rendering and uses the latest HTML5 web technologies to create the data representation inside the client browser. Thanks to client-side rendering most position changes do not need a network request to the server and so responses to zooming and panning are almost immediate. In GenExp it is possible to explore the genome intuitively moving it with the mouse just like geographical map applications. Additionally, in GenExp it is possible to have more than one data viewer at the same time and to save the current state of the application to revisit it later on. GenExp is a new interactive web-based client for DAS and addresses some of the short-comings of the existing clients. It uses client-side data rendering techniques resulting in easier genome browsing and exploration. GenExp is open source under the GPL license and it is freely available at http://gralggen.lsi.upc.edu/recerca/genexp.
GenExp: An Interactive Web-Based Genomic DAS Client with Client-Side Data Rendering
Gel Moreno, Bernat; Messeguer Peypoch, Xavier
2011-01-01
Background The Distributed Annotation System (DAS) offers a standard protocol for sharing and integrating annotations on biological sequences. There are more than 1000 DAS sources available and the number is steadily increasing. Clients are an essential part of the DAS system and integrate data from several independent sources in order to create a useful representation to the user. While web-based DAS clients exist, most of them do not have direct interaction capabilities such as dragging and zooming with the mouse. Results Here we present GenExp, a web based and fully interactive visual DAS client. GenExp is a genome oriented DAS client capable of creating informative representations of genomic data zooming out from base level to complete chromosomes. It proposes a novel approach to genomic data rendering and uses the latest HTML5 web technologies to create the data representation inside the client browser. Thanks to client-side rendering most position changes do not need a network request to the server and so responses to zooming and panning are almost immediate. In GenExp it is possible to explore the genome intuitively moving it with the mouse just like geographical map applications. Additionally, in GenExp it is possible to have more than one data viewer at the same time and to save the current state of the application to revisit it later on. Conclusions GenExp is a new interactive web-based client for DAS and addresses some of the short-comings of the existing clients. It uses client-side data rendering techniques resulting in easier genome browsing and exploration. GenExp is open source under the GPL license and it is freely available at http://gralggen.lsi.upc.edu/recerca/genexp. PMID:21750706
1987-09-01
AN A NALYSIS OF THE COST ACCOUNTING SYSTEM FOR THE DEPOT 1/1 MRINTENANCE SERVI..(U) MIR FORCE INST OF TECH IIGHT-PTTERSON RFB OH SCHOOL OF SYST.. 0 L...I "VV h S~ ~~i FiLE COV, THSI CIO ~OF AN ANALYSIS OF THE COST ACCOUNTING SYSTEM FOR THE DEPOT MAINTENANCE SERVICE, AIR FORCE INDUSTRIAL FUND...Patterson Air Force Base, Ohio ~ p~UOW~~ ’ I ~ 1 12 02 0 AFIT/GLM/LSY/87S-83 AN ANALYSIS OF THE COST ACCOUNTING SYSTEM FOR THE DEPOT MAINTENANCE SERVICE, AIR
On the variability of LSI+61 deg 303 (identical with GT 0236)
NASA Technical Reports Server (NTRS)
Tanzi, E. G.; Bignami, G. F.; Caraveo, P. A.; Maraschi, L.; Sormani, F.; Treves, A.
1982-01-01
Out of six long and six short wavelength observations, one spectrum exhibits a significant photometric variation: or approximately 20%. Interpreting the continuum as due to superposition of an early B main sequence star plus a gaseous component contributing at lambda 2000 A, the wavelength dependence of the variation suggests that it derives from the latter component. The data indicate that if the observed variation is phase dependent, a minimum should occur between phases 0.8 and 0.2. However, since the variation is observed in only one spectrum, it may well be erratic.
Cardiopulmonary data acquisition system. Version 2.0, volume 1: User's guide
NASA Technical Reports Server (NTRS)
1979-01-01
The Cardiopulmonary Data Acquisition System is a computerized method of both collecting and analyzing physiological data on subjects during a treadmill or ergometer stress test in the clinic. The real time acquisition of the physiological data, such as, heart rate, blood pressure, work load, and respiratory gases is accomplished by an LSI-11 microcomputer which displays this data on a hard copy terminal. The data are also concurrently stored on a mass storage device and anytime after the test period a selectable number of copies of the plots or minute reports can be reproduced at the terminal.
Design automation for complex CMOS/SOS LSI hybrid substrates
NASA Technical Reports Server (NTRS)
Ramondetta, P. W.; Smiley, J. W.
1976-01-01
A design automated approach used to develop thick-film hybrid packages is described. The hybrid packages produced combine thick-film and silicon on sapphire (SOS) laser surface interaction technologies to bring the on-chip performance level of SOS to the subsystem level. Packing densities are improved by a factor of eight over ceramic dual in-line packing; interchip wiring capacitance is low. Due to significant time savings, the design automated approach presented can be expected to yield a 3:1 reduction in cost over the use of manual methods for the initial design of a hybrid.
Graves, Stephanie D; Kidd, Karen A; Houlahan, Jeff E; Munkittrick, Kelly R
2017-04-01
Kejimkujik National Park and National Historic Site, Nova Scotia, Canada, is considered a biological mercury (Hg) hotspot because the tissues of yellow perch (Perca flavescens) and common loons (Gavia immer) inhabiting the lakes frequently exceed so-called safe levels of Hg. In the present study, the relationships between Hg and overall health of males and females of 3 forage fish species (brown bullhead Ameirus nebulosus, banded killifish Fundulus diaphanus, and golden shiner Notemigonus crysoleucas; n = 6-18/sex/lake) in 6 lakes at the park were assessed using condition factor, liversomatic index (LSI), and macrophage aggregates (MAs; indicators of tissue damage). Mean muscle total Hg (THg) concentrations of brown bullhead, banded killifish, and golden shiner across lakes were 0.32 μg/g, 0.27 μg/g, and 0.34 μg/g, respectively. Condition was negatively related to muscle THg in golden shiner and banded killifish, LSI was not related to THg in any species, and all species showed evidence of increasing MA prevalence (counts and area) with increasing THg concentrations. The MAs were most prevalent in spleen tissues of golden shiner, with mean percentage cover ranging from 0.36% to 5.59% across lakes. In addition, the area of MAs appeared to be better predicted by THg concentration than was the number of MAs in the same tissue. These findings suggest that Hg is affecting the health of wild fishes in Kejimkujik National Park and National Historic Site and that other populations with similar or higher concentrations of this metal may also be at risk. Environ Toxicol Chem 2017;36:976-987. © 2016 SETAC. © 2016 SETAC.
NASA Astrophysics Data System (ADS)
Tu, Jay F.; Rajule, Nilesh; Molian, Pal; Liu, Yi
2016-12-01
A copper-single-walled carbon nanotube (Cu-SWCNT) metal nanocomposite could be an ideal material if it can substantially improve the strength of copper while preserving the metal’s excellent thermal and electrical properties. However, synthesis of such a nanocomposite is highly challenging, because copper and SWCNTs do not form intermetallic compounds and are insoluble; as a result, there are serious issues regarding wettability and fine dispersion of SWCNTs within the copper matrix. In this paper we present a novel wet process, called the laser surface implantation process (LSI), to synthesize Cu-SWCNT nanocomposites by mixing SWCNTs into molten copper. The LSI process includes drilling several microholes on a copper substrate, filling the microholes with SWCNTs suspended in solution, and melting the copper substrate to create a micro-well of molten copper. The molten copper advances radially outward to engulf the microholes with pre-deposited SWCNTs to form the Cu-SWCNT implant upon solidification. Rapid and non-equilibrium solidification is achieved due to copper’s excellent heat conductivity, so that SWCNTs are locked in position within the copper matrix without agglomerating into large clusters. This wet process is very different from the typical dry processes used in powder metallurgy. Very high hardness improvement, up to 527% over pure copper, was achieved, confirmed by micro-indentation tests, with only a 0.23% SWCNT volume fraction. The nanostructure of the nanocomposite was characterized by TEM imaging, energy-dispersive x-ray spectroscopy mapping and spectroscopy measurements. The SWCNTs were found to be finely dispersed within the copper matrix with cluster sizes in the range of nanometers, achieving the goal of molecular-level mixing.
Lin, Tingting; Zhang, Dong; Liu, Xin; Xiao, Dongxue
2016-03-01
Enteritis has been increasingly recognized as one of the major obstacles for the lined seahorse Hippocampus erectus mass culture success. In the present study, the intestinal bacteria strains of the lined seahorses H. erectus suffered from enteritis were isolated, then their pathogenicities were confirmed by artificial infection, and one pathogenic bacteria strain named DS3 was obtained. The median lethal dose (LD50) of strain DS3 for 10 days was determined. The seahorses with different infection levels of uninfected (control), early stage of infection (ESI) and late stage of infection (LSI) were respectively sampled at 0, 3, 6 and 9 days post infection, and 12 immune parameters in the plasma were analyzed. The strain DS3 identified with a biochemical test combined with a molecular method was Vibrio parahaemolyticus, and its LD50 for 10 days was 1.3 × 10(3) cfu/fish. Six parameters including monocytes/leucocytes, leucocytes phagocytic rate, interleukin-2, interferon-α, lysozyme and immunoglobulin M exhibited a generally similar variation trend: highest in the control, second in the ESI and lowest in the LSI throughout the entire experiment. In view of the infection level of V. parahaemolyticus to H. erectus is largely decided by the seahorse's own immune capacity, therefore, these immune parameters were high in the non- or slightly infected seahorses, and low in the severely infected individuals may be an indicator for immune level. These immune parameters may be reliable indicators for the juvenile and broodstock quality assessment. Moreover, clarification of the enteritis pathogen also provides guidances for targeted medicine choice for the lined seahorse. Copyright © 2016 Elsevier Ltd. All rights reserved.
Radiation hardened microprocessor for small payloads
NASA Technical Reports Server (NTRS)
Shah, Ravi
1993-01-01
The RH-3000 program is developing a rad-hard space qualified 32-bit MIPS R-3000 RISC processor under the Naval Research Lab sponsorship. In addition, under IR&D Harris is developing RHC-3000 for embedded control applications where low cost and radiation tolerance are primary concerns. The development program leverages heavily from commercial development of the MIPS R-3000. The commercial R-3000 has a large installed user base and several foundry partners are currently producing a wide variety of R-3000 derivative products. One of the MIPS derivative products, the LR33000 from LSI Logic, was used as the basis for the design of the RH-3000 chipset. The RH-3000 chipset consists of three core chips and two support chips. The core chips include the CPU, which is the R-3000 integer unit and the FPA/MD chip pair, which performs the R-3010 floating point functions. The two support whips contain all the support functions required for fault tolerance support, real-time support, memory management, timers, and other functions. The Harris development effort had first passed silicon success in June, 1992 with the first rad-hard 32-bit RH-3000 CPU chip. The CPU device is 30 kgates, has a 508 mil by 503 mil die size and is fabricated at Harris Semiconductor on the rad-hard CMOS Silicon on Sapphire (SOS) process. The CPU device successfully passed tesing against 600,000 test vectors derived directly on the LSI/MIPS test suite and has been operational as a single board computer running C code for the past year. In addition, the RH-3000 program has developed the methodology for converting commercially developed designs utilizing logic synthesis techniques based on a combination of VHDK and schematic data bases.
NASA Astrophysics Data System (ADS)
Nagaoka, Yoshinori; Watanabe, Hidehiro
2007-10-01
As part of the technical program in Photomask Japan 2007, we held a panel discussion to discuss challenges and solutions for the double exposure and double patterning lithography technique for 32nm half-pitch design node. 4 panelists, Rik Jonckheere of IMEC, Belgium), Tsann-Binn Chiou of ASML Taiwan Ltd., Taiwan), Judy Huckabay of Cadence Design Systems Inc. (USA) and Yoshimitsu Okuda of Toppan Printing Co., Ltd., Japan) were invited to represent each key technical area. We also took a survey from the PMJ attendees prior to the panel discussion, to vote which key technical area they think the challenge exists for the 32nm half-pitch DE/DP lithography. The result of the survey was also presented during the panel discussion. One would intuitively think that by using a DE/DP technique you're relaxing the design rule by 2x, thus for 32nm node it's essentially the 65nm process- you're just repeating it 2 times. Well, not exactly, as identified by the panelists and the participants in the discussion. We recognized the difficulties in the LSI fabrication process steps, the lithography tool overlay, photomask CD and registration, and the issue of data splitting conflict. These difficulties are big challenge for both LSI and photomask manufactures; however, we have confirmed some solutions are already examined by the theoretical and experimental works of the people in research. Despite these difficulties, we are convinced that the immersion lithography with double exposure and double patterning techniques is one of the most promising candidates of the lithography for 32nm half pitch design node.
Trigger and Readout System for the Ashra-1 Detector
NASA Astrophysics Data System (ADS)
Aita, Y.; Aoki, T.; Asaoka, Y.; Morimoto, Y.; Motz, H. M.; Sasaki, M.; Abiko, C.; Kanokohata, C.; Ogawa, S.; Shibuya, H.; Takada, T.; Kimura, T.; Learned, J. G.; Matsuno, S.; Kuze, S.; Binder, P. M.; Goldman, J.; Sugiyama, N.; Watanabe, Y.
Highly sophisticated trigger and readout system has been developed for All-sky Survey High Resolution Air-shower (Ashra) detector. Ashra-1 detector has 42 degree diameter field of view. Detection of Cherenkov and fluorescence light from large background in the large field of view requires finely segmented and high speed trigger and readout system. The system is composed of optical fiber image transmission system, 64 × 64 channel trigger sensor and FPGA based trigger logic processor. The system typically processes the image within 10 to 30 ns and opens the shutter on the fine CMOS sensor. 64 × 64 coarse split image is transferred via 64 × 64 precisely aligned optical fiber bundle to a photon sensor. Current signals from the photon sensor are discriminated by custom made trigger amplifiers. FPGA based processor processes 64 × 64 hit pattern and correspondent partial area of the fine image is acquired. Commissioning earth skimming tau neutrino observational search was carried out with this trigger system. In addition to the geometrical advantage of the Ashra observational site, the excellent tau shower axis measurement based on the fine imaging and the night sky background rejection based on the fine and fast imaging allow zero background tau shower search. Adoption of the optical fiber bundle and trigger LSI realized 4k channel trigger system cheaply. Detectability of tau shower is also confirmed by simultaneously observed Cherenkov air shower. Reduction of the trigger threshold appears to enhance the effective area especially in PeV tau neutrino energy region. New two dimensional trigger LSI was introduced and the trigger threshold was lowered. New calibration system of the trigger system was recently developed and introduced to the Ashra detector
Simpkins, D.G.; Hubert, W.A.; Del Rio, C.M.; Rule, D.C.
2003-01-01
The physiological traits that allow fish to survive periods of limited food resources are poorly understood. We assessed changes in proximate body composition, relative organ mass, blood metabolites, and relative weight (Wr) of sedentary and actively swimming (15 cm/s) juvenile rainbow trout (154-182 mm total length) over 147 d of fasting. Fasting caused measurable responses that were augmented when fish were swimming. Lipids and plasma triacylglycerides declined over time. Proteins were catabolized simultaneously with lipid reserves, but ammonia concentrations in plasma did not increase. The liver somatic index (LSI) did not change substantially over 105 d, suggesting that gluconeogenesis maintained blood glucose concentrations and hepatic glycogen reserves for a substantial period of fasting. The gut somatic index (GSI) and Wr declined linearly during fasting, but the LSI did not decline until after 105 d of fasting. Consequently, the use of different body condition indices could lead to different conclusions about the condition of juvenile rainbow trout. Swimming activity caused fish to have lower lipid and protein reserves than those of sedentary fish. No mortalities were observed among sedentary fish, but mortalities occurred among actively swimming fish after 97 d of fasting when 3.2% or less lipid remained in their bodies. Body condition indices did not account for differences in proximate body composition between sedentary and actively swimming fish and were relatively poor predictors of lipid content and risk of mortality. The probability of mortality was most accurately predicted by percent lipid content. Therefore, we suggest that fisheries scientists consider using percent lipid content when evaluating the physiological status and risk of mortality due to starvation among juvenile rainbow trout.
Kumar Dubey, Arvind; Kumar, Navin; Ranjan, Ruma; Gautam, Ambedkar; Pande, Veena; Sanyal, Indraneel; Mallick, Shekhar
2018-02-01
The present study was intended to investigate the role of amino acid glycine in detoxification of As in Oryza sativa L. The growth parameters such as, shoot length and fresh weight were decreased during As(III) and As(V) toxicity. However, the application of glycine recovered the growth parameters against As stress. The application of glycine reduced the As accumulation in all the treatments, and it was more effective against As(III) treatment and reduced the accumulation by 68% in root and 71% in shoot. Similarly, the translocation of As from root to shoot, was higher against As(III) and As(V) treatments, whereas, reduced upon glycine application. The translocation of Fe and Na was also affected by As, which was lower under As(III) and As(V) treatments. However, the application of glycine significantly enhanced the translocation of Fe and Na in the shoot. Besides, the expression of lower silicon transporters i.e. Lsi-1 and Lsi-2 was observed to be significantly suppressed in the root with the application of glycine against As treatment. Similarly, the expression of three GRX and two GST gene isoforms were found to be significantly increased with glycine application. Simultaneously, the activities of antioxidant enzymes i.e. l-arginine dependent NOS, SOD, NTR and GRX were found to be significantly enhanced in the presence of glycine. Increased activities of antioxidant enzymes coincided with the decreased level of TBARS and H 2 O 2 in rice seedlings. Overall, the results suggested that the application of glycine reduces As accumulation through suppressing the gene expression of lower silicon transporters and ameliorates As toxicity by enhancing antioxidants defense mechanism in rice seedlings. Copyright © 2017 Elsevier Inc. All rights reserved.
Biomarker responses and PAH ratios in fish inhabiting an estuarine urban waterway.
Duarte, Rafael Mendonça; Sadauskas-Henrique, Helen; de Almeida-Val, Vera Maria Fonseca; Val, Adalberto Luis; Nice, Helen Elizabeth; Gagnon, Marthe Monique
2017-10-01
Many cities worldwide are established adjacent to estuaries and their catchments resulting in estuarine contamination due to intense anthropogenic activities. The aim of this study was to evaluate if fish living in an estuarine urban waterway were affected by contamination, via the measurement of a suite of biomarkers of fish health. Black bream (Acanthopagrus butcheri) were sampled in a small urban embayment and a suite of biomarkers of fish health measured. These were condition factor (CF), liver somatic index (LSI), gonadosomatic index (GSI), hepatic EROD activity, polycyclic aromatic hydrocarbon (PAH) biliary metabolites, serum sorbitol dehydrogenase (s-SDH) and branchial enzymes cytochrome C oxidase (CCO), and lactate dehydrogenase (LDH) activities. The biomarkers of exposure EROD activity, and pyrene- and B(a)P-type biliary metabolites confirmed current or recent exposure of the fish and that fish were metabolizing contaminants. Relative to a reference site, LSI was higher in fish collected in the urban inlet as was the metabolic enzyme LDH activity. CF, GSI, s-SDH, CCO, and naphthalene-type metabolites were at similar levels in the urban inlet relative to the reference site. PAH biliary metabolite ratios of high-molecular-weight to low-molecular-weight suggest that fish from the urban inlet were exposed to pyrogenic PAHs, likely from legacy contamination and road runoff entering the embayment. Similarly, the sediment PAH ratios and the freshness indices suggested legacy contamination of a pyrogenic source, likely originating from the adjacent historic gasworks site and a degree of contamination of petrogenic nature entering the inlet via storm water discharge. Biomarkers of exposure and effect confirmed that black bream collected in the Claisebrook Cove inlet, Western Australia, are currently exposed to contamination and are experiencing metabolic perturbations not observed in fish collected at a nearby reference site. © 2017 Wiley Periodicals, Inc.
Scarcia, Paola; Calamante, Gabriela; de la Torre, Fernando
2014-05-01
The Luján River basin, which is located in the northwest area of the province of Buenos Aires, Argentina, receives different anthropogenic inputs before reaching the Río de la Plata estuary. The aim of this study was to assess the adverse impact of the river in the middle part of the basin. To this end, an in situ cage assay was conducted in two sites of the river (S1 and S2) near Luján city, and the responses of hepatic biomarkers of both a standardized (Cyprinus carpio) and a native (Pimelodella laticeps) species were evaluated. The biomarkers studied were the condition factor and liver somatic indices (LSI), the enzymatic activities of catalase (CAT), superoxide dismutase (SOD), and glutathione-S-transferase (GST), lipid peroxidation levels (thiobarbituric acid reactive substances, TBARS) and the induction of hepatic cytochrome P450 1A (CYP1A) and vitellogenin (Vtg) proteins. After 14 days, LSI and GST activity increased, and TBARS levels decreased in both species exposed at S1 and S2. In addition, exposure at both sites promoted an increase in SOD activity and CYP1A induction in C. carpio, while Vtg expression was observed only at S1. A shorter exposure period (7 days) caused an initial response only at S2 mediated only by CAT in P. laticeps. Finally, our results demonstrate that a 14-day period of in situ exposure in Luján River could lead to antioxidant and biotransformation processes in C. carpio and to phase II biotransformation responses in P. laticeps. Copyright © 2012 Wiley Periodicals, Inc.
NASA Technical Reports Server (NTRS)
Boyd, R. W.; Hartman, W. F.
1992-01-01
The project's objective is to develop an advanced high speed coding technology that provides substantial coding gains with limited bandwidth expansion for several common modulation types. The resulting technique is applicable to several continuous and burst communication environments. Decoding provides a significant gain with hard decisions alone and can utilize soft decision information when available from the demodulator to increase the coding gain. The hard decision codec will be implemented using a single application specific integrated circuit (ASIC) chip. It will be capable of coding and decoding as well as some formatting and synchronization functions at data rates up to 300 megabits per second (Mb/s). Code rate is a function of the block length and can vary from 7/8 to 15/16. Length of coded bursts can be any multiple of 32 that is greater than or equal to 256 bits. Coding may be switched in or out on a burst by burst basis with no change in the throughput delay. Reliability information in the form of 3-bit (8-level) soft decisions, can be exploited using applique circuitry around the hard decision codec. This applique circuitry will be discrete logic in the present contract. However, ease of transition to LSI is one of the design guidelines. Discussed here is the selected coding technique. Its application to some communication systems is described. Performance with 4, 8, and 16-ary Phase Shift Keying (PSK) modulation is also presented.
Product assurance technology for procuring reliable, radiation-hard, custom LSI/VLSI electronics
NASA Technical Reports Server (NTRS)
Buehler, M. G.; Allen, R. A.; Blaes, B. R.; Hicks, K. A.; Jennings, G. A.; Lin, Y.-S.; Pina, C. A.; Sayah, H. R.; Zamani, N.
1989-01-01
Advanced measurement methods using microelectronic test chips are described. These chips are intended to be used in acquiring the data needed to qualify Application Specific Integrated Circuits (ASIC's) for space use. Efforts were focused on developing the technology for obtaining custom IC's from CMOS/bulk silicon foundries. A series of test chips were developed: a parametric test strip, a fault chip, a set of reliability chips, and the CRRES (Combined Release and Radiation Effects Satellite) chip, a test circuit for monitoring space radiation effects. The technical accomplishments of the effort include: (1) development of a fault chip that contains a set of test structures used to evaluate the density of various process-induced defects; (2) development of new test structures and testing techniques for measuring gate-oxide capacitance, gate-overlap capacitance, and propagation delay; (3) development of a set of reliability chips that are used to evaluate failure mechanisms in CMOS/bulk: interconnect and contact electromigration and time-dependent dielectric breakdown; (4) development of MOSFET parameter extraction procedures for evaluating subthreshold characteristics; (5) evaluation of test chips and test strips on the second CRRES wafer run; (6) two dedicated fabrication runs for the CRRES chip flight parts; and (7) publication of two papers: one on the split-cross bridge resistor and another on asymmetrical SRAM (static random access memory) cells for single-event upset analysis.
Overgeneral autobiographical memory effect in older depressed adults.
Ricarte, Jorge J; Latorre, José M; Ros, Laura; Navarro, Beatriz; Aguilar, María J; Serrano, Juan Pedro
2011-11-01
This research aims to investigate the characteristics of autobiographical retrieval in a group of older depressed adults compared with a control group of the same age. The sample was recruited from local primary care services. All participants were administered a demographic questionnaire and completed the Mini-Mental State Examination (MMSE; Lobo, A., Ezquerra, J., Gómez-Burgada, F., Sala, J.M., & Seva-Díaz, A. (1979). El Mini-Examen Cognoscitivo: Un test sencillo y práctico para detectar alteraciones intelectuales en pacientes médicos. Actas Luso-Españolas de Neurología, Psiquiatría y Ciencia, 3, 189-202), the Life Satisfaction Index (LSI; Stock, W., Okun, M., & Gómez, J. (1994). Subjective well-being measures: Reliability and validity among Spanish elders. International Journal of Aging and Human Development, 38, 221-235), and the Beck Hopelessness Scale (BHS; Beck, A.T., Weissman, A., Lester, D., & Trexler, L. (1974). The measurement of pessimism: The hopelessness scale. Journal of Consulting and Clinical Psychology, 42, 861-865). Finally, all participants completed the Autobiographical Memory Test (AMT; Williams, J.M.G., & Broadbent, K. (1986). Autobiographical memory in suicide attempters. Journal of Abnormal Psychology, 95, 144-149). Older adults with depression were less specific in their memories than the controls. Higher categoric retrieval for negative cue words compared with positive cue words was only found for older adults with depression. Specific retrieval in the group without depression was positively related to Life Satisfaction and negatively to hopelessness. The overgeneral effect appeared for older adults with depression due to the higher presence of extended memories (events lasting for more than 24 h) rather than categoric retrievals (summary of repeated events). The strong correlation between specific memories and Life Satisfaction among non-depressed older adults suggests its potential role as a protective factor for depression.
NASA Astrophysics Data System (ADS)
Fan, J.; He, H.; Hu, T.; Li, G.; Gao, H.; Zhao, X.
2017-09-01
China's cities have been undergoing rapid and intense urbanization processes in the past few decades. Shandong is a coastal province which is located in East China with big economy and population scales, and which also plays an important role in the rapid process of China's modernization. The DMSP/OLS dataset has been widely used for the urban development assessments in long time-series and large spatial scales situations. In this paper, we used a time series of nighttime light data to estimate the landscape spatial pattern changes of cities in Shandong province from 1994 to 2012. Nine landscape metrics were calculated and analyzed to figure out the spatial patterns of urban area developments of the cities in Shandong province. The landscape metrics include the number of patches (NP), the landscape total area (TA), the aggregation index (AI), the largest patch index (LPI), the mean patch area (AREA_MN), the landscape shape index (LSI), the total edge length (TE), the edge density (ED), and the mean radius of gyration (GYRATE_MN). The experimental results reveal that, in 1994-2012, the total urban area of cities in Shandong province expanded for 1.17 times, the average urban area increased by about 93.00%, the average annual growth rate of the TE metric is 2.67 %, while the ED metric decreased about 1.44 % annually. Bigger cities in this area show relative slower urbanization development processes, such as Jinan and Qingdao. Coastal cities represented much more rapid expansion velocities than inland cities. In the middle area of Shandong province, the connectivity between developed urban areas was constantly increased.
1993-08-01
Inc., 445 Pineda C. Melbourne, FL 32940 Contract No. F19628-91-C-0172 OBJECTIVE The framework for a system for automatic global seismic event...placedinsde hoiona tunlwihi meddi ooeeu lsi mees X5 o w ie f h unl( n 10 mee ai) ah aito atrEahptensda o n tesm sclbtwhaspre manfcto atr * 40 U * I 1 9w...34" - a o * a • * ao * U°o " - x3 20 ’x i, 4, * . St. at l mees n o w ie fttne 5 an10mtradi. ahrdaio pten O is calculated at a semi-circular receiver
Methods to Enhance Laser Speckle Imaging of High-Flow and Low-Flow Vasculature
Choi, Bernard; Ringold, Tyson L.; Kim, Jeehyun
2012-01-01
The objective of this paper is to present two methods to extend the response range of laser speckle imaging (LSI). We report on the use of two methods (image exposure time control and magnetomotive actuation of exogenous contrast agents) to enhance characterization of high- and low-flow vasculature, respectively. With an exposure time of 10 and 0.01 ms, the linear response range extended to 10 and 280 mm/s, respectively. With application of an AC magnetic field to a solution of stagnant SPIO particles, an apparent increase of ~3× in speckle flow index was induced. PMID:19964103
Space vehicle Viterbi decoder. [data converters, algorithms
NASA Technical Reports Server (NTRS)
1975-01-01
The design and fabrication of an extremely low-power, constraint-length 7, rate 1/3 Viterbi decoder brassboard capable of operating at information rates of up to 100 kb/s is presented. The brassboard is partitioned to facilitate a later transition to an LSI version requiring even less power. The effect of soft-decision thresholds, path memory lengths, and output selection algorithms on the bit error rate is evaluated. A branch synchronization algorithm is compared with a more conventional approach. The implementation of the decoder and its test set (including all-digital noise source) are described along with the results of various system tests and evaluations. Results and recommendations are presented.
A parallel algorithm for switch-level timing simulation on a hypercube multiprocessor
NASA Technical Reports Server (NTRS)
Rao, Hariprasad Nannapaneni
1989-01-01
The parallel approach to speeding up simulation is studied, specifically the simulation of digital LSI MOS circuitry on the Intel iPSC/2 hypercube. The simulation algorithm is based on RSIM, an event driven switch-level simulator that incorporates a linear transistor model for simulating digital MOS circuits. Parallel processing techniques based on the concepts of Virtual Time and rollback are utilized so that portions of the circuit may be simulated on separate processors, in parallel for as large an increase in speed as possible. A partitioning algorithm is also developed in order to subdivide the circuit for parallel processing.
Development of a microwave 20 x 20 switch matrix for 30/20 GHz SS-TDMA application
NASA Technical Reports Server (NTRS)
Cory, B. J.; Berkowitz, M.; Wallis, R.; Schiavone, A.; Shieh, D.; Campbell, J.
1982-01-01
The design and fabrication of a 3-8 GHz, 20 x 20 Satellite Switched-Time Division Multiple Access IF switch matrix applicable to a 30/20 GHz communications satellite are described. An assessment of switch architecture in 1980 concluded that the GaAs FET-based coupled crossbar switch matrix, incorporating high speed CMOS LSI logic for switch crosspoint addressing, would be the optimum technology available for communications satellite switching by 1982. This assessment was based on such factors as switching speed, bandwidth, off-state isolation, and reliability, over a 10-year mission life. A proof-of-concept model's construction and testing are presented.
NASA Technical Reports Server (NTRS)
Thomas, LeAnn; Doreswamy, Rajiv N.
2008-01-01
Systems Engineering and Integration (SE&I) is a critical discipline in developing new space systems. In 2005, NASA performed an internal study of 24 agency and Department of Defense (DoD) programs to evaluate methods of integrating SE&I practices and determine their effectiveness. The goal of the study was to determine the best SE&I implementation strategy for the Ares Projects Office. The study identified six SE&I organizational structures: 1. Lead systems integrator (LSI) with SE&I responsibility and government technical insight. 2a. Integration contractor with government SE&I responsibility (government insight). 2b. Integration contractor with government SE&I responsibility (government oversight). 3a. Prime contractor with SE&I responsibility (government insight). 3b. Prime contractor with SE&I responsibility (government oversight). 3c. Prime contractor with SE&I responsibility (government/industry partnership). 4a.Prime contractor with government SE&I responsibility (government insight). 4b. Prime contractor with government SE&I responsibility (government oversight). 4d.Prime contractors with total system performance responsibility (TSPR). 5. Prime contractor with government SE&I responsibility and integration products through a Federally Funded Research and Development Center (FFRDC). 6. Government/FFRDC in-house development with SE&I responsibility and function. The organizational structure used most often was number 4, using a prime contractor with government SE&I responsibility and government technical insight. However, data analyses did not establish a positive relationship between program development costs and specific SE&I organizational types, nor did it positively determine the relationship between successful programs or projects and their SE&I structure. The SE&I study reached the following conclusions: (1) Large, long-duration, technically complex programs or projects reach their technical goals, but rarely meet schedule or cost goals. NASA's recent successes have been smaller, short-duration development projects using heritage hardware/software, focused technology development, technical oversight and stable external factors. (2) Programs and projects have failed or been terminated due to lack of technical insight, relaxing of SE&I processes, and unstable external factors. (3) The study did not find a single, clear optimum SE&I organization type to fit all projects. However, while any organizational structure can be made to work, the fewer complexities in the program, the better the likelihood of success. (4) The most common successful SE&I organization structure type in the study was type 4b, where the government maintained integration responsibility, with the prime contractor providing SE&I products and the government providing technical oversight. This study was instrumental in helping the APO select organization structure 4, following the same SE&I and oversight process used during humanlund7s last voyages to the Moon.
Logerstedt, David; Grindem, Hege; Lynch, Andrew; Eitzen, Ingrid; Engebretsen, Lars; Risberg, May Arna; Axe, Michael J.; Snyder-Mackler, Lynn
2012-01-01
Background Single-legged hop tests are commonly used functional performance measures that can capture limb asymmetries in patients after anterior cruciate ligament (ACL) reconstruction. Hop tests hold potential as predictive factors of self-reported knee function in individuals after ACL reconstruction. Hypothesis Single-legged hop tests conducted preoperatively would not and 6 months after ACL reconstruction would predict self-reported knee function (International Knee Documentation Committee [IKDC] 2000) 1 year after ACL reconstruction. Study Design Cohort study (prognosis); Level of evidence, 2. Methods One hundred twenty patients who were treated with ACL reconstruction performed 4 single-legged hop tests preoperatively and 6 months after ACL reconstruction. Self-reported knee function within normal ranges was defined as IKDC 2000 scores greater than or equal to the age- and sex-specific normative 15th percentile score 1 year after surgery. Logistic regression analyses were performed to identify predictors of self-reported knee function within normal ranges. The area under the curve (AUC) from receiver operating characteristic curves was used as a measure of discriminative accuracy. Results Eighty-five patients completed single-legged hop tests 6 months after surgery and the 1-year follow-up with 68 patients classified as having self-reported knee function within normal ranges 1 year after reconstruction. The crossover hop and 6-m timed hop limb symmetry index (LSI) 6 months after ACL reconstruction were the strongest individual predictors of self-reported knee function (odds ratio, 1.09 and 1.10) and the only 2 tests in which the confidence intervals of the discriminatory accuracy (AUC) were above 0.5 (AUC = 0.68). Patients with knee function below normal ranges were over 5 times more likely of having a 6-m timed hop LSI lower than the 88% cutoff than those with knee function within normal ranges. Patients with knee function within normal ranges were 4 times more likely to have a crossover hop LSI greater than the 95% cutoff than those with knee function below normal ranges. No preoperative single-legged hop test predicted self-reported knee function within normal ranges 1 year after ACL reconstruction (all P > .353). Conclusion Single-legged hop tests conducted 6 months after ACL reconstruction can predict the likelihood of successful and unsuccessful outcome 1 year after ACL reconstruction. Patients demonstrating less than the 88% cutoff score on the 6-m timed hop test at 6 months may benefit from targeted training to improve limb symmetry in an attempt to normalize function. Patients with minimal side-to-side differences on the crossover hop test at 6 months possibly will have good knee function at 1 year if they continue with their current training regimen. Preoperative single-legged hop tests are not able to predict postoperative outcomes. PMID:22926749
An Integrated Scale for Measuring an Organizational Learning System
ERIC Educational Resources Information Center
Jyothibabu, C.; Farooq, Ayesha; Pradhan, Bibhuti Bhusan
2010-01-01
Purpose: The purpose of this paper is to develop an integrated measurement scale for an organizational learning system by capturing the learning enablers, learning results and performance outcome in an organization. Design/methodology/approach: A new measurement scale was developed by integrating and modifying two existing scales, identified…
SEM Analysis Techniques for LSI Microcircuits. Volume 1
1980-08-01
CHIP, EBIC 70 1-40 COLUMN DECODE FAILURE, VOLTAGE CONTRAST 71 1-41 COLUMN DECODE FAILURE, VOLTAGE CONTRAST 72 1-42 OUTPUT FAILURE, VOLTAGE CONTRAST 73...317 5-22 DATA OUTPUT BUFFER, LIGHT PHOTO 318 5-23 DATA OUTPUT BUFFER, VOLTAGE CONTRAST 319 5-24 OVERALL CHIP FUNCTION, LIGHT PHOTO 320 5-25 ROW...34.. 91 75 87 80 99 93’ 76 71 0.4mA 1 IFA "0" 85 76 88 80 99 94 76 72 0.4mA 15 ’FA Ŕ" 58 42 60 58 64 66 52 48 0.4mA 13 IFE (A) 1101" 54 51 56 60 65 58 47
NASA Astrophysics Data System (ADS)
Kasashima, Yuji; Tsutsumi, Kota; Mitomi, Shinzo; Uesugi, Fumihiko
2017-06-01
In mass-production plasma etching equipment, the corrosion of ceramic chamber parts reduces the production yield of LSI and overall equipment effectiveness (OEE) owing to contamination, short useful life, and particle generation. Novel ceramics that can improve the production yield and OEE are highly required. We develop magnesium oxide (MgO)-based ceramics and evaluate them under mass-production plasma etching conditions. The results of this study indicate that the developed MgO-based ceramics with high mechanical properties and low electric resistivity have a higher resistance to corrosion in plasma etching using CF4 gas than Si and conventional ceramic materials such as aluminum oxide and yttrium oxide.
High Resolution Thermography In Medicine
NASA Astrophysics Data System (ADS)
Clark, R. P.; Goff, M. R.; Culley, J. E.
1988-10-01
A high resolution medical thermal imaging system using an 8 element SPRI1E detector is described. Image processing is by an Intellect 100 processor and is controlled by a DEC LSI 11/23 minicomputer. Image storage is with a 170 Mbyte winchester disc together with archival storage on 12 inch diameter optical discs having a capacity of 1 Gbyte per side. The system is currently being evaluated for use in physiology and medicine. Applications outlined include the potential of thermographic screening to identify genetic carriers in X-linked hypohidrotic ectodermal dysplasia (XED), detailed vas-cular perfusion studies in health and disease and the relation-ship between cutaneous blood flow, neurological peripheral function and skin surface temperature.
NMR measurements on the triumf polarized deuterium target
NASA Astrophysics Data System (ADS)
Wait, G. D.; Delheij, P. P. J.; Healey, D. C.
1989-01-01
The NMR system and the polarization measurements of the TRIUMF polarized deuterium target are described. The NMR tuned circuit is kept resonant at all frequencies to allow for a high gain in the rf amplifiers and to permit the measurement of the real part of the NMR signal. A Starburst (J-11) and an LSI-11 are used to process the NMR signal at a high sample rate. A synthesizer under the control of an 8085 based microprocessor (TRIMAC) provides the rf sweep. Vector polarizations between -0.33 and -0.40 were routinely achieved during a four week run in the TRIUMF M11 pion beamline with a statistical uncertainty of 3.4% and a systematic uncertainty of 5%.
Learning style impact on knowledge gains in human patient simulation.
Shinnick, Mary Ann; Woo, Mary A
2015-01-01
Human patient simulation (HPS) is a widely used method of teaching in nursing education. While it is believed that a student's learning style impacts knowledge gains in HPS, there is little evidence to support this. This study sought to determine the impact of learning style on knowledge gains after a heart failure (HF) simulation experience in pre-licensure nursing students. A convenience sample of four cohorts of prelicensure nursing students (n=161) were recruited from three Baccalaureate Schools of Nursing at the same point in their curriculum (age 25.7±6.6 years; gender=85.5% female) and participated in HPS using a HF simulation on a high-fidelity manikin. Learning style was assessed by the Kolb Learning Style Inventory (LSI) and pre- and post-HPS knowledge measured by parallel, validated, knowledge tests. The LSI identifies 4 learning styles, (Assimilating Diverging, Accommodating, and Converging). In some cases, learners present a balanced learning profile-an emphasis of all four equally. Statistical analysis consisted of t-tests and ANOVA. HF knowledge scores post-HPS compared to pre-HPS scores revealed a mean improvement of 7 points (p<0.001) showing evidence of learning. Within group score increases between the pre-test and post-test were seen for the Assimilating (66.68±20.87 to 83.35±12.59; p=0.07), Diverging (61.95±11.08 to 69.86±12.33; p<0.01) and balanced profiles (64.4±12.45 to 71.8±10.14; p<0.01), but not for Converging or Accommodating profiles (73% of sample). Post-hoc paired t-tests revealed a large effect size for the Assimilators (0.91) and moderate effect sizes for both the Divergers and balanced profiles (0.67 and 0.65, respectively). These findings confirm that knowledge gains occur with HPS and provide evidence that HPS is an effective teaching methodology for nursing students identifying with most types of learning styles. Copyright © 2014 Elsevier Ltd. All rights reserved.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Egloff, Caroline; Crump, Doug, E-mail: doug.crump@ec.gc.ca; Porter, Emily
The organophosphate flame retardants tris(2-butoxyethyl) phosphate (TBOEP) and triethyl phosphate (TEP) are used in a wide range of applications to suppress or delay the ignition and spread of fire. Both compounds have been detected in the environment and TBOEP was recently measured in free-living avian species. In this study, TBOEP and TEP were injected into the air cell of chicken embryos at concentrations ranging from 0 to 45,400 ng/g and 0 to 241,500 ng/g egg, respectively. Pipping success, development, hepatic mRNA expression of 9 target genes, thyroid hormone levels, and circulating bile acid concentrations were determined. Exposure to the highestmore » doses of TBOEP and TEP resulted in negligible detection of the parent compounds in embryonic contents at pipping indicating their complete metabolic degradation. TBOEP exposure had limited effects on chicken embryos, with the exception of hepatic CYP3A37 mRNA induction. TEP exposure decreased pipping success to 68%, altered growth, increased liver somatic index (LSI) and plasma bile acids, and modulated genes associated with xenobiotic and lipid metabolism and the thyroid hormone pathway. Plasma thyroxine levels were decreased at all TEP doses, including an environmentally-relevant concentration (8 ng/g), and gallbladder hypotrophy was evident at ≥ 43,200 ng/g. Tarsus length and circulating thyroxine concentration emerged as potential phenotypic anchors for the modulation of transthyretin mRNA. The increase in plasma bile acids and LSI, gallbladder hypotrophy, and discoloration of liver tissue represented potential phenotypic outcomes associated with modulation of hepatic genes involved with xenobiotic and lipid metabolism. - Highlights: • TBOEP is not embryolethal to chicken embryos. • TEP affected embryonic viability, morphometric endpoints, and thyroid hormone levels. • TEP altered mRNA levels of xenobiotic and lipid metabolism genes. • TEP increased plasma bile acids and caused gallbladder hypotrophy. • TEP elicited more adverse molecular and phenotypic effects than TBOEP.« less
Microscopic structural descriptor of liquid water
NASA Astrophysics Data System (ADS)
Shi, Rui; Tanaka, Hajime
2018-03-01
The microscopic structure of liquid water has been believed to be the key to the understanding of the unique properties of this extremely important substance. Many structural descriptors have been developed for revealing local structural order in water, but their properties are still not well understood. The essential difficulty comes from structural fluctuations due to thermal noise, which are intrinsic to the liquid state. The most popular and widely used descriptors are the local structure index (LSI) and d5. Recently, Russo and Tanaka [Nat. Commun. 3, 3556 (2014)] introduced a new descriptor ζ which measures the translational order between the first and second shells considering hydrogen bonding (H-bonding) in the first shell. In this work, we compare the performance of these three structural descriptors for a popular water model known as TIP5P water. We show that local structural ordering can be properly captured only by the structural descriptor ζ, but not by the other two descriptors particularly at a high temperature, where thermal noise effects are severe. The key difference of ζ from LSI and d5 is that only ζ considers H-bonding which is crucial to detect high translational and tetrahedral order of not only oxygen but also hydrogen atoms. The importance of H-bonding is very natural, considering the fact that the locally favored structures are stabilized by energy gain due to the formation of four hydrogen bonds between the central water molecule and its neighboring ones in the first shell. Our analysis of the water structure by using ζ strongly supports the two-state model of water: water is a dynamic mixture of locally favored (ordered) and normal-liquid (disordered) structures. This work demonstrates the importance of H-bonding in the characterization of water's structures and provides a useful structural descriptor for water-type tetrahedral liquids to study their structure and dynamics.
NASA Astrophysics Data System (ADS)
Thangasamy, N.; Varathan, R.
2013-05-01
Landslides are often destructive and periodically affect the Nilgiris district. Two method viz., Frequency ratio (FR) and Weights of evidence (WofE) were used to reclassify the sub-variables and the landslide susceptibility index (LSI) was calculated by weighted sum overlay analysis. The final LS Zonation map was prepared from the LSI and the area was classified into two zones. Validation of the LSM was the next step and was accomplished by excluding some landslide points in the GIS analyses and overlying the unused landslides points over the LSM. The LSMs prepared using the FR and WofE methods are reliable as more than 75% of the excluded slides fall in high and very high landslide susceptibility zones and the error of mismatch in the two maps is negligible.During the course of this study landslides devastated the Kethi, Coonoor, Barliyar and Kothagiri areas due to an extreme event with 374 to 1,171 mm rainfall received in these stations in just three days on 8th to 10th November, 2009. The rainfall event is unprecedented and such extreme rainfall has not occurred in the region since meteorological records are maintained. Over 100 landslides took place in the area of which 75 are major slides and more 43 people died and 200 houses were damaged. The event was documented and a data base containing the location, details of death, slide characteristics and photographs was prepared. Further, the probability of landslide occurrence may change over time due to changes in land use, unscientific massive developmental activities and establishing settlements without adopting proper safety measures. The study also highlights the need for maintenance of landslide database and installation of more rain gauge stations to update and improve the LSM so as to reduce the risk of landslide hazard faced by the Community. NaveenRaj.T INDIA LANDSLIDE SUSCEPTIBILITY MAPPING USING GEOSPATIAL TECHNOLOGY IN SOUTH EASTERN PART OF NILGIRI DISTRICT, TAMILNADU, INDIA.
Alvarez-García, Gema; García-Culebras, Alicia; Gutiérrez-Expósito, Daniel; Navarro-Lozano, Vanesa; Pastor-Fernández, Iván; Ortega-Mora, Luis Miguel
2013-11-15
Bovine neosporosis control programs are currently based on herd management and serodiagnosis because effective treatments and vaccines are unavailable. Although a wide variety of serological tools have been developed, enzyme-linked immunosorbent assays (ELISAs) are the most commonly commercialized tests. Partial comparative studies have been performed in the past, and the panel of available ELISAs has notably changed in the last few years. Therefore, diagnostic laboratories are requesting updated information about the performance of these tests. Accordingly, the aim of this study was to compare all of the commercially available ELISAs (n=10) by evaluating their performance and to re-standardize them based on TG-ROC analyses when necessary. For this purpose, a well-characterized serum panel from experimentally and naturally infected bovines and non-infected bovines (n=458) was used. Two different definitions of gold standard were considered: (i) the result of the majority of tests and (ii) pre-test information based on epidemiological, clinical and serological data. Most of the tests displayed high sensitivity (Se) and specificity (Sp) values when both gold standard criteria were considered. Furthermore, all the tests showed near perfect agreement, with the exception of the pair-wise comparisons that included the VMRD and SVANOVIR. The best-adjusted ELISAs were the HIPRA-CIVTEST, IDVET, BIOVET and IDEXX Rum (Se and Sp>95%). After the TG-ROC analyses, higher Se and Sp values were obtained for the BIO-X, LSI Bov, LSI Rum and IDEXX Bov, though the increases were more significant for the SVANOVIR and VMRD. The Kappa values also increased with the new adjusted cut-offs. This is the first study that offers updated performance evaluations of commercially available ELISAs. Such analyses are essential for diagnostic laboratories and are valuable to the companies that develop and distribute these tests. Copyright © 2013 Elsevier B.V. All rights reserved.
NASA Astrophysics Data System (ADS)
Cheng, Boyang; Jin, Longxu; Li, Guoning
2018-06-01
Visible light and infrared images fusion has been a significant subject in imaging science. As a new contribution to this field, a novel fusion framework of visible light and infrared images based on adaptive dual-channel unit-linking pulse coupled neural networks with singular value decomposition (ADS-PCNN) in non-subsampled shearlet transform (NSST) domain is present in this paper. First, the source images are decomposed into multi-direction and multi-scale sub-images by NSST. Furthermore, an improved novel sum modified-Laplacian (INSML) of low-pass sub-image and an improved average gradient (IAVG) of high-pass sub-images are input to stimulate the ADS-PCNN, respectively. To address the large spectral difference between infrared and visible light and the occurrence of black artifacts in fused images, a local structure information operator (LSI), which comes from local area singular value decomposition in each source image, is regarded as the adaptive linking strength that enhances fusion accuracy. Compared with PCNN models in other studies, the proposed method simplifies certain peripheral parameters, and the time matrix is utilized to decide the iteration number adaptively. A series of images from diverse scenes are used for fusion experiments and the fusion results are evaluated subjectively and objectively. The results of the subjective and objective evaluation show that our algorithm exhibits superior fusion performance and is more effective than the existing typical fusion techniques.
ClearFuels-Rentech Integrated Biorefinery Final Report
DOE Office of Scientific and Technical Information (OSTI.GOV)
Pearson, Joshua
The project Final Report describes the validation of the performance of the integration of two technologies that were proven individually on a pilot scale and were demonstrated as a pilot scale integrated biorefinery. The integrated technologies were a larger scale ClearFuels’ (CF) advanced flexible biomass to syngas thermochemical high efficiency hydrothermal reformer (HEHTR) technology with Rentech’s (RTK) existing synthetic gas to liquids (GTL) technology.
[Development of a scale to measure Korean ego-integrity in older adults].
Chang, Sung Ok; Kong, Eun Sook; Kim, Kwuy Bun; Kim, Nam Cho; Kim, Ju Hee; Kim, Chun Gill; Kim, Hee Kyung; Song, Mi Soon; Ahn, Soo Yeon; Lee, Kyung Ja; Lee, Young Whee; Chon, Si Ja; Cho, Nam Ok; Cho, Myung Ok; Choi, Kyung Sook
2007-04-01
Ego-integrity in older adults is the central concept related to quality of life in later life. Therefore, for effective interventions to enhance the quality of later life, a scale to measure ego-integrity in older adults is necessary. This study was carried out to develop a scale to measure ego-integrity in older adults. This study utilized cronbach's alpha in analyzing the reliability of the collected data and expert group, and factor analysis and item analysis to analyze validity. Seventeen items were selected from a total of 21 items. Cronbach's alpha coefficient for internal consistency was .88 for the 17 items of ego-integrity in the older adults scale. Three factors evolved by factor analysis, which explained 50.71% of the total variance. The scale for measuring ego-integrity in Korean older adults in this study was evaluated as a tool with a high degree of reliability and validity.
Chip-scale sensor system integration for portable health monitoring.
Jokerst, Nan M; Brooke, Martin A; Cho, Sang-Yeon; Shang, Allan B
2007-12-01
The revolution in integrated circuits over the past 50 yr has produced inexpensive computing and communications systems that are powerful and portable. The technologies for these integrated chip-scale sensing systems, which will be miniature, lightweight, and portable, are emerging with the integration of sensors with electronics, optical systems, micromachines, microfluidics, and the integration of chemical and biological materials (soft/wet material integration with traditional dry/hard semiconductor materials). Hence, we stand at a threshold for health monitoring technology that promises to provide wearable biochemical sensing systems that are comfortable, inauspicious, wireless, and battery-operated, yet that continuously monitor health status, and can transmit compressed data signals at regular intervals, or alarm conditions immediately. In this paper, we explore recent results in chip-scale sensor integration technology for health monitoring. The development of inexpensive chip-scale biochemical optical sensors, such as microresonators, that are customizable for high sensitivity coupled with rapid prototyping will be discussed. Ground-breaking work in the integration of chip-scale optical systems to support these optical sensors will be highlighted, and the development of inexpensive Si complementary metal-oxide semiconductor circuitry (which makes up the vast majority of computational systems today) for signal processing and wireless communication with local receivers that lie directly on the chip-scale sensor head itself will be examined.
High-frequency ultrasonic wire bonding systems
Tsujino; Yoshihara; Sano; Ihara
2000-03-01
The vibration characteristics of longitudinal-complex transverse vibration systems with multiple resonance frequencies of 350-980 kHz for ultrasonic wire bonding of IC, LSI or electronic devices were studied. The complex vibration systems can be applied for direct welding of semiconductor tips (face-down bonding, flip-chip bonding) and packaging of electronic devices. A longitudinal-complex transverse vibration bonding system consists of a complex transverse vibration rod, two driving longitudinal transducers 7.0 mm in diameter and a transverse vibration welding tip. The vibration distributions along ceramic and stainless-steel welding tips were measured at up to 980 kHz. A high-frequency vibration system with a height of 20.7 mm and a weight of less than 15 g was obtained.
Morse, Wayde C; Hall, Troy E; Kruger, Linda E
2009-03-01
In this article, we examine how issues of scale affect the integration of recreation management with the management of other natural resources on public lands. We present two theories used to address scale issues in ecology and explore how they can improve the two most widely applied recreation-planning frameworks. The theory of patch dynamics and hierarchy theory are applied to the recreation opportunity spectrum (ROS) and the limits of acceptable change (LAC) recreation-planning frameworks. These frameworks have been widely adopted internationally, and improving their ability to integrate with other aspects of natural resource management has significant social and conservation implications. We propose that incorporating ecologic criteria and scale concepts into these recreation-planning frameworks will improve the foundation for integrated land management by resolving issues of incongruent boundaries, mismatched scales, and multiple-scale analysis. Specifically, we argue that whereas the spatially explicit process of the ROS facilitates integrated decision making, its lack of ecologic criteria, broad extent, and large patch size decrease its usefulness for integration at finer scales. The LAC provides explicit considerations for weighing competing values, but measurement of recreation disturbances within an LAC analysis is often done at too fine a grain and at too narrow an extent for integration with other recreation and resource concerns. We suggest that planners should perform analysis at multiple scales when making management decisions that involve trade-offs among competing values. The United States Forest Service is used as an example to discuss how resource-management agencies can improve this integration.
ERIC Educational Resources Information Center
Kervan, Serdan; Tezci, Erdogan
2018-01-01
The aim of this study is to adapt ICT integration approach scale to Kosovo culture, which measures ICT integration approaches of university faculty to teaching and learning process. The scale developed in Turkish has been translated into Albanian to provide linguistic equivalence. The survey was given to a total of 303 instructors [161 (53.1%)…
Sharif, S.A.; Taydas, E.; Mazhar, A.; Rahimian, R.; Kelly, K.M.; Choi, B.; Durkin, A.J.
2012-01-01
Port wine stain (PWS) birthmarks are one class of benign congenital vascular malformation. Laser therapy is the most successful treatment modality of PWS. Unfortunately, this approach has limited efficacy, with only 10% of patients experiencing complete blanching of the PWS. To address this problem, several research groups have developed technologies and methods designed to study treatment outcome and improve treatment efficacy. This paper reviews seven optical imaging techniques currently in use or under development to assess treatment efficacy, focusing on: Reflectance spectrophotometers/tristimulus colorimeters, Laser Doppler flowmetry (LDF) and Laser Doppler imaging (LDI), Cross-polarized diffuse reflectance color imaging system (CDR), Reflectance Confocal Microscopy (RCM), Optical Coherence Tomography (OCT), Spatial Frequency Domain Imaging (SFDI), and Laser Speckle Imaging (LSI). PMID:22804872
Studying the High Energy Gamma Ray Sky with Gamma Ray Large Area Space Telescope (GLAST)
NASA Technical Reports Server (NTRS)
Kamae, T.; Ohsugi, T.; Thompson, D. J.; Watanabe, K.
1998-01-01
Building on the success of the Energetic Gamma Ray Experiment Telescope (EGRET) on the Compton Gamma Ray Observatory, the Gamma Ray Large Area Space Telescope (GLAST) will make a major step in the study of such subjects as blazars, gamma Ray bursts, the search for dark matter, supernova remnants, pulsars, diffuse radiation, and unidentified high energy sources. The instrument will be built on new and mature detector technologies such as silicon strip detectors, low-power low-noise LSI, and a multilevel data acquisition system. GLAST is in the research and development phase, and one full tower (of 25 total) is now being built in collaborating institutes. The prototype tower will be tested thoroughly at Stanford Linear Accelerator Center (SLAC) in the fall of 1999.
Design and implementation of reliability evaluation of SAS hard disk based on RAID card
NASA Astrophysics Data System (ADS)
Ren, Shaohua; Han, Sen
2015-10-01
Because of the huge advantage of RAID technology in storage, it has been widely used. However, the question associated with this technology is that the hard disk based on the RAID card can not be queried by Operating System. Therefore how to read the self-information and log data of hard disk has been a problem, while this data is necessary for reliability test of hard disk. In traditional way, this information can be read just suitable for SATA hard disk, but not for SAS hard disk. In this paper, we provide a method by using LSI RAID card's Application Program Interface, communicating with RAID card and analyzing the feedback data to solve the problem. Then we will get the necessary information to assess the SAS hard disk.
Garrison, J Craig; Bothwell, James M; Wolf, Gina; Aryal, Subhash; Thigpen, Charles A
2015-10-01
Restoration of symmetrical strength, balance, and power following anterior cruciate ligament reconstruction (ACL-R) are thought to be important factors for successful return to sports. Little information is available regarding early rehabilitation outcomes and achieving suggested limb indices of 90% on functional performance measures at the time of return to sports (RTS). To examine the relationship between symmetry of the anterior reach of the Y Balance Test™ at 12 weeks and functional performance measures at time of return to sports after anterior cruciate ligament (ACL) reconstruction. Retrospective Cohort. Forty subjects (mean ± SD age, 17.2 ± 3.8 years) who were in the process of rehabilitation following ACL reconstruction. Each subject volunteered and was enrolled in the study during physical therapy following ACL-R. Participants averaged two visits per week in physical therapy until the time of testing for RTS. The Y Balance Test™ was assessed at 12 weeks. Participants completed a battery of tests at RTS (6.4 ± 1.1 months) including triple hop distance (THD), single hop distance (SHD), isometric knee extension strength (KE), and the Vail Sport Test™. Side to side difference was calculated for the Y Balance Test™ anterior reach and limb symmetry indices (LSI) were computed for THD, SHD, and KE. Multiple regression models were used to study the relationship between variables at 12 weeks and RTS while controlling for age, gender, type of graft, and pain score. In addition, subjects were dichotomized based on a side-to-side Y Balance anterior reach difference into high risk (>4 cm) or low risk (≤4 cm) categories. A receiver operating characteristic (ROC) curve was used to identify individuals at 12 weeks who do not achieve 90% limb symmetry indices at time of RTS testing. . A statistically significant association was seen between Y Balance ANT at 12 weeks and SHD at RTS (β = -1.46, p = 0.0005, R(2) = 0.395), THD at RTS (β = -1.08, p = 0.0011, R(2) = 0.354) and KE at RTS (β = -1.00, p = 0.0025, R(2) = 0.279) after adjusting for age, gender, type of graft and pain score at week 12. There was no significant association between Y Balance ANT at 12 weeks and Vail Sport Test at RTS (p = 0.273). ROC curves indicated that the Y Balance ANT at 12 weeks identified participants who did not achieve 90% LSI for the SHD (AUC = 0.82 p = 0.02) and THD (AUC=0.85, p = 0.01) at RTS with a sensitivity of 0.96 (SHD) and 0.92 (THD) respectively. Participants following ACL-R who demonstrated > 4 cm Y Balance ANT deficits at 12 weeks on their involved limb did not tend to achieve 90% LSI for the SHD and THD at time of return to sports. The Y Balance ANT at 12 weeks and Vail Sport Test™ appear to measure different constructs following ACL-R. Level 3.
Su, Bi-ying; Liu, Shao-nan; Li, Xiao-yan
2011-11-01
To study the train of thoughts and procedures for developing the theoretical framework and the item pool of the peri-operative recovery scale for integrative medicine, thus making preparation for the development of this scale and psychometric testing. Under the guidance for Chinese medicine theories and the guidance for developing psychometric scale, the theoretical framework and the item pool of the scale were initially laid out by literature retrieval, and expert consultation, etc. The scale covered the domains of physical function, mental function, activity function, pain, and general assessment. Besides, social function is involved, which is suitable for pre-operative testing and long-term therapeutic efficacy testing after discharge from hospital. Each domain should cover correlated Zang-Fu organs, qi, blood, and the patient-reported outcomes. Totally 122 items were initially covered in the item pool according to theoretical framework of the scale. The peri-operative recovery scale of integrative medicine was the embodiment of the combination of Chinese medicine theories and patient-reported outcome concepts. The scale could reasonably assess the peri-operative recovery outcomes of patients treated by integrative medicine.
Integrated optic head for sensing a two-dimensional displacement of a grating scale
NASA Astrophysics Data System (ADS)
Ura, Shogo; Endoh, Toshiaki; Suhara, Toshiaki; Nishihara, Hiroshi
1996-11-01
An integrated optic sensor head was proposed for sensing a two-dimensional displacement of a scale consisting of crossed gratings. Two interferometers, crossing each other, are constructed by the integration of two pairs of linearly focusing grating couplers (LFGC's) and two pairs of photodiodes (PD's) on a Si substrate. Four beams radiated by the LFGC's from the sensor head overlap on the grating scale, and the beams are diffracted by the grating scale and interfere on the PD's. The period of the interference signal variation is just half of the scale grating period. The device was designed and fabricated with a grating scale of 3.2- mu m period, and the sensing principle was experimentally confirmed.
Fabrication of nano-scale Cu bond pads with seal design in 3D integration applications.
Chen, K N; Tsang, C K; Wu, W W; Lee, S H; Lu, J Q
2011-04-01
A method to fabricate nano-scale Cu bond pads for improving bonding quality in 3D integration applications is reported. The effect of Cu bonding quality on inter-level via structural reliability for 3D integration applications is investigated. We developed a Cu nano-scale-height bond pad structure and fabrication process for improved bonding quality by recessing oxides using a combination of SiO2 CMP process and dilute HF wet etching. In addition, in order to achieve improved wafer-level bonding, we introduced a seal design concept that prevents corrosion and provides extra mechanical support. Demonstrations of these concepts and processes provide the feasibility of reliable nano-scale 3D integration applications.
NASA Astrophysics Data System (ADS)
Kadlubowski, S.; Sawicki, P.; Sowinski, S.; Rokita, B.; Bures, K. D.; Rosiak, J. M.; Ulanski, P.
2018-01-01
Time-resolved pulse radiolysis, utilizing short pulses of high-energy electrons from accelerators, is an effective method for rapidly generating free radicals and other transient species in solution. Combined with fast time-resolved spectroscopic detection (typically in the ultraviolet/visible/near-infrared), it is invaluable for monitoring the reactivity of species subjected to radiolysis on timescales ranging from picoseconds to seconds. When used for polymer solutions, pulse radiolysis can be coupled with light-scattering detection, creating a powerful tool for kinetic and mechanistic analysis of processes like degradation or cross-linking of macromolecules. Changes in the light scattering intensity (LSI) of polymer solutions are indicative of alterations in the molecular weight and/or in the radius of gyration, i.e., the dimensions and shape of the macromolecules. In addition to other detection methods, LSI technique provides a convenient tool to study radiation-induced alterations in macromolecules as a function of time after the pulse. Pulse radiolysis systems employing this detection mode have been so far constructed to follow light scattered at a single angle (typically the right angle) to the incident light beam. Here we present an advanced pulse radiolysis & multi-angle light-scattering-intensity system (PR-MALLS) that has been built at IARC and is currently in the phase of optimization and testing. Idea of its design and operation is described and preliminary results for radiation-induced degradation of pullulan as well as polymerization and crosslinking of poly(ethylene glycol) diacrylate are presented. Implementation of the proposed system provides a novel research tool, which is expected to contribute to the expansion of knowledge on free-radical reactions in monomer- and polymer solutions, by delivering precise kinetic data on changes in molecular weight and size, and thus allowing to formulate or verify reaction mechanisms. The proposed method is universal and can be applied for studying both natural and synthetic polymers. The developed system can be also valuable in studies of the border of biology and medicine, especially on radical reactions of biopolymers and their conformational transitions. Furthermore, capability to follow fast changes in mass and dimensions of nanobjects may be of significant importance for nanoscience and nanotechnology.
Functional Performance Testing After Anterior Cruciate Ligament Reconstruction
Abrams, Geoffrey D.; Harris, Joshua D.; Gupta, Anil K.; McCormick, Frank M.; Bush-Joseph, Charles A.; Verma, Nikhil N.; Cole, Brian J.; Bach, Bernard R.
2014-01-01
Background: When to allow an athlete to return to unrestricted sporting activity after anterior cruciate ligament (ACL) reconstruction remains controversial. Purpose: To report the results of functional performance testing reported in the literature for individuals at differing time points following ACL reconstruction and to examine differences between graft types. Study Design: Systematic review; Level of evidence, 4. Methods: A systematic review of Medline, Scopus, and Cochrane Central Register of Controlled Trials was performed using PRISMA guidelines. Inclusion criteria were English-language studies that examined any functional rehabilitation test from 6 months to 2 years following ACL reconstruction. All patient-, limb-, and knee-specific demographics were extracted from included investigations. All functional rehabilitation tests were analyzed and compared when applicable. Results: The search term returned a total of 890 potential studies, with 88 meeting inclusion and exclusion criteria. A total of 4927 patients were included, of which 66% were male. The mean patient age was 26.5 ± 3.4 years. The predominant graft choices for reconstruction were bone–patellar tendon–bone (BPTB) autograft (59.8%) and hamstring autograft (37.9%). The most commonly reported functional tests were the hop tests. The results of these functional tests, as reported in the Limb Symmetry Index (LSI), improved with increasing time, with nearly all results greater than 90% at 1 year following primary ACL reconstruction. At 6 months postoperatively, a number of isokinetic strength measurements failed to reach 80% LSI, most commonly isokinetic knee extension testing in both BPTB and hamstring autograft groups. The knee flexion strength deficit was significantly less in the BPTB autograft group as compared with those having hamstring autograft at 1 year postoperatively, while no significant differences were found in isokinetic extension strength between the 2 groups. Conclusion: Hop testing was the most commonly reported functional test following ACL reconstruction. Increases in performance on functional tests were predictably seen as time increased following surgery. Those with hamstring autografts may experience increased strength deficits with knee flexion versus those having BPTB autograft. These data provide information that may assist providers in determining timing of return to unrestricted sporting activity. PMID:26535266
Ouellette, Samuel; Goyette, Marie-Hélène; Labbé, Caroline; Laur, Joan; Gaudreau, Linda; Gosselin, André; Dorais, Martine; Deshmukh, Rupesh K.; Bélanger, Richard R.
2017-01-01
Together with longer production periods, the commercial transition to day-neutral strawberry (Fragaria × ananassa) varieties has favored the development of diseases such as powdery mildew (Podosphaera aphanis) that thrives in late summer-early fall. In an attempt to find alternative solutions to fungicides currently employed to curb the disease, we wanted to investigate the potential of silicon (Si) amendments that have been associated with prophylactic properties against powdery mildews. To this end, our first objective was to determine if strawberry was a Si-competent species following the recent characterization of the properties of Si transporters that plants must carry to uptake silicic acid. Based on genomic data, we were able to conclude that strawberry contained both functional influx (Lsi1) and efflux (Lsi2) transporters for Si uptake. Subsequently commercial experiments under high tunnel and field conditions were conducted with different Si fertilization regimes: constant soluble Si feeding in high tunnel, and bi-weekly soluble Si feeding or three concentrations of calcium silicate fertilization in the field. Results from high tunnel experiments showed that strawberry could accumulate as much as 3% Si on a dry-weight basis, the highest concentration ever reported for this species. All six tested cultivars contained roughly the same concentration, thereby confirming the limited genetic variability, also observed in other species, associated with the trait. Silicon fertilization under high tunnel led to a significant reduction of powdery mildew severity in both years and on all cultivars, and a significant increase in yield of marketable fruits reaching as much as 300% with cv. Monterey. By contrast, Si fertilization under field conditions in soils deficient in plant available Si, either in soluble or solid form, did not result in significant accumulation of Si in plants, regardless of the cultivars, year or concentrations. Our results have thus provided both genotypic and phenotypic proof that strawberry can greatly benefit from Si fertilization, but have also highlighted the importance of validating the fertilization regime to ensure that Si is properly absorbed and/or available to the plant. PMID:28642768
Ginieri-Coccossis, M; Triantafillou, E; Tomaras, V; Soldatos, C; Mavreas, V; Christodoulou, G
2012-01-01
Τhe present study examines main psychometric properties of the World Health Organisation (WHO) quality of life (QoL) instrument, the WHOQOL-BREF with the inclusion of four national items. Participants were 425 adult native Greek speaking, grouped into patients with physical disorders, psychiatric disorders and healthy individuals. Participants were administered WHOQOL-BREF and 23 national items, the General Health Questionnaire (GHQ-28) and the Life Satisfaction Index (LSI). Confirmatory factor analysis produced acceptable fit values for the original model of 26 items within the four WHOQOL domains: physical health, psychological health, social relationships and environment. Testing for the fit of national items within this model, the results indicated four new items with the most satisfactory fit indices and were thus included forming a 30-items version. The national items refer to: (a) nutrition, (b) satisfaction with work (both loaded in the physical health domain), (c) home life and (d) social life (both loaded in the social relationships domain). Statistical tests were applied to the 26- and 30-items versions producing satisfactory results, with the 30-items version showing slightly better values. Furthermore, results on the 30-items version included: (a) internal consistency, which was found satisfactory, with alpha values ranging from α=0.67-0.81, while the inclusion of new items produced higher alpha values in physical health and social relationships domains, (b) construct validity with good item-domain correlations, as well as strong correlations between domain scores, (c) convergent validity, which was very satisfactory, showing good correlations with GHQ-28 and LSI, (d) discriminant validity, showing instrument's ability to detect QoL differences between healthy and unhealthy participants, and between physically ill and psychiatric patients, and (e) test-retest reliability, with ICC scores in excess of 0.80 obtaining for all domains. The WHOQOL-BREF Greek version was found to perform well with sick and healthy participants, demonstrating satisfactory psychometric properties. Use of the instrument may be recommended for clinical and general populations, for service or intervention evaluation, as well as for cross-cultural clinical trials.
Ouellette, Samuel; Goyette, Marie-Hélène; Labbé, Caroline; Laur, Joan; Gaudreau, Linda; Gosselin, André; Dorais, Martine; Deshmukh, Rupesh K; Bélanger, Richard R
2017-01-01
Together with longer production periods, the commercial transition to day-neutral strawberry ( Fragaria × ananassa ) varieties has favored the development of diseases such as powdery mildew ( Podosphaera aphanis ) that thrives in late summer-early fall. In an attempt to find alternative solutions to fungicides currently employed to curb the disease, we wanted to investigate the potential of silicon (Si) amendments that have been associated with prophylactic properties against powdery mildews. To this end, our first objective was to determine if strawberry was a Si-competent species following the recent characterization of the properties of Si transporters that plants must carry to uptake silicic acid. Based on genomic data, we were able to conclude that strawberry contained both functional influx (Lsi1) and efflux (Lsi2) transporters for Si uptake. Subsequently commercial experiments under high tunnel and field conditions were conducted with different Si fertilization regimes: constant soluble Si feeding in high tunnel, and bi-weekly soluble Si feeding or three concentrations of calcium silicate fertilization in the field. Results from high tunnel experiments showed that strawberry could accumulate as much as 3% Si on a dry-weight basis, the highest concentration ever reported for this species. All six tested cultivars contained roughly the same concentration, thereby confirming the limited genetic variability, also observed in other species, associated with the trait. Silicon fertilization under high tunnel led to a significant reduction of powdery mildew severity in both years and on all cultivars, and a significant increase in yield of marketable fruits reaching as much as 300% with cv. Monterey. By contrast, Si fertilization under field conditions in soils deficient in plant available Si, either in soluble or solid form, did not result in significant accumulation of Si in plants, regardless of the cultivars, year or concentrations. Our results have thus provided both genotypic and phenotypic proof that strawberry can greatly benefit from Si fertilization, but have also highlighted the importance of validating the fertilization regime to ensure that Si is properly absorbed and/or available to the plant.
Bodur, Hatice; Borman, Pinar; Ozdemir, Yildiz; Atan, Ciğdem; Kural, Gülcan
2006-05-01
Quality of life (QoL) and life satisfaction (LS) are important outcome factors in chronic inflammatory conditions such as Behçet's disease (BD). The aim of this study was to investigate QoL and LS in patients with BD and determine the relationship with disease activity. Forty-one patients with BD and 40 control subjects were involved in the study. Demographic properties were obtained. Disease activity was assessed by Turkish version of BD Current Activity Form (BDCAF) in BD patients. QoL and psychological well-being were assessed by Nottingham Health Profile (NHP) and Life Satisfaction Index (LSI), respectively, in both patients and control groups. The related disease activity measures of QoL and LS were determined. Twenty-two male and 19 female BD patients with a mean age of 33.3+/-9.3 years and 20 male and 20 female control subjects with a mean age of 33.3+/-4.1 years were involved. According to BDCAF, no patient had central nervous system involvement. Thirty-four patients had headache, 33 patients had fatigue, 30 patients had articular involvement, 29 had mucocutaneous lesions, 27 had gastrointestinal involvement, 21 patients had ocular involvement, and 7 patients had vascular involvement. The scores of all dimensions of NHP were significantly higher and the mean score of LSI was significantly lower in BD patients than in control subjects (p<0.001). Correlation analysis indicated that the scores of fatigue, joint involvement, and oral ulcers were the most related factors for physical domains of NHP, whereas joint involvement and genital ulcers were the most related activity measures for psychosocial subscales of NHP. LS was found to be most related with the scores of patient's and physician's impression of disease activity and joint involvement. In conclusion, patients with BD have impaired QoL and disturbed psychological well-being. Current management strategies focusing on fatigue, arthralgia, mucocutaneous lesions, and efforts to measure psychosocial aspects and symptoms of the patients by their point of view will help to improve QoL and raise the LS in patients suffering from BD.
Mems: Platform for Large-Scale Integrated Vacuum Electronic Circuits
2017-03-20
SECURITY CLASSIFICATION OF: The objective of the LIVEC advanced study project was to develop a platform for large-scale integrated vacuum electronic ...Distribution Unlimited UU UU UU UU 20-03-2017 1-Jul-2014 30-Jun-2015 Final Report: MEMS Platform for Large-Scale Integrated Vacuum Electronic ... Electronic Circuits (LIVEC) Contract No: W911NF-14-C-0093 COR Dr. James Harvey U.S. ARO RTP, NC 27709-2211 Phone: 702-696-2533 e-mail
Topological Properties of Some Integrated Circuits for Very Large Scale Integration Chip Designs
NASA Astrophysics Data System (ADS)
Swanson, S.; Lanzerotti, M.; Vernizzi, G.; Kujawski, J.; Weatherwax, A.
2015-03-01
This talk presents topological properties of integrated circuits for Very Large Scale Integration chip designs. These circuits can be implemented in very large scale integrated circuits, such as those in high performance microprocessors. Prior work considered basic combinational logic functions and produced a mathematical framework based on algebraic topology for integrated circuits composed of logic gates. Prior work also produced an historically-equivalent interpretation of Mr. E. F. Rent's work for today's complex circuitry in modern high performance microprocessors, where a heuristic linear relationship was observed between the number of connections and number of logic gates. This talk will examine topological properties and connectivity of more complex functionally-equivalent integrated circuits. The views expressed in this article are those of the author and do not reflect the official policy or position of the United States Air Force, Department of Defense or the U.S. Government.
MAINTAINING DATA QUALITY IN THE PERFORMANCE OF A LARGE SCALE INTEGRATED MONITORING EFFORT
Macauley, John M. and Linda C. Harwell. In press. Maintaining Data Quality in the Performance of a Large Scale Integrated Monitoring Effort (Abstract). To be presented at EMAP Symposium 2004: Integrated Monitoring and Assessment for Effective Water Quality Management, 3-7 May 200...
The Development and Validation of the Religious/Spiritually Integrated Practice Assessment Scale
ERIC Educational Resources Information Center
Oxhandler, Holly K.; Parrish, Danielle E.
2016-01-01
Objective: This article describes the development and validation of the Religious/Spiritually Integrated Practice Assessment Scale (RSIPAS). The RSIPAS is designed to assess social work practitioners' self-efficacy, attitudes, behaviors, and perceived feasibility concerning the assessment or integration of clients' religious and spiritual beliefs…
Resource integration and shared outcomes at the watershed scale
Eleanor S. Towns
2000-01-01
Shared resources are universal resources that are vital for sustaining communities, enhancing our quality of life and preserving ecosystem health. We have a shared responsibility to conserve shared resources and preserve their integrity for future generations. Resource integration is accomplished through ecosystem management, often at a watershed scale. The shared...
Structural Integrity in Measures of Self Concept.
ERIC Educational Resources Information Center
Stenner, A. Jackson; Katzenmeyer, W.G.
Structural integrity of a measure is defined in terms of its replicability, constancy, invariance, and stability. Work completed in the development and validation of the Self Observation Scales (SOS) Primary Level (Stenner and Katzenmeyer, 1973) serves to illustrate one method of establishing structural integrity. The name of each scale of the SOS…
Federal Register 2010, 2011, 2012, 2013, 2014
2011-03-17
... Integrated Circuit Semiconductor Chips and Products Containing the Same; Notice of a Commission Determination... certain large scale integrated circuit semiconductor chips and products containing same by reason of... existence of a domestic industry. The Commission's notice of investigation named several respondents...
Very Large Scale Integration (VLSI).
ERIC Educational Resources Information Center
Yeaman, Andrew R. J.
Very Large Scale Integration (VLSI), the state-of-the-art production techniques for computer chips, promises such powerful, inexpensive computing that, in the future, people will be able to communicate with computer devices in natural language or even speech. However, before full-scale VLSI implementation can occur, certain salient factors must be…
Generating and controlling homogeneous air turbulence using random jet arrays
NASA Astrophysics Data System (ADS)
Carter, Douglas; Petersen, Alec; Amili, Omid; Coletti, Filippo
2016-12-01
The use of random jet arrays, already employed in water tank facilities to generate zero-mean-flow homogeneous turbulence, is extended to air as a working fluid. A novel facility is introduced that uses two facing arrays of individually controlled jets (256 in total) to force steady homogeneous turbulence with negligible mean flow, shear, and strain. Quasi-synthetic jet pumps are created by expanding pressurized air through small straight nozzles and are actuated by fast-response low-voltage solenoid valves. Velocity fields, two-point correlations, energy spectra, and second-order structure functions are obtained from 2D PIV and are used to characterize the turbulence from the integral-to-the Kolmogorov scales. Several metrics are defined to quantify how well zero-mean-flow homogeneous turbulence is approximated for a wide range of forcing and geometric parameters. With increasing jet firing time duration, both the velocity fluctuations and the integral length scales are augmented and therefore the Reynolds number is increased. We reach a Taylor-microscale Reynolds number of 470, a large-scale Reynolds number of 74,000, and an integral-to-Kolmogorov length scale ratio of 680. The volume of the present homogeneous turbulence, the largest reported to date in a zero-mean-flow facility, is much larger than the integral length scale, allowing for the natural development of the energy cascade. The turbulence is found to be anisotropic irrespective of the distance between the jet arrays. Fine grids placed in front of the jets are effective at modulating the turbulence, reducing both velocity fluctuations and integral scales. Varying the jet-to-jet spacing within each array has no effect on the integral length scale, suggesting that this is dictated by the length scale of the jets.
Integrated simulation of continuous-scale and discrete-scale radiative transfer in metal foams
NASA Astrophysics Data System (ADS)
Xia, Xin-Lin; Li, Yang; Sun, Chuang; Ai, Qing; Tan, He-Ping
2018-06-01
A novel integrated simulation of radiative transfer in metal foams is presented. It integrates the continuous-scale simulation with the direct discrete-scale simulation in a single computational domain. It relies on the coupling of the real discrete-scale foam geometry with the equivalent continuous-scale medium through a specially defined scale-coupled zone. This zone holds continuous but nonhomogeneous volumetric radiative properties. The scale-coupled approach is compared to the traditional continuous-scale approach using volumetric radiative properties in the equivalent participating medium and to the direct discrete-scale approach employing the real 3D foam geometry obtained by computed tomography. All the analyses are based on geometrical optics. The Monte Carlo ray-tracing procedure is used for computations of the absorbed radiative fluxes and the apparent radiative behaviors of metal foams. The results obtained by the three approaches are in tenable agreement. The scale-coupled approach is fully validated in calculating the apparent radiative behaviors of metal foams composed of very absorbing to very reflective struts and that composed of very rough to very smooth struts. This new approach leads to a reduction in computational time by approximately one order of magnitude compared to the direct discrete-scale approach. Meanwhile, it can offer information on the local geometry-dependent feature and at the same time the equivalent feature in an integrated simulation. This new approach is promising to combine the advantages of the continuous-scale approach (rapid calculations) and direct discrete-scale approach (accurate prediction of local radiative quantities).
NASA Astrophysics Data System (ADS)
Cao, Zhanning; Li, Xiangyang; Sun, Shaohan; Liu, Qun; Deng, Guangxiao
2018-04-01
Aiming at the prediction of carbonate fractured-vuggy reservoirs, we put forward an integrated approach based on seismic and well data. We divide a carbonate fracture-cave system into four scales for study: micro-scale fracture, meso-scale fracture, macro-scale fracture and cave. Firstly, we analyze anisotropic attributes of prestack azimuth gathers based on multi-scale rock physics forward modeling. We select the frequency attenuation gradient attribute to calculate azimuth anisotropy intensity, and we constrain the result with Formation MicroScanner image data and trial production data to predict the distribution of both micro-scale and meso-scale fracture sets. Then, poststack seismic attributes, variance, curvature and ant algorithms are used to predict the distribution of macro-scale fractures. We also constrain the results with trial production data for accuracy. Next, the distribution of caves is predicted by the amplitude corresponding to the instantaneous peak frequency of the seismic imaging data. Finally, the meso-scale fracture sets, macro-scale fractures and caves are combined to obtain an integrated result. This integrated approach is applied to a real field in Tarim Basin in western China for the prediction of fracture-cave reservoirs. The results indicate that this approach can well explain the spatial distribution of carbonate reservoirs. It can solve the problem of non-uniqueness and improve fracture prediction accuracy.
Development status of the PDC-1 Parabolic Dish Concentrator
NASA Technical Reports Server (NTRS)
Thostesen, T.; Soczak, I. F.; Pons, R. L.
1982-01-01
The status of development of the 12 m diameter parabolic dish concentrator which is planned for use with the Small Community Solar Thermal Power System. The PDC-1 unit features the use of plastic reflector film bonded to structural plastic gores supported by front-bracing steel ribs. An elevation-over-azimuth mount arrangement is employed, with a conventional wheel-and-track arrangement; outboard trunnions permit the dish to be stored in the face down position, with the added advantage of easy access to the power conversion assembly. The control system is comprised of a central computer (LSI 1123), a manual control panel, a concentrator control unit, two motor controllers, a Sun sensor, and two angular position resolvers. The system is designed for the simultaneous control of several concentrators. The optical testing of reflective panels is described.
NASA Technical Reports Server (NTRS)
Bueker, P. A.
1982-01-01
The Nitrogen Washout System measures nitrogen elimination on a breath basis from the body tissues of a subject breathing pure oxygen. The system serves as a prototype for a Space Shuttle Life Sciences experiment and in the Environmental Physiology Laboratory. Typically, a subject washes out body nitrogen for three hours while breathing oxygen from a mask enclosed in a positive-pressure oxygen tent. A nitrogen washout requires one test operator and the test subject. A DEC LSI-11/02 computer is used to (1) control and calibrate the mass spectrometer and Skylab spirometer, (2) gather and store experimental data and (3) provide limited real time analysis and more extensive post-experiment analysis. Five programs are used to gather and store the experimental data and perform all the real time control and analysis.
NASA Technical Reports Server (NTRS)
Gassaway, J. D.
1976-01-01
Two approaches have been taken to study CCD's and some of their fundamental limitations. First a numerical analysis approach has been developed to solve the coupled transport and Poisson's equation for a thorough analysis of charge transfer in a CCD structure. The approach is formulated by treating the minority carriers as a surface distribution at the Si-SiO2 interface and setting up coupled difference equations for the charge and the potential. The SOR method is proposed for solving the two dimensional Poisson's equation for the potential. Methods are suggested for handling the discontinuities to improve convergence. Second, CCD shift registers were fabricated with parameters which should allow complete charge transfer independent of the transfer electrode gap width. A test instrument was designed and constructed which can be used to test this, or any similar, three phase CCD shift register.
Summary of workshop on the application of VLSI for robotic sensing
NASA Technical Reports Server (NTRS)
Brooks, T.; Wilcox, B.
1984-01-01
It was one of the objectives of the considered workshop to identify near, mid, and far-term applications of VLSI for robotic sensing and sensor data preprocessing. The workshop was also to indicate areas in which VLSI technology can provide immediate and future payoffs. A third objective is related to the promotion of dialog and collaborative efforts between research communities, industry, and government. The workshop was held on March 24-25, 1983. Conclusions and recommendations are discussed. Attention is given to the need for a pixel correction chip, an image sensor with 10,000 dynamic range, VLSI enhanced architectures, the need for a high-density serpentine memory, an LSI-tactile sensing program, an analog-signal preprocessor chip, a smart strain gage, a protective proximity envelope, a VLSI-proximity sensor program, a robot-net chip, and aspects of silicon micromechanics.
Using linear algebra for protein structural comparison and classification
2009-01-01
In this article, we describe a novel methodology to extract semantic characteristics from protein structures using linear algebra in order to compose structural signature vectors which may be used efficiently to compare and classify protein structures into fold families. These signatures are built from the pattern of hydrophobic intrachain interactions using Singular Value Decomposition (SVD) and Latent Semantic Indexing (LSI) techniques. Considering proteins as documents and contacts as terms, we have built a retrieval system which is able to find conserved contacts in samples of myoglobin fold family and to retrieve these proteins among proteins of varied folds with precision of up to 80%. The classifier is a web tool available at our laboratory website. Users can search for similar chains from a specific PDB, view and compare their contact maps and browse their structures using a JMol plug-in. PMID:21637532
Using linear algebra for protein structural comparison and classification.
Gomide, Janaína; Melo-Minardi, Raquel; Dos Santos, Marcos Augusto; Neshich, Goran; Meira, Wagner; Lopes, Júlio César; Santoro, Marcelo
2009-07-01
In this article, we describe a novel methodology to extract semantic characteristics from protein structures using linear algebra in order to compose structural signature vectors which may be used efficiently to compare and classify protein structures into fold families. These signatures are built from the pattern of hydrophobic intrachain interactions using Singular Value Decomposition (SVD) and Latent Semantic Indexing (LSI) techniques. Considering proteins as documents and contacts as terms, we have built a retrieval system which is able to find conserved contacts in samples of myoglobin fold family and to retrieve these proteins among proteins of varied folds with precision of up to 80%. The classifier is a web tool available at our laboratory website. Users can search for similar chains from a specific PDB, view and compare their contact maps and browse their structures using a JMol plug-in.
Design guidelines for advanced LSI microcircuit packaging using thick film multilayer technology
NASA Technical Reports Server (NTRS)
Peckinpaugh, C. J.
1974-01-01
Ceramic multilayer circuitry results from the sequential build-up of two or more layers of pre-determined conductive interconnections separated by dielectric layers and fired at an elevated temperature to form a solidly fused structure. The resultant ceramic interconnect matrix is used as a base to mount active and passive devices and provide the necessary electrical interconnection to accomplish the desired electrical circuit. Many methods are known for developing multilevel conductor mechanisms such as multilayer printed circuits, welded wire matrices, flexible copper tape conductors, and thin and thick-film ceramic multilayers. Each method can be considered as a specialized field with each possessing its own particular set of benefits and problems. This design guide restricts itself to the art of design, fabrication and assembly of ceramic multilayer circuitry and the reliability of the end product.
Size Scales for Thermal Inhomogeneities in Mars' Atmosphere Surface Layer: Mars Pathfinder
NASA Technical Reports Server (NTRS)
Mihalov, John D.; Haberle, Robert M.; Seiff, Alvin; Murphy, James R.; Schofield, John T.; DeVincenzi, Donald L. (Technical Monitor)
2000-01-01
Atmospheric temperature measurement at three heights with thin wire thermocouples on the 1.1 m Mars Pathfinder meteorology must allow estimates of the integral scale of the atmospheric thermal turbulence during an 83 sol period that begins in the summer. The integral scale is a measure for regions of perturbations. In turbulent media that roughly characterizes locations where the perturbations are correlated. Excluding some to intervals with violent excursions of the mean temperatures, integral scale values are found that increase relatively rapidly from a few tenths meters or less near down to several meters by mid-morning. During mid-morning, the diurnal and shorter time scale wind direction variations often place the meteorology mast in the thermal wake of the Lander.
Federal Register 2010, 2011, 2012, 2013, 2014
2010-05-05
... Integrated Circuit Semiconductor Chips and Products Containing Same; Notice of Investigation AGENCY: U.S... of certain large scale integrated circuit semiconductor chips and products containing same by reason... alleges that an industry in the United States exists as required by subsection (a)(2) of section 337. The...
Timing of Formal Phase Safety Reviews for Large-Scale Integrated Hazard Analysis
NASA Technical Reports Server (NTRS)
Massie, Michael J.; Morris, A. Terry
2010-01-01
Integrated hazard analysis (IHA) is a process used to identify and control unacceptable risk. As such, it does not occur in a vacuum. IHA approaches must be tailored to fit the system being analyzed. Physical, resource, organizational and temporal constraints on large-scale integrated systems impose additional direct or derived requirements on the IHA. The timing and interaction between engineering and safety organizations can provide either benefits or hindrances to the overall end product. The traditional approach for formal phase safety review timing and content, which generally works well for small- to moderate-scale systems, does not work well for very large-scale integrated systems. This paper proposes a modified approach to timing and content of formal phase safety reviews for IHA. Details of the tailoring process for IHA will describe how to avoid temporary disconnects in major milestone reviews and how to maintain a cohesive end-to-end integration story particularly for systems where the integrator inherently has little to no insight into lower level systems. The proposal has the advantage of allowing the hazard analysis development process to occur as technical data normally matures.
Cyclic Oxidation Behavior of Simulated Post-Weld Heat-Treated P91
NASA Astrophysics Data System (ADS)
Rajendran Pillai, S.; Dayal, R. K.
2011-10-01
For long-term service life it is desirable that the high-temperature components posses slow-growing oxide scale. The growth and degradation of the oxide scale on P91 were studied by a thermal cycling method. The oxidation temperature was 780 °C and the duration of each cycle was 2 h. The mass gain and integrity of the scale was examined using a thermogravimetric balance. Any lack of integrity is monitored by the transient mass gain associated with the exposure of fresh surface. The scale retained the integrity throughout 100 cycles. Post-oxidation examination was carried out by scanning electron microscopy, energy dispersive spectroscopy and laser Raman spectroscopy. The nature of the scale was characterized and the reason for the compositional segregation is analyzed.
Managing harvest and habitat as integrated components
Osnas, Erik; Runge, Michael C.; Mattsson, Brady J.; Austin, Jane E.; Boomer, G. S.; Clark, R. G.; Devers, P.; Eadie, J. M.; Lonsdorf, E. V.; Tavernia, Brian G.
2014-01-01
In 2007, several important initiatives in the North American waterfowl management community called for an integrated approach to habitat and harvest management. The essence of the call for integration is that harvest and habitat management affect the same resources, yet exist as separate endeavours with very different regulatory contexts. A common modelling framework could help these management streams to better understand their mutual effects. Particularly, how does successful habitat management increase harvest potential? Also, how do regional habitat programmes and large-scale harvest strategies affect continental population sizes (a metric used to express habitat goals)? In the ensuing five years, several projects took on different aspects of these challenges. While all of these projects are still on-going, and are not yet sufficiently developed to produce guidance for management decisions, they have been influential in expanding the dialogue and producing some important emerging lessons. The first lesson has been that one of the more difficult aspects of integration is not the integration across decision contexts, but the integration across spatial and temporal scales. Habitat management occurs at local and regional scales. Harvest management decisions are made at a continental scale. How do these actions, taken at different scales, combine to influence waterfowl population dynamics at all scales? The second lesson has been that consideration of the interface of habitat and harvest management can generate important insights into the objectives underlying the decision context. Often the objectives are very complex and trade-off against one another. The third lesson follows from the second – if an understanding of the fundamental objectives is paramount, there is no escaping the need for a better understanding of human dimensions, specifically the desires of hunters and nonhunters and the role they play in conservation. In the end, the compelling question is how to better understand, guide and justify decisions about conservation investments in waterfowl management. Future efforts to integrate harvest and habitat management will include completion of the species-specific case-studies, initiation of policy discussions around how to integrate the decision contexts and governing institutions, and possible consideration of a new level of integration – integration of harvest and habitats management decisions across waterfowl stocks.
Development of a survey instrument to measure patient experience of integrated care.
Walker, Kara Odom; Stewart, Anita L; Grumbach, Kevin
2016-06-01
Healthcare systems are working to move towards more integrated, patient-centered care. This study describes the development and testing of a multidimensional self-report measure of patients' experiences of integrated care. Random-digit-dial telephone survey in 2012 of 317 adults aged 40 years or older in the San Francisco region who had used healthcare at least twice in the past 12 months. One-time cross-sectional survey; psychometric evaluation to confirm dimensions and create multi-item scales. Survey data were analyzed using VARCLUS and confirmatory factor analysis and internal consistency reliability testing. Scales measuring five domains were confirmed: coordination within and between care teams, navigation (arranging appointments and visits), communication between specialist and primary care doctor, and communication between primary care doctor and specialist. Four of these demonstrated excellent internal consistency reliability. Mean scale scores indicated low levels of integration. These scales measuring integrated care capture meaningful domains of patients' experiences of health care. The low levels of care integration reported by patients in the study sample suggest that these types of measures should be considered in ongoing evaluations of health system performance and improvement. Further research should examine whether differences in patient experience of integrated care are associated with differences in the processes and outcomes of care received.
Reducing the two-loop large-scale structure power spectrum to low-dimensional, radial integrals
Schmittfull, Marcel; Vlah, Zvonimir
2016-11-28
Modeling the large-scale structure of the universe on nonlinear scales has the potential to substantially increase the science return of upcoming surveys by increasing the number of modes available for model comparisons. One way to achieve this is to model nonlinear scales perturbatively. Unfortunately, this involves high-dimensional loop integrals that are cumbersome to evaluate. Here, trying to simplify this, we show how two-loop (next-to-next-to-leading order) corrections to the density power spectrum can be reduced to low-dimensional, radial integrals. Many of those can be evaluated with a one-dimensional fast Fourier transform, which is significantly faster than the five-dimensional Monte-Carlo integrals thatmore » are needed otherwise. The general idea of this fast fourier transform perturbation theory method is to switch between Fourier and position space to avoid convolutions and integrate over orientations, leaving only radial integrals. This reformulation is independent of the underlying shape of the initial linear density power spectrum and should easily accommodate features such as those from baryonic acoustic oscillations. We also discuss how to account for halo bias and redshift space distortions.« less
An Instrument to Measure Maturity of Integrated Care: A First Validation Study
2018-01-01
Introduction: Lessons captured from interviews with 12 European regions are represented in a new instrument, the B3-Maturity Model (B3-MM). B3-MM aims to assess maturity along 12 dimensions reflecting the various aspects that need to be managed in order to deliver integrated care. The objective of the study was to test the content validity of B3-MM as part of SCIROCCO (Scaling Integrated Care into Context), a European Union funded project. Methods: A literature review was conducted to compare B3-MM’s 12 dimensions and their measurement scales with existing measures and instruments that focus on assessing the development of integrated care. Subsequently, a three-round survey conducted through a Delphi study with international experts in the field of integrated care was performed to test the relevance of: 1) the dimensions, 2) the maturity indicators and 3) the assessment scale used in B3-MM. Results: The 11 articles included in the literature review confirmed all the dimensions described in the original version of B3-MM. The Delphi study rounds resulted in various phrasing amendments of indicators and assessment scale. Full agreement among the experts on the relevance of the 12 B3-MM dimensions, their indicators, and assessment scale was reached after the third Delphi round. Conclusion and discussion: The B3-MM dimensions, maturity indicators and assessment scale showed satisfactory content validity. While the B3-MM is a unique instrument based on existing knowledge and experiences of regions in integrated care, further testing is needed to explore other measurement properties of B3-MM. PMID:29588644
Hardware in the Loop at Megawatt-Scale Power | Energy Systems Integration
Facility | NREL Hardware in the Loop at Megawatt-Scale Power Hardware in the Loop at Megawatt -Scale Power Hardware-in-the-loop simulation is not new, but the Energy System Integration Facility's -in-the-loop co-simulation. For more information, read the power hardware-in-the-loop factsheet. Text
Energy Systems Integration News | Energy Systems Integration Facility |
laboratories to attend the workshop on best practices for distributed energy resource (DER) security. Exploring grid. The U.S. Department of Energy (DOE) H2@Scale initiative is exploring the potential for wide-scale
Fractionaly Integrated Flux model and Scaling Laws in Weather and Climate
NASA Astrophysics Data System (ADS)
Schertzer, Daniel; Lovejoy, Shaun
2013-04-01
The Fractionaly Integrated Flux model (FIF) has been extensively used to model intermittent observables, like the velocity field, by defining them with the help of a fractional integration of a conservative (i.e. strictly scale invariant) flux, such as the turbulent energy flux. It indeed corresponds to a well-defined modelling that yields the observed scaling laws. Generalised Scale Invariance (GSI) enables FIF to deal with anisotropic fractional integrations and has been rather successful to define and model a unique regime of scaling anisotropic turbulence up to planetary scales. This turbulence has an effective dimension of 23/9=2.55... instead of the classical hypothesised 2D and 3D turbulent regimes, respectively for large and small spatial scales. It therefore theoretically eliminates a non plausible "dimension transition" between these two regimes and the resulting requirement of a turbulent energy "mesoscale gap", whose empirical evidence has been brought more and more into question. More recently, GSI-FIF was used to analyse climate, therefore at much larger time scales. Indeed, the 23/9-dimensional regime necessarily breaks up at the outer spatial scales. The corresponding transition range, which can be called "macroweather", seems to have many interesting properties, e.g. it rather corresponds to a fractional differentiation in time with a roughly flat frequency spectrum. Furthermore, this transition yields the possibility to have at much larger time scales scaling space-time climate fluctuations with a much stronger scaling anisotropy between time and space. Lovejoy, S. and D. Schertzer (2013). The Weather and Climate: Emergent Laws and Multifractal Cascades. Cambridge Press (in press). Schertzer, D. et al. (1997). Fractals 5(3): 427-471. Schertzer, D. and S. Lovejoy (2011). International Journal of Bifurcation and Chaos 21(12): 3417-3456.
NASA Astrophysics Data System (ADS)
Saksena, S.; Merwade, V.; Singhofen, P.
2017-12-01
There is an increasing global trend towards developing large scale flood models that account for spatial heterogeneity at watershed scales to drive the future flood risk planning. Integrated surface water-groundwater modeling procedures can elucidate all the hydrologic processes taking part during a flood event to provide accurate flood outputs. Even though the advantages of using integrated modeling are widely acknowledged, the complexity of integrated process representation, computation time and number of input parameters required have deterred its application to flood inundation mapping, especially for large watersheds. This study presents a faster approach for creating watershed scale flood models using a hybrid design that breaks down the watershed into multiple regions of variable spatial resolution by prioritizing higher order streams. The methodology involves creating a hybrid model for the Upper Wabash River Basin in Indiana using Interconnected Channel and Pond Routing (ICPR) and comparing the performance with a fully-integrated 2D hydrodynamic model. The hybrid approach involves simplification procedures such as 1D channel-2D floodplain coupling; hydrologic basin (HUC-12) integration with 2D groundwater for rainfall-runoff routing; and varying spatial resolution of 2D overland flow based on stream order. The results for a 50-year return period storm event show that hybrid model (NSE=0.87) performance is similar to the 2D integrated model (NSE=0.88) but the computational time is reduced to half. The results suggest that significant computational efficiency can be obtained while maintaining model accuracy for large-scale flood models by using hybrid approaches for model creation.
NASA Astrophysics Data System (ADS)
Factors affecting the atmospheric propagation of EM waves, research on the ionosphere, and advances in radar and communications technology are examined in reviews and reports. Topics discussed include refraction corrections for radio astronomy and geodesy, speckle masking, radar studies of atmospheric motion, EISCAT measurements in the polar electrojet, active experiments in the polar ionosphere, and dispersion relations for drift-Alfven and drift-acoustic waves. Consideration is given to a microcomputer prediction system for HF communications over Europe, frequency determination of a hyperfine line of CH4 at 88 THz, multipath propagation in digital mobile communication, a robust digital voice transmission technique for land mobile radio, CMOS LSI for digital signal processing in mobile radio equipment, the representation of EM fields by dyadic Green functions, scalarization of Maxwell's equations for anisotropic media, and satellite antennas for land vehicles and aircraft.
Reed Solomon codes for error control in byte organized computer memory systems
NASA Technical Reports Server (NTRS)
Lin, S.; Costello, D. J., Jr.
1984-01-01
A problem in designing semiconductor memories is to provide some measure of error control without requiring excessive coding overhead or decoding time. In LSI and VLSI technology, memories are often organized on a multiple bit (or byte) per chip basis. For example, some 256K-bit DRAM's are organized in 32Kx8 bit-bytes. Byte oriented codes such as Reed Solomon (RS) codes can provide efficient low overhead error control for such memories. However, the standard iterative algorithm for decoding RS codes is too slow for these applications. Some special decoding techniques for extended single-and-double-error-correcting RS codes which are capable of high speed operation are presented. These techniques are designed to find the error locations and the error values directly from the syndrome without having to use the iterative algorithm to find the error locator polynomial.
Dual-domain lateral shearing interferometer
Naulleau, Patrick P.; Goldberg, Kenneth Alan
2004-03-16
The phase-shifting point diffraction interferometer (PS/PDI) was developed to address the problem of at-wavelength metrology of extreme ultraviolet (EUV) optical systems. Although extremely accurate, the fact that the PS/PDI is limited to use with coherent EUV sources, such as undulator radiation, is a drawback for its widespread use. An alternative to the PS/PDI, with relaxed coherence requirements, is lateral shearing interferometry (LSI). The use of a cross-grating, carrier-frequency configuration to characterize a large-field 4.times.-reduction EUV lithography optic is demonstrated. The results obtained are directly compared with PS/PDI measurements. A defocused implementation of the lateral shearing interferometer in which an image-plane filter allows both phase-shifting and Fourier wavefront recovery. The two wavefront recovery methods can be combined in a dual-domain technique providing suppression of noise added by self-interference of high-frequency components in the test-optic wavefront.
Digital ultrasonics signal processing: Flaw data post processing use and description
NASA Technical Reports Server (NTRS)
Buel, V. E.
1981-01-01
A modular system composed of two sets of tasks which interprets the flaw data and allows compensation of the data due to transducer characteristics is described. The hardware configuration consists of two main units. A DEC LSI-11 processor running under the RT-11 sngle job, version 2C-02 operating system, controls the scanner hardware and the ultrasonic unit. A DEC PDP-11/45 processor also running under the RT-11, version 2C-02, operating system, stores, processes and displays the flaw data. The software developed the Ultrasonics Evaluation System, is divided into two catagories; transducer characterization and flaw classification. Each category is divided further into two functional tasks: a data acquisition and a postprocessor ask. The flaw characterization collects data, compresses its, and writes it to a disk file. The data is then processed by the flaw classification postprocessing task. The use and operation of a flaw data postprocessor is described.
SIG: a general-purpose signal processing program
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lager, D.; Azevedo, S.
1986-02-01
SIG is a general-purpose signal processing, analysis, and display program. Its main purpose is to perform manipulations on time- and frequency-domain signals. It also accommodates other representations for data such as transfer function polynomials. Signal processing operations include digital filtering, auto/cross spectral density, transfer function/impulse response, convolution, Fourier transform, and inverse Fourier transform. Graphical operations provide display of signals and spectra, including plotting, cursor zoom, families of curves, and multiple viewport plots. SIG provides two user interfaces with a menu mode for occasional users and a command mode for more experienced users. Capability exits for multiple commands per line, commandmore » files with arguments, commenting lines, defining commands, automatic execution for each item in a repeat sequence, etc. SIG is presently available for VAX(VMS), VAX (BERKELEY 4.2 UNIX), SUN (BERKELEY 4.2 UNIX), DEC-20 (TOPS-20), LSI-11/23 (TSX), and DEC PRO 350 (TSX). 4 refs., 2 figs.« less
NASA Technical Reports Server (NTRS)
Brucker, G. J.; Van Gunten, O.; Stassinopoulos, E. G.; Shapiro, P.; August, L. S.; Jordan, T. M.
1983-01-01
This paper reports on the recovery properties of rad-hard MOS devices during and after irradiation by electrons, protons, alphas, and gamma rays. The results indicated that complex recovery properties controlled the damage sensitivities of the tested parts. The results also indicated that damage sensitivities depended on dose rate, total dose, supply bias, gate bias, transistor type, radiation source, and particle energy. The complex nature of these dependencies make interpretation of LSI device performance in space (exposure to entire electron and proton spectra) difficult, if not impossible, without respective ground tests and analyses. Complete recovery of n-channel shifts was observed, in some cases within hours after irradiation, with equilibrium values of threshold voltages greater than their pre-irradiation values. This effect depended on total dose, radiation source, and gate bias during exposure. In contrast, the p-channel shifts recovered only 20 percent within 30 days after irradiation.
Optical interconnect technologies for high-bandwidth ICT systems
NASA Astrophysics Data System (ADS)
Chujo, Norio; Takai, Toshiaki; Mizushima, Akiko; Arimoto, Hideo; Matsuoka, Yasunobu; Yamashita, Hiroki; Matsushima, Naoki
2016-03-01
The bandwidth of information and communication technology (ICT) systems is increasing and is predicted to reach more than 10 Tb/s. However, an electrical interconnect cannot achieve such bandwidth because of its density limits. To solve this problem, we propose two types of high-density optical fiber wiring for backplanes and circuit boards such as interface boards and switch boards. One type uses routed ribbon fiber in a circuit board because it has the ability to be formed into complex shapes to avoid interfering with the LSI and electrical components on the board. The backplane is required to exhibit high density and flexibility, so the second type uses loose fiber. We developed a 9.6-Tb/s optical interconnect demonstration system using embedded optical modules, optical backplane, and optical connector in a network apparatus chassis. We achieved 25-Gb/s transmission between FPGAs via the optical backplane.
Decoding of DBEC-TBED Reed-Solomon codes. [Double-Byte-Error-Correcting, Triple-Byte-Error-Detecting
NASA Technical Reports Server (NTRS)
Deng, Robert H.; Costello, Daniel J., Jr.
1987-01-01
A problem in designing semiconductor memories is to provide some measure of error control without requiring excessive coding overhead or decoding time. In LSI and VLSI technology, memories are often organized on a multiple bit (or byte) per chip basis. For example, some 256 K bit DRAM's are organized in 32 K x 8 bit-bytes. Byte-oriented codes such as Reed-Solomon (RS) codes can provide efficient low overhead error control for such memories. However, the standard iterative algorithm for decoding RS codes is too slow for these applications. The paper presents a special decoding technique for double-byte-error-correcting, triple-byte-error-detecting RS codes which is capable of high-speed operation. This technique is designed to find the error locations and the error values directly from the syndrome without having to use the iterative algorithm to find the error locator polynomial.
Cross-scale phenological data integration to benefit resource management and monitoring
Richardson, Andrew D.; Weltzin, Jake F.; Morisette, Jeffrey T.
2017-01-01
Climate change is presenting new challenges for natural resource managers charged with maintaining sustainable ecosystems and landscapes. Phenology, a branch of science dealing with seasonal natural phenomena (bird migration or plant flowering in response to weather changes, for example), bridges the gap between the biosphere and the climate system. Phenological processes operate across scales that span orders of magnitude—from leaf to globe and from days to seasons—making phenology ideally suited to multiscale, multiplatform data integration and delivery of information at spatial and temporal scales suitable to inform resource management decisions.A workshop report: Workshop held June 2016 to investigate opportunities and challenges facing multi-scale, multi-platform integration of phenological data to support natural resource management decision-making.
NASA Technical Reports Server (NTRS)
Turner, Richard M.; Jared, David A.; Sharp, Gary D.; Johnson, Kristina M.
1993-01-01
The use of 2-kHz 64 x 64 very-large-scale integrated circuit/ferroelectric-liquid-crystal electrically addressed spatial light modulators as the input and filter planes of a VanderLugt-type optical correlator is discussed. Liquid-crystal layer thickness variations that are present in the devices are analyzed, and the effects on correlator performance are investigated through computer simulations. Experimental results from the very-large-scale-integrated / ferroelectric-liquid-crystal optical-correlator system are presented and are consistent with the level of performance predicted by the simulations.
Cornejo, Pablo K; Zhang, Qiong; Mihelcic, James R
2016-07-05
Energy and resource consumptions required to treat and transport wastewater have led to efforts to improve the environmental sustainability of wastewater treatment plants (WWTPs). Resource recovery can reduce the environmental impact of these systems; however, limited research has considered how the scale of implementation impacts the sustainability of WWTPs integrated with resource recovery. Accordingly, this research uses life cycle assessment (LCA) to evaluate how the scale of implementation impacts the environmental sustainability of wastewater treatment integrated with water reuse, energy recovery, and nutrient recycling. Three systems were selected: a septic tank with aerobic treatment at the household scale, an advanced water reclamation facility at the community scale, and an advanced water reclamation facility at the city scale. Three sustainability indicators were considered: embodied energy, carbon footprint, and eutrophication potential. This study determined that as with economies of scale, there are benefits to centralization of WWTPs with resource recovery in terms of embodied energy and carbon footprint; however, the community scale was shown to have the lowest eutrophication potential. Additionally, technology selection, nutrient control practices, system layout, and topographical conditions may have a larger impact on environmental sustainability than the implementation scale in some cases.
Semi-implicit time integration of atmospheric flows with characteristic-based flux partitioning
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ghosh, Debojyoti; Constantinescu, Emil M.
2016-06-23
Here, this paper presents a characteristic-based flux partitioning for the semi-implicit time integration of atmospheric flows. Nonhydrostatic models require the solution of the compressible Euler equations. The acoustic time scale is significantly faster than the advective scale, yet it is typically not relevant to atmospheric and weather phenomena. The acoustic and advective components of the hyperbolic flux are separated in the characteristic space. High-order, conservative additive Runge-Kutta methods are applied to the partitioned equations so that the acoustic component is integrated in time implicitly with an unconditionally stable method, while the advective component is integrated explicitly. The time step ofmore » the overall algorithm is thus determined by the advective scale. Benchmark flow problems are used to demonstrate the accuracy, stability, and convergence of the proposed algorithm. The computational cost of the partitioned semi-implicit approach is compared with that of explicit time integration.« less
NASA Astrophysics Data System (ADS)
Riley, W. J.; Dwivedi, D.; Ghimire, B.; Hoffman, F. M.; Pau, G. S. H.; Randerson, J. T.; Shen, C.; Tang, J.; Zhu, Q.
2015-12-01
Numerical model representations of decadal- to centennial-scale soil-carbon dynamics are a dominant cause of uncertainty in climate change predictions. Recent attempts by some Earth System Model (ESM) teams to integrate previously unrepresented soil processes (e.g., explicit microbial processes, abiotic interactions with mineral surfaces, vertical transport), poor performance of many ESM land models against large-scale and experimental manipulation observations, and complexities associated with spatial heterogeneity highlight the nascent nature of our community's ability to accurately predict future soil carbon dynamics. I will present recent work from our group to develop a modeling framework to integrate pore-, column-, watershed-, and global-scale soil process representations into an ESM (ACME), and apply the International Land Model Benchmarking (ILAMB) package for evaluation. At the column scale and across a wide range of sites, observed depth-resolved carbon stocks and their 14C derived turnover times can be explained by a model with explicit representation of two microbial populations, a simple representation of mineralogy, and vertical transport. Integrating soil and plant dynamics requires a 'process-scaling' approach, since all aspects of the multi-nutrient system cannot be explicitly resolved at ESM scales. I will show that one approach, the Equilibrium Chemistry Approximation, improves predictions of forest nitrogen and phosphorus experimental manipulations and leads to very different global soil carbon predictions. Translating model representations from the site- to ESM-scale requires a spatial scaling approach that either explicitly resolves the relevant processes, or more practically, accounts for fine-resolution dynamics at coarser scales. To that end, I will present recent watershed-scale modeling work that applies reduced order model methods to accurately scale fine-resolution soil carbon dynamics to coarse-resolution simulations. Finally, we contend that creating believable soil carbon predictions requires a robust, transparent, and community-available benchmarking framework. I will present an ILAMB evaluation of several of the above-mentioned approaches in ACME, and attempt to motivate community adoption of this evaluation approach.
Aon, Juan C; Sun, Jianxin; Leighton, Julie M; Appelbaum, Edward R
2016-08-15
In this study we examine the integrity of the cell wall during scale up of a yeast fermentation process from laboratory scale (10 L) to industrial scale (10,000 L). In a previous study we observed a clear difference in the volume fraction occupied by yeast cells as revealed by wet cell weight (WCW) measurements between these scales. That study also included metabolite analysis which suggested hypoxia during scale up. Here we hypothesize that hypoxia weakens the yeast cell wall during the scale up, leading to changes in cell permeability, and/or cell mechanical resistance, which in turn may lead to the observed difference in WCW. We tested the cell wall integrity by probing the cell wall sensitivity to Zymolyase. Also exometabolomics data showed changes in supply of precursors for the glycosylation pathway. The results show a more sensitive cell wall later in the production process at industrial scale, while the sensitivity at early time points was similar at both scales. We also report exometabolomics data, in particular a link with the protein glycosylation pathway. Significantly lower levels of Man6P and progressively higher GDP-mannose indicated partially impaired incorporation of this sugar nucleotide during co- or post-translational protein glycosylation pathways at the 10,000 L compared to the 10 L scale. This impairment in glycosylation would be expected to affect cell wall integrity. Although cell viability from samples obtained at both scales were similar, cells harvested from 10 L bioreactors were able to re-initiate growth faster in fresh shake flask media than those harvested from the industrial scale. The results obtained help explain the WCW differences observed at both scales by hypoxia-triggered weakening of the yeast cell wall during the scale up.
Integrative Systems Models of Cardiac Excitation Contraction Coupling
Greenstein, Joseph L.; Winslow, Raimond L.
2010-01-01
Excitation-contraction coupling in the cardiac myocyte is mediated by a number of highly integrated mechanisms of intracellular Ca2+ transport. The complexity and integrative nature of heart cell electrophysiology and Ca2+-cycling has led to an evolution of computational models that have played a crucial role in shaping our understanding of heart function. An important emerging theme in systems biology is that the detailed nature of local signaling events, such as those that occur in the cardiac dyad, have important consequences at higher biological scales. Multi-scale modeling techniques have revealed many mechanistic links between micro-scale events, such as Ca2+ binding to a channel protein, and macro-scale phenomena, such as excitation-contraction coupling gain. Here we review experimentally based multi-scale computational models of excitation-contraction coupling and the insights that have been gained through their application. PMID:21212390
Scale relativity theory and integrative systems biology: 1. Founding principles and scale laws.
Auffray, Charles; Nottale, Laurent
2008-05-01
In these two companion papers, we provide an overview and a brief history of the multiple roots, current developments and recent advances of integrative systems biology and identify multiscale integration as its grand challenge. Then we introduce the fundamental principles and the successive steps that have been followed in the construction of the scale relativity theory, and discuss how scale laws of increasing complexity can be used to model and understand the behaviour of complex biological systems. In scale relativity theory, the geometry of space is considered to be continuous but non-differentiable, therefore fractal (i.e., explicitly scale-dependent). One writes the equations of motion in such a space as geodesics equations, under the constraint of the principle of relativity of all scales in nature. To this purpose, covariant derivatives are constructed that implement the various effects of the non-differentiable and fractal geometry. In this first review paper, the scale laws that describe the new dependence on resolutions of physical quantities are obtained as solutions of differential equations acting in the scale space. This leads to several possible levels of description for these laws, from the simplest scale invariant laws to generalized laws with variable fractal dimensions. Initial applications of these laws to the study of species evolution, embryogenesis and cell confinement are discussed.
Thermochemical Users Facility | Bioenergy | NREL
collaborate on research and development efforts or to use our equipment to test their materials and processes NREL's thermochemical process integration, scale-up, and piloting research. Schematic diagram of NRELs about NREL's thermochemical process integration, scale-up, and piloting research. Thermochemical
INTEGRATION OF PHOTOCATALYTIC OXIDATION WITH AIR STRIPPING OF CONTAMINATED AQUIFERS
Bench scale laboratory studies and pilot scale studies in a simulated field-test situation were performed to evaluate the integration of gas-solid ultaviolet (UV) photocatalytic oxidation (PCO) downstream if an air stripper unit as a technology for cost-effectively treating water...
Studies of Sub-Synchronous Oscillations in Large-Scale Wind Farm Integrated System
NASA Astrophysics Data System (ADS)
Yue, Liu; Hang, Mend
2018-01-01
With the rapid development and construction of large-scale wind farms and grid-connected operation, the series compensation wind power AC transmission is gradually becoming the main way of power usage and improvement of wind power availability and grid stability, but the integration of wind farm will change the SSO (Sub-Synchronous oscillation) damping characteristics of synchronous generator system. Regarding the above SSO problem caused by integration of large-scale wind farms, this paper focusing on doubly fed induction generator (DFIG) based wind farms, aim to summarize the SSO mechanism in large-scale wind power integrated system with series compensation, which can be classified as three types: sub-synchronous control interaction (SSCI), sub-synchronous torsional interaction (SSTI), sub-synchronous resonance (SSR). Then, SSO modelling and analysis methods are categorized and compared by its applicable areas. Furthermore, this paper summarizes the suppression measures of actual SSO projects based on different control objectives. Finally, the research prospect on this field is explored.
Impact of basin scale and time-weighted mercury metrics on intra-/inter-basin mercury comparisons
Paul Bradley; Mark E. Brigham
2016-01-01
Understanding anthropogenic and environmental controls on fluvial Mercury (Hg) bioaccumulation over global and national gradients can be challenging due to the need to integrate discrete-sample results from numerous small scale investigations. Two fundamental issues for such integrative Hg assessments are the wide range of basin scales for included studies and how well...
Wayde c. Morse; Troy E. Hall; Linda E. Kruger
2008-01-01
In this article, we examine how issues of scale affect the integration of recreation management with the management of other natural resources on public lands. We present two theories used to address scale issues in ecology and explore how they can improve the two most widely applied recreation-planning frameworks. The theory of patch dynamics and hierarchy theory are...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Trujillo, Angelina Michelle
Strategy, Planning, Acquiring- very large scale computing platforms come and go and planning for immensely scalable machines often precedes actual procurement by 3 years. Procurement can be another year or more. Integration- After Acquisition, machines must be integrated into the computing environments at LANL. Connection to scalable storage via large scale storage networking, assuring correct and secure operations. Management and Utilization – Ongoing operations, maintenance, and trouble shooting of the hardware and systems software at massive scale is required.
Method and appartus for converting static in-ground vehicle scales into weigh-in-motion systems
Muhs, Jeffrey D.; Scudiere, Matthew B.; Jordan, John K.
2002-01-01
An apparatus and method for converting in-ground static weighing scales for vehicles to weigh-in-motion systems. The apparatus upon conversion includes the existing in-ground static scale, peripheral switches and an electronic module for automatic computation of the weight. By monitoring the velocity, tire position, axle spacing, and real time output from existing static scales as a vehicle drives over the scales, the system determines when an axle of a vehicle is on the scale at a given time, monitors the combined weight output from any given axle combination on the scale(s) at any given time, and from these measurements automatically computes the weight of each individual axle and gross vehicle weight by an integration, integration approximation, and/or signal averaging technique.
Shock, D A; LeBlanc, S J; Leslie, K E; Hand, K; Godkin, M A; Coe, J B; Kelton, D F
2015-06-01
Regionally aggregated bulk milk somatic cell count (BMSCC) data from around the world shows a repeatable cyclicity, with the highest levels experienced during warm, humid seasons. No studies have evaluated this seasonal phenomenon at the herd level. The objectives of this study were to define summer seasonality in BMSCC on an individual herd basis, and subsequently to describe the characteristics and dynamics of herds with increased BMSCC in the summer. The data used for this analysis were from all dairy farms in Ontario, Canada, between January 2000 and December 2011 (n≈4,000 to 6,000 herds/yr). Bulk milk data were obtained from the milk marketing board and consisted of bulk milk production, components (fat, protein, lactose, other solids), and quality (BMSCC, bacterial count, inhibitor presence, freezing point), total milk quota of the farm, and milk quota and incentive fill percentage. A time-series linear mixed model, with random slopes and intercepts, was constructed using sine and cosine terms as predictors to describe seasonality, with herd as a random effect. For each herd, seasonality was described with reference to 1 cosine function of variable amplitude and phase shift. The predicted months of maximal and minimal BMSCC were then calculated. Herds were assigned as low, medium, and high summer increase (LSI, MSI, and HSI, respectively) based on percentiles of amplitude in BMSCC change for each of the 4 seasons. Using these seasonality classifications, 2 transitional repeated measures logistic regression models were built to assess the characteristics of MSI and HSI herds, using LSI herds as controls. Based on the analyses performed, a history of summer BMSCC increases increased the odds of experiencing a subsequent increase. As herd size decreased, the odds of experiencing HSI to MSI in BMSCC increased. Herds with more variability in daily BMSCC were at higher odds of experiencing MSI and HSI in BMSCC, as were herds with lower annual mean BMSCC. Finally, a negative association was noted between filling herd production targets and experiencing MSI to HSI in BMSCC. These findings provide farm advisors direction for predicting herds likely to experience increases in SCC over the summer, allowing them to proactively focus udder health prevention strategies before the high-risk summer period. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Crump, Doug, E-mail: doug.crump@ec.gc.ca; Porter, Emily; Egloff, Caroline
1,2-Dibromo-4-(1,2-dibromoethyl)-cyclohexane (DBE-DBCH; formerly abbreviated as TBECH) and tris(methylphenyl) phosphate (TMPP; formerly abbreviated as TCP) are additive flame retardants that are detected in the environment and biota. A recent avian in vitro screening study of 16 flame retardants identified DBE-DBCH and TMPP as important chemicals for follow-up in ovo evaluation based on their effects on cytotoxicity and mRNA expression in avian hepatocytes. In this study, technical mixtures of DBE-DBCH and TMPP were injected into the air cell of chicken embryos at concentrations ranging from 0 to 54,900 ng/g and from 0 to 261,400 ng/g, respectively, to determine effects on pipping success,more » development, hepatic mRNA expression, thyroid hormone levels, and circulating bile acid concentrations. Both compounds were detectable in embryos at pipping and the β-DBE-DBCH isomer was depleted more rapidly than the α-isomer in tissue samples. DBE-DBCH had limited effects on the endpoints measured, with the exception of the up-regulation of two phase I metabolizing enzymes, CYP3A37 and CYP2H1. TMPP exposure caused embryonic deformities, altered growth, increased liver somatic index (LSI) and plasma bile acid concentrations, and altered mRNA expression levels of genes associated with xenobiotic and lipid metabolism and the thyroid hormone pathway. Overall, TMPP elicited more adverse molecular and phenotypic effects than DBE-DBCH albeit at concentrations several orders of magnitude greater than those detected in the environment. The increase in plasma bile acid concentrations was a useful phenotypic anchor as it was associated with a concomitant increase in LSI, discoloration of the liver tissue, and modulation of hepatic genes involved with xenobiotic and lipid metabolism. - Highlights: • DBE-DBCH and TMPP are not embryolethal to chicken embryos. • TMPP caused deformities, morphometric alterations, and increased plasma bile acids. • DBE-DBCH and TMPP altered mRNA levels of xenobiotic and lipid metabolism genes. • Elevated plasma bile acids suggest that TMPP causes liver dysfunction. • TMPP elicited more adverse molecular and phenotypic effects than DBE-DBCH.« less
A new heterogeneous asynchronous explicit-implicit time integrator for nonsmooth dynamics
NASA Astrophysics Data System (ADS)
Fekak, Fatima-Ezzahra; Brun, Michael; Gravouil, Anthony; Depale, Bruno
2017-07-01
In computational structural dynamics, particularly in the presence of nonsmooth behavior, the choice of the time-step and the time integrator has a critical impact on the feasibility of the simulation. Furthermore, in some cases, as in the case of a bridge crane under seismic loading, multiple time-scales coexist in the same problem. In that case, the use of multi-time scale methods is suitable. Here, we propose a new explicit-implicit heterogeneous asynchronous time integrator (HATI) for nonsmooth transient dynamics with frictionless unilateral contacts and impacts. Furthermore, we present a new explicit time integrator for contact/impact problems where the contact constraints are enforced using a Lagrange multiplier method. In other words, the aim of this paper consists in using an explicit time integrator with a fine time scale in the contact area for reproducing high frequency phenomena, while an implicit time integrator is adopted in the other parts in order to reproduce much low frequency phenomena and to optimize the CPU time. In a first step, the explicit time integrator is tested on a one-dimensional example and compared to Moreau-Jean's event-capturing schemes. The explicit algorithm is found to be very accurate and the scheme has generally a higher order of convergence than Moreau-Jean's schemes and provides also an excellent energy behavior. Then, the two time scales explicit-implicit HATI is applied to the numerical example of a bridge crane under seismic loading. The results are validated in comparison to a fine scale full explicit computation. The energy dissipated in the implicit-explicit interface is well controlled and the computational time is lower than a full-explicit simulation.
Vertical and lateral heterogeneous integration
NASA Astrophysics Data System (ADS)
Geske, Jon; Okuno, Yae L.; Bowers, John E.; Jayaraman, Vijay
2001-09-01
A technique for achieving large-scale monolithic integration of lattice-mismatched materials in the vertical direction and the lateral integration of dissimilar lattice-matched structures has been developed. The technique uses a single nonplanar direct-wafer-bond step to transform vertically integrated epitaxial structures into lateral epitaxial variation across the surface of a wafer. Nonplanar wafer bonding is demonstrated by integrating four different unstrained multi-quantum-well active regions lattice matched to InP on a GaAs wafer surface. Microscopy is used to verify the quality of the bonded interface, and photoluminescence is used to verify that the bonding process does not degrade the optical quality of the laterally integrated wells. The authors propose this technique as a means to achieve greater levels of wafer-scale integration in optical, electrical, and micromechanical devices.
DOT National Transportation Integrated Search
2006-12-01
Over the last several years, researchers at the University of Arizonas ATLAS Center have developed an adaptive ramp : metering system referred to as MILOS (Multi-Objective, Integrated, Large-Scale, Optimized System). The goal of this project : is ...
Threats to the ecological integrity of marine and estuarine systems operate over many spatial scales, from nutrient enrichment at watershed/estuarine linkages to invasive species and climate change at regional/global scales. Decision support tools and information systems needed t...
Community integration following multidisciplinary rehabilitation for traumatic brain injury.
Goranson, Tamara E; Graves, Roger E; Allison, Deborah; La Freniere, Ron
2003-09-01
To determine the extent to which participation in a multidisciplinary rehabilitation programme and patient characteristics predict improvement in community integration following mild-to-moderate traumatic brain injury (TBI). A non-randomized case-control study was conducted employing a pre-test-post-test multiple regression design. Archival data for 42 patients with mild-to-moderate TBI who completed the Community Integration Questionnaire (CIQ) at intake and again 6-18 months later were analysed. Half the sample participated in an intensive outpatient rehabilitation programme that provided multi-modal interventions, while the other half received no rehabilitation. The two groups were matched on age, education and time since injury. On the CIQ Home Integration scale, participation in rehabilitation and female gender predicted better outcome. On the Productivity scale, patients with a lower age at injury had better outcome. Outcome on both of these scales, as well as on the Social Integration scale, was predicted by the baseline pre-test score (initial severity). Overall, multidisciplinary rehabilitation appeared to increase personal independence. It is also concluded that: (1) multivariate analysis can reveal the relative importance of multiple predictors of outcome; (2) different predictors may predict different aspects of outcome; and (3) more sensitive and specific outcome measures are needed.
The Integrative Psychotherapy Alliance: Family, Couple and Individual Therapy Scales.
ERIC Educational Resources Information Center
Pinsof, William M.; Catherall, Donald R.
1986-01-01
Presents an integrative definition of the therapeutic alliance that conceptualizes individual, couple and family therapy as occurring within the same systemic framework. The implications of this concept for therapy reserach are examined. Three new systematically oriented scales to measure the alliance are presented along with some preliminary data…
A multi-scale metrics approach to forest fragmentation for Strategic Environmental Impact Assessment
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kim, Eunyoung, E-mail: eykim@kei.re.kr; Song, Wonkyong, E-mail: wksong79@gmail.com; Lee, Dongkun, E-mail: dklee7@snu.ac.kr
Forests are becoming severely fragmented as a result of land development. South Korea has responded to changing community concerns about environmental issues. The nation has developed and is extending a broad range of tools for use in environmental management. Although legally mandated environmental compliance requirements in South Korea have been implemented to predict and evaluate the impacts of land-development projects, these legal instruments are often insufficient to assess the subsequent impact of development on the surrounding forests. It is especially difficult to examine impacts on multiple (e.g., regional and local) scales in detail. Forest configuration and size, including forest fragmentationmore » by land development, are considered on a regional scale. Moreover, forest structure and composition, including biodiversity, are considered on a local scale in the Environmental Impact Assessment process. Recently, the government amended the Environmental Impact Assessment Act, including the SEA, EIA, and small-scale EIA, to require an integrated approach. Therefore, the purpose of this study was to establish an impact assessment system that minimizes the impacts of land development using an approach that is integrated across multiple scales. This study focused on forest fragmentation due to residential development and road construction sites in selected Congestion Restraint Zones (CRZs) in the Greater Seoul Area of South Korea. Based on a review of multiple-scale impacts, this paper integrates models that assess the impacts of land development on forest ecosystems. The applicability of the integrated model for assessing impacts on forest ecosystems through the SEIA process is considered. On a regional scale, it is possible to evaluate the location and size of a land-development project by considering aspects of forest fragmentation, such as the stability of the forest structure and the degree of fragmentation. On a local scale, land-development projects should consider the distances at which impacts occur in the vicinity of the forest ecosystem, and these considerations should include the impacts on forest vegetation and bird species. Impacts can be mitigated by considering the distances at which these influences occur. In particular, this paper presents an integrated environmental impact assessment system to be applied in the SEIA process. The integrated assessment system permits the assessment of the cumulative impacts of land development on multiple scales. -- Highlights: • The model is to assess the impact of forest fragmentation across multiple scales. • The paper suggests the type of forest fragmentation on a regional scale. • The type can be used to evaluate the location and size of a land development. • The paper shows the influence distance of land development on a local scale. • The distance can be used to mitigate the impact at an EIA process.« less
Micro-scale heat-exchangers for Joule-Thomson cooling.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Gross, Andrew John
2014-01-01
This project focused on developing a micro-scale counter flow heat exchangers for Joule-Thomson cooling with the potential for both chip and wafer scale integration. This project is differentiated from previous work by focusing on planar, thin film micromachining instead of bulk materials. A process will be developed for fabricating all the devices mentioned above, allowing for highly integrated micro heat exchangers. The use of thin film dielectrics provides thermal isolation, increasing efficiency of the coolers compared to designs based on bulk materials, and it will allow for wafer-scale fabrication and integration. The process is intended to implement a CFHX asmore » part of a Joule-Thomson cooling system for applications with heat loads less than 1mW. This report presents simulation results and investigation of a fabrication process for such devices.« less
Scale-adaptive compressive tracking with feature integration
NASA Astrophysics Data System (ADS)
Liu, Wei; Li, Jicheng; Chen, Xiao; Li, Shuxin
2016-05-01
Numerous tracking-by-detection methods have been proposed for robust visual tracking, among which compressive tracking (CT) has obtained some promising results. A scale-adaptive CT method based on multifeature integration is presented to improve the robustness and accuracy of CT. We introduce a keypoint-based model to achieve the accurate scale estimation, which can additionally give a prior location of the target. Furthermore, by the high efficiency of data-independent random projection matrix, multiple features are integrated into an effective appearance model to construct the naïve Bayes classifier. At last, an adaptive update scheme is proposed to update the classifier conservatively. Experiments on various challenging sequences demonstrate substantial improvements by our proposed tracker over CT and other state-of-the-art trackers in terms of dealing with scale variation, abrupt motion, deformation, and illumination changes.
Drageset, Jorunn; Espehaug, Birgitte; Kirkevold, Marit
2012-04-01
To analyse the relationships between depressive symptoms, sense of coherence and emotional and social loneliness among nursing home residents without cognitive impairment. Depression symptoms and loneliness are major health problems for older people. Sense of coherence, which is based on a salutogenic theoretical framework, is a strong determinant of positive health and successful coping and is associated with well-being and depression among older people. Few studies have explored the relationships between depression symptoms, sense of coherence and emotional and social loneliness among nursing home residents. A cross-sectional, descriptive, correlational design. Sample - 227 residents 65-102 years old from 30 nursing home residing ≥ six months. All had a Clinical Dementia Rating ≤ 0·5 and could converse. Residents were interviewed using the Social Provisions Scale, Geriatric Depression Scale and Sense of Coherence Scale (SOC-13). Possible relationships between these were analysed, controlled for sex, age, marital status, education, length of stay and comorbidity. Before adjustment, Geriatric Depression Scale was associated with attachment and social integration. After adjustment, Geriatric Depression Scale was still associated with attachment and social integration. Further adjusting for Sense of Coherence Scale reduced the association between Geriatric Depression Scale and attachment and even more so for the association between Geriatric Depression Scale and social integration. Sense of coherence and Geriatric Depression Scale did not interact, and SOC-13 was associated with attachment and social integration. Depression symptoms contribute to emotional and social loneliness. Independent of sense of coherence, depression symptoms are associated with emotional loneliness, sense of coherence influence emotional and social loneliness. Clinical nurses should observe residents closely for signs of depression and loneliness and support their sense of coherence to reduce emotional and social loneliness. © 2012 Blackwell Publishing Ltd.
Sale, Martin V.; Lord, Anton; Zalesky, Andrew; Breakspear, Michael; Mattingley, Jason B.
2015-01-01
Normal brain function depends on a dynamic balance between local specialization and large-scale integration. It remains unclear, however, how local changes in functionally specialized areas can influence integrated activity across larger brain networks. By combining transcranial magnetic stimulation with resting-state functional magnetic resonance imaging, we tested for changes in large-scale integration following the application of excitatory or inhibitory stimulation on the human motor cortex. After local inhibitory stimulation, regions encompassing the sensorimotor module concurrently increased their internal integration and decreased their communication with other modules of the brain. There were no such changes in modular dynamics following excitatory stimulation of the same area of motor cortex nor were there changes in the configuration and interactions between core brain hubs after excitatory or inhibitory stimulation of the same area. These results suggest the existence of selective mechanisms that integrate local changes in neural activity, while preserving ongoing communication between brain hubs. PMID:25717162
Maeng, Jimin; Meng, Chuizhou; Irazoqui, Pedro P
2015-02-01
We present wafer-scale integrated micro-supercapacitors on an ultrathin and highly flexible parylene platform, as progress toward sustainably powering biomedical microsystems suitable for implantable and wearable applications. All-solid-state, low-profile (<30 μm), and high-density (up to ~500 μF/mm(2)) micro-supercapacitors are formed on an ultrathin (~20 μm) freestanding parylene film by a wafer-scale parylene packaging process in combination with a polyaniline (PANI) nanowire growth technique assisted by surface plasma treatment. These micro-supercapacitors are highly flexible and shown to be resilient toward flexural stress. Further, direct integration of micro-supercapacitors into a radio frequency (RF) rectifying circuit is achieved on a single parylene platform, yielding a complete RF energy harvesting microsystem. The system discharging rate is shown to improve by ~17 times in the presence of the integrated micro-supercapacitors. This result suggests that the integrated micro-supercapacitor technology described herein is a promising strategy for sustainably powering biomedical microsystems dedicated to implantable and wearable applications.
Exploring the History of Time in an Integrated System: the Ramifications for Water
NASA Astrophysics Data System (ADS)
Green, M. B.; Adams, L. E.; Allen, T. L.; Arrigo, J. S.; Bain, D. J.; Bray, E. N.; Duncan, J. M.; Hermans, C. M.; Pastore, C.; Schlosser, C. A.; Vorosmarty, C. J.; Witherell, B. B.; Wollheim, W. M.; Wreschnig, A. J.
2009-12-01
Characteristic time scales are useful and simple descriptors of geophysical and socio-economic system dynamics. Focusing on the integrative nature of the hydrologic cycle, new insights into system couplings can be gained by compiling characteristic time scales of important processes driving these systems. There are many examples of changing characteristic time scales. Human life expectancy has increased over the recent history of medical advancement. The transport time of goods has decreased with the progression from horse to rail to car to plane. The transport time of information changed with the progression from letter to telegraph to telephone to networked computing. Soil residence time (pedogenesis to estuary deposition) has been influenced by changing agricultural technology, urbanization, and forest practices. Surface water residence times have varied as beaver dams have disappeared and been replaced with modern reservoirs, flood control works, and channelization. These dynamics raise the question of how these types of time scales interact with each other to form integrated Earth system dynamics? Here we explore the coupling of geophysical and socio-economic systems in the northeast United States over the 1600 to 2010 period by examining characteristic time scales. This visualization of many time scales serves as an exploratory analysis, producing new hypotheses about how the integrated system dynamics have evolved over the last 400 years. Specifically, exponential population growth and the evolving strategies to maintain that population appears as fundamental to many of the time scales.
Hervás, Gonzalo; Vázquez, Carmelo
2013-04-22
We introduce the Pemberton Happiness Index (PHI), a new integrative measure of well-being in seven languages, detailing the validation process and presenting psychometric data. The scale includes eleven items related to different domains of remembered well-being (general, hedonic, eudaimonic, and social well-being) and ten items related to experienced well-being (i.e., positive and negative emotional events that possibly happened the day before); the sum of these items produces a combined well-being index. A distinctive characteristic of this study is that to construct the scale, an initial pool of items, covering the remembered and experienced well-being domains, were subjected to a complete selection and validation process. These items were based on widely used scales (e.g., PANAS, Satisfaction With Life Scale, Subjective Happiness Scale, and Psychological Well-Being Scales). Both the initial items and reference scales were translated into seven languages and completed via Internet by participants (N = 4,052) aged 16 to 60 years from nine countries (Germany, India, Japan, Mexico, Russia, Spain, Sweden, Turkey, and USA). Results from this initial validation study provided very good support for the psychometric properties of the PHI (i.e., internal consistency, a single-factor structure, and convergent and incremental validity). Given the PHI's good psychometric properties, this simple and integrative index could be used as an instrument to monitor changes in well-being. We discuss the utility of this integrative index to explore well-being in individuals and communities.
2016-03-31
Corporation, Linthicum, Maryland *Corresponding author: Pavel.Borodulin@ngc.com Abstract: A chip -scale, highly-reconfigurable transmitter and...the technology has been used in a chip -scale, reconfigurable receiver demonstration and ongoing efforts to increase the level of performance and...circuit (RF-FPGA). It consists of a heterogeneous assembly of a SiGe BiCMOS chip with multiple 3D-integrated, low-loss, phase-change switch chiplets
Data integration in the era of omics: current and future challenges
2014-01-01
To integrate heterogeneous and large omics data constitutes not only a conceptual challenge but a practical hurdle in the daily analysis of omics data. With the rise of novel omics technologies and through large-scale consortia projects, biological systems are being further investigated at an unprecedented scale generating heterogeneous and often large data sets. These data-sets encourage researchers to develop novel data integration methodologies. In this introduction we review the definition and characterize current efforts on data integration in the life sciences. We have used a web-survey to assess current research projects on data-integration to tap into the views, needs and challenges as currently perceived by parts of the research community. PMID:25032990
Going the distance: spatial scale of athletic experience affects the accuracy of path integration.
Smith, Alastair D; Howard, Christina J; Alcock, Niall; Cater, Kirsten
2010-09-01
Evidence suggests that athletically trained individuals are more accurate than untrained individuals in updating their spatial position through idiothetic cues. We assessed whether training at different spatial scales affects the accuracy of path integration. Groups of rugby players (large-scale training) and martial artists (small-scale training) participated in a triangle-completion task: they were led (blindfolded) along two sides of a right-angled triangle and were required to complete the hypotenuse by returning to the origin. The groups did not differ in their assessment of the distance to the origin, but rugby players were more accurate than martial artists in assessing the correct angle to turn (heading), and landed significantly closer to the origin. These data support evidence that distance and heading components can be dissociated. Furthermore, they suggest that the spatial scale at which an individual is trained may affect the accuracy of one component of path integration but not the other.
Robopedia: Leveraging Sensorpedia for Web-Enabled Robot Control
DOE Office of Scientific and Technical Information (OSTI.GOV)
Resseguie, David R
There is a growing interest in building Internetscale sensor networks that integrate sensors from around the world into a single unified system. In contrast, robotics application development has primarily focused on building specialized systems. These specialized systems take scalability and reliability into consideration, but generally neglect exploring the key components required to build a large scale system. Integrating robotic applications with Internet-scale sensor networks will unify specialized robotics applications and provide answers to large scale implementation concerns. We focus on utilizing Internet-scale sensor network technology to construct a framework for unifying robotic systems. Our framework web-enables a surveillance robot smore » sensor observations and provides a webinterface to the robot s actuators. This lets robots seamlessly integrate into web applications. In addition, the framework eliminates most prerequisite robotics knowledge, allowing for the creation of general web-based robotics applications. The framework also provides mechanisms to create applications that can interface with any robot. Frameworks such as this one are key to solving large scale mobile robotics implementation problems. We provide an overview of previous Internetscale sensor networks, Sensorpedia (an ad-hoc Internet-scale sensor network), our framework for integrating robots with Sensorpedia, two applications which illustrate our frameworks ability to support general web-based robotic control, and offer experimental results that illustrate our framework s scalability, feasibility, and resource requirements.« less
Sound radiation from a subsonic rotor subjected to turbulence
NASA Technical Reports Server (NTRS)
Sevik, M.
1974-01-01
The broadband sound radiated by a subsonic rotor subjected to turbulence in the approach stream has been analyzed. The power spectral density of the sound intensity has been found to depend on a characteristic time scale-namely, the integral scale of the turbulence divided by the axial flow velocity-as well as several length-scale ratios. These consist of the ratio of the integral scale to the acoustic wavelength, rotor radius, and blade chord. Due to the simplified model chosen, only a limited number of cascade parameters appear. Limited comparisons with experimental data indicate good agreement with predicted values.
Silicon Hybrid Wafer Scale Integration Interconnect Evaluation
1989-12-01
perform Wafer Scale Integration on a routine basis is being vigorously pursued by a number of interests in military, academic , and commercial sectors...A iliciosi rip1 St -110 illic. (;11ptai / W. -a ;,tcd Ihat Ilesc hybhrid futl liods separiltely soI lie llixiiiul’upw~v~ ielts andl ~il (otii’ie thli
In a recently completed test program, bench-scale laboratory studies at Arizona State University (ASU) in Tempe, AZ, and pilot-scale studies in a simulated field test situation at Zentox Corp in Ocala, FL, were performed to evaluate the integration of gas-solid ultraviolet (UV) p...